3598 files changed, 285140 insertions, 80518 deletions

diff --git a/.gitignore b/.gitignore
index 51bd99d6a26..cecb3b040cc 100644
--- a/.gitignore
+++ b/.gitignore
@@ -3,7 +3,7 @@
 # subdirectories here. Add them in the ".gitignore" file
 # in that subdirectory instead.
 #
-# NOTE! Please use 'git-ls-files -i --exclude-standard'
+# NOTE! Please use 'git ls-files -i --exclude-standard'
 # command after changing this file, to see if there are
 # any tracked files which get ignored after the change.
 #
@@ -25,6 +25,8 @@
 *.elf
 *.bin
 *.gz
+*.lzma
+*.patch
 
 #
 # Top-level generic files
@@ -62,6 +64,12 @@ series
 cscope.*
 ncscope.*
 
+# gnu global files
+GPATH
+GRTAGS
+GSYMS
+GTAGS
+
 *.orig
 *~
 \#*#
diff --git a/CREDITS b/CREDITS
index 2520ba620ff..2b88fb37ad5 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1253,6 +1253,10 @@ S: 8124 Constitution Apt. 7
 S: Sterling Heights, Michigan 48313
 S: USA
 
+N: Wolfgang Grandegger
+E: wg@grandegger.com
+D: Controller Area Network (device drivers)
+
 N: William Greathouse
 E: wgreathouse@smva.com
 E: wgreathouse@myfavoritei.com
diff --git a/Documentation/Changes b/Documentation/Changes
index d21b3b5aa54..664392481c8 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -29,7 +29,7 @@ hardware, for example, you probably needn't concern yourself with
 isdn4k-utils.
 
 o  Gnu C                  3.2                     # gcc --version
-o  Gnu make               3.79.1                  # make --version
+o  Gnu make               3.80                    # make --version
 o  binutils               2.12                    # ld -v
 o  util-linux             2.10o                   # fdformat --version
 o  module-init-tools      0.9.10                  # depmod -V
@@ -62,7 +62,7 @@ computer.
 Make
 ----
 
-You will need Gnu make 3.79.1 or later to build the kernel.
+You will need Gnu make 3.80 or later to build the kernel.
 
 Binutils
 --------
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 72968cd5eaf..8bb37237ebd 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -698,8 +698,8 @@ very often is not. Abundant use of the inline keyword leads to a much bigger
 kernel, which in turn slows the system as a whole down, due to a bigger
 icache footprint for the CPU and simply because there is less memory
 available for the pagecache. Just think about it; a pagecache miss causes a
-disk seek, which easily takes 5 miliseconds. There are a LOT of cpu cycles
-that can go into these 5 miliseconds.
+disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles
+that can go into these 5 milliseconds.
 
 A reasonable rule of thumb is to not put inline at functions that have more
 than 3 lines of code in them. An exception to this rule are the cases where
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 25fb8bcf32a..5aceb88b3f8 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -676,8 +676,8 @@ this directory the following files can currently be found:
 	dma-api/all_errors	This file contains a numeric value. If this
 				value is not equal to zero the debugging code
 				will print a warning for every error it finds
-				into the kernel log. Be carefull with this
-				option. It can easily flood your logs.
+				into the kernel log. Be careful with this
+				option, as it can easily flood your logs.
 
 	dma-api/disabled	This read-only file contains the character 'Y'
 				if the debugging code is disabled. This can
diff --git a/Documentation/DocBook/debugobjects.tmpl b/Documentation/DocBook/debugobjects.tmpl
index 7f5f218015f..08ff908aa7a 100644
--- a/Documentation/DocBook/debugobjects.tmpl
+++ b/Documentation/DocBook/debugobjects.tmpl
@@ -106,7 +106,7 @@
       number of errors are printk'ed including a full stack trace.
     </para>
     <para>
-      The statistics are available via debugfs/debug_objects/stats.
+      The statistics are available via /sys/kernel/debug/debug_objects/stats.
       They provide information about the number of warnings and the
       number of successful fixups along with information about the
       usage of the internal tracking objects and the state of the
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index fbeaffc1dcc..e3698666357 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -145,7 +145,6 @@ usage should require reading the full document.
         interface in STA mode at first!
       </para>
 !Finclude/net/mac80211.h ieee80211_if_init_conf
-!Finclude/net/mac80211.h ieee80211_if_conf
     </chapter>
 
     <chapter id="rx-tx">
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 6389dec3345..93cb28d05dc 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -118,7 +118,7 @@ to another chain) checking the final 'nulls' value if
 the lookup met the end of chain. If final 'nulls' value
 is not the slot number, then we must restart the lookup at
 the beginning. If the object was moved to the same chain,
-then the reader doesnt care : It might eventually
+then the reader doesn't care : It might eventually
 scan the list again without harm.
 
 
diff --git a/Documentation/SM501.txt b/Documentation/SM501.txt
index 6fc65603592..561826f8209 100644
--- a/Documentation/SM501.txt
+++ b/Documentation/SM501.txt
@@ -5,7 +5,7 @@ Copyright 2006, 2007 Simtec Electronics
 
 The Silicon Motion SM501 multimedia companion chip is a multifunction device
 which may provide numerous interfaces including USB host controller USB gadget,
-Asyncronous Serial ports, Audio functions and a dual display video interface.
+asynchronous serial ports, audio functions, and a dual display video interface.
 The device may be connected by PCI or local bus with varying functions enabled.
 
 Core
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 6c456835c1f..5c555a8b39e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -187,8 +187,9 @@ Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey
-trivial@kernel.org managed by Jesper Juhl; which collects "trivial"
-patches. Trivial patches must qualify for one of the following rules:
+trivial@kernel.org which collects "trivial" patches. Have a look
+into the MAINTAINERS file for its current manager.
+Trivial patches must qualify for one of the following rules:
  Spelling fixes in documentation
  Spelling fixes which could break grep(1)
  Warning fixes (cluttering with useless warnings is bad)
@@ -200,7 +201,6 @@ patches. Trivial patches must qualify for one of the following rules:
  since people copy, as long as it's trivial)
  Any fix by the author/maintainer of the file (ie. patch monkey
  in re-transmission mode)
-URL: <http://www.kernel.org/pub/linux/kernel/people/juhl/trivial/>
 
 
 
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 7ea231172c8..aa73e72fd79 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -246,7 +246,8 @@ void print_ioacct(struct taskstats *t)
 
 int main(int argc, char *argv[])
 {
-	int c, rc, rep_len, aggr_len, len2, cmd_type;
+	int c, rc, rep_len, aggr_len, len2;
+	int cmd_type = TASKSTATS_CMD_ATTR_UNSPEC;
 	__u16 id;
 	__u32 mypid;
 
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index ea7ccfc4b27..948c8718d96 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -51,7 +51,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
 
@@ -65,11 +65,11 @@ Configuring a pin
 
   Eg:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 
-   which would turn GPA0 into the lowest Address line A0, and set
-   GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
 
 Reading the current configuration
diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
index 4ef24501045..396bec3b74e 100644
--- a/Documentation/atomic_ops.txt
+++ b/Documentation/atomic_ops.txt
@@ -229,10 +229,10 @@ kernel.  It is the use of atomic counters to implement reference
 counting, and it works such that once the counter falls to zero it can
 be guaranteed that no other entity can be accessing the object:
 
-static void obj_list_add(struct obj *obj)
+static void obj_list_add(struct obj *obj, struct list_head *head)
 {
 	obj->active = 1;
-	list_add(&obj->list);
+	list_add(&obj->list, head);
 }
 
 static void obj_list_del(struct obj *obj)
diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt
index 72576769e0f..2d82c80322c 100644
--- a/Documentation/block/deadline-iosched.txt
+++ b/Documentation/block/deadline-iosched.txt
@@ -58,7 +58,7 @@ same criteria as reads.
 front_merges	(bool)
 ------------
 
-Sometimes it happens that a request enters the io scheduler that is contigious
+Sometimes it happens that a request enters the io scheduler that is contiguous
 with a request that is already on the queue. Either it fits in the back of that
 request, or it fits at the front. That is called either a back merge candidate
 or a front merge candidate. Due to the way files are typically laid out,
diff --git a/Documentation/braille-console.txt b/Documentation/braille-console.txt
index 000b0fbdc10..d0d042c2fd5 100644
--- a/Documentation/braille-console.txt
+++ b/Documentation/braille-console.txt
@@ -27,7 +27,7 @@ parameter.
 
 For simplicity, only one braille console can be enabled, other uses of
 console=brl,... will be discarded.  Also note that it does not interfere with
-the console selection mecanism described in serial-console.txt
+the console selection mechanism described in serial-console.txt
 
 For now, only the VisioBraille device is supported.
 
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
index cf1f8126991..1c407778c8b 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.txt
@@ -117,7 +117,7 @@ Using the pktcdvd debugfs interface
 
 To read pktcdvd device infos in human readable form, do:
 
-	# cat /debug/pktcdvd/pktcdvd[0-7]/info
+	# cat /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/info
 
 For a description of the debugfs interface look into the file:
 
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index c11b931f8f9..15174985ad0 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -76,9 +76,9 @@ Do the steps below to download the BIOS image.
 
 The /sys/class/firmware/dell_rbu/ entries will remain till the following is
 done.
-echo -1 > /sys/class/firmware/dell_rbu/loading.
+echo -1 > /sys/class/firmware/dell_rbu/loading
 Until this step is completed the driver cannot be unloaded.
-Also echoing either mono ,packet or init in to image_type will free up the
+Also echoing either mono, packet or init in to image_type will free up the
 memory allocated by the driver.
 
 If a user by accident executes steps 1 and 3 above without executing step 2;
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index a7cbfff40d0..a124f3126b0 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -162,3 +162,35 @@ device_remove_file(dev,&dev_attr_power);
 
 The file name will be 'power' with a mode of 0644 (-rw-r--r--).
 
+Word of warning:  While the kernel allows device_create_file() and
+device_remove_file() to be called on a device at any time, userspace has
+strict expectations on when attributes get created.  When a new device is
+registered in the kernel, a uevent is generated to notify userspace (like
+udev) that a new device is available.  If attributes are added after the
+device is registered, then userspace won't get notified and userspace will
+not know about the new attributes.
+
+This is important for device driver that need to publish additional
+attributes for a device at driver probe time.  If the device driver simply
+calls device_create_file() on the device structure passed to it, then
+userspace will never be notified of the new attributes.  Instead, it should
+probably use class_create() and class->dev_attrs to set up a list of
+desired attributes in the modules_init function, and then in the .probe()
+hook, and then use device_create() to create a new device as a child
+of the probed device.  The new device will generate a new uevent and
+properly advertise the new attributes to userspace.
+
+For example, if a driver wanted to add the following attributes:
+struct device_attribute mydriver_attribs[] = {
+	__ATTR(port_count, 0444, port_count_show),
+	__ATTR(serial_number, 0444, serial_number_show),
+	NULL
+};
+
+Then in the module init function is would do:
+	mydriver_class = class_create(THIS_MODULE, "my_attrs");
+	mydriver_class.dev_attr = mydriver_attribs;
+
+And assuming 'dev' is the struct device passed into the probe hook, the driver
+probe function would do something like:
+	create_device(&mydriver_class, dev, chrdev, &private_data, "my_name");
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 387b8a720f4..d79aead9418 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -188,7 +188,7 @@ For example, you can do something like the following.
 
   void my_midlayer_destroy_something()
   {
-	devres_release_group(dev, my_midlayer_create_soemthing);
+	devres_release_group(dev, my_midlayer_create_something);
   }
 
 
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 2f21ecd4c20..a52adfc9a57 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -112,7 +112,7 @@ sub tda10045 {
 
 sub tda10046 {
 	my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
-	my $url = "http://technotrend-online.com/download/software/219/$sourcefile";
+	my $url = "http://www.tt-download.com/download/updates/219/$sourcefile";
 	my $hash = "6a7e1e2f2644b162ff0502367553c72d";
 	my $outfile = "dvb-fe-tda10046.fw";
 	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -129,8 +129,8 @@ sub tda10046 {
 }
 
 sub tda10046lifeview {
-    my $sourcefile = "Drv_2.11.02.zip";
-    my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
+    my $sourcefile = "7%5Cdrv_2.11.02.zip";
+    my $url = "http://www.lifeview.hk/dbimages/document/$sourcefile";
     my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
     my $outfile = "dvb-fe-tda10046.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -317,7 +317,7 @@ sub nxt2002 {
 
 sub nxt2004 {
     my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
-    my $url = "http://www.aver.com/support/Drivers/$sourcefile";
+    my $url = "http://www.avermedia-usa.com/support/Drivers/$sourcefile";
     my $hash = "111cb885b1e009188346d72acfed024c";
     my $outfile = "dvb-fe-nxt2004.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 8eda3fb6641..06f8f46692d 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -23,8 +23,8 @@ first time, it was renamed to 'EDAC'.
 The bluesmoke project at sourceforge.net is now utilized as a 'staging area'
 for EDAC development, before it is sent upstream to kernel.org
 
-At the bluesmoke/EDAC project site, is a series of quilt patches against
-recent kernels, stored in a SVN respository. For easier downloading, there
+At the bluesmoke/EDAC project site is a series of quilt patches against
+recent kernels, stored in a SVN repository. For easier downloading, there
 is also a tarball snapshot available.
 
 ============================================================================
@@ -73,9 +73,9 @@ the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-In the kernel there is a pci device attribute located in sysfs that is
+In the kernel there is a PCI device attribute located in sysfs that is
 checked by the EDAC PCI scanning code. If that attribute is set,
-PCI parity/error scannining is skipped for that device. The attribute
+PCI parity/error scanning is skipped for that device. The attribute
 is:
 
 	broken_parity_status
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 4bc374a1434..07930564079 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -29,16 +29,16 @@ o debugfs entries
 fault-inject-debugfs kernel module provides some debugfs entries for runtime
 configuration of fault-injection capabilities.
 
-- /debug/fail*/probability:
+- /sys/kernel/debug/fail*/probability:
 
 	likelihood of failure injection, in percent.
 	Format: <percent>
 
 	Note that one-failure-per-hundred is a very high error rate
 	for some testcases.  Consider setting probability=100 and configure
-	/debug/fail*/interval for such testcases.
+	/sys/kernel/debug/fail*/interval for such testcases.
 
-- /debug/fail*/interval:
+- /sys/kernel/debug/fail*/interval:
 
 	specifies the interval between failures, for calls to
 	should_fail() that pass all the other tests.
@@ -46,18 +46,18 @@ configuration of fault-injection capabilities.
 	Note that if you enable this, by setting interval>1, you will
 	probably want to set probability=100.
 
-- /debug/fail*/times:
+- /sys/kernel/debug/fail*/times:
 
 	specifies how many times failures may happen at most.
 	A value of -1 means "no limit".
 
-- /debug/fail*/space:
+- /sys/kernel/debug/fail*/space:
 
 	specifies an initial resource "budget", decremented by "size"
 	on each call to should_fail(,size).  Failure injection is
 	suppressed until "space" reaches zero.
 
-- /debug/fail*/verbose
+- /sys/kernel/debug/fail*/verbose
 
 	Format: { 0 | 1 | 2 }
 	specifies the verbosity of the messages when failure is
@@ -65,17 +65,17 @@ configuration of fault-injection capabilities.
 	log line per failure; '2' will print a call trace too -- useful
 	to debug the problems revealed by fault injection.
 
-- /debug/fail*/task-filter:
+- /sys/kernel/debug/fail*/task-filter:
 
 	Format: { 'Y' | 'N' }
 	A value of 'N' disables filtering by process (default).
 	Any positive value limits failures to only processes indicated by
 	/proc/<pid>/make-it-fail==1.
 
-- /debug/fail*/require-start:
-- /debug/fail*/require-end:
-- /debug/fail*/reject-start:
-- /debug/fail*/reject-end:
+- /sys/kernel/debug/fail*/require-start:
+- /sys/kernel/debug/fail*/require-end:
+- /sys/kernel/debug/fail*/reject-start:
+- /sys/kernel/debug/fail*/reject-end:
 
 	specifies the range of virtual addresses tested during
 	stacktrace walking.  Failure is injected only if some caller
@@ -84,26 +84,26 @@ configuration of fault-injection capabilities.
 	Default required range is [0,ULONG_MAX) (whole of virtual address space).
 	Default rejected range is [0,0).
 
-- /debug/fail*/stacktrace-depth:
+- /sys/kernel/debug/fail*/stacktrace-depth:
 
 	specifies the maximum stacktrace depth walked during search
 	for a caller within [require-start,require-end) OR
 	[reject-start,reject-end).
 
-- /debug/fail_page_alloc/ignore-gfp-highmem:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem:
 
 	Format: { 'Y' | 'N' }
 	default is 'N', setting it to 'Y' won't inject failures into
 	highmem/user allocations.
 
-- /debug/failslab/ignore-gfp-wait:
-- /debug/fail_page_alloc/ignore-gfp-wait:
+- /sys/kernel/debug/failslab/ignore-gfp-wait:
+- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait:
 
 	Format: { 'Y' | 'N' }
 	default is 'N', setting it to 'Y' will inject failures
 	only into non-sleep allocations (GFP_ATOMIC allocations).
 
-- /debug/fail_page_alloc/min-order:
+- /sys/kernel/debug/fail_page_alloc/min-order:
 
 	specifies the minimum page allocation order to be injected
 	failures.
@@ -166,13 +166,13 @@ o Inject slab allocation failures into module init/exit code
 #!/bin/bash
 
 FAILTYPE=failslab
-echo Y > /debug/$FAILTYPE/task-filter
-echo 10 > /debug/$FAILTYPE/probability
-echo 100 > /debug/$FAILTYPE/interval
-echo -1 > /debug/$FAILTYPE/times
-echo 0 > /debug/$FAILTYPE/space
-echo 2 > /debug/$FAILTYPE/verbose
-echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
+echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
 
 faulty_system()
 {
@@ -217,20 +217,20 @@ then
 	exit 1
 fi
 
-cat /sys/module/$module/sections/.text > /debug/$FAILTYPE/require-start
-cat /sys/module/$module/sections/.data > /debug/$FAILTYPE/require-end
+cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
+cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
 
-echo N > /debug/$FAILTYPE/task-filter
-echo 10 > /debug/$FAILTYPE/probability
-echo 100 > /debug/$FAILTYPE/interval
-echo -1 > /debug/$FAILTYPE/times
-echo 0 > /debug/$FAILTYPE/space
-echo 2 > /debug/$FAILTYPE/verbose
-echo 1 > /debug/$FAILTYPE/ignore-gfp-wait
-echo 1 > /debug/$FAILTYPE/ignore-gfp-highmem
-echo 10 > /debug/$FAILTYPE/stacktrace-depth
+echo N > /sys/kernel/debug/$FAILTYPE/task-filter
+echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+echo -1 > /sys/kernel/debug/$FAILTYPE/times
+echo 0 > /sys/kernel/debug/$FAILTYPE/space
+echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
+echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
+echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
 
-trap "echo 0 > /debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
+trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
 
 echo "Injecting errors into the module $module... (interrupt to stop)"
 sleep 1000000
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
index c87bfe5c630..b994c3b1054 100644
--- a/Documentation/fb/sh7760fb.txt
+++ b/Documentation/fb/sh7760fb.txt
@@ -1,7 +1,7 @@
 SH7760/SH7763 integrated LCDC Framebuffer driver
 ================================================
 
-0. Overwiew
+0. Overview
 -----------
 The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
 supports (in theory) resolutions ranging from 1x1 to 1024x1024,
diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt
index ee277dd204b..950d5a658cb 100644
--- a/Documentation/fb/vesafb.txt
+++ b/Documentation/fb/vesafb.txt
@@ -95,7 +95,7 @@ There is no way to change the vesafb video mode and/or timings after
 booting linux.  If you are not happy with the 60 Hz refresh rate, you
 have these options:
 
- * configure and load the DOS-Tools for your the graphics board (if
+ * configure and load the DOS-Tools for the graphics board (if
    available) and boot linux with loadlin.
  * use a native driver (matroxfb/atyfb) instead if vesafb.  If none
    is available, write a new one!
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index ec9ef5d0d7b..7129846a278 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -438,6 +438,13 @@ Why:	Superseded by tdfxfb. I2C/DDC support used to live in a separate
 Who:	Jean Delvare <khali@linux-fr.org>
 	Krzysztof Helt <krzysztof.h1@wp.pl>
 
+---------------------------
+
+What:	CONFIG_RFKILL_INPUT
+When:	2.6.33
+Why:	Should be implemented in userspace, policy daemon.
+Who:	Johannes Berg <johannes@sipsolutions.net>
+
 ----------------------------
 
 What:	CONFIG_X86_OLD_MCE
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index c6341745df3..8f78ded4b64 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -369,7 +369,7 @@ The call requires an initialized struct autofs_dev_ioctl. There are two
 possible variations. Both use the path field set to the path of the mount
 point to check and the size field adjusted appropriately. One uses the
 ioctlfd field to identify a specific mount point to check while the other
-variation uses the path and optionaly arg1 set to an autofs mount type.
+variation uses the path and optionally arg1 set to an autofs mount type.
 The call returns 1 if this is a mount point and sets arg1 to the device
 number of the mount and field arg2 to the relevant super block magic
 number (described below) or 0 if it isn't a mountpoint. In both cases
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 4db125b3a5c..2666b1ed5e9 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -184,7 +184,7 @@ This has the following fields:
      have index children.
 
      If this function is not supplied or if it returns NULL then the first
-     cache in the parent's list will be chosed, or failing that, the first
+     cache in the parent's list will be chosen, or failing that, the first
      cache in the master list.
 
  (4) A function to retrieve an object's key from the netfs [mandatory].
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 97882df0486..608fdba97b7 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -294,7 +294,7 @@ max_batch_time=usec	Maximum amount of time ext4 should wait for
 			amount of time (on average) that it takes to
 			finish committing a transaction.  Call this time
 			the "commit time".  If the time that the
-			transactoin has been running is less than the
+			transaction has been running is less than the
 			commit time, ext4 will try sleeping for the
 			commit time to see if other operations will join
 			the transaction.   The commit time is capped by
@@ -328,7 +328,7 @@ noauto_da_alloc		replacing existing files via patterns such as
 			journal commit, in the default data=ordered
 			mode, the data blocks of the new file are forced
 			to disk before the rename() operation is
-			commited.  This provides roughly the same level
+			committed.  This provides roughly the same level
 			of guarantees as ext3, and avoids the
 			"zero-length" problem that can happen when a
 			system crashes before the delayed allocation
@@ -358,7 +358,7 @@ written to the journal first, and then to its final location.
 In the event of a crash, the journal can be replayed, bringing both data and
 metadata into a consistent state.  This mode is the slowest except when data
 needs to be read from and written to disk at the same time where it
-outperforms all others modes.  Curently ext4 does not have delayed
+outperforms all others modes.  Currently ext4 does not have delayed
 allocation support if this data journalling mode is selected.
 
 References
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
index 1e3defcfe50..606233cd461 100644
--- a/Documentation/filesystems/fiemap.txt
+++ b/Documentation/filesystems/fiemap.txt
@@ -204,7 +204,7 @@ fiemap_check_flags() helper:
 
 int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);
 
-The struct fieinfo should be passed in as recieved from ioctl_fiemap(). The
+The struct fieinfo should be passed in as received from ioctl_fiemap(). The
 set of fiemap flags which the fs understands should be passed via fs_flags. If
 fiemap_check_flags finds invalid user flags, it will place the bad values in
 fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from
diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt
index 85eaeaddd27..e386f7e4bce 100644
--- a/Documentation/filesystems/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs-rdma.txt
@@ -100,7 +100,7 @@ Installation
     $ sudo cp utils/mount/mount.nfs /sbin/mount.nfs
 
     In this location, mount.nfs will be invoked automatically for NFS mounts
-    by the system mount commmand.
+    by the system mount command.
 
     NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed
     on the NFS client machine. You do not need this specific version of
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index 55c4300abfc..01539f41067 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -39,9 +39,8 @@ Features which NILFS2 does not support yet:
 	- extended attributes
 	- POSIX ACLs
 	- quotas
-	- writable snapshots
-	- remote backup (CDP)
-	- data integrity
+	- fsck
+	- resize
 	- defragmentation
 
 Mount options
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index ce84cfc9eae..ebff3c10a07 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -366,7 +366,7 @@ just those considered 'most important'.  The new vectors are:
   RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
   sent from one CPU to another per the needs of the OS.  Typically,
   their statistics are used by kernel developers and interested users to
-  determine the occurance of interrupt of the given type.
+  determine the occurrence of interrupts of the given type.
 
 The above IRQ vectors are displayed only when relevent.  For example,
 the threshold vector does not exist on x86_64 platforms.  Others are
@@ -551,7 +551,7 @@ Committed_AS: The amount of memory presently allocated on the system.
               memory once that memory has been successfully allocated.
 VmallocTotal: total size of vmalloc memory area
  VmallocUsed: amount of vmalloc area which is used
-VmallocChunk: largest contigious block of vmalloc area which is free
+VmallocChunk: largest contiguous block of vmalloc area which is free
 
 ..............................................................................
 
@@ -1003,11 +1003,13 @@ CHAPTER 3: PER-PROCESS PARAMETERS
 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
 ------------------------------------------------------
 
-This file can be used to adjust the score used to select which processes
-should be killed in an  out-of-memory  situation.  Giving it a high score will
-increase the likelihood of this process being killed by the oom-killer.  Valid
-values are in the range -16 to +15, plus the special value -17, which disables
-oom-killing altogether for this process.
+This file can be used to adjust the score used to select which processes should
+be killed in an out-of-memory situation.  The oom_adj value is a characteristic
+of the task's mm, so all threads that share an mm with pid will have the same
+oom_adj value.  A high value will increase the likelihood of this process being
+killed by the oom-killer.  Valid values are in the range -16 to +15 as
+explained below and a special value of -17, which disables oom-killing
+altogether for threads sharing pid's mm.
 
 The process to be killed in an out-of-memory situation is selected among all others
 based on its badness score. This value equals the original memory size of the process
@@ -1021,6 +1023,9 @@ the parent's score if they do not share the same memory. Thus forking servers
 are the prime candidates to be killed. Having only one 'hungry' child will make
 parent less preferable than the child.
 
+/proc/<pid>/oom_adj cannot be changed for kthreads since they are immune from
+oom-killing already.
+
 /proc/<pid>/oom_score shows process' current badness score.
 
 The following heuristics are then applied:
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 26e4b8bc53e..85354b32d73 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -72,7 +72,7 @@ The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
 call, and disable it following the access by writing "0" to the file.  Note
-that the device must be enabled for a rom read to return data succesfully.
+that the device must be enabled for a rom read to return data successfully.
 In the event a driver is not bound to the device, it can be enabled using the
 'enable' file, documented above.
 
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index 3a5ddc96901..b58b84b50fa 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -124,14 +124,19 @@ sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as
 flush         -- If set, the filesystem will try to flush to disk more
 		 early than normal. Not set by default.
 
-rodir	      -- FAT has the ATTR_RO (read-only) attribute. But on Windows,
-		 the ATTR_RO of the directory will be just ignored actually,
-		 and is used by only applications as flag. E.g. it's setted
-		 for the customized folder.
+rodir	      -- FAT has the ATTR_RO (read-only) attribute. On Windows,
+		 the ATTR_RO of the directory will just be ignored,
+		 and is used only by applications as a flag (e.g. it's set
+		 for the customized folder).
 
 		 If you want to use ATTR_RO as read-only flag even for
 		 the directory, set this option.
 
+errors=panic|continue|remount-ro
+	      -- specify FAT behavior on critical errors: panic, continue
+		 without doing anything or remount the partition in
+		 read-only mode (default behavior).
+
 <bool>: 0,1,yes,no,true,false
 
 TODO
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index c3480aa66ba..7eceaff63f5 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -77,7 +77,8 @@
    seconds for the whole load operation.
 
  - request_firmware_nowait() is also provided for convenience in
-   non-user contexts.
+   user contexts to request firmware asynchronously, but can't be called
+   in atomic contexts.
 
 
  about in-kernel persistence:
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 145c25a170c..e4b6985044a 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -458,7 +458,7 @@ debugfs interface, since it provides control over GPIO direction and
 value instead of just showing a gpio state summary.  Plus, it could be
 present on production systems without debugging support.
 
-Given approprate hardware documentation for the system, userspace could
+Given appropriate hardware documentation for the system, userspace could
 know for example that GPIO #23 controls the write protect line used to
 protect boot loader segments in flash memory.  System upgrade procedures
 may need to temporarily remove that protection, first importing a GPIO,
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index a8321267b5b..bee4c30bc1e 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -2,14 +2,18 @@ Kernel driver f71882fg
 ======================
 
 Supported chips:
-  * Fintek F71882FG and F71883FG
-    Prefix: 'f71882fg'
+  * Fintek F71858FG
+    Prefix: 'f71858fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
   * Fintek F71862FG and F71863FG
     Prefix: 'f71862fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71882FG and F71883FG
+    Prefix: 'f71882fg'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Available from the Fintek website
   * Fintek F8000
     Prefix: 'f8000'
     Addresses scanned: none, address read from Super I/O config space
@@ -66,13 +70,13 @@ printed when loading the driver.
 
 Three different fan control modes are supported; the mode number is written
 to the pwm#_enable file. Note that not all modes are supported on all
-chips, and some modes may only be available in RPM / PWM mode on the F8000.
+chips, and some modes may only be available in RPM / PWM mode.
 Writing an unsupported mode will result in an invalid parameter error.
 
 * 1: Manual mode
   You ask for a specific PWM duty cycle / DC voltage or a specific % of
   fan#_full_speed by writing to the pwm# file. This mode is only
-  available on the F8000 if the fan channel is in RPM mode.
+  available on the F71858FG / F8000 if the fan channel is in RPM mode.
 
 * 2: Normal auto mode
   You can define a number of temperature/fan speed trip points, which % the
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
index e98bdfea346..1e0d59e000b 100644
--- a/Documentation/hwmon/ibmaem
+++ b/Documentation/hwmon/ibmaem
@@ -7,7 +7,7 @@ henceforth as AEM.
 Supported systems:
   * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
-    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
     Prefix: 'ibmaem'
     Datasheet: Not available
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 004ee161721..dcbd502c879 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -70,6 +70,7 @@ are interpreted as 0! For more on how written strings are interpreted see the
 [0-*]	denotes any positive number starting from 0
 [1-*]	denotes any positive number starting from 1
 RO	read only value
+WO	write only value
 RW	read/write value
 
 Read/write values may be read-only for some chips, depending on the
@@ -295,6 +296,24 @@ temp[1-*]_label	Suggested temperature channel label.
 		user-space.
 		RO
 
+temp[1-*]_lowest
+		Historical minimum temperature
+		Unit: millidegree Celsius
+		RO
+
+temp[1-*]_highest
+		Historical maximum temperature
+		Unit: millidegree Celsius
+		RO
+
+temp[1-*]_reset_history
+		Reset temp_lowest and temp_highest
+		WO
+
+temp_reset_history
+		Reset temp_lowest and temp_highest for all sensors
+		WO
+
 Some chips measure temperature using external thermistors and an ADC, and
 report the temperature measurement as a voltage. Converting this voltage
 back to a temperature (or the other way around for limits) requires
diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401
new file mode 100644
index 00000000000..9fc44724921
--- /dev/null
+++ b/Documentation/hwmon/tmp401
@@ -0,0 +1,42 @@
+Kernel driver tmp401
+====================
+
+Supported chips:
+  * Texas Instruments TMP401
+    Prefix: 'tmp401'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
+  * Texas Instruments TMP411
+    Prefix: 'tmp411'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
+
+Authors:
+         Hans de Goede <hdegoede@redhat.com>
+	 Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP401 and
+TMP411 chips. These chips implements one remote and one local
+temperature sensor. Temperature is measured in degrees
+Celsius. Resolution of the remote sensor is 0.0625 degree. Local
+sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
+supported by the driver so far, so using the default resolution of 0.5
+degree).
+
+The driver provides the common sysfs-interface for temperatures (see
+/Documentation/hwmon/sysfs-interface under Temperatures).
+
+The TMP411 chip is compatible with TMP401. It provides some additional
+features.
+
+* Minimum and Maximum temperature measured since power-on, chip-reset
+
+  Exported via sysfs attributes tempX_lowest and tempX_highest.
+
+* Reset of historical minimum/maximum temperature measurements
+
+  Exported via sysfs attribute temp_reset_history. Writing 1 to this
+  file triggers a reset.
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index b6eb59384bb..02b74899eda 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -12,6 +12,10 @@ Supported chips:
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet:
         http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf
+  * Winbond W83627DHG-P
+    Prefix: 'w83627dhg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: not available
   * Winbond W83667HG
     Prefix: 'w83667hg'
     Addresses scanned: ISA address retrieved from Super I/O registers
@@ -28,8 +32,8 @@ Description
 -----------
 
 This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG and W83667HG super I/O chips. We will refer to them collectively
-as Winbond chips.
+W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
+collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
@@ -135,3 +139,6 @@ done in the driver for all register addresses.
 The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and
 the ICH8 southbridge gets that data via PECI from the DHG, so that the
 southbridge drives the fans. And the DHG supports SST, a one-wire serial bus.
+
+The DHG-P has an additional automatic fan speed control mode named Smart Fan
+(TM) III+. This mode is not yet supported by the driver.
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 22efedf60c8..2e758b0e945 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -19,6 +19,9 @@ Supported adapters:
   * VIA Technologies, Inc. VX800/VX820
     Datasheet: available on http://linux.via.com.tw
 
+  * VIA Technologies, Inc. VX855/VX875
+    Datasheet: Availability unknown
+
 Authors:
 	Kyösti Mälkki <kmalkki@cc.hut.fi>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -53,6 +56,7 @@ Your lspci -n listing must show one of these :
  device 1106:3287   (VT8251)
  device 1106:8324   (CX700)
  device 1106:8353   (VX800/VX820)
+ device 1106:8409   (VX855/VX875)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.
diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX
index 5a2d69989a8..f6010a53659 100644
--- a/Documentation/isdn/00-INDEX
+++ b/Documentation/isdn/00-INDEX
@@ -22,16 +22,11 @@ README.gigaset
 	- info on the drivers for Siemens Gigaset ISDN adapters.
 README.icn
 	- info on the ICN-ISDN-card and its driver.
+>>>>>>> 93af7aca44f0e82e67bda10a0fb73d383edcc8bd:Documentation/isdn/00-INDEX
 README.HiSax
 	- info on the HiSax driver which replaces the old teles.
-README.hfc-pci
-	- info on hfc-pci based cards.
-README.pcbit
-	- info on the PCBIT-D ISDN adapter and driver.
-README.syncppp
-	- info on running Sync PPP over ISDN.
-syncPPP.FAQ
-	- frequently asked questions about running PPP over ISDN.
+README.audio
+	- info for running audio over ISDN.
 README.avmb1
 	- info on driver for AVM-B1 ISDN card.
 README.act2000
@@ -42,10 +37,28 @@ README.concap
 	- info on "CONCAP" encapsulation protocol interface used for X.25.
 README.diversion
 	- info on module for isdn diversion services.
+README.fax
+	- info for using Fax over ISDN.
+README.gigaset
+	- info on the drivers for Siemens Gigaset ISDN adapters
+README.hfc-pci
+	- info on hfc-pci based cards.
+README.hysdn
+        - info on driver for Hypercope active HYSDN cards
+README.icn
+	- info on the ICN-ISDN-card and its driver.
+README.mISDN
+	- info on the Modular ISDN subsystem (mISDN)
+README.pcbit
+	- info on the PCBIT-D ISDN adapter and driver.
 README.sc
 	- info on driver for Spellcaster cards.
+README.syncppp
+	- info on running Sync PPP over ISDN.
 README.x25
 	- info for running X.25 over ISDN.
+syncPPP.FAQ
+	- frequently asked questions about running PPP over ISDN.
 README.hysdn
 	- info on driver for Hypercope active HYSDN cards
 README.mISDN
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 786d619b36e..686e107923e 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -45,7 +45,7 @@ From then on, Kernel CAPI may call the registered callback functions for the
 device.
 
 If the device becomes unusable for any reason (shutdown, disconnect ...), the
-driver has to call capi_ctr_reseted(). This will prevent further calls to the
+driver has to call capi_ctr_down(). This will prevent further calls to the
 callback functions by Kernel CAPI.
 
 
@@ -114,20 +114,36 @@ char *driver_name
 int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
 	(optional) pointer to a callback function for sending firmware and
 	configuration data to the device
+	Return value: 0 on success, error code on error
+	Called in process context.
 
 void (*reset_ctr)(struct capi_ctr *ctrlr)
-	pointer to a callback function for performing a reset on the device,
-	releasing all registered applications
+	(optional) pointer to a callback function for performing a reset on
+	the device, releasing all registered applications
+	Called in process context.
 
 void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
 			capi_register_params *rparam)
 void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
 	pointers to callback functions for registration and deregistration of
 	applications with the device
+	Calls to these functions are serialized by Kernel CAPI so that only
+	one call to any of them is active at any time.
 
 u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	pointer to a callback function for sending a CAPI message to the
 	device
+	Return value: CAPI error code
+	If the method returns 0 (CAPI_NOERROR) the driver has taken ownership
+	of the skb and the caller may no longer access it. If it returns a
+	non-zero (error) value then ownership of the skb returns to the caller
+	who may reuse or free it.
+	The return value should only be used to signal problems with respect
+	to accepting or queueing the message. Errors occurring during the
+	actual processing of the message should be signaled with an
+	appropriate reply message.
+	Calls to this function are not serialized by Kernel CAPI, ie. it must
+	be prepared to be re-entered.
 
 char *(*procinfo)(struct capi_ctr *ctrlr)
 	pointer to a callback function returning the entry for the device in
@@ -138,6 +154,8 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
+Note: Callback functions are never called in interrupt context.
+
 - to be filled in before calling capi_ctr_ready():
 
 u8 manu[CAPI_MANUFACTURER_LEN]
@@ -153,6 +171,45 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
+4.3 The _cmsg Structure
+
+(declared in <linux/isdn/capiutil.h>)
+
+The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
+accessible form. It contains members for all possible CAPI 2.0 parameters, of
+which only those appearing in the message type currently being processed are
+actually used. Unused members should be set to zero.
+
+Members are named after the CAPI 2.0 standard names of the parameters they
+represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
+types are:
+
+u8          for CAPI parameters of type 'byte'
+
+u16         for CAPI parameters of type 'word'
+
+u32         for CAPI parameters of type 'dword'
+
+_cstruct    for CAPI parameters of type 'struct' not containing any
+	    variably-sized (struct) subparameters (eg. 'Called Party Number')
+	    The member is a pointer to a buffer containing the parameter in
+	    CAPI encoding (length + content). It may also be NULL, which will
+	    be taken to represent an empty (zero length) parameter.
+
+_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
+	    subparameters ('Additional Info' and 'B Protocol')
+	    The representation is a single byte containing one of the values:
+	    CAPI_DEFAULT: the parameter is empty
+	    CAPI_COMPOSE: the values of the subparameters are stored
+	    individually in the corresponding _cmsg structure members
+
+Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
+messages between their transport encoding described in the CAPI 2.0 standard
+and their _cmsg structure representation. Note that capi_cmsg2message() does
+not know or check the size of its destination buffer. The caller must make
+sure it is big enough to accomodate the resulting CAPI message.
+
+
 5. Lower Layer Interface Functions
 
 (declared in <linux/isdn/capilli.h>)
@@ -166,7 +223,7 @@ int detach_capi_ctr(struct capi_ctr *ctrlr)
 	register/unregister a device (controller) with Kernel CAPI
 
 void capi_ctr_ready(struct capi_ctr *ctrlr)
-void capi_ctr_reseted(struct capi_ctr *ctrlr)
+void capi_ctr_down(struct capi_ctr *ctrlr)
 	signal controller ready/not ready
 
 void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
@@ -211,3 +268,32 @@ CAPIMSG_CONTROL(m)	CAPIMSG_SETCONTROL(m, contr)	Controller/PLCI/NCCI
 							(u32)
 CAPIMSG_DATALEN(m)	CAPIMSG_SETDATALEN(m, len)	Data Length (u16)
 
+
+Library functions for working with _cmsg structures
+(from <linux/isdn/capiutil.h>):
+
+unsigned capi_cmsg2message(_cmsg *cmsg, u8 *msg)
+	Assembles a CAPI 2.0 message from the parameters in *cmsg, storing the
+	result in *msg.
+
+unsigned capi_message2cmsg(_cmsg *cmsg, u8 *msg)
+	Disassembles the CAPI 2.0 message in *msg, storing the parameters in
+	*cmsg.
+
+unsigned capi_cmsg_header(_cmsg *cmsg, u16 ApplId, u8 Command, u8 Subcommand,
+			  u16 Messagenumber, u32 Controller)
+	Fills the header part and address field of the _cmsg structure *cmsg
+	with the given values, zeroing the remainder of the structure so only
+	parameters with non-default values need to be changed before sending
+	the message.
+
+void capi_cmsg_answer(_cmsg *cmsg)
+	Sets the low bit of the Subcommand field in *cmsg, thereby converting
+	_REQ to _CONF and _IND to _RESP.
+
+char *capi_cmd2str(u8 Command, u8 Subcommand)
+	Returns the CAPI 2.0 message name corresponding to the given command
+	and subcommand values, as a static ASCII string. The return value may
+	be NULL if the command/subcommand is not one of those defined in the
+	CAPI 2.0 standard.
+
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 02c0e9341dd..f9963103ae3 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -149,10 +149,8 @@ GigaSet 307x Device Driver
      configuration files and chat scripts in the gigaset-VERSION/ppp directory
      in the driver packages from http://sourceforge.net/projects/gigaset307x/.
      Please note that the USB drivers are not able to change the state of the
-     control lines (the M105 driver can be configured to use some undocumented
-     control requests, if you really need the control lines, though). This means
-     you must use "Stupid Mode" if you are using wvdial or you should use the
-     nocrtscts option of pppd.
+     control lines. This means you must use "Stupid Mode" if you are using
+     wvdial or you should use the nocrtscts option of pppd.
      You must also assure that the ppp_async module is loaded with the parameter
      flag_time=0. You can do this e.g. by adding a line like
 
@@ -190,20 +188,19 @@ GigaSet 307x Device Driver
      You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
      setting (ttyGxy is ttyGU0 or ttyGB0).
 
-2.6. M105 Undocumented USB Requests
-     ------------------------------
-
-     The Gigaset M105 USB data box understands a couple of useful, but
-     undocumented USB commands. These requests are not used in normal
-     operation (for wireless access to the base), but are needed for access
-     to the M105's own configuration mode (registration to the base, baudrate
-     and line format settings, device status queries) via the gigacontr
-     utility. Their use is controlled by the kernel configuration option
-     "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you
-     encounter error code -ENOTTY when trying to use some features of the
-     M105, try setting that option to "y" via 'make {x,menu}config' and
-     recompiling the driver.
-
+2.6. Unregistered Wireless Devices (M101/M105)
+     -----------------------------------------
+     The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
+     the M101 and M105 wireless devices to be used as ISDN devices for ISDN
+     connections through a Gigaset base. Therefore they assume that the device
+     is registered to a DECT base.
+
+     If the M101/M105 device is not registered to a base, initialization of
+     the device fails, and a corresponding error message is logged by the
+     driver. In that situation, a restricted set of functions is available
+     which includes, in particular, those necessary for registering the device
+     to a base or for switching it between Fixed Part and Portable Part
+     modes.
 
 3.   Troubleshooting
      ---------------
@@ -234,11 +231,12 @@ GigaSet 307x Device Driver
         Select Unimodem mode for all DECT data adapters. (see section 2.4.)
 
      Problem:
-        You want to configure your USB DECT data adapter (M105) but gigacontr
-        reports an error: "/dev/ttyGU0: Inappropriate ioctl for device".
+	Messages like this:
+	    usb_gigaset 3-2:1.0: Could not initialize the device.
+	appear in your syslog.
      Solution:
-        Recompile the usb_gigaset driver with the kernel configuration option
-        CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.)
+	Check whether your M10x wireless device is correctly registered to the
+	Gigaset base. (see section 2.6.)
 
 3.2. Telling the driver to provide more information
      ----------------------------------------------
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index 26a7c0a9319..849b5e56d06 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -35,48 +35,26 @@ new .config files to see the differences:
 
 (Yes, we need something better here.)
 
-
-======================================================================
-menuconfig
---------------------------------------------------
-
-SEARCHING for CONFIG symbols
-
-Searching in menuconfig:
-
-	The Search function searches for kernel configuration symbol
-	names, so you have to know something close to what you are
-	looking for.
-
-	Example:
-		/hotplug
-		This lists all config symbols that contain "hotplug",
-		e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG.
-
-	For search help, enter / followed TAB-TAB-TAB (to highlight
-	<Help>) and Enter.  This will tell you that you can also use
-	regular expressions (regexes) in the search string, so if you
-	are not interested in MEMORY_HOTPLUG, you could try
-
-		/^hotplug
-
-
 ______________________________________________________________________
-Color Themes for 'menuconfig'
+Environment variables for '*config'
 
-It is possible to select different color themes using the variable
-MENUCONFIG_COLOR.  To select a theme use:
+KCONFIG_CONFIG
+--------------------------------------------------
+This environment variable can be used to specify a default kernel config
+file name to override the default name of ".config".
 
-	make MENUCONFIG_COLOR=<theme> menuconfig
+KCONFIG_OVERWRITECONFIG
+--------------------------------------------------
+If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
+break symlinks when .config is a symlink to somewhere else.
 
-Available themes are:
-  mono       => selects colors suitable for monochrome displays
-  blackbg    => selects a color scheme with black background
-  classic    => theme with blue background. The classic look
-  bluetitle  => a LCD friendly version of classic. (default)
+KCONFIG_NOTIMESTAMP
+--------------------------------------------------
+If this environment variable exists and is non-null, the timestamp line
+in generated .config files is omitted.
 
 ______________________________________________________________________
-Environment variables in 'menuconfig'
+Environment variables for '{allyes/allmod/allno/rand}config'
 
 KCONFIG_ALLCONFIG
 --------------------------------------------------
@@ -95,8 +73,7 @@ values.
 This enables you to create "miniature" config (miniconfig) or custom
 config files containing just the config symbols that you are interested
 in.  Then the kernel config system generates the full .config file,
-including dependencies of your miniconfig file, based on the miniconfig
-file.
+including symbols of your miniconfig file.
 
 This 'KCONFIG_ALLCONFIG' file is a config file which contains
 (usually a subset of all) preset config symbols.  These variable
@@ -113,26 +90,14 @@ These examples will disable most options (allnoconfig) but enable or
 disable the options that are explicitly listed in the specified
 mini-config files.
 
+______________________________________________________________________
+Environment variables for 'silentoldconfig'
+
 KCONFIG_NOSILENTUPDATE
 --------------------------------------------------
 If this variable has a non-blank value, it prevents silent kernel
 config udpates (requires explicit updates).
 
-KCONFIG_CONFIG
---------------------------------------------------
-This environment variable can be used to specify a default kernel config
-file name to override the default name of ".config".
-
-KCONFIG_OVERWRITECONFIG
---------------------------------------------------
-If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
-break symlinks when .config is a symlink to somewhere else.
-
-KCONFIG_NOTIMESTAMP
---------------------------------------------------
-If this environment variable exists and is non-null, the timestamp line
-in generated .config files is omitted.
-
 KCONFIG_AUTOCONFIG
 --------------------------------------------------
 This environment variable can be set to specify the path & name of the
@@ -143,15 +108,54 @@ KCONFIG_AUTOHEADER
 This environment variable can be set to specify the path & name of the
 "autoconf.h" (header) file.  Its default value is "include/linux/autoconf.h".
 
+
+======================================================================
+menuconfig
+--------------------------------------------------
+
+SEARCHING for CONFIG symbols
+
+Searching in menuconfig:
+
+	The Search function searches for kernel configuration symbol
+	names, so you have to know something close to what you are
+	looking for.
+
+	Example:
+		/hotplug
+		This lists all config symbols that contain "hotplug",
+		e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG.
+
+	For search help, enter / followed TAB-TAB-TAB (to highlight
+	<Help>) and Enter.  This will tell you that you can also use
+	regular expressions (regexes) in the search string, so if you
+	are not interested in MEMORY_HOTPLUG, you could try
+
+		/^hotplug
+
 ______________________________________________________________________
-menuconfig User Interface Options
-----------------------------------------------------------------------
+User interface options for 'menuconfig'
+
+MENUCONFIG_COLOR
+--------------------------------------------------
+It is possible to select different color themes using the variable
+MENUCONFIG_COLOR.  To select a theme use:
+
+	make MENUCONFIG_COLOR=<theme> menuconfig
+
+Available themes are:
+  mono       => selects colors suitable for monochrome displays
+  blackbg    => selects a color scheme with black background
+  classic    => theme with blue background. The classic look
+  bluetitle  => a LCD friendly version of classic. (default)
+
 MENUCONFIG_MODE
 --------------------------------------------------
 This mode shows all sub-menus in one large tree.
 
 Example:
-	MENUCONFIG_MODE=single_menu make menuconfig
+	make MENUCONFIG_MODE=single_menu menuconfig
+
 
 ======================================================================
 xconfig
diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt
index b1096da953c..0767cf69c69 100644
--- a/Documentation/kbuild/modules.txt
+++ b/Documentation/kbuild/modules.txt
@@ -275,7 +275,7 @@ following files:
 
 		KERNELDIR := /lib/modules/`uname -r`/build
 		all::
-			$(MAKE) -C $KERNELDIR M=`pwd` $@
+			$(MAKE) -C $(KERNELDIR) M=`pwd` $@
 
 		# Module specific targets
 		genbin:
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 3f4bc840da8..cab61d84225 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -108,7 +108,7 @@ There are two possible methods of using Kdump.
 
 2) Or use the system kernel binary itself as dump-capture kernel and there is
    no need to build a separate dump-capture kernel. This is possible
-   only with the architecutres which support a relocatable kernel. As
+   only with the architectures which support a relocatable kernel. As
    of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
    kernel.
 
@@ -222,7 +222,7 @@ Dump-capture kernel config options (Arch Dependent, ia64)
 ----------------------------------------------------------
 
 - No specific options are required to create a dump-capture kernel
-  for ia64, other than those specified in the arch idependent section
+  for ia64, other than those specified in the arch independent section
   above. This means that it is possible to use the system kernel
   as a dump-capture kernel if desired.
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 0bf8a882ee9..5578248c18a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -491,6 +491,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			Also note the kernel might malfunction if you disable
 			some critical bits.
 
+	cmo_free_hint=	[PPC] Format: { yes | no }
+			Specify whether pages are marked as being inactive
+			when they are freed.  This is used in CMO environments
+			to determine OS memory pressure for page stealing by
+			a hypervisor.
+			Default: yes
+
 	code_bytes	[X86] How many bytes of object code to print
 			in an oops report.
 			Range: 0 - 8192
@@ -539,6 +546,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			console=brl,ttyS0
 		For now, only VisioBraille is supported.
 
+	consoleblank=	[KNL] The console blank (screen saver) timeout in
+			seconds. Defaults to 10*60 = 10mins. A value of 0
+			disables the blank timer.
+
 	coredump_filter=
 			[KNL] Change the default value for
 			/proc/<pid>/coredump_filter.
@@ -1073,7 +1084,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	kgdboc=		[HW] kgdb over consoles.
 			Requires a tty driver that supports console polling.
-			(only serial suported for now)
+			(only serial supported for now)
 			Format: <serial_device>[,baud]
 
 	kmac=		[MIPS] korina ethernet MAC address.
@@ -1402,7 +1413,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			('y', default) or cooked coordinates ('n')
 
 	mtrr_chunk_size=nn[KMG] [X86]
-			used for mtrr cleanup. It is largest continous chunk
+			used for mtrr cleanup. It is largest continuous chunk
 			that could hold holes aka. UC entries.
 
 	mtrr_gran_size=nn[KMG] [X86]
diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt
new file mode 100644
index 00000000000..363044609da
--- /dev/null
+++ b/Documentation/kmemcheck.txt
@@ -0,0 +1,773 @@
+GETTING STARTED WITH KMEMCHECK
+==============================
+
+Vegard Nossum <vegardno@ifi.uio.no>
+
+
+Contents
+========
+0. Introduction
+1. Downloading
+2. Configuring and compiling
+3. How to use
+3.1. Booting
+3.2. Run-time enable/disable
+3.3. Debugging
+3.4. Annotating false positives
+4. Reporting errors
+5. Technical description
+
+
+0. Introduction
+===============
+
+kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
+is a dynamic checker that detects and warns about some uses of uninitialized
+memory.
+
+Userspace programmers might be familiar with Valgrind's memcheck. The main
+difference between memcheck and kmemcheck is that memcheck works for userspace
+programs only, and kmemcheck works for the kernel only. The implementations
+are of course vastly different. Because of this, kmemcheck is not as accurate
+as memcheck, but it turns out to be good enough in practice to discover real
+programmer errors that the compiler is not able to find through static
+analysis.
+
+Enabling kmemcheck on a kernel will probably slow it down to the extent that
+the machine will not be usable for normal workloads such as e.g. an
+interactive desktop. kmemcheck will also cause the kernel to use about twice
+as much memory as normal. For this reason, kmemcheck is strictly a debugging
+feature.
+
+
+1. Downloading
+==============
+
+kmemcheck can only be downloaded using git. If you want to write patches
+against the current code, you should use the kmemcheck development branch of
+the tip tree. It is also possible to use the linux-next tree, which also
+includes the latest version of kmemcheck.
+
+Assuming that you've already cloned the linux-2.6.git repository, all you
+have to do is add the -tip tree as a remote, like this:
+
+	$ git remote add tip git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git
+
+To actually download the tree, fetch the remote:
+
+	$ git fetch tip
+
+And to check out a new local branch with the kmemcheck code:
+
+	$ git checkout -b kmemcheck tip/kmemcheck
+
+General instructions for the -tip tree can be found here:
+http://people.redhat.com/mingo/tip.git/readme.txt
+
+
+2. Configuring and compiling
+============================
+
+kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
+configuration variables must have specific settings in order for the kmemcheck
+menu to even appear in "menuconfig". These are:
+
+  o CONFIG_CC_OPTIMIZE_FOR_SIZE=n
+
+	This option is located under "General setup" / "Optimize for size".
+
+	Without this, gcc will use certain optimizations that usually lead to
+	false positive warnings from kmemcheck. An example of this is a 16-bit
+	field in a struct, where gcc may load 32 bits, then discard the upper
+	16 bits. kmemcheck sees only the 32-bit load, and may trigger a
+	warning for the upper 16 bits (if they're uninitialized).
+
+  o CONFIG_SLAB=y or CONFIG_SLUB=y
+
+	This option is located under "General setup" / "Choose SLAB
+	allocator".
+
+  o CONFIG_FUNCTION_TRACER=n
+
+	This option is located under "Kernel hacking" / "Tracers" / "Kernel
+	Function Tracer"
+
+	When function tracing is compiled in, gcc emits a call to another
+	function at the beginning of every function. This means that when the
+	page fault handler is called, the ftrace framework will be called
+	before kmemcheck has had a chance to handle the fault. If ftrace then
+	modifies memory that was tracked by kmemcheck, the result is an
+	endless recursive page fault.
+
+  o CONFIG_DEBUG_PAGEALLOC=n
+
+	This option is located under "Kernel hacking" / "Debug page memory
+	allocations".
+
+In addition, I highly recommend turning on CONFIG_DEBUG_INFO=y. This is also
+located under "Kernel hacking". With this, you will be able to get line number
+information from the kmemcheck warnings, which is extremely valuable in
+debugging a problem. This option is not mandatory, however, because it slows
+down the compilation process and produces a much bigger kernel image.
+
+Now the kmemcheck menu should be visible (under "Kernel hacking" / "kmemcheck:
+trap use of uninitialized memory"). Here follows a description of the
+kmemcheck configuration variables:
+
+  o CONFIG_KMEMCHECK
+
+	This must be enabled in order to use kmemcheck at all...
+
+  o CONFIG_KMEMCHECK_[DISABLED | ENABLED | ONESHOT]_BY_DEFAULT
+
+	This option controls the status of kmemcheck at boot-time. "Enabled"
+	will enable kmemcheck right from the start, "disabled" will boot the
+	kernel as normal (but with the kmemcheck code compiled in, so it can
+	be enabled at run-time after the kernel has booted), and "one-shot" is
+	a special mode which will turn kmemcheck off automatically after
+	detecting the first use of uninitialized memory.
+
+	If you are using kmemcheck to actively debug a problem, then you
+	probably want to choose "enabled" here.
+
+	The one-shot mode is mostly useful in automated test setups because it
+	can prevent floods of warnings and increase the chances of the machine
+	surviving in case something is really wrong. In other cases, the one-
+	shot mode could actually be counter-productive because it would turn
+	itself off at the very first error -- in the case of a false positive
+	too -- and this would come in the way of debugging the specific
+	problem you were interested in.
+
+	If you would like to use your kernel as normal, but with a chance to
+	enable kmemcheck in case of some problem, it might be a good idea to
+	choose "disabled" here. When kmemcheck is disabled, most of the run-
+	time overhead is not incurred, and the kernel will be almost as fast
+	as normal.
+
+  o CONFIG_KMEMCHECK_QUEUE_SIZE
+
+	Select the maximum number of error reports to store in an internal
+	(fixed-size) buffer. Since errors can occur virtually anywhere and in
+	any context, we need a temporary storage area which is guaranteed not
+	to generate any other page faults when accessed. The queue will be
+	emptied as soon as a tasklet may be scheduled. If the queue is full,
+	new error reports will be lost.
+
+	The default value of 64 is probably fine. If some code produces more
+	than 64 errors within an irqs-off section, then the code is likely to
+	produce many, many more, too, and these additional reports seldom give
+	any more information (the first report is usually the most valuable
+	anyway).
+
+	This number might have to be adjusted if you are not using serial
+	console or similar to capture the kernel log. If you are using the
+	"dmesg" command to save the log, then getting a lot of kmemcheck
+	warnings might overflow the kernel log itself, and the earlier reports
+	will get lost in that way instead. Try setting this to 10 or so on
+	such a setup.
+
+  o CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT
+
+	Select the number of shadow bytes to save along with each entry of the
+	error-report queue. These bytes indicate what parts of an allocation
+	are initialized, uninitialized, etc. and will be displayed when an
+	error is detected to help the debugging of a particular problem.
+
+	The number entered here is actually the logarithm of the number of
+	bytes that will be saved. So if you pick for example 5 here, kmemcheck
+	will save 2^5 = 32 bytes.
+
+	The default value should be fine for debugging most problems. It also
+	fits nicely within 80 columns.
+
+  o CONFIG_KMEMCHECK_PARTIAL_OK
+
+	This option (when enabled) works around certain GCC optimizations that
+	produce 32-bit reads from 16-bit variables where the upper 16 bits are
+	thrown away afterwards.
+
+	The default value (enabled) is recommended. This may of course hide
+	some real errors, but disabling it would probably produce a lot of
+	false positives.
+
+  o CONFIG_KMEMCHECK_BITOPS_OK
+
+	This option silences warnings that would be generated for bit-field
+	accesses where not all the bits are initialized at the same time. This
+	may also hide some real bugs.
+
+	This option is probably obsolete, or it should be replaced with
+	the kmemcheck-/bitfield-annotations for the code in question. The
+	default value is therefore fine.
+
+Now compile the kernel as usual.
+
+
+3. How to use
+=============
+
+3.1. Booting
+============
+
+First some information about the command-line options. There is only one
+option specific to kmemcheck, and this is called "kmemcheck". It can be used
+to override the default mode as chosen by the CONFIG_KMEMCHECK_*_BY_DEFAULT
+option. Its possible settings are:
+
+  o kmemcheck=0 (disabled)
+  o kmemcheck=1 (enabled)
+  o kmemcheck=2 (one-shot mode)
+
+If SLUB debugging has been enabled in the kernel, it may take precedence over
+kmemcheck in such a way that the slab caches which are under SLUB debugging
+will not be tracked by kmemcheck. In order to ensure that this doesn't happen
+(even though it shouldn't by default), use SLUB's boot option "slub_debug",
+like this: slub_debug=-
+
+In fact, this option may also be used for fine-grained control over SLUB vs.
+kmemcheck. For example, if the command line includes "kmemcheck=1
+slub_debug=,dentry", then SLUB debugging will be used only for the "dentry"
+slab cache, and with kmemcheck tracking all the other caches. This is advanced
+usage, however, and is not generally recommended.
+
+
+3.2. Run-time enable/disable
+============================
+
+When the kernel has booted, it is possible to enable or disable kmemcheck at
+run-time. WARNING: This feature is still experimental and may cause false
+positive warnings to appear. Therefore, try not to use this. If you find that
+it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
+will be happy to take bug reports.
+
+Use the file /proc/sys/kernel/kmemcheck for this purpose, e.g.:
+
+	$ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
+
+The numbers are the same as for the kmemcheck= command-line option.
+
+
+3.3. Debugging
+==============
+
+A typical report will look something like this:
+
+WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
+80000000000000000000000000000000000000000088ffff0000000000000000
+ i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+         ^
+
+Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
+RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
+RSP: 0018:ffff88003cdf7d98  EFLAGS: 00210002
+RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
+RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
+RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
+R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
+R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
+FS:  0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
+CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
+CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
+DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
+DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
+ [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
+ [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
+ [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
+ [<ffffffff8100c7b5>] int_signal+0x12/0x17
+ [<ffffffffffffffff>] 0xffffffffffffffff
+
+The single most valuable information in this report is the RIP (or EIP on 32-
+bit) value. This will help us pinpoint exactly which instruction that caused
+the warning.
+
+If your kernel was compiled with CONFIG_DEBUG_INFO=y, then all we have to do
+is give this address to the addr2line program, like this:
+
+	$ addr2line -e vmlinux -i ffffffff8104ede8
+	arch/x86/include/asm/string_64.h:12
+	include/asm-generic/siginfo.h:287
+	kernel/signal.c:380
+	kernel/signal.c:410
+
+The "-e vmlinux" tells addr2line which file to look in. IMPORTANT: This must
+be the vmlinux of the kernel that produced the warning in the first place! If
+not, the line number information will almost certainly be wrong.
+
+The "-i" tells addr2line to also print the line numbers of inlined functions.
+In this case, the flag was very important, because otherwise, it would only
+have printed the first line, which is just a call to memcpy(), which could be
+called from a thousand places in the kernel, and is therefore not very useful.
+These inlined functions would not show up in the stack trace above, simply
+because the kernel doesn't load the extra debugging information. This
+technique can of course be used with ordinary kernel oopses as well.
+
+In this case, it's the caller of memcpy() that is interesting, and it can be
+found in include/asm-generic/siginfo.h, line 287:
+
+281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+282 {
+283         if (from->si_code < 0)
+284                 memcpy(to, from, sizeof(*to));
+285         else
+286                 /* _sigchld is currently the largest know union member */
+287                 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+288 }
+
+Since this was a read (kmemcheck usually warns about reads only, though it can
+warn about writes to unallocated or freed memory as well), it was probably the
+"from" argument which contained some uninitialized bytes. Following the chain
+of calls, we move upwards to see where "from" was allocated or initialized,
+kernel/signal.c, line 380:
+
+359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+360 {
+...
+367         list_for_each_entry(q, &list->list, list) {
+368                 if (q->info.si_signo == sig) {
+369                         if (first)
+370                                 goto still_pending;
+371                         first = q;
+...
+377         if (first) {
+378 still_pending:
+379                 list_del_init(&first->list);
+380                 copy_siginfo(info, &first->info);
+381                 __sigqueue_free(first);
+...
+392         }
+393 }
+
+Here, it is &first->info that is being passed on to copy_siginfo(). The
+variable "first" was found on a list -- passed in as the second argument to
+collect_signal(). We  continue our journey through the stack, to figure out
+where the item on "list" was allocated or initialized. We move to line 410:
+
+395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
+396                         siginfo_t *info)
+397 {
+...
+410                 collect_signal(sig, pending, info);
+...
+414 }
+
+Now we need to follow the "pending" pointer, since that is being passed on to
+collect_signal() as "list". At this point, we've run out of lines from the
+"addr2line" output. Not to worry, we just paste the next addresses from the
+kmemcheck stack dump, i.e.:
+
+ [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
+ [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
+ [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
+ [<ffffffff8100c7b5>] int_signal+0x12/0x17
+
+	$ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
+		ffffffff8100b87d ffffffff8100c7b5
+	kernel/signal.c:446
+	kernel/signal.c:1806
+	arch/x86/kernel/signal.c:805
+	arch/x86/kernel/signal.c:871
+	arch/x86/kernel/entry_64.S:694
+
+Remember that since these addresses were found on the stack and not as the
+RIP value, they actually point to the _next_ instruction (they are return
+addresses). This becomes obvious when we look at the code for line 446:
+
+422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
+423 {
+...
+431                 signr = __dequeue_signal(&tsk->signal->shared_pending,
+432                                          mask, info);
+433                 /*
+434                  * itimer signal ?
+435                  *
+436                  * itimers are process shared and we restart periodic
+437                  * itimers in the signal delivery path to prevent DoS
+438                  * attacks in the high resolution timer case. This is
+439                  * compliant with the old way of self restarting
+440                  * itimers, as the SIGALRM is a legacy signal and only
+441                  * queued once. Changing the restart behaviour to
+442                  * restart the timer in the signal dequeue path is
+443                  * reducing the timer noise on heavy loaded !highres
+444                  * systems too.
+445                  */
+446                 if (unlikely(signr == SIGALRM)) {
+...
+489 }
+
+So instead of looking at 446, we should be looking at 431, which is the line
+that executes just before 446. Here we see that what we are looking for is
+&tsk->signal->shared_pending.
+
+Our next task is now to figure out which function that puts items on this
+"shared_pending" list. A crude, but efficient tool, is git grep:
+
+	$ git grep -n 'shared_pending' kernel/
+	...
+	kernel/signal.c:828:    pending = group ? &t->signal->shared_pending : &t->pending;
+	kernel/signal.c:1339:   pending = group ? &t->signal->shared_pending : &t->pending;
+	...
+
+There were more results, but none of them were related to list operations,
+and these were the only assignments. We inspect the line numbers more closely
+and find that this is indeed where items are being added to the list:
+
+816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
+817                         int group)
+818 {
+...
+828         pending = group ? &t->signal->shared_pending : &t->pending;
+...
+851         q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
+852                                              (is_si_special(info) ||
+853                                               info->si_code >= 0)));
+854         if (q) {
+855                 list_add_tail(&q->list, &pending->list);
+...
+890 }
+
+and:
+
+1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
+1310 {
+....
+1339         pending = group ? &t->signal->shared_pending : &t->pending;
+1340         list_add_tail(&q->list, &pending->list);
+....
+1347 }
+
+In the first case, the list element we are looking for, "q", is being returned
+from the function __sigqueue_alloc(), which looks like an allocation function.
+Let's take a look at it:
+
+187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
+188                                          int override_rlimit)
+189 {
+190         struct sigqueue *q = NULL;
+191         struct user_struct *user;
+192 
+193         /*
+194          * We won't get problems with the target's UID changing under us
+195          * because changing it requires RCU be used, and if t != current, the
+196          * caller must be holding the RCU readlock (by way of a spinlock) and
+197          * we use RCU protection here
+198          */
+199         user = get_uid(__task_cred(t)->user);
+200         atomic_inc(&user->sigpending);
+201         if (override_rlimit ||
+202             atomic_read(&user->sigpending) <=
+203                         t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
+204                 q = kmem_cache_alloc(sigqueue_cachep, flags);
+205         if (unlikely(q == NULL)) {
+206                 atomic_dec(&user->sigpending);
+207                 free_uid(user);
+208         } else {
+209                 INIT_LIST_HEAD(&q->list);
+210                 q->flags = 0;
+211                 q->user = user;
+212         }
+213 
+214         return q;
+215 }
+
+We see that this function initializes q->list, q->flags, and q->user. It seems
+that now is the time to look at the definition of "struct sigqueue", e.g.:
+
+14 struct sigqueue {
+15         struct list_head list;
+16         int flags;
+17         siginfo_t info;
+18         struct user_struct *user;
+19 };
+
+And, you might remember, it was a memcpy() on &first->info that caused the
+warning, so this makes perfect sense. It also seems reasonable to assume that
+it is the caller of __sigqueue_alloc() that has the responsibility of filling
+out (initializing) this member.
+
+But just which fields of the struct were uninitialized? Let's look at
+kmemcheck's report again:
+
+WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
+80000000000000000000000000000000000000000088ffff0000000000000000
+ i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+         ^
+
+These first two lines are the memory dump of the memory object itself, and the
+shadow bytemap, respectively. The memory object itself is in this case
+&first->info. Just beware that the start of this dump is NOT the start of the
+object itself! The position of the caret (^) corresponds with the address of
+the read (ffff88003e4a2024).
+
+The shadow bytemap dump legend is as follows:
+
+  i - initialized
+  u - uninitialized
+  a - unallocated (memory has been allocated by the slab layer, but has not
+      yet been handed off to anybody)
+  f - freed (memory has been allocated by the slab layer, but has been freed
+      by the previous owner)
+
+In order to figure out where (relative to the start of the object) the
+uninitialized memory was located, we have to look at the disassembly. For
+that, we'll need the RIP address again:
+
+RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
+
+	$ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
+	ffffffff8104edc8:       mov    %r8,0x8(%r8)
+	ffffffff8104edcc:       test   %r10d,%r10d
+	ffffffff8104edcf:       js     ffffffff8104ee88 <__dequeue_signal+0x168>
+	ffffffff8104edd5:       mov    %rax,%rdx
+	ffffffff8104edd8:       mov    $0xc,%ecx
+	ffffffff8104eddd:       mov    %r13,%rdi
+	ffffffff8104ede0:       mov    $0x30,%eax
+	ffffffff8104ede5:       mov    %rdx,%rsi
+	ffffffff8104ede8:       rep movsl %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edea:       test   $0x2,%al
+	ffffffff8104edec:       je     ffffffff8104edf0 <__dequeue_signal+0xd0>
+	ffffffff8104edee:       movsw  %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edf0:       test   $0x1,%al
+	ffffffff8104edf2:       je     ffffffff8104edf5 <__dequeue_signal+0xd5>
+	ffffffff8104edf4:       movsb  %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edf5:       mov    %r8,%rdi
+	ffffffff8104edf8:       callq  ffffffff8104de60 <__sigqueue_free>
+
+As expected, it's the "rep movsl" instruction from the memcpy() that causes
+the warning. We know about REP MOVSL that it uses the register RCX to count
+the number of remaining iterations. By taking a look at the register dump
+again (from the kmemcheck report), we can figure out how many bytes were left
+to copy:
+
+RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
+
+By looking at the disassembly, we also see that %ecx is being loaded with the
+value $0xc just before (ffffffff8104edd8), so we are very lucky. Keep in mind
+that this is the number of iterations, not bytes. And since this is a "long"
+operation, we need to multiply by 4 to get the number of bytes. So this means
+that the uninitialized value was encountered at 4 * (0xc - 0x9) = 12 bytes
+from the start of the object.
+
+We can now try to figure out which field of the "struct siginfo" that was not
+initialized. This is the beginning of the struct:
+
+40 typedef struct siginfo {
+41         int si_signo;
+42         int si_errno;
+43         int si_code;
+44                 
+45         union {
+..
+92         } _sifields;
+93 } siginfo_t;
+
+On 64-bit, the int is 4 bytes long, so it must the the union member that has
+not been initialized. We can verify this using gdb:
+
+	$ gdb vmlinux
+	...
+	(gdb) p &((struct siginfo *) 0)->_sifields
+	$1 = (union {...} *) 0x10
+
+Actually, it seems that the union member is located at offset 0x10 -- which
+means that gcc has inserted 4 bytes of padding between the members si_code
+and _sifields. We can now get a fuller picture of the memory dump:
+
+         _----------------------------=> si_code
+        /        _--------------------=> (padding)
+       |        /        _------------=> _sifields(._kill._pid)
+       |       |        /        _----=> _sifields(._kill._uid)
+       |       |       |        / 
+-------|-------|-------|-------|
+80000000000000000000000000000000000000000088ffff0000000000000000
+ i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+
+This allows us to realize another important fact: si_code contains the value
+0x80. Remember that x86 is little endian, so the first 4 bytes "80000000" are
+really the number 0x00000080. With a bit of research, we find that this is
+actually the constant SI_KERNEL defined in include/asm-generic/siginfo.h:
+
+144 #define SI_KERNEL       0x80            /* sent by the kernel from somewhere     */
+
+This macro is used in exactly one place in the x86 kernel: In send_signal()
+in kernel/signal.c:
+
+816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
+817                         int group)
+818 {
+...
+828         pending = group ? &t->signal->shared_pending : &t->pending;
+...
+851         q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
+852                                              (is_si_special(info) ||
+853                                               info->si_code >= 0)));
+854         if (q) {
+855                 list_add_tail(&q->list, &pending->list);
+856                 switch ((unsigned long) info) {
+...
+865                 case (unsigned long) SEND_SIG_PRIV:
+866                         q->info.si_signo = sig;
+867                         q->info.si_errno = 0;
+868                         q->info.si_code = SI_KERNEL;
+869                         q->info.si_pid = 0;
+870                         q->info.si_uid = 0;
+871                         break;
+...
+890 }
+
+Not only does this match with the .si_code member, it also matches the place
+we found earlier when looking for where siginfo_t objects are enqueued on the
+"shared_pending" list.
+
+So to sum up: It seems that it is the padding introduced by the compiler
+between two struct fields that is uninitialized, and this gets reported when
+we do a memcpy() on the struct. This means that we have identified a false
+positive warning.
+
+Normally, kmemcheck will not report uninitialized accesses in memcpy() calls
+when both the source and destination addresses are tracked. (Instead, we copy
+the shadow bytemap as well). In this case, the destination address clearly
+was not tracked. We can dig a little deeper into the stack trace from above:
+
+	arch/x86/kernel/signal.c:805
+	arch/x86/kernel/signal.c:871
+	arch/x86/kernel/entry_64.S:694
+
+And we clearly see that the destination siginfo object is located on the
+stack:
+
+782 static void do_signal(struct pt_regs *regs)
+783 {
+784         struct k_sigaction ka;
+785         siginfo_t info;
+...
+804         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+...
+854 }
+
+And this &info is what eventually gets passed to copy_siginfo() as the
+destination argument.
+
+Now, even though we didn't find an actual error here, the example is still a
+good one, because it shows how one would go about to find out what the report
+was all about.
+
+
+3.4. Annotating false positives
+===============================
+
+There are a few different ways to make annotations in the source code that
+will keep kmemcheck from checking and reporting certain allocations. Here
+they are:
+
+  o __GFP_NOTRACK_FALSE_POSITIVE
+
+	This flag can be passed to kmalloc() or kmem_cache_alloc() (therefore
+	also to other functions that end up calling one of these) to indicate
+	that the allocation should not be tracked because it would lead to
+	a false positive report. This is a "big hammer" way of silencing
+	kmemcheck; after all, even if the false positive pertains to 
+	particular field in a struct, for example, we will now lose the
+	ability to find (real) errors in other parts of the same struct.
+
+	Example:
+
+	    /* No warnings will ever trigger on accessing any part of x */
+	    x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
+
+  o kmemcheck_bitfield_begin(name)/kmemcheck_bitfield_end(name) and
+	kmemcheck_annotate_bitfield(ptr, name)
+
+	The first two of these three macros can be used inside struct
+	definitions to signal, respectively, the beginning and end of a
+	bitfield. Additionally, this will assign the bitfield a name, which
+	is given as an argument to the macros.
+
+	Having used these markers, one can later use
+	kmemcheck_annotate_bitfield() at the point of allocation, to indicate
+	which parts of the allocation is part of a bitfield.
+
+	Example:
+
+	    struct foo {
+		int x;
+
+		kmemcheck_bitfield_begin(flags);
+		int flag_a:1;
+		int flag_b:1;
+		kmemcheck_bitfield_end(flags);
+
+		int y;
+	    };
+
+	    struct foo *x = kmalloc(sizeof *x);
+
+	    /* No warnings will trigger on accessing the bitfield of x */
+	    kmemcheck_annotate_bitfield(x, flags);
+
+	Note that kmemcheck_annotate_bitfield() can be used even before the
+	return value of kmalloc() is checked -- in other words, passing NULL
+	as the first argument is legal (and will do nothing).
+
+
+4. Reporting errors
+===================
+
+As we have seen, kmemcheck will produce false positive reports. Therefore, it
+is not very wise to blindly post kmemcheck warnings to mailing lists and
+maintainers. Instead, I encourage maintainers and developers to find errors
+in their own code. If you get a warning, you can try to work around it, try
+to figure out if it's a real error or not, or simply ignore it. Most
+developers know their own code and will quickly and efficiently determine the
+root cause of a kmemcheck report. This is therefore also the most efficient
+way to work with kmemcheck.
+
+That said, we (the kmemcheck maintainers) will always be on the lookout for
+false positives that we can annotate and silence. So whatever you find,
+please drop us a note privately! Kernel configs and steps to reproduce (if
+available) are of course a great help too.
+
+Happy hacking!
+
+
+5. Technical description
+========================
+
+kmemcheck works by marking memory pages non-present. This means that whenever
+somebody attempts to access the page, a page fault is generated. The page
+fault handler notices that the page was in fact only hidden, and so it calls
+on the kmemcheck code to make further investigations.
+
+When the investigations are completed, kmemcheck "shows" the page by marking
+it present (as it would be under normal circumstances). This way, the
+interrupted code can continue as usual.
+
+But after the instruction has been executed, we should hide the page again, so
+that we can catch the next access too! Now kmemcheck makes use of a debugging
+feature of the processor, namely single-stepping. When the processor has
+finished the one instruction that generated the memory access, a debug
+exception is raised. From here, we simply hide the page again and continue
+execution, this time with the single-stepping feature turned off.
+
+kmemcheck requires some assistance from the memory allocator in order to work.
+The memory allocator needs to
+
+  1. Tell kmemcheck about newly allocated pages and pages that are about to
+     be freed. This allows kmemcheck to set up and tear down the shadow memory
+     for the pages in question. The shadow memory stores the status of each
+     byte in the allocation proper, e.g. whether it is initialized or
+     uninitialized.
+
+  2. Tell kmemcheck which parts of memory should be marked uninitialized.
+     There are actually a few more states, such as "not yet allocated" and
+     "recently freed".
+
+If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
+memory that can take page faults because of kmemcheck.
+
+If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
+request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags.
+This does not prevent the page faults from occurring, however, but marks the
+object in question as being initialized so that no warnings will ever be
+produced for this object.
+
+Currently, the SLAB and SLUB allocators are supported by kmemcheck.
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index b2e374586bd..c79ab996dad 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -132,7 +132,7 @@ kobject_name():
     const char *kobject_name(const struct kobject * kobj);
 
 There is a helper function to both initialize and add the kobject to the
-kernel at the same time, called supprisingly enough kobject_init_and_add():
+kernel at the same time, called surprisingly enough kobject_init_and_add():
 
     int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype,
                              struct kobject *parent, const char *fmt, ...);
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 1e7a769a10f..053037a1fe6 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -507,9 +507,9 @@ http://www.linuxsymposium.org/2006/linuxsymposium_procv2.pdf (pages 101-115)
 Appendix A: The kprobes debugfs interface
 
 With recent kernels (> 2.6.20) the list of registered kprobes is visible
-under the /debug/kprobes/ directory (assuming debugfs is mounted at /debug).
+under the /sys/kernel/debug/kprobes/ directory (assuming debugfs is mounted at //sys/kernel/debug).
 
-/debug/kprobes/list: Lists all registered probes on the system
+/sys/kernel/debug/kprobes/list: Lists all registered probes on the system
 
 c015d71a  k  vfs_read+0x0
 c011a316  j  do_fork+0x0
@@ -525,7 +525,7 @@ virtual addresses that correspond to modules that've been unloaded),
 such probes are marked with [GONE]. If the probe is temporarily disabled,
 such probes are marked with [DISABLED].
 
-/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
+/sys/kernel/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
 
 Provides a knob to globally and forcibly turn registered kprobes ON or OFF.
 By default, all kprobes are enabled. By echoing "0" to this file, all
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 5ee2a02b3b4..0768fcc3ba3 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -40,7 +40,7 @@ NOTE: The Acer Aspire One is not supported hardware. It cannot work with
 acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been
 blacklisted until that happens.
 
-Please see the website for the current list of known working hardare:
+Please see the website for the current list of known working hardware:
 
 http://code.google.com/p/aceracpi/wiki/SupportedHardware
 
diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.txt
index 8b2bc1572d9..23ce7d350d1 100644
--- a/Documentation/laptops/sony-laptop.txt
+++ b/Documentation/laptops/sony-laptop.txt
@@ -22,7 +22,7 @@ If your laptop model supports it, you will find sysfs files in the
 /sys/class/backlight/sony/
 directory. You will be able to query and set the current screen
 brightness:
-	brightness		get/set screen brightness (an iteger
+	brightness		get/set screen brightness (an integer
 				between 0 and 7)
 	actual_brightness	reading from this file will query the HW
 				to get real brightness value
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index e7e9a69069e..78e354b42f6 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -506,7 +506,7 @@ generate input device EV_KEY events.
 In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
 events for switches:
 
-SW_RFKILL_ALL	T60 and later hardare rfkill rocker switch
+SW_RFKILL_ALL	T60 and later hardware rfkill rocker switch
 SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
 
 Non hot-key ACPI HKEY event map:
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index 23045b8b50f..300da4bdfdb 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -34,7 +34,7 @@ out of order wrt other memory writes by the owner CPU.
 
 It can be done by slightly modifying the standard atomic operations : only
 their UP variant must be kept. It typically means removing LOCK prefix (on
-i386 and x86_64) and any SMP sychronization barrier. If the architecture does
+i386 and x86_64) and any SMP synchronization barrier. If the architecture does
 not have a different behavior between SMP and UP, including asm-generic/local.h
 in your architecture's local.h is sufficient.
 
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 4c2ecf537a4..bbc8a6a3692 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -73,13 +73,13 @@ this phase is triggered automatically. ACPI can notify this event. If not,
 (see Section 4.).
 
 Logical Memory Hotplug phase is to change memory state into
-avaiable/unavailable for users. Amount of memory from user's view is
+available/unavailable for users. Amount of memory from user's view is
 changed by this phase. The kernel makes all memory in it as free pages
 when a memory range is available.
 
 In this document, this phase is described as online/offline.
 
-Logical Memory Hotplug phase is triggred by write of sysfs file by system
+Logical Memory Hotplug phase is triggered by write of sysfs file by system
 administrator. For the hot-add case, it must be executed after Physical Hotplug
 phase by hand.
 (However, if you writes udev's hotplug scripts for memory hotplug, these
@@ -334,7 +334,7 @@ MEMORY_CANCEL_ONLINE
   Generated if MEMORY_GOING_ONLINE fails.
 
 MEMORY_ONLINE
-  Generated when memory has succesfully brought online. The callback may
+  Generated when memory has successfully brought online. The callback may
   allocate pages from the new memory.
 
 MEMORY_GOING_OFFLINE
@@ -359,7 +359,7 @@ The third argument is passed by pointer of struct memory_notify.
 struct memory_notify {
        unsigned long start_pfn;
        unsigned long nr_pages;
-       int status_cahnge_nid;
+       int status_change_nid;
 }
 
 start_pfn is start_pfn of online/offline memory.
diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt
index 1fef1f06dfd..d3507bad428 100644
--- a/Documentation/mn10300/ABI.txt
+++ b/Documentation/mn10300/ABI.txt
@@ -26,7 +26,7 @@ registers and the stack. If the first argument is a 64-bit value, it will be
 passed in D0:D1. If the first argument is not a 64-bit value, but the second
 is, the second will be passed entirely on the stack and D1 will be unused.
 
-Arguments smaller than 32-bits are not coelesced within a register or a stack
+Arguments smaller than 32-bits are not coalesced within a register or a stack
 word. For example, two byte-sized arguments will always be passed in separate
 registers or word-sized stack slots.
 
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt
index bdf93b7f0f2..274821b35a7 100644
--- a/Documentation/mtd/nand_ecc.txt
+++ b/Documentation/mtd/nand_ecc.txt
@@ -50,7 +50,7 @@ byte 255:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp3 rp5 ... rp15
            cp5  cp5  cp5  cp5  cp4  cp4  cp4  cp4
 
 This figure represents a sector of 256 bytes.
-cp is my abbreviaton for column parity, rp for row parity.
+cp is my abbreviation for column parity, rp for row parity.
 
 Let's start to explain column parity.
 cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
@@ -560,7 +560,7 @@ Measuring this code again showed big gain. When executing the original
 linux code 1 million times, this took about 1 second on my system.
 (using time to measure the performance). After this iteration I was back
 to 0.075 sec. Actually I had to decide to start measuring over 10
-million interations in order not to loose too much accuracy. This one
+million iterations in order not to lose too much accuracy. This one
 definitely seemed to be the jackpot!
 
 There is a little bit more room for improvement though. There are three
@@ -571,8 +571,8 @@ loop; This eliminates 3 statements per loop. Of course after the loop we
 need to correct by adding:
     rp4 ^= rp4_6;
     rp6 ^= rp4_6
-Furthermore there are 4 sequential assingments to rp8. This can be
-encoded slightly more efficient by saving tmppar before those 4 lines
+Furthermore there are 4 sequential assignments to rp8. This can be
+encoded slightly more efficiently by saving tmppar before those 4 lines
 and later do rp8 = rp8 ^ tmppar ^ notrp8;
 (where notrp8 is the value of rp8 before those 4 lines).
 Again a use of the commutative property of xor.
@@ -622,7 +622,7 @@ Not a big change, but every penny counts :-)
 Analysis 7
 ==========
 
-Acutally this made things worse. Not very much, but I don't want to move
+Actually this made things worse. Not very much, but I don't want to move
 into the wrong direction. Maybe something to investigate later. Could
 have to do with caching again.
 
@@ -642,7 +642,7 @@ Analysis 8
 This makes things worse. Let's stick with attempt 6 and continue from there.
 Although it seems that the code within the loop cannot be optimised
 further there is still room to optimize the generation of the ecc codes.
-We can simply calcualate the total parity. If this is 0 then rp4 = rp5
+We can simply calculate the total parity. If this is 0 then rp4 = rp5
 etc. If the parity is 1, then rp4 = !rp5;
 But if rp4 = rp5 we do not need rp5 etc. We can just write the even bits
 in the result byte and then do something like
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 08762750f12..d5181ce9ff6 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -221,7 +221,7 @@ ad_select
 
 		- Any slave's 802.3ad association state changes
 
-		- The bond's adminstrative state changes to up
+		- The bond's administrative state changes to up
 
 	count or 2
 
@@ -369,7 +369,7 @@ fail_over_mac
 		When this policy is used in conjuction with the mii
 		monitor, devices which assert link up prior to being
 		able to actually transmit and receive are particularly
-		susecptible to loss of the gratuitous ARP, and an
+		susceptible to loss of the gratuitous ARP, and an
 		appropriate updelay setting may be required.
 
 	follow or 2
@@ -1794,7 +1794,7 @@ target to query.
 generally referred to as "trunk failover."  This is a feature of the
 switch that causes the link state of a particular switch port to be set
 down (or up) when the state of another switch port goes down (or up).
-It's purpose is to propogate link failures from logically "exterior" ports
+Its purpose is to propagate link failures from logically "exterior" ports
 to the logically "interior" ports that bonding is able to monitor via
 miimon.  Availability and configuration for trunk failover varies by
 switch, but this can be a viable alternative to the ARP monitor when using
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 2035bc4932f..cd79735013f 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -36,10 +36,15 @@ This file contains
     6.2 local loopback of sent frames
     6.3 CAN controller hardware filters
     6.4 The virtual CAN driver (vcan)
-    6.5 currently supported CAN hardware
-    6.6 todo
+    6.5 The CAN network device driver interface
+      6.5.1 Netlink interface to set/get devices properties
+      6.5.2 Setting the CAN bit-timing
+      6.5.3 Starting and stopping the CAN network device
+    6.6 supported CAN hardware
 
-  7 Credits
+  7 Socket CAN resources
+
+  8 Credits
 
 ============================================================================
 
@@ -234,6 +239,8 @@ solution for a couple of reasons:
   the user application using the common CAN filter mechanisms. Inside
   this filter definition the (interested) type of errors may be
   selected. The reception of error frames is disabled by default.
+  The format of the CAN error frame is briefly decribed in the Linux
+  header file "include/linux/can/error.h".
 
 4. How to use Socket CAN
 ------------------------
@@ -327,7 +334,7 @@ solution for a couple of reasons:
             return 1;
     }
 
-    /* paraniod check ... */
+    /* paranoid check ... */
     if (nbytes < sizeof(struct can_frame)) {
             fprintf(stderr, "read: incomplete CAN frame\n");
             return 1;
@@ -605,61 +612,213 @@ solution for a couple of reasons:
   removal of vcan network devices can be managed with the ip(8) tool:
 
   - Create a virtual CAN network interface:
-       ip link add type vcan
+       $ ip link add type vcan
 
   - Create a virtual CAN network interface with a specific name 'vcan42':
-       ip link add dev vcan42 type vcan
+       $ ip link add dev vcan42 type vcan
 
   - Remove a (virtual CAN) network interface 'vcan42':
-       ip link del vcan42
-
-  The tool 'vcan' from the SocketCAN SVN repository on BerliOS is obsolete.
-
-  Virtual CAN network device creation in older Kernels:
-  In Linux Kernel versions < 2.6.24 the vcan driver creates 4 vcan
-  netdevices at module load time by default. This value can be changed
-  with the module parameter 'numdev'. E.g. 'modprobe vcan numdev=8'
-
-  6.5 currently supported CAN hardware
+       $ ip link del vcan42
+
+  6.5 The CAN network device driver interface
+
+  The CAN network device driver interface provides a generic interface
+  to setup, configure and monitor CAN network devices. The user can then
+  configure the CAN device, like setting the bit-timing parameters, via
+  the netlink interface using the program "ip" from the "IPROUTE2"
+  utility suite. The following chapter describes briefly how to use it.
+  Furthermore, the interface uses a common data structure and exports a
+  set of common functions, which all real CAN network device drivers
+  should use. Please have a look to the SJA1000 or MSCAN driver to
+  understand how to use them. The name of the module is can-dev.ko.
+
+  6.5.1 Netlink interface to set/get devices properties
+
+  The CAN device must be configured via netlink interface. The supported
+  netlink message types are defined and briefly described in
+  "include/linux/can/netlink.h". CAN link support for the program "ip"
+  of the IPROUTE2 utility suite is avaiable and it can be used as shown
+  below:
+
+  - Setting CAN device properties:
+
+    $ ip link set can0 type can help
+    Usage: ip link set DEVICE type can
+    	[ bitrate BITRATE [ sample-point SAMPLE-POINT] ] |
+    	[ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
+     	  phase-seg2 PHASE-SEG2 [ sjw SJW ] ]
+
+    	[ loopback { on | off } ]
+    	[ listen-only { on | off } ]
+    	[ triple-sampling { on | off } ]
+
+    	[ restart-ms TIME-MS ]
+    	[ restart ]
+
+    	Where: BITRATE       := { 1..1000000 }
+    	       SAMPLE-POINT  := { 0.000..0.999 }
+    	       TQ            := { NUMBER }
+    	       PROP-SEG      := { 1..8 }
+    	       PHASE-SEG1    := { 1..8 }
+    	       PHASE-SEG2    := { 1..8 }
+    	       SJW           := { 1..4 }
+    	       RESTART-MS    := { 0 | NUMBER }
+
+  - Display CAN device details and statistics:
+
+    $ ip -details -statistics link show can0
+    2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UP qlen 10
+      link/can
+      can <TRIPLE-SAMPLING> state ERROR-ACTIVE restart-ms 100
+      bitrate 125000 sample_point 0.875
+      tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
+      sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+      clock 8000000
+      re-started bus-errors arbit-lost error-warn error-pass bus-off
+      41         17457      0          41         42         41
+      RX: bytes  packets  errors  dropped overrun mcast
+      140859     17608    17457   0       0       0
+      TX: bytes  packets  errors  dropped carrier collsns
+      861        112      0       41      0       0
+
+  More info to the above output:
+
+    "<TRIPLE-SAMPLING>"
+	Shows the list of selected CAN controller modes: LOOPBACK,
+	LISTEN-ONLY, or TRIPLE-SAMPLING.
+
+    "state ERROR-ACTIVE"
+	The current state of the CAN controller: "ERROR-ACTIVE",
+	"ERROR-WARNING", "ERROR-PASSIVE", "BUS-OFF" or "STOPPED"
+
+    "restart-ms 100"
+	Automatic restart delay time. If set to a non-zero value, a
+	restart of the CAN controller will be triggered automatically
+	in case of a bus-off condition after the specified delay time
+	in milliseconds. By default it's off.
+
+    "bitrate 125000 sample_point 0.875"
+	Shows the real bit-rate in bits/sec and the sample-point in the
+	range 0.000..0.999. If the calculation of bit-timing parameters
+	is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the
+	bit-timing can be defined by setting the "bitrate" argument.
+	Optionally the "sample-point" can be specified. By default it's
+	0.000 assuming CIA-recommended sample-points.
+
+    "tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1"
+	Shows the time quanta in ns, propagation segment, phase buffer
+	segment 1 and 2 and the synchronisation jump width in units of
+	tq. They allow to define the CAN bit-timing in a hardware
+	independent format as proposed by the Bosch CAN 2.0 spec (see
+	chapter 8 of http://www.semiconductors.bosch.de/pdf/can2spec.pdf).
+
+    "sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+     clock 8000000"
+	Shows the bit-timing constants of the CAN controller, here the
+	"sja1000". The minimum and maximum values of the time segment 1
+	and 2, the synchronisation jump width in units of tq, the
+	bitrate pre-scaler and the CAN system clock frequency in Hz.
+	These constants could be used for user-defined (non-standard)
+	bit-timing calculation algorithms in user-space.
+
+    "re-started bus-errors arbit-lost error-warn error-pass bus-off"
+	Shows the number of restarts, bus and arbitration lost errors,
+	and the state changes to the error-warning, error-passive and
+	bus-off state. RX overrun errors are listed in the "overrun"
+	field of the standard network statistics.
+
+  6.5.2 Setting the CAN bit-timing
+
+  The CAN bit-timing parameters can always be defined in a hardware
+  independent format as proposed in the Bosch CAN 2.0 specification
+  specifying the arguments "tq", "prop_seg", "phase_seg1", "phase_seg2"
+  and "sjw":
+
+    $ ip link set canX type can tq 125 prop-seg 6 \
+				phase-seg1 7 phase-seg2 2 sjw 1
+
+  If the kernel option CONFIG_CAN_CALC_BITTIMING is enabled, CIA
+  recommended CAN bit-timing parameters will be calculated if the bit-
+  rate is specified with the argument "bitrate":
+
+    $ ip link set canX type can bitrate 125000
+
+  Note that this works fine for the most common CAN controllers with
+  standard bit-rates but may *fail* for exotic bit-rates or CAN system
+  clock frequencies. Disabling CONFIG_CAN_CALC_BITTIMING saves some
+  space and allows user-space tools to solely determine and set the
+  bit-timing parameters. The CAN controller specific bit-timing
+  constants can be used for that purpose. They are listed by the
+  following command:
+
+    $ ip -details link show can0
+    ...
+      sja1000: clock 8000000 tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
+
+  6.5.3 Starting and stopping the CAN network device
+
+  A CAN network device is started or stopped as usual with the command
+  "ifconfig canX up/down" or "ip link set canX up/down". Be aware that
+  you *must* define proper bit-timing parameters for real CAN devices
+  before you can start it to avoid error-prone default settings:
+
+    $ ip link set canX up type can bitrate 125000
+
+  A device may enter the "bus-off" state if too much errors occurred on
+  the CAN bus. Then no more messages are received or sent. An automatic
+  bus-off recovery can be enabled by setting the "restart-ms" to a
+  non-zero value, e.g.:
+
+    $ ip link set canX type can restart-ms 100
+
+  Alternatively, the application may realize the "bus-off" condition
+  by monitoring CAN error frames and do a restart when appropriate with
+  the command:
+
+    $ ip link set canX type can restart
+
+  Note that a restart will also create a CAN error frame (see also
+  chapter 3.4).
 
-  On the project website http://developer.berlios.de/projects/socketcan
-  there are different drivers available:
+  6.6 Supported CAN hardware
 
-    vcan:    Virtual CAN interface driver (if no real hardware is available)
-    sja1000: Philips SJA1000 CAN controller (recommended)
-    i82527:  Intel i82527 CAN controller
-    mscan:   Motorola/Freescale CAN controller (e.g. inside SOC MPC5200)
-    ccan:    CCAN controller core (e.g. inside SOC h7202)
-    slcan:   For a bunch of CAN adaptors that are attached via a
-             serial line ASCII protocol (for serial / USB adaptors)
+  Please check the "Kconfig" file in "drivers/net/can" to get an actual
+  list of the support CAN hardware. On the Socket CAN project website
+  (see chapter 7) there might be further drivers available, also for
+  older kernel versions.
 
-  Additionally the different CAN adaptors (ISA/PCI/PCMCIA/USB/Parport)
-  from PEAK Systemtechnik support the CAN netdevice driver model
-  since Linux driver v6.0: http://www.peak-system.com/linux/index.htm
+7. Socket CAN resources
+-----------------------
 
-  Please check the Mailing Lists on the berlios OSS project website.
+  You can find further resources for Socket CAN like user space tools,
+  support for old kernel versions, more drivers, mailing lists, etc.
+  at the BerliOS OSS project website for Socket CAN:
 
-  6.6 todo
+    http://developer.berlios.de/projects/socketcan
 
-  The configuration interface for CAN network drivers is still an open
-  issue that has not been finalized in the socketcan project. Also the
-  idea of having a library module (candev.ko) that holds functions
-  that are needed by all CAN netdevices is not ready to ship.
-  Your contribution is welcome.
+  If you have questions, bug fixes, etc., don't hesitate to post them to
+  the Socketcan-Users mailing list. But please search the archives first.
 
-7. Credits
+8. Credits
 ----------
 
-  Oliver Hartkopp (PF_CAN core, filters, drivers, bcm)
+  Oliver Hartkopp (PF_CAN core, filters, drivers, bcm, SJA1000 driver)
   Urs Thuermann (PF_CAN core, kernel integration, socket interfaces, raw, vcan)
   Jan Kizka (RT-SocketCAN core, Socket-API reconciliation)
-  Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews)
+  Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews,
+                       CAN device driver interface, MSCAN driver)
   Robert Schwebel (design reviews, PTXdist integration)
   Marc Kleine-Budde (design reviews, Kernel 2.6 cleanups, drivers)
   Benedikt Spranger (reviews)
   Thomas Gleixner (LKML reviews, coding style, posting hints)
-  Andrey Volkov (kernel subtree structure, ioctls, mscan driver)
+  Andrey Volkov (kernel subtree structure, ioctls, MSCAN driver)
   Matthias Brukner (first SJA1000 CAN netdevice implementation Q2/2003)
   Klaus Hitschler (PEAK driver integration)
   Uwe Koppe (CAN netdevices with PF_PACKET approach)
   Michael Schulze (driver layer loopback requirement, RT CAN drivers review)
+  Pavel Pisa (Bit-timing calculation)
+  Sascha Hauer (SJA1000 platform driver)
+  Sebastian Haas (SJA1000 EMS PCI driver)
+  Markus Plessing (SJA1000 EMS PCI driver)
+  Per Dalen (SJA1000 Kvaser PCI driver)
+  Sam Ravnborg (reviews, coding style, kbuild help)
diff --git a/Documentation/networking/dm9000.txt b/Documentation/networking/dm9000.txt
index 65df3dea556..5552e2e575c 100644
--- a/Documentation/networking/dm9000.txt
+++ b/Documentation/networking/dm9000.txt
@@ -129,7 +129,7 @@ PHY Link state polling
 ----------------------
 
 The driver keeps track of the link state and informs the network core
-about link (carrier) availablilty. This is managed by several methods
+about link (carrier) availability. This is managed by several methods
 depending on the version of the chip and on which PHY is being used.
 
 For the internal PHY, the original (and currently default) method is
diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
new file mode 100644
index 00000000000..a0280ad2edc
--- /dev/null
+++ b/Documentation/networking/ieee802154.txt
@@ -0,0 +1,76 @@
+
+		Linux IEEE 802.15.4 implementation
+
+
+Introduction
+============
+
+The Linux-ZigBee project goal is to provide complete implementation
+of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack
+of protocols for organizing Low-Rate Wireless Personal Area Networks.
+
+Currently only IEEE 802.15.4 layer is implemented. We have choosen
+to use plain Berkeley socket API, the generic Linux networking stack
+to transfer IEEE 802.15.4 messages and a special protocol over genetlink
+for configuration/management
+
+
+Socket API
+==========
+
+int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0);
+.....
+
+The address family, socket addresses etc. are defined in the
+include/net/ieee802154/af_ieee802154.h header or in the special header
+in our userspace package (see either linux-zigbee sourceforge download page
+or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee).
+
+One can use SOCK_RAW for passing raw data towards device xmit function. YMMV.
+
+
+MLME - MAC Level Management
+============================
+
+Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
+See the include/net/ieee802154/nl802154.h header. Our userspace tools package
+(see above) provides CLI configuration utility for radio interfaces and simple
+coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
+
+
+Kernel side
+=============
+
+Like with WiFi, there are several types of devices implementing IEEE 802.15.4.
+1) 'HardMAC'. The MAC layer is implemented in the device itself, the device
+   exports MLME and data API.
+2) 'SoftMAC' or just radio. These types of devices are just radio transceivers
+   possibly with some kinds of acceleration like automatic CRC computation and
+   comparation, automagic ACK handling, address matching, etc.
+
+Those types of devices require different approach to be hooked into Linux kernel.
+
+
+HardMAC
+=======
+
+See the header include/net/ieee802154/netdevice.h. You have to implement Linux
+net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family
+code via plain sk_buffs. The control block of sk_buffs will contain additional
+info as described in the struct ieee802154_mac_cb.
+
+To hook the MLME interface you have to populate the ml_priv field of your
+net_device with a pointer to struct ieee802154_mlme_ops instance. All fields are
+required.
+
+We provide an example of simple HardMAC driver at drivers/ieee802154/fakehard.c
+
+
+SoftMAC
+=======
+
+We are going to provide intermediate layer impelementing IEEE 802.15.4 MAC
+in software. This is currently WIP.
+
+See header include/net/ieee802154/mac802154.h and several drivers in
+drivers/ieee802154/
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index b121c5db707..8be76235fe6 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -168,7 +168,16 @@ tcp_dsack - BOOLEAN
 	Allows TCP to send "duplicate" SACKs.
 
 tcp_ecn - BOOLEAN
-	Enable Explicit Congestion Notification in TCP.
+	Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
+	used when both ends of the TCP flow support it. It is useful to
+	avoid losses due to congestion (when the bottleneck router supports
+	ECN).
+	Possible values are:
+		0 disable ECN
+		1 ECN enabled
+		2 Only server-side ECN enabled. If the other end does
+		  not support ECN, behavior is like with ECN disabled.
+	Default: 2
 
 tcp_fack - BOOLEAN
 	Enable FACK congestion avoidance and fast retransmission.
@@ -1048,6 +1057,13 @@ disable_ipv6 - BOOLEAN
 	address.
 	Default: FALSE (enable IPv6 operation)
 
+	When this value is changed from 1 to 0 (IPv6 is being enabled),
+	it will dynamically create a link-local address on the given
+	interface and start Duplicate Address Detection, if necessary.
+
+	When this value is changed from 0 to 1 (IPv6 is being disabled),
+	it will dynamically delete all address on the given interface.
+
 accept_dad - INTEGER
 	Whether to accept DAD (Duplicate Address Detection).
 	0: Disable DAD
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
index 268e5c103dd..9fd7e21296c 100644
--- a/Documentation/networking/ipv6.txt
+++ b/Documentation/networking/ipv6.txt
@@ -33,3 +33,40 @@ disable
 
 		A reboot is required to enable IPv6.
 
+autoconf
+
+	Specifies whether to enable IPv6 address autoconfiguration
+	on all interfaces.  This might be used when one does not wish
+	for addresses to be automatically generated from prefixes
+	received in Router Advertisements.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 address autoconfiguration is disabled on all interfaces.
+
+		Only the IPv6 loopback address (::1) and link-local addresses
+		will be added to interfaces.
+
+	1
+		IPv6 address autoconfiguration is enabled on all interfaces.
+
+		This is the default value.
+
+disable_ipv6
+
+	Specifies whether to disable IPv6 on all interfaces.
+	This might be used when no IPv6 addresses are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled on all interfaces.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled on all interfaces.
+
+		No IPv6 addresses will be added to interfaces.
+
diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt
index 2451f551c50..63214b280e0 100644
--- a/Documentation/networking/l2tp.txt
+++ b/Documentation/networking/l2tp.txt
@@ -158,7 +158,7 @@ Sample Userspace Code
         }
         return 0;
 
-Miscellanous
+Miscellaneous
 ============
 
 The PPPoL2TP driver was developed as part of the OpenL2TP project by
diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt
index 84906ef3ed6..b30e81ad530 100644
--- a/Documentation/networking/mac80211-injection.txt
+++ b/Documentation/networking/mac80211-injection.txt
@@ -12,38 +12,22 @@ following format:
 The radiotap format is discussed in
 ./Documentation/networking/radiotap-headers.txt.
 
-Despite 13 radiotap argument types are currently defined, most only make sense
+Despite many radiotap parameters being currently defined, most only make sense
 to appear on received packets.  The following information is parsed from the
 radiotap headers and used to control injection:
 
- * IEEE80211_RADIOTAP_RATE
-
-   rate in 500kbps units, automatic if invalid or not present
-
-
- * IEEE80211_RADIOTAP_ANTENNA
-
-   antenna to use, automatic if not present
-
-
- * IEEE80211_RADIOTAP_DBM_TX_POWER
-
-   transmit power in dBm, automatic if not present
-
-
  * IEEE80211_RADIOTAP_FLAGS
 
    IEEE80211_RADIOTAP_F_FCS: FCS will be removed and recalculated
    IEEE80211_RADIOTAP_F_WEP: frame will be encrypted if key available
    IEEE80211_RADIOTAP_F_FRAG: frame will be fragmented if longer than the
-			      current fragmentation threshold. Note that
-			      this flag is only reliable when software
-			      fragmentation is enabled)
+			      current fragmentation threshold.
+
 
 The injection code can also skip all other currently defined radiotap fields
 facilitating replay of captured radiotap headers directly.
 
-Here is an example valid radiotap header defining these three parameters
+Here is an example valid radiotap header defining some parameters
 
 	0x00, 0x00, // <-- radiotap version
 	0x0b, 0x00, // <- radiotap header length
@@ -72,8 +56,8 @@ interface), along the following lines:
 ...
 	r = pcap_inject(ppcap, u8aSendBuffer, nLength);
 
-You can also find sources for a complete inject test applet here:
+You can also find a link to a complete inject application here:
 
-http://penumbra.warmcat.com/_twk/tiki-index.php?page=packetspammer
+http://wireless.kernel.org/en/users/Documentation/packetspammer
 
 Andy Green <andy@warmcat.com>
diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
index a2ab6a0b116..87b3d15f523 100644
--- a/Documentation/networking/netdevices.txt
+++ b/Documentation/networking/netdevices.txt
@@ -74,7 +74,7 @@ dev->hard_start_xmit:
 	for this and return NETDEV_TX_LOCKED when the spin lock fails.
 	The locking there should also properly protect against 
 	set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated.
-	Dont use it for new drivers.
+	Don't use it for new drivers.
 
 	Context: Process with BHs disabled or BH (timer),
 	         will be called with interrupts disabled by netconsole.
diff --git a/Documentation/networking/operstates.txt b/Documentation/networking/operstates.txt
index c9074f9b78b..1a77a3cfae5 100644
--- a/Documentation/networking/operstates.txt
+++ b/Documentation/networking/operstates.txt
@@ -38,9 +38,6 @@ ifinfomsg::if_flags & IFF_LOWER_UP:
 ifinfomsg::if_flags & IFF_DORMANT:
  Driver has signaled netif_dormant_on()
 
-These interface flags can also be queried without netlink using the
-SIOCGIFFLAGS ioctl.
-
 TLV IFLA_OPERSTATE
 
 contains RFC2863 state of the interface in numeric representation:
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 07c53d59603..a22fd85e379 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -4,16 +4,18 @@
 
 This file documents the CONFIG_PACKET_MMAP option available with the PACKET
 socket interface on 2.4 and 2.6 kernels. This type of sockets is used for 
-capture network traffic with utilities like tcpdump or any other that uses 
-the libpcap library. 
-
-You can find the latest version of this document at
+capture network traffic with utilities like tcpdump or any other that needs
+raw access to network interface.
 
+You can find the latest version of this document at:
     http://pusa.uv.es/~ulisses/packet_mmap/
 
-Please send me your comments to
+Howto can be found at:
+    http://wiki.gnu-log.net (packet_mmap)
 
+Please send your comments to
     Ulisses Alonso Camaró <uaca@i.hate.spam.alumni.uv.es>
+    Johann Baudy <johann.baudy@gnu-log.net>
 
 -------------------------------------------------------------------------------
 + Why use PACKET_MMAP
@@ -25,19 +27,24 @@ to capture each packet, it requires two if you want to get packet's
 timestamp (like libpcap always does).
 
 In the other hand PACKET_MMAP is very efficient. PACKET_MMAP provides a size 
-configurable circular buffer mapped in user space. This way reading packets just 
-needs to wait for them, most of the time there is no need to issue a single 
-system call. By using a shared buffer between the kernel and the user 
-also has the benefit of minimizing packet copies.
-
-It's fine to use PACKET_MMAP to improve the performance of the capture process, 
-but it isn't everything. At least, if you are capturing at high speeds (this 
-is relative to the cpu speed), you should check if the device driver of your 
-network interface card supports some sort of interrupt load mitigation or 
-(even better) if it supports NAPI, also make sure it is enabled.
+configurable circular buffer mapped in user space that can be used to either
+send or receive packets. This way reading packets just needs to wait for them,
+most of the time there is no need to issue a single system call. Concerning
+transmission, multiple packets can be sent through one system call to get the
+highest bandwidth.
+By using a shared buffer between the kernel and the user also has the benefit
+of minimizing packet copies.
+
+It's fine to use PACKET_MMAP to improve the performance of the capture and
+transmission process, but it isn't everything. At least, if you are capturing
+at high speeds (this is relative to the cpu speed), you should check if the
+device driver of your network interface card supports some sort of interrupt
+load mitigation or (even better) if it supports NAPI, also make sure it is
+enabled. For transmission, check the MTU (Maximum Transmission Unit) used and
+supported by devices of your network.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP
++ How to use CONFIG_PACKET_MMAP to improve capture process
 --------------------------------------------------------------------------------
 
 From the user standpoint, you should use the higher level libpcap library, which
@@ -57,7 +64,7 @@ the low level details or want to improve libpcap by including PACKET_MMAP
 support.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP directly
++ How to use CONFIG_PACKET_MMAP directly to improve capture process
 --------------------------------------------------------------------------------
 
 From the system calls stand point, the use of PACKET_MMAP involves
@@ -66,6 +73,7 @@ the following process:
 
 [setup]     socket() -------> creation of the capture socket
             setsockopt() ---> allocation of the circular buffer (ring)
+                              option: PACKET_RX_RING
             mmap() ---------> mapping of the allocated buffer to the
                               user process
 
@@ -97,13 +105,75 @@ also the mapping of the circular buffer in the user process and
 the use of this buffer.
 
 --------------------------------------------------------------------------------
++ How to use CONFIG_PACKET_MMAP directly to improve transmission process
+--------------------------------------------------------------------------------
+Transmission process is similar to capture as shown below.
+
+[setup]          socket() -------> creation of the transmission socket
+                 setsockopt() ---> allocation of the circular buffer (ring)
+                                   option: PACKET_TX_RING
+                 bind() ---------> bind transmission socket with a network interface
+                 mmap() ---------> mapping of the allocated buffer to the
+                                   user process
+
+[transmission]   poll() ---------> wait for free packets (optional)
+                 send() ---------> send all packets that are set as ready in
+                                   the ring
+                                   The flag MSG_DONTWAIT can be used to return
+                                   before end of transfer.
+
+[shutdown]  close() --------> destruction of the transmission socket and
+                              deallocation of all associated resources.
+
+Binding the socket to your network interface is mandatory (with zero copy) to
+know the header size of frames used in the circular buffer.
+
+As capture, each frame contains two parts:
+
+ --------------------
+| struct tpacket_hdr | Header. It contains the status of
+|                    | of this frame
+|--------------------|
+| data buffer        |
+.                    .  Data that will be sent over the network interface.
+.                    .
+ --------------------
+
+ bind() associates the socket to your network interface thanks to
+ sll_ifindex parameter of struct sockaddr_ll.
+
+ Initialization example:
+
+ struct sockaddr_ll my_addr;
+ struct ifreq s_ifr;
+ ...
+
+ strncpy (s_ifr.ifr_name, "eth0", sizeof(s_ifr.ifr_name));
+
+ /* get interface index of eth0 */
+ ioctl(this->socket, SIOCGIFINDEX, &s_ifr);
+
+ /* fill sockaddr_ll struct to prepare binding */
+ my_addr.sll_family = AF_PACKET;
+ my_addr.sll_protocol = ETH_P_ALL;
+ my_addr.sll_ifindex =  s_ifr.ifr_ifindex;
+
+ /* bind socket to eth0 */
+ bind(this->socket, (struct sockaddr *)&my_addr, sizeof(struct sockaddr_ll));
+
+ A complete tutorial is available at: http://wiki.gnu-log.net/
+
+--------------------------------------------------------------------------------
 + PACKET_MMAP settings
 --------------------------------------------------------------------------------
 
 
 To setup PACKET_MMAP from user level code is done with a call like
 
+ - Capture process
      setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req))
+ - Transmission process
+     setsockopt(fd, SOL_PACKET, PACKET_TX_RING, (void *) &req, sizeof(req))
 
 The most significant argument in the previous call is the req parameter, 
 this parameter must to have the following structure:
@@ -117,11 +187,11 @@ this parameter must to have the following structure:
     };
 
 This structure is defined in /usr/include/linux/if_packet.h and establishes a 
-circular buffer (ring) of unswappable memory mapped in the capture process. 
+circular buffer (ring) of unswappable memory.
 Being mapped in the capture process allows reading the captured frames and 
 related meta-information like timestamps without requiring a system call.
 
-Captured frames are grouped in blocks. Each block is a physically contiguous 
+Frames are grouped in blocks. Each block is a physically contiguous
 region of memory and holds tp_block_size/tp_frame_size frames. The total number 
 of blocks is tp_block_nr. Note that tp_frame_nr is a redundant parameter because
 
@@ -336,6 +406,7 @@ struct tpacket_hdr). If this field is 0 means that the frame is ready
 to be used for the kernel, If not, there is a frame the user can read 
 and the following flags apply:
 
++++ Capture process:
      from include/linux/if_packet.h
 
      #define TP_STATUS_COPY          2 
@@ -391,6 +462,37 @@ packets are in the ring:
 It doesn't incur in a race condition to first check the status value and 
 then poll for frames.
 
+
+++ Transmission process
+Those defines are also used for transmission:
+
+     #define TP_STATUS_AVAILABLE        0 // Frame is available
+     #define TP_STATUS_SEND_REQUEST     1 // Frame will be sent on next send()
+     #define TP_STATUS_SENDING          2 // Frame is currently in transmission
+     #define TP_STATUS_WRONG_FORMAT     4 // Frame format is not correct
+
+First, the kernel initializes all frames to TP_STATUS_AVAILABLE. To send a
+packet, the user fills a data buffer of an available frame, sets tp_len to
+current data buffer size and sets its status field to TP_STATUS_SEND_REQUEST.
+This can be done on multiple frames. Once the user is ready to transmit, it
+calls send(). Then all buffers with status equal to TP_STATUS_SEND_REQUEST are
+forwarded to the network device. The kernel updates each status of sent
+frames with TP_STATUS_SENDING until the end of transfer.
+At the end of each transfer, buffer status returns to TP_STATUS_AVAILABLE.
+
+    header->tp_len = in_i_size;
+    header->tp_status = TP_STATUS_SEND_REQUEST;
+    retval = send(this->socket, NULL, 0, 0);
+
+The user can also use poll() to check if a buffer is available:
+(status == TP_STATUS_SENDING)
+
+    struct pollfd pfd;
+    pfd.fd = fd;
+    pfd.revents = 0;
+    pfd.events = POLLOUT;
+    retval = poll(&pfd, 1, timeout);
+
 --------------------------------------------------------------------------------
 + THANKS
 --------------------------------------------------------------------------------
diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt
index 6a07e45d4a9..6e8ce09f9c7 100644
--- a/Documentation/networking/phonet.txt
+++ b/Documentation/networking/phonet.txt
@@ -36,7 +36,7 @@ Phonet packets have a common header as follows:
 On Linux, the link-layer header includes the pn_media byte (see below).
 The next 7 bytes are part of the network-layer header.
 
-The device ID is split: the 6 higher-order bits consitute the device
+The device ID is split: the 6 higher-order bits constitute the device
 address, while the 2 lower-order bits are used for multiplexing, as are
 the 8-bit object identifiers. As such, Phonet can be considered as a
 network layer with 6 bits of address space and 10 bits for transport
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index dcf31648414..eaa1a25946c 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -89,7 +89,7 @@ added to this document when its support is enabled.
 Device drivers who provide their own built regulatory domain
 do not need a callback as the channels registered by them are
 the only ones that will be allowed and therefore *additional*
-cannels cannot be enabled.
+channels cannot be enabled.
 
 Example code - drivers hinting an alpha2:
 ------------------------------------------
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 82b7a43aadb..5f83fd24ea8 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -178,5 +178,5 @@ Consumers can uregister interest by calling :-
 int regulator_unregister_notifier(struct regulator *regulator,
 				struct notifier_block *nb);
 
-Regulators use the kernel notifier framework to send event to thier interested
+Regulators use the kernel notifier framework to send event to their interested
 consumers.
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index bdcb332bd7f..0cded696ca0 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -119,7 +119,7 @@ Some terms used in this document:-
                    battery power, USB power)
 
                    Regulator Domains: is the new current limit within the
-                   regulator operating parameters for input/ouput voltage.
+                   regulator operating parameters for input/output voltage.
 
                    If the regulator request passes all the constraint tests
                    then the new regulator value is applied.
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index 2ebdc6091ce..514b94fc931 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -63,7 +63,7 @@ hardware during resume operations where a value can be set that will
 survive a reboot.
 
 Consequence is that after a resume (even if it is successful) your system
-clock will have a value corresponding to the magic mumber instead of the
+clock will have a value corresponding to the magic number instead of the
 correct date/time! It is therefore advisable to use a program like ntp-date
 or rdate to reset the correct date/time from an external time source when
 using this trace option.
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 7b99636564c..b967cd9137d 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -109,7 +109,7 @@ unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
 still frozen when the device is being closed).
 
 Currently it is assumed that the userland utilities reading/writing the
-snapshot image from/to the kernel will use a swap parition, called the resume
+snapshot image from/to the kernel will use a swap partition, called the resume
 partition, or a swap file as storage space (if a swap file is used, the resume
 partition is the partition that holds this file).  However, this is not really
 required, as they can use, for example, a special (blank) suspend partition or
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index d16b7a1c379..8d999d862d0 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1356,7 +1356,7 @@ platforms are moved over to use the flattened-device-tree model.
     - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
 			  for, used if phy-address is absent. bit 0x00000001 is
 			  MDIO address 0.
-			  For Axon it can be absent, thouugh my current driver
+			  For Axon it can be absent, though my current driver
 			  doesn't handle phy-address yet so for now, keep
 			  0x00ffffff in it.
     - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
@@ -1438,7 +1438,7 @@ platforms are moved over to use the flattened-device-tree model.
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellanious
+   of standard device types (network, serial, etc.) and miscellaneous
    devices (gpio, LCD, spi, etc).  Also, since these devices are
    implemented within the fpga fabric every instance of the device can be
    synthesised with different options that change the behaviour.
diff --git a/Documentation/powerpc/dts-bindings/can/sja1000.txt b/Documentation/powerpc/dts-bindings/can/sja1000.txt
new file mode 100644
index 00000000000..d6d209ded93
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/can/sja1000.txt
@@ -0,0 +1,53 @@
+Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+Required properties:
+
+- compatible : should be "nxp,sja1000".
+
+- reg : should specify the chip select, address offset and size required
+	to map the registers of the SJA1000. The size is usually 0x80.
+
+- interrupts: property with a value describing the interrupt source
+	(number and sensitivity) required for the SJA1000.
+
+Optional properties:
+
+- nxp,external-clock-frequency : Frequency of the external oscillator
+	clock in Hz. Note that the internal clock frequency used by the
+	SJA1000 is half of that value. If not specified, a default value
+	of 16000000 (16 MHz) is used.
+
+- nxp,tx-output-mode : operation mode of the TX output control logic:
+	<0x0> : bi-phase output mode
+	<0x1> : normal output mode (default)
+	<0x2> : test output mode
+	<0x3> : clock output mode
+
+- nxp,tx-output-config : TX output pin configuration:
+	<0x01> : TX0 invert
+	<0x02> : TX0 pull-down (default)
+	<0x04> : TX0 pull-up
+	<0x06> : TX0 push-pull
+	<0x08> : TX1 invert
+	<0x10> : TX1 pull-down
+	<0x20> : TX1 pull-up
+	<0x30> : TX1 push-pull
+
+- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
+	If not specified or if the specified value is 0, the CLKOUT pin
+	will be disabled.
+
+- nxp,no-comparator-bypass : Allows to disable the CAN input comperator.
+
+For futher information, please have a look to the SJA1000 data sheet.
+
+Examples:
+
+can@3,100 {
+	compatible = "nxp,sja1000";
+	reg = <3 0x100 0x80>;
+	interrupts = <2 0>;
+	interrupt-parent = <&mpic>;
+	nxp,external-clock-frequency = <16000000>;
+};
+
diff --git a/Documentation/powerpc/dts-bindings/ecm.txt b/Documentation/powerpc/dts-bindings/ecm.txt
new file mode 100644
index 00000000000..f514f29c67d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/ecm.txt
@@ -0,0 +1,64 @@
+=====================================================================
+E500 LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured.  For ECM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,ecm-law"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+  - fsl,num-laws
+      Usage: required
+      Value type: <u32>
+      Definition: The value specifies the number of local access
+          windows for this device.
+
+=====================================================================
+
+E500 Coherency Module Node
+
+The E500 LAW node represents the region of CCSR space where ECM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where
+      CHIP is the processor (mpc8572, mpc8544, etc.)
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop-encoded-array>
+
+   - interrupt-parent
+      Usage: required
+      Value type: <phandle>
+
+=====================================================================
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 6c974d28eeb..e8b5bc24d0a 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -38,7 +38,7 @@ Required properities:
 - reg : Should contain the address and the length of the GPIO bank
   register.
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
index 088fc471e03..160c752484b 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
@@ -19,7 +19,7 @@ Example:
 	reg = <119c0 30>;
      }
 
-* Properties common to mulitple CPM/QE devices
+* Properties common to multiple CPM/QE devices
 
 - fsl,cpm-command : This value is ORed with the opcode and command flag
                     to specify the device on which a CPM command operates.
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
index 1815dfede1b..349f79fd707 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -11,7 +11,7 @@ Required properties:
   "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
   "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example of three SOC GPIO banks defined as gpio-controller nodes:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
index 78790d58dc2..6e37be1eeb2 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
@@ -17,6 +17,9 @@ Required properties:
 - model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
 - reg : offset and length of the device registers.
 - bus-frequency : the clock frequency for QUICC Engine.
+- fsl,qe-num-riscs: define how many RISC engines the QE has.
+- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
+  threads.
 
 Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
index 60084655776..5093ddf900d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -5,8 +5,7 @@ for MMC, SD, and SDIO types of memory cards.
 
 Required properties:
   - compatible : should be
-    "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
-    "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+    "fsl,<chip>-esdhc", "fsl,esdhc"
   - reg : should contain eSDHC registers location and length.
   - interrupts : should contain eSDHC interrupt.
   - interrupt-parent : interrupt source phandle.
@@ -15,7 +14,7 @@ Required properties:
 Example:
 
 sdhci@2e000 {
-	compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+	compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
 	reg = <0x2e000 0x1000>;
 	interrupts = <42 0x8>;
 	interrupt-parent = <&ipic>;
diff --git a/Documentation/powerpc/dts-bindings/fsl/mcm.txt b/Documentation/powerpc/dts-bindings/fsl/mcm.txt
new file mode 100644
index 00000000000..4ceda9b3b41
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mcm.txt
@@ -0,0 +1,64 @@
+=====================================================================
+MPX LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured.  For MCM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,mcm-law"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+  - fsl,num-laws
+      Usage: required
+      Value type: <u32>
+      Definition: The value specifies the number of local access
+          windows for this device.
+
+=====================================================================
+
+MPX Coherency Module Node
+
+The MPX LAW node represents the region of CCSR space where MCM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where
+      CHIP is the processor (mpc8641, mpc8610, etc.)
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop-encoded-array>
+
+   - interrupt-parent
+      Usage: required
+      Value type: <phandle>
+
+=====================================================================
diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
index b26b91992c5..bcc30bac683 100644
--- a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
@@ -1,6 +1,6 @@
 * Freescale MSI interrupt controller
 
-Reguired properities:
+Required properties:
 - compatible : compatible list, contains 2 entries,
   first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
   etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
index 02f6f43ee1b..07256b7ffca 100644
--- a/Documentation/powerpc/dts-bindings/fsl/pmc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
@@ -15,8 +15,8 @@ Properties:
   compatible; all statements below that apply to "fsl,mpc8548-pmc" also
   apply to "fsl,mpc8641d-pmc".
 
-  Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
-  bit assigments are indicated via the sleep specifier in each device's
+  Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+  bit assignments are indicated via the sleep specifier in each device's
   sleep property.
 
 - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 06da4d4b44f..2031ddb33d0 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -225,7 +225,7 @@ For example, to match the 8323, revision 1.0:
      soc.major = 1
      soc.minor = 0
 
-'padding' is neccessary for structure alignment.  This field ensures that the
+'padding' is necessary for structure alignment.  This field ensures that the
 'extended_modes' field is aligned on a 64-bit boundary.
 
 'extended_modes' is a bitfield that defines special functionality which has an
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index 7224459b469..aae8355d316 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -131,8 +131,8 @@ Example:
   	}
 
   	/* Add new node and rebalance tree. */
-  	rb_link_node(data->node, parent, new);
-  	rb_insert_color(data->node, root);
+  	rb_link_node(&data->node, parent, new);
+  	rb_insert_color(&data->node, root);
 
 	return TRUE;
   }
@@ -146,10 +146,10 @@ To remove an existing node from a tree, call:
 
 Example:
 
-  struct mytype *data = mysearch(mytree, "walrus");
+  struct mytype *data = mysearch(&mytree, "walrus");
 
   if (data) {
-  	rb_erase(data->node, mytree);
+  	rb_erase(&data->node, &mytree);
   	myfree(data);
   }
 
@@ -188,5 +188,5 @@ Example:
 
   struct rb_node *node;
   for (node = rb_first(&mytree); node; node = rb_next(node))
-  	printk("key=%s\n", rb_entry(node, int, keystring));
+	printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
 
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 4d3ee317a4a..1b74b5f30af 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -1,575 +1,136 @@
-rfkill - RF switch subsystem support
-====================================
+rfkill - RF kill switch support
+===============================
 
-1 Introduction
-2 Implementation details
-3 Kernel driver guidelines
-3.1 wireless device drivers
-3.2 platform/switch drivers
-3.3 input device drivers
-4 Kernel API
-5 Userspace support
+1. Introduction
+2. Implementation details
+3. Kernel driver guidelines
+4. Kernel API
+5. Userspace support
 
 
-1. Introduction:
+1. Introduction
 
-The rfkill switch subsystem exists to add a generic interface to circuitry that
-can enable or disable the signal output of a wireless *transmitter* of any
-type.  By far, the most common use is to disable radio-frequency transmitters.
+The rfkill subsystem provides a generic interface to disabling any radio
+transmitter in the system. When a transmitter is blocked, it shall not
+radiate any power.
 
-Note that disabling the signal output means that the the transmitter is to be
-made to not emit any energy when "blocked".  rfkill is not about blocking data
-transmissions, it is about blocking energy emission.
+The subsystem also provides the ability to react on button presses and
+disable all transmitters of a certain type (or all). This is intended for
+situations where transmitters need to be turned off, for example on
+aircraft.
 
-The rfkill subsystem offers support for keys and switches often found on
-laptops to enable wireless devices like WiFi and Bluetooth, so that these keys
-and switches actually perform an action in all wireless devices of a given type
-attached to the system.
 
-The buttons to enable and disable the wireless transmitters are important in
-situations where the user is for example using his laptop on a location where
-radio-frequency transmitters _must_ be disabled (e.g. airplanes).
 
-Because of this requirement, userspace support for the keys should not be made
-mandatory.  Because userspace might want to perform some additional smarter
-tasks when the key is pressed, rfkill provides userspace the possibility to
-take over the task to handle the key events.
-
-===============================================================================
-2: Implementation details
+2. Implementation details
 
 The rfkill subsystem is composed of various components: the rfkill class, the
 rfkill-input module (an input layer handler), and some specific input layer
 events.
 
-The rfkill class provides kernel drivers with an interface that allows them to
-know when they should enable or disable a wireless network device transmitter.
-This is enabled by the CONFIG_RFKILL Kconfig option.
-
-The rfkill class support makes sure userspace will be notified of all state
-changes on rfkill devices through uevents.  It provides a notification chain
-for interested parties in the kernel to also get notified of rfkill state
-changes in other drivers.  It creates several sysfs entries which can be used
-by userspace.  See section "Userspace support".
-
-The rfkill-input module provides the kernel with the ability to implement a
-basic response when the user presses a key or button (or toggles a switch)
-related to rfkill functionality.  It is an in-kernel implementation of default
-policy of reacting to rfkill-related input events and neither mandatory nor
-required for wireless drivers to operate.  It is enabled by the
-CONFIG_RFKILL_INPUT Kconfig option.
-
-rfkill-input is a rfkill-related events input layer handler.  This handler will
-listen to all rfkill key events and will change the rfkill state of the
-wireless devices accordingly.  With this option enabled userspace could either
-do nothing or simply perform monitoring tasks.
-
-The rfkill-input module also provides EPO (emergency power-off) functionality
-for all wireless transmitters.  This function cannot be overridden, and it is
-always active.  rfkill EPO is related to *_RFKILL_ALL input layer events.
-
-
-Important terms for the rfkill subsystem:
-
-In order to avoid confusion, we avoid the term "switch" in rfkill when it is
-referring to an electronic control circuit that enables or disables a
-transmitter.  We reserve it for the physical device a human manipulates
-(which is an input device, by the way):
-
-rfkill switch:
-
-	A physical device a human manipulates.  Its state can be perceived by
-	the kernel either directly (through a GPIO pin, ACPI GPE) or by its
-	effect on a rfkill line of a wireless device.
-
-rfkill controller:
-
-	A hardware circuit that controls the state of a rfkill line, which a
-	kernel driver can interact with *to modify* that state (i.e. it has
-	either write-only or read/write access).
-
-rfkill line:
-
-	An input channel (hardware or software) of a wireless device, which
-	causes a wireless transmitter to stop emitting energy (BLOCK) when it
-	is active.  Point of view is extremely important here: rfkill lines are
-	always seen from the PoV of a wireless device (and its driver).
-
-soft rfkill line/software rfkill line:
-
-	A rfkill line the wireless device driver can directly change the state
-	of.  Related to rfkill_state RFKILL_STATE_SOFT_BLOCKED.
-
-hard rfkill line/hardware rfkill line:
-
-	A rfkill line that works fully in hardware or firmware, and that cannot
-	be overridden by the kernel driver.  The hardware device or the
-	firmware just exports its status to the driver, but it is read-only.
-	Related to rfkill_state RFKILL_STATE_HARD_BLOCKED.
-
-The enum rfkill_state describes the rfkill state of a transmitter:
-
-When a rfkill line or rfkill controller is in the RFKILL_STATE_UNBLOCKED state,
-the wireless transmitter (radio TX circuit for example) is *enabled*.  When the
-it is in the RFKILL_STATE_SOFT_BLOCKED or RFKILL_STATE_HARD_BLOCKED, the
-wireless transmitter is to be *blocked* from operating.
-
-RFKILL_STATE_SOFT_BLOCKED indicates that a call to toggle_radio() can change
-that state.  RFKILL_STATE_HARD_BLOCKED indicates that a call to toggle_radio()
-will not be able to change the state and will return with a suitable error if
-attempts are made to set the state to RFKILL_STATE_UNBLOCKED.
-
-RFKILL_STATE_HARD_BLOCKED is used by drivers to signal that the device is
-locked in the BLOCKED state by a hardwire rfkill line (typically an input pin
-that, when active, forces the transmitter to be disabled) which the driver
-CANNOT override.
-
-Full rfkill functionality requires two different subsystems to cooperate: the
-input layer and the rfkill class.  The input layer issues *commands* to the
-entire system requesting that devices registered to the rfkill class change
-state.  The way this interaction happens is not complex, but it is not obvious
-either:
-
-Kernel Input layer:
-
-	* Generates KEY_WWAN, KEY_WLAN, KEY_BLUETOOTH, SW_RFKILL_ALL, and
-	  other such events when the user presses certain keys, buttons, or
-	  toggles certain physical switches.
-
-	THE INPUT LAYER IS NEVER USED TO PROPAGATE STATUS, NOTIFICATIONS OR THE
-	KIND OF STUFF AN ON-SCREEN-DISPLAY APPLICATION WOULD REPORT.  It is
-	used to issue *commands* for the system to change behaviour, and these
-	commands may or may not be carried out by some kernel driver or
-	userspace application.  It follows that doing user feedback based only
-	on input events is broken, as there is no guarantee that an input event
-	will be acted upon.
-
-	Most wireless communication device drivers implementing rfkill
-	functionality MUST NOT generate these events, and have no reason to
-	register themselves with the input layer.  Doing otherwise is a common
-	misconception.  There is an API to propagate rfkill status change
-	information, and it is NOT the input layer.
-
-rfkill class:
-
-	* Calls a hook in a driver to effectively change the wireless
-	  transmitter state;
-	* Keeps track of the wireless transmitter state (with help from
-	  the driver);
-	* Generates userspace notifications (uevents) and a call to a
-	  notification chain (kernel) when there is a wireless transmitter
-	  state change;
-	* Connects a wireless communications driver with the common rfkill
-	  control system, which, for example, allows actions such as
-	  "switch all bluetooth devices offline" to be carried out by
-	  userspace or by rfkill-input.
-
-	THE RFKILL CLASS NEVER ISSUES INPUT EVENTS.  THE RFKILL CLASS DOES
-	NOT LISTEN TO INPUT EVENTS.  NO DRIVER USING THE RFKILL CLASS SHALL
-	EVER LISTEN TO, OR ACT ON RFKILL INPUT EVENTS.  Doing otherwise is
-	a layering violation.
-
-	Most wireless data communication drivers in the kernel have just to
-	implement the rfkill class API to work properly.  Interfacing to the
-	input layer is not often required (and is very often a *bug*) on
-	wireless drivers.
-
-	Platform drivers often have to attach to the input layer to *issue*
-	(but never to listen to) rfkill events for rfkill switches, and also to
-	the rfkill class to export a control interface for the platform rfkill
-	controllers to the rfkill subsystem.  This does NOT mean the rfkill
-	switch is attached to a rfkill class (doing so is almost always wrong).
-	It just means the same kernel module is the driver for different
-	devices (rfkill switches and rfkill controllers).
-
-
-Userspace input handlers (uevents) or kernel input handlers (rfkill-input):
-
-	* Implements the policy of what should happen when one of the input
-	  layer events related to rfkill operation is received.
-	* Uses the sysfs interface (userspace) or private rfkill API calls
-	  to tell the devices registered with the rfkill class to change
-	  their state (i.e. translates the input layer event into real
-	  action).
-
-	* rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0
-	  (power off all transmitters) in a special way: it ignores any
-	  overrides and local state cache and forces all transmitters to the
-	  RFKILL_STATE_SOFT_BLOCKED state (including those which are already
-	  supposed to be BLOCKED).
-	* rfkill EPO will remain active until rfkill-input receives an
-	  EV_SW SW_RFKILL_ALL 1 event.  While the EPO is active, transmitters
-	  are locked in the blocked state (rfkill will refuse to unblock them).
-	* rfkill-input implements different policies that the user can
-	  select for handling EV_SW SW_RFKILL_ALL 1.  It will unlock rfkill,
-	  and either do nothing (leave transmitters blocked, but now unlocked),
-	  restore the transmitters to their state before the EPO, or unblock
-	  them all.
-
-Userspace uevent handler or kernel platform-specific drivers hooked to the
-rfkill notifier chain:
-
-	* Taps into the rfkill notifier chain or to KOBJ_CHANGE uevents,
-	  in order to know when a device that is registered with the rfkill
-	  class changes state;
-	* Issues feedback notifications to the user;
-	* In the rare platforms where this is required, synthesizes an input
-	  event to command all *OTHER* rfkill devices to also change their
-	  statues when a specific rfkill device changes state.
-
-
-===============================================================================
-3: Kernel driver guidelines
-
-Remember: point-of-view is everything for a driver that connects to the rfkill
-subsystem.  All the details below must be measured/perceived from the point of
-view of the specific driver being modified.
-
-The first thing one needs to know is whether his driver should be talking to
-the rfkill class or to the input layer.  In rare cases (platform drivers), it
-could happen that you need to do both, as platform drivers often handle a
-variety of devices in the same driver.
-
-Do not mistake input devices for rfkill controllers.  The only type of "rfkill
-switch" device that is to be registered with the rfkill class are those
-directly controlling the circuits that cause a wireless transmitter to stop
-working (or the software equivalent of them), i.e. what we call a rfkill
-controller.  Every other kind of "rfkill switch" is just an input device and
-MUST NOT be registered with the rfkill class.
-
-A driver should register a device with the rfkill class when ALL of the
-following conditions are met (they define a rfkill controller):
-
-1. The device is/controls a data communications wireless transmitter;
-
-2. The kernel can interact with the hardware/firmware to CHANGE the wireless
-   transmitter state (block/unblock TX operation);
-
-3. The transmitter can be made to not emit any energy when "blocked":
-   rfkill is not about blocking data transmissions, it is about blocking
-   energy emission;
-
-A driver should register a device with the input subsystem to issue
-rfkill-related events (KEY_WLAN, KEY_BLUETOOTH, KEY_WWAN, KEY_WIMAX,
-SW_RFKILL_ALL, etc) when ALL of the folowing conditions are met:
-
-1. It is directly related to some physical device the user interacts with, to
-   command the O.S./firmware/hardware to enable/disable a data communications
-   wireless transmitter.
-
-   Examples of the physical device are: buttons, keys and switches the user
-   will press/touch/slide/switch to enable or disable the wireless
-   communication device.
-
-2. It is NOT slaved to another device, i.e. there is no other device that
-   issues rfkill-related input events in preference to this one.
-
-   Please refer to the corner cases and examples section for more details.
-
-When in doubt, do not issue input events.  For drivers that should generate
-input events in some platforms, but not in others (e.g. b43), the best solution
-is to NEVER generate input events in the first place.  That work should be
-deferred to a platform-specific kernel module (which will know when to generate
-events through the rfkill notifier chain) or to userspace.  This avoids the
-usual maintenance problems with DMI whitelisting.
-
-
-Corner cases and examples:
-====================================
-
-1. If the device is an input device that, because of hardware or firmware,
-causes wireless transmitters to be blocked regardless of the kernel's will, it
-is still just an input device, and NOT to be registered with the rfkill class.
-
-2. If the wireless transmitter switch control is read-only, it is an input
-device and not to be registered with the rfkill class (and maybe not to be made
-an input layer event source either, see below).
-
-3. If there is some other device driver *closer* to the actual hardware the
-user interacted with (the button/switch/key) to issue an input event, THAT is
-the device driver that should be issuing input events.
-
-E.g:
-  [RFKILL slider switch] -- [GPIO hardware] -- [WLAN card rf-kill input]
-                           (platform driver)    (wireless card driver)
-
-The user is closer to the RFKILL slide switch plaform driver, so the driver
-which must issue input events is the platform driver looking at the GPIO
-hardware, and NEVER the wireless card driver (which is just a slave).  It is
-very likely that there are other leaves than just the WLAN card rf-kill input
-(e.g. a bluetooth card, etc)...
-
-On the other hand, some embedded devices do this:
-
-  [RFKILL slider switch] -- [WLAN card rf-kill input]
-                             (wireless card driver)
-
-In this situation, the wireless card driver *could* register itself as an input
-device and issue rf-kill related input events... but in order to AVOID the need
-for DMI whitelisting, the wireless card driver does NOT do it.  Userspace (HAL)
-or a platform driver (that exists only on these embedded devices) will do the
-dirty job of issuing the input events.
-
-
-COMMON MISTAKES in kernel drivers, related to rfkill:
-====================================
-
-1. NEVER confuse input device keys and buttons with input device switches.
-
-  1a. Switches are always set or reset.  They report the current state
-      (on position or off position).
-
-  1b. Keys and buttons are either in the pressed or not-pressed state, and
-      that's it.  A "button" that latches down when you press it, and
-      unlatches when you press it again is in fact a switch as far as input
-      devices go.
-
-Add the SW_* events you need for switches, do NOT try to emulate a button using
-KEY_* events just because there is no such SW_* event yet.  Do NOT try to use,
-for example, KEY_BLUETOOTH when you should be using SW_BLUETOOTH instead.
-
-2. Input device switches (sources of EV_SW events) DO store their current state
-(so you *must* initialize it by issuing a gratuitous input layer event on
-driver start-up and also when resuming from sleep), and that state CAN be
-queried from userspace through IOCTLs.  There is no sysfs interface for this,
-but that doesn't mean you should break things trying to hook it to the rfkill
-class to get a sysfs interface :-)
-
-3. Do not issue *_RFKILL_ALL events by default, unless you are sure it is the
-correct event for your switch/button.  These events are emergency power-off
-events when they are trying to turn the transmitters off.  An example of an
-input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill
-switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch.
-An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by
-default, is any sort of hot key that is type-specific (e.g. the one for WLAN).
-
-
-3.1 Guidelines for wireless device drivers
-------------------------------------------
-
-(in this text, rfkill->foo means the foo field of struct rfkill).
-
-1. Each independent transmitter in a wireless device (usually there is only one
-transmitter per device) should have a SINGLE rfkill class attached to it.
-
-2. If the device does not have any sort of hardware assistance to allow the
-driver to rfkill the device, the driver should emulate it by taking all actions
-required to silence the transmitter.
-
-3. If it is impossible to silence the transmitter (i.e. it still emits energy,
-even if it is just in brief pulses, when there is no data to transmit and there
-is no hardware support to turn it off) do NOT lie to the users.  Do not attach
-it to a rfkill class.  The rfkill subsystem does not deal with data
-transmission, it deals with energy emission.  If the transmitter is emitting
-energy, it is not blocked in rfkill terms.
-
-4. It doesn't matter if the device has multiple rfkill input lines affecting
-the same transmitter, their combined state is to be exported as a single state
-per transmitter (see rule 1).
-
-This rule exists because users of the rfkill subsystem expect to get (and set,
-when possible) the overall transmitter rfkill state, not of a particular rfkill
-line.
-
-5. The wireless device driver MUST NOT leave the transmitter enabled during
-suspend and hibernation unless:
+The rfkill class is provided for kernel drivers to register their radio
+transmitter with the kernel, provide methods for turning it on and off and,
+optionally, letting the system know about hardware-disabled states that may
+be implemented on the device. This code is enabled with the CONFIG_RFKILL
+Kconfig option, which drivers can "select".
 
-	5.1. The transmitter has to be enabled for some sort of functionality
-	like wake-on-wireless-packet or autonomous packed forwarding in a mesh
-	network, and that functionality is enabled for this suspend/hibernation
-	cycle.
+The rfkill class code also notifies userspace of state changes, this is
+achieved via uevents. It also provides some sysfs files for userspace to
+check the status of radio transmitters. See the "Userspace support" section
+below.
 
-AND
 
-	5.2. The device was not on a user-requested BLOCKED state before
-	the suspend (i.e. the driver must NOT unblock a device, not even
-	to support wake-on-wireless-packet or remain in the mesh).
+The rfkill-input code implements a basic response to rfkill buttons -- it
+implements turning on/off all devices of a certain class (or all).
 
-In other words, there is absolutely no allowed scenario where a driver can
-automatically take action to unblock a rfkill controller (obviously, this deals
-with scenarios where soft-blocking or both soft and hard blocking is happening.
-Scenarios where hardware rfkill lines are the only ones blocking the
-transmitter are outside of this rule, since the wireless device driver does not
-control its input hardware rfkill lines in the first place).
+When the device is hard-blocked (either by a call to rfkill_set_hw_state()
+or from query_hw_block) set_block() will be invoked but drivers can well
+ignore the method call since they can use the return value of the function
+rfkill_set_hw_state() to sync the software state instead of keeping track
+of calls to set_block().
 
-6. During resume, rfkill will try to restore its previous state.
 
-7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio
-until it is resumed.
+The entire functionality is spread over more than one subsystem:
 
+ * The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and
+   SW_RFKILL_ALL -- when the user presses a button. Drivers for radio
+   transmitters generally do not register to the input layer, unless the
+   device really provides an input device (i.e. a button that has no
+   effect other than generating a button press event)
 
-Example of a WLAN wireless driver connected to the rfkill subsystem:
---------------------------------------------------------------------
+ * The rfkill-input code hooks up to these events and switches the soft-block
+   of the various radio transmitters, depending on the button type.
 
-A certain WLAN card has one input pin that causes it to block the transmitter
-and makes the status of that input pin available (only for reading!) to the
-kernel driver.  This is a hard rfkill input line (it cannot be overridden by
-the kernel driver).
+ * The rfkill drivers turn off/on their transmitters as requested.
 
-The card also has one PCI register that, if manipulated by the driver, causes
-it to block the transmitter.  This is a soft rfkill input line.
+ * The rfkill class will generate userspace notifications (uevents) to tell
+   userspace what the current state is.
 
-It has also a thermal protection circuitry that shuts down its transmitter if
-the card overheats, and makes the status of that protection available (only for
-reading!) to the kernel driver.  This is also a hard rfkill input line.
 
-If either one of these rfkill lines are active, the transmitter is blocked by
-the hardware and forced offline.
 
-The driver should allocate and attach to its struct device *ONE* instance of
-the rfkill class (there is only one transmitter).
+3. Kernel driver guidelines
 
-It can implement the get_state() hook, and return RFKILL_STATE_HARD_BLOCKED if
-either one of its two hard rfkill input lines are active.  If the two hard
-rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft
-rfkill input line is active.  Only if none of the rfkill input lines are
-active, will it return RFKILL_STATE_UNBLOCKED.
 
-Since the device has a hardware rfkill line, it IS subject to state changes
-external to rfkill.  Therefore, the driver must make sure that it calls
-rfkill_force_state() to keep the status always up-to-date, and it must do a
-rfkill_force_state() on resume from sleep.
+Drivers for radio transmitters normally implement only the rfkill class.
+These drivers may not unblock the transmitter based on own decisions, they
+should act on information provided by the rfkill class only.
 
-Every time the driver gets a notification from the card that one of its rfkill
-lines changed state (polling might be needed on badly designed cards that don't
-generate interrupts for such events), it recomputes the rfkill state as per
-above, and calls rfkill_force_state() to update it.
+Platform drivers might implement input devices if the rfkill button is just
+that, a button. If that button influences the hardware then you need to
+implement an rfkill class instead. This also applies if the platform provides
+a way to turn on/off the transmitter(s).
 
-The driver should implement the toggle_radio() hook, that:
+During suspend/hibernation, transmitters should only be left enabled when
+wake-on wlan or similar functionality requires it and the device wasn't
+blocked before suspend/hibernate. Note that it may be necessary to update
+the rfkill subsystem's idea of what the current state is at resume time if
+the state may have changed over suspend.
 
-1. Returns an error if one of the hardware rfkill lines are active, and the
-caller asked for RFKILL_STATE_UNBLOCKED.
 
-2. Activates the soft rfkill line if the caller asked for state
-RFKILL_STATE_SOFT_BLOCKED.  It should do this even if one of the hard rfkill
-lines are active, effectively double-blocking the transmitter.
 
-3. Deactivates the soft rfkill line if none of the hardware rfkill lines are
-active and the caller asked for RFKILL_STATE_UNBLOCKED.
-
-===============================================================================
-4: Kernel API
+4. Kernel API
 
 To build a driver with rfkill subsystem support, the driver should depend on
-(or select) the Kconfig symbol RFKILL; it should _not_ depend on RKFILL_INPUT.
+(or select) the Kconfig symbol RFKILL.
 
 The hardware the driver talks to may be write-only (where the current state
 of the hardware is unknown), or read-write (where the hardware can be queried
 about its current state).
 
-The rfkill class will call the get_state hook of a device every time it needs
-to know the *real* current state of the hardware.  This can happen often, but
-it does not do any polling, so it is not enough on hardware that is subject
-to state changes outside of the rfkill subsystem.
-
-Therefore, calling rfkill_force_state() when a state change happens is
-mandatory when the device has a hardware rfkill line, or when something else
-like the firmware could cause its state to be changed without going through the
-rfkill class.
-
-Some hardware provides events when its status changes.  In these cases, it is
-best for the driver to not provide a get_state hook, and instead register the
-rfkill class *already* with the correct status, and keep it updated using
-rfkill_force_state() when it gets an event from the hardware.
-
-rfkill_force_state() must be used on the device resume handlers to update the
-rfkill status, should there be any chance of the device status changing during
-the sleep.
-
-There is no provision for a statically-allocated rfkill struct.  You must
-use rfkill_allocate() to allocate one.
-
-You should:
-	- rfkill_allocate()
-	- modify rfkill fields (flags, name)
-	- modify state to the current hardware state (THIS IS THE ONLY TIME
-	  YOU CAN ACCESS state DIRECTLY)
-	- rfkill_register()
-
-The only way to set a device to the RFKILL_STATE_HARD_BLOCKED state is through
-a suitable return of get_state() or through rfkill_force_state().
+Calling rfkill_set_hw_state() when a state change happens is required from
+rfkill drivers that control devices that can be hard-blocked unless they also
+assign the poll_hw_block() callback (then the rfkill core will poll the
+device). Don't do this unless you cannot get the event in any other way.
 
-When a device is in the RFKILL_STATE_HARD_BLOCKED state, the only way to switch
-it to a different state is through a suitable return of get_state() or through
-rfkill_force_state().
 
-If toggle_radio() is called to set a device to state RFKILL_STATE_SOFT_BLOCKED
-when that device is already at the RFKILL_STATE_HARD_BLOCKED state, it should
-not return an error.  Instead, it should try to double-block the transmitter,
-so that its state will change from RFKILL_STATE_HARD_BLOCKED to
-RFKILL_STATE_SOFT_BLOCKED should the hardware blocking cease.
-
-Please refer to the source for more documentation.
-
-===============================================================================
-5: Userspace support
-
-rfkill devices issue uevents (with an action of "change"), with the following
-environment variables set:
-
-RFKILL_NAME
-RFKILL_STATE
-RFKILL_TYPE
 
-The ABI for these variables is defined by the sysfs attributes.  It is best
-to take a quick look at the source to make sure of the possible values.
+5. Userspace support
 
-It is expected that HAL will trap those, and bridge them to DBUS, etc.  These
-events CAN and SHOULD be used to give feedback to the user about the rfkill
-status of the system.
-
-Input devices may issue events that are related to rfkill.  These are the
-various KEY_* events and SW_* events supported by rfkill-input.c.
-
-******IMPORTANT******
-When rfkill-input is ACTIVE, userspace is NOT TO CHANGE THE STATE OF AN RFKILL
-SWITCH IN RESPONSE TO AN INPUT EVENT also handled by rfkill-input, unless it
-has set to true the user_claim attribute for that particular switch.  This rule
-is *absolute*; do NOT violate it.
-******IMPORTANT******
-
-Userspace must not assume it is the only source of control for rfkill switches.
-Their state CAN and WILL change due to firmware actions, direct user actions,
-and the rfkill-input EPO override for *_RFKILL_ALL.
-
-When rfkill-input is not active, userspace must initiate a rfkill status
-change by writing to the "state" attribute in order for anything to happen.
-
-Take particular care to implement EV_SW SW_RFKILL_ALL properly.  When that
-switch is set to OFF, *every* rfkill device *MUST* be immediately put into the
-RFKILL_STATE_SOFT_BLOCKED state, no questions asked.
-
-The following sysfs entries will be created:
+The following sysfs entries exist for every rfkill device:
 
 	name: Name assigned by driver to this key (interface or driver name).
 	type: Name of the key type ("wlan", "bluetooth", etc).
 	state: Current state of the transmitter
 		0: RFKILL_STATE_SOFT_BLOCKED
-			transmitter is forced off, but one can override it
-			by a write to the state attribute;
+			transmitter is turned off by software
 		1: RFKILL_STATE_UNBLOCKED
-			transmiter is NOT forced off, and may operate if
-			all other conditions for such operation are met
-			(such as interface is up and configured, etc);
+			transmitter is (potentially) active
 		2: RFKILL_STATE_HARD_BLOCKED
 			transmitter is forced off by something outside of
-			the driver's control.  One cannot set a device to
-			this state through writes to the state attribute;
-	claim: 1: Userspace handles events, 0: Kernel handles events
-
-Both the "state" and "claim" entries are also writable. For the "state" entry
-this means that when 1 or 0 is written, the device rfkill state (if not yet in
-the requested state), will be will be toggled accordingly.
-
-For the "claim" entry writing 1 to it means that the kernel no longer handles
-key events even though RFKILL_INPUT input was enabled. When "claim" has been
-set to 0, userspace should make sure that it listens for the input events or
-check the sysfs "state" entry regularly to correctly perform the required tasks
-when the rkfill key is pressed.
-
-A note about input devices and EV_SW events:
-
-In order to know the current state of an input device switch (like
-SW_RFKILL_ALL), you will need to use an IOCTL.  That information is not
-available through sysfs in a generic way at this time, and it is not available
-through the rfkill class AT ALL.
+			the driver's control.
+	claim: 0: Kernel handles events (currently always reads that value)
+
+rfkill devices also issue uevents (with an action of "change"), with the
+following environment variables set:
+
+RFKILL_NAME
+RFKILL_STATE
+RFKILL_TYPE
+
+The contents of these variables corresponds to the "name", "state" and
+"type" sysfs files explained above.
+
+An alternative userspace interface exists as a misc device /dev/rfkill,
+which allows userspace to obtain and set the state of rfkill devices and
+sets of devices. It also notifies userspace about device addition and
+removal. The API is a simple read/write API that is defined in
+linux/rfkill.h.
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 10711d9f078..1eb576a023b 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -1984,7 +1984,7 @@ break *$pc
 
 break *0x400618
 
-heres a really useful one for large programs
+Here's a really useful one for large programs
 rbr
 Set a breakpoint for all functions matching REGEXP
 e.g.
@@ -2211,7 +2211,7 @@ Breakpoint 2 at 0x4d87a4: file top.c, line 2609.
 #5  0x51692c in readline_internal () at readline.c:521
 #6  0x5164fe in readline (prompt=0x7ffff810 "\177ÿøx\177ÿ÷Ø\177ÿøxÀ")
     at readline.c:349
-#7  0x4d7a8a in command_line_input (prrompt=0x564420 "(gdb) ", repeat=1,
+#7  0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1,
     annotation_suffix=0x4d6b44 "prompt") at top.c:2091
 #8  0x4d6cf0 in command_loop () at top.c:1345
 #9  0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635
diff --git a/Documentation/scheduler/sched-nice-design.txt b/Documentation/scheduler/sched-nice-design.txt
index e2bae5a577e..3ac1e46d536 100644
--- a/Documentation/scheduler/sched-nice-design.txt
+++ b/Documentation/scheduler/sched-nice-design.txt
@@ -55,7 +55,7 @@ To sum it up: we always wanted to make nice levels more consistent, but
 within the constraints of HZ and jiffies and their nasty design level
 coupling to timeslices and granularity it was not really viable.
 
-The second (less frequent but still periodically occuring) complaint
+The second (less frequent but still periodically occurring) complaint
 about Linux's nice level support was its assymetry around the origo
 (which you can see demonstrated in the picture above), or more
 accurately: the fact that nice level behavior depended on the _absolute_
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 683ccae00ad..c014eccaf19 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -194,7 +194,7 @@ The following information is available in this file:
           - Packetized SCSI Protocol at 160MB/s and 320MB/s
           - Quick Arbitration Selection (QAS)
           - Retained Training Information (Rev B. ASIC only)
-        - Interrupt Coalessing
+        - Interrupt Coalescing
         - Initiator Mode (target mode not currently 
           supported)
         - Support for the PCI-X standard up to 133MHz
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 230e30846ef..08e2b4d04aa 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -206,7 +206,7 @@ of MOVE MEMORY instructions.
 The 896 and the 895A allows handling of the phase mismatch context from 
 SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor 
 until the C code has saved the context of the transfer).
-Implementing this without using LOAD/STORE instructions would be painfull 
+Implementing this without using LOAD/STORE instructions would be painful 
 and I didn't even want to try it.
 
 The 896 chip supports 64 bit PCI transactions and addressing, while the 
@@ -240,7 +240,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown SCSI devices do not properly support tagged command queuing.
+Some known SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that the hard disks I use on my machines behave well with 
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 49ea5c58c6b..eb9a7b905b6 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -206,7 +206,7 @@ characteristics. This feature may also reduce average command latency.
 In order to really gain advantage of this feature, devices must have 
 a reasonable cache size (No miracle is to be expected for a low-end 
 hard disk with 128 KB or less).
-Some kown old SCSI devices do not properly support tagged command queuing.
+Some known old SCSI devices do not properly support tagged command queuing.
 Generally, firmware revisions that fix this kind of problems are available 
 at respective vendor web/ftp sites.
 All I can say is that I never have had problem with tagged queuing using 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 5c08d96f407..4252697a95d 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -773,7 +773,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     single_cmd  - Use single immediate commands to communicate with
 		codecs (for debugging only)
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
-    power_save	- Automatic power-saving timtout (in second, 0 =
+    power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
     power_save_controller - Reset HD-audio controller in power-saving mode
 		(default = on)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 88b7433d2f1..71ac995b191 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -16,7 +16,7 @@ methods for the	HD-audio hardware.
 The HD-audio component consists of two parts: the controller chip and 
 the codec chips on the HD-audio bus.  Linux provides a single driver
 for all controllers, snd-hda-intel.  Although the driver name contains
-a word of a well-known harware vendor, it's not specific to it but for
+a word of a well-known hardware vendor, it's not specific to it but for
 all controller chips by other companies.  Since the HD-audio
 controllers are supposed to be compatible, the single snd-hda-driver
 should work in most cases.  But, not surprisingly, there are known
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt
index 34e87ec1379..de8efbc7e4b 100644
--- a/Documentation/sound/alsa/hda_codec.txt
+++ b/Documentation/sound/alsa/hda_codec.txt
@@ -114,7 +114,7 @@ For writing a sequence of verbs, use snd_hda_sequence_write().
 
 There are variants of cached read/write, snd_hda_codec_write_cache(),
 snd_hda_sequence_write_cache().  These are used for recording the
-register states for the power-mangement resume.  When no PM is needed,
+register states for the power-management resume.  When no PM is needed,
 these are equivalent with non-cached version.
 
 To retrieve the number of sub nodes connected to the given node, use
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index c302ddf629a..c4de6359d44 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -233,8 +233,8 @@ These protections are added to score to judge whether this zone should be used
 for page allocation or should be reclaimed.
 
 In this example, if normal pages (index=2) are required to this DMA zone and
-pages_high is used for watermark, the kernel judges this zone should not be
-used because pages_free(1355) is smaller than watermark + protection[2]
+watermark[WMARK_HIGH] is used for watermark, the kernel judges this zone should
+not be used because pages_free(1355) is smaller than watermark + protection[2]
 (4 + 2004 = 2008). If this protection value is 0, this zone would be used for
 normal page requirement. If requirement is DMA zone(index=0), protection[0]
 (=0) is used.
@@ -280,9 +280,10 @@ The default value is 65536.
 min_free_kbytes:
 
 This is used to force the Linux VM to keep a minimum number
-of kilobytes free.  The VM uses this number to compute a pages_min
-value for each lowmem zone in the system.  Each lowmem zone gets
-a number of reserved free pages based proportionally on its size.
+of kilobytes free.  The VM uses this number to compute a
+watermark[WMARK_MIN] value for each lowmem zone in the system.
+Each lowmem zone gets a number of reserved free pages based
+proportionally on its size.
 
 Some minimal amount of memory is needed to satisfy PF_MEMALLOC
 allocations; if you set this to lower than 1024KB, your system will
@@ -314,10 +315,14 @@ min_unmapped_ratio:
 
 This is available only on NUMA kernels.
 
-A percentage of the total pages in each zone.  Zone reclaim will only
-occur if more than this percentage of pages are file backed and unmapped.
-This is to insure that a minimal amount of local pages is still available for
-file I/O even if the node is overallocated.
+This is a percentage of the total pages in each zone. Zone reclaim will
+only occur if more than this percentage of pages are in a state that
+zone_reclaim_mode allows to be reclaimed.
+
+If zone_reclaim_mode has the value 4 OR'd, then the percentage is compared
+against all file-backed unmapped pages including swapcache pages and tmpfs
+files. Otherwise, only unmapped pages backed by normal files but not tmpfs
+files and similar are considered.
 
 The default is 1 percent.
 
@@ -358,7 +363,7 @@ nr_pdflush_threads
 The current number of pdflush threads.  This value is read-only.
 The value changes according to the number of dirty pages in the system.
 
-When neccessary, additional pdflush threads are created, one per second, up to
+When necessary, additional pdflush threads are created, one per second, up to
 nr_pdflush_threads_max.
 
 ==============================================================
@@ -565,7 +570,7 @@ swappiness
 
 This control is used to define how aggressive the kernel will swap
 memory pages.  Higher values will increase agressiveness, lower values
-descrease the amount of swap.
+decrease the amount of swap.
 
 The default value is 60.
 
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index e7c09abcfab..04763a32552 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -7,7 +7,7 @@ by Intel and Microsoft which can be found at
 
 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,
-each of which can generate oneshot interupts and at least one of which has
+each of which can generate oneshot interrupts and at least one of which has
 additional hardware to support periodic interrupts.  The comparators are
 also called "timers", which can be misleading since usually timers are
 independent of each other ... these share a counter, complicating resets.
diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt
index 20d368c5981..9bd00fc2e82 100644
--- a/Documentation/timers/timer_stats.txt
+++ b/Documentation/timers/timer_stats.txt
@@ -62,7 +62,7 @@ Timerstats sample period: 3.888770 s
 
 The first column is the number of events, the second column the pid, the third
 column is the name of the process. The forth column shows the function which
-initialized the timer and in parantheses the callback function which was
+initialized the timer and in parenthesis the callback function which was
 executed on expiry.
 
     Thomas, Ingo
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 2a82d860294..a39b3c749de 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -7,7 +7,6 @@ Copyright 2008 Red Hat Inc.
                (dual licensed under the GPL v2)
 Reviewers:   Elias Oltmanns, Randy Dunlap, Andrew Morton,
 	     John Kacur, and David Teigland.
-
 Written for: 2.6.28-rc2
 
 Introduction
@@ -33,13 +32,26 @@ The File System
 Ftrace uses the debugfs file system to hold the control files as
 well as the files to display output.
 
-To mount the debugfs system:
+When debugfs is configured into the kernel (which selecting any ftrace
+option will do) the directory /sys/kernel/debug will be created. To mount
+this directory, you can add to your /etc/fstab file:
+
+ debugfs       /sys/kernel/debug          debugfs defaults        0       0
+
+Or you can mount it at run time with:
+
+ mount -t debugfs nodev /sys/kernel/debug
 
-  # mkdir /debug
-  # mount -t debugfs nodev /debug
+For quicker access to that directory you may want to make a soft link to
+it:
 
-( Note: it is more common to mount at /sys/kernel/debug, but for
-  simplicity this document will use /debug)
+ ln -s /sys/kernel/debug /debug
+
+Any selected ftrace option will also create a directory called tracing
+within the debugfs. The rest of the document will assume that you are in
+the ftrace directory (cd /sys/kernel/debug/tracing) and will only concentrate
+on the files within that directory and not distract from the content with
+the extended "/sys/kernel/debug/tracing" path name.
 
 That's it! (assuming that you have ftrace configured into your kernel)
 
@@ -389,18 +401,18 @@ trace_options
 The trace_options file is used to control what gets printed in
 the trace output. To see what is available, simply cat the file:
 
-  cat /debug/tracing/trace_options
+  cat trace_options
   print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
   noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
 
 To disable one of the options, echo in the option prepended with
 "no".
 
-  echo noprint-parent > /debug/tracing/trace_options
+  echo noprint-parent > trace_options
 
 To enable an option, leave off the "no".
 
-  echo sym-offset > /debug/tracing/trace_options
+  echo sym-offset > trace_options
 
 Here are the available options:
 
@@ -476,11 +488,11 @@ sched_switch
 This tracer simply records schedule switches. Here is an example
 of how to use it.
 
- # echo sched_switch > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo sched_switch > current_tracer
+ # echo 1 > tracing_enabled
  # sleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
+ # echo 0 > tracing_enabled
+ # cat trace
 
 # tracer: sched_switch
 #
@@ -583,13 +595,13 @@ new trace is saved.
 To reset the maximum, echo 0 into tracing_max_latency. Here is
 an example:
 
- # echo irqsoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo irqsoff > current_tracer
+ # echo 0 > tracing_max_latency
+ # echo 1 > tracing_enabled
  # ls -ltr
  [...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
+ # echo 0 > tracing_enabled
+ # cat latency_trace
 # tracer: irqsoff
 #
 irqsoff latency trace v1.1.5 on 2.6.26
@@ -690,13 +702,13 @@ Like the irqsoff tracer, it records the maximum latency for
 which preemption was disabled. The control of preemptoff tracer
 is much like the irqsoff tracer.
 
- # echo preemptoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo preemptoff > current_tracer
+ # echo 0 > tracing_max_latency
+ # echo 1 > tracing_enabled
  # ls -ltr
  [...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
+ # echo 0 > tracing_enabled
+ # cat latency_trace
 # tracer: preemptoff
 #
 preemptoff latency trace v1.1.5 on 2.6.26-rc8
@@ -837,13 +849,13 @@ tracer.
 Again, using this trace is much like the irqsoff and preemptoff
 tracers.
 
- # echo preemptirqsoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo preemptirqsoff > current_tracer
+ # echo 0 > tracing_max_latency
+ # echo 1 > tracing_enabled
  # ls -ltr
  [...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
+ # echo 0 > tracing_enabled
+ # cat latency_trace
 # tracer: preemptirqsoff
 #
 preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
@@ -999,12 +1011,12 @@ slightly differently than we did with the previous tracers.
 Instead of performing an 'ls', we will run 'sleep 1' under
 'chrt' which changes the priority of the task.
 
- # echo wakeup > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo wakeup > current_tracer
+ # echo 0 > tracing_max_latency
+ # echo 1 > tracing_enabled
  # chrt -f 5 sleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
+ # echo 0 > tracing_enabled
+ # cat latency_trace
 # tracer: wakeup
 #
 wakeup latency trace v1.1.5 on 2.6.26-rc8
@@ -1114,11 +1126,11 @@ can be done from the debug file system. Make sure the
 ftrace_enabled is set; otherwise this tracer is a nop.
 
  # sysctl kernel.ftrace_enabled=1
- # echo function > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo function > current_tracer
+ # echo 1 > tracing_enabled
  # usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
+ # echo 0 > tracing_enabled
+ # cat trace
 # tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
@@ -1155,7 +1167,7 @@ int trace_fd;
 [...]
 int main(int argc, char *argv[]) {
 	[...]
-	trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY);
+	trace_fd = open(tracing_file("tracing_enabled"), O_WRONLY);
 	[...]
 	if (condition_hit()) {
 		write(trace_fd, "0", 1);
@@ -1163,26 +1175,20 @@ int main(int argc, char *argv[]) {
 	[...]
 }
 
-Note: Here we hard coded the path name. The debugfs mount is not
-guaranteed to be at /debug (and is more commonly at
-/sys/kernel/debug). For simple one time traces, the above is
-sufficent. For anything else, a search through /proc/mounts may
-be needed to find where the debugfs file-system is mounted.
-
 
 Single thread tracing
 ---------------------
 
-By writing into /debug/tracing/set_ftrace_pid you can trace a
+By writing into set_ftrace_pid you can trace a
 single thread. For example:
 
-# cat /debug/tracing/set_ftrace_pid
+# cat set_ftrace_pid
 no pid
-# echo 3111 > /debug/tracing/set_ftrace_pid
-# cat /debug/tracing/set_ftrace_pid
+# echo 3111 > set_ftrace_pid
+# cat set_ftrace_pid
 3111
-# echo function > /debug/tracing/current_tracer
-# cat /debug/tracing/trace | head
+# echo function > current_tracer
+# cat trace | head
  # tracer: function
  #
  #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
@@ -1193,8 +1199,8 @@ no pid
      yum-updatesd-3111  [003]  1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel
      yum-updatesd-3111  [003]  1637.254685: fget_light <-do_sys_poll
      yum-updatesd-3111  [003]  1637.254686: pipe_poll <-do_sys_poll
-# echo -1 > /debug/tracing/set_ftrace_pid
-# cat /debug/tracing/trace |head
+# echo -1 > set_ftrace_pid
+# cat trace |head
  # tracer: function
  #
  #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
@@ -1216,6 +1222,51 @@ something like this simple program:
 #include <fcntl.h>
 #include <unistd.h>
 
+#define _STR(x) #x
+#define STR(x) _STR(x)
+#define MAX_PATH 256
+
+const char *find_debugfs(void)
+{
+       static char debugfs[MAX_PATH+1];
+       static int debugfs_found;
+       char type[100];
+       FILE *fp;
+
+       if (debugfs_found)
+               return debugfs;
+
+       if ((fp = fopen("/proc/mounts","r")) == NULL) {
+               perror("/proc/mounts");
+               return NULL;
+       }
+
+       while (fscanf(fp, "%*s %"
+                     STR(MAX_PATH)
+                     "s %99s %*s %*d %*d\n",
+                     debugfs, type) == 2) {
+               if (strcmp(type, "debugfs") == 0)
+                       break;
+       }
+       fclose(fp);
+
+       if (strcmp(type, "debugfs") != 0) {
+               fprintf(stderr, "debugfs not mounted");
+               return NULL;
+       }
+
+       debugfs_found = 1;
+
+       return debugfs;
+}
+
+const char *tracing_file(const char *file_name)
+{
+       static char trace_file[MAX_PATH+1];
+       snprintf(trace_file, MAX_PATH, "%s/%s", find_debugfs(), file_name);
+       return trace_file;
+}
+
 int main (int argc, char **argv)
 {
         if (argc < 1)
@@ -1226,12 +1277,12 @@ int main (int argc, char **argv)
                 char line[64];
                 int s;
 
-                ffd = open("/debug/tracing/current_tracer", O_WRONLY);
+                ffd = open(tracing_file("current_tracer"), O_WRONLY);
                 if (ffd < 0)
                         exit(-1);
                 write(ffd, "nop", 3);
 
-                fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY);
+                fd = open(tracing_file("set_ftrace_pid"), O_WRONLY);
                 s = sprintf(line, "%d\n", getpid());
                 write(fd, line, s);
 
@@ -1383,22 +1434,22 @@ want, depending on your needs.
   tracing_cpu_mask file) or you might sometimes see unordered
   function calls while cpu tracing switch.
 
-	hide: echo nofuncgraph-cpu > /debug/tracing/trace_options
-	show: echo funcgraph-cpu > /debug/tracing/trace_options
+	hide: echo nofuncgraph-cpu > trace_options
+	show: echo funcgraph-cpu > trace_options
 
 - The duration (function's time of execution) is displayed on
   the closing bracket line of a function or on the same line
   than the current function in case of a leaf one. It is default
   enabled.
 
-	hide: echo nofuncgraph-duration > /debug/tracing/trace_options
-	show: echo funcgraph-duration > /debug/tracing/trace_options
+	hide: echo nofuncgraph-duration > trace_options
+	show: echo funcgraph-duration > trace_options
 
 - The overhead field precedes the duration field in case of
   reached duration thresholds.
 
-	hide: echo nofuncgraph-overhead > /debug/tracing/trace_options
-	show: echo funcgraph-overhead > /debug/tracing/trace_options
+	hide: echo nofuncgraph-overhead > trace_options
+	show: echo funcgraph-overhead > trace_options
 	depends on: funcgraph-duration
 
   ie:
@@ -1427,8 +1478,8 @@ want, depending on your needs.
 - The task/pid field displays the thread cmdline and pid which
   executed the function. It is default disabled.
 
-	hide: echo nofuncgraph-proc > /debug/tracing/trace_options
-	show: echo funcgraph-proc > /debug/tracing/trace_options
+	hide: echo nofuncgraph-proc > trace_options
+	show: echo funcgraph-proc > trace_options
 
   ie:
 
@@ -1451,8 +1502,8 @@ want, depending on your needs.
   system clock since it started. A snapshot of this time is
   given on each entry/exit of functions
 
-	hide: echo nofuncgraph-abstime > /debug/tracing/trace_options
-	show: echo funcgraph-abstime > /debug/tracing/trace_options
+	hide: echo nofuncgraph-abstime > trace_options
+	show: echo funcgraph-abstime > trace_options
 
   ie:
 
@@ -1549,7 +1600,7 @@ listed in:
 
    available_filter_functions
 
- # cat /debug/tracing/available_filter_functions
+ # cat available_filter_functions
 put_prev_task_idle
 kmem_cache_create
 pick_next_task_rt
@@ -1561,12 +1612,12 @@ mutex_lock
 If I am only interested in sys_nanosleep and hrtimer_interrupt:
 
  # echo sys_nanosleep hrtimer_interrupt \
-		> /debug/tracing/set_ftrace_filter
- # echo ftrace > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
+		> set_ftrace_filter
+ # echo ftrace > current_tracer
+ # echo 1 > tracing_enabled
  # usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
+ # echo 0 > tracing_enabled
+ # cat trace
 # tracer: ftrace
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
@@ -1577,7 +1628,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt:
 
 To see which functions are being traced, you can cat the file:
 
- # cat /debug/tracing/set_ftrace_filter
+ # cat set_ftrace_filter
 hrtimer_interrupt
 sys_nanosleep
 
@@ -1597,7 +1648,7 @@ Note: It is better to use quotes to enclose the wild cards,
       otherwise the shell may expand the parameters into names
       of files in the local directory.
 
- # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter
+ # echo 'hrtimer_*' > set_ftrace_filter
 
 Produces:
 
@@ -1618,7 +1669,7 @@ Produces:
 
 Notice that we lost the sys_nanosleep.
 
- # cat /debug/tracing/set_ftrace_filter
+ # cat set_ftrace_filter
 hrtimer_run_queues
 hrtimer_run_pending
 hrtimer_init
@@ -1644,17 +1695,17 @@ To append to the filters, use '>>'
 To clear out a filter so that all functions will be recorded
 again:
 
- # echo > /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
+ # echo > set_ftrace_filter
+ # cat set_ftrace_filter
  #
 
 Again, now we want to append.
 
- # echo sys_nanosleep > /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
+ # echo sys_nanosleep > set_ftrace_filter
+ # cat set_ftrace_filter
 sys_nanosleep
- # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
+ # echo 'hrtimer_*' >> set_ftrace_filter
+ # cat set_ftrace_filter
 hrtimer_run_queues
 hrtimer_run_pending
 hrtimer_init
@@ -1677,7 +1728,7 @@ hrtimer_init_sleeper
 The set_ftrace_notrace prevents those functions from being
 traced.
 
- # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
+ # echo '*preempt*' '*lock*' > set_ftrace_notrace
 
 Produces:
 
@@ -1767,13 +1818,13 @@ the effect on the tracing is different. Every read from
 trace_pipe is consumed. This means that subsequent reads will be
 different. The trace is live.
 
- # echo function > /debug/tracing/current_tracer
- # cat /debug/tracing/trace_pipe > /tmp/trace.out &
+ # echo function > current_tracer
+ # cat trace_pipe > /tmp/trace.out &
 [1] 4153
- # echo 1 > /debug/tracing/tracing_enabled
+ # echo 1 > tracing_enabled
  # usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
+ # echo 0 > tracing_enabled
+ # cat trace
 # tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
@@ -1809,7 +1860,7 @@ number listed is the number of entries that can be recorded per
 CPU. To know the full size, multiply the number of possible CPUS
 with the number of entries.
 
- # cat /debug/tracing/buffer_size_kb
+ # cat buffer_size_kb
 1408 (units kilobytes)
 
 Note, to modify this, you must have tracing completely disabled.
@@ -1817,21 +1868,21 @@ To do that, echo "nop" into the current_tracer. If the
 current_tracer is not set to "nop", an EINVAL error will be
 returned.
 
- # echo nop > /debug/tracing/current_tracer
- # echo 10000 > /debug/tracing/buffer_size_kb
- # cat /debug/tracing/buffer_size_kb
+ # echo nop > current_tracer
+ # echo 10000 > buffer_size_kb
+ # cat buffer_size_kb
 10000 (units kilobytes)
 
 The number of pages which will be allocated is limited to a
 percentage of available memory. Allocating too much will produce
 an error.
 
- # echo 1000000000000 > /debug/tracing/buffer_size_kb
+ # echo 1000000000000 > buffer_size_kb
 -bash: echo: write error: Cannot allocate memory
- # cat /debug/tracing/buffer_size_kb
+ # cat buffer_size_kb
 85
 
 -----------
 
 More details can be found in the source code, in the
-kernel/tracing/*.c files.
+kernel/trace/*.c files.
diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
index a956d9b7f94..6308735e58c 100644
--- a/Documentation/trace/kmemtrace.txt
+++ b/Documentation/trace/kmemtrace.txt
@@ -64,7 +64,7 @@ III. Quick usage guide
 CONFIG_KMEMTRACE).
 
 2) Get the userspace tool and build it:
-$ git-clone git://repo.or.cz/kmemtrace-user.git		# current repository
+$ git clone git://repo.or.cz/kmemtrace-user.git		# current repository
 $ cd kmemtrace-user/
 $ ./autogen.sh
 $ ./configure
diff --git a/Documentation/trace/mmiotrace.txt b/Documentation/trace/mmiotrace.txt
index 5731c67abc5..162effbfbde 100644
--- a/Documentation/trace/mmiotrace.txt
+++ b/Documentation/trace/mmiotrace.txt
@@ -32,41 +32,41 @@ is no way to automatically detect if you are losing events due to CPUs racing.
 Usage Quick Reference
 ---------------------
 
-$ mount -t debugfs debugfs /debug
-$ echo mmiotrace > /debug/tracing/current_tracer
-$ cat /debug/tracing/trace_pipe > mydump.txt &
+$ mount -t debugfs debugfs /sys/kernel/debug
+$ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
+$ cat /sys/kernel/debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
-$ echo "X is up" > /debug/tracing/trace_marker
-$ echo nop > /debug/tracing/current_tracer
+$ echo "X is up" > /sys/kernel/debug/tracing/trace_marker
+$ echo nop > /sys/kernel/debug/tracing/current_tracer
 Check for lost events.
 
 
 Usage
 -----
 
-Make sure debugfs is mounted to /debug. If not, (requires root privileges)
-$ mount -t debugfs debugfs /debug
+Make sure debugfs is mounted to /sys/kernel/debug. If not, (requires root privileges)
+$ mount -t debugfs debugfs /sys/kernel/debug
 
 Check that the driver you are about to trace is not loaded.
 
 Activate mmiotrace (requires root privileges):
-$ echo mmiotrace > /debug/tracing/current_tracer
+$ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
 
 Start storing the trace:
-$ cat /debug/tracing/trace_pipe > mydump.txt &
+$ cat /sys/kernel/debug/tracing/trace_pipe > mydump.txt &
 The 'cat' process should stay running (sleeping) in the background.
 
 Load the driver you want to trace and use it. Mmiotrace will only catch MMIO
 accesses to areas that are ioremapped while mmiotrace is active.
 
 During tracing you can place comments (markers) into the trace by
-$ echo "X is up" > /debug/tracing/trace_marker
+$ echo "X is up" > /sys/kernel/debug/tracing/trace_marker
 This makes it easier to see which part of the (huge) trace corresponds to
 which action. It is recommended to place descriptive markers about what you
 do.
 
 Shut down mmiotrace (requires root privileges):
-$ echo nop > /debug/tracing/current_tracer
+$ echo nop > /sys/kernel/debug/tracing/current_tracer
 The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
 pressing ctrl+c.
 
@@ -78,10 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
 events were lost, the trace is incomplete. You should enlarge the buffers and
 try again. Buffers are enlarged by first seeing how large the current buffers
 are:
-$ cat /debug/tracing/buffer_size_kb
+$ cat /sys/kernel/debug/tracing/buffer_size_kb
 gives you a number. Approximately double this number and write it back, for
 instance:
-$ echo 128000 > /debug/tracing/buffer_size_kb
+$ echo 128000 > /sys/kernel/debug/tracing/buffer_size_kb
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index 4c3d62c7843..c480e9c32db 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -84,7 +84,7 @@ The different logical parts of this driver are:
 
       *UWB*: the Ultra-Wide-Band stack -- manages the radio and
       associated spectrum to allow for devices sharing it. Allows to
-      control bandwidth assingment, beaconing, scanning, etc
+      control bandwidth assignment, beaconing, scanning, etc
 
     *
 
@@ -184,7 +184,7 @@ and sends the replies and notifications back to the API
 [/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that
 is chartered, among other things, to keep the tab of how the UWB radio
 neighborhood looks, creating and destroying devices as they show up or
-dissapear.
+disappear.
 
 Command execution is very simple: a command block is sent and a event
 block or reply is expected back. For sending/receiving command/events, a
@@ -333,7 +333,7 @@ read descriptors and move our data.
 
 *Device life cycle and keep alives*
 
-Everytime there is a succesful transfer to/from a device, we update a
+Every time there is a successful transfer to/from a device, we update a
 per-device activity timestamp. If not, every now and then we check and
 if the activity timestamp gets old, we ping the device by sending it a
 Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this
@@ -411,7 +411,7 @@ context (wa_xfer) and submit it. When the xfer is done, our callback is
 called and we assign the status bits and release the xfer resources.
 
 In dequeue() we are basically cancelling/aborting the transfer. We issue
-a xfer abort request to the HC, cancell all the URBs we had submitted
+a xfer abort request to the HC, cancel all the URBs we had submitted
 and not yet done and when all that is done, the xfer callback will be
 called--this will call the URB callback.
 
diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt
index 6f24f566955..fe6a99a32bb 100644
--- a/Documentation/usb/anchors.txt
+++ b/Documentation/usb/anchors.txt
@@ -27,7 +27,7 @@ Association and disassociation of URBs with anchors
 
 An association of URBs to an anchor is made by an explicit
 call to usb_anchor_urb(). The association is maintained until
-an URB is finished by (successfull) completion. Thus disassociation
+an URB is finished by (successful) completion. Thus disassociation
 is automatic. A function is provided to forcibly finish (kill)
 all URBs associated with an anchor.
 Furthermore, disassociation can be made with usb_unanchor_urb()
@@ -76,4 +76,4 @@ usb_get_from_anchor()
 Returns the oldest anchored URB of an anchor. The URB is unanchored
 and returned with a reference. As you may mix URBs to several
 destinations in one anchor you have no guarantee the chronologically
-first submitted URB is returned.
\ No newline at end of file
+first submitted URB is returned.
diff --git a/Documentation/usb/callbacks.txt b/Documentation/usb/callbacks.txt
index 7c812411945..bfb36b34b79 100644
--- a/Documentation/usb/callbacks.txt
+++ b/Documentation/usb/callbacks.txt
@@ -65,7 +65,7 @@ Accept or decline an interface. If you accept the device return 0,
 otherwise -ENODEV or -ENXIO. Other error codes should be used only if a
 genuine error occurred during initialisation which prevented a driver
 from accepting a device that would else have been accepted.
-You are strongly encouraged to use usbcore'sfacility,
+You are strongly encouraged to use usbcore's facility,
 usb_set_intfdata(), to associate a data structure with an interface, so
 that you know which internal state and identity you associate with a
 particular interface. The device will not be suspended and you may do IO
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 91aa3c0f0dd..450b8f8c389 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -16,3 +16,8 @@
  15 -> TeVii S470                                          [d470:9022]
  16 -> DVBWorld DVB-S2 2005                                [0001:2005]
  17 -> NetUP Dual DVB-S2 CI                                [1b55:2a2c]
+ 18 -> Hauppauge WinTV-HVR1270                             [0070:2211]
+ 19 -> Hauppauge WinTV-HVR1275                             [0070:2215]
+ 20 -> Hauppauge WinTV-HVR1255                             [0070:2251]
+ 21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295]
+ 22 -> Mygica X8506 DMB-TH                                 [14f1:8651]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 71e9db0b26f..89093f53172 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -78,3 +78,5 @@
  77 -> TBS 8910 DVB-S                                      [8910:8888]
  78 -> Prof 6200 DVB-S                                     [b022:3022]
  79 -> Terratec Cinergy HT PCI MKII                        [153b:1177]
+ 80 -> Hauppauge WinTV-IR Only                             [0070:9290]
+ 81 -> Leadtek WinFast DTV1800 Hybrid                      [107d:6654]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 78d0a6eed57..a98a688c11b 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -17,7 +17,7 @@
  16 -> Hauppauge WinTV HVR 950                  (em2883)        [2040:6513,2040:6517,2040:651b]
  17 -> Pinnacle PCTV HD Pro Stick               (em2880)        [2304:0227]
  18 -> Hauppauge WinTV HVR 900 (R2)             (em2880)        [2040:6502]
- 19 -> PointNix Intra-Oral Camera               (em2860)
+ 19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
  22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
@@ -61,3 +61,7 @@
  63 -> Kaiomy TVnPC U2                          (em2860)        [eb1a:e303]
  64 -> Easy Cap Capture DC-60                   (em2860)
  65 -> IO-DATA GV-MVP/SZ                        (em2820/em2840) [04bb:0515]
+ 66 -> Empire dual TV                           (em2880)
+ 67 -> Terratec Grabby                          (em2860)        [0ccd:0096]
+ 68 -> Terratec AV350                           (em2860)        [0ccd:0084]
+ 69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 6dacf282525..15562427e8a 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -124,10 +124,10 @@
 123 -> Beholder BeholdTV 407                    [0000:4070]
 124 -> Beholder BeholdTV 407 FM                 [0000:4071]
 125 -> Beholder BeholdTV 409                    [0000:4090]
-126 -> Beholder BeholdTV 505 FM/RDS             [0000:5051,0000:505B,5ace:5050]
-127 -> Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM [0000:5071,0000:507B,5ace:5070,5ace:5090]
+126 -> Beholder BeholdTV 505 FM                 [5ace:5050]
+127 -> Beholder BeholdTV 507 FM / BeholdTV 509 FM [5ace:5070,5ace:5090]
 128 -> Beholder BeholdTV Columbus TVFM          [0000:5201]
-129 -> Beholder BeholdTV 607 / BeholdTV 609     [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093]
+129 -> Beholder BeholdTV 607 FM                 [5ace:6070]
 130 -> Beholder BeholdTV M6                     [5ace:6190]
 131 -> Twinhan Hybrid DTV-DVB 3056 PCI          [1822:0022]
 132 -> Genius TVGO AM11MCE
@@ -143,7 +143,7 @@
 142 -> Beholder BeholdTV H6                     [5ace:6290]
 143 -> Beholder BeholdTV M63                    [5ace:6191]
 144 -> Beholder BeholdTV M6 Extra               [5ace:6193]
-145 -> AVerMedia MiniPCI DVB-T Hybrid M103      [1461:f636]
+145 -> AVerMedia MiniPCI DVB-T Hybrid M103      [1461:f636,1461:f736]
 146 -> ASUSTeK P7131 Analog
 147 -> Asus Tiger 3in1                          [1043:4878]
 148 -> Encore ENLTV-FM v5.3                     [1a7f:2008]
@@ -154,4 +154,16 @@
 153 -> Kworld Plus TV Analog Lite PCI           [17de:7128]
 154 -> Avermedia AVerTV GO 007 FM Plus          [1461:f31d]
 155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3                [0070:6707,0070:6709,0070:670a]
+156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid   [0070:6707,0070:6709,0070:670a]
+157 -> Avermedia AVerTV Studio 507UA            [1461:a11b]
+158 -> AVerMedia Cardbus TV/Radio (E501R)       [1461:b7e9]
+159 -> Beholder BeholdTV 505 RDS                [0000:505B]
+160 -> Beholder BeholdTV 507 RDS                [0000:5071]
+161 -> Beholder BeholdTV 507 RDS                [0000:507B]
+162 -> Beholder BeholdTV 607 FM                 [5ace:6071]
+163 -> Beholder BeholdTV 609 FM                 [5ace:6090]
+164 -> Beholder BeholdTV 609 FM                 [5ace:6091]
+165 -> Beholder BeholdTV 607 RDS                [5ace:6072]
+166 -> Beholder BeholdTV 607 RDS                [5ace:6073]
+167 -> Beholder BeholdTV 609 RDS                [5ace:6092]
+168 -> Beholder BeholdTV 609 RDS                [5ace:6093]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 691d2f37dc5..be67844074d 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -76,3 +76,5 @@ tuner=75 - Philips TEA5761 FM Radio
 tuner=76 - Xceive 5000 tuner
 tuner=77 - TCL tuner MF02GIP-5N-E
 tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner
+tuner=79 - Philips PAL/SECAM multi (FM1216 MK5)
+tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 914cb7e734a..4652c0f5da3 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -11,7 +11,7 @@ encoder chip:
 2) Some people have problems getting the i2c bus to work.
    The symptom is that the eeprom cannot be read and the card is
    unusable. This is probably fixed, but if you have problems
-   then post to the video4linux or ivtv-users mailinglist.
+   then post to the video4linux or ivtv-users mailing list.
 
 3) VBI (raw or sliced) has not yet been implemented.
 
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 98529e03a46..2bcf78896e2 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -163,10 +163,11 @@ sunplus		055f:c650	Mustek MDC5500Z
 zc3xx		055f:d003	Mustek WCam300A
 zc3xx		055f:d004	Mustek WCam300 AN
 conex		0572:0041	Creative Notebook cx11646
-ov519		05a9:0519	OmniVision
+ov519		05a9:0519	OV519 Microphone
 ov519		05a9:0530	OmniVision
-ov519		05a9:4519	OmniVision
+ov519		05a9:4519	Webcam Classic
 ov519		05a9:8519	OmniVision
+ov519		05a9:a518	D-Link DSB-C310 Webcam
 sunplus		05da:1018	Digital Dream Enigma 1.3
 stk014		05e1:0893	Syntek DV4000
 spca561		060b:a001	Maxell Compact Pc PM3
@@ -178,6 +179,7 @@ spca506		06e1:a190	ADS Instant VCD
 ov534		06f8:3002	Hercules Blog Webcam
 ov534		06f8:3003	Hercules Dualpix HD Weblog
 sonixj		06f8:3004	Hercules Classic Silver
+sonixj		06f8:3008	Hercules Deluxe Optical Glass
 spca508		0733:0110	ViewQuest VQ110
 spca508		0130:0130	Clone Digital Webcam 11043
 spca501		0733:0401	Intel Create and Share
@@ -209,6 +211,7 @@ sunplus		08ca:2050	Medion MD 41437
 sunplus		08ca:2060	Aiptek PocketDV5300
 tv8532		0923:010f	ICM532 cams
 mars		093a:050f	Mars-Semi Pc-Camera
+mr97310a	093a:010f	Sakar Digital no. 77379
 pac207		093a:2460	Qtec Webcam 100
 pac207		093a:2461	HP Webcam
 pac207		093a:2463	Philips SPC 220 NC
@@ -265,6 +268,11 @@ sonixj		0c45:60ec	SN9C105+MO4000
 sonixj		0c45:60fb	Surfer NoName
 sonixj		0c45:60fc	LG-LIC300
 sonixj		0c45:60fe	Microdia Audio
+sonixj		0c45:6100	PC Camera (SN9C128)
+sonixj		0c45:610a	PC Camera (SN9C128)
+sonixj		0c45:610b	PC Camera (SN9C128)
+sonixj		0c45:610c	PC Camera (SN9C128)
+sonixj		0c45:610e	PC Camera (SN9C128)
 sonixj		0c45:6128	Microdia/Sonix SNP325
 sonixj		0c45:612a	Avant Camera
 sonixj		0c45:612c	Typhoon Rasy Cam 1.3MPix
diff --git a/Documentation/video4linux/pxa_camera.txt b/Documentation/video4linux/pxa_camera.txt
index b1137f9a53e..4f6d0ca0195 100644
--- a/Documentation/video4linux/pxa_camera.txt
+++ b/Documentation/video4linux/pxa_camera.txt
@@ -26,6 +26,55 @@ Global video workflow
 
      Once the last buffer is filled in, the QCI interface stops.
 
+  c) Capture global finite state machine schema
+
+      +----+                             +---+  +----+
+      | DQ |                             | Q |  | DQ |
+      |    v                             |   v  |    v
+    +-----------+                     +------------------------+
+    |   STOP    |                     | Wait for capture start |
+    +-----------+         Q           +------------------------+
++-> | QCI: stop | ------------------> | QCI: run               | <------------+
+|   | DMA: stop |                     | DMA: stop              |              |
+|   +-----------+             +-----> +------------------------+              |
+|                            /                            |                   |
+|                           /             +---+  +----+   |                   |
+|capture list empty        /              | Q |  | DQ |   | QCI Irq EOF       |
+|                         /               |   v  |    v   v                   |
+|   +--------------------+             +----------------------+               |
+|   | DMA hotlink missed |             |    Capture running   |               |
+|   +--------------------+             +----------------------+               |
+|   | QCI: run           |     +-----> | QCI: run             | <-+           |
+|   | DMA: stop          |    /        | DMA: run             |   |           |
+|   +--------------------+   /         +----------------------+   | Other     |
+|     ^                     /DMA still            |               | channels  |
+|     | capture list       /  running             | DMA Irq End   | not       |
+|     | not empty         /                       |               | finished  |
+|     |                  /                        v               | yet       |
+|   +----------------------+           +----------------------+   |           |
+|   |  Videobuf released   |           |  Channel completed   |   |           |
+|   +----------------------+           +----------------------+   |           |
++-- | QCI: run             |           | QCI: run             | --+           |
+    | DMA: run             |           | DMA: run             |               |
+    +----------------------+           +----------------------+               |
+               ^                      /           |                           |
+               |          no overrun /            | overrun                   |
+               |                    /             v                           |
+    +--------------------+         /   +----------------------+               |
+    |  Frame completed   |        /    |     Frame overran    |               |
+    +--------------------+ <-----+     +----------------------+ restart frame |
+    | QCI: run           |             | QCI: stop            | --------------+
+    | DMA: run           |             | DMA: stop            |
+    +--------------------+             +----------------------+
+
+    Legend: - each box is a FSM state
+            - each arrow is the condition to transition to another state
+            - an arrow with a comment is a mandatory transition (no condition)
+            - arrow "Q" means : a buffer was enqueued
+            - arrow "DQ" means : a buffer was dequeued
+            - "QCI: stop" means the QCI interface is not enabled
+            - "DMA: stop" means all 3 DMA channels are stopped
+            - "DMA: run" means at least 1 DMA channel is still running
 
 DMA usage
 ---------
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index 854808b67fa..d54c1e4c6a9 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -89,6 +89,11 @@ from dev (driver name followed by the bus_id, to be precise). If you set it
 up before calling v4l2_device_register then it will be untouched. If dev is
 NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register.
 
+You can use v4l2_device_set_name() to set the name based on a driver name and
+a driver-global atomic_t instance. This will generate names like ivtv0, ivtv1,
+etc. If the name ends with a digit, then it will insert a dash: cx18-0,
+cx18-1, etc. This function returns the instance number.
+
 The first 'dev' argument is normally the struct device pointer of a pci_dev,
 usb_interface or platform_device. It is rare for dev to be NULL, but it happens
 with ISA devices or when one device creates multiple PCI devices, thus making
diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile
index 6f562f778b2..27479d43a9b 100644
--- a/Documentation/vm/Makefile
+++ b/Documentation/vm/Makefile
@@ -2,7 +2,7 @@
 obj- := dummy.o
 
 # List of programs to build
-hostprogs-y := slabinfo
+hostprogs-y := slabinfo slqbinfo page-types
 
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
diff --git a/Documentation/vm/balance b/Documentation/vm/balance
index bd3d31bc491..c46e68cf934 100644
--- a/Documentation/vm/balance
+++ b/Documentation/vm/balance
@@ -75,15 +75,15 @@ Page stealing from process memory and shm is done if stealing the page would
 alleviate memory pressure on any zone in the page's node that has fallen below
 its watermark.
 
-pages_min/pages_low/pages_high/low_on_memory/zone_wake_kswapd: These are 
-per-zone fields, used to determine when a zone needs to be balanced. When
-the number of pages falls below pages_min, the hysteric field low_on_memory
-gets set. This stays set till the number of free pages becomes pages_high.
-When low_on_memory is set, page allocation requests will try to free some
-pages in the zone (providing GFP_WAIT is set in the request). Orthogonal
-to this, is the decision to poke kswapd to free some zone pages. That
-decision is not hysteresis based, and is done when the number of free
-pages is below pages_low; in which case zone_wake_kswapd is also set.
+watemark[WMARK_MIN/WMARK_LOW/WMARK_HIGH]/low_on_memory/zone_wake_kswapd: These
+are per-zone fields, used to determine when a zone needs to be balanced. When
+the number of pages falls below watermark[WMARK_MIN], the hysteric field
+low_on_memory gets set. This stays set till the number of free pages becomes
+watermark[WMARK_HIGH]. When low_on_memory is set, page allocation requests will
+try to free some pages in the zone (providing GFP_WAIT is set in the request).
+Orthogonal to this, is the decision to poke kswapd to free some zone pages.
+That decision is not hysteresis based, and is done when the number of free
+pages is below watermark[WMARK_LOW]; in which case zone_wake_kswapd is also set.
 
 
 (Good) Ideas that I have heard:
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
new file mode 100644
index 00000000000..0833f44ba16
--- /dev/null
+++ b/Documentation/vm/page-types.c
@@ -0,0 +1,698 @@
+/*
+ * page-types: Tool for querying page flags
+ *
+ * Copyright (C) 2009 Intel corporation
+ * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <string.h>
+#include <getopt.h>
+#include <limits.h>
+#include <sys/types.h>
+#include <sys/errno.h>
+#include <sys/fcntl.h>
+
+
+/*
+ * kernel page flags
+ */
+
+#define KPF_BYTES		8
+#define PROC_KPAGEFLAGS		"/proc/kpageflags"
+
+/* copied from kpageflags_read() */
+#define KPF_LOCKED		0
+#define KPF_ERROR		1
+#define KPF_REFERENCED		2
+#define KPF_UPTODATE		3
+#define KPF_DIRTY		4
+#define KPF_LRU			5
+#define KPF_ACTIVE		6
+#define KPF_SLAB		7
+#define KPF_WRITEBACK		8
+#define KPF_RECLAIM		9
+#define KPF_BUDDY		10
+
+/* [11-20] new additions in 2.6.31 */
+#define KPF_MMAP		11
+#define KPF_ANON		12
+#define KPF_SWAPCACHE		13
+#define KPF_SWAPBACKED		14
+#define KPF_COMPOUND_HEAD	15
+#define KPF_COMPOUND_TAIL	16
+#define KPF_HUGE		17
+#define KPF_UNEVICTABLE		18
+#define KPF_NOPAGE		20
+
+/* [32-] kernel hacking assistances */
+#define KPF_RESERVED		32
+#define KPF_MLOCKED		33
+#define KPF_MAPPEDTODISK	34
+#define KPF_PRIVATE		35
+#define KPF_PRIVATE_2		36
+#define KPF_OWNER_PRIVATE	37
+#define KPF_ARCH		38
+#define KPF_UNCACHED		39
+
+/* [48-] take some arbitrary free slots for expanding overloaded flags
+ * not part of kernel API
+ */
+#define KPF_READAHEAD		48
+#define KPF_SLOB_FREE		49
+#define KPF_SLUB_FROZEN		50
+#define KPF_SLUB_DEBUG		51
+
+#define KPF_ALL_BITS		((uint64_t)~0ULL)
+#define KPF_HACKERS_BITS	(0xffffULL << 32)
+#define KPF_OVERLOADED_BITS	(0xffffULL << 48)
+#define BIT(name)		(1ULL << KPF_##name)
+#define BITS_COMPOUND		(BIT(COMPOUND_HEAD) | BIT(COMPOUND_TAIL))
+
+static char *page_flag_names[] = {
+	[KPF_LOCKED]		= "L:locked",
+	[KPF_ERROR]		= "E:error",
+	[KPF_REFERENCED]	= "R:referenced",
+	[KPF_UPTODATE]		= "U:uptodate",
+	[KPF_DIRTY]		= "D:dirty",
+	[KPF_LRU]		= "l:lru",
+	[KPF_ACTIVE]		= "A:active",
+	[KPF_SLAB]		= "S:slab",
+	[KPF_WRITEBACK]		= "W:writeback",
+	[KPF_RECLAIM]		= "I:reclaim",
+	[KPF_BUDDY]		= "B:buddy",
+
+	[KPF_MMAP]		= "M:mmap",
+	[KPF_ANON]		= "a:anonymous",
+	[KPF_SWAPCACHE]		= "s:swapcache",
+	[KPF_SWAPBACKED]	= "b:swapbacked",
+	[KPF_COMPOUND_HEAD]	= "H:compound_head",
+	[KPF_COMPOUND_TAIL]	= "T:compound_tail",
+	[KPF_HUGE]		= "G:huge",
+	[KPF_UNEVICTABLE]	= "u:unevictable",
+	[KPF_NOPAGE]		= "n:nopage",
+
+	[KPF_RESERVED]		= "r:reserved",
+	[KPF_MLOCKED]		= "m:mlocked",
+	[KPF_MAPPEDTODISK]	= "d:mappedtodisk",
+	[KPF_PRIVATE]		= "P:private",
+	[KPF_PRIVATE_2]		= "p:private_2",
+	[KPF_OWNER_PRIVATE]	= "O:owner_private",
+	[KPF_ARCH]		= "h:arch",
+	[KPF_UNCACHED]		= "c:uncached",
+
+	[KPF_READAHEAD]		= "I:readahead",
+	[KPF_SLOB_FREE]		= "P:slob_free",
+	[KPF_SLUB_FROZEN]	= "A:slub_frozen",
+	[KPF_SLUB_DEBUG]	= "E:slub_debug",
+};
+
+
+/*
+ * data structures
+ */
+
+static int		opt_raw;	/* for kernel developers */
+static int		opt_list;	/* list pages (in ranges) */
+static int		opt_no_summary;	/* don't show summary */
+static pid_t		opt_pid;	/* process to walk */
+
+#define MAX_ADDR_RANGES	1024
+static int		nr_addr_ranges;
+static unsigned long	opt_offset[MAX_ADDR_RANGES];
+static unsigned long	opt_size[MAX_ADDR_RANGES];
+
+#define MAX_BIT_FILTERS	64
+static int		nr_bit_filters;
+static uint64_t		opt_mask[MAX_BIT_FILTERS];
+static uint64_t		opt_bits[MAX_BIT_FILTERS];
+
+static int		page_size;
+
+#define PAGES_BATCH	(64 << 10)	/* 64k pages */
+static int		kpageflags_fd;
+static uint64_t		kpageflags_buf[KPF_BYTES * PAGES_BATCH];
+
+#define HASH_SHIFT	13
+#define HASH_SIZE	(1 << HASH_SHIFT)
+#define HASH_MASK	(HASH_SIZE - 1)
+#define HASH_KEY(flags)	(flags & HASH_MASK)
+
+static unsigned long	total_pages;
+static unsigned long	nr_pages[HASH_SIZE];
+static uint64_t 	page_flags[HASH_SIZE];
+
+
+/*
+ * helper functions
+ */
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#define min_t(type, x, y) ({			\
+	type __min1 = (x);			\
+	type __min2 = (y);			\
+	__min1 < __min2 ? __min1 : __min2; })
+
+unsigned long pages2mb(unsigned long pages)
+{
+	return (pages * page_size) >> 20;
+}
+
+void fatal(const char *x, ...)
+{
+	va_list ap;
+
+	va_start(ap, x);
+	vfprintf(stderr, x, ap);
+	va_end(ap);
+	exit(EXIT_FAILURE);
+}
+
+
+/*
+ * page flag names
+ */
+
+char *page_flag_name(uint64_t flags)
+{
+	static char buf[65];
+	int present;
+	int i, j;
+
+	for (i = 0, j = 0; i < ARRAY_SIZE(page_flag_names); i++) {
+		present = (flags >> i) & 1;
+		if (!page_flag_names[i]) {
+			if (present)
+				fatal("unkown flag bit %d\n", i);
+			continue;
+		}
+		buf[j++] = present ? page_flag_names[i][0] : '_';
+	}
+
+	return buf;
+}
+
+char *page_flag_longname(uint64_t flags)
+{
+	static char buf[1024];
+	int i, n;
+
+	for (i = 0, n = 0; i < ARRAY_SIZE(page_flag_names); i++) {
+		if (!page_flag_names[i])
+			continue;
+		if ((flags >> i) & 1)
+			n += snprintf(buf + n, sizeof(buf) - n, "%s,",
+					page_flag_names[i] + 2);
+	}
+	if (n)
+		n--;
+	buf[n] = '\0';
+
+	return buf;
+}
+
+
+/*
+ * page list and summary
+ */
+
+void show_page_range(unsigned long offset, uint64_t flags)
+{
+	static uint64_t      flags0;
+	static unsigned long index;
+	static unsigned long count;
+
+	if (flags == flags0 && offset == index + count) {
+		count++;
+		return;
+	}
+
+	if (count)
+		printf("%lu\t%lu\t%s\n",
+				index, count, page_flag_name(flags0));
+
+	flags0 = flags;
+	index  = offset;
+	count  = 1;
+}
+
+void show_page(unsigned long offset, uint64_t flags)
+{
+	printf("%lu\t%s\n", offset, page_flag_name(flags));
+}
+
+void show_summary(void)
+{
+	int i;
+
+	printf("             flags\tpage-count       MB"
+		"  symbolic-flags\t\t\tlong-symbolic-flags\n");
+
+	for (i = 0; i < ARRAY_SIZE(nr_pages); i++) {
+		if (nr_pages[i])
+			printf("0x%016llx\t%10lu %8lu  %s\t%s\n",
+				(unsigned long long)page_flags[i],
+				nr_pages[i],
+				pages2mb(nr_pages[i]),
+				page_flag_name(page_flags[i]),
+				page_flag_longname(page_flags[i]));
+	}
+
+	printf("             total\t%10lu %8lu\n",
+			total_pages, pages2mb(total_pages));
+}
+
+
+/*
+ * page flag filters
+ */
+
+int bit_mask_ok(uint64_t flags)
+{
+	int i;
+
+	for (i = 0; i < nr_bit_filters; i++) {
+		if (opt_bits[i] == KPF_ALL_BITS) {
+			if ((flags & opt_mask[i]) == 0)
+				return 0;
+		} else {
+			if ((flags & opt_mask[i]) != opt_bits[i])
+				return 0;
+		}
+	}
+
+	return 1;
+}
+
+uint64_t expand_overloaded_flags(uint64_t flags)
+{
+	/* SLOB/SLUB overload several page flags */
+	if (flags & BIT(SLAB)) {
+		if (flags & BIT(PRIVATE))
+			flags ^= BIT(PRIVATE) | BIT(SLOB_FREE);
+		if (flags & BIT(ACTIVE))
+			flags ^= BIT(ACTIVE) | BIT(SLUB_FROZEN);
+		if (flags & BIT(ERROR))
+			flags ^= BIT(ERROR) | BIT(SLUB_DEBUG);
+	}
+
+	/* PG_reclaim is overloaded as PG_readahead in the read path */
+	if ((flags & (BIT(RECLAIM) | BIT(WRITEBACK))) == BIT(RECLAIM))
+		flags ^= BIT(RECLAIM) | BIT(READAHEAD);
+
+	return flags;
+}
+
+uint64_t well_known_flags(uint64_t flags)
+{
+	/* hide flags intended only for kernel hacker */
+	flags &= ~KPF_HACKERS_BITS;
+
+	/* hide non-hugeTLB compound pages */
+	if ((flags & BITS_COMPOUND) && !(flags & BIT(HUGE)))
+		flags &= ~BITS_COMPOUND;
+
+	return flags;
+}
+
+
+/*
+ * page frame walker
+ */
+
+int hash_slot(uint64_t flags)
+{
+	int k = HASH_KEY(flags);
+	int i;
+
+	/* Explicitly reserve slot 0 for flags 0: the following logic
+	 * cannot distinguish an unoccupied slot from slot (flags==0).
+	 */
+	if (flags == 0)
+		return 0;
+
+	/* search through the remaining (HASH_SIZE-1) slots */
+	for (i = 1; i < ARRAY_SIZE(page_flags); i++, k++) {
+		if (!k || k >= ARRAY_SIZE(page_flags))
+			k = 1;
+		if (page_flags[k] == 0) {
+			page_flags[k] = flags;
+			return k;
+		}
+		if (page_flags[k] == flags)
+			return k;
+	}
+
+	fatal("hash table full: bump up HASH_SHIFT?\n");
+	exit(EXIT_FAILURE);
+}
+
+void add_page(unsigned long offset, uint64_t flags)
+{
+	flags = expand_overloaded_flags(flags);
+
+	if (!opt_raw)
+		flags = well_known_flags(flags);
+
+	if (!bit_mask_ok(flags))
+		return;
+
+	if (opt_list == 1)
+		show_page_range(offset, flags);
+	else if (opt_list == 2)
+		show_page(offset, flags);
+
+	nr_pages[hash_slot(flags)]++;
+	total_pages++;
+}
+
+void walk_pfn(unsigned long index, unsigned long count)
+{
+	unsigned long batch;
+	unsigned long n;
+	unsigned long i;
+
+	if (index > ULONG_MAX / KPF_BYTES)
+		fatal("index overflow: %lu\n", index);
+
+	lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
+
+	while (count) {
+		batch = min_t(unsigned long, count, PAGES_BATCH);
+		n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
+		if (n == 0)
+			break;
+		if (n < 0) {
+			perror(PROC_KPAGEFLAGS);
+			exit(EXIT_FAILURE);
+		}
+
+		if (n % KPF_BYTES != 0)
+			fatal("partial read: %lu bytes\n", n);
+		n = n / KPF_BYTES;
+
+		for (i = 0; i < n; i++)
+			add_page(index + i, kpageflags_buf[i]);
+
+		index += batch;
+		count -= batch;
+	}
+}
+
+void walk_addr_ranges(void)
+{
+	int i;
+
+	kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
+	if (kpageflags_fd < 0) {
+		perror(PROC_KPAGEFLAGS);
+		exit(EXIT_FAILURE);
+	}
+
+	if (!nr_addr_ranges)
+		walk_pfn(0, ULONG_MAX);
+
+	for (i = 0; i < nr_addr_ranges; i++)
+		walk_pfn(opt_offset[i], opt_size[i]);
+
+	close(kpageflags_fd);
+}
+
+
+/*
+ * user interface
+ */
+
+const char *page_flag_type(uint64_t flag)
+{
+	if (flag & KPF_HACKERS_BITS)
+		return "(r)";
+	if (flag & KPF_OVERLOADED_BITS)
+		return "(o)";
+	return "   ";
+}
+
+void usage(void)
+{
+	int i, j;
+
+	printf(
+"page-types [options]\n"
+"            -r|--raw                  Raw mode, for kernel developers\n"
+"            -a|--addr    addr-spec    Walk a range of pages\n"
+"            -b|--bits    bits-spec    Walk pages with specified bits\n"
+#if 0 /* planned features */
+"            -p|--pid     pid          Walk process address space\n"
+"            -f|--file    filename     Walk file address space\n"
+#endif
+"            -l|--list                 Show page details in ranges\n"
+"            -L|--list-each            Show page details one by one\n"
+"            -N|--no-summary           Don't show summay info\n"
+"            -h|--help                 Show this usage message\n"
+"addr-spec:\n"
+"            N                         one page at offset N (unit: pages)\n"
+"            N+M                       pages range from N to N+M-1\n"
+"            N,M                       pages range from N to M-1\n"
+"            N,                        pages range from N to end\n"
+"            ,M                        pages range from 0 to M\n"
+"bits-spec:\n"
+"            bit1,bit2                 (flags & (bit1|bit2)) != 0\n"
+"            bit1,bit2=bit1            (flags & (bit1|bit2)) == bit1\n"
+"            bit1,~bit2                (flags & (bit1|bit2)) == bit1\n"
+"            =bit1,bit2                flags == (bit1|bit2)\n"
+"bit-names:\n"
+	);
+
+	for (i = 0, j = 0; i < ARRAY_SIZE(page_flag_names); i++) {
+		if (!page_flag_names[i])
+			continue;
+		printf("%16s%s", page_flag_names[i] + 2,
+				 page_flag_type(1ULL << i));
+		if (++j > 3) {
+			j = 0;
+			putchar('\n');
+		}
+	}
+	printf("\n                                   "
+		"(r) raw mode bits  (o) overloaded bits\n");
+}
+
+unsigned long long parse_number(const char *str)
+{
+	unsigned long long n;
+
+	n = strtoll(str, NULL, 0);
+
+	if (n == 0 && str[0] != '0')
+		fatal("invalid name or number: %s\n", str);
+
+	return n;
+}
+
+void parse_pid(const char *str)
+{
+	opt_pid = parse_number(str);
+}
+
+void parse_file(const char *name)
+{
+}
+
+void add_addr_range(unsigned long offset, unsigned long size)
+{
+	if (nr_addr_ranges >= MAX_ADDR_RANGES)
+		fatal("too much addr ranges\n");
+
+	opt_offset[nr_addr_ranges] = offset;
+	opt_size[nr_addr_ranges] = size;
+	nr_addr_ranges++;
+}
+
+void parse_addr_range(const char *optarg)
+{
+	unsigned long offset;
+	unsigned long size;
+	char *p;
+
+	p = strchr(optarg, ',');
+	if (!p)
+		p = strchr(optarg, '+');
+
+	if (p == optarg) {
+		offset = 0;
+		size   = parse_number(p + 1);
+	} else if (p) {
+		offset = parse_number(optarg);
+		if (p[1] == '\0')
+			size = ULONG_MAX;
+		else {
+			size = parse_number(p + 1);
+			if (*p == ',') {
+				if (size < offset)
+					fatal("invalid range: %lu,%lu\n",
+							offset, size);
+				size -= offset;
+			}
+		}
+	} else {
+		offset = parse_number(optarg);
+		size   = 1;
+	}
+
+	add_addr_range(offset, size);
+}
+
+void add_bits_filter(uint64_t mask, uint64_t bits)
+{
+	if (nr_bit_filters >= MAX_BIT_FILTERS)
+		fatal("too much bit filters\n");
+
+	opt_mask[nr_bit_filters] = mask;
+	opt_bits[nr_bit_filters] = bits;
+	nr_bit_filters++;
+}
+
+uint64_t parse_flag_name(const char *str, int len)
+{
+	int i;
+
+	if (!*str || !len)
+		return 0;
+
+	if (len <= 8 && !strncmp(str, "compound", len))
+		return BITS_COMPOUND;
+
+	for (i = 0; i < ARRAY_SIZE(page_flag_names); i++) {
+		if (!page_flag_names[i])
+			continue;
+		if (!strncmp(str, page_flag_names[i] + 2, len))
+			return 1ULL << i;
+	}
+
+	return parse_number(str);
+}
+
+uint64_t parse_flag_names(const char *str, int all)
+{
+	const char *p    = str;
+	uint64_t   flags = 0;
+
+	while (1) {
+		if (*p == ',' || *p == '=' || *p == '\0') {
+			if ((*str != '~') || (*str == '~' && all && *++str))
+				flags |= parse_flag_name(str, p - str);
+			if (*p != ',')
+				break;
+			str = p + 1;
+		}
+		p++;
+	}
+
+	return flags;
+}
+
+void parse_bits_mask(const char *optarg)
+{
+	uint64_t mask;
+	uint64_t bits;
+	const char *p;
+
+	p = strchr(optarg, '=');
+	if (p == optarg) {
+		mask = KPF_ALL_BITS;
+		bits = parse_flag_names(p + 1, 0);
+	} else if (p) {
+		mask = parse_flag_names(optarg, 0);
+		bits = parse_flag_names(p + 1, 0);
+	} else if (strchr(optarg, '~')) {
+		mask = parse_flag_names(optarg, 1);
+		bits = parse_flag_names(optarg, 0);
+	} else {
+		mask = parse_flag_names(optarg, 0);
+		bits = KPF_ALL_BITS;
+	}
+
+	add_bits_filter(mask, bits);
+}
+
+
+struct option opts[] = {
+	{ "raw"       , 0, NULL, 'r' },
+	{ "pid"       , 1, NULL, 'p' },
+	{ "file"      , 1, NULL, 'f' },
+	{ "addr"      , 1, NULL, 'a' },
+	{ "bits"      , 1, NULL, 'b' },
+	{ "list"      , 0, NULL, 'l' },
+	{ "list-each" , 0, NULL, 'L' },
+	{ "no-summary", 0, NULL, 'N' },
+	{ "help"      , 0, NULL, 'h' },
+	{ NULL        , 0, NULL, 0 }
+};
+
+int main(int argc, char *argv[])
+{
+	int c;
+
+	page_size = getpagesize();
+
+	while ((c = getopt_long(argc, argv,
+				"rp:f:a:b:lLNh", opts, NULL)) != -1) {
+		switch (c) {
+		case 'r':
+			opt_raw = 1;
+			break;
+		case 'p':
+			parse_pid(optarg);
+			break;
+		case 'f':
+			parse_file(optarg);
+			break;
+		case 'a':
+			parse_addr_range(optarg);
+			break;
+		case 'b':
+			parse_bits_mask(optarg);
+			break;
+		case 'l':
+			opt_list = 1;
+			break;
+		case 'L':
+			opt_list = 2;
+			break;
+		case 'N':
+			opt_no_summary = 1;
+			break;
+		case 'h':
+			usage();
+			exit(0);
+		default:
+			usage();
+			exit(1);
+		}
+	}
+
+	if (opt_list == 1)
+		printf("offset\tcount\tflags\n");
+	if (opt_list == 2)
+		printf("offset\tflags\n");
+
+	walk_addr_ranges();
+
+	if (opt_list == 1)
+		show_page_range(0, 0);  /* drain the buffer */
+
+	if (opt_no_summary)
+		return 0;
+
+	if (opt_list)
+		printf("\n\n");
+
+	show_summary();
+
+	return 0;
+}
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
index ce72c0fe617..600a304a828 100644
--- a/Documentation/vm/pagemap.txt
+++ b/Documentation/vm/pagemap.txt
@@ -12,9 +12,9 @@ There are three components to pagemap:
    value for each virtual page, containing the following data (from
    fs/proc/task_mmu.c, above pagemap_read):
 
-    * Bits 0-55  page frame number (PFN) if present
+    * Bits 0-54  page frame number (PFN) if present
     * Bits 0-4   swap type if swapped
-    * Bits 5-55  swap offset if swapped
+    * Bits 5-54  swap offset if swapped
     * Bits 55-60 page shift (page size = 1<<page shift)
     * Bit  61    reserved for future use
     * Bit  62    page swapped
@@ -36,7 +36,7 @@ There are three components to pagemap:
  * /proc/kpageflags.  This file contains a 64-bit set of flags for each
    page, indexed by PFN.
 
-   The flags are (from fs/proc/proc_misc, above kpageflags_read):
+   The flags are (from fs/proc/page.c, above kpageflags_read):
 
      0. LOCKED
      1. ERROR
@@ -49,6 +49,68 @@ There are three components to pagemap:
      8. WRITEBACK
      9. RECLAIM
     10. BUDDY
+    11. MMAP
+    12. ANON
+    13. SWAPCACHE
+    14. SWAPBACKED
+    15. COMPOUND_HEAD
+    16. COMPOUND_TAIL
+    16. HUGE
+    18. UNEVICTABLE
+    20. NOPAGE
+
+Short descriptions to the page flags:
+
+ 0. LOCKED
+    page is being locked for exclusive access, eg. by undergoing read/write IO
+
+ 7. SLAB
+    page is managed by the SLAB/SLOB/SLUB/SLQB kernel memory allocator
+    When compound page is used, SLUB/SLQB will only set this flag on the head
+    page; SLOB will not flag it at all.
+
+10. BUDDY
+    a free memory block managed by the buddy system allocator
+    The buddy system organizes free memory in blocks of various orders.
+    An order N block has 2^N physically contiguous pages, with the BUDDY flag
+    set for and _only_ for the first page.
+
+15. COMPOUND_HEAD
+16. COMPOUND_TAIL
+    A compound page with order N consists of 2^N physically contiguous pages.
+    A compound page with order 2 takes the form of "HTTT", where H donates its
+    head page and T donates its tail page(s).  The major consumers of compound
+    pages are hugeTLB pages (Documentation/vm/hugetlbpage.txt), the SLUB etc.
+    memory allocators and various device drivers. However in this interface,
+    only huge/giga pages are made visible to end users.
+17. HUGE
+    this is an integral part of a HugeTLB page
+
+20. NOPAGE
+    no page frame exists at the requested address
+
+    [IO related page flags]
+ 1. ERROR     IO error occurred
+ 3. UPTODATE  page has up-to-date data
+              ie. for file backed page: (in-memory data revision >= on-disk one)
+ 4. DIRTY     page has been written to, hence contains new data
+              ie. for file backed page: (in-memory data revision >  on-disk one)
+ 8. WRITEBACK page is being synced to disk
+
+    [LRU related page flags]
+ 5. LRU         page is in one of the LRU lists
+ 6. ACTIVE      page is in the active LRU list
+18. UNEVICTABLE page is in the unevictable (non-)LRU list
+                It is somehow pinned and not a candidate for LRU page reclaims,
+		eg. ramfs pages, shmctl(SHM_LOCK) and mlock() memory segments
+ 2. REFERENCED  page has been referenced since last LRU list enqueue/requeue
+ 9. RECLAIM     page will be reclaimed soon after its pageout IO completed
+11. MMAP        a memory mapped page
+12. ANON        a memory mapped page that is not part of a file
+13. SWAPCACHE   page is mapped to swap space, ie. has an associated swap entry
+14. SWAPBACKED  page is backed by swap/RAM
+
+The page-types tool in this directory can be used to query the above flags.
 
 Using pagemap to do something useful:
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 90f81283b72..fb94addb34d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -36,6 +36,12 @@ trivial patch so apply some common sense.
 	(scripts/checkpatch.pl) to catch trival style violations.
 	See Documentation/CodingStyle for guidance here.
 
+	PLEASE CC: the maintainers and mailing lists that are generated
+	by scripts/get_maintainer.pl.  The results returned by the
+	script will be best if you have git installed and are making
+	your changes in a branch derived from Linus' latest git tree.
+	See Documentation/SubmittingPatches for details.
+
 	PLEASE try to include any credit lines you want added with the
 	patch. It avoids people being missed off by mistake and makes
 	it easier to know who wants adding and who doesn't.
@@ -157,9 +163,10 @@ S:	Maintained
 F:	drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
+P:	Alan Cox
+M:	alan@lxorguk.ukuu.org.uk
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-M:	alan@lxorguk.ukuu.org.uk
 S:	Odd Fixes
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
@@ -488,7 +495,7 @@ AOA (Apple Onboard Audio) ALSA DRIVER
 P:	Johannes Berg
 M:	johannes@sipsolutions.net
 L:	linuxppc-dev@ozlabs.org
-L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/aoa/
 
@@ -681,6 +688,13 @@ M:	sakoman@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
+P:	Philipp Zabel
+M:	philipp.zabel@gmail.com
+S:	Maintained
+F:	arch/arm/mach-pxa/hx4700.c
+F:	arch/arm/mach-pxa/include/mach/hx4700.h
+
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 P:	Kristoffer Ericson
 M:	kristoffer.ericson@gmail.com
@@ -904,7 +918,6 @@ P:	Dan Williams
 M:	dan.j.williams@intel.com
 P:	Maciej Sosnowski
 M:	maciej.sosnowski@intel.com
-L:	linux-kernel@vger.kernel.org
 W:	http://sourceforge.net/projects/xscaleiop
 S:	Supported
 F:	Documentation/crypto/async-tx-api.txt
@@ -940,6 +953,12 @@ P:	Luis R. Rodriguez
 M:	lrodriguez@atheros.com
 P:	Jouni Malinen
 M:	jmalinen@atheros.com
+P:	Sujith Manoharan
+M:	Sujith.Manoharan@atheros.com
+P:	Vasanthakumar Thiagarajan
+M:	vasanth@atheros.com
+P:	Senthil Balasubramanian
+M:	senthilkumar@atheros.com
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 S:	Supported
@@ -994,7 +1013,6 @@ F:	drivers/mmc/host/at91_mci.c
 ATMEL AT91 / AT32 SERIAL DRIVER
 P:	Haavard Skinnemoen
 M:	hskinnemoen@atmel.com
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
@@ -1050,7 +1068,6 @@ F:	kernel/audit*
 AUXILIARY DISPLAY DRIVERS
 P:	Miguel Ojeda Sandonis
 M:	miguel.ojeda.sandonis@gmail.com
-L:	linux-kernel@vger.kernel.org
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1120,7 +1137,6 @@ F:	drivers/net/hamradio/baycom*
 BEFS FILE SYSTEM
 P:	Sergey S. Kostyliov
 M:	rathamahata@php4.ru
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/befs.txt
 F:	fs/befs/
@@ -1128,7 +1144,6 @@ F:	fs/befs/
 BFS FILE SYSTEM
 P:	Tigran A. Aivazian
 M:	tigran@aivazian.fsnet.co.uk
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/bfs.txt
 F:	fs/bfs/
@@ -1185,7 +1200,6 @@ F:	drivers/i2c/busses/i2c-bfin-twi.c
 BLOCK LAYER
 P:	Jens Axboe
 M:	axboe@kernel.dk
-L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
 S:	Maintained
 F:	block/
@@ -1312,7 +1326,6 @@ P:	Muli Ben-Yehuda
 M:	muli@il.ibm.com
 P:	Jon D. Mason
 M:	jdmason@kudzu.us
-L:	linux-kernel@vger.kernel.org
 L:	discuss@x86-64.org
 S:	Maintained
 F:	arch/x86/kernel/pci-calgary_64.c
@@ -1332,6 +1345,13 @@ F:	drivers/net/can/
 F:	include/linux/can/
 F:	include/linux/can.h
 
+CAN NETWORK DRIVERS
+P:	Wolfgang Grandegger
+M:	wg@grandegger.com
+L:	socketcan-core@lists.berlios.de (subscribers-only)
+W:	http://developer.berlios.de/projects/socketcan/
+S:	Maintained
+
 CELL BROADBAND ENGINE ARCHITECTURE
 P:	Arnd Bergmann
 M:	arnd@arndb.de
@@ -1357,7 +1377,6 @@ F:	include/linux/usb/wusb*
 CFAG12864B LCD DRIVER
 P:	Miguel Ojeda Sandonis
 M:	miguel.ojeda.sandonis@gmail.com
-L:	linux-kernel@vger.kernel.org
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1367,7 +1386,6 @@ F:	include/linux/cfag12864b.h
 CFAG12864BFB LCD FRAMEBUFFER DRIVER
 P:	Miguel Ojeda Sandonis
 M:	miguel.ojeda.sandonis@gmail.com
-L:	linux-kernel@vger.kernel.org
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1387,7 +1405,6 @@ X:	net/wireless/wext*
 CHECKPATCH
 P:	Andy Whitcroft
 M:	apw@canonical.com
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	scripts/checkpatch.pl
 
@@ -1416,7 +1433,7 @@ F:	drivers/usb/host/ohci-ep93xx.c
 CIRRUS LOGIC CS4270 SOUND DRIVER
 P:	Timur Tabi
 M:	timur@freescale.com
-L:	alsa-devel@alsa-project.org
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/codecs/cs4270*
 
@@ -1441,6 +1458,7 @@ P:	Joe Eykholt
 M:	jeykholt@cisco.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
+F:	drivers/scsi/fnic/
 
 CODA FILE SYSTEM
 P:	Jan Harkes
@@ -1513,7 +1531,6 @@ F:	drivers/usb/atm/cxacru.c
 CONFIGFS
 P:	Joel Becker
 M:	joel.becker@oracle.com
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	fs/configfs/
 F:	include/linux/configfs.h
@@ -1571,7 +1588,6 @@ F:	arch/x86/kernel/msr.c
 CPUSETS
 P:	Paul Menage
 M:	menage@google.com
-L:	linux-kernel@vger.kernel.org
 W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
 S:	Supported
@@ -1778,7 +1794,6 @@ DEVICE NUMBER REGISTRY
 P:	Torben Mathiasen
 M:	device@lanana.org
 W:	http://lanana.org/docs/device-list/index.html
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 DEVICE-MAPPER  (LVM)
@@ -1804,7 +1819,6 @@ F:	drivers/char/digi*
 DIRECTORY NOTIFICATION (DNOTIFY)
 P:	Eric Paris
 M:	eparis@parisplace.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/dnotify.txt
 F:	fs/notify/dnotify/
@@ -1821,7 +1835,6 @@ S:	Maintained
 DISKQUOTA
 P:	Jan Kara
 M:	jack@suse.cz
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
@@ -1843,7 +1856,6 @@ P:	Maciej Sosnowski
 M:	maciej.sosnowski@intel.com
 P:	Dan Williams
 M:	dan.j.williams@intel.com
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/dma/
 F:	include/linux/dma*
@@ -1895,7 +1907,6 @@ F:	drivers/scsi/dpt/
 DRIVER CORE, KOBJECTS, AND SYSFS
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:	linux-kernel@vger.kernel.org
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 F:	Documentation/kobject.txt
@@ -1961,8 +1972,8 @@ F:	net/bridge/netfilter/ebt*.c
 ECRYPT FILE SYSTEM
 P:	Tyler Hicks
 M:	tyhicks@linux.vnet.ibm.com
-M:	Dustin Kirkland
-P:	kirkland@canonical.com
+P:	Dustin Kirkland
+M:	kirkland@canonical.com
 L:	ecryptfs-devel@lists.launchpad.net
 W:	https://launchpad.net/ecryptfs
 S:	Supported
@@ -2105,6 +2116,15 @@ W:	http://sourceforge.net/projects/lpfcxxxx
 S:	Supported
 F:	drivers/scsi/lpfc/
 
+ENE CB710 FLASH CARD READER DRIVER
+P:	Michał Mirosław
+M:	mirq-linux@rere.qmqm.pl
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/misc/cb710/
+F:	drivers/mmc/host/cb710-mmc.*
+F:	include/linux/cb710.h
+
 EPSON 1355 FRAMEBUFFER DRIVER
 P:	Christopher Hoover
 M:	ch@murgatroid.com
@@ -2233,7 +2253,6 @@ F:	drivers/firewire/
 F:	include/linux/firewire*.h
 
 FIRMWARE LOADER (request_firmware)
-L:	linux-kernel@vger.kernel.org
 S:	Orphan
 F:	Documentation/firmware_class/
 F:	drivers/base/firmware*.c
@@ -2270,7 +2289,6 @@ M:	leoli@freescale.com
 P:	Zhang Wei
 M:	zw@zh-kernel.org
 L:	linuxppc-dev@ozlabs.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
@@ -2336,7 +2354,7 @@ F:	drivers/serial/ucc_uart.c
 FREESCALE SOC SOUND DRIVERS
 P:	Timur Tabi
 M:	timur@freescale.com
-L:	alsa-devel@alsa-project.org
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 F:	sound/soc/fsl/fsl*
@@ -2351,7 +2369,7 @@ F:	fs/freevxfs/
 
 FREEZER
 P:	Pavel Machek
-M:	pavel@suse.cz
+M:	pavel@ucw.cz
 P:	Rafael J. Wysocki
 M:	rjw@sisk.pl
 L:	linux-pm@lists.linux-foundation.org
@@ -2470,7 +2488,6 @@ F:	drivers/hwmon/hdaps.c
 
 HYPERVISOR VIRTUAL CONSOLE DRIVER
 L:	linuxppc-dev@ozlabs.org
-L:	linux-kernel@vger.kernel.org
 S:	Odd Fixes
 F:	drivers/char/hvc_*
 
@@ -2537,7 +2554,6 @@ F:	sound/parisc/harmony.*
 HAYES ESP SERIAL DRIVER
 P:	Andrew J. Robinson
 M:	arobinso@nyx.net
-L:	linux-kernel@vger.kernel.org
 W:	http://www.nyx.net/~arobinso
 S:	Maintained
 F:	Documentation/serial/hayes-esp.txt
@@ -2563,7 +2579,6 @@ F:	include/linux/cciss_ioctl.h
 HFS FILESYSTEM
 P:	Roman Zippel
 M:	zippel@linux-m68k.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/hfs.txt
 F:	fs/hfs/
@@ -2603,7 +2618,6 @@ F:	include/linux/hid*
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
 P:	Thomas Gleixner
 M:	tglx@linutronix.de
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
@@ -2742,7 +2756,6 @@ F:	drivers/i2c/busses/i2c-tiny-usb.c
 i386 BOOT CODE
 P:	H. Peter Anvin
 M:	hpa@zytor.com
-L:	Linux-Kernel@vger.kernel.org
 S:	Maintained
 F:	arch/x86/boot/
 
@@ -2827,6 +2840,18 @@ L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/ieee1394/raw1394*
 
+IEEE 802.15.4 SUBSYSTEM
+P:	Dmitry Eremin-Solenikov
+M:	dbaryshkov@gmail.com
+P:	Sergey Lapin
+M:	slapin@ossfans.org
+L:	linux-zigbee-devel@lists.sourceforge.net
+W:	http://apps.sourceforge.net/trac/linux-zigbee
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
+S:	Maintained
+F:	net/ieee802154/
+F:	drivers/ieee801254/
+
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 P:	Mimi Zohar
 M:	zohar@us.ibm.com
@@ -2860,7 +2885,6 @@ P:	Robert Love
 M:	rlove@rlove.org
 P:	Eric Paris
 M:	eparis@parisplace.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/inotify.txt
 F:	fs/notify/inotify/
@@ -2908,7 +2932,6 @@ F:	arch/x86/kernel/microcode_intel.c
 INTEL I/OAT DMA DRIVER
 P:	Maciej Sosnowski
 M:	maciej.sosnowski@intel.com
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/dma/ioat*
 
@@ -2924,7 +2947,6 @@ F:	include/linux/intel-iommu.h
 INTEL IOP-ADMA DMA DRIVER
 P:	Dan Williams
 M:	dan.j.williams@intel.com
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/dma/iop-adma.c
 
@@ -3120,6 +3142,7 @@ M:	samuel@sortiz.org
 L:	irda-users@lists.sourceforge.net (subscribers-only)
 W:	http://irda.sourceforge.net/
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/irda-2.6.git
 F:	Documentation/networking/irda.txt
 F:	drivers/net/irda/
 F:	include/net/irda/
@@ -3236,7 +3259,6 @@ M:	vgoyal@redhat.com
 P:	Haren Myneni
 M:	hbabu@us.ibm.com
 L:	kexec@lists.infradead.org
-L:	linux-kernel@vger.kernel.org
 W:	http://lse.sourceforge.net/kdump/
 S:	Maintained
 F:	Documentation/kdump/
@@ -3346,7 +3368,6 @@ KEXEC
 P:	Eric Biederman
 M:	ebiederm@xmission.com
 W:	http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
-L:	linux-kernel@vger.kernel.org
 L:	kexec@lists.infradead.org
 S:	Maintained
 F:	include/linux/kexec.h
@@ -3363,6 +3384,14 @@ F:	drivers/serial/kgdboc.c
 F:	include/linux/kgdb.h
 F:	kernel/kgdb.c
 
+KMEMCHECK
+P:	Vegard Nossum
+M:	vegardno@ifi.uio.no
+P	Pekka Enberg
+M:	penberg@cs.helsinki.fi
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 KMEMLEAK
 P:	Catalin Marinas
 M:	catalin.marinas@arm.com
@@ -3376,7 +3405,6 @@ F:	mm/kmemleak-test.c
 KMEMTRACE
 P:	Eduard - Gabriel Munteanu
 M:	eduard.munteanu@linux360.ro
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/trace/kmemtrace.txt
 F:	include/trace/kmemtrace.h
@@ -3391,7 +3419,6 @@ P:	David S. Miller
 M:	davem@davemloft.net
 P:	Masami Hiramatsu
 M:	mhiramat@redhat.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
@@ -3400,7 +3427,6 @@ F:	kernel/kprobes.c
 KS0108 LCD CONTROLLER DRIVER
 P:	Miguel Ojeda Sandonis
 M:	miguel.ojeda.sandonis@gmail.com
-L:	linux-kernel@vger.kernel.org
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -3564,7 +3590,6 @@ P:	Peter Zijlstra
 M:	peterz@infradead.org
 P:	Ingo Molnar
 M:	mingo@redhat.com
-L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
 S:	Maintained
 F:	Documentation/lockdep*.txt
@@ -3616,7 +3641,6 @@ L:	linux-m32r-ja@ml.linux-m32r.org (in Japanese)
 W:	http://www.linux-m32r.org/
 S:	Maintained
 F:	arch/m32r/
-F:	include/asm-m32r/
 
 M68K ARCHITECTURE
 P:	Geert Uytterhoeven
@@ -3700,7 +3724,6 @@ F:	include/linux/mv643xx.h
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
 P:	Nicolas Pitre
 M:	nico@cam.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 MARVELL YUKON / SYSKONNECT DRIVER
@@ -3754,7 +3777,6 @@ F:	drivers/scsi/megaraid/
 
 MEMORY MANAGEMENT
 L:	linux-mm@kvack.org
-L:	linux-kernel@vger.kernel.org
 W:	http://www.linux-mm.org
 S:	Maintained
 F:	include/linux/mm.h
@@ -3768,7 +3790,6 @@ M:	xemul@openvz.org
 P:	KAMEZAWA Hiroyuki
 M:	kamezawa.hiroyu@jp.fujitsu.com
 L:	linux-mm@kvack.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	mm/memcontrol.c
 
@@ -3811,7 +3832,6 @@ F:	arch/mips/
 MISCELLANEOUS MCA-SUPPORT
 P:	James Bottomley
 M:	James.Bottomley@HansenPartnership.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/ia64/mca.txt
 F:	Documentation/mca.txt
@@ -3821,7 +3841,6 @@ F:	include/linux/mca*
 MODULE SUPPORT
 P:	Rusty Russell
 M:	rusty@rustcorp.com.au
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	include/linux/module.h
 F:	kernel/module.c
@@ -3845,7 +3864,6 @@ F:	drivers/mmc/host/imxmmc.*
 MOUSE AND MISC DEVICES [GENERAL]
 P:	Alessandro Rubini
 M:	rubini@ipvvis.unipv.it
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/input/mouse/
 F:	include/linux/gpio_mouse.h
@@ -3853,7 +3871,6 @@ F:	include/linux/gpio_mouse.h
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
 P:	Jiri Slaby
 M:	jirislaby@gmail.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
@@ -3869,7 +3886,6 @@ F:	drivers/platform/x86/msi-laptop.c
 MULTIFUNCTION DEVICES (MFD)
 P:	Samuel Ortiz
 M:	sameo@linux.intel.com
-L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
 S:	Supported
 F:	drivers/mfd/
@@ -3877,7 +3893,6 @@ F:	drivers/mfd/
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
 P:	Pierre Ossman
 M:	pierre@ossman.eu
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
@@ -3885,7 +3900,6 @@ F:	include/linux/mmc/
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:	linux-kernel@vger.kernel.org
 S:	Odd Fixes
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
@@ -3900,7 +3914,6 @@ F:	sound/oss/msnd*
 MULTITECH MULTIPORT CARD (ISICOM)
 P:	Jiri Slaby
 M:	jirislaby@gmail.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/char/isicom.c
 F:	include/linux/isicom.h
@@ -4144,7 +4157,6 @@ NTFS FILESYSTEM
 P:	Anton Altaparmakov
 M:	aia21@cantab.net
 L:	linux-ntfs-dev@lists.sourceforge.net
-L:	linux-kernel@vger.kernel.org
 W:	http://www.linux-ntfs.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
 S:	Maintained
@@ -4159,6 +4171,69 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+OMAP SUPPORT
+P:	Tony Lindgren <tony@atomide.com>
+M:	tony@atomide.com
+L:	linux-omap@vger.kernel.org
+W:	http://www.muru.com/linux/omap/
+W:	http://linux.omap.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S:	Maintained
+F:	arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P:	Paul Walmsley
+M:	paul@pwsan.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P:	Kevin Hilman
+M:	khilman@deeprootsystems.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P:	Jarkko Nikula
+M:	jhnikula@gmail.com
+L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P:	Imre Deak
+M:	imre.deak@nokia.com
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/video/omap/
+
+OMAP MMC SUPPORT
+P:	Jarkko Lavinen
+M:	jarkko.lavinen@nokia.com
+L:	linux-kernel@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P:	Deepak Saxena
+M:	dsaxena@plexity.net
+S:	Maintained
+F:	drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+
 OMFS FILESYSTEM
 P:	Bob Copeland
 M:	me@bobcopeland.com
@@ -4315,7 +4390,6 @@ M:	akataria@vmware.com
 P:	Rusty Russell
 M:	rusty@rustcorp.com.au
 L:	virtualization@lists.osdl.org
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	Documentation/ia64/paravirt_ops.txt
 F:	arch/*/kernel/paravirt*
@@ -4366,7 +4440,6 @@ F:	include/linux/leds-pca9532.h
 PCI ERROR RECOVERY
 P:	Linas Vepstas
 M:	linas@austin.ibm.com
-L:	linux-kernel@vger.kernel.org
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.txt
@@ -4375,7 +4448,6 @@ F:	Documentation/powerpc/eeh-pci-error-recovery.txt
 PCI SUBSYSTEM
 P:	Jesse Barnes
 M:	jbarnes@virtuousgeek.org
-L:	linux-kernel@vger.kernel.org
 L:	linux-pci@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported
@@ -4410,7 +4482,6 @@ F:	drivers/net/pcnet32.c
 PER-TASK DELAY ACCOUNTING
 P:	Balbir Singh
 M:	balbir@linux.vnet.ibm.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	include/linux/delayacct.h
 F:	kernel/delayacct.c
@@ -4442,7 +4513,6 @@ F:	drivers/mtd/devices/phram.c
 PKTCDVD DRIVER
 P:	Peter Osterlund
 M:	petero2@telia.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
@@ -4450,7 +4520,6 @@ F:	include/linux/pktcdvd.h
 POSIX CLOCKS and TIMERS
 P:	Thomas Gleixner
 M:	tglx@linutronix.de
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	fs/timerfd.c
 F:	include/linux/timer*
@@ -4461,7 +4530,6 @@ P:	Anton Vorontsov
 M:	cbou@mail.ru
 P:	David Woodhouse
 M:	dwmw2@infradead.org
-L:	linux-kernel@vger.kernel.org
 T:	git git://git.infradead.org/battery-2.6.git
 S:	Maintained
 F:	include/linux/power_supply.h
@@ -4513,7 +4581,6 @@ F:	include/linux/if_pppol2tp.h
 PREEMPTIBLE KERNEL
 P:	Robert Love
 M:	rml@tech9.net
-L:	linux-kernel@vger.kernel.org
 L:	kpreempt-tech@lists.sourceforge.net
 W:	ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
 S:	Supported
@@ -4542,8 +4609,8 @@ S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-P:	Masakazu Mokuno
-M:	mokuno@sm.sony.co.jp
+P:	Geoff Levand
+M:	geoffrey.levand@am.sony.com
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
@@ -4576,7 +4643,6 @@ P:	Roland McGrath
 M:	roland@redhat.com
 P:	Oleg Nesterov
 M:	oleg@redhat.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	include/asm-generic/syscall.h
 F:	include/linux/ptrace.h
@@ -4597,7 +4663,7 @@ F:	drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Russell King
 M:	linux@arm.linux.org.uk
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
@@ -4612,19 +4678,19 @@ F:	sound/soc/pxa
 
 PXA168 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 P:	Jason Chagas
 M:	jason.chagas@marvell.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA910 SUPPORT
 P:	Eric Miao
-M:	eric.miao@marvell.com
+M:	eric.y.miao@gmail.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S:	Supported
+S:	Maintained
 
 PXA MMCI DRIVER
 S:	Orphan
@@ -4662,7 +4728,6 @@ F:	drivers/net/qlge/
 QNX4 FILESYSTEM
 P:	Anders Larsen
 M:	al@alarsen.net
-L:	linux-kernel@vger.kernel.org
 W:	http://www.alarsen.net/linux/qnx4fs/
 S:	Maintained
 F:	fs/qnx4/
@@ -4709,7 +4774,6 @@ F:	drivers/char/random.c
 RAPIDIO SUBSYSTEM
 P:	Matt Porter
 M:	mporter@kernel.crashing.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/rapidio/
 
@@ -4723,7 +4787,8 @@ F:	drivers/net/wireless/ray*
 RCUTORTURE MODULE
 P:	Josh Triplett
 M:	josh@freedesktop.org
-L:	linux-kernel@vger.kernel.org
+P:	Paul E. McKenney
+M:	paulmck@linux.vnet.ibm.com
 S:	Maintained
 F:	Documentation/RCU/torture.txt
 F:	kernel/rcutorture.c
@@ -4731,7 +4796,6 @@ F:	kernel/rcutorture.c
 RDC R-321X SoC
 P:	Florian Fainelli
 M:	florian@openwrt.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 RDC R6040 FAST ETHERNET DRIVER
@@ -4744,15 +4808,16 @@ F:	drivers/net/r6040.c
 RDS - RELIABLE DATAGRAM SOCKETS
 P:	Andy Grover
 M:	andy.grover@oracle.com
-L:	rds-devel@oss.oracle.com
+L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/
 
 READ-COPY UPDATE (RCU)
 P:	Dipankar Sarma
 M:	dipankar@in.ibm.com
+P:	Paul E. McKenney
+M:	paulmck@linux.vnet.ibm.com
 W:	http://www.rdrop.com/users/paulmck/rclock/
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	Documentation/RCU/rcu.txt
 F:	Documentation/RCU/rcuref.txt
@@ -4763,7 +4828,6 @@ F:	kernel/rcupdate.c
 REAL TIME CLOCK DRIVER
 P:	Paul Gortmaker
 M:	p_gortmaker@yahoo.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/rtc.txt
 F:	drivers/rtc/
@@ -4784,9 +4848,9 @@ S:	Supported
 F:	fs/reiserfs/
 
 RFKILL
-P:	Ivo van Doorn
-M:	IvDoorn@gmail.com
-L:	netdev@vger.kernel.org
+P:	Johannes Berg
+M:	johannes@sipsolutions.net
+L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F	Documentation/rfkill.txt
 F:	net/rfkill/
@@ -4901,7 +4965,6 @@ S3C24XX SD/MMC Driver
 P:	Ben Dooks
 M:	ben-linux@fluff.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/mmc/host/s3cmci.*
 
@@ -4927,7 +4990,6 @@ P:	Ingo Molnar
 M:	mingo@elte.hu
 P:	Peter Zijlstra
 M:	peterz@infradead.org
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
@@ -5029,7 +5091,6 @@ F:	drivers/mmc/host/sdhci.*
 SECURITY SUBSYSTEM
 P:	James Morris
 M:	jmorris@namei.org
-L:	linux-kernel@vger.kernel.org
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
 W:	http://security.wiki.kernel.org/
@@ -5048,7 +5109,6 @@ P:	James Morris
 M:	jmorris@namei.org
 P:	Eric Paris
 M:	eparis@parisplace.org
-L:	linux-kernel@vger.kernel.org (kernel issues)
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
@@ -5145,7 +5205,6 @@ P:	Vincent Sanders
 M:	support@simtec.co.uk
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
-F:	arch/arm/mach-ebsa110/
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
@@ -5312,7 +5371,6 @@ F:	include/linux/sony-laptop.h
 SONY MEMORYSTICK CARD SUPPORT
 P:	Alex Dubov
 M:	oakad@yahoo.com
-L:	linux-kernel@vger.kernel.org
 W:	http://tifmxx.berlios.de/
 S:	Maintained
 F:	drivers/memstick/host/tifm_ms.c
@@ -5322,7 +5380,7 @@ P:	Jaroslav Kysela
 M:	perex@perex.cz
 P:	Takashi Iwai
 M:	tiwai@suse.de
-L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
 T:	git git://git.alsa-project.org/alsa-kernel.git
@@ -5337,7 +5395,7 @@ M:	lrg@slimlogic.co.uk
 P:	Mark Brown
 M:	broonie@opensource.wolfsonmicro.com
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
-L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
 F:	sound/soc/
@@ -5355,7 +5413,6 @@ F:	arch/sparc/
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
 P:	Roger Wolff
 M:	R.E.Wolff@BitWizard.nl
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	Documentation/serial/specialix.txt
 F:	drivers/char/specialix*
@@ -5401,7 +5458,6 @@ F:	fs/squashfs/
 SRM (Alpha) environment access
 P:	Jan-Benedict Glaw
 M:	jbglaw@lug-owl.de
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
@@ -5416,7 +5472,6 @@ S:	Maintained
 STAGING SUBSYSTEM
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:	linux-kernel@vger.kernel.org
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Maintained
 F:	drivers/staging/
@@ -5496,7 +5551,6 @@ F:	include/linux/sysv_fs.h
 TASKSTATS STATISTICS INTERFACE
 P:	Balbir Singh
 M:	balbir@linux.vnet.ibm.com
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/accounting/taskstats*
 F:	include/linux/taskstats*
@@ -5559,20 +5613,6 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
-TI OMAP MMC INTERFACE DRIVER
-P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap@vger.kernel.org
-W:	http://linux.omap.com
-W:	http://www.muru.com/linux/omap/
-S:	Maintained
-F:	drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
-S:	Maintained
-F:	drivers/char/hw_random/omap-rng.c
-
 TIPC NETWORK LAYER
 P:	Per Liden
 M:	per.liden@ericsson.com
@@ -5603,7 +5643,6 @@ P:	Kentaro Takeda
 M:	takedakn@nttdata.co.jp
 P:	Tetsuo Handa
 M:	penguin-kernel@I-love.SAKURA.ne.jp
-L:	linux-kernel@vger.kernel.org (kernel issues)
 L:	tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
 L:	tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
 L:	tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
@@ -5655,14 +5694,17 @@ F:	drivers/char/tpm/
 TRIVIAL PATCHES
 P:	Jiri Kosina
 M:	trivial@kernel.org
-L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
+F:	drivers/char/tty_*
+F:	drivers/serial/serial_core.c
+F:	include/linux/serial_core.h
+F:	include/linux/serial.h
+F:	include/linux/tty.h
 
 TTY LAYER
 P:	Alan Cox
 M:	alan@lxorguk.ukuu.org.uk
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
 
@@ -5735,7 +5777,6 @@ F:	fs/udf/
 UFS FILESYSTEM
 P:	Evgeniy Dushistov
 M:	dushistov@mail.ru
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ufs.txt
 F:	fs/ufs/
@@ -5752,7 +5793,6 @@ F:	include/linux/uwb/
 UNIFORM CDROM DRIVER
 P:	Jens Axboe
 M:	axboe@kernel.dk
-L:	linux-kernel@vger.kernel.org
 W:	http://www.kernel.dk
 S:	Maintained
 F:	Documentation/cdrom/
@@ -5781,7 +5821,6 @@ F:	drivers/usb/class/cdc-acm.*
 USB BLOCK DRIVER (UB ub)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
-L:	linux-kernel@vger.kernel.org
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/block/ub.c
@@ -6074,6 +6113,12 @@ L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/rndis_wlan.c
 
+USB XHCI DRIVER
+P:	Sarah Sharp
+M:	sarah.a.sharp@intel.com
+L:	linux-usb@vger.kernel.org
+S:	Supported
+
 USB ZC0301 DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
@@ -6121,7 +6166,6 @@ P:	Hans J. Koch
 M:	hjk@linutronix.de
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
@@ -6147,7 +6191,6 @@ F:	drivers/video/uvesafb.*
 VFAT/FAT/MSDOS FILESYSTEM
 P:	OGAWA Hirofumi
 M:	hirofumi@mail.parknet.co.jp
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
@@ -6191,6 +6234,14 @@ F:	drivers/net/macvlan.c
 F:	include/linux/if_*vlan.h
 F:	net/8021q/
 
+VLYNQ BUS
+P:	Florian Fainelli
+M:	florian@openwrt.org
+L:	openwrt-devel@lists.openwrt.org
+S:	Maintained
+F:	drivers/vlynq/vlynq.c
+F:	include/linux/vlynq.h
+
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
 P:	Liam Girdwood
 M:	lrg@slimlogic.co.uk
@@ -6244,7 +6295,6 @@ F:	drivers/hwmon/w83793.c
 W83L51xD SD/MMC CARD INTERFACE DRIVER
 P:	Pierre Ossman
 M:	pierre@ossman.eu
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/wbsd.*
 
@@ -6331,7 +6381,6 @@ M:	mingo@redhat.com
 P:	H. Peter Anvin
 M:	hpa@zytor.com
 M:	x86@kernel.org
-L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
 S:	Maintained
 F:	Documentation/x86/
@@ -6367,7 +6416,6 @@ XILINX SYSTEMACE DRIVER
 P:	Grant Likely
 M:	grant.likely@secretlab.ca
 W:	http://www.secretlab.ca/
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/xsysace.c
 
@@ -6432,5 +6480,9 @@ F:	drivers/serial/zs.*
 
 THE REST
 P:	Linus Torvalds
+M:	torvalds@linux-foundation.org
+L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
 S:	Buried alive in reporters
+F:	*
+F:	*/
diff --git a/Makefile b/Makefile
index 03373bb703c..ea63667617f 100644
--- a/Makefile
+++ b/Makefile
@@ -35,10 +35,8 @@ MAKEFLAGS += -rR --no-print-directory
 # To put more focus on warnings, be less verbose as default
 # Use 'make V=1' to see the full commands
 
-ifdef V
-  ifeq ("$(origin V)", "command line")
-    KBUILD_VERBOSE = $(V)
-  endif
+ifeq ("$(origin V)", "command line")
+  KBUILD_VERBOSE = $(V)
 endif
 ifndef KBUILD_VERBOSE
   KBUILD_VERBOSE = 0
@@ -54,10 +52,8 @@ endif
 # See the file "Documentation/sparse.txt" for more details, including
 # where to get the "sparse" utility.
 
-ifdef C
-  ifeq ("$(origin C)", "command line")
-    KBUILD_CHECKSRC = $(C)
-  endif
+ifeq ("$(origin C)", "command line")
+  KBUILD_CHECKSRC = $(C)
 endif
 ifndef KBUILD_CHECKSRC
   KBUILD_CHECKSRC = 0
@@ -69,12 +65,10 @@ endif
 ifdef SUBDIRS
   KBUILD_EXTMOD ?= $(SUBDIRS)
 endif
-ifdef M
-  ifeq ("$(origin M)", "command line")
-    KBUILD_EXTMOD := $(M)
-  endif
-endif
 
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
 
 # kbuild supports saving output files in a separate directory.
 # To locate output files in a separate directory two syntaxes are supported.
@@ -98,10 +92,8 @@ ifeq ($(KBUILD_SRC),)
 
 # OK, Make called in directory where kernel src resides
 # Do we want to locate output files in a separate directory?
-ifdef O
-  ifeq ("$(origin O)", "command line")
-    KBUILD_OUTPUT := $(O)
-  endif
+ifeq ("$(origin O)", "command line")
+  KBUILD_OUTPUT := $(O)
 endif
 
 # That's our default target when none is given on the command line
diff --git a/README b/README
index d6c6c742c1d..737838fe73c 100644
--- a/README
+++ b/README
@@ -174,8 +174,17 @@ CONFIGURING the kernel:
 	"make silentoldconfig"
 			   Like above, but avoids cluttering the screen
 			   with questions already answered.
+			   Additionally updates the dependencies.
 	"make defconfig"   Create a ./.config file by using the default
-			   symbol values from arch/$ARCH/defconfig.
+			   symbol values from either arch/$ARCH/defconfig
+			   or arch/$ARCH/configs/${PLATFORM}_defconfig,
+			   depending on the architecture.
+	"make ${PLATFORM}_defconfig"
+			  Create a ./.config file by using the default
+			  symbol values from
+			  arch/$ARCH/configs/${PLATFORM}_defconfig.
+			  Use "make help" to get a list of all available
+			  platforms of your architecture.
 	"make allyesconfig"
 			   Create a ./.config file by setting symbol
 			   values to 'y' as much as possible.
diff --git a/arch/alpha/include/asm/8253pit.h b/arch/alpha/include/asm/8253pit.h
index fef5c1450e4..a71c9c1455a 100644
--- a/arch/alpha/include/asm/8253pit.h
+++ b/arch/alpha/include/asm/8253pit.h
@@ -1,10 +1,3 @@
 /*
  * 8253/8254 Programmable Interval Timer
  */
-
-#ifndef _8253PIT_H
-#define _8253PIT_H
-
-#define PIT_TICK_RATE 	1193180UL
-
-#endif
diff --git a/arch/alpha/include/asm/errno.h b/arch/alpha/include/asm/errno.h
index 69e2655249d..98099bda937 100644
--- a/arch/alpha/include/asm/errno.h
+++ b/arch/alpha/include/asm/errno.h
@@ -120,4 +120,6 @@
 #define	EOWNERDEAD	136	/* Owner died */
 #define	ENOTRECOVERABLE	137	/* State not recoverable */
 
+#define	ERFKILL		138	/* Operation not possible due to RF-kill */
+
 #endif
diff --git a/arch/alpha/include/asm/kmap_types.h b/arch/alpha/include/asm/kmap_types.h
index 3e6735a34c5..a8d4ec8ea4b 100644
--- a/arch/alpha/include/asm/kmap_types.h
+++ b/arch/alpha/include/asm/kmap_types.h
@@ -3,30 +3,12 @@
 
 /* Dummy header just to define km_type. */
 
-
 #ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define  __WITH_KM_FENCE
 #endif
 
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
-#undef D
+#undef __WITH_KM_FENCE
 
 #endif
diff --git a/arch/alpha/kernel/init_task.c b/arch/alpha/kernel/init_task.c
index c2938e574a4..19b86328ffd 100644
--- a/arch/alpha/kernel/init_task.c
+++ b/arch/alpha/kernel/init_task.c
@@ -10,10 +10,7 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
 struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_mm);
 EXPORT_SYMBOL(init_task);
 
 union thread_union init_thread_union
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index 67c19f8a994..38c805dfc54 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -227,7 +227,7 @@ struct irqaction timer_irqaction = {
 	.name		= "timer",
 };
 
-static struct hw_interrupt_type rtc_irq_type = {
+static struct irq_chip rtc_irq_type = {
 	.typename	= "RTC",
 	.startup	= rtc_startup,
 	.shutdown	= rtc_enable_disable,
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 9405bee9894..50bfec9b588 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -83,7 +83,7 @@ i8259a_end_irq(unsigned int irq)
 		i8259a_enable_irq(irq);
 }
 
-struct hw_interrupt_type i8259a_irq_type = {
+struct irq_chip i8259a_irq_type = {
 	.typename	= "XT-PIC",
 	.startup	= i8259a_startup_irq,
 	.shutdown	= i8259a_disable_irq,
diff --git a/arch/alpha/kernel/irq_impl.h b/arch/alpha/kernel/irq_impl.h
index cc9a8a7aa27..b63ccd7386f 100644
--- a/arch/alpha/kernel/irq_impl.h
+++ b/arch/alpha/kernel/irq_impl.h
@@ -36,7 +36,7 @@ extern void i8259a_disable_irq(unsigned int);
 extern void i8259a_mask_and_ack_irq(unsigned int);
 extern unsigned int i8259a_startup_irq(unsigned int);
 extern void i8259a_end_irq(unsigned int);
-extern struct hw_interrupt_type i8259a_irq_type;
+extern struct irq_chip i8259a_irq_type;
 extern void init_i8259a_irqs(void);
 
 extern void handle_irq(int irq);
diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c
index d53edbccbfe..69199a76ec4 100644
--- a/arch/alpha/kernel/irq_pyxis.c
+++ b/arch/alpha/kernel/irq_pyxis.c
@@ -70,7 +70,7 @@ pyxis_mask_and_ack_irq(unsigned int irq)
 	*(vulp)PYXIS_INT_MASK;
 }
 
-static struct hw_interrupt_type pyxis_irq_type = {
+static struct irq_chip pyxis_irq_type = {
 	.typename	= "PYXIS",
 	.startup	= pyxis_startup_irq,
 	.shutdown	= pyxis_disable_irq,
diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c
index a03fbca4940..85229369a1f 100644
--- a/arch/alpha/kernel/irq_srm.c
+++ b/arch/alpha/kernel/irq_srm.c
@@ -48,7 +48,7 @@ srm_end_irq(unsigned int irq)
 }
 
 /* Handle interrupts from the SRM, assuming no additional weirdness.  */
-static struct hw_interrupt_type srm_irq_type = {
+static struct irq_chip srm_irq_type = {
 	.typename	= "SRM",
 	.startup	= srm_startup_irq,
 	.shutdown	= srm_disable_irq,
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 80df86cd746..d2634e4476b 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -252,9 +252,9 @@ reserve_std_resources(void)
 }
 
 #define PFN_MAX		PFN_DOWN(0x80000000)
-#define for_each_mem_cluster(memdesc, cluster, i)		\
-	for ((cluster) = (memdesc)->cluster, (i) = 0;		\
-	     (i) < (memdesc)->numclusters; (i)++, (cluster)++)
+#define for_each_mem_cluster(memdesc, _cluster, i)		\
+	for ((_cluster) = (memdesc)->cluster, (i) = 0;		\
+	     (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
 
 static unsigned long __init
 get_mem_size_limit(char *s)
diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
index e53a1e1c2f2..382035ef739 100644
--- a/arch/alpha/kernel/sys_alcor.c
+++ b/arch/alpha/kernel/sys_alcor.c
@@ -89,7 +89,7 @@ alcor_end_irq(unsigned int irq)
 		alcor_enable_irq(irq);
 }
 
-static struct hw_interrupt_type alcor_irq_type = {
+static struct irq_chip alcor_irq_type = {
 	.typename	= "ALCOR",
 	.startup	= alcor_startup_irq,
 	.shutdown	= alcor_disable_irq,
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index ace475c124f..ed349436732 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -71,7 +71,7 @@ cabriolet_end_irq(unsigned int irq)
 		cabriolet_enable_irq(irq);
 }
 
-static struct hw_interrupt_type cabriolet_irq_type = {
+static struct irq_chip cabriolet_irq_type = {
 	.typename	= "CABRIOLET",
 	.startup	= cabriolet_startup_irq,
 	.shutdown	= cabriolet_disable_irq,
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index 5bd5259324b..46e70ece517 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -198,7 +198,7 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 	return 0;
 }
 
-static struct hw_interrupt_type dp264_irq_type = {
+static struct irq_chip dp264_irq_type = {
 	.typename	= "DP264",
 	.startup	= dp264_startup_irq,
 	.shutdown	= dp264_disable_irq,
@@ -209,7 +209,7 @@ static struct hw_interrupt_type dp264_irq_type = {
 	.set_affinity	= dp264_set_affinity,
 };
 
-static struct hw_interrupt_type clipper_irq_type = {
+static struct irq_chip clipper_irq_type = {
 	.typename	= "CLIPPER",
 	.startup	= clipper_startup_irq,
 	.shutdown	= clipper_disable_irq,
@@ -298,7 +298,7 @@ clipper_srm_device_interrupt(unsigned long vector)
 }
 
 static void __init
-init_tsunami_irqs(struct hw_interrupt_type * ops, int imin, int imax)
+init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
 {
 	long i;
 	for (i = imin; i <= imax; ++i) {
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
index 9c5a306dc0e..660c23ef661 100644
--- a/arch/alpha/kernel/sys_eb64p.c
+++ b/arch/alpha/kernel/sys_eb64p.c
@@ -69,7 +69,7 @@ eb64p_end_irq(unsigned int irq)
 		eb64p_enable_irq(irq);
 }
 
-static struct hw_interrupt_type eb64p_irq_type = {
+static struct irq_chip eb64p_irq_type = {
 	.typename	= "EB64P",
 	.startup	= eb64p_startup_irq,
 	.shutdown	= eb64p_disable_irq,
diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c
index baf60f36cbd..b99ea488d84 100644
--- a/arch/alpha/kernel/sys_eiger.c
+++ b/arch/alpha/kernel/sys_eiger.c
@@ -80,7 +80,7 @@ eiger_end_irq(unsigned int irq)
 		eiger_enable_irq(irq);
 }
 
-static struct hw_interrupt_type eiger_irq_type = {
+static struct irq_chip eiger_irq_type = {
 	.typename	= "EIGER",
 	.startup	= eiger_startup_irq,
 	.shutdown	= eiger_disable_irq,
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index 2b5caf3d9b1..ef0b83a070a 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -118,7 +118,7 @@ jensen_local_end(unsigned int irq)
 		i8259a_end_irq(1);
 }
 
-static struct hw_interrupt_type jensen_local_irq_type = {
+static struct irq_chip jensen_local_irq_type = {
 	.typename	= "LOCAL",
 	.startup	= jensen_local_startup,
 	.shutdown	= jensen_local_shutdown,
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index c5a1a2438c6..bbfc4f20ca7 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -169,7 +169,7 @@ marvel_irq_noop_return(unsigned int irq)
 	return 0; 
 }
 
-static struct hw_interrupt_type marvel_legacy_irq_type = {
+static struct irq_chip marvel_legacy_irq_type = {
 	.typename	= "LEGACY",
 	.startup	= marvel_irq_noop_return,
 	.shutdown	= marvel_irq_noop,
@@ -179,7 +179,7 @@ static struct hw_interrupt_type marvel_legacy_irq_type = {
 	.end		= marvel_irq_noop,
 };
 
-static struct hw_interrupt_type io7_lsi_irq_type = {
+static struct irq_chip io7_lsi_irq_type = {
 	.typename	= "LSI",
 	.startup	= io7_startup_irq,
 	.shutdown	= io7_disable_irq,
@@ -189,7 +189,7 @@ static struct hw_interrupt_type io7_lsi_irq_type = {
 	.end		= io7_end_irq,
 };
 
-static struct hw_interrupt_type io7_msi_irq_type = {
+static struct irq_chip io7_msi_irq_type = {
 	.typename	= "MSI",
 	.startup	= io7_startup_irq,
 	.shutdown	= io7_disable_irq,
@@ -273,8 +273,8 @@ init_one_io7_msi(struct io7 *io7, unsigned int which, unsigned int where)
 
 static void __init
 init_io7_irqs(struct io7 *io7, 
-	      struct hw_interrupt_type *lsi_ops,
-	      struct hw_interrupt_type *msi_ops)
+	      struct irq_chip *lsi_ops,
+	      struct irq_chip *msi_ops)
 {
 	long base = (io7->pe << MARVEL_IRQ_VEC_PE_SHIFT) + 16;
 	long i;
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index 8d3e9429c5e..4e366641a08 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -68,7 +68,7 @@ mikasa_end_irq(unsigned int irq)
 		mikasa_enable_irq(irq);
 }
 
-static struct hw_interrupt_type mikasa_irq_type = {
+static struct irq_chip mikasa_irq_type = {
 	.typename	= "MIKASA",
 	.startup	= mikasa_startup_irq,
 	.shutdown	= mikasa_disable_irq,
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index 538876b6244..35753a173ba 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -73,7 +73,7 @@ noritake_end_irq(unsigned int irq)
                 noritake_enable_irq(irq);
 }
 
-static struct hw_interrupt_type noritake_irq_type = {
+static struct irq_chip noritake_irq_type = {
 	.typename	= "NORITAKE",
 	.startup	= noritake_startup_irq,
 	.shutdown	= noritake_disable_irq,
diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c
index 672cb2df53d..f3aec7e085c 100644
--- a/arch/alpha/kernel/sys_rawhide.c
+++ b/arch/alpha/kernel/sys_rawhide.c
@@ -135,7 +135,7 @@ rawhide_end_irq(unsigned int irq)
 		rawhide_enable_irq(irq);
 }
 
-static struct hw_interrupt_type rawhide_irq_type = {
+static struct irq_chip rawhide_irq_type = {
 	.typename	= "RAWHIDE",
 	.startup	= rawhide_startup_irq,
 	.shutdown	= rawhide_disable_irq,
diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c
index f15a329b601..d9f9cfeb993 100644
--- a/arch/alpha/kernel/sys_ruffian.c
+++ b/arch/alpha/kernel/sys_ruffian.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
+#include <linux/timex.h>
 #include <linux/init.h>
 
 #include <asm/ptrace.h>
diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c
index ce1faa6f1df..fc924637345 100644
--- a/arch/alpha/kernel/sys_rx164.c
+++ b/arch/alpha/kernel/sys_rx164.c
@@ -72,7 +72,7 @@ rx164_end_irq(unsigned int irq)
 		rx164_enable_irq(irq);
 }
 
-static struct hw_interrupt_type rx164_irq_type = {
+static struct irq_chip rx164_irq_type = {
 	.typename	= "RX164",
 	.startup	= rx164_startup_irq,
 	.shutdown	= rx164_disable_irq,
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 9e263256a42..426eb6906d0 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -501,7 +501,7 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
 	spin_unlock(&sable_lynx_irq_lock);
 }
 
-static struct hw_interrupt_type sable_lynx_irq_type = {
+static struct irq_chip sable_lynx_irq_type = {
 	.typename	= "SABLE/LYNX",
 	.startup	= sable_lynx_startup_irq,
 	.shutdown	= sable_lynx_disable_irq,
diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c
index 9bd9a31450c..830318c2166 100644
--- a/arch/alpha/kernel/sys_takara.c
+++ b/arch/alpha/kernel/sys_takara.c
@@ -74,7 +74,7 @@ takara_end_irq(unsigned int irq)
 		takara_enable_irq(irq);
 }
 
-static struct hw_interrupt_type takara_irq_type = {
+static struct irq_chip takara_irq_type = {
 	.typename	= "TAKARA",
 	.startup	= takara_startup_irq,
 	.shutdown	= takara_disable_irq,
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 8dd239ebdb9..88978fc60f8 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -185,7 +185,7 @@ titan_srm_device_interrupt(unsigned long vector)
 
 
 static void __init
-init_titan_irqs(struct hw_interrupt_type * ops, int imin, int imax)
+init_titan_irqs(struct irq_chip * ops, int imin, int imax)
 {
 	long i;
 	for (i = imin; i <= imax; ++i) {
@@ -194,7 +194,7 @@ init_titan_irqs(struct hw_interrupt_type * ops, int imin, int imax)
 	}
 }
 
-static struct hw_interrupt_type titan_irq_type = {
+static struct irq_chip titan_irq_type = {
        .typename       = "TITAN",
        .startup        = titan_startup_irq,
        .shutdown       = titan_disable_irq,
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
index 42c3eede4d0..e91b4c3838a 100644
--- a/arch/alpha/kernel/sys_wildfire.c
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -157,7 +157,7 @@ wildfire_end_irq(unsigned int irq)
 		wildfire_enable_irq(irq);
 }
 
-static struct hw_interrupt_type wildfire_irq_type = {
+static struct irq_chip wildfire_irq_type = {
 	.typename	= "WILDFIRE",
 	.startup	= wildfire_startup_irq,
 	.shutdown	= wildfire_disable_irq,
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index a13de49d126..0eab5574942 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -28,9 +28,9 @@ EXPORT_SYMBOL(node_data);
 #define DBGDCONT(args...)
 #endif
 
-#define for_each_mem_cluster(memdesc, cluster, i)		\
-	for ((cluster) = (memdesc)->cluster, (i) = 0;		\
-	     (i) < (memdesc)->numclusters; (i)++, (cluster)++)
+#define for_each_mem_cluster(memdesc, _cluster, i)		\
+	for ((_cluster) = (memdesc)->cluster, (i) = 0;		\
+	     (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
 
 static void __init show_mem_layout(void)
 {
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9d02cdb15b2..29475101a7b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION
 
 config GENERIC_GPIO
 	bool
-	default n
 
 config GENERIC_TIME
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
-	default n
 
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
@@ -55,7 +52,6 @@ config MMU
 
 config NO_IOPORT
 	bool
-	default n
 
 config EISA
 	bool
@@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM
 
 config ARCH_HAS_ILOG2_U32
 	bool
-	default n
 
 config ARCH_HAS_ILOG2_U64
 	bool
-	default n
 
 config GENERIC_HWEIGHT
 	bool
@@ -253,6 +247,14 @@ config ARCH_CLPS711X
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
+config ARCH_GEMINI
+	bool "Cortina Systems Gemini"
+	select CPU_FA526
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Cortina Systems Gemini family SoCs
+
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select CPU_SA110
@@ -277,14 +279,6 @@ config ARCH_EP93XX
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
-config ARCH_GEMINI
-	bool "Cortina Systems Gemini"
-	select CPU_FA526
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for the Cortina Systems Gemini family SoCs
-
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
@@ -293,6 +287,30 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
+config ARCH_MXC
+	bool "Freescale MXC/iMX-based"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+config ARCH_STMP3XXX
+	bool "Freescale STMP3xxx"
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select USB_ARCH_HAS_EHCI
+	help
+	  Support for systems based on the Freescale 3xxx CPUs.
+
 config ARCH_NETX
 	bool "Hilscher NetX based"
 	select CPU_ARM926T
@@ -309,15 +327,6 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
-config ARCH_IMX
-	bool "IMX"
-	select CPU_ARM920T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Motorola's i.MX family of processors (MX1, MXL).
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -398,6 +407,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -405,28 +415,6 @@ config ARCH_KIRKWOOD
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
 
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
-	select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
-
-config ARCH_NS9XXX
-	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-	  System.
-
-	  <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
 	select CPU_FEROCEON
@@ -441,6 +429,7 @@ config ARCH_MV78XX0
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -448,23 +437,13 @@ config ARCH_MV78XX0
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
 
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
 	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -473,6 +452,52 @@ config ARCH_ORION5X
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
 	  Orion-2 (5281), Orion-1-90 (6183).
 
+config ARCH_MMP
+	bool "Marvell PXA168/910"
+	depends on MMU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+	bool "Micrel/Kendin KS8695"
+	select CPU_ARM922T
+	select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+	  System-on-Chip devices.
+
+config ARCH_NS9XXX
+	bool "NetSilicon NS9xxx"
+	select CPU_ARM926T
+	select GENERIC_GPIO
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	help
+	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+	  System.
+
+	  <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+	bool "Nuvoton W90X900 CPU"
+	select CPU_ARM926T
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	select COMMON_CLKDEV
+	help
+		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+		can login www.mcuos.com or www.nuvoton.com to know more.
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
@@ -495,19 +520,16 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_MMP
-	bool "Marvell PXA168/910"
-	depends on MMU
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
+config ARCH_MSM
+	bool "Qualcomm MSM"
+	select CPU_V6
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select TICK_ONESHOT
-	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/910 processor line.
+	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
+	  apps processor of the MSM7K and depends on a shared memory
+	  interface to the ARM9 modem processor which runs the baseband stack
+	  and controls some vital subsystems (clock and power control, etc).
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -576,6 +598,20 @@ config ARCH_LH7A40X
 	  core with a wide array of integrated devices for
 	  hand-held and low-power applications.
 
+config ARCH_U300
+	bool "ST-Ericsson U300 Series"
+	depends on MMU
+	select CPU_ARM926T
+	select ARM_AMBA
+	select ARM_VIC
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_GPIO
+	help
+	  Support for ST-Ericsson U300 series mobile platforms.
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select CPU_ARM926T
@@ -587,6 +623,7 @@ config ARCH_DAVINCI
 	select ZONE_DMA
 	select HAVE_IDE
 	select COMMON_CLKDEV
+	select GENERIC_ALLOCATOR
 	help
 	  Support for TI's DaVinci platform.
 
@@ -600,24 +637,6 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_MSM
-	bool "Qualcomm MSM"
-	select CPU_V6
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
-	  apps processor of the MSM7K and depends on a shared memory
-	  interface to the ARM9 modem processor which runs the baseband stack
-	  and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
-	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
-
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -681,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig"
 source "arch/arm/mach-s3c6410/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/plat-stmp3xxx/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
 
@@ -707,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
+source "arch/arm/mach-u300/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -859,8 +880,11 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -878,6 +902,18 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config HAVE_ARM_SCU
+	bool
+	depends on SMP
+	help
+	  This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+	bool
+	depends on SMP
+	help
+	  This options enables support for the ARM timer and watchdog unit
+
 choice
 	prompt "Memory split"
 	default VMSPLIT_3G
@@ -916,8 +952,10 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
 	default y
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -979,7 +1017,6 @@ config OABI_COMPAT
 
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
@@ -1022,12 +1059,12 @@ source "mm/Kconfig"
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
 		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182
+		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP
 	  correct operation of some network protocols. With an IP-only
 	  configuration it is safe to say N, otherwise say Y.
 
+config UACCESS_WITH_MEMCPY
+	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
+	depends on MMU && EXPERIMENTAL
+	default y if CPU_FEROCEON
+	help
+	  Implement faster copy_to_user and clear_user methods for CPU
+	  cores where a 8-word STM instruction give significantly higher
+	  memory write throughput than a sequence of individual 32bit stores.
+
+	  A possible side effect is a slight increase in scheduling latency
+	  between threads sharing the same address space if they invoke
+	  such copy operations with large buffers.
+
+	  However, if the CPU data cache is using a write-allocate mode,
+	  this option is unlikely to provide any performance gain.
+
 endmenu
 
 menu "Boot options"
@@ -1188,7 +1241,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR
 
 	  If in doubt, say Y.
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_IMX && CPU_FREQ
-	default n
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
-	  If in doubt, say N.
+config CPU_FREQ_PXA
+	bool
+	depends on CPU_FREQ && ARCH_PXA && PXA25x
+	default y
+	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
 endif
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e84729bf13d..c877d6df23d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -11,6 +11,9 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux	+= --be8
+endif
 CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
@@ -99,64 +102,73 @@ CHECKFLAGS	+= -D__arm__
 #Default value
 head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
-
- machine-$(CONFIG_ARCH_RPC)	   := rpc
- machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
- machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
- machine-$(CONFIG_ARCH_SHARK)	   := shark
- machine-$(CONFIG_ARCH_SA1100)	   := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111)	   := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
 endif
- machine-$(CONFIG_ARCH_PXA)	   := pxa
- machine-$(CONFIG_ARCH_MMP)	   := mmp
-    plat-$(CONFIG_PLAT_PXA)	   := pxa
- machine-$(CONFIG_ARCH_L7200)	   := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI)     := gemini
- textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
- machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
- machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
- machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
-    plat-$(CONFIG_PLAT_IOP)	   := iop
- machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1)	   := omap1
- machine-$(CONFIG_ARCH_OMAP2)	   := omap2
- machine-$(CONFIG_ARCH_OMAP3)	   := omap2
-    plat-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0)	   := s3c24a0
-    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX)	   := s3c6400 s3c6410
-    plat-$(CONFIG_PLAT_S3C64XX)	   := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE)  := versatile
- machine-$(CONFIG_ARCH_IMX)	   := imx
- machine-$(CONFIG_ARCH_H720X)	   := h720x
- machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)	   := at91
- machine-$(CONFIG_ARCH_EP93XX)	   := ep93xx
- machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
- machine-$(CONFIG_ARCH_NETX)	   := netx
- machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
- machine-$(CONFIG_ARCH_KS8695)     := ks8695
-    plat-$(CONFIG_ARCH_MXC)	   := mxc
- machine-$(CONFIG_ARCH_MX2)	   := mx2
- machine-$(CONFIG_ARCH_MX3)	   := mx3
- machine-$(CONFIG_ARCH_MX1)	   := mx1
- machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
-    plat-$(CONFIG_PLAT_ORION)	   := orion
- machine-$(CONFIG_ARCH_MSM)	   := msm
- machine-$(CONFIG_ARCH_LOKI)       := loki
- machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
- machine-$(CONFIG_ARCH_W90X900)    := w90x900
+
+# Machine directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
+machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
+machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
+machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
+machine-$(CONFIG_ARCH_GEMINI)		:= gemini
+machine-$(CONFIG_ARCH_H720X)		:= h720x
+machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
+machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
+machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
+machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
+machine-$(CONFIG_ARCH_IXP2000)		:= ixp2000
+machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
+machine-$(CONFIG_ARCH_KS8695)		:= ks8695
+machine-$(CONFIG_ARCH_L7200)		:= l7200
+machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
+machine-$(CONFIG_ARCH_LOKI) 		:= loki
+machine-$(CONFIG_ARCH_MMP)		:= mmp
+machine-$(CONFIG_ARCH_MSM)		:= msm
+machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
+machine-$(CONFIG_ARCH_MX1)		:= mx1
+machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
+machine-$(CONFIG_ARCH_OMAP1)		:= omap1
+machine-$(CONFIG_ARCH_OMAP2)		:= omap2
+machine-$(CONFIG_ARCH_OMAP3)		:= omap2
+machine-$(CONFIG_ARCH_OMAP4)		:= omap2
+machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
+machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
+machine-$(CONFIG_ARCH_PXA)		:= pxa
+machine-$(CONFIG_ARCH_REALVIEW)		:= realview
+machine-$(CONFIG_ARCH_RPC)		:= rpc
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100)		:= sa1100
+machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
+machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_U300)		:= u300
+machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
+machine-$(CONFIG_ARCH_W90X900)		:= w90x900
+machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+
+# Platform directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC)		:= mxc
+plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_PLAT_IOP)		:= iop
+plat-$(CONFIG_PLAT_ORION)	:= orion
+plat-$(CONFIG_PLAT_PXA)		:= pxa
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index fbe5eef1f6c..ce39dc54008 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -40,7 +40,7 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
 OBJS		+= head-sharpsl.o
 endif
 
-ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
 ifeq ($(CONFIG_CPU_CP15),y)
 OBJS		+= big-endian.o
 else
@@ -78,6 +78,9 @@ EXTRA_AFLAGS  := -Wa,-march=all
 # linker symbols.  We only define initrd_phys and params_phys if the
 # machine class defined the corresponding makefile variable.
 LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
 ifneq ($(INITRD_PHYS),)
 LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
 endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b371fba1b95..01d49be3b2c 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,9 @@ __armv4_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
@@ -455,6 +458,9 @@ __armv7_mmu_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_CPU_ENDIAN_BE8
+		orr	r0, r0, #1 << 25	@ big-endian page tables
+#endif
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index a2cd9beaf37..4efbb9df044 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -4,6 +4,14 @@ config ARM_GIC
 config ARM_VIC
 	bool
 
+config ARM_VIC_NR
+	int
+	default 2
+	depends on ARM_VIC
+	help
+	  The maximum number of VICs available in the system, for
+	  power management.
+
 config ICST525
 	bool
 
@@ -27,10 +35,6 @@ config SHARP_LOCOMO
 config SHARP_PARAM
 	bool
 
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-
 config SHARP_SCOOP
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 7cb7961d81c..76be7ff2a7c 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
-obj-$(CONFIG_SHARPSL_PM)	+= sharpsl_pm.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 5589444ff43..f37afd9422f 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
 }
 EXPORT_SYMBOL(clkdev_alloc);
 
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_get(dev, id);
+	struct clk_lookup *l;
+
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	l = clkdev_alloc(r, alias, alias_dev_name);
+	clk_put(r);
+	if (!l)
+		return -ENODEV;
+	clkdev_add(l);
+	return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
 /*
  * clkdev_drop - remove a clock dynamically allocated
  */
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
deleted file mode 100644
index 140f1d721d5..00000000000
--- a/arch/arm/common/sharpsl_pm.c
+++ /dev/null
@@ -1,859 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
- * series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/apm_bios.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/apm-emulation.h>
-#include <linux/suspend.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pm.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
-
-#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
-
-/*
- * Prototypes
- */
-#ifdef CONFIG_PM
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
-#endif
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(struct work_struct *private_);
-static void sharpsl_battery_thread(struct work_struct *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
-DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
-DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-
-
-static int get_percentage(int voltage)
-{
-	int i = sharpsl_pm.machinfo->bat_levels - 1;
-	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
-	struct battery_thresh *thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
-	else
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
-
-	while (i > 0 && (voltage > thresh[i].voltage))
-		i--;
-
-	return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
-	int low_thresh, high_thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON) {
-		high_thresh = sharpsl_pm.machinfo->status_high_acin;
-		low_thresh = sharpsl_pm.machinfo->status_low_acin;
-	} else {
-		high_thresh = sharpsl_pm.machinfo->status_high_noac;
-		low_thresh = sharpsl_pm.machinfo->status_low_noac;
-	}
-
-	if (voltage >= high_thresh)
-		return APM_BATTERY_STATUS_HIGH;
-	if (voltage >= low_thresh)
-		return APM_BATTERY_STATUS_LOW;
-	return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(struct work_struct *private_)
-{
-	int voltage, percent, apm_status, i = 0;
-
-	if (!sharpsl_pm.machinfo)
-		return;
-
-	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
-	/* Corgi cannot confirm when battery fully charged so periodically kick! */
-	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
-			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
-		schedule_delayed_work(&toggle_charger, 0);
-
-	while(1) {
-		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
-		if (voltage > 0) break;
-		if (i++ > 5) {
-			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
-			break;
-		}
-	}
-
-	voltage = sharpsl_average_value(voltage);
-	apm_status = get_apm_status(voltage);
-	percent = get_percentage(voltage);
-
-	/* At low battery voltages, the voltage has a tendency to start
-           creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
-		sharpsl_pm.battstat.mainbat_voltage = voltage;
-		sharpsl_pm.battstat.mainbat_status = apm_status;
-		sharpsl_pm.battstat.mainbat_percent = percent;
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
-			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-#ifdef CONFIG_BACKLIGHT_CORGI
-	/* If battery is low. limit backlight intensity to save power. */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
-			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
-		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			sharpsl_pm.machinfo->backlight_limit(1);
-			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
-		}
-	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		sharpsl_pm.machinfo->backlight_limit(0);
-		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
-	}
-#endif
-
-	/* Suspend if critical battery level */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		dev_err(sharpsl_pm.dev, "Fatal Off\n");
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-void sharpsl_pm_led(int val)
-{
-	if (val == SHARPSL_LED_ERROR) {
-		dev_err(sharpsl_pm.dev, "Charging Error!\n");
-	} else if (val == SHARPSL_LED_ON) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
-	}
-}
-
-static void sharpsl_charge_on(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
-	sharpsl_pm.full_count = 0;
-	sharpsl_pm.charge_mode = CHRG_ON;
-	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_OFF);
-	sharpsl_pm.charge_mode = CHRG_OFF;
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-static void sharpsl_charge_error(void)
-{
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(struct work_struct *private_)
-{
-	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		sharpsl_charge_off();
-		return;
-	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
-		sharpsl_charge_error();
-		return;
-	}
-
-	sharpsl_pm_led(SHARPSL_LED_ON);
-	sharpsl_pm.machinfo->charge(0);
-	mdelay(SHARPSL_CHARGE_WAIT_TIME);
-	sharpsl_pm.machinfo->charge(1);
-
-	sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
-	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
-
-	sharpsl_average_clear();
-	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
-		sharpsl_charge_on();
-	else if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_charge_off();
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
-{
-	/* Delay the event slightly to debounce */
-	/* Must be a smaller delay than the chrg_full_isr below */
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
-	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
-	sharpsl_pm.full_count++;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
-		if (sharpsl_pm.charge_mode == CHRG_ON)
-			sharpsl_charge_off();
-	} else if (sharpsl_pm.full_count < 2) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else {
-		sharpsl_charge_off();
-		sharpsl_pm.charge_mode = CHRG_DONE;
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
-	}
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC status change so
-   delay until after that has been processed */
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
-{
-	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
-		return IRQ_HANDLED;
-
-	/* delay until after any ac interrupt */
-	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
-	return IRQ_HANDLED;
-}
-
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
-{
-	int is_fatal = 0;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
-		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
-		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM    10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
-	sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
-	int i, ad_val = 0;
-	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
-	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
-		sharpsl_ad_index = 0;
-		return ad;
-	}
-
-	sharpsl_ad[sharpsl_ad_index] = ad;
-	sharpsl_ad_index++;
-	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
-			sharpsl_ad[i] = sharpsl_ad[i+1];
-		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
-	}
-	for (i=0; i < sharpsl_ad_index; i++)
-		ad_val += sharpsl_ad[i];
-
-	return (ad_val / sharpsl_ad_index);
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
-	int i, j, k, temp, sum = 0;
-
-	/* Find MAX val */
-	temp = val[0];
-	j=0;
-	for (i=1; i<5; i++) {
-		if (temp < val[i]) {
-			temp = val[i];
-			j = i;
-		}
-	}
-
-	/* Find MIN val */
-	temp = val[4];
-	k=4;
-	for (i=3; i>=0; i--) {
-		if (temp > val[i]) {
-			temp = val[i];
-			k = i;
-		}
-	}
-
-	for (i=0; i<5; i++)
-		if (i != j && i != k )
-			sum += val[i];
-
-	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
-	return (sum/3);
-}
-
-static int sharpsl_check_battery_temp(void)
-{
-	int val, i, buff[5];
-
-	/* Check battery temperature */
-	for (i=0; i<5; i++) {
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		sharpsl_pm.machinfo->measure_temp(1);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
-		sharpsl_pm.machinfo->measure_temp(0);
-	}
-
-	val = get_select_val(buff);
-
-	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > sharpsl_pm.machinfo->charge_on_temp) {
-		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_check_battery_voltage(void)
-{
-	int val, i, buff[5];
-
-	/* disable charge, enable discharge */
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.machinfo->discharge(1);
-	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery voltage */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	sharpsl_pm.machinfo->discharge(0);
-
-	val = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
-	if (val < sharpsl_pm.machinfo->charge_on_volt)
-		return -1;
-
-	return 0;
-}
-#endif
-
-static int sharpsl_ac_check(void)
-{
-	int temp, i, buff[5];
-
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
-
-	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_scheduled_work();
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-	else
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
-	return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
-	/* Clear the reset source indicators as they break the bootloader upon reboot */
-	RCSR = 0x0f;
-	sharpsl_average_clear();
-	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
-	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
-	return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
-	/* not charging and AC-IN! */
-
-	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
-		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
-		sharpsl_pm.charge_mode = CHRG_OFF;
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-		sharpsl_off_charge_battery();
-	}
-
-	sharpsl_pm.machinfo->presuspend();
-
-	PEDR = 0xffffffff; /* clear it */
-
-	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
-	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
-		RTSR &= RTSR_ALE;
-		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
-		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
-	} else if (alarm_enable) {
-		RTSR &= RTSR_ALE;
-		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
-	}
-
-	pxa_pm_enter(state);
-
-	sharpsl_pm.machinfo->postsuspend();
-
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
-	{
-		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
-			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		if(sharpsl_off_charge_battery()) {
-			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
-	}
-
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
-	{
-		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
-		corgi_goto_sleep(alarm_time, alarm_enable, state);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long alarm_time = RTAR;
-	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
-	corgi_goto_sleep(alarm_time, alarm_status, state);
-
-	while (corgi_enter_suspend(alarm_time,alarm_status,state))
-		{}
-
-	if (sharpsl_pm.machinfo->earlyresume)
-		sharpsl_pm.machinfo->earlyresume();
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
-	return 0;
-}
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
-	int buff[5], temp, i, acin;
-
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
-	/* Check AC-Adapter */
-	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		sharpsl_pm.machinfo->charge(0);
-		udelay(100);
-		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
-		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery : check inserting battery ? */
-	for (i=0; i<5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		udelay(100);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.machinfo->discharge(0);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
-	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
-			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
-		return -1;
-	return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-	return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
-	int time;
-
-	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
-	if (sharpsl_pm.charge_mode == CHRG_OFF) {
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
-		/* AC Check */
-		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
-			return sharpsl_off_charge_error();
-
-		/* Start Charging */
-		sharpsl_pm_led(SHARPSL_LED_ON);
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-
-		sharpsl_pm.charge_mode = CHRG_ON;
-		sharpsl_pm.full_count = 0;
-
-		return 1;
-	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
-		return 1;
-	}
-
-	if (sharpsl_pm.full_count == 0) {
-		int time;
-
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
-		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
-			return sharpsl_off_charge_error();
-
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.charge_mode = CHRG_ON;
-
-		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-		time = RCNR;
-		while(1) {
-			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-				return 0;
-			/* Check for timeout */
-			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
-				return 1;
-			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
-	   			sharpsl_pm.full_count++;
-				sharpsl_pm.machinfo->charge(0);
-				mdelay(SHARPSL_CHARGE_WAIT_TIME);
-				sharpsl_pm.machinfo->charge(1);
-				return 1;
-			}
-		}
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
-	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-	time = RCNR;
-	while(1) {
-		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-			return 0;
-		/* Check for timeout */
-		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
-			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
-				sharpsl_pm.full_count = 0;
-			}
-			sharpsl_pm.full_count++;
-			return 1;
-		}
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_DONE;
-			return 1;
-		}
-	}
-}
-#else
-#define sharpsl_pm_suspend	NULL
-#define sharpsl_pm_resume	NULL
-#endif
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
-	info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-	else
-		info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
-	info->battery_flag = (1 << info->battery_status);
-	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-#ifdef CONFIG_PM
-static struct platform_suspend_ops sharpsl_pm_ops = {
-	.enter		= corgi_pxa_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-#endif
-
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	sharpsl_pm.dev = &pdev->dev;
-	sharpsl_pm.machinfo = pdev->dev.platform_data;
-	sharpsl_pm.charge_mode = CHRG_OFF;
-	sharpsl_pm.flags = 0;
-
-	init_timer(&sharpsl_pm.ac_timer);
-	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
-	init_timer(&sharpsl_pm.chrg_full_timer);
-	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
-	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->init();
-
-	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
-	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
-	if (ret != 0)
-		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
-
-	apm_get_power_status = sharpsl_apm_get_power_status;
-
-#ifdef CONFIG_PM
-	suspend_set_ops(&sharpsl_pm_ops);
-#endif
-
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return 0;
-}
-
-static int sharpsl_pm_remove(struct platform_device *pdev)
-{
-	suspend_set_ops(NULL);
-
-	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
-	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->exit();
-
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
-}
-
-static struct platform_driver sharpsl_pm_driver = {
-	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
-	.suspend	= sharpsl_pm_suspend,
-	.resume		= sharpsl_pm_resume,
-	.driver		= {
-		.name		= "sharpsl-pm",
-	},
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
-	return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
- 	platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index b2a781d9ce0..887c6eb3a18 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
 	writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
+/**
+ * struct vic_device - VIC PM device
+ * @sysdev: The system device which is registered.
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+struct vic_device {
+	struct sys_device sysdev;
+
+	void __iomem	*base;
+	int		irq;
+	u32		resume_sources;
+	u32		resume_irqs;
+	u32		int_select;
+	u32		int_enable;
+	u32		soft_int;
+	u32		protect;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static inline struct vic_device *to_vic(struct sys_device *sys)
+{
+	return container_of(sys, struct vic_device, sysdev);
+}
+
+static int vic_id;
+
+static int vic_class_resume(struct sys_device *dev)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+	/* re-initialise static settings */
+	vic_init2(base);
+
+	writel(vic->int_select, base + VIC_INT_SELECT);
+	writel(vic->protect, base + VIC_PROTECT);
+
+	/* set the enabled ints and then clear the non-enabled */
+	writel(vic->int_enable, base + VIC_INT_ENABLE);
+	writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+	/* and the same for the soft-int register */
+
+	writel(vic->soft_int, base + VIC_INT_SOFT);
+	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+
+	return 0;
+}
+
+static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct vic_device *vic = to_vic(dev);
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+	vic->int_select = readl(base + VIC_INT_SELECT);
+	vic->int_enable = readl(base + VIC_INT_ENABLE);
+	vic->soft_int = readl(base + VIC_INT_SOFT);
+	vic->protect = readl(base + VIC_PROTECT);
+
+	/* set the interrupts (if any) that are used for
+	 * resuming the system */
+
+	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+
+	return 0;
+}
+
+struct sysdev_class vic_class = {
+	.name		= "vic",
+	.suspend	= vic_class_suspend,
+	.resume		= vic_class_resume,
+};
+
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+	struct vic_device *v;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices))
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+	else {
+		v = &vic_devices[vic_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		vic_id++;
+	}
+}
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+	struct vic_device *dev = vic_devices;
+	int err;
+	int id;
+
+	if (vic_id == 0)
+		return 0;
+
+	err = sysdev_class_register(&vic_class);
+	if (err) {
+		printk(KERN_ERR "%s: cannot register class\n", __func__);
+		return err;
+	}
+
+	for (id = 0; id < vic_id; id++, dev++) {
+		dev->sysdev.id = id;
+		dev->sysdev.cls = &vic_class;
+
+		err = sysdev_register(&dev->sysdev);
+		if (err) {
+			printk(KERN_ERR "%s: failed to register device\n",
+			       __func__);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(vic_pm_init);
+
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+        struct vic_device *v = vic_devices;
+	unsigned int base_irq = irq & ~31;
+	int id;
+
+	for (id = 0; id < vic_id; id++, v++) {
+		if (v->irq == base_irq)
+			return v;
+	}
+
+	return NULL;
+}
+
+static int vic_set_wake(unsigned int irq, unsigned int on)
+{
+	struct vic_device *v = vic_from_irq(irq);
+	unsigned int off = irq & 31;
+
+	if (!v)
+		return -EINVAL;
+
+	if (on)
+		v->resume_irqs |= 1 << off;
+	else
+		v->resume_irqs &= ~(1 << off);
+
+	return 0;
+}
+
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
 	.ack	= vic_mask_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
+	.set_wake = vic_set_wake,
 };
 
 /**
@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
  * @base: iomem base address
  * @irq_start: starting interrupt number, must be muliple of 32
  * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
  */
 void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources)
+		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
 
@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
 
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	vic_init2(base);
 
 	for (i = 0; i < 32; i++) {
 		if (vic_sources & (1 << i)) {
@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
+
+	vic_pm_register(base, irq_start, resume_sources);
 }
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 227da0843ea..d18d21bb41e 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc3
-# Tue Aug 19 11:26:54 2008
+# Linux kernel version: 2.6.30-rc8
+# Thu Jun  4 09:53:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -44,15 +42,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -61,31 +68,37 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -93,19 +106,13 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -113,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -133,7 +137,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -143,10 +147,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -167,14 +171,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -187,16 +194,24 @@ CONFIG_CPU_PXA300=y
 # CONFIG_CPU_PXA310 is not set
 # CONFIG_CPU_PXA320 is not set
 # CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
 # CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
 # CONFIG_MACH_TAVOREVB is not set
@@ -204,19 +219,15 @@ CONFIG_CPU_PXA300=y
 # CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
 # CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
 # CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
 # CONFIG_PXA_EZX is not set
 CONFIG_PXA3xx=y
 # CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
@@ -241,6 +252,7 @@ CONFIG_IO_36=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_XSC3L2=y
 CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -256,25 +268,33 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -287,7 +307,7 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
@@ -304,6 +324,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -320,6 +341,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -376,6 +399,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -385,7 +409,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -407,8 +433,7 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
@@ -416,19 +441,15 @@ CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,6 +474,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,7 +516,6 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -516,16 +537,23 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -585,11 +613,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -604,11 +636,17 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -624,10 +662,13 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -677,18 +718,21 @@ CONFIG_KEYBOARD_PXA27x=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -721,10 +765,10 @@ CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -763,12 +807,8 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -782,6 +822,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -798,12 +842,14 @@ CONFIG_GPIO_PCA953X=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -811,12 +857,19 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -842,6 +895,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -862,12 +916,15 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 # CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -899,9 +956,11 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -916,12 +975,15 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
 # CONFIG_SND_PXA2XX_AC97 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -932,9 +994,39 @@ CONFIG_HID_DEBUG=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -952,11 +1044,14 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -965,6 +1060,7 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_MUSB_HDRC is not set
 
 #
@@ -973,20 +1069,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -994,7 +1090,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1015,6 +1110,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1022,7 +1118,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1031,13 +1126,20 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1045,10 +1147,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1057,7 +1161,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1065,7 +1172,13 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1096,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1105,28 +1219,27 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1135,15 +1248,18 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1153,6 +1269,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1173,15 +1294,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1201,6 +1320,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1209,6 +1329,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1313,6 +1434,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1329,6 +1451,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
@@ -1336,22 +1459,38 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1363,17 +1502,28 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1442,15 +1592,21 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1460,7 +1616,10 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index eb2738b5be5..ac18662f38c 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
 
 #
 # TI DaVinci Implementations
@@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y
 # DaVinci Core Type
 #
 CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
 
 #
 # DaVinci Board Type
 #
 CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -245,7 +252,7 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1778,6 +1790,7 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 3f89d5f25bc..3fb083b81b0 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,12 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:24 2006
+# Linux kernel version: 2.6.30-rc3
+# Tue May 19 12:26:49 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -15,42 +22,54 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -58,31 +77,38 @@ CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -96,6 +122,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -105,29 +132,40 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 
 #
@@ -138,14 +176,24 @@ CONFIG_CRUNCH=y
 #
 # EP93xx Platforms
 #
+# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
+CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
 CONFIG_MACH_ADSSPHERE=y
+CONFIG_MACH_EDB93XX=y
+CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
-CONFIG_MACH_EDB9302A=y
+CONFIG_MACH_EDB9307=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
-CONFIG_MACH_EDB9315A=y
 CONFIG_MACH_GESBC9312=y
+CONFIG_MACH_MICRO9=y
+CONFIG_MACH_MICRO9H=y
+CONFIG_MACH_MICRO9M=y
+CONFIG_MACH_MICRO9L=y
 CONFIG_MACH_TS72XX=y
+CONFIG_EP93XX_EARLY_UART1=y
+# CONFIG_EP93XX_EARLY_UART2 is not set
+# CONFIG_EP93XX_EARLY_UART3 is not set
 
 #
 # Processor Type
@@ -154,6 +202,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
@@ -168,34 +217,47 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
 #
 CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -205,6 +267,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -221,32 +289,31 @@ CONFIG_FPE_NWFPE_XP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -267,6 +334,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
@@ -289,25 +358,15 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -317,20 +376,28 @@ CONFIG_IPV6=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -339,41 +406,39 @@ CONFIG_IPV6=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -404,16 +469,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -431,49 +493,58 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_TS7250=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_TS7250 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
 #
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -495,6 +566,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -502,92 +574,71 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_EP93XX_ETH=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -605,6 +656,7 @@ CONFIG_EP93XX_ETH=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -621,104 +673,101 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# TPM devices
+# I2C Hardware Bus support
 #
-# CONFIG_TCG_TPM is not set
 
 #
-# I2C support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
 
 #
-# I2C Algorithms
+# External I2C/SMBus adapter drivers
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
-# I2C Hardware Bus support
+# Other I2C/SMBus bus drivers
 #
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# I2C GPIO expanders:
 #
-# CONFIG_W1 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
-# Hardware Monitoring support
+# PCI GPIO expanders:
 #
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -732,158 +781,188 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -895,6 +974,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -902,16 +982,23 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -920,38 +1007,34 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -965,24 +1048,55 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
 #
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
 CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -991,27 +1105,31 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1032,16 +1150,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1049,33 +1164,35 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -1087,7 +1204,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1109,10 +1225,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1153,49 +1266,83 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1204,21 +1351,115 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index dcf8153a947..0a1abb978d7 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
+CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y
@@ -270,7 +271,9 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index f56837f69ca..957fd5fa27c 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 # CONFIG_MACH_CM_X300 is not set
+CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
 # CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
@@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
+CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
 # CONFIG_TPS65010 is not set
@@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
+CONFIG_FB_W100=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
new file mode 100644
index 00000000000..4b04290d8e8
--- /dev/null
+++ b/arch/arm/configs/mx21_defconfig
@@ -0,0 +1,1170 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
new file mode 100644
index 00000000000..28be17fbc15
--- /dev/null
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -0,0 +1,1528 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 18 14:01:52 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
new file mode 100644
index 00000000000..23e43ea4efa
--- /dev/null
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -0,0 +1,866 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc7
+# Tue Jun  9 12:36:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_4430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_HAVE_MLOCK=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
new file mode 100644
index 00000000000..213fe9c5eaa
--- /dev/null
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -0,0 +1,1211 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 5b98f764511..9e2385293ec 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 593102da8cd..eb2cb31825c 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
new file mode 100644
index 00000000000..44461f197a1
--- /dev/null
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -0,0 +1,1141 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 02:44:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+# CONFIG_ARCH_STMP37XX is not set
+CONFIG_ARCH_STMP378X=y
+# CONFIG_MACH_STMP37XX is not set
+CONFIG_MACH_STMP378X=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# RDS decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_SELFTEST=y
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_KOBJECT=y
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
new file mode 100644
index 00000000000..401279d531d
--- /dev/null
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -0,0 +1,1002 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29.1
+# Mon Apr 20 04:41:26 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+CONFIG_ARCH_STMP37XX=y
+# CONFIG_ARCH_STMP378X is not set
+CONFIG_MACH_STMP37XX=y
+# CONFIG_MACH_STMP378X is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_STMP_DBG is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
new file mode 100644
index 00000000000..2d827e12114
--- /dev/null
+++ b/arch/arm/configs/u300_defconfig
@@ -0,0 +1,1115 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Mon Jun  1 09:18:22 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_U300=y
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# ST-Ericsson AB U300/U330/U335/U365 Platform
+#
+
+#
+# ST-Ericsson Mobile Platform Products
+#
+CONFIG_MACH_U300=y
+
+#
+# ST-Ericsson U300/U330/U335/U365 Feature Selections
+#
+# CONFIG_MACH_U300_BS2X is not set
+# CONFIG_MACH_U300_BS330 is not set
+CONFIG_MACH_U300_BS335=y
+# CONFIG_MACH_U300_BS365 is not set
+# CONFIG_MACH_U300_SINGLE_RAM is not set
+CONFIG_MACH_U300_DUAL_RAM=y
+CONFIG_U300_DEBUG=y
+# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+
+#
+# All the settings below must match the bootloader's settings
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/w90p910_defconfig
index 56bda7c6d67..5245655a0ad 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/w90p910_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8-git8
-# Sat Nov 15 10:05:00 2008
+# Linux kernel version: 2.6.30
+# Wed Jun 10 22:09:25 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -42,10 +40,19 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -56,52 +63,53 @@ CONFIG_USER_NS=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -127,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -151,23 +159,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_W90X900=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_CPU_W90P910=y
 
 #
@@ -198,6 +200,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -209,27 +212,32 @@ CONFIG_ARM_THUMB=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -237,12 +245,17 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 initrd=0xa00000,4000000 mem=64M"
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -258,6 +271,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -282,11 +297,93 @@ CONFIG_FW_LOADER=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
@@ -300,9 +397,41 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 
@@ -354,38 +483,57 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_W90X900=y
-# CONFIG_SERIAL_W90X900_PORT1 is not set
-# CONFIG_SERIAL_W90X900_PORT2 is not set
-# CONFIG_SERIAL_W90X900_PORT3 is not set
-# CONFIG_SERIAL_W90X900_PORT4 is not set
-CONFIG_SERIAL_W90X900_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -393,10 +541,11 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
@@ -433,33 +582,131 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -469,6 +716,11 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -486,15 +738,13 @@ CONFIG_GENERIC_ACL=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -502,15 +752,22 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -586,18 +843,36 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -605,14 +880,15 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -620,7 +896,10 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index bb7d695f390..1a711ea8418 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -429,6 +429,14 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 		__flush_anon_page(vma, page, vmaddr);
 }
 
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	/* highmem pages are always flushed upon kunmap already */
+	if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
+		__cpuc_flush_dcache_page(page_address(page));
+}
+
 #define flush_dcache_mmap_lock(mapping) \
 	spin_lock_irq(&(mapping)->tree_lock)
 #define flush_dcache_mmap_unlock(mapping) \
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 7b9d27e749b..b3e656c6fb7 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -8,6 +8,21 @@
 #define CPUID_TCM	2
 #define CPUID_TLBTYPE	3
 
+#define CPUID_EXT_PFR0	"c1, 0"
+#define CPUID_EXT_PFR1	"c1, 1"
+#define CPUID_EXT_DFR0	"c1, 2"
+#define CPUID_EXT_AFR0	"c1, 3"
+#define CPUID_EXT_MMFR0	"c1, 4"
+#define CPUID_EXT_MMFR1	"c1, 5"
+#define CPUID_EXT_MMFR2	"c1, 6"
+#define CPUID_EXT_MMFR3	"c1, 7"
+#define CPUID_EXT_ISAR0	"c2, 0"
+#define CPUID_EXT_ISAR1	"c2, 1"
+#define CPUID_EXT_ISAR2	"c2, 2"
+#define CPUID_EXT_ISAR3	"c2, 3"
+#define CPUID_EXT_ISAR4	"c2, 4"
+#define CPUID_EXT_ISAR5	"c2, 5"
+
 #ifdef CONFIG_CPU_CP15
 #define read_cpuid(reg)							\
 	({								\
@@ -18,9 +33,19 @@
 		    : "cc");						\
 		__val;							\
 	})
+#define read_cpuid_ext(ext_reg)						\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, " ext_reg		\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
 #else
 extern unsigned int processor_id;
 #define read_cpuid(reg) (processor_id)
+#define read_cpuid_ext(reg) 0
 #endif
 
 /*
diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
deleted file mode 100644
index e521b70713c..00000000000
--- a/arch/arm/include/asm/hardware/arm_twd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
-#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 64f2252a25c..cdb9022716f 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -24,6 +24,8 @@
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
+#define L2X0_TAG_LATENCY_CTRL		0x108
+#define L2X0_DATA_LATENCY_CTRL		0x10C
 #define L2X0_EVENT_CNT_CTRL		0x200
 #define L2X0_EVENT_CNT1_CFG		0x204
 #define L2X0_EVENT_CNT0_CFG		0x208
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
new file mode 100644
index 00000000000..6a6c66be7f6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -0,0 +1,138 @@
+/* arch/arm/include/asm/hardware/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra controll register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#define PL080_INT_STATUS			(0x00)
+#define PL080_TC_STATUS				(0x04)
+#define PL080_TC_CLEAR				(0x08)
+#define PL080_ERR_STATUS			(0x0C)
+#define PL080_ERR_CLEAR				(0x10)
+#define PL080_RAW_TC_STATUS			(0x14)
+#define PL080_RAW_ERR_STATUS			(0x18)
+#define PL080_EN_CHAN				(0x1c)
+#define PL080_SOFT_BREQ				(0x20)
+#define PL080_SOFT_SREQ				(0x24)
+#define PL080_SOFT_LBREQ			(0x28)
+#define PL080_SOFT_LSREQ			(0x2C)
+
+#define PL080_CONFIG				(0x30)
+#define PL080_CONFIG_M2_BE			(1 << 2)
+#define PL080_CONFIG_M1_BE			(1 << 1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_SYNC				(0x34)
+
+/* Per channel configuration registers */
+
+#define PL008_Cx_STRIDE				(0x20)
+#define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x)				((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x)			((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x)			((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x)			((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR			(0x00)
+#define PL080_CH_DST_ADDR			(0x04)
+#define PL080_CH_LLI				(0x08)
+#define PL080_CH_CONTROL			(0x0C)
+#define PL080_CH_CONFIG				(0x10)
+#define PL080S_CH_CONTROL2			(0x10)
+#define PL080S_CH_CONFIG			(0x14)
+
+#define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT			(2)
+#define PL080_LLI_LM_AHB2			(1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
+#define PL080_CONTROL_PROT_MASK			(0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT		(28)
+#define PL080_CONTROL_PROT_SYS			(1 << 28)
+#define PL080_CONTROL_DST_INCR			(1 << 27)
+#define PL080_CONTROL_SRC_INCR			(1 << 26)
+#define PL080_CONTROL_DST_AHB2			(1 << 25)
+#define PL080_CONTROL_SRC_AHB2			(1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT		(21)
+#define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT		(18)
+#define PL080_CONTROL_DB_SIZE_MASK		(0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT		(15)
+#define PL080_CONTROL_SB_SIZE_MASK		(0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT		(12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK	(0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)
+
+#define PL080_BSIZE_1				(0x0)
+#define PL080_BSIZE_4				(0x1)
+#define PL080_BSIZE_8				(0x2)
+#define PL080_BSIZE_16				(0x3)
+#define PL080_BSIZE_32				(0x4)
+#define PL080_BSIZE_64				(0x5)
+#define PL080_BSIZE_128				(0x6)
+#define PL080_BSIZE_256				(0x7)
+
+#define PL080_WIDTH_8BIT			(0x0)
+#define PL080_WIDTH_16BIT			(0x1)
+#define PL080_WIDTH_32BIT			(0x2)
+
+#define PL080_CONFIG_HALT			(1 << 18)
+#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
+#define PL080_CONFIG_LOCK			(1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
+#define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT		(6)
+#define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT		(1)
+#define PL080_CONFIG_ENABLE			(1 << 0)
+
+#define PL080_FLOW_MEM2MEM			(0x0)
+#define PL080_FLOW_MEM2PER			(0x1)
+#define PL080_FLOW_PER2MEM			(0x2)
+#define PL080_FLOW_SRC2DST			(0x3)
+#define PL080_FLOW_SRC2DST_DST			(0x4)
+#define PL080_FLOW_MEM2PER_PER			(0x5)
+#define PL080_FLOW_PER2MEM_PER			(0x6)
+#define PL080_FLOW_SRC2DST_SRC			(0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+};
+
+struct pl080s_lli {
+	u32	src_addr;
+	u32	dst_addr;
+	u32	next_lli;
+	u32	control0;
+	u32	control1;
+};
+
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index f87328d4a18..5d72550a809 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,7 @@
 #define VIC_PL192_VECT_ADDR		0xF00
 
 #ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
new file mode 100644
index 00000000000..50c7e7cfd67
--- /dev/null
+++ b/arch/arm/include/asm/localtimer.h
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/include/asm/localtimer.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_LOCALTIMER_H
+#define __ASM_ARM_LOCALTIMER_H
+
+struct clock_event_device;
+
+/*
+ * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
+ */
+void percpu_timer_setup(void);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#ifdef CONFIG_HAVE_ARM_TWD
+
+#include "smp_twd.h"
+
+#define local_timer_ack()	twd_timer_ack()
+#define local_timer_stop()	twd_timer_stop()
+
+#else
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ.
+ * Returns true if the local timer IRQ is to be processed.
+ */
+int local_timer_ack(void);
+
+/*
+ * Stop a local timer interrupt.
+ */
+void local_timer_stop(void);
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+void local_timer_setup(struct clock_event_device *);
+
+#else
+
+static inline void local_timer_stop(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 58cf91f38e6..742c2aaeb02 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -30,6 +30,14 @@ struct map_desc {
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+			const struct mem_type *mtype);
 #else
 #define iotable_init(map,num)	do { } while (0)
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 110295c5461..1cd2d6416bd 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 	return __va(ptr);
 }
 
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
 /*
  * Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 1845892260e..6a89567ffc5 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -71,6 +71,7 @@ struct thread_struct {
 		regs->ARM_cpsr = USR26_MODE;				\
 	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
 		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_cpsr |= PSR_ENDSTATE;					\
 	regs->ARM_pc = pc & ~1;		/* pc */			\
 	regs->ARM_sp = sp;		/* sp */			\
 	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 236a06b9b7c..67b833c9b6b 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -50,6 +50,7 @@
 #define PSR_F_BIT	0x00000040
 #define PSR_I_BIT	0x00000080
 #define PSR_A_BIT	0x00000100
+#define PSR_E_BIT	0x00000200
 #define PSR_J_BIT	0x01000000
 #define PSR_Q_BIT	0x08000000
 #define PSR_V_BIT	0x10000000
@@ -65,6 +66,22 @@
 #define PSR_x		0x0000ff00	/* Extension		*/
 #define PSR_c		0x000000ff	/* Control		*/
 
+/*
+ * ARMv7 groups of APSR bits
+ */
+#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
+#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE	PSR_E_BIT
+#else
+#define PSR_ENDSTATE	0
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index ada93a8fc2e..4fc1565e4f9 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -29,6 +29,7 @@
 #define SZ_512				0x00000200
 
 #define SZ_1K                           0x00000400
+#define SZ_2K                           0x00000800
 #define SZ_4K                           0x00001000
 #define SZ_8K                           0x00002000
 #define SZ_16K                          0x00004000
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 5995935338e..a06e735b262 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p);
 asmlinkage void do_IPI(struct pt_regs *regs);
 
 /*
- * Setup the SMP cpu_possible_map
+ * Setup the set of possible CPUs (via set_cpu_possible)
  */
 extern void smp_init_cpus(void);
 
@@ -56,11 +56,6 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 extern void smp_cross_call(const struct cpumask *mask);
 
 /*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(const struct cpumask *mask);
-
-/*
  * Boot a secondary CPU, and assign it the specified idle task.
  * This also gives us the initial stack to use for this CPU.
  */
@@ -101,43 +96,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 #define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(void);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(void);
-
-/*
  * show local interrupt info
  */
 extern void show_local_irqs(struct seq_file *);
 
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
new file mode 100644
index 00000000000..2376835015d
--- /dev/null
+++ b/arch/arm/include/asm/smp_scu.h
@@ -0,0 +1,7 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
+
+#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
new file mode 100644
index 00000000000..7be0978b262
--- /dev/null
+++ b/arch/arm/include/asm/smp_twd.h
@@ -0,0 +1,12 @@
+#ifndef __ASMARM_SMP_TWD_H
+#define __ASMARM_SMP_TWD_H
+
+struct clock_event_device;
+
+extern void __iomem *twd_base;
+
+void twd_timer_stop(void);
+int twd_timer_ack(void);
+void twd_timer_setup(struct clock_event_device *);
+
+#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a62218013c7..c964f3fc3bc 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -40,6 +40,12 @@
 #define TLB_V6_I_ASID	(1 << 18)
 
 #define TLB_BTB		(1 << 28)
+
+/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
+#define TLB_V7_UIS_PAGE	(1 << 19)
+#define TLB_V7_UIS_FULL (1 << 20)
+#define TLB_V7_UIS_ASID (1 << 21)
+
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
 #define TLB_DCLEAN	(1 << 30)
 #define TLB_WB		(1 << 31)
@@ -176,9 +182,17 @@
 # define v6wbi_always_flags	(-1UL)
 #endif
 
+#ifdef CONFIG_SMP
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
+#else
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
+#endif
+
 #ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags	v6wbi_tlb_flags
-# define v7wbi_always_flags	v6wbi_tlb_flags
+# define v7wbi_possible_flags	v7wbi_tlb_flags
+# define v7wbi_always_flags	v7wbi_tlb_flags
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
@@ -316,6 +330,8 @@ static inline void local_flush_tlb_all(void)
 		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
 	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
 		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V7_UIS_FULL))
+		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -351,6 +367,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V7_UIS_ASID))
+		asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -389,6 +407,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V7_UIS_PAGE))
+		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -424,6 +444,8 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V7_UIS_PAGE))
+		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 7897464e0c2..0da9bc9b3b1 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -386,7 +386,9 @@ do {									\
 #ifdef CONFIG_MMU
 extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
 extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n);
 extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
 #else
 #define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
 #define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 11a5197a221..ff89d0b3abc 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
+obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 83b1da6b7ba..fc8af43c500 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -482,6 +482,9 @@ __und_usr:
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r0, r0				@ little endian instruction
+#endif
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index b55cb033180..366e5097a41 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -210,6 +210,9 @@ ENTRY(vector_swi)
   A710(	teq	ip, #0x0f000000						)
   A710(	bne	.Larm710bug						)
 #endif
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	rev	r10, r10			@ little endian instruction
+#endif
 
 #elif defined(CONFIG_AEABI)
 
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index e859af34946..3f470866bb8 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -14,10 +14,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c3265a2e7cd..1585423699e 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -365,7 +365,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)do_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 80b8b5c7e07..93bb4247b7e 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -426,9 +426,13 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka,
 		 */
 		thumb = handler & 1;
 
-		if (thumb)
+		if (thumb) {
 			cpsr |= PSR_T_BIT;
-		else
+#if __LINUX_ARM_ARCH__ >= 7
+			/* clear the If-Then Thumb-2 execution state */
+			cpsr &= ~PSR_IT_MASK;
+#endif
+		} else
 			cpsr &= ~PSR_T_BIT;
 	}
 #endif
@@ -532,7 +536,7 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
 	return err;
 }
 
-static inline void restart_syscall(struct pt_regs *regs)
+static inline void setup_syscall_restart(struct pt_regs *regs)
 {
 	regs->ARM_r0 = regs->ARM_ORIG_r0;
 	regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
@@ -567,7 +571,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 			}
 			/* fallthrough */
 		case -ERESTARTNOINTR:
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 
@@ -691,7 +695,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 		if (regs->ARM_r0 == -ERESTARTNOHAND ||
 		    regs->ARM_r0 == -ERESTARTSYS ||
 		    regs->ARM_r0 == -ERESTARTNOINTR) {
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 	single_step_set(current);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 6014dfd22af..de885fd256c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -22,16 +22,20 @@
 #include <linux/smp.h>
 #include <linux/seq_file.h>
 #include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/cputype.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
+#include <asm/localtimer.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -163,7 +167,7 @@ int __cpuexit __cpu_disable(void)
 	 * Take this CPU offline.  Once we clear this, we can't return,
 	 * and we must not schedule until we're ready to give up the cpu.
 	 */
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 
 	/*
 	 * OK - migrate IRQs away from this CPU
@@ -274,9 +278,9 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	local_fiq_enable();
 
 	/*
-	 * Setup local timer for this CPU.
+	 * Setup the percpu timer for this CPU.
 	 */
-	local_timer_setup();
+	percpu_timer_setup();
 
 	calibrate_delay();
 
@@ -285,7 +289,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	/*
 	 * OK, now it's safe to let the boot CPU continue
 	 */
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
 
 	/*
 	 * OK, it's off to the idle thread for us
@@ -383,10 +387,16 @@ void show_local_irqs(struct seq_file *p)
 	seq_putc(p, '\n');
 }
 
+/*
+ * Timer (local or broadcast) support
+ */
+static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
+
 static void ipi_timer(void)
 {
+	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
 	irq_enter();
-	local_timer_interrupt();
+	evt->event_handler(evt);
 	irq_exit();
 }
 
@@ -405,6 +415,42 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 }
 #endif
 
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+static void smp_timer_broadcast(const struct cpumask *mask)
+{
+	send_ipi_message(mask, IPI_TIMER);
+}
+
+static void broadcast_timer_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *evt)
+{
+}
+
+static void local_timer_setup(struct clock_event_device *evt)
+{
+	evt->name	= "dummy_timer";
+	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
+			  CLOCK_EVT_FEAT_PERIODIC |
+			  CLOCK_EVT_FEAT_DUMMY;
+	evt->rating	= 400;
+	evt->mult	= 1;
+	evt->set_mode	= broadcast_timer_set_mode;
+	evt->broadcast	= smp_timer_broadcast;
+
+	clockevents_register_device(evt);
+}
+#endif
+
+void __cpuinit percpu_timer_setup(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+	evt->cpumask = cpumask_of(cpu);
+
+	local_timer_setup(evt);
+}
+
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
@@ -417,7 +463,7 @@ static void ipi_cpu_stop(unsigned int cpu)
 	dump_stack();
 	spin_unlock(&stop_lock);
 
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 
 	local_fiq_disable();
 	local_irq_disable();
@@ -501,11 +547,6 @@ void smp_send_reschedule(int cpu)
 	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
-void smp_timer_broadcast(const struct cpumask *mask)
-{
-	send_ipi_message(mask, IPI_TIMER);
-}
-
 void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
@@ -545,6 +586,12 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
@@ -587,51 +634,61 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	if (tlb_ops_need_broadcast())
+		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	else
+		local_flush_tlb_all();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast())
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+	else
+		local_flush_tlb_mm(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
-	struct tlb_args ta;
-
-	ta.ta_vma = vma;
-	ta.ta_start = uaddr;
-
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = uaddr;
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	} else
+		local_flush_tlb_page(vma, uaddr);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
 {
-	struct tlb_args ta;
-
-	ta.ta_start = kaddr;
-
-	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = kaddr;
+		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	} else
+		local_flush_tlb_kernel_page(kaddr);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
                      unsigned long start, unsigned long end)
 {
-	struct tlb_args ta;
-
-	ta.ta_vma = vma;
-	ta.ta_start = start;
-	ta.ta_end = end;
-
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+	} else
+		local_flush_tlb_range(vma, start, end);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	struct tlb_args ta;
-
-	ta.ta_start = start;
-	ta.ta_end = end;
-
-	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	} else
+		local_flush_tlb_kernel_range(start, end);
 }
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
new file mode 100644
index 00000000000..d3831f616ee
--- /dev/null
+++ b/arch/arm/kernel/smp_scu.c
@@ -0,0 +1,48 @@
+/*
+ *  linux/arch/arm/kernel/smp_scu.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#define SCU_CTRL		0x00
+#define SCU_CONFIG		0x04
+#define SCU_CPU_STATUS		0x08
+#define SCU_INVALIDATE		0x0c
+#define SCU_FPGA_REVISION	0x10
+
+/*
+ * Get the number of CPU cores from the SCU configuration
+ */
+unsigned int __init scu_get_core_count(void __iomem *scu_base)
+{
+	unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+	return (ncores & 0x03) + 1;
+}
+
+/*
+ * Enable the SCU
+ */
+void __init scu_enable(void __iomem *scu_base)
+{
+	u32 scu_ctrl;
+
+	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	scu_ctrl |= 1;
+	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+
+	/*
+	 * Ensure that the data accessed by CPU0 before the SCU was
+	 * initialised is visible to the other CPUs.
+	 */
+	flush_cache_all();
+}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
new file mode 100644
index 00000000000..d8c88c633c6
--- /dev/null
+++ b/arch/arm/kernel/smp_twd.c
@@ -0,0 +1,175 @@
+/*
+ *  linux/arch/arm/kernel/smp_twd.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/smp_twd.h>
+#include <asm/hardware/gic.h>
+
+#define TWD_TIMER_LOAD 			0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
+
+/* set up by the platform code */
+void __iomem *twd_base;
+
+static unsigned long twd_timer_rate;
+
+static void twd_set_mode(enum clock_event_mode mode,
+			struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* timer load already set up */
+		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
+			| TWD_TIMER_CONTROL_PERIODIC;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+}
+
+static int twd_set_next_event(unsigned long evt,
+			struct clock_event_device *unused)
+{
+	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+
+	ctrl |= TWD_TIMER_CONTROL_ENABLE;
+
+	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+
+	return 0;
+}
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occurred, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int twd_timer_ack(void)
+{
+	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __cpuinit twd_calibrate_rate(void)
+{
+	unsigned long load, count;
+	u64 waitjiffies;
+
+	/*
+	 * If this is the first time round, we need to work out how fast
+	 * the timer ticks
+	 */
+	if (twd_timer_rate == 0) {
+		printk(KERN_INFO "Calibrating local timer... ");
+
+		/* Wait for a tick to start */
+		waitjiffies = get_jiffies_64() + 1;
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		/* OK, now the tick has started, let's get the timer going */
+		waitjiffies += 5;
+
+				 /* enable, no interrupt or reload */
+		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+
+				 /* maximum value */
+		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+
+		while (get_jiffies_64() < waitjiffies)
+			udelay(10);
+
+		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+
+		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
+			(twd_timer_rate / 100000) % 100);
+	}
+
+	load = twd_timer_rate / HZ;
+
+	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
+}
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+{
+	unsigned long flags;
+
+	twd_calibrate_rate();
+
+	clk->name = "local_timer";
+	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	clk->rating = 350;
+	clk->set_mode = twd_set_mode;
+	clk->set_next_event = twd_set_next_event;
+	clk->shift = 20;
+	clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
+	clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
+	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+
+	/* Make sure our local interrupt controller has this enabled */
+	local_irq_save(flags);
+	get_irq_chip(clk->irq)->unmask(clk->irq);
+	local_irq_restore(flags);
+
+	clockevents_register_device(clk);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit twd_timer_stop(void)
+{
+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index c90f27250ea..6c077979254 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -141,6 +141,7 @@ SECTIONS
 
 	.data : AT(__data_loc) {
 		_data = .;		/* address in memory */
+		_sdata = .;
 
 		/*
 		 * first, the init task union, aligned
@@ -192,6 +193,7 @@ SECTIONS
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
 		*(COMMON)
+		__bss_stop = .;
 		_end = .;
 	}
 					/* Stabs debugging sections.	*/
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 866f84a586f..030ba7219f4 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -29,6 +29,9 @@ else
 endif
 endif
 
+# using lib_ here won't override already available weak symbols
+obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
+
 lib-$(CONFIG_MMU) += $(mmu-y)
 
 ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 4d6bc71231f..844f56785eb 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -18,7 +18,8 @@
  *          : sz   - number of bytes to clear
  * Returns  : number of bytes NOT cleared
  */
-ENTRY(__clear_user)
+ENTRY(__clear_user_std)
+WEAK(__clear_user)
 		stmfd	sp!, {r1, lr}
 		mov	r2, #0
 		cmp	r1, #4
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 22f968bbdff..878820f0a32 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -86,7 +86,8 @@
 
 	.text
 
-ENTRY(__copy_to_user)
+ENTRY(__copy_to_user_std)
+WEAK(__copy_to_user)
 
 #include "copy_template.S"
 
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
new file mode 100644
index 00000000000..6b967ffb655
--- /dev/null
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -0,0 +1,228 @@
+/*
+ *  linux/arch/arm/lib/uaccess_with_memcpy.c
+ *
+ *  Written by: Lennert Buytenhek and Nicolas Pitre
+ *  Copyright (C) 2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h> /* for in_atomic() */
+#include <asm/current.h>
+#include <asm/page.h>
+
+static int
+pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
+{
+	unsigned long addr = (unsigned long)_addr;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	spinlock_t *ptl;
+
+	pgd = pgd_offset(current->mm, addr);
+	if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
+		return 0;
+
+	pmd = pmd_offset(pgd, addr);
+	if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
+		return 0;
+
+	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
+	if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
+	    !pte_write(*pte) || !pte_dirty(*pte))) {
+		pte_unmap_unlock(pte, ptl);
+		return 0;
+	}
+
+	*ptep = pte;
+	*ptlp = ptl;
+
+	return 1;
+}
+
+static unsigned long noinline
+__copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
+{
+	int atomic;
+
+	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+		memcpy((void *)to, from, n);
+		return 0;
+	}
+
+	/* the mmap semaphore is taken only if not in an atomic context */
+	atomic = in_atomic();
+
+	if (!atomic)
+		down_read(&current->mm->mmap_sem);
+	while (n) {
+		pte_t *pte;
+		spinlock_t *ptl;
+		int tocopy;
+
+		while (!pin_page_for_write(to, &pte, &ptl)) {
+			if (!atomic)
+				up_read(&current->mm->mmap_sem);
+			if (__put_user(0, (char __user *)to))
+				goto out;
+			if (!atomic)
+				down_read(&current->mm->mmap_sem);
+		}
+
+		tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1;
+		if (tocopy > n)
+			tocopy = n;
+
+		memcpy((void *)to, from, tocopy);
+		to += tocopy;
+		from += tocopy;
+		n -= tocopy;
+
+		pte_unmap_unlock(pte, ptl);
+	}
+	if (!atomic)
+		up_read(&current->mm->mmap_sem);
+
+out:
+	return n;
+}
+
+unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	/*
+	 * This test is stubbed out of the main function above to keep
+	 * the overhead for small copies low by avoiding a large
+	 * register dump on the stack just to reload them right away.
+	 * With frame pointer disabled, tail call optimization kicks in
+	 * as well making this test almost invisible.
+	 */
+	if (n < 64)
+		return __copy_to_user_std(to, from, n);
+	return __copy_to_user_memcpy(to, from, n);
+}
+	
+static unsigned long noinline
+__clear_user_memset(void __user *addr, unsigned long n)
+{
+	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+		memset((void *)addr, 0, n);
+		return 0;
+	}
+
+	down_read(&current->mm->mmap_sem);
+	while (n) {
+		pte_t *pte;
+		spinlock_t *ptl;
+		int tocopy;
+
+		while (!pin_page_for_write(addr, &pte, &ptl)) {
+			up_read(&current->mm->mmap_sem);
+			if (__put_user(0, (char __user *)addr))
+				goto out;
+			down_read(&current->mm->mmap_sem);
+		}
+
+		tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1;
+		if (tocopy > n)
+			tocopy = n;
+
+		memset((void *)addr, 0, tocopy);
+		addr += tocopy;
+		n -= tocopy;
+
+		pte_unmap_unlock(pte, ptl);
+	}
+	up_read(&current->mm->mmap_sem);
+
+out:
+	return n;
+}
+
+unsigned long __clear_user(void __user *addr, unsigned long n)
+{
+	/* See rational for this in __copy_to_user() above. */
+	if (n < 64)
+		return __clear_user_std(addr, n);
+	return __clear_user_memset(addr, n);
+}
+
+#if 0
+
+/*
+ * This code is disabled by default, but kept around in case the chosen
+ * thresholds need to be revalidated.  Some overhead (small but still)
+ * would be implied by a runtime determined variable threshold, and
+ * so far the measurement on concerned targets didn't show a worthwhile
+ * variation.
+ *
+ * Note that a fairly precise sched_clock() implementation is needed
+ * for results to make some sense.
+ */
+
+#include <linux/vmalloc.h>
+
+static int __init test_size_treshold(void)
+{
+	struct page *src_page, *dst_page;
+	void *user_ptr, *kernel_ptr;
+	unsigned long long t0, t1, t2;
+	int size, ret;
+
+	ret = -ENOMEM;
+	src_page = alloc_page(GFP_KERNEL);
+	if (!src_page)
+		goto no_src;
+	dst_page = alloc_page(GFP_KERNEL);
+	if (!dst_page)
+		goto no_dst;
+	kernel_ptr = page_address(src_page);
+	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010));
+	if (!user_ptr)
+		goto no_vmap;
+
+	/* warm up the src page dcache */
+	ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE);
+
+	for (size = PAGE_SIZE; size >= 4; size /= 2) {
+		t0 = sched_clock();
+		ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size);
+		t1 = sched_clock();
+		ret |= __copy_to_user_std(user_ptr, kernel_ptr, size);
+		t2 = sched_clock();
+		printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+	}
+
+	for (size = PAGE_SIZE; size >= 4; size /= 2) {
+		t0 = sched_clock();
+		ret |= __clear_user_memset(user_ptr, size);
+		t1 = sched_clock();
+		ret |= __clear_user_std(user_ptr, size);
+		t2 = sched_clock();
+		printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+	}
+
+	if (ret)
+		ret = -EFAULT;
+
+	vunmap(user_ptr);
+no_vmap:
+	put_page(dst_page);
+no_dst:
+	put_page(src_page);
+no_src:
+	return ret;
+}
+
+subsys_initcall(test_size_treshold);
+
+#endif
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index e263fda3e2d..970fd6b6753 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
  * MCI (SD/MMC)
  */
 static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+	.det_pin 	= AT91_PIN_PC9,
+	.wp_pin 	= AT91_PIN_PC4,
 	.slot_b		= 1,
 	.wire4		= 1,
 };
@@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
 
 static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	}, {
 		I2C_BOARD_INFO("fm3130", 0x68),
 	}, {
 		I2C_BOARD_INFO("24c64", 0x50),
@@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));
+	/* Audio */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 }
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 438efbb1748..cc270beadd5 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -218,6 +218,13 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+	},
+};
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -235,7 +242,7 @@ static void __init ek_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* PCK0 provides MCLK to the WM8731 */
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index e4345106ee5..bac578fe0d3 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -43,6 +43,25 @@
 #define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
 
 
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi()		(  cpu_is_at91cap9() \
+				|| cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla()	(cpu_is_at91sam9g20())
+
+#define cpu_has_pllb()		(!cpu_is_at91sam9rl())
+
+#define cpu_has_upll()		(0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp()		(!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs()		(!cpu_is_at91sam9rl())
+
+
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
 
@@ -140,7 +159,7 @@ static struct clk utmi_clk = {
 };
 static struct clk uhpck = {
 	.name		= "uhpck",
-	.parent		= &pllb,
+	/*.parent		= ... we choose parent at runtime */
 	.mode		= pmc_sys_mode,
 };
 
@@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
 		case AT91_PMC_CSS_PLLA:
 			return &plla;
 		case AT91_PMC_CSS_PLLB:
-			return &pllb;
+			if (cpu_has_upll())
+				/* CSS_PLLB == CSS_UPLL */
+				return &utmi_clk;
+			else if (cpu_has_pllb())
+				return &pllb;
 	}
 
 	return NULL;
@@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 			u32	pckr;
 
 			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-			pckr &= AT91_PMC_CSS_PLLB;	/* clock selection */
+			pckr &= AT91_PMC_CSS;	/* clock selection */
 			pckr |= prescale << 2;
 			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
 			clk->rate_hz = actual;
@@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 }
 EXPORT_SYMBOL(clk_set_parent);
 
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
 static void __init init_programmable_clock(struct clk *clk)
 {
 	struct clk	*parent;
@@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
 	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
 	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
-	if (!cpu_is_at91sam9rl())
+	if (cpu_has_pllb())
 		seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+	if (cpu_has_utmi())
 		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+	if (cpu_has_upll())
+		seq_printf(s, "USB  = %8x\n", at91_sys_read(AT91_PMC_USB));
 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
 
 	seq_printf(s, "\n");
@@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = {
 	&clk32k,
 	&main_clk,
 	&plla,
-	&pllb,
-
-	/* PLLB children (USB) */
-	&udpck,
-	&uhpck,
 
 	/* MCK */
 	&mck
 };
 
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+	/*
+	 * USB clock init:  choose 48 MHz PLLB value,
+	 * disable 48MHz clock during usb peripheral suspend.
+	 *
+	 * REVISIT:  assumes MCK doesn't derive from PLLB!
+	 */
+	uhpck.parent = &pllb;
+
+	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+	if (cpu_is_at91rm9200()) {
+		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+		udpck.pmc_mask = AT91RM9200_PMC_UDP;
+		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+	} else if (cpu_is_at91cap9()) {
+		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+	}
+	at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+	/*
+	 * USB clock init: choose 480 MHz from UPLL,
+	 */
+	unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+	/* Setup divider by 10 to reach 48 MHz */
+	usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+	at91_sys_write(AT91_PMC_USB, usbr);
+
+	/* Now set uhpck values */
+	uhpck.parent = &utmi_clk;
+	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+	uhpck.rate_hz = utmi_clk.parent->rate_hz;
+	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
 int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
@@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
-	   || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+	if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+	   || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
-	/*
-	 * USB clock init:  choose 48 MHz PLLB value,
-	 * disable 48MHz clock during usb peripheral suspend.
-	 *
-	 * REVISIT:  assumes MCK doesn't derive from PLLB!
-	 */
-	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
-	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
-	if (cpu_is_at91rm9200()) {
-		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
-		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
-		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-	} else if (cpu_is_at91cap9()) {
-		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+	if (cpu_has_upll() && !cpu_has_pllb()) {
+		/* setup UTMI clock as the fourth primary clock
+		 * (instead of pllb) */
+		utmi_clk.type |= CLK_TYPE_PRIMARY;
+		utmi_clk.id = 3;
 	}
-	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
-	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 
 	/*
 	 * USB HS clock init
 	 */
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+	if (cpu_has_utmi())
 		/*
 		 * multiplier is hard-wired to 40
 		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
 		 */
 		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-	}
+
+	/*
+	 * USB FS clock init
+	 */
+	if (cpu_has_pllb())
+		at91_pllb_usbfs_clock_init(main_clock);
+	if (cpu_has_upll())
+		/* assumes that we choose UPLL for USB and not PLLA */
+		at91_upll_usbfs_clock_init(main_clock);
 
 	/*
 	 * MCK and CPU derive from one of those primary clocks.
@@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock)
 	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
 	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));				/* prescale */
-	if (cpu_is_at91rm9200())
+	if (cpu_is_at91rm9200()) {
 		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
-	else if (cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9g20()) {
 		mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
-	} else
+	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
+	}
 
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
 		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
 
-	if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+	if (cpu_has_pllb())
+		list_add_tail(&pllb.node, &clocks);
+
+	if (cpu_has_uhp())
+		list_add_tail(&uhpck.node, &clocks);
+
+	if (cpu_has_udpfs())
+		list_add_tail(&udpck.node, &clocks);
+
+	if (cpu_has_utmi())
 		list_add_tail(&utmi_clk.node, &clocks);
 
 	/* MCK and CPU clock are "always on" */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 9561e33b8a9..64589eaaaee 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,7 +23,7 @@
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [AT91CAP9 revC only] */
+#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [CAP9 revC & some SAM9 only] */
 #define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
 #define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
 #define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
@@ -39,11 +39,11 @@
 #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
 
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [some SAM9, CAP9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
 #define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
@@ -72,6 +72,7 @@
 #define			AT91_PMC_CSS_MAIN		(1 << 0)
 #define			AT91_PMC_CSS_PLLA		(2 << 0)
 #define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
 #define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
 #define			AT91_PMC_PRES_1			(0 << 2)
 #define			AT91_PMC_PRES_2			(1 << 2)
@@ -88,12 +89,25 @@
 #define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
-#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
 #define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
 #define			AT91_PMC_PDIV_1			(0 << 12)
 #define			AT91_PMC_PDIV_2			(1 << 12)
+#define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
+#define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
+#define			AT91_PMC_PLLADIV2_ON		(1 << 12)
 
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+#define	AT91_PMC_USB		(AT91_PMC + 0x38)	/* USB Clock Register [some SAM9 only] */
+#define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
+#define			AT91_PMC_USBS_PLLA		(0 << 0)
+#define			AT91_PMC_USBS_UPLL		(1 << 0)
+#define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
+#define			AT91_PMC_CSSMCK_CSS		(0 << 8)
+#define			AT91_PMC_CSSMCK_MCK		(1 << 8)
 
 #define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
 #define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
@@ -102,7 +116,7 @@
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
 #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9, AT91CAP9 only] */
 #define		AT91_PMC_OSCSEL		(1 <<  7)		/* Slow Clock Oscillator [AT91CAP9 revC only] */
 #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a9c78bc72b8..be747f5c6cd 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -1,11 +1,26 @@
 if ARCH_DAVINCI
 
+config AINTC
+	bool
+
+config CP_INTC
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
+	select AINTC
+
+config ARCH_DAVINCI_DM355
+        bool "DaVinci 355 based system"
+	select AINTC
+
+config ARCH_DAVINCI_DM646x
+        bool "DaVinci 646x based system"
+	select AINTC
 
 comment "DaVinci Board Type"
 
@@ -17,6 +32,34 @@ config MACH_DAVINCI_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
 
+config MACH_SFFSDR
+	bool "Lyrtech SFFSDR"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Say Y here to select the Lyrtech Small Form Factor
+	  Software Defined Radio (SFFSDR) board.
+
+config MACH_DAVINCI_DM355_EVM
+	bool "TI DM355 EVM"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+	bool "DM355 Leopard board"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+	bool "TI DM6467 EVM"
+	depends on ARCH_DAVINCI_DM646x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM6467 EVM
+
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 1674661942f..059ab78084b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,13 +4,22 @@
 #
 
 # Common objects
-obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o devices.o dma.o usb.o
+obj-y 			:= time.o clock.o serial.o io.o psc.o \
+			   gpio.o devices.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
 obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+
+obj-$(CONFIG_AINTC)			+= irq.o
+obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
new file mode 100644
index 00000000000..5ac2f565d86
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -0,0 +1,298 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+	gpio_request(gpio + 0, "mmc0_ro");
+	gpio_request(gpio + 1, "mmc0_cd");
+	gpio_request(gpio + 2, "mmc1_ro");
+	gpio_request(gpio + 3, "mmc1_cd");
+
+	/* we "know" these are input-only so we don't
+	 * need to call gpio_direction_input()
+	 */
+
+	dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+		.platform_data = dm355evm_mmcsd_gpios,
+		/* plus irq */ },
+	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+
+	gpio_request(5, "dm355evm_msp");
+	gpio_direction_input(5);
+	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+	i2c_register_board_info(1, dm355evm_i2c_info,
+			ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+	{
+		/* addr */
+		.start	= 0x04014000,
+		.end	= 0x04014001,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* data */
+		.start	= 0x04014002,
+		.end	= 0x04014003,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+	},
+};
+
+static struct platform_device dm355evm_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.resource	= dm355evm_dm9000_rsrc,
+	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+	&dm355evm_dm9000,
+	&davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+	dm355_init();
+}
+
+static int dm355evm_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(dm355evm_mmc_gpios))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
+}
+
+static int dm355evm_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(dm355evm_mmc_gpios))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355evm_mmc_config = {
+	.get_cd		= dm355evm_mmc_get_cd,
+	.get_ro		= dm355evm_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_1,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE	1	/* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640a",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640a,
+		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm355_evm_init(void)
+{
+	struct clk *aemif;
+
+	gpio_request(1, "dm9000");
+	gpio_direction_input(1);
+	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+	if (IS_ERR(aemif))
+		WARN("%s: unable to get AEMIF clock\n", __func__);
+	else
+		clk_enable(aemif);
+
+	platform_add_devices(davinci_evm_devices,
+			     ARRAY_SIZE(davinci_evm_devices));
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	/* NOTE:  NAND flash timings set by the UBL are slower than
+	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+	 * but could be 0x0400008c for about 25% faster page reads.
+	 */
+
+	gpio_request(2, "usb_id_toggle");
+	gpio_direction_output(2, USB_ID_VALUE);
+	/* irlml6401 switches over 1A in under 8 msec */
+	setup_usb(500, 8);
+
+	davinci_setup_mmc(0, &dm355evm_mmc_config);
+	davinci_setup_mmc(1, &dm355evm_mmc_config);
+
+	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+			ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io	      = dm355_evm_map_io,
+	.init_irq     = dm355_evm_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = dm355_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
new file mode 100644
index 00000000000..28c9008df4f
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -0,0 +1,296 @@
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+	gpio_request(gpio + 0, "mmc0_ro");
+	gpio_request(gpio + 1, "mmc0_cd");
+	gpio_request(gpio + 2, "mmc1_ro");
+	gpio_request(gpio + 3, "mmc1_cd");
+
+	/* we "know" these are input-only so we don't
+	 * need to call gpio_direction_input()
+	 */
+
+	leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+		.platform_data = dm355leopard_mmcsd_gpios,
+		/* plus irq */ },
+	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+
+	gpio_request(5, "dm355leopard_msp");
+	gpio_direction_input(5);
+	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+	i2c_register_board_info(1, dm355leopard_i2c_info,
+			ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+	{
+		/* addr */
+		.start	= 0x04000000,
+		.end	= 0x04000001,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* data */
+		.start	= 0x04000016,
+		.end	= 0x04000017,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+	},
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+	.name		= "dm9000",
+	.id		= -1,
+	.resource	= dm355leopard_dm9000_rsrc,
+	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+	&dm355leopard_dm9000,
+	&davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+	dm355_init();
+}
+
+static int dm355leopard_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+	.get_cd		= dm355leopard_mmc_get_cd,
+	.get_ro		= dm355leopard_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender.  If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE	1	/* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640a",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640a,
+		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+static __init void dm355_leopard_init(void)
+{
+	struct clk *aemif;
+
+	gpio_request(9, "dm9000");
+	gpio_direction_input(9);
+	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+	if (IS_ERR(aemif))
+		WARN("%s: unable to get AEMIF clock\n", __func__);
+	else
+		clk_enable(aemif);
+
+	platform_add_devices(davinci_leopard_devices,
+			     ARRAY_SIZE(davinci_leopard_devices));
+	leopard_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	/* NOTE:  NAND flash timings set by the UBL are slower than
+	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+	 * but could be 0x0400008c for about 25% faster page reads.
+	 */
+
+	gpio_request(2, "usb_id_toggle");
+	gpio_direction_output(2, USB_ID_VALUE);
+	/* irlml6401 switches over 1A in under 8 msec */
+	setup_usb(500, 8);
+
+	davinci_setup_mmc(0, &dm355leopard_mmc_config);
+	davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
+	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+			ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io	      = dm355_leopard_map_io,
+	.init_irq     = dm355_leopard_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = dm355_leopard_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b2e7f9c63bc..d9d40450bdc 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,12 +16,11 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/memory.h>
-#include <linux/etherdevice.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -44,6 +43,9 @@
 #include <mach/mux.h>
 #include <mach/psc.h>
 #include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -436,45 +438,15 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
  *  - ... newer boards may have more
  */
-static struct memory_accessor *at24_mem_acc;
-
-static void at24_setup(struct memory_accessor *mem_acc, void *context)
-{
-	DECLARE_MAC_BUF(mac_str);
-	char mac_addr[6];
-
-	at24_mem_acc = mem_acc;
-
-	/* Read MAC addr from EEPROM */
-	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
-		printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
-		       print_mac(mac_str, mac_addr));
-	}
-}
 
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
 	.flags		= AT24_FLAG_ADDR16,
-	.setup          = at24_setup,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
 };
 
-int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
-{
-	if (at24_mem_acc)
-		return at24_mem_acc->read(at24_mem_acc, buf, off, count);
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_read);
-
-int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
-{
-	if (at24_mem_acc)
-		return at24_mem_acc->write(at24_mem_acc, buf, off, count);
-	return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_write);
-
 /*
  * MSP430 supports RTC, card detection, input from IR remote, and
  * a bit more.  It triggers interrupts on GPIO(7) from pressing
@@ -545,6 +517,27 @@ static int dm6444evm_msp430_get_pins(void)
 	return (buf[3] << 8) | buf[2];
 }
 
+static int dm6444evm_mmc_get_cd(int module)
+{
+	int status = dm6444evm_msp430_get_pins();
+
+	return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+	int status = dm6444evm_msp430_get_pins();
+
+	return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+	.get_cd		= dm6444evm_mmc_get_cd,
+	.get_ro		= dm6444evm_mmc_get_ro,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_1
+};
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
@@ -598,7 +591,6 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
-	davinci_map_common_io();
 	dm644x_init();
 }
 
@@ -639,6 +631,7 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 static __init void davinci_evm_init(void)
 {
 	struct clk *aemif_clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_enable(aemif_clk);
@@ -671,8 +664,13 @@ static __init void davinci_evm_init(void)
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
 
+	davinci_setup_mmc(0, &dm6446evm_mmc_config);
+
 	davinci_serial_init(&uart_config);
 
+	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
+
 	/* Register the fixup for PHY on DaVinci */
 	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
 					davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
new file mode 100644
index 00000000000..e17de635262
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -0,0 +1,262 @@
+/*
+ * TI DaVinci DM646X EVM board
+ *
+ * Derived from: arch/arm/mach-davinci/board-evm.c
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * (C) 2007-2008, MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/etherdevice.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm646x.h>
+#include <mach/common.h>
+#include <mach/psc.h>
+#include <mach/serial.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
+
+#define DM646X_EVM_PHY_MASK		(0x2)
+#define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+/* LEDS */
+
+static struct gpio_led evm_leds[] = {
+	{ .name = "DS1", .active_low = 1, },
+	{ .name = "DS2", .active_low = 1, },
+	{ .name = "DS3", .active_low = 1, },
+	{ .name = "DS4", .active_low = 1, },
+};
+
+static __initconst struct gpio_led_platform_data evm_led_data = {
+	.num_leds = ARRAY_SIZE(evm_leds),
+	.leds     = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int evm_led_setup(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	struct gpio_led *leds = evm_leds;
+	int status;
+
+	while (ngpio--) {
+		leds->gpio = gpio++;
+		leds++;
+	};
+
+	evm_led_dev = platform_device_alloc("leds-gpio", 0);
+	platform_device_add_data(evm_led_dev, &evm_led_data,
+				sizeof(evm_led_data));
+
+	evm_led_dev->dev.parent = &client->dev;
+	status = platform_device_add(evm_led_dev);
+	if (status < 0) {
+		platform_device_put(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return status;
+}
+
+static int evm_led_teardown(struct i2c_client *client, int gpio,
+				unsigned ngpio, void *c)
+{
+	if (evm_led_dev) {
+		platform_device_unregister(evm_led_dev);
+		evm_led_dev = NULL;
+	}
+	return 0;
+}
+
+static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+
+static int evm_sw_setup(struct i2c_client *client, int gpio,
+			unsigned ngpio, void *c)
+{
+	int status;
+	int i;
+	char label[10];
+
+	for (i = 0; i < 4; ++i) {
+		snprintf(label, 10, "user_sw%d", i);
+		status = gpio_request(gpio, label);
+		if (status)
+			goto out_free;
+		evm_sw_gpio[i] = gpio++;
+
+		status = gpio_direction_input(evm_sw_gpio[i]);
+		if (status) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+			goto out_free;
+		}
+
+		status = gpio_export(evm_sw_gpio[i], 0);
+		if (status) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+			goto out_free;
+		}
+	}
+	return status;
+out_free:
+	for (i = 0; i < 4; ++i) {
+		if (evm_sw_gpio[i] != -EINVAL) {
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+		}
+	}
+	return status;
+}
+
+static int evm_sw_teardown(struct i2c_client *client, int gpio,
+			unsigned ngpio, void *c)
+{
+	int i;
+
+	for (i = 0; i < 4; ++i) {
+		if (evm_sw_gpio[i] != -EINVAL) {
+			gpio_unexport(evm_sw_gpio[i]);
+			gpio_free(evm_sw_gpio[i]);
+			evm_sw_gpio[i] = -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int evm_pcf_setup(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	int status;
+
+	if (ngpio < 8)
+		return -EINVAL;
+
+	status = evm_sw_setup(client, gpio, 4, c);
+	if (status)
+		return status;
+
+	return evm_led_setup(client, gpio+4, 4, c);
+}
+
+static int evm_pcf_teardown(struct i2c_client *client, int gpio,
+			unsigned int ngpio, void *c)
+{
+	BUG_ON(ngpio < 8);
+
+	evm_sw_teardown(client, gpio, 4, c);
+	evm_led_teardown(client, gpio+4, 4, c);
+
+	return 0;
+}
+
+static struct pcf857x_platform_data pcf_data = {
+	.gpio_base	= DAVINCI_N_GPIO+1,
+	.setup		= evm_pcf_setup,
+	.teardown	= evm_pcf_teardown,
+};
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ *  - 0x7f00, 6 bytes Ethernet Address
+ *  - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data  = &eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("pcf8574a", 0x38),
+		.platform_data	= &pcf_data,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq       = 100 /* kHz */,
+	.bus_delay      = 0 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static void __init davinci_map_io(void)
+{
+	dm646x_init();
+}
+
+static __init void evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+}
+
+static __init void davinci_dm646x_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io       = davinci_map_io,
+	.init_irq     = davinci_dm646x_evm_irq_init,
+	.timer        = &davinci_timer,
+	.init_machine = evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
new file mode 100644
index 00000000000..748a8e48541
--- /dev/null
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -0,0 +1,189 @@
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/common.h>
+
+#define SFFSDR_PHY_MASK		(0x2)
+#define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+	/* U-Boot Environment: Block 0
+	 * UBL:                Block 1
+	 * U-Boot:             Blocks 6-7 (256 kb)
+	 * Integrity Kernel:   Blocks 8-31 (3 Mb)
+	 * Integrity Data:     Blocks 100-END
+	 */
+	{
+		.name		= "Linux Kernel",
+		.offset		= 32 * SZ_128K,
+		.size		= 16 * SZ_128K, /* 2 Mb */
+		.mask_flags	= MTD_WRITEABLE, /* Force read-only */
+	},
+	{
+		.name		= "Linux ROOT",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * SZ_128K, /* 32 Mb */
+		.mask_flags	= 0, /* R/W */
+	},
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+	.parts		= davinci_sffsdr_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+	.name		= "davinci_nand", /* Name of driver */
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_sffsdr_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+	.resource	= davinci_sffsdr_nandflash_resource,
+};
+
+static struct emac_platform_data sffsdr_emac_pdata = {
+	.phy_mask	= SFFSDR_PHY_MASK,
+	.mdio_max_freq	= SFFSDR_MDIO_FREQUENCY,
+};
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len	= (64*1024) / 8,
+	.page_size	= 32,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24lc64", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+	/* Other I2C devices:
+	 * MSP430,  addr 0x23 (not used)
+	 * PCA9543, addr 0x70 (setup done by U-Boot)
+	 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+	 */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+	&davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+	dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	platform_add_devices(davinci_sffsdr_devices,
+			     ARRAY_SIZE(davinci_sffsdr_devices));
+	sffsdr_init_i2c();
+	davinci_serial_init(&uart_config);
+	soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+	setup_usb(0, 0); /* We support only peripheral mode. */
+
+	/* mux VLYNQ pins */
+	davinci_cfg_reg(DM644X_VLYNQEN);
+	davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.map_io	      = davinci_sffsdr_map_io,
+	.init_irq     = davinci_sffsdr_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = davinci_sffsdr_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f0baaa15a57..39bf321d70a 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk)
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+				clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk)
 	if (WARN_ON(clk->usecount == 0))
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-		davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+				clk->lpsc, 0);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -164,11 +166,11 @@ static int __init clk_disable_unused(void)
 			continue;
 
 		/* ignore if in Disabled or SwRstDisable states */
-		if (!davinci_psc_is_clk_active(ck->lpsc))
+		if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
+		davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 35736ec202f..27233cb4a2f 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -67,6 +67,7 @@ struct clk {
 	u8			usecount;
 	u8			flags;
 	u8			lpsc;
+	u8			psc_ctlr;
 	struct clk              *parent;
 	struct pll_data         *pll_data;
 	u32                     div_reg;
@@ -93,4 +94,7 @@ struct davinci_clk {
 	}
 
 int davinci_clk_init(struct davinci_clk *clocks);
+
+extern struct platform_device davinci_wdt_device;
+
 #endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
new file mode 100644
index 00000000000..61ede19c6b5
--- /dev/null
+++ b/arch/arm/mach-davinci/common.c
@@ -0,0 +1,108 @@
+/*
+ * Code commons to all DaVinci SoCs.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/emac.h>
+
+#include "clock.h"
+
+struct davinci_soc_info davinci_soc_info;
+EXPORT_SYMBOL(davinci_soc_info);
+
+void __iomem *davinci_intc_base;
+int davinci_intc_type;
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+{
+	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+	off_t offset = (off_t)context;
+
+	/* Read MAC addr from EEPROM */
+	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+}
+
+static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+{
+	int i;
+	struct davinci_id *dip;
+	u8 variant = (jtag_id & 0xf0000000) >> 28;
+	u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+
+	for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+			i++, dip++)
+		/* Don't care about the manufacturer right now */
+		if ((dip->part_no == part_no) && (dip->variant == variant))
+			return dip;
+
+	return NULL;
+}
+
+void __init davinci_common_init(struct davinci_soc_info *soc_info)
+{
+	int ret;
+	struct davinci_id *dip;
+
+	if (!soc_info) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
+
+	if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
+		iotable_init(davinci_soc_info.io_desc,
+				davinci_soc_info.io_desc_num);
+
+	/*
+	 * Normally devicemaps_init() would flush caches and tlb after
+	 * mdesc->map_io(), but we must also do it here because of the CPU
+	 * revision check below.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+
+	/*
+	 * We want to check CPU revision early for cpu_is_xxxx() macros.
+	 * IO space mapping must be initialized before we can do that.
+	 */
+	davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
+
+	dip = davinci_get_id(davinci_soc_info.jtag_id);
+	if (!dip) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	davinci_soc_info.cpu_id = dip->cpu_id;
+	pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
+
+	if (davinci_soc_info.cpu_clks) {
+		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
+
+		if (ret != 0)
+			goto err;
+	}
+
+	davinci_intc_base = davinci_soc_info.intc_base;
+	davinci_intc_type = davinci_soc_info.intc_type;
+	return;
+
+err:
+	pr_err("davinci_common_init: SoC Initialization failed\n");
+}
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
new file mode 100644
index 00000000000..96c8e97a7de
--- /dev/null
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -0,0 +1,161 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) driver
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/cp_intc.h>
+
+static void __iomem *cp_intc_base;
+
+static inline unsigned int cp_intc_read(unsigned offset)
+{
+	return __raw_readl(cp_intc_base + offset);
+}
+
+static inline void cp_intc_write(unsigned long value, unsigned offset)
+{
+	__raw_writel(value, cp_intc_base + offset);
+}
+
+static void cp_intc_ack_irq(unsigned int irq)
+{
+	cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
+}
+
+/* Disable interrupt */
+static void cp_intc_mask_irq(unsigned int irq)
+{
+	/* XXX don't know why we need to disable nIRQ here... */
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
+	cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+}
+
+/* Enable interrupt */
+static void cp_intc_unmask_irq(unsigned int irq)
+{
+	cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
+}
+
+static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned reg		= BIT_WORD(irq);
+	unsigned mask		= BIT_MASK(irq);
+	unsigned polarity	= cp_intc_read(CP_INTC_SYS_POLARITY(reg));
+	unsigned type		= cp_intc_read(CP_INTC_SYS_TYPE(reg));
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		polarity |= mask;
+		type |= mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		polarity &= ~mask;
+		type |= mask;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		polarity |= mask;
+		type &= ~mask;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		polarity &= ~mask;
+		type &= ~mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
+	cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
+
+	return 0;
+}
+
+static struct irq_chip cp_intc_irq_chip = {
+	.name		= "cp_intc",
+	.ack		= cp_intc_ack_irq,
+	.mask		= cp_intc_mask_irq,
+	.unmask		= cp_intc_unmask_irq,
+	.set_type	= cp_intc_set_irq_type,
+};
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+			 u8 *irq_prio)
+{
+	unsigned num_reg	= BITS_TO_LONGS(num_irq);
+	int i;
+
+	cp_intc_base = base;
+
+	cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
+
+	/* Disable all host interrupts */
+	cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
+
+	/* Disable system interrupts */
+	for (i = 0; i < num_reg; i++)
+		cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
+
+	/* Set to normal mode, no nesting, no priority hold */
+	cp_intc_write(0, CP_INTC_CTRL);
+	cp_intc_write(0, CP_INTC_HOST_CTRL);
+
+	/* Clear system interrupt status */
+	for (i = 0; i < num_reg; i++)
+		cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
+
+	/* Enable nIRQ (what about nFIQ?) */
+	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+
+	/*
+	 * Priority is determined by host channel: lower channel number has
+	 * higher priority i.e. channel 0 has highest priority and channel 31
+	 * had the lowest priority.
+	 */
+	num_reg = (num_irq + 3) >> 2;	/* 4 channels per register */
+	if (irq_prio) {
+		unsigned j, k;
+		u32 val;
+
+		for (k = i = 0; i < num_reg; i++) {
+			for (val = j = 0; j < 4; j++, k++) {
+				val >>= 8;
+				if (k < num_irq)
+					val |= irq_prio[k] << 24;
+			}
+
+			cp_intc_write(val, CP_INTC_CHAN_MAP(i));
+		}
+	} else	{
+		/*
+		 * Default everything to channel 15 if priority not specified.
+		 * Note that channel 0-1 are mapped to nFIQ and channels 2-31
+		 * are mapped to nIRQ.
+		 */
+		for (i = 0; i < num_reg; i++)
+			cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
+	}
+
+	/* Set up genirq dispatching for cp_intc */
+	for (i = 0; i < num_irq; i++) {
+		set_irq_chip(i, &cp_intc_irq_chip);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+		set_irq_handler(i, handle_edge_irq);
+	}
+
+	/* Enable global interrupt */
+	cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a31370b93dd..de16f347566 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,8 +23,14 @@
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
+#include <mach/edma.h>
+#include <mach/mmc.h>
+#include <mach/time.h>
 
 #define DAVINCI_I2C_BASE	     0x01C21000
+#define DAVINCI_MMCSD0_BASE	     0x01E10000
+#define DM355_MMCSD0_BASE	     0x01E11000
+#define DM355_MMCSD1_BASE	     0x01E00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 	(void) platform_device_register(&davinci_i2c_device);
 }
 
+#if	defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+
+static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd0_resources[] = {
+	{
+		/* different on dm355 */
+		.start = DAVINCI_MMCSD0_BASE,
+		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/* IRQs:  MMC/SD, then SDIO */
+	{
+		.start = IRQ_MMCINT,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		/* different on dm355 */
+		.start = IRQ_SDIOINT,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* DMA channels: RX, then TX */
+	{
+		.start = DAVINCI_DMA_MMCRXEVT,
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = DAVINCI_DMA_MMCTXEVT,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device davinci_mmcsd0_device = {
+	.name = "davinci_mmc",
+	.id = 0,
+	.dev = {
+		.dma_mask = &mmcsd0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(mmcsd0_resources),
+	.resource = mmcsd0_resources,
+};
+
+static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd1_resources[] = {
+	{
+		.start = DM355_MMCSD1_BASE,
+		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/* IRQs:  MMC/SD, then SDIO */
+	{
+		.start = IRQ_DM355_MMCINT1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DM355_SDIOINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* DMA channels: RX, then TX */
+	{
+		.start = 30,	/* rx */
+		.flags = IORESOURCE_DMA,
+	}, {
+		.start = 31,	/* tx */
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device davinci_mmcsd1_device = {
+	.name = "davinci_mmc",
+	.id = 1,
+	.dev = {
+		.dma_mask = &mmcsd1_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(mmcsd1_resources),
+	.resource = mmcsd1_resources,
+};
+
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+	struct platform_device	*pdev = NULL;
+
+	if (WARN_ON(cpu_is_davinci_dm646x()))
+		return;
+
+	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
+	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
+	 *
+	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
+	 * not handled right here ...
+	 */
+	switch (module) {
+	case 1:
+		if (!cpu_is_davinci_dm355())
+			break;
+
+		/* REVISIT we may not need all these pins if e.g. this
+		 * is a hard-wired SDIO device...
+		 */
+		davinci_cfg_reg(DM355_SD1_CMD);
+		davinci_cfg_reg(DM355_SD1_CLK);
+		davinci_cfg_reg(DM355_SD1_DATA0);
+		davinci_cfg_reg(DM355_SD1_DATA1);
+		davinci_cfg_reg(DM355_SD1_DATA2);
+		davinci_cfg_reg(DM355_SD1_DATA3);
+
+		pdev = &davinci_mmcsd1_device;
+		break;
+	case 0:
+		if (cpu_is_davinci_dm355()) {
+			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+
+			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
+			davinci_cfg_reg(DM355_MMCSD0);
+
+			/* enable RX EDMA */
+			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
+		}
+
+		else if (cpu_is_davinci_dm644x()) {
+			/* REVISIT: should this be in board-init code? */
+			void __iomem *base =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+			/* Power-on 3.3V IO cells */
+			__raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+			/*Set up the pull regiter for MMC */
+			davinci_cfg_reg(DM644X_MSTK);
+		}
+
+		pdev = &davinci_mmcsd0_device;
+		break;
+	}
+
+	if (WARN_ON(!pdev))
+		return;
+
+	pdev->dev.platform_data = config;
+	platform_device_register(pdev);
+}
+
+#else
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct resource wdt_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device davinci_wdt_device = {
+	.name		= "watchdog",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static void davinci_init_wdt(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
+	platform_device_register(&davinci_wdt_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct davinci_timer_instance davinci_timer_instance[2] = {
+	{
+		.base		= IO_ADDRESS(DAVINCI_TIMER0_BASE),
+		.bottom_irq	= IRQ_TINT0_TINT12,
+		.top_irq	= IRQ_TINT0_TINT34,
+	},
+	{
+		.base		= IO_ADDRESS(DAVINCI_TIMER1_BASE),
+		.bottom_irq	= IRQ_TINT1_TINT12,
+		.top_irq	= IRQ_TINT1_TINT34,
+	},
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init davinci_init_devices(void)
+{
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	davinci_init_wdt();
+
+	return 0;
+}
+arch_initcall(davinci_init_devices);
+
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
new file mode 100644
index 00000000000..baaaf328de2
--- /dev/null
+++ b/arch/arm/mach-davinci/dm355.c
@@ -0,0 +1,730 @@
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+	.flags     = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+	.flags     = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	/* FIXME -- crystal rate is board-specific */
+	.rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.flags = CLK_PLL,
+	.pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name = "pll1_sysclk4",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+	.name = "vpss_dac",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+	.name = "vpss_master",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_VPSSMSTR,
+	.flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+	.name = "vpss_slave",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+	.name = "clkout1",
+	.parent = &pll1_aux_clk,
+	/* NOTE:  clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+	.name = "clkout2",
+	.parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2",
+	.parent = &ref_clk,
+	.flags = CLK_PLL,
+	.pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+	.name = "pll2_sysclkbp",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+	.name = "clkout3",
+	.parent = &pll2_sysclkbp,
+	/* NOTE:  clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+	.name = "arm_clk",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ *   - in SyncReset state by default
+ *	.lpsc = DAVINCI_LPSC_TPCC,
+ *	.lpsc = DAVINCI_LPSC_TPTC0,
+ *	.lpsc = DAVINCI_LPSC_TPTC1,
+ *	.lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ *	.lpsc = DAVINCI_LPSC_MEMSTICK,
+ *   - in Enabled state by default
+ *	.lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ *	.lpsc = DAVINCI_LPSC_SCR2,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_SCR3,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_SCR4,	// "bus"
+ *	.lpsc = DAVINCI_LPSC_CROSSBAR,	// "emulation"
+ *	.lpsc = DAVINCI_LPSC_CFG27,	// "test"
+ *	.lpsc = DAVINCI_LPSC_CFG3,	// "test"
+ *	.lpsc = DAVINCI_LPSC_CFG5,	// "test"
+ */
+
+static struct clk mjcp_clk = {
+	.name = "mjcp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+	.name = "asp0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+	.name = "asp1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+	.name = "mmcsd0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+	.name = "mmcsd1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+	.name = "spi0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+	.name = "spi1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+	.name = "spi2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name = "pwm2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+	.name = "pwm3",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER2,
+	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+	.name = "timer3",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+	.name = "rto",
+	.parent = &pll1_aux_clk,
+	.lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+	.name = "usb",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "vpss_dac", &vpss_dac_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "vpss_slave", &vpss_slave_clk),
+	CLK(NULL, "clkout1", &clkout1_clk),
+	CLK(NULL, "clkout2", &clkout2_clk),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+	CLK(NULL, "clkout3", &clkout3_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "mjcp", &mjcp_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK("soc-audio.1", NULL, &asp1_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK(NULL, "spi0", &spi0_clk),
+	CLK(NULL, "spi1", &spi1_clk),
+	CLK(NULL, "spi2", &spi2_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "pwm3", &pwm3_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "timer3", &timer3_clk),
+	CLK(NULL, "rto", &rto_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+	{
+		.start = 0x01c66000,
+		.end   = 0x01c667ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_DM355_SPINT0_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* Not yet used, so not included:
+	 * IORESOURCE_IRQ:
+	 *  - IRQ_DM355_SPINT0_0
+	 * IORESOURCE_DMA:
+	 *  - DAVINCI_DMA_SPI_SPIX
+	 *  - DAVINCI_DMA_SPI_SPIR
+	 */
+};
+
+static struct platform_device dm355_spi0_device = {
+	.name = "spi_davinci",
+	.id = 0,
+	.dev = {
+		.dma_mask = &dm355_spi0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
+	.resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len)
+{
+	/* for now, assume we need MISO */
+	davinci_cfg_reg(DM355_SPI0_SDI);
+
+	/* not all slaves will be wired up */
+	if (chipselect_mask & BIT(0))
+		davinci_cfg_reg(DM355_SPI0_SDENA0);
+	if (chipselect_mask & BIT(1))
+		davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+	spi_register_board_info(info, len);
+
+	platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+#define PINMUX2		0x08
+#define PINMUX3		0x0c
+#define PINMUX4		0x10
+#define INTMUX		0x18
+#define EVTMUX		0x1c
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm355_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
+
+MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
+MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
+MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
+
+MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
+MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
+
+MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
+MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
+
+MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
+MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
+MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
+
+INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
+INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
+
+EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
+EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
+EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
+#endif
+};
+
+static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM355_CCDC_VDINT0]		= 2,
+	[IRQ_DM355_CCDC_VDINT1]		= 6,
+	[IRQ_DM355_CCDC_VDINT2]		= 6,
+	[IRQ_DM355_IPIPE_HST]		= 6,
+	[IRQ_DM355_H3AINT]		= 6,
+	[IRQ_DM355_IPIPE_SDR]		= 6,
+	[IRQ_DM355_IPIPEIFINT]		= 6,
+	[IRQ_DM355_OSDINT]		= 7,
+	[IRQ_DM355_VENCINT]		= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM355_RTOINT]		= 4,
+	[IRQ_DM355_UARTINT2]		= 7,
+	[IRQ_DM355_TINT6]		= 7,
+	[IRQ_CCINT0]			= 5,	/* dma */
+	[IRQ_CCERRINT]			= 5,	/* dma */
+	[IRQ_TCERRINT0]			= 5,	/* dma */
+	[IRQ_TCERRINT]			= 5,	/* dma */
+	[IRQ_DM355_SPINT2_1]		= 7,
+	[IRQ_DM355_TINT7]		= 4,
+	[IRQ_DM355_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM355_MMCINT1]		= 7,
+	[IRQ_DM355_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 7,
+	[IRQ_AEMIFINT]			= 7,
+	[IRQ_DM355_SDIOINT1]		= 4,
+	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 7,
+	[IRQ_PWMINT2]			= 7,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM355_SPINT0_0]		= 3,
+	[IRQ_DM355_SPINT0_1]		= 3,
+	[IRQ_DM355_GPIO0]		= 3,
+	[IRQ_DM355_GPIO1]		= 7,
+	[IRQ_DM355_GPIO2]		= 4,
+	[IRQ_DM355_GPIO3]		= 4,
+	[IRQ_DM355_GPIO4]		= 7,
+	[IRQ_DM355_GPIO5]		= 7,
+	[IRQ_DM355_GPIO6]		= 7,
+	[IRQ_DM355_GPIO7]		= 7,
+	[IRQ_DM355_GPIO8]		= 7,
+	[IRQ_DM355_GPIO9]		= 7,
+	[IRQ_DM355_GPIOBNK0]		= 7,
+	[IRQ_DM355_GPIOBNK1]		= 7,
+	[IRQ_DM355_GPIOBNK2]		= 7,
+	[IRQ_DM355_GPIOBNK3]		= 7,
+	[IRQ_DM355_GPIOBNK4]		= 7,
+	[IRQ_DM355_GPIOBNK5]		= 7,
+	[IRQ_DM355_GPIOBNK6]		= 7,
+	[IRQ_COMMTX]			= 7,
+	[IRQ_COMMRX]			= 7,
+	[IRQ_EMUINT]			= 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+	12, 13, 24, 56, 57,
+	58, 59, 60, 61, 62,
+	63,
+	-1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 4,
+	.n_slot		= 128,
+	.n_tc		= 2,
+	.noevent	= dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm355_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm355_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm355_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb73b,
+		.manufacturer	= 0x00f,
+		.cpu_id		= DAVINCI_CPU_ID_DM355,
+		.name		= "dm355",
+	},
+};
+
+static void __iomem *dm355_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm355_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm355_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DM355_UART2_BASE,
+		.irq		= IRQ_DM355_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm355_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm355_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm355 = {
+	.io_desc		= dm355_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm355_ids,
+	.ids_num		= ARRAY_SIZE(dm355_ids),
+	.cpu_clks		= dm355_clks,
+	.psc_bases		= dm355_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm355_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm355_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm355_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm355_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 104,
+	.gpio_irq		= IRQ_DM355_GPIOBNK0,
+	.serial_dev		= &dm355_serial_device,
+	.sram_dma		= 0x00010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm355_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm355);
+}
+
+static int __init dm355_init_devices(void)
+{
+	if (!cpu_is_davinci_dm355())
+		return 0;
+
+	davinci_cfg_reg(DM355_INT_EDMA_CC);
+	platform_device_register(&dm355_edma_device);
+	return 0;
+}
+postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d428ef192ea..fb5449b3c97 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,7 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/serial_8250.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
 
 #include <mach/dm644x.h>
 #include <mach/clock.h>
@@ -20,6 +24,9 @@
 #include <mach/irqs.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -312,7 +319,14 @@ struct davinci_clk dm644x_clks[] = {
 	CLK(NULL, NULL, NULL),
 };
 
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+static struct emac_platform_data dm644x_emac_pdata = {
+	.ctrl_reg_offset	= DM644X_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM644X_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM644X_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM644X_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM644X_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_1,
+};
 
 static struct resource dm644x_emac_resources[] = {
 	{
@@ -330,11 +344,15 @@ static struct resource dm644x_emac_resources[] = {
 static struct platform_device dm644x_emac_device = {
        .name		= "davinci_emac",
        .id		= 1,
+       .dev = {
+	       .platform_data	= &dm644x_emac_pdata,
+       },
        .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
        .resource	= dm644x_emac_resources,
 };
 
-#endif
+#define PINMUX0		0x00
+#define PINMUX1		0x04
 
 /*
  * Device specific mux setup
@@ -343,6 +361,7 @@ static struct platform_device dm644x_emac_device = {
  *				reg  offset mask  mode
  */
 static const struct mux_config dm644x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
 MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
 MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
 MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
@@ -383,8 +402,76 @@ MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
 
 MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
 MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
+#endif
 };
 
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_VDINT0]		= 2,
+	[IRQ_VDINT1]		= 6,
+	[IRQ_VDINT2]		= 6,
+	[IRQ_HISTINT]		= 6,
+	[IRQ_H3AINT]		= 6,
+	[IRQ_PRVUINT]		= 6,
+	[IRQ_RSZINT]		= 6,
+	[7]			= 7,
+	[IRQ_VENCINT]		= 6,
+	[IRQ_ASQINT]		= 6,
+	[IRQ_IMXINT]		= 6,
+	[IRQ_VLCDINT]		= 6,
+	[IRQ_USBINT]		= 4,
+	[IRQ_EMACINT]		= 4,
+	[14]			= 7,
+	[15]			= 7,
+	[IRQ_CCINT0]		= 5,	/* dma */
+	[IRQ_CCERRINT]		= 5,	/* dma */
+	[IRQ_TCERRINT0]		= 5,	/* dma */
+	[IRQ_TCERRINT]		= 5,	/* dma */
+	[IRQ_PSCIN]		= 7,
+	[21]			= 7,
+	[IRQ_IDE]		= 4,
+	[23]			= 7,
+	[IRQ_MBXINT]		= 7,
+	[IRQ_MBRINT]		= 7,
+	[IRQ_MMCINT]		= 7,
+	[IRQ_SDIOINT]		= 7,
+	[28]			= 7,
+	[IRQ_DDRINT]		= 7,
+	[IRQ_AEMIFINT]		= 7,
+	[IRQ_VLQINT]		= 4,
+	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
+	[IRQ_PWMINT0]		= 7,
+	[IRQ_PWMINT1]		= 7,
+	[IRQ_PWMINT2]		= 7,
+	[IRQ_I2C]		= 3,
+	[IRQ_UARTINT0]		= 3,
+	[IRQ_UARTINT1]		= 3,
+	[IRQ_UARTINT2]		= 3,
+	[IRQ_SPINT0]		= 3,
+	[IRQ_SPINT1]		= 3,
+	[45]			= 7,
+	[IRQ_DSP2ARM0]		= 4,
+	[IRQ_DSP2ARM1]		= 4,
+	[IRQ_GPIO0]		= 7,
+	[IRQ_GPIO1]		= 7,
+	[IRQ_GPIO2]		= 7,
+	[IRQ_GPIO3]		= 7,
+	[IRQ_GPIO4]		= 7,
+	[IRQ_GPIO5]		= 7,
+	[IRQ_GPIO6]		= 7,
+	[IRQ_GPIO7]		= 7,
+	[IRQ_GPIOBNK0]		= 7,
+	[IRQ_GPIOBNK1]		= 7,
+	[IRQ_GPIOBNK2]		= 7,
+	[IRQ_GPIOBNK3]		= 7,
+	[IRQ_GPIOBNK4]		= 7,
+	[IRQ_COMMTX]		= 7,
+	[IRQ_COMMRX]		= 7,
+	[IRQ_EMUINT]		= 7,
+};
 
 /*----------------------------------------------------------------------*/
 
@@ -444,10 +531,118 @@ static struct platform_device dm644x_edma_device = {
 };
 
 /*----------------------------------------------------------------------*/
+
+static struct map_desc dm644x_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00008000),
+		.length		= SZ_16K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm644x_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb700,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6446,
+		.name		= "dm6446",
+	},
+};
+
+static void __iomem *dm644x_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm644x_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm644x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm644x_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm644x = {
+	.io_desc		= dm644x_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm644x_ids,
+	.ids_num		= ARRAY_SIZE(dm644x_ids),
+	.cpu_clks		= dm644x_clks,
+	.psc_bases		= dm644x_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm644x_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm644x_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios 	= dm644x_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm644x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 71,
+	.gpio_irq		= IRQ_GPIOBNK0,
+	.serial_dev		= &dm644x_serial_device,
+	.emac_pdata		= &dm644x_emac_pdata,
+	.sram_dma		= 0x00008000,
+	.sram_len		= SZ_16K,
+};
+
 void __init dm644x_init(void)
 {
-	davinci_clk_init(dm644x_clks);
-	davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+	davinci_common_init(&davinci_soc_info_dm644x);
 }
 
 static int __init dm644x_init_devices(void)
@@ -456,6 +651,7 @@ static int __init dm644x_init_devices(void)
 		return 0;
 
 	platform_device_register(&dm644x_edma_device);
+	platform_device_register(&dm644x_emac_device);
 	return 0;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
new file mode 100644
index 00000000000..334f0711e0f
--- /dev/null
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -0,0 +1,636 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm646x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM646X_REF_FREQ		27000000
+#define DM646X_AUX_FREQ		24000000
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.rate = DM646X_REF_FREQ,
+};
+
+static struct clk aux_clkin = {
+	.name = "aux_clkin",
+	.rate = DM646X_AUX_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.pll_data = &pll1_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name = "pll1_sysclk4",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name = "pll1_sysclk5",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name = "pll1_sysclk6",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV6,
+};
+
+static struct clk pll1_sysclk8 = {
+	.name = "pll1_sysclk8",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+	.name = "pll1_sysclk9",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV9,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2_clk",
+	.parent = &ref_clk,
+	.pll_data = &pll2_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk dsp_clk = {
+	.name = "dsp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DM646X_LPSC_C64X_CPU,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+	.name = "arm",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &aux_clkin,
+	.lpsc = DM646X_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+	.name = "I2CCLK",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_I2C,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_AEMIF,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+	.name = "emac",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_EMAC,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_PWM0,
+	.usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_PWM1,
+	.usecount = 1,            /* REVIST: disabling hangs system */
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_sysclk3,
+	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
+};
+
+static struct clk vpif0_clk = {
+	.name = "vpif0",
+	.parent = &ref_clk,
+	.lpsc = DM646X_LPSC_VPSSMSTR,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk vpif1_clk = {
+	.name = "vpif1",
+	.parent = &ref_clk,
+	.lpsc = DM646X_LPSC_VPSSSLV,
+	.flags = ALWAYS_ENABLED,
+};
+
+struct davinci_clk dm646x_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "aux", &aux_clkin),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
+	CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "dsp", &dsp_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "vpif0", &vpif0_clk),
+	CLK(NULL, "vpif1", &vpif1_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+static struct emac_platform_data dm646x_emac_pdata = {
+	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM646X_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM646X_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM646X_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM646X_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct resource dm646x_emac_resources[] = {
+	{
+		.start	= DM646X_EMAC_BASE,
+		.end	= DM646X_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DM646X_EMACRXTHINT,
+		.end	= IRQ_DM646X_EMACRXTHINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACRXINT,
+		.end	= IRQ_DM646X_EMACRXINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACTXINT,
+		.end	= IRQ_DM646X_EMACTXINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_EMACMISCINT,
+		.end	= IRQ_DM646X_EMACMISCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm646x_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &dm646x_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(dm646x_emac_resources),
+	.resource	= dm646x_emac_resources,
+};
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm646x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM646X, ATAEN,		0,   0,     1,	  1,	 true)
+
+MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
+
+MUX_CFG(DM646X, AUDCK0,		0,   28,    1,	  0,	 false)
+
+MUX_CFG(DM646X, CRGMUX,			0,   24,    7,    5,	 true)
+
+MUX_CFG(DM646X, STSOMUX_DISABLE,	0,   22,    3,    0,	 true)
+
+MUX_CFG(DM646X, STSIMUX_DISABLE,	0,   20,    3,    0,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_DISABLE,	0,   18,    3,    0,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_DISABLE,	0,   16,    3,    0,	 true)
+
+MUX_CFG(DM646X, STSOMUX,		0,   22,    3,    2,	 true)
+
+MUX_CFG(DM646X, STSIMUX,		0,   20,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_PARALLEL,	0,   18,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_PARALLEL,	0,   16,    3,    2,	 true)
+
+MUX_CFG(DM646X, PTSOMUX_SERIAL,		0,   18,    3,    3,	 true)
+
+MUX_CFG(DM646X, PTSIMUX_SERIAL,		0,   16,    3,    3,	 true)
+#endif
+};
+
+static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM646X_VP_VERTINT0]        = 7,
+	[IRQ_DM646X_VP_VERTINT1]        = 7,
+	[IRQ_DM646X_VP_VERTINT2]        = 7,
+	[IRQ_DM646X_VP_VERTINT3]        = 7,
+	[IRQ_DM646X_VP_ERRINT]          = 7,
+	[IRQ_DM646X_RESERVED_1]         = 7,
+	[IRQ_DM646X_RESERVED_2]         = 7,
+	[IRQ_DM646X_WDINT]              = 7,
+	[IRQ_DM646X_CRGENINT0]          = 7,
+	[IRQ_DM646X_CRGENINT1]          = 7,
+	[IRQ_DM646X_TSIFINT0]           = 7,
+	[IRQ_DM646X_TSIFINT1]           = 7,
+	[IRQ_DM646X_VDCEINT]            = 7,
+	[IRQ_DM646X_USBINT]             = 7,
+	[IRQ_DM646X_USBDMAINT]          = 7,
+	[IRQ_DM646X_PCIINT]             = 7,
+	[IRQ_CCINT0]                    = 7,    /* dma */
+	[IRQ_CCERRINT]                  = 7,    /* dma */
+	[IRQ_TCERRINT0]                 = 7,    /* dma */
+	[IRQ_TCERRINT]                  = 7,    /* dma */
+	[IRQ_DM646X_TCERRINT2]          = 7,
+	[IRQ_DM646X_TCERRINT3]          = 7,
+	[IRQ_DM646X_IDE]                = 7,
+	[IRQ_DM646X_HPIINT]             = 7,
+	[IRQ_DM646X_EMACRXTHINT]        = 7,
+	[IRQ_DM646X_EMACRXINT]          = 7,
+	[IRQ_DM646X_EMACTXINT]          = 7,
+	[IRQ_DM646X_EMACMISCINT]        = 7,
+	[IRQ_DM646X_MCASP0TXINT]        = 7,
+	[IRQ_DM646X_MCASP0RXINT]        = 7,
+	[IRQ_AEMIFINT]                  = 7,
+	[IRQ_DM646X_RESERVED_3]         = 7,
+	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
+	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
+	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
+	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
+	[IRQ_PWMINT0]                   = 7,
+	[IRQ_PWMINT1]                   = 7,
+	[IRQ_DM646X_VLQINT]             = 7,
+	[IRQ_I2C]                       = 7,
+	[IRQ_UARTINT0]                  = 7,
+	[IRQ_UARTINT1]                  = 7,
+	[IRQ_DM646X_UARTINT2]           = 7,
+	[IRQ_DM646X_SPINT0]             = 7,
+	[IRQ_DM646X_SPINT1]             = 7,
+	[IRQ_DM646X_DSP2ARMINT]         = 7,
+	[IRQ_DM646X_RESERVED_4]         = 7,
+	[IRQ_DM646X_PSCINT]             = 7,
+	[IRQ_DM646X_GPIO0]              = 7,
+	[IRQ_DM646X_GPIO1]              = 7,
+	[IRQ_DM646X_GPIO2]              = 7,
+	[IRQ_DM646X_GPIO3]              = 7,
+	[IRQ_DM646X_GPIO4]              = 7,
+	[IRQ_DM646X_GPIO5]              = 7,
+	[IRQ_DM646X_GPIO6]              = 7,
+	[IRQ_DM646X_GPIO7]              = 7,
+	[IRQ_DM646X_GPIOBNK0]           = 7,
+	[IRQ_DM646X_GPIOBNK1]           = 7,
+	[IRQ_DM646X_GPIOBNK2]           = 7,
+	[IRQ_DM646X_DDRINT]             = 7,
+	[IRQ_DM646X_AEMIFINT]           = 7,
+	[IRQ_COMMTX]                    = 7,
+	[IRQ_COMMRX]                    = 7,
+	[IRQ_EMUINT]                    = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm646x_no_event[] = {
+	 0,  1,  2,  3, 13,
+	14, 15, 24, 25, 26,
+	27, 30, 31, 54, 55,
+	56,
+	-1
+};
+
+static struct edma_soc_info dm646x_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 6,	/* 0-1, 4-7 */
+	.n_slot		= 512,
+	.n_tc		= 4,
+	.noevent	= dma_chan_dm646x_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= 0x01c10800,
+		.end	= 0x01c10800 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc3",
+		.start	= 0x01c10c00,
+		.end	= 0x01c10c00 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm646x_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm646x_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm646x_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm646x_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb770,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6467,
+		.name		= "dm6467",
+	},
+};
+
+static void __iomem *dm646x_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
+ * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top   :  <unused>
+ */
+struct davinci_timer_info dm646x_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART2_BASE,
+		.irq		= IRQ_DM646X_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm646x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm646x_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm646x = {
+	.io_desc		= dm646x_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm646x_ids,
+	.ids_num		= ARRAY_SIZE(dm646x_ids),
+	.cpu_clks		= dm646x_clks,
+	.psc_bases		= dm646x_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm646x_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm646x_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm646x_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm646x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 43, /* Only 33 usable */
+	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
+	.serial_dev		= &dm646x_serial_device,
+	.emac_pdata		= &dm646x_emac_pdata,
+	.sram_dma		= 0x10010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm646x_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm646x);
+}
+
+static int __init dm646x_init_devices(void)
+{
+	if (!cpu_is_davinci_dm646x())
+		return 0;
+
+	platform_device_register(&dm646x_edma_device);
+	platform_device_register(&dm646x_emac_device);
+	return 0;
+}
+postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1aba41c6351..1b6532159c5 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -23,6 +23,7 @@
 #include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
@@ -37,14 +38,13 @@ struct davinci_gpio {
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
-static unsigned __initdata ngpio;
-
 /* create a non-inlined version */
 static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
 {
 	return __gpio_to_controller(gpio);
 }
 
+static int __init davinci_gpio_irq_setup(void);
 
 /*--------------------------------------------------------------------------*/
 
@@ -115,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int __init davinci_gpio_setup(void)
 {
 	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-	/* The gpio banks conceptually expose a segmented bitmap,
+	/*
+	 * The gpio banks conceptually expose a segmented bitmap,
 	 * and "ngpio" is one more than the largest zero-based
 	 * bit index that's valid.
 	 */
-	if (cpu_is_davinci_dm355()) {		/* or dm335() */
-		ngpio = 104;
-	} else if (cpu_is_davinci_dm644x()) {	/* or dm337() */
-		ngpio = 71;
-	} else if (cpu_is_davinci_dm646x()) {
-		/* NOTE:  each bank has several "reserved" bits,
-		 * unusable as GPIOs.  Only 33 of the GPIO numbers
-		 * are usable, and we're not rejecting the others.
-		 */
-		ngpio = 43;
-	} else {
-		/* if cpu_is_davinci_dm643x() ngpio = 111 */
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
 		pr_err("GPIO setup:  how many GPIOs?\n");
 		return -EINVAL;
 	}
@@ -157,6 +150,7 @@ static int __init davinci_gpio_setup(void)
 		gpiochip_add(&chips[i].chip);
 	}
 
+	davinci_gpio_irq_setup();
 	return 0;
 }
 pure_initcall(davinci_gpio_setup);
@@ -187,10 +181,15 @@ static void gpio_irq_enable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
 	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	unsigned status = irq_desc[irq].status;
+
+	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+	if (!status)
+		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
 
-	if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+	if (status & IRQ_TYPE_EDGE_FALLING)
 		__raw_writel(mask, &g->set_falling);
-	if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+	if (status & IRQ_TYPE_EDGE_RISING)
 		__raw_writel(mask, &g->set_rising);
 }
 
@@ -205,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger)
 	irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
 	irq_desc[irq].status |= trigger;
 
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
-		     ? &g->set_falling : &g->clr_falling);
-	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
-		     ? &g->set_rising : &g->clr_rising);
+	/* don't enable the IRQ if it's currently disabled */
+	if (irq_desc[irq].depth == 0) {
+		__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+			     ? &g->set_falling : &g->clr_falling);
+		__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+			     ? &g->set_rising : &g->clr_rising);
+	}
 	return 0;
 }
 
@@ -230,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		mask <<= 16;
 
 	/* temporarily mask (level sensitive) parent IRQ */
+	desc->chip->mask(irq);
 	desc->chip->ack(irq);
 	while (1) {
 		u32		status;
@@ -268,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 static int __init davinci_gpio_irq_setup(void)
 {
 	unsigned	gpio, irq, bank;
-	unsigned	bank_irq;
 	struct clk	*clk;
 	u32		binten = 0;
+	unsigned	ngpio, bank_irq;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	ngpio = soc_info->gpio_num;
 
-	if (cpu_is_davinci_dm355()) {		/* or dm335() */
-		bank_irq = IRQ_DM355_GPIOBNK0;
-	} else if (cpu_is_davinci_dm644x()) {
-		bank_irq = IRQ_GPIOBNK0;
-	} else if (cpu_is_davinci_dm646x()) {
-		bank_irq = IRQ_DM646X_GPIOBNK0;
-	} else {
+	bank_irq = soc_info->gpio_irq;
+	if (bank_irq == 0) {
 		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
 		return -EINVAL;
 	}
@@ -318,11 +319,9 @@ static int __init davinci_gpio_irq_setup(void)
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(binten, (void *__iomem)
-		     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+	__raw_writel(binten, soc_info->gpio_base + 0x08);
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
-arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
deleted file mode 100644
index 018b994cd79..00000000000
--- a/arch/arm/mach-davinci/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Davinci CPU identification code
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * Derived from OMAP1 CPU identification code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define JTAG_ID_BASE		IO_ADDRESS(0x01c40028)
-
-static unsigned int davinci_revision;
-
-struct davinci_id {
-	u8	variant;	/* JTAG ID bits 31:28 */
-	u16	part_no;	/* JTAG ID bits 27:12 */
-	u32	manufacturer;	/* JTAG ID bits 11:1 */
-	u32	type;		/* Cpu id bits [31:8], cpu class bits [7:0] */
-};
-
-/* Register values to detect the DaVinci version */
-static struct davinci_id davinci_ids[] __initdata = {
-	{
-		/* DM6446 */
-		.part_no      = 0xb700,
-		.variant      = 0x0,
-		.manufacturer = 0x017,
-		.type	      = 0x64460000,
-	},
-	{
-		/* DM646X */
-		.part_no      = 0xb770,
-		.variant      = 0x0,
-		.manufacturer = 0x017,
-		.type         = 0x64670000,
-	},
-	{
-		/* DM355 */
-		.part_no	= 0xb73b,
-		.variant	= 0x0,
-		.manufacturer	= 0x00f,
-		.type		= 0x03550000,
-	},
-};
-
-/*
- * Get Device Part No. from JTAG ID register
- */
-static u16 __init davinci_get_part_no(void)
-{
-	u32 dev_id, part_no;
-
-	dev_id = __raw_readl(JTAG_ID_BASE);
-
-	part_no = ((dev_id >> 12) & 0xffff);
-
-	return part_no;
-}
-
-/*
- * Get Device Revision from JTAG ID register
- */
-static u8 __init davinci_get_variant(void)
-{
-	u32 variant;
-
-	variant = __raw_readl(JTAG_ID_BASE);
-
-	variant = (variant >> 28) & 0xf;
-
-	return variant;
-}
-
-unsigned int davinci_rev(void)
-{
-	return davinci_revision >> 16;
-}
-EXPORT_SYMBOL(davinci_rev);
-
-void __init davinci_check_revision(void)
-{
-	int i;
-	u16 part_no;
-	u8 variant;
-
-	part_no = davinci_get_part_no();
-	variant = davinci_get_variant();
-
-	/* First check only the major version in a safe way */
-	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-		if (part_no == (davinci_ids[i].part_no)) {
-			davinci_revision = davinci_ids[i].type;
-			break;
-		}
-	}
-
-	/* Check if we can find the dev revision */
-	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
-		if (part_no == davinci_ids[i].part_no &&
-		    variant == davinci_ids[i].variant) {
-			davinci_revision = davinci_ids[i].type;
-			break;
-		}
-	}
-
-	printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
-	       davinci_rev(), variant);
-}
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
deleted file mode 100644
index 3216f21c123..00000000000
--- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci DM6446 EVM board specific headers
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or ifndef.
- */
-
-#ifndef _MACH_DAVINCI_DM6446EVM_H
-#define _MACH_DAVINCI_DM6446EVM_H
-
-#include <linux/types.h>
-
-int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
-int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 19177097625..a1f03b606d8 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -17,7 +17,8 @@ struct sys_timer;
 extern struct sys_timer davinci_timer;
 
 extern void davinci_irq_init(void);
-extern void davinci_map_common_io(void);
+extern void __iomem *davinci_intc_base;
+extern int davinci_intc_type;
 
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
@@ -25,4 +26,56 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 
+struct davinci_timer_instance {
+	void __iomem	*base;
+	u32		bottom_irq;
+	u32		top_irq;
+	unsigned long	cmp_off;
+	unsigned int	cmp_irq;
+};
+
+struct davinci_timer_info {
+	struct davinci_timer_instance	*timers;
+	unsigned int			clockevent_id;
+	unsigned int			clocksource_id;
+};
+
+/* SoC specific init support */
+struct davinci_soc_info {
+	struct map_desc			*io_desc;
+	unsigned long			io_desc_num;
+	u32				cpu_id;
+	u32				jtag_id;
+	void __iomem			*jtag_id_base;
+	struct davinci_id		*ids;
+	unsigned long			ids_num;
+	struct davinci_clk		*cpu_clks;
+	void __iomem			**psc_bases;
+	unsigned long			psc_bases_num;
+	void __iomem			*pinmux_base;
+	const struct mux_config		*pinmux_pins;
+	unsigned long			pinmux_pins_num;
+	void __iomem			*intc_base;
+	int				intc_type;
+	u8				*intc_irq_prios;
+	unsigned long			intc_irq_num;
+	struct davinci_timer_info	*timer_info;
+	void __iomem			*wdt_base;
+	void __iomem			*gpio_base;
+	unsigned			gpio_num;
+	unsigned			gpio_irq;
+	struct platform_device		*serial_dev;
+	struct emac_platform_data	*emac_pdata;
+	dma_addr_t			sram_dma;
+	unsigned			sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(struct davinci_soc_info *soc_info);
+
+/* standard place to map on-chip SRAMs; they *may* support DMA */
+#define SRAM_VIRT	0xfffe0000
+#define SRAM_SIZE	SZ_128K
+
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
new file mode 100644
index 00000000000..c4d27eec806
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -0,0 +1,57 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) definitions
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __ASM_HARDWARE_CP_INTC_H
+#define __ASM_HARDWARE_CP_INTC_H
+
+#define CP_INTC_REV			0x00
+#define CP_INTC_CTRL			0x04
+#define CP_INTC_HOST_CTRL		0x0C
+#define CP_INTC_GLOBAL_ENABLE		0x10
+#define CP_INTC_GLOBAL_NESTING_LEVEL	0x1C
+#define CP_INTC_SYS_STAT_IDX_SET	0x20
+#define CP_INTC_SYS_STAT_IDX_CLR	0x24
+#define CP_INTC_SYS_ENABLE_IDX_SET	0x28
+#define CP_INTC_SYS_ENABLE_IDX_CLR	0x2C
+#define CP_INTC_GLOBAL_WAKEUP_ENABLE	0x30
+#define CP_INTC_HOST_ENABLE_IDX_SET	0x34
+#define CP_INTC_HOST_ENABLE_IDX_CLR	0x38
+#define CP_INTC_PACING_PRESCALE 	0x40
+#define CP_INTC_VECTOR_BASE		0x50
+#define CP_INTC_VECTOR_SIZE		0x54
+#define CP_INTC_VECTOR_NULL		0x58
+#define CP_INTC_PRIO_IDX		0x80
+#define CP_INTC_PRIO_VECTOR		0x84
+#define CP_INTC_SECURE_ENABLE		0x90
+#define CP_INTC_SECURE_PRIO_IDX 	0x94
+#define CP_INTC_PACING_PARAM(n) 	(0x0100 + (n << 4))
+#define CP_INTC_PACING_DEC(n)		(0x0104 + (n << 4))
+#define CP_INTC_PACING_MAP(n)		(0x0108 + (n << 4))
+#define CP_INTC_SYS_RAW_STAT(n) 	(0x0200 + (n << 2))
+#define CP_INTC_SYS_STAT_CLR(n) 	(0x0280 + (n << 2))
+#define CP_INTC_SYS_ENABLE_SET(n)	(0x0300 + (n << 2))
+#define CP_INTC_SYS_ENABLE_CLR(n)	(0x0380 + (n << 2))
+#define CP_INTC_CHAN_MAP(n)		(0x0400 + (n << 2))
+#define CP_INTC_HOST_MAP(n)		(0x0800 + (n << 2))
+#define CP_INTC_HOST_PRIO_IDX(n)	(0x0900 + (n << 2))
+#define CP_INTC_SYS_POLARITY(n) 	(0x0D00 + (n << 2))
+#define CP_INTC_SYS_TYPE(n)		(0x0D80 + (n << 2))
+#define CP_INTC_WAKEUP_ENABLE(n)	(0x0E00 + (n << 2))
+#define CP_INTC_DEBUG_SELECT(n) 	(0x0F00 + (n << 2))
+#define CP_INTC_SYS_SECURE_ENABLE(n)	(0x1000 + (n << 2))
+#define CP_INTC_HOST_NESTING_LEVEL(n)	(0x1100 + (n << 2))
+#define CP_INTC_HOST_ENABLE(n)		(0x1500 + (n << 2))
+#define CP_INTC_HOST_PRIO_VECTOR(n)	(0x1600 + (n << 2))
+#define CP_INTC_VECTOR_ADDR(n)		(0x2000 + (n << 2))
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+			 u8 *irq_prio);
+
+#endif	/* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 27cfb1b3a66..d12a5ed2959 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -16,17 +16,30 @@
 #ifndef _ASM_ARCH_CPU_H
 #define _ASM_ARCH_CPU_H
 
-extern unsigned int davinci_rev(void);
+#include <mach/common.h>
 
-#define IS_DAVINCI_CPU(type, id)			\
-static inline int is_davinci_dm ##type(void)	        \
-{							\
-	return (davinci_rev() == (id)) ? 1 : 0;	        \
+struct davinci_id {
+	u8	variant;	/* JTAG ID bits 31:28 */
+	u16	part_no;	/* JTAG ID bits 27:12 */
+	u16	manufacturer;	/* JTAG ID bits 11:1 */
+	u32	cpu_id;
+	char	*name;
+};
+
+/* Can use lower 16 bits of cpu id  for a variant when required */
+#define	DAVINCI_CPU_ID_DM6446		0x64460000
+#define	DAVINCI_CPU_ID_DM6467		0x64670000
+#define	DAVINCI_CPU_ID_DM355		0x03550000
+
+#define IS_DAVINCI_CPU(type, id)					\
+static inline int is_davinci_ ##type(void)				\
+{									\
+	return (davinci_soc_info.cpu_id == (id));			\
 }
 
-IS_DAVINCI_CPU(644x, 0x6446)
-IS_DAVINCI_CPU(646x, 0x6467)
-IS_DAVINCI_CPU(355, 0x355)
+IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
+IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
+IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d5d06..de3fc2182b4 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -9,6 +9,16 @@
  * or implied.
  */
 
+/* Modifications
+ * Jan 2009	Chaithrika U S	Added senduart, busyuart, waituart
+ *				macros, based on debug-8250.S file
+ *				but using 32-bit accesses required for
+ *                              some davinci devices.
+ */
+
+#include <linux/serial_reg.h>
+#define UART_SHIFT	2
+
 		.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
@@ -17,5 +27,22 @@
 		orr	\rx, \rx, #0x00c20000   @ UART 0
 		.endm
 
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001:		ldr	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+#endif
+		.endm
+
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
new file mode 100644
index 00000000000..54903b72438
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -0,0 +1,22 @@
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+struct spi_board_info;
+
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 3dcb9f4e58b..15d42b92a8c 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -24,6 +24,7 @@
 
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
+#include <mach/emac.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
new file mode 100644
index 00000000000..1fc764c8646
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -0,0 +1,26 @@
+/*
+ * Chip specific defines for DM646x SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM646X_H
+#define __ASM_ARCH_DM646X_H
+
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM646X_EMAC_BASE		(0x01C80000)
+#define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
+#define DM646X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
+#define DM646X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
+#define DM646X_EMAC_MDIO_OFFSET		(0x4000)
+#define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm646x_init(void);
+
+#endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index f6fc5396daf..24a379239d7 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel);
 void edma_pause(unsigned channel);
 void edma_resume(unsigned channel);
 
-/* UNRELATED TO DMA */
-int davinci_alloc_iram(unsigned size);
-void davinci_free_iram(unsigned addr, unsigned size);
-
 /* platform_data for EDMA driver */
 struct edma_soc_info {
 
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
new file mode 100644
index 00000000000..beff4fb7c84
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/emac.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _MACH_DAVINCI_EMAC_H
+#define _MACH_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+	char mac_addr[ETH_ALEN];
+	u32 ctrl_reg_offset;
+	u32 ctrl_mod_reg_offset;
+	u32 ctrl_ram_offset;
+	u32 mdio_reg_offset;
+	u32 ctrl_ram_size;
+	u32 phy_mask;
+	u32 mdio_max_freq;
+	u8 rmii_en;
+	u8 version;
+};
+
+enum {
+	EMAC_VERSION_1,	/* DM644x */
+	EMAC_VERSION_2,	/* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 039b84f933b..fbdebc7cb40 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -15,17 +15,36 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+		ldr \base, =davinci_intc_base
+		ldr \base, [\base]
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
+		ldr \tmp, =davinci_intc_type
+		ldr \tmp, [\tmp]
+		cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
+		beq 1001f
+#endif
+#if defined(CONFIG_AINTC)
 		ldr \tmp, [\base, #0x14]
-		mov \tmp, \tmp, lsr #2
+		movs \tmp, \tmp, lsr #2
 		sub \irqnr, \tmp, #1
-		cmp \tmp, #0
+		b 1002f
+#endif
+#if defined(CONFIG_CP_INTC)
+1001:		ldr \irqnr, [\base, #0x80] /* get irq number */
+		and \irqnr, \irqnr, #0xff  /* irq is in bits 0-9 */
+		mov \tmp, \irqnr, lsr #3
+		and \tmp, \tmp, #0xfc
+		add \tmp, \tmp, #0x280 /* get the register offset */
+		ldr \irqstat, [\base, \tmp] /* get the intc status */
+		cmp \irqstat, #0x0
+#endif
+1002:
 		.endm
 
 		.macro	irq_prio_table
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index efe3281364e..ae074556831 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -17,6 +17,7 @@
 #include <asm-generic/gpio.h>
 
 #include <mach/irqs.h>
+#include <mach/common.h>
 
 #define DAVINCI_GPIO_BASE 0x01C67000
 
@@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem
 __gpio_to_controller(unsigned gpio)
 {
 	void *__iomem ptr;
+	void __iomem *base = davinci_soc_info.gpio_base;
 
 	if (gpio < 32 * 1)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+		ptr = base + 0x10;
 	else if (gpio < 32 * 2)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+		ptr = base + 0x38;
 	else if (gpio < 32 * 3)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+		ptr = base + 0x60;
 	else if (gpio < 32 * 4)
-		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
+		ptr = base + 0x88;
 	else
 		ptr = NULL;
 	return ptr;
@@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio)
 {
 	if (gpio >= DAVINCI_N_GPIO)
 		return -EINVAL;
-	return DAVINCI_N_AINTC_IRQ + gpio;
+	return davinci_soc_info.intc_irq_num + gpio;
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
 	/* caller guarantees gpio_to_irq() succeeded */
-	return irq - DAVINCI_N_AINTC_IRQ;
+	return irq - davinci_soc_info.intc_irq_num;
 }
 
 #endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 18066074c99..bc5d6aaa69a 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -30,6 +30,9 @@
 /* Base address */
 #define DAVINCI_ARM_INTC_BASE 0x01C48000
 
+#define DAVINCI_INTC_TYPE_AINTC		0
+#define DAVINCI_INTC_TYPE_CP_INTC	1
+
 /* Interrupt lines */
 #define IRQ_VDINT0       0
 #define IRQ_VDINT1       1
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 86c25c7f3ce..c712c7cdf38 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -21,7 +21,6 @@
  * Definitions
  **************************************************************************/
 #define DAVINCI_DDR_BASE    0x80000000
-#define DAVINCI_IRAM_BASE   0x00008000 /* ARM Internal RAM */
 
 #define PHYS_OFFSET DAVINCI_DDR_BASE
 
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
new file mode 100644
index 00000000000..5a85e24f367
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -0,0 +1,33 @@
+/*
+ *  Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+	/* get_cd()/get_wp() may sleep */
+	int	(*get_cd)(int module);
+	int	(*get_ro)(int module);
+	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+	u8	wires;
+
+	u32     max_freq;
+
+	/* any additional host capabilities: OR'd in to mmc->f_caps */
+	u32     caps;
+
+	/* Version of the MMC/SD controller */
+	u8	version;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+	MMC_CTLR_VERSION_1 = 0,	/* DM644x and DM355 */
+	MMC_CTLR_VERSION_2,	/* DA830 */
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bae22cb3e27..27378458542 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -19,16 +19,6 @@
 #ifndef __INC_MACH_MUX_H
 #define __INC_MACH_MUX_H
 
-/* System module registers */
-#define PINMUX0			0x00
-#define PINMUX1			0x04
-/* dm355 only */
-#define PINMUX2			0x08
-#define PINMUX3			0x0c
-#define PINMUX4			0x10
-#define INTMUX			0x18
-#define EVTMUX			0x1c
-
 struct mux_config {
 	const char *name;
 	const char *mux_reg_name;
@@ -168,15 +158,9 @@ enum davinci_dm355_index {
 
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
-extern void davinci_mux_init(void);
-extern int davinci_mux_register(const struct mux_config *pins,
-				unsigned long size);
 extern int davinci_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline void davinci_mux_init(void) {}
-static inline int davinci_mux_register(const struct mux_config *pins,
-				       unsigned long size) { return 0; }
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 55a90d419fa..ab8a2586d1c 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -27,6 +27,8 @@
 #ifndef __ASM_ARCH_PSC_H
 #define __ASM_ARCH_PSC_H
 
+#define	DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01C41000
+
 /* Power and Sleep Controller (PSC) Domains */
 #define DAVINCI_GPSC_ARMDOMAIN      0
 #define DAVINCI_GPSC_DSPDOMAIN      1
@@ -116,8 +118,8 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
-extern int davinci_psc_is_clk_active(unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int id,
-			       char enable);
+extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+		unsigned int id, char enable);
 
 #endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 632847d74a1..794fa5cf93c 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,8 +18,6 @@
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
 
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
@@ -30,6 +28,6 @@ struct davinci_uart_config {
 	unsigned int enabled_uarts;
 };
 
-extern void davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_init(struct davinci_uart_config *);
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h
new file mode 100644
index 00000000000..111f7cc71e0
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/sram.h
@@ -0,0 +1,27 @@
+/*
+ * mach/sram.h - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_SRAM_H
+#define __MACH_SRAM_H
+
+/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY	512
+
+/*
+ * SRAM allocations return a CPU virtual address, or NULL on error.
+ * If a DMA address is requested and the SRAM supports DMA, its
+ * mapped address is also returned.
+ *
+ * Errors include SRAM memory not being available, and requesting
+ * DMA mapped SRAM on systems which don't allow that.
+ */
+extern void *sram_alloc(size_t len, dma_addr_t *dma);
+extern void sram_free(void *addr, size_t len);
+
+#endif /* __MACH_SRAM_H */
diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h
new file mode 100644
index 00000000000..1c971d8d8ba
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/time.h
@@ -0,0 +1,35 @@
+/*
+ * Local header file for DaVinci time code.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
+#define __ARCH_ARM_MACH_DAVINCI_TIME_H
+
+#define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE		(IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
+
+enum {
+	T0_BOT,
+	T0_TOP,
+	T1_BOT,
+	T1_TOP,
+	NUM_TIMERS
+};
+
+#define IS_TIMER1(id)		(id & 0x2)
+#define IS_TIMER0(id)		(!IS_TIMER1(id))
+#define IS_TIMER_TOP(id)	((id & 0x1))
+#define IS_TIMER_BOT(id)	(!IS_TIMER_TOP(id))
+
+#define ID_TO_TIMER(id)		(IS_TIMER1(id) != 0)
+
+extern struct davinci_timer_instance davinci_timer_instance[];
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8c165def37b..1e27475f9a2 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -13,11 +13,24 @@
 #include <linux/serial_reg.h>
 #include <mach/serial.h>
 
+#include <asm/mach-types.h>
+
+extern unsigned int __machine_arch_type;
+
+static u32 *uart;
+
+static u32 *get_uart_base(void)
+{
+	/* Add logic here for new platforms, using __macine_arch_type */
+	return (u32 *)DAVINCI_UART0_BASE;
+}
+
 /* PORT_16C550A, in polled non-fifo mode */
 
 static void putc(char c)
 {
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	if (!uart)
+		uart = get_uart_base();
 
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
@@ -26,7 +39,9 @@ static void putc(char c)
 
 static inline void flush(void)
 {
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	if (!uart)
+		uart = get_uart_base();
+
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
 }
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index a548abb513e..49912b48b1b 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -9,47 +9,9 @@
  */
 
 #include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/io.h>
 
 #include <asm/tlb.h>
-#include <asm/memory.h>
-
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-
-extern void davinci_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc davinci_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init davinci_map_common_io(void)
-{
-	iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
-
-	/* Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	/* We want to check CPU revision early for cpu_is_xxxx() macros.
-	 * IO space mapping must be initialized before we can do that.
-	 */
-	davinci_check_revision();
-}
 
 #define BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p, pst, vst)	((void __iomem *)((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 5a324c90e29..af92ffee847 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -26,6 +26,7 @@
 
 #include <mach/hardware.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
 #include <asm/mach/irq.h>
 
 #define IRQ_BIT(irq)		((irq) & 0x1f)
@@ -41,18 +42,14 @@
 #define IRQ_INTPRI0_REG_OFFSET	0x0030
 #define IRQ_INTPRI7_REG_OFFSET	0x004C
 
-const u8 *davinci_def_priorities;
-
-#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-
 static inline unsigned int davinci_irq_readl(int offset)
 {
-	return __raw_readl(INTC_BASE + offset);
+	return __raw_readl(davinci_intc_base + offset);
 }
 
 static inline void davinci_irq_writel(unsigned long value, int offset)
 {
-	__raw_writel(value, INTC_BASE + offset);
+	__raw_writel(value, davinci_intc_base + offset);
 }
 
 /* Disable interrupt */
@@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = {
 	.unmask = davinci_unmask_irq,
 };
 
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
-	[IRQ_VDINT0]		= 2,
-	[IRQ_VDINT1]		= 6,
-	[IRQ_VDINT2]		= 6,
-	[IRQ_HISTINT]		= 6,
-	[IRQ_H3AINT]		= 6,
-	[IRQ_PRVUINT]		= 6,
-	[IRQ_RSZINT]		= 6,
-	[7]			= 7,
-	[IRQ_VENCINT]		= 6,
-	[IRQ_ASQINT]		= 6,
-	[IRQ_IMXINT]		= 6,
-	[IRQ_VLCDINT]		= 6,
-	[IRQ_USBINT]		= 4,
-	[IRQ_EMACINT]		= 4,
-	[14]			= 7,
-	[15]			= 7,
-	[IRQ_CCINT0]		= 5,	/* dma */
-	[IRQ_CCERRINT]		= 5,	/* dma */
-	[IRQ_TCERRINT0]		= 5,	/* dma */
-	[IRQ_TCERRINT]		= 5,	/* dma */
-	[IRQ_PSCIN]		= 7,
-	[21]			= 7,
-	[IRQ_IDE]		= 4,
-	[23]			= 7,
-	[IRQ_MBXINT]		= 7,
-	[IRQ_MBRINT]		= 7,
-	[IRQ_MMCINT]		= 7,
-	[IRQ_SDIOINT]		= 7,
-	[28]			= 7,
-	[IRQ_DDRINT]		= 7,
-	[IRQ_AEMIFINT]		= 7,
-	[IRQ_VLQINT]		= 4,
-	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
-	[IRQ_PWMINT0]		= 7,
-	[IRQ_PWMINT1]		= 7,
-	[IRQ_PWMINT2]		= 7,
-	[IRQ_I2C]		= 3,
-	[IRQ_UARTINT0]		= 3,
-	[IRQ_UARTINT1]		= 3,
-	[IRQ_UARTINT2]		= 3,
-	[IRQ_SPINT0]		= 3,
-	[IRQ_SPINT1]		= 3,
-	[45]			= 7,
-	[IRQ_DSP2ARM0]		= 4,
-	[IRQ_DSP2ARM1]		= 4,
-	[IRQ_GPIO0]		= 7,
-	[IRQ_GPIO1]		= 7,
-	[IRQ_GPIO2]		= 7,
-	[IRQ_GPIO3]		= 7,
-	[IRQ_GPIO4]		= 7,
-	[IRQ_GPIO5]		= 7,
-	[IRQ_GPIO6]		= 7,
-	[IRQ_GPIO7]		= 7,
-	[IRQ_GPIOBNK0]		= 7,
-	[IRQ_GPIOBNK1]		= 7,
-	[IRQ_GPIOBNK2]		= 7,
-	[IRQ_GPIOBNK3]		= 7,
-	[IRQ_GPIOBNK4]		= 7,
-	[IRQ_COMMTX]		= 7,
-	[IRQ_COMMRX]		= 7,
-	[IRQ_EMUINT]		= 7,
-};
-
-static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM646X_VP_VERTINT0]        = 7,
-	[IRQ_DM646X_VP_VERTINT1]        = 7,
-	[IRQ_DM646X_VP_VERTINT2]        = 7,
-	[IRQ_DM646X_VP_VERTINT3]        = 7,
-	[IRQ_DM646X_VP_ERRINT]          = 7,
-	[IRQ_DM646X_RESERVED_1]         = 7,
-	[IRQ_DM646X_RESERVED_2]         = 7,
-	[IRQ_DM646X_WDINT]              = 7,
-	[IRQ_DM646X_CRGENINT0]          = 7,
-	[IRQ_DM646X_CRGENINT1]          = 7,
-	[IRQ_DM646X_TSIFINT0]           = 7,
-	[IRQ_DM646X_TSIFINT1]           = 7,
-	[IRQ_DM646X_VDCEINT]            = 7,
-	[IRQ_DM646X_USBINT]             = 7,
-	[IRQ_DM646X_USBDMAINT]          = 7,
-	[IRQ_DM646X_PCIINT]             = 7,
-	[IRQ_CCINT0]                    = 7,    /* dma */
-	[IRQ_CCERRINT]                  = 7,    /* dma */
-	[IRQ_TCERRINT0]                 = 7,    /* dma */
-	[IRQ_TCERRINT]                  = 7,    /* dma */
-	[IRQ_DM646X_TCERRINT2]          = 7,
-	[IRQ_DM646X_TCERRINT3]          = 7,
-	[IRQ_DM646X_IDE]                = 7,
-	[IRQ_DM646X_HPIINT]             = 7,
-	[IRQ_DM646X_EMACRXTHINT]        = 7,
-	[IRQ_DM646X_EMACRXINT]          = 7,
-	[IRQ_DM646X_EMACTXINT]          = 7,
-	[IRQ_DM646X_EMACMISCINT]        = 7,
-	[IRQ_DM646X_MCASP0TXINT]        = 7,
-	[IRQ_DM646X_MCASP0RXINT]        = 7,
-	[IRQ_AEMIFINT]                  = 7,
-	[IRQ_DM646X_RESERVED_3]         = 7,
-	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
-	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
-	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
-	[IRQ_PWMINT0]                   = 7,
-	[IRQ_PWMINT1]                   = 7,
-	[IRQ_DM646X_VLQINT]             = 7,
-	[IRQ_I2C]                       = 7,
-	[IRQ_UARTINT0]                  = 7,
-	[IRQ_UARTINT1]                  = 7,
-	[IRQ_DM646X_UARTINT2]           = 7,
-	[IRQ_DM646X_SPINT0]             = 7,
-	[IRQ_DM646X_SPINT1]             = 7,
-	[IRQ_DM646X_DSP2ARMINT]         = 7,
-	[IRQ_DM646X_RESERVED_4]         = 7,
-	[IRQ_DM646X_PSCINT]             = 7,
-	[IRQ_DM646X_GPIO0]              = 7,
-	[IRQ_DM646X_GPIO1]              = 7,
-	[IRQ_DM646X_GPIO2]              = 7,
-	[IRQ_DM646X_GPIO3]              = 7,
-	[IRQ_DM646X_GPIO4]              = 7,
-	[IRQ_DM646X_GPIO5]              = 7,
-	[IRQ_DM646X_GPIO6]              = 7,
-	[IRQ_DM646X_GPIO7]              = 7,
-	[IRQ_DM646X_GPIOBNK0]           = 7,
-	[IRQ_DM646X_GPIOBNK1]           = 7,
-	[IRQ_DM646X_GPIOBNK2]           = 7,
-	[IRQ_DM646X_DDRINT]             = 7,
-	[IRQ_DM646X_AEMIFINT]           = 7,
-	[IRQ_COMMTX]                    = 7,
-	[IRQ_COMMRX]                    = 7,
-	[IRQ_EMUINT]                    = 7,
-};
-
-static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
 	unsigned i;
-
-	if (cpu_is_davinci_dm644x())
-		davinci_def_priorities = dm644x_default_priorities;
-	else if (cpu_is_davinci_dm646x())
-		davinci_def_priorities = dm646x_default_priorities;
-	else if (cpu_is_davinci_dm355())
-		davinci_def_priorities = dm355_default_priorities;
+	const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
 
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index bbba0b247a4..d310f579aa8 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -21,18 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/mux.h>
-
-static const struct mux_config *mux_table;
-static unsigned long pin_table_sz;
-
-int __init davinci_mux_register(const struct mux_config *pins,
-				unsigned long size)
-{
-	mux_table = pins;
-	pin_table_sz = size;
-
-	return 0;
-}
+#include <mach/common.h>
 
 /*
  * Sets the DAVINCI MUX register based on the table
@@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins,
 int __init_or_module davinci_cfg_reg(const unsigned long index)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
-	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->pinmux_base;
 	unsigned long flags;
 	const struct mux_config *cfg;
 	unsigned int reg_orig = 0, reg = 0;
 	unsigned int mask, warn = 0;
 
-	if (!mux_table)
+	if (!soc_info->pinmux_pins)
 		BUG();
 
-	if (index >= pin_table_sz) {
+	if (index >= soc_info->pinmux_pins_num) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, pin_table_sz);
+		       index, soc_info->pinmux_pins_num);
 		dump_stack();
 		return -ENODEV;
 	}
 
-	cfg = &mux_table[index];
+	cfg = &soc_info->pinmux_pins[index];
 
 	if (cfg->name == NULL) {
 		printk(KERN_ERR "No entry for the specified index\n");
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 84171abf5f7..a78b657e916 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -28,8 +28,6 @@
 #include <mach/psc.h>
 #include <mach/mux.h>
 
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
 /* PSC register offsets */
 #define EPCPR		0x070
 #define PTCMD		0x120
@@ -42,22 +40,42 @@
 #define MDSTAT_STATE_MASK 0x1f
 
 /* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int id)
+int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 {
-	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
-	u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+	void __iomem *psc_base;
+	u32 mdstat;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+				(int)soc_info->psc_bases, ctlr);
+		return 0;
+	}
+
+	psc_base = soc_info->psc_bases[ctlr];
+	mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 
 	/* if clocked, state can be "Enable" or "SyncReset" */
 	return mdstat & BIT(12);
 }
 
 /* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+		unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
-	void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+	void __iomem *psc_base;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
 
+	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+				(int)soc_info->psc_bases, ctlr);
+		return;
+	}
+
+	psc_base = soc_info->psc_bases[ctlr];
+
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
 	mdctl |= next_state;
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 69507579652..c530c7333d0 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -33,6 +33,8 @@
 #include <mach/serial.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
+#include <mach/common.h>
+
 #include "clock.h"
 
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
@@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 	__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
 }
 
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= IRQ_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= IRQ_UARTINT2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags		= 0
-	},
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
 static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 {
 	unsigned int pwremu = 0;
@@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 				 UART_DM646X_SCR_TX_WATERMARK);
 }
 
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
 {
 	int i;
 	char name[16];
 	struct clk *uart_clk;
-	struct device *dev = &serial_device.dev;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct device *dev = &soc_info->serial_dev->dev;
+	struct plat_serial8250_port *p = dev->platform_data;
 
 	/*
 	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
+	 * You have to mux them off in device drivers later on if not needed.
 	 */
-	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
-
-		if (!(info->enabled_uarts & (1 << i))) {
-			p->flags = 0;
+	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+		if (!(info->enabled_uarts & (1 << i)))
 			continue;
-		}
-
-		if (cpu_is_davinci_dm646x())
-			p->iotype = UPIO_MEM32;
-
-		if (cpu_is_davinci_dm355()) {
-			if (i == 2) {
-				p->mapbase = (unsigned long)DM355_UART2_BASE;
-				p->irq = IRQ_DM355_UARTINT2;
-			}
-		}
 
 		sprintf(name, "uart%d", i);
 		uart_clk = clk_get(dev, name);
@@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info)
 			davinci_serial_reset(p);
 		}
 	}
-}
 
-static int __init davinci_init(void)
-{
-	return platform_device_register(&serial_device);
+	return platform_device_register(soc_info->serial_dev);
 }
-
-arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
new file mode 100644
index 00000000000..db54b2a66b4
--- /dev/null
+++ b/arch/arm/mach-davinci/sram.c
@@ -0,0 +1,74 @@
+/*
+ * mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+
+#include <mach/common.h>
+#include <mach/memory.h>
+#include <mach/sram.h>
+
+
+static struct gen_pool *sram_pool;
+
+void *sram_alloc(size_t len, dma_addr_t *dma)
+{
+	unsigned long vaddr;
+	dma_addr_t dma_base = davinci_soc_info.sram_dma;
+
+	if (dma)
+		*dma = 0;
+	if (!sram_pool || (dma && !dma_base))
+		return NULL;
+
+	vaddr = gen_pool_alloc(sram_pool, len);
+	if (!vaddr)
+		return NULL;
+
+	if (dma)
+		*dma = dma_base + (vaddr - SRAM_VIRT);
+	return (void *)vaddr;
+
+}
+EXPORT_SYMBOL(sram_alloc);
+
+void sram_free(void *addr, size_t len)
+{
+	gen_pool_free(sram_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(sram_free);
+
+
+/*
+ * REVISIT This supports CPU and DMA access to/from SRAM, but it
+ * doesn't (yet?) support some other notable uses of SRAM:  as TCM
+ * for data and/or instructions; and holding code needed to enter
+ * and exit suspend states (while DRAM can't be used).
+ */
+static int __init sram_init(void)
+{
+	unsigned len = davinci_soc_info.sram_len;
+	int status = 0;
+
+	if (len) {
+		len = min(len, SRAM_SIZE);
+		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
+		if (!sram_pool)
+			status = -ENOMEM;
+	}
+	if (sram_pool)
+		status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+	WARN_ON(status < 0);
+	return status;
+}
+core_initcall(sram_init);
+
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 494e01bff5c..0884ca57bfb 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -28,52 +29,41 @@
 #include <asm/errno.h>
 #include <mach/io.h>
 #include <mach/cputype.h>
+#include <mach/time.h>
 #include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
 static unsigned int davinci_clock_tick_rate;
 
-#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE   (IO_PHYS + 0x21C00)
-
-enum {
-	T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
-};
-
-#define IS_TIMER1(id)    (id & 0x2)
-#define IS_TIMER0(id)    (!IS_TIMER1(id))
-#define IS_TIMER_TOP(id) ((id & 0x1))
-#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
-
-static int timer_irqs[NUM_TIMERS] = {
-	IRQ_TINT0_TINT12,
-	IRQ_TINT0_TINT34,
-	IRQ_TINT1_TINT12,
-	IRQ_TINT1_TINT34,
-};
-
 /*
  * This driver configures the 2 64-bit count-up timers as 4 independent
  * 32-bit count-up timers used as follows:
- *
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
  */
-#define TID_CLOCKEVENT  T0_BOT
-#define TID_CLOCKSOURCE T0_TOP
+
+enum {
+	TID_CLOCKEVENT,
+	TID_CLOCKSOURCE,
+};
 
 /* Timer register offsets */
-#define PID12                        0x0
-#define TIM12                        0x10
-#define TIM34                        0x14
-#define PRD12                        0x18
-#define PRD34                        0x1c
-#define TCR                          0x20
-#define TGCR                         0x24
-#define WDTCR                        0x28
+#define PID12			0x0
+#define TIM12			0x10
+#define TIM34			0x14
+#define PRD12			0x18
+#define PRD34			0x1c
+#define TCR			0x20
+#define TGCR			0x24
+#define WDTCR			0x28
+
+/* Offsets of the 8 compare registers */
+#define	CMP12_0			0x60
+#define	CMP12_1			0x64
+#define	CMP12_2			0x68
+#define	CMP12_3			0x6c
+#define	CMP12_4			0x70
+#define	CMP12_5			0x74
+#define	CMP12_6			0x78
+#define	CMP12_7			0x7c
 
 /* Timer register bitfields */
 #define TCR_ENAMODE_DISABLE          0x0
@@ -105,6 +95,7 @@ struct timer_s {
 	unsigned int id;
 	unsigned long period;
 	unsigned long opts;
+	unsigned long flags;
 	void __iomem *base;
 	unsigned long tim_off;
 	unsigned long prd_off;
@@ -114,30 +105,58 @@ struct timer_s {
 static struct timer_s timers[];
 
 /* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED   0x00
-#define TIMER_OPTS_ONESHOT    0x01
-#define TIMER_OPTS_PERIODIC   0x02
+#define TIMER_OPTS_DISABLED		0x01
+#define TIMER_OPTS_ONESHOT		0x02
+#define TIMER_OPTS_PERIODIC		0x04
+#define TIMER_OPTS_STATE_MASK		0x07
+
+#define TIMER_OPTS_USE_COMPARE		0x80000000
+#define USING_COMPARE(t)		((t)->opts & TIMER_OPTS_USE_COMPARE)
+
+static char *id_to_name[] = {
+	[T0_BOT]	= "timer0_0",
+	[T0_TOP]	= "timer0_1",
+	[T1_BOT]	= "timer1_0",
+	[T1_TOP]	= "timer1_1",
+};
 
 static int timer32_config(struct timer_s *t)
 {
-	u32 tcr = __raw_readl(t->base + TCR);
-
-	/* disable timer */
-	tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-	__raw_writel(tcr, t->base + TCR);
-
-	/* reset counter to zero, set new period */
-	__raw_writel(0, t->base + t->tim_off);
-	__raw_writel(t->period, t->base + t->prd_off);
-
-	/* Set enable mode */
-	if (t->opts & TIMER_OPTS_ONESHOT) {
-		tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
-	} else if (t->opts & TIMER_OPTS_PERIODIC) {
-		tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+	u32 tcr;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (USING_COMPARE(t)) {
+		struct davinci_timer_instance *dtip =
+				soc_info->timer_info->timers;
+		int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
+
+		/*
+		 * Next interrupt should be the current time reg value plus
+		 * the new period (using 32-bit unsigned addition/wrapping
+		 * to 0 on overflow).  This assumes that the clocksource
+		 * is setup to count to 2^32-1 before wrapping around to 0.
+		 */
+		__raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
+			t->base + dtip[event_timer].cmp_off);
+	} else {
+		tcr = __raw_readl(t->base + TCR);
+
+		/* disable timer */
+		tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+		__raw_writel(tcr, t->base + TCR);
+
+		/* reset counter to zero, set new period */
+		__raw_writel(0, t->base + t->tim_off);
+		__raw_writel(t->period, t->base + t->prd_off);
+
+		/* Set enable mode */
+		if (t->opts & TIMER_OPTS_ONESHOT)
+			tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+		else if (t->opts & TIMER_OPTS_PERIODIC)
+			tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+
+		__raw_writel(tcr, t->base + TCR);
 	}
-
-	__raw_writel(tcr, t->base + TCR);
 	return 0;
 }
 
@@ -182,13 +201,14 @@ static struct timer_s timers[] = {
 
 static void __init timer_init(void)
 {
-	u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
 	int i;
 
 	/* Global init of each 64-bit timer as a whole */
 	for(i=0; i<2; i++) {
 		u32 tgcr;
-		void __iomem *base = IO_ADDRESS(phys_bases[i]);
+		void __iomem *base = dtip[i].base;
 
 		/* Disabled, Internal clock source */
 		__raw_writel(0, base + TCR);
@@ -214,33 +234,33 @@ static void __init timer_init(void)
 	/* Init of each timer as a 32-bit timer */
 	for (i=0; i< ARRAY_SIZE(timers); i++) {
 		struct timer_s *t = &timers[i];
-		u32 phys_base;
-
-		if (t->name) {
-			t->id = i;
-			phys_base = (IS_TIMER1(t->id) ?
-			       DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
-			t->base = IO_ADDRESS(phys_base);
-
-			if (IS_TIMER_BOT(t->id)) {
-				t->enamode_shift = 6;
-				t->tim_off = TIM12;
-				t->prd_off = PRD12;
-			} else {
-				t->enamode_shift = 22;
-				t->tim_off = TIM34;
-				t->prd_off = PRD34;
-			}
-
-			/* Register interrupt */
-			t->irqaction.name = t->name;
-			t->irqaction.dev_id = (void *)t;
-			if (t->irqaction.handler != NULL) {
-				setup_irq(timer_irqs[t->id], &t->irqaction);
-			}
-
-			timer32_config(&timers[i]);
+		int timer = ID_TO_TIMER(t->id);
+		u32 irq;
+
+		t->base = dtip[timer].base;
+
+		if (IS_TIMER_BOT(t->id)) {
+			t->enamode_shift = 6;
+			t->tim_off = TIM12;
+			t->prd_off = PRD12;
+			irq = dtip[timer].bottom_irq;
+		} else {
+			t->enamode_shift = 22;
+			t->tim_off = TIM34;
+			t->prd_off = PRD34;
+			irq = dtip[timer].top_irq;
+		}
+
+		/* Register interrupt */
+		t->irqaction.name = t->name;
+		t->irqaction.dev_id = (void *)t;
+
+		if (t->irqaction.handler != NULL) {
+			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
+			setup_irq(irq, &t->irqaction);
 		}
+
+		timer32_config(&timers[i]);
 	}
 }
 
@@ -255,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs)
 }
 
 static struct clocksource clocksource_davinci = {
-	.name		= "timer0_1",
 	.rating		= 300,
 	.read		= read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -284,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode,
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		t->period = davinci_clock_tick_rate / (HZ);
-		t->opts = TIMER_OPTS_PERIODIC;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_PERIODIC;
 		timer32_config(t);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		t->opts = TIMER_OPTS_ONESHOT;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_ONESHOT;
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		t->opts = TIMER_OPTS_DISABLED;
+		t->opts &= ~TIMER_OPTS_STATE_MASK;
+		t->opts |= TIMER_OPTS_DISABLED;
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
@@ -300,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
 }
 
 static struct clock_event_device clockevent_davinci = {
-	.name		= "timer0_0",
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_next_event	= davinci_set_next_event,
@@ -311,10 +332,42 @@ static struct clock_event_device clockevent_davinci = {
 static void __init davinci_timer_init(void)
 {
 	struct clk *timer_clk;
-
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	unsigned int clockevent_id;
+	unsigned int clocksource_id;
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
 
+	clockevent_id = soc_info->timer_info->clockevent_id;
+	clocksource_id = soc_info->timer_info->clocksource_id;
+
+	timers[TID_CLOCKEVENT].id = clockevent_id;
+	timers[TID_CLOCKSOURCE].id = clocksource_id;
+
+	/*
+	 * If using same timer for both clock events & clocksource,
+	 * a compare register must be used to generate an event interrupt.
+	 * This is equivalent to a oneshot timer only (not periodic).
+	 */
+	if (clockevent_id == clocksource_id) {
+		struct davinci_timer_instance *dtip =
+				soc_info->timer_info->timers;
+		int event_timer = ID_TO_TIMER(clockevent_id);
+
+		/* Only bottom timers can use compare regs */
+		if (IS_TIMER_TOP(clockevent_id))
+			pr_warning("davinci_timer_init: Invalid use"
+				" of system timers.  Results unpredictable.\n");
+		else if ((dtip[event_timer].cmp_off == 0)
+				|| (dtip[event_timer].cmp_irq == 0))
+			pr_warning("davinci_timer_init:  Invalid timer instance"
+				" setup.  Results unpredictable.\n");
+		else {
+			timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
+			clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
+		}
+	}
+
 	/* init timer hw */
 	timer_init();
 
@@ -325,6 +378,7 @@ static void __init davinci_timer_init(void)
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
+	clocksource_davinci.name = id_to_name[clocksource_id];
 	clocksource_davinci.mult =
 		clocksource_khz2mult(davinci_clock_tick_rate/1000,
 				     clocksource_davinci.shift);
@@ -332,12 +386,12 @@ static void __init davinci_timer_init(void)
 		printk(err, clocksource_davinci.name);
 
 	/* setup clockevent */
+	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
 	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
 					 clockevent_davinci.shift);
 	clockevent_davinci.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-	clockevent_davinci.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_davinci);
+	clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
 
 	clockevent_davinci.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_davinci);
@@ -349,15 +403,14 @@ struct sys_timer davinci_timer = {
 
 
 /* reset board using watchdog timer */
-void davinci_watchdog_reset(void) {
+void davinci_watchdog_reset(void)
+{
 	u32 tgcr, wdtcr;
-	void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
-	struct device dev;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->wdt_base;
 	struct clk *wd_clk;
-	char *name = "watchdog";
 
-	dev_set_name(&dev, name);
-	wd_clk = clk_get(&dev, NULL);
+	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
 	clk_enable(wd_clk);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 56bddcef690..d7291c682a6 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,87 +9,135 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+choice
+	prompt "EP93xx first SDRAM bank selection"
+	default EP93XX_SDCE3_SYNC_PHYS_OFFSET
+
+config EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "0x00000000 - SDCE3/SyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0x00000000
+
+config EP93XX_SDCE0_PHYS_OFFSET
+	bool "0xc0000000 - SDCEO"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xc0000000
+
+endchoice
+
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
 
+config MACH_EDB93XX
+	bool
+
+config MACH_EDB9301
+	bool "Support Cirrus Logic EDB9301"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9301 Evaluation Board.
+
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302 Evaluation Board.
 
 config MACH_EDB9302A
 	bool "Support Cirrus Logic EDB9302A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9302A Evaluation Board.
 
 config MACH_EDB9307
 	bool "Support Cirrus Logic EDB9307"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307 Evaluation Board.
 
 config MACH_EDB9307A
 	bool "Support Cirrus Logic EDB9307A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307A Evaluation Board.
 
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9312 Evaluation Board.
 
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315 Evaluation Board.
 
 config MACH_EDB9315A
 	bool "Support Cirrus Logic EDB9315A"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
 config MACH_GESBC9312
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "Support Glomation GESBC-9312-sx"
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
 
 config MACH_MICRO9
-        bool
-        default n
+	bool
 
 config MACH_MICRO9H
-       bool "Support Contec Hypercontrol Micro9-H"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-H board.
+	bool "Support Contec Hypercontrol Micro9-H"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-H board.
 
 config MACH_MICRO9M
-       bool "Support Contec Hypercontrol Micro9-M"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-M board.
+	bool "Support Contec Hypercontrol Micro9-M"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-M board.
 
 config MACH_MICRO9L
-       bool "Support Contec Hypercontrol Micro9-L"
-       select MACH_MICRO9
-       help
-         Say 'Y' here if you want your kernel to support the
-         Contec Hypercontrol Micro9-L board.
+	bool "Support Contec Hypercontrol Micro9-L"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Hypercontrol Micro9-L board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
+	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 9522e205b73..eae6199a989 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -7,13 +7,7 @@ obj-n			:=
 obj-			:=
 
 obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
-obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
-obj-$(CONFIG_MACH_EDB9302A)	+= edb9302a.o
-obj-$(CONFIG_MACH_EDB9307)	+= edb9307.o
-obj-$(CONFIG_MACH_EDB9307A)	+= edb9307a.o
-obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
-obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
-obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
+obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
 obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index d5561ad15ba..27a085a8f12 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -1,2 +1,5 @@
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
+   zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00008000
+params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
+params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index b2eede5531c..6c4c1633ed1 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -72,58 +72,58 @@ static struct clk clk_h;
 static struct clk clk_p;
 static struct clk clk_pll2;
 static struct clk clk_usb_host = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= EP93XX_SYSCON_CLOCK_USH_EN,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00020000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00010000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00080000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00040000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00200000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00100000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00800000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x00400000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x02000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x01000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x04000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
-	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
-	.enable_mask	= 0x08000000,
+	.enable_reg	= EP93XX_SYSCON_PWRCNT,
+	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
 
 #define INIT_CK(dev,con,ck)					\
@@ -138,7 +138,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL, "hclk", &clk_h),
 	INIT_CK(NULL, "pclk", &clk_p),
 	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK(NULL, "usb_host", &clk_usb_host),
+	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
 	INIT_CK(NULL, "m2p0", &clk_m2p0),
 	INIT_CK(NULL, "m2p1", &clk_m2p1),
 	INIT_CK(NULL, "m2p2", &clk_m2p2),
@@ -186,8 +186,8 @@ static unsigned long get_uart_rate(struct clk *clk)
 {
 	u32 value;
 
-	value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
-	if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
 		return EP93XX_EXT_CLK_RATE;
 	else
 		return EP93XX_EXT_CLK_RATE / 2;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486f858..204dc5cbd0b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3];
 static unsigned char gpio_int_enabled[3];
 static unsigned char gpio_int_type1[3];
 static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debouce[3];
+static unsigned char gpio_int_debounce[3];
 
 /* Port ordering is: A B F */
 static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
@@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
 	int port_mask = 1 << (line & 7);
 
 	if (enable)
-		gpio_int_debouce[port] |= port_mask;
+		gpio_int_debounce[port] |= port_mask;
 	else
-		gpio_int_debouce[port] &= ~port_mask;
+		gpio_int_debounce[port] &= ~port_mask;
 
-	__raw_writeb(gpio_int_debouce[port],
+	__raw_writeb(gpio_int_debounce[port],
 		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
 }
 EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -450,10 +450,19 @@ static struct amba_device uart3_device = {
 };
 
 
+static struct resource ep93xx_rtc_resource[] = {
+	{
+		.start		= EP93XX_RTC_PHYS_BASE,
+		.end		= EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
 static struct platform_device ep93xx_rtc_device = {
-       .name           = "ep93xx-rtc",
-       .id             = -1,
-       .num_resources  = 0,
+	.name		= "ep93xx-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_rtc_resource),
+	.resource	= ep93xx_rtc_resource,
 };
 
 
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
deleted file mode 100644
index 8bf8d7c78f1..00000000000
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302.c
- * Cirrus Logic EDB9302 support.
- *
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9302_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9302_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9302_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9302_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9302_flash);
-
-	ep93xx_register_eth(&edb9302_eth_data, 1);
-}
-
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
-	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9302_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
deleted file mode 100644
index a352c57c7b4..00000000000
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302a.c
- * Cirrus Logic EDB9302A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9302a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9302a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9302a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302a_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9302a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9302a_flash);
-
-	ep93xx_register_eth(&edb9302a_eth_data, 1);
-}
-
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9302a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
deleted file mode 100644
index 5ab22f63a4e..00000000000
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307.c
- * Cirrus Logic EDB9307 support.
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9307_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9307_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9307_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9307_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9307_flash);
-
-	ep93xx_register_eth(&edb9307_eth_data, 1);
-}
-
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9307_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
deleted file mode 100644
index 6171167d331..00000000000
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307a.c
- * Cirrus Logic EDB9307A support.
- *
- * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9307a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9307a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9307a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307a_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
-	{
-		/* On-board battery backed RTC */
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-	/*
-	 * The I2C signals are also routed to the Expansion Connector (J4)
-	 */
-};
-
-static void __init edb9307a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9307a_flash);
-
-	ep93xx_register_eth(&edb9307a_eth_data, 1);
-
-	ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
-}
-
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9307a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
deleted file mode 100644
index d7179f66d80..00000000000
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9312.c
- * Cirrus Logic EDB9312 support.
- *
- * Copyright (C) 2006 Infosys Technologies Limited
- * 	Toufeeq Hussain	<toufeeq_hussain@infosys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9312_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9312_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9312_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9312_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9312_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9312_flash);
-
-	ep93xx_register_eth(&edb9312_eth_data, 1);
-}
-
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
-	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9312_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
deleted file mode 100644
index 025af6eaca1..00000000000
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315.c
- * Cirrus Logic EDB9315 support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315_flash_data = {
-	.width		= 4,
-};
-
-static struct resource edb9315_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9315_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9315_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9315_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9315_flash);
-
-	ep93xx_register_eth(&edb9315_eth_data, 1);
-}
-
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9315_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
deleted file mode 100644
index 4c9cc8a39f5..00000000000
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315a.c
- * Cirrus Logic EDB9315A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315a_flash_data = {
-	.width		= 2,
-};
-
-static struct resource edb9315a_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315a_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb9315a_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb9315a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315a_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init edb9315a_init_machine(void)
-{
-	ep93xx_init_devices();
-	platform_device_register(&edb9315a_flash);
-
-	ep93xx_register_eth(&edb9315a_eth_data, 1);
-}
-
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb9315a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
new file mode 100644
index 00000000000..e9e45b92457
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb93xx_flash_data;
+
+static struct resource edb93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb93xx_flash_resource,
+};
+
+static void __init __edb93xx_register_flash(unsigned int width,
+			resource_size_t start, resource_size_t size)
+{
+	edb93xx_flash_data.width	= width;
+	edb93xx_flash_resource.start	= start;
+	edb93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&edb93xx_flash);
+}
+
+static void __init edb93xx_register_flash(void)
+{
+	if (machine_is_edb9307() || machine_is_edb9312() ||
+	    machine_is_edb9315()) {
+		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+	} else {
+		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+	}
+}
+
+static struct ep93xx_eth_data edb93xx_eth_data = {
+	.phy_id		= 1,
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+	if (machine_is_edb9302a() || machine_is_edb9307a() ||
+	    machine_is_edb9315a()) {
+		ep93xx_register_i2c(edb93xxa_i2c_data,
+				ARRAY_SIZE(edb93xxa_i2c_data));
+	} else if (machine_is_edb9307() || machine_is_edb9312() ||
+		   machine_is_edb9315()) {
+		ep93xx_register_i2c(edb93xx_i2c_data,
+				ARRAY_SIZE(edb93xx_i2c_data));
+	}
+}
+
+static void __init edb93xx_init_machine(void)
+{
+	ep93xx_init_devices();
+	edb93xx_register_flash();
+	ep93xx_register_eth(&edb93xx_eth_data, 1);
+	edb93xx_register_i2c();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+	/* Maintainer: George Kashperko <george@chas.com.ua> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb93xx_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 1732de7629a..967c079180d 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,13 +147,27 @@
 #define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
 
 #define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
 
 #define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
+#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN	(1<<28)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	(1<<27)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	(1<<26)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	(1<<25)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	(1<<24)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	(1<<23)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	(1<<22)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	(1<<21)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	(1<<20)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	(1<<19)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	(1<<18)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	(1<<17)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
 #define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 5c80c3c8158..925b12ea099 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -5,6 +5,12 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
+#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0x00000000)
+#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xc0000000)
+#else
+#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
+#endif
 
 #endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index cddd194ac6e..00000000000
--- a/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menu "IMX Implementations"
-	depends on ARCH_IMX
-
-config ARCH_MX1ADS
-	bool "mx1ads"
-	depends on ARCH_IMX
-	select ISA
-	help
-	  Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
deleted file mode 100644
index b047c7e795a..00000000000
--- a/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			+= irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX)	+= cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS)	+=  $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index fd72ce5b808..00000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-    zreladdr-$(CONFIG_ARCH_MX1ADS)	:= 0x08008000
-
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
deleted file mode 100644
index cf332aeb942..00000000000
--- a/arch/arm/mach-imx/clock.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
-	struct list_head node;
-	const char *name;
-	unsigned long (*get_rate)(void);
-};
-
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref *
-		((mfi << 16) + (mfn << 16) / (mfd + 1));
-	quot = (pd + 1) * (1 << 16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
-	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
-	return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
-	return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
-	return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
-	return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
-	return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
-	return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
-	.name = "system_clk",
-	.get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
-	.name = "hclk",
-	.get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
-	.name = "mcu_clk",
-	.get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
-	.name = "perclk1",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
-	.name = "uart_clk",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
-	.name = "perclk2",
-	.get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
-	.name = "perclk3",
-	.get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
-	&clk_perclk1,
-	&clk_perclk2,
-	&clk_perclk3,
-	&clk_system_clk,
-	&clk_hclk,
-	&clk_mcu_clk,
-	&clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (!strcmp(p->name, id)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
-	int i;
-
-	mutex_lock(&clocks_mutex);
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		list_add(&clks[i]->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index 434b4ca0af6..00000000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE	0xC0000000
-#define CR_920T_FASTBUS_MODE	0x00000000
-#define CR_920T_ASYNC_MODE	0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
-	unsigned long flags;
-
-	if (mpctl0 == 0) {
-		local_irq_save(flags);
-		CSCR &= ~CSCR_MPEN;
-		local_irq_restore(flags);
-		return;
-	}
-
-	local_irq_save(flags);
-	MPCTL0 = mpctl0;
-	CSCR |= CSCR_MPEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl:	pointer to location assigned by new PLL control register value
- * @cur_mpctl:	current PLL control register parameters
- * @f_ref:	reference source frequency Hz
- * @freq:	required frequency in Hz
- * @relation:	is one of %CPUFREQ_RELATION_L (supremum)
- *		and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
-        u32 mfi;
-        u32 mfn;
-        u32 mfd;
-        u32 pd;
-	unsigned long long ll;
-	long l;
-	long quot;
-
-	/* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
-	/*  PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
-	if (cur_mpctl) {
-		mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
-		pd =  ((cur_mpctl >> 26) & 0xf) + 1;
-	} else {
-		pd=2; mfd=313;
-	}
-
-	/* pd=2; mfd=313; mfi=8; mfn=183; */
-	/* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
-	quot = (f_ref + (1 << 9)) >> 10;
-	l = (freq * pd + quot) / (2 * quot);
-	mfi = l >> 10;
-	mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
-	mfd -= 1;
-	pd -= 1;
-
-	*new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
-		| ((pd & 0xf) << 26);
-
-	ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
-	quot = (pd+1) * (1<<16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	freq = ll;
-
-	pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
-		pd, mfd, mfi, mfn, freq);
-
-	return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
-	unsigned int freq;
-	unsigned int cr;
-	unsigned int cscr;
-	unsigned int bclk_div;
-
-	if (cpu)
-		return 0;
-
-	cscr = CSCR;
-	bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
-	cr = get_cr();
-
-	if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
-		freq = clk_get_rate(system_clk);
-		freq = (freq + bclk_div/2) / bclk_div;
-	} else {
-		freq = clk_get_rate(mcu_clk);
-		if (cscr & CSCR_MPU_PRESC)
-			freq /= 2;
-	}
-
-	freq = (freq + 500) / 1000;
-
-	return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	u32 mpctl0 = 0;
-	u32 cscr;
-	unsigned long flags;
-	long freq;
-	long sysclk;
-	unsigned int bclk_div = bclk_div_at_boot;
-
-	/*
-	 * Some governors do not respects CPU and policy lower limits
-	 * which leads to bad things (division by zero etc), ensure
-	 * that such things do not happen.
-	 */
-	if(target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-
-	if(target_freq < policy->min)
-		target_freq = policy->min;
-
-	freq = target_freq * 1000;
-
-	pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
-			freq, mpctl0_at_boot);
-
-	sysclk = clk_get_rate(system_clk);
-
-	if (freq > sysclk / bclk_div_at_boot + 1000000) {
-		freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
-		if (freq < 0) {
-			printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
-			return -EINVAL;
-		}
-	} else {
-		if(freq + 1000 < sysclk) {
-			if (relation == CPUFREQ_RELATION_L)
-				bclk_div = (sysclk - 1000) / freq;
-			else
-				bclk_div = (sysclk + freq + 1000) / freq;
-
-			if(bclk_div > 16)
-				bclk_div = 16;
-			if(bclk_div < bclk_div_at_boot)
-				bclk_div = bclk_div_at_boot;
-		}
-		freq = (sysclk + bclk_div / 2) / bclk_div;
-	}
-
-	freqs.old = imx_get_speed(0);
-	freqs.new = (freq + 500) / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_save(flags);
-
-	imx_set_fastbus_mode();
-
-	imx_set_mpctl0(mpctl0);
-
-	cscr = CSCR;
-	cscr &= ~CSCR_BCLK_DIV;
-	cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
-	CSCR = cscr;
-
-	if(mpctl0) {
-		CSCR |= CSCR_MPLL_RESTART;
-
-		/* Wait until MPLL is stabilized */
-		while( CSCR & CSCR_MPLL_RESTART );
-
-		imx_set_async_mode();
-	}
-
-	local_irq_restore(flags);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
-			freq, mpctl0? "MPLL": "SPLL");
-
-	return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	policy->cur = policy->min = policy->max = imx_get_speed(0);
-	policy->cpuinfo.min_freq = 8000;
-	policy->cpuinfo.max_freq = 200000;
-	 /* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
-	return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= imx_verify_speed,
-	.target		= imx_set_target,
-	.get		= imx_get_speed,
-	.init		= imx_cpufreq_driver_init,
-	.name		= "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
-	bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
-	mpctl0_at_boot = 0;
-
-	system_clk = clk_get(NULL, "system_clk");
-	if (IS_ERR(system_clk))
-		return PTR_ERR(system_clk);
-
-	mcu_clk = clk_get(NULL, "mcu_clk");
-	if (IS_ERR(mcu_clk)) {
-		clk_put(system_clk);
-		return PTR_ERR(mcu_clk);
-	}
-
-	if((CSCR & CSCR_MPEN) &&
-	   ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
-		mpctl0_at_boot = MPCTL0;
-
-	return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
deleted file mode 100644
index 1536583eece..00000000000
--- a/arch/arm/mach-imx/dma.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/dma.c
- *
- *  imx DMA registration and IRQ dispatching
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- *             initial version heavily inspired by
- *             linux/arch/arm/mach-pxa/dma.c
- *
- *  2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Changed to support scatter gather DMA
- *             by taking Russell's code from RiscPC
- *
- *  2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned int nextcount;
-	unsigned int nextaddr;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return 0;
-	}
-
-	imxdma->resbytes -= lastcount;
-
-	if (!imxdma->sg) {
-		pr_debug("imxdma%d: no sg data\n", dma_ch);
-		return 0;
-	}
-
-	imxdma->sgbc += lastcount;
-	if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
-		if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
-			pr_debug("imxdma%d: sg transfer limit reached\n",
-				 dma_ch);
-			imxdma->sgcount=0;
-			imxdma->sg = NULL;
-			return 0;
-		} else {
-			imxdma->sgcount--;
-			imxdma->sg++;
-			imxdma->sgbc = 0;
-		}
-	}
-	nextcount = imxdma->sg->length - imxdma->sgbc;
-	nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
-	if(imxdma->resbytes < nextcount)
-		nextcount = imxdma->resbytes;
-
-	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		DAR(dma_ch) = nextaddr;
-	else
-		SAR(dma_ch) = nextaddr;
-
-	CNTR(dma_ch) = nextcount;
-	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
-		 dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
-	return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
-		      struct scatterlist *sg, unsigned int sgcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = sg;
-	imxdma->sgcount = sgcount;
-	imxdma->sgbc = 0;
-	return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- *		to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- *		Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		     unsigned int dma_length, unsigned int dev_addr,
-		     unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!dma_address) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!dma_length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = dev_addr;
-		DAR(dma_ch) = (unsigned int)dma_address;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = (unsigned int)dma_address;
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	CNTR(dma_ch) = dma_length;
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode)
-{
-	int res;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!sg->length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		SAR(dma_ch) = dev_addr;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
-	if (res <= 0) {
-		printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- *		ends successfully
- * @err_handler: the pointer to the function called if the premature
- *		end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		       void (*irq_handler) (int, void *),
-		       void (*err_handler) (int, void *, int),
-		       void *data)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	imxdma->irq_handler = irq_handler;
-	imxdma->err_handler = err_handler;
-	imxdma->data = data;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	DIMR &= ~(1 << dma_ch);
-	CCR(dma_ch) |= CCR_CEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
-	local_irq_save(flags);
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	DISR = (1 << dma_ch);
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	if (dma_ch >= IMX_DMA_CHANNELS) {
-		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __func__, dma_ch);
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (imxdma->name) {
-		local_irq_restore(flags);
-		return -ENODEV;
-	}
-
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	/* Disable interrupts */
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	imxdma->name = NULL;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- *        %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
-	int i;
-	int best;
-
-	switch (prio) {
-	case (DMA_PRIO_HIGH):
-		best = 8;
-		break;
-	case (DMA_PRIO_MEDIUM):
-		best = 4;
-		break;
-	case (DMA_PRIO_LOW):
-	default:
-		best = 0;
-		break;
-	}
-
-	for (i = best; i < IMX_DMA_CHANNELS; i++) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	for (i = best - 1; i >= 0; i--) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
-	return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-	struct imx_dma_channel *channel;
-	unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
-	int errcode;
-
-	DISR = disr & err_mask;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if(!(err_mask & (1 << i)))
-			continue;
-		channel = &imx_dma_channels[i];
-		errcode = 0;
-
-		if (DBTOSR & (1 << i)) {
-			DBTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BURST;
-		}
-		if (DRTOSR & (1 << i)) {
-			DRTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_REQUEST;
-		}
-		if (DSESR & (1 << i)) {
-			DSESR = (1 << i);
-			errcode |= IMX_DMA_ERR_TRANSFER;
-		}
-		if (DBOSR & (1 << i)) {
-			DBOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BUFFER;
-		}
-
-		/*
-		 * The cleaning of @sg field would be questionable
-		 * there, because its value can help to compute
-		 * remaining/transferred bytes count in the handler
-		 */
-		/*imx_dma_channels[i].sg = NULL;*/
-
-		if (channel->name && channel->err_handler) {
-			channel->err_handler(i, channel->data, errcode);
-			continue;
-		}
-
-		imx_dma_channels[i].sg = NULL;
-
-		printk(KERN_WARNING
-		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
-		       i, channel->name,
-		       errcode&IMX_DMA_ERR_BURST?    " burst":"",
-		       errcode&IMX_DMA_ERR_REQUEST?  " request":"",
-		       errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
-		       errcode&IMX_DMA_ERR_BUFFER?   " buffer":"");
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-
-	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
-		     disr);
-
-	DISR = disr;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (disr & (1 << i)) {
-			struct imx_dma_channel *channel = &imx_dma_channels[i];
-			if (channel->name) {
-				if (imx_dma_sg_next(i, CNTR(i))) {
-					CCR(i) &= ~CCR_CEN;
-					mb();
-					CCR(i) |= CCR_CEN;
-				} else {
-					if (channel->irq_handler)
-						channel->irq_handler(i,
-							channel->data);
-				}
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
-	int ret;
-	int i;
-
-	/* reset DMA module */
-	DCR = DCR_DRST;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		return ret;
-	}
-
-	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-		free_irq(DMA_INT, NULL);
-	}
-
-	/* enable DMA module */
-	DCR = DCR_DEN;
-
-	/* clear all interrupts */
-	DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	/* enable interrupts */
-	DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		imx_dma_channels[i].sg = NULL;
-		imx_dma_channels[i].dma_num = i;
-	}
-
-	return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
deleted file mode 100644
index 05f1739ee12..00000000000
--- a/arch/arm/mach-imx/generic.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if(gpio_mode & GPIO_PUEN)
-		PUEN(port) |= (1<<pin);
-	else
-		PUEN(port) &= ~(1<<pin);
-
-	/* Data direction */
-	if(gpio_mode & GPIO_OUT)
-		DDIR(port) |= 1<<pin;
-	else
-		DDIR(port) &= ~(1<<pin);
-
-	/* Primary / alternate function */
-	if(gpio_mode & GPIO_AF)
-		GPR(port) |= (1<<pin);
-	else
-		GPR(port) &= ~(1<<pin);
-
-	/* use as gpio? */
-	if(gpio_mode &  GPIO_GIUS)
-		GIUS(port) |= (1<<pin);
-	else
-		GIUS(port) &= ~(1<<pin);
-
-	/* Output / input configuration */
-	/* FIXME: I'm not very sure about OCR and ICONF, someone
-	 * should have a look over it
-	 */
-	if(pin<16) {
-		tmp = OCR1(port);
-		tmp &= ~( 3<<(pin*2));
-		tmp |= (ocr << (pin*2));
-		OCR1(port) = tmp;
-
-		ICONFA1(port) &= ~( 3<<(pin*2));
-		ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		ICONFB1(port) &= ~( 3<<(pin*2));
-		ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-	} else {
-		tmp = OCR2(port);
-		tmp &= ~( 3<<((pin-16)*2));
-		tmp |= (ocr << ((pin-16)*2));
-		OCR2(port) = tmp;
-
-		ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
-		ICONFB2(port) &= ~( 3<<((pin-16)*2));
-		ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
-	}
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
-		printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
-			gpio, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
-		printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
-			gpio, label ? label : "?");
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32)
-		return;
-
-	clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
-	imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-	imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-				int alloc_mode, const char *label)
-{
-	const int *p = pin_list;
-	int i;
-	unsigned gpio;
-	unsigned mode;
-
-	for (i = 0; i < count; i++) {
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-			goto setup_error;
-
-		if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
-			imx_gpio_free(gpio);
-		else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
-			if (imx_gpio_request(gpio, label))
-				if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-					goto setup_error;
-
-		if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
-				    IMX_GPIO_ALLOC_MODE_RELEASE)))
-			imx_gpio_mode(gpio | mode);
-
-		p++;
-	}
-	return 0;
-
-setup_error:
-	if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
-		         IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-		return -EINVAL;
-
-	while (p != pin_list) {
-		p--;
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		imx_gpio_free(gpio);
-	}
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
-	return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIOA(0))
-		return -EINVAL;
-	return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
-	[0] = {
-		.start	= 0x00214000,
-		.end	= 0x002140FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (SDHC_INT),
-		.end	= (SDHC_INT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
-	.name		= "imx-mmc",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &imxmmmc_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(imx_mmc_resources),
-	.resource	= imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
-	imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
-	&imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
-	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init
-imx_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h
deleted file mode 100644
index e91003e4bef..00000000000
--- a/arch/arm/mach-imx/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/generic.h
- *
- * Author:	Sascha Hauer <sascha@saschahauer.de>
- * Copyright:	Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
deleted file mode 100644
index 87802bbfe63..00000000000
--- a/arch/arm/mach-imx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00000000	@ physical
-		movne	\rx, #0xe0000000	@ virtual
-		orreq	\rx, \rx, #0x00200000	@ physical
-		orr	\rx, \rx, #0x00006000	@ UART1 offset
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
deleted file mode 100644
index 621ff2c730f..00000000000
--- a/arch/arm/mach-imx/include/mach/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T        2
-#define DMA_REQ_UART3_R        3
-#define DMA_REQ_SSI2_T         4
-#define DMA_REQ_SSI2_R         5
-#define DMA_REQ_CSI_STAT       6
-#define DMA_REQ_CSI_R          7
-#define DMA_REQ_MSHC           8
-#define DMA_REQ_DSPA_DCT_DOUT  9
-#define DMA_REQ_DSPA_DCT_DIN  10
-#define DMA_REQ_DSPA_MAC      11
-#define DMA_REQ_EXT           12
-#define DMA_REQ_SDHC          13
-#define DMA_REQ_SPI1_R        14
-#define DMA_REQ_SPI1_T        15
-#define DMA_REQ_SSI_T         16
-#define DMA_REQ_SSI_R         17
-#define DMA_REQ_ASP_DAC       18
-#define DMA_REQ_ASP_ADC       19
-#define DMA_REQ_USP_EP(x)    (20+(x))
-#define DMA_REQ_SPI2_R        26
-#define DMA_REQ_SPI2_T        27
-#define DMA_REQ_UART2_T       28
-#define DMA_REQ_UART2_R       29
-#define DMA_REQ_UART1_T       30
-#define DMA_REQ_UART1_R       31
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
deleted file mode 100644
index e4db679f776..00000000000
--- a/arch/arm/mach-imx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#define AITC_NIVECSR   0x40
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
-		@ Load offset & priority of the highest priority
-		@ interrupt pending.
-		ldr	\irqstat, [\base, #AITC_NIVECSR]
-		@ Shift off the priority leaving the offset or
-		@ "interrupt number", use arithmetic shift to
-		@ transform illegal source (0xffff) as -1
-		mov	\irqnr, \irqstat, asr #16
-		adds	\tmp, \irqnr, #1
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
deleted file mode 100644
index 6c2942f8292..00000000000
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL	0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define IMX_GPIO_ALLOC_MODE_RELEASE	8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if(value)
-		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-	else
-		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-	raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-	if(__builtin_constant_p(gpio))
-		imx_gpio_set_value_inline(gpio, value);
-	else
-		__imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-
-	imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-	return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
deleted file mode 100644
index c73e9e724c7..00000000000
--- a/arch/arm/mach-imx/include/mach/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS		0x00200000
-#define IMX_IO_SIZE		0x00100000
-#define IMX_IO_BASE		0xe0000000
-
-#define IMX_CS0_PHYS		0x10000000
-#define IMX_CS0_SIZE		0x02000000
-#define IMX_CS0_VIRT		0xe8000000
-
-#define IMX_CS1_PHYS		0x12000000
-#define IMX_CS1_SIZE		0x01000000
-#define IMX_CS1_VIRT		0xea000000
-
-#define IMX_CS2_PHYS		0x13000000
-#define IMX_CS2_SIZE		0x01000000
-#define IMX_CS2_VIRT		0xeb000000
-
-#define IMX_CS3_PHYS		0x14000000
-#define IMX_CS3_SIZE		0x01000000
-#define IMX_CS3_VIRT		0xec000000
-
-#define IMX_CS4_PHYS		0x15000000
-#define IMX_CS4_SIZE		0x01000000
-#define IMX_CS4_VIRT		0xed000000
-
-#define IMX_CS5_PHYS		0x16000000
-#define IMX_CS5_SIZE		0x01000000
-#define IMX_CS5_VIRT		0xee000000
-
-#define IMX_FB_VIRT		0xF1000000
-#define IMX_FB_SIZE		(256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE		0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
deleted file mode 100644
index bbe54df7f0d..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS  11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-	const char *name;
-	void (*irq_handler) (int, void *);
-	void (*err_handler) (int, void *, int errcode);
-	void *data;
-	unsigned int  dma_mode;
-	struct scatterlist *sg;
-	unsigned int sgbc;
-	unsigned int sgcount;
-	unsigned int resbytes;
-	int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST     1
-#define IMX_DMA_ERR_REQUEST   2
-#define IMX_DMA_ERR_TRANSFER  4
-#define IMX_DMA_ERR_BUFFER    8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ		0
-#define DMA_MODE_WRITE		1
-#define DMA_MODE_MASK		1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		void (*irq_handler) (int, void *),
-		void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif	/* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
deleted file mode 100644
index 490297fc0e3..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ /dev/null
@@ -1,376 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- *  Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART	(1<<22)
-#define CSCR_MPLL_RESTART	(1<<21)
-#define CSCR_SYSTEM_SEL		(1<<16)
-#define CSCR_BCLK_DIV		(0xf<<10)
-#define CSCR_MPU_PRESC		(1<<15)
-#define CSCR_SPEN		(1<<1)
-#define CSCR_MPEN		(1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX  3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT   (1<<7)
-#define GPIO_IN    (0<<7)
-#define GPIO_PUEN  (1<<8)
-
-#define GPIO_PF    (0<<9)
-#define GPIO_AF    (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN   (0<<10)
-#define GPIO_BIN   (1<<10)
-#define GPIO_CIN   (2<<10)
-#define GPIO_DR    (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT     (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0   (2<<12)
-#define GPIO_AOUT_1   (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT      (0<<14)
-#define GPIO_BOUT_ISR  (1<<14)
-#define GPIO_BOUT_0    (2<<14)
-#define GPIO_BOUT_1    (3<<14)
-
-#define GPIO_GIUS      (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
-#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
-#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
-#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
-#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
-#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
-
-#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
-#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
-#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
-#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
-#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
-#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
-#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
-#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
-#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
-
-/*
- *  DMA Controller
- */
-#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
-#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
-#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
-#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
-#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
-#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
-#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
-#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
-#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
-#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
-#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
-#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
-#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
-#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
-#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
-#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
-#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
-#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff )
-#define CNTR_CNT(x)        ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
-#define CCR_DMOD_2D        ( 0x1 << 12 )
-#define CCR_DMOD_FIFO      ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
-#define CCR_SMOD_2D        ( 0x1 << 10 )
-#define CCR_SMOD_FIFO      ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        ( 0x0 << 6 )
-#define CCR_DSIZ_8         ( 0x1 << 6 )
-#define CCR_DSIZ_16        ( 0x2 << 6 )
-#define CCR_SSIZ_32        ( 0x0 << 4 )
-#define CCR_SSIZ_8         ( 0x1 << 4 )
-#define CCR_SSIZ_16        ( 0x2 << 4 )
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- *  Interrupt controller
- */
-
-#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD       (1<<19)
-#define INTCNTL_NIAD       (1<<20)
-
-#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
-
-/*
- *  General purpose timers
- */
-#define IMX_TCTL(x)        __REG( 0x00 + (x))
-#define TCTL_SWR           (1<<15)
-#define TCTL_FRR           (1<<8)
-#define TCTL_CAP_RIS       (1<<6)
-#define TCTL_CAP_FAL       (2<<6)
-#define TCTL_CAP_RIS_FAL   (3<<6)
-#define TCTL_OM            (1<<5)
-#define TCTL_IRQEN         (1<<4)
-#define TCTL_CLK_PCLK1     (1<<1)
-#define TCTL_CLK_PCLK1_16  (2<<1)
-#define TCTL_CLK_TIN       (3<<1)
-#define TCTL_CLK_32        (4<<1)
-#define TCTL_TEN           (1<<0)
-
-#define IMX_TPRER(x)       __REG( 0x04 + (x))
-#define IMX_TCMP(x)        __REG( 0x08 + (x))
-#define IMX_TCR(x)         __REG( 0x0C + (x))
-#define IMX_TCN(x)         __REG( 0x10 + (x))
-#define IMX_TSTAT(x)       __REG( 0x14 + (x))
-#define TSTAT_CAPT         (1<<1)
-#define TSTAT_COMP         (1<<0)
-
-#endif				// _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
deleted file mode 100644
index d54eb1d4802..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-};
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
deleted file mode 100644
index 67812c5ac1f..00000000000
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START	0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
deleted file mode 100644
index 4712f354dcc..00000000000
--- a/arch/arm/mach-imx/include/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
-	int (*card_present)(struct device *);
-	int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
deleted file mode 100644
index def05d510eb..00000000000
--- a/arch/arm/mach-imx/include/mach/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS		0x10000000
-#define MX1ADS_FLASH_SIZE		(16*1024*1024)
-
-#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
deleted file mode 100644
index 4186430feec..00000000000
--- a/arch/arm/mach-imx/include/mach/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *	SPI slaves, and are numbered from zero to num_chipselects - 1.
- *	each slave has a chipselect signal, but it's common that not
- *	every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
-	u8 num_chipselect;
-	u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- *	sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- *	dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- *	I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
-	u8	enable_loopback:1;
-	u8	enable_dma:1;
-	u8	ins_ss_pulse:1;
-	u16	bclk_wait:15;
-	void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT			(1 << 0)
-#define SPI_CS_DEASSERT			(1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 70523e67a8f..00000000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = UART1_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		serial_port = UART2_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		return;
-	} while(0);
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
deleted file mode 100644
index 531b95deadc..00000000000
--- a/arch/arm/mach-imx/irq.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/irq.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  03/03/2004   Sascha Hauer <sascha@saschahauer.de>
- *               Copied from the motorola bsp package and added gpio demux
- *               interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF               0x00
-#define NIMASK_OFF                0x04
-#define INTENNUM_OFF              0x08
-#define INTDISNUM_OFF             0x0C
-#define INTENABLEH_OFF            0x10
-#define INTENABLEL_OFF            0x14
-#define INTTYPEH_OFF              0x18
-#define INTTYPEL_OFF              0x1C
-#define NIPRIORITY_OFF(x)         (0x20+4*(7-(x)))
-#define NIVECSR_OFF               0x40
-#define FIVECSR_OFF               0x44
-#define INTSRCH_OFF               0x48
-#define INTSRCL_OFF               0x4C
-#define INTFRCH_OFF               0x50
-#define INTFRCL_OFF               0x54
-#define NIPNDH_OFF                0x58
-#define NIPNDL_OFF                0x5C
-#define FIPNDH_OFF                0x60
-#define FIPNDL_OFF                0x64
-
-#define VA_AITC_BASE              IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL         (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK          (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM        (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH      (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL      (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH        (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL        (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x)   (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR         (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR         (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH         (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL         (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH         (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL         (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH          (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL          (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH          (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL          (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...)	printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...)	do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-	unsigned int irqt;
-
-	if (irq >= IMX_IRQS)
-		return -EINVAL;
-
-	if (irq < IMX_IRQS / 2) {
-		irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
-	} else {
-		irq -= IMX_IRQS / 2;
-		irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
-	unsigned int irq_type = 0, irq, reg, bit;
-
-	irq = _irq - IRQ_GPIOA(0);
-	reg = irq >> 5;
-	bit = 1 << (irq % 32);
-
-	if (type == IRQ_TYPE_PROBE) {
-		/* Don't mess with enabled GPIOs using preconfigured edges or
-		   GPIOs set to alternate function during probe */
-		/* TODO: support probe */
-//              if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-//                  GPIO_bit(gpio))
-//                      return 0;
-//              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-//                      return 0;
-//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	GIUS(reg) |= bit;
-	DDIR(reg) &= ~(bit);
-
-	DEBUG_IRQ("setting type of irq %d to ", _irq);
-
-	if (type & IRQ_TYPE_EDGE_RISING) {
-		DEBUG_IRQ("rising edges\n");
-		irq_type = 0x0;
-	}
-	if (type & IRQ_TYPE_EDGE_FALLING) {
-		DEBUG_IRQ("falling edges\n");
-		irq_type = 0x1;
-	}
-	if (type & IRQ_TYPE_LEVEL_LOW) {
-		DEBUG_IRQ("low level\n");
-		irq_type = 0x3;
-	}
-	if (type & IRQ_TYPE_LEVEL_HIGH) {
-		DEBUG_IRQ("high level\n");
-		irq_type = 0x2;
-	}
-
-	if (irq % 32 < 16) {
-		ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	} else {
-		ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	}
-
-	return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-	while (mask) {
-		if (mask & 1) {
-			DEBUG_IRQ("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		mask >>= 1;
-	}
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(0);
-	irq = IRQ_GPIOA(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(1);
-	irq = IRQ_GPIOB(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(2);
-	irq = IRQ_GPIOC(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(3);
-	irq = IRQ_GPIOD(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
-	.name = "MPU",
-	.ack = imx_mask_irq,
-	.mask = imx_mask_irq,
-	.unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
-	.name = "GPIO",
-	.ack = imx_gpio_ack_irq,
-	.mask = imx_gpio_mask_irq,
-	.unmask = imx_gpio_unmask_irq,
-	.set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
-	unsigned int irq;
-
-	DEBUG_IRQ("Initializing imx interrupts\n");
-
-	/* Disable all interrupts initially. */
-	/* Do not rely on the bootloader. */
-	__raw_writel(0, IMX_AITC_INTENABLEH);
-	__raw_writel(0, IMX_AITC_INTENABLEL);
-
-	/* Mask all GPIO interrupts as well */
-	IMR(0) = 0;
-	IMR(1) = 0;
-	IMR(2) = 0;
-	IMR(3) = 0;
-
-	for (irq = 0; irq < IMX_IRQS; irq++) {
-		set_irq_chip(irq, &imx_internal_chip);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
-		set_irq_chip(irq, &imx_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
-	/* Release masking of interrupts according to priority */
-	__raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
-	/* Initialize FIQ */
-	init_FIQ();
-#endif
-}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
deleted file mode 100644
index 1d48f2762cb..00000000000
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		DR(0) &= ~(1<<2);
-		break;
-
-	case led_idle_end:
-		DR(0) |= 1<<2;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		DR(0) ^= 1<<2;
-#endif
-	default:
-		break;
-	}
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
deleted file mode 100644
index cf30803e019..00000000000
--- a/arch/arm/mach-imx/leds.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
-	if (machine_is_mx1ads()) {
-		leds_event = mx1ads_leds_event;
-	}
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
deleted file mode 100644
index 49dc1c1da33..00000000000
--- a/arch/arm/mach-imx/leds.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
deleted file mode 100644
index 87fa1ff43b0..00000000000
--- a/arch/arm/mach-imx/mx1ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
-	[0] = {
-		.start	= IMX_CS4_PHYS + 0x300,
-		.end	= IMX_CS4_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_GPIOC(17),
-		.end	= IRQ_GPIOC(17),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cs89x0_device = {
-	.name		= "cirrus-cs89x0",
-	.num_resources	= ARRAY_SIZE(cs89x0_resources),
-	.resource	= cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00206000,
-		.end	= 0x002060FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART1_MINT_RX),
-		.end	= (UART1_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART1_MINT_TX),
-		.end	= (UART1_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct resource imx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00207000,
-		.end	= 0x002070FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART2_MINT_RX),
-		.end	= (UART2_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART2_MINT_TX),
-		.end	= (UART2_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cs89x0_device,
-	&imx_uart1_device,
-	&imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
-	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
-	return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
-       .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
-	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-	/* SD/MMC card detect */
-	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
-	imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
-	imx_gpio_mode(PC9_PF_UART1_CTS);
-	imx_gpio_mode(PC10_PF_UART1_RTS);
-	imx_gpio_mode(PC11_PF_UART1_TXD);
-	imx_gpio_mode(PC12_PF_UART1_RXD);
-
-	imx_gpio_mode(PB28_PF_UART2_CTS);
-	imx_gpio_mode(PB29_PF_UART2_RTS);
-	imx_gpio_mode(PB30_PF_UART2_TXD);
-	imx_gpio_mode(PB31_PF_UART2_RXD);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
-	imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
-	.boot_params	= 0x08000100,
-	.map_io		= mx1ads_map_io,
-	.init_irq	= imx_init_irq,
-	.timer		= &imx_timer,
-	.init_machine	= mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
deleted file mode 100644
index 5aef18b599e..00000000000
--- a/arch/arm/mach-imx/time.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_imx;
-	uint32_t tstat;
-	irqreturn_t ret = IRQ_NONE;
-
-	/* clear the interrupt */
-	tstat = IMX_TSTAT(TIMER_BASE);
-	IMX_TSTAT(TIMER_BASE) = 0;
-
-	if (tstat & TSTAT_COMP) {
-		evt->event_handler(evt);
-		ret = IRQ_HANDLED;
-	}
-
-	return ret;
-}
-
-static struct irqaction imx_timer_irq = {
-	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-	IMX_TCTL(TIMER_BASE) = 0;
-	IMX_TPRER(TIMER_BASE) = 0;
-
-	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
-	return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
-	.name 		= "imx_timer1",
-	.rating		= 200,
-	.read		= imx_get_cycles,
-	.mask		= 0xFFFFFFFF,
-	.shift 		= 20,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
-	clocksource_imx.mult =
-		clocksource_hz2mult(rate, clocksource_imx.shift);
-	clocksource_register(&clocksource_imx);
-
-	return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
-				  struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = IMX_TCN(TIMER_BASE) + evt;
-	IMX_TCMP(TIMER_BASE) = tcmp;
-
-	return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call imx_set_next_event()
-	 */
-	local_irq_save(flags);
-	/* Disable interrupt in GPT module */
-	IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-		IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
-		/* Clear pending interrupt */
-		IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
-	}
-
-#ifdef DEBUG
-	printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
-		clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
-	/* Remember timer mode */
-	clockevent_mode = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/*
-		 * Do not put overhead of interrupt enable/disable into
-		 * imx_set_next_event(), the core has about 4 minutes
-		 * to call imx_set_next_event() or shutdown clock after
-		 * mode switching
-		 */
-		local_irq_save(flags);
-		IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appears */
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_imx = {
-	.name		= "imx_timer1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= imx_set_mode,
-	.set_next_event	= imx_set_next_event,
-	.rating		= 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
-	clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
-					clockevent_imx.shift);
-	clockevent_imx.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_imx);
-	clockevent_imx.min_delta_ns =
-		clockevent_delta2ns(0xf, &clockevent_imx);
-
-	clockevent_imx.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_imx);
-
-	return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	imx_clocks_init();
-
-	clk = clk_get(NULL, "perclk1");
-	clk_enable(clk);
-	rate = clk_get_rate(clk);
-
-	imx_timer_hardware_init();
-	imx_clocksource_init(rate);
-
-	imx_clockevent_init(rate);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
-	.init		= imx_timer_init,
-};
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2c5a02b8520..264f4d59f89 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -78,6 +78,12 @@ config MACH_IXDP465
 	  IXDP465 Development Platform (Also known as BMP).
 	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_GORAMO_MLR
+	bool "GORAMO Multi Link Router"
+	help
+	  Say 'Y' here if you want your kernel to support GORAMO
+	  MultiLink router.
+
 config MACH_KIXRP435
 	bool "KIXRP435"
 	help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 2e6bbf927a7..47d1f60d23f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
new file mode 100644
index 00000000000..a733b8ff3ce
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -0,0 +1,507 @@
+/*
+ * Goramo MultiLink router platform code
+ * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/pci.h>
+
+#define xgpio_irq(n)		(IRQ_IXP4XX_GPIO ## n)
+#define gpio_irq(n)		xgpio_irq(n)
+
+#define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
+#define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
+#define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
+#define SLOT_NEC		0x0E	/* IDSEL = AD18 */
+
+#define IRQ_ETHA		IRQ_IXP4XX_GPIO4
+#define IRQ_ETHB		IRQ_IXP4XX_GPIO5
+#define IRQ_NEC			IRQ_IXP4XX_GPIO3
+#define IRQ_MPCI		IRQ_IXP4XX_GPIO12
+
+/* GPIO lines */
+#define GPIO_SCL		0
+#define GPIO_SDA		1
+#define GPIO_STR		2
+#define GPIO_HSS0_DCD_N		6
+#define GPIO_HSS1_DCD_N		7
+#define GPIO_HSS0_CTS_N		10
+#define GPIO_HSS1_CTS_N		11
+#define GPIO_HSS1_RTS_N		13
+#define GPIO_HSS0_RTS_N		14
+
+/* Control outputs from 74HC4094 */
+#define CONTROL_HSS0_CLK_INT	0
+#define CONTROL_HSS1_CLK_INT	1
+#define CONTROL_HSS0_DTR_N	2
+#define CONTROL_HSS1_DTR_N	3
+#define CONTROL_EXT		4
+#define CONTROL_AUTO_RESET	5
+#define CONTROL_PCI_RESET_N	6
+#define CONTROL_EEPROM_WC_N	7
+
+/* offsets from start of flash ROM = 0x50000000 */
+#define CFG_ETH0_ADDRESS	0x40 /* 6 bytes */
+#define CFG_ETH1_ADDRESS	0x46 /* 6 bytes */
+#define CFG_REV			0x4C /* u32 */
+#define CFG_SDRAM_SIZE		0x50 /* u32 */
+#define CFG_SDRAM_CONF		0x54 /* u32 */
+#define CFG_SDRAM_MODE		0x58 /* u32 */
+#define CFG_SDRAM_REFRESH	0x5C /* u32 */
+
+#define CFG_HW_BITS		0x60 /* u32 */
+#define  CFG_HW_USB_PORTS	0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
+#define  CFG_HW_HAS_PCI_SLOT	0x00000008
+#define  CFG_HW_HAS_ETH0	0x00000010
+#define  CFG_HW_HAS_ETH1	0x00000020
+#define  CFG_HW_HAS_HSS0	0x00000040
+#define  CFG_HW_HAS_HSS1	0x00000080
+#define  CFG_HW_HAS_UART0	0x00000100
+#define  CFG_HW_HAS_UART1	0x00000200
+#define  CFG_HW_HAS_EEPROM	0x00000400
+
+#define FLASH_CMD_READ_ARRAY	0xFF
+#define FLASH_CMD_READ_ID	0x90
+#define FLASH_SER_OFF		0x102 /* 0x81 in 16-bit mode */
+
+static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
+static u8 control_value;
+
+static void set_scl(u8 value)
+{
+	gpio_line_set(GPIO_SCL, !!value);
+	udelay(3);
+}
+
+static void set_sda(u8 value)
+{
+	gpio_line_set(GPIO_SDA, !!value);
+	udelay(3);
+}
+
+static void set_str(u8 value)
+{
+	gpio_line_set(GPIO_STR, !!value);
+	udelay(3);
+}
+
+static inline void set_control(int line, int value)
+{
+	if (value)
+		control_value |=  (1 << line);
+	else
+		control_value &= ~(1 << line);
+}
+
+
+static void output_control(void)
+{
+	int i;
+
+	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+
+	for (i = 0; i < 8; i++) {
+		set_scl(0);
+		set_sda(control_value & (0x80 >> i)); /* MSB first */
+		set_scl(1);	/* active edge */
+	}
+
+	set_str(1);
+	set_str(0);
+
+	set_scl(0);
+	set_sda(1);		/* Be ready for START */
+	set_scl(1);
+}
+
+
+static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
+
+static int hss_set_clock(int port, unsigned int clock_type)
+{
+	int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
+
+	switch (clock_type) {
+	case CLOCK_DEFAULT:
+	case CLOCK_EXT:
+		set_control(ctrl_int, 0);
+		output_control();
+		return CLOCK_EXT;
+
+	case CLOCK_INT:
+		set_control(ctrl_int, 1);
+		output_control();
+		return CLOCK_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t hss_dcd_irq(int irq, void *pdev)
+{
+	int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	set_carrier_cb_tab[port](pdev, !i);
+	return IRQ_HANDLED;
+}
+
+
+static int hss_open(int port, void *pdev,
+		    void (*set_carrier_cb)(void *pdev, int carrier))
+{
+	int i, irq;
+
+	if (!port)
+		irq = gpio_irq(GPIO_HSS0_DCD_N);
+	else
+		irq = gpio_irq(GPIO_HSS1_DCD_N);
+
+	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	set_carrier_cb(pdev, !i);
+
+	set_carrier_cb_tab[!!port] = set_carrier_cb;
+
+	if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
+		printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
+		       irq, i);
+		return i;
+	}
+
+	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
+	output_control();
+	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+	return 0;
+}
+
+static void hss_close(int port, void *pdev)
+{
+	free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
+		 pdev);
+	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
+
+	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
+	output_control();
+	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+}
+
+
+/* Flash memory */
+static struct flash_platform_data flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device device_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= { .platform_data = &flash_data },
+	.num_resources	= 1,
+	.resource	= &flash_resource,
+};
+
+
+/* I^2C interface */
+static struct i2c_gpio_platform_data i2c_data = {
+	.sda_pin	= GPIO_SDA,
+	.scl_pin	= GPIO_SCL,
+};
+
+static struct platform_device device_i2c = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= { .platform_data = &i2c_data },
+};
+
+
+/* IXP425 2 UART ports */
+static struct resource uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct plat_serial8250_port uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char __iomem *)IXP4XX_UART1_BASE_VIRT +
+			REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char __iomem *)IXP4XX_UART2_BASE_VIRT +
+			REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device device_uarts = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= uart_data,
+	.num_resources		= 2,
+	.resource		= uart_resources,
+};
+
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info eth_plat[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 32,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 33,
+	}
+};
+
+static struct platform_device device_eth_tab[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= eth_plat,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= eth_plat + 1,
+	}
+};
+
+
+/* IXP425 2 synchronous serial ports */
+static struct hss_plat_info hss_plat[] = {
+	{
+		.set_clock	= hss_set_clock,
+		.open		= hss_open,
+		.close		= hss_close,
+		.txreadyq	= 34,
+	}, {
+		.set_clock	= hss_set_clock,
+		.open		= hss_open,
+		.close		= hss_close,
+		.txreadyq	= 35,
+	}
+};
+
+static struct platform_device device_hss_tab[] = {
+	{
+		.name			= "ixp4xx_hss",
+		.id			= 0,
+		.dev.platform_data	= hss_plat,
+	}, {
+		.name			= "ixp4xx_hss",
+		.id			= 1,
+		.dev.platform_data	= hss_plat + 1,
+	}
+};
+
+
+static struct platform_device *device_tab[6] __initdata = {
+	&device_flash,		/* index 0 */
+};
+
+static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+	return __raw_readb(flash + addr);
+#else
+	return __raw_readb(flash + (addr ^ 3));
+#endif
+}
+
+static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+	return __raw_readw(flash + addr);
+#else
+	return __raw_readw(flash + (addr ^ 2));
+#endif
+}
+
+static void __init gmlr_init(void)
+{
+	u8 __iomem *flash;
+	int i, devices = 1; /* flash */
+
+	ixp4xx_sys_init();
+
+	if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
+		printk(KERN_ERR "goramo-mlr: unable to access system"
+		       " configuration data\n");
+	else {
+		system_rev = __raw_readl(flash + CFG_REV);
+		hw_bits = __raw_readl(flash + CFG_HW_BITS);
+
+		for (i = 0; i < ETH_ALEN; i++) {
+			eth_plat[0].hwaddr[i] =
+				flash_readb(flash, CFG_ETH0_ADDRESS + i);
+			eth_plat[1].hwaddr[i] =
+				flash_readb(flash, CFG_ETH1_ADDRESS + i);
+		}
+
+		__raw_writew(FLASH_CMD_READ_ID, flash);
+		system_serial_high = flash_readw(flash, FLASH_SER_OFF);
+		system_serial_high <<= 16;
+		system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
+		system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
+		system_serial_low <<= 16;
+		system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
+		__raw_writew(FLASH_CMD_READ_ARRAY, flash);
+
+		iounmap(flash);
+	}
+
+	switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
+	case CFG_HW_HAS_UART0:
+		memset(&uart_data[1], 0, sizeof(uart_data[1]));
+		device_uarts.num_resources = 1;
+		break;
+
+	case CFG_HW_HAS_UART1:
+		device_uarts.dev.platform_data = &uart_data[1];
+		device_uarts.resource = &uart_resources[1];
+		device_uarts.num_resources = 1;
+		break;
+	}
+	if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
+		device_tab[devices++] = &device_uarts; /* max index 1 */
+
+	if (hw_bits & CFG_HW_HAS_ETH0)
+		device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
+	if (hw_bits & CFG_HW_HAS_ETH1)
+		device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
+
+	if (hw_bits & CFG_HW_HAS_HSS0)
+		device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
+	if (hw_bits & CFG_HW_HAS_HSS1)
+		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+
+	if (hw_bits & CFG_HW_HAS_EEPROM)
+		device_tab[devices++] = &device_i2c; /* max index 6 */
+
+	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
+	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
+	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+	set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+
+	set_control(CONTROL_HSS0_DTR_N, 1);
+	set_control(CONTROL_HSS1_DTR_N, 1);
+	set_control(CONTROL_EEPROM_WC_N, 1);
+	set_control(CONTROL_PCI_RESET_N, 1);
+	output_control();
+
+	msleep(1);	      /* Wait for PCI devices to initialize */
+
+	flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	platform_add_devices(device_tab, devices);
+}
+
+
+#ifdef CONFIG_PCI
+static void __init gmlr_pci_preinit(void)
+{
+	set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+	ixp4xx_pci_preinit();
+}
+
+static void __init gmlr_pci_postinit(void)
+{
+	if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
+	    (hw_bits & CFG_HW_USB_PORTS) < 5) {
+		/* need to adjust number of USB ports on NEC chip */
+		u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
+		if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
+			value &= ~7;
+			value |= (hw_bits & CFG_HW_USB_PORTS);
+			ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
+		}
+	}
+}
+
+static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	switch(slot) {
+	case SLOT_ETHA:	return IRQ_ETHA;
+	case SLOT_ETHB:	return IRQ_ETHB;
+	case SLOT_NEC:	return IRQ_NEC;
+	default:	return IRQ_MPCI;
+	}
+}
+
+static struct hw_pci gmlr_hw_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= gmlr_pci_preinit,
+	.postinit	= gmlr_pci_postinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= gmlr_map_irq,
+};
+
+static int __init gmlr_pci_init(void)
+{
+	if (machine_is_goramo_mlr() &&
+	    (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
+		pci_common_init(&gmlr_hw_pci);
+	return 0;
+}
+
+subsys_initcall(gmlr_pci_init);
+#endif /* CONFIG_PCI */
+
+
+MACHINE_START(GORAMO_MLR, "MultiLink")
+	/* Maintainer: Krzysztof Halasa */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= gmlr_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index def7773be67..b2ef65db0e9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -26,6 +26,8 @@
 #define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
 #define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
 
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+				IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
 			 IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
@@ -35,8 +37,11 @@
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-	unsigned int val = ~*IXP4XX_EXP_CFG2;
+	u32 val = ~*IXP4XX_EXP_CFG2;
 
+	if (cpu_is_ixp42x_rev_a0())
+		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+					       IXP4XX_FEATURE_AES);
 	if (cpu_is_ixp42x())
 		return val & IXP42X_FEATURE_MASK;
 	if (cpu_is_ixp43x())
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 0cbe6ceb67c..9e7cad2d54c 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -15,7 +15,7 @@
 #define DEBUG_QMGR	0
 
 #define HALF_QUEUES	32
-#define QUEUES		64	/* only 32 lower queues currently supported */
+#define QUEUES		64
 #define MAX_QUEUE_LENGTH 4	/* in dwords */
 
 #define QUEUE_STAT1_EMPTY		1 /* queue status bits */
@@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue)
 	return val;
 }
 
-static inline int qmgr_get_stat1(unsigned int queue)
+static inline int __qmgr_get_stat1(unsigned int queue)
 {
 	extern struct qmgr_regs __iomem *qmgr_regs;
 	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
 		>> ((queue & 7) << 2)) & 0xF;
 }
 
-static inline int qmgr_get_stat2(unsigned int queue)
+static inline int __qmgr_get_stat2(unsigned int queue)
 {
 	extern struct qmgr_regs __iomem *qmgr_regs;
+	BUG_ON(queue >= HALF_QUEUES);
 	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
 		>> ((queue & 0xF) << 1)) & 0x3;
 }
 
+/**
+ * qmgr_stat_empty() - checks if a hardware queue is empty
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is empty.
+ */
 static inline int qmgr_stat_empty(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+	BUG_ON(queue >= HALF_QUEUES);
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
+/**
+ * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is below low watermark.
+ */
+static inline int qmgr_stat_below_low_watermark(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	if (queue >= HALF_QUEUES)
+		return (__raw_readl(&qmgr_regs->statne_h) >>
+			(queue - HALF_QUEUES)) & 0x01;
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
 }
 
-static inline int qmgr_stat_nearly_full(unsigned int queue)
+/**
+ * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is above high watermark
+ */
+static inline int qmgr_stat_above_high_watermark(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+	BUG_ON(queue >= HALF_QUEUES);
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
 }
 
+/**
+ * qmgr_stat_full() - checks if a hardware queue is full
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue is full.
+ */
 static inline int qmgr_stat_full(unsigned int queue)
 {
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	if (queue >= HALF_QUEUES)
+		return (__raw_readl(&qmgr_regs->statf_h) >>
+			(queue - HALF_QUEUES)) & 0x01;
+	return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
 }
 
+/**
+ * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue experienced underflow.
+ */
 static inline int qmgr_stat_underflow(unsigned int queue)
 {
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+	return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
 }
 
+/**
+ * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
+ * @queue:	queue number
+ *
+ * Returns non-zero value if the queue experienced overflow.
+ */
 static inline int qmgr_stat_overflow(unsigned int queue)
 {
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+	return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
 }
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 7bb8e778e4b..47ac69c7ec7 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe)
 	/* reset the NPE */
 	ixp4xx_write_feature_bits(val &
 				  ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-	for (i = 0; i < MAX_RETRIES; i++) {
-		if (!(ixp4xx_read_feature_bits() &
-		      (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
-			break;	/* reset completed */
-		udelay(1);
-	}
-	if (i == MAX_RETRIES)
-		return -ETIMEDOUT;
-
 	/* deassert reset */
 	ixp4xx_write_feature_bits(val |
 				  (IXP4XX_FEATURE_RESET_NPEA << npe->id));
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index bfddc73d0a2..bfdbe4b5a3c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs;
 static struct resource *mem_res;
 static spinlock_t qmgr_lock;
 static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-static void *irq_pdevs[HALF_QUEUES];
+static void (*irq_handlers[QUEUES])(void *pdev);
+static void *irq_pdevs[QUEUES];
 
 #if DEBUG_QMGR
 char qmgr_queue_descs[QUEUES][32];
@@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32];
 void qmgr_set_irq(unsigned int queue, int src,
 		  void (*handler)(void *pdev), void *pdev)
 {
-	u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
-	int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
 	unsigned long flags;
 
-	src &= 7;
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+	if (queue < HALF_QUEUES) {
+		u32 __iomem *reg;
+		int bit;
+		BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
+		reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
+		bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+		__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
+			     reg);
+	} else
+		/* IRQ source for queues 32-63 is fixed */
+		BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
+
 	irq_handlers[queue] = handler;
 	irq_pdevs[queue] = pdev;
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 
-static irqreturn_t qmgr_irq1(int irq, void *pdev)
+static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
 {
-	int i;
-	u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
-	__raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-
-	for (i = 0; i < HALF_QUEUES; i++)
-		if (val & (1 << i))
+	int i, ret = 0;
+	u32 en_bitmap, src, stat;
+
+	/* ACK - it may clear any bits so don't rely on it */
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
+
+	en_bitmap = qmgr_regs->irqen[0];
+	while (en_bitmap) {
+		i = __fls(en_bitmap); /* number of the last "low" queue */
+		en_bitmap &= ~BIT(i);
+		src = qmgr_regs->irqsrc[i >> 3];
+		stat = qmgr_regs->stat1[i >> 3];
+		if (src & 4) /* the IRQ condition is inverted */
+			stat = ~stat;
+		if (stat & BIT(src & 3)) {
 			irq_handlers[i](irq_pdevs[i]);
+			ret = IRQ_HANDLED;
+		}
+	}
+	return ret;
+}
+
+
+static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
+{
+	int i, ret = 0;
+	u32 req_bitmap;
+
+	/* ACK - it may clear any bits so don't rely on it */
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
+
+	req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
+	while (req_bitmap) {
+		i = __fls(req_bitmap); /* number of the last "high" queue */
+		req_bitmap &= ~BIT(i);
+		irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
 
-	return val ? IRQ_HANDLED : 0;
+
+static irqreturn_t qmgr_irq(int irq, void *pdev)
+{
+	int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
+	u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
+
+	if (!req_bitmap)
+		return 0;
+	__raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
+
+	while (req_bitmap) {
+		i = __fls(req_bitmap); /* number of the last queue */
+		req_bitmap &= ~BIT(i);
+		i += half * HALF_QUEUES;
+		irq_handlers[i](irq_pdevs[i]);
+	}
+	return IRQ_HANDLED;
 }
 
 
 void qmgr_enable_irq(unsigned int queue)
 {
 	unsigned long flags;
+	int half = queue / 32;
+	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
-		     &qmgr_regs->irqen[0]);
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
+		     &qmgr_regs->irqen[half]);
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
 void qmgr_disable_irq(unsigned int queue)
 {
 	unsigned long flags;
+	int half = queue / 32;
+	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
 
 	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
-		     &qmgr_regs->irqen[0]);
-	__raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
+		     &qmgr_regs->irqen[half]);
+	__raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
 	spin_unlock_irqrestore(&qmgr_lock, flags);
 }
 
@@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
 	u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
 	int err;
 
-	if (queue >= HALF_QUEUES)
-		return -ERANGE;
+	BUG_ON(queue >= QUEUES);
 
 	if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
 		return -EINVAL;
@@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue)
 {
 	u32 cfg, addr, mask[4];
 
-	BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+	BUG_ON(queue >= QUEUES); /* not in valid range */
 
 	spin_lock_irq(&qmgr_lock);
 	cfg = __raw_readl(&qmgr_regs->sram[queue]);
@@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue)
 static int qmgr_init(void)
 {
 	int i, err;
+	irq_handler_t handler1, handler2;
+
 	mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
 				     IXP4XX_QMGR_REGION_SIZE,
 				     "IXP4xx Queue Manager");
@@ -247,23 +309,42 @@ static int qmgr_init(void)
 		__raw_writel(0, &qmgr_regs->irqen[i]);
 	}
 
+	__raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
+	__raw_writel(0, &qmgr_regs->statf_h);
+
 	for (i = 0; i < QUEUES; i++)
 		__raw_writel(0, &qmgr_regs->sram[i]);
 
-	err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
-			  "IXP4xx Queue Manager", NULL);
+	if (cpu_is_ixp42x_rev_a0()) {
+		handler1 = qmgr_irq1_a0;
+		handler2 = qmgr_irq2_a0;
+	} else
+		handler1 = handler2 = qmgr_irq;
+
+	err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
+			  NULL);
 	if (err) {
-		printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
-		       IRQ_IXP4XX_QM1);
+		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+		       IRQ_IXP4XX_QM1, err);
 		goto error_irq;
 	}
 
+	err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
+			  NULL);
+	if (err) {
+		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+		       IRQ_IXP4XX_QM2, err);
+		goto error_irq2;
+	}
+
 	used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
 	spin_lock_init(&qmgr_lock);
 
 	printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
 	return 0;
 
+error_irq2:
+	free_irq(IRQ_IXP4XX_QM1, NULL);
 error_irq:
 	iounmap(qmgr_regs);
 error_map:
@@ -274,7 +355,9 @@ error_map:
 static void qmgr_remove(void)
 {
 	free_irq(IRQ_IXP4XX_QM1, NULL);
+	free_irq(IRQ_IXP4XX_QM2, NULL);
 	synchronize_irq(IRQ_IXP4XX_QM1);
+	synchronize_irq(IRQ_IXP4XX_QM2);
 	iounmap(qmgr_regs);
 	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
 }
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index b5421cccd7e..25100f7acf4 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,12 @@ config MACH_RD88F6281
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
+config MACH_MV88F6281GTW_GE
+	bool "Marvell 88F6281 GTW GE Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell 88F6281 GTW GE Board.
+
 config MACH_SHEEVAPLUG
 	bool "Marvell SheevaPlug Reference Board"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 8f03c9b9bdd..9dd680e964d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -3,5 +3,8 @@ obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 5db4f0bbe5e..1da5d1c18ec 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -20,6 +20,7 @@
  */
 #define TARGET_DDR		0
 #define TARGET_DEV_BUS		1
+#define TARGET_SRAM		3
 #define TARGET_PCIE		4
 #define ATTR_DEV_SPI_ROM	0x1e
 #define ATTR_DEV_BOOT		0x1d
@@ -30,6 +31,7 @@
 #define ATTR_DEV_CS0		0x3e
 #define ATTR_PCIE_IO		0xe0
 #define ATTR_PCIE_MEM		0xe8
+#define ATTR_SRAM		0x01
 
 /*
  * Helpers to get DDR bank info
@@ -48,7 +50,6 @@
 
 
 struct mbus_dram_target_info kirkwood_mbus_dram_info;
-static int __initdata win_alloc_count;
 
 static int __init cpu_win_can_remap(int win)
 {
@@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void)
 	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
 		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
 
-	win_alloc_count = 3;
+	/*
+	 * Setup window for SRAM.
+	 */
+	setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+		      TARGET_SRAM, ATTR_SRAM, -1);
 
 	/*
 	 * Setup MBUS dram target info.
@@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void)
 	}
 	kirkwood_mbus_dram_info.num_cs = cs;
 }
-
-void __init kirkwood_setup_sram_win(u32 base, u32 size)
-{
-	setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index be1ca28fed3..0f691983801 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
 #include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
 #include <asm/page.h>
@@ -29,6 +30,7 @@
 #include <plat/mvsdio.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -54,6 +56,13 @@ void __init kirkwood_map_io(void)
 	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
 }
 
+/*
+ * Default clock control bits.  Any bit _not_ set in this variable
+ * will be cleared from the hardware after platform devices have been
+ * registered.  Some reserved bits must be set to 1.
+ */
+unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+	
 
 /*****************************************************************************
  * EHCI
@@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = {
 
 void __init kirkwood_ehci_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_USB0;
 	platform_device_register(&kirkwood_ehci);
 }
 
@@ -151,6 +161,7 @@ static struct platform_device kirkwood_ge00 = {
 
 void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	kirkwood_clk_ctrl |= CGC_GE0;
 	eth_data->shared = &kirkwood_ge00_shared;
 	kirkwood_ge00.dev.platform_data = eth_data;
 
@@ -212,6 +223,7 @@ static struct platform_device kirkwood_ge01 = {
 
 void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	kirkwood_clk_ctrl |= CGC_GE1;
 	eth_data->shared = &kirkwood_ge01_shared;
 	kirkwood_ge01.dev.platform_data = eth_data;
 
@@ -258,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
 
 
 /*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+				KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_nand_data,
+	},
+	.resource	= &kirkwood_nand_resource,
+	.num_resources	= 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+			       int chip_delay)
+{
+	kirkwood_clk_ctrl |= CGC_RUNIT;
+	kirkwood_nand_data.parts = parts;
+	kirkwood_nand_data.nr_parts = nr_parts;
+	kirkwood_nand_data.chip_delay = chip_delay;
+	platform_device_register(&kirkwood_nand_flash);
+}
+
+
+/*****************************************************************************
  * SoC RTC
  ****************************************************************************/
 static struct resource kirkwood_rtc_resource = {
@@ -301,6 +350,9 @@ static struct platform_device kirkwood_sata = {
 
 void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 {
+	kirkwood_clk_ctrl |= CGC_SATA0;
+	if (sata_data->n_ports > 1)
+		kirkwood_clk_ctrl |= CGC_SATA1;
 	sata_data->dram = &kirkwood_mbus_dram_info;
 	kirkwood_sata.dev.platform_data = sata_data;
 	platform_device_register(&kirkwood_sata);
@@ -346,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 	else
 		mvsdio_data->clock = 200000000;
 	mvsdio_data->dram = &kirkwood_mbus_dram_info;
+	kirkwood_clk_ctrl |= CGC_SDIO;
 	kirkwood_sdio.dev.platform_data = mvsdio_data;
 	platform_device_register(&kirkwood_sdio);
 }
@@ -377,6 +430,7 @@ static struct platform_device kirkwood_spi = {
 
 void __init kirkwood_spi_init()
 {
+	kirkwood_clk_ctrl |= CGC_RUNIT;
 	platform_device_register(&kirkwood_spi);
 }
 
@@ -507,6 +561,43 @@ void __init kirkwood_uart1_init(void)
 
 
 /*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+
+static struct resource kirkwood_crypto_res[] = {
+	{
+		.name   = "regs",
+		.start  = CRYPTO_PHYS_BASE,
+		.end    = CRYPTO_PHYS_BASE + 0xffff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "sram",
+		.start  = KIRKWOOD_SRAM_PHYS_BASE,
+		.end    = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "crypto interrupt",
+		.start  = IRQ_KIRKWOOD_CRYPTO,
+		.end    = IRQ_KIRKWOOD_CRYPTO,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_crypto_device = {
+	.name           = "mv_crypto",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(kirkwood_crypto_res),
+	.resource       = kirkwood_crypto_res,
+};
+
+void __init kirkwood_crypto_init(void)
+{
+	kirkwood_clk_ctrl |= CGC_CRYPTO;
+	platform_device_register(&kirkwood_crypto_device);
+}
+
+
+/*****************************************************************************
  * XOR
  ****************************************************************************/
 static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
@@ -597,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = {
 
 static void __init kirkwood_xor0_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_XOR0;
 	platform_device_register(&kirkwood_xor0_shared);
 
 	/*
@@ -695,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = {
 
 static void __init kirkwood_xor1_init(void)
 {
+	kirkwood_clk_ctrl |= CGC_XOR1;
 	platform_device_register(&kirkwood_xor1_shared);
 
 	/*
@@ -713,6 +806,29 @@ static void __init kirkwood_xor1_init(void)
 
 
 /*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct orion_wdt_platform_data kirkwood_wdt_data = {
+	.tclk		= 0,
+};
+
+static struct platform_device kirkwood_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kirkwood_wdt_data,
+	},
+	.num_resources	= 0,
+};
+
+static void __init kirkwood_wdt_init(void)
+{
+	kirkwood_wdt_data.tclk = kirkwood_tclk;
+	platform_device_register(&kirkwood_wdt_device);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 int kirkwood_tclk;
@@ -804,6 +920,49 @@ void __init kirkwood_init(void)
 
 	/* internal devices that every board has */
 	kirkwood_rtc_init();
+	kirkwood_wdt_init();
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
+	kirkwood_crypto_init();
+}
+
+static int __init kirkwood_clock_gate(void)
+{
+	unsigned int curr = readl(CLOCK_GATING_CTRL);
+
+	printk(KERN_DEBUG "Gating clock of unused units\n");
+	printk(KERN_DEBUG "before: 0x%08x\n", curr);
+
+	/* Make sure those units are accessible */
+	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+
+	/* For SATA: first shutdown the phy */
+	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
+		/* Disable PLL and IVREF */
+		writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+		/* Disable PHY */
+		writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+	}
+	if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
+		/* Disable PLL and IVREF */
+		writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+		/* Disable PHY */
+		writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+	}
+	
+	/* For PCIe: first shutdown the phy */
+	if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
+		writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+		while (1)
+			if (readl(PCIE_STATUS) & 0x1)
+				break;
+		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+	}
+
+	/* Now gate clock the required units */
+	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
+	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
+
+	return 0;
 }
+late_initcall(kirkwood_clock_gate);
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 6ee88406f38..d7de4346435 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -15,6 +15,7 @@ struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 struct mvsdio_platform_data;
+struct mtd_partition;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -25,7 +26,6 @@ void kirkwood_init_irq(void);
 
 extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
 void kirkwood_setup_cpu_mbus(void);
-void kirkwood_setup_sram_win(u32 base, u32 size);
 
 void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
@@ -40,9 +40,11 @@ void kirkwood_spi_init(void);
 void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
+void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
 
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
new file mode 100644
index 00000000000..f68d33f1f39
--- /dev/null
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and DDR self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/kirkwood.h>
+
+#define KIRKWOOD_MAX_STATES	2
+
+static struct cpuidle_driver kirkwood_idle_driver = {
+	.name =         "kirkwood_idle",
+	.owner =        THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
+/* Actual code that puts the SoC in different idle states */
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct timeval before, after;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+	if (state == &dev->states[0])
+		/* Wait for interrupt state */
+		cpu_do_idle();
+	else if (state == &dev->states[1]) {
+		/*
+		 * Following write will put DDR in self refresh.
+		 * Note that we have 256 cycles before DDR puts it
+		 * self in self-refresh, so the wait-for-interrupt
+		 * call afterwards won't get the DDR from self refresh
+		 * mode.
+		 */
+		writel(0x7, DDR_OPERATION_BASE);
+		cpu_do_idle();
+	}
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int kirkwood_init_cpuidle(void)
+{
+	struct cpuidle_device *device;
+
+	cpuidle_register_driver(&kirkwood_idle_driver);
+
+	device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
+	device->state_count = KIRKWOOD_MAX_STATES;
+
+	/* Wait for interrupt state */
+	device->states[0].enter = kirkwood_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and DDR self refresh state */
+	device->states[1].enter = kirkwood_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "DDR SR");
+	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+
+	if (cpuidle_register_device(device)) {
+		printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+device_initcall(kirkwood_init_cpuidle);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 5505d583775..39bdf4bcace 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -11,14 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <plat/orion_nand.h>
 #include <plat/mvsdio.h>
 #include "common.h"
 #include "mpp.h"
@@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = {
 	},
 };
 
-static struct resource db88f6281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data db88f6281_nand_data = {
-	.parts		= db88f6281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f6281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device db88f6281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f6281_nand_data,
-	},
-	.resource	= &db88f6281_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
@@ -92,13 +64,12 @@ static void __init db88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(db88f6281_mpp_config);
 
+	kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&db88f6281_ge00_data);
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
 	kirkwood_sdio_init(&db88f6281_mvsdio_data);
-	
-	platform_device_register(&db88f6281_nand_flash);
 }
 
 static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 4f7029f521c..9e80d9232c8 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -17,12 +17,15 @@
 #define CPU_RESET		0x00000002
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define WDT_INT_REQ		0x0008
+
 #define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
 #define BRIDGE_INT_TIMER0	0x0002
 #define BRIDGE_INT_TIMER1	0x0004
@@ -39,4 +42,22 @@
 #define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
 #define L2_WRITETHROUGH		0x00000010
 
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_GE0			(1 << 0)
+#define CGC_PEX0		(1 << 2)
+#define CGC_USB0		(1 << 3)
+#define CGC_SDIO		(1 << 4)
+#define CGC_TSU			(1 << 5)
+#define CGC_DUNIT		(1 << 6)
+#define CGC_RUNIT		(1 << 7)
+#define CGC_XOR0		(1 << 8)
+#define CGC_AUDIO		(1 << 9)
+#define CGC_SATA0		(1 << 14)
+#define CGC_SATA1		(1 << 15)
+#define CGC_XOR1		(1 << 16)
+#define CGC_CRYPTO		(1 << 17)
+#define CGC_GE1			(1 << 19)
+#define CGC_TDM			(1 << 20)
+#define CGC_RESERVED		((1 << 18) | (0x6 << 21))
+
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index be07be0ef52..a643a846d5f 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr)
 					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+	void __iomem *retval;
+	unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
+	if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
+	    size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
+		retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
+	} else {
+		retval = __arm_ioremap(paddr, size, mtype);
+	}
+
+	return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+	if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
+#define __arch_iounmap(a)	__arch_iounmap(a)
 #define __io(a)			__io(a)
 #define __mem_pci(a)		(a)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index b3e13958821..07af858814a 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -20,16 +20,18 @@
  * f1000000	on-chip peripheral registers
  * f2000000	PCIe I/O space
  * f3000000	NAND controller address window
+ * f4000000	Security Accelerator SRAM
  *
  * virt		phys		size
  * fee00000	f1000000	1M	on-chip peripheral registers
  * fef00000	f2000000	1M	PCIe I/O space
  */
 
+#define KIRKWOOD_SRAM_PHYS_BASE		0xf4000000
+#define KIRKWOOD_SRAM_SIZE		SZ_2K
+
 #define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
-						* is the minimal window size
-						*/
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
 #define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
@@ -48,6 +50,7 @@
  */
 #define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
 #define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
+#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
 
 #define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
 #define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
@@ -63,7 +66,11 @@
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
 
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
@@ -80,6 +87,11 @@
 #define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
 
 #define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 63c44934391..a5900f64e38 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 	if (!variant_mask)
 		return;
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	printk(KERN_DEBUG "initial MPP regs:");
 	for (i = 0; i < MPP_NR_REGS; i++) {
 		mpp_ctrl[i] = readl(MPP_CTRL(i));
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
new file mode 100644
index 00000000000..0358f45766c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+	.type		= "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 47,
+		.desc		= "SWR Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_F1,
+		.gpio		= 46,
+		.desc		= "WPS Button(F1)",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+	.buttons	= mv88f6281gtw_ge_button_pins,
+	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mv88f6281gtw_ge_button_data,
+	},
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+	{
+		.name		= "gtw:green:Status",
+		.gpio		= 20,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:red:Status",
+		.gpio		= 21,
+		.active_low	= 0,
+	}, {
+		.name		= "gtw:green:USB",
+		.gpio		= 12,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+	.leds		= mv88f6281gtw_ge_led_pins,
+	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mv88f6281gtw_ge_led_data,
+	},
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+	MPP12_GPO,	/* Status#_USB pin  */
+	MPP20_GPIO,	/* Status#_GLED pin */
+	MPP21_GPIO,	/* Status#_RLED pin */
+	MPP46_GPIO,	/* WPS_Switch pin   */
+	MPP47_GPIO,	/* SW_Init pin      */
+	0
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_uart0_init();
+	platform_device_register(&mv88f6281gtw_ge_leds);
+	platform_device_register(&mv88f6281gtw_ge_buttons);
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+	if (machine_is_mv88f6281gtw_ge())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= mv88f6281gtw_ge_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 73fccacd1a7..d90b9aae308 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -14,6 +14,7 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
+#include <mach/bridge-regs.h>
 #include "common.h"
 
 
@@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = {
 static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
+	extern unsigned int kirkwood_clk_ctrl;
 
 	/*
 	 * Generic PCIe unit setup.
@@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	sys->resource[2] = NULL;
 	sys->io_offset = 0;
 
+	kirkwood_clk_ctrl |= CGC_PEX0;
+
 	return 1;
 }
 
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 2f0e4ef3db0..8bf4153d084 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -11,8 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/flash.h>
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 31e996d65fc..31708ddbc83 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
@@ -22,7 +21,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = {
 	},
 };
 
-static struct resource rd88f6281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data rd88f6281_nand_data = {
-	.parts		= rd88f6281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(rd88f6281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device rd88f6281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &rd88f6281_nand_data,
-	},
-	.resource	= &rd88f6281_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_NONE,
 	.speed		= SPEED_1000,
@@ -114,6 +86,7 @@ static void __init rd88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(rd88f6281_mpp_config);
 
+	kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
@@ -129,8 +102,6 @@ static void __init rd88f6281_init(void)
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
 	kirkwood_uart0_init();
-
-	platform_device_register(&rd88f6281_nand_flash);
 }
 
 static int __init rd88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 831e4a56cae..c7319eeac8b 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -20,7 +19,6 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = {
 	},
 };
 
-static struct resource sheevaplug_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-			  KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data sheevaplug_nand_data = {
-	.parts		= sheevaplug_nand_parts,
-	.nr_parts	= ARRAY_SIZE(sheevaplug_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-	.chip_delay	= 25,
-};
-
-static struct platform_device sheevaplug_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &sheevaplug_nand_data,
-	},
-	.resource	= &sheevaplug_nand_resource,
-	.num_resources	= 1,
-};
-
 static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
-	// unfortunately the CD signal has not been connected */
+	/* unfortunately the CD signal has not been connected */
 };
 
 static struct gpio_led sheevaplug_led_pins[] = {
@@ -111,6 +83,7 @@ static void __init sheevaplug_init(void)
 	kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
 
 	if (gpio_request(29, "USB Power Enable") != 0 ||
 	    gpio_direction_output(29, 1) != 0)
@@ -120,7 +93,6 @@ static void __init sheevaplug_init(void)
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
 	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
-	platform_device_register(&sheevaplug_nand_flash);
 	platform_device_register(&sheevaplug_leds);
 }
 
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index e83e45ebf7a..16295cfd5e2 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -52,6 +52,7 @@
 /*
  * Interrupt numbers for PXA910
  */
+#define IRQ_PXA910_NONE			(-1)
 #define IRQ_PXA910_AIRQ			0
 #define IRQ_PXA910_SSP3			1
 #define IRQ_PXA910_SSP2			2
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 2e914649b9e..3b216bf41e7 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -253,6 +253,10 @@
 #define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
 #define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
 
+/* I2C */
+#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
+#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
+
 /* I2S */
 #define GPIO113_I2S_MCLK	MFP_CFG(GPIO113,AF6)
 #define GPIO114_I2S_FRM		MFP_CFG(GPIO114,AF1)
@@ -260,4 +264,27 @@
 #define GPIO116_I2S_RXD		MFP_CFG(GPIO116,AF2)
 #define GPIO117_I2S_TXD		MFP_CFG(GPIO117,AF2)
 
+/* PWM */
+#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
+#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
+#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
+#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
+#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
+#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
+#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
+#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
+#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
+#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
+#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
+#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
+#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
+#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
+#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
+#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
+#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
+#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
+#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
+#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
+#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index d97de36c50a..bf1189ff9a3 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -159,4 +159,12 @@
 #define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
 #define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
+/* PWM */
+#define GPIO27 PWM3 AF2		MFP_CFG(GPIO27, AF2)
+#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
+#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
+#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
+#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
+#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
+
 #endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index ef0a8a2076e..6bf1f0eefcd 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,10 +1,18 @@
 #ifndef __ASM_MACH_PXA168_H
 #define __ASM_MACH_PXA168_H
 
+#include <linux/i2c.h>
 #include <mach/devices.h>
+#include <plat/i2c.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_twsi0;
+extern struct pxa_device_desc pxa168_device_twsi1;
+extern struct pxa_device_desc pxa168_device_pwm1;
+extern struct pxa_device_desc pxa168_device_pwm2;
+extern struct pxa_device_desc pxa168_device_pwm3;
+extern struct pxa_device_desc pxa168_device_pwm4;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -20,4 +28,40 @@ static inline int pxa168_add_uart(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &pxa168_device_twsi0; break;
+	case 1: d = &pxa168_device_twsi1; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa168_add_pwm(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_pwm1; break;
+	case 2: d = &pxa168_device_pwm2; break;
+	case 3: d = &pxa168_device_pwm3; break;
+	case 4: d = &pxa168_device_pwm4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index b7aeaf574c3..6ae1ed7a0a9 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,10 +1,18 @@
 #ifndef __ASM_MACH_PXA910_H
 #define __ASM_MACH_PXA910_H
 
+#include <linux/i2c.h>
 #include <mach/devices.h>
+#include <plat/i2c.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
+extern struct pxa_device_desc pxa910_device_twsi0;
+extern struct pxa_device_desc pxa910_device_twsi1;
+extern struct pxa_device_desc pxa910_device_pwm1;
+extern struct pxa_device_desc pxa910_device_pwm2;
+extern struct pxa_device_desc pxa910_device_pwm3;
+extern struct pxa_device_desc pxa910_device_pwm4;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -20,4 +28,40 @@ static inline int pxa910_add_uart(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 0: d = &pxa910_device_twsi0; break;
+	case 1: d = &pxa910_device_twsi1; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa910_add_pwm(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa910_device_pwm1; break;
+	case 2: d = &pxa910_device_pwm2; break;
+	case 3: d = &pxa910_device_pwm3; break;
+	case 4: d = &pxa910_device_pwm4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
 #endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index c6b8c9dc202..98ccbee4bd0 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -22,8 +22,10 @@
 #define APBC_PXA168_UART1	APBC_REG(0x000)
 #define APBC_PXA168_UART2	APBC_REG(0x004)
 #define APBC_PXA168_GPIO	APBC_REG(0x008)
-#define APBC_PXA168_PWM0	APBC_REG(0x00c)
-#define APBC_PXA168_PWM1	APBC_REG(0x010)
+#define APBC_PXA168_PWM1	APBC_REG(0x00c)
+#define APBC_PXA168_PWM2	APBC_REG(0x010)
+#define APBC_PXA168_PWM3	APBC_REG(0x014)
+#define APBC_PXA168_PWM4	APBC_REG(0x018)
 #define APBC_PXA168_SSP1	APBC_REG(0x01c)
 #define APBC_PXA168_SSP2	APBC_REG(0x020)
 #define APBC_PXA168_RTC		APBC_REG(0x028)
@@ -48,10 +50,10 @@
 #define APBC_PXA910_UART0	APBC_REG(0x000)
 #define APBC_PXA910_UART1	APBC_REG(0x004)
 #define APBC_PXA910_GPIO	APBC_REG(0x008)
-#define APBC_PXA910_PWM0	APBC_REG(0x00c)
-#define APBC_PXA910_PWM1	APBC_REG(0x010)
-#define APBC_PXA910_PWM2	APBC_REG(0x014)
-#define APBC_PXA910_PWM3	APBC_REG(0x018)
+#define APBC_PXA910_PWM1	APBC_REG(0x00c)
+#define APBC_PXA910_PWM2	APBC_REG(0x010)
+#define APBC_PXA910_PWM3	APBC_REG(0x014)
+#define APBC_PXA910_PWM4	APBC_REG(0x018)
 #define APBC_PXA910_SSP1	APBC_REG(0x01c)
 #define APBC_PXA910_SSP2	APBC_REG(0x020)
 #define APBC_PXA910_IPC		APBC_REG(0x024)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ae924468658..71b1ae33875 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -65,11 +65,23 @@ void __init pxa168_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
 static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -109,3 +121,9 @@ struct sys_timer pxa168_timer = {
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 453f8f7758b..5882ca6b49f 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -103,11 +103,23 @@ void __init pxa910_init_irq(void)
 /* APB peripheral clocks */
 static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
 static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -156,3 +168,9 @@ struct sys_timer pxa910_timer = {
  */
 PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
 PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
+PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index f289b0ea7dc..22b4ff893b3 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void)
 {
 	int i;
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
 	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 0dec6f300ff..7622c9b38c9 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -26,6 +26,7 @@
 
 #include <asm/mach/map.h>
 
+#include <mach/common.h>
 #include <mach/hardware.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
@@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = {
 	}
 };
 
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX1);
+
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e54057fb855..e5b0c0a83c3 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -12,77 +12,56 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include <mach/irqs.h>
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
 #include <mach/i2c.h>
+#include <mach/imx-uart.h>
 #include <mach/iomux.h>
+#include <mach/irqs.h>
+
 #include "devices.h"
 
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+	/* UART1 */
 	PC9_PF_UART1_CTS,
 	PC10_PF_UART1_RTS,
 	PC11_PF_UART1_TXD,
 	PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = {
+	/* UART2 */
 	PB28_PF_UART2_CTS,
 	PB29_PF_UART2_RTS,
 	PB30_PF_UART2_TXD,
 	PB31_PF_UART2_RXD,
+	/* I2C */
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+	/* SPI */
+	PC13_PF_SPI1_SPI_RDY,
+	PC14_PF_SPI1_SCLK,
+	PC15_PF_SPI1_SS,
+	PC16_PF_SPI1_MISO,
+	PC17_PF_SPI1_MOSI,
 };
 
-static int uart2_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
-}
+/*
+ * UARTs platform data
+ */
 
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart1_mxc_init,
-		.exit = uart1_mxc_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart2_mxc_init,
-		.exit = uart2_mxc_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
@@ -111,24 +90,6 @@ static struct platform_device flash_device = {
 /*
  * I2C
  */
-
-static int i2c_pins[] = {
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
-	return mxc_gpio_setup_multiple_pins(i2c_pins,
-			ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
-	mxc_gpio_release_multiple_pins(i2c_pins,
-			ARRAY_SIZE(i2c_pins));
-}
-
 static struct pcf857x_platform_data pcf857x_data[] = {
 	{
 		.gpio_base = 4 * 32,
@@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = {
 
 static struct imxi2c_platform_data mx1ads_i2c_data = {
 	.bitrate = 100000,
-	.init = i2c_init,
-	.exit = i2c_exit,
 };
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
@@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
  */
 static void __init mx1ads_init(void)
 {
+	mxc_gpio_setup_multiple_pins(mx1ads_pins,
+		ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
 	/* UART */
 	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
 	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
@@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
@@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 0e71f3fa28b..20e0b5bcdff 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.phys_io	= 0x00200000,
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
-	.map_io		= mxc_map_io,
+	.map_io		= mx1_map_io,
 	.init_irq	= mxc_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 42a788842f4..c77da586b71 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -18,6 +18,13 @@ endchoice
 
 comment "MX2 platforms:"
 
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	depends on MACH_MX21
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
 config MACH_MX27ADS
 	bool "MX27ADS platform"
 	depends on MACH_MX27
@@ -46,4 +53,18 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX27LITE
+	bool "LogicPD MX27 LITEKIT platform"
+	depends on MACH_MX27
+	help
+	  Include support for MX27 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 950649a9154..b9b1cca4e9b 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -11,6 +11,10 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
 obj-$(CONFIG_MACH_MX27) += clock_imx27.o
 
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
 obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
+obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index e4b08ca804e..0850fb88ec1 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -48,6 +48,25 @@ static void _clk_disable(struct clk *clk)
 	__raw_writel(reg, clk->enable_reg);
 }
 
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+			unsigned long rate,
+			u32 max_divisor)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > max_divisor)
+		div = max_divisor;
+
+	return parent_rate / div;
+}
+
 static int _clk_spll_enable(struct clk *clk)
 {
 	u32 reg;
@@ -78,19 +97,7 @@ static void _clk_spll_disable(struct clk *clk)
 static unsigned long _clk_perclkx_round_rate(struct clk *clk,
 					     unsigned long rate)
 {
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 64)
-		div = 64;
-
-	return parent_rate / div;
+	return _clk_generic_round_rate(clk, rate, 64);
 }
 
 static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
@@ -130,6 +137,32 @@ static unsigned long _clk_usb_recalc(struct clk *clk)
 	return parent_rate / (usb_pdf + 1U);
 }
 
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = CSCR() & ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
 static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
 {
 	unsigned long parent_rate;
@@ -595,11 +628,14 @@ static struct clk csi_clk[] = {
 static struct clk usb_clk[] = {
 	{
 		.parent = &spll_clk,
+		.secondary = &usb_clk[1],
 		.get_rate = _clk_usb_recalc,
 		.enable = _clk_enable,
 		.enable_reg = CCM_PCCR_USBOTG_REG,
 		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
 		.disable = _clk_disable,
+		.round_rate = _clk_usb_round_rate,
+		.set_rate = _clk_usb_set_rate,
 	}, {
 		.parent = &hclk_clk,
 		.enable = _clk_enable,
@@ -768,18 +804,7 @@ static struct clk rtc_clk = {
 
 static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
 {
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		div = 8;
-
-	return parent_rate / div;
+	return _clk_generic_round_rate(clk, rate, 8);
 }
 
 static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
@@ -921,7 +946,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
-	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bd51dd04948..169372f69d8 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX21);
+
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+
+void __init mx27_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX27);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
new file mode 100644
index 00000000000..a5ee461cb40
--- /dev/null
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -0,0 +1,286 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+	/* CS8900A */
+	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+
+	/* UART3 (IrDA) - only TXD and RXD */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+
+	/* LCDC */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA24_PF_REV,     /* Sharp panel dedicated signal */
+	PA25_PF_CLS,     /* Sharp panel dedicated signal */
+	PA26_PF_PS,      /* Sharp panel dedicated signal */
+	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+
+	/* MMC/SDHC */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+
+	/* NFC */
+	PF0_PF_NRFB,
+	PF1_PF_NFCE,
+	PF2_PF_NFWP,
+	PF3_PF_NFCLE,
+	PF4_PF_NFALE,
+	PF5_PF_NFRE,
+	PF6_PF_NFWE,
+	PF7_PF_NFIO0,
+	PF8_PF_NFIO1,
+	PF9_PF_NFIO2,
+	PF10_PF_NFIO3,
+	PF11_PF_NFIO4,
+	PF12_PF_NFIO5,
+	PF13_PF_NFIO6,
+	PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+	.width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+	.start = CS0_BASE_ADDR,
+	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx21ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp |= MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+	return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp &= ~MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+	.pixclock       = 188679, /* in ps */
+	.xres           = 240,
+	.yres           = 320,
+
+	.bpp            = 16,
+	.hsync_len      = 2,
+	.left_margin    = 6,
+	.right_margin   = 16,
+
+	.vsync_len      = 1,
+	.upper_margin   = 8,
+	.lower_margin   = 10,
+	.fixed_screen_cpu = 0,
+
+	.pcr            = 0xFB108BC7,
+	.pwmr           = 0x00A901ff,
+	.lscr1          = 0x00120300,
+	.dmacr          = 0x00020008,
+
+	.init = mx21ads_fb_init,
+	.exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+	void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOD(25), detect_irq,
+		IRQF_TRIGGER_FALLING, "mmc-detect", data);
+	if (ret)
+		goto out;
+	return 0;
+out:
+	return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+	.get_ro = mx21ads_sdhc_get_ro,
+	.init = mx21ads_sdhc_init,
+	.exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+	/*
+	 * Memory-mapped I/O on MX21ADS Base board:
+	 *   - CS8900A Ethernet controller
+	 *   - ST16C2552CJ UART
+	 *   - CPU and Base board version
+	 *   - Base board I/O register
+	 */
+	{
+		.virtual = MX21ADS_MMIO_BASE_ADDR,
+		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.length = MX21ADS_MMIO_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx21ads_map_io(void)
+{
+	mx21_map_io();
+	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+			"mx21ads");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata);
+	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+	mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+	mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+	.init	= mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx21ads_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx21ads_board_init,
+	.timer          = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4a3b097adc1..02daddac699 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,6 +23,8 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,9 +35,117 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux.h>
 #include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int mx27ads_pins[] = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
 	.width = 2,
@@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = {
 	.resource = &mx27ads_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+	.bitrate = 100000,
 };
 
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins));
-	return 0;
-}
-
-static int mxc_uart1_pins[] = {
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
 };
 
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+	if (on)
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+	else
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = {
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.pixclock	= 188679,
+	.xres		= 240,
+	.yres		= 320,
+
+	.bpp		= 16,
+	.hsync_len	= 1,
+	.left_margin	= 9,
+	.right_margin	= 16,
+
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+	.fixed_screen_cpu = 0,
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pcr		= 0xFB008BC0,
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.lcd_power	= lcd_power,
 };
 
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
+	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc1-card-detect", data);
 }
 
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
 {
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
+	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc2-card-detect", data);
 }
 
-static int mxc_uart3_pins[] = {
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD
-};
-
-static int uart_mxc_port3_init(struct platform_device *pdev)
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins), "UART3");
+	free_irq(IRQ_GPIOE(21), data);
 }
 
-static int uart_mxc_port3_exit(struct platform_device *pdev)
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
 {
-	mxc_gpio_release_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins));
-	return 0;
+	free_irq(IRQ_GPIOB(7), data);
 }
 
-static int mxc_uart4_pins[] = {
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27ads_sdhc1_init,
+	.exit = mx27ads_sdhc1_exit,
 };
 
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins));
-	return 0;
-}
-
-static int mxc_uart5_pins[] = {
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.init = mx27ads_sdhc2_init,
+	.exit = mx27ads_sdhc2_exit,
 };
 
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins));
-	return 0;
-}
-
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
 	&mxc_fec_device,
+	&mxc_w1_master_device,
 };
 
-static int mxc_fec_pins[] = {
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart_mxc_port0_init,
-		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port1_init,
-		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port2_init,
-		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port3_init,
-		.exit = uart_mxc_port3_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port4_init,
-		.exit = uart_mxc_port4_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port5_init,
-		.exit = uart_mxc_port5_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
 static void __init mx27ads_board_init(void)
 {
-	gpio_fec_active();
+	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+			"mx27ads");
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
@@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void)
 	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
 	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, mx27ads_i2c_devices,
+				ARRAY_SIZE(mx27ads_i2c_devices));
+	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
 
 static void __init mx27ads_map_io(void)
 {
-	mxc_map_io();
+	mx27_map_io();
 	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
new file mode 100644
index 00000000000..3ae11cb8c04
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+		"imx27lite");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+	.init	= mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27lite_init,
+	.timer          = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
new file mode 100644
index 00000000000..1d9238c7a6c
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+		"mx27pdk");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+	.init	= mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mx27pdk_init,
+	.timer          = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index aa4eaa61d1b..a4628d00434 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -17,28 +17,84 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
 #include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
 #include <mach/mxc_nand.h>
 
 #include "devices.h"
 
+static int pcm038_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD27_PF_CSPI1_SS1,
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* SSI4 */
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD,
+	PC18_PF_SSI4_TXD,
+	PC19_PF_SSI4_CLK,
+};
+
 /*
  * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
  * 16 bit width
@@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = {
 	.resource = &pcm038_flash_resource,
 };
 
-static int mxc_uart0_pins[] = {
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins));
-	return 0;
-}
-
-static int mxc_uart1_pins[] = {
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
-				PE9_PF_UART3_RXD,
-				PE10_PF_UART3_CTS,
-				PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins));
-	return 0;
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
-		.init = uart_mxc_port0_init,
-		.exit = uart_mxc_port0_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port1_init,
-		.exit = uart_mxc_port1_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
-		.init = uart_mxc_port2_init,
-		.exit = uart_mxc_port2_exit,
 		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
-static int mxc_fec_pins[] = {
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
 static struct mxc_nand_platform_data pcm038_nand_board_info = {
 	.width = 1,
 	.hw_ecc = 1,
@@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void)
 	__raw_writel(0x22220a00, CSCR_A(1));
 }
 
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
-			"I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
-	mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
 	.bitrate = 100000,
-	.init = pcm038_i2c_1_init,
-	.exit = pcm038_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 		.type = "lm75"
 	}
 };
-#endif
 
 static void __init pcm038_init(void)
 {
-	gpio_fec_active();
+	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+			"PCM038");
+
 	pcm038_init_sram();
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
@@ -267,13 +214,11 @@ static void __init pcm038_init(void)
 	mxc_gpio_mode(PE16_AF_OWIRE);
 	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
-#ifdef CONFIG_I2C_IMX
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
@@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.phys_io        = AIPI_BASE_ADDR,
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx27_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index bf4e520bc1b..6a3acaf57dd 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -16,71 +16,107 @@
  * MA 02110-1301, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
 #include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+	/* SDHC */
 	PB4_PF_SD2_D0,
 	PB5_PF_SD2_D1,
 	PB6_PF_SD2_D2,
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/*
+	 * it seems the data line misses a pullup, so we must enable
+	 * the internal pullup as a local workaround
+	 */
+	PD17_PF_I2C_DATA | GPIO_PUEN,
+	PD18_PF_I2C_CLK,
+	/* Camera */
+	PB10_PF_CSI_D0,
+	PB11_PF_CSI_D1,
+	PB12_PF_CSI_D2,
+	PB13_PF_CSI_D3,
+	PB14_PF_CSI_D4,
+	PB15_PF_CSI_MCLK,
+	PB16_PF_CSI_PIXCLK,
+	PB17_PF_CSI_D5,
+	PB18_PF_CSI_D6,
+	PB19_PF_CSI_D7,
+	PB20_PF_CSI_VSYNC,
+	PB21_PF_CSI_HSYNC,
 };
 
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_PORTC + 28);
+}
+
 static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
 {
 	int ret;
 
-	ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
-		ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
-	if(ret)
-		return ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+	ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
 				"imx-mmc-detect", data);
 	if (ret)
-		goto out_release_gpio;
-
-	set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+		return ret;
 
 	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-	if (ret)
-		goto out_release_gpio;
+	if (ret) {
+		free_irq(IRQ_GPIOC(29), data);
+		return ret;
+	}
 
-	mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
 	gpio_direction_input(GPIO_PORTC + 28);
 
 	return 0;
-
-out_release_gpio:
-	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-			ARRAY_SIZE(pcm970_sdhc2_pins));
-	return ret;
 }
 
 static void pcm970_sdhc2_exit(struct device *dev, void *data)
 {
 	free_irq(IRQ_GPIOC(29), data);
 	gpio_free(GPIO_PORTC + 28);
-	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
-			ARRAY_SIZE(pcm970_sdhc2_pins));
 }
 
 static struct imxmmc_platform_data sdhc_pdata = {
@@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-static int mxc_fb_pins[] = {
-	PA5_PF_LSCLK,	PA6_PF_LD0,	PA7_PF_LD1,	PA8_PF_LD2,
-	PA9_PF_LD3,	PA10_PF_LD4,	PA11_PF_LD5,	PA12_PF_LD6,
-	PA13_PF_LD7,	PA14_PF_LD8,	PA15_PF_LD9,	PA16_PF_LD10,
-	PA17_PF_LD11,	PA18_PF_LD12,	PA19_PF_LD13,	PA20_PF_LD14,
-	PA21_PF_LD15,	PA22_PF_LD16,	PA23_PF_LD17,	PA24_PF_REV,
-	PA25_PF_CLS,	PA26_PF_PS,	PA27_PF_SPL_SPR, PA28_PF_HSYNC,
-	PA29_PF_VSYNC,	PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
-			ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
-	return 0;
-}
-
 /*
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DH06
@@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
-
-	.init = pcm038_fb_init,
-	.exit = pcm038_fb_exit,
 };
 
 /*
@@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = {
  */
 void __init pcm970_baseboard_init(void)
 {
+	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+			"PCM970");
+
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 }
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 194b8428bba..17a21a291e2 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,10 +1,12 @@
 if ARCH_MX3
 
 config ARCH_MX31
+	select ARCH_HAS_RNGA
 	bool
 
 config ARCH_MX35
 	bool
+	select ARCH_MXC_IOMUX_V3
 
 comment "MX3 platforms:"
 
@@ -37,7 +39,6 @@ config MACH_PCM037
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -45,7 +46,6 @@ config MACH_MX31LITE
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -53,17 +53,43 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select ARCH_MX31
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select ARCH_MX31
-	default n
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select ARCH_MX35
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select ARCH_MX31
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select ARCH_MX35
+	default n
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 272c8a953b3..0322696bd11 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -8,9 +8,13 @@ obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o
 obj-$(CONFIG_MACH_QONG)		+= qong.o
+obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
new file mode 100644
index 00000000000..541181090b3
--- /dev/null
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -0,0 +1,295 @@
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static int armadillo5x0_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	/* LAN9118_IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 640x480 @ 60 Hz */
+		.name		= "CRT-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 35,
+		.right_margin	= 115,
+		.upper_margin	= 43,
+		.lower_margin	= 1,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {/* 800x600 @ 56 Hz */
+		.name		= "CRT-SVGA",
+		.refresh	= 56,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 30000,
+		.left_margin	= 30,
+		.right_margin	= 108,
+		.upper_margin	= 13,
+		.lower_margin	= 10,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+				   irq_handler_t detect_irq, void *data)
+{
+	int ret;
+	int gpio_det, gpio_wp;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+	ret = gpio_request(gpio_det, "sdhc-card-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(gpio_det);
+
+	ret = gpio_request(gpio_wp, "sdhc-write-protect");
+	if (ret)
+		goto err_gpio_free;
+
+	gpio_direction_input(gpio_wp);
+
+	/* When supported the trigger type have to be BOTH */
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "sdhc-detect", data);
+
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(gpio_wp);
+
+err_gpio_free:
+	gpio_free(gpio_det);
+
+	return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = armadillo5x0_sdhc1_get_ro,
+	.init = armadillo5x0_sdhc1_init,
+	.exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+	{
+		.start	= CS3_BASE_ADDR,
+		.end	= CS3_BASE_ADDR + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+	.resource       = armadillo5x0_smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&armadillo5x0_smc911x_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* Register UART */
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+	/* Register FB */
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+	.init	= armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+	/* Maintainer: Alberto Panizzo  */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &armadillo5x0_timer,
+	.init_machine	= armadillo5x0_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 3c1e06f56dd..577ee83d1f6 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = {
 	{ .arm = 0, .ahb = 0, .sel = 0},
 };
 
-static struct arm_ahb_div clk_automotive[] = {
-	{ .arm = 1, .ahb = 3, .sel = 0},
-	{ .arm = 1, .ahb = 2, .sel = 1},
-	{ .arm = 2, .ahb = 1, .sel = 1},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 1, .ahb = 6, .sel = 0},
-	{ .arm = 1, .ahb = 4, .sel = 1},
-	{ .arm = 2, .ahb = 2, .sel = 1},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-};
-
 static unsigned long get_rate_arm(void)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
 	unsigned long fref = get_rate_mpll();
 
-	if (pdr0 & 1) {
-		/* consumer path */
-		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-		if (aad->sel)
-			fref = fref * 2 / 3;
-	} else {
-		/* auto path */
-		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
-		if (aad->sel)
-			fref = fref * 3 / 4;
-	}
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+	if (aad->sel)
+		fref = fref * 2 / 3;
+
 	return fref / aad->arm;
 }
 
@@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 	struct arm_ahb_div *aad;
 	unsigned long fref = get_rate_mpll();
 
-	if (pdr0 & 1)
-		/* consumer path */
-		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-	else
-		/* auto path */
-		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
 	return fref / aad->ahb;
 }
@@ -430,7 +407,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
 	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
-	_REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
 	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
 	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
 	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
@@ -462,8 +440,6 @@ int __init mx35_clocks_init()
 	int i;
 	unsigned int ll = 0;
 
-	mxc_set_cpu_type(MXC_CPU_MX35);
-
 #ifdef CONFIG_DEBUG_LL_CONSOLE
 	ll = (3 << 16);
 #endif
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index a68fcf981ed..8b14239724c 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -483,7 +483,7 @@ DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
 DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
 DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
@@ -566,13 +566,18 @@ int __init mx31_clocks_init(unsigned long fref)
 	u32 reg;
 	int i;
 
-	mxc_set_cpu_type(MXC_CPU_MX31);
-
 	ckih_rate = fref;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* change the csi_clk parent if necessary */
+	reg = __raw_readl(MXC_CCM_CCMR);
+	if (!(reg & MXC_CCM_CCMR_CSCS))
+		if (clk_set_parent(&csi_clk, &usb_pll_clk))
+			pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
 	/* Turn off all possible clocks */
 	__raw_writel((3 << 4), MXC_CCM_CGR0);
 	__raw_writel(0, MXC_CCM_CGR1);
@@ -581,6 +586,12 @@ int __init mx31_clocks_init(unsigned long fref)
 					   MX32, but still required to be set */
 		     MXC_CCM_CGR2);
 
+	/*
+	 * Before turning off usb_pll make sure ipg_per_clk is generated
+	 * by ipg_clk and not usb_pll.
+	 */
+	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
 	usb_pll_disable(&usb_pll_clk);
 
 	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 380be0c9b21..d927eddcad4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -17,13 +17,17 @@
  * Boston, MA  02110-1301, USA.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
+#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/common.h>
 #include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
 
 #include "devices.h"
 
@@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = {
 	.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
 	.resource = mxcsdhc1_resources,
 };
+
+static struct resource rnga_resources[] = {
+	{
+		.start = RNGA_BASE_ADDR,
+		.end = RNGA_BASE_ADDR + 0x28,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_rnga_device = {
+	.name = "mxc_rnga",
+	.id = -1,
+	.num_resources = 1,
+	.resource = rnga_resources,
+};
 #endif /* CONFIG_ARCH_MX31 */
 
 /* i.MX31 Image Processing Unit */
@@ -329,10 +348,54 @@ struct platform_device mx3_fb = {
 	.num_resources	= ARRAY_SIZE(fb_resources),
 	.resource	= fb_resources,
 	.dev		= {
-		.coherent_dma_mask = 0xffffffff,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
        },
 };
 
+static struct resource camera_resources[] = {
+	{
+		.start	= IPU_CTRL_BASE_ADDR + 0x60,
+		.end	= IPU_CTRL_BASE_ADDR + 0x87,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mx3_camera = {
+	.name		= "mx3-camera",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(camera_resources),
+	.resource	= camera_resources,
+	.dev		= {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
@@ -359,6 +422,7 @@ static int mx3_devices_init(void)
 	if (cpu_is_mx31()) {
 		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+		mxc_register_device(&mxc_rnga_device, NULL);
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 88c04b296fa..ffd494ddd4a 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -11,6 +11,10 @@ extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_rnga_device;
+
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 40ffc5a664d..c66ccbcdc11 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 EXPORT_SYMBOL(mxc_iomux_set_pad);
 
 /*
- * setups a single pin:
+ * allocs a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
-	unsigned gpio;
 
 	if (pad >= (PIN_MAX + 1)) {
 		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
@@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
 	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
 		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
 			pad, label ? label : "?");
-		return -EINVAL;
+		return -EBUSY;
 	}
 	mxc_iomux_mode(pin);
 
-	/* if we have a gpio, we can allocate it */
-	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-	if (gpio < (GPIO_PORT_MAX + 1) * 32)
-		if (gpio_request(gpio, label))
-			return -EINVAL;
-
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
 int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
 		const char *label)
@@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
 	int ret = -EINVAL;
 
 	for (i = 0; i < count; i++) {
-		if (mxc_iomux_setup_pin(*p, label))
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
 			goto setup_error;
 		p++;
 	}
@@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 void mxc_iomux_release_pin(const unsigned int pin)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
-	unsigned gpio;
 
 	if (pad < (PIN_MAX + 1))
 		clear_bit(pad, mxc_pin_alloc_map);
-
-	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
-	if (gpio < (GPIO_PORT_MAX + 1) * 32)
-		gpio_free(gpio);
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 9e1459cb4b7..1f5fdd456cb 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
 {
+	mxc_set_cpu_type(MXC_CPU_MX31);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index a6d6efefa6a..30e2767a78a 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void)
 	/*
 	 * Configure INT line as GPIO input
 	 */
-	mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
 	/* disable the interrupt and clear the status */
 	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
  */
 static void __init mx31ads_map_io(void)
 {
-	mxc_map_io();
+	mx31_map_io();
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
new file mode 100644
index 00000000000..3b3a78f49c2
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -0,0 +1,216 @@
+/*
+ *  LILLY-1131 development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/mmc.h>
+#include <mach/mx3fb.h>
+#include <mach/ipu.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LILLY-1131 development board. If you design an own baseboard for the
+ * module, use this file as base for support code.
+ */
+
+static unsigned int lilly_db_board_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_CONTRAST__CONTRAST,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC support */
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int gpio_det, gpio_wp;
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	= mxc_mmc1_get_ro,
+	.init	= mxc_mmc1_init,
+	.exit	= mxc_mmc1_exit,
+};
+
+/* Framebuffer support */
+static struct ipu_platform_data ipu_data __initdata = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb = {
+	/* 640x480 TFT panel (IPS-056T) */
+	.name	   	= "CRT-VGA",
+	.refresh	= 64,
+	.xres		= 640,
+	.yres		= 480,
+	.pixclock	= 30000,
+	.left_margin	= 200,
+	.right_margin	= 2,
+	.upper_margin	= 2,
+	.lower_margin	= 2,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+	.vmode		= FB_VMODE_NONINTERLACED,
+	.flag		= 0,
+};
+
+static struct mx3fb_platform_data fb_pdata __initdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= &fb_modedb,
+	.num_modes	= 1,
+};
+
+#define LCD_VCC_EN_GPIO	 (7)
+
+static void __init mx31lilly_init_fb(void)
+{
+	if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
+		printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
+		return;
+	}
+
+	mxc_register_device(&mx3_ipu, &ipu_data);
+	mxc_register_device(&mx3_fb, &fb_pdata);
+	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
+}
+
+void __init mx31lilly_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
+					ARRAY_SIZE(lilly_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mx31lilly_init_fb();
+}
+
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
new file mode 100644
index 00000000000..6ab2f163cb9
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -0,0 +1,155 @@
+/*
+ *  LILLY-1131 module support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+	{
+		.start	= CS4_BASE_ADDR,
+		.end	= CS4_BASE_ADDR + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT |
+			  SMSC911X_SAVE_MAC_ADDRESS |
+			  SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc91x_resources),
+	.resource	= smsc91x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	}
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
+	&mxc_i2c_device1,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+	switch (mx31lilly_baseboard) {
+	case MX31LILLY_NOBOARD:
+		break;
+	case MX31LILLY_DB:
+		mx31lilly_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+			mx31lilly_baseboard);
+	}
+
+	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+	.init	= mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mxc_init_irq,
+	.init_machine	= mx31lilly_board_init,
+	.timer		= &mx31lilly_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 894d98cd994..86fe70fa3e1 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -22,6 +22,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,11 +35,64 @@
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
 
 /*
  * This file contains the board-specific initialization routines.
  */
 
+static unsigned int mx31lite_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* LAN9117 IRQ pin */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= CS4_BASE_ADDR,
+		.end		= CS4_BASE_ADDR + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
  */
 void __init mx31lite_map_io(void)
 {
-	mxc_map_io();
+	mx31_map_io();
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
@@ -68,6 +124,22 @@ void __init mx31lite_map_io(void)
  */
 static void __init mxc_board_init(void)
 {
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+				      "mx31lite");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+	/* SMSC9117 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+		platform_device_register(&smsc911x_device);
+	}
 }
 
 static void __init mx31lite_timer_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index d080b4add79..4704405165a 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,33 +16,142 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int devboard_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int mxc_uart1_pins[] = {
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.get_ro	= devboard_sdhc2_get_ro,
+	.init	= devboard_sdhc2_init,
+	.exit	= devboard_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_devboard_init(void)
 {
 	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-	mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+		"devboard");
+
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 9ef9566823f..641c3d6153a 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,22 +16,144 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int marxbot_pins[] = {
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* CSI */
+	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	MX31_PIN_TXD2__GPIO1_28,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.get_ro	= marxbot_sdhc2_get_ro,
+	.init	= marxbot_sdhc2_init,
+	.exit	= marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
 void __init mx31moboard_marxbot_init(void)
 {
 	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+		"marxbot");
+
+	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	marxbot_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 34c2a1b99d4..a17f2e41160 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,26 +16,47 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
+static unsigned int moboard_pins[] = {
+	/* UART0 */
+	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	/* UART4 */
+	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+	/* I2C0 */
+	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+	/* I2C1 */
+	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
 static struct physmap_flash_data mx31moboard_flash_data = {
 	.width  	= 2,
 };
@@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+	.bitrate = 400000,
 };
 
-static int mxc_uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+	.bitrate = 100000,
 };
-static int mxc_uart4_pins[] = {
-	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC1_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_CD);
+
+	ret = gpio_request(SDHC1_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc1-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC1_WP);
+err_gpio_free:
+	gpio_free(SDHC1_CD);
+
+	return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC1_CD), data);
+	gpio_free(SDHC1_WP);
+	gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.get_ro	= moboard_sdhc1_get_ro,
+	.init	= moboard_sdhc1_init,
+	.exit	= moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31moboard_flash,
 };
 
 static int mx31moboard_baseboard;
@@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
  */
 static void __init mxc_board_init(void)
 {
+	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+		"moboard");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -99,7 +177,8 @@ static void __init mxc_board_init(void)
 		mx31moboard_marxbot_init();
 		break;
 	default:
-		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+			mx31moboard_baseboard);
 	}
 }
 
@@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index bc63f178569..c19838d2e36 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -20,6 +20,9 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -41,21 +44,192 @@
  * @ingroup System
  */
 
+static int mx31pdk_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= LAN9217_BASE_ADDR,
+		.end		= LAN9217_BASE_ADDR + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= EXPIO_INT_ENET,
+		.end		= EXPIO_INT_ENET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
 };
 
-static inline void mxc_init_imx_uart(void)
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
 {
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	uint32_t imr_val;
+	uint32_t int_valid;
+	uint32_t expio_irq;
+
+	imr_val = __raw_readw(CPLD_INT_MASK_REG);
+	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+	expio_irq = MXC_EXP_IO_BASE;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+		generic_handle_irq(expio_irq);
+	}
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* mask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg |= 1 << expio;
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* clear the interrupt status */
+	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	/* mask the interrupt */
+	expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* unmask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+static int __init mx31pdk_init_expio(void)
+{
+	int i;
+	int ret;
+
+	/* Check if there's a debug board connected */
+	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		/* No Debug board found */
+		return -ENODEV;
+	}
+
+	pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+		__raw_readw(CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/* Disable the interrupts and clear the status */
+	__raw_writew(0, CPLD_INT_MASK_REG);
+	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	__raw_writew(0x1F, CPLD_INT_MASK_REG);
+	for (i = MXC_EXP_IO_BASE;
+	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+	     i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+	return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+	{
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED,
+	}, {
+		.virtual = CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
+		.length = CS5_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
 }
 
 /*!
@@ -63,7 +237,13 @@ static inline void mxc_init_imx_uart(void)
  */
 static void __init mxc_board_init(void)
 {
-	mxc_init_imx_uart();
+	mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+				      "mx31pdk");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	if (!mx31pdk_init_expio())
+		platform_device_register(&smsc911x_device);
 }
 
 static void __init mx31pdk_timer_init(void)
@@ -84,7 +264,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31pdk_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
new file mode 100644
index 00000000000..6d15374414b
--- /dev/null
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+	.init	= mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+	/* Maintainer: Freescale Semiconductor, Inc */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx35pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b5227d837b2..c6f61a1f06c 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -28,6 +28,10 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -37,7 +41,9 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #ifdef CONFIG_I2C_IMX
@@ -46,6 +52,76 @@
 
 #include "devices.h"
 
+static unsigned int pcm037_pins[] = {
+	/* I2C */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+	/* SPI1 */
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	/* UART3 */
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	/* LAN9217 irq pin */
+	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+	/* Onewire */
+	MX31_PIN_BATT_LINE__OWIRE,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_D3_REV__D3_REV,
+	MX31_PIN_CONTRAST__CONTRAST,
+	MX31_PIN_D3_SPL__D3_SPL,
+	MX31_PIN_D3_CLS__D3_CLS,
+	MX31_PIN_LCS0__GPI03_23,
+};
+
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
 };
@@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = {
 	.flags	= IORESOURCE_MEM,
 };
 
+static int usbotg_pins[] = {
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+	int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+					ARRAY_SIZE(usbotg_pins), "usbotg");
+
+	if (ret < 0) {
+		printk(KERN_ERR "Cannot set up OTG pins\n");
+		return ret;
+	}
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device pcm037_flash = {
 	.name	= "physmap-flash",
 	.id	= 0,
@@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 };
 
 #ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
-	return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
-			"i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
-	mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
-	.init = pcm037_i2c_1_init,
-	.exit = pcm037_i2c_1_exit,
 };
 
 static struct at24_platform_data board_eeprom = {
@@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 };
 #endif
 
-static int sdhc1_pins[] = {
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-};
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
 {
-	return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
-				"sdhc-1");
+	int ret;
+
+	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+				"sdhc-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+	gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+	gpio_free(SDHC1_GPIO_DET);
+
+	return ret;
 }
 
 static void pcm970_sdhc1_exit(struct device *dev, void *data)
 {
-	mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+	gpio_free(SDHC1_GPIO_DET);
+	gpio_free(SDHC1_GPIO_WP);
 }
 
-/* No card and rw detection at the moment */
 static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+	.get_ro = pcm970_sdhc1_get_ro,
+#endif
 	.init = pcm970_sdhc1_init,
 	.exit = pcm970_sdhc1_exit,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
-	&pcm037_eth,
 	&pcm037_sram_device,
 };
 
-static int uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static int uart2_pins[] = {
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz Sharp */
+		.name		= "Sharp-LQ035Q7DH06-QVGA",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7DH06-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
 /*
@@ -215,21 +392,28 @@ static int uart2_pins[] = {
  */
 static void __init mxc_board_init(void)
 {
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+			"pcm037");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata);
 
-	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
 	/* LAN9217 IRQ pin */
-	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
-				"pcm037-eth"))
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
 		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	}
+
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,
@@ -239,6 +423,10 @@ static void __init mxc_board_init(void)
 #endif
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	if (!gpio_usbotg_hs_activate())
+		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
new file mode 100644
index 00000000000..8d27c324abf
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -0,0 +1,252 @@
+/*
+ *  Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz */
+		.name		= "Sharp-LQ035Q7",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm043_flash_data,
+	},
+	.resource = &pcm043_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+       {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563",
+	}
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+	&pcm043_flash,
+	&mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+	i2c_register_board_info(0, pcm043_i2c_devices,
+			ARRAY_SIZE(pcm043_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+	.init	= pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+	/* Maintainer: Pengutronix */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &pcm043_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 5a01e48fd8f..82b31c4ab11 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mxc_map_io,
+	.map_io         = mx31_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 79df60c20e7..43da8bb4926 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -168,7 +168,7 @@ void __init netx_init_irq(void)
 {
 	int irq;
 
-	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0);
+	vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
 
 	for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
 		set_irq_chip(irq, &netx_hif_chip);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cd8de89c5fa..55ecc01ea20 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -46,7 +46,6 @@ config MACH_OMAP_H2
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-#	select GPIOEXPANDER_OMAP
     	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 1bda8f5d754..6867cd3ad0b 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
+mailbox_mach-objs		:= mailbox.o
+
 led-y := leds.o
 
 # Specific board support
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d1ed1365319..e70fc7c66bb 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,8 +33,11 @@
 #include <mach/common.h>
 #include <mach/dsp_common.h>
 #include <mach/omapfb.h>
+#include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	},
 };
 
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+	.te_connected		= 1,
+};
+
+static void hwa742_dev_init(void)
+{
+	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+	omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
 
 /* assume no Mini-AB port */
 
@@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap_dsp_init();
+	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
 	omap_usb_init(&nokia770_usb_config);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 336e51dc612..436eed22801 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -776,7 +776,7 @@ int __init omap1_clk_init(void)
 	arm_idlect1_mask = ~0;
 
 	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	cpu_mask = 0;
 	if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 9774c1f5311..5218943c91c 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,11 +53,12 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <mach/tc.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/dma.h>
 #include <mach/dmtimer.h>
 
+#include "pm.h"
+
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
@@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
  * going idle we continue to do idle even if we get
  * a clock tick interrupt . .
  */
-void omap_pm_idle(void)
+void omap1_pm_idle(void)
 {
 	extern __u32 arm_idlect1_mask;
 	__u32 use_idlect1 = arm_idlect1_mask;
@@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void)
 #define EN_APICK	6	/* ARM_IDLECT2 */
 #define DSP_EN		1	/* ARM_RSTCT1 */
 
-void omap_pm_suspend(void)
+void omap1_pm_suspend(void)
 {
 	unsigned long arg0 = 0, arg1 = 0;
 
@@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state)
 	{
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
-		omap_pm_suspend();
+		omap1_pm_suspend();
 		break;
 	default:
 		return -EINVAL;
@@ -683,7 +684,7 @@ static int __init omap_pm_init(void)
 		return -ENODEV;
 	}
 
-	pm_idle = omap_pm_idle;
+	pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap730())
 		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h
index ce6ee792753..9ed5e2c1de4 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -1,7 +1,7 @@
 /*
- * arch/arm/plat-omap/include/mach/pm.h
+ * arch/arm/mach-omap1/pm.h
  *
- * Header file for OMAP Power Management Routines
+ * Header file for OMAP1 Power Management Routines
  *
  * Author: MontaVista Software, Inc.
  *	   support@mvista.com
@@ -31,8 +31,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
 
 /*
  * ----------------------------------------------------------------------------
@@ -106,8 +106,7 @@
 
 #if     !defined(CONFIG_ARCH_OMAP730) && \
 	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX) && \
-	!defined(CONFIG_ARCH_OMAP24XX)
+	!defined(CONFIG_ARCH_OMAP16XX)
 #warning "Power management for this processor not implemented yet"
 #endif
 
@@ -115,29 +114,27 @@
 
 #include <linux/clk.h>
 
+extern struct kset power_subsys;
+
 extern void prevent_idle_sleep(void);
 extern void allow_idle_sleep(void);
 
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
-					void __iomem *sdrc_power);
 extern void omap730_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
 
 extern unsigned int omap730_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
 extern unsigned int omap730_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
 
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 extern void omap_serial_wake_trigger(int enable);
@@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable);
 #define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
 #define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
 
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
 /*
  * List of global OMAP registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -283,63 +276,5 @@ enum mpui1610_save_state {
 #endif
 };
 
-enum omap24xx_save_state {
-	OMAP24XX_SLEEP_SAVE_START = 0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
-	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
-	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
-	OMAP24XX_SLEEP_SAVE_SIZE
-};
-
 #endif /* ASSEMBLER */
 #endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 842090b148f..f754cee4f3c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -26,9 +26,6 @@
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/fpga.h>
-#ifdef CONFIG_PM
-#include <mach/pm.h>
-#endif
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f3eac932092..22e8568339b 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -35,7 +35,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
+#include "pm.h"
 
 		.text
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386a65c..a755eb5e236 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,7 @@ config ARCH_OMAP3430
 	select ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
+	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
@@ -56,6 +56,10 @@ config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3EVM
+	bool "OMAP 3530 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+	bool "OMAP3 Zoom2 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+	bool "OMAP 4430 SDP board"
+	depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c49d9bfa3ab..735bae5b0de 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,21 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
-		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
-		clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common				= irq.o sdrc.o
+prcm-common				= prcm.o powerdomain.o
+clock-common				= clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
+# SMP support ONLY available for OMAP4
+obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
@@ -20,14 +29,21 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
-obj-y					+= pm.o
+obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
+iommu-y					+= iommu2.o
+iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
+
+obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
@@ -40,6 +56,8 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
@@ -48,8 +66,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
 obj-y					+= usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
+obj-y					+= $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
+obj-y					+= $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 22143651037..9c3fdcdf76c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
 #define SDP2430_CS0_BASE	0x04000000
-#define	SDP2430_FLASH_CS	0
-#define	SDP2430_SMC91X_CS	5
-
-#define SDP2430_ETHR_GPIO_IRQ		149
+#define SECONDARY_LCD_GPIO		147
 
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct resource sdp2430_smc91x_resources[] = {
-	[0] = {
-		.start	= SDP2430_CS0_BASE,
-		.end	= SDP2430_CS0_BASE + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp2430_smc91x_device = {
-	.name		= "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+	.name		= "sdp2430_lcd",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp2430_smc91x_resources),
-	.resource	= sdp2430_smc91x_resources,
 };
 
 static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_smc91x_device,
 	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
-static inline void __init sdp2430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int rate;
-	struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
 
-	eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 5,
+	.gpio_irq	= 149,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
 
-	clk_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-
-	/* Make sure CS1 timings are correct, for 2430 always muxed */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else { /* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
+};
 
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
 
-	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
 
-	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			SDP2430_ETHR_GPIO_IRQ);
-		gpmc_cs_free(eth_cs);
-		goto out;
-	}
-	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
 
-out:
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
 }
 
+#endif
+
 static void __init omap_2430sdp_init_irq(void)
 {
 	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp2430_init_smc91x();
 }
 
 static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
 
 static struct omap_board_config_kernel sdp2430_config[] = {
 	{OMAP_TAG_UART, &sdp2430_uart_config},
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
 
@@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 
 static void __init omap_2430sdp_init(void)
 {
+	int ret;
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void)
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
+	board_smc91x_init();
+
+	/* Turn off secondary LCD backlight */
+	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+	if (ret == 0)
+		gpio_direction_output(SECONDARY_LCD_GPIO, 0);
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed927497212..496a90e4ea7 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,13 @@
 
 #include <mach/control.h>
 #include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
 
+#include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
-#define SDP3430_SMC91X_CS		3
-
 #define SDP3430_TS_GPIO_IRQ_SDPV1	3
 #define SDP3430_TS_GPIO_IRQ_SDPV2	2
 
@@ -56,24 +54,6 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static struct resource sdp3430_smc91x_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp3430_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),
-	.resource	= sdp3430_smc91x_resources,
-};
-
 static int sdp3430_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
 };
 
 static struct platform_device *sdp3430_devices[] __initdata = {
-	&sdp3430_smc91x_device,
 	&sdp3430_lcd_device,
 };
 
-static inline void __init sdp3430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	int eth_gpio = 0;
-
-	eth_cs = SDP3430_SMC91X_CS;
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
-	else
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
-	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
-	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			eth_gpio);
-		return;
-	}
-	gpio_direction_input(eth_gpio);
-}
-
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp3430_init_smc91x();
 }
 
 static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 3,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init();
+	board_smc91x_init();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
new file mode 100644
index 00000000000..57e477bd89c
--- /dev/null
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+	.name		= "sdp4430_lcd",
+	.id		= -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+	&sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp4430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(1);
+#endif
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+	omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_4430sdp_map_io,
+	.init_irq	= omap_4430sdp_init_irq,
+	.init_machine	= omap_4430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0fcda1..d8bc0a7dcb8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
@@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.rows		= 6,
+	.cols		= 6,
+	.keymap		= ldp_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+	[0] = {
+		.code			= KEY_ENTER,
+		.gpio			= 101,
+		.desc			= "enter sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[1] = {
+		.code			= KEY_F1,
+		.gpio			= 102,
+		.desc			= "func 1",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[2] = {
+		.code			= KEY_F2,
+		.gpio			= 103,
+		.desc			= "func 2",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[3] = {
+		.code			= KEY_F3,
+		.gpio			= 104,
+		.desc			= "func 3",
+		.active_low		= 1,
+		.debounce_interval 	= 30,
+	},
+	[4] = {
+		.code			= KEY_F4,
+		.gpio			= 105,
+		.desc			= "func 4",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[5] = {
+		.code			= KEY_LEFT,
+		.gpio			= 106,
+		.desc			= "left sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[6] = {
+		.code			= KEY_RIGHT,
+		.gpio			= 107,
+		.desc			= "right sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[7] = {
+		.code			= KEY_UP,
+		.gpio			= 108,
+		.desc			= "up sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[8] = {
+		.code			= KEY_DOWN,
+		.gpio			= 109,
+		.desc			= "down sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+	.buttons		= ldp_gpio_keys_buttons,
+	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
+	.rep			= 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ldp_gpio_keys,
+	},
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ts_gpio);
+	omap_set_gpio_debounce(ts_gpio, 1);
+	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+	[0] = {
+		/*
+		 * TSC2046 operates at a max freqency of 2MHz, so
+		 * operate slightly below at 1.5MHz
+		 */
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &tsc2046_mcspi_config,
+		.irq			= 0,
+		.platform_data		= &tsc2046_config,
+	},
 };
 
 static inline void __init ldp_init_smsc911x(void)
@@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct platform_device ldp_lcd_device = {
+	.name		= "ldp_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_UART,	&ldp_uart_config },
+	{ OMAP_TAG_LCD,		&ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
+static struct twl4030_madc_platform_data ldp_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ldp_vmmc1_supply,
+};
+
 static struct twl4030_platform_data ldp_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.madc		= &ldp_madc_data,
+	.usb		= &ldp_usb_data,
+	.vmmc1		= &ldp_vmmc1,
 	.gpio		= &ldp_gpio_data,
+	.keypad		= &ldp_kp_twl4030_data,
 };
 
 static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
+static struct platform_device *ldp_devices[] __initdata = {
+	&ldp_smsc911x_device,
+	&ldp_lcd_device,
+	&ldp_gpio_keys_device,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	ts_gpio = 54;
+	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+	spi_register_board_info(ldp_spi_board_info,
+				ARRAY_SIZE(ldp_spi_board_info));
+	ads7846_dev_init();
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
+
+	twl4030_mmc_init(mmc);
+	/* link regulators to MMC adapters */
+	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d1f9a..991ac9c3803 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 
 #include <mach/hardware.h>
@@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = {
 	.resource	= &omap3beagle_nand_resource,
 };
 
+#include "sdram-micron-mt46h32m32lf-6.h"
+
 static struct omap_uart_config omap3_beagle_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
+static struct platform_device omap3_beagle_lcd_device = {
+	.name		= "omap3beagle_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
 static struct gpio_led gpio_leds[];
 
 static int beagle_twl_gpio_setup(struct device *dev,
@@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
+	/* link regulators to MMC adapters */
+	beagle_vmmc1_supply.dev = mmc[0].dev;
+	beagle_vsim_supply.dev = mmc[0].dev;
+
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
@@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
 	.setup		= beagle_twl_gpio_setup,
 };
 
+static struct regulator_consumer_supply beagle_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &beagle_vdvi_supply,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
 	.gpio		= &beagle_gpio_data,
+	.vmmc1		= &beagle_vmmc1,
+	.vsim		= &beagle_vsim,
+	.vdac		= &beagle_vdac,
+	.vpll2		= &beagle_vpll2,
 };
 
 static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct platform_device omap3_beagle_lcd_device = {
-	.name		= "omap3beagle_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
new file mode 100644
index 00000000000..d3cc145814d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO	175
+
+#define OMAP3EVM_ETHR_START	0x2c000000
+#define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_GPIO_IRQ	176
+#define OMAP3EVM_SMC911X_CS	5
+
+static struct resource omap3evm_smc911x_resources[] = {
+	[0] =	{
+		.start	= OMAP3EVM_ETHR_START,
+		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] =	{
+		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
+	.resource	= &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+	int eth_cs;
+	struct clk *l3ck;
+	unsigned int rate;
+
+	eth_cs = OMAP3EVM_SMC911X_CS;
+
+	l3ck = clk_get(NULL, "l3_ck");
+	if (IS_ERR(l3ck))
+		rate = 100000000;
+	else
+		rate = clk_get_rate(l3ck);
+
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+			OMAP3EVM_ETHR_GPIO_IRQ);
+		return;
+	}
+
+	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 63,
+	},
+	{}	/* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "omap3evm::ledb",
+		/* normally not visible (board underside) */
+		.default_trigger	= "default-on",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_cfg_reg(L8_34XX_GPIO63);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/*
+	 * Most GPIOs are for USB OTG.  Some are mostly sent to
+	 * the P2 connector; notably LEDA for the LCD backlight.
+	 */
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	platform_device_register(&leds_gpio);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+	.rows		= 4,
+	.cols		= 4,
+	.keymap		= omap3evm_keymap,
+	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
+	.rep		= 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &omap3evm_kp_data,
+	.madc		= &omap3evm_madc_data,
+	.usb		= &omap3evm_usb_data,
+	.gpio		= &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3evm_twldata,
+	},
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+			ARRAY_SIZE(omap3evm_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+	.name		= "omap3evm_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+	omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs	= 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+	[0] = {
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+	omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+	&omap3_evm_lcd_device,
+	&omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+	omap3_evm_i2c_init();
+
+	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+	spi_register_board_info(omap3evm_spi_board_info,
+				ARRAY_SIZE(omap3evm_spi_board_info));
+
+	omap_serial_init();
+	usb_musb_init();
+	ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_evm_map_io,
+	.init_irq	= omap3_evm_init_irq,
+	.init_machine	= omap3_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c6cf1..e32aa23ce96 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -23,7 +23,11 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,11 +39,154 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
 
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME		127
+
+static struct gpio_led pandora_gpio_leds[] = {
+	{
+		.name			= "pandora::sd1",
+		.default_trigger	= "mmc0",
+		.gpio			= 128,
+	}, {
+		.name			= "pandora::sd2",
+		.default_trigger	= "mmc1",
+		.gpio			= 129,
+	}, {
+		.name			= "pandora::bluetooth",
+		.gpio			= 158,
+	}, {
+		.name			= "pandora::wifi",
+		.gpio			= 159,
+	},
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+	.leds		= pandora_gpio_leds,
+	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_led_data,
+	},
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
+{								\
+	.gpio		= gpio_num,				\
+	.type		= ev_type,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+	.desc		= "btn " descr,				\
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
+	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
+	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
+	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
+	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
+	GPIO_BUTTON_LOW(111,	BTN_A,		"a"),
+	GPIO_BUTTON_LOW(106,	BTN_B,		"b"),
+	GPIO_BUTTON_LOW(109,	BTN_X,		"x"),
+	GPIO_BUTTON_LOW(101,	BTN_Y,		"y"),
+	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
+	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
+	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
+	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
+	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
+	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
+	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+	.buttons	= pandora_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pandora_gpio_key_info,
+	},
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+	/* set debounce time for GPIO banks 4 and 6 */
+	omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+	/* col, row, code */
+	KEY(0, 0, KEY_9),
+	KEY(0, 1, KEY_0),
+	KEY(0, 2, KEY_BACKSPACE),
+	KEY(0, 3, KEY_O),
+	KEY(0, 4, KEY_P),
+	KEY(0, 5, KEY_K),
+	KEY(0, 6, KEY_L),
+	KEY(0, 7, KEY_ENTER),
+	KEY(1, 0, KEY_8),
+	KEY(1, 1, KEY_7),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_5),
+	KEY(1, 4, KEY_4),
+	KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_2),
+	KEY(1, 7, KEY_1),
+	KEY(2, 0, KEY_I),
+	KEY(2, 1, KEY_U),
+	KEY(2, 2, KEY_Y),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_R),
+	KEY(2, 5, KEY_E),
+	KEY(2, 6, KEY_W),
+	KEY(2, 7, KEY_Q),
+	KEY(3, 0, KEY_J),
+	KEY(3, 1, KEY_H),
+	KEY(3, 2, KEY_G),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_D),
+	KEY(3, 5, KEY_S),
+	KEY(3, 6, KEY_A),
+	KEY(3, 7, KEY_LEFTSHIFT),
+	KEY(4, 0, KEY_N),
+	KEY(4, 1, KEY_B),
+	KEY(4, 2, KEY_V),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_X),
+	KEY(4, 5, KEY_Z),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 7, KEY_COMMA),
+	KEY(5, 0, KEY_M),
+	KEY(5, 1, KEY_SPACE),
+	KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+	.rows		= 8,
+	.cols		= 6,
+	.keymap		= pandora_keypad_map,
+	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
+	.rep		= 1,
+};
+
 static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{
 		.mmc		= 1,
@@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = {
 	.enabled_uarts	= (1 << 2), /* UART3 */
 };
 
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	twl4030_mmc_init(omap3pandora_mmc);
 
+	/* link regulators to MMC adapters */
+	pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+	pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
 	return 0;
 }
 
@@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc2_supply,
+};
+
 static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
 	.usb		= &omap3pandora_usb_data,
+	.vmmc1		= &pandora_vmmc1,
+	.vmmc2		= &pandora_vmmc2,
+	.keypad		= &pandora_kp_data,
 };
 
 static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
 
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
+	&pandora_leds_gpio,
+	&pandora_keys_gpio,
 };
 
 static void __init omap3pandora_init(void)
@@ -201,6 +395,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	pandora_keys_gpio_init();
 	usb_musb_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23bea863..dff5528fbfb 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -45,6 +46,7 @@
 #include <mach/nand.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OVERO_GPIO_BT_XGATE	15
@@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.transceiver	= true,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	twl4030_mmc_init(mmc);
+
+	overo_vmmc1_supply.dev = mmc[0].dev;
+
+	return 0;
+}
+
 static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= overo_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data overo_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
 static struct twl4030_platform_data overo_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
+	.usb		= &overo_usb_data,
+	.vmmc1		= &overo_vmmc1,
 };
 
 static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65950", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &overo_twldata,
@@ -303,7 +360,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-	},
-	{}	/* Terminator */
-};
-
 static void __init overo_init(void)
 {
 	overo_i2c_init();
@@ -350,7 +390,6 @@ static void __init overo_init(void)
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	overo_flash_init();
 	usb_musb_init();
 	overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a7381729645..da93b86234e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,30 +27,13 @@
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
-
-#define SMC91X_CS			1
-#define SMC91X_GPIO_IRQ			54
-#define SMC91X_GPIO_RESET		164
-#define SMC91X_GPIO_PWRDWN		86
-
-static struct resource rx51_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device rx51_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),
-	.resource	= rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3	0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
 
 static int rx51_keymap[] = {
 	KEY(0, 0, KEY_Q),
@@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
 
-static struct platform_device *rx51_peripherals_devices[] = {
-	&rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
-	struct gpmc_timings t;
-	const int t2_r = 45;		/* t2 in Figure 12.10 */
-	const int t2_w = 30;		/* t2 in Figure 12.11 */
-	const int t3 = 15;		/* t3 in Figure 12.10 */
-	const int t5_r = 0;		/* t5 in Figure 12.10 */
-	const int t6_r = 45;		/* t6 in Figure 12.10 */
-	const int t6_w = 0;		/* t6 in Figure 12.11 */
-	const int t7_w = 15;		/* t7 in Figure 12.11 */
-	const int t15 = 12;		/* t15 in Figure 12.2 */
-	const int t20 = 185;		/* t20 in Figure 12.2 */
-
-	memset(&t, 0, sizeof(t));
-
-	t.cs_on = t15;
-	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.adv_on = t3;			/* Figure 12.10 */
-	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */
-	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */
-	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */
-	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */
-	t.rd_cycle = t20;		/* Figure 12.2 */
-	t.wr_cycle = t20;		/* Figure 12.4 */
-	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */
-
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
-	return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
-	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
-	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
-	smc91x_init_gpmc(SMC91X_CS);
-
-	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
-		goto free1;
-
-	gpio_direction_input(SMC91X_GPIO_IRQ);
-	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
-	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
-	if (ret)
-		goto free2;
-	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
-	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
-	if (ret)
-		goto free3;
-	gpio_direction_output(SMC91X_GPIO_RESET, 0);
-	gpio_set_value(SMC91X_GPIO_RESET, 1);
-	msleep(100);
-	gpio_set_value(SMC91X_GPIO_RESET, 0);
-
-	return;
-
-free3:
-	gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
-	gpio_free(SMC91X_GPIO_IRQ);
-free1:
-	gpmc_cs_free(SMC91X_CS);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
 static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
@@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = {
 };
 
 /* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
 	.constraints = {
 		.name			= "VCAM_DIG_18",
 		.min_uV			= 1800000,
@@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = {
 	},
 };
 
+static struct regulator_init_data rx51_vaux3_mmc = {
+	.constraints = {
+		.name			= "VMMC2_30",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc2_supply,
+};
+
 static struct regulator_init_data rx51_vaux4 = {
 	.constraints = {
 		.name			= "VCAM_ANA_28",
@@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = {
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
-	.vaux3			= &rx51_vaux3,
 	.vaux4			= &rx51_vaux4,
 	.vmmc1			= &rx51_vmmc1,
-	.vmmc2			= &rx51_vmmc2,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
 };
@@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 
 static int __init rx51_i2c_init(void)
 {
+	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+	else {
+		rx51_twldata.vaux3 = &rx51_vaux3_cam;
+		rx51_twldata.vmmc2 = &rx51_vmmc2;
+	}
 	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
 			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 	omap_register_i2c_bus(2, 100, NULL, 0);
@@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "log",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x40000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 65,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 1,
+	.gpio_irq	= 54,
+	.gpio_pwrdwn	= 86,
+	.gpio_reset	= 164,
+	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+	omap_cfg_reg(G25_34XX_GPIO86_OUT);
+	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
 
 void __init rx51_peripherals_init(void)
 {
-	platform_add_devices(rx51_peripherals_devices,
-				ARRAY_SIZE(rx51_peripherals_devices));
 	rx51_i2c_init();
-	rx51_init_smc91x();
+	board_onenand_init();
+	board_smc91x_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
new file mode 100644
index 00000000000..bac5c4321ff
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS	7
+#define ZOOM2_SMSC911X_GPIO	158
+#define ZOOM2_QUADUART_CS	3
+#define ZOOM2_QUADUART_GPIO	102
+#define QUART_CLK		1843200
+#define DEBUG_BASE		0x08000000
+#define ZOOM2_ETHR_START	DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+	[0] = {
+		.start	= ZOOM2_ETHR_START,
+		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
+	.resource	= zoom2_smsc911x_resources,
+	.dev		= {
+		.platform_data = &zoom2_smsc911x_config,
+	},
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+	int eth_cs;
+	unsigned long cs_mem_base;
+	int eth_gpio = 0;
+
+	eth_cs = ZOOM2_SMSC911X_CS;
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+		return;
+	}
+
+	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+				eth_gpio);
+		return;
+	}
+	gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase	= 0x10000000,
+		.irq		= OMAP_GPIO_IRQ(102),
+		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= QUART_CLK,
+	}, {
+		.flags		= 0
+	}
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM1,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+	int quart_cs;
+	unsigned long cs_mem_base;
+	int quart_gpio = 0;
+
+	quart_cs = ZOOM2_QUADUART_CS;
+
+	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem"
+				"for Quad UART(TL16CP754C)\n");
+		return;
+	}
+
+	quart_gpio = ZOOM2_QUADUART_GPIO;
+
+	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+								quart_gpio);
+		return;
+	}
+	gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+	int debug_board_detect = 0;
+
+	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+		"board detect\n", debug_board_detect);
+		return 0;
+	}
+	gpio_direction_input(debug_board_detect);
+
+	if (!gpio_get_value(debug_board_detect)) {
+		gpio_free(debug_board_detect);
+		return 0;
+	}
+	return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+	&zoom2_smsc911x_device,
+	&zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+	if (!omap_zoom2_debugboard_detect())
+		return 0;
+
+	zoom2_init_smsc911x();
+	zoom2_init_quaduart();
+	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
new file mode 100644
index 00000000000..bcc0f7632de
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+	omap2_init_common_hw(NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+	{ OMAP_TAG_UART,	&zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &zoom2_twldata,
+	},
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+			ARRAY_SIZE(zoom2_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+	omap_i2c_init();
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap_serial_init();
+	omap_zoom2_debugboard_init();
+	twl4030_mmc_init(mmc);
+	usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_zoom2_map_io,
+	.init_irq	= omap_zoom2_init_irq,
+	.init_machine	= omap_zoom2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 4247a153441..ba528f85749 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk)
 		return;
 
 	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
-		OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+		OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 	/* OCP barrier */
-	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
 }
 
 /*
@@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
 
-	printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
-	       clk->name, target_rate);
+	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+		 clk->name, target_rate);
 
 	*new_div = 1;
 
@@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 		/* Sanity check */
 		if (clkr->div <= last_div)
-			printk(KERN_ERR "clock: clksel_rate table not sorted "
+			pr_err("clock: clksel_rate table not sorted "
 			       "for clock %s", clk->name);
 
 		last_div = clkr->div;
@@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	}
 
 	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor for target "
+		pr_err("clock: Could not find divisor for target "
 		       "rate %ld for clock %s parent %s\n", target_rate,
 		       clk->name, clk->parent->name);
 		return ~0;
@@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 
 	*new_div = clkr->div;
 
-	printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
-	       (clk->parent->rate / clkr->div));
+	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+		 (clk->parent->rate / clkr->div));
 
 	return (clk->parent->rate / clkr->div);
 }
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
-	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
 	if (cpu_is_omap34xx()) {
 		omap2_clk_enable(clk);
 		omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index e4cef333e29..44de0271fc2 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set;
 static struct clk *vclk;
 static struct clk *sclk;
 
+static void __iomem *prcm_clksrc_ctrl;
+
 /*-------------------------------------------------------------------------
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
@@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 
 	return 0;
 }
@@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	pcc = __raw_readl(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
-		      OMAP24XX_PRCM_CLKSRC_CTRL);
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 }
 
 static const struct clkops clkops_oscck = {
@@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void)
 {
 	u32 div;
 
-	div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	div = __raw_readl(prcm_clksrc_ctrl);
 	div &= OMAP_SYSCLKDIV_MASK;
 	div >>= OMAP_SYSCLKDIV_SHIFT;
 
@@ -714,15 +714,18 @@ int __init omap2_clk_init(void)
 	struct omap_clk *c;
 	u32 clkrate;
 
-	if (cpu_is_omap242x())
+	if (cpu_is_omap242x()) {
+		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_242X;
-	else if (cpu_is_omap2430())
+	} else if (cpu_is_omap2430()) {
+		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
 		cpu_mask = RATE_IN_243X;
+	}
 
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
 	propagate_rate(&osc_ck);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88c5acb40fc..458f00cdcbe 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,6 +24,17 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
 static unsigned long omap2_table_mpu_recalc(struct clk *clk);
 static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ba05aa42bd8..9e43fe5209d 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
 	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
 	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
 	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
@@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = {
 
 #define MAX_DPLL_WAIT_TRIES		1000000
 
+#define MIN_SDRC_DLL_LOCK_FREQ		83000000
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 new_div = 0;
+	u32 unlock_dll = 0;
 	unsigned long validrate, sdrcrate;
 	struct omap_sdrc_params *sp;
 
@@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (!sp)
 		return -EINVAL;
 
-	pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		validrate);
-	pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
-		sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+		pr_debug("clock: will unlock SDRC DLL\n");
+		unlock_dll = 1;
+	}
+
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		 validrate);
+	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
 
 	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
 	WARN_ON(new_div != 1 && new_div != 2);
 
 	/* REVISIT: Add SDRC_MR changing to this code also */
 	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div);
+				  sp->actim_ctrlb, new_div, unlock_dll);
 
 	return 0;
 }
@@ -956,7 +967,7 @@ int __init omap2_clk_init(void)
 	clk_init(&omap2_clk_functions);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		clk_init_one(c->lk.clk);
+		clk_preinit(c->lk.clk);
 
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
 		if (c->cpu & cpu_clkflg) {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 017a30e9aa1..e433aec4efd 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,6 +27,8 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
+#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
+
 static unsigned long omap3_dpll_recalc(struct clk *clk);
 static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
@@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk modem_fck = {
+	.name		= "modem_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+	.name		= "sad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+	.name		= "mad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static const struct clksel omap343x_gpt_clksel[] = {
 	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
 	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
@@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
 /* SECURITY_L4_ICK2 based clocks */
 
 static struct clk security_l4_ick2 = {
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 281d5da1918..fe319ae4ca0 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = {
 static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6f3f5a36aae..6923deb98a2 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -145,6 +145,8 @@
 #define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM				(1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT				31
 
 /* CM_ICLKEN1_CORE specific bits */
 #define OMAP3430_EN_ICR					(1 << 29)
@@ -161,6 +163,8 @@
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
 #define OMAP3430_EN_OMAPCTRL				(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
+#define OMAP3430_EN_SAD2D				(1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT				3
 #define OMAP3430_EN_SDRC				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
 
@@ -176,6 +180,10 @@
 #define OMAP3430_EN_DES1				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
 
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT				3
+#define OMAP3430_EN_MAD2D				(1 << 3)
+
 /* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
 #define OMAP3430ES2_EN_TS_MASK				(1 << 1)
@@ -231,6 +239,8 @@
 #define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM				(1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT			31
 #define OMAP3430ES2_AUTO_MMC3				(1 << 30)
 #define OMAP3430ES2_AUTO_MMC3_SHIFT			30
 #define OMAP3430ES2_AUTO_ICR				(1 << 29)
@@ -287,6 +297,8 @@
 #define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
 #define OMAP3430ES1_AUTO_D2D				(1 << 3)
 #define OMAP3430ES1_AUTO_D2D_SHIFT			3
+#define OMAP3430_AUTO_SAD2D				(1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT			3
 #define OMAP3430_AUTO_SSI				(1 << 0)
 #define OMAP3430_AUTO_SSI_SHIFT				0
 
@@ -308,6 +320,8 @@
 #define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT			3
+#define OMAP3430_AUTO_MAD2D				(1 << 3)
 
 /* CM_CLKSEL_CORE */
 #define OMAP3430_CLKSEL_SSI_SHIFT			8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 65fdf78c91e..1d3c93bf86d 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
 #define OMAP2420_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global CM registers
@@ -38,6 +33,7 @@
 #define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
 #define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
 
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 00000000000..2fd22f9c5f0
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts:	Juha Yrjola
+ *		Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+	struct gpmc_timings t;
+
+	const int t_cer = 15;
+	const int t_avdp = 12;
+	const int t_aavdh = 7;
+	const int t_ce = 76;
+	const int t_aa = 76;
+	const int t_oe = 20;
+	const int t_cez = 20; /* max of t_cez, t_oez */
+	const int t_ds = 30;
+	const int t_wpl = 40;
+	const int t_wph = 30;
+
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = 0;
+	t.cs_on = 0;
+	t.adv_on = 0;
+
+	/* Read */
+	t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+	t.oe_on  = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+	t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+	t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+	t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle  = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Write */
+	t.adv_wr_off = t.adv_rd_off;
+	t.we_on  = t.oe_on;
+	if (cpu_is_omap34xx()) {
+		t.wr_data_mux_bus = t.we_on;
+		t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+	}
+	t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+	t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+	t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Configure GPMC for asynchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+				int sync_read, int sync_write, int hf)
+{
+	u32 reg;
+
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+		ONENAND_SYS_CFG1_BL_16;
+	if (sync_read)
+		reg |= ONENAND_SYS_CFG1_SYNC_READ;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+	if (sync_write)
+		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	if (hf)
+		reg |= ONENAND_SYS_CFG1_HF;
+	else
+		reg &= ~ONENAND_SYS_CFG1_HF;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+					void __iomem *onenand_base,
+					int freq)
+{
+	struct gpmc_timings t;
+	const int t_cer  = 15;
+	const int t_avdp = 12;
+	const int t_cez  = 20; /* max of t_cez, t_oez */
+	const int t_ds   = 30;
+	const int t_wpl  = 40;
+	const int t_wph  = 30;
+	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+	int err, ticks_cez;
+	int cs = cfg->cs;
+	u32 reg;
+
+	if (cfg->flags & ONENAND_SYNC_READ) {
+		sync_read = 1;
+	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+		sync_read = 1;
+		sync_write = 1;
+	}
+
+	if (!freq) {
+		/* Very first call freq is not known */
+		err = omap2_onenand_set_async_mode(cs, onenand_base);
+		if (err)
+			return err;
+		reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+		switch ((reg >> 4) & 0xf) {
+		case 0:
+			freq = 40;
+			break;
+		case 1:
+			freq = 54;
+			break;
+		case 2:
+			freq = 66;
+			break;
+		case 3:
+			freq = 83;
+			break;
+		case 4:
+			freq = 104;
+			break;
+		default:
+			freq = 54;
+			break;
+		}
+		first_time = 1;
+	}
+
+	switch (freq) {
+	case 83:
+		min_gpmc_clk_period = 12; /* 83 MHz */
+		t_ces   = 5;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 9;
+		break;
+	case 66:
+		min_gpmc_clk_period = 15; /* 66 MHz */
+		t_ces   = 6;
+		t_avds  = 5;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 11;
+		break;
+	default:
+		min_gpmc_clk_period = 18; /* 54 MHz */
+		t_ces   = 7;
+		t_avds  = 7;
+		t_avdh  = 7;
+		t_ach   = 9;
+		t_aavdh = 7;
+		t_rdyo  = 15;
+		sync_write = 0;
+		break;
+	}
+
+	tick_ns = gpmc_ticks_to_ns(1);
+	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+	gpmc_clk_ns = gpmc_ticks_to_ns(div);
+	if (gpmc_clk_ns < 15) /* >66Mhz */
+		hf = 1;
+	if (hf)
+		latency = 6;
+	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+		latency = 3;
+	else
+		latency = 4;
+
+	if (first_time)
+		set_onenand_cfg(onenand_base, latency,
+					sync_read, sync_write, hf);
+
+	if (div == 1) {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg |= (1 << 7);
+		reg |= (1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	} else {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg &= ~(1 << 7);
+		reg &= ~(1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	}
+
+	/* Set synchronous read timings */
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = min_gpmc_clk_period;
+	t.cs_on = 0;
+	t.adv_on = 0;
+	fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+	fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+	t.page_burst_access = gpmc_clk_ns;
+
+	/* Read */
+	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+	t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+		     ticks_cez);
+
+	/* Write */
+	if (sync_write) {
+		t.adv_wr_off = t.adv_rd_off;
+		t.we_on  = 0;
+		t.we_off = t.cs_rd_off;
+		t.cs_wr_off = t.cs_rd_off;
+		t.wr_cycle  = t.rd_cycle;
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+					gpmc_ns_to_ticks(min_gpmc_clk_period +
+					t_rdyo));
+			t.wr_access = t.access;
+		}
+	} else {
+		t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+							t_avdp, t_cer));
+		t.we_on  = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+		t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+		t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+		t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = t.we_on;
+			t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+		}
+	}
+
+	/* Configure GPMC for synchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_WRAPBURST_SUPP |
+			  GPMC_CONFIG1_READMULTIPLE_SUPP |
+			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+			  GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+			  GPMC_CONFIG1_PAGE_LEN(2) |
+			  (cpu_is_omap34xx() ? 0 :
+				(GPMC_CONFIG1_WAIT_READ_MON |
+				 GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_DEVICETYPE_NOR |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+	return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+	struct device *dev = &gpmc_onenand_device.dev;
+
+	/* Set sync timings in GPMC */
+	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+			freq) < 0) {
+		dev_err(dev, "Unable to set synchronous mode\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+	gpmc_onenand_data = _onenand_data;
+	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+	if (cpu_is_omap24xx() &&
+			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+	}
+
+	if (platform_device_register(&gpmc_onenand_device) < 0) {
+		printk(KERN_ERR "Unable to register OneNAND device\n");
+		return;
+	}
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 00000000000..df99d31d8b6
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact:	Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
+	.resource	= gpmc_smc91x_resources,
+	.dev		= {
+		.platform_data = &gpmc_smc91x_info,
+	},
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+	struct gpmc_timings t;
+	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
+	const int t4_r = 20;	/* Figure 12.2 read */
+	const int t4_w = 5;	/* Figure 12.4 write */
+	const int t5 = 25;	/* Figure 12.2 read */
+	const int t6 = 15;	/* Figure 12.2 read */
+	const int t7 = 5;	/* Figure 12.4 write */
+	const int t8 = 5;	/* Figure 12.4 write */
+	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
+	u32 l;
+
+	memset(&t, 0, sizeof(t));
+
+	/* Read timings */
+	t.cs_on = 0;
+	t.adv_on = t.cs_on;
+	t.oe_on = t.adv_on + t3;
+	t.access = t.oe_on + t5;
+	t.oe_off = t.access;
+	t.adv_rd_off = t.oe_off + max(t4_r, t6);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle = t20 - t.oe_on;
+
+	/* Write timings */
+	t.we_on = t.adv_on + t3;
+
+	if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+		t.wr_data_mux_bus = t.we_on;
+		t.we_off = t.wr_data_mux_bus + t7;
+	} else
+		t.we_off = t.we_on + t7;
+	if (cpu_is_omap34xx())
+		t.wr_access = t.we_off;
+	t.adv_wr_off = t.we_off + max(t4_w, t8);
+	t.cs_wr_off = t.we_off + t4_w;
+	t.wr_cycle = t20 - t.we_on;
+
+	l = GPMC_CONFIG1_DEVICESIZE_16;
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		l |= GPMC_CONFIG1_MUXADDDATA;
+	if (gpmc_cfg->flags & GPMC_READ_MON)
+		l |= GPMC_CONFIG1_WAIT_READ_MON;
+	if (gpmc_cfg->flags & GPMC_WRITE_MON)
+		l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+	if (gpmc_cfg->wait_pin)
+		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+	/*
+	 * FIXME: Calculate the address and data bus muxed timings.
+	 * Note that at least adv_rd_off needs to be changed according
+	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+	 * FPGA in between smc91x and omap as the timings are different
+	 * from above?
+	 */
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		return 0;
+
+	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	gpmc_cfg = board_data;
+
+	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+		gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+	if (gpmc_cfg->retime) {
+		ret = gpmc_cfg->retime();
+		if (ret != 0)
+			goto free1;
+	}
+
+	if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+		goto free1;
+
+	gpio_direction_input(gpmc_cfg->gpio_irq);
+	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+	if (gpmc_cfg->gpio_pwrdwn) {
+		ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+		if (ret)
+			goto free2;
+		gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+	}
+
+	if (gpmc_cfg->gpio_reset) {
+		ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+		if (ret)
+			goto free3;
+
+		gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+		gpio_set_value(gpmc_cfg->gpio_reset, 1);
+		msleep(100);
+		gpio_set_value(gpmc_cfg->gpio_reset, 0);
+	}
+
+	if (platform_device_register(&gpmc_smc91x_device) < 0) {
+		printk(KERN_ERR "Unable to register smc91x device\n");
+		gpio_free(gpmc_cfg->gpio_reset);
+		goto free3;
+	}
+
+	return;
+
+free3:
+	if (gpmc_cfg->gpio_pwrdwn)
+		gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+	gpio_free(gpmc_cfg->gpio_irq);
+free1:
+	gpmc_cs_free(gpmc_cfg->cs);
+
+	printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049c1d5..f91934b2b09 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
  *
  * Author: Juha Yrjola
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -424,6 +427,9 @@ void __init gpmc_init(void)
 	} else if (cpu_is_omap34xx()) {
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
+	} else if (cpu_is_omap44xx()) {
+		ck = "gpmc_fck";
+		l = OMAP44XX_GPMC_BASE;
 	}
 
 	gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914e0f8..458990e20c6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -200,7 +203,10 @@ void __init omap2_check_revision(void)
 		omap24xx_check_revision();
 	else if (cpu_is_omap34xx())
 		omap34xx_check_revision();
-	else
+	else if (cpu_is_omap44xx()) {
+		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+		return;
+	} else
 		pr_err("OMAP revision unknown, please fix!\n");
 
 	/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3a232..32afd944821 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
  * OMAP2 I/O mapping code
  *
  * Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
  *
  * Author:
  *	Juha Yrjola <juha.yrjola@nokia.com>
  *	Syed Khasim <x0khasim@ti.com>
  *
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -30,6 +32,7 @@
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
 
+#ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
 #include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
-
+#endif
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 	},
 };
 #endif
+#ifdef	CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_44XX_PHYS),
+		.length		= L3_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_44XX_PHYS),
+		.length		= L4_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WK_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_44XX_PHYS),
+		.length		= L4_WK_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+		.length		= OMAP44XX_GPMC_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
+		.length		= L4_PER_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_EMU_44XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_44XX_PHYS),
+		.length		= L4_EMU_44XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
 
 void __init omap2_map_common_io(void)
 {
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
 	 * revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap2_sdrc_init(sp);
+#endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
new file mode 100644
index 00000000000..015f22a53ea
--- /dev/null
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -0,0 +1,323 @@
+/*
+ * omap iommu: omap2/3 architecture specific functions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *		Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <mach/iommu.h>
+
+/*
+ * omap2 architecture specific register bit definitions
+ */
+#define IOMMU_ARCH_VERSION	0x00000011
+
+/* SYSCONF */
+#define MMU_SYS_IDLE_SHIFT	3
+#define MMU_SYS_IDLE_FORCE	(0 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_NONE	(1 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_SMART	(2 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_MASK	(3 << MMU_SYS_IDLE_SHIFT)
+
+#define MMU_SYS_SOFTRESET	(1 << 1)
+#define MMU_SYS_AUTOIDLE	1
+
+/* SYSSTATUS */
+#define MMU_SYS_RESETDONE	1
+
+/* IRQSTATUS & IRQENABLE */
+#define MMU_IRQ_MULTIHITFAULT	(1 << 4)
+#define MMU_IRQ_TABLEWALKFAULT	(1 << 3)
+#define MMU_IRQ_EMUMISS		(1 << 2)
+#define MMU_IRQ_TRANSLATIONFAULT	(1 << 1)
+#define MMU_IRQ_TLBMISS		(1 << 0)
+#define MMU_IRQ_MASK	\
+	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
+	 MMU_IRQ_TRANSLATIONFAULT)
+
+/* MMU_CNTL */
+#define MMU_CNTL_SHIFT		1
+#define MMU_CNTL_MASK		(7 << MMU_CNTL_SHIFT)
+#define MMU_CNTL_EML_TLB	(1 << 3)
+#define MMU_CNTL_TWL_EN		(1 << 2)
+#define MMU_CNTL_MMU_EN		(1 << 1)
+
+#define get_cam_va_mask(pgsz)				\
+	(((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_1M)  ? 0xfff00000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :	\
+	 ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
+
+static int omap2_iommu_enable(struct iommu *obj)
+{
+	u32 l, pa;
+	unsigned long timeout;
+
+	if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd,  SZ_16K))
+		return -EINVAL;
+
+	pa = virt_to_phys(obj->iopgd);
+	if (!IS_ALIGNED(pa, SZ_16K))
+		return -EINVAL;
+
+	iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = iommu_read_reg(obj, MMU_SYSSTATUS);
+		if (l & MMU_SYS_RESETDONE)
+			break;
+	} while (time_after(jiffies, timeout));
+
+	if (!(l & MMU_SYS_RESETDONE)) {
+		dev_err(obj->dev, "can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
+	l = iommu_read_reg(obj, MMU_REVISION);
+	dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
+		 (l >> 4) & 0xf, l & 0xf);
+
+	l = iommu_read_reg(obj, MMU_SYSCONFIG);
+	l &= ~MMU_SYS_IDLE_MASK;
+	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
+	iommu_write_reg(obj, l, MMU_SYSCONFIG);
+
+	iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
+	iommu_write_reg(obj, pa, MMU_TTB);
+
+	l = iommu_read_reg(obj, MMU_CNTL);
+	l &= ~MMU_CNTL_MASK;
+	l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+	iommu_write_reg(obj, l, MMU_CNTL);
+
+	return 0;
+}
+
+static void omap2_iommu_disable(struct iommu *obj)
+{
+	u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+	l &= ~MMU_CNTL_MASK;
+	iommu_write_reg(obj, l, MMU_CNTL);
+	iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
+
+	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
+}
+
+static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+{
+	int i;
+	u32 stat, da;
+	const char *err_msg[] =	{
+		"tlb miss",
+		"translation fault",
+		"emulation miss",
+		"table walk fault",
+		"multi hit fault",
+	};
+
+	stat = iommu_read_reg(obj, MMU_IRQSTATUS);
+	stat &= MMU_IRQ_MASK;
+	if (!stat)
+		return 0;
+
+	da = iommu_read_reg(obj, MMU_FAULT_AD);
+	*ra = da;
+
+	dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
+
+	for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
+		if (stat & (1 << i))
+			printk("%s ", err_msg[i]);
+	}
+	printk("\n");
+
+	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+	return stat;
+}
+
+static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
+	cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
+}
+
+static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
+	iommu_write_reg(obj, cr->ram, MMU_RAM);
+}
+
+static u32 omap2_cr_to_virt(struct cr_regs *cr)
+{
+	u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
+	u32 mask = get_cam_va_mask(cr->cam & page_size);
+
+	return cr->cam & mask;
+}
+
+static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+{
+	struct cr_regs *cr;
+
+	if (e->da & ~(get_cam_va_mask(e->pgsz))) {
+		dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
+			e->da);
+		return ERR_PTR(-EINVAL);
+	}
+
+	cr = kmalloc(sizeof(*cr), GFP_KERNEL);
+	if (!cr)
+		return ERR_PTR(-ENOMEM);
+
+	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+	cr->ram = e->pa | e->endian | e->elsz | e->mixed;
+
+	return cr;
+}
+
+static inline int omap2_cr_valid(struct cr_regs *cr)
+{
+	return cr->cam & MMU_CAM_V;
+}
+
+static u32 omap2_get_pte_attr(struct iotlb_entry *e)
+{
+	u32 attr;
+
+	attr = e->mixed << 5;
+	attr |= e->endian;
+	attr |= e->elsz >> 3;
+	attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
+
+	return attr;
+}
+
+static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+{
+	char *p = buf;
+
+	/* FIXME: Need more detail analysis of cam/ram */
+	p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+
+	return p - buf;
+}
+
+#define pr_reg(name)							\
+	p += sprintf(p, "%20s: %08x\n",					\
+		     __stringify(name), iommu_read_reg(obj, MMU_##name));
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+	char *p = buf;
+
+	pr_reg(REVISION);
+	pr_reg(SYSCONFIG);
+	pr_reg(SYSSTATUS);
+	pr_reg(IRQSTATUS);
+	pr_reg(IRQENABLE);
+	pr_reg(WALKING_ST);
+	pr_reg(CNTL);
+	pr_reg(FAULT_AD);
+	pr_reg(TTB);
+	pr_reg(LOCK);
+	pr_reg(LD_TLB);
+	pr_reg(CAM);
+	pr_reg(RAM);
+	pr_reg(GFLUSH);
+	pr_reg(FLUSH_ENTRY);
+	pr_reg(READ_CAM);
+	pr_reg(READ_RAM);
+	pr_reg(EMU_FAULT_AD);
+
+	return p - buf;
+}
+
+static void omap2_iommu_save_ctx(struct iommu *obj)
+{
+	int i;
+	u32 *p = obj->ctx;
+
+	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+		p[i] = iommu_read_reg(obj, i * sizeof(u32));
+		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+	}
+
+	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_iommu_restore_ctx(struct iommu *obj)
+{
+	int i;
+	u32 *p = obj->ctx;
+
+	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+		iommu_write_reg(obj, p[i], i * sizeof(u32));
+		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+	}
+
+	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+	e->da		= cr->cam & MMU_CAM_VATAG_MASK;
+	e->pa		= cr->ram & MMU_RAM_PADDR_MASK;
+	e->valid	= cr->cam & MMU_CAM_V;
+	e->pgsz		= cr->cam & MMU_CAM_PGSZ_MASK;
+	e->endian	= cr->ram & MMU_RAM_ENDIAN_MASK;
+	e->elsz		= cr->ram & MMU_RAM_ELSZ_MASK;
+	e->mixed	= cr->ram & MMU_RAM_MIXED;
+}
+
+static const struct iommu_functions omap2_iommu_ops = {
+	.version	= IOMMU_ARCH_VERSION,
+
+	.enable		= omap2_iommu_enable,
+	.disable	= omap2_iommu_disable,
+	.fault_isr	= omap2_iommu_fault_isr,
+
+	.tlb_read_cr	= omap2_tlb_read_cr,
+	.tlb_load_cr	= omap2_tlb_load_cr,
+
+	.cr_to_e	= omap2_cr_to_e,
+	.cr_to_virt	= omap2_cr_to_virt,
+	.alloc_cr	= omap2_alloc_cr,
+	.cr_valid	= omap2_cr_valid,
+	.dump_cr	= omap2_dump_cr,
+
+	.get_pte_attr	= omap2_get_pte_attr,
+
+	.save_ctx	= omap2_iommu_save_ctx,
+	.restore_ctx	= omap2_iommu_restore_ctx,
+	.dump_ctx	= omap2_iommu_dump_ctx,
+};
+
+static int __init omap2_iommu_init(void)
+{
+	return install_iommu_arch(&omap2_iommu_ops);
+}
+module_init(omap2_iommu_init);
+
+static void __exit omap2_iommu_exit(void)
+{
+	uninstall_iommu_arch(&omap2_iommu_ops);
+}
+module_exit(omap2_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 998c5c45587..b82863887f1 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -28,7 +28,6 @@
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
 #define INTC_PENDING_IRQ0	0x0098
-
 /* Number of IRQ state bits in each MIR register */
 #define IRQ_BITS_PER_REG	32
 
@@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = {
 	.ack	= omap_mask_ack_irq,
 	.mask	= omap_mask_irq,
 	.unmask	= omap_unmask_irq,
-	.disable = omap_mask_irq,
 };
 
 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
@@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
 	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
 }
 
+int omap_irq_pending(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		struct omap_irq_bank *bank = irq_banks + i;
+		int irq;
+
+		for (irq = 0; irq < bank->nr_irqs; irq += 32)
+			if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+					       ((irq >> 5) << 5)))
+				return 1;
+	}
+	return 0;
+}
+
 void __init omap_init_irq(void)
 {
 	unsigned long nr_of_irqs = 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e7220..9756a878fd9 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <mach/control.h>
@@ -26,31 +26,9 @@
 
 #include "mmc-twl4030.h"
 
-#if defined(CONFIG_TWL4030_CORE) && \
-	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
-#define LDO_CLR			0x00
-#define VSEL_S2_CLR		0x40
-
-#define VMMC1_DEV_GRP		0x27
-#define VMMC1_CLR		0x00
-#define VMMC1_315V		0x03
-#define VMMC1_300V		0x02
-#define VMMC1_285V		0x01
-#define VMMC1_185V		0x00
-#define VMMC1_DEDICATED		0x2A
-
-#define VMMC2_DEV_GRP		0x2B
-#define VMMC2_CLR		0x40
-#define VMMC2_315V		0x0c
-#define VMMC2_300V		0x0b
-#define VMMC2_285V		0x0a
-#define VMMC2_280V		0x09
-#define VMMC2_260V		0x08
-#define VMMC2_185V		0x06
-#define VMMC2_DEDICATED		0x2E
-
-#define VMMC_DEV_GRP_P1		0x20
+#if defined(CONFIG_REGULATOR) && \
+	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
 
 static struct twl_mmc_controller {
 	struct omap_mmc_platform_data	*mmc;
-	u8		twl_vmmc_dev_grp;
-	u8		twl_mmc_dedicated;
-	char		name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
-	{
-		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC1_DEDICATED,
-	},
-	{
-		.twl_vmmc_dev_grp		= VMMC2_DEV_GRP,
-		.twl_mmc_dedicated		= VMMC2_DEDICATED,
-	},
-};
+	/* Vcc == configured supply
+	 * Vcc_alt == optional
+	 *   -	MMC1, supply for DAT4..DAT7
+	 *   -	MMC2/MMC2, external level shifter voltage supply, for
+	 *	chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+	 */
+	struct regulator		*vcc;
+	struct regulator		*vcc_aux;
+	char				name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
 
 static int twl_mmc_card_detect(int irq)
 {
@@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
 	int ret = 0;
 	int i;
 
-	ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
-	if (ret)
-		goto done;
-	ret = gpio_direction_input(mmc->slots[0].switch_pin);
-	if (ret)
-		goto err;
+	/* MMC/SD/SDIO doesn't require a card detect switch */
+	if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+		ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+		if (ret)
+			goto done;
+		ret = gpio_direction_input(mmc->slots[0].switch_pin);
+		if (ret)
+			goto err;
+	}
 
+	/* require at least main regulator */
 	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
 		if (hsmmc[i].name == mmc->slots[0].name) {
+			struct regulator *reg;
+
 			hsmmc[i].mmc = mmc;
+
+			reg = regulator_get(dev, "vmmc");
+			if (IS_ERR(reg)) {
+				dev_dbg(dev, "vmmc regulator missing\n");
+				/* HACK: until fixed.c regulator is usable,
+				 * we don't require a main regulator
+				 * for MMC2 or MMC3
+				 */
+				if (i != 0)
+					break;
+				ret = PTR_ERR(reg);
+				goto err;
+			}
+			hsmmc[i].vcc = reg;
+			mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+			/* allow an aux regulator */
+			reg = regulator_get(dev, "vmmc_aux");
+			hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+			/* UGLY HACK:  workaround regulator framework bugs.
+			 * When the bootloader leaves a supply active, it's
+			 * initialized with zero usecount ... and we can't
+			 * disable it without first enabling it.  Until the
+			 * framework is fixed, we need a workaround like this
+			 * (which is safe for MMC, but not in general).
+			 */
+			if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+				regulator_enable(hsmmc[i].vcc);
+				regulator_disable(hsmmc[i].vcc);
+			}
+			if (hsmmc[i].vcc_aux) {
+				if (regulator_is_enabled(reg) > 0) {
+					regulator_enable(reg);
+					regulator_disable(reg);
+				}
+			}
+
 			break;
 		}
 	}
@@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
 #define twl_mmc_resume	NULL
 #endif
 
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR	(MMC_VDD_165_195 \
-		|MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
-		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
-	int ret;
-	u8 vmmc = 0, dev_grp_val;
-
-	if (!vdd)
-		goto doit;
-
-	if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
-		/* VMMC1:  max 220 mA.  And for 8-bit mode,
-		 * VSIM:  max 50 mA
-		 */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC1_185V;
-			/* and VSIM_180V */
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC1_285V;
-			/* and VSIM_280V */
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC1_300V;
-			/* and VSIM_300V */
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC1_315V;
-			/* error if VSIM needed */
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
-		/* VMMC2:  max 100 mA */
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-			vmmc = VMMC2_185V;
-			break;
-		case MMC_VDD_25_26:
-		case MMC_VDD_26_27:
-			vmmc = VMMC2_260V;
-			break;
-		case MMC_VDD_27_28:
-			vmmc = VMMC2_280V;
-			break;
-		case MMC_VDD_28_29:
-			vmmc = VMMC2_285V;
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			vmmc = VMMC2_300V;
-			break;
-		case MMC_VDD_31_32:
-			vmmc = VMMC2_315V;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		return -EINVAL;
-	}
-
-doit:
-	if (vdd)
-		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
-	else
-		dev_grp_val = LDO_CLR;		/* Power down */
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					dev_grp_val, c->twl_vmmc_dev_grp);
-	if (ret || !vdd)
-		return ret;
-
-	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-					vmmc, c->twl_mmc_dedicated);
-
-	return ret;
-}
-
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
@@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 
 	/*
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
 	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
 	 *
 	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
 	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
 	 */
 	if (power_on) {
 		if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
-		ret = twl_mmc_set_voltage(c, 0);
+		ret = mmc_regulator_set_ocr(c->vcc, 0);
 
 		/* 100ms delay required for PBIAS configuration */
 		msleep(100);
@@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
-	int ret;
+	int ret = 0;
 	struct twl_mmc_controller *c = &hsmmc[1];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/* If we don't see a Vcc regulator, assume it's a fixed
+	 * voltage always-on regulator.
+	 */
+	if (!c->vcc)
+		return 0;
+
 	/*
-	 * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+	 * Assume Vcc regulator is used only to power the card ... OMAP
 	 * VDDS is used to power the pins, optionally with a transceiver to
 	 * support cards using voltages other than VDDS (1.8V nominal).  When a
 	 * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+	 *
+	 * In some cases this regulator won't support enable/disable;
+	 * e.g. it's a fixed rail for a WLAN chip.
+	 *
+	 * In other cases vcc_aux switches interface power.  Example, for
+	 * eMMC cards it represents VccQ.  Sometimes transceivers or SDIO
+	 * chips/cards need an interface voltage rail too.
 	 */
 	if (power_on) {
+		/* only MMC2 supports a CLKIN */
 		if (mmc->slots[0].internal_clock) {
 			u32 reg;
 
@@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
 			omap_ctrl_writel(reg, control_devconf1_offset);
 		}
-		ret = twl_mmc_set_voltage(c, vdd);
+		ret = mmc_regulator_set_ocr(c->vcc, vdd);
+		/* enable interface voltage rail, if needed */
+		if (ret == 0 && c->vcc_aux) {
+			ret = regulator_enable(c->vcc_aux);
+			if (ret < 0)
+				ret = mmc_regulator_set_ocr(c->vcc, 0);
+		}
 	} else {
-		ret = twl_mmc_set_voltage(c, 0);
+		if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+			ret = regulator_disable(c->vcc_aux);
+		if (ret == 0)
+			ret = mmc_regulator_set_ocr(c->vcc, 0);
 	}
 
 	return ret;
 }
 
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
-		int vdd)
-{
-	/*
-	 * Assume MMC3 has self-powered device connected, for example on-board
-	 * chip with external power source.
-	 */
-	return 0;
-}
-
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		mmc->slots[0].wires = c->wires;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
+		mmc->init = twl_mmc_late_init;
 
-		/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+		/* note: twl4030 card detect GPIOs can disable VMMCx ... */
 		if (gpio_is_valid(c->gpio_cd)) {
-			mmc->init = twl_mmc_late_init;
 			mmc->cleanup = twl_mmc_cleanup;
 			mmc->suspend = twl_mmc_suspend;
 			mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].gpio_wp = -EINVAL;
 
-		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
-		 * the TWL4030's VMMC1 and VMMC2, respectively;
-		 * and that MMC3 device has it's own power source.
+		/* NOTE:  MMC slots should have a Vcc regulator set up.
+		 * This may be from a TWL4030-family chip, another
+		 * controllable regulator, or a fixed supply.
+		 *
+		 * temporary HACK: ocr_mask instead of fixed supply
 		 */
+		mmc->slots[0].ocr_mask = c->ocr_mask;
 
 		switch (c->mmc) {
 		case 1:
+			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
-			mmc->slots[0].ocr_mask = MMC1_OCR;
 			break;
 		case 2:
-			mmc->slots[0].set_power = twl_mmc2_set_power;
-			if (c->transceiver)
-				mmc->slots[0].ocr_mask = MMC2_OCR;
-			else
-				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
-			break;
+			if (c->ext_clock)
+				c->transceiver = 1;
+			if (c->transceiver && c->wires > 4)
+				c->wires = 4;
+			/* FALLTHROUGH */
 		case 3:
-			mmc->slots[0].set_power = twl_mmc3_set_power;
-			mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+			/* off-chip level shifting, or none */
+			mmc->slots[0].set_power = twl_mmc23_set_power;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e862429..3807c45c9a6 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
 	struct device *dev;	/* returned: pointer to mmc adapter */
+	int	ocr_mask;	/* temporary HACK */
 };
 
-#if	defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
 
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
new file mode 100644
index 00000000000..4afadba0947
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -0,0 +1,46 @@
+/*
+ * Secondary CPU startup routine source file.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define OMAP4_AUX_CORE_BOOT1_PA			0x48281804
+
+	__INIT
+
+/*
+ * OMAP4 specific entry point for secondary CPU to jump from ROM
+ * code.  This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update the this flag using a hardware
+ * register AuxCoreBoot1.
+ */
+ENTRY(omap_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #0x0f
+hold:	ldr	r1, =OMAP4_AUX_CORE_BOOT1_PA	@ read from AuxCoreBoot1
+	ldr	r2, [r1]
+	cmp	r2, r0
+	bne	hold
+
+	/*
+	 * we've been released from the cpu_release,secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
new file mode 100644
index 00000000000..8fe8d230f21
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -0,0 +1,178 @@
+/*
+ * OMAP4 SMP source file. It contains platform specific fucntions
+ * needed for the linux smp kernel.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/* Registers used for communicating startup information */
+#define OMAP4_AUXCOREBOOT_REG0		(OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+#define OMAP4_AUXCOREBOOT_REG1		(OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+
+/* SCU base address */
+static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+
+/*
+ * Use SCU config register to count number of cores
+ */
+static inline unsigned int get_core_count(void)
+{
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * If any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+
+	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * Update the AuxCoreBoot1 with boot state for secondary core.
+	 * omap_secondary_startup() routine will hold the secondary core till
+	 * the AuxCoreBoot1 register is updated with cpu state
+	 * A barrier is added to ensure that write buffer is drained
+	 */
+	__raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+	smp_wmb();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout))
+		;
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+	/*
+	 * Write the address of secondary startup routine into the
+	 * AuxCoreBoot0 where ROM code will jump and start executing
+	 * on secondary core once out of WFE
+	 * A barrier is added to ensure that write buffer is drained
+	 */
+	__raw_writel(virt_to_phys(omap_secondary_startup),	   \
+					OMAP4_AUXCOREBOOT_REG0);
+	smp_wmb();
+
+	/*
+	 * Send a 'sev' to wake the secondary core from WFE.
+	 */
+	set_event();
+	mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "OMAP4: strange core count of 0? Default to 1\n");
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "OMAP4: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		/*
+		 * Initialise the SCU and wake up the secondary core using
+		 * wakeup_secondary().
+		 */
+		scu_enable(scu_base);
+		wakeup_secondary();
+	}
+}
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
new file mode 100644
index 00000000000..194189c746c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -0,0 +1,105 @@
+/*
+ * omap iommu: omap3 device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/iommu.h>
+
+#define OMAP3_MMU1_BASE	0x480bd400
+#define OMAP3_MMU2_BASE	0x5d000000
+#define OMAP3_MMU1_IRQ	24
+#define OMAP3_MMU2_IRQ	28
+
+
+static unsigned long iommu_base[] __initdata = {
+	OMAP3_MMU1_BASE,
+	OMAP3_MMU2_BASE,
+};
+
+static int iommu_irq[] __initdata = {
+	OMAP3_MMU1_IRQ,
+	OMAP3_MMU2_IRQ,
+};
+
+static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+	{
+		.name = "isp",
+		.nr_tlb_entries = 8,
+		.clk_name = "cam_ick",
+	},
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+	{
+		.name = "iva2",
+		.nr_tlb_entries = 32,
+		.clk_name = "iva2_ck",
+	},
+#endif
+};
+#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+
+static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
+
+static int __init omap3_iommu_init(void)
+{
+	int i, err;
+
+	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
+		struct platform_device *pdev;
+		struct resource res[2];
+
+		pdev = platform_device_alloc("omap-iommu", i);
+		if (!pdev) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+
+		memset(res, 0,  sizeof(res));
+		res[0].start = iommu_base[i];
+		res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = res[1].end = iommu_irq[i];
+		res[1].flags = IORESOURCE_IRQ;
+
+		err = platform_device_add_resources(pdev, res,
+						    ARRAY_SIZE(res));
+		if (err)
+			goto err_out;
+		err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
+					       sizeof(omap3_iommu_pdata[0]));
+		if (err)
+			goto err_out;
+		err = platform_device_add(pdev);
+		if (err)
+			goto err_out;
+		omap3_iommu_pdev[i] = pdev;
+	}
+	return 0;
+
+err_out:
+	while (i--)
+		platform_device_put(omap3_iommu_pdev[i]);
+	return err;
+}
+module_init(omap3_iommu_init);
+
+static void __exit omap3_iommu_exit(void)
+{
+	int i;
+
+	for (i = 0; i < NR_IOMMU_DEVICES; i++)
+		platform_device_unregister(omap3_iommu_pdev[i]);
+}
+module_exit(omap3_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap3 device registration");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
new file mode 100644
index 00000000000..6cc375a275b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -0,0 +1,152 @@
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg)    \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg)     \
+	regs[reg_count].name = #mod "." #reg; \
+	regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+	regs[reg_count].name = #reg; \
+	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+	struct reg {
+		const char *name;
+		u32 val;
+	} regs[32];
+	int reg_count = 0, i;
+	const char *s1 = NULL, *s2 = NULL;
+
+	if (!resume) {
+#if 0
+		/* MPU */
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+		DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+		DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+		/* INTC */
+		DUMP_INTC_REG(INTC_MIR0, 0x0084);
+		DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+		DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+		DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+					OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+		}
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+		DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+		DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+		/* DSP */
+		if (cpu_is_omap24xx()) {
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+		}
+#endif
+	} else {
+		DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+		if (cpu_is_omap24xx())
+			DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+		DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+		DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+		DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+		DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+	}
+
+	switch (mode) {
+	case 0:
+		s1 = "full";
+		s2 = "retention";
+		break;
+	case 1:
+		s1 = "MPU";
+		s2 = "retention";
+		break;
+	case 2:
+		s1 = "MPU";
+		s2 = "idle";
+		break;
+	}
+
+	if (!resume)
+#ifdef CONFIG_NO_HZ
+		printk(KERN_INFO
+		       "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+		       jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+					jiffies));
+#else
+		printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+	else
+		printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+			us / 1000, us % 1000);
+
+	for (i = 0; i < reg_count; i++)
+		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index ea8ceaed09c..00000000000
--- a/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
-	local_irq_disable();
-	local_fiq_disable();
-	if (need_resched()) {
-		local_fiq_enable();
-		local_irq_enable();
-		return;
-	}
-
-	omap2_sram_idle();
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
-	/* We cannot sleep in idle until we have resumed */
-	saved_idle = pm_idle;
-	pm_idle = NULL;
-	return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
-	return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
-	int ret = 0;
-
-	switch (state)
-	{
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap2_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static void omap2_pm_finish(void)
-{
-	pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
-	.prepare	= omap2_pm_prepare,
-	.enter		= omap2_pm_enter,
-	.finish		= omap2_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
-	return 0;
-}
-
-__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
new file mode 100644
index 00000000000..f7b3baf7667
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_debug				0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+					void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
new file mode 100644
index 00000000000..db1025562fb
--- /dev/null
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -0,0 +1,549 @@
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+				  void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+	f2 &= ~OMAP24XX_EN_UART3;
+
+	if (f1 | f2)
+		return 1;
+	return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+	u32 l;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* There is 1 reference hold for all children of the oscillator
+	 * clock, the following will remove it. If no one else uses the
+	 * oscillator itself it will be disabled if/when we enter retention
+	 * mode.
+	 */
+	clk_disable(osc_ck);
+
+	/* Clear old wake-up events */
+	/* REVISIT: These write to reserved bits? */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Workaround to kill USB */
+	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+	omap2_gpio_prepare_for_retention();
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(0, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	/* One last check for pending IRQs to avoid extra latency due
+	 * to sleeping unnecessarily. */
+	if (omap_irq_pending())
+		goto no_sleep;
+
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	/* Jump to SRAM suspend code */
+	omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+			   OMAP_SDRC_REGADDR(SDRC_POWER));
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+
+no_sleep:
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(0, 1, tmp);
+	}
+	omap2_gpio_resume_after_retention();
+
+	clk_enable(osc_ck);
+
+	/* clear CORE wake-up events */
+	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+	prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+	/* MPU domain wake events */
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x01)
+		prm_write_mod_reg(0x01, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	if (l & 0x20)
+		prm_write_mod_reg(0x20, OCP_MOD,
+				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+	/* Mask future PRCM-to-MPU interrupts */
+	prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+	u32 l;
+
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+		 OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+		 OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+		return 0;
+	/* Check for UART3. */
+	l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3)
+		return 0;
+	if (sti_console_enabled)
+		return 0;
+
+	return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+	int only_idle = 0;
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+
+	/* Putting MPU into the WFI state while a transfer is active
+	 * seems to cause the I2C block to timeout. Why? Good question. */
+	if (omap2_i2c_active())
+		return;
+
+	/* The peripherals seem not to be able to wake up the MPU when
+	 * it is in retention mode. */
+	if (omap2_allow_mpu_retention()) {
+		/* REVISIT: These write to reserved bits? */
+		prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+		prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+		prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+		/* Try to enter MPU retention */
+		prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+				  OMAP_LOGICRETSTATE,
+				  MPU_MOD, PM_PWSTCTRL);
+	} else {
+		/* Block MPU retention */
+
+		prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+		only_idle = 1;
+	}
+
+	if (omap2_pm_debug) {
+		omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+		getnstimeofday(&ts_preidle);
+	}
+
+	omap2_sram_idle();
+
+	if (omap2_pm_debug) {
+		unsigned long long tmp;
+
+		getnstimeofday(&ts_postidle);
+		ts_idle = timespec_sub(ts_postidle, ts_preidle);
+		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+		omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+	}
+}
+
+static int omap2_can_sleep(void)
+{
+	if (omap2_fclks_active())
+		return 0;
+	if (osc_ck->usecount > 1)
+		return 0;
+	if (omap_dma_running())
+		return 0;
+
+	return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap2_can_sleep()) {
+		if (omap_irq_pending())
+			goto out;
+		omap2_enter_mpu_retention();
+		goto out;
+	}
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap2_enter_full_retention();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+	/* We cannot sleep in idle until we have resumed */
+	disable_hlt();
+	return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+	u32 wken_wkup, mir1;
+
+	wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+	/* Mask GPT1 */
+	mir1 = omap_readl(0x480fe0a4);
+	omap_writel(1 << 5, 0x480fe0ac);
+
+	omap_uart_prepare_suspend();
+	omap2_enter_full_retention();
+
+	omap_writel(mir1, 0x480fe0a4);
+	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+	return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap2_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap2_pm_prepare,
+	.enter		= omap2_pm_enter,
+	.finish		= omap2_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+	return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+	int i, num_mem_banks;
+	struct powerdomain *pwrdm;
+
+	/* Enable autoidle */
+	prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+			  OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+	/* Set all domain wakeup dependencies */
+	prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+	if (cpu_is_omap2430())
+		prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+	/*
+	 * Set CORE powerdomain memory banks to retain their contents
+	 * during RETENTION
+	 */
+	num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+	for (i = 0; i < num_mem_banks; i++)
+		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+	/* Set CORE powerdomain's next power state to RETENTION */
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+	/*
+	 * Set MPU powerdomain's next power state to RETENTION;
+	 * preserve logic state during retention
+	 */
+	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+	/* Force-power down DSP, GFX powerdomains */
+
+	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(dsp_clkdm);
+
+	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+	omap2_clkdm_sleep(gfx_clkdm);
+
+	/* Enable clockdomain hardware-supervised control for all clkdms */
+	clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+	/* Enable clock autoidle for all domains */
+	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+			 OMAP24XX_AUTO_MAILBOXES |
+			 OMAP24XX_AUTO_WDT4 |
+			 OMAP2420_AUTO_WDT3 |
+			 OMAP24XX_AUTO_MSPRO |
+			 OMAP2420_AUTO_MMC |
+			 OMAP24XX_AUTO_FAC |
+			 OMAP2420_AUTO_EAC |
+			 OMAP24XX_AUTO_HDQ |
+			 OMAP24XX_AUTO_UART2 |
+			 OMAP24XX_AUTO_UART1 |
+			 OMAP24XX_AUTO_I2C2 |
+			 OMAP24XX_AUTO_I2C1 |
+			 OMAP24XX_AUTO_MCSPI2 |
+			 OMAP24XX_AUTO_MCSPI1 |
+			 OMAP24XX_AUTO_MCBSP2 |
+			 OMAP24XX_AUTO_MCBSP1 |
+			 OMAP24XX_AUTO_GPT12 |
+			 OMAP24XX_AUTO_GPT11 |
+			 OMAP24XX_AUTO_GPT10 |
+			 OMAP24XX_AUTO_GPT9 |
+			 OMAP24XX_AUTO_GPT8 |
+			 OMAP24XX_AUTO_GPT7 |
+			 OMAP24XX_AUTO_GPT6 |
+			 OMAP24XX_AUTO_GPT5 |
+			 OMAP24XX_AUTO_GPT4 |
+			 OMAP24XX_AUTO_GPT3 |
+			 OMAP24XX_AUTO_GPT2 |
+			 OMAP2420_AUTO_VLYNQ |
+			 OMAP24XX_AUTO_DSS,
+			 CORE_MOD, CM_AUTOIDLE1);
+	cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+			 OMAP24XX_AUTO_SSI |
+			 OMAP24XX_AUTO_USB,
+			 CORE_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+			 OMAP24XX_AUTO_GPMC |
+			 OMAP24XX_AUTO_SDMA,
+			 CORE_MOD, CM_AUTOIDLE3);
+	cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+			 OMAP24XX_AUTO_AES |
+			 OMAP24XX_AUTO_RNG |
+			 OMAP24XX_AUTO_SHA |
+			 OMAP24XX_AUTO_DES,
+			 CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+	/* Put DPLL and both APLLs into autoidle mode */
+	cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+			 (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+			 PLL_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+			 OMAP24XX_AUTO_WDT1 |
+			 OMAP24XX_AUTO_MPU_WDT |
+			 OMAP24XX_AUTO_GPIOS |
+			 OMAP24XX_AUTO_32KSYNC |
+			 OMAP24XX_AUTO_GPT1,
+			 WKUP_MOD, CM_AUTOIDLE);
+
+	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+	 * stabilisation */
+	prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+	/* Configure automatic voltage transition */
+	prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+			  OMAP2_PRCM_VOLTSETUP_OFFSET);
+	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+			  (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+			  OMAP24XX_MEMRETCTRL |
+			  (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+			  (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+			  OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+	/* Enable wake-up events */
+	prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+			  WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+	u32 l;
+
+	if (!cpu_is_omap24xx())
+		return -ENODEV;
+
+	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+	/* Look up important powerdomains, clockdomains */
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (!mpu_pwrdm)
+		pr_err("PM: mpu_pwrdm not found\n");
+
+	core_pwrdm = pwrdm_lookup("core_pwrdm");
+	if (!core_pwrdm)
+		pr_err("PM: core_pwrdm not found\n");
+
+	dsp_clkdm = clkdm_lookup("dsp_clkdm");
+	if (!dsp_clkdm)
+		pr_err("PM: mpu_clkdm not found\n");
+
+	gfx_clkdm = clkdm_lookup("gfx_clkdm");
+	if (!gfx_clkdm)
+		pr_err("PM: gfx_clkdm not found\n");
+
+
+	osc_ck = clk_get(NULL, "osc_ck");
+	if (IS_ERR(osc_ck)) {
+		printk(KERN_ERR "could not get osc_ck\n");
+		return -ENODEV;
+	}
+
+	if (cpu_is_omap242x()) {
+		emul_ck = clk_get(NULL, "emul_ck");
+		if (IS_ERR(emul_ck)) {
+			printk(KERN_ERR "could not get emul_ck\n");
+			clk_put(osc_ck);
+			return -ENODEV;
+		}
+	}
+
+	prcm_setup_regs();
+
+	/* Hack to prevent MPU retention when STI console is enabled. */
+	{
+		const struct omap_sti_console_config *sti;
+
+		sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+				      struct omap_sti_console_config);
+		if (sti != NULL && sti->enable)
+			sti_console_enabled = 1;
+	}
+
+	/*
+	 * We copy the assembler sleep/wakeup routines to SRAM.
+	 * These routines need to be in SRAM as that's the only
+	 * memory the MPU can see when it wakes up.
+	 */
+	if (cpu_is_omap24xx()) {
+		omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+						 omap24xx_idle_loop_suspend_sz);
+
+		omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+						    omap24xx_cpu_suspend_sz);
+	}
+
+	suspend_set_ops(&omap_pm_ops);
+	pm_idle = omap2_pm_idle;
+
+	return 0;
+}
+
+late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
new file mode 100644
index 00000000000..841d4c5ed8b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -0,0 +1,710 @@
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+	struct powerdomain *pwrdm;
+	u32 next_state;
+	u32 saved_state;
+	struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+	u32 wkst, irqstatus_mpu;
+	u32 fclk, iclk;
+
+	/* WKUP */
+	wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+		while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+	}
+
+	/* CORE */
+	wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+		fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+		prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+		while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+		cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+	}
+	wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+	if (wkst) {
+		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+		fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+		cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+		prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+		while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+			cpu_relax();
+		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+		cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	}
+
+	/* PER */
+	wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+	if (wkst) {
+		iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+		fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+		prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+		while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+			cpu_relax();
+		cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+		cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+	}
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		/* USBHOST */
+		wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+		if (wkst) {
+			iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_ICLKEN);
+			fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					       CM_FCLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_ICLKEN);
+			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+					    CM_FCLKEN);
+			prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+					  PM_WKST);
+			while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+						PM_WKST))
+				cpu_relax();
+			cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_ICLKEN);
+			cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+					 CM_FCLKEN);
+		}
+	}
+
+	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+			  OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+		cpu_relax();
+
+	return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+	/* Variable to tell what needs to be saved and restored
+	 * in omap_sram_idle*/
+	/* save_state = 0 => Nothing to save and restored */
+	/* save_state = 1 => Only L1 and logic lost */
+	/* save_state = 2 => Only L2 lost */
+	/* save_state = 3 => L1, L2 and logic lost */
+	int save_state = 0, mpu_next_state;
+
+	if (!_omap_sram_idle)
+		return;
+
+	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+	switch (mpu_next_state) {
+	case PWRDM_POWER_RET:
+		/* No need to save context */
+		save_state = 0;
+		break;
+	default:
+		/* Invalid state */
+		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+		return;
+	}
+	omap2_gpio_prepare_for_retention();
+	omap_uart_prepare_idle(0);
+	omap_uart_prepare_idle(1);
+	omap_uart_prepare_idle(2);
+
+	_omap_sram_idle(NULL, save_state);
+	cpu_init();
+
+	omap_uart_resume_idle(2);
+	omap_uart_resume_idle(1);
+	omap_uart_resume_idle(0);
+	omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+	u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+		fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+	fck_core1 = cm_read_mod_reg(CORE_MOD,
+				    CM_FCLKEN1);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		fck_core3 = cm_read_mod_reg(CORE_MOD,
+					    OMAP3430ES2_CM_FCLKEN3);
+		fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+					  CM_FCLKEN);
+		fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+					      CM_FCLKEN);
+	} else
+		fck_sgx = cm_read_mod_reg(GFX_MOD,
+					  OMAP3430ES2_CM_FCLKEN3);
+	fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+				  CM_FCLKEN);
+	fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+				  CM_FCLKEN);
+	fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+				  CM_FCLKEN);
+
+	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
+	fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+	fck_per &= ~OMAP3430_EN_UART3;
+
+	if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+	    fck_cam | fck_per | fck_usbhost)
+		return 1;
+	return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+	if (!omap_uart_can_sleep())
+		return 0;
+	if (omap3_fclks_active())
+		return 0;
+	return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+	u32 cur_state;
+	int sleep_switch = 0;
+	int ret = 0;
+
+	if (pwrdm == NULL || IS_ERR(pwrdm))
+		return -EINVAL;
+
+	while (!(pwrdm->pwrsts & (1 << state))) {
+		if (state == PWRDM_POWER_OFF)
+			return ret;
+		state--;
+	}
+
+	cur_state = pwrdm_read_next_pwrst(pwrdm);
+	if (cur_state == state)
+		return ret;
+
+	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+		sleep_switch = 1;
+		pwrdm_wait_transition(pwrdm);
+	}
+
+	ret = pwrdm_set_next_pwrst(pwrdm, state);
+	if (ret) {
+		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+		       pwrdm->name);
+		goto err;
+	}
+
+	if (sleep_switch) {
+		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		pwrdm_wait_transition(pwrdm);
+	}
+
+err:
+	return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!omap3_can_sleep())
+		goto out;
+
+	if (omap_irq_pending())
+		goto out;
+
+	omap_sram_idle();
+
+out:
+	local_fiq_enable();
+	local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+	disable_hlt();
+	return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+	struct power_state *pwrst;
+	int state, ret = 0;
+
+	/* Read current next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node)
+		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+	/* Set ones wanted by suspend */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+			goto restore;
+		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+			goto restore;
+	}
+
+	omap_uart_prepare_suspend();
+	omap_sram_idle();
+
+restore:
+	/* Restore next_pwrsts */
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+		if (state > pwrst->next_state) {
+			printk(KERN_INFO "Powerdomain (%s) didn't enter "
+			       "target state %d\n",
+			       pwrst->pwrdm->name, pwrst->next_state);
+			ret = -1;
+		}
+	}
+	if (ret)
+		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+	else
+		printk(KERN_INFO "Successfully put all powerdomains "
+		       "to target state\n");
+
+	return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap3_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+	enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap3_pm_prepare,
+	.enter		= omap3_pm_enter,
+	.finish		= omap3_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ *                   retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle.  This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+	/* ensure IVA2 clock is disabled */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* if no clock activity, nothing else to do */
+	if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+	      OMAP3430_CLKACTIVITY_IVA2_MASK))
+		return;
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Enable IVA2 clock */
+	cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+			 OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Set IVA2 boot mode to 'idle' */
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+	/* Un-reset IVA2 */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+	/* Disable IVA2 clock */
+	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Reset IVA2 */
+	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+			  OMAP3430_RST2_IVA2 |
+			  OMAP3430_RST3_IVA2,
+			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+	u16 mask, padconf;
+
+	/* In a stand alone OMAP3430 where there is not a stacked
+	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
+	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+	/* reset modem */
+	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+			  CORE_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+	/* XXX Reset all wkdeps. This should be done when initializing
+	 * powerdomains */
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+		prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	} else
+		prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+	/*
+	 * Enable interface clock autoidle for all modules.
+	 * Note that in the long run this should be done by clockfw
+	 */
+	cm_write_mod_reg(
+		OMAP3430_AUTO_MODEM |
+		OMAP3430ES2_AUTO_MMC3 |
+		OMAP3430ES2_AUTO_ICR |
+		OMAP3430_AUTO_AES2 |
+		OMAP3430_AUTO_SHA12 |
+		OMAP3430_AUTO_DES2 |
+		OMAP3430_AUTO_MMC2 |
+		OMAP3430_AUTO_MMC1 |
+		OMAP3430_AUTO_MSPRO |
+		OMAP3430_AUTO_HDQ |
+		OMAP3430_AUTO_MCSPI4 |
+		OMAP3430_AUTO_MCSPI3 |
+		OMAP3430_AUTO_MCSPI2 |
+		OMAP3430_AUTO_MCSPI1 |
+		OMAP3430_AUTO_I2C3 |
+		OMAP3430_AUTO_I2C2 |
+		OMAP3430_AUTO_I2C1 |
+		OMAP3430_AUTO_UART2 |
+		OMAP3430_AUTO_UART1 |
+		OMAP3430_AUTO_GPT11 |
+		OMAP3430_AUTO_GPT10 |
+		OMAP3430_AUTO_MCBSP5 |
+		OMAP3430_AUTO_MCBSP1 |
+		OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+		OMAP3430_AUTO_MAILBOXES |
+		OMAP3430_AUTO_OMAPCTRL |
+		OMAP3430ES1_AUTO_FSHOSTUSB |
+		OMAP3430_AUTO_HSOTGUSB |
+		OMAP3430_AUTO_SAD2D |
+		OMAP3430_AUTO_SSI,
+		CORE_MOD, CM_AUTOIDLE1);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_PKA |
+		OMAP3430_AUTO_AES1 |
+		OMAP3430_AUTO_RNG |
+		OMAP3430_AUTO_SHA11 |
+		OMAP3430_AUTO_DES1,
+		CORE_MOD, CM_AUTOIDLE2);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430_AUTO_MAD2D |
+			OMAP3430ES2_AUTO_USBTLL,
+			CORE_MOD, CM_AUTOIDLE3);
+	}
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_WDT2 |
+		OMAP3430_AUTO_WDT1 |
+		OMAP3430_AUTO_GPIO1 |
+		OMAP3430_AUTO_32KSYNC |
+		OMAP3430_AUTO_GPT12 |
+		OMAP3430_AUTO_GPT1 ,
+		WKUP_MOD, CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_DSS,
+		OMAP3430_DSS_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_CAM,
+		OMAP3430_CAM_MOD,
+		CM_AUTOIDLE);
+
+	cm_write_mod_reg(
+		OMAP3430_AUTO_GPIO6 |
+		OMAP3430_AUTO_GPIO5 |
+		OMAP3430_AUTO_GPIO4 |
+		OMAP3430_AUTO_GPIO3 |
+		OMAP3430_AUTO_GPIO2 |
+		OMAP3430_AUTO_WDT3 |
+		OMAP3430_AUTO_UART3 |
+		OMAP3430_AUTO_GPT9 |
+		OMAP3430_AUTO_GPT8 |
+		OMAP3430_AUTO_GPT7 |
+		OMAP3430_AUTO_GPT6 |
+		OMAP3430_AUTO_GPT5 |
+		OMAP3430_AUTO_GPT4 |
+		OMAP3430_AUTO_GPT3 |
+		OMAP3430_AUTO_GPT2 |
+		OMAP3430_AUTO_MCBSP4 |
+		OMAP3430_AUTO_MCBSP3 |
+		OMAP3430_AUTO_MCBSP2,
+		OMAP3430_PER_MOD,
+		CM_AUTOIDLE);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		cm_write_mod_reg(
+			OMAP3430ES2_AUTO_USBHOST,
+			OMAP3430ES2_USBHOST_MOD,
+			CM_AUTOIDLE);
+	}
+
+	/*
+	 * Set all plls to autoidle. This is needed until autoidle is
+	 * enabled by clockfw
+	 */
+	cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+			 OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+			 MPU_MOD,
+			 CM_AUTOIDLE2);
+	cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+			 (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+			 PLL_MOD,
+			 CM_AUTOIDLE);
+	cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+			 PLL_MOD,
+			 CM_AUTOIDLE2);
+
+	/*
+	 * Enable control of expternal oscillator through
+	 * sys_clkreq. In the long run clock framework should
+	 * take care of this.
+	 */
+	prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+			     OMAP3430_GR_MOD,
+			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+	/* setup wakup source */
+	prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+			  OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+			  WKUP_MOD, PM_WKEN);
+	/* No need to write EN_IO, that is always enabled */
+	prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+			  OMAP3430_EN_GPT12,
+			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+	/* For some reason IO doesn't generate wakeup event even if
+	 * it is selected to mpu wakeup goup */
+	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	omap3_iva_idle();
+	omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+	struct power_state *pwrst;
+
+	if (!pwrdm->pwrsts)
+		return 0;
+
+	pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+	if (!pwrst)
+		return -ENOMEM;
+	pwrst->pwrdm = pwrdm;
+	pwrst->next_state = PWRDM_POWER_RET;
+	list_add(&pwrst->node, &pwrst_list);
+
+	if (pwrdm_has_hdwr_sar(pwrdm))
+		pwrdm_enable_hdwr_sar(pwrdm);
+
+	return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+		omap2_clkdm_allow_idle(clkdm);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+		 atomic_read(&clkdm->usecount) == 0)
+		omap2_clkdm_sleep(clkdm);
+	return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+	struct power_state *pwrst, *tmp;
+	int ret;
+
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
+	printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+	/* XXX prcm_setup_regs needs to be before enabling hw
+	 * supervised mode for powerdomains */
+	prcm_setup_regs();
+
+	ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+			  (irq_handler_t)prcm_interrupt_handler,
+			  IRQF_DISABLED, "prcm", NULL);
+	if (ret) {
+		printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+		       INT_34XX_PRCM_MPU_IRQ);
+		goto err1;
+	}
+
+	ret = pwrdm_for_each(pwrdms_setup);
+	if (ret) {
+		printk(KERN_ERR "Failed to setup powerdomains\n");
+		goto err2;
+	}
+
+	(void) clkdm_for_each(clkdms_setup);
+
+	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+	if (mpu_pwrdm == NULL) {
+		printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+		goto err2;
+	}
+
+	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+					 omap34xx_cpu_suspend_sz);
+
+	suspend_set_ops(&omap_pm_ops);
+
+	pm_idle = omap3_pm_idle;
+
+err1:
+	return ret;
+err2:
+	free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+		list_del(&pwrst->node);
+		kfree(pwrst);
+	}
+	return ret;
+}
+
+late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 812d50ee495..cb1ae84e092 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -276,6 +276,8 @@
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP3430_EN_GPIO1				(1 << 3)
 #define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
 #define OMAP3430_EN_GPT1				(1 << 0)
 #define OMAP3430_EN_GPT1_SHIFT				0
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 826d326b806..9937e281469 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -16,17 +16,12 @@
 
 #include "prcm-common.h"
 
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg)					\
-			IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
 #define OMAP2420_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
 
 /*
  * Architecture-specific global PRM registers
@@ -38,80 +33,132 @@
  *
  */
 
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET		0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET	0x0080
-
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD,	\
-						OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS	OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3430_PRM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3430_PRM_VC_SMPS_SA		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3430_PRM_CLKSEL		OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP2_PRCM_REVISION_OFFSET	0x0000
+#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
+#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
+#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
+#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
+#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
+#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
+#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3_PRM_REVISION_OFFSET	0x0004
+#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
+#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
+#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
+#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
+#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET	0x0058
+#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
+#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
+#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
+#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
+#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
+#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
+#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
+#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
+#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
+#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
+#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
+#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
 
 /*
  * Module specific PRM registers from PRM_BASE + domain offset
@@ -156,9 +203,11 @@
 
 #define OMAP3430_PM_MPUGRPSEL				0x00a4
 #define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
 
 #define OMAP3430_PM_IVAGRPSEL				0x00a8
 #define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
 
 #define OMAP3430_PM_PREPWSTST				0x00e8
 
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 00000000000..02e1c2d4705
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 00000000000..3751d293cb1
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2a30060cb4b..2045441e838 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params;
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT		3
+#define SDRC_POWER_PWDENA_SHIFT			2
+#define SDRC_POWER_PAGEPOLICY_SHIFT		0
 
 /**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
@@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
 {
 	struct omap_sdrc_params *sp;
 
+	if (!sdrc_init_params)
+		return NULL;
+
 	sp = sdrc_init_params;
 
-	while (sp->rate != r)
+	while (sp->rate && sp->rate != r)
 		sp++;
 
 	if (!sp->rate)
@@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 	omap2_sms_base = omap2_globals->sms;
 }
 
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
 void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 {
 	u32 l;
@@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
 
 	sdrc_init_params = sp;
+
+	/* XXX Enable SRFRONIDLEREQ here also? */
+	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+		(1 << SDRC_POWER_PWDENA_SHIFT) |
+		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+	sdrc_write_reg(l, SDRC_POWER);
 }
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0afdad5ae9f..feaec7eaf6b 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 	m_type = omap2xxx_sdrc_get_type();
 
 	local_irq_save(flags);
-	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	if (cpu_is_omap2420())
+		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+	else
+		__raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
 	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
 	curr_perf_level = level;
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c285b..b094c15bfe4 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -6,8 +6,13 @@
  * Copyright (C) 2005-2008 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
+ * Major rework for PM support by Kevin Hilman
+ *
  * Based off of arch/arm/mach-omap/omap1/serial.c
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -21,9 +26,50 @@
 
 #include <mach/common.h>
 #include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER		0x17	/* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
 
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+struct omap_uart_state {
+	int num;
+	int can_sleep;
+	struct timer_list timer;
+	u32 timeout;
+
+	void __iomem *wk_st;
+	void __iomem *wk_en;
+	u32 wk_mask;
+	u32 padconf;
+
+	struct clk *ick;
+	struct clk *fck;
+	int clocked;
+
+	struct plat_serial8250_port *p;
+	struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+	int context_valid;
+
+	/* Registers to be saved/restored for OFF-mode */
+	u16 dll;
+	u16 dlh;
+	u16 ier;
+	u16 sysc;
+	u16 scr;
+	u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
@@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
  * properly. Note that the TX watermark initialization may not be needed
  * once the 8250.c watermark handling code is merged.
  */
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
+	struct plat_serial8250_port *p = uart->p;
+
 	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
 	serial_write_reg(p, UART_OMAP_SCR, 0x08);
 	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
 	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
 }
 
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
 {
-	int i;
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		if (uart_ick[i] && uart_fck[i]) {
-			if (enable) {
-				clk_enable(uart_ick[i]);
-				clk_enable(uart_fck[i]);
-			} else {
-				clk_disable(uart_ick[i]);
-				clk_disable(uart_fck[i]);
+	u16 lcr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	lcr = serial_read_reg(p, UART_LCR);
+	serial_write_reg(p, UART_LCR, 0xBF);
+	uart->dll = serial_read_reg(p, UART_DLL);
+	uart->dlh = serial_read_reg(p, UART_DLM);
+	serial_write_reg(p, UART_LCR, lcr);
+	uart->ier = serial_read_reg(p, UART_IER);
+	uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+	uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+	uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+	uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+	u16 efr = 0;
+	struct plat_serial8250_port *p = uart->p;
+
+	if (!enable_off_mode)
+		return;
+
+	if (!uart->context_valid)
+		return;
+
+	uart->context_valid = 0;
+
+	serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	efr = serial_read_reg(p, UART_EFR);
+	serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, 0x0);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_DLL, uart->dll);
+	serial_write_reg(p, UART_DLM, uart->dlh);
+	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(p, UART_IER, uart->ier);
+	serial_write_reg(p, UART_FCR, 0xA1);
+	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(p, UART_EFR, efr);
+	serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+	serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+	serial_write_reg(p, UART_OMAP_WER, uart->wer);
+	serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+	serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+	if (uart->clocked)
+		return;
+
+	clk_enable(uart->ick);
+	clk_enable(uart->fck);
+	uart->clocked = 1;
+	omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_save_context(uart);
+	uart->clocked = 0;
+	clk_disable(uart->ick);
+	clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+					  int enable)
+{
+	struct plat_serial8250_port *p = uart->p;
+	u16 sysc;
+
+	sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+	if (enable)
+		sysc |= 0x2 << 3;
+	else
+		sysc |= 0x1 << 3;
+
+	serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+	omap_uart_enable_clocks(uart);
+
+	omap_uart_smart_idle_enable(uart, 0);
+	uart->can_sleep = 0;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+	if (!uart->clocked)
+		return;
+
+	omap_uart_smart_idle_enable(uart, 1);
+	uart->can_sleep = 1;
+	del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+	struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+	omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num && uart->can_sleep) {
+			omap_uart_disable_clocks(uart);
+			return;
+		}
+	}
+}
+
+void omap_uart_resume_idle(int num)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (num == uart->num) {
+			omap_uart_enable_clocks(uart);
+
+			/* Check for IO pad wakeup */
+			if (cpu_is_omap34xx() && uart->padconf) {
+				u16 p = omap_ctrl_readw(uart->padconf);
+
+				if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+					omap_uart_block_sleep(uart);
 			}
+
+			/* Check for normal UART wakeup */
+			if (__raw_readl(uart->wk_st) & uart->wk_mask)
+				omap_uart_block_sleep(uart);
+
+			return;
 		}
 	}
 }
 
+void omap_uart_prepare_suspend(void)
+{
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		omap_uart_allow_sleep(uart);
+	}
+}
+
+int omap_uart_can_sleep(void)
+{
+	struct omap_uart_state *uart;
+	int can_sleep = 1;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (!uart->clocked)
+			continue;
+
+		if (!uart->can_sleep) {
+			can_sleep = 0;
+			continue;
+		}
+
+		/* This UART can now safely sleep. */
+		omap_uart_allow_sleep(uart);
+	}
+
+	return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred.  It does _nothing_ to handle the interrupt.  Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+	struct omap_uart_state *uart = dev_id;
+
+	omap_uart_block_sleep(uart);
+
+	return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+	u32 v;
+	struct plat_serial8250_port *p = uart->p;
+	int ret;
+
+	uart->can_sleep = 0;
+	uart->timeout = sleep_timeout;
+	setup_timer(&uart->timer, omap_uart_idle_timer,
+		    (unsigned long) uart);
+	mod_timer(&uart->timer, jiffies + uart->timeout);
+	omap_uart_smart_idle_enable(uart, 0);
+
+	if (cpu_is_omap34xx()) {
+		u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+		u32 wk_mask = 0;
+		u32 padconf = 0;
+
+		uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+		uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP3430_ST_UART1_MASK;
+			padconf = 0x182;
+			break;
+		case 1:
+			wk_mask = OMAP3430_ST_UART2_MASK;
+			padconf = 0x17a;
+			break;
+		case 2:
+			wk_mask = OMAP3430_ST_UART3_MASK;
+			padconf = 0x19e;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+		uart->padconf = padconf;
+	} else if (cpu_is_omap24xx()) {
+		u32 wk_mask = 0;
+
+		if (cpu_is_omap2430()) {
+			uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		} else if (cpu_is_omap2420()) {
+			uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+			uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+		}
+		switch (uart->num) {
+		case 0:
+			wk_mask = OMAP24XX_ST_UART1_MASK;
+			break;
+		case 1:
+			wk_mask = OMAP24XX_ST_UART2_MASK;
+			break;
+		case 2:
+			wk_mask = OMAP24XX_ST_UART3_MASK;
+			break;
+		}
+		uart->wk_mask = wk_mask;
+	} else {
+		uart->wk_en = 0;
+		uart->wk_st = 0;
+		uart->wk_mask = 0;
+		uart->padconf = 0;
+	}
+
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v;
+
+		v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+
+	p->flags |= UPF_SHARE_IRQ;
+	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+			  "serial idle", (void *)uart);
+	WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	struct omap_uart_state *uart;
+	unsigned int value;
+
+	if (sscanf(buf, "%u", &value) != 1) {
+		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+		return -EINVAL;
+	}
+	sleep_timeout = value * HZ;
+	list_for_each_entry(uart, &uart_list, node) {
+		uart->timeout = sleep_timeout;
+		if (uart->timeout)
+			mod_timer(&uart->timer, jiffies + uart->timeout);
+		else
+			/* A zero value means disable timeout feature */
+			omap_uart_block_sleep(uart);
+	}
+	return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
 void __init omap_serial_init(void)
 {
-	int i;
+	int i, err;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -114,9 +496,14 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
+	if (cpu_is_omap44xx()) {
+		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+			serial_platform_data[i].irq += 32;
+	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct plat_serial8250_port *p = serial_platform_data + i;
+		struct omap_uart_state *uart = &omap_uart[i];
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -125,35 +512,39 @@ void __init omap_serial_init(void)
 		}
 
 		sprintf(name, "uart%d_ick", i+1);
-		uart_ick[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_ick[i])) {
+		uart->ick = clk_get(NULL, name);
+		if (IS_ERR(uart->ick)) {
 			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
-			uart_ick[i] = NULL;
-		} else
-			clk_enable(uart_ick[i]);
+			uart->ick = NULL;
+		}
 
 		sprintf(name, "uart%d_fck", i+1);
-		uart_fck[i] = clk_get(NULL, name);
-		if (IS_ERR(uart_fck[i])) {
+		uart->fck = clk_get(NULL, name);
+		if (IS_ERR(uart->fck)) {
 			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
-			uart_fck[i] = NULL;
-		} else
-			clk_enable(uart_fck[i]);
+			uart->fck = NULL;
+		}
 
-		omap_serial_reset(p);
+		if (!uart->ick || !uart->fck)
+			continue;
+
+		uart->num = i;
+		p->private_data = uart;
+		uart->p = p;
+		list_add(&uart->node, &uart_list);
+
+		omap_uart_enable_clocks(uart);
+		omap_uart_reset(uart);
+		omap_uart_idle_init(uart);
 	}
-}
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
+	err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+	if (!err)
+		err = sysfs_create_file(&serial_device.dev.kobj,
+					&sleep_timeout_attr.attr);
+#endif
 
-static int __init omap_init(void)
-{
-	return platform_device_register(&serial_device);
 }
-arch_initcall(omap_init);
+
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index bf9e96105e1..130aadbfa08 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,7 +28,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/pm.h>
 
 #include <mach/omap24xx.h>
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
new file mode 100644
index 00000000000..e5e2553e79a
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
+				OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P	OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
+				       * available */
+#define SCRATCHPAD_BASE_P	OMAP343X_CTRL_REGADDR(\
+				OMAP343X_CONTROL_MEM_WKUP +\
+				SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+	.text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+        stmfd   sp!, {lr}     @ save registers on stack
+	adr	r0, restore
+        ldmfd   sp!, {pc}     @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+        .word   . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ *	 wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
+loop:
+	/*b	loop*/	@Enable to debug by stepping through code
+	/* r0 contains restore pointer in sdram */
+	/* r1 contains information about saving context */
+	ldr     r4, sdrc_power          @ read the SDRC_POWER register
+	ldr     r5, [r4]                @ read the contents of SDRC_POWER
+	orr     r5, r5, #0x40           @ enable self refresh on idle req
+	str     r5, [r4]                @ write back to SDRC_POWER register
+
+	cmp	r1, #0x0
+	/* If context save is required, do that and execute wfi */
+	bne	save_context_wfi
+	/* Data memory barrier and Data sync barrier */
+	mov	r1, #0
+	mcr	p15, 0, r1, c7, c10, 4
+	mcr	p15, 0, r1, c7, c10, 5
+
+	wfi				@ wait for interrupt
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+restore:
+	/* b restore*/ 	@ Enable to debug restore code
+        /* Check what was the reason for mpu reset and store the reason in r9*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost - In this case, we wont be here */
+        /* 3 - Both L1 and L2 lost */
+	ldr     r1, pm_pwstctrl_mpu
+	ldr	r2, [r1]
+	and     r2, r2, #0x3
+	cmp     r2, #0x0	@ Check if target power state was OFF or RET
+        moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
+	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
+	bne	logic_l1_restore
+	/* Execute smi to invalidate L2 cache */
+	mov r12, #0x1                         @ set up to invalide L2
+smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
+logic_l1_restore:
+	mov	r1, #0
+	/* Invalidate all instruction caches to PoU
+	 * and flush branch target cache */
+	mcr	p15, 0, r1, c7, c5, 0
+
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldmia	r3!, {r4-r6}
+	mov	sp, r4
+	msr	spsr_cxsf, r5
+	mov	lr, r6
+
+	ldmia	r3!, {r4-r9}
+	/* Coprocessor access Control Register */
+	mcr p15, 0, r4, c1, c0, 2
+
+	/* TTBR0 */
+	MCR p15, 0, r5, c2, c0, 0
+	/* TTBR1 */
+	MCR p15, 0, r6, c2, c0, 1
+	/* Translation table base control register */
+	MCR p15, 0, r7, c2, c0, 2
+	/*domain access Control Register */
+	MCR p15, 0, r8, c3, c0, 0
+	/* data fault status Register */
+	MCR p15, 0, r9, c5, c0, 0
+
+	ldmia  r3!,{r4-r8}
+	/* instruction fault status Register */
+	MCR p15, 0, r4, c5, c0, 1
+	/*Data Auxiliary Fault Status Register */
+	MCR p15, 0, r5, c5, c1, 0
+	/*Instruction Auxiliary Fault Status Register*/
+	MCR p15, 0, r6, c5, c1, 1
+	/*Data Fault Address Register */
+	MCR p15, 0, r7, c6, c0, 0
+	/*Instruction Fault Address Register*/
+	MCR p15, 0, r8, c6, c0, 2
+	ldmia  r3!,{r4-r7}
+
+	/* user r/w thread and process ID */
+	MCR p15, 0, r4, c13, c0, 2
+	/* user ro thread and process ID */
+	MCR p15, 0, r5, c13, c0, 3
+	/*Privileged only thread and process ID */
+	MCR p15, 0, r6, c13, c0, 4
+	/* cache size selection */
+	MCR p15, 2, r7, c0, c0, 0
+	ldmia  r3!,{r4-r8}
+	/* Data TLB lockdown registers */
+	MCR p15, 0, r4, c10, c0, 0
+	/* Instruction TLB lockdown registers */
+	MCR p15, 0, r5, c10, c0, 1
+	/* Secure or Nonsecure Vector Base Address */
+	MCR p15, 0, r6, c12, c0, 0
+	/* FCSE PID */
+	MCR p15, 0, r7, c13, c0, 0
+	/* Context PID */
+	MCR p15, 0, r8, c13, c0, 1
+
+	ldmia  r3!,{r4-r5}
+	/* primary memory remap register */
+	MCR p15, 0, r4, c10, c2, 0
+	/*normal memory remap register */
+	MCR p15, 0, r5, c10, c2, 1
+
+	/* Restore cpsr */
+	ldmia	r3!,{r4}	/*load CPSR from SDRAM*/
+	msr	cpsr, r4	/*store cpsr */
+
+	/* Enabling MMU here */
+	mrc	p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+	and	r7, #0x7
+	cmp	r7, #0x0
+	beq	usettbr0
+ttbr_error:
+	/* More work needs to be done to support N[0:2] value other than 0
+	* So looping here so that the error can be detected
+	*/
+	b	ttbr_error
+usettbr0:
+	mrc	p15, 0, r2, c2, c0, 0
+	ldr	r5, ttbrbit_mask
+	and	r2, r5
+	mov	r4, pc
+	ldr	r5, table_index_mask
+	and	r4, r5 /* r4 = 31 to 20 bits of pc */
+	/* Extract the value to be written to table entry */
+	ldr	r1, table_entry
+	add	r1, r1, r4 /* r1 has value to be written to table entry*/
+	/* Getting the address of table entry to modify */
+	lsr	r4, #18
+	add	r2, r4 /* r2 has the location which needs to be modified */
+	/* Storing previous entry of location being modified */
+	ldr	r5, scratchpad_base
+	ldr	r4, [r2]
+	str	r4, [r5, #0xC0]
+	/* Modify the table entry */
+	str	r1, [r2]
+	/* Storing address of entry being modified
+	 * - will be restored after enabling MMU */
+	ldr	r5, scratchpad_base
+	str	r2, [r5, #0xC4]
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 4	@ Flush prefetch buffer
+	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
+	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
+	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
+	/* Restore control register  but dont enable caches here*/
+	/* Caches will be enabled after restoring MMU table entry */
+	ldmia	r3!, {r4}
+	/* Store previous value of control register in scratchpad */
+	str	r4, [r5, #0xC8]
+	ldr	r2, cache_pred_disable_mask
+	and	r4, r2
+	mcr	p15, 0, r4, c1, c0, 0
+
+	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+save_context_wfi:
+	/*b	save_context_wfi*/	@ enable to debug save code
+	mov	r8, r0 /* Store SDRAM address in r8 */
+        /* Check what that target sleep state is:stored in r1*/
+        /* 1 - Only L1 and logic lost */
+        /* 2 - Only L2 lost */
+        /* 3 - Both L1 and L2 lost */
+	cmp	r1, #0x2 /* Only L2 lost */
+	beq	clean_l2
+	cmp	r1, #0x1 /* L2 retained */
+	/* r9 stores whether to clean L2 or not*/
+	moveq	r9, #0x0 /* Dont Clean L2 */
+	movne	r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+	/* Store sp and spsr to SDRAM */
+	mov	r4, sp
+	mrs	r5, spsr
+	mov	r6, lr
+	stmia	r8!, {r4-r6}
+	/* Save all ARM registers */
+	/* Coprocessor access control register */
+	mrc	p15, 0, r6, c1, c0, 2
+	stmia	r8!, {r6}
+	/* TTBR0, TTBR1 and Translation table base control */
+	mrc	p15, 0, r4, c2, c0, 0
+	mrc	p15, 0, r5, c2, c0, 1
+	mrc	p15, 0, r6, c2, c0, 2
+	stmia	r8!, {r4-r6}
+	/* Domain access control register, data fault status register,
+	and instruction fault status register */
+	mrc	p15, 0, r4, c3, c0, 0
+	mrc	p15, 0, r5, c5, c0, 0
+	mrc	p15, 0, r6, c5, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Data aux fault status register, instruction aux fault status,
+	datat fault address register and instruction fault address register*/
+	mrc	p15, 0, r4, c5, c1, 0
+	mrc	p15, 0, r5, c5, c1, 1
+	mrc	p15, 0, r6, c6, c0, 0
+	mrc	p15, 0, r7, c6, c0, 2
+	stmia	r8!, {r4-r7}
+	/* user r/w thread and process ID, user r/o thread and process ID,
+	priv only thread and process ID, cache size selection */
+	mrc	p15, 0, r4, c13, c0, 2
+	mrc	p15, 0, r5, c13, c0, 3
+	mrc	p15, 0, r6, c13, c0, 4
+	mrc	p15, 2, r7, c0, c0, 0
+	stmia	r8!, {r4-r7}
+	/* Data TLB lockdown, instruction TLB lockdown registers */
+	mrc	p15, 0, r5, c10, c0, 0
+	mrc	p15, 0, r6, c10, c0, 1
+	stmia	r8!, {r5-r6}
+	/* Secure or non secure vector base address, FCSE PID, Context PID*/
+	mrc	p15, 0, r4, c12, c0, 0
+	mrc	p15, 0, r5, c13, c0, 0
+	mrc	p15, 0, r6, c13, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Primary remap, normal remap registers */
+	mrc	p15, 0, r4, c10, c2, 0
+	mrc	p15, 0, r5, c10, c2, 1
+	stmia	r8!,{r4-r5}
+
+	/* Store current cpsr*/
+	mrs	r2, cpsr
+	stmia	r8!, {r2}
+
+	mrc	p15, 0, r4, c1, c0, 0
+	/* save control register */
+	stmia	r8!, {r4}
+clean_caches:
+	/* Clean Data or unified cache to POU*/
+	/* How to invalidate only L1 cache???? - #FIX_ME# */
+	/* mcr	p15, 0, r11, c7, c11, 1 */
+	cmp	r9, #1 /* Check whether L2 inval is required or not*/
+	bne	skip_l2_inval
+clean_l2:
+	/* read clidr */
+	mrc     p15, 1, r0, c0, c0, 1
+	/* extract loc from clidr */
+	ands    r3, r0, #0x7000000
+	/* left align loc bit field */
+	mov     r3, r3, lsr #23
+	/* if loc is 0, then no need to clean */
+	beq     finished
+	/* start clean at cache level 0 */
+	mov     r10, #0
+loop1:
+	/* work out 3x current cache level */
+	add     r2, r10, r10, lsr #1
+	/* extract cache type bits from clidr*/
+	mov     r1, r0, lsr r2
+	/* mask of the bits for current cache only */
+	and     r1, r1, #7
+	/* see what cache we have at this level */
+	cmp     r1, #2
+	/* skip if no cache, or just i-cache */
+	blt     skip
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	/* isb to sych the new cssr&csidr */
+	isb
+	/* read the new csidr */
+	mrc     p15, 1, r1, c0, c0, 0
+	/* extract the length of the cache lines */
+	and     r2, r1, #7
+	/* add 4 (line length offset) */
+	add     r2, r2, #4
+	ldr     r4, assoc_mask
+	/* find maximum number on the way size */
+	ands    r4, r4, r1, lsr #3
+	/* find bit position of way size increment */
+	clz     r5, r4
+	ldr     r7, numset_mask
+	/* extract max number of the index size*/
+	ands    r7, r7, r1, lsr #13
+loop2:
+	mov     r9, r4
+	/* create working copy of max way size*/
+loop3:
+	/* factor way and cache number into r11 */
+	orr     r11, r10, r9, lsl r5
+	/* factor index number into r11 */
+	orr     r11, r11, r7, lsl r2
+	/*clean & invalidate by set/way */
+	mcr     p15, 0, r11, c7, c10, 2
+	/* decrement the way*/
+	subs    r9, r9, #1
+	bge     loop3
+	/*decrement the index */
+	subs    r7, r7, #1
+	bge     loop2
+skip:
+	add     r10, r10, #2
+	/* increment cache number */
+	cmp     r3, r10
+	bgt     loop1
+finished:
+	/*swith back to cache level 0 */
+	mov     r10, #0
+	/* select current cache level in cssr */
+	mcr     p15, 2, r10, c0, c0, 0
+	isb
+skip_l2_inval:
+	/* Data memory barrier and Data sync barrier */
+	mov     r1, #0
+	mcr     p15, 0, r1, c7, c10, 4
+	mcr     p15, 0, r1, c7, c10, 5
+
+	wfi                             @ wait for interrupt
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bl i_dll_wait
+	/* restore regs and return */
+	ldmfd   sp!, {r0-r12, pc}
+
+i_dll_wait:
+	ldr     r4, clk_stabilize_delay
+
+i_dll_delay:
+	subs    r4, r4, #0x1
+	bne     i_dll_delay
+	ldr     r4, sdrc_power
+	ldr     r5, [r4]
+	bic     r5, r5, #0x40
+	str     r5, [r4]
+	bx	lr
+pm_prepwstst_core:
+	.word	PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+	.word	PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+	.word	PM_PWSTCTRL_MPU_P
+scratchpad_base:
+	.word	SCRATCHPAD_BASE_P
+sdrc_power:
+	.word SDRC_POWER_V
+context_mem:
+	.word	0x803E3E14
+clk_stabilize_delay:
+	.word 0x000001FF
+assoc_mask:
+	.word	0x3ff
+numset_mask:
+	.word	0x7fff
+ttbrbit_mask:
+	.word	0xFFFFC000
+table_index_mask:
+	.word	0xFFF00000
+table_entry:
+	.word	0x00000C02
+cache_pred_disable_mask:
+	.word	0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index af4bd349022..bb299851116 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll:
 omap242x_sdi_sdrc_dlla_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap242x_sdi_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl:
 omap242x_srs_sdrc_rfr_ctrl:
 	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap242x_srs_prcm_voltctrl:
-	.word OMAP242X_PRCM_VOLTCTRL
+	.word OMAP2420_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap242x_ssp_set_config:
-	.word OMAP242X_PRCM_CLKCFG_CTRL
+	.word OMAP2420_PRCM_CLKCFG_CTRL
 omap242x_ssp_pll_ctl:
 	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap242x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 84363e269e8..9955abcaeb3 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll:
 omap243x_sdi_sdrc_dlla_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 omap243x_sdi_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl:
 omap243x_srs_sdrc_rfr_ctrl:
 	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 omap243x_srs_prcm_voltctrl:
-	.word OMAP243X_PRCM_VOLTCTRL
+	.word OMAP2430_PRCM_VOLTCTRL
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 omap243x_ssp_set_config:
-	.word OMAP243X_PRCM_CLKCFG_CTRL
+	.word OMAP2430_PRCM_CLKCFG_CTRL
 omap243x_ssp_pll_ctl:
 	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
 omap243x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2c714613634..c080c82521e 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -40,69 +40,74 @@
 /*
  * Change frequency of core dpll
  * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ *      SDRC rates < 83MHz
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
+	ldr	r4, [sp, #52]		@ pull extra args off the stack
+	dsb				@ flush buffered writes to interconnect
 	cmp	r3, #0x2
 	blne	configure_sdrc
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	unlock_dll
 	blne	lock_dll
-	cmp	r3, #0x1
-	blne	unlock_dll
 	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
 	bl 	configure_core_dpll
 	bl	enable_sdrc
-	cmp	r3, #0x1
-	blne	wait_dll_unlock
-	cmp	r3, #0x2
+	cmp	r4, #0x1
+	bleq	wait_dll_unlock
 	blne	wait_dll_lock
 	cmp	r3, #0x1
 	blne	configure_sdrc
+	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
 	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
 unlock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	orr	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	orr	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 lock_dll:
-	ldr	r4, omap3_sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	bic	r5, r5, #0x4
-	str	r5, [r4]
+	ldr	r11, omap3_sdrc_dlla_ctrl
+	ldr	r12, [r11]
+	bic	r12, r12, #0x4
+	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 sdram_in_selfrefresh:
-	mov	r5, #0x0		@ Move 0 to R5
-	mcr	p15, 0, r5, c7, c10, 5	@ memory barrier
-	ldr	r4, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r5, [r4]		@ read the contents of SDRC_POWER
-	orr 	r5, r5, #0x40		@ enable self refresh on idle req
-	str 	r5, [r4]		@ write back to SDRC_POWER register
-	ldr	r4, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r5, [r4]
-	bic	r5, r5, #0x2		@ disable iclk bit for SRDC
-	str 	r5, [r4]
+	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
+	ldr	r12, [r11]		@ read the contents of SDRC_POWER
+	mov	r9, r12			@ keep a copy of SDRC_POWER bits
+	orr 	r12, r12, #0x40		@ enable self refresh on idle req
+	bic 	r12, r12, #0x4		@ clear PWDENA
+	str 	r12, [r11]		@ write back to SDRC_POWER register
+	ldr	r12, [r11]		@ posted-write barrier for SDRC
+	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
+	ldr	r12, [r11]
+	bic	r12, r12, #0x2		@ disable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr 	r5, [r4]
-	and 	r5, r5, #0x2		@ check for SDRC idle
-	cmp 	r5, #2
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr 	r12, [r11]
+	and 	r12, r12, #0x2		@ check for SDRC idle
+	cmp 	r12, #2
 	bne 	wait_sdrc_idle
 	bx 	lr
 configure_core_dpll:
-	ldr 	r4, omap3_cm_clksel1_pll
-	ldr	r5, [r4]
-	ldr	r6, core_m2_mask_val	@ modify m2 for core dpll
-	and	r5, r5, r6
-	orr	r5, r5, r3, lsl #0x1B	@ r3 contains the M2 val
-	str	r5, [r4]
-	mov 	r5, #0x800		@ wait for the clock to stabilise
+	ldr 	r11, omap3_cm_clksel1_pll
+	ldr	r12, [r11]
+	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
+	and	r12, r12, r10
+	orr	r12, r12, r3, lsl #0x1B	@ r3 contains the M2 val
+	str	r12, [r11]
+	ldr	r12, [r11]		@ posted-write barrier for CM
+	mov 	r12, #0x800		@ wait for the clock to stabilise
 	cmp	r3, #2
 	bne	wait_clk_stable
 	bx	lr
 wait_clk_stable:
-	subs 	r5, r5, #1
+	subs 	r12, r12, #1
 	bne	wait_clk_stable
 	nop
 	nop
@@ -116,42 +121,42 @@ wait_clk_stable:
 	nop
 	bx	lr
 enable_sdrc:
-	ldr 	r4, omap3_cm_iclken1_core
-	ldr	r5, [r4]
-	orr 	r5, r5, #0x2		@ enable iclk bit for SDRC
-	str 	r5, [r4]
+	ldr 	r11, omap3_cm_iclken1_core
+	ldr	r12, [r11]
+	orr 	r12, r12, #0x2		@ enable iclk bit for SDRC
+	str 	r12, [r11]
 wait_sdrc_idle1:
-	ldr 	r4, omap3_cm_idlest1_core
-	ldr	r5, [r4]
-	and 	r5, r5, #0x2
-	cmp	r5, #0
+	ldr 	r11, omap3_cm_idlest1_core
+	ldr	r12, [r11]
+	and 	r12, r12, #0x2
+	cmp	r12, #0
 	bne	wait_sdrc_idle1
-	ldr	r4, omap3_sdrc_power
-	ldr	r5, [r4]
-	bic 	r5, r5, #0x40
-	str 	r5, [r4]
+restore_sdrc_power_val:
+	ldr	r11, omap3_sdrc_power
+	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
 	bx	lr
 wait_dll_lock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and 	r5, r5, #0x4
-	cmp	r5, #0x4
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and 	r12, r12, #0x4
+	cmp	r12, #0x4
 	bne	wait_dll_lock
 	bx	lr
 wait_dll_unlock:
-	ldr	r4, omap3_sdrc_dlla_status
-	ldr	r5, [r4]
-	and	r5, r5, #0x4
-	cmp	r5, #0x0
+	ldr	r11, omap3_sdrc_dlla_status
+	ldr	r12, [r11]
+	and	r12, r12, #0x4
+	cmp	r12, #0x0
 	bne	wait_dll_unlock
 	bx	lr
 configure_sdrc:
-	ldr	r4, omap3_sdrc_rfr_ctrl
-	str	r0, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrla
-	str	r1, [r4]
-	ldr	r4, omap3_sdrc_actim_ctrlb
-	str	r2, [r4]
+	ldr	r11, omap3_sdrc_rfr_ctrl
+	str	r0, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrla
+	str	r1, [r11]
+	ldr	r11, omap3_sdrc_actim_ctrlb
+	str	r2, [r11]
+	ldr	r2, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba12090..97eeeebcb06 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
  *
  * Some parts based off of TI's 24xx code:
  *
- *   Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
  *
  * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file "COPYING" in the main directory of this archive
@@ -37,6 +38,7 @@
 
 #include <asm/mach/time.h>
 #include <mach/dmtimer.h>
+#include <asm/localtimer.h>
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
@@ -82,7 +84,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 		period -= 1;
-
+		if (cpu_is_omap44xx())
+			period = 0xff;	/* FIXME: */
 		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +148,9 @@ static void __init omap2_gp_clockevent_init(void)
 		     "timer-gp: omap_dm_timer_set_source() failed\n");
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+	if (cpu_is_omap44xx())
+		/* Assuming 32kHz clk is driving GPT1 */
+		tick_rate = 32768;	/* FIXME: */
 
 	pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
 		gptimer_id, tick_rate);
@@ -224,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void)
 
 static void __init omap2_gp_timer_init(void)
 {
+#ifdef CONFIG_LOCAL_TIMERS
+	twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+#endif
 	omap_dm_timer_init();
 
 	omap2_gp_clockevent_init();
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
new file mode 100644
index 00000000000..c1a650a9910
--- /dev/null
+++ b/arch/arm/mach-omap2/timer-mpu.c
@@ -0,0 +1,34 @@
+/*
+ * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
+ * own timer in it's MPU domain. These timers will be driving the
+ * linux kernel SMP tick framework when active. These timers are not
+ * part of the wake up domain.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is based on arm realview smp platform file.
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = INT_44XX_LOCALTIMER_IRQ;
+	twd_timer_setup(evt);
+}
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 34a56a136ef..d85296dc896 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,10 +28,20 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pm.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
 
+#define OTG_SYSCONFIG	(OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+	/* Ensure force-idle mode for OTG controller */
+	if (cpu_is_omap34xx())
+		omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
 static struct resource musb_resources[] = {
 	[0] = { /* start and end set dynamically */
 		.flags	= IORESOURCE_MEM,
@@ -184,4 +194,13 @@ void __init usb_musb_init(void)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
+
+	usb_musb_pm_init();
+}
+
+#else
+void __init usb_musb_init(void)
+{
+	usb_musb_pm_init();
 }
+#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index c14d1213727..6f3f77d031d 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
+#include <linux/errno.h>
 #include <mach/hardware.h>
 #include "common.h"
 
@@ -44,6 +45,7 @@
 #define TARGET_DEV_BUS		1
 #define TARGET_PCI		3
 #define TARGET_PCIE		4
+#define TARGET_SRAM		9
 #define ATTR_PCIE_MEM		0x59
 #define ATTR_PCIE_IO		0x51
 #define ATTR_PCIE_WA		0x79
@@ -53,6 +55,7 @@
 #define ATTR_DEV_CS1		0x1d
 #define ATTR_DEV_CS2		0x1b
 #define ATTR_DEV_BOOT		0xf
+#define ATTR_SRAM		0x0
 
 /*
  * Helpers to get DDR bank info
@@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win)
 	return 0;
 }
 
-static void __init setup_cpu_win(int win, u32 base, u32 size,
+static int __init setup_cpu_win(int win, u32 base, u32 size,
 				 u8 target, u8 attr, int remap)
 {
 	if (win >= 8) {
 		printk(KERN_ERR "setup_cpu_win: trying to allocate "
 				"window %d\n", win);
-		return;
+		return -ENOSPC;
 	}
 
 	writel(base & 0xffff0000, CPU_WIN_BASE(win));
@@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size,
 		writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
 		writel(0, CPU_WIN_REMAP_HI(win));
 	}
+	return 0;
 }
 
 void __init orion5x_setup_cpu_mbus_bridge(void)
@@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 	setup_cpu_win(win_alloc_count++, base, size,
 		      TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
+
+int __init orion5x_setup_sram_win(void)
+{
+	return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
+			ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
+}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b1c7778d9f9..eafcc49009e 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -31,7 +31,7 @@
 #include <plat/ehci-orion.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -536,16 +536,52 @@ void __init orion5x_xor_init(void)
 	platform_device_register(&orion5x_xor1_channel);
 }
 
+static struct resource orion5x_crypto_res[] = {
+	{
+		.name   = "regs",
+		.start  = ORION5X_CRYPTO_PHYS_BASE,
+		.end    = ORION5X_CRYPTO_PHYS_BASE + 0xffff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "sram",
+		.start  = ORION5X_SRAM_PHYS_BASE,
+		.end    = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "crypto interrupt",
+		.start  = IRQ_ORION5X_CESA,
+		.end    = IRQ_ORION5X_CESA,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_crypto_device = {
+	.name           = "mv_crypto",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(orion5x_crypto_res),
+	.resource       = orion5x_crypto_res,
+};
+
+int __init orion5x_crypto_init(void)
+{
+	int ret;
+
+	ret = orion5x_setup_sram_win();
+	if (ret)
+		return ret;
+
+	return platform_device_register(&orion5x_crypto_device);
+}
 
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
-static struct orion5x_wdt_platform_data orion5x_wdt_data = {
+static struct orion_wdt_platform_data orion5x_wdt_data = {
 	.tclk			= 0,
 };
 
 static struct platform_device orion5x_wdt_device = {
-	.name		= "orion5x_wdt",
+	.name		= "orion_wdt",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &orion5x_wdt_data,
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 798b9a5e3da..de483e83edd 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
 void orion5x_setup_dev1_win(u32 base, u32 size);
 void orion5x_setup_dev2_win(u32 base, u32 size);
 void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+int orion5x_setup_sram_win(void);
 
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
@@ -37,6 +38,7 @@ void orion5x_spi_init(void);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
 void orion5x_xor_init(void);
+int orion5x_crypto_init(void);
 
 /*
  * PCIe/PCI functions.
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index be896e59d3e..5c9744cd8ef 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -17,8 +17,8 @@
 
 #define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
 
-#define CPU_RESET_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
-#define WDT_RESET		0x0002
+#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET_OUT_EN	0x0002
 
 #define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
 
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 377a773ae53..2d876657053 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -24,6 +24,7 @@
  * f1000000	on-chip peripheral registers
  * f2000000	PCIe I/O space
  * f2100000	PCI I/O space
+ * f2200000	SRAM dedicated for the crypto unit
  * f4000000	device bus mappings (boot)
  * fa000000	device bus mappings (cs0)
  * fa800000	device bus mappings (cs2)
@@ -49,6 +50,9 @@
 #define ORION5X_PCI_IO_BUS_BASE		0x00100000
 #define ORION5X_PCI_IO_SIZE		SZ_1M
 
+#define ORION5X_SRAM_PHYS_BASE		(0xf2200000)
+#define ORION5X_SRAM_SIZE		SZ_8K
+
 /* Relevant only for Orion-1/Orion-NAS */
 #define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
 #define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
@@ -94,6 +98,8 @@
 #define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
 #define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
 
+#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x90000)
+
 #define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
 #define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
 
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index e912490fff2..60e734c1045 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd)
 	/*
 	 * Enable and issue soft reset
 	 */
-	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
 	orion5x_setbits(CPU_SOFT_RESET, 1);
 }
 
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index e23a3f91d6c..bc4c3b9aaf8 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 	u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
 	u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
 
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
 	while (mode->mpp >= 0) {
 		u32 *reg;
 		int num_type;
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 41e6d5033d5..61c086b6672 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -181,9 +181,9 @@ static void mss2_power_off(void)
 	/*
 	 * Enable and issue soft reset
 	 */
-	reg = readl(CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
 	reg |= 1 << 2;
-	writel(reg, CPU_RESET_MASK);
+	writel(reg, RSTOUTn_MASK);
 
 	reg = readl(CPU_SOFT_RESET);
 	reg |= 1;
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 0f9cdf45895..37b3d487529 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -25,6 +25,7 @@ struct fpga_devices {
 	/* Technologic Systems */
 	struct fpga_device 	ts_rtc;
 	struct fpga_device 	ts_nand;
+	struct fpga_device 	ts_rng;
 };
 
 struct ts78xx_fpga_data {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 9a6b397f972..5041d1bc26b 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -17,6 +17,7 @@
 #include <linux/m48t86.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/timeriomem-rng.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -270,12 +271,57 @@ static void ts78xx_ts_nand_unload(void)
 }
 
 /*****************************************************************************
+ * HW RNG
+ ****************************************************************************/
+#define TS_RNG_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
+
+static struct resource ts78xx_ts_rng_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= TS_RNG_DATA,
+	.end		= TS_RNG_DATA + 4 - 1,
+};
+
+static struct timeriomem_rng_data ts78xx_ts_rng_data = {
+	.period		= 1000000, /* one second */
+};
+
+static struct platform_device ts78xx_ts_rng_device = {
+	.name		= "timeriomem_rng",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_ts_rng_data,
+	},
+	.resource	= &ts78xx_ts_rng_resource,
+	.num_resources	= 1,
+};
+
+static int ts78xx_ts_rng_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_rng.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_rng_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_rng.init = 1;
+	} else
+		rc = platform_device_add(&ts78xx_ts_rng_device);
+
+	return rc;
+};
+
+static void ts78xx_ts_rng_unload(void)
+{
+	platform_device_del(&ts78xx_ts_rng_device);
+}
+
+/*****************************************************************************
  * FPGA 'hotplug' support code
  ****************************************************************************/
 static void ts78xx_fpga_devices_zero_init(void)
 {
 	ts78xx_fpga.supports.ts_rtc.init = 0;
 	ts78xx_fpga.supports.ts_nand.init = 0;
+	ts78xx_fpga.supports.ts_rng.init = 0;
 }
 
 static void ts78xx_fpga_supports(void)
@@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void)
 	case TS7800_REV_5:
 		ts78xx_fpga.supports.ts_rtc.present = 1;
 		ts78xx_fpga.supports.ts_nand.present = 1;
+		ts78xx_fpga.supports.ts_rng.present = 1;
 		break;
 	default:
 		ts78xx_fpga.supports.ts_rtc.present = 0;
 		ts78xx_fpga.supports.ts_nand.present = 0;
+		ts78xx_fpga.supports.ts_rng.present = 0;
 	}
 }
 
@@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void)
 		}
 		ret |= tmp;
 	}
+	if (ts78xx_fpga.supports.ts_rng.present == 1) {
+		tmp = ts78xx_ts_rng_load();
+		if (tmp) {
+			printk(KERN_INFO "TS-78xx: RNG not registered\n");
+			ts78xx_fpga.supports.ts_rng.present = 0;
+		}
+		ret |= tmp;
+	}
 
 	return ret;
 }
@@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void)
 		ts78xx_ts_rtc_unload();
 	if (ts78xx_fpga.supports.ts_nand.present == 1)
 		ts78xx_ts_nand_unload();
+	if (ts78xx_fpga.supports.ts_rng.present == 1)
+		ts78xx_ts_rng_unload();
 
 	return ret;
 }
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 7ddc22c2bb5..69208217b22 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
+static struct dsa_chip_data wnr854t_switch_chip_data = {
+	.port_names[0] = "lan3",
+	.port_names[1] = "lan4",
+	.port_names[2] = "wan",
+	.port_names[3] = "cpu",
+	.port_names[5] = "lan1",
+	.port_names[7] = "lan2",
+};
+
+static struct dsa_platform_data wnr854t_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &wnr854t_switch_chip_data,
+};
+
 static void __init wnr854t_init(void)
 {
 	/*
@@ -110,6 +125,7 @@ static void __init wnr854t_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
+	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd368a..f4533f8ff4e 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,12 @@ config MACH_INTELMOTE2
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_STARGATE2
+	bool "Intel Stargate 2 Platform"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -88,6 +94,10 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+
 config CORGI_SSP_DEPRECATED
 	bool
 	select PXA_SSP
@@ -280,6 +290,7 @@ config MACH_ZYLONITE
 	select PXA3xx
 	select PXA_SSP
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
@@ -308,6 +319,14 @@ config MACH_CM_X300
 	select PXA3xx
 	select CPU_PXA300
 
+config MACH_H4700
+	bool "HP iPAQ hx4700"
+	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
@@ -505,12 +524,6 @@ config PXA_SSP
 	help
 	  Enable support for PXA2xx SSP ports
 
-config PXA_PWM
-	tristate
-	default BACKLIGHT_PWM
-	help
-	  Enable support for PXA2xx/PXA3xx PWM controllers
-
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4e14b..d18ffef44b8 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -15,7 +15,6 @@ endif
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
-obj-$(CONFIG_PXA_PWM)		+= pwm.o
 
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
@@ -47,6 +46,7 @@ obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
 obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
 obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
@@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
 obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index db52d2c4791..49ae3829231 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -86,20 +86,3 @@ void clks_register(struct clk_lookup *clks, size_t num)
 	for (i = 0; i < num; i++)
 		clkdev_add(&clks[i]);
 }
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
-	struct device *dev)
-{
-	struct clk *r = clk_get(dev, id);
-	struct clk_lookup *l;
-
-	if (!r)
-		return -ENODEV;
-
-	l = clkdev_alloc(r, alias, alias_dev_name);
-	clk_put(r);
-	if (!l)
-		return -ENODEV;
-	clkdev_add(l);
-	return 0;
-}
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 34576ba5f5f..1d2cec25391 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -335,6 +335,10 @@ void __init cmx270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
 	cmx270_init_rtc();
 	cmx270_init_mmc();
 	cmx270_init_ohci();
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index a9f48b1cb54..465da26591b 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -21,18 +21,20 @@
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
+#include <linux/rtc-v3020.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/setup.h>
 
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxa3xx_nand.h>
 
 #include <asm/mach/map.h>
@@ -46,6 +48,11 @@
 
 #define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
 
+#define GPIO95_RTC_CS		(95)
+#define GPIO96_RTC_WR		(96)
+#define GPIO97_RTC_RD		(97)
+#define GPIO98_RTC_IO		(98)
+
 static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
@@ -135,6 +142,12 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
 
+	/* RTC GPIOs */
+	GPIO95_GPIO,			/* RTC CS */
+	GPIO96_GPIO,			/* RTC WR */
+	GPIO97_GPIO,			/* RTC RD */
+	GPIO98_GPIO,			/* RTC IO */
+
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
@@ -265,6 +278,7 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
 
 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
 	.enable_arbiter	= 1,
+	.keep_config	= 1,
 	.parts		= cm_x300_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
 };
@@ -441,6 +455,31 @@ static void __init cm_x300_init_i2c(void)
 static inline void cm_x300_init_i2c(void) {}
 #endif
 
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+struct v3020_platform_data cm_x300_v3020_pdata = {
+	.use_gpio	= 1,
+	.gpio_cs	= GPIO95_RTC_CS,
+	.gpio_wr	= GPIO96_RTC_WR,
+	.gpio_rd	= GPIO97_RTC_RD,
+	.gpio_io	= GPIO98_RTC_IO,
+};
+
+static struct platform_device cm_x300_rtc_device = {
+	.name		= "v3020",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_v3020_pdata,
+	}
+};
+
+static void __init cm_x300_init_rtc(void)
+{
+	platform_device_register(&cm_x300_rtc_device);
+}
+#else
+static inline void cm_x300_init_rtc(void) {}
+#endif
+
 static void __init cm_x300_init(void)
 {
 	/* board-processor specific GPIO initialization */
@@ -453,6 +492,19 @@ static void __init cm_x300_init(void)
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_rtc();
+}
+
+static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
+				 char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (64*1024*1024);
+	mi->bank[1].start = 0xc0000000;
+	mi->bank[1].node = 0;
+	mi->bank[1].size = (64*1024*1024);
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
@@ -463,4 +515,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
+	.fixup		= cm_x300_fixup,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 930e364ccde..962dda2e154 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -42,7 +42,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
@@ -445,13 +445,8 @@ static struct ads7846_platform_data corgi_ads7846_info = {
 	.wait_for_sync		= corgi_wait_for_hsync,
 };
 
-static void corgi_ads7846_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.cs_control	= corgi_ads7846_cs,
+	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
 };
 
 static void corgi_bl_kick_battery(void)
@@ -475,22 +470,12 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 	.kick_battery		= corgi_bl_kick_battery,
 };
 
-static void corgi_lcdcon_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.cs_control	= corgi_lcdcon_cs,
+	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
 };
 
-static void corgi_max1111_cs(u32 command)
-{
-	gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.cs_control	= corgi_max1111_cs,
+	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info corgi_spi_devices[] = {
@@ -520,32 +505,8 @@ static struct spi_board_info corgi_spi_devices[] = {
 
 static void __init corgi_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
-	gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
-	gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
-
 	pxa2xx_set_spi_info(1, &corgi_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-	return;
-
-err_free_2:
-	gpio_free(CORGI_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(CORGI_GPIO_ADS7846_CS);
 }
 #else
 static inline void corgi_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7f04b3a761d..a093282fe4d 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -41,7 +41,6 @@ static void corgi_charger_init(void)
 	pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
 	pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
-	sharpsl_pm_pxa_init();
 }
 
 static void corgi_measure_temp(int on)
@@ -191,7 +190,7 @@ unsigned long corgipm_read_devdata(int type)
 
 static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.init            = corgi_charger_init,
-	.exit            = sharpsl_pm_pxa_remove,
+	.exit            = NULL,
 	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
 	.gpio_acin       = CORGI_GPIO_AC_IN,
 	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 083a1d851d4..3a8ee2272ad 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -36,6 +36,8 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/pxa2xx-regs.h>
 
@@ -47,6 +49,8 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
 #define freq_debug  0
 #endif
 
+static struct regulator *vcc_core;
+
 static unsigned int pxa27x_maxfreq;
 module_param(pxa27x_maxfreq, uint, 0);
 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
@@ -58,6 +62,8 @@ typedef struct {
 	unsigned int cccr;
 	unsigned int div2;
 	unsigned int cclkcfg;
+	int vmin;
+	int vmax;
 } pxa_freqs_t;
 
 /* Define the refresh period in mSec for the SDRAM and the number of rows */
@@ -82,24 +88,24 @@ static unsigned int sdram_rows;
 
 static pxa_freqs_t pxa255_run_freqs[] =
 {
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG},	/* 398,  398,  196,   99  */
+	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
+	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
+	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
+	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
+	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
+	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
 };
 
 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
 static pxa_freqs_t pxa255_turbo_freqs[] =
 {
 	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG},	/* 199,  398,   99,   99  */
+	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
+	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
+	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
+	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
+	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
 };
 
 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
@@ -148,13 +154,13 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
    ((T)  ? CCLKCFG_TURBO : 0))
 
 static pxa_freqs_t pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1)},
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1)},
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
+	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
+	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
+	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
+	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
+	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
 };
 
 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
@@ -163,6 +169,47 @@ static struct cpufreq_frequency_table
 
 extern unsigned get_clk_frequency_khz(int info);
 
+#ifdef CONFIG_REGULATOR
+
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+	int ret = 0;
+	int vmin, vmax;
+
+	if (!cpu_is_pxa27x())
+		return 0;
+
+	vmin = pxa_freq->vmin;
+	vmax = pxa_freq->vmax;
+	if ((vmin == -1) || (vmax == -1))
+		return 0;
+
+	ret = regulator_set_voltage(vcc_core, vmin, vmax);
+	if (ret)
+		pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
+		       vmin, vmax);
+	return ret;
+}
+
+static __init void pxa_cpufreq_init_voltages(void)
+{
+	vcc_core = regulator_get(NULL, "vcc_core");
+	if (IS_ERR(vcc_core)) {
+		pr_info("cpufreq: Didn't find vcc_core regulator\n");
+		vcc_core = NULL;
+	} else {
+		pr_info("cpufreq: Found vcc_core regulator\n");
+	}
+}
+#else
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+	return 0;
+}
+
+static __init void pxa_cpufreq_init_voltages(void) { }
+#endif
+
 static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
 			     pxa_freqs_t **pxa_freqs)
 {
@@ -251,6 +298,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	unsigned long flags;
 	unsigned int new_freq_cpu, new_freq_mem;
 	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+	int ret = 0;
 
 	/* Get the current policy */
 	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
@@ -273,6 +321,10 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
+	if (vcc_core && freqs.new > freqs.old)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+	if (ret)
+		return ret;
 	/*
 	 * Tell everyone what we're about to do...
 	 * you should add a notify client with any platform specific
@@ -335,6 +387,18 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	 */
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
+	/*
+	 * Even if voltage setting fails, we don't report it, as the frequency
+	 * change succeeded. The voltage reduction is not a critical failure,
+	 * only power savings will suffer from this.
+	 *
+	 * Note: if the voltage change fails, and a return value is returned, a
+	 * bug is triggered (seems a deadlock). Should anybody find out where,
+	 * the "return 0" should become a "return ret".
+	 */
+	if (vcc_core && freqs.new < freqs.old)
+		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+
 	return 0;
 }
 
@@ -349,6 +413,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	if (cpu_is_pxa27x())
 		pxa27x_guess_max_freq();
 
+	pxa_cpufreq_init_voltages();
+
 	init_sdram_rows();
 
 	/* set default policy and cpuinfo */
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 2b289f83a61..7d3e1b46e55 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -16,15 +16,17 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/sm501.h>
+#include <linux/smsc911x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/csb726.h>
 #include <mach/mfp-pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -275,15 +277,26 @@ static struct resource csb726_lan_resources[] = {
 	{
 		.start	= CSB726_IRQ_LAN,
 		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
+struct smsc911x_platform_config csb726_lan_config = {
+	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+
 static struct platform_device csb726_lan = {
-	.name		= "smc911x",
+	.name		= "smsc911x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
 	.resource	= csb726_lan_resources,
+	.dev		= {
+		.platform_data	= &csb726_lan_config,
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -303,6 +316,7 @@ static void __init csb726_init(void)
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_mci_info(&csb726_mci);
 	pxa_set_ohci_info(&csb726_ohci_platform_data);
+	pxa_set_ac97_info(NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 29970f703f3..ecc08f360b6 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -8,7 +8,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
@@ -290,7 +290,7 @@ static struct resource pxa3xx_resources_i2c_power[] = {
 };
 
 struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa2xx-i2c",
+	.name		= "pxa3xx-pwri2c",
 	.id		= 1,
 	.resource	= pxa3xx_resources_i2c_power,
 	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index bc0f73fbd4c..243e0802b5f 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,6 +28,8 @@
 #include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <media/soc_camera.h>
 
@@ -41,7 +43,7 @@
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>
 
@@ -52,23 +54,31 @@
 #define GPIO13_MMC_CD		(13)
 #define GPIO95_MMC_WP		(95)
 #define GPIO56_NAND_RB		(56)
+#define GPIO93_CAM_RESET	(93)
+#define GPIO16_USB_HUB_RESET	(16)
 
 /* eXeda specific GPIOs */
 #define GPIO114_MMC_CD		(114)
 #define GPIO20_NAND_RB		(20)
 #define GPIO38_SD_PWEN		(38)
+#define GPIO37_WLAN_RST		(37)
+#define GPIO95_TOUCHPAD_INT	(95)
+#define GPIO130_CAM_RESET	(130)
+#define GPIO10_USB_HUB_RESET	(10)
 
 /* common  GPIOs */
 #define GPIO11_NAND_CS		(11)
-#define GPIO93_CAM_RESET	(93)
 #define GPIO41_ETHIRQ		(41)
 #define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
 #define GPIO115_WLAN_PWEN	(115)
 #define GPIO19_WLAN_STRAP	(19)
+#define GPIO9_USB_VBUS_EN	(9)
 
 static int mmc_cd;
 static int nand_rb;
 static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
 
 static unsigned long common_pin_config[] = {
 	/* AC'97 */
@@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = {
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
-	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
 	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
 
 	/* NAND controls */
@@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = {
 };
 
 static unsigned long em_x270_pin_config[] = {
-	GPIO13_GPIO,	/* MMC card detect */
-	GPIO56_GPIO,	/* NAND Ready/Busy */
-	GPIO95_GPIO,	/* MMC Write protect */
+	GPIO13_GPIO,				/* MMC card detect */
+	GPIO16_GPIO,				/* USB hub reset */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
+	GPIO95_GPIO,				/* MMC Write protect */
 };
 
 static unsigned long exeda_pin_config[] = {
+	GPIO10_GPIO,				/* USB hub reset */
 	GPIO20_GPIO,				/* NAND Ready/Busy */
 	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
+	GPIO95_GPIO,				/* touchpad IRQ */
 	GPIO114_GPIO,				/* MMC card detect */
 };
 
@@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {}
 
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+	int err;
+
+	em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+	if (IS_ERR(em_x270_usb_ldo))
+		return PTR_ERR(em_x270_usb_ldo);
+
+	err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+	if (err)
+		goto err_free_usb_ldo;
+
+	err = gpio_request(usb_hub_reset, "hub rst");
+	if (err)
+		goto err_free_vbus_gpio;
+
+	/* USB Hub power-on and reset */
+	gpio_direction_output(usb_hub_reset, 0);
+	regulator_enable(em_x270_usb_ldo);
+	gpio_set_value(usb_hub_reset, 1);
+	gpio_set_value(usb_hub_reset, 0);
+	regulator_disable(em_x270_usb_ldo);
+	regulator_enable(em_x270_usb_ldo);
+	gpio_set_value(usb_hub_reset, 1);
+
+	/* enable VBUS */
+	gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+
+	return 0;
+
+err_free_vbus_gpio:
+	gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+	regulator_put(em_x270_usb_ldo);
+
+	return err;
+}
+
 static int em_x270_ohci_init(struct device *dev)
 {
+	int err;
+
+	/* we don't want to entirely disable USB if the HUB init failed */
+	err = em_x270_usb_hub_init();
+	if (err)
+		pr_err("USB Hub initialization failed: %d\n", err);
+
 	/* enable port 2 transiever */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 
 	return 0;
 }
 
+static void em_x270_ohci_exit(struct device *dev)
+{
+	gpio_free(usb_hub_reset);
+	gpio_free(GPIO9_USB_VBUS_EN);
+
+	if (!IS_ERR(em_x270_usb_ldo)) {
+		if (regulator_is_enabled(em_x270_usb_ldo))
+			regulator_disable(em_x270_usb_ldo);
+
+		regulator_put(em_x270_usb_ldo);
+	}
+}
+
 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
 	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.init		= em_x270_ohci_init,
+	.exit		= em_x270_ohci_exit,
 };
 
 static void __init em_x270_init_ohci(void)
@@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi)
 	if (err)
 		return err;
 
+	err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		goto err_free_pwen;
+
+	if (machine_is_exeda()) {
+		err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+		if (err)
+			goto err_free_strap;
+
+		gpio_direction_output(GPIO37_WLAN_RST, 1);
+		msleep(100);
+	}
+
 	gpio_direction_output(GPIO19_WLAN_STRAP, 1);
-	mdelay(100);
+	msleep(100);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
 
 	gpio_direction_output(GPIO115_WLAN_PWEN, 0);
-	mdelay(100);
+	msleep(100);
 	gpio_set_value(GPIO115_WLAN_PWEN, 1);
-	mdelay(100);
+	msleep(100);
 
 	spi->bits_per_word = 16;
 	spi_setup(spi);
 
 	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+	gpio_free(GPIO115_WLAN_PWEN);
+
+	return err;
 }
 
 static int em_x270_libertas_teardown(struct spi_device *spi)
 {
 	gpio_set_value(GPIO115_WLAN_PWEN, 0);
 	gpio_free(GPIO115_WLAN_PWEN);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	if (machine_is_exeda()) {
+		gpio_set_value(GPIO37_WLAN_RST, 0);
+		gpio_free(GPIO37_WLAN_RST);
+	}
 
 	return 0;
 }
@@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev)
 {
 	int ret;
 
-	ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+	ret = gpio_request(cam_reset, "camera reset");
 	if (ret)
 		return ret;
 
-	gpio_direction_output(GPIO93_CAM_RESET, 0);
+	gpio_direction_output(cam_reset, 0);
 
 	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
 	if (em_x270_camera_ldo == NULL) {
-		gpio_free(GPIO93_CAM_RESET);
+		gpio_free(cam_reset);
 		return -ENODEV;
 	}
 
 	ret = regulator_enable(em_x270_camera_ldo);
 	if (ret) {
 		regulator_put(em_x270_camera_ldo);
-		gpio_free(GPIO93_CAM_RESET);
+		gpio_free(cam_reset);
 		return ret;
 	}
 
-	gpio_set_value(GPIO93_CAM_RESET, 1);
+	gpio_set_value(cam_reset, 1);
 
 	return 0;
 }
@@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	if (on == is_on)
 		return 0;
 
-	gpio_set_value(GPIO93_CAM_RESET, !on);
+	gpio_set_value(cam_reset, !on);
 
 	if (on)
 		ret = regulator_enable(em_x270_camera_ldo);
@@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	if (ret)
 		return ret;
 
-	gpio_set_value(GPIO93_CAM_RESET, on);
+	gpio_set_value(cam_reset, on);
 
 	return 0;
 }
@@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = {
 	},
 };
 
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
-	.fast_mode = 1,
-};
-
 static void  __init em_x270_init_camera(void)
 {
-	pxa_set_i2c_info(&em_x270_i2c_info);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
 	pxa_set_camera_info(&em_x270_camera_platform_data);
 }
@@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = {
 };
 
 struct power_supply_info em_x270_psy_info = {
-	.name = "LP555597P6H-FPS",
+	.name = "battery",
 	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
 	.voltage_max_design = 4200000,
 	.voltage_min_design = 3000000,
@@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void)
 	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
 }
 
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+	.gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("pca9555", 0x21),
+		.platform_data = &exeda_gpio_ext_pdata,
+	},
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+	.fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+	pxa_set_i2c_info(&em_x270_i2c_info);
+
+	if (machine_is_exeda())
+		i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
 static void __init em_x270_module_init(void)
 {
 	pr_info("%s\n", __func__);
@@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void)
 	mmc_cd = GPIO13_MMC_CD;
 	nand_rb = GPIO56_NAND_RB;
 	dm9000_flags = DM9000_PLATF_32BITONLY;
+	cam_reset = GPIO93_CAM_RESET;
+	usb_hub_reset = GPIO16_USB_HUB_RESET;
 }
 
 static void __init em_x270_exeda_init(void)
@@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void)
 	mmc_cd = GPIO114_MMC_CD;
 	nand_rb = GPIO20_NAND_RB;
 	dm9000_flags = DM9000_PLATF_16BITONLY;
+	cam_reset = GPIO130_CAM_RESET;
+	usb_hub_reset = GPIO10_USB_HUB_RESET;
 }
 
 static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+#ifdef CONFIG_PM
+	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
 	if (machine_is_em_x270())
 		em_x270_module_init();
 	else if (machine_is_exeda())
@@ -1111,8 +1237,9 @@ static void __init em_x270_init(void)
 	em_x270_init_keypad();
 	em_x270_init_gpio_keys();
 	em_x270_init_ac97();
-	em_x270_init_camera();
 	em_x270_init_spi();
+	em_x270_init_i2c();
+	em_x270_init_camera();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 7db966dc29c..588b265e575 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -25,13 +26,19 @@
 #include <mach/pxa27x.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
 
+#define GPIO12_A780_FLIP_LID 		12
+#define GPIO15_A1200_FLIP_LID 		15
+#define GPIO15_A910_FLIP_LID 		15
+#define GPIO12_E680_LOCK_SWITCH 	12
+#define GPIO15_E6_LOCK_SWITCH 		15
+
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
 	.max_brightness	= 1023,
@@ -88,7 +95,7 @@ static struct pxafb_mach_info ezx_fb_info_2 = {
 	.lcd_conn	= LCD_COLOR_TFT_18BPP,
 };
 
-static struct platform_device *devices[] __initdata = {
+static struct platform_device *ezx_devices[] __initdata = {
 	&ezx_backlight_device,
 };
 
@@ -651,6 +658,35 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 #endif /* CONFIG_MACH_EZX_E2 */
 
 #ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO12_A780_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A780 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+	.buttons  = a780_buttons,
+	.nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a780_gpio_keys_platform_data,
+	},
+};
+
+static struct platform_device *a780_devices[] __initdata = {
+	&a780_gpio_keys,
+};
+
 static void __init a780_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -663,7 +699,8 @@ static void __init a780_init(void)
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
@@ -678,10 +715,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E680
+/* gpio_keys */
+static struct gpio_keys_button e680_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO12_E680_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E680 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
+	.buttons  = e680_buttons,
+	.nbuttons = ARRAY_SIZE(e680_buttons),
+};
+
+static struct platform_device e680_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e680_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata e680_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e680_devices[] __initdata = {
+	&e680_gpio_keys,
+};
+
 static void __init e680_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -695,7 +761,8 @@ static void __init e680_init(void)
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
@@ -710,10 +777,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A1200
+/* gpio_keys */
+static struct gpio_keys_button a1200_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A1200_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A1200 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
+	.buttons  = a1200_buttons,
+	.nbuttons = ARRAY_SIZE(a1200_buttons),
+};
+
+static struct platform_device a1200_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a1200_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *a1200_devices[] __initdata = {
+	&a1200_gpio_keys,
+};
+
 static void __init a1200_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -727,7 +823,8 @@ static void __init a1200_init(void)
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
@@ -742,6 +839,35 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A910
+/* gpio_keys */
+static struct gpio_keys_button a910_buttons[] = {
+	[0] = {
+		.code       = SW_LID,
+		.gpio       = GPIO15_A910_FLIP_LID,
+		.active_low = 0,
+		.desc       = "A910 flip lid",
+		.type       = EV_SW,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
+	.buttons  = a910_buttons,
+	.nbuttons = ARRAY_SIZE(a910_buttons),
+};
+
+static struct platform_device a910_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &a910_gpio_keys_platform_data,
+	},
+};
+
+static struct platform_device *a910_devices[] __initdata = {
+	&a910_gpio_keys,
+};
+
 static void __init a910_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -754,7 +880,8 @@ static void __init a910_init(void)
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
@@ -769,10 +896,39 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E6
+/* gpio_keys */
+static struct gpio_keys_button e6_buttons[] = {
+	[0] = {
+		.code       = KEY_SCREENLOCK,
+		.gpio       = GPIO15_E6_LOCK_SWITCH,
+		.active_low = 0,
+		.desc       = "E6 lock switch",
+		.type       = EV_KEY,
+		.wakeup     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
+	.buttons  = e6_buttons,
+	.nbuttons = ARRAY_SIZE(e6_buttons),
+};
+
+static struct platform_device e6_gpio_keys = {
+	.name = "gpio-keys",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &e6_gpio_keys_platform_data,
+	},
+};
+
 static struct i2c_board_info __initdata e6_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e6_devices[] __initdata = {
+	&e6_gpio_keys,
+};
+
 static void __init e6_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -786,7 +942,8 @@ static void __init e6_init(void)
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
@@ -805,6 +962,9 @@ static struct i2c_board_info __initdata e2_i2c_board_info[] = {
 	{ I2C_BOARD_INFO("tea5767", 0x81) },
 };
 
+static struct platform_device *e2_devices[] __initdata = {
+};
+
 static void __init e2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -818,7 +978,8 @@ static void __init e2_init(void)
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
new file mode 100644
index 00000000000..7fff467e84f
--- /dev/null
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -0,0 +1,851 @@
+/*
+ * Support for HP iPAQ hx4700 PDAs.
+ *
+ * Copyright (c) 2008-2009 Philipp Zabel
+ *
+ * Based on code:
+ *    Copyright (c) 2004 Hewlett-Packard Company.
+ *    Copyright (c) 2005 SDG Systems, LLC
+ *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/lcd.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mfd/asic3.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/hx4700.h>
+#include <plat/i2c.h>
+#include <mach/irda.h>
+#include <mach/pxa2xx_spi.h>
+
+#include <video/w100fb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Physical address space information */
+
+#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
+#define ASIC3_PHYS      PXA_CS3_PHYS
+#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
+
+static unsigned long hx4700_pin_config[] __initdata = {
+
+	/* SDRAM and Static Memory I/O Signals */
+	GPIO20_nSDCS_2,
+	GPIO21_nSDCS_3,
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,   /* W3220 */
+	GPIO79_nCS_3,   /* ASIC3 */
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,	/* EGPIO, WLAN */
+
+	/* PC CARD */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO85_nPCE_1,
+	GPIO104_PSKTSEL,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* FFUART (RS-232) */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* PWM 1 (Backlight) */
+	GPIO17_PWM1_OUT,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO113_I2S_SYSCLK,
+
+	/* SSP 1 (NavPoint) */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP 2 (TSC2046) */
+	GPIO19_SSP2_SCLK,
+	GPIO86_SSP2_RXD,
+	GPIO87_SSP2_TXD,
+	GPIO88_GPIO,
+
+	/* HX4700 specific input GPIOs */
+	GPIO12_GPIO,	/* ASIC3_IRQ */
+	GPIO13_GPIO,	/* W3220_IRQ */
+	GPIO14_GPIO,	/* nWLAN_IRQ */
+
+	GPIO10_GPIO,	/* GSM_IRQ */
+	GPIO13_GPIO,	/* CPLD_IRQ */
+	GPIO107_GPIO,	/* DS1WM_IRQ */
+	GPIO108_GPIO,	/* GSM_READY */
+	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
+	GPIO66_GPIO,	/* nSDIO_IRQ */
+};
+
+#define HX4700_GPIO_IN(num, _desc) \
+	{ .gpio = (num), .dir = 0, .desc = (_desc) }
+#define HX4700_GPIO_OUT(num, _init, _desc) \
+	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+	unsigned gpio : 8;
+	unsigned dir : 1;
+	unsigned init : 1;
+	char *desc;
+};
+
+static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
+{
+	int i, rc = 0;
+	int gpio;
+	int dir;
+
+	for (i = 0; (!rc) && (i < size); i++) {
+		gpio = gpios[i].gpio;
+		dir = gpios[i].dir;
+		rc = gpio_request(gpio, gpios[i].desc);
+		if (rc) {
+			pr_err("Error requesting GPIO %d(%s) : %d\n",
+			       gpio, gpios[i].desc, rc);
+			continue;
+		}
+		if (dir)
+			gpio_direction_output(gpio, gpios[i].init);
+		else
+			gpio_direction_input(gpio);
+	}
+	while ((rc) && (--i >= 0))
+		gpio_free(gpios[i].gpio);
+	return rc;
+}
+
+/*
+ * IRDA
+ */
+
+static void irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data ficp_info = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
+	{						\
+		.code       = KEY_##_code,		\
+		.gpio       = _gpio,			\
+		.active_low = _active_low,		\
+		.desc       = _desc,			\
+		.type       = EV_KEY,			\
+		.wakeup     = 1,			\
+	}
+
+static struct gpio_keys_button gpio_keys_buttons[] = {
+	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
+	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
+	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
+	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
+	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
+	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+	.buttons = gpio_keys_buttons,
+	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
+};
+
+static struct platform_device gpio_keys = {
+	.name = "gpio-keys",
+	.dev  = {
+		.platform_data = &gpio_keys_data,
+	},
+	.id   = -1,
+};
+
+/*
+ * ASIC3
+ */
+
+static u16 asic3_gpio_config[] = {
+	/* ASIC3 GPIO banks A and B along with some of C and D
+	   implement the buffering for the CF slot. */
+	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
+
+	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
+	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
+
+	/* GPIOC - CF, LEDs, SD */
+	ASIC3_GPIOC0_LED0,		/* red */
+	ASIC3_GPIOC1_LED1,		/* green */
+	ASIC3_GPIOC2_LED2,		/* blue */
+	ASIC3_GPIOC4_CF_nCD,
+	ASIC3_GPIOC5_nCIOW,
+	ASIC3_GPIOC6_nCIOR,
+	ASIC3_GPIOC7_nPCE_1,
+	ASIC3_GPIOC8_nPCE_2,
+	ASIC3_GPIOC9_nPOE,
+	ASIC3_GPIOC10_nPWE,
+	ASIC3_GPIOC11_PSKTSEL,
+	ASIC3_GPIOC12_nPREG,
+	ASIC3_GPIOC13_nPWAIT,
+	ASIC3_GPIOC14_nPIOIS16,
+	ASIC3_GPIOC15_nPIOR,
+
+	/* GPIOD: input GPIOs, CF */
+	ASIC3_GPIOD11_nCIOIS16,
+	ASIC3_GPIOD12_nCWAIT,
+	ASIC3_GPIOD15_nPIOW,
+};
+
+static struct resource asic3_resources[] = {
+	/* GPIO part */
+	[0] = {
+		.start	= ASIC3_PHYS,
+		.end	= ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.end	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* SD part */
+	[2] = {
+		.start	= ASIC3_SD_PHYS,
+		.end	= ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.end	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct asic3_platform_data asic3_platform_data = {
+	.gpio_config     = asic3_gpio_config,
+	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
+	.irq_base        = IRQ_BOARD_START,
+	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
+};
+
+static struct platform_device asic3 = {
+	.name          = "asic3",
+	.id            = -1,
+	.resource      = asic3_resources,
+	.num_resources = ARRAY_SIZE(asic3_resources),
+	.dev = {
+		.platform_data = &asic3_platform_data,
+	},
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start = PXA_CS5_PHYS,
+		.end   = PXA_CS5_PHYS + 0x4 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start = 0,
+		.gpio_base = HX4700_EGPIO_BASE,
+		.num_gpios = 8,
+		.direction = HTC_EGPIO_OUTPUT,
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width = 16,
+	.bus_width = 16,
+	.chip      = egpio_chips,
+	.num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+	.name          = "htc-egpio",
+	.id            = -1,
+	.resource      = egpio_resources,
+	.num_resources = ARRAY_SIZE(egpio_resources),
+	.dev = {
+		.platform_data = &egpio_info,
+	},
+};
+
+/*
+ * LCD - Sony display connected to ATI Imageon w3220
+ */
+
+static int lcd_power;
+
+static void sony_lcd_init(void)
+{
+	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+	mdelay(20);
+
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
+	mdelay(5);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
+
+	/* FIXME: init w3220 registers here */
+
+	mdelay(5);
+	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
+	mdelay(10);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
+	mdelay(10);
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
+	mdelay(10);
+	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
+}
+
+static void sony_lcd_off(void)
+{
+	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
+	mdelay(10);
+	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+	mdelay(10);
+	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+}
+
+static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
+{
+	switch (level) {
+	case FB_BLANK_UNBLANK:
+		sony_lcd_init();
+		break;
+	case FB_BLANK_NORMAL:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_POWERDOWN:
+		sony_lcd_off();
+		break;
+	}
+	lcd_power = level;
+	return 0;
+}
+
+static int hx4700_lcd_get_power(struct lcd_device *lm)
+{
+	return lcd_power;
+}
+
+static struct lcd_ops hx4700_lcd_ops = {
+	.get_power = hx4700_lcd_get_power,
+	.set_power = hx4700_lcd_set_power,
+};
+
+static struct lcd_device *hx4700_lcd_device;
+
+#ifdef CONFIG_PM
+static void w3220_lcd_suspend(struct w100fb_par *wfb)
+{
+	sony_lcd_off();
+}
+
+static void w3220_lcd_resume(struct w100fb_par *wfb)
+{
+	sony_lcd_init();
+}
+#else
+#define w3220_lcd_resume	NULL
+#define w3220_lcd_suspend	NULL
+#endif
+
+static struct w100_tg_info w3220_tg_info = {
+	.suspend	= w3220_lcd_suspend,
+	.resume		= w3220_lcd_resume,
+};
+
+/*  				 W3220_VGA		QVGA */
+static struct w100_gen_regs w3220_regs = {
+	.lcd_format =        0x00000003,
+	.lcdd_cntl1 =        0x00000000,
+	.lcdd_cntl2 =        0x0003ffff,
+	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
+	.genlcd_cntl2 =      0x00000003,
+	.genlcd_cntl3 =      0x000102aa,
+};
+
+static struct w100_mode w3220_modes[] = {
+{
+	.xres 		= 480,
+	.yres 		= 640,
+	.left_margin 	= 15,
+	.right_margin 	= 16,
+	.upper_margin 	= 8,
+	.lower_margin 	= 7,
+	.crtc_ss	= 0x00000000,
+	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
+	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
+	.crtc_vpos_gs	= 0x0000028f,
+	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
+	.crtc_rev	= 0,
+	.crtc_dclk	= 0x80000000,
+	.crtc_gclk	= 0x040a0104,
+	.crtc_goe	= 0,
+	.pll_freq 	= 95,
+	.pixclk_divider = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+},
+{
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 9,
+	.right_margin 	= 8,
+	.upper_margin 	= 5,
+	.lower_margin 	= 4,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls        = 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0x81700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 95,
+	.pixclk_divider = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+},
+};
+
+struct w100_mem_info w3220_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+struct w100_bm_mem_info w3220_bm_mem_info = {
+	.ext_mem_bw = 0x50413e01,
+	.offset = 0,
+	.ext_timing_ctl = 0x00043f7f,
+	.ext_cntl = 0x00000010,
+	.mode_reg = 0x00250000,
+	.io_cntl = 0x0fff0000,
+	.config = 0x08301480,
+};
+
+static struct w100_gpio_regs w3220_gpio_info = {
+	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
+	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
+	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
+	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
+	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
+	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info w3220_info = {
+	.tg        = &w3220_tg_info,
+	.mem       = &w3220_mem_info,
+	.bm_mem    = &w3220_bm_mem_info,
+	.gpio      = &w3220_gpio_info,
+	.regs      = &w3220_regs,
+	.modelist  = w3220_modes,
+	.num_modes = 2,
+	.xtal_freq = 16000000,
+};
+
+static struct resource w3220_resources[] = {
+	[0] = {
+		.start	= ATI_W3220_PHYS,
+		.end	= ATI_W3220_PHYS + 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device w3220 = {
+	.name	= "w100fb",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &w3220_info,
+	},
+	.num_resources = ARRAY_SIZE(w3220_resources),
+	.resource      = w3220_resources,
+};
+
+/*
+ * Backlight
+ */
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 1,
+	.max_brightness = 200,
+	.dft_brightness = 100,
+	.pwm_period_ns  = 30923,
+};
+
+static struct platform_device backlight = {
+	.name = "pwm-backlight",
+	.id   = -1,
+	.dev  = {
+		.parent        = &pxa27x_device_pwm1.dev,
+		.platform_data = &backlight_data,
+	},
+};
+
+/*
+ * USB "Transceiver"
+ */
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN,
+	.gpio_vbus          = GPIOD14_nUSBC_DETECT,
+	.gpio_vbus_inverted = 1,
+};
+
+static struct platform_device gpio_vbus = {
+	.name          = "gpio-vbus",
+	.id            = -1,
+	.dev = {
+		.platform_data = &gpio_vbus_info,
+	},
+};
+
+/*
+ * Touchscreen - TSC2046 connected to SSP2
+ */
+
+static const struct ads7846_platform_data tsc2046_info = {
+	.model            = 7846,
+	.vref_delay_usecs = 100,
+	.pressure_max     = 512,
+	.debounce_max     = 10,
+	.debounce_tol     = 3,
+	.debounce_rep     = 1,
+	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
+};
+
+static struct pxa2xx_spi_chip tsc2046_chip = {
+	.tx_threshold = 1,
+	.rx_threshold = 2,
+	.timeout      = 64,
+	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
+};
+
+static struct spi_board_info tsc2046_board_info[] __initdata = {
+	{
+		.modalias        = "ads7846",
+		.bus_num         = 2,
+		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
+		.irq             = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+		.platform_data   = &tsc2046_info,
+		.controller_data = &tsc2046_chip,
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+	.num_chipselect = 1,
+	.clock_enable   = CKEN_SSP2,
+	.enable_dma     = 1,
+};
+
+/*
+ * External power
+ */
+
+static int power_supply_init(struct device *dev)
+{
+	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
+}
+
+static int hx4700_is_ac_online(void)
+{
+	return !gpio_get_value(GPIOD9_nAC_IN);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIOD9_nAC_IN);
+}
+
+static char *hx4700_supplicants[] = {
+	"ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = hx4700_is_ac_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = hx4700_supplicants,
+	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = {
+		.name  = "ac",
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = gpio_to_irq(GPIOD9_nAC_IN),
+		.end   = gpio_to_irq(GPIOD9_nAC_IN),
+	},
+	[1] = {
+		.name  = "usb",
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
+		.start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+		.end   = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+	},
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+	.resource      = power_supply_resources,
+	.num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+	{
+		.dev = &gpio_vbus.dev,
+		.supply = "vbus_draw",
+	},
+	{
+		.dev = &power_supply.dev,
+		.supply = "ac_draw",
+	},
+};
+
+static struct regulator_init_data bq24022_init_data = {
+	.constraints = {
+		.max_uA         = 500000,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
+	.consumer_supplies      = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+	.gpio_nce   = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+	.gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2,
+	.init_data  = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+	.name = "bq24022",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &bq24022_info,
+	},
+};
+
+/*
+ * StrataFlash
+ */
+
+static void hx4700_set_vpp(struct map_info *map, int vpp)
+{
+	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
+}
+
+static struct resource strataflash_resource = {
+	.start = PXA_CS0_PHYS,
+	.end   = PXA_CS0_PHYS + SZ_128M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+	.width = 4,
+	.set_vpp = hx4700_set_vpp,
+};
+
+static struct platform_device strataflash = {
+	.name          = "physmap-flash",
+	.id            = -1,
+	.resource      = &strataflash_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &strataflash_data,
+	},
+};
+
+/*
+ * PCMCIA
+ */
+
+static struct platform_device pcmcia = {
+	.name = "hx4700-pcmcia",
+	.dev  = {
+		.parent = &asic3.dev,
+	},
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+	&asic3,
+	&gpio_keys,
+	&backlight,
+	&w3220,
+	&egpio,
+	&bq24022,
+	&gpio_vbus,
+	&power_supply,
+	&strataflash,
+	&pcmcia,
+};
+
+static struct gpio_ress global_gpios[] = {
+	HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"),
+	HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"),
+	HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"),
+	HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1,          1, "LCD_PC1"),
+	HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET,       1, "LCD_RESET"),
+	HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1,        1, "LCD_SLIN1"),
+	HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN,          1, "LCD_SQN"),
+	HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"),
+	HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"),
+	HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON,         1, "RS232_ON"),
+	HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET,     1, "ASIC3_nRESET"),
+	HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET,      1, "EUART_RESET"),
+	HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON,          1, "nIR_EN"),
+};
+
+static void __init hx4700_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	pxa_set_ficp_info(&ficp_info);
+	pxa27x_set_i2c_power_info(NULL);
+	pxa_set_i2c_info(NULL);
+	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
+
+	hx4700_lcd_device = lcd_device_register("w100fb", NULL,
+					(void *)&w3220_info, &hx4700_lcd_ops);
+
+	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
+	mdelay(10);
+	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
+	mdelay(10);
+}
+
+MACHINE_START(H4700, "HP iPAQ HX4700")
+	.phys_io      = 0x40000000,
+	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params  = 0xa0000100,
+	.map_io       = pxa_map_io,
+	.init_irq     = pxa27x_init_irq,
+	.init_machine = hx4700_init,
+	.timer        = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2b27336c29f..961807dc646 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -22,6 +22,7 @@
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,7 +30,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/udc.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
@@ -102,6 +103,10 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO96_GPIO,	/* accelerometer interrupt */
 	GPIO99_GPIO,	/* ADC interrupt */
 
+	/* SHT15 */
+	GPIO100_GPIO,
+	GPIO98_GPIO,
+
 	/* Connector pins specified as gpios */
 	GPIO94_GPIO, /* large basic connector pin 14 */
 	GPIO10_GPIO, /* large basic connector pin 23 */
@@ -112,6 +117,26 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO105_GPIO, /* blue led */
 };
 
+static struct sht15_platform_data platform_data_sht15 = {
+	.gpio_data =  100,
+	.gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+	.name = "sht15",
+	.id = -1,
+	.dev = {
+		.platform_data = &platform_data_sht15,
+	},
+};
+
+static struct regulator_consumer_supply imote2_sensor_3_con[] = {
+	{
+		.dev = &sht15.dev,
+		.supply = "vcc",
+	},
+};
+
 static struct gpio_led imote2_led_pins[] = {
 	{
 		.name       =  "imote2:red",
@@ -257,6 +282,8 @@ static struct regulator_init_data imote2_ldo_init_data[] = {
 			.min_uV = 2800000,
 			.max_uV = 3000000,
 		},
+		.num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
+		.consumer_supplies = imote2_sensor_3_con,
 	},
 	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
 		.constraints = {
@@ -432,6 +459,9 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
 		.type = "tmp175",
 		.addr = 0x4A,
 		.irq = IRQ_GPIO(96),
+	}, { /* IMB400 Multimedia board */
+		.type = "wm8940",
+		.addr = 0x1A,
 	},
 };
 
@@ -456,25 +486,12 @@ static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
 	.num_chipselect = 1,
 };
 
-/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove
- * the need for these functions.
- */
-static void spi1control(u32 command)
-{
-	gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
-static void spi3control(u32 command)
-{
-	gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
 static struct pxa2xx_spi_chip staccel_chip_info = {
 	.tx_threshold = 8,
 	.rx_threshold = 8,
 	.dma_burst_size = 8,
 	.timeout = 235,
-	.cs_control = spi1control,
+	.gpio_cs = 24,
 };
 
 static struct pxa2xx_spi_chip cc2420_info = {
@@ -482,7 +499,7 @@ static struct pxa2xx_spi_chip cc2420_info = {
 	.rx_threshold = 8,
 	.dma_burst_size = 8,
 	.timeout = 235,
-	.cs_control = spi3control,
+	.gpio_cs = 39,
 };
 
 static struct spi_board_info spi_board_info[] __initdata = {
@@ -521,6 +538,7 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
 static struct platform_device *imote2_devices[] = {
 	&imote2_flash_device,
 	&imote2_leds,
+	&sht15,
 };
 
 static struct i2c_pxa_platform_data i2c_pwr_pdata = {
@@ -538,8 +556,6 @@ static void __init imote2_init(void)
 	/* SPI chip select directions - all other directions should
 	 * be handled by drivers.*/
 	gpio_direction_output(37, 0);
-	gpio_direction_output(24, 0);
-	gpio_direction_output(39, 0);
 
 	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
 
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
new file mode 100644
index 00000000000..9eaeed1f87f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -0,0 +1,131 @@
+/*
+ * GPIO and IRQ definitions for HP iPAQ hx4700
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _HX4700_H_
+#define _HX4700_H_
+
+#include <linux/gpio.h>
+#include <linux/mfd/asic3.h>
+
+#define HX4700_ASIC3_GPIO_BASE	NR_BUILTIN_GPIO
+#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_HX4700_nKEY_POWER			0
+#define GPIO12_HX4700_ASIC3_IRQ			12
+#define GPIO13_HX4700_W3220_IRQ			13
+#define GPIO14_HX4700_nWLAN_IRQ			14
+#define GPIO18_HX4700_RDY			18
+#define GPIO22_HX4700_LCD_RL			22
+#define GPIO27_HX4700_CODEC_ON			27
+#define GPIO32_HX4700_RS232_ON			32
+#define GPIO52_HX4700_CPU_nBATT_FAULT		52
+#define GPIO58_HX4700_TSC2046_nPENIRQ		58
+#define GPIO59_HX4700_LCD_PC1			59
+#define GPIO60_HX4700_CF_RNB			60
+#define GPIO61_HX4700_W3220_nRESET		61
+#define GPIO62_HX4700_LCD_nRESET		62
+#define GPIO63_HX4700_CPU_SS_nRESET		63
+#define GPIO65_HX4700_TSC2046_PEN_PU		65
+#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
+#define GPIO67_HX4700_EUART_PS			67
+#define GPIO70_HX4700_LCD_SLIN1			70
+#define GPIO71_HX4700_ASIC3_nRESET		71
+#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
+#define GPIO73_HX4700_LCD_UD_1			73
+#define GPIO75_HX4700_EARPHONE_nDET		75
+#define GPIO76_HX4700_USBC_PUEN			76
+#define GPIO81_HX4700_CPU_GP_nRESET		81
+#define GPIO82_HX4700_EUART_RESET		82
+#define GPIO83_HX4700_WLAN_nRESET		83
+#define GPIO84_HX4700_LCD_SQN			84
+#define GPIO85_HX4700_nPCE1			85
+#define GPIO88_HX4700_TSC2046_CS		88
+#define GPIO91_HX4700_FLASH_VPEN		91
+#define GPIO92_HX4700_HP_DRIVER			92
+#define GPIO93_HX4700_EUART_INT			93
+#define GPIO94_HX4700_KEY_MAIL			94
+#define GPIO95_HX4700_BATT_OFF			95
+#define GPIO96_HX4700_BQ24022_ISET2		96
+#define GPIO97_HX4700_nBL_DETECT		97
+#define GPIO99_HX4700_KEY_CONTACTS		99
+#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
+#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
+#define GPIO103_HX4700_SYNAPTICS_INT		103
+#define GPIO105_HX4700_nIR_ON			105
+#define GPIO106_HX4700_CPU_BT_nRESET		106
+#define GPIO107_HX4700_SPK_nSD			107
+#define GPIO109_HX4700_CODEC_nPDN		109
+#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
+#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
+#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
+#define GPIO114_HX4700_CF_RESET			114
+#define GPIO116_HX4700_CPU_HW_nRESET		116
+
+/*
+ * ASIC3 GPIOs
+ */
+
+#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
+#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
+
+#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
+#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
+#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
+#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
+#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
+#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
+#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
+#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
+#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
+#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
+#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
+#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
+#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
+#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
+#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
+#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
+
+#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
+#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
+#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
+#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
+#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
+#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
+#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
+#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
+#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
+#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
+#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
+#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
+#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
+#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
+#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
+#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
+
+/*
+ * EGPIOs
+ */
+
+#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
+#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
+#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
+#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
+#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
+#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
+#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
+#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
+#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
+
+#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 32bb4a2eb7f..6a1d9599334 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -91,13 +91,23 @@
 #define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
 
 /*
- * The next 16 interrupts are for board specific purposes.  Since
+ * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
+ * these.  There will be 16 IRQs by default.  If it is not enough,
+ * IRQ_BOARD_END is allowed be customized for each board, but keep
+ * the numbers within sensible limits and in descending order, so
+ * when multiple config options are selected, the maximum will be
+ * used.
  */
 #define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+
+#if defined(CONFIG_MACH_H4700)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
+#else
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+#endif
 
 #define IRQ_SA1111_START	(IRQ_BOARD_END)
 #define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
@@ -188,8 +198,6 @@
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS			(IRQ_BOARD_START + 32)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 07897e61d05..3ce4682eabb 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -283,6 +283,9 @@
 #define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
 #define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
 #define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO75_UART1_RXD	MFP_CFG_LPM(GPIO75, AF1, FLOAT)
+#define GPIO76_UART1_RXD	MFP_CFG_LPM(GPIO76, AF3, FLOAT)
+#define GPIO76_UART1_TXD	MFP_CFG_LPM(GPIO76, AF1, FLOAT)
 #define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
 #define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
 #define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
@@ -291,6 +294,9 @@
 #define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
 #define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
 #define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO77_UART1_CTS	MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO82_UART1_RTS	MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO82_UART1_CTS	MFP_CFG_LPM(GPIO82, AF3, FLOAT)
 #define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
 #define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
 #define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
@@ -299,13 +305,18 @@
 #define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
 #define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
 #define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO79_UART1_DSR	MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81, AF3, FLOAT)
 #define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
 #define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
 #define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
 #define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
 #define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO78_UART1_DCD	MFP_CFG_LPM(GPIO78, AF1, FLOAT)
 #define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
 #define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO80_UART1_RI		MFP_CFG_LPM(GPIO80, AF1, FLOAT)
 #define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
 
 /* UART2 */
@@ -438,6 +449,9 @@
 
 #define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
 #define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+#define GPIO6_NPIOW		MFP_CFG(GPIO6, AF3)
+#define GPIO7_NPIOS16		MFP_CFG(GPIO7, AF3)
+#define GPIO8_NPWAIT		MFP_CFG(GPIO8, AF3)
 
 #define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
 #define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index fb13c82ad6d..8721b801022 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -56,7 +56,6 @@
 #define GPIO_NR_PALMLD_LED_AMBER	94
 
 /* IDE */
-#define GPIO_NR_PALMLD_IDE_IRQ		95
 #define GPIO_NR_PALMLD_IDE_RESET	98
 #define GPIO_NR_PALMLD_IDE_PWEN		115
 
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index a6eeef8a075..fd8360c6839 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,6 +27,8 @@ extern void pxa27x_cpu_suspend(unsigned int);
 extern void pxa_cpu_resume(void);
 
 extern int pxa_pm_enter(suspend_state_t state);
+extern int pxa_pm_prepare(void);
+extern void pxa_pm_finish(void);
 
 /* NOTE: this is for PM debugging on Lubbock,  it's really a big
  * ugly, but let's keep the crap minimum here, instead of direct
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 6876e16c297..0b702693f45 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -16,4 +16,7 @@
 #define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+extern int __init pxa27x_set_pwrmode(unsigned int mode);
+
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 2d00db22b98..1920dc6b05d 100644
--- a/arch/arm/include/asm/hardware/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  *
  */
-
-#include <linux/interrupt.h>
+#ifndef _MACH_SHARPSL_PM
+#define _MACH_SHARPSL_PM
 
 struct sharpsl_charger_machinfo {
 	void (*init)(void);
@@ -100,7 +100,5 @@ extern struct sharpsl_pm_status sharpsl_pm;
 
 void sharpsl_battery_kick(void);
 void sharpsl_pm_led(int val);
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
 
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5706cea95d1..b54749413e9 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -36,7 +36,8 @@ static inline void flush(void)
 static inline void arch_decomp_setup(void)
 {
 	if (machine_is_littleton() || machine_is_intelmote2()
-			|| machine_is_csb726())
+	    || machine_is_csb726() || machine_is_stargate2()
+	    || machine_is_cm_x300())
 		UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index c872b9feb4d..55b3788fd1a 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,14 +42,17 @@
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
 
 #include "generic.h"
 
+#define GPIO_MMC1_CARD_DETECT	mfp_to_gpio(MFP_PIN_GPIO15)
+
 /* Littleton MFP configurations */
 static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	/* LCD */
@@ -98,6 +101,15 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	GPIO123_KP_MKOUT_2,
 	GPIO124_KP_MKOUT_3,
 	GPIO125_KP_MKOUT_4,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+	GPIO15_GPIO, /* card detect */
 };
 
 static struct resource smc91x_resources[] = {
@@ -179,15 +191,10 @@ static struct pxa2xx_spi_master littleton_spi_info = {
 	.num_chipselect		= 1,
 };
 
-static void littleton_tdo24m_cs(u32 cmd)
-{
-	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
-	.cs_control	= littleton_tdo24m_cs,
+	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
 };
 
 static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -202,16 +209,6 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
 
 static void __init littleton_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
-	if (err) {
-		pr_warning("failed to request GPIO for LCS CS\n");
-		return;
-	}
-
-	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
-
 	pxa2xx_set_spi_info(2, &littleton_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
 }
@@ -267,6 +264,56 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int littleton_mci_init(struct device *dev,
+			      irq_handler_t littleton_detect_int, void *data)
+{
+	int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+	err = gpio_request(gpio_cd, "mmc card detect");
+	if (err)
+		goto err_request_cd;
+
+	gpio_direction_input(gpio_cd);
+
+	err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "mmc card detect", data);
+	if (err) {
+		dev_err(dev, "failed to request card detect IRQ\n");
+		goto err_request_irq;
+	}
+	return 0;
+
+err_request_irq:
+	gpio_free(gpio_cd);
+err_request_cd:
+	return err;
+}
+
+static void littleton_mci_exit(struct device *dev, void *data)
+{
+	int gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+	free_irq(gpio_to_irq(gpio_cd), data);
+	gpio_free(gpio_cd);
+}
+
+static struct pxamci_platform_data littleton_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 		= littleton_mci_init,
+	.exit		= littleton_mci_exit,
+};
+
+static void __init littleton_init_mmc(void)
+{
+	pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition littleton_nand_partitions[] = {
 	[0] = {
@@ -407,6 +454,7 @@ static void __init littleton_init(void)
 
 	littleton_init_spi();
 	littleton_init_i2c();
+	littleton_init_mmc();
 	littleton_init_lcd();
 	littleton_init_keypad();
 	littleton_init_nand();
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c899bbd94dc..ca39669cffc 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -36,7 +36,7 @@
 #include <mach/pxa27x.h>
 #include <mach/magician.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
@@ -745,6 +745,14 @@ static struct platform_device strataflash = {
 };
 
 /*
+ * I2C
+ */
+
+static struct i2c_pxa_platform_data i2c_info = {
+	.fast_mode = 1,
+};
+
+/*
  * Platform devices
  */
 
@@ -771,7 +779,7 @@ static void __init magician_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(devices));
 
 	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
 	if (!err) {
@@ -779,7 +787,7 @@ static void __init magician_init(void)
 		pxa_set_ficp_info(&magician_ficp_info);
 	}
 	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
+	pxa_set_i2c_info(&i2c_info);
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a6c8429e975..f4dabf0273c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -46,7 +46,7 @@
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index ff8052ce0a0..4dc8c2ec40a 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -48,7 +48,7 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <media/soc_camera.h>
@@ -798,7 +798,7 @@ static void mioa701_restart(char c, const char *cmd)
 	arm_machine_restart('s', cmd);
 }
 
-struct gpio_ress global_gpios[] = {
+static struct gpio_ress global_gpios[] = {
 	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
 	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 471a853e548..ed70f281dd0 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -129,7 +129,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO81_GPIO,	/* wifi reset */
 
 	/* HDD */
-	GPIO95_GPIO,	/* HDD irq */
+	GPIO98_GPIO,	/* HDD reset */
 	GPIO115_GPIO,	/* HDD power */
 
 	/* MISC */
@@ -496,6 +496,14 @@ static struct platform_device palmld_asoc = {
 };
 
 /******************************************************************************
+ * HDD
+ ******************************************************************************/
+static struct platform_device palmld_hdd = {
+	.name	= "pata_palmld",
+	.id	= -1,
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmld_lcd_modes[] = {
@@ -524,30 +532,18 @@ static struct pxafb_mach_info palmld_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmld_pm_init(void)
+static void __init palmld_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMLD_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmld_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -559,6 +555,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmld_leds,
 	&power_supply,
 	&palmld_asoc,
+	&palmld_hdd,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
@@ -586,6 +583,7 @@ static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
 
+	palmld_pm_init();
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
 	pxa_set_ac97_info(&palmld_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 05bf979b78a..aae64a12a73 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -343,11 +344,18 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmt5_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmt5_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmt5_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -466,30 +474,18 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmt5_pm_init(void)
+static void __init palmt5_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMT5_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmt5_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -500,6 +496,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmt5_backlight,
 	&power_supply,
 	&palmt5_asoc,
+	&palmt5_gpio_vbus,
 };
 
 /* setup udc GPIOs initial state */
@@ -515,14 +512,15 @@ static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
 
+	palmt5_pm_init();
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
 	palmt5_udc_init();
 	pxa_set_ac97_info(&palmt5_ac97_pdata);
-	pxa_set_udc_info(&palmt5_udc_info);
 	pxa_set_ficp_info(&palmt5_ficp_platform_data);
 	pxa_set_keypad_info(&palmt5_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 43fcf2e8688..d823b09801d 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
 #include <mach/mfp-pxa25x.h>
 #include <mach/irda.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -107,6 +109,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
 	GPIO1_RST,	/* reset */
 	GPIO4_GPIO,	/* Hotsync button */
 	GPIO9_GPIO,	/* power detect */
+	GPIO15_GPIO,	/* earphone detect */
 	GPIO37_GPIO,	/* LCD power */
 	GPIO56_GPIO,	/* Backlight power */
 };
@@ -318,11 +321,18 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmte2_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTE2_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTE2_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmte2_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmte2_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -395,6 +405,21 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 };
 
 /******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmte2_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
+};
+
+static struct platform_device palmte2_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmte2_asoc_pdata,
+	},
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmte2_lcd_modes[] = {
@@ -429,6 +454,8 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmte2_backlight,
 	&power_supply,
+	&palmte2_asoc,
+	&palmte2_gpio_vbus,
 };
 
 /* setup udc GPIOs initial state */
@@ -447,7 +474,6 @@ static void __init palmte2_init(void)
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
-	pxa_set_udc_info(&palmte2_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e99a893c58a..6c15d84bde5 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -359,11 +360,18 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmtx_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
-	.gpio_pullup_inverted	= 0,
+};
+
+static struct platform_device palmtx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtx_udc_info,
+	},
 };
 
 /******************************************************************************
@@ -483,30 +491,18 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
-	0xe3a00101,	/* mov	r0,	#0x40000000 */
-	0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-	0xe590f008,	/* ldr	pc, [r0, #0x08] */
-};
-
-static int __init palmtx_pm_init(void)
+static void __init palmtx_pm_init(void)
 {
-	int i;
-
-	/* this is where the bootloader jumps */
-	addr = phys_to_virt(PALMTX_STR_BASE);
-
-	for (i = 0; i < 3; i++)
-		addr[i] = resume[i];
-
-	return 0;
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* copy the bootloader */
+	memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
 }
 
-device_initcall(palmtx_pm_init);
-#endif
-
 /******************************************************************************
  * Machine init
  ******************************************************************************/
@@ -517,6 +513,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmtx_backlight,
 	&power_supply,
 	&palmtx_asoc,
+	&palmtx_gpio_vbus,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -548,11 +545,11 @@ static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
+	palmtx_pm_init();
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
 	palmtx_udc_init();
 	pxa_set_ac97_info(&palmtx_ac97_pdata);
-	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6c12b5a3132..01791d74e08 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,7 +28,7 @@
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>
@@ -380,12 +380,12 @@ static struct pca953x_platform_data pca9536_data = {
 	.gpio_base	= NR_BUILTIN_GPIO,
 };
 
-static int gpio_bus_switch;
+static int gpio_bus_switch = -EINVAL;
 
 static int pcm990_camera_set_bus_param(struct soc_camera_link *link,
-		unsigned long flags)
+				       unsigned long flags)
 {
-	if (gpio_bus_switch <= 0) {
+	if (gpio_bus_switch < 0) {
 		if (flags == SOCAM_DATAWIDTH_10)
 			return 0;
 		else
@@ -404,25 +404,34 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
 {
 	int ret;
 
-	if (!gpio_bus_switch) {
+	if (gpio_bus_switch < 0) {
 		ret = gpio_request(NR_BUILTIN_GPIO, "camera");
 		if (!ret) {
 			gpio_bus_switch = NR_BUILTIN_GPIO;
 			gpio_direction_output(gpio_bus_switch, 0);
-		} else
-			gpio_bus_switch = -EINVAL;
+		}
 	}
 
-	if (gpio_bus_switch > 0)
+	if (gpio_bus_switch >= 0)
 		return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10;
 	else
 		return SOCAM_DATAWIDTH_10;
 }
 
+static void pcm990_camera_free_bus(struct soc_camera_link *link)
+{
+	if (gpio_bus_switch < 0)
+		return;
+
+	gpio_free(gpio_bus_switch);
+	gpio_bus_switch = -EINVAL;
+}
+
 static struct soc_camera_link iclink = {
 	.bus_id	= 0, /* Must match with the camera ID above */
 	.query_bus_param = pcm990_camera_query_bus_param,
 	.set_bus_param = pcm990_camera_set_bus_param,
+	.free_bus = pcm990_camera_free_bus,
 };
 
 /* Board I2C devices. */
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 884b174c8ea..7693355ee63 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -79,7 +79,7 @@ static int pxa_pm_valid(suspend_state_t state)
 	return -EINVAL;
 }
 
-static int pxa_pm_prepare(void)
+int pxa_pm_prepare(void)
 {
 	int ret = 0;
 
@@ -89,7 +89,7 @@ static int pxa_pm_prepare(void)
 	return ret;
 }
 
-static void pxa_pm_finish(void)
+void pxa_pm_finish(void)
 {
 	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
 		pxa_cpu_pm_fns->finish();
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 036bbde4d22..ac431ed1039 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -39,7 +39,7 @@
 #include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
@@ -214,13 +214,8 @@ static struct ads7846_platform_data poodle_ads7846_info = {
 	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static void ads7846_cs(u32 command)
-{
-	gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.cs_control		= ads7846_cs,
+	.gpio_cs		= POODLE_GPIO_TP_CS,
 };
 
 static struct spi_board_info poodle_spi_devices[] = {
@@ -236,14 +231,6 @@ static struct spi_board_info poodle_spi_devices[] = {
 
 static void __init poodle_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	gpio_direction_output(POODLE_GPIO_TP_CS, 1);
-
 	pxa2xx_set_spi_info(1, &poodle_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index a425ec71e65..ec68cc16b4e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -27,7 +27,7 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -204,6 +204,23 @@ static struct clk_lookup pxa27x_clkregs[] = {
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
 /*
+ * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
+ */
+static unsigned int pwrmode = PWRMODE_SLEEP;
+
+int __init pxa27x_set_pwrmode(unsigned int mode)
+{
+	switch (mode) {
+	case PWRMODE_SLEEP:
+	case PWRMODE_DEEPSLEEP:
+		pwrmode = mode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
@@ -254,7 +271,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		pxa27x_cpu_suspend(PWRMODE_SLEEP);
+		pxa27x_cpu_suspend(pwrmode);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b02d4544dc9..6f678d93bf4 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,7 +30,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/ssp.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -552,7 +552,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 }
 
 static struct platform_device *devices[] __initdata = {
-/*	&pxa_device_udc,	The UDC driver is PXA25x only */
+	&pxa27x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ff823999143..8241a63ea58 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -27,7 +27,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa930.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 047909a7665..55259f4756c 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -7,7 +7,7 @@
  *
  */
 
-#include <asm/hardware/sharpsl_pm.h>
+#include <mach/sharpsl_pm.h>
 
 /*
  * SharpSL SSP Driver
@@ -44,8 +44,6 @@ void corgi_lcdtg_hw_init(int mode);
 
 extern struct battery_thresh spitz_battery_levels_acin[];
 extern struct battery_thresh spitz_battery_levels_noac[];
-void sharpsl_pm_pxa_init(void);
-void sharpsl_pm_pxa_remove(void);
 int sharpsl_pm_pxa_read_max1111(int channel);
 
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 16b4ec67e3b..2546c066cd6 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -15,20 +15,69 @@
 #undef DEBUG
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/suspend.h>
+#include <linux/gpio.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/pm.h>
+#include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
+#include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
+
 #include "sharpsl.h"
 
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+
+#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
+
+/*
+ * Prototypes
+ */
+#ifdef CONFIG_PM
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_voltage(void);
+static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(struct work_struct *private_);
+static void sharpsl_battery_thread(struct work_struct *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
+static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
+
+
+
 struct battery_thresh spitz_battery_levels_acin[] = {
 	{ 213, 100},
 	{ 212,  98},
@@ -144,42 +193,789 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 #endif
 }
 
-void sharpsl_pm_pxa_init(void)
+static int get_percentage(int voltage)
+{
+	int i = sharpsl_pm.machinfo->bat_levels - 1;
+	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
+	struct battery_thresh *thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
+	else
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
+
+	while (i > 0 && (voltage > thresh[i].voltage))
+		i--;
+
+	return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+	int low_thresh, high_thresh;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON) {
+		high_thresh = sharpsl_pm.machinfo->status_high_acin;
+		low_thresh = sharpsl_pm.machinfo->status_low_acin;
+	} else {
+		high_thresh = sharpsl_pm.machinfo->status_high_noac;
+		low_thresh = sharpsl_pm.machinfo->status_low_noac;
+	}
+
+	if (voltage >= high_thresh)
+		return APM_BATTERY_STATUS_HIGH;
+	if (voltage >= low_thresh)
+		return APM_BATTERY_STATUS_LOW;
+	return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(struct work_struct *private_)
+{
+	int voltage, percent, apm_status, i = 0;
+
+	if (!sharpsl_pm.machinfo)
+		return;
+
+	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+	/* Corgi cannot confirm when battery fully charged so periodically kick! */
+	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
+			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
+		schedule_delayed_work(&toggle_charger, 0);
+
+	while(1) {
+		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+
+		if (voltage > 0) break;
+		if (i++ > 5) {
+			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+			break;
+		}
+	}
+
+	voltage = sharpsl_average_value(voltage);
+	apm_status = get_apm_status(voltage);
+	percent = get_percentage(voltage);
+
+	/* At low battery voltages, the voltage has a tendency to start
+           creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+		sharpsl_pm.battstat.mainbat_voltage = voltage;
+		sharpsl_pm.battstat.mainbat_status = apm_status;
+		sharpsl_pm.battstat.mainbat_percent = percent;
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
+			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+#ifdef CONFIG_BACKLIGHT_CORGI
+	/* If battery is low. limit backlight intensity to save power. */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+			sharpsl_pm.machinfo->backlight_limit(1);
+			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+		}
+	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+		sharpsl_pm.machinfo->backlight_limit(0);
+		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+	}
+#endif
+
+	/* Suspend if critical battery level */
+	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		dev_err(sharpsl_pm.dev, "Fatal Off\n");
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+void sharpsl_pm_led(int val)
+{
+	if (val == SHARPSL_LED_ERROR) {
+		dev_err(sharpsl_pm.dev, "Charging Error!\n");
+	} else if (val == SHARPSL_LED_ON) {
+		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
+	}
+}
+
+static void sharpsl_charge_on(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+	sharpsl_pm.full_count = 0;
+	sharpsl_pm.charge_mode = CHRG_ON;
+	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_OFF);
+	sharpsl_pm.charge_mode = CHRG_OFF;
+
+	schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+static void sharpsl_charge_error(void)
 {
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
-	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(struct work_struct *private_)
+{
+	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		sharpsl_charge_off();
+		return;
+	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+		sharpsl_charge_error();
+		return;
+	}
+
+	sharpsl_pm_led(SHARPSL_LED_ON);
+	sharpsl_pm.machinfo->charge(0);
+	mdelay(SHARPSL_CHARGE_WAIT_TIME);
+	sharpsl_pm.machinfo->charge(1);
+
+	sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+	sharpsl_average_clear();
+	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+		sharpsl_charge_on();
+	else if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_charge_off();
+
+	schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
+{
+	/* Delay the event slightly to debounce */
+	/* Must be a smaller delay than the chrg_full_isr below */
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+	sharpsl_pm.full_count++;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+		if (sharpsl_pm.charge_mode == CHRG_ON)
+			sharpsl_charge_off();
+	} else if (sharpsl_pm.full_count < 2) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+		schedule_delayed_work(&toggle_charger, 0);
+	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+		schedule_delayed_work(&toggle_charger, 0);
+	} else {
+		sharpsl_charge_off();
+		sharpsl_pm.charge_mode = CHRG_DONE;
+		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+	}
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC status change so
+   delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
+{
+	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+		return IRQ_HANDLED;
+
+	/* delay until after any ac interrupt */
+	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
+{
+	int is_fatal = 0;
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
+		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
+		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+		is_fatal = 1;
+	}
+
+	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+		apm_queue_event(APM_CRITICAL_SUSPEND);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM    10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+	sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+	int i, ad_val = 0;
+	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+		sharpsl_ad_index = 0;
+		return ad;
+	}
+
+	sharpsl_ad[sharpsl_ad_index] = ad;
+	sharpsl_ad_index++;
+	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+			sharpsl_ad[i] = sharpsl_ad[i+1];
+		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+	}
+	for (i=0; i < sharpsl_ad_index; i++)
+		ad_val += sharpsl_ad[i];
+
+	return (ad_val / sharpsl_ad_index);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+	int i, j, k, temp, sum = 0;
+
+	/* Find MAX val */
+	temp = val[0];
+	j=0;
+	for (i=1; i<5; i++) {
+		if (temp < val[i]) {
+			temp = val[i];
+			j = i;
+		}
+	}
+
+	/* Find MIN val */
+	temp = val[4];
+	k=4;
+	for (i=3; i>=0; i--) {
+		if (temp > val[i]) {
+			temp = val[i];
+			k = i;
+		}
+	}
+
+	for (i=0; i<5; i++)
+		if (i != j && i != k )
+			sum += val[i];
+
+	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+	return (sum/3);
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+	int val, i, buff[5];
+
+	/* Check battery temperature */
+	for (i=0; i<5; i++) {
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		sharpsl_pm.machinfo->measure_temp(1);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
+		sharpsl_pm.machinfo->measure_temp(0);
+	}
+
+	val = get_select_val(buff);
+
+	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+	if (val > sharpsl_pm.machinfo->charge_on_temp) {
+		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_check_battery_voltage(void)
+{
+	int val, i, buff[5];
+
+	/* disable charge, enable discharge */
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm.machinfo->discharge(1);
+	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery voltage */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	sharpsl_pm.machinfo->discharge(0);
+
+	val = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+	if (val < sharpsl_pm.machinfo->charge_on_volt)
+		return -1;
+
+	return 0;
+}
+#endif
+
+static int sharpsl_ac_check(void)
+{
+	int temp, i, buff[5];
+
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
+		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+	flush_scheduled_work();
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+	else
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+	return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+	/* Clear the reset source indicators as they break the bootloader upon reboot */
+	RCSR = 0x0f;
+	sharpsl_average_clear();
+	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+	return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	/* not charging and AC-IN! */
+
+	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
+		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+		sharpsl_pm.charge_mode = CHRG_OFF;
+		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+		sharpsl_off_charge_battery();
+	}
+
+	sharpsl_pm.machinfo->presuspend();
+
+	PEDR = 0xffffffff; /* clear it */
+
+	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+		RTSR &= RTSR_ALE;
+		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+	} else if (alarm_enable) {
+		RTSR &= RTSR_ALE;
+		RTAR = alarm_time;
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+	} else {
+		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+	}
+
+	pxa_pm_enter(state);
+
+	sharpsl_pm.machinfo->postsuspend();
+
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+	{
+		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		if(sharpsl_off_charge_battery()) {
+			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+			corgi_goto_sleep(alarm_time, alarm_enable, state);
+			return 1;
+		}
+		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+	}
+
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
+	{
+		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+		corgi_goto_sleep(alarm_time, alarm_enable, state);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+	unsigned long alarm_time = RTAR;
+	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+	corgi_goto_sleep(alarm_time, alarm_status, state);
+
+	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+		{}
+
+	if (sharpsl_pm.machinfo->earlyresume)
+		sharpsl_pm.machinfo->earlyresume();
+
+	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+	return 0;
+}
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+	int buff[5], temp, i, acin;
+
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+	/* Check AC-Adapter */
+	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		sharpsl_pm.machinfo->charge(0);
+		udelay(100);
+		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
+		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(1);
+
+	/* Check battery : check inserting battery ? */
+	for (i=0; i<5; i++) {
+		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+	}
+
+	if (sharpsl_pm.machinfo->discharge1)
+		sharpsl_pm.machinfo->discharge1(0);
+
+	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+		udelay(100);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.machinfo->discharge(0);
+	}
+
+	temp = get_select_val(buff);
+	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
+
+	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
+		return -1;
+	return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
+	sharpsl_pm.machinfo->charge(0);
+	sharpsl_pm_led(SHARPSL_LED_ERROR);
+	sharpsl_pm.charge_mode = CHRG_ERROR;
+	return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+	int time;
+
+	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+	if (sharpsl_pm.charge_mode == CHRG_OFF) {
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+		/* AC Check */
+		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+			return sharpsl_off_charge_error();
+
+		/* Start Charging */
+		sharpsl_pm_led(SHARPSL_LED_ON);
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+
+		sharpsl_pm.charge_mode = CHRG_ON;
+		sharpsl_pm.full_count = 0;
+
+		return 1;
+	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
+		return 1;
+	}
+
+	if (sharpsl_pm.full_count == 0) {
+		int time;
+
+		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+			return sharpsl_off_charge_error();
+
+		sharpsl_pm.machinfo->charge(0);
+		mdelay(SHARPSL_CHARGE_WAIT_TIME);
+		sharpsl_pm.machinfo->charge(1);
+		sharpsl_pm.charge_mode = CHRG_ON;
+
+		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+		time = RCNR;
+		while(1) {
+			/* Check if any wakeup event had occurred */
+			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+				return 0;
+			/* Check for timeout */
+			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+				return 1;
+			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
+				sharpsl_pm.full_count++;
+				sharpsl_pm.machinfo->charge(0);
+				mdelay(SHARPSL_CHARGE_WAIT_TIME);
+				sharpsl_pm.machinfo->charge(1);
+				return 1;
+			}
+		}
+	}
+
+	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+	time = RCNR;
+	while(1) {
+		/* Check if any wakeup event had occurred */
+		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			return 0;
+		/* Check for timeout */
+		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+				sharpsl_pm.full_count = 0;
+			}
+			sharpsl_pm.full_count++;
+			return 1;
+		}
+		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+			sharpsl_pm_led(SHARPSL_LED_OFF);
+			sharpsl_pm.machinfo->charge(0);
+			sharpsl_pm.charge_mode = CHRG_DONE;
+			return 1;
+		}
+	}
+}
+#else
+#define sharpsl_pm_suspend	NULL
+#define sharpsl_pm_resume	NULL
+#endif
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+	info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+	if (sharpsl_pm.charge_mode == CHRG_ON)
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	else
+		info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+	info->battery_flag = (1 << info->battery_status);
+	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+#ifdef CONFIG_PM
+static struct platform_suspend_ops sharpsl_pm_ops = {
+	.prepare	= pxa_pm_prepare,
+	.finish		= pxa_pm_finish,
+	.enter		= corgi_pxa_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+#endif
+
+static int __init sharpsl_pm_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	sharpsl_pm.dev = &pdev->dev;
+	sharpsl_pm.machinfo = pdev->dev.platform_data;
+	sharpsl_pm.charge_mode = CHRG_OFF;
+	sharpsl_pm.flags = 0;
+
+	init_timer(&sharpsl_pm.ac_timer);
+	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+	init_timer(&sharpsl_pm.chrg_full_timer);
+	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
+	sharpsl_pm.machinfo->init();
+
+	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
+	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
+	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
+	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
 
 	/* Register interrupt handlers */
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
+	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
 	{
 		/* Register interrupt handler. */
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
+		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+	if (ret != 0)
+		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
+
+	apm_get_power_status = sharpsl_apm_get_power_status;
+
+#ifdef CONFIG_PM
+	suspend_set_ops(&sharpsl_pm_ops);
+#endif
+
+	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+	return 0;
 }
 
-void sharpsl_pm_pxa_remove(void)
+static int sharpsl_pm_remove(struct platform_device *pdev)
 {
+	suspend_set_ops(NULL);
+
+	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
 	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
 
@@ -188,4 +984,39 @@ void sharpsl_pm_pxa_remove(void)
 
 	if (sharpsl_pm.machinfo->batfull_irq)
 		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
+	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
+	gpio_free(sharpsl_pm.machinfo->gpio_acin);
+
+	if (sharpsl_pm.machinfo->exit)
+		sharpsl_pm.machinfo->exit();
+
+	del_timer_sync(&sharpsl_pm.chrg_full_timer);
+	del_timer_sync(&sharpsl_pm.ac_timer);
+
+	return 0;
 }
+
+static struct platform_driver sharpsl_pm_driver = {
+	.probe		= sharpsl_pm_probe,
+	.remove		= sharpsl_pm_remove,
+	.suspend	= sharpsl_pm_suspend,
+	.resume		= sharpsl_pm_resume,
+	.driver		= {
+		.name		= "sharpsl-pm",
+	},
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+	return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+	platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 5a45fe340a1..dda310fe71c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -13,19 +13,11 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/backlight.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
@@ -34,31 +26,22 @@
 #include <linux/mtd/sharpsl.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
 
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
-#include <mach/sharpsl.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -317,13 +300,8 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
 
-static void spitz_ads7846_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.cs_control		= spitz_ads7846_cs,
+	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
 };
 
 static void spitz_bl_kick_battery(void)
@@ -347,22 +325,12 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
-static void spitz_lcdcon_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.cs_control	= spitz_lcdcon_cs,
+	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
 };
 
-static void spitz_max1111_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.cs_control	= spitz_max1111_cs,
+	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info spitz_spi_devices[] = {
@@ -392,30 +360,6 @@ static struct spi_board_info spitz_spi_devices[] = {
 
 static void __init spitz_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
-	if (err)
-		goto err_free_3;
-
 	if (machine_is_akita()) {
 		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
 		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -423,14 +367,6 @@ static void __init spitz_init_spi(void)
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
-	return;
-
-err_free_3:
-	gpio_free(SPITZ_GPIO_MAX1111_CS);
-err_free_2:
-	gpio_free(SPITZ_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(SPITZ_GPIO_ADS7846_CS);
 }
 #else
 static inline void spitz_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 2e4490562c9..724ffb03031 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -41,7 +41,6 @@ static void spitz_charger_init(void)
 {
 	pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
 	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
-	sharpsl_pm_pxa_init();
 }
 
 static void spitz_measure_temp(int on)
@@ -182,7 +181,7 @@ unsigned long spitzpm_read_devdata(int type)
 
 struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.init             = spitz_charger_init,
-	.exit             = sharpsl_pm_pxa_remove,
+	.exit             = NULL,
 	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
 	.gpio_acin        = SPITZ_GPIO_AC_IN,
 	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
new file mode 100644
index 00000000000..3b205b69f3f
--- /dev/null
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -0,0 +1,796 @@
+/*
+ *  linux/arch/arm/mach-pxa/stargate2.c
+ *
+ *  Author:	Ed C. Epp
+ *  Created:	Nov 05, 2002
+ *  Copyright:	Intel Corp.
+ *
+ *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <plat/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x-udc.h>
+
+#include <linux/spi/spi.h>
+#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Bluetooth */
+#define SG2_BT_RESET		81
+
+/* SD */
+#define SG2_GPIO_nSD_DETECT	90
+#define SG2_SD_POWER_ENABLE	89
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+	GPIO15_nCS_1, /* SRAM */
+	/* SMC91x */
+	GPIO80_nCS_4,
+	GPIO40_GPIO, /*cable detect?*/
+	/* Device Identification for wakeup*/
+	GPIO102_GPIO,
+
+	/* Button */
+	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+	/* DA9030 */
+	GPIO1_GPIO,
+
+	/* Compact Flash */
+	GPIO79_PSKTSEL,
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO120_GPIO, /* Buff ctrl */
+	GPIO108_GPIO, /* Power ctrl */
+	GPIO82_GPIO, /* Reset */
+	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO90_GPIO, /* nSD detect */
+	GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+	/* Bluetooth */
+	GPIO81_GPIO, /* reset */
+
+	/* cc2420 802.15.4 radio */
+	GPIO22_GPIO,		/* CC_RSTN  (out)*/
+	GPIO114_GPIO,		/* CC_FIFO (in) */
+	GPIO116_GPIO, 		/* CC_CCA (in) */
+	GPIO0_GPIO,		/* CC_FIFOP (in) */
+	GPIO16_GPIO,		/* CCSFD (in) */
+	GPIO39_GPIO,		/* CSn (out) */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP 3 - 802.15.4 radio */
+	GPIO39_GPIO, /* chip select */
+	GPIO34_SSP3_SCLK,
+	GPIO35_SSP3_TXD,
+	GPIO41_SSP3_RXD,
+
+	/* SSP 2 */
+	GPIO11_SSP2_RXD,
+	GPIO38_SSP2_TXD,
+	GPIO36_SSP2_SCLK,
+	GPIO37_GPIO, /* chip select */
+
+	/* SSP 1 */
+	GPIO26_SSP1_RXD,
+	GPIO25_SSP1_TXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_GPIO, /* chip select */
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* Basic sensor board */
+	GPIO96_GPIO,	/* accelerometer interrupt */
+	GPIO99_GPIO,	/* ADC interrupt */
+
+	/* Connector pins specified as gpios */
+	GPIO94_GPIO, /* large basic connector pin 14 */
+	GPIO10_GPIO, /* large basic connector pin 23 */
+
+	/* SHT15 */
+	GPIO100_GPIO,
+	GPIO98_GPIO,
+};
+
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+	int err;
+	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+	if (err) {
+		printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
+		return err;
+	}
+	gpio_direction_output(SG2_BT_RESET, 1);
+	mdelay(5);
+	/* now reset it - 5 msec minimum */
+	gpio_set_value(SG2_BT_RESET, 0);
+	mdelay(10);
+	gpio_set_value(SG2_BT_RESET, 1);
+	gpio_free(SG2_BT_RESET);
+	return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+	{
+		.name = "sg2:red",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:blue",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:green",
+		.flags = DA9030_LED_RATE_ON,
+	},
+};
+
+static struct sht15_platform_data platform_data_sht15 = {
+	.gpio_data =  100,
+	.gpio_sck  =  98,
+};
+
+static struct platform_device sht15 = {
+	.name = "sht15",
+	.id = -1,
+	.dev = {
+		.platform_data = &platform_data_sht15,
+	},
+};
+
+static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
+	{
+		.dev = &sht15.dev,
+		.supply = "vcc",
+	},
+};
+
+enum stargate2_ldos{
+	vcc_vref,
+	vcc_cc2420,
+	/* a mote connector? */
+	vcc_mica,
+	/* the CSR bluecore chip */
+	vcc_bt,
+	/* The two voltages available to sensor boards */
+	vcc_sensor_1_8,
+	vcc_sensor_3,
+	/* directly connected to the pxa27x */
+	vcc_sram_ext,
+	vcc_pxa_pll,
+	vcc_pxa_usim, /* Reference voltage for certain gpios */
+	vcc_pxa_mem,
+	vcc_pxa_flash,
+	vcc_pxa_core, /*Dc-Dc buck not yet supported */
+	vcc_lcd,
+	vcc_bb,
+	vcc_bbio, /*not sure!*/
+	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo.  Unfortunately this information is
+ * not generally available.  More information has been requested from Xbow.
+ */
+static struct regulator_init_data stargate2_ldo_init_data[] = {
+	[vcc_bbio] = {
+		.constraints = { /* board default 1.8V */
+			.name = "vcc_bbio",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_bb] = {
+		.constraints = { /* board default 2.8V */
+			.name = "vcc_bb",
+			.min_uV = 2700000,
+			.max_uV = 3000000,
+		},
+	},
+	[vcc_pxa_flash] = {
+		.constraints = {/* default is 1.8V */
+			.name = "vcc_pxa_flash",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_cc2420] = { /* also vcc_io */
+		.constraints = {
+			/* board default is 2.8V */
+			.name = "vcc_cc2420",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_vref] = { /* Reference for what? */
+		.constraints = { /* default 1.8V */
+			.name = "vcc_vref",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sram_ext] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_sram_ext",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_mica] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_mica",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_bt] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_bt",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_lcd] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_lcd",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_io] = { /* Same or higher than everything
+			  * bar vccbat and vccusb */
+		.constraints = { /* default 2.8V */
+			.name = "vcc_io",
+			.min_uV = 2692000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_sensor_1_8] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_sensor_1_8",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sensor_3] = { /* curiously default 2.8V */
+		.constraints = {
+			.name = "vcc_sensor_3",
+			.min_uV = 2800000,
+			.max_uV = 3000000,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
+		.consumer_supplies = stargate2_sensor_3_con,
+	},
+	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+		.constraints = {
+			.name = "vcc_pxa_pll",
+			.min_uV = 1170000,
+			.max_uV = 1430000,
+		},
+	},
+	[vcc_pxa_usim] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_usim",
+			.min_uV = 1710000,
+			.max_uV = 2160000,
+		},
+	},
+	[vcc_pxa_mem] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_mem",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+	{
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_2,
+		.platform_data = &stargate2_leds[0],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_3,
+		.platform_data = &stargate2_leds[2],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_4,
+		.platform_data = &stargate2_leds[1],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO2,
+		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &stargate2_ldo_init_data[vcc_bb],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO4,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO6,
+		.platform_data = &stargate2_ldo_init_data[vcc_vref],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO7,
+		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO8,
+		.platform_data = &stargate2_ldo_init_data[vcc_mica],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO9,
+		.platform_data = &stargate2_ldo_init_data[vcc_bt],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO11,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO15,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO17,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+	}, {
+		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+		.id = DA9030_ID_LDO18,
+		.platform_data = &stargate2_ldo_init_data[vcc_io],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+	},
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+	.subdevs = stargate2_da9030_subdevs,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name = "smc91x-regs",
+		.start = (PXA_CS4_PHYS + 0x300),
+		.end = (PXA_CS4_PHYS + 0xfffff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_GPIO(40),
+		.end = IRQ_GPIO(40),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+	| SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev = {
+		.platform_data = &stargate2_smc91x_info,
+	},
+};
+
+
+
+static struct pxamci_platform_data stargate2_mci_platform_data;
+
+/*
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert / eject.
+ */
+static int stargate2_mci_init(struct device *dev,
+			      irq_handler_t stargate2_detect_int,
+			      void *data)
+{
+	int err;
+
+	err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
+	if (err) {
+		printk(KERN_ERR "Can't get the gpio for SD power control");
+		goto return_err;
+	}
+	gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
+
+	err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
+	if (err) {
+		printk(KERN_ERR "Can't get the sd detect gpio");
+		goto free_power_en;
+	}
+	gpio_direction_input(SG2_GPIO_nSD_DETECT);
+	/* Delay to allow for full insertion */
+	stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+			  stargate2_detect_int,
+			  IRQ_TYPE_EDGE_BOTH,
+			  "MMC card detect",
+			  data);
+	if (err) {
+		printk(KERN_ERR "can't request MMC card detect IRQ\n");
+		goto free_nsd_detect;
+	}
+	return 0;
+
+ free_nsd_detect:
+	gpio_free(SG2_GPIO_nSD_DETECT);
+ free_power_en:
+	gpio_free(SG2_SD_POWER_ENABLE);
+ return_err:
+	return err;
+}
+
+/**
+ * stargate2_mci_setpower() - set state of mmc power supply
+ *
+ * Very simple control. Either it is on or off and is controlled by
+ * a gpio pin */
+static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+}
+
+static void stargate2_mci_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+	gpio_free(SG2_SD_POWER_ENABLE);
+	gpio_free(SG2_GPIO_nSD_DETECT);
+}
+
+static struct pxamci_platform_data stargate2_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init = stargate2_mci_init,
+	.setpower = stargate2_mci_setpower,
+	.exit = stargate2_mci_exit,
+};
+
+static struct mtd_partition stargate2flash_partitions[] = {
+	{
+		.name = "Bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = 0,
+	}, {
+		.name = "Kernel",
+		.size = 0x00200000,
+		.offset = 0x00040000,
+		.mask_flags = 0
+	}, {
+		.name = "Filesystem",
+		.size = 0x01DC0000,
+		.offset = 0x00240000,
+		.mask_flags = 0
+	},
+};
+
+static struct resource flash_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+	.map_name = "cfi_probe",
+	.parts = stargate2flash_partitions,
+	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+	.name = "PXA27xOnChipROM",
+	.width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+	.name = "pxa2xx-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &stargate2_flash_data,
+	},
+	.resource = &flash_resources,
+	.num_resources = 1,
+};
+
+/*
+ * SRAM - The Stargate 2 has 32MB of SRAM.
+ *
+ * Here it is made available as an MTD. This will then
+ * typically have a cifs filesystem created on it to provide
+ * fast temporary storage.
+ */
+static struct resource sram_resources = {
+	.start = PXA_CS1_PHYS,
+	.end = PXA_CS1_PHYS + SZ_32M-1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platdata_mtd_ram stargate2_sram_pdata = {
+	.mapname = "Stargate2 SRAM",
+	.bankwidth = 2,
+};
+
+static struct platform_device stargate2_sram = {
+	.name = "mtd-ram",
+	.id = 0,
+	.resource = &sram_resources,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &stargate2_sram_pdata,
+	},
+};
+
+static struct pcf857x_platform_data platform_data_pcf857x = {
+	.gpio_base = 128,
+	.n_latch = 0,
+	.setup = NULL,
+	.teardown = NULL,
+	.context = NULL,
+};
+
+static struct at24_platform_data pca9500_eeprom_pdata = {
+	.byte_len = 256,
+	.page_size = 4,
+};
+
+
+static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
+	/* Techically this a pca9500 - but it's compatible with the 8574
+	 * for gpio expansion and the 24c02 for eeprom access.
+	 */
+	{
+		.type = "pcf8574",
+		.addr =  0x27,
+		.platform_data = &platform_data_pcf857x,
+	}, {
+		.type = "24c02",
+		.addr = 0x57,
+		.platform_data = &pca9500_eeprom_pdata,
+	}, {
+		.type = "max1238",
+		.addr = 0x35,
+	}, { /* ITS400 Sensor board only */
+		.type = "max1363",
+		.addr = 0x34,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tsl2561",
+		.addr = 0x49,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tmp175",
+		.addr = 0x4A,
+		.irq = IRQ_GPIO(96),
+	},
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &stargate2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+	.num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias = "lis3l02dq",
+		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &staccel_chip_info,
+		.irq = IRQ_GPIO(96),
+	}, {
+		.modalias = "cc2420",
+		.max_speed_hz = 6500000,
+		.bus_num = 3,
+		.chip_select = 0,
+		.controller_data = &cc2420_info,
+	},
+};
+
+static void sg2_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+		break;
+	}
+}
+
+/* Board doesn't support cable detection - so always lie and say
+ * something is there.
+ */
+static int sg2_udc_detect(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
+	.udc_is_connected	= sg2_udc_detect,
+	.udc_command		= sg2_udc_command,
+};
+
+static struct platform_device *stargate2_devices[] = {
+	&stargate2_flash_device,
+	&stargate2_sram,
+	&smc91x_device,
+	&sht15,
+};
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+	.fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
+
+static void __init stargate2_init(void)
+{
+	/* This is probably a board specific hack as this must be set
+	   prior to connecting the MFP stuff up. */
+	MECR &= ~MECR_NOS;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+
+	/* spi chip selects */
+	gpio_direction_output(37, 0);
+	gpio_direction_output(24, 0);
+	gpio_direction_output(39, 0);
+
+	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
+	i2c_register_board_info(1,
+				ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
+	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+	pxa_set_i2c_info(&i2c_pdata);
+
+	pxa_set_mci_info(&stargate2_mci_platform_data);
+
+	pxa_set_udc_info(&stargate2_udc_info);
+
+	stargate2_reset_bluetooth();
+}
+
+MACHINE_START(STARGATE2, "Stargate 2")
+	.phys_io = 0x40000000,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io = pxa_map_io,
+	.init_irq = pxa27x_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = stargate2_init,
+	.boot_params = 0xA0000100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index fb0294bd431..c31e601eb49 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -35,21 +35,25 @@ static void tosa_bt_off(struct tosa_bt_data *data)
 	gpio_set_value(data->gpio_reset, 0);
 }
 
-static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+static int tosa_bt_set_block(void *data, bool blocked)
 {
-	pr_info("BT_RADIO going: %s\n",
-			state == RFKILL_STATE_ON ? "on" : "off");
+	pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on");
 
-	if (state == RFKILL_STATE_ON) {
+	if (!blocked) {
 		pr_info("TOSA_BT: going ON\n");
 		tosa_bt_on(data);
 	} else {
 		pr_info("TOSA_BT: going OFF\n");
 		tosa_bt_off(data);
 	}
+
 	return 0;
 }
 
+static const struct rfkill_ops tosa_bt_rfkill_ops = {
+	.set_block = tosa_bt_set_block,
+};
+
 static int tosa_bt_probe(struct platform_device *dev)
 {
 	int rc;
@@ -70,18 +74,14 @@ static int tosa_bt_probe(struct platform_device *dev)
 	if (rc)
 		goto err_pwr_dir;
 
-	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH,
+			   &tosa_bt_rfkill_ops, data);
 	if (!rfk) {
 		rc = -ENOMEM;
 		goto err_rfk_alloc;
 	}
 
-	rfk->name = "tosa-bt";
-	rfk->toggle_radio = tosa_bt_toggle_radio;
-	rfk->data = data;
-#ifdef CONFIG_RFKILL_LEDS
-	rfk->led_trigger.name = "tosa-bt";
-#endif
+	rfkill_set_led_trigger_name(rfk, "tosa-bt");
 
 	rc = rfkill_register(rfk);
 	if (rc)
@@ -92,9 +92,7 @@ static int tosa_bt_probe(struct platform_device *dev)
 	return 0;
 
 err_rfkill:
-	if (rfk)
-		rfkill_free(rfk);
-	rfk = NULL;
+	rfkill_destroy(rfk);
 err_rfk_alloc:
 	tosa_bt_off(data);
 err_pwr_dir:
@@ -113,8 +111,10 @@ static int __devexit tosa_bt_remove(struct platform_device *dev)
 
 	platform_set_drvdata(dev, NULL);
 
-	if (rfk)
+	if (rfk) {
 		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
 	rfk = NULL;
 
 	tosa_bt_off(data);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index a0bd46ef5d3..117ad5920e5 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -31,7 +31,6 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
-#include <linux/rfkill.h>
 #include <linux/spi/spi.h>
 
 #include <asm/setup.h>
@@ -40,7 +39,7 @@
 #include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f79c9cb70ae..825f540176d 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,7 +47,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index dd031cc4184..d33c232b686 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -45,7 +45,7 @@
 #include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/regs-uart.h>
 #include <mach/viper.h>
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c256c57642c..cefd1c0a854 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,7 +21,7 @@
 #include <linux/gpio.h>
 
 #include <mach/pxa300.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/zylonite.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index b6ec1062777..d4cfa214538 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP
 config REALVIEW_EB_ARM11MP_REVB
 	bool "Support ARM11MPCore RevB tile"
 	depends on REALVIEW_EB_ARM11MP
-	default n
 	help
 	  Enable support for the ARM11MPCore RevB tile on the Realview
 	  platform. Since there are device address differences, a
@@ -48,6 +47,15 @@ config MACH_REALVIEW_PB1176
 	help
 	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
 
+config REALVIEW_PB1176_SECURE_FLASH
+	bool "Allow access to the secure flash memory block"
+	depends on MACH_REALVIEW_PB1176
+	default n
+	help
+	  Select this option if Linux will only run in secure mode on the
+	  RealView PB1176 platform and access to the secure flash memory
+	  block (64MB @ 0x3c000000) is required.
+
 config MACH_REALVIEW_PBA8
 	bool "Support RealView/PB-A8 platform"
 	select CPU_V7
@@ -58,6 +66,13 @@ config MACH_REALVIEW_PBA8
 	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
 	  PCI-E and Compact Flash.
 
+config MACH_REALVIEW_PBX
+	bool "Support RealView/PBX platform"
+	select ARM_GIC
+	select HAVE_PATA_PLATFORM
+	help
+	  Include support for the ARM(R) RealView PBX platform.
+
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
 	depends on !MACH_REALVIEW_PB1176
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 7bea8ffc4b5..e704edb733c 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -7,5 +7,7 @@ obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 076acbc5070..9ea9c05093c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -48,6 +48,9 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
 #include "core.h"
 #include "clock.h"
 
@@ -578,21 +581,22 @@ void realview_leds_event(led_event_t ledevt)
 {
 	unsigned long flags;
 	u32 val;
+	u32 led = 1 << smp_processor_id();
 
 	local_irq_save(flags);
 	val = readl(VA_LEDS_BASE);
 
 	switch (ledevt) {
 	case led_idle_start:
-		val = val & ~REALVIEW_SYS_LED0;
+		val = val & ~led;
 		break;
 
 	case led_idle_end:
-		val = val | REALVIEW_SYS_LED0;
+		val = val | led;
 		break;
 
 	case led_timer:
-		val = val ^ REALVIEW_SYS_LED1;
+		val = val ^ REALVIEW_SYS_LED7;
 		break;
 
 	case led_halted:
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 21c08637683..59a337ba4be 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
-#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base;
-#endif
 extern void __iomem *timer0_va_base;
 extern void __iomem *timer1_va_base;
 extern void __iomem *timer2_va_base;
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 268d7701fa9..794a8d91a6a 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -62,111 +62,6 @@
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2	-1
-#define IRQ_EB11MP_UART3	-1
-#define IRQ_EB11MP_CLCD		-1
-#define IRQ_EB11MP_DMA		-1
-#define IRQ_EB11MP_WDOG		-1
-#define IRQ_EB11MP_GPIO0	-1
-#define IRQ_EB11MP_GPIO1	-1
-#define IRQ_EB11MP_GPIO2	-1
-#define IRQ_EB11MP_SCI		-1
-#define IRQ_EB11MP_SSP		-1
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 858eea7b1ad..98f8e7eeacc 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -32,6 +32,8 @@
 #define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
 #define REALVIEW_PB1176_FLASH_BASE		0x30000000
 #define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
+#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
 
 #define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
 #define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
@@ -71,82 +73,4 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 53ea0e7a126..f0d68e0fea0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,105 +81,4 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b16e5..4dfc67a4f45 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
 #define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
 #define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
 
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START			32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h
new file mode 100644
index 00000000000..848bfff6d8f
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pbx.h
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBX_H
+#define __ASM_ARCH_BOARD_PBX_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
+#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
+#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
+#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
+#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
+#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
+#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
+#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
+#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
+#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
+#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
+#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_FLASH0_BASE		0x40000000
+#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PBX_FLASH1_BASE		0x44000000
+#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
+#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
+#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+/*
+ * Tile-specific addresses
+ */
+#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
+#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
+#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
+#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
+#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
+#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
+
+#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
+
+/*
+ * PBX PCI regions
+ */
+#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_PBX_PROC_MASK          0xFF000000
+#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
+#define REALVIEW_PBX_PROC_ARM9          0x02000000
+#define REALVIEW_PBX_PROC_ARM11         0x04000000
+#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
+#define REALVIEW_PBX_PROC_A9MP          0x0C000000
+#define REALVIEW_PBX_PROC_A8            0x0E000000
+
+#define check_pbx_proc(proc_type)                                            \
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
+	== proc_type)
+
+#ifdef CONFIG_MACH_REALVIEW_PBX
+#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
+#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
+#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
+#else
+#define core_tile_pbx11mp()     0
+#define core_tile_pbxa9mp()     0
+#define core_tile_pbxa8()       0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 92dbcb9e179..932d8af1806 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -12,7 +12,8 @@
 
 #if defined(CONFIG_MACH_REALVIEW_EB) || \
     defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8)
+    defined(CONFIG_MACH_REALVIEW_PBA8) || \
+    defined(CONFIG_MACH_REALVIEW_PBX)
 #ifndef DEBUG_LL_UART_OFFSET
 #define DEBUG_LL_UART_OFFSET	0x00009000
 #elif DEBUG_LL_UART_OFFSET != 0x00009000
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
new file mode 100644
index 00000000000..204d5378f30
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
new file mode 100644
index 00000000000..2410d4f8ddd
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
new file mode 100644
index 00000000000..34e255add21
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 00000000000..86792a9f2ab
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START			32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
+#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
+#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC		-1
+#define IRQ_PBA8_SCTL		-1
+
+#define NR_GIC_PBA8		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBA8
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
new file mode 100644
index 00000000000..deaad4302b1
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START			32
+
+/* L220
+#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
+#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
+#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC		-1
+#define IRQ_PBX_SCTL		-1
+
+#define NR_GIC_PBX		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBX
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBX */
+
+#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index fe5cb987aa2..78854f2fa32 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -22,10 +22,11 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
 
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
deleted file mode 100644
index d55802d645a..00000000000
--- a/arch/arm/mach-realview/include/mach/scu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL		0x00
-#define SCU_CONFIG		0x04
-#define SCU_CPU_STATUS		0x08
-#define SCU_INVALIDATE		0x0c
-#define SCU_FPGA_REVISION	0x10
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 415d634d52a..83050378ffd 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -24,6 +24,7 @@
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
 #include <mach/board-pba8.h>
+#include <mach/board-pbx.h>
 
 #define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
 #define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
@@ -43,6 +44,8 @@ static inline unsigned long get_uart_base(void)
 		return REALVIEW_PB1176_UART0_BASE;
 	else if (machine_is_realview_pba8())
 		return REALVIEW_PBA8_UART0_BASE;
+	else if (machine_is_realview_pbx())
+		return REALVIEW_PBX_UART0_BASE;
 	else
 		return 0;
 }
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 1c01d13460f..60b4e111f45 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -9,196 +9,18 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
 #include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/io.h>
 
-#include <asm/hardware/arm_twd.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or IPI_TIMER
- */
-void local_timer_interrupt(void)
-{
-	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
-	clk->event_handler(clk);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/* set up by the platform code */
-void __iomem *twd_base;
-
-static unsigned long mpcore_timer_rate;
-
-static void local_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
-		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
-			| TWD_TIMER_CONTROL_PERIODIC;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int local_timer_set_next_event(unsigned long evt,
-				      struct clock_event_device *unused)
-{
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
-
-	return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-int local_timer_ack(void)
-{
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
-		return 1;
-	}
-
-	return 0;
-}
-
-static void __cpuinit twd_calibrate_rate(void)
-{
-	unsigned long load, count;
-	u64 waitjiffies;
-
-	/*
-	 * If this is the first time round, we need to work out how fast
-	 * the timer ticks
-	 */
-	if (mpcore_timer_rate == 0) {
-		printk("Calibrating local timer... ");
-
-		/* Wait for a tick to start */
-		waitjiffies = get_jiffies_64() + 1;
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		/* OK, now the tick has started, let's get the timer going */
-		waitjiffies += 5;
-
-				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
-				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
-		mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
-		printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
-			(mpcore_timer_rate / 100000) % 100);
-	}
-
-	load = mpcore_timer_rate / HZ;
-
-	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
-}
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
 
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-	unsigned long flags;
-
-	twd_calibrate_rate();
-
-	clk->name		= "local_timer";
-	clk->features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	clk->rating		= 350;
-	clk->set_mode		= local_timer_set_mode;
-	clk->set_next_event	= local_timer_set_next_event;
-	clk->irq		= IRQ_LOCALTIMER;
-	clk->cpumask		= cpumask_of(cpu);
-	clk->shift		= 20;
-	clk->mult		= div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
-	clk->max_delta_ns	= clockevent_delta2ns(0xffffffff, clk);
-	clk->min_delta_ns	= clockevent_delta2ns(0xf, clk);
-
-	/* Make sure our local interrupt controller has this enabled */
-	local_irq_save(flags);
-	get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
-	local_irq_restore(flags);
-
-	clockevents_register_device(clk);
-}
-
-/*
- * take a local timer down
- */
-void __cpuexit local_timer_stop(void)
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
 }
-
-#else	/* CONFIG_LOCAL_TIMERS */
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
-	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
-				  CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 400;
-	clk->mult               = 1;
-	clk->set_mode		= dummy_timer_set_mode;
-	clk->broadcast		= smp_timer_broadcast;
-	clk->cpumask		= cpumask_of(cpu);
-
-	clockevents_register_device(clk);
-}
-
-#endif	/* !CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 30a9c68591f..ac0e83f1cc3 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,10 +19,12 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
+#include <asm/localtimer.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
-#include <mach/scu.h>
+#include <mach/board-pbx.h>
+#include <asm/smp_scu.h>
 
 #include "core.h"
 
@@ -40,35 +42,19 @@ static void __iomem *scu_base_addr(void)
 		return __io_address(REALVIEW_EB11MP_SCU_BASE);
 	else if (machine_is_realview_pb11mp())
 		return __io_address(REALVIEW_TC11MP_SCU_BASE);
+	else if (machine_is_realview_pbx() &&
+		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
+		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
 	else
 		return (void __iomem *)0;
 }
 
-static unsigned int __init get_core_count(void)
+static inline unsigned int get_core_count(void)
 {
-	unsigned int ncores;
 	void __iomem *scu_base = scu_base_addr();
-
-	if (scu_base) {
-		ncores = __raw_readl(scu_base + SCU_CONFIG);
-		ncores = (ncores & 0x03) + 1;
-	} else
-		ncores = 1;
-
-	return ncores;
-}
-
-/*
- * Setup the SCU
- */
-static void scu_enable(void)
-{
-	u32 scu_ctrl;
-	void __iomem *scu_base = scu_base_addr();
-
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
-	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+	if (scu_base)
+		return scu_get_core_count(scu_base);
+	return 1;
 }
 
 static DEFINE_SPINLOCK(boot_lock);
@@ -184,7 +170,7 @@ void __init smp_init_cpus(void)
 	unsigned int i, ncores = get_core_count();
 
 	for (i = 0; i < ncores; i++)
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -217,19 +203,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-	/*
-	 * Enable the local timer or broadcast device for the boot CPU.
-	 */
-	local_timer_setup();
-#endif
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
 	 */
 	for (i = 0; i < max_cpus; i++)
-		cpu_set(i, cpu_present_map);
+		set_cpu_present(i, true);
 
 	/*
 	 * Initialise the SCU if there are more than one CPU and let
@@ -239,7 +218,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	 * WFI
 	 */
 	if (max_cpus > 1) {
-		scu_enable();
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
 		poke_milo();
 	}
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c20fbef122b..8dfa44e08a9 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a64b84a7a3d..25efe71a67c 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -203,11 +203,23 @@ static struct amba_device *amba_devs[] __initdata = {
 /*
  * RealView PB1176 platform devices
  */
-static struct resource realview_pb1176_flash_resource = {
-	.start			= REALVIEW_PB1176_FLASH_BASE,
-	.end			= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
+static struct resource realview_pb1176_flash_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB1176_FLASH_BASE,
+		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
+		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
 };
+#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
+#define PB1176_FLASH_BLOCKS	2
+#else
+#define PB1176_FLASH_BLOCKS	1
+#endif
 
 static struct resource realview_pb1176_smsc911x_resources[] = {
 	[0] = {
@@ -271,7 +283,8 @@ static void __init realview_pb1176_init(void)
 	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
 #endif
 
-	realview_flash_register(&realview_pb1176_flash_resource, 1);
+	realview_flash_register(realview_pb1176_flash_resources,
+				PB1176_FLASH_BLOCKS);
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ea1e60eca35..dc4b1694390 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -32,6 +32,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
new file mode 100644
index 00000000000..1fe294d0bf9
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -0,0 +1,335 @@
+/*
+ *  arch/arm/mach-realview/realview_pbx.c
+ *
+ *  Copyright (C) 2009 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pbx.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+
+static struct map_desc realview_pbx_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_PCI
+	{
+		.virtual	= PCIX_UNIT_BASE,
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
+		.length		= REALVIEW_PBX_PCI_BASE_SIZE,
+		.type		= MT_DEVICE,
+	},
+#endif
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+};
+
+static struct map_desc realview_local_io_desc[] __initdata = {
+	{
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+		.length         = SZ_4K,
+		.type           = MT_DEVICE,
+	}, {
+		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
+		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
+		.length         = SZ_8K,
+		.type           = MT_DEVICE,
+	}
+};
+
+static void __init realview_pbx_map_io(void)
+{
+	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
+}
+
+/*
+ * RealView PBXCore AMBA devices
+ */
+
+#define GPIO2_IRQ		{ IRQ_PBX_GPIO2, NO_IRQ }
+#define GPIO2_DMA		{ 0, 0 }
+#define GPIO3_IRQ		{ IRQ_PBX_GPIO3, NO_IRQ }
+#define GPIO3_DMA		{ 0, 0 }
+#define AACI_IRQ		{ IRQ_PBX_AACI, NO_IRQ }
+#define AACI_DMA		{ 0x80, 0x81 }
+#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
+#define MMCI0_DMA		{ 0x84, 0 }
+#define KMI0_IRQ		{ IRQ_PBX_KMI0, NO_IRQ }
+#define KMI0_DMA		{ 0, 0 }
+#define KMI1_IRQ		{ IRQ_PBX_KMI1, NO_IRQ }
+#define KMI1_DMA		{ 0, 0 }
+#define PBX_SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define PBX_SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA		{ 0, 0 }
+#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD, NO_IRQ }
+#define PBX_CLCD_DMA		{ 0, 0 }
+#define DMAC_IRQ		{ IRQ_PBX_DMAC, NO_IRQ }
+#define DMAC_DMA		{ 0, 0 }
+#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA		{ 0, 0 }
+#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG, NO_IRQ }
+#define PBX_WATCHDOG_DMA	{ 0, 0 }
+#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0, NO_IRQ }
+#define PBX_GPIO0_DMA		{ 0, 0 }
+#define GPIO1_IRQ		{ IRQ_PBX_GPIO1, NO_IRQ }
+#define GPIO1_DMA		{ 0, 0 }
+#define PBX_RTC_IRQ		{ IRQ_PBX_RTC, NO_IRQ }
+#define PBX_RTC_DMA		{ 0, 0 }
+#define SCI_IRQ			{ IRQ_PBX_SCI, NO_IRQ }
+#define SCI_DMA			{ 7, 6 }
+#define PBX_UART0_IRQ		{ IRQ_PBX_UART0, NO_IRQ }
+#define PBX_UART0_DMA		{ 15, 14 }
+#define PBX_UART1_IRQ		{ IRQ_PBX_UART1, NO_IRQ }
+#define PBX_UART1_DMA		{ 13, 12 }
+#define PBX_UART2_IRQ		{ IRQ_PBX_UART2, NO_IRQ }
+#define PBX_UART2_DMA		{ 11, 10 }
+#define PBX_UART3_IRQ		{ IRQ_PBX_UART3, NO_IRQ }
+#define PBX_UART3_DMA		{ 0x86, 0x87 }
+#define PBX_SSP_IRQ		{ IRQ_PBX_SSP, NO_IRQ }
+#define PBX_SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+/*
+ * RealView PB-X platform devices
+ */
+static struct resource realview_pbx_flash_resources[] = {
+	[0] = {
+		.start          = REALVIEW_PBX_FLASH0_BASE,
+		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = REALVIEW_PBX_FLASH1_BASE,
+		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct resource realview_pbx_smsc911x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_ETH_BASE,
+		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_ETH,
+		.end		= IRQ_PBX_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource realview_pbx_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBX_USB_BASE,
+		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBX_USB,
+		.end		= IRQ_PBX_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static void __init gic_init_irq(void)
+{
+	/* ARM PBX on-board GIC */
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+			      29);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
+	} else {
+		gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
+			      IRQ_PBX_GIC_START);
+		gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
+	}
+}
+
+static void __init realview_pbx_timer_init(void)
+{
+	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+
+#ifdef CONFIG_LOCAL_TIMERS
+	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+		twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
+#endif
+	realview_timer_init(IRQ_PBX_TIMER0_1);
+}
+
+static struct sys_timer realview_pbx_timer = {
+	.init		= realview_pbx_timer_init,
+};
+
+static void __init realview_pbx_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	if (core_tile_pbxa9mp()) {
+		void __iomem *l2x0_base =
+			__io_address(REALVIEW_PBX_TILE_L220_BASE);
+
+		/* set RAM latencies to 1 cycle for eASIC */
+		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+		/* 16KB way size, 8-way associativity, parity disabled
+		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
+		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+	}
+#endif
+
+	realview_flash_register(realview_pbx_flash_resources,
+				ARRAY_SIZE(realview_pbx_flash_resources));
+	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
+	platform_device_register(&realview_i2c_device);
+	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pbx_isp1761_resources);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= realview_pbx_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_pbx_timer,
+	.init_machine	= realview_pbx_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 7a7ed4174c8..6c68e78f359 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -33,10 +33,10 @@
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
-		return -1;  /* not valid interrupts */
+	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
+		return -EINVAL;  /* not valid interrupts */
 
-	return (pin - S3C2410_GPE0) + IRQ_EINT0;
+	return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
 }
 
 EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63a30d1dd42..41bb65d5b91 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -59,6 +59,7 @@ config ARCH_H1940
 	bool "IPAQ H1940"
 	select CPU_S3C2410
 	select PM_H1940 if PM
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -70,6 +71,7 @@ config PM_H1940
 config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -82,6 +84,7 @@ config ARCH_BAST
 	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select ISA
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -89,6 +92,7 @@ config ARCH_BAST
 config MACH_OTOM
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -96,6 +100,7 @@ config MACH_AML_M5900
 	bool "AML M5900 Series"
 	select CPU_S3C2410
 	select PM_SIMTEC if PM
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the American Microsystems M5900 Series
            <http://www.amltd.com>
@@ -111,6 +116,7 @@ config BAST_PC104_IRQ
 config MACH_TCT_HAMMER
 	bool "TCT Hammer Board"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the TinCanTools Hammer Board
            <http://www.tincantools.com>
@@ -122,12 +128,14 @@ config MACH_VR1000
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
 config MACH_QT2410
 	bool "QT2410"
 	select CPU_S3C2410
+	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 440c014e24b..dbf96e60d99 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -17,14 +17,16 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 36a3132f39e..7974afca297 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 	unsigned long flags;
 	unsigned long val;
 
-	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
-		return -1;
+	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
+		return -EINVAL;
 
 	config &= 0xff;
 
-	pin -= S3C2410_GPG8;
+	pin -= S3C2410_GPG(8);
 	reg += pin & ~3;
 
 	local_irq_save(flags);
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5a6bc56f186..5aabf117cbb 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
@@ -41,9 +43,9 @@ static void h1940bt_enable(int on)
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 
 		state = 1;
 	}
@@ -52,9 +54,9 @@ static void h1940bt_enable(int on)
 		led_trigger_event(bt_led_trigger, 0);
 #endif
 
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
 
@@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
-	s3c2410_gpio_pullup(S3C2410_GPH0, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
-	s3c2410_gpio_pullup(S3C2410_GPH1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH2, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
 #ifdef CONFIG_LEDS_H1940
 	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 13358ce2128..c3a2629e0de 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -3,7 +3,7 @@
  * Copyright (C) 2003,2004,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C241XX DMA support
+ * Samsung S3C24XX DMA support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,8 +13,8 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
+#include <plat/dma.h>
 #include <linux/sysdev.h>
-#include <mach/hardware.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
@@ -55,9 +55,9 @@ enum dma_ch {
 
 /* we have 4 dma channels */
 #ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS		(4)
+#define S3C_DMA_CHANNELS		(4)
 #else
-#define S3C2410_DMA_CHANNELS		(6)
+#define S3C_DMA_CHANNELS		(6)
 #endif
 
 /* types */
@@ -68,7 +68,6 @@ enum s3c2410_dma_state {
 	S3C2410_DMA_PAUSED
 };
 
-
 /* enum s3c2410_dma_loadst
  *
  * This represents the state of the DMA engine, wrt to the loaded / running
@@ -104,32 +103,6 @@ enum s3c2410_dma_loadst {
 	S3C2410_DMALOAD_1LOADED_1RUNNING,
 };
 
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
 
 /* flags */
 
@@ -139,17 +112,14 @@ enum s3c2410_chan_op {
 
 /* dma buffer */
 
-struct s3c2410_dma_client {
-	char                *name;
-};
+struct s3c2410_dma_buf;
 
-/* s3c2410_dma_buf_s
+/* s3c2410_dma_buf
  *
  * internally used buffer structure to describe a queued or running
  * buffer.
 */
 
-struct s3c2410_dma_buf;
 struct s3c2410_dma_buf {
 	struct s3c2410_dma_buf	*next;
 	int			 magic;		/* magic */
@@ -161,20 +131,6 @@ struct s3c2410_dma_buf {
 
 /* [1] is this updated for both recv/send modes? */
 
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
 struct s3c2410_dma_stats {
 	unsigned long		loads;
 	unsigned long		timeout_longest;
@@ -206,10 +162,10 @@ struct s3c2410_dma_chan {
 
 	/* channel configuration */
 	enum s3c2410_dmasrc	 source;
+	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
 	unsigned int		 flags;		/* channel flags */
-	unsigned int		 hw_cfg;	/* last hw config */
 
 	struct s3c24xx_dma_map	*map;		/* channel hw maps */
 
@@ -236,213 +192,6 @@ struct s3c2410_dma_chan {
 	struct sys_device	dev;
 };
 
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
 typedef unsigned long dma_device_t;
 
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(unsigned int channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(unsigned int channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(unsigned int channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 6c9fbb99ef1..8fe192081d3 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
 {
 	struct s3c_gpio_chip *chip;
 
-	if (pin > S3C2410_GPG10)
+	if (pin > S3C2410_GPG(10))
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
new file mode 100644
index 00000000000..801dff13858
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -0,0 +1,103 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+*/
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index ce1ec69806a..2edbb9c88ab 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -11,6 +11,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __MACH_GPIONRS_H
+#define __MACH_GPIONRS_H
+
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
 #define S3C2410_GPIO_BANKA   (32*0)
@@ -21,3 +24,70 @@
 #define S3C2410_GPIO_BANKF   (32*5)
 #define S3C2410_GPIO_BANKG   (32*6)
 #define S3C2410_GPIO_BANKH   (32*7)
+
+/* GPIO bank sizes */
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0	S3C2410_GPA(0)
+#define S3C2410_GPA1	S3C2410_GPA(1)
+#define S3C2410_GPA3	S3C2410_GPA(3)
+#define S3C2410_GPA7	S3C2410_GPA(7)
+
+#define S3C2410_GPE0	S3C2410_GPE(0)
+#define S3C2410_GPE1	S3C2410_GPE(1)
+#define S3C2410_GPE2	S3C2410_GPE(2)
+#define S3C2410_GPE3	S3C2410_GPE(3)
+#define S3C2410_GPE4	S3C2410_GPE(4)
+#define S3C2410_GPE5	S3C2410_GPE(5)
+#define S3C2410_GPE6	S3C2410_GPE(6)
+#define S3C2410_GPE7	S3C2410_GPE(7)
+#define S3C2410_GPE8	S3C2410_GPE(8)
+#define S3C2410_GPE9	S3C2410_GPE(9)
+#define S3C2410_GPE10	S3C2410_GPE(10)
+
+#define S3C2410_GPH10	S3C2410_GPH(10)
+
+#endif /* __MACH_GPIONRS_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 51a88cf9526..15f0b3e7ce6 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -24,5 +24,6 @@
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
 
 #define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index 74d5a1a4024..aef5631eac5 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -15,101 +15,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
 extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 255fdfeaf95..e99b212cb1c 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -84,7 +84,6 @@
 
 #define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
 #define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
 #define S3C24XX_PA_DMA      S3C2410_PA_DMA
 #define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
 #define S3C24XX_PA_LCD      S3C2410_PA_LCD
@@ -102,6 +101,7 @@
 
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
+#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 35a03df473f..b278d0c45cc 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -69,104 +69,58 @@
 #define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
 
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
 #define S3C2410_GPA0_ADDR0   (1<<0)
 
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
 #define S3C2410_GPA1_ADDR16  (1<<1)
 
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
 #define S3C2410_GPA2_ADDR17  (1<<2)
 
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
 #define S3C2410_GPA3_ADDR18  (1<<3)
 
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
 #define S3C2410_GPA4_ADDR19  (1<<4)
 
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
 #define S3C2410_GPA5_ADDR20  (1<<5)
 
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
 #define S3C2410_GPA6_ADDR21  (1<<6)
 
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
 #define S3C2410_GPA7_ADDR22  (1<<7)
 
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
 #define S3C2410_GPA8_ADDR23  (1<<8)
 
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
 #define S3C2410_GPA9_ADDR24  (1<<9)
 
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
 #define S3C2410_GPA10_ADDR25 (1<<10)
 #define S3C2400_GPA10_SCKE   (1<<10)
 
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
 #define S3C2410_GPA11_ADDR26 (1<<11)
 #define S3C2400_GPA11_nCAS0  (1<<11)
 
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
 #define S3C2410_GPA12_nGCS1  (1<<12)
 #define S3C2400_GPA12_nCAS1  (1<<12)
 
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
 #define S3C2410_GPA13_nGCS2  (1<<13)
 #define S3C2400_GPA13_nGCS1  (1<<13)
 
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
 #define S3C2410_GPA14_nGCS3  (1<<14)
 #define S3C2400_GPA14_nGCS2  (1<<14)
 
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
 #define S3C2410_GPA15_nGCS4  (1<<15)
 #define S3C2400_GPA15_nGCS3  (1<<15)
 
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
 #define S3C2410_GPA16_nGCS5  (1<<16)
 #define S3C2400_GPA16_nGCS4  (1<<16)
 
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
 #define S3C2410_GPA17_CLE    (1<<17)
 #define S3C2400_GPA17_nGCS5  (1<<17)
 
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
 #define S3C2410_GPA18_ALE    (1<<18)
 
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
 #define S3C2410_GPA19_nFWE   (1<<19)
 
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
 #define S3C2410_GPA20_nFRE   (1<<20)
 
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
 #define S3C2410_GPA21_nRSTOUT (1<<21)
 
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
 #define S3C2410_GPA22_nFCE   (1<<22)
 
 /* 0x08 and 0x0c are reserved on S3C2410 */
@@ -194,107 +148,69 @@
 
 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 #define S3C2400_GPB0_DATA16  (0x02 << 0)
 
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 #define S3C2400_GPB1_DATA17  (0x02 << 2)
 
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 #define S3C2400_GPB2_DATA18  (0x02 << 4)
 #define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 #define S3C2400_GPB3_DATA19  (0x02 << 6)
 #define S3C2400_GPB3_TXD1    (0x03 << 6)
 
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 #define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
 #define S3C2400_GPB4_RXD1    (0x03 << 8)
 #define S3C2400_GPB4_MASK    (0x03 << 8)
 
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 #define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 #define S3C2400_GPB8_DATA24  (0x02 << 16)
 
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 #define S3C2400_GPB10_nSS    (0x03 << 20)
 
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
 #define S3C2400_GPB11_INP    (0x00 << 22)
 #define S3C2400_GPB11_OUTP   (0x01 << 22)
 #define S3C2400_GPB11_DATA27 (0x02 << 22)
 
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
 #define S3C2400_GPB12_INP    (0x00 << 24)
 #define S3C2400_GPB12_OUTP   (0x01 << 24)
 #define S3C2400_GPB12_DATA28 (0x02 << 24)
 
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
 #define S3C2400_GPB13_INP    (0x00 << 26)
 #define S3C2400_GPB13_OUTP   (0x01 << 26)
 #define S3C2400_GPB13_DATA29 (0x02 << 26)
 
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
 #define S3C2400_GPB14_INP    (0x00 << 28)
 #define S3C2400_GPB14_OUTP   (0x01 << 28)
 #define S3C2400_GPB14_DATA30 (0x02 << 28)
 
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
 #define S3C2400_GPB15_INP    (0x00 << 30)
 #define S3C2400_GPB15_OUTP   (0x01 << 30)
 #define S3C2400_GPB15_DATA31 (0x02 << 30)
@@ -315,99 +231,51 @@
 #define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
 #define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
 
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
 #define S3C2400_GPC0_VD0 	(0x02 << 0)
 
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
 #define S3C2400_GPC1_VD1 	(0x02 << 2)
 
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
 #define S3C2400_GPC2_VD2  	(0x02 << 4)
 
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
 #define S3C2400_GPC3_VD3   	(0x02 << 6)
 
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
 #define S3C2410_GPC4_VM		(0x02 << 8)
 #define S3C2400_GPC4_VD4	(0x02 << 8)
 
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
 #define S3C2400_GPC5_VD5   	(0x02 << 10)
 
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
 #define S3C2400_GPC6_VD6   	(0x02 << 12)
 
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
 #define S3C2400_GPC7_VD7   	(0x02 << 14)
 
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
 #define S3C2400_GPC8_VD8	(0x02 << 16)
 
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
 #define S3C2400_GPC9_VD9	(0x02 << 18)
 
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
 #define S3C2400_GPC10_VD10	(0x02 << 20)
 
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
 #define S3C2400_GPC11_VD11	(0x02 << 22)
 
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
 #define S3C2400_GPC12_VD12	(0x02 << 24)
 
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
 #define S3C2400_GPC13_VD13	(0x02 << 26)
 
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
 #define S3C2400_GPC14_VD14	(0x02 << 28)
 
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
 #define S3C2400_GPC15_VD15	(0x02 << 30)
 
@@ -432,99 +300,51 @@
 #define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
 
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
 #define S3C2400_GPD0_VFRAME	(0x02 << 0)
 #define S3C2442_GPD0_nSPICS1	(0x03 << 0)
 
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
 #define S3C2400_GPD1_VM		(0x02 << 2)
 #define S3C2442_GPD1_SPICLK1	(0x03 << 2)
 
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
 #define S3C2400_GPD2_VLINE	(0x02 << 4)
 
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
 #define S3C2400_GPD3_VCLK	(0x02 << 6)
 
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
 #define S3C2400_GPD4_LEND	(0x02 << 8)
 
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
 #define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
 #define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
 #define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
 
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
 #define S3C2410_GPD9_MASK       (0x03 << 18)
 
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
 
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
 #define S3C2410_GPD12_VD20	(0x02 << 24)
 
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
 #define S3C2410_GPD13_VD21	(0x02 << 26)
 
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
 #define S3C2410_GPD14_VD22	(0x02 << 28)
 #define S3C2410_GPD14_nSS1	(0x03 << 28)
 
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
 #define S3C2410_GPD15_nSS0	(0x03 << 30)
 
@@ -550,34 +370,22 @@
 #define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
 #define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
 
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 #define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
@@ -585,9 +393,6 @@
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
@@ -595,81 +400,48 @@
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 #define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 #define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 #define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 #define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
 #define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 #define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
 #define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 #define S3C2410_GPE14_MASK     (0x03 << 28)
 
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
 #define S3C2410_GPE15_MASK     (0x03 << 30)
 
@@ -705,55 +477,31 @@
 #define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
 #define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
 
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 #define S3C2400_GPF0_RXD0   (0x02 << 0)
 
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 #define S3C2400_GPF1_RXD1   (0x02 << 2)
 #define S3C2400_GPF1_IICSDA (0x03 << 2)
 
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 #define S3C2400_GPF2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 #define S3C2400_GPF3_TXD1   (0x02 << 6)
 #define S3C2400_GPF3_IICSCL (0x03 << 6)
 
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 #define S3C2400_GPF4_nRTS0  (0x02 << 8)
 #define S3C2400_GPF4_nXBACK (0x03 << 8)
 
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 #define S3C2400_GPF5_nCTS0  (0x02 << 10)
 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
 
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
 
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 
 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
@@ -778,117 +526,69 @@
 #define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
 #define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
 
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 #define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 #define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 #define S3C2410_GPG2_nSS0     (0x03 << 4)
 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 #define S3C2410_GPG3_nSS1     (0x03 << 6)
 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 #define S3C2400_GPG6_MMCDAT   (0x02 << 12)
 #define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 #define S3C2400_GPG7_SPIMISO  (0x02 << 14)
 #define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 #define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
 #define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 #define S3C2400_GPG9_SPICLK   (0x02 << 18)
 #define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 #define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
 #define S3C2443_GPG12_nINPACK (0x03 << 24)
 
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 #define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
 #define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
 #define S3C2443_GPG15_CF_PWR  (0x03 << 30)
@@ -907,62 +607,29 @@
 #define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
 
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index b8687f71c30..6faadcee772 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -11,21 +11,13 @@
 */
 
 #include <mach/hardware.h>
-#include <linux/io.h>
-
-#include <plat/regs-watchdog.h>
-#include <mach/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
+#include <plat/watchdog-reset.h>
 
 extern void (*s3c24xx_reset_hook)(void);
 
 static void
 arch_reset(char mode, const char *cmd)
 {
-	struct clk *wdtclk;
-
 	if (mode == 's') {
 		cpu_reset(0);
 	}
@@ -33,31 +25,7 @@ arch_reset(char mode, const char *cmd)
 	if (s3c24xx_reset_hook)
 		s3c24xx_reset_hook();
 
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
+	arch_wdt_reset();
 
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 6d6995afeb4..06a84adfb13 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
@@ -224,8 +225,8 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
-		s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
 	}
 }
 static void __init amlm5900_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 8637dea5e15..ce3baba2cd7 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
@@ -591,8 +592,6 @@ static void __init bast_map_io(void)
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-
-	usb_simtec_init();
 }
 
 static void __init bast_init(void)
@@ -607,6 +606,7 @@ static void __init bast_init(void)
 	i2c_register_board_info(0, bast_i2c_devs,
 				ARRAY_SIZE(bast_i2c_devs));
 
+	usb_simtec_init();
 	nor_simtec_init();
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7a7c4da4c25..d9cd5ddecf4 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 	.udc_command		= h1940_udc_pullup,
-	.vbus_pin		= S3C2410_GPG5,
+	.vbus_pin		= S3C2410_GPG(5),
 	.vbus_pin_inverted	= 1,
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 2b83f870771..0f6ed61af41 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -19,6 +19,7 @@
 
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
 	.udc_command		= n30_udc_pullup,
-	.vbus_pin		= S3C2410_GPG1,
+	.vbus_pin		= S3C2410_GPG(1),
 	.vbus_pin_inverted	= 0,
 };
 
 static struct gpio_keys_button n30_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Thumbwheel Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Thumbwheel Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Thumbwheel Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
@@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
 
 static struct gpio_keys_button n35_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Joystick Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG6,
+		.gpio		= S3C2410_GPG(6),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Left",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG5,
+		.gpio		= S3C2410_GPG(5),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Right",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Joystick Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF3,
+		.gpio		= S3C2410_GPF(3),
 		.code		= SW_RADIO,
 		.desc		= "GPS Antenna",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG2,
+		.gpio		= S3C2410_GPG(2),
 		.code		= SW_HEADPHONE_INSERT,
 		.desc		= "Headphone",
 		.active_low	= 0,
@@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
 /* This is the bluetooth LED on the device. */
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG6,
+	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
@@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
 	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD9,
+	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9f1ba9b63f7..2cc9849eb44 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
@@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
 /* LED */
 
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
@@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
 {
 	switch (cs) {
 	case BITBANG_CS_ACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
 		break;
 	case BITBANG_CS_INACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
 		break;
 	}
 }
 
 static struct s3c2410_spigpio_info spi_gpio_cfg = {
-	.pin_clk	= S3C2410_GPG7,
-	.pin_mosi	= S3C2410_GPG6,
-	.pin_miso	= S3C2410_GPG5,
+	.pin_clk	= S3C2410_GPG(7),
+	.pin_mosi	= S3C2410_GPG(6),
+	.pin_miso	= S3C2410_GPG(5),
 	.chip_select	= &spi_gpio_cs,
 };
 
@@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void)
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 61a1ea9c5c5..1628cc773a2 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
@@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
 
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB1,
+	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB2,
+	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
 }
 
 static void __init vr1000_map_io(void)
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 87fc481d92d..143e08a599d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/sysdev.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void)
 	}
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 
 }
 
@@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
 	__raw_writel(tmp, S3C2410_GSTATUS2);
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 8331e8d97e2..6cd9377ddb8 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -18,9 +18,11 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/gpio.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -29,7 +31,6 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
 	power_state[port] = to;
 
 	if (power_state[0] && power_state[1])
-		s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+		gpio_set_value(S3C2410_GPB(4), 0);
 	else
-		s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+		gpio_set_value(S3C2410_GPB(4), 1);
 }
 
 static irqreturn_t
@@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
 {
 	struct s3c2410_hcd_info *info = pw;
 
-	if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
 		s3c2410_usb_report_oc(info, 3);
 	} else {
@@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
 
 int usb_simtec_init(void)
 {
+	int ret;
+
 	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+	ret = gpio_request(S3C2410_GPB(4), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPB4\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPG10\n", __func__);
+		gpio_free(S3C2410_GPB(4));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C2410_GPB(4), 1);
+	gpio_direction_input(S3C2410_GPG(10));
+
+	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index ca99564ae4b..63586ffd0ae 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -38,6 +38,7 @@ menu "S3C2412 Machines"
 config MACH_JIVE
 	bool "Logitech Jive"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -50,6 +51,7 @@ config MACH_SMDK2413
 	select CPU_S3C2412
 	select MACH_S3C2413
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -72,6 +74,7 @@ config MACH_SMDK2412
 config MACH_VSTMS
 	bool "VMSTMS"
 	select CPU_S3C2412
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 9e3478506c6..f8d16fc10bc 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,12 +20,13 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8f0d37d43b4..8df506eac90 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
 {
 	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, set);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 }
 
 #undef LCD_UPPER_MARGIN
@@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
 
 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
-	.pin_clk	= S3C2410_GPG8,
-	.pin_mosi	= S3C2410_GPB8,
+	.pin_clk	= S3C2410_GPG(8),
+	.pin_mosi	= S3C2410_GPB(8),
 	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
@@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
 
 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
-	.pin_clk	= S3C2410_GPB4,
-	.pin_mosi	= S3C2410_GPB9,
+	.pin_clk	= S3C2410_GPB(4),
+	.pin_mosi	= S3C2410_GPB(9),
 	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
@@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG1,		/* detect is on GPG1 */
+	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
 };
 
 /* Jive power management device */
@@ -529,8 +530,8 @@ static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
 
-	s3c2410_gpio_setpin(S3C2410_GPC5, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 }
 
 static void __init jive_machine_init(void)
@@ -634,22 +635,22 @@ static void __init jive_machine_init(void)
 
 	/* initialise the spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB7, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB6, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPG8, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 
 	/* initialise the WM8750 spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPH10, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index eba66aa6bd2..9a5e4341972 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cde5ae9a434..5df73cbf2b4 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -43,6 +44,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -58,12 +60,14 @@ config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
 	select MACH_SMDK
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2440.
 
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -76,6 +80,7 @@ config SMDK2440_CPU2440
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 69b6cf34df4..e08e081430f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -17,14 +17,16 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
+#include <mach/map.h>
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 9c6abf9fb54..68f3870991b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
@@ -468,7 +469,7 @@ static void __init anubis_map_io(void)
 		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 	} else {
 		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 315c42e3127..dfc7010935d 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
 };
 
 static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
-	.gpio_detect	= S3C2410_GPG10,
+	.gpio_detect	= S3C2410_GPG(10),
 };
 
 /* 7" LCD panel */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 7aeaa972d7f..d43edede590 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c8a46685ce3..cba064b49a6 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
@@ -384,7 +385,7 @@ static void __init osiris_map_io(void)
 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 	} else {
 		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 8430e582918..397f3b5c0b4 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,12 +20,13 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 6da82b5c09b..f5af212066c 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -5,4 +5,27 @@
 #
 # Licensed under GPLv2
 
-# Currently nothing here, this will be added later
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	select CPU_S3C6400_INIT
+	select CPU_S3C6400_CLOCK
+	help
+	  Enable S3C6400 CPU support
+
+config S3C6400_SETUP_SDHCI
+	bool
+	help
+	  Internal configuration for default SDHCI
+	  setup for S3C6400.
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C6400_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
index 8f397db25b8..df1ce4aa03e 100644
--- a/arch/arm/mach-s3c6400/Makefile
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -12,4 +12,12 @@ obj-				:=
 
 # Core support for S3C6400 system
 
-obj-n				+= blank.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+
+# setup support
+
+obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 9771ac2cb07..1067619f0ba 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -11,6 +11,63 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-/* currently nothing here, placeholder */
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ int s3c_dma_has_circular(void)
+{
+	/* we will be supporting ciruclar buffers as soon as we have DMA
+	 * engine support.
+	 */
+	return 1;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 8199972ed5b..5057d9948d3 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -39,6 +39,8 @@
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
 #define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
@@ -57,6 +59,8 @@
 #define S3C64XX_PA_MODEM	(0x74108000)
 #define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
 
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -69,5 +73,7 @@
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
 #define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
new file mode 100644
index 00000000000..a6c7f4eb3a1
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - clock register compatibility with s3c24xx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-clock.h>
+
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 090cfd969bc..2e58cb7a714 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <plat/watchdog-reset.h>
+
 static void arch_idle(void)
 {
 	/* nothing here yet */
@@ -18,7 +20,11 @@ static void arch_idle(void)
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	if (mode != 's')
+		arch_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	cpu_reset(0);
 }
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c
new file mode 100644
index 00000000000..ab19285389a
--- /dev/null
+++ b/arch/arm/mach-s3c6400/mach-smdk6400.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1A), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6400_init_irq,
+	.map_io		= smdk6400_map_io,
+	.init_machine	= smdk6400_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
new file mode 100644
index 00000000000..1ece887d90b
--- /dev/null
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -0,0 +1,89 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+	/* setup SDHCI */
+
+	s3c6400_default_sdhci0();
+	s3c6400_default_sdhci1();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s3c64xx_register_clocks();
+	s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+	/* VIC0 does not have IRQS 5..7,
+	 * VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+	.name	= "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+	.cls	= &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+	return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+	printk("S3C6400: Initialising architecture\n");
+
+	return sysdev_register(&s3c6400_sysdev);
+}
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
new file mode 100644
index 00000000000..b93dafbee1f
--- /dev/null
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6400_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 1d501007002..e63aac7f4e5 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -16,9 +16,18 @@ config CPU_S3C6410
 
 config S3C6410_SETUP_SDHCI
 	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
 	help
 	  Internal helper functions for S3C6410 based SDHCI systems
 
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
@@ -26,6 +35,8 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
 	select S3C6410_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
@@ -60,3 +71,29 @@ config SMDK6410_SD_CH1
 	  channels 0 and 1 are the same.
 
 endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 2cd4f189036..6f9deac8861 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -20,4 +20,8 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 
 # machine support
 
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+
+
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 6a73ca6b7a3..ade904de889 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -31,6 +31,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -68,7 +69,7 @@ void __init s3c6410_init_clocks(int xtal)
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
 	s3c24xx_register_baseclocks(xtal);
 	s3c64xx_register_clocks();
-	s3c6400_register_clocks();
+	s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
 	s3c6400_setup_clocks();
 }
 
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c
new file mode 100644
index 00000000000..661cca63de2
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-anw6410.c
@@ -0,0 +1,245 @@
+/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000	(0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV	(0x30000000)
+
+#define ANW6410_EN_DM9000	(1<<11)
+#define ANW6410_EN_LCD		(1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 1);
+		gpio_direction_output(S3C64XX_GPF(4), 1);
+	} else {
+		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 0);
+		gpio_direction_output(S3C64XX_GPF(4), 0);
+	}
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+	.set_power	= anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &anw6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+	[0] = {
+		.start = ANW6410_PA_DM9000,
+		.end   = ANW6410_PA_DM9000 + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = ANW6410_PA_DM9000 + 4,
+		.end   = ANW6410_PA_DM9000 + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = IRQ_EINT(15),
+		.end   = IRQ_EINT(15),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	/* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+	.name	= "dm9000",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
+	.resource	= anw6410_dm9000_resource,
+	.dev	= {
+		.platform_data  = &anw6410_dm9000_pdata,
+	},
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
+		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+	&s3c_device_fb,
+	&anw6410_lcd_powerdev,
+	&anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+	anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+	s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+	gpio_request(S3C64XX_GPF(1), "panel power");
+	gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+	anw6410_dm9000_enable();
+
+	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= anw6410_map_io,
+	.init_machine	= anw6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
new file mode 100644
index 00000000000..6030636f854
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+struct map_desc ncp_iodesc[] = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 7f473e47e4f..bc9a7dea567 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -24,6 +24,12 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/smsc911x.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
 
 #include <video/platform_lcd.h>
 
@@ -39,8 +45,12 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/regs-modem.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-sys.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
+#include <plat/gpio-cfg.h>
 
 #include <plat/s3c6410.h>
 #include <plat/clock.h>
@@ -129,6 +139,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+static struct resource smdk6410_smsc911x_resources[] = {
+	[0] = {
+		.start = 0x18000000,
+		.end   = 0x18000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = S3C_EINT(10),
+		.end   = S3C_EINT(10),
+		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+	.name          = "smsc911x",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+	.resource      = &smdk6410_smsc911x_resources[0],
+	.dev = {
+		.platform_data = &smdk6410_smsc911x_pdata,
+	},
+};
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -141,12 +182,155 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
+	&s3c_device_usb,
+	&s3c_device_usb_hsotg,
 	&smdk6410_lcd_powerdev,
+
+	&smdk6410_smsc911x,
+};
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT/PVDD_PLL",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+	.constraints = {
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_init_data wm8350_dcdc4_data = {
+	.constraints = {
+		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
+static struct regulator_init_data wm8350_dcdc6_data = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+	.consumer_supplies = dcdc6_consumers,
 };
 
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.always_on = 1,
+	},
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+	.constraints = {
+		.name = "PVDD_OTGI/HPVDD/AVDD",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.always_on = 1,
+	},
+};
+
+static struct {
+	int regulator;
+	struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
+	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
+	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
+	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
+	{ WM8350_LDO_1, &wm8350_ldo1_data },
+	{ WM8350_LDO_2, &wm8350_ldo2_data },
+	{ WM8350_LDO_3, &wm8350_ldo3_data },
+	{ WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	/* Instantiate the regulators */
+	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+		wm8350_register_regulator(wm8350,
+					  wm1190_regulators[i].regulator,
+					  wm1190_regulators[i].initdata);
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+	.init = smdk6410_wm8350_init,
+	.irq_high = 1,
+};
+#endif
+
 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+	{ I2C_BOARD_INFO("wm8350", 0x1a),
+	  .platform_data = &smdk6410_wm8350_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
 };
 
 static struct i2c_board_info i2c_devs1[] __initdata = {
@@ -155,9 +339,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 
 static void __init smdk6410_map_io(void)
 {
+	u32 tmp;
+
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+	/* set the LCD type */
+
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the lcd bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
 }
 
 static void __init smdk6410_machine_init(void)
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 0b5788bd598..20666f3bd47 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -21,8 +21,6 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
 #include <plat/sdhci.h>
 
@@ -35,22 +33,6 @@ char *s3c6410_hsmmc_clksrcs[4] = {
 	/* [3] = "48m", - note not succesfully used yet */
 };
 
-void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPG(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
 
 void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 				    void __iomem *r,
@@ -84,19 +66,3 @@ void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
 }
 
-void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
deleted file mode 100644
index 444f266ecc0..00000000000
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Based on spitz_pm.c and sharp code.
- *
- * Copyright (C) 2001  SHARP
- * Copyright 2005 Pavel Machek <pavel@suse.cz>
- *
- * Distribute under GPLv2.
- *
- * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
- * and sometimes charges them when it should not. If it makes angry lithium to come your way...
- * ...well, you have been warned.
- *
- * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
- * and my collie did not explode (yet).
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
-#include <mach/dma.h>
-#include <mach/collie.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-#include "../drivers/mfd/ucb1x00.h"
-
-static struct ucb1x00 *ucb;
-static int ad_revise;
-
-#define ADCtoPower(x)	       ((330 * x * 2) / 1024)
-
-static void collie_charger_init(void)
-{
-	int err;
-
-	if (sharpsl_param.adadj != -1)
-		ad_revise = sharpsl_param.adadj;
-
-	/* Register interrupt handler. */
-	if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
-			       "ACIN", sharpsl_ac_isr))) {
-		printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN);
-		return;
-	}
-	if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED,
-			       "CO", sharpsl_chrg_full_isr))) {
-		free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr);
-		printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO);
-		return;
-	}
-
-	gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
-	gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
-
-	ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
-			           COLLIE_TC35143_GPIO_BBAT_ON);
-	return;
-}
-
-static void collie_measure_temp(int on)
-{
-	if (on)
-		ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	else
-		ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-}
-
-static void collie_charge(int on)
-{
-	/* Zaurus seems to contain LTC1731; it should know when to
-	 * stop charging itself, so setting charge on should be
-	 * relatively harmless (as long as it is not done too often).
-	 */
-	gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
-}
-
-static void collie_discharge(int on)
-{
-}
-
-static void collie_discharge1(int on)
-{
-}
-
-static void collie_presuspend(void)
-{
-}
-
-static void collie_postsuspend(void)
-{
-}
-
-static int collie_should_wakeup(unsigned int resume_on_alarm)
-{
-	return 0;
-}
-
-static unsigned long collie_charger_wakeup(void)
-{
-	return 0;
-}
-
-int collie_read_backup_battery(void)
-{
-	int voltage;
-
-	ucb1x00_adc_enable(ucb);
-
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
-	ucb1x00_adc_disable(ucb);
-
-	printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage);
-
-	return ADCtoPower(voltage);
-}
-
-int collie_read_main_battery(void)
-{
-	int voltage, voltage_rev, voltage_volts;
-
-	ucb1x00_adc_enable(ucb);
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
-
-	mdelay(1);
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
-	ucb1x00_adc_disable(ucb);
-
-	voltage_rev = voltage + ((ad_revise * voltage) / 652);
-	voltage_volts = ADCtoPower(voltage_rev);
-
-	printk("Main battery = %d(%d)\n", voltage_volts, voltage);
-
-	if (voltage != -1)
-		return voltage_volts;
-	else
-		return voltage;
-}
-
-int collie_read_temp(void)
-{
-	int voltage;
-
-	/* According to Sharp, temp must be > 973, main battery must be < 465,
-	   FIXME: sharpsl_pm.c has both conditions negated? FIXME: values
-	   are way out of range? */
-
-	ucb1x00_adc_enable(ucb);
-	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
-	/* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
-	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
-	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-	ucb1x00_adc_disable(ucb);
-
-	printk("Battery temp = %d\n", voltage);
-	return voltage;
-}
-
-static unsigned long read_devdata(int which)
-{
-	switch (which) {
-	case SHARPSL_BATT_VOLT:
-		return collie_read_main_battery();
-	case SHARPSL_BATT_TEMP:
-		return collie_read_temp();
-	case SHARPSL_ACIN_VOLT:
-		return 500;
-	case SHARPSL_STATUS_ACIN: {
-		int ret = GPLR & COLLIE_GPIO_AC_IN;
-		printk("AC status = %d\n", ret);
-		return ret;
-	}
-	case SHARPSL_STATUS_FATAL: {
-		int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW;
-		printk("Fatal bat = %d\n", ret);
-		return ret;
-	}
-	default:
-		return ~0;
-	}
-}
-
-struct battery_thresh collie_battery_levels_acin[] = {
-	{ 420, 100},
-	{ 417,  95},
-	{ 415,  90},
-	{ 413,  80},
-	{ 411,  75},
-	{ 408,  70},
-	{ 406,  60},
-	{ 403,  50},
-	{ 398,  40},
-	{ 391,  25},
-	{  10,   5},
-	{   0,   0},
-};
-
-struct battery_thresh collie_battery_levels[] = {
-	{ 394, 100},
-	{ 390,  95},
-	{ 380,  90},
-	{ 370,  80},
-	{ 368,  75},	/* From sharp code: battery high with frontlight */
-	{ 366,  70},	/* 60..90 -- fake values invented by me for testing */
-	{ 364,  60},
-	{ 362,  50},
-	{ 360,  40},
-	{ 358,  25},	/* From sharp code: battery low with frontlight */
-	{ 356,   5},	/* From sharp code: battery verylow with frontlight */
-	{   0,   0},
-};
-
-struct sharpsl_charger_machinfo collie_pm_machinfo = {
-	.init             = collie_charger_init,
-	.read_devdata	  = read_devdata,
-	.discharge        = collie_discharge,
-	.discharge1       = collie_discharge1,
-	.charge           = collie_charge,
-	.measure_temp     = collie_measure_temp,
-	.presuspend       = collie_presuspend,
-	.postsuspend      = collie_postsuspend,
-	.charger_wakeup   = collie_charger_wakeup,
-	.should_wakeup    = collie_should_wakeup,
-	.bat_levels       = 12,
-	.bat_levels_noac  = collie_battery_levels,
-	.bat_levels_acin  = collie_battery_levels_acin,
-	.status_high_acin = 368,
-	.status_low_acin  = 358,
-	.status_high_noac = 368,
-	.status_low_noac  = 358,
-	.charge_on_volt	  = 350,	/* spitz uses 2.90V, but lets play it safe. */
-	.charge_on_temp   = 550,
-	.charge_acin_high = 550,	/* collie does not seem to have sensor for this, anyway */
-	.charge_acin_low  = 450,	/* ignored, too */
-	.fatal_acin_volt  = 356,
-	.fatal_noacin_volt = 356,
-
-	.batfull_irq = 1,		/* We do not want periodical charge restarts */
-};
-
-static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
-{
-	sharpsl_pm.machinfo = &collie_pm_machinfo;
-	ucb = pdev->ucb;
-	return 0;
-}
-
-static struct ucb1x00_driver collie_pm_ucb_driver = {
-	.add	= collie_pm_ucb_add,
-};
-
-static struct platform_device *collie_pm_device;
-
-static int __init collie_pm_init(void)
-{
-	int ret;
-
-	collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!collie_pm_device)
-		return -ENOMEM;
-
-	collie_pm_device->dev.platform_data = &collie_pm_machinfo;
-	ret = platform_device_add(collie_pm_device);
-
-	if (ret)
-		platform_device_put(collie_pm_device);
-
-	if (!ret)
-		ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
-
-	return ret;
-}
-
-static void __exit collie_pm_exit(void)
-{
-	ucb1x00_unregister_driver(&collie_pm_ucb_driver);
-	platform_device_unregister(collie_pm_device);
-}
-
-module_init(collie_pm_init);
-module_exit(collie_pm_exit);
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 28cf3696797..506a5e5a9ad 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -54,7 +54,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse);
  * timeout after <timeout> rounds. Needs mcu running before its called.
  *
  * returns : %mcu output on success
- *	   : %-ETIMEOUT on timeout
+ *	   : %-ETIMEDOUT on timeout
  */
 int jornada_ssp_byte(u8 byte)
 {
@@ -82,7 +82,7 @@ EXPORT_SYMBOL(jornada_ssp_byte);
  * jornada_ssp_inout - decide if input is command or trading byte
  *
  * returns : (jornada_ssp_byte(byte)) on success
- *         : %-ETIMEOUT on timeout failure
+ *         : %-ETIMEDOUT on timeout failure
  */
 int jornada_ssp_inout(u8 byte)
 {
diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile
new file mode 100644
index 00000000000..d156f76b379
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
+obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot
new file mode 100644
index 00000000000..1568ad404d5
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..731a92286da
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x70]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x7f
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h
new file mode 100644
index 00000000000..cc59673becd
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/irqs.h
@@ -0,0 +1,95 @@
+/*
+ * Freescale STMP378X interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#define IRQ_DEBUG_UART			0
+#define IRQ_COMMS_RX			1
+#define IRQ_COMMS_TX			1
+#define IRQ_SSP2_ERROR			2
+#define IRQ_VDD5V			3
+#define IRQ_HEADPHONE_SHORT		4
+#define IRQ_DAC_DMA			5
+#define IRQ_DAC_ERROR			6
+#define IRQ_ADC_DMA			7
+#define IRQ_ADC_ERROR			8
+#define IRQ_SPDIF_DMA			9
+#define IRQ_SAIF2_DMA			9
+#define IRQ_SPDIF_ERROR			10
+#define IRQ_SAIF1_IRQ			10
+#define IRQ_SAIF2_IRQ			10
+#define IRQ_USB_CTRL			11
+#define IRQ_USB_WAKEUP			12
+#define IRQ_GPMI_DMA			13
+#define IRQ_SSP1_DMA			14
+#define IRQ_SSP_ERROR			15
+#define IRQ_GPIO0			16
+#define IRQ_GPIO1			17
+#define IRQ_GPIO2			18
+#define IRQ_SAIF1_DMA			19
+#define IRQ_SSP2_DMA			20
+#define IRQ_ECC8_IRQ			21
+#define IRQ_RTC_ALARM			22
+#define IRQ_UARTAPP_TX_DMA		23
+#define IRQ_UARTAPP_INTERNAL		24
+#define IRQ_UARTAPP_RX_DMA		25
+#define IRQ_I2C_DMA			26
+#define IRQ_I2C_ERROR			27
+#define IRQ_TIMER0			28
+#define IRQ_TIMER1			29
+#define IRQ_TIMER2			30
+#define IRQ_TIMER3			31
+#define IRQ_BATT_BRNOUT			32
+#define IRQ_VDDD_BRNOUT			33
+#define IRQ_VDDIO_BRNOUT		34
+#define IRQ_VDD18_BRNOUT		35
+#define IRQ_TOUCH_DETECT		36
+#define IRQ_LRADC_CH0			37
+#define IRQ_LRADC_CH1			38
+#define IRQ_LRADC_CH2			39
+#define IRQ_LRADC_CH3			40
+#define IRQ_LRADC_CH4			41
+#define IRQ_LRADC_CH5			42
+#define IRQ_LRADC_CH6			43
+#define IRQ_LRADC_CH7			44
+#define IRQ_LCDIF_DMA			45
+#define IRQ_LCDIF_ERROR			46
+#define IRQ_DIGCTL_DEBUG_TRAP		47
+#define IRQ_RTC_1MSEC			48
+#define IRQ_DRI_DMA			49
+#define IRQ_DRI_ATTENTION		50
+#define IRQ_GPMI_ATTENTION		51
+#define IRQ_IR				52
+#define IRQ_DCP_VMI			53
+#define IRQ_DCP				54
+#define IRQ_BCH				56
+#define IRQ_PXP				57
+#define IRQ_UARTAPP2_TX_DMA		58
+#define IRQ_UARTAPP2_INTERNAL		59
+#define IRQ_UARTAPP2_RX_DMA		60
+#define IRQ_VDAC_DETECT			61
+#define IRQ_VDD5V_DROOP			64
+#define IRQ_DCDC4P2_BO			65
+
+
+#define NR_REAL_IRQS	128
+#define NR_IRQS		(NR_REAL_IRQS + 32 * 3)
+
+/* All interrupts are FIQ capable */
+#define FIQ_START		IRQ_DEBUG_UART
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h
new file mode 100644
index 00000000000..93f952d3596
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/pins.h
@@ -0,0 +1,151 @@
+/*
+ * Freescale STMP378X SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_CLE		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_ALE		STMP3XXX_PINID(0, 17)
+#define PINID_GMPI_CE2N		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY1		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_WPN		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_AUART1_CTS	STMP3XXX_PINID(0, 26)
+#define PINID_AUART1_RTS	STMP3XXX_PINID(0, 27)
+#define PINID_AUART1_RX		STMP3XXX_PINID(0, 28)
+#define PINID_AUART1_TX		STMP3XXX_PINID(0, 29)
+#define PINID_I2C_SCL		STMP3XXX_PINID(0, 30)
+#define PINID_I2C_SDA		STMP3XXX_PINID(0, 31)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_D16		STMP3XXX_PINID(1, 16)
+#define PINID_LCD_D17		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_RESET		STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_WR		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 21)
+#define PINID_LCD_DOTCK		STMP3XXX_PINID(1, 22)
+#define PINID_LCD_ENABLE	STMP3XXX_PINID(1, 23)
+#define PINID_LCD_HSYNC		STMP3XXX_PINID(1, 24)
+#define PINID_LCD_VSYNC		STMP3XXX_PINID(1, 25)
+#define PINID_PWM0		STMP3XXX_PINID(1, 26)
+#define PINID_PWM1		STMP3XXX_PINID(1, 27)
+#define PINID_PWM2		STMP3XXX_PINID(1, 28)
+#define PINID_PWM3		STMP3XXX_PINID(1, 29)
+#define PINID_PWM4		STMP3XXX_PINID(1, 30)
+
+/* Bank 2 */
+#define PINID_SSP1_CMD		STMP3XXX_PINID(2, 0)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(2, 1)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(2, 2)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(2, 3)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(2, 4)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(2, 5)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(2, 6)
+#define PINID_ROTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_BA0		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_BA1		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 26)
+#define PINID_GPMI_CE1N		STMP3XXX_PINID(2, 27)
+#define PINID_GPMI_CE0N		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
new file mode 100644
index 00000000000..dbcf85b6ac2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
@@ -0,0 +1,101 @@
+/*
+ * stmp378x: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+#define REGS_APBH_PHYS	0x80004000
+#define REGS_APBH_SIZE	0x2000
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_CTRL2		0x20
+
+#define HW_APBH_DEVSEL		0x30
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBH_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBH_CHn_CMD_COMMAND	0x00000003
+#define BP_APBH_CHn_CMD_COMMAND	0
+#define BM_APBH_CHn_CMD_CHAIN	0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
new file mode 100644
index 00000000000..3b934a4d27f
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
@@ -0,0 +1,119 @@
+/*
+ * stmp378x: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+#define REGS_APBX_PHYS	0x80024000
+#define REGS_APBX_SIZE	0x2000
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_CTRL2		0x20
+
+#define HW_APBX_CHANNEL_CTRL	0x30
+#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL	0xFFFF0000
+#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL	16
+
+#define HW_APBX_DEVSEL		0x40
+
+#define HW_APBX_CH0_NXTCMDAR	(0x110 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x110 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x110 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x110 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x110 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x110 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x110 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x110 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x110 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x110 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x110 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x110 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x110 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x110 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x110 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x110 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x110
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER	 0
+#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE	 1
+#define BV_APBX_CHn_CMD_COMMAND__DMA_READ	 2
+#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE	 3
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_HALTONTERMINATE	0x00000100
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x130 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x130 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x130 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x130 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x130 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x130 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x130 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x130 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x130 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x130 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x130 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x130 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x130 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x130 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x130 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x130 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x130
+
+#define HW_APBX_CH0_SEMA	(0x140 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x140 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x140 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x140 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x140 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x140 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x140 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x140 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x140 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x140 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x140 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x140 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x140 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x140 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x140 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x140 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x140
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
+
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
new file mode 100644
index 00000000000..641ac6126f8
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+#define REGS_AUDIOIN_PHYS	0x8004C000
+#define REGS_AUDIOIN_SIZE	0x2000
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
new file mode 100644
index 00000000000..f533e23694a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
@@ -0,0 +1,104 @@
+/*
+ * stmp378x: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+#define REGS_AUDIOOUT_PHYS	0x80048000
+#define REGS_AUDIOOUT_SIZE	0x2000
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_SPEAKER	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_SPEAKERCTRL	0x100
+#define BM_AUDIOOUT_SPEAKERCTRL_MUTE	0x01000000
+
+#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
new file mode 100644
index 00000000000..532d2465071
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
@@ -0,0 +1,56 @@
+/*
+ * stmp378x: BCH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_BCH_BASE	(STMP3XXX_REGS_BASE + 0xA000)
+#define REGS_BCH_PHYS	0x8000A000
+#define REGS_BCH_SIZE	0x2000
+
+#define HW_BCH_CTRL		0x0
+#define BM_BCH_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_BCH_CTRL_COMPLETE_IRQ	0
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN	0x00000100
+
+#define HW_BCH_STATUS0		0x10
+#define BM_BCH_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_BCH_STATUS0_CORRECTED	0x00000008
+#define BM_BCH_STATUS0_STATUS_BLK0	0x0000FF00
+#define BP_BCH_STATUS0_STATUS_BLK0	8
+#define BM_BCH_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_BCH_STATUS0_COMPLETED_CE	16
+
+#define HW_BCH_LAYOUTSELECT	0x70
+
+#define HW_BCH_FLASH0LAYOUT0	0x80
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE	0
+#define BM_BCH_FLASH0LAYOUT0_ECC0	0x0000F000
+#define BP_BCH_FLASH0LAYOUT0_ECC0	12
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE	0x00FF0000
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE	16
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS	0xFF000000
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS	24
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	0x00000FFF
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE	0
+#define BM_BCH_FLASH0LAYOUT1_ECCN	0x0000F000
+#define BP_BCH_FLASH0LAYOUT1_ECCN	12
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE	0xFFFF0000
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE	16
+
+#define HW_BCH_BLOCKNAME	0x150
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
new file mode 100644
index 00000000000..7c546afd57a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp378x: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+#define REGS_CLKCTRL_PHYS	0x80040000
+#define REGS_CLKCTRL_SIZE	0x2000
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00000FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
+#define BP_CLKCTRL_EMI_DIV_EMI	0
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_TV		0xD0
+
+#define HW_CLKCTRL_ETM		0xE0
+
+#define HW_CLKCTRL_FRAC		0xF0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_FRAC1	0x100
+
+#define HW_CLKCTRL_CLKSEQ	0x110
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0x120
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
new file mode 100644
index 00000000000..fdedd00c0e2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: DCP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DCP_BASE	(STMP3XXX_REGS_BASE + 0x28000)
+#define REGS_DCP_PHYS	0x80028000
+#define REGS_DCP_SIZE	0x2000
+
+#define HW_DCP_CTRL		0x0
+#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0x000000FF
+#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE	0
+#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING	0x00400000
+#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES	0x00800000
+#define BM_DCP_CTRL_CLKGATE	0x40000000
+#define BM_DCP_CTRL_SFTRST	0x80000000
+
+#define HW_DCP_STAT		0x10
+#define BM_DCP_STAT_IRQ		0x0000000F
+#define BP_DCP_STAT_IRQ		0
+
+#define HW_DCP_CHANNELCTRL	0x20
+#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL	0x000000FF
+#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL	0
+
+#define HW_DCP_CONTEXT		0x50
+#define BM_DCP_PACKET1_INTERRUPT	0x00000001
+#define BP_DCP_PACKET1_INTERRUPT	0
+#define BM_DCP_PACKET1_DECR_SEMAPHORE	0x00000002
+#define BM_DCP_PACKET1_CHAIN	0x00000004
+#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS	0x00000008
+#define BM_DCP_PACKET1_ENABLE_CIPHER	0x00000020
+#define BM_DCP_PACKET1_ENABLE_HASH	0x00000040
+#define BM_DCP_PACKET1_CIPHER_ENCRYPT	0x00000100
+#define BM_DCP_PACKET1_CIPHER_INIT	0x00000200
+#define BM_DCP_PACKET1_OTP_KEY	0x00000400
+#define BM_DCP_PACKET1_PAYLOAD_KEY	0x00000800
+#define BM_DCP_PACKET1_HASH_INIT	0x00001000
+#define BM_DCP_PACKET1_HASH_TERM	0x00002000
+#define BM_DCP_PACKET2_CIPHER_SELECT	0x0000000F
+#define BP_DCP_PACKET2_CIPHER_SELECT	0
+#define BM_DCP_PACKET2_CIPHER_MODE	0x000000F0
+#define BP_DCP_PACKET2_CIPHER_MODE	4
+#define BM_DCP_PACKET2_KEY_SELECT	0x0000FF00
+#define BP_DCP_PACKET2_KEY_SELECT	8
+#define BM_DCP_PACKET2_HASH_SELECT	0x000F0000
+#define BP_DCP_PACKET2_HASH_SELECT	16
+#define BM_DCP_PACKET2_CIPHER_CFG	0xFF000000
+#define BP_DCP_PACKET2_CIPHER_CFG	24
+
+#define HW_DCP_CH0CMDPTR	(0x100 + 0 * 0x40)
+#define HW_DCP_CH1CMDPTR	(0x100 + 1 * 0x40)
+#define HW_DCP_CH2CMDPTR	(0x100 + 2 * 0x40)
+#define HW_DCP_CH3CMDPTR	(0x100 + 3 * 0x40)
+
+#define HW_DCP_CHnCMDPTR	0x100
+
+#define HW_DCP_CH0SEMA		(0x110 + 0 * 0x40)
+#define HW_DCP_CH1SEMA		(0x110 + 1 * 0x40)
+#define HW_DCP_CH2SEMA		(0x110 + 2 * 0x40)
+#define HW_DCP_CH3SEMA		(0x110 + 3 * 0x40)
+
+#define HW_DCP_CHnSEMA		0x110
+#define BM_DCP_CHnSEMA_INCREMENT	0x000000FF
+#define BP_DCP_CHnSEMA_INCREMENT	0
+
+#define HW_DCP_CH0STAT		(0x120 + 0 * 0x40)
+#define HW_DCP_CH1STAT		(0x120 + 1 * 0x40)
+#define HW_DCP_CH2STAT		(0x120 + 2 * 0x40)
+#define HW_DCP_CH3STAT		(0x120 + 3 * 0x40)
+
+#define HW_DCP_CHnSTAT		0x120
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
new file mode 100644
index 00000000000..5293005523b
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
@@ -0,0 +1,38 @@
+/*
+ * stmp378x: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+#define REGS_DIGCTL_PHYS	0x8001C000
+#define REGS_DIGCTL_SIZE	0x2000
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
+
+#define HW_DIGCTL_ARMCACHE	0x2B0
+#define BM_DIGCTL_ARMCACHE_ITAG_SS	0x00000003
+#define BP_DIGCTL_ARMCACHE_ITAG_SS	0
+#define BM_DIGCTL_ARMCACHE_DTAG_SS	0x00000030
+#define BP_DIGCTL_ARMCACHE_DTAG_SS	4
+#define BM_DIGCTL_ARMCACHE_CACHE_SS	0x00000300
+#define BP_DIGCTL_ARMCACHE_CACHE_SS	8
+#define BM_DIGCTL_ARMCACHE_DRTY_SS	0x00003000
+#define BP_DIGCTL_ARMCACHE_DRTY_SS	12
+#define BM_DIGCTL_ARMCACHE_VALID_SS	0x00030000
+#define BP_DIGCTL_ARMCACHE_VALID_SS	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
new file mode 100644
index 00000000000..02851431677
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
@@ -0,0 +1,27 @@
+/*
+ * stmp378x: DRAM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRAM_BASE	(STMP3XXX_REGS_BASE + 0xE0000)
+#define REGS_DRAM_PHYS	0x800E0000
+#define REGS_DRAM_SIZE	0x2000
+
+#define HW_DRAM_CTL06		0x18
+
+#define HW_DRAM_CTL08		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
new file mode 100644
index 00000000000..da25f7e397e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: DRI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DRI_BASE	(STMP3XXX_REGS_BASE + 0x74000)
+#define REGS_DRI_PHYS	0x80074000
+#define REGS_DRI_SIZE	0x2000
+
+#define HW_DRI_CTRL		0x0
+#define BM_DRI_CTRL_RUN		0x00000001
+#define BP_DRI_CTRL_RUN		0
+#define BM_DRI_CTRL_ATTENTION_IRQ	0x00000002
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ	0x00000004
+#define BM_DRI_CTRL_OVERFLOW_IRQ	0x00000008
+#define BM_DRI_CTRL_ATTENTION_IRQ_EN	0x00000200
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN	0x00000400
+#define BM_DRI_CTRL_OVERFLOW_IRQ_EN	0x00000800
+#define BM_DRI_CTRL_REACQUIRE_PHASE	0x00008000
+#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR	0x02000000
+#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR	0x04000000
+#define BM_DRI_CTRL_ENABLE_INPUTS	0x20000000
+#define BM_DRI_CTRL_CLKGATE	0x40000000
+#define BM_DRI_CTRL_SFTRST	0x80000000
+
+#define HW_DRI_TIMING		0x10
+#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL	0x000000FF
+#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL	0
+#define BM_DRI_TIMING_PILOT_REP_RATE	0x000F0000
+#define BP_DRI_TIMING_PILOT_REP_RATE	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
new file mode 100644
index 00000000000..cc353bec331
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
@@ -0,0 +1,39 @@
+/*
+ * stmp378x: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+#define REGS_ECC8_PHYS	0x80008000
+#define REGS_ECC8_SIZE	0x2000
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
new file mode 100644
index 00000000000..98773fc33d7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
@@ -0,0 +1,25 @@
+/*
+ * stmp378x: EMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_EMI_BASE	(STMP3XXX_REGS_BASE + 0x20000)
+#define REGS_EMI_PHYS	0x80020000
+#define REGS_EMI_SIZE	0x2000
+
+#define HW_EMI_STAT		0x10
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..2cc8bbe9168
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
@@ -0,0 +1,78 @@
+/*
+ * stmp378x: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_ADDRESS      0x000E0000
+#define BP_GPMI_CTRL0_ADDRESS      17
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA  0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE   0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE   0x2
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT      0x00010000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_BUFFER_MASK	0x000001FF
+#define BP_GPMI_ECCCTRL_BUFFER_MASK	0
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT			0
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT			1
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT			2
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT			3
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000001
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_RDN_DELAY	0x0000F000
+#define BP_GPMI_CTRL1_RDN_DELAY	12
+#define BM_GPMI_CTRL1_BCH_MODE	0x00040000
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+#define BM_GPMI_TIMING0_ADDRESS_SETUP	0x00FF0000
+#define BP_GPMI_TIMING0_ADDRESS_SETUP	16
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..13a234c9943
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp378x: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
new file mode 100644
index 00000000000..f996e80f40e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+#define REGS_ICOLL_PHYS	0x80000000
+#define REGS_ICOLL_SIZE	0x2000
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+#define BM_ICOLL_LEVELACK_IRQLEVELACK	0x0000000F
+#define BP_ICOLL_LEVELACK_IRQLEVELACK	0
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x70
+
+#define HW_ICOLL_INTERRUPTn	0x120
+
+#define HW_ICOLL_INTERRUPTn	0x120
+#define BM_ICOLL_INTERRUPTn_ENABLE	0x00000004
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
index 9e197ae4590..a5b4ef10fab 100644
--- a/arch/arm/mach-imx/include/mach/io.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
@@ -1,7 +1,8 @@
 /*
- *  arch/arm/mach-imxads/include/mach/io.h
+ * stmp378x: IR register definitions
  *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,14 +16,8 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
+#define REGS_IR_BASE	(STMP3XXX_REGS_BASE + 0x78000)
+#define REGS_IR_PHYS	0x80078000
+#define REGS_IR_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
new file mode 100644
index 00000000000..9cdbef4badc
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
@@ -0,0 +1,195 @@
+/*
+ * stmp378x: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_RUN	0x00000001
+#define BP_LCDIF_CTRL_RUN	0
+#define BM_LCDIF_CTRL_LCDIF_MASTER	0x00000020
+#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC	0x00000080
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00000300
+#define BP_LCDIF_CTRL_WORD_LENGTH	8
+#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH	0x00000C00
+#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH	10
+#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE	0x0000C000
+#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE	14
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00010000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00020000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00040000
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00080000
+#define BM_LCDIF_CTRL_DVI_MODE	0x00100000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x03E00000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	21
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x04000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x08000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+#define BM_LCDIF_CTRL1_INTERLACE_FIELDS	0x00800000
+#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW	0x01000000
+
+#define HW_LCDIF_TRANSFER_COUNT	0x20
+#define BM_LCDIF_TRANSFER_COUNT_H_COUNT	0x0000FFFF
+#define BP_LCDIF_TRANSFER_COUNT_H_COUNT	0
+#define BM_LCDIF_TRANSFER_COUNT_V_COUNT	0xFFFF0000
+#define BP_LCDIF_TRANSFER_COUNT_V_COUNT	16
+
+#define HW_LCDIF_CUR_BUF	0x30
+
+#define HW_LCDIF_NEXT_BUF	0x40
+
+#define HW_LCDIF_TIMING		0x60
+
+#define HW_LCDIF_VDCTRL0	0x70
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0x0003FFFF
+#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x80
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0xFFFFFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+
+#define HW_LCDIF_VDCTRL2	0x90
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x0003FFFF
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF000000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	24
+
+#define HW_LCDIF_VDCTRL3	0xA0
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x0000FFFF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x0FFF0000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	16
+
+#define HW_LCDIF_VDCTRL4	0xB0
+#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0x0003FFFF
+#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON	0x00040000
+
+#define HW_LCDIF_DVICTRL0	0xC0
+#define BM_LCDIF_DVICTRL0_V_LINES_CNT	0x000003FF
+#define BP_LCDIF_DVICTRL0_V_LINES_CNT	0
+#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT	0x000FFC00
+#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT	10
+#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT	0x7FF00000
+#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT	20
+
+#define HW_LCDIF_DVICTRL1	0xD0
+#define BM_LCDIF_DVICTRL1_F2_START_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL1_F2_START_LINE	0
+#define BM_LCDIF_DVICTRL1_F1_END_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL1_F1_END_LINE	10
+#define BM_LCDIF_DVICTRL1_F1_START_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL1_F1_START_LINE	20
+
+#define HW_LCDIF_DVICTRL2	0xE0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE	0x000FFC00
+#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE	10
+#define BM_LCDIF_DVICTRL2_F2_END_LINE	0x3FF00000
+#define BP_LCDIF_DVICTRL2_F2_END_LINE	20
+
+#define HW_LCDIF_DVICTRL3	0xF0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0x000003FF
+#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE	0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE	0x03FF0000
+#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE	16
+
+#define HW_LCDIF_DVICTRL4	0x100
+#define BM_LCDIF_DVICTRL4_H_FILL_CNT	0x000000FF
+#define BP_LCDIF_DVICTRL4_H_FILL_CNT	0
+#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE	0x0000FF00
+#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE	8
+#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE	0x00FF0000
+#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE	16
+#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE	0xFF000000
+#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE	24
+
+#define HW_LCDIF_CSC_COEFF0	0x110
+#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0x00000003
+#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER	0
+#define BM_LCDIF_CSC_COEFF0_C0	0x03FF0000
+#define BP_LCDIF_CSC_COEFF0_C0	16
+
+#define HW_LCDIF_CSC_COEFF1	0x120
+#define BM_LCDIF_CSC_COEFF1_C1	0x000003FF
+#define BP_LCDIF_CSC_COEFF1_C1	0
+#define BM_LCDIF_CSC_COEFF1_C2	0x03FF0000
+#define BP_LCDIF_CSC_COEFF1_C2	16
+
+#define HW_LCDIF_CSC_COEFF2	0x130
+#define BM_LCDIF_CSC_COEFF2_C3	0x000003FF
+#define BP_LCDIF_CSC_COEFF2_C3	0
+#define BM_LCDIF_CSC_COEFF2_C4	0x03FF0000
+#define BP_LCDIF_CSC_COEFF2_C4	16
+
+#define HW_LCDIF_CSC_COEFF3	0x140
+#define BM_LCDIF_CSC_COEFF3_C5	0x000003FF
+#define BP_LCDIF_CSC_COEFF3_C5	0
+#define BM_LCDIF_CSC_COEFF3_C6	0x03FF0000
+#define BP_LCDIF_CSC_COEFF3_C6	16
+
+#define HW_LCDIF_CSC_COEFF4	0x150
+#define BM_LCDIF_CSC_COEFF4_C7	0x000003FF
+#define BP_LCDIF_CSC_COEFF4_C7	0
+#define BM_LCDIF_CSC_COEFF4_C8	0x03FF0000
+#define BP_LCDIF_CSC_COEFF4_C8	16
+
+#define HW_LCDIF_CSC_OFFSET	0x160
+#define BM_LCDIF_CSC_OFFSET_Y_OFFSET	0x000001FF
+#define BP_LCDIF_CSC_OFFSET_Y_OFFSET	0
+#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET	0x01FF0000
+#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET	16
+
+#define HW_LCDIF_CSC_LIMIT	0x170
+#define BM_LCDIF_CSC_LIMIT_Y_MAX	0x000000FF
+#define BP_LCDIF_CSC_LIMIT_Y_MAX	0
+#define BM_LCDIF_CSC_LIMIT_Y_MIN	0x0000FF00
+#define BP_LCDIF_CSC_LIMIT_Y_MIN	8
+#define BM_LCDIF_CSC_LIMIT_CBCR_MAX	0x00FF0000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MAX	16
+#define BM_LCDIF_CSC_LIMIT_CBCR_MIN	0xFF000000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MIN	24
+
+#define HW_LCDIF_STAT		0x1D0
+#define BM_LCDIF_STAT_TXFIFO_EMPTY	0x04000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
new file mode 100644
index 00000000000..cb8cb06f827
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
@@ -0,0 +1,99 @@
+/*
+ * stmp378x: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+#define REGS_LRADC_PHYS	0x80050000
+#define REGS_LRADC_SIZE	0x2000
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
new file mode 100644
index 00000000000..f0af64d9937
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: OCOTP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_OCOTP_BASE	(STMP3XXX_REGS_BASE + 0x2C000)
+#define REGS_OCOTP_PHYS	0x8002C000
+#define REGS_OCOTP_SIZE	0x2000
+
+#define HW_OCOTP_CTRL		0x0
+#define BM_OCOTP_CTRL_BUSY	0x00000100
+#define BM_OCOTP_CTRL_ERROR	0x00000200
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	0x00001000
+#define BM_OCOTP_CTRL_RELOAD_SHADOWS	0x00002000
+#define BM_OCOTP_CTRL_WR_UNLOCK	0xFFFF0000
+#define BP_OCOTP_CTRL_WR_UNLOCK	16
+
+#define HW_OCOTP_DATA		0x10
+
+#define HW_OCOTP_CUST0		(0x20 + 0 * 0x10)
+#define HW_OCOTP_CUST1		(0x20 + 1 * 0x10)
+#define HW_OCOTP_CUST2		(0x20 + 2 * 0x10)
+#define HW_OCOTP_CUST3		(0x20 + 3 * 0x10)
+
+#define HW_OCOTP_CUSTn		0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
new file mode 100644
index 00000000000..50d90ea1b13
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
@@ -0,0 +1,90 @@
+/*
+ * stmp378x: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+#define REGS_PINCTRL_PHYS	0x80018000
+#define REGS_PINCTRL_SIZE	0x2000
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x400
+#define HW_PINCTRL_PULL1	0x410
+#define HW_PINCTRL_PULL2	0x420
+#define HW_PINCTRL_PULL3	0x430
+
+#define HW_PINCTRL_DOUT0	0x500
+#define HW_PINCTRL_DOUT1	0x510
+#define HW_PINCTRL_DOUT2	0x520
+
+#define HW_PINCTRL_DIN0		0x600
+#define HW_PINCTRL_DIN1		0x610
+#define HW_PINCTRL_DIN2		0x620
+
+#define HW_PINCTRL_DOE0		0x700
+#define HW_PINCTRL_DOE1		0x710
+#define HW_PINCTRL_DOE2		0x720
+
+#define HW_PINCTRL_PIN2IRQ0	0x800
+#define HW_PINCTRL_PIN2IRQ1	0x810
+#define HW_PINCTRL_PIN2IRQ2	0x820
+
+#define HW_PINCTRL_IRQEN0	0x900
+#define HW_PINCTRL_IRQEN1	0x910
+#define HW_PINCTRL_IRQEN2	0x920
+
+#define HW_PINCTRL_IRQLEVEL0	0xA00
+#define HW_PINCTRL_IRQLEVEL1	0xA10
+#define HW_PINCTRL_IRQLEVEL2	0xA20
+
+#define HW_PINCTRL_IRQPOL0	0xB00
+#define HW_PINCTRL_IRQPOL1	0xB10
+#define HW_PINCTRL_IRQPOL2	0xB20
+
+#define HW_PINCTRL_IRQSTAT0	0xC00
+#define HW_PINCTRL_IRQSTAT1	0xC10
+#define HW_PINCTRL_IRQSTAT2	0xC20
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h
new file mode 100644
index 00000000000..e454c830f07
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-power.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+#define REGS_POWER_PHYS	0x80044000
+#define REGS_POWER_SIZE	0x2000
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0x00000001
+#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO	0
+#define BM_POWER_CTRL_ENIRQ_PSWITCH	0x00020000
+#define BM_POWER_CTRL_PSWITCH_IRQ	0x00100000
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT	0x00000040
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xC0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000200
+
+#define HW_POWER_RESET		0x100
+
+#define HW_POWER_DEBUG		0x110
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
new file mode 100644
index 00000000000..0d0f9e56ec7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
@@ -0,0 +1,53 @@
+/*
+ * stmp378x: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+#define REGS_PWM_PHYS	0x80064000
+#define REGS_PWM_SIZE	0x2000
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
new file mode 100644
index 00000000000..54d297896de
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
@@ -0,0 +1,140 @@
+/*
+ * stmp378x: PXP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PXP_BASE	(STMP3XXX_REGS_BASE + 0x2A000)
+#define REGS_PXP_PHYS	0x8002A000
+#define REGS_PXP_SIZE	0x2000
+
+#define HW_PXP_CTRL		0x0
+#define BM_PXP_CTRL_ENABLE	0x00000001
+#define BP_PXP_CTRL_ENABLE	0
+#define BM_PXP_CTRL_IRQ_ENABLE	0x00000002
+#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT	0x000000F0
+#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT	4
+#define BM_PXP_CTRL_ROTATE	0x00000300
+#define BP_PXP_CTRL_ROTATE	8
+#define BM_PXP_CTRL_HFLIP	0x00000400
+#define BM_PXP_CTRL_VFLIP	0x00000800
+#define BM_PXP_CTRL_S0_FORMAT	0x0000F000
+#define BP_PXP_CTRL_S0_FORMAT	12
+#define BM_PXP_CTRL_SCALE	0x00040000
+#define BM_PXP_CTRL_CROP	0x00080000
+
+#define HW_PXP_STAT		0x10
+#define BM_PXP_STAT_IRQ		0x00000001
+#define BP_PXP_STAT_IRQ		0
+
+#define HW_PXP_RGBBUF		0x20
+
+#define HW_PXP_RGBSIZE		0x40
+#define BM_PXP_RGBSIZE_HEIGHT	0x00000FFF
+#define BP_PXP_RGBSIZE_HEIGHT	0
+#define BM_PXP_RGBSIZE_WIDTH	0x00FFF000
+#define BP_PXP_RGBSIZE_WIDTH	12
+
+#define HW_PXP_S0BUF		0x50
+
+#define HW_PXP_S0UBUF		0x60
+
+#define HW_PXP_S0VBUF		0x70
+
+#define HW_PXP_S0PARAM		0x80
+#define BM_PXP_S0PARAM_HEIGHT	0x000000FF
+#define BP_PXP_S0PARAM_HEIGHT	0
+#define BM_PXP_S0PARAM_WIDTH	0x0000FF00
+#define BP_PXP_S0PARAM_WIDTH	8
+#define BM_PXP_S0PARAM_YBASE	0x00FF0000
+#define BP_PXP_S0PARAM_YBASE	16
+#define BM_PXP_S0PARAM_XBASE	0xFF000000
+#define BP_PXP_S0PARAM_XBASE	24
+
+#define HW_PXP_S0BACKGROUND	0x90
+
+#define HW_PXP_S0CROP		0xA0
+#define BM_PXP_S0CROP_HEIGHT	0x000000FF
+#define BP_PXP_S0CROP_HEIGHT	0
+#define BM_PXP_S0CROP_WIDTH	0x0000FF00
+#define BP_PXP_S0CROP_WIDTH	8
+#define BM_PXP_S0CROP_YBASE	0x00FF0000
+#define BP_PXP_S0CROP_YBASE	16
+#define BM_PXP_S0CROP_XBASE	0xFF000000
+#define BP_PXP_S0CROP_XBASE	24
+
+#define HW_PXP_S0SCALE		0xB0
+#define BM_PXP_S0SCALE_XSCALE	0x00003FFF
+#define BP_PXP_S0SCALE_XSCALE	0
+#define BM_PXP_S0SCALE_YSCALE	0x3FFF0000
+#define BP_PXP_S0SCALE_YSCALE	16
+
+#define HW_PXP_CSCCOEFF0	0xD0
+
+#define HW_PXP_CSCCOEFF1	0xE0
+
+#define HW_PXP_CSCCOEFF2	0xF0
+
+#define HW_PXP_S0COLORKEYLOW	0x180
+
+#define HW_PXP_S0COLORKEYHIGH	0x190
+
+#define HW_PXP_OL0		(0x200 + 0 * 0x40)
+#define HW_PXP_OL1		(0x200 + 1 * 0x40)
+#define HW_PXP_OL2		(0x200 + 2 * 0x40)
+#define HW_PXP_OL3		(0x200 + 3 * 0x40)
+#define HW_PXP_OL4		(0x200 + 4 * 0x40)
+#define HW_PXP_OL5		(0x200 + 5 * 0x40)
+#define HW_PXP_OL6		(0x200 + 6 * 0x40)
+#define HW_PXP_OL7		(0x200 + 7 * 0x40)
+
+#define HW_PXP_OLn		0x200
+
+#define HW_PXP_OL0SIZE		(0x210 + 0 * 0x40)
+#define HW_PXP_OL1SIZE		(0x210 + 1 * 0x40)
+#define HW_PXP_OL2SIZE		(0x210 + 2 * 0x40)
+#define HW_PXP_OL3SIZE		(0x210 + 3 * 0x40)
+#define HW_PXP_OL4SIZE		(0x210 + 4 * 0x40)
+#define HW_PXP_OL5SIZE		(0x210 + 5 * 0x40)
+#define HW_PXP_OL6SIZE		(0x210 + 6 * 0x40)
+#define HW_PXP_OL7SIZE		(0x210 + 7 * 0x40)
+
+#define HW_PXP_OLnSIZE		0x210
+#define BM_PXP_OLnSIZE_HEIGHT	0x000000FF
+#define BP_PXP_OLnSIZE_HEIGHT	0
+#define BM_PXP_OLnSIZE_WIDTH	0x0000FF00
+#define BP_PXP_OLnSIZE_WIDTH	8
+
+#define HW_PXP_OL0PARAM		(0x220 + 0 * 0x40)
+#define HW_PXP_OL1PARAM		(0x220 + 1 * 0x40)
+#define HW_PXP_OL2PARAM		(0x220 + 2 * 0x40)
+#define HW_PXP_OL3PARAM		(0x220 + 3 * 0x40)
+#define HW_PXP_OL4PARAM		(0x220 + 4 * 0x40)
+#define HW_PXP_OL5PARAM		(0x220 + 5 * 0x40)
+#define HW_PXP_OL6PARAM		(0x220 + 6 * 0x40)
+#define HW_PXP_OL7PARAM		(0x220 + 7 * 0x40)
+
+#define HW_PXP_OLnPARAM		0x220
+#define BM_PXP_OLnPARAM_ENABLE	0x00000001
+#define BP_PXP_OLnPARAM_ENABLE	0
+#define BM_PXP_OLnPARAM_ALPHA_CNTL	0x00000006
+#define BP_PXP_OLnPARAM_ALPHA_CNTL	1
+#define BM_PXP_OLnPARAM_ENABLE_COLORKEY	0x00000008
+#define BM_PXP_OLnPARAM_FORMAT	0x000000F0
+#define BP_PXP_OLnPARAM_FORMAT	4
+#define BM_PXP_OLnPARAM_ALPHA	0x0000FF00
+#define BP_PXP_OLnPARAM_ALPHA	8
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..b8dbd6742d9
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
@@ -0,0 +1,59 @@
+/*
+ * stmp378x: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS	0x8005C000
+#define REGS_RTC_SIZE	0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+#define BM_RTC_PERSISTENT1_GENERAL	0xFFFFFFFF
+#define BP_RTC_PERSISTENT1_GENERAL	0
+
+#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
index e22ba789546..6df41762c2a 100644
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
@@ -1,7 +1,8 @@
 /*
- *  linux/include/asm-arm/imx/timex.h
+ * stmp378x: SAIF register definitions
  *
- *  Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,12 +16,6 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(16000000)
-
-#endif
+#define REGS_SAIF_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
new file mode 100644
index 00000000000..801539848c2
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
@@ -0,0 +1,49 @@
+/*
+ * stmp378x: SPDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SPDIF_BASE	(STMP3XXX_REGS_BASE + 0x54000)
+#define REGS_SPDIF_PHYS	0x80054000
+#define REGS_SPDIF_SIZE	0x2000
+
+#define HW_SPDIF_CTRL		0x0
+#define BM_SPDIF_CTRL_RUN	0x00000001
+#define BP_SPDIF_CTRL_RUN	0
+#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_SPDIF_CTRL_WORD_LENGTH	0x00000010
+#define BM_SPDIF_CTRL_CLKGATE	0x40000000
+#define BM_SPDIF_CTRL_SFTRST	0x80000000
+
+#define HW_SPDIF_STAT		0x10
+
+#define HW_SPDIF_FRAMECTRL	0x20
+
+#define HW_SPDIF_SRR		0x30
+#define BM_SPDIF_SRR_RATE	0x000FFFFF
+#define BP_SPDIF_SRR_RATE	0
+#define BM_SPDIF_SRR_BASEMULT	0x70000000
+#define BP_SPDIF_SRR_BASEMULT	28
+
+#define HW_SPDIF_DEBUG		0x40
+
+#define HW_SPDIF_DATA		0x50
+
+#define HW_SPDIF_VERSION	0x60
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..28aacf0f58e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
@@ -0,0 +1,102 @@
+/*
+ * stmp378x: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP1_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_BASE	(STMP3XXX_REGS_BASE + 0x34000)
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
new file mode 100644
index 00000000000..08343a8b556
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
@@ -0,0 +1,23 @@
+/*
+ * stmp378x: SYDMA register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SYDMA_BASE	(STMP3XXX_REGS_BASE + 0x26000)
+#define REGS_SYDMA_PHYS	0x80026000
+#define REGS_SYDMA_SIZE	0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
new file mode 100644
index 00000000000..b5527957c67
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
@@ -0,0 +1,68 @@
+/*
+ * stmp378x: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+#define REGS_TIMROT_PHYS	0x80068000
+#define REGS_TIMROT_SIZE	0x2000
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_SELECT_A	0x00000007
+#define BP_TIMROT_ROTCTRL_SELECT_A	0
+#define BM_TIMROT_ROTCTRL_SELECT_B	0x00000070
+#define BP_TIMROT_ROTCTRL_SELECT_B	4
+#define BM_TIMROT_ROTCTRL_POLARITY_A	0x00000100
+#define BM_TIMROT_ROTCTRL_POLARITY_B	0x00000200
+#define BM_TIMROT_ROTCTRL_OVERSAMPLE	0x00000C00
+#define BP_TIMROT_ROTCTRL_OVERSAMPLE	10
+#define BM_TIMROT_ROTCTRL_RELATIVE	0x00001000
+#define BM_TIMROT_ROTCTRL_DIVIDER	0x003F0000
+#define BP_TIMROT_ROTCTRL_DIVIDER	16
+#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT	0x20000000
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_ROTCOUNT	0x10
+#define BM_TIMROT_ROTCOUNT_UPDOWN	0x0000FFFF
+#define BP_TIMROT_ROTCOUNT_UPDOWN	0
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
new file mode 100644
index 00000000000..7f895cb3435
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
@@ -0,0 +1,67 @@
+/*
+ * stmp378x: TVENC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_TVENC_BASE	(STMP3XXX_REGS_BASE + 0x38000)
+#define REGS_TVENC_PHYS	0x80038000
+#define REGS_TVENC_SIZE	0x2000
+
+#define HW_TVENC_CTRL		0x0
+#define BM_TVENC_CTRL_CLKGATE	0x40000000
+#define BM_TVENC_CTRL_SFTRST	0x80000000
+
+#define HW_TVENC_CONFIG		0x10
+#define BM_TVENC_CONFIG_ENCD_MODE	0x00000007
+#define BP_TVENC_CONFIG_ENCD_MODE	0
+#define BM_TVENC_CONFIG_SYNC_MODE	0x00000070
+#define BP_TVENC_CONFIG_SYNC_MODE	4
+#define BM_TVENC_CONFIG_FSYNC_PHS	0x00000200
+#define BM_TVENC_CONFIG_CGAIN	0x0000C000
+#define BP_TVENC_CONFIG_CGAIN	14
+#define BM_TVENC_CONFIG_YGAIN_SEL	0x00030000
+#define BP_TVENC_CONFIG_YGAIN_SEL	16
+#define BM_TVENC_CONFIG_PAL_SHAPE	0x00100000
+
+#define HW_TVENC_SYNCOFFSET	0x30
+
+#define HW_TVENC_COLORSUB0	0xC0
+
+#define HW_TVENC_COLORBURST	0x140
+#define BM_TVENC_COLORBURST_PBA	0x00FF0000
+#define BP_TVENC_COLORBURST_PBA	16
+#define BM_TVENC_COLORBURST_NBA	0xFF000000
+#define BP_TVENC_COLORBURST_NBA	24
+
+#define HW_TVENC_MACROVISION0	0x150
+
+#define HW_TVENC_MACROVISION1	0x160
+
+#define HW_TVENC_MACROVISION2	0x170
+
+#define HW_TVENC_MACROVISION3	0x180
+
+#define HW_TVENC_MACROVISION4	0x190
+
+#define HW_TVENC_DACCTRL	0x1A0
+#define BM_TVENC_DACCTRL_RVAL	0x00000070
+#define BP_TVENC_DACCTRL_RVAL	4
+#define BM_TVENC_DACCTRL_DUMP_TOVDD1	0x00000100
+#define BM_TVENC_DACCTRL_PWRUP1	0x00001000
+#define BM_TVENC_DACCTRL_GAINUP	0x00040000
+#define BM_TVENC_DACCTRL_GAINDN	0x00080000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
new file mode 100644
index 00000000000..a251e68bb3a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP1_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP2_BASE	(STMP3XXX_REGS_BASE + 0x6E000)
+#define REGS_UARTAPP2_PHYS	0x8006E000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
new file mode 100644
index 00000000000..b810deb552a
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS	0x80070000
+#define REGS_UARTDBG_SIZE	0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE      16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED      12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v)  \
+	(((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA      0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v)  \
+	(((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC      4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v)  \
+	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE      16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED      9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v)  \
+	(((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE      8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR      0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v)  \
+	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE      16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT      0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
+	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE      8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED      6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
+	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE      16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED      8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v)  \
+	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN      5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v)  \
+	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE      16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED      3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE      16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED      6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL      3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
+	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
+#define BP_UARTDBGIFLS_TXIFLSEL      0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
+	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE      16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED      11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE      16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED      11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE      16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED      11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE      16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED      11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE      16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED      3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
new file mode 100644
index 00000000000..25112c1aa60
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: USBCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
+#define REGS_USBCTRL_SIZE	0x2000
+
+#define HW_USBCTRL_USBCMD	0x140
+#define BM_USBCTRL_USBCMD_RS	0x00000001
+#define BP_USBCTRL_USBCMD_RS	0
+#define BM_USBCTRL_USBCMD_RST	0x00000002
+
+#define HW_USBCTRL_USBINTR	0x148
+#define BM_USBCTRL_USBINTR_UE	0x00000001
+#define BP_USBCTRL_USBINTR_UE	0
+
+#define HW_USBCTRL_PORTSC1	0x184
+#define BM_USBCTRL_PORTSC1_PHCD	0x00800000
+
+#define HW_USBCTRL_OTGSC	0x1A4
+#define BM_USBCTRL_OTGSC_ID	0x00000100
+#define BM_USBCTRL_OTGSC_IDIS	0x00010000
+#define BM_USBCTRL_OTGSC_IDIE	0x01000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
new file mode 100644
index 00000000000..11f3b732dc9
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp378x: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+#define REGS_USBPHY_PHYS	0x8007C000
+#define REGS_USBPHY_SIZE	0x2000
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c
new file mode 100644
index 00000000000..ddd49a760fd
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.c
@@ -0,0 +1,299 @@
+/*
+ * Freescale STMP378X platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/dma.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/system.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-pxp.h>
+#include <mach/regs-i2c.h>
+
+#include "stmp378x.h"
+/*
+ * IRQ handling
+ */
+static void stmp378x_ack_irq(unsigned int irq)
+{
+	/* Tell ICOLL to release IRQ line */
+	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+	/* ACK current interrupt */
+	__raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
+			REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp378x_mask_irq(unsigned int irq)
+{
+	/* IRQ disable */
+	stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
+			REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static void stmp378x_unmask_irq(unsigned int irq)
+{
+	/* IRQ enable */
+	stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
+		      REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static struct irq_chip stmp378x_chip = {
+	.ack	= stmp378x_ack_irq,
+	.mask	= stmp378x_mask_irq,
+	.unmask = stmp378x_unmask_irq,
+};
+
+void __init stmp378x_init_irq(void)
+{
+	stmp3xxx_init_irq(&stmp378x_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+	void __iomem *c1, *c2;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+		break;
+
+	default:
+		return;
+	}
+	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
+	stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+	void __iomem *c1, *c2;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+		c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+		c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+		break;
+
+	default:
+		return;
+	}
+	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
+	stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+	int r = 0;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	void __iomem *c0;
+	u32 mask;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
+		mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
+		break;
+	case STMP3XXX_BUS_APBX:
+		c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
+		mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
+		break;
+	default:
+		return;
+	}
+
+	/* Reset channel and wait for it to complete */
+	stmp3xxx_setl(mask, c0);
+	while (__raw_readl(c0) & mask)
+		cpu_relax();
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	u32 mask = 1 << chbit;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+	u32 mask = 1 << chbit;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical      Physical
+ * f0000000	80000000	On-chip registers
+ * f1000000	00000000	32k on-chip SRAM
+ */
+
+static struct map_desc stmp378x_io_desc[] __initdata = {
+	{
+		.virtual	= (u32)STMP3XXX_REGS_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+		.length		= STMP3XXX_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+		.length		= STMP3XXX_OCRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+/*
+ * devices that are present only on stmp378x, not on all 3xxx boards:
+ * 	PxP
+ * 	I2C
+ */
+static struct resource pxp_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_PXP_PHYS,
+		.end	= REGS_PXP_PHYS + REGS_PXP_SIZE,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_PXP,
+		.end	= IRQ_PXP,
+	},
+};
+
+struct platform_device stmp378x_pxp = {
+	.name		= "stmp3xxx-pxp",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxp_resource),
+	.resource	= pxp_resource,
+};
+
+static struct resource i2c_resources[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_I2C_ERROR,
+		.end = IRQ_I2C_ERROR,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = REGS_I2C_PHYS,
+		.end = REGS_I2C_PHYS + REGS_I2C_SIZE,
+	}, {
+		.flags = IORESOURCE_DMA,
+		.start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+	},
+};
+
+struct platform_device stmp378x_i2c = {
+	.name = "i2c_stmp3xxx",
+	.id = 0,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = i2c_resources,
+	.num_resources = ARRAY_SIZE(i2c_resources),
+};
+
+void __init stmp378x_map_io(void)
+{
+	iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
+}
diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h
new file mode 100644
index 00000000000..0dc15b3c891
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.h
@@ -0,0 +1,25 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP378X_H
+#define __MACH_STMP378X_H
+
+void stmp378x_map_io(void);
+void stmp378x_init_irq(void);
+
+extern struct platform_device stmp378x_pxp, stmp378x_i2c;
+#endif /* __MACH_STMP378X_COMMON_H */
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
new file mode 100644
index 00000000000..90d8fe6f10f
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x_devb.c
@@ -0,0 +1,334 @@
+/*
+ * Freescale STMP378X development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/mmc.h>
+#include <mach/gpmi.h>
+
+#include "stmp378x.h"
+
+static struct platform_device *devices[] = {
+	&stmp3xxx_dbguart,
+	&stmp3xxx_appuart,
+	&stmp3xxx_watchdog,
+	&stmp3xxx_touchscreen,
+	&stmp3xxx_rtc,
+	&stmp3xxx_keyboard,
+	&stmp3xxx_framebuffer,
+	&stmp3xxx_backlight,
+	&stmp3xxx_rotdec,
+	&stmp3xxx_persistent,
+	&stmp3xxx_dcp_bootstream,
+	&stmp3xxx_dcp,
+	&stmp3xxx_battery,
+	&stmp378x_pxp,
+	&stmp378x_i2c,
+};
+
+static struct pin_desc i2c_pins_desc[] = {
+	{ PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group i2c_pins = {
+	.pins		= i2c_pins_desc,
+	.nr_pins	= ARRAY_SIZE(i2c_pins_desc),
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+	{ PINID_PWM0, PIN_FUN3, },
+	{ PINID_PWM1, PIN_FUN3, },
+};
+
+static struct pin_group dbguart_pins[] = {
+	[0] = {
+		.pins		= dbguart_pins_0,
+		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
+	},
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+	int r = 0;
+
+	if (request)
+		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+	else
+		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+	return r;
+}
+
+static struct pin_desc appuart_pins_0[] = {
+	{ PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_desc appuart_pins_1[] = {
+#if 0 /* enable these when second appuart will be connected */
+	{ PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+#endif
+};
+
+static struct pin_desc mmc_pins_desc[] = {
+	{ PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+	{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+	{ PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group mmc_pins = {
+	.pins		= mmc_pins_desc,
+	.nr_pins	= ARRAY_SIZE(mmc_pins_desc),
+};
+
+static int stmp3xxxmmc_get_wp(void)
+{
+	return gpio_get_value(PINID_PWM4);
+}
+
+static int stmp3xxxmmc_hw_init_ssp1(void)
+{
+	int ret;
+
+	ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
+	if (ret)
+		goto out;
+
+	/* Configure write protect GPIO pin */
+	ret = gpio_request(PINID_PWM4, "mmc wp");
+	if (ret)
+		goto out_wp;
+
+	gpio_direction_input(PINID_PWM4);
+
+	/* Configure POWER pin as gpio to drive power to MMC slot */
+	ret = gpio_request(PINID_PWM3, "mmc power");
+	if (ret)
+		goto out_power;
+
+	gpio_direction_output(PINID_PWM3, 0);
+	mdelay(100);
+
+	return 0;
+
+out_power:
+	gpio_free(PINID_PWM4);
+out_wp:
+	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+out:
+	return ret;
+}
+
+static void stmp3xxxmmc_hw_release_ssp1(void)
+{
+	gpio_free(PINID_PWM3);
+	gpio_free(PINID_PWM4);
+	stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+}
+
+static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
+{
+	stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
+}
+
+static unsigned long
+stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
+{
+	struct clk *ssp, *parent;
+	char *p;
+	long r;
+
+	ssp = clk_get(NULL, "ssp");
+
+	/* using SSP1, no timeout, clock rate 1 */
+	writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
+	       BF(0xFFFF, SSP_TIMING_TIMEOUT),
+	       base + HW_SSP_TIMING);
+
+	p = (hz > 1000000) ? "io" : "osc_24M";
+	parent = clk_get(NULL, p);
+	clk_set_parent(ssp, parent);
+	r = clk_set_rate(ssp, 2 * hz / 1000);
+	clk_put(parent);
+	clk_put(ssp);
+
+	return hz;
+}
+
+static struct stmp3xxxmmc_platform_data mmc_data = {
+	.hw_init	= stmp3xxxmmc_hw_init_ssp1,
+	.hw_release	= stmp3xxxmmc_hw_release_ssp1,
+	.get_wp		= stmp3xxxmmc_get_wp,
+	.cmd_pullup	= stmp3xxxmmc_cmd_pullup_ssp1,
+	.setclock	= stmp3xxxmmc_setclock_ssp1,
+};
+
+
+static struct pin_group appuart_pins[] = {
+	[0] = {
+		.pins		= appuart_pins_0,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
+	},
+	[1] = {
+		.pins		= appuart_pins_1,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_1),
+	},
+};
+
+static struct pin_desc ssp1_pins_desc[] = {
+	{ PINID_SSP1_SCK,	PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_CMD,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_DATA0,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_SSP1_DATA3,	PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_desc ssp2_pins_desc[] = {
+	{ PINID_GPMI_WRN,	PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_RDY1,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_D00,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+	{ PINID_GPMI_D03,	PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_group ssp1_pins = {
+	.pins = ssp1_pins_desc,
+	.nr_pins = ARRAY_SIZE(ssp1_pins_desc),
+};
+
+static struct pin_group ssp2_pins = {
+	.pins = ssp1_pins_desc,
+	.nr_pins = ARRAY_SIZE(ssp2_pins_desc),
+};
+
+static struct pin_desc gpmi_pins_desc[] = {
+	{ PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+	{ PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group gpmi_pins = {
+	.pins		= gpmi_pins_desc,
+	.nr_pins	= ARRAY_SIZE(gpmi_pins_desc),
+};
+
+static struct mtd_partition gpmi_partitions[] = {
+	[0] = {
+		.name	= "boot",
+		.size	= 10 * SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "data",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct gpmi_platform_data gpmi_data = {
+	.pins = &gpmi_pins,
+	.nr_parts = ARRAY_SIZE(gpmi_partitions),
+	.parts = gpmi_partitions,
+	.part_types = { "cmdline", NULL },
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+	{
+		.modalias       = "enc28j60",
+		.max_speed_hz   = 6 * 1000 * 1000,
+		.bus_num	= 1,
+		.chip_select    = 0,
+		.platform_data  = NULL,
+	},
+#endif
+};
+
+static void __init stmp378x_devb_init(void)
+{
+	stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+	/* init stmp3xxx platform */
+	stmp3xxx_init();
+
+	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+	stmp3xxx_appuart.dev.platform_data = appuart_pins;
+	stmp3xxx_mmc.dev.platform_data = &mmc_data;
+	stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
+	stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
+	stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
+	stmp378x_i2c.dev.platform_data = &i2c_pins;
+
+	/* register spi devices */
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	/* add board's devices */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* add devices selected by command line ssp1= and ssp2= options */
+	stmp3xxx_ssp1_device_register();
+	stmp3xxx_ssp2_device_register();
+}
+
+MACHINE_START(STMP378X, "STMP378X")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= stmp378x_map_io,
+	.init_irq	= stmp378x_init_irq,
+	.timer		= &stmp3xxx_timer,
+	.init_machine	= stmp378x_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile
new file mode 100644
index 00000000000..57deffd09fb
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
+obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o
diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot
new file mode 100644
index 00000000000..1568ad404d5
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
+initrd_phys-y	:= 0x40800000
diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..fed2787b6c3
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP37XX
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	        mov	\base, #0xf0000000	@ vm address of IRQ controller
+		ldr	\irqnr, [\base, #0x30]	@ HW_ICOLL_STAT
+		cmp	\irqnr, #0x3f
+		movne	\irqstat, #0		@ Ack this IRQ
+		strne	\irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR
+		moveqs	\irqnr, #0		@ Zero flag set for no IRQ
+
+		.endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h
new file mode 100644
index 00000000000..98f12938550
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/irqs.h
@@ -0,0 +1,99 @@
+/*
+ * Freescale STMP37XX interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef _ASM_ARCH_IRQS_H
+#define _ASM_ARCH_IRQS_H
+
+#define IRQ_DEBUG_UART	         0
+#define IRQ_COMMS_RX	           1
+#define IRQ_COMMS_TX	           1
+#define IRQ_SSP2_ERROR	         2
+#define IRQ_VDD5V	              3
+#define IRQ_HEADPHONE_SHORT	    4
+#define IRQ_DAC_DMA	            5
+#define IRQ_DAC_ERROR	          6
+#define IRQ_ADC_DMA	            7
+#define IRQ_ADC_ERROR	          8
+#define IRQ_SPDIF_DMA	          9
+#define IRQ_SAIF2_DMA	          9
+#define IRQ_SPDIF_ERROR	        10
+#define IRQ_SAIF1_IRQ	          10
+#define IRQ_SAIF2_IRQ	          10
+#define IRQ_USB_CTRL	           11
+#define IRQ_USB_WAKEUP	         12
+#define IRQ_GPMI_DMA	           13
+#define IRQ_SSP1_DMA	           14
+#define IRQ_SSP_ERROR	          15
+#define IRQ_GPIO0	              16
+#define IRQ_GPIO1	              17
+#define IRQ_GPIO2	              18
+#define IRQ_SAIF1_DMA	          19
+#define IRQ_SSP2_DMA	           20
+#define IRQ_ECC8_IRQ	           21
+#define IRQ_RTC_ALARM	          22
+#define IRQ_UARTAPP_TX_DMA	     23
+#define IRQ_UARTAPP_INTERNAL	   24
+#define IRQ_UARTAPP_RX_DMA	     25
+#define IRQ_I2C_DMA	            26
+#define IRQ_I2C_ERROR	          27
+#define IRQ_TIMER0	             28
+#define IRQ_TIMER1	             29
+#define IRQ_TIMER2	             30
+#define IRQ_TIMER3	             31
+#define IRQ_BATT_BRNOUT	        32
+#define IRQ_VDDD_BRNOUT	        33
+#define IRQ_VDDIO_BRNOUT	       34
+#define IRQ_VDD18_BRNOUT	       35
+#define IRQ_TOUCH_DETECT	       36
+#define IRQ_LRADC_CH0	          37
+#define IRQ_LRADC_CH1	          38
+#define IRQ_LRADC_CH2	          39
+#define IRQ_LRADC_CH3	          40
+#define IRQ_LRADC_CH4	          41
+#define IRQ_LRADC_CH5	          42
+#define IRQ_LRADC_CH6	          43
+#define IRQ_LRADC_CH7	          44
+#define IRQ_LCDIF_DMA	          45
+#define IRQ_LCDIF_ERROR	        46
+#define IRQ_DIGCTL_DEBUG_TRAP	  47
+#define IRQ_RTC_1MSEC	          48
+#define IRQ_DRI_DMA	            49
+#define IRQ_DRI_ATTENTION	      50
+#define IRQ_GPMI_ATTENTION	     51
+#define IRQ_IR	                 52
+#define IRQ_DCP_VMI	            53
+#define IRQ_DCP	                54
+#define IRQ_RESERVED_55	        55
+#define IRQ_RESERVED_56	        56
+#define IRQ_RESERVED_57	        57
+#define IRQ_RESERVED_58	        58
+#define IRQ_RESERVED_59	        59
+#define SW_IRQ_60	              60
+#define SW_IRQ_61	              61
+#define SW_IRQ_62	              62
+#define SW_IRQ_63	              63
+
+#define NR_REAL_IRQS		64
+#define NR_IRQS			(NR_REAL_IRQS + 32 * 3)
+
+/* TIMER and BRNOUT are FIQ capable */
+#define FIQ_START			IRQ_TIMER0
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK		IRQ_GPMI_ATTENTION
+
+#endif /* _ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h
new file mode 100644
index 00000000000..d56de0c471d
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/pins.h
@@ -0,0 +1,147 @@
+/*
+ * Freescale STMP37XX SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware
+ * interface  this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00		STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01		STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02		STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03		STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04		STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05		STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06		STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07		STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08		STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09		STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10		STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11		STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12		STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13		STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14		STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15		STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_A0		STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_A1		STMP3XXX_PINID(0, 17)
+#define PINID_GPMI_A2		STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0		STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY2		STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY3		STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RESETN	STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_IRQ		STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN		STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN		STMP3XXX_PINID(0, 25)
+#define PINID_UART2_CTS		STMP3XXX_PINID(0, 26)
+#define PINID_UART2_RTS		STMP3XXX_PINID(0, 27)
+#define PINID_UART2_RX		STMP3XXX_PINID(0, 28)
+#define PINID_UART2_TX		STMP3XXX_PINID(0, 29)
+
+/* Bank 1 */
+#define PINID_LCD_D00		STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01		STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02		STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03		STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04		STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05		STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06		STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07		STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08		STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09		STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10		STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11		STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12		STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13		STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14		STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15		STMP3XXX_PINID(1, 15)
+#define PINID_LCD_RESET 	STMP3XXX_PINID(1, 16)
+#define PINID_LCD_RS		STMP3XXX_PINID(1, 17)
+#define PINID_LCD_WR_RWN	STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RD_E		STMP3XXX_PINID(1, 19)
+#define PINID_LCD_CS		STMP3XXX_PINID(1, 20)
+#define PINID_LCD_BUSY		STMP3XXX_PINID(1, 21)
+#define PINID_SSP1_CMD		STMP3XXX_PINID(1, 22)
+#define PINID_SSP1_SCK		STMP3XXX_PINID(1, 23)
+#define PINID_SSP1_DATA0	STMP3XXX_PINID(1, 24)
+#define PINID_SSP1_DATA1	STMP3XXX_PINID(1, 25)
+#define PINID_SSP1_DATA2	STMP3XXX_PINID(1, 26)
+#define PINID_SSP1_DATA3	STMP3XXX_PINID(1, 27)
+#define PINID_SSP1_DETECT	STMP3XXX_PINID(1, 28)
+
+/* Bank 2 */
+#define PINID_PWM0		STMP3XXX_PINID(2, 0)
+#define PINID_PWM1		STMP3XXX_PINID(2, 1)
+#define PINID_PWM2		STMP3XXX_PINID(2, 2)
+#define PINID_PWM3		STMP3XXX_PINID(2, 3)
+#define PINID_PWM4		STMP3XXX_PINID(2, 4)
+#define PINID_I2C_SCL		STMP3XXX_PINID(2, 5)
+#define PINID_I2C_SDA		STMP3XXX_PINID(2, 6)
+#define PINID_ROTTARYA		STMP3XXX_PINID(2, 7)
+#define PINID_ROTTARYB		STMP3XXX_PINID(2, 8)
+#define PINID_EMI_CKE		STMP3XXX_PINID(2, 9)
+#define PINID_EMI_RASN		STMP3XXX_PINID(2, 10)
+#define PINID_EMI_CASN		STMP3XXX_PINID(2, 11)
+#define PINID_EMI_CE0N		STMP3XXX_PINID(2, 12)
+#define PINID_EMI_CE1N		STMP3XXX_PINID(2, 13)
+#define PINID_EMI_CE2N		STMP3XXX_PINID(2, 14)
+#define PINID_EMI_CE3N		STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A00		STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A01		STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A02		STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A03		STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A04		STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A05		STMP3XXX_PINID(2, 21)
+#define PINID_EMI_A06		STMP3XXX_PINID(2, 22)
+#define PINID_EMI_A07		STMP3XXX_PINID(2, 23)
+#define PINID_EMI_A08		STMP3XXX_PINID(2, 24)
+#define PINID_EMI_A09		STMP3XXX_PINID(2, 25)
+#define PINID_EMI_A10		STMP3XXX_PINID(2, 26)
+#define PINID_EMI_A11		STMP3XXX_PINID(2, 27)
+#define PINID_EMI_A12		STMP3XXX_PINID(2, 28)
+#define PINID_EMI_A13		STMP3XXX_PINID(2, 29)
+#define PINID_EMI_A14		STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN		STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00		STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01		STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02		STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03		STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04		STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05		STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06		STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07		STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08		STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09		STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10		STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11		STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12		STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13		STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14		STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15		STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQS0		STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQS1		STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQM0		STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQM1		STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK		STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN		STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
new file mode 100644
index 00000000000..a323aa9a21f
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE	(STMP3XXX_REGS_BASE + 0x4000)
+
+#define HW_APBH_CTRL0		0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL	16
+#define BM_APBH_CTRL0_CLKGATE	0x40000000
+#define BM_APBH_CTRL0_SFTRST	0x80000000
+
+#define HW_APBH_CTRL1		0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ	0
+
+#define HW_APBH_DEVSEL		0x20
+
+#define HW_APBH_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR	0x50
+
+#define BM_APBH_CHn_CMD_MODE		0x00000003
+#define BP_APBH_CHn_CMD_MODE		0x00000001
+#define BV_APBH_CHn_CMD_MODE_NOOP		 0
+#define BV_APBH_CHn_CMD_MODE_WRITE		 1
+#define BV_APBH_CHn_CMD_MODE_READ		 2
+#define BV_APBH_CHn_CMD_MODE_SENSE		 3
+#define BM_APBH_CHn_CMD_CHAIN		0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK	0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY	0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS	12
+#define BM_APBH_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBH_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA	0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBH_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
new file mode 100644
index 00000000000..6d080cd5b70
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
@@ -0,0 +1,113 @@
+/*
+ * stmp37xx: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE	(STMP3XXX_REGS_BASE + 0x24000)
+
+#define HW_APBX_CTRL0		0x0
+#define BM_APBX_CTRL0_RESET_CHANNEL	0x00FF0000
+#define BP_APBX_CTRL0_RESET_CHANNEL	16
+#define BM_APBX_CTRL0_CLKGATE	0x40000000
+#define BM_APBX_CTRL0_SFTRST	0x80000000
+
+#define HW_APBX_CTRL1		0x10
+
+#define HW_APBX_DEVSEL		0x20
+
+#define HW_APBX_CH0_NXTCMDAR	(0x50 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR	(0x50 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR	(0x50 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR	(0x50 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR	(0x50 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR	(0x50 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR	(0x50 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR	(0x50 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR	(0x50 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR	(0x50 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR	(0x50 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR	(0x50 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR	(0x50 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR	(0x50 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR	(0x50 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR	(0x50 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR	0x50
+#define BM_APBX_CHn_CMD_MODE		0x00000003
+#define BP_APBX_CHn_CMD_MODE		0x00000001
+#define BV_APBX_CHn_CMD_MODE_NOOP		 0
+#define BV_APBX_CHn_CMD_MODE_WRITE		 1
+#define BV_APBX_CHn_CMD_MODE_READ		 2
+#define BV_APBX_CHn_CMD_MODE_SENSE		 3
+#define BM_APBX_CHn_CMD_COMMAND	0x00000003
+#define BP_APBX_CHn_CMD_COMMAND	0
+#define BM_APBX_CHn_CMD_CHAIN	0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT	0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE	0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD	0x00000080
+#define BM_APBX_CHn_CMD_CMDWORDS	0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS	12
+#define BM_APBX_CHn_CMD_XFER_COUNT	0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT	16
+
+#define HW_APBX_CH0_BAR		(0x70 + 0 * 0x70)
+#define HW_APBX_CH1_BAR		(0x70 + 1 * 0x70)
+#define HW_APBX_CH2_BAR		(0x70 + 2 * 0x70)
+#define HW_APBX_CH3_BAR		(0x70 + 3 * 0x70)
+#define HW_APBX_CH4_BAR		(0x70 + 4 * 0x70)
+#define HW_APBX_CH5_BAR		(0x70 + 5 * 0x70)
+#define HW_APBX_CH6_BAR		(0x70 + 6 * 0x70)
+#define HW_APBX_CH7_BAR		(0x70 + 7 * 0x70)
+#define HW_APBX_CH8_BAR		(0x70 + 8 * 0x70)
+#define HW_APBX_CH9_BAR		(0x70 + 9 * 0x70)
+#define HW_APBX_CH10_BAR		(0x70 + 10 * 0x70)
+#define HW_APBX_CH11_BAR		(0x70 + 11 * 0x70)
+#define HW_APBX_CH12_BAR		(0x70 + 12 * 0x70)
+#define HW_APBX_CH13_BAR		(0x70 + 13 * 0x70)
+#define HW_APBX_CH14_BAR		(0x70 + 14 * 0x70)
+#define HW_APBX_CH15_BAR		(0x70 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR		0x70
+
+#define HW_APBX_CH0_SEMA	(0x80 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA	(0x80 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA	(0x80 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA	(0x80 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA	(0x80 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA	(0x80 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA	(0x80 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA	(0x80 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA	(0x80 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA	(0x80 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA	(0x80 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA	(0x80 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA	(0x80 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA	(0x80 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA	(0x80 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA	(0x80 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA	0x80
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA	0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA	0
+#define BM_APBX_CHn_SEMA_PHORE	0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE	16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
new file mode 100644
index 00000000000..3b511f947a5
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
@@ -0,0 +1,61 @@
+/*
+ * stmp37xx: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE	(STMP3XXX_REGS_BASE + 0x4C000)
+
+#define HW_AUDIOIN_CTRL		0x0
+#define BM_AUDIOIN_CTRL_RUN	0x00000001
+#define BP_AUDIOIN_CTRL_RUN	0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH	0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOIN_STAT		0x10
+
+#define HW_AUDIOIN_ADCSRR	0x20
+
+#define HW_AUDIOIN_ADCVOLUME	0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT	0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT	0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT	16
+
+#define HW_AUDIOIN_ADCDEBUG	0x40
+
+#define HW_AUDIOIN_ADCVOL	0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT	0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT	0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT	0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT	4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT	0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT	8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT	0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT	12
+#define BM_AUDIOIN_ADCVOL_MUTE	0x01000000
+
+#define HW_AUDIOIN_MICLINE	0x60
+
+#define HW_AUDIOIN_ANACLKCTRL	0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOIN_DATA		0x80
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
new file mode 100644
index 00000000000..ca1942b8a3e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
@@ -0,0 +1,111 @@
+/*
+ * stmp37xx: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE	(STMP3XXX_REGS_BASE + 0x48000)
+
+#define HW_AUDIOOUT_CTRL	0x0
+#define BM_AUDIOOUT_CTRL_RUN	0x00000001
+#define BP_AUDIOOUT_CTRL_RUN	0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN	0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ	0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ	0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH	0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE	0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST	0x80000000
+
+#define HW_AUDIOOUT_STAT	0x10
+
+#define HW_AUDIOOUT_DACSRR	0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC	0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC	0
+#define BM_AUDIOOUT_DACSRR_SRC_INT	0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT	16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD	0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD	24
+#define BM_AUDIOOUT_DACSRR_BASEMULT	0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT	28
+
+#define HW_AUDIOOUT_DACVOLUME	0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT	0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT	0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG	0x40
+
+#define HW_AUDIOOUT_HPVOL	0x50
+#define BM_AUDIOOUT_HPVOL_MUTE	0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD	0x02000000
+
+#define HW_AUDIOOUT_PWRDN	0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE	0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE	0
+#define BM_AUDIOOUT_PWRDN_CAPLESS	0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC	0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC	0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC	0x00010000
+#define BM_AUDIOOUT_PWRDN_LINEOUT	0x01000000
+
+#define HW_AUDIOOUT_REFCTRL	0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL	0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL	4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL	0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL	8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG	0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC	0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL	0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL	16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR	0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ	0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ	20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS	0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF	0x02000000
+
+#define HW_AUDIOOUT_ANACTRL	0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB	0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND	0x00000020
+
+#define HW_AUDIOOUT_TEST	0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ	0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ	22
+
+#define HW_AUDIOOUT_BISTCTRL	0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0	0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1	0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL	0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE	0x80000000
+
+#define HW_AUDIOOUT_DATA	0xF0
+
+#define HW_AUDIOOUT_LINEOUTCTRL	0x100
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT	0x0000001F
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT	0
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT	0x00001F00
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT	8
+#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP	0x00007000
+#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP	12
+#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL	0x00F00000
+#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL	20
+#define BM_AUDIOOUT_LINEOUTCTRL_MUTE	0x01000000
+#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD	0x02000000
+
+#define HW_AUDIOOUT_VERSION	0x200
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
new file mode 100644
index 00000000000..47f5c92fdaf
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
@@ -0,0 +1,72 @@
+/*
+ * stmp37xx: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE	(STMP3XXX_REGS_BASE + 0x40000)
+
+#define HW_CLKCTRL_PLLCTRL0	0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+
+#define HW_CLKCTRL_CPU		0x20
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+
+#define HW_CLKCTRL_HBUS		0x30
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BP_CLKCTRL_HBUS_DIV	0
+
+#define HW_CLKCTRL_XBUS		0x40
+
+#define HW_CLKCTRL_XTAL		0x50
+
+#define HW_CLKCTRL_PIX		0x60
+#define BM_CLKCTRL_PIX_DIV	0x00007FFF
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+
+#define HW_CLKCTRL_SSP		0x70
+
+#define HW_CLKCTRL_GPMI		0x80
+
+#define HW_CLKCTRL_SPDIF	0x90
+
+#define HW_CLKCTRL_EMI		0xA0
+
+#define HW_CLKCTRL_IR		0xB0
+
+#define HW_CLKCTRL_SAIF		0xC0
+
+#define HW_CLKCTRL_FRAC		0xD0
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+
+#define HW_CLKCTRL_CLKSEQ	0xE0
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+
+#define HW_CLKCTRL_RESET	0xF0
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+#define BP_CLKCTRL_RESET_DIG	0
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
new file mode 100644
index 00000000000..ba1bbe265c2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
@@ -0,0 +1,24 @@
+/*
+ * stmp37xx: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE	(STMP3XXX_REGS_BASE + 0x1C000)
+
+#define HW_DIGCTL_CTRL		0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE	0x00000004
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
new file mode 100644
index 00000000000..3b6d990a3af
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_ECC8_BASE	(STMP3XXX_REGS_BASE + 0x8000)
+
+#define HW_ECC8_CTRL		0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ	0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ	0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN	0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST	0x20000000
+
+#define HW_ECC8_STATUS0		0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE	0x00000004
+#define BM_ECC8_STATUS0_CORRECTED	0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX	0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX	8
+#define BM_ECC8_STATUS0_COMPLETED_CE	0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE	16
+
+#define HW_ECC8_STATUS1		0x20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
new file mode 100644
index 00000000000..f2b304f5449
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
@@ -0,0 +1,63 @@
+/*
+ * stmp37xx: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_GPMI_BASE	(STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS	0x8000C000
+#define REGS_GPMI_SIZE	0x2000
+
+#define HW_GPMI_CTRL0		0x0
+#define BM_GPMI_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT	0
+#define BM_GPMI_CTRL0_CS	0x00300000
+#define BP_GPMI_CTRL0_CS	20
+#define BM_GPMI_CTRL0_LOCK_CS	0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH	0x00800000
+#define BM_GPMI_CTRL0_COMMAND_MODE	0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE	24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE	    0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ	     0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY   0x3
+#define BM_GPMI_CTRL0_RUN	0x20000000
+#define BM_GPMI_CTRL0_CLKGATE	0x40000000
+#define BM_GPMI_CTRL0_SFTRST	0x80000000
+#define BM_GPMI_ECCCTRL_ENABLE_ECC	0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD	0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD	13
+
+#define HW_GPMI_CTRL1		0x60
+#define BM_GPMI_CTRL1_GPMI_MODE	0x00000003
+#define BP_GPMI_CTRL1_GPMI_MODE	0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY	0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET	0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ	0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ	0x00000400
+#define BM_GPMI_CTRL1_DSAMPLE_TIME	0x00007000
+#define BP_GPMI_CTRL1_DSAMPLE_TIME	12
+
+#define HW_GPMI_TIMING0		0x70
+#define BM_GPMI_TIMING0_DATA_SETUP	0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP	0
+#define BM_GPMI_TIMING0_DATA_HOLD	0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD	8
+
+#define HW_GPMI_TIMING1		0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT	16
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..35882a9b8bc
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp37xx: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_I2C_BASE	(STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS	0x80058000
+#define REGS_I2C_SIZE	0x2000
+
+#define HW_I2C_CTRL0		0x0
+#define BM_I2C_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT	0
+#define BM_I2C_CTRL0_DIRECTION	0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE	0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START	0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP	0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK	0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST	0x02000000
+#define BM_I2C_CTRL0_CLKGATE	0x40000000
+#define BM_I2C_CTRL0_SFTRST	0x80000000
+
+#define HW_I2C_TIMING0		0x10
+
+#define HW_I2C_TIMING1		0x20
+
+#define HW_I2C_TIMING2		0x30
+
+#define HW_I2C_CTRL1		0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ	0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ	0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ	0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ	0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ	0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ	0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ	0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ	0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ	0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK	0x10000000
+
+#define HW_I2C_VERSION		0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
new file mode 100644
index 00000000000..3b7c92239e2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
@@ -0,0 +1,43 @@
+/*
+ * stmp37xx: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE	(STMP3XXX_REGS_BASE + 0x0)
+
+#define HW_ICOLL_VECTOR		0x0
+
+#define HW_ICOLL_LEVELACK	0x10
+
+#define HW_ICOLL_CTRL		0x20
+#define BM_ICOLL_CTRL_CLKGATE	0x40000000
+#define BM_ICOLL_CTRL_SFTRST	0x80000000
+
+#define HW_ICOLL_STAT		0x30
+
+#define HW_ICOLL_PRIORITY0	(0x60 + 0 * 0x10)
+#define HW_ICOLL_PRIORITY1	(0x60 + 1 * 0x10)
+#define HW_ICOLL_PRIORITY2	(0x60 + 2 * 0x10)
+#define HW_ICOLL_PRIORITY3	(0x60 + 3 * 0x10)
+
+#define HW_ICOLL_PRIORITYn	0x60
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
new file mode 100644
index 00000000000..72514e8b073
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
@@ -0,0 +1,89 @@
+/*
+ * stmp37xx: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LCDIF_BASE	(STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS	0x80030000
+#define REGS_LCDIF_SIZE	0x2000
+
+#define HW_LCDIF_CTRL		0x0
+#define BM_LCDIF_CTRL_COUNT	0x0000FFFF
+#define BP_LCDIF_CTRL_COUNT	0
+#define BM_LCDIF_CTRL_RUN	0x00010000
+#define BM_LCDIF_CTRL_WORD_LENGTH	0x00020000
+#define BM_LCDIF_CTRL_DATA_SELECT	0x00040000
+#define BM_LCDIF_CTRL_DOTCLK_MODE	0x00080000
+#define BM_LCDIF_CTRL_VSYNC_MODE	0x00100000
+#define BM_LCDIF_CTRL_DATA_SWIZZLE	0x00600000
+#define BP_LCDIF_CTRL_DATA_SWIZZLE	21
+#define BM_LCDIF_CTRL_BYPASS_COUNT	0x00800000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS	0x06000000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS	25
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR	0x08000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE	0x10000000
+#define BM_LCDIF_CTRL_CLKGATE	0x40000000
+#define BM_LCDIF_CTRL_SFTRST	0x80000000
+
+#define HW_LCDIF_CTRL1		0x10
+#define BM_LCDIF_CTRL1_RESET	0x00000001
+#define BP_LCDIF_CTRL1_RESET	0
+#define BM_LCDIF_CTRL1_MODE86	0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE	0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ	0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ	0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ	0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ	0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN	0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT	0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT	16
+
+#define HW_LCDIF_TIMING		0x20
+
+#define HW_LCDIF_VDCTRL0	0x30
+#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT	0x000003FF
+#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT	0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL	0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL	0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL	0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL	0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT	0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB	0x20000000
+
+#define HW_LCDIF_VDCTRL1	0x40
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD	0x000FFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD	0
+#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH	0xFFF00000
+#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH	20
+
+#define HW_LCDIF_VDCTRL2	0x50
+#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT	0x000007FF
+#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT	0
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD	0x007FF800
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD	11
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	0xFF800000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH	23
+
+#define HW_LCDIF_VDCTRL3	0x60
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0x000001FF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT	0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	0x00FFF000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT	12
+#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON	0x01000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
new file mode 100644
index 00000000000..cc7b4702d1c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_LRADC_BASE	(STMP3XXX_REGS_BASE + 0x50000)
+
+#define HW_LRADC_CTRL0		0x0
+#define BM_LRADC_CTRL0_SCHEDULE	0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE	0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE	0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE	0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE	0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE	0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE	0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF	0x00200000
+#define BM_LRADC_CTRL0_CLKGATE	0x40000000
+#define BM_LRADC_CTRL0_SFTRST	0x80000000
+
+#define HW_LRADC_CTRL1		0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ	0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ	0
+#define BM_LRADC_CTRL1_LRADC5_IRQ	0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ	0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ	0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN	0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN	0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN	0x01000000
+
+#define HW_LRADC_CTRL2		0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS	0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS	16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT	0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE	0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO	0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO	24
+
+#define HW_LRADC_CTRL3		0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME	0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME	8
+
+#define HW_LRADC_STATUS		0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW	0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW	0
+
+#define HW_LRADC_CH0		(0x50 + 0 * 0x10)
+#define HW_LRADC_CH1		(0x50 + 1 * 0x10)
+#define HW_LRADC_CH2		(0x50 + 2 * 0x10)
+#define HW_LRADC_CH3		(0x50 + 3 * 0x10)
+#define HW_LRADC_CH4		(0x50 + 4 * 0x10)
+#define HW_LRADC_CH5		(0x50 + 5 * 0x10)
+#define HW_LRADC_CH6		(0x50 + 6 * 0x10)
+#define HW_LRADC_CH7		(0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn		0x50
+#define BM_LRADC_CHn_VALUE	0x0003FFFF
+#define BP_LRADC_CHn_VALUE	0
+#define BM_LRADC_CHn_NUM_SAMPLES	0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES	24
+#define BM_LRADC_CHn_ACCUMULATE	0x20000000
+
+#define HW_LRADC_DELAY0		(0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1		(0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2		(0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3		(0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn		0xD0
+#define BM_LRADC_DELAYn_DELAY	0x000007FF
+#define BP_LRADC_DELAYn_DELAY	0
+#define BM_LRADC_DELAYn_LOOP_COUNT	0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT	11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS	0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS	16
+#define BM_LRADC_DELAYn_KICK	0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS	0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS	24
+
+#define HW_LRADC_CTRL4		0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT	0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT	24
+#define BM_LRADC_CTRL4_LRADC7SELECT	0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT	28
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
new file mode 100644
index 00000000000..d5efce2388c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp37xx: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE	(STMP3XXX_REGS_BASE + 0x18000)
+
+#define HW_PINCTRL_MUXSEL0	0x100
+#define HW_PINCTRL_MUXSEL1	0x110
+#define HW_PINCTRL_MUXSEL2	0x120
+#define HW_PINCTRL_MUXSEL3	0x130
+#define HW_PINCTRL_MUXSEL4	0x140
+#define HW_PINCTRL_MUXSEL5	0x150
+#define HW_PINCTRL_MUXSEL6	0x160
+#define HW_PINCTRL_MUXSEL7	0x170
+
+#define HW_PINCTRL_DRIVE0	0x200
+#define HW_PINCTRL_DRIVE1	0x210
+#define HW_PINCTRL_DRIVE2	0x220
+#define HW_PINCTRL_DRIVE3	0x230
+#define HW_PINCTRL_DRIVE4	0x240
+#define HW_PINCTRL_DRIVE5	0x250
+#define HW_PINCTRL_DRIVE6	0x260
+#define HW_PINCTRL_DRIVE7	0x270
+#define HW_PINCTRL_DRIVE8	0x280
+#define HW_PINCTRL_DRIVE9	0x290
+#define HW_PINCTRL_DRIVE10	0x2A0
+#define HW_PINCTRL_DRIVE11	0x2B0
+#define HW_PINCTRL_DRIVE12	0x2C0
+#define HW_PINCTRL_DRIVE13	0x2D0
+#define HW_PINCTRL_DRIVE14	0x2E0
+
+#define HW_PINCTRL_PULL0	0x300
+#define HW_PINCTRL_PULL1	0x310
+#define HW_PINCTRL_PULL2	0x320
+#define HW_PINCTRL_PULL3	0x330
+
+#define HW_PINCTRL_DOUT0	0x400
+#define HW_PINCTRL_DOUT1	0x410
+#define HW_PINCTRL_DOUT2	0x420
+
+#define HW_PINCTRL_DIN0		0x500
+#define HW_PINCTRL_DIN1		0x510
+#define HW_PINCTRL_DIN2		0x520
+
+#define HW_PINCTRL_DOE0		0x600
+#define HW_PINCTRL_DOE1		0x610
+#define HW_PINCTRL_DOE2		0x620
+
+#define HW_PINCTRL_PIN2IRQ0	0x700
+#define HW_PINCTRL_PIN2IRQ1	0x710
+#define HW_PINCTRL_PIN2IRQ2	0x720
+
+#define HW_PINCTRL_IRQEN0	0x800
+#define HW_PINCTRL_IRQEN1	0x810
+#define HW_PINCTRL_IRQEN2	0x820
+
+#define HW_PINCTRL_IRQLEVEL0	0x900
+#define HW_PINCTRL_IRQLEVEL1	0x910
+#define HW_PINCTRL_IRQLEVEL2	0x920
+
+#define HW_PINCTRL_IRQPOL0	0xA00
+#define HW_PINCTRL_IRQPOL1	0xA10
+#define HW_PINCTRL_IRQPOL2	0xA20
+
+#define HW_PINCTRL_IRQSTAT0	0xB00
+#define HW_PINCTRL_IRQSTAT1	0xB10
+#define HW_PINCTRL_IRQSTAT2	0xB20
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
new file mode 100644
index 00000000000..0e733d74a22
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
@@ -0,0 +1,56 @@
+/*
+ * stmp37xx: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE	(STMP3XXX_REGS_BASE + 0x44000)
+
+#define HW_POWER_CTRL		0x0
+#define BM_POWER_CTRL_CLKGATE	0x40000000
+
+#define HW_POWER_5VCTRL		0x10
+
+#define HW_POWER_MINPWR		0x20
+
+#define HW_POWER_CHARGE		0x30
+
+#define HW_POWER_VDDDCTRL	0x40
+
+#define HW_POWER_VDDACTRL	0x50
+
+#define HW_POWER_VDDIOCTRL	0x60
+#define BM_POWER_VDDIOCTRL_TRG	0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG	0
+
+#define HW_POWER_STS		0xB0
+#define BM_POWER_STS_VBUSVALID	0x00000002
+#define BM_POWER_STS_BVALID	0x00000004
+#define BM_POWER_STS_AVALID	0x00000008
+#define BM_POWER_STS_DC_OK	0x00000100
+
+#define HW_POWER_RESET		0xE0
+
+#define HW_POWER_DEBUG		0xF0
+#define BM_POWER_DEBUG_BVALIDPIOLOCK	0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK	0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK	0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
new file mode 100644
index 00000000000..15966a1b62e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
@@ -0,0 +1,51 @@
+/*
+ * stmp37xx: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_PWM_BASE	(STMP3XXX_REGS_BASE + 0x64000)
+
+#define HW_PWM_CTRL		0x0
+#define BM_PWM_CTRL_PWM2_ENABLE	0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE	0x00000020
+
+#define HW_PWM_ACTIVE0		(0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1		(0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2		(0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3		(0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn		0x10
+#define BM_PWM_ACTIVEn_ACTIVE	0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE	0
+#define BM_PWM_ACTIVEn_INACTIVE	0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE	16
+
+#define HW_PWM_PERIOD0		(0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1		(0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2		(0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3		(0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn		0x20
+#define BM_PWM_PERIODn_PERIOD	0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD	0
+#define BM_PWM_PERIODn_ACTIVE_STATE	0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE	16
+#define BM_PWM_PERIODn_INACTIVE_STATE	0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE	18
+#define BM_PWM_PERIODn_CDIV	0x00700000
+#define BP_PWM_PERIODn_CDIV	20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..fac40edc38a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
@@ -0,0 +1,57 @@
+/*
+ * stmp37xx: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_RTC_BASE	(STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS   0x8005C000
+#define REGS_RTC_SIZE   0x2000
+
+#define HW_RTC_CTRL		0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN	0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN	0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN	0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ	0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ	0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN	0x00000010
+
+#define HW_RTC_STAT		0x10
+#define BM_RTC_STAT_NEW_REGS	0x0000FF00
+#define BP_RTC_STAT_NEW_REGS	8
+#define BM_RTC_STAT_STALE_REGS	0x00FF0000
+#define BP_RTC_STAT_STALE_REGS	16
+#define BM_RTC_STAT_RTC_PRESENT	0x80000000
+
+#define HW_RTC_SECONDS		0x30
+
+#define HW_RTC_ALARM		0x40
+
+#define HW_RTC_WATCHDOG		0x50
+
+#define HW_RTC_PERSISTENT0	0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN	0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN	0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP	0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP	0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE	0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG	0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG	18
+
+#define HW_RTC_PERSISTENT1	0x70
+
+#define HW_RTC_VERSION		0xD0
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..cbde891a06c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
@@ -0,0 +1,101 @@
+/*
+ * stmp37xx: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_SSP_BASE	(STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS	0x80010000
+#define REGS_SSP2_PHYS	0x80034000
+#define REGS_SSP_SIZE	0x2000
+
+#define HW_SSP_CTRL0		0x0
+#define BM_SSP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT	0
+#define BM_SSP_CTRL0_ENABLE	0x00010000
+#define BM_SSP_CTRL0_GET_RESP	0x00020000
+#define BM_SSP_CTRL0_LONG_RESP	0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD	0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ	0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH	0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH	22
+#define BM_SSP_CTRL0_DATA_XFER	0x01000000
+#define BM_SSP_CTRL0_READ	0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC	0x04000000
+#define BM_SSP_CTRL0_LOCK_CS	0x08000000
+#define BM_SSP_CTRL0_RUN	0x20000000
+#define BM_SSP_CTRL0_CLKGATE	0x40000000
+#define BM_SSP_CTRL0_SFTRST	0x80000000
+
+#define HW_SSP_CMD0		0x10
+#define BM_SSP_CMD0_CMD		0x000000FF
+#define BP_SSP_CMD0_CMD		0
+#define BM_SSP_CMD0_BLOCK_COUNT	0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT	8
+#define BM_SSP_CMD0_BLOCK_SIZE	0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE	16
+#define BM_SSP_CMD0_APPEND_8CYC	0x00100000
+#define BM_SSP_CMD1_CMD_ARG	0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG	0
+
+#define HW_SSP_TIMING		0x50
+#define BM_SSP_TIMING_CLOCK_RATE	0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE	0
+#define BM_SSP_TIMING_CLOCK_DIVIDE	0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE	8
+#define BM_SSP_TIMING_TIMEOUT	0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT	16
+
+#define HW_SSP_CTRL1		0x60
+#define BM_SSP_CTRL1_SSP_MODE	0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE	0
+#define BM_SSP_CTRL1_WORD_LENGTH	0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH	4
+#define BM_SSP_CTRL1_POLARITY	0x00000200
+#define BM_SSP_CTRL1_PHASE	0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE	0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ	0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN	0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ	0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN	0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ	0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN	0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN	0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN	0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ	0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ	0x80000000
+
+#define HW_SSP_DATA		0x70
+
+#define HW_SSP_SDRESP0		0x80
+
+#define HW_SSP_SDRESP1		0x90
+
+#define HW_SSP_SDRESP2		0xA0
+
+#define HW_SSP_SDRESP3		0xB0
+
+#define HW_SSP_STATUS		0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY	0x00000020
+#define BM_SSP_STATUS_TIMEOUT	0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT	0x00004000
+#define BM_SSP_STATUS_RESP_ERR	0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR	0x00010000
+#define BM_SSP_STATUS_CARD_DETECT	0x10000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
new file mode 100644
index 00000000000..4af0f6edfa7
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
@@ -0,0 +1,49 @@
+/*
+ * stmp37xx: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE	(STMP3XXX_REGS_BASE + 0x68000)
+
+#define HW_TIMROT_ROTCTRL	0x0
+#define BM_TIMROT_ROTCTRL_CLKGATE	0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST	0x80000000
+
+#define HW_TIMROT_TIMCTRL0	(0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1	(0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2	(0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn	0x20
+#define BM_TIMROT_TIMCTRLn_SELECT	0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BM_TIMROT_TIMCTRLn_PRESCALE	0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE	4
+#define BM_TIMROT_TIMCTRLn_RELOAD	0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE	0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ	0x00008000
+
+#define HW_TIMROT_TIMCOUNT0	(0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1	(0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2	(0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn	0x30
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
new file mode 100644
index 00000000000..0594275d860
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
@@ -0,0 +1,85 @@
+/*
+ * stmp37xx: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTAPP_BASE	(STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS	0x8006C000
+#define REGS_UARTAPP_SIZE	0x2000
+
+#define HW_UARTAPP_CTRL0	0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT	0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT	0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT	16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE	0x08000000
+#define BM_UARTAPP_CTRL0_RUN	0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST	0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT	0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT	0
+#define BM_UARTAPP_CTRL1_RUN	0x10000000
+
+#define HW_UARTAPP_CTRL2	0x20
+#define BM_UARTAPP_CTRL2_UARTEN	0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN	0
+#define BM_UARTAPP_CTRL2_TXE	0x00000100
+#define BM_UARTAPP_CTRL2_RXE	0x00000200
+#define BM_UARTAPP_CTRL2_RTS	0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN	0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN	0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE	0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE	0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR	0x04000000
+
+#define HW_UARTAPP_LINECTRL	0x30
+#define BM_UARTAPP_LINECTRL_BRK	0x00000001
+#define BP_UARTAPP_LINECTRL_BRK	0
+#define BM_UARTAPP_LINECTRL_PEN	0x00000002
+#define BM_UARTAPP_LINECTRL_EPS	0x00000004
+#define BM_UARTAPP_LINECTRL_STP2	0x00000008
+#define BM_UARTAPP_LINECTRL_FEN	0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN	0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN	5
+#define BM_UARTAPP_LINECTRL_SPS	0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC	0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC	8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT	0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT	16
+
+#define HW_UARTAPP_INTR		0x50
+#define BM_UARTAPP_INTR_CTSMIS	0x00000002
+#define BM_UARTAPP_INTR_RTIS	0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN	0x00020000
+#define BM_UARTAPP_INTR_RXIEN	0x00100000
+#define BM_UARTAPP_INTR_RTIEN	0x00400000
+
+#define HW_UARTAPP_DATA		0x60
+
+#define HW_UARTAPP_STAT		0x70
+#define BM_UARTAPP_STAT_RXCOUNT	0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT	0
+#define BM_UARTAPP_STAT_FERR	0x00010000
+#define BM_UARTAPP_STAT_PERR	0x00020000
+#define BM_UARTAPP_STAT_BERR	0x00040000
+#define BM_UARTAPP_STAT_OERR	0x00080000
+#define BM_UARTAPP_STAT_RXFE	0x01000000
+#define BM_UARTAPP_STAT_TXFF	0x02000000
+#define BM_UARTAPP_STAT_TXFE	0x08000000
+#define BM_UARTAPP_STAT_CTS	0x10000000
+
+#define HW_UARTAPP_VERSION	0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
new file mode 100644
index 00000000000..b810deb552a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE	(STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS	0x80070000
+#define REGS_UARTDBG_SIZE	0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE      16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED      12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v)  \
+	(((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA      0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v)  \
+	(((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE      8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC      4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v)  \
+	(((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE      16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED      9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v)  \
+	(((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE      8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR      0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v)  \
+	(((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE      16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT      0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v)  \
+	(((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE      8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+	(((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED      6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC      0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v)  \
+	(((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE      16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED      8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v)  \
+	(((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN      5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v)  \
+	(((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE      16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED      3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE      16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED      6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v)  \
+	(((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL      3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v)  \
+	(((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY      0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7       0x7
+#define BP_UARTDBGIFLS_TXIFLSEL      0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v)  \
+	(((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY	  0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER    0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF       0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS  0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5       0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6       0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7       0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE      16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED      11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE      16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED      11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE      16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED      11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE      16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED      11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v)  \
+	(((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE      16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+	(((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED      3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v)  \
+	(((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
index a93df7cba69..9145e22df32 100644
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
@@ -1,8 +1,8 @@
 /*
- *  arch/arm/mach-imx/include/mach/memory.h
+ * stmp37xx: USBCTL register definitions
  *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,11 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET	UL(0x08000000)
-
-#endif
+#define REGS_USBCTL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTL_PHYS	0x80000
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
index 7d7cb0bde3e..1a2ae9cbdfe 100644
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
@@ -1,7 +1,8 @@
 /*
- *  arch/arm/mach-imx/include/mach/vmalloc.h
+ * stmp37xx: USBCTRL register definitions
  *
- *  Copyright (C) 2000 Russell King.
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,6 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define REGS_USBCTRL_BASE	(STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS	0x80080000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
new file mode 100644
index 00000000000..b7fce0fbc56
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#define REGS_USBPHY_BASE	(STMP3XXX_REGS_BASE + 0x7C000)
+
+#define HW_USBPHY_PWD		0x0
+
+#define HW_USBPHY_CTRL		0x30
+#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT	0x00000001
+#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT	0
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT	0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT	0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN	0x00000800
+#define BM_USBPHY_CTRL_CLKGATE	0x40000000
+#define BM_USBPHY_CTRL_SFTRST	0x80000000
+
+#define HW_USBPHY_STATUS	0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS	0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS	0x00000100
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c
new file mode 100644
index 00000000000..8c7d6fb191a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.c
@@ -0,0 +1,219 @@
+/*
+ * Freescale STMP37XX platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/dma.h>
+
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include "stmp37xx.h"
+
+/*
+ * IRQ handling
+ */
+static void stmp37xx_ack_irq(unsigned int irq)
+{
+	/* Disable IRQ */
+	stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+
+	/* ACK current interrupt */
+	__raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp37xx_mask_irq(unsigned int irq)
+{
+	/* IRQ disable */
+	stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static void stmp37xx_unmask_irq(unsigned int irq)
+{
+	/* IRQ enable */
+	stmp3xxx_setl(0x04 << ((irq % 4) * 8),
+		REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static struct irq_chip stmp37xx_chip = {
+	.ack	= stmp37xx_ack_irq,
+	.mask	= stmp37xx_mask_irq,
+	.unmask = stmp37xx_unmask_irq,
+};
+
+void __init stmp37xx_init_irq(void)
+{
+	stmp3xxx_init_irq(&stmp37xx_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+			REGS_APBH_BASE + HW_APBH_CTRL1);
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+			REGS_APBX_BASE + HW_APBX_CTRL1);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+				REGS_APBH_BASE + HW_APBH_CTRL1);
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+				REGS_APBX_BASE + HW_APBX_CTRL1);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+	int r = 0;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+			(1 << STMP3XXX_DMA_CHANNEL(channel));
+		break;
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		/* Reset channel and wait for it to complete */
+		stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+		while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) &
+		       (chbit << BP_APBH_CTRL0_RESET_CHANNEL))
+				cpu_relax();
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+		while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) &
+		       (chbit << BP_APBX_CTRL0_RESET_CHANNEL))
+				cpu_relax();
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+	unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	case STMP3XXX_BUS_APBX:
+		stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+		break;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical      Physical
+ * f0000000	80000000	On-chip registers
+ * f1000000	00000000	32k on-chip SRAM
+ */
+static struct map_desc stmp37xx_io_desc[] __initdata = {
+	{
+		.virtual	= (u32)STMP3XXX_REGS_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= (u32)STMP3XXX_OCRAM_BASE,
+		.pfn		= __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+		.length		= STMP3XXX_OCRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init stmp37xx_map_io(void)
+{
+	iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc));
+}
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.h b/arch/arm/mach-stmp37xx/stmp37xx.h
new file mode 100644
index 00000000000..0b75fb796a6
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.h
@@ -0,0 +1,24 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP37XX_H
+#define __MACH_STMP37XX_H
+
+void stmp37xx_map_io(void);
+void stmp37xx_init_irq(void);
+
+#endif /* __MACH_STMP37XX_H */
diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
new file mode 100644
index 00000000000..394f21ab59e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
@@ -0,0 +1,101 @@
+/*
+ * Freescale STMP37XX development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include "stmp37xx.h"
+
+/*
+ * List of STMP37xx development board specific devices
+ */
+static struct platform_device *stmp37xx_devb_devices[] = {
+	&stmp3xxx_dbguart,
+	&stmp3xxx_appuart,
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+	{ PINID_PWM0, PIN_FUN3, },
+	{ PINID_PWM1, PIN_FUN3, },
+};
+
+struct pin_desc appuart_pins_0[] = {
+	{ PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+	{ PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_group appuart_pins[] = {
+	[0] = {
+		.pins		= appuart_pins_0,
+		.nr_pins	= ARRAY_SIZE(appuart_pins_0),
+	},
+	/* 37xx has the only app uart */
+};
+
+static struct pin_group dbguart_pins[] = {
+	[0] = {
+		.pins		= dbguart_pins_0,
+		.nr_pins	= ARRAY_SIZE(dbguart_pins_0),
+	},
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+	int r = 0;
+
+	if (request)
+		r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+	else
+		stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+	return r;
+}
+
+
+static void __init stmp37xx_devb_init(void)
+{
+	stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+	/* Init STMP3xxx platform */
+	stmp3xxx_init();
+
+	stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+	stmp3xxx_appuart.dev.platform_data = appuart_pins;
+
+	/* Add STMP37xx development board devices */
+	platform_add_devices(stmp37xx_devb_devices,
+			ARRAY_SIZE(stmp37xx_devb_devices));
+}
+
+MACHINE_START(STMP37XX, "STMP37XX")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
+	.boot_params	= 0x40000100,
+	.map_io		= stmp37xx_map_io,
+	.init_irq	= stmp37xx_init_irq,
+	.timer		= &stmp3xxx_timer,
+	.init_machine	= stmp37xx_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
new file mode 100644
index 00000000000..337b9aabce4
--- /dev/null
+++ b/arch/arm/mach-u300/Kconfig
@@ -0,0 +1,105 @@
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+
+comment "ST-Ericsson Mobile Platform Products"
+
+config MACH_U300
+	bool "U300"
+
+comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
+
+choice
+	prompt "U300/U330/U335/U365 system type"
+	default MACH_U300_BS2X
+	---help---
+	You need to select the target system, i.e. the
+	U300/U330/U335/U365 board that you want to compile your kernel
+	for.
+
+config MACH_U300_BS2X
+	bool "S26/S26/B25/B26 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S26/S25 test products. (Also works on
+		B26/B25 big boards.)
+
+config MACH_U300_BS330
+	bool "S330/B330 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S330/B330 test products.
+
+config MACH_U300_BS335
+	bool "S335/B335 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S335/B335 test products.
+
+config MACH_U300_BS365
+	bool "S365/B365 Test Products"
+	depends on MACH_U300
+	help
+		Select this if you're developing on the
+		S365/B365 test products.
+
+endchoice
+
+choice
+	prompt "Memory configuration"
+	default MACH_U300_SINGLE_RAM
+	---help---
+	You have to config the kernel according to the physical memory
+	configuration.
+
+config MACH_U300_SINGLE_RAM
+	bool "Single RAM"
+	help
+		Select this if you want support for Single RAM phones.
+
+config MACH_U300_DUAL_RAM
+	bool "Dual RAM"
+	help
+		Select this if you want support for Dual RAM phones.
+		This is two RAM memorys on different EMIFs.
+endchoice
+
+config U300_DEBUG
+	bool "Debug support for U300"
+	depends on PM
+	help
+		Debug support for U300 in sysfs, procfs etc.
+
+config MACH_U300_SEMI_IS_SHARED
+	bool "The SEMI is used by both the access and application side"
+	depends on MACH_U300
+	help
+		This makes it possible to use the SEMI (Shared External
+		Memory Interface) from both from access and application
+		side.
+
+comment "All the settings below must match the bootloader's settings"
+
+config MACH_U300_ACCESS_MEM_SIZE
+       int "Access CPU memory allocation"
+       range 7 25
+       depends on MACH_U300_SINGLE_RAM
+       default 13
+       help
+		How much memory in MiB that the Access side CPU has allocated
+
+config MACH_U300_2MB_ALIGNMENT_FIX
+       bool "2MiB alignment fix"
+       depends on MACH_U300_SINGLE_RAM
+       default y
+       help
+		If yes and the Access side CPU has allocated an odd size in
+		MiB, this fix gives you one MiB extra that would otherwise be
+		lost due to Linux 2 MiB alignment policy.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
new file mode 100644
index 00000000000..24950e0df4b
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel, U300 machine.
+#
+
+obj-y		:= core.o clock.o timer.o gpio.o padmux.o
+obj-m		:=
+obj-n		:=
+obj-		:=
+
+obj-$(CONFIG_ARCH_U300)	          += u300.o
+obj-$(CONFIG_MMC)                 += mmc.o
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
new file mode 100644
index 00000000000..6fbfc6ea2d3
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -0,0 +1,15 @@
+# Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(TEXTADDR)
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+ifdef CONFIG_MACH_U300_SINGLE_RAM
+     zreladdr-y	:= 0x28E08000
+  params_phys-y	:= 0x28E00100
+else
+     zreladdr-y	:= 0x48008000
+  params_phys-y	:= 0x48000100
+endif
+
+# This isn't used.
+#initrd_phys-y	:= 0x29800000
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
new file mode 100644
index 00000000000..5cd04d6751b
--- /dev/null
+++ b/arch/arm/mach-u300/clock.c
@@ -0,0 +1,1487 @@
+/*
+ *
+ * arch/arm/mach-u300/clock.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Define clocks in the app platform.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+
+/*
+ * TODO:
+ * - move all handling of the CCR register into this file and create
+ *   a spinlock for the CCR register
+ * - switch to the clkdevice lookup mechanism that maps clocks to
+ *   device ID:s instead when it becomes available in kernel 2.6.29.
+ * - implement rate get/set for all clocks that need it.
+ */
+
+/*
+ * Syscon clock I/O registers lock so clock requests don't collide
+ * NOTE: this is a local lock only used to lock access to clock and
+ * reset registers in syscon.
+ */
+static DEFINE_SPINLOCK(syscon_clkreg_lock);
+static DEFINE_SPINLOCK(syscon_resetreg_lock);
+
+/*
+ * The clocking hierarchy currently looks like this.
+ * NOTE: the idea is NOT to show how the clocks are routed on the chip!
+ * The ideas is to show dependencies, so a clock higher up in the
+ * hierarchy has to be on in order for another clock to be on. Now,
+ * both CPU and DMA can actually be on top of the hierarchy, and that
+ * is not modeled currently. Instead we have the backbone AMBA bus on
+ * top. This bus cannot be programmed in any way but conceptually it
+ * needs to be active for the bridges and devices to transport data.
+ *
+ * Please be aware that a few clocks are hw controlled, which mean that
+ * the hw itself can turn on/off or change the rate of the clock when
+ * needed!
+ *
+ *  AMBA bus
+ *  |
+ *  +- CPU
+ *  +- NANDIF NAND Flash interface
+ *  +- SEMI Shared Memory interface
+ *  +- ISP Image Signal Processor (U335 only)
+ *  +- CDS (U335 only)
+ *  +- DMA Direct Memory Access Controller
+ *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
+ *  +- APEX
+ *  +- VIDEO_ENC AVE2/3 Video Encoder
+ *  +- XGAM Graphics Accelerator Controller
+ *  +- AHB
+ *  |
+ *  +- ahb:0 AHB Bridge
+ *  |  |
+ *  |  +- ahb:1 INTCON Interrupt controller
+ *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
+ *  |  +- ahb:4 EMIF   External Memory interface
+ *  |
+ *  +- fast:0 FAST bridge
+ *  |  |
+ *  |  +- fast:1 MMCSD MMC/SD card reader controller
+ *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
+ *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
+ *  |  +- fast:4 I2C0  I2C channel 0 controller
+ *  |  +- fast:5 I2C1  I2C channel 1 controller
+ *  |  +- fast:6 SPI   SPI controller
+ *  |  +- fast:7 UART1 Secondary UART (U335 only)
+ *  |
+ *  +- slow:0 SLOW bridge
+ *     |
+ *     +- slow:1 SYSCON (not possible to control)
+ *     +- slow:2 WDOG Watchdog
+ *     +- slow:3 UART0 primary UART
+ *     +- slow:4 TIMER_APP Application timer - used in Linux
+ *     +- slow:5 KEYPAD controller
+ *     +- slow:6 GPIO controller
+ *     +- slow:7 RTC controller
+ *     +- slow:8 BT Bus Tracer (not used currently)
+ *     +- slow:9 EH Event Handler (not used currently)
+ *     +- slow:a TIMER_ACC Access style timer (not used currently)
+ *     +- slow:b PPM (U335 only, what is that?)
+ */
+
+/*
+ * Reset control functions. We remember if a block has been
+ * taken out of reset and don't remove the reset assertion again
+ * and vice versa. Currently we only remove resets so the
+ * enablement function is defined out.
+ */
+static void syscon_block_reset_enable(struct clk *clk)
+{
+	u16 val;
+	unsigned long iflags;
+
+	/* Not all blocks support resetting */
+	if (!clk->res_reg || !clk->res_mask)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(clk->res_reg);
+	val |= clk->res_mask;
+	writew(val, clk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	clk->reset = true;
+}
+
+static void syscon_block_reset_disable(struct clk *clk)
+{
+	u16 val;
+	unsigned long iflags;
+
+	/* Not all blocks support resetting */
+	if (!clk->res_reg || !clk->res_mask)
+		return;
+	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+	val = readw(clk->res_reg);
+	val &= ~clk->res_mask;
+	writew(val, clk->res_reg);
+	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+	clk->reset = false;
+}
+
+int __clk_get(struct clk *clk)
+{
+	u16 val;
+
+	/* The MMC and MSPRO clocks need some special set-up */
+	if (!strcmp(clk->name, "MCLK")) {
+		/* Set default MMC clock divisor to 18.9 MHz */
+		writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Disable MSPRO frequency */
+		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+	}
+	if (!strcmp(clk->name, "MSPRO")) {
+		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+		/* Disable the MMC feedback clock */
+		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+		/* Enable MSPRO frequency */
+		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+	}
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+static void syscon_clk_disable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	/* Don't touch the hardware controlled clocks */
+	if (clk->hw_ctrld)
+		return;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void syscon_clk_enable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	/* Don't touch the hardware controlled clocks */
+	if (clk->hw_ctrld)
+		return;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static u16 syscon_clk_get_rate(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+	return val;
+}
+
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+static void enable_i2s0_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Set I2S0 to use the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void enable_i2s1_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Set I2S1 to use the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s0_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Disable I2S0 use of the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Deactivate VCXO if noone else is using VCXO */
+	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
+		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s1_vcxo(void)
+{
+	u16 val;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	/* Disable I2S1 use of the VCXO 26 MHz clock */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Deactivate VCXO if noone else is using VCXO */
+	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
+		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
+
+
+static void syscon_clk_rate_set_mclk(unsigned long rate)
+{
+	u16 val;
+	u32 reg;
+	unsigned long iflags;
+
+	switch (rate) {
+	case 18900000:
+		val = 0x0054;
+		break;
+	case 20800000:
+		val = 0x0044;
+		break;
+	case 23100000:
+		val = 0x0043;
+		break;
+	case 26000000:
+		val = 0x0033;
+		break;
+	case 29700000:
+		val = 0x0032;
+		break;
+	case 34700000:
+		val = 0x0022;
+		break;
+	case 41600000:
+		val = 0x0021;
+		break;
+	case 52000000:
+		val = 0x0011;
+		break;
+	case 104000000:
+		val = 0x0000;
+		break;
+	default:
+		printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
+		       rate);
+		return;
+	}
+
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+		~U300_SYSCON_MMF0R_MASK;
+	writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+void syscon_clk_rate_set_cpuclk(unsigned long rate)
+{
+	u16 val;
+	unsigned long iflags;
+
+	switch (rate) {
+	case 13000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
+		break;
+	case 52000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
+		break;
+	case 104000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
+		break;
+	case 208000000:
+		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
+		break;
+	default:
+		return;
+	}
+	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+	val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
+		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long iflags;
+
+	spin_lock_irqsave(&clk->lock, iflags);
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		/* some blocks lack clocking registers and cannot be disabled */
+		if (clk->disable)
+			clk->disable(clk);
+		if (likely((u32)clk->parent))
+			clk_disable(clk->parent);
+	}
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+	if (unlikely(!strcmp(clk->name, "I2S0")))
+		disable_i2s0_vcxo();
+	if (unlikely(!strcmp(clk->name, "I2S1")))
+		disable_i2s1_vcxo();
+#endif
+	spin_unlock_irqrestore(&clk->lock, iflags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&clk->lock, iflags);
+	if (clk->usecount++ == 0) {
+		if (likely((u32)clk->parent))
+			ret = clk_enable(clk->parent);
+
+		if (unlikely(ret != 0))
+			clk->usecount--;
+		else {
+			/* remove reset line (we never enable reset again) */
+			syscon_block_reset_disable(clk);
+			/* clocks without enable function are always on */
+			if (clk->enable)
+				clk->enable(clk);
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+			if (unlikely(!strcmp(clk->name, "I2S0")))
+				enable_i2s0_vcxo();
+			if (unlikely(!strcmp(clk->name, "I2S1")))
+				enable_i2s1_vcxo();
+#endif
+		}
+	}
+	spin_unlock_irqrestore(&clk->lock, iflags);
+	return ret;
+
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* Returns the clock rate in Hz */
+static unsigned long clk_get_rate_cpuclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 52000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+		return 104000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 208000000;
+	default:
+		break;
+	}
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 6500000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 26000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 52000000;
+	default:
+		break;
+	}
+	return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_emif_clk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 52000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 104000000;
+	default:
+		break;
+	}
+	return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_xgamclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 6500000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+		return 26000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 52000000;
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_mclk(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+		/*
+		 * Here, the 208 MHz PLL gets shut down and the always
+		 * on 13 MHz PLL used for RTC etc kicks into use
+		 * instead.
+		 */
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+	{
+		/*
+		 * This clock is under program control. The register is
+		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
+		 * high, bit 3-0 gives cycles-1 to count low. Distribute
+		 * these with no more than 1 cycle difference between
+		 * low and high and add low and high to get the actual
+		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
+		 * divide by 1 and 1 so the highest frequency possible
+		 * is 104 MHz.
+		 *
+		 * e.g. 0x54 =>
+		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
+		 */
+		u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+			U300_SYSCON_MMF0R_MASK;
+		switch (val) {
+		case 0x0054:
+			return 18900000;
+		case 0x0044:
+			return 20800000;
+		case 0x0043:
+			return 23100000;
+		case 0x0033:
+			return 26000000;
+		case 0x0032:
+			return 29700000;
+		case 0x0022:
+			return 34700000;
+		case 0x0021:
+			return 41600000;
+		case 0x0011:
+			return 52000000;
+		case 0x0000:
+			return 104000000;
+		default:
+			break;
+		}
+	}
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
+{
+	u16 val;
+
+	val = syscon_clk_get_rate();
+
+	switch (val) {
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+		return 13000000;
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+		return 26000000;
+	default:
+		break;
+	}
+
+	return clk->rate;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+	else
+		return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
+{
+	if (rate >= 18900000)
+		return 18900000;
+	if (rate >= 20800000)
+		return 20800000;
+	if (rate >= 23100000)
+		return 23100000;
+	if (rate >= 26000000)
+		return 26000000;
+	if (rate >= 29700000)
+		return 29700000;
+	if (rate >= 34700000)
+		return 34700000;
+	if (rate >= 41600000)
+		return 41600000;
+	if (rate >= 52000000)
+		return 52000000;
+	return -EINVAL;
+}
+
+static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+	if (rate >= 13000000)
+		return 13000000;
+	if (rate >= 52000000)
+		return 52000000;
+	if (rate >= 104000000)
+		return 104000000;
+	if (rate >= 208000000)
+		return 208000000;
+	return -EINVAL;
+}
+
+/*
+ * This adjusts a requested rate to the closest exact rate
+ * a certain clock can provide. For a fixed clock it's
+ * mostly clk->rate.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
+	/* Else default to fixed value */
+
+	if (clk->round_rate) {
+		return (long) clk->round_rate(clk, rate);
+	} else {
+		printk(KERN_ERR "clock: Failed to round rate of %s\n",
+		       clk->name);
+	}
+	return (long) clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
+{
+	syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
+	return 0;
+}
+
+static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+	syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	/* TODO: set for EMIFCLK and AHBCLK */
+	/* Else assume the clock is fixed and fail */
+	if (clk->set_rate) {
+		return clk->set_rate(clk, rate);
+	} else {
+		printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
+		       clk->name, rate);
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * Clock definitions. The clock parents are set to respective
+ * bridge and the clock framework makes sure that the clocks have
+ * parents activated and are brought out of reset when in use.
+ *
+ * Clocks that have hw_ctrld = true are hw controlled, and the hw
+ * can by itself turn these clocks on and off.
+ * So in other words, we don't really have to care about them.
+ */
+
+static struct clk amba_clk = {
+	.name	    = "AMBA",
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = false,
+};
+
+/*
+ * These blocks are connected directly to the AMBA bus
+ * with no bridge.
+ */
+
+static struct clk cpu_clk = {
+	.name	    = "CPU",
+	.parent	    = &amba_clk,
+	.rate	    = 208000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
+	.set_rate   = clk_set_rate_cpuclk,
+	.get_rate   = clk_get_rate_cpuclk,
+	.round_rate = clk_round_rate_cpuclk,
+};
+
+static struct clk nandif_clk = {
+	.name       = "NANDIF",
+	.parent	    = &amba_clk,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk semi_clk = {
+	.name       = "SEMI",
+	.parent	    = &amba_clk,
+	.rate       = 0, /* FIXME */
+	/* It is not possible to reset SEMI */
+	.hw_ctrld   = false,
+	.reset	    = false,
+	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk isp_clk = {
+	.name	    = "ISP",
+	.parent	    = &amba_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk cds_clk = {
+	.name	    = "CDS",
+	.parent	    = &amba_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+static struct clk dma_clk = {
+	.name       = "DMA",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk aaif_clk = {
+	.name       = "AAIF",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk apex_clk = {
+	.name       = "APEX",
+	.parent	    = &amba_clk,
+	.rate       = 0, /* FIXME */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk video_enc_clk = {
+	.name       = "VIDEO_ENC",
+	.parent	    = &amba_clk,
+	.rate       = 208000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = false,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	/* This has XGAM in the name but refers to the video encoder */
+	.res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk xgam_clk = {
+	.name       = "XGAMCLK",
+	.parent	    = &amba_clk,
+	.rate       = 52000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
+	.get_rate   = clk_get_rate_xgamclk,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+/* This clock is used to activate the video encoder */
+static struct clk ahb_clk = {
+	.name	    = "AHB",
+	.parent	    = &amba_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = false, /* This one is set to false due to HW bug */
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_ahb_clk,
+};
+
+
+/*
+ * Clocks on the AHB bridge
+ */
+
+static struct clk ahb_subsys_clk = {
+	.name	    = "AHB_SUBSYS",
+	.parent	    = &amba_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = false,
+	.clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_ahb_clk,
+};
+
+static struct clk intcon_clk = {
+	.name	    = "INTCON",
+	.parent	    = &ahb_subsys_clk,
+	.rate	    = 52000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
+	/* INTCON can be reset but not clock-gated */
+};
+
+static struct clk mspro_clk = {
+	.name       = "MSPRO",
+	.parent	    = &ahb_subsys_clk,
+	.rate       = 0, /* FIXME */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk emif_clk = {
+	.name	    = "EMIF",
+	.parent	    = &ahb_subsys_clk,
+	.rate	    = 104000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+	.res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_emif_clk,
+};
+
+
+/*
+ * Clocks on the FAST bridge
+ */
+static struct clk fast_clk = {
+	.name	    = "FAST_BRIDGE",
+	.parent	    = &amba_clk,
+	.rate	    = 13000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk mmcsd_clk = {
+	.name       = "MCLK",
+	.parent	    = &fast_clk,
+	.rate       = 18900000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
+	.get_rate   = clk_get_rate_mclk,
+	.set_rate   = clk_set_rate_mclk,
+	.round_rate = clk_round_rate_mclk,
+	.disable    = syscon_clk_disable,
+	.enable     = syscon_clk_enable,
+};
+
+static struct clk i2s0_clk = {
+	.name       = "i2s0",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2s1_clk = {
+	.name       = "i2s1",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c0_clk = {
+	.name       = "I2C0",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c1_clk = {
+	.name       = "I2C1",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk spi_clk = {
+	.name       = "SPI",
+	.parent	    = &fast_clk,
+	.rate       = 26000000, /* this varies! */
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+	.get_rate   = clk_get_rate_i2s_i2c_spi,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk uart1_clk = {
+	.name	    = "UART1",
+	.parent	    = &fast_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+	.res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
+	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+
+/*
+ * Clocks on the SLOW bridge
+ */
+static struct clk slow_clk = {
+	.name	    = "SLOW_BRIDGE",
+	.parent	    = &amba_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+/* TODO: implement SYSCON clock? */
+
+static struct clk wdog_clk = {
+	.name	    = "WDOG",
+	.parent	    = &slow_clk,
+	.hw_ctrld   = false,
+	.rate	    = 32768,
+	.reset	    = false,
+	/* This is always on, cannot be enabled/disabled or reset */
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart_clk = {
+	.name	    = "UARTCLK",
+	.parent	    = &slow_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk keypad_clk = {
+	.name       = "KEYPAD",
+	.parent	    = &slow_clk,
+	.rate       = 32768,
+	.hw_ctrld   = false,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.name       = "GPIO",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.name	    = "RTC",
+	.parent	    = &slow_clk,
+	.rate	    = 32768,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
+	/* This clock is always on, cannot be enabled/disabled */
+};
+
+static struct clk bustr_clk = {
+	.name       = "BUSTR",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk evhist_clk = {
+	.name       = "EVHIST",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk timer_clk = {
+	.name       = "TIMER",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+static struct clk app_timer_clk = {
+	.name       = "TIMER_APP",
+	.parent	    = &slow_clk,
+	.rate       = 13000000,
+	.hw_ctrld   = true,
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk ppm_clk = {
+	.name	    = "PPM",
+	.parent	    = &slow_clk,
+	.rate	    = 0, /* FIXME */
+	.hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
+	.reset	    = true,
+	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+	.res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
+	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
+	.enable     = syscon_clk_enable,
+	.disable    = syscon_clk_disable,
+};
+#endif
+
+#define DEF_LOOKUP(devid, clkref)		\
+	{					\
+	.dev_id = devid,			\
+	.clk = clkref,				\
+	}
+
+/*
+ * Here we only define clocks that are meaningful to
+ * look up through clockdevice.
+ */
+static struct clk_lookup lookups[] = {
+	/* Connected directly to the AMBA bus */
+	DEF_LOOKUP("amba", &amba_clk),
+	DEF_LOOKUP("cpu", &cpu_clk),
+	DEF_LOOKUP("nandif", &nandif_clk),
+	DEF_LOOKUP("semi", &semi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("isp", &isp_clk),
+	DEF_LOOKUP("cds", &cds_clk),
+#endif
+	DEF_LOOKUP("dma", &dma_clk),
+	DEF_LOOKUP("aaif", &aaif_clk),
+	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("video_enc", &video_enc_clk),
+	DEF_LOOKUP("xgam", &xgam_clk),
+	DEF_LOOKUP("ahb", &ahb_clk),
+	/* AHB bridge clocks */
+	DEF_LOOKUP("ahb", &ahb_subsys_clk),
+	DEF_LOOKUP("intcon", &intcon_clk),
+	DEF_LOOKUP("mspro", &mspro_clk),
+	DEF_LOOKUP("pl172", &emif_clk),
+	/* FAST bridge clocks */
+	DEF_LOOKUP("fast", &fast_clk),
+	DEF_LOOKUP("mmci", &mmcsd_clk),
+	/*
+	 * The .0 and .1 identifiers on these comes from the platform device
+	 * .id field and are assigned when the platform devices are registered.
+	 */
+	DEF_LOOKUP("i2s.0", &i2s0_clk),
+	DEF_LOOKUP("i2s.1", &i2s1_clk),
+	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
+	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
+	DEF_LOOKUP("pl022", &spi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("uart1", &uart1_clk),
+#endif
+	/* SLOW bridge clocks */
+	DEF_LOOKUP("slow", &slow_clk),
+	DEF_LOOKUP("wdog", &wdog_clk),
+	DEF_LOOKUP("uart0", &uart_clk),
+	DEF_LOOKUP("apptimer", &app_timer_clk),
+	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("u300-gpio", &gpio_clk),
+	DEF_LOOKUP("rtc0", &rtc_clk),
+	DEF_LOOKUP("bustr", &bustr_clk),
+	DEF_LOOKUP("evhist", &evhist_clk),
+	DEF_LOOKUP("timer", &timer_clk),
+#ifdef CONFIG_MACH_U300_BS335
+	DEF_LOOKUP("ppm", &ppm_clk),
+#endif
+};
+
+static void __init clk_register(void)
+{
+	int i;
+
+	/* Register the lookups */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+}
+
+/*
+ * These are the clocks for cells registered as primecell drivers
+ * on the AMBA bus. These must be on during AMBA device registration
+ * since the bus probe will attempt to read magic configuration
+ * registers for these devices. If they are deactivated these probes
+ * will fail.
+ *
+ *
+ * Please note that on emif, both RAM and NAND is connected in dual
+ * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
+ *
+ */
+void u300_clock_primecells(void)
+{
+	clk_enable(&intcon_clk);
+	clk_enable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+	clk_enable(&uart1_clk);
+#endif
+	clk_enable(&spi_clk);
+
+	clk_enable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_clock_primecells);
+
+void u300_unclock_primecells(void)
+{
+
+	clk_disable(&intcon_clk);
+	clk_disable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+	clk_disable(&uart1_clk);
+#endif
+	clk_disable(&spi_clk);
+	clk_disable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_unclock_primecells);
+
+/*
+ * The interrupt controller is enabled before the clock API is registered.
+ */
+void u300_enable_intcon_clock(void)
+{
+	clk_enable(&intcon_clk);
+}
+EXPORT_SYMBOL(u300_enable_intcon_clock);
+
+/*
+ * The timer is enabled before the clock API is registered.
+ */
+void u300_enable_timer_clock(void)
+{
+	clk_enable(&app_timer_clk);
+}
+EXPORT_SYMBOL(u300_enable_timer_clock);
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+/*
+ * The following makes it possible to view the status (especially
+ * reference count and reset status) for the clocks in the platform
+ * by looking into the special file <debugfs>/u300_clocks
+ */
+
+/* A list of all clocks in the platform */
+static struct clk *clks[] = {
+	/* Top node clock for the AMBA bus */
+	&amba_clk,
+	/* Connected directly to the AMBA bus */
+	&cpu_clk,
+	&nandif_clk,
+	&semi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&isp_clk,
+	&cds_clk,
+#endif
+	&dma_clk,
+	&aaif_clk,
+	&apex_clk,
+	&video_enc_clk,
+	&xgam_clk,
+	&ahb_clk,
+
+	/* AHB bridge clocks */
+	&ahb_subsys_clk,
+	&intcon_clk,
+	&mspro_clk,
+	&emif_clk,
+	/* FAST bridge clocks */
+	&fast_clk,
+	&mmcsd_clk,
+	&i2s0_clk,
+	&i2s1_clk,
+	&i2c0_clk,
+	&i2c1_clk,
+	&spi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_clk,
+#endif
+	/* SLOW bridge clocks */
+	&slow_clk,
+	&wdog_clk,
+	&uart_clk,
+	&app_timer_clk,
+	&keypad_clk,
+	&gpio_clk,
+	&rtc_clk,
+	&bustr_clk,
+	&evhist_clk,
+	&timer_clk,
+#ifdef CONFIG_MACH_U300_BS335
+	&ppm_clk,
+#endif
+};
+
+static int u300_clocks_show(struct seq_file *s, void *data)
+{
+	struct clk *clk;
+	int i;
+
+	seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
+		   "ACTIVE\tUSERS\tHW CTRL FREQ\n");
+	seq_printf(s, "---------------------------------------------" \
+		   "-----------------------------------------\n");
+	for (i = 0; i < ARRAY_SIZE(clks); i++) {
+		clk = clks[i];
+		if (clk != ERR_PTR(-ENOENT)) {
+			/* Format clock and device name nicely */
+			char cdp[33];
+			int chars;
+
+			chars = snprintf(&cdp[0], 17, "%s", clk->name);
+			while (chars < 16) {
+				cdp[chars] = ' ';
+				chars++;
+			}
+			chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
+					 dev_name(clk->dev) : "N/A");
+			while (chars < 16) {
+				cdp[chars+16] = ' ';
+				chars++;
+			}
+			cdp[32] = '\0';
+			if (clk->get_rate)
+				seq_printf(s,
+					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
+					   &cdp[0],
+					   clk->reset ?
+					   "ASSERTED" : "RELEASED",
+					   clk->usecount ? "ON" : "OFF",
+					   clk->usecount,
+					   clk->hw_ctrld  ? "YES" : "NO ",
+					   clk->get_rate(clk));
+			else
+				seq_printf(s,
+					   "%s%s\t%s\t%d\t%s\t" \
+					   "(unknown rate)\n",
+					   &cdp[0],
+					   clk->reset ?
+					   "ASSERTED" : "RELEASED",
+					   clk->usecount ? "ON" : "OFF",
+					   clk->usecount,
+					   clk->hw_ctrld  ? "YES" : "NO ");
+		}
+	}
+	return 0;
+}
+
+static int u300_clocks_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u300_clocks_show, NULL);
+}
+
+static const struct file_operations u300_clocks_operations = {
+	.open		= u300_clocks_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void init_clk_read_procfs(void)
+{
+	/* Expose a simple debugfs interface to view all clocks */
+	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
+				   NULL, NULL, &u300_clocks_operations);
+}
+#else
+static inline void init_clk_read_procfs(void)
+{
+}
+#endif
+
+static int __init u300_clock_init(void)
+{
+	u16 val;
+
+	/*
+	 * FIXME: shall all this powermanagement stuff really live here???
+	 */
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Power management enable */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+	clk_register();
+
+	init_clk_read_procfs();
+
+	/*
+	 * Some of these may be on when we boot the system so make sure they
+	 * are turned OFF.
+	 */
+	syscon_block_reset_enable(&timer_clk);
+	timer_clk.disable(&timer_clk);
+
+	/*
+	 * These shall be turned on by default when we boot the system
+	 * so make sure they are ON. (Adding CPU here is a bit too much.)
+	 * These clocks will be claimed by drivers later.
+	 */
+	syscon_block_reset_disable(&semi_clk);
+	syscon_block_reset_disable(&emif_clk);
+	semi_clk.enable(&semi_clk);
+	emif_clk.enable(&emif_clk);
+
+	return 0;
+}
+/* initialize clocking early to be available later in the boot */
+core_initcall(u300_clock_init);
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
new file mode 100644
index 00000000000..fc6d9ccfe7e
--- /dev/null
+++ b/arch/arm/mach-u300/clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-u300/include/mach/clock.h
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Adopted to ST-Ericsson U300 platforms by
+ * Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MACH_CLOCK_H
+#define __MACH_CLOCK_H
+
+#include <linux/clk.h>
+
+struct clk {
+	struct list_head node;
+	struct module *owner;
+	struct device *dev;
+	const char *name;
+	struct clk *parent;
+
+	spinlock_t lock;
+	unsigned long rate;
+	bool reset;
+	__u16 clk_val;
+	__s8 usecount;
+	__u32 res_reg;
+	__u16 res_mask;
+
+	bool hw_ctrld;
+
+	void (*recalc) (struct clk *);
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	void (*init) (struct clk *);
+	void (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+};
+
+void u300_clock_primecells(void);
+void u300_unclock_primecells(void);
+void u300_enable_intcon_clock(void);
+void u300_enable_timer_clock(void);
+
+#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
new file mode 100644
index 00000000000..89b3ccf35e1
--- /dev/null
+++ b/arch/arm/mach-u300/core.c
@@ -0,0 +1,649 @@
+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/termios.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+#include "mmc.h"
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+	{
+		.virtual	= U300_SLOW_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_AHB_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_FAST_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= 0xffff2000, /* TCM memory */
+		.pfn		= __phys_to_pfn(0xffff2000),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+
+	/*
+	 * This overlaps with the IRQ vectors etc at 0xffff0000, so these
+	 * may have to be moved to 0x00000000 in order to use the ROM.
+	 */
+	/*
+	{
+		.virtual	= U300_BOOTROM_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_ROM,
+	},
+	*/
+};
+
+void __init u300_map_io(void)
+{
+	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+/*
+ * Declaration of devices found on the U300 board and
+ * their respective memory locations.
+ */
+static struct amba_device uart0_device = {
+	.dev = {
+		.init_name = "uart0", /* Slow device at 0x3000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART0_BASE,
+		.end   = U300_UART0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART0, NO_IRQ },
+};
+
+/* The U335 have an additional UART1 on the APP CPU */
+#ifdef CONFIG_MACH_U300_BS335
+static struct amba_device uart1_device = {
+	.dev = {
+		.init_name = "uart1", /* Fast device at 0x7000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_UART1_BASE,
+		.end   = U300_UART1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = { IRQ_U300_UART1, NO_IRQ },
+};
+#endif
+
+static struct amba_device pl172_device = {
+	.dev = {
+		.init_name = "pl172", /* AHB device at 0x4000 offset */
+		.platform_data = NULL,
+	},
+	.res = {
+		.start = U300_EMIF_CFG_BASE,
+		.end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+
+/*
+ * Everything within this next ifdef deals with external devices connected to
+ * the APP SPI bus.
+ */
+static struct amba_device pl022_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "pl022", /* Fast device at 0x6000 offset */
+	},
+	.res = {
+		.start = U300_SPI_BASE,
+		.end   = U300_SPI_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_SPI, NO_IRQ },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+static struct amba_device mmcsd_device = {
+	.dev = {
+		.init_name = "mmci", /* Fast device at 0x1000 offset */
+		.platform_data = NULL, /* Added later */
+	},
+	.res = {
+		.start = U300_MMCSD_BASE,
+		.end   = U300_MMCSD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
+	/*
+	 * This device has a DMA channel but the Linux driver does not use
+	 * it currently.
+	 */
+};
+
+/*
+ * The order of device declaration may be important, since some devices
+ * have dependencies on other devices being initialized first.
+ */
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+#ifdef CONFIG_MACH_U300_BS335
+	&uart1_device,
+#endif
+	&pl022_device,
+	&pl172_device,
+	&mmcsd_device,
+};
+
+/* Here follows a list of all hw resources that the platform devices
+ * allocate. Note, clock dependencies are not included
+ */
+
+static struct resource gpio_resources[] = {
+	{
+		.start = U300_GPIO_BASE,
+		.end   = (U300_GPIO_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "gpio0",
+		.start = IRQ_U300_GPIO_PORT0,
+		.end   = IRQ_U300_GPIO_PORT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio1",
+		.start = IRQ_U300_GPIO_PORT1,
+		.end   = IRQ_U300_GPIO_PORT1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio2",
+		.start = IRQ_U300_GPIO_PORT2,
+		.end   = IRQ_U300_GPIO_PORT2,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name  = "gpio3",
+		.start = IRQ_U300_GPIO_PORT3,
+		.end   = IRQ_U300_GPIO_PORT3,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio4",
+		.start = IRQ_U300_GPIO_PORT4,
+		.end   = IRQ_U300_GPIO_PORT4,
+		.flags = IORESOURCE_IRQ,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name  = "gpio5",
+		.start = IRQ_U300_GPIO_PORT5,
+		.end   = IRQ_U300_GPIO_PORT5,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "gpio6",
+		.start = IRQ_U300_GPIO_PORT6,
+		.end   = IRQ_U300_GPIO_PORT6,
+		.flags = IORESOURCE_IRQ,
+	},
+#endif /* CONFIG_MACH_U300_BS335 */
+#endif /* U300_COH901571_3 */
+};
+
+static struct resource keypad_resources[] = {
+	{
+		.start = U300_KEYPAD_BASE,
+		.end   = U300_KEYPAD_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "coh901461-press",
+		.start = IRQ_U300_KEYPAD_KEYBF,
+		.end   = IRQ_U300_KEYPAD_KEYBF,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "coh901461-release",
+		.start = IRQ_U300_KEYPAD_KEYBR,
+		.end   = IRQ_U300_KEYPAD_KEYBR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start = U300_RTC_BASE,
+		.end   = U300_RTC_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_RTC,
+		.end   = IRQ_U300_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
+ * but these are not yet used by the driver.
+ */
+static struct resource fsmc_resources[] = {
+	{
+		.start = U300_NAND_IF_PHYS_BASE,
+		.end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct resource i2c0_resources[] = {
+	{
+		.start = U300_I2C0_BASE,
+		.end   = U300_I2C0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C0,
+		.end   = IRQ_U300_I2C0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c1_resources[] = {
+	{
+		.start = U300_I2C1_BASE,
+		.end   = U300_I2C1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_I2C1,
+		.end   = IRQ_U300_I2C1,
+		.flags = IORESOURCE_IRQ,
+	},
+
+};
+
+static struct resource wdog_resources[] = {
+	{
+		.start = U300_WDOG_BASE,
+		.end   = U300_WDOG_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_WDOG,
+		.end   = IRQ_U300_WDOG,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* TODO: These should be protected by suitable #ifdef's */
+static struct resource ave_resources[] = {
+	{
+		.name  = "AVE3e I/O Area",
+		.start = U300_VIDEOENC_BASE,
+		.end   = U300_VIDEOENC_BASE + SZ_512K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e IRQ0",
+		.start = IRQ_U300_VIDEO_ENC_0,
+		.end   = IRQ_U300_VIDEO_ENC_0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e IRQ1",
+		.start = IRQ_U300_VIDEO_ENC_1,
+		.end   = IRQ_U300_VIDEO_ENC_1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "AVE3e Physmem Area",
+		.start = 0, /* 0 will be remapped to reserved memory */
+		.end   = SZ_1M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	/*
+	 * The AVE3e requires two regions of 256MB that it considers
+	 * "invisible". The hardware will not be able to access these
+	 * adresses, so they should never point to system RAM.
+	 */
+	{
+		.name  = "AVE3e Reserved 0",
+		.start = 0xd0000000,
+		.end   = 0xd0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "AVE3e Reserved 1",
+		.start = 0xe0000000,
+		.end   = 0xe0000000 + SZ_256M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device wdog_device = {
+	.name = "wdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(wdog_resources),
+	.resource = wdog_resources,
+};
+
+static struct platform_device i2c0_device = {
+	.name = "stddci2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(i2c0_resources),
+	.resource = i2c0_resources,
+};
+
+static struct platform_device i2c1_device = {
+	.name = "stddci2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(i2c1_resources),
+	.resource = i2c1_resources,
+};
+
+static struct platform_device gpio_device = {
+	.name = "u300-gpio",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(gpio_resources),
+	.resource = gpio_resources,
+};
+
+static struct platform_device keypad_device = {
+	.name = "keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(keypad_resources),
+	.resource = keypad_resources,
+};
+
+static struct platform_device rtc_device = {
+	.name = "rtc0",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rtc_resources),
+	.resource = rtc_resources,
+};
+
+static struct platform_device fsmc_device = {
+	.name = "nandif",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(fsmc_resources),
+	.resource = fsmc_resources,
+};
+
+static struct platform_device ave_device = {
+	.name = "video_enc",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(ave_resources),
+	.resource = ave_resources,
+};
+
+/*
+ * Notice that AMBA devices are initialized before platform devices.
+ *
+ */
+static struct platform_device *platform_devs[] __initdata = {
+	&i2c0_device,
+	&i2c1_device,
+	&keypad_device,
+	&rtc_device,
+	&gpio_device,
+	&fsmc_device,
+	&wdog_device,
+	&ave_device
+};
+
+
+/*
+ * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
+ * together so some interrupts are connected to the first one and some
+ * to the second one.
+ */
+void __init u300_init_irq(void)
+{
+	u32 mask[2] = {0, 0};
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++)
+		set_bit(i, (unsigned long *) &mask[0]);
+	u300_enable_intcon_clock();
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+}
+
+
+/*
+ * U300 platforms peripheral handling
+ */
+struct db_chip {
+	u16 chipid;
+	const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+	{
+		.chipid = 0xb800,
+		.name = "DB3000",
+	},
+	{
+		.chipid = 0xc000,
+		.name = "DB3100",
+	},
+	{
+		.chipid = 0xc800,
+		.name = "DB3150",
+	},
+	{
+		.chipid = 0xd800,
+		.name = "DB3200",
+	},
+	{
+		.chipid = 0xe000,
+		.name = "DB3250",
+	},
+	{
+		.chipid = 0xe800,
+		.name = "DB3210",
+	},
+	{
+		.chipid = 0xf000,
+		.name = "DB3350 P1x",
+	},
+	{
+		.chipid = 0xf100,
+		.name = "DB3350 P2x",
+	},
+	{
+		.chipid = 0x0000, /* List terminator */
+		.name = NULL,
+	}
+};
+
+static void u300_init_check_chip(void)
+{
+
+	u16 val;
+	struct db_chip *chip;
+	const char *chipname;
+	const char unknown[] = "UNKNOWN";
+
+	/* Read out and print chip ID */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+	/* This is in funky bigendian order... */
+	val = (val & 0xFFU) << 8 | (val >> 8);
+	chip = db_chips;
+	chipname = unknown;
+
+	for ( ; chip->chipid; chip++) {
+		if (chip->chipid == (val & 0xFF00U)) {
+			chipname = chip->name;
+			break;
+		}
+	}
+	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+	       "(chip ID 0x%04x)\n", chipname, val);
+
+#ifdef CONFIG_MACH_U300_BS26
+	if ((val & 0xFF00U) != 0xc800) {
+		printk(KERN_ERR "Platform configured for BS25/BS26 " \
+		       "with DB3150 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS330
+	if ((val & 0xFF00U) != 0xd800) {
+		printk(KERN_ERR "Platform configured for BS330 " \
+		       "with DB3200 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       " with DB3350 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+	if ((val & 0xFF00U) != 0xe800) {
+		printk(KERN_ERR "Platform configured for BS365 " \
+		       "with DB3210 but %s detected, expect problems!",
+		       chipname);
+	}
+#endif
+
+
+}
+
+/*
+ * Some devices and their resources require reserved physical memory from
+ * the end of the available RAM. This function traverses the list of devices
+ * and assigns actual adresses to these.
+ */
+static void __init u300_assign_physmem(void)
+{
+	unsigned long curr_start = __pa(high_memory);
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
+		for (j = 0; j < platform_devs[i]->num_resources; j++) {
+			struct resource *const res =
+			  &platform_devs[i]->resource[j];
+
+			if (IORESOURCE_MEM == res->flags &&
+				     0 == res->start) {
+				res->start  = curr_start;
+				res->end   += curr_start;
+				curr_start += (res->end - res->start + 1);
+
+				printk(KERN_INFO "core.c: Mapping RAM " \
+				       "%#x-%#x to device %s:%s\n",
+					res->start, res->end,
+				       platform_devs[i]->name, res->name);
+			}
+		}
+	}
+}
+
+void __init u300_init_devices(void)
+{
+	int i;
+	u16 val;
+
+	/* Check what platform we run and print some status information */
+	u300_init_check_chip();
+
+	/* Set system to run at PLL208, max performance, a known state. */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+	/* Wait for the PLL208 to lock if not locked in yet */
+	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+	/* Register the AMBA devices in the AMBA bus abstraction layer */
+	u300_clock_primecells();
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+	u300_unclock_primecells();
+
+	u300_assign_physmem();
+
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
+	/*
+	 * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
+	 * both subsystems are requesting this mode.
+	 * If we not share the Acc SDRAM, this is never the case. Therefore
+	 * enable it here from the App side.
+	 */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
+}
+
+static int core_module_init(void)
+{
+	/*
+	 * This needs to be initialized later: it needs the input framework
+	 * to be initialized first.
+	 */
+	return mmc_init(&mmcsd_device);
+}
+module_init(core_module_init);
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
new file mode 100644
index 00000000000..308cdb197a9
--- /dev/null
+++ b/arch/arm/mach-u300/gpio.c
@@ -0,0 +1,703 @@
+/*
+ *
+ * arch/arm/mach-u300/gpio.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 GPIO module.
+ * This can driver either of the two basic GPIO cores
+ * available in the U300 platforms:
+ * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
+ * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
+ * Notice that you also have inline macros in <asm-arch/gpio.h>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+/* Need access to SYSCON registers for PADmuxing */
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Reference to GPIO block clock */
+static struct clk *clk;
+
+/* Memory resource */
+static struct resource *memres;
+static void __iomem *virtbase;
+static struct device *gpiodev;
+
+struct u300_gpio_port {
+	const char *name;
+	int irq;
+	int number;
+};
+
+
+static struct u300_gpio_port gpio_ports[] = {
+	{
+		.name = "gpio0",
+		.number = 0,
+	},
+	{
+		.name = "gpio1",
+		.number = 1,
+	},
+	{
+		.name = "gpio2",
+		.number = 2,
+	},
+#ifdef U300_COH901571_3
+	{
+		.name = "gpio3",
+		.number = 3,
+	},
+	{
+		.name = "gpio4",
+		.number = 4,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.name = "gpio5",
+		.number = 5,
+	},
+	{
+		.name = "gpio6",
+		.number = 6,
+	},
+#endif
+#endif
+
+};
+
+
+#ifdef U300_COH901571_3
+
+/* Default input value */
+#define DEFAULT_OUTPUT_LOW   0
+#define DEFAULT_OUTPUT_HIGH  1
+
+/* GPIO Pull-Up status */
+#define DISABLE_PULL_UP  0
+#define ENABLE_PULL_UP  1
+
+#define GPIO_NOT_USED 0
+#define GPIO_IN       1
+#define GPIO_OUT      2
+
+struct u300_gpio_configuration_data {
+	unsigned char pin_usage;
+	unsigned char default_output_value;
+	unsigned char pull_up;
+};
+
+/* Initial configuration */
+const struct u300_gpio_configuration_data
+u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
+#ifdef CONFIG_MACH_U300_BS335
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 5, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 6, pind 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	}
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+	/* Port 0, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 1, pins 0-7 */
+	{
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+	},
+	/* Port 2, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 3, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	},
+	/* Port 4, pins 0-7 */
+	{
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		/* These 4 pins doesn't exist on DB3210 */
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+	}
+#endif
+};
+#endif
+
+
+/* No users == we can power down GPIO */
+static int gpio_users;
+
+struct gpio_struct {
+	int (*callback)(void *);
+	void *data;
+	int users;
+};
+
+static struct gpio_struct gpio_pin[U300_GPIO_MAX];
+
+/*
+ * Let drivers register callback in order to get notified when there is
+ * an interrupt on the gpio pin
+ */
+int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+{
+	if (gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "registered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = func;
+	gpio_pin[gpio].data = data;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_register_callback);
+
+int gpio_unregister_callback(unsigned gpio)
+{
+	if (!gpio_pin[gpio].callback)
+		dev_warn(gpiodev, "%s: WARNING: callback already "
+			 "unregistered for gpio pin#%d\n", __func__, gpio);
+	gpio_pin[gpio].callback = NULL;
+	gpio_pin[gpio].data = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_unregister_callback);
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio_pin[gpio].users)
+		return -EINVAL;
+	else
+		gpio_pin[gpio].users++;
+
+	gpio_users++;
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	gpio_users--;
+	gpio_pin[gpio].users--;
+	if (unlikely(gpio_pin[gpio].users < 0)) {
+		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
+			 gpio);
+		gpio_pin[gpio].users = 0;
+	}
+
+	return;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* This returns zero or nonzero */
+int gpio_get_value(unsigned gpio)
+{
+	return readl(virtbase + U300_GPIO_PXPDIR +
+	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+/*
+ * We hope that the compiler will optimize away the unused branch
+ * in case "value" is a constant
+ */
+void gpio_set_value(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		/* set */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val | (1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		/* clear */
+		val = readl(virtbase + U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+		  & (1 << (gpio & 0x07));
+		writel(val & ~(1 << (gpio & 0x07)), virtbase +
+		  U300_GPIO_PXPDOR +
+		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin*/
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/* This is not needed since it sets the bits to zero.*/
+	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (gpio > U300_GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask out this pin */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	/*
+	 * FIXME: configure for push/pull, open drain or open source per pin
+	 * in setup. The current driver will only support push/pull.
+	 */
+	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((gpio & 0x07) << 1));
+	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	gpio_set_value(gpio, value);
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
+ */
+void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+{
+	u32 val;
+	unsigned long flags;
+	local_irq_save(flags);
+
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val |= (1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	if (edge)
+		val |= (1 << (gpio & 0x07));
+	else
+		val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(enable_irq_on_gpio_pin);
+
+void disable_irq_on_gpio_pin(unsigned gpio)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	val &= ~(1 << (gpio & 0x07));
+	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+				U300_GPIO_PORTX_SPACING);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(disable_irq_on_gpio_pin);
+
+/* Enable (value == 0) or disable (value == 1) internal pullup */
+void gpio_pullup(unsigned gpio, int value)
+{
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value) {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	} else {
+		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+					U300_GPIO_PORTX_SPACING);
+		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pullup);
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+	struct u300_gpio_port *port = dev_id;
+	u32 val;
+	int pin;
+
+	/* Read event register */
+	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask with enable register */
+	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Mask relevant bits */
+	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+	/* ACK IRQ (clear event) */
+	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
+				U300_GPIO_PORTX_SPACING);
+	/* Print message */
+	while (val != 0) {
+		unsigned gpio;
+
+		pin = __ffs(val);
+		/* mask off this pin */
+		val &= ~(1 << pin);
+		gpio = (port->number << 3) + pin;
+
+		if (gpio_pin[gpio].callback)
+			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
+		else
+			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
+			       gpio);
+	}
+	return IRQ_HANDLED;
+}
+
+static void gpio_set_initial_values(void)
+{
+#ifdef U300_COH901571_3
+	int i, j;
+	unsigned long flags;
+	u32 val;
+
+	/* Write default values to all pins */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+
+	/*
+	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
+	 * to output and 'GPIO_IN' to input for each port. And initalize
+	 * default value on outputs.
+	 */
+	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
+			local_irq_save(flags);
+			val = readl(virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			/* Mask out this pin */
+			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+
+			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
+				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
+			writel(val, virtbase + U300_GPIO_PXPCR +
+					 i * U300_GPIO_PORTX_SPACING);
+			local_irq_restore(flags);
+		}
+	}
+
+	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
+	for (i = 0; i < U300_GPIO_MAX; i++) {
+		val = 0;
+		for (j = 0; j < 8; j++)
+			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+		local_irq_save(flags);
+		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
+		local_irq_restore(flags);
+	}
+#endif
+}
+
+static int __init gpio_probe(struct platform_device *pdev)
+{
+	u32 val;
+	int err = 0;
+	int i;
+	int num_irqs;
+
+	gpiodev = &pdev->dev;
+	memset(gpio_pin, 0, sizeof(gpio_pin));
+
+	/* Get GPIO clock */
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(gpiodev, "could not get GPIO clock\n");
+		goto err_no_clk;
+	}
+	err = clk_enable(clk);
+	if (err) {
+		dev_err(gpiodev, "could not enable GPIO clock\n");
+		goto err_no_clk_enable;
+	}
+
+	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memres)
+		goto err_no_resource;
+
+	if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
+	    == NULL) {
+		err = -ENODEV;
+		goto err_no_ioregion;
+	}
+
+	virtbase = ioremap(memres->start, resource_size(memres));
+	if (!virtbase) {
+		err = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	dev_info(gpiodev, "remapped 0x%08x to %p\n",
+		 memres->start, virtbase);
+
+#ifdef U300_COH901335
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
+	/* Turn on the GPIO block */
+	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+#ifdef U300_COH901571_3
+	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
+	val = readl(virtbase + U300_GPIO_CR);
+	dev_info(gpiodev, "COH901571/3 block version: %d, " \
+	       "number of cores: %d\n",
+	       ((val & 0x0000FE00) >> 9),
+	       ((val & 0x000001FC) >> 2));
+	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+	/* Set up some padmuxing here */
+#ifdef CONFIG_MMC
+	pmx_set_mission_mode_mmc();
+#endif
+#ifdef CONFIG_SPI_PL022
+	pmx_set_mission_mode_spi();
+#endif
+
+	gpio_set_initial_values();
+
+	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
+
+		gpio_ports[num_irqs].irq =
+			platform_get_irq_byname(pdev,
+						gpio_ports[num_irqs].name);
+
+		err = request_irq(gpio_ports[num_irqs].irq,
+				  gpio_irq_handler, IRQF_DISABLED,
+				  gpio_ports[num_irqs].name,
+				  &gpio_ports[num_irqs]);
+		if (err) {
+			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
+				gpio_ports[num_irqs].name);
+			goto err_no_irq;
+		}
+		/* Turns off PortX_irq_force */
+		writel(0x0, virtbase + U300_GPIO_PXIFR +
+				 num_irqs * U300_GPIO_PORTX_SPACING);
+	}
+
+	return 0;
+
+ err_no_irq:
+	for (i = 0; i < num_irqs; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+ err_no_ioremap:
+	release_mem_region(memres->start, memres->end - memres->start);
+ err_no_ioregion:
+ err_no_resource:
+	clk_disable(clk);
+ err_no_clk_enable:
+	clk_put(clk);
+ err_no_clk:
+	dev_info(gpiodev, "module ERROR:%d\n", err);
+	return err;
+}
+
+static int __exit gpio_remove(struct platform_device *pdev)
+{
+	int i;
+
+	/* Turn off the GPIO block */
+	writel(0x00000000U, virtbase + U300_GPIO_CR);
+	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
+		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+	iounmap(virtbase);
+	release_mem_region(memres->start, memres->end - memres->start);
+	clk_disable(clk);
+	clk_put(clk);
+	return 0;
+}
+
+static struct platform_driver gpio_driver = {
+	.driver		= {
+		.name	= "u300-gpio",
+	},
+	.remove		= __exit_p(gpio_remove),
+};
+
+
+static int __init u300_gpio_init(void)
+{
+	return platform_driver_probe(&gpio_driver, gpio_probe);
+}
+
+static void __exit u300_gpio_exit(void)
+{
+	platform_driver_unregister(&gpio_driver);
+}
+
+arch_initcall(u300_gpio_init);
+module_exit(u300_gpio_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+
+#ifdef U300_COH901571_3
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
+#endif
+
+#ifdef U300_COH901335
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h
new file mode 100644
index 00000000000..92e3cc872c6
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
new file mode 100644
index 00000000000..f3a1cbbeeab
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/debug-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugging macro include header.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+
+	.macro	addruart,rx
+	/* If we move the adress using MMU, use this. */
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ MMU enabled?
+	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+	ldrne	\rx,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+	orr	\rx, \rx, #0x00003000
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
new file mode 100644
index 00000000000..20731ae39d3
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/entry-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level IRQ helper macros for ST-Ericsson U300
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #0
+	teq	\irqstat, #0
+	bne	1002f
+1001:	ldr	\base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
+	ldr	\irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+	mov	\irqnr, #32
+	teq	\irqstat, #0
+	beq	1003f
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+	.endm
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
new file mode 100644
index 00000000000..c8174128d7e
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -0,0 +1,290 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/gpio.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_H
+#define __MACH_U300_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+/* Switch type depending on platform/chip variant */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_COH901335
+#endif
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
+#define U300_COH901571_3
+#endif
+
+/* Get base address for regs here */
+#include "u300-regs.h"
+/* IRQ numbers */
+#include "irqs.h"
+
+/*
+ * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
+ * used for anything, and often is. The event/enable etc figures are for
+ * the lowermost pin (pin 0 on each port), shift this left to match your
+ * pin if you're gonna use these values.
+ */
+#ifdef U300_COH901335
+#define U300_GPIO_PORTX_SPACING				(0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_GPIO_PXPDIR				(0x00)
+#define U300_GPIO_PXPDOR				(0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x04)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x08)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x0C)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x10)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x14)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x18)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_GPIO_CR					(0x54)
+#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
+/* three ports of 8 bits each = GPIO pins 0..23 */
+#define U300_GPIO_NUM_PORTS 3
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX	(U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+#ifdef U300_COH901571_3
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2  (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_GPIO_CR					(0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE			(0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
+#define U300_GPIO_PORTX_SPACING				(0x30)
+/* Port X Pin Data INPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDIR				(0x04)
+/* Port X Pin Data OUTPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDOR				(0x08)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR					(0x0C)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER					(0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV					(0x14)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN					(0x18)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR					(0x1C)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR					(0x20)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+#ifdef CONFIG_MACH_U300_BS335
+/* seven ports of 8 bits each = GPIO pins 0..55 */
+#define U300_GPIO_NUM_PORTS 7
+#else
+/* five ports of 8 bits each = GPIO pins 0..39 */
+#define U300_GPIO_NUM_PORTS 5
+#endif
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
+#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP		4
+#define U300_GPIO_PIN_CAM_REG_EN	5
+#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
+#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+    defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_UART_CTS		2
+#define U300_GPIO_PIN_UART_RTS		3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY	4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05		5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD		6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07		7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08		8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09		9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10		10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY	13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14		14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE		17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18		18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19		19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24		24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25		25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26		26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27		27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28		28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29		29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30		30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31		31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32		32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33		33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34		34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35		35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36		36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37		37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43		43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44		44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45		45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46		46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47		47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48		48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49		49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50		50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51		51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52		52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
+#endif
+
+#endif
+
+/* translates a pin number to a port number */
+#define PIN_TO_PORT(val) (val >> 3)
+
+/* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+extern int gpio_register_callback(unsigned gpio,
+				  int (*func)(void *arg),
+				  void *);
+extern int gpio_unregister_callback(unsigned gpio);
+extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
+extern void disable_irq_on_gpio_pin(unsigned gpio);
+extern void gpio_pullup(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern void gpio_set_value(unsigned gpio, int value);
+
+/* wrappers to sleep-enable the previous two functions */
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	/*
+	 * FIXME: This is no 1-1 mapping at all, it points to the
+	 * whole block of 8 pins.
+	 */
+	return (irq - IRQ_U300_GPIO_PORT0) << 3;
+}
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h
new file mode 100644
index 00000000000..b99d4ce0ac2
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-u300/include/mach/hardware.h
+ */
+#include <asm/sizes.h>
+#include <mach/u300-regs.h>
diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h
new file mode 100644
index 00000000000..5d6b4c13b3a
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/io.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Dummy IO map for being able to use writew()/readw(),
+ * writel()/readw() and similar accessor functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
new file mode 100644
index 00000000000..a6867b12773
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -0,0 +1,114 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/irqs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * IRQ channel definitions for the U300 platforms.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_U300_INTCON0_START		0
+#define IRQ_U300_INTCON1_START		32
+/* These are on INTCON0 - 30 lines */
+#define IRQ_U300_IRQ0_EXT		0
+#define IRQ_U300_IRQ1_EXT		1
+#define IRQ_U300_DMA			2
+#define IRQ_U300_VIDEO_ENC_0		3
+#define IRQ_U300_VIDEO_ENC_1		4
+#define IRQ_U300_AAIF_RX		5
+#define IRQ_U300_AAIF_TX		6
+#define IRQ_U300_AAIF_VGPIO		7
+#define IRQ_U300_AAIF_WAKEUP		8
+#define IRQ_U300_PCM_I2S0_FRAME		9
+#define IRQ_U300_PCM_I2S0_FIFO		10
+#define IRQ_U300_PCM_I2S1_FRAME		11
+#define IRQ_U300_PCM_I2S1_FIFO		12
+#define IRQ_U300_XGAM_GAMCON		13
+#define IRQ_U300_XGAM_CDI		14
+#define IRQ_U300_XGAM_CDICON		15
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+/* MMIACC not used on the DB3210 or DB3350 chips */
+#define IRQ_U300_XGAM_MMIACC		16
+#endif
+#define IRQ_U300_XGAM_PDI		17
+#define IRQ_U300_XGAM_PDICON		18
+#define IRQ_U300_XGAM_GAMEACC		19
+#define IRQ_U300_XGAM_MCIDCT		20
+#define IRQ_U300_APEX			21
+#define IRQ_U300_UART0			22
+#define IRQ_U300_SPI			23
+#define IRQ_U300_TIMER_APP_OS		24
+#define IRQ_U300_TIMER_APP_DD		25
+#define IRQ_U300_TIMER_APP_GP1		26
+#define IRQ_U300_TIMER_APP_GP2		27
+#define IRQ_U300_TIMER_OS		28
+#define IRQ_U300_TIMER_MS		29
+#define IRQ_U300_KEYPAD_KEYBF		30
+#define IRQ_U300_KEYPAD_KEYBR		31
+/* These are on INTCON1 - 32 lines */
+#define IRQ_U300_GPIO_PORT0		32
+#define IRQ_U300_GPIO_PORT1		33
+#define IRQ_U300_GPIO_PORT2		34
+
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
+    defined(CONFIG_MACH_U300_BS335)
+/* These are for DB3150, DB3200 and DB3350 */
+#define IRQ_U300_WDOG			35
+#define IRQ_U300_EVHIST			36
+#define IRQ_U300_MSPRO			37
+#define IRQ_U300_MMCSD_MCIINTR0		38
+#define IRQ_U300_MMCSD_MCIINTR1		39
+#define IRQ_U300_I2C0			40
+#define IRQ_U300_I2C1			41
+#define IRQ_U300_RTC			42
+#define IRQ_U300_NFIF			43
+#define IRQ_U300_NFIF2			44
+#endif
+
+/* DB3150 and DB3200 have only 45 IRQs */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_NR_IRQS			45
+#endif
+
+/* The DB3350-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS335
+#define IRQ_U300_ISP_F0			45
+#define IRQ_U300_ISP_F1			46
+#define IRQ_U300_ISP_F2			47
+#define IRQ_U300_ISP_F3			48
+#define IRQ_U300_ISP_F4			49
+#define IRQ_U300_GPIO_PORT3		50
+#define IRQ_U300_SYSCON_PLL_LOCK	51
+#define IRQ_U300_UART1			52
+#define IRQ_U300_GPIO_PORT4		53
+#define IRQ_U300_GPIO_PORT5		54
+#define IRQ_U300_GPIO_PORT6		55
+#define U300_NR_IRQS			56
+#endif
+
+/* The DB3210-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS365
+#define IRQ_U300_GPIO_PORT3		35
+#define IRQ_U300_GPIO_PORT4		36
+#define IRQ_U300_WDOG			37
+#define IRQ_U300_EVHIST			38
+#define IRQ_U300_MSPRO			39
+#define IRQ_U300_MMCSD_MCIINTR0		40
+#define IRQ_U300_MMCSD_MCIINTR1		41
+#define IRQ_U300_I2C0			42
+#define IRQ_U300_I2C1			43
+#define IRQ_U300_RTC			44
+#define IRQ_U300_NFIF			45
+#define IRQ_U300_NFIF2			46
+#define IRQ_U300_SYSCON_PLL_LOCK	47
+#define U300_NR_IRQS			48
+#endif
+
+#define NR_IRQS U300_NR_IRQS
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
new file mode 100644
index 00000000000..bf134bcc129
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/memory.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Memory virtual/physical mapping constants.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#ifdef CONFIG_MACH_U300_DUAL_RAM
+
+#define PHYS_OFFSET		UL(0x48000000)
+#define BOOT_PARAMS_OFFSET	(PHYS_OFFSET + 0x100)
+
+#else
+
+#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#else
+#define PHYS_OFFSET (0x28000000 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE +	\
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#endif
+#define BOOT_PARAMS_OFFSET (0x28000000 + \
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE +		\
+	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
+#endif
+
+/*
+ * We enable a real big DMA buffer if need be.
+ */
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
new file mode 100644
index 00000000000..77d9210a82e
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/platform.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic platform init and mapping functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+void u300_map_io(void);
+void u300_init_irq(void);
+void u300_init_devices(void);
+extern struct sys_timer u300_timer;
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
new file mode 100644
index 00000000000..1c90d1b1ccb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -0,0 +1,644 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/syscon.h
+ *
+ *
+ * Copyright (C) 2008 ST-Ericsson AB
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifndef __MACH_SYSCON_H
+#define __MACH_SYSCON_H
+
+/*
+ * All register defines for SYSCON registers that concerns individual
+ * block clocks and reset lines are registered here. This is because
+ * we don't want any other file to try to fool around with this stuff.
+ */
+
+/* APP side SYSCON registers */
+/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
+/* CLK Control Register 16bit (R/W) */
+#define U300_SYSCON_CCR						(0x0000)
+#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
+#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
+#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
+/* CLK Status Register 16bit (R/W) */
+#define U300_SYSCON_CSR						(0x0004)
+#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
+#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
+/* Reset lines for SLOW devices 16bit (R/W) */
+#define U300_SYSCON_RSR						(0x0014)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
+#endif
+#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
+#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
+#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
+#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
+#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
+#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
+#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
+#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
+#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
+/* Reset lines for FAST devices 16bit (R/W) */
+#define U300_SYSCON_RFR						(0x0018)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
+#endif
+#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
+#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
+#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
+#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
+#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
+#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
+#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
+/* Reset lines for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_RRR						(0x001c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
+#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
+#endif
+#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
+#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
+#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
+#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
+#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
+#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
+#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
+#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
+#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
+#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
+#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
+/* Clock enable for SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CESR					(0x0020)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
+#endif
+#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
+#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
+#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
+#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
+#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
+#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
+#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
+#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CEFR					(0x0024)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
+#endif
+#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
+#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
+#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
+#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN    			(0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN     			(0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN     			(0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN     			(0x0002)
+#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CERR					(0x0028)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
+#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
+#endif
+#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
+#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
+#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
+#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
+#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
+#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
+#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
+#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
+#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
+#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
+#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
+#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
+/* Single block clock enable 16bit (-/W) */
+#define U300_SYSCON_SBCER					(0x002c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
+#endif
+#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
+#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
+#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
+#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
+#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
+#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
+#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
+#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
+#endif
+#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
+#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
+#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
+#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
+#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
+#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
+#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
+#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
+#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
+#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
+#endif
+#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
+#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
+#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
+#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
+#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
+#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
+#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
+#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
+#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
+#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
+#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
+#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
+/* Single block clock disable 16bit (-/W) */
+#define U300_SYSCON_SBCDR					(0x0030)
+/* Same values as above for SBCER */
+/* Clock force SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CFSR					(0x003c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
+#endif
+#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
+/* Clock force FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CFFR					(0x40)
+/* Values not defined. Define if you want to use them. */
+/* Clock force the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CFRR					(0x44)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
+#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
+#endif
+#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
+#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
+#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
+#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
+#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
+/* PLL208 Frequency Control 16bit (R/W) */
+#define U300_SYSCON_PFCR					(0x48)
+#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR					(0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
+/*
+ * All other clocking registers moved to clock.c!
+ */
+/* Reset Out 16bit (R/W) */
+#define U300_SYSCON_RCR						(0x6c)
+#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
+/* EMIF Slew Rate Control 16bit (R/W) */
+#define U300_SYSCON_SRCLR					(0x70)
+#define U300_SYSCON_SRCLR_MASK					(0x03FF)
+#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
+/* EMIF Clock Control Register 16bit (R/W) */
+#define U300_SYSCON_ECCR					(0x0078)
+#define U300_SYSCON_ECCR_MASK					(0x000F)
+#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
+#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
+#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
+#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
+/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
+#define U300_SYSCON_PMC1LR					(0x007C)
+#define U300_SYSCON_PMC1LR_MASK					(0xFFFF)
+#define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
+#define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
+#define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
+#define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
+#define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
+#define U300_SYSCON_PMC1LR_PDI_WCDMA				(0x3000)
+#define U300_SYSCON_PMC1LR_MMCSD_MASK				(0x0C00)
+#define U300_SYSCON_PMC1LR_MMCSD_MMCSD				(0x0000)
+#define U300_SYSCON_PMC1LR_MMCSD_MSPRO				(0x0400)
+#define U300_SYSCON_PMC1LR_MMCSD_DSP				(0x0800)
+#define U300_SYSCON_PMC1LR_MMCSD_WCDMA				(0x0C00)
+#define U300_SYSCON_PMC1LR_ETM_MASK				(0x0300)
+#define U300_SYSCON_PMC1LR_ETM_ACC				(0x0000)
+#define U300_SYSCON_PMC1LR_ETM_APP				(0x0100)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK			(0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF			(0x0040)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM			(0x0080)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB		(0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK			(0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF			(0x0010)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM			(0x0020)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI			(0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK			(0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF			(0x0004)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM			(0x0008)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI			(0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_MASK				(0x0003)
+#define U300_SYSCON_PMC1LR_EMIF_1_STATIC			(0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0			(0x0001)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1			(0x0002)
+#define U300_SYSCON_PMC1LR_EMIF_1				(0x0003)
+/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
+#define U300_SYSCON_PMC1HR					(0x007E)
+#define U300_SYSCON_PMC1HR_MASK					(0xFFFF)
+#define U300_SYSCON_PMC1HR_MISC_2_MASK				(0xC000)
+#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_MISC_2_MSPRO				(0x4000)
+#define U300_SYSCON_PMC1HR_MISC_2_DSP				(0x8000)
+#define U300_SYSCON_PMC1HR_MISC_2_AAIF				(0xC000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK			(0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF			(0x1000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP			(0x2000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF			(0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK			(0x0C00)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC			(0x0400)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP			(0x0800)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF			(0x0C00)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK			(0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO		(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI			(0x0100)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF			(0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK			(0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO		(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI			(0x0040)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF			(0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK			(0x0030)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI			(0x0010)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP			(0x0020)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF			(0x0030)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK			(0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0			(0x0004)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS			(0x0008)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF			(0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK			(0x0003)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0			(0x0001)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF			(0x0003)
+/* Step one for killing the applications system 16bit (-/W) */
+#define U300_SYSCON_KA1R					(0x0080)
+#define U300_SYSCON_KA1R_MASK					(0xFFFF)
+#define U300_SYSCON_KA1R_VALUE					(0xFFFF)
+/* Step two for killing the application system 16bit (-/W) */
+#define U300_SYSCON_KA2R					(0x0084)
+#define U300_SYSCON_KA2R_MASK					(0xFFFF)
+#define U300_SYSCON_KA2R_VALUE					(0xFFFF)
+/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
+#define U300_SYSCON_MMF0R					(0x90)
+#define U300_SYSCON_MMF0R_MASK					(0x00FF)
+#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
+/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
+#define U300_SYSCON_MMF1R					(0x94)
+#define U300_SYSCON_MMF1R_MASK					(0x00FF)
+#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
+/* AAIF control register 16 bit (R/W) */
+#define U300_SYSCON_AAIFCR					(0x98)
+#define U300_SYSCON_AAIFCR_MASK					(0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK			(0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL			(0x0000)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING			(0x0001)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT			(0x0002)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT			(0x0003)
+/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
+#define U300_SYSCON_MMCR					(0x9C)
+#define U300_SYSCON_MMCR_MASK					(0x0003)
+#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
+#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
+
+/* TODO: More SYSCON registers missing */
+#define U300_SYSCON_PMC3R					(0x10c)
+#define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
+#define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
+/* TODO: Missing other configs, I just added the SPI stuff */
+
+/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
+#define U300_SYSCON_S0CCR					(0x120)
+#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
+#define U300_SYSCON_S1CCR					(0x124)
+#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
+#define U300_SYSCON_S2CCR					(0x128)
+#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
+#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
+#define U300_SYSCON_MCR						(0x12c)
+#define U300_SYSCON_MCR_FIELD_MASK				(0x00FF)
+#define U300_SYSCON_MCR_PMGEN_CR_4_MASK				(0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO				(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_4_SPI				(0x0040)
+#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF				(0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_2_MASK				(0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO				(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC		(0x0010)
+#define U300_SYSCON_MCR_PMGEN_CR_2_DSP				(0x0020)
+#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF				(0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_0_MASK				(0x000C)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1		(0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2		(0x0004)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3		(0x0008)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
+#define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
+#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* Clock activity observability register 0 */
+#define U300_SYSCON_C0OAR					(0x140)
+#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
+#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
+#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
+#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
+#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
+#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
+#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
+#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
+#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
+#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
+#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
+#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
+#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
+#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
+#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
+#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
+#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
+#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
+/* Clock activity observability register 1 */
+#define U300_SYSCON_C1OAR					(0x144)
+#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
+#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
+#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
+#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
+#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
+#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
+#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
+#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
+#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
+#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
+#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
+#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
+#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
+#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
+#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
+/* Clock activity observability register 2 */
+#define U300_SYSCON_C2OAR					(0x148)
+#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
+#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
+#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
+#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
+#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
+#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
+#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
+#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
+#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
+#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR					(0x400)
+/* Video IRQ clear 16bit (R/W) */
+#define U300_SYSCON_VICR					(0x404)
+#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE		(0x0002)
+#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE		(0x0001)
+/* SMCR */
+#define U300_SYSCON_SMCR					(0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK				(0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND			(0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE			(0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE		(0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR					(0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE			(0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR						(0x4f8)
+#define U300_SYSCON_PCR_SERV_IND				(0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR						(0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND		(0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND		(0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
+
+
+/* CPU clock defines */
+/**
+ * CPU high frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_HIGH    208
+/**
+ * CPU medium frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_MEDIUM  104
+/**
+ * CPU low frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_LOW      13
+
+/* EMIF clock defines */
+/**
+ * EMIF high frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_HIGH   104
+/**
+ * EMIF medium frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_MEDIUM 104
+/**
+ * EMIF low frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_LOW     13
+
+/* AHB clock defines */
+/**
+ * AHB high frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_HIGH     52
+/**
+ * AHB medium frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_MEDIUM   52
+/**
+ * AHB low frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_LOW       7  /* i.e 13/2=6.5MHz */
+
+enum syscon_busmaster {
+  SYSCON_BM_DMAC,
+  SYSCON_BM_XGAM,
+  SYSCON_BM_VIDEO_ENC
+};
+
+/*
+ * Note that this array must match the order of the array "clk_reg"
+ * in syscon.c
+ */
+enum syscon_clk {
+  SYSCON_CLKCONTROL_SLOW_BRIDGE,
+  SYSCON_CLKCONTROL_UART,
+  SYSCON_CLKCONTROL_BTR,
+  SYSCON_CLKCONTROL_EH,
+  SYSCON_CLKCONTROL_GPIO,
+  SYSCON_CLKCONTROL_KEYPAD,
+  SYSCON_CLKCONTROL_APP_TIMER,
+  SYSCON_CLKCONTROL_ACC_TIMER,
+  SYSCON_CLKCONTROL_FAST_BRIDGE,
+  SYSCON_CLKCONTROL_I2C0,
+  SYSCON_CLKCONTROL_I2C1,
+  SYSCON_CLKCONTROL_I2S0,
+  SYSCON_CLKCONTROL_I2S1,
+  SYSCON_CLKCONTROL_MMC,
+  SYSCON_CLKCONTROL_SPI,
+  SYSCON_CLKCONTROL_I2S0_CORE,
+  SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_AAIF,
+  SYSCON_CLKCONTROL_AHB,
+  SYSCON_CLKCONTROL_APEX,
+  SYSCON_CLKCONTROL_CPU,
+  SYSCON_CLKCONTROL_DMA,
+  SYSCON_CLKCONTROL_EMIF,
+  SYSCON_CLKCONTROL_NAND_IF,
+  SYSCON_CLKCONTROL_VIDEO_ENC,
+  SYSCON_CLKCONTROL_XGAM,
+  SYSCON_CLKCONTROL_SEMI,
+  SYSCON_CLKCONTROL_AHB_SUBSYS,
+  SYSCON_CLKCONTROL_MSPRO
+};
+
+enum syscon_sysclk_mode {
+  SYSCON_SYSCLK_DISABLED,
+  SYSCON_SYSCLK_M_CLK,
+  SYSCON_SYSCLK_ACC_FSM,
+  SYSCON_SYSCLK_PLL60_48,
+  SYSCON_SYSCLK_PLL60_60,
+  SYSCON_SYSCLK_ACC_PLL208,
+  SYSCON_SYSCLK_APP_PLL13,
+  SYSCON_SYSCLK_APP_FSM,
+  SYSCON_SYSCLK_RTC,
+  SYSCON_SYSCLK_APP_PLL208
+};
+
+enum syscon_sysclk_req {
+  SYSCON_SYSCLKREQ_DISABLED,
+  SYSCON_SYSCLKREQ_ACTIVE_LOW
+};
+
+enum syscon_clk_mode {
+  SYSCON_CLKMODE_OFF,
+  SYSCON_CLKMODE_DEFAULT,
+  SYSCON_CLKMODE_LOW,
+  SYSCON_CLKMODE_MEDIUM,
+  SYSCON_CLKMODE_HIGH,
+  SYSCON_CLKMODE_PERMANENT,
+  SYSCON_CLKMODE_ON,
+};
+
+enum syscon_call_mode {
+  SYSCON_CLKCALL_NOWAIT,
+  SYSCON_CLKCALL_WAIT,
+};
+
+int syscon_dc_on(bool keep_power_on);
+int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
+				      bool active);
+bool syscon_get_busmaster_active_state(void);
+int syscon_set_sleep_mask(enum syscon_clk,
+			  bool sleep_ctrl);
+int syscon_config_sysclk(u32 sysclk,
+			 enum syscon_sysclk_mode sysclkmode,
+			 bool inverse,
+			 u32 divisor,
+			 enum syscon_sysclk_req sysclkreq);
+bool syscon_can_turn_off_semi_clock(void);
+
+/* This function is restricted to core.c */
+int syscon_request_normal_power(bool req);
+
+/* This function is restricted to be used by platform_speed.c */
+int syscon_speed_request(enum syscon_call_mode wait_mode,
+			 enum syscon_clk_mode req_clk_mode);
+#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
new file mode 100644
index 00000000000..8daf13634ce
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/system.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * System shutdown and reset functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
+		/* Disable interrupts */
+		local_irq_disable();
+#ifdef CONFIG_COH901327_WATCHDOG
+		coh901327_watchdog_reset();
+#endif
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+	/* Wait for system do die/reset. */
+	while (1);
+}
diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h
new file mode 100644
index 00000000000..f233b72633f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/timex.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform tick rate definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+/* This is for the APP OS GP1 (General Purpose 1) timer */
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
new file mode 100644
index 00000000000..88333dfb19f
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -0,0 +1,187 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/u300-regs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic register address definitions in physical memory and
+ * some block defintions for core devices like the timer.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_REGS_H
+#define __MACH_U300_REGS_H
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE		0x80000000
+#define U300_NAND_CS0_VIRT_BASE		0xff040000
+
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE		0x9f800000
+#define U300_NAND_IF_VIRT_BASE		0xff030000
+
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE		0xa0000000
+#define U300_AHB_PER_VIRT_BASE		0xff010000
+
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE		0xc0000000
+#define U300_FAST_PER_VIRT_BASE		0xff020000
+
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE		0xc0010000
+#define U300_SLOW_PER_VIRT_BASE		0xff000000
+
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE		0xffff0000
+#define U300_BOOTROM_VIRT_BASE		0xffff0000
+
+/* SEMI config base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SEMI_CONFIG_BASE		0x2FFE0000
+#else
+#define U300_SEMI_CONFIG_BASE		0x30000000
+#endif
+
+/*
+ * All the following peripherals are specified at their PHYSICAL address,
+ * so if you need to access them (in the kernel), you MUST use the macros
+ * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
+ * etc.
+ */
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
+
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE		(U300_AHB_PER_VIRT_BASE+0x1000)
+
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE		(U300_AHB_PER_VIRT_BASE+0x2000)
+
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
+
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
+
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
+
+/* MMC/SD controller */
+#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
+
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
+
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
+
+/* I2C0 controller */
+#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
+
+/* I2C1 controller */
+#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
+
+/* SPI controller */
+#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
+
+#ifdef CONFIG_MACH_U300_BS335
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+#endif
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
+
+/* SYSCON */
+#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE		(U300_SLOW_PER_VIRT_BASE+0x1000)
+
+/* Watchdog */
+#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
+
+/* UART0 */
+#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
+
+/* APP side special timer */
+#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE		(U300_SLOW_PER_VIRT_BASE+0x4000)
+
+/* Keypad */
+#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
+
+/* GPIO */
+#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
+
+/* RTC */
+#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+
+/* Bus tracer */
+#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
+
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
+
+/* Genric Timer */
+#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
+
+/* PPM */
+#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
+
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) is only available in U335 */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_ISP_BASE			(0xA0008000)
+#endif
+
+/* DMA Controller base */
+#define U300_DMAC_BASE			(0xC0020000)
+
+/* MSL Base */
+#define U300_MSL_BASE			(0xc0022000)
+
+/* APEX Base */
+#define U300_APEX_BASE			(0xc0030000)
+
+/* Video Encoder Base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_VIDEOENC_BASE		(0xc0080000)
+#else
+#define U300_VIDEOENC_BASE		(0xc0040000)
+#endif
+
+/* XGAM Base */
+#define U300_XGAM_BASE			(0xd0000000)
+
+/*
+ * Virtual accessor macros for static devices
+ */
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-u300/include/mach/uncompress.h
index 46d4ca91af7..29acb718acf 100644
--- a/arch/arm/mach-imx/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/uncompress.h
@@ -1,8 +1,7 @@
 /*
- *  arch/arm/mach-imxads/include/mach/system.h
+ * arch/arm/mach-u300/include/mach/uncompress.h
  *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2003 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,23 +17,30 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
+#define AMBA_UART_DR	(*(volatile unsigned char *)0xc0013000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0xc001302C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0xc0013030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0xc0013018)
 
-static void
-arch_idle(void)
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
 {
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
 }
 
-static inline void
-arch_reset(char mode, const char *cmd)
+static inline void flush(void)
 {
-	cpu_reset(0);
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
 }
 
-#endif
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
new file mode 100644
index 00000000000..b00c51a66fb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/vmalloc.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Virtual memory allocations
+ * End must be above the I/O registers and on an even 2MiB boundary.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
new file mode 100644
index 00000000000..3138d3955c9
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.c
@@ -0,0 +1,216 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Johan Lundin <johan.lundin@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/mmc/host.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/mmc.h>
+#include "mmc.h"
+
+struct mmci_card_event {
+	struct input_dev *mmc_input;
+	int mmc_inserted;
+	struct work_struct workq;
+	struct mmc_platform_data mmc0_plat_data;
+};
+
+static unsigned int mmc_status(struct device *dev)
+{
+	struct mmci_card_event *mmci_card = container_of(
+		dev->platform_data,
+		struct mmci_card_event, mmc0_plat_data);
+
+	return mmci_card->mmc_inserted;
+}
+
+/*
+ * Here follows a large chunk of code which will only be enabled if you
+ * have both the AB3100 chip mounted and the MMC subsystem activated.
+ */
+
+static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
+{
+	int v;
+
+	/*
+	 * MMC Spec:
+	 * bit 7:	1.70 - 1.95V
+	 * bit 8 - 14:	2.0 - 2.6V
+	 * bit 15 - 23:	2.7 - 3.6V
+	 *
+	 * ab3100 voltages:
+	 * 000 - 2.85V
+	 * 001 - 2.75V
+	 * 010 - 1.8V
+	 * 011 - 1.5V
+	 */
+	switch (voltage) {
+	case 8:
+		v = 3;
+		break;
+	case 9:
+	case 10:
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+		v = 1;
+		break;
+	case 16:
+		v = 1;
+		break;
+	case 17:
+	case 18:
+	case 19:
+	case 20:
+	case 21:
+	case 22:
+	case 23:
+	case 24:
+		v = 0;
+		break;
+	default:
+		v = 0;
+		break;
+	}
+
+	/* PL180 voltage register bits */
+	return v << 2;
+}
+
+
+
+static int mmci_callback(void *data)
+{
+	struct mmci_card_event *mmci_card = data;
+
+	disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD);
+	schedule_work(&mmci_card->workq);
+
+	return 0;
+}
+
+
+static ssize_t gpio_show(struct device *dev, struct device_attribute *attr,
+		  char *buf)
+{
+	struct mmci_card_event *mmci_card = container_of(
+		dev->platform_data,
+		struct mmci_card_event, mmc0_plat_data);
+
+
+	return sprintf(buf, "%d\n", !mmci_card->mmc_inserted);
+}
+
+static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL);
+
+static void _mmci_callback(struct work_struct *ws)
+{
+
+	struct mmci_card_event *mmci_card = container_of(
+		ws,
+		struct mmci_card_event, workq);
+
+	mdelay(20);
+
+	mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD);
+
+	input_report_switch(mmci_card->mmc_input, KEY_INSERT,
+			    !mmci_card->mmc_inserted);
+	input_sync(mmci_card->mmc_input);
+
+	pr_debug("MMC/SD card was %s\n",
+		 mmci_card->mmc_inserted ? "removed" : "inserted");
+
+	enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted);
+}
+
+int __devinit mmc_init(struct amba_device *adev)
+{
+	struct mmci_card_event *mmci_card;
+	struct device *mmcsd_device = &adev->dev;
+	int ret = 0;
+
+	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
+	if (!mmci_card)
+		return -ENOMEM;
+
+	/* Nominally 2.85V on our platform */
+	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
+	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
+	mmci_card->mmc0_plat_data.status = mmc_status;
+
+	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
+
+	INIT_WORK(&mmci_card->workq, _mmci_callback);
+
+	ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection");
+	if (ret) {
+		printk(KERN_CRIT "Could not allocate MMC card detection " \
+		       "GPIO pin\n");
+		goto out;
+	}
+
+	ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD);
+	if (ret) {
+		printk(KERN_CRIT "Invalid GPIO pin requested\n");
+		goto out;
+	}
+
+	ret = sysfs_create_file(&mmcsd_device->kobj,
+			       &dev_attr_mmc_inserted.attr);
+	if (ret)
+		goto out;
+
+	mmci_card->mmc_input = input_allocate_device();
+	if (!mmci_card->mmc_input) {
+		printk(KERN_CRIT "Could not allocate MMC input device\n");
+		return -ENOMEM;
+	}
+
+	mmci_card->mmc_input->name = "MMC insert notification";
+	mmci_card->mmc_input->id.bustype = BUS_HOST;
+	mmci_card->mmc_input->id.vendor = 0;
+	mmci_card->mmc_input->id.product = 0;
+	mmci_card->mmc_input->id.version = 0x0100;
+	mmci_card->mmc_input->dev.parent = mmcsd_device;
+	input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT);
+
+	/*
+	 * Since this must always be compiled into the kernel, this input
+	 * is never unregistered or free:ed.
+	 */
+	ret = input_register_device(mmci_card->mmc_input);
+	if (ret) {
+		input_free_device(mmci_card->mmc_input);
+		goto out;
+	}
+
+	input_set_drvdata(mmci_card->mmc_input, mmci_card);
+
+	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
+				     mmci_card);
+
+	schedule_work(&mmci_card->workq);
+
+	printk(KERN_INFO "Registered MMC insert/remove notification\n");
+out:
+	return ret;
+}
diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h
new file mode 100644
index 00000000000..92b85125abb
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.h
@@ -0,0 +1,18 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef MMC_H
+#define MMC_H
+
+#include <linux/amba/bus.h>
+
+int __devinit mmc_init(struct amba_device *adev);
+
+#endif
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
new file mode 100644
index 00000000000..f3664564f08
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.c
@@ -0,0 +1,58 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/u300-regs.h>
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
+void pmx_set_mission_mode_mmc(void)
+{
+	u16 val;
+
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
+
+void pmx_set_mission_mode_spi(void)
+{
+	u16 val;
+
+	/* Set up padmuxing so the SPI port and its chipselects are active */
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	/*
+	 * Activate the SPI port (disable the use of these pins for generic
+	 * GPIO, DSP, AAIF
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
+	/*
+	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
+	 * things also)
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
+	/*
+	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
+	 * things also)
+	 */
+	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
+	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
new file mode 100644
index 00000000000..8c2099ac504
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX API
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+
+#ifndef __MACH_U300_PADMUX_H
+#define __MACH_U300_PADMUX_H
+
+void pmx_set_mission_mode_mmc(void);
+void pmx_set_mission_mode_spi(void);
+
+#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
new file mode 100644
index 00000000000..cce53204880
--- /dev/null
+++ b/arch/arm/mach-u300/timer.c
@@ -0,0 +1,422 @@
+/*
+ *
+ * arch/arm/mach-u300/timer.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Timer COH 901 328, runs the OS timer interrupt.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+/* Generic stuff */
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+
+#include "clock.h"
+
+/*
+ * APP side special timer registers
+ * This timer contains four timers which can fire an interrupt each.
+ * OS (operating system) timer @ 32768 Hz
+ * DD (device driver) timer @ 1 kHz
+ * GP1 (general purpose 1) timer @ 1MHz
+ * GP2 (general purpose 2) timer @ 1MHz
+ */
+
+/* Reset OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_ROST					(0x0000)
+#define U300_TIMER_APP_ROST_TIMER_RESET				(0x00000000)
+/* Enable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_EOST					(0x0004)
+#define U300_TIMER_APP_EOST_TIMER_ENABLE			(0x00000000)
+/* Disable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_DOST					(0x0008)
+#define U300_TIMER_APP_DOST_TIMER_DISABLE			(0x00000000)
+/* OS Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SOSTM					(0x000c)
+#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT			(0x00000001)
+/* OS Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTS					(0x0010)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_OSTS_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_OSTS_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND			(0x00000080)
+/* OS Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTCC					(0x0014)
+/* OS Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_OSTTC					(0x0018)
+/* OS Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIE					(0x001c)
+#define U300_TIMER_APP_OSTIE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_OSTIE_IRQ_ENABLE				(0x00000001)
+/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIA					(0x0020)
+#define U300_TIMER_APP_OSTIA_IRQ_ACK				(0x00000080)
+
+/* Reset DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_RDDT					(0x0040)
+#define U300_TIMER_APP_RDDT_TIMER_RESET				(0x00000000)
+/* Enable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_EDDT					(0x0044)
+#define U300_TIMER_APP_EDDT_TIMER_ENABLE			(0x00000000)
+/* Disable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_DDDT					(0x0048)
+#define U300_TIMER_APP_DDDT_TIMER_DISABLE			(0x00000000)
+/* DD Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SDDTM					(0x004c)
+#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT			(0x00000001)
+/* DD Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTS					(0x0050)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_DDTS_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_DDTS_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND			(0x00000080)
+/* DD Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTCC					(0x0054)
+/* DD Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_DDTTC					(0x0058)
+/* DD Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIE					(0x005c)
+#define U300_TIMER_APP_DDTIE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_DDTIE_IRQ_ENABLE				(0x00000001)
+/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIA					(0x0060)
+#define U300_TIMER_APP_DDTIA_IRQ_ACK				(0x00000080)
+
+/* Reset GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT1					(0x0080)
+#define U300_TIMER_APP_RGPT1_TIMER_RESET			(0x00000000)
+/* Enable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT1					(0x0084)
+#define U300_TIMER_APP_EGPT1_TIMER_ENABLE			(0x00000000)
+/* Disable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT1					(0x0088)
+#define U300_TIMER_APP_DGPT1_TIMER_DISABLE			(0x00000000)
+/* GP1 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT1M					(0x008c)
+#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT			(0x00000001)
+/* GP1 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1S					(0x0090)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_GPT1S_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_GPT1S_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND			(0x00000080)
+/* GP1 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1CC					(0x0094)
+/* GP1 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT1TC					(0x0098)
+/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IE					(0x009c)
+#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE			(0x00000001)
+/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IA					(0x00a0)
+#define U300_TIMER_APP_GPT1IA_IRQ_ACK				(0x00000080)
+
+/* Reset GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT2					(0x00c0)
+#define U300_TIMER_APP_RGPT2_TIMER_RESET			(0x00000000)
+/* Enable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT2					(0x00c4)
+#define U300_TIMER_APP_EGPT2_TIMER_ENABLE			(0x00000000)
+/* Disable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT2					(0x00c8)
+#define U300_TIMER_APP_DGPT2_TIMER_DISABLE			(0x00000000)
+/* GP2 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT2M					(0x00cc)
+#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT			(0x00000001)
+/* GP2 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2S					(0x00d0)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK			(0x0000000F)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE			(0x00000001)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE			(0x00000002)
+#define U300_TIMER_APP_GPT2S_ENABLE_IND				(0x00000010)
+#define U300_TIMER_APP_GPT2S_MODE_MASK				(0x00000020)
+#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS			(0x00000000)
+#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT			(0x00000020)
+#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND			(0x00000040)
+#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND			(0x00000080)
+/* GP2 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2CC					(0x00d4)
+/* GP2 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT2TC					(0x00d8)
+/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IE					(0x00dc)
+#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE			(0x00000000)
+#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE			(0x00000001)
+/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IA					(0x00e0)
+#define U300_TIMER_APP_GPT2IA_IRQ_ACK				(0x00000080)
+
+/* Clock request control register - all four timers */
+#define U300_TIMER_APP_CRC					(0x100)
+#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
+
+#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
+
+/*
+ * The u300_set_mode() function is always called first, if we
+ * have oneshot timer active, the oneshot scheduling function
+ * u300_set_next_event() is called immediately after.
+ */
+static void u300_set_mode(enum clock_event_mode mode,
+			  struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* Disable interrupts on GPT1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 while we're reprogramming it. */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		/*
+		 * Set the periodic mode to a certain number of ticks per
+		 * jiffy.
+		 */
+		writel(TICKS_PER_JIFFY,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+		/*
+		 * Set continuous mode, so the timer keeps triggering
+		 * interrupts.
+		 */
+		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+		/* Enable timer interrupts */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Then enable the OS timer again */
+		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Just break; here? */
+		/*
+		 * The actual event will be programmed by the next event hook,
+		 * so we just set a dummy value somewhere at the end of the
+		 * universe here.
+		 */
+		/* Disable interrupts on GPT1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 while we're reprogramming it. */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		/*
+		 * Expire far in the future, u300_set_next_event() will be
+		 * called soon...
+		 */
+		writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+		/* We run one shot per tick here! */
+		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+		/* Enable interrupts for this timer */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Enable timer */
+		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/* Disable interrupts on GP1 */
+		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+		/* Disable GP1 */
+		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		/* Ignore this call */
+		break;
+	}
+}
+
+/*
+ * The app timer in one shot mode obviously has to be reprogrammed
+ * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
+ * the interrupt disable + timer disable commands with a reset command,
+ * it will fail miserably. Apparently (and I found this the hard way)
+ * the timer is very sensitive to the instruction order, though you don't
+ * get that impression from the data sheet.
+ */
+static int u300_set_next_event(unsigned long cycles,
+			       struct clock_event_device *evt)
+
+{
+	/* Disable interrupts on GPT1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 while we're reprogramming it. */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+	/* Reset the General Purpose timer 1. */
+	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+	/* IRQ in n * cycles */
+	writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+	/*
+	 * We run one shot per tick here! (This is necessary to reconfigure,
+	 * the timer will tilt if you don't!)
+	 */
+	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+	/* Enable timer interrupts */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+	/* Then enable the OS timer again */
+	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+	return 0;
+}
+
+
+/* Use general purpose timer 1 as clock event */
+static struct clock_event_device clockevent_u300_1mhz = {
+	.name           = "GPT1",
+	.rating         = 300, /* Reasonably fast and accurate clock event */
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+	.shift          = 22,
+	.set_next_event = u300_set_next_event,
+	.set_mode       = u300_set_mode,
+};
+
+/* Clock event timer interrupt handler */
+static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_u300_1mhz;
+	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
+	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction u300_timer_irq = {
+	.name           = "U300 Timer Tick",
+	.flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler        = u300_timer_interrupt,
+};
+
+/* Use general purpose timer 2 as clock source */
+static cycle_t u300_get_cycles(struct clocksource *cs)
+{
+	return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+}
+
+static struct clocksource clocksource_u300_1mhz = {
+	.name           = "GPT2",
+	.rating         = 300, /* Reasonably fast and accurate clock source */
+	.read           = u300_get_cycles,
+	.mask           = CLOCKSOURCE_MASK(32), /* 32 bits */
+	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+	.shift          = 22,
+	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+/*
+ * This sets up the system timers, clock source and clock event.
+ */
+static void __init u300_timer_init(void)
+{
+	u300_enable_timer_clock();
+	/*
+	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
+	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
+	 */
+	writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
+	writel(U300_TIMER_APP_ROST_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
+	writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
+	writel(U300_TIMER_APP_RDDT_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
+	writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
+
+	/* Reset the General Purpose timer 1. */
+	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+
+	/* Set up the IRQ handler */
+	setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
+
+	/* Reset the General Purpose timer 2 */
+	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
+	/* Set this timer to run around forever */
+	writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
+	/* Set continuous mode so it wraps around */
+	writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
+	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
+	/* Disable timer interrupts */
+	writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
+	/* Then enable the GP2 timer to use as a free running us counter */
+	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
+		U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
+
+	/* This is a pure microsecond clock source */
+	clocksource_u300_1mhz.mult =
+		clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+	if (clocksource_register(&clocksource_u300_1mhz))
+		printk(KERN_ERR "timer: failed to initialize clock "
+		       "source %s\n", clocksource_u300_1mhz.name);
+
+	clockevent_u300_1mhz.mult =
+		div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+	/* 32bit counter, so 32bits delta is max */
+	clockevent_u300_1mhz.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
+	/* This timer is slow enough to set for 1 cycle == 1 MHz */
+	clockevent_u300_1mhz.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_u300_1mhz);
+	clockevent_u300_1mhz.cpumask = cpumask_of(0);
+	clockevents_register_device(&clockevent_u300_1mhz);
+	/*
+	 * TODO: init and register the rest of the timers too, they can be
+	 * used by hrtimers!
+	 */
+}
+
+/*
+ * Very simple system timer that only register the clock event and
+ * clock source.
+ */
+struct sys_timer u300_timer = {
+	.init		= u300_timer_init,
+};
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
new file mode 100644
index 00000000000..d2a0b8847a1
--- /dev/null
+++ b/arch/arm/mach-u300/u300.c
@@ -0,0 +1,55 @@
+/*
+ *
+ * arch/arm/mach-u300/u300.c
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform machine definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init u300_init_machine(void)
+{
+	u300_init_devices();
+}
+
+#ifdef CONFIG_MACH_U300_BS2X
+#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS330
+#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
+#endif
+
+MACHINE_START(U300, MACH_U300_STRING)
+	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
+	.phys_io	= U300_AHB_PER_PHYS_BASE,
+	.io_pg_offst	= ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= BOOT_PARAMS_OFFSET,
+	.map_io		= u300_map_io,
+	.init_irq	= u300_init_irq,
+	.timer		= &u300_timer,
+	.init_machine	= u300_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index b3bebcc5623..69214fc8bd1 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -116,7 +116,7 @@ void __init versatile_init_irq(void)
 {
 	unsigned int i;
 
-	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
+	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
 
 	set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
 
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 0c0c1d63f1c..d50c94f4dbd 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o
+obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
 
 # W90X900 CPU support files
 
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
new file mode 100644
index 00000000000..f420613cd39
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.c
@@ -0,0 +1,77 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->enabled++ == 0)
+		(clk->enable)(clk, 1);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (--clk->enabled == 0)
+		(clk->enable)(clk, 0);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void w90x900_clk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
new file mode 100644
index 00000000000..4f27bda76d5
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void w90x900_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+	unsigned long		cken;
+	unsigned int		enabled;
+	void			(*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= w90x900_clk_enable,		\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+#define DEF_CLKLOOK(_clk, _devname, _conname)		\
+	{						\
+		.clk		= _clk,			\
+		.dev_id		= _devname,		\
+		.con_id		= _conname,		\
+	}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index de29ddcb945..57b5dbabeb4 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -41,7 +41,7 @@ struct sys_timer;
 extern void w90x900_init_irq(void);
 extern void w90p910_init_io(struct map_desc *mach_desc, int size);
 extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(int xtal);
+extern void w90p910_init_clocks(void);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
new file mode 100644
index 00000000000..c72e0dfa182
--- /dev/null
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -0,0 +1,154 @@
+/*
+ * linux/arch/arm/mach-w90p910/gpio.c
+ *
+ * Generic w90p910 GPIO handling
+ *
+ *  Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+
+#define GPIO_BASE 		(W90X900_VA_GPIO)
+#define GPIO_DIR		(0x04)
+#define GPIO_OUT		(0x08)
+#define GPIO_IN			(0x0C)
+#define GROUPINERV		(0x10)
+#define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
+#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+
+#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.direction_input  = w90p910_dir_input,		\
+			.direction_output = w90p910_dir_output,		\
+			.get		  = w90p910_gpio_get,		\
+			.set		  = w90p910_gpio_set,		\
+			.base		  = base_gpio,			\
+			.ngpio		  = nr_gpio,			\
+		}							\
+	}
+
+struct w90p910_gpio_chip {
+	struct gpio_chip	chip;
+	void __iomem		*regbase;	/* Base of group register*/
+	spinlock_t 		gpio_lock;
+};
+
+static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	unsigned int regval;
+
+	regval = __raw_readl(pio);
+	regval &= GPIO_GPIO(offset);
+
+	return (regval != 0);
+}
+
+static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+
+	if (val)
+		regval |= GPIO_GPIO(offset);
+	else
+		regval &= ~GPIO_GPIO(offset);
+
+	__raw_writel(regval, pio);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+}
+
+static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+	regval &= ~GPIO_GPIO(offset);
+	__raw_writel(regval, pio);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+	return 0;
+}
+
+static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	unsigned int regval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+	regval = __raw_readl(pio);
+	regval |= GPIO_GPIO(offset);
+	__raw_writel(regval, pio);
+
+	regval = __raw_readl(outreg);
+
+	if (val)
+		regval |= GPIO_GPIO(offset);
+	else
+		regval &= ~GPIO_GPIO(offset);
+
+	__raw_writel(regval, outreg);
+
+	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+	return 0;
+}
+
+static struct w90p910_gpio_chip w90p910_gpio[] = {
+	W90P910_GPIO_CHIP("GROUPC", 0, 16),
+	W90P910_GPIO_CHIP("GROUPD", 16, 10),
+	W90P910_GPIO_CHIP("GROUPE", 26, 14),
+	W90P910_GPIO_CHIP("GROUPF", 40, 10),
+	W90P910_GPIO_CHIP("GROUPG", 50, 17),
+	W90P910_GPIO_CHIP("GROUPH", 67, 8),
+	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+};
+
+void __init w90p910_init_gpio(int nr_group)
+{
+	unsigned	i;
+	struct w90p910_gpio_chip *gpio_chip;
+
+	for (i = 0; i < nr_group; i++) {
+		gpio_chip = &w90p910_gpio[i];
+		spin_lock_init(&gpio_chip->gpio_lock);
+		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
+		gpiochip_add(&gpio_chip->chip);
+	}
+}
diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
new file mode 100644
index 00000000000..034da3e390c
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-w90p910/include/mach/gpio.h
+ *
+ * Generic w90p910 GPIO handling
+ *
+ *  Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_W90P910_GPIO_H
+#define __ASM_ARCH_W90P910_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h
index 1c583f9cbcd..9d5cba3a509 100644
--- a/arch/arm/mach-w90x900/include/mach/irqs.h
+++ b/arch/arm/mach-w90x900/include/mach/irqs.h
@@ -1,8 +1,7 @@
 /*
  * arch/arm/mach-w90x900/include/mach/irqs.h
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -10,8 +9,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -31,6 +29,11 @@
 /* Main cpu interrupts */
 
 #define IRQ_WDT		W90X900_IRQ(1)
+#define IRQ_GROUP0	W90X900_IRQ(2)
+#define IRQ_GROUP1	W90X900_IRQ(3)
+#define IRQ_ACTL	W90X900_IRQ(4)
+#define IRQ_LCD		W90X900_IRQ(5)
+#define IRQ_RTC		W90X900_IRQ(6)
 #define IRQ_UART0	W90X900_IRQ(7)
 #define IRQ_UART1	W90X900_IRQ(8)
 #define IRQ_UART2	W90X900_IRQ(9)
@@ -39,7 +42,45 @@
 #define IRQ_TIMER0	W90X900_IRQ(12)
 #define IRQ_TIMER1	W90X900_IRQ(13)
 #define IRQ_T_INT_GROUP	W90X900_IRQ(14)
+#define IRQ_USBH	W90X900_IRQ(15)
+#define IRQ_EMCTX	W90X900_IRQ(16)
+#define IRQ_EMCRX	W90X900_IRQ(17)
+#define IRQ_GDMAGROUP	W90X900_IRQ(18)
+#define IRQ_DMAC	W90X900_IRQ(19)
+#define IRQ_FMI		W90X900_IRQ(20)
+#define IRQ_USBD	W90X900_IRQ(21)
+#define IRQ_ATAPI	W90X900_IRQ(22)
+#define IRQ_G2D		W90X900_IRQ(23)
+#define IRQ_PCI		W90X900_IRQ(24)
+#define IRQ_SCGROUP	W90X900_IRQ(25)
+#define IRQ_I2CGROUP	W90X900_IRQ(26)
+#define IRQ_SSP		W90X900_IRQ(27)
+#define IRQ_PWM		W90X900_IRQ(28)
+#define IRQ_KPI		W90X900_IRQ(29)
+#define IRQ_P2SGROUP	W90X900_IRQ(30)
 #define IRQ_ADC		W90X900_IRQ(31)
 #define NR_IRQS		(IRQ_ADC+1)
 
+/*for irq group*/
+
+#define	IRQ_PS2_PORT0	0x10000000
+#define	IRQ_PS2_PORT1	0x20000000
+#define	IRQ_I2C_LINE0	0x04000000
+#define	IRQ_I2C_LINE1	0x08000000
+#define	IRQ_SC_CARD0	0x01000000
+#define	IRQ_SC_CARD1	0x02000000
+#define	IRQ_GDMA_CH0	0x00100000
+#define	IRQ_GDMA_CH1	0x00200000
+#define	IRQ_TIMER2	0x00010000
+#define	IRQ_TIMER3	0x00020000
+#define	IRQ_TIMER4	0x00040000
+#define	IRQ_GROUP0_IRQ0	0x00000001
+#define	IRQ_GROUP0_IRQ1	0x00000002
+#define	IRQ_GROUP0_IRQ2	0x00000004
+#define	IRQ_GROUP0_IRQ3	0x00000008
+#define	IRQ_GROUP1_IRQ4	0x00000010
+#define	IRQ_GROUP1_IRQ5	0x00000020
+#define	IRQ_GROUP1_IRQ6	0x00000040
+#define	IRQ_GROUP1_IRQ7	0x00000080
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-w90x900/include/mach/map.h b/arch/arm/mach-w90x900/include/mach/map.h
index 79320ebe614..1a209530411 100644
--- a/arch/arm/mach-w90x900/include/mach/map.h
+++ b/arch/arm/mach-w90x900/include/mach/map.h
@@ -1,8 +1,7 @@
 /*
  * arch/arm/mach-w90x900/include/mach/map.h
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -10,8 +9,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -34,7 +32,6 @@
  * interrupt controller is the first thing we put in, to make
  * the assembly code for the irq detection easier
  */
-
 #define W90X900_VA_IRQ		W90X900_ADDR(0x00000000)
 #define W90X900_PA_IRQ		(0xB8002000)
 #define W90X900_SZ_IRQ		SZ_4K
@@ -44,33 +41,117 @@
 #define W90X900_SZ_GCR		SZ_4K
 
 /* Clock and Power management */
-
 #define W90X900_VA_CLKPWR	(W90X900_VA_GCR+0x200)
 #define W90X900_PA_CLKPWR	(0xB0000200)
 #define W90X900_SZ_CLKPWR	SZ_4K
 
 /* EBI management */
-
 #define W90X900_VA_EBI		W90X900_ADDR(0x00001000)
 #define W90X900_PA_EBI		(0xB0001000)
 #define W90X900_SZ_EBI		SZ_4K
 
 /* UARTs */
-
 #define W90X900_VA_UART		W90X900_ADDR(0x08000000)
 #define W90X900_PA_UART		(0xB8000000)
 #define W90X900_SZ_UART		SZ_4K
 
 /* Timers */
-
 #define W90X900_VA_TIMER	W90X900_ADDR(0x08001000)
 #define W90X900_PA_TIMER	(0xB8001000)
 #define W90X900_SZ_TIMER	SZ_4K
 
 /* GPIO ports */
-
 #define W90X900_VA_GPIO		W90X900_ADDR(0x08003000)
 #define W90X900_PA_GPIO		(0xB8003000)
 #define W90X900_SZ_GPIO		SZ_4K
 
+/* GDMA control */
+#define W90X900_VA_GDMA		W90X900_ADDR(0x00004000)
+#define W90X900_PA_GDMA		(0xB0004000)
+#define W90X900_SZ_GDMA		SZ_4K
+
+/* USB host controller*/
+#define W90X900_VA_USBEHCIHOST	W90X900_ADDR(0x00005000)
+#define W90X900_PA_USBEHCIHOST	(0xB0005000)
+#define W90X900_SZ_USBEHCIHOST	SZ_4K
+
+#define W90X900_VA_USBOHCIHOST	W90X900_ADDR(0x00007000)
+#define W90X900_PA_USBOHCIHOST	(0xB0007000)
+#define W90X900_SZ_USBOHCIHOST	SZ_4K
+
+/* I2C hardware controller */
+#define W90X900_VA_I2C		W90X900_ADDR(0x08006000)
+#define W90X900_PA_I2C		(0xB8006000)
+#define W90X900_SZ_I2C		SZ_4K
+
+/* Keypad Interface*/
+#define W90X900_VA_KPI		W90X900_ADDR(0x08008000)
+#define W90X900_PA_KPI		(0xB8008000)
+#define W90X900_SZ_KPI		SZ_4K
+
+/* Smart card host*/
+#define W90X900_VA_SC		W90X900_ADDR(0x08005000)
+#define W90X900_PA_SC		(0xB8005000)
+#define W90X900_SZ_SC		SZ_4K
+
+/* LCD controller*/
+#define W90X900_VA_LCD		W90X900_ADDR(0x00008000)
+#define W90X900_PA_LCD		(0xB0008000)
+#define W90X900_SZ_LCD		SZ_4K
+
+/* 2D controller*/
+#define W90X900_VA_GE		W90X900_ADDR(0x0000B000)
+#define W90X900_PA_GE		(0xB000B000)
+#define W90X900_SZ_GE		SZ_4K
+
+/* ATAPI */
+#define W90X900_VA_ATAPI	W90X900_ADDR(0x0000A000)
+#define W90X900_PA_ATAPI	(0xB000A000)
+#define W90X900_SZ_ATAPI	SZ_4K
+
+/* ADC */
+#define W90X900_VA_ADC		W90X900_ADDR(0x0800A000)
+#define W90X900_PA_ADC		(0xB800A000)
+#define W90X900_SZ_ADC		SZ_4K
+
+/* PS2 Interface*/
+#define W90X900_VA_PS2		W90X900_ADDR(0x08009000)
+#define W90X900_PA_PS2		(0xB8009000)
+#define W90X900_SZ_PS2		SZ_4K
+
+/* RTC */
+#define W90X900_VA_RTC		W90X900_ADDR(0x08004000)
+#define W90X900_PA_RTC		(0xB8004000)
+#define W90X900_SZ_RTC		SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+#define W90X900_VA_PWM		W90X900_ADDR(0x08007000)
+#define W90X900_PA_PWM		(0xB8007000)
+#define W90X900_SZ_PWM		SZ_4K
+
+/* Audio Controller controller */
+#define W90X900_VA_ACTL		W90X900_ADDR(0x00009000)
+#define W90X900_PA_ACTL		(0xB0009000)
+#define W90X900_SZ_ACTL		SZ_4K
+
+/* DMA controller */
+#define W90X900_VA_DMA		W90X900_ADDR(0x0000c000)
+#define W90X900_PA_DMA		(0xB000c000)
+#define W90X900_SZ_DMA		SZ_4K
+
+/* FMI controller */
+#define W90X900_VA_FMI		W90X900_ADDR(0x0000d000)
+#define W90X900_PA_FMI		(0xB000d000)
+#define W90X900_SZ_FMI		SZ_4K
+
+/* USB Device port */
+#define W90X900_VA_USBDEV	W90X900_ADDR(0x00006000)
+#define W90X900_PA_USBDEV	(0xB0006000)
+#define W90X900_SZ_USBDEV	SZ_4K
+
+/* External MAC control*/
+#define W90X900_VA_EMC		W90X900_ADDR(0x00003000)
+#define W90X900_PA_EMC		(0xB0003000)
+#define W90X900_SZ_EMC		SZ_4K
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
new file mode 100644
index 00000000000..f10b6a8dc06
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers  */
+#define CLK_BA		W90X900_VA_CLKPWR
+#define REG_CLKEN	(CLK_BA + 0x00)
+#define REG_CLKSEL	(CLK_BA + 0x04)
+#define REG_CLKDIV	(CLK_BA + 0x08)
+#define REG_PLLCON0	(CLK_BA + 0x0C)
+#define REG_PLLCON1	(CLK_BA + 0x10)
+#define REG_PMCON	(CLK_BA + 0x14)
+#define REG_IRQWAKECON	(CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG	(CLK_BA + 0x1C)
+#define REG_IPSRST	(CLK_BA + 0x20)
+#define REG_CLKEN1	(CLK_BA + 0x24)
+#define REG_CLKDIV1	(CLK_BA + 0x28)
+
+#endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/include/mach/regs-usb.h
new file mode 100644
index 00000000000..ab74b0c2480
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-usb.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-usb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+/* usb Control Registers  */
+#define USBH_BA		W90X900_VA_USBEHCIHOST
+#define USBD_BA		W90X900_VA_USBDEV
+#define USBO_BA		W90X900_VA_USBOHCIHOST
+
+/* USB Host Control Registers */
+#define REG_UPSCR0	(USBH_BA+0x064)
+#define REG_UPSCR1	(USBH_BA+0x068)
+#define REG_USBPCR0	(USBH_BA+0x0C4)
+#define REG_USBPCR1	(USBH_BA+0x0C8)
+
+/* USBH OHCI Control Registers */
+#define REG_OpModEn	(USBO_BA+0x204)
+/*This bit controls the polarity of over
+*current flag from external power IC.
+*/
+#define OCALow		0x08
+
+#endif /*  __ASM_ARCH_REGS_USB_H */
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 726ff6798a5..7a62bd348e8 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -3,15 +3,13 @@
  *
  * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
  *
- * Copyright (C) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (C) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * published by the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -80,6 +78,156 @@ static struct platform_device w90p910_flash_device = {
 	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
 };
 
+/* USB EHCI Host Controller */
+
+static struct resource w90x900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+struct platform_device w90x900_device_usb_ehci = {
+	.name		  = "w90x900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
+	.resource	  = w90x900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(w90x900_device_usb_ehci);
+
+/* USB OHCI Host Controller */
+
+static struct resource w90x900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
+struct platform_device w90x900_device_usb_ohci = {
+	.name		  = "w90x900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
+	.resource	  = w90x900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(w90x900_device_usb_ohci);
+
+/*TouchScreen controller*/
+
+static struct resource w90x900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device w90x900_device_ts = {
+	.name		= "w90x900-ts",
+	.id		= -1,
+	.resource	= w90x900_ts_resource,
+	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
+};
+EXPORT_SYMBOL(w90x900_device_ts);
+
+/* RTC controller*/
+
+static struct resource w90x900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device w90x900_device_rtc = {
+	.name		= "w90x900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
+	.resource	= w90x900_rtc_resource,
+};
+EXPORT_SYMBOL(w90x900_device_rtc);
+
+/* KPI controller*/
+
+static struct resource w90x900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device w90x900_device_kpi = {
+	.name		= "w90x900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
+	.resource	= w90x900_kpi_resource,
+};
+EXPORT_SYMBOL(w90x900_device_kpi);
+
+/* USB Device (Gadget)*/
+
+static struct resource w90x900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device w90x900_device_usbgadget = {
+	.name		= "w90x900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
+	.resource	= w90x900_usbgadget_resource,
+};
+EXPORT_SYMBOL(w90x900_device_usbgadget);
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -88,12 +236,18 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_serial_device,
 	&w90p910_flash_device,
+	&w90x900_device_usb_ehci,
+	&w90x900_device_usb_ohci,
+	&w90x900_device_ts,
+	&w90x900_device_rtc,
+	&w90x900_device_kpi,
+	&w90x900_device_usbgadget,
 };
 
 static void __init w90p910evb_map_io(void)
 {
 	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks(0);
+	w90p910_init_clocks();
 }
 
 static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
new file mode 100644
index 00000000000..a3520fefb5e
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -0,0 +1,116 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp-w90p910.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
+
+#define GPSELF		(0x01 << 1)
+
+#define GPSELC		(0x03 << 2)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
+
+#define GPSELEI0	(0x01 << 26)
+#define GPSELEI1	(0x01 << 27)
+
+static DECLARE_MUTEX(mfp_sem);
+
+void mfp_set_groupf(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-emc") == 0)
+		mfpen |= GPSELF;/*enable mac*/
+	else
+		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-lcd") == 0)
+		mfpen |= GPSELC;/*enable lcd*/
+	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
+			mfpen &= (~GPSELC);/*enable kpi*/
+			mfpen |= ENKPI;
+		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
+				mfpen &= (~GPSELC);/*enable nand*/
+				mfpen |= ENNAND;
+			} else
+				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev, int gpio)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-wdog") == 0)
+		mfpen |= GPSELEI1;/*enable wdog*/
+		else if (strcmp(dev_id, "w90p910-atapi") == 0)
+			mfpen |= GPSELEI0;/*enable atapi*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 2bcbaa681b9..1c97e4930b7 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -3,8 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -12,8 +11,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -36,6 +34,7 @@
 #include <mach/regs-serial.h>
 
 #include "cpu.h"
+#include "clock.h"
 
 /* Initial IO mappings */
 
@@ -45,9 +44,52 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 	IODESC_ENT(UART),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(EBI),
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(ADC),
+	IODESC_ENT(RTC),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
 	/*IODESC_ENT(LCD),*/
 };
 
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+
+static struct clk_lookup w90p910_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+};
+
 /* Initial serial platform data */
 
 struct plat_serial8250_port w90p910_uart_data[] = {
@@ -77,8 +119,9 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
 
 /*Init W90P910 clock*/
 
-void __init w90p910_init_clocks(int xtal)
+void __init w90p910_init_clocks(void)
 {
+	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
 }
 
 static int __init w90p910_init_cpu(void)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 20979564e7e..83c025e72ce 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -391,7 +391,7 @@ config CPU_FEROCEON_OLD_ID
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_NOIFAR
@@ -416,7 +416,7 @@ config CPU_32v6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
@@ -639,10 +639,23 @@ config CPU_BIG_ENDIAN
 	  port must properly enable any big-endian related features
 	  of your chipset/board/processor.
 
+config CPU_ENDIAN_BE8
+	bool
+	depends on CPU_BIG_ENDIAN
+	default CPU_V6 || CPU_V7
+	help
+	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
+
+config CPU_ENDIAN_BE32
+	bool
+	depends on CPU_BIG_ENDIAN
+	default !CPU_ENDIAN_BE8
+	help
+	  Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
+
 config CPU_HIGH_VECTOR
 	depends on !MMU && CPU_CP15 && !CPU_ARM740T
 	bool "Select the High exception vector"
-	default n
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
 	  The exception vector can be vary depending on the platform
@@ -726,7 +739,6 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 
 config OUTER_CACHE
 	bool
-	default n
 
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
@@ -739,7 +751,6 @@ config CACHE_FEROCEON_L2
 config CACHE_FEROCEON_L2_WRITETHROUGH
 	bool "Force Feroceon L2 cache write through"
 	depends on CACHE_FEROCEON_L2
-	default n
 	help
 	  Say Y here to use the Feroceon L2 cache in writethrough mode.
 	  Unless you specifically require this, say N for writeback mode.
@@ -747,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
 	default y
 	select OUTER_CACHE
 	help
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 6f7e70907e4..f332df7f0d3 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -37,6 +37,9 @@ ENTRY(v6_early_abort)
 	movne	pc, lr
 	do_thumb_abort
 	ldreq	r3, [r2]			@ read aborted ARM instruction
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	reveq	r3, r3
+#endif
 	do_ldrd_abort
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 9f88dd3be60..0ab75c60f7c 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -110,6 +110,12 @@ static int remap_area_pages(unsigned long start, unsigned long pfn,
 	return err;
 }
 
+int ioremap_page(unsigned long virt, unsigned long phys,
+		 const struct mem_type *mtype)
+{
+	return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+}
+EXPORT_SYMBOL(ioremap_page);
 
 void __check_kvm_seq(struct mm_struct *mm)
 {
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e6344ece00c..fdaa9bb87c1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -255,6 +255,7 @@ const struct mem_type *get_mem_type(unsigned int type)
 {
 	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
 }
+EXPORT_SYMBOL(get_mem_type);
 
 /*
  * Adjust the PMD section entries according to the CPU in use.
@@ -839,6 +840,20 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
 				BOOTMEM_EXCLUSIVE);
 
+	/*
+	 * U300 - This platform family can share physical memory
+	 * between two ARM cpus, one running Linux and the other
+	 * running another OS.
+	 */
+	if (machine_is_u300()) {
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) &&	\
+	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+		res_size = 0x00100000;
+#endif
+#endif
+	}
+
 #ifdef CONFIG_SA1111
 	/*
 	 * Because of the SA1111 DMA bug, we want to preserve our
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 087e239704d..524ddae9259 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -170,6 +170,9 @@ __v6_setup:
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	orr	r6, r6, #1 << 25		@ big-endian page tables
+#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index a08d9d2380d..180a08d03a0 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -19,17 +19,23 @@
 
 #include "proc-macros.S"
 
-#define TTB_C		(1 << 0)
 #define TTB_S		(1 << 1)
 #define TTB_RGN_NC	(0 << 3)
 #define TTB_RGN_OC_WBWA	(1 << 3)
 #define TTB_RGN_OC_WT	(2 << 3)
 #define TTB_RGN_OC_WB	(3 << 3)
+#define TTB_NOS		(1 << 5)
+#define TTB_IRGN_NC	((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA	((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT	((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB	((1 << 0) | (1 << 6))
 
 #ifndef CONFIG_SMP
-#define TTB_FLAGS	TTB_C|TTB_RGN_OC_WB		@ mark PTWs cacheable, outer WB
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS	TTB_IRGN_WB|TTB_RGN_OC_WB
 #else
-#define TTB_FLAGS	TTB_C|TTB_S|TTB_RGN_OC_WBWA	@ mark PTWs cacheable and shared, outer WBWA
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
 #endif
 
 ENTRY(cpu_v7_proc_init)
@@ -176,8 +182,8 @@ cpu_v7_name:
  */
 __v7_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
-	orr	r0, r0, #(0x1 << 6)
+	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode and
+	orr	r0, r0, #(1 << 6) | (1 << 0)	@ TLB ops broadcasting
 	mcr	p15, 0, r0, c1, c0, 1
 #endif
 	adr	r12, __v7_setup_stack		@ the local stack
@@ -227,12 +233,43 @@ __v7_setup:
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 #endif
-	ldr	r5, =0xff0aa1a8
-	ldr	r6, =0x40e040e0
+	/*
+	 * Memory region attributes with SCTLR.TRE=1
+	 *
+	 *   n = TEX[0],C,B
+	 *   TR = PRRR[2n+1:2n]		- memory type
+	 *   IR = NMRR[2n+1:2n]		- inner cacheable property
+	 *   OR = NMRR[2n+17:2n+16]	- outer cacheable property
+	 *
+	 *			n	TR	IR	OR
+	 *   UNCACHED		000	00
+	 *   BUFFERABLE		001	10	00	00
+	 *   WRITETHROUGH	010	10	10	10
+	 *   WRITEBACK		011	10	11	11
+	 *   reserved		110
+	 *   WRITEALLOC		111	10	01	01
+	 *   DEV_SHARED		100	01
+	 *   DEV_NONSHARED	100	01
+	 *   DEV_WC		001	10
+	 *   DEV_CACHED		011	10
+	 *
+	 * Other attributes:
+	 *
+	 *   DS0 = PRRR[16] = 0		- device shareable property
+	 *   DS1 = PRRR[17] = 1		- device shareable property
+	 *   NS0 = PRRR[18] = 0		- normal shareable property
+	 *   NS1 = PRRR[19] = 1		- normal shareable property
+	 *   NOS = PRRR[24+n] = 1	- not outer shareable
+	 */
+	ldr	r5, =0xff0a81a8			@ PRRR
+	ldr	r6, =0x40e040e0			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	orr	r6, r6, #1 << 25		@ big-endian page tables
+#endif
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
@@ -240,14 +277,14 @@ __v7_setup:
 ENDPROC(__v7_setup)
 
 	/*   AT
-	 *  TFR   EV X F   I D LR
-	 * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
+	 *  TFR   EV X F   I D LR    S
+	 * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
 	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *    1    0 110       0011 1.00 .111 1101 < we want
+	 *    1    0 110       0011 1100 .111 1101 < we want
 	 */
 	.type	v7_crval, #object
 v7_crval:
-	crval	clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
+	crval	clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
 
 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index b637e7380ab..a26a605b73b 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -42,9 +42,11 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	mov	r1, r1, lsl #PAGE_SHIFT
 	vma_vm_flags r2, r2			@ get vma->vm_flags
 1:
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA (was 1)
-	tst	r2, #VM_EXEC			@ Executable area ?
-	mcrne	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA (was 1)
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 
+#else
+	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
+#endif
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
@@ -69,8 +71,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	r0, r0, lsl #PAGE_SHIFT
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA
-	mcr	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable)
+#else
+	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
+#endif
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
@@ -87,5 +92,5 @@ ENDPROC(v7wbi_flush_kern_tlb_range)
 ENTRY(v7wbi_tlb_fns)
 	.long	v7wbi_flush_user_tlb_range
 	.long	v7wbi_flush_kern_tlb_range
-	.long	v6wbi_tlb_flags
+	.long	v7wbi_tlb_flags
 	.size	v7wbi_tlb_fns, . - v7wbi_tlb_fns
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 853d42bb868..4ce0f9801e2 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -41,6 +41,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
+#include <mach/board-eb.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 17d0e9906d5..8986b741223 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR
 config MXC_PWM
 	tristate "Enable PWM driver"
 	depends on ARCH_MXC
+	select HAVE_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config ARCH_HAS_RNGA
+	bool
+	depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+	bool
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 055406312b6..e3212c8ff42 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 89e95798cc3..7506d963be4 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq)
 	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
 }
 
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
 static int gpio_set_irq_type(u32 irq, u32 type)
 {
 	u32 gpio = irq_to_gpio(irq);
@@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	int edge;
 	void __iomem *reg = port->base;
 
+	port->both_edges &= ~(1 << (gpio & 31));
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
@@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val = mxc_gpio_get(&port->chip, gpio & 31);
+		if (val) {
+			edge = GPIO_INT_LOW_LEV;
+			pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+		} else {
+			edge = GPIO_INT_HIGH_LEV;
+			pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+		}
+		port->both_edges |= 1 << (gpio & 31);
+		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
+	default:
 		return -EINVAL;
 	}
 
@@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	return 0;
 }
 
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+	void __iomem *reg = port->base;
+	u32 bit, val;
+	int edge;
+
+	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+	bit = gpio & 0xf;
+	val = __raw_readl(reg);
+	edge = (val >> (bit << 1)) & 3;
+	val &= ~(0x3 << (bit << 1));
+	switch (edge) {
+	case GPIO_INT_HIGH_LEV:
+		edge = GPIO_INT_LOW_LEV;
+		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+		break;
+	case GPIO_INT_LOW_LEV:
+		edge = GPIO_INT_HIGH_LEV;
+		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+		break;
+	default:
+		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+		       gpio, edge);
+		return;
+	}
+	__raw_writel(val | (edge << (bit << 1)), reg);
+}
+
 /* handle n interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
@@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 
 	gpio_irq_no = port->virtual_irq_start;
 	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+		u32 gpio = irq_to_gpio(gpio_irq_no);
 
 		if ((irq_stat & 1) == 0)
 			continue;
 
 		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+		if (port->both_edges & (1 << (gpio & 31)))
+			mxc_flip_edge(port, gpio);
+
 		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
 				&irq_desc[gpio_irq_no]);
 	}
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
new file mode 100644
index 00000000000..8769e910e55
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
+ * All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+
+#include <mach/hardware.h>
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
new file mode 100644
index 00000000000..06701df74c4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
+#endif				/* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
new file mode 100644
index 00000000000..a870f8ea244
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
new file mode 100644
index 00000000000..552b55d714d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 318c72ada13..06e6895f7f6 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,7 +114,7 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
new file mode 100644
index 00000000000..78cf31e22e4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+	MX31LILLY_NOBOARD	= 0,
+	MX31LILLY_DB		= 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lilly_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5ad7d..52fbdf2d6f2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,28 +11,8 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_MAX_EXP_IO_LINES	16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE		SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE	SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE		(SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index f8aef1babb7..303fd2434a2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 2b6b316d0f5..519bab3eb28 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,9 +11,54 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
 #endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
new file mode 100644
index 00000000000..1111037d6d9
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba3c8f..f0a1fa1938a 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62afd90..4fcd7499e09 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,7 +19,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
new file mode 100644
index 00000000000..15fbdf16abc
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 4ff762dd45c..04033ec637d 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index b2f9b72644d..02c3cd004db 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -14,7 +14,11 @@
 struct platform_device;
 struct clk;
 
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk);
 extern int mx1_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f773148bc2..bbc5f6753cf 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -25,6 +25,9 @@
 #ifdef CONFIG_MACH_MX27ADS
 #include <mach/board-mx27ads.h>
 #endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
 #ifdef CONFIG_MACH_PCM038
 #include <mach/board-pcm038.h>
 #endif
@@ -34,6 +37,21 @@
 #ifdef CONFIG_MACH_QONG
 #include <mach/board-qong.h>
 #endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
+#endif
+#ifdef CONFIG_MACH_ARMADILLO5X0
+#include <mach/board-armadillo5x0.h>
+#endif
+#ifdef CONFIG_MACH_MX35_3DS
+#include <mach/board-mx35pdk.h>
+#endif
+#ifdef CONFIG_MACH_MX27LITE
+#include <mach/board-mx27lite.h>
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index ea509f1090f..894d2f87c85 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -35,6 +35,7 @@ struct mxc_gpio_port {
 	int irq;
 	int virtual_irq_start;
 	struct gpio_chip chip;
+	u32 both_edges;
 };
 
 int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index f9bd17dd8dd..4adec9b154d 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -24,7 +24,7 @@
 
 struct imxuart_platform_data {
 	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
 	unsigned int flags;
 	void (*irda_enable)(int enable);
 	unsigned int irda_inv_rx:1;
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 762a7b0430e..9f0101157ec 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,8 +76,8 @@ struct imx_fb_platform_data {
 	u_char * fixed_screen_cpu;
 	dma_addr_t fixed_screen_dma;
 
-	int (*init)(struct platform_device*);
-	int (*exit)(struct platform_device*);
+	int (*init)(struct platform_device *);
+	void (*exit)(struct platform_device *);
 
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 57e927a1fd3..27f8d1b2bc6 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -114,7 +114,7 @@ enum iomux_gp_func {
  * 	- setups the iomux according to the configuration
  * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
  */
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
  * setups mutliple pins
  * convenient way to call the above function with tables
@@ -633,6 +633,40 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
new file mode 100644
index 00000000000..00b0ac1db22
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -0,0 +1,1267 @@
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*									  PAD    MUX   ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1				IOMUX_PAD(0x328, 0x004, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2				IOMUX_PAD(0x328, 0x004, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1				IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO				IOMUX_PAD(0x328, 0x004, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K				IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4				IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1				IOMUX_PAD(0x32c, 0x008, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2				IOMUX_PAD(0x32c, 0x008, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3				IOMUX_PAD(0x32c, 0x008, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO				IOMUX_PAD(0x32c, 0x008, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5				IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				IOMUX_PAD(0x32c, 0x008, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				IOMUX_PAD(0x330, 0x00c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			IOMUX_PAD(0x330, 0x00c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6				IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0				IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE				IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				IOMUX_PAD(0x334, 0x010, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1				IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO				IOMUX_PAD(0x338, 0x014, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2				IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			IOMUX_PAD(0x338, 0x014, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				IOMUX_PAD(0x338, 0x014, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0				IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			IOMUX_PAD(0x33c, 0x018, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0				IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			IOMUX_PAD(0x340, 0x01c, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			IOMUX_PAD(0x344, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B				IOMUX_PAD(0x348, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO					IOMUX_PAD(0x34c, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8					IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			IOMUX_PAD(0x350, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			IOMUX_PAD(0x354, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			IOMUX_PAD(0x358, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			IOMUX_PAD(0x35c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		IOMUX_PAD(0x360, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY				IOMUX_PAD(0x364, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7					IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0				IOMUX_PAD(0x368, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1				IOMUX_PAD(0x36c, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2				IOMUX_PAD(0x370, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3				IOMUX_PAD(0x374, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4				IOMUX_PAD(0x378, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5				IOMUX_PAD(0x37c, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6				IOMUX_PAD(0x380, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7				IOMUX_PAD(0x384, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8				IOMUX_PAD(0x388, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9				IOMUX_PAD(0x38c, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10				IOMUX_PAD(0x390, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10					IOMUX_PAD(0x394, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11				IOMUX_PAD(0x398, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12				IOMUX_PAD(0x39c, 0x05c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13				IOMUX_PAD(0x3a0, 0x060, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14				IOMUX_PAD(0x3a4, 0x064, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15				IOMUX_PAD(0x3a8, 0x068, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16				IOMUX_PAD(0x3ac, 0x06c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17				IOMUX_PAD(0x3b0, 0x070, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18				IOMUX_PAD(0x3b4, 0x074, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19				IOMUX_PAD(0x3b8, 0x078, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20				IOMUX_PAD(0x3bc, 0x07c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21				IOMUX_PAD(0x3c0, 0x080, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22				IOMUX_PAD(0x3c4, 0x084, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23				IOMUX_PAD(0x3c8, 0x088, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24				IOMUX_PAD(0x3cc, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25				IOMUX_PAD(0x3d0, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				IOMUX_PAD(0x3d4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				IOMUX_PAD(0x3d8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0				IOMUX_PAD(0x3dc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1				IOMUX_PAD(0x3e0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2				IOMUX_PAD(0x3e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3				IOMUX_PAD(0x3e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4				IOMUX_PAD(0x3ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5				IOMUX_PAD(0x3f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6				IOMUX_PAD(0x3f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7				IOMUX_PAD(0x3f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8				IOMUX_PAD(0x3fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9				IOMUX_PAD(0x400, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10				IOMUX_PAD(0x404, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11				IOMUX_PAD(0x408, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12				IOMUX_PAD(0x40c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13				IOMUX_PAD(0x410, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14				IOMUX_PAD(0x414, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15				IOMUX_PAD(0x418, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16				IOMUX_PAD(0x41c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17				IOMUX_PAD(0x420, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18				IOMUX_PAD(0x424, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19				IOMUX_PAD(0x428, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20				IOMUX_PAD(0x42c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21				IOMUX_PAD(0x430, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22				IOMUX_PAD(0x434, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23				IOMUX_PAD(0x438, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24				IOMUX_PAD(0x43c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25				IOMUX_PAD(0x440, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26				IOMUX_PAD(0x444, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27				IOMUX_PAD(0x448, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28				IOMUX_PAD(0x44c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29				IOMUX_PAD(0x450, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30				IOMUX_PAD(0x454, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31				IOMUX_PAD(0x458, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				IOMUX_PAD(0x45c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				IOMUX_PAD(0x460, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				IOMUX_PAD(0x464, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				IOMUX_PAD(0x468, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B				IOMUX_PAD(0x46c, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B				IOMUX_PAD(0x470, 0x098, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE					IOMUX_PAD(0x474, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0				IOMUX_PAD(0x478, 0x0a0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1				IOMUX_PAD(0x47c, 0x0a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3				IOMUX_PAD(0x47c, 0x0a4, 3, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2				IOMUX_PAD(0x480, 0x0a8, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3				IOMUX_PAD(0x484, 0x0ac, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4				IOMUX_PAD(0x488, 0x0b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B				IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1				IOMUX_PAD(0x488, 0x0b0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20					IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5				IOMUX_PAD(0x48c, 0x0b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2					IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2					IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2				IOMUX_PAD(0x48c, 0x0b4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21					IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				IOMUX_PAD(0x490, 0x0b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22				IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB				IOMUX_PAD(0x494, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA				IOMUX_PAD(0x498, 0x0bc, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK				IOMUX_PAD(0x49c, 0x0c0, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW					IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS				IOMUX_PAD(0x4a4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS				IOMUX_PAD(0x4a8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE				IOMUX_PAD(0x4ac, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			IOMUX_PAD(0x4b0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			IOMUX_PAD(0x4b4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				IOMUX_PAD(0x4b8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				IOMUX_PAD(0x4bc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				IOMUX_PAD(0x4c0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				IOMUX_PAD(0x4c4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				IOMUX_PAD(0x4c8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18				IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19				IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE				IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0				IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20				IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE				IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21				IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR				IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22				IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB				IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD				IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23					IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15				IOMUX_PAD(0x4e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14				IOMUX_PAD(0x4e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13				IOMUX_PAD(0x4ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12				IOMUX_PAD(0x4f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11				IOMUX_PAD(0x4f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10				IOMUX_PAD(0x4f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9				IOMUX_PAD(0x4fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8				IOMUX_PAD(0x500, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7				IOMUX_PAD(0x504, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6				IOMUX_PAD(0x508, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5				IOMUX_PAD(0x50c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4				IOMUX_PAD(0x510, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3				IOMUX_PAD(0x514, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2				IOMUX_PAD(0x518, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1				IOMUX_PAD(0x51c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0				IOMUX_PAD(0x520, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8				IOMUX_PAD(0x524, 0x0e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0				IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20				IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			IOMUX_PAD(0x524, 0x0e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9				IOMUX_PAD(0x528, 0x0e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1				IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21				IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			IOMUX_PAD(0x528, 0x0e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10				IOMUX_PAD(0x52c, 0x0e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2				IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22				IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			IOMUX_PAD(0x52c, 0x0e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11				IOMUX_PAD(0x530, 0x0ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3				IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23				IOMUX_PAD(0x530, 0x0ec, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12				IOMUX_PAD(0x534, 0x0f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0				IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24				IOMUX_PAD(0x534, 0x0f0, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13				IOMUX_PAD(0x538, 0x0f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1				IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25				IOMUX_PAD(0x538, 0x0f4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14				IOMUX_PAD(0x53c, 0x0f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2				IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26				IOMUX_PAD(0x53c, 0x0f8, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15				IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3				IOMUX_PAD(0x540, 0x0fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27				IOMUX_PAD(0x540, 0x0fc, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				IOMUX_PAD(0x544, 0x100, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28				IOMUX_PAD(0x544, 0x100, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			IOMUX_PAD(0x548, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29				IOMUX_PAD(0x548, 0x104, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			IOMUX_PAD(0x54c, 0x108, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30				IOMUX_PAD(0x54c, 0x108, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			IOMUX_PAD(0x550, 0x10c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31				IOMUX_PAD(0x550, 0x10c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL				IOMUX_PAD(0x554, 0x110, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24				IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			IOMUX_PAD(0x554, 0x110, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA				IOMUX_PAD(0x558, 0x114, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25				IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL				IOMUX_PAD(0x55c, 0x118, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				IOMUX_PAD(0x55c, 0x118, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			IOMUX_PAD(0x55c, 0x118, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26				IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		IOMUX_PAD(0x55c, 0x118, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA				IOMUX_PAD(0x560, 0x11c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27				IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		IOMUX_PAD(0x560, 0x11c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				IOMUX_PAD(0x564, 0x120, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28				IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		IOMUX_PAD(0x564, 0x120, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				IOMUX_PAD(0x568, 0x124, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29				IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		IOMUX_PAD(0x568, 0x124, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				IOMUX_PAD(0x56c, 0x128, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30					IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			IOMUX_PAD(0x56c, 0x128, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			IOMUX_PAD(0x570, 0x12c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31				IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		IOMUX_PAD(0x570, 0x12c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				IOMUX_PAD(0x574, 0x130, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x574, 0x130, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI				IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0					IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		IOMUX_PAD(0x574, 0x130, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				IOMUX_PAD(0x578, 0x134, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO				IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1					IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		IOMUX_PAD(0x578, 0x134, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				IOMUX_PAD(0x57c, 0x138, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK				IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2					IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			IOMUX_PAD(0x57c, 0x138, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			IOMUX_PAD(0x580, 0x13c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY				IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3				IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		IOMUX_PAD(0x580, 0x13c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR				IOMUX_PAD(0x584, 0x140, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4					IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			IOMUX_PAD(0x584, 0x140, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR					IOMUX_PAD(0x588, 0x144, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5					IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			IOMUX_PAD(0x588, 0x144, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR				IOMUX_PAD(0x58c, 0x148, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x58c, 0x148, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0				IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE				IOMUX_PAD(0x58c, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6					IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			IOMUX_PAD(0x58c, 0x148, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT				IOMUX_PAD(0x590, 0x14c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7					IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0				IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2				IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST					IOMUX_PAD(0x594, 0x150, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8					IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1				IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3					IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT				IOMUX_PAD(0x598, 0x154, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9					IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2				IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3				IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				IOMUX_PAD(0x59c, 0x158, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			IOMUX_PAD(0x59c, 0x158, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2				IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN				IOMUX_PAD(0x59c, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR				IOMUX_PAD(0x59c, 0x158, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10				IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		IOMUX_PAD(0x59c, 0x158, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				IOMUX_PAD(0x5a0, 0x15c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			IOMUX_PAD(0x5a0, 0x15c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3				IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN				IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR				IOMUX_PAD(0x5a0, 0x15c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11				IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0				IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				IOMUX_PAD(0x5a4, 0x160, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL				IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				IOMUX_PAD(0x5a4, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12				IOMUX_PAD(0x5a4, 0x160, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1				IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				IOMUX_PAD(0x5a8, 0x164, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA				IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				IOMUX_PAD(0x5a8, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13				IOMUX_PAD(0x5a8, 0x164, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0				IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1					IOMUX_PAD(0x5ac, 0x168, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY				IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2					IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3				IOMUX_PAD(0x5ac, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI					IOMUX_PAD(0x5ac, 0x168, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14					IOMUX_PAD(0x5ac, 0x168, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6				IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1					IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0					IOMUX_PAD(0x5b0, 0x16c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3					IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B				IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD					IOMUX_PAD(0x5b0, 0x16c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15					IOMUX_PAD(0x5b0, 0x16c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7				IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2					IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				IOMUX_PAD(0x5b4, 0x170, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16				IOMUX_PAD(0x5b4, 0x170, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		IOMUX_PAD(0x5b4, 0x170, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				IOMUX_PAD(0x5b8, 0x174, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17				IOMUX_PAD(0x5b8, 0x174, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		IOMUX_PAD(0x5b8, 0x174, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				IOMUX_PAD(0x5bc, 0x178, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18				IOMUX_PAD(0x5bc, 0x178, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			IOMUX_PAD(0x5bc, 0x178, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				IOMUX_PAD(0x5c0, 0x17c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO				IOMUX_PAD(0x5c0, 0x17c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19				IOMUX_PAD(0x5c0, 0x17c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			IOMUX_PAD(0x5c0, 0x17c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			IOMUX_PAD(0x5c0, 0x17c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				IOMUX_PAD(0x5c4, 0x180, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4				IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			IOMUX_PAD(0x5c4, 0x180, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		IOMUX_PAD(0x5c4, 0x180, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			IOMUX_PAD(0x5c8, 0x184, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			IOMUX_PAD(0x5c8, 0x184, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	IOMUX_PAD(0x5c8, 0x184, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX				IOMUX_PAD(0x5cc, 0x188, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI				IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4				IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6					IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			IOMUX_PAD(0x5cc, 0x188, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX				IOMUX_PAD(0x5d0, 0x18c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO				IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5				IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7					IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			IOMUX_PAD(0x5d0, 0x18c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS				IOMUX_PAD(0x5d4, 0x190, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK				IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL					IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0				IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6				IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8					IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1				IOMUX_PAD(0x5d4, 0x190, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			IOMUX_PAD(0x5d4, 0x190, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS				IOMUX_PAD(0x5d8, 0x194, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY				IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA					IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1				IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7				IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9					IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2				IOMUX_PAD(0x5d8, 0x194, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			IOMUX_PAD(0x5d8, 0x194, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX				IOMUX_PAD(0x5dc, 0x198, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4				IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10					IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX				IOMUX_PAD(0x5e0, 0x19c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5				IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11					IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS				IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN				IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2				IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6				IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12					IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX				IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS				IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN				IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3				IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7				IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13					IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX				IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				IOMUX_PAD(0x5ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK					IOMUX_PAD(0x5f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS					IOMUX_PAD(0x5f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI					IOMUX_PAD(0x5f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO					IOMUX_PAD(0x5fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB				IOMUX_PAD(0x600, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B					IOMUX_PAD(0x604, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD				IOMUX_PAD(0x608, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			IOMUX_PAD(0x60c, 0x1a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			IOMUX_PAD(0x60c, 0x1a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14				IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			IOMUX_PAD(0x610, 0x1ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15				IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0				IOMUX_PAD(0x614, 0x1b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0					IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			IOMUX_PAD(0x614, 0x1b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1				IOMUX_PAD(0x618, 0x1b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1					IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			IOMUX_PAD(0x618, 0x1b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2				IOMUX_PAD(0x61c, 0x1b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2					IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			IOMUX_PAD(0x61c, 0x1b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3				IOMUX_PAD(0x620, 0x1bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3					IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			IOMUX_PAD(0x620, 0x1bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4				IOMUX_PAD(0x624, 0x1c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4					IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			IOMUX_PAD(0x624, 0x1c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5				IOMUX_PAD(0x628, 0x1c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5					IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			IOMUX_PAD(0x628, 0x1c4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6				IOMUX_PAD(0x62c, 0x1c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6					IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			IOMUX_PAD(0x62c, 0x1c8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7				IOMUX_PAD(0x630, 0x1cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7					IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			IOMUX_PAD(0x630, 0x1cc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8				IOMUX_PAD(0x634, 0x1d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8					IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10					IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			IOMUX_PAD(0x63c, 0x1d8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11				IOMUX_PAD(0x640, 0x1dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11					IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			IOMUX_PAD(0x640, 0x1dc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			IOMUX_PAD(0x640, 0x1dc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12				IOMUX_PAD(0x644, 0x1e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12					IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			IOMUX_PAD(0x644, 0x1e0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			IOMUX_PAD(0x644, 0x1e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13				IOMUX_PAD(0x648, 0x1e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13					IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			IOMUX_PAD(0x648, 0x1e4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			IOMUX_PAD(0x648, 0x1e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14				IOMUX_PAD(0x64c, 0x1e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14					IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		IOMUX_PAD(0x64c, 0x1e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			IOMUX_PAD(0x64c, 0x1e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15				IOMUX_PAD(0x650, 0x1ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15					IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		IOMUX_PAD(0x650, 0x1ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			IOMUX_PAD(0x650, 0x1ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16				IOMUX_PAD(0x654, 0x1f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16					IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		IOMUX_PAD(0x654, 0x1f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			IOMUX_PAD(0x654, 0x1f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17				IOMUX_PAD(0x658, 0x1f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2				IOMUX_PAD(0x658, 0x1f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17					IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		IOMUX_PAD(0x658, 0x1f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			IOMUX_PAD(0x658, 0x1f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18				IOMUX_PAD(0x65c, 0x1f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD				IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24					IOMUX_PAD(0x65c, 0x1f8, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		IOMUX_PAD(0x65c, 0x1f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			IOMUX_PAD(0x65c, 0x1f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19				IOMUX_PAD(0x660, 0x1fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK				IOMUX_PAD(0x660, 0x1fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1				IOMUX_PAD(0x660, 0x1fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK				IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25					IOMUX_PAD(0x660, 0x1fc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		IOMUX_PAD(0x660, 0x1fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			IOMUX_PAD(0x660, 0x1fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20				IOMUX_PAD(0x664, 0x200, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0				IOMUX_PAD(0x664, 0x200, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				IOMUX_PAD(0x664, 0x200, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0				IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26					IOMUX_PAD(0x664, 0x200, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		IOMUX_PAD(0x664, 0x200, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			IOMUX_PAD(0x664, 0x200, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21				IOMUX_PAD(0x668, 0x204, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				IOMUX_PAD(0x668, 0x204, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS				IOMUX_PAD(0x668, 0x204, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1				IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			IOMUX_PAD(0x668, 0x204, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27					IOMUX_PAD(0x668, 0x204, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		IOMUX_PAD(0x668, 0x204, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			IOMUX_PAD(0x668, 0x204, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22				IOMUX_PAD(0x66c, 0x208, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR				IOMUX_PAD(0x66c, 0x208, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2				IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28					IOMUX_PAD(0x66c, 0x208, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			IOMUX_PAD(0x66c, 0x208, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				IOMUX_PAD(0x66c, 0x208, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23				IOMUX_PAD(0x670, 0x20c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD				IOMUX_PAD(0x670, 0x20c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3				IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29					IOMUX_PAD(0x670, 0x20c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			IOMUX_PAD(0x670, 0x20c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				IOMUX_PAD(0x670, 0x20c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			IOMUX_PAD(0x674, 0x210, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30				IOMUX_PAD(0x674, 0x210, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		IOMUX_PAD(0x674, 0x210, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			IOMUX_PAD(0x674, 0x210, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			IOMUX_PAD(0x678, 0x214, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			IOMUX_PAD(0x678, 0x214, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31				IOMUX_PAD(0x678, 0x214, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	IOMUX_PAD(0x678, 0x214, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		IOMUX_PAD(0x678, 0x214, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			IOMUX_PAD(0x67c, 0x218, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			IOMUX_PAD(0x67c, 0x218, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0				IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		IOMUX_PAD(0x67c, 0x218, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			IOMUX_PAD(0x67c, 0x218, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			IOMUX_PAD(0x680, 0x21c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1				IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	IOMUX_PAD(0x680, 0x21c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			IOMUX_PAD(0x680, 0x21c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			IOMUX_PAD(0x684, 0x220, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			IOMUX_PAD(0x684, 0x220, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2				IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			IOMUX_PAD(0x684, 0x220, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			IOMUX_PAD(0x684, 0x220, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			IOMUX_PAD(0x688, 0x224, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			IOMUX_PAD(0x688, 0x224, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3				IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			IOMUX_PAD(0x688, 0x224, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			IOMUX_PAD(0x688, 0x224, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			IOMUX_PAD(0x68c, 0x228, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				IOMUX_PAD(0x68c, 0x228, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4				IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		IOMUX_PAD(0x68c, 0x228, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			IOMUX_PAD(0x68c, 0x228, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			IOMUX_PAD(0x690, 0x22c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5				IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		IOMUX_PAD(0x690, 0x22c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			IOMUX_PAD(0x690, 0x22c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD				IOMUX_PAD(0x694, 0x230, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK				IOMUX_PAD(0x694, 0x230, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6				IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			IOMUX_PAD(0x694, 0x230, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK				IOMUX_PAD(0x698, 0x234, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS				IOMUX_PAD(0x698, 0x234, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			IOMUX_PAD(0x698, 0x234, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7				IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			IOMUX_PAD(0x698, 0x234, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				IOMUX_PAD(0x69c, 0x238, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				IOMUX_PAD(0x69c, 0x238, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			IOMUX_PAD(0x69c, 0x238, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8				IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			IOMUX_PAD(0x69c, 0x238, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				IOMUX_PAD(0x6a0, 0x23c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				IOMUX_PAD(0x6a0, 0x23c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			IOMUX_PAD(0x6a0, 0x23c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9				IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			IOMUX_PAD(0x6a0, 0x23c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				IOMUX_PAD(0x6a4, 0x240, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				IOMUX_PAD(0x6a4, 0x240, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			IOMUX_PAD(0x6a4, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10				IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			IOMUX_PAD(0x6a4, 0x240, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				IOMUX_PAD(0x6a8, 0x244, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				IOMUX_PAD(0x6a8, 0x244, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			IOMUX_PAD(0x6a8, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11				IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			IOMUX_PAD(0x6a8, 0x244, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD				IOMUX_PAD(0x6ac, 0x248, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL				IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0				IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x6ac, 0x248, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK				IOMUX_PAD(0x6b0, 0x24c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA				IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1				IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				IOMUX_PAD(0x6b0, 0x24c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				IOMUX_PAD(0x6b4, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2				IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				IOMUX_PAD(0x6b8, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			IOMUX_PAD(0x6b8, 0x254, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3				IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				IOMUX_PAD(0x6bc, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS				IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4				IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				IOMUX_PAD(0x6c0, 0x25c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS				IOMUX_PAD(0x6c0, 0x25c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				IOMUX_PAD(0x6c0, 0x25c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5				IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0				IOMUX_PAD(0x6c4, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3				IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				IOMUX_PAD(0x6c4, 0x260, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6				IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				IOMUX_PAD(0x6c4, 0x260, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		IOMUX_PAD(0x6c4, 0x260, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1				IOMUX_PAD(0x6c8, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				IOMUX_PAD(0x6c8, 0x264, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0				IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7				IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				IOMUX_PAD(0x6c8, 0x264, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		IOMUX_PAD(0x6c8, 0x264, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR				IOMUX_PAD(0x6cc, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			IOMUX_PAD(0x6cc, 0x268, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1				IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8				IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				IOMUX_PAD(0x6cc, 0x268, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		IOMUX_PAD(0x6cc, 0x268, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW				IOMUX_PAD(0x6d0, 0x26c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			IOMUX_PAD(0x6d0, 0x26c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			IOMUX_PAD(0x6d0, 0x26c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9				IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				IOMUX_PAD(0x6d0, 0x26c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		IOMUX_PAD(0x6d0, 0x26c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK				IOMUX_PAD(0x6d4, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO				IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10				IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				IOMUX_PAD(0x6d4, 0x270, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		IOMUX_PAD(0x6d4, 0x270, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			IOMUX_PAD(0x6d8, 0x274, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			IOMUX_PAD(0x6d8, 0x274, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11				IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			IOMUX_PAD(0x6d8, 0x274, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		IOMUX_PAD(0x6d8, 0x274, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY				IOMUX_PAD(0x6dc, 0x278, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				IOMUX_PAD(0x6dc, 0x278, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				IOMUX_PAD(0x6dc, 0x278, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12				IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				IOMUX_PAD(0x6dc, 0x278, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		IOMUX_PAD(0x6dc, 0x278, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0				IOMUX_PAD(0x6e0, 0x27c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				IOMUX_PAD(0x6e0, 0x27c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				IOMUX_PAD(0x6e0, 0x27c, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13				IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				IOMUX_PAD(0x6e0, 0x27c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		IOMUX_PAD(0x6e0, 0x27c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1				IOMUX_PAD(0x6e4, 0x280, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				IOMUX_PAD(0x6e4, 0x280, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			IOMUX_PAD(0x6e4, 0x280, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				IOMUX_PAD(0x6e4, 0x280, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14				IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				IOMUX_PAD(0x6e4, 0x280, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			IOMUX_PAD(0x6e4, 0x280, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2				IOMUX_PAD(0x6e8, 0x284, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				IOMUX_PAD(0x6e8, 0x284, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			IOMUX_PAD(0x6e8, 0x284, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				IOMUX_PAD(0x6e8, 0x284, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15				IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				IOMUX_PAD(0x6e8, 0x284, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			IOMUX_PAD(0x6e8, 0x284, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3				IOMUX_PAD(0x6e8, 0x288, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16				IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			IOMUX_PAD(0x6e8, 0x288, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			IOMUX_PAD(0x6e8, 0x288, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4				IOMUX_PAD(0x6f0, 0x28c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17				IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			IOMUX_PAD(0x6f0, 0x28c, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			IOMUX_PAD(0x6f0, 0x28c, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5				IOMUX_PAD(0x6f4, 0x290, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18				IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			IOMUX_PAD(0x6f4, 0x290, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			IOMUX_PAD(0x6f4, 0x290, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6				IOMUX_PAD(0x6f8, 0x294, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				IOMUX_PAD(0x6f8, 0x294, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR				IOMUX_PAD(0x6f8, 0x294, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19				IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			IOMUX_PAD(0x6f8, 0x294, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7				IOMUX_PAD(0x6fc, 0x298, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR				IOMUX_PAD(0x6fc, 0x298, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20				IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			IOMUX_PAD(0x6fc, 0x298, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8				IOMUX_PAD(0x700, 0x29c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS				IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI				IOMUX_PAD(0x700, 0x29c, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21				IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			IOMUX_PAD(0x700, 0x29c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9				IOMUX_PAD(0x704, 0x2a0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS				IOMUX_PAD(0x704, 0x2a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD				IOMUX_PAD(0x704, 0x2a0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22				IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			IOMUX_PAD(0x704, 0x2a0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10			IOMUX_PAD(0x708, 0x2a4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23				IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			IOMUX_PAD(0x708, 0x2a4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11			IOMUX_PAD(0x70c, 0x2a8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			IOMUX_PAD(0x70c, 0x2a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24				IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			IOMUX_PAD(0x70c, 0x2a8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12			IOMUX_PAD(0x710, 0x2ac, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL				IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25				IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			IOMUX_PAD(0x710, 0x2ac, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13			IOMUX_PAD(0x714, 0x2b0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA				IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26				IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			IOMUX_PAD(0x714, 0x2b0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14			IOMUX_PAD(0x718, 0x2b4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0				IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27				IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			IOMUX_PAD(0x718, 0x2b4, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15			IOMUX_PAD(0x71c, 0x2b8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1				IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28				IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			IOMUX_PAD(0x71c, 0x2b8, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				IOMUX_PAD(0x720, 0x2bc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29				IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			IOMUX_PAD(0x720, 0x2bc, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			IOMUX_PAD(0x724, 0x2c0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			IOMUX_PAD(0x724, 0x2c0, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				IOMUX_PAD(0x728, 0x2c4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0				IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31				IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			IOMUX_PAD(0x728, 0x2c4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			IOMUX_PAD(0x728, 0x2c4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0				IOMUX_PAD(0x72c, 0x2c8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1				IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0				IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				IOMUX_PAD(0x72c, 0x2c8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			IOMUX_PAD(0x72c, 0x2c8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1				IOMUX_PAD(0x730, 0x2cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2				IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1				IOMUX_PAD(0x730, 0x2cc, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				IOMUX_PAD(0x730, 0x2cc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			IOMUX_PAD(0x730, 0x2cc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2				IOMUX_PAD(0x734, 0x2d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3				IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2				IOMUX_PAD(0x734, 0x2d0, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				IOMUX_PAD(0x734, 0x2d0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			IOMUX_PAD(0x734, 0x2d0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK				IOMUX_PAD(0x738, 0x2d4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3				IOMUX_PAD(0x738, 0x2d4, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT				IOMUX_PAD(0x73c, 0x2d8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4				IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG				IOMUX_PAD(0x740, 0x2dc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5				IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				IOMUX_PAD(0x744, 0x2e0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6				IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		IOMUX_PAD(0x744, 0x2e0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				IOMUX_PAD(0x748, 0x2e4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			IOMUX_PAD(0x748, 0x2e4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			IOMUX_PAD(0x748, 0x2e4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7				IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		IOMUX_PAD(0x748, 0x2e4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				IOMUX_PAD(0x74c, 0x2e8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS				IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8				IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			IOMUX_PAD(0x74c, 0x2e8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		IOMUX_PAD(0x74c, 0x2e8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL				IOMUX_PAD(0x750, 0x2ec, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7				IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS				IOMUX_PAD(0x750, 0x2ec, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY				IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9				IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			IOMUX_PAD(0x750, 0x2ec, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			IOMUX_PAD(0x750, 0x2ec, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			IOMUX_PAD(0x754, 0x2f0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO				IOMUX_PAD(0x754, 0x2f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR				IOMUX_PAD(0x754, 0x2f0, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10				IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			IOMUX_PAD(0x754, 0x2f0, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		IOMUX_PAD(0x754, 0x2f0, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			IOMUX_PAD(0x758, 0x2f4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x758, 0x2f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR				IOMUX_PAD(0x758, 0x2f4, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11				IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			IOMUX_PAD(0x758, 0x2f4, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		IOMUX_PAD(0x758, 0x2f4, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				IOMUX_PAD(0x75c, 0x2f8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI				IOMUX_PAD(0x75c, 0x2f8, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12				IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			IOMUX_PAD(0x75c, 0x2f8, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		IOMUX_PAD(0x75c, 0x2f8, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC				IOMUX_PAD(0x760, 0x2fc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN				IOMUX_PAD(0x760, 0x2fc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD				IOMUX_PAD(0x760, 0x2fc, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13				IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				IOMUX_PAD(0x760, 0x2fc, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			IOMUX_PAD(0x760, 0x2fc, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO				IOMUX_PAD(0x764, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14				IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				IOMUX_PAD(0x764, 0x300, 6, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			IOMUX_PAD(0x764, 0x300, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				IOMUX_PAD(0x768, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15				IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		IOMUX_PAD(0x768, 0x304, 7, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				IOMUX_PAD(0x76c, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16				IOMUX_PAD(0x76c, 0x308, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS				IOMUX_PAD(0x770, 0x30c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			IOMUX_PAD(0x770, 0x30c, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5				IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17				IOMUX_PAD(0x770, 0x30c, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			IOMUX_PAD(0x770, 0x30c, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			IOMUX_PAD(0x774, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			IOMUX_PAD(0x774, 0x310, 2, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6				IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18				IOMUX_PAD(0x774, 0x310, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			IOMUX_PAD(0x774, 0x310, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			IOMUX_PAD(0x778, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7				IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19				IOMUX_PAD(0x778, 0x314, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			IOMUX_PAD(0x778, 0x314, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			IOMUX_PAD(0x77c, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20				IOMUX_PAD(0x77c, 0x318, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			IOMUX_PAD(0x780, 0x31c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21				IOMUX_PAD(0x780, 0x31c, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			IOMUX_PAD(0x784, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22				IOMUX_PAD(0x784, 0x320, 6, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			IOMUX_PAD(0x788, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23				IOMUX_PAD(0x788, 0x324, 5, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			IOMUX_PAD(0x78c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			IOMUX_PAD(0x790, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
new file mode 100644
index 00000000000..7cd84547658
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ *	build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+	unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+	unsigned mux_mode:8;
+	unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define	NO_PAD_CTRL	(1 << 16)
+	unsigned pad_ctrl:17;
+	unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+	unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+		_select_input, _pad_ctrl)				\
+		{							\
+			.mux_ctrl_ofs     = _mux_ctrl_ofs,		\
+			.mux_mode         = _mux_mode,			\
+			.pad_ctrl_ofs     = _pad_ctrl_ofs,		\
+			.pad_ctrl         = _pad_ctrl,			\
+			.select_input_ofs = _select_input_ofs,		\
+			.select_input     = _select_input,		\
+		}
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
+
+#define PAD_CTL_NO_HYSTERESIS		0
+#define PAD_CTL_HYSTERESIS		1
+
+#define PAD_CTL_PULL_DISABLED		0x0
+#define PAD_CTL_PULL_KEEPER		0xa
+#define PAD_CTL_PULL_DOWN_100K		0xc
+#define PAD_CTL_PULL_UP_47K		0xd
+#define PAD_CTL_PULL_UP_100K		0xe
+#define PAD_CTL_PULL_UP_22K		0xf
+
+#define PAD_CTL_OUTPUT_CMOS		0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM	0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
+#define PAD_CTL_DRIVE_STRENGTH_MAX	2
+
+#define PAD_CTL_SLEW_RATE_SLOW		0
+#define PAD_CTL_SLEW_RATE_FAST		1
+
+/*
+ * setups a single pad:
+ * 	- reserves the pad so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ * 	- make it available for a future use by another driver
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index eca37d09f3f..6065e00176e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -32,4 +32,12 @@
 #define CONSISTENT_DMA_SIZE SZ_4M
 #endif /* CONFIG_MX1_VIDEO */
 
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index b92e02324d8..1000bf330bc 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,7 +179,7 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
 #define MXC_LL_UART_PADDR	UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 3878c6085d5..b559a4bb576 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -48,6 +48,9 @@
 #define CS4_SIZE		SZ_32M
 
 #define CS5_BASE_ADDR		0xB6000000
+#define CS5_BASE_ADDR_VIRT	0xF6000000
+#define CS5_SIZE		SZ_32M
+
 #define PCMCIA_MEM_BASE_ADDR	0xBC000000
 
 /*
@@ -191,6 +194,9 @@
 #define CS4_IO_ADDRESS(x)  \
 	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
 
+#define CS5_IO_ADDRESS(x)  \
+	(((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
 #define X_MEMC_IO_ADDRESS(x)  \
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
deleted file mode 100644
index 6c19a134744..00000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT		TIM1_INT
-
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_CLK_TIN		(3<<1)
-#define TCTL_CLK_32		(4<<1)
-
-#define MXC_TCTL   0x00
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT1
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG		(1<<6)
-#define TCTL_FRR		(1<<9)
-#define TCTL_WAITEN		(1<<3)
-
-#define MXC_TPRER  0x04
-#define MXC_TSTAT  0x08
-#define TSTAT_OF1		(1<<0)
-#define TSTAT_OF2		(1<<1)
-#define TSTAT_OF3		(1<<2)
-#define TSTAT_IF1		(1<<3)
-#define TSTAT_IF2		(1<<4)
-#define TSTAT_ROV		(1<<5)
-#define MXC_IR     0x0c
-#define MXC_TCMP   0x10
-#define MXC_TCMP2  0x14
-#define MXC_TCMP3  0x18
-#define MXC_TCR    0x1c
-#define MXC_TCN    0x24
-
-static inline void gpt_irq_disable(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR		(1<<15)
-#define TCTL_CC			(1<<10)
-#define TCTL_OM			(1<<9)
-#define TCTL_CAP_RIS		(1<<6)
-#define TCTL_CAP_FAL		(2<<6)
-#define TCTL_CAP_RIS_FAL	(3<<6)
-#define TCTL_CAP_ENA		(1<<5)
-#define TCTL_TEN		(1<<0)
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
index 2dacb3086f1..be273371f34 100644
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ b/arch/arm/plat-mxc/include/mach/usb.h
@@ -17,7 +17,7 @@
 
 struct imxusb_platform_data {
 	int (*init)(struct device *);
-	int (*exit)(struct device *);
+	void (*exit)(struct device *);
 };
 
 #endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
new file mode 100644
index 00000000000..77a078f9513
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                       <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+	unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+		return -EBUSY;
+	if (pad->mux_ctrl_ofs)
+		__raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+	if (pad->select_input_ofs)
+		__raw_writel(pad->select_input,
+				IOMUX_BASE + pad->select_input_ofs);
+
+	if (!(pad->pad_ctrl & NO_PAD_CTRL))
+		__raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+	struct pad_desc *p = pad_list;
+	int i;
+	int ret;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_v3_setup_pad(p);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_v3_release_multiple_pads(pad_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+	unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+	struct pad_desc *p = pad_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_v3_release_pad(p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 0fb68a531f5..8aee76304f8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -24,31 +24,27 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 
-#define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
-#define AVIC_NIMASK		(AVIC_BASE + 0x04)	/* int mask reg */
-#define AVIC_INTENNUM		(AVIC_BASE + 0x08)	/* int enable number reg */
-#define AVIC_INTDISNUM		(AVIC_BASE + 0x0C)	/* int disable number reg */
-#define AVIC_INTENABLEH		(AVIC_BASE + 0x10)	/* int enable reg high */
-#define AVIC_INTENABLEL		(AVIC_BASE + 0x14)	/* int enable reg low */
-#define AVIC_INTTYPEH		(AVIC_BASE + 0x18)	/* int type reg high */
-#define AVIC_INTTYPEL		(AVIC_BASE + 0x1C)	/* int type reg low */
-#define AVIC_NIPRIORITY(x)	(AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR		(AVIC_BASE + 0x40)	/* norm int vector/status */
-#define AVIC_FIVECSR		(AVIC_BASE + 0x44)	/* fast int vector/status */
-#define AVIC_INTSRCH		(AVIC_BASE + 0x48)	/* int source reg high */
-#define AVIC_INTSRCL		(AVIC_BASE + 0x4C)	/* int source reg low */
-#define AVIC_INTFRCH		(AVIC_BASE + 0x50)	/* int force reg high */
-#define AVIC_INTFRCL		(AVIC_BASE + 0x54)	/* int force reg low */
-#define AVIC_NIPNDH		(AVIC_BASE + 0x58)	/* norm int pending high */
-#define AVIC_NIPNDL		(AVIC_BASE + 0x5C)	/* norm int pending low */
-#define AVIC_FIPNDH		(AVIC_BASE + 0x60)	/* fast int pending high */
-#define AVIC_FIPNDL		(AVIC_BASE + 0x64)	/* fast int pending low */
-
-#define SYSTEM_PREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG		IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH		3
-#define IIM_PROD_REV_LEN	5
+#define AVIC_INTCNTL		0x00	/* int control reg */
+#define AVIC_NIMASK		0x04	/* int mask reg */
+#define AVIC_INTENNUM		0x08	/* int enable number reg */
+#define AVIC_INTDISNUM		0x0C	/* int disable number reg */
+#define AVIC_INTENABLEH		0x10	/* int enable reg high */
+#define AVIC_INTENABLEL		0x14	/* int enable reg low */
+#define AVIC_INTTYPEH		0x18	/* int type reg high */
+#define AVIC_INTTYPEL		0x1C	/* int type reg low */
+#define AVIC_NIPRIORITY(x)	(0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR		0x40	/* norm int vector/status */
+#define AVIC_FIVECSR		0x44	/* fast int vector/status */
+#define AVIC_INTSRCH		0x48	/* int source reg high */
+#define AVIC_INTSRCL		0x4C	/* int source reg low */
+#define AVIC_INTFRCH		0x50	/* int force reg high */
+#define AVIC_INTFRCL		0x54	/* int force reg low */
+#define AVIC_NIPNDH		0x58	/* norm int pending high */
+#define AVIC_NIPNDL		0x5C	/* norm int pending low */
+#define AVIC_FIPNDH		0x60	/* fast int pending high */
+#define AVIC_FIPNDL		0x64	/* fast int pending low */
+
+static void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 	if (irq >= MXC_INTERNAL_IRQS)
 		return -EINVAL;;
 
-	temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+	temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
 	temp &= ~mask;
 	temp |= prio & mask;
 
-	__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+	__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
 
 	return 0;
 #else
@@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	if (irq < MXC_INTERNAL_IRQS / 2) {
-		irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
 	} else {
 		irq -= MXC_INTERNAL_IRQS / 2;
-		irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
 	}
 
 	return 0;
@@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq);
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
-	__raw_writel(irq, AVIC_INTDISNUM);
+	__raw_writel(irq, avic_base + AVIC_INTDISNUM);
 }
 
 /* Enable interrupt number "irq" in the AVIC */
 static void mxc_unmask_irq(unsigned int irq)
 {
-	__raw_writel(irq, AVIC_INTENNUM);
+	__raw_writel(irq, avic_base + AVIC_INTENNUM);
 }
 
 static struct irq_chip mxc_avic_chip = {
@@ -121,19 +117,21 @@ void __init mxc_init_irq(void)
 {
 	int i;
 
+	avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
 	 */
-	__raw_writel(0, AVIC_INTCNTL);
-	__raw_writel(0x1f, AVIC_NIMASK);
+	__raw_writel(0, avic_base + AVIC_INTCNTL);
+	__raw_writel(0x1f, avic_base + AVIC_NIMASK);
 
 	/* disable all interrupts */
-	__raw_writel(0, AVIC_INTENABLEH);
-	__raw_writel(0, AVIC_INTENABLEL);
+	__raw_writel(0, avic_base + AVIC_INTENABLEH);
+	__raw_writel(0, avic_base + AVIC_INTENABLEL);
 
 	/* all IRQ no FIQ */
-	__raw_writel(0, AVIC_INTTYPEH);
-	__raw_writel(0, AVIC_INTTYPEL);
+	__raw_writel(0, avic_base + AVIC_INTTYPEH);
+	__raw_writel(0, avic_base + AVIC_INTTYPEL);
 	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
 		set_irq_chip(i, &mxc_avic_chip);
 		set_irq_handler(i, handle_level_irq);
@@ -142,7 +140,7 @@ void __init mxc_init_irq(void)
 
 	/* Set default priority value (0) for all IRQ's */
 	for (i = 0; i < 8; i++)
-		__raw_writel(0, AVIC_NIPRIORITY(i));
+		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
 	/* init architectures chained interrupt handler */
 	mxc_register_gpios();
@@ -154,3 +152,4 @@ void __init mxc_init_irq(void)
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
+
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 9bffbc507cc..ae34198a79d 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -15,65 +15,26 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC    0x00   /* PWM Control Register */
+#define MX1_PWMS    0x04   /* PWM Sample Register */
+#define MX1_PWMP    0x08   /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR                 0x00    /* PWM Control Register */
+#define MX3_PWMSAR                0x0C    /* PWM Sample Register */
+#define MX3_PWMPR                 0x10    /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN              (1 << 0)
+
 
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-
-#define PWMCR	0x00	/* PWM Control Register		*/
-#define PWMSR	0x04	/* PWM Sample Register		*/
-#define PWMPR	0x08	/* PWM Period Register		*/
-#define PWMCNR	0x0C	/* PWM Counter Register		*/
-
-#define PWMCR_HCTR		(1 << 18)		/* Halfword FIFO Data Swapping	*/
-#define PWMCR_BCTR		(1 << 17)		/* Byte FIFO Data Swapping	*/
-#define PWMCR_SWR		(1 << 16)		/* Software Reset		*/
-#define PWMCR_CLKSRC_PERCLK	(0 << 15)		/* PERCLK Clock Source		*/
-#define PWMCR_CLKSRC_CLK32	(1 << 15)		/* 32KHz Clock Source		*/
-#define PWMCR_PRESCALER(x)	(((x - 1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMCR_IRQ		(1 << 7)		/* Interrupt Request		*/
-#define PWMCR_IRQEN		(1 << 6)		/* Interrupt Request Enable	*/
-#define PWMCR_FIFOAV		(1 << 5)		/* FIFO Available		*/
-#define PWMCR_EN		(1 << 4)		/* Enables/Disables the PWM	*/
-#define PWMCR_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMCR_DIV(x)		(((x) & 0x03) << 0)	/* Clock divider 2/4/8/16	*/
-
-#define MAX_DIV			(128 * 16)
-#endif
-
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
-
-#define PWMCR	0x00	/* PWM Control Register		*/
-#define PWMSR	0x04	/* PWM Status Register		*/
-#define PWMIR	0x08	/* PWM Interrupt Register	*/
-#define PWMSAR	0x0C	/* PWM Sample Register		*/
-#define PWMPR	0x10	/* PWM Period Register		*/
-#define PWMCNR	0x14	/* PWM Counter Register		*/
-
-#define PWMCR_EN		(1 << 0)		/* Enables/Disables the PWM	*/
-#define PWMCR_REPEAT(x)		(((x) & 0x03) << 1)	/* Sample Repeats		*/
-#define PWMCR_SWR		(1 << 3)		/* Software Reset		*/
-#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)/* PRESCALER			*/
-#define PWMCR_CLKSRC(x)		(((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF	(0 << 16)
-#define PWMCR_CLKSRC_IPG	(1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
-#define PWMCR_CLKSRC_CLK32	(3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR		(1 << 20)		/* Halfword FIFO Data Swapping	*/
-#define PWMCR_BCTR		(1 << 21)		/* Byte FIFO Data Swapping	*/
-#define PWMCR_DBGEN		(1 << 22)		/* Debug Mode			*/
-#define PWMCR_WAITEN		(1 << 23)		/* Wait Mode			*/
-#define PWMCR_DOZEN		(1 << 24)		/* Doze Mode			*/
-#define PWMCR_STOPEN		(1 << 25)		/* Stop Mode			*/
-#define PWMCR_FWM(x)		(((x) & 0x3) << 26)	/* FIFO Water Mark		*/
-
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
 
 struct pwm_device {
 	struct list_head	node;
@@ -91,32 +52,52 @@ struct pwm_device {
 
 int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 {
-	unsigned long long c;
-	unsigned long period_cycles, duty_cycles, prescale;
-
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	c = clk_get_rate(pwm->clk);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	prescale = period_cycles / 0x10000 + 1;
-
-	period_cycles /= prescale;
-	c = (unsigned long long)period_cycles * duty_ns;
-	do_div(c, period_ns);
-	duty_cycles = c;
-
-#ifdef PWM_VER_2
-	writel(duty_cycles, pwm->mmio_base + PWMSAR);
-	writel(period_cycles, pwm->mmio_base + PWMPR);
-	writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
-			pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+	if (cpu_is_mx27() || cpu_is_mx3()) {
+		unsigned long long c;
+		unsigned long period_cycles, duty_cycles, prescale;
+		c = clk_get_rate(pwm->clk);
+		c = c * period_ns;
+		do_div(c, 1000000000);
+		period_cycles = c;
+
+		prescale = period_cycles / 0x10000 + 1;
+
+		period_cycles /= prescale;
+		c = (unsigned long long)period_cycles * duty_ns;
+		do_div(c, period_ns);
+		duty_cycles = c;
+
+		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+		writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+			pwm->mmio_base + MX3_PWMCR);
+	} else if (cpu_is_mx1() || cpu_is_mx21()) {
+		/* The PWM subsystem allows for exact frequencies. However,
+		 * I cannot connect a scope on my device to the PWM line and
+		 * thus cannot provide the program the PWM controller
+		 * exactly. Instead, I'm relying on the fact that the
+		 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+		 * function group already. So I'll just modify the PWM sample
+		 * register to follow the ratio of duty_ns vs. period_ns
+		 * accordingly.
+		 *
+		 * This is good enought for programming the brightness of
+		 * the LCD backlight.
+		 *
+		 * The real implementation would divide PERCLK[0] first by
+		 * both the prescaler (/1 .. /128) and then by CLKSEL
+		 * (/2 .. /16).
+		 */
+		u32 max = readl(pwm->mmio_base + MX1_PWMP);
+		u32 p = max * duty_ns / period_ns;
+		writel(max - p, pwm->mmio_base + MX1_PWMS);
+	} else {
+		BUG();
+	}
 
 	return 0;
 }
@@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index dab3357196f..88fb3a57e02 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -29,22 +29,85 @@
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL		0x00
+#define MXC_TCTL_TEN		(1 << 0)
+#define MXC_TPRER		0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1	(1 << 1)
+#define MX1_2_TCTL_IRQEN	(1 << 4)
+#define MX1_2_TCTL_FRR		(1 << 8)
+#define MX1_2_TCMP		0x08
+#define MX1_2_TCN		0x10
+#define MX1_2_TSTAT		0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT		(1 << 1)
+#define MX2_TSTAT_COMP		(1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN		(1 << 3)
+#define MX3_TCTL_CLK_IPG	(1 << 6)
+#define MX3_TCTL_FRR		(1 << 9)
+#define MX3_IR			0x0c
+#define MX3_TSTAT		0x08
+#define MX3_TSTAT_OF1		(1 << 0)
+#define MX3_TCN			0x24
+#define MX3_TCMP		0x10
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
-/* clock source */
+static void __iomem *timer_base;
 
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
 {
-	return __raw_readl(TIMER_BASE + MXC_TCN);
+	unsigned int tmp;
+
+	if (cpu_is_mx3())
+		__raw_writel(0, timer_base + MX3_IR);
+	else {
+		tmp = __raw_readl(timer_base + MXC_TCTL);
+		__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+	}
+}
+
+static inline void gpt_irq_enable(void)
+{
+	if (cpu_is_mx3())
+		__raw_writel(1<<0, timer_base + MX3_IR);
+	else {
+		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+			timer_base + MXC_TCTL);
+	}
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	if (cpu_is_mx1())
+		__raw_writel(0, timer_base + MX1_2_TSTAT);
+	if (cpu_is_mx2())
+		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+	if (cpu_is_mx3())
+		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + MX3_TCN);
 }
 
 static struct clocksource clocksource_mxc = {
 	.name 		= "mxc_timer1",
 	.rating		= 200,
-	.read		= mxc_get_cycles,
+	.read		= mx1_2_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift 		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
+	if (cpu_is_mx3())
+		clocksource_mxc.read = mx3_get_cycles;
+
 	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
 	clocksource_register(&clocksource_mxc);
@@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 
 /* clock event */
 
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
 			      struct clock_event_device *unused)
 {
 	unsigned long tcmp;
 
-	tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
-	__raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+	tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
 
-	return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+	__raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+	return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+				-ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+
+	tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+	__raw_writel(tcmp, timer_base + MX3_TCMP);
+
+	return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
 				-ETIME : 0;
 }
 
@@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		__raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
-				TIMER_BASE + MXC_TCMP);
+		if (cpu_is_mx3())
+			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+					timer_base + MX3_TCMP);
+		else
+			__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+					timer_base + MX1_2_TCMP);
+
 		/* Clear pending interrupt */
 		gpt_irq_acknowledge();
 	}
@@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+	if (cpu_is_mx3())
+		tstat = __raw_readl(timer_base + MX3_TSTAT);
+	else
+		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
 
 	gpt_irq_acknowledge();
 
@@ -168,7 +256,7 @@ static struct clock_event_device clockevent_mxc = {
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_mode	= mxc_set_mode,
-	.set_next_event	= mxc_set_next_event,
+	.set_next_event	= mx1_2_set_next_event,
 	.rating		= 200,
 };
 
@@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
+	if (cpu_is_mx3())
+		clockevent_mxc.set_next_event = mx3_set_next_event;
+
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
 	clockevent_mxc.max_delta_ns =
@@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 
 void __init mxc_timer_init(struct clk *timer_clk)
 {
+	uint32_t tctl_val;
+	int irq;
+
 	clk_enable(timer_clk);
 
+	if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+		irq = TIM1_INT;
+#endif
+	} else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+		irq = MXC_INT_GPT1;
+#endif
+	} else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+		irq = MXC_INT_GPT;
+#endif
+	} else
+		BUG();
+
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
 	 */
-	__raw_writel(0, TIMER_BASE + MXC_TCTL);
-	__raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
 
-	__raw_writel(TCTL_FRR |	/* free running */
-		     TCTL_VAL |	/* set clocksource and arch specific bits */
-		     TCTL_TEN,	/* start the timer */
-		     TIMER_BASE + MXC_TCTL);
+	__raw_writel(0, timer_base + MXC_TCTL);
+	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+	if (cpu_is_mx3())
+		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+	else
+		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+	__raw_writel(tctl_val, timer_base + MXC_TCTL);
 
 	/* init and register the timer to the framework */
 	mxc_clocksource_init(timer_clk);
 	mxc_clockevent_init(timer_clk);
 
 	/* Make irqs happen */
-	setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+	setup_irq(irq, &mxc_timer_irq);
 }
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 9dd68fafb37..efe85d09519 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -23,6 +23,11 @@ config ARCH_OMAP3
 	select CPU_V7
 	select COMMON_CLKDEV
 
+config ARCH_OMAP4
+	bool "TI OMAP4"
+	select CPU_V7
+	select ARM_GIC
+
 endchoice
 
 comment "OMAP Feature Selections"
@@ -40,7 +45,6 @@ config OMAP_DEBUG_LEDS
 config OMAP_DEBUG_POWERDOMAIN
 	bool "Emit debug messages from powerdomain layer"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
-	default n
 	help
 	  Say Y here if you want to compile in powerdomain layer
 	  debugging messages for OMAP2/3.   These messages can
@@ -52,7 +56,6 @@ config OMAP_DEBUG_POWERDOMAIN
 config OMAP_DEBUG_CLOCKDOMAIN
 	bool "Emit debug messages from clockdomain layer"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
-	default n
 	help
 	  Say Y here if you want to compile in clockdomain layer
 	  debugging messages for OMAP2/3.   These messages can
@@ -110,11 +113,13 @@ config OMAP_MCBSP
 config OMAP_MBOX_FWK
 	tristate "Mailbox framework support"
 	depends on ARCH_OMAP
-	default n
 	help
 	  Say Y here if you want to use OMAP Mailbox framework support for
 	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
 
+config OMAP_IOMMU
+	tristate
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
@@ -128,13 +133,13 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX and 34XX.
+	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
 
 endchoice
 
@@ -149,7 +154,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
@@ -171,7 +176,7 @@ endchoice
 
 config OMAP_SERIAL_WAKE
 	bool "Enable wake-up events for serial ports"
-	depends on OMAP_MUX
+	depends on ARCH_OMAP1 && OMAP_MUX
 	default y
 	help
 	  Select this option if you want to have your system wake up
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 04a100cfb8e..a8327952395 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -13,6 +13,7 @@ obj-  :=
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 29efc279287..e8c327a45a5 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,40 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
+/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
+ * clock framework is not up , it is defined here to avoid rework in
+ * every driver. Also dummy prcm reset function is added */
+
+/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
+#if defined(CONFIG_ARCH_OMAP4)
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+void omap2_clk_prepare_for_reboot(void)
+{
+}
+EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
+
+void omap_prcm_arch_reset(char mode)
+{
+}
+EXPORT_SYMBOL(omap_prcm_arch_reset);
+#endif
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
+	if (cpu_is_omap44xx())
+		/* OMAP4 clk framework not supported yet */
+		return 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
@@ -140,6 +170,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long flags;
 	int ret = -EINVAL;
 
+	if (cpu_is_omap44xx())
+	/* OMAP4 clk framework not supported yet */
+		return 0;
 	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
 		return ret;
 
@@ -240,13 +273,13 @@ void recalculate_root_clocks(void)
 }
 
 /**
- * clk_init_one - initialize any fields in the struct clk before clk init
+ * clk_preinit - initialize any fields in the struct clk before clk init
  * @clk: struct clk * to initialize
  *
  * Initialize any struct clk fields needed before normal clk initialization
  * can run.  No return value.
  */
-void clk_init_one(struct clk *clk)
+void clk_preinit(struct clk *clk)
 {
 	INIT_LIST_HEAD(&clk->children);
 }
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 433021f3d7c..ebcf006406f 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
  * linux/arch/arm/plat-omap/common.c
  *
  * Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/console.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
@@ -175,25 +178,70 @@ console_initcall(omap_add_serial_console);
  * but systems won't necessarily want to spend resources that way.
  */
 
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP2_32KSYNCT_BASE + 0x10)
-#endif
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
 
-#ifdef	TIMER_32K_SYNCHRONIZED
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
 
 #include <linux/clocksource.h>
 
-static cycle_t omap_32k_read(struct clocksource *cs)
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+}
+#else
+#define omap16xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2420_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2430_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap34xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(TIMER_32K_SYNCHRONIZED);
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read	NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+	return 0;
 }
 
 static struct clocksource clocksource_32k = {
 	.name		= "32k_counter",
 	.rating		= 250,
-	.read		= omap_32k_read,
+	.read		= omap_32k_read_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -207,7 +255,7 @@ unsigned long long sched_clock(void)
 {
 	unsigned long long ret;
 
-	ret = (unsigned long long)omap_32k_read(&clocksource_32k);
+	ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
 	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
 	return ret;
 }
@@ -220,6 +268,19 @@ static int __init omap_init_clocksource_32k(void)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		struct clk *sync_32k_ick;
 
+		if (cpu_is_omap16xx())
+			clocksource_32k.read = omap16xx_32k_read;
+		else if (cpu_is_omap2420())
+			clocksource_32k.read = omap2420_32k_read;
+		else if (cpu_is_omap2430())
+			clocksource_32k.read = omap2430_32k_read;
+		else if (cpu_is_omap34xx())
+			clocksource_32k.read = omap34xx_32k_read;
+		else if (cpu_is_omap44xx())
+			clocksource_32k.read = omap44xx_32k_read;
+		else
+			return -ENODEV;
+
 		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
 		if (sync_32k_ick)
 			clk_enable(sync_32k_ick);
@@ -234,15 +295,13 @@ static int __init omap_init_clocksource_32k(void)
 }
 arch_initcall(omap_init_clocksource_32k);
 
-#endif	/* TIMER_32K_SYNCHRONIZED */
+#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
 
 /* Global address base setup code */
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
-static struct omap_globals *omap2_globals;
-
-static void __init __omap2_set_globals(void)
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 {
 	omap2_set_globals_tap(omap2_globals);
 	omap2_set_globals_sdrc(omap2_globals);
@@ -266,8 +325,7 @@ static struct omap_globals omap242x_globals = {
 
 void __init omap2_set_globals_242x(void)
 {
-	omap2_globals = &omap242x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap242x_globals);
 }
 #endif
 
@@ -285,8 +343,7 @@ static struct omap_globals omap243x_globals = {
 
 void __init omap2_set_globals_243x(void)
 {
-	omap2_globals = &omap243x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap243x_globals);
 }
 #endif
 
@@ -304,8 +361,23 @@ static struct omap_globals omap343x_globals = {
 
 void __init omap2_set_globals_343x(void)
 {
-	omap2_globals = &omap343x_globals;
-	__omap2_set_globals();
+	__omap2_set_globals(&omap343x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+	.class	= OMAP443X_CLASS,
+	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
+	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+	omap2_set_globals_tap(&omap4_globals);
+	omap2_set_globals_control(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff4179..a64b692a1bf 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@ static void omap_init_wdt(void)
 		wdt_resources[0].start = 0x49016000; /* WDT2 */
 	else if (cpu_is_omap343x())
 		wdt_resources[0].start = 0x48314000; /* WDT2 */
+	else if (cpu_is_omap44xx())
+		wdt_resources[0].start = 0x4a314000;
 	else
 		return;
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fc8c045ad5..def14ec265b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
  * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * Support functions for the OMAP internal DMA channels.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -310,41 +313,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
-	u16 w;
-
 	BUG_ON(omap_dma_in_1510_mode());
 
-	if (cpu_class_is_omap2()) {
-		REVISIT_24XX();
-		return;
-	}
+	if (cpu_class_is_omap1()) {
+		u16 w;
 
-	w = dma_read(CCR2(lch));
-	w &= ~0x03;
+		w = dma_read(CCR2(lch));
+		w &= ~0x03;
 
-	switch (mode) {
-	case OMAP_DMA_CONSTANT_FILL:
-		w |= 0x01;
-		break;
-	case OMAP_DMA_TRANSPARENT_COPY:
-		w |= 0x02;
-		break;
-	case OMAP_DMA_COLOR_DIS:
-		break;
-	default:
-		BUG();
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			w |= 0x01;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			w |= 0x02;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(w, CCR2(lch));
+
+		w = dma_read(LCH_CTRL(lch));
+		w &= ~0x0f;
+		/* Default is channel type 2D */
+		if (mode) {
+			dma_write((u16)color, COLOR_L(lch));
+			dma_write((u16)(color >> 16), COLOR_U(lch));
+			w |= 1;		/* Channel type G */
+		}
+		dma_write(w, LCH_CTRL(lch));
 	}
-	dma_write(w, CCR2(lch));
 
-	w = dma_read(LCH_CTRL(lch));
-	w &= ~0x0f;
-	/* Default is channel type 2D */
-	if (mode) {
-		dma_write((u16)color, COLOR_L(lch));
-		dma_write((u16)(color >> 16), COLOR_U(lch));
-		w |= 1;		/* Channel type G */
+	if (cpu_class_is_omap2()) {
+		u32 val;
+
+		val = dma_read(CCR(lch));
+		val &= ~((1 << 17) | (1 << 16));
+
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			val |= 1 << 16;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			val |= 1 << 17;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(val, CCR(lch));
+
+		color &= 0xffffff;
+		dma_write(color, COLOR(lch));
 	}
-	dma_write(w, LCH_CTRL(lch));
 }
 EXPORT_SYMBOL(omap_set_dma_color_mode);
 
@@ -851,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 	}
 	l = dma_read(CCR(lch));
 	l &= ~((1 << 6) | (1 << 26));
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
 		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
 		l |= ((read_prio & 0x1) << 6);
@@ -1199,7 +1223,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
-			   void (*callback) (int chain_id, u16 ch_status,
+			   void (*callback) (int lch, u16 ch_status,
 					     void *data),
 			   int *chain_id, int no_of_chans, int chain_mode,
 			   struct omap_dma_channel_params params)
@@ -1823,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 #define omap1_dma_irq_handler	NULL
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 static int omap2_dma_handle_ch(int ch)
 {
@@ -2318,6 +2343,9 @@ static int __init omap_init_dma(void)
 	} else if (cpu_is_omap34xx()) {
 		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+	} else if (cpu_is_omap44xx()) {
+		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
@@ -2416,12 +2444,18 @@ static int __init omap_init_dma(void)
 		}
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
 		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
 				DMA_DEFAULT_FIFO_DEPTH, 0);
 
-	if (cpu_class_is_omap2())
-		setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+	if (cpu_class_is_omap2()) {
+		int irq;
+		if (cpu_is_omap44xx())
+			irq = INT_44XX_SDMA_IRQ0;
+		else
+			irq = INT_24XX_SDMA_IRQ0;
+		setup_irq(irq, &omap24xx_dma_irq);
+	}
 
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 55bb9963129..7f50b6103de 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
  * OMAP2 support by Juha Yrjola
  * API improvements and OMAP2 clock framework support by Timo Teras
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
 struct omap_dm_timer {
 	unsigned long phys_base;
 	int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 	struct clk *iclk, *fclk;
 #endif
 	void __iomem *io_base;
@@ -169,6 +173,9 @@ struct omap_dm_timer {
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap1_dm_timers[] = {
 	{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
 #define omap3_dm_timers			NULL
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap2_dm_timers[] = {
 	{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -214,7 +224,7 @@ static const char *omap2_dm_source_names[] __initdata = {
 	NULL
 };
 
-static struct clk **omap2_dm_source_clocks[3];
+static struct clk *omap2_dm_source_clocks[3];
 static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 
 #elif defined(CONFIG_ARCH_OMAP3)
@@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 #define omap2_dm_timers			NULL
 #define omap2_dm_source_names		NULL
 #define omap2_dm_source_clocks		NULL
+#define omap4_dm_timers			NULL
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
 
 static struct omap_dm_timer omap3_dm_timers[] = {
 	{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -247,9 +260,43 @@ static const char *omap3_dm_source_names[] __initdata = {
 	NULL
 };
 
-static struct clk **omap3_dm_source_clocks[2];
+static struct clk *omap3_dm_source_clocks[2];
 static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x)		clk_enable(x)
+#define omap_dm_clk_disable(x)		clk_disable(x)
+#define omap1_dm_timers			NULL
+#define omap2_dm_timers			NULL
+#define omap2_dm_source_names		NULL
+#define omap2_dm_source_clocks		NULL
+#define omap3_dm_timers			NULL
+#define omap3_dm_source_names		NULL
+#define omap3_dm_source_clocks		NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+	{ .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+	{ .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+	{ .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+	{ .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+	{ .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+	{ .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+	{ .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+	{ .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+	{ .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+	{ .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+	"sys_ck",
+	"omap_32k_fck",
+	NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
 #else
 
 #error OMAP architecture not supported!
@@ -257,7 +304,7 @@ static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 #endif
 
 static struct omap_dm_timer *dm_timers;
-static char **dm_source_names;
+static const char **dm_source_names;
 static struct clk **dm_source_clocks;
 
 static spinlock_t dm_timer_lock;
@@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
@@ -705,12 +753,16 @@ int __init omap_dm_timer_init(void)
 		dm_timers = omap1_dm_timers;
 	else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
-		dm_source_names = (char **)omap2_dm_source_names;
-		dm_source_clocks = (struct clk **)omap2_dm_source_clocks;
+		dm_source_names = omap2_dm_source_names;
+		dm_source_clocks = omap2_dm_source_clocks;
 	} else if (cpu_is_omap34xx()) {
 		dm_timers = omap3_dm_timers;
-		dm_source_names = (char **)omap3_dm_source_names;
-		dm_source_clocks = (struct clk **)omap3_dm_source_clocks;
+		dm_source_names = omap3_dm_source_names;
+		dm_source_clocks = omap3_dm_source_clocks;
+	} else if (cpu_is_omap44xx()) {
+		dm_timers = omap4_dm_timers;
+		dm_source_names = omap4_dm_source_names;
+		dm_source_clocks = omap4_dm_source_clocks;
 	}
 
 	if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void)
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
 		timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
 			char clk_name[16];
 			sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index ee0b21f5b09..7fd89ba8d3b 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2003-2005 Nokia Corporation
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -146,6 +149,16 @@
 #define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
 #define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
 
+/*
+ * OMAP44XX  specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
+
 #define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
 
 struct gpio_bank {
@@ -153,11 +166,13 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||  \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 
@@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = {
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+		METHOD_GPIO_24XX },
+};
+
+#endif
+
 static struct gpio_bank *gpio_bank;
 static int gpio_bank_count;
 
@@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 	}
 	if (cpu_is_omap24xx())
 		return &gpio_bank[gpio >> 5];
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return &gpio_bank[gpio >> 5];
 	BUG();
 	return NULL;
@@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio)
 		return gpio & 0x1f;
 	if (cpu_is_omap24xx())
 		return gpio & 0x1f;
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		return gpio & 0x1f;
 	return gpio & 0x0f;
 }
@@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 192)
+	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
 		return 0;
 	return -1;
 }
@@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
@@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
 	else
 		goto done;
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		if (enable)
 			clk_enable(bank->dbck);
 		else
@@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 						int trigger)
 {
@@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
 		break;
@@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
@@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
@@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_24XX:
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
 			printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
@@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 /*---------------------------------------------------------------------*/
 
 static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
 static struct clk * gpio_ick;
 #endif
 
@@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick;
 static struct clk * gpio5_fck;
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
@@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3)
-	if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
 			sprintf(clk_name, "gpio%d_ick", i + 1);
 			gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void)
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		int rev;
+
+		gpio_bank_count = OMAP34XX_NR_GPIOS;
+		gpio_bank = gpio_bank_44xx;
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+			(rev >> 4) & 0x0f, rev & 0x0f);
+	}
+#endif
 	for (i = 0; i < gpio_bank_count; i++) {
 		int j, gpio_count = 16;
 
@@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 730 has 32-bit GPIOs */
 		}
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		if (bank->method == METHOD_GPIO_24XX) {
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void)
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);
 		set_irq_data(bank->irq, bank);
 
-		if (cpu_is_omap34xx()) {
+		if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 			sprintf(clk_name, "gpio%d_dbck", i + 1);
 			bank->dbck = clk_get(NULL, clk_name);
 			if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 {
 	int i;
@@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = {
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 
 static int workaround_enabled;
 
@@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+				defined(CONFIG_ARCH_OMAP4)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void)
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
@@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void)
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 #endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void)
 
 	mpuio_init();
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		if (ret == 0) {
 			ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 			irqstat = irq_desc[irq].status;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
-		defined(CONFIG_ARCH_OMAP34XX)
+		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
 				char	*trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a303071d5e3..8b848391f0c 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2007 Nokia Corporation.
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5569f..f9f65e1ba3f 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@ struct clkops {
 	void			(*disable)(struct clk *);
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 
 struct clksel_rate {
 	u32			val;
@@ -51,7 +52,7 @@ struct dpll_data {
 	u8			max_divider;
 	u32			max_tolerance;
 	u16			max_multiplier;
-#  if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	u8			modes;
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
@@ -83,7 +84,8 @@ struct clk {
 	void			(*init)(struct clk *);
 	__u8			enable_bit;
 	__s8			usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 	u8			fixed_div;
 	void __iomem		*clksel_reg;
 	u32			clksel_mask;
@@ -119,7 +121,7 @@ struct clk_functions {
 extern unsigned int mpurate;
 
 extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_init_one(struct clk *clk);
+extern void clk_preinit(struct clk *clk);
 extern int clk_register(struct clk *clk);
 extern void clk_reparent(struct clk *child, struct clk *parent);
 extern void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36deb17..fdeab421b4d 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -33,8 +33,6 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-extern void omap_serial_enable_clocks(int enable);
 #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
@@ -62,6 +60,7 @@ struct omap_globals {
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f3836..8140dbccb7b 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
 /*
  * arch/arm/plat-omap/include/mach/control.h
  *
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Written by Paul Walmsley
@@ -144,6 +144,10 @@
 #define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
 #define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -189,8 +193,18 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT	0
+#define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE		(0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
+
 #ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
 extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b14425236..fc60c4ebcc2 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
  *
+ * Copyright (C) 2009 Texas Instruments.
+ *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #define cpu_is_omap243x()		0
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap343x()		0
+#define cpu_is_omap44xx()		0
+#define cpu_is_omap443x()		0
 
 #if defined(MULTI_OMAP1)
 # if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_omap3430()		is_omap3430()
 #endif
 
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx()		1
+# define cpu_is_omap443x()		1
+# endif
+
 /* Macros to detect if we have OMAP1 or OMAP2 */
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
+				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
@@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
 
+#define OMAP443X_CLASS		0x44300034
+
 /*
  * omap_chip bits
  *
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c6a2d..ac24050e341 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
 		add	\rx, \rx, #0x00004000	@ UART 3
 #endif
 
-#elif	CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 		moveq	\rx, #0x48000000	@ physical base address
 		movne	\rx, #0xd8000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 54fe9665b18..8c1eae88737 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
 /* Hardware registers for omap2 and omap3 */
 #define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
 #define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE		(L4_44XX_BASE + 0x56000)
 
 #define OMAP_DMA4_REVISION		0x00
 #define OMAP_DMA4_GCR			0x78
@@ -144,6 +145,7 @@
 #define OMAP_DMA4_CSSA_U(n)		0
 #define OMAP_DMA4_CDSA_L(n)		0
 #define OMAP_DMA4_CDSA_U(n)		0
+#define OMAP1_DMA_COLOR(n)		0
 
 /*----------------------------------------------------------------------------*/
 
@@ -531,7 +533,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi);
 /* Chaining APIs */
 #ifndef CONFIG_ARCH_OMAP1
 extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int chain_id, u16 ch_status,
+				  void (*callback) (int lch, u16 ch_status,
 						    void *data),
 				  int *chain_id, int no_of_chans,
 				  int chain_mode,
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 2276f89671d..56426ed45ef 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
  *
  * Low-level IRQ helper macros for OMAP-based platforms
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This file is licensed under  the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <mach/irqs.h>
+#include <asm/hardware/gic.h>
 
 #if defined(CONFIG_ARCH_OMAP1)
 
@@ -56,15 +60,21 @@
 		.endm
 
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+			defined(CONFIG_ARCH_OMAP4)
 
-#if defined(CONFIG_ARCH_OMAP24XX)
 #include <mach/omap24xx.h>
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
 #include <mach/omap34xx.h>
-#endif
 
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
 #define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
 #define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
 
@@ -77,6 +87,7 @@
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
+#ifndef CONFIG_ARCH_OMAP4
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =OMAP2_VA_IC_BASE
 		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -92,6 +103,68 @@
 		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
 
 		.endm
+#else
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020.  The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt.
+		 * We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr     \tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc   \irqnr, \irqnr
+		cmpne   \irqnr, \tmp
+		cmpcs   \irqnr, \irqnr
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt
+		 * on the controller, since this requires the original irqstat
+		 * value which we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		it	cc
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		it	cs
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		itt	eq
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
+#endif
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
new file mode 100644
index 00000000000..b64fbee4d56
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96	(1 << 4)
+#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+	int	cs;
+	int	gpio_irq;
+	int	gpio_pwrdwn;
+	int	gpio_reset;
+	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
+	u32	flags;
+	int	(*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+	defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data	NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423ed3e8..26c1fbff08a 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
 #include "omap16xx.h"
 #include "omap24xx.h"
 #include "omap34xx.h"
+#include "omap44xx.h"
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492f2d3..886248d32b4 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -2,10 +2,6 @@
 #define _HWA742_H
 
 struct hwa742_platform_data {
-	void		(*power_up)(struct device *dev);
-	void		(*power_down)(struct device *dev);
-	unsigned long	(*get_clock_rate)(struct device *dev);
-
 	unsigned	te_connected:1;
 };
 
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e2b3d..3b281472056 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
  * Copied from arch/arm/mach-sa1100/include/mach/io.h
  * Copyright (C) 1997-1999 Russell King
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS		L3_44XX_BASE
+#define L3_44XX_VIRT		0xd4000000
+#define L3_44XX_SIZE		SZ_1M
+
+#define L4_44XX_PHYS		L4_44XX_BASE
+#define L4_44XX_VIRT		0xda000000
+#define L4_44XX_SIZE		SZ_4M
+
+
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT		0xda300000
+#define L4_WK_44XX_SIZE		SZ_1M
+
+#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT	0xd8000000
+#define L4_PER_44XX_SIZE	SZ_4M
+
+#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT	0xe4000000
+#define L4_EMU_44XX_SIZE	SZ_64M
+
+#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT	0xe0000000
+#define OMAP44XX_GPMC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
 #endif
 
 #define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
new file mode 100644
index 00000000000..769b00b4c34
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -0,0 +1,168 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+	u32 da;
+	u32 pa;
+	u32 pgsz, prsvd, valid;
+	union {
+		u16 ap;
+		struct {
+			u32 endian, elsz, mixed;
+		};
+	};
+};
+
+struct iommu {
+	const char	*name;
+	struct module	*owner;
+	struct clk	*clk;
+	void __iomem	*regbase;
+	struct device	*dev;
+
+	unsigned int	refcount;
+	struct mutex	iommu_lock;	/* global for this whole object */
+
+	/*
+	 * We don't change iopgd for a situation like pgd for a task,
+	 * but share it globally for each iommu.
+	 */
+	u32		*iopgd;
+	spinlock_t	page_table_lock; /* protect iopgd */
+
+	int		nr_tlb_entries;
+
+	struct list_head	mmap;
+	struct mutex		mmap_lock; /* protect mmap */
+
+	int (*isr)(struct iommu *obj);
+
+	void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+	union {
+		struct {
+			u16 cam_l;
+			u16 cam_h;
+		};
+		u32 cam;
+	};
+	union {
+		struct {
+			u16 ram_l;
+			u16 ram_h;
+		};
+		u32 ram;
+	};
+};
+
+struct iotlb_lock {
+	short base;
+	short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+	unsigned long	version;
+
+	int (*enable)(struct iommu *obj);
+	void (*disable)(struct iommu *obj);
+	u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+	void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+	void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+	struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+	int (*cr_valid)(struct cr_regs *cr);
+	u32 (*cr_to_virt)(struct cr_regs *cr);
+	void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+	ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+	u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+	void (*save_ctx)(struct iommu *obj);
+	void (*restore_ctx)(struct iommu *obj);
+	ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+};
+
+struct iommu_platform_data {
+	const char *name;
+	const char *clk_name;
+	const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <mach/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes)			\
+	(((bytes) >= SZ_16M) ? SZ_16M :		\
+	 ((bytes) >= SZ_1M)  ? SZ_1M  :		\
+	 ((bytes) >= SZ_64K) ? SZ_64K :		\
+	 ((bytes) >= SZ_4K)  ? SZ_4K  :	0)
+
+#define bytes_to_iopgsz(bytes)				\
+	(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :	\
+	 ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :	\
+	 ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :	\
+	 ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
+
+#define iopgsz_to_bytes(iopgsz)				\
+	(((iopgsz) == MMU_CAM_PGSZ_16M)	? SZ_16M :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_1M)	? SZ_1M  :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_64K)	? SZ_64K :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_4K)	? SZ_4K  : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+				int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h
new file mode 100644
index 00000000000..10ad05f410e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION		0x00
+#define MMU_SYSCONFIG		0x10
+#define MMU_SYSSTATUS		0x14
+#define MMU_IRQSTATUS		0x18
+#define MMU_IRQENABLE		0x1c
+#define MMU_WALKING_ST		0x40
+#define MMU_CNTL		0x44
+#define MMU_FAULT_AD		0x48
+#define MMU_TTB			0x4c
+#define MMU_LOCK		0x50
+#define MMU_LD_TLB		0x54
+#define MMU_CAM			0x58
+#define MMU_RAM			0x5c
+#define MMU_GFLUSH		0x60
+#define MMU_FLUSH_ENTRY		0x64
+#define MMU_READ_CAM		0x68
+#define MMU_READ_RAM		0x6c
+#define MMU_EMU_FAULT_AD	0x70
+
+#define MMU_REG_SIZE		256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT	10
+#define MMU_LOCK_BASE_MASK	(0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x)	\
+	((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT	4
+#define MMU_LOCK_VICT_MASK	(0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x)	\
+	((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT	12
+#define MMU_CAM_VATAG_MASK \
+	((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P		(1 << 3)
+#define MMU_CAM_V		(1 << 2)
+#define MMU_CAM_PGSZ_MASK	3
+#define MMU_CAM_PGSZ_1M		(0 << 0)
+#define MMU_CAM_PGSZ_64K	(1 << 0)
+#define MMU_CAM_PGSZ_4K		(2 << 0)
+#define MMU_CAM_PGSZ_16M	(3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT	12
+#define MMU_RAM_PADDR_MASK \
+	((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT	9
+#define MMU_RAM_ENDIAN_MASK	(1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG	(1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE	(0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT	7
+#define MMU_RAM_ELSZ_MASK	(3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8		(0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16		(1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32		(2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE	(3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT	6
+#define MMU_RAM_MIXED_MASK	(1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED		MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+{
+	return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+{
+	__raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h
new file mode 100644
index 00000000000..bdc7ce5d7a4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iovmm.h
@@ -0,0 +1,94 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+struct iovm_struct {
+	struct iommu		*iommu;	/* iommu object which this belongs to */
+	u32			da_start; /* area definition */
+	u32			da_end;
+	u32			flags; /* IOVMF_: see below */
+	struct list_head	list; /* linked in ascending order */
+	const struct sg_table	*sgt; /* keep 'page' <-> 'da' mapping */
+	void			*va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT		16
+#define IOVMF_HW_SIZE		(1 << IOVMF_SW_SHIFT)
+#define IOVMF_HW_MASK		(IOVMF_HW_SIZE - 1)
+#define IOVMF_SW_MASK		(~IOVMF_HW_MASK)UL
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK		(~((1 << 10) - 1))
+#define IOVMF_RAM_MASK		(~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK		(3 << 0)
+#define IOVMF_PGSZ_1M		MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K		MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K		MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M		MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK	(1 << 9)
+#define IOVMF_ENDIAN_BIG	MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE	MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK		(3 << 7)
+#define IOVMF_ELSZ_8		MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16		MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32		MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE		MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK	(1 << 6)
+#define IOVMF_MIXED		MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO		(1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC		(2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK	(3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT		(1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR		(2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK	(3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED		(1 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_ANON		(2 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_MASK		(3 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
+extern u32 iommu_vmap(struct iommu *obj, u32 da,
+			const struct sg_table *sgt, u32 flags);
+extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
+extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
+			   u32 flags);
+extern void iommu_vfree(struct iommu *obj, const u32 da);
+extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+			u32 flags);
+extern void iommu_kunmap(struct iommu *obj, u32 da);
+extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
+			   u32 flags);
+extern void iommu_kfree(struct iommu *obj, u32 da);
+
+extern void *da_to_va(struct iommu *obj, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee66f36..fb7cb772399 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,94 @@
 
 #define	INT_34XX_BENCH_MPU_EMUL	3
 
+
+#define IRQ_GIC_START		32
+#define INT_44XX_LOCALTIMER_IRQ	29
+#define INT_44XX_LOCALWDT_IRQ	30
+
+#define INT_44XX_BENCH_MPU_EMUL	(3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ	(6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ	(7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ	(8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ	(11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0	(12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1	(13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2	(14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3	(15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ	(24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ	(25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU	(26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU	(28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1	(37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2	(38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3	(39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4	(40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5	(41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6	(42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7	(43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8	(44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9	(45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10	(46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11	(47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12	(95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5	(51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ	(56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ	(57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ	(58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ	(65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ	(66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0	(67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1	(68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ	(71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ	(72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ	(73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ	(74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ	(70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO	(76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO	(77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN	(78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF	(79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG	(80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX	(81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX	(82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ	(83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ	(86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX	(89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX	(90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ	(91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ	(69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ	(16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ	(17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ	(22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ	(23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ	(27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC	(92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA	(93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1	(29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2	(30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3	(31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4	(32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5	(33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6	(34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ	(35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ	(36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ	(48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ	(49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ	(76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ	(77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
+
+
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
@@ -467,6 +558,7 @@
 
 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 232923aaf61..45ea3ae3c99 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -33,7 +33,11 @@ struct omap_kp_platform_data {
 #define GROUP_3		(3 << 16)
 #define GROUP_MASK	GROUP_3
 
+#define KEY_PERSISTENT		0x00800000
+#define KEYNUM_MASK		0x00EFFFFF
 #define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+						KEY_PERSISTENT)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564d927..9ad41dc484c 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 24335d4932f..696edfc145a 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -85,23 +85,5 @@
 #define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
 #define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
 
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
 #endif /* __ASM_ARCH_OMAP24XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index ab640151d3e..f8d186a7371 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -31,13 +31,9 @@
 
 #define L4_34XX_BASE		0x48000000
 #define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
 #define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
 #define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
 #define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
 
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800
@@ -83,15 +79,6 @@
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE			OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
 #define OMAP34XX_DSP_BASE	0x58000000
 #define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
 #define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 00000000000..15dec7f1c7c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE			0x4a000000
+#define L4_WK_44XX_BASE			0x4a300000
+#define L4_PER_44XX_BASE		0x48000000
+#define L4_EMU_44XX_BASE		0x54000000
+#define L3_44XX_BASE			0x44000000
+#define OMAP4430_32KSYNCT_BASE		0x4a304000
+#define OMAP4430_CM_BASE		0x4a004000
+#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP44XX_GPMC_BASE		0x50000000
+#define OMAP443X_SCM_BASE		0x4a002000
+#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE		0x48200000
+#define OMAP44XX_IVA_INTC_BASE		0x40000000
+#define IRQ_SIR_IRQ			0x0040
+#define OMAP44XX_GIC_DIST_BASE		0x48241000
+#define OMAP44XX_GIC_CPU_BASE		0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE		0x48240000
+#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE		0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
+#define OMAP44XX_WKUPGEN_BASE		0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d302c26..72f433d7d82 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -9,8 +9,12 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#define ONENAND_SYNC_READ	(1 << 0)
+#define ONENAND_SYNC_READWRITE	(1 << 1)
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
@@ -18,8 +22,22 @@ struct omap_onenand_platform_data {
 	int			nr_parts;
 	int                     (*onenand_setup)(void __iomem *, int freq);
 	int			dma_channel;
+	u8			flags;
 };
 
-int omap2_onenand_rephase(void);
-
 #define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data	NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a04be4..13abd02d152 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
 /*
- *  arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
 #define OMAP_UART1_BASE		0xfffb0000
 #define OMAP_UART2_BASE		0xfffb0800
 #define OMAP_UART3_BASE		0xfffb9800
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP2)
 /* OMAP2 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP3)
 /* OMAP3 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x49020000
+#define OMAP_MAX_NR_PORTS	3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x48020000
+#define OMAP_UART4_BASE		0x4806e000
+#define OMAP_MAX_NR_PORTS	4
 #endif
 
-#define OMAP_MAX_NR_PORTS	3
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
@@ -40,4 +52,13 @@
 			__ret;						\
 			})
 
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+#endif
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/mach/smp.h
new file mode 100644
index 00000000000..dcaa8fde706
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/smp.h
@@ -0,0 +1,51 @@
+/*
+ * OMAP4 machine specific smp.h
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_SMP_H
+#define OMAP_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/*
+ * set_event() is used to wake up secondary core from wfe using sev. ROM
+ * code puts the second core into wfe(standby).
+ *
+ */
+#define set_event()	__asm__ __volatile__ ("sev" : : : "memory")
+
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+
+/*
+ * We use Soft IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Read MPIDR: Multiprocessor affinity register
+ */
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index ab35d622dcf..dca7c16ae90 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
 				     u32 sdrc_actim_ctrla,
-				     u32 sdrc_actim_ctrlb, u32 m2);
+				     u32 sdrc_actim_ctrlb, u32 m2,
+				     u32 unlock_dll);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
 extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
 					  u32 sdrc_actim_ctrla,
-					  u32 sdrc_actim_ctrlb, u32 m2);
+					  u32 sdrc_actim_ctrlb, u32 m2,
+					  u32 unlock_dll);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index 69f0ceed500..f337e1761e2 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,13 +27,7 @@
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
 
-#ifdef CONFIG_USB_MUSB_SOC
 extern void usb_musb_init(void);
-#else
-static inline void usb_musb_init(void)
-{
-}
-#endif
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index dc104cd9619..b97dfafeebd 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326efc1ad..9b42d72d96c 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -7,6 +18,7 @@
 #include <mach/omap16xx.h>
 #include <mach/omap24xx.h>
 #include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
 	}
 #endif
-
+#ifdef CONFIG_ARCH_OMAP4
+	if (cpu_is_omap44xx()) {
+		if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+			return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+		if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+			return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+		if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+			return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+	}
+#endif
 	return __arm_ioremap(p, size, type);
 }
 EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
new file mode 100644
index 00000000000..4cf449fa2cb
--- /dev/null
+++ b/arch/arm/plat-omap/iommu.c
@@ -0,0 +1,996 @@
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ *		Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/iommu.h>
+
+#include "iopgtable.h"
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * install_iommu_arch - Install archtecure specific iommu functions
+ * @ops:	a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int install_iommu_arch(const struct iommu_functions *ops)
+{
+	if (arch_iommu)
+		return -EBUSY;
+
+	arch_iommu = ops;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(install_iommu_arch);
+
+/**
+ * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops:	a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+	if (arch_iommu != ops)
+		pr_err("%s: not your arch\n", __func__);
+
+	arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
+
+/**
+ * iommu_save_ctx - Save registers for pm off-mode support
+ * @obj:	target iommu
+ **/
+void iommu_save_ctx(struct iommu *obj)
+{
+	arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_save_ctx);
+
+/**
+ * iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj:	target iommu
+ **/
+void iommu_restore_ctx(struct iommu *obj)
+{
+	arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_restore_ctx);
+
+/**
+ * iommu_arch_version - Return running iommu arch version
+ **/
+u32 iommu_arch_version(void)
+{
+	return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(iommu_arch_version);
+
+static int iommu_enable(struct iommu *obj)
+{
+	int err;
+
+	if (!obj)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	err = arch_iommu->enable(obj);
+
+	clk_disable(obj->clk);
+	return err;
+}
+
+static void iommu_disable(struct iommu *obj)
+{
+	if (!obj)
+		return;
+
+	clk_enable(obj->clk);
+
+	arch_iommu->disable(obj);
+
+	clk_disable(obj->clk);
+}
+
+/*
+ *	TLB operations
+ */
+void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+	BUG_ON(!cr || !e);
+
+	arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+	if (!cr)
+		return -EINVAL;
+
+	return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
+					     struct iotlb_entry *e)
+{
+	if (!e)
+		return NULL;
+
+	return arch_iommu->alloc_cr(obj, e);
+}
+
+u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+	return arch_iommu->cr_to_virt(cr);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+	return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct iommu *obj, u32 *da)
+{
+	return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
+{
+	u32 val;
+
+	val = iommu_read_reg(obj, MMU_LOCK);
+
+	l->base = MMU_LOCK_BASE(val);
+	l->vict = MMU_LOCK_VICT(val);
+
+	BUG_ON(l->base != 0); /* Currently no preservation is used */
+}
+
+static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
+{
+	u32 val;
+
+	BUG_ON(l->base != 0); /* Currently no preservation is used */
+
+	val = (l->base << MMU_LOCK_BASE_SHIFT);
+	val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+	iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+	arch_iommu->tlb_load_cr(obj, cr);
+
+	iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+	iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj:	target iommu
+ * @cr:		contents of cam and ram register
+ * @buf:	output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
+				    char *buf)
+{
+	BUG_ON(!cr || !buf);
+
+	return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj:	target iommu
+ * @e:		an iommu tlb entry info
+ **/
+int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+	int i;
+	int err = 0;
+	struct iotlb_lock l;
+	struct cr_regs *cr;
+
+	if (!obj || !obj->nr_tlb_entries || !e)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs tmp;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &tmp);
+		if (!iotlb_cr_valid(&tmp))
+			break;
+	}
+
+	if (i == obj->nr_tlb_entries) {
+		dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+
+	cr = iotlb_alloc_cr(obj, e);
+	if (IS_ERR(cr)) {
+		clk_disable(obj->clk);
+		return PTR_ERR(cr);
+	}
+
+	iotlb_load_cr(obj, cr);
+	kfree(cr);
+
+	/* increment victim for next tlb load */
+	if (++l.vict == obj->nr_tlb_entries)
+		l.vict = 0;
+	iotlb_lock_set(obj, &l);
+out:
+	clk_disable(obj->clk);
+	return err;
+}
+EXPORT_SYMBOL_GPL(load_iotlb_entry);
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_page(struct iommu *obj, u32 da)
+{
+	struct iotlb_lock l;
+	int i;
+
+	clk_enable(obj->clk);
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs cr;
+		u32 start;
+		size_t bytes;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &cr);
+		if (!iotlb_cr_valid(&cr))
+			continue;
+
+		start = iotlb_cr_to_virt(&cr);
+		bytes = iopgsz_to_bytes(cr.cam & 3);
+
+		if ((start <= da) && (da < start + bytes)) {
+			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+				__func__, start, da, bytes);
+
+			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+		}
+	}
+	clk_disable(obj->clk);
+
+	if (i == obj->nr_tlb_entries)
+		dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_page);
+
+/**
+ * flush_iotlb_range - Clear an iommu tlb entries
+ * @obj:	target iommu
+ * @start:	iommu device virtual address(start)
+ * @end:	iommu device virtual address(end)
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
+{
+	u32 da = start;
+
+	while (da < end) {
+		flush_iotlb_page(obj, da);
+		/* FIXME: Optimize for multiple page size */
+		da += IOPTE_SIZE;
+	}
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_range);
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj:	target iommu
+ **/
+void flush_iotlb_all(struct iommu *obj)
+{
+	struct iotlb_lock l;
+
+	clk_enable(obj->clk);
+
+	l.base = 0;
+	l.vict = 0;
+	iotlb_lock_set(obj, &l);
+
+	iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+	clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_all);
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+	ssize_t bytes;
+
+	if (!obj || !buf)
+		return -EINVAL;
+
+	clk_enable(obj->clk);
+
+	bytes = arch_iommu->dump_ctx(obj, buf);
+
+	clk_disable(obj->clk);
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(iommu_dump_ctx);
+
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+{
+	int i;
+	struct iotlb_lock saved, l;
+	struct cr_regs *p = crs;
+
+	clk_enable(obj->clk);
+
+	iotlb_lock_get(obj, &saved);
+	memcpy(&l, &saved, sizeof(saved));
+
+	for (i = 0; i < obj->nr_tlb_entries; i++) {
+		struct cr_regs tmp;
+
+		iotlb_lock_get(obj, &l);
+		l.vict = i;
+		iotlb_lock_set(obj, &l);
+		iotlb_read_cr(obj, &tmp);
+		if (!iotlb_cr_valid(&tmp))
+			continue;
+
+		*p++ = tmp;
+	}
+	iotlb_lock_set(obj, &saved);
+	clk_disable(obj->clk);
+
+	return  p - crs;
+}
+
+/**
+ * dump_tlb_entries - dump cr arrays to given buffer
+ * @obj:	target iommu
+ * @buf:	output buffer
+ **/
+size_t dump_tlb_entries(struct iommu *obj, char *buf)
+{
+	int i, n;
+	struct cr_regs *cr;
+	char *p = buf;
+
+	cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+	if (!cr)
+		return 0;
+
+	n = __dump_tlb_entries(obj, cr);
+	for (i = 0; i < n; i++)
+		p += iotlb_dump_cr(obj, cr + i, p);
+	kfree(cr);
+
+	return p - buf;
+}
+EXPORT_SYMBOL_GPL(dump_tlb_entries);
+
+int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+	return driver_for_each_device(&omap_iommu_driver.driver,
+				      NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ *	H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+	/* FIXME: L2 cache should be taken care of if it exists */
+	do {
+		asm("mcr	p15, 0, %0, c7, c10, 1 @ flush_pgd"
+		    : : "r" (first));
+		first += L1_CACHE_BYTES / sizeof(*first);
+	} while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+	/* FIXME: L2 cache should be taken care of if it exists */
+	do {
+		asm("mcr	p15, 0, %0, c7, c10, 1 @ flush_pte"
+		    : : "r" (first));
+		first += L1_CACHE_BYTES / sizeof(*first);
+	} while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+	/* Note: freed iopte's must be clean ready for re-use */
+	kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
+{
+	u32 *iopte;
+
+	/* a table has already existed */
+	if (*iopgd)
+		goto pte_ready;
+
+	/*
+	 * do the allocation outside the page table lock
+	 */
+	spin_unlock(&obj->page_table_lock);
+	iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+	spin_lock(&obj->page_table_lock);
+
+	if (!*iopgd) {
+		if (!iopte)
+			return ERR_PTR(-ENOMEM);
+
+		*iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+		flush_iopgd_range(iopgd, iopgd);
+
+		dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+	} else {
+		/* We raced, free the reduniovant table */
+		iopte_free(iopte);
+	}
+
+pte_ready:
+	iopte = iopte_offset(iopgd, da);
+
+	dev_vdbg(obj->dev,
+		 "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+		 __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+	return iopte;
+}
+
+static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+
+	*iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+	flush_iopgd_range(iopgd, iopgd);
+	return 0;
+}
+
+static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	int i;
+
+	for (i = 0; i < 16; i++)
+		*(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+	flush_iopgd_range(iopgd, iopgd + 15);
+	return 0;
+}
+
+static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+	if (IS_ERR(iopte))
+		return PTR_ERR(iopte);
+
+	*iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+	flush_iopte_range(iopte, iopte);
+
+	dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+		 __func__, da, pa, iopte, *iopte);
+
+	return 0;
+}
+
+static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+	u32 *iopgd = iopgd_offset(obj, da);
+	u32 *iopte = iopte_alloc(obj, iopgd, da);
+	int i;
+
+	if (IS_ERR(iopte))
+		return PTR_ERR(iopte);
+
+	for (i = 0; i < 16; i++)
+		*(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+	flush_iopte_range(iopte, iopte + 15);
+	return 0;
+}
+
+static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
+{
+	int (*fn)(struct iommu *, u32, u32, u32);
+	u32 prot;
+	int err;
+
+	if (!obj || !e)
+		return -EINVAL;
+
+	switch (e->pgsz) {
+	case MMU_CAM_PGSZ_16M:
+		fn = iopgd_alloc_super;
+		break;
+	case MMU_CAM_PGSZ_1M:
+		fn = iopgd_alloc_section;
+		break;
+	case MMU_CAM_PGSZ_64K:
+		fn = iopte_alloc_large;
+		break;
+	case MMU_CAM_PGSZ_4K:
+		fn = iopte_alloc_page;
+		break;
+	default:
+		fn = NULL;
+		BUG();
+		break;
+	}
+
+	prot = get_iopte_attr(e);
+
+	spin_lock(&obj->page_table_lock);
+	err = fn(obj, e->da, e->pa, prot);
+	spin_unlock(&obj->page_table_lock);
+
+	return err;
+}
+
+/**
+ * iopgtable_store_entry - Make an iommu pte entry
+ * @obj:	target iommu
+ * @e:		an iommu tlb entry info
+ **/
+int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+	int err;
+
+	flush_iotlb_page(obj, e->da);
+	err = iopgtable_store_entry_core(obj, e);
+#ifdef PREFETCH_IOTLB
+	if (!err)
+		load_iotlb_entry(obj, e);
+#endif
+	return err;
+}
+EXPORT_SYMBOL_GPL(iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ * @ppgd:	iommu pgd entry pointer to be returned
+ * @ppte:	iommu pte entry pointer to be returned
+ **/
+void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+	u32 *iopgd, *iopte = NULL;
+
+	iopgd = iopgd_offset(obj, da);
+	if (!*iopgd)
+		goto out;
+
+	if (*iopgd & IOPGD_TABLE)
+		iopte = iopte_offset(iopgd, da);
+out:
+	*ppgd = iopgd;
+	*ppte = iopte;
+}
+EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
+
+static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
+{
+	size_t bytes;
+	u32 *iopgd = iopgd_offset(obj, da);
+	int nent = 1;
+
+	if (!*iopgd)
+		return 0;
+
+	if (*iopgd & IOPGD_TABLE) {
+		int i;
+		u32 *iopte = iopte_offset(iopgd, da);
+
+		bytes = IOPTE_SIZE;
+		if (*iopte & IOPTE_LARGE) {
+			nent *= 16;
+			/* rewind to the 1st entry */
+			iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+		}
+		bytes *= nent;
+		memset(iopte, 0, nent * sizeof(*iopte));
+		flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+		/*
+		 * do table walk to check if this table is necessary or not
+		 */
+		iopte = iopte_offset(iopgd, 0);
+		for (i = 0; i < PTRS_PER_IOPTE; i++)
+			if (iopte[i])
+				goto out;
+
+		iopte_free(iopte);
+		nent = 1; /* for the next L1 entry */
+	} else {
+		bytes = IOPGD_SIZE;
+		if (*iopgd & IOPGD_SUPER) {
+			nent *= 16;
+			/* rewind to the 1st entry */
+			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+		}
+		bytes *= nent;
+	}
+	memset(iopgd, 0, nent * sizeof(*iopgd));
+	flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+	return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj:	target iommu
+ * @da:		iommu device virtual address
+ **/
+size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
+{
+	size_t bytes;
+
+	spin_lock(&obj->page_table_lock);
+
+	bytes = iopgtable_clear_entry_core(obj, da);
+	flush_iotlb_page(obj, da);
+
+	spin_unlock(&obj->page_table_lock);
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
+
+static void iopgtable_clear_entry_all(struct iommu *obj)
+{
+	int i;
+
+	spin_lock(&obj->page_table_lock);
+
+	for (i = 0; i < PTRS_PER_IOPGD; i++) {
+		u32 da;
+		u32 *iopgd;
+
+		da = i << IOPGD_SHIFT;
+		iopgd = iopgd_offset(obj, da);
+
+		if (!*iopgd)
+			continue;
+
+		if (*iopgd & IOPGD_TABLE)
+			iopte_free(iopte_offset(iopgd, 0));
+
+		*iopgd = 0;
+		flush_iopgd_range(iopgd, iopgd);
+	}
+
+	flush_iotlb_all(obj);
+
+	spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ *	Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+	u32 stat, da;
+	u32 *iopgd, *iopte;
+	int err = -EIO;
+	struct iommu *obj = data;
+
+	if (!obj->refcount)
+		return IRQ_NONE;
+
+	/* Dynamic loading TLB or PTE */
+	if (obj->isr)
+		err = obj->isr(obj);
+
+	if (!err)
+		return IRQ_HANDLED;
+
+	clk_enable(obj->clk);
+	stat = iommu_report_fault(obj, &da);
+	clk_disable(obj->clk);
+	if (!stat)
+		return IRQ_HANDLED;
+
+	iopgd = iopgd_offset(obj, da);
+
+	if (!(*iopgd & IOPGD_TABLE)) {
+		dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
+			da, iopgd, *iopgd);
+		return IRQ_NONE;
+	}
+
+	iopte = iopte_offset(iopgd, da);
+
+	dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+		__func__, da, iopgd, *iopgd, iopte, *iopte);
+
+	return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+	struct iommu *obj = to_iommu(dev);
+	const char *name = data;
+
+	pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+	return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * iommu_get - Get iommu handler
+ * @name:	target iommu name
+ **/
+struct iommu *iommu_get(const char *name)
+{
+	int err = -ENOMEM;
+	struct device *dev;
+	struct iommu *obj;
+
+	dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+				 device_match_by_alias);
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	obj = to_iommu(dev);
+
+	mutex_lock(&obj->iommu_lock);
+
+	if (obj->refcount++ == 0) {
+		err = iommu_enable(obj);
+		if (err)
+			goto err_enable;
+		flush_iotlb_all(obj);
+	}
+
+	if (!try_module_get(obj->owner))
+		goto err_module;
+
+	mutex_unlock(&obj->iommu_lock);
+
+	dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+	return obj;
+
+err_module:
+	if (obj->refcount == 1)
+		iommu_disable(obj);
+err_enable:
+	obj->refcount--;
+	mutex_unlock(&obj->iommu_lock);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(iommu_get);
+
+/**
+ * iommu_put - Put back iommu handler
+ * @obj:	target iommu
+ **/
+void iommu_put(struct iommu *obj)
+{
+	if (!obj && IS_ERR(obj))
+		return;
+
+	mutex_lock(&obj->iommu_lock);
+
+	if (--obj->refcount == 0)
+		iommu_disable(obj);
+
+	module_put(obj->owner);
+
+	mutex_unlock(&obj->iommu_lock);
+
+	dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+EXPORT_SYMBOL_GPL(iommu_put);
+
+/*
+ *	OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+	int err = -ENODEV;
+	void *p;
+	int irq;
+	struct iommu *obj;
+	struct resource *res;
+	struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdev->num_resources != 2)
+		return -EINVAL;
+
+	obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+	if (!obj)
+		return -ENOMEM;
+
+	obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+	if (IS_ERR(obj->clk))
+		goto err_clk;
+
+	obj->nr_tlb_entries = pdata->nr_tlb_entries;
+	obj->name = pdata->name;
+	obj->dev = &pdev->dev;
+	obj->ctx = (void *)obj + sizeof(*obj);
+
+	mutex_init(&obj->iommu_lock);
+	mutex_init(&obj->mmap_lock);
+	spin_lock_init(&obj->page_table_lock);
+	INIT_LIST_HEAD(&obj->mmap);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENODEV;
+		goto err_mem;
+	}
+	obj->regbase = ioremap(res->start, resource_size(res));
+	if (!obj->regbase) {
+		err = -ENOMEM;
+		goto err_mem;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+				 dev_name(&pdev->dev));
+	if (!res) {
+		err = -EIO;
+		goto err_mem;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		err = -ENODEV;
+		goto err_irq;
+	}
+	err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+			  dev_name(&pdev->dev), obj);
+	if (err < 0)
+		goto err_irq;
+	platform_set_drvdata(pdev, obj);
+
+	p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
+	if (!p) {
+		err = -ENOMEM;
+		goto err_pgd;
+	}
+	memset(p, 0, IOPGD_TABLE_SIZE);
+	clean_dcache_area(p, IOPGD_TABLE_SIZE);
+	obj->iopgd = p;
+
+	BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
+
+	dev_info(&pdev->dev, "%s registered\n", obj->name);
+	return 0;
+
+err_pgd:
+	free_irq(irq, obj);
+err_irq:
+	release_mem_region(res->start, resource_size(res));
+	iounmap(obj->regbase);
+err_mem:
+	clk_put(obj->clk);
+err_clk:
+	kfree(obj);
+	return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+	int irq;
+	struct resource *res;
+	struct iommu *obj = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	iopgtable_clear_entry_all(obj);
+	free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, obj);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+	iounmap(obj->regbase);
+
+	clk_put(obj->clk);
+	dev_info(&pdev->dev, "%s removed\n", obj->name);
+	kfree(obj);
+	return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+	.probe	= omap_iommu_probe,
+	.remove	= __devexit_p(omap_iommu_remove),
+	.driver	= {
+		.name	= "omap-iommu",
+	},
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+	clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int __init omap_iommu_init(void)
+{
+	struct kmem_cache *p;
+	const unsigned long flags = SLAB_HWCACHE_ALIGN;
+	size_t align = 1 << 10; /* L2 pagetable alignement */
+
+	p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+			      iopte_cachep_ctor);
+	if (!p)
+		return -ENOMEM;
+	iopte_cachep = p;
+
+	return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+	kmem_cache_destroy(iopte_cachep);
+
+	platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
new file mode 100644
index 00000000000..37dac434c7a
--- /dev/null
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -0,0 +1,72 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+#define IOPGD_SHIFT		20
+#define IOPGD_SIZE		(1 << IOPGD_SHIFT)
+#define IOPGD_MASK		(~(IOPGD_SIZE - 1))
+#define IOSECTION_MASK		IOPGD_MASK
+#define PTRS_PER_IOPGD		(1 << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE	(PTRS_PER_IOPGD * sizeof(u32))
+
+#define IOSUPER_SIZE		(IOPGD_SIZE << 4)
+#define IOSUPER_MASK		(~(IOSUPER_SIZE - 1))
+
+#define IOPTE_SHIFT		12
+#define IOPTE_SIZE		(1 << IOPTE_SHIFT)
+#define IOPTE_MASK		(~(IOPTE_SIZE - 1))
+#define IOPAGE_MASK		IOPTE_MASK
+#define PTRS_PER_IOPTE		(1 << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE	(PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOLARGE_SIZE		(IOPTE_SIZE << 4)
+#define IOLARGE_MASK		(~(IOLARGE_SIZE - 1))
+
+#define IOPGD_TABLE		(1 << 0)
+#define IOPGD_SECTION		(2 << 0)
+#define IOPGD_SUPER		(1 << 18 | 2 << 0)
+
+#define IOPTE_SMALL		(2 << 0)
+#define IOPTE_LARGE		(1 << 0)
+
+#define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
+
+#define iopte_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
+#define iopte_vaddr(iopgd)	((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+
+#define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da)	(iopte_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+				   u32 flags)
+{
+	memset(e, 0, sizeof(*e));
+
+	e->da		= da;
+	e->pa		= pa;
+	e->valid	= 1;
+	/* FIXME: add OMAP1 support */
+	e->pgsz		= flags & MMU_CAM_PGSZ_MASK;
+	e->endian	= flags & MMU_RAM_ENDIAN_MASK;
+	e->elsz		= flags & MMU_RAM_ELSZ_MASK;
+	e->mixed	= flags & MMU_RAM_MIXED_MASK;
+
+	return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev)							\
+	(struct iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
new file mode 100644
index 00000000000..2fce2c151a9
--- /dev/null
+++ b/arch/arm/plat-omap/iovmm.c
@@ -0,0 +1,896 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+/*
+ * A device driver needs to create address mappings between:
+ *
+ * - iommu/device address
+ * - physical address
+ * - mpu virtual address
+ *
+ * There are 4 possible patterns for them:
+ *
+ *    |iova/			  mapping		iommu_		page
+ *    | da	pa	va	(d)-(p)-(v)		function	type
+ *  ---------------------------------------------------------------------------
+ *  1 | c	c	c	 1 - 1 - 1	  _kmap() / _kunmap()	s
+ *  2 | c	c,a	c	 1 - 1 - 1	_kmalloc()/ _kfree()	s
+ *  3 | c	d	c	 1 - n - 1	  _vmap() / _vunmap()	s
+ *  4 | c	d,a	c	 1 - n - 1	_vmalloc()/ _vfree()	n*
+ *
+ *
+ *	'iova':	device iommu virtual address
+ *	'da':	alias of 'iova'
+ *	'pa':	physical address
+ *	'va':	mpu virtual address
+ *
+ *	'c':	contiguous memory area
+ *	'd':	dicontiguous memory area
+ *	'a':	anonymous memory allocation
+ *	'()':	optional feature
+ *
+ *	'n':	a normal page(4KB) size is used.
+ *	's':	multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
+ *
+ *	'*':	not yet, but feasible.
+ */
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+	unsigned int i, total = 0;
+	struct scatterlist *sg;
+
+	if (!sgt)
+		return 0;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+
+		bytes = sg_dma_len(sg);
+
+		if (!iopgsz_ok(bytes)) {
+			pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
+			       __func__, i, bytes);
+			return 0;
+		}
+
+		total += bytes;
+	}
+
+	return total;
+}
+#define sgtable_ok(x)	(!!sgtable_len(x))
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned int sgtable_nents(size_t bytes)
+{
+	int i;
+	unsigned int nr_entries;
+	const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+
+	if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+		pr_err("%s: wrong size %08x\n", __func__, bytes);
+		return 0;
+	}
+
+	nr_entries = 0;
+	for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
+		if (bytes >= pagesize[i]) {
+			nr_entries += (bytes / pagesize[i]);
+			bytes %= pagesize[i];
+		}
+	}
+	BUG_ON(bytes);
+
+	return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+{
+	unsigned int nr_entries;
+	int err;
+	struct sg_table *sgt;
+
+	if (!bytes)
+		return ERR_PTR(-EINVAL);
+
+	if (!IS_ALIGNED(bytes, PAGE_SIZE))
+		return ERR_PTR(-EINVAL);
+
+	/* FIXME: IOVMF_DA_FIXED should support 'superpages' */
+	if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
+		nr_entries = sgtable_nents(bytes);
+		if (!nr_entries)
+			return ERR_PTR(-EINVAL);
+	} else
+		nr_entries =  bytes / PAGE_SIZE;
+
+	sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+	if (!sgt)
+		return ERR_PTR(-ENOMEM);
+
+	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+	if (err)
+		return ERR_PTR(err);
+
+	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+	return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+	if (!sgt)
+		return;
+
+	sg_free_table(sgt);
+	kfree(sgt);
+
+	pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+	u32 va;
+	size_t total;
+	unsigned int i;
+	struct scatterlist *sg;
+	struct vm_struct *new;
+	const struct mem_type *mtype;
+
+	mtype = get_mem_type(MT_DEVICE);
+	if (!mtype)
+		return ERR_PTR(-EINVAL);
+
+	total = sgtable_len(sgt);
+	if (!total)
+		return ERR_PTR(-EINVAL);
+
+	new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+	if (!new)
+		return ERR_PTR(-ENOMEM);
+	va = (u32)new->addr;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+		u32 pa;
+		int err;
+
+		pa = sg_phys(sg);
+		bytes = sg_dma_len(sg);
+
+		BUG_ON(bytes != PAGE_SIZE);
+
+		err = ioremap_page(va,  pa, mtype);
+		if (err)
+			goto err_out;
+
+		va += bytes;
+	}
+
+	flush_cache_vmap(new->addr, total);
+	return new->addr;
+
+err_out:
+	WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+	vunmap(new->addr);
+	return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+	vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
+{
+	struct iovm_struct *tmp;
+
+	list_for_each_entry(tmp, &obj->mmap, list) {
+		if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+			size_t len;
+
+			len = tmp->da_end - tmp->da_start;
+
+			dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+				__func__, tmp->da_start, da, tmp->da_end, len,
+				tmp->flags);
+
+			return tmp;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * find_iovm_area  -  find iovma which includes @da
+ * @da:		iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
+{
+	struct iovm_struct *area;
+
+	mutex_lock(&obj->mmap_lock);
+	area = __find_iovm_area(obj, da);
+	mutex_unlock(&obj->mmap_lock);
+
+	return area;
+}
+EXPORT_SYMBOL_GPL(find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
+					   size_t bytes, u32 flags)
+{
+	struct iovm_struct *new, *tmp;
+	u32 start, prev_end, alignement;
+
+	if (!obj || !bytes)
+		return ERR_PTR(-EINVAL);
+
+	start = da;
+	alignement = PAGE_SIZE;
+
+	if (flags & IOVMF_DA_ANON) {
+		/*
+		 * Reserve the first page for NULL
+		 */
+		start = PAGE_SIZE;
+		if (flags & IOVMF_LINEAR)
+			alignement = iopgsz_max(bytes);
+		start = roundup(start, alignement);
+	}
+
+	tmp = NULL;
+	if (list_empty(&obj->mmap))
+		goto found;
+
+	prev_end = 0;
+	list_for_each_entry(tmp, &obj->mmap, list) {
+
+		if ((prev_end <= start) && (start + bytes < tmp->da_start))
+			goto found;
+
+		if (flags & IOVMF_DA_ANON)
+			start = roundup(tmp->da_end, alignement);
+
+		prev_end = tmp->da_end;
+	}
+
+	if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+		goto found;
+
+	dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+		__func__, da, bytes, flags);
+
+	return ERR_PTR(-EINVAL);
+
+found:
+	new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+	if (!new)
+		return ERR_PTR(-ENOMEM);
+
+	new->iommu = obj;
+	new->da_start = start;
+	new->da_end = start + bytes;
+	new->flags = flags;
+
+	/*
+	 * keep ascending order of iovmas
+	 */
+	if (tmp)
+		list_add_tail(&new->list, &tmp->list);
+	else
+		list_add(&new->list, &obj->mmap);
+
+	dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+		__func__, new->da_start, start, new->da_end, bytes, flags);
+
+	return new;
+}
+
+static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+	size_t bytes;
+
+	BUG_ON(!obj || !area);
+
+	bytes = area->da_end - area->da_start;
+
+	dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+		__func__, area->da_start, area->da_end, bytes, area->flags);
+
+	list_del(&area->list);
+	kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * da_to_va - convert (d) to (v)
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ * @va:		mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *da_to_va(struct iommu *obj, u32 da)
+{
+	void *va = NULL;
+	struct iovm_struct *area;
+
+	mutex_lock(&obj->mmap_lock);
+
+	area = __find_iovm_area(obj, da);
+	if (!area) {
+		dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+		goto out;
+	}
+	va = area->va;
+	mutex_unlock(&obj->mmap_lock);
+out:
+	return va;
+}
+EXPORT_SYMBOL_GPL(da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+	unsigned int i;
+	struct scatterlist *sg;
+	void *va = _va;
+	void *va_end;
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		struct page *pg;
+		const size_t bytes = PAGE_SIZE;
+
+		/*
+		 * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
+		 */
+		pg = vmalloc_to_page(va);
+		BUG_ON(!pg);
+		sg_set_page(sg, pg, bytes, 0);
+
+		va += bytes;
+	}
+
+	va_end = _va + PAGE_SIZE * i;
+	flush_cache_vmap(_va, va_end);
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+	/*
+	 * Actually this is not necessary at all, just exists for
+	 * consistency of the code readibility.
+	 */
+	BUG_ON(!sgt);
+}
+
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+{
+	unsigned int i;
+	struct scatterlist *sg;
+	void *va;
+
+	va = phys_to_virt(pa);
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes;
+
+		bytes = iopgsz_max(len);
+
+		BUG_ON(!iopgsz_ok(bytes));
+
+		sg_set_buf(sg, phys_to_virt(pa), bytes);
+		/*
+		 * 'pa' is cotinuous(linear).
+		 */
+		pa += bytes;
+		len -= bytes;
+	}
+	BUG_ON(len);
+
+	clean_dcache_area(va, len);
+}
+
+static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
+{
+	/*
+	 * Actually this is not necessary at all, just exists for
+	 * consistency of the code readibility
+	 */
+	BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
+			 const struct sg_table *sgt, u32 flags)
+{
+	int err;
+	unsigned int i, j;
+	struct scatterlist *sg;
+	u32 da = new->da_start;
+
+	if (!obj || !new || !sgt)
+		return -EINVAL;
+
+	BUG_ON(!sgtable_ok(sgt));
+
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		u32 pa;
+		int pgsz;
+		size_t bytes;
+		struct iotlb_entry e;
+
+		pa = sg_phys(sg);
+		bytes = sg_dma_len(sg);
+
+		flags &= ~IOVMF_PGSZ_MASK;
+		pgsz = bytes_to_iopgsz(bytes);
+		if (pgsz < 0)
+			goto err_out;
+		flags |= pgsz;
+
+		pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+			 i, da, pa, bytes);
+
+		iotlb_init_entry(&e, da, pa, flags);
+		err = iopgtable_store_entry(obj, &e);
+		if (err)
+			goto err_out;
+
+		da += bytes;
+	}
+	return 0;
+
+err_out:
+	da = new->da_start;
+
+	for_each_sg(sgt->sgl, sg, i, j) {
+		size_t bytes;
+
+		bytes = iopgtable_clear_entry(obj, da);
+
+		BUG_ON(!iopgsz_ok(bytes));
+
+		da += bytes;
+	}
+	return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+	u32 start;
+	size_t total = area->da_end - area->da_start;
+
+	BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+	start = area->da_start;
+	while (total > 0) {
+		size_t bytes;
+
+		bytes = iopgtable_clear_entry(obj, start);
+		if (bytes == 0)
+			bytes = PAGE_SIZE;
+		else
+			dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+				__func__, start, bytes, area->flags);
+
+		BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+		total -= bytes;
+		start += bytes;
+	}
+	BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
+				      void (*fn)(const void *), u32 flags)
+{
+	struct sg_table *sgt = NULL;
+	struct iovm_struct *area;
+
+	if (!IS_ALIGNED(da, PAGE_SIZE)) {
+		dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+		return NULL;
+	}
+
+	mutex_lock(&obj->mmap_lock);
+
+	area = __find_iovm_area(obj, da);
+	if (!area) {
+		dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+		goto out;
+	}
+
+	if ((area->flags & flags) != flags) {
+		dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+			area->flags);
+		goto out;
+	}
+	sgt = (struct sg_table *)area->sgt;
+
+	unmap_iovm_area(obj, area);
+
+	fn(area->va);
+
+	dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+		area->da_start, da, area->da_end,
+		area->da_end - area->da_start, area->flags);
+
+	free_iovm_area(obj, area);
+out:
+	mutex_unlock(&obj->mmap_lock);
+
+	return sgt;
+}
+
+static u32 map_iommu_region(struct iommu *obj, u32 da,
+	      const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+	int err = -ENOMEM;
+	struct iovm_struct *new;
+
+	mutex_lock(&obj->mmap_lock);
+
+	new = alloc_iovm_area(obj, da, bytes, flags);
+	if (IS_ERR(new)) {
+		err = PTR_ERR(new);
+		goto err_alloc_iovma;
+	}
+	new->va = va;
+	new->sgt = sgt;
+
+	if (map_iovm_area(obj, new, sgt, new->flags))
+		goto err_map;
+
+	mutex_unlock(&obj->mmap_lock);
+
+	dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+		__func__, new->da_start, bytes, new->flags, va);
+
+	return new->da_start;
+
+err_map:
+	free_iovm_area(obj, new);
+err_alloc_iovma:
+	mutex_unlock(&obj->mmap_lock);
+	return err;
+}
+
+static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
+		 const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+	return map_iommu_region(obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * iommu_vmap  -  (d)-(p)-(v) address mapper
+ * @obj:	objective iommu
+ * @sgt:	address of scatter gather table
+ * @flags:	iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
+		 u32 flags)
+{
+	size_t bytes;
+	void *va;
+
+	if (!obj || !obj->dev || !sgt)
+		return -EINVAL;
+
+	bytes = sgtable_len(sgt);
+	if (!bytes)
+		return -EINVAL;
+	bytes = PAGE_ALIGN(bytes);
+
+	va = vmap_sg(sgt);
+	if (IS_ERR(va))
+		return PTR_ERR(va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_MMIO;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		vunmap_sg(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmap);
+
+/**
+ * iommu_vunmap  -  release virtual mapping obtained by 'iommu_vmap()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'iommu_vmap()'.
+ */
+struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+	/*
+	 * 'sgt' is allocated before 'iommu_vmalloc()' is called.
+	 * Just returns 'sgt' to the caller to free
+	 */
+	sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	return sgt;
+}
+EXPORT_SYMBOL_GPL(iommu_vunmap);
+
+/**
+ * iommu_vmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @bytes:	allocation size
+ * @flags:	iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+	void *va;
+	struct sg_table *sgt;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = vmalloc(bytes);
+	if (!va)
+		return -ENOMEM;
+
+	sgt = sgtable_alloc(bytes, flags);
+	if (IS_ERR(sgt)) {
+		da = PTR_ERR(sgt);
+		goto err_sgt_alloc;
+	}
+	sgtable_fill_vmalloc(sgt, va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		goto err_iommu_vmap;
+
+	return da;
+
+err_iommu_vmap:
+	sgtable_drain_vmalloc(sgt);
+	sgtable_free(sgt);
+err_sgt_alloc:
+	vfree(va);
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmalloc);
+
+/**
+ * iommu_vfree  -  release memory allocated by 'iommu_vmalloc()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'iommu_vmalloc()'.
+ */
+void iommu_vfree(struct iommu *obj, const u32 da)
+{
+	struct sg_table *sgt;
+
+	sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_vfree);
+
+static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
+			  size_t bytes, u32 flags)
+{
+	struct sg_table *sgt;
+
+	sgt = sgtable_alloc(bytes, flags);
+	if (IS_ERR(sgt))
+		return PTR_ERR(sgt);
+
+	sgtable_fill_kmalloc(sgt, pa, bytes);
+
+	da = map_iommu_region(obj, da, sgt, va, bytes, flags);
+	if (IS_ERR_VALUE(da)) {
+		sgtable_drain_kmalloc(sgt);
+		sgtable_free(sgt);
+	}
+
+	return da;
+}
+
+/**
+ * iommu_kmap  -  (d)-(p)-(v) address mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @pa:		contiguous physical memory
+ * @flags:	iovma and page property
+ *
+ * Creates 1-1-1 mapping and returns @da again, which can be
+ * adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+		 u32 flags)
+{
+	void *va;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = ioremap(pa, bytes);
+	if (!va)
+		return -ENOMEM;
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_LINEAR;
+	flags |= IOVMF_MMIO;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		iounmap(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmap);
+
+/**
+ * iommu_kunmap  -  release virtual mapping obtained by 'iommu_kmap()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmap()'.
+ */
+void iommu_kunmap(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+	typedef void (*func_t)(const void *);
+
+	sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+			    IOVMF_LINEAR | IOVMF_MMIO);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kunmap);
+
+/**
+ * iommu_kmalloc  -  (d)-(p)-(v) address allocator and mapper
+ * @obj:	objective iommu
+ * @da:		contiguous iommu virtual memory
+ * @bytes:	bytes for allocation
+ * @flags:	iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-1-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+	void *va;
+	u32 pa;
+
+	if (!obj || !obj->dev || !bytes)
+		return -EINVAL;
+
+	bytes = PAGE_ALIGN(bytes);
+
+	va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
+	if (!va)
+		return -ENOMEM;
+	pa = virt_to_phys(va);
+
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_LINEAR;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+	if (IS_ERR_VALUE(da))
+		kfree(va);
+
+	return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmalloc);
+
+/**
+ * iommu_kfree  -  release virtual mapping obtained by 'iommu_kmalloc()'
+ * @obj:	objective iommu
+ * @da:		iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmalloc()'.
+ */
+void iommu_kfree(struct iommu *obj, u32 da)
+{
+	struct sg_table *sgt;
+
+	sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
+	if (!sgt)
+		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+	sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kfree);
+
+
+static int __init iovmm_init(void)
+{
+	const unsigned long flags = SLAB_HWCACHE_ALIGN;
+	struct kmem_cache *p;
+
+	p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+			      flags, NULL);
+	if (!p)
+		return -ENOMEM;
+	iovm_area_cachep = p;
+
+	return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+	kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 28b0a824b8c..efa0e0111f3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id)
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_tx = dev_id;
+	u16 irqst_spcr2;
 
-	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+	irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
 
-	complete(&mcbsp_tx->tx_irq_completion);
+	if (irqst_spcr2 & XSYNC_ERR) {
+		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+			irqst_spcr2);
+		/* Writing zero to XSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+			irqst_spcr2 & ~(XSYNC_ERR));
+	} else {
+		complete(&mcbsp_tx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_rx = dev_id;
+	u16 irqst_spcr1;
 
-	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+	irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
 
-	complete(&mcbsp_rx->rx_irq_completion);
+	if (irqst_spcr1 & RSYNC_ERR) {
+		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+			irqst_spcr1);
+		/* Writing zero to RSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+			irqst_spcr1 & ~(RSYNC_ERR));
+	} else {
+		complete(&mcbsp_rx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040fd5ca..8d329fb2074 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
+	if (cpu_is_omap44xx())
+		return 0;
+
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");
 		return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index fa5297d643d..a5b9bcd6b10 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -38,12 +41,14 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PUB_VA	(VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xd7000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
+#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -87,6 +92,10 @@ static int is_sram_locked(void)
 {
 	int type = 0;
 
+	if (cpu_is_omap44xx())
+		/* Not yet supported */
+		return 0;
+
 	if (cpu_is_omap242x())
 		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
 
@@ -135,6 +144,10 @@ void __init omap_detect_sram(void)
 				omap_sram_base = OMAP3_SRAM_VA;
 				omap_sram_start = OMAP3_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
+			} else if (cpu_is_omap44xx()) {
+				omap_sram_base = OMAP4_SRAM_VA;
+				omap_sram_start = OMAP4_SRAM_PA;
+				omap_sram_size = 0x8000; /* 32K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
@@ -201,8 +214,23 @@ void __init omap_map_sram(void)
 		base = OMAP3_SRAM_PA;
 		base = ROUND_DOWN(base, PAGE_SIZE);
 		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+
+		/*
+		 * SRAM must be marked as non-cached on OMAP3 since the
+		 * CORE DPLL M2 divider change code (in SRAM) runs with the
+		 * SDRAM controller disabled, and if it is marked cached,
+		 * the ARM may attempt to write cache lines back to SDRAM
+		 * which will cause the system to hang.
+		 */
+		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
 	}
 
+	if (cpu_is_omap44xx()) {
+		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+		base = OMAP4_SRAM_PA;
+		base = ROUND_DOWN(base, PAGE_SIZE);
+		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	}
 	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
@@ -242,20 +270,13 @@ void * omap_sram_push(void * start, unsigned long size)
 	return (void *)omap_sram_ceil;
 }
 
-static void omap_sram_error(void)
-{
-	panic("Uninitialized SRAM function\n");
-}
-
 #ifdef CONFIG_ARCH_OMAP1
 
 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
 
 void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 {
-	if (!_omap_sram_reprogram_clock)
-		omap_sram_error();
-
+	BUG_ON(!_omap_sram_reprogram_clock);
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
@@ -280,9 +301,7 @@ static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 		   u32 base_cs, u32 force_unlock)
 {
-	if (!_omap2_sram_ddr_init)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_sram_ddr_init);
 	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
 			     base_cs, force_unlock);
 }
@@ -292,9 +311,7 @@ static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
 
 void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
 {
-	if (!_omap2_sram_reprogram_sdrc)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_sram_reprogram_sdrc);
 	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
 }
 
@@ -302,9 +319,7 @@ static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 {
-	if (!_omap2_set_prcm)
-		omap_sram_error();
-
+	BUG_ON(!_omap2_set_prcm);
 	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
 }
 #endif
@@ -356,16 +371,15 @@ static inline int omap243x_sram_init(void)
 static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
 					      u32 sdrc_actim_ctrla,
 					      u32 sdrc_actim_ctrlb,
-					      u32 m2);
+					      u32 m2, u32 unlock_dll);
 u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2)
+			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
 {
-	if (!_omap3_sram_configure_core_dpll)
-		omap_sram_error();
-
+	BUG_ON(!_omap3_sram_configure_core_dpll);
 	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
 					       sdrc_actim_ctrla,
-					       sdrc_actim_ctrlb, m2);
+					       sdrc_actim_ctrlb, m2,
+					       unlock_dll);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -406,6 +420,8 @@ int __init omap_sram_init(void)
 		omap243x_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
+	else if (cpu_is_omap44xx())
+		omap34xx_sram_init(); /* FIXME: */
 
 	return 0;
 }
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 32eb9e33beb..e814803d474 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -15,10 +15,9 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 
 static DEFINE_SPINLOCK(gpio_lock);
-static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
 static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
 static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
 
@@ -46,82 +45,54 @@ static void __set_level(unsigned pin, int high)
 	writel(u, GPIO_OUT(pin));
 }
 
-
-/*
- * GENERIC_GPIO primitives.
- */
-int gpio_direction_input(unsigned pin)
+static inline void __set_blinking(unsigned pin, int blink)
 {
-	unsigned long flags;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/*
-	 * Some callers might not have used gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (gpio_label[pin] == NULL)
-		gpio_label[pin] = "?";
+	u32 u;
 
-	/*
-	 * Configure GPIO direction.
-	 */
-	__set_direction(pin, 1);
+	u = readl(GPIO_BLINK_EN(pin));
+	if (blink)
+		u |= 1 << (pin & 31);
+	else
+		u &= ~(1 << (pin & 31));
+	writel(u, GPIO_BLINK_EN(pin));
+}
 
-	spin_unlock_irqrestore(&gpio_lock, flags);
+static inline int orion_gpio_is_valid(unsigned pin, int mode)
+{
+	if (pin < GPIO_MAX) {
+		if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
+			goto err_out;
+		if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
+			goto err_out;
+		return true;
+	}
 
-	return 0;
+err_out:
+	pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+	return false;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned pin, int value)
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
 	unsigned long flags;
-	u32 u;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+	if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
 		return -EINVAL;
-	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Some callers might not have used gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (gpio_label[pin] == NULL)
-		gpio_label[pin] = "?";
-
-	/*
-	 * Disable blinking.
-	 */
-	u = readl(GPIO_BLINK_EN(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
-
-	/*
-	 * Configure GPIO output value.
-	 */
-	__set_level(pin, value);
-
-	/*
-	 * Configure GPIO direction.
-	 */
-	__set_direction(pin, 0);
+	/* Configure GPIO direction. */
+	__set_direction(pin, 1);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
-int gpio_get_value(unsigned pin)
+static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
 {
 	int val;
 
@@ -132,83 +103,75 @@ int gpio_get_value(unsigned pin)
 
 	return (val >> (pin & 31)) & 1;
 }
-EXPORT_SYMBOL(gpio_get_value);
 
-void gpio_set_value(unsigned pin, int value)
+static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
+	int value)
 {
 	unsigned long flags;
-	u32 u;
+
+	if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+		return -EINVAL;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Disable blinking.
-	 */
-	u = readl(GPIO_BLINK_EN(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+	/* Disable blinking. */
+	__set_blinking(pin, 0);
 
-	/*
-	 * Configure GPIO output value.
-	 */
+	/* Configure GPIO output value. */
 	__set_level(pin, value);
 
+	/* Configure GPIO direction. */
+	__set_direction(pin, 0);
+
 	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
 }
-EXPORT_SYMBOL(gpio_set_value);
 
-int gpio_request(unsigned pin, const char *label)
+static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
 {
 	unsigned long flags;
-	int ret;
-
-	if (pin >= GPIO_MAX ||
-	    !(test_bit(pin, gpio_valid_input) ||
-	      test_bit(pin, gpio_valid_output))) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
-	if (gpio_label[pin] == NULL) {
-		gpio_label[pin] = label ? label : "?";
-		ret = 0;
-	} else {
-		pr_debug("%s: GPIO %d already used as %s\n",
-			 __func__, pin, gpio_label[pin]);
-		ret = -EBUSY;
-	}
-	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	return ret;
+	/* Configure GPIO output value. */
+	__set_level(pin, value);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
 }
-EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned pin)
+static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 {
-	if (pin >= GPIO_MAX ||
-	    !(test_bit(pin, gpio_valid_input) ||
-	      test_bit(pin, gpio_valid_output))) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return;
-	}
-
-	if (gpio_label[pin] == NULL)
-		pr_warning("%s: GPIO %d already freed\n", __func__, pin);
-	else
-		gpio_label[pin] = NULL;
+	if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
+	    orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+		return 0;
+	return -EINVAL;
 }
-EXPORT_SYMBOL(gpio_free);
 
+static struct gpio_chip orion_gpiochip = {
+	.label			= "orion_gpio",
+	.direction_input	= orion_gpio_direction_input,
+	.get			= orion_gpio_get_value,
+	.direction_output	= orion_gpio_direction_output,
+	.set			= orion_gpio_set_value,
+	.request		= orion_gpio_request,
+	.base			= 0,
+	.ngpio			= GPIO_MAX,
+	.can_sleep		= 0,
+};
+
+void __init orion_gpio_init(void)
+{
+	gpiochip_add(&orion_gpiochip);
+}
 
 /*
  * Orion-specific GPIO API extensions.
  */
 void __init orion_gpio_set_unused(unsigned pin)
 {
-	/*
-	 * Configure as output, drive low.
-	 */
+	/* Configure as output, drive low. */
 	__set_level(pin, 0);
 	__set_direction(pin, 0);
 }
@@ -230,21 +193,14 @@ void __init orion_gpio_set_valid(unsigned pin, int mode)
 void orion_gpio_set_blink(unsigned pin, int blink)
 {
 	unsigned long flags;
-	u32 u;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	/*
-	 * Set output value to zero.
-	 */
+	/* Set output value to zero. */
 	__set_level(pin, 0);
 
-	u = readl(GPIO_BLINK_EN(pin));
-	if (blink)
-		u |= 1 << (pin & 31);
-	else
-		u &= ~(1 << (pin & 31));
-	writel(u, GPIO_BLINK_EN(pin));
+	/* Set blinking. */
+	__set_blinking(pin, blink);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
@@ -368,7 +324,7 @@ static int gpio_irq_set_type(u32 irq, u32 type)
 }
 
 struct irq_chip orion_gpio_irq_chip = {
-	.name		= "orion_gpio",
+	.name		= "orion_gpio_irq",
 	.ack		= gpio_irq_ack,
 	.mask		= gpio_irq_mask,
 	.unmask		= gpio_irq_unmask,
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 33f6c6aec18..9646a94ed3d 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -14,12 +14,9 @@
 /*
  * GENERIC_GPIO primitives.
  */
-int gpio_request(unsigned pin, const char *label);
-void gpio_free(unsigned pin);
-int gpio_direction_input(unsigned pin);
-int gpio_direction_output(unsigned pin, int value);
-int gpio_get_value(unsigned pin);
-void gpio_set_value(unsigned pin, int value);
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
 
 /*
  * Orion-specific GPIO API extensions.
@@ -27,11 +24,13 @@ void gpio_set_value(unsigned pin, int value);
 void orion_gpio_set_unused(unsigned pin);
 void orion_gpio_set_blink(unsigned pin, int blink);
 
-#define GPIO_BIDI_OK		(1 << 0)
-#define GPIO_INPUT_OK		(1 << 1)
-#define GPIO_OUTPUT_OK		(1 << 2)
+#define GPIO_INPUT_OK		(1 << 0)
+#define GPIO_OUTPUT_OK		(1 << 1)
 void orion_gpio_set_valid(unsigned pin, int mode);
 
+/* Initialize gpiolib. */
+void __init orion_gpio_init(void);
+
 /*
  * GPIO interrupt handling.
  */
diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h
index 3c9cf6a305e..665c362a2fb 100644
--- a/arch/arm/plat-orion/include/plat/orion5x_wdt.h
+++ b/arch/arm/plat-orion/include/plat/orion_wdt.h
@@ -1,15 +1,15 @@
 /*
- * arch/arm/plat-orion/include/plat/orion5x_wdt.h
+ * arch/arm/plat-orion/include/plat/orion_wdt.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __PLAT_ORION5X_WDT_H
-#define __PLAT_ORION5X_WDT_H
+#ifndef __PLAT_ORION_WDT_H
+#define __PLAT_ORION_WDT_H
 
-struct orion5x_wdt_platform_data {
+struct orion_wdt_platform_data {
 	u32	tclk;		/* no <linux/clk.h> support yet */
 };
 
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index de8a001fc3a..715a30177f2 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -12,11 +12,15 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
 #include <mach/bridge-regs.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
@@ -39,6 +43,56 @@ static u32 ticks_per_jiffy;
 
 
 /*
+ * Orion's sched_clock implementation. It has a resolution of
+ * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
+ *
+ * Because the hardware timer period is quite short (21 secs if
+ * 200MHz TCLK) and because cnt32_to_63() needs to be called at
+ * least once per half period to work properly, a kernel timer is
+ * set up to ensure this requirement is always met.
+ */
+#define TCLK2NS_SCALE_FACTOR 8
+
+static unsigned long tclk2ns_scale;
+
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
+	return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
+}
+
+static struct timer_list cnt32_to_63_keepwarm_timer;
+
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+	(void) sched_clock();
+}
+
+static void __init setup_sched_clock(unsigned long tclk)
+{
+	unsigned long long v;
+	unsigned long data;
+
+	v = NSEC_PER_SEC;
+	v <<= TCLK2NS_SCALE_FACTOR;
+	v += tclk/2;
+	do_div(v, tclk);
+	/*
+	 * We want an even value to automatically clear the top bit
+	 * returned by cnt32_to_63() without an additional run time
+	 * instruction. So if the LSB is 1 then round it up.
+	 */
+	if (v & 1)
+		v++;
+	tclk2ns_scale = v;
+
+	data = (0xffffffffUL / tclk / 2 - 2) * HZ;
+	setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+}
+
+/*
  * Clocksource handling.
  */
 static cycle_t orion_clksrc_read(struct clocksource *cs)
@@ -176,6 +230,10 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;
 
+	/*
+	 * Set scale and timer for sched_clock
+	 */
+	setup_sched_clock(tclk);
 
 	/*
 	 * Setup free-running clocksource timer (interrupts
@@ -190,7 +248,6 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 	orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
 	clocksource_register(&orion_clksrc);
 
-
 	/*
 	 * Setup clockevent timer (interrupt-driven.)
 	 */
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 8f2c4c7fbd4..0264bfb0ca4 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -7,3 +7,5 @@ obj-y	:= dma.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/plat-pxa/include/plat/i2c.h
index 1a9f65e6ec0..1a9f65e6ec0 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/plat-pxa/include/plat/i2c.h
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index fcdd374437a..a9eabdcfa16 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -21,6 +21,19 @@
 
 #include <asm/div64.h>
 
+#define HAS_SECONDARY_PWM	0x10
+#define PWM_ID_BASE(d)		((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+	/*   PWM    has_secondary_pwm? */
+	{ "pxa25x-pwm", 0 },
+	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+	{ "pxa168-pwm", 1 },
+	{ "pxa910-pwm", 1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
 #define PWMDCR		(0x04)
@@ -31,7 +44,8 @@
 
 struct pwm_device {
 	struct list_head	node;
-	struct platform_device *pdev;
+	struct pwm_device	*secondary;
+	struct platform_device	*pdev;
 
 	const char	*label;
 	struct clk	*clk;
@@ -159,17 +173,17 @@ static inline void __add_pwm(struct pwm_device *pwm)
 	mutex_unlock(&pwm_lock);
 }
 
-static struct pwm_device *pwm_probe(struct platform_device *pdev,
-		unsigned int pwm_id, struct pwm_device *parent_pwm)
+static int __devinit pwm_probe(struct platform_device *pdev)
 {
-	struct pwm_device *pwm;
+	struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pwm_device *pwm, *secondary = NULL;
 	struct resource *r;
 	int ret = 0;
 
 	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
 	if (pwm == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 	}
 
 	pwm->clk = clk_get(&pdev->dev, NULL);
@@ -180,16 +194,9 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 	pwm->clk_enabled = 0;
 
 	pwm->use_count = 0;
-	pwm->pwm_id = pwm_id;
+	pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
 	pwm->pdev = pdev;
 
-	if (parent_pwm != NULL) {
-		/* registers for the second PWM has offset of 0x10 */
-		pwm->mmio_base = parent_pwm->mmio_base + 0x10;
-		__add_pwm(pwm);
-		return pwm;
-	}
-
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -211,9 +218,27 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 		goto err_free_mem;
 	}
 
+	if (id->driver_data & HAS_SECONDARY_PWM) {
+		secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+		if (secondary == NULL) {
+			ret = -ENOMEM;
+			goto err_free_mem;
+		}
+
+		*secondary = *pwm;
+		pwm->secondary = secondary;
+
+		/* registers for the second PWM has offset of 0x10 */
+		secondary->mmio_base = pwm->mmio_base + 0x10;
+		secondary->pwm_id = pdev->id + 2;
+	}
+
 	__add_pwm(pwm);
+	if (secondary)
+		__add_pwm(secondary);
+
 	platform_set_drvdata(pdev, pwm);
-	return pwm;
+	return 0;
 
 err_free_mem:
 	release_mem_region(r->start, r->end - r->start + 1);
@@ -221,32 +246,7 @@ err_free_clk:
 	clk_put(pwm->clk);
 err_free:
 	kfree(pwm);
-	return ERR_PTR(ret);
-}
-
-static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
-
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
-}
-
-static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-
-	pwm = pwm_probe(pdev, pdev->id, NULL);
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	pwm = pwm_probe(pdev, pdev->id + 2, pwm);
-	if (IS_ERR(pwm))
-		return PTR_ERR(pwm);
-
-	return 0;
+	return ret;
 }
 
 static int __devexit pwm_remove(struct platform_device *pdev)
@@ -259,6 +259,12 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 		return -ENODEV;
 
 	mutex_lock(&pwm_lock);
+
+	if (pwm->secondary) {
+		list_del(&pwm->secondary->node);
+		kfree(pwm->secondary);
+	}
+
 	list_del(&pwm->node);
 	mutex_unlock(&pwm_lock);
 
@@ -272,46 +278,25 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver pxa25x_pwm_driver = {
+static struct platform_driver pwm_driver = {
 	.driver		= {
 		.name	= "pxa25x-pwm",
+		.owner	= THIS_MODULE,
 	},
-	.probe		= pxa25x_pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-};
-
-static struct platform_driver pxa27x_pwm_driver = {
-	.driver		= {
-		.name	= "pxa27x-pwm",
-	},
-	.probe		= pxa27x_pwm_probe,
+	.probe		= pwm_probe,
 	.remove		= __devexit_p(pwm_remove),
+	.id_table	= pwm_id_table,
 };
 
 static int __init pwm_init(void)
 {
-	int ret = 0;
-
-	ret = platform_driver_register(&pxa25x_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa27x_pwm_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
-		return ret;
-	}
-
-	return ret;
+	return platform_driver_register(&pwm_driver);
 }
 arch_initcall(pwm_init);
 
 static void __exit pwm_exit(void)
 {
-	platform_driver_unregister(&pxa25x_pwm_driver);
-	platform_driver_unregister(&pxa27x_pwm_driver);
+	platform_driver_unregister(&pwm_driver);
 }
 module_exit(pwm_exit);
 
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index de9383814e5..935c7558469 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
 config S3C2410_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
 	depends on PM && CRC32
@@ -150,6 +159,13 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
 # device definitions to compile in
 
 config S3C_DEV_HSMMC
@@ -172,4 +188,14 @@ config S3C_DEV_FB
 	help
 	  Compile in platform device definition for framebuffer
 
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 8d7815d25a5..610651455a7 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -18,9 +18,14 @@ obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
 obj-y				+= gpio-config.o
 
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o
+
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
 # devices
@@ -30,3 +35,5 @@ obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c
new file mode 100644
index 00000000000..e2f604b51c8
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb-hsotg.c
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = {
+		.start	= S3C_PA_USB_HSOTG,
+		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_OTG,
+		.end	= IRQ_OTG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+};
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
new file mode 100644
index 00000000000..2ee85abed6d
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb.c
@@ -0,0 +1,50 @@
+/* linux/arch/arm/plat-s3c/dev-usb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB host
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c_usb_resource[] = {
+	[0] = {
+		.start = S3C_PA_USBHOST,
+		.end   = S3C_PA_USBHOST + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_usb = {
+	.name		  = "s3c2410-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
+	.resource	  = s3c_usb_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_usb_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_usb);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
new file mode 100644
index 00000000000..c9db75c06af
--- /dev/null
+++ b/arch/arm/plat-s3c/dma.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s3c/dma.c
+ *
+ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	chan->flags = flags;
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index d71dd6d9ce5..260fdc6ad68 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
 
 #ifdef CONFIG_S3C_GPIO_TRACK
 struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
@@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
 	if (!gc->get)
 		gc->get = s3c_gpiolib_get;
 
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
 	/* gpiochip_add() prints own failure message on error. */
 	ret = gpiochip_add(gc);
 	if (ret >= 0)
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index 43df2a404b0..d847bd476b6 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,12 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
-extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					       void (*select)(unsigned selected),
-					       void (*conv)(unsigned d0, unsigned d1),
-					       unsigned int is_ts);
+extern struct s3c_adc_client *
+	s3c_adc_register(struct platform_device *pdev,
+			 void (*select)(unsigned selected),
+			 void (*conv)(unsigned d0, unsigned d1,
+				      unsigned *samples_left),
+			 unsigned int is_ts);
 
 extern void s3c_adc_release(struct s3c_adc_client *client);
 
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index a10622eed43..d86af84b5b8 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -50,6 +50,7 @@ extern struct clk clk_xtal;
 extern struct clk clk_ext;
 
 /* S3C64XX specific clocks */
+extern struct clk clk_h2;
 extern struct clk clk_27m;
 extern struct clk clk_48m;
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index e62ae0fcfe5..be541cbba07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -69,3 +69,6 @@ extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
+extern struct sysdev_class s3c6410_sysclass;
+extern struct sysdev_class s3c64xx_sysclass;
+
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 26f0cec3ac0..a0b6768fddc 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1;
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-s3c/include/plat/dma-core.h
new file mode 100644
index 00000000000..32ff2a92cb3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma-core.h
@@ -0,0 +1,22 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung S3C DMA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
+
+extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
new file mode 100644
index 00000000000..34dba98f08e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(unsigned int channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(unsigned int channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(unsigned int channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+
+
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
index 2fc60a580ac..32af612767a 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -20,6 +20,18 @@
  * specific code.
 */
 
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct s3c_gpio_pm {
+	void (*save)(struct s3c_gpio_chip *chip);
+	void (*resume)(struct s3c_gpio_chip *chip);
+};
+
 struct s3c_gpio_cfg;
 
 /**
@@ -27,6 +39,7 @@ struct s3c_gpio_cfg;
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @config: special function and pull-resistor control information.
+ * @pm_save: Save information for suspend/resume support.
  *
  * This wrapper provides the necessary information for the Samsung
  * specific gpios being registered with gpiolib.
@@ -34,7 +47,11 @@ struct s3c_gpio_cfg;
 struct s3c_gpio_chip {
 	struct gpio_chip	chip;
 	struct s3c_gpio_cfg	*config;
+	struct s3c_gpio_pm	*pm;
 	void __iomem		*base;
+#ifdef CONFIG_PM
+	u32			pm_save[4];
+#endif
 };
 
 static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
@@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
 
 static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
 #endif
+
+#ifdef CONFIG_PM
+extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define s3c_gpio_pm_1bit NULL
+#define s3c_gpio_pm_2bit NULL
+#define s3c_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 3779775133a..7a797192fcf 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -44,6 +44,8 @@ extern void (*pm_cpu_sleep)(void);
 
 extern unsigned long s3c_pm_flags;
 
+extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
+
 /* from sleep.S */
 
 extern int  s3c_cpu_save(unsigned long *saveblk);
@@ -88,6 +90,7 @@ struct pm_uart_save {
 	u32	ufcon;
 	u32	umcon;
 	u32	ubrdiv;
+	u32	udivslot;
 };
 
 /* helper functions to save/restore lists of registers. */
@@ -124,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...);
 #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
 #endif
 
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
 /* suspend memory checking */
 
 #ifdef CONFIG_S3C2410_PM_CHECK
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 487d7d2a7e1..66af75a5cdd 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -189,6 +189,11 @@
 
 #define S3C2443_DIVSLOT		  (0x2C)
 
+/* S3C64XX interrupt registers. */
+#define S3C64XX_UINTP		0x30
+#define S3C64XX_UINTSP		0x34
+#define S3C64XX_UINTM		0x38
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
new file mode 100644
index 00000000000..36a85f5000c
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
@@ -0,0 +1,50 @@
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device PHY registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, this is a seperate header file as some of the clock framework
+ * needs to touch this if the clk_48m is used as the USB OHCI or other
+ * peripheral source.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
+
+/* S3C64XX_PA_USB_HSPHY */
+
+#define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
+
+#define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
+#define SRC_PHYPWR_OTG_DISABLE			(1 << 4)
+#define SRC_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
+#define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
+
+#define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
+#define S3C_PHYCLK_MODE_USB11			(1 << 6)
+#define S3C_PHYCLK_EXT_OSC			(1 << 5)
+#define S3C_PHYCLK_CLK_FORCE			(1 << 4)
+#define S3C_PHYCLK_ID_PULL			(1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
+#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
+
+#define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
+#define S3C_RSTCON_PHYCLK			(1 << 2)
+#define S3C_RSTCON_HCLK				(1 << 2)
+#define S3C_RSTCON_PHY				(1 << 0)
+
+#define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
new file mode 100644
index 00000000000..8d18d9d4d14
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
@@ -0,0 +1,377 @@
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device block registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__
+
+#define S3C_HSOTG_REG(x) (x)
+
+#define S3C_GOTGCTL				S3C_HSOTG_REG(0x000)
+#define S3C_GOTGCTL_BSESVLD			(1 << 19)
+#define S3C_GOTGCTL_ASESVLD			(1 << 18)
+#define S3C_GOTGCTL_DBNC_SHORT			(1 << 17)
+#define S3C_GOTGCTL_CONID_B			(1 << 16)
+#define S3C_GOTGCTL_DEVHNPEN			(1 << 11)
+#define S3C_GOTGCTL_HSSETHNPEN			(1 << 10)
+#define S3C_GOTGCTL_HNPREQ			(1 << 9)
+#define S3C_GOTGCTL_HSTNEGSCS			(1 << 8)
+#define S3C_GOTGCTL_SESREQ			(1 << 1)
+#define S3C_GOTGCTL_SESREQSCS			(1 << 0)
+
+#define S3C_GOTGINT				S3C_HSOTG_REG(0x004)
+#define S3C_GOTGINT_DbnceDone			(1 << 19)
+#define S3C_GOTGINT_ADevTOUTChg			(1 << 18)
+#define S3C_GOTGINT_HstNegDet			(1 << 17)
+#define S3C_GOTGINT_HstnegSucStsChng		(1 << 9)
+#define S3C_GOTGINT_SesReqSucStsChng		(1 << 8)
+#define S3C_GOTGINT_SesEndDet			(1 << 2)
+
+#define S3C_GAHBCFG				S3C_HSOTG_REG(0x008)
+#define S3C_GAHBCFG_PTxFEmpLvl			(1 << 8)
+#define S3C_GAHBCFG_NPTxFEmpLvl			(1 << 7)
+#define S3C_GAHBCFG_DMAEn			(1 << 5)
+#define S3C_GAHBCFG_HBstLen_MASK		(0xf << 1)
+#define S3C_GAHBCFG_HBstLen_SHIFT		(1)
+#define S3C_GAHBCFG_HBstLen_Single		(0x0 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr		(0x1 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr4		(0x3 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr8		(0x5 << 1)
+#define S3C_GAHBCFG_HBstLen_Incr16		(0x7 << 1)
+#define S3C_GAHBCFG_GlblIntrEn			(1 << 0)
+
+#define S3C_GUSBCFG				S3C_HSOTG_REG(0x00C)
+#define S3C_GUSBCFG_PHYLPClkSel			(1 << 15)
+#define S3C_GUSBCFG_HNPCap			(1 << 9)
+#define S3C_GUSBCFG_SRPCap			(1 << 8)
+#define S3C_GUSBCFG_PHYIf16			(1 << 3)
+#define S3C_GUSBCFG_TOutCal_MASK		(0x7 << 0)
+#define S3C_GUSBCFG_TOutCal_SHIFT		(0)
+#define S3C_GUSBCFG_TOutCal_LIMIT		(0x7)
+#define S3C_GUSBCFG_TOutCal(_x)			((_x) << 0)
+
+#define S3C_GRSTCTL				S3C_HSOTG_REG(0x010)
+
+#define S3C_GRSTCTL_AHBIdle			(1 << 31)
+#define S3C_GRSTCTL_DMAReq			(1 << 30)
+#define S3C_GRSTCTL_TxFNum_MASK			(0x1f << 6)
+#define S3C_GRSTCTL_TxFNum_SHIFT		(6)
+#define S3C_GRSTCTL_TxFNum_LIMIT		(0x1f)
+#define S3C_GRSTCTL_TxFNum(_x)			((_x) << 6)
+#define S3C_GRSTCTL_TxFFlsh			(1 << 5)
+#define S3C_GRSTCTL_RxFFlsh			(1 << 4)
+#define S3C_GRSTCTL_INTknQFlsh			(1 << 3)
+#define S3C_GRSTCTL_FrmCntrRst			(1 << 2)
+#define S3C_GRSTCTL_HSftRst			(1 << 1)
+#define S3C_GRSTCTL_CSftRst			(1 << 0)
+
+#define S3C_GINTSTS				S3C_HSOTG_REG(0x014)
+#define S3C_GINTMSK				S3C_HSOTG_REG(0x018)
+
+#define S3C_GINTSTS_WkUpInt			(1 << 31)
+#define S3C_GINTSTS_SessReqInt			(1 << 30)
+#define S3C_GINTSTS_DisconnInt			(1 << 29)
+#define S3C_GINTSTS_ConIDStsChng		(1 << 28)
+#define S3C_GINTSTS_PTxFEmp			(1 << 26)
+#define S3C_GINTSTS_HChInt			(1 << 25)
+#define S3C_GINTSTS_PrtInt			(1 << 24)
+#define S3C_GINTSTS_FetSusp			(1 << 22)
+#define S3C_GINTSTS_incompIP			(1 << 21)
+#define S3C_GINTSTS_IncomplSOIN			(1 << 20)
+#define S3C_GINTSTS_OEPInt			(1 << 19)
+#define S3C_GINTSTS_IEPInt			(1 << 18)
+#define S3C_GINTSTS_EPMis			(1 << 17)
+#define S3C_GINTSTS_EOPF			(1 << 15)
+#define S3C_GINTSTS_ISOutDrop			(1 << 14)
+#define S3C_GINTSTS_EnumDone			(1 << 13)
+#define S3C_GINTSTS_USBRst			(1 << 12)
+#define S3C_GINTSTS_USBSusp			(1 << 11)
+#define S3C_GINTSTS_ErlySusp			(1 << 10)
+#define S3C_GINTSTS_GOUTNakEff			(1 << 7)
+#define S3C_GINTSTS_GINNakEff			(1 << 6)
+#define S3C_GINTSTS_NPTxFEmp			(1 << 5)
+#define S3C_GINTSTS_RxFLvl			(1 << 4)
+#define S3C_GINTSTS_SOF				(1 << 3)
+#define S3C_GINTSTS_OTGInt			(1 << 2)
+#define S3C_GINTSTS_ModeMis			(1 << 1)
+#define S3C_GINTSTS_CurMod_Host			(1 << 0)
+
+#define S3C_GRXSTSR				S3C_HSOTG_REG(0x01C)
+#define S3C_GRXSTSP				S3C_HSOTG_REG(0x020)
+
+#define S3C_GRXSTS_FN_MASK			(0x7f << 25)
+#define S3C_GRXSTS_FN_SHIFT			(25)
+
+#define S3C_GRXSTS_PktSts_MASK			(0xf << 17)
+#define S3C_GRXSTS_PktSts_SHIFT			(17)
+#define S3C_GRXSTS_PktSts_GlobalOutNAK		(0x1 << 17)
+#define S3C_GRXSTS_PktSts_OutRX			(0x2 << 17)
+#define S3C_GRXSTS_PktSts_OutDone		(0x3 << 17)
+#define S3C_GRXSTS_PktSts_SetupDone		(0x4 << 17)
+#define S3C_GRXSTS_PktSts_SetupRX		(0x6 << 17)
+
+#define S3C_GRXSTS_DPID_MASK			(0x3 << 15)
+#define S3C_GRXSTS_DPID_SHIFT			(15)
+#define S3C_GRXSTS_ByteCnt_MASK			(0x7ff << 4)
+#define S3C_GRXSTS_ByteCnt_SHIFT		(4)
+#define S3C_GRXSTS_EPNum_MASK			(0xf << 0)
+#define S3C_GRXSTS_EPNum_SHIFT			(0)
+
+#define S3C_GRXFSIZ				S3C_HSOTG_REG(0x024)
+
+#define S3C_GNPTXFSIZ				S3C_HSOTG_REG(0x028)
+
+#define S3C_GNPTXFSIZ_NPTxFDep_MASK		(0xffff << 16)
+#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT		(16)
+#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT		(0xffff)
+#define S3C_GNPTXFSIZ_NPTxFDep(_x)		((_x) << 16)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK		(0xffff << 0)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT		(0)
+#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT		(0xffff)
+#define S3C_GNPTXFSIZ_NPTxFStAddr(_x)		((_x) << 0)
+
+#define S3C_GNPTXSTS				S3C_HSOTG_REG(0x02C)
+
+#define S3C_GNPTXSTS_NPtxQTop_MASK		(0x7f << 24)
+#define S3C_GNPTXSTS_NPtxQTop_SHIFT		(24)
+
+#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK		(0xff << 16)
+#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT	(16)
+#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v)	(((_v) >> 16) & 0xff)
+
+#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK		(0xffff << 0)
+#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT	(0)
+#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v)	(((_v) >> 0) & 0xffff)
+
+
+#define S3C_HPTXFSIZ				S3C_HSOTG_REG(0x100)
+
+#define S3C_DPTXFSIZn(_a)			S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4))
+
+#define S3C_DPTXFSIZn_DPTxFSize_MASK		(0xffff << 16)
+#define S3C_DPTXFSIZn_DPTxFSize_SHIFT		(16)
+#define S3C_DPTXFSIZn_DPTxFSize_GET(_v)		(((_v) >> 16) & 0xffff)
+#define S3C_DPTXFSIZn_DPTxFSize_LIMIT		(0xffff)
+#define S3C_DPTXFSIZn_DPTxFSize(_x)		((_x) << 16)
+
+#define S3C_DPTXFSIZn_DPTxFStAddr_MASK		(0xffff << 0)
+#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT		(0)
+
+/* Device mode registers */
+#define S3C_DCFG				S3C_HSOTG_REG(0x800)
+
+#define S3C_DCFG_EPMisCnt_MASK			(0x1f << 18)
+#define S3C_DCFG_EPMisCnt_SHIFT			(18)
+#define S3C_DCFG_EPMisCnt_LIMIT			(0x1f)
+#define S3C_DCFG_EPMisCnt(_x)			((_x) << 18)
+
+#define S3C_DCFG_PerFrInt_MASK			(0x3 << 11)
+#define S3C_DCFG_PerFrInt_SHIFT			(11)
+#define S3C_DCFG_PerFrInt_LIMIT			(0x3)
+#define S3C_DCFG_PerFrInt(_x)			((_x) << 11)
+
+#define S3C_DCFG_DevAddr_MASK			(0x7f << 4)
+#define S3C_DCFG_DevAddr_SHIFT			(4)
+#define S3C_DCFG_DevAddr_LIMIT			(0x7f)
+#define S3C_DCFG_DevAddr(_x)			((_x) << 4)
+
+#define S3C_DCFG_NZStsOUTHShk			(1 << 2)
+
+#define S3C_DCFG_DevSpd_MASK			(0x3 << 0)
+#define S3C_DCFG_DevSpd_SHIFT			(0)
+#define S3C_DCFG_DevSpd_HS			(0x0 << 0)
+#define S3C_DCFG_DevSpd_FS			(0x1 << 0)
+#define S3C_DCFG_DevSpd_LS			(0x2 << 0)
+#define S3C_DCFG_DevSpd_FS48			(0x3 << 0)
+
+#define S3C_DCTL				S3C_HSOTG_REG(0x804)
+
+#define S3C_DCTL_PWROnPrgDone			(1 << 11)
+#define S3C_DCTL_CGOUTNak			(1 << 10)
+#define S3C_DCTL_SGOUTNak			(1 << 9)
+#define S3C_DCTL_CGNPInNAK			(1 << 8)
+#define S3C_DCTL_SGNPInNAK			(1 << 7)
+#define S3C_DCTL_TstCtl_MASK			(0x7 << 4)
+#define S3C_DCTL_TstCtl_SHIFT			(4)
+#define S3C_DCTL_GOUTNakSts			(1 << 3)
+#define S3C_DCTL_GNPINNakSts			(1 << 2)
+#define S3C_DCTL_SftDiscon			(1 << 1)
+#define S3C_DCTL_RmtWkUpSig			(1 << 0)
+
+#define S3C_DSTS				S3C_HSOTG_REG(0x808)
+
+#define S3C_DSTS_SOFFN_MASK			(0x3fff << 8)
+#define S3C_DSTS_SOFFN_SHIFT			(8)
+#define S3C_DSTS_SOFFN_LIMIT			(0x3fff)
+#define S3C_DSTS_SOFFN(_x)			((_x) << 8)
+#define S3C_DSTS_ErraticErr			(1 << 3)
+#define S3C_DSTS_EnumSpd_MASK			(0x3 << 1)
+#define S3C_DSTS_EnumSpd_SHIFT			(1)
+#define S3C_DSTS_EnumSpd_HS			(0x0 << 1)
+#define S3C_DSTS_EnumSpd_FS			(0x1 << 1)
+#define S3C_DSTS_EnumSpd_LS			(0x2 << 1)
+#define S3C_DSTS_EnumSpd_FS48			(0x3 << 1)
+
+#define S3C_DSTS_SuspSts			(1 << 0)
+
+#define S3C_DIEPMSK				S3C_HSOTG_REG(0x810)
+
+#define S3C_DIEPMSK_INEPNakEffMsk		(1 << 6)
+#define S3C_DIEPMSK_INTknEPMisMsk		(1 << 5)
+#define S3C_DIEPMSK_INTknTXFEmpMsk		(1 << 4)
+#define S3C_DIEPMSK_TimeOUTMsk			(1 << 3)
+#define S3C_DIEPMSK_AHBErrMsk			(1 << 2)
+#define S3C_DIEPMSK_EPDisbldMsk			(1 << 1)
+#define S3C_DIEPMSK_XferComplMsk		(1 << 0)
+
+#define S3C_DOEPMSK				S3C_HSOTG_REG(0x814)
+
+#define S3C_DOEPMSK_Back2BackSetup		(1 << 6)
+#define S3C_DOEPMSK_OUTTknEPdisMsk		(1 << 4)
+#define S3C_DOEPMSK_SetupMsk			(1 << 3)
+#define S3C_DOEPMSK_AHBErrMsk			(1 << 2)
+#define S3C_DOEPMSK_EPDisbldMsk			(1 << 1)
+#define S3C_DOEPMSK_XferComplMsk		(1 << 0)
+
+#define S3C_DAINT				S3C_HSOTG_REG(0x818)
+#define S3C_DAINTMSK				S3C_HSOTG_REG(0x81C)
+
+#define S3C_DAINT_OutEP_SHIFT			(16)
+#define S3C_DAINT_OutEP(x)			(1 << ((x) + 16))
+#define S3C_DAINT_InEP(x)			(1 << (x))
+
+#define S3C_DTKNQR1				S3C_HSOTG_REG(0x820)
+#define S3C_DTKNQR2				S3C_HSOTG_REG(0x824)
+#define S3C_DTKNQR3				S3C_HSOTG_REG(0x830)
+#define S3C_DTKNQR4				S3C_HSOTG_REG(0x834)
+
+#define S3C_DVBUSDIS				S3C_HSOTG_REG(0x828)
+#define S3C_DVBUSPULSE				S3C_HSOTG_REG(0x82C)
+
+#define S3C_DIEPCTL0				S3C_HSOTG_REG(0x900)
+#define S3C_DOEPCTL0				S3C_HSOTG_REG(0xB00)
+#define S3C_DIEPCTL(_a)				S3C_HSOTG_REG(0x900 + ((_a) * 0x20))
+#define S3C_DOEPCTL(_a)				S3C_HSOTG_REG(0xB00 + ((_a) * 0x20))
+
+/* EP0 specialness:
+ * bits[29..28] - reserved (no SetD0PID, SetD1PID)
+ * bits[25..22] - should always be zero, this isn't a periodic endpoint
+ * bits[10..0] - MPS setting differenct for EP0
+*/
+#define S3C_D0EPCTL_MPS_MASK			(0x3 << 0)
+#define S3C_D0EPCTL_MPS_SHIFT			(0)
+#define S3C_D0EPCTL_MPS_64			(0x0 << 0)
+#define S3C_D0EPCTL_MPS_32			(0x1 << 0)
+#define S3C_D0EPCTL_MPS_16			(0x2 << 0)
+#define S3C_D0EPCTL_MPS_8			(0x3 << 0)
+
+#define S3C_DxEPCTL_EPEna			(1 << 31)
+#define S3C_DxEPCTL_EPDis			(1 << 30)
+#define S3C_DxEPCTL_SetD1PID			(1 << 29)
+#define S3C_DxEPCTL_SetOddFr			(1 << 29)
+#define S3C_DxEPCTL_SetD0PID			(1 << 28)
+#define S3C_DxEPCTL_SetEvenFr			(1 << 28)
+#define S3C_DxEPCTL_SNAK			(1 << 27)
+#define S3C_DxEPCTL_CNAK			(1 << 26)
+#define S3C_DxEPCTL_TxFNum_MASK			(0xf << 22)
+#define S3C_DxEPCTL_TxFNum_SHIFT		(22)
+#define S3C_DxEPCTL_TxFNum_LIMIT		(0xf)
+#define S3C_DxEPCTL_TxFNum(_x)			((_x) << 22)
+
+#define S3C_DxEPCTL_Stall			(1 << 21)
+#define S3C_DxEPCTL_Snp				(1 << 20)
+#define S3C_DxEPCTL_EPType_MASK			(0x3 << 18)
+#define S3C_DxEPCTL_EPType_SHIFT		(18)
+#define S3C_DxEPCTL_EPType_Control		(0x0 << 18)
+#define S3C_DxEPCTL_EPType_Iso			(0x1 << 18)
+#define S3C_DxEPCTL_EPType_Bulk			(0x2 << 18)
+#define S3C_DxEPCTL_EPType_Intterupt		(0x3 << 18)
+
+#define S3C_DxEPCTL_NAKsts			(1 << 17)
+#define S3C_DxEPCTL_DPID			(1 << 16)
+#define S3C_DxEPCTL_EOFrNum			(1 << 16)
+#define S3C_DxEPCTL_USBActEp			(1 << 15)
+#define S3C_DxEPCTL_NextEp_MASK			(0xf << 11)
+#define S3C_DxEPCTL_NextEp_SHIFT		(11)
+#define S3C_DxEPCTL_NextEp_LIMIT		(0xf)
+#define S3C_DxEPCTL_NextEp(_x)			((_x) << 11)
+
+#define S3C_DxEPCTL_MPS_MASK			(0x7ff << 0)
+#define S3C_DxEPCTL_MPS_SHIFT			(0)
+#define S3C_DxEPCTL_MPS_LIMIT			(0x7ff)
+#define S3C_DxEPCTL_MPS(_x)			((_x) << 0)
+
+#define S3C_DIEPINT(_a)				S3C_HSOTG_REG(0x908 + ((_a) * 0x20))
+#define S3C_DOEPINT(_a)				S3C_HSOTG_REG(0xB08 + ((_a) * 0x20))
+
+#define S3C_DxEPINT_INEPNakEff			(1 << 6)
+#define S3C_DxEPINT_Back2BackSetup		(1 << 6)
+#define S3C_DxEPINT_INTknEPMis			(1 << 5)
+#define S3C_DxEPINT_INTknTXFEmp			(1 << 4)
+#define S3C_DxEPINT_OUTTknEPdis			(1 << 4)
+#define S3C_DxEPINT_Timeout			(1 << 3)
+#define S3C_DxEPINT_Setup			(1 << 3)
+#define S3C_DxEPINT_AHBErr			(1 << 2)
+#define S3C_DxEPINT_EPDisbld			(1 << 1)
+#define S3C_DxEPINT_XferCompl			(1 << 0)
+
+#define S3C_DIEPTSIZ0				S3C_HSOTG_REG(0x910)
+
+#define S3C_DIEPTSIZ0_PktCnt_MASK		(0x3 << 19)
+#define S3C_DIEPTSIZ0_PktCnt_SHIFT		(19)
+#define S3C_DIEPTSIZ0_PktCnt_LIMIT		(0x3)
+#define S3C_DIEPTSIZ0_PktCnt(_x)		((_x) << 19)
+
+#define S3C_DIEPTSIZ0_XferSize_MASK		(0x7f << 0)
+#define S3C_DIEPTSIZ0_XferSize_SHIFT		(0)
+#define S3C_DIEPTSIZ0_XferSize_LIMIT		(0x7f)
+#define S3C_DIEPTSIZ0_XferSize(_x)		((_x) << 0)
+
+
+#define DOEPTSIZ0				S3C_HSOTG_REG(0xB10)
+#define S3C_DOEPTSIZ0_SUPCnt_MASK		(0x3 << 29)
+#define S3C_DOEPTSIZ0_SUPCnt_SHIFT		(29)
+#define S3C_DOEPTSIZ0_SUPCnt_LIMIT		(0x3)
+#define S3C_DOEPTSIZ0_SUPCnt(_x)		((_x) << 29)
+
+#define S3C_DOEPTSIZ0_PktCnt			(1 << 19)
+#define S3C_DOEPTSIZ0_XferSize_MASK		(0x7f << 0)
+#define S3C_DOEPTSIZ0_XferSize_SHIFT		(0)
+
+#define S3C_DIEPTSIZ(_a)			S3C_HSOTG_REG(0x910 + ((_a) * 0x20))
+#define S3C_DOEPTSIZ(_a)			S3C_HSOTG_REG(0xB10 + ((_a) * 0x20))
+
+#define S3C_DxEPTSIZ_MC_MASK			(0x3 << 29)
+#define S3C_DxEPTSIZ_MC_SHIFT			(29)
+#define S3C_DxEPTSIZ_MC_LIMIT			(0x3)
+#define S3C_DxEPTSIZ_MC(_x)			((_x) << 29)
+
+#define S3C_DxEPTSIZ_PktCnt_MASK		(0x3ff << 19)
+#define S3C_DxEPTSIZ_PktCnt_SHIFT		(19)
+#define S3C_DxEPTSIZ_PktCnt_GET(_v)		(((_v) >> 19) & 0x3ff)
+#define S3C_DxEPTSIZ_PktCnt_LIMIT		(0x3ff)
+#define S3C_DxEPTSIZ_PktCnt(_x)			((_x) << 19)
+
+#define S3C_DxEPTSIZ_XferSize_MASK		(0x7ffff << 0)
+#define S3C_DxEPTSIZ_XferSize_SHIFT		(0)
+#define S3C_DxEPTSIZ_XferSize_GET(_v)		(((_v) >> 0) & 0x7ffff)
+#define S3C_DxEPTSIZ_XferSize_LIMIT		(0x7ffff)
+#define S3C_DxEPTSIZ_XferSize(_x)		((_x) << 0)
+
+
+#define S3C_DIEPDMA(_a)				S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
+#define S3C_DOEPDMA(_a)				S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
+
+#define S3C_EPFIFO(_a)				S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index c4ca3920ca4..f615308ccdf 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -67,12 +67,52 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 
 /* Helper function availablity */
 
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+/* S3C6400 SDHCI setup */
+
+#ifdef CONFIG_S3C6400_SETUP_SDHCI
+extern char *s3c6400_hsmmc_clksrcs[4];
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
+
+static inline void s3c6400_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+#endif  /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6400_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6400_SETUP_SDHCI */
+
+/* S3C6410 SDHCI setup */
+
 #ifdef CONFIG_S3C6410_SETUP_SDHCI
 extern char *s3c6410_hsmmc_clksrcs[4];
 
-extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-
 extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 					   void __iomem *r,
 					   struct mmc_ios *ios,
@@ -82,7 +122,7 @@ extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
 static inline void s3c6410_default_sdhci0(void)
 {
 	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
@@ -93,7 +133,7 @@ static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void)
 {
 	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
 }
 #else
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h
new file mode 100644
index 00000000000..dd04db04310
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/udc-hs.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hostg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hostg_dmamode	dma;
+	unsigned int		is_osc : 1;
+};
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
new file mode 100644
index 00000000000..54b762acb5a
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
@@ -0,0 +1,49 @@
+/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-watchdog.h>
+#include <mach/map.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+static inline void arch_wdt_reset(void)
+{
+	struct clk *wdtclk;
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	wdtclk = clk_get(NULL, "watchdog");
+	if (!IS_ERR(wdtclk)) {
+		clk_enable(wdtclk);
+	} else
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+}
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
new file mode 100644
index 00000000000..cfd326a8b69
--- /dev/null
+++ b/arch/arm/plat-s3c/pm-gpio.c
@@ -0,0 +1,380 @@
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON	(0x00)
+#define OFFS_DAT	(0x04)
+#define OFFS_UP		(0x08)
+
+static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon;
+
+	/* GPACON only has one bit per control / data and no PULLUPs.
+	 * GPACON[x] = 0 => Output, 1 => SFN */
+
+	/* first set all SFN bits to SFN */
+
+	gpcon = old_gpcon | gps_gpcon;
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* now set all the other bits */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_1bit = {
+	.save	= s3c_gpio_pm_1bit_save,
+	.resume = s3c_gpio_pm_1bit_resume,
+};
+
+static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+	return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+	return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+	return con == 1;
+}
+
+/**
+ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT }  Change DAT first
+ * { IN => SFN }  Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN }  Change CON first, so new data will not glitch
+ * { SFN => IN }  Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ *     state for when it is next output.
+ */
+static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon, old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	/* restore GPIO pull-up settings */
+	__raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+	/* Create a change_mask of all the items that need to have
+	 * their CON value changed before their DAT value, so that
+	 * we minimise the work between the two settings.
+	 */
+
+	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+
+	/* Write the new CON settings */
+
+	gpcon = old_gpcon & ~change_mask;
+	gpcon |= gps_gpcon & change_mask;
+
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* Now change any items that require DAT,CON */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_2bit = {
+	.save	= s3c_gpio_pm_2bit_save,
+	.resume = s3c_gpio_pm_2bit_resume,
+};
+
+#ifdef CONFIG_ARCH_S3C64XX
+static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8)
+		chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+	u32 old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+	return change_mask;
+}
+
+static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+{
+	void __iomem *con = chip->base + (index * 4);
+	u32 old_gpcon = __raw_readl(con);
+	u32 gps_gpcon = chip->pm_save[index + 1];
+	u32 gpcon, mask;
+
+	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+	gpcon = old_gpcon & ~mask;
+	gpcon |= gps_gpcon & mask;
+
+	__raw_writel(gpcon, con);
+}
+
+static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon[2];
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpdat = chip->pm_save[2];
+
+	/* First, modify the CON settings */
+
+	old_gpcon[0] = 0;
+	old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+	s3c_gpio_pm_4bit_con(chip, 0);
+	if (chip->chip.ngpio > 8) {
+		old_gpcon[0] = __raw_readl(base - 4);
+		s3c_gpio_pm_4bit_con(chip, -1);
+	}
+
+	/* Now change the configurations that require DAT,CON */
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[1], base + OFFS_CON);
+	if (chip->chip.ngpio > 8)
+		__raw_writel(chip->pm_save[0], base - 4);
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8) {
+		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[0], old_gpcon[1],
+			  __raw_readl(base - 4),
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+	} else
+		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[1],
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_4bit = {
+	.save	= s3c_gpio_pm_4bit_save,
+	.resume = s3c_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->save == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->save(ourchip);
+}
+
+/**
+ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void s3c_pm_save_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_save_gpio(ourchip);
+
+		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+			  ourchip->chip.label,
+			  ourchip->pm_save[0],
+			  ourchip->pm_save[1],
+			  ourchip->pm_save[2],
+			  ourchip->pm_save[3]);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
+
+/**
+ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->resume == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->resume(ourchip);
+}
+
+void s3c_pm_restore_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip)
+			continue;
+
+		s3c_pm_resume_gpio(ourchip);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 061182ca66e..8d97db2c7a0 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -21,11 +21,10 @@
 
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
 #include <asm/irq.h>
 
@@ -70,6 +69,8 @@ static inline void s3c_pm_debug_init(void)
 
 /* Save the UART configurations if we are configured for debug. */
 
+unsigned char pm_uart_udivslot;
+
 #ifdef CONFIG_S3C2410_PM_DEBUG
 
 struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
@@ -83,6 +84,12 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
 	save->umcon = __raw_readl(regs + S3C2410_UMCON);
 	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
 }
 
 static void s3c_pm_save_uarts(void)
@@ -98,11 +105,16 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
 {
 	void __iomem *regs = S3C_VA_UARTx(uart);
 
+	s3c_pm_arch_update_uart(regs, save);
+
 	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
 	__raw_writel(save->ucon,  regs + S3C2410_UCON);
 	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
 	__raw_writel(save->umcon, regs + S3C2410_UMCON);
 	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
 }
 
 static void s3c_pm_restore_uarts(void)
@@ -313,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
 
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
 	s3c_pm_check_restore();
 
 	/* ok, let's return from sleep */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2c8a2f5d75f..5b0bc914f58 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -71,6 +71,7 @@ config PM_SIMTEC
 config S3C2410_DMA
 	bool "S3C2410 DMA support"
 	depends on ARCH_S3C2410
+	select S3C_DMA
 	help
 	  S3C2410 DMA support. This is needed for drivers like sound which
 	  use the S3C2410's DMA system to move data to and from the
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 91adfa71c17..ee1baf11ad9 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -45,7 +45,8 @@ struct s3c_adc_client {
 	unsigned char		 channel;
 
 	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2);
+	void	(*convert_cb)(unsigned val1, unsigned val2,
+			      unsigned *samples_left);
 };
 
 struct adc_device {
@@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select)
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
 					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1),
+					void (*conv)(unsigned d0, unsigned d1,
+						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
@@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	data1 = readl(adc->regs + S3C2410_ADCDAT1);
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+	client->nr_samples--;
+	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
 
-	if (--client->nr_samples > 0) {
+	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
 		client->select_cb(1);
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1a8347cec20..aa119863c5c 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
@@ -47,27 +48,27 @@
 /* LED devices */
 
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF4,
+	.gpio		= S3C2410_GPF(4),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF5,
+	.gpio		= S3C2410_GPF(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF6,
+	.gpio		= S3C2410_GPF(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF7,
+	.gpio		= S3C2410_GPF(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
@@ -184,15 +185,15 @@ void __init smdk_machine_init(void)
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
 
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 16ac01d9b8a..4eb378c89a3 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = {
 struct platform_device *s3c24xx_uart_devs[4] = {
 };
 
-/* USB Host Controller */
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_USBHOST,
-		.end   = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 07326f63236..196b1912365 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -31,10 +31,10 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
-
 #include <mach/map.h>
 
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
+#include <plat/regs-dma.h>
 
 /* io map for dma */
 static void __iomem *dma_base;
@@ -44,8 +44,6 @@ static int dma_channels;
 
 static struct s3c24xx_dma_selection dma_sel;
 
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 /* debugging functions */
 
@@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 #define dbg_showchan(chan) do { } while(0)
 #endif /* CONFIG_S3C2410_DMA_DEBUG */
 
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return dma_chan_map[channel];
-}
-
 /* s3c2410_dma_stats_timeout
  *
  * Update DMA stats from timeout info
@@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
 	return 0;
 }
 
-
-
 /* s3c2410_dma_loadbuffer
  *
  * load a buffer, and update the channel state
@@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			dma_addr_t data, int size)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	struct s3c2410_dma_buf *buf;
 	unsigned long flags;
 
@@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
 
 int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;
 
 	if (chan == NULL)
@@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 	chan->irq_claimed = 0;
 
 	if (!(channel & DMACH_LOW_LEVEL))
-		dma_chan_map[channel] = NULL;
+		s3c_dma_chan_map[channel] = NULL;
 
 	local_irq_restore(flags);
 
@@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 int
 s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
 /* s3c2410_dma_config
  *
  * xfersize:     size of unit in bytes (1,2,4)
- * dcon:         base value of the DCONx register
 */
 
 int s3c2410_dma_config(unsigned int channel,
-		       int xferunit,
-		       int dcon)
+		       int xferunit)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int dcon;
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
 		 __func__, channel, xferunit, dcon);
@@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel,
 
 	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
 
-	dcon |= chan->dcon & dma_sel.dcon_mask;
+	dcon = chan->dcon & dma_sel.dcon_mask;
 
 	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
 
+	switch (chan->req_ch) {
+	case DMACH_I2S_IN:
+	case DMACH_I2S_OUT:
+	case DMACH_PCM_IN:
+	case DMACH_PCM_OUT:
+	case DMACH_MIC_IN:
+	default:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_SDI:
+		/* note, ensure if need HANDSHAKE or not */
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_XD0:
+	case DMACH_XD1:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_HCLK;
+		break;
+	}
+
 	switch (xferunit) {
 	case 1:
 		dcon |= S3C2410_DCON_BYTE;
@@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel,
 
 EXPORT_SYMBOL(s3c2410_dma_config);
 
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
-
-	chan->flags = flags;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 
 /* s3c2410_dma_devconfig
  *
@@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
  * source:    S3C2410_DMASRC_HW: source is hardware
  *            S3C2410_DMASRC_MEM: source is memory
  *
- * hwcfg:     the value for xxxSTCn register,
- *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=source is AHB, 1=source is APB
- *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(int channel,
 			  enum s3c2410_dmasrc source,
-			  int hwcfg,
 			  unsigned long devaddr)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int hwcfg;
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __func__, (int)source, hwcfg, devaddr);
+	pr_debug("%s: source=%d, devaddr=%08lx\n",
+		 __func__, (int)source, devaddr);
 
 	chan->source = source;
 	chan->dev_addr = devaddr;
-	chan->hw_cfg = hwcfg;
+
+	switch (chan->req_ch) {
+	case DMACH_XD0:
+	case DMACH_XD1:
+		hwcfg = 0; /* AHB */
+		break;
+
+	default:
+		hwcfg = S3C2410_DISRCC_APB;
+	}
+
+	/* always assume our peripheral desintation is a fixed
+	 * address in memory. */
+	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
 	case S3C2410_DMASRC_HW:
@@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
 {
- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
 	if (chan == NULL)
 		return -EINVAL;
@@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev)
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
-	s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
-	s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+	s3c2410_dma_config(no, cp->xfer_unit);
+	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
 
 	/* re-select the dma source for this channel */
 
@@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
  found:
 	dmach = &s3c2410_chans[ch];
 	dmach->map = ch_map;
-	dma_chan_map[channel] = dmach;
+	dmach->req_ch = channel;
+	s3c_dma_chan_map[channel] = dmach;
 
 	/* select the channel */
 
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 4a899c279eb..95df059b5a1 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
 
 int s3c2410_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
+	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
+		return -EINVAL;	/* not valid interrupts */
 
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
+	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
+		return -EINVAL;	/* not valid pin */
 
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+	if (pin < S3C2410_GPF(4))
+		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
 
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+	if (pin < S3C2410_GPG(0))
+		return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
 
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irq2pin(unsigned int irq)
-{
-	if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
-		return S3C2410_GPF0 + (irq - IRQ_EINT0);
-
-	if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
-		return S3C2410_GPF4 + (irq - IRQ_EINT4);
-
-	if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
-		return S3C2410_GPG0 + (irq - IRQ_EINT8);
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 5c0491bf738..6d7a961d326 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -22,6 +23,7 @@
 #include <mach/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
 
@@ -77,9 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
+		.base	= S3C2410_GPACON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
 		.chip	= {
-			.base			= S3C2410_GPA0,
+			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOA",
 			.ngpio			= 24,
@@ -88,45 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[1] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
+		.base	= S3C2410_GPBCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPB0,
+			.base			= S3C2410_GPB(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOB",
 			.ngpio			= 16,
 		},
 	},
 	[2] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
+		.base	= S3C2410_GPCCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPC0,
+			.base			= S3C2410_GPC(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOC",
 			.ngpio			= 16,
 		},
 	},
 	[3] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
+		.base	= S3C2410_GPDCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPD0,
+			.base			= S3C2410_GPD(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOD",
 			.ngpio			= 16,
 		},
 	},
 	[4] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
+		.base	= S3C2410_GPECON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPE0,
+			.base			= S3C2410_GPE(0),
 			.label			= "GPIOE",
 			.owner			= THIS_MODULE,
 			.ngpio			= 16,
 		},
 	},
 	[5] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
+		.base	= S3C2410_GPFCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPF0,
+			.base			= S3C2410_GPF(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOF",
 			.ngpio			= 8,
@@ -134,14 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[6] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
+		.base	= S3C2410_GPGCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPG0,
+			.base			= S3C2410_GPG(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
-			.ngpio			= 10,
+			.ngpio			= 16,
 			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
 		},
+	}, {
+		.base	= S3C2410_GPHCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPH(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOH",
+			.ngpio			= 11,
+		},
 	},
 };
 
@@ -156,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c24xx_gpiolib_init);
+core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
index c78efe316fc..9565ead1bc9 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
  *
  * Copyright (C) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -10,8 +10,10 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/dma-core.h>
+
 extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
 
 #define DMA_CH_VALID		(1<<31)
 #define DMA_CH_NEVER		(1<<30)
@@ -31,8 +33,8 @@ struct s3c24xx_dma_map {
 	const char		*name;
 	struct s3c24xx_dma_addr  hw_addr;
 
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
+	unsigned long		 channels[S3C_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
 };
 
 struct s3c24xx_dma_selection {
@@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
 */
 
 struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
 	unsigned int	flags;				/* flags */
 };
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index eed8f78e759..c4d133436fc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -58,7 +58,6 @@
 #define S3C24XX_SZ_SPI		SZ_1M
 #define S3C24XX_SZ_SDI		SZ_1M
 #define S3C24XX_SZ_NAND		SZ_1M
-#define S3C24XX_SZ_USBHOST	SZ_1M
 
 /* GPIO ports */
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
index c75882113e0..fb45dd9adca 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
@@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
 	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
 				s3c_irqwake_eintmask);
 }
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
new file mode 100644
index 00000000000..3bc0a216df9
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -0,0 +1,145 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC		(0x00)
+#define S3C2410_DMA_DISRCC		(0x04)
+#define S3C2410_DMA_DIDST		(0x08)
+#define S3C2410_DMA_DIDSTC		(0x0C)
+#define S3C2410_DMA_DCON		(0x10)
+#define S3C2410_DMA_DSTAT		(0x14)
+#define S3C2410_DMA_DCSRC		(0x18)
+#define S3C2410_DMA_DCDST		(0x1C)
+#define S3C2410_DMA_DMASKTRIG		(0x20)
+#define S3C2412_DMA_DMAREQSEL		(0x24)
+#define S3C2443_DMA_DMAREQSEL		(0x24)
+
+#define S3C2410_DISRCC_INC		(1<<0)
+#define S3C2410_DISRCC_APB		(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP		(1<<2)
+#define S3C2410_DMASKTRIG_ON		(1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1<<0)
+
+#define S3C2410_DCON_DEMAND		(0<<31)
+#define S3C2410_DCON_HANDSHAKE		(1<<31)
+#define S3C2410_DCON_SYNC_PCLK		(0<<30)
+#define S3C2410_DCON_SYNC_HCLK		(1<<30)
+
+#define S3C2410_DCON_INTREQ		(1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0		(0<<24)
+#define S3C2410_DCON_CH0_UART0		(1<<24)
+#define S3C2410_DCON_CH0_SDI		(2<<24)
+#define S3C2410_DCON_CH0_TIMER		(3<<24)
+#define S3C2410_DCON_CH0_USBEP1		(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1		(0<<24)
+#define S3C2410_DCON_CH1_UART1		(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI		(2<<24)
+#define S3C2410_DCON_CH1_SPI		(3<<24)
+#define S3C2410_DCON_CH1_USBEP2		(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO		(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI		(1<<24)
+#define S3C2410_DCON_CH2_SDI		(2<<24)
+#define S3C2410_DCON_CH2_TIMER		(3<<24)
+#define S3C2410_DCON_CH2_USBEP3		(4<<24)
+
+#define S3C2410_DCON_CH3_UART2		(0<<24)
+#define S3C2410_DCON_CH3_SDI		(1<<24)
+#define S3C2410_DCON_CH3_SPI		(2<<24)
+#define S3C2410_DCON_CH3_TIMER		(3<<24)
+#define S3C2410_DCON_CH3_USBEP4		(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT		(24)
+#define S3C2410_DCON_SRCMASK		(7<<24)
+
+#define S3C2410_DCON_BYTE		(0<<20)
+#define S3C2410_DCON_HALFWORD		(1<<20)
+#define S3C2410_DCON_WORD		(2<<20)
+
+#define S3C2410_DCON_AUTORELOAD		(0<<22)
+#define S3C2410_DCON_NORELOAD		(1<<22)
+#define S3C2410_DCON_HWTRIG		(1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT		(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO		(5<<24)
+#define S3C2440_DCON_CH0_PCMIN		(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT		(5<<24)
+#define S3C2440_DCON_CH1_SDI		(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN		(5<<24)
+#define S3C2440_DCON_CH2_MICIN		(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN		(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT		(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 062a29339a9..56e5253ca02 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -30,6 +30,7 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
@@ -75,43 +76,10 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_CLKSLOW),
 };
 
-static struct gpio_sleep {
-	void __iomem	*base;
-	unsigned int	 gpcon;
-	unsigned int	 gpdat;
-	unsigned int	 gpup;
-} gpio_save[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-	},
-	[7] = {
-		.base	= S3C2410_GPHCON,
-	},
-};
-
 static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
-
 /* s3c_pm_check_resume_pin
  *
  * check to see if the pin is configured correctly for sleep mode, and
@@ -156,195 +124,15 @@ void s3c_pm_configure_extint(void)
 	 * and then configure it as an input if it is not
 	*/
 
-	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
-	}
-
-	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
 	}
-}
-
-/* offsets for CON/DAT/UP registers */
-
-#define OFFS_CON	(S3C2410_GPACON - S3C2410_GPACON)
-#define OFFS_DAT	(S3C2410_GPADAT - S3C2410_GPACON)
-#define OFFS_UP		(S3C2410_GPBUP  - S3C2410_GPBCON)
-
-/* s3c_pm_save_gpios()
- *
- * Save the state of the GPIOs
- */
-
-void s3c_pm_save_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	unsigned int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		void __iomem *base = gps->base;
-
-		gps->gpcon = __raw_readl(base + OFFS_CON);
-		gps->gpdat = __raw_readl(base + OFFS_DAT);
-
-		if (gpio > 0)
-			gps->gpup = __raw_readl(base + OFFS_UP);
 
+	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
 	}
 }
 
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return (con == 2 || con == 3);
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
- * @index: The number of the GPIO bank being resumed.
- * @gps: The sleep confgiuration for the bank.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-
-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
-{
-	void __iomem *base = gps->base;
-	unsigned long gps_gpcon = gps->gpcon;
-	unsigned long gps_gpdat = gps->gpdat;
-	unsigned long old_gpcon;
-	unsigned long old_gpdat;
-	unsigned long old_gpup = 0x0;
-	unsigned long gpcon;
-	int nr;
-
-	old_gpcon = __raw_readl(base + OFFS_CON);
-	old_gpdat = __raw_readl(base + OFFS_DAT);
-
-	if (base == S3C2410_GPACON) {
-		/* GPACON only has one bit per control / data and no PULLUPs.
-		 * GPACON[x] = 0 => Output, 1 => SFN */
-
-		/* first set all SFN bits to SFN */
-
-		gpcon = old_gpcon | gps->gpcon;
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* now set all the other bits */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-	} else {
-		unsigned long old, new, mask;
-		unsigned long change_mask = 0x0;
-
-		old_gpup = __raw_readl(base + OFFS_UP);
-
-		/* Create a change_mask of all the items that need to have
-		 * their CON value changed before their DAT value, so that
-		 * we minimise the work between the two settings.
-		 */
-
-		for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-			old = (old_gpcon & mask) >> nr;
-			new = (gps_gpcon & mask) >> nr;
-
-			/* If there is no change, then skip */
-
-			if (old == new)
-				continue;
-
-			/* If both are special function, then skip */
-
-			if (is_sfn(old) && is_sfn(new))
-				continue;
-
-			/* Change is IN => OUT, do not change now */
-
-			if (is_in(old) && is_out(new))
-				continue;
-
-			/* Change is SFN => OUT, do not change now */
-
-			if (is_sfn(old) && is_out(new))
-				continue;
-
-			/* We should now be at the case of IN=>SFN,
-			 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-			change_mask |= mask;
-		}
-
-		/* Write the new CON settings */
-
-		gpcon = old_gpcon & ~change_mask;
-		gpcon |= gps_gpcon & change_mask;
-
-		__raw_writel(gpcon, base + OFFS_CON);
-
-		/* Now change any items that require DAT,CON */
-
-		__raw_writel(gps_gpdat, base + OFFS_DAT);
-		__raw_writel(gps_gpcon, base + OFFS_CON);
-		__raw_writel(gps->gpup, base + OFFS_UP);
-	}
-
-	S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
-		  index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-
-/** s3c2410_pm_restore_gpios()
- *
- * Restore the state of the GPIOs
- */
-
-void s3c_pm_restore_gpios(void)
-{
-	struct gpio_sleep *gps = gpio_save;
-	int gpio;
-
-	for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
-		s3c2410_pm_restore_gpio(gpio, gps);
-	}
-}
 
 void s3c_pm_restore_core(void)
 {
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index d62b7e7fb35..71a6accf114 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -11,6 +11,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/gpio.h>
 
 struct platform_device;
 
@@ -20,6 +21,6 @@ struct platform_device;
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 8b403cbb53d..9edf7894eed 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 					  int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 0);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE12, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8fccd4e549f..f34d0fc69ad 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 				       int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 0);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
 	}
 }
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 54375a00a7d..5ebd8b425a5 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
 
@@ -38,6 +39,10 @@ config CPU_S3C6400_CLOCK
 	  Common clock support code for the S3C6400 that is shared
 	  by other CPUs in the series, such as the S3C6410.
 
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -59,4 +64,9 @@ config S3C64XX_SETUP_FB_24BPP
 	help
 	  Common setup code for S3C64XX with an 24bpp RGB display helper.
 
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
 endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 2e6d79bf8f3..2ed5df34f9e 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -24,8 +24,19 @@ obj-y				+= gpiolib.o
 obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
 obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
 
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
 # Device setup
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index ad1b9682c9c..0bc2fa1dfc4 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -27,6 +27,12 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
 struct clk clk_27m = {
 	.name		= "clk_27m",
 	.id		= -1,
@@ -152,6 +158,18 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_48m,
 		.enable		= s3c64xx_sclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
 	},
 };
 
@@ -246,6 +264,7 @@ static struct clk *clks[] __initdata = {
 	&clk_epll,
 	&clk_27m,
 	&clk_48m,
+	&clk_h2,
 };
 
 void __init s3c64xx_register_clocks(void)
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index 91f49a3a665..b1fdd83940a 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -101,9 +102,24 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 
+
+struct sysdev_class s3c64xx_sysclass = {
+	.name	= "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+	.cls	= &s3c64xx_sysclass,
+};
+
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -115,5 +131,21 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	iotable_init(mach_desc, size);
 
 	idcode = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!idcode) {
+		/* S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read. */
+
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
 	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
+
+static __init int s3c64xx_sysdev_init(void)
+{
+	sysdev_class_register(&s3c64xx_sysclass);
+	return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
new file mode 100644
index 00000000000..67aa93dbb69
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -0,0 +1,722 @@
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+#include <plat/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+	struct sys_device	 sysdev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	struct s3c2410_dma_chan *channels;
+	enum dma_ch		 chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+		 chan->number,
+		 readl(chan->regs + PL080_CH_SRC_ADDR),
+		 readl(chan->regs + PL080_CH_DST_ADDR),
+		 readl(chan->regs + PL080_CH_LLI),
+		 readl(chan->regs + PL080_CH_CONTROL),
+		 readl(chan->regs + PL080S_CH_CONTROL2),
+		 readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+		 lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *ptr;
+	struct s3c64xx_dma_buff *end;
+
+	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+		 chan->number, chan->next, chan->curr, chan->end);
+
+	ptr = chan->next;
+	end = chan->end;
+
+	if (debug_show_buffs) {
+		for (; ptr != NULL; ptr = ptr->next) {
+			pr_debug("DMA%d: %08x ",
+				 chan->number, ptr->lli_dma);
+			show_lli(ptr->lli);
+		}
+	}
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned int start, offs;
+
+	start = 0;
+
+	if (channel >= DMACH_PCM1_TX)
+		start = 8;
+
+	for (offs = 0; offs < 8; offs++) {
+		chan = &s3c2410_chans[start + offs];
+		if (!chan->in_use)
+			goto found;
+	}
+
+	return NULL;
+
+found:
+	s3c_dma_chan_map[channel] = chan;
+	return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (xferunit) {
+	case 1:
+		chan->hw_width = 0;
+		break;
+	case 2:
+		chan->hw_width = 1;
+		break;
+	case 4:
+		chan->hw_width = 2;
+		break;
+	default:
+		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+				 struct pl080s_lli *lli,
+				 dma_addr_t data, int size)
+{
+	dma_addr_t src, dst;
+	u32 control0, control1;
+
+	switch (chan->source) {
+	case S3C2410_DMASRC_HW:
+		src = chan->dev_addr;
+		dst = data;
+		control0 = PL080_CONTROL_SRC_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_DST_INCR;
+		break;
+
+	case S3C2410_DMASRC_MEM:
+		src = data;
+		dst = chan->dev_addr;
+		control0 = PL080_CONTROL_DST_AHB2;
+		control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+		control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
+		control0 |= PL080_CONTROL_SRC_INCR;
+		break;
+	default:
+		BUG();
+	}
+
+	/* note, we do not currently setup any of the burst controls */
+
+	control1 = size >> chan->hw_width;	/* size in no of xfers */
+	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
+	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+	lli->next_lli = 0;
+	lli->control0 = control0;
+	lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+				struct pl080s_lli *lli)
+{
+	void __iomem *regs = chan->regs;
+
+	pr_debug("%s: LLI %p => regs\n", __func__, lli);
+	show_lli(lli);
+
+	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+	writel(lli->next_lli, regs + PL080_CH_LLI);
+	writel(lli->control0, regs + PL080_CH_CONTROL);
+	writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dmac *dmac = chan->dmac;
+	u32 config;
+	u32 bit = chan->bit;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: clearing interrupts\n", __func__);
+
+	/* clear interrupts */
+	writel(bit, dmac->regs + PL080_TC_CLEAR);
+	writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+	pr_debug("%s: starting channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_ENABLE;
+
+	pr_debug("%s: writing config %08x\n", __func__, config);
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+	u32 config;
+	int timeout;
+
+	pr_debug("%s: stopping channel\n", __func__);
+
+	dbg_showchan(chan);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_HALT;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	timeout = 1000;
+	do {
+		config = readl(chan->regs + PL080S_CH_CONFIG);
+		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+		if (config & PL080_CONFIG_ACTIVE)
+			udelay(10);
+		else
+			break;
+		} while (--timeout > 0);
+
+	if (config & PL080_CONFIG_ACTIVE) {
+		printk(KERN_ERR "%s: channel still active\n", __func__);
+		return -EFAULT;
+	}
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+					 struct s3c64xx_dma_buff *buf,
+					 enum s3c2410_dma_buffresult result)
+{
+	if (chan->callback_fn != NULL)
+		(chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+	kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *buff, *next;
+	u32 config;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: flushing channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	/* dump all the buffers associated with this channel */
+
+	for (buff = chan->curr; buff != NULL; buff = next) {
+		next = buff->next;
+		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+		s3c64xx_dma_freebuff(buff);
+	}
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c64xx_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c64xx_dma_stop(chan);
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c64xx_dma_flush(chan);
+
+	/* belive PAUSE/RESUME are no-ops */
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_STARTED:
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	struct s3c64xx_dma_buff *next;
+	struct s3c64xx_dma_buff *buff;
+	struct pl080s_lli *lli;
+	int ret;
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	if (!buff) {
+		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+		return -ENOMEM;
+	}
+
+	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	if (!lli) {
+		printk(KERN_ERR "%s: no memory for lli\n", __func__);
+		ret = -ENOMEM;
+		goto err_buff;
+	}
+
+	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+	buff->lli = lli;
+	buff->pw = id;
+
+	s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+	if ((next = chan->next) != NULL) {
+		struct s3c64xx_dma_buff *end = chan->end;
+		struct pl080s_lli *endlli = end->lli;
+
+		pr_debug("enquing onto channel\n");
+
+		end->next = buff;
+		endlli->next_lli = buff->lli_dma;
+
+		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+			struct s3c64xx_dma_buff *curr = chan->curr;
+			lli->next_lli = curr->lli_dma;
+		}
+
+		if (next == chan->curr) {
+			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+			chan->next = buff;
+		}
+
+		show_lli(endlli);
+		chan->end = buff;
+	} else {
+		pr_debug("enquing onto empty channel\n");
+
+		chan->curr = buff;
+		chan->next = buff;
+		chan->end = buff;
+
+		s3c64xx_lli_to_regs(chan, lli);
+	}
+
+	show_lli(lli);
+
+	dbg_showchan(chan);
+	dbg_showbuffs(chan);
+	return 0;
+
+err_buff:
+	kfree(buff);
+	return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(int channel,
+			  enum s3c2410_dmasrc source,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	u32 peripheral;
+	u32 config = 0;
+
+	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
+		 __func__, channel, source, devaddr, chan);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	peripheral = (chan->peripheral & 0xf);
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+		break;
+	case S3C2410_DMASRC_MEM:
+		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+		break;
+	default:
+		printk(KERN_ERR "%s: bad source\n", __func__);
+		return -EINVAL;
+	}
+
+	/* allow TC and ERR interrupts */
+	config |= PL080_CONFIG_TC_IRQ_MASK;
+	config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+	pr_debug("%s: config %08x\n", __func__, config);
+
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+			    dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	if (src != NULL)
+		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+	if (dst != NULL)
+		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c64xx_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+	chan->peripheral = channel;
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+	return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		s3c_dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+
+static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	struct s3c2410_dma_chan *chan = dmac->channels + offs;
+
+	/* note, we currently do not bother to work out which buffer
+	 * or buffers have been completed since the last tc-irq. */
+
+	if (chan->callback_fn)
+		(chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
+}
+
+static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
+{
+	printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
+}
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+	struct s3c64xx_dmac *dmac = pw;
+	u32 tcstat, errstat;
+	u32 bit;
+	int offs;
+
+	tcstat = readl(dmac->regs + PL080_TC_STATUS);
+	errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		if (tcstat & bit) {
+			writel(bit, dmac->regs + PL080_TC_CLEAR);
+			s3c64xx_dma_tcirq(dmac, offs);
+		}
+
+		if (errstat & bit) {
+			s3c64xx_dma_errirq(dmac, offs);
+			writel(bit, dmac->regs + PL080_ERR_CLEAR);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+	.name		= "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+			     int irq, unsigned int base)
+{
+	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+	struct s3c64xx_dmac *dmac;
+	char clkname[16];
+	void __iomem *regs;
+	void __iomem *regptr;
+	int err, ch;
+
+	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+	if (!dmac) {
+		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+		return -ENOMEM;
+	}
+
+	dmac->sysdev.id = chno / 8;
+	dmac->sysdev.cls = &dma_sysclass;
+
+	err = sysdev_register(&dmac->sysdev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+		goto err_alloc;
+	}
+
+	regs = ioremap(base, 0x200);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+		err = -ENXIO;
+		goto err_dev;
+	}
+
+	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+	dmac->clk = clk_get(NULL, clkname);
+	if (IS_ERR(dmac->clk)) {
+		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+		err = PTR_ERR(dmac->clk);
+		goto err_map;
+	}
+
+	clk_enable(dmac->clk);
+
+	dmac->regs = regs;
+	dmac->chanbase = chbase;
+	dmac->channels = chptr;
+
+	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+	if (err < 0) {
+		printk(KERN_ERR "%s: failed to get irq\n", __func__);
+		goto err_clk;
+	}
+
+	regptr = regs + PL080_Cx_BASE(0);
+
+	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+		       __func__, chno, regptr);
+
+		chptr->bit = 1 << ch;
+		chptr->number = chno;
+		chptr->dmac = dmac;
+		chptr->regs = regptr;
+		regptr += PL008_Cx_STRIDE;
+	}
+
+	/* for the moment, permanently enable the controller */
+	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+	return 0;
+
+err_clk:
+	clk_disable(dmac->clk);
+	clk_put(dmac->clk);
+err_map:
+	iounmap(regs);
+err_dev:
+	sysdev_unregister(&dmac->sysdev);
+err_alloc:
+	kfree(dmac);
+	return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	if (!dma_pool) {
+		printk(KERN_ERR "%s: failed to create pool\n", __func__);
+		return -ENOMEM;
+	}
+
+	ret = sysdev_class_register(&dma_sysclass);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C_SYSREG(0x110));
+
+	/* Register standard DMA controlers */
+	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 78ee52cffc9..da7b60ee5e6 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
 }
 
 static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
 {
 	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
 	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
 }
 
 static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
@@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void)
 	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
 			    s3c64xx_gpiolib_add_4bit2);
 
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+			    s3c64xx_gpiolib_add_2bit);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
new file mode 100644
index 00000000000..0c30dd98672
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+	struct s3c64xx_dma_buff *next;
+
+	void			*pw;
+	struct pl080_lli	*lli;
+	dma_addr_t		 lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 bit;	      /* bit for enable/disable/etc */
+	unsigned char		 hw_width;
+	unsigned char		 peripheral;
+
+	unsigned int		 flags;
+	enum s3c2410_dmasrc	 source;
+
+
+	dma_addr_t		dev_addr;
+
+	struct s3c2410_dma_client *client;
+	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
+
+	void __iomem		*regs;
+
+	/* cdriver callbacks */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* buffer list and information */
+	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
+	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
+	struct s3c64xx_dma_buff	*end;		/* end of queue */
+
+	/* note, when channel is running in circular mode, curr is the
+	 * first buffer enqueued, end is the last and curr is where the
+	 * last buffer-done event is set-at. The buffers are not freed
+	 * and the last buffer hardware descriptor points back to the
+	 * first.
+	 */
+};
+
+#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index f865bf4d709..743a70094d0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -157,6 +157,7 @@
 
 #define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
 #define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
 
 /* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
  * that they are sourced from the GPIO pins but with a different scheme for
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
new file mode 100644
index 00000000000..d347de3ba0d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settigs. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index b1082c16324..52836d41e33 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -32,6 +32,7 @@
 #define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
 #define S3C_SCLK_GATE		S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 
 /* CLKDIV0 */
 #define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
index 571eaa2e54f..11f2e1e119b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -15,12 +15,13 @@
 /* Common init code for S3C6400 related SoCs */
 
 extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(void);
+extern void s3c6400_register_clocks(unsigned armclk_divlimit);
 extern void s3c6400_setup_clocks(void);
 
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
 extern void s3c6400_init_clocks(int xtal);
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index 47e5155bb13..f81b7b818ba 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
@@ -26,6 +27,7 @@
 
 #include <mach/map.h>
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 #define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
@@ -134,6 +136,7 @@ static struct irq_chip s3c_irq_eint = {
 	.mask_ack	= s3c_irq_eint_maskack,
 	.ack		= s3c_irq_eint_ack,
 	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
 };
 
 /* s3c_irq_demux_eint
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c
new file mode 100644
index 00000000000..ca523b5d4c1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+	return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
index f22edf7c2d2..8dc5b6da978 100644
--- a/arch/arm/plat-s3c64xx/irq.c
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -14,12 +14,14 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/vic.h>
 
 #include <mach/map.h>
+#include <plat/regs-serial.h>
 #include <plat/regs-timer.h>
 #include <plat/cpu.h>
 
@@ -135,9 +137,6 @@ static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
 }
 
 /* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP	0x30
-#define S3C64XX_UINTSP	0x34
-#define S3C64XX_UINTM	0x38
 
 static void s3c_irq_uart_mask(unsigned int irq)
 {
@@ -233,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 
 	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
+	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
 
 	/* add the timer sub-irqs */
 
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
new file mode 100644
index 00000000000..07a6516a4f3
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -0,0 +1,175 @@
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/pm.h>
+#include <plat/regs-sys.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-clock.h>
+#include <plat/regs-syscon-power.h>
+#include <plat/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <plat/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+	unsigned long flags;
+	u32 reg;
+
+	local_irq_save(flags);
+	reg = __raw_readl(S3C64XX_GPNCON);
+	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+	__raw_writel(reg, S3C64XX_GPNCON);
+
+	reg = __raw_readl(S3C64XX_GPNDAT);
+	reg &= ~(clear << 12);
+	reg |= set << 12;
+	__raw_writel(reg, S3C64XX_GPNDAT);
+
+	local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C_APLL_LOCK),
+	SAVE_ITEM(S3C_MPLL_LOCK),
+	SAVE_ITEM(S3C_EPLL_LOCK),
+	SAVE_ITEM(S3C_CLK_SRC),
+	SAVE_ITEM(S3C_CLK_DIV0),
+	SAVE_ITEM(S3C_CLK_DIV1),
+	SAVE_ITEM(S3C_CLK_DIV2),
+	SAVE_ITEM(S3C_CLK_OUT),
+	SAVE_ITEM(S3C_HCLK_GATE),
+	SAVE_ITEM(S3C_PCLK_GATE),
+	SAVE_ITEM(S3C_SCLK_GATE),
+	SAVE_ITEM(S3C_MEM0_GATE),
+
+	SAVE_ITEM(S3C_EPLL_CON1),
+	SAVE_ITEM(S3C_EPLL_CON0),
+
+	SAVE_ITEM(S3C64XX_MEM0DRVCON),
+	SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+	SAVE_ITEM(S3C_APLL_CON),
+	SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+	SAVE_ITEM(S3C64XX_AHB_CON0),
+	SAVE_ITEM(S3C64XX_AHB_CON1),
+	SAVE_ITEM(S3C64XX_AHB_CON2),
+	
+	SAVE_ITEM(S3C64XX_SPCON),
+
+	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S3C64XX_EINT_MASK);
+
+	s3c_pm_debug_smdkled(1 << 2, 0);
+
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+#include <plat/regs-gpio.h>
+
+static void s3c64xx_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	/* clear any old wakeup */
+
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+		     S3C64XX_WAKEUP_STAT);
+
+	/* set the LED state to 0110 over sleep */
+	s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+static void s3c64xx_pm_prepare(void)
+{
+	/* store address of resume. */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+	pm_cpu_prep = s3c64xx_pm_prepare;
+	pm_cpu_sleep = s3c64xx_cpu_suspend;
+	pm_uart_udivslot = 1;
+	return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 05b17528041..1debc1f9f98 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -133,6 +133,65 @@ static struct clksrc_clk clk_mout_mpll = {
 	.sources	= &clk_src_mpll,
 };
 
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return rate;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s3c64xx_clk_arm_get_rate,
+	.set_rate	= s3c64xx_clk_arm_set_rate,
+	.round_rate	= s3c64xx_clk_arm_round_rate,
+};
+
 static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 {
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -520,6 +579,33 @@ static struct clksrc_clk clk_irda = {
 	.reg_divider	= S3C_CLK_DIV2,
 };
 
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clk_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clk_camif = {
+	.clk	= {
+		.name		= "camera",
+		.id		= -1,
+		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= 0,
+	.mask		= 0,
+	.sources	= &clkset_camif,
+	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
+	.reg_divider	= S3C_CLK_DIV0,
+};
+
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
@@ -536,6 +622,7 @@ static struct clksrc_clk *init_parents[] = {
 	&clk_audio0,
 	&clk_audio1,
 	&clk_irda,
+	&clk_camif,
 };
 
 static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
@@ -608,6 +695,7 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	clk_fout_epll.rate = epll;
 	clk_fout_apll.rate = apll;
 
+	clk_h2.rate = hclk2;
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
@@ -635,14 +723,30 @@ static struct clk *clks[] __initdata = {
 	&clk_audio0.clk,
 	&clk_audio1.clk,
 	&clk_irda.clk,
+	&clk_camif.clk,
+	&clk_arm,
 };
 
-void __init s3c6400_register_clocks(void)
+/**
+ * s3c6400_register_clocks - register clocks for s3c6400 and above
+ * @armclk_divlimit: Divisor mask for ARMCLK
+ *
+ * Register the clocks for the S3C6400 and above SoC range, such
+ * as ARMCLK and the clocks which have divider chains attached.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c6400_register_clocks(unsigned armclk_divlimit)
 {
 	struct clk *clkp;
 	int ret;
 	int ptr;
 
+	armclk_mask = armclk_divlimit;
+
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
 		clkp = clks[ptr];
 		ret = s3c24xx_register_clock(clkp);
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
new file mode 100644
index 00000000000..5417123b0ac
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S
new file mode 100644
index 00000000000..8e71fe90a37
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/sleep.S
@@ -0,0 +1,144 @@
+/* linux/0arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <plat/regs-gpio.h>
+#include <plat/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * Save enough processor state to allow the restart of the pm.c
+	 * code after resume.
+	 *
+	 * entry:
+	 *	r0 = pointer to the save block
+	*/
+
+ENTRY(s3c_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+
+	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
+
+	@@ save our state to ram
+	bl	s3c_pm_cb_flushcache
+
+	@@ call final suspend code
+	ldr	r0, =pm_cpu_sleep
+	ldr	pc, [r0]
+	
+	@@ return to the caller, after the MMU is turned on.
+	@@ restore the last bits of the stack and return.
+resume_with_mmu:
+	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
+
+	.data
+
+	/* the next bit is code, but it requires easy access to the
+	 * s3c_sleep_save_phys data before the MMU is switched on, so
+	 * we store the code that needs this variable in the .data where
+	 * the value can be written to (the .text segment is RO).
+	*/
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* Sleep magic, the word before the resume entry point so that the
+	 * bootloader can check for a resumeable image. */
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_reusme
+	 *
+	 * This is the entry point, stored by whatever method the bootloader
+	 * requires to get the kernel runnign again. This code expects to be
+	 * entered with no caches live and the MMU disabled. It will then
+	 * restore the MMU and other basic CP registers saved and restart
+	 * the kernel C code to finish the resume code.
+	*/
+
+ENTRY(s3c_cpu_resume)
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	ldr	r2, =LL_UART		/* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+	 * as the uboot version supplied resets these to inputs during the
+	 * resume checks.
+	*/
+
+	ldr	r3, =S3C64XX_PA_GPIO
+	ldr	r0, [ r3, #S3C64XX_GPNCON ]
+	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+	str	r0, [ r3, #S3C64XX_GPNCON ]
+
+	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
+	bic	r0, r0, #0xf << 12			@ GPN12..15
+	orr	r0, r0, #1 << 15			@ GPN15
+	str	r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+	 * are thoroughly cleaned just in case the bootloader didn't do it
+	 * for us. */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
+	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
+
+	ldr	r0, s3c_sleep_save_phys
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+
+	mov	r0, #0			@ restore copro access controls
+	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
+	nop
+	mov	pc, r2				/* jump back */
+
+	.end
diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig
new file mode 100644
index 00000000000..2cf37c35951
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Kconfig
@@ -0,0 +1,37 @@
+if ARCH_STMP3XXX
+
+menu "Freescale STMP3xxx implementations"
+
+choice
+	prompt "Select STMP3xxx chip family"
+
+config ARCH_STMP37XX
+	bool "Freescale SMTP37xx"
+	select CPU_ARM926T
+	---help---
+	 STMP37xx refers to 3700 through 3769 chips
+
+config ARCH_STMP378X
+	bool "Freescale STMP378x"
+	select CPU_ARM926T
+	---help---
+	 STMP378x refers to 3780 through 3789 chips
+
+endchoice
+
+choice
+	prompt "Select STMP3xxx board type"
+
+config MACH_STMP37XX
+	depends on ARCH_STMP37XX
+	bool "Freescale STMP37xx development board"
+
+config MACH_STMP378X
+	depends on ARCH_STMP378X
+	bool "Freescale STMP378x development board"
+
+endchoice
+
+endmenu
+
+endif
diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile
new file mode 100644
index 00000000000..31dd518f37a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+# Object file lists.
+obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
new file mode 100644
index 00000000000..5d2f19a09e4
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.c
@@ -0,0 +1,1135 @@
+/*
+ * Clock manipulation routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/clkdev.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static struct clk osc_24M;
+static struct clk pll_clk;
+static struct clk cpu_clk;
+static struct clk hclk;
+
+static int propagate_rate(struct clk *);
+
+static inline int clk_is_busy(struct clk *clk)
+{
+	return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+	return clk && !IS_ERR(clk) && clk->ops;
+}
+
+static int std_clk_enable(struct clk *clk)
+{
+	if (clk->enable_reg) {
+		u32 clk_reg = __raw_readl(clk->enable_reg);
+		if (clk->enable_negate)
+			clk_reg &= ~(1 << clk->enable_shift);
+		else
+			clk_reg |= (1 << clk->enable_shift);
+		__raw_writel(clk_reg, clk->enable_reg);
+		if (clk->enable_wait)
+			udelay(clk->enable_wait);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int std_clk_disable(struct clk *clk)
+{
+	if (clk->enable_reg) {
+		u32 clk_reg = __raw_readl(clk->enable_reg);
+		if (clk->enable_negate)
+			clk_reg |= (1 << clk->enable_shift);
+		else
+			clk_reg &= ~(1 << clk->enable_shift);
+		__raw_writel(clk_reg, clk->enable_reg);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
+static int io_set_rate(struct clk *clk, u32 rate)
+{
+	u32 reg_frac, clkctrl_frac;
+	int i, ret = 0, mask = 0x1f;
+
+	clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate;
+
+	if (clkctrl_frac < 18 || clkctrl_frac > 35) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	reg_frac = __raw_readl(clk->scale_reg);
+	reg_frac &= ~(mask << clk->scale_shift);
+	__raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift),
+				clk->scale_reg);
+	if (clk->busy_reg) {
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i)
+			ret = -ETIMEDOUT;
+		else
+			ret = 0;
+	}
+out:
+	return ret;
+}
+
+static long io_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+	int mask = 0x1f;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static long per_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+	long div;
+	const int mask = 0xff;
+
+	if (clk->enable_reg &&
+			!(__raw_readl(clk->enable_reg) & clk->enable_shift))
+		clk->rate = 0;
+	else {
+		div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+		if (div)
+			rate /= div;
+		clk->rate = rate;
+	}
+
+	return clk->rate;
+}
+
+static int per_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = -EINVAL;
+	int div = (clk->parent->rate + rate - 1) / rate;
+	u32 reg_frac;
+	const int mask = 0xff;
+	int try = 10;
+	int i = -1;
+
+	if (div == 0 || div > mask)
+		goto out;
+
+	reg_frac = __raw_readl(clk->scale_reg);
+	reg_frac &= ~(mask << clk->scale_shift);
+
+	while (try--) {
+		__raw_writel(reg_frac | (div << clk->scale_shift),
+				clk->scale_reg);
+
+		if (clk->busy_reg) {
+			for (i = 10000; i; i--)
+				if (!clk_is_busy(clk))
+					break;
+		}
+		if (i)
+			break;
+	}
+
+	if (!i)
+		ret = -ETIMEDOUT;
+	else
+		ret = 0;
+
+out:
+	if (ret != 0)
+		printk(KERN_ERR "%s: error %d\n", __func__, ret);
+	return ret;
+}
+
+static long lcdif_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+	long div;
+	const int mask = 0xff;
+
+	div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+	if (div) {
+		rate /= div;
+		div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) &
+			BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC;
+		rate /= div;
+	}
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int lcdif_set_rate(struct clk *clk, u32 rate)
+{
+	int ret = 0;
+	/*
+	 * On 3700, we can get most timings exact by modifying ref_pix
+	 * and the divider, but keeping the phase timings at 1 (2
+	 * phases per cycle).
+	 *
+	 * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz,
+	 * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns.
+	 *
+	 * ns_cycle >= 2*18e3/(18*480) = 25/6
+	 * ns_cycle <= 2*35e3/(18*480) = 875/108
+	 *
+	 * Multiply the ns_cycle by 'div' to lengthen it until it fits the
+	 * bounds. This is the divider we'll use after ref_pix.
+	 *
+	 * 6 * ns_cycle >= 25 * div
+	 * 108 * ns_cycle <= 875 * div
+	 */
+	u32 ns_cycle = 1000000 / rate;
+	u32 div, reg_val;
+	u32 lowest_result = (u32) -1;
+	u32 lowest_div = 0, lowest_fracdiv = 0;
+
+	for (div = 1; div < 256; ++div) {
+		u32 fracdiv;
+		u32 ps_result;
+		int lower_bound = 6 * ns_cycle >= 25 * div;
+		int upper_bound = 108 * ns_cycle <= 875 * div;
+		if (!lower_bound)
+			break;
+		if (!upper_bound)
+			continue;
+		/*
+		 * Found a matching div. Calculate fractional divider needed,
+		 * rounded up.
+		 */
+		fracdiv = ((clk->parent->rate / 1000 * 18 / 2) *
+				ns_cycle + 1000 * div - 1) /
+				(1000 * div);
+		if (fracdiv < 18 || fracdiv > 35) {
+			ret = -EINVAL;
+			goto out;
+		}
+		/* Calculate the actual cycle time this results in */
+		ps_result = 6250 * div * fracdiv / 27;
+
+		/* Use the fastest result that doesn't break ns_cycle */
+		if (ps_result <= lowest_result) {
+			lowest_result = ps_result;
+			lowest_div = div;
+			lowest_fracdiv = fracdiv;
+		}
+	}
+
+	if (div >= 256 || lowest_result == (u32) -1) {
+		ret = -EINVAL;
+		goto out;
+	}
+	pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz "
+			"PIXCLK=%uMHz cycle=%u.%03uns\n",
+			lowest_fracdiv, lowest_div,
+			480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div,
+			lowest_result / 1000, lowest_result % 1000);
+
+	/* Program ref_pix phase fractional divider */
+	reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+	reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC;
+	reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC);
+	__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+	/* Ungate PFD */
+	stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX,
+			REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+	/* Program pix divider */
+	reg_val = __raw_readl(clk->scale_reg);
+	reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE);
+	reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV);
+	__raw_writel(reg_val, clk->scale_reg);
+
+	/* Wait for divider update */
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	}
+
+	/* Switch to ref_pix source */
+	reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+	reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX;
+	__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+
+out:
+	return ret;
+}
+
+
+static int cpu_set_rate(struct clk *clk, u32 rate)
+{
+	u32 reg_val;
+
+	if (rate < 24000)
+		return -EINVAL;
+	else if (rate == 24000) {
+		/* switch to the 24M source */
+		clk_set_parent(clk, &osc_24M);
+	} else {
+		int i;
+		u32 clkctrl_cpu = 1;
+		u32 c = clkctrl_cpu;
+		u32 clkctrl_frac = 1;
+		u32 val;
+		for ( ; c < 0x40; c++) {
+			u32 f = (pll_clk.rate*18/c + rate/2) / rate;
+			int s1, s2;
+
+			if (f < 18 || f > 35)
+				continue;
+			s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate;
+			s2 = pll_clk.rate*18/c/f - rate;
+			pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2);
+			if (abs(s1) > abs(s2)) {
+				clkctrl_cpu = c;
+				clkctrl_frac = f;
+			}
+			if (s2 == 0)
+				break;
+		};
+		pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+				clkctrl_cpu, clkctrl_frac);
+		if (c == 0x40) {
+			int  d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu -
+				rate;
+			if (abs(d) > 100 ||
+			    clkctrl_frac < 18 || clkctrl_frac > 35)
+				return -EINVAL;
+		}
+
+		/* 4.6.2 */
+		val = __raw_readl(clk->scale_reg);
+		val &= ~(0x3f << clk->scale_shift);
+		val |= clkctrl_frac;
+		clk_set_parent(clk, &osc_24M);
+		udelay(10);
+		__raw_writel(val, clk->scale_reg);
+		/* ungate */
+		__raw_writel(1<<7, clk->scale_reg + 8);
+		/* write clkctrl_cpu */
+		clk->saved_div = clkctrl_cpu;
+
+		reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+		reg_val &= ~0x3F;
+		reg_val |= clkctrl_cpu;
+		__raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up CPU divisor\n");
+			return -ETIMEDOUT;
+		}
+		clk_set_parent(clk, &pll_clk);
+		clk->saved_div = 0;
+		udelay(10);
+	}
+	return 0;
+}
+
+static long cpu_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+	rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f;
+	rate = ((rate + 9) / 10) * 10;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static long cpu_round_rate(struct clk *clk, u32 rate)
+{
+	unsigned long r = 0;
+
+	if (rate <= 24000)
+		r = 24000;
+	else {
+		u32 clkctrl_cpu = 1;
+		u32 clkctrl_frac;
+		do {
+			clkctrl_frac =
+				(pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate;
+			if (clkctrl_frac > 35)
+				continue;
+			if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 ==
+			    rate / 10)
+				break;
+		} while (pll_clk.rate / 2  >= clkctrl_cpu++ * rate);
+		if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate)
+			clkctrl_cpu--;
+		pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+				clkctrl_cpu, clkctrl_frac);
+		if (clkctrl_frac < 18)
+			clkctrl_frac = 18;
+		if (clkctrl_frac > 35)
+			clkctrl_frac = 35;
+
+		r = pll_clk.rate * 18;
+		r /= clkctrl_frac;
+		r /= clkctrl_cpu;
+		r = 10 * ((r + 9) / 10);
+	}
+	return r;
+}
+
+static long emi_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate * 18;
+
+	rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+	rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int clkseq_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -EINVAL;
+	int shift = 8;
+
+	/* bypass? */
+	if (parent == &osc_24M)
+		shift = 4;
+
+	if (clk->bypass_reg) {
+#ifdef CONFIG_ARCH_STMP378X
+		u32 hbus_val, cpu_val;
+
+		if (clk == &cpu_clk && shift == 4) {
+			hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+					HW_CLKCTRL_HBUS);
+			cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+					HW_CLKCTRL_CPU);
+
+			hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+				      BM_CLKCTRL_HBUS_DIV);
+			clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU;
+			cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+			cpu_val |= 1;
+
+			if (machine_is_stmp378x()) {
+				__raw_writel(hbus_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+				__raw_writel(cpu_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+				hclk.rate = 0;
+			}
+		} else if (clk == &cpu_clk && shift == 8) {
+			hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+							HW_CLKCTRL_HBUS);
+			cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+							HW_CLKCTRL_CPU);
+			hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+				      BM_CLKCTRL_HBUS_DIV);
+			hbus_val |= 2;
+			cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+			if (clk->saved_div)
+				cpu_val |= clk->saved_div;
+			else
+				cpu_val |= 2;
+
+			if (machine_is_stmp378x()) {
+				__raw_writel(hbus_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+				__raw_writel(cpu_val,
+					REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+				hclk.rate = 0;
+			}
+		}
+#endif
+		__raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int hbus_set_rate(struct clk *clk, u32 rate)
+{
+	u8 div = 0;
+	int is_frac = 0;
+	u32 clkctrl_hbus;
+	struct clk *parent = clk->parent;
+
+	pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+			parent->rate);
+
+	if (rate > parent->rate)
+		return -EINVAL;
+
+	if (((parent->rate + rate/2) / rate) * rate != parent->rate &&
+	    parent->rate / rate < 32) {
+		pr_debug("%s: switching to fractional mode\n", __func__);
+		is_frac = 1;
+	}
+
+	if (is_frac)
+		div = (32 * rate + parent->rate / 2) / parent->rate;
+	else
+		div = (parent->rate + rate - 1) / rate;
+	pr_debug("%s: div calculated is %d\n", __func__, div);
+	if (!div || div > 0x1f)
+		return -EINVAL;
+
+	clk_set_parent(&cpu_clk, &osc_24M);
+	udelay(10);
+	clkctrl_hbus = __raw_readl(clk->scale_reg);
+	clkctrl_hbus &= ~0x3f;
+	clkctrl_hbus |= div;
+	clkctrl_hbus |= (is_frac << 5);
+
+	__raw_writel(clkctrl_hbus, clk->scale_reg);
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up CPU divisor\n");
+			return -ETIMEDOUT;
+		}
+	}
+	clk_set_parent(&cpu_clk, &pll_clk);
+	__raw_writel(clkctrl_hbus, clk->scale_reg);
+	udelay(10);
+	return 0;
+}
+
+static long hbus_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+
+	if (__raw_readl(clk->scale_reg) & 0x20) {
+		rate *= __raw_readl(clk->scale_reg) & 0x1f;
+		rate /= 32;
+	} else
+		rate /= __raw_readl(clk->scale_reg) & 0x1f;
+	clk->rate = rate;
+
+	return rate;
+}
+
+static int xbus_set_rate(struct clk *clk, u32 rate)
+{
+	u16 div = 0;
+	u32 clkctrl_xbus;
+
+	pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+			clk->parent->rate);
+
+	div = (clk->parent->rate + rate - 1) / rate;
+	pr_debug("%s: div calculated is %d\n", __func__, div);
+	if (!div || div > 0x3ff)
+		return -EINVAL;
+
+	clkctrl_xbus = __raw_readl(clk->scale_reg);
+	clkctrl_xbus &= ~0x3ff;
+	clkctrl_xbus |= div;
+	__raw_writel(clkctrl_xbus, clk->scale_reg);
+	if (clk->busy_reg) {
+		int i;
+		for (i = 10000; i; i--)
+			if (!clk_is_busy(clk))
+				break;
+		if (!i) {
+			printk(KERN_ERR "couldn't set up xbus divisor\n");
+			return -ETIMEDOUT;
+		}
+	}
+	return 0;
+}
+
+static long xbus_get_rate(struct clk *clk)
+{
+	long rate = clk->parent->rate;
+
+	rate /= __raw_readl(clk->scale_reg) & 0x3ff;
+	clk->rate = rate;
+
+	return rate;
+}
+
+
+/* Clock ops */
+
+static struct clk_ops std_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= per_get_rate,
+	.set_rate	= per_set_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops min_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+};
+
+static struct clk_ops cpu_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= cpu_get_rate,
+	.set_rate	= cpu_set_rate,
+	.round_rate	= cpu_round_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops io_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= io_get_rate,
+	.set_rate	= io_set_rate,
+};
+
+static struct clk_ops hbus_ops = {
+	.get_rate	= hbus_get_rate,
+	.set_rate	= hbus_set_rate,
+};
+
+static struct clk_ops xbus_ops = {
+	.get_rate	= xbus_get_rate,
+	.set_rate	= xbus_set_rate,
+};
+
+static struct clk_ops lcdif_ops = {
+	.enable		= std_clk_enable,
+	.disable	= std_clk_disable,
+	.get_rate	= lcdif_get_rate,
+	.set_rate	= lcdif_set_rate,
+	.set_parent	= clkseq_set_parent,
+};
+
+static struct clk_ops emi_ops = {
+	.get_rate	= emi_get_rate,
+};
+
+/* List of on-chip clocks */
+
+static struct clk osc_24M = {
+	.flags		= FIXED_RATE | ENABLED,
+	.rate		= 24000,
+};
+
+static struct clk pll_clk = {
+	.parent		= &osc_24M,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+	.enable_shift	= 16,
+	.enable_wait	= 10,
+	.flags		= FIXED_RATE | ENABLED,
+	.rate		= 480000,
+	.ops		= &min_ops,
+};
+
+static struct clk cpu_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 0,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 7,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU,
+	.busy_bit	= 28,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &cpu_ops,
+};
+
+static struct clk io_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 24,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &io_ops,
+};
+
+static struct clk hclk = {
+	.parent		= &cpu_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 7,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+	.busy_bit	= 29,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &hbus_ops,
+};
+
+static struct clk xclk = {
+	.parent		= &osc_24M,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+	.busy_bit	= 31,
+	.flags		= RATE_PROPAGATES | ENABLED,
+	.ops		= &xbus_ops,
+};
+
+static struct clk uart_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.flags		= ENABLED,
+	.ops		= &min_ops,
+};
+
+static struct clk audio_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 30,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk pwm_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 29,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk dri_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 28,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk digctl_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 27,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk timer_clk = {
+	.parent		= &xclk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+	.enable_shift	= 26,
+	.enable_negate	= 1,
+	.flags		= ENABLED,
+	.ops		= &min_ops,
+};
+
+static struct clk lcdif_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 1,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &lcdif_ops,
+};
+
+static struct clk ssp_clk = {
+	.parent		= &io_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+	.enable_shift	= 31,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 5,
+	.enable_negate	= 1,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &std_ops,
+};
+
+static struct clk gpmi_clk = {
+	.parent		= &io_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 4,
+	.flags		= NEEDS_SET_PARENT,
+	.ops		= &std_ops,
+};
+
+static struct clk spdif_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+static struct clk emi_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+	.scale_shift	= 8,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+	.busy_bit	= 28,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 6,
+	.flags		= ENABLED,
+	.ops		= &emi_ops,
+};
+
+static struct clk ir_clk = {
+	.parent		= &io_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_IR,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 3,
+	.ops		= &min_ops,
+};
+
+static struct clk saif_clk = {
+	.parent		= &pll_clk,
+	.scale_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.busy_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.busy_bit	= 29,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+	.enable_shift	= 31,
+	.enable_negate	= 1,
+	.bypass_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+	.bypass_shift	= 0,
+	.ops		= &std_ops,
+};
+
+static struct clk usb_clk = {
+	.parent		= &pll_clk,
+	.enable_reg	= REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+	.enable_shift	= 18,
+	.enable_negate	= 1,
+	.ops		= &min_ops,
+};
+
+/* list of all the clocks */
+static struct clk_lookup onchip_clks[] = {
+	{
+		.con_id = "osc_24M",
+		.clk = &osc_24M,
+	}, {
+		.con_id = "pll",
+		.clk = &pll_clk,
+	}, {
+		.con_id = "cpu",
+		.clk = &cpu_clk,
+	}, {
+		.con_id = "hclk",
+		.clk = &hclk,
+	}, {
+		.con_id = "xclk",
+		.clk = &xclk,
+	}, {
+		.con_id = "io",
+		.clk = &io_clk,
+	}, {
+		.con_id = "uart",
+		.clk = &uart_clk,
+	}, {
+		.con_id = "audio",
+		.clk = &audio_clk,
+	}, {
+		.con_id = "pwm",
+		.clk = &pwm_clk,
+	}, {
+		.con_id = "dri",
+		.clk = &dri_clk,
+	}, {
+		.con_id = "digctl",
+		.clk = &digctl_clk,
+	}, {
+		.con_id = "timer",
+		.clk = &timer_clk,
+	}, {
+		.con_id = "lcdif",
+		.clk = &lcdif_clk,
+	}, {
+		.con_id = "ssp",
+		.clk = &ssp_clk,
+	}, {
+		.con_id = "gpmi",
+		.clk = &gpmi_clk,
+	}, {
+		.con_id = "spdif",
+		.clk = &spdif_clk,
+	}, {
+		.con_id = "emi",
+		.clk = &emi_clk,
+	}, {
+		.con_id = "ir",
+		.clk = &ir_clk,
+	}, {
+		.con_id = "saif",
+		.clk = &saif_clk,
+	}, {
+		.con_id = "usb",
+		.clk = &usb_clk,
+	},
+};
+
+static int __init propagate_rate(struct clk *clk)
+{
+	struct clk_lookup *cl;
+
+	for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     cl++) {
+		if (unlikely(!clk_good(cl->clk)))
+			continue;
+		if (cl->clk->parent == clk && cl->clk->ops->get_rate) {
+			cl->clk->ops->get_rate(cl->clk);
+			if (cl->clk->flags & RATE_PROPAGATES)
+				propagate_rate(cl->clk);
+		}
+	}
+
+	return 0;
+}
+
+/* Exported API */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->ops->get_rate != NULL)
+		return clk->ops->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->ops->round_rate)
+		return clk->ops->round_rate(clk, rate);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static inline int close_enough(long rate1, long rate2)
+{
+	return rate1 && !((rate2 - rate1) * 1000 / rate1);
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (unlikely(!clk_good(clk)))
+		goto out;
+
+	if (clk->flags & FIXED_RATE || !clk->ops->set_rate)
+		goto out;
+
+	else if (!close_enough(clk->rate, rate)) {
+		ret = clk->ops->set_rate(clk, rate);
+		if (ret < 0)
+			goto out;
+		clk->rate = rate;
+		if (clk->flags & RATE_PROPAGATES)
+			propagate_rate(clk);
+	} else
+		ret = 0;
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		return -EINVAL;
+
+	if (clk->parent)
+		clk_enable(clk->parent);
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	clk->usage++;
+	if (clk->ops && clk->ops->enable)
+		clk->ops->enable(clk);
+
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void local_clk_disable(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	if (clk->usage == 0 && clk->ops->disable)
+		clk->ops->disable(clk);
+
+	if (clk->parent)
+		local_clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		return;
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	if ((--clk->usage) == 0 && clk->ops->disable)
+		clk->ops->disable(clk);
+
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+	if (clk->parent)
+		clk_disable(clk->parent);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Some additional API */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -ENODEV;
+	unsigned long clocks_flags;
+
+	if (unlikely(!clk_good(clk)))
+		goto out;
+
+	if (!clk->ops->set_parent)
+		goto out;
+
+	spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+	ret = clk->ops->set_parent(clk, parent);
+	if (!ret) {
+		/* disable if usage count is 0 */
+		local_clk_disable(parent);
+
+		parent->usage += clk->usage;
+		clk->parent->usage -= clk->usage;
+
+		/* disable if new usage count is 0 */
+		local_clk_disable(clk->parent);
+
+		clk->parent = parent;
+	}
+	spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return NULL;
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+static int __init clk_init(void)
+{
+	struct clk_lookup *cl;
+	struct clk_ops *ops;
+
+	spin_lock_init(&clocks_lock);
+
+	for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+	     cl++) {
+		if (cl->clk->flags & ENABLED)
+			clk_enable(cl->clk);
+		else
+			local_clk_disable(cl->clk);
+
+		ops = cl->clk->ops;
+
+		if ((cl->clk->flags & NEEDS_INITIALIZATION) &&
+				ops && ops->set_rate)
+			ops->set_rate(cl->clk, cl->clk->rate);
+
+		if (cl->clk->flags & FIXED_RATE) {
+			if (cl->clk->flags & RATE_PROPAGATES)
+				propagate_rate(cl->clk);
+		} else {
+			if (ops && ops->get_rate)
+				ops->get_rate(cl->clk);
+		}
+
+		if (cl->clk->flags & NEEDS_SET_PARENT) {
+			if (ops && ops->set_parent)
+				ops->set_parent(cl->clk, cl->clk->parent);
+		}
+
+		clkdev_add(cl);
+	}
+	return 0;
+}
+
+arch_initcall(clk_init);
diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h
new file mode 100644
index 00000000000..a6611e1a351
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.h
@@ -0,0 +1,61 @@
+/*
+ * Clock control driver for Freescale STMP37XX/STMP378X - internal header file
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__
+#define __ARCH_ARM_STMX3XXX_CLOCK_H__
+
+#ifndef __ASSEMBLER__
+
+struct clk_ops {
+	int (*enable) (struct clk *);
+	int (*disable) (struct clk *);
+	long (*get_rate) (struct clk *);
+	long (*round_rate) (struct clk *, u32);
+	int (*set_rate) (struct clk *, u32);
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+struct clk {
+	struct clk *parent;
+	u32 rate;
+	u32 flags;
+	u8 scale_shift;
+	u8 enable_shift;
+	u8 bypass_shift;
+	u8 busy_bit;
+	s8 usage;
+	int enable_wait;
+	int enable_negate;
+	u32 saved_div;
+	void __iomem *enable_reg;
+	void __iomem *scale_reg;
+	void __iomem *bypass_reg;
+	void __iomem *busy_reg;
+	struct clk_ops *ops;
+};
+
+#endif /* __ASSEMBLER__ */
+
+/* Flags */
+#define RATE_PROPAGATES      (1<<0)
+#define NEEDS_INITIALIZATION (1<<1)
+#define PARENT_SET_RATE      (1<<2)
+#define FIXED_RATE           (1<<3)
+#define ENABLED	             (1<<4)
+#define NEEDS_SET_PARENT     (1<<5)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c
new file mode 100644
index 00000000000..37b8a09148a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/core.c
@@ -0,0 +1,128 @@
+/*
+ * Freescale STMP37XX/STMP378X core routines
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-clkctrl.h>
+
+static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+	u32 c;
+	int timeout;
+
+	/* the process of software reset of IP block is done
+	   in several steps:
+
+	   - clear SFTRST and wait for block is enabled;
+	   - clear clock gating (CLKGATE bit);
+	   - set the SFTRST again and wait for block is in reset;
+	   - clear SFTRST and wait for reset completion.
+	*/
+	c = __raw_readl(hwreg);
+	c &= ~(1<<31);		/* clear SFTRST */
+	__raw_writel(c, hwreg);
+	for (timeout = 1000000; timeout > 0; timeout--)
+		/* still in SFTRST state ? */
+		if ((__raw_readl(hwreg) & (1<<31)) == 0)
+			break;
+	if (timeout <= 0) {
+		printk(KERN_ERR"%s(%p): timeout when enabling\n",
+				__func__, hwreg);
+		return -ETIME;
+	}
+
+	c = __raw_readl(hwreg);
+	c &= ~(1<<30);		/* clear CLKGATE */
+	__raw_writel(c, hwreg);
+
+	if (!just_enable) {
+		c = __raw_readl(hwreg);
+		c |= (1<<31);		/* now again set SFTRST */
+		__raw_writel(c, hwreg);
+		for (timeout = 1000000; timeout > 0; timeout--)
+			/* poll until CLKGATE set */
+			if (__raw_readl(hwreg) & (1<<30))
+				break;
+		if (timeout <= 0) {
+			printk(KERN_ERR"%s(%p): timeout when resetting\n",
+					__func__, hwreg);
+			return -ETIME;
+		}
+
+		c = __raw_readl(hwreg);
+		c &= ~(1<<31);		/* clear SFTRST */
+		__raw_writel(c, hwreg);
+		for (timeout = 1000000; timeout > 0; timeout--)
+			/* still in SFTRST state ? */
+			if ((__raw_readl(hwreg) & (1<<31)) == 0)
+				break;
+		if (timeout <= 0) {
+			printk(KERN_ERR"%s(%p): timeout when enabling "
+					"after reset\n", __func__, hwreg);
+			return -ETIME;
+		}
+
+		c = __raw_readl(hwreg);
+		c &= ~(1<<30);		/* clear CLKGATE */
+		__raw_writel(c, hwreg);
+	}
+	for (timeout = 1000000; timeout > 0; timeout--)
+		/* still in SFTRST state ? */
+		if ((__raw_readl(hwreg) & (1<<30)) == 0)
+			break;
+
+	if (timeout <= 0) {
+		printk(KERN_ERR"%s(%p): timeout when unclockgating\n",
+				__func__, hwreg);
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+	int try = 10;
+	int r;
+
+	while (try--) {
+		r = __stmp3xxx_reset_block(hwreg, just_enable);
+		if (!r)
+			break;
+		pr_debug("%s: try %d failed\n", __func__, 10 - try);
+	}
+	return r;
+}
+EXPORT_SYMBOL(stmp3xxx_reset_block);
+
+struct platform_device stmp3xxx_dbguart = {
+	.name = "stmp3xxx-dbguart",
+	.id = -1,
+};
+
+void __init stmp3xxx_init(void)
+{
+	/* Turn off auto-slow and other tricks */
+	stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+
+	stmp3xxx_dma_init();
+}
diff --git a/arch/arm/plat-stmp3xxx/devices.c b/arch/arm/plat-stmp3xxx/devices.c
new file mode 100644
index 00000000000..68fed4b8746
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/devices.c
@@ -0,0 +1,389 @@
+/*
+* Freescale STMP37XX/STMP378X platform devices
+*
+* Embedded Alley Solutions, Inc <source@embeddedalley.com>
+*
+* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+*/
+
+/*
+* The code contained herein is licensed under the GNU General Public
+* License. You may obtain a copy of the GNU General Public License
+* Version 2 or later at the following locations:
+*
+* http://www.opensource.org/licenses/gpl-license.html
+* http://www.gnu.org/copyleft/gpl.html
+*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-lcdif.h>
+#include <mach/regs-uartapp.h>
+#include <mach/regs-gpmi.h>
+#include <mach/regs-usbctrl.h>
+#include <mach/regs-ssp.h>
+#include <mach/regs-rtc.h>
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+static struct resource appuart_resources[] = {
+	{
+		.start = IRQ_UARTAPP_INTERNAL,
+		.end = IRQ_UARTAPP_INTERNAL,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_UARTAPP_RX_DMA,
+		.end = IRQ_UARTAPP_RX_DMA,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_UARTAPP_TX_DMA,
+		.end = IRQ_UARTAPP_TX_DMA,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = REGS_UARTAPP1_PHYS,
+		.end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE,
+		.flags = IORESOURCE_MEM,
+	}, {
+		/* Rx DMA channel */
+		.start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+		.flags = IORESOURCE_DMA,
+	}, {
+		/* Tx DMA channel */
+		.start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+		.end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device stmp3xxx_appuart = {
+	.name = "stmp3xxx-appuart",
+	.id = 0,
+	.resource = appuart_resources,
+	.num_resources = ARRAY_SIZE(appuart_resources),
+	.dev = {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device stmp3xxx_watchdog = {
+      .name   = "stmp3xxx_wdt",
+      .id     = -1,
+};
+
+static struct resource ts_resource[] = {
+	{
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_TOUCH_DETECT,
+		.end    = IRQ_TOUCH_DETECT,
+	}, {
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_LRADC_CH5,
+		.end    = IRQ_LRADC_CH5,
+	},
+};
+
+struct platform_device stmp3xxx_touchscreen = {
+	.name		= "stmp3xxx_ts",
+	.id		= -1,
+	.resource	= ts_resource,
+	.num_resources	= ARRAY_SIZE(ts_resource),
+};
+
+/*
+* Keypad device
+*/
+struct platform_device stmp3xxx_keyboard = {
+	.name		= "stmp3xxx-keyboard",
+	.id		= -1,
+};
+
+static struct resource gpmi_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+		.start = REGS_GPMI_PHYS,
+		.end = REGS_GPMI_PHYS + REGS_GPMI_SIZE,
+	}, {
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_GPMI_DMA,
+		.end = IRQ_GPMI_DMA,
+	}, {
+		.flags = IORESOURCE_DMA,
+		.start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH),
+		.end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH),
+	},
+};
+
+struct platform_device stmp3xxx_gpmi = {
+	.name = "gpmi",
+	.id = -1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = gpmi_resources,
+	.num_resources = ARRAY_SIZE(gpmi_resources),
+};
+
+static struct resource mmc1_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_SSP1_PHYS,
+		.end	= REGS_SSP1_PHYS + REGS_SSP_SIZE,
+	}, {
+		.flags	= IORESOURCE_DMA,
+		.start	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_SSP1_DMA,
+		.end	= IRQ_SSP1_DMA,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_SSP_ERROR,
+		.end	= IRQ_SSP_ERROR,
+	},
+};
+
+struct platform_device stmp3xxx_mmc = {
+	.name	= "stmp3xxx-mmc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = mmc1_resource,
+	.num_resources = ARRAY_SIZE(mmc1_resource),
+};
+
+static struct resource usb_resources[] = {
+	{
+		.start	= REGS_USBCTRL_PHYS,
+		.end	= REGS_USBCTRL_PHYS + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_USB_CTRL,
+		.end	= IRQ_USB_CTRL,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_udc = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource = usb_resources,
+	.num_resources = ARRAY_SIZE(usb_resources),
+};
+
+struct platform_device stmp3xxx_ehci = {
+	.name		= "fsl-ehci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= usb_resources,
+	.num_resources	= ARRAY_SIZE(usb_resources),
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.start	= REGS_RTC_PHYS,
+		.end	= REGS_RTC_PHYS + REGS_RTC_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_RTC_ALARM,
+		.end	= IRQ_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_RTC_1MSEC,
+		.end	= IRQ_RTC_1MSEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_rtc = {
+	.name		= "stmp3xxx-rtc",
+	.id		= -1,
+	.resource	= rtc_resources,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+};
+
+static struct resource ssp1_resources[] = {
+	{
+		.start	= REGS_SSP1_PHYS,
+		.end	= REGS_SSP1_PHYS + REGS_SSP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SSP1_DMA,
+		.end	= IRQ_SSP1_DMA,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource ssp2_resources[] = {
+	{
+		.start	= REGS_SSP2_PHYS,
+		.end	= REGS_SSP2_PHYS + REGS_SSP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SSP2_DMA,
+		.end	= IRQ_SSP2_DMA,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+		.end	= STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device stmp3xxx_spi1 = {
+	.name	= "stmp3xxx_ssp",
+	.id	= 1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = ssp1_resources,
+	.num_resources = ARRAY_SIZE(ssp1_resources),
+};
+
+struct platform_device stmp3xxx_spi2 = {
+	.name	= "stmp3xxx_ssp",
+	.id	= 2,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource = ssp2_resources,
+	.num_resources = ARRAY_SIZE(ssp2_resources),
+};
+
+static struct resource fb_resource[] = {
+	{
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_LCDIF_DMA,
+		.end	= IRQ_LCDIF_DMA,
+	}, {
+		.flags	= IORESOURCE_IRQ,
+		.start	= IRQ_LCDIF_ERROR,
+		.end	= IRQ_LCDIF_ERROR,
+	}, {
+		.flags	= IORESOURCE_MEM,
+		.start	= REGS_LCDIF_PHYS,
+		.end	= REGS_LCDIF_PHYS + REGS_LCDIF_SIZE,
+	},
+};
+
+struct platform_device stmp3xxx_framebuffer = {
+	.name		= "stmp3xxx-fb",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &common_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(fb_resource),
+	.resource	= fb_resource,
+};
+
+#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2)			\
+	static char *cmdline_device_##name;			\
+	static int cmdline_device_##name##_setup(char *dev)	\
+	{							\
+		cmdline_device_##name = dev + 1;		\
+		return 0;					\
+	}							\
+	__setup(#name, cmdline_device_##name##_setup);		\
+	int stmp3xxx_##name##_device_register(void)		\
+	{							\
+		struct platform_device *d = NULL;		\
+		if (!cmdline_device_##name ||			\
+			!strcmp(cmdline_device_##name, #dev1))	\
+				d = &stmp3xxx_##dev1;		\
+		else if (!strcmp(cmdline_device_##name, #dev2))	\
+				d = &stmp3xxx_##dev2;		\
+		else						\
+			printk(KERN_ERR"Unknown %s assignment '%s'.\n",	\
+				#name, cmdline_device_##name);	\
+		return d ? platform_device_register(d) : -ENOENT;	\
+	}
+
+CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1)
+CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2)
+
+struct platform_device stmp3xxx_backlight = {
+	.name		= "stmp3xxx-bl",
+	.id		= -1,
+};
+
+struct platform_device stmp3xxx_rotdec = {
+	.name	= "stmp3xxx-rotdec",
+	.id	= -1,
+};
+
+struct platform_device stmp3xxx_persistent = {
+	.name			= "stmp3xxx-persistent",
+	.id			= -1,
+};
+
+struct platform_device stmp3xxx_dcp_bootstream = {
+	.name			= "stmp3xxx-dcpboot",
+	.id			= -1,
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dcp_resources[] = {
+	{
+		.start = IRQ_DCP_VMI,
+		.end = IRQ_DCP_VMI,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = IRQ_DCP,
+		.end = IRQ_DCP,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device stmp3xxx_dcp = {
+	.name			= "stmp3xxx-dcp",
+	.id			= -1,
+	.resource		= dcp_resources,
+	.num_resources		= ARRAY_SIZE(dcp_resources),
+	.dev	= {
+		.dma_mask	= &common_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource battery_resource[] = {
+	{
+		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_VDD5V,
+		.end    = IRQ_VDD5V,
+	},
+};
+
+struct platform_device stmp3xxx_battery = {
+	.name   = "stmp3xxx-battery",
+	.resource = battery_resource,
+	.num_resources = ARRAY_SIZE(battery_resource),
+};
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
new file mode 100644
index 00000000000..d2f497764dc
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -0,0 +1,463 @@
+/*
+ * DMA helper routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: dmitry pervushin <dpervushin@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/cpufreq.h>
+
+#include <asm/page.h>
+
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-apbh.h>
+
+static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command);
+static const size_t pool_alignment = 8;
+static struct stmp3xxx_dma_user {
+	void *pool;
+	int inuse;
+	const char *name;
+} channels[MAX_DMA_CHANNELS];
+
+#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS)
+#define IS_USED(ch) (channels[ch].inuse)
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name)
+{
+	struct stmp3xxx_dma_user *user;
+	int err = 0;
+
+	user = channels + ch;
+	if (!IS_VALID_CHANNEL(ch)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (IS_USED(ch)) {
+		err = -EBUSY;
+		goto out;
+	}
+	/* Create a pool to allocate dma commands from */
+	user->pool = dma_pool_create(name, dev, pool_item_size,
+				     pool_alignment, PAGE_SIZE);
+	if (user->pool == NULL) {
+		err = -ENOMEM;
+		goto out;
+	}
+	user->name = name;
+	user->inuse++;
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_request);
+
+int stmp3xxx_dma_release(int ch)
+{
+	struct stmp3xxx_dma_user *user = channels + ch;
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(ch)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(ch)) {
+		err = -EBUSY;
+		goto out;
+	}
+	BUG_ON(user->pool == NULL);
+	dma_pool_destroy(user->pool);
+	user->inuse--;
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_release);
+
+int stmp3xxx_dma_read_semaphore(int channel)
+{
+	int sem = -1;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+				STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+		sem &= BM_APBH_CHn_SEMA_PHORE;
+		sem >>= BP_APBH_CHn_SEMA_PHORE;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+				STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+		sem &= BM_APBX_CHn_SEMA_PHORE;
+		sem >>= BP_APBX_CHn_SEMA_PHORE;
+		break;
+	default:
+		BUG();
+	}
+	return sem;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore);
+
+int stmp3xxx_dma_allocate_command(int channel,
+				  struct stmp3xxx_dma_descriptor *descriptor)
+{
+	struct stmp3xxx_dma_user *user = channels + channel;
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(channel)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(channel)) {
+		err = -EBUSY;
+		goto out;
+	}
+	if (descriptor == NULL) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	/* Allocate memory for a command from the buffer */
+	descriptor->command =
+	    dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle);
+
+	/* Check it worked */
+	if (!descriptor->command) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	memset(descriptor->command, 0, pool_item_size);
+out:
+	WARN_ON(err);
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_allocate_command);
+
+int stmp3xxx_dma_free_command(int channel,
+			      struct stmp3xxx_dma_descriptor *descriptor)
+{
+	int err = 0;
+
+	if (!IS_VALID_CHANNEL(channel)) {
+		err = -ENODEV;
+		goto out;
+	}
+	if (!IS_USED(channel)) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	/* Return the command memory to the pool */
+	dma_pool_free(channels[channel].pool, descriptor->command,
+		      descriptor->handle);
+
+	/* Initialise descriptor so we're not tempted to use it */
+	descriptor->command = NULL;
+	descriptor->handle = 0;
+	descriptor->virtual_buf_ptr = NULL;
+	descriptor->next_descr = NULL;
+
+	WARN_ON(err);
+out:
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_command);
+
+void stmp3xxx_dma_go(int channel,
+		     struct stmp3xxx_dma_descriptor *head, u32 semaphore)
+{
+	int ch = STMP3XXX_DMA_CHANNEL(channel);
+	void __iomem *c, *s;
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch;
+		s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch;
+		break;
+
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch;
+		s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch;
+		break;
+
+	default:
+		return;
+	}
+
+	/* Set next command */
+	__raw_writel(head->handle, c);
+	/* Set counting semaphore (kicks off transfer). Assumes
+	   peripheral has been set up correctly */
+	__raw_writel(semaphore, s);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_go);
+
+int stmp3xxx_dma_running(int channel)
+{
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+			0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+			    BM_APBH_CHn_SEMA_PHORE;
+
+	case STMP3XXX_BUS_APBX:
+		return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+			0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+			    BM_APBX_CHn_SEMA_PHORE;
+	default:
+		BUG();
+		return 0;
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_dma_running);
+
+/*
+ * Circular dma chain management
+ */
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+	int i;
+
+	for (i = 0; i < chain->total_count; i++)
+		stmp3xxx_dma_free_command(
+			STMP3XXX_DMA(chain->channel, chain->bus),
+			&chain->chain[i]);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_chain);
+
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+			    struct stmp3xxx_dma_descriptor descriptors[],
+			    unsigned items)
+{
+	int i;
+	int err = 0;
+
+	if (items == 0)
+		return err;
+
+	for (i = 0; i < items; i++) {
+		err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]);
+		if (err) {
+			WARN_ON(err);
+			/*
+			 * Couldn't allocate the whole chain.
+			 * deallocate what has been allocated
+			 */
+			if (i) {
+				do {
+					stmp3xxx_dma_free_command(ch,
+								  &descriptors
+								  [i]);
+				} while (i-- >= 0);
+			}
+			return err;
+		}
+
+		/* link them! */
+		if (i > 0) {
+			descriptors[i - 1].next_descr = &descriptors[i];
+			descriptors[i - 1].command->next =
+						descriptors[i].handle;
+		}
+	}
+
+	/* make list circular */
+	descriptors[items - 1].next_descr = &descriptors[0];
+	descriptors[items - 1].command->next = descriptors[0].handle;
+
+	chain->total_count = items;
+	chain->chain = descriptors;
+	chain->free_index = 0;
+	chain->active_index = 0;
+	chain->cooked_index = 0;
+	chain->free_count = items;
+	chain->active_count = 0;
+	chain->cooked_count = 0;
+	chain->bus = STMP3XXX_DMA_BUS(ch);
+	chain->channel = STMP3XXX_DMA_CHANNEL(ch);
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_make_chain);
+
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+	BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus)));
+	chain->free_index = 0;
+	chain->active_index = 0;
+	chain->cooked_index = 0;
+	chain->free_count = chain->total_count;
+	chain->active_count = 0;
+	chain->cooked_count = 0;
+}
+EXPORT_SYMBOL(stmp37xx_circ_clear_chain);
+
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count)
+{
+	BUG_ON(chain->cooked_count < count);
+
+	chain->cooked_count -= count;
+	chain->cooked_index += count;
+	chain->cooked_index %= chain->total_count;
+	chain->free_count += count;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_free);
+
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count)
+{
+	void __iomem *c;
+	u32 mask_clr, mask;
+	BUG_ON(chain->free_count < count);
+
+	chain->free_count -= count;
+	chain->free_index += count;
+	chain->free_index %= chain->total_count;
+	chain->active_count += count;
+
+	switch (chain->bus) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel;
+		mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA;
+		mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA);
+		break;
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel;
+		mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA;
+		mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA);
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	/* Set counting semaphore (kicks off transfer). Assumes
+	   peripheral has been set up correctly */
+	stmp3xxx_clearl(mask_clr, c);
+	stmp3xxx_setl(mask, c);
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_active);
+
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain)
+{
+	unsigned cooked;
+
+	cooked = chain->active_count -
+	  stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus));
+
+	chain->active_count -= cooked;
+	chain->active_index += cooked;
+	chain->active_index %= chain->total_count;
+
+	chain->cooked_count += cooked;
+
+	return cooked;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_cooked);
+
+void stmp3xxx_dma_set_alt_target(int channel, int function)
+{
+#if defined(CONFIG_ARCH_STMP37XX)
+	unsigned bits = 4;
+#elif defined(CONFIG_ARCH_STMP378X)
+	unsigned bits = 2;
+#else
+#error wrong arch
+#endif
+	int shift = STMP3XXX_DMA_CHANNEL(channel) * bits;
+	unsigned mask = (1<<bits) - 1;
+	void __iomem *c;
+
+	BUG_ON(function < 0 || function >= (1<<bits));
+	pr_debug("%s: channel = %d, using mask %x, "
+		 "shift = %d\n", __func__, channel, mask, shift);
+
+	switch (STMP3XXX_DMA_BUS(channel)) {
+	case STMP3XXX_BUS_APBH:
+		c = REGS_APBH_BASE + HW_APBH_DEVSEL;
+		break;
+	case STMP3XXX_BUS_APBX:
+		c = REGS_APBX_BASE + HW_APBX_DEVSEL;
+		break;
+	default:
+		BUG();
+	}
+	stmp3xxx_clearl(mask << shift, c);
+	stmp3xxx_setl(mask << shift, c);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target);
+
+void stmp3xxx_dma_suspend(void)
+{
+	stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+void stmp3xxx_dma_resume(void)
+{
+	stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+struct dma_notifier_block {
+	struct notifier_block nb;
+	void *data;
+};
+
+static int dma_cpufreq_notifier(struct notifier_block *self,
+				unsigned long phase, void *p)
+{
+	switch (phase) {
+	case CPUFREQ_POSTCHANGE:
+		stmp3xxx_dma_resume();
+		break;
+
+	case CPUFREQ_PRECHANGE:
+		stmp3xxx_dma_suspend();
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct dma_notifier_block dma_cpufreq_nb = {
+	.nb = {
+		.notifier_call = dma_cpufreq_notifier,
+	},
+};
+#endif /* CONFIG_CPU_FREQ */
+
+void __init stmp3xxx_dma_init(void)
+{
+	stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+			REGS_APBH_BASE + HW_APBH_CTRL0);
+	stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+			REGS_APBX_BASE + HW_APBX_CTRL0);
+#ifdef CONFIG_CPU_FREQ
+	cpufreq_register_notifier(&dma_cpufreq_nb.nb,
+				CPUFREQ_TRANSITION_NOTIFIER);
+#endif /* CONFIG_CPU_FREQ */
+}
diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
new file mode 100644
index 00000000000..f9c39772d7c
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
new file mode 100644
index 00000000000..b4e205b95f2
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
@@ -0,0 +1,33 @@
+/*
+ * Freescale STMP37XX/STMP378X CPU type detection
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_CPU_H
+#define __ASM_PLAT_CPU_H
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define cpu_is_stmp37xx()	(1)
+#else
+#define cpu_is_stmp37xx()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define cpu_is_stmp378x()	(1)
+#else
+#define cpu_is_stmp378x()	(0)
+#endif
+
+#endif /* __ASM_PLAT_CPU_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..fb3b969bf0a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -0,0 +1,42 @@
+/*
+ * Debugging macro include header
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		addeq	\rx, \rx, #0x00070000
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x00070000
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #0]		@ data register at 0
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h
new file mode 100644
index 00000000000..7c58557c676
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/dma.h
@@ -0,0 +1,153 @@
+/*
+ * Freescale STMP37XX/STMP378X DMA helper interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_DMA_H
+#define __ASM_PLAT_STMP3XXX_DMA_H
+
+#include <linux/platform_device.h>
+#include <linux/dmapool.h>
+
+#if !defined(MAX_PIO_WORDS)
+#define MAX_PIO_WORDS   (15)
+#endif
+
+#define STMP3XXX_BUS_APBH		0
+#define STMP3XXX_BUS_APBX		1
+#define STMP3XXX_DMA_MAX_CHANNEL	16
+#define STMP3XXX_DMA_BUS(dma)		((dma) / 16)
+#define STMP3XXX_DMA_CHANNEL(dma)	((dma) % 16)
+#define STMP3XXX_DMA(channel, bus)	((bus) * 16 + (channel))
+#define MAX_DMA_ADDRESS			0xffffffff
+#define MAX_DMA_CHANNELS		32
+
+struct stmp3xxx_dma_command {
+	u32 next;
+	u32 cmd;
+	union {
+		u32 buf_ptr;
+		u32 alternate;
+	};
+	u32 pio_words[MAX_PIO_WORDS];
+};
+
+struct stmp3xxx_dma_descriptor {
+	struct stmp3xxx_dma_command *command;
+	dma_addr_t handle;
+
+	/* The virtual address of the buffer pointer */
+	void *virtual_buf_ptr;
+	/* The next descriptor in a the DMA chain (optional) */
+	struct stmp3xxx_dma_descriptor *next_descr;
+};
+
+struct stmp37xx_circ_dma_chain {
+	unsigned total_count;
+	struct stmp3xxx_dma_descriptor *chain;
+
+	unsigned free_index;
+	unsigned free_count;
+	unsigned active_index;
+	unsigned active_count;
+	unsigned cooked_index;
+	unsigned cooked_count;
+
+	int bus;
+	unsigned channel;
+};
+
+static inline struct stmp3xxx_dma_descriptor
+    *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain)
+{
+	return &(chain->chain[chain->free_index]);
+}
+
+static inline struct stmp3xxx_dma_descriptor
+    *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain)
+{
+	return &(chain->chain[chain->cooked_index]);
+}
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name);
+int stmp3xxx_dma_release(int ch);
+int stmp3xxx_dma_allocate_command(int ch,
+				  struct stmp3xxx_dma_descriptor *descriptor);
+int stmp3xxx_dma_free_command(int ch,
+			      struct stmp3xxx_dma_descriptor *descriptor);
+void stmp3xxx_dma_continue(int channel, u32 semaphore);
+void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head,
+		     u32 semaphore);
+int stmp3xxx_dma_running(int ch);
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+			    struct stmp3xxx_dma_descriptor descriptors[],
+			    unsigned items);
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count);
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+		unsigned count);
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain);
+int stmp3xxx_dma_read_semaphore(int ch);
+void stmp3xxx_dma_init(void);
+void stmp3xxx_dma_set_alt_target(int ch, int target);
+void stmp3xxx_dma_suspend(void);
+void stmp3xxx_dma_resume(void);
+
+/*
+ * STMP37xx and STMP378x have different DMA control
+ * registers layout
+ */
+
+void stmp3xxx_arch_dma_freeze(int ch);
+void stmp3xxx_arch_dma_unfreeze(int ch);
+void stmp3xxx_arch_dma_reset_channel(int ch);
+void stmp3xxx_arch_dma_enable_interrupt(int ch);
+void stmp3xxx_arch_dma_clear_interrupt(int ch);
+int stmp3xxx_arch_dma_is_interrupt(int ch);
+
+static inline void stmp3xxx_dma_reset_channel(int ch)
+{
+	stmp3xxx_arch_dma_reset_channel(ch);
+}
+
+
+static inline void stmp3xxx_dma_freeze(int ch)
+{
+	stmp3xxx_arch_dma_freeze(ch);
+}
+
+static inline void stmp3xxx_dma_unfreeze(int ch)
+{
+	stmp3xxx_arch_dma_unfreeze(ch);
+}
+
+static inline void stmp3xxx_dma_enable_interrupt(int ch)
+{
+	stmp3xxx_arch_dma_enable_interrupt(ch);
+}
+
+static inline void stmp3xxx_dma_clear_interrupt(int ch)
+{
+	stmp3xxx_arch_dma_clear_interrupt(ch);
+}
+
+static inline int stmp3xxx_dma_is_interrupt(int ch)
+{
+	return stmp3xxx_arch_dma_is_interrupt(ch);
+}
+
+#endif /* __ASM_PLAT_STMP3XXX_DMA_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
new file mode 100644
index 00000000000..a8b57925617
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * Freescale STMP37XX/STMP378X GPIO interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_GPIO_H
+#define __ASM_PLAT_GPIO_H
+
+#define ARCH_NR_GPIOS	(32 * 3)
+#define gpio_to_irq(gpio) __gpio_to_irq(gpio)
+#define gpio_get_value(gpio) __gpio_get_value(gpio)
+#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
new file mode 100644
index 00000000000..e166432910a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
@@ -0,0 +1,12 @@
+#ifndef __MACH_GPMI_H
+
+#include <linux/mtd/partitions.h>
+#include <mach/regs-gpmi.h>
+
+struct gpmi_platform_data {
+	void *pins;
+	int nr_parts;
+	struct mtd_partition *parts;
+	const char *part_types[];
+};
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
new file mode 100644
index 00000000000..47b8978405b
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * This file contains the hardware definitions of the Freescale STMP3XXX
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 /* VA of IO  */
+#define IO_SIZE			0x00100000                 /* How much? */
+#define IO_START		0x80000000                 /* PA of IO  */
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h
new file mode 100644
index 00000000000..d08b1b7f3d1
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/io.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) 	__typesafe_io(a)
+#define __mem_pci(a)	(a)
+#define __mem_isa(a)	(a)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h
new file mode 100644
index 00000000000..7b875a07a1a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x40000000)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/mmc.h b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
new file mode 100644
index 00000000000..ba81e154376
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
@@ -0,0 +1,14 @@
+#ifndef _MACH_MMC_H
+#define _MACH_MMC_H
+
+#include <mach/regs-ssp.h>
+
+struct stmp3xxxmmc_platform_data {
+	int (*get_wp)(void);
+	unsigned long (*setclock)(void __iomem *base, unsigned long);
+	void (*cmd_pullup)(int);
+	int  (*hw_init)(void);
+	void (*hw_release)(void);
+};
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
new file mode 100644
index 00000000000..cc5af82279a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
@@ -0,0 +1,157 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __PINMUX_H
+#define __PINMUX_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <asm-generic/gpio.h>
+
+/* Pin definitions */
+#include "pins.h"
+#include <mach/pins.h>
+
+/*
+ * Each pin may be routed up to four different HW interfaces
+ * including GPIO
+ */
+enum pin_fun {
+	PIN_FUN1 = 0,
+	PIN_FUN2,
+	PIN_FUN3,
+	PIN_GPIO,
+};
+
+/*
+ * Each pin may have different output drive strength in range from
+ * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths.
+ */
+enum pin_strength {
+	PIN_4MA = 0,
+	PIN_8MA,
+	PIN_12MA,
+	PIN_16MA,
+	PIN_20MA,
+};
+
+/*
+ * Each pin can be programmed for 1.8V or 3.3V
+ */
+enum pin_voltage {
+	PIN_1_8V = 0,
+	PIN_3_3V,
+};
+
+/*
+ * Structure to define a group of pins and their parameters
+ */
+struct pin_desc {
+	unsigned id;
+	enum pin_fun fun;
+	enum pin_strength strength;
+	enum pin_voltage voltage;
+	unsigned pullup:1;
+};
+
+struct pin_group {
+	struct pin_desc *pins;
+	int nr_pins;
+};
+
+/* Set pin drive strength */
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+			   const char *label);
+
+/* Set pin voltage */
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+			   const char *label);
+
+/* Enable pull-up resistor for a pin */
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label);
+
+/*
+ * Request a pin ownership, only one module (identified by @label)
+ * may own a pin.
+ */
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label);
+
+/* Release pin */
+void stmp3xxx_release_pin(unsigned id, const char *label);
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun);
+
+/*
+ * Each bank is associated with a number of registers to control
+ * pin function, drive strength, voltage and pull-up reigster. The
+ * number of registers of a given type depends on the number of bits
+ * describin particular pin.
+ */
+#define HW_MUXSEL_NUM		2	/* registers per bank */
+#define HW_MUXSEL_PIN_LEN	2	/* bits per pin */
+#define HW_MUXSEL_PIN_NUM	16	/* pins per register */
+#define HW_MUXSEL_PINFUN_MASK	0x3	/* pin function mask */
+#define HW_MUXSEL_PINFUN_NUM	4	/* four options for a pin */
+
+#define HW_DRIVE_NUM		4	/* registers per bank */
+#define HW_DRIVE_PIN_LEN	4	/* bits per pin */
+#define HW_DRIVE_PIN_NUM	8	/* pins per register */
+#define HW_DRIVE_PINDRV_MASK	0x3	/* pin strength mask - 2 bits */
+#define HW_DRIVE_PINDRV_NUM	5	/* five possible strength values */
+#define HW_DRIVE_PINV_MASK	0x4	/* pin voltage mask - 1 bit */
+
+
+struct stmp3xxx_pinmux_bank {
+	struct gpio_chip chip;
+
+	/* Pins allocation map */
+	unsigned long pin_map;
+
+	/* Pin owner names */
+	const char *pin_labels[32];
+
+	/* Bank registers */
+	void __iomem *hw_muxsel[HW_MUXSEL_NUM];
+	void __iomem *hw_drive[HW_DRIVE_NUM];
+	void __iomem *hw_pull;
+
+	void __iomem *pin2irq,
+		*irqlevel,
+		*irqpolarity,
+		*irqen,
+		*irqstat;
+
+	/* HW MUXSEL register function bit values */
+	u8 functions[HW_MUXSEL_PINFUN_NUM];
+
+	/*
+	 * HW DRIVE register strength bit values:
+	 * 0xff - requested strength is not supported for this bank
+	 */
+	u8 strengths[HW_DRIVE_PINDRV_NUM];
+
+	/* GPIO things */
+	void __iomem *hw_gpio_in,
+		     *hw_gpio_out,
+		     *hw_gpio_doe;
+	int irq, virq;
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start);
+
+#endif /* __PINMUX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h
new file mode 100644
index 00000000000..c573318e1ca
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pins.h
@@ -0,0 +1,30 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PINS_H
+#define __ASM_PLAT_PINS_H
+
+#define STMP3XXX_PINID(bank, pin)	(bank * 32 + pin)
+#define STMP3XXX_PINID_TO_BANK(pinid)	(pinid / 32)
+#define STMP3XXX_PINID_TO_PINNUM(pinid)	(pinid % 32)
+
+/*
+ * Special invalid pin identificator to show a pin doesn't exist
+ */
+#define PINID_NO_PIN	STMP3XXX_PINID(0xFF, 0xFF)
+
+#endif /* __ASM_PLAT_PINS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h
new file mode 100644
index 00000000000..7007ddaa91e
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/platform.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PLATFORM_H
+#define __ASM_PLAT_PLATFORM_H
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+#include <asm/sizes.h>
+
+/* Virtual address where registers are mapped */
+#define STMP3XXX_REGS_PHBASE	0x80000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_REGS_BASE	0xF0000000
+#else
+#define STMP3XXX_REGS_BASE	(void __iomem *)0xF0000000
+#endif
+#define STMP3XXX_REGS_SIZE	SZ_1M
+
+/* Virtual address where OCRAM is mapped */
+#define STMP3XXX_OCRAM_PHBASE	0x00000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_OCRAM_BASE	0xf1000000
+#else
+#define STMP3XXX_OCRAM_BASE	(void __iomem *)0xf1000000
+#endif
+#define STMP3XXX_OCRAM_SIZE	(32 * SZ_1K)
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define IRQ_PRIORITY_REG_RD	HW_ICOLL_PRIORITYn_RD
+#define IRQ_PRIORITY_REG_WR	HW_ICOLL_PRIORITYn_WR
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define IRQ_PRIORITY_REG_RD	HW_ICOLL_INTERRUPTn_RD
+#define IRQ_PRIORITY_REG_WR	HW_ICOLL_INTERRUPTn_WR
+#endif
+
+#define HW_STMP3XXX_SET		0x04
+#define HW_STMP3XXX_CLR		0x08
+#define HW_STMP3XXX_TOG		0x0c
+
+#ifndef __ASSEMBLER__
+static inline void stmp3xxx_clearl(u32 v, void __iomem *r)
+{
+	__raw_writel(v, r + HW_STMP3XXX_CLR);
+}
+
+static inline void stmp3xxx_setl(u32 v, void __iomem *r)
+{
+	__raw_writel(v, r + HW_STMP3XXX_SET);
+}
+#endif
+
+#define BF(value, field) (((value) << BP_##field) & BM_##field)
+
+#endif /* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
new file mode 100644
index 00000000000..2e300feaa4c
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
@@ -0,0 +1,54 @@
+/*
+ * Freescale STMP37XX/STMP378X core structure and function declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_H
+#define __ASM_PLAT_STMP3XXX_H
+
+#include <linux/irq.h>
+
+extern struct sys_timer stmp3xxx_timer;
+
+void stmp3xxx_init_irq(struct irq_chip *chip);
+void stmp3xxx_init(void);
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable);
+extern struct platform_device stmp3xxx_dbguart,
+			      stmp3xxx_appuart,
+			      stmp3xxx_watchdog,
+			      stmp3xxx_touchscreen,
+			      stmp3xxx_keyboard,
+			      stmp3xxx_gpmi,
+			      stmp3xxx_mmc,
+			      stmp3xxx_udc,
+			      stmp3xxx_ehci,
+			      stmp3xxx_rtc,
+			      stmp3xxx_spi1,
+			      stmp3xxx_spi2,
+			      stmp3xxx_backlight,
+			      stmp3xxx_rotdec,
+			      stmp3xxx_dcp,
+			      stmp3xxx_dcp_bootstream,
+			      stmp3xxx_persistent,
+			      stmp3xxx_framebuffer,
+			      stmp3xxx_battery;
+int stmp3xxx_ssp1_device_register(void);
+int stmp3xxx_ssp2_device_register(void);
+
+struct pin_group;
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label);
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label);
+
+#endif /* __ASM_PLAT_STMP3XXX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h
new file mode 100644
index 00000000000..28a98888931
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+#include <mach/regs-power.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* Set BATTCHRG to default value */
+	__raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE);
+
+	/* Set MINPWR to default value   */
+	__raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR);
+
+	/* Reset digital side of chip (but not power or RTC) */
+	__raw_writel(BM_CLKCTRL_RESET_DIG,
+			REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET);
+
+	/* Should not return */
+}
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h
new file mode 100644
index 00000000000..3373985d7a8
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * System time clock is sourced from the 32k clock
+ */
+#define CLOCK_TICK_RATE		(32768)
diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
new file mode 100644
index 00000000000..f79f5ee56cd
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+/*
+ * Register includes are for when the MMU enabled; we need to define our
+ * own stuff here for pre-MMU use
+ */
+#define UARTDBG_BASE		0x80070000
+#define UART(c)			(((volatile unsigned *)UARTDBG_BASE)[c])
+
+/*
+ * This does not append a newline
+ */
+static void putc(char c)
+{
+	/* Wait for TX fifo empty */
+	while ((UART(6) & (1<<7)) == 0)
+		continue;
+
+	/* Write byte */
+	UART(0) = c;
+
+	/* Wait for last bit to exit the UART */
+	while (UART(6) & (1<<3))
+		continue;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..541b880c186
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define VMALLOC_END       (0xF0000000)
diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c
new file mode 100644
index 00000000000..20de4e0401e
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/irq.c
@@ -0,0 +1,51 @@
+/*
+ * Freescale STMP37XX/STMP378X common interrupt handling code
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+
+void __init stmp3xxx_init_irq(struct irq_chip *chip)
+{
+	unsigned int i, lv;
+
+	/* Reset the interrupt controller */
+	stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true);
+
+	/* Disable all interrupts initially */
+	for (i = 0; i < NR_REAL_IRQS; i++) {
+		chip->mask(i);
+		set_irq_chip(i, chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Ensure vector is cleared */
+	for (lv = 0; lv < 4; lv++)
+		__raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+	__raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+	/* Barrier */
+	(void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
new file mode 100644
index 00000000000..d4120038220
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -0,0 +1,552 @@
+/*
+ * Freescale STMP378X/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sysdev.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/regs-pinctrl.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+
+#define NR_BANKS ARRAY_SIZE(pinmux_banks)
+static struct stmp3xxx_pinmux_bank pinmux_banks[] = {
+	[0] = {
+		.hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0,
+		.irq = IRQ_GPIO0,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0,
+	},
+	[1] = {
+		.hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1,
+		.irq = IRQ_GPIO1,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1,
+	},
+	[2] = {
+	       .hw_muxsel = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4,
+			REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5,
+		},
+		.hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11,
+		},
+		.hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2,
+		.functions = { 0x0, 0x1, 0x2, 0x3 },
+		.strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 },
+
+		.hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2,
+		.hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2,
+		.hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2,
+		.irq = IRQ_GPIO2,
+
+		.pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2,
+		.irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2,
+		.irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2,
+		.irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2,
+		.irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2,
+	},
+	[3] = {
+	       .hw_muxsel = {
+		       REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6,
+		       REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7,
+	       },
+	       .hw_drive = {
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13,
+			REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14,
+			NULL,
+	       },
+	       .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3,
+	       .functions = {0x0, 0x1, 0x2, 0x3},
+	       .strengths = {0x0, 0x1, 0x2, 0x3, 0xff},
+	},
+};
+
+static inline struct stmp3xxx_pinmux_bank *
+stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin)
+{
+	unsigned b, p;
+
+	b = STMP3XXX_PINID_TO_BANK(id);
+	p = STMP3XXX_PINID_TO_PINNUM(id);
+	BUG_ON(b >= NR_BANKS);
+	if (bank)
+		*bank = b;
+	if (pin)
+		*pin = p;
+	return &pinmux_banks[b];
+}
+
+/* Check if requested pin is owned by caller */
+static int stmp3xxx_check_pin(unsigned id, const char *label)
+{
+	unsigned pin;
+	struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin);
+
+	if (!test_bit(pin, &pm->pin_map)) {
+		printk(KERN_WARNING
+		       "%s: Accessing free pin %x, caller %s\n",
+		       __func__, id, label);
+
+		return -EINVAL;
+	}
+
+	if (label && pm->pin_labels[pin] &&
+	    strcmp(label, pm->pin_labels[pin])) {
+		printk(KERN_WARNING
+		       "%s: Wrong pin owner %x, caller %s owner %s\n",
+		       __func__, id, label, pm->pin_labels[pin]);
+
+		return -EINVAL;
+	}
+	return 0;
+}
+
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+		const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwdrive;
+	u32 shift, val;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label,
+		 bank, pin, strength);
+
+	hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+	shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+	val = pbank->strengths[strength];
+	if (val == 0xff) {
+		printk(KERN_WARNING
+		       "%s: strength is not supported for bank %d, caller %s",
+		       __func__, bank, label);
+		return;
+	}
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: writing 0x%x to 0x%p register\n", __func__,
+			val << shift, hwdrive);
+	stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive);
+	stmp3xxx_setl(val << shift, hwdrive);
+}
+
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+			  const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwdrive;
+	u32 shift;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label,
+		 bank, pin, voltage);
+
+	hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+	shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+			__func__, HW_DRIVE_PINV_MASK << shift, hwdrive);
+	if (voltage == PIN_1_8V)
+		stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+	else
+		stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+}
+
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwpull;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label,
+		 bank, pin, enable);
+
+	hwpull = pbank->hw_pull;
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+			__func__, 1 << pin, hwpull);
+	if (enable)
+		stmp3xxx_setl(1 << pin, hwpull);
+	else
+		stmp3xxx_clearl(1 << pin, hwpull);
+}
+
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	u32 bank, pin;
+	int ret = 0;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label,
+		 bank, pin, fun);
+
+	if (test_bit(pin, &pbank->pin_map)) {
+		printk(KERN_WARNING
+		       "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n",
+		       __func__, bank, pin, label, pbank->pin_labels[pin]);
+		return -EBUSY;
+	}
+
+	set_bit(pin, &pbank->pin_map);
+	pbank->pin_labels[pin] = label;
+
+	stmp3xxx_set_pin_type(id, fun);
+
+	return ret;
+}
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	void __iomem *hwmux;
+	u32 shift, val;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+
+	hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM];
+	shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+
+	val = pbank->functions[fun];
+	shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+	pr_debug("%s: writing 0x%x to 0x%p register\n",
+			__func__, val << shift, hwmux);
+	stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux);
+	stmp3xxx_setl(val << shift, hwmux);
+}
+
+void stmp3xxx_release_pin(unsigned id, const char *label)
+{
+	struct stmp3xxx_pinmux_bank *pbank;
+	u32 bank, pin;
+
+	pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+	pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin);
+
+	if (stmp3xxx_check_pin(id, label))
+		return;
+
+	clear_bit(pin, &pbank->pin_map);
+	pbank->pin_labels[pin] = NULL;
+}
+
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label)
+{
+	struct pin_desc *pin;
+	int p;
+	int err = 0;
+
+	/* Allocate and configure pins */
+	for (p = 0; p < pin_group->nr_pins; p++) {
+		pr_debug("%s: #%d\n", __func__, p);
+		pin = &pin_group->pins[p];
+
+		err = stmp3xxx_request_pin(pin->id, pin->fun, label);
+		if (err)
+			goto out_err;
+
+		stmp3xxx_pin_strength(pin->id, pin->strength, label);
+		stmp3xxx_pin_voltage(pin->id, pin->voltage, label);
+		stmp3xxx_pin_pullup(pin->id, pin->pullup, label);
+	}
+
+	return 0;
+
+out_err:
+	/* Release allocated pins in case of error */
+	while (--p >= 0) {
+		pr_debug("%s: releasing #%d\n", __func__, p);
+		stmp3xxx_release_pin(pin_group->pins[p].id, label);
+	}
+	return err;
+}
+EXPORT_SYMBOL(stmp3xxx_request_pin_group);
+
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label)
+{
+	struct pin_desc *pin;
+	int p;
+
+	for (p = 0; p < pin_group->nr_pins; p++) {
+		pin = &pin_group->pins[p];
+		stmp3xxx_release_pin(pin->id, label);
+	}
+}
+EXPORT_SYMBOL(stmp3xxx_release_pin_group);
+
+static int stmp3xxx_irq_to_gpio(int irq,
+	struct stmp3xxx_pinmux_bank **bank, unsigned *gpio)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+
+	for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++)
+		if (pm->virq <= irq && irq < pm->virq + 32) {
+			*bank = pm;
+			*gpio = irq - pm->virq;
+			return 0;
+		}
+	return -ENOENT;
+}
+
+static int stmp3xxx_set_irqtype(unsigned irq, unsigned type)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+	int l, p;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		l = 0; p = 1; break;
+	case IRQ_TYPE_EDGE_FALLING:
+		l = 0; p = 0; break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		l = 1; p = 1; break;
+	case IRQ_TYPE_LEVEL_LOW:
+		l = 1; p = 0; break;
+	default:
+		pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n",
+				__func__, type);
+		return -ENXIO;
+	}
+
+	if (l)
+		stmp3xxx_setl(1 << gpio, pm->irqlevel);
+	else
+		stmp3xxx_clearl(1 << gpio, pm->irqlevel);
+	if (p)
+		stmp3xxx_setl(1 << gpio, pm->irqpolarity);
+	else
+		stmp3xxx_clearl(1 << gpio, pm->irqpolarity);
+	return 0;
+}
+
+static void stmp3xxx_pin_ack_irq(unsigned irq)
+{
+	u32 stat;
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stat = __raw_readl(pm->irqstat) & (1 << gpio);
+	stmp3xxx_clearl(stat, pm->irqstat);
+}
+
+static void stmp3xxx_pin_mask_irq(unsigned irq)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stmp3xxx_clearl(1 << gpio, pm->irqen);
+	stmp3xxx_clearl(1 << gpio, pm->pin2irq);
+}
+
+static void stmp3xxx_pin_unmask_irq(unsigned irq)
+{
+	struct stmp3xxx_pinmux_bank *pm;
+	unsigned gpio;
+
+	stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+	stmp3xxx_setl(1 << gpio, pm->irqen);
+	stmp3xxx_setl(1 << gpio, pm->pin2irq);
+}
+
+static inline
+struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip)
+{
+	return container_of(chip, struct stmp3xxx_pinmux_bank, chip);
+}
+
+static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+	return pm->virq + offset;
+}
+
+static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+	unsigned v;
+
+	v = __raw_readl(pm->hw_gpio_in) & (1 << offset);
+	return v ? 1 : 0;
+}
+
+static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	if (v)
+		stmp3xxx_setl(1 << offset, pm->hw_gpio_out);
+	else
+		stmp3xxx_clearl(1 << offset, pm->hw_gpio_out);
+}
+
+static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	stmp3xxx_setl(1 << offset, pm->hw_gpio_doe);
+	stmp3xxx_gpio_set(chip, offset, v);
+	return 0;
+}
+
+static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+	stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe);
+	return 0;
+}
+
+static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio");
+}
+
+static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	stmp3xxx_release_pin(chip->base + offset, "gpio");
+}
+
+static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc)
+{
+	struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq);
+	int gpio_irq = pm->virq;
+	u32 stat = __raw_readl(pm->irqstat);
+
+	while (stat) {
+		if (stat & 1)
+			irq_desc[gpio_irq].handle_irq(gpio_irq,
+				&irq_desc[gpio_irq]);
+		gpio_irq++;
+		stat >>= 1;
+	}
+}
+
+static struct irq_chip gpio_irq_chip = {
+	.ack	= stmp3xxx_pin_ack_irq,
+	.mask	= stmp3xxx_pin_mask_irq,
+	.unmask	= stmp3xxx_pin_unmask_irq,
+	.set_type = stmp3xxx_set_irqtype,
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start)
+{
+	int b, r = 0;
+	struct stmp3xxx_pinmux_bank *pm;
+	int virq;
+
+	for (b = 0; b < 3; b++) {
+		/* only banks 0,1,2 are allowed to GPIO */
+		pm = pinmux_banks + b;
+		pm->chip.base = 32 * b;
+		pm->chip.ngpio = 32;
+		pm->chip.owner = THIS_MODULE;
+		pm->chip.can_sleep = 1;
+		pm->chip.exported = 1;
+		pm->chip.to_irq = stmp3xxx_gpio_to_irq;
+		pm->chip.direction_input = stmp3xxx_gpio_input;
+		pm->chip.direction_output = stmp3xxx_gpio_output;
+		pm->chip.get = stmp3xxx_gpio_get;
+		pm->chip.set = stmp3xxx_gpio_set;
+		pm->chip.request = stmp3xxx_gpio_request;
+		pm->chip.free = stmp3xxx_gpio_free;
+		pm->virq = virtual_irq_start + b * 32;
+
+		for (virq = pm->virq; virq < pm->virq; virq++) {
+			gpio_irq_chip.mask(virq);
+			set_irq_chip(virq, &gpio_irq_chip);
+			set_irq_handler(virq, handle_level_irq);
+			set_irq_flags(virq, IRQF_VALID);
+		}
+		r = gpiochip_add(&pm->chip);
+		if (r < 0)
+			break;
+		set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq);
+		set_irq_data(pm->irq, pm);
+	}
+	return r;
+}
+
+MODULE_AUTHOR("Vladislav Buzov");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c
new file mode 100644
index 00000000000..063c7bc0e74
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/timer.c
@@ -0,0 +1,189 @@
+/*
+ * System timer for Freescale STMP37XX/STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/time.h>
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-timrot.h>
+
+static irqreturn_t
+stmp3xxx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* timer 0 */
+	if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) &
+			BM_TIMROT_TIMCTRLn_IRQ) {
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+		c->event_handler(c);
+	}
+
+	/* timer 1 */
+	else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1)
+			& BM_TIMROT_TIMCTRLn_IRQ) {
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+		stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+				REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+		__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static cycle_t stmp3xxx_clock_read(struct clocksource *cs)
+{
+	return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1)
+				& 0xFFFF0000) >> 16);
+}
+
+static int
+stmp3xxx_timrot_set_next_event(unsigned long delta,
+		struct clock_event_device *dev)
+{
+	/* reload the timer */
+	__raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	return 0;
+}
+
+static void
+stmp3xxx_timrot_set_mode(enum clock_event_mode mode,
+		struct clock_event_device *dev)
+{
+}
+
+static struct clock_event_device ckevt_timrot = {
+	.name		= "timrot",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= stmp3xxx_timrot_set_next_event,
+	.set_mode	= stmp3xxx_timrot_set_mode,
+};
+
+static struct clocksource cksrc_stmp3xxx = {
+	.name           = "cksrc_stmp3xxx",
+	.rating         = 250,
+	.read           = stmp3xxx_clock_read,
+	.mask           = CLOCKSOURCE_MASK(16),
+	.shift          = 10,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct irqaction stmp3xxx_timer_irq = {
+	.name		= "stmp3xxx_timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= stmp3xxx_timer_interrupt,
+	.dev_id		= &ckevt_timrot,
+};
+
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init stmp3xxx_init_timer(void)
+{
+	cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE,
+				cksrc_stmp3xxx.shift);
+	ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+				ckevt_timrot.shift);
+	ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
+	ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot);
+	ckevt_timrot.cpumask = cpumask_of(0);
+
+	stmp3xxx_reset_block(REGS_TIMROT_BASE, false);
+
+	/* clear two timers */
+	__raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+	/* configure them */
+	__raw_writel(
+		(8 << BP_TIMROT_TIMCTRLn_SELECT) |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	__raw_writel(
+		(8 << BP_TIMROT_TIMCTRLn_SELECT) |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+
+	__raw_writel(CLOCK_TICK_RATE / HZ - 1,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+	setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
+
+	clocksource_register(&cksrc_stmp3xxx);
+	clockevents_register_device(&ckevt_timrot);
+}
+
+#ifdef CONFIG_PM
+
+void stmp3xxx_suspend_timer(void)
+{
+	stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE,
+			REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+}
+
+void stmp3xxx_resume_timer(void)
+{
+	stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE,
+			REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+	__raw_writel(
+		8 << BP_TIMROT_TIMCTRLn_SELECT |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+	__raw_writel(
+		8 << BP_TIMROT_TIMCTRLn_SELECT |  /* 32 kHz */
+		BM_TIMROT_TIMCTRLn_RELOAD |
+		BM_TIMROT_TIMCTRLn_UPDATE |
+		BM_TIMROT_TIMCTRLn_IRQ_EN,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+	__raw_writel(CLOCK_TICK_RATE / HZ - 1,
+			REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+	__raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+}
+
+#else
+
+#define stmp3xxx_suspend_timer	NULL
+#define	stmp3xxx_resume_timer	NULL
+
+#endif	/* CONFIG_PM */
+
+struct sys_timer stmp3xxx_timer = {
+	.init		= stmp3xxx_init_timer,
+	.suspend	= stmp3xxx_suspend_timer,
+	.resume		= stmp3xxx_resume_timer,
+};
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 83c4e384b16..1aeae38725d 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -100,6 +100,7 @@ ENTRY(vfp_support_entry)
 	beq	no_old_VFP_process
 	VFPFSTMIA r4, r5		@ save the working registers
 	VFPFMRX	r5, FPSCR		@ current status
+#ifndef CONFIG_CPU_FEROCEON
 	tst	r1, #FPEXC_EX		@ is there additional state to save?
 	beq	1f
 	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
@@ -107,6 +108,7 @@ ENTRY(vfp_support_entry)
 	beq	1f
 	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
 1:
+#endif
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
 					@ and point r4 at the word at the
 					@ start of the register dump
@@ -119,6 +121,7 @@ no_old_VFP_process:
 	VFPFLDMIA r10, r5		@ reload the working registers while
 					@ FPEXC is in a safe state
 	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
+#ifndef CONFIG_CPU_FEROCEON
 	tst	r1, #FPEXC_EX		@ is there additional state to restore?
 	beq	1f
 	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
@@ -126,6 +129,7 @@ no_old_VFP_process:
 	beq	1f
 	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
 1:
+#endif
 	VFPFMXR	FPSCR, r5		@ restore status
 
 check_for_exception:
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 01599c4ef72..2d7423af119 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -253,12 +253,14 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 	}
 
 	if (fpexc & FPEXC_EX) {
+#ifndef CONFIG_CPU_FEROCEON
 		/*
 		 * Asynchronous exception. The instruction is read from FPINST
 		 * and the interrupted instruction has to be restarted.
 		 */
 		trigger = fmrx(FPINST);
 		regs->ARM_pc -= 4;
+#endif
 	} else if (!(fpexc & FPEXC_DEX)) {
 		/*
 		 * Illegal combination of bits. It can be caused by an
diff --git a/arch/avr32/kernel/init_task.c b/arch/avr32/kernel/init_task.c
index 993d56ee3cf..57ec9f2dcd9 100644
--- a/arch/avr32/kernel/init_task.c
+++ b/arch/avr32/kernel/init_task.c
@@ -15,10 +15,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure. Must be aligned on an 8192-byte boundary.
  */
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 803d7be0938..27227561bad 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -212,7 +212,7 @@ out:
 	return err;
 }
 
-static inline void restart_syscall(struct pt_regs *regs)
+static inline void setup_syscall_restart(struct pt_regs *regs)
 {
 	if (regs->r12 == -ERESTART_RESTARTBLOCK)
 		regs->r8 = __NR_restart_syscall;
@@ -296,7 +296,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall)
 			}
 			/* fall through */
 		case -ERESTARTNOINTR:
-			restart_syscall(regs);
+			setup_syscall_restart(regs);
 		}
 	}
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index c56fd3eb7c1..8ea0d942cde 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -6,59 +6,65 @@
 mainmenu "Blackfin Kernel Configuration"
 
 config MMU
-	bool
-	default n
+	def_bool n
 
 config FPU
-	bool
-	default n
+	def_bool n
 
 config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
+	def_bool y
 
 config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
+	def_bool n
 
 config BLACKFIN
-	bool
-	default y
+	def_bool y
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER
 	select HAVE_IDE
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
 config ZONE_DMA
-	bool
-	default y
+	def_bool y
 
 config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HWEIGHT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HARDIRQS
-	bool
-	default y
+	def_bool y
 
 config GENERIC_IRQ_PROBE
-	bool
-	default y
+	def_bool y
 
 config GENERIC_GPIO
-	bool
-	default y
+	def_bool y
 
 config FORCE_MAX_ZONEORDER
 	int
 	default "14"
 
 config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
 
 source "init/Kconfig"
 
@@ -408,12 +414,12 @@ comment "Clock/PLL Setup"
 
 config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
+	default "10000000" if BFIN532_IP0X
 	default "11059200" if BFIN533_STAMP
+	default "24576000" if PNAV10
+	default "25000000" # most people use this
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
 	default "30000000" if BFIN561_EZKIT
-	default "24576000" if PNAV10
-	default "10000000" if BFIN532_IP0X
 	help
 	  The frequency of CLKIN crystal oscillator on the board in Hz.
 	  Warning: This value should match the crystal on the board. Otherwise,
@@ -885,7 +891,7 @@ config BFIN_GPTIMERS
 	  are unsure, say N.
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called gptimers.ko.
+	  will be called gptimers.
 
 choice
 	prompt "Uncached DMA region"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index d54c8283825..6f9533c3d75 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -137,7 +137,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage
+BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -150,7 +150,10 @@ install:
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
 
 define archhelp
-  echo  '* vmImage         - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)'
+  echo  '* vmImage         - Alias to selected kernel format (vmImage.gz by default)'
+  echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
+  echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
+  echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
   echo  '  install         - Install kernel using'
   echo  '                     (your) ~/bin/$(CROSS_COMPILE)installkernel or'
   echo  '                     (distribution) PATH: $(CROSS_COMPILE)installkernel or'
diff --git a/arch/blackfin/boot/.gitignore b/arch/blackfin/boot/.gitignore
index 3ae03994b88..229e5080867 100644
--- a/arch/blackfin/boot/.gitignore
+++ b/arch/blackfin/boot/.gitignore
@@ -1 +1,2 @@
-+vmImage
+vmImage*
+vmlinux*
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index e028d13481a..3ab6f23561d 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -8,24 +8,41 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage
-extra-y += vmlinux.bin vmlinux.gz
+targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-                   -C gzip -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+                   -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
                    -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
                    -d $< $@
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-$(obj)/vmImage: $(obj)/vmlinux.gz
-	$(call if_changed,uimage)
-	@$(kecho) 'Kernel: $@ is ready'
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+$(obj)/vmImage: $(obj)/vmImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
 
 install:
 	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h
index 7bbf44e4ddf..b1d92f13ef9 100644
--- a/arch/blackfin/include/asm/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
@@ -90,7 +90,7 @@ static inline int atomic_test_mask(int mask, atomic_t *v)
 
 static inline void atomic_add(int i, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter += i;
@@ -99,7 +99,7 @@ static inline void atomic_add(int i, atomic_t *v)
 
 static inline void atomic_sub(int i, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter -= i;
@@ -110,7 +110,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	int __temp = 0;
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter += i;
@@ -124,7 +124,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	int __temp = 0;
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter -= i;
@@ -136,7 +136,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 static inline void atomic_inc(volatile atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter++;
@@ -145,7 +145,7 @@ static inline void atomic_inc(volatile atomic_t *v)
 
 static inline void atomic_dec(volatile atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter--;
@@ -154,7 +154,7 @@ static inline void atomic_dec(volatile atomic_t *v)
 
 static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter &= ~mask;
@@ -163,7 +163,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 
 static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter |= mask;
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index daffc0684e7..e39277ea43e 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -31,7 +31,7 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm-generic/sections.h>
+#include <asm/sections.h>
 #include <asm/ptrace.h>
 #include <asm/user.h>
 #include <linux/linkage.h>
@@ -99,15 +99,6 @@ extern const char bfin_board_name[];
 extern unsigned long bfin_sic_iwr[];
 extern unsigned vr_wakeup;
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
-extern unsigned long _ramstart, _ramend, _rambase;
-extern unsigned long memory_start, memory_end, physical_mem_end;
-extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
-	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
-	_ebss_l2[], _l2_lma_start[];
-
-/* only used when MTD_UCLINUX */
-extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
 
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 extern void cache_grab_lock(int way);
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 21b036eadab..75fee2f7d9f 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -109,7 +109,8 @@ static inline void clear_bit(int nr, volatile unsigned long *addr)
 
 static inline void change_bit(int nr, volatile unsigned long *addr)
 {
-	int mask, flags;
+	int mask;
+	unsigned long flags;
 	unsigned long *ADDR = (unsigned long *)addr;
 
 	ADDR += nr >> 5;
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 6d3e11b1fc5..655e49540e4 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -2,13 +2,58 @@
 #define _BLACKFIN_BUG_H
 
 #ifdef CONFIG_BUG
-#define HAVE_ARCH_BUG
 
-#define BUG() do { \
-	dump_bfin_trace_buffer(); \
-	printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-	panic("BUG!"); \
-} while (0)
+#define BFIN_BUG_OPCODE	0xefcd
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.long	%1\n"					\
+		"	.short	%2\n"					\
+		"	.short	%3\n"					\
+		"	.org	2b + %4\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(__FILE__),			\
+		  "i"(__LINE__), "i"(flags),				\
+		  "i"(sizeof(struct bug_entry)))
+
+#else
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.short	%1\n"					\
+		"	.org	2b + %2\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(flags),			\
+		  "i"(sizeof(struct bug_entry)))
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()								\
+	do {								\
+		_BUG_OR_WARN(0);					\
+		for (;;);						\
+	} while (0)
+
+#define WARN_ON(condition)							\
+	({								\
+		int __ret_warn_on = !!(condition);			\
+		if (unlikely(__ret_warn_on))				\
+			_BUG_OR_WARN(BUGFLAG_WARNING);			\
+		unlikely(__ret_warn_on);				\
+	})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
 
 #endif
 
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 86637814cf2..2ef669ed922 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -34,9 +34,13 @@
 #define L1_CACHE_SHIFT_MAX	5
 
 #if defined(CONFIG_SMP) && \
-    !defined(CONFIG_BFIN_CACHE_COHERENT) && \
-    defined(CONFIG_BFIN_DCACHE)
-#define __ARCH_SYNC_CORE_DCACHE
+    !defined(CONFIG_BFIN_CACHE_COHERENT)
+# if defined(CONFIG_BFIN_ICACHE)
+# define __ARCH_SYNC_CORE_ICACHE
+# endif
+# if defined(CONFIG_BFIN_DCACHE)
+# define __ARCH_SYNC_CORE_DCACHE
+# endif
 #ifndef __ASSEMBLY__
 asmlinkage void __raw_smp_mark_barrier_asm(void);
 asmlinkage void __raw_smp_check_barrier_asm(void);
@@ -51,6 +55,7 @@ static inline void smp_check_barrier(void)
 }
 
 void resync_core_dcache(void);
+void resync_core_icache(void);
 #endif
 #endif
 
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 94697f0f6f4..5c17dee53b5 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -37,6 +37,7 @@ extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned lo
 extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dflush_page(void *page);
 extern void blackfin_invalidate_entire_dcache(void);
+extern void blackfin_invalidate_entire_icache(void);
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -97,7 +98,7 @@ do { memcpy(dst, src, len);						\
 extern unsigned long reserved_mem_dcache_on;
 extern unsigned long reserved_mem_icache_on;
 
-static inline int bfin_addr_dcachable(unsigned long addr)
+static inline int bfin_addr_dcacheable(unsigned long addr)
 {
 #ifdef CONFIG_BFIN_DCACHE
 	if (addr < (_ramend - DMA_UNCACHED_REGION))
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index c2594ef877f..565b8136855 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -34,6 +34,7 @@ struct blackfin_cpudata {
 	unsigned int dmemctl;
 	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
+	unsigned long icache_invld_count;
 };
 
 DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 40a8c178f10..8643680f0f7 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -1 +1,13 @@
-/* empty */
+/*
+ * Blackfin ftrace code
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_FTRACE_H__
+#define __ASM_BFIN_FTRACE_H__
+
+#define MCOUNT_INSN_SIZE	8 /* sizeof mcount call: LINK + CALL */
+
+#endif
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 51d0bf5e289..bbe1c3726b6 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,10 +35,10 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.9-01"
+#define IPIPE_ARCH_STRING     "1.10-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    9
-#define IPIPE_PATCH_NUMBER    1
+#define IPIPE_MINOR_NUMBER    10
+#define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
 #error "I-pipe/blackfin: SMP not implemented"
@@ -54,10 +54,11 @@ do {						\
 
 #define task_hijacked(p)						\
 	({								\
-		int __x__ = ipipe_current_domain != ipipe_root_domain;	\
-		/* We would need to clear the SYNC flag for the root domain */ \
-		/* over the current processor in SMP mode. */		\
-		local_irq_enable_hw(); __x__;				\
+		int __x__ = __ipipe_root_domain_p;			\
+		__clear_bit(IPIPE_SYNC_FLAG, &ipipe_root_cpudom_var(status)); \
+		if (__x__)						\
+			local_irq_enable_hw();				\
+		!__x__;							\
 	})
 
 struct ipipe_domain;
@@ -179,23 +180,24 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
-		if (ipd == ipipe_root_domain) {				\
+		if (!__ipipe_pipeline_head_p(ipd))			\
 			local_irq_enable_hw();				\
-			if (ipipe_virtual_irq_p(irq))			\
+		if (ipd == ipipe_root_domain) {				\
+			if (unlikely(ipipe_virtual_irq_p(irq))) {	\
+				irq_enter();				\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-			else						\
+				irq_exit();				\
+			} else 						\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
-			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
-			local_irq_enable_nohead(ipd);			\
 			ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
 			/* Attempt to exit the outer interrupt level before \
 			 * starting the deferred IRQ processing. */	\
-			local_irq_disable_nohead(ipd);			\
 			__ipipe_run_irqtail();				\
 			__set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 		}							\
+		local_irq_disable_hw();					\
 	} while (0)
 
 #define __ipipe_syscall_watched_p(p, sc)	\
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 7645e85a5f6..400bdd52ce8 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -17,270 +17,17 @@
 #ifndef _BFIN_IRQ_H_
 #define _BFIN_IRQ_H_
 
-/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
-#include <mach/irq.h>
-#include <asm/pda.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_SMP
-/* Forward decl needed due to cdef inter dependencies */
-static inline uint32_t __pure bfin_dspid(void);
-# define blackfin_core_id() (bfin_dspid() & 0xff)
-# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
-#else
-extern unsigned long bfin_irq_flags;
-#endif
-
-#ifdef CONFIG_IPIPE
-
-#include <linux/ipipe_trace.h>
+#include <linux/irqflags.h>
 
-void __ipipe_unstall_root(void);
-
-void __ipipe_restore_root(unsigned long flags);
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __all_masked_irq_flags 0x3f
-# define __save_and_cli_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d"(x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __all_masked_irq_flags 0x1f
-# define __save_and_cli_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d"(x) \
-	)
-#endif
-
-#define irqs_enabled_from_flags_hw(x)	((x) != __all_masked_irq_flags)
-#define raw_irqs_disabled_flags(flags)	(!irqs_enabled_from_flags_hw(flags))
-#define local_test_iflag_hw(x)		irqs_enabled_from_flags_hw(x)
-
-#define local_save_flags(x)					 \
-	do {							 \
-		(x) = __ipipe_test_root() ?			 \
-			__all_masked_irq_flags : bfin_irq_flags; \
-		barrier();					 \
-	} while (0)
-
-#define local_irq_save(x)					 \
-	do {						 	 \
-		(x) = __ipipe_test_and_stall_root() ?		 \
-			__all_masked_irq_flags : bfin_irq_flags; \
-		barrier();					 \
-	} while (0)
-
-static inline void local_irq_restore(unsigned long x)
-{
-	barrier();
-	__ipipe_restore_root(x == __all_masked_irq_flags);
-}
-
-#define local_irq_disable()			\
-	do {					\
-		__ipipe_stall_root();		\
-		barrier();			\
-	} while (0)
-
-static inline void local_irq_enable(void)
-{
-	barrier();
-	__ipipe_unstall_root();
-}
-
-#define irqs_disabled()		__ipipe_test_root()
-
-#define local_save_flags_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d"(x) \
-	)
-
-#define	irqs_disabled_hw()				\
-	({						\
-		unsigned long flags;			\
-		local_save_flags_hw(flags);		\
-		!irqs_enabled_from_flags_hw(flags);	\
-	})
-
-static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
-{
-	/* Merge virtual and real interrupt mask bits into a single
-	   32bit word. */
-	return (real & ~(1 << 31)) | ((virt != 0) << 31);
-}
-
-static inline int raw_demangle_irq_bits(unsigned long *x)
-{
-	int virt = (*x & (1 << 31)) != 0;
-	*x &= ~(1L << 31);
-	return virt;
-}
-
-#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
-
-#define local_irq_disable_hw()						\
-	do {								\
-		int _tmp_dummy;						\
-		if (!irqs_disabled_hw())				\
-			ipipe_trace_begin(0x80000000);			\
-		__asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : );	\
-	} while (0)
-
-#define local_irq_enable_hw()						\
-	do {								\
-		if (irqs_disabled_hw())					\
-			ipipe_trace_end(0x80000000);			\
-		__asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags));	\
-	} while (0)
-
-#define local_irq_save_hw(x)				\
-	do {						\
-		__save_and_cli_hw(x);			\
-		if (local_test_iflag_hw(x))		\
-			ipipe_trace_begin(0x80000001);	\
-	} while (0)
-
-#define local_irq_restore_hw(x)				\
-	do {						\
-		if (local_test_iflag_hw(x)) {		\
-			ipipe_trace_end(0x80000001);	\
-			local_irq_enable_hw_notrace();	\
-		}					\
-	} while (0)
-
-#define local_irq_disable_hw_notrace()					\
-	do {								\
-		int _tmp_dummy;						\
-		__asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : );	\
-	} while (0)
-
-#define local_irq_enable_hw_notrace() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d"(bfin_irq_flags) \
-	)
-
-#define local_irq_save_hw_notrace(x) __save_and_cli_hw(x)
-
-#define local_irq_restore_hw_notrace(x)			\
-	do {						\
-		if (local_test_iflag_hw(x))		\
-			local_irq_enable_hw_notrace();	\
-	} while (0)
-
-#else /* CONFIG_IPIPE_TRACE_IRQSOFF */
-
-#define local_irq_enable_hw() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d"(bfin_irq_flags) \
-	)
-
-#define local_irq_disable_hw()			\
-	do {					\
-		int _tmp_dummy;			\
-		__asm__ __volatile__ (		\
-			"cli %0;"		\
-			: "=d" (_tmp_dummy));	\
-	} while (0)
-
-#define local_irq_restore_hw(x) \
-	do { \
-		if (irqs_enabled_from_flags_hw(x)) \
-			local_irq_enable_hw(); \
-	} while (0)
-
-#define local_irq_save_hw(x)		__save_and_cli_hw(x)
-
-#define local_irq_disable_hw_notrace()	local_irq_disable_hw()
-#define local_irq_enable_hw_notrace()	local_irq_enable_hw()
-#define local_irq_save_hw_notrace(x)	local_irq_save_hw(x)
-#define local_irq_restore_hw_notrace(x)	local_irq_restore_hw(x)
-
-#endif  /* CONFIG_IPIPE_TRACE_IRQSOFF */
-
-#else /* !CONFIG_IPIPE */
-
-/*
- * Interrupt configuring macros.
- */
-#define local_irq_disable() \
-	do { \
-		int __tmp_dummy; \
-		__asm__ __volatile__( \
-			"cli %0;" \
-			: "=d" (__tmp_dummy) \
-		); \
-	} while (0)
-
-#define local_irq_enable() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d" (bfin_irq_flags) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d" (x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d" (x) \
-	)
-#endif
-
-#define local_save_flags(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d" (x) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
-#else
-#define irqs_enabled_from_flags(x) ((x) != 0x1f)
-#endif
-
-#define local_irq_restore(x) \
-	do { \
-		if (irqs_enabled_from_flags(x)) \
-			local_irq_enable(); \
-	} while (0)
-
-/* For spinlocks etc */
-#define local_irq_save(x) __save_and_cli(x)
-
-#define irqs_disabled()				\
-({						\
-	unsigned long flags;			\
-	local_save_flags(flags);		\
-	!irqs_enabled_from_flags(flags);	\
-})
-
-#define local_irq_save_hw(x)		local_irq_save(x)
-#define local_irq_restore_hw(x)		local_irq_restore(x)
-#define local_irq_enable_hw()		local_irq_enable()
-#define local_irq_disable_hw()		local_irq_disable()
-#define irqs_disabled_hw()		irqs_disabled()
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
+#include <mach/irq.h>
 
-#endif /* !CONFIG_IPIPE */
+/* Xenomai IPIPE helpers */
+#define local_irq_restore_hw(x) local_irq_restore(x)
+#define local_irq_save_hw(x)    local_irq_save(x)
+#define local_irq_enable_hw(x)  local_irq_enable(x)
+#define local_irq_disable_hw(x) local_irq_disable(x)
+#define irqs_disabled_hw(x)     irqs_disabled(x)
 
 #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
 # define NOP_PAD_ANOMALY_05000244 "nop; nop;"
diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h
new file mode 100644
index 00000000000..139cba4651b
--- /dev/null
+++ b/arch/blackfin/include/asm/irqflags.h
@@ -0,0 +1,63 @@
+/*
+ * interface to Blackfin CEC
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_IRQFLAGS_H__
+#define __ASM_BFIN_IRQFLAGS_H__
+
+#ifdef CONFIG_SMP
+# include <asm/pda.h>
+# include <asm/processor.h>
+/* Forward decl needed due to cdef inter dependencies */
+static inline uint32_t __pure bfin_dspid(void);
+# define blackfin_core_id() (bfin_dspid() & 0xff)
+# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
+#else
+extern unsigned long bfin_irq_flags;
+#endif
+
+static inline void bfin_sti(unsigned long flags)
+{
+	asm volatile("sti %0;" : : "d" (flags));
+}
+
+static inline unsigned long bfin_cli(void)
+{
+	unsigned long flags;
+	asm volatile("cli %0;" : "=d" (flags));
+	return flags;
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	bfin_cli();
+}
+static inline void raw_local_irq_enable(void)
+{
+	bfin_sti(bfin_irq_flags);
+}
+
+#define raw_local_save_flags(flags) do { (flags) = bfin_read_IMASK(); } while (0)
+
+#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if (!raw_irqs_disabled_flags(flags))
+		raw_local_irq_enable();
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+	bfin_sti(0x3f);
+#endif
+	return flags;
+}
+#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif
diff --git a/arch/blackfin/include/asm/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h
index e215f710497..0a88622339e 100644
--- a/arch/blackfin/include/asm/kmap_types.h
+++ b/arch/blackfin/include/asm/kmap_types.h
@@ -1,21 +1,6 @@
 #ifndef _ASM_KMAP_TYPES_H
 #define _ASM_KMAP_TYPES_H
 
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
 #endif
diff --git a/arch/blackfin/include/asm/mutex-dec.h b/arch/blackfin/include/asm/mutex-dec.h
deleted file mode 100644
index 0134151656a..00000000000
--- a/arch/blackfin/include/asm/mutex-dec.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * include/asm-generic/mutex-dec.h
- *
- * Generic implementation of the mutex fastpath, based on atomic
- * decrement/increment.
- */
-#ifndef _ASM_GENERIC_MUTEX_DEC_H
-#define _ASM_GENERIC_MUTEX_DEC_H
-
-/**
- *  __mutex_fastpath_lock - try to take the lock by moving the count
- *                          from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function MUST leave the value lower than
- * 1 even when the "1" assertion wasn't true.
- */
-static inline void
-__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		fail_fn(count);
-	else
-		smp_mb();
-}
-
-/**
- *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
- *                                 from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
- * or anything the slow path function returns.
- */
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		return fail_fn(count);
-	else {
-		smp_mb();
-		return 0;
-	}
-}
-
-/**
- *  __mutex_fastpath_unlock - try to promote the count from 0 to 1
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 0
- *
- * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>.
- * In the failure case, this function is allowed to either set the value to
- * 1, or to set it to a value lower than 1.
- *
- * If the implementation sets it to a value of lower than 1, then the
- * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
- * to return 0 otherwise.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
-{
-	smp_mb();
-	if (unlikely(atomic_inc_return(count) <= 0))
-		fail_fn(count);
-}
-
-#define __mutex_slowpath_needs_to_unlock()		1
-
-/**
- * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
- *
- *  @count: pointer of type atomic_t
- *  @fail_fn: fallback function
- *
- * Change the count from 1 to a value lower than 1, and return 0 (failure)
- * if it wasn't 1 originally, or return 1 (success) otherwise. This function
- * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
- * Additionally, if the value was < 0 originally, this function must not leave
- * it to 0 on failure.
- *
- * If the architecture has no effective trylock variant, it should call the
- * <fail_fn> spinlock-based trylock variant unconditionally.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	/*
-	 * We have two variants here. The cmpxchg based one is the best one
-	 * because it never induce a false contention state.  It is included
-	 * here because architectures using the inc/dec algorithms over the
-	 * xchg ones are much more likely to support cmpxchg natively.
-	 *
-	 * If not we fall back to the spinlock based variant - that is
-	 * just as efficient (and simpler) as a 'destructive' probing of
-	 * the mutex state would be.
-	 */
-#ifdef __HAVE_ARCH_CMPXCHG
-	if (likely(atomic_cmpxchg(count, 1, 0) == 1)) {
-		smp_mb();
-		return 1;
-	}
-	return 0;
-#else
-	return fail_fn(count);
-#endif
-}
-
-#endif
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index 1443c3353a8..e7fd0ecd73f 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -4,4 +4,15 @@
 /* nothing to see, move along */
 #include <asm-generic/sections.h>
 
+/* only used when MTD_UCLINUX */
+extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+extern unsigned long _ramstart, _ramend, _rambase;
+extern unsigned long memory_start, memory_end, physical_mem_end;
+
+extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
+	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
+	_ebss_l2[], _l2_lma_start[];
+
 #endif
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index a4c8254bec5..294dbda2416 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -35,10 +35,10 @@
 #define _BLACKFIN_SYSTEM_H
 
 #include <linux/linkage.h>
-#include <linux/compiler.h>
+#include <linux/irqflags.h>
 #include <mach/anomaly.h>
+#include <asm/cache.h>
 #include <asm/pda.h>
-#include <asm/processor.h>
 #include <asm/irq.h>
 
 /*
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index cf5066d3efd..da35133c171 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -380,8 +380,9 @@
 #define __NR_inotify_init1	365
 #define __NR_preadv		366
 #define __NR_pwritev		367
+#define __NR_rt_tgsigqueueinfo	368
 
-#define __NR_syscall		368
+#define __NR_syscall		369
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index fd4d4328a0f..3731088e181 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -15,6 +15,10 @@ else
     obj-y += time.o
 endif
 
+obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
+CFLAGS_REMOVE_ftrace.o = -pg
+
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
@@ -23,6 +27,7 @@ obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+obj-$(CONFIG_STACKTRACE)             += stacktrace.o
 
 # the kgdb test puts code into L2 and without linker
 # relaxation, we need to force long calls to/from it
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 763ed84ba45..e0bf8cc0690 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -453,10 +453,10 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 	unsigned long src = (unsigned long)psrc;
 	size_t bulk, rest;
 
-	if (bfin_addr_dcachable(src))
+	if (bfin_addr_dcacheable(src))
 		blackfin_dcache_flush_range(src, src + size);
 
-	if (bfin_addr_dcachable(dst))
+	if (bfin_addr_dcacheable(dst))
 		blackfin_dcache_invalidate_range(dst, dst + size);
 
 	bulk = size & ~0xffff;
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 53e893ff708..aa05e638fb7 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -103,3 +103,8 @@ EXPORT_SYMBOL(__raw_smp_mark_barrier_asm);
 EXPORT_SYMBOL(__raw_smp_check_barrier_asm);
 #endif
 #endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+extern void _mcount(void);
+EXPORT_SYMBOL(_mcount);
+#endif
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 87463ce87f5..784923e52a9 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -151,7 +151,7 @@ static noinline int dcplb_miss(unsigned int cpu)
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
 #ifdef CONFIG_BFIN_DCACHE
-	if (bfin_addr_dcachable(addr)) {
+	if (bfin_addr_dcacheable(addr)) {
 		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #ifdef CONFIG_BFIN_WT
 		d_data |= CPLB_L1_AOW | CPLB_WT;
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
index 8cbb47c7b66..12b030842fd 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -28,6 +28,7 @@
 #include <asm/cplbinit.h>
 #include <asm/cplb.h>
 #include <asm/mmu_context.h>
+#include <asm/traps.h>
 
 /*
  * WARNING
@@ -100,28 +101,6 @@ static inline void write_icplb_data(int cpu, int idx, unsigned long data,
 #endif
 }
 
-/*
- * Given the contents of the status register, return the index of the
- * CPLB that caused the fault.
- */
-static inline int faulting_cplb_index(int status)
-{
-	int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF);
-	return 30 - signbits;
-}
-
-/*
- * Given the contents of the status register and the DCPLB_DATA contents,
- * return true if a write access should be permitted.
- */
-static inline int write_permitted(int status, unsigned long data)
-{
-	if (status & FAULT_USERSUPV)
-		return !!(data & CPLB_SUPV_WR);
-	else
-		return !!(data & CPLB_USER_WR);
-}
-
 /* Counters to implement round-robin replacement.  */
 static int icplb_rr_index[NR_CPUS] PDT_ATTR;
 static int dcplb_rr_index[NR_CPUS] PDT_ATTR;
@@ -245,43 +224,16 @@ MGR_ATTR static int dcplb_miss(int cpu)
 	return CPLB_RELOADED;
 }
 
-MGR_ATTR static noinline int dcplb_protection_fault(int cpu)
-{
-	int status = bfin_read_DCPLB_STATUS();
-
-	nr_dcplb_prot[cpu]++;
-
-	if (likely(status & FAULT_RW)) {
-		int idx = faulting_cplb_index(status);
-		unsigned long regaddr = DCPLB_DATA0 + idx * 4;
-		unsigned long data = bfin_read32(regaddr);
-
-		/* Check if fault is to dirty a clean page */
-		if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) &&
-		    write_permitted(status, data)) {
-
-			dcplb_tbl[cpu][idx].data = data;
-			bfin_write32(regaddr, data);
-			return CPLB_RELOADED;
-		}
-	}
-
-	return CPLB_PROT_VIOL;
-}
-
 MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
 	unsigned int cpu = smp_processor_id();
 	switch (cause) {
-	case 0x2C:
+	case VEC_CPLB_I_M:
 		return icplb_miss(cpu);
-	case 0x26:
+	case VEC_CPLB_M:
 		return dcplb_miss(cpu);
 	default:
-		if (unlikely(cause == 0x23))
-			return dcplb_protection_fault(cpu);
-
 		return CPLB_UNKNOWN_ERR;
 	}
 }
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 3302719173c..2ab56811841 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -202,11 +202,15 @@ asmlinkage void __init init_early_exception_vectors(void)
 asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
 {
 	/* This can happen before the uart is initialized, so initialize
-	 * the UART now
+	 * the UART now (but only if we are running on the processor we think
+	 * we are compiled for - otherwise we write to MMRs that don't exist,
+	 * and cause other problems. Nothing comes out the UART, but it does
+	 * end up in the __buf_log.
 	 */
-	if (likely(early_console == NULL))
+	if (likely(early_console == NULL) && CPUID == bfin_cpuid())
 		setup_early_printk(DEFAULT_EARLY_PORT);
 
+	printk(KERN_EMERG "Early panic\n");
 	dump_bfin_mem(fp);
 	show_regs(fp);
 	dump_bfin_trace_buffer();
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
new file mode 100644
index 00000000000..6980b7a0615
--- /dev/null
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -0,0 +1,140 @@
+/*
+ * mcount and friends -- ftrace stuff
+ *
+ * Copyright (C) 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ftrace.h>
+
+.text
+
+/* GCC will have called us before setting up the function prologue, so we
+ * can clobber the normal scratch registers, but we need to make sure to
+ * save/restore the registers used for argument passing (R0-R2) in case
+ * the profiled function is using them.  With data registers, R3 is the
+ * only one we can blow away.  With pointer registers, we have P0-P2.
+ *
+ * Upon entry, the RETS will point to the top of the current profiled
+ * function.  And since GCC setup the frame for us, the previous function
+ * will be waiting there.  mmmm pie.
+ */
+ENTRY(__mcount)
+	/* save third function arg early so we can do testing below */
+	[--sp] = r2;
+
+	/* load the function pointer to the tracer */
+	p0.l = _ftrace_trace_function;
+	p0.h = _ftrace_trace_function;
+	r3 = [p0];
+
+	/* optional micro optimization: don't call the stub tracer */
+	r2.l = _ftrace_stub;
+	r2.h = _ftrace_stub;
+	cc = r2 == r3;
+	if ! cc jump .Ldo_trace;
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* if the ftrace_graph_return function pointer is not set to
+	 * the ftrace_stub entry, call prepare_ftrace_return().
+	 */
+	p0.l = _ftrace_graph_return;
+	p0.h = _ftrace_graph_return;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+
+	/* similarly, if the ftrace_graph_entry function pointer is not
+	 * set to the ftrace_graph_entry_stub entry, ...
+	 */
+	p0.l = _ftrace_graph_entry;
+	p0.h = _ftrace_graph_entry;
+	r2.l = _ftrace_graph_entry_stub;
+	r2.h = _ftrace_graph_entry_stub;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+#endif
+
+	r2 = [sp++];
+	rts;
+
+.Ldo_trace:
+
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* setup the tracer function */
+	p0 = r3;
+
+	/* tracer(ulong frompc, ulong selfpc):
+	 *  frompc: the pc that did the call to ...
+	 *  selfpc: ... this location
+	 * the selfpc itself will need adjusting for the mcount call
+	 */
+	r1 = rets;
+	r0 = [fp + 4];
+	r1 += -MCOUNT_INSN_SIZE;
+
+	/* call the tracer */
+	call (p0);
+
+	/* restore state and get out of dodge */
+.Lfinish_trace:
+	rets = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	r2 = [sp++];
+
+.globl _ftrace_stub
+_ftrace_stub:
+	rts;
+ENDPROC(__mcount)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/* The prepare_ftrace_return() function is similar to the trace function
+ * except it takes a pointer to the location of the frompc.  This is so
+ * the prepare_ftrace_return() can hijack it temporarily for probing
+ * purposes.
+ */
+ENTRY(_ftrace_graph_caller)
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	r0 = fp;
+	r1 = rets;
+	r0 += 4;
+	r1 += -MCOUNT_INSN_SIZE;
+	call _prepare_ftrace_return;
+
+	jump .Lfinish_trace;
+ENDPROC(_ftrace_graph_caller)
+
+/* Undo the rewrite caused by ftrace_graph_caller().  The common function
+ * ftrace_return_to_handler() will return the original rets so we can
+ * restore it and be on our way.
+ */
+ENTRY(_return_to_handler)
+	/* make sure original return values are saved */
+	[--sp] = p0;
+	[--sp] = r0;
+	[--sp] = r1;
+
+	/* get original return address */
+	call _ftrace_return_to_handler;
+	rets = r0;
+
+	/* anomaly 05000371 - make sure we have at least three instructions
+	 * between rets setting and the return
+	 */
+	r1 = [sp++];
+	r0 = [sp++];
+	p0 = [sp++];
+	rts;
+ENDPROC(_return_to_handler)
+#endif
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
new file mode 100644
index 00000000000..905bfc40a00
--- /dev/null
+++ b/arch/blackfin/kernel/ftrace.c
@@ -0,0 +1,42 @@
+/*
+ * ftrace graph code
+ *
+ * Copyright (C) 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/atomic.h>
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth) == -EBUSY)
+		return;
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		return;
+	}
+
+	/* all is well in the world !  hijack RETS ... */
+	*parent = return_hooker;
+}
+
+#endif
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index 2c228c02097..c26c34de9f3 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -35,10 +35,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial task structure.
  *
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 5fc424803a1..d8cde1fc5cb 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -99,7 +99,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 * interrupt.
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-	this_domain = ipipe_current_domain;
+	this_domain = __ipipe_current_domain;
 
 	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
 		head = &this_domain->p_link;
@@ -212,7 +212,9 @@ void __ipipe_unstall_root_raw(void)
 
 int __ipipe_syscall_root(struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p;
 	unsigned long flags;
+	int ret;
 
 	/*
 	 * We need to run the IRQ tail hook whenever we don't
@@ -231,29 +233,31 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 	/*
 	 * This routine either returns:
 	 * 0 -- if the syscall is to be passed to Linux;
-	 * 1 -- if the syscall should not be passed to Linux, and no
+	 * >0 -- if the syscall should not be passed to Linux, and no
 	 * tail work should be performed;
-	 * -1 -- if the syscall should not be passed to Linux but the
+	 * <0 -- if the syscall should not be passed to Linux but the
 	 * tail work has to be performed (for handling signals etc).
 	 */
 
-	if (__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL) &&
-	    __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs) > 0) {
-		if (ipipe_root_domain_p && !in_atomic()) {
-			/*
-			 * Sync pending VIRQs before _TIF_NEED_RESCHED
-			 * is tested.
-			 */
-			local_irq_save_hw(flags);
-			if ((ipipe_root_cpudom_var(irqpend_himask) & IPIPE_IRQMASK_VIRT) != 0)
-				__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
-			local_irq_restore_hw(flags);
-			return -1;
-		}
+	if (!__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL))
+		return 0;
+
+	ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs);
+
+	local_irq_save_hw(flags);
+
+	if (!__ipipe_root_domain_p) {
+		local_irq_restore_hw(flags);
 		return 1;
 	}
 
-	return 0;
+	p = ipipe_root_cpudom_ptr();
+	if ((p->irqpend_himask & IPIPE_IRQMASK_VIRT) != 0)
+		__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
+
+	local_irq_restore_hw(flags);
+
+	return -ret;
 }
 
 unsigned long ipipe_critical_enter(void (*syncfn) (void))
@@ -329,9 +333,7 @@ asmlinkage void __ipipe_sync_root(void)
 
 void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	struct ipipe_domain *ipd = ipipe_current_domain;
-
-	if (ipd == ipipe_root_domain) {
+	if (__ipipe_root_domain_p) {
 		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
 			return;
 	}
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 80447f99c2b..6454babdfaf 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -1098,7 +1098,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			CPUID, bfin_cpuid());
 
 	seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
-		"stepping\t: %d\n",
+		"stepping\t: %d ",
 		cpu, cclk/1000000, sclk/1000000,
 #ifdef CONFIG_MPU
 		"mpu on",
@@ -1107,7 +1107,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #endif
 		revid);
 
-	seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
+	if (bfin_revid() != bfin_compiled_revid()) {
+		if (bfin_compiled_revid() == -1)
+			seq_printf(m, "(Compiled for Rev none)");
+		else if (bfin_compiled_revid() == 0xffff)
+			seq_printf(m, "(Compiled for Rev any)");
+		else
+			seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid());
+	}
+
+	seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
 		cclk/1000000, cclk%1000000,
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
@@ -1172,6 +1181,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #ifdef __ARCH_SYNC_CORE_DCACHE
 	seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
 #endif
+#ifdef __ARCH_SYNC_CORE_ICACHE
+	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
+#endif
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 	switch ((cpudata->imemctl >> 3) & WAYALL_L) {
 	case WAY0_L:
diff --git a/arch/blackfin/kernel/stacktrace.c b/arch/blackfin/kernel/stacktrace.c
new file mode 100644
index 00000000000..30301e1eace
--- /dev/null
+++ b/arch/blackfin/kernel/stacktrace.c
@@ -0,0 +1,53 @@
+/*
+ * Blackfin stacktrace code (mostly copied from avr32)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/module.h>
+
+register unsigned long current_frame_pointer asm("FP");
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long rets;
+};
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long low, high;
+	unsigned long fp;
+	struct stackframe *frame;
+	int skip = trace->skip;
+
+	low = (unsigned long)task_stack_page(current);
+	high = low + THREAD_SIZE;
+	fp = current_frame_pointer;
+
+	while (fp >= low && fp <= (high - sizeof(*frame))) {
+		frame = (struct stackframe *)fp;
+
+		if (skip) {
+			skip--;
+		} else {
+			trace->entries[trace->nr_entries++] = frame->rets;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+
+		/*
+		 * The next frame must be at a higher address than the
+		 * current frame.
+		 */
+		low = fp + sizeof(*frame);
+		fp = frame->fp;
+	}
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index aa76dfb0226..d279552fe9b 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -27,6 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/bug.h>
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@@ -238,6 +239,11 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 
 }
 
+static int kernel_mode_regs(struct pt_regs *regs)
+{
+	return regs->ipend & 0xffc0;
+}
+
 asmlinkage void trap_c(struct pt_regs *fp)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
@@ -246,6 +252,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 	unsigned int cpu = smp_processor_id();
 #endif
+	const char *strerror = NULL;
 	int sig = 0;
 	siginfo_t info;
 	unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
@@ -259,27 +266,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	 * double faults if the stack has become corrupt
 	 */
 
-	/* If the fault was caused by a kernel thread, or interrupt handler
-	 * we will kernel panic, so the system reboots.
-	 * If KGDB is enabled, don't set this for kernel breakpoints
-	*/
-
-	/* TODO: check to see if we are in some sort of deferred HWERR
-	 * that we should be able to recover from, not kernel panic
-	 */
-	if ((bfin_read_IPEND() & 0xFFC0) && (trapnr != VEC_STEP)
-#ifdef CONFIG_KGDB
-		&& (trapnr != VEC_EXCPT02)
+#ifndef CONFIG_KGDB
+	/* IPEND is skipped if KGDB isn't enabled (see entry code) */
+	fp->ipend = bfin_read_IPEND();
 #endif
-	){
-		console_verbose();
-		oops_in_progress = 1;
-	} else if (current) {
-		if (current->mm == NULL) {
-			console_verbose();
-			oops_in_progress = 1;
-		}
-	}
 
 	/* trap_c() will be called for exceptions. During exceptions
 	 * processing, the pc value should be set with retx value.
@@ -307,15 +297,15 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a breakpoint in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 	/* 0x03 - User Defined, userspace stack overflow */
 	case VEC_EXCPT03:
 		info.si_code = SEGV_STACKFLOW;
 		sig = SIGSEGV;
-		verbose_printk(KERN_NOTICE EXC_0x03(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x03(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x02 - KGDB initial connection and break signal trap */
@@ -324,7 +314,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		info.si_code = TRAP_ILLTRAP;
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP();
-		return;
+		goto traps_done;
 #endif
 	/* 0x04 - User Defined */
 	/* 0x05 - User Defined */
@@ -344,7 +334,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_EXCPT04 ... VEC_EXCPT15:
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x04(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x04(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x10 HW Single step, handled here */
@@ -353,15 +343,15 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGTRAP;
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a single step in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 	/* 0x11 - Trace Buffer Full, handled here */
 	case VEC_OVFLOW:
 		info.si_code = TRAP_TRACEFLOW;
 		sig = SIGTRAP;
-		verbose_printk(KERN_NOTICE EXC_0x11(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x11(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x12 - Reserved, Caught by default */
@@ -381,37 +371,54 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	/* 0x20 - Reserved, Caught by default */
 	/* 0x21 - Undefined Instruction, handled here */
 	case VEC_UNDEF_I:
+#ifdef CONFIG_BUG
+		if (kernel_mode_regs(fp)) {
+			switch (report_bug(fp->pc, fp)) {
+			case BUG_TRAP_TYPE_NONE:
+				break;
+			case BUG_TRAP_TYPE_WARN:
+				dump_bfin_trace_buffer();
+				fp->pc += 2;
+				goto traps_done;
+			case BUG_TRAP_TYPE_BUG:
+				/* call to panic() will dump trace, and it is
+				 * off at this point, so it won't be clobbered
+				 */
+				panic("BUG()");
+			}
+		}
+#endif
 		info.si_code = ILL_ILLOPC;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x21(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x22 - Illegal Instruction Combination, handled here */
 	case VEC_ILGAL_I:
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x22(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x22(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x23 - Data CPLB protection violation, handled here */
 	case VEC_CPLB_VL:
 		info.si_code = ILL_CPLB_VI;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x23(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x24 - Data access misaligned, handled here */
 	case VEC_MISALI_D:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x24(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x24(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x25 - Unrecoverable Event, handled here */
 	case VEC_UNCOV:
 		info.si_code = ILL_ILLEXCPT;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x25(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x25(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
@@ -419,7 +426,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_CPLB_M:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x26(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x26(KERN_NOTICE);
 		break;
 	/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
 	case VEC_CPLB_MHIT:
@@ -427,10 +434,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "NULL pointer access\n");
+			strerror = KERN_NOTICE "NULL pointer access\n";
 		else
 #endif
-			verbose_printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+			strerror = KERN_NOTICE EXC_0x27(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x28 - Emulation Watchpoint, handled here */
@@ -440,8 +447,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		pr_debug(EXC_0x28(KERN_DEBUG));
 		CHK_DEBUGGER_TRAP_MAYBE();
 		/* Check if this is a watchpoint in kernel space */
-		if (fp->ipend & 0xffc0)
-			return;
+		if (kernel_mode_regs(fp))
+			goto traps_done;
 		else
 			break;
 #ifdef CONFIG_BF535
@@ -449,7 +456,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_ISTRU_VL:      /* ADSP-BF535 only (MH) */
 		info.si_code = BUS_OPFETCH;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
+		strerror = KERN_NOTICE "BF535: VEC_ISTRU_VL\n";
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 #else
@@ -459,21 +466,21 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	case VEC_MISALI_I:
 		info.si_code = BUS_ADRALN;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2A(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2B - Instruction CPLB protection violation, handled here */
 	case VEC_CPLB_I_VL:
 		info.si_code = ILL_CPLB_VI;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2B(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
 	case VEC_CPLB_I_M:
 		info.si_code = ILL_CPLB_MISS;
 		sig = SIGBUS;
-		verbose_printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2C(KERN_NOTICE);
 		break;
 	/* 0x2D - Instruction CPLB Multiple Hits, handled here */
 	case VEC_CPLB_I_MHIT:
@@ -481,17 +488,17 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 		if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "Jump to NULL address\n");
+			strerror = KERN_NOTICE "Jump to NULL address\n";
 		else
 #endif
-			verbose_printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+			strerror = KERN_NOTICE EXC_0x2D(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2E - Illegal use of Supervisor Resource, handled here */
 	case VEC_ILL_RES:
 		info.si_code = ILL_PRVOPC;
 		sig = SIGILL;
-		verbose_printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE));
+		strerror = KERN_NOTICE EXC_0x2E(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
 	/* 0x2F - Reserved, Caught by default */
@@ -519,17 +526,17 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR):
 			info.si_code = BUS_ADRALN;
 			sig = SIGBUS;
-			verbose_printk(KERN_NOTICE HWC_x2(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x2(KERN_NOTICE);
 			break;
 		/* External Memory Addressing Error */
 		case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
 			info.si_code = BUS_ADRERR;
 			sig = SIGBUS;
-			verbose_printk(KERN_NOTICE HWC_x3(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x3(KERN_NOTICE);
 			break;
 		/* Performance Monitor Overflow */
 		case (SEQSTAT_HWERRCAUSE_PERF_FLOW):
-			verbose_printk(KERN_NOTICE HWC_x12(KERN_NOTICE));
+			strerror = KERN_NOTICE HWC_x12(KERN_NOTICE);
 			break;
 		/* RAISE 5 instruction */
 		case (SEQSTAT_HWERRCAUSE_RAISE_5):
@@ -546,7 +553,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	 * if we get here we hit a reserved one, so panic
 	 */
 	default:
-		oops_in_progress = 1;
 		info.si_code = ILL_ILLPARAOP;
 		sig = SIGILL;
 		verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
@@ -557,6 +563,16 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 	BUG_ON(sig == 0);
 
+	/* If the fault was caused by a kernel thread, or interrupt handler
+	 * we will kernel panic, so the system reboots.
+	 */
+	if (kernel_mode_regs(fp) || (current && !current->mm)) {
+		console_verbose();
+		oops_in_progress = 1;
+		if (strerror)
+			verbose_printk(strerror);
+	}
+
 	if (sig != SIGTRAP) {
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
@@ -606,8 +622,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
 		fp->pc = SAFE_USER_INSTRUCTION;
 
+ traps_done:
 	trace_buffer_restore(j);
-	return;
 }
 
 /* Typical exception handling routines	*/
@@ -792,6 +808,18 @@ void dump_bfin_trace_buffer(void)
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
+#ifdef CONFIG_BUG
+int is_valid_bugaddr(unsigned long addr)
+{
+	unsigned short opcode;
+
+	if (!get_instruction(&opcode, (unsigned short *)addr))
+		return 0;
+
+	return opcode == BFIN_BUG_OPCODE;
+}
+#endif
+
 /*
  * Checks to see if the address pointed to is either a
  * 16-bit CALL instruction, or a 32-bit CALL instruction
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 8b67167cb4f..6ac307ca0d8 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -54,6 +54,7 @@ SECTIONS
 		SCHED_TEXT
 #endif
 		LOCK_TEXT
+		IRQENTRY_TEXT
 		KPROBES_TEXT
 		*(.text.*)
 		*(.fixup)
@@ -166,6 +167,20 @@ SECTIONS
 	}
 	PERCPU(4)
 	SECURITY_INIT
+
+	/* we have to discard exit text and such at runtime, not link time, to
+	 * handle embedded cross-section references (alt instructions, bug
+	 * table, eh_frame, etc...)
+	 */
+	.exit.text :
+	{
+		EXIT_TEXT
+	}
+	.exit.data :
+	{
+		EXIT_DATA
+	}
+
 	.init.ramfs :
 	{
 		. = ALIGN(4);
@@ -264,8 +279,6 @@ SECTIONS
 
 	/DISCARD/ :
 	{
-		EXIT_TEXT
-		EXIT_DATA
 		*(.exitcall.exit)
 	}
 }
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
index 762a7f02970..cd605e7d851 100644
--- a/arch/blackfin/lib/checksum.c
+++ b/arch/blackfin/lib/checksum.c
@@ -116,6 +116,7 @@ __sum16 ip_compute_csum(const void *buff, int len)
 {
 	return (__force __sum16)~do_csum(buff, len);
 }
+EXPORT_SYMBOL(ip_compute_csum);
 
 /*
  * copy from fs while checksumming, otherwise like csum_partial
@@ -130,6 +131,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst,
 	memcpy(dst, (__force void *)src, len);
 	return csum_partial(dst, len, sum);
 }
+EXPORT_SYMBOL(csum_partial_copy_from_user);
 
 /*
  * copy from ds while checksumming, otherwise like csum_partial
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 62bba09bcce..1382f038235 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -246,7 +246,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "m25p80", /* Name of spi_driver for this device */
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.chip_select = 2, /* On BF518F-EZBRD it's SPI0_SSEL2 */
 		.platform_data = &bfin_spi_flash_data,
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
@@ -369,6 +369,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -399,6 +404,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 6d6f9effa0b..1eaf27ff722 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -664,6 +664,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 1435c5d38cd..9f9c0005dcf 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -467,6 +467,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 147edd1eb1a..3e5b7db6b06 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -723,6 +723,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 895f213ea45..38cf8ffd6d7 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -266,6 +266,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 0765872a8ad..9ecdc361fa6 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -162,6 +162,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index a727e538fa2..1443e92d8b6 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -160,6 +160,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 842f1c9c239..89a5ec4ca04 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -196,6 +196,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index e19c565ade1..a68ade8a3ca 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -299,6 +299,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 4fee1967312..2a87d1cfcd0 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -182,8 +182,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 3c159819e55..399f81da7b9 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -184,6 +184,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 26707ce39f2..838240f151f 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -398,8 +398,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index dfb5036f8a6..ff7228caa7d 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1345,7 +1345,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 	{
 		I2C_BOARD_INFO("pmic-adp5520", 0x32),
-		.irq = IRQ_PF7,
+		.irq = IRQ_PG0,
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 28057459120..e523e6e610d 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -182,6 +182,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index e37cb937888..57695b4c3c0 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -352,6 +352,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -366,6 +371,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index f53ad682530..f5a3c30a41b 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -612,6 +612,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -626,6 +631,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index add5a17452c..805a57b5e65 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -396,6 +396,8 @@ static struct platform_device bfin_sir3_device = {
 #endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
 static struct resource smsc911x_resources[] = {
 	{
 		.name = "smsc911x-memory",
@@ -409,11 +411,22 @@ static struct resource smsc911x_resources[] = {
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_32BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
 static struct platform_device smsc911x_device = {
 	.name = "smsc911x",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smsc911x_resources),
 	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 #endif
 
@@ -741,6 +754,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -755,6 +773,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 0dd9685e5d5..0c9d72c5f5b 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -177,8 +177,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 0e2178a1aec..b5ef7ff7b7b 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -304,6 +304,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };
diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c
index e6ab1f81512..b59ce3cb380 100644
--- a/arch/blackfin/mach-common/cache-c.c
+++ b/arch/blackfin/mach-common/cache-c.c
@@ -16,9 +16,21 @@
 void blackfin_invalidate_entire_dcache(void)
 {
 	u32 dmem = bfin_read_DMEM_CONTROL();
-	SSYNC();
 	bfin_write_DMEM_CONTROL(dmem & ~0xc);
 	SSYNC();
 	bfin_write_DMEM_CONTROL(dmem);
 	SSYNC();
 }
+
+/* Invalidate the Entire Instruction cache by
+ * clearing IMC bit
+ */
+void blackfin_invalidate_entire_icache(void)
+{
+	u32 imem = bfin_read_IMEM_CONTROL();
+	bfin_write_IMEM_CONTROL(imem & ~0x4);
+	SSYNC();
+	bfin_write_IMEM_CONTROL(imem);
+	SSYNC();
+}
+
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index da0558ad1b1..31fa313e81c 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -42,6 +42,7 @@
 #include <asm/thread_info.h>  /* TIF_NEED_RESCHED */
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
+#include <asm/traps.h>
 
 #include <asm/context.S>
 
@@ -84,13 +85,15 @@ ENTRY(_ex_workaround_261)
 	if !cc jump _bfin_return_from_exception;
 	/* fall through */
 	R7 = P4;
-	R6 = 0x26;	/* Data CPLB Miss */
+	R6 = VEC_CPLB_M;	/* Data CPLB Miss */
 	cc = R6 == R7;
 	if cc jump _ex_dcplb_miss (BP);
-	R6 = 0x23;	/* Data CPLB Miss */
+#ifdef CONFIG_MPU
+	R6 = VEC_CPLB_VL;	/* Data CPLB Violation */
 	cc = R6 == R7;
 	if cc jump _ex_dcplb_viol (BP);
-	/* Handle 0x23 Data CPLB Protection Violation
+#endif
+	/* Handle Data CPLB Protection Violation
 	 * and Data CPLB Multiple Hits - Linux Trap Zero
 	 */
 	jump _ex_trap_c;
@@ -270,7 +273,7 @@ ENTRY(_bfin_return_from_exception)
 	r6.l = lo(SEQSTAT_EXCAUSE);
 	r6.h = hi(SEQSTAT_EXCAUSE);
 	r7 = r7 & r6;
-	r6 = 0x25;
+	r6 = VEC_UNCOV;
 	CC = R7 == R6;
 	if CC JUMP _double_fault;
 #endif
@@ -1605,6 +1608,7 @@ ENTRY(_sys_call_table)
 	.long _sys_inotify_init1	/* 365 */
 	.long _sys_preadv
 	.long _sys_pwritev
+	.long _sys_rt_tgsigqueueinfo
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 3b8ebaee77f..61840059dfa 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -144,7 +144,7 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
 
 static irqreturn_t ipi_handler(int irq, void *dev_instance)
 {
-	struct ipi_message *msg, *mg;
+	struct ipi_message *msg;
 	struct ipi_message_queue *msg_queue;
 	unsigned int cpu = smp_processor_id();
 
@@ -154,7 +154,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 	msg_queue->count++;
 
 	spin_lock(&msg_queue->lock);
-	list_for_each_entry_safe(msg, mg, &msg_queue->head, list) {
+	while (!list_empty(&msg_queue->head)) {
+		msg = list_entry(msg_queue->head.next, typeof(*msg), list);
 		list_del(&msg->list);
 		switch (msg->type) {
 		case BFIN_IPI_RESCHEDULE:
@@ -221,7 +222,7 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -261,7 +262,7 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -292,7 +293,7 @@ void smp_send_reschedule(int cpu)
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -320,7 +321,7 @@ void smp_send_stop(void)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -468,6 +469,17 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
 
+#ifdef __ARCH_SYNC_CORE_ICACHE
+void resync_core_icache(void)
+{
+	unsigned int cpu = get_cpu();
+	blackfin_invalidate_entire_icache();
+	++per_cpu(cpu_data, cpu).icache_invld_count;
+	put_cpu();
+}
+EXPORT_SYMBOL(resync_core_icache);
+#endif
+
 #ifdef __ARCH_SYNC_CORE_DCACHE
 unsigned long barrier_mask __attribute__ ((__section__(".l2.bss")));
 
diff --git a/arch/cris/include/asm/kmap_types.h b/arch/cris/include/asm/kmap_types.h
index 492988cb907..d2d643c4ea5 100644
--- a/arch/cris/include/asm/kmap_types.h
+++ b/arch/cris/include/asm/kmap_types.h
@@ -5,21 +5,6 @@
  * is actually used on cris. 
  */
 
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
 #endif
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 4df0b320d52..51dcd04d277 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -38,10 +38,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/frv/kernel/init_task.c b/arch/frv/kernel/init_task.c
index 29429a8b7f6..1d3df1d9495 100644
--- a/arch/frv/kernel/init_task.c
+++ b/arch/frv/kernel/init_task.c
@@ -12,10 +12,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/h8300/include/asm/kmap_types.h b/arch/h8300/include/asm/kmap_types.h
index 1ec8a342712..be12a716011 100644
--- a/arch/h8300/include/asm/kmap_types.h
+++ b/arch/h8300/include/asm/kmap_types.h
@@ -1,21 +1,6 @@
 #ifndef _ASM_H8300_KMAP_TYPES_H
 #define _ASM_H8300_KMAP_TYPES_H
 
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
 #endif
diff --git a/arch/h8300/kernel/init_task.c b/arch/h8300/kernel/init_task.c
index cb5dc552da9..089c65ed6eb 100644
--- a/arch/h8300/kernel/init_task.c
+++ b/arch/h8300/kernel/init_task.c
@@ -14,10 +14,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial task structure.
  *
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 56ceb68eb99..fe63b2dc9d0 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1131,7 +1131,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp
 #ifdef CONFIG_NUMA
 	{
 		struct page *page;
-		page = alloc_pages_node(ioc->node == MAX_NUMNODES ?
+		page = alloc_pages_exact_node(ioc->node == MAX_NUMNODES ?
 		                        numa_node_id() : ioc->node, flags,
 		                        get_order(size));
 
diff --git a/arch/ia64/include/asm/kmap_types.h b/arch/ia64/include/asm/kmap_types.h
index 5d1658aa2b3..05d5f999610 100644
--- a/arch/ia64/include/asm/kmap_types.h
+++ b/arch/ia64/include/asm/kmap_types.h
@@ -1,30 +1,12 @@
 #ifndef _ASM_IA64_KMAP_TYPES_H
 #define _ASM_IA64_KMAP_TYPES_H
 
-
 #ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define  __WITH_KM_FENCE
 #endif
 
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
-#undef D
+#undef __WITH_KM_FENCE
 
 #endif /* _ASM_IA64_KMAP_TYPES_H */
diff --git a/arch/ia64/kernel/init_task.c b/arch/ia64/kernel/init_task.c
index 5b0e830c6f3..c475fc281be 100644
--- a/arch/ia64/kernel/init_task.c
+++ b/arch/ia64/kernel/init_task.c
@@ -19,10 +19,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial task structure.
  *
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 8f33a884042..5b17bd40227 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1829,8 +1829,7 @@ ia64_mca_cpu_init(void *cpu_data)
 			data = mca_bootmem();
 			first_time = 0;
 		} else
-			data = page_address(alloc_pages_node(numa_node_id(),
-					GFP_KERNEL, get_order(sz)));
+			data = __get_free_pages(GFP_KERNEL, get_order(sz));
 		if (!data)
 			panic("Could not allocate MCA memory for cpu %d\n",
 					cpu);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 8a06dc48059..bdc176cb5e8 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5595,7 +5595,7 @@ pfm_interrupt_handler(int irq, void *arg)
 		(*pfm_alt_intr_handler->handler)(irq, arg, regs);
 	}
 
-	put_cpu_no_resched();
+	put_cpu();
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index 8eff8c1d40a..6ba72ab42fc 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -98,7 +98,8 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid)
 
 	/* attempt to allocate a granule's worth of cached memory pages */
 
-	page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+	page = alloc_pages_exact_node(nid,
+				GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
 				IA64_GRANULE_SHIFT-PAGE_SHIFT);
 	if (!page) {
 		mutex_unlock(&uc_pool->add_chunk_mutex);
diff --git a/arch/ia64/mm/extable.c b/arch/ia64/mm/extable.c
index e95d5ad9285..c99a41e29fe 100644
--- a/arch/ia64/mm/extable.c
+++ b/arch/ia64/mm/extable.c
@@ -8,7 +8,7 @@
 #include <linux/sort.h>
 
 #include <asm/uaccess.h>
-#include <asm/module.h>
+#include <linux/module.h>
 
 static int cmp_ex(const void *a, const void *b)
 {
@@ -55,7 +55,7 @@ void sort_extable (struct exception_table_entry *start,
 
 static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
 {
-	return (unsigned long)&x->insn + x->insn;
+	return (unsigned long)&x->addr + x->addr;
 }
 
 #ifdef CONFIG_MODULES
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index d876423e4e7..98b684928e1 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -90,7 +90,8 @@ static void *sn_dma_alloc_coherent(struct device *dev, size_t size,
 	 */
 	node = pcibus_to_node(pdev->bus);
 	if (likely(node >=0)) {
-		struct page *p = alloc_pages_node(node, flags, get_order(size));
+		struct page *p = alloc_pages_exact_node(node,
+						flags, get_order(size));
 
 		if (likely(p))
 			cpuaddr = page_address(p);
diff --git a/arch/m32r/include/asm/kmap_types.h b/arch/m32r/include/asm/kmap_types.h
index fa94dc6410e..4cdb5e3a06b 100644
--- a/arch/m32r/include/asm/kmap_types.h
+++ b/arch/m32r/include/asm/kmap_types.h
@@ -2,28 +2,11 @@
 #define __M32R_KMAP_TYPES_H
 
 #ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define  __WITH_KM_FENCE
 #endif
 
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
-#undef D
+#undef __WITH_KM_FENCE
 
 #endif /* __M32R_KMAP_TYPES_H */
diff --git a/arch/m32r/kernel/init_task.c b/arch/m32r/kernel/init_task.c
index 016885c6f26..fce57e5d3f9 100644
--- a/arch/m32r/kernel/init_task.c
+++ b/arch/m32r/kernel/init_task.c
@@ -13,10 +13,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 7daf897292c..b7a78ad429b 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -154,9 +154,9 @@ unsigned long __init zone_sizes_init(void)
 	 *  Use all area of internal RAM.
 	 *  see __alloc_pages()
 	 */
-	NODE_DATA(1)->node_zones->pages_min = 0;
-	NODE_DATA(1)->node_zones->pages_low = 0;
-	NODE_DATA(1)->node_zones->pages_high = 0;
+	NODE_DATA(1)->node_zones->watermark[WMARK_MIN] = 0;
+	NODE_DATA(1)->node_zones->watermark[WMARK_LOW] = 0;
+	NODE_DATA(1)->node_zones->watermark[WMARK_HIGH] = 0;
 
 	return holes;
 }
diff --git a/arch/m32r/platforms/m32104ut/setup.c b/arch/m32r/platforms/m32104ut/setup.c
index 98138b4e922..922fdfdadea 100644
--- a/arch/m32r/platforms/m32104ut/setup.c
+++ b/arch/m32r/platforms/m32104ut/setup.c
@@ -63,7 +63,7 @@ static void shutdown_m32104ut_irq(unsigned int irq)
 	outl(M32R_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type m32104ut_irq_type =
+static struct irq_chip m32104ut_irq_type =
 {
 	.typename = "M32104UT-IRQ",
 	.startup = startup_m32104ut_irq,
diff --git a/arch/m32r/platforms/m32700ut/setup.c b/arch/m32r/platforms/m32700ut/setup.c
index 77b0ae9379e..9c1bc7487c1 100644
--- a/arch/m32r/platforms/m32700ut/setup.c
+++ b/arch/m32r/platforms/m32700ut/setup.c
@@ -69,7 +69,7 @@ static void shutdown_m32700ut_irq(unsigned int irq)
 	outl(M32R_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type m32700ut_irq_type =
+static struct irq_chip m32700ut_irq_type =
 {
 	.typename = "M32700UT-IRQ",
 	.startup = startup_m32700ut_irq,
@@ -146,7 +146,7 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq)
 	outw(PLD_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type m32700ut_pld_irq_type =
+static struct irq_chip m32700ut_pld_irq_type =
 {
 	.typename = "M32700UT-PLD-IRQ",
 	.startup = startup_m32700ut_pld_irq,
@@ -215,7 +215,7 @@ static void shutdown_m32700ut_lanpld_irq(unsigned int irq)
 	outw(PLD_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type m32700ut_lanpld_irq_type =
+static struct irq_chip m32700ut_lanpld_irq_type =
 {
 	.typename = "M32700UT-PLD-LAN-IRQ",
 	.startup = startup_m32700ut_lanpld_irq,
@@ -284,7 +284,7 @@ static void shutdown_m32700ut_lcdpld_irq(unsigned int irq)
 	outw(PLD_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type m32700ut_lcdpld_irq_type =
+static struct irq_chip m32700ut_lcdpld_irq_type =
 {
 	.typename = "M32700UT-PLD-LCD-IRQ",
 	.startup = startup_m32700ut_lcdpld_irq,
diff --git a/arch/m32r/platforms/mappi/setup.c b/arch/m32r/platforms/mappi/setup.c
index 3ec087ff221..fb4b17799b6 100644
--- a/arch/m32r/platforms/mappi/setup.c
+++ b/arch/m32r/platforms/mappi/setup.c
@@ -63,7 +63,7 @@ static void shutdown_mappi_irq(unsigned int irq)
 	outl(M32R_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type mappi_irq_type =
+static struct irq_chip mappi_irq_type =
 {
 	.typename = "MAPPI-IRQ",
 	.startup = startup_mappi_irq,
diff --git a/arch/m32r/platforms/mappi2/setup.c b/arch/m32r/platforms/mappi2/setup.c
index d87969c6356..6a65eda0a05 100644
--- a/arch/m32r/platforms/mappi2/setup.c
+++ b/arch/m32r/platforms/mappi2/setup.c
@@ -70,7 +70,7 @@ static void shutdown_mappi2_irq(unsigned int irq)
 	outl(M32R_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type mappi2_irq_type =
+static struct irq_chip mappi2_irq_type =
 {
 	.typename = "MAPPI2-IRQ",
 	.startup = startup_mappi2_irq,
diff --git a/arch/m32r/platforms/mappi3/setup.c b/arch/m32r/platforms/mappi3/setup.c
index 785b4bd6d9f..9c337aeac94 100644
--- a/arch/m32r/platforms/mappi3/setup.c
+++ b/arch/m32r/platforms/mappi3/setup.c
@@ -70,7 +70,7 @@ static void shutdown_mappi3_irq(unsigned int irq)
 	outl(M32R_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type mappi3_irq_type =
+static struct irq_chip mappi3_irq_type =
 {
 	.typename = "MAPPI3-IRQ",
 	.startup = startup_mappi3_irq,
diff --git a/arch/m32r/platforms/oaks32r/setup.c b/arch/m32r/platforms/oaks32r/setup.c
index 6faa5db68e9..ed865741c38 100644
--- a/arch/m32r/platforms/oaks32r/setup.c
+++ b/arch/m32r/platforms/oaks32r/setup.c
@@ -61,7 +61,7 @@ static void shutdown_oaks32r_irq(unsigned int irq)
 	outl(M32R_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type oaks32r_irq_type =
+static struct irq_chip oaks32r_irq_type =
 {
 	.typename = "OAKS32R-IRQ",
 	.startup = startup_oaks32r_irq,
diff --git a/arch/m32r/platforms/opsput/setup.c b/arch/m32r/platforms/opsput/setup.c
index fab13fd8542..80d68065701 100644
--- a/arch/m32r/platforms/opsput/setup.c
+++ b/arch/m32r/platforms/opsput/setup.c
@@ -70,7 +70,7 @@ static void shutdown_opsput_irq(unsigned int irq)
 	outl(M32R_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type opsput_irq_type =
+static struct irq_chip opsput_irq_type =
 {
 	.typename = "OPSPUT-IRQ",
 	.startup = startup_opsput_irq,
@@ -147,7 +147,7 @@ static void shutdown_opsput_pld_irq(unsigned int irq)
 	outw(PLD_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type opsput_pld_irq_type =
+static struct irq_chip opsput_pld_irq_type =
 {
 	.typename = "OPSPUT-PLD-IRQ",
 	.startup = startup_opsput_pld_irq,
@@ -216,7 +216,7 @@ static void shutdown_opsput_lanpld_irq(unsigned int irq)
 	outw(PLD_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type opsput_lanpld_irq_type =
+static struct irq_chip opsput_lanpld_irq_type =
 {
 	.typename = "OPSPUT-PLD-LAN-IRQ",
 	.startup = startup_opsput_lanpld_irq,
@@ -285,7 +285,7 @@ static void shutdown_opsput_lcdpld_irq(unsigned int irq)
 	outw(PLD_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type opsput_lcdpld_irq_type =
+static struct irq_chip opsput_lcdpld_irq_type =
 {
 	"OPSPUT-PLD-LCD-IRQ",
 	startup_opsput_lcdpld_irq,
diff --git a/arch/m32r/platforms/usrv/setup.c b/arch/m32r/platforms/usrv/setup.c
index 89588d649eb..757302660af 100644
--- a/arch/m32r/platforms/usrv/setup.c
+++ b/arch/m32r/platforms/usrv/setup.c
@@ -61,7 +61,7 @@ static void shutdown_mappi_irq(unsigned int irq)
 	outl(M32R_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type mappi_irq_type =
+static struct irq_chip mappi_irq_type =
 {
 	.typename = "M32700-IRQ",
 	.startup = startup_mappi_irq,
@@ -134,7 +134,7 @@ static void shutdown_m32700ut_pld_irq(unsigned int irq)
 	outw(PLD_ICUCR_ILEVEL7, port);
 }
 
-static struct hw_interrupt_type m32700ut_pld_irq_type =
+static struct irq_chip m32700ut_pld_irq_type =
 {
 	.typename = "USRV-PLD-IRQ",
 	.startup = startup_m32700ut_pld_irq,
diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h
index c843c63d380..3413cc1390e 100644
--- a/arch/m68k/include/asm/kmap_types.h
+++ b/arch/m68k/include/asm/kmap_types.h
@@ -1,21 +1,6 @@
 #ifndef __ASM_M68K_KMAP_TYPES_H
 #define __ASM_M68K_KMAP_TYPES_H
 
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
 #endif	/* __ASM_M68K_KMAP_TYPES_H */
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index ec37fb56c12..72bad65dba3 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -42,10 +42,6 @@
  */
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 union thread_union init_thread_union
 __attribute__((section(".data.init_task"), aligned(THREAD_SIZE)))
        = { INIT_THREAD_INFO(init_task) };
diff --git a/arch/m68knommu/kernel/init_task.c b/arch/m68knommu/kernel/init_task.c
index fe282de1d59..45e97a207fe 100644
--- a/arch/m68knommu/kernel/init_task.c
+++ b/arch/m68knommu/kernel/init_task.c
@@ -14,10 +14,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial task structure.
  *
diff --git a/arch/microblaze/include/asm/kmap_types.h b/arch/microblaze/include/asm/kmap_types.h
index 4d7e222f5dd..25975252d83 100644
--- a/arch/microblaze/include/asm/kmap_types.h
+++ b/arch/microblaze/include/asm/kmap_types.h
@@ -1,29 +1,6 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_KMAP_TYPES_H
 #define _ASM_MICROBLAZE_KMAP_TYPES_H
 
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR,
-};
+#include <asm-generic/kmap_types.h>
 
 #endif /* _ASM_MICROBLAZE_KMAP_TYPES_H */
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 783da855a2e..d6d35b2e5fe 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -963,7 +963,7 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
-CONFIG_SENSORS_MAX6875=y
+CONFIG_EEPROM_MAX6875=y
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 8426d3b9501..fadb351d249 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1849,7 +1849,7 @@ CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h
index 3c0d840e457..a0efc73819e 100644
--- a/arch/mips/include/asm/errno.h
+++ b/arch/mips/include/asm/errno.h
@@ -119,6 +119,8 @@
 #define	EOWNERDEAD	165	/* Owner died */
 #define	ENOTRECOVERABLE	166	/* State not recoverable */
 
+#define	ERFKILL		167	/* Operation not possible due to RF-kill */
+
 #define EDQUOT		1133	/* Quota exceeded */
 
 #ifdef __KERNEL__
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 5dabc870b32..032ca73f181 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,8 +12,6 @@
 #define PIT_CH0			0x40
 #define PIT_CH2			0x42
 
-#define PIT_TICK_RATE		1193182UL
-
 extern spinlock_t i8253_lock;
 
 extern void setup_pit_timer(void);
diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h
index 806aae3c533..58e91ed0388 100644
--- a/arch/mips/include/asm/kmap_types.h
+++ b/arch/mips/include/asm/kmap_types.h
@@ -1,30 +1,12 @@
 #ifndef _ASM_KMAP_TYPES_H
 #define _ASM_KMAP_TYPES_H
 
-
 #ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define  __WITH_KM_FENCE
 #endif
 
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
-#undef D
+#undef __WITH_KM_FENCE
 
 #endif
diff --git a/arch/mips/kernel/init_task.c b/arch/mips/kernel/init_task.c
index 149cd914526..5b457a40c78 100644
--- a/arch/mips/kernel/init_task.c
+++ b/arch/mips/kernel/init_task.c
@@ -11,10 +11,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/mips/sni/eisa.c b/arch/mips/sni/eisa.c
index 7396cd71990..6827feb4de9 100644
--- a/arch/mips/sni/eisa.c
+++ b/arch/mips/sni/eisa.c
@@ -38,7 +38,7 @@ int __init sni_eisa_root_init(void)
 	if (!r)
 		return r;
 
-	eisa_root_dev.dev.driver_data = &eisa_bus_root;
+	dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root);
 
 	if (eisa_root_register(&eisa_bus_root)) {
 		/* A real bridge may have been registered before
diff --git a/arch/mn10300/include/asm/kmap_types.h b/arch/mn10300/include/asm/kmap_types.h
index 3398f9f3560..76d093b58d4 100644
--- a/arch/mn10300/include/asm/kmap_types.h
+++ b/arch/mn10300/include/asm/kmap_types.h
@@ -1,31 +1,6 @@
-/* MN10300 kmap_atomic() slot IDs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
 #ifndef _ASM_KMAP_TYPES_H
 #define _ASM_KMAP_TYPES_H
 
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
 #endif /* _ASM_KMAP_TYPES_H */
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 921942ed1b0..1b0ba5e182b 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -77,8 +77,6 @@ struct pt_regs {
 };
 #endif
 
-extern struct pt_regs *__frame; /* current frame pointer */
-
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13
@@ -90,6 +88,8 @@ extern struct pt_regs *__frame; /* current frame pointer */
 
 #if defined(__KERNEL__)
 
+extern struct pt_regs *__frame;		/* current frame pointer */
+
 #if !defined(__ASSEMBLY__)
 struct task_struct;
 
@@ -107,5 +107,4 @@ extern void user_disable_single_step(struct task_struct *);
 #define profile_pc(regs) ((regs)->pc)
 
 #endif  /*  __KERNEL__  */
-
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h
index 08356c83228..c229d1e3f99 100644
--- a/arch/mn10300/include/asm/setup.h
+++ b/arch/mn10300/include/asm/setup.h
@@ -11,7 +11,8 @@
 #ifndef _ASM_SETUP_H
 #define _ASM_SETUP_H
 
+#ifdef __KERNEL__
 extern void __init unit_setup(void);
 extern void __init unit_init_IRQ(void);
-
+#endif
 #endif /* _ASM_SETUP_H */
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
index 5ac3566f8c9..80d423b80af 100644
--- a/arch/mn10300/kernel/init_task.c
+++ b/arch/mn10300/kernel/init_task.c
@@ -20,9 +20,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/parisc/include/asm/errno.h b/arch/parisc/include/asm/errno.h
index e2f3ddc796b..9992abdd782 100644
--- a/arch/parisc/include/asm/errno.h
+++ b/arch/parisc/include/asm/errno.h
@@ -120,5 +120,6 @@
 #define EOWNERDEAD	254	/* Owner died */
 #define ENOTRECOVERABLE	255	/* State not recoverable */
 
+#define	ERFKILL		256	/* Operation not possible due to RF-kill */
 
 #endif
diff --git a/arch/parisc/include/asm/kmap_types.h b/arch/parisc/include/asm/kmap_types.h
index 806aae3c533..58e91ed0388 100644
--- a/arch/parisc/include/asm/kmap_types.h
+++ b/arch/parisc/include/asm/kmap_types.h
@@ -1,30 +1,12 @@
 #ifndef _ASM_KMAP_TYPES_H
 #define _ASM_KMAP_TYPES_H
 
-
 #ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define  __WITH_KM_FENCE
 #endif
 
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
-#undef D
+#undef __WITH_KM_FENCE
 
 #endif
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index 1e25a45d64c..82974b20fc1 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -36,10 +36,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial task structure.
  *
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index cdc9a6ff4be..9fb344d5a86 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,10 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	bool
+	default y
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
@@ -89,10 +93,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y
 
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
 config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
@@ -125,6 +125,7 @@ config PPC
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
+	select GENERIC_ATOMIC64 if PPC32
 
 config EARLY_PRINTK
 	bool
@@ -296,9 +297,19 @@ config IOMMU_VMERGE
 config IOMMU_HELPER
 	def_bool PPC64
 
+config SWIOTLB
+	bool "SWIOTLB support"
+	default n
+	select IOMMU_HELPER
+	---help---
+	  Support for IO bounce buffering for systems without an IOMMU.
+	  This allows us to DMA to the full physical address space on
+	  platforms where the size of a physical address is larger
+	  than the bus address.  Not all platforms support this.
+
 config PPC_NEED_DMA_SYNC_OPS
 	def_bool y
-	depends on NOT_COHERENT_CACHE
+	depends on (NOT_COHERENT_CACHE || SWIOTLB)
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index a1098e23221..d79a902d155 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,6 +41,19 @@ config HCALL_STATS
 	  This option will add a small amount of overhead to all hypervisor
 	  calls.
 
+config PPC_EMULATED_STATS
+	bool "Emulated instructions tracking"
+	depends on DEBUG_FS
+	help
+	  Adds code to keep track of the number of instructions that are
+	  emulated by the in-kernel emulator. Counters for the various classes
+	  of emulated instructions are available under
+	  powerpc/emulated_instructions/ in the root of the debugfs file
+	  system. Optionally (controlled by
+	  powerpc/emulated_instructions/do_warn in debugfs), rate-limited
+	  warnings can be printed to the console when instructions are
+	  emulated.
+
 config CODE_PATCHING_SELFTEST
 	bool "Run self-tests of the code-patching code."
 	depends on DEBUG_KERNEL
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 551fc58c05c..bc35f4e2b81 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -142,6 +142,7 @@ head-$(CONFIG_FSL_BOOKE)	:= arch/powerpc/kernel/head_fsl_booke.o
 
 head-$(CONFIG_PPC64)		+= arch/powerpc/kernel/entry_64.o
 head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
+head-$(CONFIG_ALTIVEC)		+= arch/powerpc/kernel/vector.o
 
 core-y				+= arch/powerpc/kernel/ \
 				   arch/powerpc/mm/ \
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 53a7a625590..910944edd88 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -164,9 +164,21 @@
 		device_type = "soc";
 		compatible = "fsl,mpc8641-soc", "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
-		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <33333333>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c1: i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 1569117e5dd..0f4c9ec2c3a 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -163,9 +163,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
-		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <33333333>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c1: i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 6582dbd36da..217f8aa6672 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -128,9 +128,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
-		reg = <0xfef00000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <33333333>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c1: i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index c9cfd374bff..bdb7fc0fa33 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -56,6 +56,19 @@
 		ranges = <0x00000000 0xfdf00000 0x00100000>;
 		bus-frequency = <0>;				/* Fixed by bootwrapper */
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 57c595bf107..436c9c671dd 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -249,6 +249,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
 			#address-cells = <1>;
@@ -369,7 +371,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x11 AD17 */
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 4319bd70a58..9a0952f74b8 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -221,6 +221,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
@@ -327,7 +329,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x10 AD16 (USB) */
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 1ae38f0ddef..e3eeaeda918 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -278,7 +278,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x10 - SATA */
@@ -301,7 +300,6 @@
 	};
 
 	pci1: pci@e0008600 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x0E - MiniPCI Slot */
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 662abe1fb80..eb732115f01 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -227,7 +227,6 @@
 	};
 
 	pci0: pci@e0008600 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x0F - PCI Slot */
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index d9f0a2325fa..a2553a6f900 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -286,7 +286,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -348,7 +347,6 @@
 	};
 
 	pci1: pci@e0008600 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 6e34f170fa6..39ff4c829ca 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -289,6 +289,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <396000000>;
+		fsl,qe-num-riscs = <2>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
@@ -410,7 +412,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 37b789510d6..6315d6fcc58 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -198,6 +198,8 @@
 			clock-frequency = <0>;
 			bus-frequency = <0>;
 			brg-frequency = <0>;
+			fsl,qe-num-riscs = <2>;
+			fsl,qe-num-snums = <28>;
 
 			muram@10000 {
 				#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 963708017e6..67bb372c945 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -383,7 +383,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 651ff2f9db2..a955a577db8 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -367,7 +367,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d6f208b8297..d266ddbfc28 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -397,7 +397,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index b31c5041350..e781ad2f1f8 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -51,9 +51,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
-		reg = <0xffe00000 0x1000>;
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8536-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -321,7 +333,6 @@
 	};
 
 	pci0: pci@ffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
@@ -346,7 +357,6 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -383,7 +393,6 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -420,7 +429,6 @@
 	};
 
 	pci3: pcie@ffe0b000 {
-		cell-index = <3>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index ddd67be10b0..9dc292962a9 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -55,9 +55,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -258,7 +270,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index e45097f44fb..9a3ad311aed 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -55,9 +55,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8541-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -272,7 +284,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -344,7 +355,6 @@
 	};
 
 	pci1: pci@e0009000 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7c6932be019..98e94b46566 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -57,9 +57,21 @@
 		compatible = "simple-bus";
 
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8544-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -274,7 +286,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
@@ -306,7 +317,6 @@
 	};
 
 	pci1: pcie@e0009000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -343,7 +353,6 @@
 	};
 
 	pci2: pcie@e000a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -380,7 +389,6 @@
 	};
 
 	pci3: pcie@e000b000 {
-		cell-index = <3>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 804e9035329..475be1433fe 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -60,9 +60,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8548-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -328,7 +340,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x4 (PCIX Slot 2) */
@@ -478,7 +489,6 @@
 	};
 
 	pci1: pci@e0009000 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -503,7 +513,6 @@
 	};
 
 	pci2: pcie@e000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 9484f0729b1..065b2f093de 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -55,9 +55,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8555-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -272,7 +284,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -344,7 +355,6 @@
 	};
 
 	pci1: pci@e0009000 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index cc2acf87d02..a5bb1ec70a5 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -55,9 +55,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <330000000>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -291,7 +303,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9d52e3b2504..00c2bbda701 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -26,6 +26,7 @@
 		serial1 = &serial1;
 		pci0 = &pci0;
 		pci1 = &pci1;
+		rapidio0 = &rio0;
 	};
 
 	cpus {
@@ -62,9 +63,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,8568-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -275,6 +288,22 @@
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		par_io@e0100 {
 			reg = <0xe0100 0x100>;
 			device_type = "par_io";
@@ -349,6 +378,8 @@
 		reg = <0xe0080000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <396000000>;
+		fsl,qe-num-riscs = <2>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
@@ -459,7 +490,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x12 AD18 */
@@ -490,7 +520,6 @@
 
 	/* PCI Express */
 	pci1: pcie@e000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -526,4 +555,20 @@
 				  0x0 0x800000>;
 		};
 	};
+
+	rio0: rapidio@e00c00000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
+		reg = <0xe00c0000 0x20000>;
+		ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
+		interrupts = <48 2 /* error     */
+			      49 2 /* bell_outb */
+			      50 2 /* bell_inb  */
+			      53 2 /* msg1_tx   */
+			      54 2 /* msg1_rx   */
+			      55 2 /* msg2_tx   */
+			      56 2 /* msg2_rx   */>;
+		interrupt-parent = <&mpic>;
+	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
new file mode 100644
index 00000000000..39c2927503c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -0,0 +1,583 @@
+/*
+ * MPC8569E MDS Device Tree Source
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8569EMDS";
+	compatible = "fsl,MPC8569EMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci1 = &pci1;
+		rapidio0 = &rio0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8569@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0xf0000000 0x04000000
+			  0x3 0x0 0xfc000000 0x00008000
+			  0x4 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		bcsr@1,0 {
+			compatible = "fsl,mpc8569mds-bcsr";
+			reg = <1 0 0x8000>;
+		};
+
+		nand@3,0 {
+			compatible = "fsl,mpc8569-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <3 0 0x8000>;
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <5 0 0x8000>;
+		};
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8569-immr", "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8569-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8569-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x8>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8569-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x100>;
+			ranges = <0x0 0xe0100 0x100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			qe_pio_e: gpio-controller@80 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x80 0x18>;
+				gpio-controller;
+			};
+
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x0  0x1  0x0  0x3  0x0	/* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x1  0x1  0x0  0x3  0x0	/* ENET1_TXD1_SER1_TXD1 */
+					0x0  0x2  0x1  0x0  0x1  0x0	/* ENET1_TXD2_SER1_TXD2 */
+					0x0  0x3  0x1  0x0  0x2  0x0	/* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x3  0x0	/* ENET1_RXD0_SER1_RXD0	*/
+					0x0  0x7  0x2  0x0  0x1  0x0	/* ENET1_RXD1_SER1_RXD1	*/
+					0x0  0x8  0x2  0x0  0x2  0x0	/* ENET1_RXD2_SER1_RXD2	*/
+					0x0  0x9  0x2  0x0  0x2  0x0	/* ENET1_RXD3_SER1_RXD3	*/
+					0x0  0x4  0x1  0x0  0x2  0x0	/* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xc  0x2  0x0  0x3  0x0	/* ENET1_RX_DV_SER1_CTS_B */
+					0x2  0x8  0x2  0x0  0x1  0x0	/* ENET1_GRXCLK	*/
+					0x2  0x14 0x1  0x0  0x2  0x0>;	/* ENET1_GTXCLK	*/
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x0  0xe  0x1  0x0  0x2  0x0	/* ENET2_TXD0_SER2_TXD0 */
+					0x0  0xf  0x1  0x0  0x2  0x0	/* ENET2_TXD1_SER2_TXD1 */
+					0x0  0x10 0x1  0x0  0x1  0x0	/* ENET2_TXD2_SER2_TXD2 */
+					0x0  0x11 0x1  0x0  0x1  0x0	/* ENET2_TXD3_SER2_TXD3 */
+					0x0  0x14 0x2  0x0  0x2  0x0	/* ENET2_RXD0_SER2_RXD0	*/
+					0x0  0x15 0x2  0x0  0x1  0x0	/* ENET2_RXD1_SER2_RXD1	*/
+					0x0  0x16 0x2  0x0  0x1  0x0	/* ENET2_RXD2_SER2_RXD2	*/
+					0x0  0x17 0x2  0x0  0x1  0x0	/* ENET2_RXD3_SER2_RXD3	*/
+					0x0  0x12 0x1  0x0  0x2  0x0	/* ENET2_TX_EN_SER2_RTS_B */
+					0x0  0x1a 0x2  0x0  0x3  0x0	/* ENET2_RX_DV_SER2_CTS_B */
+					0x2  0x3  0x2  0x0  0x1  0x0	/* ENET2_GRXCLK	*/
+					0x2  0x2 0x1  0x0  0x2  0x0>;	/* ENET2_GTXCLK	*/
+			};
+
+			pio3: ucc_pin@03 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x1d 0x1  0x0  0x2  0x0	/* ENET3_TXD0_SER3_TXD0 */
+					0x0  0x1e 0x1  0x0  0x3  0x0	/* ENET3_TXD1_SER3_TXD1 */
+					0x0  0x1f 0x1  0x0  0x2  0x0	/* ENET3_TXD2_SER3_TXD2 */
+					0x1  0x0  0x1  0x0  0x3  0x0	/* ENET3_TXD3_SER3_TXD3 */
+					0x1  0x3  0x2  0x0  0x3  0x0	/* ENET3_RXD0_SER3_RXD0	*/
+					0x1  0x4  0x2  0x0  0x1  0x0	/* ENET3_RXD1_SER3_RXD1	*/
+					0x1  0x5  0x2  0x0  0x2  0x0	/* ENET3_RXD2_SER3_RXD2	*/
+					0x1  0x6  0x2  0x0  0x3  0x0	/* ENET3_RXD3_SER3_RXD3	*/
+					0x1  0x1  0x1  0x0  0x1  0x0	/* ENET3_TX_EN_SER3_RTS_B */
+					0x1  0x9  0x2  0x0  0x3  0x0	/* ENET3_RX_DV_SER3_CTS_B */
+					0x2  0x9  0x2  0x0  0x2  0x0	/* ENET3_GRXCLK	*/
+					0x2  0x19 0x1  0x0  0x2  0x0>;	/* ENET3_GTXCLK	*/
+			};
+
+			pio4: ucc_pin@04 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x1  0xc  0x1  0x0  0x2  0x0	/* ENET4_TXD0_SER4_TXD0 */
+					0x1  0xd  0x1  0x0  0x2  0x0	/* ENET4_TXD1_SER4_TXD1 */
+					0x1  0xe  0x1  0x0  0x1  0x0	/* ENET4_TXD2_SER4_TXD2 */
+					0x1  0xf  0x1  0x0  0x2  0x0	/* ENET4_TXD3_SER4_TXD3 */
+					0x1  0x12 0x2  0x0  0x2  0x0	/* ENET4_RXD0_SER4_RXD0	*/
+					0x1  0x13 0x2  0x0  0x1  0x0	/* ENET4_RXD1_SER4_RXD1	*/
+					0x1  0x14 0x2  0x0  0x1  0x0	/* ENET4_RXD2_SER4_RXD2	*/
+					0x1  0x15 0x2  0x0  0x2  0x0	/* ENET4_RXD3_SER4_RXD3	*/
+					0x1  0x10 0x1  0x0  0x2  0x0	/* ENET4_TX_EN_SER4_RTS_B */
+					0x1  0x18 0x2  0x0  0x3  0x0	/* ENET4_RX_DV_SER4_CTS_B */
+					0x2  0x11 0x2  0x0  0x2  0x0	/* ENET4_GRXCLK	*/
+					0x2  0x18 0x1  0x0  0x2  0x0>;	/* ENET4_GTXCLK	*/
+			};
+		};
+	};
+
+	qe@e0080000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0080000 0x40000>;
+		reg = <0xe0080000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <4>;
+		fsl,qe-num-snums = <46>;
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <46 2 46 2>; //high:30 low:30
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@4c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+			reg = <0x4c0 0x40>;
+			cell-index = <0>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			gpios = <&qe_pio_e 30 0>;
+			mode = "cpu-qe";
+
+			serial-flash@0 {
+				compatible = "stm,m25p40";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+			};
+		};
+
+		spi@500 {
+			cell-index = <1>;
+			compatible = "fsl,spi";
+			reg = <0x500 0x40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		enet0: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@07 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x7>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@01 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy2: ethernet-phy@02 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy3: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet2: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <3>;
+			reg = <0x2200 0x200>;
+			interrupts = <34>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio3>;
+			phy-handle = <&qe_phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <2>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet3: ucc@3200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <4>;
+			reg = <0x3200 0x200>;
+			interrupts = <35>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio4>;
+			phy-handle = <&qe_phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x20000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0x20000>;
+			};
+		};
+
+	};
+
+	/* PCI Express */
+	pci1: pcie@e000a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			00000 0x0 0x0 0x1 &mpic 0x0 0x1
+			00000 0x0 0x0 0x2 &mpic 0x1 0x1
+			00000 0x0 0x0 0x3 &mpic 0x2 0x1
+			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+		clock-frequency = <33333333>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
+		};
+	};
+
+	rio0: rapidio@e00c00000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
+		reg = <0xe00c0000 0x20000>;
+		ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
+		interrupts = <48 2 /* error     */
+			      49 2 /* bell_outb */
+			      50 2 /* bell_inb  */
+			      53 2 /* msg1_tx   */
+			      54 2 /* msg1_rx   */
+			      55 2 /* msg2_tx   */
+			      56 2 /* msg2_rx   */>;
+		interrupt-parent = <&mpic>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 6e79a416908..cafc1285c14 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -182,9 +182,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0 0xffe00000 0x100000>;
-		reg = <0 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8572-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -514,7 +526,6 @@
 	};
 
 	pci0: pcie@ffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -724,7 +735,6 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -761,7 +771,6 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index dbd81a76474..f6365db3b97 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -182,9 +182,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xf 0xffe00000 0x100000>;
-		reg = <0xf 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8572-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -514,7 +526,6 @@
 	};
 
 	pci0: pcie@fffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -522,7 +533,7 @@
 		#address-cells = <3>;
 		reg = <0xf 0xffe08000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x00000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
@@ -649,8 +660,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
@@ -660,8 +671,8 @@
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				#size-cells = <2>;
 				#address-cells = <3>;
-				ranges = <0x2000000 0x0 0xc0000000
-					  0x2000000 0x0 0xc0000000
+				ranges = <0x2000000 0x0 0xe0000000
+					  0x2000000 0x0 0xe0000000
 					  0x0 0x20000000
 
 					  0x1000000 0x0 0x0
@@ -724,7 +735,6 @@
 	};
 
 	pci1: pcie@fffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -732,7 +742,7 @@
 		#address-cells = <3>;
 		reg = <0xf 0xffe09000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
@@ -750,8 +760,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
@@ -761,7 +771,6 @@
 	};
 
 	pci2: pcie@fffe0a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -769,7 +778,7 @@
 		#address-cells = <3>;
 		reg = <0xf 0xffe0a000 0 0x1000>;
 		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
@@ -787,8 +796,8 @@
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 2bc0c718965..5bd1011fde9 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -59,9 +59,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
-		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8572-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -238,7 +250,6 @@
 	};
 
 	pci0: pcie@ffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -448,7 +459,6 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 159cb3a875f..0efc3456e29 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -58,7 +58,6 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
-		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		L2: l2-cache-controller@20000 {
@@ -196,7 +195,6 @@
 	};
 
 	pci2: pcie@ffe0a000 {
-		cell-index = <2>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1bd3ebe1143..cfc2c60d1f5 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -112,9 +112,21 @@
 		device_type = "soc";
 		compatible = "fsl,mpc8610-immr", "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8610-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -316,7 +328,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8610-pci";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -346,7 +357,6 @@
 	};
 
 	pci1: pcie@e000a000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index d72beb19246..848320e4d3c 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -114,9 +114,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xffe00000 0x00100000>;
-		reg = <0xffe00000 0x00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -357,7 +369,6 @@
 	};
 
 	pci0: pcie@ffe08000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -566,7 +577,6 @@
 	};
 
 	pci1: pcie@ffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
new file mode 100644
index 00000000000..8be8e701e1d
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
@@ -0,0 +1,609 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8641HPCN";
+	compatible = "fsl,mpc8641hpcn";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;	// 1G at 0x0
+	};
+
+	localbus@fffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8641-localbus", "simple-bus";
+		reg = <0x0f 0xffe05000 0x0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0 0 0xf 0xef800000 0x00800000
+			  2 0 0xf 0xffdf8000 0x00008000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00300000>;
+			};
+			partition@300000 {
+				label = "firmware b";
+				reg = <0x00300000 0x00100000>;
+				read-only;
+			};
+			partition@400000 {
+				label = "fs";
+				reg = <0x00400000 0x00300000>;
+			};
+			partition@700000 {
+				label = "firmware a";
+				reg = <0x00700000 0x00100000>;
+				read-only;
+			};
+		};
+	};
+
+	soc8641@fffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
+		bus-frequency = <0>;
+
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 1>;
+					reg = <0>;
+					device_type = "ethernet-phy";
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 1>;
+					reg = <1>;
+					device_type = "ethernet-phy";
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 1>;
+					reg = <2>;
+					device_type = "ethernet-phy";
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 1>;
+					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <28 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8641-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@fffe08000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x0f 0xffe08000 0x0 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
+			0x8800 0 0 1 &mpic 2 1
+			0x8800 0 0 2 &mpic 3 1
+			0x8800 0 0 3 &mpic 4 1
+			0x8800 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			0x8900 0 0 1 &mpic 2 1
+			0x8900 0 0 2 &mpic 3 1
+			0x8900 0 0 3 &mpic 4 1
+			0x8900 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			0x8a00 0 0 1 &mpic 2 1
+			0x8a00 0 0 2 &mpic 3 1
+			0x8a00 0 0 3 &mpic 4 1
+			0x8a00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			0x8b00 0 0 1 &mpic 2 1
+			0x8b00 0 0 2 &mpic 3 1
+			0x8b00 0 0 3 &mpic 4 1
+			0x8b00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			0x8c00 0 0 1 &mpic 2 1
+			0x8c00 0 0 2 &mpic 3 1
+			0x8c00 0 0 3 &mpic 4 1
+			0x8c00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			0x8d00 0 0 1 &mpic 2 1
+			0x8d00 0 0 2 &mpic 3 1
+			0x8d00 0 0 3 &mpic 4 1
+			0x8d00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			0x8e00 0 0 1 &mpic 2 1
+			0x8e00 0 0 2 &mpic 3 1
+			0x8e00 0 0 3 &mpic 4 1
+			0x8e00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			0x8f00 0 0 1 &mpic 2 1
+			0x8f00 0 0 2 &mpic 3 1
+			0x8f00 0 0 3 &mpic 4 1
+			0x8f00 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
+			0x9000 0 0 1 &mpic 3 1
+			0x9000 0 0 2 &mpic 4 1
+			0x9000 0 0 3 &mpic 1 1
+			0x9000 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			0x9100 0 0 1 &mpic 3 1
+			0x9100 0 0 2 &mpic 4 1
+			0x9100 0 0 3 &mpic 1 1
+			0x9100 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			0x9200 0 0 1 &mpic 3 1
+			0x9200 0 0 2 &mpic 4 1
+			0x9200 0 0 3 &mpic 1 1
+			0x9200 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			0x9300 0 0 1 &mpic 3 1
+			0x9300 0 0 2 &mpic 4 1
+			0x9300 0 0 3 &mpic 1 1
+			0x9300 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			0x9400 0 0 1 &mpic 3 1
+			0x9400 0 0 2 &mpic 4 1
+			0x9400 0 0 3 &mpic 1 1
+			0x9400 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			0x9500 0 0 1 &mpic 3 1
+			0x9500 0 0 2 &mpic 4 1
+			0x9500 0 0 3 &mpic 1 1
+			0x9500 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			0x9600 0 0 1 &mpic 3 1
+			0x9600 0 0 2 &mpic 4 1
+			0x9600 0 0 3 &mpic 1 1
+			0x9600 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			0x9700 0 0 1 &mpic 3 1
+			0x9700 0 0 2 &mpic 4 1
+			0x9700 0 0 3 &mpic 1 1
+			0x9700 0 0 4 &mpic 2 1
+
+			// IDSEL 0x1c  USB
+			0xe000 0 0 1 &i8259 12 2
+			0xe100 0 0 2 &i8259 9 2
+			0xe200 0 0 3 &i8259 10 2
+			0xe300 0 0 4 &i8259 11 2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0 0 1 &i8259 6 2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0 0 1 &i8259 7 2
+			0xf100 0 0 1 &i8259 7 2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0 0 1 &i8259 14 2
+			0xf900 0 0 1 &i8259 5 2
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00010000>;
+			uli1575@0 {
+				reg = <0 0 0 0 0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x02000000 0x0 0xe0000000
+					  0x02000000 0x0 0xe0000000
+					  0x0 0x20000000
+					  0x01000000 0x0 0x00000000
+					  0x01000000 0x0 0x00000000
+					  0x0 0x00010000>;
+				isa@1e {
+					device_type = "isa";
+					#interrupt-cells = <2>;
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+					interrupt-parent = <&i8259>;
+
+					i8259: interrupt-controller@20 {
+						reg = <1 0x20 2
+						       1 0xa0 2
+						       1 0x4d0 2>;
+						interrupt-controller;
+						device_type = "interrupt-controller";
+						#address-cells = <0>;
+						#interrupt-cells = <2>;
+						compatible = "chrp,iic";
+						interrupts = <9 2>;
+						interrupt-parent = <&mpic>;
+					};
+
+					i8042@60 {
+						#size-cells = <0>;
+						#address-cells = <1>;
+						reg = <1 0x60 1 1 0x64 1>;
+						interrupts = <1 3 12 3>;
+						interrupt-parent =
+							<&i8259>;
+
+						keyboard@0 {
+							reg = <0>;
+							compatible = "pnpPNP,303";
+						};
+
+						mouse@1 {
+							reg = <1>;
+							compatible = "pnpPNP,f03";
+						};
+					};
+
+					rtc@70 {
+						compatible =
+							"pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+
+					gpio@400 {
+						reg = <1 0x400 0x80>;
+					};
+				};
+			};
+		};
+
+	};
+
+	pci1: pcie@fffe09000 {
+		cell-index = <1>;
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x0f 0xffe09000 0x0 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0000 0 0 1 &mpic 4 1
+			0x0000 0 0 2 &mpic 5 1
+			0x0000 0 0 3 &mpic 6 1
+			0x0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00010000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
new file mode 100644
index 00000000000..11019142813
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -0,0 +1,704 @@
+/*
+ * P2020 DS Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000
+			  0x4 0x0 0x0 0xffa40000 0x00040000
+			  0x5 0x0 0x0 0xffa80000 0x00040000
+			  0x6 0x0 0x0 0xffac0000 0x00040000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			ramdisk@0 {
+				reg = <0x0 0x03000000>;
+				read-only;
+			};
+
+			diagnostic@3000000 {
+				reg = <0x03000000 0x00e00000>;
+				read-only;
+			};
+
+			dink@3e00000 {
+				reg = <0x03e00000 0x00200000>;
+				read-only;
+			};
+
+			kernel@4000000 {
+				reg = <0x04000000 0x00400000>;
+				read-only;
+			};
+
+			jffs2@4400000 {
+				reg = <0x04400000 0x03b00000>;
+			};
+
+			dtb@7f00000 {
+				reg = <0x07f00000 0x00080000>;
+				read-only;
+			};
+
+			u-boot@7f80000 {
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			u-boot@0 {
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			jffs2@2000000 {
+				reg = <0x02000000 0x10000000>;
+			};
+
+			ramdisk@12000000 {
+				reg = <0x12000000 0x08000000>;
+				read-only;
+			};
+
+			kernel@1a000000 {
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			dtb@1e000000 {
+				reg = <0x1e000000 0x01000000>;
+				read-only;
+			};
+
+			empty@1f000000 {
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		nand@4,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x4 0x0 0x40000>;
+		};
+
+		nand@5,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x5 0x0 0x40000>;
+		};
+
+		nand@6,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x6 0x0 0x40000>;
+		};
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0 0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2, 512k
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe08000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			// IDSEL 0x11 func 0 - PCI slot 1
+			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 1 - PCI slot 1
+			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 2 - PCI slot 1
+			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 3 - PCI slot 1
+			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 4 - PCI slot 1
+			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 5 - PCI slot 1
+			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 6 - PCI slot 1
+			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 7 - PCI slot 1
+			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			uli1575@0 {
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x2000000 0x0 0xa0000000
+					  0x2000000 0x0 0xa0000000
+					  0x0 0x20000000
+
+					  0x1000000 0x0 0x0
+					  0x1000000 0x0 0x0
+					  0x0 0x10000>;
+				isa@1e {
+					device_type = "isa";
+					#interrupt-cells = <2>;
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0x0 0x0 0x0 0x0>;
+					ranges = <0x1 0x0 0x1000000 0x0 0x0
+						  0x1000>;
+					interrupt-parent = <&i8259>;
+
+					i8259: interrupt-controller@20 {
+						reg = <0x1 0x20 0x2
+						       0x1 0xa0 0x2
+						       0x1 0x4d0 0x2>;
+						interrupt-controller;
+						device_type = "interrupt-controller";
+						#address-cells = <0>;
+						#interrupt-cells = <2>;
+						compatible = "chrp,iic";
+						interrupts = <4 1>;
+						interrupt-parent = <&mpic>;
+					};
+
+					i8042@60 {
+						#size-cells = <0>;
+						#address-cells = <1>;
+						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+						interrupts = <1 3 12 3>;
+						interrupt-parent =
+							<&i8259>;
+
+						keyboard@0 {
+							reg = <0x0>;
+							compatible = "pnpPNP,303";
+						};
+
+						mouse@1 {
+							reg = <0x1>;
+							compatible = "pnpPNP,f03";
+						};
+					};
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <0x1 0x70 0x2>;
+					};
+
+					gpio@400 {
+						reg = <0x1 0x400 0x80>;
+					};
+				};
+			};
+		};
+
+	};
+
+	pci2: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index a36dbbc4869..5fb6f6684b0 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -278,7 +278,6 @@
 	};
 
 	pci0: pci@e0008500 {
-		cell-index = <1>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index b1f1416ac99..9eefe00ed25 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -151,10 +151,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x00000000 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 		compatible = "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -350,7 +362,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x01 (PCI-X slot) @66MHz */
@@ -380,7 +391,6 @@
 	};
 
 	pci2: pcie@e000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index c4564b81e47..239d57a55cf 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -57,9 +57,21 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xff700000 0x00100000>;
-		reg = <0xff700000 0x00100000>;
 		clock-frequency = <0>;
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8560-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -296,7 +308,6 @@
 	};
 
 	pci0: pci@ff708000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index e3e914e78ca..ee5538feb45 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -126,9 +126,21 @@
 		device_type = "soc";
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xf8000000 0x00100000>;
-		reg = <0xf8000000 0x00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 
+		mcm-law@0 {
+			compatible = "fsl,mcm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		mcm@1000 {
+			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -371,7 +383,6 @@
 	};
 
 	pci0: pcie@f8008000 {
-		cell-index = <0>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -410,7 +421,6 @@
 	};
 
 	pci1: pcie@f8009000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 43cc68bd319..739dd0da241 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -199,6 +199,28 @@
 					};
 				};
 
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00084000>;
+						};
+						partition@84000 {
+							label = "user";
+							reg = <0x00000000 0x01f7c000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
index 7a6ae75a1e5..feb4ef6bd14 100644
--- a/arch/powerpc/boot/dts/socrates.dts
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -55,10 +55,22 @@
 		device_type = "soc";
 
 		ranges = <0x00000000 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M
 		bus-frequency = <0>;		// Filled in by U-Boot
 		compatible = "fsl,mpc8544-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8544-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -314,7 +326,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index ea6b15152de..b670d03fbcd 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -52,10 +52,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0 0xfdf00000 0x100000>;
-		reg = <0xfdf00000 0x1000>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8560-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -251,7 +263,6 @@
 	};
 
 	pci0: pci@fdf08000 {
-		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index b6f1fc6eb96..71347537b83 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -54,10 +54,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8540-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -266,7 +278,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index fa6a3d54a8a..b30f63753d4 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -53,10 +53,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8541-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -288,7 +300,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 00f7ed7a245..61f25e15fd6 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -55,10 +55,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xa0000000 0x100000>;
-		reg = <0xa0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8548-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -419,7 +431,6 @@
 	};
 
 	pci0: pci@a0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -441,7 +452,6 @@
 	};
 
 	pci1: pcie@a000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 (PEX) */
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 673e4a778ac..025759c7c95 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -55,10 +55,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8548-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -419,7 +431,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -441,7 +452,6 @@
 	};
 
 	pci1: pcie@e000a000 {
-		cell-index = <2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 (PEX) */
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 6a99f1eef7a..95e28738183 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -53,10 +53,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8555-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -288,7 +300,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index b6c2d71defd..ff70580a8f4 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -55,10 +55,22 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
-		reg = <0xe0000000 0x200>;
 		bus-frequency = <0>;
 		compatible = "fsl,mpc8560-immr", "simple-bus";
 
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
 		memory-controller@2000 {
 			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
@@ -359,7 +371,6 @@
 	};
 
 	pci0: pci@e0008000 {
-		cell-index = <0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/virtex440-ml510.dts b/arch/powerpc/boot/dts/virtex440-ml510.dts
new file mode 100644
index 00000000000..81a8dc2c636
--- /dev/null
+++ b/arch/powerpc/boot/dts/virtex440-ml510.dts
@@ -0,0 +1,465 @@
+/*
+ * Xilinx ML510 Reference Design support
+ *
+ * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
+ * The reference design contains a bug which prevent PCI DMA from working
+ * properly.  A description of the bug is given in the plbv46_pci section. It
+ * needs to be fixed by the user until Xilinx updates their reference design.
+ *
+ * Copyright 2009, Roderick Colenbrander
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,ml510-ref-design", "xlnx,virtex440";
+	dcr-parent = <&ppc440_0>;
+	DDR2_SDRAM_DIMM0: memory@0 {
+		device_type = "memory";
+		reg = < 0x0 0x20000000 >;
+	} ;
+	alias {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyS0 root=/dev/ram";
+		linux,stdout-path = "/plb@0/serial@83e00000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		ppc440_0: cpu@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-frequency = <300000000>;
+			compatible = "PowerPC,440", "ibm,ppc440";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			dcr-access-method = "native";
+			dcr-controller ;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "PowerPC,440";
+			reg = <0>;
+			timebase-frequency = <300000000>;
+			xlnx,apu-control = <0x2000>;
+			xlnx,apu-udi-0 = <0x0>;
+			xlnx,apu-udi-1 = <0x0>;
+			xlnx,apu-udi-10 = <0x0>;
+			xlnx,apu-udi-11 = <0x0>;
+			xlnx,apu-udi-12 = <0x0>;
+			xlnx,apu-udi-13 = <0x0>;
+			xlnx,apu-udi-14 = <0x0>;
+			xlnx,apu-udi-15 = <0x0>;
+			xlnx,apu-udi-2 = <0x0>;
+			xlnx,apu-udi-3 = <0x0>;
+			xlnx,apu-udi-4 = <0x0>;
+			xlnx,apu-udi-5 = <0x0>;
+			xlnx,apu-udi-6 = <0x0>;
+			xlnx,apu-udi-7 = <0x0>;
+			xlnx,apu-udi-8 = <0x0>;
+			xlnx,apu-udi-9 = <0x0>;
+			xlnx,dcr-autolock-enable = <0x1>;
+			xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
+			xlnx,dcu-rd-noncache-plb-prio = <0x0>;
+			xlnx,dcu-rd-touch-plb-prio = <0x0>;
+			xlnx,dcu-rd-urgent-plb-prio = <0x0>;
+			xlnx,dcu-wr-flush-plb-prio = <0x0>;
+			xlnx,dcu-wr-store-plb-prio = <0x0>;
+			xlnx,dcu-wr-urgent-plb-prio = <0x0>;
+			xlnx,dma0-control = <0x0>;
+			xlnx,dma0-plb-prio = <0x0>;
+			xlnx,dma0-rxchannelctrl = <0x1010000>;
+			xlnx,dma0-rxirqtimer = <0x3ff>;
+			xlnx,dma0-txchannelctrl = <0x1010000>;
+			xlnx,dma0-txirqtimer = <0x3ff>;
+			xlnx,dma1-control = <0x0>;
+			xlnx,dma1-plb-prio = <0x0>;
+			xlnx,dma1-rxchannelctrl = <0x1010000>;
+			xlnx,dma1-rxirqtimer = <0x3ff>;
+			xlnx,dma1-txchannelctrl = <0x1010000>;
+			xlnx,dma1-txirqtimer = <0x3ff>;
+			xlnx,dma2-control = <0x0>;
+			xlnx,dma2-plb-prio = <0x0>;
+			xlnx,dma2-rxchannelctrl = <0x1010000>;
+			xlnx,dma2-rxirqtimer = <0x3ff>;
+			xlnx,dma2-txchannelctrl = <0x1010000>;
+			xlnx,dma2-txirqtimer = <0x3ff>;
+			xlnx,dma3-control = <0x0>;
+			xlnx,dma3-plb-prio = <0x0>;
+			xlnx,dma3-rxchannelctrl = <0x1010000>;
+			xlnx,dma3-rxirqtimer = <0x3ff>;
+			xlnx,dma3-txchannelctrl = <0x1010000>;
+			xlnx,dma3-txirqtimer = <0x3ff>;
+			xlnx,endian-reset = <0x0>;
+			xlnx,generate-plb-timespecs = <0x1>;
+			xlnx,icu-rd-fetch-plb-prio = <0x0>;
+			xlnx,icu-rd-spec-plb-prio = <0x0>;
+			xlnx,icu-rd-touch-plb-prio = <0x0>;
+			xlnx,interconnect-imask = <0xffffffff>;
+			xlnx,mplb-allow-lock-xfer = <0x1>;
+			xlnx,mplb-arb-mode = <0x0>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-counter = <0x500>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-max-burst = <0x8>;
+			xlnx,mplb-native-dwidth = <0x80>;
+			xlnx,mplb-p2p = <0x0>;
+			xlnx,mplb-prio-dcur = <0x2>;
+			xlnx,mplb-prio-dcuw = <0x3>;
+			xlnx,mplb-prio-icu = <0x4>;
+			xlnx,mplb-prio-splb0 = <0x1>;
+			xlnx,mplb-prio-splb1 = <0x0>;
+			xlnx,mplb-read-pipe-enable = <0x1>;
+			xlnx,mplb-sync-tattribute = <0x0>;
+			xlnx,mplb-wdog-enable = <0x1>;
+			xlnx,mplb-write-pipe-enable = <0x1>;
+			xlnx,mplb-write-post-enable = <0x1>;
+			xlnx,num-dma = <0x0>;
+			xlnx,pir = <0xf>;
+			xlnx,ppc440mc-addr-base = <0x0>;
+			xlnx,ppc440mc-addr-high = <0x1fffffff>;
+			xlnx,ppc440mc-arb-mode = <0x0>;
+			xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
+			xlnx,ppc440mc-control = <0xf810008f>;
+			xlnx,ppc440mc-max-burst = <0x8>;
+			xlnx,ppc440mc-prio-dcur = <0x2>;
+			xlnx,ppc440mc-prio-dcuw = <0x3>;
+			xlnx,ppc440mc-prio-icu = <0x4>;
+			xlnx,ppc440mc-prio-splb0 = <0x1>;
+			xlnx,ppc440mc-prio-splb1 = <0x0>;
+			xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
+			xlnx,ppcdm-asyncmode = <0x0>;
+			xlnx,ppcds-asyncmode = <0x0>;
+			xlnx,user-reset = <0x0>;
+		} ;
+	} ;
+	plb_v46_0: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+		ranges ;
+		FLASH: flash@fc000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xfc000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x2710>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x2>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x1adb0>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 8 2 >;
+				llink-connected = <&Hard_Ethernet_MAC_fifo>;
+				local-mac-address = [ 02 00 00 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x3>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x8000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x8000>;
+			} ;
+		} ;
+		Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 {
+			compatible = "xlnx,xps-ll-fifo-1.01.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81a00000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 9 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x5f5e100>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x5>;
+			xlnx,sda-inertial-delay = <0x5>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LCD_OPTIONAL: gpio@81420000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81420000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0xb>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		LEDs_4Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x4>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		RS232_Uart_1: serial@83e00000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
+			current-speed = <9600>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 11 2 >;
+			reg = < 0x83e00000 0x10000 >;
+			reg-offset = <0x1003>;
+			reg-shift = <2>;
+			xlnx,family = "virtex5";
+			xlnx,has-external-rclk = <0x0>;
+			xlnx,has-external-xin = <0x0>;
+			xlnx,is-a-16550 = <0x1>;
+		} ;
+		SPI_EEPROM: xps-spi@feff8000 {
+			compatible = "xlnx,xps-spi-2.00.b";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 10 2 >;
+			reg = < 0xfeff8000 0x80 >;
+			xlnx,family = "virtex5";
+			xlnx,fifo-exist = <0x1>;
+			xlnx,num-ss-bits = <0x1>;
+			xlnx,num-transfer-bits = <0x8>;
+			xlnx,sck-ratio = <0x80>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		plbv46_pci_0: plbv46-pci@85e00000 {
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "xlnx,plbv46-pci-1.03.a";
+			device_type = "pci";
+			reg = < 0x85e00000 0x10000 >;
+
+			/*
+			 * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to
+			 * 0 which means that a read/write to the memory mapped
+			 * i/o region (which starts at 0xa0000000) for pci
+			 * bar 0 on the plb side translates to 0.
+			 * It is important to set this value to 0xa0000000, so
+			 * that inbound and outbound pci transactions work
+			 * properly including DMA.
+			 */
+			ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0xf0000000 0 0x00010000>;
+
+			#interrupt-cells = <1>;
+			interrupt-parent = <&xps_intc_0>;
+			interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IRQ mapping for pci slots and ALI M1533
+				 * periperhals. In total there are 5 interrupt
+				 * lines connected to a xps_intc controller.
+				 * Four of them are PCI IRQ A, B, C, D and
+				 * which correspond to respectively xpx_intc
+				 * 5, 4, 3 and 2.  The fifth interrupt line is
+				 * connected to the south bridge and this one
+				 * uses irq 1 and is active high instead of
+				 * active low.
+				 *
+				 * The M1533 contains various peripherals
+				 * including AC97 audio, a modem, USB, IDE and
+				 * some power management stuff. The modem
+				 * isn't connected on the ML510 and the power
+				 * management core also isn't used.
+				 */
+
+				/* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
+				0x3000 0 0 1 &xps_intc_0 3 2
+				0x3000 0 0 2 &xps_intc_0 2 2
+				0x3000 0 0 3 &xps_intc_0 5 2
+				0x3000 0 0 4 &xps_intc_0 4 2
+
+				/* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */
+				/*
+				0x11800 0 0 1 &xps_intc_0 5 0 2
+				0x11800 0 0 2 &xps_intc_0 4 0 2
+				0x11800 0 0 3 &xps_intc_0 3 0 2
+				0x11800 0 0 4 &xps_intc_0 2 0 2
+				*/
+
+				/* According to the datasheet + schematic
+				 * ABCD [FPGA] of slot 5 is mapped to DABC.
+				 * Testing showed that at least A maps to B,
+				 * the mapping of the other pins is a guess
+				 * and for that reason the lines have been
+				 * commented out.
+				 */
+				/* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
+				0x2800 0 0 1 &xps_intc_0 4 2
+				/*
+				0x2800 0 0 2 &xps_intc_0 3 2
+				0x2800 0 0 3 &xps_intc_0 2 2
+				0x2800 0 0 4 &xps_intc_0 5 2
+				*/
+
+				/* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */
+				/*
+				0x11000 0 0 1 &xps_intc_0 4 0 2
+				0x11000 0 0 2 &xps_intc_0 3 0 2
+				0x11000 0 0 3 &xps_intc_0 2 0 2
+				0x11000 0 0 4 &xps_intc_0 5 0 2
+				*/
+
+				/* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
+				0x0800 0 0 1 &i8259 7 2
+
+				/* IDSEL 0x1b / dev=11, bus=0 / IDE */
+				0x5800 0 0 1 &i8259 14 2
+
+				/* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */
+				0x7800 0 0 1 &i8259 7 2
+			>;
+			ali_m1533 {
+				#size-cells = <1>;
+				#address-cells = <2>;
+				i8259: interrupt-controller@20 {
+					reg = <1 0x20 2
+							1 0xa0 2
+							1 0x4d0 2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+
+					/* south bridge irq is active high */
+					interrupts = <1 3>;
+					interrupt-parent = <&xps_intc_0>;
+				};
+			};
+		} ;
+		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+			reg = < 0xffff0000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,num-intr-inputs = <0xc>;
+		} ;
+		xps_tft_0: tft@86e00000 {
+			compatible = "xlnx,xps-tft-1.00.a";
+			reg = < 0x86e00000 0x10000 >;
+			xlnx,dcr-splb-slave-if = <0x1>;
+			xlnx,default-tft-base-addr = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,i2c-slave-addr = <0x76>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-native-dwidth = <0x40>;
+			xlnx,mplb-smallest-slave = <0x20>;
+			xlnx,tft-interface = <0x1>;
+		} ;
+	} ;
+}  ;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 7e183ff9a31..01bfb56bbe8 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for PIKA Warp
  *
- * Copyright (c) 2008 PIKA Technologies
+ * Copyright (c) 2008-2009 PIKA Technologies
  *   Sean MacLennan <smaclennan@pikatech.com>
  *
  * This file is licensed under the terms of the GNU General Public
@@ -158,7 +158,7 @@
 
 					partition@0 {
 						label = "splash";
-						reg = <0x00000000 0x00020000>;
+						reg = <0x00000000 0x00010000>;
 					};
 					partition@300000 {
 						label = "fpga";
@@ -244,28 +244,27 @@
 			};
 
 			GPIO0: gpio@ef600b00 {
-				compatible = "ibm,gpio-440ep";
+				compatible = "ibm,ppc4xx-gpio";
 				reg = <0xef600b00 0x00000048>;
 				#gpio-cells = <2>;
 				gpio-controller;
 			};
 
 			GPIO1: gpio@ef600c00 {
-				compatible = "ibm,gpio-440ep";
+				compatible = "ibm,ppc4xx-gpio";
 				reg = <0xef600c00 0x00000048>;
 				#gpio-cells = <2>;
 				gpio-controller;
+			};
 
-				led@31 {
-					compatible = "linux,gpio-led";
-					linux,name = ":green:";
-					gpios = <&GPIO1 31 0>;
-				};		
-	
-				led@30 {	
-					compatible = "linux,gpio-led";
-					linux,name = ":red:";
-					gpios = <&GPIO1 30 0>;
+			power-leds {
+				compatible = "gpio-leds";
+				green {
+					gpios = <&GPIO1 0 0>;
+					default-state = "on";
+				};
+				red {
+					gpios = <&GPIO1 1 0>;
 				};
 			};
 
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index 51b2387bdba..98312d169c8 100644
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -18,6 +18,9 @@
 #   $5 and more - kernel boot files; zImage*, uImage, cuImage.*, etc.
 #
 
+# Bail with error code if anything goes wrong
+set -e
+
 # User may have a custom install script
 
 if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index a32ec8d323a..173a5bb77ca 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -252,7 +252,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index 4e9d85f39da..e9b8495cde0 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -254,7 +254,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 9917a09bad3..865725effe9 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:52 2009
+# Linux kernel version: 2.6.30-rc7
+# Wed Jun  3 10:18:16 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -49,10 +50,12 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -67,9 +70,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,22 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +124,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,11 +165,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -170,7 +182,7 @@ CONFIG_KILAUEA=y
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
 # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_PPC40x_SIMPLE=y
 CONFIG_405EX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -228,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -252,9 +267,10 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +288,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -341,7 +356,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -445,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,6 +511,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -512,6 +526,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +556,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -678,6 +693,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -706,6 +722,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -749,6 +770,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -760,7 +782,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +797,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -790,11 +812,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -812,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -841,9 +867,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -851,17 +880,21 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -892,10 +925,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -964,6 +999,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -972,5 +1008,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 58bf2ac2e0d..14674754787 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Wed Jun  3 09:11:02 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -49,10 +50,12 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -67,9 +70,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,22 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +124,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,11 +165,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -170,7 +182,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 CONFIG_MAKALU=y
 # CONFIG_WALNUT is not set
 # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_PPC40x_SIMPLE=y
 CONFIG_405EX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -228,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -252,9 +267,10 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +288,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -341,7 +356,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -445,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,6 +511,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -512,6 +526,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +556,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -678,6 +693,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -706,6 +722,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -749,6 +770,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -760,7 +782,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +797,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -790,11 +812,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -812,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -841,9 +867,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -851,17 +880,21 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -892,10 +925,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -964,6 +999,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -972,5 +1008,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index f5698f962e5..416e79ac071 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -258,7 +258,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 1d72b0ac3f2..f7fd32c0942 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -258,7 +258,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index 959bdc43a49..e57f1e4c179 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index f9a08ee49b9..5e85412eb9f 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
@@ -716,7 +716,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia drivers
 #
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 # CONFIG_USB_DABUSB is not set
 
 #
@@ -725,7 +725,7 @@ CONFIG_DAB=y
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index be64aa644d1..b652f7dcab5 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -261,7 +261,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index f67250b24ec..c23a4ef13e4 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -256,7 +256,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 9348c12bd7a..b25fad1343d 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -260,7 +260,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index e665433762b..ed31d4f17b5 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -265,7 +265,7 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 70d5c3fa328..e14e89a5e06 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index a921fe3c371..6400aae04dd 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:45 2009
+# Linux kernel version: 2.6.29
+# Tue Apr  7 17:04:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -57,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,6 +75,15 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -99,10 +113,8 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +124,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -123,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -135,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,11 +165,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -176,6 +185,7 @@ CONFIG_SEQUOIA=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -238,9 +248,13 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -262,9 +276,10 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -278,18 +293,16 @@ CONFIG_PCI_LEGACY=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -448,14 +461,23 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -483,12 +505,16 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -515,6 +541,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -529,6 +556,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -568,6 +597,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -577,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -586,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -593,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -734,7 +765,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -750,6 +781,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -778,6 +810,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -842,7 +879,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -858,6 +894,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -873,11 +910,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -924,9 +962,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -934,17 +975,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -952,20 +996,7 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-CONFIG_PPC_EARLY_DEBUG_44x=y
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
@@ -988,10 +1019,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1060,6 +1093,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1068,5 +1102,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 826700872d2..ef32cc4f82e 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -260,7 +260,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 1bf0a63614b..2518b8568c7 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -263,7 +263,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 7d044dfd923..12dc7c40961 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1808,7 +1808,7 @@ CONFIG_PCF8575=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_TPS65010 is not set
-CONFIG_SENSORS_MAX6875=m
+CONFIG_EEPROM_MAX6875=m
 CONFIG_SENSORS_TSL2550=m
 CONFIG_MCU_MPC8349EMITX=m
 # CONFIG_I2C_DEBUG_CORE is not set
diff --git a/arch/powerpc/include/asm/8253pit.h b/arch/powerpc/include/asm/8253pit.h
index b70d6e53b30..a71c9c1455a 100644
--- a/arch/powerpc/include/asm/8253pit.h
+++ b/arch/powerpc/include/asm/8253pit.h
@@ -1,10 +1,3 @@
-#ifndef _ASM_POWERPC_8253PIT_H
-#define _ASM_POWERPC_8253PIT_H
-
 /*
  * 8253/8254 Programmable Interval Timer
  */
-
-#define PIT_TICK_RATE	1193182UL
-
-#endif	/* _ASM_POWERPC_8253PIT_H */
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index b7d2d07b6f9..4012483b189 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -470,6 +470,9 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
+#else  /* __powerpc64__ */
+#include <asm-generic/atomic64.h>
+
 #endif /* __powerpc64__ */
 
 #include <asm-generic/atomic-long.h>
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
index 0f5e8ff59a8..990ff191da8 100644
--- a/arch/powerpc/include/asm/cpm2.h
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -14,10 +14,6 @@
 #include <asm/cpm.h>
 #include <sysdev/fsl_soc.h>
 
-#ifdef CONFIG_PPC_85xx
-#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
-#endif
-
 /* CPM Command register.
 */
 #define CPM_CR_RST	((uint)0x80000000)
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index cb448d68452..3d9e887c3c0 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -15,9 +15,18 @@
 #include <linux/scatterlist.h>
 #include <linux/dma-attrs.h>
 #include <asm/io.h>
+#include <asm/swiotlb.h>
 
 #define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
 
+/* Some dma direct funcs must be visible for use in other dma_ops */
+extern void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag);
+extern void dma_direct_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t dma_handle);
+
+extern unsigned long get_dma_direct_offset(struct device *dev);
+
 #ifdef CONFIG_NOT_COHERENT_CACHE
 /*
  * DMA-consistent mapping functions for PowerPCs that don't support
@@ -78,6 +87,8 @@ struct dma_mapping_ops {
 				dma_addr_t dma_address, size_t size,
 				enum dma_data_direction direction,
 				struct dma_attrs *attrs);
+	int		(*addr_needs_map)(struct device *dev, dma_addr_t addr,
+				size_t size);
 #ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
 	void            (*sync_single_range_for_cpu)(struct device *hwdev,
 				dma_addr_t dma_handle, unsigned long offset,
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index d6b4a12cdef..014a624f4c8 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -256,11 +256,11 @@ do {								\
  * even if we have an executable stack.
  */
 # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
-		(exec_stk != EXSTACK_DISABLE_X) : 0)
+		(exec_stk == EXSTACK_DEFAULT) : 0)
 #else 
 # define SET_PERSONALITY(ex) \
   set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X)
+# define elf_read_implies_exec(ex, exec_stk) (exec_stk == EXSTACK_DEFAULT)
 #endif /* __powerpc64__ */
 
 extern int dcache_bsize;
diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
new file mode 100644
index 00000000000..9154e852673
--- /dev/null
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -0,0 +1,73 @@
+/*
+ *  Copyright 2007 Sony Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.
+ *  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASM_POWERPC_EMULATED_OPS_H
+#define _ASM_POWERPC_EMULATED_OPS_H
+
+#include <asm/atomic.h>
+
+
+#ifdef CONFIG_PPC_EMULATED_STATS
+
+struct ppc_emulated_entry {
+	const char *name;
+	atomic_t val;
+};
+
+extern struct ppc_emulated {
+#ifdef CONFIG_ALTIVEC
+	struct ppc_emulated_entry altivec;
+#endif
+	struct ppc_emulated_entry dcba;
+	struct ppc_emulated_entry dcbz;
+	struct ppc_emulated_entry fp_pair;
+	struct ppc_emulated_entry isel;
+	struct ppc_emulated_entry mcrxr;
+	struct ppc_emulated_entry mfpvr;
+	struct ppc_emulated_entry multiple;
+	struct ppc_emulated_entry popcntb;
+	struct ppc_emulated_entry spe;
+	struct ppc_emulated_entry string;
+	struct ppc_emulated_entry unaligned;
+#ifdef CONFIG_MATH_EMULATION
+	struct ppc_emulated_entry math;
+#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
+	struct ppc_emulated_entry 8xx;
+#endif
+#ifdef CONFIG_VSX
+	struct ppc_emulated_entry vsx;
+#endif
+} ppc_emulated;
+
+extern u32 ppc_warn_emulated;
+
+extern void ppc_warn_emulated_print(const char *type);
+
+#define PPC_WARN_EMULATED(type)						 \
+	do {								 \
+		atomic_inc(&ppc_emulated.type.val);			 \
+		if (ppc_warn_emulated)					 \
+			ppc_warn_emulated_print(ppc_emulated.type.name); \
+	} while (0)
+
+#else /* !CONFIG_PPC_EMULATED_STATS */
+
+#define PPC_WARN_EMULATED(type)	do { } while (0)
+
+#endif /* !CONFIG_PPC_EMULATED_STATS */
+
+#endif /* _ASM_POWERPC_EMULATED_OPS_H */
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index e4094a5cb05..cbd4dfa4bce 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -8,8 +8,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifdef __ASSEMBLY__
-
 /*
  * Feature section common macros
  *
@@ -23,10 +21,12 @@
 /* 64 bits kernel, 32 bits code (ie. vdso32) */
 #define FTR_ENTRY_LONG		.llong
 #define FTR_ENTRY_OFFSET	.long 0xffffffff; .long
+#elif defined(CONFIG_PPC64)
+#define FTR_ENTRY_LONG		.llong
+#define FTR_ENTRY_OFFSET	.llong
 #else
-/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
-#define FTR_ENTRY_LONG		PPC_LONG
-#define FTR_ENTRY_OFFSET	PPC_LONG
+#define FTR_ENTRY_LONG		.long
+#define FTR_ENTRY_OFFSET	.long
 #endif
 
 #define START_FTR_SECTION(label)	label##1:
@@ -141,6 +141,21 @@ label##5:					       	\
 #define ALT_FW_FTR_SECTION_END_IFCLR(msk)	\
 	ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
 
+#ifndef __ASSEMBLY__
+
+#define ASM_MMU_FTR_IF(section_if, section_else, msk, val)	\
+	stringify_in_c(BEGIN_MMU_FTR_SECTION)			\
+	section_if "; "						\
+	stringify_in_c(MMU_FTR_SECTION_ELSE)			\
+	section_else "; "					\
+	stringify_in_c(ALT_MMU_FTR_SECTION_END((msk), (val)))
+
+#define ASM_MMU_FTR_IFSET(section_if, section_else, msk)	\
+	ASM_MMU_FTR_IF(section_if, section_else, (msk), (msk))
+
+#define ASM_MMU_FTR_IFCLR(section_if, section_else, msk)	\
+	ASM_MMU_FTR_IF(section_if, section_else, (msk), 0)
+
 #endif /* __ASSEMBLY__ */
 
 /* LWSYNC feature sections */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 53512374e1c..b7f8f4a87cc 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -80,7 +80,7 @@ static inline void local_irq_disable(void)
 	__asm__ __volatile__("wrteei 0": : :"memory");
 #else
 	unsigned long msr;
-	__asm__ __volatile__("": : :"memory");
+
 	msr = mfmsr();
 	SET_MSR_EE(msr & ~MSR_EE);
 #endif
@@ -92,7 +92,7 @@ static inline void local_irq_enable(void)
 	__asm__ __volatile__("wrteei 1": : :"memory");
 #else
 	unsigned long msr;
-	__asm__ __volatile__("": : :"memory");
+
 	msr = mfmsr();
 	SET_MSR_EE(msr | MSR_EE);
 #endif
@@ -108,7 +108,6 @@ static inline void local_irq_save_ptr(unsigned long *flags)
 #else
 	SET_MSR_EE(msr & ~MSR_EE);
 #endif
-	__asm__ __volatile__("": : :"memory");
 }
 
 #define local_save_flags(flags)	((flags) = mfmsr())
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 7464c0daddd..7ead7c16fb7 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -35,6 +35,16 @@
 #define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
 #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
 
+/* Cell page table entries */
+#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
+#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
+#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
+#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
+#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
+#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
+#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
+#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
+
 /* Boot time flags */
 extern int iommu_is_off;
 extern int iommu_force_on;
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index d2a65e8ca6a..f78f65c38f0 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -20,6 +20,11 @@
 #define _ASM_POWERPC_LPPACA_H
 #ifdef __KERNEL__
 
+/* These definitions relate to hypervisors that only exist when using
+ * a server type processor
+ */
+#ifdef CONFIG_PPC_BOOK3S
+
 //=============================================================================
 //
 //	This control block contains the data that is shared between the
@@ -158,5 +163,6 @@ struct slb_shadow {
 
 extern struct slb_shadow slb_shadow[];
 
+#endif /* CONFIG_PPC_BOOK3S */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 0efdb1dfdc5..11d1fc3a896 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -110,6 +110,10 @@ struct machdep_calls {
 	void		(*show_percpuinfo)(struct seq_file *m, int i);
 
 	void		(*init_IRQ)(void);
+
+	/* Return an irq, or NO_IRQ to indicate there are none pending.
+	 * If for some reason there is no irq, but the interrupt
+	 * shouldn't be counted as spurious, return NO_IRQ_IGNORE. */
 	unsigned int	(*get_irq)(void);
 #ifdef CONFIG_KEXEC
 	void		(*kexec_cpu_down)(int crash_shutdown, int secondary);
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index cbf15438709..fb57ded592f 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -52,6 +52,11 @@
  */
 #define MMU_FTR_NEED_DTLB_SW_LRU	ASM_CONST(0x00200000)
 
+/* This indicates that the processor uses the ISA 2.06 server tlbie
+ * mnemonics
+ */
+#define MMU_FTR_TLBIE_206		ASM_CONST(0x00400000)
+
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 
@@ -69,10 +74,10 @@ extern void early_init_mmu_secondary(void);
 #endif /* !__ASSEMBLY__ */
 
 
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC_STD_MMU_64)
 /* 64-bit classic hash table MMU */
 #  include <asm/mmu-hash64.h>
-#elif defined(CONFIG_PPC_STD_MMU)
+#elif defined(CONFIG_PPC_STD_MMU_32)
 /* 32-bit classic hash table MMU */
 #  include <asm/mmu-hash32.h>
 #elif defined(CONFIG_40x)
diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h
deleted file mode 100644
index 15f650f987e..00000000000
--- a/arch/powerpc/include/asm/mpc86xx.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * MPC86xx definitions
- *
- * Author: Jeff Brown
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_MPC86xx_H__
-#define __ASM_POWERPC_MPC86xx_H__
-
-#include <asm/mmu.h>
-
-#ifdef CONFIG_PPC_86xx
-
-#define CPU0_BOOT_RELEASE 0x01000000
-#define CPU1_BOOT_RELEASE 0x02000000
-#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
-#define MCM_PORT_CONFIG_OFFSET 0x1010
-
-/* Offset from CCSRBAR */
-#define MPC86xx_MCM_OFFSET      (0x00000)
-#define MPC86xx_MCM_SIZE        (0x02000)
-
-#endif /* CONFIG_PPC_86xx */
-#endif /* __ASM_POWERPC_MPC86xx_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 6ef05572301..c8a3cbfe02f 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -43,6 +43,7 @@ struct task_struct;
  * processor.
  */
 struct paca_struct {
+#ifdef CONFIG_PPC_BOOK3S
 	/*
 	 * Because hw_cpu_id, unlike other paca fields, is accessed
 	 * routinely from other CPUs (from the IRQ code), we stick to
@@ -51,7 +52,7 @@ struct paca_struct {
 	 */
 
 	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
-
+#endif /* CONFIG_PPC_BOOK3S */
 	/*
 	 * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c 
 	 * load lock_token and paca_index with a single lwz
@@ -64,13 +65,16 @@ struct paca_struct {
 	u64 kernel_toc;			/* Kernel TOC address */
 	u64 kernelbase;			/* Base address of kernel */
 	u64 kernel_msr;			/* MSR while running in kernel */
+#ifdef CONFIG_PPC_STD_MMU_64
 	u64 stab_real;			/* Absolute address of segment table */
 	u64 stab_addr;			/* Virtual address of segment table */
+#endif /* CONFIG_PPC_STD_MMU_64 */
 	void *emergency_sp;		/* pointer to emergency stack */
 	u64 data_offset;		/* per cpu data offset */
 	s16 hw_cpu_id;			/* Physical processor number */
 	u8 cpu_start;			/* At startup, processor spins until */
 					/* this becomes non-zero. */
+#ifdef CONFIG_PPC_STD_MMU_64
 	struct slb_shadow *slb_shadow_ptr;
 
 	/*
@@ -81,11 +85,13 @@ struct paca_struct {
 	u64 exmc[10];		/* used for machine checks */
 	u64 exslb[10];		/* used for SLB/segment table misses
  				 * on the linear mapping */
-
-	mm_context_t context;
+	/* SLB related definitions */
 	u16 vmalloc_sllp;
 	u16 slb_cache_ptr;
 	u16 slb_cache[SLB_CACHE_ENTRIES];
+#endif /* CONFIG_PPC_STD_MMU_64 */
+
+	mm_context_t context;
 
 	/*
 	 * then miscellaneous read-write fields
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 32cbf16f10e..4940662ee87 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -231,6 +231,11 @@ extern void copy_user_page(void *to, void *from, unsigned long vaddr,
 		struct page *p);
 extern int page_is_ram(unsigned long pfn);
 
+#ifdef CONFIG_PPC_SMLPAR
+void arch_free_page(struct page *page, int order);
+#define HAVE_ARCH_FREE_PAGE
+#endif
+
 struct vm_area_struct;
 
 typedef struct page *pgtable_t;
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 84007afabdb..4c61fa0b8d7 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -86,17 +86,12 @@ struct pci_controller {
 	void *io_base_alloc;
 #endif
 	resource_size_t io_base_phys;
-#ifndef CONFIG_PPC64
 	resource_size_t pci_io_size;
-#endif
 
 	/* Some machines (PReP) have a non 1:1 mapping of
 	 * the PCI memory space in the CPU bus space
 	 */
 	resource_size_t pci_mem_offset;
-#ifdef CONFIG_PPC64
-	unsigned long pci_io_size;
-#endif
 
 	/* Some machines have a special region to forward the ISA
 	 * "memory" cycles such as VGA memory regions. Left to 0
@@ -140,10 +135,12 @@ struct pci_controller {
 	struct resource	io_resource;
 	struct resource mem_resources[3];
 	int global_number;		/* PCI domain number */
+
+	resource_size_t dma_window_base_cur;
+	resource_size_t dma_window_size;
+
 #ifdef CONFIG_PPC64
 	unsigned long buid;
-	unsigned long dma_window_base_cur;
-	unsigned long dma_window_size;
 
 	void *private_data;
 #endif	/* CONFIG_PPC64 */
@@ -185,7 +182,6 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
 extern void setup_indirect_pci(struct pci_controller* hose,
 			       resource_size_t cfg_addr,
 			       resource_size_t cfg_data, u32 flags);
-extern void setup_grackle(struct pci_controller *hose);
 #else	/* CONFIG_PPC64 */
 
 /*
@@ -221,6 +217,7 @@ struct pci_dn {
 #define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
 
 extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
+extern void * update_dn_pci_info(struct device_node *dn, void *data);
 
 /* Get a device_node from a pci_dev.  This code must be fast except
  * in the case where the sysdata is incorrect and needs to be fixed
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index c40db05f21e..8cd083c6150 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -31,9 +31,11 @@
 #error TASK_SIZE_USER64 exceeds pagetable range
 #endif
 
+#ifdef CONFIG_PPC_STD_MMU_64
 #if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
 #error TASK_SIZE_USER64 exceeds user VSID range
 #endif
+#endif
 
 /*
  * Define the address range of the vmalloc VM area.
@@ -199,8 +201,11 @@ static inline unsigned long pte_update(struct mm_struct *mm,
 	if (!huge)
 		assert_pte_locked(mm, addr);
 
+#ifdef CONFIG_PPC_STD_MMU_64
 	if (old & _PAGE_HASHPTE)
 		hpte_need_flush(mm, addr, ptep, old, huge);
+#endif
+
 	return old;
 }
 
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 640ccbbc097..b74f16d45cb 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -25,6 +25,7 @@
 #define PPC_INST_LSWI			0x7c0004aa
 #define PPC_INST_LSWX			0x7c00042a
 #define PPC_INST_LWSYNC			0x7c2004ac
+#define PPC_INST_LXVD2X			0x7c000698
 #define PPC_INST_MCRXR			0x7c000400
 #define PPC_INST_MCRXR_MASK		0xfc0007fe
 #define PPC_INST_MFSPR_PVR		0x7c1f42a6
@@ -43,14 +44,18 @@
 
 #define PPC_INST_STSWI			0x7c0005aa
 #define PPC_INST_STSWX			0x7c00052a
+#define PPC_INST_STXVD2X		0x7c000798
+#define PPC_INST_TLBIE			0x7c000264
 #define PPC_INST_TLBILX			0x7c000024
 #define PPC_INST_WAIT			0x7c00007c
 
 /* macros to insert fields into opcodes */
-#define __PPC_RA(a)	((a & 0x1f) << 16)
-#define __PPC_RB(b)	((b & 0x1f) << 11)
-#define __PPC_T_TLB(t)	((t & 0x3) << 21)
-#define __PPC_WC(w)	((w & 0x3) << 21)
+#define __PPC_RA(a)	(((a) & 0x1f) << 16)
+#define __PPC_RB(b)	(((b) & 0x1f) << 11)
+#define __PPC_RS(s)	(((s) & 0x1f) << 21)
+#define __PPC_XS(s)	((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
+#define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
+#define __PPC_WC(w)	(((w) & 0x3) << 21)
 
 /* Deal with instructions that older assemblers aren't aware of */
 #define	PPC_DCBAL(a, b)		stringify_in_c(.long PPC_INST_DCBAL | \
@@ -69,5 +74,17 @@
 #define PPC_TLBILX_VA(a, b)	PPC_TLBILX(3, a, b)
 #define PPC_WAIT(w)		stringify_in_c(.long PPC_INST_WAIT | \
 					__PPC_WC(w))
+#define PPC_TLBIE(lp,a) 	stringify_in_c(.long PPC_INST_TLBIE | \
+					       __PPC_RB(a) | __PPC_RS(lp))
+
+/*
+ * Define what the VSX XX1 form instructions will look like, then add
+ * the 128 bit load store instructions based on that.
+ */
+#define VSX_XX1(s, a, b)	(__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b))
+#define STXVD2X(s, a, b)	stringify_in_c(.long PPC_INST_STXVD2X | \
+					       VSX_XX1((s), (a), (b)))
+#define LXVD2X(s, a, b)		stringify_in_c(.long PPC_INST_LXVD2X | \
+					       VSX_XX1((s), (a), (b)))
 
 #endif /* _ASM_POWERPC_PPC_OPCODE_H */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 384d90c9c27..f9729529c20 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -76,16 +76,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
 				REST_10GPRS(22, base)
 #endif
 
-/*
- * Define what the VSX XX1 form instructions will look like, then add
- * the 128 bit load store instructions based on that.
- */
-#define VSX_XX1(xs, ra, rb)	(((xs) & 0x1f) << 21 | ((ra) << 16) |  \
-				 ((rb) << 11) | (((xs) >> 5)))
-
-#define STXVD2X(xs, ra, rb)	.long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
-#define LXVD2X(xs, ra, rb)	.long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
-
 #define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
 #define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
 #define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index cdb6fd814de..7f065e178ec 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -53,6 +53,13 @@ enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void);
 extern u64 ps3_os_area_get_rtc_diff(void);
 extern void ps3_os_area_set_rtc_diff(u64 rtc_diff);
 
+struct ps3_os_area_flash_ops {
+	ssize_t (*read)(void *buf, size_t count, loff_t pos);
+	ssize_t (*write)(const void *buf, size_t count, loff_t pos);
+};
+
+extern void ps3_os_area_flash_register(const struct ps3_os_area_flash_ops *ops);
+
 /* dma routines */
 
 enum ps3_dma_page_size {
@@ -418,15 +425,15 @@ static inline struct ps3_system_bus_driver *
  * @data: Data to set
  */
 
-static inline void ps3_system_bus_set_driver_data(
+static inline void ps3_system_bus_set_drvdata(
 	struct ps3_system_bus_device *dev, void *data)
 {
-	dev->core.driver_data = data;
+	dev_set_drvdata(&dev->core, data);
 }
-static inline void *ps3_system_bus_get_driver_data(
+static inline void *ps3_system_bus_get_drvdata(
 	struct ps3_system_bus_device *dev)
 {
-	return dev->core.driver_data;
+	return dev_get_drvdata(&dev->core);
 }
 
 /* These two need global scope for get_dma_ops(). */
@@ -520,7 +527,4 @@ void ps3_sync_irq(int node);
 u32 ps3_get_hw_thread_id(int cpu);
 u64 ps3_get_spe_id(void *arg);
 
-/* mutex synchronizing GPU accesses and video mode changes */
-extern struct mutex ps3_gpu_mutex;
-
 #endif
diff --git a/arch/powerpc/include/asm/ps3gpu.h b/arch/powerpc/include/asm/ps3gpu.h
new file mode 100644
index 00000000000..b2b89591907
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3gpu.h
@@ -0,0 +1,86 @@
+/*
+ *  PS3 GPU declarations.
+ *
+ *  Copyright 2009 Sony Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.
+ *  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASM_POWERPC_PS3GPU_H
+#define _ASM_POWERPC_PS3GPU_H
+
+#include <linux/mutex.h>
+
+#include <asm/lv1call.h>
+
+
+#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC	0x101
+#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP	0x102
+
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP	0x600
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT		0x601
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT_SYNC	0x602
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE	0x603
+
+#define L1GPU_FB_BLIT_WAIT_FOR_COMPLETION	(1ULL << 32)
+
+#define L1GPU_DISPLAY_SYNC_HSYNC		1
+#define L1GPU_DISPLAY_SYNC_VSYNC		2
+
+
+/* mutex synchronizing GPU accesses and video mode changes */
+extern struct mutex ps3_gpu_mutex;
+
+
+static inline int lv1_gpu_display_sync(u64 context_handle, u64 head,
+				       u64 ddr_offset)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC,
+					 head, ddr_offset, 0, 0);
+}
+
+static inline int lv1_gpu_display_flip(u64 context_handle, u64 head,
+				       u64 ddr_offset)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP,
+					 head, ddr_offset, 0, 0);
+}
+
+static inline int lv1_gpu_fb_setup(u64 context_handle, u64 xdr_lpar,
+				   u64 xdr_size, u64 ioif_offset)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP,
+					 xdr_lpar, xdr_size, ioif_offset, 0);
+}
+
+static inline int lv1_gpu_fb_blit(u64 context_handle, u64 ddr_offset,
+				  u64 ioif_offset, u64 sync_width, u64 pitch)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
+					 ddr_offset, ioif_offset, sync_width,
+					 pitch);
+}
+
+static inline int lv1_gpu_fb_close(u64 context_handle)
+{
+	return lv1_gpu_context_attribute(context_handle,
+					 L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE, 0,
+					 0, 0, 0);
+}
+
+#endif /* _ASM_POWERPC_PS3GPU_H */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index c9c678fb253..8c341490cfc 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -135,7 +135,9 @@ do {									      \
  * These are defined as per linux/ptrace.h, which see.
  */
 #define arch_has_single_step()	(1)
+#define arch_has_block_step()	(!cpu_has_feature(CPU_FTR_601))
 extern void user_enable_single_step(struct task_struct *);
+extern void user_enable_block_step(struct task_struct *);
 extern void user_disable_single_step(struct task_struct *);
 
 #endif /* __ASSEMBLY__ */
@@ -288,4 +290,6 @@ extern void user_disable_single_step(struct task_struct *);
 #define PPC_PTRACE_PEEKUSR_3264  0x91
 #define PPC_PTRACE_POKEUSR_3264  0x90
 
+#define PTRACE_SINGLEBLOCK	0x100	/* resume execution until next branch */
+
 #endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 2701753d993..157c5ca581c 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -22,7 +22,7 @@
 #include <asm/cpm.h>
 #include <asm/immap_qe.h>
 
-#define QE_NUM_OF_SNUM	28
+#define QE_NUM_OF_SNUM	256	/* There are 256 serial number in QE */
 #define QE_NUM_OF_BRGS	16
 #define QE_NUM_OF_PORTS	1024
 
@@ -152,6 +152,9 @@ unsigned int qe_get_brg_clk(void);
 int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
+unsigned int qe_get_num_of_risc(void);
+unsigned int qe_get_num_of_snums(void);
+
 /* we actually use cpm_muram implementation, define this for convenience */
 #define qe_muram_init cpm_muram_init
 #define qe_muram_alloc cpm_muram_alloc
@@ -231,12 +234,16 @@ struct qe_bd {
 #define QE_ALIGNMENT_OF_PRAM	64
 
 /* RISC allocation */
-enum qe_risc_allocation {
-	QE_RISC_ALLOCATION_RISC1 = 1,	/* RISC 1 */
-	QE_RISC_ALLOCATION_RISC2 = 2,	/* RISC 2 */
-	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3	/* Dynamically choose
-						   RISC 1 or RISC 2 */
-};
+#define QE_RISC_ALLOCATION_RISC1	0x1  /* RISC 1 */
+#define QE_RISC_ALLOCATION_RISC2	0x2  /* RISC 2 */
+#define QE_RISC_ALLOCATION_RISC3	0x4  /* RISC 3 */
+#define QE_RISC_ALLOCATION_RISC4	0x8  /* RISC 4 */
+#define QE_RISC_ALLOCATION_RISC1_AND_RISC2	(QE_RISC_ALLOCATION_RISC1 | \
+						 QE_RISC_ALLOCATION_RISC2)
+#define QE_RISC_ALLOCATION_FOUR_RISCS	(QE_RISC_ALLOCATION_RISC1 | \
+					 QE_RISC_ALLOCATION_RISC2 | \
+					 QE_RISC_ALLOCATION_RISC3 | \
+					 QE_RISC_ALLOCATION_RISC4)
 
 /* QE extended filtering Table Lookup Key Size */
 enum qe_fltr_tbl_lookup_key_size {
@@ -668,6 +675,8 @@ struct ucc_slow_pram {
 #define UCC_GETH_UPSMR_RMM      0x00001000
 #define UCC_GETH_UPSMR_CAM      0x00000400
 #define UCC_GETH_UPSMR_BRO      0x00000200
+#define UCC_GETH_UPSMR_SMM	0x00000080
+#define UCC_GETH_UPSMR_SGMM	0x00000020
 
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD	0x8000
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index fb359b0a693..a3c28e46947 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -745,11 +745,11 @@
 			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
 #ifdef CONFIG_PPC64
 #define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
-				     : : "r" (v))
+				     : : "r" (v) : "memory")
 #define mtmsrd(v)	__mtmsrd((v), 0)
 #define mtmsr(v)	mtmsrd(v)
 #else
-#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v))
+#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v) : "memory")
 #endif
 
 #define mfspr(rn)	({unsigned long rval; \
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
index fcf7d55afe4..912bf597870 100644
--- a/arch/powerpc/include/asm/scatterlist.h
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -21,7 +21,7 @@ struct scatterlist {
 	unsigned int offset;
 	unsigned int length;
 
-	/* For TCE support */
+	/* For TCE or SWIOTLB support */
 	dma_addr_t dma_address;
 	u32 dma_length;
 };
@@ -34,11 +34,7 @@ struct scatterlist {
  * is 0.
  */
 #define sg_dma_address(sg)	((sg)->dma_address)
-#ifdef __powerpc64__
 #define sg_dma_len(sg)		((sg)->dma_length)
-#else
-#define sg_dma_len(sg)		((sg)->length)
-#endif
 
 #ifdef __powerpc64__
 #define ISA_DMA_THRESHOLD	(~0UL)
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
new file mode 100644
index 00000000000..30891d6e2bc
--- /dev/null
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_SWIOTLB_H
+#define __ASM_SWIOTLB_H
+
+#include <linux/swiotlb.h>
+
+extern struct dma_mapping_ops swiotlb_dma_ops;
+extern struct dma_mapping_ops swiotlb_pci_dma_ops;
+
+int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t,
+				       size_t size);
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+extern unsigned int ppc_swiotlb_enable;
+int __init swiotlb_setup_bus_notifier(void);
+
+#endif /* __ASM_SWIOTLB_H */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index a0b92de51c7..370600ca276 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -325,3 +325,4 @@ SYSCALL(inotify_init1)
 SYSCALL_SPU(perf_counter_open)
 COMPAT_SYS_SPU(preadv)
 COMPAT_SYS_SPU(pwritev)
+COMPAT_SYS(rt_tgsigqueueinfo)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index 2b2420a4988..bb8e006a47c 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -211,7 +211,7 @@ extern struct task_struct *_switch(struct thread_struct *prev,
 
 extern unsigned int rtas_data;
 extern int mem_init_done;	/* set on boot once kmalloc can be called */
-extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
+extern int init_bootmem_done;	/* set once bootmem is available */
 extern phys_addr_t memory_limit;
 extern unsigned long klimit;
 
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 4badac2d11d..cef080bfc60 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -344,10 +344,11 @@
 #define __NR_perf_counter_open	319
 #define __NR_preadv		320
 #define __NR_pwritev		321
+#define __NR_rt_tgsigqueueinfo	322
 
 #ifdef __KERNEL__
 
-#define __NR_syscalls		322
+#define __NR_syscalls		323
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
diff --git a/arch/powerpc/include/asm/xilinx_pci.h b/arch/powerpc/include/asm/xilinx_pci.h
new file mode 100644
index 00000000000..7a8275caf6a
--- /dev/null
+++ b/arch/powerpc/include/asm/xilinx_pci.h
@@ -0,0 +1,21 @@
+/*
+ * Xilinx pci external definitions
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef INCLUDE_XILINX_PCI
+#define INCLUDE_XILINX_PCI
+
+#ifdef CONFIG_XILINX_PCI
+extern void __init xilinx_pci_init(void);
+#else
+static inline void __init xilinx_pci_init(void) { return; }
+#endif
+
+#endif /* INCLUDE_XILINX_PCI */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index a2c683403c2..612b0c4dc26 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -36,7 +36,7 @@ obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   firmware.o nvram_64.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
-obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
+obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
 obj-$(CONFIG_PPC_OF)		+= of_device.o of_platform.o prom_parse.o
 obj-$(CONFIG_PPC_CLOCK)		+= clock.o
@@ -82,6 +82,7 @@ obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 pci64-$(CONFIG_PPC64)		+= pci_dn.o isa-bridge.o
 obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
@@ -111,6 +112,7 @@ obj-y				+= ppc_save_regs.o
 endif
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
+extra-$(CONFIG_ALTIVEC)		+= vector.o
 extra-$(CONFIG_PPC64)		+= entry_64.o
 
 extra-y				+= systbl_chk.i
@@ -123,6 +125,7 @@ PHONY += systbl_chk
 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
 	$(call cmd,systbl_chk)
 
+ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y)
 $(obj)/built-in.o:		prom_init_check
 
 quiet_cmd_prom_init_check = CALL    $<
@@ -131,5 +134,6 @@ quiet_cmd_prom_init_check = CALL    $<
 PHONY += prom_init_check
 prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
 	$(call cmd,prom_init_check)
+endif
 
 clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 5ffcfaa77d6..a5b632e52fa 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -24,6 +24,7 @@
 #include <asm/system.h>
 #include <asm/cache.h>
 #include <asm/cputable.h>
+#include <asm/emulated_ops.h>
 
 struct aligninfo {
 	unsigned char len;
@@ -730,8 +731,10 @@ int fix_alignment(struct pt_regs *regs)
 	areg = dsisr & 0x1f;		/* register to update */
 
 #ifdef CONFIG_SPE
-	if ((instr >> 26) == 0x4)
+	if ((instr >> 26) == 0x4) {
+		PPC_WARN_EMULATED(spe);
 		return emulate_spe(regs, reg, instr);
+	}
 #endif
 
 	instr = (dsisr >> 10) & 0x7f;
@@ -783,23 +786,28 @@ int fix_alignment(struct pt_regs *regs)
 			flags |= SPLT;
 			nb = 8;
 		}
+		PPC_WARN_EMULATED(vsx);
 		return emulate_vsx(addr, reg, areg, regs, flags, nb);
 	}
 #endif
 	/* A size of 0 indicates an instruction we don't support, with
 	 * the exception of DCBZ which is handled as a special case here
 	 */
-	if (instr == DCBZ)
+	if (instr == DCBZ) {
+		PPC_WARN_EMULATED(dcbz);
 		return emulate_dcbz(regs, addr);
+	}
 	if (unlikely(nb == 0))
 		return 0;
 
 	/* Load/Store Multiple instructions are handled in their own
 	 * function
 	 */
-	if (flags & M)
+	if (flags & M) {
+		PPC_WARN_EMULATED(multiple);
 		return emulate_multiple(regs, addr, reg, nb,
 					flags, instr, swiz);
+	}
 
 	/* Verify the address of the operand */
 	if (unlikely(user_mode(regs) &&
@@ -816,8 +824,12 @@ int fix_alignment(struct pt_regs *regs)
 	}
 
 	/* Special case for 16-byte FP loads and stores */
-	if (nb == 16)
+	if (nb == 16) {
+		PPC_WARN_EMULATED(fp_pair);
 		return emulate_fp_pair(addr, reg, flags);
+	}
+
+	PPC_WARN_EMULATED(unaligned);
 
 	/* If we are loading, get the data from user space, else
 	 * get it from register values
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index e981d1ce191..561b6465231 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -122,8 +122,6 @@ int main(void)
 	DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack));
 	DEFINE(PACACURRENT, offsetof(struct paca_struct, __current));
 	DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr));
-	DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
-	DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
 	DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
 	DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
 	DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
@@ -132,35 +130,30 @@ int main(void)
 	DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
 	DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
 	DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending));
-	DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
-	DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
-	DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
 #ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct,
 					    context.low_slices_psize));
 	DEFINE(PACAHIGHSLICEPSIZE, offsetof(struct paca_struct,
 					    context.high_slices_psize));
 	DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
+#endif /* CONFIG_PPC_MM_SLICES */
+#ifdef CONFIG_PPC_STD_MMU_64
+	DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
+	DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
+	DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
+	DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
+	DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
+#ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(MMUPSIZESLLP, offsetof(struct mmu_psize_def, sllp));
 #else
 	DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, context.sllp));
-
 #endif /* CONFIG_PPC_MM_SLICES */
 	DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
 	DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
 	DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
-	DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
 	DEFINE(PACALPPACAPTR, offsetof(struct paca_struct, lppaca_ptr));
-	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
-	DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
-	DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
-	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
-	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
 	DEFINE(PACA_SLBSHADOWPTR, offsetof(struct paca_struct, slb_shadow_ptr));
-	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
-	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
-
 	DEFINE(SLBSHADOW_STACKVSID,
 	       offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid));
 	DEFINE(SLBSHADOW_STACKESID,
@@ -170,6 +163,15 @@ int main(void)
 	DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int));
 	DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int));
 	DEFINE(SLBSHADOW_SAVEAREA, offsetof(struct slb_shadow, save_area));
+#endif /* CONFIG_PPC_STD_MMU_64 */
+	DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
+	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
+	DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
+	DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
+	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
+	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
+	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
+	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
 #endif /* CONFIG_PPC64 */
 
 	/* RTAS */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 3e33fb933d9..4a24a2fc457 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -427,7 +427,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7 (architected)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTR_HPTE_TABLE |
+			MMU_FTR_TLBIE_206,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
@@ -441,7 +442,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_name		= "POWER7 (raw)",
 		.cpu_features		= CPU_FTRS_POWER7,
 		.cpu_user_features	= COMMON_USER_POWER7,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTR_HPTE_TABLE |
+			MMU_FTR_TLBIE_206,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
new file mode 100644
index 00000000000..68ccf11e4f1
--- /dev/null
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -0,0 +1,163 @@
+/*
+ * Contains routines needed to support swiotlb for ppc.
+ *
+ * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/pfn.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+
+#include <asm/machdep.h>
+#include <asm/swiotlb.h>
+#include <asm/dma.h>
+#include <asm/abs_addr.h>
+
+int swiotlb __read_mostly;
+unsigned int ppc_swiotlb_enable;
+
+void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr)
+{
+	unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr));
+	void *pageaddr = page_address(pfn_to_page(pfn));
+
+	if (pageaddr != NULL)
+		return pageaddr + (addr % PAGE_SIZE);
+	return NULL;
+}
+
+dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
+{
+	return paddr + get_dma_direct_offset(hwdev);
+}
+
+phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
+
+{
+	return baddr - get_dma_direct_offset(hwdev);
+}
+
+/*
+ * Determine if an address needs bounce buffering via swiotlb.
+ * Going forward I expect the swiotlb code to generalize on using
+ * a dma_ops->addr_needs_map, and this function will move from here to the
+ * generic swiotlb code.
+ */
+int
+swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr,
+				   size_t size)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->addr_needs_map(hwdev, addr, size);
+}
+
+/*
+ * Determine if an address is reachable by a pci device, or if we must bounce.
+ */
+static int
+swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
+{
+	u64 mask = dma_get_mask(hwdev);
+	dma_addr_t max;
+	struct pci_controller *hose;
+	struct pci_dev *pdev = to_pci_dev(hwdev);
+
+	hose = pci_bus_to_host(pdev->bus);
+	max = hose->dma_window_base_cur + hose->dma_window_size;
+
+	/* check that we're within mapped pci window space */
+	if ((addr + size > max) | (addr < hose->dma_window_base_cur))
+		return 1;
+
+	return !is_buffer_dma_capable(mask, addr, size);
+}
+
+static int
+swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
+{
+	return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
+}
+
+
+/*
+ * At the moment, all platforms that use this code only require
+ * swiotlb to be used if we're operating on HIGHMEM.  Since
+ * we don't ever call anything other than map_sg, unmap_sg,
+ * map_page, and unmap_page on highmem, use normal dma_ops
+ * for everything else.
+ */
+struct dma_mapping_ops swiotlb_dma_ops = {
+	.alloc_coherent = dma_direct_alloc_coherent,
+	.free_coherent = dma_direct_free_coherent,
+	.map_sg = swiotlb_map_sg_attrs,
+	.unmap_sg = swiotlb_unmap_sg_attrs,
+	.dma_supported = swiotlb_dma_supported,
+	.map_page = swiotlb_map_page,
+	.unmap_page = swiotlb_unmap_page,
+	.addr_needs_map = swiotlb_addr_needs_map,
+	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device
+};
+
+struct dma_mapping_ops swiotlb_pci_dma_ops = {
+	.alloc_coherent = dma_direct_alloc_coherent,
+	.free_coherent = dma_direct_free_coherent,
+	.map_sg = swiotlb_map_sg_attrs,
+	.unmap_sg = swiotlb_unmap_sg_attrs,
+	.dma_supported = swiotlb_dma_supported,
+	.map_page = swiotlb_map_page,
+	.unmap_page = swiotlb_unmap_page,
+	.addr_needs_map = swiotlb_pci_addr_needs_map,
+	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device
+};
+
+static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
+				  unsigned long action, void *data)
+{
+	struct device *dev = data;
+
+	/* We are only intereted in device addition */
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return 0;
+
+	/* May need to bounce if the device can't address all of DRAM */
+	if (dma_get_mask(dev) < lmb_end_of_DRAM())
+		set_dma_ops(dev, &swiotlb_dma_ops);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
+	.notifier_call = ppc_swiotlb_bus_notify,
+	.priority = 0,
+};
+
+static struct notifier_block ppc_swiotlb_of_bus_notifier = {
+	.notifier_call = ppc_swiotlb_bus_notify,
+	.priority = 0,
+};
+
+int __init swiotlb_setup_bus_notifier(void)
+{
+	bus_register_notifier(&platform_bus_type,
+			      &ppc_swiotlb_plat_bus_notifier);
+	bus_register_notifier(&of_platform_bus_type,
+			      &ppc_swiotlb_of_bus_notifier);
+
+	return 0;
+}
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 6b02793dc75..20a60d661ba 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -19,7 +19,7 @@
  * default the offset is PCI_DRAM_OFFSET.
  */
 
-static unsigned long get_dma_direct_offset(struct device *dev)
+unsigned long get_dma_direct_offset(struct device *dev)
 {
 	if (dev)
 		return (unsigned long)dev->archdata.dma_data;
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
new file mode 100644
index 00000000000..eb898112e57
--- /dev/null
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -0,0 +1,978 @@
+/*
+ * This file contains the 64-bit "server" PowerPC variant
+ * of the low level exception handling including exception
+ * vectors, exception return, part of the slb and stab
+ * handling and other fixed offset specific things.
+ *
+ * This file is meant to be #included from head_64.S due to
+ * position dependant assembly.
+ *
+ * Most of this originates from head_64.S and thus has the same
+ * copyright history.
+ *
+ */
+
+/*
+ * We layout physical memory as follows:
+ * 0x0000 - 0x00ff : Secondary processor spin code
+ * 0x0100 - 0x2fff : pSeries Interrupt prologs
+ * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
+ * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x7000 - 0x7fff : FWNMI data area
+ * 0x8000 -        : Early init and support code
+ */
+
+
+/*
+ *   SPRG Usage
+ *
+ *   Register	Definition
+ *
+ *   SPRG0	reserved for hypervisor
+ *   SPRG1	temp - used to save gpr
+ *   SPRG2	temp - used to save gpr
+ *   SPRG3	virt addr of paca
+ */
+
+/*
+ * This is the start of the interrupt handlers for pSeries
+ * This code runs with relocation off.
+ * Code from here to __end_interrupts gets copied down to real
+ * address 0x100 when we are running a relocatable kernel.
+ * Therefore any relative branches in this section must only
+ * branch to labels in this section.
+ */
+	. = 0x100
+	.globl __start_interrupts
+__start_interrupts:
+
+	STD_EXCEPTION_PSERIES(0x100, system_reset)
+
+	. = 0x200
+_machine_check_pSeries:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+	. = 0x300
+	.globl data_access_pSeries
+data_access_pSeries:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13
+BEGIN_FTR_SECTION
+	mtspr	SPRN_SPRG2,r12
+	mfspr	r13,SPRN_DAR
+	mfspr	r12,SPRN_DSISR
+	srdi	r13,r13,60
+	rlwimi	r13,r12,16,0x20
+	mfcr	r12
+	cmpwi	r13,0x2c
+	beq	do_stab_bolted_pSeries
+	mtcrf	0x80,r12
+	mfspr	r12,SPRN_SPRG2
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+
+	. = 0x380
+	.globl data_access_slb_pSeries
+data_access_slb_pSeries:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13
+	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_DAR
+	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
+	mfcr	r9
+#ifdef __DISABLED__
+	/* Keep that around for when we re-implement dynamic VSIDs */
+	cmpdi	r3,0
+	bge	slb_miss_user_pseries
+#endif /* __DISABLED__ */
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG1
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	mfspr	r12,SPRN_SRR1		/* and SRR1 */
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	/*
+	 * We can't just use a direct branch to .slb_miss_realmode
+	 * because the distance from here to there depends on where
+	 * the kernel ends up being put.
+	 */
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+
+	STD_EXCEPTION_PSERIES(0x400, instruction_access)
+
+	. = 0x480
+	.globl instruction_access_slb_pSeries
+instruction_access_slb_pSeries:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13
+	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	std	r3,PACA_EXSLB+EX_R3(r13)
+	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
+	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
+	mfcr	r9
+#ifdef __DISABLED__
+	/* Keep that around for when we re-implement dynamic VSIDs */
+	cmpdi	r3,0
+	bge	slb_miss_user_pseries
+#endif /* __DISABLED__ */
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG1
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	mfspr	r12,SPRN_SRR1		/* and SRR1 */
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
+
+	MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
+	STD_EXCEPTION_PSERIES(0x600, alignment)
+	STD_EXCEPTION_PSERIES(0x700, program_check)
+	STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
+	MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
+	STD_EXCEPTION_PSERIES(0xa00, trap_0a)
+	STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+
+	. = 0xc00
+	.globl	system_call_pSeries
+system_call_pSeries:
+	HMT_MEDIUM
+BEGIN_FTR_SECTION
+	cmpdi	r0,0x1ebe
+	beq-	1f
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
+	mr	r9,r13
+	mfspr	r13,SPRN_SPRG3
+	mfspr	r11,SPRN_SRR0
+	ld	r12,PACAKBASE(r13)
+	ld	r10,PACAKMSR(r13)
+	LOAD_HANDLER(r12, system_call_entry)
+	mtspr	SPRN_SRR0,r12
+	mfspr	r12,SPRN_SRR1
+	mtspr	SPRN_SRR1,r10
+	rfid
+	b	.	/* prevent speculative execution */
+
+/* Fast LE/BE switch system call */
+1:	mfspr	r12,SPRN_SRR1
+	xori	r12,r12,MSR_LE
+	mtspr	SPRN_SRR1,r12
+	rfid		/* return to userspace */
+	b	.
+
+	STD_EXCEPTION_PSERIES(0xd00, single_step)
+	STD_EXCEPTION_PSERIES(0xe00, trap_0e)
+
+	/* We need to deal with the Altivec unavailable exception
+	 * here which is at 0xf20, thus in the middle of the
+	 * prolog code of the PerformanceMonitor one. A little
+	 * trickery is thus necessary
+	 */
+	. = 0xf00
+	b	performance_monitor_pSeries
+
+	. = 0xf20
+	b	altivec_unavailable_pSeries
+
+	. = 0xf40
+	b	vsx_unavailable_pSeries
+
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
+	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
+#endif /* CONFIG_CBE_RAS */
+	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+	HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
+
+	. = 0x3000
+
+/*** pSeries interrupt support ***/
+
+	/* moved from 0xf00 */
+	STD_EXCEPTION_PSERIES(., performance_monitor)
+	STD_EXCEPTION_PSERIES(., altivec_unavailable)
+	STD_EXCEPTION_PSERIES(., vsx_unavailable)
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt:
+	stb	r10,PACAHARDIRQEN(r13)
+	mtcrf	0x80,r9
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	mfspr	r10,SPRN_SRR1
+	rldicl	r10,r10,48,1		/* clear MSR_EE */
+	rotldi	r10,r10,16
+	mtspr	SPRN_SRR1,r10
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	mfspr	r13,SPRN_SPRG1
+	rfid
+	b	.
+
+	.align	7
+do_stab_bolted_pSeries:
+	mtcrf	0x80,r12
+	mfspr	r12,SPRN_SPRG2
+	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Vectors for the FWNMI option.  Share common code.
+ */
+	.globl system_reset_fwnmi
+      .align 7
+system_reset_fwnmi:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+
+	.globl machine_check_fwnmi
+      .align 7
+machine_check_fwnmi:
+	HMT_MEDIUM
+	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+#endif /* CONFIG_PPC_PSERIES */
+
+#ifdef __DISABLED__
+/*
+ * This is used for when the SLB miss handler has to go virtual,
+ * which doesn't happen for now anymore but will once we re-implement
+ * dynamic VSIDs for shared page tables
+ */
+slb_miss_user_pseries:
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r10,SPRG1
+	ld	r11,PACA_EXSLB+EX_R9(r13)
+	ld	r12,PACA_EXSLB+EX_R3(r13)
+	std	r10,PACA_EXGEN+EX_R13(r13)
+	std	r11,PACA_EXGEN+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R3(r13)
+	clrrdi	r12,r13,32
+	mfmsr	r10
+	mfspr	r11,SRR0			/* save SRR0 */
+	ori	r12,r12,slb_miss_user_common@l	/* virt addr of handler */
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
+	mtspr	SRR0,r12
+	mfspr	r12,SRR1			/* and SRR1 */
+	mtspr	SRR1,r10
+	rfid
+	b	.				/* prevent spec. execution */
+#endif /* __DISABLED__ */
+
+	.align	7
+	.globl	__end_interrupts
+__end_interrupts:
+
+/*
+ * Code from here down to __end_handlers is invoked from the
+ * exception prologs above.  Because the prologs assemble the
+ * addresses of these handlers using the LOAD_HANDLER macro,
+ * which uses an addi instruction, these handlers must be in
+ * the first 32k of the kernel image.
+ */
+
+/*** Common interrupt handlers ***/
+
+	STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
+
+	/*
+	 * Machine check is different because we use a different
+	 * save area: PACA_EXMC instead of PACA_EXGEN.
+	 */
+	.align	7
+	.globl machine_check_common
+machine_check_common:
+	EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
+	FINISH_NAP
+	DISABLE_INTS
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.machine_check_exception
+	b	.ret_from_except
+
+	STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
+	STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
+	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
+	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
+	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
+	STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
+	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
+#ifdef CONFIG_ALTIVEC
+	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
+#else
+	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
+#endif
+#ifdef CONFIG_CBE_RAS
+	STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
+	STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
+	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
+#endif /* CONFIG_CBE_RAS */
+
+	.align	7
+system_call_entry:
+	b	system_call_common
+
+/*
+ * Here we have detected that the kernel stack pointer is bad.
+ * R9 contains the saved CR, r13 points to the paca,
+ * r10 contains the (bad) kernel stack pointer,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * We switch to using an emergency stack, save the registers there,
+ * and call kernel_bad_stack(), which panics.
+ */
+bad_stack:
+	ld	r1,PACAEMERGSP(r13)
+	subi	r1,r1,64+INT_FRAME_SIZE
+	std	r9,_CCR(r1)
+	std	r10,GPR1(r1)
+	std	r11,_NIP(r1)
+	std	r12,_MSR(r1)
+	mfspr	r11,SPRN_DAR
+	mfspr	r12,SPRN_DSISR
+	std	r11,_DAR(r1)
+	std	r12,_DSISR(r1)
+	mflr	r10
+	mfctr	r11
+	mfxer	r12
+	std	r10,_LINK(r1)
+	std	r11,_CTR(r1)
+	std	r12,_XER(r1)
+	SAVE_GPR(0,r1)
+	SAVE_GPR(2,r1)
+	SAVE_4GPRS(3,r1)
+	SAVE_2GPRS(7,r1)
+	SAVE_10GPRS(12,r1)
+	SAVE_10GPRS(22,r1)
+	lhz	r12,PACA_TRAP_SAVE(r13)
+	std	r12,_TRAP(r1)
+	addi	r11,r1,INT_FRAME_SIZE
+	std	r11,0(r1)
+	li	r12,0
+	std	r12,0(r11)
+	ld	r2,PACATOC(r13)
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.kernel_bad_stack
+	b	1b
+
+/*
+ * Here r13 points to the paca, r9 contains the saved CR,
+ * SRR0 and SRR1 are saved in r11 and r12,
+ * r9 - r13 are saved in paca->exgen.
+ */
+	.align	7
+	.globl data_access_common
+data_access_common:
+	mfspr	r10,SPRN_DAR
+	std	r10,PACA_EXGEN+EX_DAR(r13)
+	mfspr	r10,SPRN_DSISR
+	stw	r10,PACA_EXGEN+EX_DSISR(r13)
+	EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
+	ld	r3,PACA_EXGEN+EX_DAR(r13)
+	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
+	li	r5,0x300
+	b	.do_hash_page	 	/* Try to handle as hpte fault */
+
+	.align	7
+	.globl instruction_access_common
+instruction_access_common:
+	EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
+	ld	r3,_NIP(r1)
+	andis.	r4,r12,0x5820
+	li	r5,0x400
+	b	.do_hash_page		/* Try to handle as hpte fault */
+
+/*
+ * Here is the common SLB miss user that is used when going to virtual
+ * mode for SLB misses, that is currently not used
+ */
+#ifdef __DISABLED__
+	.align	7
+	.globl	slb_miss_user_common
+slb_miss_user_common:
+	mflr	r10
+	std	r3,PACA_EXGEN+EX_DAR(r13)
+	stw	r9,PACA_EXGEN+EX_CCR(r13)
+	std	r10,PACA_EXGEN+EX_LR(r13)
+	std	r11,PACA_EXGEN+EX_SRR0(r13)
+	bl	.slb_allocate_user
+
+	ld	r10,PACA_EXGEN+EX_LR(r13)
+	ld	r3,PACA_EXGEN+EX_R3(r13)
+	lwz	r9,PACA_EXGEN+EX_CCR(r13)
+	ld	r11,PACA_EXGEN+EX_SRR0(r13)
+	mtlr	r10
+	beq-	slb_miss_fault
+
+	andi.	r10,r12,MSR_RI		/* check for unrecoverable exception */
+	beq-	unrecov_user_slb
+	mfmsr	r10
+
+.machine push
+.machine "power4"
+	mtcrf	0x80,r9
+.machine pop
+
+	clrrdi	r10,r10,2		/* clear RI before setting SRR0/1 */
+	mtmsrd	r10,1
+
+	mtspr	SRR0,r11
+	mtspr	SRR1,r12
+
+	ld	r9,PACA_EXGEN+EX_R9(r13)
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r12,PACA_EXGEN+EX_R12(r13)
+	ld	r13,PACA_EXGEN+EX_R13(r13)
+	rfid
+	b	.
+
+slb_miss_fault:
+	EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
+	ld	r4,PACA_EXGEN+EX_DAR(r13)
+	li	r5,0
+	std	r4,_DAR(r1)
+	std	r5,_DSISR(r1)
+	b	handle_page_fault
+
+unrecov_user_slb:
+	EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
+	DISABLE_INTS
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
+#endif /* __DISABLED__ */
+
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+	mflr	r10
+#ifdef CONFIG_RELOCATABLE
+	mtctr	r11
+#endif
+
+	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
+	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
+
+	bl	.slb_allocate_realmode
+
+	/* All done -- return from exception. */
+
+	ld	r10,PACA_EXSLB+EX_LR(r13)
+	ld	r3,PACA_EXSLB+EX_R3(r13)
+	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+	ld	r11,PACALPPACAPTR(r13)
+	ld	r11,LPPACASRR0(r11)		/* get SRR0 value */
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+
+	mtlr	r10
+
+	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
+	beq-	2f
+
+.machine	push
+.machine	"power4"
+	mtcrf	0x80,r9
+	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
+.machine	pop
+
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+	ld	r9,PACA_EXSLB+EX_R9(r13)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	ld	r11,PACA_EXSLB+EX_R11(r13)
+	ld	r12,PACA_EXSLB+EX_R12(r13)
+	ld	r13,PACA_EXSLB+EX_R13(r13)
+	rfid
+	b	.	/* prevent speculative execution */
+
+2:
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+	b	unrecov_slb
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+	mfspr	r11,SPRN_SRR0
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10,unrecov_slb)
+	mtspr	SPRN_SRR0,r10
+	ld	r10,PACAKMSR(r13)
+	mtspr	SPRN_SRR1,r10
+	rfid
+	b	.
+
+unrecov_slb:
+	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+	DISABLE_INTS
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
+	.align	7
+	.globl hardware_interrupt_common
+	.globl hardware_interrupt_entry
+hardware_interrupt_common:
+	EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
+	FINISH_NAP
+hardware_interrupt_entry:
+	DISABLE_INTS
+BEGIN_FTR_SECTION
+	bl	.ppc64_runlatch_on
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.do_IRQ
+	b	.ret_from_except_lite
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+	andc	r9,r9,r10
+	std	r9,TI_LOCAL_FLAGS(r11)
+	ld	r10,_LINK(r1)		/* make idle task do the */
+	std	r10,_NIP(r1)		/* equivalent of a blr */
+	blr
+#endif
+
+	.align	7
+	.globl alignment_common
+alignment_common:
+	mfspr	r10,SPRN_DAR
+	std	r10,PACA_EXGEN+EX_DAR(r13)
+	mfspr	r10,SPRN_DSISR
+	stw	r10,PACA_EXGEN+EX_DSISR(r13)
+	EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
+	ld	r3,PACA_EXGEN+EX_DAR(r13)
+	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
+	std	r3,_DAR(r1)
+	std	r4,_DSISR(r1)
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.alignment_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl program_check_common
+program_check_common:
+	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.program_check_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl fp_unavailable_common
+fp_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
+	bne	1f			/* if from user, just load it up */
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.kernel_fp_unavailable_exception
+	BUG_OPCODE
+1:	bl	.load_up_fpu
+	b	fast_exception_return
+
+	.align	7
+	.globl altivec_unavailable_common
+altivec_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	beq	1f
+	bl	.load_up_altivec
+	b	fast_exception_return
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.altivec_unavailable_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl vsx_unavailable_common
+vsx_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	bne	.load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.vsx_unavailable_exception
+	b	.ret_from_except
+
+	.align	7
+	.globl	__end_handlers
+__end_handlers:
+
+/*
+ * Return from an exception with minimal checks.
+ * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
+ * If interrupts have been enabled, or anything has been
+ * done that might have changed the scheduling status of
+ * any task or sent any task a signal, you should use
+ * ret_from_except or ret_from_except_lite instead of this.
+ */
+fast_exc_return_irq:			/* restores irq state too */
+	ld	r3,SOFTE(r1)
+	TRACE_AND_RESTORE_IRQ(r3);
+	ld	r12,_MSR(r1)
+	rldicl	r4,r12,49,63		/* get MSR_EE to LSB */
+	stb	r4,PACAHARDIRQEN(r13)	/* restore paca->hard_enabled */
+	b	1f
+
+	.globl	fast_exception_return
+fast_exception_return:
+	ld	r12,_MSR(r1)
+1:	ld	r11,_NIP(r1)
+	andi.	r3,r12,MSR_RI		/* check if RI is set */
+	beq-	unrecov_fer
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	andi.	r3,r12,MSR_PR
+	beq	2f
+	ACCOUNT_CPU_USER_EXIT(r3, r4)
+2:
+#endif
+
+	ld	r3,_CCR(r1)
+	ld	r4,_LINK(r1)
+	ld	r5,_CTR(r1)
+	ld	r6,_XER(r1)
+	mtcr	r3
+	mtlr	r4
+	mtctr	r5
+	mtxer	r6
+	REST_GPR(0, r1)
+	REST_8GPRS(2, r1)
+
+	mfmsr	r10
+	rldicl	r10,r10,48,1		/* clear EE */
+	rldicr	r10,r10,16,61		/* clear RI (LE is 0 already) */
+	mtmsrd	r10,1
+
+	mtspr	SPRN_SRR1,r12
+	mtspr	SPRN_SRR0,r11
+	REST_4GPRS(10, r1)
+	ld	r1,GPR1(r1)
+	rfid
+	b	.	/* prevent speculative execution */
+
+unrecov_fer:
+	bl	.save_nvgprs
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.unrecoverable_exception
+	b	1b
+
+
+/*
+ * Hash table stuff
+ */
+	.align	7
+_STATIC(do_hash_page)
+	std	r3,_DAR(r1)
+	std	r4,_DSISR(r1)
+
+	andis.	r0,r4,0xa450		/* weird error? */
+	bne-	handle_page_fault	/* if not, try to insert a HPTE */
+BEGIN_FTR_SECTION
+	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
+	bne-	do_ste_alloc		/* If so handle it */
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+
+	/*
+	 * On iSeries, we soft-disable interrupts here, then
+	 * hard-enable interrupts so that the hash_page code can spin on
+	 * the hash_table_lock without problems on a shared processor.
+	 */
+	DISABLE_INTS
+
+	/*
+	 * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
+	 * and will clobber volatile registers when irq tracing is enabled
+	 * so we need to reload them. It may be possible to be smarter here
+	 * and move the irq tracing elsewhere but let's keep it simple for
+	 * now
+	 */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	ld	r3,_DAR(r1)
+	ld	r4,_DSISR(r1)
+	ld	r5,_TRAP(r1)
+	ld	r12,_MSR(r1)
+	clrrdi	r5,r5,4
+#endif /* CONFIG_TRACE_IRQFLAGS */
+	/*
+	 * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
+	 * accessing a userspace segment (even from the kernel). We assume
+	 * kernel addresses always have the high bit set.
+	 */
+	rlwinm	r4,r4,32-25+9,31-9,31-9	/* DSISR_STORE -> _PAGE_RW */
+	rotldi	r0,r3,15		/* Move high bit into MSR_PR posn */
+	orc	r0,r12,r0		/* MSR_PR | ~high_bit */
+	rlwimi	r4,r0,32-13,30,30	/* becomes _PAGE_USER access bit */
+	ori	r4,r4,1			/* add _PAGE_PRESENT */
+	rlwimi	r4,r5,22+2,31-2,31-2	/* Set _PAGE_EXEC if trap is 0x400 */
+
+	/*
+	 * r3 contains the faulting address
+	 * r4 contains the required access permissions
+	 * r5 contains the trap number
+	 *
+	 * at return r3 = 0 for success
+	 */
+	bl	.hash_page		/* build HPTE if possible */
+	cmpdi	r3,0			/* see if hash_page succeeded */
+
+BEGIN_FW_FTR_SECTION
+	/*
+	 * If we had interrupts soft-enabled at the point where the
+	 * DSI/ISI occurred, and an interrupt came in during hash_page,
+	 * handle it now.
+	 * We jump to ret_from_except_lite rather than fast_exception_return
+	 * because ret_from_except_lite will check for and handle pending
+	 * interrupts if necessary.
+	 */
+	beq	13f
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+
+BEGIN_FW_FTR_SECTION
+	/*
+	 * Here we have interrupts hard-disabled, so it is sufficient
+	 * to restore paca->{soft,hard}_enable and get out.
+	 */
+	beq	fast_exc_return_irq	/* Return from exception on success */
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+
+	/* For a hash failure, we don't bother re-enabling interrupts */
+	ble-	12f
+
+	/*
+	 * hash_page couldn't handle it, set soft interrupt enable back
+	 * to what it was before the trap.  Note that .raw_local_irq_restore
+	 * handles any interrupts pending at this point.
+	 */
+	ld	r3,SOFTE(r1)
+	TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
+	bl	.raw_local_irq_restore
+	b	11f
+
+/* Here we have a page fault that hash_page can't handle. */
+handle_page_fault:
+	ENABLE_INTS
+11:	ld	r4,_DAR(r1)
+	ld	r5,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.do_page_fault
+	cmpdi	r3,0
+	beq+	13f
+	bl	.save_nvgprs
+	mr	r5,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	lwz	r4,_DAR(r1)
+	bl	.bad_page_fault
+	b	.ret_from_except
+
+13:	b	.ret_from_except_lite
+
+/* We have a page fault that hash_page could handle but HV refused
+ * the PTE insertion
+ */
+12:	bl	.save_nvgprs
+	mr	r5,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ld	r4,_DAR(r1)
+	bl	.low_hash_fault
+	b	.ret_from_except
+
+	/* here we have a segment miss */
+do_ste_alloc:
+	bl	.ste_allocate		/* try to insert stab entry */
+	cmpdi	r3,0
+	bne-	handle_page_fault
+	b	fast_exception_return
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * r9 - r13 are saved in paca->exslb.
+ * We assume we aren't going to take any exceptions during this procedure.
+ * We assume (DAR >> 60) == 0xc.
+ */
+	.align	7
+_GLOBAL(do_stab_bolted)
+	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
+	std	r11,PACA_EXSLB+EX_SRR0(r13)	/* save SRR0 in exc. frame */
+
+	/* Hash to the primary group */
+	ld	r10,PACASTABVIRT(r13)
+	mfspr	r11,SPRN_DAR
+	srdi	r11,r11,28
+	rldimi	r10,r11,7,52	/* r10 = first ste of the group */
+
+	/* Calculate VSID */
+	/* This is a kernel address, so protovsid = ESID */
+	ASM_VSID_SCRAMBLE(r11, r9, 256M)
+	rldic	r9,r11,12,16	/* r9 = vsid << 12 */
+
+	/* Search the primary group for a free entry */
+1:	ld	r11,0(r10)	/* Test valid bit of the current ste	*/
+	andi.	r11,r11,0x80
+	beq	2f
+	addi	r10,r10,16
+	andi.	r11,r10,0x70
+	bne	1b
+
+	/* Stick for only searching the primary group for now.		*/
+	/* At least for now, we use a very simple random castout scheme */
+	/* Use the TB as a random number ;  OR in 1 to avoid entry 0	*/
+	mftb	r11
+	rldic	r11,r11,4,57	/* r11 = (r11 << 4) & 0x70 */
+	ori	r11,r11,0x10
+
+	/* r10 currently points to an ste one past the group of interest */
+	/* make it point to the randomly selected entry			*/
+	subi	r10,r10,128
+	or 	r10,r10,r11	/* r10 is the entry to invalidate	*/
+
+	isync			/* mark the entry invalid		*/
+	ld	r11,0(r10)
+	rldicl	r11,r11,56,1	/* clear the valid bit */
+	rotldi	r11,r11,8
+	std	r11,0(r10)
+	sync
+
+	clrrdi	r11,r11,28	/* Get the esid part of the ste		*/
+	slbie	r11
+
+2:	std	r9,8(r10)	/* Store the vsid part of the ste	*/
+	eieio
+
+	mfspr	r11,SPRN_DAR		/* Get the new esid			*/
+	clrrdi	r11,r11,28	/* Permits a full 32b of ESID		*/
+	ori	r11,r11,0x90	/* Turn on valid and kp			*/
+	std	r11,0(r10)	/* Put new entry back into the stab	*/
+
+	sync
+
+	/* All done -- return from exception. */
+	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
+	ld	r11,PACA_EXSLB+EX_SRR0(r13)	/* get saved SRR0 */
+
+	andi.	r10,r12,MSR_RI
+	beq-	unrecov_slb
+
+	mtcrf	0x80,r9			/* restore CR */
+
+	mfmsr	r10
+	clrrdi	r10,r10,2
+	mtmsrd	r10,1
+
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+	ld	r9,PACA_EXSLB+EX_R9(r13)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	ld	r11,PACA_EXSLB+EX_R11(r13)
+	ld	r12,PACA_EXSLB+EX_R12(r13)
+	ld	r13,PACA_EXSLB+EX_R13(r13)
+	rfid
+	b	.	/* prevent speculative execution */
+
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on).  The address is given to the hv
+ * as a page number (see xLparMap below), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+	. = STAB0_OFFSET	/* 0x6000 */
+	.globl initial_stab
+initial_stab:
+	.space	4096
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ */
+	.= 0x7000
+	.globl fwnmi_data_area
+fwnmi_data_area:
+#endif /* CONFIG_PPC_PSERIES */
+
+	/* iSeries does not use the FWNMI stuff, so it is safe to put
+	 * this here, even if we later allow kernels that will boot on
+	 * both pSeries and iSeries */
+#ifdef CONFIG_PPC_ISERIES
+        . = LPARMAP_PHYS
+	.globl xLparMap
+xLparMap:
+	.quad	HvEsidsToMap		/* xNumberEsids */
+	.quad	HvRangesToMap		/* xNumberRanges */
+	.quad	STAB0_PAGE		/* xSegmentTableOffs */
+	.zero	40			/* xRsvd */
+	/* xEsids (HvEsidsToMap entries of 2 quads) */
+	.quad	PAGE_OFFSET_ESID	/* xKernelEsid */
+	.quad	PAGE_OFFSET_VSID	/* xKernelVsid */
+	.quad	VMALLOC_START_ESID	/* xKernelEsid */
+	.quad	VMALLOC_START_VSID	/* xKernelVsid */
+	/* xRanges (HvRangesToMap entries of 3 quads) */
+	.quad	HvPagesToMap		/* xPages */
+	.quad	0			/* xOffset */
+	.quad	PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT)	/* xVPN */
+
+#endif /* CONFIG_PPC_ISERIES */
+
+#ifdef CONFIG_PPC_PSERIES
+        . = 0x8000
+#endif /* CONFIG_PPC_PSERIES */
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 2d182f119d1..1b12696cca0 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -23,25 +23,14 @@
 #include <asm/code-patching.h>
 #include <asm/ftrace.h>
 
-#ifdef CONFIG_PPC32
-# define GET_ADDR(addr) addr
-#else
-/* PowerPC64's functions are data that points to the functions */
-# define GET_ADDR(addr) (*(unsigned long *)addr)
-#endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-static unsigned int ftrace_nop_replace(void)
-{
-	return PPC_INST_NOP;
-}
-
 static unsigned int
 ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
 {
 	unsigned int op;
 
-	addr = GET_ADDR(addr);
+	addr = ppc_function_entry((void *)addr);
 
 	/* if (link) set op to 'bl' else 'b' */
 	op = create_branch((unsigned int *)ip, addr, link ? 1 : 0);
@@ -49,14 +38,6 @@ ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
 	return op;
 }
 
-#ifdef CONFIG_PPC64
-# define _ASM_ALIGN	" .align 3 "
-# define _ASM_PTR	" .llong "
-#else
-# define _ASM_ALIGN	" .align 2 "
-# define _ASM_PTR	" .long "
-#endif
-
 static int
 ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new)
 {
@@ -197,7 +178,7 @@ __ftrace_make_nop(struct module *mod,
 	ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
 
 	/* This should match what was called */
-	if (ptr != GET_ADDR(addr)) {
+	if (ptr != ppc_function_entry((void *)addr)) {
 		printk(KERN_ERR "addr does not match %lx\n", ptr);
 		return -EINVAL;
 	}
@@ -328,7 +309,7 @@ int ftrace_make_nop(struct module *mod,
 	if (test_24bit_addr(ip, addr)) {
 		/* within range */
 		old = ftrace_call_replace(ip, addr, 1);
-		new = ftrace_nop_replace();
+		new = PPC_INST_NOP;
 		return ftrace_modify_code(ip, old, new);
 	}
 
@@ -466,7 +447,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	 */
 	if (test_24bit_addr(ip, addr)) {
 		/* within range */
-		old = ftrace_nop_replace();
+		old = PPC_INST_NOP;
 		new = ftrace_call_replace(ip, addr, 1);
 		return ftrace_modify_code(ip, old, new);
 	}
@@ -570,7 +551,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return_hooker = (unsigned long)&mod_return_to_handler;
 #endif
 
-	return_hooker = GET_ADDR(return_hooker);
+	return_hooker = ppc_function_entry((void *)return_hooker);
 
 	/*
 	 * Protect against fault, even if it shouldn't
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index c01467f952d..48469463f89 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -733,9 +733,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
 AltiVecUnavailable:
 	EXCEPTION_PROLOG
 #ifdef CONFIG_ALTIVEC
-	bne	load_up_altivec		/* if from user, just load it up */
+	beq	1f
+	bl	load_up_altivec		/* if from user, just load it up */
+	b	fast_exception_return
 #endif /* CONFIG_ALTIVEC */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
 
 PerformanceMonitor:
@@ -743,101 +745,6 @@ PerformanceMonitor:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_STD(0xf00, performance_monitor_exception)
 
-#ifdef CONFIG_ALTIVEC
-/* Note that the AltiVec support is closely modeled after the FP
- * support.  Changes to one are likely to be applicable to the
- * other!  */
-load_up_altivec:
-/*
- * Disable AltiVec for the task which had AltiVec previously,
- * and save its AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- * On SMP we know the AltiVec units are free, since we give it up every
- * switch.  -- Kumar
- */
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-/*
- * For SMP, we don't do lazy AltiVec switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altivec in switch_to.
- */
-#ifndef CONFIG_SMP
-	tophys(r6,0)
-	addis	r3,r6,last_task_used_altivec@ha
-	lwz	r4,last_task_used_altivec@l(r3)
-	cmpwi	0,r4,0
-	beq	1f
-	add	r4,r4,r6
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
-	SAVE_32VRS(0,r10,r4)
-	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
-	lwz	r5,PT_REGS(r4)
-	add	r5,r5,r6
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10	/* disable altivec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* enable use of AltiVec after return */
-	oris	r9,r9,MSR_VEC@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
-	li	r4,1
-	li	r10,THREAD_VSCR
-	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
-	mtvscr	vr0
-	REST_32VRS(0,r10,r5)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	sub	r4,r4,r6
-	stw	r4,last_task_used_altivec@l(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
-
-/*
- * giveup_altivec(tsk)
- * Disable AltiVec for the task given as the argument,
- * and save the AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- */
-
-	.globl	giveup_altivec
-giveup_altivec:
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	SYNC
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-	cmpwi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	lwz	r5,PT_REGS(r3)
-	cmpwi	0,r5,0
-	SAVE_32VRS(0, r4, r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VEC@h
-	andc	r4,r4,r3		/* disable AltiVec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_altivec@ha
-	stw	r5,last_task_used_altivec@l(r4)
-#endif /* CONFIG_SMP */
-	blr
-#endif /* CONFIG_ALTIVEC */
 
 /*
  * This code is jumped to from the startup code to copy
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 50ef505b8fb..012505ebd9f 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -12,8 +12,9 @@
  *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
  *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
  *
- *  This file contains the low-level support and setup for the
- *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *  This file contains the entry point for the 64-bit kernel along
+ *  with some early initialization code common to all 64-bit powerpc
+ *  variants.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -38,36 +39,25 @@
 #include <asm/exception.h>
 #include <asm/irqflags.h>
 
-/*
- * We layout physical memory as follows:
- * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
- * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 -        : Early init and support code
- */
-
-/*
- *   SPRG Usage
- *
- *   Register	Definition
- *
- *   SPRG0	reserved for hypervisor
- *   SPRG1	temp - used to save gpr
- *   SPRG2	temp - used to save gpr
- *   SPRG3	virt addr of paca
+/* The physical memory is layed out such that the secondary processor
+ * spin code sits at 0x0000...0x00ff. On server, the vectors follow
+ * using the layout described in exceptions-64s.S
  */
 
 /*
  * Entering into this code we make the following assumptions:
- *  For pSeries:
+ *
+ *  For pSeries or server processors:
  *   1. The MMU is off & open firmware is running in real mode.
  *   2. The kernel is entered at __start
  *
  *  For iSeries:
  *   1. The MMU is on (as it always is for iSeries)
  *   2. The kernel is entered at system_reset_iSeries
+ *
+ *  For Book3E processors:
+ *   1. The MMU is on running in AS0 in a state defined in ePAPR
+ *   2. The kernel is entered at __start
  */
 
 	.text
@@ -166,1065 +156,14 @@ exception_marker:
 	.text
 
 /*
- * This is the start of the interrupt handlers for pSeries
- * This code runs with relocation off.
- * Code from here to __end_interrupts gets copied down to real
- * address 0x100 when we are running a relocatable kernel.
- * Therefore any relative branches in this section must only
- * branch to labels in this section.
- */
-	. = 0x100
-	.globl __start_interrupts
-__start_interrupts:
-
-	STD_EXCEPTION_PSERIES(0x100, system_reset)
-
-	. = 0x200
-_machine_check_pSeries:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
-	. = 0x300
-	.globl data_access_pSeries
-data_access_pSeries:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG2,r12
-	mfspr	r13,SPRN_DAR
-	mfspr	r12,SPRN_DSISR
-	srdi	r13,r13,60
-	rlwimi	r13,r12,16,0x20
-	mfcr	r12
-	cmpwi	r13,0x2c
-	beq	do_stab_bolted_pSeries
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
-
-	. = 0x380
-	.globl data_access_slb_pSeries
-data_access_slb_pSeries:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r3,SPRN_DAR
-	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
-	mfcr	r9
-#ifdef __DISABLED__
-	/* Keep that around for when we re-implement dynamic VSIDs */
-	cmpdi	r3,0
-	bge	slb_miss_user_pseries
-#endif /* __DISABLED__ */
-	std	r10,PACA_EXSLB+EX_R10(r13)
-	std	r11,PACA_EXSLB+EX_R11(r13)
-	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
-	std	r10,PACA_EXSLB+EX_R13(r13)
-	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-#ifndef CONFIG_RELOCATABLE
-	b	.slb_miss_realmode
-#else
-	/*
-	 * We can't just use a direct branch to .slb_miss_realmode
-	 * because the distance from here to there depends on where
-	 * the kernel ends up being put.
-	 */
-	mfctr	r11
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, .slb_miss_realmode)
-	mtctr	r10
-	bctr
-#endif
-
-	STD_EXCEPTION_PSERIES(0x400, instruction_access)
-
-	. = 0x480
-	.globl instruction_access_slb_pSeries
-instruction_access_slb_pSeries:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
-	std	r3,PACA_EXSLB+EX_R3(r13)
-	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
-	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
-	mfcr	r9
-#ifdef __DISABLED__
-	/* Keep that around for when we re-implement dynamic VSIDs */
-	cmpdi	r3,0
-	bge	slb_miss_user_pseries
-#endif /* __DISABLED__ */
-	std	r10,PACA_EXSLB+EX_R10(r13)
-	std	r11,PACA_EXSLB+EX_R11(r13)
-	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
-	std	r10,PACA_EXSLB+EX_R13(r13)
-	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-#ifndef CONFIG_RELOCATABLE
-	b	.slb_miss_realmode
-#else
-	mfctr	r11
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10, .slb_miss_realmode)
-	mtctr	r10
-	bctr
-#endif
-
-	MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
-	STD_EXCEPTION_PSERIES(0x600, alignment)
-	STD_EXCEPTION_PSERIES(0x700, program_check)
-	STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
-	MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
-	STD_EXCEPTION_PSERIES(0xa00, trap_0a)
-	STD_EXCEPTION_PSERIES(0xb00, trap_0b)
-
-	. = 0xc00
-	.globl	system_call_pSeries
-system_call_pSeries:
-	HMT_MEDIUM
-BEGIN_FTR_SECTION
-	cmpdi	r0,0x1ebe
-	beq-	1f
-END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
-	mr	r9,r13
-	mfspr	r13,SPRN_SPRG3
-	mfspr	r11,SPRN_SRR0
-	ld	r12,PACAKBASE(r13)
-	ld	r10,PACAKMSR(r13)
-	LOAD_HANDLER(r12, system_call_entry)
-	mtspr	SPRN_SRR0,r12
-	mfspr	r12,SPRN_SRR1
-	mtspr	SPRN_SRR1,r10
-	rfid
-	b	.	/* prevent speculative execution */
-
-/* Fast LE/BE switch system call */
-1:	mfspr	r12,SPRN_SRR1
-	xori	r12,r12,MSR_LE
-	mtspr	SPRN_SRR1,r12
-	rfid		/* return to userspace */
-	b	.
-
-	STD_EXCEPTION_PSERIES(0xd00, single_step)
-	STD_EXCEPTION_PSERIES(0xe00, trap_0e)
-
-	/* We need to deal with the Altivec unavailable exception
-	 * here which is at 0xf20, thus in the middle of the
-	 * prolog code of the PerformanceMonitor one. A little
-	 * trickery is thus necessary
-	 */
-	. = 0xf00
-	b	performance_monitor_pSeries
-
-	. = 0xf20
-	b	altivec_unavailable_pSeries
-
-	. = 0xf40
-	b	vsx_unavailable_pSeries
-
-#ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
-#endif /* CONFIG_CBE_RAS */
-	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
-#ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
-#endif /* CONFIG_CBE_RAS */
-	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
-#ifdef CONFIG_CBE_RAS
-	HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
-#endif /* CONFIG_CBE_RAS */
-
-	. = 0x3000
-
-/*** pSeries interrupt support ***/
-
-	/* moved from 0xf00 */
-	STD_EXCEPTION_PSERIES(., performance_monitor)
-	STD_EXCEPTION_PSERIES(., altivec_unavailable)
-	STD_EXCEPTION_PSERIES(., vsx_unavailable)
-
-/*
- * An interrupt came in while soft-disabled; clear EE in SRR1,
- * clear paca->hard_enabled and return.
- */
-masked_interrupt:
-	stb	r10,PACAHARDIRQEN(r13)
-	mtcrf	0x80,r9
-	ld	r9,PACA_EXGEN+EX_R9(r13)
-	mfspr	r10,SPRN_SRR1
-	rldicl	r10,r10,48,1		/* clear MSR_EE */
-	rotldi	r10,r10,16
-	mtspr	SPRN_SRR1,r10
-	ld	r10,PACA_EXGEN+EX_R10(r13)
-	mfspr	r13,SPRN_SPRG1
-	rfid
-	b	.
-
-	.align	7
-do_stab_bolted_pSeries:
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
-	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Vectors for the FWNMI option.  Share common code.
- */
-	.globl system_reset_fwnmi
-      .align 7
-system_reset_fwnmi:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
-
-	.globl machine_check_fwnmi
-      .align 7
-machine_check_fwnmi:
-	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
-#endif /* CONFIG_PPC_PSERIES */
-
-#ifdef __DISABLED__
-/*
- * This is used for when the SLB miss handler has to go virtual,
- * which doesn't happen for now anymore but will once we re-implement
- * dynamic VSIDs for shared page tables
- */
-slb_miss_user_pseries:
-	std	r10,PACA_EXGEN+EX_R10(r13)
-	std	r11,PACA_EXGEN+EX_R11(r13)
-	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r10,SPRG1
-	ld	r11,PACA_EXSLB+EX_R9(r13)
-	ld	r12,PACA_EXSLB+EX_R3(r13)
-	std	r10,PACA_EXGEN+EX_R13(r13)
-	std	r11,PACA_EXGEN+EX_R9(r13)
-	std	r12,PACA_EXGEN+EX_R3(r13)
-	clrrdi	r12,r13,32
-	mfmsr	r10
-	mfspr	r11,SRR0			/* save SRR0 */
-	ori	r12,r12,slb_miss_user_common@l	/* virt addr of handler */
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
-	mtspr	SRR0,r12
-	mfspr	r12,SRR1			/* and SRR1 */
-	mtspr	SRR1,r10
-	rfid
-	b	.				/* prevent spec. execution */
-#endif /* __DISABLED__ */
-
-	.align	7
-	.globl	__end_interrupts
-__end_interrupts:
-
-/*
- * Code from here down to __end_handlers is invoked from the
- * exception prologs above.  Because the prologs assemble the
- * addresses of these handlers using the LOAD_HANDLER macro,
- * which uses an addi instruction, these handlers must be in
- * the first 32k of the kernel image.
- */
-
-/*** Common interrupt handlers ***/
-
-	STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
-
-	/*
-	 * Machine check is different because we use a different
-	 * save area: PACA_EXMC instead of PACA_EXGEN.
-	 */
-	.align	7
-	.globl machine_check_common
-machine_check_common:
-	EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
-	FINISH_NAP
-	DISABLE_INTS
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.machine_check_exception
-	b	.ret_from_except
-
-	STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
-	STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
-	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
-	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
-	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
-	STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
-	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
-#ifdef CONFIG_ALTIVEC
-	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
-#else
-	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
-#endif
-#ifdef CONFIG_CBE_RAS
-	STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
-	STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
-	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
-#endif /* CONFIG_CBE_RAS */
-
-	.align	7
-system_call_entry:
-	b	system_call_common
-
-/*
- * Here we have detected that the kernel stack pointer is bad.
- * R9 contains the saved CR, r13 points to the paca,
- * r10 contains the (bad) kernel stack pointer,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * We switch to using an emergency stack, save the registers there,
- * and call kernel_bad_stack(), which panics.
- */
-bad_stack:
-	ld	r1,PACAEMERGSP(r13)
-	subi	r1,r1,64+INT_FRAME_SIZE
-	std	r9,_CCR(r1)
-	std	r10,GPR1(r1)
-	std	r11,_NIP(r1)
-	std	r12,_MSR(r1)
-	mfspr	r11,SPRN_DAR
-	mfspr	r12,SPRN_DSISR
-	std	r11,_DAR(r1)
-	std	r12,_DSISR(r1)
-	mflr	r10
-	mfctr	r11
-	mfxer	r12
-	std	r10,_LINK(r1)
-	std	r11,_CTR(r1)
-	std	r12,_XER(r1)
-	SAVE_GPR(0,r1)
-	SAVE_GPR(2,r1)
-	SAVE_4GPRS(3,r1)
-	SAVE_2GPRS(7,r1)
-	SAVE_10GPRS(12,r1)
-	SAVE_10GPRS(22,r1)
-	lhz	r12,PACA_TRAP_SAVE(r13)
-	std	r12,_TRAP(r1)
-	addi	r11,r1,INT_FRAME_SIZE
-	std	r11,0(r1)
-	li	r12,0
-	std	r12,0(r11)
-	ld	r2,PACATOC(r13)
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.kernel_bad_stack
-	b	1b
-
-/*
- * Here r13 points to the paca, r9 contains the saved CR,
- * SRR0 and SRR1 are saved in r11 and r12,
- * r9 - r13 are saved in paca->exgen.
- */
-	.align	7
-	.globl data_access_common
-data_access_common:
-	mfspr	r10,SPRN_DAR
-	std	r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr	r10,SPRN_DSISR
-	stw	r10,PACA_EXGEN+EX_DSISR(r13)
-	EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
-	ld	r3,PACA_EXGEN+EX_DAR(r13)
-	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
-	li	r5,0x300
-	b	.do_hash_page	 	/* Try to handle as hpte fault */
-
-	.align	7
-	.globl instruction_access_common
-instruction_access_common:
-	EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
-	ld	r3,_NIP(r1)
-	andis.	r4,r12,0x5820
-	li	r5,0x400
-	b	.do_hash_page		/* Try to handle as hpte fault */
-
-/*
- * Here is the common SLB miss user that is used when going to virtual
- * mode for SLB misses, that is currently not used
- */
-#ifdef __DISABLED__
-	.align	7
-	.globl	slb_miss_user_common
-slb_miss_user_common:
-	mflr	r10
-	std	r3,PACA_EXGEN+EX_DAR(r13)
-	stw	r9,PACA_EXGEN+EX_CCR(r13)
-	std	r10,PACA_EXGEN+EX_LR(r13)
-	std	r11,PACA_EXGEN+EX_SRR0(r13)
-	bl	.slb_allocate_user
-
-	ld	r10,PACA_EXGEN+EX_LR(r13)
-	ld	r3,PACA_EXGEN+EX_R3(r13)
-	lwz	r9,PACA_EXGEN+EX_CCR(r13)
-	ld	r11,PACA_EXGEN+EX_SRR0(r13)
-	mtlr	r10
-	beq-	slb_miss_fault
-
-	andi.	r10,r12,MSR_RI		/* check for unrecoverable exception */
-	beq-	unrecov_user_slb
-	mfmsr	r10
-
-.machine push
-.machine "power4"
-	mtcrf	0x80,r9
-.machine pop
-
-	clrrdi	r10,r10,2		/* clear RI before setting SRR0/1 */
-	mtmsrd	r10,1
-
-	mtspr	SRR0,r11
-	mtspr	SRR1,r12
-
-	ld	r9,PACA_EXGEN+EX_R9(r13)
-	ld	r10,PACA_EXGEN+EX_R10(r13)
-	ld	r11,PACA_EXGEN+EX_R11(r13)
-	ld	r12,PACA_EXGEN+EX_R12(r13)
-	ld	r13,PACA_EXGEN+EX_R13(r13)
-	rfid
-	b	.
-
-slb_miss_fault:
-	EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
-	ld	r4,PACA_EXGEN+EX_DAR(r13)
-	li	r5,0
-	std	r4,_DAR(r1)
-	std	r5,_DSISR(r1)
-	b	handle_page_fault
-
-unrecov_user_slb:
-	EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
-	DISABLE_INTS
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-#endif /* __DISABLED__ */
-
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
-	mflr	r10
-#ifdef CONFIG_RELOCATABLE
-	mtctr	r11
-#endif
-
-	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
-	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
-
-	bl	.slb_allocate_realmode
-
-	/* All done -- return from exception. */
-
-	ld	r10,PACA_EXSLB+EX_LR(r13)
-	ld	r3,PACA_EXSLB+EX_R3(r13)
-	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	ld	r11,PACALPPACAPTR(r13)
-	ld	r11,LPPACASRR0(r11)		/* get SRR0 value */
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-
-	mtlr	r10
-
-	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
-	beq-	2f
-
-.machine	push
-.machine	"power4"
-	mtcrf	0x80,r9
-	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
-.machine	pop
-
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-	ld	r9,PACA_EXSLB+EX_R9(r13)
-	ld	r10,PACA_EXSLB+EX_R10(r13)
-	ld	r11,PACA_EXSLB+EX_R11(r13)
-	ld	r12,PACA_EXSLB+EX_R12(r13)
-	ld	r13,PACA_EXSLB+EX_R13(r13)
-	rfid
-	b	.	/* prevent speculative execution */
-
-2:
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	b	unrecov_slb
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-	mfspr	r11,SPRN_SRR0
-	ld	r10,PACAKBASE(r13)
-	LOAD_HANDLER(r10,unrecov_slb)
-	mtspr	SPRN_SRR0,r10
-	ld	r10,PACAKMSR(r13)
-	mtspr	SPRN_SRR1,r10
-	rfid
-	b	.
-
-unrecov_slb:
-	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
-	DISABLE_INTS
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-	.align	7
-	.globl hardware_interrupt_common
-	.globl hardware_interrupt_entry
-hardware_interrupt_common:
-	EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
-	FINISH_NAP
-hardware_interrupt_entry:
-	DISABLE_INTS
-BEGIN_FTR_SECTION
-	bl	.ppc64_runlatch_on
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_IRQ
-	b	.ret_from_except_lite
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
-	andc	r9,r9,r10
-	std	r9,TI_LOCAL_FLAGS(r11)
-	ld	r10,_LINK(r1)		/* make idle task do the */
-	std	r10,_NIP(r1)		/* equivalent of a blr */
-	blr
-#endif
-
-	.align	7
-	.globl alignment_common
-alignment_common:
-	mfspr	r10,SPRN_DAR
-	std	r10,PACA_EXGEN+EX_DAR(r13)
-	mfspr	r10,SPRN_DSISR
-	stw	r10,PACA_EXGEN+EX_DSISR(r13)
-	EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
-	ld	r3,PACA_EXGEN+EX_DAR(r13)
-	lwz	r4,PACA_EXGEN+EX_DSISR(r13)
-	std	r3,_DAR(r1)
-	std	r4,_DSISR(r1)
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.alignment_exception
-	b	.ret_from_except
-
-	.align	7
-	.globl program_check_common
-program_check_common:
-	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.program_check_exception
-	b	.ret_from_except
-
-	.align	7
-	.globl fp_unavailable_common
-fp_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
-	bne	1f			/* if from user, just load it up */
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.kernel_fp_unavailable_exception
-	BUG_OPCODE
-1:	bl	.load_up_fpu
-	b	fast_exception_return
-
-	.align	7
-	.globl altivec_unavailable_common
-altivec_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	beq	1f
-	bl	.load_up_altivec
-	b	fast_exception_return
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.altivec_unavailable_exception
-	b	.ret_from_except
-
-	.align	7
-	.globl vsx_unavailable_common
-vsx_unavailable_common:
-	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	bne	.load_up_vsx
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
-	bl	.save_nvgprs
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
-	bl	.vsx_unavailable_exception
-	b	.ret_from_except
-
-	.align	7
-	.globl	__end_handlers
-__end_handlers:
-
-/*
- * Return from an exception with minimal checks.
- * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
- * If interrupts have been enabled, or anything has been
- * done that might have changed the scheduling status of
- * any task or sent any task a signal, you should use
- * ret_from_except or ret_from_except_lite instead of this.
+ * On server, we include the exception vectors code here as it
+ * relies on absolute addressing which is only possible within
+ * this compilation unit
  */
-fast_exc_return_irq:			/* restores irq state too */
-	ld	r3,SOFTE(r1)
-	TRACE_AND_RESTORE_IRQ(r3);
-	ld	r12,_MSR(r1)
-	rldicl	r4,r12,49,63		/* get MSR_EE to LSB */
-	stb	r4,PACAHARDIRQEN(r13)	/* restore paca->hard_enabled */
-	b	1f
-
-	.globl	fast_exception_return
-fast_exception_return:
-	ld	r12,_MSR(r1)
-1:	ld	r11,_NIP(r1)
-	andi.	r3,r12,MSR_RI		/* check if RI is set */
-	beq-	unrecov_fer
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-	andi.	r3,r12,MSR_PR
-	beq	2f
-	ACCOUNT_CPU_USER_EXIT(r3, r4)
-2:
+#ifdef CONFIG_PPC_BOOK3S
+#include "exceptions-64s.S"
 #endif
 
-	ld	r3,_CCR(r1)
-	ld	r4,_LINK(r1)
-	ld	r5,_CTR(r1)
-	ld	r6,_XER(r1)
-	mtcr	r3
-	mtlr	r4
-	mtctr	r5
-	mtxer	r6
-	REST_GPR(0, r1)
-	REST_8GPRS(2, r1)
-
-	mfmsr	r10
-	rldicl	r10,r10,48,1		/* clear EE */
-	rldicr	r10,r10,16,61		/* clear RI (LE is 0 already) */
-	mtmsrd	r10,1
-
-	mtspr	SPRN_SRR1,r12
-	mtspr	SPRN_SRR0,r11
-	REST_4GPRS(10, r1)
-	ld	r1,GPR1(r1)
-	rfid
-	b	.	/* prevent speculative execution */
-
-unrecov_fer:
-	bl	.save_nvgprs
-1:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.unrecoverable_exception
-	b	1b
-
-#ifdef CONFIG_ALTIVEC
-/*
- * load_up_altivec(unused, unused, tsk)
- * Disable VMX for the task which had it previously,
- * and save its vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- * On SMP we know the VMX is free, since we give it up every
- * switch (ie, no lazy save of the vector registers).
- * On entry: r13 == 'current' && last_task_used_altivec != 'current'
- */
-_STATIC(load_up_altivec)
-	mfmsr	r5			/* grab the current MSR */
-	oris	r5,r5,MSR_VEC@h
-	mtmsrd	r5			/* enable use of VMX now */
-	isync
-
-/*
- * For SMP, we don't do lazy VMX switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altvec in switch_to.
- * VRSAVE isn't dealt with here, that is done in the normal context
- * switch code. Note that we could rely on vrsave value to eventually
- * avoid saving all of the VREGs here...
- */
-#ifndef CONFIG_SMP
-	ld	r3,last_task_used_altivec@got(r2)
-	ld	r4,0(r3)
-	cmpdi	0,r4,0
-	beq	1f
-	/* Save VMX state to last_task_used_altivec's THREAD struct */
-	addi	r4,r4,THREAD
-	SAVE_32VRS(0,r5,r4)
-	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
-	/* Disable VMX for last_task_used_altivec */
-	ld	r5,PT_REGS(r4)
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r6,MSR_VEC@h
-	andc	r4,r4,r6
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* Hack: if we get an altivec unavailable trap with VRSAVE
-	 * set to all zeros, we assume this is a broken application
-	 * that fails to set it properly, and thus we switch it to
-	 * all 1's
-	 */
-	mfspr	r4,SPRN_VRSAVE
-	cmpdi	0,r4,0
-	bne+	1f
-	li	r4,-1
-	mtspr	SPRN_VRSAVE,r4
-1:
-	/* enable use of VMX after return */
-	ld	r4,PACACURRENT(r13)
-	addi	r5,r4,THREAD		/* Get THREAD */
-	oris	r12,r12,MSR_VEC@h
-	std	r12,_MSR(r1)
-	li	r4,1
-	li	r10,THREAD_VSCR
-	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
-	mtvscr	vr0
-	REST_32VRS(0,r4,r5)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
-	subi	r4,r5,THREAD		/* Back to 'current' */
-	std	r4,0(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	blr
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_VSX
-/*
- * load_up_vsx(unused, unused, tsk)
- * Disable VSX for the task which had it previously,
- * and save its vector registers in its thread_struct.
- * Reuse the fp and vsx saves, but first check to see if they have
- * been saved already.
- * On entry: r13 == 'current' && last_task_used_vsx != 'current'
- */
-_STATIC(load_up_vsx)
-/* Load FP and VSX registers if they haven't been done yet */
-	andi.	r5,r12,MSR_FP
-	beql+	load_up_fpu		/* skip if already loaded */
-	andis.	r5,r12,MSR_VEC@h
-	beql+	load_up_altivec		/* skip if already loaded */
-
-#ifndef CONFIG_SMP
-	ld	r3,last_task_used_vsx@got(r2)
-	ld	r4,0(r3)
-	cmpdi	0,r4,0
-	beq	1f
-	/* Disable VSX for last_task_used_vsx */
-	addi	r4,r4,THREAD
-	ld	r5,PT_REGS(r4)
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r6,MSR_VSX@h
-	andc	r6,r4,r6
-	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	ld	r4,PACACURRENT(r13)
-	addi	r4,r4,THREAD		/* Get THREAD */
-	li	r6,1
-	stw	r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
-	/* enable use of VSX after return */
-	oris	r12,r12,MSR_VSX@h
-	std	r12,_MSR(r1)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
-	ld	r4,PACACURRENT(r13)
-	std	r4,0(r3)
-#endif /* CONFIG_SMP */
-	b	fast_exception_return
-#endif /* CONFIG_VSX */
-
-/*
- * Hash table stuff
- */
-	.align	7
-_STATIC(do_hash_page)
-	std	r3,_DAR(r1)
-	std	r4,_DSISR(r1)
-
-	andis.	r0,r4,0xa450		/* weird error? */
-	bne-	handle_page_fault	/* if not, try to insert a HPTE */
-BEGIN_FTR_SECTION
-	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
-	bne-	do_ste_alloc		/* If so handle it */
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-
-	/*
-	 * On iSeries, we soft-disable interrupts here, then
-	 * hard-enable interrupts so that the hash_page code can spin on
-	 * the hash_table_lock without problems on a shared processor.
-	 */
-	DISABLE_INTS
-
-	/*
-	 * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
-	 * and will clobber volatile registers when irq tracing is enabled
-	 * so we need to reload them. It may be possible to be smarter here
-	 * and move the irq tracing elsewhere but let's keep it simple for
-	 * now
-	 */
-#ifdef CONFIG_TRACE_IRQFLAGS
-	ld	r3,_DAR(r1)
-	ld	r4,_DSISR(r1)
-	ld	r5,_TRAP(r1)
-	ld	r12,_MSR(r1)
-	clrrdi	r5,r5,4
-#endif /* CONFIG_TRACE_IRQFLAGS */
-	/*
-	 * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
-	 * accessing a userspace segment (even from the kernel). We assume
-	 * kernel addresses always have the high bit set.
-	 */
-	rlwinm	r4,r4,32-25+9,31-9,31-9	/* DSISR_STORE -> _PAGE_RW */
-	rotldi	r0,r3,15		/* Move high bit into MSR_PR posn */
-	orc	r0,r12,r0		/* MSR_PR | ~high_bit */
-	rlwimi	r4,r0,32-13,30,30	/* becomes _PAGE_USER access bit */
-	ori	r4,r4,1			/* add _PAGE_PRESENT */
-	rlwimi	r4,r5,22+2,31-2,31-2	/* Set _PAGE_EXEC if trap is 0x400 */
-
-	/*
-	 * r3 contains the faulting address
-	 * r4 contains the required access permissions
-	 * r5 contains the trap number
-	 *
-	 * at return r3 = 0 for success
-	 */
-	bl	.hash_page		/* build HPTE if possible */
-	cmpdi	r3,0			/* see if hash_page succeeded */
-
-BEGIN_FW_FTR_SECTION
-	/*
-	 * If we had interrupts soft-enabled at the point where the
-	 * DSI/ISI occurred, and an interrupt came in during hash_page,
-	 * handle it now.
-	 * We jump to ret_from_except_lite rather than fast_exception_return
-	 * because ret_from_except_lite will check for and handle pending
-	 * interrupts if necessary.
-	 */
-	beq	13f
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-
-BEGIN_FW_FTR_SECTION
-	/*
-	 * Here we have interrupts hard-disabled, so it is sufficient
-	 * to restore paca->{soft,hard}_enable and get out.
-	 */
-	beq	fast_exc_return_irq	/* Return from exception on success */
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
-
-	/* For a hash failure, we don't bother re-enabling interrupts */
-	ble-	12f
-
-	/*
-	 * hash_page couldn't handle it, set soft interrupt enable back
-	 * to what it was before the trap.  Note that .raw_local_irq_restore
-	 * handles any interrupts pending at this point.
-	 */
-	ld	r3,SOFTE(r1)
-	TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
-	bl	.raw_local_irq_restore
-	b	11f
-
-/* Here we have a page fault that hash_page can't handle. */
-handle_page_fault:
-	ENABLE_INTS
-11:	ld	r4,_DAR(r1)
-	ld	r5,_DSISR(r1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_page_fault
-	cmpdi	r3,0
-	beq+	13f
-	bl	.save_nvgprs
-	mr	r5,r3
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lwz	r4,_DAR(r1)
-	bl	.bad_page_fault
-	b	.ret_from_except
-
-13:	b	.ret_from_except_lite
-
-/* We have a page fault that hash_page could handle but HV refused
- * the PTE insertion
- */
-12:	bl	.save_nvgprs
-	mr	r5,r3
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ld	r4,_DAR(r1)
-	bl	.low_hash_fault
-	b	.ret_from_except
-
-	/* here we have a segment miss */
-do_ste_alloc:
-	bl	.ste_allocate		/* try to insert stab entry */
-	cmpdi	r3,0
-	bne-	handle_page_fault
-	b	fast_exception_return
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * r9 - r13 are saved in paca->exslb.
- * We assume we aren't going to take any exceptions during this procedure.
- * We assume (DAR >> 60) == 0xc.
- */
-	.align	7
-_GLOBAL(do_stab_bolted)
-	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
-	std	r11,PACA_EXSLB+EX_SRR0(r13)	/* save SRR0 in exc. frame */
-
-	/* Hash to the primary group */
-	ld	r10,PACASTABVIRT(r13)
-	mfspr	r11,SPRN_DAR
-	srdi	r11,r11,28
-	rldimi	r10,r11,7,52	/* r10 = first ste of the group */
-
-	/* Calculate VSID */
-	/* This is a kernel address, so protovsid = ESID */
-	ASM_VSID_SCRAMBLE(r11, r9, 256M)
-	rldic	r9,r11,12,16	/* r9 = vsid << 12 */
-
-	/* Search the primary group for a free entry */
-1:	ld	r11,0(r10)	/* Test valid bit of the current ste	*/
-	andi.	r11,r11,0x80
-	beq	2f
-	addi	r10,r10,16
-	andi.	r11,r10,0x70
-	bne	1b
-
-	/* Stick for only searching the primary group for now.		*/
-	/* At least for now, we use a very simple random castout scheme */
-	/* Use the TB as a random number ;  OR in 1 to avoid entry 0	*/
-	mftb	r11
-	rldic	r11,r11,4,57	/* r11 = (r11 << 4) & 0x70 */
-	ori	r11,r11,0x10
-
-	/* r10 currently points to an ste one past the group of interest */
-	/* make it point to the randomly selected entry			*/
-	subi	r10,r10,128
-	or 	r10,r10,r11	/* r10 is the entry to invalidate	*/
-
-	isync			/* mark the entry invalid		*/
-	ld	r11,0(r10)
-	rldicl	r11,r11,56,1	/* clear the valid bit */
-	rotldi	r11,r11,8
-	std	r11,0(r10)
-	sync
-
-	clrrdi	r11,r11,28	/* Get the esid part of the ste		*/
-	slbie	r11
-
-2:	std	r9,8(r10)	/* Store the vsid part of the ste	*/
-	eieio
-
-	mfspr	r11,SPRN_DAR		/* Get the new esid			*/
-	clrrdi	r11,r11,28	/* Permits a full 32b of ESID		*/
-	ori	r11,r11,0x90	/* Turn on valid and kp			*/
-	std	r11,0(r10)	/* Put new entry back into the stab	*/
-
-	sync
-
-	/* All done -- return from exception. */
-	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
-	ld	r11,PACA_EXSLB+EX_SRR0(r13)	/* get saved SRR0 */
-
-	andi.	r10,r12,MSR_RI
-	beq-	unrecov_slb
-
-	mtcrf	0x80,r9			/* restore CR */
-
-	mfmsr	r10
-	clrrdi	r10,r10,2
-	mtmsrd	r10,1
-
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-	ld	r9,PACA_EXSLB+EX_R9(r13)
-	ld	r10,PACA_EXSLB+EX_R10(r13)
-	ld	r11,PACA_EXSLB+EX_R11(r13)
-	ld	r12,PACA_EXSLB+EX_R12(r13)
-	ld	r13,PACA_EXSLB+EX_R13(r13)
-	rfid
-	b	.	/* prevent speculative execution */
-
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on).  The address is given to the hv
- * as a page number (see xLparMap below), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
-	. = STAB0_OFFSET	/* 0x6000 */
-	.globl initial_stab
-initial_stab:
-	.space	4096
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Data area reserved for FWNMI option.
- * This address (0x7000) is fixed by the RPA.
- */
-	.= 0x7000
-	.globl fwnmi_data_area
-fwnmi_data_area:
-#endif /* CONFIG_PPC_PSERIES */
-
-	/* iSeries does not use the FWNMI stuff, so it is safe to put
-	 * this here, even if we later allow kernels that will boot on
-	 * both pSeries and iSeries */
-#ifdef CONFIG_PPC_ISERIES
-        . = LPARMAP_PHYS
-	.globl xLparMap
-xLparMap:
-	.quad	HvEsidsToMap		/* xNumberEsids */
-	.quad	HvRangesToMap		/* xNumberRanges */
-	.quad	STAB0_PAGE		/* xSegmentTableOffs */
-	.zero	40			/* xRsvd */
-	/* xEsids (HvEsidsToMap entries of 2 quads) */
-	.quad	PAGE_OFFSET_ESID	/* xKernelEsid */
-	.quad	PAGE_OFFSET_VSID	/* xKernelVsid */
-	.quad	VMALLOC_START_ESID	/* xKernelEsid */
-	.quad	VMALLOC_START_VSID	/* xKernelVsid */
-	/* xRanges (HvRangesToMap entries of 3 quads) */
-	.quad	HvPagesToMap		/* xPages */
-	.quad	0			/* xOffset */
-	.quad	PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT)	/* xVPN */
-
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_PPC_PSERIES
-        . = 0x8000
-#endif /* CONFIG_PPC_PSERIES */
 
 /*
  * On pSeries and most other platforms, secondary processors spin
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 95f39f1e68d..5f9febc8d14 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -256,7 +256,7 @@ label:
 	 * off DE in the DSRR1 value and clearing the debug status.	      \
 	 */								      \
 	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
-	andis.	r10,r10,DBSR_IC@h;					      \
+	andis.	r10,r10,(DBSR_IC|DBSR_BT)@h;				      \
 	beq+	2f;							      \
 									      \
 	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
@@ -271,7 +271,7 @@ label:
 									      \
 	/* here it looks like we got an inappropriate debug exception. */     \
 1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CDRR1 value */     \
-	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
+	lis	r10,(DBSR_IC|DBSR_BT)@h;	/* clear the IC event */      \
 	mtspr	SPRN_DBSR,r10;						      \
 	/* restore state and get out */					      \
 	lwz	r10,_CCR(r11);						      \
@@ -309,7 +309,7 @@ label:
 	 * off DE in the CSRR1 value and clearing the debug status.	      \
 	 */								      \
 	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
-	andis.	r10,r10,DBSR_IC@h;					      \
+	andis.	r10,r10,(DBSR_IC|DBSR_BT)@h;				      \
 	beq+	2f;							      \
 									      \
 	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
@@ -317,14 +317,14 @@ label:
 	cmplw	r12,r10;						      \
 	blt+	2f;			/* addr below exception vectors */    \
 									      \
-	lis	r10,DebugCrit@h;						      \
+	lis	r10,DebugCrit@h;					      \
 	ori	r10,r10,DebugCrit@l;					      \
 	cmplw	r12,r10;						      \
 	bgt+	2f;			/* addr above exception vectors */    \
 									      \
 	/* here it looks like we got an inappropriate debug exception. */     \
 1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CSRR1 value */     \
-	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
+	lis	r10,(DBSR_IC|DBSR_BT)@h;	/* clear the IC event */      \
 	mtspr	SPRN_DBSR,r10;						      \
 	/* restore state and get out */					      \
 	lwz	r10,_CCR(r11);						      \
diff --git a/arch/powerpc/kernel/init_task.c b/arch/powerpc/kernel/init_task.c
index 688b329800b..ffc4253fef5 100644
--- a/arch/powerpc/kernel/init_task.c
+++ b/arch/powerpc/kernel/init_task.c
@@ -9,10 +9,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 844d3f882a1..f7f376ea7b1 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -118,6 +118,7 @@ notrace void raw_local_irq_restore(unsigned long en)
 	if (!en)
 		return;
 
+#ifdef CONFIG_PPC_STD_MMU_64
 	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
 		/*
 		 * Do we need to disable preemption here?  Not really: in the
@@ -135,6 +136,7 @@ notrace void raw_local_irq_restore(unsigned long en)
 		if (local_paca->lppaca_ptr->int_dword.any_int)
 			iseries_handle_interrupts();
 	}
+#endif /* CONFIG_PPC_STD_MMU_64 */
 
 	if (test_perf_counter_pending()) {
 		clear_perf_counter_pending();
@@ -254,77 +256,84 @@ void fixup_irqs(cpumask_t map)
 }
 #endif
 
-void do_IRQ(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	unsigned int irq;
 #ifdef CONFIG_IRQSTACKS
+static inline void handle_one_irq(unsigned int irq)
+{
 	struct thread_info *curtp, *irqtp;
-#endif
+	unsigned long saved_sp_limit;
+	struct irq_desc *desc;
 
-	irq_enter();
+	/* Switch to the irq stack to handle this */
+	curtp = current_thread_info();
+	irqtp = hardirq_ctx[smp_processor_id()];
+
+	if (curtp == irqtp) {
+		/* We're already on the irq stack, just handle it */
+		generic_handle_irq(irq);
+		return;
+	}
+
+	desc = irq_desc + irq;
+	saved_sp_limit = current->thread.ksp_limit;
+
+	irqtp->task = curtp->task;
+	irqtp->flags = 0;
+
+	/* Copy the softirq bits in preempt_count so that the
+	 * softirq checks work in the hardirq context. */
+	irqtp->preempt_count = (irqtp->preempt_count & ~SOFTIRQ_MASK) |
+			       (curtp->preempt_count & SOFTIRQ_MASK);
+
+	current->thread.ksp_limit = (unsigned long)irqtp +
+		_ALIGN_UP(sizeof(struct thread_info), 16);
+
+	call_handle_irq(irq, desc, irqtp, desc->handle_irq);
+	current->thread.ksp_limit = saved_sp_limit;
+	irqtp->task = NULL;
+
+	/* Set any flag that may have been set on the
+	 * alternate stack
+	 */
+	if (irqtp->flags)
+		set_bits(irqtp->flags, &curtp->flags);
+}
+#else
+static inline void handle_one_irq(unsigned int irq)
+{
+	generic_handle_irq(irq);
+}
+#endif
 
+static inline void check_stack_overflow(void)
+{
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
-	/* Debugging check for stack overflow: is there less than 2KB free? */
-	{
-		long sp;
+	long sp;
 
-		sp = __get_SP() & (THREAD_SIZE-1);
+	sp = __get_SP() & (THREAD_SIZE-1);
 
-		if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
-			printk("do_IRQ: stack overflow: %ld\n",
-				sp - sizeof(struct thread_info));
-			dump_stack();
-		}
+	/* check for stack overflow: is there less than 2KB free? */
+	if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
+		printk("do_IRQ: stack overflow: %ld\n",
+			sp - sizeof(struct thread_info));
+		dump_stack();
 	}
 #endif
+}
 
-	/*
-	 * Every platform is required to implement ppc_md.get_irq.
-	 * This function will either return an irq number or NO_IRQ to
-	 * indicate there are no more pending.
-	 * The value NO_IRQ_IGNORE is for buggy hardware and means that this
-	 * IRQ has already been handled. -- Tom
-	 */
-	irq = ppc_md.get_irq();
+void do_IRQ(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	unsigned int irq;
 
-	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
-#ifdef CONFIG_IRQSTACKS
-		/* Switch to the irq stack to handle this */
-		curtp = current_thread_info();
-		irqtp = hardirq_ctx[smp_processor_id()];
-		if (curtp != irqtp) {
-			struct irq_desc *desc = irq_desc + irq;
-			void *handler = desc->handle_irq;
-			unsigned long saved_sp_limit = current->thread.ksp_limit;
-			if (handler == NULL)
-				handler = &__do_IRQ;
-			irqtp->task = curtp->task;
-			irqtp->flags = 0;
-
-			/* Copy the softirq bits in preempt_count so that the
-			 * softirq checks work in the hardirq context.
-			 */
-			irqtp->preempt_count =
-				(irqtp->preempt_count & ~SOFTIRQ_MASK) |
-				(curtp->preempt_count & SOFTIRQ_MASK);
+	irq_enter();
 
-			current->thread.ksp_limit = (unsigned long)irqtp +
-				_ALIGN_UP(sizeof(struct thread_info), 16);
-			call_handle_irq(irq, desc, irqtp, handler);
-			current->thread.ksp_limit = saved_sp_limit;
-			irqtp->task = NULL;
+	check_stack_overflow();
 
+	irq = ppc_md.get_irq();
 
-			/* Set any flag that may have been set on the
-			 * alternate stack
-			 */
-			if (irqtp->flags)
-				set_bits(irqtp->flags, &curtp->flags);
-		} else
-#endif
-			generic_handle_irq(irq);
-	} else if (irq != NO_IRQ_IGNORE)
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE)
+		handle_one_irq(irq);
+	else if (irq != NO_IRQ_IGNORE)
 		/* That's not SMP safe ... but who cares ? */
 		ppc_spurious_interrupts++;
 
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 78b3f7840ad..2419cc706ff 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -169,6 +169,9 @@ struct hvcall_ppp_data {
 	u8	unallocated_weight;
 	u16	active_procs_in_pool;
 	u16	active_system_procs;
+	u16	phys_platform_procs;
+	u32	max_proc_cap_avail;
+	u32	entitled_proc_cap_avail;
 };
 
 /*
@@ -190,13 +193,18 @@ struct hvcall_ppp_data {
  *            XX - Unallocated Variable Processor Capacity Weight.
  *              XXXX - Active processors in Physical Processor Pool.
  *                  XXXX  - Processors active on platform.
+ *  R8 (QQQQRRRRRRSSSSSS). if ibm,partition-performance-parameters-level >= 1
+ *	XXXX - Physical platform procs allocated to virtualization.
+ *	    XXXXXX - Max procs capacity % available to the partitions pool.
+ *	          XXXXXX - Entitled procs capacity % available to the
+ *			   partitions pool.
  */
 static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 {
 	unsigned long rc;
-	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
 
-	rc = plpar_hcall(H_GET_PPP, retbuf);
+	rc = plpar_hcall9(H_GET_PPP, retbuf);
 
 	ppp_data->entitlement = retbuf[0];
 	ppp_data->unallocated_entitlement = retbuf[1];
@@ -210,6 +218,10 @@ static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 	ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
 	ppp_data->active_system_procs = retbuf[3] & 0xffff;
 
+	ppp_data->phys_platform_procs = retbuf[4] >> 6 * 8;
+	ppp_data->max_proc_cap_avail = (retbuf[4] >> 3 * 8) & 0xffffff;
+	ppp_data->entitled_proc_cap_avail = retbuf[4] & 0xffffff;
+
 	return rc;
 }
 
@@ -234,6 +246,8 @@ static unsigned h_pic(unsigned long *pool_idle_time,
 static void parse_ppp_data(struct seq_file *m)
 {
 	struct hvcall_ppp_data ppp_data;
+	struct device_node *root;
+	const int *perf_level;
 	int rc;
 
 	rc = h_get_ppp(&ppp_data);
@@ -267,6 +281,28 @@ static void parse_ppp_data(struct seq_file *m)
 	seq_printf(m, "capped=%d\n", ppp_data.capped);
 	seq_printf(m, "unallocated_capacity=%lld\n",
 		   ppp_data.unallocated_entitlement);
+
+	/* The last bits of information returned from h_get_ppp are only
+	 * valid if the ibm,partition-performance-parameters-level
+	 * property is >= 1.
+	 */
+	root = of_find_node_by_path("/");
+	if (root) {
+		perf_level = of_get_property(root,
+				"ibm,partition-performance-parameters-level",
+					     NULL);
+		if (perf_level && (*perf_level >= 1)) {
+			seq_printf(m,
+			    "physical_procs_allocated_to_virtualization=%d\n",
+				   ppp_data.phys_platform_procs);
+			seq_printf(m, "max_proc_capacity_available=%d\n",
+				   ppp_data.max_proc_cap_avail);
+			seq_printf(m, "entitled_proc_capacity_available=%d\n",
+				   ppp_data.entitled_proc_cap_avail);
+		}
+
+		of_node_put(root);
+	}
 }
 
 /**
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index b9530b2395a..a5cf9c1356a 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -457,98 +457,6 @@ _GLOBAL(disable_kernel_fp)
 	isync
 	blr
 
-#ifdef CONFIG_ALTIVEC
-
-#if 0 /* this has no callers for now */
-/*
- * disable_kernel_altivec()
- * Disable the VMX.
- */
-_GLOBAL(disable_kernel_altivec)
-	mfmsr	r3
-	rldicl	r0,r3,(63-MSR_VEC_LG),1
-	rldicl	r3,r0,(MSR_VEC_LG+1),0
-	mtmsrd	r3			/* disable use of VMX now */
-	isync
-	blr
-#endif /* 0 */
-
-/*
- * giveup_altivec(tsk)
- * Disable VMX for the task given as the argument,
- * and save the vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- */
-_GLOBAL(giveup_altivec)
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	mtmsrd	r5			/* enable use of VMX now */
-	isync
-	cmpdi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	ld	r5,PT_REGS(r3)
-	cmpdi	0,r5,0
-	SAVE_32VRS(0,r4,r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	lis	r3,(MSR_VEC|MSR_VSX)@h
-FTR_SECTION_ELSE
-	lis	r3,MSR_VEC@h
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
-#else
-	lis	r3,MSR_VEC@h
-#endif
-	andc	r4,r4,r3		/* disable FP for previous task */
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_altivec@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
-	blr
-
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_VSX
-/*
- * __giveup_vsx(tsk)
- * Disable VSX for the task given as the argument.
- * Does NOT save vsx registers.
- * Enables the VSX for use in the kernel on return.
- */
-_GLOBAL(__giveup_vsx)
-	mfmsr	r5
-	oris	r5,r5,MSR_VSX@h
-	mtmsrd	r5			/* enable use of VSX now */
-	isync
-
-	cmpdi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	ld	r5,PT_REGS(r3)
-	cmpdi	0,r5,0
-	beq	1f
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VSX@h
-	andc	r4,r4,r3		/* disable VSX for previous task */
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_vsx@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
-	blr
-
-#endif /* CONFIG_VSX */
-
 /* kexec_wait(phys_cpu)
  *
  * wait for the flag to change, indicating this kernel is going away but
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index c744b327bca..e9962c7f8a0 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -18,6 +18,8 @@
  * field correctly */
 extern unsigned long __toc_start;
 
+#ifdef CONFIG_PPC_BOOK3S
+
 /*
  * The structure which the hypervisor knows about - this structure
  * should not cross a page boundary.  The vpa_init/register_vpa call
@@ -41,6 +43,10 @@ struct lppaca lppaca[] = {
 	},
 };
 
+#endif /* CONFIG_PPC_BOOK3S */
+
+#ifdef CONFIG_PPC_STD_MMU_64
+
 /*
  * 3 persistent SLBs are registered here.  The buffer will be zero
  * initially, hence will all be invaild until we actually write them.
@@ -52,6 +58,8 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
 	},
 };
 
+#endif /* CONFIG_PPC_STD_MMU_64 */
+
 /* The Paca is an array with one entry per processor.  Each contains an
  * lppaca, which contains the information shared between the
  * hypervisor and Linux.
@@ -77,15 +85,19 @@ void __init initialise_pacas(void)
 	for (cpu = 0; cpu < NR_CPUS; cpu++) {
 		struct paca_struct *new_paca = &paca[cpu];
 
+#ifdef CONFIG_PPC_BOOK3S
 		new_paca->lppaca_ptr = &lppaca[cpu];
+#endif
 		new_paca->lock_token = 0x8000;
 		new_paca->paca_index = cpu;
 		new_paca->kernel_toc = kernel_toc;
 		new_paca->kernelbase = (unsigned long) _stext;
 		new_paca->kernel_msr = MSR_KERNEL;
 		new_paca->hw_cpu_id = 0xffff;
-		new_paca->slb_shadow_ptr = &slb_shadow[cpu];
 		new_paca->__current = &init_task;
+#ifdef CONFIG_PPC_STD_MMU_64
+		new_paca->slb_shadow_ptr = &slb_shadow[cpu];
+#endif /* CONFIG_PPC_STD_MMU_64 */
 
 	}
 }
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 4fee63cb53f..5a56e97c5ac 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1505,7 +1505,7 @@ void __init pcibios_resource_survey(void)
  * rest of the code later, for now, keep it as-is as our main
  * resource allocation function doesn't deal with sub-trees yet.
  */
-void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
+void pcibios_claim_one_bus(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 	struct pci_bus *child_bus;
@@ -1533,7 +1533,6 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
 	list_for_each_entry(child_bus, &bus->children, node)
 		pcibios_claim_one_bus(child_bus);
 }
-EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
 
 
 /* pcibios_finish_adding_to_bus
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index d473634e39e..3ae1c666ff9 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -33,7 +33,6 @@ int pcibios_assign_bus_offset = 1;
 
 void pcibios_make_OF_bus_map(void);
 
-static void fixup_broken_pcnet32(struct pci_dev* dev);
 static void fixup_cpc710_pci64(struct pci_dev* dev);
 #ifdef CONFIG_PPC_OF
 static u8* pci_to_OF_bus_map;
@@ -72,16 +71,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_res
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); 
 
 static void
-fixup_broken_pcnet32(struct pci_dev* dev)
-{
-	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
-		dev->vendor = PCI_VENDOR_ID_AMD;
-		pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT,	PCI_ANY_ID,			fixup_broken_pcnet32);
-
-static void
 fixup_cpc710_pci64(struct pci_dev* dev)
 {
 	/* Hide the PCI64 BARs from the kernel as their content doesn't
@@ -447,14 +436,6 @@ static int __init pcibios_init(void)
 
 subsys_initcall(pcibios_init);
 
-/* the next one is stolen from the alpha port... */
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-	/* XXX FIXME - update OF device tree node interrupt property */
-}
-
 static struct pci_controller*
 pci_bus_to_hose(int bus)
 {
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 96edb6f8bab..9e8902fa14c 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,16 +43,6 @@ unsigned long pci_probe_only = 1;
 unsigned long pci_io_base = ISA_IO_BASE;
 EXPORT_SYMBOL(pci_io_base);
 
-static void fixup_broken_pcnet32(struct pci_dev* dev)
-{
-	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
-		dev->vendor = PCI_VENDOR_ID_AMD;
-		pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
-
-
 static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 {
 	const u32 *prop;
@@ -430,6 +420,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 	 * so flushing the hash table is the only sane way to make sure
 	 * that no hash entries are covering that removed bridge area
 	 * while still allowing other busses overlapping those pages
+	 *
+	 * Note: If we ever support P2P hotplug on Book3E, we'll have
+	 * to do an appropriate TLB flush here too
 	 */
 	if (bus->self) {
 		struct resource *res = bus->resource[0];
@@ -437,8 +430,10 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 		pr_debug("IO unmapping for PCI-PCI bridge %s\n",
 			 pci_name(bus->self));
 
+#ifdef CONFIG_PPC_STD_MMU_64
 		__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
 					 res->end + _IO_BASE + 1);
+#endif
 		return 0;
 	}
 
@@ -511,7 +506,7 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
 	pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
 	pr_debug("  phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
 		 hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
-	pr_debug("  size=0x%016lx (alloc=0x%016lx)\n",
+	pr_debug("  size=0x%016llx (alloc=0x%016lx)\n",
 		 hose->pci_io_size, size_page);
 
 	/* Establish the mapping */
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 1c67de52e3c..d5e36e5dc7c 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -27,7 +27,6 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
-#include <asm/pSeries_reconfig.h>
 #include <asm/ppc-pci.h>
 #include <asm/firmware.h>
 
@@ -35,7 +34,7 @@
  * Traverse_func that inits the PCI fields of the device node.
  * NOTE: this *must* be done before read/write config to the device.
  */
-static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
+void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 {
 	struct pci_controller *phb = data;
 	const int *type =
@@ -184,29 +183,6 @@ struct device_node *fetch_dev_dn(struct pci_dev *dev)
 }
 EXPORT_SYMBOL(fetch_dev_dn);
 
-static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
-	struct device_node *np = node;
-	struct pci_dn *pci = NULL;
-	int err = NOTIFY_OK;
-
-	switch (action) {
-	case PSERIES_RECONFIG_ADD:
-		pci = np->parent->data;
-		if (pci)
-			update_dn_pci_info(np, pci->phb);
-		break;
-	default:
-		err = NOTIFY_DONE;
-		break;
-	}
-	return err;
-}
-
-static struct notifier_block pci_dn_reconfig_nb = {
-	.notifier_call = pci_dn_reconfig_notifier,
-};
-
 /** 
  * pci_devs_phb_init - Initialize phbs and pci devs under them.
  * 
@@ -223,6 +199,4 @@ void __init pci_devs_phb_init(void)
 	/* This must be done first so the device nodes have valid pci info! */
 	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
 		pci_devs_phb_init_dynamic(phb);
-
-	pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
 }
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7b44a33f03c..3e7135bbe40 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -650,7 +650,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	p->thread.ksp_limit = (unsigned long)task_stack_page(p) +
 				_ALIGN_UP(sizeof(struct thread_info), 16);
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
 	if (cpu_has_feature(CPU_FTR_SLB)) {
 		unsigned long sp_vsid;
 		unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index ce01ff2474d..d4405b95bfa 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -585,7 +585,7 @@ static void __init check_cpu_pa_features(unsigned long node)
 		      ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
 }
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
 static void __init check_cpu_slb_size(unsigned long node)
 {
 	u32 *slb_size_ptr;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 2f0e64b5364..ef6f64950e9 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -44,10 +44,7 @@
 #include <asm/sections.h>
 #include <asm/machdep.h>
 
-#ifdef CONFIG_LOGO_LINUX_CLUT224
 #include <linux/linux_logo.h>
-extern const struct linux_logo logo_linux_clut224;
-#endif
 
 /*
  * Properties whose value is longer than this get excluded from our
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 3635be61f89..9fa2c7dcd05 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -704,15 +704,34 @@ void user_enable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+		task->thread.dbcr0 &= ~DBCR0_BT;
 		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
 #else
+		regs->msr &= ~MSR_BE;
 		regs->msr |= MSR_SE;
 #endif
 	}
 	set_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
+void user_enable_block_step(struct task_struct *task)
+{
+	struct pt_regs *regs = task->thread.regs;
+
+	if (regs != NULL) {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+		task->thread.dbcr0 &= ~DBCR0_IC;
+		task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT;
+		regs->msr |= MSR_DE;
+#else
+		regs->msr &= ~MSR_SE;
+		regs->msr |= MSR_BE;
+#endif
+	}
+	set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
 void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
@@ -726,10 +745,10 @@ void user_disable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
+		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
-		regs->msr &= ~MSR_SE;
+		regs->msr &= ~(MSR_SE | MSR_BE);
 #endif
 	}
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 8869001ab5d..54e66da8f74 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -93,10 +93,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 {
 	struct device_node *busdn, *dn;
 
-	if (bus->self)
-		busdn = pci_device_to_OF_node(bus->self);
-	else
-		busdn = bus->sysdata;	/* must be a phb */
+	busdn = pci_bus_to_OF_node(bus);
 
 	/* Search only direct children of the bus */
 	for (dn = busdn->child; dn; dn = dn->sibling) {
@@ -140,10 +137,7 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 {
 	struct device_node *busdn, *dn;
 
-	if (bus->self)
-		busdn = pci_device_to_OF_node(bus->self);
-	else
-		busdn = bus->sysdata;	/* must be a phb */
+	busdn = pci_bus_to_OF_node(bus);
 
 	/* Search only direct children of the bus */
 	for (dn = busdn->child; dn; dn = dn->sibling) {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 9e1ca745d8f..1d154248cf4 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -39,6 +39,7 @@
 #include <asm/serial.h>
 #include <asm/udbg.h>
 #include <asm/mmu_context.h>
+#include <asm/swiotlb.h>
 
 #include "setup.h"
 
@@ -332,6 +333,11 @@ void __init setup_arch(char **cmdline_p)
 		ppc_md.setup_arch();
 	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 
+#ifdef CONFIG_SWIOTLB
+	if (ppc_swiotlb_enable)
+		swiotlb_init();
+#endif
+
 	paging_init();
 
 	/* Initialize the MMU context management stuff */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index c410c606955..1f6816003eb 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -61,6 +61,7 @@
 #include <asm/xmon.h>
 #include <asm/udbg.h>
 #include <asm/kexec.h>
+#include <asm/swiotlb.h>
 
 #include "setup.h"
 
@@ -417,12 +418,14 @@ void __init setup_system(void)
 	if (ppc64_caches.iline_size != 0x80)
 		printk("ppc64_caches.icache_line_size = 0x%x\n",
 		       ppc64_caches.iline_size);
+#ifdef CONFIG_PPC_STD_MMU_64
 	if (htab_address)
 		printk("htab_address                  = 0x%p\n", htab_address);
 	printk("htab_hash_mask                = 0x%lx\n", htab_hash_mask);
+#endif /* CONFIG_PPC_STD_MMU_64 */
 	if (PHYSICAL_START > 0)
-		printk("physical_start                = 0x%lx\n",
-		       PHYSICAL_START);
+		printk("physical_start                = 0x%llx\n",
+		       (unsigned long long)PHYSICAL_START);
 	printk("-----------------------------------------------------\n");
 
 	DBG(" <- setup_system()\n");
@@ -511,8 +514,9 @@ void __init setup_arch(char **cmdline_p)
 	irqstack_early_init();
 	emergency_stack_init();
 
+#ifdef CONFIG_PPC_STD_MMU_64
 	stabs_alloc();
-
+#endif
 	/* set up the bootmem stuff with available memory */
 	do_init_bootmem();
 	sparse_init();
@@ -524,6 +528,11 @@ void __init setup_arch(char **cmdline_p)
 	if (ppc_md.setup_arch)
 		ppc_md.setup_arch();
 
+#ifdef CONFIG_SWIOTLB
+	if (ppc_swiotlb_enable)
+		swiotlb_init();
+#endif
+
 	paging_init();
 	ppc64_boot_msg(0x15, "Setup Done");
 }
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 48571ac56fb..15391c2ab01 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -52,6 +52,7 @@
 #include <linux/jiffies.h>
 #include <linux/posix-timers.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -109,7 +110,7 @@ static void decrementer_set_mode(enum clock_event_mode mode,
 static struct clock_event_device decrementer_clockevent = {
        .name           = "decrementer",
        .rating         = 200,
-       .shift          = 16,
+       .shift          = 0,	/* To be filled in */
        .mult           = 0,	/* To be filled in */
        .irq            = 0,
        .set_next_event = decrementer_set_next_event,
@@ -843,6 +844,22 @@ static void decrementer_set_mode(enum clock_event_mode mode,
 		decrementer_set_next_event(DECREMENTER_MAX, dev);
 }
 
+static void __init setup_clockevent_multiplier(unsigned long hz)
+{
+	u64 mult, shift = 32;
+
+	while (1) {
+		mult = div_sc(hz, NSEC_PER_SEC, shift);
+		if (mult && (mult >> 32UL) == 0UL)
+			break;
+
+		shift--;
+	}
+
+	decrementer_clockevent.shift = shift;
+	decrementer_clockevent.mult = mult;
+}
+
 static void register_decrementer_clockevent(int cpu)
 {
 	struct clock_event_device *dec = &per_cpu(decrementers, cpu).event;
@@ -860,8 +877,7 @@ static void __init init_decrementer_clockevent(void)
 {
 	int cpu = smp_processor_id();
 
-	decrementer_clockevent.mult = div_sc(ppc_tb_freq, NSEC_PER_SEC,
-					     decrementer_clockevent.shift);
+	setup_clockevent_multiplier(ppc_tb_freq);
 	decrementer_clockevent.max_delta_ns =
 		clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
 	decrementer_clockevent.min_delta_ns =
@@ -1128,6 +1144,15 @@ void div128_by_32(u64 dividend_high, u64 dividend_low,
 
 }
 
+/* We don't need to calibrate delay, we use the CPU timebase for that */
+void calibrate_delay(void)
+{
+	/* Some generic code (such as spinlock debug) use loops_per_jiffy
+	 * as the number of __delay(1) in a jiffy, so make it so
+	 */
+	loops_per_jiffy = tb_ticks_per_jiffy;
+}
+
 static int __init rtc_init(void)
 {
 	struct platform_device *pdev;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 678fbff0d20..6f0ae1a9bfa 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -33,7 +33,9 @@
 #include <linux/backlight.h>
 #include <linux/bug.h>
 #include <linux/kdebug.h>
+#include <linux/debugfs.h>
 
+#include <asm/emulated_ops.h>
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -757,36 +759,44 @@ static int emulate_instruction(struct pt_regs *regs)
 
 	/* Emulate the mfspr rD, PVR. */
 	if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) {
+		PPC_WARN_EMULATED(mfpvr);
 		rd = (instword >> 21) & 0x1f;
 		regs->gpr[rd] = mfspr(SPRN_PVR);
 		return 0;
 	}
 
 	/* Emulating the dcba insn is just a no-op.  */
-	if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA)
+	if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) {
+		PPC_WARN_EMULATED(dcba);
 		return 0;
+	}
 
 	/* Emulate the mcrxr insn.  */
 	if ((instword & PPC_INST_MCRXR_MASK) == PPC_INST_MCRXR) {
 		int shift = (instword >> 21) & 0x1c;
 		unsigned long msk = 0xf0000000UL >> shift;
 
+		PPC_WARN_EMULATED(mcrxr);
 		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
 		regs->xer &= ~0xf0000000UL;
 		return 0;
 	}
 
 	/* Emulate load/store string insn. */
-	if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING)
+	if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) {
+		PPC_WARN_EMULATED(string);
 		return emulate_string_inst(regs, instword);
+	}
 
 	/* Emulate the popcntb (Population Count Bytes) instruction. */
 	if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) {
+		PPC_WARN_EMULATED(popcntb);
 		return emulate_popcntb_inst(regs, instword);
 	}
 
 	/* Emulate isel (Integer Select) instruction */
 	if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) {
+		PPC_WARN_EMULATED(isel);
 		return emulate_isel(regs, instword);
 	}
 
@@ -984,6 +994,8 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 #ifdef CONFIG_MATH_EMULATION
 	errcode = do_mathemu(regs);
+	if (errcode >= 0)
+		PPC_WARN_EMULATED(math);
 
 	switch (errcode) {
 	case 0:
@@ -1005,6 +1017,9 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 #elif defined(CONFIG_8XX_MINIMAL_FPEMU)
 	errcode = Soft_emulate_8xx(regs);
+	if (errcode >= 0)
+		PPC_WARN_EMULATED(8xx);
+
 	switch (errcode) {
 	case 0:
 		emulate_single_step(regs);
@@ -1026,7 +1041,34 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
-	if (debug_status & DBSR_IC) {	/* instruction completion */
+	/* Hack alert: On BookE, Branch Taken stops on the branch itself, while
+	 * on server, it stops on the target of the branch. In order to simulate
+	 * the server behaviour, we thus restart right away with a single step
+	 * instead of stopping here when hitting a BT
+	 */
+	if (debug_status & DBSR_BT) {
+		regs->msr &= ~MSR_DE;
+
+		/* Disable BT */
+		mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_BT);
+		/* Clear the BT event */
+		mtspr(SPRN_DBSR, DBSR_BT);
+
+		/* Do the single step trick only when coming from userspace */
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~DBCR0_BT;
+			current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
+			regs->msr |= MSR_DE;
+			return;
+		}
+
+		if (notify_die(DIE_SSTEP, "block_step", regs, 5,
+			       5, SIGTRAP) == NOTIFY_STOP) {
+			return;
+		}
+		if (debugger_sstep(regs))
+			return;
+	} else if (debug_status & DBSR_IC) { 	/* Instruction complete */
 		regs->msr &= ~MSR_DE;
 
 		/* Disable instruction completion */
@@ -1042,9 +1084,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 		if (debugger_sstep(regs))
 			return;
 
-		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_IC;
-		}
+		if (user_mode(regs))
+			current->thread.dbcr0 &= ~(DBCR0_IC);
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
 	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
@@ -1088,6 +1129,7 @@ void altivec_assist_exception(struct pt_regs *regs)
 
 	flush_altivec_to_thread(current);
 
+	PPC_WARN_EMULATED(altivec);
 	err = emulate_altivec(regs);
 	if (err == 0) {
 		regs->nip += 4;		/* skip emulated instruction */
@@ -1286,3 +1328,79 @@ void kernel_bad_stack(struct pt_regs *regs)
 void __init trap_init(void)
 {
 }
+
+
+#ifdef CONFIG_PPC_EMULATED_STATS
+
+#define WARN_EMULATED_SETUP(type)	.type = { .name = #type }
+
+struct ppc_emulated ppc_emulated = {
+#ifdef CONFIG_ALTIVEC
+	WARN_EMULATED_SETUP(altivec),
+#endif
+	WARN_EMULATED_SETUP(dcba),
+	WARN_EMULATED_SETUP(dcbz),
+	WARN_EMULATED_SETUP(fp_pair),
+	WARN_EMULATED_SETUP(isel),
+	WARN_EMULATED_SETUP(mcrxr),
+	WARN_EMULATED_SETUP(mfpvr),
+	WARN_EMULATED_SETUP(multiple),
+	WARN_EMULATED_SETUP(popcntb),
+	WARN_EMULATED_SETUP(spe),
+	WARN_EMULATED_SETUP(string),
+	WARN_EMULATED_SETUP(unaligned),
+#ifdef CONFIG_MATH_EMULATION
+	WARN_EMULATED_SETUP(math),
+#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
+	WARN_EMULATED_SETUP(8xx),
+#endif
+#ifdef CONFIG_VSX
+	WARN_EMULATED_SETUP(vsx),
+#endif
+};
+
+u32 ppc_warn_emulated;
+
+void ppc_warn_emulated_print(const char *type)
+{
+	if (printk_ratelimit())
+		pr_warning("%s used emulated %s instruction\n", current->comm,
+			   type);
+}
+
+static int __init ppc_warn_emulated_init(void)
+{
+	struct dentry *dir, *d;
+	unsigned int i;
+	struct ppc_emulated_entry *entries = (void *)&ppc_emulated;
+
+	if (!powerpc_debugfs_root)
+		return -ENODEV;
+
+	dir = debugfs_create_dir("emulated_instructions",
+				 powerpc_debugfs_root);
+	if (!dir)
+		return -ENOMEM;
+
+	d = debugfs_create_u32("do_warn", S_IRUGO | S_IWUSR, dir,
+			       &ppc_warn_emulated);
+	if (!d)
+		goto fail;
+
+	for (i = 0; i < sizeof(ppc_emulated)/sizeof(*entries); i++) {
+		d = debugfs_create_u32(entries[i].name, S_IRUGO | S_IWUSR, dir,
+				       (u32 *)&entries[i].val.counter);
+		if (!d)
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	debugfs_remove_recursive(dir);
+	return -ENOMEM;
+}
+
+device_initcall(ppc_warn_emulated_init);
+
+#endif /* CONFIG_PPC_EMULATED_STATS */
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 49ac3d6e139..ef36cbbc588 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -1,5 +1,215 @@
+#include <asm/processor.h>
 #include <asm/ppc_asm.h>
 #include <asm/reg.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+/*
+ * load_up_altivec(unused, unused, tsk)
+ * Disable VMX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ * On SMP we know the VMX is free, since we give it up every
+ * switch (ie, no lazy save of the vector registers).
+ */
+_GLOBAL(load_up_altivec)
+	mfmsr	r5			/* grab the current MSR */
+	oris	r5,r5,MSR_VEC@h
+	MTMSRD(r5)			/* enable use of AltiVec now */
+	isync
+
+/*
+ * For SMP, we don't do lazy VMX switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another.  Instead we call giveup_altvec in switch_to.
+ * VRSAVE isn't dealt with here, that is done in the normal context
+ * switch code. Note that we could rely on vrsave value to eventually
+ * avoid saving all of the VREGs here...
+ */
+#ifndef CONFIG_SMP
+	LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
+	toreal(r3)
+	PPC_LL	r4,ADDROFF(last_task_used_altivec)(r3)
+	PPC_LCMPI	0,r4,0
+	beq	1f
+
+	/* Save VMX state to last_task_used_altivec's THREAD struct */
+	toreal(r4)
+	addi	r4,r4,THREAD
+	SAVE_32VRS(0,r5,r4)
+	mfvscr	vr0
+	li	r10,THREAD_VSCR
+	stvx	vr0,r10,r4
+	/* Disable VMX for last_task_used_altivec */
+	PPC_LL	r5,PT_REGS(r4)
+	toreal(r5)
+	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r10,MSR_VEC@h
+	andc	r4,r4,r10
+	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+
+	/* Hack: if we get an altivec unavailable trap with VRSAVE
+	 * set to all zeros, we assume this is a broken application
+	 * that fails to set it properly, and thus we switch it to
+	 * all 1's
+	 */
+	mfspr	r4,SPRN_VRSAVE
+	cmpdi	0,r4,0
+	bne+	1f
+	li	r4,-1
+	mtspr	SPRN_VRSAVE,r4
+1:
+	/* enable use of VMX after return */
+#ifdef CONFIG_PPC32
+	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	oris	r9,r9,MSR_VEC@h
+#else
+	ld	r4,PACACURRENT(r13)
+	addi	r5,r4,THREAD		/* Get THREAD */
+	oris	r12,r12,MSR_VEC@h
+	std	r12,_MSR(r1)
+#endif
+	li	r4,1
+	li	r10,THREAD_VSCR
+	stw	r4,THREAD_USED_VR(r5)
+	lvx	vr0,r10,r5
+	mtvscr	vr0
+	REST_32VRS(0,r4,r5)
+#ifndef CONFIG_SMP
+	/* Update last_task_used_math to 'current' */
+	subi	r4,r5,THREAD		/* Back to 'current' */
+	fromreal(r4)
+	PPC_STL	r4,ADDROFF(last_task_used_math)(r3)
+#endif /* CONFIG_SMP */
+	/* restore registers and return */
+	blr
+
+/*
+ * giveup_altivec(tsk)
+ * Disable VMX for the task given as the argument,
+ * and save the vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ */
+_GLOBAL(giveup_altivec)
+	mfmsr	r5
+	oris	r5,r5,MSR_VEC@h
+	SYNC
+	MTMSRD(r5)			/* enable use of VMX now */
+	isync
+	PPC_LCMPI	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	PPC_LL	r5,PT_REGS(r3)
+	PPC_LCMPI	0,r5,0
+	SAVE_32VRS(0,r4,r3)
+	mfvscr	vr0
+	li	r4,THREAD_VSCR
+	stvx	vr0,r4,r3
+	beq	1f
+	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	lis	r3,(MSR_VEC|MSR_VSX)@h
+FTR_SECTION_ELSE
+	lis	r3,MSR_VEC@h
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
+#else
+	lis	r3,MSR_VEC@h
+#endif
+	andc	r4,r4,r3		/* disable FP for previous task */
+	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
+	PPC_STL	r5,ADDROFF(last_task_used_altivec)(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+#ifdef CONFIG_VSX
+
+#ifdef CONFIG_PPC32
+#error This asm code isn't ready for 32-bit kernels
+#endif
+
+/*
+ * load_up_vsx(unused, unused, tsk)
+ * Disable VSX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Reuse the fp and vsx saves, but first check to see if they have
+ * been saved already.
+ */
+_GLOBAL(load_up_vsx)
+/* Load FP and VSX registers if they haven't been done yet */
+	andi.	r5,r12,MSR_FP
+	beql+	load_up_fpu		/* skip if already loaded */
+	andis.	r5,r12,MSR_VEC@h
+	beql+	load_up_altivec		/* skip if already loaded */
+
+#ifndef CONFIG_SMP
+	ld	r3,last_task_used_vsx@got(r2)
+	ld	r4,0(r3)
+	cmpdi	0,r4,0
+	beq	1f
+	/* Disable VSX for last_task_used_vsx */
+	addi	r4,r4,THREAD
+	ld	r5,PT_REGS(r4)
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r6,MSR_VSX@h
+	andc	r6,r4,r6
+	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	ld	r4,PACACURRENT(r13)
+	addi	r4,r4,THREAD		/* Get THREAD */
+	li	r6,1
+	stw	r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
+	/* enable use of VSX after return */
+	oris	r12,r12,MSR_VSX@h
+	std	r12,_MSR(r1)
+#ifndef CONFIG_SMP
+	/* Update last_task_used_math to 'current' */
+	ld	r4,PACACURRENT(r13)
+	std	r4,0(r3)
+#endif /* CONFIG_SMP */
+	b	fast_exception_return
+
+/*
+ * __giveup_vsx(tsk)
+ * Disable VSX for the task given as the argument.
+ * Does NOT save vsx registers.
+ * Enables the VSX for use in the kernel on return.
+ */
+_GLOBAL(__giveup_vsx)
+	mfmsr	r5
+	oris	r5,r5,MSR_VSX@h
+	mtmsrd	r5			/* enable use of VSX now */
+	isync
+
+	cmpdi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	ld	r5,PT_REGS(r3)
+	cmpdi	0,r5,0
+	beq	1f
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_VSX@h
+	andc	r4,r4,r3		/* disable VSX for previous task */
+	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	ld	r4,last_task_used_vsx@got(r2)
+	std	r5,0(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+#endif /* CONFIG_VSX */
+
 
 /*
  * The routines below are in assembler so we can closely control the
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index b746f4ca420..c4bcf072cb3 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -11,10 +11,11 @@ obj-y				:= fault.o mem.o pgtable.o gup.o \
 				   pgtable_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC_MMU_NOHASH)	+= mmu_context_nohash.o tlb_nohash.o \
 				   tlb_nohash_low.o
-hash-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
-obj-$(CONFIG_PPC64)		+= hash_utils_64.o \
+obj-$(CONFIG_PPC64)		+= mmap_64.o
+hash64-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
+obj-$(CONFIG_PPC_STD_MMU_64)	+= hash_utils_64.o \
 				   slb_low.o slb.o stab.o \
-				   mmap_64.o $(hash-y)
+				   mmap_64.o $(hash64-y)
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
 				   tlb_hash$(CONFIG_WORD_SIZE).o \
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 34e5c0b219b..056d23a1b10 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -27,6 +27,7 @@
 #include <asm/cputable.h>
 #include <asm/udbg.h>
 #include <asm/kexec.h>
+#include <asm/ppc-opcode.h>
 
 #ifdef DEBUG_LOW
 #define DBG_LOW(fmt...) udbg_printf(fmt)
@@ -49,14 +50,21 @@ static inline void __tlbie(unsigned long va, int psize, int ssize)
 	case MMU_PAGE_4K:
 		va &= ~0xffful;
 		va |= ssize << 8;
-		asm volatile("tlbie %0,0" : : "r" (va) : "memory");
+		asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0),
+					       %2)
+			     : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+			     : "memory");
 		break;
 	default:
 		penc = mmu_psize_defs[psize].penc;
 		va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
 		va |= penc << 12;
 		va |= ssize << 8;
-		asm volatile("tlbie %0,1" : : "r" (va) : "memory");
+		va |= 1; /* L */
+		asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0),
+					       %2)
+			     : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+			     : "memory");
 		break;
 	}
 }
@@ -80,6 +88,7 @@ static inline void __tlbiel(unsigned long va, int psize, int ssize)
 		va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
 		va |= penc << 12;
 		va |= ssize << 8;
+		va |= 1; /* L */
 		asm volatile(".long 0x7c000224 | (%0 << 11) | (1 << 21)"
 			     : : "r"(va) : "memory");
 		break;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 3e6a6543f53..68a821add28 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -66,6 +66,7 @@
 
 #include "mmu_decl.h"
 
+#ifdef CONFIG_PPC_STD_MMU_64
 #if PGTABLE_RANGE > USER_VSID_RANGE
 #warning Limited user VSID range means pagetable space is wasted
 #endif
@@ -73,6 +74,7 @@
 #if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
 #warning TASK_SIZE is smaller than it needs to be.
 #endif
+#endif /* CONFIG_PPC_STD_MMU_64 */
 
 phys_addr_t memstart_addr = ~0;
 phys_addr_t kernstart_addr;
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 030d0005b4d..8343986809c 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -46,7 +46,7 @@ static unsigned int next_context, nr_free_contexts;
 static unsigned long *context_map;
 static unsigned long *stale_map[NR_CPUS];
 static struct mm_struct **context_mm;
-static spinlock_t context_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(context_lock);
 
 #define CTX_MAP_SIZE	\
 	(sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1))
@@ -73,7 +73,6 @@ static unsigned int steal_context_smp(unsigned int id)
 	struct mm_struct *mm;
 	unsigned int cpu, max;
 
- again:
 	max = last_context - first_context;
 
 	/* Attempt to free next_context first and then loop until we manage */
@@ -108,7 +107,9 @@ static unsigned int steal_context_smp(unsigned int id)
 	spin_unlock(&context_lock);
 	cpu_relax();
 	spin_lock(&context_lock);
-	goto again;
+
+	/* This will cause the caller to try again */
+	return MMU_NO_CONTEXT;
 }
 #endif  /* CONFIG_SMP */
 
@@ -194,6 +195,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 		WARN_ON(prev->context.active < 1);
 		prev->context.active--;
 	}
+
+ again:
 #endif /* CONFIG_SMP */
 
 	/* If we already have a valid assigned context, skip all that */
@@ -212,7 +215,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 #ifdef CONFIG_SMP
 		if (num_online_cpus() > 1) {
 			id = steal_context_smp(id);
-			goto stolen;
+			if (id == MMU_NO_CONTEXT)
+				goto again;
 		}
 #endif /* CONFIG_SMP */
 		id = steal_context_up(id);
@@ -272,6 +276,7 @@ int init_new_context(struct task_struct *t, struct mm_struct *mm)
  */
 void destroy_context(struct mm_struct *mm)
 {
+	unsigned long flags;
 	unsigned int id;
 
 	if (mm->context.id == MMU_NO_CONTEXT)
@@ -279,18 +284,18 @@ void destroy_context(struct mm_struct *mm)
 
 	WARN_ON(mm->context.active != 0);
 
-	spin_lock(&context_lock);
+	spin_lock_irqsave(&context_lock, flags);
 	id = mm->context.id;
 	if (id != MMU_NO_CONTEXT) {
 		__clear_bit(id, context_map);
 		mm->context.id = MMU_NO_CONTEXT;
 #ifdef DEBUG_MAP_CONSISTENCY
 		mm->context.active = 0;
-		context_mm[id] = NULL;
 #endif
+		context_mm[id] = NULL;
 		nr_free_contexts++;
 	}
-	spin_unlock(&context_lock);
+	spin_unlock_irqrestore(&context_lock, flags);
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 9047145095a..b037d95eead 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -981,6 +981,8 @@ void __init do_init_bootmem(void)
 		mark_reserved_regions_for_nid(nid);
 		sparse_memory_present_with_active_regions(nid);
 	}
+
+	init_bootmem_done = 1;
 }
 
 void __init paging_init(void)
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 89497fb0428..3b52c80e5e3 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -2,7 +2,7 @@
  * PowerPC64 SLB support.
  *
  * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
- * Based on earlier code writteh by:
+ * Based on earlier code written by:
  * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
  *    Copyright (c) 2001 Dave Engebretsen
  * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
index 91596f6ba1f..62312abffa2 100644
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ b/arch/powerpc/oprofile/op_model_fsl_emb.c
@@ -228,20 +228,6 @@ static void pmc_stop_ctrs(void)
 	mtpmr(PMRN_PMGC0, pmgc0);
 }
 
-static void dump_pmcs(void)
-{
-	printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0));
-	printk("pmc\t\tpmlca\t\tpmlcb\n");
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0),
-			mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1),
-			mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2),
-			mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3),
-			mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
-}
-
 static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
 {
 	int i;
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index f39c953d535..a6e43cb6f82 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -45,6 +45,7 @@ config KILAUEA
 	depends on 40x
 	default n
 	select 405EX
+	select PPC40x_SIMPLE
 	select PPC4xx_PCI_EXPRESS
 	help
 	  This option enables support for the AMCC PPC405EX evaluation board.
@@ -56,6 +57,7 @@ config MAKALU
 	select 405EX
 	select PCI
 	select PPC4xx_PCI_EXPRESS
+	select PPC40x_SIMPLE
 	help
 	  This option enables support for the AMCC PPC405EX board.
 
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index 9bab76a652a..56e89004c46 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,6 +1,4 @@
-obj-$(CONFIG_KILAUEA)				+= kilauea.o
 obj-$(CONFIG_HCU4)				+= hcu4.o
-obj-$(CONFIG_MAKALU)				+= makalu.o
 obj-$(CONFIG_WALNUT)				+= walnut.o
 obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)	+= virtex.o
 obj-$(CONFIG_EP405)				+= ep405.o
diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c
deleted file mode 100644
index fd7d934dac8..00000000000
--- a/arch/powerpc/platforms/40x/kilauea.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Kilauea board specific routines
- *
- * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Walnut code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id kilauea_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init kilauea_device_probe(void)
-{
-	of_platform_bus_probe(NULL, kilauea_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(kilauea, kilauea_device_probe);
-
-static int __init kilauea_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,kilauea"))
-		return 0;
-
-	ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
-
-	return 1;
-}
-
-define_machine(kilauea) {
-	.name 				= "Kilauea",
-	.probe 				= kilauea_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c
deleted file mode 100644
index a6a1d6017b7..00000000000
--- a/arch/powerpc/platforms/40x/makalu.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Makalu board specific routines
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Walnut code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id makalu_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init makalu_device_probe(void)
-{
-	of_platform_bus_probe(NULL, makalu_of_bus, NULL);
-
-	return 0;
-}
-machine_device_initcall(makalu, makalu_device_probe);
-
-static int __init makalu_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "amcc,makalu"))
-		return 0;
-
-	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-	return 1;
-}
-
-define_machine(makalu) {
-	.name 				= "Makalu",
-	.probe 				= makalu_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc4xx_reset_system,
-	.calibrate_decr			= generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index f40ac9b8f99..5fd5a597400 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -51,7 +51,10 @@ machine_device_initcall(ppc40x_simple, ppc40x_device_probe);
  * board.c file for it rather than adding it to this list.
  */
 static char *board[] __initdata = {
-	"amcc,acadia"
+	"amcc,acadia",
+	"amcc,haleakala",
+	"amcc,kilauea",
+	"amcc,makalu"
 };
 
 static int __init ppc40x_probe(void)
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index fc7fb001276..d0fc6866b00 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -14,6 +14,7 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 #include <asm/xilinx_intc.h>
+#include <asm/xilinx_pci.h>
 #include <asm/ppc4xx.h>
 
 static struct of_device_id xilinx_of_bus_ids[] __initdata = {
@@ -47,6 +48,7 @@ static int __init virtex_probe(void)
 define_machine(virtex) {
 	.name			= "Xilinx Virtex",
 	.probe			= virtex_probe,
+	.setup_arch		= xilinx_pci_init,
 	.init_IRQ		= xilinx_intc_init_tree,
 	.get_irq		= xilinx_intc_get_irq,
 	.restart		= ppc4xx_reset_system,
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 0d83a6a0397..90e3192611a 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -156,7 +156,7 @@ config YOSEMITE
 #	  This option enables support for the IBM PPC440GX evaluation board.
 
 config XILINX_VIRTEX440_GENERIC_BOARD
-	bool "Generic Xilinx Virtex 440 board"
+	bool "Generic Xilinx Virtex 5 FXT board support"
 	depends on 44x
 	default n
 	select XILINX_VIRTEX_5_FXT
@@ -171,6 +171,17 @@ config XILINX_VIRTEX440_GENERIC_BOARD
 	  Most Virtex 5 designs should use this unless it needs to do some
 	  special configuration at board probe time.
 
+config XILINX_ML510
+	bool "Xilinx ML510 extra support"
+	depends on XILINX_VIRTEX440_GENERIC_BOARD
+	select PPC_PCI_CHOICE
+	select XILINX_PCI if PCI
+	select PPC_INDIRECT_PCI if PCI
+	select PPC_I8259 if PCI
+	help
+	  This option enables extra support for features on the Xilinx ML510
+	  board.  The ML510 has a PCI bus with ALI south bridge.
+
 config PPC44x_SIMPLE
 	bool "Simple PowerPC 44x board support"
 	depends on 44x
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 01f51daace1..ee6185aeaa3 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
+obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c
index 68637faf70a..cf96ccaa760 100644
--- a/arch/powerpc/platforms/44x/virtex.c
+++ b/arch/powerpc/platforms/44x/virtex.c
@@ -16,6 +16,7 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 #include <asm/xilinx_intc.h>
+#include <asm/xilinx_pci.h>
 #include <asm/reg.h>
 #include <asm/ppc4xx.h>
 #include "44x.h"
@@ -53,6 +54,7 @@ static int __init virtex_probe(void)
 define_machine(virtex) {
 	.name			= "Xilinx Virtex440",
 	.probe			= virtex_probe,
+	.setup_arch		= xilinx_pci_init,
 	.init_IRQ		= xilinx_intc_init_tree,
 	.get_irq		= xilinx_intc_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c
new file mode 100644
index 00000000000..ba4a6e388a4
--- /dev/null
+++ b/arch/powerpc/platforms/44x/virtex_ml510.c
@@ -0,0 +1,29 @@
+#include <asm/i8259.h>
+#include <linux/pci.h>
+#include "44x.h"
+
+/**
+ * ml510_ail_quirk
+ */
+static void __devinit ml510_ali_quirk(struct pci_dev *dev)
+{
+	/* Enable the IDE controller */
+	pci_write_config_byte(dev, 0x58, 0x4c);
+	/* Assign irq 14 to the primary ide channel */
+	pci_write_config_byte(dev, 0x44, 0x0d);
+	/* Assign irq 15 to the secondary ide channel */
+	pci_write_config_byte(dev, 0x75, 0x0f);
+	/* Set the ide controller in native mode */
+	pci_write_config_byte(dev, 0x09, 0xff);
+
+	/* INTB = disabled, INTA = disabled */
+	pci_write_config_byte(dev, 0x48, 0x00);
+	/* INTD = disabled, INTC = disabled */
+	pci_write_config_byte(dev, 0x4a, 0x00);
+	/* Audio = INT7, Modem = disabled. */
+	pci_write_config_byte(dev, 0x4b, 0x60);
+	/* USB = INT7 */
+	pci_write_config_byte(dev, 0x74, 0x06);
+}
+DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk);
+
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 960edf89be5..c5118802a28 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -1,7 +1,7 @@
 /*
  * PIKA Warp(tm) board specific routines
  *
- * Copyright (c) 2008 PIKA Technologies
+ * Copyright (c) 2008-2009 PIKA Technologies
  *   Sean MacLennan <smaclennan@pikatech.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -15,6 +15,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/of_gpio.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -23,6 +24,7 @@
 #include <asm/uic.h>
 #include <asm/ppc4xx.h>
 
+
 static __initdata struct of_device_id warp_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
 	{ .compatible = "ibm,opb", },
@@ -55,6 +57,8 @@ define_machine(warp) {
 };
 
 
+static u32 post_info;
+
 /* I am not sure this is the best place for this... */
 static int __init warp_post_info(void)
 {
@@ -77,21 +81,21 @@ static int __init warp_post_info(void)
 
 	iounmap(fpga);
 
-	if (post1 || post2)
+	if (post1 || post2) {
 		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
-	else
+		post_info = 1;
+	} else
 		printk(KERN_INFO "Warp POST OK\n");
 
 	return 0;
 }
-machine_late_initcall(warp, warp_post_info);
 
 
 #ifdef CONFIG_SENSORS_AD7414
 
 static LIST_HEAD(dtm_shutdown_list);
 static void __iomem *dtm_fpga;
-static void __iomem *gpio_base;
+static unsigned green_led, red_led;
 
 
 struct dtm_shutdown {
@@ -134,14 +138,17 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
 static irqreturn_t temp_isr(int irq, void *context)
 {
 	struct dtm_shutdown *shutdown;
+	int value = 1;
 
 	local_irq_disable();
 
+	gpio_set_value(green_led, 0);
+
 	/* Run through the shutdown list. */
 	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
 		shutdown->func(shutdown->arg);
 
-	printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+	printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n");
 
 	while (1) {
 		if (dtm_fpga) {
@@ -149,52 +156,34 @@ static irqreturn_t temp_isr(int irq, void *context)
 			out_be32(dtm_fpga + 0x14, reset);
 		}
 
-		if (gpio_base) {
-			unsigned leds = in_be32(gpio_base);
-
-			/* green off, red toggle */
-			leds &= ~0x80000000;
-			leds ^=  0x40000000;
-
-			out_be32(gpio_base, leds);
-		}
-
+		gpio_set_value(red_led, value);
+		value ^= 1;
 		mdelay(500);
 	}
 }
 
 static int pika_setup_leds(void)
 {
-	struct device_node *np;
-	const u32 *gpios;
-	int len;
+	struct device_node *np, *child;
 
-	np = of_find_compatible_node(NULL, NULL, "linux,gpio-led");
+	np = of_find_compatible_node(NULL, NULL, "gpio-leds");
 	if (!np) {
-		printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n");
-		return -ENOENT;
-	}
-
-	gpios = of_get_property(np, "gpios", &len);
-	of_node_put(np);
-	if (!gpios || len < 4) {
-		printk(KERN_ERR __FILE__
-		       ": Unable to get gpios property (%d)\n", len);
+		printk(KERN_ERR __FILE__ ": Unable to find leds\n");
 		return -ENOENT;
 	}
 
-	np = of_find_node_by_phandle(gpios[0]);
-	if (!np) {
-		printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
-		return -ENOENT;
-	}
+	for_each_child_of_node(np, child)
+		if (strcmp(child->name, "green") == 0) {
+			green_led = of_get_gpio(child, 0);
+			/* Turn back on the green LED */
+			gpio_set_value(green_led, 1);
+		} else if (strcmp(child->name, "red") == 0) {
+			red_led = of_get_gpio(child, 0);
+			/* Set based on post */
+			gpio_set_value(red_led, post_info);
+		}
 
-	gpio_base = of_iomap(np, 0);
 	of_node_put(np);
-	if (!gpio_base) {
-		printk(KERN_ERR __FILE__ ": Unable to map gpio");
-		return -ENOMEM;
-	}
 
 	return 0;
 }
@@ -270,10 +259,10 @@ static int pika_dtm_thread(void __iomem *fpga)
 	}
 
 found_it:
-	i2c_put_adapter(adap);
-
 	pika_setup_critical_temp(client);
 
+	i2c_put_adapter(adap);
+
 	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
@@ -311,6 +300,9 @@ static int __init pika_dtm_start(void)
 	if (dtm_fpga == NULL)
 		return -ENOENT;
 
+	/* Must get post info before thread starts. */
+	warp_post_info();
+
 	dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
 	if (IS_ERR(dtm_thread)) {
 		iounmap(dtm_fpga);
@@ -333,6 +325,8 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
 	return 0;
 }
 
+machine_late_initcall(warp, warp_post_info);
+
 #endif
 
 EXPORT_SYMBOL(pika_dtm_register_shutdown);
diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c
index a2068faef6e..bcc69e1f77c 100644
--- a/arch/powerpc/platforms/52xx/efika.c
+++ b/arch/powerpc/platforms/52xx/efika.c
@@ -34,7 +34,7 @@
 static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			    int len, u32 * val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 	    | (((bus->number - hose->first_busno) & 0xff) << 16)
 	    | (hose->global_number << 24);
@@ -49,7 +49,7 @@ static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
 			     int offset, int len, u32 val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 	    | (((bus->number - hose->first_busno) & 0xff) << 16)
 	    | (hose->global_number << 24);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 87ff522f28b..dd43114e968 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -107,7 +107,7 @@ static int
 mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 				int offset, int len, u32 *val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	u32 value;
 
 	if (ppc_md.pci_exclude_device)
@@ -164,7 +164,7 @@ static int
 mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 				int offset, int len, u32 val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	u32 value, mask;
 
 	if (ppc_md.pci_exclude_device)
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index 0eb6d7f6224..51fcae41f08 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
 #include <linux/mdio-bitbang.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
@@ -115,7 +116,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 	struct mii_bus *bus;
 	struct resource res;
 	struct device_node *node;
-	int ret, i;
+	int ret;
 
 	node = of_get_parent(ofdev->node);
 	of_node_put(node);
@@ -130,17 +131,13 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 	if (!bus)
 		return -ENOMEM;
 
-	bus->phy_mask = 0;
 	bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		bus->irq[i] = -1;
-
 	bus->name = "ep8248e-mdio-bitbang";
 	bus->parent = &ofdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
-	return mdiobus_register(bus);
+	return of_mdiobus_register(bus, ofdev->node);
 }
 
 static int ep8248e_mdio_remove(struct of_device *ofdev)
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
index 984db42cc8e..6cf0f97486e 100644
--- a/arch/powerpc/platforms/82xx/pq2ads.h
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -24,10 +24,6 @@
 
 #include <linux/seq_file.h>
 
-/* Backword-compatibility stuff for the drivers */
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-#define CPM_IRQ_OFFSET 0
-
 /* The ADS8260 has 16, 32-bit wide control/status registers, accessed
  * only on word boundaries.
  * Not all are used (yet), or are interesting to us (yet).
@@ -44,14 +40,5 @@
 #define BCSR3_FETHIEN2		((uint)0x10000000)      /* 0 == enable*/
 #define BCSR3_FETH2_RST		((uint)0x80000000)      /* 0 == reset */
 
-/* cpm serial driver works with constants below */
-
-#define SIU_INT_SMC1		((uint)0x04+CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2		((uint)0x05+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC1		((uint)0x28+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC2		((uint)0x29+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
-
 #endif /* __MACH_ADS8260_DEFS */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7f066adc068..43d385cedcd 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -34,6 +34,7 @@ config MPC85xx_MDS
 	bool "Freescale MPC85xx MDS"
 	select DEFAULT_UIMAGE
 	select PHYLIB
+	select HAS_RAPIDIO
 	help
 	  This option enables support for the MPC85xx MDS board
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index de66de7a9ca..53d5851a6c9 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -163,7 +163,8 @@ static void __init mpc85xx_ds_setup_arch(void)
 #ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
 		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
+		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
 			struct resource rsrc;
 			of_address_to_resource(np, 0, &rsrc);
 			if ((rsrc.start & 0xfffff) == primary_phb_addr)
@@ -195,9 +196,9 @@ static int __init mpc8544_ds_probe(void)
 		primary_phb_addr = 0xb000;
 #endif
 		return 1;
-	} else {
-		return 0;
 	}
+
+	return 0;
 }
 
 static struct of_device_id __initdata mpc85xxds_ids[] = {
@@ -214,6 +215,7 @@ static int __init mpc85xxds_publish_devices(void)
 }
 machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
 machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
+machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -227,9 +229,26 @@ static int __init mpc8572_ds_probe(void)
 		primary_phb_addr = 0x8000;
 #endif
 		return 1;
-	} else {
-		return 0;
 	}
+
+	return 0;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p2020_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
+#ifdef CONFIG_PCI
+		primary_phb_addr = 0x9000;
+#endif
+		return 1;
+	}
+
+	return 0;
 }
 
 define_machine(mpc8544_ds) {
@@ -259,3 +278,17 @@ define_machine(mpc8572_ds) {
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
+
+define_machine(p2020_ds) {
+	.name			= "P2020 DS",
+	.probe			= p2020_ds_probe,
+	.setup_arch		= mpc85xx_ds_setup_arch,
+	.init_IRQ		= mpc85xx_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 7dd029034ae..b2c0a431997 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -206,23 +206,24 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 
 	if (bcsr_regs) {
+		if (machine_is(mpc8568_mds)) {
 #define BCSR_UCC1_GETH_EN	(0x1 << 7)
 #define BCSR_UCC2_GETH_EN	(0x1 << 7)
 #define BCSR_UCC1_MODE_MSK	(0x3 << 4)
 #define BCSR_UCC2_MODE_MSK	(0x3 << 0)
 
-		/* Turn off UCC1 & UCC2 */
-		clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
-		clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+			/* Turn off UCC1 & UCC2 */
+			clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+			clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
 
-		/* Mode is RGMII, all bits clear */
-		clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
-					 BCSR_UCC2_MODE_MSK);
-
-		/* Turn UCC1 & UCC2 on */
-		setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
-		setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+			/* Mode is RGMII, all bits clear */
+			clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
+						 BCSR_UCC2_MODE_MSK);
 
+			/* Turn UCC1 & UCC2 on */
+			setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+			setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+		}
 		iounmap(bcsr_regs);
 	}
 #endif	/* CONFIG_QUICC_ENGINE */
@@ -257,7 +258,8 @@ static int __init board_fixups(void)
 
 	return 0;
 }
-machine_arch_initcall(mpc85xx_mds, board_fixups);
+machine_arch_initcall(mpc8568_mds, board_fixups);
+machine_arch_initcall(mpc8569_mds, board_fixups);
 
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
@@ -276,7 +278,8 @@ static int __init mpc85xx_publish_devices(void)
 
 	return 0;
 }
-machine_device_initcall(mpc85xx_mds, mpc85xx_publish_devices);
+machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
+machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
@@ -321,8 +324,8 @@ static int __init mpc85xx_mds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxMDS");
 }
 
-define_machine(mpc85xx_mds) {
-	.name		= "MPC85xx MDS",
+define_machine(mpc8568_mds) {
+	.name		= "MPC8568 MDS",
 	.probe		= mpc85xx_mds_probe,
 	.setup_arch	= mpc85xx_mds_setup_arch,
 	.init_IRQ	= mpc85xx_mds_pic_init,
@@ -334,3 +337,24 @@ define_machine(mpc85xx_mds) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
 };
+
+static int __init mpc8569_mds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
+}
+
+define_machine(mpc8569_mds) {
+	.name		= "MPC8569 MDS",
+	.probe		= mpc8569_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
+	.get_irq	= mpic_get_irq,
+	.restart	= fsl_rstcr_restart,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index d79104669cd..2efa052975e 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -28,7 +28,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index af14f852d74..90754e752bd 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -28,7 +28,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index ea236063965..72b31a6010a 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -28,7 +28,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 3f49a6f893a..51eec0cd551 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -28,7 +28,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index c4ec49b5f7f..7e9e83c04a8 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -24,7 +24,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index 014e26cda08..d84bbb508ee 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -20,7 +20,6 @@
 #include <asm/pgtable.h>
 #include <asm/pci-bridge.h>
 #include <asm/mpic.h>
-#include <asm/mpc86xx.h>
 #include <asm/cacheflush.h>
 
 #include <sysdev/fsl_soc.h>
@@ -30,6 +29,11 @@
 extern void __secondary_start_mpc86xx(void);
 extern unsigned long __secondary_hold_acknowledge;
 
+#define MCM_PORT_CONFIG_OFFSET	0x10
+
+/* Offset from CCSRBAR */
+#define MPC86xx_MCM_OFFSET      (0x1000)
+#define MPC86xx_MCM_SIZE        (0x1000)
 
 static void __init
 smp_86xx_release_core(int nr)
@@ -48,6 +52,8 @@ smp_86xx_release_core(int nr)
 	pcr = in_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2));
 	pcr |= 1 << (nr + 24);
 	out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2), pcr);
+
+	iounmap(mcm_vaddr);
 }
 
 
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 2886a36fc08..51c8f331b67 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -25,7 +25,6 @@
 #include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index a5076668bad..19412f76fa3 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -17,10 +17,6 @@
 
 #include <sysdev/fsl_soc.h>
 
-#define MPC8xx_CPM_OFFSET	(0x9c0)
-#define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)
-#define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver
-
 /* Bits of interest in the BCSRs.
  */
 #define BCSR1_ETHEN		((uint)0x20000000)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index e3e87078d03..04a8061045c 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -329,4 +329,8 @@ config MCU_MPC8349EMITX
 	  also register MCU GPIOs with the generic GPIO API, so you'll able
 	  to use MCU pins as GPIOs.
 
+config XILINX_PCI
+	bool "Xilinx PCI host bridge support"
+	depends on PCI && XILINX_VIRTEX
+
 endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 732ee93a8e9..cca6b4fc719 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -10,7 +10,6 @@ menu "Processor support"
 choice
 	prompt "Processor Type"
 	depends on PPC32
-	default 6xx
 	help
 	  There are five families of 32 bit PowerPC chips supported.
 	  The most common ones are the desktop and server CPUs (601, 603,
@@ -22,7 +21,7 @@ choice
 
 	  If unsure, select 52xx/6xx/7xx/74xx/82xx/83xx/86xx.
 
-config 6xx
+config PPC_BOOK3S
 	bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
 	select PPC_FPU
 
@@ -58,13 +57,11 @@ config E200
 
 endchoice
 
-# Until we have a choice of exclusive CPU types on 64-bit, we always
-# use PPC_BOOK3S. On 32-bit, this is equivalent to 6xx which is
-# "classic" MMU
-
 config PPC_BOOK3S
-       def_bool y
-       depends on PPC64 || 6xx
+	default y
+	depends on PPC64
+	select PPC_FPU
+
 
 config POWER4_ONLY
 	bool "Optimize for POWER4"
@@ -75,6 +72,10 @@ config POWER4_ONLY
 	  The resulting binary will not work on POWER3 or RS64 processors
 	  when compiled with binutils 2.15 or later.
 
+config 6xx
+	def_bool y
+	depends on PPC32 && PPC_BOOK3S
+
 config POWER3
 	bool
 	depends on PPC64 && PPC_BOOK3S
@@ -203,9 +204,8 @@ config SPE
 	  If in doubt, say Y here.
 
 config PPC_STD_MMU
-	bool
-	depends on 6xx || PPC64
-	default y
+	def_bool y
+	depends on PPC_BOOK3S
 
 config PPC_STD_MMU_32
 	def_bool y
@@ -263,8 +263,8 @@ config SMP
 	  If you don't know what to do here, say N.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-1024)"
-	range 2 1024
+	int "Maximum number of CPUs (2-8192)"
+	range 2 8192
 	depends on SMP
 	default "32" if PPC64
 	default "4"
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 0ce45c2b42f..c71498dbf21 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -329,7 +329,7 @@ static struct irq_host_ops msic_host_ops = {
 
 static int axon_msi_shutdown(struct of_device *device)
 {
-	struct axon_msic *msic = device->dev.platform_data;
+	struct axon_msic *msic = dev_get_drvdata(&device->dev);
 	u32 tmp;
 
 	pr_debug("axon_msi: disabling %s\n",
@@ -416,7 +416,7 @@ static int axon_msi_probe(struct of_device *device,
 	msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
 				& MSIC_FIFO_SIZE_MASK;
 
-	device->dev.platform_data = msic;
+	dev_set_drvdata(&device->dev, msic);
 
 	ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;
 	ppc_md.teardown_msi_irqs = axon_msi_teardown_msi_irqs;
diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c
index f39a3b2a166..00eaaa71630 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.c
+++ b/arch/powerpc/platforms/cell/celleb_pci.c
@@ -162,8 +162,7 @@ static int celleb_fake_pci_read_config(struct pci_bus *bus,
 		unsigned int devfn, int where, int size, u32 *val)
 {
 	char *config;
-	struct device_node *node;
-	struct pci_controller *hose;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned int devno = devfn >> 3;
 	unsigned int fn = devfn & 0x7;
 
@@ -171,8 +170,6 @@ static int celleb_fake_pci_read_config(struct pci_bus *bus,
 	BUG_ON(where % size);
 
 	pr_debug("    fake read: bus=0x%x, ", bus->number);
-	node = (struct device_node *)bus->sysdata;
-	hose = pci_find_hose_for_OF_device(node);
 	config = get_fake_config_start(hose, devno, fn);
 
 	pr_debug("devno=0x%x, where=0x%x, size=0x%x, ", devno, where, size);
@@ -192,8 +189,7 @@ static int celleb_fake_pci_write_config(struct pci_bus *bus,
 		unsigned int devfn, int where, int size, u32 val)
 {
 	char *config;
-	struct device_node *node;
-	struct pci_controller *hose;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct celleb_pci_resource *res;
 	unsigned int devno = devfn >> 3;
 	unsigned int fn = devfn & 0x7;
@@ -201,8 +197,6 @@ static int celleb_fake_pci_write_config(struct pci_bus *bus,
 	/* allignment check */
 	BUG_ON(where % size);
 
-	node = (struct device_node *)bus->sysdata;
-	hose = pci_find_hose_for_OF_device(node);
 	config = get_fake_config_start(hose, devno, fn);
 
 	if (!config)
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c
index 48ec88a38a1..05b0db3ef63 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_epci.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_epci.c
@@ -134,15 +134,11 @@ static int celleb_epci_read_config(struct pci_bus *bus,
 {
 	PCI_IO_ADDR epci_base;
 	PCI_IO_ADDR addr;
-	struct device_node *node;
-	struct pci_controller *hose;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	/* allignment check */
 	BUG_ON(where % size);
 
-	node = (struct device_node *)bus->sysdata;
-	hose = pci_find_hose_for_OF_device(node);
-
 	if (!celleb_epci_get_epci_cfg(hose))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -198,16 +194,11 @@ static int celleb_epci_write_config(struct pci_bus *bus,
 {
 	PCI_IO_ADDR epci_base;
 	PCI_IO_ADDR addr;
-	struct device_node *node;
-	struct pci_controller *hose;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	/* allignment check */
 	BUG_ON(where % size);
 
-	node = (struct device_node *)bus->sysdata;
-	hose = pci_find_hose_for_OF_device(node);
-
-
 	if (!celleb_epci_get_epci_cfg(hose))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 3e7e0f1568e..7fca09f990b 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -366,11 +366,7 @@ static void config_write_pciex_rc(unsigned int __iomem *base, uint32_t where,
 static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, unsigned int *val)
 {
-	struct device_node *dn;
-	struct pci_controller *phb;
-
-	dn = bus->sysdata;
-	phb = pci_find_hose_for_OF_device(dn);
+	struct pci_controller *phb = pci_bus_to_host(bus);
 
 	if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) {
 		*val = ~0;
@@ -389,11 +385,7 @@ static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
 static int scc_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
 				  int where, int size, unsigned int val)
 {
-	struct device_node *dn;
-	struct pci_controller *phb;
-
-	dn = bus->sysdata;
-	phb = pci_find_hose_for_OF_device(dn);
+	struct pci_controller *phb = pci_bus_to_host(bus);
 
 	if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1)
 		return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index bed4690de39..5b34fc211f3 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -100,16 +100,6 @@
 #define IOSTE_PS_1M		0x0000000000000005ul /*   - 1MB  */
 #define IOSTE_PS_16M		0x0000000000000007ul /*   - 16MB */
 
-/* Page table entries */
-#define IOPTE_PP_W		0x8000000000000000ul /* protection: write */
-#define IOPTE_PP_R		0x4000000000000000ul /* protection: read */
-#define IOPTE_M			0x2000000000000000ul /* coherency required */
-#define IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
-#define IOPTE_SO_RW             0x1800000000000000ul /* ordering: r & w */
-#define IOPTE_RPN_Mask		0x07fffffffffff000ul /* RPN */
-#define IOPTE_H			0x0000000000000800ul /* cache hint */
-#define IOPTE_IOID_Mask		0x00000000000007fful /* ioid */
-
 
 /* IOMMU sizing */
 #define IO_SEGMENT_SHIFT	28
@@ -193,19 +183,21 @@ static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
 	 */
 	const unsigned long prot = 0xc48;
 	base_pte =
-		((prot << (52 + 4 * direction)) & (IOPTE_PP_W | IOPTE_PP_R))
-		| IOPTE_M | IOPTE_SO_RW | (window->ioid & IOPTE_IOID_Mask);
+		((prot << (52 + 4 * direction)) &
+		 (CBE_IOPTE_PP_W | CBE_IOPTE_PP_R)) |
+		CBE_IOPTE_M | CBE_IOPTE_SO_RW |
+		(window->ioid & CBE_IOPTE_IOID_Mask);
 #else
-	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
-		(window->ioid & IOPTE_IOID_Mask);
+	base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M |
+		CBE_IOPTE_SO_RW | (window->ioid & CBE_IOPTE_IOID_Mask);
 #endif
 	if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)))
-		base_pte &= ~IOPTE_SO_RW;
+		base_pte &= ~CBE_IOPTE_SO_RW;
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
 	for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE)
-		io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
+		io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask);
 
 	mb();
 
@@ -231,8 +223,9 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
 #else
 	/* spider bridge does PCI reads after freeing - insert a mapping
 	 * to a scratch page instead of an invalid entry */
-	pte = IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | __pa(window->iommu->pad_page)
-		| (window->ioid & IOPTE_IOID_Mask);
+	pte = CBE_IOPTE_PP_R | CBE_IOPTE_M | CBE_IOPTE_SO_RW |
+		__pa(window->iommu->pad_page) |
+		(window->ioid & CBE_IOPTE_IOID_Mask);
 #endif
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
@@ -1001,7 +994,7 @@ static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
 	pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
 		  addr, ptab, segment, offset);
 
-	ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask);
+	ptab[offset] = base_pte | (__pa(addr) & CBE_IOPTE_RPN_Mask);
 }
 
 static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
@@ -1016,14 +1009,14 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 
 	pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M
-		    | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
+	base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M |
+		(cell_iommu_get_ioid(np) & CBE_IOPTE_IOID_Mask);
 
 	if (iommu_fixed_is_weak)
 		pr_info("IOMMU: Using weak ordering for fixed mapping\n");
 	else {
 		pr_info("IOMMU: Using strong ordering for fixed mapping\n");
-		base_pte |= IOPTE_SO_RW;
+		base_pte |= CBE_IOPTE_SO_RW;
 	}
 
 	for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 296b5268754..5e0a191764f 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -122,8 +122,8 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
 
 	area->nid = nid;
 	area->order = order;
-	area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE,
-					area->order);
+	area->pages = alloc_pages_exact_node(area->nid, GFP_KERNEL|GFP_THISNODE,
+						area->order);
 
 	if (!area->pages) {
 		printk(KERN_WARNING "%s: no page on node %d\n",
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 9abd210d87c..8547e86bfb4 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -752,17 +752,8 @@ static int __init init_spu_base(void)
 		goto out_unregister_sysdev_class;
 	}
 
-	if (ret > 0) {
-		/*
-		 * We cannot put the forward declaration in
-		 * <linux/linux_logo.h> because of conflicting session type
-		 * conflicts for const and __initdata with different compiler
-		 * versions
-		 */
-		extern const struct linux_logo logo_spe_clut224;
-
+	if (ret > 0)
 		fb_append_extra_logo(&logo_spe_clut224, ret);
-	}
 
 	mutex_lock(&spu_full_list_mutex);
 	xmon_register_spus(&spu_full_list);
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 706eb5c7e2e..24b30b6909c 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -631,10 +631,6 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
 	if (IS_ERR(dentry))
 		goto out_dir;
 
-	ret = -EEXIST;
-	if (dentry->d_inode)
-		goto out_dput;
-
 	mode &= ~current_umask();
 
 	if (flags & SPU_CREATE_GANG)
@@ -648,8 +644,6 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
 		fsnotify_mkdir(nd->path.dentry->d_inode, dentry);
 	return ret;
 
-out_dput:
-	dput(dentry);
 out_dir:
 	mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
 out:
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index f6b0c519d5a..8f67a394b2d 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -34,7 +34,7 @@ int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
 			   int len, u32 *val)
 {
 	volatile void __iomem *cfg_data;
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	if (bus->number > 7)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -61,7 +61,7 @@ int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
 			    int len, u32 val)
 {
 	volatile void __iomem *cfg_data;
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	if (bus->number > 7)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -96,7 +96,7 @@ static struct pci_ops gg2_pci_ops =
 int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		     int len, u32 *val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 		| (((bus->number - hose->first_busno) & 0xff) << 16)
 		| (hose->global_number << 24);
@@ -111,7 +111,7 @@ int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		      int len, u32 val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 		| (((bus->number - hose->first_busno) & 0xff) << 16)
 		| (hose->global_number << 24);
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 65a35f38e06..fd23a1d4b39 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,13 +51,20 @@ u8 uli_pirq_to_irq[8] = {
 	ULI_8259_NONE,		/* PIRQH */
 };
 
+static inline bool is_quirk_valid(void)
+{
+	return (machine_is(mpc86xx_hpcn) ||
+		machine_is(mpc8544_ds) ||
+		machine_is(p2020_ds) ||
+		machine_is(mpc8572_ds));
+}
+
 /* Bridge */
 static void __devinit early_uli5249(struct pci_dev *dev)
 {
 	unsigned char temp;
 
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -80,8 +87,7 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
 	int i;
 
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	/*
@@ -149,8 +155,7 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
 	 * IRQ 14: Edge
 	 * IRQ 15: Edge
 	 */
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	outb(0xfa, 0x4d0);
@@ -176,8 +181,7 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
 	unsigned char c;
 	unsigned int d;
 
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	/* read/write lock */
@@ -201,8 +205,7 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
 	unsigned short temp;
 
-	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
-			!machine_is(mpc8572_ds))
+	if (!is_quirk_valid())
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -270,7 +273,6 @@ static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
 static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
 {
 	unsigned char c;
-	unsigned short temp;
 
 	if (!machine_is(mpc86xx_hpcd))
 		return;
diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c
index 4543c4bc3a5..c5a87a72057 100644
--- a/arch/powerpc/platforms/iseries/dt.c
+++ b/arch/powerpc/platforms/iseries/dt.c
@@ -204,7 +204,8 @@ static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
 	dt_prop(dt, name, &data, sizeof(u32));
 }
 
-static void __init dt_prop_u64(struct iseries_flat_dt *dt, const char *name,
+static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt,
+					      const char *name,
 		u64 data)
 {
 	dt_prop(dt, name, &data, sizeof(u64));
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 40219823d9b..6c1e1011959 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -177,7 +177,7 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
 static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
 {
 	struct iommu_table *tbl;
-	struct device_node *dn = pdev->sysdata;
+	struct device_node *dn = pci_device_to_OF_node(pdev);
 	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
 
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 3689c2413d2..fef4d515051 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -267,7 +267,8 @@ static struct pending_event *new_pending_event(void)
 	return ev;
 }
 
-static int signal_vsp_instruction(struct vsp_cmd_data *vsp_cmd)
+static int __maybe_unused
+signal_vsp_instruction(struct vsp_cmd_data *vsp_cmd)
 {
 	struct pending_event *ev = new_pending_event();
 	int rc;
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 21cddc30220..175aac8ca7e 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -318,6 +318,7 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
 {
 	struct resource *bar_res = &dev->resource[bar_num];
 	long bar_size = pci_resource_len(dev, bar_num);
+	struct device_node *dn = pci_device_to_OF_node(dev);
 
 	/*
 	 * No space to allocate, quick exit, skip Allocation.
@@ -335,9 +336,9 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
 	 * Allocate the number of table entries needed for BAR.
 	 */
 	while (bar_size > 0 ) {
-		iomm_table[current_iomm_table_entry] = dev->sysdata;
+		iomm_table[current_iomm_table_entry] = dn;
 		ds_addr_table[current_iomm_table_entry] =
-			iseries_ds_addr(dev->sysdata) | (bar_num << 24);
+			iseries_ds_addr(dn) | (bar_num << 24);
 		bar_size -= IOMM_TABLE_ENTRY_SIZE;
 		++current_iomm_table_entry;
 	}
@@ -410,7 +411,7 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 	struct device_node *node;
 	int i;
 
-	node = find_device_node(bus, pdev->devfn);
+	node = pci_device_to_OF_node(pdev);
 	pr_debug("PCI: iSeries %s, pdev %p, node %p\n",
 		 pci_name(pdev), pdev, node);
 	if (!node) {
@@ -441,7 +442,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 		}
 	}
 
-	pdev->sysdata = node;
 	allocate_device_bars(pdev);
 	iseries_device_information(pdev, bus, *sub_bus);
 }
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index 75cc165d5be..3bf546797cb 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -29,7 +29,7 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/phy.h>
-#include <linux/platform_device.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #define DELAY 1
@@ -39,6 +39,7 @@ static void __iomem *gpio_regs;
 struct gpio_priv {
 	int mdc_pin;
 	int mdio_pin;
+	int mdio_irqs[PHY_MAX_ADDR];
 };
 
 #define MDC_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdc_pin)
@@ -218,12 +219,11 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 				     const struct of_device_id *match)
 {
 	struct device *dev = &ofdev->dev;
-	struct device_node *phy_dn, *np = ofdev->node;
+	struct device_node *np = ofdev->node;
 	struct mii_bus *new_bus;
 	struct gpio_priv *priv;
 	const unsigned int *prop;
 	int err;
-	int i;
 
 	err = -ENOMEM;
 	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
@@ -244,27 +244,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
 	new_bus->priv = priv;
 
-	new_bus->phy_mask = 0;
-
-	new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-
-	if (!new_bus->irq)
-		goto out_free_bus;
-
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		new_bus->irq[i] = NO_IRQ;
-
-	for (phy_dn = of_get_next_child(np, NULL);
-	     phy_dn != NULL;
-	     phy_dn = of_get_next_child(np, phy_dn)) {
-		const unsigned int *ip, *regp;
-
-		ip = of_get_property(phy_dn, "interrupts", NULL);
-		regp = of_get_property(phy_dn, "reg", NULL);
-		if (!ip || !regp || *regp >= PHY_MAX_ADDR)
-			continue;
-		new_bus->irq[*regp] = irq_create_mapping(NULL, *ip);
-	}
+	new_bus->irq = priv->mdio_irqs;
 
 	prop = of_get_property(np, "mdc-pin", NULL);
 	priv->mdc_pin = *prop;
@@ -275,7 +255,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	new_bus->parent = dev;
 	dev_set_drvdata(dev, new_bus);
 
-	err = mdiobus_register(new_bus);
+	err = of_mdiobus_register(new_bus, np);
 
 	if (err != 0) {
 		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
@@ -286,8 +266,6 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	return 0;
 
 out_free_irq:
-	kfree(new_bus->irq);
-out_free_bus:
 	kfree(new_bus);
 out_free_priv:
 	kfree(priv);
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 7039d8f1d3b..dce73634910 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -221,7 +221,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
 			continue;
 		irq += __ilog2(bits);
 		spin_unlock_irqrestore(&pmac_pic_lock, flags);
-		__do_IRQ(irq);
+		generic_handle_irq(irq);
 		spin_lock_irqsave(&pmac_pic_lock, flags);
 		rc = IRQ_HANDLED;
 	}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 45936c9ed0e..86f69a4eb49 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -655,7 +655,7 @@ static int __init pmac_probe(void)
 /* Move that to pci.c */
 static int pmac_pci_probe_mode(struct pci_bus *bus)
 {
-	struct device_node *node = bus->sysdata;
+	struct device_node *node = pci_bus_to_OF_node(bus);
 
 	/* We need to use normal PCI probing for the AGP bus,
 	 * since the device for the AGP bridge isn't in the tree.
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 9a2b6d94861..846eb8b57fd 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -24,6 +24,7 @@
 #include <linux/lmb.h>
 
 #include <asm/firmware.h>
+#include <asm/iommu.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
@@ -605,9 +606,8 @@ static int dma_ioc0_map_pages(struct ps3_dma_region *r, unsigned long phys_addr,
 				       r->ioid,
 				       iopte_flag);
 		if (result) {
-			printk(KERN_WARNING "%s:%d: lv1_map_device_dma_region "
-				"failed: %s\n", __func__, __LINE__,
-				ps3_result(result));
+			pr_warning("%s:%d: lv1_put_iopte failed: %s\n",
+				   __func__, __LINE__, ps3_result(result));
 			goto fail_map;
 		}
 		DBG("%s: pg=%d bus=%#lx, lpar=%#lx, ioid=%#x\n", __func__,
@@ -1001,7 +1001,8 @@ static int dma_sb_region_create_linear(struct ps3_dma_region *r)
 		if (len > r->len)
 			len = r->len;
 		result = dma_sb_map_area(r, virt_addr, len, &tmp,
-			IOPTE_PP_W | IOPTE_PP_R | IOPTE_SO_RW | IOPTE_M);
+			CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_SO_RW |
+			CBE_IOPTE_M);
 		BUG_ON(result);
 	}
 
@@ -1014,7 +1015,8 @@ static int dma_sb_region_create_linear(struct ps3_dma_region *r)
 		else
 			len -= map.rm.size - r->offset;
 		result = dma_sb_map_area(r, virt_addr, len, &tmp,
-			IOPTE_PP_W | IOPTE_PP_R | IOPTE_SO_RW | IOPTE_M);
+			CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_SO_RW |
+			CBE_IOPTE_M);
 		BUG_ON(result);
 	}
 
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index cf1cd0f8c18..d6487a9c801 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -226,6 +226,44 @@ static struct property property_av_multi_out = {
 	.value = &saved_params.av_multi_out,
 };
 
+
+static DEFINE_MUTEX(os_area_flash_mutex);
+
+static const struct ps3_os_area_flash_ops *os_area_flash_ops;
+
+void ps3_os_area_flash_register(const struct ps3_os_area_flash_ops *ops)
+{
+	mutex_lock(&os_area_flash_mutex);
+	os_area_flash_ops = ops;
+	mutex_unlock(&os_area_flash_mutex);
+}
+EXPORT_SYMBOL_GPL(ps3_os_area_flash_register);
+
+static ssize_t os_area_flash_read(void *buf, size_t count, loff_t pos)
+{
+	ssize_t res = -ENODEV;
+
+	mutex_lock(&os_area_flash_mutex);
+	if (os_area_flash_ops)
+		res = os_area_flash_ops->read(buf, count, pos);
+	mutex_unlock(&os_area_flash_mutex);
+
+	return res;
+}
+
+static ssize_t os_area_flash_write(const void *buf, size_t count, loff_t pos)
+{
+	ssize_t res = -ENODEV;
+
+	mutex_lock(&os_area_flash_mutex);
+	if (os_area_flash_ops)
+		res = os_area_flash_ops->write(buf, count, pos);
+	mutex_unlock(&os_area_flash_mutex);
+
+	return res;
+}
+
+
 /**
  * os_area_set_property - Add or overwrite a saved_params value to the device tree.
  *
@@ -352,12 +390,12 @@ static int db_verify(const struct os_area_db *db)
 	if (memcmp(db->magic_num, OS_AREA_DB_MAGIC_NUM,
 		sizeof(db->magic_num))) {
 		pr_debug("%s:%d magic_num failed\n", __func__, __LINE__);
-		return -1;
+		return -EINVAL;
 	}
 
 	if (db->version != 1) {
 		pr_debug("%s:%d version failed\n", __func__, __LINE__);
-		return -1;
+		return -EINVAL;
 	}
 
 	return 0;
@@ -578,59 +616,48 @@ static void os_area_db_init(struct os_area_db *db)
  *
  */
 
-static void __maybe_unused update_flash_db(void)
+static int update_flash_db(void)
 {
-	int result;
-	int file;
-	off_t offset;
+	const unsigned int buf_len = 8 * OS_AREA_SEGMENT_SIZE;
+	struct os_area_header *header;
 	ssize_t count;
-	static const unsigned int buf_len = 8 * OS_AREA_SEGMENT_SIZE;
-	const struct os_area_header *header;
+	int error;
+	loff_t pos;
 	struct os_area_db* db;
 
 	/* Read in header and db from flash. */
 
-	file = sys_open("/dev/ps3flash", O_RDWR, 0);
-
-	if (file < 0) {
-		pr_debug("%s:%d sys_open failed\n", __func__, __LINE__);
-		goto fail_open;
-	}
-
 	header = kmalloc(buf_len, GFP_KERNEL);
-
 	if (!header) {
-		pr_debug("%s:%d kmalloc failed\n", __func__, __LINE__);
-		goto fail_malloc;
+		pr_debug("%s: kmalloc failed\n", __func__);
+		return -ENOMEM;
 	}
 
-	offset = sys_lseek(file, 0, SEEK_SET);
-
-	if (offset != 0) {
-		pr_debug("%s:%d sys_lseek failed\n", __func__, __LINE__);
-		goto fail_header_seek;
+	count = os_area_flash_read(header, buf_len, 0);
+	if (count < 0) {
+		pr_debug("%s: os_area_flash_read failed %zd\n", __func__,
+			 count);
+		error = count;
+		goto fail;
 	}
 
-	count = sys_read(file, (char __user *)header, buf_len);
-
-	result = count < OS_AREA_SEGMENT_SIZE || verify_header(header)
-		|| count < header->db_area_offset * OS_AREA_SEGMENT_SIZE;
-
-	if (result) {
-		pr_debug("%s:%d verify_header failed\n", __func__, __LINE__);
+	pos = header->db_area_offset * OS_AREA_SEGMENT_SIZE;
+	if (count < OS_AREA_SEGMENT_SIZE || verify_header(header) ||
+	    count < pos) {
+		pr_debug("%s: verify_header failed\n", __func__);
 		dump_header(header);
-		goto fail_header;
+		error = -EINVAL;
+		goto fail;
 	}
 
 	/* Now got a good db offset and some maybe good db data. */
 
-	db = (void*)header + header->db_area_offset * OS_AREA_SEGMENT_SIZE;
+	db = (void *)header + pos;
 
-	result = db_verify(db);
-
-	if (result) {
-		printk(KERN_NOTICE "%s:%d: Verify of flash database failed, "
-			"formatting.\n", __func__, __LINE__);
+	error = db_verify(db);
+	if (error) {
+		pr_notice("%s: Verify of flash database failed, formatting.\n",
+			  __func__);
 		dump_db(db);
 		os_area_db_init(db);
 	}
@@ -639,29 +666,16 @@ static void __maybe_unused update_flash_db(void)
 
 	db_set_64(db, &os_area_db_id_rtc_diff, saved_params.rtc_diff);
 
-	offset = sys_lseek(file, header->db_area_offset * OS_AREA_SEGMENT_SIZE,
-		SEEK_SET);
-
-	if (offset != header->db_area_offset * OS_AREA_SEGMENT_SIZE) {
-		pr_debug("%s:%d sys_lseek failed\n", __func__, __LINE__);
-		goto fail_db_seek;
-	}
-
-	count = sys_write(file, (const char __user *)db,
-		sizeof(struct os_area_db));
-
+	count = os_area_flash_write(db, sizeof(struct os_area_db), pos);
 	if (count < sizeof(struct os_area_db)) {
-		pr_debug("%s:%d sys_write failed\n", __func__, __LINE__);
+		pr_debug("%s: os_area_flash_write failed %zd\n", __func__,
+			 count);
+		error = count < 0 ? count : -EIO;
 	}
 
-fail_db_seek:
-fail_header:
-fail_header_seek:
+fail:
 	kfree(header);
-fail_malloc:
-	sys_close(file);
-fail_open:
-	return;
+	return error;
 }
 
 /**
@@ -674,11 +688,11 @@ fail_open:
 static void os_area_queue_work_handler(struct work_struct *work)
 {
 	struct device_node *node;
+	int error;
 
 	pr_debug(" -> %s:%d\n", __func__, __LINE__);
 
 	node = of_find_node_by_path("/");
-
 	if (node) {
 		os_area_set_property(node, &property_rtc_diff);
 		of_node_put(node);
@@ -686,12 +700,10 @@ static void os_area_queue_work_handler(struct work_struct *work)
 		pr_debug("%s:%d of_find_node_by_path failed\n",
 			__func__, __LINE__);
 
-#if defined(CONFIG_PS3_FLASH) || defined(CONFIG_PS3_FLASH_MODULE)
-	update_flash_db();
-#else
-	printk(KERN_WARNING "%s:%d: No flash rom driver configured.\n",
-		__func__, __LINE__);
-#endif
+	error = update_flash_db();
+	if (error)
+		pr_warning("%s: Could not update FLASH ROM\n", __func__);
+
 	pr_debug(" <- %s:%d\n", __func__, __LINE__);
 }
 
@@ -808,7 +820,7 @@ u64 ps3_os_area_get_rtc_diff(void)
 {
 	return saved_params.rtc_diff;
 }
-EXPORT_SYMBOL(ps3_os_area_get_rtc_diff);
+EXPORT_SYMBOL_GPL(ps3_os_area_get_rtc_diff);
 
 /**
  * ps3_os_area_set_rtc_diff - Set the rtc diff value.
@@ -824,7 +836,7 @@ void ps3_os_area_set_rtc_diff(u64 rtc_diff)
 		os_area_queue_work();
 	}
 }
-EXPORT_SYMBOL(ps3_os_area_set_rtc_diff);
+EXPORT_SYMBOL_GPL(ps3_os_area_set_rtc_diff);
 
 /**
  * ps3_os_area_get_av_multi_out - Returns the default video mode.
diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h
index 136aa0637d9..9a196a88eda 100644
--- a/arch/powerpc/platforms/ps3/platform.h
+++ b/arch/powerpc/platforms/ps3/platform.h
@@ -232,14 +232,4 @@ int ps3_repository_read_spu_resource_id(unsigned int res_index,
 int ps3_repository_read_vuart_av_port(unsigned int *port);
 int ps3_repository_read_vuart_sysmgr_port(unsigned int *port);
 
-/* Page table entries */
-#define IOPTE_PP_W		0x8000000000000000ul /* protection: write */
-#define IOPTE_PP_R		0x4000000000000000ul /* protection: read */
-#define IOPTE_M			0x2000000000000000ul /* coherency required */
-#define IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
-#define IOPTE_SO_RW             0x1800000000000000ul /* ordering: r & w */
-#define IOPTE_RPN_Mask		0x07fffffffffff000ul /* RPN */
-#define IOPTE_H			0x0000000000000800ul /* cache hint */
-#define IOPTE_IOID_Mask		0x00000000000007fful /* ioid */
-
 #endif
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 1a7b5ae0c83..149bea2ce58 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -32,6 +32,7 @@
 #include <asm/udbg.h>
 #include <asm/prom.h>
 #include <asm/lv1call.h>
+#include <asm/ps3gpu.h>
 
 #include "platform.h"
 
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index a0927a3bacb..f6e04bcc70e 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -32,12 +32,6 @@
 #define DBG pr_debug
 #endif
 
-static irqreturn_t ipi_function_handler(int irq, void *msg)
-{
-	smp_message_recv((int)(long)msg);
-	return IRQ_HANDLED;
-}
-
 /**
   * ps3_ipi_virqs - a per cpu array of virqs for ipi use
   */
@@ -45,13 +39,6 @@ static irqreturn_t ipi_function_handler(int irq, void *msg)
 #define MSG_COUNT 4
 static DEFINE_PER_CPU(unsigned int, ps3_ipi_virqs[MSG_COUNT]);
 
-static const char *names[MSG_COUNT] = {
-	"ipi call",
-	"ipi reschedule",
-	"ipi migrate",
-	"ipi debug brk"
-};
-
 static void do_message_pass(int target, int msg)
 {
 	int result;
@@ -119,8 +106,7 @@ static void __init ps3_smp_setup_cpu(int cpu)
 		DBG("%s:%d: (%d, %d) => virq %u\n",
 			__func__, __LINE__, cpu, i, virqs[i]);
 
-		result = request_irq(virqs[i], ipi_function_handler,
-			IRQF_DISABLED, names[i], (void*)(long)i);
+		result = smp_request_message_ipi(virqs[i], i);
 
 		if (result)
 			virqs[i] = NO_IRQ;
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9a73d023863..9fead0faf38 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -27,6 +27,7 @@
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
 #include <asm/firmware.h>
+#include <asm/iommu.h>
 
 #include "platform.h"
 
@@ -531,7 +532,8 @@ static void * ps3_alloc_coherent(struct device *_dev, size_t size,
 	}
 
 	result = ps3_dma_map(dev->d_region, virt_addr, size, dma_handle,
-			     IOPTE_PP_W | IOPTE_PP_R | IOPTE_SO_RW | IOPTE_M);
+			     CBE_IOPTE_PP_W | CBE_IOPTE_PP_R |
+			     CBE_IOPTE_SO_RW | CBE_IOPTE_M);
 
 	if (result) {
 		pr_debug("%s:%d: ps3_dma_map failed (%d)\n",
@@ -575,7 +577,8 @@ static dma_addr_t ps3_sb_map_page(struct device *_dev, struct page *page,
 
 	result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size,
 			     &bus_addr,
-			     IOPTE_PP_R | IOPTE_PP_W | IOPTE_SO_RW | IOPTE_M);
+			     CBE_IOPTE_PP_R | CBE_IOPTE_PP_W |
+			     CBE_IOPTE_SO_RW | CBE_IOPTE_M);
 
 	if (result) {
 		pr_debug("%s:%d: ps3_dma_map failed (%d)\n",
@@ -596,16 +599,16 @@ static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page,
 	u64 iopte_flag;
 	void *ptr = page_address(page) + offset;
 
-	iopte_flag = IOPTE_M;
+	iopte_flag = CBE_IOPTE_M;
 	switch (direction) {
 	case DMA_BIDIRECTIONAL:
-		iopte_flag |= IOPTE_PP_R | IOPTE_PP_W | IOPTE_SO_RW;
+		iopte_flag |= CBE_IOPTE_PP_R | CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW;
 		break;
 	case DMA_TO_DEVICE:
-		iopte_flag |= IOPTE_PP_R | IOPTE_SO_R;
+		iopte_flag |= CBE_IOPTE_PP_R | CBE_IOPTE_SO_R;
 		break;
 	case DMA_FROM_DEVICE:
-		iopte_flag |= IOPTE_PP_W | IOPTE_SO_RW;
+		iopte_flag |= CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW;
 		break;
 	default:
 		/* not happned */
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 3ee01b4f425..661c8e02bcb 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -388,7 +388,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
 
 		while (pci->phb->dma_window_size * children > 0x80000000ul)
 			pci->phb->dma_window_size >>= 1;
-		pr_debug("No ISA/IDE, window size is 0x%lx\n",
+		pr_debug("No ISA/IDE, window size is 0x%llx\n",
 			 pci->phb->dma_window_size);
 		pci->phb->dma_window_base_cur = 0;
 
@@ -414,7 +414,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
 	while (pci->phb->dma_window_size * children > 0x70000000ul)
 		pci->phb->dma_window_size >>= 1;
 
-	pr_debug("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size);
+	pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size);
 }
 
 
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 52a80e5840e..e3139fa5e55 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -609,3 +609,55 @@ void __init hpte_init_lpar(void)
 	ppc_md.flush_hash_range	= pSeries_lpar_flush_hash_range;
 	ppc_md.hpte_clear_all   = pSeries_lpar_hptab_clear;
 }
+
+#ifdef CONFIG_PPC_SMLPAR
+#define CMO_FREE_HINT_DEFAULT 1
+static int cmo_free_hint_flag = CMO_FREE_HINT_DEFAULT;
+
+static int __init cmo_free_hint(char *str)
+{
+	char *parm;
+	parm = strstrip(str);
+
+	if (strcasecmp(parm, "no") == 0 || strcasecmp(parm, "off") == 0) {
+		printk(KERN_INFO "cmo_free_hint: CMO free page hinting is not active.\n");
+		cmo_free_hint_flag = 0;
+		return 1;
+	}
+
+	cmo_free_hint_flag = 1;
+	printk(KERN_INFO "cmo_free_hint: CMO free page hinting is active.\n");
+
+	if (strcasecmp(parm, "yes") == 0 || strcasecmp(parm, "on") == 0)
+		return 1;
+
+	return 0;
+}
+
+__setup("cmo_free_hint=", cmo_free_hint);
+
+static void pSeries_set_page_state(struct page *page, int order,
+				   unsigned long state)
+{
+	int i, j;
+	unsigned long cmo_page_sz, addr;
+
+	cmo_page_sz = cmo_get_page_size();
+	addr = __pa((unsigned long)page_address(page));
+
+	for (i = 0; i < (1 << order); i++, addr += PAGE_SIZE) {
+		for (j = 0; j < PAGE_SIZE; j += cmo_page_sz)
+			plpar_hcall_norets(H_PAGE_INIT, state, addr + j, 0);
+	}
+}
+
+void arch_free_page(struct page *page, int order)
+{
+	if (!cmo_free_hint_flag || !firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	pSeries_set_page_state(page, order, H_PAGE_SET_UNUSED);
+}
+EXPORT_SYMBOL(arch_free_page);
+
+#endif
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index afad9f5ac0a..b3cbac85592 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -19,7 +19,7 @@
 #include <linux/vmalloc.h>
 #include <linux/spinlock.h>
 #include <linux/cpu.h>
-#include <linux/delay.h>
+#include <linux/workqueue.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -387,36 +387,51 @@ static void do_event_scan(void)
 	} while(error == 0);
 }
 
-static void do_event_scan_all_cpus(long delay)
+static void rtas_event_scan(struct work_struct *w);
+DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan);
+
+/*
+ * Delay should be at least one second since some machines have problems if
+ * we call event-scan too quickly.
+ */
+static unsigned long event_scan_delay = 1*HZ;
+static int first_pass = 1;
+
+static void rtas_event_scan(struct work_struct *w)
 {
-	int cpu;
+	unsigned int cpu;
+
+	do_event_scan();
 
 	get_online_cpus();
-	cpu = first_cpu(cpu_online_map);
-	for (;;) {
-		set_cpus_allowed(current, cpumask_of_cpu(cpu));
-		do_event_scan();
-		set_cpus_allowed(current, CPU_MASK_ALL);
-
-		/* Drop hotplug lock, and sleep for the specified delay */
-		put_online_cpus();
-		msleep_interruptible(delay);
-		get_online_cpus();
-
-		cpu = next_cpu(cpu, cpu_online_map);
-		if (cpu == NR_CPUS)
-			break;
+
+	cpu = next_cpu(smp_processor_id(), cpu_online_map);
+	if (cpu == NR_CPUS) {
+		cpu = first_cpu(cpu_online_map);
+
+		if (first_pass) {
+			first_pass = 0;
+			event_scan_delay = 30*HZ/rtas_event_scan_rate;
+
+			if (surveillance_timeout != -1) {
+				pr_debug("rtasd: enabling surveillance\n");
+				enable_surveillance(surveillance_timeout);
+				pr_debug("rtasd: surveillance enabled\n");
+			}
+		}
 	}
+
+	schedule_delayed_work_on(cpu, &event_scan_work,
+		__round_jiffies_relative(event_scan_delay, cpu));
+
 	put_online_cpus();
 }
 
-static int rtasd(void *unused)
+static void start_event_scan(void)
 {
 	unsigned int err_type;
 	int rc;
 
-	daemonize("rtasd");
-
 	printk(KERN_DEBUG "RTAS daemon started\n");
 	pr_debug("rtasd: will sleep for %d milliseconds\n",
 		 (30000 / rtas_event_scan_rate));
@@ -434,22 +449,8 @@ static int rtasd(void *unused)
 		}
 	}
 
-	/* First pass. */
-	do_event_scan_all_cpus(1000);
-
-	if (surveillance_timeout != -1) {
-		pr_debug("rtasd: enabling surveillance\n");
-		enable_surveillance(surveillance_timeout);
-		pr_debug("rtasd: surveillance enabled\n");
-	}
-
-	/* Delay should be at least one second since some
-	 * machines have problems if we call event-scan too
-	 * quickly. */
-	for (;;)
-		do_event_scan_all_cpus(30000/rtas_event_scan_rate);
-
-	return -EINVAL;
+	schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
+				 event_scan_delay);
 }
 
 static int __init rtas_init(void)
@@ -487,8 +488,7 @@ static int __init rtas_init(void)
 	if (!entry)
 		printk(KERN_ERR "Failed to create error_log proc entry\n");
 
-	if (kernel_thread(rtasd, NULL, CLONE_FS) < 0)
-		printk(KERN_ERR "Failed to start RTAS daemon\n");
+	start_event_scan();
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index ec341707e41..8d75ea21296 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -63,6 +63,7 @@
 #include <asm/smp.h>
 #include <asm/firmware.h>
 #include <asm/eeh.h>
+#include <asm/pSeries_reconfig.h>
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
@@ -254,6 +255,29 @@ static void __init pseries_discover_pic(void)
 	       " interrupt-controller\n");
 }
 
+static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
+{
+	struct device_node *np = node;
+	struct pci_dn *pci = NULL;
+	int err = NOTIFY_OK;
+
+	switch (action) {
+	case PSERIES_RECONFIG_ADD:
+		pci = np->parent->data;
+		if (pci)
+			update_dn_pci_info(np, pci->phb);
+		break;
+	default:
+		err = NOTIFY_DONE;
+		break;
+	}
+	return err;
+}
+
+static struct notifier_block pci_dn_reconfig_nb = {
+	.notifier_call = pci_dn_reconfig_notifier,
+};
+
 static void __init pSeries_setup_arch(void)
 {
 	/* Discover PIC type and setup ppc_md accordingly */
@@ -271,6 +295,7 @@ static void __init pSeries_setup_arch(void)
 	/* Find and initialize PCI host bridges */
 	init_pci_config_tokens();
 	find_and_init_phbs();
+	pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
 	eeh_init();
 
 	pSeries_nvram_init();
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index b33b28a6fe1..2d1c87dd5d1 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_IPIC)		+= ipic.o
 obj-$(CONFIG_4xx)		+= uic.o
 obj-$(CONFIG_4xx_SOC)		+= ppc4xx_soc.o
 obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o
+obj-$(CONFIG_XILINX_PCI)	+= xilinx_pci.o
 obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index fd969f0e312..eb5927212fa 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -61,7 +61,7 @@ EXPORT_SYMBOL(cpm2_immr);
 void __init cpm2_reset(void)
 {
 #ifdef CONFIG_PPC_85xx
-	cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+	cpm2_immr = ioremap(get_immrbase() + 0x80000, CPM_MAP_SIZE);
 #else
 	cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
 #endif
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index f25ce818d40..da38a1ff97b 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -113,8 +113,13 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
 				  struct msi_msg *msg)
 {
 	struct fsl_msi *msi_data = fsl_msi;
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	u32 base = 0;
 
-	msg->address_lo = msi_data->msi_addr_lo;
+	pci_bus_read_config_dword(hose->bus,
+		PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base);
+
+	msg->address_lo = msi_data->msi_addr_lo + base;
 	msg->address_hi = msi_data->msi_addr_hi;
 	msg->data = hwirq;
 
@@ -271,7 +276,7 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
 	msi->irqhost->host_data = msi;
 
 	msi->msi_addr_hi = 0x0;
-	msi->msi_addr_lo = res.start + features->msiir_offset;
+	msi->msi_addr_lo = features->msiir_offset + (res.start & 0xfffff);
 
 	rc = fsl_msi_init_allocator(msi);
 	if (rc) {
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 78021d8afc5..ae88b144801 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -23,6 +23,8 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/lmb.h>
+#include <linux/log2.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -96,7 +98,13 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 				  struct resource *rsrc)
 {
 	struct ccsr_pci __iomem *pci;
-	int i, j, n;
+	int i, j, n, mem_log, win_idx = 2;
+	u64 mem, sz, paddr_hi = 0;
+	u64 paddr_lo = ULLONG_MAX;
+	u32 pcicsrbar = 0, pcicsrbar_sz;
+	u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
+			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
+	char *name = hose->dn->full_name;
 
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		    (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
@@ -117,6 +125,9 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 		if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
 			continue;
 
+		paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start);
+		paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end);
+
 		n = setup_one_atmu(pci, j, &hose->mem_resources[i],
 				   hose->pci_mem_offset);
 
@@ -147,10 +158,105 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 		}
 	}
 
-	/* Setup 2G inbound Memory Window @ 1 */
-	out_be32(&pci->piw[2].pitar, 0x00000000);
-	out_be32(&pci->piw[2].piwbar,0x00000000);
-	out_be32(&pci->piw[2].piwar, PIWAR_2G);
+	/* convert to pci address space */
+	paddr_hi -= hose->pci_mem_offset;
+	paddr_lo -= hose->pci_mem_offset;
+
+	if (paddr_hi == paddr_lo) {
+		pr_err("%s: No outbound window space\n", name);
+		return ;
+	}
+
+	if (paddr_lo == 0) {
+		pr_err("%s: No space for inbound window\n", name);
+		return ;
+	}
+
+	/* setup PCSRBAR/PEXCSRBAR */
+	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
+	early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
+	pcicsrbar_sz = ~pcicsrbar_sz + 1;
+
+	if (paddr_hi < (0x100000000ull - pcicsrbar_sz) ||
+		(paddr_lo > 0x100000000ull))
+		pcicsrbar = 0x100000000ull - pcicsrbar_sz;
+	else
+		pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz;
+	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar);
+
+	paddr_lo = min(paddr_lo, (u64)pcicsrbar);
+
+	pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar);
+
+	/* Setup inbound mem window */
+	mem = lmb_end_of_DRAM();
+	sz = min(mem, paddr_lo);
+	mem_log = __ilog2_u64(sz);
+
+	/* PCIe can overmap inbound & outbound since RX & TX are separated */
+	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+		/* Size window to exact size if power-of-two or one size up */
+		if ((1ull << mem_log) != mem) {
+			if ((1ull << mem_log) > mem)
+				pr_info("%s: Setting PCI inbound window "
+					"greater than memory size\n", name);
+			mem_log++;
+		}
+
+		piwar |= (mem_log - 1);
+
+		/* Setup inbound memory window */
+		out_be32(&pci->piw[win_idx].pitar,  0x00000000);
+		out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
+		out_be32(&pci->piw[win_idx].piwar,  piwar);
+		win_idx--;
+
+		hose->dma_window_base_cur = 0x00000000;
+		hose->dma_window_size = (resource_size_t)sz;
+	} else {
+		u64 paddr = 0;
+
+		/* Setup inbound memory window */
+		out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
+		out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+		out_be32(&pci->piw[win_idx].piwar,  (piwar | (mem_log - 1)));
+		win_idx--;
+
+		paddr += 1ull << mem_log;
+		sz -= 1ull << mem_log;
+
+		if (sz) {
+			mem_log = __ilog2_u64(sz);
+			piwar |= (mem_log - 1);
+
+			out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
+			out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+			out_be32(&pci->piw[win_idx].piwar,  piwar);
+			win_idx--;
+
+			paddr += 1ull << mem_log;
+		}
+
+		hose->dma_window_base_cur = 0x00000000;
+		hose->dma_window_size = (resource_size_t)paddr;
+	}
+
+	if (hose->dma_window_size < mem) {
+#ifndef CONFIG_SWIOTLB
+		pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to "
+			"map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
+			 name);
+#endif
+		/* adjusting outbound windows could reclaim space in mem map */
+		if (paddr_hi < 0xffffffffull)
+			pr_warning("%s: WARNING: Outbound window cfg leaves "
+				"gaps in memory map. Adjusting the memory map "
+				"could reduce unnecessary bounce buffering.\n",
+				name);
+
+		pr_info("%s: DMA window size is 0x%llx\n", name,
+			(u64)hose->dma_window_size);
+	}
 
 	iounmap(pci);
 }
@@ -176,19 +282,9 @@ static void __init setup_pci_cmd(struct pci_controller *hose)
 	}
 }
 
-static void __init setup_pci_pcsrbar(struct pci_controller *hose)
-{
-#ifdef CONFIG_PCI_MSI
-	phys_addr_t immr_base;
-
-	immr_base = get_immrbase();
-	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
-#endif
-}
-
 void fsl_pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	int i;
 
 	if ((bus->parent == hose->bus) &&
@@ -269,8 +365,6 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	/* Setup PEX window registers */
 	setup_pci_atmu(hose, &rsrc);
 
-	/* Setup PEXCSRBAR */
-	setup_pci_pcsrbar(hose);
 	return 0;
 }
 
@@ -281,6 +375,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
@@ -296,6 +392,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
 #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
@@ -324,7 +422,7 @@ struct mpc83xx_pcie_priv {
 
 static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -350,7 +448,7 @@ static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
 static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
 					    unsigned int devfn, int offset)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct mpc83xx_pcie_priv *pcie = hose->dn->data;
 	u8 bus_no = bus->number - hose->first_busno;
 	u32 dev_base = bus_no << 24 | devfn << 16;
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 13f30c2a61e..a9d8bbebed8 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -16,7 +16,11 @@
 
 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
 #define PCIE_LTSSM_L0	0x16		/* L0 state */
-#define PIWAR_2G	0xa0f5501e	/* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+#define PIWAR_EN		0x80000000	/* Enable */
+#define PIWAR_PF		0x20000000	/* prefetch */
+#define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
+#define PIWAR_READ_SNOOP	0x00050000
+#define PIWAR_WRITE_SNOOP	0x00005000
 
 /* PCI/PCI Express outbound window reg */
 struct pci_outbound_window_regs {
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index abdb124e1e2..39db9d1155d 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1026,8 +1026,7 @@ int fsl_rio_setup(struct of_device *dev)
 		return -EFAULT;
 	}
 	dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
-	dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n",	regs.start,
-						regs.end - regs.start + 1);
+	dev_info(&dev->dev, "Regs: %pR\n", &regs);
 
 	dt_range = of_get_property(dev->node, "ranges", &rlen);
 	if (!dt_range) {
@@ -1077,8 +1076,9 @@ int fsl_rio_setup(struct of_device *dev)
 
 	INIT_LIST_HEAD(&port->dbells);
 	port->iores.start = law_start;
-	port->iores.end = law_start + law_size;
+	port->iores.end = law_start + law_size - 1;
 	port->iores.flags = IORESOURCE_MEM;
+	port->iores.name = "rio_io_win";
 
 	priv->bellirq = irq_of_parse_and_map(dev->node, 2);
 	priv->txirq = irq_of_parse_and_map(dev->node, 3);
@@ -1156,14 +1156,15 @@ int fsl_rio_setup(struct of_device *dev)
 		out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
 
 	/* Configure maintenance transaction window */
-	out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
-	out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);
+	out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
+	out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);	/* 4M */
 
 	priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
 
 	/* Configure outbound doorbell window */
-	out_be32(&priv->dbell_atmu_regs->rowbar, 0x000c0400);
-	out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
+	out_be32(&priv->dbell_atmu_regs->rowbar,
+			(law_start + RIO_MAINT_WIN_SIZE) >> 12);
+	out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);	/* 4k */
 	fsl_rio_doorbell_init(port);
 
 	return 0;
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 5c64ccd402e..95dbc643c4f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -379,16 +379,10 @@ static int __init setup_rstcr(void)
 	struct device_node *np;
 	np = of_find_node_by_name(NULL, "global-utilities");
 	if ((np && of_get_property(np, "fsl,has-rstcr", NULL))) {
-		const u32 *prop = of_get_property(np, "reg", NULL);
-		if (prop) {
-			/* map reset control register
-			 * 0xE00B0 is offset of reset control register
-			 */
-			rstcr = ioremap(get_immrbase() + *prop + 0xB0, 0xff);
-			if (!rstcr)
-				printk (KERN_EMERG "Error: reset control "
-						"register not mapped!\n");
-		}
+		rstcr = of_iomap(np, 0) + 0xb0;
+		if (!rstcr)
+			printk (KERN_EMERG "Error: reset control register "
+					"not mapped!\n");
 	} else
 		printk (KERN_INFO "rstcr compatible register does not exist!\n");
 	if (np)
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 7fd49c97501..7ed80967664 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -24,7 +24,7 @@ static int
 indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		     int len, u32 *val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
 	u32 bus_no, reg;
@@ -82,7 +82,7 @@ static int
 indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 		      int len, u32 val)
 {
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
 	u32 bus_no, reg;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 352d8c3ef52..9c3af504549 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -613,23 +613,23 @@ static int irq_choose_cpu(unsigned int virt_irq)
 #define mpic_irq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
 
 /* Find an mpic associated with a given linux interrupt */
-static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi)
+static struct mpic *mpic_find(unsigned int irq)
 {
-	unsigned int src = mpic_irq_to_hw(irq);
-	struct mpic *mpic;
-
 	if (irq < NUM_ISA_INTERRUPTS)
 		return NULL;
 
-	mpic = irq_desc[irq].chip_data;
+	return irq_desc[irq].chip_data;
+}
 
-	if (is_ipi)
-		*is_ipi = (src >= mpic->ipi_vecs[0] &&
-			   src <= mpic->ipi_vecs[3]);
+/* Determine if the linux irq is an IPI */
+static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
+{
+	unsigned int src = mpic_irq_to_hw(irq);
 
-	return mpic;
+	return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
 }
 
+
 /* Convert a cpu mask from logical to physical cpu numbers. */
 static inline u32 mpic_physmask(u32 cpumask)
 {
@@ -1383,8 +1383,7 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable)
 
 void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 {
-	unsigned int is_ipi;
-	struct mpic *mpic = mpic_find(irq, &is_ipi);
+	struct mpic *mpic = mpic_find(irq);
 	unsigned int src = mpic_irq_to_hw(irq);
 	unsigned long flags;
 	u32 reg;
@@ -1393,7 +1392,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 		return;
 
 	spin_lock_irqsave(&mpic_lock, flags);
-	if (is_ipi) {
+	if (mpic_is_ipi(mpic, irq)) {
 		reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_ipi_write(src - mpic->ipi_vecs[0],
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 6a2d473c345..daefc93ddff 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1295,7 +1295,7 @@ static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port
 static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
 				    int offset, int len, u32 *val)
 {
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct ppc4xx_pciex_port *port =
 		&ppc4xx_pciex_ports[hose->indirect_type];
 	void __iomem *addr;
@@ -1352,7 +1352,7 @@ static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
 static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
 				     int offset, int len, u32 val)
 {
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct ppc4xx_pciex_port *port =
 		&ppc4xx_pciex_ports[hose->indirect_type];
 	void __iomem *addr;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 01bce3784b0..b28b0e512d6 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -61,6 +61,7 @@ struct qe_immap __iomem *qe_immr;
 EXPORT_SYMBOL(qe_immr);
 
 static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
+static unsigned int qe_num_of_snum;
 
 static phys_addr_t qebase = -1;
 
@@ -264,10 +265,14 @@ static void qe_snums_init(void)
 		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
 		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
 		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9,
+		0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
+		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
+		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
 	};
 
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	qe_num_of_snum = qe_get_num_of_snums();
+
+	for (i = 0; i < qe_num_of_snum; i++) {
 		snums[i].num = snum_init[i];
 		snums[i].state = QE_SNUM_STATE_FREE;
 	}
@@ -280,7 +285,7 @@ int qe_get_snum(void)
 	int i;
 
 	spin_lock_irqsave(&qe_lock, flags);
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	for (i = 0; i < qe_num_of_snum; i++) {
 		if (snums[i].state == QE_SNUM_STATE_FREE) {
 			snums[i].state = QE_SNUM_STATE_USED;
 			snum = snums[i].num;
@@ -297,7 +302,7 @@ void qe_put_snum(u8 snum)
 {
 	int i;
 
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	for (i = 0; i < qe_num_of_snum; i++) {
 		if (snums[i].num == snum) {
 			snums[i].state = QE_SNUM_STATE_FREE;
 			break;
@@ -575,3 +580,65 @@ struct qe_firmware_info *qe_get_firmware_info(void)
 }
 EXPORT_SYMBOL(qe_get_firmware_info);
 
+unsigned int qe_get_num_of_risc(void)
+{
+	struct device_node *qe;
+	int size;
+	unsigned int num_of_risc = 0;
+	const u32 *prop;
+
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		/* Older devices trees did not have an "fsl,qe"
+		 * compatible property, so we need to look for
+		 * the QE node by name.
+		 */
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return num_of_risc;
+	}
+
+	prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
+	if (prop && size == sizeof(*prop))
+		num_of_risc = *prop;
+
+	of_node_put(qe);
+
+	return num_of_risc;
+}
+EXPORT_SYMBOL(qe_get_num_of_risc);
+
+unsigned int qe_get_num_of_snums(void)
+{
+	struct device_node *qe;
+	int size;
+	unsigned int num_of_snums;
+	const u32 *prop;
+
+	num_of_snums = 28; /* The default number of snum for threads is 28 */
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		/* Older devices trees did not have an "fsl,qe"
+		 * compatible property, so we need to look for
+		 * the QE node by name.
+		 */
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return num_of_snums;
+	}
+
+	prop = of_get_property(qe, "fsl,qe-num-snums", &size);
+	if (prop && size == sizeof(*prop)) {
+		num_of_snums = *prop;
+		if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
+			/* No QE ever has fewer than 28 SNUMs */
+			pr_err("QE: number of snum is invalid\n");
+			return -EINVAL;
+		}
+	}
+
+	of_node_put(qe);
+
+	return num_of_snums;
+}
+EXPORT_SYMBOL(qe_get_num_of_snums);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 24e1f5a197a..cf244a419e9 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -63,7 +63,7 @@ tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
 			   int offset, int len, u32 val)
 {
 	volatile unsigned char *cfg_addr;
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 
 	if (ppc_md.pci_exclude_device)
 		if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
@@ -149,7 +149,7 @@ tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			  int len, u32 * val)
 {
 	volatile unsigned char *cfg_addr;
-	struct pci_controller *hose = bus->sysdata;
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	u32 temp;
 
 	if (ppc_md.pci_exclude_device)
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index c658b413c9b..3ee1fd37bbf 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -25,6 +25,7 @@
 #include <linux/of.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/i8259.h>
 #include <asm/irq.h>
 
 /*
@@ -191,20 +192,14 @@ struct irq_host * __init
 xilinx_intc_init(struct device_node *np)
 {
 	struct irq_host * irq;
-	struct resource res;
 	void * regs;
-	int rc;
 
 	/* Find and map the intc registers */
-	rc = of_address_to_resource(np, 0, &res);
-	if (rc) {
-		printk(KERN_ERR __FILE__ ": of_address_to_resource() failed\n");
+	regs = of_iomap(np, 0);
+	if (!regs) {
+		pr_err("xilinx_intc: could not map registers\n");
 		return NULL;
 	}
-	regs = ioremap(res.start, 32);
-
-	printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
-		(unsigned long long) res.start, regs);
 
 	/* Setup interrupt controller */
 	out_be32(regs + XINTC_IER, 0); /* disable all irqs */
@@ -217,6 +212,7 @@ xilinx_intc_init(struct device_node *np)
 	if (!irq)
 		panic(__FILE__ ": Cannot allocate IRQ host\n");
 	irq->host_data = regs;
+
 	return irq;
 }
 
@@ -227,23 +223,70 @@ int xilinx_intc_get_irq(void)
 	return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR));
 }
 
+#if defined(CONFIG_PPC_I8259)
+/*
+ * Support code for cascading to 8259 interrupt controllers
+ */
+static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq = i8259_irq();
+	if (cascade_irq)
+		generic_handle_irq(cascade_irq);
+
+	/* Let xilinx_intc end the interrupt */
+	desc->chip->ack(irq);
+	desc->chip->unmask(irq);
+}
+
+static void __init xilinx_i8259_setup_cascade(void)
+{
+	struct device_node *cascade_node;
+	int cascade_irq;
+
+	/* Initialize i8259 controller */
+	cascade_node = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (!cascade_node)
+		return;
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (!cascade_irq) {
+		pr_err("virtex_ml510: Failed to map cascade interrupt\n");
+		goto out;
+	}
+
+	i8259_init(cascade_node, 0);
+	set_irq_chained_handler(cascade_irq, xilinx_i8259_cascade);
+
+	/* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
+	/* This looks like a dirty hack to me --gcl */
+	outb(0xc0, 0x4d0);
+	outb(0xc0, 0x4d1);
+
+ out:
+	of_node_put(cascade_node);
+}
+#else
+static inline void xilinx_i8259_setup_cascade(void) { return; }
+#endif /* defined(CONFIG_PPC_I8259) */
+
+static struct of_device_id xilinx_intc_match[] __initconst = {
+	{ .compatible = "xlnx,opb-intc-1.00.c", },
+	{ .compatible = "xlnx,xps-intc-1.00.a", },
+	{}
+};
+
+/*
+ * Initialize master Xilinx interrupt controller
+ */
 void __init xilinx_intc_init_tree(void)
 {
 	struct device_node *np;
 
 	/* find top level interrupt controller */
-	for_each_compatible_node(np, NULL, "xlnx,opb-intc-1.00.c") {
+	for_each_matching_node(np, xilinx_intc_match) {
 		if (!of_get_property(np, "interrupts", NULL))
 			break;
 	}
-	if (!np) {
-		for_each_compatible_node(np, NULL, "xlnx,xps-intc-1.00.a") {
-			if (!of_get_property(np, "interrupts", NULL))
-				break;
-		}
-	}
-
-	/* xilinx interrupt controller needs to be top level */
 	BUG_ON(!np);
 
 	master_irqhost = xilinx_intc_init(np);
@@ -251,4 +294,6 @@ void __init xilinx_intc_init_tree(void)
 
 	irq_set_default_host(master_irqhost);
 	of_node_put(np);
+
+	xilinx_i8259_setup_cascade();
 }
diff --git a/arch/powerpc/sysdev/xilinx_pci.c b/arch/powerpc/sysdev/xilinx_pci.c
new file mode 100644
index 00000000000..1453b0eed22
--- /dev/null
+++ b/arch/powerpc/sysdev/xilinx_pci.c
@@ -0,0 +1,132 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <mm/mmu_decl.h>
+#include <asm/io.h>
+#include <asm/xilinx_pci.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS  0x114
+
+#define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+
+static struct of_device_id xilinx_pci_match[] = {
+	{ .compatible = "xlnx,plbv46-pci-1.03.a", },
+	{}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	int i;
+
+	if (dev->devfn || dev->bus->self)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (!hose)
+		return;
+
+	if (!of_match_node(xilinx_pci_match, hose->dn))
+		return;
+
+	/* Hide the PCI host BARs from the kernel as their content doesn't
+	 * fit well in the resource management
+	 */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+		 pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack.  Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+	return (bus != 0);
+}
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+	struct pci_controller *hose;
+	struct resource r;
+	void __iomem *pci_reg;
+	struct device_node *pci_node;
+
+	pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+	if(!pci_node)
+		return;
+
+	if (of_address_to_resource(pci_node, 0, &r)) {
+		pr_err("xilinx-pci: cannot resolve base address\n");
+		return;
+	}
+
+	hose = pcibios_alloc_controller(pci_node);
+	if (!hose) {
+		pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+		return;
+	}
+
+	/* Setup config space */
+	setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+			   r.start + XPLB_PCI_DATA,
+			   PPC_INDIRECT_TYPE_SET_CFG_TYPE);
+
+	/* According to the xilinx plbv46_pci documentation the soft-core starts
+	 * a self-init when the bus master enable bit is set. Without this bit
+	 * set the pci bus can't be scanned.
+	 */
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+	/* Set the max latency timer to 255 */
+	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+	/* Set the max bus number to 255 */
+	pci_reg = of_iomap(pci_node, 0);
+	out_8(pci_reg + XPLB_PCI_BUS, 0xff);
+	iounmap(pci_reg);
+
+	/* Nothing past the root bridge is working right now.  By default
+	 * exclude config access to anything except bus 0 */
+	if (!ppc_md.pci_exclude_device)
+		ppc_md.pci_exclude_device = xilinx_pci_exclude_device;
+
+	/* Register the host bridge with the linux kernel! */
+	pci_process_bridge_OF_ranges(hose, pci_node, 1);
+
+	pr_info("xilinx-pci: Registered PCI host bridge\n");
+}
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 8dfad7d9a00..e1f33a81e5e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -110,6 +110,7 @@ static int bsesc(void);
 static void dump(void);
 static void prdump(unsigned long, long);
 static int ppc_inst_dump(unsigned long, long, int);
+static void dump_log_buf(void);
 static void backtrace(struct pt_regs *);
 static void excprint(struct pt_regs *);
 static void prregs(struct pt_regs *);
@@ -197,6 +198,7 @@ Commands:\n\
   di	dump instructions\n\
   df	dump float values\n\
   dd	dump double values\n\
+  dl    dump the kernel log buffer\n\
   dr	dump stream of raw bytes\n\
   e	print exception information\n\
   f	flush cache\n\
@@ -2009,6 +2011,8 @@ dump(void)
 			nidump = MAX_DUMP;
 		adrs += ppc_inst_dump(adrs, nidump, 1);
 		last_cmd = "di\n";
+	} else if (c == 'l') {
+		dump_log_buf();
 	} else if (c == 'r') {
 		scanhex(&ndump);
 		if (ndump == 0)
@@ -2122,6 +2126,49 @@ print_address(unsigned long addr)
 	xmon_print_symbol(addr, "\t# ", "");
 }
 
+void
+dump_log_buf(void)
+{
+        const unsigned long size = 128;
+        unsigned long end, addr;
+        unsigned char buf[size + 1];
+
+        addr = 0;
+        buf[size] = '\0';
+
+        if (setjmp(bus_error_jmp) != 0) {
+                printf("Unable to lookup symbol __log_buf!\n");
+                return;
+        }
+
+        catch_memory_errors = 1;
+        sync();
+        addr = kallsyms_lookup_name("__log_buf");
+
+        if (! addr)
+                printf("Symbol __log_buf not found!\n");
+        else {
+                end = addr + (1 << CONFIG_LOG_BUF_SHIFT);
+                while (addr < end) {
+                        if (! mread(addr, buf, size)) {
+                                printf("Can't read memory at address 0x%lx\n", addr);
+                                break;
+                        }
+
+                        printf("%s", buf);
+
+                        if (strlen(buf) < size)
+                                break;
+
+                        addr += size;
+                }
+        }
+
+        sync();
+        /* wait a little while to see if we get a machine check */
+        __delay(200);
+        catch_memory_errors = 0;
+}
 
 /*
  * Memory operations - move, set, print differences
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 99dc3ded6b4..a14dba0e4d6 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -348,6 +348,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 config ARCH_ENABLE_MEMORY_HOTREMOVE
 	def_bool y
 
+config ARCH_HIBERNATION_POSSIBLE
+       def_bool y if 64BIT
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
@@ -592,6 +595,12 @@ config SECCOMP
 
 endmenu
 
+menu "Power Management"
+
+source "kernel/power/Kconfig"
+
+endmenu
+
 source "net/Kconfig"
 
 config PCMCIA
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 578c61f15a4..0ff387cebf8 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -88,7 +88,9 @@ LDFLAGS_vmlinux := -e start
 head-y		:= arch/s390/kernel/head.o arch/s390/kernel/init_task.o
 
 core-y		+= arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
-		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/
+		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/ \
+		   arch/s390/power/
+
 libs-y		+= arch/s390/lib/
 drivers-y	+= drivers/s390/
 drivers-$(CONFIG_MATHEMU) += arch/s390/math-emu/
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 1dfc7100c7e..264528e4f58 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -5,7 +5,7 @@
  * Exports appldata_register_ops() and appldata_unregister_ops() for the
  * data gathering modules.
  *
- * Copyright IBM Corp. 2003, 2008
+ * Copyright IBM Corp. 2003, 2009
  *
  * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
@@ -26,6 +26,8 @@
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/workqueue.h>
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
 #include <asm/appldata.h>
 #include <asm/timer.h>
 #include <asm/uaccess.h>
@@ -41,6 +43,9 @@
 
 #define TOD_MICRO	0x01000			/* nr. of TOD clock units
 						   for 1 microsecond */
+
+static struct platform_device *appldata_pdev;
+
 /*
  * /proc entries (sysctl)
  */
@@ -86,6 +91,7 @@ static atomic_t appldata_expire_count = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(appldata_timer_lock);
 static int appldata_interval = APPLDATA_CPU_INTERVAL;
 static int appldata_timer_active;
+static int appldata_timer_suspended = 0;
 
 /*
  * Work queue
@@ -475,6 +481,93 @@ void appldata_unregister_ops(struct appldata_ops *ops)
 /********************** module-ops management <END> **************************/
 
 
+/**************************** suspend / resume *******************************/
+static int appldata_freeze(struct device *dev)
+{
+	struct appldata_ops *ops;
+	int rc;
+	struct list_head *lh;
+
+	get_online_cpus();
+	spin_lock(&appldata_timer_lock);
+	if (appldata_timer_active) {
+		__appldata_vtimer_setup(APPLDATA_DEL_TIMER);
+		appldata_timer_suspended = 1;
+	}
+	spin_unlock(&appldata_timer_lock);
+	put_online_cpus();
+
+	mutex_lock(&appldata_ops_mutex);
+	list_for_each(lh, &appldata_ops_list) {
+		ops = list_entry(lh, struct appldata_ops, list);
+		if (ops->active == 1) {
+			rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
+					(unsigned long) ops->data, ops->size,
+					ops->mod_lvl);
+			if (rc != 0)
+				pr_err("Stopping the data collection for %s "
+				       "failed with rc=%d\n", ops->name, rc);
+		}
+	}
+	mutex_unlock(&appldata_ops_mutex);
+	return 0;
+}
+
+static int appldata_restore(struct device *dev)
+{
+	struct appldata_ops *ops;
+	int rc;
+	struct list_head *lh;
+
+	get_online_cpus();
+	spin_lock(&appldata_timer_lock);
+	if (appldata_timer_suspended) {
+		__appldata_vtimer_setup(APPLDATA_ADD_TIMER);
+		appldata_timer_suspended = 0;
+	}
+	spin_unlock(&appldata_timer_lock);
+	put_online_cpus();
+
+	mutex_lock(&appldata_ops_mutex);
+	list_for_each(lh, &appldata_ops_list) {
+		ops = list_entry(lh, struct appldata_ops, list);
+		if (ops->active == 1) {
+			ops->callback(ops->data);	// init record
+			rc = appldata_diag(ops->record_nr,
+					APPLDATA_START_INTERVAL_REC,
+					(unsigned long) ops->data, ops->size,
+					ops->mod_lvl);
+			if (rc != 0) {
+				pr_err("Starting the data collection for %s "
+				       "failed with rc=%d\n", ops->name, rc);
+			}
+		}
+	}
+	mutex_unlock(&appldata_ops_mutex);
+	return 0;
+}
+
+static int appldata_thaw(struct device *dev)
+{
+	return appldata_restore(dev);
+}
+
+static struct dev_pm_ops appldata_pm_ops = {
+	.freeze		= appldata_freeze,
+	.thaw		= appldata_thaw,
+	.restore	= appldata_restore,
+};
+
+static struct platform_driver appldata_pdrv = {
+	.driver = {
+		.name	= "appldata",
+		.owner	= THIS_MODULE,
+		.pm	= &appldata_pm_ops,
+	},
+};
+/************************* suspend / resume <END> ****************************/
+
+
 /******************************* init / exit *********************************/
 
 static void __cpuinit appldata_online_cpu(int cpu)
@@ -531,11 +624,23 @@ static struct notifier_block __cpuinitdata appldata_nb = {
  */
 static int __init appldata_init(void)
 {
-	int i;
+	int i, rc;
+
+	rc = platform_driver_register(&appldata_pdrv);
+	if (rc)
+		return rc;
 
+	appldata_pdev = platform_device_register_simple("appldata", -1, NULL,
+							0);
+	if (IS_ERR(appldata_pdev)) {
+		rc = PTR_ERR(appldata_pdev);
+		goto out_driver;
+	}
 	appldata_wq = create_singlethread_workqueue("appldata");
-	if (!appldata_wq)
-		return -ENOMEM;
+	if (!appldata_wq) {
+		rc = -ENOMEM;
+		goto out_device;
+	}
 
 	get_online_cpus();
 	for_each_online_cpu(i)
@@ -547,6 +652,12 @@ static int __init appldata_init(void)
 
 	appldata_sysctl_header = register_sysctl_table(appldata_dir_table);
 	return 0;
+
+out_device:
+	platform_device_unregister(appldata_pdev);
+out_driver:
+	platform_driver_unregister(&appldata_pdrv);
+	return rc;
 }
 
 __initcall(appldata_init);
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index ba007d8df94..2a541955117 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -1,11 +1,9 @@
 /*
- *  include/asm-s390/ccwdev.h
- *  include/asm-s390x/ccwdev.h
+ * Copyright  IBM Corp. 2002, 2009
  *
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Arnd Bergmann <arndb@de.ibm.com>
+ * Author(s): Arnd Bergmann <arndb@de.ibm.com>
  *
- *  Interface for CCW device drivers
+ * Interface for CCW device drivers
  */
 #ifndef _S390_CCWDEV_H_
 #define _S390_CCWDEV_H_
@@ -104,6 +102,11 @@ struct ccw_device {
  * @set_offline: called when setting device offline
  * @notify: notify driver of device state changes
  * @shutdown: called at device shutdown
+ * @prepare: prepare for pm state transition
+ * @complete: undo work done in @prepare
+ * @freeze: callback for freezing during hibernation snapshotting
+ * @thaw: undo work done in @freeze
+ * @restore: callback for restoring after hibernation
  * @driver: embedded device driver structure
  * @name: device driver name
  */
@@ -116,6 +119,11 @@ struct ccw_driver {
 	int (*set_offline) (struct ccw_device *);
 	int (*notify) (struct ccw_device *, int);
 	void (*shutdown) (struct ccw_device *);
+	int (*prepare) (struct ccw_device *);
+	void (*complete) (struct ccw_device *);
+	int (*freeze)(struct ccw_device *);
+	int (*thaw) (struct ccw_device *);
+	int (*restore)(struct ccw_device *);
 	struct device_driver driver;
 	char *name;
 };
@@ -184,6 +192,7 @@ extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
 #define to_ccwdrv(n) container_of(n, struct ccw_driver, driver)
 
 extern struct ccw_device *ccw_device_probe_console(void);
+extern int ccw_device_force_console(void);
 
 // FIXME: these have to go
 extern int _ccw_device_get_subchannel_number(struct ccw_device *);
diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h
index a27f68985a7..c79c1e787b8 100644
--- a/arch/s390/include/asm/ccwgroup.h
+++ b/arch/s390/include/asm/ccwgroup.h
@@ -38,6 +38,11 @@ struct ccwgroup_device {
  * @set_online: function called when device is set online
  * @set_offline: function called when device is set offline
  * @shutdown: function called when device is shut down
+ * @prepare: prepare for pm state transition
+ * @complete: undo work done in @prepare
+ * @freeze: callback for freezing during hibernation snapshotting
+ * @thaw: undo work done in @freeze
+ * @restore: callback for restoring after hibernation
  * @driver: embedded driver structure
  */
 struct ccwgroup_driver {
@@ -51,6 +56,11 @@ struct ccwgroup_driver {
 	int (*set_online) (struct ccwgroup_device *);
 	int (*set_offline) (struct ccwgroup_device *);
 	void (*shutdown)(struct ccwgroup_device *);
+	int (*prepare) (struct ccwgroup_device *);
+	void (*complete) (struct ccwgroup_device *);
+	int (*freeze)(struct ccwgroup_device *);
+	int (*thaw) (struct ccwgroup_device *);
+	int (*restore)(struct ccwgroup_device *);
 
 	struct device_driver driver;
 };
diff --git a/arch/s390/include/asm/kmap_types.h b/arch/s390/include/asm/kmap_types.h
index fd157464822..94ec3ee0798 100644
--- a/arch/s390/include/asm/kmap_types.h
+++ b/arch/s390/include/asm/kmap_types.h
@@ -2,22 +2,7 @@
 #ifndef _ASM_KMAP_TYPES_H
 #define _ASM_KMAP_TYPES_H
 
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,	
-	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
 #endif
 #endif /* __KERNEL__ */
diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h
new file mode 100644
index 00000000000..dc75c616eaf
--- /dev/null
+++ b/arch/s390/include/asm/suspend.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_S390_SUSPEND_H
+#define __ASM_S390_SUSPEND_H
+
+static inline int arch_prepare_suspend(void)
+{
+	return 0;
+}
+
+#endif
+
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 3a8b26eb1f2..4fb83c1cdb7 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -1,11 +1,7 @@
 /*
- *  include/asm-s390/system.h
+ * Copyright IBM Corp. 1999, 2009
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *
- *  Derived from "include/asm-i386/system.h"
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #ifndef __ASM_SYSTEM_H
@@ -469,6 +465,20 @@ extern psw_t sysc_restore_trace_psw;
 extern psw_t io_restore_trace_psw;
 #endif
 
+static inline int tprot(unsigned long addr)
+{
+	int rc = -EFAULT;
+
+	asm volatile(
+		"	tprot	0(%1),0\n"
+		"0:	ipm	%0\n"
+		"	srl	%0,28\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "a" (addr) : "cc");
+	return rc;
+}
+
 #endif /* __KERNEL__ */
 
 #endif
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index fb263736826..f9b144049dc 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -1,7 +1,7 @@
 /*
  *  arch/s390/kernel/early.c
  *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007, 2009
  *    Author(s): Hongjie Yang <hongjie@us.ibm.com>,
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  */
@@ -210,7 +210,7 @@ static noinline __init void detect_machine_type(void)
 		machine_flags |= MACHINE_FLAG_VM;
 }
 
-static __init void early_pgm_check_handler(void)
+static void early_pgm_check_handler(void)
 {
 	unsigned long addr;
 	const struct exception_table_entry *fixup;
@@ -222,7 +222,7 @@ static __init void early_pgm_check_handler(void)
 	S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
 }
 
-static noinline __init void setup_lowcore_early(void)
+void setup_lowcore_early(void)
 {
 	psw_t psw;
 
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 6d227413cbe..ec688234852 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -62,7 +62,7 @@ __HEAD
 	.org   0x100
 #
 # subroutine for loading from tape
-# Paramters:
+# Parameters:
 #  R1 = device number
 #  R2 = load address
 .Lloader:
diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c
index 7db95c0b869..fe787f9e5f3 100644
--- a/arch/s390/kernel/init_task.c
+++ b/arch/s390/kernel/init_task.c
@@ -18,10 +18,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 9872999c66d..559af0d0787 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -1,6 +1,7 @@
 /*
- *    Copyright IBM Corp. 2008
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ * Copyright IBM Corp. 2008, 2009
+ *
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
  */
 
 #include <linux/kernel.h>
@@ -9,20 +10,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-static inline int tprot(unsigned long addr)
-{
-	int rc = -EFAULT;
-
-	asm volatile(
-		"	tprot	0(%1),0\n"
-		"0:	ipm	%0\n"
-		"	srl	%0,28\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc) : "a" (addr) : "cc");
-	return rc;
-}
-
 #define ADDR2G (1ULL << 31)
 
 static void find_memory_chunks(struct mem_chunk chunk[])
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index cc8c484984e..fd8e3111a4e 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1,7 +1,7 @@
 /*
  *  arch/s390/kernel/smp.c
  *
- *    Copyright IBM Corp. 1999,2007
+ *    Copyright IBM Corp. 1999, 2009
  *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
  *		 Martin Schwidefsky (schwidefsky@de.ibm.com)
  *		 Heiko Carstens (heiko.carstens@de.ibm.com)
@@ -1031,6 +1031,42 @@ out:
 static SYSDEV_CLASS_ATTR(dispatching, 0644, dispatching_show,
 			 dispatching_store);
 
+/*
+ * If the resume kernel runs on another cpu than the suspended kernel,
+ * we have to switch the cpu IDs in the logical map.
+ */
+void smp_switch_boot_cpu_in_resume(u32 resume_phys_cpu_id,
+				   struct _lowcore *suspend_lowcore)
+{
+	int cpu, suspend_cpu_id, resume_cpu_id;
+	u32 suspend_phys_cpu_id;
+
+	suspend_phys_cpu_id = __cpu_logical_map[suspend_lowcore->cpu_nr];
+	suspend_cpu_id = suspend_lowcore->cpu_nr;
+
+	for_each_present_cpu(cpu) {
+		if (__cpu_logical_map[cpu] == resume_phys_cpu_id) {
+			resume_cpu_id = cpu;
+			goto found;
+		}
+	}
+	panic("Could not find resume cpu in logical map.\n");
+
+found:
+	printk("Resume  cpu ID: %i/%i\n", resume_phys_cpu_id, resume_cpu_id);
+	printk("Suspend cpu ID: %i/%i\n", suspend_phys_cpu_id, suspend_cpu_id);
+
+	__cpu_logical_map[resume_cpu_id] = suspend_phys_cpu_id;
+	__cpu_logical_map[suspend_cpu_id] = resume_phys_cpu_id;
+
+	lowcore_ptr[suspend_cpu_id]->cpu_addr = resume_phys_cpu_id;
+}
+
+u32 smp_get_phys_cpu_id(void)
+{
+	return __cpu_logical_map[smp_processor_id()];
+}
+
 static int __init topology_init(void)
 {
 	int cpu;
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 4ca8e826bf3..56566720798 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -313,3 +313,22 @@ int s390_enable_sie(void)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(s390_enable_sie);
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+#ifdef CONFIG_HIBERNATION
+bool kernel_page_present(struct page *page)
+{
+	unsigned long addr;
+	int cc;
+
+	addr = page_to_phys(page);
+	asm("lra %1,0(%1)\n"
+	    "ipm %0\n"
+	    "srl %0,28"
+	    :"=d"(cc),"+a"(addr)::"cc");
+	return cc == 0;
+}
+
+#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_DEBUG_PAGEALLOC */
+
diff --git a/arch/s390/power/Makefile b/arch/s390/power/Makefile
new file mode 100644
index 00000000000..973bb45a8fe
--- /dev/null
+++ b/arch/s390/power/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for s390 PM support
+#
+
+obj-$(CONFIG_HIBERNATION) += suspend.o
+obj-$(CONFIG_HIBERNATION) += swsusp.o
+obj-$(CONFIG_HIBERNATION) += swsusp_64.o
+obj-$(CONFIG_HIBERNATION) += swsusp_asm64.o
diff --git a/arch/s390/power/suspend.c b/arch/s390/power/suspend.c
new file mode 100644
index 00000000000..b3351eceebb
--- /dev/null
+++ b/arch/s390/power/suspend.c
@@ -0,0 +1,40 @@
+/*
+ * Suspend support specific for s390.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/suspend.h>
+#include <linux/reboot.h>
+#include <linux/pfn.h>
+#include <asm/sections.h>
+#include <asm/ipl.h>
+
+/*
+ * References to section boundaries
+ */
+extern const void __nosave_begin, __nosave_end;
+
+/*
+ *  check if given pfn is in the 'nosave' or in the read only NSS section
+ */
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
+					>> PAGE_SHIFT;
+	unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
+	unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
+
+	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
+		return 1;
+	if (pfn >= stext_pfn && pfn <= eshared_pfn) {
+		if (ipl_info.type == IPL_TYPE_NSS)
+			return 1;
+	} else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
+		return 1;
+	return 0;
+}
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
new file mode 100644
index 00000000000..e6a4fe9f5f2
--- /dev/null
+++ b/arch/s390/power/swsusp.c
@@ -0,0 +1,30 @@
+/*
+ * Support for suspend and resume on s390
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *
+ */
+
+
+/*
+ * save CPU registers before creating a hibernation image and before
+ * restoring the memory state from it
+ */
+void save_processor_state(void)
+{
+	/* implentation contained in the
+	 * swsusp_arch_suspend function
+	 */
+}
+
+/*
+ * restore the contents of CPU registers
+ */
+void restore_processor_state(void)
+{
+	/* implentation contained in the
+	 * swsusp_arch_resume function
+	 */
+}
diff --git a/arch/s390/power/swsusp_64.c b/arch/s390/power/swsusp_64.c
new file mode 100644
index 00000000000..9516a517d72
--- /dev/null
+++ b/arch/s390/power/swsusp_64.c
@@ -0,0 +1,17 @@
+/*
+ * Support for suspend and resume on s390
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *
+ */
+
+#include <asm/system.h>
+#include <linux/interrupt.h>
+
+void do_after_copyback(void)
+{
+	mb();
+}
+
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
new file mode 100644
index 00000000000..3c74e7d827c
--- /dev/null
+++ b/arch/s390/power/swsusp_asm64.S
@@ -0,0 +1,199 @@
+/*
+ * S390 64-bit swsusp implementation
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *	      Michael Holzheu <holzheu@linux.vnet.ibm.com>
+ */
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Save register context in absolute 0 lowcore and call swsusp_save() to
+ * create in-memory kernel image. The context is saved in the designated
+ * "store status" memory locations (see POP).
+ * We return from this function twice. The first time during the suspend to
+ * disk process. The second time via the swsusp_arch_resume() function
+ * (see below) in the resume process.
+ * This function runs with disabled interrupts.
+ */
+	.section .text
+	.align	2
+	.globl swsusp_arch_suspend
+swsusp_arch_suspend:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+
+	/* Deactivate DAT */
+	stnsm	__SF_EMPTY(%r15),0xfb
+
+	/* Switch off lowcore protection */
+	stctg	%c0,%c0,__SF_EMPTY(%r15)
+	ni	__SF_EMPTY+4(%r15),0xef
+	lctlg	%c0,%c0,__SF_EMPTY(%r15)
+
+	/* Store prefix register on stack */
+	stpx	__SF_EMPTY(%r15)
+
+	/* Setup base register for lowcore (absolute 0) */
+	llgf	%r1,__SF_EMPTY(%r15)
+
+	/* Get pointer to save area */
+	aghi	%r1,0x1000
+
+	/* Store registers */
+	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
+	stfpc	0x31c(%r1)			/* store fpu control */
+	std	0,0x200(%r1)			/* store f0 */
+	std	1,0x208(%r1)			/* store f1 */
+	std	2,0x210(%r1)			/* store f2 */
+	std	3,0x218(%r1)			/* store f3 */
+	std	4,0x220(%r1)			/* store f4 */
+	std	5,0x228(%r1)			/* store f5 */
+	std	6,0x230(%r1)			/* store f6 */
+	std	7,0x238(%r1)			/* store f7 */
+	std	8,0x240(%r1)			/* store f8 */
+	std	9,0x248(%r1)			/* store f9 */
+	std	10,0x250(%r1)			/* store f10 */
+	std	11,0x258(%r1)			/* store f11 */
+	std	12,0x260(%r1)			/* store f12 */
+	std	13,0x268(%r1)			/* store f13 */
+	std	14,0x270(%r1)			/* store f14 */
+	std	15,0x278(%r1)			/* store f15 */
+	stam	%a0,%a15,0x340(%r1)		/* store access registers */
+	stctg	%c0,%c15,0x380(%r1)		/* store control registers */
+	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
+
+	stpt	0x328(%r1)			/* store timer */
+	stckc	0x330(%r1)			/* store clock comparator */
+
+	/* Activate DAT */
+	stosm	__SF_EMPTY(%r15),0x04
+
+	/* Set prefix page to zero */
+	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+	spx	__SF_EMPTY(%r15)
+
+	/* Setup lowcore */
+	brasl	%r14,setup_lowcore_early
+
+	/* Save image */
+	brasl	%r14,swsusp_save
+
+	/* Switch on lowcore protection */
+	stctg	%c0,%c0,__SF_EMPTY(%r15)
+	oi	__SF_EMPTY+4(%r15),0x10
+	lctlg	%c0,%c0,__SF_EMPTY(%r15)
+
+	/* Restore prefix register and return */
+	lghi	%r1,0x1000
+	spx	0x318(%r1)
+	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+	lghi	%r2,0
+	br	%r14
+
+/*
+ * Restore saved memory image to correct place and restore register context.
+ * Then we return to the function that called swsusp_arch_suspend().
+ * swsusp_arch_resume() runs with disabled interrupts.
+ */
+	.globl swsusp_arch_resume
+swsusp_arch_resume:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+
+	/* Save boot cpu number */
+	brasl	%r14,smp_get_phys_cpu_id
+	lgr	%r10,%r2
+
+	/* Deactivate DAT */
+	stnsm	__SF_EMPTY(%r15),0xfb
+
+	/* Switch off lowcore protection */
+	stctg	%c0,%c0,__SF_EMPTY(%r15)
+	ni	__SF_EMPTY+4(%r15),0xef
+	lctlg	%c0,%c0,__SF_EMPTY(%r15)
+
+	/* Set prefix page to zero */
+	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+	spx	__SF_EMPTY(%r15)
+
+	/* Restore saved image */
+	larl	%r1,restore_pblist
+	lg	%r1,0(%r1)
+	ltgr	%r1,%r1
+	jz	2f
+0:
+	lg	%r2,8(%r1)
+	lg	%r4,0(%r1)
+	lghi	%r3,PAGE_SIZE
+	lghi	%r5,PAGE_SIZE
+1:
+	mvcle	%r2,%r4,0
+	jo	1b
+	lg	%r1,16(%r1)
+	ltgr	%r1,%r1
+	jnz	0b
+2:
+	ptlb				/* flush tlb */
+
+	/* Restore registers */
+	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
+
+	spt	0x328(%r13)		/* reprogram timer */
+	//sckc	0x330(%r13)		/* set clock comparator */
+
+	lctlg	%c0,%c15,0x380(%r13)	/* load control registers */
+	lam	%a0,%a15,0x340(%r13)	/* load access registers */
+
+	lfpc	0x31c(%r13)		/* load fpu control */
+	ld	0,0x200(%r13)		/* load f0 */
+	ld	1,0x208(%r13)		/* load f1 */
+	ld	2,0x210(%r13)		/* load f2 */
+	ld	3,0x218(%r13)		/* load f3 */
+	ld	4,0x220(%r13)		/* load f4 */
+	ld	5,0x228(%r13)		/* load f5 */
+	ld	6,0x230(%r13)		/* load f6 */
+	ld	7,0x238(%r13)		/* load f7 */
+	ld	8,0x240(%r13)		/* load f8 */
+	ld	9,0x248(%r13)		/* load f9 */
+	ld	10,0x250(%r13)		/* load f10 */
+	ld	11,0x258(%r13)		/* load f11 */
+	ld	12,0x260(%r13)		/* load f12 */
+	ld	13,0x268(%r13)		/* load f13 */
+	ld	14,0x270(%r13)		/* load f14 */
+	ld	15,0x278(%r13)		/* load f15 */
+
+	/* Load old stack */
+	lg	%r15,0x2f8(%r13)
+
+	/* Pointer to save arae */
+	lghi	%r13,0x1000
+
+	/* Switch CPUs */
+	lgr	%r2,%r10		/* get cpu id */
+	llgf	%r3,0x318(%r13)
+	brasl	%r14,smp_switch_boot_cpu_in_resume
+
+	/* Restore prefix register */
+	spx	0x318(%r13)
+
+	/* Switch on lowcore protection */
+	stctg	%c0,%c0,__SF_EMPTY(%r15)
+	oi	__SF_EMPTY+4(%r15),0x10
+	lctlg	%c0,%c0,__SF_EMPTY(%r15)
+
+	/* Activate DAT */
+	stosm	__SF_EMPTY(%r15),0x04
+
+	/* Return 0 */
+	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+	lghi	%r2,0
+	br	%r14
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 739a12d2ffb..ac1c620d1c7 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -15,7 +15,9 @@ config SUPERH
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
+	select HAVE_PERF_COUNTER
 	select RTC_LIB
+	select GENERIC_ATOMIC64
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 1c4d83ef2a4..7ffd1b4315b 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -349,15 +349,6 @@ static int ov7725_power(struct device *dev, int mode)
 	return 0;
 }
 
-static struct ov772x_camera_info ov7725_info = {
-	.buswidth  = SOCAM_DATAWIDTH_8,
-	.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
-	.edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
-	.link = {
-		.power  = ov7725_power,
-	},
-};
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
 };
@@ -402,25 +393,48 @@ static struct platform_device sdcard_cn3_device = {
 	},
 };
 
-static struct platform_device *ap325rxa_devices[] __initdata = {
-	&smsc9118_device,
-	&ap325rxa_nor_flash_device,
-	&lcdc_device,
-	&ceu_device,
-	&nand_flash_device,
-	&sdcard_cn3_device,
-};
-
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
+};
+
+static struct i2c_board_info ap325rxa_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("ov772x", 0x21),
-		.platform_data = &ov7725_info,
 	},
 };
 
+static struct ov772x_camera_info ov7725_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),
+	.link = {
+		.power		= ov7725_power,
+		.board_info	= &ap325rxa_i2c_camera[0],
+		.i2c_adapter_id	= 0,
+		.module_name	= "ov772x",
+	},
+};
+
+static struct platform_device ap325rxa_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &ov7725_info.link,
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smsc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+	&nand_flash_device,
+	&sdcard_cn3_device,
+	&ap325rxa_camera,
+};
+
 static struct spi_board_info ap325rxa_spi_devices[] = {
 	{
 		.modalias = "mmc_spi",
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 7be56fb06c1..42410a15d25 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -15,16 +15,18 @@
 #include <linux/fb.h>
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
+#include <linux/usb/r8a66597.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <mach/sh7785lcr.h>
+#include <cpu/sh7785.h>
 #include <asm/heartbeat.h>
 #include <asm/clock.h>
-#include <cpu/sh7785.h>
 
 /*
  * NOTE: This board has 2 physical memory maps.
@@ -98,18 +100,21 @@ static struct platform_device nor_flash_device = {
 	.resource	= nor_flash_resources,
 };
 
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
 static struct resource r8a66597_usb_host_resources[] = {
 	[0] = {
-		.name	= "r8a66597_hcd",
 		.start	= R8A66597_ADDR,
 		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.name	= "r8a66597_hcd",
 		.start	= 2,
 		.end	= 2,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -119,6 +124,7 @@ static struct platform_device r8a66597_usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
 	.resource	= r8a66597_usb_host_resources,
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index dd297d87f93..1639f891500 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -20,6 +20,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/r8a66597.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
@@ -28,18 +30,21 @@
 #include <asm/io.h>
 #include <asm/io_trapped.h>
 
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
 static struct resource r8a66597_usb_host_resources[] = {
 	[0] = {
-		.name	= "r8a66597_hcd",
 		.start	= 0xA4200000,
 		.end	= 0xA42000FF,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.name	= "r8a66597_hcd",
 		.start	= IRQ_EXT1,		/* irq number */
 		.end	= IRQ_EXT1,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -49,6 +54,7 @@ static struct platform_device r8a66597_usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
 	.resource	= r8a66597_usb_host_resources,
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 6ed401cd315..f70f4644deb 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -381,21 +381,6 @@ static struct platform_device migor_ceu_device = {
 	},
 };
 
-static struct ov772x_camera_info ov7725_info = {
-	.buswidth  = SOCAM_DATAWIDTH_8,
-	.link = {
-		.power  = ov7725_power,
-	},
-};
-
-static struct tw9910_video_info tw9910_info = {
-	.buswidth = SOCAM_DATAWIDTH_8,
-	.mpout    = TW9910_MPO_FIELD,
-	.link = {
-		.power  = tw9910_power,
-	}
-};
-
 struct spi_gpio_platform_data sdcard_cn9_platform_data = {
 	.sck = GPIO_PTD0,
 	.mosi = GPIO_PTD1,
@@ -410,16 +395,6 @@ static struct platform_device sdcard_cn9_device = {
 	},
 };
 
-static struct platform_device *migor_devices[] __initdata = {
-	&smc91x_eth_device,
-	&sh_keysc_device,
-	&migor_lcdc_device,
-	&migor_ceu_device,
-	&migor_nor_flash_device,
-	&migor_nand_flash_device,
-	&sdcard_cn9_device,
-};
-
 static struct i2c_board_info migor_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -428,16 +403,66 @@ static struct i2c_board_info migor_i2c_devices[] = {
 		I2C_BOARD_INFO("migor_ts", 0x51),
 		.irq = 38, /* IRQ6 */
 	},
+};
+
+static struct i2c_board_info migor_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("ov772x", 0x21),
-		.platform_data = &ov7725_info,
 	},
 	{
 		I2C_BOARD_INFO("tw9910", 0x45),
-		.platform_data = &tw9910_info,
 	},
 };
 
+static struct ov772x_camera_info ov7725_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.link = {
+		.power		= ov7725_power,
+		.board_info	= &migor_i2c_camera[0],
+		.i2c_adapter_id	= 0,
+		.module_name	= "ov772x",
+	},
+};
+
+static struct tw9910_video_info tw9910_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.mpout		= TW9910_MPO_FIELD,
+	.link = {
+		.power		= tw9910_power,
+		.board_info	= &migor_i2c_camera[1],
+		.i2c_adapter_id	= 0,
+		.module_name	= "tw9910",
+	}
+};
+
+static struct platform_device migor_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &ov7725_info.link,
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &tw9910_info.link,
+		},
+	},
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+	&migor_nor_flash_device,
+	&migor_nand_flash_device,
+	&sdcard_cn9_device,
+	&migor_camera[0],
+	&migor_camera[1],
+};
+
 static struct spi_board_info migor_spi_devices[] = {
 	{
 		.modalias = "mmc_spi",
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index d8a65ea9166..4af3a771c05 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -26,13 +26,13 @@ static struct smsc911x_platform_config smsc911x_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_16BIT,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO,
 };
 
 static struct resource smsc911x_resources[] = {
 	[0] = {
 		.start		= 0x24000000,
-		.end		= 0x24000000 + 0x100,
+		.end		= 0x240000ff,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -99,6 +99,10 @@ static int __init rsk7203_devices_setup(void)
 	gpio_request(GPIO_FN_TXD0, NULL);
 	gpio_request(GPIO_FN_RXD0, NULL);
 
+	/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
+	ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */
+	gpio_request(GPIO_FN_IRQ0_PB, NULL);
+
 	return platform_add_devices(rsk7203_devices,
 				    ARRAY_SIZE(rsk7203_devices));
 }
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index a340492087f..8913ae39a80 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -15,6 +15,8 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/r8a66597.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
@@ -58,17 +60,20 @@ static struct platform_device smc91x_device = {
 	},
 };
 
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
 static struct resource r8a66597_usb_host_resources[] = {
 	[0] = {
-		.name	= "r8a66597_hcd",
 		.start	= 0x18040000,
 		.end	= 0x18080000 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.name	= "r8a66597_hcd",
 		/* Filled in by ilsel */
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -78,6 +83,7 @@ static struct platform_device r8a66597_usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
 	.resource	= r8a66597_usb_host_resources,
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index d2ffc477549..d6303d0e494 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= ops-sh7786.o
 obj-$(CONFIG_CPU_SH5)			+= pci-sh5.o ops-sh5.o
 
 obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
diff --git a/arch/sh/drivers/pci/ops-sh7786.c b/arch/sh/drivers/pci/ops-sh7786.c
new file mode 100644
index 00000000000..48f594b9582
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh7786.c
@@ -0,0 +1,134 @@
+/*
+ * Generic SH7786 PCI-Express operations.
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include "pcie-sh7786.h"
+
+enum {
+	PCI_ACCESS_READ,
+	PCI_ACCESS_WRITE,
+};
+
+static DEFINE_SPINLOCK(sh7786_pcie_lock);
+
+static int sh7786_pcie_config_access(unsigned char access_type,
+		struct pci_bus *bus, unsigned int devfn, int where, u32 *data)
+{
+	struct pci_channel *chan = bus->sysdata;
+	int dev, func;
+
+	dev = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+
+	if (bus->number > 255 || dev > 31 || func > 7)
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	if (devfn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* Set the PIO address */
+	pci_write_reg(chan, (bus->number << 24) | (dev << 19) |
+				(func << 16) | (where & ~3), SH4A_PCIEPAR);
+
+	/* Enable the configuration access */
+	pci_write_reg(chan, (1 << 31), SH4A_PCIEPCTLR);
+
+	if (access_type == PCI_ACCESS_READ)
+		*data = pci_read_reg(chan, SH4A_PCIEPDR);
+	else
+		pci_write_reg(chan, *data, SH4A_PCIEPDR);
+
+	/* Check for master and target aborts */
+	if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28)))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 *val)
+{
+	unsigned long flags;
+	int ret;
+	u32 data;
+
+        if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	spin_lock_irqsave(&sh7786_pcie_lock, flags);
+	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
+					devfn, where, &data);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		goto out;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 2) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x "
+		"where=0x%04x size=%d val=0x%08lx\n", bus->number,
+		devfn, where, size, (unsigned long)*val);
+
+out:
+	spin_unlock_irqrestore(&sh7786_pcie_lock, flags);
+	return ret;
+}
+
+static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 val)
+{
+	unsigned long flags;
+	int shift, ret;
+	u32 data;
+
+        if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	spin_lock_irqsave(&sh7786_pcie_lock, flags);
+	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
+					devfn, where, &data);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		goto out;
+
+	dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x "
+		"where=0x%04x size=%d val=%08lx\n", bus->number,
+		devfn, where, size, (unsigned long)val);
+
+	if (size == 1) {
+		shift = (where & 3) << 3;
+		data &= ~(0xff << shift);
+		data |= ((val & 0xff) << shift);
+	} else if (size == 2) {
+		shift = (where & 2) << 3;
+		data &= ~(0xffff << shift);
+		data |= ((val & 0xffff) << shift);
+	} else
+		data = val;
+
+	ret = sh7786_pcie_config_access(PCI_ACCESS_WRITE, bus,
+					devfn, where, &data);
+out:
+	spin_unlock_irqrestore(&sh7786_pcie_lock, flags);
+	return ret;
+}
+
+struct pci_ops sh7786_pci_ops = {
+	.read	= sh7786_pcie_read,
+	.write	= sh7786_pcie_write,
+};
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h
new file mode 100644
index 00000000000..c655290a775
--- /dev/null
+++ b/arch/sh/drivers/pci/pcie-sh7786.h
@@ -0,0 +1,589 @@
+/*
+ * SH7786 PCI-Express controller definitions.
+ *
+ * Copyright (C) 2008, 2009 Renesas Technology Corp.
+ * All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __PCI_SH7786_H
+#define __PCI_SH7786_H
+
+/* PCIe bus-0(x4) on SH7786 */			// Rev1.171
+#define SH4A_PCIE_SPW_BASE	0xFE000000	/* spw config address for controller 0 */
+#define SH4A_PCIE_SPW_BASE1	0xFE200000	/* spw config address for controller 1 (Rev1.14)*/
+#define SH4A_PCIE_SPW_BASE2	0xFCC00000	/* spw config address for controller 2 (Rev1.171)*/
+#define SH4A_PCIE_SPW_BASE_LEN	0x00080000
+
+#define SH4A_PCI_CNFG_BASE	0xFE040000	/* pci config address for controller 0 */
+#define SH4A_PCI_CNFG_BASE1	0xFE240000	/* pci config address for controller 1 (Rev1.14)*/
+#define SH4A_PCI_CNFG_BASE2	0xFCC40000	/* pci config address for controller 2 (Rev1.171)*/
+#define SH4A_PCI_CNFG_BASE_LEN	0x00040000
+
+#define SH4A_PCIPIO_ADDR_OFFSET	0x000001c0	/* offset to pci config_address */
+#define SH4A_PCIPIO_DATA_OFFSET	0x00000220	/* offset to pci config_data */
+
+/*
+ * for PEX8111(Max Payload Size=128B,PCIIO_SIZE=64K),
+ * for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
+ */
+
+/* PCI0-0: PCI I/O space */
+#define SH4A_PCIIO_BASE		0xFD000000	/* PCI I/O for controller 0 */
+#define SH4A_PCIIO_BASE1	0xFD800000	/* PCI I/O for controller 1 (Rev1.14)*/
+#define SH4A_PCIIO_BASE2	0xFC800000	/* PCI I/O for controller 2 (Rev1.171)*/
+
+#define SH4A_PCIIO_SIZE64	0x00010000	/* PLX allows only 64K */
+#define SH4A_PCIIO_SIZE		0x00800000	/* 8M */
+#define SH4A_PCIIO_SIZE2	0x00400000	/* 4M (Rev1.171)*/
+
+/* PCI0-1: PCI memory space 29-bit address */
+#define SH4A_PCIMEM_BASE	0x10000000
+#define SH4A_PCIMEM_SIZE	0x04000000	/* 64M */
+
+/* PCI0-2: PCI memory space 32-bit address */
+#define SH4A_PCIMEM_BASEA	0xC0000000	/*  for controller 0 */
+#define SH4A_PCIMEM_BASEA1	0xA0000000	/*  for controller 1 (Rev1.14)*/
+#define SH4A_PCIMEM_BASEA2	0x80000000	/*  for controller 2 (Rev1.171)*/
+#define SH4A_PCIMEM_SIZEA	0x20000000	/* 512M */
+
+/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
+#define SH4A_PCIBMSTR_TRANSLATION	0x20000000
+
+#define SH4A_PCI_DEVICE_ID		0x0002
+#define SH4A_PCI_VENDOR_ID		0x1912
+
+// PCI compatible 000-03f
+#define PCI_CMD		0x004
+#define PCI_RID		0x008
+#define PCI_IBAR	0x010
+#define PCI_MBAR0	0x014
+#define PCI_MBAR1	0x018
+
+/* PCI power management/MSI/capablity 040-0ff */
+/* PCIE extended 100-fff */
+
+/* SH7786 device identification */	// Rev1.171
+#define SH4A_PVR		(0xFF000030)
+#define SH4A_PVR_SHX3		(0x10400000)
+#define SH4A_PRR		(0xFF000044)
+#define SH4A_PRR_SH7786		(0x00000400)	// Rev1.171
+
+/*	SPVCR0		*/
+#define	SH4A_PCIEVCR0		(0x000000)	/* R - 0x0000 0000 32 */
+#define		BITS_TOP_MB	(24)
+#define		MASK_TOP_MB	(0xff<<BITS_TOP_MB)
+#define		BITS_BOT_MB	(16)
+#define		MASK_BOT_MB	(0xff<<BITS_BOT_MB)
+#define		BITS_VC_ID	(0)
+#define		MASK_VC_ID	(0xffff<<BITS_VC_ID)
+
+/*	SPVCR1		*/
+#define	SH4A_PCIEVCR1		(0x000004)	/* R - 0x0000 0000 32*/
+#define		BITS_BADOPC	(5)		/* 5 BADOPC 0 R/W */
+#define		MASK_BADOPC	(1<<BITS_BADOPC)
+#define		BITS_BADDEST	(4)		/*4 BADDEST 0 R/W  */
+#define		MASK_BADDEST	(1<<BITS_BADDEST)
+#define		BITS_UNSOLRESP	(3)		/* 3 UNSOLRESP 0 R/W  */
+#define		MASK_UNSOLRESP	(1<<BITS_UNSOLRESP)
+#define		BITS_ERRSNT	(1)		/* 1 ERRSNT 0 */
+#define		MASK_ERRSNT	(1<<BITS_ERRSNT)
+#define		BITS_ERRRCV	(0)		/* 0 ERRRCV 0 */
+#define		MASK_ERRRCV	(1<<BITS_ERRRCV)
+
+/*	PCIEECR		*/
+#define	SH4A_PCIEECR		(0x000008)	/* R/W - 0x0000 0000 32 */
+#define		BITS_ENBL	(0)	/* 0 ENBL 0 R/W */
+#define		MASK_ENBL	(1<<BITS_ENBL)
+
+/*	PCIEPAR		*/
+#define	SH4A_PCIEPAR		(0x000010)	/* R/W - 0x0000 0000 32 */
+#define		BITS_BN		(24)
+#define		MASK_BN		(0xff<<BITS_BN)
+#define		BITS_DN		(19)
+#define		MASK_DN		(0x1f<<BITS_DN)
+#define		BITS_FN		(16)
+#define		MASK_FN		(0x7<<BITS_FN)
+#define		BITS_EREGNO	(8)
+#define		MASK_EREGNO	(0xff<<BITS_EREGNO)
+#define		BITS_REGNO	(2)
+#define		MASK_REGNO	(0x3f<<BITS_REGNO)
+
+/*	PCIEPCTLR	*/
+#define	SH4A_PCIEPCTLR		(0x000018)	/* R/W - 0x0000 0000 32 */
+#define		BITS_CCIE	(31)	/*  31 CCIE */
+#define		MASK_CCIE	(1<<BITS_CCIE)
+#define		BITS_TYPE	(8)
+#define		MASK_TYPE	(1<<BITS_TYPE)
+#define		BITS_C_VC	(0)
+#define		MASK_C_VC	(1<<BITS_C_VC)
+
+/*	PCIEPDR		*/
+#define	SH4A_PCIEPDR		(0x000020)	/* R/W - 0x0000 0000 32 */
+#define		BITS_PDR	(0)
+#define		MASK_PDR	(0xffffffff<<BITS_PDR)
+
+/*	PCIEMSGALR	*/
+#define	SH4A_PCIEMSGALR		(0x000030)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGADRL	(0)
+#define		MASK_MSGADRL	(0xffffffff<<BITS_MSGADRL)
+
+/*	PCIEMSGAHR	*/
+#define	SH4A_PCIEMSGAHR		(0x000034)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGADRH	(0)
+#define		MASK_MSGADRH	(0xffffffff<<BITS_MSGADRH)
+
+/*	PCIEMSGCTLR	*/
+#define	SH4A_PCIEMSGCTLR	(0x000038)	/* R/W - 0x0000 0000 32 */
+#define		BITS_MSGIE	(31)
+#define		MASK_MSGIE	(1<<BITS_MSGIE)
+#define		BITS_MROUTE	(16)
+#define		MASK_MROUTE	(0x7<<BITS_MROUTE)
+#define		BITS_MCODE	(8)
+#define		MASK_MCODE	(0xff<<BITS_MCODE)
+#define		BITS_M_VC	(0)
+#define		MASK_M_VC	(1<<BITS_M_VC)
+
+/*	PCIEMSG		*/
+#define	SH4A_PCIEMSG		(0x000040)	/* W - - 32	*/
+#define		BITS_MDATA	(0)
+#define		MASK_MDATA	(0xffffffff<<BITS_MDATA)
+
+/*	PCIEPHYCTLR	*/
+#define	SH4A_PCIEPHYCTLR	(0x010000)	/* R/W - 0x0000 0000 32 */
+#define		BITS_CKE	(0)
+#define		MASK_CKE	(1<<BITS_CKE)
+
+/*	PCIERMSGIER	*/
+#define	SH4A_PCIERMSGIER	(0x004040)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYADRR	*/
+#define	SH4A_PCIEPHYADRR	(0x010004)	/* R/W - 0x0000 0000 32 */
+#define		BITS_ACK	(24)			// Rev1.171
+#define		MASK_ACK	(1<<BITS_ACK)		// Rev1.171
+#define		BITS_CMD	(16)			// Rev1.171
+#define		MASK_CMD	(0x03<<BITS_CMD)	// Rev1.171
+#define		BITS_LANE	(8)
+#define		MASK_LANE	(0x0f<<BITS_LANE)
+#define		BITS_ADR	(0)
+#define		MASK_ADR	(0xff<<BITS_ADR)
+
+/*	PCIEPHYDINR	*/							// Rev1.171 start.
+#define	SH4A_PCIEPHYDINR	(0x010008)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYDOUTR	*/
+#define	SH4A_PCIEPHYDOUTR	(0x01000C)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPHYSR	*/
+#define	SH4A_PCIEPHYSR		(0x010010)	/* R/W - 0x0000 0000 32 */	// Rev1.171 end.
+
+/*	PCIEPHYDATAR	*/
+#define	SH4A_PCIEPHYDATAR	(0x00008)	/* R/W - 0xxxxx xxxx 32 */
+#define		BITS_DATA	(0)
+#define		MASK_DATA	(0xffffffff<<BITS_DATA)
+
+/*	PCIETCTLR	*/
+#define	SH4A_PCIETCTLR		(0x020000)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_CFINT	(0)
+#define		MASK_CFINT	(1<<BITS_CFINT)
+
+/*	PCIETSTR	*/
+#define	SH4A_PCIETSTR		(0x020004)	/* R/W R/W 0x0000 0000 32  */
+
+/*	PCIEINTR	*/
+#define	SH4A_PCIEINTR		(0x020008)	/* R/W R/W 0x0000 0000 32  */
+#define		BITS_INT_RX_ERP			(31)
+#define		MASK_INT_RX_ERP			(1<<BITS_INT_RX_ERP)
+#define		BITS_INT_RX_VCX_Posted		(30)
+#define		MASK_INT_RX_VCX_Posted		(1<<BITS_INT_RX_VCX_Posted)
+#define		BITS_INT_RX_VCX_NonPosted	(29)
+#define		MASK_INT_RX_VCX_NonPosted	(1<<BITS_INT_RX_VCX_NonPosted)
+#define		BITS_INT_RX_VCX_CPL		(28)
+#define		MASK_INT_RX_VCX_CPL		(1<<BITS_INT_RX_VCX_CPL)
+#define		BITS_INT_TX_VCX_Posted		(26)
+#define		MASK_INT_TX_VCX_Posted		(1<<BITS_INT_TX_VCX_Posted)
+#define		BITS_INT_TX_VCX_NonPosted	(25)
+#define		MASK_INT_TX_VCX_NonPosted	(1<<BITS_INT_TX_VCX_NonPosted)
+#define		BITS_INT_TX_VCX_CPL		(24)
+#define		MASK_INT_TX_VCX_CPL		(1<<BITS_INT_TX_VCX_CPL)
+#define		BITS_INT_RX_VC0_Posted		(22)
+#define		MASK_INT_RX_VC0_Posted		(1<<BITS_INT_RX_VC0_Posted)
+#define		BITS_INT_RX_VC0_NonPosted	(21)
+#define		MASK_INT_RX_VC0_NonPosted	(1<<BITS_INT_RX_VC0_NonPosted)
+#define		BITS_INT_RX_VC0_CPL		(20)
+#define		MASK_INT_RX_VC0_CPL		(1<<BITS_INT_RX_VC0_CPL)
+#define		BITS_INT_TX_VC0_Posted		(18)
+#define		MASK_INT_TX_VC0_Posted		(1<<BITS_INT_TX_VC0_Posted)
+#define		BITS_INT_TX_VC0_NonPosted	(17)
+#define		MASK_INT_TX_VC0_NonPosted	(1<<BITS_INT_TX_VC0_NonPosted)
+#define		BITS_INT_TX_VC0_CPL		(16)
+#define		MASK_INT_TX_VC0_CPL		(1<<BITS_INT_TX_VC0_CPL)
+#define		BITS_INT_RX_CTRL		(15)
+#define		MASK_INT_RX_CTRL		(1<<BITS_INT_RX_CTRL)
+#define		BITS_INT_TX_CTRL		(14)
+#define		MASK_INT_TX_CTRL		(1<<BITS_INT_TX_CTRL)
+#define		BITS_INTTL			(11)
+#define		MASK_INTTL			(1<<BITS_INTTL)
+#define		BITS_INTDL			(10)
+#define		MASK_INTDL			(1<<BITS_INTDL)
+#define		BITS_INTMAC			(9)
+#define		MASK_INTMAC			(1<<BITS_INTMAC)
+#define		BITS_INTPM			(8)
+#define		MASK_INTPM			(1<<BITS_INTPM)
+
+/*	PCIEINTER	*/
+#define	SH4A_PCIEINTER		(0x02000C)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_INT_RX_ERP			(31)
+#define		MASK_INT_RX_ERP			(1<<BITS_INT_RX_ERP)
+#define		BITS_INT_RX_VCX_Posted		(30)
+#define		MASK_INT_RX_VCX_Posted		(1<<BITS_INT_RX_VCX_Posted)
+#define		BITS_INT_RX_VCX_NonPosted	(29)
+#define		MASK_INT_RX_VCX_NonPosted	(1<<BITS_INT_RX_VCX_NonPosted)
+#define		BITS_INT_RX_VCX_CPL		(28)
+#define		MASK_INT_RX_VCX_CPL		(1<<BITS_INT_RX_VCX_CPL)
+#define		BITS_INT_TX_VCX_Posted		(26)
+#define		MASK_INT_TX_VCX_Posted		(1<<BITS_INT_TX_VCX_Posted)
+#define		BITS_INT_TX_VCX_NonPosted	(25)
+#define		MASK_INT_TX_VCX_NonPosted	(1<<BITS_INT_TX_VCX_NonPosted)
+#define		BITS_INT_TX_VCX_CPL		(24)
+#define		MASK_INT_TX_VCX_CPL		(1<<BITS_INT_TX_VCX_CPL)
+#define		BITS_INT_RX_VC0_Posted		(22)
+#define		MASK_INT_RX_VC0_Posted		(1<<BITS_INT_RX_VC0_Posted)
+#define		BITS_INT_RX_VC0_NonPosted	(21)
+#define		MASK_INT_RX_VC0_NonPosted	(1<<BITS_INT_RX_VC0_NonPosted)
+#define		BITS_INT_RX_VC0_CPL		(20)
+#define		MASK_INT_RX_VC0_CPL		(1<<BITS_INT_RX_VC0_CPL)
+#define		BITS_INT_TX_VC0_Posted		(18)
+#define		MASK_INT_TX_VC0_Posted		(1<<BITS_INT_TX_VC0_Posted)
+#define		BITS_INT_TX_VC0_NonPosted	(17)
+#define		MASK_INT_TX_VC0_NonPosted	(1<<BITS_INT_TX_VC0_NonPosted)
+#define		BITS_INT_TX_VC0_CPL		(16)
+#define		MASK_INT_TX_VC0_CPL		(1<<BITS_INT_TX_VC0_CPL)
+#define		BITS_INT_RX_CTRL		(15)
+#define		MASK_INT_RX_CTRL		(1<<BITS_INT_RX_CTRL)
+#define		BITS_INT_TX_CTRL		(14)
+#define		MASK_INT_TX_CTRL		(1<<BITS_INT_TX_CTRL)
+#define		BITS_INTTL			(11)
+#define		MASK_INTTL			(1<<BITS_INTTL)
+#define		BITS_INTDL			(10)
+#define		MASK_INTDL			(1<<BITS_INTDL)
+#define		BITS_INTMAC			(9)
+#define		MASK_INTMAC			(1<<BITS_INTMAC)
+#define		BITS_INTPM			(8)
+#define		MASK_INTPM			(1<<BITS_INTPM)
+
+/*	PCIEAIR	 */
+#define	SH4A_PCIEAIR		(SH4A_PCIE_BASE + 0x020010)	/* R/W R/W 0xxxxx xxxx 32 */
+
+/*	 PCIECIR	 */
+#define	SH4A_PCIECIR		(SH4A_PCIE_BASE)	/* R/W R/W 0xxxxx xxxx 32 */
+
+/*	 PCIEERRFR	 */								// Rev1.18
+#define	SH4A_PCIEERRFR		(0x020020)		/* R/W R/W 0xxxxx xxxx 32 */	// Rev1.18
+											// Rev1.18
+/*	PCIELAR0	*/
+#define	SH4A_PCIELAR0		(0x020200)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_LARn	(20)
+#define		MASK_LARn	(0xfff<<BITS_LARn)
+
+#define	SH4A_PCIE_020204	(0x020204)	/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIELAMR0	*/
+#define	SH4A_PCIELAMR0		(0x020208)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_LAMRn	(20)
+#define		MASK_LAMRn	(0x1ff<<BITS_LAMRn)
+#define		BITS_LAREn	(0)
+#define		MASK_LAREn	(0x1<<BITS_LAREn)
+
+/*	PCIECSCR0	*/
+#define	SH4A_PCIECSCR0		(0x020210)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_RANGE	(2)
+#define		MASK_RANGE	(0x7<<BITS_RANGE)
+#define		BITS_SNPMD	(0)
+#define		MASK_SNPMD	(0x3<<BITS_SNPMD)
+
+/*	PCIECSAR0	*/
+#define	SH4A_PCIECSAR0		(0x020214)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_CSADR	(0)
+#define		MASK_CSADR	(0xffffffff<<BITS_CSADR)
+
+/*	PCIESTCTLR0	*/
+#define	SH4A_PCIESTCTLR0	(0x020218)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_SHPRI	(8)
+#define		MASK_SHPRI	(0x0f<<BITS_SHPRI)
+
+#define	SH4A_PCIE_020224	(0x020224)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR1		(0x020220)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR1		(0x020228)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR1		(0x020230)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR1		(0x020234)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR1	(0x020238)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR2		(0x020240)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020244	(0x020244)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR2		(0x020248)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR2		(0x020250)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR2		(0x020254)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR2	(0x020258)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR3		(0x020260)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020264	(0x020264)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR3		(0x020268)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR3		(0x020270)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR3		(0x020274)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR3	(0x020278)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR4		(0x020280)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_020284	(0x020284)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR4		(0x020288)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR4		(0x020290)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR4		(0x020294)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR4	(0x020298)	/* R/W R/W 0x0000 0000 32 */
+
+#define	SH4A_PCIELAR5		(0x0202A0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIE_0202A4	(0x0202A4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIELAMR5		(0x0202A8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSCR5		(0x0202B0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIECSAR5		(0x0202B4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIESTCTLR5	(0x0202B8)	/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEPARL0	*/
+#define	SH4A_PCIEPARL0		(0x020400)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAL	(18)
+#define		MASK_PAL	(0x3fff<<BITS_PAL)
+
+/*	PCIEPARH0	*/
+#define	SH4A_PCIEPARH0		(0x020404)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAH	(0)
+#define		MASK_PAH	(0xffffffff<<BITS_PAH)
+
+/*	PCIEPAMR0	 */
+#define	SH4A_PCIEPAMR0		(0x020408)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_PAM	(18)
+#define		MASK_PAM	(0x3fff<<BITS_PAM)
+
+/*	PCIEPTCTLR0	*/
+#define	SH4A_PCIEPTCTLR0	(0x02040C)	/* R/W R/W 0x0000 0000 32 */
+#define		BITS_PARE	(31)
+#define		MASK_PARE	(0x1<<BITS_PARE)
+#define		BITS_TC		(20)
+#define		MASK_TC		(0x7<<BITS_TC)
+#define		BITS_T_VC	(16)
+#define		MASK_T_VC	(0x1<<BITS_T_VC)
+#define		BITS_LOCK	(12)
+#define		MASK_LOCK	(0x1<<BITS_LOCK)
+#define		BITS_SPC	(8)
+#define		MASK_SPC	(0x1<<BITS_SPC)
+
+#define	SH4A_PCIEPARL1		(0x020420)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH1		(0x020424)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR1		(0x020428)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR1	(0x02042C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARL2		(0x020440)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH2		(0x020444)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR2		(0x020448)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR2	(0x02044C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARL3		(0x020460)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH3		(0x020464)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR3		(0x020468)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR3	(0x02046C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARL4		(0x020480)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH4		(0x020484)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR4		(0x020488)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR4	(0x02048C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARL5		(0x0204A0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPARH5		(0x0204A4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPAMR5		(0x0204A8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPTCTLR5	(0x0204AC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMAOR		(0x021000)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR0		(0x021100)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR0	(0x021104)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR0		(0x021108)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR0	(0x02110C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR0	(0x021110)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR0	(0x021114)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR0	(0x021118)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR0	(0x02111C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR0		(0x021120)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R0	(0x021124)	/* R/W R/W 0x0000 0000 - */
+#define	SH4A_PCIEDMCCCR0	(0x021128)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR1		(0x021140)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR1	(0x021144)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR1		(0x021148)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR1	(0x02114C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR1	(0x021150)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR1	(0x021154)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR1	(0x021158)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR1	(0x02115C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR1		(0x021160)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R1	(0x021164)	/* R/W R/W 0x0000 0000 - */
+#define	SH4A_PCIEDMCCCR1	(0x021168)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR2		(0x021180)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR2	(0x021184)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR2		(0x021188)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR2	(0x02118C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR2	(0x021190)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR2	(0x021194)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR2	(0x021198)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR2	(0x02119C)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR2		(0x0211A0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R2	(0x0211A4)	/* R/W R/W 0x0000 0000 -  */
+#define	SH4A_PCIEDMCCCR2	(0x0211A8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAR3		(0x0211C0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSAHR3	(0x0211C4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAR3		(0x0211C8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMDAHR3	(0x0211CC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMBCNTR3	(0x0211D0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSBCNTR3	(0x0211D4)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMSTRR3	(0x0211D8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCAR3	(0x0211DC)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCCR3		(0x0211E0)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEDMCC2R3	(0x0211E4)	/* R/W R/W 0x0000 0000 -  */
+#define	SH4A_PCIEDMCCCR3	(0x0211E8)	/* R/W R/W 0x0000 0000 32 */
+#define	SH4A_PCIEPCICONF0	(0x040000)	/* R R - 8/16/32 */
+#define	SH4A_PCIEPCICONF1	(0x040004)	/* R/W R/W 0x0008 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF2	(0x040008)	/* R/W R/W 0xFF00 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF3	(0x04000C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF4	(0x040010)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF5	(0x040014)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF6	(0x040018)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF7	(0x04001C)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF8	(0x040020)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF9	(0x040024)	/* - R/W - 8/16/32 */
+#define	SH4A_PCIEPCICONF10	(0x040028)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF11	(0x04002C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF12	(0x040030)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF13	(0x040034)	/* R/W R/W 0x0000 0040 8/16/32 */
+#define	SH4A_PCIEPCICONF14	(0x040038)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEPCICONF15	(0x04003C)	/* R/W R/W 0x0000 00FF 8/16/32 */
+#define	SH4A_PCIEPMCAP0		(0x040040)	/* R/W R 0x0003 5001 8/16/32 */
+#define	SH4A_PCIEPMCAP1		(0x040044)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP0	(0x040050)	/* R/W R/W 0x0180 7005 8/16/32 */
+#define	SH4A_PCIEMSICAP1	(0x040054)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP2	(0x040058)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP3	(0x04005C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP4	(0x040060)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEMSICAP5	(0x040064)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP0	(0x040070)	/* R/W R/W 0x0001 0010 8/16/32 */
+#define	SH4A_PCIEEXPCAP1	(0x040074)	/* R/W R 0x0000 0005 8/16/32 */
+#define	SH4A_PCIEEXPCAP2	(0x040078)	/* R/W R/W 0x0000 0801 8/16/32 */
+#define	SH4A_PCIEEXPCAP3	(0x04007C)	/* R/W R 0x0003 F421 8/16/32 */
+#define	SH4A_PCIEEXPCAP4	(0x040080)	/* R/W R/W 0x0041 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP5	(0x040084)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP6	(0x040088)	/* R/W R/W 0x0000 03C0 8/16/32 */
+#define	SH4A_PCIEEXPCAP7	(0x04008C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEEXPCAP8	(0x040090)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP0		(0x040100)	/* R/W R 0x1B01 0002 8/16/32 */
+#define	SH4A_PCIEVCCAP1		(0x040104)	/* R R 0x0000 0001 8/16/32 */
+#define	SH4A_PCIEVCCAP2		(0x040108)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP3		(0x04010C)	/* R R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP4		(0x040110)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP5		(0x040114)	/* R/W R/W 0x8000 00FF 8/16/32 */
+#define	SH4A_PCIEVCCAP6		(0x040118)	/* R/W R 0x0002 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP7		(0x04011C)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP8		(0x040120)	/* R/W R/W 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEVCCAP9		(0x040124)	/* R/W R 0x0002 0000 8/16/32 */
+#define	SH4A_PCIENUMCAP0	(0x0001B0)	/* RW R 0x0001 0003 8/16/32 */
+#define	SH4A_PCIENUMCAP1	(0x0001B4)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIENUMCAP2	(0x0001B8)	/* R R 0x0000 0000 8/16/32 */
+#define	SH4A_PCIEIDSETR0	(0x041000)	/* R/W R 0x0000 FFFF 16/32 */
+#define	SH4A_PCIEIDSETR1	(0x041004)	/* R/W R 0xFF00 0000 16/32 */
+#define	SH4A_PCIEBAR0SETR	(0x041008)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR1SETR	(0x04100C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR2SETR	(0x041010)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR3SETR	(0x041014)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR4SETR	(0x041018)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEBAR5SETR	(0x04101C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIECISSETR	(0x041020)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEIDSETR2	(0x041024)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEEROMSETR	(0x041028)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDSERSETR0	(0x04102C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDSERSETR1	(0x041030)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIECTLR		(0x041040)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLSR		(0x041044)	/* R/W1C R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLCTLR		(0x041048)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDLSR		(0x04104C)	/* R/W1C R 0x4003 0000 16/32 */
+#define	SH4A_PCIEDLCTLR		(0x041050)	/* R R 0x0000 0000 16/32 */
+#define	SH4A_PCIEMACSR		(0x041054)	/* R/W1C R 0x0041 0000 16/32 */
+#define	SH4A_PCIEMACCTLR	(0x041058)	/* R/W R 0x0000 0000 16/32 */
+#define		PCIEMACCTLR_SCR_DIS	(1 << 27)	/* scramble disable */
+#define	SH4A_PCIEPMSTR		(0x04105C)	/* R/W1C R 0x0000 0000 16/32 */
+#define	SH4A_PCIEPMCTLR		(0x041060)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETLINTENR	(0x041064)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEDLINTENR	(0x041068)	/* R/W R 0x0000 0000 16/32 */
+#define		PCIEDLINTENR_DLL_ACT_ENABLE	(1 << 31) /* DL active irq */
+#define	SH4A_PCIEMACINTENR	(0x04106C)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIEPMINTENR	(0x041070)	/* R/W R 0x0000 0000 16/32 */
+#define	SH4A_PCIETXDCTLR	(0x044000)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXCTLR		(0x044020)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXSR		(0x044028)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVC0DCTLR	(0x044100)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVC0SR	(0x044108)	/* R/W - H'00888000_00000000 32/64 */
+#define	SH4A_PCIEVC0PDTXR	(0x044110)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PHTXR	(0x044118)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPDTXR	(0x044120)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPHTXR	(0x044128)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CDTXR	(0x044130)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CHTXR	(0x044138)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVCXDCTLR	(0x044200)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIETXVCXSR	(0x044208)	/* R/W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPDTXR	(0x044210)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPHTXR	(0x044218)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPDTXR	(0x044220)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPHTXR	(0x044228)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCDTXR	(0x044230)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCHTXR	(0x044238)	/* W - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERDCTLR		(0x046000)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPCTLR	(0x046008)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPHR		(0x046010)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEERPERR		(0x046018)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVC0DCTLR	(0x046100)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVC0SR	(0x046108)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PDRXR	(0x046140)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PHRXR	(0x046148)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0PERR	(0x046150)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPDRXR	(0x046158)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPHRXR	(0x046160)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0NPERR	(0x046168)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CDRXR	(0x046170)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CHRXR	(0x046178)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVC0CERR	(0x046180)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVCXDCTLR	(0x046200)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIERXVCXSR	(0x046208)	/* RW - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPDRXR	(0x046240)	/* R - H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPHRXR	(0x046248)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXPERR	(0x046250)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPDRXR	(0x046258)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPHRXR	(0x046260)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXNPERR	(0x046268)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCDRXR	(0x046270)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCHRXR	(0x046278)	/* R H'00000000_00000000 32/64 */
+#define	SH4A_PCIEVCXCERR	(0x046280)	/* R H'00000000_00000000 32/64 */
+
+/* SSI Register Definition for MSI WORK AROUND --hamada */
+#define SH4A_PCI_SSI_BASE	0xFFE00000	/* spw config address	*/
+#define SH4A_PCI_SSI_BASE_LEN	0x00100000	/* 1MB			*/
+
+#define	SH4A_SSICR0		(0x000000)
+#define	SH4A_SSICR1		(0x010000)
+#define	SH4A_SSICR2		(0x020000)
+#define	SH4A_SSICR3		(0x030000)
+
+#define PCI_REG(x)		((x) + 0x40000)
+
+static inline void
+pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg)
+{
+	__raw_writel(val, chan->reg_base + reg);
+}
+
+static inline unsigned long
+pci_read_reg(struct pci_channel *chan, unsigned long reg)
+{
+	return __raw_readl(chan->reg_base + reg);
+}
+
+#endif /* __PCI_SH7786_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index 157c320272c..e8e78137c6f 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -85,4 +85,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__after_atomic_inc()	barrier()
 
 #include <asm-generic/atomic-long.h>
+#include <asm-generic/atomic64.h>
+
 #endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/kmap_types.h b/arch/sh/include/asm/kmap_types.h
index 84d565c696b..5962b08b6dd 100644
--- a/arch/sh/include/asm/kmap_types.h
+++ b/arch/sh/include/asm/kmap_types.h
@@ -3,30 +3,12 @@
 
 /* Dummy header just to define km_type. */
 
-
 #ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define  __WITH_KM_FENCE
 #endif
 
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
-#undef D
+#undef __WITH_KM_FENCE
 
 #endif
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
new file mode 100644
index 00000000000..a8153c2aa6f
--- /dev/null
+++ b/arch/sh/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH_PERF_COUNTER_H
+#define __ASM_SH_PERF_COUNTER_H
+
+/* SH only supports software counters through this interface. */
+#define set_perf_counter_pending()	do { } while (0)
+
+#endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 318516f6bfa..c18f7d09281 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -15,6 +15,7 @@
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
 #include <linux/sh_timer.h>
+#include <linux/usb/r8a66597.h>
 #include <asm/clock.h>
 
 static struct resource iic_resources[] = {
@@ -38,18 +39,20 @@ static struct platform_device iic_device = {
 	.resource       = iic_resources,
 };
 
+static struct r8a66597_platdata r8a66597_data = {
+	/* This set zero to all members */
+};
+
 static struct resource usb_host_resources[] = {
 	[0] = {
-		.name   = "r8a66597_hcd",
 		.start  = 0xa4d80000,
 		.end    = 0xa4d800ff,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.name   = "r8a66597_hcd",
 		.start  = 65,
 		.end    = 65,
-		.flags  = IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -59,6 +62,7 @@ static struct platform_device usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(usb_host_resources),
 	.resource	= usb_host_resources,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index d8f4a13aeff..e1bb80b2a27 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
+#include <linux/usb/r8a66597.h>
 #include <linux/sh_timer.h>
 #include <linux/io.h>
 #include <asm/clock.h>
@@ -396,9 +397,12 @@ static struct platform_device rtc_device = {
 	.resource	= rtc_resources,
 };
 
+static struct r8a66597_platdata r8a66597_data = {
+	/* This set zero to all members */
+};
+
 static struct resource sh7723_usb_host_resources[] = {
 	[0] = {
-		.name	= "r8a66597_hcd",
 		.start	= 0xa4d80000,
 		.end	= 0xa4d800ff,
 		.flags	= IORESOURCE_MEM,
@@ -406,7 +410,7 @@ static struct resource sh7723_usb_host_resources[] = {
 	[1] = {
 		.start	= 65,
 		.end	= 65,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
 
@@ -416,6 +420,7 @@ static struct platform_device sh7723_usb_host_device = {
 	.dev = {
 		.dma_mask		= NULL,         /*  not use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
 	},
 	.num_resources	= ARRAY_SIZE(sh7723_usb_host_resources),
 	.resource	= sh7723_usb_host_resources,
diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c
index 80c35ff71d5..1719957c0a6 100644
--- a/arch/sh/kernel/init_task.c
+++ b/arch/sh/kernel/init_task.c
@@ -10,9 +10,6 @@
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct pt_regs fake_swapper_regs;
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial thread structure.
  *
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index cc12cd48bbc..3f8b6a92eab 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -37,6 +37,8 @@ config SPARC64
 	select HAVE_KPROBES
 	select HAVE_LMB
 	select HAVE_SYSCALL_WRAPPERS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select RTC_DRV_CMOS
 	select RTC_DRV_BQ4802
@@ -93,6 +95,9 @@ config AUDIT_ARCH
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y if SPARC64
 
+config HAVE_DYNAMIC_PER_CPU_AREA
+	def_bool y if SPARC64
+
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index b5d63bd8716..0123a4c596c 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Fri Apr 17 02:03:07 2009
+# Linux kernel version: 2.6.30
+# Tue Jun 16 04:59:36 2009
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -19,6 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -82,7 +83,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -95,16 +95,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -202,6 +207,7 @@ CONFIG_NR_QUICK=1
 CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
@@ -321,6 +327,7 @@ CONFIG_VLAN_8021Q=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -340,7 +347,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -364,6 +375,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=m
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -399,6 +411,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -477,10 +490,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
@@ -499,6 +508,7 @@ CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -507,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -521,7 +532,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -569,7 +579,6 @@ CONFIG_DM_ZERO=m
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,6 +644,7 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -1127,6 +1137,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
 CONFIG_SND_DRIVERS=y
@@ -1153,6 +1168,7 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1183,6 +1199,7 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1229,6 +1246,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
@@ -1246,9 +1264,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1462,6 +1485,7 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1636,25 +1660,28 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
index a11b89ee9ef..926397d345f 100644
--- a/arch/sparc/include/asm/cpudata_64.h
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -6,9 +6,6 @@
 #ifndef _SPARC64_CPUDATA_H
 #define _SPARC64_CPUDATA_H
 
-#include <asm/hypervisor.h>
-#include <asm/asi.h>
-
 #ifndef __ASSEMBLY__
 
 #include <linux/percpu.h>
@@ -38,202 +35,10 @@ DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
 #define cpu_data(__cpu)		per_cpu(__cpu_data, (__cpu))
 #define local_cpu_data()	__get_cpu_var(__cpu_data)
 
-/* Trap handling code needs to get at a few critical values upon
- * trap entry and to process TSB misses.  These cannot be in the
- * per_cpu() area as we really need to lock them into the TLB and
- * thus make them part of the main kernel image.  As a result we
- * try to make this as small as possible.
- *
- * This is padded out and aligned to 64-bytes to avoid false sharing
- * on SMP.
- */
-
-/* If you modify the size of this structure, please update
- * TRAP_BLOCK_SZ_SHIFT below.
- */
-struct thread_info;
-struct trap_per_cpu {
-/* D-cache line 1: Basic thread information, cpu and device mondo queues */
-	struct thread_info	*thread;
-	unsigned long		pgd_paddr;
-	unsigned long		cpu_mondo_pa;
-	unsigned long		dev_mondo_pa;
-
-/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
-	unsigned long		resum_mondo_pa;
-	unsigned long		resum_kernel_buf_pa;
-	unsigned long		nonresum_mondo_pa;
-	unsigned long		nonresum_kernel_buf_pa;
-
-/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
-	struct hv_fault_status	fault_info;
-
-/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
-	unsigned long		cpu_mondo_block_pa;
-	unsigned long		cpu_list_pa;
-	unsigned long		tsb_huge;
-	unsigned long		tsb_huge_temp;
-
-/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
-	unsigned long		irq_worklist_pa;
-	unsigned int		cpu_mondo_qmask;
-	unsigned int		dev_mondo_qmask;
-	unsigned int		resum_qmask;
-	unsigned int		nonresum_qmask;
-	void			*hdesc;
-} __attribute__((aligned(64)));
-extern struct trap_per_cpu trap_block[NR_CPUS];
-extern void init_cur_cpu_trap(struct thread_info *);
-extern void setup_tba(void);
-extern int ncpus_probed;
 extern const struct seq_operations cpuinfo_op;
 
-extern unsigned long real_hard_smp_processor_id(void);
-
-struct cpuid_patch_entry {
-	unsigned int	addr;
-	unsigned int	cheetah_safari[4];
-	unsigned int	cheetah_jbus[4];
-	unsigned int	starfire[4];
-	unsigned int	sun4v[4];
-};
-extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
-
-struct sun4v_1insn_patch_entry {
-	unsigned int	addr;
-	unsigned int	insn;
-};
-extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
-	__sun4v_1insn_patch_end;
-
-struct sun4v_2insn_patch_entry {
-	unsigned int	addr;
-	unsigned int	insns[2];
-};
-extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
-	__sun4v_2insn_patch_end;
-
 #endif /* !(__ASSEMBLY__) */
 
-#define TRAP_PER_CPU_THREAD		0x00
-#define TRAP_PER_CPU_PGD_PADDR		0x08
-#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
-#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
-#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
-#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
-#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
-#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
-#define TRAP_PER_CPU_FAULT_INFO		0x40
-#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
-#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
-#define TRAP_PER_CPU_TSB_HUGE		0xd0
-#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
-#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
-#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
-#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
-#define TRAP_PER_CPU_RESUM_QMASK	0xf0
-#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
-
-#define TRAP_BLOCK_SZ_SHIFT		8
-
-#include <asm/scratchpad.h>
-
-#define __GET_CPUID(REG)				\
-	/* Spitfire implementation (default). */	\
-661:	ldxa		[%g0] ASI_UPA_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	 and		REG, 0x1f, REG;			\
-	nop;						\
-	.section	.cpuid_patch, "ax";		\
-	/* Instruction location. */			\
-	.word		661b;				\
-	/* Cheetah Safari implementation. */		\
-	ldxa		[%g0] ASI_SAFARI_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	and		REG, 0x3ff, REG;		\
-	nop;						\
-	/* Cheetah JBUS implementation. */		\
-	ldxa		[%g0] ASI_JBUS_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	and		REG, 0x1f, REG;			\
-	nop;						\
-	/* Starfire implementation. */			\
-	sethi		%hi(0x1fff40000d0 >> 9), REG;	\
-	sllx		REG, 9, REG;			\
-	or		REG, 0xd0, REG;			\
-	lduwa		[REG] ASI_PHYS_BYPASS_EC_E, REG;\
-	/* sun4v implementation. */			\
-	mov		SCRATCHPAD_CPUID, REG;		\
-	ldxa		[REG] ASI_SCRATCHPAD, REG;	\
-	nop;						\
-	nop;						\
-	.previous;
-
-#ifdef CONFIG_SMP
-
-#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	__GET_CPUID(TMP)			\
-	sethi	%hi(trap_block), DEST;		\
-	sllx	TMP, TRAP_BLOCK_SZ_SHIFT, TMP;	\
-	or	DEST, %lo(trap_block), DEST;	\
-	add	DEST, TMP, DEST;		\
-
-/* Clobbers TMP, current address space PGD phys address into DEST.  */
-#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
-
-/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
-#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
-
-/* Clobbers TMP, loads DEST with current thread info pointer.  */
-#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
-
-/* Given the current thread info pointer in THR, load the per-cpu
- * area base of the current processor into DEST.  REG1, REG2, and REG3 are
- * clobbered.
- *
- * You absolutely cannot use DEST as a temporary in this code.  The
- * reason is that traps can happen during execution, and return from
- * trap will load the fully resolved DEST per-cpu base.  This can corrupt
- * the calculations done by the macro mid-stream.
- */
-#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)	\
-	lduh	[THR + TI_CPU], REG1;			\
-	sethi	%hi(__per_cpu_shift), REG3;		\
-	sethi	%hi(__per_cpu_base), REG2;		\
-	ldx	[REG3 + %lo(__per_cpu_shift)], REG3;	\
-	ldx	[REG2 + %lo(__per_cpu_base)], REG2;	\
-	sllx	REG1, REG3, REG3;			\
-	add	REG3, REG2, DEST;
-
-#else
-
-#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	sethi	%hi(trap_block), DEST;		\
-	or	DEST, %lo(trap_block), DEST;	\
-
-/* Uniprocessor versions, we know the cpuid is zero.  */
-#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
-
-/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
-#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
-
-#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
-
-/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
-#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
-
-#endif /* !(CONFIG_SMP) */
+#include <asm/trap_block.h>
 
 #endif /* _SPARC64_CPUDATA_H */
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 0f4150e2661..204e4bf6443 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -1,8 +1,166 @@
 #ifndef ___ASM_SPARC_DMA_MAPPING_H
 #define ___ASM_SPARC_DMA_MAPPING_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/dma-mapping_64.h>
-#else
-#include <asm/dma-mapping_32.h>
-#endif
+
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+struct dma_ops {
+	void *(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void (*free_coherent)(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t dma_handle);
+	dma_addr_t (*map_page)(struct device *dev, struct page *page,
+			       unsigned long offset, size_t size,
+			       enum dma_data_direction direction);
+	void (*unmap_page)(struct device *dev, dma_addr_t dma_addr,
+			   size_t size,
+			   enum dma_data_direction direction);
+	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction direction);
+	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
+			 int nhwentries,
+			 enum dma_data_direction direction);
+	void (*sync_single_for_cpu)(struct device *dev,
+				    dma_addr_t dma_handle, size_t size,
+				    enum dma_data_direction direction);
+	void (*sync_single_for_device)(struct device *dev,
+				       dma_addr_t dma_handle, size_t size,
+				       enum dma_data_direction direction);
+	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
+				int nelems,
+				enum dma_data_direction direction);
+	void (*sync_sg_for_device)(struct device *dev,
+				   struct scatterlist *sg, int nents,
+				   enum dma_data_direction dir);
+};
+extern const struct dma_ops *dma_ops;
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
+				 (unsigned long)cpu_addr & ~PAGE_MASK, size,
+				 direction);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_ops->unmap_page(dev, dma_addr, size, direction);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_ops->map_page(dev, page, offset, size, direction);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_ops->unmap_page(dev, dma_address, size, direction);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_ops->map_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction)
+{
+	dma_ops->unmap_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction direction)
+{
+	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      enum dma_data_direction direction)
+{
+	if (dma_ops->sync_single_for_device)
+		dma_ops->sync_single_for_device(dev, dma_handle, size,
+						direction);
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction direction)
+{
+	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					  struct scatterlist *sg, int nelems,
+					  enum dma_data_direction direction)
+{
+	if (dma_ops->sync_sg_for_device)
+		dma_ops->sync_sg_for_device(dev, sg, nelems, direction);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction dir)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, dir);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction dir)
+{
+	dma_sync_single_for_device(dev, dma_handle+offset, size, dir);
+}
+
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	/*
+	 * no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe
+	 */
+	return (1 << INTERNODE_CACHE_SHIFT);
+}
+
 #endif
diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
deleted file mode 100644
index 8a57ea0573e..00000000000
--- a/arch/sparc/include/asm/dma-mapping_32.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _ASM_SPARC_DMA_MAPPING_H
-#define _ASM_SPARC_DMA_MAPPING_H
-
-#include <linux/types.h>
-
-struct device;
-struct scatterlist;
-struct page;
-
-#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
-
-extern int dma_supported(struct device *dev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
-extern void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-extern void dma_free_coherent(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t dma_handle);
-extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-				 size_t size,
-				 enum dma_data_direction direction);
-extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-			     size_t size,
-			     enum dma_data_direction direction);
-extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			       unsigned long offset, size_t size,
-			       enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-			   size_t size, enum dma_data_direction direction);
-extern int dma_map_sg(struct device *dev, struct scatterlist *sg,
-		      int nents, enum dma_data_direction direction);
-extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-			 int nents, enum dma_data_direction direction);
-extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-				    size_t size,
-				    enum dma_data_direction direction);
-extern void dma_sync_single_for_device(struct device *dev,
-				       dma_addr_t dma_handle,
-				       size_t size,
-				       enum dma_data_direction direction);
-extern void dma_sync_single_range_for_cpu(struct device *dev,
-					  dma_addr_t dma_handle,
-					  unsigned long offset,
-					  size_t size,
-					  enum dma_data_direction direction);
-extern void dma_sync_single_range_for_device(struct device *dev,
-					     dma_addr_t dma_handle,
-					     unsigned long offset, size_t size,
-					     enum dma_data_direction direction);
-extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				int nelems, enum dma_data_direction direction);
-extern void dma_sync_sg_for_device(struct device *dev,
-				   struct scatterlist *sg, int nelems,
-				   enum dma_data_direction direction);
-extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
-extern int dma_get_cache_alignment(void);
-
-#define dma_alloc_noncoherent	dma_alloc_coherent
-#define dma_free_noncoherent	dma_free_coherent
-
-#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h
deleted file mode 100644
index bfa64f9702d..00000000000
--- a/arch/sparc/include/asm/dma-mapping_64.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef _ASM_SPARC64_DMA_MAPPING_H
-#define _ASM_SPARC64_DMA_MAPPING_H
-
-#include <linux/scatterlist.h>
-#include <linux/mm.h>
-
-#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
-
-struct dma_ops {
-	void *(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void (*free_coherent)(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t dma_handle);
-	dma_addr_t (*map_single)(struct device *dev, void *cpu_addr,
-				 size_t size,
-				 enum dma_data_direction direction);
-	void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
-			     size_t size,
-			     enum dma_data_direction direction);
-	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction direction);
-	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
-			 int nhwentries,
-			 enum dma_data_direction direction);
-	void (*sync_single_for_cpu)(struct device *dev,
-				    dma_addr_t dma_handle, size_t size,
-				    enum dma_data_direction direction);
-	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
-				int nelems,
-				enum dma_data_direction direction);
-};
-extern const struct dma_ops *dma_ops;
-
-extern int dma_supported(struct device *dev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag)
-{
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_handle)
-{
-	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
-{
-	return dma_ops->map_single(dev, cpu_addr, size, direction);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_ops->unmap_single(dev, dma_addr, size, direction);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_ops->map_single(dev, page_address(page) + offset,
-				   size, direction);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_ops->unmap_single(dev, dma_address, size, direction);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_ops->map_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction)
-{
-	dma_ops->unmap_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					   dma_addr_t dma_handle, size_t size,
-					   enum dma_data_direction direction)
-{
-	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t dma_handle,
-					      size_t size,
-					      enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 unsigned long offset,
-						 size_t size,
-						 enum dma_data_direction direction)
-{
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sg, int nelems,
-				       enum dma_data_direction direction)
-{
-	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sg, int nelems,
-					  enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return (dma_addr == DMA_ERROR_CODE);
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	/* no easy way to get cache size on all processors, so return
-	 * the maximum possible, to be safe */
-	return (1 << INTERNODE_CACHE_SHIFT);
-}
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h)	(1)
-
-#endif /* _ASM_SPARC64_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/errno.h b/arch/sparc/include/asm/errno.h
index a9ef172977d..4e2bc490d71 100644
--- a/arch/sparc/include/asm/errno.h
+++ b/arch/sparc/include/asm/errno.h
@@ -110,4 +110,6 @@
 #define	EOWNERDEAD	132	/* Owner died */
 #define	ENOTRECOVERABLE	133	/* State not recoverable */
 
+#define	ERFKILL		134	/* Operation not possible due to RF-kill */
+
 #endif
diff --git a/arch/sparc/include/asm/ftrace.h b/arch/sparc/include/asm/ftrace.h
index d27716cd38c..b0f18e9893d 100644
--- a/arch/sparc/include/asm/ftrace.h
+++ b/arch/sparc/include/asm/ftrace.h
@@ -11,4 +11,15 @@ extern void _mcount(void);
 
 #endif
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* reloction of mcount call site is the same as the address */
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+#endif /*  CONFIG_DYNAMIC_FTRACE */
+
 #endif /* _ASM_SPARC64_FTRACE */
diff --git a/arch/sparc/include/asm/kmap_types.h b/arch/sparc/include/asm/kmap_types.h
index 602f5e034f7..aad21745fbb 100644
--- a/arch/sparc/include/asm/kmap_types.h
+++ b/arch/sparc/include/asm/kmap_types.h
@@ -5,21 +5,6 @@
  * is actually used on sparc.  -DaveM
  */
 
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
 #endif
diff --git a/arch/sparc/include/asm/mdesc.h b/arch/sparc/include/asm/mdesc.h
index 1acc7272e53..9faa046713f 100644
--- a/arch/sparc/include/asm/mdesc.h
+++ b/arch/sparc/include/asm/mdesc.h
@@ -71,7 +71,8 @@ struct mdesc_notifier_client {
 
 extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
 
-extern void mdesc_fill_in_cpu_data(cpumask_t mask);
+extern void mdesc_fill_in_cpu_data(cpumask_t *mask);
+extern void mdesc_populate_present_mask(cpumask_t *mask);
 
 extern void sun4v_mdesc_init(void);
 
diff --git a/arch/sparc/include/asm/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
index bee64593023..007aafb4ae9 100644
--- a/arch/sparc/include/asm/percpu_64.h
+++ b/arch/sparc/include/asm/percpu_64.h
@@ -7,20 +7,16 @@ register unsigned long __local_per_cpu_offset asm("g5");
 
 #ifdef CONFIG_SMP
 
-extern void real_setup_per_cpu_areas(void);
+#include <asm/trap_block.h>
 
-extern unsigned long __per_cpu_base;
-extern unsigned long __per_cpu_shift;
 #define __per_cpu_offset(__cpu) \
-	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
+	(trap_block[(__cpu)].__per_cpu_base)
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
 #define __my_cpu_offset __local_per_cpu_offset
 
 #else /* ! SMP */
 
-#define real_setup_per_cpu_areas()		do { } while (0)
-
 #endif	/* SMP */
 
 #include <asm-generic/percpu.h>
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index 900d44714f8..be8d7aaeb60 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -86,6 +86,8 @@ extern int of_node_to_nid(struct device_node *dp);
 #endif
 
 extern void prom_build_devicetree(void);
+extern void of_populate_present_mask(void);
+extern void of_fill_in_cpu_data(void);
 
 /* Dummy ref counting routines - to be implemented later */
 static inline struct device_node *of_node_get(struct device_node *node)
diff --git a/arch/sparc/include/asm/trap_block.h b/arch/sparc/include/asm/trap_block.h
new file mode 100644
index 00000000000..7e26b2db621
--- /dev/null
+++ b/arch/sparc/include/asm/trap_block.h
@@ -0,0 +1,207 @@
+#ifndef _SPARC_TRAP_BLOCK_H
+#define _SPARC_TRAP_BLOCK_H
+
+#include <asm/hypervisor.h>
+#include <asm/asi.h>
+
+#ifndef __ASSEMBLY__
+
+/* Trap handling code needs to get at a few critical values upon
+ * trap entry and to process TSB misses.  These cannot be in the
+ * per_cpu() area as we really need to lock them into the TLB and
+ * thus make them part of the main kernel image.  As a result we
+ * try to make this as small as possible.
+ *
+ * This is padded out and aligned to 64-bytes to avoid false sharing
+ * on SMP.
+ */
+
+/* If you modify the size of this structure, please update
+ * TRAP_BLOCK_SZ_SHIFT below.
+ */
+struct thread_info;
+struct trap_per_cpu {
+/* D-cache line 1: Basic thread information, cpu and device mondo queues */
+	struct thread_info	*thread;
+	unsigned long		pgd_paddr;
+	unsigned long		cpu_mondo_pa;
+	unsigned long		dev_mondo_pa;
+
+/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
+	unsigned long		resum_mondo_pa;
+	unsigned long		resum_kernel_buf_pa;
+	unsigned long		nonresum_mondo_pa;
+	unsigned long		nonresum_kernel_buf_pa;
+
+/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
+	struct hv_fault_status	fault_info;
+
+/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
+	unsigned long		cpu_mondo_block_pa;
+	unsigned long		cpu_list_pa;
+	unsigned long		tsb_huge;
+	unsigned long		tsb_huge_temp;
+
+/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
+	unsigned long		irq_worklist_pa;
+	unsigned int		cpu_mondo_qmask;
+	unsigned int		dev_mondo_qmask;
+	unsigned int		resum_qmask;
+	unsigned int		nonresum_qmask;
+	unsigned long		__per_cpu_base;
+} __attribute__((aligned(64)));
+extern struct trap_per_cpu trap_block[NR_CPUS];
+extern void init_cur_cpu_trap(struct thread_info *);
+extern void setup_tba(void);
+extern int ncpus_probed;
+
+extern unsigned long real_hard_smp_processor_id(void);
+
+struct cpuid_patch_entry {
+	unsigned int	addr;
+	unsigned int	cheetah_safari[4];
+	unsigned int	cheetah_jbus[4];
+	unsigned int	starfire[4];
+	unsigned int	sun4v[4];
+};
+extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
+
+struct sun4v_1insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
+	__sun4v_1insn_patch_end;
+
+struct sun4v_2insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insns[2];
+};
+extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
+	__sun4v_2insn_patch_end;
+
+
+#endif /* !(__ASSEMBLY__) */
+
+#define TRAP_PER_CPU_THREAD		0x00
+#define TRAP_PER_CPU_PGD_PADDR		0x08
+#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
+#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
+#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
+#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
+#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
+#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
+#define TRAP_PER_CPU_FAULT_INFO		0x40
+#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
+#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
+#define TRAP_PER_CPU_TSB_HUGE		0xd0
+#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
+#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
+#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
+#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
+#define TRAP_PER_CPU_RESUM_QMASK	0xf0
+#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
+#define TRAP_PER_CPU_PER_CPU_BASE	0xf8
+
+#define TRAP_BLOCK_SZ_SHIFT		8
+
+#include <asm/scratchpad.h>
+
+#define __GET_CPUID(REG)				\
+	/* Spitfire implementation (default). */	\
+661:	ldxa		[%g0] ASI_UPA_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	 and		REG, 0x1f, REG;			\
+	nop;						\
+	.section	.cpuid_patch, "ax";		\
+	/* Instruction location. */			\
+	.word		661b;				\
+	/* Cheetah Safari implementation. */		\
+	ldxa		[%g0] ASI_SAFARI_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x3ff, REG;		\
+	nop;						\
+	/* Cheetah JBUS implementation. */		\
+	ldxa		[%g0] ASI_JBUS_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x1f, REG;			\
+	nop;						\
+	/* Starfire implementation. */			\
+	sethi		%hi(0x1fff40000d0 >> 9), REG;	\
+	sllx		REG, 9, REG;			\
+	or		REG, 0xd0, REG;			\
+	lduwa		[REG] ASI_PHYS_BYPASS_EC_E, REG;\
+	/* sun4v implementation. */			\
+	mov		SCRATCHPAD_CPUID, REG;		\
+	ldxa		[REG] ASI_SCRATCHPAD, REG;	\
+	nop;						\
+	nop;						\
+	.previous;
+
+#ifdef CONFIG_SMP
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	__GET_CPUID(TMP)			\
+	sethi	%hi(trap_block), DEST;		\
+	sllx	TMP, TRAP_BLOCK_SZ_SHIFT, TMP;	\
+	or	DEST, %lo(trap_block), DEST;	\
+	add	DEST, TMP, DEST;		\
+
+/* Clobbers TMP, current address space PGD phys address into DEST.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+/* Clobbers TMP, loads DEST with current thread info pointer.  */
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* Given the current thread info pointer in THR, load the per-cpu
+ * area base of the current processor into DEST.  REG1, REG2, and REG3 are
+ * clobbered.
+ *
+ * You absolutely cannot use DEST as a temporary in this code.  The
+ * reason is that traps can happen during execution, and return from
+ * trap will load the fully resolved DEST per-cpu base.  This can corrupt
+ * the calculations done by the macro mid-stream.
+ */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)	\
+	lduh	[THR + TI_CPU], REG1;			\
+	sethi	%hi(trap_block), REG2;			\
+	sllx	REG1, TRAP_BLOCK_SZ_SHIFT, REG1;	\
+	or	REG2, %lo(trap_block), REG2;		\
+	add	REG2, REG1, REG2;			\
+	ldx	[REG2 + TRAP_PER_CPU_PER_CPU_BASE], DEST;
+
+#else
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	sethi	%hi(trap_block), DEST;		\
+	or	DEST, %lo(trap_block), DEST;	\
+
+/* Uniprocessor versions, we know the cpuid is zero.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* _SPARC_TRAP_BLOCK_H */
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index b8eb71ef316..b2c406de7d4 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -394,8 +394,9 @@
 #define __NR_accept4		323
 #define __NR_preadv		324
 #define __NR_pwritev		325
+#define __NR_rt_tgsigqueueinfo	326
 
-#define NR_SYSCALLS		326
+#define NR_SYSCALLS		327
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 54742e58831..475ce4696ac 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -37,6 +37,7 @@ obj-y                   += una_asm_$(BITS).o
 obj-$(CONFIG_SPARC32)   += muldiv.o
 obj-y                   += prom_common.o
 obj-y                   += prom_$(BITS).o
+obj-y                   += of_device_common.o
 obj-y                   += of_device_$(BITS).o
 obj-$(CONFIG_SPARC64)   += prom_irqtrans.o
 
@@ -54,6 +55,7 @@ obj-$(CONFIG_SPARC64)   += sstate.o
 obj-$(CONFIG_SPARC64)   += mdesc.o
 obj-$(CONFIG_SPARC64)	+= pcr.o
 obj-$(CONFIG_SPARC64)	+= nmi.o
+obj-$(CONFIG_SPARC64_SMP) += cpumap.o
 
 # sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation
 obj-$(CONFIG_SPARC32)     += devres.o
diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c
new file mode 100644
index 00000000000..7430ed080b2
--- /dev/null
+++ b/arch/sparc/kernel/cpumap.c
@@ -0,0 +1,431 @@
+/* cpumap.c: used for optimizing CPU assignment
+ *
+ * Copyright (C) 2009 Hong H. Pham <hong.pham@windriver.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/spinlock.h>
+#include <asm/cpudata.h>
+#include "cpumap.h"
+
+
+enum {
+	CPUINFO_LVL_ROOT = 0,
+	CPUINFO_LVL_NODE,
+	CPUINFO_LVL_CORE,
+	CPUINFO_LVL_PROC,
+	CPUINFO_LVL_MAX,
+};
+
+enum {
+	ROVER_NO_OP              = 0,
+	/* Increment rover every time level is visited */
+	ROVER_INC_ON_VISIT       = 1 << 0,
+	/* Increment parent's rover every time rover wraps around */
+	ROVER_INC_PARENT_ON_LOOP = 1 << 1,
+};
+
+struct cpuinfo_node {
+	int id;
+	int level;
+	int num_cpus;    /* Number of CPUs in this hierarchy */
+	int parent_index;
+	int child_start; /* Array index of the first child node */
+	int child_end;   /* Array index of the last child node */
+	int rover;       /* Child node iterator */
+};
+
+struct cpuinfo_level {
+	int start_index; /* Index of first node of a level in a cpuinfo tree */
+	int end_index;   /* Index of last node of a level in a cpuinfo tree */
+	int num_nodes;   /* Number of nodes in a level in a cpuinfo tree */
+};
+
+struct cpuinfo_tree {
+	int total_nodes;
+
+	/* Offsets into nodes[] for each level of the tree */
+	struct cpuinfo_level level[CPUINFO_LVL_MAX];
+	struct cpuinfo_node  nodes[0];
+};
+
+
+static struct cpuinfo_tree *cpuinfo_tree;
+
+static u16 cpu_distribution_map[NR_CPUS];
+static DEFINE_SPINLOCK(cpu_map_lock);
+
+
+/* Niagara optimized cpuinfo tree traversal. */
+static const int niagara_iterate_method[] = {
+	[CPUINFO_LVL_ROOT] = ROVER_NO_OP,
+
+	/* Strands (or virtual CPUs) within a core may not run concurrently
+	 * on the Niagara, as instruction pipeline(s) are shared.  Distribute
+	 * work to strands in different cores first for better concurrency.
+	 * Go to next NUMA node when all cores are used.
+	 */
+	[CPUINFO_LVL_NODE] = ROVER_INC_ON_VISIT|ROVER_INC_PARENT_ON_LOOP,
+
+	/* Strands are grouped together by proc_id in cpuinfo_sparc, i.e.
+	 * a proc_id represents an instruction pipeline.  Distribute work to
+	 * strands in different proc_id groups if the core has multiple
+	 * instruction pipelines (e.g. the Niagara 2/2+ has two).
+	 */
+	[CPUINFO_LVL_CORE] = ROVER_INC_ON_VISIT,
+
+	/* Pick the next strand in the proc_id group. */
+	[CPUINFO_LVL_PROC] = ROVER_INC_ON_VISIT,
+};
+
+/* Generic cpuinfo tree traversal.  Distribute work round robin across NUMA
+ * nodes.
+ */
+static const int generic_iterate_method[] = {
+	[CPUINFO_LVL_ROOT] = ROVER_INC_ON_VISIT,
+	[CPUINFO_LVL_NODE] = ROVER_NO_OP,
+	[CPUINFO_LVL_CORE] = ROVER_INC_PARENT_ON_LOOP,
+	[CPUINFO_LVL_PROC] = ROVER_INC_ON_VISIT|ROVER_INC_PARENT_ON_LOOP,
+};
+
+
+static int cpuinfo_id(int cpu, int level)
+{
+	int id;
+
+	switch (level) {
+	case CPUINFO_LVL_ROOT:
+		id = 0;
+		break;
+	case CPUINFO_LVL_NODE:
+		id = cpu_to_node(cpu);
+		break;
+	case CPUINFO_LVL_CORE:
+		id = cpu_data(cpu).core_id;
+		break;
+	case CPUINFO_LVL_PROC:
+		id = cpu_data(cpu).proc_id;
+		break;
+	default:
+		id = -EINVAL;
+	}
+	return id;
+}
+
+/*
+ * Enumerate the CPU information in __cpu_data to determine the start index,
+ * end index, and number of nodes for each level in the cpuinfo tree.  The
+ * total number of cpuinfo nodes required to build the tree is returned.
+ */
+static int enumerate_cpuinfo_nodes(struct cpuinfo_level *tree_level)
+{
+	int prev_id[CPUINFO_LVL_MAX];
+	int i, n, num_nodes;
+
+	for (i = CPUINFO_LVL_ROOT; i < CPUINFO_LVL_MAX; i++) {
+		struct cpuinfo_level *lv = &tree_level[i];
+
+		prev_id[i] = -1;
+		lv->start_index = lv->end_index = lv->num_nodes = 0;
+	}
+
+	num_nodes = 1; /* Include the root node */
+
+	for (i = 0; i < num_possible_cpus(); i++) {
+		if (!cpu_online(i))
+			continue;
+
+		n = cpuinfo_id(i, CPUINFO_LVL_NODE);
+		if (n > prev_id[CPUINFO_LVL_NODE]) {
+			tree_level[CPUINFO_LVL_NODE].num_nodes++;
+			prev_id[CPUINFO_LVL_NODE] = n;
+			num_nodes++;
+		}
+		n = cpuinfo_id(i, CPUINFO_LVL_CORE);
+		if (n > prev_id[CPUINFO_LVL_CORE]) {
+			tree_level[CPUINFO_LVL_CORE].num_nodes++;
+			prev_id[CPUINFO_LVL_CORE] = n;
+			num_nodes++;
+		}
+		n = cpuinfo_id(i, CPUINFO_LVL_PROC);
+		if (n > prev_id[CPUINFO_LVL_PROC]) {
+			tree_level[CPUINFO_LVL_PROC].num_nodes++;
+			prev_id[CPUINFO_LVL_PROC] = n;
+			num_nodes++;
+		}
+	}
+
+	tree_level[CPUINFO_LVL_ROOT].num_nodes = 1;
+
+	n = tree_level[CPUINFO_LVL_NODE].num_nodes;
+	tree_level[CPUINFO_LVL_NODE].start_index = 1;
+	tree_level[CPUINFO_LVL_NODE].end_index   = n;
+
+	n++;
+	tree_level[CPUINFO_LVL_CORE].start_index = n;
+	n += tree_level[CPUINFO_LVL_CORE].num_nodes;
+	tree_level[CPUINFO_LVL_CORE].end_index   = n - 1;
+
+	tree_level[CPUINFO_LVL_PROC].start_index = n;
+	n += tree_level[CPUINFO_LVL_PROC].num_nodes;
+	tree_level[CPUINFO_LVL_PROC].end_index   = n - 1;
+
+	return num_nodes;
+}
+
+/* Build a tree representation of the CPU hierarchy using the per CPU
+ * information in __cpu_data.  Entries in __cpu_data[0..NR_CPUS] are
+ * assumed to be sorted in ascending order based on node, core_id, and
+ * proc_id (in order of significance).
+ */
+static struct cpuinfo_tree *build_cpuinfo_tree(void)
+{
+	struct cpuinfo_tree *new_tree;
+	struct cpuinfo_node *node;
+	struct cpuinfo_level tmp_level[CPUINFO_LVL_MAX];
+	int num_cpus[CPUINFO_LVL_MAX];
+	int level_rover[CPUINFO_LVL_MAX];
+	int prev_id[CPUINFO_LVL_MAX];
+	int n, id, cpu, prev_cpu, last_cpu, level;
+
+	n = enumerate_cpuinfo_nodes(tmp_level);
+
+	new_tree = kzalloc(sizeof(struct cpuinfo_tree) +
+	                   (sizeof(struct cpuinfo_node) * n), GFP_ATOMIC);
+	if (!new_tree)
+		return NULL;
+
+	new_tree->total_nodes = n;
+	memcpy(&new_tree->level, tmp_level, sizeof(tmp_level));
+
+	prev_cpu = cpu = first_cpu(cpu_online_map);
+
+	/* Initialize all levels in the tree with the first CPU */
+	for (level = CPUINFO_LVL_PROC; level >= CPUINFO_LVL_ROOT; level--) {
+		n = new_tree->level[level].start_index;
+
+		level_rover[level] = n;
+		node = &new_tree->nodes[n];
+
+		id = cpuinfo_id(cpu, level);
+		if (unlikely(id < 0)) {
+			kfree(new_tree);
+			return NULL;
+		}
+		node->id = id;
+		node->level = level;
+		node->num_cpus = 1;
+
+		node->parent_index = (level > CPUINFO_LVL_ROOT)
+		    ? new_tree->level[level - 1].start_index : -1;
+
+		node->child_start = node->child_end = node->rover =
+		    (level == CPUINFO_LVL_PROC)
+		    ? cpu : new_tree->level[level + 1].start_index;
+
+		prev_id[level] = node->id;
+		num_cpus[level] = 1;
+	}
+
+	for (last_cpu = (num_possible_cpus() - 1); last_cpu >= 0; last_cpu--) {
+		if (cpu_online(last_cpu))
+			break;
+	}
+
+	while (++cpu <= last_cpu) {
+		if (!cpu_online(cpu))
+			continue;
+
+		for (level = CPUINFO_LVL_PROC; level >= CPUINFO_LVL_ROOT;
+		     level--) {
+			id = cpuinfo_id(cpu, level);
+			if (unlikely(id < 0)) {
+				kfree(new_tree);
+				return NULL;
+			}
+
+			if ((id != prev_id[level]) || (cpu == last_cpu)) {
+				prev_id[level] = id;
+				node = &new_tree->nodes[level_rover[level]];
+				node->num_cpus = num_cpus[level];
+				num_cpus[level] = 1;
+
+				if (cpu == last_cpu)
+					node->num_cpus++;
+
+				/* Connect tree node to parent */
+				if (level == CPUINFO_LVL_ROOT)
+					node->parent_index = -1;
+				else
+					node->parent_index =
+					    level_rover[level - 1];
+
+				if (level == CPUINFO_LVL_PROC) {
+					node->child_end =
+					    (cpu == last_cpu) ? cpu : prev_cpu;
+				} else {
+					node->child_end =
+					    level_rover[level + 1] - 1;
+				}
+
+				/* Initialize the next node in the same level */
+				n = ++level_rover[level];
+				if (n <= new_tree->level[level].end_index) {
+					node = &new_tree->nodes[n];
+					node->id = id;
+					node->level = level;
+
+					/* Connect node to child */
+					node->child_start = node->child_end =
+					node->rover =
+					    (level == CPUINFO_LVL_PROC)
+					    ? cpu : level_rover[level + 1];
+				}
+			} else
+				num_cpus[level]++;
+		}
+		prev_cpu = cpu;
+	}
+
+	return new_tree;
+}
+
+static void increment_rover(struct cpuinfo_tree *t, int node_index,
+                            int root_index, const int *rover_inc_table)
+{
+	struct cpuinfo_node *node = &t->nodes[node_index];
+	int top_level, level;
+
+	top_level = t->nodes[root_index].level;
+	for (level = node->level; level >= top_level; level--) {
+		node->rover++;
+		if (node->rover <= node->child_end)
+			return;
+
+		node->rover = node->child_start;
+		/* If parent's rover does not need to be adjusted, stop here. */
+		if ((level == top_level) ||
+		    !(rover_inc_table[level] & ROVER_INC_PARENT_ON_LOOP))
+			return;
+
+		node = &t->nodes[node->parent_index];
+	}
+}
+
+static int iterate_cpu(struct cpuinfo_tree *t, unsigned int root_index)
+{
+	const int *rover_inc_table;
+	int level, new_index, index = root_index;
+
+	switch (sun4v_chip_type) {
+	case SUN4V_CHIP_NIAGARA1:
+	case SUN4V_CHIP_NIAGARA2:
+		rover_inc_table = niagara_iterate_method;
+		break;
+	default:
+		rover_inc_table = generic_iterate_method;
+	}
+
+	for (level = t->nodes[root_index].level; level < CPUINFO_LVL_MAX;
+	     level++) {
+		new_index = t->nodes[index].rover;
+		if (rover_inc_table[level] & ROVER_INC_ON_VISIT)
+			increment_rover(t, index, root_index, rover_inc_table);
+
+		index = new_index;
+	}
+	return index;
+}
+
+static void _cpu_map_rebuild(void)
+{
+	int i;
+
+	if (cpuinfo_tree) {
+		kfree(cpuinfo_tree);
+		cpuinfo_tree = NULL;
+	}
+
+	cpuinfo_tree = build_cpuinfo_tree();
+	if (!cpuinfo_tree)
+		return;
+
+	/* Build CPU distribution map that spans all online CPUs.  No need
+	 * to check if the CPU is online, as that is done when the cpuinfo
+	 * tree is being built.
+	 */
+	for (i = 0; i < cpuinfo_tree->nodes[0].num_cpus; i++)
+		cpu_distribution_map[i] = iterate_cpu(cpuinfo_tree, 0);
+}
+
+/* Fallback if the cpuinfo tree could not be built.  CPU mapping is linear
+ * round robin.
+ */
+static int simple_map_to_cpu(unsigned int index)
+{
+	int i, end, cpu_rover;
+
+	cpu_rover = 0;
+	end = index % num_online_cpus();
+	for (i = 0; i < num_possible_cpus(); i++) {
+		if (cpu_online(cpu_rover)) {
+			if (cpu_rover >= end)
+				return cpu_rover;
+
+			cpu_rover++;
+		}
+	}
+
+	/* Impossible, since num_online_cpus() <= num_possible_cpus() */
+	return first_cpu(cpu_online_map);
+}
+
+static int _map_to_cpu(unsigned int index)
+{
+	struct cpuinfo_node *root_node;
+
+	if (unlikely(!cpuinfo_tree)) {
+		_cpu_map_rebuild();
+		if (!cpuinfo_tree)
+			return simple_map_to_cpu(index);
+	}
+
+	root_node = &cpuinfo_tree->nodes[0];
+#ifdef CONFIG_HOTPLUG_CPU
+	if (unlikely(root_node->num_cpus != num_online_cpus())) {
+		_cpu_map_rebuild();
+		if (!cpuinfo_tree)
+			return simple_map_to_cpu(index);
+	}
+#endif
+	return cpu_distribution_map[index % root_node->num_cpus];
+}
+
+int map_to_cpu(unsigned int index)
+{
+	int mapped_cpu;
+	unsigned long flag;
+
+	spin_lock_irqsave(&cpu_map_lock, flag);
+	mapped_cpu = _map_to_cpu(index);
+
+#ifdef CONFIG_HOTPLUG_CPU
+	while (unlikely(!cpu_online(mapped_cpu)))
+		mapped_cpu = _map_to_cpu(index);
+#endif
+	spin_unlock_irqrestore(&cpu_map_lock, flag);
+	return mapped_cpu;
+}
+EXPORT_SYMBOL(map_to_cpu);
+
+void cpu_map_rebuild(void)
+{
+	unsigned long flag;
+
+	spin_lock_irqsave(&cpu_map_lock, flag);
+	_cpu_map_rebuild();
+	spin_unlock_irqrestore(&cpu_map_lock, flag);
+}
diff --git a/arch/sparc/kernel/cpumap.h b/arch/sparc/kernel/cpumap.h
new file mode 100644
index 00000000000..e639880ab86
--- /dev/null
+++ b/arch/sparc/kernel/cpumap.h
@@ -0,0 +1,16 @@
+#ifndef _CPUMAP_H
+#define _CPUMAP_H
+
+#ifdef CONFIG_SMP
+extern void cpu_map_rebuild(void);
+extern int  map_to_cpu(unsigned int index);
+#define cpu_map_init() cpu_map_rebuild()
+#else
+#define cpu_map_init() do {} while (0)
+static inline int map_to_cpu(unsigned int index)
+{
+	return raw_smp_processor_id();
+}
+#endif
+
+#endif
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index ebc8403b035..524c32f97c5 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -35,8 +35,8 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 }
 EXPORT_SYMBOL(dma_set_mask);
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t flag)
+static void *dma32_alloc_coherent(struct device *dev, size_t size,
+				  dma_addr_t *dma_handle, gfp_t flag)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -44,10 +44,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 #endif
 	return sbus_alloc_consistent(dev, size, dma_handle);
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *cpu_addr, dma_addr_t dma_handle)
+static void dma32_free_coherent(struct device *dev, size_t size,
+				void *cpu_addr, dma_addr_t dma_handle)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -58,38 +57,10 @@ void dma_free_coherent(struct device *dev, size_t size,
 #endif
 	sbus_free_consistent(dev, size, cpu_addr, dma_handle);
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
-dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-			  size_t size, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_map_single(to_pci_dev(dev), cpu_addr,
-				      size, (int)direction);
-#endif
-	return sbus_map_single(dev, cpu_addr, size, (int)direction);
-}
-EXPORT_SYMBOL(dma_map_single);
-
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-		      size_t size,
-		      enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_unmap_single(to_pci_dev(dev), dma_addr,
-				 size, (int)direction);
-		return;
-	}
-#endif
-	sbus_unmap_single(dev, dma_addr, size, (int)direction);
-}
-EXPORT_SYMBOL(dma_unmap_single);
-
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			unsigned long offset, size_t size,
-			enum dma_data_direction direction)
+static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -99,10 +70,9 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	return sbus_map_single(dev, page_address(page) + offset,
 			       size, (int)direction);
 }
-EXPORT_SYMBOL(dma_map_page);
 
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-		    size_t size, enum dma_data_direction direction)
+static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
+			     size_t size, enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -113,10 +83,9 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 #endif
 	sbus_unmap_single(dev, dma_address, size, (int)direction);
 }
-EXPORT_SYMBOL(dma_unmap_page);
 
-int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
+static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
+			int nents, enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -124,10 +93,9 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg,
 #endif
 	return sbus_map_sg(dev, sg, nents, direction);
 }
-EXPORT_SYMBOL(dma_map_sg);
 
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-		  int nents, enum dma_data_direction direction)
+void dma32_unmap_sg(struct device *dev, struct scatterlist *sg,
+		    int nents, enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -137,10 +105,10 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 #endif
 	sbus_unmap_sg(dev, sg, nents, (int)direction);
 }
-EXPORT_SYMBOL(dma_unmap_sg);
 
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			     size_t size, enum dma_data_direction direction)
+static void dma32_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				      size_t size,
+				      enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -151,10 +119,10 @@ void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
 #endif
 	sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
 }
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
 
-void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-				size_t size, enum dma_data_direction direction)
+static void dma32_sync_single_for_device(struct device *dev,
+					 dma_addr_t dma_handle, size_t size,
+					 enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -165,28 +133,9 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
 #endif
 	sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
 }
-EXPORT_SYMBOL(dma_sync_single_for_device);
-
-void dma_sync_single_range_for_cpu(struct device *dev,
-				   dma_addr_t dma_handle,
-				   unsigned long offset,
-				   size_t size,
-				   enum dma_data_direction direction)
-{
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-}
-EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
-
-void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
-}
-EXPORT_SYMBOL(dma_sync_single_range_for_device);
 
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-			 int nelems, enum dma_data_direction direction)
+static void dma32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+				  int nelems, enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -197,11 +146,10 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 #endif
 	BUG();
 }
-EXPORT_SYMBOL(dma_sync_sg_for_cpu);
 
-void dma_sync_sg_for_device(struct device *dev,
-			    struct scatterlist *sg, int nelems,
-			    enum dma_data_direction direction)
+static void dma32_sync_sg_for_device(struct device *dev,
+				     struct scatterlist *sg, int nelems,
+				     enum dma_data_direction direction)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -212,16 +160,19 @@ void dma_sync_sg_for_device(struct device *dev,
 #endif
 	BUG();
 }
-EXPORT_SYMBOL(dma_sync_sg_for_device);
 
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return (dma_addr == DMA_ERROR_CODE);
-}
-EXPORT_SYMBOL(dma_mapping_error);
-
-int dma_get_cache_alignment(void)
-{
-	return 32;
-}
-EXPORT_SYMBOL(dma_get_cache_alignment);
+static const struct dma_ops dma32_dma_ops = {
+	.alloc_coherent		= dma32_alloc_coherent,
+	.free_coherent		= dma32_free_coherent,
+	.map_page		= dma32_map_page,
+	.unmap_page		= dma32_unmap_page,
+	.map_sg			= dma32_map_sg,
+	.unmap_sg		= dma32_unmap_sg,
+	.sync_single_for_cpu	= dma32_sync_single_for_cpu,
+	.sync_single_for_device	= dma32_sync_single_for_device,
+	.sync_sg_for_cpu	= dma32_sync_sg_for_cpu,
+	.sync_sg_for_device	= dma32_sync_sg_for_device,
+};
+
+const struct dma_ops *dma_ops = &dma32_dma_ops;
+EXPORT_SYMBOL(dma_ops);
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 90350f838f0..4a700f4b79c 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -544,7 +544,8 @@ static int __cpuinit dr_cpu_configure(struct ds_info *dp,
 			     resp_len, ncpus, mask,
 			     DR_CPU_STAT_CONFIGURED);
 
-	mdesc_fill_in_cpu_data(*mask);
+	mdesc_populate_present_mask(mask);
+	mdesc_fill_in_cpu_data(mask);
 
 	for_each_cpu_mask(cpu, *mask) {
 		int err;
diff --git a/arch/sparc/kernel/ftrace.c b/arch/sparc/kernel/ftrace.c
index d0218e73f98..d3b1a307656 100644
--- a/arch/sparc/kernel/ftrace.c
+++ b/arch/sparc/kernel/ftrace.c
@@ -7,14 +7,10 @@
 
 #include <asm/ftrace.h>
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 static const u32 ftrace_nop = 0x01000000;
 
-unsigned char *ftrace_nop_replace(void)
-{
-	return (char *)&ftrace_nop;
-}
-
-unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+static u32 ftrace_call_replace(unsigned long ip, unsigned long addr)
 {
 	static u32 call;
 	s32 off;
@@ -22,15 +18,11 @@ unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
 	off = ((s32)addr - (s32)ip);
 	call = 0x40000000 | ((u32)off >> 2);
 
-	return (unsigned char *) &call;
+	return call;
 }
 
-int
-ftrace_modify_code(unsigned long ip, unsigned char *old_code,
-		   unsigned char *new_code)
+static int ftrace_modify_code(unsigned long ip, u32 old, u32 new)
 {
-	u32 old = *(u32 *)old_code;
-	u32 new = *(u32 *)new_code;
 	u32 replaced;
 	int faulted;
 
@@ -59,18 +51,43 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	return faulted;
 }
 
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	u32 old, new;
+
+	old = ftrace_call_replace(ip, addr);
+	new = ftrace_nop;
+	return ftrace_modify_code(ip, old, new);
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	u32 old, new;
+
+	old = ftrace_nop;
+	new = ftrace_call_replace(ip, addr);
+	return ftrace_modify_code(ip, old, new);
+}
+
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
 	unsigned long ip = (unsigned long)(&ftrace_call);
-	unsigned char old[MCOUNT_INSN_SIZE], *new;
+	u32 old, new;
 
-	memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
+	old = *(u32 *) &ftrace_call;
 	new = ftrace_call_replace(ip, (unsigned long)func);
 	return ftrace_modify_code(ip, old, new);
 }
 
 int __init ftrace_dyn_arch_init(void *data)
 {
-	ftrace_mcount_set(data);
+	unsigned long *p = data;
+
+	*p = 0;
+
 	return 0;
 }
+#endif
+
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index 91bf4c7f79b..f8f21050448 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -641,28 +641,6 @@ tlb_fixup_done:
 	/* Not reached... */
 
 1:
-	/* If we boot on a non-zero cpu, all of the per-cpu
-	 * variable references we make before setting up the
-	 * per-cpu areas will use a bogus offset.  Put a
-	 * compensating factor into __per_cpu_base to handle
-	 * this cleanly.
-	 *
-	 * What the per-cpu code calculates is:
-	 *
-	 *	__per_cpu_base + (cpu << __per_cpu_shift)
-	 *
-	 * These two variables are zero initially, so to
-	 * make it all cancel out to zero we need to put
-	 * "0 - (cpu << 0)" into __per_cpu_base so that the
-	 * above formula evaluates to zero.
-	 *
-	 * We cannot even perform a printk() until this stuff
-	 * is setup as that calls cpu_clock() which uses
-	 * per-cpu variables.
-	 */
-	sub	%g0, %o0, %o1
-	sethi	%hi(__per_cpu_base), %o2
-	stx	%o1, [%o2 + %lo(__per_cpu_base)]
 #else
 	mov	0, %o0
 #endif
diff --git a/arch/sparc/kernel/init_task.c b/arch/sparc/kernel/init_task.c
index f28cb8278e9..28125c5b3d3 100644
--- a/arch/sparc/kernel/init_task.c
+++ b/arch/sparc/kernel/init_task.c
@@ -10,10 +10,7 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
 struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_mm);
 EXPORT_SYMBOL(init_task);
 
 /* .text section in head.S is aligned at 8k boundary and this gets linked
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index d8900e1d5aa..0aeaefe696b 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -351,8 +351,9 @@ static void dma_4u_free_coherent(struct device *dev, size_t size,
 		free_pages((unsigned long)cpu, order);
 }
 
-static dma_addr_t dma_4u_map_single(struct device *dev, void *ptr, size_t sz,
-				    enum dma_data_direction direction)
+static dma_addr_t dma_4u_map_page(struct device *dev, struct page *page,
+				  unsigned long offset, size_t sz,
+				  enum dma_data_direction direction)
 {
 	struct iommu *iommu;
 	struct strbuf *strbuf;
@@ -368,7 +369,7 @@ static dma_addr_t dma_4u_map_single(struct device *dev, void *ptr, size_t sz,
 	if (unlikely(direction == DMA_NONE))
 		goto bad_no_ctx;
 
-	oaddr = (unsigned long)ptr;
+	oaddr = (unsigned long)(page_address(page) + offset);
 	npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK);
 	npages >>= IO_PAGE_SHIFT;
 
@@ -472,8 +473,8 @@ do_flush_sync:
 		       vaddr, ctx, npages);
 }
 
-static void dma_4u_unmap_single(struct device *dev, dma_addr_t bus_addr,
-				size_t sz, enum dma_data_direction direction)
+static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
+			      size_t sz, enum dma_data_direction direction)
 {
 	struct iommu *iommu;
 	struct strbuf *strbuf;
@@ -824,8 +825,8 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
 static const struct dma_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
-	.map_single		= dma_4u_map_single,
-	.unmap_single		= dma_4u_unmap_single,
+	.map_page		= dma_4u_map_page,
+	.unmap_page		= dma_4u_unmap_page,
 	.map_sg			= dma_4u_map_sg,
 	.unmap_sg		= dma_4u_unmap_sg,
 	.sync_single_for_cpu	= dma_4u_sync_single_for_cpu,
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index e5e78f9cfc9..bd075054942 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -45,6 +45,7 @@
 #include <asm/cacheflush.h>
 
 #include "entry.h"
+#include "cpumap.h"
 
 #define NUM_IVECS	(IMAP_INR + 1)
 
@@ -256,35 +257,13 @@ static int irq_choose_cpu(unsigned int virt_irq)
 	int cpuid;
 
 	cpumask_copy(&mask, irq_desc[virt_irq].affinity);
-	if (cpus_equal(mask, CPU_MASK_ALL)) {
-		static int irq_rover;
-		static DEFINE_SPINLOCK(irq_rover_lock);
-		unsigned long flags;
-
-		/* Round-robin distribution... */
-	do_round_robin:
-		spin_lock_irqsave(&irq_rover_lock, flags);
-
-		while (!cpu_online(irq_rover)) {
-			if (++irq_rover >= nr_cpu_ids)
-				irq_rover = 0;
-		}
-		cpuid = irq_rover;
-		do {
-			if (++irq_rover >= nr_cpu_ids)
-				irq_rover = 0;
-		} while (!cpu_online(irq_rover));
-
-		spin_unlock_irqrestore(&irq_rover_lock, flags);
+	if (cpus_equal(mask, cpu_online_map)) {
+		cpuid = map_to_cpu(virt_irq);
 	} else {
 		cpumask_t tmp;
 
 		cpus_and(tmp, cpu_online_map, mask);
-
-		if (cpus_empty(tmp))
-			goto do_round_robin;
-
-		cpuid = first_cpu(tmp);
+		cpuid = cpus_empty(tmp) ? map_to_cpu(virt_irq) : first_cpu(tmp);
 	}
 
 	return cpuid;
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index f0e6ed23a46..938da19dc06 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -574,7 +574,7 @@ static void __init report_platform_properties(void)
 	mdesc_release(hp);
 }
 
-static void __devinit fill_in_one_cache(cpuinfo_sparc *c,
+static void __cpuinit fill_in_one_cache(cpuinfo_sparc *c,
 					struct mdesc_handle *hp,
 					u64 mp)
 {
@@ -619,8 +619,7 @@ static void __devinit fill_in_one_cache(cpuinfo_sparc *c,
 	}
 }
 
-static void __devinit mark_core_ids(struct mdesc_handle *hp, u64 mp,
-				    int core_id)
+static void __cpuinit mark_core_ids(struct mdesc_handle *hp, u64 mp, int core_id)
 {
 	u64 a;
 
@@ -653,7 +652,7 @@ static void __devinit mark_core_ids(struct mdesc_handle *hp, u64 mp,
 	}
 }
 
-static void __devinit set_core_ids(struct mdesc_handle *hp)
+static void __cpuinit set_core_ids(struct mdesc_handle *hp)
 {
 	int idx;
 	u64 mp;
@@ -678,8 +677,7 @@ static void __devinit set_core_ids(struct mdesc_handle *hp)
 	}
 }
 
-static void __devinit mark_proc_ids(struct mdesc_handle *hp, u64 mp,
-				    int proc_id)
+static void __cpuinit mark_proc_ids(struct mdesc_handle *hp, u64 mp, int proc_id)
 {
 	u64 a;
 
@@ -698,8 +696,7 @@ static void __devinit mark_proc_ids(struct mdesc_handle *hp, u64 mp,
 	}
 }
 
-static void __devinit __set_proc_ids(struct mdesc_handle *hp,
-				     const char *exec_unit_name)
+static void __cpuinit __set_proc_ids(struct mdesc_handle *hp, const char *exec_unit_name)
 {
 	int idx;
 	u64 mp;
@@ -720,13 +717,13 @@ static void __devinit __set_proc_ids(struct mdesc_handle *hp,
 	}
 }
 
-static void __devinit set_proc_ids(struct mdesc_handle *hp)
+static void __cpuinit set_proc_ids(struct mdesc_handle *hp)
 {
 	__set_proc_ids(hp, "exec_unit");
 	__set_proc_ids(hp, "exec-unit");
 }
 
-static void __devinit get_one_mondo_bits(const u64 *p, unsigned int *mask,
+static void __cpuinit get_one_mondo_bits(const u64 *p, unsigned int *mask,
 					 unsigned char def)
 {
 	u64 val;
@@ -745,7 +742,7 @@ use_default:
 	*mask = ((1U << def) * 64U) - 1U;
 }
 
-static void __devinit get_mondo_data(struct mdesc_handle *hp, u64 mp,
+static void __cpuinit get_mondo_data(struct mdesc_handle *hp, u64 mp,
 				     struct trap_per_cpu *tb)
 {
 	const u64 *val;
@@ -763,23 +760,15 @@ static void __devinit get_mondo_data(struct mdesc_handle *hp, u64 mp,
 	get_one_mondo_bits(val, &tb->nonresum_qmask, 2);
 }
 
-void __cpuinit mdesc_fill_in_cpu_data(cpumask_t mask)
+static void * __cpuinit mdesc_iterate_over_cpus(void *(*func)(struct mdesc_handle *, u64, int, void *), void *arg, cpumask_t *mask)
 {
 	struct mdesc_handle *hp = mdesc_grab();
+	void *ret = NULL;
 	u64 mp;
 
-	ncpus_probed = 0;
 	mdesc_for_each_node_by_name(hp, mp, "cpu") {
 		const u64 *id = mdesc_get_property(hp, mp, "id", NULL);
-		const u64 *cfreq = mdesc_get_property(hp, mp, "clock-frequency", NULL);
-		struct trap_per_cpu *tb;
-		cpuinfo_sparc *c;
-		int cpuid;
-		u64 a;
-
-		ncpus_probed++;
-
-		cpuid = *id;
+		int cpuid = *id;
 
 #ifdef CONFIG_SMP
 		if (cpuid >= NR_CPUS) {
@@ -788,62 +777,104 @@ void __cpuinit mdesc_fill_in_cpu_data(cpumask_t mask)
 			       cpuid, NR_CPUS);
 			continue;
 		}
-		if (!cpu_isset(cpuid, mask))
+		if (!cpu_isset(cpuid, *mask))
 			continue;
-#else
-		/* On uniprocessor we only want the values for the
-		 * real physical cpu the kernel booted onto, however
-		 * cpu_data() only has one entry at index 0.
-		 */
-		if (cpuid != real_hard_smp_processor_id())
-			continue;
-		cpuid = 0;
 #endif
 
-		c = &cpu_data(cpuid);
-		c->clock_tick = *cfreq;
+		ret = func(hp, mp, cpuid, arg);
+		if (ret)
+			goto out;
+	}
+out:
+	mdesc_release(hp);
+	return ret;
+}
 
-		tb = &trap_block[cpuid];
-		get_mondo_data(hp, mp, tb);
+static void * __cpuinit record_one_cpu(struct mdesc_handle *hp, u64 mp, int cpuid, void *arg)
+{
+	ncpus_probed++;
+#ifdef CONFIG_SMP
+	set_cpu_present(cpuid, true);
+#endif
+	return NULL;
+}
 
-		mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) {
-			u64 j, t = mdesc_arc_target(hp, a);
-			const char *t_name;
+void __cpuinit mdesc_populate_present_mask(cpumask_t *mask)
+{
+	if (tlb_type != hypervisor)
+		return;
 
-			t_name = mdesc_node_name(hp, t);
-			if (!strcmp(t_name, "cache")) {
-				fill_in_one_cache(c, hp, t);
-				continue;
-			}
+	ncpus_probed = 0;
+	mdesc_iterate_over_cpus(record_one_cpu, NULL, mask);
+}
 
-			mdesc_for_each_arc(j, hp, t, MDESC_ARC_TYPE_FWD) {
-				u64 n = mdesc_arc_target(hp, j);
-				const char *n_name;
+static void * __cpuinit fill_in_one_cpu(struct mdesc_handle *hp, u64 mp, int cpuid, void *arg)
+{
+	const u64 *cfreq = mdesc_get_property(hp, mp, "clock-frequency", NULL);
+	struct trap_per_cpu *tb;
+	cpuinfo_sparc *c;
+	u64 a;
 
-				n_name = mdesc_node_name(hp, n);
-				if (!strcmp(n_name, "cache"))
-					fill_in_one_cache(c, hp, n);
-			}
+#ifndef CONFIG_SMP
+	/* On uniprocessor we only want the values for the
+	 * real physical cpu the kernel booted onto, however
+	 * cpu_data() only has one entry at index 0.
+	 */
+	if (cpuid != real_hard_smp_processor_id())
+		return NULL;
+	cpuid = 0;
+#endif
+
+	c = &cpu_data(cpuid);
+	c->clock_tick = *cfreq;
+
+	tb = &trap_block[cpuid];
+	get_mondo_data(hp, mp, tb);
+
+	mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) {
+		u64 j, t = mdesc_arc_target(hp, a);
+		const char *t_name;
+
+		t_name = mdesc_node_name(hp, t);
+		if (!strcmp(t_name, "cache")) {
+			fill_in_one_cache(c, hp, t);
+			continue;
 		}
 
-#ifdef CONFIG_SMP
-		cpu_set(cpuid, cpu_present_map);
-#endif
+		mdesc_for_each_arc(j, hp, t, MDESC_ARC_TYPE_FWD) {
+			u64 n = mdesc_arc_target(hp, j);
+			const char *n_name;
 
-		c->core_id = 0;
-		c->proc_id = -1;
+			n_name = mdesc_node_name(hp, n);
+			if (!strcmp(n_name, "cache"))
+				fill_in_one_cache(c, hp, n);
+		}
 	}
 
+	c->core_id = 0;
+	c->proc_id = -1;
+
+	return NULL;
+}
+
+void __cpuinit mdesc_fill_in_cpu_data(cpumask_t *mask)
+{
+	struct mdesc_handle *hp;
+
+	mdesc_iterate_over_cpus(fill_in_one_cpu, NULL, mask);
+
 #ifdef CONFIG_SMP
 	sparc64_multi_core = 1;
 #endif
 
+	hp = mdesc_grab();
+
 	set_core_ids(hp);
 	set_proc_ids(hp);
 
-	smp_fill_in_sib_core_maps();
-
 	mdesc_release(hp);
+
+	smp_fill_in_sib_core_maps();
 }
 
 static ssize_t mdesc_read(struct file *file, char __user *buf,
@@ -887,7 +918,6 @@ void __init sun4v_mdesc_init(void)
 {
 	struct mdesc_handle *hp;
 	unsigned long len, real_len, status;
-	cpumask_t mask;
 
 	(void) sun4v_mach_desc(0UL, 0UL, &len);
 
@@ -911,7 +941,4 @@ void __init sun4v_mdesc_init(void)
 	cur_mdesc = hp;
 
 	report_platform_properties();
-
-	cpus_setall(mask);
-	mdesc_fill_in_cpu_data(mask);
 }
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index c8f14c1dc52..90396702ea2 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -6,159 +6,11 @@
 #include <linux/mod_devicetable.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
+#include <linux/irq.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 
-static int node_match(struct device *dev, void *data)
-{
-	struct of_device *op = to_of_device(dev);
-	struct device_node *dp = data;
-
-	return (op->node == dp);
-}
-
-struct of_device *of_find_device_by_node(struct device_node *dp)
-{
-	struct device *dev = bus_find_device(&of_platform_bus_type, NULL,
-					     dp, node_match);
-
-	if (dev)
-		return to_of_device(dev);
-
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_node);
-
-unsigned int irq_of_parse_and_map(struct device_node *node, int index)
-{
-	struct of_device *op = of_find_device_by_node(node);
-
-	if (!op || index >= op->num_irqs)
-		return 0;
-
-	return op->irqs[index];
-}
-EXPORT_SYMBOL(irq_of_parse_and_map);
-
-/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
- * BUS and propagate to all child of_device objects.
- */
-void of_propagate_archdata(struct of_device *bus)
-{
-	struct dev_archdata *bus_sd = &bus->dev.archdata;
-	struct device_node *bus_dp = bus->node;
-	struct device_node *dp;
-
-	for (dp = bus_dp->child; dp; dp = dp->sibling) {
-		struct of_device *op = of_find_device_by_node(dp);
-
-		op->dev.archdata.iommu = bus_sd->iommu;
-		op->dev.archdata.stc = bus_sd->stc;
-		op->dev.archdata.host_controller = bus_sd->host_controller;
-		op->dev.archdata.numa_node = bus_sd->numa_node;
-
-		if (dp->child)
-			of_propagate_archdata(op);
-	}
-}
-
-struct bus_type of_platform_bus_type;
-EXPORT_SYMBOL(of_platform_bus_type);
-
-static inline u64 of_read_addr(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-static void __init get_cells(struct device_node *dp,
-			     int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = of_n_addr_cells(dp);
-	if (sizec)
-		*sizec = of_n_size_cells(dp);
-}
-
-/* Max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-
-struct of_bus {
-	const char	*name;
-	const char	*addr_prop_name;
-	int		(*match)(struct device_node *parent);
-	void		(*count_cells)(struct device_node *child,
-				       int *addrc, int *sizec);
-	int		(*map)(u32 *addr, const u32 *range,
-			       int na, int ns, int pna);
-	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
-};
-
-/*
- * Default translator (generic bus)
- */
-
-static void of_bus_default_count_cells(struct device_node *dev,
-				       int *addrc, int *sizec)
-{
-	get_cells(dev, addrc, sizec);
-}
-
-/* Make sure the least significant 64-bits are in-range.  Even
- * for 3 or 4 cell values it is a good enough approximation.
- */
-static int of_out_of_range(const u32 *addr, const u32 *base,
-			   const u32 *size, int na, int ns)
-{
-	u64 a = of_read_addr(addr, na);
-	u64 b = of_read_addr(base, na);
-
-	if (a < b)
-		return 1;
-
-	b += of_read_addr(size, ns);
-	if (a >= b)
-		return 1;
-
-	return 0;
-}
-
-static int of_bus_default_map(u32 *addr, const u32 *range,
-			      int na, int ns, int pna)
-{
-	u32 result[OF_MAX_ADDR_CELLS];
-	int i;
-
-	if (ns > 2) {
-		printk("of_device: Cannot handle size cells (%d) > 2.", ns);
-		return -EINVAL;
-	}
-
-	if (of_out_of_range(addr, range, range + na + pna, na, ns))
-		return -EINVAL;
-
-	/* Start with the parent range base.  */
-	memcpy(result, range + na, pna * 4);
-
-	/* Add in the child address offset.  */
-	for (i = 0; i < na; i++)
-		result[pna - 1 - i] +=
-			(addr[na - 1 - i] -
-			 range[na - 1 - i]);
-
-	memcpy(addr, result, pna * 4);
-
-	return 0;
-}
-
-static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
-{
-	if (flags)
-		return flags;
-	return IORESOURCE_MEM;
-}
+#include "of_device_common.h"
 
 /*
  * PCI bus specific translator
@@ -240,47 +92,6 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 	return flags;
 }
 
-/*
- * SBUS bus specific translator
- */
-
-static int of_bus_sbus_match(struct device_node *np)
-{
-	struct device_node *dp = np;
-
-	while (dp) {
-		if (!strcmp(dp->name, "sbus") ||
-		    !strcmp(dp->name, "sbi"))
-			return 1;
-
-		/* Have a look at use_1to1_mapping().  We're trying
-		 * to match SBUS if that's the top-level bus and we
-		 * don't have some intervening real bus that provides
-		 * ranges based translations.
-		 */
-		if (of_find_property(dp, "ranges", NULL) != NULL)
-			break;
-
-		dp = dp->parent;
-	}
-
-	return 0;
-}
-
-static void of_bus_sbus_count_cells(struct device_node *child,
-				   int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 2;
-	if (sizec)
-		*sizec = 1;
-}
-
-static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
-{
-	return of_bus_default_map(addr, range, na, ns, pna);
-}
-
 static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 {
 	return IORESOURCE_MEM;
@@ -307,7 +118,7 @@ static struct of_bus of_busses[] = {
 		.addr_prop_name = "reg",
 		.match = of_bus_sbus_match,
 		.count_cells = of_bus_sbus_count_cells,
-		.map = of_bus_sbus_map,
+		.map = of_bus_default_map,
 		.get_flags = of_bus_sbus_get_flags,
 	},
 	/* Default */
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 5ac287ac03d..881947e59e9 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -10,6 +10,8 @@
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 
+#include "of_device_common.h"
+
 void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name)
 {
 	unsigned long ret = res->start + offset;
@@ -35,156 +37,6 @@ void of_iounmap(struct resource *res, void __iomem *base, unsigned long size)
 }
 EXPORT_SYMBOL(of_iounmap);
 
-static int node_match(struct device *dev, void *data)
-{
-	struct of_device *op = to_of_device(dev);
-	struct device_node *dp = data;
-
-	return (op->node == dp);
-}
-
-struct of_device *of_find_device_by_node(struct device_node *dp)
-{
-	struct device *dev = bus_find_device(&of_platform_bus_type, NULL,
-					     dp, node_match);
-
-	if (dev)
-		return to_of_device(dev);
-
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_node);
-
-unsigned int irq_of_parse_and_map(struct device_node *node, int index)
-{
-	struct of_device *op = of_find_device_by_node(node);
-
-	if (!op || index >= op->num_irqs)
-		return 0;
-
-	return op->irqs[index];
-}
-EXPORT_SYMBOL(irq_of_parse_and_map);
-
-/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
- * BUS and propagate to all child of_device objects.
- */
-void of_propagate_archdata(struct of_device *bus)
-{
-	struct dev_archdata *bus_sd = &bus->dev.archdata;
-	struct device_node *bus_dp = bus->node;
-	struct device_node *dp;
-
-	for (dp = bus_dp->child; dp; dp = dp->sibling) {
-		struct of_device *op = of_find_device_by_node(dp);
-
-		op->dev.archdata.iommu = bus_sd->iommu;
-		op->dev.archdata.stc = bus_sd->stc;
-		op->dev.archdata.host_controller = bus_sd->host_controller;
-		op->dev.archdata.numa_node = bus_sd->numa_node;
-
-		if (dp->child)
-			of_propagate_archdata(op);
-	}
-}
-
-struct bus_type of_platform_bus_type;
-EXPORT_SYMBOL(of_platform_bus_type);
-
-static inline u64 of_read_addr(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-static void get_cells(struct device_node *dp, int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = of_n_addr_cells(dp);
-	if (sizec)
-		*sizec = of_n_size_cells(dp);
-}
-
-/* Max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-
-struct of_bus {
-	const char	*name;
-	const char	*addr_prop_name;
-	int		(*match)(struct device_node *parent);
-	void		(*count_cells)(struct device_node *child,
-				       int *addrc, int *sizec);
-	int		(*map)(u32 *addr, const u32 *range,
-			       int na, int ns, int pna);
-	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
-};
-
-/*
- * Default translator (generic bus)
- */
-
-static void of_bus_default_count_cells(struct device_node *dev,
-				       int *addrc, int *sizec)
-{
-	get_cells(dev, addrc, sizec);
-}
-
-/* Make sure the least significant 64-bits are in-range.  Even
- * for 3 or 4 cell values it is a good enough approximation.
- */
-static int of_out_of_range(const u32 *addr, const u32 *base,
-			   const u32 *size, int na, int ns)
-{
-	u64 a = of_read_addr(addr, na);
-	u64 b = of_read_addr(base, na);
-
-	if (a < b)
-		return 1;
-
-	b += of_read_addr(size, ns);
-	if (a >= b)
-		return 1;
-
-	return 0;
-}
-
-static int of_bus_default_map(u32 *addr, const u32 *range,
-			      int na, int ns, int pna)
-{
-	u32 result[OF_MAX_ADDR_CELLS];
-	int i;
-
-	if (ns > 2) {
-		printk("of_device: Cannot handle size cells (%d) > 2.", ns);
-		return -EINVAL;
-	}
-
-	if (of_out_of_range(addr, range, range + na + pna, na, ns))
-		return -EINVAL;
-
-	/* Start with the parent range base.  */
-	memcpy(result, range + na, pna * 4);
-
-	/* Add in the child address offset.  */
-	for (i = 0; i < na; i++)
-		result[pna - 1 - i] +=
-			(addr[na - 1 - i] -
-			 range[na - 1 - i]);
-
-	memcpy(addr, result, pna * 4);
-
-	return 0;
-}
-
-static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
-{
-	if (flags)
-		return flags;
-	return IORESOURCE_MEM;
-}
-
 /*
  * PCI bus specific translator
  */
@@ -295,42 +147,6 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 }
 
 /*
- * SBUS bus specific translator
- */
-
-static int of_bus_sbus_match(struct device_node *np)
-{
-	struct device_node *dp = np;
-
-	while (dp) {
-		if (!strcmp(dp->name, "sbus") ||
-		    !strcmp(dp->name, "sbi"))
-			return 1;
-
-		/* Have a look at use_1to1_mapping().  We're trying
-		 * to match SBUS if that's the top-level bus and we
-		 * don't have some intervening real bus that provides
-		 * ranges based translations.
-		 */
-		if (of_find_property(dp, "ranges", NULL) != NULL)
-			break;
-
-		dp = dp->parent;
-	}
-
-	return 0;
-}
-
-static void of_bus_sbus_count_cells(struct device_node *child,
-				   int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 2;
-	if (sizec)
-		*sizec = 1;
-}
-
-/*
  * FHC/Central bus specific translator.
  *
  * This is just needed to hard-code the address and size cell
diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c
new file mode 100644
index 00000000000..cb8eb799bb6
--- /dev/null
+++ b/arch/sparc/kernel/of_device_common.c
@@ -0,0 +1,174 @@
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include "of_device_common.h"
+
+static int node_match(struct device *dev, void *data)
+{
+	struct of_device *op = to_of_device(dev);
+	struct device_node *dp = data;
+
+	return (op->node == dp);
+}
+
+struct of_device *of_find_device_by_node(struct device_node *dp)
+{
+	struct device *dev = bus_find_device(&of_platform_bus_type, NULL,
+					     dp, node_match);
+
+	if (dev)
+		return to_of_device(dev);
+
+	return NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_node);
+
+unsigned int irq_of_parse_and_map(struct device_node *node, int index)
+{
+	struct of_device *op = of_find_device_by_node(node);
+
+	if (!op || index >= op->num_irqs)
+		return 0;
+
+	return op->irqs[index];
+}
+EXPORT_SYMBOL(irq_of_parse_and_map);
+
+/* Take the archdata values for IOMMU, STC, and HOSTDATA found in
+ * BUS and propagate to all child of_device objects.
+ */
+void of_propagate_archdata(struct of_device *bus)
+{
+	struct dev_archdata *bus_sd = &bus->dev.archdata;
+	struct device_node *bus_dp = bus->node;
+	struct device_node *dp;
+
+	for (dp = bus_dp->child; dp; dp = dp->sibling) {
+		struct of_device *op = of_find_device_by_node(dp);
+
+		op->dev.archdata.iommu = bus_sd->iommu;
+		op->dev.archdata.stc = bus_sd->stc;
+		op->dev.archdata.host_controller = bus_sd->host_controller;
+		op->dev.archdata.numa_node = bus_sd->numa_node;
+
+		if (dp->child)
+			of_propagate_archdata(op);
+	}
+}
+
+struct bus_type of_platform_bus_type;
+EXPORT_SYMBOL(of_platform_bus_type);
+
+static void get_cells(struct device_node *dp, int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = of_n_addr_cells(dp);
+	if (sizec)
+		*sizec = of_n_size_cells(dp);
+}
+
+/*
+ * Default translator (generic bus)
+ */
+
+void of_bus_default_count_cells(struct device_node *dev, int *addrc, int *sizec)
+{
+	get_cells(dev, addrc, sizec);
+}
+
+/* Make sure the least significant 64-bits are in-range.  Even
+ * for 3 or 4 cell values it is a good enough approximation.
+ */
+int of_out_of_range(const u32 *addr, const u32 *base,
+		    const u32 *size, int na, int ns)
+{
+	u64 a = of_read_addr(addr, na);
+	u64 b = of_read_addr(base, na);
+
+	if (a < b)
+		return 1;
+
+	b += of_read_addr(size, ns);
+	if (a >= b)
+		return 1;
+
+	return 0;
+}
+
+int of_bus_default_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+	u32 result[OF_MAX_ADDR_CELLS];
+	int i;
+
+	if (ns > 2) {
+		printk("of_device: Cannot handle size cells (%d) > 2.", ns);
+		return -EINVAL;
+	}
+
+	if (of_out_of_range(addr, range, range + na + pna, na, ns))
+		return -EINVAL;
+
+	/* Start with the parent range base.  */
+	memcpy(result, range + na, pna * 4);
+
+	/* Add in the child address offset.  */
+	for (i = 0; i < na; i++)
+		result[pna - 1 - i] +=
+			(addr[na - 1 - i] -
+			 range[na - 1 - i]);
+
+	memcpy(addr, result, pna * 4);
+
+	return 0;
+}
+
+unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
+{
+	if (flags)
+		return flags;
+	return IORESOURCE_MEM;
+}
+
+/*
+ * SBUS bus specific translator
+ */
+
+int of_bus_sbus_match(struct device_node *np)
+{
+	struct device_node *dp = np;
+
+	while (dp) {
+		if (!strcmp(dp->name, "sbus") ||
+		    !strcmp(dp->name, "sbi"))
+			return 1;
+
+		/* Have a look at use_1to1_mapping().  We're trying
+		 * to match SBUS if that's the top-level bus and we
+		 * don't have some intervening real bus that provides
+		 * ranges based translations.
+		 */
+		if (of_find_property(dp, "ranges", NULL) != NULL)
+			break;
+
+		dp = dp->parent;
+	}
+
+	return 0;
+}
+
+void of_bus_sbus_count_cells(struct device_node *child, int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = 2;
+	if (sizec)
+		*sizec = 1;
+}
diff --git a/arch/sparc/kernel/of_device_common.h b/arch/sparc/kernel/of_device_common.h
new file mode 100644
index 00000000000..cdfd2399284
--- /dev/null
+++ b/arch/sparc/kernel/of_device_common.h
@@ -0,0 +1,36 @@
+#ifndef _OF_DEVICE_COMMON_H
+#define _OF_DEVICE_COMMON_H
+
+static inline u64 of_read_addr(const u32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | *(cell++);
+	return r;
+}
+
+void of_bus_default_count_cells(struct device_node *dev, int *addrc,
+				int *sizec);
+int of_out_of_range(const u32 *addr, const u32 *base,
+		    const u32 *size, int na, int ns);
+int of_bus_default_map(u32 *addr, const u32 *range, int na, int ns, int pna);
+unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags);
+
+int of_bus_sbus_match(struct device_node *np);
+void of_bus_sbus_count_cells(struct device_node *child, int *addrc, int *sizec);
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS	4
+
+struct of_bus {
+	const char	*name;
+	const char	*addr_prop_name;
+	int		(*match)(struct device_node *parent);
+	void		(*count_cells)(struct device_node *child,
+				       int *addrc, int *sizec);
+	int		(*map)(u32 *addr, const u32 *range,
+			       int na, int ns, int pna);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
+};
+
+#endif /* _OF_DEVICE_COMMON_H */
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 5db5ebed35d..2485eaa2310 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -230,8 +230,9 @@ static void dma_4v_free_coherent(struct device *dev, size_t size, void *cpu,
 		free_pages((unsigned long)cpu, order);
 }
 
-static dma_addr_t dma_4v_map_single(struct device *dev, void *ptr, size_t sz,
-				    enum dma_data_direction direction)
+static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page,
+				  unsigned long offset, size_t sz,
+				  enum dma_data_direction direction)
 {
 	struct iommu *iommu;
 	unsigned long flags, npages, oaddr;
@@ -245,7 +246,7 @@ static dma_addr_t dma_4v_map_single(struct device *dev, void *ptr, size_t sz,
 	if (unlikely(direction == DMA_NONE))
 		goto bad;
 
-	oaddr = (unsigned long)ptr;
+	oaddr = (unsigned long)(page_address(page) + offset);
 	npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK);
 	npages >>= IO_PAGE_SHIFT;
 
@@ -294,8 +295,8 @@ iommu_map_fail:
 	return DMA_ERROR_CODE;
 }
 
-static void dma_4v_unmap_single(struct device *dev, dma_addr_t bus_addr,
-				size_t sz, enum dma_data_direction direction)
+static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr,
+			      size_t sz, enum dma_data_direction direction)
 {
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
@@ -537,8 +538,8 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 static const struct dma_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
-	.map_single			= dma_4v_map_single,
-	.unmap_single			= dma_4v_unmap_single,
+	.map_page			= dma_4v_map_page,
+	.unmap_page			= dma_4v_unmap_page,
 	.map_sg				= dma_4v_map_sg,
 	.unmap_sg			= dma_4v_unmap_sg,
 	.sync_single_for_cpu		= dma_4v_sync_single_for_cpu,
diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h
index bb0f0fda6ca..453397fe5e1 100644
--- a/arch/sparc/kernel/prom.h
+++ b/arch/sparc/kernel/prom.h
@@ -22,7 +22,6 @@ static inline int is_root_node(const struct device_node *dp)
 
 extern char *build_path_component(struct device_node *dp);
 extern void of_console_init(void);
-extern void of_fill_in_cpu_data(void);
 
 extern unsigned int prom_early_allocated;
 
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index ca55c7012f7..fb06ac2bd38 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -374,75 +374,26 @@ static const char *get_mid_prop(void)
 	return (tlb_type == spitfire ? "upa-portid" : "portid");
 }
 
-struct device_node *of_find_node_by_cpuid(int cpuid)
-{
-	struct device_node *dp;
-	const char *mid_prop = get_mid_prop();
-
-	for_each_node_by_type(dp, "cpu") {
-		int id = of_getintprop_default(dp, mid_prop, -1);
-		const char *this_mid_prop = mid_prop;
-
-		if (id < 0) {
-			this_mid_prop = "cpuid";
-			id = of_getintprop_default(dp, this_mid_prop, -1);
-		}
-
-		if (id < 0) {
-			prom_printf("OF: Serious problem, cpu lacks "
-				    "%s property", this_mid_prop);
-			prom_halt();
-		}
-		if (cpuid == id)
-			return dp;
-	}
-	return NULL;
-}
-
-void __init of_fill_in_cpu_data(void)
+static void *of_iterate_over_cpus(void *(*func)(struct device_node *, int, int), int arg)
 {
 	struct device_node *dp;
 	const char *mid_prop;
 
-	if (tlb_type == hypervisor)
-		return;
-
 	mid_prop = get_mid_prop();
-	ncpus_probed = 0;
 	for_each_node_by_type(dp, "cpu") {
 		int cpuid = of_getintprop_default(dp, mid_prop, -1);
 		const char *this_mid_prop = mid_prop;
-		struct device_node *portid_parent;
-		int portid = -1;
+		void *ret;
 
-		portid_parent = NULL;
 		if (cpuid < 0) {
 			this_mid_prop = "cpuid";
 			cpuid = of_getintprop_default(dp, this_mid_prop, -1);
-			if (cpuid >= 0) {
-				int limit = 2;
-
-				portid_parent = dp;
-				while (limit--) {
-					portid_parent = portid_parent->parent;
-					if (!portid_parent)
-						break;
-					portid = of_getintprop_default(portid_parent,
-								       "portid", -1);
-					if (portid >= 0)
-						break;
-				}
-			}
 		}
-
 		if (cpuid < 0) {
 			prom_printf("OF: Serious problem, cpu lacks "
 				    "%s property", this_mid_prop);
 			prom_halt();
 		}
-
-		ncpus_probed++;
-
 #ifdef CONFIG_SMP
 		if (cpuid >= NR_CPUS) {
 			printk(KERN_WARNING "Ignoring CPU %d which is "
@@ -450,79 +401,142 @@ void __init of_fill_in_cpu_data(void)
 			       cpuid, NR_CPUS);
 			continue;
 		}
-#else
-		/* On uniprocessor we only want the values for the
-		 * real physical cpu the kernel booted onto, however
-		 * cpu_data() only has one entry at index 0.
-		 */
-		if (cpuid != real_hard_smp_processor_id())
-			continue;
-		cpuid = 0;
 #endif
+		ret = func(dp, cpuid, arg);
+		if (ret)
+			return ret;
+	}
+	return NULL;
+}
 
-		cpu_data(cpuid).clock_tick =
-			of_getintprop_default(dp, "clock-frequency", 0);
-
-		if (portid_parent) {
-			cpu_data(cpuid).dcache_size =
-				of_getintprop_default(dp, "l1-dcache-size",
-						      16 * 1024);
-			cpu_data(cpuid).dcache_line_size =
-				of_getintprop_default(dp, "l1-dcache-line-size",
-						      32);
-			cpu_data(cpuid).icache_size =
-				of_getintprop_default(dp, "l1-icache-size",
-						      8 * 1024);
-			cpu_data(cpuid).icache_line_size =
-				of_getintprop_default(dp, "l1-icache-line-size",
-						      32);
-			cpu_data(cpuid).ecache_size =
-				of_getintprop_default(dp, "l2-cache-size", 0);
-			cpu_data(cpuid).ecache_line_size =
-				of_getintprop_default(dp, "l2-cache-line-size", 0);
-			if (!cpu_data(cpuid).ecache_size ||
-			    !cpu_data(cpuid).ecache_line_size) {
-				cpu_data(cpuid).ecache_size =
-					of_getintprop_default(portid_parent,
-							      "l2-cache-size",
-							      (4 * 1024 * 1024));
-				cpu_data(cpuid).ecache_line_size =
-					of_getintprop_default(portid_parent,
-							      "l2-cache-line-size", 64);
-			}
-
-			cpu_data(cpuid).core_id = portid + 1;
-			cpu_data(cpuid).proc_id = portid;
+static void *check_cpu_node(struct device_node *dp, int cpuid, int id)
+{
+	if (id == cpuid)
+		return dp;
+	return NULL;
+}
+
+struct device_node *of_find_node_by_cpuid(int cpuid)
+{
+	return of_iterate_over_cpus(check_cpu_node, cpuid);
+}
+
+static void *record_one_cpu(struct device_node *dp, int cpuid, int arg)
+{
+	ncpus_probed++;
 #ifdef CONFIG_SMP
-			sparc64_multi_core = 1;
+	set_cpu_present(cpuid, true);
+	set_cpu_possible(cpuid, true);
 #endif
-		} else {
-			cpu_data(cpuid).dcache_size =
-				of_getintprop_default(dp, "dcache-size", 16 * 1024);
-			cpu_data(cpuid).dcache_line_size =
-				of_getintprop_default(dp, "dcache-line-size", 32);
+	return NULL;
+}
 
-			cpu_data(cpuid).icache_size =
-				of_getintprop_default(dp, "icache-size", 16 * 1024);
-			cpu_data(cpuid).icache_line_size =
-				of_getintprop_default(dp, "icache-line-size", 32);
+void __init of_populate_present_mask(void)
+{
+	if (tlb_type == hypervisor)
+		return;
+
+	ncpus_probed = 0;
+	of_iterate_over_cpus(record_one_cpu, 0);
+}
 
+static void *fill_in_one_cpu(struct device_node *dp, int cpuid, int arg)
+{
+	struct device_node *portid_parent = NULL;
+	int portid = -1;
+
+	if (of_find_property(dp, "cpuid", NULL)) {
+		int limit = 2;
+
+		portid_parent = dp;
+		while (limit--) {
+			portid_parent = portid_parent->parent;
+			if (!portid_parent)
+				break;
+			portid = of_getintprop_default(portid_parent,
+						       "portid", -1);
+			if (portid >= 0)
+				break;
+		}
+	}
+
+#ifndef CONFIG_SMP
+	/* On uniprocessor we only want the values for the
+	 * real physical cpu the kernel booted onto, however
+	 * cpu_data() only has one entry at index 0.
+	 */
+	if (cpuid != real_hard_smp_processor_id())
+		return NULL;
+	cpuid = 0;
+#endif
+
+	cpu_data(cpuid).clock_tick =
+		of_getintprop_default(dp, "clock-frequency", 0);
+
+	if (portid_parent) {
+		cpu_data(cpuid).dcache_size =
+			of_getintprop_default(dp, "l1-dcache-size",
+					      16 * 1024);
+		cpu_data(cpuid).dcache_line_size =
+			of_getintprop_default(dp, "l1-dcache-line-size",
+					      32);
+		cpu_data(cpuid).icache_size =
+			of_getintprop_default(dp, "l1-icache-size",
+					      8 * 1024);
+		cpu_data(cpuid).icache_line_size =
+			of_getintprop_default(dp, "l1-icache-line-size",
+					      32);
+		cpu_data(cpuid).ecache_size =
+			of_getintprop_default(dp, "l2-cache-size", 0);
+		cpu_data(cpuid).ecache_line_size =
+			of_getintprop_default(dp, "l2-cache-line-size", 0);
+		if (!cpu_data(cpuid).ecache_size ||
+		    !cpu_data(cpuid).ecache_line_size) {
 			cpu_data(cpuid).ecache_size =
-				of_getintprop_default(dp, "ecache-size",
+				of_getintprop_default(portid_parent,
+						      "l2-cache-size",
 						      (4 * 1024 * 1024));
 			cpu_data(cpuid).ecache_line_size =
-				of_getintprop_default(dp, "ecache-line-size", 64);
-
-			cpu_data(cpuid).core_id = 0;
-			cpu_data(cpuid).proc_id = -1;
+				of_getintprop_default(portid_parent,
+						      "l2-cache-line-size", 64);
 		}
 
+		cpu_data(cpuid).core_id = portid + 1;
+		cpu_data(cpuid).proc_id = portid;
 #ifdef CONFIG_SMP
-		set_cpu_present(cpuid, true);
-		set_cpu_possible(cpuid, true);
+		sparc64_multi_core = 1;
 #endif
+	} else {
+		cpu_data(cpuid).dcache_size =
+			of_getintprop_default(dp, "dcache-size", 16 * 1024);
+		cpu_data(cpuid).dcache_line_size =
+			of_getintprop_default(dp, "dcache-line-size", 32);
+
+		cpu_data(cpuid).icache_size =
+			of_getintprop_default(dp, "icache-size", 16 * 1024);
+		cpu_data(cpuid).icache_line_size =
+			of_getintprop_default(dp, "icache-line-size", 32);
+
+		cpu_data(cpuid).ecache_size =
+			of_getintprop_default(dp, "ecache-size",
+					      (4 * 1024 * 1024));
+		cpu_data(cpuid).ecache_line_size =
+			of_getintprop_default(dp, "ecache-line-size", 64);
+
+		cpu_data(cpuid).core_id = 0;
+		cpu_data(cpuid).proc_id = -1;
 	}
 
+	return NULL;
+}
+
+void __init of_fill_in_cpu_data(void)
+{
+	if (tlb_type == hypervisor)
+		return;
+
+	of_iterate_over_cpus(fill_in_one_cpu, 0);
+
 	smp_fill_in_sib_core_maps();
 }
 
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index ff7b591c894..0fb5789d43c 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -313,6 +313,4 @@ void __init prom_build_devicetree(void)
 
 	printk("PROM: Built device tree with %u bytes of memory.\n",
 	       prom_early_allocated);
-
-	of_fill_in_cpu_data();
 }
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index f7642e5a94d..fa44eaf8d89 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -20,7 +20,8 @@
 #include <linux/cache.h>
 #include <linux/jiffies.h>
 #include <linux/profile.h>
-#include <linux/lmb.h>
+#include <linux/bootmem.h>
+#include <linux/vmalloc.h>
 #include <linux/cpu.h>
 
 #include <asm/head.h>
@@ -47,6 +48,8 @@
 #include <asm/ldc.h>
 #include <asm/hypervisor.h>
 
+#include "cpumap.h"
+
 int sparc64_multi_core __read_mostly;
 
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
@@ -278,7 +281,7 @@ static unsigned long kimage_addr_to_ra(void *p)
 	return kern_base + (val - KERNBASE);
 }
 
-static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg, void **descrp)
 {
 	extern unsigned long sparc64_ttable_tl0;
 	extern unsigned long kern_locked_tte_data;
@@ -298,12 +301,12 @@ static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread
 		       "hvtramp_descr.\n");
 		return;
 	}
+	*descrp = hdesc;
 
 	hdesc->cpu = cpu;
 	hdesc->num_mappings = num_kernel_image_mappings;
 
 	tb = &trap_block[cpu];
-	tb->hdesc = hdesc;
 
 	hdesc->fault_info_va = (unsigned long) &tb->fault_info;
 	hdesc->fault_info_pa = kimage_addr_to_ra(&tb->fault_info);
@@ -341,12 +344,12 @@ static struct thread_info *cpu_new_thread = NULL;
 
 static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
 {
-	struct trap_per_cpu *tb = &trap_block[cpu];
 	unsigned long entry =
 		(unsigned long)(&sparc64_cpu_startup);
 	unsigned long cookie =
 		(unsigned long)(&cpu_new_thread);
 	struct task_struct *p;
+	void *descr = NULL;
 	int timeout, ret;
 
 	p = fork_idle(cpu);
@@ -359,7 +362,8 @@ static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
 #if defined(CONFIG_SUN_LDOMS) && defined(CONFIG_HOTPLUG_CPU)
 		if (ldom_domaining_enabled)
 			ldom_startcpu_cpuid(cpu,
-					    (unsigned long) cpu_new_thread);
+					    (unsigned long) cpu_new_thread,
+					    &descr);
 		else
 #endif
 			prom_startcpu_cpuid(cpu, entry, cookie);
@@ -383,10 +387,7 @@ static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
 	}
 	cpu_new_thread = NULL;
 
-	if (tb->hdesc) {
-		kfree(tb->hdesc);
-		tb->hdesc = NULL;
-	}
+	kfree(descr);
 
 	return ret;
 }
@@ -1315,6 +1316,8 @@ int __cpu_disable(void)
 	cpu_clear(cpu, cpu_online_map);
 	ipi_call_unlock();
 
+	cpu_map_rebuild();
+
 	return 0;
 }
 
@@ -1373,36 +1376,171 @@ void smp_send_stop(void)
 {
 }
 
-unsigned long __per_cpu_base __read_mostly;
-unsigned long __per_cpu_shift __read_mostly;
+/**
+ * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
+ * @cpu: cpu to allocate for
+ * @size: size allocation in bytes
+ * @align: alignment
+ *
+ * Allocate @size bytes aligned at @align for cpu @cpu.  This wrapper
+ * does the right thing for NUMA regardless of the current
+ * configuration.
+ *
+ * RETURNS:
+ * Pointer to the allocated area on success, NULL on failure.
+ */
+static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
+					unsigned long align)
+{
+	const unsigned long goal = __pa(MAX_DMA_ADDRESS);
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	int node = cpu_to_node(cpu);
+	void *ptr;
+
+	if (!node_online(node) || !NODE_DATA(node)) {
+		ptr = __alloc_bootmem(size, align, goal);
+		pr_info("cpu %d has no node %d or node-local memory\n",
+			cpu, node);
+		pr_debug("per cpu data for cpu%d %lu bytes at %016lx\n",
+			 cpu, size, __pa(ptr));
+	} else {
+		ptr = __alloc_bootmem_node(NODE_DATA(node),
+					   size, align, goal);
+		pr_debug("per cpu data for cpu%d %lu bytes on node%d at "
+			 "%016lx\n", cpu, size, node, __pa(ptr));
+	}
+	return ptr;
+#else
+	return __alloc_bootmem(size, align, goal);
+#endif
+}
 
-EXPORT_SYMBOL(__per_cpu_base);
-EXPORT_SYMBOL(__per_cpu_shift);
+static size_t pcpur_size __initdata;
+static void **pcpur_ptrs __initdata;
 
-void __init real_setup_per_cpu_areas(void)
+static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
 {
-	unsigned long paddr, goal, size, i;
-	char *ptr;
+	size_t off = (size_t)pageno << PAGE_SHIFT;
 
-	/* Copy section for each CPU (we discard the original) */
-	goal = PERCPU_ENOUGH_ROOM;
+	if (off >= pcpur_size)
+		return NULL;
 
-	__per_cpu_shift = PAGE_SHIFT;
-	for (size = PAGE_SIZE; size < goal; size <<= 1UL)
-		__per_cpu_shift++;
+	return virt_to_page(pcpur_ptrs[cpu] + off);
+}
+
+#define PCPU_CHUNK_SIZE (4UL * 1024UL * 1024UL)
+
+static void __init pcpu_map_range(unsigned long start, unsigned long end,
+				  struct page *page)
+{
+	unsigned long pfn = page_to_pfn(page);
+	unsigned long pte_base;
+
+	BUG_ON((pfn<<PAGE_SHIFT)&(PCPU_CHUNK_SIZE - 1UL));
+
+	pte_base = (_PAGE_VALID | _PAGE_SZ4MB_4U |
+		    _PAGE_CP_4U | _PAGE_CV_4U |
+		    _PAGE_P_4U | _PAGE_W_4U);
+	if (tlb_type == hypervisor)
+		pte_base = (_PAGE_VALID | _PAGE_SZ4MB_4V |
+			    _PAGE_CP_4V | _PAGE_CV_4V |
+			    _PAGE_P_4V | _PAGE_W_4V);
+
+	while (start < end) {
+		pgd_t *pgd = pgd_offset_k(start);
+		unsigned long this_end;
+		pud_t *pud;
+		pmd_t *pmd;
+		pte_t *pte;
+
+		pud = pud_offset(pgd, start);
+		if (pud_none(*pud)) {
+			pmd_t *new;
+
+			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+			pud_populate(&init_mm, pud, new);
+		}
+
+		pmd = pmd_offset(pud, start);
+		if (!pmd_present(*pmd)) {
+			pte_t *new;
+
+			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+			pmd_populate_kernel(&init_mm, pmd, new);
+		}
 
-	paddr = lmb_alloc(size * NR_CPUS, PAGE_SIZE);
-	if (!paddr) {
-		prom_printf("Cannot allocate per-cpu memory.\n");
-		prom_halt();
+		pte = pte_offset_kernel(pmd, start);
+		this_end = (start + PMD_SIZE) & PMD_MASK;
+		if (this_end > end)
+			this_end = end;
+
+		while (start < this_end) {
+			unsigned long paddr = pfn << PAGE_SHIFT;
+
+			pte_val(*pte) = (paddr | pte_base);
+
+			start += PAGE_SIZE;
+			pte++;
+			pfn++;
+		}
+	}
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	size_t dyn_size, static_size = __per_cpu_end - __per_cpu_start;
+	static struct vm_struct vm;
+	unsigned long delta, cpu;
+	size_t pcpu_unit_size;
+	size_t ptrs_size;
+
+	pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+			       PERCPU_DYNAMIC_RESERVE);
+	dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE;
+
+
+	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
+	pcpur_ptrs = alloc_bootmem(ptrs_size);
+
+	for_each_possible_cpu(cpu) {
+		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE,
+						     PCPU_CHUNK_SIZE);
+
+		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
+			     PCPU_CHUNK_SIZE - pcpur_size);
+
+		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
 	}
 
-	ptr = __va(paddr);
-	__per_cpu_base = ptr - __per_cpu_start;
+	/* allocate address and map */
+	vm.flags = VM_ALLOC;
+	vm.size = num_possible_cpus() * PCPU_CHUNK_SIZE;
+	vm_area_register_early(&vm, PCPU_CHUNK_SIZE);
+
+	for_each_possible_cpu(cpu) {
+		unsigned long start = (unsigned long) vm.addr;
+		unsigned long end;
+
+		start += cpu * PCPU_CHUNK_SIZE;
+		end = start + PCPU_CHUNK_SIZE;
+		pcpu_map_range(start, end, virt_to_page(pcpur_ptrs[cpu]));
+	}
 
-	for (i = 0; i < NR_CPUS; i++, ptr += size)
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+	pcpu_unit_size = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+						PERCPU_MODULE_RESERVE, dyn_size,
+						PCPU_CHUNK_SIZE, vm.addr, NULL);
+
+	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu) {
+		__per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
+	}
 
 	/* Setup %g5 for the boot cpu.  */
 	__local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
+
+	of_fill_in_cpu_data();
+	if (tlb_type == hypervisor)
+		mdesc_fill_in_cpu_data(cpu_all_mask);
 }
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 00ec3b15f38..69090165729 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -81,4 +81,6 @@ sys_call_table:
 /*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev
+/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
+/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo
+
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 82b5bf85b9d..6b3ee88e253 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -82,7 +82,8 @@ sys_call_table32:
 	.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
 	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv, compat_sys_pwritev
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
+	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo
 
 #endif /* CONFIG_COMPAT */
 
@@ -156,4 +157,5 @@ sys_call_table:
 	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
+	.word sys_pwritev, sys_rt_tgsigqueueinfo
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index d809c4ebb48..10f7bb9fc14 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -2509,6 +2509,7 @@ void do_getpsr(struct pt_regs *regs)
 }
 
 struct trap_per_cpu trap_block[NR_CPUS];
+EXPORT_SYMBOL(trap_block);
 
 /* This can get invoked before sched_init() so play it super safe
  * and use hard_smp_processor_id().
@@ -2530,84 +2531,97 @@ extern void tsb_config_offsets_are_bolixed_dave(void);
 void __init trap_init(void)
 {
 	/* Compile time sanity check. */
-	if (TI_TASK != offsetof(struct thread_info, task) ||
-	    TI_FLAGS != offsetof(struct thread_info, flags) ||
-	    TI_CPU != offsetof(struct thread_info, cpu) ||
-	    TI_FPSAVED != offsetof(struct thread_info, fpsaved) ||
-	    TI_KSP != offsetof(struct thread_info, ksp) ||
-	    TI_FAULT_ADDR != offsetof(struct thread_info, fault_address) ||
-	    TI_KREGS != offsetof(struct thread_info, kregs) ||
-	    TI_UTRAPS != offsetof(struct thread_info, utraps) ||
-	    TI_EXEC_DOMAIN != offsetof(struct thread_info, exec_domain) ||
-	    TI_REG_WINDOW != offsetof(struct thread_info, reg_window) ||
-	    TI_RWIN_SPTRS != offsetof(struct thread_info, rwbuf_stkptrs) ||
-	    TI_GSR != offsetof(struct thread_info, gsr) ||
-	    TI_XFSR != offsetof(struct thread_info, xfsr) ||
-	    TI_USER_CNTD0 != offsetof(struct thread_info, user_cntd0) ||
-	    TI_USER_CNTD1 != offsetof(struct thread_info, user_cntd1) ||
-	    TI_KERN_CNTD0 != offsetof(struct thread_info, kernel_cntd0) ||
-	    TI_KERN_CNTD1 != offsetof(struct thread_info, kernel_cntd1) ||
-	    TI_PCR != offsetof(struct thread_info, pcr_reg) ||
-	    TI_PRE_COUNT != offsetof(struct thread_info, preempt_count) ||
-	    TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
-	    TI_SYS_NOERROR != offsetof(struct thread_info, syscall_noerror) ||
-	    TI_RESTART_BLOCK != offsetof(struct thread_info, restart_block) ||
-	    TI_KUNA_REGS != offsetof(struct thread_info, kern_una_regs) ||
-	    TI_KUNA_INSN != offsetof(struct thread_info, kern_una_insn) ||
-	    TI_FPREGS != offsetof(struct thread_info, fpregs) ||
-	    (TI_FPREGS & (64 - 1)))
-		thread_info_offsets_are_bolixed_dave();
-
-	if (TRAP_PER_CPU_THREAD != offsetof(struct trap_per_cpu, thread) ||
-	    (TRAP_PER_CPU_PGD_PADDR !=
-	     offsetof(struct trap_per_cpu, pgd_paddr)) ||
-	    (TRAP_PER_CPU_CPU_MONDO_PA !=
-	     offsetof(struct trap_per_cpu, cpu_mondo_pa)) ||
-	    (TRAP_PER_CPU_DEV_MONDO_PA !=
-	     offsetof(struct trap_per_cpu, dev_mondo_pa)) ||
-	    (TRAP_PER_CPU_RESUM_MONDO_PA !=
-	     offsetof(struct trap_per_cpu, resum_mondo_pa)) ||
-	    (TRAP_PER_CPU_RESUM_KBUF_PA !=
-	     offsetof(struct trap_per_cpu, resum_kernel_buf_pa)) ||
-	    (TRAP_PER_CPU_NONRESUM_MONDO_PA !=
-	     offsetof(struct trap_per_cpu, nonresum_mondo_pa)) ||
-	    (TRAP_PER_CPU_NONRESUM_KBUF_PA !=
-	     offsetof(struct trap_per_cpu, nonresum_kernel_buf_pa)) ||
-	    (TRAP_PER_CPU_FAULT_INFO !=
-	     offsetof(struct trap_per_cpu, fault_info)) ||
-	    (TRAP_PER_CPU_CPU_MONDO_BLOCK_PA !=
-	     offsetof(struct trap_per_cpu, cpu_mondo_block_pa)) ||
-	    (TRAP_PER_CPU_CPU_LIST_PA !=
-	     offsetof(struct trap_per_cpu, cpu_list_pa)) ||
-	    (TRAP_PER_CPU_TSB_HUGE !=
-	     offsetof(struct trap_per_cpu, tsb_huge)) ||
-	    (TRAP_PER_CPU_TSB_HUGE_TEMP !=
-	     offsetof(struct trap_per_cpu, tsb_huge_temp)) ||
-	    (TRAP_PER_CPU_IRQ_WORKLIST_PA !=
-	     offsetof(struct trap_per_cpu, irq_worklist_pa)) ||
-	    (TRAP_PER_CPU_CPU_MONDO_QMASK !=
-	     offsetof(struct trap_per_cpu, cpu_mondo_qmask)) ||
-	    (TRAP_PER_CPU_DEV_MONDO_QMASK !=
-	     offsetof(struct trap_per_cpu, dev_mondo_qmask)) ||
-	    (TRAP_PER_CPU_RESUM_QMASK !=
-	     offsetof(struct trap_per_cpu, resum_qmask)) ||
-	    (TRAP_PER_CPU_NONRESUM_QMASK !=
-	     offsetof(struct trap_per_cpu, nonresum_qmask)))
-		trap_per_cpu_offsets_are_bolixed_dave();
-
-	if ((TSB_CONFIG_TSB !=
-	     offsetof(struct tsb_config, tsb)) ||
-	    (TSB_CONFIG_RSS_LIMIT !=
-	     offsetof(struct tsb_config, tsb_rss_limit)) ||
-	    (TSB_CONFIG_NENTRIES !=
-	     offsetof(struct tsb_config, tsb_nentries)) ||
-	    (TSB_CONFIG_REG_VAL !=
-	     offsetof(struct tsb_config, tsb_reg_val)) ||
-	    (TSB_CONFIG_MAP_VADDR !=
-	     offsetof(struct tsb_config, tsb_map_vaddr)) ||
-	    (TSB_CONFIG_MAP_PTE !=
-	     offsetof(struct tsb_config, tsb_map_pte)))
-		tsb_config_offsets_are_bolixed_dave();
+	BUILD_BUG_ON(TI_TASK != offsetof(struct thread_info, task) ||
+		     TI_FLAGS != offsetof(struct thread_info, flags) ||
+		     TI_CPU != offsetof(struct thread_info, cpu) ||
+		     TI_FPSAVED != offsetof(struct thread_info, fpsaved) ||
+		     TI_KSP != offsetof(struct thread_info, ksp) ||
+		     TI_FAULT_ADDR != offsetof(struct thread_info,
+					       fault_address) ||
+		     TI_KREGS != offsetof(struct thread_info, kregs) ||
+		     TI_UTRAPS != offsetof(struct thread_info, utraps) ||
+		     TI_EXEC_DOMAIN != offsetof(struct thread_info,
+						exec_domain) ||
+		     TI_REG_WINDOW != offsetof(struct thread_info,
+					       reg_window) ||
+		     TI_RWIN_SPTRS != offsetof(struct thread_info,
+					       rwbuf_stkptrs) ||
+		     TI_GSR != offsetof(struct thread_info, gsr) ||
+		     TI_XFSR != offsetof(struct thread_info, xfsr) ||
+		     TI_USER_CNTD0 != offsetof(struct thread_info,
+					       user_cntd0) ||
+		     TI_USER_CNTD1 != offsetof(struct thread_info,
+					       user_cntd1) ||
+		     TI_KERN_CNTD0 != offsetof(struct thread_info,
+					       kernel_cntd0) ||
+		     TI_KERN_CNTD1 != offsetof(struct thread_info,
+					       kernel_cntd1) ||
+		     TI_PCR != offsetof(struct thread_info, pcr_reg) ||
+		     TI_PRE_COUNT != offsetof(struct thread_info,
+					      preempt_count) ||
+		     TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
+		     TI_SYS_NOERROR != offsetof(struct thread_info,
+						syscall_noerror) ||
+		     TI_RESTART_BLOCK != offsetof(struct thread_info,
+						  restart_block) ||
+		     TI_KUNA_REGS != offsetof(struct thread_info,
+					      kern_una_regs) ||
+		     TI_KUNA_INSN != offsetof(struct thread_info,
+					      kern_una_insn) ||
+		     TI_FPREGS != offsetof(struct thread_info, fpregs) ||
+		     (TI_FPREGS & (64 - 1)));
+
+	BUILD_BUG_ON(TRAP_PER_CPU_THREAD != offsetof(struct trap_per_cpu,
+						     thread) ||
+		     (TRAP_PER_CPU_PGD_PADDR !=
+		      offsetof(struct trap_per_cpu, pgd_paddr)) ||
+		     (TRAP_PER_CPU_CPU_MONDO_PA !=
+		      offsetof(struct trap_per_cpu, cpu_mondo_pa)) ||
+		     (TRAP_PER_CPU_DEV_MONDO_PA !=
+		      offsetof(struct trap_per_cpu, dev_mondo_pa)) ||
+		     (TRAP_PER_CPU_RESUM_MONDO_PA !=
+		      offsetof(struct trap_per_cpu, resum_mondo_pa)) ||
+		     (TRAP_PER_CPU_RESUM_KBUF_PA !=
+		      offsetof(struct trap_per_cpu, resum_kernel_buf_pa)) ||
+		     (TRAP_PER_CPU_NONRESUM_MONDO_PA !=
+		      offsetof(struct trap_per_cpu, nonresum_mondo_pa)) ||
+		     (TRAP_PER_CPU_NONRESUM_KBUF_PA !=
+		      offsetof(struct trap_per_cpu, nonresum_kernel_buf_pa)) ||
+		     (TRAP_PER_CPU_FAULT_INFO !=
+		      offsetof(struct trap_per_cpu, fault_info)) ||
+		     (TRAP_PER_CPU_CPU_MONDO_BLOCK_PA !=
+		      offsetof(struct trap_per_cpu, cpu_mondo_block_pa)) ||
+		     (TRAP_PER_CPU_CPU_LIST_PA !=
+		      offsetof(struct trap_per_cpu, cpu_list_pa)) ||
+		     (TRAP_PER_CPU_TSB_HUGE !=
+		      offsetof(struct trap_per_cpu, tsb_huge)) ||
+		     (TRAP_PER_CPU_TSB_HUGE_TEMP !=
+		      offsetof(struct trap_per_cpu, tsb_huge_temp)) ||
+		     (TRAP_PER_CPU_IRQ_WORKLIST_PA !=
+		      offsetof(struct trap_per_cpu, irq_worklist_pa)) ||
+		     (TRAP_PER_CPU_CPU_MONDO_QMASK !=
+		      offsetof(struct trap_per_cpu, cpu_mondo_qmask)) ||
+		     (TRAP_PER_CPU_DEV_MONDO_QMASK !=
+		      offsetof(struct trap_per_cpu, dev_mondo_qmask)) ||
+		     (TRAP_PER_CPU_RESUM_QMASK !=
+		      offsetof(struct trap_per_cpu, resum_qmask)) ||
+		     (TRAP_PER_CPU_NONRESUM_QMASK !=
+		      offsetof(struct trap_per_cpu, nonresum_qmask)) ||
+		     (TRAP_PER_CPU_PER_CPU_BASE !=
+		      offsetof(struct trap_per_cpu, __per_cpu_base)));
+
+	BUILD_BUG_ON((TSB_CONFIG_TSB !=
+		      offsetof(struct tsb_config, tsb)) ||
+		     (TSB_CONFIG_RSS_LIMIT !=
+		      offsetof(struct tsb_config, tsb_rss_limit)) ||
+		     (TSB_CONFIG_NENTRIES !=
+		      offsetof(struct tsb_config, tsb_nentries)) ||
+		     (TSB_CONFIG_REG_VAL !=
+		      offsetof(struct tsb_config, tsb_reg_val)) ||
+		     (TSB_CONFIG_MAP_VADDR !=
+		      offsetof(struct tsb_config, tsb_map_vaddr)) ||
+		     (TSB_CONFIG_MAP_PTE !=
+		      offsetof(struct tsb_config, tsb_map_pte)));
 
 	/* Attach to the address space of init_task.  On SMP we
 	 * do this in smp.c:smp_callin for other cpus.
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index cbb282dab5a..26bb3919ff1 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -358,6 +358,7 @@ void __init paging_init(void)
 	protection_map[15] = PAGE_SHARED;
 	btfixup();
 	prom_build_devicetree();
+	of_fill_in_cpu_data();
 	device_scan();
 }
 
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index f26a352c08a..ca92e2f54e4 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1679,11 +1679,6 @@ pgd_t swapper_pg_dir[2048];
 static void sun4u_pgprot_init(void);
 static void sun4v_pgprot_init(void);
 
-/* Dummy function */
-void __init setup_per_cpu_areas(void)
-{
-}
-
 void __init paging_init(void)
 {
 	unsigned long end_pfn, shift, phys_base;
@@ -1799,16 +1794,13 @@ void __init paging_init(void)
 	if (tlb_type == hypervisor)
 		sun4v_ktsb_register();
 
-	/* We must setup the per-cpu areas before we pull in the
-	 * PROM and the MDESC.  The code there fills in cpu and
-	 * other information into per-cpu data structures.
-	 */
-	real_setup_per_cpu_areas();
-
 	prom_build_devicetree();
+	of_populate_present_mask();
 
-	if (tlb_type == hypervisor)
+	if (tlb_type == hypervisor) {
 		sun4v_mdesc_init();
+		mdesc_populate_present_mask(cpu_all_mask);
+	}
 
 	/* Once the OF device tree and MDESC have been setup, we know
 	 * the list of possible cpus.  Therefore we can allocate the
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 06c9a7d9820..ade4eb373bd 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -19,6 +19,7 @@
 #include <linux/fs.h>
 #include <linux/seq_file.h>
 #include <linux/kdebug.h>
+#include <linux/log2.h>
 
 #include <asm/bitext.h>
 #include <asm/page.h>
@@ -349,7 +350,7 @@ static void srmmu_free_nocache(unsigned long vaddr, int size)
 		    vaddr, srmmu_nocache_end);
 		BUG();
 	}
-	if (size & (size-1)) {
+	if (!is_power_of_2(size)) {
 		printk("Size 0x%x is not a power of 2\n", size);
 		BUG();
 	}
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 434ba121e3c..3b44b47c7e1 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -360,7 +360,7 @@ static struct platform_driver uml_net_driver = {
 
 static void net_device_release(struct device *dev)
 {
-	struct uml_net *device = dev->driver_data;
+	struct uml_net *device = dev_get_drvdata(dev);
 	struct net_device *netdev = device->dev;
 	struct uml_net_private *lp = netdev_priv(netdev);
 
@@ -440,7 +440,7 @@ static void eth_configure(int n, void *init, char *mac,
 	device->pdev.id = n;
 	device->pdev.name = DRIVER_NAME;
 	device->pdev.dev.release = net_device_release;
-	device->pdev.dev.driver_data = device;
+	dev_set_drvdata(&device->pdev.dev, device);
 	if (platform_device_register(&device->pdev))
 		goto out_free_netdev;
 	SET_NETDEV_DEV(dev,&device->pdev.dev);
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index aa9e926e13d..8f05d4d9da1 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -778,7 +778,7 @@ static int ubd_open_dev(struct ubd *ubd_dev)
 
 static void ubd_device_release(struct device *dev)
 {
-	struct ubd *ubd_dev = dev->driver_data;
+	struct ubd *ubd_dev = dev_get_drvdata(dev);
 
 	blk_cleanup_queue(ubd_dev->queue);
 	*ubd_dev = ((struct ubd) DEFAULT_UBD);
@@ -807,7 +807,7 @@ static int ubd_disk_register(int major, u64 size, int unit,
 		ubd_devs[unit].pdev.id   = unit;
 		ubd_devs[unit].pdev.name = DRIVER_NAME;
 		ubd_devs[unit].pdev.dev.release = ubd_device_release;
-		ubd_devs[unit].pdev.dev.driver_data = &ubd_devs[unit];
+		dev_set_drvdata(&ubd_devs[unit].pdev.dev, &ubd_devs[unit]);
 		platform_device_register(&ubd_devs[unit].pdev);
 		disk->driverfs_dev = &ubd_devs[unit].pdev.dev;
 	}
diff --git a/arch/um/include/shared/init.h b/arch/um/include/shared/init.h
index 37dd097c16c..b3906f860a8 100644
--- a/arch/um/include/shared/init.h
+++ b/arch/um/include/shared/init.h
@@ -27,7 +27,7 @@
  * sign followed by value, e.g.:
  *
  * static int init_variable __initdata = 0;
- * static char linux_logo[] __initdata = { 0x32, 0x36, ... };
+ * static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
  *
  * Don't forget to initialize data not at file scope, i.e. within a function,
  * as gcc otherwise puts the data into the bss section and not into the init
diff --git a/arch/um/include/shared/net_user.h b/arch/um/include/shared/net_user.h
index 63bee158cd8..3dabbe128e4 100644
--- a/arch/um/include/shared/net_user.h
+++ b/arch/um/include/shared/net_user.h
@@ -8,7 +8,7 @@
 
 #define ETH_ADDR_LEN (6)
 #define ETH_HEADER_ETHERTAP (16)
-#define ETH_HEADER_OTHER (14)
+#define ETH_HEADER_OTHER (26) /* 14 for ethernet + VLAN + MPLS for crazy people */
 #define ETH_MAX_PACKET (1500)
 
 #define UML_NET_VERSION (4)
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index 806d381947b..b25121b537d 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -10,11 +10,8 @@
 #include "linux/mqueue.h"
 #include "asm/uaccess.h"
 
-struct mm_struct init_mm = INIT_MM(init_mm);
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-EXPORT_SYMBOL(init_mm);
-
 /*
  * Initial task structure.
  *
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 336b6156907..454cdb43e35 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -358,7 +358,7 @@ EXPORT_SYMBOL(um_request_irq);
 EXPORT_SYMBOL(reactivate_fd);
 
 /*
- * hw_interrupt_type must define (startup || enable) &&
+ * irq_chip must define (startup || enable) &&
  * (shutdown || disable) && end
  */
 static void dummy(unsigned int irq)
@@ -366,7 +366,7 @@ static void dummy(unsigned int irq)
 }
 
 /* This is used for everything else than the timer. */
-static struct hw_interrupt_type normal_irq_type = {
+static struct irq_chip normal_irq_type = {
 	.typename = "SIGIO",
 	.release = free_irq_by_irq_and_dev,
 	.disable = dummy,
@@ -375,7 +375,7 @@ static struct hw_interrupt_type normal_irq_type = {
 	.end = dummy
 };
 
-static struct hw_interrupt_type SIGVTALRM_irq_type = {
+static struct irq_chip SIGVTALRM_irq_type = {
 	.typename = "SIGVTALRM",
 	.release = free_irq_by_irq_and_dev,
 	.shutdown = dummy, /* never called */
diff --git a/arch/um/sys-i386/stub.S b/arch/um/sys-i386/stub.S
index c41b04bf5fa..54a36ec20cb 100644
--- a/arch/um/sys-i386/stub.S
+++ b/arch/um/sys-i386/stub.S
@@ -1,7 +1,7 @@
 #include "as-layout.h"
 
 	.globl syscall_stub
-.section .__syscall_stub, "x"
+.section .__syscall_stub, "ax"
 
 	.globl batch_syscall_stub
 batch_syscall_stub:
diff --git a/arch/um/sys-x86_64/asm/elf.h b/arch/um/sys-x86_64/asm/elf.h
index 6e8a9195e95..04b9e87c8da 100644
--- a/arch/um/sys-x86_64/asm/elf.h
+++ b/arch/um/sys-x86_64/asm/elf.h
@@ -66,28 +66,28 @@ typedef struct user_i387_struct elf_fpregset_t;
 	PT_REGS_R15(regs) = 0; \
 } while (0)
 
-#define ELF_CORE_COPY_REGS(pr_reg, regs)		\
-	(pr_reg)[0] = (regs)->regs.gp[0];			\
-	(pr_reg)[1] = (regs)->regs.gp[1];			\
-	(pr_reg)[2] = (regs)->regs.gp[2];			\
-	(pr_reg)[3] = (regs)->regs.gp[3];			\
-	(pr_reg)[4] = (regs)->regs.gp[4];			\
-	(pr_reg)[5] = (regs)->regs.gp[5];			\
-	(pr_reg)[6] = (regs)->regs.gp[6];			\
-	(pr_reg)[7] = (regs)->regs.gp[7];			\
-	(pr_reg)[8] = (regs)->regs.gp[8];			\
-	(pr_reg)[9] = (regs)->regs.gp[9];			\
-	(pr_reg)[10] = (regs)->regs.gp[10];			\
-	(pr_reg)[11] = (regs)->regs.gp[11];			\
-	(pr_reg)[12] = (regs)->regs.gp[12];			\
-	(pr_reg)[13] = (regs)->regs.gp[13];			\
-	(pr_reg)[14] = (regs)->regs.gp[14];			\
-	(pr_reg)[15] = (regs)->regs.gp[15];			\
-	(pr_reg)[16] = (regs)->regs.gp[16];			\
-	(pr_reg)[17] = (regs)->regs.gp[17];			\
-	(pr_reg)[18] = (regs)->regs.gp[18];			\
-	(pr_reg)[19] = (regs)->regs.gp[19];			\
-	(pr_reg)[20] = (regs)->regs.gp[20];			\
+#define ELF_CORE_COPY_REGS(pr_reg, _regs)		\
+	(pr_reg)[0] = (_regs)->regs.gp[0];			\
+	(pr_reg)[1] = (_regs)->regs.gp[1];			\
+	(pr_reg)[2] = (_regs)->regs.gp[2];			\
+	(pr_reg)[3] = (_regs)->regs.gp[3];			\
+	(pr_reg)[4] = (_regs)->regs.gp[4];			\
+	(pr_reg)[5] = (_regs)->regs.gp[5];			\
+	(pr_reg)[6] = (_regs)->regs.gp[6];			\
+	(pr_reg)[7] = (_regs)->regs.gp[7];			\
+	(pr_reg)[8] = (_regs)->regs.gp[8];			\
+	(pr_reg)[9] = (_regs)->regs.gp[9];			\
+	(pr_reg)[10] = (_regs)->regs.gp[10];			\
+	(pr_reg)[11] = (_regs)->regs.gp[11];			\
+	(pr_reg)[12] = (_regs)->regs.gp[12];			\
+	(pr_reg)[13] = (_regs)->regs.gp[13];			\
+	(pr_reg)[14] = (_regs)->regs.gp[14];			\
+	(pr_reg)[15] = (_regs)->regs.gp[15];			\
+	(pr_reg)[16] = (_regs)->regs.gp[16];			\
+	(pr_reg)[17] = (_regs)->regs.gp[17];			\
+	(pr_reg)[18] = (_regs)->regs.gp[18];			\
+	(pr_reg)[19] = (_regs)->regs.gp[19];			\
+	(pr_reg)[20] = (_regs)->regs.gp[20];			\
 	(pr_reg)[21] = current->thread.arch.fs;			\
 	(pr_reg)[22] = 0;					\
 	(pr_reg)[23] = 0;					\
diff --git a/arch/um/sys-x86_64/stub.S b/arch/um/sys-x86_64/stub.S
index 6d9edf9fabc..20e4a96a6dc 100644
--- a/arch/um/sys-x86_64/stub.S
+++ b/arch/um/sys-x86_64/stub.S
@@ -1,7 +1,7 @@
 #include "as-layout.h"
 
 	.globl syscall_stub
-.section .__syscall_stub, "x"
+.section .__syscall_stub, "ax"
 syscall_stub:
 	syscall
 	/* We don't have 64-bit constants, so this constructs the address
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 356d2ec8e2f..cf42fc30541 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -46,6 +46,7 @@ config X86
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_ARCH_KMEMCHECK
 
 config OUTPUT_FORMAT
 	string
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index edbd0ca6206..1b68659c41b 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -81,6 +81,11 @@ ifdef CONFIG_CC_STACKPROTECTOR
         endif
 endif
 
+# Don't unroll struct assignments with kmemcheck enabled
+ifeq ($(CONFIG_KMEMCHECK),y)
+	KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy)
+endif
+
 # Stackpointer is addressed different for 32 bit and 64 bit x86
 sp-$(CONFIG_X86_32) := esp
 sp-$(CONFIG_X86_64) := rsp
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index f82fdc412c6..b93405b228b 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -6,6 +6,7 @@
  * Documentation/DMA-API.txt for documentation.
  */
 
+#include <linux/kmemcheck.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-debug.h>
 #include <linux/dma-attrs.h>
@@ -60,6 +61,7 @@ dma_map_single(struct device *hwdev, void *ptr, size_t size,
 	dma_addr_t addr;
 
 	BUG_ON(!valid_dma_direction(dir));
+	kmemcheck_mark_initialized(ptr, size);
 	addr = ops->map_page(hwdev, virt_to_page(ptr),
 			     (unsigned long)ptr & ~PAGE_MASK, size,
 			     dir, NULL);
@@ -87,8 +89,12 @@ dma_map_sg(struct device *hwdev, struct scatterlist *sg,
 {
 	struct dma_map_ops *ops = get_dma_ops(hwdev);
 	int ents;
+	struct scatterlist *s;
+	int i;
 
 	BUG_ON(!valid_dma_direction(dir));
+	for_each_sg(sg, s, nents, i)
+		kmemcheck_mark_initialized(sg_virt(s), s->length);
 	ents = ops->map_sg(hwdev, sg, nents, dir, NULL);
 	debug_dma_map_sg(hwdev, sg, nents, ents, dir);
 
@@ -200,6 +206,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	dma_addr_t addr;
 
 	BUG_ON(!valid_dma_direction(dir));
+	kmemcheck_mark_initialized(page_address(page) + offset, size);
 	addr = ops->map_page(dev, page, offset, size, dir, NULL);
 	debug_dma_map_page(dev, page, offset, size, dir, addr, false);
 
diff --git a/arch/x86/include/asm/kmap_types.h b/arch/x86/include/asm/kmap_types.h
index 5759c165a5c..9e00a731a7f 100644
--- a/arch/x86/include/asm/kmap_types.h
+++ b/arch/x86/include/asm/kmap_types.h
@@ -2,28 +2,11 @@
 #define _ASM_X86_KMAP_TYPES_H
 
 #if defined(CONFIG_X86_32) && defined(CONFIG_DEBUG_HIGHMEM)
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
+#define  __WITH_KM_FENCE
 #endif
 
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
-#undef D
+#undef __WITH_KM_FENCE
 
 #endif /* _ASM_X86_KMAP_TYPES_H */
diff --git a/arch/x86/include/asm/kmemcheck.h b/arch/x86/include/asm/kmemcheck.h
new file mode 100644
index 00000000000..ed01518f297
--- /dev/null
+++ b/arch/x86/include/asm/kmemcheck.h
@@ -0,0 +1,42 @@
+#ifndef ASM_X86_KMEMCHECK_H
+#define ASM_X86_KMEMCHECK_H
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_KMEMCHECK
+bool kmemcheck_active(struct pt_regs *regs);
+
+void kmemcheck_show(struct pt_regs *regs);
+void kmemcheck_hide(struct pt_regs *regs);
+
+bool kmemcheck_fault(struct pt_regs *regs,
+	unsigned long address, unsigned long error_code);
+bool kmemcheck_trap(struct pt_regs *regs);
+#else
+static inline bool kmemcheck_active(struct pt_regs *regs)
+{
+	return false;
+}
+
+static inline void kmemcheck_show(struct pt_regs *regs)
+{
+}
+
+static inline void kmemcheck_hide(struct pt_regs *regs)
+{
+}
+
+static inline bool kmemcheck_fault(struct pt_regs *regs,
+	unsigned long address, unsigned long error_code)
+{
+	return false;
+}
+
+static inline bool kmemcheck_trap(struct pt_regs *regs)
+{
+	return false;
+}
+#endif /* CONFIG_KMEMCHECK */
+
+#endif
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 18ef7ebf263..3cc06e3fceb 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -317,6 +317,11 @@ static inline int pte_present(pte_t a)
 	return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE);
 }
 
+static inline int pte_hidden(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_HIDDEN;
+}
+
 static inline int pmd_present(pmd_t pmd)
 {
 	return pmd_flags(pmd) & _PAGE_PRESENT;
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 4d258ad76a0..54cb697f490 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -18,7 +18,7 @@
 #define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
 #define _PAGE_BIT_UNUSED1	9	/* available for programmer */
 #define _PAGE_BIT_IOMAP		10	/* flag used to indicate IO mapping */
-#define _PAGE_BIT_UNUSED3	11
+#define _PAGE_BIT_HIDDEN	11	/* hidden by kmemcheck */
 #define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
 #define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
 #define _PAGE_BIT_CPA_TEST	_PAGE_BIT_UNUSED1
@@ -41,13 +41,18 @@
 #define _PAGE_GLOBAL	(_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
 #define _PAGE_UNUSED1	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
 #define _PAGE_IOMAP	(_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
-#define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
 #define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
 #define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
 #define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
 #define _PAGE_CPA_TEST	(_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
 #define __HAVE_ARCH_PTE_SPECIAL
 
+#ifdef CONFIG_KMEMCHECK
+#define _PAGE_HIDDEN	(_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
+#else
+#define _PAGE_HIDDEN	(_AT(pteval_t, 0))
+#endif
+
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 #define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
 #else
diff --git a/arch/x86/include/asm/string_32.h b/arch/x86/include/asm/string_32.h
index 0e0e3ba827f..c86f452256d 100644
--- a/arch/x86/include/asm/string_32.h
+++ b/arch/x86/include/asm/string_32.h
@@ -177,10 +177,18 @@ static inline void *__memcpy3d(void *to, const void *from, size_t len)
  *	No 3D Now!
  */
 
+#ifndef CONFIG_KMEMCHECK
 #define memcpy(t, f, n)				\
 	(__builtin_constant_p((n))		\
 	 ? __constant_memcpy((t), (f), (n))	\
 	 : __memcpy((t), (f), (n)))
+#else
+/*
+ * kmemcheck becomes very happy if we use the REP instructions unconditionally,
+ * because it means that we know both memory operands in advance.
+ */
+#define memcpy(t, f, n) __memcpy((t), (f), (n))
+#endif
 
 #endif
 
diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
index 2afe164bf1e..19e2c468fc2 100644
--- a/arch/x86/include/asm/string_64.h
+++ b/arch/x86/include/asm/string_64.h
@@ -27,6 +27,7 @@ static __always_inline void *__inline_memcpy(void *to, const void *from, size_t
    function. */
 
 #define __HAVE_ARCH_MEMCPY 1
+#ifndef CONFIG_KMEMCHECK
 #if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
 extern void *memcpy(void *to, const void *from, size_t len);
 #else
@@ -42,6 +43,13 @@ extern void *__memcpy(void *to, const void *from, size_t len);
 	__ret;							\
 })
 #endif
+#else
+/*
+ * kmemcheck becomes very happy if we use the REP instructions unconditionally,
+ * because it means that we know both memory operands in advance.
+ */
+#define memcpy(dst, src, len) __inline_memcpy((dst), (src), (len))
+#endif
 
 #define __HAVE_ARCH_MEMSET
 void *memset(void *s, int c, size_t n);
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 602c769fc98..b0783520988 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -154,9 +154,9 @@ struct thread_info {
 
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
-#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO)
+#define THREAD_FLAGS (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
 #else
-#define THREAD_FLAGS GFP_KERNEL
+#define THREAD_FLAGS (GFP_KERNEL | __GFP_NOTRACK)
 #endif
 
 #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
index b5c9d45c981..1375cfc9396 100644
--- a/arch/x86/include/asm/timex.h
+++ b/arch/x86/include/asm/timex.h
@@ -4,9 +4,7 @@
 #include <asm/processor.h>
 #include <asm/tsc.h>
 
-/* The PIT ticks at this frequency (in HZ): */
-#define PIT_TICK_RATE		1193182
-
+/* Assume we use the PIT time source for the clock tick */
 #define CLOCK_TICK_RATE		PIT_TICK_RATE
 
 #define ARCH_HAS_READ_CURRENT_TIMER
diff --git a/arch/x86/include/asm/xor.h b/arch/x86/include/asm/xor.h
index 11b3bb86e17..7fcf6f3dbcc 100644
--- a/arch/x86/include/asm/xor.h
+++ b/arch/x86/include/asm/xor.h
@@ -1,5 +1,10 @@
+#ifdef CONFIG_KMEMCHECK
+/* kmemcheck doesn't handle MMX/SSE/SSE2 instructions */
+# include <asm-generic/xor.h>
+#else
 #ifdef CONFIG_X86_32
 # include "xor_32.h"
 #else
 # include "xor_64.h"
 #endif
+#endif
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index ef0ae207a7c..096d19aea2f 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -463,7 +463,7 @@ static void uv_heartbeat(unsigned long ignored)
 	uv_set_scir_bits(bits);
 
 	/* enable next timer period */
-	mod_timer(timer, jiffies + SCIR_CPU_HB_INTERVAL);
+	mod_timer_pinned(timer, jiffies + SCIR_CPU_HB_INTERVAL);
 }
 
 static void __cpuinit uv_heartbeat_enable(int cpu)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3ffdcfa9abd..9fa33886c0d 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -487,7 +487,6 @@ out:
 static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
 {
 	char *v = c->x86_vendor_id;
-	static int printed;
 	int i;
 
 	for (i = 0; i < X86_VENDOR_NUM; i++) {
@@ -504,13 +503,9 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
 		}
 	}
 
-	if (!printed) {
-		printed++;
-		printk(KERN_ERR
-		    "CPU: vendor_id '%s' unknown, using generic init.\n", v);
-
-		printk(KERN_ERR "CPU: Your system may be unstable.\n");
-	}
+	printk_once(KERN_ERR
+			"CPU: vendor_id '%s' unknown, using generic init.\n" \
+			"CPU: Your system may be unstable.\n", v);
 
 	c->x86_vendor = X86_VENDOR_UNKNOWN;
 	this_cpu = &default_cpu;
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index daed39ba261..3260ab04499 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -86,6 +86,29 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 	 */
 	if (c->x86 == 6 && c->x86_model < 15)
 		clear_cpu_cap(c, X86_FEATURE_PAT);
+
+#ifdef CONFIG_KMEMCHECK
+	/*
+	 * P4s have a "fast strings" feature which causes single-
+	 * stepping REP instructions to only generate a #DB on
+	 * cache-line boundaries.
+	 *
+	 * Ingo Molnar reported a Pentium D (model 6) and a Xeon
+	 * (model 2) with the same problem.
+	 */
+	if (c->x86 == 15) {
+		u64 misc_enable;
+
+		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+
+		if (misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING) {
+			printk(KERN_INFO "kmemcheck: Disabling fast string operations\n");
+
+			misc_enable &= ~MSR_IA32_MISC_ENABLE_FAST_STRING;
+			wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+		}
+	}
+#endif
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 2ac1f0c2beb..b07af886124 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -182,6 +182,11 @@ static struct notifier_block __refdata cpuid_class_cpu_notifier =
 	.notifier_call = cpuid_class_cpu_callback,
 };
 
+static char *cpuid_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "cpu/%u/cpuid", MINOR(dev->devt));
+}
+
 static int __init cpuid_init(void)
 {
 	int i, err = 0;
@@ -198,6 +203,7 @@ static int __init cpuid_init(void)
 		err = PTR_ERR(cpuid_class);
 		goto out_chrdev;
 	}
+	cpuid_class->nodename = cpuid_nodename;
 	for_each_online_cpu(i) {
 		err = cpuid_device_create(i);
 		if (err != 0)
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index c2e0bb0890d..5cf36c053ac 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -7,6 +7,7 @@
 #include <linux/spinlock.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
+#include <linux/timex.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index df3bf269bea..270ff83efc1 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -12,7 +12,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
 
 /*
  * Initial thread structure.
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 9c4461501fc..9371448290a 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -236,6 +236,7 @@ static const struct file_operations microcode_fops = {
 static struct miscdevice microcode_dev = {
 	.minor			= MICROCODE_MINOR,
 	.name			= "microcode",
+	.devnode		= "cpu/microcode",
 	.fops			= &microcode_fops,
 };
 
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 3cf3413ec62..98fd6cd4e3a 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -196,6 +196,11 @@ static struct notifier_block __refdata msr_class_cpu_notifier = {
 	.notifier_call = msr_class_cpu_callback,
 };
 
+static char *msr_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "cpu/%u/msr", MINOR(dev->devt));
+}
+
 static int __init msr_init(void)
 {
 	int i, err = 0;
@@ -212,6 +217,7 @@ static int __init msr_init(void)
 		err = PTR_ERR(msr_class);
 		goto out_chrdev;
 	}
+	msr_class->nodename = msr_nodename;
 	for_each_online_cpu(i) {
 		err = msr_device_create(i);
 		if (err != 0)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 3bb2be1649b..994dd6a4a2a 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -63,7 +63,7 @@ void arch_task_cache_init(void)
         task_xstate_cachep =
         	kmem_cache_create("task_xstate", xstate_size,
 				  __alignof__(union thread_xstate),
-				  SLAB_PANIC, NULL);
+				  SLAB_PANIC | SLAB_NOTRACK, NULL);
 }
 
 /*
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 4aaf7e48394..c3eb207181f 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -77,6 +77,13 @@ void save_stack_trace(struct stack_trace *trace)
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
+void save_stack_trace_bp(struct stack_trace *trace, unsigned long bp)
+{
+	dump_trace(current, NULL, NULL, bp, &save_stack_ops, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	dump_trace(tsk, NULL, NULL, 0, &save_stack_ops_nosched, trace);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 1e1e27b7d43..5f935f0d586 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -45,6 +45,7 @@
 #include <linux/edac.h>
 #endif
 
+#include <asm/kmemcheck.h>
 #include <asm/stacktrace.h>
 #include <asm/processor.h>
 #include <asm/debugreg.h>
@@ -534,6 +535,10 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 
 	get_debugreg(condition, 6);
 
+	/* Catch kmemcheck conditions first of all! */
+	if (condition & DR_STEP && kmemcheck_trap(regs))
+		return;
+
 	/*
 	 * The processor cleared BTF, so don't mark that we need it set.
 	 */
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 3e1c057e98f..ae3180c506a 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -9,6 +9,7 @@
 #include <linux/delay.h>
 #include <linux/clocksource.h>
 #include <linux/percpu.h>
+#include <linux/timex.h>
 
 #include <asm/hpet.h>
 #include <asm/timer.h>
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 32d6ae8fb60..e770bf349ec 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1277,7 +1277,7 @@ static struct vmcs *alloc_vmcs_cpu(int cpu)
 	struct page *pages;
 	struct vmcs *vmcs;
 
-	pages = alloc_pages_node(node, GFP_KERNEL, vmcs_config.order);
+	pages = alloc_pages_exact_node(node, GFP_KERNEL, vmcs_config.order);
 	if (!pages)
 		return NULL;
 	vmcs = page_address(pages);
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index fdd30d08ab5..eefdeee8a87 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_X86_PTDUMP)	+= dump_pagetables.o
 
 obj-$(CONFIG_HIGHMEM)		+= highmem_32.o
 
+obj-$(CONFIG_KMEMCHECK)		+= kmemcheck/
+
 obj-$(CONFIG_MMIOTRACE)		+= mmiotrace.o
 mmiotrace-y			:= kmmio.o pf_in.o mmio-mod.o
 obj-$(CONFIG_MMIOTRACE_TEST)	+= testmmiotrace.o
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index c6acc632637..baa0e86adfb 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -14,6 +14,7 @@
 
 #include <asm/traps.h>			/* dotraplinkage, ...		*/
 #include <asm/pgalloc.h>		/* pgd_*(), ...			*/
+#include <asm/kmemcheck.h>		/* kmemcheck_*(), ...		*/
 
 /*
  * Page fault error code bits:
@@ -956,6 +957,13 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	/* Get the faulting address: */
 	address = read_cr2();
 
+	/*
+	 * Detect and handle instructions that would cause a page fault for
+	 * both a tracked kernel page and a userspace page.
+	 */
+	if (kmemcheck_active(regs))
+		kmemcheck_hide(regs);
+
 	if (unlikely(kmmio_fault(regs, address)))
 		return;
 
@@ -973,9 +981,13 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 * protection error (error_code & 9) == 0.
 	 */
 	if (unlikely(fault_in_kernel_space(address))) {
-		if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
-		    vmalloc_fault(address) >= 0)
-			return;
+		if (!(error_code & (PF_RSVD | PF_USER | PF_PROT))) {
+			if (vmalloc_fault(address) >= 0)
+				return;
+
+			if (kmemcheck_fault(regs, address, error_code))
+				return;
+		}
 
 		/* Can handle a stale RO->RW TLB: */
 		if (spurious_fault(error_code, address))
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 34c1bfb64f1..f53b57e4086 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -213,7 +213,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	if (!after_bootmem)
 		init_gbpages();
 
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
 	/*
 	 * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
 	 * This will simplify cpa(), which otherwise needs to support splitting
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 9ff3c0816d1..3cd7711bb94 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -111,7 +111,7 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
 		pte_t *page_table = NULL;
 
 		if (after_bootmem) {
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
 			page_table = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
 #endif
 			if (!page_table)
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 52bb9519bb8..9c543290a81 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -104,7 +104,7 @@ static __ref void *spp_getpage(void)
 	void *ptr;
 
 	if (after_bootmem)
-		ptr = (void *) get_zeroed_page(GFP_ATOMIC);
+		ptr = (void *) get_zeroed_page(GFP_ATOMIC | __GFP_NOTRACK);
 	else
 		ptr = alloc_bootmem_pages(PAGE_SIZE);
 
@@ -281,7 +281,7 @@ static __ref void *alloc_low_page(unsigned long *phys)
 	void *adr;
 
 	if (after_bootmem) {
-		adr = (void *)get_zeroed_page(GFP_ATOMIC);
+		adr = (void *)get_zeroed_page(GFP_ATOMIC | __GFP_NOTRACK);
 		*phys = __pa(adr);
 
 		return adr;
diff --git a/arch/x86/mm/kmemcheck/Makefile b/arch/x86/mm/kmemcheck/Makefile
new file mode 100644
index 00000000000..520b3bce409
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/Makefile
@@ -0,0 +1 @@
+obj-y := error.o kmemcheck.o opcode.o pte.o selftest.o shadow.o
diff --git a/arch/x86/mm/kmemcheck/error.c b/arch/x86/mm/kmemcheck/error.c
new file mode 100644
index 00000000000..4901d0dafda
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/error.c
@@ -0,0 +1,228 @@
+#include <linux/interrupt.h>
+#include <linux/kdebug.h>
+#include <linux/kmemcheck.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/stacktrace.h>
+#include <linux/string.h>
+
+#include "error.h"
+#include "shadow.h"
+
+enum kmemcheck_error_type {
+	KMEMCHECK_ERROR_INVALID_ACCESS,
+	KMEMCHECK_ERROR_BUG,
+};
+
+#define SHADOW_COPY_SIZE (1 << CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT)
+
+struct kmemcheck_error {
+	enum kmemcheck_error_type type;
+
+	union {
+		/* KMEMCHECK_ERROR_INVALID_ACCESS */
+		struct {
+			/* Kind of access that caused the error */
+			enum kmemcheck_shadow state;
+			/* Address and size of the erroneous read */
+			unsigned long	address;
+			unsigned int	size;
+		};
+	};
+
+	struct pt_regs		regs;
+	struct stack_trace	trace;
+	unsigned long		trace_entries[32];
+
+	/* We compress it to a char. */
+	unsigned char		shadow_copy[SHADOW_COPY_SIZE];
+	unsigned char		memory_copy[SHADOW_COPY_SIZE];
+};
+
+/*
+ * Create a ring queue of errors to output. We can't call printk() directly
+ * from the kmemcheck traps, since this may call the console drivers and
+ * result in a recursive fault.
+ */
+static struct kmemcheck_error error_fifo[CONFIG_KMEMCHECK_QUEUE_SIZE];
+static unsigned int error_count;
+static unsigned int error_rd;
+static unsigned int error_wr;
+static unsigned int error_missed_count;
+
+static struct kmemcheck_error *error_next_wr(void)
+{
+	struct kmemcheck_error *e;
+
+	if (error_count == ARRAY_SIZE(error_fifo)) {
+		++error_missed_count;
+		return NULL;
+	}
+
+	e = &error_fifo[error_wr];
+	if (++error_wr == ARRAY_SIZE(error_fifo))
+		error_wr = 0;
+	++error_count;
+	return e;
+}
+
+static struct kmemcheck_error *error_next_rd(void)
+{
+	struct kmemcheck_error *e;
+
+	if (error_count == 0)
+		return NULL;
+
+	e = &error_fifo[error_rd];
+	if (++error_rd == ARRAY_SIZE(error_fifo))
+		error_rd = 0;
+	--error_count;
+	return e;
+}
+
+void kmemcheck_error_recall(void)
+{
+	static const char *desc[] = {
+		[KMEMCHECK_SHADOW_UNALLOCATED]		= "unallocated",
+		[KMEMCHECK_SHADOW_UNINITIALIZED]	= "uninitialized",
+		[KMEMCHECK_SHADOW_INITIALIZED]		= "initialized",
+		[KMEMCHECK_SHADOW_FREED]		= "freed",
+	};
+
+	static const char short_desc[] = {
+		[KMEMCHECK_SHADOW_UNALLOCATED]		= 'a',
+		[KMEMCHECK_SHADOW_UNINITIALIZED]	= 'u',
+		[KMEMCHECK_SHADOW_INITIALIZED]		= 'i',
+		[KMEMCHECK_SHADOW_FREED]		= 'f',
+	};
+
+	struct kmemcheck_error *e;
+	unsigned int i;
+
+	e = error_next_rd();
+	if (!e)
+		return;
+
+	switch (e->type) {
+	case KMEMCHECK_ERROR_INVALID_ACCESS:
+		printk(KERN_ERR  "WARNING: kmemcheck: Caught %d-bit read "
+			"from %s memory (%p)\n",
+			8 * e->size, e->state < ARRAY_SIZE(desc) ?
+				desc[e->state] : "(invalid shadow state)",
+			(void *) e->address);
+
+		printk(KERN_INFO);
+		for (i = 0; i < SHADOW_COPY_SIZE; ++i)
+			printk("%02x", e->memory_copy[i]);
+		printk("\n");
+
+		printk(KERN_INFO);
+		for (i = 0; i < SHADOW_COPY_SIZE; ++i) {
+			if (e->shadow_copy[i] < ARRAY_SIZE(short_desc))
+				printk(" %c", short_desc[e->shadow_copy[i]]);
+			else
+				printk(" ?");
+		}
+		printk("\n");
+		printk(KERN_INFO "%*c\n", 2 + 2
+			* (int) (e->address & (SHADOW_COPY_SIZE - 1)), '^');
+		break;
+	case KMEMCHECK_ERROR_BUG:
+		printk(KERN_EMERG "ERROR: kmemcheck: Fatal error\n");
+		break;
+	}
+
+	__show_regs(&e->regs, 1);
+	print_stack_trace(&e->trace, 0);
+}
+
+static void do_wakeup(unsigned long data)
+{
+	while (error_count > 0)
+		kmemcheck_error_recall();
+
+	if (error_missed_count > 0) {
+		printk(KERN_WARNING "kmemcheck: Lost %d error reports because "
+			"the queue was too small\n", error_missed_count);
+		error_missed_count = 0;
+	}
+}
+
+static DECLARE_TASKLET(kmemcheck_tasklet, &do_wakeup, 0);
+
+/*
+ * Save the context of an error report.
+ */
+void kmemcheck_error_save(enum kmemcheck_shadow state,
+	unsigned long address, unsigned int size, struct pt_regs *regs)
+{
+	static unsigned long prev_ip;
+
+	struct kmemcheck_error *e;
+	void *shadow_copy;
+	void *memory_copy;
+
+	/* Don't report several adjacent errors from the same EIP. */
+	if (regs->ip == prev_ip)
+		return;
+	prev_ip = regs->ip;
+
+	e = error_next_wr();
+	if (!e)
+		return;
+
+	e->type = KMEMCHECK_ERROR_INVALID_ACCESS;
+
+	e->state = state;
+	e->address = address;
+	e->size = size;
+
+	/* Save regs */
+	memcpy(&e->regs, regs, sizeof(*regs));
+
+	/* Save stack trace */
+	e->trace.nr_entries = 0;
+	e->trace.entries = e->trace_entries;
+	e->trace.max_entries = ARRAY_SIZE(e->trace_entries);
+	e->trace.skip = 0;
+	save_stack_trace_bp(&e->trace, regs->bp);
+
+	/* Round address down to nearest 16 bytes */
+	shadow_copy = kmemcheck_shadow_lookup(address
+		& ~(SHADOW_COPY_SIZE - 1));
+	BUG_ON(!shadow_copy);
+
+	memcpy(e->shadow_copy, shadow_copy, SHADOW_COPY_SIZE);
+
+	kmemcheck_show_addr(address);
+	memory_copy = (void *) (address & ~(SHADOW_COPY_SIZE - 1));
+	memcpy(e->memory_copy, memory_copy, SHADOW_COPY_SIZE);
+	kmemcheck_hide_addr(address);
+
+	tasklet_hi_schedule_first(&kmemcheck_tasklet);
+}
+
+/*
+ * Save the context of a kmemcheck bug.
+ */
+void kmemcheck_error_save_bug(struct pt_regs *regs)
+{
+	struct kmemcheck_error *e;
+
+	e = error_next_wr();
+	if (!e)
+		return;
+
+	e->type = KMEMCHECK_ERROR_BUG;
+
+	memcpy(&e->regs, regs, sizeof(*regs));
+
+	e->trace.nr_entries = 0;
+	e->trace.entries = e->trace_entries;
+	e->trace.max_entries = ARRAY_SIZE(e->trace_entries);
+	e->trace.skip = 1;
+	save_stack_trace(&e->trace);
+
+	tasklet_hi_schedule_first(&kmemcheck_tasklet);
+}
diff --git a/arch/x86/mm/kmemcheck/error.h b/arch/x86/mm/kmemcheck/error.h
new file mode 100644
index 00000000000..0efc2e8d0a2
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/error.h
@@ -0,0 +1,15 @@
+#ifndef ARCH__X86__MM__KMEMCHECK__ERROR_H
+#define ARCH__X86__MM__KMEMCHECK__ERROR_H
+
+#include <linux/ptrace.h>
+
+#include "shadow.h"
+
+void kmemcheck_error_save(enum kmemcheck_shadow state,
+	unsigned long address, unsigned int size, struct pt_regs *regs);
+
+void kmemcheck_error_save_bug(struct pt_regs *regs);
+
+void kmemcheck_error_recall(void);
+
+#endif
diff --git a/arch/x86/mm/kmemcheck/kmemcheck.c b/arch/x86/mm/kmemcheck/kmemcheck.c
new file mode 100644
index 00000000000..2c55ed09865
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/kmemcheck.c
@@ -0,0 +1,640 @@
+/**
+ * kmemcheck - a heavyweight memory checker for the linux kernel
+ * Copyright (C) 2007, 2008  Vegard Nossum <vegardno@ifi.uio.no>
+ * (With a lot of help from Ingo Molnar and Pekka Enberg.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/page-flags.h>
+#include <linux/percpu.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/cacheflush.h>
+#include <asm/kmemcheck.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+#include "error.h"
+#include "opcode.h"
+#include "pte.h"
+#include "selftest.h"
+#include "shadow.h"
+
+
+#ifdef CONFIG_KMEMCHECK_DISABLED_BY_DEFAULT
+#  define KMEMCHECK_ENABLED 0
+#endif
+
+#ifdef CONFIG_KMEMCHECK_ENABLED_BY_DEFAULT
+#  define KMEMCHECK_ENABLED 1
+#endif
+
+#ifdef CONFIG_KMEMCHECK_ONESHOT_BY_DEFAULT
+#  define KMEMCHECK_ENABLED 2
+#endif
+
+int kmemcheck_enabled = KMEMCHECK_ENABLED;
+
+int __init kmemcheck_init(void)
+{
+#ifdef CONFIG_SMP
+	/*
+	 * Limit SMP to use a single CPU. We rely on the fact that this code
+	 * runs before SMP is set up.
+	 */
+	if (setup_max_cpus > 1) {
+		printk(KERN_INFO
+			"kmemcheck: Limiting number of CPUs to 1.\n");
+		setup_max_cpus = 1;
+	}
+#endif
+
+	if (!kmemcheck_selftest()) {
+		printk(KERN_INFO "kmemcheck: self-tests failed; disabling\n");
+		kmemcheck_enabled = 0;
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "kmemcheck: Initialized\n");
+	return 0;
+}
+
+early_initcall(kmemcheck_init);
+
+/*
+ * We need to parse the kmemcheck= option before any memory is allocated.
+ */
+static int __init param_kmemcheck(char *str)
+{
+	if (!str)
+		return -EINVAL;
+
+	sscanf(str, "%d", &kmemcheck_enabled);
+	return 0;
+}
+
+early_param("kmemcheck", param_kmemcheck);
+
+int kmemcheck_show_addr(unsigned long address)
+{
+	pte_t *pte;
+
+	pte = kmemcheck_pte_lookup(address);
+	if (!pte)
+		return 0;
+
+	set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
+	__flush_tlb_one(address);
+	return 1;
+}
+
+int kmemcheck_hide_addr(unsigned long address)
+{
+	pte_t *pte;
+
+	pte = kmemcheck_pte_lookup(address);
+	if (!pte)
+		return 0;
+
+	set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
+	__flush_tlb_one(address);
+	return 1;
+}
+
+struct kmemcheck_context {
+	bool busy;
+	int balance;
+
+	/*
+	 * There can be at most two memory operands to an instruction, but
+	 * each address can cross a page boundary -- so we may need up to
+	 * four addresses that must be hidden/revealed for each fault.
+	 */
+	unsigned long addr[4];
+	unsigned long n_addrs;
+	unsigned long flags;
+
+	/* Data size of the instruction that caused a fault. */
+	unsigned int size;
+};
+
+static DEFINE_PER_CPU(struct kmemcheck_context, kmemcheck_context);
+
+bool kmemcheck_active(struct pt_regs *regs)
+{
+	struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+
+	return data->balance > 0;
+}
+
+/* Save an address that needs to be shown/hidden */
+static void kmemcheck_save_addr(unsigned long addr)
+{
+	struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+
+	BUG_ON(data->n_addrs >= ARRAY_SIZE(data->addr));
+	data->addr[data->n_addrs++] = addr;
+}
+
+static unsigned int kmemcheck_show_all(void)
+{
+	struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+	unsigned int i;
+	unsigned int n;
+
+	n = 0;
+	for (i = 0; i < data->n_addrs; ++i)
+		n += kmemcheck_show_addr(data->addr[i]);
+
+	return n;
+}
+
+static unsigned int kmemcheck_hide_all(void)
+{
+	struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+	unsigned int i;
+	unsigned int n;
+
+	n = 0;
+	for (i = 0; i < data->n_addrs; ++i)
+		n += kmemcheck_hide_addr(data->addr[i]);
+
+	return n;
+}
+
+/*
+ * Called from the #PF handler.
+ */
+void kmemcheck_show(struct pt_regs *regs)
+{
+	struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+
+	BUG_ON(!irqs_disabled());
+
+	if (unlikely(data->balance != 0)) {
+		kmemcheck_show_all();
+		kmemcheck_error_save_bug(regs);
+		data->balance = 0;
+		return;
+	}
+
+	/*
+	 * None of the addresses actually belonged to kmemcheck. Note that
+	 * this is not an error.
+	 */
+	if (kmemcheck_show_all() == 0)
+		return;
+
+	++data->balance;
+
+	/*
+	 * The IF needs to be cleared as well, so that the faulting
+	 * instruction can run "uninterrupted". Otherwise, we might take
+	 * an interrupt and start executing that before we've had a chance
+	 * to hide the page again.
+	 *
+	 * NOTE: In the rare case of multiple faults, we must not override
+	 * the original flags:
+	 */
+	if (!(regs->flags & X86_EFLAGS_TF))
+		data->flags = regs->flags;
+
+	regs->flags |= X86_EFLAGS_TF;
+	regs->flags &= ~X86_EFLAGS_IF;
+}
+
+/*
+ * Called from the #DB handler.
+ */
+void kmemcheck_hide(struct pt_regs *regs)
+{
+	struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+	int n;
+
+	BUG_ON(!irqs_disabled());
+
+	if (data->balance == 0)
+		return;
+
+	if (unlikely(data->balance != 1)) {
+		kmemcheck_show_all();
+		kmemcheck_error_save_bug(regs);
+		data->n_addrs = 0;
+		data->balance = 0;
+
+		if (!(data->flags & X86_EFLAGS_TF))
+			regs->flags &= ~X86_EFLAGS_TF;
+		if (data->flags & X86_EFLAGS_IF)
+			regs->flags |= X86_EFLAGS_IF;
+		return;
+	}
+
+	if (kmemcheck_enabled)
+		n = kmemcheck_hide_all();
+	else
+		n = kmemcheck_show_all();
+
+	if (n == 0)
+		return;
+
+	--data->balance;
+
+	data->n_addrs = 0;
+
+	if (!(data->flags & X86_EFLAGS_TF))
+		regs->flags &= ~X86_EFLAGS_TF;
+	if (data->flags & X86_EFLAGS_IF)
+		regs->flags |= X86_EFLAGS_IF;
+}
+
+void kmemcheck_show_pages(struct page *p, unsigned int n)
+{
+	unsigned int i;
+
+	for (i = 0; i < n; ++i) {
+		unsigned long address;
+		pte_t *pte;
+		unsigned int level;
+
+		address = (unsigned long) page_address(&p[i]);
+		pte = lookup_address(address, &level);
+		BUG_ON(!pte);
+		BUG_ON(level != PG_LEVEL_4K);
+
+		set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
+		set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_HIDDEN));
+		__flush_tlb_one(address);
+	}
+}
+
+bool kmemcheck_page_is_tracked(struct page *p)
+{
+	/* This will also check the "hidden" flag of the PTE. */
+	return kmemcheck_pte_lookup((unsigned long) page_address(p));
+}
+
+void kmemcheck_hide_pages(struct page *p, unsigned int n)
+{
+	unsigned int i;
+
+	for (i = 0; i < n; ++i) {
+		unsigned long address;
+		pte_t *pte;
+		unsigned int level;
+
+		address = (unsigned long) page_address(&p[i]);
+		pte = lookup_address(address, &level);
+		BUG_ON(!pte);
+		BUG_ON(level != PG_LEVEL_4K);
+
+		set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
+		set_pte(pte, __pte(pte_val(*pte) | _PAGE_HIDDEN));
+		__flush_tlb_one(address);
+	}
+}
+
+/* Access may NOT cross page boundary */
+static void kmemcheck_read_strict(struct pt_regs *regs,
+	unsigned long addr, unsigned int size)
+{
+	void *shadow;
+	enum kmemcheck_shadow status;
+
+	shadow = kmemcheck_shadow_lookup(addr);
+	if (!shadow)
+		return;
+
+	kmemcheck_save_addr(addr);
+	status = kmemcheck_shadow_test(shadow, size);
+	if (status == KMEMCHECK_SHADOW_INITIALIZED)
+		return;
+
+	if (kmemcheck_enabled)
+		kmemcheck_error_save(status, addr, size, regs);
+
+	if (kmemcheck_enabled == 2)
+		kmemcheck_enabled = 0;
+
+	/* Don't warn about it again. */
+	kmemcheck_shadow_set(shadow, size);
+}
+
+/* Access may cross page boundary */
+static void kmemcheck_read(struct pt_regs *regs,
+	unsigned long addr, unsigned int size)
+{
+	unsigned long page = addr & PAGE_MASK;
+	unsigned long next_addr = addr + size - 1;
+	unsigned long next_page = next_addr & PAGE_MASK;
+
+	if (likely(page == next_page)) {
+		kmemcheck_read_strict(regs, addr, size);
+		return;
+	}
+
+	/*
+	 * What we do is basically to split the access across the
+	 * two pages and handle each part separately. Yes, this means
+	 * that we may now see reads that are 3 + 5 bytes, for
+	 * example (and if both are uninitialized, there will be two
+	 * reports), but it makes the code a lot simpler.
+	 */
+	kmemcheck_read_strict(regs, addr, next_page - addr);
+	kmemcheck_read_strict(regs, next_page, next_addr - next_page);
+}
+
+static void kmemcheck_write_strict(struct pt_regs *regs,
+	unsigned long addr, unsigned int size)
+{
+	void *shadow;
+
+	shadow = kmemcheck_shadow_lookup(addr);
+	if (!shadow)
+		return;
+
+	kmemcheck_save_addr(addr);
+	kmemcheck_shadow_set(shadow, size);
+}
+
+static void kmemcheck_write(struct pt_regs *regs,
+	unsigned long addr, unsigned int size)
+{
+	unsigned long page = addr & PAGE_MASK;
+	unsigned long next_addr = addr + size - 1;
+	unsigned long next_page = next_addr & PAGE_MASK;
+
+	if (likely(page == next_page)) {
+		kmemcheck_write_strict(regs, addr, size);
+		return;
+	}
+
+	/* See comment in kmemcheck_read(). */
+	kmemcheck_write_strict(regs, addr, next_page - addr);
+	kmemcheck_write_strict(regs, next_page, next_addr - next_page);
+}
+
+/*
+ * Copying is hard. We have two addresses, each of which may be split across
+ * a page (and each page will have different shadow addresses).
+ */
+static void kmemcheck_copy(struct pt_regs *regs,
+	unsigned long src_addr, unsigned long dst_addr, unsigned int size)
+{
+	uint8_t shadow[8];
+	enum kmemcheck_shadow status;
+
+	unsigned long page;
+	unsigned long next_addr;
+	unsigned long next_page;
+
+	uint8_t *x;
+	unsigned int i;
+	unsigned int n;
+
+	BUG_ON(size > sizeof(shadow));
+
+	page = src_addr & PAGE_MASK;
+	next_addr = src_addr + size - 1;
+	next_page = next_addr & PAGE_MASK;
+
+	if (likely(page == next_page)) {
+		/* Same page */
+		x = kmemcheck_shadow_lookup(src_addr);
+		if (x) {
+			kmemcheck_save_addr(src_addr);
+			for (i = 0; i < size; ++i)
+				shadow[i] = x[i];
+		} else {
+			for (i = 0; i < size; ++i)
+				shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+		}
+	} else {
+		n = next_page - src_addr;
+		BUG_ON(n > sizeof(shadow));
+
+		/* First page */
+		x = kmemcheck_shadow_lookup(src_addr);
+		if (x) {
+			kmemcheck_save_addr(src_addr);
+			for (i = 0; i < n; ++i)
+				shadow[i] = x[i];
+		} else {
+			/* Not tracked */
+			for (i = 0; i < n; ++i)
+				shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+		}
+
+		/* Second page */
+		x = kmemcheck_shadow_lookup(next_page);
+		if (x) {
+			kmemcheck_save_addr(next_page);
+			for (i = n; i < size; ++i)
+				shadow[i] = x[i - n];
+		} else {
+			/* Not tracked */
+			for (i = n; i < size; ++i)
+				shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+		}
+	}
+
+	page = dst_addr & PAGE_MASK;
+	next_addr = dst_addr + size - 1;
+	next_page = next_addr & PAGE_MASK;
+
+	if (likely(page == next_page)) {
+		/* Same page */
+		x = kmemcheck_shadow_lookup(dst_addr);
+		if (x) {
+			kmemcheck_save_addr(dst_addr);
+			for (i = 0; i < size; ++i) {
+				x[i] = shadow[i];
+				shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+			}
+		}
+	} else {
+		n = next_page - dst_addr;
+		BUG_ON(n > sizeof(shadow));
+
+		/* First page */
+		x = kmemcheck_shadow_lookup(dst_addr);
+		if (x) {
+			kmemcheck_save_addr(dst_addr);
+			for (i = 0; i < n; ++i) {
+				x[i] = shadow[i];
+				shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+			}
+		}
+
+		/* Second page */
+		x = kmemcheck_shadow_lookup(next_page);
+		if (x) {
+			kmemcheck_save_addr(next_page);
+			for (i = n; i < size; ++i) {
+				x[i - n] = shadow[i];
+				shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
+			}
+		}
+	}
+
+	status = kmemcheck_shadow_test(shadow, size);
+	if (status == KMEMCHECK_SHADOW_INITIALIZED)
+		return;
+
+	if (kmemcheck_enabled)
+		kmemcheck_error_save(status, src_addr, size, regs);
+
+	if (kmemcheck_enabled == 2)
+		kmemcheck_enabled = 0;
+}
+
+enum kmemcheck_method {
+	KMEMCHECK_READ,
+	KMEMCHECK_WRITE,
+};
+
+static void kmemcheck_access(struct pt_regs *regs,
+	unsigned long fallback_address, enum kmemcheck_method fallback_method)
+{
+	const uint8_t *insn;
+	const uint8_t *insn_primary;
+	unsigned int size;
+
+	struct kmemcheck_context *data = &__get_cpu_var(kmemcheck_context);
+
+	/* Recursive fault -- ouch. */
+	if (data->busy) {
+		kmemcheck_show_addr(fallback_address);
+		kmemcheck_error_save_bug(regs);
+		return;
+	}
+
+	data->busy = true;
+
+	insn = (const uint8_t *) regs->ip;
+	insn_primary = kmemcheck_opcode_get_primary(insn);
+
+	kmemcheck_opcode_decode(insn, &size);
+
+	switch (insn_primary[0]) {
+#ifdef CONFIG_KMEMCHECK_BITOPS_OK
+		/* AND, OR, XOR */
+		/*
+		 * Unfortunately, these instructions have to be excluded from
+		 * our regular checking since they access only some (and not
+		 * all) bits. This clears out "bogus" bitfield-access warnings.
+		 */
+	case 0x80:
+	case 0x81:
+	case 0x82:
+	case 0x83:
+		switch ((insn_primary[1] >> 3) & 7) {
+			/* OR */
+		case 1:
+			/* AND */
+		case 4:
+			/* XOR */
+		case 6:
+			kmemcheck_write(regs, fallback_address, size);
+			goto out;
+
+			/* ADD */
+		case 0:
+			/* ADC */
+		case 2:
+			/* SBB */
+		case 3:
+			/* SUB */
+		case 5:
+			/* CMP */
+		case 7:
+			break;
+		}
+		break;
+#endif
+
+		/* MOVS, MOVSB, MOVSW, MOVSD */
+	case 0xa4:
+	case 0xa5:
+		/*
+		 * These instructions are special because they take two
+		 * addresses, but we only get one page fault.
+		 */
+		kmemcheck_copy(regs, regs->si, regs->di, size);
+		goto out;
+
+		/* CMPS, CMPSB, CMPSW, CMPSD */
+	case 0xa6:
+	case 0xa7:
+		kmemcheck_read(regs, regs->si, size);
+		kmemcheck_read(regs, regs->di, size);
+		goto out;
+	}
+
+	/*
+	 * If the opcode isn't special in any way, we use the data from the
+	 * page fault handler to determine the address and type of memory
+	 * access.
+	 */
+	switch (fallback_method) {
+	case KMEMCHECK_READ:
+		kmemcheck_read(regs, fallback_address, size);
+		goto out;
+	case KMEMCHECK_WRITE:
+		kmemcheck_write(regs, fallback_address, size);
+		goto out;
+	}
+
+out:
+	data->busy = false;
+}
+
+bool kmemcheck_fault(struct pt_regs *regs, unsigned long address,
+	unsigned long error_code)
+{
+	pte_t *pte;
+
+	/*
+	 * XXX: Is it safe to assume that memory accesses from virtual 86
+	 * mode or non-kernel code segments will _never_ access kernel
+	 * memory (e.g. tracked pages)? For now, we need this to avoid
+	 * invoking kmemcheck for PnP BIOS calls.
+	 */
+	if (regs->flags & X86_VM_MASK)
+		return false;
+	if (regs->cs != __KERNEL_CS)
+		return false;
+
+	pte = kmemcheck_pte_lookup(address);
+	if (!pte)
+		return false;
+
+	if (error_code & 2)
+		kmemcheck_access(regs, address, KMEMCHECK_WRITE);
+	else
+		kmemcheck_access(regs, address, KMEMCHECK_READ);
+
+	kmemcheck_show(regs);
+	return true;
+}
+
+bool kmemcheck_trap(struct pt_regs *regs)
+{
+	if (!kmemcheck_active(regs))
+		return false;
+
+	/* We're done. */
+	kmemcheck_hide(regs);
+	return true;
+}
diff --git a/arch/x86/mm/kmemcheck/opcode.c b/arch/x86/mm/kmemcheck/opcode.c
new file mode 100644
index 00000000000..63c19e27aa6
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/opcode.c
@@ -0,0 +1,106 @@
+#include <linux/types.h>
+
+#include "opcode.h"
+
+static bool opcode_is_prefix(uint8_t b)
+{
+	return
+		/* Group 1 */
+		b == 0xf0 || b == 0xf2 || b == 0xf3
+		/* Group 2 */
+		|| b == 0x2e || b == 0x36 || b == 0x3e || b == 0x26
+		|| b == 0x64 || b == 0x65 || b == 0x2e || b == 0x3e
+		/* Group 3 */
+		|| b == 0x66
+		/* Group 4 */
+		|| b == 0x67;
+}
+
+#ifdef CONFIG_X86_64
+static bool opcode_is_rex_prefix(uint8_t b)
+{
+	return (b & 0xf0) == 0x40;
+}
+#else
+static bool opcode_is_rex_prefix(uint8_t b)
+{
+	return false;
+}
+#endif
+
+#define REX_W (1 << 3)
+
+/*
+ * This is a VERY crude opcode decoder. We only need to find the size of the
+ * load/store that caused our #PF and this should work for all the opcodes
+ * that we care about. Moreover, the ones who invented this instruction set
+ * should be shot.
+ */
+void kmemcheck_opcode_decode(const uint8_t *op, unsigned int *size)
+{
+	/* Default operand size */
+	int operand_size_override = 4;
+
+	/* prefixes */
+	for (; opcode_is_prefix(*op); ++op) {
+		if (*op == 0x66)
+			operand_size_override = 2;
+	}
+
+	/* REX prefix */
+	if (opcode_is_rex_prefix(*op)) {
+		uint8_t rex = *op;
+
+		++op;
+		if (rex & REX_W) {
+			switch (*op) {
+			case 0x63:
+				*size = 4;
+				return;
+			case 0x0f:
+				++op;
+
+				switch (*op) {
+				case 0xb6:
+				case 0xbe:
+					*size = 1;
+					return;
+				case 0xb7:
+				case 0xbf:
+					*size = 2;
+					return;
+				}
+
+				break;
+			}
+
+			*size = 8;
+			return;
+		}
+	}
+
+	/* escape opcode */
+	if (*op == 0x0f) {
+		++op;
+
+		/*
+		 * This is move with zero-extend and sign-extend, respectively;
+		 * we don't have to think about 0xb6/0xbe, because this is
+		 * already handled in the conditional below.
+		 */
+		if (*op == 0xb7 || *op == 0xbf)
+			operand_size_override = 2;
+	}
+
+	*size = (*op & 1) ? operand_size_override : 1;
+}
+
+const uint8_t *kmemcheck_opcode_get_primary(const uint8_t *op)
+{
+	/* skip prefixes */
+	while (opcode_is_prefix(*op))
+		++op;
+	if (opcode_is_rex_prefix(*op))
+		++op;
+	return op;
+}
diff --git a/arch/x86/mm/kmemcheck/opcode.h b/arch/x86/mm/kmemcheck/opcode.h
new file mode 100644
index 00000000000..6956aad66b5
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/opcode.h
@@ -0,0 +1,9 @@
+#ifndef ARCH__X86__MM__KMEMCHECK__OPCODE_H
+#define ARCH__X86__MM__KMEMCHECK__OPCODE_H
+
+#include <linux/types.h>
+
+void kmemcheck_opcode_decode(const uint8_t *op, unsigned int *size);
+const uint8_t *kmemcheck_opcode_get_primary(const uint8_t *op);
+
+#endif
diff --git a/arch/x86/mm/kmemcheck/pte.c b/arch/x86/mm/kmemcheck/pte.c
new file mode 100644
index 00000000000..4ead26eeaf9
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/pte.c
@@ -0,0 +1,22 @@
+#include <linux/mm.h>
+
+#include <asm/pgtable.h>
+
+#include "pte.h"
+
+pte_t *kmemcheck_pte_lookup(unsigned long address)
+{
+	pte_t *pte;
+	unsigned int level;
+
+	pte = lookup_address(address, &level);
+	if (!pte)
+		return NULL;
+	if (level != PG_LEVEL_4K)
+		return NULL;
+	if (!pte_hidden(*pte))
+		return NULL;
+
+	return pte;
+}
+
diff --git a/arch/x86/mm/kmemcheck/pte.h b/arch/x86/mm/kmemcheck/pte.h
new file mode 100644
index 00000000000..9f596645649
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/pte.h
@@ -0,0 +1,10 @@
+#ifndef ARCH__X86__MM__KMEMCHECK__PTE_H
+#define ARCH__X86__MM__KMEMCHECK__PTE_H
+
+#include <linux/mm.h>
+
+#include <asm/pgtable.h>
+
+pte_t *kmemcheck_pte_lookup(unsigned long address);
+
+#endif
diff --git a/arch/x86/mm/kmemcheck/selftest.c b/arch/x86/mm/kmemcheck/selftest.c
new file mode 100644
index 00000000000..036efbea8b2
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/selftest.c
@@ -0,0 +1,69 @@
+#include <linux/kernel.h>
+
+#include "opcode.h"
+#include "selftest.h"
+
+struct selftest_opcode {
+	unsigned int expected_size;
+	const uint8_t *insn;
+	const char *desc;
+};
+
+static const struct selftest_opcode selftest_opcodes[] = {
+	/* REP MOVS */
+	{1, "\xf3\xa4", 		"rep movsb <mem8>, <mem8>"},
+	{4, "\xf3\xa5",			"rep movsl <mem32>, <mem32>"},
+
+	/* MOVZX / MOVZXD */
+	{1, "\x66\x0f\xb6\x51\xf8",	"movzwq <mem8>, <reg16>"},
+	{1, "\x0f\xb6\x51\xf8",		"movzwq <mem8>, <reg32>"},
+
+	/* MOVSX / MOVSXD */
+	{1, "\x66\x0f\xbe\x51\xf8",	"movswq <mem8>, <reg16>"},
+	{1, "\x0f\xbe\x51\xf8",		"movswq <mem8>, <reg32>"},
+
+#ifdef CONFIG_X86_64
+	/* MOVZX / MOVZXD */
+	{1, "\x49\x0f\xb6\x51\xf8",	"movzbq <mem8>, <reg64>"},
+	{2, "\x49\x0f\xb7\x51\xf8",	"movzbq <mem16>, <reg64>"},
+
+	/* MOVSX / MOVSXD */
+	{1, "\x49\x0f\xbe\x51\xf8",	"movsbq <mem8>, <reg64>"},
+	{2, "\x49\x0f\xbf\x51\xf8",	"movsbq <mem16>, <reg64>"},
+	{4, "\x49\x63\x51\xf8",		"movslq <mem32>, <reg64>"},
+#endif
+};
+
+static bool selftest_opcode_one(const struct selftest_opcode *op)
+{
+	unsigned size;
+
+	kmemcheck_opcode_decode(op->insn, &size);
+
+	if (size == op->expected_size)
+		return true;
+
+	printk(KERN_WARNING "kmemcheck: opcode %s: expected size %d, got %d\n",
+		op->desc, op->expected_size, size);
+	return false;
+}
+
+static bool selftest_opcodes_all(void)
+{
+	bool pass = true;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(selftest_opcodes); ++i)
+		pass = pass && selftest_opcode_one(&selftest_opcodes[i]);
+
+	return pass;
+}
+
+bool kmemcheck_selftest(void)
+{
+	bool pass = true;
+
+	pass = pass && selftest_opcodes_all();
+
+	return pass;
+}
diff --git a/arch/x86/mm/kmemcheck/selftest.h b/arch/x86/mm/kmemcheck/selftest.h
new file mode 100644
index 00000000000..8fed4fe11f9
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/selftest.h
@@ -0,0 +1,6 @@
+#ifndef ARCH_X86_MM_KMEMCHECK_SELFTEST_H
+#define ARCH_X86_MM_KMEMCHECK_SELFTEST_H
+
+bool kmemcheck_selftest(void);
+
+#endif
diff --git a/arch/x86/mm/kmemcheck/shadow.c b/arch/x86/mm/kmemcheck/shadow.c
new file mode 100644
index 00000000000..e773b6bd007
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/shadow.c
@@ -0,0 +1,162 @@
+#include <linux/kmemcheck.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#include "pte.h"
+#include "shadow.h"
+
+/*
+ * Return the shadow address for the given address. Returns NULL if the
+ * address is not tracked.
+ *
+ * We need to be extremely careful not to follow any invalid pointers,
+ * because this function can be called for *any* possible address.
+ */
+void *kmemcheck_shadow_lookup(unsigned long address)
+{
+	pte_t *pte;
+	struct page *page;
+
+	if (!virt_addr_valid(address))
+		return NULL;
+
+	pte = kmemcheck_pte_lookup(address);
+	if (!pte)
+		return NULL;
+
+	page = virt_to_page(address);
+	if (!page->shadow)
+		return NULL;
+	return page->shadow + (address & (PAGE_SIZE - 1));
+}
+
+static void mark_shadow(void *address, unsigned int n,
+	enum kmemcheck_shadow status)
+{
+	unsigned long addr = (unsigned long) address;
+	unsigned long last_addr = addr + n - 1;
+	unsigned long page = addr & PAGE_MASK;
+	unsigned long last_page = last_addr & PAGE_MASK;
+	unsigned int first_n;
+	void *shadow;
+
+	/* If the memory range crosses a page boundary, stop there. */
+	if (page == last_page)
+		first_n = n;
+	else
+		first_n = page + PAGE_SIZE - addr;
+
+	shadow = kmemcheck_shadow_lookup(addr);
+	if (shadow)
+		memset(shadow, status, first_n);
+
+	addr += first_n;
+	n -= first_n;
+
+	/* Do full-page memset()s. */
+	while (n >= PAGE_SIZE) {
+		shadow = kmemcheck_shadow_lookup(addr);
+		if (shadow)
+			memset(shadow, status, PAGE_SIZE);
+
+		addr += PAGE_SIZE;
+		n -= PAGE_SIZE;
+	}
+
+	/* Do the remaining page, if any. */
+	if (n > 0) {
+		shadow = kmemcheck_shadow_lookup(addr);
+		if (shadow)
+			memset(shadow, status, n);
+	}
+}
+
+void kmemcheck_mark_unallocated(void *address, unsigned int n)
+{
+	mark_shadow(address, n, KMEMCHECK_SHADOW_UNALLOCATED);
+}
+
+void kmemcheck_mark_uninitialized(void *address, unsigned int n)
+{
+	mark_shadow(address, n, KMEMCHECK_SHADOW_UNINITIALIZED);
+}
+
+/*
+ * Fill the shadow memory of the given address such that the memory at that
+ * address is marked as being initialized.
+ */
+void kmemcheck_mark_initialized(void *address, unsigned int n)
+{
+	mark_shadow(address, n, KMEMCHECK_SHADOW_INITIALIZED);
+}
+EXPORT_SYMBOL_GPL(kmemcheck_mark_initialized);
+
+void kmemcheck_mark_freed(void *address, unsigned int n)
+{
+	mark_shadow(address, n, KMEMCHECK_SHADOW_FREED);
+}
+
+void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n)
+{
+	unsigned int i;
+
+	for (i = 0; i < n; ++i)
+		kmemcheck_mark_unallocated(page_address(&p[i]), PAGE_SIZE);
+}
+
+void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n)
+{
+	unsigned int i;
+
+	for (i = 0; i < n; ++i)
+		kmemcheck_mark_uninitialized(page_address(&p[i]), PAGE_SIZE);
+}
+
+void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n)
+{
+	unsigned int i;
+
+	for (i = 0; i < n; ++i)
+		kmemcheck_mark_initialized(page_address(&p[i]), PAGE_SIZE);
+}
+
+enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size)
+{
+	uint8_t *x;
+	unsigned int i;
+
+	x = shadow;
+
+#ifdef CONFIG_KMEMCHECK_PARTIAL_OK
+	/*
+	 * Make sure _some_ bytes are initialized. Gcc frequently generates
+	 * code to access neighboring bytes.
+	 */
+	for (i = 0; i < size; ++i) {
+		if (x[i] == KMEMCHECK_SHADOW_INITIALIZED)
+			return x[i];
+	}
+#else
+	/* All bytes must be initialized. */
+	for (i = 0; i < size; ++i) {
+		if (x[i] != KMEMCHECK_SHADOW_INITIALIZED)
+			return x[i];
+	}
+#endif
+
+	return x[0];
+}
+
+void kmemcheck_shadow_set(void *shadow, unsigned int size)
+{
+	uint8_t *x;
+	unsigned int i;
+
+	x = shadow;
+	for (i = 0; i < size; ++i)
+		x[i] = KMEMCHECK_SHADOW_INITIALIZED;
+}
diff --git a/arch/x86/mm/kmemcheck/shadow.h b/arch/x86/mm/kmemcheck/shadow.h
new file mode 100644
index 00000000000..af46d9ab9d8
--- /dev/null
+++ b/arch/x86/mm/kmemcheck/shadow.h
@@ -0,0 +1,16 @@
+#ifndef ARCH__X86__MM__KMEMCHECK__SHADOW_H
+#define ARCH__X86__MM__KMEMCHECK__SHADOW_H
+
+enum kmemcheck_shadow {
+	KMEMCHECK_SHADOW_UNALLOCATED,
+	KMEMCHECK_SHADOW_UNINITIALIZED,
+	KMEMCHECK_SHADOW_INITIALIZED,
+	KMEMCHECK_SHADOW_FREED,
+};
+
+void *kmemcheck_shadow_lookup(unsigned long address);
+
+enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size);
+void kmemcheck_shadow_set(void *shadow, unsigned int size);
+
+#endif
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 6ce9518fe2a..3cfe9ced8a4 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -470,7 +470,7 @@ static int split_large_page(pte_t *kpte, unsigned long address)
 
 	if (!debug_pagealloc)
 		spin_unlock(&cpa_lock);
-	base = alloc_pages(GFP_KERNEL, 0);
+	base = alloc_pages(GFP_KERNEL | __GFP_NOTRACK, 0);
 	if (!debug_pagealloc)
 		spin_lock(&cpa_lock);
 	if (!base)
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 7aa03a5389f..8e43bdd4545 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -4,9 +4,11 @@
 #include <asm/tlb.h>
 #include <asm/fixmap.h>
 
+#define PGALLOC_GFP GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO
+
 pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
 {
-	return (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return (pte_t *)__get_free_page(PGALLOC_GFP);
 }
 
 pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
@@ -14,9 +16,9 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
 	struct page *pte;
 
 #ifdef CONFIG_HIGHPTE
-	pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT|__GFP_ZERO, 0);
+	pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
 #else
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+	pte = alloc_pages(PGALLOC_GFP, 0);
 #endif
 	if (pte)
 		pgtable_page_ctor(pte);
@@ -161,7 +163,7 @@ static int preallocate_pmds(pmd_t *pmds[])
 	bool failed = false;
 
 	for(i = 0; i < PREALLOCATED_PMDS; i++) {
-		pmd_t *pmd = (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+		pmd_t *pmd = (pmd_t *)__get_free_page(PGALLOC_GFP);
 		if (pmd == NULL)
 			failed = true;
 		pmds[i] = pmd;
@@ -228,7 +230,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	pmd_t *pmds[PREALLOCATED_PMDS];
 	unsigned long flags;
 
-	pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	pgd = (pgd_t *)__get_free_page(PGALLOC_GFP);
 
 	if (pgd == NULL)
 		goto out;
diff --git a/arch/xtensa/include/asm/kmap_types.h b/arch/xtensa/include/asm/kmap_types.h
index 9e822d2e3bc..11c687e527f 100644
--- a/arch/xtensa/include/asm/kmap_types.h
+++ b/arch/xtensa/include/asm/kmap_types.h
@@ -1,31 +1,6 @@
-/*
- * include/asm-xtensa/kmap_types.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
 #ifndef _XTENSA_KMAP_TYPES_H
 #define _XTENSA_KMAP_TYPES_H
 
-enum km_type {
-  KM_BOUNCE_READ,
-  KM_SKB_SUNRPC_DATA,
-  KM_SKB_DATA_SOFTIRQ,
-  KM_USER0,
-  KM_USER1,
-  KM_BIO_SRC_IRQ,
-  KM_BIO_DST_IRQ,
-  KM_PTE0,
-  KM_PTE1,
-  KM_IRQ0,
-  KM_IRQ1,
-  KM_SOFTIRQ0,
-  KM_SOFTIRQ1,
-  KM_TYPE_NR
-};
+#include <asm-generic/kmap_types.h>
 
 #endif	/* _XTENSA_KMAP_TYPES_H */
diff --git a/arch/xtensa/kernel/init_task.c b/arch/xtensa/kernel/init_task.c
index e07f5c9fcd3..c4302f0e4ba 100644
--- a/arch/xtensa/kernel/init_task.c
+++ b/arch/xtensa/kernel/init_task.c
@@ -23,10 +23,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
 union thread_union init_thread_union
 	__attribute__((__section__(".data.init_task"))) =
 { INIT_THREAD_INFO(init_task) };
diff --git a/block/blk-core.c b/block/blk-core.c
index f6452f69250..b06cf5c2a82 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -26,7 +26,6 @@
 #include <linux/swap.h>
 #include <linux/writeback.h>
 #include <linux/task_io_accounting_ops.h>
-#include <linux/blktrace_api.h>
 #include <linux/fault-inject.h>
 
 #define CREATE_TRACE_POINTS
@@ -498,6 +497,11 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
 
 	q->backing_dev_info.unplug_io_fn = blk_backing_dev_unplug;
 	q->backing_dev_info.unplug_io_data = q;
+	q->backing_dev_info.ra_pages =
+			(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
+	q->backing_dev_info.state = 0;
+	q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
+
 	err = bdi_init(&q->backing_dev_info);
 	if (err) {
 		kmem_cache_free(blk_requestq_cachep, q);
diff --git a/block/blk-settings.c b/block/blk-settings.c
index d71cedc09c4..7541ea4bf9f 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -96,6 +96,31 @@ void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn)
 EXPORT_SYMBOL_GPL(blk_queue_lld_busy);
 
 /**
+ * blk_set_default_limits - reset limits to default values
+ * @limits:  the queue_limits structure to reset
+ *
+ * Description:
+ *   Returns a queue_limit struct to its default state.  Can be used by
+ *   stacking drivers like DM that stage table swaps and reuse an
+ *   existing device queue.
+ */
+void blk_set_default_limits(struct queue_limits *lim)
+{
+	lim->max_phys_segments = MAX_PHYS_SEGMENTS;
+	lim->max_hw_segments = MAX_HW_SEGMENTS;
+	lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
+	lim->max_segment_size = MAX_SEGMENT_SIZE;
+	lim->max_sectors = lim->max_hw_sectors = SAFE_MAX_SECTORS;
+	lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
+	lim->bounce_pfn = BLK_BOUNCE_ANY;
+	lim->alignment_offset = 0;
+	lim->io_opt = 0;
+	lim->misaligned = 0;
+	lim->no_cluster = 0;
+}
+EXPORT_SYMBOL(blk_set_default_limits);
+
+/**
  * blk_queue_make_request - define an alternate make_request function for a device
  * @q:  the request queue for the device to be affected
  * @mfn: the alternate make_request function
@@ -123,18 +148,8 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	 * set defaults
 	 */
 	q->nr_requests = BLKDEV_MAX_RQ;
-	blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
-	blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
-	blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
-	blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
 
 	q->make_request_fn = mfn;
-	q->backing_dev_info.ra_pages =
-			(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
-	q->backing_dev_info.state = 0;
-	q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
-	blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
-	blk_queue_logical_block_size(q, 512);
 	blk_queue_dma_alignment(q, 511);
 	blk_queue_congestion_threshold(q);
 	q->nr_batching = BLK_BATCH_REQ;
@@ -147,6 +162,8 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	q->unplug_timer.function = blk_unplug_timeout;
 	q->unplug_timer.data = (unsigned long)q;
 
+	blk_set_default_limits(&q->limits);
+
 	/*
 	 * by default assume old behaviour and bounce for any highmem page
 	 */
diff --git a/block/bsg.c b/block/bsg.c
index 5358f9ae13c..54106f052f7 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -1065,6 +1065,11 @@ EXPORT_SYMBOL_GPL(bsg_register_queue);
 
 static struct cdev bsg_cdev;
 
+static char *bsg_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "bsg/%s", dev_name(dev));
+}
+
 static int __init bsg_init(void)
 {
 	int ret, i;
@@ -1085,6 +1090,7 @@ static int __init bsg_init(void)
 		ret = PTR_ERR(bsg_class);
 		goto destroy_kmemcache;
 	}
+	bsg_class->nodename = bsg_nodename;
 
 	ret = alloc_chrdev_region(&devid, 0, BSG_MAX_DEVS, "bsg");
 	if (ret)
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index ef2f72d4243..833ec18eaa6 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -122,7 +122,6 @@ struct cfq_data {
 	struct cfq_queue *async_idle_cfqq;
 
 	sector_t last_position;
-	unsigned long last_end_request;
 
 	/*
 	 * tunables, see top of file
@@ -1253,7 +1252,7 @@ static int cfq_forced_dispatch(struct cfq_data *cfqd)
 
 	BUG_ON(cfqd->busy_queues);
 
-	cfq_log(cfqd, "forced_dispatch=%d\n", dispatched);
+	cfq_log(cfqd, "forced_dispatch=%d", dispatched);
 	return dispatched;
 }
 
@@ -2164,9 +2163,6 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 	if (cfq_cfqq_sync(cfqq))
 		cfqd->sync_flight--;
 
-	if (!cfq_class_idle(cfqq))
-		cfqd->last_end_request = now;
-
 	if (sync)
 		RQ_CIC(rq)->last_end_request = now;
 
@@ -2479,7 +2475,6 @@ static void *cfq_init_queue(struct request_queue *q)
 
 	INIT_WORK(&cfqd->unplug_work, cfq_kick_queue);
 
-	cfqd->last_end_request = jiffies;
 	cfqd->cfq_quantum = cfq_quantum;
 	cfqd->cfq_fifo_expire[0] = cfq_fifo_expire[0];
 	cfqd->cfq_fifo_expire[1] = cfq_fifo_expire[1];
diff --git a/block/genhd.c b/block/genhd.c
index fe7ccc0a618..f4c64c2b303 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -996,10 +996,20 @@ struct class block_class = {
 	.name		= "block",
 };
 
+static char *block_nodename(struct device *dev)
+{
+	struct gendisk *disk = dev_to_disk(dev);
+
+	if (disk->nodename)
+		return disk->nodename(disk);
+	return NULL;
+}
+
 static struct device_type disk_type = {
 	.name		= "disk",
 	.groups		= disk_attr_groups,
 	.release	= disk_release,
+	.nodename	= block_nodename,
 };
 
 #ifdef CONFIG_PROC_FS
diff --git a/crypto/xor.c b/crypto/xor.c
index 996b6ee57d9..fc5b836f343 100644
--- a/crypto/xor.c
+++ b/crypto/xor.c
@@ -101,7 +101,12 @@ calibrate_xor_blocks(void)
 	void *b1, *b2;
 	struct xor_block_template *f, *fastest;
 
-	b1 = (void *) __get_free_pages(GFP_KERNEL, 2);
+	/*
+	 * Note: Since the memory is not actually used for _anything_ but to
+	 * test the XOR speed, we don't really want kmemcheck to warn about
+	 * reading uninitialized bytes here.
+	 */
+	b1 = (void *) __get_free_pages(GFP_KERNEL | __GFP_NOTRACK, 2);
 	if (!b1) {
 		printk(KERN_WARNING "xor: Yikes!  No memory available.\n");
 		return -ENOMEM;
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 00cf9553f74..a442c8f29fc 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -104,6 +104,8 @@ source "drivers/auxdisplay/Kconfig"
 
 source "drivers/uio/Kconfig"
 
+source "drivers/vlynq/Kconfig"
+
 source "drivers/xen/Kconfig"
 
 source "drivers/staging/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 1266ead6ace..00b44f4ccf0 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -105,5 +105,7 @@ obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
 obj-$(CONFIG_VIRTIO)		+= virtio/
+obj-$(CONFIG_VLYNQ)		+= vlynq/
 obj-$(CONFIG_STAGING)		+= staging/
 obj-y				+= platform/
+obj-y				+= ieee802154/
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 07e20135f01..0bba148a2c6 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -139,7 +139,7 @@ acpi_status acpi_ev_initialize_op_regions(void);
 acpi_status
 acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 			       u32 function,
-			       acpi_physical_address address,
+			       u32 region_offset,
 			       u32 bit_width, acpi_integer * value);
 
 acpi_status
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 16e5210ae93..3d87362d17e 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -362,9 +362,6 @@ extern u8 acpi_gbl_method_executing;
 extern u8 acpi_gbl_abort_method;
 extern u8 acpi_gbl_db_terminate_threads;
 
-ACPI_EXTERN int optind;
-ACPI_EXTERN char *optarg;
-
 ACPI_EXTERN u8 acpi_gbl_db_opt_tables;
 ACPI_EXTERN u8 acpi_gbl_db_opt_stats;
 ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods;
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 2ec394a328e..ee986edfa0d 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -205,6 +205,7 @@ struct acpi_namespace_node {
 #define ANOBJ_METHOD_LOCAL              0x08	/* Node is a method local */
 #define ANOBJ_SUBTREE_HAS_INI           0x10	/* Used to optimize device initialization */
 #define ANOBJ_EVALUATED                 0x20	/* Set on first evaluation of node */
+#define ANOBJ_ALLOCATED_BUFFER          0x40	/* Method AML buffer is dynamic (install_method) */
 
 #define ANOBJ_IS_EXTERNAL               0x08	/* i_aSL only: This object created via External() */
 #define ANOBJ_METHOD_NO_RETVAL          0x10	/* i_aSL only: Method has no return value */
@@ -788,11 +789,14 @@ struct acpi_bit_register_info {
 /* For control registers, both ignored and reserved bits must be preserved */
 
 /*
- * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
- * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
- * as a BIOS workaround on some machines.
+ * For PM1 control, the SCI enable bit (bit 0, SCI_EN) is defined by the
+ * ACPI specification to be a "preserved" bit - "OSPM always preserves this
+ * bit position", section 4.7.3.2.1. However, on some machines the OS must
+ * write a one to this bit after resume for the machine to work properly.
+ * To enable this, we no longer attempt to preserve this bit. No machines
+ * are known to fail if the bit is not preserved. (May 2009)
  */
-#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0200	/* Bits 9 */
+#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0200	/* Bit 9 */
 #define ACPI_PM1_CONTROL_RESERVED_BITS          0xC1F8	/* Bits 14-15, 3-8 */
 #define ACPI_PM1_CONTROL_PRESERVED_BITS \
 	       (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index 46cb5b46d28..94cdc2b8cb9 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -99,10 +99,19 @@ acpi_ns_walk_namespace(acpi_object_type type,
 		       acpi_walk_callback user_function,
 		       void *context, void **return_value);
 
-struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct acpi_namespace_node
-						  *parent, struct acpi_namespace_node
+struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node
+						  *parent,
+						  struct acpi_namespace_node
 						  *child);
 
+struct acpi_namespace_node *acpi_ns_get_next_node_typed(acpi_object_type type,
+							struct
+							acpi_namespace_node
+							*parent,
+							struct
+							acpi_namespace_node
+							*child);
+
 /*
  * nsparse - table parsing
  */
diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h
index ff851c5df69..067f967eb38 100644
--- a/drivers/acpi/acpica/amlcode.h
+++ b/drivers/acpi/acpica/amlcode.h
@@ -483,7 +483,7 @@ typedef enum {
 
 #define AML_METHOD_ARG_COUNT        0x07
 #define AML_METHOD_SERIALIZED       0x08
-#define AML_METHOD_SYNCH_LEVEL      0xF0
+#define AML_METHOD_SYNC_LEVEL       0xF0
 
 /* METHOD_FLAGS_ARG_COUNT is not used internally, define additional flags */
 
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index dab3f48f0b4..02e6caad4a7 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -734,7 +734,8 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 
 			/* Local ID (0-7) is (AML opcode - base AML_LOCAL_OP) */
 
-			obj_desc->reference.value = opcode - AML_LOCAL_OP;
+			obj_desc->reference.value =
+			    ((u32)opcode) - AML_LOCAL_OP;
 			obj_desc->reference.class = ACPI_REFCLASS_LOCAL;
 
 #ifndef ACPI_NO_METHOD_EXECUTION
@@ -754,7 +755,7 @@ acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 
 			/* Arg ID (0-6) is (AML opcode - base AML_ARG_OP) */
 
-			obj_desc->reference.value = opcode - AML_ARG_OP;
+			obj_desc->reference.value = ((u32)opcode) - AML_ARG_OP;
 			obj_desc->reference.class = ACPI_REFCLASS_ARG;
 
 #ifndef ACPI_NO_METHOD_EXECUTION
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index b4c87b5053e..584d766e6f1 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -1386,14 +1386,19 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
 
 	case AML_BREAK_POINT_OP:
 
-		/* Call up to the OS service layer to handle this */
-
-		status =
-		    acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
-				   "Executed AML Breakpoint opcode");
+		/*
+		 * Set the single-step flag. This will cause the debugger (if present)
+		 * to break to the console within the AML debugger at the start of the
+		 * next AML instruction.
+		 */
+		ACPI_DEBUGGER_EXEC(acpi_gbl_cm_single_step = TRUE);
+		ACPI_DEBUGGER_EXEC(acpi_os_printf
+				   ("**break** Executed AML BreakPoint opcode\n"));
 
-		/* If and when it returns, all done. */
+		/* Call to the OSL in case OS wants a piece of the action */
 
+		status = acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
+					"Executed AML Breakpoint opcode");
 		break;
 
 	case AML_BREAK_OP:
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c
index 40f92bf7dce..e46c821cf57 100644
--- a/drivers/acpi/acpica/dswstate.c
+++ b/drivers/acpi/acpica/dswstate.c
@@ -102,7 +102,7 @@ acpi_ds_result_pop(union acpi_operand_object **object,
 	/* Return object of the top element and clean that top element result stack */
 
 	walk_state->result_count--;
-	index = walk_state->result_count % ACPI_RESULTS_FRAME_OBJ_NUM;
+	index = (u32)walk_state->result_count % ACPI_RESULTS_FRAME_OBJ_NUM;
 
 	*object = state->results.obj_desc[index];
 	if (!*object) {
@@ -186,7 +186,7 @@ acpi_ds_result_push(union acpi_operand_object * object,
 
 	/* Assign the address of object to the top free element of result stack */
 
-	index = walk_state->result_count % ACPI_RESULTS_FRAME_OBJ_NUM;
+	index = (u32)walk_state->result_count % ACPI_RESULTS_FRAME_OBJ_NUM;
 	state->results.obj_desc[index] = object;
 	walk_state->result_count++;
 
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 538d6326455..98c7f9c6265 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -275,7 +275,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
  *
  * PARAMETERS:  region_obj          - Internal region object
  *              Function            - Read or Write operation
- *              Address             - Where in the space to read or write
+ *              region_offset       - Where in the region to read or write
  *              bit_width           - Field width in bits (8, 16, 32, or 64)
  *              Value               - Pointer to in or out value, must be
  *                                    full 64-bit acpi_integer
@@ -290,7 +290,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
 acpi_status
 acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 			       u32 function,
-			       acpi_physical_address address,
+			       u32 region_offset,
 			       u32 bit_width, acpi_integer * value)
 {
 	acpi_status status;
@@ -396,7 +396,8 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 			  "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
 			  &region_obj->region.handler->address_space, handler,
-			  ACPI_FORMAT_NATIVE_UINT(address),
+			  ACPI_FORMAT_NATIVE_UINT(region_obj->region.address +
+						  region_offset),
 			  acpi_ut_get_region_name(region_obj->region.
 						  space_id)));
 
@@ -412,8 +413,9 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 
 	/* Call the handler */
 
-	status = handler(function, address, bit_width, value,
-			 handler_desc->address_space.context,
+	status = handler(function,
+			 (region_obj->region.address + region_offset),
+			 bit_width, value, handler_desc->address_space.context,
 			 region_obj2->extra.region_context);
 
 	if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index d0a080747ec..4721f58fe42 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -51,7 +51,7 @@
 ACPI_MODULE_NAME("evxfevnt")
 
 /* Local prototypes */
-acpi_status
+static acpi_status
 acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 		       struct acpi_gpe_block_info *gpe_block, void *context);
 
@@ -785,7 +785,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_gpe_device)
  *              block device. NULL if the GPE is one of the FADT-defined GPEs.
  *
  ******************************************************************************/
-acpi_status
+static acpi_status
 acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 		       struct acpi_gpe_block_info *gpe_block, void *context)
 {
diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c
index 3deb20a126b..277fd609611 100644
--- a/drivers/acpi/acpica/exconfig.c
+++ b/drivers/acpi/acpica/exconfig.c
@@ -47,6 +47,7 @@
 #include "acnamesp.h"
 #include "actables.h"
 #include "acdispat.h"
+#include "acevents.h"
 
 #define _COMPONENT          ACPI_EXECUTER
 ACPI_MODULE_NAME("exconfig")
@@ -57,6 +58,10 @@ acpi_ex_add_table(u32 table_index,
 		  struct acpi_namespace_node *parent_node,
 		  union acpi_operand_object **ddb_handle);
 
+static acpi_status
+acpi_ex_region_read(union acpi_operand_object *obj_desc,
+		    u32 length, u8 *buffer);
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ex_add_table
@@ -91,6 +96,7 @@ acpi_ex_add_table(u32 table_index,
 
 	/* Init the table handle */
 
+	obj_desc->common.flags |= AOPOBJ_DATA_VALID;
 	obj_desc->reference.class = ACPI_REFCLASS_TABLE;
 	*ddb_handle = obj_desc;
 
@@ -229,6 +235,8 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state,
 				       walk_state);
 		if (ACPI_FAILURE(status)) {
 			(void)acpi_ex_unload_table(ddb_handle);
+
+			acpi_ut_remove_reference(ddb_handle);
 			return_ACPI_STATUS(status);
 		}
 	}
@@ -254,6 +262,47 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state,
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_ex_region_read
+ *
+ * PARAMETERS:  obj_desc        - Region descriptor
+ *              Length          - Number of bytes to read
+ *              Buffer          - Pointer to where to put the data
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read data from an operation region. The read starts from the
+ *              beginning of the region.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ex_region_read(union acpi_operand_object *obj_desc, u32 length, u8 *buffer)
+{
+	acpi_status status;
+	acpi_integer value;
+	u32 region_offset = 0;
+	u32 i;
+
+	/* Bytewise reads */
+
+	for (i = 0; i < length; i++) {
+		status = acpi_ev_address_space_dispatch(obj_desc, ACPI_READ,
+							region_offset, 8,
+							&value);
+		if (ACPI_FAILURE(status)) {
+			return status;
+		}
+
+		*buffer = (u8)value;
+		buffer++;
+		region_offset++;
+	}
+
+	return AE_OK;
+}
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_ex_load_op
  *
  * PARAMETERS:  obj_desc        - Region or Buffer/Field where the table will be
@@ -314,18 +363,23 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 			}
 		}
 
-		/*
-		 * Map the table header and get the actual table length. The region
-		 * length is not guaranteed to be the same as the table length.
-		 */
-		table = acpi_os_map_memory(obj_desc->region.address,
-					   sizeof(struct acpi_table_header));
+		/* Get the table header first so we can get the table length */
+
+		table = ACPI_ALLOCATE(sizeof(struct acpi_table_header));
 		if (!table) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 
+		status =
+		    acpi_ex_region_read(obj_desc,
+					sizeof(struct acpi_table_header),
+					ACPI_CAST_PTR(u8, table));
 		length = table->length;
-		acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
+		ACPI_FREE(table);
+
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
 
 		/* Must have at least an ACPI table header */
 
@@ -334,10 +388,19 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 		}
 
 		/*
-		 * The memory region is not guaranteed to remain stable and we must
-		 * copy the table to a local buffer. For example, the memory region
-		 * is corrupted after suspend on some machines. Dynamically loaded
-		 * tables are usually small, so this overhead is minimal.
+		 * The original implementation simply mapped the table, with no copy.
+		 * However, the memory region is not guaranteed to remain stable and
+		 * we must copy the table to a local buffer. For example, the memory
+		 * region is corrupted after suspend on some machines. Dynamically
+		 * loaded tables are usually small, so this overhead is minimal.
+		 *
+		 * The latest implementation (5/2009) does not use a mapping at all.
+		 * We use the low-level operation region interface to read the table
+		 * instead of the obvious optimization of using a direct mapping.
+		 * This maintains a consistent use of operation regions across the
+		 * entire subsystem. This is important if additional processing must
+		 * be performed in the (possibly user-installed) operation region
+		 * handler. For example, acpi_exec and ASLTS depend on this.
 		 */
 
 		/* Allocate a buffer for the table */
@@ -347,17 +410,16 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 
-		/* Map the entire table and copy it */
+		/* Read the entire table */
 
-		table = acpi_os_map_memory(obj_desc->region.address, length);
-		if (!table) {
+		status = acpi_ex_region_read(obj_desc, length,
+					     ACPI_CAST_PTR(u8,
+							   table_desc.pointer));
+		if (ACPI_FAILURE(status)) {
 			ACPI_FREE(table_desc.pointer);
-			return_ACPI_STATUS(AE_NO_MEMORY);
+			return_ACPI_STATUS(status);
 		}
 
-		ACPI_MEMCPY(table_desc.pointer, table, length);
-		acpi_os_unmap_memory(table, length);
-
 		table_desc.address = obj_desc->region.address;
 		break;
 
@@ -454,6 +516,10 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc,
 		return_ACPI_STATUS(status);
 	}
 
+	/* Remove the reference by added by acpi_ex_store above */
+
+	acpi_ut_remove_reference(ddb_handle);
+
 	/* Invoke table handler if present */
 
 	if (acpi_gbl_table_handler) {
@@ -495,13 +561,18 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 
 	/*
 	 * Validate the handle
-	 * Although the handle is partially validated in acpi_ex_reconfiguration(),
+	 * Although the handle is partially validated in acpi_ex_reconfiguration()
 	 * when it calls acpi_ex_resolve_operands(), the handle is more completely
 	 * validated here.
+	 *
+	 * Handle must be a valid operand object of type reference. Also, the
+	 * ddb_handle must still be marked valid (table has not been previously
+	 * unloaded)
 	 */
 	if ((!ddb_handle) ||
 	    (ACPI_GET_DESCRIPTOR_TYPE(ddb_handle) != ACPI_DESC_TYPE_OPERAND) ||
-	    (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE)) {
+	    (ddb_handle->common.type != ACPI_TYPE_LOCAL_REFERENCE) ||
+	    (!(ddb_handle->common.flags & AOPOBJ_DATA_VALID))) {
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
@@ -509,6 +580,12 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 
 	table_index = table_desc->reference.value;
 
+	/* Ensure the table is still loaded */
+
+	if (!acpi_tb_is_table_loaded(table_index)) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
 	/* Invoke table handler if present */
 
 	if (acpi_gbl_table_handler) {
@@ -530,8 +607,10 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 	(void)acpi_tb_release_owner_id(table_index);
 	acpi_tb_set_table_loaded_flag(table_index, FALSE);
 
-	/* Table unloaded, remove a reference to the ddb_handle object */
-
-	acpi_ut_remove_reference(ddb_handle);
+	/*
+	 * Invalidate the handle. We do this because the handle may be stored
+	 * in a named object and may not be actually deleted until much later.
+	 */
+	ddb_handle->common.flags &= ~AOPOBJ_DATA_VALID;
 	return_ACPI_STATUS(AE_OK);
 }
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index a57ad2564ab..02b25d233d9 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -502,7 +502,7 @@ acpi_ex_create_method(u8 * aml_start,
 		 * ACPI 2.0: sync_level = sync_level in method declaration
 		 */
 		obj_desc->method.sync_level = (u8)
-		    ((method_flags & AML_METHOD_SYNCH_LEVEL) >> 4);
+		    ((method_flags & AML_METHOD_SYNC_LEVEL) >> 4);
 	}
 
 	/* Attach the new object to the method Node */
diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c
index 89d141fdae0..ec524614e70 100644
--- a/drivers/acpi/acpica/exdump.c
+++ b/drivers/acpi/acpica/exdump.c
@@ -120,9 +120,11 @@ static struct acpi_exdump_info acpi_ex_dump_event[2] = {
 	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(event.os_semaphore), "OsSemaphore"}
 };
 
-static struct acpi_exdump_info acpi_ex_dump_method[8] = {
+static struct acpi_exdump_info acpi_ex_dump_method[9] = {
 	{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_method), NULL},
-	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.param_count), "ParamCount"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.method_flags), "Method Flags"},
+	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.param_count),
+	 "Parameter Count"},
 	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.sync_level), "Sync Level"},
 	{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(method.mutex), "Mutex"},
 	{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.owner_id), "Owner Id"},
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index 99cee61e655..d4075b82102 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -222,7 +222,7 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
 {
 	acpi_status status;
 	union acpi_operand_object *rgn_desc;
-	acpi_physical_address address;
+	u32 region_offset;
 
 	ACPI_FUNCTION_TRACE(ex_access_region);
 
@@ -243,7 +243,7 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
 	 * 3) The current offset into the field
 	 */
 	rgn_desc = obj_desc->common_field.region_obj;
-	address = rgn_desc->region.address +
+	region_offset =
 	    obj_desc->common_field.base_byte_offset + field_datum_byte_offset;
 
 	if ((function & ACPI_IO_MASK) == ACPI_READ) {
@@ -260,16 +260,18 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
 			      obj_desc->common_field.access_byte_width,
 			      obj_desc->common_field.base_byte_offset,
 			      field_datum_byte_offset, ACPI_CAST_PTR(void,
-								     address)));
+								     (rgn_desc->
+								      region.
+								      address +
+								      region_offset))));
 
 	/* Invoke the appropriate address_space/op_region handler */
 
-	status = acpi_ev_address_space_dispatch(rgn_desc, function,
-						address,
-						ACPI_MUL_8(obj_desc->
-							   common_field.
-							   access_byte_width),
-						value);
+	status =
+	    acpi_ev_address_space_dispatch(rgn_desc, function, region_offset,
+					   ACPI_MUL_8(obj_desc->common_field.
+						      access_byte_width),
+					   value);
 
 	if (ACPI_FAILURE(status)) {
 		if (status == AE_NOT_IMPLEMENTED) {
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index d301c1f363e..2f0114202b0 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -83,6 +83,15 @@ void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc)
 
 	if (obj_desc->mutex.prev) {
 		(obj_desc->mutex.prev)->mutex.next = obj_desc->mutex.next;
+
+		/*
+		 * Migrate the previous sync level associated with this mutex to the
+		 * previous mutex on the list so that it may be preserved. This handles
+		 * the case where several mutexes have been acquired at the same level,
+		 * but are not released in opposite order.
+		 */
+		(obj_desc->mutex.prev)->mutex.original_sync_level =
+		    obj_desc->mutex.original_sync_level;
 	} else {
 		thread->acquired_mutex_list = obj_desc->mutex.next;
 	}
@@ -349,6 +358,7 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 		      struct acpi_walk_state *walk_state)
 {
 	acpi_status status = AE_OK;
+	u8 previous_sync_level;
 
 	ACPI_FUNCTION_TRACE(ex_release_mutex);
 
@@ -373,11 +383,12 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 	     walk_state->thread->thread_id)
 	    && (obj_desc != acpi_gbl_global_lock_mutex)) {
 		ACPI_ERROR((AE_INFO,
-			    "Thread %lX cannot release Mutex [%4.4s] acquired by thread %lX",
-			    (unsigned long)walk_state->thread->thread_id,
+			    "Thread %p cannot release Mutex [%4.4s] acquired by thread %p",
+			    ACPI_CAST_PTR(void, walk_state->thread->thread_id),
 			    acpi_ut_get_node_name(obj_desc->mutex.node),
-			    (unsigned long)obj_desc->mutex.owner_thread->
-			    thread_id));
+			    ACPI_CAST_PTR(void,
+					  obj_desc->mutex.owner_thread->
+					  thread_id)));
 		return_ACPI_STATUS(AE_AML_NOT_OWNER);
 	}
 
@@ -391,10 +402,14 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 	}
 
 	/*
-	 * The sync level of the mutex must be less than or equal to the current
-	 * sync level
+	 * The sync level of the mutex must be equal to the current sync level. In
+	 * other words, the current level means that at least one mutex at that
+	 * level is currently being held. Attempting to release a mutex of a
+	 * different level can only mean that the mutex ordering rule is being
+	 * violated. This behavior is clarified in ACPI 4.0 specification.
 	 */
-	if (obj_desc->mutex.sync_level > walk_state->thread->current_sync_level) {
+	if (obj_desc->mutex.sync_level !=
+	    walk_state->thread->current_sync_level) {
 		ACPI_ERROR((AE_INFO,
 			    "Cannot release Mutex [%4.4s], SyncLevel mismatch: mutex %d current %d",
 			    acpi_ut_get_node_name(obj_desc->mutex.node),
@@ -403,14 +418,24 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
 		return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
 	}
 
+	/*
+	 * Get the previous sync_level from the head of the acquired mutex list.
+	 * This handles the case where several mutexes at the same level have been
+	 * acquired, but are not released in reverse order.
+	 */
+	previous_sync_level =
+	    walk_state->thread->acquired_mutex_list->mutex.original_sync_level;
+
 	status = acpi_ex_release_mutex_object(obj_desc);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
 
 	if (obj_desc->mutex.acquisition_depth == 0) {
 
-		/* Restore the original sync_level */
+		/* Restore the previous sync_level */
 
-		walk_state->thread->current_sync_level =
-		    obj_desc->mutex.original_sync_level;
+		walk_state->thread->current_sync_level = previous_sync_level;
 	}
 	return_ACPI_STATUS(status);
 }
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index 90d606196c9..6efd07a4f77 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -193,10 +193,12 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
 
 		case ACPI_REFCLASS_TABLE:
 
+			/* Case for ddb_handle */
+
 			ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
 					      "Table Index 0x%X\n",
 					      source_desc->reference.value));
-			break;
+			return;
 
 		default:
 			break;
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 7b2fb602b5c..23d5505cb1f 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -81,9 +81,9 @@ acpi_status acpi_hw_clear_acpi_status(void)
 
 	ACPI_FUNCTION_TRACE(hw_clear_acpi_status);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %0llX\n",
+	ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %8.8X%8.8X\n",
 			  ACPI_BITMASK_ALL_FIXED_STATUS,
-			  acpi_gbl_xpm1a_status.address));
+			  ACPI_FORMAT_UINT64(acpi_gbl_xpm1a_status.address)));
 
 	lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
 
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index aceb9311196..efc971ab7d6 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -334,9 +334,7 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node)
 
 		/* Get the next node in this scope (NULL if none) */
 
-		child_node =
-		    acpi_ns_get_next_node(ACPI_TYPE_ANY, parent_node,
-					  child_node);
+		child_node = acpi_ns_get_next_node(parent_node, child_node);
 		if (child_node) {
 
 			/* Found a child node - detach any attached object */
@@ -345,8 +343,7 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node)
 
 			/* Check if this node has any children */
 
-			if (acpi_ns_get_next_node
-			    (ACPI_TYPE_ANY, child_node, NULL)) {
+			if (child_node->child) {
 				/*
 				 * There is at least one child of this node,
 				 * visit the node
@@ -432,9 +429,7 @@ void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 		 * Get the next child of this parent node. When child_node is NULL,
 		 * the first child of the parent is returned
 		 */
-		child_node =
-		    acpi_ns_get_next_node(ACPI_TYPE_ANY, parent_node,
-					  child_node);
+		child_node = acpi_ns_get_next_node(parent_node, child_node);
 
 		if (deletion_node) {
 			acpi_ns_delete_children(deletion_node);
@@ -452,8 +447,7 @@ void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 
 			/* Check if this node has any children */
 
-			if (acpi_ns_get_next_node
-			    (ACPI_TYPE_ANY, child_node, NULL)) {
+			if (child_node->child) {
 				/*
 				 * There is at least one child of this node,
 				 * visit the node
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index ae3dc10a7e8..af8e6bcee07 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -149,7 +149,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	name_buffer = ACPI_ALLOCATE_ZEROED(size);
 	if (!name_buffer) {
-		ACPI_ERROR((AE_INFO, "Allocation failure"));
+		ACPI_ERROR((AE_INFO, "Could not allocate %u bytes", (u32)size));
 		return_PTR(NULL);
 	}
 
diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c
index 3eb20bfda9d..60f3af08d28 100644
--- a/drivers/acpi/acpica/nsobject.c
+++ b/drivers/acpi/acpica/nsobject.c
@@ -213,6 +213,15 @@ void acpi_ns_detach_object(struct acpi_namespace_node *node)
 		return_VOID;
 	}
 
+	if (node->flags & ANOBJ_ALLOCATED_BUFFER) {
+
+		/* Free the dynamic aml buffer */
+
+		if (obj_desc->common.type == ACPI_TYPE_METHOD) {
+			ACPI_FREE(obj_desc->method.aml_start);
+		}
+	}
+
 	/* Clear the entry in all cases */
 
 	node->object = NULL;
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c
index d9e8cbc6e67..7f8e066b12a 100644
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@@ -144,7 +144,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
 
 	pathname = acpi_ns_get_external_pathname(node);
 	if (!pathname) {
-		pathname = ACPI_CAST_PTR(char, predefined->info.name);
+		return AE_OK;	/* Could not get pathname, ignore */
 	}
 
 	/*
@@ -230,10 +230,7 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
 	}
 
       exit:
-	if (pathname != predefined->info.name) {
-		ACPI_FREE(pathname);
-	}
-
+	ACPI_FREE(pathname);
 	return (status);
 }
 
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index f9b4f51bf8f..7e865639a92 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -45,6 +45,10 @@
 #include "accommon.h"
 #include "acnamesp.h"
 
+#ifdef ACPI_ASL_COMPILER
+#include "amlcode.h"
+#endif
+
 #define _COMPONENT          ACPI_NAMESPACE
 ACPI_MODULE_NAME("nssearch")
 
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 83e3aa6d4b9..35539df5c75 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -52,8 +52,7 @@ ACPI_MODULE_NAME("nswalk")
  *
  * FUNCTION:    acpi_ns_get_next_node
  *
- * PARAMETERS:  Type                - Type of node to be searched for
- *              parent_node         - Parent node whose children we are
+ * PARAMETERS:  parent_node         - Parent node whose children we are
  *                                    getting
  *              child_node          - Previous child that was found.
  *                                    The NEXT child will be returned
@@ -66,27 +65,68 @@ ACPI_MODULE_NAME("nswalk")
  *              within Scope is returned.
  *
  ******************************************************************************/
-struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct acpi_namespace_node
-						  *parent_node, struct acpi_namespace_node
+struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node
+						  *parent_node,
+						  struct acpi_namespace_node
 						  *child_node)
 {
-	struct acpi_namespace_node *next_node = NULL;
-
 	ACPI_FUNCTION_ENTRY();
 
 	if (!child_node) {
 
 		/* It's really the parent's _scope_ that we want */
 
-		next_node = parent_node->child;
+		return parent_node->child;
 	}
 
-	else {
-		/* Start search at the NEXT node */
-
-		next_node = acpi_ns_get_next_valid_node(child_node);
+	/*
+	 * Get the next node.
+	 *
+	 * If we are at the end of this peer list, return NULL
+	 */
+	if (child_node->flags & ANOBJ_END_OF_PEER_LIST) {
+		return NULL;
 	}
 
+	/* Otherwise just return the next peer */
+
+	return child_node->peer;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ns_get_next_node_typed
+ *
+ * PARAMETERS:  Type                - Type of node to be searched for
+ *              parent_node         - Parent node whose children we are
+ *                                    getting
+ *              child_node          - Previous child that was found.
+ *                                    The NEXT child will be returned
+ *
+ * RETURN:      struct acpi_namespace_node - Pointer to the NEXT child or NULL if
+ *                                    none is found.
+ *
+ * DESCRIPTION: Return the next peer node within the namespace.  If Handle
+ *              is valid, Scope is ignored.  Otherwise, the first node
+ *              within Scope is returned.
+ *
+ ******************************************************************************/
+
+struct acpi_namespace_node *acpi_ns_get_next_node_typed(acpi_object_type type,
+							struct
+							acpi_namespace_node
+							*parent_node,
+							struct
+							acpi_namespace_node
+							*child_node)
+{
+	struct acpi_namespace_node *next_node = NULL;
+
+	ACPI_FUNCTION_ENTRY();
+
+	next_node = acpi_ns_get_next_node(parent_node, child_node);
+
+
 	/* If any type is OK, we are done */
 
 	if (type == ACPI_TYPE_ANY) {
@@ -186,9 +226,7 @@ acpi_ns_walk_namespace(acpi_object_type type,
 		/* Get the next node in this scope.  Null if not found */
 
 		status = AE_OK;
-		child_node =
-		    acpi_ns_get_next_node(ACPI_TYPE_ANY, parent_node,
-					  child_node);
+		child_node = acpi_ns_get_next_node(parent_node, child_node);
 		if (child_node) {
 
 			/* Found next child, get the type if we are not searching for ANY */
@@ -269,8 +307,7 @@ acpi_ns_walk_namespace(acpi_object_type type,
 			 * function has specified that the maximum depth has been reached.
 			 */
 			if ((level < max_depth) && (status != AE_CTRL_DEPTH)) {
-				if (acpi_ns_get_next_node
-				    (ACPI_TYPE_ANY, child_node, NULL)) {
+				if (child_node->child) {
 
 					/* There is at least one child of this node, visit it */
 
diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c
index 9589fea2499..f23593d6add 100644
--- a/drivers/acpi/acpica/nsxfname.c
+++ b/drivers/acpi/acpica/nsxfname.c
@@ -45,6 +45,8 @@
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
+#include "acparser.h"
+#include "amlcode.h"
 
 #define _COMPONENT          ACPI_NAMESPACE
 ACPI_MODULE_NAME("nsxfname")
@@ -358,3 +360,151 @@ acpi_get_object_info(acpi_handle handle, struct acpi_buffer * buffer)
 }
 
 ACPI_EXPORT_SYMBOL(acpi_get_object_info)
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_install_method
+ *
+ * PARAMETERS:  Buffer         - An ACPI table containing one control method
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Install a control method into the namespace. If the method
+ *              name already exists in the namespace, it is overwritten. The
+ *              input buffer must contain a valid DSDT or SSDT containing a
+ *              single control method.
+ *
+ ******************************************************************************/
+acpi_status acpi_install_method(u8 *buffer)
+{
+	struct acpi_table_header *table =
+	    ACPI_CAST_PTR(struct acpi_table_header, buffer);
+	u8 *aml_buffer;
+	u8 *aml_start;
+	char *path;
+	struct acpi_namespace_node *node;
+	union acpi_operand_object *method_obj;
+	struct acpi_parse_state parser_state;
+	u32 aml_length;
+	u16 opcode;
+	u8 method_flags;
+	acpi_status status;
+
+	/* Parameter validation */
+
+	if (!buffer) {
+		return AE_BAD_PARAMETER;
+	}
+
+	/* Table must be a DSDT or SSDT */
+
+	if (!ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) &&
+	    !ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) {
+		return AE_BAD_HEADER;
+	}
+
+	/* First AML opcode in the table must be a control method */
+
+	parser_state.aml = buffer + sizeof(struct acpi_table_header);
+	opcode = acpi_ps_peek_opcode(&parser_state);
+	if (opcode != AML_METHOD_OP) {
+		return AE_BAD_PARAMETER;
+	}
+
+	/* Extract method information from the raw AML */
+
+	parser_state.aml += acpi_ps_get_opcode_size(opcode);
+	parser_state.pkg_end = acpi_ps_get_next_package_end(&parser_state);
+	path = acpi_ps_get_next_namestring(&parser_state);
+	method_flags = *parser_state.aml++;
+	aml_start = parser_state.aml;
+	aml_length = ACPI_PTR_DIFF(parser_state.pkg_end, aml_start);
+
+	/*
+	 * Allocate resources up-front. We don't want to have to delete a new
+	 * node from the namespace if we cannot allocate memory.
+	 */
+	aml_buffer = ACPI_ALLOCATE(aml_length);
+	if (!aml_buffer) {
+		return AE_NO_MEMORY;
+	}
+
+	method_obj = acpi_ut_create_internal_object(ACPI_TYPE_METHOD);
+	if (!method_obj) {
+		ACPI_FREE(aml_buffer);
+		return AE_NO_MEMORY;
+	}
+
+	/* Lock namespace for acpi_ns_lookup, we may be creating a new node */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		goto error_exit;
+	}
+
+	/* The lookup either returns an existing node or creates a new one */
+
+	status =
+	    acpi_ns_lookup(NULL, path, ACPI_TYPE_METHOD, ACPI_IMODE_LOAD_PASS1,
+			   ACPI_NS_DONT_OPEN_SCOPE | ACPI_NS_ERROR_IF_FOUND,
+			   NULL, &node);
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+
+	if (ACPI_FAILURE(status)) {	/* ns_lookup */
+		if (status != AE_ALREADY_EXISTS) {
+			goto error_exit;
+		}
+
+		/* Node existed previously, make sure it is a method node */
+
+		if (node->type != ACPI_TYPE_METHOD) {
+			status = AE_TYPE;
+			goto error_exit;
+		}
+	}
+
+	/* Copy the method AML to the local buffer */
+
+	ACPI_MEMCPY(aml_buffer, aml_start, aml_length);
+
+	/* Initialize the method object with the new method's information */
+
+	method_obj->method.aml_start = aml_buffer;
+	method_obj->method.aml_length = aml_length;
+
+	method_obj->method.param_count = (u8)
+	    (method_flags & AML_METHOD_ARG_COUNT);
+
+	method_obj->method.method_flags = (u8)
+	    (method_flags & ~AML_METHOD_ARG_COUNT);
+
+	if (method_flags & AML_METHOD_SERIALIZED) {
+		method_obj->method.sync_level = (u8)
+		    ((method_flags & AML_METHOD_SYNC_LEVEL) >> 4);
+	}
+
+	/*
+	 * Now that it is complete, we can attach the new method object to
+	 * the method Node (detaches/deletes any existing object)
+	 */
+	status = acpi_ns_attach_object(node, method_obj, ACPI_TYPE_METHOD);
+
+	/*
+	 * Flag indicates AML buffer is dynamic, must be deleted later.
+	 * Must be set only after attach above.
+	 */
+	node->flags |= ANOBJ_ALLOCATED_BUFFER;
+
+	/* Remove local reference to the method object */
+
+	acpi_ut_remove_reference(method_obj);
+	return status;
+
+error_exit:
+
+	ACPI_FREE(aml_buffer);
+	ACPI_FREE(method_obj);
+	return status;
+}
+ACPI_EXPORT_SYMBOL(acpi_install_method)
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index 1c7efc15225..4071bad4458 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -162,6 +162,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_type)
 acpi_status acpi_get_parent(acpi_handle handle, acpi_handle * ret_handle)
 {
 	struct acpi_namespace_node *node;
+	struct acpi_namespace_node *parent_node;
 	acpi_status status;
 
 	if (!ret_handle) {
@@ -189,12 +190,12 @@ acpi_status acpi_get_parent(acpi_handle handle, acpi_handle * ret_handle)
 
 	/* Get the parent entry */
 
-	*ret_handle =
-	    acpi_ns_convert_entry_to_handle(acpi_ns_get_parent_node(node));
+	parent_node = acpi_ns_get_parent_node(node);
+	*ret_handle = acpi_ns_convert_entry_to_handle(parent_node);
 
 	/* Return exception if parent is null */
 
-	if (!acpi_ns_get_parent_node(node)) {
+	if (!parent_node) {
 		status = AE_NULL_ENTRY;
 	}
 
@@ -268,7 +269,7 @@ acpi_get_next_object(acpi_object_type type,
 
 	/* Internal function does the real work */
 
-	node = acpi_ns_get_next_node(type, parent_node, child_node);
+	node = acpi_ns_get_next_node_typed(type, parent_node, child_node);
 	if (!node) {
 		status = AE_NOT_FOUND;
 		goto unlock_and_exit;
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index 88b5a2c4814..3c4dcc3d106 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -547,7 +547,7 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 
 		if (!package_element ||
 		    (package_element->common.type != ACPI_TYPE_PACKAGE)) {
-			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 
 		/*
@@ -593,9 +593,6 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 			} else {
 				temp_size_needed +=
 				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
-				if (!temp_size_needed) {
-					return_ACPI_STATUS(AE_BAD_PARAMETER);
-				}
 			}
 		} else {
 			/*
diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c
index 69a2aa5b5d8..395212bcd19 100644
--- a/drivers/acpi/acpica/rsxface.c
+++ b/drivers/acpi/acpica/rsxface.c
@@ -338,13 +338,17 @@ acpi_resource_to_address64(struct acpi_resource *resource,
 	switch (resource->type) {
 	case ACPI_RESOURCE_TYPE_ADDRESS16:
 
-		address16 = (struct acpi_resource_address16 *)&resource->data;
+		address16 =
+		    ACPI_CAST_PTR(struct acpi_resource_address16,
+				  &resource->data);
 		ACPI_COPY_ADDRESS(out, address16);
 		break;
 
 	case ACPI_RESOURCE_TYPE_ADDRESS32:
 
-		address32 = (struct acpi_resource_address32 *)&resource->data;
+		address32 =
+		    ACPI_CAST_PTR(struct acpi_resource_address32,
+				  &resource->data);
 		ACPI_COPY_ADDRESS(out, address32);
 		break;
 
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index 71e655d14cb..82b02dcb942 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -284,9 +284,9 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
 	if (length > sizeof(struct acpi_table_fadt)) {
 		ACPI_WARNING((AE_INFO,
 			      "FADT (revision %u) is longer than ACPI 2.0 version, "
-			      "truncating length 0x%X to 0x%zX",
-			      table->revision, (unsigned)length,
-			      sizeof(struct acpi_table_fadt)));
+			      "truncating length 0x%X to 0x%X",
+			      table->revision, length,
+			      (u32)sizeof(struct acpi_table_fadt)));
 	}
 
 	/* Clear the entire local FADT */
@@ -441,7 +441,7 @@ static void acpi_tb_convert_fadt(void)
 								   &acpi_gbl_FADT,
 								   fadt_info_table
 								   [i].length),
-						     address32);
+						     (u64) address32);
 		}
 	}
 }
@@ -469,7 +469,6 @@ static void acpi_tb_convert_fadt(void)
 static void acpi_tb_validate_fadt(void)
 {
 	char *name;
-	u32 *address32;
 	struct acpi_generic_address *address64;
 	u8 length;
 	u32 i;
@@ -505,15 +504,12 @@ static void acpi_tb_validate_fadt(void)
 
 	for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
 		/*
-		 * Generate pointers to the 32-bit and 64-bit addresses, get the
-		 * register length (width), and the register name
+		 * Generate pointer to the 64-bit address, get the register
+		 * length (width) and the register name
 		 */
 		address64 = ACPI_ADD_PTR(struct acpi_generic_address,
 					 &acpi_gbl_FADT,
 					 fadt_info_table[i].address64);
-		address32 =
-		    ACPI_ADD_PTR(u32, &acpi_gbl_FADT,
-				 fadt_info_table[i].address32);
 		length =
 		    *ACPI_ADD_PTR(u8, &acpi_gbl_FADT,
 				  fadt_info_table[i].length);
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index f865d5a096d..63e82329a9e 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -472,7 +472,7 @@ acpi_status acpi_tb_delete_namespace_by_owner(u32 table_index)
 	 * lock may block, and also since the execution of a namespace walk
 	 * must be allowed to use the interpreter.
 	 */
-	acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
+	(void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
 	status = acpi_ut_acquire_write_lock(&acpi_gbl_namespace_rw_lock);
 
 	acpi_ns_delete_namespace_by_owner(owner_id);
diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c
index 919624f123d..0f0c64bf8ac 100644
--- a/drivers/acpi/acpica/utcopy.c
+++ b/drivers/acpi/acpica/utcopy.c
@@ -676,6 +676,7 @@ acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
 {
 	u16 reference_count;
 	union acpi_operand_object *next_object;
+	acpi_status status;
 
 	/* Save fields from destination that we don't want to overwrite */
 
@@ -768,6 +769,28 @@ acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
 		}
 		break;
 
+		/*
+		 * For Mutex and Event objects, we cannot simply copy the underlying
+		 * OS object. We must create a new one.
+		 */
+	case ACPI_TYPE_MUTEX:
+
+		status = acpi_os_create_mutex(&dest_desc->mutex.os_mutex);
+		if (ACPI_FAILURE(status)) {
+			return status;
+		}
+		break;
+
+	case ACPI_TYPE_EVENT:
+
+		status = acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0,
+						  &dest_desc->event.
+						  os_semaphore);
+		if (ACPI_FAILURE(status)) {
+			return status;
+		}
+		break;
+
 	default:
 		/* Nothing to do for other simple objects */
 		break;
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index 38821f53042..527d729f681 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -179,9 +179,9 @@ acpi_debug_print(u32 requested_debug_level,
 	if (thread_id != acpi_gbl_prev_thread_id) {
 		if (ACPI_LV_THREADS & acpi_dbg_level) {
 			acpi_os_printf
-			    ("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
-			     (unsigned long)acpi_gbl_prev_thread_id,
-			     (unsigned long)thread_id);
+			    ("\n**** Context Switch from TID %p to TID %p ****\n\n",
+			     ACPI_CAST_PTR(void, acpi_gbl_prev_thread_id),
+			     ACPI_CAST_PTR(void, thread_id));
 		}
 
 		acpi_gbl_prev_thread_id = thread_id;
@@ -194,7 +194,7 @@ acpi_debug_print(u32 requested_debug_level,
 	acpi_os_printf("%8s-%04ld ", module_name, line_number);
 
 	if (ACPI_LV_THREADS & acpi_dbg_level) {
-		acpi_os_printf("[%04lX] ", (unsigned long)thread_id);
+		acpi_os_printf("[%p] ", ACPI_CAST_PTR(void, thread_id));
 	}
 
 	acpi_os_printf("[%02ld] %-22.22s: ",
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index a5ee23bc4f5..bc171031508 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -75,6 +75,7 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 	union acpi_operand_object *handler_desc;
 	union acpi_operand_object *second_desc;
 	union acpi_operand_object *next_desc;
+	union acpi_operand_object **last_obj_ptr;
 
 	ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
 
@@ -223,6 +224,26 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 			 */
 			handler_desc = object->region.handler;
 			if (handler_desc) {
+				next_desc =
+				    handler_desc->address_space.region_list;
+				last_obj_ptr =
+				    &handler_desc->address_space.region_list;
+
+				/* Remove the region object from the handler's list */
+
+				while (next_desc) {
+					if (next_desc == object) {
+						*last_obj_ptr =
+						    next_desc->region.next;
+						break;
+					}
+
+					/* Walk the linked list of handler */
+
+					last_obj_ptr = &next_desc->region.next;
+					next_desc = next_desc->region.next;
+				}
+
 				if (handler_desc->address_space.handler_flags &
 				    ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
 
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 1c9e250caef..fbe782348b0 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -1033,11 +1033,12 @@ acpi_error(const char *module_name, u32 line_number, const char *format, ...)
 {
 	va_list args;
 
-	acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
+	acpi_os_printf("ACPI Error: ");
 
 	va_start(args, format);
 	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+	acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
+		       line_number);
 	va_end(args);
 }
 
@@ -1047,12 +1048,12 @@ acpi_exception(const char *module_name,
 {
 	va_list args;
 
-	acpi_os_printf("ACPI Exception (%s-%04d): %s, ", module_name,
-		       line_number, acpi_format_exception(status));
+	acpi_os_printf("ACPI Exception: %s, ", acpi_format_exception(status));
 
 	va_start(args, format);
 	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+	acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
+		       line_number);
 	va_end(args);
 }
 
@@ -1061,11 +1062,12 @@ acpi_warning(const char *module_name, u32 line_number, const char *format, ...)
 {
 	va_list args;
 
-	acpi_os_printf("ACPI Warning (%s-%04d): ", module_name, line_number);
+	acpi_os_printf("ACPI Warning: ");
 
 	va_start(args, format);
 	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+	acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
+		       line_number);
 	va_end(args);
 }
 
@@ -1074,10 +1076,6 @@ acpi_info(const char *module_name, u32 line_number, const char *format, ...)
 {
 	va_list args;
 
-	/*
-	 * Removed module_name, line_number, and acpica version, not needed
-	 * for info output
-	 */
 	acpi_os_printf("ACPI: ");
 
 	va_start(args, format);
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index 26c93a748e6..80bb6515411 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -230,17 +230,18 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
 			if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
 				if (i == mutex_id) {
 					ACPI_ERROR((AE_INFO,
-						    "Mutex [%s] already acquired by this thread [%X]",
+						    "Mutex [%s] already acquired by this thread [%p]",
 						    acpi_ut_get_mutex_name
 						    (mutex_id),
-						    this_thread_id));
+						    ACPI_CAST_PTR(void,
+								  this_thread_id)));
 
 					return (AE_ALREADY_ACQUIRED);
 				}
 
 				ACPI_ERROR((AE_INFO,
-					    "Invalid acquire order: Thread %X owns [%s], wants [%s]",
-					    this_thread_id,
+					    "Invalid acquire order: Thread %p owns [%s], wants [%s]",
+					    ACPI_CAST_PTR(void, this_thread_id),
 					    acpi_ut_get_mutex_name(i),
 					    acpi_ut_get_mutex_name(mutex_id)));
 
@@ -251,24 +252,24 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
 #endif
 
 	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-			  "Thread %lX attempting to acquire Mutex [%s]\n",
-			  (unsigned long)this_thread_id,
+			  "Thread %p attempting to acquire Mutex [%s]\n",
+			  ACPI_CAST_PTR(void, this_thread_id),
 			  acpi_ut_get_mutex_name(mutex_id)));
 
 	status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
 				       ACPI_WAIT_FOREVER);
 	if (ACPI_SUCCESS(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-				  "Thread %lX acquired Mutex [%s]\n",
-				  (unsigned long)this_thread_id,
+				  "Thread %p acquired Mutex [%s]\n",
+				  ACPI_CAST_PTR(void, this_thread_id),
 				  acpi_ut_get_mutex_name(mutex_id)));
 
 		acpi_gbl_mutex_info[mutex_id].use_count++;
 		acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
 	} else {
 		ACPI_EXCEPTION((AE_INFO, status,
-				"Thread %lX could not acquire Mutex [%X]",
-				(unsigned long)this_thread_id, mutex_id));
+				"Thread %p could not acquire Mutex [%X]",
+				ACPI_CAST_PTR(void, this_thread_id), mutex_id));
 	}
 
 	return (status);
@@ -293,9 +294,8 @@ acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id)
 	ACPI_FUNCTION_NAME(ut_release_mutex);
 
 	this_thread_id = acpi_os_get_thread_id();
-	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-			  "Thread %lX releasing Mutex [%s]\n",
-			  (unsigned long)this_thread_id,
+	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Thread %p releasing Mutex [%s]\n",
+			  ACPI_CAST_PTR(void, this_thread_id),
 			  acpi_ut_get_mutex_name(mutex_id)));
 
 	if (mutex_id > ACPI_MAX_MUTEX) {
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9120717c070..2aa1908e5ce 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -535,6 +535,15 @@ config PATA_OPTIDMA
 
 	  If unsure, say N.
 
+config PATA_PALMLD
+	tristate "Palm LifeDrive PATA support"
+	depends on MACH_PALMLD
+	help
+	  This option enables support for Palm LifeDrive's internal ATA
+	  port via the new ATA layer.
+
+	  If unsure, say N.
+
 config PATA_PCMCIA
 	tristate "PCMCIA PATA support"
 	depends on PCMCIA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7f1ecf99528..1558059874f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
 obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
 obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
 obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
 obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 6273d98d00e..ac176da1f94 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -748,9 +748,9 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 /**
  * ata_acpi_exec_tfs - get then write drive taskfile settings
  * @dev: target ATA device
- * @nr_executed: out paramter for the number of executed commands
+ * @nr_executed: out parameter for the number of executed commands
  *
- * Evaluate _GTF and excute returned taskfiles.
+ * Evaluate _GTF and execute returned taskfiles.
  *
  * LOCKING:
  * EH context.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 94919ad03df..fa22f94ca41 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2864,7 +2864,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 /**
  *	ata_set_mode - Program timings and issue SET FEATURES - XFER
  *	@link: link on which timings will be programmed
- *	@r_failed_dev: out paramter for failed device
+ *	@r_failed_dev: out parameter for failed device
  *
  *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
  *	ata_set_mode() fails, pointer to the failing device is
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
new file mode 100644
index 00000000000..11fb4ccc74b
--- /dev/null
+++ b/drivers/ata/pata_palmld.c
@@ -0,0 +1,150 @@
+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ *		Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.sff_data_xfer		= ata_sff_data_xfer_noirq,
+	.cable_detect		= ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	void __iomem *mem;
+	int ret;
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* remap drive's physical memory address */
+	mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+	if (!mem)
+		return -ENOMEM;
+
+	/* request and activate power GPIO, IRQ GPIO */
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
+	if (ret)
+		goto err3;
+
+	/* reset the drive */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
+	msleep(30);
+	gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
+	msleep(30);
+
+	/* setup the ata port */
+	ap = host->ports[0];
+	ap->ops	= &palmld_port_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING;
+
+	/* memory mapping voodoo */
+	ap->ioaddr.cmd_addr = mem + 0x10;
+	ap->ioaddr.altstatus_addr = mem + 0xe;
+	ap->ioaddr.ctl_addr = mem + 0xe;
+
+	/* start the port */
+	ata_sff_std_ports(&ap->ioaddr);
+
+	/* activate host */
+	return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+					&palmld_sht);
+
+err3:
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+err2:
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+	return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+	struct ata_host *host = platform_get_drvdata(dev);
+
+	ata_host_detach(host);
+
+	/* power down the HDD */
+	gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
+
+	gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+	gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+
+	return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+	.driver	 = {
+		.name   = DRV_NAME,
+		.owner  = THIS_MODULE,
+	},
+	.probe		= palmld_pata_probe,
+	.remove		= __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+	return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+	platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index c6599618523..4b04a15146d 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -279,7 +279,7 @@ static struct device *next_device(struct klist_iter *i)
  *
  * NOTE: The device that returns a non-zero value is not retained
  * in any way, nor is its refcount incremented. If the caller needs
- * to retain this data, it should do, and increment the reference
+ * to retain this data, it should do so, and increment the reference
  * count in the supplied callback.
  */
 int bus_for_each_dev(struct bus_type *bus, struct device *start,
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 1977d4beb89..7ecb1938e59 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -22,6 +22,7 @@
 #include <linux/kallsyms.h>
 #include <linux/semaphore.h>
 #include <linux/mutex.h>
+#include <linux/async.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -161,10 +162,18 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj,
 	struct device *dev = to_dev(kobj);
 	int retval = 0;
 
-	/* add the major/minor if present */
+	/* add device node properties if present */
 	if (MAJOR(dev->devt)) {
+		const char *tmp;
+		const char *name;
+
 		add_uevent_var(env, "MAJOR=%u", MAJOR(dev->devt));
 		add_uevent_var(env, "MINOR=%u", MINOR(dev->devt));
+		name = device_get_nodename(dev, &tmp);
+		if (name) {
+			add_uevent_var(env, "DEVNAME=%s", name);
+			kfree(tmp);
+		}
 	}
 
 	if (dev->type && dev->type->name)
@@ -874,7 +883,7 @@ int device_add(struct device *dev)
 	 * the name, and force the use of dev_name()
 	 */
 	if (dev->init_name) {
-		dev_set_name(dev, dev->init_name);
+		dev_set_name(dev, "%s", dev->init_name);
 		dev->init_name = NULL;
 	}
 
@@ -1128,6 +1137,47 @@ static struct device *next_device(struct klist_iter *i)
 }
 
 /**
+ * device_get_nodename - path of device node file
+ * @dev: device
+ * @tmp: possibly allocated string
+ *
+ * Return the relative path of a possible device node.
+ * Non-default names may need to allocate a memory to compose
+ * a name. This memory is returned in tmp and needs to be
+ * freed by the caller.
+ */
+const char *device_get_nodename(struct device *dev, const char **tmp)
+{
+	char *s;
+
+	*tmp = NULL;
+
+	/* the device type may provide a specific name */
+	if (dev->type && dev->type->nodename)
+		*tmp = dev->type->nodename(dev);
+	if (*tmp)
+		return *tmp;
+
+	/* the class may provide a specific name */
+	if (dev->class && dev->class->nodename)
+		*tmp = dev->class->nodename(dev);
+	if (*tmp)
+		return *tmp;
+
+	/* return name without allocation, tmp == NULL */
+	if (strchr(dev_name(dev), '!') == NULL)
+		return dev_name(dev);
+
+	/* replace '!' in the name with '/' */
+	*tmp = kstrdup(dev_name(dev), GFP_KERNEL);
+	if (!*tmp)
+		return NULL;
+	while ((s = strchr(*tmp, '!')))
+		s[0] = '/';
+	return *tmp;
+}
+
+/**
  * device_for_each_child - device child iterator.
  * @parent: parent struct device.
  * @data: data for the callback.
@@ -1271,7 +1321,7 @@ struct device *__root_device_register(const char *name, struct module *owner)
 	if (!root)
 		return ERR_PTR(err);
 
-	err = dev_set_name(&root->dev, name);
+	err = dev_set_name(&root->dev, "%s", name);
 	if (err) {
 		kfree(root);
 		return ERR_PTR(err);
@@ -1665,4 +1715,5 @@ void device_shutdown(void)
 	kobject_put(sysfs_dev_char_kobj);
 	kobject_put(sysfs_dev_block_kobj);
 	kobject_put(dev_kobj);
+	async_synchronize_full();
 }
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 742cbe6b042..f0106875f01 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -226,7 +226,7 @@ static int __device_attach(struct device_driver *drv, void *data)
  * pair is found, break out and return.
  *
  * Returns 1 if the device was bound to a driver;
- * 0 if no matching device was found;
+ * 0 if no matching driver was found;
  * -ENODEV if the device is not registered.
  *
  * When called for a USB interface, @dev->parent->sem must be held.
@@ -320,6 +320,10 @@ static void __device_release_driver(struct device *dev)
 		devres_release_all(dev);
 		dev->driver = NULL;
 		klist_remove(&dev->p->knode_driver);
+		if (dev->bus)
+			blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
+						     BUS_NOTIFY_UNBOUND_DRIVER,
+						     dev);
 	}
 }
 
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 8a267c42762..ddeb819c8f8 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -40,7 +40,7 @@ static int loading_timeout = 60;	/* In seconds */
 static DEFINE_MUTEX(fw_lock);
 
 struct firmware_priv {
-	char fw_id[FIRMWARE_NAME_MAX];
+	char *fw_id;
 	struct completion completion;
 	struct bin_attribute attr_data;
 	struct firmware *fw;
@@ -355,8 +355,9 @@ static void fw_dev_release(struct device *dev)
 	for (i = 0; i < fw_priv->nr_pages; i++)
 		__free_page(fw_priv->pages[i]);
 	kfree(fw_priv->pages);
+	kfree(fw_priv->fw_id);
 	kfree(fw_priv);
-	kfree(dev);
+	put_device(dev);
 
 	module_put(THIS_MODULE);
 }
@@ -386,13 +387,19 @@ static int fw_register_device(struct device **dev_p, const char *fw_name,
 
 	init_completion(&fw_priv->completion);
 	fw_priv->attr_data = firmware_attr_data_tmpl;
-	strlcpy(fw_priv->fw_id, fw_name, FIRMWARE_NAME_MAX);
+	fw_priv->fw_id = kstrdup(fw_name, GFP_KERNEL);
+	if (!fw_priv->fw_id) {
+		dev_err(device, "%s: Firmware name allocation failed\n",
+			__func__);
+		retval = -ENOMEM;
+		goto error_kfree;
+	}
 
 	fw_priv->timeout.function = firmware_class_timeout;
 	fw_priv->timeout.data = (u_long) fw_priv;
 	init_timer(&fw_priv->timeout);
 
-	dev_set_name(f_dev, dev_name(device));
+	dev_set_name(f_dev, "%s", dev_name(device));
 	f_dev->parent = device;
 	f_dev->class = &firmware_class;
 	dev_set_drvdata(f_dev, fw_priv);
@@ -400,14 +407,17 @@ static int fw_register_device(struct device **dev_p, const char *fw_name,
 	retval = device_register(f_dev);
 	if (retval) {
 		dev_err(device, "%s: device_register failed\n", __func__);
-		goto error_kfree;
+		put_device(f_dev);
+		goto error_kfree_fw_id;
 	}
 	*dev_p = f_dev;
 	return 0;
 
+error_kfree_fw_id:
+	kfree(fw_priv->fw_id);
 error_kfree:
-	kfree(fw_priv);
 	kfree(f_dev);
+	kfree(fw_priv);
 	return retval;
 }
 
@@ -615,8 +625,9 @@ request_firmware_work_func(void *arg)
  * @cont: function will be called asynchronously when the firmware
  *	request is over.
  *
- *	Asynchronous variant of request_firmware() for contexts where
- *	it is not possible to sleep.
+ *	Asynchronous variant of request_firmware() for user contexts where
+ *	it is not possible to sleep for long time. It can't be called
+ *	in atomic contexts.
  **/
 int
 request_firmware_nowait(
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 40b809742a1..91d4087b403 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -72,10 +72,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 		       "Node %d Inactive(anon): %8lu kB\n"
 		       "Node %d Active(file):   %8lu kB\n"
 		       "Node %d Inactive(file): %8lu kB\n"
-#ifdef CONFIG_UNEVICTABLE_LRU
 		       "Node %d Unevictable:    %8lu kB\n"
 		       "Node %d Mlocked:        %8lu kB\n"
-#endif
 #ifdef CONFIG_HIGHMEM
 		       "Node %d HighTotal:      %8lu kB\n"
 		       "Node %d HighFree:       %8lu kB\n"
@@ -105,10 +103,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 		       nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
 		       nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
 		       nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
-#ifdef CONFIG_UNEVICTABLE_LRU
 		       nid, K(node_page_state(nid, NR_UNEVICTABLE)),
 		       nid, K(node_page_state(nid, NR_MLOCK)),
-#endif
 #ifdef CONFIG_HIGHMEM
 		       nid, K(i.totalhigh),
 		       nid, K(i.freehigh),
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index ead3f64c41d..81cb01bfc35 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -69,7 +69,8 @@ EXPORT_SYMBOL_GPL(platform_get_irq);
  * @name: resource name
  */
 struct resource *platform_get_resource_byname(struct platform_device *dev,
-					      unsigned int type, char *name)
+					      unsigned int type,
+					      const char *name)
 {
 	int i;
 
@@ -88,7 +89,7 @@ EXPORT_SYMBOL_GPL(platform_get_resource_byname);
  * @dev: platform device
  * @name: IRQ name
  */
-int platform_get_irq_byname(struct platform_device *dev, char *name)
+int platform_get_irq_byname(struct platform_device *dev, const char *name)
 {
 	struct resource *r = platform_get_resource_byname(dev, IORESOURCE_IRQ,
 							  name);
@@ -244,7 +245,7 @@ int platform_device_add(struct platform_device *pdev)
 	if (pdev->id != -1)
 		dev_set_name(&pdev->dev, "%s.%d", pdev->name,  pdev->id);
 	else
-		dev_set_name(&pdev->dev, pdev->name);
+		dev_set_name(&pdev->dev, "%s", pdev->name);
 
 	for (i = 0; i < pdev->num_resources; i++) {
 		struct resource *p, *r = &pdev->resource[i];
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 9742a78c9fe..79a9ae5238a 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -131,6 +131,8 @@ static struct kset *system_kset;
 
 int sysdev_class_register(struct sysdev_class *cls)
 {
+	int retval;
+
 	pr_debug("Registering sysdev class '%s'\n", cls->name);
 
 	INIT_LIST_HEAD(&cls->drivers);
@@ -138,7 +140,11 @@ int sysdev_class_register(struct sysdev_class *cls)
 	cls->kset.kobj.parent = &system_kset->kobj;
 	cls->kset.kobj.ktype = &ktype_sysdev_class;
 	cls->kset.kobj.kset = system_kset;
-	kobject_set_name(&cls->kset.kobj, cls->name);
+
+	retval = kobject_set_name(&cls->kset.kobj, "%s", cls->name);
+	if (retval)
+		return retval;
+
 	return kset_register(&cls->kset);
 }
 
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index ac5e05a98b2..bb72ada9f07 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -112,7 +112,7 @@ config GDROM
 	  with up to 1 GB of data. This drive will also read standard CD ROM
 	  disks. Select this option to access any disks in your GD ROM drive.
 	  Most users will want to say "Y" here.
-	  You can also build this as a module which will be called gdrom.ko
+	  You can also build this as a module which will be called gdrom.
 
 source "drivers/block/paride/Kconfig"
 
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index 200efc4d2c1..19888354188 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -266,6 +266,11 @@ static const struct file_operations aoe_fops = {
 	.owner = THIS_MODULE,
 };
 
+static char *aoe_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "etherd/%s", dev_name(dev));
+}
+
 int __init
 aoechr_init(void)
 {
@@ -283,6 +288,8 @@ aoechr_init(void)
 		unregister_chrdev(AOE_MAJOR, "aoechr");
 		return PTR_ERR(aoe_class);
 	}
+	aoe_class->nodename = aoe_nodename;
+
 	for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
 		device_create(aoe_class, NULL,
 			      MKDEV(AOE_MAJOR, chardevs[i].minor), NULL,
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 31693bc2444..965ece2c7e4 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -34,13 +34,6 @@ new_skb(ulong len)
 		skb_reset_mac_header(skb);
 		skb_reset_network_header(skb);
 		skb->protocol = __constant_htons(ETH_P_AOE);
-		skb->priority = 0;
-		skb->next = skb->prev = NULL;
-
-		/* tell the network layer not to perform IP checksums
-		 * or to get the NIC to do it
-		 */
-		skb->ip_summed = CHECKSUM_NONE;
 	}
 	return skb;
 }
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b22cec97ea1..c7a527c08a0 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -38,7 +38,6 @@
 #include <linux/hdreg.h>
 #include <linux/spinlock.h>
 #include <linux/compat.h>
-#include <linux/blktrace_api.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index 60de5a01e71..f703f547824 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -22,13 +22,12 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/mg_disk.h>
 
 #define MG_RES_SEC (CONFIG_MG_DISK_RES << 1)
 
 /* name for block device */
 #define MG_DISK_NAME "mgd"
-/* name for platform device */
-#define MG_DEV_NAME "mg_disk"
 
 #define MG_DISK_MAJ 0
 #define MG_DISK_MAX_PART 16
@@ -103,33 +102,8 @@
 #define MG_TMAX_SWRST_TO_RDY	500
 #define MG_TMAX_RSTOUT		3000
 
-/* device attribution */
-/* use mflash as boot device */
-#define MG_BOOT_DEV		(1 << 0)
-/* use mflash as storage device */
-#define MG_STORAGE_DEV		(1 << 1)
-/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
-#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
-
 #define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
 
-/* names of GPIO resource */
-#define MG_RST_PIN	"mg_rst"
-/* except MG_BOOT_DEV, reset-out pin should be assigned */
-#define MG_RSTOUT_PIN	"mg_rstout"
-
-/* private driver data */
-struct mg_drv_data {
-	/* disk resource */
-	u32 use_polling;
-
-	/* device attribution */
-	u32 dev_attr;
-
-	/* internally used */
-	struct mg_host *host;
-};
-
 /* main structure for mflash driver */
 struct mg_host {
 	struct device *dev;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index d57f1175948..83650e00632 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -430,7 +430,7 @@ static void pkt_sysfs_cleanup(void)
 /********************************************************************
   entries in debugfs
 
-  /debugfs/pktcdvd[0-7]/
+  /sys/kernel/debug/pktcdvd[0-7]/
 			info
 
  *******************************************************************/
@@ -2855,6 +2855,11 @@ static struct block_device_operations pktcdvd_ops = {
 	.media_changed =	pkt_media_changed,
 };
 
+static char *pktcdvd_nodename(struct gendisk *gd)
+{
+	return kasprintf(GFP_KERNEL, "pktcdvd/%s", gd->disk_name);
+}
+
 /*
  * Set up mapping from pktcdvd device to CD-ROM device.
  */
@@ -2907,6 +2912,7 @@ static int pkt_setup_dev(dev_t dev, dev_t* pkt_dev)
 	disk->fops = &pktcdvd_ops;
 	disk->flags = GENHD_FL_REMOVABLE;
 	strcpy(disk->disk_name, pd->name);
+	disk->nodename = pktcdvd_nodename;
 	disk->private_data = pd;
 	disk->queue = blk_alloc_queue(GFP_KERNEL);
 	if (!disk->queue)
@@ -3062,6 +3068,7 @@ static const struct file_operations pkt_ctl_fops = {
 static struct miscdevice pkt_misc = {
 	.minor 		= MISC_DYNAMIC_MINOR,
 	.name  		= DRIVER_NAME,
+	.name  		= "pktcdvd/control",
 	.fops  		= &pkt_ctl_fops
 };
 
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index aaeeb544228..34cbb7f3efa 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -120,7 +120,7 @@ static void ps3disk_scatter_gather(struct ps3_storage_device *dev,
 static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
 				     struct request *req)
 {
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 	int write = rq_data_dir(req), res;
 	const char *op = write ? "write" : "read";
 	u64 start_sector, sectors;
@@ -168,7 +168,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev,
 static int ps3disk_submit_flush_request(struct ps3_storage_device *dev,
 					struct request *req)
 {
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 	u64 res;
 
 	dev_dbg(&dev->sbd.core, "%s:%u: flush request\n", __func__, __LINE__);
@@ -213,7 +213,7 @@ static void ps3disk_do_request(struct ps3_storage_device *dev,
 static void ps3disk_request(struct request_queue *q)
 {
 	struct ps3_storage_device *dev = q->queuedata;
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 
 	if (priv->req) {
 		dev_dbg(&dev->sbd.core, "%s:%u busy\n", __func__, __LINE__);
@@ -245,7 +245,7 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data)
 		return IRQ_HANDLED;
 	}
 
-	priv = dev->sbd.core.driver_data;
+	priv = ps3_system_bus_get_drvdata(&dev->sbd);
 	req = priv->req;
 	if (!req) {
 		dev_dbg(&dev->sbd.core,
@@ -364,7 +364,7 @@ static void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs,
 
 static int ps3disk_identify(struct ps3_storage_device *dev)
 {
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 	struct lv1_ata_cmnd_block ata_cmnd;
 	u16 *id = dev->bounce_buf;
 	u64 res;
@@ -445,7 +445,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
 		goto fail;
 	}
 
-	dev->sbd.core.driver_data = priv;
+	ps3_system_bus_set_drvdata(_dev, priv);
 	spin_lock_init(&priv->lock);
 
 	dev->bounce_size = BOUNCE_SIZE;
@@ -523,7 +523,7 @@ fail_free_bounce:
 	kfree(dev->bounce_buf);
 fail_free_priv:
 	kfree(priv);
-	dev->sbd.core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(_dev, NULL);
 fail:
 	mutex_lock(&ps3disk_mask_mutex);
 	__clear_bit(devidx, &ps3disk_mask);
@@ -534,7 +534,7 @@ fail:
 static int ps3disk_remove(struct ps3_system_bus_device *_dev)
 {
 	struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
-	struct ps3disk_private *priv = dev->sbd.core.driver_data;
+	struct ps3disk_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
 
 	mutex_lock(&ps3disk_mask_mutex);
 	__clear_bit(MINOR(disk_devt(priv->gendisk)) / PS3DISK_MINORS,
@@ -548,7 +548,7 @@ static int ps3disk_remove(struct ps3_system_bus_device *_dev)
 	ps3stor_teardown(dev);
 	kfree(dev->bounce_buf);
 	kfree(priv);
-	dev->sbd.core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(_dev, NULL);
 	return 0;
 }
 
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
index 8eddef373a9..095f97e6066 100644
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -14,8 +14,10 @@
 #include <linux/seq_file.h>
 
 #include <asm/firmware.h>
+#include <asm/iommu.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
+#include <asm/ps3gpu.h>
 
 
 #define DEVICE_NAME		"ps3vram"
@@ -45,8 +47,6 @@
 #define NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN	0x0000030c
 #define NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY	0x00000104
 
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601
-
 #define CACHE_PAGE_PRESENT 1
 #define CACHE_PAGE_DIRTY   2
 
@@ -72,8 +72,7 @@ struct ps3vram_priv {
 	u64 memory_handle;
 	u64 context_handle;
 	u32 *ctrl;
-	u32 *reports;
-	u8 __iomem *ddr_base;
+	void *reports;
 	u8 *xdr_buf;
 
 	u32 *fifo_base;
@@ -81,8 +80,8 @@ struct ps3vram_priv {
 
 	struct ps3vram_cache cache;
 
-	/* Used to serialize cache/DMA operations */
-	struct mutex lock;
+	spinlock_t lock;	/* protecting list of bios */
+	struct bio_list list;
 };
 
 
@@ -103,15 +102,15 @@ static char *size = "256M";
 module_param(size, charp, 0);
 MODULE_PARM_DESC(size, "memory size");
 
-static u32 *ps3vram_get_notifier(u32 *reports, int notifier)
+static u32 *ps3vram_get_notifier(void *reports, int notifier)
 {
-	return (void *)reports + DMA_NOTIFIER_OFFSET_BASE +
+	return reports + DMA_NOTIFIER_OFFSET_BASE +
 	       DMA_NOTIFIER_SIZE * notifier;
 }
 
 static void ps3vram_notifier_reset(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
 	int i;
 
@@ -122,7 +121,7 @@ static void ps3vram_notifier_reset(struct ps3_system_bus_device *dev)
 static int ps3vram_notifier_wait(struct ps3_system_bus_device *dev,
 				 unsigned int timeout_ms)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
 	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
 
@@ -137,7 +136,7 @@ static int ps3vram_notifier_wait(struct ps3_system_bus_device *dev,
 
 static void ps3vram_init_ring(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
 	priv->ctrl[CTRL_GET] = FIFO_BASE + FIFO_OFFSET;
@@ -146,7 +145,7 @@ static void ps3vram_init_ring(struct ps3_system_bus_device *dev)
 static int ps3vram_wait_ring(struct ps3_system_bus_device *dev,
 			     unsigned int timeout_ms)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
 
 	do {
@@ -175,7 +174,7 @@ static void ps3vram_begin_ring(struct ps3vram_priv *priv, u32 chan, u32 tag,
 
 static void ps3vram_rewind_ring(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	int status;
 
 	ps3vram_out_ring(priv, 0x20000000 | (FIFO_BASE + FIFO_OFFSET));
@@ -183,20 +182,17 @@ static void ps3vram_rewind_ring(struct ps3_system_bus_device *dev)
 	priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
 
 	/* asking the HV for a blit will kick the FIFO */
-	status = lv1_gpu_context_attribute(priv->context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
-					   0, 0, 0);
+	status = lv1_gpu_fb_blit(priv->context_handle, 0, 0, 0, 0);
 	if (status)
-		dev_err(&dev->core,
-			"%s: lv1_gpu_context_attribute failed %d\n", __func__,
-			status);
+		dev_err(&dev->core, "%s: lv1_gpu_fb_blit failed %d\n",
+			__func__, status);
 
 	priv->fifo_ptr = priv->fifo_base;
 }
 
 static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	int status;
 
 	mutex_lock(&ps3_gpu_mutex);
@@ -205,13 +201,10 @@ static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
 			       (priv->fifo_ptr - priv->fifo_base) * sizeof(u32);
 
 	/* asking the HV for a blit will kick the FIFO */
-	status = lv1_gpu_context_attribute(priv->context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
-					   0, 0, 0);
+	status = lv1_gpu_fb_blit(priv->context_handle, 0, 0, 0, 0);
 	if (status)
-		dev_err(&dev->core,
-			"%s: lv1_gpu_context_attribute failed %d\n", __func__,
-			status);
+		dev_err(&dev->core, "%s: lv1_gpu_fb_blit failed %d\n",
+			__func__, status);
 
 	if ((priv->fifo_ptr - priv->fifo_base) * sizeof(u32) >
 	    FIFO_SIZE - 1024) {
@@ -225,7 +218,7 @@ static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
 
 static void ps3vram_bind(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0, 1);
 	ps3vram_out_ring(priv, 0x31337303);
@@ -248,7 +241,7 @@ static int ps3vram_upload(struct ps3_system_bus_device *dev,
 			  unsigned int src_offset, unsigned int dst_offset,
 			  int len, int count)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	ps3vram_begin_ring(priv, UPLOAD_SUBCH,
 			   NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
@@ -280,7 +273,7 @@ static int ps3vram_download(struct ps3_system_bus_device *dev,
 			    unsigned int src_offset, unsigned int dst_offset,
 			    int len, int count)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
 			   NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
@@ -310,7 +303,7 @@ static int ps3vram_download(struct ps3_system_bus_device *dev,
 
 static void ps3vram_cache_evict(struct ps3_system_bus_device *dev, int entry)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct ps3vram_cache *cache = &priv->cache;
 
 	if (!(cache->tags[entry].flags & CACHE_PAGE_DIRTY))
@@ -332,7 +325,7 @@ static void ps3vram_cache_evict(struct ps3_system_bus_device *dev, int entry)
 static void ps3vram_cache_load(struct ps3_system_bus_device *dev, int entry,
 			       unsigned int address)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct ps3vram_cache *cache = &priv->cache;
 
 	dev_dbg(&dev->core, "Fetching %d: 0x%08x\n", entry, address);
@@ -352,7 +345,7 @@ static void ps3vram_cache_load(struct ps3_system_bus_device *dev, int entry,
 
 static void ps3vram_cache_flush(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct ps3vram_cache *cache = &priv->cache;
 	int i;
 
@@ -366,7 +359,7 @@ static void ps3vram_cache_flush(struct ps3_system_bus_device *dev)
 static unsigned int ps3vram_cache_match(struct ps3_system_bus_device *dev,
 					loff_t address)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct ps3vram_cache *cache = &priv->cache;
 	unsigned int base;
 	unsigned int offset;
@@ -400,7 +393,7 @@ static unsigned int ps3vram_cache_match(struct ps3_system_bus_device *dev,
 
 static int ps3vram_cache_init(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	priv->cache.page_count = CACHE_PAGE_COUNT;
 	priv->cache.page_size = CACHE_PAGE_SIZE;
@@ -419,7 +412,7 @@ static int ps3vram_cache_init(struct ps3_system_bus_device *dev)
 
 static void ps3vram_cache_cleanup(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	ps3vram_cache_flush(dev);
 	kfree(priv->cache.tags);
@@ -428,7 +421,7 @@ static void ps3vram_cache_cleanup(struct ps3_system_bus_device *dev)
 static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
 			size_t len, size_t *retlen, u_char *buf)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	unsigned int cached, count;
 
 	dev_dbg(&dev->core, "%s: from=0x%08x len=0x%zx\n", __func__,
@@ -449,8 +442,6 @@ static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
 		offset = (unsigned int) (from & (priv->cache.page_size - 1));
 		avail  = priv->cache.page_size - offset;
 
-		mutex_lock(&priv->lock);
-
 		entry = ps3vram_cache_match(dev, from);
 		cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
 
@@ -462,8 +453,6 @@ static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
 			avail = count;
 		memcpy(buf, priv->xdr_buf + cached, avail);
 
-		mutex_unlock(&priv->lock);
-
 		buf += avail;
 		count -= avail;
 		from += avail;
@@ -476,7 +465,7 @@ static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
 static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
 			 size_t len, size_t *retlen, const u_char *buf)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	unsigned int cached, count;
 
 	if (to >= priv->size)
@@ -494,8 +483,6 @@ static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
 		offset = (unsigned int) (to & (priv->cache.page_size - 1));
 		avail  = priv->cache.page_size - offset;
 
-		mutex_lock(&priv->lock);
-
 		entry = ps3vram_cache_match(dev, to);
 		cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
 
@@ -509,8 +496,6 @@ static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
 
 		priv->cache.tags[entry].flags |= CACHE_PAGE_DIRTY;
 
-		mutex_unlock(&priv->lock);
-
 		buf += avail;
 		count -= avail;
 		to += avail;
@@ -543,28 +528,26 @@ static const struct file_operations ps3vram_proc_fops = {
 
 static void __devinit ps3vram_proc_init(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	struct proc_dir_entry *pde;
 
-	pde = proc_create(DEVICE_NAME, 0444, NULL, &ps3vram_proc_fops);
-	if (!pde) {
+	pde = proc_create_data(DEVICE_NAME, 0444, NULL, &ps3vram_proc_fops,
+			       priv);
+	if (!pde)
 		dev_warn(&dev->core, "failed to create /proc entry\n");
-		return;
-	}
-	pde->data = priv;
 }
 
-static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
+static struct bio *ps3vram_do_bio(struct ps3_system_bus_device *dev,
+				  struct bio *bio)
 {
-	struct ps3_system_bus_device *dev = q->queuedata;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	int write = bio_data_dir(bio) == WRITE;
 	const char *op = write ? "write" : "read";
 	loff_t offset = bio->bi_sector << 9;
 	int error = 0;
 	struct bio_vec *bvec;
 	unsigned int i;
-
-	dev_dbg(&dev->core, "%s\n", __func__);
+	struct bio *next;
 
 	bio_for_each_segment(bvec, bio, i) {
 		/* PS3 is ppc64, so we don't handle highmem */
@@ -585,6 +568,7 @@ static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
 
 		if (retlen != len) {
 			dev_err(&dev->core, "Short %s\n", op);
+			error = -EIO;
 			goto out;
 		}
 
@@ -594,7 +578,35 @@ static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
 	dev_dbg(&dev->core, "%s completed\n", op);
 
 out:
+	spin_lock_irq(&priv->lock);
+	bio_list_pop(&priv->list);
+	next = bio_list_peek(&priv->list);
+	spin_unlock_irq(&priv->lock);
+
 	bio_endio(bio, error);
+	return next;
+}
+
+static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
+{
+	struct ps3_system_bus_device *dev = q->queuedata;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
+	int busy;
+
+	dev_dbg(&dev->core, "%s\n", __func__);
+
+	spin_lock_irq(&priv->lock);
+	busy = !bio_list_empty(&priv->list);
+	bio_list_add(&priv->list, bio);
+	spin_unlock_irq(&priv->lock);
+
+	if (busy)
+		return 0;
+
+	do {
+		bio = ps3vram_do_bio(dev, bio);
+	} while (bio);
+
 	return 0;
 }
 
@@ -604,8 +616,8 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 	int error, status;
 	struct request_queue *queue;
 	struct gendisk *gendisk;
-	u64 ddr_lpar, ctrl_lpar, info_lpar, reports_lpar, ddr_size,
-	    reports_size;
+	u64 ddr_size, ddr_lpar, ctrl_lpar, info_lpar, reports_lpar,
+	    reports_size, xdr_lpar;
 	char *rest;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -614,10 +626,9 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 		goto fail;
 	}
 
-	mutex_init(&priv->lock);
-	dev->core.driver_data = priv;
-
-	priv = dev->core.driver_data;
+	spin_lock_init(&priv->lock);
+	bio_list_init(&priv->list);
+	ps3_system_bus_set_drvdata(dev, priv);
 
 	/* Allocate XDR buffer (1MiB aligned) */
 	priv->xdr_buf = (void *)__get_free_pages(GFP_KERNEL,
@@ -636,7 +647,7 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 	if (ps3_open_hv_device(dev)) {
 		dev_err(&dev->core, "ps3_open_hv_device failed\n");
 		error = -EAGAIN;
-		goto out_close_gpu;
+		goto out_free_xdr_buf;
 	}
 
 	/* Request memory */
@@ -660,7 +671,7 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 		dev_err(&dev->core, "lv1_gpu_memory_allocate failed %d\n",
 			status);
 		error = -ENOMEM;
-		goto out_free_xdr_buf;
+		goto out_close_gpu;
 	}
 
 	/* Request context */
@@ -676,9 +687,11 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 	}
 
 	/* Map XDR buffer to RSX */
+	xdr_lpar = ps3_mm_phys_to_lpar(__pa(priv->xdr_buf));
 	status = lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
-				       ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
-				       XDR_BUF_SIZE, 0);
+				       xdr_lpar, XDR_BUF_SIZE,
+				       CBE_IOPTE_PP_W | CBE_IOPTE_PP_R |
+				       CBE_IOPTE_M);
 	if (status) {
 		dev_err(&dev->core, "lv1_gpu_context_iomap failed %d\n",
 			status);
@@ -686,19 +699,11 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
 		goto out_free_context;
 	}
 
-	priv->ddr_base = ioremap_flags(ddr_lpar, ddr_size, _PAGE_NO_CACHE);
-
-	if (!priv->ddr_base) {
-		dev_err(&dev->core, "ioremap DDR failed\n");
-		error = -ENOMEM;
-		goto out_free_context;
-	}
-
 	priv->ctrl = ioremap(ctrl_lpar, 64 * 1024);
 	if (!priv->ctrl) {
 		dev_err(&dev->core, "ioremap CTRL failed\n");
 		error = -ENOMEM;
-		goto out_unmap_vram;
+		goto out_unmap_context;
 	}
 
 	priv->reports = ioremap(reports_lpar, reports_size);
@@ -775,8 +780,9 @@ out_unmap_reports:
 	iounmap(priv->reports);
 out_unmap_ctrl:
 	iounmap(priv->ctrl);
-out_unmap_vram:
-	iounmap(priv->ddr_base);
+out_unmap_context:
+	lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF, xdr_lpar,
+			      XDR_BUF_SIZE, CBE_IOPTE_M);
 out_free_context:
 	lv1_gpu_context_free(priv->context_handle);
 out_free_memory:
@@ -787,14 +793,14 @@ out_free_xdr_buf:
 	free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
 fail_free_priv:
 	kfree(priv);
-	dev->core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(dev, NULL);
 fail:
 	return error;
 }
 
 static int ps3vram_remove(struct ps3_system_bus_device *dev)
 {
-	struct ps3vram_priv *priv = dev->core.driver_data;
+	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 
 	del_gendisk(priv->gendisk);
 	put_disk(priv->gendisk);
@@ -803,13 +809,15 @@ static int ps3vram_remove(struct ps3_system_bus_device *dev)
 	ps3vram_cache_cleanup(dev);
 	iounmap(priv->reports);
 	iounmap(priv->ctrl);
-	iounmap(priv->ddr_base);
+	lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
+			      ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
+			      XDR_BUF_SIZE, CBE_IOPTE_M);
 	lv1_gpu_context_free(priv->context_handle);
 	lv1_gpu_memory_free(priv->memory_handle);
 	ps3_close_hv_device(dev);
 	free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
 	kfree(priv);
-	dev->core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(dev, NULL);
 	return 0;
 }
 
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index c1996829d5e..e53284767f7 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -753,12 +753,12 @@ static int blkfront_probe(struct xenbus_device *dev,
 
 	/* Front end dir is a number, which is used as the id. */
 	info->handle = simple_strtoul(strrchr(dev->nodename, '/')+1, NULL, 0);
-	dev->dev.driver_data = info;
+	dev_set_drvdata(&dev->dev, info);
 
 	err = talk_to_backend(dev, info);
 	if (err) {
 		kfree(info);
-		dev->dev.driver_data = NULL;
+		dev_set_drvdata(&dev->dev, NULL);
 		return err;
 	}
 
@@ -843,7 +843,7 @@ static int blkif_recover(struct blkfront_info *info)
  */
 static int blkfront_resume(struct xenbus_device *dev)
 {
-	struct blkfront_info *info = dev->dev.driver_data;
+	struct blkfront_info *info = dev_get_drvdata(&dev->dev);
 	int err;
 
 	dev_dbg(&dev->dev, "blkfront_resume: %s\n", dev->nodename);
@@ -922,7 +922,7 @@ static void blkfront_connect(struct blkfront_info *info)
  */
 static void blkfront_closing(struct xenbus_device *dev)
 {
-	struct blkfront_info *info = dev->dev.driver_data;
+	struct blkfront_info *info = dev_get_drvdata(&dev->dev);
 	unsigned long flags;
 
 	dev_dbg(&dev->dev, "blkfront_closing: %s removed\n", dev->nodename);
@@ -957,7 +957,7 @@ static void blkfront_closing(struct xenbus_device *dev)
 static void backend_changed(struct xenbus_device *dev,
 			    enum xenbus_state backend_state)
 {
-	struct blkfront_info *info = dev->dev.driver_data;
+	struct blkfront_info *info = dev_get_drvdata(&dev->dev);
 	struct block_device *bd;
 
 	dev_dbg(&dev->dev, "blkfront:backend_changed.\n");
@@ -997,7 +997,7 @@ static void backend_changed(struct xenbus_device *dev,
 
 static int blkfront_remove(struct xenbus_device *dev)
 {
-	struct blkfront_info *info = dev->dev.driver_data;
+	struct blkfront_info *info = dev_get_drvdata(&dev->dev);
 
 	dev_dbg(&dev->dev, "blkfront_remove: %s removed\n", dev->nodename);
 
@@ -1010,7 +1010,7 @@ static int blkfront_remove(struct xenbus_device *dev)
 
 static int blkfront_is_ready(struct xenbus_device *dev)
 {
-	struct blkfront_info *info = dev->dev.driver_data;
+	struct blkfront_info *info = dev_get_drvdata(&dev->dev);
 
 	return info->is_ready;
 }
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 901bdd95655..2cc7b3266ea 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -415,6 +415,8 @@ static int dtl1_hci_send_frame(struct sk_buff *skb)
 		hdev->stat.sco_tx++;
 		nsh.type = 0x83;
 		break;
+	default:
+		return -EILSEQ;
 	};
 
 	nsh.zero = 0;
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 0bbefba6469..1df9dda2e37 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -40,7 +40,7 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
-#define VERSION "1.2"
+#define VERSION "1.3"
 
 static int minor = MISC_DYNAMIC_MINOR;
 
@@ -51,14 +51,8 @@ struct vhci_data {
 
 	wait_queue_head_t read_wait;
 	struct sk_buff_head readq;
-
-	struct fasync_struct *fasync;
 };
 
-#define VHCI_FASYNC	0x0010
-
-static struct miscdevice vhci_miscdev;
-
 static int vhci_open_dev(struct hci_dev *hdev)
 {
 	set_bit(HCI_RUNNING, &hdev->flags);
@@ -105,9 +99,6 @@ static int vhci_send_frame(struct sk_buff *skb)
 	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
 	skb_queue_tail(&data->readq, skb);
 
-	if (data->flags & VHCI_FASYNC)
-		kill_fasync(&data->fasync, SIGIO, POLL_IN);
-
 	wake_up_interruptible(&data->read_wait);
 
 	return 0;
@@ -179,41 +170,31 @@ static inline ssize_t vhci_put_user(struct vhci_data *data,
 static ssize_t vhci_read(struct file *file,
 				char __user *buf, size_t count, loff_t *pos)
 {
-	DECLARE_WAITQUEUE(wait, current);
 	struct vhci_data *data = file->private_data;
 	struct sk_buff *skb;
 	ssize_t ret = 0;
 
-	add_wait_queue(&data->read_wait, &wait);
 	while (count) {
-		set_current_state(TASK_INTERRUPTIBLE);
-
 		skb = skb_dequeue(&data->readq);
-		if (!skb) {
-			if (file->f_flags & O_NONBLOCK) {
-				ret = -EAGAIN;
-				break;
-			}
-
-			if (signal_pending(current)) {
-				ret = -ERESTARTSYS;
-				break;
-			}
-
-			schedule();
-			continue;
+		if (skb) {
+			ret = vhci_put_user(data, skb, buf, count);
+			if (ret < 0)
+				skb_queue_head(&data->readq, skb);
+			else
+				kfree_skb(skb);
+			break;
 		}
 
-		if (access_ok(VERIFY_WRITE, buf, count))
-			ret = vhci_put_user(data, skb, buf, count);
-		else
-			ret = -EFAULT;
+		if (file->f_flags & O_NONBLOCK) {
+			ret = -EAGAIN;
+			break;
+		}
 
-		kfree_skb(skb);
-		break;
+		ret = wait_event_interruptible(data->read_wait,
+					!skb_queue_empty(&data->readq));
+		if (ret < 0)
+			break;
 	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&data->read_wait, &wait);
 
 	return ret;
 }
@@ -223,9 +204,6 @@ static ssize_t vhci_write(struct file *file,
 {
 	struct vhci_data *data = file->private_data;
 
-	if (!access_ok(VERIFY_READ, buf, count))
-		return -EFAULT;
-
 	return vhci_get_user(data, buf, count);
 }
 
@@ -259,11 +237,9 @@ static int vhci_open(struct inode *inode, struct file *file)
 	skb_queue_head_init(&data->readq);
 	init_waitqueue_head(&data->read_wait);
 
-	lock_kernel();
 	hdev = hci_alloc_dev();
 	if (!hdev) {
 		kfree(data);
-		unlock_kernel();
 		return -ENOMEM;
 	}
 
@@ -284,12 +260,10 @@ static int vhci_open(struct inode *inode, struct file *file)
 		BT_ERR("Can't register HCI device");
 		kfree(data);
 		hci_free_dev(hdev);
-		unlock_kernel();
 		return -EBUSY;
 	}
 
 	file->private_data = data;
-	unlock_kernel();
 
 	return nonseekable_open(inode, file);
 }
@@ -310,48 +284,25 @@ static int vhci_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int vhci_fasync(int fd, struct file *file, int on)
-{
-	struct vhci_data *data = file->private_data;
-	int err = 0;
-
-	lock_kernel();
-	err = fasync_helper(fd, file, on, &data->fasync);
-	if (err < 0)
-		goto out;
-
-	if (on)
-		data->flags |= VHCI_FASYNC;
-	else
-		data->flags &= ~VHCI_FASYNC;
-
-out:
-	unlock_kernel();
-	return err;
-}
-
 static const struct file_operations vhci_fops = {
-	.owner		= THIS_MODULE,
 	.read		= vhci_read,
 	.write		= vhci_write,
 	.poll		= vhci_poll,
 	.ioctl		= vhci_ioctl,
 	.open		= vhci_open,
 	.release	= vhci_release,
-	.fasync		= vhci_fasync,
 };
 
 static struct miscdevice vhci_miscdev= {
-	.name		= "vhci",
-	.fops		= &vhci_fops,
+	.name	= "vhci",
+	.fops	= &vhci_fops,
+	.minor	= MISC_DYNAMIC_MINOR,
 };
 
 static int __init vhci_init(void)
 {
 	BT_INFO("Virtual HCI driver ver %s", VERSION);
 
-	vhci_miscdev.minor = minor;
-
 	if (misc_register(&vhci_miscdev) < 0) {
 		BT_ERR("Can't register misc device with minor %d", minor);
 		return -EIO;
@@ -369,9 +320,6 @@ static void __exit vhci_exit(void)
 module_init(vhci_init);
 module_exit(vhci_exit);
 
-module_param(minor, int, 0444);
-MODULE_PARM_DESC(minor, "Miscellaneous minor device number");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b1e9652c0d9..30bae6de6a0 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -692,7 +692,7 @@ config HVCS
 	  this driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called hvcs.ko.  Additionally, this module
+	  module will be called hvcs.  Additionally, this module
 	  will depend on arch specific APIs exported from hvcserver.ko
 	  which will also be compiled when this driver is built as a
 	  module.
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index fd3ebd1be57..72429b6b2fa 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -779,7 +779,7 @@ static void change_speed(struct async_struct *info,
 		info->IER |= UART_IER_MSI;
 	}
 	/* TBD:
-	 * Does clearing IER_MSI imply that we should disbale the VBL interrupt ?
+	 * Does clearing IER_MSI imply that we should disable the VBL interrupt ?
 	 */
 
 	/*
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 54481a88776..86105efb4eb 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -4,7 +4,7 @@
  * This HVC device driver provides terminal access using
  * z/VM IUCV communication paths.
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008, 2009
  *
  * Author(s):	Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
  */
@@ -15,6 +15,7 @@
 #include <asm/ebcdic.h>
 #include <linux/ctype.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/init.h>
 #include <linux/mempool.h>
 #include <linux/moduleparam.h>
@@ -74,6 +75,7 @@ struct hvc_iucv_private {
 	wait_queue_head_t	sndbuf_waitq;	/* wait for send completion */
 	struct list_head	tty_outqueue;	/* outgoing IUCV messages */
 	struct list_head	tty_inqueue;	/* incoming IUCV messages */
+	struct device		*dev;		/* device structure */
 };
 
 struct iucv_tty_buffer {
@@ -542,7 +544,68 @@ static void flush_sndbuf_sync(struct hvc_iucv_private *priv)
 
 	if (sync_wait)
 		wait_event_timeout(priv->sndbuf_waitq,
-				   tty_outqueue_empty(priv), HZ);
+				   tty_outqueue_empty(priv), HZ/10);
+}
+
+/**
+ * hvc_iucv_hangup() - Sever IUCV path and schedule hvc tty hang up
+ * @priv:	Pointer to hvc_iucv_private structure
+ *
+ * This routine severs an existing IUCV communication path and hangs
+ * up the underlying HVC terminal device.
+ * The hang-up occurs only if an IUCV communication path is established;
+ * otherwise there is no need to hang up the terminal device.
+ *
+ * The IUCV HVC hang-up is separated into two steps:
+ * 1. After the IUCV path has been severed, the iucv_state is set to
+ *    IUCV_SEVERED.
+ * 2. Later, when the HVC thread calls hvc_iucv_get_chars(), the
+ *    IUCV_SEVERED state causes the tty hang-up in the HVC layer.
+ *
+ * If the tty has not yet been opened, clean up the hvc_iucv_private
+ * structure to allow re-connects.
+ * If the tty has been opened, let get_chars() return -EPIPE to signal
+ * the HVC layer to hang up the tty and, if so, wake up the HVC thread
+ * to call get_chars()...
+ *
+ * Special notes on hanging up a HVC terminal instantiated as console:
+ * Hang-up:	1. do_tty_hangup() replaces file ops (= hung_up_tty_fops)
+ *		2. do_tty_hangup() calls tty->ops->close() for console_filp
+ *			=> no hangup notifier is called by HVC (default)
+ *		2. hvc_close() returns because of tty_hung_up_p(filp)
+ *			=> no delete notifier is called!
+ * Finally, the back-end is not being notified, thus, the tty session is
+ * kept active (TTY_OPEN) to be ready for re-connects.
+ *
+ * Locking:	spin_lock(&priv->lock) w/o disabling bh
+ */
+static void hvc_iucv_hangup(struct hvc_iucv_private *priv)
+{
+	struct iucv_path *path;
+
+	path = NULL;
+	spin_lock(&priv->lock);
+	if (priv->iucv_state == IUCV_CONNECTED) {
+		path = priv->path;
+		priv->path = NULL;
+		priv->iucv_state = IUCV_SEVERED;
+		if (priv->tty_state == TTY_CLOSED)
+			hvc_iucv_cleanup(priv);
+		else
+			/* console is special (see above) */
+			if (priv->is_console) {
+				hvc_iucv_cleanup(priv);
+				priv->tty_state = TTY_OPENED;
+			} else
+				hvc_kick();
+	}
+	spin_unlock(&priv->lock);
+
+	/* finally sever path (outside of priv->lock due to lock ordering) */
+	if (path) {
+		iucv_path_sever(path, NULL);
+		iucv_path_free(path);
+	}
 }
 
 /**
@@ -735,11 +798,8 @@ out_path_handled:
  * @ipuser:	User specified data for this path
  *		(AF_IUCV: port/service name and originator port)
  *
- * The function also severs the path (as required by the IUCV protocol) and
- * sets the iucv state to IUCV_SEVERED for the associated struct
- * hvc_iucv_private instance. Later, the IUCV_SEVERED state triggers a tty
- * hangup (hvc_iucv_get_chars() / hvc_iucv_write()).
- * If tty portion of the HVC is closed, clean up the outqueue.
+ * This function calls the hvc_iucv_hangup() function for the
+ * respective IUCV HVC terminal.
  *
  * Locking:	struct hvc_iucv_private->lock
  */
@@ -747,33 +807,7 @@ static void hvc_iucv_path_severed(struct iucv_path *path, u8 ipuser[16])
 {
 	struct hvc_iucv_private *priv = path->private;
 
-	spin_lock(&priv->lock);
-	priv->iucv_state = IUCV_SEVERED;
-
-	/* If the tty has not yet been opened, clean up the hvc_iucv_private
-	 * structure to allow re-connects.
-	 * This is also done for our console device because console hangups
-	 * are handled specially and no notifier is called by HVC.
-	 * The tty session is active (TTY_OPEN) and ready for re-connects...
-	 *
-	 * If it has been opened, let get_chars() return -EPIPE to signal the
-	 * HVC layer to hang up the tty.
-	 * If so, we need to wake up the HVC thread to call get_chars()...
-	 */
-	priv->path = NULL;
-	if (priv->tty_state == TTY_CLOSED)
-		hvc_iucv_cleanup(priv);
-	else
-		if (priv->is_console) {
-			hvc_iucv_cleanup(priv);
-			priv->tty_state = TTY_OPENED;
-		} else
-			hvc_kick();
-	spin_unlock(&priv->lock);
-
-	/* finally sever path (outside of priv->lock due to lock ordering) */
-	iucv_path_sever(path, ipuser);
-	iucv_path_free(path);
+	hvc_iucv_hangup(priv);
 }
 
 /**
@@ -853,6 +887,37 @@ static void hvc_iucv_msg_complete(struct iucv_path *path,
 	destroy_tty_buffer_list(&list_remove);
 }
 
+/**
+ * hvc_iucv_pm_freeze() - Freeze PM callback
+ * @dev:	IUVC HVC terminal device
+ *
+ * Sever an established IUCV communication path and
+ * trigger a hang-up of the underlying HVC terminal.
+ */
+static int hvc_iucv_pm_freeze(struct device *dev)
+{
+	struct hvc_iucv_private *priv = dev_get_drvdata(dev);
+
+	local_bh_disable();
+	hvc_iucv_hangup(priv);
+	local_bh_enable();
+
+	return 0;
+}
+
+/**
+ * hvc_iucv_pm_restore_thaw() - Thaw and restore PM callback
+ * @dev:	IUVC HVC terminal device
+ *
+ * Wake up the HVC thread to trigger hang-up and respective
+ * HVC back-end notifier invocations.
+ */
+static int hvc_iucv_pm_restore_thaw(struct device *dev)
+{
+	hvc_kick();
+	return 0;
+}
+
 
 /* HVC operations */
 static struct hv_ops hvc_iucv_ops = {
@@ -863,6 +928,20 @@ static struct hv_ops hvc_iucv_ops = {
 	.notifier_hangup = hvc_iucv_notifier_hangup,
 };
 
+/* Suspend / resume device operations */
+static struct dev_pm_ops hvc_iucv_pm_ops = {
+	.freeze	  = hvc_iucv_pm_freeze,
+	.thaw	  = hvc_iucv_pm_restore_thaw,
+	.restore  = hvc_iucv_pm_restore_thaw,
+};
+
+/* IUCV HVC device driver */
+static struct device_driver hvc_iucv_driver = {
+	.name = KMSG_COMPONENT,
+	.bus  = &iucv_bus,
+	.pm   = &hvc_iucv_pm_ops,
+};
+
 /**
  * hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance
  * @id:			hvc_iucv_table index
@@ -897,14 +976,12 @@ static int __init hvc_iucv_alloc(int id, unsigned int is_console)
 	/* set console flag */
 	priv->is_console = is_console;
 
-	/* finally allocate hvc */
+	/* allocate hvc device */
 	priv->hvc = hvc_alloc(HVC_IUCV_MAGIC + id, /*		  PAGE_SIZE */
 			      HVC_IUCV_MAGIC + id, &hvc_iucv_ops, 256);
 	if (IS_ERR(priv->hvc)) {
 		rc = PTR_ERR(priv->hvc);
-		free_page((unsigned long) priv->sndbuf);
-		kfree(priv);
-		return rc;
+		goto out_error_hvc;
 	}
 
 	/* notify HVC thread instead of using polling */
@@ -915,8 +992,45 @@ static int __init hvc_iucv_alloc(int id, unsigned int is_console)
 	memcpy(priv->srv_name, name, 8);
 	ASCEBC(priv->srv_name, 8);
 
+	/* create and setup device */
+	priv->dev = kzalloc(sizeof(*priv->dev), GFP_KERNEL);
+	if (!priv->dev) {
+		rc = -ENOMEM;
+		goto out_error_dev;
+	}
+	dev_set_name(priv->dev, "hvc_iucv%d", id);
+	dev_set_drvdata(priv->dev, priv);
+	priv->dev->bus = &iucv_bus;
+	priv->dev->parent = iucv_root;
+	priv->dev->driver = &hvc_iucv_driver;
+	priv->dev->release = (void (*)(struct device *)) kfree;
+	rc = device_register(priv->dev);
+	if (rc) {
+		kfree(priv->dev);
+		goto out_error_dev;
+	}
+
 	hvc_iucv_table[id] = priv;
 	return 0;
+
+out_error_dev:
+	hvc_remove(priv->hvc);
+out_error_hvc:
+	free_page((unsigned long) priv->sndbuf);
+	kfree(priv);
+
+	return rc;
+}
+
+/**
+ * hvc_iucv_destroy() - Destroy and free hvc_iucv_private instances
+ */
+static void __init hvc_iucv_destroy(struct hvc_iucv_private *priv)
+{
+	hvc_remove(priv->hvc);
+	device_unregister(priv->dev);
+	free_page((unsigned long) priv->sndbuf);
+	kfree(priv);
 }
 
 /**
@@ -1109,6 +1223,11 @@ static int __init hvc_iucv_init(void)
 		goto out_error;
 	}
 
+	/* register IUCV HVC device driver */
+	rc = driver_register(&hvc_iucv_driver);
+	if (rc)
+		goto out_error;
+
 	/* parse hvc_iucv_allow string and create z/VM user ID filter list */
 	if (hvc_iucv_filter_string) {
 		rc = hvc_iucv_setup_filter(hvc_iucv_filter_string);
@@ -1183,15 +1302,14 @@ out_error_iucv:
 	iucv_unregister(&hvc_iucv_handler, 0);
 out_error_hvc:
 	for (i = 0; i < hvc_iucv_devices; i++)
-		if (hvc_iucv_table[i]) {
-			if (hvc_iucv_table[i]->hvc)
-				hvc_remove(hvc_iucv_table[i]->hvc);
-			kfree(hvc_iucv_table[i]);
-		}
+		if (hvc_iucv_table[i])
+			hvc_iucv_destroy(hvc_iucv_table[i]);
 out_error_memory:
 	mempool_destroy(hvc_iucv_mempool);
 	kmem_cache_destroy(hvc_iucv_buffer_cache);
 out_error:
+	if (hvc_iucv_filter)
+		kfree(hvc_iucv_filter);
 	hvc_iucv_devices = 0; /* ensure that we do not provide any device */
 	return rc;
 }
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index c76bccf5354..7d64e4230e6 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -347,7 +347,7 @@ static void __exit hvcs_module_exit(void);
 
 static inline struct hvcs_struct *from_vio_dev(struct vio_dev *viod)
 {
-	return viod->dev.driver_data;
+	return dev_get_drvdata(&viod->dev);
 }
 /* The sysfs interface for the driver and devices */
 
@@ -785,7 +785,7 @@ static int __devinit hvcs_probe(
 	kref_init(&hvcsd->kref);
 
 	hvcsd->vdev = dev;
-	dev->dev.driver_data = hvcsd;
+	dev_set_drvdata(&dev->dev, hvcsd);
 
 	hvcsd->index = index;
 
@@ -831,7 +831,7 @@ static int __devinit hvcs_probe(
 
 static int __devexit hvcs_remove(struct vio_dev *dev)
 {
-	struct hvcs_struct *hvcsd = dev->dev.driver_data;
+	struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
 	unsigned long flags;
 	struct tty_struct *tty;
 
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 9c00440dcf8..f4b3f7293fe 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -148,3 +148,15 @@ config HW_RANDOM_VIRTIO
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called virtio-rng.  If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+	tristate "Freescale i.MX RNGA Random Number Generator"
+	depends on HW_RANDOM && ARCH_HAS_RNGA
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on Freescale i.MX processors.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mxc-rnga.
+
+	  If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e81d21a5f28..fd1ecd2f673 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
 obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
 obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index e5d583c84e4..fc93e2fc7c7 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -153,6 +153,7 @@ static const struct file_operations rng_chrdev_ops = {
 static struct miscdevice rng_miscdev = {
 	.minor		= RNG_MISCDEV_MINOR,
 	.name		= RNG_MODULE_NAME,
+	.devnode	= "hwrng",
 	.fops		= &rng_chrdev_ops,
 };
 
diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c
new file mode 100644
index 00000000000..187c6be80f4
--- /dev/null
+++ b/drivers/char/hw_random/mxc-rnga.c
@@ -0,0 +1,247 @@
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL			0x00
+#define RNGA_STATUS			0x04
+#define RNGA_ENTROPY			0x08
+#define RNGA_OUTPUT_FIFO		0x0c
+#define RNGA_MODE			0x10
+#define RNGA_VERIFICATION_CONTROL	0x14
+#define RNGA_OSC_CONTROL_COUNTER	0x18
+#define RNGA_OSC1_COUNTER		0x1c
+#define RNGA_OSC2_COUNTER		0x20
+#define RNGA_OSC_COUNTER_STATUS		0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE			0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP		0x00000010
+#define RNGA_CONTROL_CLEAR_INT		0x00000008
+#define RNGA_CONTROL_MASK_INTS		0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE	0x00000002
+#define RNGA_CONTROL_GO			0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK		0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD		0x80000000
+#define RNGA_STATUS_SLEEP		0x00000010
+#define RNGA_STATUS_ERROR_INT		0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW	0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS	0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION	0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+	int level;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* how many random numbers is in FIFO? [0-16] */
+	level = ((__raw_readl(rng_base + RNGA_STATUS) &
+			RNGA_STATUS_LEVEL_MASK) >> 8);
+
+	return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+	int err;
+	u32 ctrl;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* retrieve a random number from FIFO */
+	*data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+	/* some error while reading this random number? */
+	err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+	/* if error: clear error interrupt, but doesn't return random number */
+	if (err) {
+		dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+		ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+		__raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+					rng_base + RNGA_CONTROL);
+		return 0;
+	} else
+		return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+	u32 ctrl, osc;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	/* wake up */
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+	__raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+	/* verify if oscillator is working */
+	osc = __raw_readl(rng_base + RNGA_STATUS);
+	if (osc & RNGA_STATUS_OSC_DEAD) {
+		dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+		return -ENODEV;
+	}
+
+	/* go running */
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+	__raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+	return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+	u32 ctrl;
+	void __iomem *rng_base = (void __iomem *)rng->priv;
+
+	ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+	/* stop rnga */
+	__raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+	.name = "mxc-rnga",
+	.init = mxc_rnga_init,
+	.cleanup = mxc_rnga_cleanup,
+	.data_present = mxc_rnga_data_present,
+	.data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+	int err = -ENODEV;
+	struct clk *clk;
+	struct resource *res, *mem;
+	void __iomem *rng_base = NULL;
+
+	if (rng_dev)
+		return -EBUSY;
+
+	clk = clk_get(&pdev->dev, "rng");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Could not get rng_clk!\n");
+		err = PTR_ERR(clk);
+		goto out;
+	}
+
+	clk_enable(clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENOENT;
+		goto err_region;
+	}
+
+	mem = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (mem == NULL) {
+		err = -EBUSY;
+		goto err_region;
+	}
+
+	rng_base = ioremap(res->start, resource_size(res));
+	if (!rng_base) {
+		err = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	mxc_rnga.priv = (unsigned long)rng_base;
+
+	err = hwrng_register(&mxc_rnga);
+	if (err) {
+		dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+		goto err_register;
+	}
+
+	rng_dev = pdev;
+
+	dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+	return 0;
+
+err_register:
+	iounmap(rng_base);
+	rng_base = NULL;
+
+err_ioremap:
+	release_mem_region(res->start, resource_size(res));
+
+err_region:
+	clk_disable(clk);
+	clk_put(clk);
+
+out:
+	return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+	struct clk *clk = clk_get(&pdev->dev, "rng");
+
+	hwrng_unregister(&mxc_rnga);
+
+	iounmap(rng_base);
+
+	release_mem_region(res->start, resource_size(res));
+
+	clk_disable(clk);
+	clk_put(clk);
+
+	return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+	.driver = {
+		   .name = "mxc_rnga",
+		   .owner = THIS_MODULE,
+		   },
+	.remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+	return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+	platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 259644646b8..d2e698096ac 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2375,14 +2375,14 @@ static int __devinit ipmi_of_probe(struct of_device *dev,
 		info->io.addr_data, info->io.regsize, info->io.regspacing,
 		info->irq);
 
-	dev->dev.driver_data = (void *) info;
+	dev_set_drvdata(&dev->dev, info);
 
 	return try_smi_init(info);
 }
 
 static int __devexit ipmi_of_remove(struct of_device *dev)
 {
-	cleanup_one_si(dev->dev.driver_data);
+	cleanup_one_si(dev_get_drvdata(&dev->dev));
 	return 0;
 }
 
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index a5e0db9d766..62c99fa59e2 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -168,7 +168,6 @@ static const struct file_operations misc_fops = {
 	.open		= misc_open,
 };
 
-
 /**
  *	misc_register	-	register a miscellaneous device
  *	@misc: device structure
@@ -217,8 +216,8 @@ int misc_register(struct miscdevice * misc)
 		misc_minors[misc->minor >> 3] |= 1 << (misc->minor & 7);
 	dev = MKDEV(MISC_MAJOR, misc->minor);
 
-	misc->this_device = device_create(misc_class, misc->parent, dev, NULL,
-					  "%s", misc->name);
+	misc->this_device = device_create(misc_class, misc->parent, dev,
+					  misc, "%s", misc->name);
 	if (IS_ERR(misc->this_device)) {
 		err = PTR_ERR(misc->this_device);
 		goto out;
@@ -264,6 +263,15 @@ int misc_deregister(struct miscdevice *misc)
 EXPORT_SYMBOL(misc_register);
 EXPORT_SYMBOL(misc_deregister);
 
+static char *misc_nodename(struct device *dev)
+{
+	struct miscdevice *c = dev_get_drvdata(dev);
+
+	if (c->devnode)
+		return kstrdup(c->devnode, GFP_KERNEL);
+	return NULL;
+}
+
 static int __init misc_init(void)
 {
 	int err;
@@ -279,6 +287,7 @@ static int __init misc_init(void)
 	err = -EIO;
 	if (register_chrdev(MISC_MAJOR,"misc",&misc_fops))
 		goto fail_printk;
+	misc_class->nodename = misc_nodename;
 	return 0;
 
 fail_printk:
diff --git a/drivers/char/ps3flash.c b/drivers/char/ps3flash.c
index afbe45676d7..f424d394a28 100644
--- a/drivers/char/ps3flash.c
+++ b/drivers/char/ps3flash.c
@@ -33,48 +33,64 @@
 
 struct ps3flash_private {
 	struct mutex mutex;	/* Bounce buffer mutex */
+	u64 chunk_sectors;
+	int tag;		/* Start sector of buffer, -1 if invalid */
+	bool dirty;
 };
 
 static struct ps3_storage_device *ps3flash_dev;
 
-static ssize_t ps3flash_read_write_sectors(struct ps3_storage_device *dev,
-					   u64 lpar, u64 start_sector,
-					   u64 sectors, int write)
+static int ps3flash_read_write_sectors(struct ps3_storage_device *dev,
+				       u64 start_sector, int write)
 {
-	u64 res = ps3stor_read_write_sectors(dev, lpar, start_sector, sectors,
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	u64 res = ps3stor_read_write_sectors(dev, dev->bounce_lpar,
+					     start_sector, priv->chunk_sectors,
 					     write);
 	if (res) {
 		dev_err(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
 			__LINE__, write ? "write" : "read", res);
 		return -EIO;
 	}
-	return sectors;
+	return 0;
 }
 
-static ssize_t ps3flash_read_sectors(struct ps3_storage_device *dev,
-				     u64 start_sector, u64 sectors,
-				     unsigned int sector_offset)
+static int ps3flash_writeback(struct ps3_storage_device *dev)
 {
-	u64 max_sectors, lpar;
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	int res;
 
-	max_sectors = dev->bounce_size / dev->blk_size;
-	if (sectors > max_sectors) {
-		dev_dbg(&dev->sbd.core, "%s:%u Limiting sectors to %llu\n",
-			__func__, __LINE__, max_sectors);
-		sectors = max_sectors;
-	}
+	if (!priv->dirty || priv->tag < 0)
+		return 0;
 
-	lpar = dev->bounce_lpar + sector_offset * dev->blk_size;
-	return ps3flash_read_write_sectors(dev, lpar, start_sector, sectors,
-					   0);
+	res = ps3flash_read_write_sectors(dev, priv->tag, 1);
+	if (res)
+		return res;
+
+	priv->dirty = false;
+	return 0;
 }
 
-static ssize_t ps3flash_write_chunk(struct ps3_storage_device *dev,
-				    u64 start_sector)
+static int ps3flash_fetch(struct ps3_storage_device *dev, u64 start_sector)
 {
-       u64 sectors = dev->bounce_size / dev->blk_size;
-       return ps3flash_read_write_sectors(dev, dev->bounce_lpar, start_sector,
-					  sectors, 1);
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	int res;
+
+	if (start_sector == priv->tag)
+		return 0;
+
+	res = ps3flash_writeback(dev);
+	if (res)
+		return res;
+
+	priv->tag = -1;
+
+	res = ps3flash_read_write_sectors(dev, start_sector, 0);
+	if (res)
+		return res;
+
+	priv->tag = start_sector;
+	return 0;
 }
 
 static loff_t ps3flash_llseek(struct file *file, loff_t offset, int origin)
@@ -104,18 +120,19 @@ out:
 	return res;
 }
 
-static ssize_t ps3flash_read(struct file *file, char __user *buf, size_t count,
-			     loff_t *pos)
+static ssize_t ps3flash_read(char __user *userbuf, void *kernelbuf,
+			     size_t count, loff_t *pos)
 {
 	struct ps3_storage_device *dev = ps3flash_dev;
-	struct ps3flash_private *priv = dev->sbd.core.driver_data;
-	u64 size, start_sector, end_sector, offset;
-	ssize_t sectors_read;
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	u64 size, sector, offset;
+	int res;
 	size_t remaining, n;
+	const void *src;
 
 	dev_dbg(&dev->sbd.core,
-		"%s:%u: Reading %zu bytes at position %lld to user 0x%p\n",
-		__func__, __LINE__, count, *pos, buf);
+		"%s:%u: Reading %zu bytes at position %lld to U0x%p/K0x%p\n",
+		__func__, __LINE__, count, *pos, userbuf, kernelbuf);
 
 	size = dev->regions[dev->region_idx].size*dev->blk_size;
 	if (*pos >= size || !count)
@@ -128,61 +145,63 @@ static ssize_t ps3flash_read(struct file *file, char __user *buf, size_t count,
 		count = size - *pos;
 	}
 
-	start_sector = *pos / dev->blk_size;
-	offset = *pos % dev->blk_size;
-	end_sector = DIV_ROUND_UP(*pos + count, dev->blk_size);
+	sector = *pos / dev->bounce_size * priv->chunk_sectors;
+	offset = *pos % dev->bounce_size;
 
 	remaining = count;
 	do {
+		n = min_t(u64, remaining, dev->bounce_size - offset);
+		src = dev->bounce_buf + offset;
+
 		mutex_lock(&priv->mutex);
 
-		sectors_read = ps3flash_read_sectors(dev, start_sector,
-						     end_sector-start_sector,
-						     0);
-		if (sectors_read < 0) {
-			mutex_unlock(&priv->mutex);
+		res = ps3flash_fetch(dev, sector);
+		if (res)
 			goto fail;
-		}
 
-		n = min_t(u64, remaining, sectors_read*dev->blk_size-offset);
 		dev_dbg(&dev->sbd.core,
-			"%s:%u: copy %lu bytes from 0x%p to user 0x%p\n",
-			__func__, __LINE__, n, dev->bounce_buf+offset, buf);
-		if (copy_to_user(buf, dev->bounce_buf+offset, n)) {
-			mutex_unlock(&priv->mutex);
-			sectors_read = -EFAULT;
-			goto fail;
+			"%s:%u: copy %lu bytes from 0x%p to U0x%p/K0x%p\n",
+			__func__, __LINE__, n, src, userbuf, kernelbuf);
+		if (userbuf) {
+			if (copy_to_user(userbuf, src, n)) {
+				res = -EFAULT;
+				goto fail;
+			}
+			userbuf += n;
+		}
+		if (kernelbuf) {
+			memcpy(kernelbuf, src, n);
+			kernelbuf += n;
 		}
 
 		mutex_unlock(&priv->mutex);
 
 		*pos += n;
-		buf += n;
 		remaining -= n;
-		start_sector += sectors_read;
+		sector += priv->chunk_sectors;
 		offset = 0;
 	} while (remaining > 0);
 
 	return count;
 
 fail:
-	return sectors_read;
+	mutex_unlock(&priv->mutex);
+	return res;
 }
 
-static ssize_t ps3flash_write(struct file *file, const char __user *buf,
-			      size_t count, loff_t *pos)
+static ssize_t ps3flash_write(const char __user *userbuf,
+			      const void *kernelbuf, size_t count, loff_t *pos)
 {
 	struct ps3_storage_device *dev = ps3flash_dev;
-	struct ps3flash_private *priv = dev->sbd.core.driver_data;
-	u64 size, chunk_sectors, start_write_sector, end_write_sector,
-	    end_read_sector, start_read_sector, head, tail, offset;
-	ssize_t res;
+	struct ps3flash_private *priv = ps3_system_bus_get_drvdata(&dev->sbd);
+	u64 size, sector, offset;
+	int res = 0;
 	size_t remaining, n;
-	unsigned int sec_off;
+	void *dst;
 
 	dev_dbg(&dev->sbd.core,
-		"%s:%u: Writing %zu bytes at position %lld from user 0x%p\n",
-		__func__, __LINE__, count, *pos, buf);
+		"%s:%u: Writing %zu bytes at position %lld from U0x%p/K0x%p\n",
+		__func__, __LINE__, count, *pos, userbuf, kernelbuf);
 
 	size = dev->regions[dev->region_idx].size*dev->blk_size;
 	if (*pos >= size || !count)
@@ -195,89 +214,46 @@ static ssize_t ps3flash_write(struct file *file, const char __user *buf,
 		count = size - *pos;
 	}
 
-	chunk_sectors = dev->bounce_size / dev->blk_size;
-
-	start_write_sector = *pos / dev->bounce_size * chunk_sectors;
+	sector = *pos / dev->bounce_size * priv->chunk_sectors;
 	offset = *pos % dev->bounce_size;
-	end_write_sector = DIV_ROUND_UP(*pos + count, dev->bounce_size) *
-			   chunk_sectors;
-
-	end_read_sector = DIV_ROUND_UP(*pos, dev->blk_size);
-	start_read_sector = (*pos + count) / dev->blk_size;
-
-	/*
-	 * As we have to write in 256 KiB chunks, while we can read in blk_size
-	 * (usually 512 bytes) chunks, we perform the following steps:
-	 *   1. Read from start_write_sector to end_read_sector ("head")
-	 *   2. Read from start_read_sector to end_write_sector ("tail")
-	 *   3. Copy data to buffer
-	 *   4. Write from start_write_sector to end_write_sector
-	 * All of this is complicated by using only one 256 KiB bounce buffer.
-	 */
-
-	head = end_read_sector - start_write_sector;
-	tail = end_write_sector - start_read_sector;
 
 	remaining = count;
 	do {
+		n = min_t(u64, remaining, dev->bounce_size - offset);
+		dst = dev->bounce_buf + offset;
+
 		mutex_lock(&priv->mutex);
 
-		if (end_read_sector >= start_read_sector) {
-			/* Merge head and tail */
-			dev_dbg(&dev->sbd.core,
-				"Merged head and tail: %llu sectors at %llu\n",
-				chunk_sectors, start_write_sector);
-			res = ps3flash_read_sectors(dev, start_write_sector,
-						    chunk_sectors, 0);
-			if (res < 0)
+		if (n != dev->bounce_size)
+			res = ps3flash_fetch(dev, sector);
+		else if (sector != priv->tag)
+			res = ps3flash_writeback(dev);
+		if (res)
+			goto fail;
+
+		dev_dbg(&dev->sbd.core,
+			"%s:%u: copy %lu bytes from U0x%p/K0x%p to 0x%p\n",
+			__func__, __LINE__, n, userbuf, kernelbuf, dst);
+		if (userbuf) {
+			if (copy_from_user(dst, userbuf, n)) {
+				res = -EFAULT;
 				goto fail;
-		} else {
-			if (head) {
-				/* Read head */
-				dev_dbg(&dev->sbd.core,
-					"head: %llu sectors at %llu\n", head,
-					start_write_sector);
-				res = ps3flash_read_sectors(dev,
-							    start_write_sector,
-							    head, 0);
-				if (res < 0)
-					goto fail;
-			}
-			if (start_read_sector <
-			    start_write_sector+chunk_sectors) {
-				/* Read tail */
-				dev_dbg(&dev->sbd.core,
-					"tail: %llu sectors at %llu\n", tail,
-					start_read_sector);
-				sec_off = start_read_sector-start_write_sector;
-				res = ps3flash_read_sectors(dev,
-							    start_read_sector,
-							    tail, sec_off);
-				if (res < 0)
-					goto fail;
 			}
+			userbuf += n;
 		}
-
-		n = min_t(u64, remaining, dev->bounce_size-offset);
-		dev_dbg(&dev->sbd.core,
-			"%s:%u: copy %lu bytes from user 0x%p to 0x%p\n",
-			__func__, __LINE__, n, buf, dev->bounce_buf+offset);
-		if (copy_from_user(dev->bounce_buf+offset, buf, n)) {
-			res = -EFAULT;
-			goto fail;
+		if (kernelbuf) {
+			memcpy(dst, kernelbuf, n);
+			kernelbuf += n;
 		}
 
-		res = ps3flash_write_chunk(dev, start_write_sector);
-		if (res < 0)
-			goto fail;
+		priv->tag = sector;
+		priv->dirty = true;
 
 		mutex_unlock(&priv->mutex);
 
 		*pos += n;
-		buf += n;
 		remaining -= n;
-		start_write_sector += chunk_sectors;
-		head = 0;
+		sector += priv->chunk_sectors;
 		offset = 0;
 	} while (remaining > 0);
 
@@ -288,6 +264,51 @@ fail:
 	return res;
 }
 
+static ssize_t ps3flash_user_read(struct file *file, char __user *buf,
+				  size_t count, loff_t *pos)
+{
+	return ps3flash_read(buf, NULL, count, pos);
+}
+
+static ssize_t ps3flash_user_write(struct file *file, const char __user *buf,
+				   size_t count, loff_t *pos)
+{
+	return ps3flash_write(buf, NULL, count, pos);
+}
+
+static ssize_t ps3flash_kernel_read(void *buf, size_t count, loff_t pos)
+{
+	return ps3flash_read(NULL, buf, count, &pos);
+}
+
+static ssize_t ps3flash_kernel_write(const void *buf, size_t count,
+				     loff_t pos)
+{
+	ssize_t res;
+	int wb;
+
+	res = ps3flash_write(NULL, buf, count, &pos);
+	if (res < 0)
+		return res;
+
+	/* Make kernel writes synchronous */
+	wb = ps3flash_writeback(ps3flash_dev);
+	if (wb)
+		return wb;
+
+	return res;
+}
+
+static int ps3flash_flush(struct file *file, fl_owner_t id)
+{
+	return ps3flash_writeback(ps3flash_dev);
+}
+
+static int ps3flash_fsync(struct file *file, struct dentry *dentry,
+			  int datasync)
+{
+	return ps3flash_writeback(ps3flash_dev);
+}
 
 static irqreturn_t ps3flash_interrupt(int irq, void *data)
 {
@@ -312,12 +333,18 @@ static irqreturn_t ps3flash_interrupt(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-
 static const struct file_operations ps3flash_fops = {
 	.owner	= THIS_MODULE,
 	.llseek	= ps3flash_llseek,
-	.read	= ps3flash_read,
-	.write	= ps3flash_write,
+	.read	= ps3flash_user_read,
+	.write	= ps3flash_user_write,
+	.flush	= ps3flash_flush,
+	.fsync	= ps3flash_fsync,
+};
+
+static const struct ps3_os_area_flash_ops ps3flash_kernel_ops = {
+	.read	= ps3flash_kernel_read,
+	.write	= ps3flash_kernel_write,
 };
 
 static struct miscdevice ps3flash_misc = {
@@ -366,11 +393,13 @@ static int __devinit ps3flash_probe(struct ps3_system_bus_device *_dev)
 		goto fail;
 	}
 
-	dev->sbd.core.driver_data = priv;
+	ps3_system_bus_set_drvdata(&dev->sbd, priv);
 	mutex_init(&priv->mutex);
+	priv->tag = -1;
 
 	dev->bounce_size = ps3flash_bounce_buffer.size;
 	dev->bounce_buf = ps3flash_bounce_buffer.address;
+	priv->chunk_sectors = dev->bounce_size / dev->blk_size;
 
 	error = ps3stor_setup(dev, ps3flash_interrupt);
 	if (error)
@@ -386,13 +415,15 @@ static int __devinit ps3flash_probe(struct ps3_system_bus_device *_dev)
 
 	dev_info(&dev->sbd.core, "%s:%u: registered misc device %d\n",
 		 __func__, __LINE__, ps3flash_misc.minor);
+
+	ps3_os_area_flash_register(&ps3flash_kernel_ops);
 	return 0;
 
 fail_teardown:
 	ps3stor_teardown(dev);
 fail_free_priv:
 	kfree(priv);
-	dev->sbd.core.driver_data = NULL;
+	ps3_system_bus_set_drvdata(&dev->sbd, NULL);
 fail:
 	ps3flash_dev = NULL;
 	return error;
@@ -402,10 +433,11 @@ static int ps3flash_remove(struct ps3_system_bus_device *_dev)
 {
 	struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
 
+	ps3_os_area_flash_register(NULL);
 	misc_deregister(&ps3flash_misc);
 	ps3stor_teardown(dev);
-	kfree(dev->sbd.core.driver_data);
-	dev->sbd.core.driver_data = NULL;
+	kfree(ps3_system_bus_get_drvdata(&dev->sbd));
+	ps3_system_bus_set_drvdata(&dev->sbd, NULL);
 	ps3flash_dev = NULL;
 	return 0;
 }
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 5acd29e6e04..daebe1ba43d 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -95,23 +95,34 @@ static void pty_unthrottle(struct tty_struct *tty)
  * a count.
  *
  * FIXME: Our pty_write method is called with our ldisc lock held but
- * not our partners. We can't just take the other one blindly without
- * risking deadlocks.
+ * not our partners. We can't just wait on the other one blindly without
+ * risking deadlocks. At some point when everything has settled down we need
+ * to look into making pty_write at least able to sleep over an ldisc change.
+ *
+ * The return on no ldisc is a bit counter intuitive but the logic works
+ * like this. During an ldisc change the other end will flush its buffers. We
+ * thus return the full length which is identical to the case where we had
+ * proper locking and happened to queue the bytes just before the flush during
+ * the ldisc change.
  */
 static int pty_write(struct tty_struct *tty, const unsigned char *buf,
 								int count)
 {
 	struct tty_struct *to = tty->link;
-	int	c;
+	struct tty_ldisc *ld;
+	int c = count;
 
 	if (!to || tty->stopped)
 		return 0;
-
-	c = to->receive_room;
-	if (c > count)
-		c = count;
-	to->ldisc->ops->receive_buf(to, buf, NULL, c);
-
+	ld = tty_ldisc_ref(to);
+
+	if (ld) {
+		c = to->receive_room;
+		if (c > count)
+			c = count;
+		ld->ops->receive_buf(to, buf, NULL, c);
+		tty_ldisc_deref(ld);
+	}
 	return c;
 }
 
@@ -145,14 +156,23 @@ static int pty_write_room(struct tty_struct *tty)
 static int pty_chars_in_buffer(struct tty_struct *tty)
 {
 	struct tty_struct *to = tty->link;
-	int count;
+	struct tty_ldisc *ld;
+	int count = 0;
 
 	/* We should get the line discipline lock for "tty->link" */
-	if (!to || !to->ldisc->ops->chars_in_buffer)
+	if (!to)
+		return 0;
+	/* We cannot take a sleeping reference here without deadlocking with
+	   an ldisc change - but it doesn't really matter */
+	ld = tty_ldisc_ref(to);
+	if (ld == NULL)
 		return 0;
 
 	/* The ldisc must report 0 if no characters available to be read */
-	count = to->ldisc->ops->chars_in_buffer(to);
+	if (ld->ops->chars_in_buffer)
+		count = ld->ops->chars_in_buffer(to);
+
+	tty_ldisc_deref(ld);
 
 	if (tty->driver->subtype == PTY_TYPE_SLAVE)
 		return count;
@@ -182,12 +202,19 @@ static void pty_flush_buffer(struct tty_struct *tty)
 {
 	struct tty_struct *to = tty->link;
 	unsigned long flags;
+	struct tty_ldisc *ld;
 
 	if (!to)
 		return;
+	ld = tty_ldisc_ref(to);
+
+	/* The other end is changing discipline */
+	if (!ld)
+		return;
 
-	if (to->ldisc->ops->flush_buffer)
+	if (ld->ops->flush_buffer)
 		to->ldisc->ops->flush_buffer(to);
+	tty_ldisc_deref(ld);
 
 	if (to->packet) {
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index db32f0e4c7d..05f9d18b936 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -261,6 +261,11 @@ static const struct file_operations raw_ctl_fops = {
 
 static struct cdev raw_cdev;
 
+static char *raw_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "raw/%s", dev_name(dev));
+}
+
 static int __init raw_init(void)
 {
 	dev_t dev = MKDEV(RAW_MAJOR, 0);
@@ -284,6 +289,7 @@ static int __init raw_init(void)
 		ret = PTR_ERR(raw_class);
 		goto error_region;
 	}
+	raw_class->nodename = raw_nodename;
 	device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl");
 
 	return 0;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 939e198d767..a3afa0c387c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1263,7 +1263,9 @@ static int tty_reopen(struct tty_struct *tty)
 	tty->count++;
 	tty->driver = driver; /* N.B. why do this every time?? */
 
+	mutex_lock(&tty->ldisc_mutex);
 	WARN_ON(!test_bit(TTY_LDISC, &tty->flags));
+	mutex_unlock(&tty->ldisc_mutex);
 
 	return 0;
 }
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 8116bb1c8f8..b24f6c6a1ea 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -947,7 +947,6 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 	void __user *p = (void __user *)arg;
 	int ret = 0;
 	struct ktermios kterm;
-	struct termiox ktermx;
 
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
@@ -1049,7 +1048,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return ret;
 #endif
 #ifdef TCGETX
-	case TCGETX:
+	case TCGETX: {
+		struct termiox ktermx;
 		if (real_tty->termiox == NULL)
 			return -EINVAL;
 		mutex_lock(&real_tty->termios_mutex);
@@ -1058,6 +1058,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		if (copy_to_user(p, &ktermx, sizeof(struct termiox)))
 			ret = -EFAULT;
 		return ret;
+	}
 	case TCSETX:
 		return set_termiox(real_tty, p, 0);
 	case TCSETXW:
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 39c8f86dedd..a19e935847b 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -148,8 +148,10 @@ static struct tty_ldisc *tty_ldisc_try_get(int disc)
 		}
 	}
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	if (err)
+	if (err) {
+		kfree(ld);
 		return ERR_PTR(err);
+	}
 	return ld;
 }
 
@@ -205,6 +207,7 @@ static void tty_ldisc_put(struct tty_ldisc *ld)
 	ldo->refcount--;
 	module_put(ldo->owner);
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	WARN_ON(ld->refcount);
 	kfree(ld);
 }
 
@@ -262,7 +265,7 @@ const struct file_operations tty_ldiscs_proc_fops = {
  *	@ld: line discipline
  *
  *	Install an instance of a line discipline into a tty structure. The
- *	ldisc must have a reference count above zero to ensure it remains/
+ *	ldisc must have a reference count above zero to ensure it remains.
  *	The tty instance refcount starts at zero.
  *
  *	Locking:
@@ -791,6 +794,8 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 		/* Avoid racing set_ldisc */
 		mutex_lock(&tty->ldisc_mutex);
 		/* Switch back to N_TTY */
+		tty_ldisc_halt(tty);
+		tty_ldisc_wait_idle(tty);
 		tty_ldisc_reinit(tty);
 		/* At this point we have a closed ldisc and we want to
 		   reopen it. We could defer this to the next open but
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index ffc9254f7e0..042c8149a6d 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -867,7 +867,7 @@ static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	int j;
 	struct device_node *node = vdev->dev.archdata.of_node;
 
-	if (i > VIOTAPE_MAX_TAPE)
+	if (i >= VIOTAPE_MAX_TAPE)
 		return -ENODEV;
 	if (!node)
 		return -ENODEV;
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index c796a86ab7f..d9113b4c76e 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -171,8 +171,9 @@ int do_poke_blanked_console;
 int console_blanked;
 
 static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */
-static int blankinterval = 10*60*HZ;
 static int vesa_off_interval;
+static int blankinterval = 10*60;
+core_param(consoleblank, blankinterval, int, 0444);
 
 static DECLARE_WORK(console_work, console_callback);
 
@@ -1485,7 +1486,7 @@ static void setterm_command(struct vc_data *vc)
 			update_attr(vc);
 			break;
 		case 9:	/* set blanking interval */
-			blankinterval = ((vc->vc_par[1] < 60) ? vc->vc_par[1] : 60) * 60 * HZ;
+			blankinterval = ((vc->vc_par[1] < 60) ? vc->vc_par[1] : 60) * 60;
 			poke_blanked_console();
 			break;
 		case 10: /* set bell frequency in Hz */
@@ -2871,7 +2872,7 @@ static int __init con_init(void)
 
 	if (blankinterval) {
 		blank_state = blank_normal_wait;
-		mod_timer(&console_timer, jiffies + blankinterval);
+		mod_timer(&console_timer, jiffies + (blankinterval * HZ));
 	}
 
 	for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) {
@@ -3677,7 +3678,7 @@ void do_unblank_screen(int leaving_gfx)
 		return; /* but leave console_blanked != 0 */
 
 	if (blankinterval) {
-		mod_timer(&console_timer, jiffies + blankinterval);
+		mod_timer(&console_timer, jiffies + (blankinterval * HZ));
 		blank_state = blank_normal_wait;
 	}
 
@@ -3711,7 +3712,7 @@ void unblank_screen(void)
 static void blank_screen_t(unsigned long dummy)
 {
 	if (unlikely(!keventd_up())) {
-		mod_timer(&console_timer, jiffies + blankinterval);
+		mod_timer(&console_timer, jiffies + (blankinterval * HZ));
 		return;
 	}
 	blank_timer_expired = 1;
@@ -3741,7 +3742,7 @@ void poke_blanked_console(void)
 	if (console_blanked)
 		unblank_screen();
 	else if (blankinterval) {
-		mod_timer(&console_timer, jiffies + blankinterval);
+		mod_timer(&console_timer, jiffies + (blankinterval * HZ));
 		blank_state = blank_normal_wait;
 	}
 }
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 40bd8c61c7d..72a633a6ec9 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -18,6 +18,7 @@
 
 #include <linux/acpi_pmtmr.h>
 #include <linux/clocksource.h>
+#include <linux/timex.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/pci.h>
diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig
index 100bfd42206..6e6730f9dfd 100644
--- a/drivers/connector/Kconfig
+++ b/drivers/connector/Kconfig
@@ -7,7 +7,7 @@ menuconfig CONNECTOR
 	  of the netlink socket protocol.
 
 	  Connector support can also be built as a module.  If so, the module
-	  will be called cn.ko.
+	  will be called cn.
 
 if CONNECTOR
 
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index e748e55bd86..5b27692372b 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -34,7 +34,7 @@ config CRYPTO_DEV_PADLOCK_AES
 	  Available in VIA C3 and newer CPUs.
 
 	  If unsure say M. The compiled module will be
-	  called padlock-aes.ko
+	  called padlock-aes.
 
 config CRYPTO_DEV_PADLOCK_SHA
 	tristate "PadLock driver for SHA1 and SHA256 algorithms"
@@ -47,7 +47,7 @@ config CRYPTO_DEV_PADLOCK_SHA
 	  Available in VIA C7 and newer processors.
 
 	  If unsure say M. The compiled module will be
-	  called padlock-sha.ko
+	  called padlock-sha.
 
 config CRYPTO_DEV_GEODE
 	tristate "Support for the Geode LX AES engine"
@@ -79,7 +79,7 @@ config ZCRYPT_MONOLITHIC
 	bool "Monolithic zcrypt module"
 	depends on ZCRYPT="m"
 	help
-	  Select this option if you want to have a single module z90crypt.ko
+	  Select this option if you want to have a single module z90crypt,
 	  that contains all parts of the crypto device driver (ap bus,
 	  request router and all the card drivers).
 
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index facfdb1fa71..d205d493a68 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1084,7 +1084,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 	struct pci_dev *dev = pvt->dev_d0f1;
 	int enable = 1;
 
-	/* Allow module paramter override, else see if CPU supports parity */
+	/* Allow module parameter override, else see if CPU supports parity */
 	if (sysbus_parity != -1) {
 		enable = sysbus_parity;
 	} else if (cpu_id[0] &&
diff --git a/drivers/eisa/eisa.ids b/drivers/eisa/eisa.ids
index ed69837d8b7..6cbb7a51443 100644
--- a/drivers/eisa/eisa.ids
+++ b/drivers/eisa/eisa.ids
@@ -1140,6 +1140,11 @@ NON0301 "c't Universale Graphic Adapter"
 NON0401 "c't Universal Ethernet Adapter"
 NON0501 "c't Universal 16-Bit Sound Adapter"
 NON0601 "c't Universal 8-Bit Adapter"
+NPI0120 "Network Peripherals NP-EISA-1 FDDI Interface"
+NPI0221 "Network Peripherals NP-EISA-2 FDDI Interface"
+NPI0223 "Network Peripherals NP-EISA-2E Enhanced FDDI Interface"
+NPI0301 "Network Peripherals NP-EISA-3 FDDI Interface"
+NPI0303 "Network Peripherals NP-EISA-3E Enhanced FDDI Interface"
 NSS0011 "Newport Systems Solutions WNIC Adapter"
 NVL0701 "Novell NE3200 Bus Master Ethernet"
 NVL0702 "Novell NE3200T Bus Master Ethernet"
diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c
index 74edb1d0110..0dd0f633b18 100644
--- a/drivers/eisa/pci_eisa.c
+++ b/drivers/eisa/pci_eisa.c
@@ -31,11 +31,11 @@ static int __init pci_eisa_init(struct pci_dev *pdev,
 	}
 
 	pci_eisa_root.dev              = &pdev->dev;
-	pci_eisa_root.dev->driver_data = &pci_eisa_root;
 	pci_eisa_root.res	       = pdev->bus->resource[0];
 	pci_eisa_root.bus_base_addr    = pdev->bus->resource[0]->start;
 	pci_eisa_root.slots	       = EISA_MAX_SLOTS;
 	pci_eisa_root.dma_mask         = pdev->dma_mask;
+	dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
 
 	if (eisa_root_register (&pci_eisa_root)) {
 		printk (KERN_ERR "pci_eisa : Could not register EISA root\n");
diff --git a/drivers/eisa/virtual_root.c b/drivers/eisa/virtual_root.c
index 3074879f231..535e4f9c83f 100644
--- a/drivers/eisa/virtual_root.c
+++ b/drivers/eisa/virtual_root.c
@@ -57,7 +57,7 @@ static int __init virtual_eisa_root_init (void)
 
 	eisa_bus_root.force_probe = force_probe;
 	
-	eisa_root_dev.dev.driver_data = &eisa_bus_root;
+	dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root);
 
 	if (eisa_root_register (&eisa_bus_root)) {
 		/* A real bridge may have been registered before
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index a7c31e9039c..bc3b9bf822b 100644
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -2,10 +2,10 @@
 # Makefile for the Linux IEEE 1394 implementation
 #
 
-firewire-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
-                   fw-device.o fw-cdev.o
-firewire-ohci-y += fw-ohci.o
-firewire-sbp2-y += fw-sbp2.o
+firewire-core-y += core-card.o core-cdev.o core-device.o \
+                   core-iso.o core-topology.o core-transaction.o
+firewire-ohci-y += ohci.o
+firewire-sbp2-y += sbp2.o
 
 obj-$(CONFIG_FIREWIRE) += firewire-core.o
 obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/core-card.c
index 8b8c8c22f0f..4c1be64fddd 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/core-card.c
@@ -16,18 +16,27 @@
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/bug.h>
 #include <linux/completion.h>
 #include <linux/crc-itu-t.h>
-#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/errno.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
 #include <linux/kref.h>
+#include <linux/list.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
 
-#include "fw-transaction.h"
-#include "fw-topology.h"
-#include "fw-device.h"
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
+
+#include "core.h"
 
 int fw_compute_block_crc(u32 *block)
 {
@@ -181,12 +190,6 @@ void fw_core_remove_descriptor(struct fw_descriptor *desc)
 	mutex_unlock(&card_mutex);
 }
 
-static int set_broadcast_channel(struct device *dev, void *data)
-{
-	fw_device_set_broadcast_channel(fw_device(dev), (long)data);
-	return 0;
-}
-
 static void allocate_broadcast_channel(struct fw_card *card, int generation)
 {
 	int channel, bandwidth = 0;
@@ -196,7 +199,7 @@ static void allocate_broadcast_channel(struct fw_card *card, int generation)
 	if (channel == 31) {
 		card->broadcast_channel_allocated = true;
 		device_for_each_child(card->device, (void *)(long)generation,
-				      set_broadcast_channel);
+				      fw_device_set_broadcast_channel);
 	}
 }
 
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/core-cdev.c
index 7eb6594cc3e..d1d30c615b0 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/errno.h>
+#include <linux/firewire.h>
 #include <linux/firewire-cdev.h>
 #include <linux/idr.h>
 #include <linux/jiffies.h>
@@ -34,16 +35,14 @@
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
 #include <linux/time.h>
+#include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
 
-#include "fw-device.h"
-#include "fw-topology.h"
-#include "fw-transaction.h"
+#include "core.h"
 
 struct client {
 	u32 version;
@@ -739,15 +738,11 @@ static void release_descriptor(struct client *client,
 static int ioctl_add_descriptor(struct client *client, void *buffer)
 {
 	struct fw_cdev_add_descriptor *request = buffer;
-	struct fw_card *card = client->device->card;
 	struct descriptor_resource *r;
 	int ret;
 
 	/* Access policy: Allow this ioctl only on local nodes' device files. */
-	spin_lock_irq(&card->lock);
-	ret = client->device->node_id != card->local_node->node_id;
-	spin_unlock_irq(&card->lock);
-	if (ret)
+	if (!client->device->is_local)
 		return -ENOSYS;
 
 	if (request->length > 256)
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/core-device.c
index a47e2129d83..97e656af2d2 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/core-device.c
@@ -22,10 +22,14 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/errno.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
 #include <linux/idr.h>
 #include <linux/jiffies.h>
 #include <linux/kobject.h>
 #include <linux/list.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/rwsem.h>
 #include <linux/semaphore.h>
@@ -33,11 +37,11 @@
 #include <linux/string.h>
 #include <linux/workqueue.h>
 
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
 #include <asm/system.h>
 
-#include "fw-device.h"
-#include "fw-topology.h"
-#include "fw-transaction.h"
+#include "core.h"
 
 void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 * p)
 {
@@ -55,9 +59,10 @@ int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value)
 }
 EXPORT_SYMBOL(fw_csr_iterator_next);
 
-static int is_fw_unit(struct device *dev);
+static bool is_fw_unit(struct device *dev);
 
-static int match_unit_directory(u32 * directory, const struct fw_device_id *id)
+static int match_unit_directory(u32 *directory, u32 match_flags,
+				const struct ieee1394_device_id *id)
 {
 	struct fw_csr_iterator ci;
 	int key, value, match;
@@ -65,31 +70,42 @@ static int match_unit_directory(u32 * directory, const struct fw_device_id *id)
 	match = 0;
 	fw_csr_iterator_init(&ci, directory);
 	while (fw_csr_iterator_next(&ci, &key, &value)) {
-		if (key == CSR_VENDOR && value == id->vendor)
-			match |= FW_MATCH_VENDOR;
-		if (key == CSR_MODEL && value == id->model)
-			match |= FW_MATCH_MODEL;
+		if (key == CSR_VENDOR && value == id->vendor_id)
+			match |= IEEE1394_MATCH_VENDOR_ID;
+		if (key == CSR_MODEL && value == id->model_id)
+			match |= IEEE1394_MATCH_MODEL_ID;
 		if (key == CSR_SPECIFIER_ID && value == id->specifier_id)
-			match |= FW_MATCH_SPECIFIER_ID;
+			match |= IEEE1394_MATCH_SPECIFIER_ID;
 		if (key == CSR_VERSION && value == id->version)
-			match |= FW_MATCH_VERSION;
+			match |= IEEE1394_MATCH_VERSION;
 	}
 
-	return (match & id->match_flags) == id->match_flags;
+	return (match & match_flags) == match_flags;
 }
 
 static int fw_unit_match(struct device *dev, struct device_driver *drv)
 {
 	struct fw_unit *unit = fw_unit(dev);
-	struct fw_driver *driver = fw_driver(drv);
-	int i;
+	struct fw_device *device;
+	const struct ieee1394_device_id *id;
 
 	/* We only allow binding to fw_units. */
 	if (!is_fw_unit(dev))
 		return 0;
 
-	for (i = 0; driver->id_table[i].match_flags != 0; i++) {
-		if (match_unit_directory(unit->directory, &driver->id_table[i]))
+	device = fw_parent_device(unit);
+	id = container_of(drv, struct fw_driver, driver)->id_table;
+
+	for (; id->match_flags != 0; id++) {
+		if (match_unit_directory(unit->directory, id->match_flags, id))
+			return 1;
+
+		/* Also check vendor ID in the root directory. */
+		if ((id->match_flags & IEEE1394_MATCH_VENDOR_ID) &&
+		    match_unit_directory(&device->config_rom[5],
+				IEEE1394_MATCH_VENDOR_ID, id) &&
+		    match_unit_directory(unit->directory, id->match_flags
+				& ~IEEE1394_MATCH_VENDOR_ID, id))
 			return 1;
 	}
 
@@ -98,7 +114,7 @@ static int fw_unit_match(struct device *dev, struct device_driver *drv)
 
 static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size)
 {
-	struct fw_device *device = fw_device(unit->device.parent);
+	struct fw_device *device = fw_parent_device(unit);
 	struct fw_csr_iterator ci;
 
 	int key, value;
@@ -292,8 +308,7 @@ static void init_fw_attribute_group(struct device *dev,
 		group->attrs[j++] = &attr->attr;
 	}
 
-	BUG_ON(j >= ARRAY_SIZE(group->attrs));
-	group->attrs[j++] = NULL;
+	group->attrs[j] = NULL;
 	group->groups[0] = &group->group;
 	group->groups[1] = NULL;
 	group->group.attrs = group->attrs;
@@ -356,9 +371,56 @@ static ssize_t guid_show(struct device *dev,
 	return ret;
 }
 
+static int units_sprintf(char *buf, u32 *directory)
+{
+	struct fw_csr_iterator ci;
+	int key, value;
+	int specifier_id = 0;
+	int version = 0;
+
+	fw_csr_iterator_init(&ci, directory);
+	while (fw_csr_iterator_next(&ci, &key, &value)) {
+		switch (key) {
+		case CSR_SPECIFIER_ID:
+			specifier_id = value;
+			break;
+		case CSR_VERSION:
+			version = value;
+			break;
+		}
+	}
+
+	return sprintf(buf, "0x%06x:0x%06x ", specifier_id, version);
+}
+
+static ssize_t units_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct fw_device *device = fw_device(dev);
+	struct fw_csr_iterator ci;
+	int key, value, i = 0;
+
+	down_read(&fw_device_rwsem);
+	fw_csr_iterator_init(&ci, &device->config_rom[5]);
+	while (fw_csr_iterator_next(&ci, &key, &value)) {
+		if (key != (CSR_UNIT | CSR_DIRECTORY))
+			continue;
+		i += units_sprintf(&buf[i], ci.p + value - 1);
+		if (i >= PAGE_SIZE - (8 + 1 + 8 + 1))
+			break;
+	}
+	up_read(&fw_device_rwsem);
+
+	if (i)
+		buf[i - 1] = '\n';
+
+	return i;
+}
+
 static struct device_attribute fw_device_attributes[] = {
 	__ATTR_RO(config_rom),
 	__ATTR_RO(guid),
+	__ATTR_RO(units),
 	__ATTR_NULL,
 };
 
@@ -518,7 +580,9 @@ static int read_bus_info_block(struct fw_device *device, int generation)
 
 	kfree(old_rom);
 	ret = 0;
-	device->cmc = rom[2] >> 30 & 1;
+	device->max_rec	= rom[2] >> 12 & 0xf;
+	device->cmc	= rom[2] >> 30 & 1;
+	device->irmc	= rom[2] >> 31 & 1;
  out:
 	kfree(rom);
 
@@ -537,7 +601,7 @@ static struct device_type fw_unit_type = {
 	.release	= fw_unit_release,
 };
 
-static int is_fw_unit(struct device *dev)
+static bool is_fw_unit(struct device *dev)
 {
 	return dev->type == &fw_unit_type;
 }
@@ -570,9 +634,13 @@ static void create_units(struct fw_device *device)
 		unit->device.parent = &device->device;
 		dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++);
 
+		BUILD_BUG_ON(ARRAY_SIZE(unit->attribute_group.attrs) <
+				ARRAY_SIZE(fw_unit_attributes) +
+				ARRAY_SIZE(config_rom_attributes));
 		init_fw_attribute_group(&unit->device,
 					fw_unit_attributes,
 					&unit->attribute_group);
+
 		if (device_register(&unit->device) < 0)
 			goto skip_unit;
 
@@ -683,6 +751,11 @@ static struct device_type fw_device_type = {
 	.release = fw_device_release,
 };
 
+static bool is_fw_device(struct device *dev)
+{
+	return dev->type == &fw_device_type;
+}
+
 static int update_unit(struct device *dev, void *data)
 {
 	struct fw_unit *unit = fw_unit(dev);
@@ -719,6 +792,9 @@ static int lookup_existing_device(struct device *dev, void *data)
 	struct fw_card *card = new->card;
 	int match = 0;
 
+	if (!is_fw_device(dev))
+		return 0;
+
 	down_read(&fw_device_rwsem); /* serialize config_rom access */
 	spin_lock_irq(&card->lock);  /* serialize node access */
 
@@ -758,7 +834,7 @@ static int lookup_existing_device(struct device *dev, void *data)
 
 enum { BC_UNKNOWN = 0, BC_UNIMPLEMENTED, BC_IMPLEMENTED, };
 
-void fw_device_set_broadcast_channel(struct fw_device *device, int generation)
+static void set_broadcast_channel(struct fw_device *device, int generation)
 {
 	struct fw_card *card = device->card;
 	__be32 data;
@@ -767,6 +843,20 @@ void fw_device_set_broadcast_channel(struct fw_device *device, int generation)
 	if (!card->broadcast_channel_allocated)
 		return;
 
+	/*
+	 * The Broadcast_Channel Valid bit is required by nodes which want to
+	 * transmit on this channel.  Such transmissions are practically
+	 * exclusive to IP over 1394 (RFC 2734).  IP capable nodes are required
+	 * to be IRM capable and have a max_rec of 8 or more.  We use this fact
+	 * to narrow down to which nodes we send Broadcast_Channel updates.
+	 */
+	if (!device->irmc || device->max_rec < 8)
+		return;
+
+	/*
+	 * Some 1394-1995 nodes crash if this 1394a-2000 register is written.
+	 * Perform a read test first.
+	 */
 	if (device->bc_implemented == BC_UNKNOWN) {
 		rcode = fw_run_transaction(card, TCODE_READ_QUADLET_REQUEST,
 				device->node_id, generation, device->max_speed,
@@ -794,6 +884,14 @@ void fw_device_set_broadcast_channel(struct fw_device *device, int generation)
 	}
 }
 
+int fw_device_set_broadcast_channel(struct device *dev, void *gen)
+{
+	if (is_fw_device(dev))
+		set_broadcast_channel(fw_device(dev), (long)gen);
+
+	return 0;
+}
+
 static void fw_device_init(struct work_struct *work)
 {
 	struct fw_device *device =
@@ -849,9 +947,13 @@ static void fw_device_init(struct work_struct *work)
 	device->device.devt = MKDEV(fw_cdev_major, minor);
 	dev_set_name(&device->device, "fw%d", minor);
 
+	BUILD_BUG_ON(ARRAY_SIZE(device->attribute_group.attrs) <
+			ARRAY_SIZE(fw_device_attributes) +
+			ARRAY_SIZE(config_rom_attributes));
 	init_fw_attribute_group(&device->device,
 				fw_device_attributes,
 				&device->attribute_group);
+
 	if (device_add(&device->device)) {
 		fw_error("Failed to add device.\n");
 		goto error_with_cdev;
@@ -888,7 +990,7 @@ static void fw_device_init(struct work_struct *work)
 				  1 << device->max_speed);
 		device->config_rom_retries = 0;
 
-		fw_device_set_broadcast_channel(device, device->generation);
+		set_broadcast_channel(device, device->generation);
 	}
 
 	/*
@@ -993,6 +1095,9 @@ static void fw_device_refresh(struct work_struct *work)
 
 	create_units(device);
 
+	/* Userspace may want to re-read attributes. */
+	kobject_uevent(&device->device.kobj, KOBJ_CHANGE);
+
 	if (atomic_cmpxchg(&device->state,
 			   FW_DEVICE_INITIALIZING,
 			   FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
@@ -1042,6 +1147,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
 		device->node = fw_node_get(node);
 		device->node_id = node->node_id;
 		device->generation = card->generation;
+		device->is_local = node == card->local_node;
 		mutex_init(&device->client_list_mutex);
 		INIT_LIST_HEAD(&device->client_list);
 
@@ -1075,7 +1181,7 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
 			    FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) {
 			PREPARE_DELAYED_WORK(&device->work, fw_device_refresh);
 			schedule_delayed_work(&device->work,
-				node == card->local_node ? 0 : INITIAL_DELAY);
+				device->is_local ? 0 : INITIAL_DELAY);
 		}
 		break;
 
diff --git a/drivers/firewire/fw-iso.c b/drivers/firewire/core-iso.c
index 2baf1007253..28076c892d7 100644
--- a/drivers/firewire/fw-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -22,14 +22,16 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/errno.h>
+#include <linux/firewire.h>
 #include <linux/firewire-constants.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/vmalloc.h>
 
-#include "fw-topology.h"
-#include "fw-transaction.h"
+#include <asm/byteorder.h>
+
+#include "core.h"
 
 /*
  * Isochronous DMA context management
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/core-topology.c
index d0deecc4de9..fddf2b35893 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/core-topology.c
@@ -18,13 +18,22 @@
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
-#include <linux/module.h>
-#include <linux/wait.h>
+#include <linux/bug.h>
 #include <linux/errno.h>
-#include <asm/bug.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+#include <asm/atomic.h>
 #include <asm/system.h>
-#include "fw-transaction.h"
-#include "fw-topology.h"
+
+#include "core.h"
 
 #define SELF_ID_PHY_ID(q)		(((q) >> 24) & 0x3f)
 #define SELF_ID_EXTENDED(q)		(((q) >> 23) & 0x01)
@@ -37,6 +46,11 @@
 
 #define SELF_ID_EXT_SEQUENCE(q)		(((q) >> 20) & 0x07)
 
+#define SELFID_PORT_CHILD	0x3
+#define SELFID_PORT_PARENT	0x2
+#define SELFID_PORT_NCONN	0x1
+#define SELFID_PORT_NONE	0x0
+
 static u32 *count_ports(u32 *sid, int *total_port_count, int *child_port_count)
 {
 	u32 q;
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/core-transaction.c
index 283dac6d327..479b22f5a1e 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -18,24 +18,28 @@
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/bug.h>
 #include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/fs.h>
+#include <linux/init.h>
 #include <linux/idr.h>
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
-#include <linux/kref.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/poll.h>
 #include <linux/list.h>
-#include <linux/kthread.h>
-#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/types.h>
 
-#include "fw-transaction.h"
-#include "fw-topology.h"
-#include "fw-device.h"
+#include <asm/byteorder.h>
+
+#include "core.h"
 
 #define HEADER_PRI(pri)			((pri) << 0)
 #define HEADER_TCODE(tcode)		((tcode) << 4)
@@ -60,6 +64,10 @@
 #define HEADER_DESTINATION_IS_BROADCAST(q) \
 	(((q) & HEADER_DESTINATION(0x3f)) == HEADER_DESTINATION(0x3f))
 
+#define PHY_PACKET_CONFIG	0x0
+#define PHY_PACKET_LINK_ON	0x1
+#define PHY_PACKET_SELF_ID	0x2
+
 #define PHY_CONFIG_GAP_COUNT(gap_count)	(((gap_count) << 16) | (1 << 22))
 #define PHY_CONFIG_ROOT_ID(node_id)	((((node_id) & 0x3f) << 24) | (1 << 23))
 #define PHY_IDENTIFIER(id)		((id) << 30)
@@ -74,7 +82,7 @@ static int close_transaction(struct fw_transaction *transaction,
 	list_for_each_entry(t, &card->transaction_list, link) {
 		if (t == transaction) {
 			list_del(&t->link);
-			card->tlabel_mask &= ~(1 << t->tlabel);
+			card->tlabel_mask &= ~(1ULL << t->tlabel);
 			break;
 		}
 	}
@@ -280,14 +288,14 @@ void fw_send_request(struct fw_card *card, struct fw_transaction *t, int tcode,
 	spin_lock_irqsave(&card->lock, flags);
 
 	tlabel = card->current_tlabel;
-	if (card->tlabel_mask & (1 << tlabel)) {
+	if (card->tlabel_mask & (1ULL << tlabel)) {
 		spin_unlock_irqrestore(&card->lock, flags);
 		callback(card, RCODE_SEND_ERROR, NULL, 0, callback_data);
 		return;
 	}
 
-	card->current_tlabel = (card->current_tlabel + 1) & 0x1f;
-	card->tlabel_mask |= (1 << tlabel);
+	card->current_tlabel = (card->current_tlabel + 1) & 0x3f;
+	card->tlabel_mask |= (1ULL << tlabel);
 
 	t->node_id = destination_id;
 	t->tlabel = tlabel;
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
new file mode 100644
index 00000000000..0a25a7b38a8
--- /dev/null
+++ b/drivers/firewire/core.h
@@ -0,0 +1,293 @@
+#ifndef _FIREWIRE_CORE_H
+#define _FIREWIRE_CORE_H
+
+#include <linux/dma-mapping.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/idr.h>
+#include <linux/mm_types.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/atomic.h>
+
+struct device;
+struct fw_card;
+struct fw_device;
+struct fw_iso_buffer;
+struct fw_iso_context;
+struct fw_iso_packet;
+struct fw_node;
+struct fw_packet;
+
+
+/* -card */
+
+/* bitfields within the PHY registers */
+#define PHY_LINK_ACTIVE		0x80
+#define PHY_CONTENDER		0x40
+#define PHY_BUS_RESET		0x40
+#define PHY_BUS_SHORT_RESET	0x40
+
+#define BANDWIDTH_AVAILABLE_INITIAL	4915
+#define BROADCAST_CHANNEL_INITIAL	(1 << 31 | 31)
+#define BROADCAST_CHANNEL_VALID		(1 << 30)
+
+struct fw_card_driver {
+	/*
+	 * Enable the given card with the given initial config rom.
+	 * This function is expected to activate the card, and either
+	 * enable the PHY or set the link_on bit and initiate a bus
+	 * reset.
+	 */
+	int (*enable)(struct fw_card *card, u32 *config_rom, size_t length);
+
+	int (*update_phy_reg)(struct fw_card *card, int address,
+			      int clear_bits, int set_bits);
+
+	/*
+	 * Update the config rom for an enabled card.  This function
+	 * should change the config rom that is presented on the bus
+	 * an initiate a bus reset.
+	 */
+	int (*set_config_rom)(struct fw_card *card,
+			      u32 *config_rom, size_t length);
+
+	void (*send_request)(struct fw_card *card, struct fw_packet *packet);
+	void (*send_response)(struct fw_card *card, struct fw_packet *packet);
+	/* Calling cancel is valid once a packet has been submitted. */
+	int (*cancel_packet)(struct fw_card *card, struct fw_packet *packet);
+
+	/*
+	 * Allow the specified node ID to do direct DMA out and in of
+	 * host memory.  The card will disable this for all node when
+	 * a bus reset happens, so driver need to reenable this after
+	 * bus reset.  Returns 0 on success, -ENODEV if the card
+	 * doesn't support this, -ESTALE if the generation doesn't
+	 * match.
+	 */
+	int (*enable_phys_dma)(struct fw_card *card,
+			       int node_id, int generation);
+
+	u64 (*get_bus_time)(struct fw_card *card);
+
+	struct fw_iso_context *
+	(*allocate_iso_context)(struct fw_card *card,
+				int type, int channel, size_t header_size);
+	void (*free_iso_context)(struct fw_iso_context *ctx);
+
+	int (*start_iso)(struct fw_iso_context *ctx,
+			 s32 cycle, u32 sync, u32 tags);
+
+	int (*queue_iso)(struct fw_iso_context *ctx,
+			 struct fw_iso_packet *packet,
+			 struct fw_iso_buffer *buffer,
+			 unsigned long payload);
+
+	int (*stop_iso)(struct fw_iso_context *ctx);
+};
+
+void fw_card_initialize(struct fw_card *card,
+		const struct fw_card_driver *driver, struct device *device);
+int fw_card_add(struct fw_card *card,
+		u32 max_receive, u32 link_speed, u64 guid);
+void fw_core_remove_card(struct fw_card *card);
+int fw_core_initiate_bus_reset(struct fw_card *card, int short_reset);
+int fw_compute_block_crc(u32 *block);
+void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
+
+struct fw_descriptor {
+	struct list_head link;
+	size_t length;
+	u32 immediate;
+	u32 key;
+	const u32 *data;
+};
+
+int fw_core_add_descriptor(struct fw_descriptor *desc);
+void fw_core_remove_descriptor(struct fw_descriptor *desc);
+
+
+/* -cdev */
+
+extern const struct file_operations fw_device_ops;
+
+void fw_device_cdev_update(struct fw_device *device);
+void fw_device_cdev_remove(struct fw_device *device);
+
+
+/* -device */
+
+extern struct rw_semaphore fw_device_rwsem;
+extern struct idr fw_device_idr;
+extern int fw_cdev_major;
+
+struct fw_device *fw_device_get_by_devt(dev_t devt);
+int fw_device_set_broadcast_channel(struct device *dev, void *gen);
+void fw_node_event(struct fw_card *card, struct fw_node *node, int event);
+
+
+/* -iso */
+
+/*
+ * The iso packet format allows for an immediate header/payload part
+ * stored in 'header' immediately after the packet info plus an
+ * indirect payload part that is pointer to by the 'payload' field.
+ * Applications can use one or the other or both to implement simple
+ * low-bandwidth streaming (e.g. audio) or more advanced
+ * scatter-gather streaming (e.g. assembling video frame automatically).
+ */
+struct fw_iso_packet {
+	u16 payload_length;	/* Length of indirect payload. */
+	u32 interrupt:1;	/* Generate interrupt on this packet */
+	u32 skip:1;		/* Set to not send packet at all. */
+	u32 tag:2;
+	u32 sy:4;
+	u32 header_length:8;	/* Length of immediate header. */
+	u32 header[0];
+};
+
+#define FW_ISO_CONTEXT_TRANSMIT	0
+#define FW_ISO_CONTEXT_RECEIVE	1
+
+#define FW_ISO_CONTEXT_MATCH_TAG0	 1
+#define FW_ISO_CONTEXT_MATCH_TAG1	 2
+#define FW_ISO_CONTEXT_MATCH_TAG2	 4
+#define FW_ISO_CONTEXT_MATCH_TAG3	 8
+#define FW_ISO_CONTEXT_MATCH_ALL_TAGS	15
+
+/*
+ * An iso buffer is just a set of pages mapped for DMA in the
+ * specified direction.  Since the pages are to be used for DMA, they
+ * are not mapped into the kernel virtual address space.  We store the
+ * DMA address in the page private. The helper function
+ * fw_iso_buffer_map() will map the pages into a given vma.
+ */
+struct fw_iso_buffer {
+	enum dma_data_direction direction;
+	struct page **pages;
+	int page_count;
+};
+
+typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
+				  u32 cycle, size_t header_length,
+				  void *header, void *data);
+
+struct fw_iso_context {
+	struct fw_card *card;
+	int type;
+	int channel;
+	int speed;
+	size_t header_size;
+	fw_iso_callback_t callback;
+	void *callback_data;
+};
+
+int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
+		       int page_count, enum dma_data_direction direction);
+int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
+void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
+
+struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
+		int type, int channel, int speed, size_t header_size,
+		fw_iso_callback_t callback, void *callback_data);
+int fw_iso_context_queue(struct fw_iso_context *ctx,
+			 struct fw_iso_packet *packet,
+			 struct fw_iso_buffer *buffer,
+			 unsigned long payload);
+int fw_iso_context_start(struct fw_iso_context *ctx,
+			 int cycle, int sync, int tags);
+int fw_iso_context_stop(struct fw_iso_context *ctx);
+void fw_iso_context_destroy(struct fw_iso_context *ctx);
+
+void fw_iso_resource_manage(struct fw_card *card, int generation,
+		u64 channels_mask, int *channel, int *bandwidth, bool allocate);
+
+
+/* -topology */
+
+enum {
+	FW_NODE_CREATED,
+	FW_NODE_UPDATED,
+	FW_NODE_DESTROYED,
+	FW_NODE_LINK_ON,
+	FW_NODE_LINK_OFF,
+	FW_NODE_INITIATED_RESET,
+};
+
+struct fw_node {
+	u16 node_id;
+	u8 color;
+	u8 port_count;
+	u8 link_on:1;
+	u8 initiated_reset:1;
+	u8 b_path:1;
+	u8 phy_speed:2;	/* As in the self ID packet. */
+	u8 max_speed:2;	/* Minimum of all phy-speeds on the path from the
+			 * local node to this node. */
+	u8 max_depth:4;	/* Maximum depth to any leaf node */
+	u8 max_hops:4;	/* Max hops in this sub tree */
+	atomic_t ref_count;
+
+	/* For serializing node topology into a list. */
+	struct list_head link;
+
+	/* Upper layer specific data. */
+	void *data;
+
+	struct fw_node *ports[0];
+};
+
+static inline struct fw_node *fw_node_get(struct fw_node *node)
+{
+	atomic_inc(&node->ref_count);
+
+	return node;
+}
+
+static inline void fw_node_put(struct fw_node *node)
+{
+	if (atomic_dec_and_test(&node->ref_count))
+		kfree(node);
+}
+
+void fw_core_handle_bus_reset(struct fw_card *card, int node_id,
+			      int generation, int self_id_count, u32 *self_ids);
+void fw_destroy_nodes(struct fw_card *card);
+
+/*
+ * Check whether new_generation is the immediate successor of old_generation.
+ * Take counter roll-over at 255 (as per OHCI) into account.
+ */
+static inline bool is_next_generation(int new_generation, int old_generation)
+{
+	return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
+}
+
+
+/* -transaction */
+
+#define TCODE_IS_READ_REQUEST(tcode)	(((tcode) & ~1) == 4)
+#define TCODE_IS_BLOCK_PACKET(tcode)	(((tcode) &  1) != 0)
+#define TCODE_IS_REQUEST(tcode)		(((tcode) &  2) == 0)
+#define TCODE_IS_RESPONSE(tcode)	(((tcode) &  2) != 0)
+#define TCODE_HAS_REQUEST_DATA(tcode)	(((tcode) & 12) != 4)
+#define TCODE_HAS_RESPONSE_DATA(tcode)	(((tcode) & 12) != 0)
+
+#define LOCAL_BUS 0xffc0
+
+void fw_core_handle_request(struct fw_card *card, struct fw_packet *request);
+void fw_core_handle_response(struct fw_card *card, struct fw_packet *packet);
+void fw_fill_response(struct fw_packet *response, u32 *request_header,
+		      int rcode, void *payload, size_t length);
+void fw_flush_transactions(struct fw_card *card);
+void fw_send_phy_config(struct fw_card *card,
+			int node_id, int generation, int gap_count);
+
+static inline int fw_stream_packet_destination_id(int tag, int channel, int sy)
+{
+	return tag << 14 | channel << 8 | sy;
+}
+
+#endif /* _FIREWIRE_CORE_H */
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
deleted file mode 100644
index 97588937c01..00000000000
--- a/drivers/firewire/fw-device.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Copyright (C) 2005-2006  Kristian Hoegsberg <krh@bitplanet.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __fw_device_h
-#define __fw_device_h
-
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/idr.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/rwsem.h>
-#include <linux/sysfs.h>
-#include <linux/types.h>
-#include <linux/workqueue.h>
-
-#include <asm/atomic.h>
-
-enum fw_device_state {
-	FW_DEVICE_INITIALIZING,
-	FW_DEVICE_RUNNING,
-	FW_DEVICE_GONE,
-	FW_DEVICE_SHUTDOWN,
-};
-
-struct fw_attribute_group {
-	struct attribute_group *groups[2];
-	struct attribute_group group;
-	struct attribute *attrs[11];
-};
-
-struct fw_node;
-struct fw_card;
-
-/*
- * Note, fw_device.generation always has to be read before fw_device.node_id.
- * Use SMP memory barriers to ensure this.  Otherwise requests will be sent
- * to an outdated node_id if the generation was updated in the meantime due
- * to a bus reset.
- *
- * Likewise, fw-core will take care to update .node_id before .generation so
- * that whenever fw_device.generation is current WRT the actual bus generation,
- * fw_device.node_id is guaranteed to be current too.
- *
- * The same applies to fw_device.card->node_id vs. fw_device.generation.
- *
- * fw_device.config_rom and fw_device.config_rom_length may be accessed during
- * the lifetime of any fw_unit belonging to the fw_device, before device_del()
- * was called on the last fw_unit.  Alternatively, they may be accessed while
- * holding fw_device_rwsem.
- */
-struct fw_device {
-	atomic_t state;
-	struct fw_node *node;
-	int node_id;
-	int generation;
-	unsigned max_speed;
-	struct fw_card *card;
-	struct device device;
-
-	struct mutex client_list_mutex;
-	struct list_head client_list;
-
-	u32 *config_rom;
-	size_t config_rom_length;
-	int config_rom_retries;
-	unsigned cmc:1;
-	unsigned bc_implemented:2;
-
-	struct delayed_work work;
-	struct fw_attribute_group attribute_group;
-};
-
-static inline struct fw_device *fw_device(struct device *dev)
-{
-	return container_of(dev, struct fw_device, device);
-}
-
-static inline int fw_device_is_shutdown(struct fw_device *device)
-{
-	return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
-}
-
-static inline struct fw_device *fw_device_get(struct fw_device *device)
-{
-	get_device(&device->device);
-
-	return device;
-}
-
-static inline void fw_device_put(struct fw_device *device)
-{
-	put_device(&device->device);
-}
-
-struct fw_device *fw_device_get_by_devt(dev_t devt);
-int fw_device_enable_phys_dma(struct fw_device *device);
-void fw_device_set_broadcast_channel(struct fw_device *device, int generation);
-
-void fw_device_cdev_update(struct fw_device *device);
-void fw_device_cdev_remove(struct fw_device *device);
-
-extern struct rw_semaphore fw_device_rwsem;
-extern struct idr fw_device_idr;
-extern int fw_cdev_major;
-
-/*
- * fw_unit.directory must not be accessed after device_del(&fw_unit.device).
- */
-struct fw_unit {
-	struct device device;
-	u32 *directory;
-	struct fw_attribute_group attribute_group;
-};
-
-static inline struct fw_unit *fw_unit(struct device *dev)
-{
-	return container_of(dev, struct fw_unit, device);
-}
-
-static inline struct fw_unit *fw_unit_get(struct fw_unit *unit)
-{
-	get_device(&unit->device);
-
-	return unit;
-}
-
-static inline void fw_unit_put(struct fw_unit *unit)
-{
-	put_device(&unit->device);
-}
-
-#define CSR_OFFSET	0x40
-#define CSR_LEAF	0x80
-#define CSR_DIRECTORY	0xc0
-
-#define CSR_DESCRIPTOR		0x01
-#define CSR_VENDOR		0x03
-#define CSR_HARDWARE_VERSION	0x04
-#define CSR_NODE_CAPABILITIES	0x0c
-#define CSR_UNIT		0x11
-#define CSR_SPECIFIER_ID	0x12
-#define CSR_VERSION		0x13
-#define CSR_DEPENDENT_INFO	0x14
-#define CSR_MODEL		0x17
-#define CSR_INSTANCE		0x18
-#define CSR_DIRECTORY_ID	0x20
-
-struct fw_csr_iterator {
-	u32 *p;
-	u32 *end;
-};
-
-void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 *p);
-int fw_csr_iterator_next(struct fw_csr_iterator *ci,
-			 int *key, int *value);
-
-#define FW_MATCH_VENDOR		0x0001
-#define FW_MATCH_MODEL		0x0002
-#define FW_MATCH_SPECIFIER_ID	0x0004
-#define FW_MATCH_VERSION	0x0008
-
-struct fw_device_id {
-	u32 match_flags;
-	u32 vendor;
-	u32 model;
-	u32 specifier_id;
-	u32 version;
-	void *driver_data;
-};
-
-struct fw_driver {
-	struct device_driver driver;
-	/* Called when the parent device sits through a bus reset. */
-	void (*update) (struct fw_unit *unit);
-	const struct fw_device_id *id_table;
-};
-
-static inline struct fw_driver *fw_driver(struct device_driver *drv)
-{
-	return container_of(drv, struct fw_driver, driver);
-}
-
-extern const struct file_operations fw_device_ops;
-
-#endif /* __fw_device_h */
diff --git a/drivers/firewire/fw-topology.h b/drivers/firewire/fw-topology.h
deleted file mode 100644
index 3c497bb4fae..00000000000
--- a/drivers/firewire/fw-topology.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __fw_topology_h
-#define __fw_topology_h
-
-#include <linux/list.h>
-#include <linux/slab.h>
-
-#include <asm/atomic.h>
-
-enum {
-	FW_NODE_CREATED,
-	FW_NODE_UPDATED,
-	FW_NODE_DESTROYED,
-	FW_NODE_LINK_ON,
-	FW_NODE_LINK_OFF,
-	FW_NODE_INITIATED_RESET,
-};
-
-struct fw_node {
-	u16 node_id;
-	u8 color;
-	u8 port_count;
-	u8 link_on : 1;
-	u8 initiated_reset : 1;
-	u8 b_path : 1;
-	u8 phy_speed : 2; /* As in the self ID packet. */
-	u8 max_speed : 2; /* Minimum of all phy-speeds on the path from the
-			   * local node to this node. */
-	u8 max_depth : 4; /* Maximum depth to any leaf node */
-	u8 max_hops : 4;  /* Max hops in this sub tree */
-	atomic_t ref_count;
-
-	/* For serializing node topology into a list. */
-	struct list_head link;
-
-	/* Upper layer specific data. */
-	void *data;
-
-	struct fw_node *ports[0];
-};
-
-static inline struct fw_node *fw_node_get(struct fw_node *node)
-{
-	atomic_inc(&node->ref_count);
-
-	return node;
-}
-
-static inline void fw_node_put(struct fw_node *node)
-{
-	if (atomic_dec_and_test(&node->ref_count))
-		kfree(node);
-}
-
-struct fw_card;
-void fw_destroy_nodes(struct fw_card *card);
-
-int fw_compute_block_crc(u32 *block);
-
-#endif /* __fw_topology_h */
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
deleted file mode 100644
index dfa799068f8..00000000000
--- a/drivers/firewire/fw-transaction.h
+++ /dev/null
@@ -1,446 +0,0 @@
-/*
- * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __fw_transaction_h
-#define __fw_transaction_h
-
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/firewire-constants.h>
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/spinlock_types.h>
-#include <linux/timer.h>
-#include <linux/types.h>
-#include <linux/workqueue.h>
-
-#define TCODE_IS_READ_REQUEST(tcode)	(((tcode) & ~1) == 4)
-#define TCODE_IS_BLOCK_PACKET(tcode)	(((tcode) &  1) != 0)
-#define TCODE_IS_REQUEST(tcode)		(((tcode) &  2) == 0)
-#define TCODE_IS_RESPONSE(tcode)	(((tcode) &  2) != 0)
-#define TCODE_HAS_REQUEST_DATA(tcode)	(((tcode) & 12) != 4)
-#define TCODE_HAS_RESPONSE_DATA(tcode)	(((tcode) & 12) != 0)
-
-#define LOCAL_BUS 0xffc0
-
-#define SELFID_PORT_CHILD	0x3
-#define SELFID_PORT_PARENT	0x2
-#define SELFID_PORT_NCONN	0x1
-#define SELFID_PORT_NONE	0x0
-
-#define PHY_PACKET_CONFIG	0x0
-#define PHY_PACKET_LINK_ON	0x1
-#define PHY_PACKET_SELF_ID	0x2
-
-/* Bit fields _within_ the PHY registers. */
-#define PHY_LINK_ACTIVE		0x80
-#define PHY_CONTENDER		0x40
-#define PHY_BUS_RESET		0x40
-#define PHY_BUS_SHORT_RESET	0x40
-
-#define CSR_REGISTER_BASE		0xfffff0000000ULL
-
-/* register offsets relative to CSR_REGISTER_BASE */
-#define CSR_STATE_CLEAR			0x0
-#define CSR_STATE_SET			0x4
-#define CSR_NODE_IDS			0x8
-#define CSR_RESET_START			0xc
-#define CSR_SPLIT_TIMEOUT_HI		0x18
-#define CSR_SPLIT_TIMEOUT_LO		0x1c
-#define CSR_CYCLE_TIME			0x200
-#define CSR_BUS_TIME			0x204
-#define CSR_BUSY_TIMEOUT		0x210
-#define CSR_BUS_MANAGER_ID		0x21c
-#define CSR_BANDWIDTH_AVAILABLE		0x220
-#define CSR_CHANNELS_AVAILABLE		0x224
-#define CSR_CHANNELS_AVAILABLE_HI	0x224
-#define CSR_CHANNELS_AVAILABLE_LO	0x228
-#define CSR_BROADCAST_CHANNEL		0x234
-#define CSR_CONFIG_ROM			0x400
-#define CSR_CONFIG_ROM_END		0x800
-#define CSR_FCP_COMMAND			0xB00
-#define CSR_FCP_RESPONSE		0xD00
-#define CSR_FCP_END			0xF00
-#define CSR_TOPOLOGY_MAP		0x1000
-#define CSR_TOPOLOGY_MAP_END		0x1400
-#define CSR_SPEED_MAP			0x2000
-#define CSR_SPEED_MAP_END		0x3000
-
-#define BANDWIDTH_AVAILABLE_INITIAL	4915
-#define BROADCAST_CHANNEL_INITIAL	(1 << 31 | 31)
-#define BROADCAST_CHANNEL_VALID		(1 << 30)
-
-#define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args)
-#define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
-
-static inline void fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
-{
-	u32    *dst = _dst;
-	__be32 *src = _src;
-	int i;
-
-	for (i = 0; i < size / 4; i++)
-		dst[i] = be32_to_cpu(src[i]);
-}
-
-static inline void fw_memcpy_to_be32(void *_dst, void *_src, size_t size)
-{
-	fw_memcpy_from_be32(_dst, _src, size);
-}
-
-struct fw_card;
-struct fw_packet;
-struct fw_node;
-struct fw_request;
-
-struct fw_descriptor {
-	struct list_head link;
-	size_t length;
-	u32 immediate;
-	u32 key;
-	const u32 *data;
-};
-
-int fw_core_add_descriptor(struct fw_descriptor *desc);
-void fw_core_remove_descriptor(struct fw_descriptor *desc);
-
-typedef void (*fw_packet_callback_t)(struct fw_packet *packet,
-				     struct fw_card *card, int status);
-
-typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
-					  void *data, size_t length,
-					  void *callback_data);
-
-/*
- * Important note:  The callback must guarantee that either fw_send_response()
- * or kfree() is called on the @request.
- */
-typedef void (*fw_address_callback_t)(struct fw_card *card,
-				      struct fw_request *request,
-				      int tcode, int destination, int source,
-				      int generation, int speed,
-				      unsigned long long offset,
-				      void *data, size_t length,
-				      void *callback_data);
-
-struct fw_packet {
-	int speed;
-	int generation;
-	u32 header[4];
-	size_t header_length;
-	void *payload;
-	size_t payload_length;
-	dma_addr_t payload_bus;
-	u32 timestamp;
-
-	/*
-	 * This callback is called when the packet transmission has
-	 * completed; for successful transmission, the status code is
-	 * the ack received from the destination, otherwise it's a
-	 * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO.
-	 * The callback can be called from tasklet context and thus
-	 * must never block.
-	 */
-	fw_packet_callback_t callback;
-	int ack;
-	struct list_head link;
-	void *driver_data;
-};
-
-struct fw_transaction {
-	int node_id; /* The generation is implied; it is always the current. */
-	int tlabel;
-	int timestamp;
-	struct list_head link;
-
-	struct fw_packet packet;
-
-	/*
-	 * The data passed to the callback is valid only during the
-	 * callback.
-	 */
-	fw_transaction_callback_t callback;
-	void *callback_data;
-};
-
-struct fw_address_handler {
-	u64 offset;
-	size_t length;
-	fw_address_callback_t address_callback;
-	void *callback_data;
-	struct list_head link;
-};
-
-struct fw_address_region {
-	u64 start;
-	u64 end;
-};
-
-extern const struct fw_address_region fw_high_memory_region;
-
-int fw_core_add_address_handler(struct fw_address_handler *handler,
-				const struct fw_address_region *region);
-void fw_core_remove_address_handler(struct fw_address_handler *handler);
-void fw_fill_response(struct fw_packet *response, u32 *request_header,
-		      int rcode, void *payload, size_t length);
-void fw_send_response(struct fw_card *card,
-		      struct fw_request *request, int rcode);
-
-extern struct bus_type fw_bus_type;
-
-struct fw_card {
-	const struct fw_card_driver *driver;
-	struct device *device;
-	struct kref kref;
-	struct completion done;
-
-	int node_id;
-	int generation;
-	int current_tlabel, tlabel_mask;
-	struct list_head transaction_list;
-	struct timer_list flush_timer;
-	unsigned long reset_jiffies;
-
-	unsigned long long guid;
-	unsigned max_receive;
-	int link_speed;
-	int config_rom_generation;
-
-	spinlock_t lock; /* Take this lock when handling the lists in
-			  * this struct. */
-	struct fw_node *local_node;
-	struct fw_node *root_node;
-	struct fw_node *irm_node;
-	u8 color; /* must be u8 to match the definition in struct fw_node */
-	int gap_count;
-	bool beta_repeaters_present;
-
-	int index;
-
-	struct list_head link;
-
-	/* Work struct for BM duties. */
-	struct delayed_work work;
-	int bm_retries;
-	int bm_generation;
-
-	bool broadcast_channel_allocated;
-	u32 broadcast_channel;
-	u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
-};
-
-static inline struct fw_card *fw_card_get(struct fw_card *card)
-{
-	kref_get(&card->kref);
-
-	return card;
-}
-
-void fw_card_release(struct kref *kref);
-
-static inline void fw_card_put(struct fw_card *card)
-{
-	kref_put(&card->kref, fw_card_release);
-}
-
-extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
-
-/*
- * Check whether new_generation is the immediate successor of old_generation.
- * Take counter roll-over at 255 (as per to OHCI) into account.
- */
-static inline bool is_next_generation(int new_generation, int old_generation)
-{
-	return (new_generation & 0xff) == ((old_generation + 1) & 0xff);
-}
-
-/*
- * The iso packet format allows for an immediate header/payload part
- * stored in 'header' immediately after the packet info plus an
- * indirect payload part that is pointer to by the 'payload' field.
- * Applications can use one or the other or both to implement simple
- * low-bandwidth streaming (e.g. audio) or more advanced
- * scatter-gather streaming (e.g. assembling video frame automatically).
- */
-
-struct fw_iso_packet {
-	u16 payload_length;	/* Length of indirect payload. */
-	u32 interrupt : 1;	/* Generate interrupt on this packet */
-	u32 skip : 1;		/* Set to not send packet at all. */
-	u32 tag : 2;
-	u32 sy : 4;
-	u32 header_length : 8;	/* Length of immediate header. */
-	u32 header[0];
-};
-
-#define FW_ISO_CONTEXT_TRANSMIT	0
-#define FW_ISO_CONTEXT_RECEIVE	1
-
-#define FW_ISO_CONTEXT_MATCH_TAG0	 1
-#define FW_ISO_CONTEXT_MATCH_TAG1	 2
-#define FW_ISO_CONTEXT_MATCH_TAG2	 4
-#define FW_ISO_CONTEXT_MATCH_TAG3	 8
-#define FW_ISO_CONTEXT_MATCH_ALL_TAGS	15
-
-struct fw_iso_context;
-
-typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
-				  u32 cycle, size_t header_length,
-				  void *header, void *data);
-
-/*
- * An iso buffer is just a set of pages mapped for DMA in the
- * specified direction.  Since the pages are to be used for DMA, they
- * are not mapped into the kernel virtual address space.  We store the
- * DMA address in the page private. The helper function
- * fw_iso_buffer_map() will map the pages into a given vma.
- */
-
-struct fw_iso_buffer {
-	enum dma_data_direction direction;
-	struct page **pages;
-	int page_count;
-};
-
-struct fw_iso_context {
-	struct fw_card *card;
-	int type;
-	int channel;
-	int speed;
-	size_t header_size;
-	fw_iso_callback_t callback;
-	void *callback_data;
-};
-
-int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
-		       int page_count, enum dma_data_direction direction);
-int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
-void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
-
-struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
-		int type, int channel, int speed, size_t header_size,
-		fw_iso_callback_t callback, void *callback_data);
-int fw_iso_context_queue(struct fw_iso_context *ctx,
-			 struct fw_iso_packet *packet,
-			 struct fw_iso_buffer *buffer,
-			 unsigned long payload);
-int fw_iso_context_start(struct fw_iso_context *ctx,
-			 int cycle, int sync, int tags);
-int fw_iso_context_stop(struct fw_iso_context *ctx);
-void fw_iso_context_destroy(struct fw_iso_context *ctx);
-
-void fw_iso_resource_manage(struct fw_card *card, int generation,
-		u64 channels_mask, int *channel, int *bandwidth, bool allocate);
-
-struct fw_card_driver {
-	/*
-	 * Enable the given card with the given initial config rom.
-	 * This function is expected to activate the card, and either
-	 * enable the PHY or set the link_on bit and initiate a bus
-	 * reset.
-	 */
-	int (*enable)(struct fw_card *card, u32 *config_rom, size_t length);
-
-	int (*update_phy_reg)(struct fw_card *card, int address,
-			      int clear_bits, int set_bits);
-
-	/*
-	 * Update the config rom for an enabled card.  This function
-	 * should change the config rom that is presented on the bus
-	 * an initiate a bus reset.
-	 */
-	int (*set_config_rom)(struct fw_card *card,
-			      u32 *config_rom, size_t length);
-
-	void (*send_request)(struct fw_card *card, struct fw_packet *packet);
-	void (*send_response)(struct fw_card *card, struct fw_packet *packet);
-	/* Calling cancel is valid once a packet has been submitted. */
-	int (*cancel_packet)(struct fw_card *card, struct fw_packet *packet);
-
-	/*
-	 * Allow the specified node ID to do direct DMA out and in of
-	 * host memory.  The card will disable this for all node when
-	 * a bus reset happens, so driver need to reenable this after
-	 * bus reset.  Returns 0 on success, -ENODEV if the card
-	 * doesn't support this, -ESTALE if the generation doesn't
-	 * match.
-	 */
-	int (*enable_phys_dma)(struct fw_card *card,
-			       int node_id, int generation);
-
-	u64 (*get_bus_time)(struct fw_card *card);
-
-	struct fw_iso_context *
-	(*allocate_iso_context)(struct fw_card *card,
-				int type, int channel, size_t header_size);
-	void (*free_iso_context)(struct fw_iso_context *ctx);
-
-	int (*start_iso)(struct fw_iso_context *ctx,
-			 s32 cycle, u32 sync, u32 tags);
-
-	int (*queue_iso)(struct fw_iso_context *ctx,
-			 struct fw_iso_packet *packet,
-			 struct fw_iso_buffer *buffer,
-			 unsigned long payload);
-
-	int (*stop_iso)(struct fw_iso_context *ctx);
-};
-
-int fw_core_initiate_bus_reset(struct fw_card *card, int short_reset);
-
-void fw_send_request(struct fw_card *card, struct fw_transaction *t,
-		int tcode, int destination_id, int generation, int speed,
-		unsigned long long offset, void *payload, size_t length,
-		fw_transaction_callback_t callback, void *callback_data);
-int fw_cancel_transaction(struct fw_card *card,
-			  struct fw_transaction *transaction);
-void fw_flush_transactions(struct fw_card *card);
-int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
-		       int generation, int speed, unsigned long long offset,
-		       void *payload, size_t length);
-void fw_send_phy_config(struct fw_card *card,
-			int node_id, int generation, int gap_count);
-
-static inline int fw_stream_packet_destination_id(int tag, int channel, int sy)
-{
-	return tag << 14 | channel << 8 | sy;
-}
-
-/*
- * Called by the topology code to inform the device code of node
- * activity; found, lost, or updated nodes.
- */
-void fw_node_event(struct fw_card *card, struct fw_node *node, int event);
-
-/* API used by card level drivers */
-
-void fw_card_initialize(struct fw_card *card,
-		const struct fw_card_driver *driver, struct device *device);
-int fw_card_add(struct fw_card *card,
-		u32 max_receive, u32 link_speed, u64 guid);
-void fw_core_remove_card(struct fw_card *card);
-void fw_core_handle_bus_reset(struct fw_card *card, int node_id,
-		int generation, int self_id_count, u32 *self_ids);
-void fw_core_handle_request(struct fw_card *card, struct fw_packet *request);
-void fw_core_handle_response(struct fw_card *card, struct fw_packet *packet);
-
-extern int fw_irm_set_broadcast_channel_register(struct device *dev,
-						 void *data);
-
-#endif /* __fw_transaction_h */
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/ohci.c
index 1180d0be0bb..ecddd11b797 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/ohci.c
@@ -20,17 +20,25 @@
 
 #include <linux/compiler.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
 #include <linux/gfp.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/list.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
+#include <linux/string.h>
 
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
 #include <asm/page.h>
 #include <asm/system.h>
 
@@ -38,8 +46,8 @@
 #include <asm/pmac_feature.h>
 #endif
 
-#include "fw-ohci.h"
-#include "fw-transaction.h"
+#include "core.h"
+#include "ohci.h"
 
 #define DESCRIPTOR_OUTPUT_MORE		0
 #define DESCRIPTOR_OUTPUT_LAST		(1 << 12)
@@ -178,7 +186,7 @@ struct fw_ohci {
 	int node_id;
 	int generation;
 	int request_generation;	/* for timestamping incoming requests */
-	u32 bus_seconds;
+	atomic_t bus_seconds;
 
 	bool use_dualbuffer;
 	bool old_uninorth;
@@ -231,7 +239,6 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card)
 #define OHCI1394_MAX_AT_RESP_RETRIES	0x2
 #define OHCI1394_MAX_PHYS_RESP_RETRIES	0x8
 
-#define FW_OHCI_MAJOR			240
 #define OHCI1394_REGISTER_SIZE		0x800
 #define OHCI_LOOP_COUNT			500
 #define OHCI1394_PCI_HCI_Control	0x40
@@ -1434,7 +1441,7 @@ static irqreturn_t irq_handler(int irq, void *data)
 	if (event & OHCI1394_cycle64Seconds) {
 		cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
 		if ((cycle_time & 0x80000000) == 0)
-			ohci->bus_seconds++;
+			atomic_inc(&ohci->bus_seconds);
 	}
 
 	return IRQ_HANDLED;
@@ -1770,7 +1777,7 @@ static u64 ohci_get_bus_time(struct fw_card *card)
 	u64 bus_time;
 
 	cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
-	bus_time = ((u64) ohci->bus_seconds << 32) | cycle_time;
+	bus_time = ((u64)atomic_read(&ohci->bus_seconds) << 32) | cycle_time;
 
 	return bus_time;
 }
diff --git a/drivers/firewire/fw-ohci.h b/drivers/firewire/ohci.h
index a2fbb6240ca..ba492d85c51 100644
--- a/drivers/firewire/fw-ohci.h
+++ b/drivers/firewire/ohci.h
@@ -1,5 +1,5 @@
-#ifndef __fw_ohci_h
-#define __fw_ohci_h
+#ifndef _FIREWIRE_OHCI_H
+#define _FIREWIRE_OHCI_H
 
 /* OHCI register map */
 
@@ -154,4 +154,4 @@
 
 #define OHCI1394_phy_tcode		0xe
 
-#endif /* __fw_ohci_h */
+#endif /* _FIREWIRE_OHCI_H */
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/sbp2.c
index 2bcf51557c7..24c45635376 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -30,18 +30,28 @@
 
 #include <linux/blkdev.h>
 #include <linux/bug.h>
+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/list.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/stringify.h>
-#include <linux/timer.h>
 #include <linux/workqueue.h>
+
+#include <asm/byteorder.h>
 #include <asm/system.h>
 
 #include <scsi/scsi.h>
@@ -49,10 +59,6 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 
-#include "fw-device.h"
-#include "fw-topology.h"
-#include "fw-transaction.h"
-
 /*
  * So far only bridges from Oxford Semiconductor are known to support
  * concurrent logins. Depending on firmware, four or two concurrent logins
@@ -174,6 +180,11 @@ struct sbp2_target {
 	int blocked;	/* ditto */
 };
 
+static struct fw_device *target_device(struct sbp2_target *tgt)
+{
+	return fw_parent_device(tgt->unit);
+}
+
 /* Impossible login_id, to detect logout attempt before successful login */
 #define INVALID_LOGIN_ID 0x10000
 
@@ -482,7 +493,7 @@ static void complete_transaction(struct fw_card *card, int rcode,
 static void sbp2_send_orb(struct sbp2_orb *orb, struct sbp2_logical_unit *lu,
 			  int node_id, int generation, u64 offset)
 {
-	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+	struct fw_device *device = target_device(lu->tgt);
 	unsigned long flags;
 
 	orb->pointer.high = 0;
@@ -504,7 +515,7 @@ static void sbp2_send_orb(struct sbp2_orb *orb, struct sbp2_logical_unit *lu,
 
 static int sbp2_cancel_orbs(struct sbp2_logical_unit *lu)
 {
-	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+	struct fw_device *device = target_device(lu->tgt);
 	struct sbp2_orb *orb, *next;
 	struct list_head list;
 	unsigned long flags;
@@ -542,7 +553,7 @@ static int sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 				    int generation, int function,
 				    int lun_or_login_id, void *response)
 {
-	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+	struct fw_device *device = target_device(lu->tgt);
 	struct sbp2_management_orb *orb;
 	unsigned int timeout;
 	int retval = -ENOMEM;
@@ -638,7 +649,7 @@ static int sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 
 static void sbp2_agent_reset(struct sbp2_logical_unit *lu)
 {
-	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+	struct fw_device *device = target_device(lu->tgt);
 	__be32 d = 0;
 
 	fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST,
@@ -655,7 +666,7 @@ static void complete_agent_reset_write_no_wait(struct fw_card *card,
 
 static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu)
 {
-	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+	struct fw_device *device = target_device(lu->tgt);
 	struct fw_transaction *t;
 	static __be32 d;
 
@@ -694,7 +705,7 @@ static inline void sbp2_allow_block(struct sbp2_logical_unit *lu)
 static void sbp2_conditionally_block(struct sbp2_logical_unit *lu)
 {
 	struct sbp2_target *tgt = lu->tgt;
-	struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+	struct fw_card *card = target_device(tgt)->card;
 	struct Scsi_Host *shost =
 		container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
 	unsigned long flags;
@@ -718,7 +729,7 @@ static void sbp2_conditionally_block(struct sbp2_logical_unit *lu)
 static void sbp2_conditionally_unblock(struct sbp2_logical_unit *lu)
 {
 	struct sbp2_target *tgt = lu->tgt;
-	struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+	struct fw_card *card = target_device(tgt)->card;
 	struct Scsi_Host *shost =
 		container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
 	unsigned long flags;
@@ -743,7 +754,7 @@ static void sbp2_conditionally_unblock(struct sbp2_logical_unit *lu)
  */
 static void sbp2_unblock(struct sbp2_target *tgt)
 {
-	struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+	struct fw_card *card = target_device(tgt)->card;
 	struct Scsi_Host *shost =
 		container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
 	unsigned long flags;
@@ -773,7 +784,7 @@ static void sbp2_release_target(struct kref *kref)
 	struct Scsi_Host *shost =
 		container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
 	struct scsi_device *sdev;
-	struct fw_device *device = fw_device(tgt->unit->device.parent);
+	struct fw_device *device = target_device(tgt);
 
 	/* prevent deadlocks */
 	sbp2_unblock(tgt);
@@ -846,7 +857,7 @@ static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
  */
 static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu)
 {
-	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+	struct fw_device *device = target_device(lu->tgt);
 	__be32 d = cpu_to_be32(SBP2_CYCLE_LIMIT | SBP2_RETRY_LIMIT);
 
 	fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST,
@@ -862,7 +873,7 @@ static void sbp2_login(struct work_struct *work)
 	struct sbp2_logical_unit *lu =
 		container_of(work, struct sbp2_logical_unit, work.work);
 	struct sbp2_target *tgt = lu->tgt;
-	struct fw_device *device = fw_device(tgt->unit->device.parent);
+	struct fw_device *device = target_device(tgt);
 	struct Scsi_Host *shost;
 	struct scsi_device *sdev;
 	struct sbp2_login_response response;
@@ -1110,7 +1121,7 @@ static struct scsi_host_template scsi_driver_template;
 static int sbp2_probe(struct device *dev)
 {
 	struct fw_unit *unit = fw_unit(dev);
-	struct fw_device *device = fw_device(unit->device.parent);
+	struct fw_device *device = fw_parent_device(unit);
 	struct sbp2_target *tgt;
 	struct sbp2_logical_unit *lu;
 	struct Scsi_Host *shost;
@@ -1125,7 +1136,7 @@ static int sbp2_probe(struct device *dev)
 		return -ENOMEM;
 
 	tgt = (struct sbp2_target *)shost->hostdata;
-	unit->device.driver_data = tgt;
+	dev_set_drvdata(&unit->device, tgt);
 	tgt->unit = unit;
 	kref_init(&tgt->kref);
 	INIT_LIST_HEAD(&tgt->lu_list);
@@ -1180,7 +1191,7 @@ static int sbp2_probe(struct device *dev)
 static int sbp2_remove(struct device *dev)
 {
 	struct fw_unit *unit = fw_unit(dev);
-	struct sbp2_target *tgt = unit->device.driver_data;
+	struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
 
 	sbp2_target_put(tgt);
 	return 0;
@@ -1191,7 +1202,7 @@ static void sbp2_reconnect(struct work_struct *work)
 	struct sbp2_logical_unit *lu =
 		container_of(work, struct sbp2_logical_unit, work.work);
 	struct sbp2_target *tgt = lu->tgt;
-	struct fw_device *device = fw_device(tgt->unit->device.parent);
+	struct fw_device *device = target_device(tgt);
 	int generation, node_id, local_node_id;
 
 	if (fw_device_is_shutdown(device))
@@ -1240,10 +1251,10 @@ static void sbp2_reconnect(struct work_struct *work)
 
 static void sbp2_update(struct fw_unit *unit)
 {
-	struct sbp2_target *tgt = unit->device.driver_data;
+	struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
 	struct sbp2_logical_unit *lu;
 
-	fw_device_enable_phys_dma(fw_device(unit->device.parent));
+	fw_device_enable_phys_dma(fw_parent_device(unit));
 
 	/*
 	 * Fw-core serializes sbp2_update() against sbp2_remove().
@@ -1259,9 +1270,10 @@ static void sbp2_update(struct fw_unit *unit)
 #define SBP2_UNIT_SPEC_ID_ENTRY	0x0000609e
 #define SBP2_SW_VERSION_ENTRY	0x00010483
 
-static const struct fw_device_id sbp2_id_table[] = {
+static const struct ieee1394_device_id sbp2_id_table[] = {
 	{
-		.match_flags  = FW_MATCH_SPECIFIER_ID | FW_MATCH_VERSION,
+		.match_flags  = IEEE1394_MATCH_SPECIFIER_ID |
+				IEEE1394_MATCH_VERSION,
 		.specifier_id = SBP2_UNIT_SPEC_ID_ENTRY,
 		.version      = SBP2_SW_VERSION_ENTRY,
 	},
@@ -1335,7 +1347,7 @@ static void complete_command_orb(struct sbp2_orb *base_orb,
 {
 	struct sbp2_command_orb *orb =
 		container_of(base_orb, struct sbp2_command_orb, base);
-	struct fw_device *device = fw_device(orb->lu->tgt->unit->device.parent);
+	struct fw_device *device = target_device(orb->lu->tgt);
 	int result;
 
 	if (status != NULL) {
@@ -1442,7 +1454,7 @@ static int sbp2_map_scatterlist(struct sbp2_command_orb *orb,
 static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 {
 	struct sbp2_logical_unit *lu = cmd->device->hostdata;
-	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+	struct fw_device *device = target_device(lu->tgt);
 	struct sbp2_command_orb *orb;
 	int generation, retval = SCSI_MLQUEUE_HOST_BUSY;
 
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 05aa2d406ac..d5ea8a68d33 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -31,8 +31,12 @@
  * information is necessary as for the resource tree.
  */
 struct firmware_map_entry {
-	resource_size_t		start;	/* start of the memory range */
-	resource_size_t		end;	/* end of the memory range (incl.) */
+	/*
+	 * start and end must be u64 rather than resource_size_t, because e820
+	 * resources can lie at addresses above 4G.
+	 */
+	u64			start;	/* start of the memory range */
+	u64			end;	/* end of the memory range (incl.) */
 	const char		*type;	/* type of the memory range */
 	struct list_head	list;	/* entry for the linked list */
 	struct kobject		kobj;   /* kobject for each entry */
@@ -101,7 +105,7 @@ static LIST_HEAD(map_entries);
  * Common implementation of firmware_map_add() and firmware_map_add_early()
  * which expects a pre-allocated struct firmware_map_entry.
  **/
-static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
+static int firmware_map_add_entry(u64 start, u64 end,
 				  const char *type,
 				  struct firmware_map_entry *entry)
 {
@@ -132,8 +136,7 @@ static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
  *
  * Returns 0 on success, or -ENOMEM if no memory could be allocated.
  **/
-int firmware_map_add(resource_size_t start, resource_size_t end,
-		     const char *type)
+int firmware_map_add(u64 start, u64 end, const char *type)
 {
 	struct firmware_map_entry *entry;
 
@@ -157,8 +160,7 @@ int firmware_map_add(resource_size_t start, resource_size_t end,
  *
  * Returns 0 on success, or -ENOMEM if no memory could be allocated.
  **/
-int __init firmware_map_add_early(resource_size_t start, resource_size_t end,
-				  const char *type)
+int __init firmware_map_add_early(u64 start, u64 end, const char *type)
 {
 	struct firmware_map_entry *entry;
 
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index f5d46e7199d..c961fe415ae 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -18,6 +18,14 @@ menuconfig DRM
 	  details.  You should also select and configure AGP
 	  (/dev/agpgart) support.
 
+config DRM_TTM
+	tristate
+	depends on DRM
+	help
+	  GPU memory management subsystem for devices with multiple
+	  GPU memory types. Will be enabled automatically if a device driver
+	  uses it.
+
 config DRM_TDFX
 	tristate "3dfx Banshee/Voodoo3+"
 	depends on DRM && PCI
@@ -36,6 +44,11 @@ config DRM_R128
 config DRM_RADEON
 	tristate "ATI Radeon"
 	depends on DRM && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB
+	select FRAMEBUFFER_CONSOLE if !EMBEDDED
 	help
 	  Choose this option if you have an ATI Radeon graphics card.  There
 	  are both PCI and AGP versions.  You don't need to choose this to
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 4ec5061fa58..4e89ab08b7b 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -26,4 +26,4 @@ obj-$(CONFIG_DRM_I915)  += i915/
 obj-$(CONFIG_DRM_SIS)   += sis/
 obj-$(CONFIG_DRM_SAVAGE)+= savage/
 obj-$(CONFIG_DRM_VIA)	+=via/
-
+obj-$(CONFIG_DRM_TTM)	+= ttm/
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index c77c6c6d9d2..6ce0e2667a8 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -105,7 +105,7 @@ int drm_debugfs_create_files(struct drm_info_list *files, int count,
 		ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO,
 					  root, tmp, &drm_debugfs_fops);
 		if (!ent) {
-			DRM_ERROR("Cannot create /debugfs/dri/%s/%s\n",
+			DRM_ERROR("Cannot create /sys/kernel/debug/dri/%s/%s\n",
 				  name, files[i].name);
 			drm_free(tmp, sizeof(struct drm_info_node),
 				 _DRM_DRIVER);
@@ -133,9 +133,9 @@ EXPORT_SYMBOL(drm_debugfs_create_files);
  * \param minor device minor number
  * \param root DRI debugfs dir entry.
  *
- * Create the DRI debugfs root entry "/debugfs/dri", the device debugfs root entry
- * "/debugfs/dri/%minor%/", and each entry in debugfs_list as
- * "/debugfs/dri/%minor%/%name%".
+ * Create the DRI debugfs root entry "/sys/kernel/debug/dri", the device debugfs root entry
+ * "/sys/kernel/debug/dri/%minor%/", and each entry in debugfs_list as
+ * "/sys/kernel/debug/dri/%minor%/%name%".
  */
 int drm_debugfs_init(struct drm_minor *minor, int minor_id,
 		     struct dentry *root)
@@ -148,7 +148,7 @@ int drm_debugfs_init(struct drm_minor *minor, int minor_id,
 	sprintf(name, "%d", minor_id);
 	minor->debugfs_root = debugfs_create_dir(name, root);
 	if (!minor->debugfs_root) {
-		DRM_ERROR("Cannot create /debugfs/dri/%s\n", name);
+		DRM_ERROR("Cannot create /sys/kernel/debug/dri/%s\n", name);
 		return -1;
 	}
 
@@ -165,7 +165,7 @@ int drm_debugfs_init(struct drm_minor *minor, int minor_id,
 		ret = dev->driver->debugfs_init(minor);
 		if (ret) {
 			DRM_ERROR("DRM: Driver failed to initialize "
-				  "/debugfs/dri.\n");
+				  "/sys/kernel/debug/dri.\n");
 			return ret;
 		}
 	}
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 019b7c57823..1bf7efd8d33 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -339,7 +339,7 @@ static int __init drm_core_init(void)
 
 	drm_debugfs_root = debugfs_create_dir("dri", NULL);
 	if (!drm_debugfs_root) {
-		DRM_ERROR("Cannot create /debugfs/dri\n");
+		DRM_ERROR("Cannot create /sys/kernel/debug/dri\n");
 		ret = -1;
 		goto err_p3;
 	}
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 7819fd930a5..a912a0ff11c 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -188,36 +188,34 @@ static struct drm_mm_node *drm_mm_split_at_start(struct drm_mm_node *parent,
 
 
 
-struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent,
-				unsigned long size, unsigned alignment)
+struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *node,
+				     unsigned long size, unsigned alignment)
 {
 
 	struct drm_mm_node *align_splitoff = NULL;
-	struct drm_mm_node *child;
 	unsigned tmp = 0;
 
 	if (alignment)
-		tmp = parent->start % alignment;
+		tmp = node->start % alignment;
 
 	if (tmp) {
 		align_splitoff =
-		    drm_mm_split_at_start(parent, alignment - tmp, 0);
+		    drm_mm_split_at_start(node, alignment - tmp, 0);
 		if (unlikely(align_splitoff == NULL))
 			return NULL;
 	}
 
-	if (parent->size == size) {
-		list_del_init(&parent->fl_entry);
-		parent->free = 0;
-		return parent;
+	if (node->size == size) {
+		list_del_init(&node->fl_entry);
+		node->free = 0;
 	} else {
-		child = drm_mm_split_at_start(parent, size, 0);
+		node = drm_mm_split_at_start(node, size, 0);
 	}
 
 	if (align_splitoff)
 		drm_mm_put_block(align_splitoff);
 
-	return child;
+	return node;
 }
 
 EXPORT_SYMBOL(drm_mm_get_block);
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 89050684fe0..387a8de1bc7 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -343,7 +343,7 @@ static int drm_get_minor(struct drm_device *dev, struct drm_minor **minor, int t
 #if defined(CONFIG_DEBUG_FS)
 	ret = drm_debugfs_init(new_minor, minor_id, drm_debugfs_root);
 	if (ret) {
-		DRM_ERROR("DRM: Failed to initialize /debugfs/dri.\n");
+		DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n");
 		goto err_g2;
 	}
 #endif
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 9987ab88083..85ec31b3ff0 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -70,6 +70,11 @@ static ssize_t version_show(struct class *dev, char *buf)
 		       CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE);
 }
 
+static char *drm_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "dri/%s", dev_name(dev));
+}
+
 static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
 
 /**
@@ -101,6 +106,8 @@ struct class *drm_sysfs_create(struct module *owner, char *name)
 	if (err)
 		goto err_out_class;
 
+	class->nodename = drm_nodename;
+
 	return class;
 
 err_out_class:
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 0ecf6b76a40..8e28e5993df 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -504,6 +504,14 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 	info->fbops = &intelfb_ops;
 
 	info->fix.line_length = fb->pitch;
+
+	/* setup aperture base/size for vesafb takeover */
+	info->aperture_base = dev->mode_config.fb_base;
+	if (IS_I9XX(dev))
+		info->aperture_size = pci_resource_len(dev->pdev, 2);
+	else
+		info->aperture_size = pci_resource_len(dev->pdev, 0);
+
 	info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset;
 	info->fix.smem_len = size;
 
diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
new file mode 100644
index 00000000000..2168d67f09a
--- /dev/null
+++ b/drivers/gpu/drm/radeon/Kconfig
@@ -0,0 +1,34 @@
+config DRM_RADEON_KMS
+	bool "Enable modesetting on radeon by default"
+	depends on DRM_RADEON
+	select DRM_TTM
+	help
+	  Choose this option if you want kernel modesetting enabled by default,
+	  and you have a new enough userspace to support this. Running old
+	  userspaces with this enabled will cause pain.
+
+	  When kernel modesetting is enabled the IOCTL of radeon/drm
+	  driver are considered as invalid and an error message is printed
+	  in the log and they return failure.
+
+	  KMS enabled userspace will use new API to talk with the radeon/drm
+	  driver. The new API provide functions to create/destroy/share/mmap
+	  buffer object which are then managed by the kernel memory manager
+	  (here TTM). In order to submit command to the GPU the userspace
+	  provide a buffer holding the command stream, along this buffer
+	  userspace have to provide a list of buffer object used by the
+	  command stream. The kernel radeon driver will then place buffer
+	  in GPU accessible memory and will update command stream to reflect
+	  the position of the different buffers.
+
+	  The kernel will also perform security check on command stream
+	  provided by the user, we want to catch and forbid any illegal use
+	  of the GPU such as DMA into random system memory or into memory
+	  not owned by the process supplying the command stream. This part
+	  of the code is still incomplete and this why we propose that patch
+	  as a staging driver addition, future security might forbid current
+	  experimental userspace to run.
+
+	  This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX
+	  (radeon up to X1950). Works is underway to provide support for R6XX,
+	  R7XX and newer hardware (radeon from HD2XXX to HD4XXX).
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 52ce439a0f2..5fae1e074b4 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -3,7 +3,17 @@
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 
 ccflags-y := -Iinclude/drm
-radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o r600_cp.o
+radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o \
+	radeon_irq.o r300_cmdbuf.o r600_cp.o
+
+radeon-$(CONFIG_DRM_RADEON_KMS) += radeon_device.o radeon_kms.o \
+	radeon_atombios.o radeon_agp.o atombios_crtc.o radeon_combios.o \
+	atom.o radeon_fence.o radeon_ttm.o radeon_object.o radeon_gart.o \
+	radeon_legacy_crtc.o radeon_legacy_encoders.o radeon_connectors.o \
+	radeon_encoders.o radeon_display.o radeon_cursor.o radeon_i2c.o \
+	radeon_clocks.o radeon_fb.o radeon_gem.o radeon_ring.o radeon_irq_kms.o \
+	radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \
+	rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o
 
 radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
 
diff --git a/drivers/gpu/drm/radeon/ObjectID.h b/drivers/gpu/drm/radeon/ObjectID.h
new file mode 100644
index 00000000000..6d0183c61d3
--- /dev/null
+++ b/drivers/gpu/drm/radeon/ObjectID.h
@@ -0,0 +1,578 @@
+/*
+* Copyright 2006-2007 Advanced Micro Devices, Inc.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a
+* copy of this software and associated documentation files (the "Software"),
+* to deal in the Software without restriction, including without limitation
+* the rights to use, copy, modify, merge, publish, distribute, sublicense,
+* and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in
+* all copies or substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+* OTHER DEALINGS IN THE SOFTWARE.
+*/
+/* based on stg/asic_reg/drivers/inc/asic_reg/ObjectID.h ver 23 */
+
+#ifndef _OBJECTID_H
+#define _OBJECTID_H
+
+#if defined(_X86_)
+#pragma pack(1)
+#endif
+
+/****************************************************/
+/* Graphics Object Type Definition                  */
+/****************************************************/
+#define GRAPH_OBJECT_TYPE_NONE                    0x0
+#define GRAPH_OBJECT_TYPE_GPU                     0x1
+#define GRAPH_OBJECT_TYPE_ENCODER                 0x2
+#define GRAPH_OBJECT_TYPE_CONNECTOR               0x3
+#define GRAPH_OBJECT_TYPE_ROUTER                  0x4
+/* deleted */
+
+/****************************************************/
+/* Encoder Object ID Definition                     */
+/****************************************************/
+#define ENCODER_OBJECT_ID_NONE                    0x00
+
+/* Radeon Class Display Hardware */
+#define ENCODER_OBJECT_ID_INTERNAL_LVDS           0x01
+#define ENCODER_OBJECT_ID_INTERNAL_TMDS1          0x02
+#define ENCODER_OBJECT_ID_INTERNAL_TMDS2          0x03
+#define ENCODER_OBJECT_ID_INTERNAL_DAC1           0x04
+#define ENCODER_OBJECT_ID_INTERNAL_DAC2           0x05	/* TV/CV DAC */
+#define ENCODER_OBJECT_ID_INTERNAL_SDVOA          0x06
+#define ENCODER_OBJECT_ID_INTERNAL_SDVOB          0x07
+
+/* External Third Party Encoders */
+#define ENCODER_OBJECT_ID_SI170B                  0x08
+#define ENCODER_OBJECT_ID_CH7303                  0x09
+#define ENCODER_OBJECT_ID_CH7301                  0x0A
+#define ENCODER_OBJECT_ID_INTERNAL_DVO1           0x0B	/* This belongs to Radeon Class Display Hardware */
+#define ENCODER_OBJECT_ID_EXTERNAL_SDVOA          0x0C
+#define ENCODER_OBJECT_ID_EXTERNAL_SDVOB          0x0D
+#define ENCODER_OBJECT_ID_TITFP513                0x0E
+#define ENCODER_OBJECT_ID_INTERNAL_LVTM1          0x0F	/* not used for Radeon */
+#define ENCODER_OBJECT_ID_VT1623                  0x10
+#define ENCODER_OBJECT_ID_HDMI_SI1930             0x11
+#define ENCODER_OBJECT_ID_HDMI_INTERNAL           0x12
+/* Kaleidoscope (KLDSCP) Class Display Hardware (internal) */
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1   0x13
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1    0x14
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1    0x15
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2    0x16	/* Shared with CV/TV and CRT */
+#define ENCODER_OBJECT_ID_SI178                   0X17	/* External TMDS (dual link, no HDCP.) */
+#define ENCODER_OBJECT_ID_MVPU_FPGA               0x18	/* MVPU FPGA chip */
+#define ENCODER_OBJECT_ID_INTERNAL_DDI            0x19
+#define ENCODER_OBJECT_ID_VT1625                  0x1A
+#define ENCODER_OBJECT_ID_HDMI_SI1932             0x1B
+#define ENCODER_OBJECT_ID_DP_AN9801               0x1C
+#define ENCODER_OBJECT_ID_DP_DP501                0x1D
+#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY         0x1E
+#define ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA   0x1F
+#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY1        0x20
+#define ENCODER_OBJECT_ID_INTERNAL_UNIPHY2        0x21
+
+#define ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO    0xFF
+
+/****************************************************/
+/* Connector Object ID Definition                   */
+/****************************************************/
+#define CONNECTOR_OBJECT_ID_NONE                  0x00
+#define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I     0x01
+#define CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I       0x02
+#define CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D     0x03
+#define CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D       0x04
+#define CONNECTOR_OBJECT_ID_VGA                   0x05
+#define CONNECTOR_OBJECT_ID_COMPOSITE             0x06
+#define CONNECTOR_OBJECT_ID_SVIDEO                0x07
+#define CONNECTOR_OBJECT_ID_YPbPr                 0x08
+#define CONNECTOR_OBJECT_ID_D_CONNECTOR           0x09
+#define CONNECTOR_OBJECT_ID_9PIN_DIN              0x0A	/* Supports both CV & TV */
+#define CONNECTOR_OBJECT_ID_SCART                 0x0B
+#define CONNECTOR_OBJECT_ID_HDMI_TYPE_A           0x0C
+#define CONNECTOR_OBJECT_ID_HDMI_TYPE_B           0x0D
+#define CONNECTOR_OBJECT_ID_LVDS                  0x0E
+#define CONNECTOR_OBJECT_ID_7PIN_DIN              0x0F
+#define CONNECTOR_OBJECT_ID_PCIE_CONNECTOR        0x10
+#define CONNECTOR_OBJECT_ID_CROSSFIRE             0x11
+#define CONNECTOR_OBJECT_ID_HARDCODE_DVI          0x12
+#define CONNECTOR_OBJECT_ID_DISPLAYPORT           0x13
+
+/* deleted */
+
+/****************************************************/
+/* Router Object ID Definition                      */
+/****************************************************/
+#define ROUTER_OBJECT_ID_NONE											0x00
+#define ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL				0x01
+
+/****************************************************/
+/* Graphics Object ENUM ID Definition               */
+/****************************************************/
+#define GRAPH_OBJECT_ENUM_ID1                     0x01
+#define GRAPH_OBJECT_ENUM_ID2                     0x02
+#define GRAPH_OBJECT_ENUM_ID3                     0x03
+#define GRAPH_OBJECT_ENUM_ID4                     0x04
+#define GRAPH_OBJECT_ENUM_ID5                     0x05
+#define GRAPH_OBJECT_ENUM_ID6                     0x06
+
+/****************************************************/
+/* Graphics Object ID Bit definition                */
+/****************************************************/
+#define OBJECT_ID_MASK                            0x00FF
+#define ENUM_ID_MASK                              0x0700
+#define RESERVED1_ID_MASK                         0x0800
+#define OBJECT_TYPE_MASK                          0x7000
+#define RESERVED2_ID_MASK                         0x8000
+
+#define OBJECT_ID_SHIFT                           0x00
+#define ENUM_ID_SHIFT                             0x08
+#define OBJECT_TYPE_SHIFT                         0x0C
+
+/****************************************************/
+/* Graphics Object family definition                */
+/****************************************************/
+#define CONSTRUCTOBJECTFAMILYID(GRAPHICS_OBJECT_TYPE, GRAPHICS_OBJECT_ID) \
+	(GRAPHICS_OBJECT_TYPE << OBJECT_TYPE_SHIFT | \
+	 GRAPHICS_OBJECT_ID   << OBJECT_ID_SHIFT)
+/****************************************************/
+/* GPU Object ID definition - Shared with BIOS      */
+/****************************************************/
+#define GPU_ENUM_ID1	(GRAPH_OBJECT_TYPE_GPU << OBJECT_TYPE_SHIFT |\
+			 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT)
+
+/****************************************************/
+/* Encoder Object ID definition - Shared with BIOS  */
+/****************************************************/
+/*
+#define ENCODER_INTERNAL_LVDS_ENUM_ID1        0x2101
+#define ENCODER_INTERNAL_TMDS1_ENUM_ID1       0x2102
+#define ENCODER_INTERNAL_TMDS2_ENUM_ID1       0x2103
+#define ENCODER_INTERNAL_DAC1_ENUM_ID1        0x2104
+#define ENCODER_INTERNAL_DAC2_ENUM_ID1        0x2105
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID1       0x2106
+#define ENCODER_INTERNAL_SDVOB_ENUM_ID1       0x2107
+#define ENCODER_SIL170B_ENUM_ID1              0x2108
+#define ENCODER_CH7303_ENUM_ID1               0x2109
+#define ENCODER_CH7301_ENUM_ID1               0x210A
+#define ENCODER_INTERNAL_DVO1_ENUM_ID1        0x210B
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1       0x210C
+#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1       0x210D
+#define ENCODER_TITFP513_ENUM_ID1             0x210E
+#define ENCODER_INTERNAL_LVTM1_ENUM_ID1       0x210F
+#define ENCODER_VT1623_ENUM_ID1               0x2110
+#define ENCODER_HDMI_SI1930_ENUM_ID1          0x2111
+#define ENCODER_HDMI_INTERNAL_ENUM_ID1        0x2112
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1   0x2113
+#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1    0x2114
+#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1    0x2115
+#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1    0x2116
+#define ENCODER_SI178_ENUM_ID1                   0x2117
+#define ENCODER_MVPU_FPGA_ENUM_ID1               0x2118
+#define ENCODER_INTERNAL_DDI_ENUM_ID1            0x2119
+#define ENCODER_VT1625_ENUM_ID1                  0x211A
+#define ENCODER_HDMI_SI1932_ENUM_ID1             0x211B
+#define ENCODER_ENCODER_DP_AN9801_ENUM_ID1       0x211C
+#define ENCODER_DP_DP501_ENUM_ID1                0x211D
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1         0x211E
+*/
+#define ENCODER_INTERNAL_LVDS_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_LVDS << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_TMDS1_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_TMDS1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_TMDS2_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_TMDS2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DAC1_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_DAC1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DAC2_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_DAC2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOA_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_SDVOB_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_SDVOB << OBJECT_ID_SHIFT)
+
+#define ENCODER_SIL170B_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_SI170B << OBJECT_ID_SHIFT)
+
+#define ENCODER_CH7303_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_CH7303 << OBJECT_ID_SHIFT)
+
+#define ENCODER_CH7301_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_CH7301 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DVO1_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_DVO1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_EXTERNAL_SDVOA_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_EXTERNAL_SDVOA << OBJECT_ID_SHIFT)
+
+#define ENCODER_EXTERNAL_SDVOB_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_EXTERNAL_SDVOB << OBJECT_ID_SHIFT)
+
+#define ENCODER_TITFP513_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_TITFP513 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_LVTM1_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_LVTM1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_VT1623_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_VT1623 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_SI1930_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_HDMI_SI1930 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_INTERNAL_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_HDMI_INTERNAL << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_TMDS1_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_DVO1_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_DAC1_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_DAC2_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2 << OBJECT_ID_SHIFT) /* Shared with CV/TV and CRT */
+
+#define ENCODER_SI178_ENUM_ID1  \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_SI178 << OBJECT_ID_SHIFT)
+
+#define ENCODER_MVPU_FPGA_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_MVPU_FPGA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_DDI_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_DDI << OBJECT_ID_SHIFT)
+
+#define ENCODER_VT1625_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_VT1625 << OBJECT_ID_SHIFT)
+
+#define ENCODER_HDMI_SI1932_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_HDMI_SI1932 << OBJECT_ID_SHIFT)
+
+#define ENCODER_DP_DP501_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_DP_DP501 << OBJECT_ID_SHIFT)
+
+#define ENCODER_DP_AN9801_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_DP_AN9801 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_UNIPHY << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_KLDSCP_LVTMA_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY1_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_UNIPHY1 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_INTERNAL_UNIPHY2_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_INTERNAL_UNIPHY2 << OBJECT_ID_SHIFT)
+
+#define ENCODER_GENERAL_EXTERNAL_DVO_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ENCODER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ENCODER_OBJECT_ID_GENERAL_EXTERNAL_DVO << OBJECT_ID_SHIFT)
+
+/****************************************************/
+/* Connector Object ID definition - Shared with BIOS */
+/****************************************************/
+/*
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1        0x3101
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1          0x3102
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1        0x3103
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1          0x3104
+#define CONNECTOR_VGA_ENUM_ID1                      0x3105
+#define CONNECTOR_COMPOSITE_ENUM_ID1                0x3106
+#define CONNECTOR_SVIDEO_ENUM_ID1                   0x3107
+#define CONNECTOR_YPbPr_ENUM_ID1                    0x3108
+#define CONNECTOR_D_CONNECTORE_ENUM_ID1             0x3109
+#define CONNECTOR_9PIN_DIN_ENUM_ID1                 0x310A
+#define CONNECTOR_SCART_ENUM_ID1                    0x310B
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1              0x310C
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1              0x310D
+#define CONNECTOR_LVDS_ENUM_ID1                     0x310E
+#define CONNECTOR_7PIN_DIN_ENUM_ID1                 0x310F
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1           0x3110
+*/
+#define CONNECTOR_LVDS_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_LVDS << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_I_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_I_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SINGLE_LINK_DVI_D_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DUAL_LINK_DVI_D_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_VGA_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_VGA_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_VGA << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_COMPOSITE_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_COMPOSITE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SVIDEO_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_SVIDEO << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_YPbPr_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_YPbPr << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_D_CONNECTOR_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_D_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_9PIN_DIN_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_9PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_SCART_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_SCART << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_A_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_HDMI_TYPE_A << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HDMI_TYPE_B_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_HDMI_TYPE_B << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_7PIN_DIN_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_7PIN_DIN << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_PCIE_CONNECTOR_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_PCIE_CONNECTOR << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_CROSSFIRE_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_CROSSFIRE_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_CROSSFIRE << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HARDCODE_DVI_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_HARDCODE_DVI_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_HARDCODE_DVI << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID2 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID2 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID3 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID3 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+#define CONNECTOR_DISPLAYPORT_ENUM_ID4 \
+	(GRAPH_OBJECT_TYPE_CONNECTOR << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID4 << ENUM_ID_SHIFT |\
+	 CONNECTOR_OBJECT_ID_DISPLAYPORT << OBJECT_ID_SHIFT)
+
+/****************************************************/
+/* Router Object ID definition - Shared with BIOS   */
+/****************************************************/
+#define ROUTER_I2C_EXTENDER_CNTL_ENUM_ID1 \
+	(GRAPH_OBJECT_TYPE_ROUTER << OBJECT_TYPE_SHIFT |\
+	 GRAPH_OBJECT_ENUM_ID1 << ENUM_ID_SHIFT |\
+	 ROUTER_OBJECT_ID_I2C_EXTENDER_CNTL << OBJECT_ID_SHIFT)
+
+/* deleted */
+
+/****************************************************/
+/* Object Cap definition - Shared with BIOS         */
+/****************************************************/
+#define GRAPHICS_OBJECT_CAP_I2C                 0x00000001L
+#define GRAPHICS_OBJECT_CAP_TABLE_ID            0x00000002L
+
+#define GRAPHICS_OBJECT_I2CCOMMAND_TABLE_ID                   0x01
+#define GRAPHICS_OBJECT_HOTPLUGDETECTIONINTERUPT_TABLE_ID     0x02
+#define GRAPHICS_OBJECT_ENCODER_OUTPUT_PROTECTION_TABLE_ID    0x03
+
+#if defined(_X86_)
+#pragma pack()
+#endif
+
+#endif /*GRAPHICTYPE */
diff --git a/drivers/gpu/drm/radeon/atom-bits.h b/drivers/gpu/drm/radeon/atom-bits.h
new file mode 100644
index 00000000000..e8fae5c7751
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atom-bits.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Stanislaw Skowronek
+ */
+
+#ifndef ATOM_BITS_H
+#define ATOM_BITS_H
+
+static inline uint8_t get_u8(void *bios, int ptr)
+{
+    return ((unsigned char *)bios)[ptr];
+}
+#define U8(ptr) get_u8(ctx->ctx->bios, (ptr))
+#define CU8(ptr) get_u8(ctx->bios, (ptr))
+static inline uint16_t get_u16(void *bios, int ptr)
+{
+    return get_u8(bios ,ptr)|(((uint16_t)get_u8(bios, ptr+1))<<8);
+}
+#define U16(ptr) get_u16(ctx->ctx->bios, (ptr))
+#define CU16(ptr) get_u16(ctx->bios, (ptr))
+static inline uint32_t get_u32(void *bios, int ptr)
+{
+    return get_u16(bios, ptr)|(((uint32_t)get_u16(bios, ptr+2))<<16);
+}
+#define U32(ptr) get_u32(ctx->ctx->bios, (ptr))
+#define CU32(ptr) get_u32(ctx->bios, (ptr))
+#define CSTR(ptr) (((char *)(ctx->bios))+(ptr))
+
+#endif
diff --git a/drivers/gpu/drm/radeon/atom-names.h b/drivers/gpu/drm/radeon/atom-names.h
new file mode 100644
index 00000000000..6f907a5ffa5
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atom-names.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Stanislaw Skowronek
+ */
+
+#ifndef ATOM_NAMES_H
+#define ATOM_NAMES_H
+
+#include "atom.h"
+
+#ifdef ATOM_DEBUG
+
+#define ATOM_OP_NAMES_CNT 123
+static char *atom_op_names[ATOM_OP_NAMES_CNT] = {
+"RESERVED", "MOVE_REG", "MOVE_PS", "MOVE_WS", "MOVE_FB", "MOVE_PLL",
+"MOVE_MC", "AND_REG", "AND_PS", "AND_WS", "AND_FB", "AND_PLL", "AND_MC",
+"OR_REG", "OR_PS", "OR_WS", "OR_FB", "OR_PLL", "OR_MC", "SHIFT_LEFT_REG",
+"SHIFT_LEFT_PS", "SHIFT_LEFT_WS", "SHIFT_LEFT_FB", "SHIFT_LEFT_PLL",
+"SHIFT_LEFT_MC", "SHIFT_RIGHT_REG", "SHIFT_RIGHT_PS", "SHIFT_RIGHT_WS",
+"SHIFT_RIGHT_FB", "SHIFT_RIGHT_PLL", "SHIFT_RIGHT_MC", "MUL_REG",
+"MUL_PS", "MUL_WS", "MUL_FB", "MUL_PLL", "MUL_MC", "DIV_REG", "DIV_PS",
+"DIV_WS", "DIV_FB", "DIV_PLL", "DIV_MC", "ADD_REG", "ADD_PS", "ADD_WS",
+"ADD_FB", "ADD_PLL", "ADD_MC", "SUB_REG", "SUB_PS", "SUB_WS", "SUB_FB",
+"SUB_PLL", "SUB_MC", "SET_ATI_PORT", "SET_PCI_PORT", "SET_SYS_IO_PORT",
+"SET_REG_BLOCK", "SET_FB_BASE", "COMPARE_REG", "COMPARE_PS",
+"COMPARE_WS", "COMPARE_FB", "COMPARE_PLL", "COMPARE_MC", "SWITCH",
+"JUMP", "JUMP_EQUAL", "JUMP_BELOW", "JUMP_ABOVE", "JUMP_BELOW_OR_EQUAL",
+"JUMP_ABOVE_OR_EQUAL", "JUMP_NOT_EQUAL", "TEST_REG", "TEST_PS", "TEST_WS",
+"TEST_FB", "TEST_PLL", "TEST_MC", "DELAY_MILLISEC", "DELAY_MICROSEC",
+"CALL_TABLE", "REPEAT", "CLEAR_REG", "CLEAR_PS", "CLEAR_WS", "CLEAR_FB",
+"CLEAR_PLL", "CLEAR_MC", "NOP", "EOT", "MASK_REG", "MASK_PS", "MASK_WS",
+"MASK_FB", "MASK_PLL", "MASK_MC", "POST_CARD", "BEEP", "SAVE_REG",
+"RESTORE_REG", "SET_DATA_BLOCK", "XOR_REG", "XOR_PS", "XOR_WS", "XOR_FB",
+"XOR_PLL", "XOR_MC", "SHL_REG", "SHL_PS", "SHL_WS", "SHL_FB", "SHL_PLL",
+"SHL_MC", "SHR_REG", "SHR_PS", "SHR_WS", "SHR_FB", "SHR_PLL", "SHR_MC",
+"DEBUG", "CTB_DS",
+};
+
+#define ATOM_TABLE_NAMES_CNT 74
+static char *atom_table_names[ATOM_TABLE_NAMES_CNT] = {
+"ASIC_Init", "GetDisplaySurfaceSize", "ASIC_RegistersInit",
+"VRAM_BlockVenderDetection", "SetClocksRatio", "MemoryControllerInit",
+"GPIO_PinInit", "MemoryParamAdjust", "DVOEncoderControl",
+"GPIOPinControl", "SetEngineClock", "SetMemoryClock", "SetPixelClock",
+"DynamicClockGating", "ResetMemoryDLL", "ResetMemoryDevice",
+"MemoryPLLInit", "EnableMemorySelfRefresh", "AdjustMemoryController",
+"EnableASIC_StaticPwrMgt", "ASIC_StaticPwrMgtStatusChange",
+"DAC_LoadDetection", "TMDS2EncoderControl", "LCD1OutputControl",
+"DAC1EncoderControl", "DAC2EncoderControl", "DVOOutputControl",
+"CV1OutputControl", "SetCRTC_DPM_State", "TVEncoderControl",
+"TMDS1EncoderControl", "LVDSEncoderControl", "TV1OutputControl",
+"EnableScaler", "BlankCRTC", "EnableCRTC", "GetPixelClock",
+"EnableVGA_Render", "EnableVGA_Access", "SetCRTC_Timing",
+"SetCRTC_OverScan", "SetCRTC_Replication", "SelectCRTC_Source",
+"EnableGraphSurfaces", "UpdateCRTC_DoubleBufferRegisters",
+"LUT_AutoFill", "EnableHW_IconCursor", "GetMemoryClock",
+"GetEngineClock", "SetCRTC_UsingDTDTiming", "TVBootUpStdPinDetection",
+"DFP2OutputControl", "VRAM_BlockDetectionByStrap", "MemoryCleanUp",
+"ReadEDIDFromHWAssistedI2C", "WriteOneByteToHWAssistedI2C",
+"ReadHWAssistedI2CStatus", "SpeedFanControl", "PowerConnectorDetection",
+"MC_Synchronization", "ComputeMemoryEnginePLL", "MemoryRefreshConversion",
+"VRAM_GetCurrentInfoBlock", "DynamicMemorySettings", "MemoryTraining",
+"EnableLVDS_SS", "DFP1OutputControl", "SetVoltage", "CRT1OutputControl",
+"CRT2OutputControl", "SetupHWAssistedI2CStatus", "ClockSource",
+"MemoryDeviceInit", "EnableYUV",
+};
+
+#define ATOM_IO_NAMES_CNT 5
+static char *atom_io_names[ATOM_IO_NAMES_CNT] = {
+"MM", "PLL", "MC", "PCIE", "PCIE PORT",
+};
+
+#else
+
+#define ATOM_OP_NAMES_CNT 0
+#define ATOM_TABLE_NAMES_CNT 0
+#define ATOM_IO_NAMES_CNT 0
+
+#endif
+
+#endif
diff --git a/drivers/gpu/drm/radeon/atom-types.h b/drivers/gpu/drm/radeon/atom-types.h
new file mode 100644
index 00000000000..1125b866cdb
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atom-types.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Dave Airlie
+ */
+
+#ifndef ATOM_TYPES_H
+#define ATOM_TYPES_H
+
+/* sync atom types to kernel types */
+
+typedef uint16_t USHORT;
+typedef uint32_t ULONG;
+typedef uint8_t UCHAR;
+
+
+#ifndef ATOM_BIG_ENDIAN
+#if defined(__BIG_ENDIAN)
+#define ATOM_BIG_ENDIAN 1
+#else
+#define ATOM_BIG_ENDIAN 0
+#endif
+#endif
+#endif
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
new file mode 100644
index 00000000000..901befe03da
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -0,0 +1,1215 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Stanislaw Skowronek
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+
+#define ATOM_DEBUG
+
+#include "atom.h"
+#include "atom-names.h"
+#include "atom-bits.h"
+
+#define ATOM_COND_ABOVE		0
+#define ATOM_COND_ABOVEOREQUAL	1
+#define ATOM_COND_ALWAYS	2
+#define ATOM_COND_BELOW		3
+#define ATOM_COND_BELOWOREQUAL	4
+#define ATOM_COND_EQUAL		5
+#define ATOM_COND_NOTEQUAL	6
+
+#define ATOM_PORT_ATI	0
+#define ATOM_PORT_PCI	1
+#define ATOM_PORT_SYSIO	2
+
+#define ATOM_UNIT_MICROSEC	0
+#define ATOM_UNIT_MILLISEC	1
+
+#define PLL_INDEX	2
+#define PLL_DATA	3
+
+typedef struct {
+	struct atom_context *ctx;
+
+	uint32_t *ps, *ws;
+	int ps_shift;
+	uint16_t start;
+} atom_exec_context;
+
+int atom_debug = 0;
+void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params);
+
+static uint32_t atom_arg_mask[8] =
+    { 0xFFFFFFFF, 0xFFFF, 0xFFFF00, 0xFFFF0000, 0xFF, 0xFF00, 0xFF0000,
+0xFF000000 };
+static int atom_arg_shift[8] = { 0, 0, 8, 16, 0, 8, 16, 24 };
+
+static int atom_dst_to_src[8][4] = {
+	/* translate destination alignment field to the source alignment encoding */
+	{0, 0, 0, 0},
+	{1, 2, 3, 0},
+	{1, 2, 3, 0},
+	{1, 2, 3, 0},
+	{4, 5, 6, 7},
+	{4, 5, 6, 7},
+	{4, 5, 6, 7},
+	{4, 5, 6, 7},
+};
+static int atom_def_dst[8] = { 0, 0, 1, 2, 0, 1, 2, 3 };
+
+static int debug_depth = 0;
+#ifdef ATOM_DEBUG
+static void debug_print_spaces(int n)
+{
+	while (n--)
+		printk("   ");
+}
+
+#define DEBUG(...) do if (atom_debug) { printk(KERN_DEBUG __VA_ARGS__); } while (0)
+#define SDEBUG(...) do if (atom_debug) { printk(KERN_DEBUG); debug_print_spaces(debug_depth); printk(__VA_ARGS__); } while (0)
+#else
+#define DEBUG(...) do { } while (0)
+#define SDEBUG(...) do { } while (0)
+#endif
+
+static uint32_t atom_iio_execute(struct atom_context *ctx, int base,
+				 uint32_t index, uint32_t data)
+{
+	uint32_t temp = 0xCDCDCDCD;
+	while (1)
+		switch (CU8(base)) {
+		case ATOM_IIO_NOP:
+			base++;
+			break;
+		case ATOM_IIO_READ:
+			temp = ctx->card->reg_read(ctx->card, CU16(base + 1));
+			base += 3;
+			break;
+		case ATOM_IIO_WRITE:
+			ctx->card->reg_write(ctx->card, CU16(base + 1), temp);
+			base += 3;
+			break;
+		case ATOM_IIO_CLEAR:
+			temp &=
+			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
+			      CU8(base + 2));
+			base += 3;
+			break;
+		case ATOM_IIO_SET:
+			temp |=
+			    (0xFFFFFFFF >> (32 - CU8(base + 1))) << CU8(base +
+									2);
+			base += 3;
+			break;
+		case ATOM_IIO_MOVE_INDEX:
+			temp &=
+			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
+			      CU8(base + 2));
+			temp |=
+			    ((index >> CU8(base + 2)) &
+			     (0xFFFFFFFF >> (32 - CU8(base + 1)))) << CU8(base +
+									  3);
+			base += 4;
+			break;
+		case ATOM_IIO_MOVE_DATA:
+			temp &=
+			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
+			      CU8(base + 2));
+			temp |=
+			    ((data >> CU8(base + 2)) &
+			     (0xFFFFFFFF >> (32 - CU8(base + 1)))) << CU8(base +
+									  3);
+			base += 4;
+			break;
+		case ATOM_IIO_MOVE_ATTR:
+			temp &=
+			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
+			      CU8(base + 2));
+			temp |=
+			    ((ctx->
+			      io_attr >> CU8(base + 2)) & (0xFFFFFFFF >> (32 -
+									  CU8
+									  (base
+									   +
+									   1))))
+			    << CU8(base + 3);
+			base += 4;
+			break;
+		case ATOM_IIO_END:
+			return temp;
+		default:
+			printk(KERN_INFO "Unknown IIO opcode.\n");
+			return 0;
+		}
+}
+
+static uint32_t atom_get_src_int(atom_exec_context *ctx, uint8_t attr,
+				 int *ptr, uint32_t *saved, int print)
+{
+	uint32_t idx, val = 0xCDCDCDCD, align, arg;
+	struct atom_context *gctx = ctx->ctx;
+	arg = attr & 7;
+	align = (attr >> 3) & 7;
+	switch (arg) {
+	case ATOM_ARG_REG:
+		idx = U16(*ptr);
+		(*ptr) += 2;
+		if (print)
+			DEBUG("REG[0x%04X]", idx);
+		idx += gctx->reg_block;
+		switch (gctx->io_mode) {
+		case ATOM_IO_MM:
+			val = gctx->card->reg_read(gctx->card, idx);
+			break;
+		case ATOM_IO_PCI:
+			printk(KERN_INFO
+			       "PCI registers are not implemented.\n");
+			return 0;
+		case ATOM_IO_SYSIO:
+			printk(KERN_INFO
+			       "SYSIO registers are not implemented.\n");
+			return 0;
+		default:
+			if (!(gctx->io_mode & 0x80)) {
+				printk(KERN_INFO "Bad IO mode.\n");
+				return 0;
+			}
+			if (!gctx->iio[gctx->io_mode & 0x7F]) {
+				printk(KERN_INFO
+				       "Undefined indirect IO read method %d.\n",
+				       gctx->io_mode & 0x7F);
+				return 0;
+			}
+			val =
+			    atom_iio_execute(gctx,
+					     gctx->iio[gctx->io_mode & 0x7F],
+					     idx, 0);
+		}
+		break;
+	case ATOM_ARG_PS:
+		idx = U8(*ptr);
+		(*ptr)++;
+		val = le32_to_cpu(ctx->ps[idx]);
+		if (print)
+			DEBUG("PS[0x%02X,0x%04X]", idx, val);
+		break;
+	case ATOM_ARG_WS:
+		idx = U8(*ptr);
+		(*ptr)++;
+		if (print)
+			DEBUG("WS[0x%02X]", idx);
+		switch (idx) {
+		case ATOM_WS_QUOTIENT:
+			val = gctx->divmul[0];
+			break;
+		case ATOM_WS_REMAINDER:
+			val = gctx->divmul[1];
+			break;
+		case ATOM_WS_DATAPTR:
+			val = gctx->data_block;
+			break;
+		case ATOM_WS_SHIFT:
+			val = gctx->shift;
+			break;
+		case ATOM_WS_OR_MASK:
+			val = 1 << gctx->shift;
+			break;
+		case ATOM_WS_AND_MASK:
+			val = ~(1 << gctx->shift);
+			break;
+		case ATOM_WS_FB_WINDOW:
+			val = gctx->fb_base;
+			break;
+		case ATOM_WS_ATTRIBUTES:
+			val = gctx->io_attr;
+			break;
+		default:
+			val = ctx->ws[idx];
+		}
+		break;
+	case ATOM_ARG_ID:
+		idx = U16(*ptr);
+		(*ptr) += 2;
+		if (print) {
+			if (gctx->data_block)
+				DEBUG("ID[0x%04X+%04X]", idx, gctx->data_block);
+			else
+				DEBUG("ID[0x%04X]", idx);
+		}
+		val = U32(idx + gctx->data_block);
+		break;
+	case ATOM_ARG_FB:
+		idx = U8(*ptr);
+		(*ptr)++;
+		if (print)
+			DEBUG("FB[0x%02X]", idx);
+		printk(KERN_INFO "FB access is not implemented.\n");
+		return 0;
+	case ATOM_ARG_IMM:
+		switch (align) {
+		case ATOM_SRC_DWORD:
+			val = U32(*ptr);
+			(*ptr) += 4;
+			if (print)
+				DEBUG("IMM 0x%08X\n", val);
+			return val;
+		case ATOM_SRC_WORD0:
+		case ATOM_SRC_WORD8:
+		case ATOM_SRC_WORD16:
+			val = U16(*ptr);
+			(*ptr) += 2;
+			if (print)
+				DEBUG("IMM 0x%04X\n", val);
+			return val;
+		case ATOM_SRC_BYTE0:
+		case ATOM_SRC_BYTE8:
+		case ATOM_SRC_BYTE16:
+		case ATOM_SRC_BYTE24:
+			val = U8(*ptr);
+			(*ptr)++;
+			if (print)
+				DEBUG("IMM 0x%02X\n", val);
+			return val;
+		}
+		return 0;
+	case ATOM_ARG_PLL:
+		idx = U8(*ptr);
+		(*ptr)++;
+		if (print)
+			DEBUG("PLL[0x%02X]", idx);
+		val = gctx->card->pll_read(gctx->card, idx);
+		break;
+	case ATOM_ARG_MC:
+		idx = U8(*ptr);
+		(*ptr)++;
+		if (print)
+			DEBUG("MC[0x%02X]", idx);
+		val = gctx->card->mc_read(gctx->card, idx);
+		break;
+	}
+	if (saved)
+		*saved = val;
+	val &= atom_arg_mask[align];
+	val >>= atom_arg_shift[align];
+	if (print)
+		switch (align) {
+		case ATOM_SRC_DWORD:
+			DEBUG(".[31:0] -> 0x%08X\n", val);
+			break;
+		case ATOM_SRC_WORD0:
+			DEBUG(".[15:0] -> 0x%04X\n", val);
+			break;
+		case ATOM_SRC_WORD8:
+			DEBUG(".[23:8] -> 0x%04X\n", val);
+			break;
+		case ATOM_SRC_WORD16:
+			DEBUG(".[31:16] -> 0x%04X\n", val);
+			break;
+		case ATOM_SRC_BYTE0:
+			DEBUG(".[7:0] -> 0x%02X\n", val);
+			break;
+		case ATOM_SRC_BYTE8:
+			DEBUG(".[15:8] -> 0x%02X\n", val);
+			break;
+		case ATOM_SRC_BYTE16:
+			DEBUG(".[23:16] -> 0x%02X\n", val);
+			break;
+		case ATOM_SRC_BYTE24:
+			DEBUG(".[31:24] -> 0x%02X\n", val);
+			break;
+		}
+	return val;
+}
+
+static void atom_skip_src_int(atom_exec_context *ctx, uint8_t attr, int *ptr)
+{
+	uint32_t align = (attr >> 3) & 7, arg = attr & 7;
+	switch (arg) {
+	case ATOM_ARG_REG:
+	case ATOM_ARG_ID:
+		(*ptr) += 2;
+		break;
+	case ATOM_ARG_PLL:
+	case ATOM_ARG_MC:
+	case ATOM_ARG_PS:
+	case ATOM_ARG_WS:
+	case ATOM_ARG_FB:
+		(*ptr)++;
+		break;
+	case ATOM_ARG_IMM:
+		switch (align) {
+		case ATOM_SRC_DWORD:
+			(*ptr) += 4;
+			return;
+		case ATOM_SRC_WORD0:
+		case ATOM_SRC_WORD8:
+		case ATOM_SRC_WORD16:
+			(*ptr) += 2;
+			return;
+		case ATOM_SRC_BYTE0:
+		case ATOM_SRC_BYTE8:
+		case ATOM_SRC_BYTE16:
+		case ATOM_SRC_BYTE24:
+			(*ptr)++;
+			return;
+		}
+		return;
+	}
+}
+
+static uint32_t atom_get_src(atom_exec_context *ctx, uint8_t attr, int *ptr)
+{
+	return atom_get_src_int(ctx, attr, ptr, NULL, 1);
+}
+
+static uint32_t atom_get_dst(atom_exec_context *ctx, int arg, uint8_t attr,
+			     int *ptr, uint32_t *saved, int print)
+{
+	return atom_get_src_int(ctx,
+				arg | atom_dst_to_src[(attr >> 3) &
+						      7][(attr >> 6) & 3] << 3,
+				ptr, saved, print);
+}
+
+static void atom_skip_dst(atom_exec_context *ctx, int arg, uint8_t attr, int *ptr)
+{
+	atom_skip_src_int(ctx,
+			  arg | atom_dst_to_src[(attr >> 3) & 7][(attr >> 6) &
+								 3] << 3, ptr);
+}
+
+static void atom_put_dst(atom_exec_context *ctx, int arg, uint8_t attr,
+			 int *ptr, uint32_t val, uint32_t saved)
+{
+	uint32_t align =
+	    atom_dst_to_src[(attr >> 3) & 7][(attr >> 6) & 3], old_val =
+	    val, idx;
+	struct atom_context *gctx = ctx->ctx;
+	old_val &= atom_arg_mask[align] >> atom_arg_shift[align];
+	val <<= atom_arg_shift[align];
+	val &= atom_arg_mask[align];
+	saved &= ~atom_arg_mask[align];
+	val |= saved;
+	switch (arg) {
+	case ATOM_ARG_REG:
+		idx = U16(*ptr);
+		(*ptr) += 2;
+		DEBUG("REG[0x%04X]", idx);
+		idx += gctx->reg_block;
+		switch (gctx->io_mode) {
+		case ATOM_IO_MM:
+			if (idx == 0)
+				gctx->card->reg_write(gctx->card, idx,
+						      val << 2);
+			else
+				gctx->card->reg_write(gctx->card, idx, val);
+			break;
+		case ATOM_IO_PCI:
+			printk(KERN_INFO
+			       "PCI registers are not implemented.\n");
+			return;
+		case ATOM_IO_SYSIO:
+			printk(KERN_INFO
+			       "SYSIO registers are not implemented.\n");
+			return;
+		default:
+			if (!(gctx->io_mode & 0x80)) {
+				printk(KERN_INFO "Bad IO mode.\n");
+				return;
+			}
+			if (!gctx->iio[gctx->io_mode & 0xFF]) {
+				printk(KERN_INFO
+				       "Undefined indirect IO write method %d.\n",
+				       gctx->io_mode & 0x7F);
+				return;
+			}
+			atom_iio_execute(gctx, gctx->iio[gctx->io_mode & 0xFF],
+					 idx, val);
+		}
+		break;
+	case ATOM_ARG_PS:
+		idx = U8(*ptr);
+		(*ptr)++;
+		DEBUG("PS[0x%02X]", idx);
+		ctx->ps[idx] = cpu_to_le32(val);
+		break;
+	case ATOM_ARG_WS:
+		idx = U8(*ptr);
+		(*ptr)++;
+		DEBUG("WS[0x%02X]", idx);
+		switch (idx) {
+		case ATOM_WS_QUOTIENT:
+			gctx->divmul[0] = val;
+			break;
+		case ATOM_WS_REMAINDER:
+			gctx->divmul[1] = val;
+			break;
+		case ATOM_WS_DATAPTR:
+			gctx->data_block = val;
+			break;
+		case ATOM_WS_SHIFT:
+			gctx->shift = val;
+			break;
+		case ATOM_WS_OR_MASK:
+		case ATOM_WS_AND_MASK:
+			break;
+		case ATOM_WS_FB_WINDOW:
+			gctx->fb_base = val;
+			break;
+		case ATOM_WS_ATTRIBUTES:
+			gctx->io_attr = val;
+			break;
+		default:
+			ctx->ws[idx] = val;
+		}
+		break;
+	case ATOM_ARG_FB:
+		idx = U8(*ptr);
+		(*ptr)++;
+		DEBUG("FB[0x%02X]", idx);
+		printk(KERN_INFO "FB access is not implemented.\n");
+		return;
+	case ATOM_ARG_PLL:
+		idx = U8(*ptr);
+		(*ptr)++;
+		DEBUG("PLL[0x%02X]", idx);
+		gctx->card->pll_write(gctx->card, idx, val);
+		break;
+	case ATOM_ARG_MC:
+		idx = U8(*ptr);
+		(*ptr)++;
+		DEBUG("MC[0x%02X]", idx);
+		gctx->card->mc_write(gctx->card, idx, val);
+		return;
+	}
+	switch (align) {
+	case ATOM_SRC_DWORD:
+		DEBUG(".[31:0] <- 0x%08X\n", old_val);
+		break;
+	case ATOM_SRC_WORD0:
+		DEBUG(".[15:0] <- 0x%04X\n", old_val);
+		break;
+	case ATOM_SRC_WORD8:
+		DEBUG(".[23:8] <- 0x%04X\n", old_val);
+		break;
+	case ATOM_SRC_WORD16:
+		DEBUG(".[31:16] <- 0x%04X\n", old_val);
+		break;
+	case ATOM_SRC_BYTE0:
+		DEBUG(".[7:0] <- 0x%02X\n", old_val);
+		break;
+	case ATOM_SRC_BYTE8:
+		DEBUG(".[15:8] <- 0x%02X\n", old_val);
+		break;
+	case ATOM_SRC_BYTE16:
+		DEBUG(".[23:16] <- 0x%02X\n", old_val);
+		break;
+	case ATOM_SRC_BYTE24:
+		DEBUG(".[31:24] <- 0x%02X\n", old_val);
+		break;
+	}
+}
+
+static void atom_op_add(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src, saved;
+	int dptr = *ptr;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	SDEBUG("   src: ");
+	src = atom_get_src(ctx, attr, ptr);
+	dst += src;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_and(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src, saved;
+	int dptr = *ptr;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	SDEBUG("   src: ");
+	src = atom_get_src(ctx, attr, ptr);
+	dst &= src;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_beep(atom_exec_context *ctx, int *ptr, int arg)
+{
+	printk("ATOM BIOS beeped!\n");
+}
+
+static void atom_op_calltable(atom_exec_context *ctx, int *ptr, int arg)
+{
+	int idx = U8((*ptr)++);
+	if (idx < ATOM_TABLE_NAMES_CNT)
+		SDEBUG("   table: %d (%s)\n", idx, atom_table_names[idx]);
+	else
+		SDEBUG("   table: %d\n", idx);
+	if (U16(ctx->ctx->cmd_table + 4 + 2 * idx))
+		atom_execute_table(ctx->ctx, idx, ctx->ps + ctx->ps_shift);
+}
+
+static void atom_op_clear(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t saved;
+	int dptr = *ptr;
+	attr &= 0x38;
+	attr |= atom_def_dst[attr >> 3] << 6;
+	atom_get_dst(ctx, arg, attr, ptr, &saved, 0);
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, 0, saved);
+}
+
+static void atom_op_compare(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src;
+	SDEBUG("   src1: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, NULL, 1);
+	SDEBUG("   src2: ");
+	src = atom_get_src(ctx, attr, ptr);
+	ctx->ctx->cs_equal = (dst == src);
+	ctx->ctx->cs_above = (dst > src);
+	SDEBUG("   result: %s %s\n", ctx->ctx->cs_equal ? "EQ" : "NE",
+	       ctx->ctx->cs_above ? "GT" : "LE");
+}
+
+static void atom_op_delay(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t count = U8((*ptr)++);
+	SDEBUG("   count: %d\n", count);
+	if (arg == ATOM_UNIT_MICROSEC)
+		schedule_timeout_uninterruptible(usecs_to_jiffies(count));
+	else
+		schedule_timeout_uninterruptible(msecs_to_jiffies(count));
+}
+
+static void atom_op_div(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src;
+	SDEBUG("   src1: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, NULL, 1);
+	SDEBUG("   src2: ");
+	src = atom_get_src(ctx, attr, ptr);
+	if (src != 0) {
+		ctx->ctx->divmul[0] = dst / src;
+		ctx->ctx->divmul[1] = dst % src;
+	} else {
+		ctx->ctx->divmul[0] = 0;
+		ctx->ctx->divmul[1] = 0;
+	}
+}
+
+static void atom_op_eot(atom_exec_context *ctx, int *ptr, int arg)
+{
+	/* functionally, a nop */
+}
+
+static void atom_op_jump(atom_exec_context *ctx, int *ptr, int arg)
+{
+	int execute = 0, target = U16(*ptr);
+	(*ptr) += 2;
+	switch (arg) {
+	case ATOM_COND_ABOVE:
+		execute = ctx->ctx->cs_above;
+		break;
+	case ATOM_COND_ABOVEOREQUAL:
+		execute = ctx->ctx->cs_above || ctx->ctx->cs_equal;
+		break;
+	case ATOM_COND_ALWAYS:
+		execute = 1;
+		break;
+	case ATOM_COND_BELOW:
+		execute = !(ctx->ctx->cs_above || ctx->ctx->cs_equal);
+		break;
+	case ATOM_COND_BELOWOREQUAL:
+		execute = !ctx->ctx->cs_above;
+		break;
+	case ATOM_COND_EQUAL:
+		execute = ctx->ctx->cs_equal;
+		break;
+	case ATOM_COND_NOTEQUAL:
+		execute = !ctx->ctx->cs_equal;
+		break;
+	}
+	if (arg != ATOM_COND_ALWAYS)
+		SDEBUG("   taken: %s\n", execute ? "yes" : "no");
+	SDEBUG("   target: 0x%04X\n", target);
+	if (execute)
+		*ptr = ctx->start + target;
+}
+
+static void atom_op_mask(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src1, src2, saved;
+	int dptr = *ptr;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	SDEBUG("   src1: ");
+	src1 = atom_get_src(ctx, attr, ptr);
+	SDEBUG("   src2: ");
+	src2 = atom_get_src(ctx, attr, ptr);
+	dst &= src1;
+	dst |= src2;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_move(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t src, saved;
+	int dptr = *ptr;
+	if (((attr >> 3) & 7) != ATOM_SRC_DWORD)
+		atom_get_dst(ctx, arg, attr, ptr, &saved, 0);
+	else {
+		atom_skip_dst(ctx, arg, attr, ptr);
+		saved = 0xCDCDCDCD;
+	}
+	SDEBUG("   src: ");
+	src = atom_get_src(ctx, attr, ptr);
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, src, saved);
+}
+
+static void atom_op_mul(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src;
+	SDEBUG("   src1: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, NULL, 1);
+	SDEBUG("   src2: ");
+	src = atom_get_src(ctx, attr, ptr);
+	ctx->ctx->divmul[0] = dst * src;
+}
+
+static void atom_op_nop(atom_exec_context *ctx, int *ptr, int arg)
+{
+	/* nothing */
+}
+
+static void atom_op_or(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src, saved;
+	int dptr = *ptr;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	SDEBUG("   src: ");
+	src = atom_get_src(ctx, attr, ptr);
+	dst |= src;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_postcard(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t val = U8((*ptr)++);
+	SDEBUG("POST card output: 0x%02X\n", val);
+}
+
+static void atom_op_repeat(atom_exec_context *ctx, int *ptr, int arg)
+{
+	printk(KERN_INFO "unimplemented!\n");
+}
+
+static void atom_op_restorereg(atom_exec_context *ctx, int *ptr, int arg)
+{
+	printk(KERN_INFO "unimplemented!\n");
+}
+
+static void atom_op_savereg(atom_exec_context *ctx, int *ptr, int arg)
+{
+	printk(KERN_INFO "unimplemented!\n");
+}
+
+static void atom_op_setdatablock(atom_exec_context *ctx, int *ptr, int arg)
+{
+	int idx = U8(*ptr);
+	(*ptr)++;
+	SDEBUG("   block: %d\n", idx);
+	if (!idx)
+		ctx->ctx->data_block = 0;
+	else if (idx == 255)
+		ctx->ctx->data_block = ctx->start;
+	else
+		ctx->ctx->data_block = U16(ctx->ctx->data_table + 4 + 2 * idx);
+	SDEBUG("   base: 0x%04X\n", ctx->ctx->data_block);
+}
+
+static void atom_op_setfbbase(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	SDEBUG("   fb_base: ");
+	ctx->ctx->fb_base = atom_get_src(ctx, attr, ptr);
+}
+
+static void atom_op_setport(atom_exec_context *ctx, int *ptr, int arg)
+{
+	int port;
+	switch (arg) {
+	case ATOM_PORT_ATI:
+		port = U16(*ptr);
+		if (port < ATOM_IO_NAMES_CNT)
+			SDEBUG("   port: %d (%s)\n", port, atom_io_names[port]);
+		else
+			SDEBUG("   port: %d\n", port);
+		if (!port)
+			ctx->ctx->io_mode = ATOM_IO_MM;
+		else
+			ctx->ctx->io_mode = ATOM_IO_IIO | port;
+		(*ptr) += 2;
+		break;
+	case ATOM_PORT_PCI:
+		ctx->ctx->io_mode = ATOM_IO_PCI;
+		(*ptr)++;
+		break;
+	case ATOM_PORT_SYSIO:
+		ctx->ctx->io_mode = ATOM_IO_SYSIO;
+		(*ptr)++;
+		break;
+	}
+}
+
+static void atom_op_setregblock(atom_exec_context *ctx, int *ptr, int arg)
+{
+	ctx->ctx->reg_block = U16(*ptr);
+	(*ptr) += 2;
+	SDEBUG("   base: 0x%04X\n", ctx->ctx->reg_block);
+}
+
+static void atom_op_shl(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++), shift;
+	uint32_t saved, dst;
+	int dptr = *ptr;
+	attr &= 0x38;
+	attr |= atom_def_dst[attr >> 3] << 6;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	shift = U8((*ptr)++);
+	SDEBUG("   shift: %d\n", shift);
+	dst <<= shift;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_shr(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++), shift;
+	uint32_t saved, dst;
+	int dptr = *ptr;
+	attr &= 0x38;
+	attr |= atom_def_dst[attr >> 3] << 6;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	shift = U8((*ptr)++);
+	SDEBUG("   shift: %d\n", shift);
+	dst >>= shift;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_sub(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src, saved;
+	int dptr = *ptr;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	SDEBUG("   src: ");
+	src = atom_get_src(ctx, attr, ptr);
+	dst -= src;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_switch(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t src, val, target;
+	SDEBUG("   switch: ");
+	src = atom_get_src(ctx, attr, ptr);
+	while (U16(*ptr) != ATOM_CASE_END)
+		if (U8(*ptr) == ATOM_CASE_MAGIC) {
+			(*ptr)++;
+			SDEBUG("   case: ");
+			val =
+			    atom_get_src(ctx, (attr & 0x38) | ATOM_ARG_IMM,
+					 ptr);
+			target = U16(*ptr);
+			if (val == src) {
+				SDEBUG("   target: %04X\n", target);
+				*ptr = ctx->start + target;
+				return;
+			}
+			(*ptr) += 2;
+		} else {
+			printk(KERN_INFO "Bad case.\n");
+			return;
+		}
+	(*ptr) += 2;
+}
+
+static void atom_op_test(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src;
+	SDEBUG("   src1: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, NULL, 1);
+	SDEBUG("   src2: ");
+	src = atom_get_src(ctx, attr, ptr);
+	ctx->ctx->cs_equal = ((dst & src) == 0);
+	SDEBUG("   result: %s\n", ctx->ctx->cs_equal ? "EQ" : "NE");
+}
+
+static void atom_op_xor(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++);
+	uint32_t dst, src, saved;
+	int dptr = *ptr;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	SDEBUG("   src: ");
+	src = atom_get_src(ctx, attr, ptr);
+	dst ^= src;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_debug(atom_exec_context *ctx, int *ptr, int arg)
+{
+	printk(KERN_INFO "unimplemented!\n");
+}
+
+static struct {
+	void (*func) (atom_exec_context *, int *, int);
+	int arg;
+} opcode_table[ATOM_OP_CNT] = {
+	{
+	NULL, 0}, {
+	atom_op_move, ATOM_ARG_REG}, {
+	atom_op_move, ATOM_ARG_PS}, {
+	atom_op_move, ATOM_ARG_WS}, {
+	atom_op_move, ATOM_ARG_FB}, {
+	atom_op_move, ATOM_ARG_PLL}, {
+	atom_op_move, ATOM_ARG_MC}, {
+	atom_op_and, ATOM_ARG_REG}, {
+	atom_op_and, ATOM_ARG_PS}, {
+	atom_op_and, ATOM_ARG_WS}, {
+	atom_op_and, ATOM_ARG_FB}, {
+	atom_op_and, ATOM_ARG_PLL}, {
+	atom_op_and, ATOM_ARG_MC}, {
+	atom_op_or, ATOM_ARG_REG}, {
+	atom_op_or, ATOM_ARG_PS}, {
+	atom_op_or, ATOM_ARG_WS}, {
+	atom_op_or, ATOM_ARG_FB}, {
+	atom_op_or, ATOM_ARG_PLL}, {
+	atom_op_or, ATOM_ARG_MC}, {
+	atom_op_shl, ATOM_ARG_REG}, {
+	atom_op_shl, ATOM_ARG_PS}, {
+	atom_op_shl, ATOM_ARG_WS}, {
+	atom_op_shl, ATOM_ARG_FB}, {
+	atom_op_shl, ATOM_ARG_PLL}, {
+	atom_op_shl, ATOM_ARG_MC}, {
+	atom_op_shr, ATOM_ARG_REG}, {
+	atom_op_shr, ATOM_ARG_PS}, {
+	atom_op_shr, ATOM_ARG_WS}, {
+	atom_op_shr, ATOM_ARG_FB}, {
+	atom_op_shr, ATOM_ARG_PLL}, {
+	atom_op_shr, ATOM_ARG_MC}, {
+	atom_op_mul, ATOM_ARG_REG}, {
+	atom_op_mul, ATOM_ARG_PS}, {
+	atom_op_mul, ATOM_ARG_WS}, {
+	atom_op_mul, ATOM_ARG_FB}, {
+	atom_op_mul, ATOM_ARG_PLL}, {
+	atom_op_mul, ATOM_ARG_MC}, {
+	atom_op_div, ATOM_ARG_REG}, {
+	atom_op_div, ATOM_ARG_PS}, {
+	atom_op_div, ATOM_ARG_WS}, {
+	atom_op_div, ATOM_ARG_FB}, {
+	atom_op_div, ATOM_ARG_PLL}, {
+	atom_op_div, ATOM_ARG_MC}, {
+	atom_op_add, ATOM_ARG_REG}, {
+	atom_op_add, ATOM_ARG_PS}, {
+	atom_op_add, ATOM_ARG_WS}, {
+	atom_op_add, ATOM_ARG_FB}, {
+	atom_op_add, ATOM_ARG_PLL}, {
+	atom_op_add, ATOM_ARG_MC}, {
+	atom_op_sub, ATOM_ARG_REG}, {
+	atom_op_sub, ATOM_ARG_PS}, {
+	atom_op_sub, ATOM_ARG_WS}, {
+	atom_op_sub, ATOM_ARG_FB}, {
+	atom_op_sub, ATOM_ARG_PLL}, {
+	atom_op_sub, ATOM_ARG_MC}, {
+	atom_op_setport, ATOM_PORT_ATI}, {
+	atom_op_setport, ATOM_PORT_PCI}, {
+	atom_op_setport, ATOM_PORT_SYSIO}, {
+	atom_op_setregblock, 0}, {
+	atom_op_setfbbase, 0}, {
+	atom_op_compare, ATOM_ARG_REG}, {
+	atom_op_compare, ATOM_ARG_PS}, {
+	atom_op_compare, ATOM_ARG_WS}, {
+	atom_op_compare, ATOM_ARG_FB}, {
+	atom_op_compare, ATOM_ARG_PLL}, {
+	atom_op_compare, ATOM_ARG_MC}, {
+	atom_op_switch, 0}, {
+	atom_op_jump, ATOM_COND_ALWAYS}, {
+	atom_op_jump, ATOM_COND_EQUAL}, {
+	atom_op_jump, ATOM_COND_BELOW}, {
+	atom_op_jump, ATOM_COND_ABOVE}, {
+	atom_op_jump, ATOM_COND_BELOWOREQUAL}, {
+	atom_op_jump, ATOM_COND_ABOVEOREQUAL}, {
+	atom_op_jump, ATOM_COND_NOTEQUAL}, {
+	atom_op_test, ATOM_ARG_REG}, {
+	atom_op_test, ATOM_ARG_PS}, {
+	atom_op_test, ATOM_ARG_WS}, {
+	atom_op_test, ATOM_ARG_FB}, {
+	atom_op_test, ATOM_ARG_PLL}, {
+	atom_op_test, ATOM_ARG_MC}, {
+	atom_op_delay, ATOM_UNIT_MILLISEC}, {
+	atom_op_delay, ATOM_UNIT_MICROSEC}, {
+	atom_op_calltable, 0}, {
+	atom_op_repeat, 0}, {
+	atom_op_clear, ATOM_ARG_REG}, {
+	atom_op_clear, ATOM_ARG_PS}, {
+	atom_op_clear, ATOM_ARG_WS}, {
+	atom_op_clear, ATOM_ARG_FB}, {
+	atom_op_clear, ATOM_ARG_PLL}, {
+	atom_op_clear, ATOM_ARG_MC}, {
+	atom_op_nop, 0}, {
+	atom_op_eot, 0}, {
+	atom_op_mask, ATOM_ARG_REG}, {
+	atom_op_mask, ATOM_ARG_PS}, {
+	atom_op_mask, ATOM_ARG_WS}, {
+	atom_op_mask, ATOM_ARG_FB}, {
+	atom_op_mask, ATOM_ARG_PLL}, {
+	atom_op_mask, ATOM_ARG_MC}, {
+	atom_op_postcard, 0}, {
+	atom_op_beep, 0}, {
+	atom_op_savereg, 0}, {
+	atom_op_restorereg, 0}, {
+	atom_op_setdatablock, 0}, {
+	atom_op_xor, ATOM_ARG_REG}, {
+	atom_op_xor, ATOM_ARG_PS}, {
+	atom_op_xor, ATOM_ARG_WS}, {
+	atom_op_xor, ATOM_ARG_FB}, {
+	atom_op_xor, ATOM_ARG_PLL}, {
+	atom_op_xor, ATOM_ARG_MC}, {
+	atom_op_shl, ATOM_ARG_REG}, {
+	atom_op_shl, ATOM_ARG_PS}, {
+	atom_op_shl, ATOM_ARG_WS}, {
+	atom_op_shl, ATOM_ARG_FB}, {
+	atom_op_shl, ATOM_ARG_PLL}, {
+	atom_op_shl, ATOM_ARG_MC}, {
+	atom_op_shr, ATOM_ARG_REG}, {
+	atom_op_shr, ATOM_ARG_PS}, {
+	atom_op_shr, ATOM_ARG_WS}, {
+	atom_op_shr, ATOM_ARG_FB}, {
+	atom_op_shr, ATOM_ARG_PLL}, {
+	atom_op_shr, ATOM_ARG_MC}, {
+atom_op_debug, 0},};
+
+void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
+{
+	int base = CU16(ctx->cmd_table + 4 + 2 * index);
+	int len, ws, ps, ptr;
+	unsigned char op;
+	atom_exec_context ectx;
+
+	if (!base)
+		return;
+
+	len = CU16(base + ATOM_CT_SIZE_PTR);
+	ws = CU8(base + ATOM_CT_WS_PTR);
+	ps = CU8(base + ATOM_CT_PS_PTR) & ATOM_CT_PS_MASK;
+	ptr = base + ATOM_CT_CODE_PTR;
+
+	SDEBUG(">> execute %04X (len %d, WS %d, PS %d)\n", base, len, ws, ps);
+
+	/* reset reg block */
+	ctx->reg_block = 0;
+	ectx.ctx = ctx;
+	ectx.ps_shift = ps / 4;
+	ectx.start = base;
+	ectx.ps = params;
+	if (ws)
+		ectx.ws = kzalloc(4 * ws, GFP_KERNEL);
+	else
+		ectx.ws = NULL;
+
+	debug_depth++;
+	while (1) {
+		op = CU8(ptr++);
+		if (op < ATOM_OP_NAMES_CNT)
+			SDEBUG("%s @ 0x%04X\n", atom_op_names[op], ptr - 1);
+		else
+			SDEBUG("[%d] @ 0x%04X\n", op, ptr - 1);
+
+		if (op < ATOM_OP_CNT && op > 0)
+			opcode_table[op].func(&ectx, &ptr,
+					      opcode_table[op].arg);
+		else
+			break;
+
+		if (op == ATOM_OP_EOT)
+			break;
+	}
+	debug_depth--;
+	SDEBUG("<<\n");
+
+	if (ws)
+		kfree(ectx.ws);
+}
+
+static int atom_iio_len[] = { 1, 2, 3, 3, 3, 3, 4, 4, 4, 3 };
+
+static void atom_index_iio(struct atom_context *ctx, int base)
+{
+	ctx->iio = kzalloc(2 * 256, GFP_KERNEL);
+	while (CU8(base) == ATOM_IIO_START) {
+		ctx->iio[CU8(base + 1)] = base + 2;
+		base += 2;
+		while (CU8(base) != ATOM_IIO_END)
+			base += atom_iio_len[CU8(base)];
+		base += 3;
+	}
+}
+
+struct atom_context *atom_parse(struct card_info *card, void *bios)
+{
+	int base;
+	struct atom_context *ctx =
+	    kzalloc(sizeof(struct atom_context), GFP_KERNEL);
+	char *str;
+	char name[512];
+	int i;
+
+	ctx->card = card;
+	ctx->bios = bios;
+
+	if (CU16(0) != ATOM_BIOS_MAGIC) {
+		printk(KERN_INFO "Invalid BIOS magic.\n");
+		kfree(ctx);
+		return NULL;
+	}
+	if (strncmp
+	    (CSTR(ATOM_ATI_MAGIC_PTR), ATOM_ATI_MAGIC,
+	     strlen(ATOM_ATI_MAGIC))) {
+		printk(KERN_INFO "Invalid ATI magic.\n");
+		kfree(ctx);
+		return NULL;
+	}
+
+	base = CU16(ATOM_ROM_TABLE_PTR);
+	if (strncmp
+	    (CSTR(base + ATOM_ROM_MAGIC_PTR), ATOM_ROM_MAGIC,
+	     strlen(ATOM_ROM_MAGIC))) {
+		printk(KERN_INFO "Invalid ATOM magic.\n");
+		kfree(ctx);
+		return NULL;
+	}
+
+	ctx->cmd_table = CU16(base + ATOM_ROM_CMD_PTR);
+	ctx->data_table = CU16(base + ATOM_ROM_DATA_PTR);
+	atom_index_iio(ctx, CU16(ctx->data_table + ATOM_DATA_IIO_PTR) + 4);
+
+	str = CSTR(CU16(base + ATOM_ROM_MSG_PTR));
+	while (*str && ((*str == '\n') || (*str == '\r')))
+		str++;
+	/* name string isn't always 0 terminated */
+	for (i = 0; i < 511; i++) {
+		name[i] = str[i];
+		if (name[i] < '.' || name[i] > 'z') {
+			name[i] = 0;
+			break;
+		}
+	}
+	printk(KERN_INFO "ATOM BIOS: %s\n", name);
+
+	return ctx;
+}
+
+int atom_asic_init(struct atom_context *ctx)
+{
+	int hwi = CU16(ctx->data_table + ATOM_DATA_FWI_PTR);
+	uint32_t ps[16];
+	memset(ps, 0, 64);
+
+	ps[0] = cpu_to_le32(CU32(hwi + ATOM_FWI_DEFSCLK_PTR));
+	ps[1] = cpu_to_le32(CU32(hwi + ATOM_FWI_DEFMCLK_PTR));
+	if (!ps[0] || !ps[1])
+		return 1;
+
+	if (!CU16(ctx->cmd_table + 4 + 2 * ATOM_CMD_INIT))
+		return 1;
+	atom_execute_table(ctx, ATOM_CMD_INIT, ps);
+
+	return 0;
+}
+
+void atom_destroy(struct atom_context *ctx)
+{
+	if (ctx->iio)
+		kfree(ctx->iio);
+	kfree(ctx);
+}
+
+void atom_parse_data_header(struct atom_context *ctx, int index,
+			    uint16_t * size, uint8_t * frev, uint8_t * crev,
+			    uint16_t * data_start)
+{
+	int offset = index * 2 + 4;
+	int idx = CU16(ctx->data_table + offset);
+
+	if (size)
+		*size = CU16(idx);
+	if (frev)
+		*frev = CU8(idx + 2);
+	if (crev)
+		*crev = CU8(idx + 3);
+	*data_start = idx;
+	return;
+}
+
+void atom_parse_cmd_header(struct atom_context *ctx, int index, uint8_t * frev,
+			   uint8_t * crev)
+{
+	int offset = index * 2 + 4;
+	int idx = CU16(ctx->cmd_table + offset);
+
+	if (frev)
+		*frev = CU8(idx + 2);
+	if (crev)
+		*crev = CU8(idx + 3);
+	return;
+}
diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h
new file mode 100644
index 00000000000..e6eb38f2bca
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atom.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Stanislaw Skowronek
+ */
+
+#ifndef ATOM_H
+#define ATOM_H
+
+#include <linux/types.h>
+#include "drmP.h"
+
+#define ATOM_BIOS_MAGIC		0xAA55
+#define ATOM_ATI_MAGIC_PTR	0x30
+#define ATOM_ATI_MAGIC		" 761295520"
+#define ATOM_ROM_TABLE_PTR	0x48
+
+#define ATOM_ROM_MAGIC		"ATOM"
+#define ATOM_ROM_MAGIC_PTR	4
+
+#define ATOM_ROM_MSG_PTR	0x10
+#define ATOM_ROM_CMD_PTR	0x1E
+#define ATOM_ROM_DATA_PTR	0x20
+
+#define ATOM_CMD_INIT		0
+#define ATOM_CMD_SETSCLK	0x0A
+#define ATOM_CMD_SETMCLK	0x0B
+#define ATOM_CMD_SETPCLK	0x0C
+
+#define ATOM_DATA_FWI_PTR	0xC
+#define ATOM_DATA_IIO_PTR	0x32
+
+#define ATOM_FWI_DEFSCLK_PTR	8
+#define ATOM_FWI_DEFMCLK_PTR	0xC
+#define ATOM_FWI_MAXSCLK_PTR	0x24
+#define ATOM_FWI_MAXMCLK_PTR	0x28
+
+#define ATOM_CT_SIZE_PTR	0
+#define ATOM_CT_WS_PTR		4
+#define ATOM_CT_PS_PTR		5
+#define ATOM_CT_PS_MASK		0x7F
+#define ATOM_CT_CODE_PTR	6
+
+#define ATOM_OP_CNT		123
+#define ATOM_OP_EOT		91
+
+#define ATOM_CASE_MAGIC		0x63
+#define ATOM_CASE_END		0x5A5A
+
+#define ATOM_ARG_REG		0
+#define ATOM_ARG_PS		1
+#define ATOM_ARG_WS		2
+#define ATOM_ARG_FB		3
+#define ATOM_ARG_ID		4
+#define ATOM_ARG_IMM		5
+#define ATOM_ARG_PLL		6
+#define ATOM_ARG_MC		7
+
+#define ATOM_SRC_DWORD		0
+#define ATOM_SRC_WORD0		1
+#define ATOM_SRC_WORD8		2
+#define ATOM_SRC_WORD16		3
+#define ATOM_SRC_BYTE0		4
+#define ATOM_SRC_BYTE8		5
+#define ATOM_SRC_BYTE16		6
+#define ATOM_SRC_BYTE24		7
+
+#define ATOM_WS_QUOTIENT	0x40
+#define ATOM_WS_REMAINDER	0x41
+#define ATOM_WS_DATAPTR		0x42
+#define ATOM_WS_SHIFT		0x43
+#define ATOM_WS_OR_MASK		0x44
+#define ATOM_WS_AND_MASK	0x45
+#define ATOM_WS_FB_WINDOW	0x46
+#define ATOM_WS_ATTRIBUTES	0x47
+
+#define ATOM_IIO_NOP		0
+#define ATOM_IIO_START		1
+#define ATOM_IIO_READ		2
+#define ATOM_IIO_WRITE		3
+#define ATOM_IIO_CLEAR		4
+#define ATOM_IIO_SET		5
+#define ATOM_IIO_MOVE_INDEX	6
+#define ATOM_IIO_MOVE_ATTR	7
+#define ATOM_IIO_MOVE_DATA	8
+#define ATOM_IIO_END		9
+
+#define ATOM_IO_MM		0
+#define ATOM_IO_PCI		1
+#define ATOM_IO_SYSIO		2
+#define ATOM_IO_IIO		0x80
+
+struct card_info {
+	struct drm_device *dev;
+	void (* reg_write)(struct card_info *, uint32_t, uint32_t);   /*  filled by driver */
+        uint32_t (* reg_read)(struct card_info *, uint32_t);          /*  filled by driver */
+	void (* mc_write)(struct card_info *, uint32_t, uint32_t);   /*  filled by driver */
+        uint32_t (* mc_read)(struct card_info *, uint32_t);          /*  filled by driver */
+	void (* pll_write)(struct card_info *, uint32_t, uint32_t);   /*  filled by driver */
+        uint32_t (* pll_read)(struct card_info *, uint32_t);          /*  filled by driver */
+};
+
+struct atom_context {
+	struct card_info *card;
+	void *bios;
+	uint32_t cmd_table, data_table;
+	uint16_t *iio;
+
+	uint16_t data_block;
+	uint32_t fb_base;
+	uint32_t divmul[2];
+	uint16_t io_attr;
+	uint16_t reg_block;
+	uint8_t shift;
+	int cs_equal, cs_above;
+	int io_mode;
+};
+
+extern int atom_debug;
+
+struct atom_context *atom_parse(struct card_info *, void *);
+void atom_execute_table(struct atom_context *, int, uint32_t *);
+int atom_asic_init(struct atom_context *);
+void atom_destroy(struct atom_context *);
+void atom_parse_data_header(struct atom_context *ctx, int index, uint16_t *size, uint8_t *frev, uint8_t *crev, uint16_t *data_start);
+void atom_parse_cmd_header(struct atom_context *ctx, int index, uint8_t *frev, uint8_t *crev);
+#include "atom-types.h"
+#include "atombios.h"
+#include "ObjectID.h"
+
+#endif
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
new file mode 100644
index 00000000000..cf67928abbc
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -0,0 +1,4785 @@
+/*
+ * Copyright 2006-2007 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/****************************************************************************/
+/*Portion I: Definitions  shared between VBIOS and Driver                   */
+/****************************************************************************/
+
+#ifndef _ATOMBIOS_H
+#define _ATOMBIOS_H
+
+#define ATOM_VERSION_MAJOR                   0x00020000
+#define ATOM_VERSION_MINOR                   0x00000002
+
+#define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
+
+/* Endianness should be specified before inclusion,
+ * default to little endian
+ */
+#ifndef ATOM_BIG_ENDIAN
+#error Endian not specified
+#endif
+
+#ifdef _H2INC
+#ifndef ULONG
+typedef unsigned long ULONG;
+#endif
+
+#ifndef UCHAR
+typedef unsigned char UCHAR;
+#endif
+
+#ifndef USHORT
+typedef unsigned short USHORT;
+#endif
+#endif
+
+#define ATOM_DAC_A            0
+#define ATOM_DAC_B            1
+#define ATOM_EXT_DAC          2
+
+#define ATOM_CRTC1            0
+#define ATOM_CRTC2            1
+
+#define ATOM_DIGA             0
+#define ATOM_DIGB             1
+
+#define ATOM_PPLL1            0
+#define ATOM_PPLL2            1
+
+#define ATOM_SCALER1          0
+#define ATOM_SCALER2          1
+
+#define ATOM_SCALER_DISABLE   0
+#define ATOM_SCALER_CENTER    1
+#define ATOM_SCALER_EXPANSION 2
+#define ATOM_SCALER_MULTI_EX  3
+
+#define ATOM_DISABLE          0
+#define ATOM_ENABLE           1
+#define ATOM_LCD_BLOFF                          (ATOM_DISABLE+2)
+#define ATOM_LCD_BLON                           (ATOM_ENABLE+2)
+#define ATOM_LCD_BL_BRIGHTNESS_CONTROL          (ATOM_ENABLE+3)
+#define ATOM_LCD_SELFTEST_START									(ATOM_DISABLE+5)
+#define ATOM_LCD_SELFTEST_STOP									(ATOM_ENABLE+5)
+#define ATOM_ENCODER_INIT			                  (ATOM_DISABLE+7)
+
+#define ATOM_BLANKING         1
+#define ATOM_BLANKING_OFF     0
+
+#define ATOM_CURSOR1          0
+#define ATOM_CURSOR2          1
+
+#define ATOM_ICON1            0
+#define ATOM_ICON2            1
+
+#define ATOM_CRT1             0
+#define ATOM_CRT2             1
+
+#define ATOM_TV_NTSC          1
+#define ATOM_TV_NTSCJ         2
+#define ATOM_TV_PAL           3
+#define ATOM_TV_PALM          4
+#define ATOM_TV_PALCN         5
+#define ATOM_TV_PALN          6
+#define ATOM_TV_PAL60         7
+#define ATOM_TV_SECAM         8
+#define ATOM_TV_CV            16
+
+#define ATOM_DAC1_PS2         1
+#define ATOM_DAC1_CV          2
+#define ATOM_DAC1_NTSC        3
+#define ATOM_DAC1_PAL         4
+
+#define ATOM_DAC2_PS2         ATOM_DAC1_PS2
+#define ATOM_DAC2_CV          ATOM_DAC1_CV
+#define ATOM_DAC2_NTSC        ATOM_DAC1_NTSC
+#define ATOM_DAC2_PAL         ATOM_DAC1_PAL
+
+#define ATOM_PM_ON            0
+#define ATOM_PM_STANDBY       1
+#define ATOM_PM_SUSPEND       2
+#define ATOM_PM_OFF           3
+
+/* Bit0:{=0:single, =1:dual},
+   Bit1 {=0:666RGB, =1:888RGB},
+   Bit2:3:{Grey level}
+   Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/
+
+#define ATOM_PANEL_MISC_DUAL               0x00000001
+#define ATOM_PANEL_MISC_888RGB             0x00000002
+#define ATOM_PANEL_MISC_GREY_LEVEL         0x0000000C
+#define ATOM_PANEL_MISC_FPDI               0x00000010
+#define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT   2
+#define ATOM_PANEL_MISC_SPATIAL            0x00000020
+#define ATOM_PANEL_MISC_TEMPORAL           0x00000040
+#define ATOM_PANEL_MISC_API_ENABLED        0x00000080
+
+#define MEMTYPE_DDR1              "DDR1"
+#define MEMTYPE_DDR2              "DDR2"
+#define MEMTYPE_DDR3              "DDR3"
+#define MEMTYPE_DDR4              "DDR4"
+
+#define ASIC_BUS_TYPE_PCI         "PCI"
+#define ASIC_BUS_TYPE_AGP         "AGP"
+#define ASIC_BUS_TYPE_PCIE        "PCI_EXPRESS"
+
+/* Maximum size of that FireGL flag string */
+
+#define ATOM_FIREGL_FLAG_STRING     "FGL"	/* Flag used to enable FireGL Support */
+#define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING  3	/* sizeof( ATOM_FIREGL_FLAG_STRING ) */
+
+#define ATOM_FAKE_DESKTOP_STRING    "DSK"	/* Flag used to enable mobile ASIC on Desktop */
+#define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING  ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
+
+#define ATOM_M54T_FLAG_STRING       "M54T"	/* Flag used to enable M54T Support */
+#define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING    4	/* sizeof( ATOM_M54T_FLAG_STRING ) */
+
+#define HW_ASSISTED_I2C_STATUS_FAILURE          2
+#define HW_ASSISTED_I2C_STATUS_SUCCESS          1
+
+#pragma pack(1)			/* BIOS data must use byte aligment */
+
+/*  Define offset to location of ROM header. */
+
+#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER		0x00000048L
+#define OFFSET_TO_ATOM_ROM_IMAGE_SIZE				    0x00000002L
+
+#define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE    0x94
+#define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE   20	/* including the terminator 0x0! */
+#define	OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER		0x002f
+#define	OFFSET_TO_GET_ATOMBIOS_STRINGS_START		0x006e
+
+/* Common header for all ROM Data tables.
+  Every table pointed  _ATOM_MASTER_DATA_TABLE has this common header.
+  And the pointer actually points to this header. */
+
+typedef struct _ATOM_COMMON_TABLE_HEADER {
+	USHORT usStructureSize;
+	UCHAR ucTableFormatRevision;	/*Change it when the Parser is not backward compatible */
+	UCHAR ucTableContentRevision;	/*Change it only when the table needs to change but the firmware */
+	/*Image can't be updated, while Driver needs to carry the new table! */
+} ATOM_COMMON_TABLE_HEADER;
+
+typedef struct _ATOM_ROM_HEADER {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR uaFirmWareSignature[4];	/*Signature to distinguish between Atombios and non-atombios,
+					   atombios should init it as "ATOM", don't change the position */
+	USHORT usBiosRuntimeSegmentAddress;
+	USHORT usProtectedModeInfoOffset;
+	USHORT usConfigFilenameOffset;
+	USHORT usCRC_BlockOffset;
+	USHORT usBIOS_BootupMessageOffset;
+	USHORT usInt10Offset;
+	USHORT usPciBusDevInitCode;
+	USHORT usIoBaseAddress;
+	USHORT usSubsystemVendorID;
+	USHORT usSubsystemID;
+	USHORT usPCI_InfoOffset;
+	USHORT usMasterCommandTableOffset;	/*Offset for SW to get all command table offsets, Don't change the position */
+	USHORT usMasterDataTableOffset;	/*Offset for SW to get all data table offsets, Don't change the position */
+	UCHAR ucExtendedFunctionCode;
+	UCHAR ucReserved;
+} ATOM_ROM_HEADER;
+
+/*==============================Command Table Portion==================================== */
+
+#ifdef	UEFI_BUILD
+#define	UTEMP	USHORT
+#define	USHORT	void*
+#endif
+
+typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES {
+	USHORT ASIC_Init;	/* Function Table, used by various SW components,latest version 1.1 */
+	USHORT GetDisplaySurfaceSize;	/* Atomic Table,  Used by Bios when enabling HW ICON */
+	USHORT ASIC_RegistersInit;	/* Atomic Table,  indirectly used by various SW components,called from ASIC_Init */
+	USHORT VRAM_BlockVenderDetection;	/* Atomic Table,  used only by Bios */
+	USHORT DIGxEncoderControl;	/* Only used by Bios */
+	USHORT MemoryControllerInit;	/* Atomic Table,  indirectly used by various SW components,called from ASIC_Init */
+	USHORT EnableCRTCMemReq;	/* Function Table,directly used by various SW components,latest version 2.1 */
+	USHORT MemoryParamAdjust;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock if needed */
+	USHORT DVOEncoderControl;	/* Function Table,directly used by various SW components,latest version 1.2 */
+	USHORT GPIOPinControl;	/* Atomic Table,  only used by Bios */
+	USHORT SetEngineClock;	/*Function Table,directly used by various SW components,latest version 1.1 */
+	USHORT SetMemoryClock;	/* Function Table,directly used by various SW components,latest version 1.1 */
+	USHORT SetPixelClock;	/*Function Table,directly used by various SW components,latest version 1.2 */
+	USHORT DynamicClockGating;	/* Atomic Table,  indirectly used by various SW components,called from ASIC_Init */
+	USHORT ResetMemoryDLL;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
+	USHORT ResetMemoryDevice;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
+	USHORT MemoryPLLInit;
+	USHORT AdjustDisplayPll;	/* only used by Bios */
+	USHORT AdjustMemoryController;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
+	USHORT EnableASIC_StaticPwrMgt;	/* Atomic Table,  only used by Bios */
+	USHORT ASIC_StaticPwrMgtStatusChange;	/* Obsolete, only used by Bios */
+	USHORT DAC_LoadDetection;	/* Atomic Table,  directly used by various SW components,latest version 1.2 */
+	USHORT LVTMAEncoderControl;	/* Atomic Table,directly used by various SW components,latest version 1.3 */
+	USHORT LCD1OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT DAC1EncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT DAC2EncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT DVOOutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT CV1OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT GetConditionalGoldenSetting;	/* only used by Bios */
+	USHORT TVEncoderControl;	/* Function Table,directly used by various SW components,latest version 1.1 */
+	USHORT TMDSAEncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 1.3 */
+	USHORT LVDSEncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 1.3 */
+	USHORT TV1OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT EnableScaler;	/* Atomic Table,  used only by Bios */
+	USHORT BlankCRTC;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT EnableCRTC;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT GetPixelClock;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT EnableVGA_Render;	/* Function Table,directly used by various SW components,latest version 1.1 */
+	USHORT EnableVGA_Access;	/* Obsolete ,     only used by Bios */
+	USHORT SetCRTC_Timing;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT SetCRTC_OverScan;	/* Atomic Table,  used by various SW components,latest version 1.1 */
+	USHORT SetCRTC_Replication;	/* Atomic Table,  used only by Bios */
+	USHORT SelectCRTC_Source;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT EnableGraphSurfaces;	/* Atomic Table,  used only by Bios */
+	USHORT UpdateCRTC_DoubleBufferRegisters;
+	USHORT LUT_AutoFill;	/* Atomic Table,  only used by Bios */
+	USHORT EnableHW_IconCursor;	/* Atomic Table,  only used by Bios */
+	USHORT GetMemoryClock;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT GetEngineClock;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT SetCRTC_UsingDTDTiming;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT ExternalEncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 2.1 */
+	USHORT LVTMAOutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT VRAM_BlockDetectionByStrap;	/* Atomic Table,  used only by Bios */
+	USHORT MemoryCleanUp;	/* Atomic Table,  only used by Bios */
+	USHORT ProcessI2cChannelTransaction;	/* Function Table,only used by Bios */
+	USHORT WriteOneByteToHWAssistedI2C;	/* Function Table,indirectly used by various SW components */
+	USHORT ReadHWAssistedI2CStatus;	/* Atomic Table,  indirectly used by various SW components */
+	USHORT SpeedFanControl;	/* Function Table,indirectly used by various SW components,called from ASIC_Init */
+	USHORT PowerConnectorDetection;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT MC_Synchronization;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
+	USHORT ComputeMemoryEnginePLL;	/* Atomic Table,  indirectly used by various SW components,called from SetMemory/EngineClock */
+	USHORT MemoryRefreshConversion;	/* Atomic Table,  indirectly used by various SW components,called from SetMemory or SetEngineClock */
+	USHORT VRAM_GetCurrentInfoBlock;	/* Atomic Table,  used only by Bios */
+	USHORT DynamicMemorySettings;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
+	USHORT MemoryTraining;	/* Atomic Table,  used only by Bios */
+	USHORT EnableSpreadSpectrumOnPPLL;	/* Atomic Table,  directly used by various SW components,latest version 1.2 */
+	USHORT TMDSAOutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT SetVoltage;	/* Function Table,directly and/or indirectly used by various SW components,latest version 1.1 */
+	USHORT DAC1OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT DAC2OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
+	USHORT SetupHWAssistedI2CStatus;	/* Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" */
+	USHORT ClockSource;	/* Atomic Table,  indirectly used by various SW components,called from ASIC_Init */
+	USHORT MemoryDeviceInit;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
+	USHORT EnableYUV;	/* Atomic Table,  indirectly used by various SW components,called from EnableVGARender */
+	USHORT DIG1EncoderControl;	/* Atomic Table,directly used by various SW components,latest version 1.1 */
+	USHORT DIG2EncoderControl;	/* Atomic Table,directly used by various SW components,latest version 1.1 */
+	USHORT DIG1TransmitterControl;	/* Atomic Table,directly used by various SW components,latest version 1.1 */
+	USHORT DIG2TransmitterControl;	/* Atomic Table,directly used by various SW components,latest version 1.1 */
+	USHORT ProcessAuxChannelTransaction;	/* Function Table,only used by Bios */
+	USHORT DPEncoderService;	/* Function Table,only used by Bios */
+} ATOM_MASTER_LIST_OF_COMMAND_TABLES;
+
+/*  For backward compatible */
+#define ReadEDIDFromHWAssistedI2C                ProcessI2cChannelTransaction
+#define UNIPHYTransmitterControl						     DIG1TransmitterControl
+#define LVTMATransmitterControl							     DIG2TransmitterControl
+#define SetCRTC_DPM_State                        GetConditionalGoldenSetting
+#define SetUniphyInstance                        ASIC_StaticPwrMgtStatusChange
+
+typedef struct _ATOM_MASTER_COMMAND_TABLE {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables;
+} ATOM_MASTER_COMMAND_TABLE;
+
+/****************************************************************************/
+/*  Structures used in every command table */
+/****************************************************************************/
+typedef struct _ATOM_TABLE_ATTRIBUTE {
+#if ATOM_BIG_ENDIAN
+	USHORT UpdatedByUtility:1;	/* [15]=Table updated by utility flag */
+	USHORT PS_SizeInBytes:7;	/* [14:8]=Size of parameter space in Bytes (multiple of a dword), */
+	USHORT WS_SizeInBytes:8;	/* [7:0]=Size of workspace in Bytes (in multiple of a dword), */
+#else
+	USHORT WS_SizeInBytes:8;	/* [7:0]=Size of workspace in Bytes (in multiple of a dword), */
+	USHORT PS_SizeInBytes:7;	/* [14:8]=Size of parameter space in Bytes (multiple of a dword), */
+	USHORT UpdatedByUtility:1;	/* [15]=Table updated by utility flag */
+#endif
+} ATOM_TABLE_ATTRIBUTE;
+
+typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS {
+	ATOM_TABLE_ATTRIBUTE sbfAccess;
+	USHORT susAccess;
+} ATOM_TABLE_ATTRIBUTE_ACCESS;
+
+/****************************************************************************/
+/*  Common header for all command tables. */
+/*  Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. */
+/*  And the pointer actually points to this header. */
+/****************************************************************************/
+typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER {
+	ATOM_COMMON_TABLE_HEADER CommonHeader;
+	ATOM_TABLE_ATTRIBUTE TableAttribute;
+} ATOM_COMMON_ROM_COMMAND_TABLE_HEADER;
+
+/****************************************************************************/
+/*  Structures used by ComputeMemoryEnginePLLTable */
+/****************************************************************************/
+#define COMPUTE_MEMORY_PLL_PARAM        1
+#define COMPUTE_ENGINE_PLL_PARAM        2
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS {
+	ULONG ulClock;		/* When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div */
+	UCHAR ucAction;		/* 0:reserved //1:Memory //2:Engine */
+	UCHAR ucReserved;	/* may expand to return larger Fbdiv later */
+	UCHAR ucFbDiv;		/* return value */
+	UCHAR ucPostDiv;	/* return value */
+} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS;
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 {
+	ULONG ulClock;		/* When return, [23:0] return real clock */
+	UCHAR ucAction;		/* 0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register */
+	USHORT usFbDiv;		/* return Feedback value to be written to register */
+	UCHAR ucPostDiv;	/* return post div to be written to register */
+} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2;
+#define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
+
+#define SET_CLOCK_FREQ_MASK                     0x00FFFFFF	/* Clock change tables only take bit [23:0] as the requested clock value */
+#define USE_NON_BUS_CLOCK_MASK                  0x01000000	/* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */
+#define USE_MEMORY_SELF_REFRESH_MASK            0x02000000	/* Only applicable to memory clock change, when set, using memory self refresh during clock transition */
+#define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE   0x04000000	/* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */
+#define FIRST_TIME_CHANGE_CLOCK									0x08000000	/* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */
+#define SKIP_SW_PROGRAM_PLL											0x10000000	/* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */
+#define USE_SS_ENABLED_PIXEL_CLOCK  USE_NON_BUS_CLOCK_MASK
+
+#define b3USE_NON_BUS_CLOCK_MASK                  0x01	/* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */
+#define b3USE_MEMORY_SELF_REFRESH                 0x02	/* Only applicable to memory clock change, when set, using memory self refresh during clock transition */
+#define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE   0x04	/* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */
+#define b3FIRST_TIME_CHANGE_CLOCK									0x08	/* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */
+#define b3SKIP_SW_PROGRAM_PLL											0x10	/* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */
+
+typedef struct _ATOM_COMPUTE_CLOCK_FREQ {
+#if ATOM_BIG_ENDIAN
+	ULONG ulComputeClockFlag:8;	/*  =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */
+	ULONG ulClockFreq:24;	/*  in unit of 10kHz */
+#else
+	ULONG ulClockFreq:24;	/*  in unit of 10kHz */
+	ULONG ulComputeClockFlag:8;	/*  =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */
+#endif
+} ATOM_COMPUTE_CLOCK_FREQ;
+
+typedef struct _ATOM_S_MPLL_FB_DIVIDER {
+	USHORT usFbDivFrac;
+	USHORT usFbDiv;
+} ATOM_S_MPLL_FB_DIVIDER;
+
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 {
+	union {
+		ATOM_COMPUTE_CLOCK_FREQ ulClock;	/* Input Parameter */
+		ATOM_S_MPLL_FB_DIVIDER ulFbDiv;	/* Output Parameter */
+	};
+	UCHAR ucRefDiv;		/* Output Parameter */
+	UCHAR ucPostDiv;	/* Output Parameter */
+	UCHAR ucCntlFlag;	/* Output Parameter */
+	UCHAR ucReserved;
+} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3;
+
+/*  ucCntlFlag */
+#define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN          1
+#define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE            2
+#define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE         4
+
+typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER {
+	ATOM_COMPUTE_CLOCK_FREQ ulClock;
+	ULONG ulReserved[2];
+} DYNAMICE_MEMORY_SETTINGS_PARAMETER;
+
+typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER {
+	ATOM_COMPUTE_CLOCK_FREQ ulClock;
+	ULONG ulMemoryClock;
+	ULONG ulReserved;
+} DYNAMICE_ENGINE_SETTINGS_PARAMETER;
+
+/****************************************************************************/
+/*  Structures used by SetEngineClockTable */
+/****************************************************************************/
+typedef struct _SET_ENGINE_CLOCK_PARAMETERS {
+	ULONG ulTargetEngineClock;	/* In 10Khz unit */
+} SET_ENGINE_CLOCK_PARAMETERS;
+
+typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION {
+	ULONG ulTargetEngineClock;	/* In 10Khz unit */
+	COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
+} SET_ENGINE_CLOCK_PS_ALLOCATION;
+
+/****************************************************************************/
+/*  Structures used by SetMemoryClockTable */
+/****************************************************************************/
+typedef struct _SET_MEMORY_CLOCK_PARAMETERS {
+	ULONG ulTargetMemoryClock;	/* In 10Khz unit */
+} SET_MEMORY_CLOCK_PARAMETERS;
+
+typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION {
+	ULONG ulTargetMemoryClock;	/* In 10Khz unit */
+	COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
+} SET_MEMORY_CLOCK_PS_ALLOCATION;
+
+/****************************************************************************/
+/*  Structures used by ASIC_Init.ctb */
+/****************************************************************************/
+typedef struct _ASIC_INIT_PARAMETERS {
+	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
+	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
+} ASIC_INIT_PARAMETERS;
+
+typedef struct _ASIC_INIT_PS_ALLOCATION {
+	ASIC_INIT_PARAMETERS sASICInitClocks;
+	SET_ENGINE_CLOCK_PS_ALLOCATION sReserved;	/* Caller doesn't need to init this structure */
+} ASIC_INIT_PS_ALLOCATION;
+
+/****************************************************************************/
+/*  Structure used by DynamicClockGatingTable.ctb */
+/****************************************************************************/
+typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS {
+	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
+	UCHAR ucPadding[3];
+} DYNAMIC_CLOCK_GATING_PARAMETERS;
+#define  DYNAMIC_CLOCK_GATING_PS_ALLOCATION  DYNAMIC_CLOCK_GATING_PARAMETERS
+
+/****************************************************************************/
+/*  Structure used by EnableASIC_StaticPwrMgtTable.ctb */
+/****************************************************************************/
+typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS {
+	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
+	UCHAR ucPadding[3];
+} ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS;
+#define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION  ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by DAC_LoadDetectionTable.ctb */
+/****************************************************************************/
+typedef struct _DAC_LOAD_DETECTION_PARAMETERS {
+	USHORT usDeviceID;	/* {ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT} */
+	UCHAR ucDacType;	/* {ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC} */
+	UCHAR ucMisc;		/* Valid only when table revision =1.3 and above */
+} DAC_LOAD_DETECTION_PARAMETERS;
+
+/*  DAC_LOAD_DETECTION_PARAMETERS.ucMisc */
+#define DAC_LOAD_MISC_YPrPb						0x01
+
+typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION {
+	DAC_LOAD_DETECTION_PARAMETERS sDacload;
+	ULONG Reserved[2];	/*  Don't set this one, allocation for EXT DAC */
+} DAC_LOAD_DETECTION_PS_ALLOCATION;
+
+/****************************************************************************/
+/*  Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb */
+/****************************************************************************/
+typedef struct _DAC_ENCODER_CONTROL_PARAMETERS {
+	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
+	UCHAR ucDacStandard;	/*  See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0) */
+	UCHAR ucAction;		/*  0: turn off encoder */
+	/*  1: setup and turn on encoder */
+	/*  7: ATOM_ENCODER_INIT Initialize DAC */
+} DAC_ENCODER_CONTROL_PARAMETERS;
+
+#define DAC_ENCODER_CONTROL_PS_ALLOCATION  DAC_ENCODER_CONTROL_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by DIG1EncoderControlTable */
+/*                     DIG2EncoderControlTable */
+/*                     ExternalEncoderControlTable */
+/****************************************************************************/
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS {
+	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
+	UCHAR ucConfig;
+	/*  [2] Link Select: */
+	/*  =0: PHY linkA if bfLane<3 */
+	/*  =1: PHY linkB if bfLanes<3 */
+	/*  =0: PHY linkA+B if bfLanes=3 */
+	/*  [3] Transmitter Sel */
+	/*  =0: UNIPHY or PCIEPHY */
+	/*  =1: LVTMA */
+	UCHAR ucAction;		/*  =0: turn off encoder */
+	/*  =1: turn on encoder */
+	UCHAR ucEncoderMode;
+	/*  =0: DP   encoder */
+	/*  =1: LVDS encoder */
+	/*  =2: DVI  encoder */
+	/*  =3: HDMI encoder */
+	/*  =4: SDVO encoder */
+	UCHAR ucLaneNum;	/*  how many lanes to enable */
+	UCHAR ucReserved[2];
+} DIG_ENCODER_CONTROL_PARAMETERS;
+#define DIG_ENCODER_CONTROL_PS_ALLOCATION			  DIG_ENCODER_CONTROL_PARAMETERS
+#define EXTERNAL_ENCODER_CONTROL_PARAMETER			DIG_ENCODER_CONTROL_PARAMETERS
+
+/* ucConfig */
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK				0x01
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ		0x00
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ		0x01
+#define ATOM_ENCODER_CONFIG_LINK_SEL_MASK				  0x04
+#define ATOM_ENCODER_CONFIG_LINKA								  0x00
+#define ATOM_ENCODER_CONFIG_LINKB								  0x04
+#define ATOM_ENCODER_CONFIG_LINKA_B							  ATOM_TRANSMITTER_CONFIG_LINKA
+#define ATOM_ENCODER_CONFIG_LINKB_A							  ATOM_ENCODER_CONFIG_LINKB
+#define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK	0x08
+#define ATOM_ENCODER_CONFIG_UNIPHY							  0x00
+#define ATOM_ENCODER_CONFIG_LVTMA								  0x08
+#define ATOM_ENCODER_CONFIG_TRANSMITTER1				  0x00
+#define ATOM_ENCODER_CONFIG_TRANSMITTER2				  0x08
+#define ATOM_ENCODER_CONFIG_DIGB								  0x80	/*  VBIOS Internal use, outside SW should set this bit=0 */
+/*  ucAction */
+/*  ATOM_ENABLE:  Enable Encoder */
+/*  ATOM_DISABLE: Disable Encoder */
+
+/* ucEncoderMode */
+#define ATOM_ENCODER_MODE_DP											0
+#define ATOM_ENCODER_MODE_LVDS										1
+#define ATOM_ENCODER_MODE_DVI											2
+#define ATOM_ENCODER_MODE_HDMI										3
+#define ATOM_ENCODER_MODE_SDVO										4
+#define ATOM_ENCODER_MODE_TV											13
+#define ATOM_ENCODER_MODE_CV											14
+#define ATOM_ENCODER_MODE_CRT											15
+
+typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 {
+#if ATOM_BIG_ENDIAN
+	UCHAR ucReserved1:2;
+	UCHAR ucTransmitterSel:2;	/*  =0: UniphyAB, =1: UniphyCD  =2: UniphyEF */
+	UCHAR ucLinkSel:1;	/*  =0: linkA/C/E =1: linkB/D/F */
+	UCHAR ucReserved:1;
+	UCHAR ucDPLinkRate:1;	/*  =0: 1.62Ghz, =1: 2.7Ghz */
+#else
+	UCHAR ucDPLinkRate:1;	/*  =0: 1.62Ghz, =1: 2.7Ghz */
+	UCHAR ucReserved:1;
+	UCHAR ucLinkSel:1;	/*  =0: linkA/C/E =1: linkB/D/F */
+	UCHAR ucTransmitterSel:2;	/*  =0: UniphyAB, =1: UniphyCD  =2: UniphyEF */
+	UCHAR ucReserved1:2;
+#endif
+} ATOM_DIG_ENCODER_CONFIG_V2;
+
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 {
+	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
+	ATOM_DIG_ENCODER_CONFIG_V2 acConfig;
+	UCHAR ucAction;
+	UCHAR ucEncoderMode;
+	/*  =0: DP   encoder */
+	/*  =1: LVDS encoder */
+	/*  =2: DVI  encoder */
+	/*  =3: HDMI encoder */
+	/*  =4: SDVO encoder */
+	UCHAR ucLaneNum;	/*  how many lanes to enable */
+	UCHAR ucReserved[2];
+} DIG_ENCODER_CONTROL_PARAMETERS_V2;
+
+/* ucConfig */
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK				0x01
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ		  0x00
+#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ		  0x01
+#define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK				  0x04
+#define ATOM_ENCODER_CONFIG_V2_LINKA								  0x00
+#define ATOM_ENCODER_CONFIG_V2_LINKB								  0x04
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK	  0x18
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1				    0x00
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2				    0x08
+#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3				    0x10
+
+/****************************************************************************/
+/*  Structures used by UNIPHYTransmitterControlTable */
+/*                     LVTMATransmitterControlTable */
+/*                     DVOOutputControlTable */
+/****************************************************************************/
+typedef struct _ATOM_DP_VS_MODE {
+	UCHAR ucLaneSel;
+	UCHAR ucLaneSet;
+} ATOM_DP_VS_MODE;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS {
+	union {
+		USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
+		USHORT usInitInfo;	/*  when init uniphy,lower 8bit is used for connector type defined in objectid.h */
+		ATOM_DP_VS_MODE asMode;	/*  DP Voltage swing mode */
+	};
+	UCHAR ucConfig;
+	/*  [0]=0: 4 lane Link, */
+	/*     =1: 8 lane Link ( Dual Links TMDS ) */
+	/*  [1]=0: InCoherent mode */
+	/*     =1: Coherent Mode */
+	/*  [2] Link Select: */
+	/*  =0: PHY linkA   if bfLane<3 */
+	/*  =1: PHY linkB   if bfLanes<3 */
+	/*  =0: PHY linkA+B if bfLanes=3 */
+	/*  [5:4]PCIE lane Sel */
+	/*  =0: lane 0~3 or 0~7 */
+	/*  =1: lane 4~7 */
+	/*  =2: lane 8~11 or 8~15 */
+	/*  =3: lane 12~15 */
+	UCHAR ucAction;		/*  =0: turn off encoder */
+	/*  =1: turn on encoder */
+	UCHAR ucReserved[4];
+} DIG_TRANSMITTER_CONTROL_PARAMETERS;
+
+#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION		DIG_TRANSMITTER_CONTROL_PARAMETERS
+
+/* ucInitInfo */
+#define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK	0x00ff
+
+/* ucConfig */
+#define ATOM_TRANSMITTER_CONFIG_8LANE_LINK			0x01
+#define ATOM_TRANSMITTER_CONFIG_COHERENT				0x02
+#define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK		0x04
+#define ATOM_TRANSMITTER_CONFIG_LINKA						0x00
+#define ATOM_TRANSMITTER_CONFIG_LINKB						0x04
+#define ATOM_TRANSMITTER_CONFIG_LINKA_B					0x00
+#define ATOM_TRANSMITTER_CONFIG_LINKB_A					0x04
+
+#define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK	0x08	/*  only used when ATOM_TRANSMITTER_ACTION_ENABLE */
+#define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER		0x00	/*  only used when ATOM_TRANSMITTER_ACTION_ENABLE */
+#define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER		0x08	/*  only used when ATOM_TRANSMITTER_ACTION_ENABLE */
+
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK			0x30
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL			0x00
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE			0x20
+#define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN		0x30
+#define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK		0xc0
+#define ATOM_TRANSMITTER_CONFIG_LANE_0_3				0x00
+#define ATOM_TRANSMITTER_CONFIG_LANE_0_7				0x00
+#define ATOM_TRANSMITTER_CONFIG_LANE_4_7				0x40
+#define ATOM_TRANSMITTER_CONFIG_LANE_8_11				0x80
+#define ATOM_TRANSMITTER_CONFIG_LANE_8_15				0x80
+#define ATOM_TRANSMITTER_CONFIG_LANE_12_15			0xc0
+
+/* ucAction */
+#define ATOM_TRANSMITTER_ACTION_DISABLE					       0
+#define ATOM_TRANSMITTER_ACTION_ENABLE					       1
+#define ATOM_TRANSMITTER_ACTION_LCD_BLOFF				       2
+#define ATOM_TRANSMITTER_ACTION_LCD_BLON				       3
+#define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL  4
+#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START		 5
+#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP			 6
+#define ATOM_TRANSMITTER_ACTION_INIT						       7
+#define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT	       8
+#define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT		       9
+#define ATOM_TRANSMITTER_ACTION_SETUP						       10
+#define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH           11
+
+/*  Following are used for DigTransmitterControlTable ver1.2 */
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2 {
+#if ATOM_BIG_ENDIAN
+	UCHAR ucTransmitterSel:2;	/* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */
+	/*         =1 Dig Transmitter 2 ( Uniphy CD ) */
+	/*         =2 Dig Transmitter 3 ( Uniphy EF ) */
+	UCHAR ucReserved:1;
+	UCHAR fDPConnector:1;	/* bit4=0: DP connector  =1: None DP connector */
+	UCHAR ucEncoderSel:1;	/* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */
+	UCHAR ucLinkSel:1;	/* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */
+	/*     =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */
+
+	UCHAR fCoherentMode:1;	/* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */
+	UCHAR fDualLinkConnector:1;	/* bit0=1: Dual Link DVI connector */
+#else
+	UCHAR fDualLinkConnector:1;	/* bit0=1: Dual Link DVI connector */
+	UCHAR fCoherentMode:1;	/* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */
+	UCHAR ucLinkSel:1;	/* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */
+	/*     =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */
+	UCHAR ucEncoderSel:1;	/* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */
+	UCHAR fDPConnector:1;	/* bit4=0: DP connector  =1: None DP connector */
+	UCHAR ucReserved:1;
+	UCHAR ucTransmitterSel:2;	/* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */
+	/*         =1 Dig Transmitter 2 ( Uniphy CD ) */
+	/*         =2 Dig Transmitter 3 ( Uniphy EF ) */
+#endif
+} ATOM_DIG_TRANSMITTER_CONFIG_V2;
+
+/* ucConfig */
+/* Bit0 */
+#define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR			0x01
+
+/* Bit1 */
+#define ATOM_TRANSMITTER_CONFIG_V2_COHERENT				          0x02
+
+/* Bit2 */
+#define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK		        0x04
+#define ATOM_TRANSMITTER_CONFIG_V2_LINKA			            0x00
+#define ATOM_TRANSMITTER_CONFIG_V2_LINKB				            0x04
+
+/*  Bit3 */
+#define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK	        0x08
+#define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER		          0x00	/*  only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */
+#define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER		          0x08	/*  only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */
+
+/*  Bit4 */
+#define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR			        0x10
+
+/*  Bit7:6 */
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK     0xC0
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1			0x00	/* AB */
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2			0x40	/* CD */
+#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3			0x80	/* EF */
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 {
+	union {
+		USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
+		USHORT usInitInfo;	/*  when init uniphy,lower 8bit is used for connector type defined in objectid.h */
+		ATOM_DP_VS_MODE asMode;	/*  DP Voltage swing mode */
+	};
+	ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig;
+	UCHAR ucAction;		/*  define as ATOM_TRANSMITER_ACTION_XXX */
+	UCHAR ucReserved[4];
+} DIG_TRANSMITTER_CONTROL_PARAMETERS_V2;
+
+/****************************************************************************/
+/*  Structures used by DAC1OuputControlTable */
+/*                     DAC2OuputControlTable */
+/*                     LVTMAOutputControlTable  (Before DEC30) */
+/*                     TMDSAOutputControlTable  (Before DEC30) */
+/****************************************************************************/
+typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS {
+	UCHAR ucAction;		/*  Possible input:ATOM_ENABLE||ATOMDISABLE */
+	/*  When the display is LCD, in addition to above: */
+	/*  ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START|| */
+	/*  ATOM_LCD_SELFTEST_STOP */
+
+	UCHAR aucPadding[3];	/*  padding to DWORD aligned */
+} DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS;
+
+#define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+
+#define CRT1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CRT1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define CRT2_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CRT2_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define CV1_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define CV1_OUTPUT_CONTROL_PS_ALLOCATION   DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define TV1_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define TV1_OUTPUT_CONTROL_PS_ALLOCATION   DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DFP1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DFP1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DFP2_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DFP2_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define LCD1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define LCD1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define DVO_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
+#define DVO_OUTPUT_CONTROL_PS_ALLOCATION   DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
+#define DVO_OUTPUT_CONTROL_PARAMETERS_V3	 DIG_TRANSMITTER_CONTROL_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by BlankCRTCTable */
+/****************************************************************************/
+typedef struct _BLANK_CRTC_PARAMETERS {
+	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
+	UCHAR ucBlanking;	/*  ATOM_BLANKING or ATOM_BLANKINGOFF */
+	USHORT usBlackColorRCr;
+	USHORT usBlackColorGY;
+	USHORT usBlackColorBCb;
+} BLANK_CRTC_PARAMETERS;
+#define BLANK_CRTC_PS_ALLOCATION    BLANK_CRTC_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by EnableCRTCTable */
+/*                     EnableCRTCMemReqTable */
+/*                     UpdateCRTC_DoubleBufferRegistersTable */
+/****************************************************************************/
+typedef struct _ENABLE_CRTC_PARAMETERS {
+	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
+	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
+	UCHAR ucPadding[2];
+} ENABLE_CRTC_PARAMETERS;
+#define ENABLE_CRTC_PS_ALLOCATION   ENABLE_CRTC_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by SetCRTC_OverScanTable */
+/****************************************************************************/
+typedef struct _SET_CRTC_OVERSCAN_PARAMETERS {
+	USHORT usOverscanRight;	/*  right */
+	USHORT usOverscanLeft;	/*  left */
+	USHORT usOverscanBottom;	/*  bottom */
+	USHORT usOverscanTop;	/*  top */
+	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
+	UCHAR ucPadding[3];
+} SET_CRTC_OVERSCAN_PARAMETERS;
+#define SET_CRTC_OVERSCAN_PS_ALLOCATION  SET_CRTC_OVERSCAN_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by SetCRTC_ReplicationTable */
+/****************************************************************************/
+typedef struct _SET_CRTC_REPLICATION_PARAMETERS {
+	UCHAR ucH_Replication;	/*  horizontal replication */
+	UCHAR ucV_Replication;	/*  vertical replication */
+	UCHAR usCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
+	UCHAR ucPadding;
+} SET_CRTC_REPLICATION_PARAMETERS;
+#define SET_CRTC_REPLICATION_PS_ALLOCATION  SET_CRTC_REPLICATION_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by SelectCRTC_SourceTable */
+/****************************************************************************/
+typedef struct _SELECT_CRTC_SOURCE_PARAMETERS {
+	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
+	UCHAR ucDevice;		/*  ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|.... */
+	UCHAR ucPadding[2];
+} SELECT_CRTC_SOURCE_PARAMETERS;
+#define SELECT_CRTC_SOURCE_PS_ALLOCATION  SELECT_CRTC_SOURCE_PARAMETERS
+
+typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2 {
+	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
+	UCHAR ucEncoderID;	/*  DAC1/DAC2/TVOUT/DIG1/DIG2/DVO */
+	UCHAR ucEncodeMode;	/*  Encoding mode, only valid when using DIG1/DIG2/DVO */
+	UCHAR ucPadding;
+} SELECT_CRTC_SOURCE_PARAMETERS_V2;
+
+/* ucEncoderID */
+/* #define ASIC_INT_DAC1_ENCODER_ID                                              0x00 */
+/* #define ASIC_INT_TV_ENCODER_ID                                                                        0x02 */
+/* #define ASIC_INT_DIG1_ENCODER_ID                                                              0x03 */
+/* #define ASIC_INT_DAC2_ENCODER_ID                                                              0x04 */
+/* #define ASIC_EXT_TV_ENCODER_ID                                                                        0x06 */
+/* #define ASIC_INT_DVO_ENCODER_ID                                                                       0x07 */
+/* #define ASIC_INT_DIG2_ENCODER_ID                                                              0x09 */
+/* #define ASIC_EXT_DIG_ENCODER_ID                                                                       0x05 */
+
+/* ucEncodeMode */
+/* #define ATOM_ENCODER_MODE_DP                                                                          0 */
+/* #define ATOM_ENCODER_MODE_LVDS                                                                        1 */
+/* #define ATOM_ENCODER_MODE_DVI                                                                         2 */
+/* #define ATOM_ENCODER_MODE_HDMI                                                                        3 */
+/* #define ATOM_ENCODER_MODE_SDVO                                                                        4 */
+/* #define ATOM_ENCODER_MODE_TV                                                                          13 */
+/* #define ATOM_ENCODER_MODE_CV                                                                          14 */
+/* #define ATOM_ENCODER_MODE_CRT                                                                         15 */
+
+/****************************************************************************/
+/*  Structures used by SetPixelClockTable */
+/*                     GetPixelClockTable */
+/****************************************************************************/
+/* Major revision=1., Minor revision=1 */
+typedef struct _PIXEL_CLOCK_PARAMETERS {
+	USHORT usPixelClock;	/*  in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
+	/*  0 means disable PPLL */
+	USHORT usRefDiv;	/*  Reference divider */
+	USHORT usFbDiv;		/*  feedback divider */
+	UCHAR ucPostDiv;	/*  post divider */
+	UCHAR ucFracFbDiv;	/*  fractional feedback divider */
+	UCHAR ucPpll;		/*  ATOM_PPLL1 or ATOM_PPL2 */
+	UCHAR ucRefDivSrc;	/*  ATOM_PJITTER or ATO_NONPJITTER */
+	UCHAR ucCRTC;		/*  Which CRTC uses this Ppll */
+	UCHAR ucPadding;
+} PIXEL_CLOCK_PARAMETERS;
+
+/* Major revision=1., Minor revision=2, add ucMiscIfno */
+/* ucMiscInfo: */
+#define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
+#define MISC_DEVICE_INDEX_MASK        0xF0
+#define MISC_DEVICE_INDEX_SHIFT       4
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V2 {
+	USHORT usPixelClock;	/*  in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
+	/*  0 means disable PPLL */
+	USHORT usRefDiv;	/*  Reference divider */
+	USHORT usFbDiv;		/*  feedback divider */
+	UCHAR ucPostDiv;	/*  post divider */
+	UCHAR ucFracFbDiv;	/*  fractional feedback divider */
+	UCHAR ucPpll;		/*  ATOM_PPLL1 or ATOM_PPL2 */
+	UCHAR ucRefDivSrc;	/*  ATOM_PJITTER or ATO_NONPJITTER */
+	UCHAR ucCRTC;		/*  Which CRTC uses this Ppll */
+	UCHAR ucMiscInfo;	/*  Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog */
+} PIXEL_CLOCK_PARAMETERS_V2;
+
+/* Major revision=1., Minor revision=3, structure/definition change */
+/* ucEncoderMode: */
+/* ATOM_ENCODER_MODE_DP */
+/* ATOM_ENOCDER_MODE_LVDS */
+/* ATOM_ENOCDER_MODE_DVI */
+/* ATOM_ENOCDER_MODE_HDMI */
+/* ATOM_ENOCDER_MODE_SDVO */
+/* ATOM_ENCODER_MODE_TV                                                                          13 */
+/* ATOM_ENCODER_MODE_CV                                                                          14 */
+/* ATOM_ENCODER_MODE_CRT                                                                         15 */
+
+/* ucDVOConfig */
+/* #define DVO_ENCODER_CONFIG_RATE_SEL                                                   0x01 */
+/* #define DVO_ENCODER_CONFIG_DDR_SPEED                                          0x00 */
+/* #define DVO_ENCODER_CONFIG_SDR_SPEED                                          0x01 */
+/* #define DVO_ENCODER_CONFIG_OUTPUT_SEL                                         0x0c */
+/* #define DVO_ENCODER_CONFIG_LOW12BIT                                                   0x00 */
+/* #define DVO_ENCODER_CONFIG_UPPER12BIT                                         0x04 */
+/* #define DVO_ENCODER_CONFIG_24BIT                                                              0x08 */
+
+/* ucMiscInfo: also changed, see below */
+#define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL						0x01
+#define PIXEL_CLOCK_MISC_VGA_MODE										0x02
+#define PIXEL_CLOCK_MISC_CRTC_SEL_MASK							0x04
+#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1							0x00
+#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2							0x04
+#define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK			0x08
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V3 {
+	USHORT usPixelClock;	/*  in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
+	/*  0 means disable PPLL. For VGA PPLL,make sure this value is not 0. */
+	USHORT usRefDiv;	/*  Reference divider */
+	USHORT usFbDiv;		/*  feedback divider */
+	UCHAR ucPostDiv;	/*  post divider */
+	UCHAR ucFracFbDiv;	/*  fractional feedback divider */
+	UCHAR ucPpll;		/*  ATOM_PPLL1 or ATOM_PPL2 */
+	UCHAR ucTransmitterId;	/*  graphic encoder id defined in objectId.h */
+	union {
+		UCHAR ucEncoderMode;	/*  encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/ */
+		UCHAR ucDVOConfig;	/*  when use DVO, need to know SDR/DDR, 12bit or 24bit */
+	};
+	UCHAR ucMiscInfo;	/*  bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel */
+	/*  bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source */
+} PIXEL_CLOCK_PARAMETERS_V3;
+
+#define PIXEL_CLOCK_PARAMETERS_LAST			PIXEL_CLOCK_PARAMETERS_V2
+#define GET_PIXEL_CLOCK_PS_ALLOCATION		PIXEL_CLOCK_PARAMETERS_LAST
+
+/****************************************************************************/
+/*  Structures used by AdjustDisplayPllTable */
+/****************************************************************************/
+typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS {
+	USHORT usPixelClock;
+	UCHAR ucTransmitterID;
+	UCHAR ucEncodeMode;
+	union {
+		UCHAR ucDVOConfig;	/* if DVO, need passing link rate and output 12bitlow or 24bit */
+		UCHAR ucConfig;	/* if none DVO, not defined yet */
+	};
+	UCHAR ucReserved[3];
+} ADJUST_DISPLAY_PLL_PARAMETERS;
+
+#define ADJUST_DISPLAY_CONFIG_SS_ENABLE       0x10
+
+#define ADJUST_DISPLAY_PLL_PS_ALLOCATION			ADJUST_DISPLAY_PLL_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by EnableYUVTable */
+/****************************************************************************/
+typedef struct _ENABLE_YUV_PARAMETERS {
+	UCHAR ucEnable;		/*  ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB) */
+	UCHAR ucCRTC;		/*  Which CRTC needs this YUV or RGB format */
+	UCHAR ucPadding[2];
+} ENABLE_YUV_PARAMETERS;
+#define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by GetMemoryClockTable */
+/****************************************************************************/
+typedef struct _GET_MEMORY_CLOCK_PARAMETERS {
+	ULONG ulReturnMemoryClock;	/*  current memory speed in 10KHz unit */
+} GET_MEMORY_CLOCK_PARAMETERS;
+#define GET_MEMORY_CLOCK_PS_ALLOCATION  GET_MEMORY_CLOCK_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by GetEngineClockTable */
+/****************************************************************************/
+typedef struct _GET_ENGINE_CLOCK_PARAMETERS {
+	ULONG ulReturnEngineClock;	/*  current engine speed in 10KHz unit */
+} GET_ENGINE_CLOCK_PARAMETERS;
+#define GET_ENGINE_CLOCK_PS_ALLOCATION  GET_ENGINE_CLOCK_PARAMETERS
+
+/****************************************************************************/
+/*  Following Structures and constant may be obsolete */
+/****************************************************************************/
+/* Maxium 8 bytes,the data read in will be placed in the parameter space. */
+/* Read operaion successeful when the paramter space is non-zero, otherwise read operation failed */
+typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS {
+	USHORT usPrescale;	/* Ratio between Engine clock and I2C clock */
+	USHORT usVRAMAddress;	/* Adress in Frame Buffer where to pace raw EDID */
+	USHORT usStatus;	/* When use output: lower byte EDID checksum, high byte hardware status */
+	/* WHen use input:  lower byte as 'byte to read':currently limited to 128byte or 1byte */
+	UCHAR ucSlaveAddr;	/* Read from which slave */
+	UCHAR ucLineNumber;	/* Read from which HW assisted line */
+} READ_EDID_FROM_HW_I2C_DATA_PARAMETERS;
+#define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION  READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
+
+#define  ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE                  0
+#define  ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES              1
+#define  ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK       2
+#define  ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK  3
+#define  ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK       4
+
+typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS {
+	USHORT usPrescale;	/* Ratio between Engine clock and I2C clock */
+	USHORT usByteOffset;	/* Write to which byte */
+	/* Upper portion of usByteOffset is Format of data */
+	/* 1bytePS+offsetPS */
+	/* 2bytesPS+offsetPS */
+	/* blockID+offsetPS */
+	/* blockID+offsetID */
+	/* blockID+counterID+offsetID */
+	UCHAR ucData;		/* PS data1 */
+	UCHAR ucStatus;		/* Status byte 1=success, 2=failure, Also is used as PS data2 */
+	UCHAR ucSlaveAddr;	/* Write to which slave */
+	UCHAR ucLineNumber;	/* Write from which HW assisted line */
+} WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS;
+
+#define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION  WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS {
+	USHORT usPrescale;	/* Ratio between Engine clock and I2C clock */
+	UCHAR ucSlaveAddr;	/* Write to which slave */
+	UCHAR ucLineNumber;	/* Write from which HW assisted line */
+} SET_UP_HW_I2C_DATA_PARAMETERS;
+
+/**************************************************************************/
+#define SPEED_FAN_CONTROL_PS_ALLOCATION   WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+/****************************************************************************/
+/*  Structures used by PowerConnectorDetectionTable */
+/****************************************************************************/
+typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS {
+	UCHAR ucPowerConnectorStatus;	/* Used for return value 0: detected, 1:not detected */
+	UCHAR ucPwrBehaviorId;
+	USHORT usPwrBudget;	/* how much power currently boot to in unit of watt */
+} POWER_CONNECTOR_DETECTION_PARAMETERS;
+
+typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION {
+	UCHAR ucPowerConnectorStatus;	/* Used for return value 0: detected, 1:not detected */
+	UCHAR ucReserved;
+	USHORT usPwrBudget;	/* how much power currently boot to in unit of watt */
+	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+} POWER_CONNECTOR_DETECTION_PS_ALLOCATION;
+
+/****************************LVDS SS Command Table Definitions**********************/
+
+/****************************************************************************/
+/*  Structures used by EnableSpreadSpectrumOnPPLLTable */
+/****************************************************************************/
+typedef struct _ENABLE_LVDS_SS_PARAMETERS {
+	USHORT usSpreadSpectrumPercentage;
+	UCHAR ucSpreadSpectrumType;	/* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
+	UCHAR ucSpreadSpectrumStepSize_Delay;	/* bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY */
+	UCHAR ucEnable;		/* ATOM_ENABLE or ATOM_DISABLE */
+	UCHAR ucPadding[3];
+} ENABLE_LVDS_SS_PARAMETERS;
+
+/* ucTableFormatRevision=1,ucTableContentRevision=2 */
+typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2 {
+	USHORT usSpreadSpectrumPercentage;
+	UCHAR ucSpreadSpectrumType;	/* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
+	UCHAR ucSpreadSpectrumStep;	/*  */
+	UCHAR ucEnable;		/* ATOM_ENABLE or ATOM_DISABLE */
+	UCHAR ucSpreadSpectrumDelay;
+	UCHAR ucSpreadSpectrumRange;
+	UCHAR ucPadding;
+} ENABLE_LVDS_SS_PARAMETERS_V2;
+
+/* This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS. */
+typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL {
+	USHORT usSpreadSpectrumPercentage;
+	UCHAR ucSpreadSpectrumType;	/*  Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
+	UCHAR ucSpreadSpectrumStep;	/*  */
+	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
+	UCHAR ucSpreadSpectrumDelay;
+	UCHAR ucSpreadSpectrumRange;
+	UCHAR ucPpll;		/*  ATOM_PPLL1/ATOM_PPLL2 */
+} ENABLE_SPREAD_SPECTRUM_ON_PPLL;
+
+#define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION  ENABLE_SPREAD_SPECTRUM_ON_PPLL
+
+/**************************************************************************/
+
+typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION {
+	PIXEL_CLOCK_PARAMETERS sPCLKInput;
+	ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;	/* Caller doesn't need to init this portion */
+} SET_PIXEL_CLOCK_PS_ALLOCATION;
+
+#define ENABLE_VGA_RENDER_PS_ALLOCATION   SET_PIXEL_CLOCK_PS_ALLOCATION
+
+/****************************************************************************/
+/*  Structures used by ### */
+/****************************************************************************/
+typedef struct _MEMORY_TRAINING_PARAMETERS {
+	ULONG ulTargetMemoryClock;	/* In 10Khz unit */
+} MEMORY_TRAINING_PARAMETERS;
+#define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
+
+/****************************LVDS and other encoder command table definitions **********************/
+
+/****************************************************************************/
+/*  Structures used by LVDSEncoderControlTable   (Before DCE30) */
+/*                     LVTMAEncoderControlTable  (Before DCE30) */
+/*                     TMDSAEncoderControlTable  (Before DCE30) */
+/****************************************************************************/
+typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS {
+	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
+	UCHAR ucMisc;		/*  bit0=0: Enable single link */
+	/*      =1: Enable dual link */
+	/*  Bit1=0: 666RGB */
+	/*      =1: 888RGB */
+	UCHAR ucAction;		/*  0: turn off encoder */
+	/*  1: setup and turn on encoder */
+} LVDS_ENCODER_CONTROL_PARAMETERS;
+
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION  LVDS_ENCODER_CONTROL_PARAMETERS
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS    LVDS_ENCODER_CONTROL_PARAMETERS
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS    TMDS1_ENCODER_CONTROL_PARAMETERS
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
+
+/* ucTableFormatRevision=1,ucTableContentRevision=2 */
+typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 {
+	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
+	UCHAR ucMisc;		/*  see PANEL_ENCODER_MISC_xx defintions below */
+	UCHAR ucAction;		/*  0: turn off encoder */
+	/*  1: setup and turn on encoder */
+	UCHAR ucTruncate;	/*  bit0=0: Disable truncate */
+	/*      =1: Enable truncate */
+	/*  bit4=0: 666RGB */
+	/*      =1: 888RGB */
+	UCHAR ucSpatial;	/*  bit0=0: Disable spatial dithering */
+	/*      =1: Enable spatial dithering */
+	/*  bit4=0: 666RGB */
+	/*      =1: 888RGB */
+	UCHAR ucTemporal;	/*  bit0=0: Disable temporal dithering */
+	/*      =1: Enable temporal dithering */
+	/*  bit4=0: 666RGB */
+	/*      =1: 888RGB */
+	/*  bit5=0: Gray level 2 */
+	/*      =1: Gray level 4 */
+	UCHAR ucFRC;		/*  bit4=0: 25FRC_SEL pattern E */
+	/*      =1: 25FRC_SEL pattern F */
+	/*  bit6:5=0: 50FRC_SEL pattern A */
+	/*        =1: 50FRC_SEL pattern B */
+	/*        =2: 50FRC_SEL pattern C */
+	/*        =3: 50FRC_SEL pattern D */
+	/*  bit7=0: 75FRC_SEL pattern E */
+	/*      =1: 75FRC_SEL pattern F */
+} LVDS_ENCODER_CONTROL_PARAMETERS_V2;
+
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2  LVDS_ENCODER_CONTROL_PARAMETERS_V2
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_V2    LVDS_ENCODER_CONTROL_PARAMETERS_V2
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_V2    TMDS1_ENCODER_CONTROL_PARAMETERS_V2
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
+
+#define LVDS_ENCODER_CONTROL_PARAMETERS_V3     LVDS_ENCODER_CONTROL_PARAMETERS_V2
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3  LVDS_ENCODER_CONTROL_PARAMETERS_V3
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3    LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3    LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
+
+/****************************************************************************/
+/*  Structures used by ### */
+/****************************************************************************/
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS {
+	UCHAR ucEnable;		/*  Enable or Disable External TMDS encoder */
+	UCHAR ucMisc;		/*  Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} */
+	UCHAR ucPadding[2];
+} ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS;
+
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION {
+	ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder;
+	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;	/* Caller doesn't need to init this portion */
+} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION;
+
+#define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2  LVDS_ENCODER_CONTROL_PARAMETERS_V2
+
+typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 {
+	ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder;
+	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;	/* Caller doesn't need to init this portion */
+} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2;
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION {
+	DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder;
+	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+} EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION;
+
+/****************************************************************************/
+/*  Structures used by DVOEncoderControlTable */
+/****************************************************************************/
+/* ucTableFormatRevision=1,ucTableContentRevision=3 */
+
+/* ucDVOConfig: */
+#define DVO_ENCODER_CONFIG_RATE_SEL							0x01
+#define DVO_ENCODER_CONFIG_DDR_SPEED						0x00
+#define DVO_ENCODER_CONFIG_SDR_SPEED						0x01
+#define DVO_ENCODER_CONFIG_OUTPUT_SEL						0x0c
+#define DVO_ENCODER_CONFIG_LOW12BIT							0x00
+#define DVO_ENCODER_CONFIG_UPPER12BIT						0x04
+#define DVO_ENCODER_CONFIG_24BIT								0x08
+
+typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 {
+	USHORT usPixelClock;
+	UCHAR ucDVOConfig;
+	UCHAR ucAction;		/* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */
+	UCHAR ucReseved[4];
+} DVO_ENCODER_CONTROL_PARAMETERS_V3;
+#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3	DVO_ENCODER_CONTROL_PARAMETERS_V3
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for */
+/*  bit1=0: non-coherent mode */
+/*      =1: coherent mode */
+
+/* ========================================================================================== */
+/* Only change is here next time when changing encoder parameter definitions again! */
+#define LVDS_ENCODER_CONTROL_PARAMETERS_LAST     LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST  LVDS_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST    LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST    LVDS_ENCODER_CONTROL_PARAMETERS_V3
+#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
+
+#define DVO_ENCODER_CONTROL_PARAMETERS_LAST      DVO_ENCODER_CONTROL_PARAMETERS
+#define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST   DVO_ENCODER_CONTROL_PS_ALLOCATION
+
+/* ========================================================================================== */
+#define PANEL_ENCODER_MISC_DUAL                0x01
+#define PANEL_ENCODER_MISC_COHERENT            0x02
+#define	PANEL_ENCODER_MISC_TMDS_LINKB					 0x04
+#define	PANEL_ENCODER_MISC_HDMI_TYPE					 0x08
+
+#define PANEL_ENCODER_ACTION_DISABLE           ATOM_DISABLE
+#define PANEL_ENCODER_ACTION_ENABLE            ATOM_ENABLE
+#define PANEL_ENCODER_ACTION_COHERENTSEQ       (ATOM_ENABLE+1)
+
+#define PANEL_ENCODER_TRUNCATE_EN              0x01
+#define PANEL_ENCODER_TRUNCATE_DEPTH           0x10
+#define PANEL_ENCODER_SPATIAL_DITHER_EN        0x01
+#define PANEL_ENCODER_SPATIAL_DITHER_DEPTH     0x10
+#define PANEL_ENCODER_TEMPORAL_DITHER_EN       0x01
+#define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH    0x10
+#define PANEL_ENCODER_TEMPORAL_LEVEL_4         0x20
+#define PANEL_ENCODER_25FRC_MASK               0x10
+#define PANEL_ENCODER_25FRC_E                  0x00
+#define PANEL_ENCODER_25FRC_F                  0x10
+#define PANEL_ENCODER_50FRC_MASK               0x60
+#define PANEL_ENCODER_50FRC_A                  0x00
+#define PANEL_ENCODER_50FRC_B                  0x20
+#define PANEL_ENCODER_50FRC_C                  0x40
+#define PANEL_ENCODER_50FRC_D                  0x60
+#define PANEL_ENCODER_75FRC_MASK               0x80
+#define PANEL_ENCODER_75FRC_E                  0x00
+#define PANEL_ENCODER_75FRC_F                  0x80
+
+/****************************************************************************/
+/*  Structures used by SetVoltageTable */
+/****************************************************************************/
+#define SET_VOLTAGE_TYPE_ASIC_VDDC             1
+#define SET_VOLTAGE_TYPE_ASIC_MVDDC            2
+#define SET_VOLTAGE_TYPE_ASIC_MVDDQ            3
+#define SET_VOLTAGE_TYPE_ASIC_VDDCI            4
+#define SET_VOLTAGE_INIT_MODE                  5
+#define SET_VOLTAGE_GET_MAX_VOLTAGE            6	/* Gets the Max. voltage for the soldered Asic */
+
+#define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE       0x1
+#define SET_ASIC_VOLTAGE_MODE_SOURCE_A         0x2
+#define SET_ASIC_VOLTAGE_MODE_SOURCE_B         0x4
+
+#define	SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE      0x0
+#define	SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL      0x1
+#define	SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK     0x2
+
+typedef struct _SET_VOLTAGE_PARAMETERS {
+	UCHAR ucVoltageType;	/*  To tell which voltage to set up, VDDC/MVDDC/MVDDQ */
+	UCHAR ucVoltageMode;	/*  To set all, to set source A or source B or ... */
+	UCHAR ucVoltageIndex;	/*  An index to tell which voltage level */
+	UCHAR ucReserved;
+} SET_VOLTAGE_PARAMETERS;
+
+typedef struct _SET_VOLTAGE_PARAMETERS_V2 {
+	UCHAR ucVoltageType;	/*  To tell which voltage to set up, VDDC/MVDDC/MVDDQ */
+	UCHAR ucVoltageMode;	/*  Not used, maybe use for state machine for differen power mode */
+	USHORT usVoltageLevel;	/*  real voltage level */
+} SET_VOLTAGE_PARAMETERS_V2;
+
+typedef struct _SET_VOLTAGE_PS_ALLOCATION {
+	SET_VOLTAGE_PARAMETERS sASICSetVoltage;
+	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
+} SET_VOLTAGE_PS_ALLOCATION;
+
+/****************************************************************************/
+/*  Structures used by TVEncoderControlTable */
+/****************************************************************************/
+typedef struct _TV_ENCODER_CONTROL_PARAMETERS {
+	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
+	UCHAR ucTvStandard;	/*  See definition "ATOM_TV_NTSC ..." */
+	UCHAR ucAction;		/*  0: turn off encoder */
+	/*  1: setup and turn on encoder */
+} TV_ENCODER_CONTROL_PARAMETERS;
+
+typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION {
+	TV_ENCODER_CONTROL_PARAMETERS sTVEncoder;
+	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;	/*  Don't set this one */
+} TV_ENCODER_CONTROL_PS_ALLOCATION;
+
+/* ==============================Data Table Portion==================================== */
+
+#ifdef	UEFI_BUILD
+#define	UTEMP	USHORT
+#define	USHORT	void*
+#endif
+
+/****************************************************************************/
+/*  Structure used in Data.mtb */
+/****************************************************************************/
+typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES {
+	USHORT UtilityPipeLine;	/*  Offest for the utility to get parser info,Don't change this position! */
+	USHORT MultimediaCapabilityInfo;	/*  Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios */
+	USHORT MultimediaConfigInfo;	/*  Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios */
+	USHORT StandardVESA_Timing;	/*  Only used by Bios */
+	USHORT FirmwareInfo;	/*  Shared by various SW components,latest version 1.4 */
+	USHORT DAC_Info;	/*  Will be obsolete from R600 */
+	USHORT LVDS_Info;	/*  Shared by various SW components,latest version 1.1 */
+	USHORT TMDS_Info;	/*  Will be obsolete from R600 */
+	USHORT AnalogTV_Info;	/*  Shared by various SW components,latest version 1.1 */
+	USHORT SupportedDevicesInfo;	/*  Will be obsolete from R600 */
+	USHORT GPIO_I2C_Info;	/*  Shared by various SW components,latest version 1.2 will be used from R600 */
+	USHORT VRAM_UsageByFirmware;	/*  Shared by various SW components,latest version 1.3 will be used from R600 */
+	USHORT GPIO_Pin_LUT;	/*  Shared by various SW components,latest version 1.1 */
+	USHORT VESA_ToInternalModeLUT;	/*  Only used by Bios */
+	USHORT ComponentVideoInfo;	/*  Shared by various SW components,latest version 2.1 will be used from R600 */
+	USHORT PowerPlayInfo;	/*  Shared by various SW components,latest version 2.1,new design from R600 */
+	USHORT CompassionateData;	/*  Will be obsolete from R600 */
+	USHORT SaveRestoreInfo;	/*  Only used by Bios */
+	USHORT PPLL_SS_Info;	/*  Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info */
+	USHORT OemInfo;		/*  Defined and used by external SW, should be obsolete soon */
+	USHORT XTMDS_Info;	/*  Will be obsolete from R600 */
+	USHORT MclkSS_Info;	/*  Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used */
+	USHORT Object_Header;	/*  Shared by various SW components,latest version 1.1 */
+	USHORT IndirectIOAccess;	/*  Only used by Bios,this table position can't change at all!! */
+	USHORT MC_InitParameter;	/*  Only used by command table */
+	USHORT ASIC_VDDC_Info;	/*  Will be obsolete from R600 */
+	USHORT ASIC_InternalSS_Info;	/*  New tabel name from R600, used to be called "ASIC_MVDDC_Info" */
+	USHORT TV_VideoMode;	/*  Only used by command table */
+	USHORT VRAM_Info;	/*  Only used by command table, latest version 1.3 */
+	USHORT MemoryTrainingInfo;	/*  Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1 */
+	USHORT IntegratedSystemInfo;	/*  Shared by various SW components */
+	USHORT ASIC_ProfilingInfo;	/*  New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600 */
+	USHORT VoltageObjectInfo;	/*  Shared by various SW components, latest version 1.1 */
+	USHORT PowerSourceInfo;	/*  Shared by various SW components, latest versoin 1.1 */
+} ATOM_MASTER_LIST_OF_DATA_TABLES;
+
+#ifdef	UEFI_BUILD
+#define	USHORT	UTEMP
+#endif
+
+typedef struct _ATOM_MASTER_DATA_TABLE {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables;
+} ATOM_MASTER_DATA_TABLE;
+
+/****************************************************************************/
+/*  Structure used in MultimediaCapabilityInfoTable */
+/****************************************************************************/
+typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ULONG ulSignature;	/*  HW info table signature string "$ATI" */
+	UCHAR ucI2C_Type;	/*  I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc) */
+	UCHAR ucTV_OutInfo;	/*  Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7) */
+	UCHAR ucVideoPortInfo;	/*  Provides the video port capabilities */
+	UCHAR ucHostPortInfo;	/*  Provides host port configuration information */
+} ATOM_MULTIMEDIA_CAPABILITY_INFO;
+
+/****************************************************************************/
+/*  Structure used in MultimediaConfigInfoTable */
+/****************************************************************************/
+typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ULONG ulSignature;	/*  MM info table signature sting "$MMT" */
+	UCHAR ucTunerInfo;	/*  Type of tuner installed on the adapter (4:0) and video input for tuner (7:5) */
+	UCHAR ucAudioChipInfo;	/*  List the audio chip type (3:0) product type (4) and OEM revision (7:5) */
+	UCHAR ucProductID;	/*  Defines as OEM ID or ATI board ID dependent on product type setting */
+	UCHAR ucMiscInfo1;	/*  Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7) */
+	UCHAR ucMiscInfo2;	/*  I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6) */
+	UCHAR ucMiscInfo3;	/*  Video Decoder Type (3:0) Video In Standard/Crystal (7:4) */
+	UCHAR ucMiscInfo4;	/*  Video Decoder Host Config (2:0) reserved (7:3) */
+	UCHAR ucVideoInput0Info;	/*  Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+	UCHAR ucVideoInput1Info;	/*  Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+	UCHAR ucVideoInput2Info;	/*  Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+	UCHAR ucVideoInput3Info;	/*  Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+	UCHAR ucVideoInput4Info;	/*  Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
+} ATOM_MULTIMEDIA_CONFIG_INFO;
+
+/****************************************************************************/
+/*  Structures used in FirmwareInfoTable */
+/****************************************************************************/
+
+/*  usBIOSCapability Defintion: */
+/*  Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; */
+/*  Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; */
+/*  Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; */
+/*  Others: Reserved */
+#define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED         0x0001
+#define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT            0x0002
+#define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT     0x0004
+#define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT      0x0008
+#define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT      0x0010
+#define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU         0x0020
+#define ATOM_BIOS_INFO_WMI_SUPPORT                  0x0040
+#define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM   0x0080
+#define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT          0x0100
+#define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK        0x1E00
+#define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
+#define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE  0x4000
+
+#ifndef _H2INC
+
+/* Please don't add or expand this bitfield structure below, this one will retire soon.! */
+typedef struct _ATOM_FIRMWARE_CAPABILITY {
+#if ATOM_BIG_ENDIAN
+	USHORT Reserved:3;
+	USHORT HyperMemory_Size:4;
+	USHORT HyperMemory_Support:1;
+	USHORT PPMode_Assigned:1;
+	USHORT WMI_SUPPORT:1;
+	USHORT GPUControlsBL:1;
+	USHORT EngineClockSS_Support:1;
+	USHORT MemoryClockSS_Support:1;
+	USHORT ExtendedDesktopSupport:1;
+	USHORT DualCRTC_Support:1;
+	USHORT FirmwarePosted:1;
+#else
+	USHORT FirmwarePosted:1;
+	USHORT DualCRTC_Support:1;
+	USHORT ExtendedDesktopSupport:1;
+	USHORT MemoryClockSS_Support:1;
+	USHORT EngineClockSS_Support:1;
+	USHORT GPUControlsBL:1;
+	USHORT WMI_SUPPORT:1;
+	USHORT PPMode_Assigned:1;
+	USHORT HyperMemory_Support:1;
+	USHORT HyperMemory_Size:4;
+	USHORT Reserved:3;
+#endif
+} ATOM_FIRMWARE_CAPABILITY;
+
+typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS {
+	ATOM_FIRMWARE_CAPABILITY sbfAccess;
+	USHORT susAccess;
+} ATOM_FIRMWARE_CAPABILITY_ACCESS;
+
+#else
+
+typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS {
+	USHORT susAccess;
+} ATOM_FIRMWARE_CAPABILITY_ACCESS;
+
+#endif
+
+typedef struct _ATOM_FIRMWARE_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ULONG ulFirmwareRevision;
+	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
+	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
+	ULONG ulDriverTargetEngineClock;	/* In 10Khz unit */
+	ULONG ulDriverTargetMemoryClock;	/* In 10Khz unit */
+	ULONG ulMaxEngineClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulMaxMemoryClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulMaxPixelClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulASICMaxEngineClock;	/* In 10Khz unit */
+	ULONG ulASICMaxMemoryClock;	/* In 10Khz unit */
+	UCHAR ucASICMaxTemperature;
+	UCHAR ucPadding[3];	/* Don't use them */
+	ULONG aulReservedForBIOS[3];	/* Don't use them */
+	USHORT usMinEngineClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxEngineClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinEngineClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMinMemoryClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxMemoryClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinMemoryClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMaxPixelClock;	/* In 10Khz unit, Max.  Pclk */
+	USHORT usMinPixelClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxPixelClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinPixelClockPLL_Output;	/* In 10Khz unit, the definitions above can't change!!! */
+	ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+	USHORT usReferenceClock;	/* In 10Khz unit */
+	USHORT usPM_RTS_Location;	/* RTS PM4 starting location in ROM in 1Kb unit */
+	UCHAR ucPM_RTS_StreamSize;	/* RTS PM4 packets in Kb unit */
+	UCHAR ucDesign_ID;	/* Indicate what is the board design */
+	UCHAR ucMemoryModule_ID;	/* Indicate what is the board design */
+} ATOM_FIRMWARE_INFO;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_2 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ULONG ulFirmwareRevision;
+	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
+	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
+	ULONG ulDriverTargetEngineClock;	/* In 10Khz unit */
+	ULONG ulDriverTargetMemoryClock;	/* In 10Khz unit */
+	ULONG ulMaxEngineClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulMaxMemoryClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulMaxPixelClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulASICMaxEngineClock;	/* In 10Khz unit */
+	ULONG ulASICMaxMemoryClock;	/* In 10Khz unit */
+	UCHAR ucASICMaxTemperature;
+	UCHAR ucMinAllowedBL_Level;
+	UCHAR ucPadding[2];	/* Don't use them */
+	ULONG aulReservedForBIOS[2];	/* Don't use them */
+	ULONG ulMinPixelClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMinEngineClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxEngineClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinEngineClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMinMemoryClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxMemoryClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinMemoryClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMaxPixelClock;	/* In 10Khz unit, Max.  Pclk */
+	USHORT usMinPixelClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxPixelClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinPixelClockPLL_Output;	/* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
+	ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+	USHORT usReferenceClock;	/* In 10Khz unit */
+	USHORT usPM_RTS_Location;	/* RTS PM4 starting location in ROM in 1Kb unit */
+	UCHAR ucPM_RTS_StreamSize;	/* RTS PM4 packets in Kb unit */
+	UCHAR ucDesign_ID;	/* Indicate what is the board design */
+	UCHAR ucMemoryModule_ID;	/* Indicate what is the board design */
+} ATOM_FIRMWARE_INFO_V1_2;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_3 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ULONG ulFirmwareRevision;
+	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
+	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
+	ULONG ulDriverTargetEngineClock;	/* In 10Khz unit */
+	ULONG ulDriverTargetMemoryClock;	/* In 10Khz unit */
+	ULONG ulMaxEngineClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulMaxMemoryClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulMaxPixelClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulASICMaxEngineClock;	/* In 10Khz unit */
+	ULONG ulASICMaxMemoryClock;	/* In 10Khz unit */
+	UCHAR ucASICMaxTemperature;
+	UCHAR ucMinAllowedBL_Level;
+	UCHAR ucPadding[2];	/* Don't use them */
+	ULONG aulReservedForBIOS;	/* Don't use them */
+	ULONG ul3DAccelerationEngineClock;	/* In 10Khz unit */
+	ULONG ulMinPixelClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMinEngineClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxEngineClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinEngineClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMinMemoryClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxMemoryClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinMemoryClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMaxPixelClock;	/* In 10Khz unit, Max.  Pclk */
+	USHORT usMinPixelClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxPixelClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinPixelClockPLL_Output;	/* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
+	ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+	USHORT usReferenceClock;	/* In 10Khz unit */
+	USHORT usPM_RTS_Location;	/* RTS PM4 starting location in ROM in 1Kb unit */
+	UCHAR ucPM_RTS_StreamSize;	/* RTS PM4 packets in Kb unit */
+	UCHAR ucDesign_ID;	/* Indicate what is the board design */
+	UCHAR ucMemoryModule_ID;	/* Indicate what is the board design */
+} ATOM_FIRMWARE_INFO_V1_3;
+
+typedef struct _ATOM_FIRMWARE_INFO_V1_4 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ULONG ulFirmwareRevision;
+	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
+	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
+	ULONG ulDriverTargetEngineClock;	/* In 10Khz unit */
+	ULONG ulDriverTargetMemoryClock;	/* In 10Khz unit */
+	ULONG ulMaxEngineClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulMaxMemoryClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulMaxPixelClockPLL_Output;	/* In 10Khz unit */
+	ULONG ulASICMaxEngineClock;	/* In 10Khz unit */
+	ULONG ulASICMaxMemoryClock;	/* In 10Khz unit */
+	UCHAR ucASICMaxTemperature;
+	UCHAR ucMinAllowedBL_Level;
+	USHORT usBootUpVDDCVoltage;	/* In MV unit */
+	USHORT usLcdMinPixelClockPLL_Output;	/*  In MHz unit */
+	USHORT usLcdMaxPixelClockPLL_Output;	/*  In MHz unit */
+	ULONG ul3DAccelerationEngineClock;	/* In 10Khz unit */
+	ULONG ulMinPixelClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMinEngineClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxEngineClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinEngineClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMinMemoryClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxMemoryClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinMemoryClockPLL_Output;	/* In 10Khz unit */
+	USHORT usMaxPixelClock;	/* In 10Khz unit, Max.  Pclk */
+	USHORT usMinPixelClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMaxPixelClockPLL_Input;	/* In 10Khz unit */
+	USHORT usMinPixelClockPLL_Output;	/* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
+	ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+	USHORT usReferenceClock;	/* In 10Khz unit */
+	USHORT usPM_RTS_Location;	/* RTS PM4 starting location in ROM in 1Kb unit */
+	UCHAR ucPM_RTS_StreamSize;	/* RTS PM4 packets in Kb unit */
+	UCHAR ucDesign_ID;	/* Indicate what is the board design */
+	UCHAR ucMemoryModule_ID;	/* Indicate what is the board design */
+} ATOM_FIRMWARE_INFO_V1_4;
+
+#define ATOM_FIRMWARE_INFO_LAST  ATOM_FIRMWARE_INFO_V1_4
+
+/****************************************************************************/
+/*  Structures used in IntegratedSystemInfoTable */
+/****************************************************************************/
+#define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN      0x2
+#define IGP_CAP_FLAG_AC_CARD               0x4
+#define IGP_CAP_FLAG_SDVO_CARD             0x8
+#define IGP_CAP_FLAG_POSTDIV_BY_2_MODE     0x10
+
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ULONG ulBootUpEngineClock;	/* in 10kHz unit */
+	ULONG ulBootUpMemoryClock;	/* in 10kHz unit */
+	ULONG ulMaxSystemMemoryClock;	/* in 10kHz unit */
+	ULONG ulMinSystemMemoryClock;	/* in 10kHz unit */
+	UCHAR ucNumberOfCyclesInPeriodHi;
+	UCHAR ucLCDTimingSel;	/* =0:not valid.!=0 sel this timing descriptor from LCD EDID. */
+	USHORT usReserved1;
+	USHORT usInterNBVoltageLow;	/* An intermidiate PMW value to set the voltage */
+	USHORT usInterNBVoltageHigh;	/* Another intermidiate PMW value to set the voltage */
+	ULONG ulReserved[2];
+
+	USHORT usFSBClock;	/* In MHz unit */
+	USHORT usCapabilityFlag;	/* Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable */
+	/* Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card */
+	/* Bit[4]==1: P/2 mode, ==0: P/1 mode */
+	USHORT usPCIENBCfgReg7;	/* bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal */
+	USHORT usK8MemoryClock;	/* in MHz unit */
+	USHORT usK8SyncStartDelay;	/* in 0.01 us unit */
+	USHORT usK8DataReturnTime;	/* in 0.01 us unit */
+	UCHAR ucMaxNBVoltage;
+	UCHAR ucMinNBVoltage;
+	UCHAR ucMemoryType;	/* [7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved */
+	UCHAR ucNumberOfCyclesInPeriod;	/* CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod */
+	UCHAR ucStartingPWM_HighTime;	/* CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime */
+	UCHAR ucHTLinkWidth;	/* 16 bit vs. 8 bit */
+	UCHAR ucMaxNBVoltageHigh;
+	UCHAR ucMinNBVoltageHigh;
+} ATOM_INTEGRATED_SYSTEM_INFO;
+
+/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
+ulBootUpMemoryClock:    For Intel IGP,it's the UMA system memory clock
+                        For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
+ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
+                        For AMD IGP,for now this can be 0
+ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
+                        For AMD IGP,for now this can be 0
+
+usFSBClock:             For Intel IGP,it's FSB Freq
+                        For AMD IGP,it's HT Link Speed
+
+usK8MemoryClock:        For AMD IGP only. For RevF CPU, set it to 200
+usK8SyncStartDelay:     For AMD IGP only. Memory access latency in K8, required for watermark calculation
+usK8DataReturnTime:     For AMD IGP only. Memory access latency in K8, required for watermark calculation
+
+VC:Voltage Control
+ucMaxNBVoltage:         Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
+ucMinNBVoltage:         Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
+
+ucNumberOfCyclesInPeriod:   Indicate how many cycles when PWM duty is 100%. low 8 bits of the value.
+ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0
+
+ucMaxNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of  the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
+ucMinNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
+
+usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+*/
+
+/*
+The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST;
+Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need.
+The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries.
+
+SW components can access the IGP system infor structure in the same way as before
+*/
+
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ULONG ulBootUpEngineClock;	/* in 10kHz unit */
+	ULONG ulReserved1[2];	/* must be 0x0 for the reserved */
+	ULONG ulBootUpUMAClock;	/* in 10kHz unit */
+	ULONG ulBootUpSidePortClock;	/* in 10kHz unit */
+	ULONG ulMinSidePortClock;	/* in 10kHz unit */
+	ULONG ulReserved2[6];	/* must be 0x0 for the reserved */
+	ULONG ulSystemConfig;	/* see explanation below */
+	ULONG ulBootUpReqDisplayVector;
+	ULONG ulOtherDisplayMisc;
+	ULONG ulDDISlot1Config;
+	ULONG ulDDISlot2Config;
+	UCHAR ucMemoryType;	/* [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved */
+	UCHAR ucUMAChannelNumber;
+	UCHAR ucDockingPinBit;
+	UCHAR ucDockingPinPolarity;
+	ULONG ulDockingPinCFGInfo;
+	ULONG ulCPUCapInfo;
+	USHORT usNumberOfCyclesInPeriod;
+	USHORT usMaxNBVoltage;
+	USHORT usMinNBVoltage;
+	USHORT usBootUpNBVoltage;
+	ULONG ulHTLinkFreq;	/* in 10Khz */
+	USHORT usMinHTLinkWidth;
+	USHORT usMaxHTLinkWidth;
+	USHORT usUMASyncStartDelay;
+	USHORT usUMADataReturnTime;
+	USHORT usLinkStatusZeroTime;
+	USHORT usReserved;
+	ULONG ulHighVoltageHTLinkFreq;	/*  in 10Khz */
+	ULONG ulLowVoltageHTLinkFreq;	/*  in 10Khz */
+	USHORT usMaxUpStreamHTLinkWidth;
+	USHORT usMaxDownStreamHTLinkWidth;
+	USHORT usMinUpStreamHTLinkWidth;
+	USHORT usMinDownStreamHTLinkWidth;
+	ULONG ulReserved3[97];	/* must be 0x0 */
+} ATOM_INTEGRATED_SYSTEM_INFO_V2;
+
+/*
+ulBootUpEngineClock:   Boot-up Engine Clock in 10Khz;
+ulBootUpUMAClock:      Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
+ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock
+
+ulSystemConfig:
+Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
+Bit[1]=1: system boots up at AMD overdrived state or user customized  mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state
+      =0: system boots up at driver control state. Power state depends on PowerPlay table.
+Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used.
+Bit[3]=1: Only one power state(Performance) will be supported.
+      =0: Multiple power states supported from PowerPlay table.
+Bit[4]=1: CLMC is supported and enabled on current system.
+      =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface.
+Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement.
+      =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
+Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored.
+      =0: Voltage settings is determined by powerplay table.
+Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
+      =0: Enable CLMC as regular mode, CDLD and CILR will be enabled.
+
+ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions.
+
+ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
+			              [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSuppportedStd definition;
+
+ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design).
+      [3:0]  - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
+			[7:4]  - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
+			[15:8] - Lane configuration attribute;
+      [23:16]- Connector type, possible value:
+               CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
+               CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
+               CONNECTOR_OBJECT_ID_HDMI_TYPE_A
+               CONNECTOR_OBJECT_ID_DISPLAYPORT
+			[31:24]- Reserved
+
+ulDDISlot2Config: Same as Slot1.
+ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC.
+For IGP, Hypermemory is the only memory type showed in CCC.
+
+ucUMAChannelNumber:  how many channels for the UMA;
+
+ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin
+ucDockingPinBit:     which bit in this register to read the pin status;
+ucDockingPinPolarity:Polarity of the pin when docked;
+
+ulCPUCapInfo:        [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0
+
+usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
+usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode.
+usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode.
+                    GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0
+                    PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1
+                    GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
+usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.
+
+ulHTLinkFreq:       Bootup HT link Frequency in 10Khz.
+usMinHTLinkWidth:   Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth.
+                    If CDLW enabled, both upstream and downstream width should be the same during bootup.
+usMaxHTLinkWidth:   Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth.
+                    If CDLW enabled, both upstream and downstream width should be the same during bootup.
+
+usUMASyncStartDelay: Memory access latency, required for watermark calculation
+usUMADataReturnTime: Memory access latency, required for watermark calculation
+usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us
+for Griffin or Greyhound. SBIOS needs to convert to actual time by:
+                     if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us)
+                     if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us)
+                     if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us)
+                     if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us)
+
+ulHighVoltageHTLinkFreq:     HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0.
+                             This must be less than or equal to ulHTLinkFreq(bootup frequency).
+ulLowVoltageHTLinkFreq:      HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0.
+                             This must be less than or equal to ulHighVoltageHTLinkFreq.
+
+usMaxUpStreamHTLinkWidth:    Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now.
+usMaxDownStreamHTLinkWidth:  same as above.
+usMinUpStreamHTLinkWidth:    Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now.
+usMinDownStreamHTLinkWidth:  same as above.
+*/
+
+#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE                 0x00000001
+#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE             0x00000002
+#define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE                  0x00000004
+#define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY         0x00000008
+#define SYSTEM_CONFIG_CLMC_ENABLED                        0x00000010
+#define SYSTEM_CONFIG_CDLW_ENABLED                        0x00000020
+#define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED              0x00000040
+#define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED            0x00000080
+
+#define IGP_DDI_SLOT_LANE_CONFIG_MASK                     0x000000FF
+
+#define b0IGP_DDI_SLOT_LANE_MAP_MASK                      0x0F
+#define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK              0xF0
+#define b0IGP_DDI_SLOT_CONFIG_LANE_0_3                    0x01
+#define b0IGP_DDI_SLOT_CONFIG_LANE_4_7                    0x02
+#define b0IGP_DDI_SLOT_CONFIG_LANE_8_11                   0x04
+#define b0IGP_DDI_SLOT_CONFIG_LANE_12_15                  0x08
+
+#define IGP_DDI_SLOT_ATTRIBUTE_MASK                       0x0000FF00
+#define IGP_DDI_SLOT_CONFIG_REVERSED                      0x00000100
+#define b1IGP_DDI_SLOT_CONFIG_REVERSED                    0x01
+
+#define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK                  0x00FF0000
+
+#define ATOM_CRT_INT_ENCODER1_INDEX                       0x00000000
+#define ATOM_LCD_INT_ENCODER1_INDEX                       0x00000001
+#define ATOM_TV_INT_ENCODER1_INDEX                        0x00000002
+#define ATOM_DFP_INT_ENCODER1_INDEX                       0x00000003
+#define ATOM_CRT_INT_ENCODER2_INDEX                       0x00000004
+#define ATOM_LCD_EXT_ENCODER1_INDEX                       0x00000005
+#define ATOM_TV_EXT_ENCODER1_INDEX                        0x00000006
+#define ATOM_DFP_EXT_ENCODER1_INDEX                       0x00000007
+#define ATOM_CV_INT_ENCODER1_INDEX                        0x00000008
+#define ATOM_DFP_INT_ENCODER2_INDEX                       0x00000009
+#define ATOM_CRT_EXT_ENCODER1_INDEX                       0x0000000A
+#define ATOM_CV_EXT_ENCODER1_INDEX                        0x0000000B
+#define ATOM_DFP_INT_ENCODER3_INDEX                       0x0000000C
+#define ATOM_DFP_INT_ENCODER4_INDEX                       0x0000000D
+
+/*  define ASIC internal encoder id ( bit vector ) */
+#define ASIC_INT_DAC1_ENCODER_ID											0x00
+#define ASIC_INT_TV_ENCODER_ID														0x02
+#define ASIC_INT_DIG1_ENCODER_ID													0x03
+#define ASIC_INT_DAC2_ENCODER_ID													0x04
+#define ASIC_EXT_TV_ENCODER_ID														0x06
+#define ASIC_INT_DVO_ENCODER_ID														0x07
+#define ASIC_INT_DIG2_ENCODER_ID													0x09
+#define ASIC_EXT_DIG_ENCODER_ID														0x05
+
+/* define Encoder attribute */
+#define ATOM_ANALOG_ENCODER																0
+#define ATOM_DIGITAL_ENCODER															1
+
+#define ATOM_DEVICE_CRT1_INDEX                            0x00000000
+#define ATOM_DEVICE_LCD1_INDEX                            0x00000001
+#define ATOM_DEVICE_TV1_INDEX                             0x00000002
+#define ATOM_DEVICE_DFP1_INDEX                            0x00000003
+#define ATOM_DEVICE_CRT2_INDEX                            0x00000004
+#define ATOM_DEVICE_LCD2_INDEX                            0x00000005
+#define ATOM_DEVICE_TV2_INDEX                             0x00000006
+#define ATOM_DEVICE_DFP2_INDEX                            0x00000007
+#define ATOM_DEVICE_CV_INDEX                              0x00000008
+#define ATOM_DEVICE_DFP3_INDEX														0x00000009
+#define ATOM_DEVICE_DFP4_INDEX														0x0000000A
+#define ATOM_DEVICE_DFP5_INDEX														0x0000000B
+#define ATOM_DEVICE_RESERVEDC_INDEX                       0x0000000C
+#define ATOM_DEVICE_RESERVEDD_INDEX                       0x0000000D
+#define ATOM_DEVICE_RESERVEDE_INDEX                       0x0000000E
+#define ATOM_DEVICE_RESERVEDF_INDEX                       0x0000000F
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO                    (ATOM_DEVICE_DFP3_INDEX+1)
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO_2                  ATOM_MAX_SUPPORTED_DEVICE_INFO
+#define ATOM_MAX_SUPPORTED_DEVICE_INFO_3                  (ATOM_DEVICE_DFP5_INDEX + 1)
+
+#define ATOM_MAX_SUPPORTED_DEVICE                         (ATOM_DEVICE_RESERVEDF_INDEX+1)
+
+#define ATOM_DEVICE_CRT1_SUPPORT                          (0x1L << ATOM_DEVICE_CRT1_INDEX)
+#define ATOM_DEVICE_LCD1_SUPPORT                          (0x1L << ATOM_DEVICE_LCD1_INDEX)
+#define ATOM_DEVICE_TV1_SUPPORT                           (0x1L << ATOM_DEVICE_TV1_INDEX)
+#define ATOM_DEVICE_DFP1_SUPPORT                          (0x1L << ATOM_DEVICE_DFP1_INDEX)
+#define ATOM_DEVICE_CRT2_SUPPORT                          (0x1L << ATOM_DEVICE_CRT2_INDEX)
+#define ATOM_DEVICE_LCD2_SUPPORT                          (0x1L << ATOM_DEVICE_LCD2_INDEX)
+#define ATOM_DEVICE_TV2_SUPPORT                           (0x1L << ATOM_DEVICE_TV2_INDEX)
+#define ATOM_DEVICE_DFP2_SUPPORT                          (0x1L << ATOM_DEVICE_DFP2_INDEX)
+#define ATOM_DEVICE_CV_SUPPORT                            (0x1L << ATOM_DEVICE_CV_INDEX)
+#define ATOM_DEVICE_DFP3_SUPPORT													(0x1L << ATOM_DEVICE_DFP3_INDEX)
+#define ATOM_DEVICE_DFP4_SUPPORT													(0x1L << ATOM_DEVICE_DFP4_INDEX )
+#define ATOM_DEVICE_DFP5_SUPPORT													(0x1L << ATOM_DEVICE_DFP5_INDEX)
+
+#define ATOM_DEVICE_CRT_SUPPORT \
+	(ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT)
+#define ATOM_DEVICE_DFP_SUPPORT \
+	(ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | \
+	 ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | \
+	 ATOM_DEVICE_DFP5_SUPPORT)
+#define ATOM_DEVICE_TV_SUPPORT \
+	(ATOM_DEVICE_TV1_SUPPORT  | ATOM_DEVICE_TV2_SUPPORT)
+#define ATOM_DEVICE_LCD_SUPPORT \
+	(ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT)
+
+#define ATOM_DEVICE_CONNECTOR_TYPE_MASK                   0x000000F0
+#define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT                  0x00000004
+#define ATOM_DEVICE_CONNECTOR_VGA                         0x00000001
+#define ATOM_DEVICE_CONNECTOR_DVI_I                       0x00000002
+#define ATOM_DEVICE_CONNECTOR_DVI_D                       0x00000003
+#define ATOM_DEVICE_CONNECTOR_DVI_A                       0x00000004
+#define ATOM_DEVICE_CONNECTOR_SVIDEO                      0x00000005
+#define ATOM_DEVICE_CONNECTOR_COMPOSITE                   0x00000006
+#define ATOM_DEVICE_CONNECTOR_LVDS                        0x00000007
+#define ATOM_DEVICE_CONNECTOR_DIGI_LINK                   0x00000008
+#define ATOM_DEVICE_CONNECTOR_SCART                       0x00000009
+#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A                 0x0000000A
+#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B                 0x0000000B
+#define ATOM_DEVICE_CONNECTOR_CASE_1                      0x0000000E
+#define ATOM_DEVICE_CONNECTOR_DISPLAYPORT                 0x0000000F
+
+#define ATOM_DEVICE_DAC_INFO_MASK                         0x0000000F
+#define ATOM_DEVICE_DAC_INFO_SHIFT                        0x00000000
+#define ATOM_DEVICE_DAC_INFO_NODAC                        0x00000000
+#define ATOM_DEVICE_DAC_INFO_DACA                         0x00000001
+#define ATOM_DEVICE_DAC_INFO_DACB                         0x00000002
+#define ATOM_DEVICE_DAC_INFO_EXDAC                        0x00000003
+
+#define ATOM_DEVICE_I2C_ID_NOI2C                          0x00000000
+
+#define ATOM_DEVICE_I2C_LINEMUX_MASK                      0x0000000F
+#define ATOM_DEVICE_I2C_LINEMUX_SHIFT                     0x00000000
+
+#define ATOM_DEVICE_I2C_ID_MASK                           0x00000070
+#define ATOM_DEVICE_I2C_ID_SHIFT                          0x00000004
+#define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE              0x00000001
+#define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE                  0x00000002
+#define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE                0x00000003	/* For IGP RS600 */
+#define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL                 0x00000004	/* For IGP RS690 */
+
+#define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK                 0x00000080
+#define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT                0x00000007
+#define	ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C            0x00000000
+#define	ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C            0x00000001
+
+/*   usDeviceSupport: */
+/*   Bits0       = 0 - no CRT1 support= 1- CRT1 is supported */
+/*   Bit 1       = 0 - no LCD1 support= 1- LCD1 is supported */
+/*   Bit 2       = 0 - no TV1  support= 1- TV1  is supported */
+/*   Bit 3       = 0 - no DFP1 support= 1- DFP1 is supported */
+/*   Bit 4       = 0 - no CRT2 support= 1- CRT2 is supported */
+/*   Bit 5       = 0 - no LCD2 support= 1- LCD2 is supported */
+/*   Bit 6       = 0 - no TV2  support= 1- TV2  is supported */
+/*   Bit 7       = 0 - no DFP2 support= 1- DFP2 is supported */
+/*   Bit 8       = 0 - no CV   support= 1- CV   is supported */
+/*   Bit 9       = 0 - no DFP3 support= 1- DFP3 is supported */
+/*   Byte1 (Supported Device Info) */
+/*   Bit 0       = = 0 - no CV support= 1- CV is supported */
+/*  */
+/*  */
+
+/*               ucI2C_ConfigID */
+/*     [7:0] - I2C LINE Associate ID */
+/*           = 0   - no I2C */
+/*     [7]               -       HW_Cap        = 1,  [6:0]=HW assisted I2C ID(HW line selection) */
+/*                           =   0,  [6:0]=SW assisted I2C ID */
+/*     [6-4]     - HW_ENGINE_ID  =       1,  HW engine for NON multimedia use */
+/*                           =   2,      HW engine for Multimedia use */
+/*                           =   3-7     Reserved for future I2C engines */
+/*               [3-0] - I2C_LINE_MUX  = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C */
+
+typedef struct _ATOM_I2C_ID_CONFIG {
+#if ATOM_BIG_ENDIAN
+	UCHAR bfHW_Capable:1;
+	UCHAR bfHW_EngineID:3;
+	UCHAR bfI2C_LineMux:4;
+#else
+	UCHAR bfI2C_LineMux:4;
+	UCHAR bfHW_EngineID:3;
+	UCHAR bfHW_Capable:1;
+#endif
+} ATOM_I2C_ID_CONFIG;
+
+typedef union _ATOM_I2C_ID_CONFIG_ACCESS {
+	ATOM_I2C_ID_CONFIG sbfAccess;
+	UCHAR ucAccess;
+} ATOM_I2C_ID_CONFIG_ACCESS;
+
+/****************************************************************************/
+/*  Structure used in GPIO_I2C_InfoTable */
+/****************************************************************************/
+typedef struct _ATOM_GPIO_I2C_ASSIGMENT {
+	USHORT usClkMaskRegisterIndex;
+	USHORT usClkEnRegisterIndex;
+	USHORT usClkY_RegisterIndex;
+	USHORT usClkA_RegisterIndex;
+	USHORT usDataMaskRegisterIndex;
+	USHORT usDataEnRegisterIndex;
+	USHORT usDataY_RegisterIndex;
+	USHORT usDataA_RegisterIndex;
+	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+	UCHAR ucClkMaskShift;
+	UCHAR ucClkEnShift;
+	UCHAR ucClkY_Shift;
+	UCHAR ucClkA_Shift;
+	UCHAR ucDataMaskShift;
+	UCHAR ucDataEnShift;
+	UCHAR ucDataY_Shift;
+	UCHAR ucDataA_Shift;
+	UCHAR ucReserved1;
+	UCHAR ucReserved2;
+} ATOM_GPIO_I2C_ASSIGMENT;
+
+typedef struct _ATOM_GPIO_I2C_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE];
+} ATOM_GPIO_I2C_INFO;
+
+/****************************************************************************/
+/*  Common Structure used in other structures */
+/****************************************************************************/
+
+#ifndef _H2INC
+
+/* Please don't add or expand this bitfield structure below, this one will retire soon.! */
+typedef struct _ATOM_MODE_MISC_INFO {
+#if ATOM_BIG_ENDIAN
+	USHORT Reserved:6;
+	USHORT RGB888:1;
+	USHORT DoubleClock:1;
+	USHORT Interlace:1;
+	USHORT CompositeSync:1;
+	USHORT V_ReplicationBy2:1;
+	USHORT H_ReplicationBy2:1;
+	USHORT VerticalCutOff:1;
+	USHORT VSyncPolarity:1;	/* 0=Active High, 1=Active Low */
+	USHORT HSyncPolarity:1;	/* 0=Active High, 1=Active Low */
+	USHORT HorizontalCutOff:1;
+#else
+	USHORT HorizontalCutOff:1;
+	USHORT HSyncPolarity:1;	/* 0=Active High, 1=Active Low */
+	USHORT VSyncPolarity:1;	/* 0=Active High, 1=Active Low */
+	USHORT VerticalCutOff:1;
+	USHORT H_ReplicationBy2:1;
+	USHORT V_ReplicationBy2:1;
+	USHORT CompositeSync:1;
+	USHORT Interlace:1;
+	USHORT DoubleClock:1;
+	USHORT RGB888:1;
+	USHORT Reserved:6;
+#endif
+} ATOM_MODE_MISC_INFO;
+
+typedef union _ATOM_MODE_MISC_INFO_ACCESS {
+	ATOM_MODE_MISC_INFO sbfAccess;
+	USHORT usAccess;
+} ATOM_MODE_MISC_INFO_ACCESS;
+
+#else
+
+typedef union _ATOM_MODE_MISC_INFO_ACCESS {
+	USHORT usAccess;
+} ATOM_MODE_MISC_INFO_ACCESS;
+
+#endif
+
+/*  usModeMiscInfo- */
+#define ATOM_H_CUTOFF           0x01
+#define ATOM_HSYNC_POLARITY     0x02	/* 0=Active High, 1=Active Low */
+#define ATOM_VSYNC_POLARITY     0x04	/* 0=Active High, 1=Active Low */
+#define ATOM_V_CUTOFF           0x08
+#define ATOM_H_REPLICATIONBY2   0x10
+#define ATOM_V_REPLICATIONBY2   0x20
+#define ATOM_COMPOSITESYNC      0x40
+#define ATOM_INTERLACE          0x80
+#define ATOM_DOUBLE_CLOCK_MODE  0x100
+#define ATOM_RGB888_MODE        0x200
+
+/* usRefreshRate- */
+#define ATOM_REFRESH_43         43
+#define ATOM_REFRESH_47         47
+#define ATOM_REFRESH_56         56
+#define ATOM_REFRESH_60         60
+#define ATOM_REFRESH_65         65
+#define ATOM_REFRESH_70         70
+#define ATOM_REFRESH_72         72
+#define ATOM_REFRESH_75         75
+#define ATOM_REFRESH_85         85
+
+/*  ATOM_MODE_TIMING data are exactly the same as VESA timing data. */
+/*  Translation from EDID to ATOM_MODE_TIMING, use the following formula. */
+/*  */
+/*       VESA_HTOTAL                     =       VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK */
+/*                                               =       EDID_HA + EDID_HBL */
+/*       VESA_HDISP                      =       VESA_ACTIVE     =       EDID_HA */
+/*       VESA_HSYNC_START        =       VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH */
+/*                                               =       EDID_HA + EDID_HSO */
+/*       VESA_HSYNC_WIDTH        =       VESA_HSYNC_TIME =       EDID_HSPW */
+/*       VESA_BORDER                     =       EDID_BORDER */
+
+/****************************************************************************/
+/*  Structure used in SetCRTC_UsingDTDTimingTable */
+/****************************************************************************/
+typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS {
+	USHORT usH_Size;
+	USHORT usH_Blanking_Time;
+	USHORT usV_Size;
+	USHORT usV_Blanking_Time;
+	USHORT usH_SyncOffset;
+	USHORT usH_SyncWidth;
+	USHORT usV_SyncOffset;
+	USHORT usV_SyncWidth;
+	ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+	UCHAR ucH_Border;	/*  From DFP EDID */
+	UCHAR ucV_Border;
+	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
+	UCHAR ucPadding[3];
+} SET_CRTC_USING_DTD_TIMING_PARAMETERS;
+
+/****************************************************************************/
+/*  Structure used in SetCRTC_TimingTable */
+/****************************************************************************/
+typedef struct _SET_CRTC_TIMING_PARAMETERS {
+	USHORT usH_Total;	/*  horizontal total */
+	USHORT usH_Disp;	/*  horizontal display */
+	USHORT usH_SyncStart;	/*  horozontal Sync start */
+	USHORT usH_SyncWidth;	/*  horizontal Sync width */
+	USHORT usV_Total;	/*  vertical total */
+	USHORT usV_Disp;	/*  vertical display */
+	USHORT usV_SyncStart;	/*  vertical Sync start */
+	USHORT usV_SyncWidth;	/*  vertical Sync width */
+	ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
+	UCHAR ucOverscanRight;	/*  right */
+	UCHAR ucOverscanLeft;	/*  left */
+	UCHAR ucOverscanBottom;	/*  bottom */
+	UCHAR ucOverscanTop;	/*  top */
+	UCHAR ucReserved;
+} SET_CRTC_TIMING_PARAMETERS;
+#define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
+
+/****************************************************************************/
+/*  Structure used in StandardVESA_TimingTable */
+/*                    AnalogTV_InfoTable */
+/*                    ComponentVideoInfoTable */
+/****************************************************************************/
+typedef struct _ATOM_MODE_TIMING {
+	USHORT usCRTC_H_Total;
+	USHORT usCRTC_H_Disp;
+	USHORT usCRTC_H_SyncStart;
+	USHORT usCRTC_H_SyncWidth;
+	USHORT usCRTC_V_Total;
+	USHORT usCRTC_V_Disp;
+	USHORT usCRTC_V_SyncStart;
+	USHORT usCRTC_V_SyncWidth;
+	USHORT usPixelClock;	/* in 10Khz unit */
+	ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+	USHORT usCRTC_OverscanRight;
+	USHORT usCRTC_OverscanLeft;
+	USHORT usCRTC_OverscanBottom;
+	USHORT usCRTC_OverscanTop;
+	USHORT usReserve;
+	UCHAR ucInternalModeNumber;
+	UCHAR ucRefreshRate;
+} ATOM_MODE_TIMING;
+
+typedef struct _ATOM_DTD_FORMAT {
+	USHORT usPixClk;
+	USHORT usHActive;
+	USHORT usHBlanking_Time;
+	USHORT usVActive;
+	USHORT usVBlanking_Time;
+	USHORT usHSyncOffset;
+	USHORT usHSyncWidth;
+	USHORT usVSyncOffset;
+	USHORT usVSyncWidth;
+	USHORT usImageHSize;
+	USHORT usImageVSize;
+	UCHAR ucHBorder;
+	UCHAR ucVBorder;
+	ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
+	UCHAR ucInternalModeNumber;
+	UCHAR ucRefreshRate;
+} ATOM_DTD_FORMAT;
+
+/****************************************************************************/
+/*  Structure used in LVDS_InfoTable */
+/*   * Need a document to describe this table */
+/****************************************************************************/
+#define SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
+#define SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
+#define SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
+#define SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
+
+/* Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. */
+/* Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL */
+#define	LCDPANEL_CAP_READ_EDID									0x1
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=1 */
+typedef struct _ATOM_LVDS_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_DTD_FORMAT sLCDTiming;
+	USHORT usModePatchTableOffset;
+	USHORT usSupportedRefreshRate;	/* Refer to panel info table in ATOMBIOS extension Spec. */
+	USHORT usOffDelayInMs;
+	UCHAR ucPowerSequenceDigOntoDEin10Ms;
+	UCHAR ucPowerSequenceDEtoBLOnin10Ms;
+	UCHAR ucLVDS_Misc;	/*  Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */
+	/*  Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */
+	/*  Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */
+	/*  Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */
+	UCHAR ucPanelDefaultRefreshRate;
+	UCHAR ucPanelIdentification;
+	UCHAR ucSS_Id;
+} ATOM_LVDS_INFO;
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=2 */
+typedef struct _ATOM_LVDS_INFO_V12 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_DTD_FORMAT sLCDTiming;
+	USHORT usExtInfoTableOffset;
+	USHORT usSupportedRefreshRate;	/* Refer to panel info table in ATOMBIOS extension Spec. */
+	USHORT usOffDelayInMs;
+	UCHAR ucPowerSequenceDigOntoDEin10Ms;
+	UCHAR ucPowerSequenceDEtoBLOnin10Ms;
+	UCHAR ucLVDS_Misc;	/*  Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */
+	/*  Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */
+	/*  Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */
+	/*  Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */
+	UCHAR ucPanelDefaultRefreshRate;
+	UCHAR ucPanelIdentification;
+	UCHAR ucSS_Id;
+	USHORT usLCDVenderID;
+	USHORT usLCDProductID;
+	UCHAR ucLCDPanel_SpecialHandlingCap;
+	UCHAR ucPanelInfoSize;	/*   start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable */
+	UCHAR ucReserved[2];
+} ATOM_LVDS_INFO_V12;
+
+#define ATOM_LVDS_INFO_LAST  ATOM_LVDS_INFO_V12
+
+typedef struct _ATOM_PATCH_RECORD_MODE {
+	UCHAR ucRecordType;
+	USHORT usHDisp;
+	USHORT usVDisp;
+} ATOM_PATCH_RECORD_MODE;
+
+typedef struct _ATOM_LCD_RTS_RECORD {
+	UCHAR ucRecordType;
+	UCHAR ucRTSValue;
+} ATOM_LCD_RTS_RECORD;
+
+/* !! If the record below exits, it shoud always be the first record for easy use in command table!!! */
+typedef struct _ATOM_LCD_MODE_CONTROL_CAP {
+	UCHAR ucRecordType;
+	USHORT usLCDCap;
+} ATOM_LCD_MODE_CONTROL_CAP;
+
+#define LCD_MODE_CAP_BL_OFF                   1
+#define LCD_MODE_CAP_CRTC_OFF                 2
+#define LCD_MODE_CAP_PANEL_OFF                4
+
+typedef struct _ATOM_FAKE_EDID_PATCH_RECORD {
+	UCHAR ucRecordType;
+	UCHAR ucFakeEDIDLength;
+	UCHAR ucFakeEDIDString[1];	/*  This actually has ucFakeEdidLength elements. */
+} ATOM_FAKE_EDID_PATCH_RECORD;
+
+typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD {
+	UCHAR ucRecordType;
+	USHORT usHSize;
+	USHORT usVSize;
+} ATOM_PANEL_RESOLUTION_PATCH_RECORD;
+
+#define LCD_MODE_PATCH_RECORD_MODE_TYPE       1
+#define LCD_RTS_RECORD_TYPE                   2
+#define LCD_CAP_RECORD_TYPE                   3
+#define LCD_FAKE_EDID_PATCH_RECORD_TYPE       4
+#define LCD_PANEL_RESOLUTION_RECORD_TYPE      5
+#define ATOM_RECORD_END_TYPE                  0xFF
+
+/****************************Spread Spectrum Info Table Definitions **********************/
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=2 */
+typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT {
+	USHORT usSpreadSpectrumPercentage;
+	UCHAR ucSpreadSpectrumType;	/* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
+	UCHAR ucSS_Step;
+	UCHAR ucSS_Delay;
+	UCHAR ucSS_Id;
+	UCHAR ucRecommandedRef_Div;
+	UCHAR ucSS_Range;	/* it was reserved for V11 */
+} ATOM_SPREAD_SPECTRUM_ASSIGNMENT;
+
+#define ATOM_MAX_SS_ENTRY                      16
+#define ATOM_DP_SS_ID1												 0x0f1	/*  SS modulation freq=30k */
+#define ATOM_DP_SS_ID2												 0x0f2	/*  SS modulation freq=33k */
+
+#define ATOM_SS_DOWN_SPREAD_MODE_MASK          0x00000000
+#define ATOM_SS_DOWN_SPREAD_MODE               0x00000000
+#define ATOM_SS_CENTRE_SPREAD_MODE_MASK        0x00000001
+#define ATOM_SS_CENTRE_SPREAD_MODE             0x00000001
+#define ATOM_INTERNAL_SS_MASK                  0x00000000
+#define ATOM_EXTERNAL_SS_MASK                  0x00000002
+#define EXEC_SS_STEP_SIZE_SHIFT                2
+#define EXEC_SS_DELAY_SHIFT                    4
+#define ACTIVEDATA_TO_BLON_DELAY_SHIFT         4
+
+typedef struct _ATOM_SPREAD_SPECTRUM_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY];
+} ATOM_SPREAD_SPECTRUM_INFO;
+
+/****************************************************************************/
+/*  Structure used in AnalogTV_InfoTable (Top level) */
+/****************************************************************************/
+/* ucTVBootUpDefaultStd definiton: */
+
+/* ATOM_TV_NTSC                1 */
+/* ATOM_TV_NTSCJ               2 */
+/* ATOM_TV_PAL                 3 */
+/* ATOM_TV_PALM                4 */
+/* ATOM_TV_PALCN               5 */
+/* ATOM_TV_PALN                6 */
+/* ATOM_TV_PAL60               7 */
+/* ATOM_TV_SECAM               8 */
+
+/* ucTVSuppportedStd definition: */
+#define NTSC_SUPPORT          0x1
+#define NTSCJ_SUPPORT         0x2
+
+#define PAL_SUPPORT           0x4
+#define PALM_SUPPORT          0x8
+#define PALCN_SUPPORT         0x10
+#define PALN_SUPPORT          0x20
+#define PAL60_SUPPORT         0x40
+#define SECAM_SUPPORT         0x80
+
+#define MAX_SUPPORTED_TV_TIMING    2
+
+typedef struct _ATOM_ANALOG_TV_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR ucTV_SupportedStandard;
+	UCHAR ucTV_BootUpDefaultStandard;
+	UCHAR ucExt_TV_ASIC_ID;
+	UCHAR ucExt_TV_ASIC_SlaveAddr;
+	/*ATOM_DTD_FORMAT          aModeTimings[MAX_SUPPORTED_TV_TIMING]; */
+	ATOM_MODE_TIMING aModeTimings[MAX_SUPPORTED_TV_TIMING];
+} ATOM_ANALOG_TV_INFO;
+
+/**************************************************************************/
+/*  VRAM usage and their defintions */
+
+/*  One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. */
+/*  Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. */
+/*  All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned! */
+/*  To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR */
+/*  To Bios:  ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX */
+
+#ifndef VESA_MEMORY_IN_64K_BLOCK
+#define VESA_MEMORY_IN_64K_BLOCK        0x100	/* 256*64K=16Mb (Max. VESA memory is 16Mb!) */
+#endif
+
+#define ATOM_EDID_RAW_DATASIZE          256	/* In Bytes */
+#define ATOM_HWICON_SURFACE_SIZE        4096	/* In Bytes */
+#define ATOM_HWICON_INFOTABLE_SIZE      32
+#define MAX_DTD_MODE_IN_VRAM            6
+#define ATOM_DTD_MODE_SUPPORT_TBL_SIZE  (MAX_DTD_MODE_IN_VRAM*28)	/* 28= (SIZEOF ATOM_DTD_FORMAT) */
+#define ATOM_STD_MODE_SUPPORT_TBL_SIZE  (32*8)	/* 32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT) */
+#define DFP_ENCODER_TYPE_OFFSET					0x80
+#define DP_ENCODER_LANE_NUM_OFFSET			0x84
+#define DP_ENCODER_LINK_RATE_OFFSET			0x88
+
+#define ATOM_HWICON1_SURFACE_ADDR       0
+#define ATOM_HWICON2_SURFACE_ADDR       (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
+#define ATOM_HWICON_INFOTABLE_ADDR      (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
+#define ATOM_CRT1_EDID_ADDR             (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
+#define ATOM_CRT1_DTD_MODE_TBL_ADDR     (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CRT1_STD_MODE_TBL_ADDR	    (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_LCD1_EDID_ADDR             (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_LCD1_DTD_MODE_TBL_ADDR     (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_LCD1_STD_MODE_TBL_ADDR	(ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_TV1_DTD_MODE_TBL_ADDR      (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP1_EDID_ADDR             (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP1_DTD_MODE_TBL_ADDR     (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP1_STD_MODE_TBL_ADDR	    (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_CRT2_EDID_ADDR             (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_CRT2_DTD_MODE_TBL_ADDR     (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CRT2_STD_MODE_TBL_ADDR	    (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_LCD2_EDID_ADDR             (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_LCD2_DTD_MODE_TBL_ADDR     (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_LCD2_STD_MODE_TBL_ADDR	(ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_TV2_EDID_ADDR              (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_TV2_DTD_MODE_TBL_ADDR      (ATOM_TV2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_TV2_STD_MODE_TBL_ADDR	  (ATOM_TV2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP2_EDID_ADDR             (ATOM_TV2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP2_DTD_MODE_TBL_ADDR     (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP2_STD_MODE_TBL_ADDR     (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_CV_EDID_ADDR               (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_CV_DTD_MODE_TBL_ADDR       (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_CV_STD_MODE_TBL_ADDR       (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP3_EDID_ADDR             (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP3_DTD_MODE_TBL_ADDR     (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP3_STD_MODE_TBL_ADDR     (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP4_EDID_ADDR             (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP4_DTD_MODE_TBL_ADDR     (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP4_STD_MODE_TBL_ADDR     (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DFP5_EDID_ADDR             (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DFP5_DTD_MODE_TBL_ADDR     (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
+#define ATOM_DFP5_STD_MODE_TBL_ADDR     (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_DP_TRAINING_TBL_ADDR	(ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+
+#define ATOM_STACK_STORAGE_START        (ATOM_DP_TRAINING_TBL_ADDR + 256)
+#define ATOM_STACK_STORAGE_END          (ATOM_STACK_STORAGE_START + 512)
+
+/* The size below is in Kb! */
+#define ATOM_VRAM_RESERVE_SIZE         ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
+
+#define	ATOM_VRAM_OPERATION_FLAGS_MASK         0xC0000000L
+#define ATOM_VRAM_OPERATION_FLAGS_SHIFT        30
+#define	ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION   0x1
+#define	ATOM_VRAM_BLOCK_NEEDS_RESERVATION      0x0
+
+/***********************************************************************************/
+/*  Structure used in VRAM_UsageByFirmwareTable */
+/*  Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm */
+/*         at running time. */
+/*  note2: From RV770, the memory is more than 32bit addressable, so we will change */
+/*         ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains */
+/*         exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware */
+/*         (in offset to start of memory address) is KB aligned instead of byte aligend. */
+/***********************************************************************************/
+#define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO			1
+
+typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO {
+	ULONG ulStartAddrUsedByFirmware;
+	USHORT usFirmwareUseInKb;
+	USHORT usReserved;
+} ATOM_FIRMWARE_VRAM_RESERVE_INFO;
+
+typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_FIRMWARE_VRAM_RESERVE_INFO
+	    asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
+} ATOM_VRAM_USAGE_BY_FIRMWARE;
+
+/****************************************************************************/
+/*  Structure used in GPIO_Pin_LUTTable */
+/****************************************************************************/
+typedef struct _ATOM_GPIO_PIN_ASSIGNMENT {
+	USHORT usGpioPin_AIndex;
+	UCHAR ucGpioPinBitShift;
+	UCHAR ucGPIO_ID;
+} ATOM_GPIO_PIN_ASSIGNMENT;
+
+typedef struct _ATOM_GPIO_PIN_LUT {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1];
+} ATOM_GPIO_PIN_LUT;
+
+/****************************************************************************/
+/*  Structure used in ComponentVideoInfoTable */
+/****************************************************************************/
+#define GPIO_PIN_ACTIVE_HIGH          0x1
+
+#define MAX_SUPPORTED_CV_STANDARDS    5
+
+/*  definitions for ATOM_D_INFO.ucSettings */
+#define ATOM_GPIO_SETTINGS_BITSHIFT_MASK  0x1F	/*  [4:0] */
+#define ATOM_GPIO_SETTINGS_RESERVED_MASK  0x60	/*  [6:5] = must be zeroed out */
+#define ATOM_GPIO_SETTINGS_ACTIVE_MASK    0x80	/*  [7] */
+
+typedef struct _ATOM_GPIO_INFO {
+	USHORT usAOffset;
+	UCHAR ucSettings;
+	UCHAR ucReserved;
+} ATOM_GPIO_INFO;
+
+/*  definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector) */
+#define ATOM_CV_RESTRICT_FORMAT_SELECTION           0x2
+
+/*  definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i */
+#define ATOM_GPIO_DEFAULT_MODE_EN                   0x80	/* [7]; */
+#define ATOM_GPIO_SETTING_PERMODE_MASK              0x7F	/* [6:0] */
+
+/*  definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode */
+/* Line 3 out put 5V. */
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A       0x01	/* represent gpio 3 state for 16:9 */
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B       0x02	/* represent gpio 4 state for 16:9 */
+#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT   0x0
+
+/* Line 3 out put 2.2V */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04	/* represent gpio 3 state for 4:3 Letter box */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08	/* represent gpio 4 state for 4:3 Letter box */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
+
+/* Line 3 out put 0V */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A        0x10	/* represent gpio 3 state for 4:3 */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B        0x20	/* represent gpio 4 state for 4:3 */
+#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT    0x4
+
+#define ATOM_CV_LINE3_ASPECTRATIO_MASK              0x3F	/*  bit [5:0] */
+
+#define ATOM_CV_LINE3_ASPECTRATIO_EXIST             0x80	/* bit 7 */
+
+/* GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks. */
+#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A   3	/* bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */
+#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B   4	/* bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */
+
+typedef struct _ATOM_COMPONENT_VIDEO_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usMask_PinRegisterIndex;
+	USHORT usEN_PinRegisterIndex;
+	USHORT usY_PinRegisterIndex;
+	USHORT usA_PinRegisterIndex;
+	UCHAR ucBitShift;
+	UCHAR ucPinActiveState;	/* ucPinActiveState: Bit0=1 active high, =0 active low */
+	ATOM_DTD_FORMAT sReserved;	/*  must be zeroed out */
+	UCHAR ucMiscInfo;
+	UCHAR uc480i;
+	UCHAR uc480p;
+	UCHAR uc720p;
+	UCHAR uc1080i;
+	UCHAR ucLetterBoxMode;
+	UCHAR ucReserved[3];
+	UCHAR ucNumOfWbGpioBlocks;	/* For Component video D-Connector support. If zere, NTSC type connector */
+	ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
+	ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
+} ATOM_COMPONENT_VIDEO_INFO;
+
+/* ucTableFormatRevision=2 */
+/* ucTableContentRevision=1 */
+typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR ucMiscInfo;
+	UCHAR uc480i;
+	UCHAR uc480p;
+	UCHAR uc720p;
+	UCHAR uc1080i;
+	UCHAR ucReserved;
+	UCHAR ucLetterBoxMode;
+	UCHAR ucNumOfWbGpioBlocks;	/* For Component video D-Connector support. If zere, NTSC type connector */
+	ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
+	ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
+} ATOM_COMPONENT_VIDEO_INFO_V21;
+
+#define ATOM_COMPONENT_VIDEO_INFO_LAST  ATOM_COMPONENT_VIDEO_INFO_V21
+
+/****************************************************************************/
+/*  Structure used in object_InfoTable */
+/****************************************************************************/
+typedef struct _ATOM_OBJECT_HEADER {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usDeviceSupport;
+	USHORT usConnectorObjectTableOffset;
+	USHORT usRouterObjectTableOffset;
+	USHORT usEncoderObjectTableOffset;
+	USHORT usProtectionObjectTableOffset;	/* only available when Protection block is independent. */
+	USHORT usDisplayPathTableOffset;
+} ATOM_OBJECT_HEADER;
+
+typedef struct _ATOM_DISPLAY_OBJECT_PATH {
+	USHORT usDeviceTag;	/* supported device */
+	USHORT usSize;		/* the size of ATOM_DISPLAY_OBJECT_PATH */
+	USHORT usConnObjectId;	/* Connector Object ID */
+	USHORT usGPUObjectId;	/* GPU ID */
+	USHORT usGraphicObjIds[1];	/* 1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. */
+} ATOM_DISPLAY_OBJECT_PATH;
+
+typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE {
+	UCHAR ucNumOfDispPath;
+	UCHAR ucVersion;
+	UCHAR ucPadding[2];
+	ATOM_DISPLAY_OBJECT_PATH asDispPath[1];
+} ATOM_DISPLAY_OBJECT_PATH_TABLE;
+
+typedef struct _ATOM_OBJECT	/* each object has this structure */
+{
+	USHORT usObjectID;
+	USHORT usSrcDstTableOffset;
+	USHORT usRecordOffset;	/* this pointing to a bunch of records defined below */
+	USHORT usReserved;
+} ATOM_OBJECT;
+
+typedef struct _ATOM_OBJECT_TABLE	/* Above 4 object table offset pointing to a bunch of objects all have this structure */
+{
+	UCHAR ucNumberOfObjects;
+	UCHAR ucPadding[3];
+	ATOM_OBJECT asObjects[1];
+} ATOM_OBJECT_TABLE;
+
+typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT	/* usSrcDstTableOffset pointing to this structure */
+{
+	UCHAR ucNumberOfSrc;
+	USHORT usSrcObjectID[1];
+	UCHAR ucNumberOfDst;
+	USHORT usDstObjectID[1];
+} ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;
+
+/* Related definitions, all records are differnt but they have a commond header */
+typedef struct _ATOM_COMMON_RECORD_HEADER {
+	UCHAR ucRecordType;	/* An emun to indicate the record type */
+	UCHAR ucRecordSize;	/* The size of the whole record in byte */
+} ATOM_COMMON_RECORD_HEADER;
+
+#define ATOM_I2C_RECORD_TYPE                           1
+#define ATOM_HPD_INT_RECORD_TYPE                       2
+#define ATOM_OUTPUT_PROTECTION_RECORD_TYPE             3
+#define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE          4
+#define	ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE	     5	/* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
+#define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE          6	/* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
+#define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE      7
+#define ATOM_JTAG_RECORD_TYPE                          8	/* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
+#define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE              9
+#define ATOM_ENCODER_DVO_CF_RECORD_TYPE               10
+#define ATOM_CONNECTOR_CF_RECORD_TYPE                 11
+#define	ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE	      12
+#define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE  13
+#define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE				14
+#define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE					15
+
+/* Must be updated when new record type is added,equal to that record definition! */
+#define ATOM_MAX_OBJECT_RECORD_NUMBER             ATOM_CONNECTOR_CF_RECORD_TYPE
+
+typedef struct _ATOM_I2C_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	ATOM_I2C_ID_CONFIG sucI2cId;
+	UCHAR ucI2CAddr;	/* The slave address, it's 0 when the record is attached to connector for DDC */
+} ATOM_I2C_RECORD;
+
+typedef struct _ATOM_HPD_INT_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucHPDIntGPIOID;	/* Corresponding block in GPIO_PIN_INFO table gives the pin info */
+	UCHAR ucPluggged_PinState;
+} ATOM_HPD_INT_RECORD;
+
+typedef struct _ATOM_OUTPUT_PROTECTION_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucProtectionFlag;
+	UCHAR ucReserved;
+} ATOM_OUTPUT_PROTECTION_RECORD;
+
+typedef struct _ATOM_CONNECTOR_DEVICE_TAG {
+	ULONG ulACPIDeviceEnum;	/* Reserved for now */
+	USHORT usDeviceID;	/* This Id is same as "ATOM_DEVICE_XXX_SUPPORT" */
+	USHORT usPadding;
+} ATOM_CONNECTOR_DEVICE_TAG;
+
+typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucNumberOfDevice;
+	UCHAR ucReserved;
+	ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1];	/* This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation */
+} ATOM_CONNECTOR_DEVICE_TAG_RECORD;
+
+typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucConfigGPIOID;
+	UCHAR ucConfigGPIOState;	/* Set to 1 when it's active high to enable external flow in */
+	UCHAR ucFlowinGPIPID;
+	UCHAR ucExtInGPIPID;
+} ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD;
+
+typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucCTL1GPIO_ID;
+	UCHAR ucCTL1GPIOState;	/* Set to 1 when it's active high */
+	UCHAR ucCTL2GPIO_ID;
+	UCHAR ucCTL2GPIOState;	/* Set to 1 when it's active high */
+	UCHAR ucCTL3GPIO_ID;
+	UCHAR ucCTL3GPIOState;	/* Set to 1 when it's active high */
+	UCHAR ucCTLFPGA_IN_ID;
+	UCHAR ucPadding[3];
+} ATOM_ENCODER_FPGA_CONTROL_RECORD;
+
+typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucGPIOID;		/* Corresponding block in GPIO_PIN_INFO table gives the pin info */
+	UCHAR ucTVActiveState;	/* Indicating when the pin==0 or 1 when TV is connected */
+} ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD;
+
+typedef struct _ATOM_JTAG_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucTMSGPIO_ID;
+	UCHAR ucTMSGPIOState;	/* Set to 1 when it's active high */
+	UCHAR ucTCKGPIO_ID;
+	UCHAR ucTCKGPIOState;	/* Set to 1 when it's active high */
+	UCHAR ucTDOGPIO_ID;
+	UCHAR ucTDOGPIOState;	/* Set to 1 when it's active high */
+	UCHAR ucTDIGPIO_ID;
+	UCHAR ucTDIGPIOState;	/* Set to 1 when it's active high */
+	UCHAR ucPadding[2];
+} ATOM_JTAG_RECORD;
+
+/* The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually */
+typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR {
+	UCHAR ucGPIOID;		/*  GPIO_ID, find the corresponding ID in GPIO_LUT table */
+	UCHAR ucGPIO_PinState;	/*  Pin state showing how to set-up the pin */
+} ATOM_GPIO_PIN_CONTROL_PAIR;
+
+typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucFlags;		/*  Future expnadibility */
+	UCHAR ucNumberOfPins;	/*  Number of GPIO pins used to control the object */
+	ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1];	/*  the real gpio pin pair determined by number of pins ucNumberOfPins */
+} ATOM_OBJECT_GPIO_CNTL_RECORD;
+
+/* Definitions for GPIO pin state */
+#define GPIO_PIN_TYPE_INPUT             0x00
+#define GPIO_PIN_TYPE_OUTPUT            0x10
+#define GPIO_PIN_TYPE_HW_CONTROL        0x20
+
+/* For GPIO_PIN_TYPE_OUTPUT the following is defined */
+#define GPIO_PIN_OUTPUT_STATE_MASK      0x01
+#define GPIO_PIN_OUTPUT_STATE_SHIFT     0
+#define GPIO_PIN_STATE_ACTIVE_LOW       0x0
+#define GPIO_PIN_STATE_ACTIVE_HIGH      0x1
+
+typedef struct _ATOM_ENCODER_DVO_CF_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	ULONG ulStrengthControl;	/*  DVOA strength control for CF */
+	UCHAR ucPadding[2];
+} ATOM_ENCODER_DVO_CF_RECORD;
+
+/*  value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle */
+#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA   1
+#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB   2
+
+typedef struct _ATOM_CONNECTOR_CF_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	USHORT usMaxPixClk;
+	UCHAR ucFlowCntlGpioId;
+	UCHAR ucSwapCntlGpioId;
+	UCHAR ucConnectedDvoBundle;
+	UCHAR ucPadding;
+} ATOM_CONNECTOR_CF_RECORD;
+
+typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	ATOM_DTD_FORMAT asTiming;
+} ATOM_CONNECTOR_HARDCODE_DTD_RECORD;
+
+typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;	/* ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE */
+	UCHAR ucSubConnectorType;	/* CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A */
+	UCHAR ucReserved;
+} ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD;
+
+typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucMuxType;	/* decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state */
+	UCHAR ucMuxControlPin;
+	UCHAR ucMuxState[2];	/* for alligment purpose */
+} ATOM_ROUTER_DDC_PATH_SELECT_RECORD;
+
+typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD {
+	ATOM_COMMON_RECORD_HEADER sheader;
+	UCHAR ucMuxType;
+	UCHAR ucMuxControlPin;
+	UCHAR ucMuxState[2];	/* for alligment purpose */
+} ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD;
+
+/*  define ucMuxType */
+#define ATOM_ROUTER_MUX_PIN_STATE_MASK								0x0f
+#define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT		0x01
+
+/****************************************************************************/
+/*  ASIC voltage data table */
+/****************************************************************************/
+typedef struct _ATOM_VOLTAGE_INFO_HEADER {
+	USHORT usVDDCBaseLevel;	/* In number of 50mv unit */
+	USHORT usReserved;	/* For possible extension table offset */
+	UCHAR ucNumOfVoltageEntries;
+	UCHAR ucBytesPerVoltageEntry;
+	UCHAR ucVoltageStep;	/* Indicating in how many mv increament is one step, 0.5mv unit */
+	UCHAR ucDefaultVoltageEntry;
+	UCHAR ucVoltageControlI2cLine;
+	UCHAR ucVoltageControlAddress;
+	UCHAR ucVoltageControlOffset;
+} ATOM_VOLTAGE_INFO_HEADER;
+
+typedef struct _ATOM_VOLTAGE_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_VOLTAGE_INFO_HEADER viHeader;
+	UCHAR ucVoltageEntries[64];	/* 64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry */
+} ATOM_VOLTAGE_INFO;
+
+typedef struct _ATOM_VOLTAGE_FORMULA {
+	USHORT usVoltageBaseLevel;	/*  In number of 1mv unit */
+	USHORT usVoltageStep;	/*  Indicating in how many mv increament is one step, 1mv unit */
+	UCHAR ucNumOfVoltageEntries;	/*  Number of Voltage Entry, which indicate max Voltage */
+	UCHAR ucFlag;		/*  bit0=0 :step is 1mv =1 0.5mv */
+	UCHAR ucBaseVID;	/*  if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep */
+	UCHAR ucReserved;
+	UCHAR ucVIDAdjustEntries[32];	/*  32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries */
+} ATOM_VOLTAGE_FORMULA;
+
+typedef struct _ATOM_VOLTAGE_CONTROL {
+	UCHAR ucVoltageControlId;	/* Indicate it is controlled by I2C or GPIO or HW state machine */
+	UCHAR ucVoltageControlI2cLine;
+	UCHAR ucVoltageControlAddress;
+	UCHAR ucVoltageControlOffset;
+	USHORT usGpioPin_AIndex;	/* GPIO_PAD register index */
+	UCHAR ucGpioPinBitShift[9];	/* at most 8 pin support 255 VIDs, termintate with 0xff */
+	UCHAR ucReserved;
+} ATOM_VOLTAGE_CONTROL;
+
+/*  Define ucVoltageControlId */
+#define	VOLTAGE_CONTROLLED_BY_HW							0x00
+#define	VOLTAGE_CONTROLLED_BY_I2C_MASK				0x7F
+#define	VOLTAGE_CONTROLLED_BY_GPIO						0x80
+#define	VOLTAGE_CONTROL_ID_LM64								0x01	/* I2C control, used for R5xx Core Voltage */
+#define	VOLTAGE_CONTROL_ID_DAC								0x02	/* I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI */
+#define	VOLTAGE_CONTROL_ID_VT116xM						0x03	/* I2C control, used for R6xx Core Voltage */
+#define VOLTAGE_CONTROL_ID_DS4402							0x04
+
+typedef struct _ATOM_VOLTAGE_OBJECT {
+	UCHAR ucVoltageType;	/* Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI */
+	UCHAR ucSize;		/* Size of Object */
+	ATOM_VOLTAGE_CONTROL asControl;	/* describ how to control */
+	ATOM_VOLTAGE_FORMULA asFormula;	/* Indicate How to convert real Voltage to VID */
+} ATOM_VOLTAGE_OBJECT;
+
+typedef struct _ATOM_VOLTAGE_OBJECT_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_VOLTAGE_OBJECT asVoltageObj[3];	/* Info for Voltage control */
+} ATOM_VOLTAGE_OBJECT_INFO;
+
+typedef struct _ATOM_LEAKID_VOLTAGE {
+	UCHAR ucLeakageId;
+	UCHAR ucReserved;
+	USHORT usVoltage;
+} ATOM_LEAKID_VOLTAGE;
+
+typedef struct _ATOM_ASIC_PROFILE_VOLTAGE {
+	UCHAR ucProfileId;
+	UCHAR ucReserved;
+	USHORT usSize;
+	USHORT usEfuseSpareStartAddr;
+	USHORT usFuseIndex[8];	/* from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id, */
+	ATOM_LEAKID_VOLTAGE asLeakVol[2];	/* Leakid and relatd voltage */
+} ATOM_ASIC_PROFILE_VOLTAGE;
+
+/* ucProfileId */
+#define	ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE			1
+#define	ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE			1
+#define	ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE					2
+
+typedef struct _ATOM_ASIC_PROFILING_INFO {
+	ATOM_COMMON_TABLE_HEADER asHeader;
+	ATOM_ASIC_PROFILE_VOLTAGE asVoltage;
+} ATOM_ASIC_PROFILING_INFO;
+
+typedef struct _ATOM_POWER_SOURCE_OBJECT {
+	UCHAR ucPwrSrcId;	/*  Power source */
+	UCHAR ucPwrSensorType;	/*  GPIO, I2C or none */
+	UCHAR ucPwrSensId;	/*  if GPIO detect, it is GPIO id,  if I2C detect, it is I2C id */
+	UCHAR ucPwrSensSlaveAddr;	/*  Slave address if I2C detect */
+	UCHAR ucPwrSensRegIndex;	/*  I2C register Index if I2C detect */
+	UCHAR ucPwrSensRegBitMask;	/*  detect which bit is used if I2C detect */
+	UCHAR ucPwrSensActiveState;	/*  high active or low active */
+	UCHAR ucReserve[3];	/*  reserve */
+	USHORT usSensPwr;	/*  in unit of watt */
+} ATOM_POWER_SOURCE_OBJECT;
+
+typedef struct _ATOM_POWER_SOURCE_INFO {
+	ATOM_COMMON_TABLE_HEADER asHeader;
+	UCHAR asPwrbehave[16];
+	ATOM_POWER_SOURCE_OBJECT asPwrObj[1];
+} ATOM_POWER_SOURCE_INFO;
+
+/* Define ucPwrSrcId */
+#define POWERSOURCE_PCIE_ID1						0x00
+#define POWERSOURCE_6PIN_CONNECTOR_ID1	0x01
+#define POWERSOURCE_8PIN_CONNECTOR_ID1	0x02
+#define POWERSOURCE_6PIN_CONNECTOR_ID2	0x04
+#define POWERSOURCE_8PIN_CONNECTOR_ID2	0x08
+
+/* define ucPwrSensorId */
+#define POWER_SENSOR_ALWAYS							0x00
+#define POWER_SENSOR_GPIO								0x01
+#define POWER_SENSOR_I2C								0x02
+
+/**************************************************************************/
+/*  This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design */
+/* Memory SS Info Table */
+/* Define Memory Clock SS chip ID */
+#define ICS91719  1
+#define ICS91720  2
+
+/* Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol */
+typedef struct _ATOM_I2C_DATA_RECORD {
+	UCHAR ucNunberOfBytes;	/* Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop" */
+	UCHAR ucI2CData[1];	/* I2C data in bytes, should be less than 16 bytes usually */
+} ATOM_I2C_DATA_RECORD;
+
+/* Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information */
+typedef struct _ATOM_I2C_DEVICE_SETUP_INFO {
+	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;	/* I2C line and HW/SW assisted cap. */
+	UCHAR ucSSChipID;	/* SS chip being used */
+	UCHAR ucSSChipSlaveAddr;	/* Slave Address to set up this SS chip */
+	UCHAR ucNumOfI2CDataRecords;	/* number of data block */
+	ATOM_I2C_DATA_RECORD asI2CData[1];
+} ATOM_I2C_DEVICE_SETUP_INFO;
+
+/* ========================================================================================== */
+typedef struct _ATOM_ASIC_MVDD_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1];
+} ATOM_ASIC_MVDD_INFO;
+
+/* ========================================================================================== */
+#define ATOM_MCLK_SS_INFO         ATOM_ASIC_MVDD_INFO
+
+/* ========================================================================================== */
+/**************************************************************************/
+
+typedef struct _ATOM_ASIC_SS_ASSIGNMENT {
+	ULONG ulTargetClockRange;	/* Clock Out frequence (VCO ), in unit of 10Khz */
+	USHORT usSpreadSpectrumPercentage;	/* in unit of 0.01% */
+	USHORT usSpreadRateInKhz;	/* in unit of kHz, modulation freq */
+	UCHAR ucClockIndication;	/* Indicate which clock source needs SS */
+	UCHAR ucSpreadSpectrumMode;	/* Bit1=0 Down Spread,=1 Center Spread. */
+	UCHAR ucReserved[2];
+} ATOM_ASIC_SS_ASSIGNMENT;
+
+/* Define ucSpreadSpectrumType */
+#define ASIC_INTERNAL_MEMORY_SS			1
+#define ASIC_INTERNAL_ENGINE_SS			2
+#define ASIC_INTERNAL_UVD_SS				3
+
+typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4];
+} ATOM_ASIC_INTERNAL_SS_INFO;
+
+/* ==============================Scratch Pad Definition Portion=============================== */
+#define ATOM_DEVICE_CONNECT_INFO_DEF  0
+#define ATOM_ROM_LOCATION_DEF         1
+#define ATOM_TV_STANDARD_DEF          2
+#define ATOM_ACTIVE_INFO_DEF          3
+#define ATOM_LCD_INFO_DEF             4
+#define ATOM_DOS_REQ_INFO_DEF         5
+#define ATOM_ACC_CHANGE_INFO_DEF      6
+#define ATOM_DOS_MODE_INFO_DEF        7
+#define ATOM_I2C_CHANNEL_STATUS_DEF   8
+#define ATOM_I2C_CHANNEL_STATUS1_DEF  9
+
+/*  BIOS_0_SCRATCH Definition */
+#define ATOM_S0_CRT1_MONO               0x00000001L
+#define ATOM_S0_CRT1_COLOR              0x00000002L
+#define ATOM_S0_CRT1_MASK               (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
+
+#define ATOM_S0_TV1_COMPOSITE_A         0x00000004L
+#define ATOM_S0_TV1_SVIDEO_A            0x00000008L
+#define ATOM_S0_TV1_MASK_A              (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
+
+#define ATOM_S0_CV_A                    0x00000010L
+#define ATOM_S0_CV_DIN_A                0x00000020L
+#define ATOM_S0_CV_MASK_A               (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
+
+#define ATOM_S0_CRT2_MONO               0x00000100L
+#define ATOM_S0_CRT2_COLOR              0x00000200L
+#define ATOM_S0_CRT2_MASK               (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
+
+#define ATOM_S0_TV1_COMPOSITE           0x00000400L
+#define ATOM_S0_TV1_SVIDEO              0x00000800L
+#define ATOM_S0_TV1_SCART               0x00004000L
+#define ATOM_S0_TV1_MASK                (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
+
+#define ATOM_S0_CV                      0x00001000L
+#define ATOM_S0_CV_DIN                  0x00002000L
+#define ATOM_S0_CV_MASK                 (ATOM_S0_CV+ATOM_S0_CV_DIN)
+
+#define ATOM_S0_DFP1                    0x00010000L
+#define ATOM_S0_DFP2                    0x00020000L
+#define ATOM_S0_LCD1                    0x00040000L
+#define ATOM_S0_LCD2                    0x00080000L
+#define ATOM_S0_TV2                     0x00100000L
+#define ATOM_S0_DFP3			0x00200000L
+#define ATOM_S0_DFP4			0x00400000L
+#define ATOM_S0_DFP5			0x00800000L
+
+#define ATOM_S0_DFP_MASK \
+	(ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5)
+
+#define ATOM_S0_FAD_REGISTER_BUG        0x02000000L	/*  If set, indicates we are running a PCIE asic with */
+						    /*  the FAD/HDP reg access bug.  Bit is read by DAL */
+
+#define ATOM_S0_THERMAL_STATE_MASK      0x1C000000L
+#define ATOM_S0_THERMAL_STATE_SHIFT     26
+
+#define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
+#define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
+
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC     1
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC     2
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S0_CRT1_MONOb0             0x01
+#define ATOM_S0_CRT1_COLORb0            0x02
+#define ATOM_S0_CRT1_MASKb0             (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
+
+#define ATOM_S0_TV1_COMPOSITEb0         0x04
+#define ATOM_S0_TV1_SVIDEOb0            0x08
+#define ATOM_S0_TV1_MASKb0              (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
+
+#define ATOM_S0_CVb0                    0x10
+#define ATOM_S0_CV_DINb0                0x20
+#define ATOM_S0_CV_MASKb0               (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
+
+#define ATOM_S0_CRT2_MONOb1             0x01
+#define ATOM_S0_CRT2_COLORb1            0x02
+#define ATOM_S0_CRT2_MASKb1             (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
+
+#define ATOM_S0_TV1_COMPOSITEb1         0x04
+#define ATOM_S0_TV1_SVIDEOb1            0x08
+#define ATOM_S0_TV1_SCARTb1             0x40
+#define ATOM_S0_TV1_MASKb1              (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
+
+#define ATOM_S0_CVb1                    0x10
+#define ATOM_S0_CV_DINb1                0x20
+#define ATOM_S0_CV_MASKb1               (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
+
+#define ATOM_S0_DFP1b2                  0x01
+#define ATOM_S0_DFP2b2                  0x02
+#define ATOM_S0_LCD1b2                  0x04
+#define ATOM_S0_LCD2b2                  0x08
+#define ATOM_S0_TV2b2                   0x10
+#define ATOM_S0_DFP3b2									0x20
+
+#define ATOM_S0_THERMAL_STATE_MASKb3    0x1C
+#define ATOM_S0_THERMAL_STATE_SHIFTb3   2
+
+#define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
+#define ATOM_S0_LCD1_SHIFT              18
+
+/*  BIOS_1_SCRATCH Definition */
+#define ATOM_S1_ROM_LOCATION_MASK       0x0000FFFFL
+#define ATOM_S1_PCI_BUS_DEV_MASK        0xFFFF0000L
+
+/*       BIOS_2_SCRATCH Definition */
+#define ATOM_S2_TV1_STANDARD_MASK       0x0000000FL
+#define ATOM_S2_CURRENT_BL_LEVEL_MASK   0x0000FF00L
+#define ATOM_S2_CURRENT_BL_LEVEL_SHIFT  8
+
+#define ATOM_S2_CRT1_DPMS_STATE         0x00010000L
+#define ATOM_S2_LCD1_DPMS_STATE	        0x00020000L
+#define ATOM_S2_TV1_DPMS_STATE          0x00040000L
+#define ATOM_S2_DFP1_DPMS_STATE         0x00080000L
+#define ATOM_S2_CRT2_DPMS_STATE         0x00100000L
+#define ATOM_S2_LCD2_DPMS_STATE         0x00200000L
+#define ATOM_S2_TV2_DPMS_STATE          0x00400000L
+#define ATOM_S2_DFP2_DPMS_STATE         0x00800000L
+#define ATOM_S2_CV_DPMS_STATE           0x01000000L
+#define ATOM_S2_DFP3_DPMS_STATE					0x02000000L
+#define ATOM_S2_DFP4_DPMS_STATE					0x04000000L
+#define ATOM_S2_DFP5_DPMS_STATE					0x08000000L
+
+#define ATOM_S2_DFP_DPM_STATE \
+	(ATOM_S2_DFP1_DPMS_STATE | ATOM_S2_DFP2_DPMS_STATE | \
+	 ATOM_S2_DFP3_DPMS_STATE | ATOM_S2_DFP4_DPMS_STATE | \
+	 ATOM_S2_DFP5_DPMS_STATE)
+
+#define ATOM_S2_DEVICE_DPMS_STATE \
+	(ATOM_S2_CRT1_DPMS_STATE + ATOM_S2_LCD1_DPMS_STATE + \
+	 ATOM_S2_TV1_DPMS_STATE + ATOM_S2_DFP_DPMS_STATE + \
+	 ATOM_S2_CRT2_DPMS_STATE + ATOM_S2_LCD2_DPMS_STATE + \
+	 ATOM_S2_TV2_DPMS_STATE + ATOM_S2_CV_DPMS_STATE)
+
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK       0x0C000000L
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE     0x10000000L
+
+#define ATOM_S2_VRI_BRIGHT_ENABLE       0x20000000L
+
+#define ATOM_S2_DISPLAY_ROTATION_0_DEGREE     0x0
+#define ATOM_S2_DISPLAY_ROTATION_90_DEGREE    0x1
+#define ATOM_S2_DISPLAY_ROTATION_180_DEGREE   0x2
+#define ATOM_S2_DISPLAY_ROTATION_270_DEGREE   0x3
+#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
+#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK   0xC0000000L
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S2_TV1_STANDARD_MASKb0     0x0F
+#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
+#define ATOM_S2_CRT1_DPMS_STATEb2       0x01
+#define ATOM_S2_LCD1_DPMS_STATEb2       0x02
+#define ATOM_S2_TV1_DPMS_STATEb2        0x04
+#define ATOM_S2_DFP1_DPMS_STATEb2       0x08
+#define ATOM_S2_CRT2_DPMS_STATEb2       0x10
+#define ATOM_S2_LCD2_DPMS_STATEb2       0x20
+#define ATOM_S2_TV2_DPMS_STATEb2        0x40
+#define ATOM_S2_DFP2_DPMS_STATEb2       0x80
+#define ATOM_S2_CV_DPMS_STATEb3         0x01
+#define ATOM_S2_DFP3_DPMS_STATEb3				0x02
+#define ATOM_S2_DFP4_DPMS_STATEb3				0x04
+#define ATOM_S2_DFP5_DPMS_STATEb3				0x08
+
+#define ATOM_S2_DEVICE_DPMS_MASKw1      0x3FF
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3     0x0C
+#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3   0x10
+#define ATOM_S2_VRI_BRIGHT_ENABLEb3     0x20
+#define ATOM_S2_ROTATION_STATE_MASKb3   0xC0
+
+/*  BIOS_3_SCRATCH Definition */
+#define ATOM_S3_CRT1_ACTIVE             0x00000001L
+#define ATOM_S3_LCD1_ACTIVE             0x00000002L
+#define ATOM_S3_TV1_ACTIVE              0x00000004L
+#define ATOM_S3_DFP1_ACTIVE             0x00000008L
+#define ATOM_S3_CRT2_ACTIVE             0x00000010L
+#define ATOM_S3_LCD2_ACTIVE             0x00000020L
+#define ATOM_S3_TV2_ACTIVE              0x00000040L
+#define ATOM_S3_DFP2_ACTIVE             0x00000080L
+#define ATOM_S3_CV_ACTIVE               0x00000100L
+#define ATOM_S3_DFP3_ACTIVE							0x00000200L
+#define ATOM_S3_DFP4_ACTIVE							0x00000400L
+#define ATOM_S3_DFP5_ACTIVE							0x00000800L
+
+#define ATOM_S3_DEVICE_ACTIVE_MASK      0x000003FFL
+
+#define ATOM_S3_LCD_FULLEXPANSION_ACTIVE         0x00001000L
+#define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
+
+#define ATOM_S3_CRT1_CRTC_ACTIVE        0x00010000L
+#define ATOM_S3_LCD1_CRTC_ACTIVE        0x00020000L
+#define ATOM_S3_TV1_CRTC_ACTIVE         0x00040000L
+#define ATOM_S3_DFP1_CRTC_ACTIVE        0x00080000L
+#define ATOM_S3_CRT2_CRTC_ACTIVE        0x00100000L
+#define ATOM_S3_LCD2_CRTC_ACTIVE        0x00200000L
+#define ATOM_S3_TV2_CRTC_ACTIVE         0x00400000L
+#define ATOM_S3_DFP2_CRTC_ACTIVE        0x00800000L
+#define ATOM_S3_CV_CRTC_ACTIVE          0x01000000L
+#define ATOM_S3_DFP3_CRTC_ACTIVE				0x02000000L
+#define ATOM_S3_DFP4_CRTC_ACTIVE				0x04000000L
+#define ATOM_S3_DFP5_CRTC_ACTIVE				0x08000000L
+
+#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
+#define ATOM_S3_ASIC_GUI_ENGINE_HUNG    0x20000000L
+#define ATOM_S3_ALLOW_FAST_PWR_SWITCH   0x40000000L
+#define ATOM_S3_RQST_GPU_USE_MIN_PWR    0x80000000L
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S3_CRT1_ACTIVEb0           0x01
+#define ATOM_S3_LCD1_ACTIVEb0           0x02
+#define ATOM_S3_TV1_ACTIVEb0            0x04
+#define ATOM_S3_DFP1_ACTIVEb0           0x08
+#define ATOM_S3_CRT2_ACTIVEb0           0x10
+#define ATOM_S3_LCD2_ACTIVEb0           0x20
+#define ATOM_S3_TV2_ACTIVEb0            0x40
+#define ATOM_S3_DFP2_ACTIVEb0           0x80
+#define ATOM_S3_CV_ACTIVEb1             0x01
+#define ATOM_S3_DFP3_ACTIVEb1						0x02
+#define ATOM_S3_DFP4_ACTIVEb1						0x04
+#define ATOM_S3_DFP5_ACTIVEb1						0x08
+
+#define ATOM_S3_ACTIVE_CRTC1w0          0xFFF
+
+#define ATOM_S3_CRT1_CRTC_ACTIVEb2      0x01
+#define ATOM_S3_LCD1_CRTC_ACTIVEb2      0x02
+#define ATOM_S3_TV1_CRTC_ACTIVEb2       0x04
+#define ATOM_S3_DFP1_CRTC_ACTIVEb2      0x08
+#define ATOM_S3_CRT2_CRTC_ACTIVEb2      0x10
+#define ATOM_S3_LCD2_CRTC_ACTIVEb2      0x20
+#define ATOM_S3_TV2_CRTC_ACTIVEb2       0x40
+#define ATOM_S3_DFP2_CRTC_ACTIVEb2      0x80
+#define ATOM_S3_CV_CRTC_ACTIVEb3        0x01
+#define ATOM_S3_DFP3_CRTC_ACTIVEb3			0x02
+#define ATOM_S3_DFP4_CRTC_ACTIVEb3			0x04
+#define ATOM_S3_DFP5_CRTC_ACTIVEb3			0x08
+
+#define ATOM_S3_ACTIVE_CRTC2w1          0xFFF
+
+#define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3	0x20
+#define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40
+#define ATOM_S3_RQST_GPU_USE_MIN_PWRb3  0x80
+
+/*  BIOS_4_SCRATCH Definition */
+#define ATOM_S4_LCD1_PANEL_ID_MASK      0x000000FFL
+#define ATOM_S4_LCD1_REFRESH_MASK       0x0000FF00L
+#define ATOM_S4_LCD1_REFRESH_SHIFT      8
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S4_LCD1_PANEL_ID_MASKb0	  0x0FF
+#define ATOM_S4_LCD1_REFRESH_MASKb1		  ATOM_S4_LCD1_PANEL_ID_MASKb0
+#define ATOM_S4_VRAM_INFO_MASKb2        ATOM_S4_LCD1_PANEL_ID_MASKb0
+
+/*  BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!! */
+#define ATOM_S5_DOS_REQ_CRT1b0          0x01
+#define ATOM_S5_DOS_REQ_LCD1b0          0x02
+#define ATOM_S5_DOS_REQ_TV1b0           0x04
+#define ATOM_S5_DOS_REQ_DFP1b0          0x08
+#define ATOM_S5_DOS_REQ_CRT2b0          0x10
+#define ATOM_S5_DOS_REQ_LCD2b0          0x20
+#define ATOM_S5_DOS_REQ_TV2b0           0x40
+#define ATOM_S5_DOS_REQ_DFP2b0          0x80
+#define ATOM_S5_DOS_REQ_CVb1            0x01
+#define ATOM_S5_DOS_REQ_DFP3b1					0x02
+#define ATOM_S5_DOS_REQ_DFP4b1					0x04
+#define ATOM_S5_DOS_REQ_DFP5b1					0x08
+
+#define ATOM_S5_DOS_REQ_DEVICEw0        0x03FF
+
+#define ATOM_S5_DOS_REQ_CRT1            0x0001
+#define ATOM_S5_DOS_REQ_LCD1            0x0002
+#define ATOM_S5_DOS_REQ_TV1             0x0004
+#define ATOM_S5_DOS_REQ_DFP1            0x0008
+#define ATOM_S5_DOS_REQ_CRT2            0x0010
+#define ATOM_S5_DOS_REQ_LCD2            0x0020
+#define ATOM_S5_DOS_REQ_TV2             0x0040
+#define ATOM_S5_DOS_REQ_DFP2            0x0080
+#define ATOM_S5_DOS_REQ_CV              0x0100
+#define ATOM_S5_DOS_REQ_DFP3						0x0200
+#define ATOM_S5_DOS_REQ_DFP4						0x0400
+#define ATOM_S5_DOS_REQ_DFP5						0x0800
+
+#define ATOM_S5_DOS_FORCE_CRT1b2        ATOM_S5_DOS_REQ_CRT1b0
+#define ATOM_S5_DOS_FORCE_TV1b2         ATOM_S5_DOS_REQ_TV1b0
+#define ATOM_S5_DOS_FORCE_CRT2b2        ATOM_S5_DOS_REQ_CRT2b0
+#define ATOM_S5_DOS_FORCE_CVb3          ATOM_S5_DOS_REQ_CVb1
+#define ATOM_S5_DOS_FORCE_DEVICEw1 \
+	(ATOM_S5_DOS_FORCE_CRT1b2 + ATOM_S5_DOS_FORCE_TV1b2 + \
+	 ATOM_S5_DOS_FORCE_CRT2b2 + (ATOM_S5_DOS_FORCE_CVb3 << 8))
+
+/*  BIOS_6_SCRATCH Definition */
+#define ATOM_S6_DEVICE_CHANGE           0x00000001L
+#define ATOM_S6_SCALER_CHANGE           0x00000002L
+#define ATOM_S6_LID_CHANGE              0x00000004L
+#define ATOM_S6_DOCKING_CHANGE          0x00000008L
+#define ATOM_S6_ACC_MODE                0x00000010L
+#define ATOM_S6_EXT_DESKTOP_MODE        0x00000020L
+#define ATOM_S6_LID_STATE               0x00000040L
+#define ATOM_S6_DOCK_STATE              0x00000080L
+#define ATOM_S6_CRITICAL_STATE          0x00000100L
+#define ATOM_S6_HW_I2C_BUSY_STATE       0x00000200L
+#define ATOM_S6_THERMAL_STATE_CHANGE    0x00000400L
+#define ATOM_S6_INTERRUPT_SET_BY_BIOS   0x00000800L
+#define ATOM_S6_REQ_LCD_EXPANSION_FULL         0x00001000L	/* Normal expansion Request bit for LCD */
+#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO  0x00002000L	/* Aspect ratio expansion Request bit for LCD */
+
+#define ATOM_S6_DISPLAY_STATE_CHANGE    0x00004000L	/* This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion */
+#define ATOM_S6_I2C_STATE_CHANGE        0x00008000L	/* This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion */
+
+#define ATOM_S6_ACC_REQ_CRT1            0x00010000L
+#define ATOM_S6_ACC_REQ_LCD1            0x00020000L
+#define ATOM_S6_ACC_REQ_TV1             0x00040000L
+#define ATOM_S6_ACC_REQ_DFP1            0x00080000L
+#define ATOM_S6_ACC_REQ_CRT2            0x00100000L
+#define ATOM_S6_ACC_REQ_LCD2            0x00200000L
+#define ATOM_S6_ACC_REQ_TV2             0x00400000L
+#define ATOM_S6_ACC_REQ_DFP2            0x00800000L
+#define ATOM_S6_ACC_REQ_CV              0x01000000L
+#define ATOM_S6_ACC_REQ_DFP3						0x02000000L
+#define ATOM_S6_ACC_REQ_DFP4						0x04000000L
+#define ATOM_S6_ACC_REQ_DFP5						0x08000000L
+
+#define ATOM_S6_ACC_REQ_MASK                0x0FFF0000L
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE    0x10000000L
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH    0x20000000L
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGE       0x40000000L
+#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK  0x80000000L
+
+/* Byte aligned defintion for BIOS usage */
+#define ATOM_S6_DEVICE_CHANGEb0         0x01
+#define ATOM_S6_SCALER_CHANGEb0         0x02
+#define ATOM_S6_LID_CHANGEb0            0x04
+#define ATOM_S6_DOCKING_CHANGEb0        0x08
+#define ATOM_S6_ACC_MODEb0              0x10
+#define ATOM_S6_EXT_DESKTOP_MODEb0      0x20
+#define ATOM_S6_LID_STATEb0             0x40
+#define ATOM_S6_DOCK_STATEb0            0x80
+#define ATOM_S6_CRITICAL_STATEb1        0x01
+#define ATOM_S6_HW_I2C_BUSY_STATEb1     0x02
+#define ATOM_S6_THERMAL_STATE_CHANGEb1  0x04
+#define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
+#define ATOM_S6_REQ_LCD_EXPANSION_FULLb1        0x10
+#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
+
+#define ATOM_S6_ACC_REQ_CRT1b2          0x01
+#define ATOM_S6_ACC_REQ_LCD1b2          0x02
+#define ATOM_S6_ACC_REQ_TV1b2           0x04
+#define ATOM_S6_ACC_REQ_DFP1b2          0x08
+#define ATOM_S6_ACC_REQ_CRT2b2          0x10
+#define ATOM_S6_ACC_REQ_LCD2b2          0x20
+#define ATOM_S6_ACC_REQ_TV2b2           0x40
+#define ATOM_S6_ACC_REQ_DFP2b2          0x80
+#define ATOM_S6_ACC_REQ_CVb3            0x01
+#define ATOM_S6_ACC_REQ_DFP3b3					0x02
+#define ATOM_S6_ACC_REQ_DFP4b3					0x04
+#define ATOM_S6_ACC_REQ_DFP5b3					0x08
+
+#define ATOM_S6_ACC_REQ_DEVICEw1        ATOM_S5_DOS_REQ_DEVICEw0
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3    0x40
+#define ATOM_S6_CONFIG_DISPLAY_CHANGEb3    0x80
+
+#define ATOM_S6_DEVICE_CHANGE_SHIFT             0
+#define ATOM_S6_SCALER_CHANGE_SHIFT             1
+#define ATOM_S6_LID_CHANGE_SHIFT                2
+#define ATOM_S6_DOCKING_CHANGE_SHIFT            3
+#define ATOM_S6_ACC_MODE_SHIFT                  4
+#define ATOM_S6_EXT_DESKTOP_MODE_SHIFT          5
+#define ATOM_S6_LID_STATE_SHIFT                 6
+#define ATOM_S6_DOCK_STATE_SHIFT                7
+#define ATOM_S6_CRITICAL_STATE_SHIFT            8
+#define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT         9
+#define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT      10
+#define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT     11
+#define ATOM_S6_REQ_SCALER_SHIFT                12
+#define ATOM_S6_REQ_SCALER_ARATIO_SHIFT         13
+#define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT      14
+#define ATOM_S6_I2C_STATE_CHANGE_SHIFT          15
+#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT  28
+#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT  29
+#define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT     30
+#define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT     31
+
+/*  BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!! */
+#define ATOM_S7_DOS_MODE_TYPEb0             0x03
+#define ATOM_S7_DOS_MODE_VGAb0              0x00
+#define ATOM_S7_DOS_MODE_VESAb0             0x01
+#define ATOM_S7_DOS_MODE_EXTb0              0x02
+#define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0      0x0C
+#define ATOM_S7_DOS_MODE_PIXEL_FORMATb0     0xF0
+#define ATOM_S7_DOS_8BIT_DAC_ENb1           0x01
+#define ATOM_S7_DOS_MODE_NUMBERw1           0x0FFFF
+
+#define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT       8
+
+/*  BIOS_8_SCRATCH Definition */
+#define ATOM_S8_I2C_CHANNEL_BUSY_MASK       0x00000FFFF
+#define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK     0x0FFFF0000
+
+#define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT      0
+#define ATOM_S8_I2C_ENGINE_BUSY_SHIFT       16
+
+/*  BIOS_9_SCRATCH Definition */
+#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
+#define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK  0x0000FFFF
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
+#define ATOM_S9_I2C_CHANNEL_ABORTED_MASK    0xFFFF0000
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
+#define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
+#endif
+#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
+#define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT   16
+#endif
+
+#define ATOM_FLAG_SET                         0x20
+#define ATOM_FLAG_CLEAR                       0
+#define CLEAR_ATOM_S6_ACC_MODE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
+#define SET_ATOM_S6_DEVICE_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_SCALER_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_LID_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)
+
+#define SET_ATOM_S6_LID_STATE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) |\
+	 ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_LID_STATE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_DOCK_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8)| \
+	 ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_DOCK_STATE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_DOCK_STATE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_THERMAL_STATE_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)
+
+#define SET_ATOM_S6_CRITICAL_STATE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_CRITICAL_STATE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)
+
+#define SET_ATOM_S6_REQ_SCALER \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S6_REQ_SCALER \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
+
+#define SET_ATOM_S6_REQ_SCALER_ARATIO \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
+#define CLEAR_ATOM_S6_REQ_SCALER_ARATIO \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
+
+#define SET_ATOM_S6_I2C_STATE_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
+
+#define SET_ATOM_S6_DISPLAY_STATE_CHANGE \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
+
+#define SET_ATOM_S6_DEVICE_RECONFIG \
+	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
+	 ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
+#define CLEAR_ATOM_S0_LCD1 \
+	((ATOM_DEVICE_CONNECT_INFO_DEF << 8 ) | \
+	 ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
+#define SET_ATOM_S7_DOS_8BIT_DAC_EN \
+	((ATOM_DOS_MODE_INFO_DEF << 8) | \
+	 ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
+#define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN \
+	((ATOM_DOS_MODE_INFO_DEF << 8) | \
+	 ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
+
+/****************************************************************************/
+/* Portion II: Definitinos only used in Driver */
+/****************************************************************************/
+
+/*  Macros used by driver */
+
+#define	GetIndexIntoMasterTable(MasterOrData, FieldName) (((char *)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES *)0)->FieldName)-(char *)0)/sizeof(USHORT))
+
+#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
+#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET)  ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
+
+#define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
+#define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
+
+/****************************************************************************/
+/* Portion III: Definitinos only used in VBIOS */
+/****************************************************************************/
+#define ATOM_DAC_SRC					0x80
+#define ATOM_SRC_DAC1					0
+#define ATOM_SRC_DAC2					0x80
+
+#ifdef	UEFI_BUILD
+#define	USHORT	UTEMP
+#endif
+
+typedef struct _MEMORY_PLLINIT_PARAMETERS {
+	ULONG ulTargetMemoryClock;	/* In 10Khz unit */
+	UCHAR ucAction;		/* not define yet */
+	UCHAR ucFbDiv_Hi;	/* Fbdiv Hi byte */
+	UCHAR ucFbDiv;		/* FB value */
+	UCHAR ucPostDiv;	/* Post div */
+} MEMORY_PLLINIT_PARAMETERS;
+
+#define MEMORY_PLLINIT_PS_ALLOCATION  MEMORY_PLLINIT_PARAMETERS
+
+#define	GPIO_PIN_WRITE													0x01
+#define	GPIO_PIN_READ														0x00
+
+typedef struct _GPIO_PIN_CONTROL_PARAMETERS {
+	UCHAR ucGPIO_ID;	/* return value, read from GPIO pins */
+	UCHAR ucGPIOBitShift;	/* define which bit in uGPIOBitVal need to be update */
+	UCHAR ucGPIOBitVal;	/* Set/Reset corresponding bit defined in ucGPIOBitMask */
+	UCHAR ucAction;		/* =GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write */
+} GPIO_PIN_CONTROL_PARAMETERS;
+
+typedef struct _ENABLE_SCALER_PARAMETERS {
+	UCHAR ucScaler;		/*  ATOM_SCALER1, ATOM_SCALER2 */
+	UCHAR ucEnable;		/*  ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION */
+	UCHAR ucTVStandard;	/*  */
+	UCHAR ucPadding[1];
+} ENABLE_SCALER_PARAMETERS;
+#define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
+
+/* ucEnable: */
+#define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION    0
+#define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION  1
+#define SCALER_ENABLE_2TAP_ALPHA_MODE               2
+#define SCALER_ENABLE_MULTITAP_MODE                 3
+
+typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS {
+	ULONG usHWIconHorzVertPosn;	/*  Hardware Icon Vertical position */
+	UCHAR ucHWIconVertOffset;	/*  Hardware Icon Vertical offset */
+	UCHAR ucHWIconHorzOffset;	/*  Hardware Icon Horizontal offset */
+	UCHAR ucSelection;	/*  ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2 */
+	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
+} ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS;
+
+typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION {
+	ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon;
+	ENABLE_CRTC_PARAMETERS sReserved;
+} ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS {
+	USHORT usHight;		/*  Image Hight */
+	USHORT usWidth;		/*  Image Width */
+	UCHAR ucSurface;	/*  Surface 1 or 2 */
+	UCHAR ucPadding[3];
+} ENABLE_GRAPH_SURFACE_PARAMETERS;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 {
+	USHORT usHight;		/*  Image Hight */
+	USHORT usWidth;		/*  Image Width */
+	UCHAR ucSurface;	/*  Surface 1 or 2 */
+	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
+	UCHAR ucPadding[2];
+} ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2;
+
+typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION {
+	ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
+	ENABLE_YUV_PS_ALLOCATION sReserved;	/*  Don't set this one */
+} ENABLE_GRAPH_SURFACE_PS_ALLOCATION;
+
+typedef struct _MEMORY_CLEAN_UP_PARAMETERS {
+	USHORT usMemoryStart;	/* in 8Kb boundry, offset from memory base address */
+	USHORT usMemorySize;	/* 8Kb blocks aligned */
+} MEMORY_CLEAN_UP_PARAMETERS;
+#define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
+
+typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS {
+	USHORT usX_Size;	/* When use as input parameter, usX_Size indicates which CRTC */
+	USHORT usY_Size;
+} GET_DISPLAY_SURFACE_SIZE_PARAMETERS;
+
+typedef struct _INDIRECT_IO_ACCESS {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR IOAccessSequence[256];
+} INDIRECT_IO_ACCESS;
+
+#define INDIRECT_READ              0x00
+#define INDIRECT_WRITE             0x80
+
+#define INDIRECT_IO_MM             0
+#define INDIRECT_IO_PLL            1
+#define INDIRECT_IO_MC             2
+#define INDIRECT_IO_PCIE           3
+#define INDIRECT_IO_PCIEP          4
+#define INDIRECT_IO_NBMISC         5
+
+#define INDIRECT_IO_PLL_READ       INDIRECT_IO_PLL   | INDIRECT_READ
+#define INDIRECT_IO_PLL_WRITE      INDIRECT_IO_PLL   | INDIRECT_WRITE
+#define INDIRECT_IO_MC_READ        INDIRECT_IO_MC    | INDIRECT_READ
+#define INDIRECT_IO_MC_WRITE       INDIRECT_IO_MC    | INDIRECT_WRITE
+#define INDIRECT_IO_PCIE_READ      INDIRECT_IO_PCIE  | INDIRECT_READ
+#define INDIRECT_IO_PCIE_WRITE     INDIRECT_IO_PCIE  | INDIRECT_WRITE
+#define INDIRECT_IO_PCIEP_READ     INDIRECT_IO_PCIEP | INDIRECT_READ
+#define INDIRECT_IO_PCIEP_WRITE    INDIRECT_IO_PCIEP | INDIRECT_WRITE
+#define INDIRECT_IO_NBMISC_READ    INDIRECT_IO_NBMISC | INDIRECT_READ
+#define INDIRECT_IO_NBMISC_WRITE   INDIRECT_IO_NBMISC | INDIRECT_WRITE
+
+typedef struct _ATOM_OEM_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+} ATOM_OEM_INFO;
+
+typedef struct _ATOM_TV_MODE {
+	UCHAR ucVMode_Num;	/* Video mode number */
+	UCHAR ucTV_Mode_Num;	/* Internal TV mode number */
+} ATOM_TV_MODE;
+
+typedef struct _ATOM_BIOS_INT_TVSTD_MODE {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usTV_Mode_LUT_Offset;	/*  Pointer to standard to internal number conversion table */
+	USHORT usTV_FIFO_Offset;	/*  Pointer to FIFO entry table */
+	USHORT usNTSC_Tbl_Offset;	/*  Pointer to SDTV_Mode_NTSC table */
+	USHORT usPAL_Tbl_Offset;	/*  Pointer to SDTV_Mode_PAL table */
+	USHORT usCV_Tbl_Offset;	/*  Pointer to SDTV_Mode_PAL table */
+} ATOM_BIOS_INT_TVSTD_MODE;
+
+typedef struct _ATOM_TV_MODE_SCALER_PTR {
+	USHORT ucFilter0_Offset;	/* Pointer to filter format 0 coefficients */
+	USHORT usFilter1_Offset;	/* Pointer to filter format 0 coefficients */
+	UCHAR ucTV_Mode_Num;
+} ATOM_TV_MODE_SCALER_PTR;
+
+typedef struct _ATOM_STANDARD_VESA_TIMING {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_DTD_FORMAT aModeTimings[16];	/*  16 is not the real array number, just for initial allocation */
+} ATOM_STANDARD_VESA_TIMING;
+
+typedef struct _ATOM_STD_FORMAT {
+	USHORT usSTD_HDisp;
+	USHORT usSTD_VDisp;
+	USHORT usSTD_RefreshRate;
+	USHORT usReserved;
+} ATOM_STD_FORMAT;
+
+typedef struct _ATOM_VESA_TO_EXTENDED_MODE {
+	USHORT usVESA_ModeNumber;
+	USHORT usExtendedModeNumber;
+} ATOM_VESA_TO_EXTENDED_MODE;
+
+typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76];
+} ATOM_VESA_TO_INTENAL_MODE_LUT;
+
+/*************** ATOM Memory Related Data Structure ***********************/
+typedef struct _ATOM_MEMORY_VENDOR_BLOCK {
+	UCHAR ucMemoryType;
+	UCHAR ucMemoryVendor;
+	UCHAR ucAdjMCId;
+	UCHAR ucDynClkId;
+	ULONG ulDllResetClkRange;
+} ATOM_MEMORY_VENDOR_BLOCK;
+
+typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG {
+#if ATOM_BIG_ENDIAN
+	ULONG ucMemBlkId:8;
+	ULONG ulMemClockRange:24;
+#else
+	ULONG ulMemClockRange:24;
+	ULONG ucMemBlkId:8;
+#endif
+} ATOM_MEMORY_SETTING_ID_CONFIG;
+
+typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS {
+	ATOM_MEMORY_SETTING_ID_CONFIG slAccess;
+	ULONG ulAccess;
+} ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS;
+
+typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK {
+	ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID;
+	ULONG aulMemData[1];
+} ATOM_MEMORY_SETTING_DATA_BLOCK;
+
+typedef struct _ATOM_INIT_REG_INDEX_FORMAT {
+	USHORT usRegIndex;	/*  MC register index */
+	UCHAR ucPreRegDataLength;	/*  offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf */
+} ATOM_INIT_REG_INDEX_FORMAT;
+
+typedef struct _ATOM_INIT_REG_BLOCK {
+	USHORT usRegIndexTblSize;	/* size of asRegIndexBuf */
+	USHORT usRegDataBlkSize;	/* size of ATOM_MEMORY_SETTING_DATA_BLOCK */
+	ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1];
+	ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1];
+} ATOM_INIT_REG_BLOCK;
+
+#define END_OF_REG_INDEX_BLOCK  0x0ffff
+#define END_OF_REG_DATA_BLOCK   0x00000000
+#define ATOM_INIT_REG_MASK_FLAG 0x80
+#define	CLOCK_RANGE_HIGHEST			0x00ffffff
+
+#define VALUE_DWORD             SIZEOF ULONG
+#define VALUE_SAME_AS_ABOVE     0
+#define VALUE_MASK_DWORD        0x84
+
+#define INDEX_ACCESS_RANGE_BEGIN	    (VALUE_DWORD + 1)
+#define INDEX_ACCESS_RANGE_END		    (INDEX_ACCESS_RANGE_BEGIN + 1)
+#define VALUE_INDEX_ACCESS_SINGLE	    (INDEX_ACCESS_RANGE_END + 1)
+
+typedef struct _ATOM_MC_INIT_PARAM_TABLE {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usAdjustARB_SEQDataOffset;
+	USHORT usMCInitMemTypeTblOffset;
+	USHORT usMCInitCommonTblOffset;
+	USHORT usMCInitPowerDownTblOffset;
+	ULONG ulARB_SEQDataBuf[32];
+	ATOM_INIT_REG_BLOCK asMCInitMemType;
+	ATOM_INIT_REG_BLOCK asMCInitCommon;
+} ATOM_MC_INIT_PARAM_TABLE;
+
+#define _4Mx16              0x2
+#define _4Mx32              0x3
+#define _8Mx16              0x12
+#define _8Mx32              0x13
+#define _16Mx16             0x22
+#define _16Mx32             0x23
+#define _32Mx16             0x32
+#define _32Mx32             0x33
+#define _64Mx8              0x41
+#define _64Mx16             0x42
+
+#define SAMSUNG             0x1
+#define INFINEON            0x2
+#define ELPIDA              0x3
+#define ETRON               0x4
+#define NANYA               0x5
+#define HYNIX               0x6
+#define MOSEL               0x7
+#define WINBOND             0x8
+#define ESMT                0x9
+#define MICRON              0xF
+
+#define QIMONDA             INFINEON
+#define PROMOS              MOSEL
+
+/* ///////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// */
+
+#define UCODE_ROM_START_ADDRESS		0x1c000
+#define	UCODE_SIGNATURE			0x4375434d	/*  'MCuC' - MC uCode */
+
+/* uCode block header for reference */
+
+typedef struct _MCuCodeHeader {
+	ULONG ulSignature;
+	UCHAR ucRevision;
+	UCHAR ucChecksum;
+	UCHAR ucReserved1;
+	UCHAR ucReserved2;
+	USHORT usParametersLength;
+	USHORT usUCodeLength;
+	USHORT usReserved1;
+	USHORT usReserved2;
+} MCuCodeHeader;
+
+/* //////////////////////////////////////////////////////////////////////////////// */
+
+#define ATOM_MAX_NUMBER_OF_VRAM_MODULE	16
+
+#define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK	0xF
+typedef struct _ATOM_VRAM_MODULE_V1 {
+	ULONG ulReserved;
+	USHORT usEMRSValue;
+	USHORT usMRSValue;
+	USHORT usReserved;
+	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved; */
+	UCHAR ucMemoryVenderID;	/*  Predefined,never change across designs or memory type/vender */
+	UCHAR ucMemoryDeviceCfg;	/*  [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */
+	UCHAR ucRow;		/*  Number of Row,in power of 2; */
+	UCHAR ucColumn;		/*  Number of Column,in power of 2; */
+	UCHAR ucBank;		/*  Nunber of Bank; */
+	UCHAR ucRank;		/*  Number of Rank, in power of 2 */
+	UCHAR ucChannelNum;	/*  Number of channel; */
+	UCHAR ucChannelConfig;	/*  [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */
+	UCHAR ucDefaultMVDDQ_ID;	/*  Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */
+	UCHAR ucDefaultMVDDC_ID;	/*  Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */
+	UCHAR ucReserved[2];
+} ATOM_VRAM_MODULE_V1;
+
+typedef struct _ATOM_VRAM_MODULE_V2 {
+	ULONG ulReserved;
+	ULONG ulFlags;		/*  To enable/disable functionalities based on memory type */
+	ULONG ulEngineClock;	/*  Override of default engine clock for particular memory type */
+	ULONG ulMemoryClock;	/*  Override of default memory clock for particular memory type */
+	USHORT usEMRS2Value;	/*  EMRS2 Value is used for GDDR2 and GDDR4 memory type */
+	USHORT usEMRS3Value;	/*  EMRS3 Value is used for GDDR2 and GDDR4 memory type */
+	USHORT usEMRSValue;
+	USHORT usMRSValue;
+	USHORT usReserved;
+	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */
+	UCHAR ucMemoryVenderID;	/*  Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */
+	UCHAR ucMemoryDeviceCfg;	/*  [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */
+	UCHAR ucRow;		/*  Number of Row,in power of 2; */
+	UCHAR ucColumn;		/*  Number of Column,in power of 2; */
+	UCHAR ucBank;		/*  Nunber of Bank; */
+	UCHAR ucRank;		/*  Number of Rank, in power of 2 */
+	UCHAR ucChannelNum;	/*  Number of channel; */
+	UCHAR ucChannelConfig;	/*  [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */
+	UCHAR ucDefaultMVDDQ_ID;	/*  Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */
+	UCHAR ucDefaultMVDDC_ID;	/*  Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */
+	UCHAR ucRefreshRateFactor;
+	UCHAR ucReserved[3];
+} ATOM_VRAM_MODULE_V2;
+
+typedef struct _ATOM_MEMORY_TIMING_FORMAT {
+	ULONG ulClkRange;	/*  memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */
+	union {
+		USHORT usMRS;	/*  mode register */
+		USHORT usDDR3_MR0;
+	};
+	union {
+		USHORT usEMRS;	/*  extended mode register */
+		USHORT usDDR3_MR1;
+	};
+	UCHAR ucCL;		/*  CAS latency */
+	UCHAR ucWL;		/*  WRITE Latency */
+	UCHAR uctRAS;		/*  tRAS */
+	UCHAR uctRC;		/*  tRC */
+	UCHAR uctRFC;		/*  tRFC */
+	UCHAR uctRCDR;		/*  tRCDR */
+	UCHAR uctRCDW;		/*  tRCDW */
+	UCHAR uctRP;		/*  tRP */
+	UCHAR uctRRD;		/*  tRRD */
+	UCHAR uctWR;		/*  tWR */
+	UCHAR uctWTR;		/*  tWTR */
+	UCHAR uctPDIX;		/*  tPDIX */
+	UCHAR uctFAW;		/*  tFAW */
+	UCHAR uctAOND;		/*  tAOND */
+	union {
+		struct {
+			UCHAR ucflag;	/*  flag to control memory timing calculation. bit0= control EMRS2 Infineon */
+			UCHAR ucReserved;
+		};
+		USHORT usDDR3_MR2;
+	};
+} ATOM_MEMORY_TIMING_FORMAT;
+
+typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1 {
+	ULONG ulClkRange;	/*  memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */
+	USHORT usMRS;		/*  mode register */
+	USHORT usEMRS;		/*  extended mode register */
+	UCHAR ucCL;		/*  CAS latency */
+	UCHAR ucWL;		/*  WRITE Latency */
+	UCHAR uctRAS;		/*  tRAS */
+	UCHAR uctRC;		/*  tRC */
+	UCHAR uctRFC;		/*  tRFC */
+	UCHAR uctRCDR;		/*  tRCDR */
+	UCHAR uctRCDW;		/*  tRCDW */
+	UCHAR uctRP;		/*  tRP */
+	UCHAR uctRRD;		/*  tRRD */
+	UCHAR uctWR;		/*  tWR */
+	UCHAR uctWTR;		/*  tWTR */
+	UCHAR uctPDIX;		/*  tPDIX */
+	UCHAR uctFAW;		/*  tFAW */
+	UCHAR uctAOND;		/*  tAOND */
+	UCHAR ucflag;		/*  flag to control memory timing calculation. bit0= control EMRS2 Infineon */
+/* ///////////////////////GDDR parameters/////////////////////////////////// */
+	UCHAR uctCCDL;		/*  */
+	UCHAR uctCRCRL;		/*  */
+	UCHAR uctCRCWL;		/*  */
+	UCHAR uctCKE;		/*  */
+	UCHAR uctCKRSE;		/*  */
+	UCHAR uctCKRSX;		/*  */
+	UCHAR uctFAW32;		/*  */
+	UCHAR ucReserved1;	/*  */
+	UCHAR ucReserved2;	/*  */
+	UCHAR ucTerminator;
+} ATOM_MEMORY_TIMING_FORMAT_V1;
+
+typedef struct _ATOM_MEMORY_FORMAT {
+	ULONG ulDllDisClock;	/*  memory DLL will be disable when target memory clock is below this clock */
+	union {
+		USHORT usEMRS2Value;	/*  EMRS2 Value is used for GDDR2 and GDDR4 memory type */
+		USHORT usDDR3_Reserved;	/*  Not used for DDR3 memory */
+	};
+	union {
+		USHORT usEMRS3Value;	/*  EMRS3 Value is used for GDDR2 and GDDR4 memory type */
+		USHORT usDDR3_MR3;	/*  Used for DDR3 memory */
+	};
+	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */
+	UCHAR ucMemoryVenderID;	/*  Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */
+	UCHAR ucRow;		/*  Number of Row,in power of 2; */
+	UCHAR ucColumn;		/*  Number of Column,in power of 2; */
+	UCHAR ucBank;		/*  Nunber of Bank; */
+	UCHAR ucRank;		/*  Number of Rank, in power of 2 */
+	UCHAR ucBurstSize;	/*  burst size, 0= burst size=4  1= burst size=8 */
+	UCHAR ucDllDisBit;	/*  position of DLL Enable/Disable bit in EMRS ( Extended Mode Register ) */
+	UCHAR ucRefreshRateFactor;	/*  memory refresh rate in unit of ms */
+	UCHAR ucDensity;	/*  _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
+	UCHAR ucPreamble;	/* [7:4] Write Preamble, [3:0] Read Preamble */
+	UCHAR ucMemAttrib;	/*  Memory Device Addribute, like RDBI/WDBI etc */
+	ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];	/* Memory Timing block sort from lower clock to higher clock */
+} ATOM_MEMORY_FORMAT;
+
+typedef struct _ATOM_VRAM_MODULE_V3 {
+	ULONG ulChannelMapCfg;	/*  board dependent paramenter:Channel combination */
+	USHORT usSize;		/*  size of ATOM_VRAM_MODULE_V3 */
+	USHORT usDefaultMVDDQ;	/*  board dependent parameter:Default Memory Core Voltage */
+	USHORT usDefaultMVDDC;	/*  board dependent parameter:Default Memory IO Voltage */
+	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+	UCHAR ucChannelNum;	/*  board dependent parameter:Number of channel; */
+	UCHAR ucChannelSize;	/*  board dependent parameter:32bit or 64bit */
+	UCHAR ucVREFI;		/*  board dependnt parameter: EXT or INT +160mv to -140mv */
+	UCHAR ucNPL_RT;		/*  board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
+	UCHAR ucFlag;		/*  To enable/disable functionalities based on memory type */
+	ATOM_MEMORY_FORMAT asMemory;	/*  describ all of video memory parameters from memory spec */
+} ATOM_VRAM_MODULE_V3;
+
+/* ATOM_VRAM_MODULE_V3.ucNPL_RT */
+#define NPL_RT_MASK															0x0f
+#define BATTERY_ODT_MASK												0xc0
+
+#define ATOM_VRAM_MODULE		 ATOM_VRAM_MODULE_V3
+
+typedef struct _ATOM_VRAM_MODULE_V4 {
+	ULONG ulChannelMapCfg;	/*  board dependent parameter: Channel combination */
+	USHORT usModuleSize;	/*  size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */
+	USHORT usPrivateReserved;	/*  BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
+	/*  MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */
+	USHORT usReserved;
+	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */
+	UCHAR ucChannelNum;	/*  Number of channels present in this module config */
+	UCHAR ucChannelWidth;	/*  0 - 32 bits; 1 - 64 bits */
+	UCHAR ucDensity;	/*  _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
+	UCHAR ucFlag;		/*  To enable/disable functionalities based on memory type */
+	UCHAR ucMisc;		/*  bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8 */
+	UCHAR ucVREFI;		/*  board dependent parameter */
+	UCHAR ucNPL_RT;		/*  board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
+	UCHAR ucPreamble;	/*  [7:4] Write Preamble, [3:0] Read Preamble */
+	UCHAR ucMemorySize;	/*  BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
+	/*  Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */
+	UCHAR ucReserved[3];
+
+/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */
+	union {
+		USHORT usEMRS2Value;	/*  EMRS2 Value is used for GDDR2 and GDDR4 memory type */
+		USHORT usDDR3_Reserved;
+	};
+	union {
+		USHORT usEMRS3Value;	/*  EMRS3 Value is used for GDDR2 and GDDR4 memory type */
+		USHORT usDDR3_MR3;	/*  Used for DDR3 memory */
+	};
+	UCHAR ucMemoryVenderID;	/*  Predefined, If not predefined, vendor detection table gets executed */
+	UCHAR ucRefreshRateFactor;	/*  [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */
+	UCHAR ucReserved2[2];
+	ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];	/* Memory Timing block sort from lower clock to higher clock */
+} ATOM_VRAM_MODULE_V4;
+
+#define VRAM_MODULE_V4_MISC_RANK_MASK       0x3
+#define VRAM_MODULE_V4_MISC_DUAL_RANK       0x1
+#define VRAM_MODULE_V4_MISC_BL_MASK         0x4
+#define VRAM_MODULE_V4_MISC_BL8             0x4
+#define VRAM_MODULE_V4_MISC_DUAL_CS         0x10
+
+typedef struct _ATOM_VRAM_MODULE_V5 {
+	ULONG ulChannelMapCfg;	/*  board dependent parameter: Channel combination */
+	USHORT usModuleSize;	/*  size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */
+	USHORT usPrivateReserved;	/*  BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
+	/*  MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */
+	USHORT usReserved;
+	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
+	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */
+	UCHAR ucChannelNum;	/*  Number of channels present in this module config */
+	UCHAR ucChannelWidth;	/*  0 - 32 bits; 1 - 64 bits */
+	UCHAR ucDensity;	/*  _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
+	UCHAR ucFlag;		/*  To enable/disable functionalities based on memory type */
+	UCHAR ucMisc;		/*  bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8 */
+	UCHAR ucVREFI;		/*  board dependent parameter */
+	UCHAR ucNPL_RT;		/*  board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
+	UCHAR ucPreamble;	/*  [7:4] Write Preamble, [3:0] Read Preamble */
+	UCHAR ucMemorySize;	/*  BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
+	/*  Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */
+	UCHAR ucReserved[3];
+
+/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */
+	USHORT usEMRS2Value;	/*  EMRS2 Value is used for GDDR2 and GDDR4 memory type */
+	USHORT usEMRS3Value;	/*  EMRS3 Value is used for GDDR2 and GDDR4 memory type */
+	UCHAR ucMemoryVenderID;	/*  Predefined, If not predefined, vendor detection table gets executed */
+	UCHAR ucRefreshRateFactor;	/*  [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */
+	UCHAR ucFIFODepth;	/*  FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth */
+	UCHAR ucCDR_Bandwidth;	/*  [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth */
+	ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5];	/* Memory Timing block sort from lower clock to higher clock */
+} ATOM_VRAM_MODULE_V5;
+
+typedef struct _ATOM_VRAM_INFO_V2 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR ucNumOfVRAMModule;
+	ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];	/*  just for allocation, real number of blocks is in ucNumOfVRAMModule; */
+} ATOM_VRAM_INFO_V2;
+
+typedef struct _ATOM_VRAM_INFO_V3 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usMemAdjustTblOffset;	/*  offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */
+	USHORT usMemClkPatchTblOffset;	/*      offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */
+	USHORT usRerseved;
+	UCHAR aVID_PinsShift[9];	/*  8 bit strap maximum+terminator */
+	UCHAR ucNumOfVRAMModule;
+	ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];	/*  just for allocation, real number of blocks is in ucNumOfVRAMModule; */
+	ATOM_INIT_REG_BLOCK asMemPatch;	/*  for allocation */
+	/*      ATOM_INIT_REG_BLOCK                              aMemAdjust; */
+} ATOM_VRAM_INFO_V3;
+
+#define	ATOM_VRAM_INFO_LAST	     ATOM_VRAM_INFO_V3
+
+typedef struct _ATOM_VRAM_INFO_V4 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usMemAdjustTblOffset;	/*  offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */
+	USHORT usMemClkPatchTblOffset;	/*      offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */
+	USHORT usRerseved;
+	UCHAR ucMemDQ7_0ByteRemap;	/*  DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 */
+	ULONG ulMemDQ7_0BitRemap;	/*  each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] */
+	UCHAR ucReservde[4];
+	UCHAR ucNumOfVRAMModule;
+	ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];	/*  just for allocation, real number of blocks is in ucNumOfVRAMModule; */
+	ATOM_INIT_REG_BLOCK asMemPatch;	/*  for allocation */
+	/*      ATOM_INIT_REG_BLOCK                              aMemAdjust; */
+} ATOM_VRAM_INFO_V4;
+
+typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR aVID_PinsShift[9];	/* 8 bit strap maximum+terminator */
+} ATOM_VRAM_GPIO_DETECTION_INFO;
+
+typedef struct _ATOM_MEMORY_TRAINING_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR ucTrainingLoop;
+	UCHAR ucReserved[3];
+	ATOM_INIT_REG_BLOCK asMemTrainingSetting;
+} ATOM_MEMORY_TRAINING_INFO;
+
+typedef struct SW_I2C_CNTL_DATA_PARAMETERS {
+	UCHAR ucControl;
+	UCHAR ucData;
+	UCHAR ucSatus;
+	UCHAR ucTemp;
+} SW_I2C_CNTL_DATA_PARAMETERS;
+
+#define SW_I2C_CNTL_DATA_PS_ALLOCATION  SW_I2C_CNTL_DATA_PARAMETERS
+
+typedef struct _SW_I2C_IO_DATA_PARAMETERS {
+	USHORT GPIO_Info;
+	UCHAR ucAct;
+	UCHAR ucData;
+} SW_I2C_IO_DATA_PARAMETERS;
+
+#define SW_I2C_IO_DATA_PS_ALLOCATION  SW_I2C_IO_DATA_PARAMETERS
+
+/****************************SW I2C CNTL DEFINITIONS**********************/
+#define SW_I2C_IO_RESET       0
+#define SW_I2C_IO_GET         1
+#define SW_I2C_IO_DRIVE       2
+#define SW_I2C_IO_SET         3
+#define SW_I2C_IO_START       4
+
+#define SW_I2C_IO_CLOCK       0
+#define SW_I2C_IO_DATA        0x80
+
+#define SW_I2C_IO_ZERO        0
+#define SW_I2C_IO_ONE         0x100
+
+#define SW_I2C_CNTL_READ      0
+#define SW_I2C_CNTL_WRITE     1
+#define SW_I2C_CNTL_START     2
+#define SW_I2C_CNTL_STOP      3
+#define SW_I2C_CNTL_OPEN      4
+#define SW_I2C_CNTL_CLOSE     5
+#define SW_I2C_CNTL_WRITE1BIT 6
+
+/* ==============================VESA definition Portion=============================== */
+#define VESA_OEM_PRODUCT_REV			            '01.00'
+#define VESA_MODE_ATTRIBUTE_MODE_SUPPORT	     0xBB	/* refer to VBE spec p.32, no TTY support */
+#define VESA_MODE_WIN_ATTRIBUTE						     7
+#define VESA_WIN_SIZE											     64
+
+typedef struct _PTR_32_BIT_STRUCTURE {
+	USHORT Offset16;
+	USHORT Segment16;
+} PTR_32_BIT_STRUCTURE;
+
+typedef union _PTR_32_BIT_UNION {
+	PTR_32_BIT_STRUCTURE SegmentOffset;
+	ULONG Ptr32_Bit;
+} PTR_32_BIT_UNION;
+
+typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE {
+	UCHAR VbeSignature[4];
+	USHORT VbeVersion;
+	PTR_32_BIT_UNION OemStringPtr;
+	UCHAR Capabilities[4];
+	PTR_32_BIT_UNION VideoModePtr;
+	USHORT TotalMemory;
+} VBE_1_2_INFO_BLOCK_UPDATABLE;
+
+typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE {
+	VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock;
+	USHORT OemSoftRev;
+	PTR_32_BIT_UNION OemVendorNamePtr;
+	PTR_32_BIT_UNION OemProductNamePtr;
+	PTR_32_BIT_UNION OemProductRevPtr;
+} VBE_2_0_INFO_BLOCK_UPDATABLE;
+
+typedef union _VBE_VERSION_UNION {
+	VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock;
+	VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock;
+} VBE_VERSION_UNION;
+
+typedef struct _VBE_INFO_BLOCK {
+	VBE_VERSION_UNION UpdatableVBE_Info;
+	UCHAR Reserved[222];
+	UCHAR OemData[256];
+} VBE_INFO_BLOCK;
+
+typedef struct _VBE_FP_INFO {
+	USHORT HSize;
+	USHORT VSize;
+	USHORT FPType;
+	UCHAR RedBPP;
+	UCHAR GreenBPP;
+	UCHAR BlueBPP;
+	UCHAR ReservedBPP;
+	ULONG RsvdOffScrnMemSize;
+	ULONG RsvdOffScrnMEmPtr;
+	UCHAR Reserved[14];
+} VBE_FP_INFO;
+
+typedef struct _VESA_MODE_INFO_BLOCK {
+/*  Mandatory information for all VBE revisions */
+	USHORT ModeAttributes;	/*                  dw      ?       ; mode attributes */
+	UCHAR WinAAttributes;	/*                    db      ?       ; window A attributes */
+	UCHAR WinBAttributes;	/*                    db      ?       ; window B attributes */
+	USHORT WinGranularity;	/*                    dw      ?       ; window granularity */
+	USHORT WinSize;		/*                    dw      ?       ; window size */
+	USHORT WinASegment;	/*                    dw      ?       ; window A start segment */
+	USHORT WinBSegment;	/*                    dw      ?       ; window B start segment */
+	ULONG WinFuncPtr;	/*                    dd      ?       ; real mode pointer to window function */
+	USHORT BytesPerScanLine;	/*                    dw      ?       ; bytes per scan line */
+
+/* ; Mandatory information for VBE 1.2 and above */
+	USHORT XResolution;	/*                         dw      ?       ; horizontal resolution in pixels or characters */
+	USHORT YResolution;	/*                   dw      ?       ; vertical resolution in pixels or characters */
+	UCHAR XCharSize;	/*                   db      ?       ; character cell width in pixels */
+	UCHAR YCharSize;	/*                   db      ?       ; character cell height in pixels */
+	UCHAR NumberOfPlanes;	/*                   db      ?       ; number of memory planes */
+	UCHAR BitsPerPixel;	/*                   db      ?       ; bits per pixel */
+	UCHAR NumberOfBanks;	/*                   db      ?       ; number of banks */
+	UCHAR MemoryModel;	/*                   db      ?       ; memory model type */
+	UCHAR BankSize;		/*                   db      ?       ; bank size in KB */
+	UCHAR NumberOfImagePages;	/*            db    ?       ; number of images */
+	UCHAR ReservedForPageFunction;	/* db  1       ; reserved for page function */
+
+/* ; Direct Color fields(required for direct/6 and YUV/7 memory models) */
+	UCHAR RedMaskSize;	/*           db      ?       ; size of direct color red mask in bits */
+	UCHAR RedFieldPosition;	/*           db      ?       ; bit position of lsb of red mask */
+	UCHAR GreenMaskSize;	/*           db      ?       ; size of direct color green mask in bits */
+	UCHAR GreenFieldPosition;	/*           db      ?       ; bit position of lsb of green mask */
+	UCHAR BlueMaskSize;	/*           db      ?       ; size of direct color blue mask in bits */
+	UCHAR BlueFieldPosition;	/*           db      ?       ; bit position of lsb of blue mask */
+	UCHAR RsvdMaskSize;	/*           db      ?       ; size of direct color reserved mask in bits */
+	UCHAR RsvdFieldPosition;	/*           db      ?       ; bit position of lsb of reserved mask */
+	UCHAR DirectColorModeInfo;	/*           db      ?       ; direct color mode attributes */
+
+/* ; Mandatory information for VBE 2.0 and above */
+	ULONG PhysBasePtr;	/*           dd      ?       ; physical address for flat memory frame buffer */
+	ULONG Reserved_1;	/*           dd      0       ; reserved - always set to 0 */
+	USHORT Reserved_2;	/*     dw    0       ; reserved - always set to 0 */
+
+/* ; Mandatory information for VBE 3.0 and above */
+	USHORT LinBytesPerScanLine;	/*         dw      ?       ; bytes per scan line for linear modes */
+	UCHAR BnkNumberOfImagePages;	/*         db      ?       ; number of images for banked modes */
+	UCHAR LinNumberOfImagPages;	/*         db      ?       ; number of images for linear modes */
+	UCHAR LinRedMaskSize;	/*         db      ?       ; size of direct color red mask(linear modes) */
+	UCHAR LinRedFieldPosition;	/*         db      ?       ; bit position of lsb of red mask(linear modes) */
+	UCHAR LinGreenMaskSize;	/*         db      ?       ; size of direct color green mask(linear modes) */
+	UCHAR LinGreenFieldPosition;	/*         db      ?       ; bit position of lsb of green mask(linear modes) */
+	UCHAR LinBlueMaskSize;	/*         db      ?       ; size of direct color blue mask(linear modes) */
+	UCHAR LinBlueFieldPosition;	/*         db      ?       ; bit position of lsb of blue mask(linear modes) */
+	UCHAR LinRsvdMaskSize;	/*         db      ?       ; size of direct color reserved mask(linear modes) */
+	UCHAR LinRsvdFieldPosition;	/*         db      ?       ; bit position of lsb of reserved mask(linear modes) */
+	ULONG MaxPixelClock;	/*         dd      ?       ; maximum pixel clock(in Hz) for graphics mode */
+	UCHAR Reserved;		/*         db      190 dup (0) */
+} VESA_MODE_INFO_BLOCK;
+
+/*  BIOS function CALLS */
+#define ATOM_BIOS_EXTENDED_FUNCTION_CODE        0xA0	/*  ATI Extended Function code */
+#define ATOM_BIOS_FUNCTION_COP_MODE             0x00
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY1         0x04
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY2         0x05
+#define ATOM_BIOS_FUNCTION_SHORT_QUERY3         0x06
+#define ATOM_BIOS_FUNCTION_GET_DDC              0x0B
+#define ATOM_BIOS_FUNCTION_ASIC_DSTATE          0x0E
+#define ATOM_BIOS_FUNCTION_DEBUG_PLAY           0x0F
+#define ATOM_BIOS_FUNCTION_STV_STD              0x16
+#define ATOM_BIOS_FUNCTION_DEVICE_DET           0x17
+#define ATOM_BIOS_FUNCTION_DEVICE_SWITCH        0x18
+
+#define ATOM_BIOS_FUNCTION_PANEL_CONTROL        0x82
+#define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET       0x83
+#define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH    0x84
+#define ATOM_BIOS_FUNCTION_HW_ICON              0x8A
+#define ATOM_BIOS_FUNCTION_SET_CMOS             0x8B
+#define SUB_FUNCTION_UPDATE_DISPLAY_INFO        0x8000	/*  Sub function 80 */
+#define SUB_FUNCTION_UPDATE_EXPANSION_INFO      0x8100	/*  Sub function 80 */
+
+#define ATOM_BIOS_FUNCTION_DISPLAY_INFO         0x8D
+#define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF        0x8E
+#define ATOM_BIOS_FUNCTION_VIDEO_STATE          0x8F
+#define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE    0x0300	/*  Sub function 03 */
+#define ATOM_SUB_FUNCTION_GET_LIDSTATE          0x0700	/*  Sub function 7 */
+#define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE  0x1400	/*  Notify caller the current thermal state */
+#define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300	/*  Notify caller the current critical state */
+#define ATOM_SUB_FUNCTION_SET_LIDSTATE          0x8500	/*  Sub function 85 */
+#define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900	/*  Sub function 89 */
+#define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT    0x9400	/*  Notify caller that ADC is supported */
+
+#define ATOM_BIOS_FUNCTION_VESA_DPMS            0x4F10	/*  Set DPMS */
+#define ATOM_SUB_FUNCTION_SET_DPMS              0x0001	/*  BL: Sub function 01 */
+#define ATOM_SUB_FUNCTION_GET_DPMS              0x0002	/*  BL: Sub function 02 */
+#define ATOM_PARAMETER_VESA_DPMS_ON             0x0000	/*  BH Parameter for DPMS ON. */
+#define ATOM_PARAMETER_VESA_DPMS_STANDBY        0x0100	/*  BH Parameter for DPMS STANDBY */
+#define ATOM_PARAMETER_VESA_DPMS_SUSPEND        0x0200	/*  BH Parameter for DPMS SUSPEND */
+#define ATOM_PARAMETER_VESA_DPMS_OFF            0x0400	/*  BH Parameter for DPMS OFF */
+#define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON      0x0800	/*  BH Parameter for DPMS REDUCE ON (NOT SUPPORTED) */
+
+#define ATOM_BIOS_RETURN_CODE_MASK              0x0000FF00L
+#define ATOM_BIOS_REG_HIGH_MASK                 0x0000FF00L
+#define ATOM_BIOS_REG_LOW_MASK                  0x000000FFL
+
+/*  structure used for VBIOS only */
+
+/* DispOutInfoTable */
+typedef struct _ASIC_TRANSMITTER_INFO {
+	USHORT usTransmitterObjId;
+	USHORT usSupportDevice;
+	UCHAR ucTransmitterCmdTblId;
+	UCHAR ucConfig;
+	UCHAR ucEncoderID;	/* available 1st encoder ( default ) */
+	UCHAR ucOptionEncoderID;	/* available 2nd encoder ( optional ) */
+	UCHAR uc2ndEncoderID;
+	UCHAR ucReserved;
+} ASIC_TRANSMITTER_INFO;
+
+typedef struct _ASIC_ENCODER_INFO {
+	UCHAR ucEncoderID;
+	UCHAR ucEncoderConfig;
+	USHORT usEncoderCmdTblId;
+} ASIC_ENCODER_INFO;
+
+typedef struct _ATOM_DISP_OUT_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT ptrTransmitterInfo;
+	USHORT ptrEncoderInfo;
+	ASIC_TRANSMITTER_INFO asTransmitterInfo[1];
+	ASIC_ENCODER_INFO asEncoderInfo[1];
+} ATOM_DISP_OUT_INFO;
+
+/*  DispDevicePriorityInfo */
+typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT asDevicePriority[16];
+} ATOM_DISPLAY_DEVICE_PRIORITY_INFO;
+
+/* ProcessAuxChannelTransactionTable */
+typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS {
+	USHORT lpAuxRequest;
+	USHORT lpDataOut;
+	UCHAR ucChannelID;
+	union {
+		UCHAR ucReplyStatus;
+		UCHAR ucDelay;
+	};
+	UCHAR ucDataOutLen;
+	UCHAR ucReserved;
+} PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS;
+
+#define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION			PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
+
+/* GetSinkType */
+
+typedef struct _DP_ENCODER_SERVICE_PARAMETERS {
+	USHORT ucLinkClock;
+	union {
+		UCHAR ucConfig;	/*  for DP training command */
+		UCHAR ucI2cId;	/*  use for GET_SINK_TYPE command */
+	};
+	UCHAR ucAction;
+	UCHAR ucStatus;
+	UCHAR ucLaneNum;
+	UCHAR ucReserved[2];
+} DP_ENCODER_SERVICE_PARAMETERS;
+
+/*  ucAction */
+#define ATOM_DP_ACTION_GET_SINK_TYPE							0x01
+#define ATOM_DP_ACTION_TRAINING_START							0x02
+#define ATOM_DP_ACTION_TRAINING_COMPLETE					0x03
+#define ATOM_DP_ACTION_TRAINING_PATTERN_SEL				0x04
+#define ATOM_DP_ACTION_SET_VSWING_PREEMP					0x05
+#define ATOM_DP_ACTION_GET_VSWING_PREEMP					0x06
+#define ATOM_DP_ACTION_BLANKING                   0x07
+
+/*  ucConfig */
+#define ATOM_DP_CONFIG_ENCODER_SEL_MASK						0x03
+#define ATOM_DP_CONFIG_DIG1_ENCODER								0x00
+#define ATOM_DP_CONFIG_DIG2_ENCODER								0x01
+#define ATOM_DP_CONFIG_EXTERNAL_ENCODER						0x02
+#define ATOM_DP_CONFIG_LINK_SEL_MASK							0x04
+#define ATOM_DP_CONFIG_LINK_A											0x00
+#define ATOM_DP_CONFIG_LINK_B											0x04
+
+#define DP_ENCODER_SERVICE_PS_ALLOCATION				WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+/*  DP_TRAINING_TABLE */
+#define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR				ATOM_DP_TRAINING_TBL_ADDR
+#define DPCD_SET_SS_CNTL_TBL_ADDR													(ATOM_DP_TRAINING_TBL_ADDR + 8 )
+#define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 16)
+#define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 24)
+#define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 32)
+#define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 40)
+#define	DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 48)
+#define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 60)
+#define DP_I2C_AUX_DDC_WRITE_TBL_ADDR											(ATOM_DP_TRAINING_TBL_ADDR + 64)
+#define DP_I2C_AUX_DDC_READ_START_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 72)
+#define DP_I2C_AUX_DDC_READ_TBL_ADDR											(ATOM_DP_TRAINING_TBL_ADDR + 76)
+#define DP_I2C_AUX_DDC_READ_END_TBL_ADDR									(ATOM_DP_TRAINING_TBL_ADDR + 80)
+
+typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS {
+	UCHAR ucI2CSpeed;
+	union {
+		UCHAR ucRegIndex;
+		UCHAR ucStatus;
+	};
+	USHORT lpI2CDataOut;
+	UCHAR ucFlag;
+	UCHAR ucTransBytes;
+	UCHAR ucSlaveAddr;
+	UCHAR ucLineNumber;
+} PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS;
+
+#define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION       PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
+
+/* ucFlag */
+#define HW_I2C_WRITE        1
+#define HW_I2C_READ         0
+
+/****************************************************************************/
+/* Portion VI: Definitinos being oboselete */
+/****************************************************************************/
+
+/* ========================================================================================== */
+/* Remove the definitions below when driver is ready! */
+typedef struct _ATOM_DAC_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usMaxFrequency;	/*  in 10kHz unit */
+	USHORT usReserved;
+} ATOM_DAC_INFO;
+
+typedef struct _COMPASSIONATE_DATA {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+
+	/* ==============================  DAC1 portion */
+	UCHAR ucDAC1_BG_Adjustment;
+	UCHAR ucDAC1_DAC_Adjustment;
+	USHORT usDAC1_FORCE_Data;
+	/* ==============================  DAC2 portion */
+	UCHAR ucDAC2_CRT2_BG_Adjustment;
+	UCHAR ucDAC2_CRT2_DAC_Adjustment;
+	USHORT usDAC2_CRT2_FORCE_Data;
+	USHORT usDAC2_CRT2_MUX_RegisterIndex;
+	UCHAR ucDAC2_CRT2_MUX_RegisterInfo;	/* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
+	UCHAR ucDAC2_NTSC_BG_Adjustment;
+	UCHAR ucDAC2_NTSC_DAC_Adjustment;
+	USHORT usDAC2_TV1_FORCE_Data;
+	USHORT usDAC2_TV1_MUX_RegisterIndex;
+	UCHAR ucDAC2_TV1_MUX_RegisterInfo;	/* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
+	UCHAR ucDAC2_CV_BG_Adjustment;
+	UCHAR ucDAC2_CV_DAC_Adjustment;
+	USHORT usDAC2_CV_FORCE_Data;
+	USHORT usDAC2_CV_MUX_RegisterIndex;
+	UCHAR ucDAC2_CV_MUX_RegisterInfo;	/* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
+	UCHAR ucDAC2_PAL_BG_Adjustment;
+	UCHAR ucDAC2_PAL_DAC_Adjustment;
+	USHORT usDAC2_TV2_FORCE_Data;
+} COMPASSIONATE_DATA;
+
+/****************************Supported Device Info Table Definitions**********************/
+/*   ucConnectInfo: */
+/*     [7:4] - connector type */
+/*       = 1   - VGA connector */
+/*       = 2   - DVI-I */
+/*       = 3   - DVI-D */
+/*       = 4   - DVI-A */
+/*       = 5   - SVIDEO */
+/*       = 6   - COMPOSITE */
+/*       = 7   - LVDS */
+/*       = 8   - DIGITAL LINK */
+/*       = 9   - SCART */
+/*       = 0xA - HDMI_type A */
+/*       = 0xB - HDMI_type B */
+/*       = 0xE - Special case1 (DVI+DIN) */
+/*       Others=TBD */
+/*     [3:0] - DAC Associated */
+/*       = 0   - no DAC */
+/*       = 1   - DACA */
+/*       = 2   - DACB */
+/*       = 3   - External DAC */
+/*       Others=TBD */
+/*  */
+
+typedef struct _ATOM_CONNECTOR_INFO {
+#if ATOM_BIG_ENDIAN
+	UCHAR bfConnectorType:4;
+	UCHAR bfAssociatedDAC:4;
+#else
+	UCHAR bfAssociatedDAC:4;
+	UCHAR bfConnectorType:4;
+#endif
+} ATOM_CONNECTOR_INFO;
+
+typedef union _ATOM_CONNECTOR_INFO_ACCESS {
+	ATOM_CONNECTOR_INFO sbfAccess;
+	UCHAR ucAccess;
+} ATOM_CONNECTOR_INFO_ACCESS;
+
+typedef struct _ATOM_CONNECTOR_INFO_I2C {
+	ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo;
+	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
+} ATOM_CONNECTOR_INFO_I2C;
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usDeviceSupport;
+	ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO];
+} ATOM_SUPPORTED_DEVICES_INFO;
+
+#define NO_INT_SRC_MAPPED       0xFF
+
+typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP {
+	UCHAR ucIntSrcBitmap;
+} ATOM_CONNECTOR_INC_SRC_BITMAP;
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usDeviceSupport;
+	ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
+	ATOM_CONNECTOR_INC_SRC_BITMAP
+	    asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
+} ATOM_SUPPORTED_DEVICES_INFO_2;
+
+typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usDeviceSupport;
+	ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE];
+	ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE];
+} ATOM_SUPPORTED_DEVICES_INFO_2d1;
+
+#define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
+
+typedef struct _ATOM_MISC_CONTROL_INFO {
+	USHORT usFrequency;
+	UCHAR ucPLL_ChargePump;	/*  PLL charge-pump gain control */
+	UCHAR ucPLL_DutyCycle;	/*  PLL duty cycle control */
+	UCHAR ucPLL_VCO_Gain;	/*  PLL VCO gain control */
+	UCHAR ucPLL_VoltageSwing;	/*  PLL driver voltage swing control */
+} ATOM_MISC_CONTROL_INFO;
+
+#define ATOM_MAX_MISC_INFO       4
+
+typedef struct _ATOM_TMDS_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usMaxFrequency;	/*  in 10Khz */
+	ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO];
+} ATOM_TMDS_INFO;
+
+typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE {
+	UCHAR ucTVStandard;	/* Same as TV standards defined above, */
+	UCHAR ucPadding[1];
+} ATOM_ENCODER_ANALOG_ATTRIBUTE;
+
+typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE {
+	UCHAR ucAttribute;	/* Same as other digital encoder attributes defined above */
+	UCHAR ucPadding[1];
+} ATOM_ENCODER_DIGITAL_ATTRIBUTE;
+
+typedef union _ATOM_ENCODER_ATTRIBUTE {
+	ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib;
+	ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib;
+} ATOM_ENCODER_ATTRIBUTE;
+
+typedef struct _DVO_ENCODER_CONTROL_PARAMETERS {
+	USHORT usPixelClock;
+	USHORT usEncoderID;
+	UCHAR ucDeviceType;	/* Use ATOM_DEVICE_xxx1_Index to indicate device type only. */
+	UCHAR ucAction;		/* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */
+	ATOM_ENCODER_ATTRIBUTE usDevAttr;
+} DVO_ENCODER_CONTROL_PARAMETERS;
+
+typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION {
+	DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder;
+	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;	/* Caller doesn't need to init this portion */
+} DVO_ENCODER_CONTROL_PS_ALLOCATION;
+
+#define ATOM_XTMDS_ASIC_SI164_ID        1
+#define ATOM_XTMDS_ASIC_SI178_ID        2
+#define ATOM_XTMDS_ASIC_TFP513_ID       3
+#define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
+#define ATOM_XTMDS_SUPPORTED_DUALLINK   0x00000002
+#define ATOM_XTMDS_MVPU_FPGA            0x00000004
+
+typedef struct _ATOM_XTMDS_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	USHORT usSingleLinkMaxFrequency;
+	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;	/* Point the ID on which I2C is used to control external chip */
+	UCHAR ucXtransimitterID;
+	UCHAR ucSupportedLink;	/*  Bit field, bit0=1, single link supported;bit1=1,dual link supported */
+	UCHAR ucSequnceAlterID;	/*  Even with the same external TMDS asic, it's possible that the program seqence alters */
+	/*  due to design. This ID is used to alert driver that the sequence is not "standard"! */
+	UCHAR ucMasterAddress;	/*  Address to control Master xTMDS Chip */
+	UCHAR ucSlaveAddress;	/*  Address to control Slave xTMDS Chip */
+} ATOM_XTMDS_INFO;
+
+typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS {
+	UCHAR ucEnable;		/*  ATOM_ENABLE=On or ATOM_DISABLE=Off */
+	UCHAR ucDevice;		/*  ATOM_DEVICE_DFP1_INDEX.... */
+	UCHAR ucPadding[2];
+} DFP_DPMS_STATUS_CHANGE_PARAMETERS;
+
+/****************************Legacy Power Play Table Definitions **********************/
+
+/* Definitions for ulPowerPlayMiscInfo */
+#define ATOM_PM_MISCINFO_SPLIT_CLOCK                     0x00000000L
+#define ATOM_PM_MISCINFO_USING_MCLK_SRC                  0x00000001L
+#define ATOM_PM_MISCINFO_USING_SCLK_SRC                  0x00000002L
+
+#define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT            0x00000004L
+#define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH        0x00000008L
+
+#define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN             0x00000010L
+
+#define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN          0x00000020L
+#define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN          0x00000040L
+#define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE                 0x00000080L	/* When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program */
+
+#define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN      0x00000100L
+#define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN         0x00000200L
+#define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN              0x00000400L
+#define ATOM_PM_MISCINFO_LOAD_BALANCE_EN                 0x00000800L
+#define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE     0x00001000L
+#define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
+#define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE            0x00004000L
+
+#define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE             0x00008000L
+#define ATOM_PM_MISCINFO_OVER_CLOCK_MODE                 0x00010000L
+#define ATOM_PM_MISCINFO_OVER_DRIVE_MODE                 0x00020000L
+#define ATOM_PM_MISCINFO_POWER_SAVING_MODE               0x00040000L
+#define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE              0x00080000L
+
+#define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK           0x00300000L	/* 0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved */
+#define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT          20
+
+#define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE                 0x00400000L
+#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2      0x00800000L
+#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4      0x01000000L
+#define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN            0x02000000L	/* When set, Dynamic */
+#define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN        0x04000000L	/* When set, Dynamic */
+#define ATOM_PM_MISCINFO_3D_ACCELERATION_EN              0x08000000L	/* When set, This mode is for acceleated 3D mode */
+
+#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK   0x70000000L	/* 1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks) */
+#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT  28
+#define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS                0x80000000L
+
+#define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE            0x00000001L
+#define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT          0x00000002L
+#define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN           0x00000004L
+#define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO            0x00000008L
+#define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE              0x00000010L
+#define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN       0x00000020L
+#define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE         0x00000040L	/* If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption. */
+								      /* If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback */
+#define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC                0x00000080L
+#define ATOM_PM_MISCINFO2_STUTTER_MODE_EN                0x00000100L
+#define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE               0x00000200L
+
+/* ucTableFormatRevision=1 */
+/* ucTableContentRevision=1 */
+typedef struct _ATOM_POWERMODE_INFO {
+	ULONG ulMiscInfo;	/* The power level should be arranged in ascending order */
+	ULONG ulReserved1;	/*  must set to 0 */
+	ULONG ulReserved2;	/*  must set to 0 */
+	USHORT usEngineClock;
+	USHORT usMemoryClock;
+	UCHAR ucVoltageDropIndex;	/*  index to GPIO table */
+	UCHAR ucSelectedPanel_RefreshRate;	/*  panel refresh rate */
+	UCHAR ucMinTemperature;
+	UCHAR ucMaxTemperature;
+	UCHAR ucNumPciELanes;	/*  number of PCIE lanes */
+} ATOM_POWERMODE_INFO;
+
+/* ucTableFormatRevision=2 */
+/* ucTableContentRevision=1 */
+typedef struct _ATOM_POWERMODE_INFO_V2 {
+	ULONG ulMiscInfo;	/* The power level should be arranged in ascending order */
+	ULONG ulMiscInfo2;
+	ULONG ulEngineClock;
+	ULONG ulMemoryClock;
+	UCHAR ucVoltageDropIndex;	/*  index to GPIO table */
+	UCHAR ucSelectedPanel_RefreshRate;	/*  panel refresh rate */
+	UCHAR ucMinTemperature;
+	UCHAR ucMaxTemperature;
+	UCHAR ucNumPciELanes;	/*  number of PCIE lanes */
+} ATOM_POWERMODE_INFO_V2;
+
+/* ucTableFormatRevision=2 */
+/* ucTableContentRevision=2 */
+typedef struct _ATOM_POWERMODE_INFO_V3 {
+	ULONG ulMiscInfo;	/* The power level should be arranged in ascending order */
+	ULONG ulMiscInfo2;
+	ULONG ulEngineClock;
+	ULONG ulMemoryClock;
+	UCHAR ucVoltageDropIndex;	/*  index to Core (VDDC) votage table */
+	UCHAR ucSelectedPanel_RefreshRate;	/*  panel refresh rate */
+	UCHAR ucMinTemperature;
+	UCHAR ucMaxTemperature;
+	UCHAR ucNumPciELanes;	/*  number of PCIE lanes */
+	UCHAR ucVDDCI_VoltageDropIndex;	/*  index to VDDCI votage table */
+} ATOM_POWERMODE_INFO_V3;
+
+#define ATOM_MAX_NUMBEROF_POWER_BLOCK  8
+
+#define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN            0x01
+#define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE         0x02
+
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63      0x01
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032   0x02
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030   0x03
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649   0x04
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64      0x05
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375    0x06
+#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512   0x07	/*  Andigilog */
+
+typedef struct _ATOM_POWERPLAY_INFO {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR ucOverdriveThermalController;
+	UCHAR ucOverdriveI2cLine;
+	UCHAR ucOverdriveIntBitmap;
+	UCHAR ucOverdriveControllerAddress;
+	UCHAR ucSizeOfPowerModeEntry;
+	UCHAR ucNumOfPowerModeEntries;
+	ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+} ATOM_POWERPLAY_INFO;
+
+typedef struct _ATOM_POWERPLAY_INFO_V2 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR ucOverdriveThermalController;
+	UCHAR ucOverdriveI2cLine;
+	UCHAR ucOverdriveIntBitmap;
+	UCHAR ucOverdriveControllerAddress;
+	UCHAR ucSizeOfPowerModeEntry;
+	UCHAR ucNumOfPowerModeEntries;
+	ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+} ATOM_POWERPLAY_INFO_V2;
+
+typedef struct _ATOM_POWERPLAY_INFO_V3 {
+	ATOM_COMMON_TABLE_HEADER sHeader;
+	UCHAR ucOverdriveThermalController;
+	UCHAR ucOverdriveI2cLine;
+	UCHAR ucOverdriveIntBitmap;
+	UCHAR ucOverdriveControllerAddress;
+	UCHAR ucSizeOfPowerModeEntry;
+	UCHAR ucNumOfPowerModeEntries;
+	ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
+} ATOM_POWERPLAY_INFO_V3;
+
+/**************************************************************************/
+
+/*  Following definitions are for compatiblity issue in different SW components. */
+#define ATOM_MASTER_DATA_TABLE_REVISION   0x01
+#define Object_Info												Object_Header
+#define	AdjustARB_SEQ											MC_InitParameter
+#define	VRAM_GPIO_DetectionInfo						VoltageObjectInfo
+#define	ASIC_VDDCI_Info                   ASIC_ProfilingInfo
+#define ASIC_MVDDQ_Info										MemoryTrainingInfo
+#define SS_Info                           PPLL_SS_Info
+#define ASIC_MVDDC_Info                   ASIC_InternalSS_Info
+#define DispDevicePriorityInfo						SaveRestoreInfo
+#define DispOutInfo												TV_VideoMode
+
+#define ATOM_ENCODER_OBJECT_TABLE         ATOM_OBJECT_TABLE
+#define ATOM_CONNECTOR_OBJECT_TABLE       ATOM_OBJECT_TABLE
+
+/* New device naming, remove them when both DAL/VBIOS is ready */
+#define DFP2I_OUTPUT_CONTROL_PARAMETERS    CRT1_OUTPUT_CONTROL_PARAMETERS
+#define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
+
+#define DFP1X_OUTPUT_CONTROL_PARAMETERS    CRT1_OUTPUT_CONTROL_PARAMETERS
+#define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
+
+#define DFP1I_OUTPUT_CONTROL_PARAMETERS    DFP1_OUTPUT_CONTROL_PARAMETERS
+#define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
+
+#define ATOM_DEVICE_DFP1I_SUPPORT          ATOM_DEVICE_DFP1_SUPPORT
+#define ATOM_DEVICE_DFP1X_SUPPORT          ATOM_DEVICE_DFP2_SUPPORT
+
+#define ATOM_DEVICE_DFP1I_INDEX            ATOM_DEVICE_DFP1_INDEX
+#define ATOM_DEVICE_DFP1X_INDEX            ATOM_DEVICE_DFP2_INDEX
+
+#define ATOM_DEVICE_DFP2I_INDEX            0x00000009
+#define ATOM_DEVICE_DFP2I_SUPPORT          (0x1L << ATOM_DEVICE_DFP2I_INDEX)
+
+#define ATOM_S0_DFP1I                      ATOM_S0_DFP1
+#define ATOM_S0_DFP1X                      ATOM_S0_DFP2
+
+#define ATOM_S0_DFP2I                      0x00200000L
+#define ATOM_S0_DFP2Ib2                    0x20
+
+#define ATOM_S2_DFP1I_DPMS_STATE           ATOM_S2_DFP1_DPMS_STATE
+#define ATOM_S2_DFP1X_DPMS_STATE           ATOM_S2_DFP2_DPMS_STATE
+
+#define ATOM_S2_DFP2I_DPMS_STATE           0x02000000L
+#define ATOM_S2_DFP2I_DPMS_STATEb3         0x02
+
+#define ATOM_S3_DFP2I_ACTIVEb1             0x02
+
+#define ATOM_S3_DFP1I_ACTIVE               ATOM_S3_DFP1_ACTIVE
+#define ATOM_S3_DFP1X_ACTIVE               ATOM_S3_DFP2_ACTIVE
+
+#define ATOM_S3_DFP2I_ACTIVE               0x00000200L
+
+#define ATOM_S3_DFP1I_CRTC_ACTIVE          ATOM_S3_DFP1_CRTC_ACTIVE
+#define ATOM_S3_DFP1X_CRTC_ACTIVE          ATOM_S3_DFP2_CRTC_ACTIVE
+#define ATOM_S3_DFP2I_CRTC_ACTIVE          0x02000000L
+
+#define ATOM_S3_DFP2I_CRTC_ACTIVEb3        0x02
+#define ATOM_S5_DOS_REQ_DFP2Ib1            0x02
+
+#define ATOM_S5_DOS_REQ_DFP2I              0x0200
+#define ATOM_S6_ACC_REQ_DFP1I              ATOM_S6_ACC_REQ_DFP1
+#define ATOM_S6_ACC_REQ_DFP1X              ATOM_S6_ACC_REQ_DFP2
+
+#define ATOM_S6_ACC_REQ_DFP2Ib3            0x02
+#define ATOM_S6_ACC_REQ_DFP2I              0x02000000L
+
+#define TMDS1XEncoderControl               DVOEncoderControl
+#define DFP1XOutputControl                 DVOOutputControl
+
+#define ExternalDFPOutputControl           DFP1XOutputControl
+#define EnableExternalTMDS_Encoder         TMDS1XEncoderControl
+
+#define DFP1IOutputControl                 TMDSAOutputControl
+#define DFP2IOutputControl                 LVTMAOutputControl
+
+#define DAC1_ENCODER_CONTROL_PARAMETERS    DAC_ENCODER_CONTROL_PARAMETERS
+#define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
+
+#define DAC2_ENCODER_CONTROL_PARAMETERS    DAC_ENCODER_CONTROL_PARAMETERS
+#define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
+
+#define ucDac1Standard  ucDacStandard
+#define ucDac2Standard  ucDacStandard
+
+#define TMDS1EncoderControl TMDSAEncoderControl
+#define TMDS2EncoderControl LVTMAEncoderControl
+
+#define DFP1OutputControl   TMDSAOutputControl
+#define DFP2OutputControl   LVTMAOutputControl
+#define CRT1OutputControl   DAC1OutputControl
+#define CRT2OutputControl   DAC2OutputControl
+
+/* These two lines will be removed for sure in a few days, will follow up with Michael V. */
+#define EnableLVDS_SS   EnableSpreadSpectrumOnPPLL
+#define ENABLE_LVDS_SS_PARAMETERS_V3  ENABLE_SPREAD_SPECTRUM_ON_PPLL
+
+/*********************************************************************************/
+
+#pragma pack()			/*  BIOS data must use byte aligment */
+
+#endif /* _ATOMBIOS_H */
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
new file mode 100644
index 00000000000..c0080cc9bf8
--- /dev/null
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -0,0 +1,695 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/radeon_drm.h>
+#include "radeon_fixed.h"
+#include "radeon.h"
+#include "atom.h"
+#include "atom-bits.h"
+
+static void atombios_lock_crtc(struct drm_crtc *crtc, int lock)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	int index =
+	    GetIndexIntoMasterTable(COMMAND, UpdateCRTC_DoubleBufferRegisters);
+	ENABLE_CRTC_PS_ALLOCATION args;
+
+	memset(&args, 0, sizeof(args));
+
+	args.ucCRTC = radeon_crtc->crtc_id;
+	args.ucEnable = lock;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+static void atombios_enable_crtc(struct drm_crtc *crtc, int state)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	int index = GetIndexIntoMasterTable(COMMAND, EnableCRTC);
+	ENABLE_CRTC_PS_ALLOCATION args;
+
+	memset(&args, 0, sizeof(args));
+
+	args.ucCRTC = radeon_crtc->crtc_id;
+	args.ucEnable = state;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+static void atombios_enable_crtc_memreq(struct drm_crtc *crtc, int state)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	int index = GetIndexIntoMasterTable(COMMAND, EnableCRTCMemReq);
+	ENABLE_CRTC_PS_ALLOCATION args;
+
+	memset(&args, 0, sizeof(args));
+
+	args.ucCRTC = radeon_crtc->crtc_id;
+	args.ucEnable = state;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+static void atombios_blank_crtc(struct drm_crtc *crtc, int state)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	int index = GetIndexIntoMasterTable(COMMAND, BlankCRTC);
+	BLANK_CRTC_PS_ALLOCATION args;
+
+	memset(&args, 0, sizeof(args));
+
+	args.ucCRTC = radeon_crtc->crtc_id;
+	args.ucBlanking = state;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+void atombios_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		if (ASIC_IS_DCE3(rdev))
+			atombios_enable_crtc_memreq(crtc, 1);
+		atombios_enable_crtc(crtc, 1);
+		atombios_blank_crtc(crtc, 0);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		atombios_blank_crtc(crtc, 1);
+		atombios_enable_crtc(crtc, 0);
+		if (ASIC_IS_DCE3(rdev))
+			atombios_enable_crtc_memreq(crtc, 0);
+		break;
+	}
+
+	if (mode != DRM_MODE_DPMS_OFF) {
+		radeon_crtc_load_lut(crtc);
+	}
+}
+
+static void
+atombios_set_crtc_dtd_timing(struct drm_crtc *crtc,
+			     SET_CRTC_USING_DTD_TIMING_PARAMETERS * crtc_param)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	SET_CRTC_USING_DTD_TIMING_PARAMETERS conv_param;
+	int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_UsingDTDTiming);
+
+	conv_param.usH_Size = cpu_to_le16(crtc_param->usH_Size);
+	conv_param.usH_Blanking_Time =
+	    cpu_to_le16(crtc_param->usH_Blanking_Time);
+	conv_param.usV_Size = cpu_to_le16(crtc_param->usV_Size);
+	conv_param.usV_Blanking_Time =
+	    cpu_to_le16(crtc_param->usV_Blanking_Time);
+	conv_param.usH_SyncOffset = cpu_to_le16(crtc_param->usH_SyncOffset);
+	conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth);
+	conv_param.usV_SyncOffset = cpu_to_le16(crtc_param->usV_SyncOffset);
+	conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth);
+	conv_param.susModeMiscInfo.usAccess =
+	    cpu_to_le16(crtc_param->susModeMiscInfo.usAccess);
+	conv_param.ucCRTC = crtc_param->ucCRTC;
+
+	printk("executing set crtc dtd timing\n");
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param);
+}
+
+void atombios_crtc_set_timing(struct drm_crtc *crtc,
+			      SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *
+			      crtc_param)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION conv_param;
+	int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_Timing);
+
+	conv_param.usH_Total = cpu_to_le16(crtc_param->usH_Total);
+	conv_param.usH_Disp = cpu_to_le16(crtc_param->usH_Disp);
+	conv_param.usH_SyncStart = cpu_to_le16(crtc_param->usH_SyncStart);
+	conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth);
+	conv_param.usV_Total = cpu_to_le16(crtc_param->usV_Total);
+	conv_param.usV_Disp = cpu_to_le16(crtc_param->usV_Disp);
+	conv_param.usV_SyncStart = cpu_to_le16(crtc_param->usV_SyncStart);
+	conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth);
+	conv_param.susModeMiscInfo.usAccess =
+	    cpu_to_le16(crtc_param->susModeMiscInfo.usAccess);
+	conv_param.ucCRTC = crtc_param->ucCRTC;
+	conv_param.ucOverscanRight = crtc_param->ucOverscanRight;
+	conv_param.ucOverscanLeft = crtc_param->ucOverscanLeft;
+	conv_param.ucOverscanBottom = crtc_param->ucOverscanBottom;
+	conv_param.ucOverscanTop = crtc_param->ucOverscanTop;
+	conv_param.ucReserved = crtc_param->ucReserved;
+
+	printk("executing set crtc timing\n");
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param);
+}
+
+void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_encoder *encoder = NULL;
+	struct radeon_encoder *radeon_encoder = NULL;
+	uint8_t frev, crev;
+	int index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
+	SET_PIXEL_CLOCK_PS_ALLOCATION args;
+	PIXEL_CLOCK_PARAMETERS *spc1_ptr;
+	PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr;
+	PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr;
+	uint32_t sclock = mode->clock;
+	uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
+	struct radeon_pll *pll;
+	int pll_flags = 0;
+
+	memset(&args, 0, sizeof(args));
+
+	if (ASIC_IS_AVIVO(rdev)) {
+		uint32_t ss_cntl;
+
+		if (ASIC_IS_DCE32(rdev) && mode->clock > 200000)	/* range limits??? */
+			pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+		else
+			pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+
+		/* disable spread spectrum clocking for now -- thanks Hedy Lamarr */
+		if (radeon_crtc->crtc_id == 0) {
+			ss_cntl = RREG32(AVIVO_P1PLL_INT_SS_CNTL);
+			WREG32(AVIVO_P1PLL_INT_SS_CNTL, ss_cntl & ~1);
+		} else {
+			ss_cntl = RREG32(AVIVO_P2PLL_INT_SS_CNTL);
+			WREG32(AVIVO_P2PLL_INT_SS_CNTL, ss_cntl & ~1);
+		}
+	} else {
+		pll_flags |= RADEON_PLL_LEGACY;
+
+		if (mode->clock > 200000)	/* range limits??? */
+			pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+		else
+			pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+
+	}
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		if (encoder->crtc == crtc) {
+			if (!ASIC_IS_AVIVO(rdev)) {
+				if (encoder->encoder_type !=
+				    DRM_MODE_ENCODER_DAC)
+					pll_flags |= RADEON_PLL_NO_ODD_POST_DIV;
+				if (!ASIC_IS_AVIVO(rdev)
+				    && (encoder->encoder_type ==
+					DRM_MODE_ENCODER_LVDS))
+					pll_flags |= RADEON_PLL_USE_REF_DIV;
+			}
+			radeon_encoder = to_radeon_encoder(encoder);
+		}
+	}
+
+	if (radeon_crtc->crtc_id == 0)
+		pll = &rdev->clock.p1pll;
+	else
+		pll = &rdev->clock.p2pll;
+
+	radeon_compute_pll(pll, mode->clock, &sclock, &fb_div, &frac_fb_div,
+			   &ref_div, &post_div, pll_flags);
+
+	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+			      &crev);
+
+	switch (frev) {
+	case 1:
+		switch (crev) {
+		case 1:
+			spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput;
+			spc1_ptr->usPixelClock = cpu_to_le16(sclock);
+			spc1_ptr->usRefDiv = cpu_to_le16(ref_div);
+			spc1_ptr->usFbDiv = cpu_to_le16(fb_div);
+			spc1_ptr->ucFracFbDiv = frac_fb_div;
+			spc1_ptr->ucPostDiv = post_div;
+			spc1_ptr->ucPpll =
+			    radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
+			spc1_ptr->ucCRTC = radeon_crtc->crtc_id;
+			spc1_ptr->ucRefDivSrc = 1;
+			break;
+		case 2:
+			spc2_ptr =
+			    (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput;
+			spc2_ptr->usPixelClock = cpu_to_le16(sclock);
+			spc2_ptr->usRefDiv = cpu_to_le16(ref_div);
+			spc2_ptr->usFbDiv = cpu_to_le16(fb_div);
+			spc2_ptr->ucFracFbDiv = frac_fb_div;
+			spc2_ptr->ucPostDiv = post_div;
+			spc2_ptr->ucPpll =
+			    radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
+			spc2_ptr->ucCRTC = radeon_crtc->crtc_id;
+			spc2_ptr->ucRefDivSrc = 1;
+			break;
+		case 3:
+			if (!encoder)
+				return;
+			spc3_ptr =
+			    (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput;
+			spc3_ptr->usPixelClock = cpu_to_le16(sclock);
+			spc3_ptr->usRefDiv = cpu_to_le16(ref_div);
+			spc3_ptr->usFbDiv = cpu_to_le16(fb_div);
+			spc3_ptr->ucFracFbDiv = frac_fb_div;
+			spc3_ptr->ucPostDiv = post_div;
+			spc3_ptr->ucPpll =
+			    radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
+			spc3_ptr->ucMiscInfo = (radeon_crtc->crtc_id << 2);
+			spc3_ptr->ucTransmitterId = radeon_encoder->encoder_id;
+			spc3_ptr->ucEncoderMode =
+			    atombios_get_encoder_mode(encoder);
+			break;
+		default:
+			DRM_ERROR("Unknown table version %d %d\n", frev, crev);
+			return;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version %d %d\n", frev, crev);
+		return;
+	}
+
+	printk("executing set pll\n");
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+			   struct drm_framebuffer *old_fb)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_framebuffer *radeon_fb;
+	struct drm_gem_object *obj;
+	struct drm_radeon_gem_object *obj_priv;
+	uint64_t fb_location;
+	uint32_t fb_format, fb_pitch_pixels;
+
+	if (!crtc->fb)
+		return -EINVAL;
+
+	radeon_fb = to_radeon_framebuffer(crtc->fb);
+
+	obj = radeon_fb->obj;
+	obj_priv = obj->driver_private;
+
+	if (radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &fb_location)) {
+		return -EINVAL;
+	}
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 15:
+		fb_format =
+		    AVIVO_D1GRPH_CONTROL_DEPTH_16BPP |
+		    AVIVO_D1GRPH_CONTROL_16BPP_ARGB1555;
+		break;
+	case 16:
+		fb_format =
+		    AVIVO_D1GRPH_CONTROL_DEPTH_16BPP |
+		    AVIVO_D1GRPH_CONTROL_16BPP_RGB565;
+		break;
+	case 24:
+	case 32:
+		fb_format =
+		    AVIVO_D1GRPH_CONTROL_DEPTH_32BPP |
+		    AVIVO_D1GRPH_CONTROL_32BPP_ARGB8888;
+		break;
+	default:
+		DRM_ERROR("Unsupported screen depth %d\n",
+			  crtc->fb->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	/* TODO tiling */
+	if (radeon_crtc->crtc_id == 0)
+		WREG32(AVIVO_D1VGA_CONTROL, 0);
+	else
+		WREG32(AVIVO_D2VGA_CONTROL, 0);
+	WREG32(AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset,
+	       (u32) fb_location);
+	WREG32(AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS +
+	       radeon_crtc->crtc_offset, (u32) fb_location);
+	WREG32(AVIVO_D1GRPH_CONTROL + radeon_crtc->crtc_offset, fb_format);
+
+	WREG32(AVIVO_D1GRPH_SURFACE_OFFSET_X + radeon_crtc->crtc_offset, 0);
+	WREG32(AVIVO_D1GRPH_SURFACE_OFFSET_Y + radeon_crtc->crtc_offset, 0);
+	WREG32(AVIVO_D1GRPH_X_START + radeon_crtc->crtc_offset, 0);
+	WREG32(AVIVO_D1GRPH_Y_START + radeon_crtc->crtc_offset, 0);
+	WREG32(AVIVO_D1GRPH_X_END + radeon_crtc->crtc_offset, crtc->fb->width);
+	WREG32(AVIVO_D1GRPH_Y_END + radeon_crtc->crtc_offset, crtc->fb->height);
+
+	fb_pitch_pixels = crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8);
+	WREG32(AVIVO_D1GRPH_PITCH + radeon_crtc->crtc_offset, fb_pitch_pixels);
+	WREG32(AVIVO_D1GRPH_ENABLE + radeon_crtc->crtc_offset, 1);
+
+	WREG32(AVIVO_D1MODE_DESKTOP_HEIGHT + radeon_crtc->crtc_offset,
+	       crtc->mode.vdisplay);
+	x &= ~3;
+	y &= ~1;
+	WREG32(AVIVO_D1MODE_VIEWPORT_START + radeon_crtc->crtc_offset,
+	       (x << 16) | y);
+	WREG32(AVIVO_D1MODE_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
+	       (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
+
+	if (crtc->mode.flags & DRM_MODE_FLAG_INTERLACE)
+		WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset,
+		       AVIVO_D1MODE_INTERLEAVE_EN);
+	else
+		WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, 0);
+
+	if (old_fb && old_fb != crtc->fb) {
+		radeon_fb = to_radeon_framebuffer(old_fb);
+		radeon_gem_object_unpin(radeon_fb->obj);
+	}
+	return 0;
+}
+
+int atombios_crtc_mode_set(struct drm_crtc *crtc,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode,
+			   int x, int y, struct drm_framebuffer *old_fb)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_encoder *encoder;
+	SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION crtc_timing;
+
+	/* TODO color tiling */
+	memset(&crtc_timing, 0, sizeof(crtc_timing));
+
+	/* TODO tv */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+	}
+
+	crtc_timing.ucCRTC = radeon_crtc->crtc_id;
+	crtc_timing.usH_Total = adjusted_mode->crtc_htotal;
+	crtc_timing.usH_Disp = adjusted_mode->crtc_hdisplay;
+	crtc_timing.usH_SyncStart = adjusted_mode->crtc_hsync_start;
+	crtc_timing.usH_SyncWidth =
+	    adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
+
+	crtc_timing.usV_Total = adjusted_mode->crtc_vtotal;
+	crtc_timing.usV_Disp = adjusted_mode->crtc_vdisplay;
+	crtc_timing.usV_SyncStart = adjusted_mode->crtc_vsync_start;
+	crtc_timing.usV_SyncWidth =
+	    adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+		crtc_timing.susModeMiscInfo.usAccess |= ATOM_VSYNC_POLARITY;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+		crtc_timing.susModeMiscInfo.usAccess |= ATOM_HSYNC_POLARITY;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC)
+		crtc_timing.susModeMiscInfo.usAccess |= ATOM_COMPOSITESYNC;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+		crtc_timing.susModeMiscInfo.usAccess |= ATOM_INTERLACE;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		crtc_timing.susModeMiscInfo.usAccess |= ATOM_DOUBLE_CLOCK_MODE;
+
+	atombios_crtc_set_pll(crtc, adjusted_mode);
+	atombios_crtc_set_timing(crtc, &crtc_timing);
+
+	if (ASIC_IS_AVIVO(rdev))
+		atombios_crtc_set_base(crtc, x, y, old_fb);
+	else {
+		if (radeon_crtc->crtc_id == 0) {
+			SET_CRTC_USING_DTD_TIMING_PARAMETERS crtc_dtd_timing;
+			memset(&crtc_dtd_timing, 0, sizeof(crtc_dtd_timing));
+
+			/* setup FP shadow regs on R4xx */
+			crtc_dtd_timing.ucCRTC = radeon_crtc->crtc_id;
+			crtc_dtd_timing.usH_Size = adjusted_mode->crtc_hdisplay;
+			crtc_dtd_timing.usV_Size = adjusted_mode->crtc_vdisplay;
+			crtc_dtd_timing.usH_Blanking_Time =
+			    adjusted_mode->crtc_hblank_end -
+			    adjusted_mode->crtc_hdisplay;
+			crtc_dtd_timing.usV_Blanking_Time =
+			    adjusted_mode->crtc_vblank_end -
+			    adjusted_mode->crtc_vdisplay;
+			crtc_dtd_timing.usH_SyncOffset =
+			    adjusted_mode->crtc_hsync_start -
+			    adjusted_mode->crtc_hdisplay;
+			crtc_dtd_timing.usV_SyncOffset =
+			    adjusted_mode->crtc_vsync_start -
+			    adjusted_mode->crtc_vdisplay;
+			crtc_dtd_timing.usH_SyncWidth =
+			    adjusted_mode->crtc_hsync_end -
+			    adjusted_mode->crtc_hsync_start;
+			crtc_dtd_timing.usV_SyncWidth =
+			    adjusted_mode->crtc_vsync_end -
+			    adjusted_mode->crtc_vsync_start;
+			/* crtc_dtd_timing.ucH_Border = adjusted_mode->crtc_hborder; */
+			/* crtc_dtd_timing.ucV_Border = adjusted_mode->crtc_vborder; */
+
+			if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+				crtc_dtd_timing.susModeMiscInfo.usAccess |=
+				    ATOM_VSYNC_POLARITY;
+
+			if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+				crtc_dtd_timing.susModeMiscInfo.usAccess |=
+				    ATOM_HSYNC_POLARITY;
+
+			if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC)
+				crtc_dtd_timing.susModeMiscInfo.usAccess |=
+				    ATOM_COMPOSITESYNC;
+
+			if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+				crtc_dtd_timing.susModeMiscInfo.usAccess |=
+				    ATOM_INTERLACE;
+
+			if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
+				crtc_dtd_timing.susModeMiscInfo.usAccess |=
+				    ATOM_DOUBLE_CLOCK_MODE;
+
+			atombios_set_crtc_dtd_timing(crtc, &crtc_dtd_timing);
+		}
+		radeon_crtc_set_base(crtc, x, y, old_fb);
+		radeon_legacy_atom_set_surface(crtc);
+	}
+	return 0;
+}
+
+static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc,
+				     struct drm_display_mode *mode,
+				     struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void atombios_crtc_prepare(struct drm_crtc *crtc)
+{
+	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+	atombios_lock_crtc(crtc, 1);
+}
+
+static void atombios_crtc_commit(struct drm_crtc *crtc)
+{
+	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+	atombios_lock_crtc(crtc, 0);
+}
+
+static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
+	.dpms = atombios_crtc_dpms,
+	.mode_fixup = atombios_crtc_mode_fixup,
+	.mode_set = atombios_crtc_mode_set,
+	.mode_set_base = atombios_crtc_set_base,
+	.prepare = atombios_crtc_prepare,
+	.commit = atombios_crtc_commit,
+};
+
+void radeon_atombios_init_crtc(struct drm_device *dev,
+			       struct radeon_crtc *radeon_crtc)
+{
+	if (radeon_crtc->crtc_id == 1)
+		radeon_crtc->crtc_offset =
+		    AVIVO_D2CRTC_H_TOTAL - AVIVO_D1CRTC_H_TOTAL;
+	drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
+}
+
+void radeon_init_disp_bw_avivo(struct drm_device *dev,
+			       struct drm_display_mode *mode1,
+			       uint32_t pixel_bytes1,
+			       struct drm_display_mode *mode2,
+			       uint32_t pixel_bytes2)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	fixed20_12 min_mem_eff;
+	fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff;
+	fixed20_12 sclk_ff, mclk_ff;
+	uint32_t dc_lb_memory_split, temp;
+
+	min_mem_eff.full = rfixed_const_8(0);
+	if (rdev->disp_priority == 2) {
+		uint32_t mc_init_misc_lat_timer = 0;
+		if (rdev->family == CHIP_RV515)
+			mc_init_misc_lat_timer =
+			    RREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER);
+		else if (rdev->family == CHIP_RS690)
+			mc_init_misc_lat_timer =
+			    RREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER);
+
+		mc_init_misc_lat_timer &=
+		    ~(R300_MC_DISP1R_INIT_LAT_MASK <<
+		      R300_MC_DISP1R_INIT_LAT_SHIFT);
+		mc_init_misc_lat_timer &=
+		    ~(R300_MC_DISP0R_INIT_LAT_MASK <<
+		      R300_MC_DISP0R_INIT_LAT_SHIFT);
+
+		if (mode2)
+			mc_init_misc_lat_timer |=
+			    (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
+		if (mode1)
+			mc_init_misc_lat_timer |=
+			    (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
+
+		if (rdev->family == CHIP_RV515)
+			WREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER,
+				  mc_init_misc_lat_timer);
+		else if (rdev->family == CHIP_RS690)
+			WREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER,
+				  mc_init_misc_lat_timer);
+	}
+
+	/*
+	 * determine is there is enough bw for current mode
+	 */
+	temp_ff.full = rfixed_const(100);
+	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
+	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
+	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
+	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+
+	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
+	temp_ff.full = rfixed_const(temp);
+	mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
+	mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
+
+	pix_clk.full = 0;
+	pix_clk2.full = 0;
+	peak_disp_bw.full = 0;
+	if (mode1) {
+		temp_ff.full = rfixed_const(1000);
+		pix_clk.full = rfixed_const(mode1->clock);	/* convert to fixed point */
+		pix_clk.full = rfixed_div(pix_clk, temp_ff);
+		temp_ff.full = rfixed_const(pixel_bytes1);
+		peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
+	}
+	if (mode2) {
+		temp_ff.full = rfixed_const(1000);
+		pix_clk2.full = rfixed_const(mode2->clock);	/* convert to fixed point */
+		pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
+		temp_ff.full = rfixed_const(pixel_bytes2);
+		peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
+	}
+
+	if (peak_disp_bw.full >= mem_bw.full) {
+		DRM_ERROR
+		    ("You may not have enough display bandwidth for current mode\n"
+		     "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
+		printk("peak disp bw %d, mem_bw %d\n",
+		       rfixed_trunc(peak_disp_bw), rfixed_trunc(mem_bw));
+	}
+
+	/*
+	 * Line Buffer Setup
+	 * There is a single line buffer shared by both display controllers.
+	 * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between the display
+	 * controllers.  The paritioning can either be done manually or via one of four
+	 * preset allocations specified in bits 1:0:
+	 * 0 - line buffer is divided in half and shared between each display controller
+	 * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
+	 * 2 - D1 gets the whole buffer
+	 * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
+	 * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual allocation mode.
+	 * In manual allocation mode, D1 always starts at 0, D1 end/2 is specified in bits
+	 * 14:4; D2 allocation follows D1.
+	 */
+
+	/* is auto or manual better ? */
+	dc_lb_memory_split =
+	    RREG32(AVIVO_DC_LB_MEMORY_SPLIT) & ~AVIVO_DC_LB_MEMORY_SPLIT_MASK;
+	dc_lb_memory_split &= ~AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+#if 1
+	/* auto */
+	if (mode1 && mode2) {
+		if (mode1->hdisplay > mode2->hdisplay) {
+			if (mode1->hdisplay > 2560)
+				dc_lb_memory_split |=
+				    AVIVO_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
+			else
+				dc_lb_memory_split |=
+				    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+		} else if (mode2->hdisplay > mode1->hdisplay) {
+			if (mode2->hdisplay > 2560)
+				dc_lb_memory_split |=
+				    AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+			else
+				dc_lb_memory_split |=
+				    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+		} else
+			dc_lb_memory_split |=
+			    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+	} else if (mode1) {
+		dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_ONLY;
+	} else if (mode2) {
+		dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+	}
+#else
+	/* manual */
+	dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+	dc_lb_memory_split &=
+	    ~(AVIVO_DC_LB_DISP1_END_ADR_MASK <<
+	      AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
+	if (mode1) {
+		dc_lb_memory_split |=
+		    ((((mode1->hdisplay / 2) + 64) & AVIVO_DC_LB_DISP1_END_ADR_MASK)
+		     << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
+	} else if (mode2) {
+		dc_lb_memory_split |= (0 << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
+	}
+#endif
+	WREG32(AVIVO_DC_LB_MEMORY_SPLIT, dc_lb_memory_split);
+}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
new file mode 100644
index 00000000000..5225f5be7ea
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -0,0 +1,1524 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include <linux/seq_file.h>
+#include "drmP.h"
+#include "drm.h"
+#include "radeon_drm.h"
+#include "radeon_microcode.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* This files gather functions specifics to:
+ * r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+void r100_hdp_reset(struct radeon_device *rdev);
+void r100_gpu_init(struct radeon_device *rdev);
+int r100_gui_wait_for_idle(struct radeon_device *rdev);
+int r100_mc_wait_for_idle(struct radeon_device *rdev);
+void r100_gpu_wait_for_vsync(struct radeon_device *rdev);
+void r100_gpu_wait_for_vsync2(struct radeon_device *rdev);
+int r100_debugfs_mc_info_init(struct radeon_device *rdev);
+
+
+/*
+ * PCI GART
+ */
+void r100_pci_gart_tlb_flush(struct radeon_device *rdev)
+{
+	/* TODO: can we do somethings here ? */
+	/* It seems hw only cache one entry so we should discard this
+	 * entry otherwise if first GPU GART read hit this entry it
+	 * could end up in wrong address. */
+}
+
+int r100_pci_gart_enable(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int r;
+
+	/* Initialize common gart structure */
+	r = radeon_gart_init(rdev);
+	if (r) {
+		return r;
+	}
+	if (rdev->gart.table.ram.ptr == NULL) {
+		rdev->gart.table_size = rdev->gart.num_gpu_pages * 4;
+		r = radeon_gart_table_ram_alloc(rdev);
+		if (r) {
+			return r;
+		}
+	}
+	/* discard memory request outside of configured range */
+	tmp = RREG32(RADEON_AIC_CNTL) | RADEON_DIS_OUT_OF_PCI_GART_ACCESS;
+	WREG32(RADEON_AIC_CNTL, tmp);
+	/* set address range for PCI address translate */
+	WREG32(RADEON_AIC_LO_ADDR, rdev->mc.gtt_location);
+	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+	WREG32(RADEON_AIC_HI_ADDR, tmp);
+	/* Enable bus mastering */
+	tmp = RREG32(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS;
+	WREG32(RADEON_BUS_CNTL, tmp);
+	/* set PCI GART page-table base address */
+	WREG32(RADEON_AIC_PT_BASE, rdev->gart.table_addr);
+	tmp = RREG32(RADEON_AIC_CNTL) | RADEON_PCIGART_TRANSLATE_EN;
+	WREG32(RADEON_AIC_CNTL, tmp);
+	r100_pci_gart_tlb_flush(rdev);
+	rdev->gart.ready = true;
+	return 0;
+}
+
+void r100_pci_gart_disable(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	/* discard memory request outside of configured range */
+	tmp = RREG32(RADEON_AIC_CNTL) | RADEON_DIS_OUT_OF_PCI_GART_ACCESS;
+	WREG32(RADEON_AIC_CNTL, tmp & ~RADEON_PCIGART_TRANSLATE_EN);
+	WREG32(RADEON_AIC_LO_ADDR, 0);
+	WREG32(RADEON_AIC_HI_ADDR, 0);
+}
+
+int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
+{
+	if (i < 0 || i > rdev->gart.num_gpu_pages) {
+		return -EINVAL;
+	}
+	rdev->gart.table.ram.ptr[i] = cpu_to_le32((uint32_t)addr);
+	return 0;
+}
+
+int r100_gart_enable(struct radeon_device *rdev)
+{
+	if (rdev->flags & RADEON_IS_AGP) {
+		r100_pci_gart_disable(rdev);
+		return 0;
+	}
+	return r100_pci_gart_enable(rdev);
+}
+
+
+/*
+ * MC
+ */
+void r100_mc_disable_clients(struct radeon_device *rdev)
+{
+	uint32_t ov0_scale_cntl, crtc_ext_cntl, crtc_gen_cntl, crtc2_gen_cntl;
+
+	/* FIXME: is this function correct for rs100,rs200,rs300 ? */
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	/* stop display and memory access */
+	ov0_scale_cntl = RREG32(RADEON_OV0_SCALE_CNTL);
+	WREG32(RADEON_OV0_SCALE_CNTL, ov0_scale_cntl & ~RADEON_SCALER_ENABLE);
+	crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
+	WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl | RADEON_CRTC_DISPLAY_DIS);
+	crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL);
+
+	r100_gpu_wait_for_vsync(rdev);
+
+	WREG32(RADEON_CRTC_GEN_CNTL,
+	       (crtc_gen_cntl & ~(RADEON_CRTC_CUR_EN | RADEON_CRTC_ICON_EN)) |
+	       RADEON_CRTC_DISP_REQ_EN_B | RADEON_CRTC_EXT_DISP_EN);
+
+	if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
+		crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+
+		r100_gpu_wait_for_vsync2(rdev);
+		WREG32(RADEON_CRTC2_GEN_CNTL,
+		       (crtc2_gen_cntl &
+		        ~(RADEON_CRTC2_CUR_EN | RADEON_CRTC2_ICON_EN)) |
+		       RADEON_CRTC2_DISP_REQ_EN_B);
+	}
+
+	udelay(500);
+}
+
+void r100_mc_setup(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int r;
+
+	r = r100_debugfs_mc_info_init(rdev);
+	if (r) {
+		DRM_ERROR("Failed to register debugfs file for R100 MC !\n");
+	}
+	/* Write VRAM size in case we are limiting it */
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
+	tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32(RADEON_MC_FB_LOCATION, tmp);
+
+	/* Enable bus mastering */
+	tmp = RREG32(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS;
+	WREG32(RADEON_BUS_CNTL, tmp);
+
+	if (rdev->flags & RADEON_IS_AGP) {
+		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+		tmp = REG_SET(RADEON_MC_AGP_TOP, tmp >> 16);
+		tmp |= REG_SET(RADEON_MC_AGP_START, rdev->mc.gtt_location >> 16);
+		WREG32(RADEON_MC_AGP_LOCATION, tmp);
+		WREG32(RADEON_AGP_BASE, rdev->mc.agp_base);
+	} else {
+		WREG32(RADEON_MC_AGP_LOCATION, 0x0FFFFFFF);
+		WREG32(RADEON_AGP_BASE, 0);
+	}
+
+	tmp = RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL;
+	tmp |= (7 << 28);
+	WREG32(RADEON_HOST_PATH_CNTL, tmp | RADEON_HDP_SOFT_RESET | RADEON_HDP_READ_BUFFER_INVALIDATE);
+	(void)RREG32(RADEON_HOST_PATH_CNTL);
+	WREG32(RADEON_HOST_PATH_CNTL, tmp);
+	(void)RREG32(RADEON_HOST_PATH_CNTL);
+}
+
+int r100_mc_init(struct radeon_device *rdev)
+{
+	int r;
+
+	if (r100_debugfs_rbbm_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+	}
+
+	r100_gpu_init(rdev);
+	/* Disable gart which also disable out of gart access */
+	r100_pci_gart_disable(rdev);
+
+	/* Setup GPU memory space */
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	rdev->mc.gtt_location = 0xFFFFFFFFUL;
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r) {
+			printk(KERN_WARNING "[drm] Disabling AGP\n");
+			rdev->flags &= ~RADEON_IS_AGP;
+			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+		} else {
+			rdev->mc.gtt_location = rdev->mc.agp_base;
+		}
+	}
+	r = radeon_mc_setup(rdev);
+	if (r) {
+		return r;
+	}
+
+	r100_mc_disable_clients(rdev);
+	if (r100_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	r100_mc_setup(rdev);
+	return 0;
+}
+
+void r100_mc_fini(struct radeon_device *rdev)
+{
+	r100_pci_gart_disable(rdev);
+	radeon_gart_table_ram_free(rdev);
+	radeon_gart_fini(rdev);
+}
+
+
+/*
+ * Fence emission
+ */
+void r100_fence_ring_emit(struct radeon_device *rdev,
+			  struct radeon_fence *fence)
+{
+	/* Who ever call radeon_fence_emit should call ring_lock and ask
+	 * for enough space (today caller are ib schedule and buffer move) */
+	/* Wait until IDLE & CLEAN */
+	radeon_ring_write(rdev, PACKET0(0x1720, 0));
+	radeon_ring_write(rdev, (1 << 16) | (1 << 17));
+	/* Emit fence sequence & fire IRQ */
+	radeon_ring_write(rdev, PACKET0(rdev->fence_drv.scratch_reg, 0));
+	radeon_ring_write(rdev, fence->seq);
+	radeon_ring_write(rdev, PACKET0(RADEON_GEN_INT_STATUS, 0));
+	radeon_ring_write(rdev, RADEON_SW_INT_FIRE);
+}
+
+
+/*
+ * Writeback
+ */
+int r100_wb_init(struct radeon_device *rdev)
+{
+	int r;
+
+	if (rdev->wb.wb_obj == NULL) {
+		r = radeon_object_create(rdev, NULL, 4096,
+					 true,
+					 RADEON_GEM_DOMAIN_GTT,
+					 false, &rdev->wb.wb_obj);
+		if (r) {
+			DRM_ERROR("radeon: failed to create WB buffer (%d).\n", r);
+			return r;
+		}
+		r = radeon_object_pin(rdev->wb.wb_obj,
+				      RADEON_GEM_DOMAIN_GTT,
+				      &rdev->wb.gpu_addr);
+		if (r) {
+			DRM_ERROR("radeon: failed to pin WB buffer (%d).\n", r);
+			return r;
+		}
+		r = radeon_object_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb);
+		if (r) {
+			DRM_ERROR("radeon: failed to map WB buffer (%d).\n", r);
+			return r;
+		}
+	}
+	WREG32(0x774, rdev->wb.gpu_addr);
+	WREG32(0x70C, rdev->wb.gpu_addr + 1024);
+	WREG32(0x770, 0xff);
+	return 0;
+}
+
+void r100_wb_fini(struct radeon_device *rdev)
+{
+	if (rdev->wb.wb_obj) {
+		radeon_object_kunmap(rdev->wb.wb_obj);
+		radeon_object_unpin(rdev->wb.wb_obj);
+		radeon_object_unref(&rdev->wb.wb_obj);
+		rdev->wb.wb = NULL;
+		rdev->wb.wb_obj = NULL;
+	}
+}
+
+int r100_copy_blit(struct radeon_device *rdev,
+		   uint64_t src_offset,
+		   uint64_t dst_offset,
+		   unsigned num_pages,
+		   struct radeon_fence *fence)
+{
+	uint32_t cur_pages;
+	uint32_t stride_bytes = PAGE_SIZE;
+	uint32_t pitch;
+	uint32_t stride_pixels;
+	unsigned ndw;
+	int num_loops;
+	int r = 0;
+
+	/* radeon limited to 16k stride */
+	stride_bytes &= 0x3fff;
+	/* radeon pitch is /64 */
+	pitch = stride_bytes / 64;
+	stride_pixels = stride_bytes / 4;
+	num_loops = DIV_ROUND_UP(num_pages, 8191);
+
+	/* Ask for enough room for blit + flush + fence */
+	ndw = 64 + (10 * num_loops);
+	r = radeon_ring_lock(rdev, ndw);
+	if (r) {
+		DRM_ERROR("radeon: moving bo (%d) asking for %u dw.\n", r, ndw);
+		return -EINVAL;
+	}
+	while (num_pages > 0) {
+		cur_pages = num_pages;
+		if (cur_pages > 8191) {
+			cur_pages = 8191;
+		}
+		num_pages -= cur_pages;
+
+		/* pages are in Y direction - height
+		   page width in X direction - width */
+		radeon_ring_write(rdev, PACKET3(PACKET3_BITBLT_MULTI, 8));
+		radeon_ring_write(rdev,
+				  RADEON_GMC_SRC_PITCH_OFFSET_CNTL |
+				  RADEON_GMC_DST_PITCH_OFFSET_CNTL |
+				  RADEON_GMC_SRC_CLIPPING |
+				  RADEON_GMC_DST_CLIPPING |
+				  RADEON_GMC_BRUSH_NONE |
+				  (RADEON_COLOR_FORMAT_ARGB8888 << 8) |
+				  RADEON_GMC_SRC_DATATYPE_COLOR |
+				  RADEON_ROP3_S |
+				  RADEON_DP_SRC_SOURCE_MEMORY |
+				  RADEON_GMC_CLR_CMP_CNTL_DIS |
+				  RADEON_GMC_WR_MSK_DIS);
+		radeon_ring_write(rdev, (pitch << 22) | (src_offset >> 10));
+		radeon_ring_write(rdev, (pitch << 22) | (dst_offset >> 10));
+		radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
+		radeon_ring_write(rdev, 0);
+		radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
+		radeon_ring_write(rdev, num_pages);
+		radeon_ring_write(rdev, num_pages);
+		radeon_ring_write(rdev, cur_pages | (stride_pixels << 16));
+	}
+	radeon_ring_write(rdev, PACKET0(RADEON_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, RADEON_RB2D_DC_FLUSH_ALL);
+	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev,
+			  RADEON_WAIT_2D_IDLECLEAN |
+			  RADEON_WAIT_HOST_IDLECLEAN |
+			  RADEON_WAIT_DMA_GUI_IDLE);
+	if (fence) {
+		r = radeon_fence_emit(rdev, fence);
+	}
+	radeon_ring_unlock_commit(rdev);
+	return r;
+}
+
+
+/*
+ * CP
+ */
+void r100_ring_start(struct radeon_device *rdev)
+{
+	int r;
+
+	r = radeon_ring_lock(rdev, 2);
+	if (r) {
+		return;
+	}
+	radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0));
+	radeon_ring_write(rdev,
+			  RADEON_ISYNC_ANY2D_IDLE3D |
+			  RADEON_ISYNC_ANY3D_IDLE2D |
+			  RADEON_ISYNC_WAIT_IDLEGUI |
+			  RADEON_ISYNC_CPSCRATCH_IDLEGUI);
+	radeon_ring_unlock_commit(rdev);
+}
+
+static void r100_cp_load_microcode(struct radeon_device *rdev)
+{
+	int i;
+
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	WREG32(RADEON_CP_ME_RAM_ADDR, 0);
+	if ((rdev->family == CHIP_R100) || (rdev->family == CHIP_RV100) ||
+	    (rdev->family == CHIP_RV200) || (rdev->family == CHIP_RS100) ||
+	    (rdev->family == CHIP_RS200)) {
+		DRM_INFO("Loading R100 Microcode\n");
+		for (i = 0; i < 256; i++) {
+			WREG32(RADEON_CP_ME_RAM_DATAH, R100_cp_microcode[i][1]);
+			WREG32(RADEON_CP_ME_RAM_DATAL, R100_cp_microcode[i][0]);
+		}
+	} else if ((rdev->family == CHIP_R200) ||
+		   (rdev->family == CHIP_RV250) ||
+		   (rdev->family == CHIP_RV280) ||
+		   (rdev->family == CHIP_RS300)) {
+		DRM_INFO("Loading R200 Microcode\n");
+		for (i = 0; i < 256; i++) {
+			WREG32(RADEON_CP_ME_RAM_DATAH, R200_cp_microcode[i][1]);
+			WREG32(RADEON_CP_ME_RAM_DATAL, R200_cp_microcode[i][0]);
+		}
+	} else if ((rdev->family == CHIP_R300) ||
+		   (rdev->family == CHIP_R350) ||
+		   (rdev->family == CHIP_RV350) ||
+		   (rdev->family == CHIP_RV380) ||
+		   (rdev->family == CHIP_RS400) ||
+		   (rdev->family == CHIP_RS480)) {
+		DRM_INFO("Loading R300 Microcode\n");
+		for (i = 0; i < 256; i++) {
+			WREG32(RADEON_CP_ME_RAM_DATAH, R300_cp_microcode[i][1]);
+			WREG32(RADEON_CP_ME_RAM_DATAL, R300_cp_microcode[i][0]);
+		}
+	} else if ((rdev->family == CHIP_R420) ||
+		   (rdev->family == CHIP_R423) ||
+		   (rdev->family == CHIP_RV410)) {
+		DRM_INFO("Loading R400 Microcode\n");
+		for (i = 0; i < 256; i++) {
+			WREG32(RADEON_CP_ME_RAM_DATAH, R420_cp_microcode[i][1]);
+			WREG32(RADEON_CP_ME_RAM_DATAL, R420_cp_microcode[i][0]);
+		}
+	} else if ((rdev->family == CHIP_RS690) ||
+		   (rdev->family == CHIP_RS740)) {
+		DRM_INFO("Loading RS690/RS740 Microcode\n");
+		for (i = 0; i < 256; i++) {
+			WREG32(RADEON_CP_ME_RAM_DATAH, RS690_cp_microcode[i][1]);
+			WREG32(RADEON_CP_ME_RAM_DATAL, RS690_cp_microcode[i][0]);
+		}
+	} else if (rdev->family == CHIP_RS600) {
+		DRM_INFO("Loading RS600 Microcode\n");
+		for (i = 0; i < 256; i++) {
+			WREG32(RADEON_CP_ME_RAM_DATAH, RS600_cp_microcode[i][1]);
+			WREG32(RADEON_CP_ME_RAM_DATAL, RS600_cp_microcode[i][0]);
+		}
+	} else if ((rdev->family == CHIP_RV515) ||
+		   (rdev->family == CHIP_R520) ||
+		   (rdev->family == CHIP_RV530) ||
+		   (rdev->family == CHIP_R580) ||
+		   (rdev->family == CHIP_RV560) ||
+		   (rdev->family == CHIP_RV570)) {
+		DRM_INFO("Loading R500 Microcode\n");
+		for (i = 0; i < 256; i++) {
+			WREG32(RADEON_CP_ME_RAM_DATAH, R520_cp_microcode[i][1]);
+			WREG32(RADEON_CP_ME_RAM_DATAL, R520_cp_microcode[i][0]);
+		}
+	}
+}
+
+int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
+{
+	unsigned rb_bufsz;
+	unsigned rb_blksz;
+	unsigned max_fetch;
+	unsigned pre_write_timer;
+	unsigned pre_write_limit;
+	unsigned indirect2_start;
+	unsigned indirect1_start;
+	uint32_t tmp;
+	int r;
+
+	if (r100_debugfs_cp_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for CP !\n");
+	}
+	/* Reset CP */
+	tmp = RREG32(RADEON_CP_CSQ_STAT);
+	if ((tmp & (1 << 31))) {
+		DRM_INFO("radeon: cp busy (0x%08X) resetting\n", tmp);
+		WREG32(RADEON_CP_CSQ_MODE, 0);
+		WREG32(RADEON_CP_CSQ_CNTL, 0);
+		WREG32(RADEON_RBBM_SOFT_RESET, RADEON_SOFT_RESET_CP);
+		tmp = RREG32(RADEON_RBBM_SOFT_RESET);
+		mdelay(2);
+		WREG32(RADEON_RBBM_SOFT_RESET, 0);
+		tmp = RREG32(RADEON_RBBM_SOFT_RESET);
+		mdelay(2);
+		tmp = RREG32(RADEON_CP_CSQ_STAT);
+		if ((tmp & (1 << 31))) {
+			DRM_INFO("radeon: cp reset failed (0x%08X)\n", tmp);
+		}
+	} else {
+		DRM_INFO("radeon: cp idle (0x%08X)\n", tmp);
+	}
+	/* Align ring size */
+	rb_bufsz = drm_order(ring_size / 8);
+	ring_size = (1 << (rb_bufsz + 1)) * 4;
+	r100_cp_load_microcode(rdev);
+	r = radeon_ring_init(rdev, ring_size);
+	if (r) {
+		return r;
+	}
+	/* Each time the cp read 1024 bytes (16 dword/quadword) update
+	 * the rptr copy in system ram */
+	rb_blksz = 9;
+	/* cp will read 128bytes at a time (4 dwords) */
+	max_fetch = 1;
+	rdev->cp.align_mask = 16 - 1;
+	/* Write to CP_RB_WPTR will be delayed for pre_write_timer clocks */
+	pre_write_timer = 64;
+	/* Force CP_RB_WPTR write if written more than one time before the
+	 * delay expire
+	 */
+	pre_write_limit = 0;
+	/* Setup the cp cache like this (cache size is 96 dwords) :
+	 *	RING		0  to 15
+	 *	INDIRECT1	16 to 79
+	 *	INDIRECT2	80 to 95
+	 * So ring cache size is 16dwords (> (2 * max_fetch = 2 * 4dwords))
+	 *    indirect1 cache size is 64dwords (> (2 * max_fetch = 2 * 4dwords))
+	 *    indirect2 cache size is 16dwords (> (2 * max_fetch = 2 * 4dwords))
+	 * Idea being that most of the gpu cmd will be through indirect1 buffer
+	 * so it gets the bigger cache.
+	 */
+	indirect2_start = 80;
+	indirect1_start = 16;
+	/* cp setup */
+	WREG32(0x718, pre_write_timer | (pre_write_limit << 28));
+	WREG32(RADEON_CP_RB_CNTL,
+	       REG_SET(RADEON_RB_BUFSZ, rb_bufsz) |
+	       REG_SET(RADEON_RB_BLKSZ, rb_blksz) |
+	       REG_SET(RADEON_MAX_FETCH, max_fetch) |
+	       RADEON_RB_NO_UPDATE);
+	/* Set ring address */
+	DRM_INFO("radeon: ring at 0x%016lX\n", (unsigned long)rdev->cp.gpu_addr);
+	WREG32(RADEON_CP_RB_BASE, rdev->cp.gpu_addr);
+	/* Force read & write ptr to 0 */
+	tmp = RREG32(RADEON_CP_RB_CNTL);
+	WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA);
+	WREG32(RADEON_CP_RB_RPTR_WR, 0);
+	WREG32(RADEON_CP_RB_WPTR, 0);
+	WREG32(RADEON_CP_RB_CNTL, tmp);
+	udelay(10);
+	rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR);
+	rdev->cp.wptr = RREG32(RADEON_CP_RB_WPTR);
+	/* Set cp mode to bus mastering & enable cp*/
+	WREG32(RADEON_CP_CSQ_MODE,
+	       REG_SET(RADEON_INDIRECT2_START, indirect2_start) |
+	       REG_SET(RADEON_INDIRECT1_START, indirect1_start));
+	WREG32(0x718, 0);
+	WREG32(0x744, 0x00004D4D);
+	WREG32(RADEON_CP_CSQ_CNTL, RADEON_CSQ_PRIBM_INDBM);
+	radeon_ring_start(rdev);
+	r = radeon_ring_test(rdev);
+	if (r) {
+		DRM_ERROR("radeon: cp isn't working (%d).\n", r);
+		return r;
+	}
+	rdev->cp.ready = true;
+	return 0;
+}
+
+void r100_cp_fini(struct radeon_device *rdev)
+{
+	/* Disable ring */
+	rdev->cp.ready = false;
+	WREG32(RADEON_CP_CSQ_CNTL, 0);
+	radeon_ring_fini(rdev);
+	DRM_INFO("radeon: cp finalized\n");
+}
+
+void r100_cp_disable(struct radeon_device *rdev)
+{
+	/* Disable ring */
+	rdev->cp.ready = false;
+	WREG32(RADEON_CP_CSQ_MODE, 0);
+	WREG32(RADEON_CP_CSQ_CNTL, 0);
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+}
+
+int r100_cp_reset(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	bool reinit_cp;
+	int i;
+
+	reinit_cp = rdev->cp.ready;
+	rdev->cp.ready = false;
+	WREG32(RADEON_CP_CSQ_MODE, 0);
+	WREG32(RADEON_CP_CSQ_CNTL, 0);
+	WREG32(RADEON_RBBM_SOFT_RESET, RADEON_SOFT_RESET_CP);
+	(void)RREG32(RADEON_RBBM_SOFT_RESET);
+	udelay(200);
+	WREG32(RADEON_RBBM_SOFT_RESET, 0);
+	/* Wait to prevent race in RBBM_STATUS */
+	mdelay(1);
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (!(tmp & (1 << 16))) {
+			DRM_INFO("CP reset succeed (RBBM_STATUS=0x%08X)\n",
+				 tmp);
+			if (reinit_cp) {
+				return r100_cp_init(rdev, rdev->cp.ring_size);
+			}
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	tmp = RREG32(RADEON_RBBM_STATUS);
+	DRM_ERROR("Failed to reset CP (RBBM_STATUS=0x%08X)!\n", tmp);
+	return -1;
+}
+
+
+/*
+ * CS functions
+ */
+int r100_cs_parse_packet0(struct radeon_cs_parser *p,
+			  struct radeon_cs_packet *pkt,
+			  unsigned *auth, unsigned n,
+			  radeon_packet0_check_t check)
+{
+	unsigned reg;
+	unsigned i, j, m;
+	unsigned idx;
+	int r;
+
+	idx = pkt->idx + 1;
+	reg = pkt->reg;
+	if (pkt->one_reg_wr) {
+		if ((reg >> 7) > n) {
+			return -EINVAL;
+		}
+	} else {
+		if (((reg + (pkt->count << 2)) >> 7) > n) {
+			return -EINVAL;
+		}
+	}
+	for (i = 0; i <= pkt->count; i++, idx++) {
+		j = (reg >> 7);
+		m = 1 << ((reg >> 2) & 31);
+		if (auth[j] & m) {
+			r = check(p, pkt, idx, reg);
+			if (r) {
+				return r;
+			}
+		}
+		if (pkt->one_reg_wr) {
+			if (!(auth[j] & m)) {
+				break;
+			}
+		} else {
+			reg += 4;
+		}
+	}
+	return 0;
+}
+
+int r100_cs_parse_packet3(struct radeon_cs_parser *p,
+			  struct radeon_cs_packet *pkt,
+			  unsigned *auth, unsigned n,
+			  radeon_packet3_check_t check)
+{
+	unsigned i, m;
+
+	if ((pkt->opcode >> 5) > n) {
+		return -EINVAL;
+	}
+	i = pkt->opcode >> 5;
+	m = 1 << (pkt->opcode & 31);
+	if (auth[i] & m) {
+		return check(p, pkt);
+	}
+	return 0;
+}
+
+void r100_cs_dump_packet(struct radeon_cs_parser *p,
+			 struct radeon_cs_packet *pkt)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	volatile uint32_t *ib;
+	unsigned i;
+	unsigned idx;
+
+	ib = p->ib->ptr;
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	idx = pkt->idx;
+	for (i = 0; i <= (pkt->count + 1); i++, idx++) {
+		DRM_INFO("ib[%d]=0x%08X\n", idx, ib[idx]);
+	}
+}
+
+/**
+ * r100_cs_packet_parse() - parse cp packet and point ib index to next packet
+ * @parser:	parser structure holding parsing context.
+ * @pkt:	where to store packet informations
+ *
+ * Assume that chunk_ib_index is properly set. Will return -EINVAL
+ * if packet is bigger than remaining ib size. or if packets is unknown.
+ **/
+int r100_cs_packet_parse(struct radeon_cs_parser *p,
+			 struct radeon_cs_packet *pkt,
+			 unsigned idx)
+{
+	struct radeon_cs_chunk *ib_chunk = &p->chunks[p->chunk_ib_idx];
+	uint32_t header = ib_chunk->kdata[idx];
+
+	if (idx >= ib_chunk->length_dw) {
+		DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
+			  idx, ib_chunk->length_dw);
+		return -EINVAL;
+	}
+	pkt->idx = idx;
+	pkt->type = CP_PACKET_GET_TYPE(header);
+	pkt->count = CP_PACKET_GET_COUNT(header);
+	switch (pkt->type) {
+	case PACKET_TYPE0:
+		pkt->reg = CP_PACKET0_GET_REG(header);
+		pkt->one_reg_wr = CP_PACKET0_GET_ONE_REG_WR(header);
+		break;
+	case PACKET_TYPE3:
+		pkt->opcode = CP_PACKET3_GET_OPCODE(header);
+		break;
+	case PACKET_TYPE2:
+		pkt->count = -1;
+		break;
+	default:
+		DRM_ERROR("Unknown packet type %d at %d !\n", pkt->type, idx);
+		return -EINVAL;
+	}
+	if ((pkt->count + 1 + pkt->idx) >= ib_chunk->length_dw) {
+		DRM_ERROR("Packet (%d:%d:%d) end after CS buffer (%d) !\n",
+			  pkt->idx, pkt->type, pkt->count, ib_chunk->length_dw);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * r100_cs_packet_next_reloc() - parse next packet which should be reloc packet3
+ * @parser:		parser structure holding parsing context.
+ * @data:		pointer to relocation data
+ * @offset_start:	starting offset
+ * @offset_mask:	offset mask (to align start offset on)
+ * @reloc:		reloc informations
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
+			      struct radeon_cs_reloc **cs_reloc)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	struct radeon_cs_chunk *relocs_chunk;
+	struct radeon_cs_packet p3reloc;
+	unsigned idx;
+	int r;
+
+	if (p->chunk_relocs_idx == -1) {
+		DRM_ERROR("No relocation chunk !\n");
+		return -EINVAL;
+	}
+	*cs_reloc = NULL;
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
+	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+	if (r) {
+		return r;
+	}
+	p->idx += p3reloc.count + 2;
+	if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+		DRM_ERROR("No packet3 for relocation for packet at %d.\n",
+			  p3reloc.idx);
+		r100_cs_dump_packet(p, &p3reloc);
+		return -EINVAL;
+	}
+	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	if (idx >= relocs_chunk->length_dw) {
+		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
+			  idx, relocs_chunk->length_dw);
+		r100_cs_dump_packet(p, &p3reloc);
+		return -EINVAL;
+	}
+	/* FIXME: we assume reloc size is 4 dwords */
+	*cs_reloc = p->relocs_ptr[(idx / 4)];
+	return 0;
+}
+
+static int r100_packet0_check(struct radeon_cs_parser *p,
+			      struct radeon_cs_packet *pkt)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	struct radeon_cs_reloc *reloc;
+	volatile uint32_t *ib;
+	uint32_t tmp;
+	unsigned reg;
+	unsigned i;
+	unsigned idx;
+	bool onereg;
+	int r;
+
+	ib = p->ib->ptr;
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	idx = pkt->idx + 1;
+	reg = pkt->reg;
+	onereg = false;
+	if (CP_PACKET0_GET_ONE_REG_WR(ib_chunk->kdata[pkt->idx])) {
+		onereg = true;
+	}
+	for (i = 0; i <= pkt->count; i++, idx++, reg += 4) {
+		switch (reg) {
+		/* FIXME: only allow PACKET3 blit? easier to check for out of
+		 * range access */
+		case RADEON_DST_PITCH_OFFSET:
+		case RADEON_SRC_PITCH_OFFSET:
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			tmp = ib_chunk->kdata[idx] & 0x003fffff;
+			tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
+			ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+			break;
+		case RADEON_RB3D_DEPTHOFFSET:
+		case RADEON_RB3D_COLOROFFSET:
+		case R300_RB3D_COLOROFFSET0:
+		case R300_ZB_DEPTHOFFSET:
+		case R200_PP_TXOFFSET_0:
+		case R200_PP_TXOFFSET_1:
+		case R200_PP_TXOFFSET_2:
+		case R200_PP_TXOFFSET_3:
+		case R200_PP_TXOFFSET_4:
+		case R200_PP_TXOFFSET_5:
+		case RADEON_PP_TXOFFSET_0:
+		case RADEON_PP_TXOFFSET_1:
+		case RADEON_PP_TXOFFSET_2:
+		case R300_TX_OFFSET_0:
+		case R300_TX_OFFSET_0+4:
+		case R300_TX_OFFSET_0+8:
+		case R300_TX_OFFSET_0+12:
+		case R300_TX_OFFSET_0+16:
+		case R300_TX_OFFSET_0+20:
+		case R300_TX_OFFSET_0+24:
+		case R300_TX_OFFSET_0+28:
+		case R300_TX_OFFSET_0+32:
+		case R300_TX_OFFSET_0+36:
+		case R300_TX_OFFSET_0+40:
+		case R300_TX_OFFSET_0+44:
+		case R300_TX_OFFSET_0+48:
+		case R300_TX_OFFSET_0+52:
+		case R300_TX_OFFSET_0+56:
+		case R300_TX_OFFSET_0+60:
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+			break;
+		default:
+			/* FIXME: we don't want to allow anyothers packet */
+			break;
+		}
+		if (onereg) {
+			/* FIXME: forbid onereg write to register on relocate */
+			break;
+		}
+	}
+	return 0;
+}
+
+static int r100_packet3_check(struct radeon_cs_parser *p,
+			      struct radeon_cs_packet *pkt)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	struct radeon_cs_reloc *reloc;
+	unsigned idx;
+	unsigned i, c;
+	volatile uint32_t *ib;
+	int r;
+
+	ib = p->ib->ptr;
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	idx = pkt->idx + 1;
+	switch (pkt->opcode) {
+	case PACKET3_3D_LOAD_VBPNTR:
+		c = ib_chunk->kdata[idx++];
+		for (i = 0; i < (c - 1); i += 2, idx += 3) {
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
+		}
+		if (c & 1) {
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		}
+		break;
+	case PACKET3_INDX_BUFFER:
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n", pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		break;
+	case 0x23:
+		/* FIXME: cleanup */
+		/* 3D_RNDR_GEN_INDX_PRIM on r100/r200 */
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n", pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		break;
+	case PACKET3_3D_DRAW_IMMD:
+		/* triggers drawing using in-packet vertex data */
+	case PACKET3_3D_DRAW_IMMD_2:
+		/* triggers drawing using in-packet vertex data */
+	case PACKET3_3D_DRAW_VBUF_2:
+		/* triggers drawing of vertex buffers setup elsewhere */
+	case PACKET3_3D_DRAW_INDX_2:
+		/* triggers drawing using indices to vertex buffer */
+	case PACKET3_3D_DRAW_VBUF:
+		/* triggers drawing of vertex buffers setup elsewhere */
+	case PACKET3_3D_DRAW_INDX:
+		/* triggers drawing using indices to vertex buffer */
+	case PACKET3_NOP:
+		break;
+	default:
+		DRM_ERROR("Packet3 opcode %x not supported\n", pkt->opcode);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int r100_cs_parse(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_packet pkt;
+	int r;
+
+	do {
+		r = r100_cs_packet_parse(p, &pkt, p->idx);
+		if (r) {
+			return r;
+		}
+		p->idx += pkt.count + 2;
+		switch (pkt.type) {
+		case PACKET_TYPE0:
+			r = r100_packet0_check(p, &pkt);
+			break;
+		case PACKET_TYPE2:
+			break;
+		case PACKET_TYPE3:
+			r = r100_packet3_check(p, &pkt);
+			break;
+		default:
+			DRM_ERROR("Unknown packet type %d !\n",
+					pkt.type);
+			return -EINVAL;
+		}
+		if (r) {
+			return r;
+		}
+	} while (p->idx < p->chunks[p->chunk_ib_idx].length_dw);
+	return 0;
+}
+
+
+/*
+ * Global GPU functions
+ */
+void r100_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+
+	if (rdev->family == CHIP_RV200 || rdev->family == CHIP_RS200) {
+		rdev->pll_errata |= CHIP_ERRATA_PLL_DUMMYREADS;
+	}
+
+	if (rdev->family == CHIP_RV100 ||
+	    rdev->family == CHIP_RS100 ||
+	    rdev->family == CHIP_RS200) {
+		rdev->pll_errata |= CHIP_ERRATA_PLL_DELAY;
+	}
+}
+
+/* Wait for vertical sync on primary CRTC */
+void r100_gpu_wait_for_vsync(struct radeon_device *rdev)
+{
+	uint32_t crtc_gen_cntl, tmp;
+	int i;
+
+	crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL);
+	if ((crtc_gen_cntl & RADEON_CRTC_DISP_REQ_EN_B) ||
+	    !(crtc_gen_cntl & RADEON_CRTC_EN)) {
+		return;
+	}
+	/* Clear the CRTC_VBLANK_SAVE bit */
+	WREG32(RADEON_CRTC_STATUS, RADEON_CRTC_VBLANK_SAVE_CLEAR);
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(RADEON_CRTC_STATUS);
+		if (tmp & RADEON_CRTC_VBLANK_SAVE) {
+			return;
+		}
+		DRM_UDELAY(1);
+	}
+}
+
+/* Wait for vertical sync on secondary CRTC */
+void r100_gpu_wait_for_vsync2(struct radeon_device *rdev)
+{
+	uint32_t crtc2_gen_cntl, tmp;
+	int i;
+
+	crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+	if ((crtc2_gen_cntl & RADEON_CRTC2_DISP_REQ_EN_B) ||
+	    !(crtc2_gen_cntl & RADEON_CRTC2_EN))
+		return;
+
+	/* Clear the CRTC_VBLANK_SAVE bit */
+	WREG32(RADEON_CRTC2_STATUS, RADEON_CRTC2_VBLANK_SAVE_CLEAR);
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(RADEON_CRTC2_STATUS);
+		if (tmp & RADEON_CRTC2_VBLANK_SAVE) {
+			return;
+		}
+		DRM_UDELAY(1);
+	}
+}
+
+int r100_rbbm_fifo_wait_for_entry(struct radeon_device *rdev, unsigned n)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(RADEON_RBBM_STATUS) & RADEON_RBBM_FIFOCNT_MASK;
+		if (tmp >= n) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
+int r100_gui_wait_for_idle(struct radeon_device *rdev)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	if (r100_rbbm_fifo_wait_for_entry(rdev, 64)) {
+		printk(KERN_WARNING "radeon: wait for empty RBBM fifo failed !"
+		       " Bad things might happen.\n");
+	}
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (!(tmp & (1 << 31))) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
+int r100_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		/* read MC_STATUS */
+		tmp = RREG32(0x0150);
+		if (tmp & (1 << 2)) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
+void r100_gpu_init(struct radeon_device *rdev)
+{
+	/* TODO: anythings to do here ? pipes ? */
+	r100_hdp_reset(rdev);
+}
+
+void r100_hdp_reset(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	tmp = RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL;
+	tmp |= (7 << 28);
+	WREG32(RADEON_HOST_PATH_CNTL, tmp | RADEON_HDP_SOFT_RESET | RADEON_HDP_READ_BUFFER_INVALIDATE);
+	(void)RREG32(RADEON_HOST_PATH_CNTL);
+	udelay(200);
+	WREG32(RADEON_RBBM_SOFT_RESET, 0);
+	WREG32(RADEON_HOST_PATH_CNTL, tmp);
+	(void)RREG32(RADEON_HOST_PATH_CNTL);
+}
+
+int r100_rb2d_reset(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int i;
+
+	WREG32(RADEON_RBBM_SOFT_RESET, RADEON_SOFT_RESET_E2);
+	(void)RREG32(RADEON_RBBM_SOFT_RESET);
+	udelay(200);
+	WREG32(RADEON_RBBM_SOFT_RESET, 0);
+	/* Wait to prevent race in RBBM_STATUS */
+	mdelay(1);
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (!(tmp & (1 << 26))) {
+			DRM_INFO("RB2D reset succeed (RBBM_STATUS=0x%08X)\n",
+				 tmp);
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	tmp = RREG32(RADEON_RBBM_STATUS);
+	DRM_ERROR("Failed to reset RB2D (RBBM_STATUS=0x%08X)!\n", tmp);
+	return -1;
+}
+
+int r100_gpu_reset(struct radeon_device *rdev)
+{
+	uint32_t status;
+
+	/* reset order likely matter */
+	status = RREG32(RADEON_RBBM_STATUS);
+	/* reset HDP */
+	r100_hdp_reset(rdev);
+	/* reset rb2d */
+	if (status & ((1 << 17) | (1 << 18) | (1 << 27))) {
+		r100_rb2d_reset(rdev);
+	}
+	/* TODO: reset 3D engine */
+	/* reset CP */
+	status = RREG32(RADEON_RBBM_STATUS);
+	if (status & (1 << 16)) {
+		r100_cp_reset(rdev);
+	}
+	/* Check if GPU is idle */
+	status = RREG32(RADEON_RBBM_STATUS);
+	if (status & (1 << 31)) {
+		DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status);
+		return -1;
+	}
+	DRM_INFO("GPU reset succeed (RBBM_STATUS=0x%08X)\n", status);
+	return 0;
+}
+
+
+/*
+ * VRAM info
+ */
+static void r100_vram_get_type(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	rdev->mc.vram_is_ddr = false;
+	if (rdev->flags & RADEON_IS_IGP)
+		rdev->mc.vram_is_ddr = true;
+	else if (RREG32(RADEON_MEM_SDRAM_MODE_REG) & RADEON_MEM_CFG_TYPE_DDR)
+		rdev->mc.vram_is_ddr = true;
+	if ((rdev->family == CHIP_RV100) ||
+	    (rdev->family == CHIP_RS100) ||
+	    (rdev->family == CHIP_RS200)) {
+		tmp = RREG32(RADEON_MEM_CNTL);
+		if (tmp & RV100_HALF_MODE) {
+			rdev->mc.vram_width = 32;
+		} else {
+			rdev->mc.vram_width = 64;
+		}
+		if (rdev->flags & RADEON_SINGLE_CRTC) {
+			rdev->mc.vram_width /= 4;
+			rdev->mc.vram_is_ddr = true;
+		}
+	} else if (rdev->family <= CHIP_RV280) {
+		tmp = RREG32(RADEON_MEM_CNTL);
+		if (tmp & RADEON_MEM_NUM_CHANNELS_MASK) {
+			rdev->mc.vram_width = 128;
+		} else {
+			rdev->mc.vram_width = 64;
+		}
+	} else {
+		/* newer IGPs */
+		rdev->mc.vram_width = 128;
+	}
+}
+
+void r100_vram_info(struct radeon_device *rdev)
+{
+	r100_vram_get_type(rdev);
+
+	if (rdev->flags & RADEON_IS_IGP) {
+		uint32_t tom;
+		/* read NB_TOM to get the amount of ram stolen for the GPU */
+		tom = RREG32(RADEON_NB_TOM);
+		rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
+		WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+	} else {
+		rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+		/* Some production boards of m6 will report 0
+		 * if it's 8 MB
+		 */
+		if (rdev->mc.vram_size == 0) {
+			rdev->mc.vram_size = 8192 * 1024;
+			WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+		}
+	}
+
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	if (rdev->mc.aper_size > rdev->mc.vram_size) {
+		/* Why does some hw doesn't have CONFIG_MEMSIZE properly
+		 * setup ? */
+		rdev->mc.vram_size = rdev->mc.aper_size;
+		WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+	}
+}
+
+
+/*
+ * Indirect registers accessor
+ */
+void r100_pll_errata_after_index(struct radeon_device *rdev)
+{
+	if (!(rdev->pll_errata & CHIP_ERRATA_PLL_DUMMYREADS)) {
+		return;
+	}
+	(void)RREG32(RADEON_CLOCK_CNTL_DATA);
+	(void)RREG32(RADEON_CRTC_GEN_CNTL);
+}
+
+static void r100_pll_errata_after_data(struct radeon_device *rdev)
+{
+	/* This workarounds is necessary on RV100, RS100 and RS200 chips
+	 * or the chip could hang on a subsequent access
+	 */
+	if (rdev->pll_errata & CHIP_ERRATA_PLL_DELAY) {
+		udelay(5000);
+	}
+
+	/* This function is required to workaround a hardware bug in some (all?)
+	 * revisions of the R300.  This workaround should be called after every
+	 * CLOCK_CNTL_INDEX register access.  If not, register reads afterward
+	 * may not be correct.
+	 */
+	if (rdev->pll_errata & CHIP_ERRATA_R300_CG) {
+		uint32_t save, tmp;
+
+		save = RREG32(RADEON_CLOCK_CNTL_INDEX);
+		tmp = save & ~(0x3f | RADEON_PLL_WR_EN);
+		WREG32(RADEON_CLOCK_CNTL_INDEX, tmp);
+		tmp = RREG32(RADEON_CLOCK_CNTL_DATA);
+		WREG32(RADEON_CLOCK_CNTL_INDEX, save);
+	}
+}
+
+uint32_t r100_pll_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t data;
+
+	WREG8(RADEON_CLOCK_CNTL_INDEX, reg & 0x3f);
+	r100_pll_errata_after_index(rdev);
+	data = RREG32(RADEON_CLOCK_CNTL_DATA);
+	r100_pll_errata_after_data(rdev);
+	return data;
+}
+
+void r100_pll_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG8(RADEON_CLOCK_CNTL_INDEX, ((reg & 0x3f) | RADEON_PLL_WR_EN));
+	r100_pll_errata_after_index(rdev);
+	WREG32(RADEON_CLOCK_CNTL_DATA, v);
+	r100_pll_errata_after_data(rdev);
+}
+
+uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	if (reg < 0x10000)
+		return readl(((void __iomem *)rdev->rmmio) + reg);
+	else {
+		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+		return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+	}
+}
+
+void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	if (reg < 0x10000)
+		writel(v, ((void __iomem *)rdev->rmmio) + reg);
+	else {
+		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
+		writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA);
+	}
+}
+
+/*
+ * Debugfs info
+ */
+#if defined(CONFIG_DEBUG_FS)
+static int r100_debugfs_rbbm_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t reg, value;
+	unsigned i;
+
+	seq_printf(m, "RBBM_STATUS 0x%08x\n", RREG32(RADEON_RBBM_STATUS));
+	seq_printf(m, "RBBM_CMDFIFO_STAT 0x%08x\n", RREG32(0xE7C));
+	seq_printf(m, "CP_STAT 0x%08x\n", RREG32(RADEON_CP_STAT));
+	for (i = 0; i < 64; i++) {
+		WREG32(RADEON_RBBM_CMDFIFO_ADDR, i | 0x100);
+		reg = (RREG32(RADEON_RBBM_CMDFIFO_DATA) - 1) >> 2;
+		WREG32(RADEON_RBBM_CMDFIFO_ADDR, i);
+		value = RREG32(RADEON_RBBM_CMDFIFO_DATA);
+		seq_printf(m, "[0x%03X] 0x%04X=0x%08X\n", i, reg, value);
+	}
+	return 0;
+}
+
+static int r100_debugfs_cp_ring_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t rdp, wdp;
+	unsigned count, i, j;
+
+	radeon_ring_free_size(rdev);
+	rdp = RREG32(RADEON_CP_RB_RPTR);
+	wdp = RREG32(RADEON_CP_RB_WPTR);
+	count = (rdp + rdev->cp.ring_size - wdp) & rdev->cp.ptr_mask;
+	seq_printf(m, "CP_STAT 0x%08x\n", RREG32(RADEON_CP_STAT));
+	seq_printf(m, "CP_RB_WPTR 0x%08x\n", wdp);
+	seq_printf(m, "CP_RB_RPTR 0x%08x\n", rdp);
+	seq_printf(m, "%u free dwords in ring\n", rdev->cp.ring_free_dw);
+	seq_printf(m, "%u dwords in ring\n", count);
+	for (j = 0; j <= count; j++) {
+		i = (rdp + j) & rdev->cp.ptr_mask;
+		seq_printf(m, "r[%04d]=0x%08x\n", i, rdev->cp.ring[i]);
+	}
+	return 0;
+}
+
+
+static int r100_debugfs_cp_csq_fifo(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t csq_stat, csq2_stat, tmp;
+	unsigned r_rptr, r_wptr, ib1_rptr, ib1_wptr, ib2_rptr, ib2_wptr;
+	unsigned i;
+
+	seq_printf(m, "CP_STAT 0x%08x\n", RREG32(RADEON_CP_STAT));
+	seq_printf(m, "CP_CSQ_MODE 0x%08x\n", RREG32(RADEON_CP_CSQ_MODE));
+	csq_stat = RREG32(RADEON_CP_CSQ_STAT);
+	csq2_stat = RREG32(RADEON_CP_CSQ2_STAT);
+	r_rptr = (csq_stat >> 0) & 0x3ff;
+	r_wptr = (csq_stat >> 10) & 0x3ff;
+	ib1_rptr = (csq_stat >> 20) & 0x3ff;
+	ib1_wptr = (csq2_stat >> 0) & 0x3ff;
+	ib2_rptr = (csq2_stat >> 10) & 0x3ff;
+	ib2_wptr = (csq2_stat >> 20) & 0x3ff;
+	seq_printf(m, "CP_CSQ_STAT 0x%08x\n", csq_stat);
+	seq_printf(m, "CP_CSQ2_STAT 0x%08x\n", csq2_stat);
+	seq_printf(m, "Ring rptr %u\n", r_rptr);
+	seq_printf(m, "Ring wptr %u\n", r_wptr);
+	seq_printf(m, "Indirect1 rptr %u\n", ib1_rptr);
+	seq_printf(m, "Indirect1 wptr %u\n", ib1_wptr);
+	seq_printf(m, "Indirect2 rptr %u\n", ib2_rptr);
+	seq_printf(m, "Indirect2 wptr %u\n", ib2_wptr);
+	/* FIXME: 0, 128, 640 depends on fifo setup see cp_init_kms
+	 * 128 = indirect1_start * 8 & 640 = indirect2_start * 8 */
+	seq_printf(m, "Ring fifo:\n");
+	for (i = 0; i < 256; i++) {
+		WREG32(RADEON_CP_CSQ_ADDR, i << 2);
+		tmp = RREG32(RADEON_CP_CSQ_DATA);
+		seq_printf(m, "rfifo[%04d]=0x%08X\n", i, tmp);
+	}
+	seq_printf(m, "Indirect1 fifo:\n");
+	for (i = 256; i <= 512; i++) {
+		WREG32(RADEON_CP_CSQ_ADDR, i << 2);
+		tmp = RREG32(RADEON_CP_CSQ_DATA);
+		seq_printf(m, "ib1fifo[%04d]=0x%08X\n", i, tmp);
+	}
+	seq_printf(m, "Indirect2 fifo:\n");
+	for (i = 640; i < ib1_wptr; i++) {
+		WREG32(RADEON_CP_CSQ_ADDR, i << 2);
+		tmp = RREG32(RADEON_CP_CSQ_DATA);
+		seq_printf(m, "ib2fifo[%04d]=0x%08X\n", i, tmp);
+	}
+	return 0;
+}
+
+static int r100_debugfs_mc_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = RREG32(RADEON_CONFIG_MEMSIZE);
+	seq_printf(m, "CONFIG_MEMSIZE 0x%08x\n", tmp);
+	tmp = RREG32(RADEON_MC_FB_LOCATION);
+	seq_printf(m, "MC_FB_LOCATION 0x%08x\n", tmp);
+	tmp = RREG32(RADEON_BUS_CNTL);
+	seq_printf(m, "BUS_CNTL 0x%08x\n", tmp);
+	tmp = RREG32(RADEON_MC_AGP_LOCATION);
+	seq_printf(m, "MC_AGP_LOCATION 0x%08x\n", tmp);
+	tmp = RREG32(RADEON_AGP_BASE);
+	seq_printf(m, "AGP_BASE 0x%08x\n", tmp);
+	tmp = RREG32(RADEON_HOST_PATH_CNTL);
+	seq_printf(m, "HOST_PATH_CNTL 0x%08x\n", tmp);
+	tmp = RREG32(0x01D0);
+	seq_printf(m, "AIC_CTRL 0x%08x\n", tmp);
+	tmp = RREG32(RADEON_AIC_LO_ADDR);
+	seq_printf(m, "AIC_LO_ADDR 0x%08x\n", tmp);
+	tmp = RREG32(RADEON_AIC_HI_ADDR);
+	seq_printf(m, "AIC_HI_ADDR 0x%08x\n", tmp);
+	tmp = RREG32(0x01E4);
+	seq_printf(m, "AIC_TLB_ADDR 0x%08x\n", tmp);
+	return 0;
+}
+
+static struct drm_info_list r100_debugfs_rbbm_list[] = {
+	{"r100_rbbm_info", r100_debugfs_rbbm_info, 0, NULL},
+};
+
+static struct drm_info_list r100_debugfs_cp_list[] = {
+	{"r100_cp_ring_info", r100_debugfs_cp_ring_info, 0, NULL},
+	{"r100_cp_csq_fifo", r100_debugfs_cp_csq_fifo, 0, NULL},
+};
+
+static struct drm_info_list r100_debugfs_mc_info_list[] = {
+	{"r100_mc_info", r100_debugfs_mc_info, 0, NULL},
+};
+#endif
+
+int r100_debugfs_rbbm_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, r100_debugfs_rbbm_list, 1);
+#else
+	return 0;
+#endif
+}
+
+int r100_debugfs_cp_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, r100_debugfs_cp_list, 2);
+#else
+	return 0;
+#endif
+}
+
+int r100_debugfs_mc_info_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, r100_debugfs_mc_info_list, 1);
+#else
+	return 0;
+#endif
+}
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
new file mode 100644
index 00000000000..f5870a099d4
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -0,0 +1,1116 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include <linux/seq_file.h>
+#include "drmP.h"
+#include "drm.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* r300,r350,rv350,rv370,rv380 depends on : */
+void r100_hdp_reset(struct radeon_device *rdev);
+int r100_cp_reset(struct radeon_device *rdev);
+int r100_rb2d_reset(struct radeon_device *rdev);
+int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
+int r100_pci_gart_enable(struct radeon_device *rdev);
+void r100_pci_gart_disable(struct radeon_device *rdev);
+void r100_mc_setup(struct radeon_device *rdev);
+void r100_mc_disable_clients(struct radeon_device *rdev);
+int r100_gui_wait_for_idle(struct radeon_device *rdev);
+int r100_cs_packet_parse(struct radeon_cs_parser *p,
+			 struct radeon_cs_packet *pkt,
+			 unsigned idx);
+int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
+			      struct radeon_cs_reloc **cs_reloc);
+int r100_cs_parse_packet0(struct radeon_cs_parser *p,
+			  struct radeon_cs_packet *pkt,
+			  unsigned *auth, unsigned n,
+			  radeon_packet0_check_t check);
+int r100_cs_parse_packet3(struct radeon_cs_parser *p,
+			  struct radeon_cs_packet *pkt,
+			  unsigned *auth, unsigned n,
+			  radeon_packet3_check_t check);
+void r100_cs_dump_packet(struct radeon_cs_parser *p,
+			 struct radeon_cs_packet *pkt);
+
+/* This files gather functions specifics to:
+ * r300,r350,rv350,rv370,rv380
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+void r300_gpu_init(struct radeon_device *rdev);
+int r300_mc_wait_for_idle(struct radeon_device *rdev);
+int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
+
+
+/*
+ * rv370,rv380 PCIE GART
+ */
+void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int i;
+
+	/* Workaround HW bug do flush 2 times */
+	for (i = 0; i < 2; i++) {
+		tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
+		WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp | RADEON_PCIE_TX_GART_INVALIDATE_TLB);
+		(void)RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
+		WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp);
+		mb();
+	}
+}
+
+int rv370_pcie_gart_enable(struct radeon_device *rdev)
+{
+	uint32_t table_addr;
+	uint32_t tmp;
+	int r;
+
+	/* Initialize common gart structure */
+	r = radeon_gart_init(rdev);
+	if (r) {
+		return r;
+	}
+	r = rv370_debugfs_pcie_gart_info_init(rdev);
+	if (r) {
+		DRM_ERROR("Failed to register debugfs file for PCIE gart !\n");
+	}
+	rdev->gart.table_size = rdev->gart.num_gpu_pages * 4;
+	r = radeon_gart_table_vram_alloc(rdev);
+	if (r) {
+		return r;
+	}
+	/* discard memory request outside of configured range */
+	tmp = RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD;
+	WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp);
+	WREG32_PCIE(RADEON_PCIE_TX_GART_START_LO, rdev->mc.gtt_location);
+	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 4096;
+	WREG32_PCIE(RADEON_PCIE_TX_GART_END_LO, tmp);
+	WREG32_PCIE(RADEON_PCIE_TX_GART_START_HI, 0);
+	WREG32_PCIE(RADEON_PCIE_TX_GART_END_HI, 0);
+	table_addr = rdev->gart.table_addr;
+	WREG32_PCIE(RADEON_PCIE_TX_GART_BASE, table_addr);
+	/* FIXME: setup default page */
+	WREG32_PCIE(RADEON_PCIE_TX_DISCARD_RD_ADDR_LO, rdev->mc.vram_location);
+	WREG32_PCIE(RADEON_PCIE_TX_DISCARD_RD_ADDR_HI, 0);
+	/* Clear error */
+	WREG32_PCIE(0x18, 0);
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
+	tmp |= RADEON_PCIE_TX_GART_EN;
+	tmp |= RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD;
+	WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp);
+	rv370_pcie_gart_tlb_flush(rdev);
+	DRM_INFO("PCIE GART of %uM enabled (table at 0x%08X).\n",
+		 rdev->mc.gtt_size >> 20, table_addr);
+	rdev->gart.ready = true;
+	return 0;
+}
+
+void rv370_pcie_gart_disable(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
+	tmp |= RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD;
+	WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp & ~RADEON_PCIE_TX_GART_EN);
+	if (rdev->gart.table.vram.robj) {
+		radeon_object_kunmap(rdev->gart.table.vram.robj);
+		radeon_object_unpin(rdev->gart.table.vram.robj);
+	}
+}
+
+int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
+{
+	void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+
+	if (i < 0 || i > rdev->gart.num_gpu_pages) {
+		return -EINVAL;
+	}
+	addr = (((u32)addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 4) | 0xC;
+	writel(cpu_to_le32(addr), ((void __iomem *)ptr) + (i * 4));
+	return 0;
+}
+
+int r300_gart_enable(struct radeon_device *rdev)
+{
+#if __OS_HAS_AGP
+	if (rdev->flags & RADEON_IS_AGP) {
+		if (rdev->family > CHIP_RV350) {
+			rv370_pcie_gart_disable(rdev);
+		} else {
+			r100_pci_gart_disable(rdev);
+		}
+		return 0;
+	}
+#endif
+	if (rdev->flags & RADEON_IS_PCIE) {
+		rdev->asic->gart_disable = &rv370_pcie_gart_disable;
+		rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
+		rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
+		return rv370_pcie_gart_enable(rdev);
+	}
+	return r100_pci_gart_enable(rdev);
+}
+
+
+/*
+ * MC
+ */
+int r300_mc_init(struct radeon_device *rdev)
+{
+	int r;
+
+	if (r100_debugfs_rbbm_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+	}
+
+	r300_gpu_init(rdev);
+	r100_pci_gart_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCIE) {
+		rv370_pcie_gart_disable(rdev);
+	}
+
+	/* Setup GPU memory space */
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	rdev->mc.gtt_location = 0xFFFFFFFFUL;
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r) {
+			printk(KERN_WARNING "[drm] Disabling AGP\n");
+			rdev->flags &= ~RADEON_IS_AGP;
+			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+		} else {
+			rdev->mc.gtt_location = rdev->mc.agp_base;
+		}
+	}
+	r = radeon_mc_setup(rdev);
+	if (r) {
+		return r;
+	}
+
+	/* Program GPU memory space */
+	r100_mc_disable_clients(rdev);
+	if (r300_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	r100_mc_setup(rdev);
+	return 0;
+}
+
+void r300_mc_fini(struct radeon_device *rdev)
+{
+	if (rdev->flags & RADEON_IS_PCIE) {
+		rv370_pcie_gart_disable(rdev);
+		radeon_gart_table_vram_free(rdev);
+	} else {
+		r100_pci_gart_disable(rdev);
+		radeon_gart_table_ram_free(rdev);
+	}
+	radeon_gart_fini(rdev);
+}
+
+
+/*
+ * Fence emission
+ */
+void r300_fence_ring_emit(struct radeon_device *rdev,
+			  struct radeon_fence *fence)
+{
+	/* Who ever call radeon_fence_emit should call ring_lock and ask
+	 * for enough space (today caller are ib schedule and buffer move) */
+	/* Write SC register so SC & US assert idle */
+	radeon_ring_write(rdev, PACKET0(0x43E0, 0));
+	radeon_ring_write(rdev, 0);
+	radeon_ring_write(rdev, PACKET0(0x43E4, 0));
+	radeon_ring_write(rdev, 0);
+	/* Flush 3D cache */
+	radeon_ring_write(rdev, PACKET0(0x4E4C, 0));
+	radeon_ring_write(rdev, (2 << 0));
+	radeon_ring_write(rdev, PACKET0(0x4F18, 0));
+	radeon_ring_write(rdev, (1 << 0));
+	/* Wait until IDLE & CLEAN */
+	radeon_ring_write(rdev, PACKET0(0x1720, 0));
+	radeon_ring_write(rdev, (1 << 17) | (1 << 16)  | (1 << 9));
+	/* Emit fence sequence & fire IRQ */
+	radeon_ring_write(rdev, PACKET0(rdev->fence_drv.scratch_reg, 0));
+	radeon_ring_write(rdev, fence->seq);
+	radeon_ring_write(rdev, PACKET0(RADEON_GEN_INT_STATUS, 0));
+	radeon_ring_write(rdev, RADEON_SW_INT_FIRE);
+}
+
+
+/*
+ * Global GPU functions
+ */
+int r300_copy_dma(struct radeon_device *rdev,
+		  uint64_t src_offset,
+		  uint64_t dst_offset,
+		  unsigned num_pages,
+		  struct radeon_fence *fence)
+{
+	uint32_t size;
+	uint32_t cur_size;
+	int i, num_loops;
+	int r = 0;
+
+	/* radeon pitch is /64 */
+	size = num_pages << PAGE_SHIFT;
+	num_loops = DIV_ROUND_UP(size, 0x1FFFFF);
+	r = radeon_ring_lock(rdev, num_loops * 4 + 64);
+	if (r) {
+		DRM_ERROR("radeon: moving bo (%d).\n", r);
+		return r;
+	}
+	/* Must wait for 2D idle & clean before DMA or hangs might happen */
+	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, (1 << 16));
+	for (i = 0; i < num_loops; i++) {
+		cur_size = size;
+		if (cur_size > 0x1FFFFF) {
+			cur_size = 0x1FFFFF;
+		}
+		size -= cur_size;
+		radeon_ring_write(rdev, PACKET0(0x720, 2));
+		radeon_ring_write(rdev, src_offset);
+		radeon_ring_write(rdev, dst_offset);
+		radeon_ring_write(rdev, cur_size | (1 << 31) | (1 << 30));
+		src_offset += cur_size;
+		dst_offset += cur_size;
+	}
+	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, RADEON_WAIT_DMA_GUI_IDLE);
+	if (fence) {
+		r = radeon_fence_emit(rdev, fence);
+	}
+	radeon_ring_unlock_commit(rdev);
+	return r;
+}
+
+void r300_ring_start(struct radeon_device *rdev)
+{
+	unsigned gb_tile_config;
+	int r;
+
+	/* Sub pixel 1/12 so we can have 4K rendering according to doc */
+	gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16);
+	switch (rdev->num_gb_pipes) {
+	case 2:
+		gb_tile_config |= R300_PIPE_COUNT_R300;
+		break;
+	case 3:
+		gb_tile_config |= R300_PIPE_COUNT_R420_3P;
+		break;
+	case 4:
+		gb_tile_config |= R300_PIPE_COUNT_R420;
+		break;
+	case 1:
+	default:
+		gb_tile_config |= R300_PIPE_COUNT_RV350;
+		break;
+	}
+
+	r = radeon_ring_lock(rdev, 64);
+	if (r) {
+		return;
+	}
+	radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0));
+	radeon_ring_write(rdev,
+			  RADEON_ISYNC_ANY2D_IDLE3D |
+			  RADEON_ISYNC_ANY3D_IDLE2D |
+			  RADEON_ISYNC_WAIT_IDLEGUI |
+			  RADEON_ISYNC_CPSCRATCH_IDLEGUI);
+	radeon_ring_write(rdev, PACKET0(R300_GB_TILE_CONFIG, 0));
+	radeon_ring_write(rdev, gb_tile_config);
+	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev,
+			  RADEON_WAIT_2D_IDLECLEAN |
+			  RADEON_WAIT_3D_IDLECLEAN);
+	radeon_ring_write(rdev, PACKET0(0x170C, 0));
+	radeon_ring_write(rdev, 1 << 31);
+	radeon_ring_write(rdev, PACKET0(R300_GB_SELECT, 0));
+	radeon_ring_write(rdev, 0);
+	radeon_ring_write(rdev, PACKET0(R300_GB_ENABLE, 0));
+	radeon_ring_write(rdev, 0);
+	radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
+	radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
+	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev,
+			  RADEON_WAIT_2D_IDLECLEAN |
+			  RADEON_WAIT_3D_IDLECLEAN);
+	radeon_ring_write(rdev, PACKET0(R300_GB_AA_CONFIG, 0));
+	radeon_ring_write(rdev, 0);
+	radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
+	radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
+	radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS0, 0));
+	radeon_ring_write(rdev,
+			  ((6 << R300_MS_X0_SHIFT) |
+			   (6 << R300_MS_Y0_SHIFT) |
+			   (6 << R300_MS_X1_SHIFT) |
+			   (6 << R300_MS_Y1_SHIFT) |
+			   (6 << R300_MS_X2_SHIFT) |
+			   (6 << R300_MS_Y2_SHIFT) |
+			   (6 << R300_MSBD0_Y_SHIFT) |
+			   (6 << R300_MSBD0_X_SHIFT)));
+	radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS1, 0));
+	radeon_ring_write(rdev,
+			  ((6 << R300_MS_X3_SHIFT) |
+			   (6 << R300_MS_Y3_SHIFT) |
+			   (6 << R300_MS_X4_SHIFT) |
+			   (6 << R300_MS_Y4_SHIFT) |
+			   (6 << R300_MS_X5_SHIFT) |
+			   (6 << R300_MS_Y5_SHIFT) |
+			   (6 << R300_MSBD1_SHIFT)));
+	radeon_ring_write(rdev, PACKET0(R300_GA_ENHANCE, 0));
+	radeon_ring_write(rdev, R300_GA_DEADLOCK_CNTL | R300_GA_FASTSYNC_CNTL);
+	radeon_ring_write(rdev, PACKET0(R300_GA_POLY_MODE, 0));
+	radeon_ring_write(rdev,
+			  R300_FRONT_PTYPE_TRIANGE | R300_BACK_PTYPE_TRIANGE);
+	radeon_ring_write(rdev, PACKET0(R300_GA_ROUND_MODE, 0));
+	radeon_ring_write(rdev,
+			  R300_GEOMETRY_ROUND_NEAREST |
+			  R300_COLOR_ROUND_NEAREST);
+	radeon_ring_unlock_commit(rdev);
+}
+
+void r300_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+
+	if (rdev->family == CHIP_R300 &&
+	    (RREG32(RADEON_CONFIG_CNTL) & RADEON_CFG_ATI_REV_ID_MASK) == RADEON_CFG_ATI_REV_A11) {
+		rdev->pll_errata |= CHIP_ERRATA_R300_CG;
+	}
+}
+
+int r300_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		/* read MC_STATUS */
+		tmp = RREG32(0x0150);
+		if (tmp & (1 << 4)) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
+void r300_gpu_init(struct radeon_device *rdev)
+{
+	uint32_t gb_tile_config, tmp;
+
+	r100_hdp_reset(rdev);
+	/* FIXME: rv380 one pipes ? */
+	if ((rdev->family == CHIP_R300) || (rdev->family == CHIP_R350)) {
+		/* r300,r350 */
+		rdev->num_gb_pipes = 2;
+	} else {
+		/* rv350,rv370,rv380 */
+		rdev->num_gb_pipes = 1;
+	}
+	gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16);
+	switch (rdev->num_gb_pipes) {
+	case 2:
+		gb_tile_config |= R300_PIPE_COUNT_R300;
+		break;
+	case 3:
+		gb_tile_config |= R300_PIPE_COUNT_R420_3P;
+		break;
+	case 4:
+		gb_tile_config |= R300_PIPE_COUNT_R420;
+		break;
+	case 1:
+	default:
+		gb_tile_config |= R300_PIPE_COUNT_RV350;
+		break;
+	}
+	WREG32(R300_GB_TILE_CONFIG, gb_tile_config);
+
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	tmp = RREG32(0x170C);
+	WREG32(0x170C, tmp | (1 << 31));
+
+	WREG32(R300_RB2D_DSTCACHE_MODE,
+	       R300_DC_AUTOFLUSH_ENABLE |
+	       R300_DC_DC_DISABLE_IGNORE_PE);
+
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	if (r300_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+}
+
+int r300_ga_reset(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	bool reinit_cp;
+	int i;
+
+	reinit_cp = rdev->cp.ready;
+	rdev->cp.ready = false;
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		WREG32(RADEON_CP_CSQ_MODE, 0);
+		WREG32(RADEON_CP_CSQ_CNTL, 0);
+		WREG32(RADEON_RBBM_SOFT_RESET, 0x32005);
+		(void)RREG32(RADEON_RBBM_SOFT_RESET);
+		udelay(200);
+		WREG32(RADEON_RBBM_SOFT_RESET, 0);
+		/* Wait to prevent race in RBBM_STATUS */
+		mdelay(1);
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (tmp & ((1 << 20) | (1 << 26))) {
+			DRM_ERROR("VAP & CP still busy (RBBM_STATUS=0x%08X)", tmp);
+			/* GA still busy soft reset it */
+			WREG32(0x429C, 0x200);
+			WREG32(R300_VAP_PVS_STATE_FLUSH_REG, 0);
+			WREG32(0x43E0, 0);
+			WREG32(0x43E4, 0);
+			WREG32(0x24AC, 0);
+		}
+		/* Wait to prevent race in RBBM_STATUS */
+		mdelay(1);
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (!(tmp & ((1 << 20) | (1 << 26)))) {
+			break;
+		}
+	}
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (!(tmp & ((1 << 20) | (1 << 26)))) {
+			DRM_INFO("GA reset succeed (RBBM_STATUS=0x%08X)\n",
+				 tmp);
+			if (reinit_cp) {
+				return r100_cp_init(rdev, rdev->cp.ring_size);
+			}
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	tmp = RREG32(RADEON_RBBM_STATUS);
+	DRM_ERROR("Failed to reset GA ! (RBBM_STATUS=0x%08X)\n", tmp);
+	return -1;
+}
+
+int r300_gpu_reset(struct radeon_device *rdev)
+{
+	uint32_t status;
+
+	/* reset order likely matter */
+	status = RREG32(RADEON_RBBM_STATUS);
+	/* reset HDP */
+	r100_hdp_reset(rdev);
+	/* reset rb2d */
+	if (status & ((1 << 17) | (1 << 18) | (1 << 27))) {
+		r100_rb2d_reset(rdev);
+	}
+	/* reset GA */
+	if (status & ((1 << 20) | (1 << 26))) {
+		r300_ga_reset(rdev);
+	}
+	/* reset CP */
+	status = RREG32(RADEON_RBBM_STATUS);
+	if (status & (1 << 16)) {
+		r100_cp_reset(rdev);
+	}
+	/* Check if GPU is idle */
+	status = RREG32(RADEON_RBBM_STATUS);
+	if (status & (1 << 31)) {
+		DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status);
+		return -1;
+	}
+	DRM_INFO("GPU reset succeed (RBBM_STATUS=0x%08X)\n", status);
+	return 0;
+}
+
+
+/*
+ * r300,r350,rv350,rv380 VRAM info
+ */
+void r300_vram_info(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	/* DDR for all card after R300 & IGP */
+	rdev->mc.vram_is_ddr = true;
+	tmp = RREG32(RADEON_MEM_CNTL);
+	if (tmp & R300_MEM_NUM_CHANNELS_MASK) {
+		rdev->mc.vram_width = 128;
+	} else {
+		rdev->mc.vram_width = 64;
+	}
+	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+}
+
+
+/*
+ * Indirect registers accessor
+ */
+uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t r;
+
+	WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff));
+	(void)RREG32(RADEON_PCIE_INDEX);
+	r = RREG32(RADEON_PCIE_DATA);
+	return r;
+}
+
+void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff));
+	(void)RREG32(RADEON_PCIE_INDEX);
+	WREG32(RADEON_PCIE_DATA, (v));
+	(void)RREG32(RADEON_PCIE_DATA);
+}
+
+/*
+ * PCIE Lanes
+ */
+
+void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes)
+{
+	uint32_t link_width_cntl, mask;
+
+	if (rdev->flags & RADEON_IS_IGP)
+		return;
+
+	if (!(rdev->flags & RADEON_IS_PCIE))
+		return;
+
+	/* FIXME wait for idle */
+
+	switch (lanes) {
+	case 0:
+		mask = RADEON_PCIE_LC_LINK_WIDTH_X0;
+		break;
+	case 1:
+		mask = RADEON_PCIE_LC_LINK_WIDTH_X1;
+		break;
+	case 2:
+		mask = RADEON_PCIE_LC_LINK_WIDTH_X2;
+		break;
+	case 4:
+		mask = RADEON_PCIE_LC_LINK_WIDTH_X4;
+		break;
+	case 8:
+		mask = RADEON_PCIE_LC_LINK_WIDTH_X8;
+		break;
+	case 12:
+		mask = RADEON_PCIE_LC_LINK_WIDTH_X12;
+		break;
+	case 16:
+	default:
+		mask = RADEON_PCIE_LC_LINK_WIDTH_X16;
+		break;
+	}
+
+	link_width_cntl = RREG32_PCIE(RADEON_PCIE_LC_LINK_WIDTH_CNTL);
+
+	if ((link_width_cntl & RADEON_PCIE_LC_LINK_WIDTH_RD_MASK) ==
+	    (mask << RADEON_PCIE_LC_LINK_WIDTH_RD_SHIFT))
+		return;
+
+	link_width_cntl &= ~(RADEON_PCIE_LC_LINK_WIDTH_MASK |
+			     RADEON_PCIE_LC_RECONFIG_NOW |
+			     RADEON_PCIE_LC_RECONFIG_LATER |
+			     RADEON_PCIE_LC_SHORT_RECONFIG_EN);
+	link_width_cntl |= mask;
+	WREG32_PCIE(RADEON_PCIE_LC_LINK_WIDTH_CNTL, link_width_cntl);
+	WREG32_PCIE(RADEON_PCIE_LC_LINK_WIDTH_CNTL, (link_width_cntl |
+						     RADEON_PCIE_LC_RECONFIG_NOW));
+
+	/* wait for lane set to complete */
+	link_width_cntl = RREG32_PCIE(RADEON_PCIE_LC_LINK_WIDTH_CNTL);
+	while (link_width_cntl == 0xffffffff)
+		link_width_cntl = RREG32_PCIE(RADEON_PCIE_LC_LINK_WIDTH_CNTL);
+
+}
+
+
+/*
+ * Debugfs info
+ */
+#if defined(CONFIG_DEBUG_FS)
+static int rv370_debugfs_pcie_gart_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL);
+	seq_printf(m, "PCIE_TX_GART_CNTL 0x%08x\n", tmp);
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_BASE);
+	seq_printf(m, "PCIE_TX_GART_BASE 0x%08x\n", tmp);
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_START_LO);
+	seq_printf(m, "PCIE_TX_GART_START_LO 0x%08x\n", tmp);
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_START_HI);
+	seq_printf(m, "PCIE_TX_GART_START_HI 0x%08x\n", tmp);
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_END_LO);
+	seq_printf(m, "PCIE_TX_GART_END_LO 0x%08x\n", tmp);
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_END_HI);
+	seq_printf(m, "PCIE_TX_GART_END_HI 0x%08x\n", tmp);
+	tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_ERROR);
+	seq_printf(m, "PCIE_TX_GART_ERROR 0x%08x\n", tmp);
+	return 0;
+}
+
+static struct drm_info_list rv370_pcie_gart_info_list[] = {
+	{"rv370_pcie_gart_info", rv370_debugfs_pcie_gart_info, 0, NULL},
+};
+#endif
+
+int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, rv370_pcie_gart_info_list, 1);
+#else
+	return 0;
+#endif
+}
+
+
+/*
+ * CS functions
+ */
+struct r300_cs_track_cb {
+	struct radeon_object	*robj;
+	unsigned		pitch;
+	unsigned		cpp;
+	unsigned		offset;
+};
+
+struct r300_cs_track {
+	unsigned		num_cb;
+	unsigned		maxy;
+	struct r300_cs_track_cb cb[4];
+	struct r300_cs_track_cb zb;
+	bool			z_enabled;
+};
+
+int r300_cs_track_check(struct radeon_device *rdev, struct r300_cs_track *track)
+{
+	unsigned i;
+	unsigned long size;
+
+	for (i = 0; i < track->num_cb; i++) {
+		if (track->cb[i].robj == NULL) {
+			DRM_ERROR("[drm] No buffer for color buffer %d !\n", i);
+			return -EINVAL;
+		}
+		size = track->cb[i].pitch * track->cb[i].cpp * track->maxy;
+		size += track->cb[i].offset;
+		if (size > radeon_object_size(track->cb[i].robj)) {
+			DRM_ERROR("[drm] Buffer too small for color buffer %d "
+				  "(need %lu have %lu) !\n", i, size,
+				  radeon_object_size(track->cb[i].robj));
+			DRM_ERROR("[drm] color buffer %d (%u %u %u %u)\n",
+				  i, track->cb[i].pitch, track->cb[i].cpp,
+				  track->cb[i].offset, track->maxy);
+			return -EINVAL;
+		}
+	}
+	if (track->z_enabled) {
+		if (track->zb.robj == NULL) {
+			DRM_ERROR("[drm] No buffer for z buffer !\n");
+			return -EINVAL;
+		}
+		size = track->zb.pitch * track->zb.cpp * track->maxy;
+		size += track->zb.offset;
+		if (size > radeon_object_size(track->zb.robj)) {
+			DRM_ERROR("[drm] Buffer too small for z buffer "
+				  "(need %lu have %lu) !\n", size,
+				  radeon_object_size(track->zb.robj));
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static inline void r300_cs_track_clear(struct r300_cs_track *track)
+{
+	unsigned i;
+
+	track->num_cb = 4;
+	track->maxy = 4096;
+	for (i = 0; i < track->num_cb; i++) {
+		track->cb[i].robj = NULL;
+		track->cb[i].pitch = 8192;
+		track->cb[i].cpp = 16;
+		track->cb[i].offset = 0;
+	}
+	track->z_enabled = true;
+	track->zb.robj = NULL;
+	track->zb.pitch = 8192;
+	track->zb.cpp = 4;
+	track->zb.offset = 0;
+}
+
+static unsigned r300_auth_reg[] = {
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0x17FF1FFF, 0xFFFFFFFC, 0xFFFFFFFF, 0xFF30FFBF,
+	0xFFFFFFF8, 0xC3E6FFFF, 0xFFFFF6DF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFF03F,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFCFCC, 0xF00E9FFF, 0x007C0000,
+	0xF0000078, 0xFF000009, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFF7FF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFC78, 0xFFFFFFFF, 0xFFFFFFFC, 0xFFFFFFFF,
+	0x38FF8F50, 0xFFF88082, 0xF000000C, 0xFAE009FF,
+	0x00000000, 0x00000000, 0xFFFF0000, 0x00000000,
+	0x00000000, 0x0000C100, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0xFFFF0000, 0xFFFFFFFF, 0xFF80FFFF,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x0003FC01, 0xFFFFFFF8, 0xFE800B19,
+};
+
+static int r300_packet0_check(struct radeon_cs_parser *p,
+		struct radeon_cs_packet *pkt,
+		unsigned idx, unsigned reg)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	struct radeon_cs_reloc *reloc;
+	struct r300_cs_track *track;
+	volatile uint32_t *ib;
+	uint32_t tmp;
+	unsigned i;
+	int r;
+
+	ib = p->ib->ptr;
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	track = (struct r300_cs_track *)p->track;
+	switch (reg) {
+	case RADEON_DST_PITCH_OFFSET:
+	case RADEON_SRC_PITCH_OFFSET:
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		tmp = ib_chunk->kdata[idx] & 0x003fffff;
+		tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
+		ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+		break;
+	case R300_RB3D_COLOROFFSET0:
+	case R300_RB3D_COLOROFFSET1:
+	case R300_RB3D_COLOROFFSET2:
+	case R300_RB3D_COLOROFFSET3:
+		i = (reg - R300_RB3D_COLOROFFSET0) >> 2;
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		track->cb[i].robj = reloc->robj;
+		track->cb[i].offset = ib_chunk->kdata[idx];
+		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		break;
+	case R300_ZB_DEPTHOFFSET:
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		track->zb.robj = reloc->robj;
+		track->zb.offset = ib_chunk->kdata[idx];
+		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		break;
+	case R300_TX_OFFSET_0:
+	case R300_TX_OFFSET_0+4:
+	case R300_TX_OFFSET_0+8:
+	case R300_TX_OFFSET_0+12:
+	case R300_TX_OFFSET_0+16:
+	case R300_TX_OFFSET_0+20:
+	case R300_TX_OFFSET_0+24:
+	case R300_TX_OFFSET_0+28:
+	case R300_TX_OFFSET_0+32:
+	case R300_TX_OFFSET_0+36:
+	case R300_TX_OFFSET_0+40:
+	case R300_TX_OFFSET_0+44:
+	case R300_TX_OFFSET_0+48:
+	case R300_TX_OFFSET_0+52:
+	case R300_TX_OFFSET_0+56:
+	case R300_TX_OFFSET_0+60:
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		break;
+	/* Tracked registers */
+	case 0x43E4:
+		/* SC_SCISSOR1 */
+
+		track->maxy = ((ib_chunk->kdata[idx] >> 13) & 0x1FFF) + 1;
+		if (p->rdev->family < CHIP_RV515) {
+			track->maxy -= 1440;
+		}
+		break;
+	case 0x4E00:
+		/* RB3D_CCTL */
+		track->num_cb = ((ib_chunk->kdata[idx] >> 5) & 0x3) + 1;
+		break;
+	case 0x4E38:
+	case 0x4E3C:
+	case 0x4E40:
+	case 0x4E44:
+		/* RB3D_COLORPITCH0 */
+		/* RB3D_COLORPITCH1 */
+		/* RB3D_COLORPITCH2 */
+		/* RB3D_COLORPITCH3 */
+		i = (reg - 0x4E38) >> 2;
+		track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
+		switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
+		case 9:
+		case 11:
+		case 12:
+			track->cb[i].cpp = 1;
+			break;
+		case 3:
+		case 4:
+		case 13:
+		case 15:
+			track->cb[i].cpp = 2;
+			break;
+		case 6:
+			track->cb[i].cpp = 4;
+			break;
+		case 10:
+			track->cb[i].cpp = 8;
+			break;
+		case 7:
+			track->cb[i].cpp = 16;
+			break;
+		default:
+			DRM_ERROR("Invalid color buffer format (%d) !\n",
+				  ((ib_chunk->kdata[idx] >> 21) & 0xF));
+			return -EINVAL;
+		}
+		break;
+	case 0x4F00:
+		/* ZB_CNTL */
+		if (ib_chunk->kdata[idx] & 2) {
+			track->z_enabled = true;
+		} else {
+			track->z_enabled = false;
+		}
+		break;
+	case 0x4F10:
+		/* ZB_FORMAT */
+		switch ((ib_chunk->kdata[idx] & 0xF)) {
+		case 0:
+		case 1:
+			track->zb.cpp = 2;
+			break;
+		case 2:
+			track->zb.cpp = 4;
+			break;
+		default:
+			DRM_ERROR("Invalid z buffer format (%d) !\n",
+				  (ib_chunk->kdata[idx] & 0xF));
+			return -EINVAL;
+		}
+		break;
+	case 0x4F24:
+		/* ZB_DEPTHPITCH */
+		track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
+		break;
+	default:
+		printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n", reg, idx);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int r300_packet3_check(struct radeon_cs_parser *p,
+			      struct radeon_cs_packet *pkt)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	struct radeon_cs_reloc *reloc;
+	struct r300_cs_track *track;
+	volatile uint32_t *ib;
+	unsigned idx;
+	unsigned i, c;
+	int r;
+
+	ib = p->ib->ptr;
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	idx = pkt->idx + 1;
+	track = (struct r300_cs_track *)p->track;
+	switch (pkt->opcode) {
+	case PACKET3_3D_LOAD_VBPNTR:
+		c = ib_chunk->kdata[idx++];
+		for (i = 0; i < (c - 1); i += 2, idx += 3) {
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
+		}
+		if (c & 1) {
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		}
+		break;
+	case PACKET3_INDX_BUFFER:
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n", pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		break;
+	/* Draw packet */
+	case PACKET3_3D_DRAW_VBUF:
+	case PACKET3_3D_DRAW_IMMD:
+	case PACKET3_3D_DRAW_INDX:
+	case PACKET3_3D_DRAW_VBUF_2:
+	case PACKET3_3D_DRAW_IMMD_2:
+	case PACKET3_3D_DRAW_INDX_2:
+		r = r300_cs_track_check(p->rdev, track);
+		if (r) {
+			return r;
+		}
+		break;
+	case PACKET3_NOP:
+		break;
+	default:
+		DRM_ERROR("Packet3 opcode %x not supported\n", pkt->opcode);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int r300_cs_parse(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_packet pkt;
+	struct r300_cs_track track;
+	int r;
+
+	r300_cs_track_clear(&track);
+	p->track = &track;
+	do {
+		r = r100_cs_packet_parse(p, &pkt, p->idx);
+		if (r) {
+			return r;
+		}
+		p->idx += pkt.count + 2;
+		switch (pkt.type) {
+		case PACKET_TYPE0:
+			r = r100_cs_parse_packet0(p, &pkt,
+						  r300_auth_reg,
+						  ARRAY_SIZE(r300_auth_reg),
+						  &r300_packet0_check);
+			break;
+		case PACKET_TYPE2:
+			break;
+		case PACKET_TYPE3:
+			r = r300_packet3_check(p, &pkt);
+			break;
+		default:
+			DRM_ERROR("Unknown packet type %d !\n", pkt.type);
+			return -EINVAL;
+		}
+		if (r) {
+			return r;
+		}
+	} while (p->idx < p->chunks[p->chunk_ib_idx].length_dw);
+	return 0;
+}
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index bdbc95fa672..70f48609515 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -1,30 +1,34 @@
-/**************************************************************************
-
-Copyright (C) 2004-2005 Nicolai Haehnle et al.
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-on the rights to use, copy, modify, merge, publish, distribute, sub
-license, and/or sell copies of the Software, and to permit persons to whom
-the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice (including the next
-paragraph) shall be included in all copies or substantial portions of the
-Software.
+/*
+ * Copyright 2005 Nicolai Haehnle et al.
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Nicolai Haehnle
+ *          Jerome Glisse
+ */
+#ifndef _R300_REG_H_
+#define _R300_REG_H_
 
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
-THE AUTHOR(S) AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM,
-DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
-OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
-USE OR OTHER DEALINGS IN THE SOFTWARE.
 
-**************************************************************************/
 
-#ifndef _R300_REG_H
-#define _R300_REG_H
 
 #define R300_MC_INIT_MISC_LAT_TIMER	0x180
 #	define R300_MC_MISC__MC_CPR_INIT_LAT_SHIFT	0
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
new file mode 100644
index 00000000000..dea497a979f
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include <linux/seq_file.h>
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* r420,r423,rv410 depends on : */
+void r100_pci_gart_disable(struct radeon_device *rdev);
+void r100_hdp_reset(struct radeon_device *rdev);
+void r100_mc_setup(struct radeon_device *rdev);
+int r100_gui_wait_for_idle(struct radeon_device *rdev);
+void r100_mc_disable_clients(struct radeon_device *rdev);
+void r300_vram_info(struct radeon_device *rdev);
+int r300_mc_wait_for_idle(struct radeon_device *rdev);
+int rv370_pcie_gart_enable(struct radeon_device *rdev);
+void rv370_pcie_gart_disable(struct radeon_device *rdev);
+
+/* This files gather functions specifics to :
+ * r420,r423,rv410
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+void r420_gpu_init(struct radeon_device *rdev);
+int r420_debugfs_pipes_info_init(struct radeon_device *rdev);
+
+
+/*
+ * MC
+ */
+int r420_mc_init(struct radeon_device *rdev)
+{
+	int r;
+
+	if (r100_debugfs_rbbm_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+	}
+	if (r420_debugfs_pipes_info_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for pipes !\n");
+	}
+
+	r420_gpu_init(rdev);
+	r100_pci_gart_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCIE) {
+		rv370_pcie_gart_disable(rdev);
+	}
+
+	/* Setup GPU memory space */
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	rdev->mc.gtt_location = 0xFFFFFFFFUL;
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r) {
+			printk(KERN_WARNING "[drm] Disabling AGP\n");
+			rdev->flags &= ~RADEON_IS_AGP;
+			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+		} else {
+			rdev->mc.gtt_location = rdev->mc.agp_base;
+		}
+	}
+	r = radeon_mc_setup(rdev);
+	if (r) {
+		return r;
+	}
+
+	/* Program GPU memory space */
+	r100_mc_disable_clients(rdev);
+	if (r300_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	r100_mc_setup(rdev);
+	return 0;
+}
+
+void r420_mc_fini(struct radeon_device *rdev)
+{
+	rv370_pcie_gart_disable(rdev);
+	radeon_gart_table_vram_free(rdev);
+	radeon_gart_fini(rdev);
+}
+
+
+/*
+ * Global GPU functions
+ */
+void r420_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+void r420_pipes_init(struct radeon_device *rdev)
+{
+	unsigned tmp;
+	unsigned gb_pipe_select;
+	unsigned num_pipes;
+
+	/* GA_ENHANCE workaround TCL deadlock issue */
+	WREG32(0x4274, (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3));
+	/* get max number of pipes */
+	gb_pipe_select = RREG32(0x402C);
+	num_pipes = ((gb_pipe_select >> 12) & 3) + 1;
+	rdev->num_gb_pipes = num_pipes;
+	tmp = 0;
+	switch (num_pipes) {
+	default:
+		/* force to 1 pipe */
+		num_pipes = 1;
+	case 1:
+		tmp = (0 << 1);
+		break;
+	case 2:
+		tmp = (3 << 1);
+		break;
+	case 3:
+		tmp = (6 << 1);
+		break;
+	case 4:
+		tmp = (7 << 1);
+		break;
+	}
+	WREG32(0x42C8, (1 << num_pipes) - 1);
+	/* Sub pixel 1/12 so we can have 4K rendering according to doc */
+	tmp |= (1 << 4) | (1 << 0);
+	WREG32(0x4018, tmp);
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	tmp = RREG32(0x170C);
+	WREG32(0x170C, tmp | (1 << 31));
+
+	WREG32(R300_RB2D_DSTCACHE_MODE,
+	       RREG32(R300_RB2D_DSTCACHE_MODE) |
+	       R300_DC_AUTOFLUSH_ENABLE |
+	       R300_DC_DC_DISABLE_IGNORE_PE);
+
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes);
+}
+
+void r420_gpu_init(struct radeon_device *rdev)
+{
+	r100_hdp_reset(rdev);
+	r420_pipes_init(rdev);
+	if (r300_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+}
+
+
+/*
+ * r420,r423,rv410 VRAM info
+ */
+void r420_vram_info(struct radeon_device *rdev)
+{
+	r300_vram_info(rdev);
+}
+
+
+/*
+ * Debugfs info
+ */
+#if defined(CONFIG_DEBUG_FS)
+static int r420_debugfs_pipes_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = RREG32(R400_GB_PIPE_SELECT);
+	seq_printf(m, "GB_PIPE_SELECT 0x%08x\n", tmp);
+	tmp = RREG32(R300_GB_TILE_CONFIG);
+	seq_printf(m, "GB_TILE_CONFIG 0x%08x\n", tmp);
+	tmp = RREG32(R300_DST_PIPE_CONFIG);
+	seq_printf(m, "DST_PIPE_CONFIG 0x%08x\n", tmp);
+	return 0;
+}
+
+static struct drm_info_list r420_pipes_info_list[] = {
+	{"r420_pipes_info", r420_debugfs_pipes_info, 0, NULL},
+};
+#endif
+
+int r420_debugfs_pipes_info_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, r420_pipes_info_list, 1);
+#else
+	return 0;
+#endif
+}
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
new file mode 100644
index 00000000000..9070a1c2ce2
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -0,0 +1,749 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __R500_REG_H__
+#define __R500_REG_H__
+
+/* pipe config regs */
+#define R300_GA_POLY_MODE				0x4288
+#       define R300_FRONT_PTYPE_POINT                   (0 << 4)
+#       define R300_FRONT_PTYPE_LINE                    (1 << 4)
+#       define R300_FRONT_PTYPE_TRIANGE                 (2 << 4)
+#       define R300_BACK_PTYPE_POINT                    (0 << 7)
+#       define R300_BACK_PTYPE_LINE                     (1 << 7)
+#       define R300_BACK_PTYPE_TRIANGE                  (2 << 7)
+#define R300_GA_ROUND_MODE				0x428c
+#       define R300_GEOMETRY_ROUND_TRUNC                (0 << 0)
+#       define R300_GEOMETRY_ROUND_NEAREST              (1 << 0)
+#       define R300_COLOR_ROUND_TRUNC                   (0 << 2)
+#       define R300_COLOR_ROUND_NEAREST                 (1 << 2)
+#define R300_GB_MSPOS0				        0x4010
+#       define R300_MS_X0_SHIFT                         0
+#       define R300_MS_Y0_SHIFT                         4
+#       define R300_MS_X1_SHIFT                         8
+#       define R300_MS_Y1_SHIFT                         12
+#       define R300_MS_X2_SHIFT                         16
+#       define R300_MS_Y2_SHIFT                         20
+#       define R300_MSBD0_Y_SHIFT                       24
+#       define R300_MSBD0_X_SHIFT                       28
+#define R300_GB_MSPOS1				        0x4014
+#       define R300_MS_X3_SHIFT                         0
+#       define R300_MS_Y3_SHIFT                         4
+#       define R300_MS_X4_SHIFT                         8
+#       define R300_MS_Y4_SHIFT                         12
+#       define R300_MS_X5_SHIFT                         16
+#       define R300_MS_Y5_SHIFT                         20
+#       define R300_MSBD1_SHIFT                         24
+
+#define R300_GA_ENHANCE				        0x4274
+#       define R300_GA_DEADLOCK_CNTL                    (1 << 0)
+#       define R300_GA_FASTSYNC_CNTL                    (1 << 1)
+#define R300_RB3D_DSTCACHE_CTLSTAT              0x4e4c
+#	define R300_RB3D_DC_FLUSH		(2 << 0)
+#	define R300_RB3D_DC_FREE		(2 << 2)
+#	define R300_RB3D_DC_FINISH		(1 << 4)
+#define R300_RB3D_ZCACHE_CTLSTAT			0x4f18
+#       define R300_ZC_FLUSH                            (1 << 0)
+#       define R300_ZC_FREE                             (1 << 1)
+#       define R300_ZC_FLUSH_ALL                        0x3
+#define R400_GB_PIPE_SELECT             0x402c
+#define R500_DYN_SCLK_PWMEM_PIPE        0x000d /* PLL */
+#define R500_SU_REG_DEST                0x42c8
+#define R300_GB_TILE_CONFIG             0x4018
+#       define R300_ENABLE_TILING       (1 << 0)
+#       define R300_PIPE_COUNT_RV350    (0 << 1)
+#       define R300_PIPE_COUNT_R300     (3 << 1)
+#       define R300_PIPE_COUNT_R420_3P  (6 << 1)
+#       define R300_PIPE_COUNT_R420     (7 << 1)
+#       define R300_TILE_SIZE_8         (0 << 4)
+#       define R300_TILE_SIZE_16        (1 << 4)
+#       define R300_TILE_SIZE_32        (2 << 4)
+#       define R300_SUBPIXEL_1_12       (0 << 16)
+#       define R300_SUBPIXEL_1_16       (1 << 16)
+#define R300_DST_PIPE_CONFIG            0x170c
+#       define R300_PIPE_AUTO_CONFIG    (1 << 31)
+#define R300_RB2D_DSTCACHE_MODE         0x3428
+#       define R300_DC_AUTOFLUSH_ENABLE (1 << 8)
+#       define R300_DC_DC_DISABLE_IGNORE_PE (1 << 17)
+
+#define RADEON_CP_STAT		0x7C0
+#define RADEON_RBBM_CMDFIFO_ADDR	0xE70
+#define RADEON_RBBM_CMDFIFO_DATA	0xE74
+#define RADEON_ISYNC_CNTL		0x1724
+#	define RADEON_ISYNC_ANY2D_IDLE3D	(1 << 0)
+#	define RADEON_ISYNC_ANY3D_IDLE2D	(1 << 1)
+#	define RADEON_ISYNC_TRIG2D_IDLE3D	(1 << 2)
+#	define RADEON_ISYNC_TRIG3D_IDLE2D	(1 << 3)
+#	define RADEON_ISYNC_WAIT_IDLEGUI	(1 << 4)
+#	define RADEON_ISYNC_CPSCRATCH_IDLEGUI	(1 << 5)
+
+#define RS480_NB_MC_INDEX               0x168
+#	define RS480_NB_MC_IND_WR_EN	(1 << 8)
+#define RS480_NB_MC_DATA                0x16c
+
+/*
+ * RS690
+ */
+#define RS690_MCCFG_FB_LOCATION		0x100
+#define		RS690_MC_FB_START_MASK		0x0000FFFF
+#define		RS690_MC_FB_START_SHIFT		0
+#define		RS690_MC_FB_TOP_MASK		0xFFFF0000
+#define		RS690_MC_FB_TOP_SHIFT		16
+#define RS690_MCCFG_AGP_LOCATION	0x101
+#define		RS690_MC_AGP_START_MASK		0x0000FFFF
+#define		RS690_MC_AGP_START_SHIFT	0
+#define		RS690_MC_AGP_TOP_MASK		0xFFFF0000
+#define		RS690_MC_AGP_TOP_SHIFT		16
+#define RS690_MCCFG_AGP_BASE		0x102
+#define RS690_MCCFG_AGP_BASE_2		0x103
+#define RS690_MC_INIT_MISC_LAT_TIMER            0x104
+#define RS690_HDP_FB_LOCATION		0x0134
+#define RS690_MC_INDEX				0x78
+#	define RS690_MC_INDEX_MASK		0x1ff
+#	define RS690_MC_INDEX_WR_EN		(1 << 9)
+#	define RS690_MC_INDEX_WR_ACK		0x7f
+#define RS690_MC_DATA				0x7c
+#define RS690_MC_STATUS                         0x90
+#define RS690_MC_STATUS_IDLE                    (1 << 0)
+#define RS480_AGP_BASE_2		0x0164
+#define RS480_MC_MISC_CNTL              0x18
+#	define RS480_DISABLE_GTW	(1 << 1)
+#	define RS480_GART_INDEX_REG_EN	(1 << 12)
+#	define RS690_BLOCK_GFX_D3_EN	(1 << 14)
+#define RS480_GART_FEATURE_ID           0x2b
+#	define RS480_HANG_EN	        (1 << 11)
+#	define RS480_TLB_ENABLE	        (1 << 18)
+#	define RS480_P2P_ENABLE	        (1 << 19)
+#	define RS480_GTW_LAC_EN	        (1 << 25)
+#	define RS480_2LEVEL_GART	(0 << 30)
+#	define RS480_1LEVEL_GART	(1 << 30)
+#	define RS480_PDC_EN	        (1 << 31)
+#define RS480_GART_BASE                 0x2c
+#define RS480_GART_CACHE_CNTRL          0x2e
+#	define RS480_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */
+#define RS480_AGP_ADDRESS_SPACE_SIZE    0x38
+#	define RS480_GART_EN	        (1 << 0)
+#	define RS480_VA_SIZE_32MB	(0 << 1)
+#	define RS480_VA_SIZE_64MB	(1 << 1)
+#	define RS480_VA_SIZE_128MB	(2 << 1)
+#	define RS480_VA_SIZE_256MB	(3 << 1)
+#	define RS480_VA_SIZE_512MB	(4 << 1)
+#	define RS480_VA_SIZE_1GB	(5 << 1)
+#	define RS480_VA_SIZE_2GB	(6 << 1)
+#define RS480_AGP_MODE_CNTL             0x39
+#	define RS480_POST_GART_Q_SIZE	(1 << 18)
+#	define RS480_NONGART_SNOOP	(1 << 19)
+#	define RS480_AGP_RD_BUF_SIZE	(1 << 20)
+#	define RS480_REQ_TYPE_SNOOP_SHIFT 22
+#	define RS480_REQ_TYPE_SNOOP_MASK  0x3
+#	define RS480_REQ_TYPE_SNOOP_DIS	(1 << 24)
+
+#define RS690_AIC_CTRL_SCRATCH		0x3A
+#	define RS690_DIS_OUT_OF_PCI_GART_ACCESS	(1 << 1)
+
+/*
+ * RS600
+ */
+#define RS600_MC_STATUS                         0x0
+#define RS600_MC_STATUS_IDLE                    (1 << 0)
+#define RS600_MC_INDEX                          0x70
+#       define RS600_MC_ADDR_MASK               0xffff
+#       define RS600_MC_IND_SEQ_RBS_0           (1 << 16)
+#       define RS600_MC_IND_SEQ_RBS_1           (1 << 17)
+#       define RS600_MC_IND_SEQ_RBS_2           (1 << 18)
+#       define RS600_MC_IND_SEQ_RBS_3           (1 << 19)
+#       define RS600_MC_IND_AIC_RBS             (1 << 20)
+#       define RS600_MC_IND_CITF_ARB0           (1 << 21)
+#       define RS600_MC_IND_CITF_ARB1           (1 << 22)
+#       define RS600_MC_IND_WR_EN               (1 << 23)
+#define RS600_MC_DATA                           0x74
+#define RS600_MC_STATUS                         0x0
+#       define RS600_MC_IDLE                    (1 << 1)
+#define RS600_MC_FB_LOCATION                    0x4
+#define		RS600_MC_FB_START_MASK		0x0000FFFF
+#define		RS600_MC_FB_START_SHIFT		0
+#define		RS600_MC_FB_TOP_MASK		0xFFFF0000
+#define		RS600_MC_FB_TOP_SHIFT		16
+#define RS600_MC_AGP_LOCATION                   0x5
+#define		RS600_MC_AGP_START_MASK		0x0000FFFF
+#define		RS600_MC_AGP_START_SHIFT	0
+#define		RS600_MC_AGP_TOP_MASK		0xFFFF0000
+#define		RS600_MC_AGP_TOP_SHIFT		16
+#define RS600_MC_AGP_BASE                          0x6
+#define RS600_MC_AGP_BASE_2                        0x7
+#define RS600_MC_CNTL1                          0x9
+#       define RS600_ENABLE_PAGE_TABLES         (1 << 26)
+#define RS600_MC_PT0_CNTL                       0x100
+#       define RS600_ENABLE_PT                  (1 << 0)
+#       define RS600_EFFECTIVE_L2_CACHE_SIZE(x) ((x) << 15)
+#       define RS600_EFFECTIVE_L2_QUEUE_SIZE(x) ((x) << 21)
+#       define RS600_INVALIDATE_ALL_L1_TLBS     (1 << 28)
+#       define RS600_INVALIDATE_L2_CACHE        (1 << 29)
+#define RS600_MC_PT0_CONTEXT0_CNTL              0x102
+#       define RS600_ENABLE_PAGE_TABLE          (1 << 0)
+#       define RS600_PAGE_TABLE_TYPE_FLAT       (0 << 1)
+#define RS600_MC_PT0_SYSTEM_APERTURE_LOW_ADDR   0x112
+#define RS600_MC_PT0_SYSTEM_APERTURE_HIGH_ADDR  0x114
+#define RS600_MC_PT0_CONTEXT0_DEFAULT_READ_ADDR 0x11c
+#define RS600_MC_PT0_CONTEXT0_FLAT_BASE_ADDR    0x12c
+#define RS600_MC_PT0_CONTEXT0_FLAT_START_ADDR   0x13c
+#define RS600_MC_PT0_CONTEXT0_FLAT_END_ADDR     0x14c
+#define RS600_MC_PT0_CLIENT0_CNTL               0x16c
+#       define RS600_ENABLE_TRANSLATION_MODE_OVERRIDE       (1 << 0)
+#       define RS600_TRANSLATION_MODE_OVERRIDE              (1 << 1)
+#       define RS600_SYSTEM_ACCESS_MODE_MASK                (3 << 8)
+#       define RS600_SYSTEM_ACCESS_MODE_PA_ONLY             (0 << 8)
+#       define RS600_SYSTEM_ACCESS_MODE_USE_SYS_MAP         (1 << 8)
+#       define RS600_SYSTEM_ACCESS_MODE_IN_SYS              (2 << 8)
+#       define RS600_SYSTEM_ACCESS_MODE_NOT_IN_SYS          (3 << 8)
+#       define RS600_SYSTEM_APERTURE_UNMAPPED_ACCESS_PASSTHROUGH        (0 << 10)
+#       define RS600_SYSTEM_APERTURE_UNMAPPED_ACCESS_DEFAULT_PAGE       (1 << 10)
+#       define RS600_EFFECTIVE_L1_CACHE_SIZE(x) ((x) << 11)
+#       define RS600_ENABLE_FRAGMENT_PROCESSING (1 << 14)
+#       define RS600_EFFECTIVE_L1_QUEUE_SIZE(x) ((x) << 15)
+#       define RS600_INVALIDATE_L1_TLB          (1 << 20)
+/* rs600/rs690/rs740 */
+#	define RS600_BUS_MASTER_DIS		(1 << 14)
+#	define RS600_MSI_REARM		        (1 << 20)
+/* see RS400_MSI_REARM in AIC_CNTL for rs480 */
+
+
+
+#define RV515_MC_FB_LOCATION		0x01
+#define		RV515_MC_FB_START_MASK		0x0000FFFF
+#define		RV515_MC_FB_START_SHIFT		0
+#define		RV515_MC_FB_TOP_MASK		0xFFFF0000
+#define		RV515_MC_FB_TOP_SHIFT		16
+#define RV515_MC_AGP_LOCATION		0x02
+#define		RV515_MC_AGP_START_MASK		0x0000FFFF
+#define		RV515_MC_AGP_START_SHIFT	0
+#define		RV515_MC_AGP_TOP_MASK		0xFFFF0000
+#define		RV515_MC_AGP_TOP_SHIFT		16
+#define RV515_MC_AGP_BASE		0x03
+#define RV515_MC_AGP_BASE_2		0x04
+
+#define R520_MC_FB_LOCATION		0x04
+#define		R520_MC_FB_START_MASK		0x0000FFFF
+#define		R520_MC_FB_START_SHIFT		0
+#define		R520_MC_FB_TOP_MASK		0xFFFF0000
+#define		R520_MC_FB_TOP_SHIFT		16
+#define R520_MC_AGP_LOCATION		0x05
+#define		R520_MC_AGP_START_MASK		0x0000FFFF
+#define		R520_MC_AGP_START_SHIFT		0
+#define		R520_MC_AGP_TOP_MASK		0xFFFF0000
+#define		R520_MC_AGP_TOP_SHIFT		16
+#define R520_MC_AGP_BASE		0x06
+#define R520_MC_AGP_BASE_2		0x07
+
+
+#define AVIVO_MC_INDEX						0x0070
+#define R520_MC_STATUS 0x00
+#define R520_MC_STATUS_IDLE (1<<1)
+#define RV515_MC_STATUS 0x08
+#define RV515_MC_STATUS_IDLE (1<<4)
+#define RV515_MC_INIT_MISC_LAT_TIMER            0x09
+#define AVIVO_MC_DATA						0x0074
+
+#define R520_MC_IND_INDEX 0x70
+#define R520_MC_IND_WR_EN (1 << 24)
+#define R520_MC_IND_DATA  0x74
+
+#define RV515_MC_CNTL          0x5
+#	define RV515_MEM_NUM_CHANNELS_MASK  0x3
+#define R520_MC_CNTL0          0x8
+#	define R520_MEM_NUM_CHANNELS_MASK  (0x3 << 24)
+#	define R520_MEM_NUM_CHANNELS_SHIFT  24
+#	define R520_MC_CHANNEL_SIZE  (1 << 23)
+
+#define AVIVO_CP_DYN_CNTL                              0x000f /* PLL */
+#       define AVIVO_CP_FORCEON                        (1 << 0)
+#define AVIVO_E2_DYN_CNTL                              0x0011 /* PLL */
+#       define AVIVO_E2_FORCEON                        (1 << 0)
+#define AVIVO_IDCT_DYN_CNTL                            0x0013 /* PLL */
+#       define AVIVO_IDCT_FORCEON                      (1 << 0)
+
+#define AVIVO_HDP_FB_LOCATION 0x134
+
+#define AVIVO_VGA_RENDER_CONTROL				0x0300
+#       define AVIVO_VGA_VSTATUS_CNTL_MASK                      (3 << 16)
+#define AVIVO_D1VGA_CONTROL					0x0330
+#       define AVIVO_DVGA_CONTROL_MODE_ENABLE (1<<0)
+#       define AVIVO_DVGA_CONTROL_TIMING_SELECT (1<<8)
+#       define AVIVO_DVGA_CONTROL_SYNC_POLARITY_SELECT (1<<9)
+#       define AVIVO_DVGA_CONTROL_OVERSCAN_TIMING_SELECT (1<<10)
+#       define AVIVO_DVGA_CONTROL_OVERSCAN_COLOR_EN (1<<16)
+#       define AVIVO_DVGA_CONTROL_ROTATE (1<<24)
+#define AVIVO_D2VGA_CONTROL					0x0338
+
+#define AVIVO_EXT1_PPLL_REF_DIV_SRC                             0x400
+#define AVIVO_EXT1_PPLL_REF_DIV                                 0x404
+#define AVIVO_EXT1_PPLL_UPDATE_LOCK                             0x408
+#define AVIVO_EXT1_PPLL_UPDATE_CNTL                             0x40c
+
+#define AVIVO_EXT2_PPLL_REF_DIV_SRC                             0x410
+#define AVIVO_EXT2_PPLL_REF_DIV                                 0x414
+#define AVIVO_EXT2_PPLL_UPDATE_LOCK                             0x418
+#define AVIVO_EXT2_PPLL_UPDATE_CNTL                             0x41c
+
+#define AVIVO_EXT1_PPLL_FB_DIV                                   0x430
+#define AVIVO_EXT2_PPLL_FB_DIV                                   0x434
+
+#define AVIVO_EXT1_PPLL_POST_DIV_SRC                                 0x438
+#define AVIVO_EXT1_PPLL_POST_DIV                                     0x43c
+
+#define AVIVO_EXT2_PPLL_POST_DIV_SRC                                 0x440
+#define AVIVO_EXT2_PPLL_POST_DIV                                     0x444
+
+#define AVIVO_EXT1_PPLL_CNTL                                    0x448
+#define AVIVO_EXT2_PPLL_CNTL                                    0x44c
+
+#define AVIVO_P1PLL_CNTL                                        0x450
+#define AVIVO_P2PLL_CNTL                                        0x454
+#define AVIVO_P1PLL_INT_SS_CNTL                                 0x458
+#define AVIVO_P2PLL_INT_SS_CNTL                                 0x45c
+#define AVIVO_P1PLL_TMDSA_CNTL                                  0x460
+#define AVIVO_P2PLL_LVTMA_CNTL                                  0x464
+
+#define AVIVO_PCLK_CRTC1_CNTL                                   0x480
+#define AVIVO_PCLK_CRTC2_CNTL                                   0x484
+
+#define AVIVO_D1CRTC_H_TOTAL					0x6000
+#define AVIVO_D1CRTC_H_BLANK_START_END                          0x6004
+#define AVIVO_D1CRTC_H_SYNC_A                                   0x6008
+#define AVIVO_D1CRTC_H_SYNC_A_CNTL                              0x600c
+#define AVIVO_D1CRTC_H_SYNC_B                                   0x6010
+#define AVIVO_D1CRTC_H_SYNC_B_CNTL                              0x6014
+
+#define AVIVO_D1CRTC_V_TOTAL					0x6020
+#define AVIVO_D1CRTC_V_BLANK_START_END                          0x6024
+#define AVIVO_D1CRTC_V_SYNC_A                                   0x6028
+#define AVIVO_D1CRTC_V_SYNC_A_CNTL                              0x602c
+#define AVIVO_D1CRTC_V_SYNC_B                                   0x6030
+#define AVIVO_D1CRTC_V_SYNC_B_CNTL                              0x6034
+
+#define AVIVO_D1CRTC_CONTROL                                    0x6080
+#       define AVIVO_CRTC_EN                                    (1 << 0)
+#define AVIVO_D1CRTC_BLANK_CONTROL                              0x6084
+#define AVIVO_D1CRTC_INTERLACE_CONTROL                          0x6088
+#define AVIVO_D1CRTC_INTERLACE_STATUS                           0x608c
+#define AVIVO_D1CRTC_STEREO_CONTROL                             0x60c4
+
+/* master controls */
+#define AVIVO_DC_CRTC_MASTER_EN                                 0x60f8
+#define AVIVO_DC_CRTC_TV_CONTROL                                0x60fc
+
+#define AVIVO_D1GRPH_ENABLE                                     0x6100
+#define AVIVO_D1GRPH_CONTROL                                    0x6104
+#       define AVIVO_D1GRPH_CONTROL_DEPTH_8BPP                  (0 << 0)
+#       define AVIVO_D1GRPH_CONTROL_DEPTH_16BPP                 (1 << 0)
+#       define AVIVO_D1GRPH_CONTROL_DEPTH_32BPP                 (2 << 0)
+#       define AVIVO_D1GRPH_CONTROL_DEPTH_64BPP                 (3 << 0)
+
+#       define AVIVO_D1GRPH_CONTROL_8BPP_INDEXED                (0 << 8)
+
+#       define AVIVO_D1GRPH_CONTROL_16BPP_ARGB1555              (0 << 8)
+#       define AVIVO_D1GRPH_CONTROL_16BPP_RGB565                (1 << 8)
+#       define AVIVO_D1GRPH_CONTROL_16BPP_ARGB4444              (2 << 8)
+#       define AVIVO_D1GRPH_CONTROL_16BPP_AI88                  (3 << 8)
+#       define AVIVO_D1GRPH_CONTROL_16BPP_MONO16                (4 << 8)
+
+#       define AVIVO_D1GRPH_CONTROL_32BPP_ARGB8888              (0 << 8)
+#       define AVIVO_D1GRPH_CONTROL_32BPP_ARGB2101010           (1 << 8)
+#       define AVIVO_D1GRPH_CONTROL_32BPP_DIGITAL               (2 << 8)
+#       define AVIVO_D1GRPH_CONTROL_32BPP_8B_ARGB2101010        (3 << 8)
+
+
+#       define AVIVO_D1GRPH_CONTROL_64BPP_ARGB16161616          (0 << 8)
+
+#       define AVIVO_D1GRPH_SWAP_RB                             (1 << 16)
+#       define AVIVO_D1GRPH_TILED                               (1 << 20)
+#       define AVIVO_D1GRPH_MACRO_ADDRESS_MODE                  (1 << 21)
+
+#define AVIVO_D1GRPH_LUT_SEL                                    0x6108
+#define AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS                    0x6110
+#define AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS                  0x6118
+#define AVIVO_D1GRPH_PITCH                                      0x6120
+#define AVIVO_D1GRPH_SURFACE_OFFSET_X                           0x6124
+#define AVIVO_D1GRPH_SURFACE_OFFSET_Y                           0x6128
+#define AVIVO_D1GRPH_X_START                                    0x612c
+#define AVIVO_D1GRPH_Y_START                                    0x6130
+#define AVIVO_D1GRPH_X_END                                      0x6134
+#define AVIVO_D1GRPH_Y_END                                      0x6138
+#define AVIVO_D1GRPH_UPDATE                                     0x6144
+#       define AVIVO_D1GRPH_UPDATE_LOCK                         (1 << 16)
+#define AVIVO_D1GRPH_FLIP_CONTROL                               0x6148
+
+#define AVIVO_D1CUR_CONTROL                     0x6400
+#       define AVIVO_D1CURSOR_EN                (1 << 0)
+#       define AVIVO_D1CURSOR_MODE_SHIFT        8
+#       define AVIVO_D1CURSOR_MODE_MASK         (3 << 8)
+#       define AVIVO_D1CURSOR_MODE_24BPP        2
+#define AVIVO_D1CUR_SURFACE_ADDRESS             0x6408
+#define AVIVO_D1CUR_SIZE                        0x6410
+#define AVIVO_D1CUR_POSITION                    0x6414
+#define AVIVO_D1CUR_HOT_SPOT                    0x6418
+#define AVIVO_D1CUR_UPDATE                      0x6424
+#       define AVIVO_D1CURSOR_UPDATE_LOCK       (1 << 16)
+
+#define AVIVO_DC_LUT_RW_SELECT                  0x6480
+#define AVIVO_DC_LUT_RW_MODE                    0x6484
+#define AVIVO_DC_LUT_RW_INDEX                   0x6488
+#define AVIVO_DC_LUT_SEQ_COLOR                  0x648c
+#define AVIVO_DC_LUT_PWL_DATA                   0x6490
+#define AVIVO_DC_LUT_30_COLOR                   0x6494
+#define AVIVO_DC_LUT_READ_PIPE_SELECT           0x6498
+#define AVIVO_DC_LUT_WRITE_EN_MASK              0x649c
+#define AVIVO_DC_LUT_AUTOFILL                   0x64a0
+
+#define AVIVO_DC_LUTA_CONTROL                   0x64c0
+#define AVIVO_DC_LUTA_BLACK_OFFSET_BLUE         0x64c4
+#define AVIVO_DC_LUTA_BLACK_OFFSET_GREEN        0x64c8
+#define AVIVO_DC_LUTA_BLACK_OFFSET_RED          0x64cc
+#define AVIVO_DC_LUTA_WHITE_OFFSET_BLUE         0x64d0
+#define AVIVO_DC_LUTA_WHITE_OFFSET_GREEN        0x64d4
+#define AVIVO_DC_LUTA_WHITE_OFFSET_RED          0x64d8
+
+#define AVIVO_DC_LB_MEMORY_SPLIT                0x6520
+#       define AVIVO_DC_LB_MEMORY_SPLIT_MASK    0x3
+#       define AVIVO_DC_LB_MEMORY_SPLIT_SHIFT   0
+#       define AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF  0
+#       define AVIVO_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q    1
+#       define AVIVO_DC_LB_MEMORY_SPLIT_D1_ONLY        2
+#       define AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q    3
+#       define AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE (1 << 2)
+#       define AVIVO_DC_LB_DISP1_END_ADR_SHIFT  4
+#       define AVIVO_DC_LB_DISP1_END_ADR_MASK   0x7ff
+
+#define R500_DxMODE_INT_MASK 0x6540
+#define R500_D1MODE_INT_MASK (1<<0)
+#define R500_D2MODE_INT_MASK (1<<8)
+
+#define AVIVO_D1MODE_DATA_FORMAT                0x6528
+#       define AVIVO_D1MODE_INTERLEAVE_EN       (1 << 0)
+#define AVIVO_D1MODE_DESKTOP_HEIGHT             0x652C
+#define AVIVO_D1MODE_VIEWPORT_START             0x6580
+#define AVIVO_D1MODE_VIEWPORT_SIZE              0x6584
+#define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6588
+#define AVIVO_D1MODE_EXT_OVERSCAN_TOP_BOTTOM    0x658c
+
+#define AVIVO_D1SCL_SCALER_ENABLE               0x6590
+#define AVIVO_D1SCL_SCALER_TAP_CONTROL		0x6594
+#define AVIVO_D1SCL_UPDATE                      0x65cc
+#       define AVIVO_D1SCL_UPDATE_LOCK          (1 << 16)
+
+/* second crtc */
+#define AVIVO_D2CRTC_H_TOTAL					0x6800
+#define AVIVO_D2CRTC_H_BLANK_START_END                          0x6804
+#define AVIVO_D2CRTC_H_SYNC_A                                   0x6808
+#define AVIVO_D2CRTC_H_SYNC_A_CNTL                              0x680c
+#define AVIVO_D2CRTC_H_SYNC_B                                   0x6810
+#define AVIVO_D2CRTC_H_SYNC_B_CNTL                              0x6814
+
+#define AVIVO_D2CRTC_V_TOTAL					0x6820
+#define AVIVO_D2CRTC_V_BLANK_START_END                          0x6824
+#define AVIVO_D2CRTC_V_SYNC_A                                   0x6828
+#define AVIVO_D2CRTC_V_SYNC_A_CNTL                              0x682c
+#define AVIVO_D2CRTC_V_SYNC_B                                   0x6830
+#define AVIVO_D2CRTC_V_SYNC_B_CNTL                              0x6834
+
+#define AVIVO_D2CRTC_CONTROL                                    0x6880
+#define AVIVO_D2CRTC_BLANK_CONTROL                              0x6884
+#define AVIVO_D2CRTC_INTERLACE_CONTROL                          0x6888
+#define AVIVO_D2CRTC_INTERLACE_STATUS                           0x688c
+#define AVIVO_D2CRTC_STEREO_CONTROL                             0x68c4
+
+#define AVIVO_D2GRPH_ENABLE                                     0x6900
+#define AVIVO_D2GRPH_CONTROL                                    0x6904
+#define AVIVO_D2GRPH_LUT_SEL                                    0x6908
+#define AVIVO_D2GRPH_PRIMARY_SURFACE_ADDRESS                    0x6910
+#define AVIVO_D2GRPH_SECONDARY_SURFACE_ADDRESS                  0x6918
+#define AVIVO_D2GRPH_PITCH                                      0x6920
+#define AVIVO_D2GRPH_SURFACE_OFFSET_X                           0x6924
+#define AVIVO_D2GRPH_SURFACE_OFFSET_Y                           0x6928
+#define AVIVO_D2GRPH_X_START                                    0x692c
+#define AVIVO_D2GRPH_Y_START                                    0x6930
+#define AVIVO_D2GRPH_X_END                                      0x6934
+#define AVIVO_D2GRPH_Y_END                                      0x6938
+#define AVIVO_D2GRPH_UPDATE                                     0x6944
+#define AVIVO_D2GRPH_FLIP_CONTROL                               0x6948
+
+#define AVIVO_D2CUR_CONTROL                     0x6c00
+#define AVIVO_D2CUR_SURFACE_ADDRESS             0x6c08
+#define AVIVO_D2CUR_SIZE                        0x6c10
+#define AVIVO_D2CUR_POSITION                    0x6c14
+
+#define AVIVO_D2MODE_VIEWPORT_START             0x6d80
+#define AVIVO_D2MODE_VIEWPORT_SIZE              0x6d84
+#define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6d88
+#define AVIVO_D2MODE_EXT_OVERSCAN_TOP_BOTTOM    0x6d8c
+
+#define AVIVO_D2SCL_SCALER_ENABLE               0x6d90
+#define AVIVO_D2SCL_SCALER_TAP_CONTROL		0x6d94
+
+#define AVIVO_DDIA_BIT_DEPTH_CONTROL				0x7214
+
+#define AVIVO_DACA_ENABLE					0x7800
+#	define AVIVO_DAC_ENABLE				(1 << 0)
+#define AVIVO_DACA_SOURCE_SELECT				0x7804
+#       define AVIVO_DAC_SOURCE_CRTC1                   (0 << 0)
+#       define AVIVO_DAC_SOURCE_CRTC2                   (1 << 0)
+#       define AVIVO_DAC_SOURCE_TV                      (2 << 0)
+
+#define AVIVO_DACA_FORCE_OUTPUT_CNTL				0x783c
+# define AVIVO_DACA_FORCE_OUTPUT_CNTL_FORCE_DATA_EN             (1 << 0)
+# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_SEL_SHIFT            (8)
+# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_SEL_BLUE             (1 << 0)
+# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_SEL_GREEN            (1 << 1)
+# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_SEL_RED              (1 << 2)
+# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_ON_BLANKB_ONLY       (1 << 24)
+#define AVIVO_DACA_POWERDOWN					0x7850
+# define AVIVO_DACA_POWERDOWN_POWERDOWN                         (1 << 0)
+# define AVIVO_DACA_POWERDOWN_BLUE                              (1 << 8)
+# define AVIVO_DACA_POWERDOWN_GREEN                             (1 << 16)
+# define AVIVO_DACA_POWERDOWN_RED                               (1 << 24)
+
+#define AVIVO_DACB_ENABLE					0x7a00
+#define AVIVO_DACB_SOURCE_SELECT				0x7a04
+#define AVIVO_DACB_FORCE_OUTPUT_CNTL				0x7a3c
+# define AVIVO_DACB_FORCE_OUTPUT_CNTL_FORCE_DATA_EN             (1 << 0)
+# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_SEL_SHIFT            (8)
+# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_SEL_BLUE             (1 << 0)
+# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_SEL_GREEN            (1 << 1)
+# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_SEL_RED              (1 << 2)
+# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_ON_BLANKB_ONLY       (1 << 24)
+#define AVIVO_DACB_POWERDOWN					0x7a50
+# define AVIVO_DACB_POWERDOWN_POWERDOWN                         (1 << 0)
+# define AVIVO_DACB_POWERDOWN_BLUE                              (1 << 8)
+# define AVIVO_DACB_POWERDOWN_GREEN                             (1 << 16)
+# define AVIVO_DACB_POWERDOWN_RED
+
+#define AVIVO_TMDSA_CNTL                    0x7880
+#   define AVIVO_TMDSA_CNTL_ENABLE               (1 << 0)
+#   define AVIVO_TMDSA_CNTL_HPD_MASK             (1 << 4)
+#   define AVIVO_TMDSA_CNTL_HPD_SELECT           (1 << 8)
+#   define AVIVO_TMDSA_CNTL_SYNC_PHASE           (1 << 12)
+#   define AVIVO_TMDSA_CNTL_PIXEL_ENCODING       (1 << 16)
+#   define AVIVO_TMDSA_CNTL_DUAL_LINK_ENABLE     (1 << 24)
+#   define AVIVO_TMDSA_CNTL_SWAP                 (1 << 28)
+#define AVIVO_TMDSA_SOURCE_SELECT				0x7884
+/* 78a8 appears to be some kind of (reasonably tolerant) clock?
+ * 78d0 definitely hits the transmitter, definitely clock. */
+/* MYSTERY1 This appears to control dithering? */
+#define AVIVO_TMDSA_BIT_DEPTH_CONTROL		0x7894
+#   define AVIVO_TMDS_BIT_DEPTH_CONTROL_TRUNCATE_EN           (1 << 0)
+#   define AVIVO_TMDS_BIT_DEPTH_CONTROL_TRUNCATE_DEPTH        (1 << 4)
+#   define AVIVO_TMDS_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN     (1 << 8)
+#   define AVIVO_TMDS_BIT_DEPTH_CONTROL_SPATIAL_DITHER_DEPTH  (1 << 12)
+#   define AVIVO_TMDS_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_EN    (1 << 16)
+#   define AVIVO_TMDS_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_DEPTH (1 << 20)
+#   define AVIVO_TMDS_BIT_DEPTH_CONTROL_TEMPORAL_LEVEL        (1 << 24)
+#   define AVIVO_TMDS_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_RESET (1 << 26)
+#define AVIVO_TMDSA_DCBALANCER_CONTROL                  0x78d0
+#   define AVIVO_TMDSA_DCBALANCER_CONTROL_EN                  (1 << 0)
+#   define AVIVO_TMDSA_DCBALANCER_CONTROL_TEST_EN             (1 << 8)
+#   define AVIVO_TMDSA_DCBALANCER_CONTROL_TEST_IN_SHIFT       (16)
+#   define AVIVO_TMDSA_DCBALANCER_CONTROL_FORCE               (1 << 24)
+#define AVIVO_TMDSA_DATA_SYNCHRONIZATION                0x78d8
+#   define AVIVO_TMDSA_DATA_SYNCHRONIZATION_DSYNSEL           (1 << 0)
+#   define AVIVO_TMDSA_DATA_SYNCHRONIZATION_PFREQCHG          (1 << 8)
+#define AVIVO_TMDSA_CLOCK_ENABLE            0x7900
+#define AVIVO_TMDSA_TRANSMITTER_ENABLE              0x7904
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_TX0_ENABLE          (1 << 0)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKC0EN             (1 << 1)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD00EN            (1 << 2)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD01EN            (1 << 3)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD02EN            (1 << 4)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_TX1_ENABLE          (1 << 8)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD10EN            (1 << 10)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD11EN            (1 << 11)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD12EN            (1 << 12)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_TX_ENABLE_HPD_MASK  (1 << 16)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKCEN_HPD_MASK     (1 << 17)
+#   define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKDEN_HPD_MASK     (1 << 18)
+
+#define AVIVO_TMDSA_TRANSMITTER_CONTROL				0x7910
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_PLL_ENABLE	(1 << 0)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_PLL_RESET	(1 << 1)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_PLL_HPD_MASK_SHIFT	(2)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_IDSCKSEL	        (1 << 4)
+#       define AVIVO_TMDSA_TRANSMITTER_CONTROL_BGSLEEP          (1 << 5)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_PLL_PWRUP_SEQ_EN	(1 << 6)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_TMCLK	        (1 << 8)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_TMCLK_FROM_PADS	(1 << 13)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_TDCLK	        (1 << 14)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_TDCLK_FROM_PADS	(1 << 15)
+#       define AVIVO_TMDSA_TRANSMITTER_CONTROL_CLK_PATTERN_SHIFT (16)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_BYPASS_PLL	(1 << 28)
+#       define AVIVO_TMDSA_TRANSMITTER_CONTROL_USE_CLK_DATA     (1 << 29)
+#	define AVIVO_TMDSA_TRANSMITTER_CONTROL_INPUT_TEST_CLK_SEL	(1 << 31)
+
+#define AVIVO_LVTMA_CNTL					0x7a80
+#   define AVIVO_LVTMA_CNTL_ENABLE               (1 << 0)
+#   define AVIVO_LVTMA_CNTL_HPD_MASK             (1 << 4)
+#   define AVIVO_LVTMA_CNTL_HPD_SELECT           (1 << 8)
+#   define AVIVO_LVTMA_CNTL_SYNC_PHASE           (1 << 12)
+#   define AVIVO_LVTMA_CNTL_PIXEL_ENCODING       (1 << 16)
+#   define AVIVO_LVTMA_CNTL_DUAL_LINK_ENABLE     (1 << 24)
+#   define AVIVO_LVTMA_CNTL_SWAP                 (1 << 28)
+#define AVIVO_LVTMA_SOURCE_SELECT                               0x7a84
+#define AVIVO_LVTMA_COLOR_FORMAT                                0x7a88
+#define AVIVO_LVTMA_BIT_DEPTH_CONTROL                           0x7a94
+#   define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_EN           (1 << 0)
+#   define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_DEPTH        (1 << 4)
+#   define AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN     (1 << 8)
+#   define AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_DEPTH  (1 << 12)
+#   define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_EN    (1 << 16)
+#   define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_DEPTH (1 << 20)
+#   define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TEMPORAL_LEVEL        (1 << 24)
+#   define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_RESET (1 << 26)
+
+
+
+#define AVIVO_LVTMA_DCBALANCER_CONTROL                  0x7ad0
+#   define AVIVO_LVTMA_DCBALANCER_CONTROL_EN                  (1 << 0)
+#   define AVIVO_LVTMA_DCBALANCER_CONTROL_TEST_EN             (1 << 8)
+#   define AVIVO_LVTMA_DCBALANCER_CONTROL_TEST_IN_SHIFT       (16)
+#   define AVIVO_LVTMA_DCBALANCER_CONTROL_FORCE               (1 << 24)
+
+#define AVIVO_LVTMA_DATA_SYNCHRONIZATION                0x78d8
+#   define AVIVO_LVTMA_DATA_SYNCHRONIZATION_DSYNSEL           (1 << 0)
+#   define AVIVO_LVTMA_DATA_SYNCHRONIZATION_PFREQCHG          (1 << 8)
+#define R500_LVTMA_CLOCK_ENABLE			0x7b00
+#define R600_LVTMA_CLOCK_ENABLE			0x7b04
+
+#define R500_LVTMA_TRANSMITTER_ENABLE              0x7b04
+#define R600_LVTMA_TRANSMITTER_ENABLE              0x7b08
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKC0EN             (1 << 1)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD00EN            (1 << 2)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD01EN            (1 << 3)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD02EN            (1 << 4)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD03EN            (1 << 5)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKC1EN             (1 << 9)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD10EN            (1 << 10)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD11EN            (1 << 11)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD12EN            (1 << 12)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKCEN_HPD_MASK     (1 << 17)
+#   define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKDEN_HPD_MASK     (1 << 18)
+
+#define R500_LVTMA_TRANSMITTER_CONTROL			        0x7b10
+#define R600_LVTMA_TRANSMITTER_CONTROL			        0x7b14
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_PLL_ENABLE	  (1 << 0)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_PLL_RESET	  (1 << 1)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_PLL_HPD_MASK_SHIFT (2)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_IDSCKSEL	          (1 << 4)
+#       define AVIVO_LVTMA_TRANSMITTER_CONTROL_BGSLEEP            (1 << 5)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_PLL_PWRUP_SEQ_EN	  (1 << 6)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_TMCLK	          (1 << 8)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_TMCLK_FROM_PADS	  (1 << 13)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_TDCLK	          (1 << 14)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_TDCLK_FROM_PADS	  (1 << 15)
+#       define AVIVO_LVTMA_TRANSMITTER_CONTROL_CLK_PATTERN_SHIFT  (16)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_BYPASS_PLL	  (1 << 28)
+#       define AVIVO_LVTMA_TRANSMITTER_CONTROL_USE_CLK_DATA       (1 << 29)
+#	define AVIVO_LVTMA_TRANSMITTER_CONTROL_INPUT_TEST_CLK_SEL (1 << 31)
+
+#define R500_LVTMA_PWRSEQ_CNTL						0x7af0
+#define R600_LVTMA_PWRSEQ_CNTL						0x7af4
+#	define AVIVO_LVTMA_PWRSEQ_EN					    (1 << 0)
+#	define AVIVO_LVTMA_PWRSEQ_PLL_ENABLE_MASK			    (1 << 2)
+#	define AVIVO_LVTMA_PWRSEQ_PLL_RESET_MASK			    (1 << 3)
+#	define AVIVO_LVTMA_PWRSEQ_TARGET_STATE				    (1 << 4)
+#	define AVIVO_LVTMA_SYNCEN					    (1 << 8)
+#	define AVIVO_LVTMA_SYNCEN_OVRD					    (1 << 9)
+#	define AVIVO_LVTMA_SYNCEN_POL					    (1 << 10)
+#	define AVIVO_LVTMA_DIGON					    (1 << 16)
+#	define AVIVO_LVTMA_DIGON_OVRD					    (1 << 17)
+#	define AVIVO_LVTMA_DIGON_POL					    (1 << 18)
+#	define AVIVO_LVTMA_BLON						    (1 << 24)
+#	define AVIVO_LVTMA_BLON_OVRD					    (1 << 25)
+#	define AVIVO_LVTMA_BLON_POL					    (1 << 26)
+
+#define R500_LVTMA_PWRSEQ_STATE                        0x7af4
+#define R600_LVTMA_PWRSEQ_STATE                        0x7af8
+#       define AVIVO_LVTMA_PWRSEQ_STATE_TARGET_STATE_R          (1 << 0)
+#       define AVIVO_LVTMA_PWRSEQ_STATE_DIGON                   (1 << 1)
+#       define AVIVO_LVTMA_PWRSEQ_STATE_SYNCEN                  (1 << 2)
+#       define AVIVO_LVTMA_PWRSEQ_STATE_BLON                    (1 << 3)
+#       define AVIVO_LVTMA_PWRSEQ_STATE_DONE                    (1 << 4)
+#       define AVIVO_LVTMA_PWRSEQ_STATE_STATUS_SHIFT            (8)
+
+#define AVIVO_LVDS_BACKLIGHT_CNTL			0x7af8
+#	define AVIVO_LVDS_BACKLIGHT_CNTL_EN			(1 << 0)
+#	define AVIVO_LVDS_BACKLIGHT_LEVEL_MASK		0x0000ff00
+#	define AVIVO_LVDS_BACKLIGHT_LEVEL_SHIFT		8
+
+#define AVIVO_DVOA_BIT_DEPTH_CONTROL			0x7988
+
+#define AVIVO_GPIO_0                        0x7e30
+#define AVIVO_GPIO_1                        0x7e40
+#define AVIVO_GPIO_2                        0x7e50
+#define AVIVO_GPIO_3                        0x7e60
+
+#define AVIVO_DC_GPIO_HPD_Y                 0x7e9c
+
+#define AVIVO_I2C_STATUS					0x7d30
+#	define AVIVO_I2C_STATUS_DONE				(1 << 0)
+#	define AVIVO_I2C_STATUS_NACK				(1 << 1)
+#	define AVIVO_I2C_STATUS_HALT				(1 << 2)
+#	define AVIVO_I2C_STATUS_GO				(1 << 3)
+#	define AVIVO_I2C_STATUS_MASK				0x7
+/* If radeon_mm_i2c is to be believed, this is HALT, NACK, and maybe
+ * DONE? */
+#	define AVIVO_I2C_STATUS_CMD_RESET			0x7
+#	define AVIVO_I2C_STATUS_CMD_WAIT			(1 << 3)
+#define AVIVO_I2C_STOP						0x7d34
+#define AVIVO_I2C_START_CNTL				0x7d38
+#	define AVIVO_I2C_START						(1 << 8)
+#	define AVIVO_I2C_CONNECTOR0					(0 << 16)
+#	define AVIVO_I2C_CONNECTOR1					(1 << 16)
+#define R520_I2C_START (1<<0)
+#define R520_I2C_STOP (1<<1)
+#define R520_I2C_RX (1<<2)
+#define R520_I2C_EN (1<<8)
+#define R520_I2C_DDC1 (0<<16)
+#define R520_I2C_DDC2 (1<<16)
+#define R520_I2C_DDC3 (2<<16)
+#define R520_I2C_DDC_MASK (3<<16)
+#define AVIVO_I2C_CONTROL2					0x7d3c
+#	define AVIVO_I2C_7D3C_SIZE_SHIFT			8
+#	define AVIVO_I2C_7D3C_SIZE_MASK				(0xf << 8)
+#define AVIVO_I2C_CONTROL3						0x7d40
+/* Reading is done 4 bytes at a time: read the bottom 8 bits from
+ * 7d44, four times in a row.
+ * Writing is a little more complex.  First write DATA with
+ * 0xnnnnnnzz, then 0xnnnnnnyy, where nnnnnn is some non-deterministic
+ * magic number, zz is, I think, the slave address, and yy is the byte
+ * you want to write. */
+#define AVIVO_I2C_DATA						0x7d44
+#define R520_I2C_ADDR_COUNT_MASK (0x7)
+#define R520_I2C_DATA_COUNT_SHIFT (8)
+#define R520_I2C_DATA_COUNT_MASK (0xF00)
+#define AVIVO_I2C_CNTL						0x7d50
+#	define AVIVO_I2C_EN							(1 << 0)
+#	define AVIVO_I2C_RESET						(1 << 8)
+
+#endif
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
new file mode 100644
index 00000000000..570a244bd88
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* r520,rv530,rv560,rv570,r580 depends on : */
+void r100_hdp_reset(struct radeon_device *rdev);
+int rv370_pcie_gart_enable(struct radeon_device *rdev);
+void rv370_pcie_gart_disable(struct radeon_device *rdev);
+void r420_pipes_init(struct radeon_device *rdev);
+void rs600_mc_disable_clients(struct radeon_device *rdev);
+void rs600_disable_vga(struct radeon_device *rdev);
+int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
+int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
+
+/* This files gather functions specifics to:
+ * r520,rv530,rv560,rv570,r580
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+void r520_gpu_init(struct radeon_device *rdev);
+int r520_mc_wait_for_idle(struct radeon_device *rdev);
+
+
+/*
+ * MC
+ */
+int r520_mc_init(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int r;
+
+	if (r100_debugfs_rbbm_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+	}
+	if (rv515_debugfs_pipes_info_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for pipes !\n");
+	}
+	if (rv515_debugfs_ga_info_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for pipes !\n");
+	}
+
+	r520_gpu_init(rdev);
+	rv370_pcie_gart_disable(rdev);
+
+	/* Setup GPU memory space */
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	rdev->mc.gtt_location = 0xFFFFFFFFUL;
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r) {
+			printk(KERN_WARNING "[drm] Disabling AGP\n");
+			rdev->flags &= ~RADEON_IS_AGP;
+			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+		} else {
+			rdev->mc.gtt_location = rdev->mc.agp_base;
+		}
+	}
+	r = radeon_mc_setup(rdev);
+	if (r) {
+		return r;
+	}
+
+	/* Program GPU memory space */
+	rs600_mc_disable_clients(rdev);
+	if (r520_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	/* Write VRAM size in case we are limiting it */
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
+	tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32_MC(R520_MC_FB_LOCATION, tmp);
+	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+	WREG32(0x310, rdev->mc.vram_location);
+	if (rdev->flags & RADEON_IS_AGP) {
+		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+		tmp = REG_SET(R520_MC_AGP_TOP, tmp >> 16);
+		tmp |= REG_SET(R520_MC_AGP_START, rdev->mc.gtt_location >> 16);
+		WREG32_MC(R520_MC_AGP_LOCATION, tmp);
+		WREG32_MC(R520_MC_AGP_BASE, rdev->mc.agp_base);
+		WREG32_MC(R520_MC_AGP_BASE_2, 0);
+	} else {
+		WREG32_MC(R520_MC_AGP_LOCATION, 0x0FFFFFFF);
+		WREG32_MC(R520_MC_AGP_BASE, 0);
+		WREG32_MC(R520_MC_AGP_BASE_2, 0);
+	}
+	return 0;
+}
+
+void r520_mc_fini(struct radeon_device *rdev)
+{
+	rv370_pcie_gart_disable(rdev);
+	radeon_gart_table_vram_free(rdev);
+	radeon_gart_fini(rdev);
+}
+
+
+/*
+ * Global GPU functions
+ */
+void r520_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+int r520_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		/* read MC_STATUS */
+		tmp = RREG32_MC(R520_MC_STATUS);
+		if (tmp & R520_MC_STATUS_IDLE) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
+void r520_gpu_init(struct radeon_device *rdev)
+{
+	unsigned pipe_select_current, gb_pipe_select, tmp;
+
+	r100_hdp_reset(rdev);
+	rs600_disable_vga(rdev);
+	/*
+	 * DST_PIPE_CONFIG		0x170C
+	 * GB_TILE_CONFIG		0x4018
+	 * GB_FIFO_SIZE			0x4024
+	 * GB_PIPE_SELECT		0x402C
+	 * GB_PIPE_SELECT2              0x4124
+	 *	Z_PIPE_SHIFT			0
+	 *	Z_PIPE_MASK			0x000000003
+	 * GB_FIFO_SIZE2                0x4128
+	 *	SC_SFIFO_SIZE_SHIFT		0
+	 *	SC_SFIFO_SIZE_MASK		0x000000003
+	 *	SC_MFIFO_SIZE_SHIFT		2
+	 *	SC_MFIFO_SIZE_MASK		0x00000000C
+	 *	FG_SFIFO_SIZE_SHIFT		4
+	 *	FG_SFIFO_SIZE_MASK		0x000000030
+	 *	ZB_MFIFO_SIZE_SHIFT		6
+	 *	ZB_MFIFO_SIZE_MASK		0x0000000C0
+	 * GA_ENHANCE			0x4274
+	 * SU_REG_DEST			0x42C8
+	 */
+	/* workaround for RV530 */
+	if (rdev->family == CHIP_RV530) {
+		WREG32(0x4124, 1);
+		WREG32(0x4128, 0xFF);
+	}
+	r420_pipes_init(rdev);
+	gb_pipe_select = RREG32(0x402C);
+	tmp = RREG32(0x170C);
+	pipe_select_current = (tmp >> 2) & 3;
+	tmp = (1 << pipe_select_current) |
+	      (((gb_pipe_select >> 8) & 0xF) << 4);
+	WREG32_PLL(0x000D, tmp);
+	if (r520_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+}
+
+
+/*
+ * VRAM info
+ */
+static void r520_vram_get_type(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	rdev->mc.vram_width = 128;
+	rdev->mc.vram_is_ddr = true;
+	tmp = RREG32_MC(R520_MC_CNTL0);
+	switch ((tmp & R520_MEM_NUM_CHANNELS_MASK) >> R520_MEM_NUM_CHANNELS_SHIFT) {
+	case 0:
+		rdev->mc.vram_width = 32;
+		break;
+	case 1:
+		rdev->mc.vram_width = 64;
+		break;
+	case 2:
+		rdev->mc.vram_width = 128;
+		break;
+	case 3:
+		rdev->mc.vram_width = 256;
+		break;
+	default:
+		rdev->mc.vram_width = 128;
+		break;
+	}
+	if (tmp & R520_MC_CHANNEL_SIZE)
+		rdev->mc.vram_width *= 2;
+}
+
+void r520_vram_info(struct radeon_device *rdev)
+{
+	r520_vram_get_type(rdev);
+	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+}
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
new file mode 100644
index 00000000000..c45559fc97f
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* r600,rv610,rv630,rv620,rv635,rv670 depends on : */
+void rs600_mc_disable_clients(struct radeon_device *rdev);
+
+/* This files gather functions specifics to:
+ * r600,rv610,rv630,rv620,rv635,rv670
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+int r600_mc_wait_for_idle(struct radeon_device *rdev);
+void r600_gpu_init(struct radeon_device *rdev);
+
+
+/*
+ * MC
+ */
+int r600_mc_init(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	r600_gpu_init(rdev);
+
+	/* setup the gart before changing location so we can ask to
+	 * discard unmapped mc request
+	 */
+	/* FIXME: disable out of gart access */
+	tmp = rdev->mc.gtt_location / 4096;
+	tmp = REG_SET(R600_LOGICAL_PAGE_NUMBER, tmp);
+	WREG32(R600_MC_VM_SYSTEM_APERTURE_LOW_ADDR, tmp);
+	tmp = (rdev->mc.gtt_location + rdev->mc.gtt_size) / 4096;
+	tmp = REG_SET(R600_LOGICAL_PAGE_NUMBER, tmp);
+	WREG32(R600_MC_VM_SYSTEM_APERTURE_HIGH_ADDR, tmp);
+
+	rs600_mc_disable_clients(rdev);
+	if (r600_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = REG_SET(R600_MC_FB_TOP, tmp >> 24);
+	tmp |= REG_SET(R600_MC_FB_BASE, rdev->mc.vram_location >> 24);
+	WREG32(R600_MC_VM_FB_LOCATION, tmp);
+	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+	tmp = REG_SET(R600_MC_AGP_TOP, tmp >> 22);
+	WREG32(R600_MC_VM_AGP_TOP, tmp);
+	tmp = REG_SET(R600_MC_AGP_BOT, rdev->mc.gtt_location >> 22);
+	WREG32(R600_MC_VM_AGP_BOT, tmp);
+	return 0;
+}
+
+void r600_mc_fini(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+}
+
+
+/*
+ * Global GPU functions
+ */
+void r600_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+int r600_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+	return 0;
+}
+
+void r600_gpu_init(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+}
+
+
+/*
+ * VRAM info
+ */
+void r600_vram_get_type(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int chansize;
+
+	rdev->mc.vram_width = 128;
+	rdev->mc.vram_is_ddr = true;
+
+	tmp = RREG32(R600_RAMCFG);
+	if (tmp & R600_CHANSIZE_OVERRIDE) {
+		chansize = 16;
+	} else if (tmp & R600_CHANSIZE) {
+		chansize = 64;
+	} else {
+		chansize = 32;
+	}
+	if (rdev->family == CHIP_R600) {
+		rdev->mc.vram_width = 8 * chansize;
+	} else if (rdev->family == CHIP_RV670) {
+		rdev->mc.vram_width = 4 * chansize;
+	} else if ((rdev->family == CHIP_RV610) ||
+			(rdev->family == CHIP_RV620)) {
+		rdev->mc.vram_width = chansize;
+	} else if ((rdev->family == CHIP_RV630) ||
+			(rdev->family == CHIP_RV635)) {
+		rdev->mc.vram_width = 2 * chansize;
+	}
+}
+
+void r600_vram_info(struct radeon_device *rdev)
+{
+	r600_vram_get_type(rdev);
+	rdev->mc.vram_size = RREG32(R600_CONFIG_MEMSIZE);
+
+	/* Could aper size report 0 ? */
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+}
+
+/*
+ * Indirect registers accessor
+ */
+uint32_t r600_pciep_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t r;
+
+	WREG32(R600_PCIE_PORT_INDEX, ((reg) & 0xff));
+	(void)RREG32(R600_PCIE_PORT_INDEX);
+	r = RREG32(R600_PCIE_PORT_DATA);
+	return r;
+}
+
+void r600_pciep_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG32(R600_PCIE_PORT_INDEX, ((reg) & 0xff));
+	(void)RREG32(R600_PCIE_PORT_INDEX);
+	WREG32(R600_PCIE_PORT_DATA, (v));
+	(void)RREG32(R600_PCIE_PORT_DATA);
+}
diff --git a/drivers/gpu/drm/radeon/r600_reg.h b/drivers/gpu/drm/radeon/r600_reg.h
new file mode 100644
index 00000000000..e2d1f5f33f7
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r600_reg.h
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __R600_REG_H__
+#define __R600_REG_H__
+
+#define R600_PCIE_PORT_INDEX                0x0038
+#define R600_PCIE_PORT_DATA                 0x003c
+
+#define R600_MC_VM_FB_LOCATION			0x2180
+#define		R600_MC_FB_BASE_MASK			0x0000FFFF
+#define		R600_MC_FB_BASE_SHIFT			0
+#define		R600_MC_FB_TOP_MASK			0xFFFF0000
+#define		R600_MC_FB_TOP_SHIFT			16
+#define R600_MC_VM_AGP_TOP			0x2184
+#define		R600_MC_AGP_TOP_MASK			0x0003FFFF
+#define		R600_MC_AGP_TOP_SHIFT			0
+#define R600_MC_VM_AGP_BOT			0x2188
+#define		R600_MC_AGP_BOT_MASK			0x0003FFFF
+#define		R600_MC_AGP_BOT_SHIFT			0
+#define R600_MC_VM_AGP_BASE			0x218c
+#define R600_MC_VM_SYSTEM_APERTURE_LOW_ADDR	0x2190
+#define		R600_LOGICAL_PAGE_NUMBER_MASK		0x000FFFFF
+#define		R600_LOGICAL_PAGE_NUMBER_SHIFT		0
+#define R600_MC_VM_SYSTEM_APERTURE_HIGH_ADDR	0x2194
+#define R600_MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR	0x2198
+
+#define R700_MC_VM_FB_LOCATION			0x2024
+#define		R700_MC_FB_BASE_MASK			0x0000FFFF
+#define		R700_MC_FB_BASE_SHIFT			0
+#define		R700_MC_FB_TOP_MASK			0xFFFF0000
+#define		R700_MC_FB_TOP_SHIFT			16
+#define R700_MC_VM_AGP_TOP			0x2028
+#define		R700_MC_AGP_TOP_MASK			0x0003FFFF
+#define		R700_MC_AGP_TOP_SHIFT			0
+#define R700_MC_VM_AGP_BOT			0x202c
+#define		R700_MC_AGP_BOT_MASK			0x0003FFFF
+#define		R700_MC_AGP_BOT_SHIFT			0
+#define R700_MC_VM_AGP_BASE			0x2030
+#define R700_MC_VM_SYSTEM_APERTURE_LOW_ADDR	0x2034
+#define		R700_LOGICAL_PAGE_NUMBER_MASK		0x000FFFFF
+#define		R700_LOGICAL_PAGE_NUMBER_SHIFT		0
+#define R700_MC_VM_SYSTEM_APERTURE_HIGH_ADDR	0x2038
+#define R700_MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR	0x203c
+
+#define R600_RAMCFG				       0x2408
+#       define R600_CHANSIZE                           (1 << 7)
+#       define R600_CHANSIZE_OVERRIDE                  (1 << 10)
+
+
+#define R600_GENERAL_PWRMGT                                        0x618
+#	define R600_OPEN_DRAIN_PADS				   (1 << 11)
+
+#define R600_LOWER_GPIO_ENABLE                                     0x710
+#define R600_CTXSW_VID_LOWER_GPIO_CNTL                             0x718
+#define R600_HIGH_VID_LOWER_GPIO_CNTL                              0x71c
+#define R600_MEDIUM_VID_LOWER_GPIO_CNTL                            0x720
+#define R600_LOW_VID_LOWER_GPIO_CNTL                               0x724
+
+
+
+#define R600_HDP_NONSURFACE_BASE                                0x2c04
+
+#define R600_BUS_CNTL                                           0x5420
+#define R600_CONFIG_CNTL                                        0x5424
+#define R600_CONFIG_MEMSIZE                                     0x5428
+#define R600_CONFIG_F0_BASE                                     0x542C
+#define R600_CONFIG_APER_SIZE                                   0x5430
+
+#define R600_ROM_CNTL                              0x1600
+#       define R600_SCK_OVERWRITE                  (1 << 1)
+#       define R600_SCK_PRESCALE_CRYSTAL_CLK_SHIFT 28
+#       define R600_SCK_PRESCALE_CRYSTAL_CLK_MASK  (0xf << 28)
+
+#define R600_CG_SPLL_FUNC_CNTL                     0x600
+#       define R600_SPLL_BYPASS_EN                 (1 << 3)
+#define R600_CG_SPLL_STATUS                        0x60c
+#       define R600_SPLL_CHG_STATUS                (1 << 1)
+
+#define R600_BIOS_0_SCRATCH               0x1724
+#define R600_BIOS_1_SCRATCH               0x1728
+#define R600_BIOS_2_SCRATCH               0x172c
+#define R600_BIOS_3_SCRATCH               0x1730
+#define R600_BIOS_4_SCRATCH               0x1734
+#define R600_BIOS_5_SCRATCH               0x1738
+#define R600_BIOS_6_SCRATCH               0x173c
+#define R600_BIOS_7_SCRATCH               0x1740
+
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
new file mode 100644
index 00000000000..c3f24cc5600
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -0,0 +1,793 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RADEON_H__
+#define __RADEON_H__
+
+#include "radeon_object.h"
+
+/* TODO: Here are things that needs to be done :
+ *	- surface allocator & initializer : (bit like scratch reg) should
+ *	  initialize HDP_ stuff on RS600, R600, R700 hw, well anythings
+ *	  related to surface
+ *	- WB : write back stuff (do it bit like scratch reg things)
+ *	- Vblank : look at Jesse's rework and what we should do
+ *	- r600/r700: gart & cp
+ *	- cs : clean cs ioctl use bitmap & things like that.
+ *	- power management stuff
+ *	- Barrier in gart code
+ *	- Unmappabled vram ?
+ *	- TESTING, TESTING, TESTING
+ */
+
+#include <asm/atomic.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/kref.h>
+
+#include "radeon_mode.h"
+#include "radeon_reg.h"
+
+
+/*
+ * Modules parameters.
+ */
+extern int radeon_no_wb;
+extern int radeon_modeset;
+extern int radeon_dynclks;
+extern int radeon_r4xx_atom;
+extern int radeon_agpmode;
+extern int radeon_vram_limit;
+extern int radeon_gart_size;
+extern int radeon_benchmarking;
+extern int radeon_connector_table;
+
+/*
+ * Copy from radeon_drv.h so we don't have to include both and have conflicting
+ * symbol;
+ */
+#define RADEON_MAX_USEC_TIMEOUT		100000	/* 100 ms */
+#define RADEON_IB_POOL_SIZE		16
+#define RADEON_DEBUGFS_MAX_NUM_FILES	32
+#define RADEONFB_CONN_LIMIT		4
+
+enum radeon_family {
+	CHIP_R100,
+	CHIP_RV100,
+	CHIP_RS100,
+	CHIP_RV200,
+	CHIP_RS200,
+	CHIP_R200,
+	CHIP_RV250,
+	CHIP_RS300,
+	CHIP_RV280,
+	CHIP_R300,
+	CHIP_R350,
+	CHIP_RV350,
+	CHIP_RV380,
+	CHIP_R420,
+	CHIP_R423,
+	CHIP_RV410,
+	CHIP_RS400,
+	CHIP_RS480,
+	CHIP_RS600,
+	CHIP_RS690,
+	CHIP_RS740,
+	CHIP_RV515,
+	CHIP_R520,
+	CHIP_RV530,
+	CHIP_RV560,
+	CHIP_RV570,
+	CHIP_R580,
+	CHIP_R600,
+	CHIP_RV610,
+	CHIP_RV630,
+	CHIP_RV620,
+	CHIP_RV635,
+	CHIP_RV670,
+	CHIP_RS780,
+	CHIP_RV770,
+	CHIP_RV730,
+	CHIP_RV710,
+	CHIP_LAST,
+};
+
+enum radeon_chip_flags {
+	RADEON_FAMILY_MASK = 0x0000ffffUL,
+	RADEON_FLAGS_MASK = 0xffff0000UL,
+	RADEON_IS_MOBILITY = 0x00010000UL,
+	RADEON_IS_IGP = 0x00020000UL,
+	RADEON_SINGLE_CRTC = 0x00040000UL,
+	RADEON_IS_AGP = 0x00080000UL,
+	RADEON_HAS_HIERZ = 0x00100000UL,
+	RADEON_IS_PCIE = 0x00200000UL,
+	RADEON_NEW_MEMMAP = 0x00400000UL,
+	RADEON_IS_PCI = 0x00800000UL,
+	RADEON_IS_IGPGART = 0x01000000UL,
+};
+
+
+/*
+ * Errata workarounds.
+ */
+enum radeon_pll_errata {
+	CHIP_ERRATA_R300_CG             = 0x00000001,
+	CHIP_ERRATA_PLL_DUMMYREADS      = 0x00000002,
+	CHIP_ERRATA_PLL_DELAY           = 0x00000004
+};
+
+
+struct radeon_device;
+
+
+/*
+ * BIOS.
+ */
+bool radeon_get_bios(struct radeon_device *rdev);
+
+/*
+ * Clocks
+ */
+
+struct radeon_clock {
+	struct radeon_pll p1pll;
+	struct radeon_pll p2pll;
+	struct radeon_pll spll;
+	struct radeon_pll mpll;
+	/* 10 Khz units */
+	uint32_t default_mclk;
+	uint32_t default_sclk;
+};
+
+/*
+ * Fences.
+ */
+struct radeon_fence_driver {
+	uint32_t			scratch_reg;
+	atomic_t			seq;
+	uint32_t			last_seq;
+	unsigned long			count_timeout;
+	wait_queue_head_t		queue;
+	rwlock_t			lock;
+	struct list_head		created;
+	struct list_head		emited;
+	struct list_head		signaled;
+};
+
+struct radeon_fence {
+	struct radeon_device		*rdev;
+	struct kref			kref;
+	struct list_head		list;
+	/* protected by radeon_fence.lock */
+	uint32_t			seq;
+	unsigned long			timeout;
+	bool				emited;
+	bool				signaled;
+};
+
+int radeon_fence_driver_init(struct radeon_device *rdev);
+void radeon_fence_driver_fini(struct radeon_device *rdev);
+int radeon_fence_create(struct radeon_device *rdev, struct radeon_fence **fence);
+int radeon_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence);
+void radeon_fence_process(struct radeon_device *rdev);
+bool radeon_fence_signaled(struct radeon_fence *fence);
+int radeon_fence_wait(struct radeon_fence *fence, bool interruptible);
+int radeon_fence_wait_next(struct radeon_device *rdev);
+int radeon_fence_wait_last(struct radeon_device *rdev);
+struct radeon_fence *radeon_fence_ref(struct radeon_fence *fence);
+void radeon_fence_unref(struct radeon_fence **fence);
+
+
+/*
+ * Radeon buffer.
+ */
+struct radeon_object;
+
+struct radeon_object_list {
+	struct list_head	list;
+	struct radeon_object	*robj;
+	uint64_t		gpu_offset;
+	unsigned		rdomain;
+	unsigned		wdomain;
+};
+
+int radeon_object_init(struct radeon_device *rdev);
+void radeon_object_fini(struct radeon_device *rdev);
+int radeon_object_create(struct radeon_device *rdev,
+			 struct drm_gem_object *gobj,
+			 unsigned long size,
+			 bool kernel,
+			 uint32_t domain,
+			 bool interruptible,
+			 struct radeon_object **robj_ptr);
+int radeon_object_kmap(struct radeon_object *robj, void **ptr);
+void radeon_object_kunmap(struct radeon_object *robj);
+void radeon_object_unref(struct radeon_object **robj);
+int radeon_object_pin(struct radeon_object *robj, uint32_t domain,
+		      uint64_t *gpu_addr);
+void radeon_object_unpin(struct radeon_object *robj);
+int radeon_object_wait(struct radeon_object *robj);
+int radeon_object_evict_vram(struct radeon_device *rdev);
+int radeon_object_mmap(struct radeon_object *robj, uint64_t *offset);
+void radeon_object_force_delete(struct radeon_device *rdev);
+void radeon_object_list_add_object(struct radeon_object_list *lobj,
+				   struct list_head *head);
+int radeon_object_list_validate(struct list_head *head, void *fence);
+void radeon_object_list_unvalidate(struct list_head *head);
+void radeon_object_list_clean(struct list_head *head);
+int radeon_object_fbdev_mmap(struct radeon_object *robj,
+			     struct vm_area_struct *vma);
+unsigned long radeon_object_size(struct radeon_object *robj);
+
+
+/*
+ * GEM objects.
+ */
+struct radeon_gem {
+	struct list_head	objects;
+};
+
+int radeon_gem_init(struct radeon_device *rdev);
+void radeon_gem_fini(struct radeon_device *rdev);
+int radeon_gem_object_create(struct radeon_device *rdev, int size,
+			     int alignment, int initial_domain,
+			     bool discardable, bool kernel,
+			     bool interruptible,
+			     struct drm_gem_object **obj);
+int radeon_gem_object_pin(struct drm_gem_object *obj, uint32_t pin_domain,
+			  uint64_t *gpu_addr);
+void radeon_gem_object_unpin(struct drm_gem_object *obj);
+
+
+/*
+ * GART structures, functions & helpers
+ */
+struct radeon_mc;
+
+struct radeon_gart_table_ram {
+	volatile uint32_t		*ptr;
+};
+
+struct radeon_gart_table_vram {
+	struct radeon_object		*robj;
+	volatile uint32_t		*ptr;
+};
+
+union radeon_gart_table {
+	struct radeon_gart_table_ram	ram;
+	struct radeon_gart_table_vram	vram;
+};
+
+struct radeon_gart {
+	dma_addr_t			table_addr;
+	unsigned			num_gpu_pages;
+	unsigned			num_cpu_pages;
+	unsigned			table_size;
+	union radeon_gart_table		table;
+	struct page			**pages;
+	dma_addr_t			*pages_addr;
+	bool				ready;
+};
+
+int radeon_gart_table_ram_alloc(struct radeon_device *rdev);
+void radeon_gart_table_ram_free(struct radeon_device *rdev);
+int radeon_gart_table_vram_alloc(struct radeon_device *rdev);
+void radeon_gart_table_vram_free(struct radeon_device *rdev);
+int radeon_gart_init(struct radeon_device *rdev);
+void radeon_gart_fini(struct radeon_device *rdev);
+void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset,
+			int pages);
+int radeon_gart_bind(struct radeon_device *rdev, unsigned offset,
+		     int pages, struct page **pagelist);
+
+
+/*
+ * GPU MC structures, functions & helpers
+ */
+struct radeon_mc {
+	resource_size_t		aper_size;
+	resource_size_t		aper_base;
+	resource_size_t		agp_base;
+	unsigned		gtt_location;
+	unsigned		gtt_size;
+	unsigned		vram_location;
+	unsigned		vram_size;
+	unsigned		vram_width;
+	int			vram_mtrr;
+	bool			vram_is_ddr;
+};
+
+int radeon_mc_setup(struct radeon_device *rdev);
+
+
+/*
+ * GPU scratch registers structures, functions & helpers
+ */
+struct radeon_scratch {
+	unsigned		num_reg;
+	bool			free[32];
+	uint32_t		reg[32];
+};
+
+int radeon_scratch_get(struct radeon_device *rdev, uint32_t *reg);
+void radeon_scratch_free(struct radeon_device *rdev, uint32_t reg);
+
+
+/*
+ * IRQS.
+ */
+struct radeon_irq {
+	bool		installed;
+	bool		sw_int;
+	/* FIXME: use a define max crtc rather than hardcode it */
+	bool		crtc_vblank_int[2];
+};
+
+int radeon_irq_kms_init(struct radeon_device *rdev);
+void radeon_irq_kms_fini(struct radeon_device *rdev);
+
+
+/*
+ * CP & ring.
+ */
+struct radeon_ib {
+	struct list_head	list;
+	unsigned long		idx;
+	uint64_t		gpu_addr;
+	struct radeon_fence	*fence;
+	volatile uint32_t	*ptr;
+	uint32_t		length_dw;
+};
+
+struct radeon_ib_pool {
+	struct mutex		mutex;
+	struct radeon_object	*robj;
+	struct list_head	scheduled_ibs;
+	struct radeon_ib	ibs[RADEON_IB_POOL_SIZE];
+	bool			ready;
+	DECLARE_BITMAP(alloc_bm, RADEON_IB_POOL_SIZE);
+};
+
+struct radeon_cp {
+	struct radeon_object	*ring_obj;
+	volatile uint32_t	*ring;
+	unsigned		rptr;
+	unsigned		wptr;
+	unsigned		wptr_old;
+	unsigned		ring_size;
+	unsigned		ring_free_dw;
+	int			count_dw;
+	uint64_t		gpu_addr;
+	uint32_t		align_mask;
+	uint32_t		ptr_mask;
+	struct mutex		mutex;
+	bool			ready;
+};
+
+int radeon_ib_get(struct radeon_device *rdev, struct radeon_ib **ib);
+void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib);
+int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib);
+int radeon_ib_pool_init(struct radeon_device *rdev);
+void radeon_ib_pool_fini(struct radeon_device *rdev);
+int radeon_ib_test(struct radeon_device *rdev);
+/* Ring access between begin & end cannot sleep */
+void radeon_ring_free_size(struct radeon_device *rdev);
+int radeon_ring_lock(struct radeon_device *rdev, unsigned ndw);
+void radeon_ring_unlock_commit(struct radeon_device *rdev);
+void radeon_ring_unlock_undo(struct radeon_device *rdev);
+int radeon_ring_test(struct radeon_device *rdev);
+int radeon_ring_init(struct radeon_device *rdev, unsigned ring_size);
+void radeon_ring_fini(struct radeon_device *rdev);
+
+
+/*
+ * CS.
+ */
+struct radeon_cs_reloc {
+	struct drm_gem_object		*gobj;
+	struct radeon_object		*robj;
+	struct radeon_object_list	lobj;
+	uint32_t			handle;
+	uint32_t			flags;
+};
+
+struct radeon_cs_chunk {
+	uint32_t		chunk_id;
+	uint32_t		length_dw;
+	uint32_t		*kdata;
+};
+
+struct radeon_cs_parser {
+	struct radeon_device	*rdev;
+	struct drm_file		*filp;
+	/* chunks */
+	unsigned		nchunks;
+	struct radeon_cs_chunk	*chunks;
+	uint64_t		*chunks_array;
+	/* IB */
+	unsigned		idx;
+	/* relocations */
+	unsigned		nrelocs;
+	struct radeon_cs_reloc	*relocs;
+	struct radeon_cs_reloc	**relocs_ptr;
+	struct list_head	validated;
+	/* indices of various chunks */
+	int			chunk_ib_idx;
+	int			chunk_relocs_idx;
+	struct radeon_ib	*ib;
+	void			*track;
+};
+
+struct radeon_cs_packet {
+	unsigned	idx;
+	unsigned	type;
+	unsigned	reg;
+	unsigned	opcode;
+	int		count;
+	unsigned	one_reg_wr;
+};
+
+typedef int (*radeon_packet0_check_t)(struct radeon_cs_parser *p,
+				      struct radeon_cs_packet *pkt,
+				      unsigned idx, unsigned reg);
+typedef int (*radeon_packet3_check_t)(struct radeon_cs_parser *p,
+				      struct radeon_cs_packet *pkt);
+
+
+/*
+ * AGP
+ */
+int radeon_agp_init(struct radeon_device *rdev);
+void radeon_agp_fini(struct radeon_device *rdev);
+
+
+/*
+ * Writeback
+ */
+struct radeon_wb {
+	struct radeon_object	*wb_obj;
+	volatile uint32_t	*wb;
+	uint64_t		gpu_addr;
+};
+
+
+/*
+ * Benchmarking
+ */
+void radeon_benchmark(struct radeon_device *rdev);
+
+
+/*
+ * Debugfs
+ */
+int radeon_debugfs_add_files(struct radeon_device *rdev,
+			     struct drm_info_list *files,
+			     unsigned nfiles);
+int radeon_debugfs_fence_init(struct radeon_device *rdev);
+int r100_debugfs_rbbm_init(struct radeon_device *rdev);
+int r100_debugfs_cp_init(struct radeon_device *rdev);
+
+
+/*
+ * ASIC specific functions.
+ */
+struct radeon_asic {
+	void (*errata)(struct radeon_device *rdev);
+	void (*vram_info)(struct radeon_device *rdev);
+	int (*gpu_reset)(struct radeon_device *rdev);
+	int (*mc_init)(struct radeon_device *rdev);
+	void (*mc_fini)(struct radeon_device *rdev);
+	int (*wb_init)(struct radeon_device *rdev);
+	void (*wb_fini)(struct radeon_device *rdev);
+	int (*gart_enable)(struct radeon_device *rdev);
+	void (*gart_disable)(struct radeon_device *rdev);
+	void (*gart_tlb_flush)(struct radeon_device *rdev);
+	int (*gart_set_page)(struct radeon_device *rdev, int i, uint64_t addr);
+	int (*cp_init)(struct radeon_device *rdev, unsigned ring_size);
+	void (*cp_fini)(struct radeon_device *rdev);
+	void (*cp_disable)(struct radeon_device *rdev);
+	void (*ring_start)(struct radeon_device *rdev);
+	int (*irq_set)(struct radeon_device *rdev);
+	int (*irq_process)(struct radeon_device *rdev);
+	void (*fence_ring_emit)(struct radeon_device *rdev, struct radeon_fence *fence);
+	int (*cs_parse)(struct radeon_cs_parser *p);
+	int (*copy_blit)(struct radeon_device *rdev,
+			 uint64_t src_offset,
+			 uint64_t dst_offset,
+			 unsigned num_pages,
+			 struct radeon_fence *fence);
+	int (*copy_dma)(struct radeon_device *rdev,
+			uint64_t src_offset,
+			uint64_t dst_offset,
+			unsigned num_pages,
+			struct radeon_fence *fence);
+	int (*copy)(struct radeon_device *rdev,
+		    uint64_t src_offset,
+		    uint64_t dst_offset,
+		    unsigned num_pages,
+		    struct radeon_fence *fence);
+	void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock);
+	void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock);
+	void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes);
+	void (*set_clock_gating)(struct radeon_device *rdev, int enable);
+};
+
+
+/*
+ * IOCTL.
+ */
+int radeon_gem_info_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *filp);
+int radeon_gem_create_ioctl(struct drm_device *dev, void *data,
+			    struct drm_file *filp);
+int radeon_gem_pin_ioctl(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+int radeon_gem_unpin_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+int radeon_gem_pwrite_ioctl(struct drm_device *dev, void *data,
+			    struct drm_file *file_priv);
+int radeon_gem_pread_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp);
+int radeon_gem_mmap_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *filp);
+int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *filp);
+int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
+			      struct drm_file *filp);
+int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp);
+
+
+/*
+ * Core structure, functions and helpers.
+ */
+typedef uint32_t (*radeon_rreg_t)(struct radeon_device*, uint32_t);
+typedef void (*radeon_wreg_t)(struct radeon_device*, uint32_t, uint32_t);
+
+struct radeon_device {
+	struct drm_device		*ddev;
+	struct pci_dev			*pdev;
+	/* ASIC */
+	enum radeon_family		family;
+	unsigned long			flags;
+	int				usec_timeout;
+	enum radeon_pll_errata		pll_errata;
+	int				num_gb_pipes;
+	int				disp_priority;
+	/* BIOS */
+	uint8_t				*bios;
+	bool				is_atom_bios;
+	uint16_t			bios_header_start;
+	struct radeon_object		*stollen_vga_memory;
+	struct fb_info			*fbdev_info;
+	struct radeon_object		*fbdev_robj;
+	struct radeon_framebuffer	*fbdev_rfb;
+	/* Register mmio */
+	unsigned long			rmmio_base;
+	unsigned long			rmmio_size;
+	void				*rmmio;
+	radeon_rreg_t			mm_rreg;
+	radeon_wreg_t			mm_wreg;
+	radeon_rreg_t			mc_rreg;
+	radeon_wreg_t			mc_wreg;
+	radeon_rreg_t			pll_rreg;
+	radeon_wreg_t			pll_wreg;
+	radeon_rreg_t			pcie_rreg;
+	radeon_wreg_t			pcie_wreg;
+	radeon_rreg_t			pciep_rreg;
+	radeon_wreg_t			pciep_wreg;
+	struct radeon_clock             clock;
+	struct radeon_mc		mc;
+	struct radeon_gart		gart;
+	struct radeon_mode_info		mode_info;
+	struct radeon_scratch		scratch;
+	struct radeon_mman		mman;
+	struct radeon_fence_driver	fence_drv;
+	struct radeon_cp		cp;
+	struct radeon_ib_pool		ib_pool;
+	struct radeon_irq		irq;
+	struct radeon_asic		*asic;
+	struct radeon_gem		gem;
+	struct mutex			cs_mutex;
+	struct radeon_wb		wb;
+	bool				gpu_lockup;
+	bool				shutdown;
+	bool				suspend;
+};
+
+int radeon_device_init(struct radeon_device *rdev,
+		       struct drm_device *ddev,
+		       struct pci_dev *pdev,
+		       uint32_t flags);
+void radeon_device_fini(struct radeon_device *rdev);
+int radeon_gpu_wait_for_idle(struct radeon_device *rdev);
+
+
+/*
+ * Registers read & write functions.
+ */
+#define RREG8(reg) readb(((void __iomem *)rdev->rmmio) + (reg))
+#define WREG8(reg, v) writeb(v, ((void __iomem *)rdev->rmmio) + (reg))
+#define RREG32(reg) rdev->mm_rreg(rdev, (reg))
+#define WREG32(reg, v) rdev->mm_wreg(rdev, (reg), (v))
+#define REG_SET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
+#define REG_GET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK)
+#define RREG32_PLL(reg) rdev->pll_rreg(rdev, (reg))
+#define WREG32_PLL(reg, v) rdev->pll_wreg(rdev, (reg), (v))
+#define RREG32_MC(reg) rdev->mc_rreg(rdev, (reg))
+#define WREG32_MC(reg, v) rdev->mc_wreg(rdev, (reg), (v))
+#define RREG32_PCIE(reg) rdev->pcie_rreg(rdev, (reg))
+#define WREG32_PCIE(reg, v) rdev->pcie_wreg(rdev, (reg), (v))
+#define WREG32_P(reg, val, mask)				\
+	do {							\
+		uint32_t tmp_ = RREG32(reg);			\
+		tmp_ &= (mask);					\
+		tmp_ |= ((val) & ~(mask));			\
+		WREG32(reg, tmp_);				\
+	} while (0)
+#define WREG32_PLL_P(reg, val, mask)				\
+	do {							\
+		uint32_t tmp_ = RREG32_PLL(reg);		\
+		tmp_ &= (mask);					\
+		tmp_ |= ((val) & ~(mask));			\
+		WREG32_PLL(reg, tmp_);				\
+	} while (0)
+
+void r100_pll_errata_after_index(struct radeon_device *rdev);
+
+
+/*
+ * ASICs helpers.
+ */
+#define ASIC_IS_RV100(rdev) ((rdev->family == CHIP_RV100) || \
+		(rdev->family == CHIP_RV200) || \
+		(rdev->family == CHIP_RS100) || \
+		(rdev->family == CHIP_RS200) || \
+		(rdev->family == CHIP_RV250) || \
+		(rdev->family == CHIP_RV280) || \
+		(rdev->family == CHIP_RS300))
+#define ASIC_IS_R300(rdev) ((rdev->family == CHIP_R300)  ||	\
+		(rdev->family == CHIP_RV350) ||			\
+		(rdev->family == CHIP_R350)  ||			\
+		(rdev->family == CHIP_RV380) ||			\
+		(rdev->family == CHIP_R420)  ||			\
+		(rdev->family == CHIP_R423)  ||			\
+		(rdev->family == CHIP_RV410) ||			\
+		(rdev->family == CHIP_RS400) ||			\
+		(rdev->family == CHIP_RS480))
+#define ASIC_IS_AVIVO(rdev) ((rdev->family >= CHIP_RS600))
+#define ASIC_IS_DCE3(rdev) ((rdev->family >= CHIP_RV620))
+#define ASIC_IS_DCE32(rdev) ((rdev->family >= CHIP_RV730))
+
+
+/*
+ * BIOS helpers.
+ */
+#define RBIOS8(i) (rdev->bios[i])
+#define RBIOS16(i) (RBIOS8(i) | (RBIOS8((i)+1) << 8))
+#define RBIOS32(i) ((RBIOS16(i)) | (RBIOS16((i)+2) << 16))
+
+int radeon_combios_init(struct radeon_device *rdev);
+void radeon_combios_fini(struct radeon_device *rdev);
+int radeon_atombios_init(struct radeon_device *rdev);
+void radeon_atombios_fini(struct radeon_device *rdev);
+
+
+/*
+ * RING helpers.
+ */
+#define CP_PACKET0			0x00000000
+#define		PACKET0_BASE_INDEX_SHIFT	0
+#define		PACKET0_BASE_INDEX_MASK		(0x1ffff << 0)
+#define		PACKET0_COUNT_SHIFT		16
+#define		PACKET0_COUNT_MASK		(0x3fff << 16)
+#define CP_PACKET1			0x40000000
+#define CP_PACKET2			0x80000000
+#define		PACKET2_PAD_SHIFT		0
+#define		PACKET2_PAD_MASK		(0x3fffffff << 0)
+#define CP_PACKET3			0xC0000000
+#define		PACKET3_IT_OPCODE_SHIFT		8
+#define		PACKET3_IT_OPCODE_MASK		(0xff << 8)
+#define		PACKET3_COUNT_SHIFT		16
+#define		PACKET3_COUNT_MASK		(0x3fff << 16)
+/* PACKET3 op code */
+#define		PACKET3_NOP			0x10
+#define		PACKET3_3D_DRAW_VBUF		0x28
+#define		PACKET3_3D_DRAW_IMMD		0x29
+#define		PACKET3_3D_DRAW_INDX		0x2A
+#define		PACKET3_3D_LOAD_VBPNTR		0x2F
+#define		PACKET3_INDX_BUFFER		0x33
+#define		PACKET3_3D_DRAW_VBUF_2		0x34
+#define		PACKET3_3D_DRAW_IMMD_2		0x35
+#define		PACKET3_3D_DRAW_INDX_2		0x36
+#define		PACKET3_BITBLT_MULTI		0x9B
+
+#define PACKET0(reg, n)	(CP_PACKET0 |					\
+			 REG_SET(PACKET0_BASE_INDEX, (reg) >> 2) |	\
+			 REG_SET(PACKET0_COUNT, (n)))
+#define PACKET2(v)	(CP_PACKET2 | REG_SET(PACKET2_PAD, (v)))
+#define PACKET3(op, n)	(CP_PACKET3 |					\
+			 REG_SET(PACKET3_IT_OPCODE, (op)) |		\
+			 REG_SET(PACKET3_COUNT, (n)))
+
+#define	PACKET_TYPE0	0
+#define	PACKET_TYPE1	1
+#define	PACKET_TYPE2	2
+#define	PACKET_TYPE3	3
+
+#define CP_PACKET_GET_TYPE(h) (((h) >> 30) & 3)
+#define CP_PACKET_GET_COUNT(h) (((h) >> 16) & 0x3FFF)
+#define CP_PACKET0_GET_REG(h) (((h) & 0x1FFF) << 2)
+#define CP_PACKET0_GET_ONE_REG_WR(h) (((h) >> 15) & 1)
+#define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
+
+static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
+{
+#if DRM_DEBUG_CODE
+	if (rdev->cp.count_dw <= 0) {
+		DRM_ERROR("radeon: writting more dword to ring than expected !\n");
+	}
+#endif
+	rdev->cp.ring[rdev->cp.wptr++] = v;
+	rdev->cp.wptr &= rdev->cp.ptr_mask;
+	rdev->cp.count_dw--;
+	rdev->cp.ring_free_dw--;
+}
+
+
+/*
+ * ASICs macro.
+ */
+#define radeon_cs_parse(p) rdev->asic->cs_parse((p))
+#define radeon_errata(rdev) (rdev)->asic->errata((rdev))
+#define radeon_vram_info(rdev) (rdev)->asic->vram_info((rdev))
+#define radeon_gpu_reset(rdev) (rdev)->asic->gpu_reset((rdev))
+#define radeon_mc_init(rdev) (rdev)->asic->mc_init((rdev))
+#define radeon_mc_fini(rdev) (rdev)->asic->mc_fini((rdev))
+#define radeon_wb_init(rdev) (rdev)->asic->wb_init((rdev))
+#define radeon_wb_fini(rdev) (rdev)->asic->wb_fini((rdev))
+#define radeon_gart_enable(rdev) (rdev)->asic->gart_enable((rdev))
+#define radeon_gart_disable(rdev) (rdev)->asic->gart_disable((rdev))
+#define radeon_gart_tlb_flush(rdev) (rdev)->asic->gart_tlb_flush((rdev))
+#define radeon_gart_set_page(rdev, i, p) (rdev)->asic->gart_set_page((rdev), (i), (p))
+#define radeon_cp_init(rdev,rsize) (rdev)->asic->cp_init((rdev), (rsize))
+#define radeon_cp_fini(rdev) (rdev)->asic->cp_fini((rdev))
+#define radeon_cp_disable(rdev) (rdev)->asic->cp_disable((rdev))
+#define radeon_ring_start(rdev) (rdev)->asic->ring_start((rdev))
+#define radeon_irq_set(rdev) (rdev)->asic->irq_set((rdev))
+#define radeon_irq_process(rdev) (rdev)->asic->irq_process((rdev))
+#define radeon_fence_ring_emit(rdev, fence) (rdev)->asic->fence_ring_emit((rdev), (fence))
+#define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f))
+#define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f))
+#define radeon_copy(rdev, s, d, np, f) (rdev)->asic->copy((rdev), (s), (d), (np), (f))
+#define radeon_set_engine_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
+#define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
+#define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l))
+#define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e))
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c
new file mode 100644
index 00000000000..23ea9955ac5
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_agp.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Dave Airlie
+ *    Jerome Glisse <glisse@freedesktop.org>
+ */
+#include "drmP.h"
+#include "drm.h"
+#include "radeon.h"
+#include "radeon_drm.h"
+
+#if __OS_HAS_AGP
+
+struct radeon_agpmode_quirk {
+	u32 hostbridge_vendor;
+	u32 hostbridge_device;
+	u32 chip_vendor;
+	u32 chip_device;
+	u32 subsys_vendor;
+	u32 subsys_device;
+	u32 default_mode;
+};
+
+static struct radeon_agpmode_quirk radeon_agpmode_quirk_list[] = {
+	/* Intel E7505 Memory Controller Hub / RV350 AR [Radeon 9600XT] Needs AGPMode 4 (deb #515326) */
+	{ PCI_VENDOR_ID_INTEL, 0x2550, PCI_VENDOR_ID_ATI, 0x4152, 0x1458, 0x4038, 4},
+	/* Intel 82865G/PE/P DRAM Controller/Host-Hub / Mobility 9800 Needs AGPMode 4 (deb #462590) */
+	{ PCI_VENDOR_ID_INTEL, 0x2570, PCI_VENDOR_ID_ATI, 0x4a4e, PCI_VENDOR_ID_DELL, 0x5106, 4},
+	/* Intel 82865G/PE/P DRAM Controller/Host-Hub / RV280 [Radeon 9200 SE] Needs AGPMode 4 (lp #300304) */
+	{ PCI_VENDOR_ID_INTEL, 0x2570, PCI_VENDOR_ID_ATI, 0x5964,
+		0x148c, 0x2073, 4},
+	/* Intel 82855PM Processor to I/O Controller / Mobility M6 LY Needs AGPMode 1 (deb #467235) */
+	{ PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4c59,
+		PCI_VENDOR_ID_IBM, 0x052f, 1},
+	/* Intel 82855PM host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (lp #195051) */
+	{ PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4e50,
+		PCI_VENDOR_ID_IBM, 0x0550, 1},
+	/* Intel 82855PM host bridge / Mobility M7 needs AGPMode 1 */
+	{ PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4c57,
+		PCI_VENDOR_ID_IBM, 0x0530, 1},
+	/* Intel 82855PM host bridge / FireGL Mobility T2 RV350 Needs AGPMode 2 (fdo #20647) */
+	{ PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4e54,
+		PCI_VENDOR_ID_IBM, 0x054f, 2},
+	/* Intel 82855PM host bridge / Mobility M9+ / VaioPCG-V505DX Needs AGPMode 2 (fdo #17928) */
+	{ PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x5c61,
+		PCI_VENDOR_ID_SONY, 0x816b, 2},
+	/* Intel 82855PM Processor to I/O Controller / Mobility M9+ Needs AGPMode 8 (phoronix forum) */
+	{ PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x5c61,
+		PCI_VENDOR_ID_SONY, 0x8195, 8},
+	/* Intel 82830 830 Chipset Host Bridge / Mobility M6 LY Needs AGPMode 2 (fdo #17360)*/
+	{ PCI_VENDOR_ID_INTEL, 0x3575, PCI_VENDOR_ID_ATI, 0x4c59,
+		PCI_VENDOR_ID_DELL, 0x00e3, 2},
+	/* Intel 82852/82855 host bridge / Mobility FireGL 9000 R250 Needs AGPMode 1 (lp #296617) */
+	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4c66,
+		PCI_VENDOR_ID_DELL, 0x0149, 1},
+	/* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (deb #467460) */
+	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50,
+		0x1025, 0x0061, 1},
+	/* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (lp #203007) */
+	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50,
+		0x1025, 0x0064, 1},
+	/* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (lp #141551) */
+	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50,
+		PCI_VENDOR_ID_ASUSTEK, 0x1942, 1},
+	/* Intel 82852/82855 host bridge / Mobility 9600/9700 Needs AGPMode 1 (deb #510208) */
+	{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50,
+		0x10cf, 0x127f, 1},
+	/* ASRock K7VT4A+ AGP 8x / ATI Radeon 9250 AGP Needs AGPMode 4 (lp #133192) */
+	{ 0x1849, 0x3189, PCI_VENDOR_ID_ATI, 0x5960,
+		0x1787, 0x5960, 4},
+	/* VIA K8M800 Host Bridge / RV280 [Radeon 9200 PRO] Needs AGPMode 4 (fdo #12544) */
+	{ PCI_VENDOR_ID_VIA, 0x0204, PCI_VENDOR_ID_ATI, 0x5960,
+		0x17af, 0x2020, 4},
+	/* VIA KT880 Host Bridge / RV350 [Radeon 9550] Needs AGPMode 4 (fdo #19981) */
+	{ PCI_VENDOR_ID_VIA, 0x0269, PCI_VENDOR_ID_ATI, 0x4153,
+		PCI_VENDOR_ID_ASUSTEK, 0x003c, 4},
+	/* VIA VT8363 Host Bridge / R200 QL [Radeon 8500] Needs AGPMode 2 (lp #141551) */
+	{ PCI_VENDOR_ID_VIA, 0x0305, PCI_VENDOR_ID_ATI, 0x514c,
+		PCI_VENDOR_ID_ATI, 0x013a, 2},
+	/* VIA VT82C693A Host Bridge / RV280 [Radeon 9200 PRO] Needs AGPMode 2 (deb #515512) */
+	{ PCI_VENDOR_ID_VIA, 0x0691, PCI_VENDOR_ID_ATI, 0x5960,
+		PCI_VENDOR_ID_ASUSTEK, 0x004c, 2},
+	/* VIA VT82C693A Host Bridge / RV280 [Radeon 9200 PRO] Needs AGPMode 2 */
+	{ PCI_VENDOR_ID_VIA, 0x0691, PCI_VENDOR_ID_ATI, 0x5960,
+		PCI_VENDOR_ID_ASUSTEK, 0x0054, 2},
+	/* VIA VT8377 Host Bridge / R200 QM [Radeon 9100] Needs AGPMode 4 (deb #461144) */
+	{ PCI_VENDOR_ID_VIA, 0x3189, PCI_VENDOR_ID_ATI, 0x514d,
+		0x174b, 0x7149, 4},
+	/* VIA VT8377 Host Bridge / RV280 [Radeon 9200 PRO] Needs AGPMode 4 (lp #312693) */
+	{ PCI_VENDOR_ID_VIA, 0x3189, PCI_VENDOR_ID_ATI, 0x5960,
+		0x1462, 0x0380, 4},
+	/* VIA VT8377 Host Bridge / RV280 Needs AGPMode 4 (ati ML) */
+	{ PCI_VENDOR_ID_VIA, 0x3189, PCI_VENDOR_ID_ATI, 0x5964,
+		0x148c, 0x2073, 4},
+	/* ATI Host Bridge / RV280 [M9+] Needs AGPMode 1 (phoronix forum) */
+	{ PCI_VENDOR_ID_ATI, 0xcbb2, PCI_VENDOR_ID_ATI, 0x5c61,
+		PCI_VENDOR_ID_SONY, 0x8175, 1},
+	/* HP Host Bridge / R300 [FireGL X1] Needs AGPMode 2 (fdo #7770) */
+	{ PCI_VENDOR_ID_HP, 0x122e, PCI_VENDOR_ID_ATI, 0x4e47,
+		PCI_VENDOR_ID_ATI, 0x0152, 2},
+	{ 0, 0, 0, 0, 0, 0, 0 },
+};
+#endif
+
+int radeon_agp_init(struct radeon_device *rdev)
+{
+#if __OS_HAS_AGP
+	struct radeon_agpmode_quirk *p = radeon_agpmode_quirk_list;
+	struct drm_agp_mode mode;
+	struct drm_agp_info info;
+	uint32_t agp_status;
+	int default_mode;
+	bool is_v3;
+	int ret;
+
+	/* Acquire AGP. */
+	if (!rdev->ddev->agp->acquired) {
+		ret = drm_agp_acquire(rdev->ddev);
+		if (ret) {
+			DRM_ERROR("Unable to acquire AGP: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = drm_agp_info(rdev->ddev, &info);
+	if (ret) {
+		DRM_ERROR("Unable to get AGP info: %d\n", ret);
+		return ret;
+	}
+	mode.mode = info.mode;
+	agp_status = (RREG32(RADEON_AGP_STATUS) | RADEON_AGPv3_MODE) & mode.mode;
+	is_v3 = !!(agp_status & RADEON_AGPv3_MODE);
+
+	if (is_v3) {
+		default_mode = (agp_status & RADEON_AGPv3_8X_MODE) ? 8 : 4;
+	} else {
+		if (agp_status & RADEON_AGP_4X_MODE) {
+			default_mode = 4;
+		} else if (agp_status & RADEON_AGP_2X_MODE) {
+			default_mode = 2;
+		} else {
+			default_mode = 1;
+		}
+	}
+
+	/* Apply AGPMode Quirks */
+	while (p && p->chip_device != 0) {
+		if (info.id_vendor == p->hostbridge_vendor &&
+		    info.id_device == p->hostbridge_device &&
+		    rdev->pdev->vendor == p->chip_vendor &&
+		    rdev->pdev->device == p->chip_device &&
+		    rdev->pdev->subsystem_vendor == p->subsys_vendor &&
+		    rdev->pdev->subsystem_device == p->subsys_device) {
+			default_mode = p->default_mode;
+		}
+		++p;
+	}
+
+	if (radeon_agpmode > 0) {
+		if ((radeon_agpmode < (is_v3 ? 4 : 1)) ||
+		    (radeon_agpmode > (is_v3 ? 8 : 4)) ||
+		    (radeon_agpmode & (radeon_agpmode - 1))) {
+			DRM_ERROR("Illegal AGP Mode: %d (valid %s), leaving at %d\n",
+				  radeon_agpmode, is_v3 ? "4, 8" : "1, 2, 4",
+				  default_mode);
+			radeon_agpmode = default_mode;
+		} else {
+			DRM_INFO("AGP mode requested: %d\n", radeon_agpmode);
+		}
+	} else {
+		radeon_agpmode = default_mode;
+	}
+
+	mode.mode &= ~RADEON_AGP_MODE_MASK;
+	if (is_v3) {
+		switch (radeon_agpmode) {
+		case 8:
+			mode.mode |= RADEON_AGPv3_8X_MODE;
+			break;
+		case 4:
+		default:
+			mode.mode |= RADEON_AGPv3_4X_MODE;
+			break;
+		}
+	} else {
+		switch (radeon_agpmode) {
+		case 4:
+			mode.mode |= RADEON_AGP_4X_MODE;
+			break;
+		case 2:
+			mode.mode |= RADEON_AGP_2X_MODE;
+			break;
+		case 1:
+		default:
+			mode.mode |= RADEON_AGP_1X_MODE;
+			break;
+		}
+	}
+
+	mode.mode &= ~RADEON_AGP_FW_MODE; /* disable fw */
+	ret = drm_agp_enable(rdev->ddev, mode);
+	if (ret) {
+		DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode);
+		return ret;
+	}
+
+	rdev->mc.agp_base = rdev->ddev->agp->agp_info.aper_base;
+	rdev->mc.gtt_size = rdev->ddev->agp->agp_info.aper_size << 20;
+
+	/* workaround some hw issues */
+	if (rdev->family < CHIP_R200) {
+		WREG32(RADEON_AGP_CNTL, RREG32(RADEON_AGP_CNTL) | 0x000e0000);
+	}
+	return 0;
+#else
+	return 0;
+#endif
+}
+
+void radeon_agp_fini(struct radeon_device *rdev)
+{
+#if __OS_HAS_AGP
+	if (rdev->flags & RADEON_IS_AGP) {
+		if (rdev->ddev->agp && rdev->ddev->agp->acquired) {
+			drm_agp_release(rdev->ddev);
+		}
+	}
+#endif
+}
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
new file mode 100644
index 00000000000..e57d8a784e9
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -0,0 +1,405 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RADEON_ASIC_H__
+#define __RADEON_ASIC_H__
+
+/*
+ * common functions
+ */
+void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock);
+void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable);
+
+void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock);
+void radeon_atom_set_memory_clock(struct radeon_device *rdev, uint32_t mem_clock);
+void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
+
+/*
+ * r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
+ */
+uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg);
+void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void r100_errata(struct radeon_device *rdev);
+void r100_vram_info(struct radeon_device *rdev);
+int r100_gpu_reset(struct radeon_device *rdev);
+int r100_mc_init(struct radeon_device *rdev);
+void r100_mc_fini(struct radeon_device *rdev);
+int r100_wb_init(struct radeon_device *rdev);
+void r100_wb_fini(struct radeon_device *rdev);
+int r100_gart_enable(struct radeon_device *rdev);
+void r100_pci_gart_disable(struct radeon_device *rdev);
+void r100_pci_gart_tlb_flush(struct radeon_device *rdev);
+int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
+int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
+void r100_cp_fini(struct radeon_device *rdev);
+void r100_cp_disable(struct radeon_device *rdev);
+void r100_ring_start(struct radeon_device *rdev);
+int r100_irq_set(struct radeon_device *rdev);
+int r100_irq_process(struct radeon_device *rdev);
+void r100_fence_ring_emit(struct radeon_device *rdev,
+			  struct radeon_fence *fence);
+int r100_cs_parse(struct radeon_cs_parser *p);
+void r100_pll_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+uint32_t r100_pll_rreg(struct radeon_device *rdev, uint32_t reg);
+int r100_copy_blit(struct radeon_device *rdev,
+		   uint64_t src_offset,
+		   uint64_t dst_offset,
+		   unsigned num_pages,
+		   struct radeon_fence *fence);
+
+static struct radeon_asic r100_asic = {
+	.errata = &r100_errata,
+	.vram_info = &r100_vram_info,
+	.gpu_reset = &r100_gpu_reset,
+	.mc_init = &r100_mc_init,
+	.mc_fini = &r100_mc_fini,
+	.wb_init = &r100_wb_init,
+	.wb_fini = &r100_wb_fini,
+	.gart_enable = &r100_gart_enable,
+	.gart_disable = &r100_pci_gart_disable,
+	.gart_tlb_flush = &r100_pci_gart_tlb_flush,
+	.gart_set_page = &r100_pci_gart_set_page,
+	.cp_init = &r100_cp_init,
+	.cp_fini = &r100_cp_fini,
+	.cp_disable = &r100_cp_disable,
+	.ring_start = &r100_ring_start,
+	.irq_set = &r100_irq_set,
+	.irq_process = &r100_irq_process,
+	.fence_ring_emit = &r100_fence_ring_emit,
+	.cs_parse = &r100_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = NULL,
+	.copy = &r100_copy_blit,
+	.set_engine_clock = &radeon_legacy_set_engine_clock,
+	.set_memory_clock = NULL,
+	.set_pcie_lanes = NULL,
+	.set_clock_gating = &radeon_legacy_set_clock_gating,
+};
+
+
+/*
+ * r300,r350,rv350,rv380
+ */
+void r300_errata(struct radeon_device *rdev);
+void r300_vram_info(struct radeon_device *rdev);
+int r300_gpu_reset(struct radeon_device *rdev);
+int r300_mc_init(struct radeon_device *rdev);
+void r300_mc_fini(struct radeon_device *rdev);
+void r300_ring_start(struct radeon_device *rdev);
+void r300_fence_ring_emit(struct radeon_device *rdev,
+			  struct radeon_fence *fence);
+int r300_cs_parse(struct radeon_cs_parser *p);
+int r300_gart_enable(struct radeon_device *rdev);
+void rv370_pcie_gart_disable(struct radeon_device *rdev);
+void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev);
+int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
+uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
+void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes);
+int r300_copy_dma(struct radeon_device *rdev,
+		  uint64_t src_offset,
+		  uint64_t dst_offset,
+		  unsigned num_pages,
+		  struct radeon_fence *fence);
+static struct radeon_asic r300_asic = {
+	.errata = &r300_errata,
+	.vram_info = &r300_vram_info,
+	.gpu_reset = &r300_gpu_reset,
+	.mc_init = &r300_mc_init,
+	.mc_fini = &r300_mc_fini,
+	.wb_init = &r100_wb_init,
+	.wb_fini = &r100_wb_fini,
+	.gart_enable = &r300_gart_enable,
+	.gart_disable = &r100_pci_gart_disable,
+	.gart_tlb_flush = &r100_pci_gart_tlb_flush,
+	.gart_set_page = &r100_pci_gart_set_page,
+	.cp_init = &r100_cp_init,
+	.cp_fini = &r100_cp_fini,
+	.cp_disable = &r100_cp_disable,
+	.ring_start = &r300_ring_start,
+	.irq_set = &r100_irq_set,
+	.irq_process = &r100_irq_process,
+	.fence_ring_emit = &r300_fence_ring_emit,
+	.cs_parse = &r300_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = &r300_copy_dma,
+	.copy = &r100_copy_blit,
+	.set_engine_clock = &radeon_legacy_set_engine_clock,
+	.set_memory_clock = NULL,
+	.set_pcie_lanes = &rv370_set_pcie_lanes,
+	.set_clock_gating = &radeon_legacy_set_clock_gating,
+};
+
+/*
+ * r420,r423,rv410
+ */
+void r420_errata(struct radeon_device *rdev);
+void r420_vram_info(struct radeon_device *rdev);
+int r420_mc_init(struct radeon_device *rdev);
+void r420_mc_fini(struct radeon_device *rdev);
+static struct radeon_asic r420_asic = {
+	.errata = &r420_errata,
+	.vram_info = &r420_vram_info,
+	.gpu_reset = &r300_gpu_reset,
+	.mc_init = &r420_mc_init,
+	.mc_fini = &r420_mc_fini,
+	.wb_init = &r100_wb_init,
+	.wb_fini = &r100_wb_fini,
+	.gart_enable = &r300_gart_enable,
+	.gart_disable = &rv370_pcie_gart_disable,
+	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
+	.gart_set_page = &rv370_pcie_gart_set_page,
+	.cp_init = &r100_cp_init,
+	.cp_fini = &r100_cp_fini,
+	.cp_disable = &r100_cp_disable,
+	.ring_start = &r300_ring_start,
+	.irq_set = &r100_irq_set,
+	.irq_process = &r100_irq_process,
+	.fence_ring_emit = &r300_fence_ring_emit,
+	.cs_parse = &r300_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = &r300_copy_dma,
+	.copy = &r100_copy_blit,
+	.set_engine_clock = &radeon_atom_set_engine_clock,
+	.set_memory_clock = &radeon_atom_set_memory_clock,
+	.set_pcie_lanes = &rv370_set_pcie_lanes,
+	.set_clock_gating = &radeon_atom_set_clock_gating,
+};
+
+
+/*
+ * rs400,rs480
+ */
+void rs400_errata(struct radeon_device *rdev);
+void rs400_vram_info(struct radeon_device *rdev);
+int rs400_mc_init(struct radeon_device *rdev);
+void rs400_mc_fini(struct radeon_device *rdev);
+int rs400_gart_enable(struct radeon_device *rdev);
+void rs400_gart_disable(struct radeon_device *rdev);
+void rs400_gart_tlb_flush(struct radeon_device *rdev);
+int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
+uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg);
+void rs400_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+static struct radeon_asic rs400_asic = {
+	.errata = &rs400_errata,
+	.vram_info = &rs400_vram_info,
+	.gpu_reset = &r300_gpu_reset,
+	.mc_init = &rs400_mc_init,
+	.mc_fini = &rs400_mc_fini,
+	.wb_init = &r100_wb_init,
+	.wb_fini = &r100_wb_fini,
+	.gart_enable = &rs400_gart_enable,
+	.gart_disable = &rs400_gart_disable,
+	.gart_tlb_flush = &rs400_gart_tlb_flush,
+	.gart_set_page = &rs400_gart_set_page,
+	.cp_init = &r100_cp_init,
+	.cp_fini = &r100_cp_fini,
+	.cp_disable = &r100_cp_disable,
+	.ring_start = &r300_ring_start,
+	.irq_set = &r100_irq_set,
+	.irq_process = &r100_irq_process,
+	.fence_ring_emit = &r300_fence_ring_emit,
+	.cs_parse = &r300_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = &r300_copy_dma,
+	.copy = &r100_copy_blit,
+	.set_engine_clock = &radeon_legacy_set_engine_clock,
+	.set_memory_clock = NULL,
+	.set_pcie_lanes = NULL,
+	.set_clock_gating = &radeon_legacy_set_clock_gating,
+};
+
+
+/*
+ * rs600.
+ */
+void rs600_errata(struct radeon_device *rdev);
+void rs600_vram_info(struct radeon_device *rdev);
+int rs600_mc_init(struct radeon_device *rdev);
+void rs600_mc_fini(struct radeon_device *rdev);
+int rs600_irq_set(struct radeon_device *rdev);
+int rs600_gart_enable(struct radeon_device *rdev);
+void rs600_gart_disable(struct radeon_device *rdev);
+void rs600_gart_tlb_flush(struct radeon_device *rdev);
+int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
+uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
+void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+static struct radeon_asic rs600_asic = {
+	.errata = &rs600_errata,
+	.vram_info = &rs600_vram_info,
+	.gpu_reset = &r300_gpu_reset,
+	.mc_init = &rs600_mc_init,
+	.mc_fini = &rs600_mc_fini,
+	.wb_init = &r100_wb_init,
+	.wb_fini = &r100_wb_fini,
+	.gart_enable = &rs600_gart_enable,
+	.gart_disable = &rs600_gart_disable,
+	.gart_tlb_flush = &rs600_gart_tlb_flush,
+	.gart_set_page = &rs600_gart_set_page,
+	.cp_init = &r100_cp_init,
+	.cp_fini = &r100_cp_fini,
+	.cp_disable = &r100_cp_disable,
+	.ring_start = &r300_ring_start,
+	.irq_set = &rs600_irq_set,
+	.irq_process = &r100_irq_process,
+	.fence_ring_emit = &r300_fence_ring_emit,
+	.cs_parse = &r300_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = &r300_copy_dma,
+	.copy = &r100_copy_blit,
+	.set_engine_clock = &radeon_atom_set_engine_clock,
+	.set_memory_clock = &radeon_atom_set_memory_clock,
+	.set_pcie_lanes = NULL,
+	.set_clock_gating = &radeon_atom_set_clock_gating,
+};
+
+
+/*
+ * rs690,rs740
+ */
+void rs690_errata(struct radeon_device *rdev);
+void rs690_vram_info(struct radeon_device *rdev);
+int rs690_mc_init(struct radeon_device *rdev);
+void rs690_mc_fini(struct radeon_device *rdev);
+uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
+void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+static struct radeon_asic rs690_asic = {
+	.errata = &rs690_errata,
+	.vram_info = &rs690_vram_info,
+	.gpu_reset = &r300_gpu_reset,
+	.mc_init = &rs690_mc_init,
+	.mc_fini = &rs690_mc_fini,
+	.wb_init = &r100_wb_init,
+	.wb_fini = &r100_wb_fini,
+	.gart_enable = &rs400_gart_enable,
+	.gart_disable = &rs400_gart_disable,
+	.gart_tlb_flush = &rs400_gart_tlb_flush,
+	.gart_set_page = &rs400_gart_set_page,
+	.cp_init = &r100_cp_init,
+	.cp_fini = &r100_cp_fini,
+	.cp_disable = &r100_cp_disable,
+	.ring_start = &r300_ring_start,
+	.irq_set = &rs600_irq_set,
+	.irq_process = &r100_irq_process,
+	.fence_ring_emit = &r300_fence_ring_emit,
+	.cs_parse = &r300_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = &r300_copy_dma,
+	.copy = &r300_copy_dma,
+	.set_engine_clock = &radeon_atom_set_engine_clock,
+	.set_memory_clock = &radeon_atom_set_memory_clock,
+	.set_pcie_lanes = NULL,
+	.set_clock_gating = &radeon_atom_set_clock_gating,
+};
+
+
+/*
+ * rv515
+ */
+void rv515_errata(struct radeon_device *rdev);
+void rv515_vram_info(struct radeon_device *rdev);
+int rv515_gpu_reset(struct radeon_device *rdev);
+int rv515_mc_init(struct radeon_device *rdev);
+void rv515_mc_fini(struct radeon_device *rdev);
+uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg);
+void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rv515_ring_start(struct radeon_device *rdev);
+uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
+void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+static struct radeon_asic rv515_asic = {
+	.errata = &rv515_errata,
+	.vram_info = &rv515_vram_info,
+	.gpu_reset = &rv515_gpu_reset,
+	.mc_init = &rv515_mc_init,
+	.mc_fini = &rv515_mc_fini,
+	.wb_init = &r100_wb_init,
+	.wb_fini = &r100_wb_fini,
+	.gart_enable = &r300_gart_enable,
+	.gart_disable = &rv370_pcie_gart_disable,
+	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
+	.gart_set_page = &rv370_pcie_gart_set_page,
+	.cp_init = &r100_cp_init,
+	.cp_fini = &r100_cp_fini,
+	.cp_disable = &r100_cp_disable,
+	.ring_start = &rv515_ring_start,
+	.irq_set = &r100_irq_set,
+	.irq_process = &r100_irq_process,
+	.fence_ring_emit = &r300_fence_ring_emit,
+	.cs_parse = &r100_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = &r300_copy_dma,
+	.copy = &r100_copy_blit,
+	.set_engine_clock = &radeon_atom_set_engine_clock,
+	.set_memory_clock = &radeon_atom_set_memory_clock,
+	.set_pcie_lanes = &rv370_set_pcie_lanes,
+	.set_clock_gating = &radeon_atom_set_clock_gating,
+};
+
+
+/*
+ * r520,rv530,rv560,rv570,r580
+ */
+void r520_errata(struct radeon_device *rdev);
+void r520_vram_info(struct radeon_device *rdev);
+int r520_mc_init(struct radeon_device *rdev);
+void r520_mc_fini(struct radeon_device *rdev);
+static struct radeon_asic r520_asic = {
+	.errata = &r520_errata,
+	.vram_info = &r520_vram_info,
+	.gpu_reset = &rv515_gpu_reset,
+	.mc_init = &r520_mc_init,
+	.mc_fini = &r520_mc_fini,
+	.wb_init = &r100_wb_init,
+	.wb_fini = &r100_wb_fini,
+	.gart_enable = &r300_gart_enable,
+	.gart_disable = &rv370_pcie_gart_disable,
+	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
+	.gart_set_page = &rv370_pcie_gart_set_page,
+	.cp_init = &r100_cp_init,
+	.cp_fini = &r100_cp_fini,
+	.cp_disable = &r100_cp_disable,
+	.ring_start = &rv515_ring_start,
+	.irq_set = &r100_irq_set,
+	.irq_process = &r100_irq_process,
+	.fence_ring_emit = &r300_fence_ring_emit,
+	.cs_parse = &r100_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = &r300_copy_dma,
+	.copy = &r100_copy_blit,
+	.set_engine_clock = &radeon_atom_set_engine_clock,
+	.set_memory_clock = &radeon_atom_set_memory_clock,
+	.set_pcie_lanes = &rv370_set_pcie_lanes,
+	.set_clock_gating = &radeon_atom_set_clock_gating,
+};
+
+/*
+ * r600,rv610,rv630,rv620,rv635,rv670,rs780,rv770,rv730,rv710
+ */
+uint32_t r600_pciep_rreg(struct radeon_device *rdev, uint32_t reg);
+void r600_pciep_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
new file mode 100644
index 00000000000..786632d3e37
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -0,0 +1,1298 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+
+#include "atom.h"
+#include "atom-bits.h"
+
+/* from radeon_encoder.c */
+extern uint32_t
+radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device,
+		      uint8_t dac);
+extern void radeon_link_encoder_connector(struct drm_device *dev);
+extern void
+radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id,
+			uint32_t supported_device);
+
+/* from radeon_connector.c */
+extern void
+radeon_add_atom_connector(struct drm_device *dev,
+			  uint32_t connector_id,
+			  uint32_t supported_device,
+			  int connector_type,
+			  struct radeon_i2c_bus_rec *i2c_bus,
+			  bool linkb, uint32_t igp_lane_info);
+
+/* from radeon_legacy_encoder.c */
+extern void
+radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id,
+			  uint32_t supported_device);
+
+union atom_supported_devices {
+	struct _ATOM_SUPPORTED_DEVICES_INFO info;
+	struct _ATOM_SUPPORTED_DEVICES_INFO_2 info_2;
+	struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 info_2d1;
+};
+
+static inline struct radeon_i2c_bus_rec radeon_lookup_gpio(struct drm_device
+							   *dev, uint8_t id)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct atom_context *ctx = rdev->mode_info.atom_context;
+	ATOM_GPIO_I2C_ASSIGMENT gpio;
+	struct radeon_i2c_bus_rec i2c;
+	int index = GetIndexIntoMasterTable(DATA, GPIO_I2C_Info);
+	struct _ATOM_GPIO_I2C_INFO *i2c_info;
+	uint16_t data_offset;
+
+	memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec));
+	i2c.valid = false;
+
+	atom_parse_data_header(ctx, index, NULL, NULL, NULL, &data_offset);
+
+	i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset);
+
+	gpio = i2c_info->asGPIO_Info[id];
+
+	i2c.mask_clk_reg = le16_to_cpu(gpio.usClkMaskRegisterIndex) * 4;
+	i2c.mask_data_reg = le16_to_cpu(gpio.usDataMaskRegisterIndex) * 4;
+	i2c.put_clk_reg = le16_to_cpu(gpio.usClkEnRegisterIndex) * 4;
+	i2c.put_data_reg = le16_to_cpu(gpio.usDataEnRegisterIndex) * 4;
+	i2c.get_clk_reg = le16_to_cpu(gpio.usClkY_RegisterIndex) * 4;
+	i2c.get_data_reg = le16_to_cpu(gpio.usDataY_RegisterIndex) * 4;
+	i2c.a_clk_reg = le16_to_cpu(gpio.usClkA_RegisterIndex) * 4;
+	i2c.a_data_reg = le16_to_cpu(gpio.usDataA_RegisterIndex) * 4;
+	i2c.mask_clk_mask = (1 << gpio.ucClkMaskShift);
+	i2c.mask_data_mask = (1 << gpio.ucDataMaskShift);
+	i2c.put_clk_mask = (1 << gpio.ucClkEnShift);
+	i2c.put_data_mask = (1 << gpio.ucDataEnShift);
+	i2c.get_clk_mask = (1 << gpio.ucClkY_Shift);
+	i2c.get_data_mask = (1 << gpio.ucDataY_Shift);
+	i2c.a_clk_mask = (1 << gpio.ucClkA_Shift);
+	i2c.a_data_mask = (1 << gpio.ucDataA_Shift);
+	i2c.valid = true;
+
+	return i2c;
+}
+
+static bool radeon_atom_apply_quirks(struct drm_device *dev,
+				     uint32_t supported_device,
+				     int *connector_type,
+				     struct radeon_i2c_bus_rec *i2c_bus)
+{
+
+	/* Asus M2A-VM HDMI board lists the DVI port as HDMI */
+	if ((dev->pdev->device == 0x791e) &&
+	    (dev->pdev->subsystem_vendor == 0x1043) &&
+	    (dev->pdev->subsystem_device == 0x826d)) {
+		if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
+		    (supported_device == ATOM_DEVICE_DFP3_SUPPORT))
+			*connector_type = DRM_MODE_CONNECTOR_DVID;
+	}
+
+	/* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */
+	if ((dev->pdev->device == 0x7941) &&
+	    (dev->pdev->subsystem_vendor == 0x147b) &&
+	    (dev->pdev->subsystem_device == 0x2412)) {
+		if (*connector_type == DRM_MODE_CONNECTOR_DVII)
+			return false;
+	}
+
+	/* Falcon NW laptop lists vga ddc line for LVDS */
+	if ((dev->pdev->device == 0x5653) &&
+	    (dev->pdev->subsystem_vendor == 0x1462) &&
+	    (dev->pdev->subsystem_device == 0x0291)) {
+		if (*connector_type == DRM_MODE_CONNECTOR_LVDS)
+			i2c_bus->valid = false;
+	}
+
+	/* Funky macbooks */
+	if ((dev->pdev->device == 0x71C5) &&
+	    (dev->pdev->subsystem_vendor == 0x106b) &&
+	    (dev->pdev->subsystem_device == 0x0080)) {
+		if ((supported_device == ATOM_DEVICE_CRT1_SUPPORT) ||
+		    (supported_device == ATOM_DEVICE_DFP2_SUPPORT))
+			return false;
+	}
+
+	/* some BIOSes seem to report DAC on HDMI - they hurt me with their lies */
+	if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) ||
+	    (*connector_type == DRM_MODE_CONNECTOR_HDMIB)) {
+		if (supported_device & (ATOM_DEVICE_CRT_SUPPORT)) {
+			return false;
+		}
+	}
+
+	/* ASUS HD 3600 XT board lists the DVI port as HDMI */
+	if ((dev->pdev->device == 0x9598) &&
+	    (dev->pdev->subsystem_vendor == 0x1043) &&
+	    (dev->pdev->subsystem_device == 0x01da)) {
+		if (*connector_type == DRM_MODE_CONNECTOR_HDMIB) {
+			*connector_type = DRM_MODE_CONNECTOR_DVID;
+		}
+	}
+
+	return true;
+}
+
+const int supported_devices_connector_convert[] = {
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_VGA,
+	DRM_MODE_CONNECTOR_DVII,
+	DRM_MODE_CONNECTOR_DVID,
+	DRM_MODE_CONNECTOR_DVIA,
+	DRM_MODE_CONNECTOR_SVIDEO,
+	DRM_MODE_CONNECTOR_Composite,
+	DRM_MODE_CONNECTOR_LVDS,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_HDMIA,
+	DRM_MODE_CONNECTOR_HDMIB,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_9PinDIN,
+	DRM_MODE_CONNECTOR_DisplayPort
+};
+
+const int object_connector_convert[] = {
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_DVII,
+	DRM_MODE_CONNECTOR_DVII,
+	DRM_MODE_CONNECTOR_DVID,
+	DRM_MODE_CONNECTOR_DVID,
+	DRM_MODE_CONNECTOR_VGA,
+	DRM_MODE_CONNECTOR_Composite,
+	DRM_MODE_CONNECTOR_SVIDEO,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_9PinDIN,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_HDMIA,
+	DRM_MODE_CONNECTOR_HDMIB,
+	DRM_MODE_CONNECTOR_HDMIB,
+	DRM_MODE_CONNECTOR_LVDS,
+	DRM_MODE_CONNECTOR_9PinDIN,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_DisplayPort
+};
+
+bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_mode_info *mode_info = &rdev->mode_info;
+	struct atom_context *ctx = mode_info->atom_context;
+	int index = GetIndexIntoMasterTable(DATA, Object_Header);
+	uint16_t size, data_offset;
+	uint8_t frev, crev, line_mux = 0;
+	ATOM_CONNECTOR_OBJECT_TABLE *con_obj;
+	ATOM_DISPLAY_OBJECT_PATH_TABLE *path_obj;
+	ATOM_OBJECT_HEADER *obj_header;
+	int i, j, path_size, device_support;
+	int connector_type;
+	uint16_t igp_lane_info;
+	bool linkb;
+	struct radeon_i2c_bus_rec ddc_bus;
+
+	atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset);
+
+	if (data_offset == 0)
+		return false;
+
+	if (crev < 2)
+		return false;
+
+	obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset);
+	path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *)
+	    (ctx->bios + data_offset +
+	     le16_to_cpu(obj_header->usDisplayPathTableOffset));
+	con_obj = (ATOM_CONNECTOR_OBJECT_TABLE *)
+	    (ctx->bios + data_offset +
+	     le16_to_cpu(obj_header->usConnectorObjectTableOffset));
+	device_support = le16_to_cpu(obj_header->usDeviceSupport);
+
+	path_size = 0;
+	for (i = 0; i < path_obj->ucNumOfDispPath; i++) {
+		uint8_t *addr = (uint8_t *) path_obj->asDispPath;
+		ATOM_DISPLAY_OBJECT_PATH *path;
+		addr += path_size;
+		path = (ATOM_DISPLAY_OBJECT_PATH *) addr;
+		path_size += le16_to_cpu(path->usSize);
+		linkb = false;
+
+		if (device_support & le16_to_cpu(path->usDeviceTag)) {
+			uint8_t con_obj_id, con_obj_num, con_obj_type;
+
+			con_obj_id =
+			    (le16_to_cpu(path->usConnObjectId) & OBJECT_ID_MASK)
+			    >> OBJECT_ID_SHIFT;
+			con_obj_num =
+			    (le16_to_cpu(path->usConnObjectId) & ENUM_ID_MASK)
+			    >> ENUM_ID_SHIFT;
+			con_obj_type =
+			    (le16_to_cpu(path->usConnObjectId) &
+			     OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
+
+			if ((le16_to_cpu(path->usDeviceTag) ==
+			     ATOM_DEVICE_TV1_SUPPORT)
+			    || (le16_to_cpu(path->usDeviceTag) ==
+				ATOM_DEVICE_TV2_SUPPORT)
+			    || (le16_to_cpu(path->usDeviceTag) ==
+				ATOM_DEVICE_CV_SUPPORT))
+				continue;
+
+			if ((rdev->family == CHIP_RS780) &&
+			    (con_obj_id ==
+			     CONNECTOR_OBJECT_ID_PCIE_CONNECTOR)) {
+				uint16_t igp_offset = 0;
+				ATOM_INTEGRATED_SYSTEM_INFO_V2 *igp_obj;
+
+				index =
+				    GetIndexIntoMasterTable(DATA,
+							    IntegratedSystemInfo);
+
+				atom_parse_data_header(ctx, index, &size, &frev,
+						       &crev, &igp_offset);
+
+				if (crev >= 2) {
+					igp_obj =
+					    (ATOM_INTEGRATED_SYSTEM_INFO_V2
+					     *) (ctx->bios + igp_offset);
+
+					if (igp_obj) {
+						uint32_t slot_config, ct;
+
+						if (con_obj_num == 1)
+							slot_config =
+							    igp_obj->
+							    ulDDISlot1Config;
+						else
+							slot_config =
+							    igp_obj->
+							    ulDDISlot2Config;
+
+						ct = (slot_config >> 16) & 0xff;
+						connector_type =
+						    object_connector_convert
+						    [ct];
+						igp_lane_info =
+						    slot_config & 0xffff;
+					} else
+						continue;
+				} else
+					continue;
+			} else {
+				igp_lane_info = 0;
+				connector_type =
+				    object_connector_convert[con_obj_id];
+			}
+
+			if (connector_type == DRM_MODE_CONNECTOR_Unknown)
+				continue;
+
+			for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2);
+			     j++) {
+				uint8_t enc_obj_id, enc_obj_num, enc_obj_type;
+
+				enc_obj_id =
+				    (le16_to_cpu(path->usGraphicObjIds[j]) &
+				     OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+				enc_obj_num =
+				    (le16_to_cpu(path->usGraphicObjIds[j]) &
+				     ENUM_ID_MASK) >> ENUM_ID_SHIFT;
+				enc_obj_type =
+				    (le16_to_cpu(path->usGraphicObjIds[j]) &
+				     OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
+
+				/* FIXME: add support for router objects */
+				if (enc_obj_type == GRAPH_OBJECT_TYPE_ENCODER) {
+					if (enc_obj_num == 2)
+						linkb = true;
+					else
+						linkb = false;
+
+					radeon_add_atom_encoder(dev,
+								enc_obj_id,
+								le16_to_cpu
+								(path->
+								 usDeviceTag));
+
+				}
+			}
+
+			/* look up gpio for ddc */
+			if ((le16_to_cpu(path->usDeviceTag) &
+			     (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
+			    == 0) {
+				for (j = 0; j < con_obj->ucNumberOfObjects; j++) {
+					if (le16_to_cpu(path->usConnObjectId) ==
+					    le16_to_cpu(con_obj->asObjects[j].
+							usObjectID)) {
+						ATOM_COMMON_RECORD_HEADER
+						    *record =
+						    (ATOM_COMMON_RECORD_HEADER
+						     *)
+						    (ctx->bios + data_offset +
+						     le16_to_cpu(con_obj->
+								 asObjects[j].
+								 usRecordOffset));
+						ATOM_I2C_RECORD *i2c_record;
+
+						while (record->ucRecordType > 0
+						       && record->
+						       ucRecordType <=
+						       ATOM_MAX_OBJECT_RECORD_NUMBER) {
+							DRM_ERROR
+							    ("record type %d\n",
+							     record->
+							     ucRecordType);
+							switch (record->
+								ucRecordType) {
+							case ATOM_I2C_RECORD_TYPE:
+								i2c_record =
+								    (ATOM_I2C_RECORD
+								     *) record;
+								line_mux =
+								    i2c_record->
+								    sucI2cId.
+								    bfI2C_LineMux;
+								break;
+							}
+							record =
+							    (ATOM_COMMON_RECORD_HEADER
+							     *) ((char *)record
+								 +
+								 record->
+								 ucRecordSize);
+						}
+						break;
+					}
+				}
+			} else
+				line_mux = 0;
+
+			if ((le16_to_cpu(path->usDeviceTag) ==
+			     ATOM_DEVICE_TV1_SUPPORT)
+			    || (le16_to_cpu(path->usDeviceTag) ==
+				ATOM_DEVICE_TV2_SUPPORT)
+			    || (le16_to_cpu(path->usDeviceTag) ==
+				ATOM_DEVICE_CV_SUPPORT))
+				ddc_bus.valid = false;
+			else
+				ddc_bus = radeon_lookup_gpio(dev, line_mux);
+
+			radeon_add_atom_connector(dev,
+						  le16_to_cpu(path->
+							      usConnObjectId),
+						  le16_to_cpu(path->
+							      usDeviceTag),
+						  connector_type, &ddc_bus,
+						  linkb, igp_lane_info);
+
+		}
+	}
+
+	radeon_link_encoder_connector(dev);
+
+	return true;
+}
+
+struct bios_connector {
+	bool valid;
+	uint8_t line_mux;
+	uint16_t devices;
+	int connector_type;
+	struct radeon_i2c_bus_rec ddc_bus;
+};
+
+bool radeon_get_atom_connector_info_from_supported_devices_table(struct
+								 drm_device
+								 *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_mode_info *mode_info = &rdev->mode_info;
+	struct atom_context *ctx = mode_info->atom_context;
+	int index = GetIndexIntoMasterTable(DATA, SupportedDevicesInfo);
+	uint16_t size, data_offset;
+	uint8_t frev, crev;
+	uint16_t device_support;
+	uint8_t dac;
+	union atom_supported_devices *supported_devices;
+	int i, j;
+	struct bios_connector bios_connectors[ATOM_MAX_SUPPORTED_DEVICE];
+
+	atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset);
+
+	supported_devices =
+	    (union atom_supported_devices *)(ctx->bios + data_offset);
+
+	device_support = le16_to_cpu(supported_devices->info.usDeviceSupport);
+
+	for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) {
+		ATOM_CONNECTOR_INFO_I2C ci =
+		    supported_devices->info.asConnInfo[i];
+
+		bios_connectors[i].valid = false;
+
+		if (!(device_support & (1 << i))) {
+			continue;
+		}
+
+		if (i == ATOM_DEVICE_CV_INDEX) {
+			DRM_DEBUG("Skipping Component Video\n");
+			continue;
+		}
+
+		if (i == ATOM_DEVICE_TV1_INDEX) {
+			DRM_DEBUG("Skipping TV Out\n");
+			continue;
+		}
+
+		bios_connectors[i].connector_type =
+		    supported_devices_connector_convert[ci.sucConnectorInfo.
+							sbfAccess.
+							bfConnectorType];
+
+		if (bios_connectors[i].connector_type ==
+		    DRM_MODE_CONNECTOR_Unknown)
+			continue;
+
+		dac = ci.sucConnectorInfo.sbfAccess.bfAssociatedDAC;
+
+		if ((rdev->family == CHIP_RS690) ||
+		    (rdev->family == CHIP_RS740)) {
+			if ((i == ATOM_DEVICE_DFP2_INDEX)
+			    && (ci.sucI2cId.sbfAccess.bfI2C_LineMux == 2))
+				bios_connectors[i].line_mux =
+				    ci.sucI2cId.sbfAccess.bfI2C_LineMux + 1;
+			else if ((i == ATOM_DEVICE_DFP3_INDEX)
+				 && (ci.sucI2cId.sbfAccess.bfI2C_LineMux == 1))
+				bios_connectors[i].line_mux =
+				    ci.sucI2cId.sbfAccess.bfI2C_LineMux + 1;
+			else
+				bios_connectors[i].line_mux =
+				    ci.sucI2cId.sbfAccess.bfI2C_LineMux;
+		} else
+			bios_connectors[i].line_mux =
+			    ci.sucI2cId.sbfAccess.bfI2C_LineMux;
+
+		/* give tv unique connector ids */
+		if (i == ATOM_DEVICE_TV1_INDEX) {
+			bios_connectors[i].ddc_bus.valid = false;
+			bios_connectors[i].line_mux = 50;
+		} else if (i == ATOM_DEVICE_TV2_INDEX) {
+			bios_connectors[i].ddc_bus.valid = false;
+			bios_connectors[i].line_mux = 51;
+		} else if (i == ATOM_DEVICE_CV_INDEX) {
+			bios_connectors[i].ddc_bus.valid = false;
+			bios_connectors[i].line_mux = 52;
+		} else
+			bios_connectors[i].ddc_bus =
+			    radeon_lookup_gpio(dev,
+					       bios_connectors[i].line_mux);
+
+		/* Always set the connector type to VGA for CRT1/CRT2. if they are
+		 * shared with a DVI port, we'll pick up the DVI connector when we
+		 * merge the outputs.  Some bioses incorrectly list VGA ports as DVI.
+		 */
+		if (i == ATOM_DEVICE_CRT1_INDEX || i == ATOM_DEVICE_CRT2_INDEX)
+			bios_connectors[i].connector_type =
+			    DRM_MODE_CONNECTOR_VGA;
+
+		if (!radeon_atom_apply_quirks
+		    (dev, (1 << i), &bios_connectors[i].connector_type,
+		     &bios_connectors[i].ddc_bus))
+			continue;
+
+		bios_connectors[i].valid = true;
+		bios_connectors[i].devices = (1 << i);
+
+		if (ASIC_IS_AVIVO(rdev) || radeon_r4xx_atom)
+			radeon_add_atom_encoder(dev,
+						radeon_get_encoder_id(dev,
+								      (1 << i),
+								      dac),
+						(1 << i));
+		else
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									(1 <<
+									 i),
+									dac),
+						  (1 << i));
+	}
+
+	/* combine shared connectors */
+	for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) {
+		if (bios_connectors[i].valid) {
+			for (j = 0; j < ATOM_MAX_SUPPORTED_DEVICE; j++) {
+				if (bios_connectors[j].valid && (i != j)) {
+					if (bios_connectors[i].line_mux ==
+					    bios_connectors[j].line_mux) {
+						if (((bios_connectors[i].
+						      devices &
+						      (ATOM_DEVICE_DFP_SUPPORT))
+						     && (bios_connectors[j].
+							 devices &
+							 (ATOM_DEVICE_CRT_SUPPORT)))
+						    ||
+						    ((bios_connectors[j].
+						      devices &
+						      (ATOM_DEVICE_DFP_SUPPORT))
+						     && (bios_connectors[i].
+							 devices &
+							 (ATOM_DEVICE_CRT_SUPPORT)))) {
+							bios_connectors[i].
+							    devices |=
+							    bios_connectors[j].
+							    devices;
+							bios_connectors[i].
+							    connector_type =
+							    DRM_MODE_CONNECTOR_DVII;
+							bios_connectors[j].
+							    valid = false;
+						}
+					}
+				}
+			}
+		}
+	}
+
+	/* add the connectors */
+	for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) {
+		if (bios_connectors[i].valid)
+			radeon_add_atom_connector(dev,
+						  bios_connectors[i].line_mux,
+						  bios_connectors[i].devices,
+						  bios_connectors[i].
+						  connector_type,
+						  &bios_connectors[i].ddc_bus,
+						  false, 0);
+	}
+
+	radeon_link_encoder_connector(dev);
+
+	return true;
+}
+
+union firmware_info {
+	ATOM_FIRMWARE_INFO info;
+	ATOM_FIRMWARE_INFO_V1_2 info_12;
+	ATOM_FIRMWARE_INFO_V1_3 info_13;
+	ATOM_FIRMWARE_INFO_V1_4 info_14;
+};
+
+bool radeon_atom_get_clock_info(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_mode_info *mode_info = &rdev->mode_info;
+	int index = GetIndexIntoMasterTable(DATA, FirmwareInfo);
+	union firmware_info *firmware_info;
+	uint8_t frev, crev;
+	struct radeon_pll *p1pll = &rdev->clock.p1pll;
+	struct radeon_pll *p2pll = &rdev->clock.p2pll;
+	struct radeon_pll *spll = &rdev->clock.spll;
+	struct radeon_pll *mpll = &rdev->clock.mpll;
+	uint16_t data_offset;
+
+	atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
+			       &crev, &data_offset);
+
+	firmware_info =
+	    (union firmware_info *)(mode_info->atom_context->bios +
+				    data_offset);
+
+	if (firmware_info) {
+		/* pixel clocks */
+		p1pll->reference_freq =
+		    le16_to_cpu(firmware_info->info.usReferenceClock);
+		p1pll->reference_div = 0;
+
+		p1pll->pll_out_min =
+		    le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output);
+		p1pll->pll_out_max =
+		    le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output);
+
+		if (p1pll->pll_out_min == 0) {
+			if (ASIC_IS_AVIVO(rdev))
+				p1pll->pll_out_min = 64800;
+			else
+				p1pll->pll_out_min = 20000;
+		}
+
+		p1pll->pll_in_min =
+		    le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Input);
+		p1pll->pll_in_max =
+		    le16_to_cpu(firmware_info->info.usMaxPixelClockPLL_Input);
+
+		*p2pll = *p1pll;
+
+		/* system clock */
+		spll->reference_freq =
+		    le16_to_cpu(firmware_info->info.usReferenceClock);
+		spll->reference_div = 0;
+
+		spll->pll_out_min =
+		    le16_to_cpu(firmware_info->info.usMinEngineClockPLL_Output);
+		spll->pll_out_max =
+		    le32_to_cpu(firmware_info->info.ulMaxEngineClockPLL_Output);
+
+		/* ??? */
+		if (spll->pll_out_min == 0) {
+			if (ASIC_IS_AVIVO(rdev))
+				spll->pll_out_min = 64800;
+			else
+				spll->pll_out_min = 20000;
+		}
+
+		spll->pll_in_min =
+		    le16_to_cpu(firmware_info->info.usMinEngineClockPLL_Input);
+		spll->pll_in_max =
+		    le16_to_cpu(firmware_info->info.usMaxEngineClockPLL_Input);
+
+		/* memory clock */
+		mpll->reference_freq =
+		    le16_to_cpu(firmware_info->info.usReferenceClock);
+		mpll->reference_div = 0;
+
+		mpll->pll_out_min =
+		    le16_to_cpu(firmware_info->info.usMinMemoryClockPLL_Output);
+		mpll->pll_out_max =
+		    le32_to_cpu(firmware_info->info.ulMaxMemoryClockPLL_Output);
+
+		/* ??? */
+		if (mpll->pll_out_min == 0) {
+			if (ASIC_IS_AVIVO(rdev))
+				mpll->pll_out_min = 64800;
+			else
+				mpll->pll_out_min = 20000;
+		}
+
+		mpll->pll_in_min =
+		    le16_to_cpu(firmware_info->info.usMinMemoryClockPLL_Input);
+		mpll->pll_in_max =
+		    le16_to_cpu(firmware_info->info.usMaxMemoryClockPLL_Input);
+
+		rdev->clock.default_sclk =
+		    le32_to_cpu(firmware_info->info.ulDefaultEngineClock);
+		rdev->clock.default_mclk =
+		    le32_to_cpu(firmware_info->info.ulDefaultMemoryClock);
+
+		return true;
+	}
+	return false;
+}
+
+struct radeon_encoder_int_tmds *radeon_atombios_get_tmds_info(struct
+							      radeon_encoder
+							      *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_mode_info *mode_info = &rdev->mode_info;
+	int index = GetIndexIntoMasterTable(DATA, TMDS_Info);
+	uint16_t data_offset;
+	struct _ATOM_TMDS_INFO *tmds_info;
+	uint8_t frev, crev;
+	uint16_t maxfreq;
+	int i;
+	struct radeon_encoder_int_tmds *tmds = NULL;
+
+	atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
+			       &crev, &data_offset);
+
+	tmds_info =
+	    (struct _ATOM_TMDS_INFO *)(mode_info->atom_context->bios +
+				       data_offset);
+
+	if (tmds_info) {
+		tmds =
+		    kzalloc(sizeof(struct radeon_encoder_int_tmds), GFP_KERNEL);
+
+		if (!tmds)
+			return NULL;
+
+		maxfreq = le16_to_cpu(tmds_info->usMaxFrequency);
+		for (i = 0; i < 4; i++) {
+			tmds->tmds_pll[i].freq =
+			    le16_to_cpu(tmds_info->asMiscInfo[i].usFrequency);
+			tmds->tmds_pll[i].value =
+			    tmds_info->asMiscInfo[i].ucPLL_ChargePump & 0x3f;
+			tmds->tmds_pll[i].value |=
+			    (tmds_info->asMiscInfo[i].
+			     ucPLL_VCO_Gain & 0x3f) << 6;
+			tmds->tmds_pll[i].value |=
+			    (tmds_info->asMiscInfo[i].
+			     ucPLL_DutyCycle & 0xf) << 12;
+			tmds->tmds_pll[i].value |=
+			    (tmds_info->asMiscInfo[i].
+			     ucPLL_VoltageSwing & 0xf) << 16;
+
+			DRM_DEBUG("TMDS PLL From ATOMBIOS %u %x\n",
+				  tmds->tmds_pll[i].freq,
+				  tmds->tmds_pll[i].value);
+
+			if (maxfreq == tmds->tmds_pll[i].freq) {
+				tmds->tmds_pll[i].freq = 0xffffffff;
+				break;
+			}
+		}
+	}
+	return tmds;
+}
+
+union lvds_info {
+	struct _ATOM_LVDS_INFO info;
+	struct _ATOM_LVDS_INFO_V12 info_12;
+};
+
+struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct
+							      radeon_encoder
+							      *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_mode_info *mode_info = &rdev->mode_info;
+	int index = GetIndexIntoMasterTable(DATA, LVDS_Info);
+	uint16_t data_offset;
+	union lvds_info *lvds_info;
+	uint8_t frev, crev;
+	struct radeon_encoder_atom_dig *lvds = NULL;
+
+	atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
+			       &crev, &data_offset);
+
+	lvds_info =
+	    (union lvds_info *)(mode_info->atom_context->bios + data_offset);
+
+	if (lvds_info) {
+		lvds =
+		    kzalloc(sizeof(struct radeon_encoder_atom_dig), GFP_KERNEL);
+
+		if (!lvds)
+			return NULL;
+
+		lvds->native_mode.dotclock =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usPixClk) * 10;
+		lvds->native_mode.panel_xres =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usHActive);
+		lvds->native_mode.panel_yres =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usVActive);
+		lvds->native_mode.hblank =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time);
+		lvds->native_mode.hoverplus =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset);
+		lvds->native_mode.hsync_width =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth);
+		lvds->native_mode.vblank =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time);
+		lvds->native_mode.voverplus =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncOffset);
+		lvds->native_mode.vsync_width =
+		    le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth);
+		lvds->panel_pwr_delay =
+		    le16_to_cpu(lvds_info->info.usOffDelayInMs);
+		lvds->lvds_misc = lvds_info->info.ucLVDS_Misc;
+
+		encoder->native_mode = lvds->native_mode;
+	}
+	return lvds;
+}
+
+struct radeon_encoder_primary_dac *
+radeon_atombios_get_primary_dac_info(struct radeon_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_mode_info *mode_info = &rdev->mode_info;
+	int index = GetIndexIntoMasterTable(DATA, CompassionateData);
+	uint16_t data_offset;
+	struct _COMPASSIONATE_DATA *dac_info;
+	uint8_t frev, crev;
+	uint8_t bg, dac;
+	int i;
+	struct radeon_encoder_primary_dac *p_dac = NULL;
+
+	atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset);
+
+	dac_info = (struct _COMPASSIONATE_DATA *)(mode_info->atom_context->bios + data_offset);
+
+	if (dac_info) {
+		p_dac = kzalloc(sizeof(struct radeon_encoder_primary_dac), GFP_KERNEL);
+
+		if (!p_dac)
+			return NULL;
+
+		bg = dac_info->ucDAC1_BG_Adjustment;
+		dac = dac_info->ucDAC1_DAC_Adjustment;
+		p_dac->ps2_pdac_adj = (bg << 8) | (dac);
+
+	}
+	return p_dac;
+}
+
+struct radeon_encoder_tv_dac *
+radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_mode_info *mode_info = &rdev->mode_info;
+	int index = GetIndexIntoMasterTable(DATA, CompassionateData);
+	uint16_t data_offset;
+	struct _COMPASSIONATE_DATA *dac_info;
+	uint8_t frev, crev;
+	uint8_t bg, dac;
+	int i;
+	struct radeon_encoder_tv_dac *tv_dac = NULL;
+
+	atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset);
+
+	dac_info = (struct _COMPASSIONATE_DATA *)(mode_info->atom_context->bios + data_offset);
+
+	if (dac_info) {
+		tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
+
+		if (!tv_dac)
+			return NULL;
+
+		bg = dac_info->ucDAC2_CRT2_BG_Adjustment;
+		dac = dac_info->ucDAC2_CRT2_DAC_Adjustment;
+		tv_dac->ps2_tvdac_adj = (bg << 16) | (dac << 20);
+
+		bg = dac_info->ucDAC2_PAL_BG_Adjustment;
+		dac = dac_info->ucDAC2_PAL_DAC_Adjustment;
+		tv_dac->pal_tvdac_adj = (bg << 16) | (dac << 20);
+
+		bg = dac_info->ucDAC2_NTSC_BG_Adjustment;
+		dac = dac_info->ucDAC2_NTSC_DAC_Adjustment;
+		tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+
+	}
+	return tv_dac;
+}
+
+void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable)
+{
+	DYNAMIC_CLOCK_GATING_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, DynamicClockGating);
+
+	args.ucEnable = enable;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+void radeon_atom_static_pwrmgt_setup(struct radeon_device *rdev, int enable)
+{
+	ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, EnableASIC_StaticPwrMgt);
+
+	args.ucEnable = enable;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+void radeon_atom_set_engine_clock(struct radeon_device *rdev,
+				  uint32_t eng_clock)
+{
+	SET_ENGINE_CLOCK_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, SetEngineClock);
+
+	args.ulTargetEngineClock = eng_clock;	/* 10 khz */
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+void radeon_atom_set_memory_clock(struct radeon_device *rdev,
+				  uint32_t mem_clock)
+{
+	SET_MEMORY_CLOCK_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, SetMemoryClock);
+
+	if (rdev->flags & RADEON_IS_IGP)
+		return;
+
+	args.ulTargetMemoryClock = mem_clock;	/* 10 khz */
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t bios_2_scratch, bios_6_scratch;
+
+	if (rdev->family >= CHIP_R600) {
+		bios_2_scratch = RREG32(R600_BIOS_0_SCRATCH);
+		bios_6_scratch = RREG32(R600_BIOS_6_SCRATCH);
+	} else {
+		bios_2_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
+		bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
+	}
+
+	/* let the bios control the backlight */
+	bios_2_scratch &= ~ATOM_S2_VRI_BRIGHT_ENABLE;
+
+	/* tell the bios not to handle mode switching */
+	bios_6_scratch |= (ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH | ATOM_S6_ACC_MODE);
+
+	if (rdev->family >= CHIP_R600) {
+		WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch);
+		WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);
+	} else {
+		WREG32(RADEON_BIOS_2_SCRATCH, bios_2_scratch);
+		WREG32(RADEON_BIOS_6_SCRATCH, bios_6_scratch);
+	}
+
+}
+
+void radeon_atom_output_lock(struct drm_encoder *encoder, bool lock)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t bios_6_scratch;
+
+	if (rdev->family >= CHIP_R600)
+		bios_6_scratch = RREG32(R600_BIOS_6_SCRATCH);
+	else
+		bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
+
+	if (lock)
+		bios_6_scratch |= ATOM_S6_CRITICAL_STATE;
+	else
+		bios_6_scratch &= ~ATOM_S6_CRITICAL_STATE;
+
+	if (rdev->family >= CHIP_R600)
+		WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);
+	else
+		WREG32(RADEON_BIOS_6_SCRATCH, bios_6_scratch);
+}
+
+/* at some point we may want to break this out into individual functions */
+void
+radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
+				       struct drm_encoder *encoder,
+				       bool connected)
+{
+	struct drm_device *dev = connector->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_connector *radeon_connector =
+	    to_radeon_connector(connector);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t bios_0_scratch, bios_3_scratch, bios_6_scratch;
+
+	if (rdev->family >= CHIP_R600) {
+		bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
+		bios_3_scratch = RREG32(R600_BIOS_3_SCRATCH);
+		bios_6_scratch = RREG32(R600_BIOS_6_SCRATCH);
+	} else {
+		bios_0_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
+		bios_3_scratch = RREG32(RADEON_BIOS_3_SCRATCH);
+		bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
+	}
+
+	if ((radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("TV1 connected\n");
+			bios_3_scratch |= ATOM_S3_TV1_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_TV1;
+		} else {
+			DRM_DEBUG("TV1 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_TV1_MASK;
+			bios_3_scratch &= ~ATOM_S3_TV1_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_TV1;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_CV_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("CV connected\n");
+			bios_3_scratch |= ATOM_S3_CV_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_CV;
+		} else {
+			DRM_DEBUG("CV disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_CV_MASK;
+			bios_3_scratch &= ~ATOM_S3_CV_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_CV;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_LCD1_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("LCD1 connected\n");
+			bios_0_scratch |= ATOM_S0_LCD1;
+			bios_3_scratch |= ATOM_S3_LCD1_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_LCD1;
+		} else {
+			DRM_DEBUG("LCD1 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_LCD1;
+			bios_3_scratch &= ~ATOM_S3_LCD1_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_LCD1;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("CRT1 connected\n");
+			bios_0_scratch |= ATOM_S0_CRT1_COLOR;
+			bios_3_scratch |= ATOM_S3_CRT1_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_CRT1;
+		} else {
+			DRM_DEBUG("CRT1 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_CRT1_MASK;
+			bios_3_scratch &= ~ATOM_S3_CRT1_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_CRT1;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("CRT2 connected\n");
+			bios_0_scratch |= ATOM_S0_CRT2_COLOR;
+			bios_3_scratch |= ATOM_S3_CRT2_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_CRT2;
+		} else {
+			DRM_DEBUG("CRT2 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_CRT2_MASK;
+			bios_3_scratch &= ~ATOM_S3_CRT2_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_CRT2;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_DFP1_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_DFP1_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("DFP1 connected\n");
+			bios_0_scratch |= ATOM_S0_DFP1;
+			bios_3_scratch |= ATOM_S3_DFP1_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP1;
+		} else {
+			DRM_DEBUG("DFP1 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_DFP1;
+			bios_3_scratch &= ~ATOM_S3_DFP1_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP1;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_DFP2_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_DFP2_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("DFP2 connected\n");
+			bios_0_scratch |= ATOM_S0_DFP2;
+			bios_3_scratch |= ATOM_S3_DFP2_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP2;
+		} else {
+			DRM_DEBUG("DFP2 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_DFP2;
+			bios_3_scratch &= ~ATOM_S3_DFP2_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP2;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_DFP3_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_DFP3_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("DFP3 connected\n");
+			bios_0_scratch |= ATOM_S0_DFP3;
+			bios_3_scratch |= ATOM_S3_DFP3_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP3;
+		} else {
+			DRM_DEBUG("DFP3 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_DFP3;
+			bios_3_scratch &= ~ATOM_S3_DFP3_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP3;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_DFP4_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_DFP4_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("DFP4 connected\n");
+			bios_0_scratch |= ATOM_S0_DFP4;
+			bios_3_scratch |= ATOM_S3_DFP4_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP4;
+		} else {
+			DRM_DEBUG("DFP4 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_DFP4;
+			bios_3_scratch &= ~ATOM_S3_DFP4_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP4;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_DFP5_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_DFP5_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("DFP5 connected\n");
+			bios_0_scratch |= ATOM_S0_DFP5;
+			bios_3_scratch |= ATOM_S3_DFP5_ACTIVE;
+			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP5;
+		} else {
+			DRM_DEBUG("DFP5 disconnected\n");
+			bios_0_scratch &= ~ATOM_S0_DFP5;
+			bios_3_scratch &= ~ATOM_S3_DFP5_ACTIVE;
+			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP5;
+		}
+	}
+
+	if (rdev->family >= CHIP_R600) {
+		WREG32(R600_BIOS_0_SCRATCH, bios_0_scratch);
+		WREG32(R600_BIOS_3_SCRATCH, bios_3_scratch);
+		WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);
+	} else {
+		WREG32(RADEON_BIOS_0_SCRATCH, bios_0_scratch);
+		WREG32(RADEON_BIOS_3_SCRATCH, bios_3_scratch);
+		WREG32(RADEON_BIOS_6_SCRATCH, bios_6_scratch);
+	}
+}
+
+void
+radeon_atombios_encoder_crtc_scratch_regs(struct drm_encoder *encoder, int crtc)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t bios_3_scratch;
+
+	if (rdev->family >= CHIP_R600)
+		bios_3_scratch = RREG32(R600_BIOS_3_SCRATCH);
+	else
+		bios_3_scratch = RREG32(RADEON_BIOS_3_SCRATCH);
+
+	if (radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) {
+		bios_3_scratch &= ~ATOM_S3_TV1_CRTC_ACTIVE;
+		bios_3_scratch |= (crtc << 18);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_CV_SUPPORT) {
+		bios_3_scratch &= ~ATOM_S3_CV_CRTC_ACTIVE;
+		bios_3_scratch |= (crtc << 24);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+		bios_3_scratch &= ~ATOM_S3_CRT1_CRTC_ACTIVE;
+		bios_3_scratch |= (crtc << 16);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+		bios_3_scratch &= ~ATOM_S3_CRT2_CRTC_ACTIVE;
+		bios_3_scratch |= (crtc << 20);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) {
+		bios_3_scratch &= ~ATOM_S3_LCD1_CRTC_ACTIVE;
+		bios_3_scratch |= (crtc << 17);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP1_SUPPORT) {
+		bios_3_scratch &= ~ATOM_S3_DFP1_CRTC_ACTIVE;
+		bios_3_scratch |= (crtc << 19);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP2_SUPPORT) {
+		bios_3_scratch &= ~ATOM_S3_DFP2_CRTC_ACTIVE;
+		bios_3_scratch |= (crtc << 23);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP3_SUPPORT) {
+		bios_3_scratch &= ~ATOM_S3_DFP3_CRTC_ACTIVE;
+		bios_3_scratch |= (crtc << 25);
+	}
+
+	if (rdev->family >= CHIP_R600)
+		WREG32(R600_BIOS_3_SCRATCH, bios_3_scratch);
+	else
+		WREG32(RADEON_BIOS_3_SCRATCH, bios_3_scratch);
+}
+
+void
+radeon_atombios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t bios_2_scratch;
+
+	if (rdev->family >= CHIP_R600)
+		bios_2_scratch = RREG32(R600_BIOS_2_SCRATCH);
+	else
+		bios_2_scratch = RREG32(RADEON_BIOS_2_SCRATCH);
+
+	if (radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_TV1_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_TV1_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_CV_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_CV_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_CV_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_CRT1_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_CRT1_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_CRT2_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_CRT2_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_LCD1_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_LCD1_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP1_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_DFP1_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_DFP1_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP2_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_DFP2_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_DFP2_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP3_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_DFP3_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_DFP3_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP4_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_DFP4_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_DFP4_DPMS_STATE;
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP5_SUPPORT) {
+		if (on)
+			bios_2_scratch &= ~ATOM_S2_DFP5_DPMS_STATE;
+		else
+			bios_2_scratch |= ATOM_S2_DFP5_DPMS_STATE;
+	}
+
+	if (rdev->family >= CHIP_R600)
+		WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch);
+	else
+		WREG32(RADEON_BIOS_2_SCRATCH, bios_2_scratch);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
new file mode 100644
index 00000000000..c44403a2ca7
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Jerome Glisse
+ */
+#include <drm/drmP.h>
+#include <drm/radeon_drm.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+
+void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
+			   unsigned sdomain, unsigned ddomain)
+{
+	struct radeon_object *dobj = NULL;
+	struct radeon_object *sobj = NULL;
+	struct radeon_fence *fence = NULL;
+	uint64_t saddr, daddr;
+	unsigned long start_jiffies;
+	unsigned long end_jiffies;
+	unsigned long time;
+	unsigned i, n, size;
+	int r;
+
+	size = bsize;
+	n = 1024;
+	r = radeon_object_create(rdev, NULL, size, true, sdomain, false, &sobj);
+	if (r) {
+		goto out_cleanup;
+	}
+	r = radeon_object_pin(sobj, sdomain, &saddr);
+	if (r) {
+		goto out_cleanup;
+	}
+	r = radeon_object_create(rdev, NULL, size, true, ddomain, false, &dobj);
+	if (r) {
+		goto out_cleanup;
+	}
+	r = radeon_object_pin(dobj, ddomain, &daddr);
+	if (r) {
+		goto out_cleanup;
+	}
+	start_jiffies = jiffies;
+	for (i = 0; i < n; i++) {
+		r = radeon_fence_create(rdev, &fence);
+		if (r) {
+			goto out_cleanup;
+		}
+		r = radeon_copy_dma(rdev, saddr, daddr, size >> 14, fence);
+		if (r) {
+			goto out_cleanup;
+		}
+		r = radeon_fence_wait(fence, false);
+		if (r) {
+			goto out_cleanup;
+		}
+		radeon_fence_unref(&fence);
+	}
+	end_jiffies = jiffies;
+	time = end_jiffies - start_jiffies;
+	time = jiffies_to_msecs(time);
+	if (time > 0) {
+		i = ((n * size) >> 10) / time;
+		printk(KERN_INFO "radeon: dma %u bo moves of %ukb from %d to %d"
+		       " in %lums (%ukb/ms %ukb/s %uM/s)\n", n, size >> 10,
+		       sdomain, ddomain, time, i, i * 1000, (i * 1000) / 1024);
+	}
+	start_jiffies = jiffies;
+	for (i = 0; i < n; i++) {
+		r = radeon_fence_create(rdev, &fence);
+		if (r) {
+			goto out_cleanup;
+		}
+		r = radeon_copy_blit(rdev, saddr, daddr, size >> 14, fence);
+		if (r) {
+			goto out_cleanup;
+		}
+		r = radeon_fence_wait(fence, false);
+		if (r) {
+			goto out_cleanup;
+		}
+		radeon_fence_unref(&fence);
+	}
+	end_jiffies = jiffies;
+	time = end_jiffies - start_jiffies;
+	time = jiffies_to_msecs(time);
+	if (time > 0) {
+		i = ((n * size) >> 10) / time;
+		printk(KERN_INFO "radeon: blit %u bo moves of %ukb from %d to %d"
+		       " in %lums (%ukb/ms %ukb/s %uM/s)\n", n, size >> 10,
+		       sdomain, ddomain, time, i, i * 1000, (i * 1000) / 1024);
+	}
+out_cleanup:
+	if (sobj) {
+		radeon_object_unpin(sobj);
+		radeon_object_unref(&sobj);
+	}
+	if (dobj) {
+		radeon_object_unpin(dobj);
+		radeon_object_unref(&dobj);
+	}
+	if (fence) {
+		radeon_fence_unref(&fence);
+	}
+	if (r) {
+		printk(KERN_WARNING "Error while benchmarking BO move.\n");
+	}
+}
+
+void radeon_benchmark(struct radeon_device *rdev)
+{
+	radeon_benchmark_move(rdev, 1024*1024, RADEON_GEM_DOMAIN_GTT,
+			      RADEON_GEM_DOMAIN_VRAM);
+	radeon_benchmark_move(rdev, 1024*1024, RADEON_GEM_DOMAIN_VRAM,
+			      RADEON_GEM_DOMAIN_GTT);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
new file mode 100644
index 00000000000..96e37a6e7ce
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -0,0 +1,390 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+#include "atom.h"
+
+/*
+ * BIOS.
+ */
+static bool radeon_read_bios(struct radeon_device *rdev)
+{
+	uint8_t __iomem *bios;
+	size_t size;
+
+	rdev->bios = NULL;
+	bios = pci_map_rom(rdev->pdev, &size);
+	if (!bios) {
+		return false;
+	}
+
+	if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+		pci_unmap_rom(rdev->pdev, bios);
+		return false;
+	}
+	rdev->bios = kmalloc(size, GFP_KERNEL);
+	if (rdev->bios == NULL) {
+		pci_unmap_rom(rdev->pdev, bios);
+		return false;
+	}
+	memcpy(rdev->bios, bios, size);
+	pci_unmap_rom(rdev->pdev, bios);
+	return true;
+}
+
+static bool r700_read_disabled_bios(struct radeon_device *rdev)
+{
+	uint32_t viph_control;
+	uint32_t bus_cntl;
+	uint32_t d1vga_control;
+	uint32_t d2vga_control;
+	uint32_t vga_render_control;
+	uint32_t rom_cntl;
+	uint32_t cg_spll_func_cntl = 0;
+	uint32_t cg_spll_status;
+	bool r;
+
+	viph_control = RREG32(RADEON_VIPH_CONTROL);
+	bus_cntl = RREG32(RADEON_BUS_CNTL);
+	d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
+	d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
+	vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
+	rom_cntl = RREG32(R600_ROM_CNTL);
+
+	/* disable VIP */
+	WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
+	/* enable the rom */
+	WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+	/* Disable VGA mode */
+	WREG32(AVIVO_D1VGA_CONTROL,
+	       (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+		AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+	WREG32(AVIVO_D2VGA_CONTROL,
+	       (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+		AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+	WREG32(AVIVO_VGA_RENDER_CONTROL,
+	       (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK));
+
+	if (rdev->family == CHIP_RV730) {
+		cg_spll_func_cntl = RREG32(R600_CG_SPLL_FUNC_CNTL);
+
+		/* enable bypass mode */
+		WREG32(R600_CG_SPLL_FUNC_CNTL, (cg_spll_func_cntl |
+						R600_SPLL_BYPASS_EN));
+
+		/* wait for SPLL_CHG_STATUS to change to 1 */
+		cg_spll_status = 0;
+		while (!(cg_spll_status & R600_SPLL_CHG_STATUS))
+			cg_spll_status = RREG32(R600_CG_SPLL_STATUS);
+
+		WREG32(R600_ROM_CNTL, (rom_cntl & ~R600_SCK_OVERWRITE));
+	} else
+		WREG32(R600_ROM_CNTL, (rom_cntl | R600_SCK_OVERWRITE));
+
+	r = radeon_read_bios(rdev);
+
+	/* restore regs */
+	if (rdev->family == CHIP_RV730) {
+		WREG32(R600_CG_SPLL_FUNC_CNTL, cg_spll_func_cntl);
+
+		/* wait for SPLL_CHG_STATUS to change to 1 */
+		cg_spll_status = 0;
+		while (!(cg_spll_status & R600_SPLL_CHG_STATUS))
+			cg_spll_status = RREG32(R600_CG_SPLL_STATUS);
+	}
+	WREG32(RADEON_VIPH_CONTROL, viph_control);
+	WREG32(RADEON_BUS_CNTL, bus_cntl);
+	WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
+	WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
+	WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
+	WREG32(R600_ROM_CNTL, rom_cntl);
+	return r;
+}
+
+static bool r600_read_disabled_bios(struct radeon_device *rdev)
+{
+	uint32_t viph_control;
+	uint32_t bus_cntl;
+	uint32_t d1vga_control;
+	uint32_t d2vga_control;
+	uint32_t vga_render_control;
+	uint32_t rom_cntl;
+	uint32_t general_pwrmgt;
+	uint32_t low_vid_lower_gpio_cntl;
+	uint32_t medium_vid_lower_gpio_cntl;
+	uint32_t high_vid_lower_gpio_cntl;
+	uint32_t ctxsw_vid_lower_gpio_cntl;
+	uint32_t lower_gpio_enable;
+	bool r;
+
+	viph_control = RREG32(RADEON_VIPH_CONTROL);
+	bus_cntl = RREG32(RADEON_BUS_CNTL);
+	d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
+	d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
+	vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
+	rom_cntl = RREG32(R600_ROM_CNTL);
+	general_pwrmgt = RREG32(R600_GENERAL_PWRMGT);
+	low_vid_lower_gpio_cntl = RREG32(R600_LOW_VID_LOWER_GPIO_CNTL);
+	medium_vid_lower_gpio_cntl = RREG32(R600_MEDIUM_VID_LOWER_GPIO_CNTL);
+	high_vid_lower_gpio_cntl = RREG32(R600_HIGH_VID_LOWER_GPIO_CNTL);
+	ctxsw_vid_lower_gpio_cntl = RREG32(R600_CTXSW_VID_LOWER_GPIO_CNTL);
+	lower_gpio_enable = RREG32(R600_LOWER_GPIO_ENABLE);
+
+	/* disable VIP */
+	WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
+	/* enable the rom */
+	WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+	/* Disable VGA mode */
+	WREG32(AVIVO_D1VGA_CONTROL,
+	       (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+		AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+	WREG32(AVIVO_D2VGA_CONTROL,
+	       (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+		AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+	WREG32(AVIVO_VGA_RENDER_CONTROL,
+	       (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK));
+
+	WREG32(R600_ROM_CNTL,
+	       ((rom_cntl & ~R600_SCK_PRESCALE_CRYSTAL_CLK_MASK) |
+		(1 << R600_SCK_PRESCALE_CRYSTAL_CLK_SHIFT) |
+		R600_SCK_OVERWRITE));
+
+	WREG32(R600_GENERAL_PWRMGT, (general_pwrmgt & ~R600_OPEN_DRAIN_PADS));
+	WREG32(R600_LOW_VID_LOWER_GPIO_CNTL,
+	       (low_vid_lower_gpio_cntl & ~0x400));
+	WREG32(R600_MEDIUM_VID_LOWER_GPIO_CNTL,
+	       (medium_vid_lower_gpio_cntl & ~0x400));
+	WREG32(R600_HIGH_VID_LOWER_GPIO_CNTL,
+	       (high_vid_lower_gpio_cntl & ~0x400));
+	WREG32(R600_CTXSW_VID_LOWER_GPIO_CNTL,
+	       (ctxsw_vid_lower_gpio_cntl & ~0x400));
+	WREG32(R600_LOWER_GPIO_ENABLE, (lower_gpio_enable | 0x400));
+
+	r = radeon_read_bios(rdev);
+
+	/* restore regs */
+	WREG32(RADEON_VIPH_CONTROL, viph_control);
+	WREG32(RADEON_BUS_CNTL, bus_cntl);
+	WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
+	WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
+	WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
+	WREG32(R600_ROM_CNTL, rom_cntl);
+	WREG32(R600_GENERAL_PWRMGT, general_pwrmgt);
+	WREG32(R600_LOW_VID_LOWER_GPIO_CNTL, low_vid_lower_gpio_cntl);
+	WREG32(R600_MEDIUM_VID_LOWER_GPIO_CNTL, medium_vid_lower_gpio_cntl);
+	WREG32(R600_HIGH_VID_LOWER_GPIO_CNTL, high_vid_lower_gpio_cntl);
+	WREG32(R600_CTXSW_VID_LOWER_GPIO_CNTL, ctxsw_vid_lower_gpio_cntl);
+	WREG32(R600_LOWER_GPIO_ENABLE, lower_gpio_enable);
+	return r;
+}
+
+static bool avivo_read_disabled_bios(struct radeon_device *rdev)
+{
+	uint32_t seprom_cntl1;
+	uint32_t viph_control;
+	uint32_t bus_cntl;
+	uint32_t d1vga_control;
+	uint32_t d2vga_control;
+	uint32_t vga_render_control;
+	uint32_t gpiopad_a;
+	uint32_t gpiopad_en;
+	uint32_t gpiopad_mask;
+	bool r;
+
+	seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1);
+	viph_control = RREG32(RADEON_VIPH_CONTROL);
+	bus_cntl = RREG32(RADEON_BUS_CNTL);
+	d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
+	d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
+	vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
+	gpiopad_a = RREG32(RADEON_GPIOPAD_A);
+	gpiopad_en = RREG32(RADEON_GPIOPAD_EN);
+	gpiopad_mask = RREG32(RADEON_GPIOPAD_MASK);
+
+	WREG32(RADEON_SEPROM_CNTL1,
+	       ((seprom_cntl1 & ~RADEON_SCK_PRESCALE_MASK) |
+		(0xc << RADEON_SCK_PRESCALE_SHIFT)));
+	WREG32(RADEON_GPIOPAD_A, 0);
+	WREG32(RADEON_GPIOPAD_EN, 0);
+	WREG32(RADEON_GPIOPAD_MASK, 0);
+
+	/* disable VIP */
+	WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
+
+	/* enable the rom */
+	WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+
+	/* Disable VGA mode */
+	WREG32(AVIVO_D1VGA_CONTROL,
+	       (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+		AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+	WREG32(AVIVO_D2VGA_CONTROL,
+	       (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+		AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+	WREG32(AVIVO_VGA_RENDER_CONTROL,
+	       (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK));
+
+	r = radeon_read_bios(rdev);
+
+	/* restore regs */
+	WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1);
+	WREG32(RADEON_VIPH_CONTROL, viph_control);
+	WREG32(RADEON_BUS_CNTL, bus_cntl);
+	WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
+	WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
+	WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
+	WREG32(RADEON_GPIOPAD_A, gpiopad_a);
+	WREG32(RADEON_GPIOPAD_EN, gpiopad_en);
+	WREG32(RADEON_GPIOPAD_MASK, gpiopad_mask);
+	return r;
+}
+
+static bool legacy_read_disabled_bios(struct radeon_device *rdev)
+{
+	uint32_t seprom_cntl1;
+	uint32_t viph_control;
+	uint32_t bus_cntl;
+	uint32_t crtc_gen_cntl;
+	uint32_t crtc2_gen_cntl;
+	uint32_t crtc_ext_cntl;
+	uint32_t fp2_gen_cntl;
+	bool r;
+
+	seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1);
+	viph_control = RREG32(RADEON_VIPH_CONTROL);
+	bus_cntl = RREG32(RADEON_BUS_CNTL);
+	crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL);
+	crtc2_gen_cntl = 0;
+	crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
+	fp2_gen_cntl = 0;
+
+	if (rdev->ddev->pci_device == PCI_DEVICE_ID_ATI_RADEON_QY) {
+		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+	}
+
+	if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
+		crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+	}
+
+	WREG32(RADEON_SEPROM_CNTL1,
+	       ((seprom_cntl1 & ~RADEON_SCK_PRESCALE_MASK) |
+		(0xc << RADEON_SCK_PRESCALE_SHIFT)));
+
+	/* disable VIP */
+	WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
+
+	/* enable the rom */
+	WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+
+	/* Turn off mem requests and CRTC for both controllers */
+	WREG32(RADEON_CRTC_GEN_CNTL,
+	       ((crtc_gen_cntl & ~RADEON_CRTC_EN) |
+		(RADEON_CRTC_DISP_REQ_EN_B |
+		 RADEON_CRTC_EXT_DISP_EN)));
+	if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
+		WREG32(RADEON_CRTC2_GEN_CNTL,
+		       ((crtc2_gen_cntl & ~RADEON_CRTC2_EN) |
+			RADEON_CRTC2_DISP_REQ_EN_B));
+	}
+	/* Turn off CRTC */
+	WREG32(RADEON_CRTC_EXT_CNTL,
+	       ((crtc_ext_cntl & ~RADEON_CRTC_CRT_ON) |
+		(RADEON_CRTC_SYNC_TRISTAT |
+		 RADEON_CRTC_DISPLAY_DIS)));
+
+	if (rdev->ddev->pci_device == PCI_DEVICE_ID_ATI_RADEON_QY) {
+		WREG32(RADEON_FP2_GEN_CNTL, (fp2_gen_cntl & ~RADEON_FP2_ON));
+	}
+
+	r = radeon_read_bios(rdev);
+
+	/* restore regs */
+	WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1);
+	WREG32(RADEON_VIPH_CONTROL, viph_control);
+	WREG32(RADEON_BUS_CNTL, bus_cntl);
+	WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl);
+	if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
+		WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+	}
+	WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
+	if (rdev->ddev->pci_device == PCI_DEVICE_ID_ATI_RADEON_QY) {
+		WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
+	}
+	return r;
+}
+
+static bool radeon_read_disabled_bios(struct radeon_device *rdev)
+{
+	if (rdev->family >= CHIP_RV770)
+		return r700_read_disabled_bios(rdev);
+	else if (rdev->family >= CHIP_R600)
+		return r600_read_disabled_bios(rdev);
+	else if (rdev->family >= CHIP_RS600)
+		return avivo_read_disabled_bios(rdev);
+	else
+		return legacy_read_disabled_bios(rdev);
+}
+
+bool radeon_get_bios(struct radeon_device *rdev)
+{
+	bool r;
+	uint16_t tmp;
+
+	r = radeon_read_bios(rdev);
+	if (r == false) {
+		r = radeon_read_disabled_bios(rdev);
+	}
+	if (r == false || rdev->bios == NULL) {
+		DRM_ERROR("Unable to locate a BIOS ROM\n");
+		rdev->bios = NULL;
+		return false;
+	}
+	if (rdev->bios[0] != 0x55 || rdev->bios[1] != 0xaa) {
+		goto free_bios;
+	}
+
+	rdev->bios_header_start = RBIOS16(0x48);
+	if (!rdev->bios_header_start) {
+		goto free_bios;
+	}
+	tmp = rdev->bios_header_start + 4;
+	if (!memcmp(rdev->bios + tmp, "ATOM", 4) ||
+	    !memcmp(rdev->bios + tmp, "MOTA", 4)) {
+		rdev->is_atom_bios = true;
+	} else {
+		rdev->is_atom_bios = false;
+	}
+
+	DRM_DEBUG("%sBIOS detected\n", rdev->is_atom_bios ? "ATOM" : "COM");
+	return true;
+free_bios:
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+	return false;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c
new file mode 100644
index 00000000000..a37cbce5318
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_clocks.c
@@ -0,0 +1,833 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+#include "atom.h"
+
+/* 10 khz */
+static uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev)
+{
+	struct radeon_pll *spll = &rdev->clock.spll;
+	uint32_t fb_div, ref_div, post_div, sclk;
+
+	fb_div = RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV);
+	fb_div = (fb_div >> RADEON_SPLL_FB_DIV_SHIFT) & RADEON_SPLL_FB_DIV_MASK;
+	fb_div <<= 1;
+	fb_div *= spll->reference_freq;
+
+	ref_div =
+	    RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV) & RADEON_M_SPLL_REF_DIV_MASK;
+	sclk = fb_div / ref_div;
+
+	post_div = RREG32_PLL(RADEON_SCLK_CNTL) & RADEON_SCLK_SRC_SEL_MASK;
+	if (post_div == 2)
+		sclk >>= 1;
+	else if (post_div == 3)
+		sclk >>= 2;
+	else if (post_div == 4)
+		sclk >>= 4;
+
+	return sclk;
+}
+
+/* 10 khz */
+static uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev)
+{
+	struct radeon_pll *mpll = &rdev->clock.mpll;
+	uint32_t fb_div, ref_div, post_div, mclk;
+
+	fb_div = RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV);
+	fb_div = (fb_div >> RADEON_MPLL_FB_DIV_SHIFT) & RADEON_MPLL_FB_DIV_MASK;
+	fb_div <<= 1;
+	fb_div *= mpll->reference_freq;
+
+	ref_div =
+	    RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV) & RADEON_M_SPLL_REF_DIV_MASK;
+	mclk = fb_div / ref_div;
+
+	post_div = RREG32_PLL(RADEON_MCLK_CNTL) & 0x7;
+	if (post_div == 2)
+		mclk >>= 1;
+	else if (post_div == 3)
+		mclk >>= 2;
+	else if (post_div == 4)
+		mclk >>= 4;
+
+	return mclk;
+}
+
+void radeon_get_clock_info(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_pll *p1pll = &rdev->clock.p1pll;
+	struct radeon_pll *p2pll = &rdev->clock.p2pll;
+	struct radeon_pll *spll = &rdev->clock.spll;
+	struct radeon_pll *mpll = &rdev->clock.mpll;
+	int ret;
+
+	if (rdev->is_atom_bios)
+		ret = radeon_atom_get_clock_info(dev);
+	else
+		ret = radeon_combios_get_clock_info(dev);
+
+	if (ret) {
+		if (p1pll->reference_div < 2)
+			p1pll->reference_div = 12;
+		if (p2pll->reference_div < 2)
+			p2pll->reference_div = 12;
+		if (spll->reference_div < 2)
+			spll->reference_div =
+			    RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV) &
+			    RADEON_M_SPLL_REF_DIV_MASK;
+		if (mpll->reference_div < 2)
+			mpll->reference_div = spll->reference_div;
+	} else {
+		if (ASIC_IS_AVIVO(rdev)) {
+			/* TODO FALLBACK */
+		} else {
+			DRM_INFO("Using generic clock info\n");
+
+			if (rdev->flags & RADEON_IS_IGP) {
+				p1pll->reference_freq = 1432;
+				p2pll->reference_freq = 1432;
+				spll->reference_freq = 1432;
+				mpll->reference_freq = 1432;
+			} else {
+				p1pll->reference_freq = 2700;
+				p2pll->reference_freq = 2700;
+				spll->reference_freq = 2700;
+				mpll->reference_freq = 2700;
+			}
+			p1pll->reference_div =
+			    RREG32_PLL(RADEON_PPLL_REF_DIV) & 0x3ff;
+			if (p1pll->reference_div < 2)
+				p1pll->reference_div = 12;
+			p2pll->reference_div = p1pll->reference_div;
+
+			if (rdev->family >= CHIP_R420) {
+				p1pll->pll_in_min = 100;
+				p1pll->pll_in_max = 1350;
+				p1pll->pll_out_min = 20000;
+				p1pll->pll_out_max = 50000;
+				p2pll->pll_in_min = 100;
+				p2pll->pll_in_max = 1350;
+				p2pll->pll_out_min = 20000;
+				p2pll->pll_out_max = 50000;
+			} else {
+				p1pll->pll_in_min = 40;
+				p1pll->pll_in_max = 500;
+				p1pll->pll_out_min = 12500;
+				p1pll->pll_out_max = 35000;
+				p2pll->pll_in_min = 40;
+				p2pll->pll_in_max = 500;
+				p2pll->pll_out_min = 12500;
+				p2pll->pll_out_max = 35000;
+			}
+
+			spll->reference_div =
+			    RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV) &
+			    RADEON_M_SPLL_REF_DIV_MASK;
+			mpll->reference_div = spll->reference_div;
+			rdev->clock.default_sclk =
+			    radeon_legacy_get_engine_clock(rdev);
+			rdev->clock.default_mclk =
+			    radeon_legacy_get_memory_clock(rdev);
+		}
+	}
+
+	/* pixel clocks */
+	if (ASIC_IS_AVIVO(rdev)) {
+		p1pll->min_post_div = 2;
+		p1pll->max_post_div = 0x7f;
+		p1pll->min_frac_feedback_div = 0;
+		p1pll->max_frac_feedback_div = 9;
+		p2pll->min_post_div = 2;
+		p2pll->max_post_div = 0x7f;
+		p2pll->min_frac_feedback_div = 0;
+		p2pll->max_frac_feedback_div = 9;
+	} else {
+		p1pll->min_post_div = 1;
+		p1pll->max_post_div = 16;
+		p1pll->min_frac_feedback_div = 0;
+		p1pll->max_frac_feedback_div = 0;
+		p2pll->min_post_div = 1;
+		p2pll->max_post_div = 12;
+		p2pll->min_frac_feedback_div = 0;
+		p2pll->max_frac_feedback_div = 0;
+	}
+
+	p1pll->min_ref_div = 2;
+	p1pll->max_ref_div = 0x3ff;
+	p1pll->min_feedback_div = 4;
+	p1pll->max_feedback_div = 0x7ff;
+	p1pll->best_vco = 0;
+
+	p2pll->min_ref_div = 2;
+	p2pll->max_ref_div = 0x3ff;
+	p2pll->min_feedback_div = 4;
+	p2pll->max_feedback_div = 0x7ff;
+	p2pll->best_vco = 0;
+
+	/* system clock */
+	spll->min_post_div = 1;
+	spll->max_post_div = 1;
+	spll->min_ref_div = 2;
+	spll->max_ref_div = 0xff;
+	spll->min_feedback_div = 4;
+	spll->max_feedback_div = 0xff;
+	spll->best_vco = 0;
+
+	/* memory clock */
+	mpll->min_post_div = 1;
+	mpll->max_post_div = 1;
+	mpll->min_ref_div = 2;
+	mpll->max_ref_div = 0xff;
+	mpll->min_feedback_div = 4;
+	mpll->max_feedback_div = 0xff;
+	mpll->best_vco = 0;
+
+}
+
+/* 10 khz */
+static uint32_t calc_eng_mem_clock(struct radeon_device *rdev,
+				   uint32_t req_clock,
+				   int *fb_div, int *post_div)
+{
+	struct radeon_pll *spll = &rdev->clock.spll;
+	int ref_div = spll->reference_div;
+
+	if (!ref_div)
+		ref_div =
+		    RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV) &
+		    RADEON_M_SPLL_REF_DIV_MASK;
+
+	if (req_clock < 15000) {
+		*post_div = 8;
+		req_clock *= 8;
+	} else if (req_clock < 30000) {
+		*post_div = 4;
+		req_clock *= 4;
+	} else if (req_clock < 60000) {
+		*post_div = 2;
+		req_clock *= 2;
+	} else
+		*post_div = 1;
+
+	req_clock *= ref_div;
+	req_clock += spll->reference_freq;
+	req_clock /= (2 * spll->reference_freq);
+
+	*fb_div = req_clock & 0xff;
+
+	req_clock = (req_clock & 0xffff) << 1;
+	req_clock *= spll->reference_freq;
+	req_clock /= ref_div;
+	req_clock /= *post_div;
+
+	return req_clock;
+}
+
+/* 10 khz */
+void radeon_legacy_set_engine_clock(struct radeon_device *rdev,
+				    uint32_t eng_clock)
+{
+	uint32_t tmp;
+	int fb_div, post_div;
+
+	/* XXX: wait for idle */
+
+	eng_clock = calc_eng_mem_clock(rdev, eng_clock, &fb_div, &post_div);
+
+	tmp = RREG32_PLL(RADEON_CLK_PIN_CNTL);
+	tmp &= ~RADEON_DONT_USE_XTALIN;
+	WREG32_PLL(RADEON_CLK_PIN_CNTL, tmp);
+
+	tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+	tmp &= ~RADEON_SCLK_SRC_SEL_MASK;
+	WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+
+	udelay(10);
+
+	tmp = RREG32_PLL(RADEON_SPLL_CNTL);
+	tmp |= RADEON_SPLL_SLEEP;
+	WREG32_PLL(RADEON_SPLL_CNTL, tmp);
+
+	udelay(2);
+
+	tmp = RREG32_PLL(RADEON_SPLL_CNTL);
+	tmp |= RADEON_SPLL_RESET;
+	WREG32_PLL(RADEON_SPLL_CNTL, tmp);
+
+	udelay(200);
+
+	tmp = RREG32_PLL(RADEON_M_SPLL_REF_FB_DIV);
+	tmp &= ~(RADEON_SPLL_FB_DIV_MASK << RADEON_SPLL_FB_DIV_SHIFT);
+	tmp |= (fb_div & RADEON_SPLL_FB_DIV_MASK) << RADEON_SPLL_FB_DIV_SHIFT;
+	WREG32_PLL(RADEON_M_SPLL_REF_FB_DIV, tmp);
+
+	/* XXX: verify on different asics */
+	tmp = RREG32_PLL(RADEON_SPLL_CNTL);
+	tmp &= ~RADEON_SPLL_PVG_MASK;
+	if ((eng_clock * post_div) >= 90000)
+		tmp |= (0x7 << RADEON_SPLL_PVG_SHIFT);
+	else
+		tmp |= (0x4 << RADEON_SPLL_PVG_SHIFT);
+	WREG32_PLL(RADEON_SPLL_CNTL, tmp);
+
+	tmp = RREG32_PLL(RADEON_SPLL_CNTL);
+	tmp &= ~RADEON_SPLL_SLEEP;
+	WREG32_PLL(RADEON_SPLL_CNTL, tmp);
+
+	udelay(2);
+
+	tmp = RREG32_PLL(RADEON_SPLL_CNTL);
+	tmp &= ~RADEON_SPLL_RESET;
+	WREG32_PLL(RADEON_SPLL_CNTL, tmp);
+
+	udelay(200);
+
+	tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+	tmp &= ~RADEON_SCLK_SRC_SEL_MASK;
+	switch (post_div) {
+	case 1:
+	default:
+		tmp |= 1;
+		break;
+	case 2:
+		tmp |= 2;
+		break;
+	case 4:
+		tmp |= 3;
+		break;
+	case 8:
+		tmp |= 4;
+		break;
+	}
+	WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+
+	udelay(20);
+
+	tmp = RREG32_PLL(RADEON_CLK_PIN_CNTL);
+	tmp |= RADEON_DONT_USE_XTALIN;
+	WREG32_PLL(RADEON_CLK_PIN_CNTL, tmp);
+
+	udelay(10);
+}
+
+void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable)
+{
+	uint32_t tmp;
+
+	if (enable) {
+		if (rdev->flags & RADEON_SINGLE_CRTC) {
+			tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+			if ((RREG32(RADEON_CONFIG_CNTL) &
+			     RADEON_CFG_ATI_REV_ID_MASK) >
+			    RADEON_CFG_ATI_REV_A13) {
+				tmp &=
+				    ~(RADEON_SCLK_FORCE_CP |
+				      RADEON_SCLK_FORCE_RB);
+			}
+			tmp &=
+			    ~(RADEON_SCLK_FORCE_HDP | RADEON_SCLK_FORCE_DISP1 |
+			      RADEON_SCLK_FORCE_TOP | RADEON_SCLK_FORCE_SE |
+			      RADEON_SCLK_FORCE_IDCT | RADEON_SCLK_FORCE_RE |
+			      RADEON_SCLK_FORCE_PB | RADEON_SCLK_FORCE_TAM |
+			      RADEON_SCLK_FORCE_TDM);
+			WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+		} else if (ASIC_IS_R300(rdev)) {
+			if ((rdev->family == CHIP_RS400) ||
+			    (rdev->family == CHIP_RS480)) {
+				tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+				tmp &=
+				    ~(RADEON_SCLK_FORCE_DISP2 |
+				      RADEON_SCLK_FORCE_CP |
+				      RADEON_SCLK_FORCE_HDP |
+				      RADEON_SCLK_FORCE_DISP1 |
+				      RADEON_SCLK_FORCE_TOP |
+				      RADEON_SCLK_FORCE_E2 | R300_SCLK_FORCE_VAP
+				      | RADEON_SCLK_FORCE_IDCT |
+				      RADEON_SCLK_FORCE_VIP | R300_SCLK_FORCE_SR
+				      | R300_SCLK_FORCE_PX | R300_SCLK_FORCE_TX
+				      | R300_SCLK_FORCE_US |
+				      RADEON_SCLK_FORCE_TV_SCLK |
+				      R300_SCLK_FORCE_SU |
+				      RADEON_SCLK_FORCE_OV0);
+				tmp |= RADEON_DYN_STOP_LAT_MASK;
+				tmp |=
+				    RADEON_SCLK_FORCE_TOP |
+				    RADEON_SCLK_FORCE_VIP;
+				WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+
+				tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL);
+				tmp &= ~RADEON_SCLK_MORE_FORCEON;
+				tmp |= RADEON_SCLK_MORE_MAX_DYN_STOP_LAT;
+				WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp);
+
+				tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
+				tmp |= (RADEON_PIXCLK_ALWAYS_ONb |
+					RADEON_PIXCLK_DAC_ALWAYS_ONb);
+				WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp);
+
+				tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL);
+				tmp |= (RADEON_PIX2CLK_ALWAYS_ONb |
+					RADEON_PIX2CLK_DAC_ALWAYS_ONb |
+					RADEON_DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb |
+					R300_DVOCLK_ALWAYS_ONb |
+					RADEON_PIXCLK_BLEND_ALWAYS_ONb |
+					RADEON_PIXCLK_GV_ALWAYS_ONb |
+					R300_PIXCLK_DVO_ALWAYS_ONb |
+					RADEON_PIXCLK_LVDS_ALWAYS_ONb |
+					RADEON_PIXCLK_TMDS_ALWAYS_ONb |
+					R300_PIXCLK_TRANS_ALWAYS_ONb |
+					R300_PIXCLK_TVO_ALWAYS_ONb |
+					R300_P2G2CLK_ALWAYS_ONb |
+					R300_P2G2CLK_ALWAYS_ONb);
+				WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
+			} else if (rdev->family >= CHIP_RV350) {
+				tmp = RREG32_PLL(R300_SCLK_CNTL2);
+				tmp &= ~(R300_SCLK_FORCE_TCL |
+					 R300_SCLK_FORCE_GA |
+					 R300_SCLK_FORCE_CBA);
+				tmp |= (R300_SCLK_TCL_MAX_DYN_STOP_LAT |
+					R300_SCLK_GA_MAX_DYN_STOP_LAT |
+					R300_SCLK_CBA_MAX_DYN_STOP_LAT);
+				WREG32_PLL(R300_SCLK_CNTL2, tmp);
+
+				tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+				tmp &=
+				    ~(RADEON_SCLK_FORCE_DISP2 |
+				      RADEON_SCLK_FORCE_CP |
+				      RADEON_SCLK_FORCE_HDP |
+				      RADEON_SCLK_FORCE_DISP1 |
+				      RADEON_SCLK_FORCE_TOP |
+				      RADEON_SCLK_FORCE_E2 | R300_SCLK_FORCE_VAP
+				      | RADEON_SCLK_FORCE_IDCT |
+				      RADEON_SCLK_FORCE_VIP | R300_SCLK_FORCE_SR
+				      | R300_SCLK_FORCE_PX | R300_SCLK_FORCE_TX
+				      | R300_SCLK_FORCE_US |
+				      RADEON_SCLK_FORCE_TV_SCLK |
+				      R300_SCLK_FORCE_SU |
+				      RADEON_SCLK_FORCE_OV0);
+				tmp |= RADEON_DYN_STOP_LAT_MASK;
+				WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+
+				tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL);
+				tmp &= ~RADEON_SCLK_MORE_FORCEON;
+				tmp |= RADEON_SCLK_MORE_MAX_DYN_STOP_LAT;
+				WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp);
+
+				tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
+				tmp |= (RADEON_PIXCLK_ALWAYS_ONb |
+					RADEON_PIXCLK_DAC_ALWAYS_ONb);
+				WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp);
+
+				tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL);
+				tmp |= (RADEON_PIX2CLK_ALWAYS_ONb |
+					RADEON_PIX2CLK_DAC_ALWAYS_ONb |
+					RADEON_DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb |
+					R300_DVOCLK_ALWAYS_ONb |
+					RADEON_PIXCLK_BLEND_ALWAYS_ONb |
+					RADEON_PIXCLK_GV_ALWAYS_ONb |
+					R300_PIXCLK_DVO_ALWAYS_ONb |
+					RADEON_PIXCLK_LVDS_ALWAYS_ONb |
+					RADEON_PIXCLK_TMDS_ALWAYS_ONb |
+					R300_PIXCLK_TRANS_ALWAYS_ONb |
+					R300_PIXCLK_TVO_ALWAYS_ONb |
+					R300_P2G2CLK_ALWAYS_ONb |
+					R300_P2G2CLK_ALWAYS_ONb);
+				WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
+
+				tmp = RREG32_PLL(RADEON_MCLK_MISC);
+				tmp |= (RADEON_MC_MCLK_DYN_ENABLE |
+					RADEON_IO_MCLK_DYN_ENABLE);
+				WREG32_PLL(RADEON_MCLK_MISC, tmp);
+
+				tmp = RREG32_PLL(RADEON_MCLK_CNTL);
+				tmp |= (RADEON_FORCEON_MCLKA |
+					RADEON_FORCEON_MCLKB);
+
+				tmp &= ~(RADEON_FORCEON_YCLKA |
+					 RADEON_FORCEON_YCLKB |
+					 RADEON_FORCEON_MC);
+
+				/* Some releases of vbios have set DISABLE_MC_MCLKA
+				   and DISABLE_MC_MCLKB bits in the vbios table.  Setting these
+				   bits will cause H/W hang when reading video memory with dynamic clocking
+				   enabled. */
+				if ((tmp & R300_DISABLE_MC_MCLKA) &&
+				    (tmp & R300_DISABLE_MC_MCLKB)) {
+					/* If both bits are set, then check the active channels */
+					tmp = RREG32_PLL(RADEON_MCLK_CNTL);
+					if (rdev->mc.vram_width == 64) {
+						if (RREG32(RADEON_MEM_CNTL) &
+						    R300_MEM_USE_CD_CH_ONLY)
+							tmp &=
+							    ~R300_DISABLE_MC_MCLKB;
+						else
+							tmp &=
+							    ~R300_DISABLE_MC_MCLKA;
+					} else {
+						tmp &= ~(R300_DISABLE_MC_MCLKA |
+							 R300_DISABLE_MC_MCLKB);
+					}
+				}
+
+				WREG32_PLL(RADEON_MCLK_CNTL, tmp);
+			} else {
+				tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+				tmp &= ~(R300_SCLK_FORCE_VAP);
+				tmp |= RADEON_SCLK_FORCE_CP;
+				WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+				udelay(15000);
+
+				tmp = RREG32_PLL(R300_SCLK_CNTL2);
+				tmp &= ~(R300_SCLK_FORCE_TCL |
+					 R300_SCLK_FORCE_GA |
+					 R300_SCLK_FORCE_CBA);
+				WREG32_PLL(R300_SCLK_CNTL2, tmp);
+			}
+		} else {
+			tmp = RREG32_PLL(RADEON_CLK_PWRMGT_CNTL);
+
+			tmp &= ~(RADEON_ACTIVE_HILO_LAT_MASK |
+				 RADEON_DISP_DYN_STOP_LAT_MASK |
+				 RADEON_DYN_STOP_MODE_MASK);
+
+			tmp |= (RADEON_ENGIN_DYNCLK_MODE |
+				(0x01 << RADEON_ACTIVE_HILO_LAT_SHIFT));
+			WREG32_PLL(RADEON_CLK_PWRMGT_CNTL, tmp);
+			udelay(15000);
+
+			tmp = RREG32_PLL(RADEON_CLK_PIN_CNTL);
+			tmp |= RADEON_SCLK_DYN_START_CNTL;
+			WREG32_PLL(RADEON_CLK_PIN_CNTL, tmp);
+			udelay(15000);
+
+			/* When DRI is enabled, setting DYN_STOP_LAT to zero can cause some R200
+			   to lockup randomly, leave them as set by BIOS.
+			 */
+			tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+			/*tmp &= RADEON_SCLK_SRC_SEL_MASK; */
+			tmp &= ~RADEON_SCLK_FORCEON_MASK;
+
+			/*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300 */
+			if (((rdev->family == CHIP_RV250) &&
+			     ((RREG32(RADEON_CONFIG_CNTL) &
+			       RADEON_CFG_ATI_REV_ID_MASK) <
+			      RADEON_CFG_ATI_REV_A13))
+			    || ((rdev->family == CHIP_RV100)
+				&&
+				((RREG32(RADEON_CONFIG_CNTL) &
+				  RADEON_CFG_ATI_REV_ID_MASK) <=
+				 RADEON_CFG_ATI_REV_A13))) {
+				tmp |= RADEON_SCLK_FORCE_CP;
+				tmp |= RADEON_SCLK_FORCE_VIP;
+			}
+
+			WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+
+			if ((rdev->family == CHIP_RV200) ||
+			    (rdev->family == CHIP_RV250) ||
+			    (rdev->family == CHIP_RV280)) {
+				tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL);
+				tmp &= ~RADEON_SCLK_MORE_FORCEON;
+
+				/* RV200::A11 A12 RV250::A11 A12 */
+				if (((rdev->family == CHIP_RV200) ||
+				     (rdev->family == CHIP_RV250)) &&
+				    ((RREG32(RADEON_CONFIG_CNTL) &
+				      RADEON_CFG_ATI_REV_ID_MASK) <
+				     RADEON_CFG_ATI_REV_A13)) {
+					tmp |= RADEON_SCLK_MORE_FORCEON;
+				}
+				WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp);
+				udelay(15000);
+			}
+
+			/* RV200::A11 A12, RV250::A11 A12 */
+			if (((rdev->family == CHIP_RV200) ||
+			     (rdev->family == CHIP_RV250)) &&
+			    ((RREG32(RADEON_CONFIG_CNTL) &
+			      RADEON_CFG_ATI_REV_ID_MASK) <
+			     RADEON_CFG_ATI_REV_A13)) {
+				tmp = RREG32_PLL(RADEON_PLL_PWRMGT_CNTL);
+				tmp |= RADEON_TCL_BYPASS_DISABLE;
+				WREG32_PLL(RADEON_PLL_PWRMGT_CNTL, tmp);
+			}
+			udelay(15000);
+
+			/*enable dynamic mode for display clocks (PIXCLK and PIX2CLK) */
+			tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL);
+			tmp |= (RADEON_PIX2CLK_ALWAYS_ONb |
+				RADEON_PIX2CLK_DAC_ALWAYS_ONb |
+				RADEON_PIXCLK_BLEND_ALWAYS_ONb |
+				RADEON_PIXCLK_GV_ALWAYS_ONb |
+				RADEON_PIXCLK_DIG_TMDS_ALWAYS_ONb |
+				RADEON_PIXCLK_LVDS_ALWAYS_ONb |
+				RADEON_PIXCLK_TMDS_ALWAYS_ONb);
+
+			WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
+			udelay(15000);
+
+			tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
+			tmp |= (RADEON_PIXCLK_ALWAYS_ONb |
+				RADEON_PIXCLK_DAC_ALWAYS_ONb);
+
+			WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp);
+			udelay(15000);
+		}
+	} else {
+		/* Turn everything OFF (ForceON to everything) */
+		if (rdev->flags & RADEON_SINGLE_CRTC) {
+			tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+			tmp |= (RADEON_SCLK_FORCE_CP | RADEON_SCLK_FORCE_HDP |
+				RADEON_SCLK_FORCE_DISP1 | RADEON_SCLK_FORCE_TOP
+				| RADEON_SCLK_FORCE_E2 | RADEON_SCLK_FORCE_SE |
+				RADEON_SCLK_FORCE_IDCT | RADEON_SCLK_FORCE_VIP |
+				RADEON_SCLK_FORCE_RE | RADEON_SCLK_FORCE_PB |
+				RADEON_SCLK_FORCE_TAM | RADEON_SCLK_FORCE_TDM |
+				RADEON_SCLK_FORCE_RB);
+			WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+		} else if ((rdev->family == CHIP_RS400) ||
+			   (rdev->family == CHIP_RS480)) {
+			tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+			tmp |= (RADEON_SCLK_FORCE_DISP2 | RADEON_SCLK_FORCE_CP |
+				RADEON_SCLK_FORCE_HDP | RADEON_SCLK_FORCE_DISP1
+				| RADEON_SCLK_FORCE_TOP | RADEON_SCLK_FORCE_E2 |
+				R300_SCLK_FORCE_VAP | RADEON_SCLK_FORCE_IDCT |
+				RADEON_SCLK_FORCE_VIP | R300_SCLK_FORCE_SR |
+				R300_SCLK_FORCE_PX | R300_SCLK_FORCE_TX |
+				R300_SCLK_FORCE_US | RADEON_SCLK_FORCE_TV_SCLK |
+				R300_SCLK_FORCE_SU | RADEON_SCLK_FORCE_OV0);
+			WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+
+			tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL);
+			tmp |= RADEON_SCLK_MORE_FORCEON;
+			WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp);
+
+			tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
+			tmp &= ~(RADEON_PIXCLK_ALWAYS_ONb |
+				 RADEON_PIXCLK_DAC_ALWAYS_ONb |
+				 R300_DISP_DAC_PIXCLK_DAC_BLANK_OFF);
+			WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp);
+
+			tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL);
+			tmp &= ~(RADEON_PIX2CLK_ALWAYS_ONb |
+				 RADEON_PIX2CLK_DAC_ALWAYS_ONb |
+				 RADEON_DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb |
+				 R300_DVOCLK_ALWAYS_ONb |
+				 RADEON_PIXCLK_BLEND_ALWAYS_ONb |
+				 RADEON_PIXCLK_GV_ALWAYS_ONb |
+				 R300_PIXCLK_DVO_ALWAYS_ONb |
+				 RADEON_PIXCLK_LVDS_ALWAYS_ONb |
+				 RADEON_PIXCLK_TMDS_ALWAYS_ONb |
+				 R300_PIXCLK_TRANS_ALWAYS_ONb |
+				 R300_PIXCLK_TVO_ALWAYS_ONb |
+				 R300_P2G2CLK_ALWAYS_ONb |
+				 R300_P2G2CLK_ALWAYS_ONb |
+				 R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
+			WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
+		} else if (rdev->family >= CHIP_RV350) {
+			/* for RV350/M10, no delays are required. */
+			tmp = RREG32_PLL(R300_SCLK_CNTL2);
+			tmp |= (R300_SCLK_FORCE_TCL |
+				R300_SCLK_FORCE_GA | R300_SCLK_FORCE_CBA);
+			WREG32_PLL(R300_SCLK_CNTL2, tmp);
+
+			tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+			tmp |= (RADEON_SCLK_FORCE_DISP2 | RADEON_SCLK_FORCE_CP |
+				RADEON_SCLK_FORCE_HDP | RADEON_SCLK_FORCE_DISP1
+				| RADEON_SCLK_FORCE_TOP | RADEON_SCLK_FORCE_E2 |
+				R300_SCLK_FORCE_VAP | RADEON_SCLK_FORCE_IDCT |
+				RADEON_SCLK_FORCE_VIP | R300_SCLK_FORCE_SR |
+				R300_SCLK_FORCE_PX | R300_SCLK_FORCE_TX |
+				R300_SCLK_FORCE_US | RADEON_SCLK_FORCE_TV_SCLK |
+				R300_SCLK_FORCE_SU | RADEON_SCLK_FORCE_OV0);
+			WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+
+			tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL);
+			tmp |= RADEON_SCLK_MORE_FORCEON;
+			WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp);
+
+			tmp = RREG32_PLL(RADEON_MCLK_CNTL);
+			tmp |= (RADEON_FORCEON_MCLKA |
+				RADEON_FORCEON_MCLKB |
+				RADEON_FORCEON_YCLKA |
+				RADEON_FORCEON_YCLKB | RADEON_FORCEON_MC);
+			WREG32_PLL(RADEON_MCLK_CNTL, tmp);
+
+			tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
+			tmp &= ~(RADEON_PIXCLK_ALWAYS_ONb |
+				 RADEON_PIXCLK_DAC_ALWAYS_ONb |
+				 R300_DISP_DAC_PIXCLK_DAC_BLANK_OFF);
+			WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp);
+
+			tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL);
+			tmp &= ~(RADEON_PIX2CLK_ALWAYS_ONb |
+				 RADEON_PIX2CLK_DAC_ALWAYS_ONb |
+				 RADEON_DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb |
+				 R300_DVOCLK_ALWAYS_ONb |
+				 RADEON_PIXCLK_BLEND_ALWAYS_ONb |
+				 RADEON_PIXCLK_GV_ALWAYS_ONb |
+				 R300_PIXCLK_DVO_ALWAYS_ONb |
+				 RADEON_PIXCLK_LVDS_ALWAYS_ONb |
+				 RADEON_PIXCLK_TMDS_ALWAYS_ONb |
+				 R300_PIXCLK_TRANS_ALWAYS_ONb |
+				 R300_PIXCLK_TVO_ALWAYS_ONb |
+				 R300_P2G2CLK_ALWAYS_ONb |
+				 R300_P2G2CLK_ALWAYS_ONb |
+				 R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
+			WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
+		} else {
+			tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+			tmp |= (RADEON_SCLK_FORCE_CP | RADEON_SCLK_FORCE_E2);
+			tmp |= RADEON_SCLK_FORCE_SE;
+
+			if (rdev->flags & RADEON_SINGLE_CRTC) {
+				tmp |= (RADEON_SCLK_FORCE_RB |
+					RADEON_SCLK_FORCE_TDM |
+					RADEON_SCLK_FORCE_TAM |
+					RADEON_SCLK_FORCE_PB |
+					RADEON_SCLK_FORCE_RE |
+					RADEON_SCLK_FORCE_VIP |
+					RADEON_SCLK_FORCE_IDCT |
+					RADEON_SCLK_FORCE_TOP |
+					RADEON_SCLK_FORCE_DISP1 |
+					RADEON_SCLK_FORCE_DISP2 |
+					RADEON_SCLK_FORCE_HDP);
+			} else if ((rdev->family == CHIP_R300) ||
+				   (rdev->family == CHIP_R350)) {
+				tmp |= (RADEON_SCLK_FORCE_HDP |
+					RADEON_SCLK_FORCE_DISP1 |
+					RADEON_SCLK_FORCE_DISP2 |
+					RADEON_SCLK_FORCE_TOP |
+					RADEON_SCLK_FORCE_IDCT |
+					RADEON_SCLK_FORCE_VIP);
+			}
+			WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+
+			udelay(16000);
+
+			if ((rdev->family == CHIP_R300) ||
+			    (rdev->family == CHIP_R350)) {
+				tmp = RREG32_PLL(R300_SCLK_CNTL2);
+				tmp |= (R300_SCLK_FORCE_TCL |
+					R300_SCLK_FORCE_GA |
+					R300_SCLK_FORCE_CBA);
+				WREG32_PLL(R300_SCLK_CNTL2, tmp);
+				udelay(16000);
+			}
+
+			if (rdev->flags & RADEON_IS_IGP) {
+				tmp = RREG32_PLL(RADEON_MCLK_CNTL);
+				tmp &= ~(RADEON_FORCEON_MCLKA |
+					 RADEON_FORCEON_YCLKA);
+				WREG32_PLL(RADEON_MCLK_CNTL, tmp);
+				udelay(16000);
+			}
+
+			if ((rdev->family == CHIP_RV200) ||
+			    (rdev->family == CHIP_RV250) ||
+			    (rdev->family == CHIP_RV280)) {
+				tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL);
+				tmp |= RADEON_SCLK_MORE_FORCEON;
+				WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp);
+				udelay(16000);
+			}
+
+			tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL);
+			tmp &= ~(RADEON_PIX2CLK_ALWAYS_ONb |
+				 RADEON_PIX2CLK_DAC_ALWAYS_ONb |
+				 RADEON_PIXCLK_BLEND_ALWAYS_ONb |
+				 RADEON_PIXCLK_GV_ALWAYS_ONb |
+				 RADEON_PIXCLK_DIG_TMDS_ALWAYS_ONb |
+				 RADEON_PIXCLK_LVDS_ALWAYS_ONb |
+				 RADEON_PIXCLK_TMDS_ALWAYS_ONb);
+
+			WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
+			udelay(16000);
+
+			tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
+			tmp &= ~(RADEON_PIXCLK_ALWAYS_ONb |
+				 RADEON_PIXCLK_DAC_ALWAYS_ONb);
+			WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp);
+		}
+	}
+}
+
+static void radeon_apply_clock_quirks(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	/* XXX make sure engine is idle */
+
+	if (rdev->family < CHIP_RS600) {
+		tmp = RREG32_PLL(RADEON_SCLK_CNTL);
+		if (ASIC_IS_R300(rdev) || ASIC_IS_RV100(rdev))
+			tmp |= RADEON_SCLK_FORCE_CP | RADEON_SCLK_FORCE_VIP;
+		if ((rdev->family == CHIP_RV250)
+		    || (rdev->family == CHIP_RV280))
+			tmp |=
+			    RADEON_SCLK_FORCE_DISP1 | RADEON_SCLK_FORCE_DISP2;
+		if ((rdev->family == CHIP_RV350)
+		    || (rdev->family == CHIP_RV380))
+			tmp |= R300_SCLK_FORCE_VAP;
+		if (rdev->family == CHIP_R420)
+			tmp |= R300_SCLK_FORCE_PX | R300_SCLK_FORCE_TX;
+		WREG32_PLL(RADEON_SCLK_CNTL, tmp);
+	} else if (rdev->family < CHIP_R600) {
+		tmp = RREG32_PLL(AVIVO_CP_DYN_CNTL);
+		tmp |= AVIVO_CP_FORCEON;
+		WREG32_PLL(AVIVO_CP_DYN_CNTL, tmp);
+
+		tmp = RREG32_PLL(AVIVO_E2_DYN_CNTL);
+		tmp |= AVIVO_E2_FORCEON;
+		WREG32_PLL(AVIVO_E2_DYN_CNTL, tmp);
+
+		tmp = RREG32_PLL(AVIVO_IDCT_DYN_CNTL);
+		tmp |= AVIVO_IDCT_FORCEON;
+		WREG32_PLL(AVIVO_IDCT_DYN_CNTL, tmp);
+	}
+}
+
+int radeon_static_clocks_init(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	/* XXX make sure engine is idle */
+
+	if (radeon_dynclks != -1) {
+		if (radeon_dynclks)
+			radeon_set_clock_gating(rdev, 1);
+	}
+	radeon_apply_clock_quirks(rdev);
+	return 0;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
new file mode 100644
index 00000000000..06e8038bc4a
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -0,0 +1,2481 @@
+/*
+ * Copyright 2004 ATI Technologies Inc., Markham, Ontario
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+#include "atom.h"
+
+#ifdef CONFIG_PPC_PMAC
+/* not sure which of these are needed */
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#endif /* CONFIG_PPC_PMAC */
+
+/* from radeon_encoder.c */
+extern uint32_t
+radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device,
+		      uint8_t dac);
+extern void radeon_link_encoder_connector(struct drm_device *dev);
+
+/* from radeon_connector.c */
+extern void
+radeon_add_legacy_connector(struct drm_device *dev,
+			    uint32_t connector_id,
+			    uint32_t supported_device,
+			    int connector_type,
+			    struct radeon_i2c_bus_rec *i2c_bus);
+
+/* from radeon_legacy_encoder.c */
+extern void
+radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id,
+			  uint32_t supported_device);
+
+/* old legacy ATI BIOS routines */
+
+/* COMBIOS table offsets */
+enum radeon_combios_table_offset {
+	/* absolute offset tables */
+	COMBIOS_ASIC_INIT_1_TABLE,
+	COMBIOS_BIOS_SUPPORT_TABLE,
+	COMBIOS_DAC_PROGRAMMING_TABLE,
+	COMBIOS_MAX_COLOR_DEPTH_TABLE,
+	COMBIOS_CRTC_INFO_TABLE,
+	COMBIOS_PLL_INFO_TABLE,
+	COMBIOS_TV_INFO_TABLE,
+	COMBIOS_DFP_INFO_TABLE,
+	COMBIOS_HW_CONFIG_INFO_TABLE,
+	COMBIOS_MULTIMEDIA_INFO_TABLE,
+	COMBIOS_TV_STD_PATCH_TABLE,
+	COMBIOS_LCD_INFO_TABLE,
+	COMBIOS_MOBILE_INFO_TABLE,
+	COMBIOS_PLL_INIT_TABLE,
+	COMBIOS_MEM_CONFIG_TABLE,
+	COMBIOS_SAVE_MASK_TABLE,
+	COMBIOS_HARDCODED_EDID_TABLE,
+	COMBIOS_ASIC_INIT_2_TABLE,
+	COMBIOS_CONNECTOR_INFO_TABLE,
+	COMBIOS_DYN_CLK_1_TABLE,
+	COMBIOS_RESERVED_MEM_TABLE,
+	COMBIOS_EXT_TMDS_INFO_TABLE,
+	COMBIOS_MEM_CLK_INFO_TABLE,
+	COMBIOS_EXT_DAC_INFO_TABLE,
+	COMBIOS_MISC_INFO_TABLE,
+	COMBIOS_CRT_INFO_TABLE,
+	COMBIOS_INTEGRATED_SYSTEM_INFO_TABLE,
+	COMBIOS_COMPONENT_VIDEO_INFO_TABLE,
+	COMBIOS_FAN_SPEED_INFO_TABLE,
+	COMBIOS_OVERDRIVE_INFO_TABLE,
+	COMBIOS_OEM_INFO_TABLE,
+	COMBIOS_DYN_CLK_2_TABLE,
+	COMBIOS_POWER_CONNECTOR_INFO_TABLE,
+	COMBIOS_I2C_INFO_TABLE,
+	/* relative offset tables */
+	COMBIOS_ASIC_INIT_3_TABLE,	/* offset from misc info */
+	COMBIOS_ASIC_INIT_4_TABLE,	/* offset from misc info */
+	COMBIOS_DETECTED_MEM_TABLE,	/* offset from misc info */
+	COMBIOS_ASIC_INIT_5_TABLE,	/* offset from misc info */
+	COMBIOS_RAM_RESET_TABLE,	/* offset from mem config */
+	COMBIOS_POWERPLAY_INFO_TABLE,	/* offset from mobile info */
+	COMBIOS_GPIO_INFO_TABLE,	/* offset from mobile info */
+	COMBIOS_LCD_DDC_INFO_TABLE,	/* offset from mobile info */
+	COMBIOS_TMDS_POWER_TABLE,	/* offset from mobile info */
+	COMBIOS_TMDS_POWER_ON_TABLE,	/* offset from tmds power */
+	COMBIOS_TMDS_POWER_OFF_TABLE,	/* offset from tmds power */
+};
+
+enum radeon_combios_ddc {
+	DDC_NONE_DETECTED,
+	DDC_MONID,
+	DDC_DVI,
+	DDC_VGA,
+	DDC_CRT2,
+	DDC_LCD,
+	DDC_GPIO,
+};
+
+enum radeon_combios_connector {
+	CONNECTOR_NONE_LEGACY,
+	CONNECTOR_PROPRIETARY_LEGACY,
+	CONNECTOR_CRT_LEGACY,
+	CONNECTOR_DVI_I_LEGACY,
+	CONNECTOR_DVI_D_LEGACY,
+	CONNECTOR_CTV_LEGACY,
+	CONNECTOR_STV_LEGACY,
+	CONNECTOR_UNSUPPORTED_LEGACY
+};
+
+const int legacy_connector_convert[] = {
+	DRM_MODE_CONNECTOR_Unknown,
+	DRM_MODE_CONNECTOR_DVID,
+	DRM_MODE_CONNECTOR_VGA,
+	DRM_MODE_CONNECTOR_DVII,
+	DRM_MODE_CONNECTOR_DVID,
+	DRM_MODE_CONNECTOR_Composite,
+	DRM_MODE_CONNECTOR_SVIDEO,
+	DRM_MODE_CONNECTOR_Unknown,
+};
+
+static uint16_t combios_get_table_offset(struct drm_device *dev,
+					 enum radeon_combios_table_offset table)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	int rev;
+	uint16_t offset = 0, check_offset;
+
+	switch (table) {
+		/* absolute offset tables */
+	case COMBIOS_ASIC_INIT_1_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0xc);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_BIOS_SUPPORT_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x14);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_DAC_PROGRAMMING_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x2a);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_MAX_COLOR_DEPTH_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x2c);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_CRTC_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x2e);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_PLL_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x30);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_TV_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x32);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_DFP_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x34);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_HW_CONFIG_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x36);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_MULTIMEDIA_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x38);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_TV_STD_PATCH_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x3e);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_LCD_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x40);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_MOBILE_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x42);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_PLL_INIT_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x46);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_MEM_CONFIG_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x48);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_SAVE_MASK_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x4a);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_HARDCODED_EDID_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x4c);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_ASIC_INIT_2_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x4e);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_CONNECTOR_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x50);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_DYN_CLK_1_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x52);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_RESERVED_MEM_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x54);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_EXT_TMDS_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x58);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_MEM_CLK_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x5a);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_EXT_DAC_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x5c);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_MISC_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x5e);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_CRT_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x60);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_INTEGRATED_SYSTEM_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x62);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_COMPONENT_VIDEO_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x64);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_FAN_SPEED_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x66);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_OVERDRIVE_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x68);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_OEM_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x6a);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_DYN_CLK_2_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x6c);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_POWER_CONNECTOR_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x6e);
+		if (check_offset)
+			offset = check_offset;
+		break;
+	case COMBIOS_I2C_INFO_TABLE:
+		check_offset = RBIOS16(rdev->bios_header_start + 0x70);
+		if (check_offset)
+			offset = check_offset;
+		break;
+		/* relative offset tables */
+	case COMBIOS_ASIC_INIT_3_TABLE:	/* offset from misc info */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MISC_INFO_TABLE);
+		if (check_offset) {
+			rev = RBIOS8(check_offset);
+			if (rev > 0) {
+				check_offset = RBIOS16(check_offset + 0x3);
+				if (check_offset)
+					offset = check_offset;
+			}
+		}
+		break;
+	case COMBIOS_ASIC_INIT_4_TABLE:	/* offset from misc info */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MISC_INFO_TABLE);
+		if (check_offset) {
+			rev = RBIOS8(check_offset);
+			if (rev > 0) {
+				check_offset = RBIOS16(check_offset + 0x5);
+				if (check_offset)
+					offset = check_offset;
+			}
+		}
+		break;
+	case COMBIOS_DETECTED_MEM_TABLE:	/* offset from misc info */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MISC_INFO_TABLE);
+		if (check_offset) {
+			rev = RBIOS8(check_offset);
+			if (rev > 0) {
+				check_offset = RBIOS16(check_offset + 0x7);
+				if (check_offset)
+					offset = check_offset;
+			}
+		}
+		break;
+	case COMBIOS_ASIC_INIT_5_TABLE:	/* offset from misc info */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MISC_INFO_TABLE);
+		if (check_offset) {
+			rev = RBIOS8(check_offset);
+			if (rev == 2) {
+				check_offset = RBIOS16(check_offset + 0x9);
+				if (check_offset)
+					offset = check_offset;
+			}
+		}
+		break;
+	case COMBIOS_RAM_RESET_TABLE:	/* offset from mem config */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MEM_CONFIG_TABLE);
+		if (check_offset) {
+			while (RBIOS8(check_offset++));
+			check_offset += 2;
+			if (check_offset)
+				offset = check_offset;
+		}
+		break;
+	case COMBIOS_POWERPLAY_INFO_TABLE:	/* offset from mobile info */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MOBILE_INFO_TABLE);
+		if (check_offset) {
+			check_offset = RBIOS16(check_offset + 0x11);
+			if (check_offset)
+				offset = check_offset;
+		}
+		break;
+	case COMBIOS_GPIO_INFO_TABLE:	/* offset from mobile info */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MOBILE_INFO_TABLE);
+		if (check_offset) {
+			check_offset = RBIOS16(check_offset + 0x13);
+			if (check_offset)
+				offset = check_offset;
+		}
+		break;
+	case COMBIOS_LCD_DDC_INFO_TABLE:	/* offset from mobile info */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MOBILE_INFO_TABLE);
+		if (check_offset) {
+			check_offset = RBIOS16(check_offset + 0x15);
+			if (check_offset)
+				offset = check_offset;
+		}
+		break;
+	case COMBIOS_TMDS_POWER_TABLE:	/* offset from mobile info */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_MOBILE_INFO_TABLE);
+		if (check_offset) {
+			check_offset = RBIOS16(check_offset + 0x17);
+			if (check_offset)
+				offset = check_offset;
+		}
+		break;
+	case COMBIOS_TMDS_POWER_ON_TABLE:	/* offset from tmds power */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_TMDS_POWER_TABLE);
+		if (check_offset) {
+			check_offset = RBIOS16(check_offset + 0x2);
+			if (check_offset)
+				offset = check_offset;
+		}
+		break;
+	case COMBIOS_TMDS_POWER_OFF_TABLE:	/* offset from tmds power */
+		check_offset =
+		    combios_get_table_offset(dev, COMBIOS_TMDS_POWER_TABLE);
+		if (check_offset) {
+			check_offset = RBIOS16(check_offset + 0x4);
+			if (check_offset)
+				offset = check_offset;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return offset;
+
+}
+
+struct radeon_i2c_bus_rec combios_setup_i2c_bus(int ddc_line)
+{
+	struct radeon_i2c_bus_rec i2c;
+
+	i2c.mask_clk_mask = RADEON_GPIO_EN_1;
+	i2c.mask_data_mask = RADEON_GPIO_EN_0;
+	i2c.a_clk_mask = RADEON_GPIO_A_1;
+	i2c.a_data_mask = RADEON_GPIO_A_0;
+	i2c.put_clk_mask = RADEON_GPIO_EN_1;
+	i2c.put_data_mask = RADEON_GPIO_EN_0;
+	i2c.get_clk_mask = RADEON_GPIO_Y_1;
+	i2c.get_data_mask = RADEON_GPIO_Y_0;
+	if ((ddc_line == RADEON_LCD_GPIO_MASK) ||
+	    (ddc_line == RADEON_MDGPIO_EN_REG)) {
+		i2c.mask_clk_reg = ddc_line;
+		i2c.mask_data_reg = ddc_line;
+		i2c.a_clk_reg = ddc_line;
+		i2c.a_data_reg = ddc_line;
+		i2c.put_clk_reg = ddc_line;
+		i2c.put_data_reg = ddc_line;
+		i2c.get_clk_reg = ddc_line + 4;
+		i2c.get_data_reg = ddc_line + 4;
+	} else {
+		i2c.mask_clk_reg = ddc_line;
+		i2c.mask_data_reg = ddc_line;
+		i2c.a_clk_reg = ddc_line;
+		i2c.a_data_reg = ddc_line;
+		i2c.put_clk_reg = ddc_line;
+		i2c.put_data_reg = ddc_line;
+		i2c.get_clk_reg = ddc_line;
+		i2c.get_data_reg = ddc_line;
+	}
+
+	if (ddc_line)
+		i2c.valid = true;
+	else
+		i2c.valid = false;
+
+	return i2c;
+}
+
+bool radeon_combios_get_clock_info(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint16_t pll_info;
+	struct radeon_pll *p1pll = &rdev->clock.p1pll;
+	struct radeon_pll *p2pll = &rdev->clock.p2pll;
+	struct radeon_pll *spll = &rdev->clock.spll;
+	struct radeon_pll *mpll = &rdev->clock.mpll;
+	int8_t rev;
+	uint16_t sclk, mclk;
+
+	if (rdev->bios == NULL)
+		return NULL;
+
+	pll_info = combios_get_table_offset(dev, COMBIOS_PLL_INFO_TABLE);
+	if (pll_info) {
+		rev = RBIOS8(pll_info);
+
+		/* pixel clocks */
+		p1pll->reference_freq = RBIOS16(pll_info + 0xe);
+		p1pll->reference_div = RBIOS16(pll_info + 0x10);
+		p1pll->pll_out_min = RBIOS32(pll_info + 0x12);
+		p1pll->pll_out_max = RBIOS32(pll_info + 0x16);
+
+		if (rev > 9) {
+			p1pll->pll_in_min = RBIOS32(pll_info + 0x36);
+			p1pll->pll_in_max = RBIOS32(pll_info + 0x3a);
+		} else {
+			p1pll->pll_in_min = 40;
+			p1pll->pll_in_max = 500;
+		}
+		*p2pll = *p1pll;
+
+		/* system clock */
+		spll->reference_freq = RBIOS16(pll_info + 0x1a);
+		spll->reference_div = RBIOS16(pll_info + 0x1c);
+		spll->pll_out_min = RBIOS32(pll_info + 0x1e);
+		spll->pll_out_max = RBIOS32(pll_info + 0x22);
+
+		if (rev > 10) {
+			spll->pll_in_min = RBIOS32(pll_info + 0x48);
+			spll->pll_in_max = RBIOS32(pll_info + 0x4c);
+		} else {
+			/* ??? */
+			spll->pll_in_min = 40;
+			spll->pll_in_max = 500;
+		}
+
+		/* memory clock */
+		mpll->reference_freq = RBIOS16(pll_info + 0x26);
+		mpll->reference_div = RBIOS16(pll_info + 0x28);
+		mpll->pll_out_min = RBIOS32(pll_info + 0x2a);
+		mpll->pll_out_max = RBIOS32(pll_info + 0x2e);
+
+		if (rev > 10) {
+			mpll->pll_in_min = RBIOS32(pll_info + 0x5a);
+			mpll->pll_in_max = RBIOS32(pll_info + 0x5e);
+		} else {
+			/* ??? */
+			mpll->pll_in_min = 40;
+			mpll->pll_in_max = 500;
+		}
+
+		/* default sclk/mclk */
+		sclk = RBIOS16(pll_info + 0xa);
+		mclk = RBIOS16(pll_info + 0x8);
+		if (sclk == 0)
+			sclk = 200 * 100;
+		if (mclk == 0)
+			mclk = 200 * 100;
+
+		rdev->clock.default_sclk = sclk;
+		rdev->clock.default_mclk = mclk;
+
+		return true;
+	}
+	return false;
+}
+
+struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct
+								       radeon_encoder
+								       *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint16_t dac_info;
+	uint8_t rev, bg, dac;
+	struct radeon_encoder_primary_dac *p_dac = NULL;
+
+	if (rdev->bios == NULL)
+		return NULL;
+
+	/* check CRT table */
+	dac_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
+	if (dac_info) {
+		p_dac =
+		    kzalloc(sizeof(struct radeon_encoder_primary_dac),
+			    GFP_KERNEL);
+
+		if (!p_dac)
+			return NULL;
+
+		rev = RBIOS8(dac_info) & 0x3;
+		if (rev < 2) {
+			bg = RBIOS8(dac_info + 0x2) & 0xf;
+			dac = (RBIOS8(dac_info + 0x2) >> 4) & 0xf;
+			p_dac->ps2_pdac_adj = (bg << 8) | (dac);
+		} else {
+			bg = RBIOS8(dac_info + 0x2) & 0xf;
+			dac = RBIOS8(dac_info + 0x3) & 0xf;
+			p_dac->ps2_pdac_adj = (bg << 8) | (dac);
+		}
+
+	}
+
+	return p_dac;
+}
+
+static enum radeon_tv_std
+radeon_combios_get_tv_info(struct radeon_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint16_t tv_info;
+	enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+	tv_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
+	if (tv_info) {
+		if (RBIOS8(tv_info + 6) == 'T') {
+			switch (RBIOS8(tv_info + 7) & 0xf) {
+			case 1:
+				tv_std = TV_STD_NTSC;
+				DRM_INFO("Default TV standard: NTSC\n");
+				break;
+			case 2:
+				tv_std = TV_STD_PAL;
+				DRM_INFO("Default TV standard: PAL\n");
+				break;
+			case 3:
+				tv_std = TV_STD_PAL_M;
+				DRM_INFO("Default TV standard: PAL-M\n");
+				break;
+			case 4:
+				tv_std = TV_STD_PAL_60;
+				DRM_INFO("Default TV standard: PAL-60\n");
+				break;
+			case 5:
+				tv_std = TV_STD_NTSC_J;
+				DRM_INFO("Default TV standard: NTSC-J\n");
+				break;
+			case 6:
+				tv_std = TV_STD_SCART_PAL;
+				DRM_INFO("Default TV standard: SCART-PAL\n");
+				break;
+			default:
+				tv_std = TV_STD_NTSC;
+				DRM_INFO
+				    ("Unknown TV standard; defaulting to NTSC\n");
+				break;
+			}
+
+			switch ((RBIOS8(tv_info + 9) >> 2) & 0x3) {
+			case 0:
+				DRM_INFO("29.498928713 MHz TV ref clk\n");
+				break;
+			case 1:
+				DRM_INFO("28.636360000 MHz TV ref clk\n");
+				break;
+			case 2:
+				DRM_INFO("14.318180000 MHz TV ref clk\n");
+				break;
+			case 3:
+				DRM_INFO("27.000000000 MHz TV ref clk\n");
+				break;
+			default:
+				break;
+			}
+		}
+	}
+	return tv_std;
+}
+
+static const uint32_t default_tvdac_adj[CHIP_LAST] = {
+	0x00000000,		/* r100  */
+	0x00280000,		/* rv100 */
+	0x00000000,		/* rs100 */
+	0x00880000,		/* rv200 */
+	0x00000000,		/* rs200 */
+	0x00000000,		/* r200  */
+	0x00770000,		/* rv250 */
+	0x00290000,		/* rs300 */
+	0x00560000,		/* rv280 */
+	0x00780000,		/* r300  */
+	0x00770000,		/* r350  */
+	0x00780000,		/* rv350 */
+	0x00780000,		/* rv380 */
+	0x01080000,		/* r420  */
+	0x01080000,		/* r423  */
+	0x01080000,		/* rv410 */
+	0x00780000,		/* rs400 */
+	0x00780000,		/* rs480 */
+};
+
+static struct radeon_encoder_tv_dac
+    *radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev)
+{
+	struct radeon_encoder_tv_dac *tv_dac = NULL;
+
+	tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
+
+	if (!tv_dac)
+		return NULL;
+
+	tv_dac->ps2_tvdac_adj = default_tvdac_adj[rdev->family];
+	if ((rdev->flags & RADEON_IS_MOBILITY) && (rdev->family == CHIP_RV250))
+		tv_dac->ps2_tvdac_adj = 0x00880000;
+	tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
+	tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+
+	return tv_dac;
+}
+
+struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct
+							     radeon_encoder
+							     *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint16_t dac_info;
+	uint8_t rev, bg, dac;
+	struct radeon_encoder_tv_dac *tv_dac = NULL;
+
+	if (rdev->bios == NULL)
+		return radeon_legacy_get_tv_dac_info_from_table(rdev);
+
+	/* first check TV table */
+	dac_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
+	if (dac_info) {
+		tv_dac =
+		    kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
+
+		if (!tv_dac)
+			return NULL;
+
+		rev = RBIOS8(dac_info + 0x3);
+		if (rev > 4) {
+			bg = RBIOS8(dac_info + 0xc) & 0xf;
+			dac = RBIOS8(dac_info + 0xd) & 0xf;
+			tv_dac->ps2_tvdac_adj = (bg << 16) | (dac << 20);
+
+			bg = RBIOS8(dac_info + 0xe) & 0xf;
+			dac = RBIOS8(dac_info + 0xf) & 0xf;
+			tv_dac->pal_tvdac_adj = (bg << 16) | (dac << 20);
+
+			bg = RBIOS8(dac_info + 0x10) & 0xf;
+			dac = RBIOS8(dac_info + 0x11) & 0xf;
+			tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+		} else if (rev > 1) {
+			bg = RBIOS8(dac_info + 0xc) & 0xf;
+			dac = (RBIOS8(dac_info + 0xc) >> 4) & 0xf;
+			tv_dac->ps2_tvdac_adj = (bg << 16) | (dac << 20);
+
+			bg = RBIOS8(dac_info + 0xd) & 0xf;
+			dac = (RBIOS8(dac_info + 0xd) >> 4) & 0xf;
+			tv_dac->pal_tvdac_adj = (bg << 16) | (dac << 20);
+
+			bg = RBIOS8(dac_info + 0xe) & 0xf;
+			dac = (RBIOS8(dac_info + 0xe) >> 4) & 0xf;
+			tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
+		}
+
+		tv_dac->tv_std = radeon_combios_get_tv_info(encoder);
+
+	} else {
+		/* then check CRT table */
+		dac_info =
+		    combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
+		if (dac_info) {
+			tv_dac =
+			    kzalloc(sizeof(struct radeon_encoder_tv_dac),
+				    GFP_KERNEL);
+
+			if (!tv_dac)
+				return NULL;
+
+			rev = RBIOS8(dac_info) & 0x3;
+			if (rev < 2) {
+				bg = RBIOS8(dac_info + 0x3) & 0xf;
+				dac = (RBIOS8(dac_info + 0x3) >> 4) & 0xf;
+				tv_dac->ps2_tvdac_adj =
+				    (bg << 16) | (dac << 20);
+				tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
+				tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+			} else {
+				bg = RBIOS8(dac_info + 0x4) & 0xf;
+				dac = RBIOS8(dac_info + 0x5) & 0xf;
+				tv_dac->ps2_tvdac_adj =
+				    (bg << 16) | (dac << 20);
+				tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
+				tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
+			}
+		} else {
+			DRM_INFO("No TV DAC info found in BIOS\n");
+			return radeon_legacy_get_tv_dac_info_from_table(rdev);
+		}
+	}
+
+	return tv_dac;
+}
+
+static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct
+									 radeon_device
+									 *rdev)
+{
+	struct radeon_encoder_lvds *lvds = NULL;
+	uint32_t fp_vert_stretch, fp_horz_stretch;
+	uint32_t ppll_div_sel, ppll_val;
+
+	lvds = kzalloc(sizeof(struct radeon_encoder_lvds), GFP_KERNEL);
+
+	if (!lvds)
+		return NULL;
+
+	fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH);
+	fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH);
+
+	if (fp_vert_stretch & RADEON_VERT_STRETCH_ENABLE)
+		lvds->native_mode.panel_yres =
+		    ((fp_vert_stretch & RADEON_VERT_PANEL_SIZE) >>
+		     RADEON_VERT_PANEL_SHIFT) + 1;
+	else
+		lvds->native_mode.panel_yres =
+		    (RREG32(RADEON_CRTC_V_TOTAL_DISP) >> 16) + 1;
+
+	if (fp_horz_stretch & RADEON_HORZ_STRETCH_ENABLE)
+		lvds->native_mode.panel_xres =
+		    (((fp_horz_stretch & RADEON_HORZ_PANEL_SIZE) >>
+		      RADEON_HORZ_PANEL_SHIFT) + 1) * 8;
+	else
+		lvds->native_mode.panel_xres =
+		    ((RREG32(RADEON_CRTC_H_TOTAL_DISP) >> 16) + 1) * 8;
+
+	if ((lvds->native_mode.panel_xres < 640) ||
+	    (lvds->native_mode.panel_yres < 480)) {
+		lvds->native_mode.panel_xres = 640;
+		lvds->native_mode.panel_yres = 480;
+	}
+
+	ppll_div_sel = RREG8(RADEON_CLOCK_CNTL_INDEX + 1) & 0x3;
+	ppll_val = RREG32_PLL(RADEON_PPLL_DIV_0 + ppll_div_sel);
+	if ((ppll_val & 0x000707ff) == 0x1bb)
+		lvds->use_bios_dividers = false;
+	else {
+		lvds->panel_ref_divider =
+		    RREG32_PLL(RADEON_PPLL_REF_DIV) & 0x3ff;
+		lvds->panel_post_divider = (ppll_val >> 16) & 0x7;
+		lvds->panel_fb_divider = ppll_val & 0x7ff;
+
+		if ((lvds->panel_ref_divider != 0) &&
+		    (lvds->panel_fb_divider > 3))
+			lvds->use_bios_dividers = true;
+	}
+	lvds->panel_vcc_delay = 200;
+
+	DRM_INFO("Panel info derived from registers\n");
+	DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres,
+		 lvds->native_mode.panel_yres);
+
+	return lvds;
+}
+
+struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder
+							 *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint16_t lcd_info;
+	uint32_t panel_setup;
+	char stmp[30];
+	int tmp, i;
+	struct radeon_encoder_lvds *lvds = NULL;
+
+	if (rdev->bios == NULL)
+		return radeon_legacy_get_lvds_info_from_regs(rdev);
+
+	lcd_info = combios_get_table_offset(dev, COMBIOS_LCD_INFO_TABLE);
+
+	if (lcd_info) {
+		lvds = kzalloc(sizeof(struct radeon_encoder_lvds), GFP_KERNEL);
+
+		if (!lvds)
+			return NULL;
+
+		for (i = 0; i < 24; i++)
+			stmp[i] = RBIOS8(lcd_info + i + 1);
+		stmp[24] = 0;
+
+		DRM_INFO("Panel ID String: %s\n", stmp);
+
+		lvds->native_mode.panel_xres = RBIOS16(lcd_info + 0x19);
+		lvds->native_mode.panel_yres = RBIOS16(lcd_info + 0x1b);
+
+		DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres,
+			 lvds->native_mode.panel_yres);
+
+		lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c);
+		if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0)
+			lvds->panel_vcc_delay = 2000;
+
+		lvds->panel_pwr_delay = RBIOS8(lcd_info + 0x24);
+		lvds->panel_digon_delay = RBIOS16(lcd_info + 0x38) & 0xf;
+		lvds->panel_blon_delay = (RBIOS16(lcd_info + 0x38) >> 4) & 0xf;
+
+		lvds->panel_ref_divider = RBIOS16(lcd_info + 0x2e);
+		lvds->panel_post_divider = RBIOS8(lcd_info + 0x30);
+		lvds->panel_fb_divider = RBIOS16(lcd_info + 0x31);
+		if ((lvds->panel_ref_divider != 0) &&
+		    (lvds->panel_fb_divider > 3))
+			lvds->use_bios_dividers = true;
+
+		panel_setup = RBIOS32(lcd_info + 0x39);
+		lvds->lvds_gen_cntl = 0xff00;
+		if (panel_setup & 0x1)
+			lvds->lvds_gen_cntl |= RADEON_LVDS_PANEL_FORMAT;
+
+		if ((panel_setup >> 4) & 0x1)
+			lvds->lvds_gen_cntl |= RADEON_LVDS_PANEL_TYPE;
+
+		switch ((panel_setup >> 8) & 0x7) {
+		case 0:
+			lvds->lvds_gen_cntl |= RADEON_LVDS_NO_FM;
+			break;
+		case 1:
+			lvds->lvds_gen_cntl |= RADEON_LVDS_2_GREY;
+			break;
+		case 2:
+			lvds->lvds_gen_cntl |= RADEON_LVDS_4_GREY;
+			break;
+		default:
+			break;
+		}
+
+		if ((panel_setup >> 16) & 0x1)
+			lvds->lvds_gen_cntl |= RADEON_LVDS_FP_POL_LOW;
+
+		if ((panel_setup >> 17) & 0x1)
+			lvds->lvds_gen_cntl |= RADEON_LVDS_LP_POL_LOW;
+
+		if ((panel_setup >> 18) & 0x1)
+			lvds->lvds_gen_cntl |= RADEON_LVDS_DTM_POL_LOW;
+
+		if ((panel_setup >> 23) & 0x1)
+			lvds->lvds_gen_cntl |= RADEON_LVDS_BL_CLK_SEL;
+
+		lvds->lvds_gen_cntl |= (panel_setup & 0xf0000000);
+
+		for (i = 0; i < 32; i++) {
+			tmp = RBIOS16(lcd_info + 64 + i * 2);
+			if (tmp == 0)
+				break;
+
+			if ((RBIOS16(tmp) == lvds->native_mode.panel_xres) &&
+			    (RBIOS16(tmp + 2) ==
+			     lvds->native_mode.panel_yres)) {
+				lvds->native_mode.hblank =
+				    (RBIOS16(tmp + 17) - RBIOS16(tmp + 19)) * 8;
+				lvds->native_mode.hoverplus =
+				    (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) -
+				     1) * 8;
+				lvds->native_mode.hsync_width =
+				    RBIOS8(tmp + 23) * 8;
+
+				lvds->native_mode.vblank = (RBIOS16(tmp + 24) -
+							    RBIOS16(tmp + 26));
+				lvds->native_mode.voverplus =
+				    ((RBIOS16(tmp + 28) & 0x7ff) -
+				     RBIOS16(tmp + 26));
+				lvds->native_mode.vsync_width =
+				    ((RBIOS16(tmp + 28) & 0xf800) >> 11);
+				lvds->native_mode.dotclock =
+				    RBIOS16(tmp + 9) * 10;
+				lvds->native_mode.flags = 0;
+			}
+		}
+		encoder->native_mode = lvds->native_mode;
+	} else {
+		DRM_INFO("No panel info found in BIOS\n");
+		return radeon_legacy_get_lvds_info_from_regs(rdev);
+	}
+	return lvds;
+}
+
+static const struct radeon_tmds_pll default_tmds_pll[CHIP_LAST][4] = {
+	{{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},	/* CHIP_R100  */
+	{{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},	/* CHIP_RV100 */
+	{{0, 0}, {0, 0}, {0, 0}, {0, 0}},	/* CHIP_RS100 */
+	{{15000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},	/* CHIP_RV200 */
+	{{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},	/* CHIP_RS200 */
+	{{15000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}},	/* CHIP_R200  */
+	{{15500, 0x81b}, {0xffffffff, 0x83f}, {0, 0}, {0, 0}},	/* CHIP_RV250 */
+	{{0, 0}, {0, 0}, {0, 0}, {0, 0}},	/* CHIP_RS300 */
+	{{13000, 0x400f4}, {15000, 0x400f7}, {0xffffffff, 0x40111}, {0, 0}},	/* CHIP_RV280 */
+	{{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}},	/* CHIP_R300  */
+	{{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}},	/* CHIP_R350  */
+	{{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}},	/* CHIP_RV350 */
+	{{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}},	/* CHIP_RV380 */
+	{{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}},	/* CHIP_R420  */
+	{{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}},	/* CHIP_R423  */
+	{{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}},	/* CHIP_RV410 */
+	{{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}},	/* CHIP_RS400 */
+	{{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}},	/* CHIP_RS480 */
+};
+
+static struct radeon_encoder_int_tmds
+    *radeon_legacy_get_tmds_info_from_table(struct radeon_device *rdev)
+{
+	int i;
+	struct radeon_encoder_int_tmds *tmds = NULL;
+
+	tmds = kzalloc(sizeof(struct radeon_encoder_int_tmds), GFP_KERNEL);
+
+	if (!tmds)
+		return NULL;
+
+	for (i = 0; i < 4; i++) {
+		tmds->tmds_pll[i].value =
+		    default_tmds_pll[rdev->family][i].value;
+		tmds->tmds_pll[i].freq = default_tmds_pll[rdev->family][i].freq;
+	}
+
+	return tmds;
+}
+
+struct radeon_encoder_int_tmds *radeon_combios_get_tmds_info(struct
+							     radeon_encoder
+							     *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint16_t tmds_info;
+	int i, n;
+	uint8_t ver;
+	struct radeon_encoder_int_tmds *tmds = NULL;
+
+	if (rdev->bios == NULL)
+		return radeon_legacy_get_tmds_info_from_table(rdev);
+
+	tmds_info = combios_get_table_offset(dev, COMBIOS_DFP_INFO_TABLE);
+
+	if (tmds_info) {
+		tmds =
+		    kzalloc(sizeof(struct radeon_encoder_int_tmds), GFP_KERNEL);
+
+		if (!tmds)
+			return NULL;
+
+		ver = RBIOS8(tmds_info);
+		DRM_INFO("DFP table revision: %d\n", ver);
+		if (ver == 3) {
+			n = RBIOS8(tmds_info + 5) + 1;
+			if (n > 4)
+				n = 4;
+			for (i = 0; i < n; i++) {
+				tmds->tmds_pll[i].value =
+				    RBIOS32(tmds_info + i * 10 + 0x08);
+				tmds->tmds_pll[i].freq =
+				    RBIOS16(tmds_info + i * 10 + 0x10);
+				DRM_DEBUG("TMDS PLL From COMBIOS %u %x\n",
+					  tmds->tmds_pll[i].freq,
+					  tmds->tmds_pll[i].value);
+			}
+		} else if (ver == 4) {
+			int stride = 0;
+			n = RBIOS8(tmds_info + 5) + 1;
+			if (n > 4)
+				n = 4;
+			for (i = 0; i < n; i++) {
+				tmds->tmds_pll[i].value =
+				    RBIOS32(tmds_info + stride + 0x08);
+				tmds->tmds_pll[i].freq =
+				    RBIOS16(tmds_info + stride + 0x10);
+				if (i == 0)
+					stride += 10;
+				else
+					stride += 6;
+				DRM_DEBUG("TMDS PLL From COMBIOS %u %x\n",
+					  tmds->tmds_pll[i].freq,
+					  tmds->tmds_pll[i].value);
+			}
+		}
+	} else
+		DRM_INFO("No TMDS info found in BIOS\n");
+	return tmds;
+}
+
+void radeon_combios_get_ext_tmds_info(struct radeon_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint16_t ext_tmds_info;
+	uint8_t ver;
+
+	if (rdev->bios == NULL)
+		return;
+
+	ext_tmds_info =
+	    combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE);
+	if (ext_tmds_info) {
+		ver = RBIOS8(ext_tmds_info);
+		DRM_INFO("External TMDS Table revision: %d\n", ver);
+		// TODO
+	}
+}
+
+bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_i2c_bus_rec ddc_i2c;
+
+	rdev->mode_info.connector_table = radeon_connector_table;
+	if (rdev->mode_info.connector_table == CT_NONE) {
+#ifdef CONFIG_PPC_PMAC
+		if (machine_is_compatible("PowerBook3,3")) {
+			/* powerbook with VGA */
+			rdev->mode_info.connector_table = CT_POWERBOOK_VGA;
+		} else if (machine_is_compatible("PowerBook3,4") ||
+			   machine_is_compatible("PowerBook3,5")) {
+			/* powerbook with internal tmds */
+			rdev->mode_info.connector_table = CT_POWERBOOK_INTERNAL;
+		} else if (machine_is_compatible("PowerBook5,1") ||
+			   machine_is_compatible("PowerBook5,2") ||
+			   machine_is_compatible("PowerBook5,3") ||
+			   machine_is_compatible("PowerBook5,4") ||
+			   machine_is_compatible("PowerBook5,5")) {
+			/* powerbook with external single link tmds (sil164) */
+			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
+		} else if (machine_is_compatible("PowerBook5,6")) {
+			/* powerbook with external dual or single link tmds */
+			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
+		} else if (machine_is_compatible("PowerBook5,7") ||
+			   machine_is_compatible("PowerBook5,8") ||
+			   machine_is_compatible("PowerBook5,9")) {
+			/* PowerBook6,2 ? */
+			/* powerbook with external dual link tmds (sil1178?) */
+			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
+		} else if (machine_is_compatible("PowerBook4,1") ||
+			   machine_is_compatible("PowerBook4,2") ||
+			   machine_is_compatible("PowerBook4,3") ||
+			   machine_is_compatible("PowerBook6,3") ||
+			   machine_is_compatible("PowerBook6,5") ||
+			   machine_is_compatible("PowerBook6,7")) {
+			/* ibook */
+			rdev->mode_info.connector_table = CT_IBOOK;
+		} else if (machine_is_compatible("PowerMac4,4")) {
+			/* emac */
+			rdev->mode_info.connector_table = CT_EMAC;
+		} else if (machine_is_compatible("PowerMac10,1")) {
+			/* mini with internal tmds */
+			rdev->mode_info.connector_table = CT_MINI_INTERNAL;
+		} else if (machine_is_compatible("PowerMac10,2")) {
+			/* mini with external tmds */
+			rdev->mode_info.connector_table = CT_MINI_EXTERNAL;
+		} else if (machine_is_compatible("PowerMac12,1")) {
+			/* PowerMac8,1 ? */
+			/* imac g5 isight */
+			rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
+		} else
+#endif /* CONFIG_PPC_PMAC */
+			rdev->mode_info.connector_table = CT_GENERIC;
+	}
+
+	switch (rdev->mode_info.connector_table) {
+	case CT_GENERIC:
+		DRM_INFO("Connector Table: %d (generic)\n",
+			 rdev->mode_info.connector_table);
+		/* these are the most common settings */
+		if (rdev->flags & RADEON_SINGLE_CRTC) {
+			/* VGA - primary dac */
+			ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_CRT1_SUPPORT,
+									1),
+						  ATOM_DEVICE_CRT1_SUPPORT);
+			radeon_add_legacy_connector(dev, 0,
+						    ATOM_DEVICE_CRT1_SUPPORT,
+						    DRM_MODE_CONNECTOR_VGA,
+						    &ddc_i2c);
+		} else if (rdev->flags & RADEON_IS_MOBILITY) {
+			/* LVDS */
+			ddc_i2c = combios_setup_i2c_bus(RADEON_LCD_GPIO_MASK);
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_LCD1_SUPPORT,
+									0),
+						  ATOM_DEVICE_LCD1_SUPPORT);
+			radeon_add_legacy_connector(dev, 0,
+						    ATOM_DEVICE_LCD1_SUPPORT,
+						    DRM_MODE_CONNECTOR_LVDS,
+						    &ddc_i2c);
+
+			/* VGA - primary dac */
+			ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_CRT1_SUPPORT,
+									1),
+						  ATOM_DEVICE_CRT1_SUPPORT);
+			radeon_add_legacy_connector(dev, 1,
+						    ATOM_DEVICE_CRT1_SUPPORT,
+						    DRM_MODE_CONNECTOR_VGA,
+						    &ddc_i2c);
+		} else {
+			/* DVI-I - tv dac, int tmds */
+			ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_DFP1_SUPPORT,
+									0),
+						  ATOM_DEVICE_DFP1_SUPPORT);
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_CRT2_SUPPORT,
+									2),
+						  ATOM_DEVICE_CRT2_SUPPORT);
+			radeon_add_legacy_connector(dev, 0,
+						    ATOM_DEVICE_DFP1_SUPPORT |
+						    ATOM_DEVICE_CRT2_SUPPORT,
+						    DRM_MODE_CONNECTOR_DVII,
+						    &ddc_i2c);
+
+			/* VGA - primary dac */
+			ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_CRT1_SUPPORT,
+									1),
+						  ATOM_DEVICE_CRT1_SUPPORT);
+			radeon_add_legacy_connector(dev, 1,
+						    ATOM_DEVICE_CRT1_SUPPORT,
+						    DRM_MODE_CONNECTOR_VGA,
+						    &ddc_i2c);
+		}
+
+		if (rdev->family != CHIP_R100 && rdev->family != CHIP_R200) {
+			/* TV - tv dac */
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_TV1_SUPPORT,
+									2),
+						  ATOM_DEVICE_TV1_SUPPORT);
+			radeon_add_legacy_connector(dev, 2,
+						    ATOM_DEVICE_TV1_SUPPORT,
+						    DRM_MODE_CONNECTOR_SVIDEO,
+						    &ddc_i2c);
+		}
+		break;
+	case CT_IBOOK:
+		DRM_INFO("Connector Table: %d (ibook)\n",
+			 rdev->mode_info.connector_table);
+		/* LVDS */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_LCD1_SUPPORT,
+								0),
+					  ATOM_DEVICE_LCD1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT,
+					    DRM_MODE_CONNECTOR_LVDS, &ddc_i2c);
+		/* VGA - TV DAC */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT2_SUPPORT,
+								2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+		/* TV - TV DAC */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c);
+		break;
+	case CT_POWERBOOK_EXTERNAL:
+		DRM_INFO("Connector Table: %d (powerbook external tmds)\n",
+			 rdev->mode_info.connector_table);
+		/* LVDS */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_LCD1_SUPPORT,
+								0),
+					  ATOM_DEVICE_LCD1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT,
+					    DRM_MODE_CONNECTOR_LVDS, &ddc_i2c);
+		/* DVI-I - primary dac, ext tmds */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_DFP2_SUPPORT,
+								0),
+					  ATOM_DEVICE_DFP2_SUPPORT);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT1_SUPPORT,
+								1),
+					  ATOM_DEVICE_CRT1_SUPPORT);
+		radeon_add_legacy_connector(dev, 1,
+					    ATOM_DEVICE_DFP2_SUPPORT |
+					    ATOM_DEVICE_CRT1_SUPPORT,
+					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c);
+		/* TV - TV DAC */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c);
+		break;
+	case CT_POWERBOOK_INTERNAL:
+		DRM_INFO("Connector Table: %d (powerbook internal tmds)\n",
+			 rdev->mode_info.connector_table);
+		/* LVDS */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_LCD1_SUPPORT,
+								0),
+					  ATOM_DEVICE_LCD1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT,
+					    DRM_MODE_CONNECTOR_LVDS, &ddc_i2c);
+		/* DVI-I - primary dac, int tmds */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_DFP1_SUPPORT,
+								0),
+					  ATOM_DEVICE_DFP1_SUPPORT);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT1_SUPPORT,
+								1),
+					  ATOM_DEVICE_CRT1_SUPPORT);
+		radeon_add_legacy_connector(dev, 1,
+					    ATOM_DEVICE_DFP1_SUPPORT |
+					    ATOM_DEVICE_CRT1_SUPPORT,
+					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c);
+		/* TV - TV DAC */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c);
+		break;
+	case CT_POWERBOOK_VGA:
+		DRM_INFO("Connector Table: %d (powerbook vga)\n",
+			 rdev->mode_info.connector_table);
+		/* LVDS */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_LCD1_SUPPORT,
+								0),
+					  ATOM_DEVICE_LCD1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT,
+					    DRM_MODE_CONNECTOR_LVDS, &ddc_i2c);
+		/* VGA - primary dac */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT1_SUPPORT,
+								1),
+					  ATOM_DEVICE_CRT1_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+		/* TV - TV DAC */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c);
+		break;
+	case CT_MINI_EXTERNAL:
+		DRM_INFO("Connector Table: %d (mini external tmds)\n",
+			 rdev->mode_info.connector_table);
+		/* DVI-I - tv dac, ext tmds */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_DFP2_SUPPORT,
+								0),
+					  ATOM_DEVICE_DFP2_SUPPORT);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT2_SUPPORT,
+								2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 0,
+					    ATOM_DEVICE_DFP2_SUPPORT |
+					    ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c);
+		/* TV - TV DAC */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c);
+		break;
+	case CT_MINI_INTERNAL:
+		DRM_INFO("Connector Table: %d (mini internal tmds)\n",
+			 rdev->mode_info.connector_table);
+		/* DVI-I - tv dac, int tmds */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_DFP1_SUPPORT,
+								0),
+					  ATOM_DEVICE_DFP1_SUPPORT);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT2_SUPPORT,
+								2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 0,
+					    ATOM_DEVICE_DFP1_SUPPORT |
+					    ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c);
+		/* TV - TV DAC */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c);
+		break;
+	case CT_IMAC_G5_ISIGHT:
+		DRM_INFO("Connector Table: %d (imac g5 isight)\n",
+			 rdev->mode_info.connector_table);
+		/* DVI-D - int tmds */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_MONID);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_DFP1_SUPPORT,
+								0),
+					  ATOM_DEVICE_DFP1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT,
+					    DRM_MODE_CONNECTOR_DVID, &ddc_i2c);
+		/* VGA - tv dac */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT2_SUPPORT,
+								2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+		/* TV - TV DAC */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c);
+		break;
+	case CT_EMAC:
+		DRM_INFO("Connector Table: %d (emac)\n",
+			 rdev->mode_info.connector_table);
+		/* VGA - primary dac */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT1_SUPPORT,
+								1),
+					  ATOM_DEVICE_CRT1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+		/* VGA - tv dac */
+		ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_CRT2_SUPPORT,
+								2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+		/* TV - TV DAC */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_id(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c);
+		break;
+	default:
+		DRM_INFO("Connector table: %d (invalid)\n",
+			 rdev->mode_info.connector_table);
+		return false;
+	}
+
+	radeon_link_encoder_connector(dev);
+
+	return true;
+}
+
+static bool radeon_apply_legacy_quirks(struct drm_device *dev,
+				       int bios_index,
+				       enum radeon_combios_connector
+				       *legacy_connector,
+				       struct radeon_i2c_bus_rec *ddc_i2c)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	/* XPRESS DDC quirks */
+	if ((rdev->family == CHIP_RS400 ||
+	     rdev->family == CHIP_RS480) &&
+	    ddc_i2c->mask_clk_reg == RADEON_GPIO_CRT2_DDC)
+		*ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_MONID);
+	else if ((rdev->family == CHIP_RS400 ||
+		  rdev->family == CHIP_RS480) &&
+		 ddc_i2c->mask_clk_reg == RADEON_GPIO_MONID) {
+		ddc_i2c->valid = true;
+		ddc_i2c->mask_clk_mask = (0x20 << 8);
+		ddc_i2c->mask_data_mask = 0x80;
+		ddc_i2c->a_clk_mask = (0x20 << 8);
+		ddc_i2c->a_data_mask = 0x80;
+		ddc_i2c->put_clk_mask = (0x20 << 8);
+		ddc_i2c->put_data_mask = 0x80;
+		ddc_i2c->get_clk_mask = (0x20 << 8);
+		ddc_i2c->get_data_mask = 0x80;
+		ddc_i2c->mask_clk_reg = RADEON_GPIOPAD_MASK;
+		ddc_i2c->mask_data_reg = RADEON_GPIOPAD_MASK;
+		ddc_i2c->a_clk_reg = RADEON_GPIOPAD_A;
+		ddc_i2c->a_data_reg = RADEON_GPIOPAD_A;
+		ddc_i2c->put_clk_reg = RADEON_GPIOPAD_EN;
+		ddc_i2c->put_data_reg = RADEON_GPIOPAD_EN;
+		ddc_i2c->get_clk_reg = RADEON_LCD_GPIO_Y_REG;
+		ddc_i2c->get_data_reg = RADEON_LCD_GPIO_Y_REG;
+	}
+
+	/* Certain IBM chipset RN50s have a BIOS reporting two VGAs,
+	   one with VGA DDC and one with CRT2 DDC. - kill the CRT2 DDC one */
+	if (dev->pdev->device == 0x515e &&
+	    dev->pdev->subsystem_vendor == 0x1014) {
+		if (*legacy_connector == CONNECTOR_CRT_LEGACY &&
+		    ddc_i2c->mask_clk_reg == RADEON_GPIO_CRT2_DDC)
+			return false;
+	}
+
+	/* Some RV100 cards with 2 VGA ports show up with DVI+VGA */
+	if (dev->pdev->device == 0x5159 &&
+	    dev->pdev->subsystem_vendor == 0x1002 &&
+	    dev->pdev->subsystem_device == 0x013a) {
+		if (*legacy_connector == CONNECTOR_DVI_I_LEGACY)
+			*legacy_connector = CONNECTOR_CRT_LEGACY;
+
+	}
+
+	/* X300 card with extra non-existent DVI port */
+	if (dev->pdev->device == 0x5B60 &&
+	    dev->pdev->subsystem_vendor == 0x17af &&
+	    dev->pdev->subsystem_device == 0x201e && bios_index == 2) {
+		if (*legacy_connector == CONNECTOR_DVI_I_LEGACY)
+			return false;
+	}
+
+	return true;
+}
+
+bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t conn_info, entry, devices;
+	uint16_t tmp;
+	enum radeon_combios_ddc ddc_type;
+	enum radeon_combios_connector connector;
+	int i = 0;
+	struct radeon_i2c_bus_rec ddc_i2c;
+
+	if (rdev->bios == NULL)
+		return false;
+
+	conn_info = combios_get_table_offset(dev, COMBIOS_CONNECTOR_INFO_TABLE);
+	if (conn_info) {
+		for (i = 0; i < 4; i++) {
+			entry = conn_info + 2 + i * 2;
+
+			if (!RBIOS16(entry))
+				break;
+
+			tmp = RBIOS16(entry);
+
+			connector = (tmp >> 12) & 0xf;
+
+			ddc_type = (tmp >> 8) & 0xf;
+			switch (ddc_type) {
+			case DDC_MONID:
+				ddc_i2c =
+				    combios_setup_i2c_bus(RADEON_GPIO_MONID);
+				break;
+			case DDC_DVI:
+				ddc_i2c =
+				    combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
+				break;
+			case DDC_VGA:
+				ddc_i2c =
+				    combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+				break;
+			case DDC_CRT2:
+				ddc_i2c =
+				    combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC);
+				break;
+			default:
+				break;
+			}
+
+			radeon_apply_legacy_quirks(dev, i, &connector,
+						   &ddc_i2c);
+
+			switch (connector) {
+			case CONNECTOR_PROPRIETARY_LEGACY:
+				if ((tmp >> 4) & 0x1)
+					devices = ATOM_DEVICE_DFP2_SUPPORT;
+				else
+					devices = ATOM_DEVICE_DFP1_SUPPORT;
+				radeon_add_legacy_encoder(dev,
+							  radeon_get_encoder_id
+							  (dev, devices, 0),
+							  devices);
+				radeon_add_legacy_connector(dev, i, devices,
+							    legacy_connector_convert
+							    [connector],
+							    &ddc_i2c);
+				break;
+			case CONNECTOR_CRT_LEGACY:
+				if (tmp & 0x1) {
+					devices = ATOM_DEVICE_CRT2_SUPPORT;
+					radeon_add_legacy_encoder(dev,
+								  radeon_get_encoder_id
+								  (dev,
+								   ATOM_DEVICE_CRT2_SUPPORT,
+								   2),
+								  ATOM_DEVICE_CRT2_SUPPORT);
+				} else {
+					devices = ATOM_DEVICE_CRT1_SUPPORT;
+					radeon_add_legacy_encoder(dev,
+								  radeon_get_encoder_id
+								  (dev,
+								   ATOM_DEVICE_CRT1_SUPPORT,
+								   1),
+								  ATOM_DEVICE_CRT1_SUPPORT);
+				}
+				radeon_add_legacy_connector(dev,
+							    i,
+							    devices,
+							    legacy_connector_convert
+							    [connector],
+							    &ddc_i2c);
+				break;
+			case CONNECTOR_DVI_I_LEGACY:
+				devices = 0;
+				if (tmp & 0x1) {
+					devices |= ATOM_DEVICE_CRT2_SUPPORT;
+					radeon_add_legacy_encoder(dev,
+								  radeon_get_encoder_id
+								  (dev,
+								   ATOM_DEVICE_CRT2_SUPPORT,
+								   2),
+								  ATOM_DEVICE_CRT2_SUPPORT);
+				} else {
+					devices |= ATOM_DEVICE_CRT1_SUPPORT;
+					radeon_add_legacy_encoder(dev,
+								  radeon_get_encoder_id
+								  (dev,
+								   ATOM_DEVICE_CRT1_SUPPORT,
+								   1),
+								  ATOM_DEVICE_CRT1_SUPPORT);
+				}
+				if ((tmp >> 4) & 0x1) {
+					devices |= ATOM_DEVICE_DFP2_SUPPORT;
+					radeon_add_legacy_encoder(dev,
+								  radeon_get_encoder_id
+								  (dev,
+								   ATOM_DEVICE_DFP2_SUPPORT,
+								   0),
+								  ATOM_DEVICE_DFP2_SUPPORT);
+				} else {
+					devices |= ATOM_DEVICE_DFP1_SUPPORT;
+					radeon_add_legacy_encoder(dev,
+								  radeon_get_encoder_id
+								  (dev,
+								   ATOM_DEVICE_DFP1_SUPPORT,
+								   0),
+								  ATOM_DEVICE_DFP1_SUPPORT);
+				}
+				radeon_add_legacy_connector(dev,
+							    i,
+							    devices,
+							    legacy_connector_convert
+							    [connector],
+							    &ddc_i2c);
+				break;
+			case CONNECTOR_DVI_D_LEGACY:
+				if ((tmp >> 4) & 0x1)
+					devices = ATOM_DEVICE_DFP2_SUPPORT;
+				else
+					devices = ATOM_DEVICE_DFP1_SUPPORT;
+				radeon_add_legacy_encoder(dev,
+							  radeon_get_encoder_id
+							  (dev, devices, 0),
+							  devices);
+				radeon_add_legacy_connector(dev, i, devices,
+							    legacy_connector_convert
+							    [connector],
+							    &ddc_i2c);
+				break;
+			case CONNECTOR_CTV_LEGACY:
+			case CONNECTOR_STV_LEGACY:
+				radeon_add_legacy_encoder(dev,
+							  radeon_get_encoder_id
+							  (dev,
+							   ATOM_DEVICE_TV1_SUPPORT,
+							   2),
+							  ATOM_DEVICE_TV1_SUPPORT);
+				radeon_add_legacy_connector(dev, i,
+							    ATOM_DEVICE_TV1_SUPPORT,
+							    legacy_connector_convert
+							    [connector],
+							    &ddc_i2c);
+				break;
+			default:
+				DRM_ERROR("Unknown connector type: %d\n",
+					  connector);
+				continue;
+			}
+
+		}
+	} else {
+		uint16_t tmds_info =
+		    combios_get_table_offset(dev, COMBIOS_DFP_INFO_TABLE);
+		if (tmds_info) {
+			DRM_DEBUG("Found DFP table, assuming DVI connector\n");
+
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_CRT1_SUPPORT,
+									1),
+						  ATOM_DEVICE_CRT1_SUPPORT);
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_DFP1_SUPPORT,
+									0),
+						  ATOM_DEVICE_DFP1_SUPPORT);
+
+			ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
+			radeon_add_legacy_connector(dev,
+						    0,
+						    ATOM_DEVICE_CRT1_SUPPORT |
+						    ATOM_DEVICE_DFP1_SUPPORT,
+						    DRM_MODE_CONNECTOR_DVII,
+						    &ddc_i2c);
+		} else {
+			DRM_DEBUG("No connector info found\n");
+			return false;
+		}
+	}
+
+	if (rdev->flags & RADEON_IS_MOBILITY || rdev->flags & RADEON_IS_IGP) {
+		uint16_t lcd_info =
+		    combios_get_table_offset(dev, COMBIOS_LCD_INFO_TABLE);
+		if (lcd_info) {
+			uint16_t lcd_ddc_info =
+			    combios_get_table_offset(dev,
+						     COMBIOS_LCD_DDC_INFO_TABLE);
+
+			radeon_add_legacy_encoder(dev,
+						  radeon_get_encoder_id(dev,
+									ATOM_DEVICE_LCD1_SUPPORT,
+									0),
+						  ATOM_DEVICE_LCD1_SUPPORT);
+
+			if (lcd_ddc_info) {
+				ddc_type = RBIOS8(lcd_ddc_info + 2);
+				switch (ddc_type) {
+				case DDC_MONID:
+					ddc_i2c =
+					    combios_setup_i2c_bus
+					    (RADEON_GPIO_MONID);
+					break;
+				case DDC_DVI:
+					ddc_i2c =
+					    combios_setup_i2c_bus
+					    (RADEON_GPIO_DVI_DDC);
+					break;
+				case DDC_VGA:
+					ddc_i2c =
+					    combios_setup_i2c_bus
+					    (RADEON_GPIO_VGA_DDC);
+					break;
+				case DDC_CRT2:
+					ddc_i2c =
+					    combios_setup_i2c_bus
+					    (RADEON_GPIO_CRT2_DDC);
+					break;
+				case DDC_LCD:
+					ddc_i2c =
+					    combios_setup_i2c_bus
+					    (RADEON_LCD_GPIO_MASK);
+					ddc_i2c.mask_clk_mask =
+					    RBIOS32(lcd_ddc_info + 3);
+					ddc_i2c.mask_data_mask =
+					    RBIOS32(lcd_ddc_info + 7);
+					ddc_i2c.a_clk_mask =
+					    RBIOS32(lcd_ddc_info + 3);
+					ddc_i2c.a_data_mask =
+					    RBIOS32(lcd_ddc_info + 7);
+					ddc_i2c.put_clk_mask =
+					    RBIOS32(lcd_ddc_info + 3);
+					ddc_i2c.put_data_mask =
+					    RBIOS32(lcd_ddc_info + 7);
+					ddc_i2c.get_clk_mask =
+					    RBIOS32(lcd_ddc_info + 3);
+					ddc_i2c.get_data_mask =
+					    RBIOS32(lcd_ddc_info + 7);
+					break;
+				case DDC_GPIO:
+					ddc_i2c =
+					    combios_setup_i2c_bus
+					    (RADEON_MDGPIO_EN_REG);
+					ddc_i2c.mask_clk_mask =
+					    RBIOS32(lcd_ddc_info + 3);
+					ddc_i2c.mask_data_mask =
+					    RBIOS32(lcd_ddc_info + 7);
+					ddc_i2c.a_clk_mask =
+					    RBIOS32(lcd_ddc_info + 3);
+					ddc_i2c.a_data_mask =
+					    RBIOS32(lcd_ddc_info + 7);
+					ddc_i2c.put_clk_mask =
+					    RBIOS32(lcd_ddc_info + 3);
+					ddc_i2c.put_data_mask =
+					    RBIOS32(lcd_ddc_info + 7);
+					ddc_i2c.get_clk_mask =
+					    RBIOS32(lcd_ddc_info + 3);
+					ddc_i2c.get_data_mask =
+					    RBIOS32(lcd_ddc_info + 7);
+					break;
+				default:
+					ddc_i2c.valid = false;
+					break;
+				}
+				DRM_DEBUG("LCD DDC Info Table found!\n");
+			} else
+				ddc_i2c.valid = false;
+
+			radeon_add_legacy_connector(dev,
+						    5,
+						    ATOM_DEVICE_LCD1_SUPPORT,
+						    DRM_MODE_CONNECTOR_LVDS,
+						    &ddc_i2c);
+		}
+	}
+
+	/* check TV table */
+	if (rdev->family != CHIP_R100 && rdev->family != CHIP_R200) {
+		uint32_t tv_info =
+		    combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
+		if (tv_info) {
+			if (RBIOS8(tv_info + 6) == 'T') {
+				radeon_add_legacy_encoder(dev,
+							  radeon_get_encoder_id
+							  (dev,
+							   ATOM_DEVICE_TV1_SUPPORT,
+							   2),
+							  ATOM_DEVICE_TV1_SUPPORT);
+				radeon_add_legacy_connector(dev, 6,
+							    ATOM_DEVICE_TV1_SUPPORT,
+							    DRM_MODE_CONNECTOR_SVIDEO,
+							    &ddc_i2c);
+			}
+		}
+	}
+
+	radeon_link_encoder_connector(dev);
+
+	return true;
+}
+
+static void combios_parse_mmio_table(struct drm_device *dev, uint16_t offset)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (offset) {
+		while (RBIOS16(offset)) {
+			uint16_t cmd = ((RBIOS16(offset) & 0xe000) >> 13);
+			uint32_t addr = (RBIOS16(offset) & 0x1fff);
+			uint32_t val, and_mask, or_mask;
+			uint32_t tmp;
+
+			offset += 2;
+			switch (cmd) {
+			case 0:
+				val = RBIOS32(offset);
+				offset += 4;
+				WREG32(addr, val);
+				break;
+			case 1:
+				val = RBIOS32(offset);
+				offset += 4;
+				WREG32(addr, val);
+				break;
+			case 2:
+				and_mask = RBIOS32(offset);
+				offset += 4;
+				or_mask = RBIOS32(offset);
+				offset += 4;
+				tmp = RREG32(addr);
+				tmp &= and_mask;
+				tmp |= or_mask;
+				WREG32(addr, tmp);
+				break;
+			case 3:
+				and_mask = RBIOS32(offset);
+				offset += 4;
+				or_mask = RBIOS32(offset);
+				offset += 4;
+				tmp = RREG32(addr);
+				tmp &= and_mask;
+				tmp |= or_mask;
+				WREG32(addr, tmp);
+				break;
+			case 4:
+				val = RBIOS16(offset);
+				offset += 2;
+				udelay(val);
+				break;
+			case 5:
+				val = RBIOS16(offset);
+				offset += 2;
+				switch (addr) {
+				case 8:
+					while (val--) {
+						if (!
+						    (RREG32_PLL
+						     (RADEON_CLK_PWRMGT_CNTL) &
+						     RADEON_MC_BUSY))
+							break;
+					}
+					break;
+				case 9:
+					while (val--) {
+						if ((RREG32(RADEON_MC_STATUS) &
+						     RADEON_MC_IDLE))
+							break;
+					}
+					break;
+				default:
+					break;
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+}
+
+static void combios_parse_pll_table(struct drm_device *dev, uint16_t offset)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (offset) {
+		while (RBIOS8(offset)) {
+			uint8_t cmd = ((RBIOS8(offset) & 0xc0) >> 6);
+			uint8_t addr = (RBIOS8(offset) & 0x3f);
+			uint32_t val, shift, tmp;
+			uint32_t and_mask, or_mask;
+
+			offset++;
+			switch (cmd) {
+			case 0:
+				val = RBIOS32(offset);
+				offset += 4;
+				WREG32_PLL(addr, val);
+				break;
+			case 1:
+				shift = RBIOS8(offset) * 8;
+				offset++;
+				and_mask = RBIOS8(offset) << shift;
+				and_mask |= ~(0xff << shift);
+				offset++;
+				or_mask = RBIOS8(offset) << shift;
+				offset++;
+				tmp = RREG32_PLL(addr);
+				tmp &= and_mask;
+				tmp |= or_mask;
+				WREG32_PLL(addr, tmp);
+				break;
+			case 2:
+			case 3:
+				tmp = 1000;
+				switch (addr) {
+				case 1:
+					udelay(150);
+					break;
+				case 2:
+					udelay(1000);
+					break;
+				case 3:
+					while (tmp--) {
+						if (!
+						    (RREG32_PLL
+						     (RADEON_CLK_PWRMGT_CNTL) &
+						     RADEON_MC_BUSY))
+							break;
+					}
+					break;
+				case 4:
+					while (tmp--) {
+						if (RREG32_PLL
+						    (RADEON_CLK_PWRMGT_CNTL) &
+						    RADEON_DLL_READY)
+							break;
+					}
+					break;
+				case 5:
+					tmp =
+					    RREG32_PLL(RADEON_CLK_PWRMGT_CNTL);
+					if (tmp & RADEON_CG_NO1_DEBUG_0) {
+#if 0
+						uint32_t mclk_cntl =
+						    RREG32_PLL
+						    (RADEON_MCLK_CNTL);
+						mclk_cntl &= 0xffff0000;
+						/*mclk_cntl |= 0x00001111;*//* ??? */
+						WREG32_PLL(RADEON_MCLK_CNTL,
+							   mclk_cntl);
+						udelay(10000);
+#endif
+						WREG32_PLL
+						    (RADEON_CLK_PWRMGT_CNTL,
+						     tmp &
+						     ~RADEON_CG_NO1_DEBUG_0);
+						udelay(10000);
+					}
+					break;
+				default:
+					break;
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+}
+
+static void combios_parse_ram_reset_table(struct drm_device *dev,
+					  uint16_t offset)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t tmp;
+
+	if (offset) {
+		uint8_t val = RBIOS8(offset);
+		while (val != 0xff) {
+			offset++;
+
+			if (val == 0x0f) {
+				uint32_t channel_complete_mask;
+
+				if (ASIC_IS_R300(rdev))
+					channel_complete_mask =
+					    R300_MEM_PWRUP_COMPLETE;
+				else
+					channel_complete_mask =
+					    RADEON_MEM_PWRUP_COMPLETE;
+				tmp = 20000;
+				while (tmp--) {
+					if ((RREG32(RADEON_MEM_STR_CNTL) &
+					     channel_complete_mask) ==
+					    channel_complete_mask)
+						break;
+				}
+			} else {
+				uint32_t or_mask = RBIOS16(offset);
+				offset += 2;
+
+				tmp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
+				tmp &= RADEON_SDRAM_MODE_MASK;
+				tmp |= or_mask;
+				WREG32(RADEON_MEM_SDRAM_MODE_REG, tmp);
+
+				or_mask = val << 24;
+				tmp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
+				tmp &= RADEON_B3MEM_RESET_MASK;
+				tmp |= or_mask;
+				WREG32(RADEON_MEM_SDRAM_MODE_REG, tmp);
+			}
+			val = RBIOS8(offset);
+		}
+	}
+}
+
+static uint32_t combios_detect_ram(struct drm_device *dev, int ram,
+				   int mem_addr_mapping)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t mem_cntl;
+	uint32_t mem_size;
+	uint32_t addr = 0;
+
+	mem_cntl = RREG32(RADEON_MEM_CNTL);
+	if (mem_cntl & RV100_HALF_MODE)
+		ram /= 2;
+	mem_size = ram;
+	mem_cntl &= ~(0xff << 8);
+	mem_cntl |= (mem_addr_mapping & 0xff) << 8;
+	WREG32(RADEON_MEM_CNTL, mem_cntl);
+	RREG32(RADEON_MEM_CNTL);
+
+	/* sdram reset ? */
+
+	/* something like this????  */
+	while (ram--) {
+		addr = ram * 1024 * 1024;
+		/* write to each page */
+		WREG32(RADEON_MM_INDEX, (addr) | RADEON_MM_APER);
+		WREG32(RADEON_MM_DATA, 0xdeadbeef);
+		/* read back and verify */
+		WREG32(RADEON_MM_INDEX, (addr) | RADEON_MM_APER);
+		if (RREG32(RADEON_MM_DATA) != 0xdeadbeef)
+			return 0;
+	}
+
+	return mem_size;
+}
+
+static void combios_write_ram_size(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint8_t rev;
+	uint16_t offset;
+	uint32_t mem_size = 0;
+	uint32_t mem_cntl = 0;
+
+	/* should do something smarter here I guess... */
+	if (rdev->flags & RADEON_IS_IGP)
+		return;
+
+	/* first check detected mem table */
+	offset = combios_get_table_offset(dev, COMBIOS_DETECTED_MEM_TABLE);
+	if (offset) {
+		rev = RBIOS8(offset);
+		if (rev < 3) {
+			mem_cntl = RBIOS32(offset + 1);
+			mem_size = RBIOS16(offset + 5);
+			if (((rdev->flags & RADEON_FAMILY_MASK) < CHIP_R200) &&
+			    ((dev->pdev->device != 0x515e)
+			     && (dev->pdev->device != 0x5969)))
+				WREG32(RADEON_MEM_CNTL, mem_cntl);
+		}
+	}
+
+	if (!mem_size) {
+		offset =
+		    combios_get_table_offset(dev, COMBIOS_MEM_CONFIG_TABLE);
+		if (offset) {
+			rev = RBIOS8(offset - 1);
+			if (rev < 1) {
+				if (((rdev->flags & RADEON_FAMILY_MASK) <
+				     CHIP_R200)
+				    && ((dev->pdev->device != 0x515e)
+					&& (dev->pdev->device != 0x5969))) {
+					int ram = 0;
+					int mem_addr_mapping = 0;
+
+					while (RBIOS8(offset)) {
+						ram = RBIOS8(offset);
+						mem_addr_mapping =
+						    RBIOS8(offset + 1);
+						if (mem_addr_mapping != 0x25)
+							ram *= 2;
+						mem_size =
+						    combios_detect_ram(dev, ram,
+								       mem_addr_mapping);
+						if (mem_size)
+							break;
+						offset += 2;
+					}
+				} else
+					mem_size = RBIOS8(offset);
+			} else {
+				mem_size = RBIOS8(offset);
+				mem_size *= 2;	/* convert to MB */
+			}
+		}
+	}
+
+	mem_size *= (1024 * 1024);	/* convert to bytes */
+	WREG32(RADEON_CONFIG_MEMSIZE, mem_size);
+}
+
+void radeon_combios_dyn_clk_setup(struct drm_device *dev, int enable)
+{
+	uint16_t dyn_clk_info =
+	    combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
+
+	if (dyn_clk_info)
+		combios_parse_pll_table(dev, dyn_clk_info);
+}
+
+void radeon_combios_asic_init(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint16_t table;
+
+	/* port hardcoded mac stuff from radeonfb */
+	if (rdev->bios == NULL)
+		return;
+
+	/* ASIC INIT 1 */
+	table = combios_get_table_offset(dev, COMBIOS_ASIC_INIT_1_TABLE);
+	if (table)
+		combios_parse_mmio_table(dev, table);
+
+	/* PLL INIT */
+	table = combios_get_table_offset(dev, COMBIOS_PLL_INIT_TABLE);
+	if (table)
+		combios_parse_pll_table(dev, table);
+
+	/* ASIC INIT 2 */
+	table = combios_get_table_offset(dev, COMBIOS_ASIC_INIT_2_TABLE);
+	if (table)
+		combios_parse_mmio_table(dev, table);
+
+	if (!(rdev->flags & RADEON_IS_IGP)) {
+		/* ASIC INIT 4 */
+		table =
+		    combios_get_table_offset(dev, COMBIOS_ASIC_INIT_4_TABLE);
+		if (table)
+			combios_parse_mmio_table(dev, table);
+
+		/* RAM RESET */
+		table = combios_get_table_offset(dev, COMBIOS_RAM_RESET_TABLE);
+		if (table)
+			combios_parse_ram_reset_table(dev, table);
+
+		/* ASIC INIT 3 */
+		table =
+		    combios_get_table_offset(dev, COMBIOS_ASIC_INIT_3_TABLE);
+		if (table)
+			combios_parse_mmio_table(dev, table);
+
+		/* write CONFIG_MEMSIZE */
+		combios_write_ram_size(dev);
+	}
+
+	/* DYN CLK 1 */
+	table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
+	if (table)
+		combios_parse_pll_table(dev, table);
+
+}
+
+void radeon_combios_initialize_bios_scratch_regs(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t bios_0_scratch, bios_6_scratch, bios_7_scratch;
+
+	bios_0_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
+	bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
+	bios_7_scratch = RREG32(RADEON_BIOS_7_SCRATCH);
+
+	/* let the bios control the backlight */
+	bios_0_scratch &= ~RADEON_DRIVER_BRIGHTNESS_EN;
+
+	/* tell the bios not to handle mode switching */
+	bios_6_scratch |= (RADEON_DISPLAY_SWITCHING_DIS |
+			   RADEON_ACC_MODE_CHANGE);
+
+	/* tell the bios a driver is loaded */
+	bios_7_scratch |= RADEON_DRV_LOADED;
+
+	WREG32(RADEON_BIOS_0_SCRATCH, bios_0_scratch);
+	WREG32(RADEON_BIOS_6_SCRATCH, bios_6_scratch);
+	WREG32(RADEON_BIOS_7_SCRATCH, bios_7_scratch);
+}
+
+void radeon_combios_output_lock(struct drm_encoder *encoder, bool lock)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t bios_6_scratch;
+
+	bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
+
+	if (lock)
+		bios_6_scratch |= RADEON_DRIVER_CRITICAL;
+	else
+		bios_6_scratch &= ~RADEON_DRIVER_CRITICAL;
+
+	WREG32(RADEON_BIOS_6_SCRATCH, bios_6_scratch);
+}
+
+void
+radeon_combios_connected_scratch_regs(struct drm_connector *connector,
+				      struct drm_encoder *encoder,
+				      bool connected)
+{
+	struct drm_device *dev = connector->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_connector *radeon_connector =
+	    to_radeon_connector(connector);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t bios_4_scratch = RREG32(RADEON_BIOS_4_SCRATCH);
+	uint32_t bios_5_scratch = RREG32(RADEON_BIOS_5_SCRATCH);
+
+	if ((radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("TV1 connected\n");
+			/* fix me */
+			bios_4_scratch |= RADEON_TV1_ATTACHED_SVIDEO;
+			/*save->bios_4_scratch |= RADEON_TV1_ATTACHED_COMP; */
+			bios_5_scratch |= RADEON_TV1_ON;
+			bios_5_scratch |= RADEON_ACC_REQ_TV1;
+		} else {
+			DRM_DEBUG("TV1 disconnected\n");
+			bios_4_scratch &= ~RADEON_TV1_ATTACHED_MASK;
+			bios_5_scratch &= ~RADEON_TV1_ON;
+			bios_5_scratch &= ~RADEON_ACC_REQ_TV1;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_LCD1_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("LCD1 connected\n");
+			bios_4_scratch |= RADEON_LCD1_ATTACHED;
+			bios_5_scratch |= RADEON_LCD1_ON;
+			bios_5_scratch |= RADEON_ACC_REQ_LCD1;
+		} else {
+			DRM_DEBUG("LCD1 disconnected\n");
+			bios_4_scratch &= ~RADEON_LCD1_ATTACHED;
+			bios_5_scratch &= ~RADEON_LCD1_ON;
+			bios_5_scratch &= ~RADEON_ACC_REQ_LCD1;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("CRT1 connected\n");
+			bios_4_scratch |= RADEON_CRT1_ATTACHED_COLOR;
+			bios_5_scratch |= RADEON_CRT1_ON;
+			bios_5_scratch |= RADEON_ACC_REQ_CRT1;
+		} else {
+			DRM_DEBUG("CRT1 disconnected\n");
+			bios_4_scratch &= ~RADEON_CRT1_ATTACHED_MASK;
+			bios_5_scratch &= ~RADEON_CRT1_ON;
+			bios_5_scratch &= ~RADEON_ACC_REQ_CRT1;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("CRT2 connected\n");
+			bios_4_scratch |= RADEON_CRT2_ATTACHED_COLOR;
+			bios_5_scratch |= RADEON_CRT2_ON;
+			bios_5_scratch |= RADEON_ACC_REQ_CRT2;
+		} else {
+			DRM_DEBUG("CRT2 disconnected\n");
+			bios_4_scratch &= ~RADEON_CRT2_ATTACHED_MASK;
+			bios_5_scratch &= ~RADEON_CRT2_ON;
+			bios_5_scratch &= ~RADEON_ACC_REQ_CRT2;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_DFP1_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_DFP1_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("DFP1 connected\n");
+			bios_4_scratch |= RADEON_DFP1_ATTACHED;
+			bios_5_scratch |= RADEON_DFP1_ON;
+			bios_5_scratch |= RADEON_ACC_REQ_DFP1;
+		} else {
+			DRM_DEBUG("DFP1 disconnected\n");
+			bios_4_scratch &= ~RADEON_DFP1_ATTACHED;
+			bios_5_scratch &= ~RADEON_DFP1_ON;
+			bios_5_scratch &= ~RADEON_ACC_REQ_DFP1;
+		}
+	}
+	if ((radeon_encoder->devices & ATOM_DEVICE_DFP2_SUPPORT) &&
+	    (radeon_connector->devices & ATOM_DEVICE_DFP2_SUPPORT)) {
+		if (connected) {
+			DRM_DEBUG("DFP2 connected\n");
+			bios_4_scratch |= RADEON_DFP2_ATTACHED;
+			bios_5_scratch |= RADEON_DFP2_ON;
+			bios_5_scratch |= RADEON_ACC_REQ_DFP2;
+		} else {
+			DRM_DEBUG("DFP2 disconnected\n");
+			bios_4_scratch &= ~RADEON_DFP2_ATTACHED;
+			bios_5_scratch &= ~RADEON_DFP2_ON;
+			bios_5_scratch &= ~RADEON_ACC_REQ_DFP2;
+		}
+	}
+	WREG32(RADEON_BIOS_4_SCRATCH, bios_4_scratch);
+	WREG32(RADEON_BIOS_5_SCRATCH, bios_5_scratch);
+}
+
+void
+radeon_combios_encoder_crtc_scratch_regs(struct drm_encoder *encoder, int crtc)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t bios_5_scratch = RREG32(RADEON_BIOS_5_SCRATCH);
+
+	if (radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) {
+		bios_5_scratch &= ~RADEON_TV1_CRTC_MASK;
+		bios_5_scratch |= (crtc << RADEON_TV1_CRTC_SHIFT);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+		bios_5_scratch &= ~RADEON_CRT1_CRTC_MASK;
+		bios_5_scratch |= (crtc << RADEON_CRT1_CRTC_SHIFT);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+		bios_5_scratch &= ~RADEON_CRT2_CRTC_MASK;
+		bios_5_scratch |= (crtc << RADEON_CRT2_CRTC_SHIFT);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) {
+		bios_5_scratch &= ~RADEON_LCD1_CRTC_MASK;
+		bios_5_scratch |= (crtc << RADEON_LCD1_CRTC_SHIFT);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP1_SUPPORT) {
+		bios_5_scratch &= ~RADEON_DFP1_CRTC_MASK;
+		bios_5_scratch |= (crtc << RADEON_DFP1_CRTC_SHIFT);
+	}
+	if (radeon_encoder->devices & ATOM_DEVICE_DFP2_SUPPORT) {
+		bios_5_scratch &= ~RADEON_DFP2_CRTC_MASK;
+		bios_5_scratch |= (crtc << RADEON_DFP2_CRTC_SHIFT);
+	}
+	WREG32(RADEON_BIOS_5_SCRATCH, bios_5_scratch);
+}
+
+void
+radeon_combios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
+
+	if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) {
+		if (on)
+			bios_6_scratch |= RADEON_TV_DPMS_ON;
+		else
+			bios_6_scratch &= ~RADEON_TV_DPMS_ON;
+	}
+	if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT)) {
+		if (on)
+			bios_6_scratch |= RADEON_CRT_DPMS_ON;
+		else
+			bios_6_scratch &= ~RADEON_CRT_DPMS_ON;
+	}
+	if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+		if (on)
+			bios_6_scratch |= RADEON_LCD_DPMS_ON;
+		else
+			bios_6_scratch &= ~RADEON_LCD_DPMS_ON;
+	}
+	if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+		if (on)
+			bios_6_scratch |= RADEON_DFP_DPMS_ON;
+		else
+			bios_6_scratch &= ~RADEON_DFP_DPMS_ON;
+	}
+	WREG32(RADEON_BIOS_6_SCRATCH, bios_6_scratch);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
new file mode 100644
index 00000000000..70ede6a52d4
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -0,0 +1,603 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "drm_edid.h"
+#include "drm_crtc_helper.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+
+extern void
+radeon_combios_connected_scratch_regs(struct drm_connector *connector,
+				      struct drm_encoder *encoder,
+				      bool connected);
+extern void
+radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
+				       struct drm_encoder *encoder,
+				       bool connected);
+
+static void
+radeon_connector_update_scratch_regs(struct drm_connector *connector, enum drm_connector_status status)
+{
+	struct drm_device *dev = connector->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_encoder *best_encoder = NULL;
+	struct drm_encoder *encoder = NULL;
+	struct drm_connector_helper_funcs *connector_funcs = connector->helper_private;
+	struct drm_mode_object *obj;
+	bool connected;
+	int i;
+
+	best_encoder = connector_funcs->best_encoder(connector);
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] == 0)
+			break;
+
+		obj = drm_mode_object_find(connector->dev,
+					   connector->encoder_ids[i],
+					   DRM_MODE_OBJECT_ENCODER);
+		if (!obj)
+			continue;
+
+		encoder = obj_to_encoder(obj);
+
+		if ((encoder == best_encoder) && (status == connector_status_connected))
+			connected = true;
+		else
+			connected = false;
+
+		if (rdev->is_atom_bios)
+			radeon_atombios_connected_scratch_regs(connector, encoder, connected);
+		else
+			radeon_combios_connected_scratch_regs(connector, encoder, connected);
+
+	}
+}
+
+struct drm_encoder *radeon_best_single_encoder(struct drm_connector *connector)
+{
+	int enc_id = connector->encoder_ids[0];
+	struct drm_mode_object *obj;
+	struct drm_encoder *encoder;
+
+	/* pick the encoder ids */
+	if (enc_id) {
+		obj = drm_mode_object_find(connector->dev, enc_id, DRM_MODE_OBJECT_ENCODER);
+		if (!obj)
+			return NULL;
+		encoder = obj_to_encoder(obj);
+		return encoder;
+	}
+	return NULL;
+}
+
+static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_display_mode *mode = NULL;
+	struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
+
+	if (native_mode->panel_xres != 0 &&
+	    native_mode->panel_yres != 0 &&
+	    native_mode->dotclock != 0) {
+		mode = drm_mode_create(dev);
+
+		mode->hdisplay = native_mode->panel_xres;
+		mode->vdisplay = native_mode->panel_yres;
+
+		mode->htotal = mode->hdisplay + native_mode->hblank;
+		mode->hsync_start = mode->hdisplay + native_mode->hoverplus;
+		mode->hsync_end = mode->hsync_start + native_mode->hsync_width;
+		mode->vtotal = mode->vdisplay + native_mode->vblank;
+		mode->vsync_start = mode->vdisplay + native_mode->voverplus;
+		mode->vsync_end = mode->vsync_start + native_mode->vsync_width;
+		mode->clock = native_mode->dotclock;
+		mode->flags = 0;
+
+		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
+		drm_mode_set_name(mode);
+
+		DRM_DEBUG("Adding native panel mode %s\n", mode->name);
+	}
+	return mode;
+}
+
+int radeon_connector_set_property(struct drm_connector *connector, struct drm_property *property,
+				  uint64_t val)
+{
+	return 0;
+}
+
+
+static int radeon_lvds_get_modes(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct drm_encoder *encoder;
+	int ret = 0;
+	struct drm_display_mode *mode;
+
+	if (radeon_connector->ddc_bus) {
+		ret = radeon_ddc_get_modes(radeon_connector);
+		if (ret > 0) {
+			return ret;
+		}
+	}
+
+	encoder = radeon_best_single_encoder(connector);
+	if (!encoder)
+		return 0;
+
+	/* we have no EDID modes */
+	mode = radeon_fp_native_mode(encoder);
+	if (mode) {
+		ret = 1;
+		drm_mode_probed_add(connector, mode);
+	}
+	return ret;
+}
+
+static int radeon_lvds_mode_valid(struct drm_connector *connector,
+				  struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector)
+{
+	enum drm_connector_status ret = connector_status_connected;
+	/* check acpi lid status ??? */
+	radeon_connector_update_scratch_regs(connector, ret);
+	return ret;
+}
+
+static void radeon_connector_destroy(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+
+	if (radeon_connector->ddc_bus)
+		radeon_i2c_destroy(radeon_connector->ddc_bus);
+	kfree(radeon_connector->con_priv);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+struct drm_connector_helper_funcs radeon_lvds_connector_helper_funcs = {
+	.get_modes = radeon_lvds_get_modes,
+	.mode_valid = radeon_lvds_mode_valid,
+	.best_encoder = radeon_best_single_encoder,
+};
+
+struct drm_connector_funcs radeon_lvds_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = radeon_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = radeon_connector_destroy,
+	.set_property = radeon_connector_set_property,
+};
+
+static int radeon_vga_get_modes(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	int ret;
+
+	ret = radeon_ddc_get_modes(radeon_connector);
+
+	return ret;
+}
+
+static int radeon_vga_mode_valid(struct drm_connector *connector,
+				  struct drm_display_mode *mode)
+{
+
+	return MODE_OK;
+}
+
+static enum drm_connector_status radeon_vga_detect(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct drm_encoder *encoder;
+	struct drm_encoder_helper_funcs *encoder_funcs;
+	bool dret;
+	enum drm_connector_status ret = connector_status_disconnected;
+
+	radeon_i2c_do_lock(radeon_connector, 1);
+	dret = radeon_ddc_probe(radeon_connector);
+	radeon_i2c_do_lock(radeon_connector, 0);
+	if (dret)
+		ret = connector_status_connected;
+	else {
+		/* if EDID fails to a load detect */
+		encoder = radeon_best_single_encoder(connector);
+		if (!encoder)
+			ret = connector_status_disconnected;
+		else {
+			encoder_funcs = encoder->helper_private;
+			ret = encoder_funcs->detect(encoder, connector);
+		}
+	}
+
+	radeon_connector_update_scratch_regs(connector, ret);
+	return ret;
+}
+
+struct drm_connector_helper_funcs radeon_vga_connector_helper_funcs = {
+	.get_modes = radeon_vga_get_modes,
+	.mode_valid = radeon_vga_mode_valid,
+	.best_encoder = radeon_best_single_encoder,
+};
+
+struct drm_connector_funcs radeon_vga_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = radeon_vga_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = radeon_connector_destroy,
+	.set_property = radeon_connector_set_property,
+};
+
+static int radeon_dvi_get_modes(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	int ret;
+
+	ret = radeon_ddc_get_modes(radeon_connector);
+	/* reset scratch regs here since radeon_dvi_detect doesn't check digital bit */
+	radeon_connector_update_scratch_regs(connector, connector_status_connected);
+	return ret;
+}
+
+static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct drm_encoder *encoder;
+	struct drm_encoder_helper_funcs *encoder_funcs;
+	struct drm_mode_object *obj;
+	int i;
+	enum drm_connector_status ret = connector_status_disconnected;
+	bool dret;
+
+	radeon_i2c_do_lock(radeon_connector, 1);
+	dret = radeon_ddc_probe(radeon_connector);
+	radeon_i2c_do_lock(radeon_connector, 0);
+	if (dret)
+		ret = connector_status_connected;
+	else {
+		for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+			if (connector->encoder_ids[i] == 0)
+				break;
+
+			obj = drm_mode_object_find(connector->dev,
+						   connector->encoder_ids[i],
+						   DRM_MODE_OBJECT_ENCODER);
+			if (!obj)
+				continue;
+
+			encoder = obj_to_encoder(obj);
+
+			encoder_funcs = encoder->helper_private;
+			if (encoder_funcs->detect) {
+				ret = encoder_funcs->detect(encoder, connector);
+				if (ret == connector_status_connected) {
+					radeon_connector->use_digital = 0;
+					break;
+				}
+			}
+		}
+	}
+
+	/* updated in get modes as well since we need to know if it's analog or digital */
+	radeon_connector_update_scratch_regs(connector, ret);
+	return ret;
+}
+
+/* okay need to be smart in here about which encoder to pick */
+struct drm_encoder *radeon_dvi_encoder(struct drm_connector *connector)
+{
+	int enc_id = connector->encoder_ids[0];
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct drm_mode_object *obj;
+	struct drm_encoder *encoder;
+	int i;
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] == 0)
+			break;
+
+		obj = drm_mode_object_find(connector->dev, connector->encoder_ids[i], DRM_MODE_OBJECT_ENCODER);
+		if (!obj)
+			continue;
+
+		encoder = obj_to_encoder(obj);
+
+		if (radeon_connector->use_digital) {
+			if (encoder->encoder_type == DRM_MODE_ENCODER_TMDS)
+				return encoder;
+		} else {
+			if (encoder->encoder_type == DRM_MODE_ENCODER_DAC ||
+			    encoder->encoder_type == DRM_MODE_ENCODER_TVDAC)
+				return encoder;
+		}
+	}
+
+	/* see if we have a default encoder  TODO */
+
+	/* then check use digitial */
+	/* pick the first one */
+	if (enc_id) {
+		obj = drm_mode_object_find(connector->dev, enc_id, DRM_MODE_OBJECT_ENCODER);
+		if (!obj)
+			return NULL;
+		encoder = obj_to_encoder(obj);
+		return encoder;
+	}
+	return NULL;
+}
+
+struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = {
+	.get_modes = radeon_dvi_get_modes,
+	.mode_valid = radeon_vga_mode_valid,
+	.best_encoder = radeon_dvi_encoder,
+};
+
+struct drm_connector_funcs radeon_dvi_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = radeon_dvi_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = radeon_connector_set_property,
+	.destroy = radeon_connector_destroy,
+};
+
+void
+radeon_add_atom_connector(struct drm_device *dev,
+			  uint32_t connector_id,
+			  uint32_t supported_device,
+			  int connector_type,
+			  struct radeon_i2c_bus_rec *i2c_bus,
+			  bool linkb,
+			  uint32_t igp_lane_info)
+{
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+	struct radeon_connector_atom_dig *radeon_dig_connector;
+	uint32_t subpixel_order = SubPixelNone;
+
+	/* fixme - tv/cv/din */
+	if ((connector_type == DRM_MODE_CONNECTOR_Unknown) ||
+	    (connector_type == DRM_MODE_CONNECTOR_SVIDEO) ||
+	    (connector_type == DRM_MODE_CONNECTOR_Composite) ||
+	    (connector_type == DRM_MODE_CONNECTOR_9PinDIN))
+		return;
+
+	/* see if we already added it */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		radeon_connector = to_radeon_connector(connector);
+		if (radeon_connector->connector_id == connector_id) {
+			radeon_connector->devices |= supported_device;
+			return;
+		}
+	}
+
+	radeon_connector = kzalloc(sizeof(struct radeon_connector), GFP_KERNEL);
+	if (!radeon_connector)
+		return;
+
+	connector = &radeon_connector->base;
+
+	radeon_connector->connector_id = connector_id;
+	radeon_connector->devices = supported_device;
+	switch (connector_type) {
+	case DRM_MODE_CONNECTOR_VGA:
+		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		break;
+	case DRM_MODE_CONNECTOR_DVIA:
+		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		break;
+	case DRM_MODE_CONNECTOR_DVII:
+	case DRM_MODE_CONNECTOR_DVID:
+		radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
+		if (!radeon_dig_connector)
+			goto failed;
+		radeon_dig_connector->linkb = linkb;
+		radeon_dig_connector->igp_lane_info = igp_lane_info;
+		radeon_connector->con_priv = radeon_dig_connector;
+		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		subpixel_order = SubPixelHorizontalRGB;
+		break;
+	case DRM_MODE_CONNECTOR_HDMIA:
+	case DRM_MODE_CONNECTOR_HDMIB:
+		radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
+		if (!radeon_dig_connector)
+			goto failed;
+		radeon_dig_connector->linkb = linkb;
+		radeon_dig_connector->igp_lane_info = igp_lane_info;
+		radeon_connector->con_priv = radeon_dig_connector;
+		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "HDMI");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		subpixel_order = SubPixelHorizontalRGB;
+		break;
+	case DRM_MODE_CONNECTOR_DisplayPort:
+		radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
+		if (!radeon_dig_connector)
+			goto failed;
+		radeon_dig_connector->linkb = linkb;
+		radeon_dig_connector->igp_lane_info = igp_lane_info;
+		radeon_connector->con_priv = radeon_dig_connector;
+		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		subpixel_order = SubPixelHorizontalRGB;
+		break;
+	case DRM_MODE_CONNECTOR_SVIDEO:
+	case DRM_MODE_CONNECTOR_Composite:
+	case DRM_MODE_CONNECTOR_9PinDIN:
+		break;
+	case DRM_MODE_CONNECTOR_LVDS:
+		radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
+		if (!radeon_dig_connector)
+			goto failed;
+		radeon_dig_connector->linkb = linkb;
+		radeon_dig_connector->igp_lane_info = igp_lane_info;
+		radeon_connector->con_priv = radeon_dig_connector;
+		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		subpixel_order = SubPixelHorizontalRGB;
+		break;
+	}
+
+	connector->display_info.subpixel_order = subpixel_order;
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed:
+	if (radeon_connector->ddc_bus)
+		radeon_i2c_destroy(radeon_connector->ddc_bus);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+void
+radeon_add_legacy_connector(struct drm_device *dev,
+			    uint32_t connector_id,
+			    uint32_t supported_device,
+			    int connector_type,
+			    struct radeon_i2c_bus_rec *i2c_bus)
+{
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+	uint32_t subpixel_order = SubPixelNone;
+
+	/* fixme - tv/cv/din */
+	if ((connector_type == DRM_MODE_CONNECTOR_Unknown) ||
+	    (connector_type == DRM_MODE_CONNECTOR_SVIDEO) ||
+	    (connector_type == DRM_MODE_CONNECTOR_Composite) ||
+	    (connector_type == DRM_MODE_CONNECTOR_9PinDIN))
+		return;
+
+	/* see if we already added it */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		radeon_connector = to_radeon_connector(connector);
+		if (radeon_connector->connector_id == connector_id) {
+			radeon_connector->devices |= supported_device;
+			return;
+		}
+	}
+
+	radeon_connector = kzalloc(sizeof(struct radeon_connector), GFP_KERNEL);
+	if (!radeon_connector)
+		return;
+
+	connector = &radeon_connector->base;
+
+	radeon_connector->connector_id = connector_id;
+	radeon_connector->devices = supported_device;
+	switch (connector_type) {
+	case DRM_MODE_CONNECTOR_VGA:
+		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		break;
+	case DRM_MODE_CONNECTOR_DVIA:
+		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		break;
+	case DRM_MODE_CONNECTOR_DVII:
+	case DRM_MODE_CONNECTOR_DVID:
+		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		subpixel_order = SubPixelHorizontalRGB;
+		break;
+	case DRM_MODE_CONNECTOR_SVIDEO:
+	case DRM_MODE_CONNECTOR_Composite:
+	case DRM_MODE_CONNECTOR_9PinDIN:
+		break;
+	case DRM_MODE_CONNECTOR_LVDS:
+		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
+		drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		if (i2c_bus->valid) {
+			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
+			if (!radeon_connector->ddc_bus)
+				goto failed;
+		}
+		subpixel_order = SubPixelHorizontalRGB;
+		break;
+	}
+
+	connector->display_info.subpixel_order = subpixel_order;
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed:
+	if (radeon_connector->ddc_bus)
+		radeon_i2c_destroy(radeon_connector->ddc_bus);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
new file mode 100644
index 00000000000..b843f9bdfb1
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright 2008 Jerome Glisse.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Jerome Glisse <glisse@freedesktop.org>
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+void r100_cs_dump_packet(struct radeon_cs_parser *p,
+			 struct radeon_cs_packet *pkt);
+
+int radeon_cs_parser_relocs(struct radeon_cs_parser *p)
+{
+	struct drm_device *ddev = p->rdev->ddev;
+	struct radeon_cs_chunk *chunk;
+	unsigned i, j;
+	bool duplicate;
+
+	if (p->chunk_relocs_idx == -1) {
+		return 0;
+	}
+	chunk = &p->chunks[p->chunk_relocs_idx];
+	/* FIXME: we assume that each relocs use 4 dwords */
+	p->nrelocs = chunk->length_dw / 4;
+	p->relocs_ptr = kcalloc(p->nrelocs, sizeof(void *), GFP_KERNEL);
+	if (p->relocs_ptr == NULL) {
+		return -ENOMEM;
+	}
+	p->relocs = kcalloc(p->nrelocs, sizeof(struct radeon_cs_reloc), GFP_KERNEL);
+	if (p->relocs == NULL) {
+		return -ENOMEM;
+	}
+	for (i = 0; i < p->nrelocs; i++) {
+		struct drm_radeon_cs_reloc *r;
+
+		duplicate = false;
+		r = (struct drm_radeon_cs_reloc *)&chunk->kdata[i*4];
+		for (j = 0; j < p->nrelocs; j++) {
+			if (r->handle == p->relocs[j].handle) {
+				p->relocs_ptr[i] = &p->relocs[j];
+				duplicate = true;
+				break;
+			}
+		}
+		if (!duplicate) {
+			p->relocs[i].gobj = drm_gem_object_lookup(ddev,
+								  p->filp,
+								  r->handle);
+			if (p->relocs[i].gobj == NULL) {
+				DRM_ERROR("gem object lookup failed 0x%x\n",
+					  r->handle);
+				return -EINVAL;
+			}
+			p->relocs_ptr[i] = &p->relocs[i];
+			p->relocs[i].robj = p->relocs[i].gobj->driver_private;
+			p->relocs[i].lobj.robj = p->relocs[i].robj;
+			p->relocs[i].lobj.rdomain = r->read_domains;
+			p->relocs[i].lobj.wdomain = r->write_domain;
+			p->relocs[i].handle = r->handle;
+			p->relocs[i].flags = r->flags;
+			INIT_LIST_HEAD(&p->relocs[i].lobj.list);
+			radeon_object_list_add_object(&p->relocs[i].lobj,
+						      &p->validated);
+		}
+	}
+	return radeon_object_list_validate(&p->validated, p->ib->fence);
+}
+
+int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
+{
+	struct drm_radeon_cs *cs = data;
+	uint64_t *chunk_array_ptr;
+	unsigned size, i;
+
+	if (!cs->num_chunks) {
+		return 0;
+	}
+	/* get chunks */
+	INIT_LIST_HEAD(&p->validated);
+	p->idx = 0;
+	p->chunk_ib_idx = -1;
+	p->chunk_relocs_idx = -1;
+	p->chunks_array = kcalloc(cs->num_chunks, sizeof(uint64_t), GFP_KERNEL);
+	if (p->chunks_array == NULL) {
+		return -ENOMEM;
+	}
+	chunk_array_ptr = (uint64_t *)(unsigned long)(cs->chunks);
+	if (DRM_COPY_FROM_USER(p->chunks_array, chunk_array_ptr,
+			       sizeof(uint64_t)*cs->num_chunks)) {
+		return -EFAULT;
+	}
+	p->nchunks = cs->num_chunks;
+	p->chunks = kcalloc(p->nchunks, sizeof(struct radeon_cs_chunk), GFP_KERNEL);
+	if (p->chunks == NULL) {
+		return -ENOMEM;
+	}
+	for (i = 0; i < p->nchunks; i++) {
+		struct drm_radeon_cs_chunk __user **chunk_ptr = NULL;
+		struct drm_radeon_cs_chunk user_chunk;
+		uint32_t __user *cdata;
+
+		chunk_ptr = (void __user*)(unsigned long)p->chunks_array[i];
+		if (DRM_COPY_FROM_USER(&user_chunk, chunk_ptr,
+				       sizeof(struct drm_radeon_cs_chunk))) {
+			return -EFAULT;
+		}
+		p->chunks[i].chunk_id = user_chunk.chunk_id;
+		if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_RELOCS) {
+			p->chunk_relocs_idx = i;
+		}
+		if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_IB) {
+			p->chunk_ib_idx = i;
+		}
+		p->chunks[i].length_dw = user_chunk.length_dw;
+		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+
+		p->chunks[i].kdata = NULL;
+		size = p->chunks[i].length_dw * sizeof(uint32_t);
+		p->chunks[i].kdata = kzalloc(size, GFP_KERNEL);
+		if (p->chunks[i].kdata == NULL) {
+			return -ENOMEM;
+		}
+		if (DRM_COPY_FROM_USER(p->chunks[i].kdata, cdata, size)) {
+			return -EFAULT;
+		}
+	}
+	if (p->chunks[p->chunk_ib_idx].length_dw > (16 * 1024)) {
+		DRM_ERROR("cs IB too big: %d\n",
+			  p->chunks[p->chunk_ib_idx].length_dw);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * cs_parser_fini() - clean parser states
+ * @parser:	parser structure holding parsing context.
+ * @error:	error number
+ *
+ * If error is set than unvalidate buffer, otherwise just free memory
+ * used by parsing context.
+ **/
+static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error)
+{
+	unsigned i;
+
+	if (error) {
+		radeon_object_list_unvalidate(&parser->validated);
+	} else {
+		radeon_object_list_clean(&parser->validated);
+	}
+	for (i = 0; i < parser->nrelocs; i++) {
+		if (parser->relocs[i].gobj) {
+			mutex_lock(&parser->rdev->ddev->struct_mutex);
+			drm_gem_object_unreference(parser->relocs[i].gobj);
+			mutex_unlock(&parser->rdev->ddev->struct_mutex);
+		}
+	}
+	kfree(parser->relocs);
+	kfree(parser->relocs_ptr);
+	for (i = 0; i < parser->nchunks; i++) {
+		kfree(parser->chunks[i].kdata);
+	}
+	kfree(parser->chunks);
+	kfree(parser->chunks_array);
+	radeon_ib_free(parser->rdev, &parser->ib);
+}
+
+int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_cs_parser parser;
+	struct radeon_cs_chunk *ib_chunk;
+	int r;
+
+	mutex_lock(&rdev->cs_mutex);
+	if (rdev->gpu_lockup) {
+		mutex_unlock(&rdev->cs_mutex);
+		return -EINVAL;
+	}
+	/* initialize parser */
+	memset(&parser, 0, sizeof(struct radeon_cs_parser));
+	parser.filp = filp;
+	parser.rdev = rdev;
+	r = radeon_cs_parser_init(&parser, data);
+	if (r) {
+		DRM_ERROR("Failed to initialize parser !\n");
+		radeon_cs_parser_fini(&parser, r);
+		mutex_unlock(&rdev->cs_mutex);
+		return r;
+	}
+	r =  radeon_ib_get(rdev, &parser.ib);
+	if (r) {
+		DRM_ERROR("Failed to get ib !\n");
+		radeon_cs_parser_fini(&parser, r);
+		mutex_unlock(&rdev->cs_mutex);
+		return r;
+	}
+	r = radeon_cs_parser_relocs(&parser);
+	if (r) {
+		DRM_ERROR("Failed to parse relocation !\n");
+		radeon_cs_parser_fini(&parser, r);
+		mutex_unlock(&rdev->cs_mutex);
+		return r;
+	}
+	/* Copy the packet into the IB, the parser will read from the
+	 * input memory (cached) and write to the IB (which can be
+	 * uncached). */
+	ib_chunk = &parser.chunks[parser.chunk_ib_idx];
+	parser.ib->length_dw = ib_chunk->length_dw;
+	memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
+	r = radeon_cs_parse(&parser);
+	if (r) {
+		DRM_ERROR("Invalid command stream !\n");
+		radeon_cs_parser_fini(&parser, r);
+		mutex_unlock(&rdev->cs_mutex);
+		return r;
+	}
+	r = radeon_ib_schedule(rdev, parser.ib);
+	if (r) {
+		DRM_ERROR("Faild to schedule IB !\n");
+	}
+	radeon_cs_parser_fini(&parser, r);
+	mutex_unlock(&rdev->cs_mutex);
+	return r;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
new file mode 100644
index 00000000000..5232441f119
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+
+#define CURSOR_WIDTH 64
+#define CURSOR_HEIGHT 64
+
+static void radeon_lock_cursor(struct drm_crtc *crtc, bool lock)
+{
+	struct radeon_device *rdev = crtc->dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	uint32_t cur_lock;
+
+	if (ASIC_IS_AVIVO(rdev)) {
+		cur_lock = RREG32(AVIVO_D1CUR_UPDATE + radeon_crtc->crtc_offset);
+		if (lock)
+			cur_lock |= AVIVO_D1CURSOR_UPDATE_LOCK;
+		else
+			cur_lock &= ~AVIVO_D1CURSOR_UPDATE_LOCK;
+		WREG32(AVIVO_D1CUR_UPDATE + radeon_crtc->crtc_offset, cur_lock);
+	} else {
+		cur_lock = RREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset);
+		if (lock)
+			cur_lock |= RADEON_CUR_LOCK;
+		else
+			cur_lock &= ~RADEON_CUR_LOCK;
+		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, cur_lock);
+	}
+}
+
+static void radeon_hide_cursor(struct drm_crtc *crtc)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct radeon_device *rdev = crtc->dev->dev_private;
+
+	if (ASIC_IS_AVIVO(rdev)) {
+		WREG32(RADEON_MM_INDEX, AVIVO_D1CUR_CONTROL + radeon_crtc->crtc_offset);
+		WREG32(RADEON_MM_DATA, (AVIVO_D1CURSOR_MODE_24BPP << AVIVO_D1CURSOR_MODE_SHIFT));
+	} else {
+		switch (radeon_crtc->crtc_id) {
+		case 0:
+			WREG32(RADEON_MM_INDEX, RADEON_CRTC_GEN_CNTL);
+			break;
+		case 1:
+			WREG32(RADEON_MM_INDEX, RADEON_CRTC2_GEN_CNTL);
+			break;
+		default:
+			return;
+		}
+		WREG32_P(RADEON_MM_DATA, 0, ~RADEON_CRTC_CUR_EN);
+	}
+}
+
+static void radeon_show_cursor(struct drm_crtc *crtc)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct radeon_device *rdev = crtc->dev->dev_private;
+
+	if (ASIC_IS_AVIVO(rdev)) {
+		WREG32(RADEON_MM_INDEX, AVIVO_D1CUR_CONTROL + radeon_crtc->crtc_offset);
+		WREG32(RADEON_MM_DATA, AVIVO_D1CURSOR_EN |
+			     (AVIVO_D1CURSOR_MODE_24BPP << AVIVO_D1CURSOR_MODE_SHIFT));
+	} else {
+		switch (radeon_crtc->crtc_id) {
+		case 0:
+			WREG32(RADEON_MM_INDEX, RADEON_CRTC_GEN_CNTL);
+			break;
+		case 1:
+			WREG32(RADEON_MM_INDEX, RADEON_CRTC2_GEN_CNTL);
+			break;
+		default:
+			return;
+		}
+
+		WREG32_P(RADEON_MM_DATA, (RADEON_CRTC_CUR_EN |
+					  (RADEON_CRTC_CUR_MODE_24BPP << RADEON_CRTC_CUR_MODE_SHIFT)),
+			 ~(RADEON_CRTC_CUR_EN | RADEON_CRTC_CUR_MODE_MASK));
+	}
+}
+
+static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj,
+			      uint32_t gpu_addr)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct radeon_device *rdev = crtc->dev->dev_private;
+
+	if (ASIC_IS_AVIVO(rdev))
+		WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr);
+	else
+		/* offset is from DISP(2)_BASE_ADDRESS */
+		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, gpu_addr);
+}
+
+int radeon_crtc_cursor_set(struct drm_crtc *crtc,
+			   struct drm_file *file_priv,
+			   uint32_t handle,
+			   uint32_t width,
+			   uint32_t height)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_gem_object *obj;
+	uint64_t gpu_addr;
+	int ret;
+
+	if (!handle) {
+		/* turn off cursor */
+		radeon_hide_cursor(crtc);
+		obj = NULL;
+		goto unpin;
+	}
+
+	if ((width > CURSOR_WIDTH) || (height > CURSOR_HEIGHT)) {
+		DRM_ERROR("bad cursor width or height %d x %d\n", width, height);
+		return -EINVAL;
+	}
+
+	radeon_crtc->cursor_width = width;
+	radeon_crtc->cursor_height = height;
+
+	obj = drm_gem_object_lookup(crtc->dev, file_priv, handle);
+	if (!obj) {
+		DRM_ERROR("Cannot find cursor object %x for crtc %d\n", handle, radeon_crtc->crtc_id);
+		return -EINVAL;
+	}
+
+	ret = radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &gpu_addr);
+	if (ret)
+		goto fail;
+
+	radeon_lock_cursor(crtc, true);
+	/* XXX only 27 bit offset for legacy cursor */
+	radeon_set_cursor(crtc, obj, gpu_addr);
+	radeon_show_cursor(crtc);
+	radeon_lock_cursor(crtc, false);
+
+unpin:
+	if (radeon_crtc->cursor_bo) {
+		radeon_gem_object_unpin(radeon_crtc->cursor_bo);
+		mutex_lock(&crtc->dev->struct_mutex);
+		drm_gem_object_unreference(radeon_crtc->cursor_bo);
+		mutex_unlock(&crtc->dev->struct_mutex);
+	}
+
+	radeon_crtc->cursor_bo = obj;
+	return 0;
+fail:
+	mutex_lock(&crtc->dev->struct_mutex);
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&crtc->dev->struct_mutex);
+
+	return 0;
+}
+
+int radeon_crtc_cursor_move(struct drm_crtc *crtc,
+			    int x, int y)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct radeon_device *rdev = crtc->dev->dev_private;
+	int xorigin = 0, yorigin = 0;
+
+	if (x < 0)
+		xorigin = -x + 1;
+	if (y < 0)
+		yorigin = -y + 1;
+	if (xorigin >= CURSOR_WIDTH)
+		xorigin = CURSOR_WIDTH - 1;
+	if (yorigin >= CURSOR_HEIGHT)
+		yorigin = CURSOR_HEIGHT - 1;
+
+	radeon_lock_cursor(crtc, true);
+	if (ASIC_IS_AVIVO(rdev)) {
+		int w = radeon_crtc->cursor_width;
+		int i = 0;
+		struct drm_crtc *crtc_p;
+
+		/* avivo cursor are offset into the total surface */
+		x += crtc->x;
+		y += crtc->y;
+		DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
+
+		/* avivo cursor image can't end on 128 pixel boundry or
+		 * go past the end of the frame if both crtcs are enabled
+		 */
+		list_for_each_entry(crtc_p, &crtc->dev->mode_config.crtc_list, head) {
+			if (crtc_p->enabled)
+				i++;
+		}
+		if (i > 1) {
+			int cursor_end, frame_end;
+
+			cursor_end = x - xorigin + w;
+			frame_end = crtc->x + crtc->mode.crtc_hdisplay;
+			if (cursor_end >= frame_end) {
+				w = w - (cursor_end - frame_end);
+				if (!(frame_end & 0x7f))
+					w--;
+			} else {
+				if (!(cursor_end & 0x7f))
+					w--;
+			}
+			if (w <= 0)
+				w = 1;
+		}
+
+		WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset,
+			     ((xorigin ? 0 : x) << 16) |
+			     (yorigin ? 0 : y));
+		WREG32(AVIVO_D1CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
+		WREG32(AVIVO_D1CUR_SIZE + radeon_crtc->crtc_offset,
+		       ((w - 1) << 16) | (radeon_crtc->cursor_height - 1));
+	} else {
+		if (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)
+			y *= 2;
+
+		WREG32(RADEON_CUR_HORZ_VERT_OFF + radeon_crtc->crtc_offset,
+		       (RADEON_CUR_LOCK
+			| (xorigin << 16)
+			| yorigin));
+		WREG32(RADEON_CUR_HORZ_VERT_POSN + radeon_crtc->crtc_offset,
+		       (RADEON_CUR_LOCK
+			| ((xorigin ? 0 : x) << 16)
+			| (yorigin ? 0 : y)));
+	}
+	radeon_lock_cursor(crtc, false);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
new file mode 100644
index 00000000000..5fd2b639bf6
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -0,0 +1,813 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include <linux/console.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/radeon_drm.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+#include "radeon_asic.h"
+#include "atom.h"
+
+/*
+ * GPU scratch registers helpers function.
+ */
+static void radeon_scratch_init(struct radeon_device *rdev)
+{
+	int i;
+
+	/* FIXME: check this out */
+	if (rdev->family < CHIP_R300) {
+		rdev->scratch.num_reg = 5;
+	} else {
+		rdev->scratch.num_reg = 7;
+	}
+	for (i = 0; i < rdev->scratch.num_reg; i++) {
+		rdev->scratch.free[i] = true;
+		rdev->scratch.reg[i] = RADEON_SCRATCH_REG0 + (i * 4);
+	}
+}
+
+int radeon_scratch_get(struct radeon_device *rdev, uint32_t *reg)
+{
+	int i;
+
+	for (i = 0; i < rdev->scratch.num_reg; i++) {
+		if (rdev->scratch.free[i]) {
+			rdev->scratch.free[i] = false;
+			*reg = rdev->scratch.reg[i];
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+void radeon_scratch_free(struct radeon_device *rdev, uint32_t reg)
+{
+	int i;
+
+	for (i = 0; i < rdev->scratch.num_reg; i++) {
+		if (rdev->scratch.reg[i] == reg) {
+			rdev->scratch.free[i] = true;
+			return;
+		}
+	}
+}
+
+/*
+ * MC common functions
+ */
+int radeon_mc_setup(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	/* Some chips have an "issue" with the memory controller, the
+	 * location must be aligned to the size. We just align it down,
+	 * too bad if we walk over the top of system memory, we don't
+	 * use DMA without a remapped anyway.
+	 * Affected chips are rv280, all r3xx, and all r4xx, but not IGP
+	 */
+	/* FGLRX seems to setup like this, VRAM a 0, then GART.
+	 */
+	/*
+	 * Note: from R6xx the address space is 40bits but here we only
+	 * use 32bits (still have to see a card which would exhaust 4G
+	 * address space).
+	 */
+	if (rdev->mc.vram_location != 0xFFFFFFFFUL) {
+		/* vram location was already setup try to put gtt after
+		 * if it fits */
+		tmp = rdev->mc.vram_location + rdev->mc.vram_size;
+		tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
+		if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) {
+			rdev->mc.gtt_location = tmp;
+		} else {
+			if (rdev->mc.gtt_size >= rdev->mc.vram_location) {
+				printk(KERN_ERR "[drm] GTT too big to fit "
+				       "before or after vram location.\n");
+				return -EINVAL;
+			}
+			rdev->mc.gtt_location = 0;
+		}
+	} else if (rdev->mc.gtt_location != 0xFFFFFFFFUL) {
+		/* gtt location was already setup try to put vram before
+		 * if it fits */
+		if (rdev->mc.vram_size < rdev->mc.gtt_location) {
+			rdev->mc.vram_location = 0;
+		} else {
+			tmp = rdev->mc.gtt_location + rdev->mc.gtt_size;
+			tmp += (rdev->mc.vram_size - 1);
+			tmp &= ~(rdev->mc.vram_size - 1);
+			if ((0xFFFFFFFFUL - tmp) >= rdev->mc.vram_size) {
+				rdev->mc.vram_location = tmp;
+			} else {
+				printk(KERN_ERR "[drm] vram too big to fit "
+				       "before or after GTT location.\n");
+				return -EINVAL;
+			}
+		}
+	} else {
+		rdev->mc.vram_location = 0;
+		rdev->mc.gtt_location = rdev->mc.vram_size;
+	}
+	DRM_INFO("radeon: VRAM %uM\n", rdev->mc.vram_size >> 20);
+	DRM_INFO("radeon: VRAM from 0x%08X to 0x%08X\n",
+		 rdev->mc.vram_location,
+		 rdev->mc.vram_location + rdev->mc.vram_size - 1);
+	DRM_INFO("radeon: GTT %uM\n", rdev->mc.gtt_size >> 20);
+	DRM_INFO("radeon: GTT from 0x%08X to 0x%08X\n",
+		 rdev->mc.gtt_location,
+		 rdev->mc.gtt_location + rdev->mc.gtt_size - 1);
+	return 0;
+}
+
+
+/*
+ * GPU helpers function.
+ */
+static bool radeon_card_posted(struct radeon_device *rdev)
+{
+	uint32_t reg;
+
+	/* first check CRTCs */
+	if (ASIC_IS_AVIVO(rdev)) {
+		reg = RREG32(AVIVO_D1CRTC_CONTROL) |
+		      RREG32(AVIVO_D2CRTC_CONTROL);
+		if (reg & AVIVO_CRTC_EN) {
+			return true;
+		}
+	} else {
+		reg = RREG32(RADEON_CRTC_GEN_CNTL) |
+		      RREG32(RADEON_CRTC2_GEN_CNTL);
+		if (reg & RADEON_CRTC_EN) {
+			return true;
+		}
+	}
+
+	/* then check MEM_SIZE, in case the crtcs are off */
+	if (rdev->family >= CHIP_R600)
+		reg = RREG32(R600_CONFIG_MEMSIZE);
+	else
+		reg = RREG32(RADEON_CONFIG_MEMSIZE);
+
+	if (reg)
+		return true;
+
+	return false;
+
+}
+
+
+/*
+ * Registers accessors functions.
+ */
+uint32_t radeon_invalid_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	DRM_ERROR("Invalid callback to read register 0x%04X\n", reg);
+	BUG_ON(1);
+	return 0;
+}
+
+void radeon_invalid_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	DRM_ERROR("Invalid callback to write register 0x%04X with 0x%08X\n",
+		  reg, v);
+	BUG_ON(1);
+}
+
+void radeon_register_accessor_init(struct radeon_device *rdev)
+{
+	rdev->mm_rreg = &r100_mm_rreg;
+	rdev->mm_wreg = &r100_mm_wreg;
+	rdev->mc_rreg = &radeon_invalid_rreg;
+	rdev->mc_wreg = &radeon_invalid_wreg;
+	rdev->pll_rreg = &radeon_invalid_rreg;
+	rdev->pll_wreg = &radeon_invalid_wreg;
+	rdev->pcie_rreg = &radeon_invalid_rreg;
+	rdev->pcie_wreg = &radeon_invalid_wreg;
+	rdev->pciep_rreg = &radeon_invalid_rreg;
+	rdev->pciep_wreg = &radeon_invalid_wreg;
+
+	/* Don't change order as we are overridding accessor. */
+	if (rdev->family < CHIP_RV515) {
+		rdev->pcie_rreg = &rv370_pcie_rreg;
+		rdev->pcie_wreg = &rv370_pcie_wreg;
+	}
+	if (rdev->family >= CHIP_RV515) {
+		rdev->pcie_rreg = &rv515_pcie_rreg;
+		rdev->pcie_wreg = &rv515_pcie_wreg;
+	}
+	/* FIXME: not sure here */
+	if (rdev->family <= CHIP_R580) {
+		rdev->pll_rreg = &r100_pll_rreg;
+		rdev->pll_wreg = &r100_pll_wreg;
+	}
+	if (rdev->family >= CHIP_RV515) {
+		rdev->mc_rreg = &rv515_mc_rreg;
+		rdev->mc_wreg = &rv515_mc_wreg;
+	}
+	if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
+		rdev->mc_rreg = &rs400_mc_rreg;
+		rdev->mc_wreg = &rs400_mc_wreg;
+	}
+	if (rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) {
+		rdev->mc_rreg = &rs690_mc_rreg;
+		rdev->mc_wreg = &rs690_mc_wreg;
+	}
+	if (rdev->family == CHIP_RS600) {
+		rdev->mc_rreg = &rs600_mc_rreg;
+		rdev->mc_wreg = &rs600_mc_wreg;
+	}
+	if (rdev->family >= CHIP_R600) {
+		rdev->pciep_rreg = &r600_pciep_rreg;
+		rdev->pciep_wreg = &r600_pciep_wreg;
+	}
+}
+
+
+/*
+ * ASIC
+ */
+int radeon_asic_init(struct radeon_device *rdev)
+{
+	radeon_register_accessor_init(rdev);
+	switch (rdev->family) {
+	case CHIP_R100:
+	case CHIP_RV100:
+	case CHIP_RS100:
+	case CHIP_RV200:
+	case CHIP_RS200:
+	case CHIP_R200:
+	case CHIP_RV250:
+	case CHIP_RS300:
+	case CHIP_RV280:
+		rdev->asic = &r100_asic;
+		break;
+	case CHIP_R300:
+	case CHIP_R350:
+	case CHIP_RV350:
+	case CHIP_RV380:
+		rdev->asic = &r300_asic;
+		break;
+	case CHIP_R420:
+	case CHIP_R423:
+	case CHIP_RV410:
+		rdev->asic = &r420_asic;
+		break;
+	case CHIP_RS400:
+	case CHIP_RS480:
+		rdev->asic = &rs400_asic;
+		break;
+	case CHIP_RS600:
+		rdev->asic = &rs600_asic;
+		break;
+	case CHIP_RS690:
+	case CHIP_RS740:
+		rdev->asic = &rs690_asic;
+		break;
+	case CHIP_RV515:
+		rdev->asic = &rv515_asic;
+		break;
+	case CHIP_R520:
+	case CHIP_RV530:
+	case CHIP_RV560:
+	case CHIP_RV570:
+	case CHIP_R580:
+		rdev->asic = &r520_asic;
+		break;
+	case CHIP_R600:
+	case CHIP_RV610:
+	case CHIP_RV630:
+	case CHIP_RV620:
+	case CHIP_RV635:
+	case CHIP_RV670:
+	case CHIP_RS780:
+	case CHIP_RV770:
+	case CHIP_RV730:
+	case CHIP_RV710:
+	default:
+		/* FIXME: not supported yet */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+/*
+ * Wrapper around modesetting bits.
+ */
+int radeon_clocks_init(struct radeon_device *rdev)
+{
+	int r;
+
+	radeon_get_clock_info(rdev->ddev);
+	r = radeon_static_clocks_init(rdev->ddev);
+	if (r) {
+		return r;
+	}
+	DRM_INFO("Clocks initialized !\n");
+	return 0;
+}
+
+void radeon_clocks_fini(struct radeon_device *rdev)
+{
+}
+
+/* ATOM accessor methods */
+static uint32_t cail_pll_read(struct card_info *info, uint32_t reg)
+{
+	struct radeon_device *rdev = info->dev->dev_private;
+	uint32_t r;
+
+	r = rdev->pll_rreg(rdev, reg);
+	return r;
+}
+
+static void cail_pll_write(struct card_info *info, uint32_t reg, uint32_t val)
+{
+	struct radeon_device *rdev = info->dev->dev_private;
+
+	rdev->pll_wreg(rdev, reg, val);
+}
+
+static uint32_t cail_mc_read(struct card_info *info, uint32_t reg)
+{
+	struct radeon_device *rdev = info->dev->dev_private;
+	uint32_t r;
+
+	r = rdev->mc_rreg(rdev, reg);
+	return r;
+}
+
+static void cail_mc_write(struct card_info *info, uint32_t reg, uint32_t val)
+{
+	struct radeon_device *rdev = info->dev->dev_private;
+
+	rdev->mc_wreg(rdev, reg, val);
+}
+
+static void cail_reg_write(struct card_info *info, uint32_t reg, uint32_t val)
+{
+	struct radeon_device *rdev = info->dev->dev_private;
+
+	WREG32(reg*4, val);
+}
+
+static uint32_t cail_reg_read(struct card_info *info, uint32_t reg)
+{
+	struct radeon_device *rdev = info->dev->dev_private;
+	uint32_t r;
+
+	r = RREG32(reg*4);
+	return r;
+}
+
+static struct card_info atom_card_info = {
+	.dev = NULL,
+	.reg_read = cail_reg_read,
+	.reg_write = cail_reg_write,
+	.mc_read = cail_mc_read,
+	.mc_write = cail_mc_write,
+	.pll_read = cail_pll_read,
+	.pll_write = cail_pll_write,
+};
+
+int radeon_atombios_init(struct radeon_device *rdev)
+{
+	atom_card_info.dev = rdev->ddev;
+	rdev->mode_info.atom_context = atom_parse(&atom_card_info, rdev->bios);
+	radeon_atom_initialize_bios_scratch_regs(rdev->ddev);
+	return 0;
+}
+
+void radeon_atombios_fini(struct radeon_device *rdev)
+{
+	kfree(rdev->mode_info.atom_context);
+}
+
+int radeon_combios_init(struct radeon_device *rdev)
+{
+	radeon_combios_initialize_bios_scratch_regs(rdev->ddev);
+	return 0;
+}
+
+void radeon_combios_fini(struct radeon_device *rdev)
+{
+}
+
+int radeon_modeset_init(struct radeon_device *rdev);
+void radeon_modeset_fini(struct radeon_device *rdev);
+
+
+/*
+ * Radeon device.
+ */
+int radeon_device_init(struct radeon_device *rdev,
+		       struct drm_device *ddev,
+		       struct pci_dev *pdev,
+		       uint32_t flags)
+{
+	int r, ret;
+
+	DRM_INFO("radeon: Initializing kernel modesetting.\n");
+	rdev->shutdown = false;
+	rdev->ddev = ddev;
+	rdev->pdev = pdev;
+	rdev->flags = flags;
+	rdev->family = flags & RADEON_FAMILY_MASK;
+	rdev->is_atom_bios = false;
+	rdev->usec_timeout = RADEON_MAX_USEC_TIMEOUT;
+	rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+	rdev->gpu_lockup = false;
+	/* mutex initialization are all done here so we
+	 * can recall function without having locking issues */
+	mutex_init(&rdev->cs_mutex);
+	mutex_init(&rdev->ib_pool.mutex);
+	mutex_init(&rdev->cp.mutex);
+	rwlock_init(&rdev->fence_drv.lock);
+
+	if (radeon_agpmode == -1) {
+		rdev->flags &= ~RADEON_IS_AGP;
+		if (rdev->family > CHIP_RV515 ||
+		    rdev->family == CHIP_RV380 ||
+		    rdev->family == CHIP_RV410 ||
+		    rdev->family == CHIP_R423) {
+			DRM_INFO("Forcing AGP to PCIE mode\n");
+			rdev->flags |= RADEON_IS_PCIE;
+		} else {
+			DRM_INFO("Forcing AGP to PCI mode\n");
+			rdev->flags |= RADEON_IS_PCI;
+		}
+	}
+
+	/* Set asic functions */
+	r = radeon_asic_init(rdev);
+	if (r) {
+		return r;
+	}
+
+	/* Report DMA addressing limitation */
+	r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(32));
+	if (r) {
+		printk(KERN_WARNING "radeon: No suitable DMA available.\n");
+	}
+
+	/* Registers mapping */
+	/* TODO: block userspace mapping of io register */
+	rdev->rmmio_base = drm_get_resource_start(rdev->ddev, 2);
+	rdev->rmmio_size = drm_get_resource_len(rdev->ddev, 2);
+	rdev->rmmio = ioremap(rdev->rmmio_base, rdev->rmmio_size);
+	if (rdev->rmmio == NULL) {
+		return -ENOMEM;
+	}
+	DRM_INFO("register mmio base: 0x%08X\n", (uint32_t)rdev->rmmio_base);
+	DRM_INFO("register mmio size: %u\n", (unsigned)rdev->rmmio_size);
+
+	/* Setup errata flags */
+	radeon_errata(rdev);
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r) {
+			return r;
+		}
+	} else {
+		r = radeon_combios_init(rdev);
+		if (r) {
+			return r;
+		}
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		/* FIXME: what do we want to do here ? */
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		if (rdev->is_atom_bios) {
+			atom_asic_init(rdev->mode_info.atom_context);
+		} else {
+			radeon_combios_asic_init(rdev->ddev);
+		}
+	}
+	/* Get vram informations */
+	radeon_vram_info(rdev);
+	/* Device is severly broken if aper size > vram size.
+	 * for RN50/M6/M7 - Novell bug 204882 ?
+	 */
+	if (rdev->mc.vram_size < rdev->mc.aper_size) {
+		rdev->mc.aper_size = rdev->mc.vram_size;
+	}
+	/* Add an MTRR for the VRAM */
+	rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size,
+				      MTRR_TYPE_WRCOMB, 1);
+	DRM_INFO("Detected VRAM RAM=%uM, BAR=%uM\n",
+		 rdev->mc.vram_size >> 20,
+		 (unsigned)rdev->mc.aper_size >> 20);
+	DRM_INFO("RAM width %dbits %cDR\n",
+		 rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S');
+	/* Initialize clocks */
+	r = radeon_clocks_init(rdev);
+	if (r) {
+		return r;
+	}
+	/* Initialize memory controller (also test AGP) */
+	r = radeon_mc_init(rdev);
+	if (r) {
+		return r;
+	}
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r) {
+		return r;
+	}
+	r = radeon_irq_kms_init(rdev);
+	if (r) {
+		return r;
+	}
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r) {
+		return r;
+	}
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	r = radeon_gart_enable(rdev);
+	if (!r) {
+		r = radeon_gem_init(rdev);
+	}
+
+	/* 1M ring buffer */
+	if (!r) {
+		r = radeon_cp_init(rdev, 1024 * 1024);
+	}
+	if (!r) {
+		r = radeon_wb_init(rdev);
+		if (r) {
+			DRM_ERROR("radeon: failled initializing WB (%d).\n", r);
+			return r;
+		}
+	}
+	if (!r) {
+		r = radeon_ib_pool_init(rdev);
+		if (r) {
+			DRM_ERROR("radeon: failled initializing IB pool (%d).\n", r);
+			return r;
+		}
+	}
+	if (!r) {
+		r = radeon_ib_test(rdev);
+		if (r) {
+			DRM_ERROR("radeon: failled testing IB (%d).\n", r);
+			return r;
+		}
+	}
+	ret = r;
+	r = radeon_modeset_init(rdev);
+	if (r) {
+		return r;
+	}
+	if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) {
+		rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private;
+	}
+	if (!ret) {
+		DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
+	}
+	if (radeon_benchmarking) {
+		radeon_benchmark(rdev);
+	}
+	return ret;
+}
+
+void radeon_device_fini(struct radeon_device *rdev)
+{
+	if (rdev == NULL || rdev->rmmio == NULL) {
+		return;
+	}
+	DRM_INFO("radeon: finishing device.\n");
+	rdev->shutdown = true;
+	/* Order matter so becarefull if you rearrange anythings */
+	radeon_modeset_fini(rdev);
+	radeon_ib_pool_fini(rdev);
+	radeon_cp_fini(rdev);
+	radeon_wb_fini(rdev);
+	radeon_gem_fini(rdev);
+	radeon_object_fini(rdev);
+	/* mc_fini must be after object_fini */
+	radeon_mc_fini(rdev);
+#if __OS_HAS_AGP
+	radeon_agp_fini(rdev);
+#endif
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_clocks_fini(rdev);
+	if (rdev->is_atom_bios) {
+		radeon_atombios_fini(rdev);
+	} else {
+		radeon_combios_fini(rdev);
+	}
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+	iounmap(rdev->rmmio);
+	rdev->rmmio = NULL;
+}
+
+
+/*
+ * Suspend & resume.
+ */
+int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_crtc *crtc;
+
+	if (dev == NULL || rdev == NULL) {
+		return -ENODEV;
+	}
+	if (state.event == PM_EVENT_PRETHAW) {
+		return 0;
+	}
+	/* unpin the front buffers */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct radeon_framebuffer *rfb = to_radeon_framebuffer(crtc->fb);
+		struct radeon_object *robj;
+
+		if (rfb == NULL || rfb->obj == NULL) {
+			continue;
+		}
+		robj = rfb->obj->driver_private;
+		if (robj != rdev->fbdev_robj) {
+			radeon_object_unpin(robj);
+		}
+	}
+	/* evict vram memory */
+	radeon_object_evict_vram(rdev);
+	/* wait for gpu to finish processing current batch */
+	radeon_fence_wait_last(rdev);
+
+	radeon_cp_disable(rdev);
+	radeon_gart_disable(rdev);
+
+	/* evict remaining vram memory */
+	radeon_object_evict_vram(rdev);
+
+	rdev->irq.sw_int = false;
+	radeon_irq_set(rdev);
+
+	pci_save_state(dev->pdev);
+	if (state.event == PM_EVENT_SUSPEND) {
+		/* Shut down the device */
+		pci_disable_device(dev->pdev);
+		pci_set_power_state(dev->pdev, PCI_D3hot);
+	}
+	acquire_console_sem();
+	fb_set_suspend(rdev->fbdev_info, 1);
+	release_console_sem();
+	return 0;
+}
+
+int radeon_resume_kms(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	int r;
+
+	acquire_console_sem();
+	pci_set_power_state(dev->pdev, PCI_D0);
+	pci_restore_state(dev->pdev);
+	if (pci_enable_device(dev->pdev)) {
+		release_console_sem();
+		return -1;
+	}
+	pci_set_master(dev->pdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		/* FIXME: what do we want to do here ? */
+	}
+	/* post card */
+	if (rdev->is_atom_bios) {
+		atom_asic_init(rdev->mode_info.atom_context);
+	} else {
+		radeon_combios_asic_init(rdev->ddev);
+	}
+	/* Initialize clocks */
+	r = radeon_clocks_init(rdev);
+	if (r) {
+		release_console_sem();
+		return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	radeon_irq_set(rdev);
+	/* Initialize GPU Memory Controller */
+	r = radeon_mc_init(rdev);
+	if (r) {
+		goto out;
+	}
+	r = radeon_gart_enable(rdev);
+	if (r) {
+		goto out;
+	}
+	r = radeon_cp_init(rdev, rdev->cp.ring_size);
+	if (r) {
+		goto out;
+	}
+out:
+	fb_set_suspend(rdev->fbdev_info, 0);
+	release_console_sem();
+
+	/* blat the mode back in */
+	drm_helper_resume_force_mode(dev);
+	return 0;
+}
+
+
+/*
+ * Debugfs
+ */
+struct radeon_debugfs {
+	struct drm_info_list	*files;
+	unsigned		num_files;
+};
+static struct radeon_debugfs _radeon_debugfs[RADEON_DEBUGFS_MAX_NUM_FILES];
+static unsigned _radeon_debugfs_count = 0;
+
+int radeon_debugfs_add_files(struct radeon_device *rdev,
+			     struct drm_info_list *files,
+			     unsigned nfiles)
+{
+	unsigned i;
+
+	for (i = 0; i < _radeon_debugfs_count; i++) {
+		if (_radeon_debugfs[i].files == files) {
+			/* Already registered */
+			return 0;
+		}
+	}
+	if ((_radeon_debugfs_count + nfiles) > RADEON_DEBUGFS_MAX_NUM_FILES) {
+		DRM_ERROR("Reached maximum number of debugfs files.\n");
+		DRM_ERROR("Report so we increase RADEON_DEBUGFS_MAX_NUM_FILES.\n");
+		return -EINVAL;
+	}
+	_radeon_debugfs[_radeon_debugfs_count].files = files;
+	_radeon_debugfs[_radeon_debugfs_count].num_files = nfiles;
+	_radeon_debugfs_count++;
+#if defined(CONFIG_DEBUG_FS)
+	drm_debugfs_create_files(files, nfiles,
+				 rdev->ddev->control->debugfs_root,
+				 rdev->ddev->control);
+	drm_debugfs_create_files(files, nfiles,
+				 rdev->ddev->primary->debugfs_root,
+				 rdev->ddev->primary);
+#endif
+	return 0;
+}
+
+#if defined(CONFIG_DEBUG_FS)
+int radeon_debugfs_init(struct drm_minor *minor)
+{
+	return 0;
+}
+
+void radeon_debugfs_cleanup(struct drm_minor *minor)
+{
+	unsigned i;
+
+	for (i = 0; i < _radeon_debugfs_count; i++) {
+		drm_debugfs_remove_files(_radeon_debugfs[i].files,
+					 _radeon_debugfs[i].num_files, minor);
+	}
+}
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
new file mode 100644
index 00000000000..5452bb9d925
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -0,0 +1,692 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+
+#include "atom.h"
+#include <asm/div64.h>
+
+#include "drm_crtc_helper.h"
+#include "drm_edid.h"
+
+static int radeon_ddc_dump(struct drm_connector *connector);
+
+static void avivo_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	int i;
+
+	DRM_DEBUG("%d\n", radeon_crtc->crtc_id);
+	WREG32(AVIVO_DC_LUTA_CONTROL + radeon_crtc->crtc_offset, 0);
+
+	WREG32(AVIVO_DC_LUTA_BLACK_OFFSET_BLUE + radeon_crtc->crtc_offset, 0);
+	WREG32(AVIVO_DC_LUTA_BLACK_OFFSET_GREEN + radeon_crtc->crtc_offset, 0);
+	WREG32(AVIVO_DC_LUTA_BLACK_OFFSET_RED + radeon_crtc->crtc_offset, 0);
+
+	WREG32(AVIVO_DC_LUTA_WHITE_OFFSET_BLUE + radeon_crtc->crtc_offset, 0xffff);
+	WREG32(AVIVO_DC_LUTA_WHITE_OFFSET_GREEN + radeon_crtc->crtc_offset, 0xffff);
+	WREG32(AVIVO_DC_LUTA_WHITE_OFFSET_RED + radeon_crtc->crtc_offset, 0xffff);
+
+	WREG32(AVIVO_DC_LUT_RW_SELECT, radeon_crtc->crtc_id);
+	WREG32(AVIVO_DC_LUT_RW_MODE, 0);
+	WREG32(AVIVO_DC_LUT_WRITE_EN_MASK, 0x0000003f);
+
+	WREG8(AVIVO_DC_LUT_RW_INDEX, 0);
+	for (i = 0; i < 256; i++) {
+		WREG32(AVIVO_DC_LUT_30_COLOR,
+			     (radeon_crtc->lut_r[i] << 20) |
+			     (radeon_crtc->lut_g[i] << 10) |
+			     (radeon_crtc->lut_b[i] << 0));
+	}
+
+	WREG32(AVIVO_D1GRPH_LUT_SEL + radeon_crtc->crtc_offset, radeon_crtc->crtc_id);
+}
+
+static void legacy_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	int i;
+	uint32_t dac2_cntl;
+
+	dac2_cntl = RREG32(RADEON_DAC_CNTL2);
+	if (radeon_crtc->crtc_id == 0)
+		dac2_cntl &= (uint32_t)~RADEON_DAC2_PALETTE_ACC_CTL;
+	else
+		dac2_cntl |= RADEON_DAC2_PALETTE_ACC_CTL;
+	WREG32(RADEON_DAC_CNTL2, dac2_cntl);
+
+	WREG8(RADEON_PALETTE_INDEX, 0);
+	for (i = 0; i < 256; i++) {
+		WREG32(RADEON_PALETTE_30_DATA,
+			     (radeon_crtc->lut_r[i] << 20) |
+			     (radeon_crtc->lut_g[i] << 10) |
+			     (radeon_crtc->lut_b[i] << 0));
+	}
+}
+
+void radeon_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (!crtc->enabled)
+		return;
+
+	if (ASIC_IS_AVIVO(rdev))
+		avivo_crtc_load_lut(crtc);
+	else
+		legacy_crtc_load_lut(crtc);
+}
+
+/** Sets the color ramps on behalf of RandR */
+void radeon_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+			      u16 blue, int regno)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+	if (regno == 0)
+		DRM_DEBUG("gamma set %d\n", radeon_crtc->crtc_id);
+	radeon_crtc->lut_r[regno] = red >> 6;
+	radeon_crtc->lut_g[regno] = green >> 6;
+	radeon_crtc->lut_b[regno] = blue >> 6;
+}
+
+static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
+				  u16 *blue, uint32_t size)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	int i, j;
+
+	if (size != 256) {
+		return;
+	}
+	if (crtc->fb == NULL) {
+		return;
+	}
+
+	if (crtc->fb->depth == 16) {
+		for (i = 0; i < 64; i++) {
+			if (i <= 31) {
+				for (j = 0; j < 8; j++) {
+					radeon_crtc->lut_r[i * 8 + j] = red[i] >> 6;
+					radeon_crtc->lut_b[i * 8 + j] = blue[i] >> 6;
+				}
+			}
+			for (j = 0; j < 4; j++)
+				radeon_crtc->lut_g[i * 4 + j] = green[i] >> 6;
+		}
+	} else {
+		for (i = 0; i < 256; i++) {
+			radeon_crtc->lut_r[i] = red[i] >> 6;
+			radeon_crtc->lut_g[i] = green[i] >> 6;
+			radeon_crtc->lut_b[i] = blue[i] >> 6;
+		}
+	}
+
+	radeon_crtc_load_lut(crtc);
+}
+
+static void radeon_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+	if (radeon_crtc->mode_set.mode) {
+		drm_mode_destroy(crtc->dev, radeon_crtc->mode_set.mode);
+	}
+	drm_crtc_cleanup(crtc);
+	kfree(radeon_crtc);
+}
+
+static const struct drm_crtc_funcs radeon_crtc_funcs = {
+	.cursor_set = radeon_crtc_cursor_set,
+	.cursor_move = radeon_crtc_cursor_move,
+	.gamma_set = radeon_crtc_gamma_set,
+	.set_config = drm_crtc_helper_set_config,
+	.destroy = radeon_crtc_destroy,
+};
+
+static void radeon_crtc_init(struct drm_device *dev, int index)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc;
+	int i;
+
+	radeon_crtc = kzalloc(sizeof(struct radeon_crtc) + (RADEONFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
+	if (radeon_crtc == NULL)
+		return;
+
+	drm_crtc_init(dev, &radeon_crtc->base, &radeon_crtc_funcs);
+
+	drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256);
+	radeon_crtc->crtc_id = index;
+
+	radeon_crtc->mode_set.crtc = &radeon_crtc->base;
+	radeon_crtc->mode_set.connectors = (struct drm_connector **)(radeon_crtc + 1);
+	radeon_crtc->mode_set.num_connectors = 0;
+
+	for (i = 0; i < 256; i++) {
+		radeon_crtc->lut_r[i] = i << 2;
+		radeon_crtc->lut_g[i] = i << 2;
+		radeon_crtc->lut_b[i] = i << 2;
+	}
+
+	if (rdev->is_atom_bios && (ASIC_IS_AVIVO(rdev) || radeon_r4xx_atom))
+		radeon_atombios_init_crtc(dev, radeon_crtc);
+	else
+		radeon_legacy_init_crtc(dev, radeon_crtc);
+}
+
+static const char *encoder_names[34] = {
+	"NONE",
+	"INTERNAL_LVDS",
+	"INTERNAL_TMDS1",
+	"INTERNAL_TMDS2",
+	"INTERNAL_DAC1",
+	"INTERNAL_DAC2",
+	"INTERNAL_SDVOA",
+	"INTERNAL_SDVOB",
+	"SI170B",
+	"CH7303",
+	"CH7301",
+	"INTERNAL_DVO1",
+	"EXTERNAL_SDVOA",
+	"EXTERNAL_SDVOB",
+	"TITFP513",
+	"INTERNAL_LVTM1",
+	"VT1623",
+	"HDMI_SI1930",
+	"HDMI_INTERNAL",
+	"INTERNAL_KLDSCP_TMDS1",
+	"INTERNAL_KLDSCP_DVO1",
+	"INTERNAL_KLDSCP_DAC1",
+	"INTERNAL_KLDSCP_DAC2",
+	"SI178",
+	"MVPU_FPGA",
+	"INTERNAL_DDI",
+	"VT1625",
+	"HDMI_SI1932",
+	"DP_AN9801",
+	"DP_DP501",
+	"INTERNAL_UNIPHY",
+	"INTERNAL_KLDSCP_LVTMA",
+	"INTERNAL_UNIPHY1",
+	"INTERNAL_UNIPHY2",
+};
+
+static const char *connector_names[13] = {
+	"Unknown",
+	"VGA",
+	"DVI-I",
+	"DVI-D",
+	"DVI-A",
+	"Composite",
+	"S-video",
+	"LVDS",
+	"Component",
+	"DIN",
+	"DisplayPort",
+	"HDMI-A",
+	"HDMI-B",
+};
+
+static void radeon_print_display_setup(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+	struct drm_encoder *encoder;
+	struct radeon_encoder *radeon_encoder;
+	uint32_t devices;
+	int i = 0;
+
+	DRM_INFO("Radeon Display Connectors\n");
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		radeon_connector = to_radeon_connector(connector);
+		DRM_INFO("Connector %d:\n", i);
+		DRM_INFO("  %s\n", connector_names[connector->connector_type]);
+		if (radeon_connector->ddc_bus)
+			DRM_INFO("  DDC: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+				 radeon_connector->ddc_bus->rec.mask_clk_reg,
+				 radeon_connector->ddc_bus->rec.mask_data_reg,
+				 radeon_connector->ddc_bus->rec.a_clk_reg,
+				 radeon_connector->ddc_bus->rec.a_data_reg,
+				 radeon_connector->ddc_bus->rec.put_clk_reg,
+				 radeon_connector->ddc_bus->rec.put_data_reg,
+				 radeon_connector->ddc_bus->rec.get_clk_reg,
+				 radeon_connector->ddc_bus->rec.get_data_reg);
+		DRM_INFO("  Encoders:\n");
+		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+			radeon_encoder = to_radeon_encoder(encoder);
+			devices = radeon_encoder->devices & radeon_connector->devices;
+			if (devices) {
+				if (devices & ATOM_DEVICE_CRT1_SUPPORT)
+					DRM_INFO("    CRT1: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_CRT2_SUPPORT)
+					DRM_INFO("    CRT2: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_LCD1_SUPPORT)
+					DRM_INFO("    LCD1: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_DFP1_SUPPORT)
+					DRM_INFO("    DFP1: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_DFP2_SUPPORT)
+					DRM_INFO("    DFP2: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_DFP3_SUPPORT)
+					DRM_INFO("    DFP3: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_DFP4_SUPPORT)
+					DRM_INFO("    DFP4: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_DFP5_SUPPORT)
+					DRM_INFO("    DFP5: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_TV1_SUPPORT)
+					DRM_INFO("    TV1: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_CV_SUPPORT)
+					DRM_INFO("    CV: %s\n", encoder_names[radeon_encoder->encoder_id]);
+			}
+		}
+		i++;
+	}
+}
+
+bool radeon_setup_enc_conn(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_connector *drm_connector;
+	bool ret = false;
+
+	if (rdev->bios) {
+		if (rdev->is_atom_bios) {
+			if (rdev->family >= CHIP_R600)
+				ret = radeon_get_atom_connector_info_from_object_table(dev);
+			else
+				ret = radeon_get_atom_connector_info_from_supported_devices_table(dev);
+		} else
+			ret = radeon_get_legacy_connector_info_from_bios(dev);
+	} else {
+		if (!ASIC_IS_AVIVO(rdev))
+			ret = radeon_get_legacy_connector_info_from_table(dev);
+	}
+	if (ret) {
+		radeon_print_display_setup(dev);
+		list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head)
+			radeon_ddc_dump(drm_connector);
+	}
+
+	return ret;
+}
+
+int radeon_ddc_get_modes(struct radeon_connector *radeon_connector)
+{
+	struct edid *edid;
+	int ret = 0;
+
+	if (!radeon_connector->ddc_bus)
+		return -1;
+	radeon_i2c_do_lock(radeon_connector, 1);
+	edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter);
+	radeon_i2c_do_lock(radeon_connector, 0);
+	if (edid) {
+		/* update digital bits here */
+		if (edid->digital)
+			radeon_connector->use_digital = 1;
+		else
+			radeon_connector->use_digital = 0;
+		drm_mode_connector_update_edid_property(&radeon_connector->base, edid);
+		ret = drm_add_edid_modes(&radeon_connector->base, edid);
+		kfree(edid);
+		return ret;
+	}
+	drm_mode_connector_update_edid_property(&radeon_connector->base, NULL);
+	return -1;
+}
+
+static int radeon_ddc_dump(struct drm_connector *connector)
+{
+	struct edid *edid;
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	int ret = 0;
+
+	if (!radeon_connector->ddc_bus)
+		return -1;
+	radeon_i2c_do_lock(radeon_connector, 1);
+	edid = drm_get_edid(connector, &radeon_connector->ddc_bus->adapter);
+	radeon_i2c_do_lock(radeon_connector, 0);
+	if (edid) {
+		kfree(edid);
+	}
+	return ret;
+}
+
+static inline uint32_t radeon_div(uint64_t n, uint32_t d)
+{
+	uint64_t mod;
+
+	n += d / 2;
+
+	mod = do_div(n, d);
+	return n;
+}
+
+void radeon_compute_pll(struct radeon_pll *pll,
+			uint64_t freq,
+			uint32_t *dot_clock_p,
+			uint32_t *fb_div_p,
+			uint32_t *frac_fb_div_p,
+			uint32_t *ref_div_p,
+			uint32_t *post_div_p,
+			int flags)
+{
+	uint32_t min_ref_div = pll->min_ref_div;
+	uint32_t max_ref_div = pll->max_ref_div;
+	uint32_t min_fractional_feed_div = 0;
+	uint32_t max_fractional_feed_div = 0;
+	uint32_t best_vco = pll->best_vco;
+	uint32_t best_post_div = 1;
+	uint32_t best_ref_div = 1;
+	uint32_t best_feedback_div = 1;
+	uint32_t best_frac_feedback_div = 0;
+	uint32_t best_freq = -1;
+	uint32_t best_error = 0xffffffff;
+	uint32_t best_vco_diff = 1;
+	uint32_t post_div;
+
+	DRM_DEBUG("PLL freq %llu %u %u\n", freq, pll->min_ref_div, pll->max_ref_div);
+	freq = freq * 1000;
+
+	if (flags & RADEON_PLL_USE_REF_DIV)
+		min_ref_div = max_ref_div = pll->reference_div;
+	else {
+		while (min_ref_div < max_ref_div-1) {
+			uint32_t mid = (min_ref_div + max_ref_div) / 2;
+			uint32_t pll_in = pll->reference_freq / mid;
+			if (pll_in < pll->pll_in_min)
+				max_ref_div = mid;
+			else if (pll_in > pll->pll_in_max)
+				min_ref_div = mid;
+			else
+				break;
+		}
+	}
+
+	if (flags & RADEON_PLL_USE_FRAC_FB_DIV) {
+		min_fractional_feed_div = pll->min_frac_feedback_div;
+		max_fractional_feed_div = pll->max_frac_feedback_div;
+	}
+
+	for (post_div = pll->min_post_div; post_div <= pll->max_post_div; ++post_div) {
+		uint32_t ref_div;
+
+		if ((flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
+			continue;
+
+		/* legacy radeons only have a few post_divs */
+		if (flags & RADEON_PLL_LEGACY) {
+			if ((post_div == 5) ||
+			    (post_div == 7) ||
+			    (post_div == 9) ||
+			    (post_div == 10) ||
+			    (post_div == 11) ||
+			    (post_div == 13) ||
+			    (post_div == 14) ||
+			    (post_div == 15))
+				continue;
+		}
+
+		for (ref_div = min_ref_div; ref_div <= max_ref_div; ++ref_div) {
+			uint32_t feedback_div, current_freq = 0, error, vco_diff;
+			uint32_t pll_in = pll->reference_freq / ref_div;
+			uint32_t min_feed_div = pll->min_feedback_div;
+			uint32_t max_feed_div = pll->max_feedback_div + 1;
+
+			if (pll_in < pll->pll_in_min || pll_in > pll->pll_in_max)
+				continue;
+
+			while (min_feed_div < max_feed_div) {
+				uint32_t vco;
+				uint32_t min_frac_feed_div = min_fractional_feed_div;
+				uint32_t max_frac_feed_div = max_fractional_feed_div + 1;
+				uint32_t frac_feedback_div;
+				uint64_t tmp;
+
+				feedback_div = (min_feed_div + max_feed_div) / 2;
+
+				tmp = (uint64_t)pll->reference_freq * feedback_div;
+				vco = radeon_div(tmp, ref_div);
+
+				if (vco < pll->pll_out_min) {
+					min_feed_div = feedback_div + 1;
+					continue;
+				} else if (vco > pll->pll_out_max) {
+					max_feed_div = feedback_div;
+					continue;
+				}
+
+				while (min_frac_feed_div < max_frac_feed_div) {
+					frac_feedback_div = (min_frac_feed_div + max_frac_feed_div) / 2;
+					tmp = (uint64_t)pll->reference_freq * 10000 * feedback_div;
+					tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
+					current_freq = radeon_div(tmp, ref_div * post_div);
+
+					error = abs(current_freq - freq);
+					vco_diff = abs(vco - best_vco);
+
+					if ((best_vco == 0 && error < best_error) ||
+					    (best_vco != 0 &&
+					     (error < best_error - 100 ||
+					      (abs(error - best_error) < 100 && vco_diff < best_vco_diff)))) {
+						best_post_div = post_div;
+						best_ref_div = ref_div;
+						best_feedback_div = feedback_div;
+						best_frac_feedback_div = frac_feedback_div;
+						best_freq = current_freq;
+						best_error = error;
+						best_vco_diff = vco_diff;
+					} else if (current_freq == freq) {
+						if (best_freq == -1) {
+							best_post_div = post_div;
+							best_ref_div = ref_div;
+							best_feedback_div = feedback_div;
+							best_frac_feedback_div = frac_feedback_div;
+							best_freq = current_freq;
+							best_error = error;
+							best_vco_diff = vco_diff;
+						} else if (((flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) ||
+							   ((flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) ||
+							   ((flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) ||
+							   ((flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) ||
+							   ((flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) ||
+							   ((flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) {
+							best_post_div = post_div;
+							best_ref_div = ref_div;
+							best_feedback_div = feedback_div;
+							best_frac_feedback_div = frac_feedback_div;
+							best_freq = current_freq;
+							best_error = error;
+							best_vco_diff = vco_diff;
+						}
+					}
+					if (current_freq < freq)
+						min_frac_feed_div = frac_feedback_div + 1;
+					else
+						max_frac_feed_div = frac_feedback_div;
+				}
+				if (current_freq < freq)
+					min_feed_div = feedback_div + 1;
+				else
+					max_feed_div = feedback_div;
+			}
+		}
+	}
+
+	*dot_clock_p = best_freq / 10000;
+	*fb_div_p = best_feedback_div;
+	*frac_fb_div_p = best_frac_feedback_div;
+	*ref_div_p = best_ref_div;
+	*post_div_p = best_post_div;
+}
+
+static void radeon_user_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+	struct radeon_framebuffer *radeon_fb = to_radeon_framebuffer(fb);
+	struct drm_device *dev = fb->dev;
+
+	if (fb->fbdev)
+		radeonfb_remove(dev, fb);
+
+	if (radeon_fb->obj) {
+		radeon_gem_object_unpin(radeon_fb->obj);
+		mutex_lock(&dev->struct_mutex);
+		drm_gem_object_unreference(radeon_fb->obj);
+		mutex_unlock(&dev->struct_mutex);
+	}
+	drm_framebuffer_cleanup(fb);
+	kfree(radeon_fb);
+}
+
+static int radeon_user_framebuffer_create_handle(struct drm_framebuffer *fb,
+						  struct drm_file *file_priv,
+						  unsigned int *handle)
+{
+	struct radeon_framebuffer *radeon_fb = to_radeon_framebuffer(fb);
+
+	return drm_gem_handle_create(file_priv, radeon_fb->obj, handle);
+}
+
+static const struct drm_framebuffer_funcs radeon_fb_funcs = {
+	.destroy = radeon_user_framebuffer_destroy,
+	.create_handle = radeon_user_framebuffer_create_handle,
+};
+
+struct drm_framebuffer *
+radeon_framebuffer_create(struct drm_device *dev,
+			  struct drm_mode_fb_cmd *mode_cmd,
+			  struct drm_gem_object *obj)
+{
+	struct radeon_framebuffer *radeon_fb;
+
+	radeon_fb = kzalloc(sizeof(*radeon_fb), GFP_KERNEL);
+	if (radeon_fb == NULL) {
+		return NULL;
+	}
+	drm_framebuffer_init(dev, &radeon_fb->base, &radeon_fb_funcs);
+	drm_helper_mode_fill_fb_struct(&radeon_fb->base, mode_cmd);
+	radeon_fb->obj = obj;
+	return &radeon_fb->base;
+}
+
+static struct drm_framebuffer *
+radeon_user_framebuffer_create(struct drm_device *dev,
+			       struct drm_file *file_priv,
+			       struct drm_mode_fb_cmd *mode_cmd)
+{
+	struct drm_gem_object *obj;
+
+	obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle);
+
+	return radeon_framebuffer_create(dev, mode_cmd, obj);
+}
+
+static const struct drm_mode_config_funcs radeon_mode_funcs = {
+	.fb_create = radeon_user_framebuffer_create,
+	.fb_changed = radeonfb_probe,
+};
+
+int radeon_modeset_init(struct radeon_device *rdev)
+{
+	int num_crtc = 2, i;
+	int ret;
+
+	drm_mode_config_init(rdev->ddev);
+	rdev->mode_info.mode_config_initialized = true;
+
+	rdev->ddev->mode_config.funcs = (void *)&radeon_mode_funcs;
+
+	if (ASIC_IS_AVIVO(rdev)) {
+		rdev->ddev->mode_config.max_width = 8192;
+		rdev->ddev->mode_config.max_height = 8192;
+	} else {
+		rdev->ddev->mode_config.max_width = 4096;
+		rdev->ddev->mode_config.max_height = 4096;
+	}
+
+	rdev->ddev->mode_config.fb_base = rdev->mc.aper_base;
+
+	/* allocate crtcs - TODO single crtc */
+	for (i = 0; i < num_crtc; i++) {
+		radeon_crtc_init(rdev->ddev, i);
+	}
+
+	/* okay we should have all the bios connectors */
+	ret = radeon_setup_enc_conn(rdev->ddev);
+	if (!ret) {
+		return ret;
+	}
+	drm_helper_initial_config(rdev->ddev);
+	return 0;
+}
+
+void radeon_modeset_fini(struct radeon_device *rdev)
+{
+	if (rdev->mode_info.mode_config_initialized) {
+		drm_mode_config_cleanup(rdev->ddev);
+		rdev->mode_info.mode_config_initialized = false;
+	}
+}
+
+void radeon_init_disp_bandwidth(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_display_mode *modes[2];
+	int pixel_bytes[2];
+	struct drm_crtc *crtc;
+
+	pixel_bytes[0] = pixel_bytes[1] = 0;
+	modes[0] = modes[1] = NULL;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+		if (crtc->enabled && crtc->fb) {
+			modes[radeon_crtc->crtc_id] = &crtc->mode;
+			pixel_bytes[radeon_crtc->crtc_id] = crtc->fb->bits_per_pixel / 8;
+		}
+	}
+
+	if (ASIC_IS_AVIVO(rdev)) {
+		radeon_init_disp_bw_avivo(dev,
+					  modes[0],
+					  pixel_bytes[0],
+					  modes[1],
+					  pixel_bytes[1]);
+	} else {
+		radeon_init_disp_bw_legacy(dev,
+					   modes[0],
+					   pixel_bytes[0],
+					   modes[1],
+					   pixel_bytes[1]);
+	}
+}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 13a60f4d422..c815a2cbf7b 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -35,12 +35,92 @@
 #include "radeon_drv.h"
 
 #include "drm_pciids.h"
+#include <linux/console.h>
+
+
+#if defined(CONFIG_DRM_RADEON_KMS)
+/*
+ * KMS wrapper.
+ */
+#define KMS_DRIVER_MAJOR	2
+#define KMS_DRIVER_MINOR	0
+#define KMS_DRIVER_PATCHLEVEL	0
+int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
+int radeon_driver_unload_kms(struct drm_device *dev);
+int radeon_driver_firstopen_kms(struct drm_device *dev);
+void radeon_driver_lastclose_kms(struct drm_device *dev);
+int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv);
+void radeon_driver_postclose_kms(struct drm_device *dev,
+				 struct drm_file *file_priv);
+void radeon_driver_preclose_kms(struct drm_device *dev,
+				struct drm_file *file_priv);
+int radeon_suspend_kms(struct drm_device *dev, pm_message_t state);
+int radeon_resume_kms(struct drm_device *dev);
+u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc);
+int radeon_enable_vblank_kms(struct drm_device *dev, int crtc);
+void radeon_disable_vblank_kms(struct drm_device *dev, int crtc);
+void radeon_driver_irq_preinstall_kms(struct drm_device *dev);
+int radeon_driver_irq_postinstall_kms(struct drm_device *dev);
+void radeon_driver_irq_uninstall_kms(struct drm_device *dev);
+irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS);
+int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master);
+void radeon_master_destroy_kms(struct drm_device *dev,
+			       struct drm_master *master);
+int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+int radeon_gem_object_init(struct drm_gem_object *obj);
+void radeon_gem_object_free(struct drm_gem_object *obj);
+extern struct drm_ioctl_desc radeon_ioctls_kms[];
+extern int radeon_max_kms_ioctl;
+int radeon_mmap(struct file *filp, struct vm_area_struct *vma);
+#if defined(CONFIG_DEBUG_FS)
+int radeon_debugfs_init(struct drm_minor *minor);
+void radeon_debugfs_cleanup(struct drm_minor *minor);
+#endif
+#endif
+
 
 int radeon_no_wb;
+#if defined(CONFIG_DRM_RADEON_KMS)
+int radeon_modeset = -1;
+int radeon_dynclks = -1;
+int radeon_r4xx_atom = 0;
+int radeon_agpmode = 0;
+int radeon_vram_limit = 0;
+int radeon_gart_size = 512; /* default gart size */
+int radeon_benchmarking = 0;
+int radeon_connector_table = 0;
+#endif
 
 MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
 module_param_named(no_wb, radeon_no_wb, int, 0444);
 
+#if defined(CONFIG_DRM_RADEON_KMS)
+MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
+module_param_named(modeset, radeon_modeset, int, 0400);
+
+MODULE_PARM_DESC(dynclks, "Disable/Enable dynamic clocks");
+module_param_named(dynclks, radeon_dynclks, int, 0444);
+
+MODULE_PARM_DESC(r4xx_atom, "Enable ATOMBIOS modesetting for R4xx");
+module_param_named(r4xx_atom, radeon_r4xx_atom, int, 0444);
+
+MODULE_PARM_DESC(vramlimit, "Restrict VRAM for testing");
+module_param_named(vramlimit, radeon_vram_limit, int, 0600);
+
+MODULE_PARM_DESC(agpmode, "AGP Mode (-1 == PCI)");
+module_param_named(agpmode, radeon_agpmode, int, 0444);
+
+MODULE_PARM_DESC(gartsize, "Size of PCIE/IGP gart to setup in megabytes (32,64, etc)\n");
+module_param_named(gartsize, radeon_gart_size, int, 0600);
+
+MODULE_PARM_DESC(benchmark, "Run benchmark");
+module_param_named(benchmark, radeon_benchmarking, int, 0444);
+
+MODULE_PARM_DESC(connector_table, "Force connector table");
+module_param_named(connector_table, radeon_connector_table, int, 0444);
+#endif
+
 static int radeon_suspend(struct drm_device *dev, pm_message_t state)
 {
 	drm_radeon_private_t *dev_priv = dev->dev_private;
@@ -73,7 +153,11 @@ static struct pci_device_id pciidlist[] = {
 	radeon_PCI_IDS
 };
 
-static struct drm_driver driver = {
+#if defined(CONFIG_DRM_RADEON_KMS)
+MODULE_DEVICE_TABLE(pci, pciidlist);
+#endif
+
+static struct drm_driver driver_old = {
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
 	    DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED,
@@ -127,18 +211,141 @@ static struct drm_driver driver = {
 	.patchlevel = DRIVER_PATCHLEVEL,
 };
 
+#if defined(CONFIG_DRM_RADEON_KMS)
+static struct drm_driver kms_driver;
+
+static int __devinit
+radeon_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	return drm_get_dev(pdev, ent, &kms_driver);
+}
+
+static void
+radeon_pci_remove(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+
+	drm_put_dev(dev);
+}
+
+static int
+radeon_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	return radeon_suspend_kms(dev, state);
+}
+
+static int
+radeon_pci_resume(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	return radeon_resume_kms(dev);
+}
+
+static struct drm_driver kms_driver = {
+	.driver_features =
+	    DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
+	    DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED | DRIVER_GEM,
+	.dev_priv_size = 0,
+	.load = radeon_driver_load_kms,
+	.firstopen = radeon_driver_firstopen_kms,
+	.open = radeon_driver_open_kms,
+	.preclose = radeon_driver_preclose_kms,
+	.postclose = radeon_driver_postclose_kms,
+	.lastclose = radeon_driver_lastclose_kms,
+	.unload = radeon_driver_unload_kms,
+	.suspend = radeon_suspend_kms,
+	.resume = radeon_resume_kms,
+	.get_vblank_counter = radeon_get_vblank_counter_kms,
+	.enable_vblank = radeon_enable_vblank_kms,
+	.disable_vblank = radeon_disable_vblank_kms,
+	.master_create = radeon_master_create_kms,
+	.master_destroy = radeon_master_destroy_kms,
+#if defined(CONFIG_DEBUG_FS)
+	.debugfs_init = radeon_debugfs_init,
+	.debugfs_cleanup = radeon_debugfs_cleanup,
+#endif
+	.irq_preinstall = radeon_driver_irq_preinstall_kms,
+	.irq_postinstall = radeon_driver_irq_postinstall_kms,
+	.irq_uninstall = radeon_driver_irq_uninstall_kms,
+	.irq_handler = radeon_driver_irq_handler_kms,
+	.reclaim_buffers = drm_core_reclaim_buffers,
+	.get_map_ofs = drm_core_get_map_ofs,
+	.get_reg_ofs = drm_core_get_reg_ofs,
+	.ioctls = radeon_ioctls_kms,
+	.gem_init_object = radeon_gem_object_init,
+	.gem_free_object = radeon_gem_object_free,
+	.dma_ioctl = radeon_dma_ioctl_kms,
+	.fops = {
+		 .owner = THIS_MODULE,
+		 .open = drm_open,
+		 .release = drm_release,
+		 .ioctl = drm_ioctl,
+		 .mmap = radeon_mmap,
+		 .poll = drm_poll,
+		 .fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+		 .compat_ioctl = NULL,
+#endif
+	},
+
+	.pci_driver = {
+		 .name = DRIVER_NAME,
+		 .id_table = pciidlist,
+		 .probe = radeon_pci_probe,
+		 .remove = radeon_pci_remove,
+		 .suspend = radeon_pci_suspend,
+		 .resume = radeon_pci_resume,
+	},
+
+	.name = DRIVER_NAME,
+	.desc = DRIVER_DESC,
+	.date = DRIVER_DATE,
+	.major = KMS_DRIVER_MAJOR,
+	.minor = KMS_DRIVER_MINOR,
+	.patchlevel = KMS_DRIVER_PATCHLEVEL,
+};
+#endif
+
+static struct drm_driver *driver;
+
 static int __init radeon_init(void)
 {
-	driver.num_ioctls = radeon_max_ioctl;
-	return drm_init(&driver);
+	driver = &driver_old;
+	driver->num_ioctls = radeon_max_ioctl;
+#if defined(CONFIG_DRM_RADEON_KMS) && defined(CONFIG_X86)
+	/* if enabled by default */
+	if (radeon_modeset == -1) {
+		DRM_INFO("radeon default to kernel modesetting.\n");
+		radeon_modeset = 1;
+	}
+	if (radeon_modeset == 1) {
+		DRM_INFO("radeon kernel modesetting enabled.\n");
+		driver = &kms_driver;
+		driver->driver_features |= DRIVER_MODESET;
+		driver->num_ioctls = radeon_max_kms_ioctl;
+	}
+
+	/* if the vga console setting is enabled still
+	 * let modprobe override it */
+#ifdef CONFIG_VGA_CONSOLE
+	if (vgacon_text_force() && radeon_modeset == -1) {
+		DRM_INFO("VGACON disable radeon kernel modesetting.\n");
+		driver = &driver_old;
+		driver->driver_features &= ~DRIVER_MODESET;
+		radeon_modeset = 0;
+	}
+#endif
+#endif
+	return drm_init(driver);
 }
 
 static void __exit radeon_exit(void)
 {
-	drm_exit(&driver);
+	drm_exit(driver);
 }
 
-module_init(radeon_init);
+late_initcall(radeon_init);
 module_exit(radeon_exit);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
new file mode 100644
index 00000000000..c8ef0d14ffa
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -0,0 +1,1708 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+#include "atom.h"
+
+extern int atom_debug;
+
+uint32_t
+radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device, uint8_t dac)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t ret = 0;
+
+	switch (supported_device) {
+	case ATOM_DEVICE_CRT1_SUPPORT:
+	case ATOM_DEVICE_TV1_SUPPORT:
+	case ATOM_DEVICE_TV2_SUPPORT:
+	case ATOM_DEVICE_CRT2_SUPPORT:
+	case ATOM_DEVICE_CV_SUPPORT:
+		switch (dac) {
+		case 1: /* dac a */
+			if ((rdev->family == CHIP_RS300) ||
+			    (rdev->family == CHIP_RS400) ||
+			    (rdev->family == CHIP_RS480))
+				ret = ENCODER_OBJECT_ID_INTERNAL_DAC2;
+			else if (ASIC_IS_AVIVO(rdev))
+				ret = ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1;
+			else
+				ret = ENCODER_OBJECT_ID_INTERNAL_DAC1;
+			break;
+		case 2: /* dac b */
+			if (ASIC_IS_AVIVO(rdev))
+				ret = ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2;
+			else {
+				/*if (rdev->family == CHIP_R200)
+				  ret = ENCODER_OBJECT_ID_INTERNAL_DVO1;
+				  else*/
+				ret = ENCODER_OBJECT_ID_INTERNAL_DAC2;
+			}
+			break;
+		case 3: /* external dac */
+			if (ASIC_IS_AVIVO(rdev))
+				ret = ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1;
+			else
+				ret = ENCODER_OBJECT_ID_INTERNAL_DVO1;
+			break;
+		}
+		break;
+	case ATOM_DEVICE_LCD1_SUPPORT:
+		if (ASIC_IS_AVIVO(rdev))
+			ret = ENCODER_OBJECT_ID_INTERNAL_LVTM1;
+		else
+			ret = ENCODER_OBJECT_ID_INTERNAL_LVDS;
+		break;
+	case ATOM_DEVICE_DFP1_SUPPORT:
+		if ((rdev->family == CHIP_RS300) ||
+		    (rdev->family == CHIP_RS400) ||
+		    (rdev->family == CHIP_RS480))
+			ret = ENCODER_OBJECT_ID_INTERNAL_DVO1;
+		else if (ASIC_IS_AVIVO(rdev))
+			ret = ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1;
+		else
+			ret = ENCODER_OBJECT_ID_INTERNAL_TMDS1;
+		break;
+	case ATOM_DEVICE_LCD2_SUPPORT:
+	case ATOM_DEVICE_DFP2_SUPPORT:
+		if ((rdev->family == CHIP_RS600) ||
+		    (rdev->family == CHIP_RS690) ||
+		    (rdev->family == CHIP_RS740))
+			ret = ENCODER_OBJECT_ID_INTERNAL_DDI;
+		else if (ASIC_IS_AVIVO(rdev))
+			ret = ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1;
+		else
+			ret = ENCODER_OBJECT_ID_INTERNAL_DVO1;
+		break;
+	case ATOM_DEVICE_DFP3_SUPPORT:
+		ret = ENCODER_OBJECT_ID_INTERNAL_LVTM1;
+		break;
+	}
+
+	return ret;
+}
+
+void
+radeon_link_encoder_connector(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+	struct drm_encoder *encoder;
+	struct radeon_encoder *radeon_encoder;
+
+	/* walk the list and link encoders to connectors */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		radeon_connector = to_radeon_connector(connector);
+		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+			radeon_encoder = to_radeon_encoder(encoder);
+			if (radeon_encoder->devices & radeon_connector->devices)
+				drm_mode_connector_attach_encoder(connector, encoder);
+		}
+	}
+}
+
+static struct drm_connector *
+radeon_get_connector_for_encoder(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		radeon_connector = to_radeon_connector(connector);
+		if (radeon_encoder->devices & radeon_connector->devices)
+			return connector;
+	}
+	return NULL;
+}
+
+/* used for both atom and legacy */
+void radeon_rmx_mode_fixup(struct drm_encoder *encoder,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
+
+	if (mode->hdisplay < native_mode->panel_xres ||
+	    mode->vdisplay < native_mode->panel_yres) {
+		radeon_encoder->flags |= RADEON_USE_RMX;
+		if (ASIC_IS_AVIVO(rdev)) {
+			adjusted_mode->hdisplay = native_mode->panel_xres;
+			adjusted_mode->vdisplay = native_mode->panel_yres;
+			adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank;
+			adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus;
+			adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width;
+			adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank;
+			adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus;
+			adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width;
+			/* update crtc values */
+			drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+			/* adjust crtc values */
+			adjusted_mode->crtc_hdisplay = native_mode->panel_xres;
+			adjusted_mode->crtc_vdisplay = native_mode->panel_yres;
+			adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank;
+			adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus;
+			adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width;
+			adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank;
+			adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus;
+			adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width;
+		} else {
+			adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank;
+			adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus;
+			adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width;
+			adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank;
+			adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus;
+			adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width;
+			/* update crtc values */
+			drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+			/* adjust crtc values */
+			adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank;
+			adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus;
+			adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width;
+			adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank;
+			adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus;
+			adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width;
+		}
+		adjusted_mode->flags = native_mode->flags;
+		adjusted_mode->clock = native_mode->dotclock;
+	}
+}
+
+static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
+				   struct drm_display_mode *mode,
+				   struct drm_display_mode *adjusted_mode)
+{
+
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+
+	radeon_encoder->flags &= ~RADEON_USE_RMX;
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	if (radeon_encoder->rmx_type != RMX_OFF)
+		radeon_rmx_mode_fixup(encoder, mode, adjusted_mode);
+
+	/* hw bug */
+	if ((mode->flags & DRM_MODE_FLAG_INTERLACE)
+	    && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
+		adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
+
+	return true;
+}
+
+static void
+atombios_dac_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	DAC_ENCODER_CONTROL_PS_ALLOCATION args;
+	int index = 0, num = 0;
+	/* fixme - fill in enc_priv for atom dac */
+	enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+	memset(&args, 0, sizeof(args));
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+		index = GetIndexIntoMasterTable(COMMAND, DAC1EncoderControl);
+		num = 1;
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		index = GetIndexIntoMasterTable(COMMAND, DAC2EncoderControl);
+		num = 2;
+		break;
+	}
+
+	args.ucAction = action;
+
+	if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT))
+		args.ucDacStandard = ATOM_DAC1_PS2;
+	else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+		args.ucDacStandard = ATOM_DAC1_CV;
+	else {
+		switch (tv_std) {
+		case TV_STD_PAL:
+		case TV_STD_PAL_M:
+		case TV_STD_SCART_PAL:
+		case TV_STD_SECAM:
+		case TV_STD_PAL_CN:
+			args.ucDacStandard = ATOM_DAC1_PAL;
+			break;
+		case TV_STD_NTSC:
+		case TV_STD_NTSC_J:
+		case TV_STD_PAL_60:
+		default:
+			args.ucDacStandard = ATOM_DAC1_NTSC;
+			break;
+		}
+	}
+	args.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+static void
+atombios_tv_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	TV_ENCODER_CONTROL_PS_ALLOCATION args;
+	int index = 0;
+	/* fixme - fill in enc_priv for atom dac */
+	enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+	memset(&args, 0, sizeof(args));
+
+	index = GetIndexIntoMasterTable(COMMAND, TVEncoderControl);
+
+	args.sTVEncoder.ucAction = action;
+
+	if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+		args.sTVEncoder.ucTvStandard = ATOM_TV_CV;
+	else {
+		switch (tv_std) {
+		case TV_STD_NTSC:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
+			break;
+		case TV_STD_PAL:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL;
+			break;
+		case TV_STD_PAL_M:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PALM;
+			break;
+		case TV_STD_PAL_60:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL60;
+			break;
+		case TV_STD_NTSC_J:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSCJ;
+			break;
+		case TV_STD_SCART_PAL:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PAL; /* ??? */
+			break;
+		case TV_STD_SECAM:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_SECAM;
+			break;
+		case TV_STD_PAL_CN:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_PALCN;
+			break;
+		default:
+			args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
+			break;
+		}
+	}
+
+	args.sTVEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+void
+atombios_external_tmds_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION args;
+	int index = 0;
+
+	memset(&args, 0, sizeof(args));
+
+	index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
+
+	args.sXTmdsEncoder.ucEnable = action;
+
+	if (radeon_encoder->pixel_clock > 165000)
+		args.sXTmdsEncoder.ucMisc = PANEL_ENCODER_MISC_DUAL;
+
+	/*if (pScrn->rgbBits == 8)*/
+	args.sXTmdsEncoder.ucMisc |= (1 << 1);
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+static void
+atombios_ddia_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	DVO_ENCODER_CONTROL_PS_ALLOCATION args;
+	int index = 0;
+
+	memset(&args, 0, sizeof(args));
+
+	index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
+
+	args.sDVOEncoder.ucAction = action;
+	args.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+
+	if (radeon_encoder->pixel_clock > 165000)
+		args.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute = PANEL_ENCODER_MISC_DUAL;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+union lvds_encoder_control {
+	LVDS_ENCODER_CONTROL_PS_ALLOCATION    v1;
+	LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 v2;
+};
+
+static void
+atombios_digital_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	union lvds_encoder_control args;
+	int index = 0;
+	uint8_t frev, crev;
+	struct radeon_encoder_atom_dig *dig;
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+	struct radeon_connector_atom_dig *dig_connector;
+
+	connector = radeon_get_connector_for_encoder(encoder);
+	if (!connector)
+		return;
+
+	radeon_connector = to_radeon_connector(connector);
+
+	if (!radeon_encoder->enc_priv)
+		return;
+
+	dig = radeon_encoder->enc_priv;
+
+	if (!radeon_connector->con_priv)
+		return;
+
+	dig_connector = radeon_connector->con_priv;
+
+	memset(&args, 0, sizeof(args));
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+		index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+		index = GetIndexIntoMasterTable(COMMAND, TMDS1EncoderControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, LVDSEncoderControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, TMDS2EncoderControl);
+		break;
+	}
+
+	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+
+	switch (frev) {
+	case 1:
+	case 2:
+		switch (crev) {
+		case 1:
+			args.v1.ucMisc = 0;
+			args.v1.ucAction = action;
+			if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+				args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
+			args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+				if (dig->lvds_misc & (1 << 0))
+					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+				if (dig->lvds_misc & (1 << 1))
+					args.v1.ucMisc |= (1 << 1);
+			} else {
+				if (dig_connector->linkb)
+					args.v1.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+				/*if (pScrn->rgbBits == 8) */
+				args.v1.ucMisc |= (1 << 1);
+			}
+			break;
+		case 2:
+		case 3:
+			args.v2.ucMisc = 0;
+			args.v2.ucAction = action;
+			if (crev == 3) {
+				if (dig->coherent_mode)
+					args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT;
+			}
+			if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+				args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
+			args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			args.v2.ucTruncate = 0;
+			args.v2.ucSpatial = 0;
+			args.v2.ucTemporal = 0;
+			args.v2.ucFRC = 0;
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+				if (dig->lvds_misc & (1 << 0))
+					args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+				if (dig->lvds_misc & (1 << 5)) {
+					args.v2.ucSpatial = PANEL_ENCODER_SPATIAL_DITHER_EN;
+					if (dig->lvds_misc & (1 << 1))
+						args.v2.ucSpatial |= PANEL_ENCODER_SPATIAL_DITHER_DEPTH;
+				}
+				if (dig->lvds_misc & (1 << 6)) {
+					args.v2.ucTemporal = PANEL_ENCODER_TEMPORAL_DITHER_EN;
+					if (dig->lvds_misc & (1 << 1))
+						args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_DITHER_DEPTH;
+					if (((dig->lvds_misc >> 2) & 0x3) == 2)
+						args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_LEVEL_4;
+				}
+			} else {
+				if (dig_connector->linkb)
+					args.v2.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL;
+			}
+			break;
+		default:
+			DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+			break;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+		break;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+int
+atombios_get_encoder_mode(struct drm_encoder *encoder)
+{
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+
+	connector = radeon_get_connector_for_encoder(encoder);
+	if (!connector)
+		return 0;
+
+	radeon_connector = to_radeon_connector(connector);
+
+	switch (connector->connector_type) {
+	case DRM_MODE_CONNECTOR_DVII:
+		if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+			return ATOM_ENCODER_MODE_HDMI;
+		else if (radeon_connector->use_digital)
+			return ATOM_ENCODER_MODE_DVI;
+		else
+			return ATOM_ENCODER_MODE_CRT;
+		break;
+	case DRM_MODE_CONNECTOR_DVID:
+	case DRM_MODE_CONNECTOR_HDMIA:
+	case DRM_MODE_CONNECTOR_HDMIB:
+	default:
+		if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+			return ATOM_ENCODER_MODE_HDMI;
+		else
+			return ATOM_ENCODER_MODE_DVI;
+		break;
+	case DRM_MODE_CONNECTOR_LVDS:
+		return ATOM_ENCODER_MODE_LVDS;
+		break;
+	case DRM_MODE_CONNECTOR_DisplayPort:
+		/*if (radeon_output->MonType == MT_DP)
+		  return ATOM_ENCODER_MODE_DP;
+		  else*/
+		if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+			return ATOM_ENCODER_MODE_HDMI;
+		else
+			return ATOM_ENCODER_MODE_DVI;
+		break;
+	case CONNECTOR_DVI_A:
+	case CONNECTOR_VGA:
+		return ATOM_ENCODER_MODE_CRT;
+		break;
+	case CONNECTOR_STV:
+	case CONNECTOR_CTV:
+	case CONNECTOR_DIN:
+		/* fix me */
+		return ATOM_ENCODER_MODE_TV;
+		/*return ATOM_ENCODER_MODE_CV;*/
+		break;
+	}
+}
+
+static void
+atombios_dig_encoder_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	DIG_ENCODER_CONTROL_PS_ALLOCATION args;
+	int index = 0, num = 0;
+	uint8_t frev, crev;
+	struct radeon_encoder_atom_dig *dig;
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+	struct radeon_connector_atom_dig *dig_connector;
+
+	connector = radeon_get_connector_for_encoder(encoder);
+	if (!connector)
+		return;
+
+	radeon_connector = to_radeon_connector(connector);
+
+	if (!radeon_connector->con_priv)
+		return;
+
+	dig_connector = radeon_connector->con_priv;
+
+	if (!radeon_encoder->enc_priv)
+		return;
+
+	dig = radeon_encoder->enc_priv;
+
+	memset(&args, 0, sizeof(args));
+
+	if (ASIC_IS_DCE32(rdev)) {
+		if (dig->dig_block)
+			index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
+		num = dig->dig_block + 1;
+	} else {
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+			index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
+			num = 1;
+			break;
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+			index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
+			num = 2;
+			break;
+		}
+	}
+
+	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+
+	args.ucAction = action;
+	args.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+
+	if (ASIC_IS_DCE32(rdev)) {
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+			args.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER1;
+			break;
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+			args.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER2;
+			break;
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+			args.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER3;
+			break;
+		}
+	} else {
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+			args.ucConfig = ATOM_ENCODER_CONFIG_TRANSMITTER1;
+			break;
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+			args.ucConfig = ATOM_ENCODER_CONFIG_TRANSMITTER2;
+			break;
+		}
+	}
+
+	if (radeon_encoder->pixel_clock > 165000) {
+		args.ucConfig |= ATOM_ENCODER_CONFIG_LINKA_B;
+		args.ucLaneNum = 8;
+	} else {
+		if (dig_connector->linkb)
+			args.ucConfig |= ATOM_ENCODER_CONFIG_LINKB;
+		else
+			args.ucConfig |= ATOM_ENCODER_CONFIG_LINKA;
+		args.ucLaneNum = 4;
+	}
+
+	args.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+union dig_transmitter_control {
+	DIG_TRANSMITTER_CONTROL_PS_ALLOCATION v1;
+	DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 v2;
+};
+
+static void
+atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	union dig_transmitter_control args;
+	int index = 0, num = 0;
+	uint8_t frev, crev;
+	struct radeon_encoder_atom_dig *dig;
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
+	struct radeon_connector_atom_dig *dig_connector;
+
+	connector = radeon_get_connector_for_encoder(encoder);
+	if (!connector)
+		return;
+
+	radeon_connector = to_radeon_connector(connector);
+
+	if (!radeon_encoder->enc_priv)
+		return;
+
+	dig = radeon_encoder->enc_priv;
+
+	if (!radeon_connector->con_priv)
+		return;
+
+	dig_connector = radeon_connector->con_priv;
+
+	memset(&args, 0, sizeof(args));
+
+	if (ASIC_IS_DCE32(rdev))
+		index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
+	else {
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+			index = GetIndexIntoMasterTable(COMMAND, DIG1TransmitterControl);
+			break;
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+			index = GetIndexIntoMasterTable(COMMAND, DIG2TransmitterControl);
+			break;
+		}
+	}
+
+	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+
+	args.v1.ucAction = action;
+
+	if (ASIC_IS_DCE32(rdev)) {
+		if (radeon_encoder->pixel_clock > 165000) {
+			args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 2) / 100);
+			args.v2.acConfig.fDualLinkConnector = 1;
+		} else {
+			args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 4) / 100);
+		}
+		if (dig->dig_block)
+			args.v2.acConfig.ucEncoderSel = 1;
+
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+			args.v2.acConfig.ucTransmitterSel = 0;
+			num = 0;
+			break;
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+			args.v2.acConfig.ucTransmitterSel = 1;
+			num = 1;
+			break;
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+			args.v2.acConfig.ucTransmitterSel = 2;
+			num = 2;
+			break;
+		}
+
+		if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+			if (dig->coherent_mode)
+				args.v2.acConfig.fCoherentMode = 1;
+		}
+	} else {
+		args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
+		args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock) / 10);
+
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
+			if (rdev->flags & RADEON_IS_IGP) {
+				if (radeon_encoder->pixel_clock > 165000) {
+					args.v1.ucConfig |= (ATOM_TRANSMITTER_CONFIG_8LANE_LINK |
+							     ATOM_TRANSMITTER_CONFIG_LINKA_B);
+					if (dig_connector->igp_lane_info & 0x3)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_7;
+					else if (dig_connector->igp_lane_info & 0xc)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_15;
+				} else {
+					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKA;
+					if (dig_connector->igp_lane_info & 0x1)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_3;
+					else if (dig_connector->igp_lane_info & 0x2)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_4_7;
+					else if (dig_connector->igp_lane_info & 0x4)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_11;
+					else if (dig_connector->igp_lane_info & 0x8)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_12_15;
+				}
+			} else {
+				if (radeon_encoder->pixel_clock > 165000)
+					args.v1.ucConfig |= (ATOM_TRANSMITTER_CONFIG_8LANE_LINK |
+							     ATOM_TRANSMITTER_CONFIG_LINKA_B |
+							     ATOM_TRANSMITTER_CONFIG_LANE_0_7);
+				else {
+					if (dig_connector->linkb)
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKB | ATOM_TRANSMITTER_CONFIG_LANE_0_3;
+					else
+						args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKA | ATOM_TRANSMITTER_CONFIG_LANE_0_3;
+				}
+			}
+			break;
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
+			if (radeon_encoder->pixel_clock > 165000)
+				args.v1.ucConfig |= (ATOM_TRANSMITTER_CONFIG_8LANE_LINK |
+						     ATOM_TRANSMITTER_CONFIG_LINKA_B |
+						     ATOM_TRANSMITTER_CONFIG_LANE_0_7);
+			else {
+				if (dig_connector->linkb)
+					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKB | ATOM_TRANSMITTER_CONFIG_LANE_0_3;
+				else
+					args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKA | ATOM_TRANSMITTER_CONFIG_LANE_0_3;
+			}
+			break;
+		}
+
+		if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+			if (dig->coherent_mode)
+				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
+		}
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+static void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
+{
+
+	WREG32(0x659C, 0x0);
+	WREG32(0x6594, 0x705);
+	WREG32(0x65A4, 0x10001);
+	WREG32(0x65D8, 0x0);
+	WREG32(0x65B0, 0x0);
+	WREG32(0x65C0, 0x0);
+	WREG32(0x65D4, 0x0);
+	WREG32(0x6578, 0x0);
+	WREG32(0x657C, 0x841880A8);
+	WREG32(0x6578, 0x1);
+	WREG32(0x657C, 0x84208680);
+	WREG32(0x6578, 0x2);
+	WREG32(0x657C, 0xBFF880B0);
+	WREG32(0x6578, 0x100);
+	WREG32(0x657C, 0x83D88088);
+	WREG32(0x6578, 0x101);
+	WREG32(0x657C, 0x84608680);
+	WREG32(0x6578, 0x102);
+	WREG32(0x657C, 0xBFF080D0);
+	WREG32(0x6578, 0x200);
+	WREG32(0x657C, 0x83988068);
+	WREG32(0x6578, 0x201);
+	WREG32(0x657C, 0x84A08680);
+	WREG32(0x6578, 0x202);
+	WREG32(0x657C, 0xBFF080F8);
+	WREG32(0x6578, 0x300);
+	WREG32(0x657C, 0x83588058);
+	WREG32(0x6578, 0x301);
+	WREG32(0x657C, 0x84E08660);
+	WREG32(0x6578, 0x302);
+	WREG32(0x657C, 0xBFF88120);
+	WREG32(0x6578, 0x400);
+	WREG32(0x657C, 0x83188040);
+	WREG32(0x6578, 0x401);
+	WREG32(0x657C, 0x85008660);
+	WREG32(0x6578, 0x402);
+	WREG32(0x657C, 0xBFF88150);
+	WREG32(0x6578, 0x500);
+	WREG32(0x657C, 0x82D88030);
+	WREG32(0x6578, 0x501);
+	WREG32(0x657C, 0x85408640);
+	WREG32(0x6578, 0x502);
+	WREG32(0x657C, 0xBFF88180);
+	WREG32(0x6578, 0x600);
+	WREG32(0x657C, 0x82A08018);
+	WREG32(0x6578, 0x601);
+	WREG32(0x657C, 0x85808620);
+	WREG32(0x6578, 0x602);
+	WREG32(0x657C, 0xBFF081B8);
+	WREG32(0x6578, 0x700);
+	WREG32(0x657C, 0x82608010);
+	WREG32(0x6578, 0x701);
+	WREG32(0x657C, 0x85A08600);
+	WREG32(0x6578, 0x702);
+	WREG32(0x657C, 0x800081F0);
+	WREG32(0x6578, 0x800);
+	WREG32(0x657C, 0x8228BFF8);
+	WREG32(0x6578, 0x801);
+	WREG32(0x657C, 0x85E085E0);
+	WREG32(0x6578, 0x802);
+	WREG32(0x657C, 0xBFF88228);
+	WREG32(0x6578, 0x10000);
+	WREG32(0x657C, 0x82A8BF00);
+	WREG32(0x6578, 0x10001);
+	WREG32(0x657C, 0x82A08CC0);
+	WREG32(0x6578, 0x10002);
+	WREG32(0x657C, 0x8008BEF8);
+	WREG32(0x6578, 0x10100);
+	WREG32(0x657C, 0x81F0BF28);
+	WREG32(0x6578, 0x10101);
+	WREG32(0x657C, 0x83608CA0);
+	WREG32(0x6578, 0x10102);
+	WREG32(0x657C, 0x8018BED0);
+	WREG32(0x6578, 0x10200);
+	WREG32(0x657C, 0x8148BF38);
+	WREG32(0x6578, 0x10201);
+	WREG32(0x657C, 0x84408C80);
+	WREG32(0x6578, 0x10202);
+	WREG32(0x657C, 0x8008BEB8);
+	WREG32(0x6578, 0x10300);
+	WREG32(0x657C, 0x80B0BF78);
+	WREG32(0x6578, 0x10301);
+	WREG32(0x657C, 0x85008C20);
+	WREG32(0x6578, 0x10302);
+	WREG32(0x657C, 0x8020BEA0);
+	WREG32(0x6578, 0x10400);
+	WREG32(0x657C, 0x8028BF90);
+	WREG32(0x6578, 0x10401);
+	WREG32(0x657C, 0x85E08BC0);
+	WREG32(0x6578, 0x10402);
+	WREG32(0x657C, 0x8018BE90);
+	WREG32(0x6578, 0x10500);
+	WREG32(0x657C, 0xBFB8BFB0);
+	WREG32(0x6578, 0x10501);
+	WREG32(0x657C, 0x86C08B40);
+	WREG32(0x6578, 0x10502);
+	WREG32(0x657C, 0x8010BE90);
+	WREG32(0x6578, 0x10600);
+	WREG32(0x657C, 0xBF58BFC8);
+	WREG32(0x6578, 0x10601);
+	WREG32(0x657C, 0x87A08AA0);
+	WREG32(0x6578, 0x10602);
+	WREG32(0x657C, 0x8010BE98);
+	WREG32(0x6578, 0x10700);
+	WREG32(0x657C, 0xBF10BFF0);
+	WREG32(0x6578, 0x10701);
+	WREG32(0x657C, 0x886089E0);
+	WREG32(0x6578, 0x10702);
+	WREG32(0x657C, 0x8018BEB0);
+	WREG32(0x6578, 0x10800);
+	WREG32(0x657C, 0xBED8BFE8);
+	WREG32(0x6578, 0x10801);
+	WREG32(0x657C, 0x89408940);
+	WREG32(0x6578, 0x10802);
+	WREG32(0x657C, 0xBFE8BED8);
+	WREG32(0x6578, 0x20000);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20001);
+	WREG32(0x657C, 0x90008000);
+	WREG32(0x6578, 0x20002);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20003);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20100);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20101);
+	WREG32(0x657C, 0x8FE0BF70);
+	WREG32(0x6578, 0x20102);
+	WREG32(0x657C, 0xBFE880C0);
+	WREG32(0x6578, 0x20103);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20200);
+	WREG32(0x657C, 0x8018BFF8);
+	WREG32(0x6578, 0x20201);
+	WREG32(0x657C, 0x8F80BF08);
+	WREG32(0x6578, 0x20202);
+	WREG32(0x657C, 0xBFD081A0);
+	WREG32(0x6578, 0x20203);
+	WREG32(0x657C, 0xBFF88000);
+	WREG32(0x6578, 0x20300);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20301);
+	WREG32(0x657C, 0x8EE0BEC0);
+	WREG32(0x6578, 0x20302);
+	WREG32(0x657C, 0xBFB082A0);
+	WREG32(0x6578, 0x20303);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20400);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20401);
+	WREG32(0x657C, 0x8E00BEA0);
+	WREG32(0x6578, 0x20402);
+	WREG32(0x657C, 0xBF8883C0);
+	WREG32(0x6578, 0x20403);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20500);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20501);
+	WREG32(0x657C, 0x8D00BE90);
+	WREG32(0x6578, 0x20502);
+	WREG32(0x657C, 0xBF588500);
+	WREG32(0x6578, 0x20503);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20600);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20601);
+	WREG32(0x657C, 0x8BC0BE98);
+	WREG32(0x6578, 0x20602);
+	WREG32(0x657C, 0xBF308660);
+	WREG32(0x6578, 0x20603);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20700);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20701);
+	WREG32(0x657C, 0x8A80BEB0);
+	WREG32(0x6578, 0x20702);
+	WREG32(0x657C, 0xBF0087C0);
+	WREG32(0x6578, 0x20703);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20800);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20801);
+	WREG32(0x657C, 0x8920BED0);
+	WREG32(0x6578, 0x20802);
+	WREG32(0x657C, 0xBED08920);
+	WREG32(0x6578, 0x20803);
+	WREG32(0x657C, 0x80008010);
+	WREG32(0x6578, 0x30000);
+	WREG32(0x657C, 0x90008000);
+	WREG32(0x6578, 0x30001);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x30100);
+	WREG32(0x657C, 0x8FE0BF90);
+	WREG32(0x6578, 0x30101);
+	WREG32(0x657C, 0xBFF880A0);
+	WREG32(0x6578, 0x30200);
+	WREG32(0x657C, 0x8F60BF40);
+	WREG32(0x6578, 0x30201);
+	WREG32(0x657C, 0xBFE88180);
+	WREG32(0x6578, 0x30300);
+	WREG32(0x657C, 0x8EC0BF00);
+	WREG32(0x6578, 0x30301);
+	WREG32(0x657C, 0xBFC88280);
+	WREG32(0x6578, 0x30400);
+	WREG32(0x657C, 0x8DE0BEE0);
+	WREG32(0x6578, 0x30401);
+	WREG32(0x657C, 0xBFA083A0);
+	WREG32(0x6578, 0x30500);
+	WREG32(0x657C, 0x8CE0BED0);
+	WREG32(0x6578, 0x30501);
+	WREG32(0x657C, 0xBF7884E0);
+	WREG32(0x6578, 0x30600);
+	WREG32(0x657C, 0x8BA0BED8);
+	WREG32(0x6578, 0x30601);
+	WREG32(0x657C, 0xBF508640);
+	WREG32(0x6578, 0x30700);
+	WREG32(0x657C, 0x8A60BEE8);
+	WREG32(0x6578, 0x30701);
+	WREG32(0x657C, 0xBF2087A0);
+	WREG32(0x6578, 0x30800);
+	WREG32(0x657C, 0x8900BF00);
+	WREG32(0x6578, 0x30801);
+	WREG32(0x657C, 0xBF008900);
+}
+
+static void
+atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	ENABLE_YUV_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, EnableYUV);
+	uint32_t temp, reg;
+
+	memset(&args, 0, sizeof(args));
+
+	if (rdev->family >= CHIP_R600)
+		reg = R600_BIOS_3_SCRATCH;
+	else
+		reg = RADEON_BIOS_3_SCRATCH;
+
+	/* XXX: fix up scratch reg handling */
+	temp = RREG32(reg);
+	if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT))
+		WREG32(reg, (ATOM_S3_TV1_ACTIVE |
+			     (radeon_crtc->crtc_id << 18)));
+	else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+		WREG32(reg, (ATOM_S3_CV_ACTIVE | (radeon_crtc->crtc_id << 24)));
+	else
+		WREG32(reg, 0);
+
+	if (enable)
+		args.ucEnable = ATOM_ENABLE;
+	args.ucCRTC = radeon_crtc->crtc_id;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+	WREG32(reg, temp);
+}
+
+static void
+atombios_overscan_setup(struct drm_encoder *encoder,
+			struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	SET_CRTC_OVERSCAN_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
+
+	memset(&args, 0, sizeof(args));
+
+	args.usOverscanRight = 0;
+	args.usOverscanLeft = 0;
+	args.usOverscanBottom = 0;
+	args.usOverscanTop = 0;
+	args.ucCRTC = radeon_crtc->crtc_id;
+
+	if (radeon_encoder->flags & RADEON_USE_RMX) {
+		if (radeon_encoder->rmx_type == RMX_FULL) {
+			args.usOverscanRight = 0;
+			args.usOverscanLeft = 0;
+			args.usOverscanBottom = 0;
+			args.usOverscanTop = 0;
+		} else if (radeon_encoder->rmx_type == RMX_CENTER) {
+			args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+			args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+			args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+			args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+		} else if (radeon_encoder->rmx_type == RMX_ASPECT) {
+			int a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
+			int a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
+
+			if (a1 > a2) {
+				args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+				args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+			} else if (a2 > a1) {
+				args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+				args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+			}
+		}
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+static void
+atombios_scaler_setup(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	ENABLE_SCALER_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
+	/* fixme - fill in enc_priv for atom dac */
+	enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+	if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
+		return;
+
+	memset(&args, 0, sizeof(args));
+
+	args.ucScaler = radeon_crtc->crtc_id;
+
+	if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) {
+		switch (tv_std) {
+		case TV_STD_NTSC:
+		default:
+			args.ucTVStandard = ATOM_TV_NTSC;
+			break;
+		case TV_STD_PAL:
+			args.ucTVStandard = ATOM_TV_PAL;
+			break;
+		case TV_STD_PAL_M:
+			args.ucTVStandard = ATOM_TV_PALM;
+			break;
+		case TV_STD_PAL_60:
+			args.ucTVStandard = ATOM_TV_PAL60;
+			break;
+		case TV_STD_NTSC_J:
+			args.ucTVStandard = ATOM_TV_NTSCJ;
+			break;
+		case TV_STD_SCART_PAL:
+			args.ucTVStandard = ATOM_TV_PAL; /* ??? */
+			break;
+		case TV_STD_SECAM:
+			args.ucTVStandard = ATOM_TV_SECAM;
+			break;
+		case TV_STD_PAL_CN:
+			args.ucTVStandard = ATOM_TV_PALCN;
+			break;
+		}
+		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+	} else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT)) {
+		args.ucTVStandard = ATOM_TV_CV;
+		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+	} else if (radeon_encoder->flags & RADEON_USE_RMX) {
+		if (radeon_encoder->rmx_type == RMX_FULL)
+			args.ucEnable = ATOM_SCALER_EXPANSION;
+		else if (radeon_encoder->rmx_type == RMX_CENTER)
+			args.ucEnable = ATOM_SCALER_CENTER;
+		else if (radeon_encoder->rmx_type == RMX_ASPECT)
+			args.ucEnable = ATOM_SCALER_EXPANSION;
+	} else {
+		if (ASIC_IS_AVIVO(rdev))
+			args.ucEnable = ATOM_SCALER_DISABLE;
+		else
+			args.ucEnable = ATOM_SCALER_CENTER;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+	if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
+	    && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
+		atom_rv515_force_tv_scaler(rdev);
+	}
+
+}
+
+static void
+radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
+	int index = 0;
+	bool is_dig = false;
+
+	memset(&args, 0, sizeof(args));
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+		index = GetIndexIntoMasterTable(COMMAND, TMDSAOutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+		is_dig = true;
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+		index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, LVTMAOutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+		if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
+		else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
+		else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+			index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
+		else
+			index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl);
+		break;
+	}
+
+	if (is_dig) {
+		switch (mode) {
+		case DRM_MODE_DPMS_ON:
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE);
+			break;
+		case DRM_MODE_DPMS_STANDBY:
+		case DRM_MODE_DPMS_SUSPEND:
+		case DRM_MODE_DPMS_OFF:
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE);
+			break;
+		}
+	} else {
+		switch (mode) {
+		case DRM_MODE_DPMS_ON:
+			args.ucAction = ATOM_ENABLE;
+			break;
+		case DRM_MODE_DPMS_STANDBY:
+		case DRM_MODE_DPMS_SUSPEND:
+		case DRM_MODE_DPMS_OFF:
+			args.ucAction = ATOM_DISABLE;
+			break;
+		}
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+	}
+	radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+}
+
+union crtc_sourc_param {
+	SELECT_CRTC_SOURCE_PS_ALLOCATION v1;
+	SELECT_CRTC_SOURCE_PARAMETERS_V2 v2;
+};
+
+static void
+atombios_set_encoder_crtc_source(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	union crtc_sourc_param args;
+	int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source);
+	uint8_t frev, crev;
+
+	memset(&args, 0, sizeof(args));
+
+	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+
+	switch (frev) {
+	case 1:
+		switch (crev) {
+		case 1:
+		default:
+			if (ASIC_IS_AVIVO(rdev))
+				args.v1.ucCRTC = radeon_crtc->crtc_id;
+			else {
+				if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) {
+					args.v1.ucCRTC = radeon_crtc->crtc_id;
+				} else {
+					args.v1.ucCRTC = radeon_crtc->crtc_id << 2;
+				}
+			}
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+				args.v1.ucDevice = ATOM_DEVICE_DFP1_INDEX;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+			case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+				if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT)
+					args.v1.ucDevice = ATOM_DEVICE_LCD1_INDEX;
+				else
+					args.v1.ucDevice = ATOM_DEVICE_DFP3_INDEX;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+			case ENCODER_OBJECT_ID_INTERNAL_DDI:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+				args.v1.ucDevice = ATOM_DEVICE_DFP2_INDEX;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+				if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT))
+					args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
+				else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+					args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
+				else
+					args.v1.ucDevice = ATOM_DEVICE_CRT1_INDEX;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+				if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT))
+					args.v1.ucDevice = ATOM_DEVICE_TV1_INDEX;
+				else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+					args.v1.ucDevice = ATOM_DEVICE_CV_INDEX;
+				else
+					args.v1.ucDevice = ATOM_DEVICE_CRT2_INDEX;
+				break;
+			}
+			break;
+		case 2:
+			args.v2.ucCRTC = radeon_crtc->crtc_id;
+			args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+			switch (radeon_encoder->encoder_id) {
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+				if (ASIC_IS_DCE32(rdev)) {
+					if (radeon_crtc->crtc_id)
+						args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
+					else
+						args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
+				} else
+					args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+				args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+				args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+				if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT))
+					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+				else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+				else
+					args.v2.ucEncoderID = ASIC_INT_DAC1_ENCODER_ID;
+				break;
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+				if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT))
+					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+				else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT))
+					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
+				else
+					args.v2.ucEncoderID = ASIC_INT_DAC2_ENCODER_ID;
+				break;
+			}
+			break;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+		break;
+	}
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+}
+
+static void
+atombios_apply_encoder_quirks(struct drm_encoder *encoder,
+			      struct drm_display_mode *mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+
+	/* Funky macbooks */
+	if ((dev->pdev->device == 0x71C5) &&
+	    (dev->pdev->subsystem_vendor == 0x106b) &&
+	    (dev->pdev->subsystem_device == 0x0080)) {
+		if (radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) {
+			uint32_t lvtma_bit_depth_control = RREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL);
+
+			lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_EN;
+			lvtma_bit_depth_control &= ~AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN;
+
+			WREG32(AVIVO_LVTMA_BIT_DEPTH_CONTROL, lvtma_bit_depth_control);
+		}
+	}
+
+	/* set scaler clears this on some chips */
+	if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE))
+		WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, AVIVO_D1MODE_INTERLEAVE_EN);
+}
+
+static void
+radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
+			     struct drm_display_mode *mode,
+			     struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+
+	if (radeon_encoder->enc_priv) {
+		struct radeon_encoder_atom_dig *dig;
+
+		dig = radeon_encoder->enc_priv;
+		dig->dig_block = radeon_crtc->crtc_id;
+	}
+	radeon_encoder->pixel_clock = adjusted_mode->clock;
+
+	radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+	atombios_overscan_setup(encoder, mode, adjusted_mode);
+	atombios_scaler_setup(encoder);
+	atombios_set_encoder_crtc_source(encoder);
+
+	if (ASIC_IS_AVIVO(rdev)) {
+		if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
+			atombios_yuv_setup(encoder, true);
+		else
+			atombios_yuv_setup(encoder, false);
+	}
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		atombios_digital_setup(encoder, PANEL_ENCODER_ACTION_ENABLE);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+		/* disable the encoder and transmitter */
+		atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE);
+		atombios_dig_encoder_setup(encoder, ATOM_DISABLE);
+
+		/* setup and enable the encoder and transmitter */
+		atombios_dig_encoder_setup(encoder, ATOM_ENABLE);
+		atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP);
+		atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+		atombios_ddia_setup(encoder, ATOM_ENABLE);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		atombios_external_tmds_setup(encoder, ATOM_ENABLE);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		atombios_dac_setup(encoder, ATOM_ENABLE);
+		if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
+			atombios_tv_setup(encoder, ATOM_ENABLE);
+		break;
+	}
+	atombios_apply_encoder_quirks(encoder, adjusted_mode);
+}
+
+static bool
+atombios_dac_load_detect(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+
+	if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT |
+				       ATOM_DEVICE_CV_SUPPORT |
+				       ATOM_DEVICE_CRT_SUPPORT)) {
+		DAC_LOAD_DETECTION_PS_ALLOCATION args;
+		int index = GetIndexIntoMasterTable(COMMAND, DAC_LoadDetection);
+		uint8_t frev, crev;
+
+		memset(&args, 0, sizeof(args));
+
+		atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+
+		args.sDacload.ucMisc = 0;
+
+		if ((radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DAC1) ||
+		    (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1))
+			args.sDacload.ucDacType = ATOM_DAC_A;
+		else
+			args.sDacload.ucDacType = ATOM_DAC_B;
+
+		if (radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT)
+			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT1_SUPPORT);
+		else if (radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT)
+			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CRT2_SUPPORT);
+		else if (radeon_encoder->devices & ATOM_DEVICE_CV_SUPPORT) {
+			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_CV_SUPPORT);
+			if (crev >= 3)
+				args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
+		} else if (radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) {
+			args.sDacload.usDeviceID = cpu_to_le16(ATOM_DEVICE_TV1_SUPPORT);
+			if (crev >= 3)
+				args.sDacload.ucMisc = DAC_LOAD_MISC_YPrPb;
+		}
+
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+		return true;
+	} else
+		return false;
+}
+
+static enum drm_connector_status
+radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t bios_0_scratch;
+
+	if (!atombios_dac_load_detect(encoder)) {
+		DRM_DEBUG("detect returned false \n");
+		return connector_status_unknown;
+	}
+
+	if (rdev->family >= CHIP_R600)
+		bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
+	else
+		bios_0_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
+
+	DRM_DEBUG("Bios 0 scratch %x\n", bios_0_scratch);
+	if (radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+		if (bios_0_scratch & ATOM_S0_CRT1_MASK)
+			return connector_status_connected;
+	} else if (radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+		if (bios_0_scratch & ATOM_S0_CRT2_MASK)
+			return connector_status_connected;
+	} else if (radeon_encoder->devices & ATOM_DEVICE_CV_SUPPORT) {
+		if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
+			return connector_status_connected;
+	} else if (radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) {
+		if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
+			return connector_status_connected; /* CTV */
+		else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
+			return connector_status_connected; /* STV */
+	}
+	return connector_status_disconnected;
+}
+
+static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
+{
+	radeon_atom_output_lock(encoder, true);
+	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
+{
+	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
+	radeon_atom_output_lock(encoder, false);
+}
+
+static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = {
+	.dpms = radeon_atom_encoder_dpms,
+	.mode_fixup = radeon_atom_mode_fixup,
+	.prepare = radeon_atom_encoder_prepare,
+	.mode_set = radeon_atom_encoder_mode_set,
+	.commit = radeon_atom_encoder_commit,
+	/* no detect for TMDS/LVDS yet */
+};
+
+static const struct drm_encoder_helper_funcs radeon_atom_dac_helper_funcs = {
+	.dpms = radeon_atom_encoder_dpms,
+	.mode_fixup = radeon_atom_mode_fixup,
+	.prepare = radeon_atom_encoder_prepare,
+	.mode_set = radeon_atom_encoder_mode_set,
+	.commit = radeon_atom_encoder_commit,
+	.detect = radeon_atom_dac_detect,
+};
+
+void radeon_enc_destroy(struct drm_encoder *encoder)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	kfree(radeon_encoder->enc_priv);
+	drm_encoder_cleanup(encoder);
+	kfree(radeon_encoder);
+}
+
+static const struct drm_encoder_funcs radeon_atom_enc_funcs = {
+	.destroy = radeon_enc_destroy,
+};
+
+struct radeon_encoder_atom_dig *
+radeon_atombios_set_dig_info(struct radeon_encoder *radeon_encoder)
+{
+	struct radeon_encoder_atom_dig *dig = kzalloc(sizeof(struct radeon_encoder_atom_dig), GFP_KERNEL);
+
+	if (!dig)
+		return NULL;
+
+	/* coherent mode by default */
+	dig->coherent_mode = true;
+
+	return dig;
+}
+
+void
+radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t supported_device)
+{
+	struct drm_encoder *encoder;
+	struct radeon_encoder *radeon_encoder;
+
+	/* see if we already added it */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		radeon_encoder = to_radeon_encoder(encoder);
+		if (radeon_encoder->encoder_id == encoder_id) {
+			radeon_encoder->devices |= supported_device;
+			return;
+		}
+
+	}
+
+	/* add a new one */
+	radeon_encoder = kzalloc(sizeof(struct radeon_encoder), GFP_KERNEL);
+	if (!radeon_encoder)
+		return;
+
+	encoder = &radeon_encoder->base;
+	encoder->possible_crtcs = 0x3;
+	encoder->possible_clones = 0;
+
+	radeon_encoder->enc_priv = NULL;
+
+	radeon_encoder->encoder_id = encoder_id;
+	radeon_encoder->devices = supported_device;
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+			radeon_encoder->rmx_type = RMX_FULL;
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+			radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+		} else {
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+		}
+		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+		drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+		drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TVDAC);
+		drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+		drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+		radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
+		break;
+	}
+}
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
new file mode 100644
index 00000000000..fa86d398945
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -0,0 +1,825 @@
+/*
+ * Copyright © 2007 David Airlie
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *     David Airlie
+ */
+    /*
+     *  Modularization
+     */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+
+struct radeon_fb_device {
+	struct radeon_device		*rdev;
+	struct drm_display_mode		*mode;
+	struct radeon_framebuffer	*rfb;
+	int				crtc_count;
+	/* crtc currently bound to this */
+	uint32_t			crtc_ids[2];
+};
+
+static int radeonfb_setcolreg(unsigned regno,
+			      unsigned red,
+			      unsigned green,
+			      unsigned blue,
+			      unsigned transp,
+			      struct fb_info *info)
+{
+	struct radeon_fb_device *rfbdev = info->par;
+	struct drm_device *dev = rfbdev->rdev->ddev;
+	struct drm_crtc *crtc;
+	int i;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+		struct drm_mode_set *modeset = &radeon_crtc->mode_set;
+		struct drm_framebuffer *fb = modeset->fb;
+
+		for (i = 0; i < rfbdev->crtc_count; i++) {
+			if (crtc->base.id == rfbdev->crtc_ids[i]) {
+				break;
+			}
+		}
+		if (i == rfbdev->crtc_count) {
+			continue;
+		}
+		if (regno > 255) {
+			return 1;
+		}
+		if (fb->depth == 8) {
+			radeon_crtc_fb_gamma_set(crtc, red, green, blue, regno);
+			return 0;
+		}
+
+		if (regno < 16) {
+			switch (fb->depth) {
+			case 15:
+				fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
+					((green & 0xf800) >>  6) |
+					((blue & 0xf800) >> 11);
+				break;
+			case 16:
+				fb->pseudo_palette[regno] = (red & 0xf800) |
+					((green & 0xfc00) >>  5) |
+					((blue  & 0xf800) >> 11);
+				break;
+			case 24:
+			case 32:
+				fb->pseudo_palette[regno] = ((red & 0xff00) << 8) |
+					(green & 0xff00) |
+					((blue  & 0xff00) >> 8);
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+static int radeonfb_check_var(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct radeon_fb_device *rfbdev = info->par;
+	struct radeon_framebuffer *rfb = rfbdev->rfb;
+	struct drm_framebuffer *fb = &rfb->base;
+	int depth;
+
+	if (var->pixclock == -1 || !var->pixclock) {
+		return -EINVAL;
+	}
+	/* Need to resize the fb object !!! */
+	if (var->xres > fb->width || var->yres > fb->height) {
+		DRM_ERROR("Requested width/height is greater than current fb "
+			   "object %dx%d > %dx%d\n", var->xres, var->yres,
+			   fb->width, fb->height);
+		DRM_ERROR("Need resizing code.\n");
+		return -EINVAL;
+	}
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		depth = (var->green.length == 6) ? 16 : 15;
+		break;
+	case 32:
+		depth = (var->transp.length > 0) ? 32 : 24;
+		break;
+	default:
+		depth = var->bits_per_pixel;
+		break;
+	}
+
+	switch (depth) {
+	case 8:
+		var->red.offset = 0;
+		var->green.offset = 0;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		break;
+	case 15:
+		var->red.offset = 10;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 5;
+		var->blue.length = 5;
+		var->transp.length = 1;
+		var->transp.offset = 15;
+		break;
+	case 16:
+		var->red.offset = 11;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 6;
+		var->blue.length = 5;
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		break;
+	case 24:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		break;
+	case 32:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 8;
+		var->transp.offset = 24;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* this will let fbcon do the mode init */
+static int radeonfb_set_par(struct fb_info *info)
+{
+	struct radeon_fb_device *rfbdev = info->par;
+	struct drm_device *dev = rfbdev->rdev->ddev;
+	struct fb_var_screeninfo *var = &info->var;
+	struct drm_crtc *crtc;
+	int ret;
+	int i;
+
+	if (var->pixclock != -1) {
+		DRM_ERROR("PIXEL CLCOK SET\n");
+		return -EINVAL;
+	}
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+		for (i = 0; i < rfbdev->crtc_count; i++) {
+			if (crtc->base.id == rfbdev->crtc_ids[i]) {
+				break;
+			}
+		}
+		if (i == rfbdev->crtc_count) {
+			continue;
+		}
+		if (crtc->fb == radeon_crtc->mode_set.fb) {
+			mutex_lock(&dev->mode_config.mutex);
+			ret = crtc->funcs->set_config(&radeon_crtc->mode_set);
+			mutex_unlock(&dev->mode_config.mutex);
+			if (ret) {
+				return ret;
+			}
+		}
+	}
+	return 0;
+}
+
+static int radeonfb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	struct radeon_fb_device *rfbdev = info->par;
+	struct drm_device *dev = rfbdev->rdev->ddev;
+	struct drm_mode_set *modeset;
+	struct drm_crtc *crtc;
+	struct radeon_crtc *radeon_crtc;
+	int ret = 0;
+	int i;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		for (i = 0; i < rfbdev->crtc_count; i++) {
+			if (crtc->base.id == rfbdev->crtc_ids[i]) {
+				break;
+			}
+		}
+
+		if (i == rfbdev->crtc_count) {
+			continue;
+		}
+
+		radeon_crtc = to_radeon_crtc(crtc);
+		modeset = &radeon_crtc->mode_set;
+
+		modeset->x = var->xoffset;
+		modeset->y = var->yoffset;
+
+		if (modeset->num_connectors) {
+			mutex_lock(&dev->mode_config.mutex);
+			ret = crtc->funcs->set_config(modeset);
+			mutex_unlock(&dev->mode_config.mutex);
+			if (!ret) {
+				info->var.xoffset = var->xoffset;
+				info->var.yoffset = var->yoffset;
+			}
+		}
+	}
+	return ret;
+}
+
+static void radeonfb_on(struct fb_info *info)
+{
+	struct radeon_fb_device *rfbdev = info->par;
+	struct drm_device *dev = rfbdev->rdev->ddev;
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	int i;
+
+	/*
+	 * For each CRTC in this fb, find all associated encoders
+	 * and turn them off, then turn off the CRTC.
+	 */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+		for (i = 0; i < rfbdev->crtc_count; i++) {
+			if (crtc->base.id == rfbdev->crtc_ids[i]) {
+				break;
+			}
+		}
+
+		mutex_lock(&dev->mode_config.mutex);
+		crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+		mutex_unlock(&dev->mode_config.mutex);
+
+		/* Found a CRTC on this fb, now find encoders */
+		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+			if (encoder->crtc == crtc) {
+				struct drm_encoder_helper_funcs *encoder_funcs;
+
+				encoder_funcs = encoder->helper_private;
+				mutex_lock(&dev->mode_config.mutex);
+				encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+				mutex_unlock(&dev->mode_config.mutex);
+			}
+		}
+	}
+}
+
+static void radeonfb_off(struct fb_info *info, int dpms_mode)
+{
+	struct radeon_fb_device *rfbdev = info->par;
+	struct drm_device *dev = rfbdev->rdev->ddev;
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	int i;
+
+	/*
+	 * For each CRTC in this fb, find all associated encoders
+	 * and turn them off, then turn off the CRTC.
+	 */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+		for (i = 0; i < rfbdev->crtc_count; i++) {
+			if (crtc->base.id == rfbdev->crtc_ids[i]) {
+				break;
+			}
+		}
+
+		/* Found a CRTC on this fb, now find encoders */
+		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+			if (encoder->crtc == crtc) {
+				struct drm_encoder_helper_funcs *encoder_funcs;
+
+				encoder_funcs = encoder->helper_private;
+				mutex_lock(&dev->mode_config.mutex);
+				encoder_funcs->dpms(encoder, dpms_mode);
+				mutex_unlock(&dev->mode_config.mutex);
+			}
+		}
+		if (dpms_mode == DRM_MODE_DPMS_OFF) {
+			mutex_lock(&dev->mode_config.mutex);
+			crtc_funcs->dpms(crtc, dpms_mode);
+			mutex_unlock(&dev->mode_config.mutex);
+		}
+	}
+}
+
+int radeonfb_blank(int blank, struct fb_info *info)
+{
+	switch (blank) {
+	case FB_BLANK_UNBLANK:
+		radeonfb_on(info);
+		break;
+	case FB_BLANK_NORMAL:
+		radeonfb_off(info, DRM_MODE_DPMS_STANDBY);
+		break;
+	case FB_BLANK_HSYNC_SUSPEND:
+		radeonfb_off(info, DRM_MODE_DPMS_STANDBY);
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+		radeonfb_off(info, DRM_MODE_DPMS_SUSPEND);
+		break;
+	case FB_BLANK_POWERDOWN:
+		radeonfb_off(info, DRM_MODE_DPMS_OFF);
+		break;
+	}
+	return 0;
+}
+
+static struct fb_ops radeonfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = radeonfb_check_var,
+	.fb_set_par = radeonfb_set_par,
+	.fb_setcolreg = radeonfb_setcolreg,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_pan_display = radeonfb_pan_display,
+	.fb_blank = radeonfb_blank,
+};
+
+/**
+ * Curretly it is assumed that the old framebuffer is reused.
+ *
+ * LOCKING
+ * caller should hold the mode config lock.
+ *
+ */
+int radeonfb_resize(struct drm_device *dev, struct drm_crtc *crtc)
+{
+	struct fb_info *info;
+	struct drm_framebuffer *fb;
+	struct drm_display_mode *mode = crtc->desired_mode;
+
+	fb = crtc->fb;
+	if (fb == NULL) {
+		return 1;
+	}
+	info = fb->fbdev;
+	if (info == NULL) {
+		return 1;
+	}
+	if (mode == NULL) {
+		return 1;
+	}
+	info->var.xres = mode->hdisplay;
+	info->var.right_margin = mode->hsync_start - mode->hdisplay;
+	info->var.hsync_len = mode->hsync_end - mode->hsync_start;
+	info->var.left_margin = mode->htotal - mode->hsync_end;
+	info->var.yres = mode->vdisplay;
+	info->var.lower_margin = mode->vsync_start - mode->vdisplay;
+	info->var.vsync_len = mode->vsync_end - mode->vsync_start;
+	info->var.upper_margin = mode->vtotal - mode->vsync_end;
+	info->var.pixclock = 10000000 / mode->htotal * 1000 / mode->vtotal * 100;
+	/* avoid overflow */
+	info->var.pixclock = info->var.pixclock * 1000 / mode->vrefresh;
+
+	return 0;
+}
+EXPORT_SYMBOL(radeonfb_resize);
+
+static struct drm_mode_set panic_mode;
+
+int radeonfb_panic(struct notifier_block *n, unsigned long ununsed,
+		  void *panic_str)
+{
+	DRM_ERROR("panic occurred, switching back to text console\n");
+	drm_crtc_helper_set_config(&panic_mode);
+	return 0;
+}
+EXPORT_SYMBOL(radeonfb_panic);
+
+static struct notifier_block paniced = {
+	.notifier_call = radeonfb_panic,
+};
+
+static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp)
+{
+	int aligned = width;
+	int align_large = (ASIC_IS_AVIVO(rdev));
+	int pitch_mask = 0;
+
+	switch (bpp / 8) {
+	case 1:
+		pitch_mask = align_large ? 255 : 127;
+		break;
+	case 2:
+		pitch_mask = align_large ? 127 : 31;
+		break;
+	case 3:
+	case 4:
+		pitch_mask = align_large ? 63 : 15;
+		break;
+	}
+
+	aligned += pitch_mask;
+	aligned &= ~pitch_mask;
+	return aligned;
+}
+
+int radeonfb_create(struct radeon_device *rdev,
+		    uint32_t fb_width, uint32_t fb_height,
+		    uint32_t surface_width, uint32_t surface_height,
+		    struct radeon_framebuffer **rfb_p)
+{
+	struct fb_info *info;
+	struct radeon_fb_device *rfbdev;
+	struct drm_framebuffer *fb;
+	struct radeon_framebuffer *rfb;
+	struct drm_mode_fb_cmd mode_cmd;
+	struct drm_gem_object *gobj = NULL;
+	struct radeon_object *robj = NULL;
+	struct device *device = &rdev->pdev->dev;
+	int size, aligned_size, ret;
+	void *fbptr = NULL;
+
+	mode_cmd.width = surface_width;
+	mode_cmd.height = surface_height;
+	mode_cmd.bpp = 32;
+	/* need to align pitch with crtc limits */
+	mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp) * ((mode_cmd.bpp + 1) / 8);
+	mode_cmd.depth = 24;
+
+	size = mode_cmd.pitch * mode_cmd.height;
+	aligned_size = ALIGN(size, PAGE_SIZE);
+
+	ret = radeon_gem_object_create(rdev, aligned_size, 0,
+				       RADEON_GEM_DOMAIN_VRAM,
+				       false, ttm_bo_type_kernel,
+				       false, &gobj);
+	if (ret) {
+		printk(KERN_ERR "failed to allocate framebuffer\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+	robj = gobj->driver_private;
+
+	mutex_lock(&rdev->ddev->struct_mutex);
+	fb = radeon_framebuffer_create(rdev->ddev, &mode_cmd, gobj);
+	if (fb == NULL) {
+		DRM_ERROR("failed to allocate fb.\n");
+		ret = -ENOMEM;
+		goto out_unref;
+	}
+
+	list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list);
+
+	rfb = to_radeon_framebuffer(fb);
+	*rfb_p = rfb;
+	rdev->fbdev_rfb = rfb;
+
+	info = framebuffer_alloc(sizeof(struct radeon_fb_device), device);
+	if (info == NULL) {
+		ret = -ENOMEM;
+		goto out_unref;
+	}
+	rfbdev = info->par;
+
+	ret = radeon_object_kmap(robj, &fbptr);
+	if (ret) {
+		goto out_unref;
+	}
+
+	strcpy(info->fix.id, "radeondrmfb");
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.visual = FB_VISUAL_TRUECOLOR;
+	info->fix.type_aux = 0;
+	info->fix.xpanstep = 1; /* doing it in hw */
+	info->fix.ypanstep = 1; /* doing it in hw */
+	info->fix.ywrapstep = 0;
+	info->fix.accel = FB_ACCEL_I830;
+	info->fix.type_aux = 0;
+	info->flags = FBINFO_DEFAULT;
+	info->fbops = &radeonfb_ops;
+	info->fix.line_length = fb->pitch;
+	info->screen_base = fbptr;
+	info->fix.smem_start = (unsigned long)fbptr;
+	info->fix.smem_len = size;
+	info->screen_base = fbptr;
+	info->screen_size = size;
+	info->pseudo_palette = fb->pseudo_palette;
+	info->var.xres_virtual = fb->width;
+	info->var.yres_virtual = fb->height;
+	info->var.bits_per_pixel = fb->bits_per_pixel;
+	info->var.xoffset = 0;
+	info->var.yoffset = 0;
+	info->var.activate = FB_ACTIVATE_NOW;
+	info->var.height = -1;
+	info->var.width = -1;
+	info->var.xres = fb_width;
+	info->var.yres = fb_height;
+	info->fix.mmio_start = pci_resource_start(rdev->pdev, 2);
+	info->fix.mmio_len = pci_resource_len(rdev->pdev, 2);
+	info->pixmap.size = 64*1024;
+	info->pixmap.buf_align = 8;
+	info->pixmap.access_align = 32;
+	info->pixmap.flags = FB_PIXMAP_SYSTEM;
+	info->pixmap.scan_align = 1;
+	if (info->screen_base == NULL) {
+		ret = -ENOSPC;
+		goto out_unref;
+	}
+	DRM_INFO("fb mappable at 0x%lX\n",  info->fix.smem_start);
+	DRM_INFO("vram apper at 0x%lX\n",  (unsigned long)rdev->mc.aper_base);
+	DRM_INFO("size %lu\n", (unsigned long)size);
+	DRM_INFO("fb depth is %d\n", fb->depth);
+	DRM_INFO("   pitch is %d\n", fb->pitch);
+
+	switch (fb->depth) {
+	case 8:
+		info->var.red.offset = 0;
+		info->var.green.offset = 0;
+		info->var.blue.offset = 0;
+		info->var.red.length = 8; /* 8bit DAC */
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 0;
+		info->var.transp.length = 0;
+		break;
+	case 15:
+		info->var.red.offset = 10;
+		info->var.green.offset = 5;
+		info->var.blue.offset = 0;
+		info->var.red.length = 5;
+		info->var.green.length = 5;
+		info->var.blue.length = 5;
+		info->var.transp.offset = 15;
+		info->var.transp.length = 1;
+		break;
+	case 16:
+		info->var.red.offset = 11;
+		info->var.green.offset = 5;
+		info->var.blue.offset = 0;
+		info->var.red.length = 5;
+		info->var.green.length = 6;
+		info->var.blue.length = 5;
+		info->var.transp.offset = 0;
+		break;
+	case 24:
+		info->var.red.offset = 16;
+		info->var.green.offset = 8;
+		info->var.blue.offset = 0;
+		info->var.red.length = 8;
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 0;
+		info->var.transp.length = 0;
+		break;
+	case 32:
+		info->var.red.offset = 16;
+		info->var.green.offset = 8;
+		info->var.blue.offset = 0;
+		info->var.red.length = 8;
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 24;
+		info->var.transp.length = 8;
+		break;
+	default:
+		break;
+	}
+
+	fb->fbdev = info;
+	rfbdev->rfb = rfb;
+	rfbdev->rdev = rdev;
+
+	mutex_unlock(&rdev->ddev->struct_mutex);
+	return 0;
+
+out_unref:
+	if (robj) {
+		radeon_object_kunmap(robj);
+	}
+	if (ret) {
+		list_del(&fb->filp_head);
+		drm_gem_object_unreference(gobj);
+		drm_framebuffer_cleanup(fb);
+		kfree(fb);
+	}
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&rdev->ddev->struct_mutex);
+out:
+	return ret;
+}
+
+static int radeonfb_single_fb_probe(struct radeon_device *rdev)
+{
+	struct drm_crtc *crtc;
+	struct drm_connector *connector;
+	unsigned int fb_width = (unsigned)-1, fb_height = (unsigned)-1;
+	unsigned int surface_width = 0, surface_height = 0;
+	int new_fb = 0;
+	int crtc_count = 0;
+	int ret, i, conn_count = 0;
+	struct radeon_framebuffer *rfb;
+	struct fb_info *info;
+	struct radeon_fb_device *rfbdev;
+	struct drm_mode_set *modeset = NULL;
+
+	/* first up get a count of crtcs now in use and new min/maxes width/heights */
+	list_for_each_entry(crtc, &rdev->ddev->mode_config.crtc_list, head) {
+		if (drm_helper_crtc_in_use(crtc)) {
+			if (crtc->desired_mode) {
+				if (crtc->desired_mode->hdisplay < fb_width)
+					fb_width = crtc->desired_mode->hdisplay;
+
+				if (crtc->desired_mode->vdisplay < fb_height)
+					fb_height = crtc->desired_mode->vdisplay;
+
+				if (crtc->desired_mode->hdisplay > surface_width)
+					surface_width = crtc->desired_mode->hdisplay;
+
+				if (crtc->desired_mode->vdisplay > surface_height)
+					surface_height = crtc->desired_mode->vdisplay;
+			}
+			crtc_count++;
+		}
+	}
+
+	if (crtc_count == 0 || fb_width == -1 || fb_height == -1) {
+		/* hmm everyone went away - assume VGA cable just fell out
+		   and will come back later. */
+		return 0;
+	}
+
+	/* do we have an fb already? */
+	if (list_empty(&rdev->ddev->mode_config.fb_kernel_list)) {
+		/* create an fb if we don't have one */
+		ret = radeonfb_create(rdev, fb_width, fb_height, surface_width, surface_height, &rfb);
+		if (ret) {
+			return -EINVAL;
+		}
+		new_fb = 1;
+	} else {
+		struct drm_framebuffer *fb;
+		fb = list_first_entry(&rdev->ddev->mode_config.fb_kernel_list, struct drm_framebuffer, filp_head);
+		rfb = to_radeon_framebuffer(fb);
+
+		/* if someone hotplugs something bigger than we have already allocated, we are pwned.
+		   As really we can't resize an fbdev that is in the wild currently due to fbdev
+		   not really being designed for the lower layers moving stuff around under it.
+		   - so in the grand style of things - punt. */
+		if ((fb->width < surface_width) || (fb->height < surface_height)) {
+			DRM_ERROR("Framebuffer not large enough to scale console onto.\n");
+			return -EINVAL;
+		}
+	}
+
+	info = rfb->base.fbdev;
+	rdev->fbdev_info = info;
+	rfbdev = info->par;
+
+	crtc_count = 0;
+	/* okay we need to setup new connector sets in the crtcs */
+	list_for_each_entry(crtc, &rdev->ddev->mode_config.crtc_list, head) {
+		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+		modeset = &radeon_crtc->mode_set;
+		modeset->fb = &rfb->base;
+		conn_count = 0;
+		list_for_each_entry(connector, &rdev->ddev->mode_config.connector_list, head) {
+			if (connector->encoder)
+				if (connector->encoder->crtc == modeset->crtc) {
+					modeset->connectors[conn_count] = connector;
+					conn_count++;
+					if (conn_count > RADEONFB_CONN_LIMIT)
+						BUG();
+				}
+		}
+
+		for (i = conn_count; i < RADEONFB_CONN_LIMIT; i++)
+			modeset->connectors[i] = NULL;
+
+
+		rfbdev->crtc_ids[crtc_count++] = crtc->base.id;
+
+		modeset->num_connectors = conn_count;
+		if (modeset->crtc->desired_mode) {
+			if (modeset->mode) {
+				drm_mode_destroy(rdev->ddev, modeset->mode);
+			}
+			modeset->mode = drm_mode_duplicate(rdev->ddev,
+							   modeset->crtc->desired_mode);
+		}
+	}
+	rfbdev->crtc_count = crtc_count;
+
+	if (new_fb) {
+		info->var.pixclock = -1;
+		if (register_framebuffer(info) < 0)
+			return -EINVAL;
+	} else {
+		radeonfb_set_par(info);
+	}
+	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	       info->fix.id);
+
+	/* Switch back to kernel console on panic */
+	panic_mode = *modeset;
+	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
+	printk(KERN_INFO "registered panic notifier\n");
+
+	return 0;
+}
+
+int radeonfb_probe(struct drm_device *dev)
+{
+	int ret;
+
+	/* something has changed in the lower levels of hell - deal with it
+	   here */
+
+	/* two modes : a) 1 fb to rule all crtcs.
+	               b) one fb per crtc.
+	   two actions 1) new connected device
+	               2) device removed.
+	   case a/1 : if the fb surface isn't big enough - resize the surface fb.
+	              if the fb size isn't big enough - resize fb into surface.
+		      if everything big enough configure the new crtc/etc.
+	   case a/2 : undo the configuration
+	              possibly resize down the fb to fit the new configuration.
+           case b/1 : see if it is on a new crtc - setup a new fb and add it.
+	   case b/2 : teardown the new fb.
+	*/
+	ret = radeonfb_single_fb_probe(dev->dev_private);
+	return ret;
+}
+EXPORT_SYMBOL(radeonfb_probe);
+
+int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb)
+{
+	struct fb_info *info;
+	struct radeon_framebuffer *rfb = to_radeon_framebuffer(fb);
+	struct radeon_object *robj;
+
+	if (!fb) {
+		return -EINVAL;
+	}
+	info = fb->fbdev;
+	if (info) {
+		robj = rfb->obj->driver_private;
+		unregister_framebuffer(info);
+		radeon_object_kunmap(robj);
+		framebuffer_release(info);
+	}
+
+	printk(KERN_INFO "unregistered panic notifier\n");
+	atomic_notifier_chain_unregister(&panic_notifier_list, &paniced);
+	memset(&panic_mode, 0, sizeof(struct drm_mode_set));
+	return 0;
+}
+EXPORT_SYMBOL(radeonfb_remove);
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
new file mode 100644
index 00000000000..96afbf5ae2a
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -0,0 +1,387 @@
+/*
+ * Copyright 2009 Jerome Glisse.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ */
+/*
+ * Authors:
+ *    Jerome Glisse <glisse@freedesktop.org>
+ *    Dave Airlie
+ */
+#include <linux/seq_file.h>
+#include <asm/atomic.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/kref.h>
+#include "drmP.h"
+#include "drm.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+int radeon_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence)
+{
+	unsigned long irq_flags;
+
+	write_lock_irqsave(&rdev->fence_drv.lock, irq_flags);
+	if (fence->emited) {
+		write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+		return 0;
+	}
+	fence->seq = atomic_add_return(1, &rdev->fence_drv.seq);
+	if (!rdev->cp.ready) {
+		/* FIXME: cp is not running assume everythings is done right
+		 * away
+		 */
+		WREG32(rdev->fence_drv.scratch_reg, fence->seq);
+	} else {
+		radeon_fence_ring_emit(rdev, fence);
+	}
+	fence->emited = true;
+	fence->timeout = jiffies + ((2000 * HZ) / 1000);
+	list_del(&fence->list);
+	list_add_tail(&fence->list, &rdev->fence_drv.emited);
+	write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+	return 0;
+}
+
+static bool radeon_fence_poll_locked(struct radeon_device *rdev)
+{
+	struct radeon_fence *fence;
+	struct list_head *i, *n;
+	uint32_t seq;
+	bool wake = false;
+
+	if (rdev == NULL) {
+		return true;
+	}
+	if (rdev->shutdown) {
+		return true;
+	}
+	seq = RREG32(rdev->fence_drv.scratch_reg);
+	rdev->fence_drv.last_seq = seq;
+	n = NULL;
+	list_for_each(i, &rdev->fence_drv.emited) {
+		fence = list_entry(i, struct radeon_fence, list);
+		if (fence->seq == seq) {
+			n = i;
+			break;
+		}
+	}
+	/* all fence previous to this one are considered as signaled */
+	if (n) {
+		i = n;
+		do {
+			n = i->prev;
+			list_del(i);
+			list_add_tail(i, &rdev->fence_drv.signaled);
+			fence = list_entry(i, struct radeon_fence, list);
+			fence->signaled = true;
+			i = n;
+		} while (i != &rdev->fence_drv.emited);
+		wake = true;
+	}
+	return wake;
+}
+
+static void radeon_fence_destroy(struct kref *kref)
+{
+	unsigned long irq_flags;
+        struct radeon_fence *fence;
+
+	fence = container_of(kref, struct radeon_fence, kref);
+	write_lock_irqsave(&fence->rdev->fence_drv.lock, irq_flags);
+	list_del(&fence->list);
+	fence->emited = false;
+	write_unlock_irqrestore(&fence->rdev->fence_drv.lock, irq_flags);
+	kfree(fence);
+}
+
+int radeon_fence_create(struct radeon_device *rdev, struct radeon_fence **fence)
+{
+	unsigned long irq_flags;
+
+	*fence = kmalloc(sizeof(struct radeon_fence), GFP_KERNEL);
+	if ((*fence) == NULL) {
+		return -ENOMEM;
+	}
+	kref_init(&((*fence)->kref));
+	(*fence)->rdev = rdev;
+	(*fence)->emited = false;
+	(*fence)->signaled = false;
+	(*fence)->seq = 0;
+	INIT_LIST_HEAD(&(*fence)->list);
+
+	write_lock_irqsave(&rdev->fence_drv.lock, irq_flags);
+	list_add_tail(&(*fence)->list, &rdev->fence_drv.created);
+	write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+	return 0;
+}
+
+
+bool radeon_fence_signaled(struct radeon_fence *fence)
+{
+	struct radeon_device *rdev = fence->rdev;
+	unsigned long irq_flags;
+	bool signaled = false;
+
+	if (rdev->gpu_lockup) {
+		return true;
+	}
+	if (fence == NULL) {
+		return true;
+	}
+	write_lock_irqsave(&fence->rdev->fence_drv.lock, irq_flags);
+	signaled = fence->signaled;
+	/* if we are shuting down report all fence as signaled */
+	if (fence->rdev->shutdown) {
+		signaled = true;
+	}
+	if (!fence->emited) {
+		WARN(1, "Querying an unemited fence : %p !\n", fence);
+		signaled = true;
+	}
+	if (!signaled) {
+		radeon_fence_poll_locked(fence->rdev);
+		signaled = fence->signaled;
+	}
+	write_unlock_irqrestore(&fence->rdev->fence_drv.lock, irq_flags);
+	return signaled;
+}
+
+int radeon_fence_wait(struct radeon_fence *fence, bool interruptible)
+{
+	struct radeon_device *rdev;
+	unsigned long cur_jiffies;
+	unsigned long timeout;
+	bool expired = false;
+	int r;
+
+
+	if (fence == NULL) {
+		WARN(1, "Querying an invalid fence : %p !\n", fence);
+		return 0;
+	}
+	rdev = fence->rdev;
+	if (radeon_fence_signaled(fence)) {
+		return 0;
+	}
+retry:
+	cur_jiffies = jiffies;
+	timeout = HZ / 100;
+	if (time_after(fence->timeout, cur_jiffies)) {
+		timeout = fence->timeout - cur_jiffies;
+	}
+	if (interruptible) {
+		r = wait_event_interruptible_timeout(rdev->fence_drv.queue,
+				radeon_fence_signaled(fence), timeout);
+		if (unlikely(r == -ERESTARTSYS)) {
+			return -ERESTART;
+		}
+	} else {
+		r = wait_event_timeout(rdev->fence_drv.queue,
+			 radeon_fence_signaled(fence), timeout);
+	}
+	if (unlikely(!radeon_fence_signaled(fence))) {
+		if (unlikely(r == 0)) {
+			expired = true;
+		}
+		if (unlikely(expired)) {
+			timeout = 1;
+			if (time_after(cur_jiffies, fence->timeout)) {
+				timeout = cur_jiffies - fence->timeout;
+			}
+			timeout = jiffies_to_msecs(timeout);
+			if (timeout > 500) {
+				DRM_ERROR("fence(%p:0x%08X) %lums timeout "
+					  "going to reset GPU\n",
+					  fence, fence->seq, timeout);
+				radeon_gpu_reset(rdev);
+				WREG32(rdev->fence_drv.scratch_reg, fence->seq);
+			}
+		}
+		goto retry;
+	}
+	if (unlikely(expired)) {
+		rdev->fence_drv.count_timeout++;
+		cur_jiffies = jiffies;
+		timeout = 1;
+		if (time_after(cur_jiffies, fence->timeout)) {
+			timeout = cur_jiffies - fence->timeout;
+		}
+		timeout = jiffies_to_msecs(timeout);
+		DRM_ERROR("fence(%p:0x%08X) %lums timeout\n",
+			  fence, fence->seq, timeout);
+		DRM_ERROR("last signaled fence(0x%08X)\n",
+			  rdev->fence_drv.last_seq);
+	}
+	return 0;
+}
+
+int radeon_fence_wait_next(struct radeon_device *rdev)
+{
+	unsigned long irq_flags;
+	struct radeon_fence *fence;
+	int r;
+
+	if (rdev->gpu_lockup) {
+		return 0;
+	}
+	write_lock_irqsave(&rdev->fence_drv.lock, irq_flags);
+	if (list_empty(&rdev->fence_drv.emited)) {
+		write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+		return 0;
+	}
+	fence = list_entry(rdev->fence_drv.emited.next,
+			   struct radeon_fence, list);
+	radeon_fence_ref(fence);
+	write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+	r = radeon_fence_wait(fence, false);
+	radeon_fence_unref(&fence);
+	return r;
+}
+
+int radeon_fence_wait_last(struct radeon_device *rdev)
+{
+	unsigned long irq_flags;
+	struct radeon_fence *fence;
+	int r;
+
+	if (rdev->gpu_lockup) {
+		return 0;
+	}
+	write_lock_irqsave(&rdev->fence_drv.lock, irq_flags);
+	if (list_empty(&rdev->fence_drv.emited)) {
+		write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+		return 0;
+	}
+	fence = list_entry(rdev->fence_drv.emited.prev,
+			   struct radeon_fence, list);
+	radeon_fence_ref(fence);
+	write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+	r = radeon_fence_wait(fence, false);
+	radeon_fence_unref(&fence);
+	return r;
+}
+
+struct radeon_fence *radeon_fence_ref(struct radeon_fence *fence)
+{
+	kref_get(&fence->kref);
+	return fence;
+}
+
+void radeon_fence_unref(struct radeon_fence **fence)
+{
+	struct radeon_fence *tmp = *fence;
+
+	*fence = NULL;
+	if (tmp) {
+		kref_put(&tmp->kref, &radeon_fence_destroy);
+	}
+}
+
+void radeon_fence_process(struct radeon_device *rdev)
+{
+	unsigned long irq_flags;
+	bool wake;
+
+	write_lock_irqsave(&rdev->fence_drv.lock, irq_flags);
+	wake = radeon_fence_poll_locked(rdev);
+	write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+	if (wake) {
+		wake_up_all(&rdev->fence_drv.queue);
+	}
+}
+
+int radeon_fence_driver_init(struct radeon_device *rdev)
+{
+	unsigned long irq_flags;
+	int r;
+
+	write_lock_irqsave(&rdev->fence_drv.lock, irq_flags);
+	r = radeon_scratch_get(rdev, &rdev->fence_drv.scratch_reg);
+	if (r) {
+		DRM_ERROR("Fence failed to get a scratch register.");
+		write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+		return r;
+	}
+	WREG32(rdev->fence_drv.scratch_reg, 0);
+	atomic_set(&rdev->fence_drv.seq, 0);
+	INIT_LIST_HEAD(&rdev->fence_drv.created);
+	INIT_LIST_HEAD(&rdev->fence_drv.emited);
+	INIT_LIST_HEAD(&rdev->fence_drv.signaled);
+	rdev->fence_drv.count_timeout = 0;
+	init_waitqueue_head(&rdev->fence_drv.queue);
+	write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+	if (radeon_debugfs_fence_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for fence !\n");
+	}
+	return 0;
+}
+
+void radeon_fence_driver_fini(struct radeon_device *rdev)
+{
+	unsigned long irq_flags;
+
+	wake_up_all(&rdev->fence_drv.queue);
+	write_lock_irqsave(&rdev->fence_drv.lock, irq_flags);
+	radeon_scratch_free(rdev, rdev->fence_drv.scratch_reg);
+	write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
+	DRM_INFO("radeon: fence finalized\n");
+}
+
+
+/*
+ * Fence debugfs
+ */
+#if defined(CONFIG_DEBUG_FS)
+static int radeon_debugfs_fence_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *)m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_fence *fence;
+
+	seq_printf(m, "Last signaled fence 0x%08X\n",
+		   RREG32(rdev->fence_drv.scratch_reg));
+	if (!list_empty(&rdev->fence_drv.emited)) {
+		   fence = list_entry(rdev->fence_drv.emited.prev,
+				      struct radeon_fence, list);
+		   seq_printf(m, "Last emited fence %p with 0x%08X\n",
+			      fence,  fence->seq);
+	}
+	return 0;
+}
+
+static struct drm_info_list radeon_debugfs_fence_list[] = {
+	{"radeon_fence_info", &radeon_debugfs_fence_info, 0, NULL},
+};
+#endif
+
+int radeon_debugfs_fence_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, radeon_debugfs_fence_list, 1);
+#else
+	return 0;
+#endif
+}
diff --git a/drivers/gpu/drm/radeon/radeon_fixed.h b/drivers/gpu/drm/radeon/radeon_fixed.h
new file mode 100644
index 00000000000..90187d17384
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_fixed.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2009 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ */
+#ifndef RADEON_FIXED_H
+#define RADEON_FIXED_H
+
+typedef union rfixed {
+	u32 full;
+} fixed20_12;
+
+
+#define rfixed_const(A) (u32)(((A) << 12))/*  + ((B + 0.000122)*4096)) */
+#define rfixed_const_half(A) (u32)(((A) << 12) + 2048)
+#define rfixed_const_666(A) (u32)(((A) << 12) + 2731)
+#define rfixed_const_8(A) (u32)(((A) << 12) + 3277)
+#define rfixed_mul(A, B) ((u64)((u64)(A).full * (B).full + 2048) >> 12)
+#define fixed_init(A) { .full = rfixed_const((A)) }
+#define fixed_init_half(A) { .full = rfixed_const_half((A)) }
+#define rfixed_trunc(A) ((A).full >> 12)
+
+static inline u32 rfixed_div(fixed20_12 A, fixed20_12 B)
+{
+	u64 tmp = ((u64)A.full << 13);
+
+	do_div(tmp, B.full);
+	tmp += 1;
+	tmp /= 2;
+	return lower_32_bits(tmp);
+}
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
new file mode 100644
index 00000000000..d343a15316e
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+#include "radeon_reg.h"
+
+/*
+ * Common GART table functions.
+ */
+int radeon_gart_table_ram_alloc(struct radeon_device *rdev)
+{
+	void *ptr;
+
+	ptr = pci_alloc_consistent(rdev->pdev, rdev->gart.table_size,
+				   &rdev->gart.table_addr);
+	if (ptr == NULL) {
+		return -ENOMEM;
+	}
+#ifdef CONFIG_X86
+	if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480 ||
+	    rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) {
+		set_memory_uc((unsigned long)ptr,
+			      rdev->gart.table_size >> PAGE_SHIFT);
+	}
+#endif
+	rdev->gart.table.ram.ptr = ptr;
+	memset((void *)rdev->gart.table.ram.ptr, 0, rdev->gart.table_size);
+	return 0;
+}
+
+void radeon_gart_table_ram_free(struct radeon_device *rdev)
+{
+	if (rdev->gart.table.ram.ptr == NULL) {
+		return;
+	}
+#ifdef CONFIG_X86
+	if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480 ||
+	    rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) {
+		set_memory_wb((unsigned long)rdev->gart.table.ram.ptr,
+			      rdev->gart.table_size >> PAGE_SHIFT);
+	}
+#endif
+	pci_free_consistent(rdev->pdev, rdev->gart.table_size,
+			    (void *)rdev->gart.table.ram.ptr,
+			    rdev->gart.table_addr);
+	rdev->gart.table.ram.ptr = NULL;
+	rdev->gart.table_addr = 0;
+}
+
+int radeon_gart_table_vram_alloc(struct radeon_device *rdev)
+{
+	uint64_t gpu_addr;
+	int r;
+
+	if (rdev->gart.table.vram.robj == NULL) {
+		r = radeon_object_create(rdev, NULL,
+					 rdev->gart.table_size,
+					 true,
+					 RADEON_GEM_DOMAIN_VRAM,
+					 false, &rdev->gart.table.vram.robj);
+		if (r) {
+			return r;
+		}
+	}
+	r = radeon_object_pin(rdev->gart.table.vram.robj,
+			      RADEON_GEM_DOMAIN_VRAM, &gpu_addr);
+	if (r) {
+		radeon_object_unref(&rdev->gart.table.vram.robj);
+		return r;
+	}
+	r = radeon_object_kmap(rdev->gart.table.vram.robj,
+			       (void **)&rdev->gart.table.vram.ptr);
+	if (r) {
+		radeon_object_unpin(rdev->gart.table.vram.robj);
+		radeon_object_unref(&rdev->gart.table.vram.robj);
+		DRM_ERROR("radeon: failed to map gart vram table.\n");
+		return r;
+	}
+	rdev->gart.table_addr = gpu_addr;
+	return 0;
+}
+
+void radeon_gart_table_vram_free(struct radeon_device *rdev)
+{
+	if (rdev->gart.table.vram.robj == NULL) {
+		return;
+	}
+	radeon_object_kunmap(rdev->gart.table.vram.robj);
+	radeon_object_unpin(rdev->gart.table.vram.robj);
+	radeon_object_unref(&rdev->gart.table.vram.robj);
+}
+
+
+
+
+/*
+ * Common gart functions.
+ */
+void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset,
+			int pages)
+{
+	unsigned t;
+	unsigned p;
+	int i, j;
+
+	if (!rdev->gart.ready) {
+		WARN(1, "trying to unbind memory to unitialized GART !\n");
+		return;
+	}
+	t = offset / 4096;
+	p = t / (PAGE_SIZE / 4096);
+	for (i = 0; i < pages; i++, p++) {
+		if (rdev->gart.pages[p]) {
+			pci_unmap_page(rdev->pdev, rdev->gart.pages_addr[p],
+				       PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
+			rdev->gart.pages[p] = NULL;
+			rdev->gart.pages_addr[p] = 0;
+			for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
+				radeon_gart_set_page(rdev, t, 0);
+			}
+		}
+	}
+	mb();
+	radeon_gart_tlb_flush(rdev);
+}
+
+int radeon_gart_bind(struct radeon_device *rdev, unsigned offset,
+		     int pages, struct page **pagelist)
+{
+	unsigned t;
+	unsigned p;
+	uint64_t page_base;
+	int i, j;
+
+	if (!rdev->gart.ready) {
+		DRM_ERROR("trying to bind memory to unitialized GART !\n");
+		return -EINVAL;
+	}
+	t = offset / 4096;
+	p = t / (PAGE_SIZE / 4096);
+
+	for (i = 0; i < pages; i++, p++) {
+		/* we need to support large memory configurations */
+		/* assume that unbind have already been call on the range */
+		rdev->gart.pages_addr[p] = pci_map_page(rdev->pdev, pagelist[i],
+							0, PAGE_SIZE,
+							PCI_DMA_BIDIRECTIONAL);
+		if (pci_dma_mapping_error(rdev->pdev, rdev->gart.pages_addr[p])) {
+			/* FIXME: failed to map page (return -ENOMEM?) */
+			radeon_gart_unbind(rdev, offset, pages);
+			return -ENOMEM;
+		}
+		rdev->gart.pages[p] = pagelist[i];
+		page_base = (uint32_t)rdev->gart.pages_addr[p];
+		for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
+			radeon_gart_set_page(rdev, t, page_base);
+			page_base += 4096;
+		}
+	}
+	mb();
+	radeon_gart_tlb_flush(rdev);
+	return 0;
+}
+
+int radeon_gart_init(struct radeon_device *rdev)
+{
+	if (rdev->gart.pages) {
+		return 0;
+	}
+	/* We need PAGE_SIZE >= 4096 */
+	if (PAGE_SIZE < 4096) {
+		DRM_ERROR("Page size is smaller than GPU page size!\n");
+		return -EINVAL;
+	}
+	/* Compute table size */
+	rdev->gart.num_cpu_pages = rdev->mc.gtt_size / PAGE_SIZE;
+	rdev->gart.num_gpu_pages = rdev->mc.gtt_size / 4096;
+	DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n",
+		 rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages);
+	/* Allocate pages table */
+	rdev->gart.pages = kzalloc(sizeof(void *) * rdev->gart.num_cpu_pages,
+				   GFP_KERNEL);
+	if (rdev->gart.pages == NULL) {
+		radeon_gart_fini(rdev);
+		return -ENOMEM;
+	}
+	rdev->gart.pages_addr = kzalloc(sizeof(dma_addr_t) *
+					rdev->gart.num_cpu_pages, GFP_KERNEL);
+	if (rdev->gart.pages_addr == NULL) {
+		radeon_gart_fini(rdev);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+void radeon_gart_fini(struct radeon_device *rdev)
+{
+	if (rdev->gart.pages && rdev->gart.pages_addr && rdev->gart.ready) {
+		/* unbind pages */
+		radeon_gart_unbind(rdev, 0, rdev->gart.num_cpu_pages);
+	}
+	rdev->gart.ready = false;
+	kfree(rdev->gart.pages);
+	kfree(rdev->gart.pages_addr);
+	rdev->gart.pages = NULL;
+	rdev->gart.pages_addr = NULL;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
new file mode 100644
index 00000000000..eb516034235
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "drm.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+
+int radeon_gem_object_init(struct drm_gem_object *obj)
+{
+	/* we do nothings here */
+	return 0;
+}
+
+void radeon_gem_object_free(struct drm_gem_object *gobj)
+{
+	struct radeon_object *robj = gobj->driver_private;
+
+	gobj->driver_private = NULL;
+	if (robj) {
+		radeon_object_unref(&robj);
+	}
+}
+
+int radeon_gem_object_create(struct radeon_device *rdev, int size,
+			     int alignment, int initial_domain,
+			     bool discardable, bool kernel,
+			     bool interruptible,
+			     struct drm_gem_object **obj)
+{
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r;
+
+	*obj = NULL;
+	gobj = drm_gem_object_alloc(rdev->ddev, size);
+	if (!gobj) {
+		return -ENOMEM;
+	}
+	/* At least align on page size */
+	if (alignment < PAGE_SIZE) {
+		alignment = PAGE_SIZE;
+	}
+	r = radeon_object_create(rdev, gobj, size, kernel, initial_domain,
+				 interruptible, &robj);
+	if (r) {
+		DRM_ERROR("Failed to allocate GEM object (%d, %d, %u)\n",
+			  size, initial_domain, alignment);
+		mutex_lock(&rdev->ddev->struct_mutex);
+		drm_gem_object_unreference(gobj);
+		mutex_unlock(&rdev->ddev->struct_mutex);
+		return r;
+	}
+	gobj->driver_private = robj;
+	*obj = gobj;
+	return 0;
+}
+
+int radeon_gem_object_pin(struct drm_gem_object *obj, uint32_t pin_domain,
+			  uint64_t *gpu_addr)
+{
+	struct radeon_object *robj = obj->driver_private;
+	uint32_t flags;
+
+	switch (pin_domain) {
+	case RADEON_GEM_DOMAIN_VRAM:
+		flags = TTM_PL_FLAG_VRAM;
+		break;
+	case RADEON_GEM_DOMAIN_GTT:
+		flags = TTM_PL_FLAG_TT;
+		break;
+	default:
+		flags = TTM_PL_FLAG_SYSTEM;
+		break;
+	}
+	return radeon_object_pin(robj, flags, gpu_addr);
+}
+
+void radeon_gem_object_unpin(struct drm_gem_object *obj)
+{
+	struct radeon_object *robj = obj->driver_private;
+	radeon_object_unpin(robj);
+}
+
+int radeon_gem_set_domain(struct drm_gem_object *gobj,
+			  uint32_t rdomain, uint32_t wdomain)
+{
+	struct radeon_object *robj;
+	uint32_t domain;
+	int r;
+
+	/* FIXME: reeimplement */
+	robj = gobj->driver_private;
+	/* work out where to validate the buffer to */
+	domain = wdomain;
+	if (!domain) {
+		domain = rdomain;
+	}
+	if (!domain) {
+		/* Do nothings */
+		printk(KERN_WARNING "Set domain withou domain !\n");
+		return 0;
+	}
+	if (domain == RADEON_GEM_DOMAIN_CPU) {
+		/* Asking for cpu access wait for object idle */
+		r = radeon_object_wait(robj);
+		if (r) {
+			printk(KERN_ERR "Failed to wait for object !\n");
+			return r;
+		}
+	}
+	return 0;
+}
+
+int radeon_gem_init(struct radeon_device *rdev)
+{
+	INIT_LIST_HEAD(&rdev->gem.objects);
+	return 0;
+}
+
+void radeon_gem_fini(struct radeon_device *rdev)
+{
+	radeon_object_force_delete(rdev);
+}
+
+
+/*
+ * GEM ioctls.
+ */
+int radeon_gem_info_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *filp)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_radeon_gem_info *args = data;
+
+	args->vram_size = rdev->mc.vram_size;
+	/* FIXME: report somethings that makes sense */
+	args->vram_visible = rdev->mc.vram_size - (4 * 1024 * 1024);
+	args->gart_size = rdev->mc.gtt_size;
+	return 0;
+}
+
+int radeon_gem_pread_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *filp)
+{
+	/* TODO: implement */
+	DRM_ERROR("unimplemented %s\n", __func__);
+	return -ENOSYS;
+}
+
+int radeon_gem_pwrite_ioctl(struct drm_device *dev, void *data,
+			    struct drm_file *filp)
+{
+	/* TODO: implement */
+	DRM_ERROR("unimplemented %s\n", __func__);
+	return -ENOSYS;
+}
+
+int radeon_gem_create_ioctl(struct drm_device *dev, void *data,
+			    struct drm_file *filp)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_radeon_gem_create *args = data;
+	struct drm_gem_object *gobj;
+	uint32_t handle;
+	int r;
+
+	/* create a gem object to contain this object in */
+	args->size = roundup(args->size, PAGE_SIZE);
+	r = radeon_gem_object_create(rdev, args->size, args->alignment,
+				     args->initial_domain, false,
+				     false, true, &gobj);
+	if (r) {
+		return r;
+	}
+	r = drm_gem_handle_create(filp, gobj, &handle);
+	if (r) {
+		mutex_lock(&dev->struct_mutex);
+		drm_gem_object_unreference(gobj);
+		mutex_unlock(&dev->struct_mutex);
+		return r;
+	}
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_handle_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	args->handle = handle;
+	return 0;
+}
+
+int radeon_gem_set_domain_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp)
+{
+	/* transition the BO to a domain -
+	 * just validate the BO into a certain domain */
+	struct drm_radeon_gem_set_domain *args = data;
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r;
+
+	/* for now if someone requests domain CPU -
+	 * just make sure the buffer is finished with */
+
+	/* just do a BO wait for now */
+	gobj = drm_gem_object_lookup(dev, filp, args->handle);
+	if (gobj == NULL) {
+		return -EINVAL;
+	}
+	robj = gobj->driver_private;
+
+	r = radeon_gem_set_domain(gobj, args->read_domains, args->write_domain);
+
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	return r;
+}
+
+int radeon_gem_mmap_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *filp)
+{
+	struct drm_radeon_gem_mmap *args = data;
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r;
+
+	gobj = drm_gem_object_lookup(dev, filp, args->handle);
+	if (gobj == NULL) {
+		return -EINVAL;
+	}
+	robj = gobj->driver_private;
+	r = radeon_object_mmap(robj, &args->addr_ptr);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	return r;
+}
+
+int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *filp)
+{
+	/* FIXME: implement */
+	return 0;
+}
+
+int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
+			      struct drm_file *filp)
+{
+	struct drm_radeon_gem_wait_idle *args = data;
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r;
+
+	gobj = drm_gem_object_lookup(dev, filp, args->handle);
+	if (gobj == NULL) {
+		return -EINVAL;
+	}
+	robj = gobj->driver_private;
+	r = radeon_object_wait(robj);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	return r;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
new file mode 100644
index 00000000000..71465ed2688
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+
+/**
+ * radeon_ddc_probe
+ *
+ */
+bool radeon_ddc_probe(struct radeon_connector *radeon_connector)
+{
+	u8 out_buf[] = { 0x0, 0x0};
+	u8 buf[2];
+	int ret;
+	struct i2c_msg msgs[] = {
+		{
+			.addr = 0x50,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = 0x50,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = buf,
+		}
+	};
+
+	ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
+	if (ret == 2)
+		return true;
+
+	return false;
+}
+
+
+void radeon_i2c_do_lock(struct radeon_connector *radeon_connector, int lock_state)
+{
+	struct radeon_device *rdev = radeon_connector->base.dev->dev_private;
+	uint32_t temp;
+	struct radeon_i2c_bus_rec *rec = &radeon_connector->ddc_bus->rec;
+
+	/* RV410 appears to have a bug where the hw i2c in reset
+	 * holds the i2c port in a bad state - switch hw i2c away before
+	 * doing DDC - do this for all r200s/r300s/r400s for safety sake
+	 */
+	if ((rdev->family >= CHIP_R200) && !ASIC_IS_AVIVO(rdev)) {
+		if (rec->a_clk_reg == RADEON_GPIO_MONID) {
+			WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST |
+						R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1)));
+		} else {
+			WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST |
+						R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3)));
+		}
+	}
+	if (lock_state) {
+		temp = RREG32(rec->a_clk_reg);
+		temp &= ~(rec->a_clk_mask);
+		WREG32(rec->a_clk_reg, temp);
+
+		temp = RREG32(rec->a_data_reg);
+		temp &= ~(rec->a_data_mask);
+		WREG32(rec->a_data_reg, temp);
+	}
+
+	temp = RREG32(rec->mask_clk_reg);
+	if (lock_state)
+		temp |= rec->mask_clk_mask;
+	else
+		temp &= ~rec->mask_clk_mask;
+	WREG32(rec->mask_clk_reg, temp);
+	temp = RREG32(rec->mask_clk_reg);
+
+	temp = RREG32(rec->mask_data_reg);
+	if (lock_state)
+		temp |= rec->mask_data_mask;
+	else
+		temp &= ~rec->mask_data_mask;
+	WREG32(rec->mask_data_reg, temp);
+	temp = RREG32(rec->mask_data_reg);
+}
+
+static int get_clock(void *i2c_priv)
+{
+	struct radeon_i2c_chan *i2c = i2c_priv;
+	struct radeon_device *rdev = i2c->dev->dev_private;
+	struct radeon_i2c_bus_rec *rec = &i2c->rec;
+	uint32_t val;
+
+	val = RREG32(rec->get_clk_reg);
+	val &= rec->get_clk_mask;
+
+	return (val != 0);
+}
+
+
+static int get_data(void *i2c_priv)
+{
+	struct radeon_i2c_chan *i2c = i2c_priv;
+	struct radeon_device *rdev = i2c->dev->dev_private;
+	struct radeon_i2c_bus_rec *rec = &i2c->rec;
+	uint32_t val;
+
+	val = RREG32(rec->get_data_reg);
+	val &= rec->get_data_mask;
+	return (val != 0);
+}
+
+static void set_clock(void *i2c_priv, int clock)
+{
+	struct radeon_i2c_chan *i2c = i2c_priv;
+	struct radeon_device *rdev = i2c->dev->dev_private;
+	struct radeon_i2c_bus_rec *rec = &i2c->rec;
+	uint32_t val;
+
+	val = RREG32(rec->put_clk_reg) & (uint32_t)~(rec->put_clk_mask);
+	val |= clock ? 0 : rec->put_clk_mask;
+	WREG32(rec->put_clk_reg, val);
+}
+
+static void set_data(void *i2c_priv, int data)
+{
+	struct radeon_i2c_chan *i2c = i2c_priv;
+	struct radeon_device *rdev = i2c->dev->dev_private;
+	struct radeon_i2c_bus_rec *rec = &i2c->rec;
+	uint32_t val;
+
+	val = RREG32(rec->put_data_reg) & (uint32_t)~(rec->put_data_mask);
+	val |= data ? 0 : rec->put_data_mask;
+	WREG32(rec->put_data_reg, val);
+}
+
+struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
+		struct radeon_i2c_bus_rec *rec,
+		const char *name)
+{
+	struct radeon_i2c_chan *i2c;
+	int ret;
+
+	i2c = drm_calloc(1, sizeof(struct radeon_i2c_chan), DRM_MEM_DRIVER);
+	if (i2c == NULL)
+		return NULL;
+
+	i2c->adapter.owner = THIS_MODULE;
+	i2c->adapter.algo_data = &i2c->algo;
+	i2c->dev = dev;
+	i2c->algo.setsda = set_data;
+	i2c->algo.setscl = set_clock;
+	i2c->algo.getsda = get_data;
+	i2c->algo.getscl = get_clock;
+	i2c->algo.udelay = 20;
+	/* vesa says 2.2 ms is enough, 1 jiffy doesn't seem to always
+	 * make this, 2 jiffies is a lot more reliable */
+	i2c->algo.timeout = 2;
+	i2c->algo.data = i2c;
+	i2c->rec = *rec;
+	i2c_set_adapdata(&i2c->adapter, i2c);
+
+	ret = i2c_bit_add_bus(&i2c->adapter);
+	if (ret) {
+		DRM_INFO("Failed to register i2c %s\n", name);
+		goto out_free;
+	}
+
+	return i2c;
+out_free:
+	drm_free(i2c, sizeof(struct radeon_i2c_chan), DRM_MEM_DRIVER);
+	return NULL;
+
+}
+
+void radeon_i2c_destroy(struct radeon_i2c_chan *i2c)
+{
+	if (!i2c)
+		return;
+
+	i2c_del_adapter(&i2c->adapter);
+	drm_free(i2c, sizeof(struct radeon_i2c_chan), DRM_MEM_DRIVER);
+}
+
+struct drm_encoder *radeon_best_encoder(struct drm_connector *connector)
+{
+	return NULL;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
new file mode 100644
index 00000000000..491d569deb0
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon_reg.h"
+#include "radeon_microcode.h"
+#include "radeon.h"
+#include "atom.h"
+
+static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
+{
+	uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
+	uint32_t irq_mask = RADEON_SW_INT_TEST;
+
+	if (irqs) {
+		WREG32(RADEON_GEN_INT_STATUS, irqs);
+	}
+	return irqs & irq_mask;
+}
+
+int r100_irq_set(struct radeon_device *rdev)
+{
+	uint32_t tmp = 0;
+
+	if (rdev->irq.sw_int) {
+		tmp |= RADEON_SW_INT_ENABLE;
+	}
+	/* Todo go through CRTC and enable vblank int or not */
+	WREG32(RADEON_GEN_INT_CNTL, tmp);
+	return 0;
+}
+
+int r100_irq_process(struct radeon_device *rdev)
+{
+	uint32_t status;
+
+	status = r100_irq_ack(rdev);
+	if (!status) {
+		return IRQ_NONE;
+	}
+	while (status) {
+		/* SW interrupt */
+		if (status & RADEON_SW_INT_TEST) {
+			radeon_fence_process(rdev);
+		}
+		status = r100_irq_ack(rdev);
+	}
+	return IRQ_HANDLED;
+}
+
+int rs600_irq_set(struct radeon_device *rdev)
+{
+	uint32_t tmp = 0;
+
+	if (rdev->irq.sw_int) {
+		tmp |= RADEON_SW_INT_ENABLE;
+	}
+	WREG32(RADEON_GEN_INT_CNTL, tmp);
+	/* Todo go through CRTC and enable vblank int or not */
+	WREG32(R500_DxMODE_INT_MASK, 0);
+	return 0;
+}
+
+irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS)
+{
+	struct drm_device *dev = (struct drm_device *) arg;
+	struct radeon_device *rdev = dev->dev_private;
+
+	return radeon_irq_process(rdev);
+}
+
+void radeon_driver_irq_preinstall_kms(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	unsigned i;
+
+	/* Disable *all* interrupts */
+	rdev->irq.sw_int = false;
+	for (i = 0; i < 2; i++) {
+		rdev->irq.crtc_vblank_int[i] = false;
+	}
+	radeon_irq_set(rdev);
+	/* Clear bits */
+	radeon_irq_process(rdev);
+}
+
+int radeon_driver_irq_postinstall_kms(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	dev->max_vblank_count = 0x001fffff;
+	rdev->irq.sw_int = true;
+	radeon_irq_set(rdev);
+	return 0;
+}
+
+void radeon_driver_irq_uninstall_kms(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	unsigned i;
+
+	if (rdev == NULL) {
+		return;
+	}
+	/* Disable *all* interrupts */
+	rdev->irq.sw_int = false;
+	for (i = 0; i < 2; i++) {
+		rdev->irq.crtc_vblank_int[i] = false;
+	}
+	radeon_irq_set(rdev);
+}
+
+int radeon_irq_kms_init(struct radeon_device *rdev)
+{
+	int r = 0;
+
+	r = drm_vblank_init(rdev->ddev, 2);
+	if (r) {
+		return r;
+	}
+	drm_irq_install(rdev->ddev);
+	rdev->irq.installed = true;
+	DRM_INFO("radeon: irq initialized.\n");
+	return 0;
+}
+
+void radeon_irq_kms_fini(struct radeon_device *rdev)
+{
+	if (rdev->irq.installed) {
+		rdev->irq.installed = false;
+		drm_irq_uninstall(rdev->ddev);
+	}
+}
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
new file mode 100644
index 00000000000..b0ce44b9f5a
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -0,0 +1,295 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "drm_sarea.h"
+#include "radeon.h"
+#include "radeon_drm.h"
+
+
+/*
+ * Driver load/unload
+ */
+int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
+{
+	struct radeon_device *rdev;
+	int r;
+
+	rdev = kzalloc(sizeof(struct radeon_device), GFP_KERNEL);
+	if (rdev == NULL) {
+		return -ENOMEM;
+	}
+	dev->dev_private = (void *)rdev;
+
+	/* update BUS flag */
+	if (drm_device_is_agp(dev)) {
+		flags |= RADEON_IS_AGP;
+	} else if (drm_device_is_pcie(dev)) {
+		flags |= RADEON_IS_PCIE;
+	} else {
+		flags |= RADEON_IS_PCI;
+	}
+
+	r = radeon_device_init(rdev, dev, dev->pdev, flags);
+	if (r) {
+		DRM_ERROR("Failed to initialize radeon, disabling IOCTL\n");
+		radeon_device_fini(rdev);
+		return r;
+	}
+	return 0;
+}
+
+int radeon_driver_unload_kms(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	radeon_device_fini(rdev);
+	kfree(rdev);
+	dev->dev_private = NULL;
+	return 0;
+}
+
+
+/*
+ * Userspace get informations ioctl
+ */
+int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_radeon_info *info;
+	uint32_t *value_ptr;
+	uint32_t value;
+
+	info = data;
+	value_ptr = (uint32_t *)((unsigned long)info->value);
+	switch (info->request) {
+	case RADEON_INFO_DEVICE_ID:
+		value = dev->pci_device;
+		break;
+	case RADEON_INFO_NUM_GB_PIPES:
+		value = rdev->num_gb_pipes;
+		break;
+	default:
+		DRM_DEBUG("Invalid request %d\n", info->request);
+		return -EINVAL;
+	}
+	if (DRM_COPY_TO_USER(value_ptr, &value, sizeof(uint32_t))) {
+		DRM_ERROR("copy_to_user\n");
+		return -EFAULT;
+	}
+	return 0;
+}
+
+
+/*
+ * Outdated mess for old drm with Xorg being in charge (void function now).
+ */
+int radeon_driver_firstopen_kms(struct drm_device *dev)
+{
+	return 0;
+}
+
+
+void radeon_driver_lastclose_kms(struct drm_device *dev)
+{
+}
+
+int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
+{
+	return 0;
+}
+
+void radeon_driver_postclose_kms(struct drm_device *dev,
+				 struct drm_file *file_priv)
+{
+}
+
+void radeon_driver_preclose_kms(struct drm_device *dev,
+				struct drm_file *file_priv)
+{
+}
+
+
+/*
+ * VBlank related functions.
+ */
+u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)
+{
+	/* FIXME: implement */
+	return 0;
+}
+
+int radeon_enable_vblank_kms(struct drm_device *dev, int crtc)
+{
+	/* FIXME: implement */
+	return 0;
+}
+
+void radeon_disable_vblank_kms(struct drm_device *dev, int crtc)
+{
+	/* FIXME: implement */
+}
+
+
+/*
+ * For multiple master (like multiple X).
+ */
+struct drm_radeon_master_private {
+	drm_local_map_t *sarea;
+	drm_radeon_sarea_t *sarea_priv;
+};
+
+int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master)
+{
+	struct drm_radeon_master_private *master_priv;
+	unsigned long sareapage;
+	int ret;
+
+	master_priv = drm_calloc(1, sizeof(*master_priv), DRM_MEM_DRIVER);
+	if (master_priv == NULL) {
+		return -ENOMEM;
+	}
+	/* prebuild the SAREA */
+	sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE);
+	ret = drm_addmap(dev, 0, sareapage, _DRM_SHM,
+			 _DRM_CONTAINS_LOCK|_DRM_DRIVER,
+			 &master_priv->sarea);
+	if (ret) {
+		DRM_ERROR("SAREA setup failed\n");
+		return ret;
+	}
+	master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea);
+	master_priv->sarea_priv->pfCurrentPage = 0;
+	master->driver_priv = master_priv;
+	return 0;
+}
+
+void radeon_master_destroy_kms(struct drm_device *dev,
+			       struct drm_master *master)
+{
+	struct drm_radeon_master_private *master_priv = master->driver_priv;
+
+	if (master_priv == NULL) {
+		return;
+	}
+	if (master_priv->sarea) {
+		drm_rmmap_locked(dev, master_priv->sarea);
+	}
+	drm_free(master_priv, sizeof(*master_priv), DRM_MEM_DRIVER);
+	master->driver_priv = NULL;
+}
+
+
+/*
+ * IOCTL.
+ */
+int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	/* Not valid in KMS. */
+	return -EINVAL;
+}
+
+#define KMS_INVALID_IOCTL(name)						\
+int name(struct drm_device *dev, void *data, struct drm_file *file_priv)\
+{									\
+	DRM_ERROR("invalid ioctl with kms %s\n", __func__);		\
+	return -EINVAL;							\
+}
+
+/*
+ * All these ioctls are invalid in kms world.
+ */
+KMS_INVALID_IOCTL(radeon_cp_init_kms)
+KMS_INVALID_IOCTL(radeon_cp_start_kms)
+KMS_INVALID_IOCTL(radeon_cp_stop_kms)
+KMS_INVALID_IOCTL(radeon_cp_reset_kms)
+KMS_INVALID_IOCTL(radeon_cp_idle_kms)
+KMS_INVALID_IOCTL(radeon_cp_resume_kms)
+KMS_INVALID_IOCTL(radeon_engine_reset_kms)
+KMS_INVALID_IOCTL(radeon_fullscreen_kms)
+KMS_INVALID_IOCTL(radeon_cp_swap_kms)
+KMS_INVALID_IOCTL(radeon_cp_clear_kms)
+KMS_INVALID_IOCTL(radeon_cp_vertex_kms)
+KMS_INVALID_IOCTL(radeon_cp_indices_kms)
+KMS_INVALID_IOCTL(radeon_cp_texture_kms)
+KMS_INVALID_IOCTL(radeon_cp_stipple_kms)
+KMS_INVALID_IOCTL(radeon_cp_indirect_kms)
+KMS_INVALID_IOCTL(radeon_cp_vertex2_kms)
+KMS_INVALID_IOCTL(radeon_cp_cmdbuf_kms)
+KMS_INVALID_IOCTL(radeon_cp_getparam_kms)
+KMS_INVALID_IOCTL(radeon_cp_flip_kms)
+KMS_INVALID_IOCTL(radeon_mem_alloc_kms)
+KMS_INVALID_IOCTL(radeon_mem_free_kms)
+KMS_INVALID_IOCTL(radeon_mem_init_heap_kms)
+KMS_INVALID_IOCTL(radeon_irq_emit_kms)
+KMS_INVALID_IOCTL(radeon_irq_wait_kms)
+KMS_INVALID_IOCTL(radeon_cp_setparam_kms)
+KMS_INVALID_IOCTL(radeon_surface_alloc_kms)
+KMS_INVALID_IOCTL(radeon_surface_free_kms)
+
+
+struct drm_ioctl_desc radeon_ioctls_kms[] = {
+	DRM_IOCTL_DEF(DRM_RADEON_CP_INIT, radeon_cp_init_kms, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF(DRM_RADEON_CP_START, radeon_cp_start_kms, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF(DRM_RADEON_CP_STOP, radeon_cp_stop_kms, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF(DRM_RADEON_CP_RESET, radeon_cp_reset_kms, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF(DRM_RADEON_CP_IDLE, radeon_cp_idle_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_CP_RESUME, radeon_cp_resume_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_RESET, radeon_engine_reset_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_FULLSCREEN, radeon_fullscreen_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_SWAP, radeon_cp_swap_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_CLEAR, radeon_cp_clear_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_VERTEX, radeon_cp_vertex_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_INDICES, radeon_cp_indices_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_TEXTURE, radeon_cp_texture_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_STIPPLE, radeon_cp_stipple_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_INDIRECT, radeon_cp_indirect_kms, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF(DRM_RADEON_VERTEX2, radeon_cp_vertex2_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_CMDBUF, radeon_cp_cmdbuf_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GETPARAM, radeon_cp_getparam_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_FLIP, radeon_cp_flip_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_ALLOC, radeon_mem_alloc_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_FREE, radeon_mem_free_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_INIT_HEAP, radeon_mem_init_heap_kms, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF(DRM_RADEON_IRQ_EMIT, radeon_irq_emit_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_IRQ_WAIT, radeon_irq_wait_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_SETPARAM, radeon_cp_setparam_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_SURF_ALLOC, radeon_surface_alloc_kms, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_SURF_FREE, radeon_surface_free_kms, DRM_AUTH),
+	/* KMS */
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_INFO, radeon_gem_info_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_CREATE, radeon_gem_create_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_MMAP, radeon_gem_mmap_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_DOMAIN, radeon_gem_set_domain_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_PREAD, radeon_gem_pread_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_PWRITE, radeon_gem_pwrite_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_WAIT_IDLE, radeon_gem_wait_idle_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_CS, radeon_cs_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH),
+};
+int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
new file mode 100644
index 00000000000..8086ecf7f03
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -0,0 +1,1276 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/radeon_drm.h>
+#include "radeon_fixed.h"
+#include "radeon.h"
+
+void radeon_restore_common_regs(struct drm_device *dev)
+{
+	/* don't need this yet */
+}
+
+static void radeon_pll_wait_for_read_update_complete(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	int i = 0;
+
+	/* FIXME: Certain revisions of R300 can't recover here.  Not sure of
+	   the cause yet, but this workaround will mask the problem for now.
+	   Other chips usually will pass at the very first test, so the
+	   workaround shouldn't have any effect on them. */
+	for (i = 0;
+	     (i < 10000 &&
+	      RREG32_PLL(RADEON_PPLL_REF_DIV) & RADEON_PPLL_ATOMIC_UPDATE_R);
+	     i++);
+}
+
+static void radeon_pll_write_update(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	while (RREG32_PLL(RADEON_PPLL_REF_DIV) & RADEON_PPLL_ATOMIC_UPDATE_R);
+
+	WREG32_PLL_P(RADEON_PPLL_REF_DIV,
+			   RADEON_PPLL_ATOMIC_UPDATE_W,
+			   ~(RADEON_PPLL_ATOMIC_UPDATE_W));
+}
+
+static void radeon_pll2_wait_for_read_update_complete(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	int i = 0;
+
+
+	/* FIXME: Certain revisions of R300 can't recover here.  Not sure of
+	   the cause yet, but this workaround will mask the problem for now.
+	   Other chips usually will pass at the very first test, so the
+	   workaround shouldn't have any effect on them. */
+	for (i = 0;
+	     (i < 10000 &&
+	      RREG32_PLL(RADEON_P2PLL_REF_DIV) & RADEON_P2PLL_ATOMIC_UPDATE_R);
+	     i++);
+}
+
+static void radeon_pll2_write_update(struct drm_device *dev)
+{
+	struct radeon_device *rdev = dev->dev_private;
+
+	while (RREG32_PLL(RADEON_P2PLL_REF_DIV) & RADEON_P2PLL_ATOMIC_UPDATE_R);
+
+	WREG32_PLL_P(RADEON_P2PLL_REF_DIV,
+			   RADEON_P2PLL_ATOMIC_UPDATE_W,
+			   ~(RADEON_P2PLL_ATOMIC_UPDATE_W));
+}
+
+static uint8_t radeon_compute_pll_gain(uint16_t ref_freq, uint16_t ref_div,
+				       uint16_t fb_div)
+{
+	unsigned int vcoFreq;
+
+	if (!ref_div)
+		return 1;
+
+	vcoFreq = ((unsigned)ref_freq & fb_div) / ref_div;
+
+	/*
+	 * This is horribly crude: the VCO frequency range is divided into
+	 * 3 parts, each part having a fixed PLL gain value.
+	 */
+	if (vcoFreq >= 30000)
+		/*
+		 * [300..max] MHz : 7
+		 */
+		return 7;
+	else if (vcoFreq >= 18000)
+		/*
+		 * [180..300) MHz : 4
+		 */
+		return 4;
+	else
+		/*
+		 * [0..180) MHz : 1
+		 */
+		return 1;
+}
+
+void radeon_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t mask;
+
+	if (radeon_crtc->crtc_id)
+		mask = (RADEON_CRTC2_EN |
+			RADEON_CRTC2_DISP_DIS |
+			RADEON_CRTC2_VSYNC_DIS |
+			RADEON_CRTC2_HSYNC_DIS |
+			RADEON_CRTC2_DISP_REQ_EN_B);
+	else
+		mask = (RADEON_CRTC_DISPLAY_DIS |
+			RADEON_CRTC_VSYNC_DIS |
+			RADEON_CRTC_HSYNC_DIS);
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		if (radeon_crtc->crtc_id)
+			WREG32_P(RADEON_CRTC2_GEN_CNTL, RADEON_CRTC2_EN, ~mask);
+		else {
+			WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_EN, ~(RADEON_CRTC_EN |
+									 RADEON_CRTC_DISP_REQ_EN_B));
+			WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask);
+		}
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		if (radeon_crtc->crtc_id)
+			WREG32_P(RADEON_CRTC2_GEN_CNTL, mask, ~mask);
+		else {
+			WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_DISP_REQ_EN_B, ~(RADEON_CRTC_EN |
+										    RADEON_CRTC_DISP_REQ_EN_B));
+			WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~mask);
+		}
+		break;
+	}
+
+	if (mode != DRM_MODE_DPMS_OFF) {
+		radeon_crtc_load_lut(crtc);
+	}
+}
+
+/* properly set crtc bpp when using atombios */
+void radeon_legacy_atom_set_surface(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	int format;
+	uint32_t crtc_gen_cntl;
+	uint32_t disp_merge_cntl;
+	uint32_t crtc_pitch;
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 15:      /*  555 */
+		format = 3;
+		break;
+	case 16:      /*  565 */
+		format = 4;
+		break;
+	case 24:      /*  RGB */
+		format = 5;
+		break;
+	case 32:      /* xRGB */
+		format = 6;
+		break;
+	default:
+		return;
+	}
+
+	crtc_pitch  = ((((crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8)) * crtc->fb->bits_per_pixel) +
+			((crtc->fb->bits_per_pixel * 8) - 1)) /
+		       (crtc->fb->bits_per_pixel * 8));
+	crtc_pitch |= crtc_pitch << 16;
+
+	WREG32(RADEON_CRTC_PITCH + radeon_crtc->crtc_offset, crtc_pitch);
+
+	switch (radeon_crtc->crtc_id) {
+	case 0:
+		disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL);
+		disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN;
+		WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl);
+
+		crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL) & 0xfffff0ff;
+		crtc_gen_cntl |= (format << 8);
+		crtc_gen_cntl |= RADEON_CRTC_EXT_DISP_EN;
+		WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl);
+		break;
+	case 1:
+		disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
+		disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
+		WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl);
+
+		crtc_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL) & 0xfffff0ff;
+		crtc_gen_cntl |= (format << 8);
+		WREG32(RADEON_CRTC2_GEN_CNTL, crtc_gen_cntl);
+		WREG32(RADEON_FP_H2_SYNC_STRT_WID,   RREG32(RADEON_CRTC2_H_SYNC_STRT_WID));
+		WREG32(RADEON_FP_V2_SYNC_STRT_WID,   RREG32(RADEON_CRTC2_V_SYNC_STRT_WID));
+		break;
+	}
+}
+
+int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+			 struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct radeon_framebuffer *radeon_fb;
+	struct drm_gem_object *obj;
+	uint64_t base;
+	uint32_t crtc_offset, crtc_offset_cntl, crtc_tile_x0_y0 = 0;
+	uint32_t crtc_pitch, pitch_pixels;
+
+	DRM_DEBUG("\n");
+
+	radeon_fb = to_radeon_framebuffer(crtc->fb);
+
+	obj = radeon_fb->obj;
+	if (radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &base)) {
+		return -EINVAL;
+	}
+	crtc_offset = (u32)base;
+	crtc_offset_cntl = 0;
+
+	pitch_pixels = crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8);
+	crtc_pitch  = (((pitch_pixels * crtc->fb->bits_per_pixel) +
+			((crtc->fb->bits_per_pixel * 8) - 1)) /
+		       (crtc->fb->bits_per_pixel * 8));
+	crtc_pitch |= crtc_pitch << 16;
+
+	/* TODO tiling */
+	if (0) {
+		if (ASIC_IS_R300(rdev))
+			crtc_offset_cntl |= (R300_CRTC_X_Y_MODE_EN |
+					     R300_CRTC_MICRO_TILE_BUFFER_DIS |
+					     R300_CRTC_MACRO_TILE_EN);
+		else
+			crtc_offset_cntl |= RADEON_CRTC_TILE_EN;
+	} else {
+		if (ASIC_IS_R300(rdev))
+			crtc_offset_cntl &= ~(R300_CRTC_X_Y_MODE_EN |
+					      R300_CRTC_MICRO_TILE_BUFFER_DIS |
+					      R300_CRTC_MACRO_TILE_EN);
+		else
+			crtc_offset_cntl &= ~RADEON_CRTC_TILE_EN;
+	}
+
+
+	/* TODO more tiling */
+	if (0) {
+		if (ASIC_IS_R300(rdev)) {
+			crtc_tile_x0_y0 = x | (y << 16);
+			base &= ~0x7ff;
+		} else {
+			int byteshift = crtc->fb->bits_per_pixel >> 4;
+			int tile_addr = (((y >> 3) * crtc->fb->width + x) >> (8 - byteshift)) << 11;
+			base += tile_addr + ((x << byteshift) % 256) + ((y % 8) << 8);
+			crtc_offset_cntl |= (y % 16);
+		}
+	} else {
+		int offset = y * pitch_pixels + x;
+		switch (crtc->fb->bits_per_pixel) {
+		case 15:
+		case 16:
+			offset *= 2;
+			break;
+		case 24:
+			offset *= 3;
+			break;
+		case 32:
+			offset *= 4;
+			break;
+		default:
+			return false;
+		}
+		base += offset;
+	}
+
+	base &= ~7;
+
+	/* update sarea TODO */
+
+	crtc_offset = (u32)base;
+
+	WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, rdev->mc.vram_location);
+
+	if (ASIC_IS_R300(rdev)) {
+		if (radeon_crtc->crtc_id)
+			WREG32(R300_CRTC2_TILE_X0_Y0, crtc_tile_x0_y0);
+		else
+			WREG32(R300_CRTC_TILE_X0_Y0, crtc_tile_x0_y0);
+	}
+	WREG32(RADEON_CRTC_OFFSET_CNTL + radeon_crtc->crtc_offset, crtc_offset_cntl);
+	WREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset, crtc_offset);
+	WREG32(RADEON_CRTC_PITCH + radeon_crtc->crtc_offset, crtc_pitch);
+
+	if (old_fb && old_fb != crtc->fb) {
+		radeon_fb = to_radeon_framebuffer(old_fb);
+		radeon_gem_object_unpin(radeon_fb->obj);
+	}
+	return 0;
+}
+
+static bool radeon_set_crtc_timing(struct drm_crtc *crtc, struct drm_display_mode *mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	int format;
+	int hsync_start;
+	int hsync_wid;
+	int vsync_wid;
+	uint32_t crtc_h_total_disp;
+	uint32_t crtc_h_sync_strt_wid;
+	uint32_t crtc_v_total_disp;
+	uint32_t crtc_v_sync_strt_wid;
+
+	DRM_DEBUG("\n");
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 15:      /*  555 */
+		format = 3;
+		break;
+	case 16:      /*  565 */
+		format = 4;
+		break;
+	case 24:      /*  RGB */
+		format = 5;
+		break;
+	case 32:      /* xRGB */
+		format = 6;
+		break;
+	default:
+		return false;
+	}
+
+	crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
+			     | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+	hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+	if (!hsync_wid)
+		hsync_wid = 1;
+	hsync_start = mode->crtc_hsync_start - 8;
+
+	crtc_h_sync_strt_wid = ((hsync_start & 0x1fff)
+				| ((hsync_wid & 0x3f) << 16)
+				| ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+				   ? RADEON_CRTC_H_SYNC_POL
+				   : 0));
+
+	/* This works for double scan mode. */
+	crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
+			     | ((mode->crtc_vdisplay - 1) << 16));
+
+	vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	if (!vsync_wid)
+		vsync_wid = 1;
+
+	crtc_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
+				| ((vsync_wid & 0x1f) << 16)
+				| ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+				   ? RADEON_CRTC_V_SYNC_POL
+				   : 0));
+
+	/* TODO -> Dell Server */
+	if (0) {
+		uint32_t disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
+		uint32_t tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
+		uint32_t dac2_cntl = RREG32(RADEON_DAC_CNTL2);
+		uint32_t crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+
+		dac2_cntl &= ~RADEON_DAC2_DAC_CLK_SEL;
+		dac2_cntl |= RADEON_DAC2_DAC2_CLK_SEL;
+
+		/* For CRT on DAC2, don't turn it on if BIOS didn't
+		   enable it, even it's detected.
+		*/
+		disp_hw_debug |= RADEON_CRT2_DISP1_SEL;
+		tv_dac_cntl &= ~((1<<2) | (3<<8) | (7<<24) | (0xff<<16));
+		tv_dac_cntl |= (0x03 | (2<<8) | (0x58<<16));
+
+		WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
+		WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+		WREG32(RADEON_DAC_CNTL2, dac2_cntl);
+		WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+	}
+
+	if (radeon_crtc->crtc_id) {
+		uint32_t crtc2_gen_cntl;
+		uint32_t disp2_merge_cntl;
+
+		/* check to see if TV DAC is enabled for another crtc and keep it enabled */
+		if (RREG32(RADEON_CRTC2_GEN_CNTL) & RADEON_CRTC2_CRT2_ON)
+			crtc2_gen_cntl = RADEON_CRTC2_CRT2_ON;
+		else
+			crtc2_gen_cntl = 0;
+
+		crtc2_gen_cntl |= ((format << 8)
+				   | RADEON_CRTC2_VSYNC_DIS
+				   | RADEON_CRTC2_HSYNC_DIS
+				   | RADEON_CRTC2_DISP_DIS
+				   | RADEON_CRTC2_DISP_REQ_EN_B
+				   | ((mode->flags & DRM_MODE_FLAG_DBLSCAN)
+				      ? RADEON_CRTC2_DBL_SCAN_EN
+				      : 0)
+				   | ((mode->flags & DRM_MODE_FLAG_CSYNC)
+				      ? RADEON_CRTC2_CSYNC_EN
+				      : 0)
+				   | ((mode->flags & DRM_MODE_FLAG_INTERLACE)
+				      ? RADEON_CRTC2_INTERLACE_EN
+				      : 0));
+
+		disp2_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
+		disp2_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
+
+		WREG32(RADEON_DISP2_MERGE_CNTL, disp2_merge_cntl);
+		WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+	} else {
+		uint32_t crtc_gen_cntl;
+		uint32_t crtc_ext_cntl;
+		uint32_t disp_merge_cntl;
+
+		crtc_gen_cntl = (RADEON_CRTC_EXT_DISP_EN
+				 | (format << 8)
+				 | RADEON_CRTC_DISP_REQ_EN_B
+				 | ((mode->flags & DRM_MODE_FLAG_DBLSCAN)
+				    ? RADEON_CRTC_DBL_SCAN_EN
+				    : 0)
+				 | ((mode->flags & DRM_MODE_FLAG_CSYNC)
+				    ? RADEON_CRTC_CSYNC_EN
+				    : 0)
+				 | ((mode->flags & DRM_MODE_FLAG_INTERLACE)
+				    ? RADEON_CRTC_INTERLACE_EN
+				    : 0));
+
+		crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
+		crtc_ext_cntl |= (RADEON_XCRT_CNT_EN |
+				  RADEON_CRTC_VSYNC_DIS |
+				  RADEON_CRTC_HSYNC_DIS |
+				  RADEON_CRTC_DISPLAY_DIS);
+
+		disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL);
+		disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN;
+
+		WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl);
+		WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl);
+		WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
+	}
+
+	WREG32(RADEON_CRTC_H_TOTAL_DISP + radeon_crtc->crtc_offset, crtc_h_total_disp);
+	WREG32(RADEON_CRTC_H_SYNC_STRT_WID + radeon_crtc->crtc_offset, crtc_h_sync_strt_wid);
+	WREG32(RADEON_CRTC_V_TOTAL_DISP + radeon_crtc->crtc_offset, crtc_v_total_disp);
+	WREG32(RADEON_CRTC_V_SYNC_STRT_WID + radeon_crtc->crtc_offset, crtc_v_sync_strt_wid);
+
+	return true;
+}
+
+static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_encoder *encoder;
+	uint32_t feedback_div = 0;
+	uint32_t frac_fb_div = 0;
+	uint32_t reference_div = 0;
+	uint32_t post_divider = 0;
+	uint32_t freq = 0;
+	uint8_t pll_gain;
+	int pll_flags = RADEON_PLL_LEGACY;
+	bool use_bios_divs = false;
+	/* PLL registers */
+	uint32_t pll_ref_div = 0;
+	uint32_t pll_fb_post_div = 0;
+	uint32_t htotal_cntl = 0;
+
+	struct radeon_pll *pll;
+
+	struct {
+		int divider;
+		int bitvalue;
+	} *post_div, post_divs[]   = {
+		/* From RAGE 128 VR/RAGE 128 GL Register
+		 * Reference Manual (Technical Reference
+		 * Manual P/N RRG-G04100-C Rev. 0.04), page
+		 * 3-17 (PLL_DIV_[3:0]).
+		 */
+		{  1, 0 },              /* VCLK_SRC                 */
+		{  2, 1 },              /* VCLK_SRC/2               */
+		{  4, 2 },              /* VCLK_SRC/4               */
+		{  8, 3 },              /* VCLK_SRC/8               */
+		{  3, 4 },              /* VCLK_SRC/3               */
+		{ 16, 5 },              /* VCLK_SRC/16              */
+		{  6, 6 },              /* VCLK_SRC/6               */
+		{ 12, 7 },              /* VCLK_SRC/12              */
+		{  0, 0 }
+	};
+
+	if (radeon_crtc->crtc_id)
+		pll = &rdev->clock.p2pll;
+	else
+		pll = &rdev->clock.p1pll;
+
+	if (mode->clock > 200000) /* range limits??? */
+		pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+	else
+		pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		if (encoder->crtc == crtc) {
+			if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
+				pll_flags |= RADEON_PLL_NO_ODD_POST_DIV;
+			if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) {
+				struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+				struct radeon_encoder_lvds *lvds = (struct radeon_encoder_lvds *)radeon_encoder->enc_priv;
+				if (lvds) {
+					if (lvds->use_bios_dividers) {
+						pll_ref_div = lvds->panel_ref_divider;
+						pll_fb_post_div   = (lvds->panel_fb_divider |
+								     (lvds->panel_post_divider << 16));
+						htotal_cntl  = 0;
+						use_bios_divs = true;
+					}
+				}
+				pll_flags |= RADEON_PLL_USE_REF_DIV;
+			}
+		}
+	}
+
+	DRM_DEBUG("\n");
+
+	if (!use_bios_divs) {
+		radeon_compute_pll(pll, mode->clock,
+				   &freq, &feedback_div, &frac_fb_div,
+				   &reference_div, &post_divider,
+				   pll_flags);
+
+		for (post_div = &post_divs[0]; post_div->divider; ++post_div) {
+			if (post_div->divider == post_divider)
+				break;
+		}
+
+		if (!post_div->divider)
+			post_div = &post_divs[0];
+
+		DRM_DEBUG("dc=%u, fd=%d, rd=%d, pd=%d\n",
+			  (unsigned)freq,
+			  feedback_div,
+			  reference_div,
+			  post_divider);
+
+		pll_ref_div   = reference_div;
+#if defined(__powerpc__) && (0) /* TODO */
+		/* apparently programming this otherwise causes a hang??? */
+		if (info->MacModel == RADEON_MAC_IBOOK)
+			pll_fb_post_div = 0x000600ad;
+		else
+#endif
+			pll_fb_post_div     = (feedback_div | (post_div->bitvalue << 16));
+
+		htotal_cntl    = mode->htotal & 0x7;
+
+	}
+
+	pll_gain = radeon_compute_pll_gain(pll->reference_freq,
+					   pll_ref_div & 0x3ff,
+					   pll_fb_post_div & 0x7ff);
+
+	if (radeon_crtc->crtc_id) {
+		uint32_t pixclks_cntl = ((RREG32_PLL(RADEON_PIXCLKS_CNTL) &
+					  ~(RADEON_PIX2CLK_SRC_SEL_MASK)) |
+					 RADEON_PIX2CLK_SRC_SEL_P2PLLCLK);
+
+		WREG32_PLL_P(RADEON_PIXCLKS_CNTL,
+			     RADEON_PIX2CLK_SRC_SEL_CPUCLK,
+			     ~(RADEON_PIX2CLK_SRC_SEL_MASK));
+
+		WREG32_PLL_P(RADEON_P2PLL_CNTL,
+			     RADEON_P2PLL_RESET
+			     | RADEON_P2PLL_ATOMIC_UPDATE_EN
+			     | ((uint32_t)pll_gain << RADEON_P2PLL_PVG_SHIFT),
+			     ~(RADEON_P2PLL_RESET
+			       | RADEON_P2PLL_ATOMIC_UPDATE_EN
+			       | RADEON_P2PLL_PVG_MASK));
+
+		WREG32_PLL_P(RADEON_P2PLL_REF_DIV,
+			     pll_ref_div,
+			     ~RADEON_P2PLL_REF_DIV_MASK);
+
+		WREG32_PLL_P(RADEON_P2PLL_DIV_0,
+			     pll_fb_post_div,
+			     ~RADEON_P2PLL_FB0_DIV_MASK);
+
+		WREG32_PLL_P(RADEON_P2PLL_DIV_0,
+			     pll_fb_post_div,
+			     ~RADEON_P2PLL_POST0_DIV_MASK);
+
+		radeon_pll2_write_update(dev);
+		radeon_pll2_wait_for_read_update_complete(dev);
+
+		WREG32_PLL(RADEON_HTOTAL2_CNTL, htotal_cntl);
+
+		WREG32_PLL_P(RADEON_P2PLL_CNTL,
+			     0,
+			     ~(RADEON_P2PLL_RESET
+			       | RADEON_P2PLL_SLEEP
+			       | RADEON_P2PLL_ATOMIC_UPDATE_EN));
+
+		DRM_DEBUG("Wrote2: 0x%08x 0x%08x 0x%08x (0x%08x)\n",
+			  (unsigned)pll_ref_div,
+			  (unsigned)pll_fb_post_div,
+			  (unsigned)htotal_cntl,
+			  RREG32_PLL(RADEON_P2PLL_CNTL));
+		DRM_DEBUG("Wrote2: rd=%u, fd=%u, pd=%u\n",
+			  (unsigned)pll_ref_div & RADEON_P2PLL_REF_DIV_MASK,
+			  (unsigned)pll_fb_post_div & RADEON_P2PLL_FB0_DIV_MASK,
+			  (unsigned)((pll_fb_post_div &
+				      RADEON_P2PLL_POST0_DIV_MASK) >> 16));
+
+		mdelay(50); /* Let the clock to lock */
+
+		WREG32_PLL_P(RADEON_PIXCLKS_CNTL,
+			     RADEON_PIX2CLK_SRC_SEL_P2PLLCLK,
+			     ~(RADEON_PIX2CLK_SRC_SEL_MASK));
+
+		WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
+	} else {
+		if (rdev->flags & RADEON_IS_MOBILITY) {
+			/* A temporal workaround for the occational blanking on certain laptop panels.
+			   This appears to related to the PLL divider registers (fail to lock?).
+			   It occurs even when all dividers are the same with their old settings.
+			   In this case we really don't need to fiddle with PLL registers.
+			   By doing this we can avoid the blanking problem with some panels.
+			*/
+			if ((pll_ref_div == (RREG32_PLL(RADEON_PPLL_REF_DIV) & RADEON_PPLL_REF_DIV_MASK)) &&
+			    (pll_fb_post_div == (RREG32_PLL(RADEON_PPLL_DIV_3) &
+						 (RADEON_PPLL_POST3_DIV_MASK | RADEON_PPLL_FB3_DIV_MASK)))) {
+				WREG32_P(RADEON_CLOCK_CNTL_INDEX,
+					 RADEON_PLL_DIV_SEL,
+					 ~(RADEON_PLL_DIV_SEL));
+				r100_pll_errata_after_index(rdev);
+				return;
+			}
+		}
+
+		WREG32_PLL_P(RADEON_VCLK_ECP_CNTL,
+			     RADEON_VCLK_SRC_SEL_CPUCLK,
+			     ~(RADEON_VCLK_SRC_SEL_MASK));
+		WREG32_PLL_P(RADEON_PPLL_CNTL,
+			     RADEON_PPLL_RESET
+			     | RADEON_PPLL_ATOMIC_UPDATE_EN
+			     | RADEON_PPLL_VGA_ATOMIC_UPDATE_EN
+			     | ((uint32_t)pll_gain << RADEON_PPLL_PVG_SHIFT),
+			     ~(RADEON_PPLL_RESET
+			       | RADEON_PPLL_ATOMIC_UPDATE_EN
+			       | RADEON_PPLL_VGA_ATOMIC_UPDATE_EN
+			       | RADEON_PPLL_PVG_MASK));
+
+		WREG32_P(RADEON_CLOCK_CNTL_INDEX,
+			 RADEON_PLL_DIV_SEL,
+			 ~(RADEON_PLL_DIV_SEL));
+		r100_pll_errata_after_index(rdev);
+
+		if (ASIC_IS_R300(rdev) ||
+		    (rdev->family == CHIP_RS300) ||
+		    (rdev->family == CHIP_RS400) ||
+		    (rdev->family == CHIP_RS480)) {
+			if (pll_ref_div & R300_PPLL_REF_DIV_ACC_MASK) {
+				/* When restoring console mode, use saved PPLL_REF_DIV
+				 * setting.
+				 */
+				WREG32_PLL_P(RADEON_PPLL_REF_DIV,
+					     pll_ref_div,
+					     0);
+			} else {
+				/* R300 uses ref_div_acc field as real ref divider */
+				WREG32_PLL_P(RADEON_PPLL_REF_DIV,
+					     (pll_ref_div << R300_PPLL_REF_DIV_ACC_SHIFT),
+					     ~R300_PPLL_REF_DIV_ACC_MASK);
+			}
+		} else
+			WREG32_PLL_P(RADEON_PPLL_REF_DIV,
+				     pll_ref_div,
+				     ~RADEON_PPLL_REF_DIV_MASK);
+
+		WREG32_PLL_P(RADEON_PPLL_DIV_3,
+			     pll_fb_post_div,
+			     ~RADEON_PPLL_FB3_DIV_MASK);
+
+		WREG32_PLL_P(RADEON_PPLL_DIV_3,
+			     pll_fb_post_div,
+			     ~RADEON_PPLL_POST3_DIV_MASK);
+
+		radeon_pll_write_update(dev);
+		radeon_pll_wait_for_read_update_complete(dev);
+
+		WREG32_PLL(RADEON_HTOTAL_CNTL, htotal_cntl);
+
+		WREG32_PLL_P(RADEON_PPLL_CNTL,
+			     0,
+			     ~(RADEON_PPLL_RESET
+			       | RADEON_PPLL_SLEEP
+			       | RADEON_PPLL_ATOMIC_UPDATE_EN
+			       | RADEON_PPLL_VGA_ATOMIC_UPDATE_EN));
+
+		DRM_DEBUG("Wrote: 0x%08x 0x%08x 0x%08x (0x%08x)\n",
+			  pll_ref_div,
+			  pll_fb_post_div,
+			  (unsigned)htotal_cntl,
+			  RREG32_PLL(RADEON_PPLL_CNTL));
+		DRM_DEBUG("Wrote: rd=%d, fd=%d, pd=%d\n",
+			  pll_ref_div & RADEON_PPLL_REF_DIV_MASK,
+			  pll_fb_post_div & RADEON_PPLL_FB3_DIV_MASK,
+			  (pll_fb_post_div & RADEON_PPLL_POST3_DIV_MASK) >> 16);
+
+		mdelay(50); /* Let the clock to lock */
+
+		WREG32_PLL_P(RADEON_VCLK_ECP_CNTL,
+			     RADEON_VCLK_SRC_SEL_PPLLCLK,
+			     ~(RADEON_VCLK_SRC_SEL_MASK));
+
+	}
+}
+
+static bool radeon_crtc_mode_fixup(struct drm_crtc *crtc,
+				   struct drm_display_mode *mode,
+				   struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static int radeon_crtc_mode_set(struct drm_crtc *crtc,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode,
+				 int x, int y, struct drm_framebuffer *old_fb)
+{
+
+	DRM_DEBUG("\n");
+
+	/* TODO TV */
+
+	radeon_crtc_set_base(crtc, x, y, old_fb);
+	radeon_set_crtc_timing(crtc, adjusted_mode);
+	radeon_set_pll(crtc, adjusted_mode);
+	radeon_init_disp_bandwidth(crtc->dev);
+
+	return 0;
+}
+
+static void radeon_crtc_prepare(struct drm_crtc *crtc)
+{
+	radeon_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void radeon_crtc_commit(struct drm_crtc *crtc)
+{
+	radeon_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+static const struct drm_crtc_helper_funcs legacy_helper_funcs = {
+	.dpms = radeon_crtc_dpms,
+	.mode_fixup = radeon_crtc_mode_fixup,
+	.mode_set = radeon_crtc_mode_set,
+	.mode_set_base = radeon_crtc_set_base,
+	.prepare = radeon_crtc_prepare,
+	.commit = radeon_crtc_commit,
+};
+
+
+void radeon_legacy_init_crtc(struct drm_device *dev,
+			       struct radeon_crtc *radeon_crtc)
+{
+	if (radeon_crtc->crtc_id == 1)
+		radeon_crtc->crtc_offset = RADEON_CRTC2_H_TOTAL_DISP - RADEON_CRTC_H_TOTAL_DISP;
+	drm_crtc_helper_add(&radeon_crtc->base, &legacy_helper_funcs);
+}
+
+void radeon_init_disp_bw_legacy(struct drm_device *dev,
+				struct drm_display_mode *mode1,
+				uint32_t pixel_bytes1,
+				struct drm_display_mode *mode2,
+				uint32_t pixel_bytes2)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
+	fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
+	fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
+	uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
+	fixed20_12 memtcas_ff[8] = {
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(0),
+		fixed_init_half(1),
+		fixed_init_half(2),
+		fixed_init(0),
+	};
+	fixed20_12 memtcas_rs480_ff[8] = {
+		fixed_init(0),
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(0),
+		fixed_init_half(1),
+		fixed_init_half(2),
+		fixed_init_half(3),
+	};
+	fixed20_12 memtcas2_ff[8] = {
+		fixed_init(0),
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(4),
+		fixed_init(5),
+		fixed_init(6),
+		fixed_init(7),
+	};
+	fixed20_12 memtrbs[8] = {
+		fixed_init(1),
+		fixed_init_half(1),
+		fixed_init(2),
+		fixed_init_half(2),
+		fixed_init(3),
+		fixed_init_half(3),
+		fixed_init(4),
+		fixed_init_half(4)
+	};
+	fixed20_12 memtrbs_r4xx[8] = {
+		fixed_init(4),
+		fixed_init(5),
+		fixed_init(6),
+		fixed_init(7),
+		fixed_init(8),
+		fixed_init(9),
+		fixed_init(10),
+		fixed_init(11)
+	};
+	fixed20_12 min_mem_eff;
+	fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
+	fixed20_12 cur_latency_mclk, cur_latency_sclk;
+	fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
+		disp_drain_rate2, read_return_rate;
+	fixed20_12 time_disp1_drop_priority;
+	int c;
+	int cur_size = 16;       /* in octawords */
+	int critical_point = 0, critical_point2;
+/* 	uint32_t read_return_rate, time_disp1_drop_priority; */
+	int stop_req, max_stop_req;
+
+	min_mem_eff.full = rfixed_const_8(0);
+	/* get modes */
+	if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
+		uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
+		mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
+		mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
+		/* check crtc enables */
+		if (mode2)
+			mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
+		if (mode1)
+			mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
+		WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
+	}
+
+	/*
+	 * determine is there is enough bw for current mode
+	 */
+	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
+	temp_ff.full = rfixed_const(100);
+	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
+	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
+	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+
+	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
+	temp_ff.full = rfixed_const(temp);
+	mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
+
+	pix_clk.full = 0;
+	pix_clk2.full = 0;
+	peak_disp_bw.full = 0;
+	if (mode1) {
+		temp_ff.full = rfixed_const(1000);
+		pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
+		pix_clk.full = rfixed_div(pix_clk, temp_ff);
+		temp_ff.full = rfixed_const(pixel_bytes1);
+		peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
+	}
+	if (mode2) {
+		temp_ff.full = rfixed_const(1000);
+		pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
+		pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
+		temp_ff.full = rfixed_const(pixel_bytes2);
+		peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
+	}
+
+	mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
+	if (peak_disp_bw.full >= mem_bw.full) {
+		DRM_ERROR("You may not have enough display bandwidth for current mode\n"
+			  "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
+	}
+
+	/*  Get values from the EXT_MEM_CNTL register...converting its contents. */
+	temp = RREG32(RADEON_MEM_TIMING_CNTL);
+	if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
+		mem_trcd = ((temp >> 2) & 0x3) + 1;
+		mem_trp  = ((temp & 0x3)) + 1;
+		mem_tras = ((temp & 0x70) >> 4) + 1;
+	} else if (rdev->family == CHIP_R300 ||
+		   rdev->family == CHIP_R350) { /* r300, r350 */
+		mem_trcd = (temp & 0x7) + 1;
+		mem_trp = ((temp >> 8) & 0x7) + 1;
+		mem_tras = ((temp >> 11) & 0xf) + 4;
+	} else if (rdev->family == CHIP_RV350 ||
+		   rdev->family <= CHIP_RV380) {
+		/* rv3x0 */
+		mem_trcd = (temp & 0x7) + 3;
+		mem_trp = ((temp >> 8) & 0x7) + 3;
+		mem_tras = ((temp >> 11) & 0xf) + 6;
+	} else if (rdev->family == CHIP_R420 ||
+		   rdev->family == CHIP_R423 ||
+		   rdev->family == CHIP_RV410) {
+		/* r4xx */
+		mem_trcd = (temp & 0xf) + 3;
+		if (mem_trcd > 15)
+			mem_trcd = 15;
+		mem_trp = ((temp >> 8) & 0xf) + 3;
+		if (mem_trp > 15)
+			mem_trp = 15;
+		mem_tras = ((temp >> 12) & 0x1f) + 6;
+		if (mem_tras > 31)
+			mem_tras = 31;
+	} else { /* RV200, R200 */
+		mem_trcd = (temp & 0x7) + 1;
+		mem_trp = ((temp >> 8) & 0x7) + 1;
+		mem_tras = ((temp >> 12) & 0xf) + 4;
+	}
+	/* convert to FF */
+	trcd_ff.full = rfixed_const(mem_trcd);
+	trp_ff.full = rfixed_const(mem_trp);
+	tras_ff.full = rfixed_const(mem_tras);
+
+	/* Get values from the MEM_SDRAM_MODE_REG register...converting its */
+	temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
+	data = (temp & (7 << 20)) >> 20;
+	if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
+		if (rdev->family == CHIP_RS480) /* don't think rs400 */
+			tcas_ff = memtcas_rs480_ff[data];
+		else
+			tcas_ff = memtcas_ff[data];
+	} else
+		tcas_ff = memtcas2_ff[data];
+
+	if (rdev->family == CHIP_RS400 ||
+	    rdev->family == CHIP_RS480) {
+		/* extra cas latency stored in bits 23-25 0-4 clocks */
+		data = (temp >> 23) & 0x7;
+		if (data < 5)
+			tcas_ff.full += rfixed_const(data);
+	}
+
+	if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
+		/* on the R300, Tcas is included in Trbs.
+		 */
+		temp = RREG32(RADEON_MEM_CNTL);
+		data = (R300_MEM_NUM_CHANNELS_MASK & temp);
+		if (data == 1) {
+			if (R300_MEM_USE_CD_CH_ONLY & temp) {
+				temp = RREG32(R300_MC_IND_INDEX);
+				temp &= ~R300_MC_IND_ADDR_MASK;
+				temp |= R300_MC_READ_CNTL_CD_mcind;
+				WREG32(R300_MC_IND_INDEX, temp);
+				temp = RREG32(R300_MC_IND_DATA);
+				data = (R300_MEM_RBS_POSITION_C_MASK & temp);
+			} else {
+				temp = RREG32(R300_MC_READ_CNTL_AB);
+				data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+			}
+		} else {
+			temp = RREG32(R300_MC_READ_CNTL_AB);
+			data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+		}
+		if (rdev->family == CHIP_RV410 ||
+		    rdev->family == CHIP_R420 ||
+		    rdev->family == CHIP_R423)
+			trbs_ff = memtrbs_r4xx[data];
+		else
+			trbs_ff = memtrbs[data];
+		tcas_ff.full += trbs_ff.full;
+	}
+
+	sclk_eff_ff.full = sclk_ff.full;
+
+	if (rdev->flags & RADEON_IS_AGP) {
+		fixed20_12 agpmode_ff;
+		agpmode_ff.full = rfixed_const(radeon_agpmode);
+		temp_ff.full = rfixed_const_666(16);
+		sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
+	}
+	/* TODO PCIE lanes may affect this - agpmode == 16?? */
+
+	if (ASIC_IS_R300(rdev)) {
+		sclk_delay_ff.full = rfixed_const(250);
+	} else {
+		if ((rdev->family == CHIP_RV100) ||
+		    rdev->flags & RADEON_IS_IGP) {
+			if (rdev->mc.vram_is_ddr)
+				sclk_delay_ff.full = rfixed_const(41);
+			else
+				sclk_delay_ff.full = rfixed_const(33);
+		} else {
+			if (rdev->mc.vram_width == 128)
+				sclk_delay_ff.full = rfixed_const(57);
+			else
+				sclk_delay_ff.full = rfixed_const(41);
+		}
+	}
+
+	mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
+
+	if (rdev->mc.vram_is_ddr) {
+		if (rdev->mc.vram_width == 32) {
+			k1.full = rfixed_const(40);
+			c  = 3;
+		} else {
+			k1.full = rfixed_const(20);
+			c  = 1;
+		}
+	} else {
+		k1.full = rfixed_const(40);
+		c  = 3;
+	}
+
+	temp_ff.full = rfixed_const(2);
+	mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
+	temp_ff.full = rfixed_const(c);
+	mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
+	temp_ff.full = rfixed_const(4);
+	mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
+	mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
+	mc_latency_mclk.full += k1.full;
+
+	mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
+	mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
+
+	/*
+	  HW cursor time assuming worst case of full size colour cursor.
+	*/
+	temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
+	temp_ff.full += trcd_ff.full;
+	if (temp_ff.full < tras_ff.full)
+		temp_ff.full = tras_ff.full;
+	cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
+
+	temp_ff.full = rfixed_const(cur_size);
+	cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
+	/*
+	  Find the total latency for the display data.
+	*/
+	disp_latency_overhead.full = rfixed_const(80);
+	disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
+	mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
+	mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
+
+	if (mc_latency_mclk.full > mc_latency_sclk.full)
+		disp_latency.full = mc_latency_mclk.full;
+	else
+		disp_latency.full = mc_latency_sclk.full;
+
+	/* setup Max GRPH_STOP_REQ default value */
+	if (ASIC_IS_RV100(rdev))
+		max_stop_req = 0x5c;
+	else
+		max_stop_req = 0x7c;
+
+	if (mode1) {
+		/*  CRTC1
+		    Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
+		    GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
+		*/
+		stop_req = mode1->hdisplay * pixel_bytes1 / 16;
+
+		if (stop_req > max_stop_req)
+			stop_req = max_stop_req;
+
+		/*
+		  Find the drain rate of the display buffer.
+		*/
+		temp_ff.full = rfixed_const((16/pixel_bytes1));
+		disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
+
+		/*
+		  Find the critical point of the display buffer.
+		*/
+		crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
+		crit_point_ff.full += rfixed_const_half(0);
+
+		critical_point = rfixed_trunc(crit_point_ff);
+
+		if (rdev->disp_priority == 2) {
+			critical_point = 0;
+		}
+
+		/*
+		  The critical point should never be above max_stop_req-4.  Setting
+		  GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
+		*/
+		if (max_stop_req - critical_point < 4)
+			critical_point = 0;
+
+		if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
+			/* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
+			critical_point = 0x10;
+		}
+
+		temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
+		temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
+		temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+		temp &= ~(RADEON_GRPH_START_REQ_MASK);
+		if ((rdev->family == CHIP_R350) &&
+		    (stop_req > 0x15)) {
+			stop_req -= 0x10;
+		}
+		temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+		temp |= RADEON_GRPH_BUFFER_SIZE;
+		temp &= ~(RADEON_GRPH_CRITICAL_CNTL   |
+			  RADEON_GRPH_CRITICAL_AT_SOF |
+			  RADEON_GRPH_STOP_CNTL);
+		/*
+		  Write the result into the register.
+		*/
+		WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+						       (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+#if 0
+		if ((rdev->family == CHIP_RS400) ||
+		    (rdev->family == CHIP_RS480)) {
+			/* attempt to program RS400 disp regs correctly ??? */
+			temp = RREG32(RS400_DISP1_REG_CNTL);
+			temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
+				  RS400_DISP1_STOP_REQ_LEVEL_MASK);
+			WREG32(RS400_DISP1_REQ_CNTL1, (temp |
+						       (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+						       (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+			temp = RREG32(RS400_DMIF_MEM_CNTL1);
+			temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
+				  RS400_DISP1_CRITICAL_POINT_STOP_MASK);
+			WREG32(RS400_DMIF_MEM_CNTL1, (temp |
+						      (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
+						      (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
+		}
+#endif
+
+		DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
+			  /* 	  (unsigned int)info->SavedReg->grph_buffer_cntl, */
+			  (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
+	}
+
+	if (mode2) {
+		u32 grph2_cntl;
+		stop_req = mode2->hdisplay * pixel_bytes2 / 16;
+
+		if (stop_req > max_stop_req)
+			stop_req = max_stop_req;
+
+		/*
+		  Find the drain rate of the display buffer.
+		*/
+		temp_ff.full = rfixed_const((16/pixel_bytes2));
+		disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
+
+		grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
+		grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
+		grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+		grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
+		if ((rdev->family == CHIP_R350) &&
+		    (stop_req > 0x15)) {
+			stop_req -= 0x10;
+		}
+		grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+		grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
+		grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL   |
+			  RADEON_GRPH_CRITICAL_AT_SOF |
+			  RADEON_GRPH_STOP_CNTL);
+
+		if ((rdev->family == CHIP_RS100) ||
+		    (rdev->family == CHIP_RS200))
+			critical_point2 = 0;
+		else {
+			temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
+			temp_ff.full = rfixed_const(temp);
+			temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
+			if (sclk_ff.full < temp_ff.full)
+				temp_ff.full = sclk_ff.full;
+
+			read_return_rate.full = temp_ff.full;
+
+			if (mode1) {
+				temp_ff.full = read_return_rate.full - disp_drain_rate.full;
+				time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
+			} else {
+				time_disp1_drop_priority.full = 0;
+			}
+			crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
+			crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
+			crit_point_ff.full += rfixed_const_half(0);
+
+			critical_point2 = rfixed_trunc(crit_point_ff);
+
+			if (rdev->disp_priority == 2) {
+				critical_point2 = 0;
+			}
+
+			if (max_stop_req - critical_point2 < 4)
+				critical_point2 = 0;
+
+		}
+
+		if (critical_point2 == 0 && rdev->family == CHIP_R300) {
+			/* some R300 cards have problem with this set to 0 */
+			critical_point2 = 0x10;
+		}
+
+		WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+						  (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+		if ((rdev->family == CHIP_RS400) ||
+		    (rdev->family == CHIP_RS480)) {
+#if 0
+			/* attempt to program RS400 disp2 regs correctly ??? */
+			temp = RREG32(RS400_DISP2_REQ_CNTL1);
+			temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
+				  RS400_DISP2_STOP_REQ_LEVEL_MASK);
+			WREG32(RS400_DISP2_REQ_CNTL1, (temp |
+						       (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+						       (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+			temp = RREG32(RS400_DISP2_REQ_CNTL2);
+			temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
+				  RS400_DISP2_CRITICAL_POINT_STOP_MASK);
+			WREG32(RS400_DISP2_REQ_CNTL2, (temp |
+						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
+						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
+#endif
+			WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
+			WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
+			WREG32(RS400_DMIF_MEM_CNTL1,  0x29CA71DC);
+			WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
+		}
+
+		DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
+			  (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
+	}
+}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
new file mode 100644
index 00000000000..2c2f42de1d4
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -0,0 +1,1288 @@
+/*
+ * Copyright 2007-8 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ */
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+#include "radeon_drm.h"
+#include "radeon.h"
+#include "atom.h"
+
+
+static void radeon_legacy_rmx_mode_set(struct drm_encoder *encoder,
+				       struct drm_display_mode *mode,
+				       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	int    xres = mode->hdisplay;
+	int    yres = mode->vdisplay;
+	bool   hscale = true, vscale = true;
+	int    hsync_wid;
+	int    vsync_wid;
+	int    hsync_start;
+	uint32_t scale, inc;
+	uint32_t fp_horz_stretch, fp_vert_stretch, crtc_more_cntl, fp_horz_vert_active;
+	uint32_t fp_h_sync_strt_wid, fp_v_sync_strt_wid, fp_crtc_h_total_disp, fp_crtc_v_total_disp;
+	struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
+
+	DRM_DEBUG("\n");
+
+	fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
+		(RADEON_VERT_STRETCH_RESERVED |
+		 RADEON_VERT_AUTO_RATIO_INC);
+	fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
+		(RADEON_HORZ_FP_LOOP_STRETCH |
+		 RADEON_HORZ_AUTO_RATIO_INC);
+
+	crtc_more_cntl = 0;
+	if ((rdev->family == CHIP_RS100) ||
+	    (rdev->family == CHIP_RS200)) {
+		/* This is to workaround the asic bug for RMX, some versions
+		   of BIOS dosen't have this register initialized correctly. */
+		crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
+	}
+
+
+	fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
+				| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+	hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+	if (!hsync_wid)
+		hsync_wid = 1;
+	hsync_start = mode->crtc_hsync_start - 8;
+
+	fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
+			      | ((hsync_wid & 0x3f) << 16)
+			      | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+				 ? RADEON_CRTC_H_SYNC_POL
+				 : 0));
+
+	fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
+				| ((mode->crtc_vdisplay - 1) << 16));
+
+	vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	if (!vsync_wid)
+		vsync_wid = 1;
+
+	fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
+			      | ((vsync_wid & 0x1f) << 16)
+			      | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+				 ? RADEON_CRTC_V_SYNC_POL
+				 : 0));
+
+	fp_horz_vert_active = 0;
+
+	if (native_mode->panel_xres == 0 ||
+	    native_mode->panel_yres == 0) {
+		hscale = false;
+		vscale = false;
+	} else {
+		if (xres > native_mode->panel_xres)
+			xres = native_mode->panel_xres;
+		if (yres > native_mode->panel_yres)
+			yres = native_mode->panel_yres;
+
+		if (xres == native_mode->panel_xres)
+			hscale = false;
+		if (yres == native_mode->panel_yres)
+			vscale = false;
+	}
+
+	if (radeon_encoder->flags & RADEON_USE_RMX) {
+		if (radeon_encoder->rmx_type != RMX_CENTER) {
+			if (!hscale)
+				fp_horz_stretch |= ((xres/8-1) << 16);
+			else {
+				inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
+				scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
+					/ native_mode->panel_xres + 1;
+				fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
+						    RADEON_HORZ_STRETCH_BLEND |
+						    RADEON_HORZ_STRETCH_ENABLE |
+						    ((native_mode->panel_xres/8-1) << 16));
+			}
+
+			if (!vscale)
+				fp_vert_stretch |= ((yres-1) << 12);
+			else {
+				inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
+				scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
+					/ native_mode->panel_yres + 1;
+				fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
+						    RADEON_VERT_STRETCH_ENABLE |
+						    RADEON_VERT_STRETCH_BLEND |
+						    ((native_mode->panel_yres-1) << 12));
+			}
+		} else if (radeon_encoder->rmx_type == RMX_CENTER) {
+			int    blank_width;
+
+			fp_horz_stretch |= ((xres/8-1) << 16);
+			fp_vert_stretch |= ((yres-1) << 12);
+
+			crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
+					   RADEON_CRTC_AUTO_VERT_CENTER_EN);
+
+			blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
+			if (blank_width > 110)
+				blank_width = 110;
+
+			fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
+						| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+			hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+			if (!hsync_wid)
+				hsync_wid = 1;
+
+			fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
+					      | ((hsync_wid & 0x3f) << 16)
+					      | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+						 ? RADEON_CRTC_H_SYNC_POL
+						 : 0));
+
+			fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
+						| ((mode->crtc_vdisplay - 1) << 16));
+
+			vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+			if (!vsync_wid)
+				vsync_wid = 1;
+
+			fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
+					       | ((vsync_wid & 0x1f) << 16)
+					       | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+						  ? RADEON_CRTC_V_SYNC_POL
+						  : 0)));
+
+			fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
+					       (((native_mode->panel_xres / 8) & 0x1ff) << 16));
+		}
+	} else {
+		fp_horz_stretch |= ((xres/8-1) << 16);
+		fp_vert_stretch |= ((yres-1) << 12);
+	}
+
+	WREG32(RADEON_FP_HORZ_STRETCH,      fp_horz_stretch);
+	WREG32(RADEON_FP_VERT_STRETCH,      fp_vert_stretch);
+	WREG32(RADEON_CRTC_MORE_CNTL,       crtc_more_cntl);
+	WREG32(RADEON_FP_HORZ_VERT_ACTIVE,  fp_horz_vert_active);
+	WREG32(RADEON_FP_H_SYNC_STRT_WID,   fp_h_sync_strt_wid);
+	WREG32(RADEON_FP_V_SYNC_STRT_WID,   fp_v_sync_strt_wid);
+	WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
+	WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
+
+}
+
+static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t lvds_gen_cntl, lvds_pll_cntl, pixclks_cntl, disp_pwr_man;
+	int panel_pwr_delay = 2000;
+	DRM_DEBUG("\n");
+
+	if (radeon_encoder->enc_priv) {
+		if (rdev->is_atom_bios) {
+			struct radeon_encoder_atom_dig *lvds = radeon_encoder->enc_priv;
+			panel_pwr_delay = lvds->panel_pwr_delay;
+		} else {
+			struct radeon_encoder_lvds *lvds = radeon_encoder->enc_priv;
+			panel_pwr_delay = lvds->panel_pwr_delay;
+		}
+	}
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		disp_pwr_man = RREG32(RADEON_DISP_PWR_MAN);
+		disp_pwr_man |= RADEON_AUTO_PWRUP_EN;
+		WREG32(RADEON_DISP_PWR_MAN, disp_pwr_man);
+		lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
+		lvds_pll_cntl |= RADEON_LVDS_PLL_EN;
+		WREG32(RADEON_LVDS_PLL_CNTL, lvds_pll_cntl);
+		udelay(1000);
+
+		lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
+		lvds_pll_cntl &= ~RADEON_LVDS_PLL_RESET;
+		WREG32(RADEON_LVDS_PLL_CNTL, lvds_pll_cntl);
+
+		lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
+		lvds_gen_cntl |= (RADEON_LVDS_ON | RADEON_LVDS_EN | RADEON_LVDS_DIGON | RADEON_LVDS_BLON);
+		lvds_gen_cntl &= ~(RADEON_LVDS_DISPLAY_DIS);
+		udelay(panel_pwr_delay * 1000);
+		WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL);
+		WREG32_PLL_P(RADEON_PIXCLKS_CNTL, 0, ~RADEON_PIXCLK_LVDS_ALWAYS_ONb);
+		lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
+		lvds_gen_cntl |= RADEON_LVDS_DISPLAY_DIS;
+		lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+		udelay(panel_pwr_delay * 1000);
+		WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+		WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
+		break;
+	}
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+	else
+		radeon_combios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+}
+
+static void radeon_legacy_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, true);
+	else
+		radeon_combios_output_lock(encoder, true);
+	radeon_legacy_lvds_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void radeon_legacy_lvds_commit(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	radeon_legacy_lvds_dpms(encoder, DRM_MODE_DPMS_ON);
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, false);
+	else
+		radeon_combios_output_lock(encoder, false);
+}
+
+static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
+					struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t lvds_pll_cntl, lvds_gen_cntl, lvds_ss_gen_cntl;
+
+	DRM_DEBUG("\n");
+
+	if (radeon_crtc->crtc_id == 0)
+		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
+
+	lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
+	lvds_pll_cntl &= ~RADEON_LVDS_PLL_EN;
+
+	lvds_ss_gen_cntl = RREG32(RADEON_LVDS_SS_GEN_CNTL);
+	if ((!rdev->is_atom_bios)) {
+		struct radeon_encoder_lvds *lvds = (struct radeon_encoder_lvds *)radeon_encoder->enc_priv;
+		if (lvds) {
+			DRM_DEBUG("bios LVDS_GEN_CNTL: 0x%x\n", lvds->lvds_gen_cntl);
+			lvds_gen_cntl = lvds->lvds_gen_cntl;
+			lvds_ss_gen_cntl &= ~((0xf << RADEON_LVDS_PWRSEQ_DELAY1_SHIFT) |
+					      (0xf << RADEON_LVDS_PWRSEQ_DELAY2_SHIFT));
+			lvds_ss_gen_cntl |= ((lvds->panel_digon_delay << RADEON_LVDS_PWRSEQ_DELAY1_SHIFT) |
+					     (lvds->panel_blon_delay << RADEON_LVDS_PWRSEQ_DELAY2_SHIFT));
+		} else
+			lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
+	} else
+		lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
+	lvds_gen_cntl |= RADEON_LVDS_DISPLAY_DIS;
+	lvds_gen_cntl &= ~(RADEON_LVDS_ON |
+			   RADEON_LVDS_BLON |
+			   RADEON_LVDS_EN |
+			   RADEON_LVDS_RST_FM);
+
+	if (ASIC_IS_R300(rdev))
+		lvds_pll_cntl &= ~(R300_LVDS_SRC_SEL_MASK);
+
+	if (radeon_crtc->crtc_id == 0) {
+		if (ASIC_IS_R300(rdev)) {
+			if (radeon_encoder->flags & RADEON_USE_RMX)
+				lvds_pll_cntl |= R300_LVDS_SRC_SEL_RMX;
+		} else
+			lvds_gen_cntl &= ~RADEON_LVDS_SEL_CRTC2;
+	} else {
+		if (ASIC_IS_R300(rdev))
+			lvds_pll_cntl |= R300_LVDS_SRC_SEL_CRTC2;
+		else
+			lvds_gen_cntl |= RADEON_LVDS_SEL_CRTC2;
+	}
+
+	WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+	WREG32(RADEON_LVDS_PLL_CNTL, lvds_pll_cntl);
+	WREG32(RADEON_LVDS_SS_GEN_CNTL, lvds_ss_gen_cntl);
+
+	if (rdev->family == CHIP_RV410)
+		WREG32(RADEON_CLOCK_CNTL_INDEX, 0);
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+	else
+		radeon_combios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+}
+
+static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder,
+					  struct drm_display_mode *mode,
+					  struct drm_display_mode *adjusted_mode)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	radeon_encoder->flags &= ~RADEON_USE_RMX;
+
+	if (radeon_encoder->rmx_type != RMX_OFF)
+		radeon_rmx_mode_fixup(encoder, mode, adjusted_mode);
+
+	return true;
+}
+
+static const struct drm_encoder_helper_funcs radeon_legacy_lvds_helper_funcs = {
+	.dpms = radeon_legacy_lvds_dpms,
+	.mode_fixup = radeon_legacy_lvds_mode_fixup,
+	.prepare = radeon_legacy_lvds_prepare,
+	.mode_set = radeon_legacy_lvds_mode_set,
+	.commit = radeon_legacy_lvds_commit,
+};
+
+
+static const struct drm_encoder_funcs radeon_legacy_lvds_enc_funcs = {
+	.destroy = radeon_enc_destroy,
+};
+
+static bool radeon_legacy_primary_dac_mode_fixup(struct drm_encoder *encoder,
+						 struct drm_display_mode *mode,
+						 struct drm_display_mode *adjusted_mode)
+{
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	return true;
+}
+
+static void radeon_legacy_primary_dac_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
+	uint32_t dac_cntl = RREG32(RADEON_DAC_CNTL);
+	uint32_t dac_macro_cntl = RREG32(RADEON_DAC_MACRO_CNTL);
+
+	DRM_DEBUG("\n");
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		crtc_ext_cntl |= RADEON_CRTC_CRT_ON;
+		dac_cntl &= ~RADEON_DAC_PDWN;
+		dac_macro_cntl &= ~(RADEON_DAC_PDWN_R |
+				    RADEON_DAC_PDWN_G |
+				    RADEON_DAC_PDWN_B);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		crtc_ext_cntl &= ~RADEON_CRTC_CRT_ON;
+		dac_cntl |= RADEON_DAC_PDWN;
+		dac_macro_cntl |= (RADEON_DAC_PDWN_R |
+				   RADEON_DAC_PDWN_G |
+				   RADEON_DAC_PDWN_B);
+		break;
+	}
+
+	WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
+	WREG32(RADEON_DAC_CNTL, dac_cntl);
+	WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl);
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+	else
+		radeon_combios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+}
+
+static void radeon_legacy_primary_dac_prepare(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, true);
+	else
+		radeon_combios_output_lock(encoder, true);
+	radeon_legacy_primary_dac_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void radeon_legacy_primary_dac_commit(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	radeon_legacy_primary_dac_dpms(encoder, DRM_MODE_DPMS_ON);
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, false);
+	else
+		radeon_combios_output_lock(encoder, false);
+}
+
+static void radeon_legacy_primary_dac_mode_set(struct drm_encoder *encoder,
+					       struct drm_display_mode *mode,
+					       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t disp_output_cntl, dac_cntl, dac2_cntl, dac_macro_cntl;
+
+	DRM_DEBUG("\n");
+
+	if (radeon_crtc->crtc_id == 0)
+		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
+
+	if (radeon_crtc->crtc_id == 0) {
+		if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) {
+			disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL) &
+				~(RADEON_DISP_DAC_SOURCE_MASK);
+			WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+		} else {
+			dac2_cntl = RREG32(RADEON_DAC_CNTL2)  & ~(RADEON_DAC2_DAC_CLK_SEL);
+			WREG32(RADEON_DAC_CNTL2, dac2_cntl);
+		}
+	} else {
+		if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) {
+			disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL) &
+				~(RADEON_DISP_DAC_SOURCE_MASK);
+			disp_output_cntl |= RADEON_DISP_DAC_SOURCE_CRTC2;
+			WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+		} else {
+			dac2_cntl = RREG32(RADEON_DAC_CNTL2) | RADEON_DAC2_DAC_CLK_SEL;
+			WREG32(RADEON_DAC_CNTL2, dac2_cntl);
+		}
+	}
+
+	dac_cntl = (RADEON_DAC_MASK_ALL |
+		    RADEON_DAC_VGA_ADR_EN |
+		    /* TODO 6-bits */
+		    RADEON_DAC_8BIT_EN);
+
+	WREG32_P(RADEON_DAC_CNTL,
+		       dac_cntl,
+		       RADEON_DAC_RANGE_CNTL |
+		       RADEON_DAC_BLANKING);
+
+	if (radeon_encoder->enc_priv) {
+		struct radeon_encoder_primary_dac *p_dac = (struct radeon_encoder_primary_dac *)radeon_encoder->enc_priv;
+		dac_macro_cntl = p_dac->ps2_pdac_adj;
+	} else
+		dac_macro_cntl = RREG32(RADEON_DAC_MACRO_CNTL);
+	dac_macro_cntl |= RADEON_DAC_PDWN_R | RADEON_DAC_PDWN_G | RADEON_DAC_PDWN_B;
+	WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl);
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+	else
+		radeon_combios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+}
+
+static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_encoder *encoder,
+								  struct drm_connector *connector)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t vclk_ecp_cntl, crtc_ext_cntl;
+	uint32_t dac_ext_cntl, dac_cntl, dac_macro_cntl, tmp;
+	enum drm_connector_status found = connector_status_disconnected;
+	bool color = true;
+
+	/* save the regs we need */
+	vclk_ecp_cntl = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
+	crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
+	dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL);
+	dac_cntl = RREG32(RADEON_DAC_CNTL);
+	dac_macro_cntl = RREG32(RADEON_DAC_MACRO_CNTL);
+
+	tmp = vclk_ecp_cntl &
+		~(RADEON_PIXCLK_ALWAYS_ONb | RADEON_PIXCLK_DAC_ALWAYS_ONb);
+	WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp);
+
+	tmp = crtc_ext_cntl | RADEON_CRTC_CRT_ON;
+	WREG32(RADEON_CRTC_EXT_CNTL, tmp);
+
+	tmp = RADEON_DAC_FORCE_BLANK_OFF_EN |
+		RADEON_DAC_FORCE_DATA_EN;
+
+	if (color)
+		tmp |= RADEON_DAC_FORCE_DATA_SEL_RGB;
+	else
+		tmp |= RADEON_DAC_FORCE_DATA_SEL_G;
+
+	if (ASIC_IS_R300(rdev))
+		tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT);
+	else
+		tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT);
+
+	WREG32(RADEON_DAC_EXT_CNTL, tmp);
+
+	tmp = dac_cntl & ~(RADEON_DAC_RANGE_CNTL_MASK | RADEON_DAC_PDWN);
+	tmp |= RADEON_DAC_RANGE_CNTL_PS2 | RADEON_DAC_CMP_EN;
+	WREG32(RADEON_DAC_CNTL, tmp);
+
+	tmp &= ~(RADEON_DAC_PDWN_R |
+		 RADEON_DAC_PDWN_G |
+		 RADEON_DAC_PDWN_B);
+
+	WREG32(RADEON_DAC_MACRO_CNTL, tmp);
+
+	udelay(2000);
+
+	if (RREG32(RADEON_DAC_CNTL) & RADEON_DAC_CMP_OUTPUT)
+		found = connector_status_connected;
+
+	/* restore the regs we used */
+	WREG32(RADEON_DAC_CNTL, dac_cntl);
+	WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl);
+	WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl);
+	WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
+	WREG32_PLL(RADEON_VCLK_ECP_CNTL, vclk_ecp_cntl);
+
+	return found;
+}
+
+static const struct drm_encoder_helper_funcs radeon_legacy_primary_dac_helper_funcs = {
+	.dpms = radeon_legacy_primary_dac_dpms,
+	.mode_fixup = radeon_legacy_primary_dac_mode_fixup,
+	.prepare = radeon_legacy_primary_dac_prepare,
+	.mode_set = radeon_legacy_primary_dac_mode_set,
+	.commit = radeon_legacy_primary_dac_commit,
+	.detect = radeon_legacy_primary_dac_detect,
+};
+
+
+static const struct drm_encoder_funcs radeon_legacy_primary_dac_enc_funcs = {
+	.destroy = radeon_enc_destroy,
+};
+
+static bool radeon_legacy_tmds_int_mode_fixup(struct drm_encoder *encoder,
+					      struct drm_display_mode *mode,
+					      struct drm_display_mode *adjusted_mode)
+{
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	return true;
+}
+
+static void radeon_legacy_tmds_int_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t fp_gen_cntl = RREG32(RADEON_FP_GEN_CNTL);
+	DRM_DEBUG("\n");
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		fp_gen_cntl |= (RADEON_FP_FPON | RADEON_FP_TMDS_EN);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		fp_gen_cntl &= ~(RADEON_FP_FPON | RADEON_FP_TMDS_EN);
+		break;
+	}
+
+	WREG32(RADEON_FP_GEN_CNTL, fp_gen_cntl);
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+	else
+		radeon_combios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+}
+
+static void radeon_legacy_tmds_int_prepare(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, true);
+	else
+		radeon_combios_output_lock(encoder, true);
+	radeon_legacy_tmds_int_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void radeon_legacy_tmds_int_commit(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	radeon_legacy_tmds_int_dpms(encoder, DRM_MODE_DPMS_ON);
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, true);
+	else
+		radeon_combios_output_lock(encoder, true);
+}
+
+static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder,
+					    struct drm_display_mode *mode,
+					    struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t tmp, tmds_pll_cntl, tmds_transmitter_cntl, fp_gen_cntl;
+	int i;
+
+	DRM_DEBUG("\n");
+
+	if (radeon_crtc->crtc_id == 0)
+		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
+
+	tmp = tmds_pll_cntl = RREG32(RADEON_TMDS_PLL_CNTL);
+	tmp &= 0xfffff;
+	if (rdev->family == CHIP_RV280) {
+		/* bit 22 of TMDS_PLL_CNTL is read-back inverted */
+		tmp ^= (1 << 22);
+		tmds_pll_cntl ^= (1 << 22);
+	}
+
+	if (radeon_encoder->enc_priv) {
+		struct radeon_encoder_int_tmds *tmds = (struct radeon_encoder_int_tmds *)radeon_encoder->enc_priv;
+
+		for (i = 0; i < 4; i++) {
+			if (tmds->tmds_pll[i].freq == 0)
+				break;
+			if ((uint32_t)(mode->clock / 10) < tmds->tmds_pll[i].freq) {
+				tmp = tmds->tmds_pll[i].value ;
+				break;
+			}
+		}
+	}
+
+	if (ASIC_IS_R300(rdev) || (rdev->family == CHIP_RV280)) {
+		if (tmp & 0xfff00000)
+			tmds_pll_cntl = tmp;
+		else {
+			tmds_pll_cntl &= 0xfff00000;
+			tmds_pll_cntl |= tmp;
+		}
+	} else
+		tmds_pll_cntl = tmp;
+
+	tmds_transmitter_cntl = RREG32(RADEON_TMDS_TRANSMITTER_CNTL) &
+		~(RADEON_TMDS_TRANSMITTER_PLLRST);
+
+    if (rdev->family == CHIP_R200 ||
+	rdev->family == CHIP_R100 ||
+	ASIC_IS_R300(rdev))
+	    tmds_transmitter_cntl &= ~(RADEON_TMDS_TRANSMITTER_PLLEN);
+    else /* RV chips got this bit reversed */
+	    tmds_transmitter_cntl |= RADEON_TMDS_TRANSMITTER_PLLEN;
+
+    fp_gen_cntl = (RREG32(RADEON_FP_GEN_CNTL) |
+		   (RADEON_FP_CRTC_DONT_SHADOW_VPAR |
+		    RADEON_FP_CRTC_DONT_SHADOW_HEND));
+
+    fp_gen_cntl &= ~(RADEON_FP_FPON | RADEON_FP_TMDS_EN);
+
+    if (1) /*  FIXME rgbBits == 8 */
+	    fp_gen_cntl |= RADEON_FP_PANEL_FORMAT;  /* 24 bit format */
+    else
+	    fp_gen_cntl &= ~RADEON_FP_PANEL_FORMAT;/* 18 bit format */
+
+    if (radeon_crtc->crtc_id == 0) {
+	    if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) {
+		    fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
+		    if (radeon_encoder->flags & RADEON_USE_RMX)
+			    fp_gen_cntl |= R200_FP_SOURCE_SEL_RMX;
+		    else
+			    fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1;
+	    } else
+		    fp_gen_cntl |= RADEON_FP_SEL_CRTC1;
+    } else {
+	    if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) {
+		    fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
+		    fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC2;
+	    } else
+		    fp_gen_cntl |= RADEON_FP_SEL_CRTC2;
+    }
+
+    WREG32(RADEON_TMDS_PLL_CNTL, tmds_pll_cntl);
+    WREG32(RADEON_TMDS_TRANSMITTER_CNTL, tmds_transmitter_cntl);
+    WREG32(RADEON_FP_GEN_CNTL, fp_gen_cntl);
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+	else
+		radeon_combios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+}
+
+static const struct drm_encoder_helper_funcs radeon_legacy_tmds_int_helper_funcs = {
+	.dpms = radeon_legacy_tmds_int_dpms,
+	.mode_fixup = radeon_legacy_tmds_int_mode_fixup,
+	.prepare = radeon_legacy_tmds_int_prepare,
+	.mode_set = radeon_legacy_tmds_int_mode_set,
+	.commit = radeon_legacy_tmds_int_commit,
+};
+
+
+static const struct drm_encoder_funcs radeon_legacy_tmds_int_enc_funcs = {
+	.destroy = radeon_enc_destroy,
+};
+
+static bool radeon_legacy_tmds_ext_mode_fixup(struct drm_encoder *encoder,
+					      struct drm_display_mode *mode,
+					      struct drm_display_mode *adjusted_mode)
+{
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	return true;
+}
+
+static void radeon_legacy_tmds_ext_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+	DRM_DEBUG("\n");
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		fp2_gen_cntl &= ~RADEON_FP2_BLANK_EN;
+		fp2_gen_cntl |= (RADEON_FP2_ON | RADEON_FP2_DVO_EN);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		fp2_gen_cntl |= RADEON_FP2_BLANK_EN;
+		fp2_gen_cntl &= ~(RADEON_FP2_ON | RADEON_FP2_DVO_EN);
+		break;
+	}
+
+	WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+	else
+		radeon_combios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+}
+
+static void radeon_legacy_tmds_ext_prepare(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, true);
+	else
+		radeon_combios_output_lock(encoder, true);
+	radeon_legacy_tmds_ext_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void radeon_legacy_tmds_ext_commit(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+	radeon_legacy_tmds_ext_dpms(encoder, DRM_MODE_DPMS_ON);
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, false);
+	else
+		radeon_combios_output_lock(encoder, false);
+}
+
+static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
+					    struct drm_display_mode *mode,
+					    struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t fp2_gen_cntl;
+
+	DRM_DEBUG("\n");
+
+	if (radeon_crtc->crtc_id == 0)
+		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
+
+	if (rdev->is_atom_bios) {
+		radeon_encoder->pixel_clock = adjusted_mode->clock;
+		atombios_external_tmds_setup(encoder, ATOM_ENABLE);
+		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+	} else {
+		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+
+		if (1) /*  FIXME rgbBits == 8 */
+			fp2_gen_cntl |= RADEON_FP2_PANEL_FORMAT; /* 24 bit format, */
+		else
+			fp2_gen_cntl &= ~RADEON_FP2_PANEL_FORMAT;/* 18 bit format, */
+
+		fp2_gen_cntl &= ~(RADEON_FP2_ON |
+				  RADEON_FP2_DVO_EN |
+				  RADEON_FP2_DVO_RATE_SEL_SDR);
+
+		/* XXX: these are oem specific */
+		if (ASIC_IS_R300(rdev)) {
+			if ((dev->pdev->device == 0x4850) &&
+			    (dev->pdev->subsystem_vendor == 0x1028) &&
+			    (dev->pdev->subsystem_device == 0x2001)) /* Dell Inspiron 8600 */
+				fp2_gen_cntl |= R300_FP2_DVO_CLOCK_MODE_SINGLE;
+			else
+				fp2_gen_cntl |= RADEON_FP2_PAD_FLOP_EN | R300_FP2_DVO_CLOCK_MODE_SINGLE;
+
+			/*if (mode->clock > 165000)
+			  fp2_gen_cntl |= R300_FP2_DVO_DUAL_CHANNEL_EN;*/
+		}
+	}
+
+	if (radeon_crtc->crtc_id == 0) {
+		if ((rdev->family == CHIP_R200) || ASIC_IS_R300(rdev)) {
+			fp2_gen_cntl &= ~R200_FP2_SOURCE_SEL_MASK;
+			if (radeon_encoder->flags & RADEON_USE_RMX)
+				fp2_gen_cntl |= R200_FP2_SOURCE_SEL_RMX;
+			else
+				fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC1;
+		} else
+			fp2_gen_cntl &= ~RADEON_FP2_SRC_SEL_CRTC2;
+	} else {
+		if ((rdev->family == CHIP_R200) || ASIC_IS_R300(rdev)) {
+			fp2_gen_cntl &= ~R200_FP2_SOURCE_SEL_MASK;
+			fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC2;
+		} else
+			fp2_gen_cntl |= RADEON_FP2_SRC_SEL_CRTC2;
+	}
+
+	WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+	else
+		radeon_combios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+}
+
+static const struct drm_encoder_helper_funcs radeon_legacy_tmds_ext_helper_funcs = {
+	.dpms = radeon_legacy_tmds_ext_dpms,
+	.mode_fixup = radeon_legacy_tmds_ext_mode_fixup,
+	.prepare = radeon_legacy_tmds_ext_prepare,
+	.mode_set = radeon_legacy_tmds_ext_mode_set,
+	.commit = radeon_legacy_tmds_ext_commit,
+};
+
+
+static const struct drm_encoder_funcs radeon_legacy_tmds_ext_enc_funcs = {
+	.destroy = radeon_enc_destroy,
+};
+
+static bool radeon_legacy_tv_dac_mode_fixup(struct drm_encoder *encoder,
+					    struct drm_display_mode *mode,
+					    struct drm_display_mode *adjusted_mode)
+{
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	return true;
+}
+
+static void radeon_legacy_tv_dac_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t fp2_gen_cntl = 0, crtc2_gen_cntl = 0, tv_dac_cntl = 0;
+	/* uint32_t tv_master_cntl = 0; */
+
+	DRM_DEBUG("\n");
+
+	if (rdev->family == CHIP_R200)
+		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+	else {
+		crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+		/*  FIXME TV */
+		/* tv_master_cntl = RREG32(RADEON_TV_MASTER_CNTL); */
+		tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
+	}
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		if (rdev->family == CHIP_R200) {
+			fp2_gen_cntl |= (RADEON_FP2_ON | RADEON_FP2_DVO_EN);
+		} else {
+			crtc2_gen_cntl |= RADEON_CRTC2_CRT2_ON;
+			/* tv_master_cntl |= RADEON_TV_ON; */
+			if (rdev->family == CHIP_R420 ||
+					rdev->family == CHIP_R423 ||
+					rdev->family == CHIP_RV410)
+				tv_dac_cntl &= ~(R420_TV_DAC_RDACPD |
+						R420_TV_DAC_GDACPD |
+						R420_TV_DAC_BDACPD |
+						RADEON_TV_DAC_BGSLEEP);
+			else
+				tv_dac_cntl &= ~(RADEON_TV_DAC_RDACPD |
+						RADEON_TV_DAC_GDACPD |
+						RADEON_TV_DAC_BDACPD |
+						RADEON_TV_DAC_BGSLEEP);
+		}
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		if (rdev->family == CHIP_R200)
+			fp2_gen_cntl &= ~(RADEON_FP2_ON | RADEON_FP2_DVO_EN);
+		else {
+			crtc2_gen_cntl &= ~RADEON_CRTC2_CRT2_ON;
+			/* tv_master_cntl &= ~RADEON_TV_ON; */
+			if (rdev->family == CHIP_R420 ||
+					rdev->family == CHIP_R423 ||
+					rdev->family == CHIP_RV410)
+				tv_dac_cntl |= (R420_TV_DAC_RDACPD |
+						R420_TV_DAC_GDACPD |
+						R420_TV_DAC_BDACPD |
+						RADEON_TV_DAC_BGSLEEP);
+			else
+				tv_dac_cntl |= (RADEON_TV_DAC_RDACPD |
+						RADEON_TV_DAC_GDACPD |
+						RADEON_TV_DAC_BDACPD |
+						RADEON_TV_DAC_BGSLEEP);
+		}
+		break;
+	}
+
+	if (rdev->family == CHIP_R200) {
+		WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
+	} else {
+		WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+		/* WREG32(RADEON_TV_MASTER_CNTL, tv_master_cntl); */
+		WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
+	}
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+	else
+		radeon_combios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
+}
+
+static void radeon_legacy_tv_dac_prepare(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, true);
+	else
+		radeon_combios_output_lock(encoder, true);
+	radeon_legacy_tv_dac_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void radeon_legacy_tv_dac_commit(struct drm_encoder *encoder)
+{
+	struct radeon_device *rdev = encoder->dev->dev_private;
+
+	radeon_legacy_tv_dac_dpms(encoder, DRM_MODE_DPMS_ON);
+
+	if (rdev->is_atom_bios)
+		radeon_atom_output_lock(encoder, true);
+	else
+		radeon_combios_output_lock(encoder, true);
+}
+
+static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
+		struct drm_display_mode *mode,
+		struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	uint32_t tv_dac_cntl, gpiopad_a = 0, dac2_cntl, disp_output_cntl = 0;
+	uint32_t disp_hw_debug = 0, fp2_gen_cntl = 0;
+
+	DRM_DEBUG("\n");
+
+	if (radeon_crtc->crtc_id == 0)
+		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
+
+	if (rdev->family != CHIP_R200) {
+		tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
+		if (rdev->family == CHIP_R420 ||
+				rdev->family == CHIP_R423 ||
+				rdev->family == CHIP_RV410) {
+			tv_dac_cntl &= ~(RADEON_TV_DAC_STD_MASK |
+					RADEON_TV_DAC_BGADJ_MASK |
+					R420_TV_DAC_DACADJ_MASK |
+					R420_TV_DAC_RDACPD |
+					R420_TV_DAC_GDACPD |
+					R420_TV_DAC_GDACPD |
+					R420_TV_DAC_TVENABLE);
+		} else {
+			tv_dac_cntl &= ~(RADEON_TV_DAC_STD_MASK |
+					RADEON_TV_DAC_BGADJ_MASK |
+					RADEON_TV_DAC_DACADJ_MASK |
+					RADEON_TV_DAC_RDACPD |
+					RADEON_TV_DAC_GDACPD |
+					RADEON_TV_DAC_GDACPD);
+		}
+
+		/*  FIXME TV */
+		if (radeon_encoder->enc_priv) {
+			struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
+			tv_dac_cntl |= (RADEON_TV_DAC_NBLANK |
+					RADEON_TV_DAC_NHOLD |
+					RADEON_TV_DAC_STD_PS2 |
+					tv_dac->ps2_tvdac_adj);
+		} else
+			tv_dac_cntl |= (RADEON_TV_DAC_NBLANK |
+					RADEON_TV_DAC_NHOLD |
+					RADEON_TV_DAC_STD_PS2);
+
+		WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
+	}
+
+	if (ASIC_IS_R300(rdev)) {
+		gpiopad_a = RREG32(RADEON_GPIOPAD_A) | 1;
+		disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
+	} else if (rdev->family == CHIP_R200)
+		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+	else
+		disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
+
+	dac2_cntl = RREG32(RADEON_DAC_CNTL2) | RADEON_DAC2_DAC2_CLK_SEL;
+
+	if (radeon_crtc->crtc_id == 0) {
+		if (ASIC_IS_R300(rdev)) {
+			disp_output_cntl &= ~RADEON_DISP_TVDAC_SOURCE_MASK;
+			disp_output_cntl |= RADEON_DISP_TVDAC_SOURCE_CRTC;
+		} else if (rdev->family == CHIP_R200) {
+			fp2_gen_cntl &= ~(R200_FP2_SOURCE_SEL_MASK |
+					  RADEON_FP2_DVO_RATE_SEL_SDR);
+		} else
+			disp_hw_debug |= RADEON_CRT2_DISP1_SEL;
+	} else {
+		if (ASIC_IS_R300(rdev)) {
+			disp_output_cntl &= ~RADEON_DISP_TVDAC_SOURCE_MASK;
+			disp_output_cntl |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
+		} else if (rdev->family == CHIP_R200) {
+			fp2_gen_cntl &= ~(R200_FP2_SOURCE_SEL_MASK |
+					  RADEON_FP2_DVO_RATE_SEL_SDR);
+			fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC2;
+		} else
+			disp_hw_debug &= ~RADEON_CRT2_DISP1_SEL;
+	}
+
+	WREG32(RADEON_DAC_CNTL2, dac2_cntl);
+
+	if (ASIC_IS_R300(rdev)) {
+		WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
+		WREG32(RADEON_DISP_TV_OUT_CNTL, disp_output_cntl);
+	} else if (rdev->family == CHIP_R200)
+		WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
+	else
+		WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+
+	if (rdev->is_atom_bios)
+		radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+	else
+		radeon_combios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
+
+}
+
+static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder *encoder,
+							     struct drm_connector *connector)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
+	uint32_t disp_hw_debug, disp_output_cntl, gpiopad_a, pixclks_cntl, tmp;
+	enum drm_connector_status found = connector_status_disconnected;
+	bool color = true;
+
+	/*  FIXME tv */
+
+	/* save the regs we need */
+	pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL);
+	gpiopad_a = ASIC_IS_R300(rdev) ? RREG32(RADEON_GPIOPAD_A) : 0;
+	disp_output_cntl = ASIC_IS_R300(rdev) ? RREG32(RADEON_DISP_OUTPUT_CNTL) : 0;
+	disp_hw_debug = ASIC_IS_R300(rdev) ? 0 : RREG32(RADEON_DISP_HW_DEBUG);
+	crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+	tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
+	dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL);
+	dac_cntl2 = RREG32(RADEON_DAC_CNTL2);
+
+	tmp = pixclks_cntl & ~(RADEON_PIX2CLK_ALWAYS_ONb
+			       | RADEON_PIX2CLK_DAC_ALWAYS_ONb);
+	WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
+
+	if (ASIC_IS_R300(rdev))
+		WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
+
+	tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
+	tmp |= RADEON_CRTC2_CRT2_ON |
+		(2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
+
+	WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
+
+	if (ASIC_IS_R300(rdev)) {
+		tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
+		tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
+		WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
+	} else {
+		tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
+		WREG32(RADEON_DISP_HW_DEBUG, tmp);
+	}
+
+	tmp = RADEON_TV_DAC_NBLANK |
+		RADEON_TV_DAC_NHOLD |
+		RADEON_TV_MONITOR_DETECT_EN |
+		RADEON_TV_DAC_STD_PS2;
+
+	WREG32(RADEON_TV_DAC_CNTL, tmp);
+
+	tmp = RADEON_DAC2_FORCE_BLANK_OFF_EN |
+		RADEON_DAC2_FORCE_DATA_EN;
+
+	if (color)
+		tmp |= RADEON_DAC_FORCE_DATA_SEL_RGB;
+	else
+		tmp |= RADEON_DAC_FORCE_DATA_SEL_G;
+
+	if (ASIC_IS_R300(rdev))
+		tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT);
+	else
+		tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT);
+
+	WREG32(RADEON_DAC_EXT_CNTL, tmp);
+
+	tmp = dac_cntl2 | RADEON_DAC2_DAC2_CLK_SEL | RADEON_DAC2_CMP_EN;
+	WREG32(RADEON_DAC_CNTL2, tmp);
+
+	udelay(10000);
+
+	if (ASIC_IS_R300(rdev)) {
+		if (RREG32(RADEON_DAC_CNTL2) & RADEON_DAC2_CMP_OUT_B)
+			found = connector_status_connected;
+	} else {
+		if (RREG32(RADEON_DAC_CNTL2) & RADEON_DAC2_CMP_OUTPUT)
+			found = connector_status_connected;
+	}
+
+	/* restore regs we used */
+	WREG32(RADEON_DAC_CNTL2, dac_cntl2);
+	WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl);
+	WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
+	WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+
+	if (ASIC_IS_R300(rdev)) {
+		WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+		WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
+	} else {
+		WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+	}
+	WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
+
+	/* return found; */
+	return connector_status_disconnected;
+
+}
+
+static const struct drm_encoder_helper_funcs radeon_legacy_tv_dac_helper_funcs = {
+	.dpms = radeon_legacy_tv_dac_dpms,
+	.mode_fixup = radeon_legacy_tv_dac_mode_fixup,
+	.prepare = radeon_legacy_tv_dac_prepare,
+	.mode_set = radeon_legacy_tv_dac_mode_set,
+	.commit = radeon_legacy_tv_dac_commit,
+	.detect = radeon_legacy_tv_dac_detect,
+};
+
+
+static const struct drm_encoder_funcs radeon_legacy_tv_dac_enc_funcs = {
+	.destroy = radeon_enc_destroy,
+};
+
+void
+radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t supported_device)
+{
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_encoder *encoder;
+	struct radeon_encoder *radeon_encoder;
+
+	/* see if we already added it */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		radeon_encoder = to_radeon_encoder(encoder);
+		if (radeon_encoder->encoder_id == encoder_id) {
+			radeon_encoder->devices |= supported_device;
+			return;
+		}
+
+	}
+
+	/* add a new one */
+	radeon_encoder = kzalloc(sizeof(struct radeon_encoder), GFP_KERNEL);
+	if (!radeon_encoder)
+		return;
+
+	encoder = &radeon_encoder->base;
+	encoder->possible_crtcs = 0x3;
+	encoder->possible_clones = 0;
+
+	radeon_encoder->enc_priv = NULL;
+
+	radeon_encoder->encoder_id = encoder_id;
+	radeon_encoder->devices = supported_device;
+
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+		drm_encoder_init(dev, encoder, &radeon_legacy_lvds_enc_funcs, DRM_MODE_ENCODER_LVDS);
+		drm_encoder_helper_add(encoder, &radeon_legacy_lvds_helper_funcs);
+		if (rdev->is_atom_bios)
+			radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+		else
+			radeon_encoder->enc_priv = radeon_combios_get_lvds_info(radeon_encoder);
+		radeon_encoder->rmx_type = RMX_FULL;
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+		drm_encoder_init(dev, encoder, &radeon_legacy_tmds_int_enc_funcs, DRM_MODE_ENCODER_TMDS);
+		drm_encoder_helper_add(encoder, &radeon_legacy_tmds_int_helper_funcs);
+		if (rdev->is_atom_bios)
+			radeon_encoder->enc_priv = radeon_atombios_get_tmds_info(radeon_encoder);
+		else
+			radeon_encoder->enc_priv = radeon_combios_get_tmds_info(radeon_encoder);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
+		drm_encoder_init(dev, encoder, &radeon_legacy_primary_dac_enc_funcs, DRM_MODE_ENCODER_DAC);
+		drm_encoder_helper_add(encoder, &radeon_legacy_primary_dac_helper_funcs);
+		if (rdev->is_atom_bios)
+			radeon_encoder->enc_priv = radeon_atombios_get_primary_dac_info(radeon_encoder);
+		else
+			radeon_encoder->enc_priv = radeon_combios_get_primary_dac_info(radeon_encoder);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DAC2:
+		drm_encoder_init(dev, encoder, &radeon_legacy_tv_dac_enc_funcs, DRM_MODE_ENCODER_TVDAC);
+		drm_encoder_helper_add(encoder, &radeon_legacy_tv_dac_helper_funcs);
+		if (rdev->is_atom_bios)
+			radeon_encoder->enc_priv = radeon_atombios_get_tv_dac_info(radeon_encoder);
+		else
+			radeon_encoder->enc_priv = radeon_combios_get_tv_dac_info(radeon_encoder);
+		break;
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+		drm_encoder_init(dev, encoder, &radeon_legacy_tmds_ext_enc_funcs, DRM_MODE_ENCODER_TMDS);
+		drm_encoder_helper_add(encoder, &radeon_legacy_tmds_ext_helper_funcs);
+		if (!rdev->is_atom_bios)
+			radeon_combios_get_ext_tmds_info(radeon_encoder);
+		break;
+	}
+}
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
new file mode 100644
index 00000000000..9173b687462
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -0,0 +1,398 @@
+/*
+ * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and
+ *                VA Linux Systems Inc., Fremont, California.
+ * Copyright 2008 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Original Authors:
+ *   Kevin E. Martin, Rickard E. Faith, Alan Hourihane
+ *
+ * Kernel port Author: Dave Airlie
+ */
+
+#ifndef RADEON_MODE_H
+#define RADEON_MODE_H
+
+#include <drm_crtc.h>
+#include <drm_mode.h>
+#include <drm_edid.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/i2c-algo-bit.h>
+
+#define to_radeon_crtc(x) container_of(x, struct radeon_crtc, base)
+#define to_radeon_connector(x) container_of(x, struct radeon_connector, base)
+#define to_radeon_encoder(x) container_of(x, struct radeon_encoder, base)
+#define to_radeon_framebuffer(x) container_of(x, struct radeon_framebuffer, base)
+
+enum radeon_connector_type {
+	CONNECTOR_NONE,
+	CONNECTOR_VGA,
+	CONNECTOR_DVI_I,
+	CONNECTOR_DVI_D,
+	CONNECTOR_DVI_A,
+	CONNECTOR_STV,
+	CONNECTOR_CTV,
+	CONNECTOR_LVDS,
+	CONNECTOR_DIGITAL,
+	CONNECTOR_SCART,
+	CONNECTOR_HDMI_TYPE_A,
+	CONNECTOR_HDMI_TYPE_B,
+	CONNECTOR_0XC,
+	CONNECTOR_0XD,
+	CONNECTOR_DIN,
+	CONNECTOR_DISPLAY_PORT,
+	CONNECTOR_UNSUPPORTED
+};
+
+enum radeon_dvi_type {
+	DVI_AUTO,
+	DVI_DIGITAL,
+	DVI_ANALOG
+};
+
+enum radeon_rmx_type {
+	RMX_OFF,
+	RMX_FULL,
+	RMX_CENTER,
+	RMX_ASPECT
+};
+
+enum radeon_tv_std {
+	TV_STD_NTSC,
+	TV_STD_PAL,
+	TV_STD_PAL_M,
+	TV_STD_PAL_60,
+	TV_STD_NTSC_J,
+	TV_STD_SCART_PAL,
+	TV_STD_SECAM,
+	TV_STD_PAL_CN,
+};
+
+struct radeon_i2c_bus_rec {
+	bool valid;
+	uint32_t mask_clk_reg;
+	uint32_t mask_data_reg;
+	uint32_t a_clk_reg;
+	uint32_t a_data_reg;
+	uint32_t put_clk_reg;
+	uint32_t put_data_reg;
+	uint32_t get_clk_reg;
+	uint32_t get_data_reg;
+	uint32_t mask_clk_mask;
+	uint32_t mask_data_mask;
+	uint32_t put_clk_mask;
+	uint32_t put_data_mask;
+	uint32_t get_clk_mask;
+	uint32_t get_data_mask;
+	uint32_t a_clk_mask;
+	uint32_t a_data_mask;
+};
+
+struct radeon_tmds_pll {
+    uint32_t freq;
+    uint32_t value;
+};
+
+#define RADEON_MAX_BIOS_CONNECTOR 16
+
+#define RADEON_PLL_USE_BIOS_DIVS        (1 << 0)
+#define RADEON_PLL_NO_ODD_POST_DIV      (1 << 1)
+#define RADEON_PLL_USE_REF_DIV          (1 << 2)
+#define RADEON_PLL_LEGACY               (1 << 3)
+#define RADEON_PLL_PREFER_LOW_REF_DIV   (1 << 4)
+#define RADEON_PLL_PREFER_HIGH_REF_DIV  (1 << 5)
+#define RADEON_PLL_PREFER_LOW_FB_DIV    (1 << 6)
+#define RADEON_PLL_PREFER_HIGH_FB_DIV   (1 << 7)
+#define RADEON_PLL_PREFER_LOW_POST_DIV  (1 << 8)
+#define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
+#define RADEON_PLL_USE_FRAC_FB_DIV      (1 << 10)
+
+struct radeon_pll {
+	uint16_t reference_freq;
+	uint16_t reference_div;
+	uint32_t pll_in_min;
+	uint32_t pll_in_max;
+	uint32_t pll_out_min;
+	uint32_t pll_out_max;
+	uint16_t xclk;
+
+	uint32_t min_ref_div;
+	uint32_t max_ref_div;
+	uint32_t min_post_div;
+	uint32_t max_post_div;
+	uint32_t min_feedback_div;
+	uint32_t max_feedback_div;
+	uint32_t min_frac_feedback_div;
+	uint32_t max_frac_feedback_div;
+	uint32_t best_vco;
+};
+
+struct radeon_i2c_chan {
+	struct drm_device *dev;
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo;
+	struct radeon_i2c_bus_rec rec;
+};
+
+/* mostly for macs, but really any system without connector tables */
+enum radeon_connector_table {
+	CT_NONE,
+	CT_GENERIC,
+	CT_IBOOK,
+	CT_POWERBOOK_EXTERNAL,
+	CT_POWERBOOK_INTERNAL,
+	CT_POWERBOOK_VGA,
+	CT_MINI_EXTERNAL,
+	CT_MINI_INTERNAL,
+	CT_IMAC_G5_ISIGHT,
+	CT_EMAC,
+};
+
+struct radeon_mode_info {
+	struct atom_context *atom_context;
+	enum radeon_connector_table connector_table;
+	bool mode_config_initialized;
+};
+
+struct radeon_crtc {
+	struct drm_crtc base;
+	int crtc_id;
+	u16 lut_r[256], lut_g[256], lut_b[256];
+	bool enabled;
+	bool can_tile;
+	uint32_t crtc_offset;
+	struct radeon_framebuffer *fbdev_fb;
+	struct drm_mode_set mode_set;
+	struct drm_gem_object *cursor_bo;
+	uint64_t cursor_addr;
+	int cursor_width;
+	int cursor_height;
+};
+
+#define RADEON_USE_RMX 1
+
+struct radeon_native_mode {
+	/* preferred mode */
+	uint32_t panel_xres, panel_yres;
+	uint32_t hoverplus, hsync_width;
+	uint32_t hblank;
+	uint32_t voverplus, vsync_width;
+	uint32_t vblank;
+	uint32_t dotclock;
+	uint32_t flags;
+};
+
+struct radeon_encoder_primary_dac {
+	/* legacy primary dac */
+	uint32_t ps2_pdac_adj;
+};
+
+struct radeon_encoder_lvds {
+	/* legacy lvds */
+	uint16_t panel_vcc_delay;
+	uint8_t  panel_pwr_delay;
+	uint8_t  panel_digon_delay;
+	uint8_t  panel_blon_delay;
+	uint16_t panel_ref_divider;
+	uint8_t  panel_post_divider;
+	uint16_t panel_fb_divider;
+	bool     use_bios_dividers;
+	uint32_t lvds_gen_cntl;
+	/* panel mode */
+	struct radeon_native_mode native_mode;
+};
+
+struct radeon_encoder_tv_dac {
+	/* legacy tv dac */
+	uint32_t ps2_tvdac_adj;
+	uint32_t ntsc_tvdac_adj;
+	uint32_t pal_tvdac_adj;
+
+	enum radeon_tv_std tv_std;
+};
+
+struct radeon_encoder_int_tmds {
+	/* legacy int tmds */
+	struct radeon_tmds_pll tmds_pll[4];
+};
+
+struct radeon_encoder_atom_dig {
+	/* atom dig */
+	bool coherent_mode;
+	int dig_block;
+	/* atom lvds */
+	uint32_t lvds_misc;
+	uint16_t panel_pwr_delay;
+	/* panel mode */
+	struct radeon_native_mode native_mode;
+};
+
+struct radeon_encoder {
+	struct drm_encoder base;
+	uint32_t encoder_id;
+	uint32_t devices;
+	uint32_t flags;
+	uint32_t pixel_clock;
+	enum radeon_rmx_type rmx_type;
+	struct radeon_native_mode native_mode;
+	void *enc_priv;
+};
+
+struct radeon_connector_atom_dig {
+	uint32_t igp_lane_info;
+	bool linkb;
+};
+
+struct radeon_connector {
+	struct drm_connector base;
+	uint32_t connector_id;
+	uint32_t devices;
+	struct radeon_i2c_chan *ddc_bus;
+	int use_digital;
+	void *con_priv;
+};
+
+struct radeon_framebuffer {
+	struct drm_framebuffer base;
+	struct drm_gem_object *obj;
+};
+
+extern struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
+						 struct radeon_i2c_bus_rec *rec,
+						 const char *name);
+extern void radeon_i2c_destroy(struct radeon_i2c_chan *i2c);
+extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
+extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
+
+extern struct drm_encoder *radeon_best_encoder(struct drm_connector *connector);
+
+extern void radeon_compute_pll(struct radeon_pll *pll,
+			       uint64_t freq,
+			       uint32_t *dot_clock_p,
+			       uint32_t *fb_div_p,
+			       uint32_t *frac_fb_div_p,
+			       uint32_t *ref_div_p,
+			       uint32_t *post_div_p,
+			       int flags);
+
+struct drm_encoder *radeon_encoder_legacy_lvds_add(struct drm_device *dev, int bios_index);
+struct drm_encoder *radeon_encoder_legacy_primary_dac_add(struct drm_device *dev, int bios_index, int with_tv);
+struct drm_encoder *radeon_encoder_legacy_tv_dac_add(struct drm_device *dev, int bios_index, int with_tv);
+struct drm_encoder *radeon_encoder_legacy_tmds_int_add(struct drm_device *dev, int bios_index);
+struct drm_encoder *radeon_encoder_legacy_tmds_ext_add(struct drm_device *dev, int bios_index);
+extern void atombios_external_tmds_setup(struct drm_encoder *encoder, int action);
+extern int atombios_get_encoder_mode(struct drm_encoder *encoder);
+
+extern void radeon_crtc_load_lut(struct drm_crtc *crtc);
+extern int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+				   struct drm_framebuffer *old_fb);
+extern int atombios_crtc_mode_set(struct drm_crtc *crtc,
+				   struct drm_display_mode *mode,
+				   struct drm_display_mode *adjusted_mode,
+				   int x, int y,
+				   struct drm_framebuffer *old_fb);
+extern void atombios_crtc_dpms(struct drm_crtc *crtc, int mode);
+
+extern int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+				 struct drm_framebuffer *old_fb);
+extern void radeon_legacy_atom_set_surface(struct drm_crtc *crtc);
+
+extern int radeon_crtc_cursor_set(struct drm_crtc *crtc,
+				  struct drm_file *file_priv,
+				  uint32_t handle,
+				  uint32_t width,
+				  uint32_t height);
+extern int radeon_crtc_cursor_move(struct drm_crtc *crtc,
+				   int x, int y);
+
+extern bool radeon_atom_get_clock_info(struct drm_device *dev);
+extern bool radeon_combios_get_clock_info(struct drm_device *dev);
+extern struct radeon_encoder_atom_dig *
+radeon_atombios_get_lvds_info(struct radeon_encoder *encoder);
+extern struct radeon_encoder_int_tmds *
+radeon_atombios_get_tmds_info(struct radeon_encoder *encoder);
+extern struct radeon_encoder_primary_dac *
+radeon_atombios_get_primary_dac_info(struct radeon_encoder *encoder);
+extern struct radeon_encoder_tv_dac *
+radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder);
+extern struct radeon_encoder_lvds *
+radeon_combios_get_lvds_info(struct radeon_encoder *encoder);
+extern struct radeon_encoder_int_tmds *
+radeon_combios_get_tmds_info(struct radeon_encoder *encoder);
+extern void radeon_combios_get_ext_tmds_info(struct radeon_encoder *encoder);
+extern struct radeon_encoder_tv_dac *
+radeon_combios_get_tv_dac_info(struct radeon_encoder *encoder);
+extern struct radeon_encoder_primary_dac *
+radeon_combios_get_primary_dac_info(struct radeon_encoder *encoder);
+extern void radeon_combios_output_lock(struct drm_encoder *encoder, bool lock);
+extern void radeon_combios_initialize_bios_scratch_regs(struct drm_device *dev);
+extern void radeon_atom_output_lock(struct drm_encoder *encoder, bool lock);
+extern void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev);
+extern void
+radeon_atombios_encoder_crtc_scratch_regs(struct drm_encoder *encoder, int crtc);
+extern void
+radeon_atombios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on);
+extern void
+radeon_combios_encoder_crtc_scratch_regs(struct drm_encoder *encoder, int crtc);
+extern void
+radeon_combios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on);
+extern void radeon_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+				     u16 blue, int regno);
+struct drm_framebuffer *radeon_framebuffer_create(struct drm_device *dev,
+						  struct drm_mode_fb_cmd *mode_cmd,
+						  struct drm_gem_object *obj);
+
+int radeonfb_probe(struct drm_device *dev);
+
+int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb);
+bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev);
+bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev);
+void radeon_atombios_init_crtc(struct drm_device *dev,
+			       struct radeon_crtc *radeon_crtc);
+void radeon_legacy_init_crtc(struct drm_device *dev,
+			     struct radeon_crtc *radeon_crtc);
+void radeon_i2c_do_lock(struct radeon_connector *radeon_connector, int lock_state);
+
+void radeon_get_clock_info(struct drm_device *dev);
+
+extern bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev);
+extern bool radeon_get_atom_connector_info_from_supported_devices_table(struct drm_device *dev);
+
+void radeon_rmx_mode_fixup(struct drm_encoder *encoder,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+void radeon_enc_destroy(struct drm_encoder *encoder);
+void radeon_copy_fb(struct drm_device *dev, struct drm_gem_object *dst_obj);
+void radeon_combios_asic_init(struct drm_device *dev);
+extern int radeon_static_clocks_init(struct drm_device *dev);
+void radeon_init_disp_bw_legacy(struct drm_device *dev,
+				struct drm_display_mode *mode1,
+				uint32_t pixel_bytes1,
+				struct drm_display_mode *mode2,
+				uint32_t pixel_bytes2);
+void radeon_init_disp_bw_avivo(struct drm_device *dev,
+			       struct drm_display_mode *mode1,
+			       uint32_t pixel_bytes1,
+			       struct drm_display_mode *mode2,
+			       uint32_t pixel_bytes2);
+void radeon_init_disp_bandwidth(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
new file mode 100644
index 00000000000..983e8df5e00
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -0,0 +1,511 @@
+/*
+ * Copyright 2009 Jerome Glisse.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ */
+/*
+ * Authors:
+ *    Jerome Glisse <glisse@freedesktop.org>
+ *    Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ *    Dave Airlie
+ */
+#include <linux/list.h>
+#include <drm/drmP.h>
+#include "radeon_drm.h"
+#include "radeon.h"
+
+struct radeon_object {
+	struct ttm_buffer_object	tobj;
+	struct list_head		list;
+	struct radeon_device		*rdev;
+	struct drm_gem_object		*gobj;
+	struct ttm_bo_kmap_obj		kmap;
+	unsigned			pin_count;
+	uint64_t			gpu_addr;
+	void				*kptr;
+	bool				is_iomem;
+};
+
+int radeon_ttm_init(struct radeon_device *rdev);
+void radeon_ttm_fini(struct radeon_device *rdev);
+
+/*
+ * To exclude mutual BO access we rely on bo_reserve exclusion, as all
+ * function are calling it.
+ */
+
+static int radeon_object_reserve(struct radeon_object *robj, bool interruptible)
+{
+	return ttm_bo_reserve(&robj->tobj, interruptible, false, false, 0);
+}
+
+static void radeon_object_unreserve(struct radeon_object *robj)
+{
+	ttm_bo_unreserve(&robj->tobj);
+}
+
+static void radeon_ttm_object_object_destroy(struct ttm_buffer_object *tobj)
+{
+	struct radeon_object *robj;
+
+	robj = container_of(tobj, struct radeon_object, tobj);
+	list_del_init(&robj->list);
+	kfree(robj);
+}
+
+static inline void radeon_object_gpu_addr(struct radeon_object *robj)
+{
+	/* Default gpu address */
+	robj->gpu_addr = 0xFFFFFFFFFFFFFFFFULL;
+	if (robj->tobj.mem.mm_node == NULL) {
+		return;
+	}
+	robj->gpu_addr = ((u64)robj->tobj.mem.mm_node->start) << PAGE_SHIFT;
+	switch (robj->tobj.mem.mem_type) {
+	case TTM_PL_VRAM:
+		robj->gpu_addr += (u64)robj->rdev->mc.vram_location;
+		break;
+	case TTM_PL_TT:
+		robj->gpu_addr += (u64)robj->rdev->mc.gtt_location;
+		break;
+	default:
+		DRM_ERROR("Unknown placement %d\n", robj->tobj.mem.mem_type);
+		robj->gpu_addr = 0xFFFFFFFFFFFFFFFFULL;
+		return;
+	}
+}
+
+static inline uint32_t radeon_object_flags_from_domain(uint32_t domain)
+{
+	uint32_t flags = 0;
+	if (domain & RADEON_GEM_DOMAIN_VRAM) {
+		flags |= TTM_PL_FLAG_VRAM;
+	}
+	if (domain & RADEON_GEM_DOMAIN_GTT) {
+		flags |= TTM_PL_FLAG_TT;
+	}
+	if (domain & RADEON_GEM_DOMAIN_CPU) {
+		flags |= TTM_PL_FLAG_SYSTEM;
+	}
+	if (!flags) {
+		flags |= TTM_PL_FLAG_SYSTEM;
+	}
+	return flags;
+}
+
+int radeon_object_create(struct radeon_device *rdev,
+			 struct drm_gem_object *gobj,
+			 unsigned long size,
+			 bool kernel,
+			 uint32_t domain,
+			 bool interruptible,
+			 struct radeon_object **robj_ptr)
+{
+	struct radeon_object *robj;
+	enum ttm_bo_type type;
+	uint32_t flags;
+	int r;
+
+	if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
+		rdev->mman.bdev.dev_mapping = rdev->ddev->dev_mapping;
+	}
+	if (kernel) {
+		type = ttm_bo_type_kernel;
+	} else {
+		type = ttm_bo_type_device;
+	}
+	*robj_ptr = NULL;
+	robj = kzalloc(sizeof(struct radeon_object), GFP_KERNEL);
+	if (robj == NULL) {
+		return -ENOMEM;
+	}
+	robj->rdev = rdev;
+	robj->gobj = gobj;
+	INIT_LIST_HEAD(&robj->list);
+
+	flags = radeon_object_flags_from_domain(domain);
+	r = ttm_buffer_object_init(&rdev->mman.bdev, &robj->tobj, size, type, flags,
+				   0, 0, false, NULL, size,
+				   &radeon_ttm_object_object_destroy);
+	if (unlikely(r != 0)) {
+		/* ttm call radeon_ttm_object_object_destroy if error happen */
+		DRM_ERROR("Failed to allocate TTM object (%ld, 0x%08X, %u)\n",
+			  size, flags, 0);
+		return r;
+	}
+	*robj_ptr = robj;
+	if (gobj) {
+		list_add_tail(&robj->list, &rdev->gem.objects);
+	}
+	return 0;
+}
+
+int radeon_object_kmap(struct radeon_object *robj, void **ptr)
+{
+	int r;
+
+	spin_lock(&robj->tobj.lock);
+	if (robj->kptr) {
+		if (ptr) {
+			*ptr = robj->kptr;
+		}
+		spin_unlock(&robj->tobj.lock);
+		return 0;
+	}
+	spin_unlock(&robj->tobj.lock);
+	r = ttm_bo_kmap(&robj->tobj, 0, robj->tobj.num_pages, &robj->kmap);
+	if (r) {
+		return r;
+	}
+	spin_lock(&robj->tobj.lock);
+	robj->kptr = ttm_kmap_obj_virtual(&robj->kmap, &robj->is_iomem);
+	spin_unlock(&robj->tobj.lock);
+	if (ptr) {
+		*ptr = robj->kptr;
+	}
+	return 0;
+}
+
+void radeon_object_kunmap(struct radeon_object *robj)
+{
+	spin_lock(&robj->tobj.lock);
+	if (robj->kptr == NULL) {
+		spin_unlock(&robj->tobj.lock);
+		return;
+	}
+	robj->kptr = NULL;
+	spin_unlock(&robj->tobj.lock);
+	ttm_bo_kunmap(&robj->kmap);
+}
+
+void radeon_object_unref(struct radeon_object **robj)
+{
+	struct ttm_buffer_object *tobj;
+
+	if ((*robj) == NULL) {
+		return;
+	}
+	tobj = &((*robj)->tobj);
+	ttm_bo_unref(&tobj);
+	if (tobj == NULL) {
+		*robj = NULL;
+	}
+}
+
+int radeon_object_mmap(struct radeon_object *robj, uint64_t *offset)
+{
+	*offset = robj->tobj.addr_space_offset;
+	return 0;
+}
+
+int radeon_object_pin(struct radeon_object *robj, uint32_t domain,
+		      uint64_t *gpu_addr)
+{
+	uint32_t flags;
+	uint32_t tmp;
+	void *fbptr;
+	int r;
+
+	flags = radeon_object_flags_from_domain(domain);
+	spin_lock(&robj->tobj.lock);
+	if (robj->pin_count) {
+		robj->pin_count++;
+		if (gpu_addr != NULL) {
+			*gpu_addr = robj->gpu_addr;
+		}
+		spin_unlock(&robj->tobj.lock);
+		return 0;
+	}
+	spin_unlock(&robj->tobj.lock);
+	r = radeon_object_reserve(robj, false);
+	if (unlikely(r != 0)) {
+		DRM_ERROR("radeon: failed to reserve object for pinning it.\n");
+		return r;
+	}
+	if (robj->rdev->fbdev_robj == robj) {
+		mutex_lock(&robj->rdev->fbdev_info->lock);
+		radeon_object_kunmap(robj);
+	}
+	tmp = robj->tobj.mem.placement;
+	ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM);
+	robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING;
+	r = ttm_buffer_object_validate(&robj->tobj,
+				       robj->tobj.proposed_placement,
+				       false, false);
+	radeon_object_gpu_addr(robj);
+	if (gpu_addr != NULL) {
+		*gpu_addr = robj->gpu_addr;
+	}
+	robj->pin_count = 1;
+	if (unlikely(r != 0)) {
+		DRM_ERROR("radeon: failed to pin object.\n");
+	}
+	radeon_object_unreserve(robj);
+	if (robj->rdev->fbdev_robj == robj) {
+		if (!r) {
+			r = radeon_object_kmap(robj, &fbptr);
+		}
+		if (!r) {
+			robj->rdev->fbdev_info->screen_base = fbptr;
+			robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
+		}
+		mutex_unlock(&robj->rdev->fbdev_info->lock);
+	}
+	return r;
+}
+
+void radeon_object_unpin(struct radeon_object *robj)
+{
+	uint32_t flags;
+	void *fbptr;
+	int r;
+
+	spin_lock(&robj->tobj.lock);
+	if (!robj->pin_count) {
+		spin_unlock(&robj->tobj.lock);
+		printk(KERN_WARNING "Unpin not necessary for %p !\n", robj);
+		return;
+	}
+	robj->pin_count--;
+	if (robj->pin_count) {
+		spin_unlock(&robj->tobj.lock);
+		return;
+	}
+	spin_unlock(&robj->tobj.lock);
+	r = radeon_object_reserve(robj, false);
+	if (unlikely(r != 0)) {
+		DRM_ERROR("radeon: failed to reserve object for unpinning it.\n");
+		return;
+	}
+	if (robj->rdev->fbdev_robj == robj) {
+		mutex_lock(&robj->rdev->fbdev_info->lock);
+		radeon_object_kunmap(robj);
+	}
+	flags = robj->tobj.mem.placement;
+	robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT;
+	r = ttm_buffer_object_validate(&robj->tobj,
+				       robj->tobj.proposed_placement,
+				       false, false);
+	if (unlikely(r != 0)) {
+		DRM_ERROR("radeon: failed to unpin buffer.\n");
+	}
+	radeon_object_unreserve(robj);
+	if (robj->rdev->fbdev_robj == robj) {
+		if (!r) {
+			r = radeon_object_kmap(robj, &fbptr);
+		}
+		if (!r) {
+			robj->rdev->fbdev_info->screen_base = fbptr;
+			robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
+		}
+		mutex_unlock(&robj->rdev->fbdev_info->lock);
+	}
+}
+
+int radeon_object_wait(struct radeon_object *robj)
+{
+	int r = 0;
+
+	/* FIXME: should use block reservation instead */
+	r = radeon_object_reserve(robj, true);
+	if (unlikely(r != 0)) {
+		DRM_ERROR("radeon: failed to reserve object for waiting.\n");
+		return r;
+	}
+	spin_lock(&robj->tobj.lock);
+	if (robj->tobj.sync_obj) {
+		r = ttm_bo_wait(&robj->tobj, true, false, false);
+	}
+	spin_unlock(&robj->tobj.lock);
+	radeon_object_unreserve(robj);
+	return r;
+}
+
+int radeon_object_evict_vram(struct radeon_device *rdev)
+{
+	if (rdev->flags & RADEON_IS_IGP) {
+		/* Useless to evict on IGP chips */
+		return 0;
+	}
+	return ttm_bo_evict_mm(&rdev->mman.bdev, TTM_PL_VRAM);
+}
+
+void radeon_object_force_delete(struct radeon_device *rdev)
+{
+	struct radeon_object *robj, *n;
+	struct drm_gem_object *gobj;
+
+	if (list_empty(&rdev->gem.objects)) {
+		return;
+	}
+	DRM_ERROR("Userspace still has active objects !\n");
+	list_for_each_entry_safe(robj, n, &rdev->gem.objects, list) {
+		mutex_lock(&rdev->ddev->struct_mutex);
+		gobj = robj->gobj;
+		DRM_ERROR("Force free for (%p,%p,%lu,%lu)\n",
+			  gobj, robj, (unsigned long)gobj->size,
+			  *((unsigned long *)&gobj->refcount));
+		list_del_init(&robj->list);
+		radeon_object_unref(&robj);
+		gobj->driver_private = NULL;
+		drm_gem_object_unreference(gobj);
+		mutex_unlock(&rdev->ddev->struct_mutex);
+	}
+}
+
+int radeon_object_init(struct radeon_device *rdev)
+{
+	return radeon_ttm_init(rdev);
+}
+
+void radeon_object_fini(struct radeon_device *rdev)
+{
+	radeon_ttm_fini(rdev);
+}
+
+void radeon_object_list_add_object(struct radeon_object_list *lobj,
+				   struct list_head *head)
+{
+	if (lobj->wdomain) {
+		list_add(&lobj->list, head);
+	} else {
+		list_add_tail(&lobj->list, head);
+	}
+}
+
+int radeon_object_list_reserve(struct list_head *head)
+{
+	struct radeon_object_list *lobj;
+	struct list_head *i;
+	int r;
+
+	list_for_each(i, head) {
+		lobj = list_entry(i, struct radeon_object_list, list);
+		if (!lobj->robj->pin_count) {
+			r = radeon_object_reserve(lobj->robj, true);
+			if (unlikely(r != 0)) {
+				DRM_ERROR("radeon: failed to reserve object.\n");
+				return r;
+			}
+		} else {
+		}
+	}
+	return 0;
+}
+
+void radeon_object_list_unreserve(struct list_head *head)
+{
+	struct radeon_object_list *lobj;
+	struct list_head *i;
+
+	list_for_each(i, head) {
+		lobj = list_entry(i, struct radeon_object_list, list);
+		if (!lobj->robj->pin_count) {
+			radeon_object_unreserve(lobj->robj);
+		} else {
+		}
+	}
+}
+
+int radeon_object_list_validate(struct list_head *head, void *fence)
+{
+	struct radeon_object_list *lobj;
+	struct radeon_object *robj;
+	struct radeon_fence *old_fence = NULL;
+	struct list_head *i;
+	uint32_t flags;
+	int r;
+
+	r = radeon_object_list_reserve(head);
+	if (unlikely(r != 0)) {
+		radeon_object_list_unreserve(head);
+		return r;
+	}
+	list_for_each(i, head) {
+		lobj = list_entry(i, struct radeon_object_list, list);
+		robj = lobj->robj;
+		if (lobj->wdomain) {
+			flags = radeon_object_flags_from_domain(lobj->wdomain);
+			flags |= TTM_PL_FLAG_TT;
+		} else {
+			flags = radeon_object_flags_from_domain(lobj->rdomain);
+			flags |= TTM_PL_FLAG_TT;
+			flags |= TTM_PL_FLAG_VRAM;
+		}
+		if (!robj->pin_count) {
+			robj->tobj.proposed_placement = flags | TTM_PL_MASK_CACHING;
+			r = ttm_buffer_object_validate(&robj->tobj,
+						       robj->tobj.proposed_placement,
+						       true, false);
+			if (unlikely(r)) {
+				radeon_object_list_unreserve(head);
+				DRM_ERROR("radeon: failed to validate.\n");
+				return r;
+			}
+			radeon_object_gpu_addr(robj);
+		}
+		lobj->gpu_offset = robj->gpu_addr;
+		if (fence) {
+			old_fence = (struct radeon_fence *)robj->tobj.sync_obj;
+			robj->tobj.sync_obj = radeon_fence_ref(fence);
+			robj->tobj.sync_obj_arg = NULL;
+		}
+		if (old_fence) {
+			radeon_fence_unref(&old_fence);
+		}
+	}
+	return 0;
+}
+
+void radeon_object_list_unvalidate(struct list_head *head)
+{
+	struct radeon_object_list *lobj;
+	struct radeon_fence *old_fence = NULL;
+	struct list_head *i;
+
+	list_for_each(i, head) {
+		lobj = list_entry(i, struct radeon_object_list, list);
+		old_fence = (struct radeon_fence *)lobj->robj->tobj.sync_obj;
+		lobj->robj->tobj.sync_obj = NULL;
+		if (old_fence) {
+			radeon_fence_unref(&old_fence);
+		}
+	}
+	radeon_object_list_unreserve(head);
+}
+
+void radeon_object_list_clean(struct list_head *head)
+{
+	radeon_object_list_unreserve(head);
+}
+
+int radeon_object_fbdev_mmap(struct radeon_object *robj,
+			     struct vm_area_struct *vma)
+{
+	return ttm_fbdev_mmap(vma, &robj->tobj);
+}
+
+unsigned long radeon_object_size(struct radeon_object *robj)
+{
+	return robj->tobj.num_pages << PAGE_SHIFT;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
new file mode 100644
index 00000000000..473e4775dc5
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RADEON_OBJECT_H__
+#define __RADEON_OBJECT_H__
+
+#include <ttm/ttm_bo_api.h>
+#include <ttm/ttm_bo_driver.h>
+#include <ttm/ttm_placement.h>
+#include <ttm/ttm_module.h>
+
+/*
+ * TTM.
+ */
+struct radeon_mman {
+	struct ttm_global_reference	mem_global_ref;
+	bool				mem_global_referenced;
+	struct ttm_bo_device		bdev;
+};
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h
new file mode 100644
index 00000000000..6d3d90406a2
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_reg.h
@@ -0,0 +1,3570 @@
+/*
+ * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and
+ *                VA Linux Systems Inc., Fremont, California.
+ *
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation on the rights to use, copy, modify, merge,
+ * publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT.  IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR
+ * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Authors:
+ *   Kevin E. Martin <martin@xfree86.org>
+ *   Rickard E. Faith <faith@valinux.com>
+ *   Alan Hourihane <alanh@fairlite.demon.co.uk>
+ *
+ * References:
+ *
+ * !!!! FIXME !!!!
+ *   RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical
+ *   Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April
+ *   1999.
+ *
+ * !!!! FIXME !!!!
+ *   RAGE 128 Software Development Manual (Technical Reference Manual P/N
+ *   SDK-G04000 Rev. 0.01), ATI Technologies: June 1999.
+ *
+ */
+
+/* !!!! FIXME !!!!  NOTE: THIS FILE HAS BEEN CONVERTED FROM r128_reg.h
+ * AND CONTAINS REGISTERS AND REGISTER DEFINITIONS THAT ARE NOT CORRECT
+ * ON THE RADEON.  A FULL AUDIT OF THIS CODE IS NEEDED!  */
+#ifndef _RADEON_REG_H_
+#define _RADEON_REG_H_
+
+#include "r300_reg.h"
+#include "r500_reg.h"
+#include "r600_reg.h"
+
+
+#define RADEON_MC_AGP_LOCATION		0x014c
+#define		RADEON_MC_AGP_START_MASK	0x0000FFFF
+#define		RADEON_MC_AGP_START_SHIFT	0
+#define		RADEON_MC_AGP_TOP_MASK		0xFFFF0000
+#define		RADEON_MC_AGP_TOP_SHIFT		16
+#define RADEON_MC_FB_LOCATION		0x0148
+#define		RADEON_MC_FB_START_MASK		0x0000FFFF
+#define		RADEON_MC_FB_START_SHIFT	0
+#define		RADEON_MC_FB_TOP_MASK		0xFFFF0000
+#define		RADEON_MC_FB_TOP_SHIFT		16
+#define RADEON_AGP_BASE_2		0x015c /* r200+ only */
+#define RADEON_AGP_BASE			0x0170
+
+#define ATI_DATATYPE_VQ				0
+#define ATI_DATATYPE_CI4			1
+#define ATI_DATATYPE_CI8			2
+#define ATI_DATATYPE_ARGB1555			3
+#define ATI_DATATYPE_RGB565			4
+#define ATI_DATATYPE_RGB888			5
+#define ATI_DATATYPE_ARGB8888			6
+#define ATI_DATATYPE_RGB332			7
+#define ATI_DATATYPE_Y8				8
+#define ATI_DATATYPE_RGB8			9
+#define ATI_DATATYPE_CI16			10
+#define ATI_DATATYPE_VYUY_422			11
+#define ATI_DATATYPE_YVYU_422			12
+#define ATI_DATATYPE_AYUV_444			14
+#define ATI_DATATYPE_ARGB4444			15
+
+				/* Registers for 2D/Video/Overlay */
+#define RADEON_ADAPTER_ID                   0x0f2c /* PCI */
+#define RADEON_AGP_BASE                     0x0170
+#define RADEON_AGP_CNTL                     0x0174
+#       define RADEON_AGP_APER_SIZE_256MB   (0x00 << 0)
+#       define RADEON_AGP_APER_SIZE_128MB   (0x20 << 0)
+#       define RADEON_AGP_APER_SIZE_64MB    (0x30 << 0)
+#       define RADEON_AGP_APER_SIZE_32MB    (0x38 << 0)
+#       define RADEON_AGP_APER_SIZE_16MB    (0x3c << 0)
+#       define RADEON_AGP_APER_SIZE_8MB     (0x3e << 0)
+#       define RADEON_AGP_APER_SIZE_4MB     (0x3f << 0)
+#       define RADEON_AGP_APER_SIZE_MASK    (0x3f << 0)
+#define RADEON_STATUS_PCI_CONFIG            0x06
+#       define RADEON_CAP_LIST              0x100000
+#define RADEON_CAPABILITIES_PTR_PCI_CONFIG  0x34 /* offset in PCI config*/
+#       define RADEON_CAP_PTR_MASK          0xfc /* mask off reserved bits of CAP_PTR */
+#       define RADEON_CAP_ID_NULL           0x00 /* End of capability list */
+#       define RADEON_CAP_ID_AGP            0x02 /* AGP capability ID */
+#       define RADEON_CAP_ID_EXP            0x10 /* PCI Express */
+#define RADEON_AGP_COMMAND                  0x0f60 /* PCI */
+#define RADEON_AGP_COMMAND_PCI_CONFIG       0x0060 /* offset in PCI config*/
+#       define RADEON_AGP_ENABLE            (1<<8)
+#define RADEON_AGP_PLL_CNTL                 0x000b /* PLL */
+#define RADEON_AGP_STATUS                   0x0f5c /* PCI */
+#       define RADEON_AGP_1X_MODE           0x01
+#       define RADEON_AGP_2X_MODE           0x02
+#       define RADEON_AGP_4X_MODE           0x04
+#       define RADEON_AGP_FW_MODE           0x10
+#       define RADEON_AGP_MODE_MASK         0x17
+#       define RADEON_AGPv3_MODE            0x08
+#       define RADEON_AGPv3_4X_MODE         0x01
+#       define RADEON_AGPv3_8X_MODE         0x02
+#define RADEON_ATTRDR                       0x03c1 /* VGA */
+#define RADEON_ATTRDW                       0x03c0 /* VGA */
+#define RADEON_ATTRX                        0x03c0 /* VGA */
+#define RADEON_AUX_SC_CNTL                  0x1660
+#       define RADEON_AUX1_SC_EN            (1 << 0)
+#       define RADEON_AUX1_SC_MODE_OR       (0 << 1)
+#       define RADEON_AUX1_SC_MODE_NAND     (1 << 1)
+#       define RADEON_AUX2_SC_EN            (1 << 2)
+#       define RADEON_AUX2_SC_MODE_OR       (0 << 3)
+#       define RADEON_AUX2_SC_MODE_NAND     (1 << 3)
+#       define RADEON_AUX3_SC_EN            (1 << 4)
+#       define RADEON_AUX3_SC_MODE_OR       (0 << 5)
+#       define RADEON_AUX3_SC_MODE_NAND     (1 << 5)
+#define RADEON_AUX1_SC_BOTTOM               0x1670
+#define RADEON_AUX1_SC_LEFT                 0x1664
+#define RADEON_AUX1_SC_RIGHT                0x1668
+#define RADEON_AUX1_SC_TOP                  0x166c
+#define RADEON_AUX2_SC_BOTTOM               0x1680
+#define RADEON_AUX2_SC_LEFT                 0x1674
+#define RADEON_AUX2_SC_RIGHT                0x1678
+#define RADEON_AUX2_SC_TOP                  0x167c
+#define RADEON_AUX3_SC_BOTTOM               0x1690
+#define RADEON_AUX3_SC_LEFT                 0x1684
+#define RADEON_AUX3_SC_RIGHT                0x1688
+#define RADEON_AUX3_SC_TOP                  0x168c
+#define RADEON_AUX_WINDOW_HORZ_CNTL         0x02d8
+#define RADEON_AUX_WINDOW_VERT_CNTL         0x02dc
+
+#define RADEON_BASE_CODE                    0x0f0b
+#define RADEON_BIOS_0_SCRATCH               0x0010
+#       define RADEON_FP_PANEL_SCALABLE     (1 << 16)
+#       define RADEON_FP_PANEL_SCALE_EN     (1 << 17)
+#       define RADEON_FP_CHIP_SCALE_EN      (1 << 18)
+#       define RADEON_DRIVER_BRIGHTNESS_EN  (1 << 26)
+#       define RADEON_DISPLAY_ROT_MASK      (3 << 28)
+#       define RADEON_DISPLAY_ROT_00        (0 << 28)
+#       define RADEON_DISPLAY_ROT_90        (1 << 28)
+#       define RADEON_DISPLAY_ROT_180       (2 << 28)
+#       define RADEON_DISPLAY_ROT_270       (3 << 28)
+#define RADEON_BIOS_1_SCRATCH               0x0014
+#define RADEON_BIOS_2_SCRATCH               0x0018
+#define RADEON_BIOS_3_SCRATCH               0x001c
+#define RADEON_BIOS_4_SCRATCH               0x0020
+#       define RADEON_CRT1_ATTACHED_MASK    (3 << 0)
+#       define RADEON_CRT1_ATTACHED_MONO    (1 << 0)
+#       define RADEON_CRT1_ATTACHED_COLOR   (2 << 0)
+#       define RADEON_LCD1_ATTACHED         (1 << 2)
+#       define RADEON_DFP1_ATTACHED         (1 << 3)
+#       define RADEON_TV1_ATTACHED_MASK     (3 << 4)
+#       define RADEON_TV1_ATTACHED_COMP     (1 << 4)
+#       define RADEON_TV1_ATTACHED_SVIDEO   (2 << 4)
+#       define RADEON_CRT2_ATTACHED_MASK    (3 << 8)
+#       define RADEON_CRT2_ATTACHED_MONO    (1 << 8)
+#       define RADEON_CRT2_ATTACHED_COLOR   (2 << 8)
+#       define RADEON_DFP2_ATTACHED         (1 << 11)
+#define RADEON_BIOS_5_SCRATCH               0x0024
+#       define RADEON_LCD1_ON               (1 << 0)
+#       define RADEON_CRT1_ON               (1 << 1)
+#       define RADEON_TV1_ON                (1 << 2)
+#       define RADEON_DFP1_ON               (1 << 3)
+#       define RADEON_CRT2_ON               (1 << 5)
+#       define RADEON_CV1_ON                (1 << 6)
+#       define RADEON_DFP2_ON               (1 << 7)
+#       define RADEON_LCD1_CRTC_MASK        (1 << 8)
+#       define RADEON_LCD1_CRTC_SHIFT       8
+#       define RADEON_CRT1_CRTC_MASK        (1 << 9)
+#       define RADEON_CRT1_CRTC_SHIFT       9
+#       define RADEON_TV1_CRTC_MASK         (1 << 10)
+#       define RADEON_TV1_CRTC_SHIFT        10
+#       define RADEON_DFP1_CRTC_MASK        (1 << 11)
+#       define RADEON_DFP1_CRTC_SHIFT       11
+#       define RADEON_CRT2_CRTC_MASK        (1 << 12)
+#       define RADEON_CRT2_CRTC_SHIFT       12
+#       define RADEON_CV1_CRTC_MASK         (1 << 13)
+#       define RADEON_CV1_CRTC_SHIFT        13
+#       define RADEON_DFP2_CRTC_MASK        (1 << 14)
+#       define RADEON_DFP2_CRTC_SHIFT       14
+#       define RADEON_ACC_REQ_LCD1          (1 << 16)
+#       define RADEON_ACC_REQ_CRT1          (1 << 17)
+#       define RADEON_ACC_REQ_TV1           (1 << 18)
+#       define RADEON_ACC_REQ_DFP1          (1 << 19)
+#       define RADEON_ACC_REQ_CRT2          (1 << 21)
+#       define RADEON_ACC_REQ_TV2           (1 << 22)
+#       define RADEON_ACC_REQ_DFP2          (1 << 23)
+#define RADEON_BIOS_6_SCRATCH               0x0028
+#       define RADEON_ACC_MODE_CHANGE       (1 << 2)
+#       define RADEON_EXT_DESKTOP_MODE      (1 << 3)
+#       define RADEON_LCD_DPMS_ON           (1 << 20)
+#       define RADEON_CRT_DPMS_ON           (1 << 21)
+#       define RADEON_TV_DPMS_ON            (1 << 22)
+#       define RADEON_DFP_DPMS_ON           (1 << 23)
+#       define RADEON_DPMS_MASK             (3 << 24)
+#       define RADEON_DPMS_ON               (0 << 24)
+#       define RADEON_DPMS_STANDBY          (1 << 24)
+#       define RADEON_DPMS_SUSPEND          (2 << 24)
+#       define RADEON_DPMS_OFF              (3 << 24)
+#       define RADEON_SCREEN_BLANKING       (1 << 26)
+#       define RADEON_DRIVER_CRITICAL       (1 << 27)
+#       define RADEON_DISPLAY_SWITCHING_DIS (1 << 30)
+#define RADEON_BIOS_7_SCRATCH               0x002c
+#       define RADEON_SYS_HOTKEY            (1 << 10)
+#       define RADEON_DRV_LOADED            (1 << 12)
+#define RADEON_BIOS_ROM                     0x0f30 /* PCI */
+#define RADEON_BIST                         0x0f0f /* PCI */
+#define RADEON_BRUSH_DATA0                  0x1480
+#define RADEON_BRUSH_DATA1                  0x1484
+#define RADEON_BRUSH_DATA10                 0x14a8
+#define RADEON_BRUSH_DATA11                 0x14ac
+#define RADEON_BRUSH_DATA12                 0x14b0
+#define RADEON_BRUSH_DATA13                 0x14b4
+#define RADEON_BRUSH_DATA14                 0x14b8
+#define RADEON_BRUSH_DATA15                 0x14bc
+#define RADEON_BRUSH_DATA16                 0x14c0
+#define RADEON_BRUSH_DATA17                 0x14c4
+#define RADEON_BRUSH_DATA18                 0x14c8
+#define RADEON_BRUSH_DATA19                 0x14cc
+#define RADEON_BRUSH_DATA2                  0x1488
+#define RADEON_BRUSH_DATA20                 0x14d0
+#define RADEON_BRUSH_DATA21                 0x14d4
+#define RADEON_BRUSH_DATA22                 0x14d8
+#define RADEON_BRUSH_DATA23                 0x14dc
+#define RADEON_BRUSH_DATA24                 0x14e0
+#define RADEON_BRUSH_DATA25                 0x14e4
+#define RADEON_BRUSH_DATA26                 0x14e8
+#define RADEON_BRUSH_DATA27                 0x14ec
+#define RADEON_BRUSH_DATA28                 0x14f0
+#define RADEON_BRUSH_DATA29                 0x14f4
+#define RADEON_BRUSH_DATA3                  0x148c
+#define RADEON_BRUSH_DATA30                 0x14f8
+#define RADEON_BRUSH_DATA31                 0x14fc
+#define RADEON_BRUSH_DATA32                 0x1500
+#define RADEON_BRUSH_DATA33                 0x1504
+#define RADEON_BRUSH_DATA34                 0x1508
+#define RADEON_BRUSH_DATA35                 0x150c
+#define RADEON_BRUSH_DATA36                 0x1510
+#define RADEON_BRUSH_DATA37                 0x1514
+#define RADEON_BRUSH_DATA38                 0x1518
+#define RADEON_BRUSH_DATA39                 0x151c
+#define RADEON_BRUSH_DATA4                  0x1490
+#define RADEON_BRUSH_DATA40                 0x1520
+#define RADEON_BRUSH_DATA41                 0x1524
+#define RADEON_BRUSH_DATA42                 0x1528
+#define RADEON_BRUSH_DATA43                 0x152c
+#define RADEON_BRUSH_DATA44                 0x1530
+#define RADEON_BRUSH_DATA45                 0x1534
+#define RADEON_BRUSH_DATA46                 0x1538
+#define RADEON_BRUSH_DATA47                 0x153c
+#define RADEON_BRUSH_DATA48                 0x1540
+#define RADEON_BRUSH_DATA49                 0x1544
+#define RADEON_BRUSH_DATA5                  0x1494
+#define RADEON_BRUSH_DATA50                 0x1548
+#define RADEON_BRUSH_DATA51                 0x154c
+#define RADEON_BRUSH_DATA52                 0x1550
+#define RADEON_BRUSH_DATA53                 0x1554
+#define RADEON_BRUSH_DATA54                 0x1558
+#define RADEON_BRUSH_DATA55                 0x155c
+#define RADEON_BRUSH_DATA56                 0x1560
+#define RADEON_BRUSH_DATA57                 0x1564
+#define RADEON_BRUSH_DATA58                 0x1568
+#define RADEON_BRUSH_DATA59                 0x156c
+#define RADEON_BRUSH_DATA6                  0x1498
+#define RADEON_BRUSH_DATA60                 0x1570
+#define RADEON_BRUSH_DATA61                 0x1574
+#define RADEON_BRUSH_DATA62                 0x1578
+#define RADEON_BRUSH_DATA63                 0x157c
+#define RADEON_BRUSH_DATA7                  0x149c
+#define RADEON_BRUSH_DATA8                  0x14a0
+#define RADEON_BRUSH_DATA9                  0x14a4
+#define RADEON_BRUSH_SCALE                  0x1470
+#define RADEON_BRUSH_Y_X                    0x1474
+#define RADEON_BUS_CNTL                     0x0030
+#       define RADEON_BUS_MASTER_DIS         (1 << 6)
+#       define RADEON_BUS_BIOS_DIS_ROM       (1 << 12)
+#       define RADEON_BUS_RD_DISCARD_EN      (1 << 24)
+#       define RADEON_BUS_RD_ABORT_EN        (1 << 25)
+#       define RADEON_BUS_MSTR_DISCONNECT_EN (1 << 28)
+#       define RADEON_BUS_WRT_BURST          (1 << 29)
+#       define RADEON_BUS_READ_BURST         (1 << 30)
+#define RADEON_BUS_CNTL1                    0x0034
+#       define RADEON_BUS_WAIT_ON_LOCK_EN    (1 << 4)
+
+/* #define RADEON_PCIE_INDEX                   0x0030 */
+/* #define RADEON_PCIE_DATA                    0x0034 */
+#define RADEON_PCIE_LC_LINK_WIDTH_CNTL             0xa2 /* PCIE */
+#       define RADEON_PCIE_LC_LINK_WIDTH_SHIFT     0
+#       define RADEON_PCIE_LC_LINK_WIDTH_MASK      0x7
+#       define RADEON_PCIE_LC_LINK_WIDTH_X0        0
+#       define RADEON_PCIE_LC_LINK_WIDTH_X1        1
+#       define RADEON_PCIE_LC_LINK_WIDTH_X2        2
+#       define RADEON_PCIE_LC_LINK_WIDTH_X4        3
+#       define RADEON_PCIE_LC_LINK_WIDTH_X8        4
+#       define RADEON_PCIE_LC_LINK_WIDTH_X12       5
+#       define RADEON_PCIE_LC_LINK_WIDTH_X16       6
+#       define RADEON_PCIE_LC_LINK_WIDTH_RD_SHIFT  4
+#       define RADEON_PCIE_LC_LINK_WIDTH_RD_MASK   0x70
+#       define RADEON_PCIE_LC_RECONFIG_NOW         (1 << 8)
+#       define RADEON_PCIE_LC_RECONFIG_LATER       (1 << 9)
+#       define RADEON_PCIE_LC_SHORT_RECONFIG_EN    (1 << 10)
+
+#define RADEON_CACHE_CNTL                   0x1724
+#define RADEON_CACHE_LINE                   0x0f0c /* PCI */
+#define RADEON_CAPABILITIES_ID              0x0f50 /* PCI */
+#define RADEON_CAPABILITIES_PTR             0x0f34 /* PCI */
+#define RADEON_CLK_PIN_CNTL                 0x0001 /* PLL */
+#       define RADEON_DONT_USE_XTALIN       (1 << 4)
+#       define RADEON_SCLK_DYN_START_CNTL   (1 << 15)
+#define RADEON_CLOCK_CNTL_DATA              0x000c
+#define RADEON_CLOCK_CNTL_INDEX             0x0008
+#       define RADEON_PLL_WR_EN             (1 << 7)
+#       define RADEON_PLL_DIV_SEL           (3 << 8)
+#       define RADEON_PLL2_DIV_SEL_MASK     (~(3 << 8))
+#define RADEON_CLK_PWRMGT_CNTL              0x0014
+#       define RADEON_ENGIN_DYNCLK_MODE     (1 << 12)
+#       define RADEON_ACTIVE_HILO_LAT_MASK  (3 << 13)
+#       define RADEON_ACTIVE_HILO_LAT_SHIFT 13
+#       define RADEON_DISP_DYN_STOP_LAT_MASK (1 << 12)
+#       define RADEON_MC_BUSY               (1 << 16)
+#       define RADEON_DLL_READY             (1 << 19)
+#       define RADEON_CG_NO1_DEBUG_0        (1 << 24)
+#       define RADEON_CG_NO1_DEBUG_MASK     (0x1f << 24)
+#       define RADEON_DYN_STOP_MODE_MASK    (7 << 21)
+#       define RADEON_TVPLL_PWRMGT_OFF      (1 << 30)
+#       define RADEON_TVCLK_TURNOFF         (1 << 31)
+#define RADEON_PLL_PWRMGT_CNTL              0x0015 /* PLL */
+#       define RADEON_TCL_BYPASS_DISABLE    (1 << 20)
+#define RADEON_CLR_CMP_CLR_3D               0x1a24
+#define RADEON_CLR_CMP_CLR_DST              0x15c8
+#define RADEON_CLR_CMP_CLR_SRC              0x15c4
+#define RADEON_CLR_CMP_CNTL                 0x15c0
+#       define RADEON_SRC_CMP_EQ_COLOR      (4 <<  0)
+#       define RADEON_SRC_CMP_NEQ_COLOR     (5 <<  0)
+#       define RADEON_CLR_CMP_SRC_SOURCE    (1 << 24)
+#define RADEON_CLR_CMP_MASK                 0x15cc
+#       define RADEON_CLR_CMP_MSK           0xffffffff
+#define RADEON_CLR_CMP_MASK_3D              0x1A28
+#define RADEON_COMMAND                      0x0f04 /* PCI */
+#define RADEON_COMPOSITE_SHADOW_ID          0x1a0c
+#define RADEON_CONFIG_APER_0_BASE           0x0100
+#define RADEON_CONFIG_APER_1_BASE           0x0104
+#define RADEON_CONFIG_APER_SIZE             0x0108
+#define RADEON_CONFIG_BONDS                 0x00e8
+#define RADEON_CONFIG_CNTL                  0x00e0
+#       define RADEON_CFG_ATI_REV_A11       (0   << 16)
+#       define RADEON_CFG_ATI_REV_A12       (1   << 16)
+#       define RADEON_CFG_ATI_REV_A13       (2   << 16)
+#       define RADEON_CFG_ATI_REV_ID_MASK   (0xf << 16)
+#define RADEON_CONFIG_MEMSIZE               0x00f8
+#define RADEON_CONFIG_MEMSIZE_EMBEDDED      0x0114
+#define RADEON_CONFIG_REG_1_BASE            0x010c
+#define RADEON_CONFIG_REG_APER_SIZE         0x0110
+#define RADEON_CONFIG_XSTRAP                0x00e4
+#define RADEON_CONSTANT_COLOR_C             0x1d34
+#       define RADEON_CONSTANT_COLOR_MASK   0x00ffffff
+#       define RADEON_CONSTANT_COLOR_ONE    0x00ffffff
+#       define RADEON_CONSTANT_COLOR_ZERO   0x00000000
+#define RADEON_CRC_CMDFIFO_ADDR             0x0740
+#define RADEON_CRC_CMDFIFO_DOUT             0x0744
+#define RADEON_GRPH_BUFFER_CNTL             0x02f0
+#       define RADEON_GRPH_START_REQ_MASK          (0x7f)
+#       define RADEON_GRPH_START_REQ_SHIFT         0
+#       define RADEON_GRPH_STOP_REQ_MASK           (0x7f<<8)
+#       define RADEON_GRPH_STOP_REQ_SHIFT          8
+#       define RADEON_GRPH_CRITICAL_POINT_MASK     (0x7f<<16)
+#       define RADEON_GRPH_CRITICAL_POINT_SHIFT    16
+#       define RADEON_GRPH_CRITICAL_CNTL           (1<<28)
+#       define RADEON_GRPH_BUFFER_SIZE             (1<<29)
+#       define RADEON_GRPH_CRITICAL_AT_SOF         (1<<30)
+#       define RADEON_GRPH_STOP_CNTL               (1<<31)
+#define RADEON_GRPH2_BUFFER_CNTL            0x03f0
+#       define RADEON_GRPH2_START_REQ_MASK         (0x7f)
+#       define RADEON_GRPH2_START_REQ_SHIFT         0
+#       define RADEON_GRPH2_STOP_REQ_MASK          (0x7f<<8)
+#       define RADEON_GRPH2_STOP_REQ_SHIFT         8
+#       define RADEON_GRPH2_CRITICAL_POINT_MASK    (0x7f<<16)
+#       define RADEON_GRPH2_CRITICAL_POINT_SHIFT   16
+#       define RADEON_GRPH2_CRITICAL_CNTL          (1<<28)
+#       define RADEON_GRPH2_BUFFER_SIZE            (1<<29)
+#       define RADEON_GRPH2_CRITICAL_AT_SOF        (1<<30)
+#       define RADEON_GRPH2_STOP_CNTL              (1<<31)
+#define RADEON_CRTC_CRNT_FRAME              0x0214
+#define RADEON_CRTC_EXT_CNTL                0x0054
+#       define RADEON_CRTC_VGA_XOVERSCAN    (1 <<  0)
+#       define RADEON_VGA_ATI_LINEAR        (1 <<  3)
+#       define RADEON_XCRT_CNT_EN           (1 <<  6)
+#       define RADEON_CRTC_HSYNC_DIS        (1 <<  8)
+#       define RADEON_CRTC_VSYNC_DIS        (1 <<  9)
+#       define RADEON_CRTC_DISPLAY_DIS      (1 << 10)
+#       define RADEON_CRTC_SYNC_TRISTAT     (1 << 11)
+#       define RADEON_CRTC_CRT_ON           (1 << 15)
+#define RADEON_CRTC_EXT_CNTL_DPMS_BYTE      0x0055
+#       define RADEON_CRTC_HSYNC_DIS_BYTE   (1 <<  0)
+#       define RADEON_CRTC_VSYNC_DIS_BYTE   (1 <<  1)
+#       define RADEON_CRTC_DISPLAY_DIS_BYTE (1 <<  2)
+#define RADEON_CRTC_GEN_CNTL                0x0050
+#       define RADEON_CRTC_DBL_SCAN_EN      (1 <<  0)
+#       define RADEON_CRTC_INTERLACE_EN     (1 <<  1)
+#       define RADEON_CRTC_CSYNC_EN         (1 <<  4)
+#       define RADEON_CRTC_ICON_EN          (1 << 15)
+#       define RADEON_CRTC_CUR_EN           (1 << 16)
+#       define RADEON_CRTC_CUR_MODE_MASK    (7 << 20)
+#       define RADEON_CRTC_CUR_MODE_SHIFT   20
+#       define RADEON_CRTC_CUR_MODE_MONO    0
+#       define RADEON_CRTC_CUR_MODE_24BPP   2
+#       define RADEON_CRTC_EXT_DISP_EN      (1 << 24)
+#       define RADEON_CRTC_EN               (1 << 25)
+#       define RADEON_CRTC_DISP_REQ_EN_B    (1 << 26)
+#define RADEON_CRTC2_GEN_CNTL               0x03f8
+#       define RADEON_CRTC2_DBL_SCAN_EN     (1 <<  0)
+#       define RADEON_CRTC2_INTERLACE_EN    (1 <<  1)
+#       define RADEON_CRTC2_SYNC_TRISTAT    (1 <<  4)
+#       define RADEON_CRTC2_HSYNC_TRISTAT   (1 <<  5)
+#       define RADEON_CRTC2_VSYNC_TRISTAT   (1 <<  6)
+#       define RADEON_CRTC2_CRT2_ON         (1 <<  7)
+#       define RADEON_CRTC2_PIX_WIDTH_SHIFT 8
+#       define RADEON_CRTC2_PIX_WIDTH_MASK  (0xf << 8)
+#       define RADEON_CRTC2_ICON_EN         (1 << 15)
+#       define RADEON_CRTC2_CUR_EN          (1 << 16)
+#       define RADEON_CRTC2_CUR_MODE_MASK   (7 << 20)
+#       define RADEON_CRTC2_DISP_DIS        (1 << 23)
+#       define RADEON_CRTC2_EN              (1 << 25)
+#       define RADEON_CRTC2_DISP_REQ_EN_B   (1 << 26)
+#       define RADEON_CRTC2_CSYNC_EN        (1 << 27)
+#       define RADEON_CRTC2_HSYNC_DIS       (1 << 28)
+#       define RADEON_CRTC2_VSYNC_DIS       (1 << 29)
+#define RADEON_CRTC_MORE_CNTL               0x27c
+#       define RADEON_CRTC_AUTO_HORZ_CENTER_EN (1<<2)
+#       define RADEON_CRTC_AUTO_VERT_CENTER_EN (1<<3)
+#       define RADEON_CRTC_H_CUTOFF_ACTIVE_EN (1<<4)
+#       define RADEON_CRTC_V_CUTOFF_ACTIVE_EN (1<<5)
+#define RADEON_CRTC_GUI_TRIG_VLINE          0x0218
+#define RADEON_CRTC_H_SYNC_STRT_WID         0x0204
+#       define RADEON_CRTC_H_SYNC_STRT_PIX        (0x07  <<  0)
+#       define RADEON_CRTC_H_SYNC_STRT_CHAR       (0x3ff <<  3)
+#       define RADEON_CRTC_H_SYNC_STRT_CHAR_SHIFT 3
+#       define RADEON_CRTC_H_SYNC_WID             (0x3f  << 16)
+#       define RADEON_CRTC_H_SYNC_WID_SHIFT       16
+#       define RADEON_CRTC_H_SYNC_POL             (1     << 23)
+#define RADEON_CRTC2_H_SYNC_STRT_WID        0x0304
+#       define RADEON_CRTC2_H_SYNC_STRT_PIX        (0x07  <<  0)
+#       define RADEON_CRTC2_H_SYNC_STRT_CHAR       (0x3ff <<  3)
+#       define RADEON_CRTC2_H_SYNC_STRT_CHAR_SHIFT 3
+#       define RADEON_CRTC2_H_SYNC_WID             (0x3f  << 16)
+#       define RADEON_CRTC2_H_SYNC_WID_SHIFT       16
+#       define RADEON_CRTC2_H_SYNC_POL             (1     << 23)
+#define RADEON_CRTC_H_TOTAL_DISP            0x0200
+#       define RADEON_CRTC_H_TOTAL          (0x03ff << 0)
+#       define RADEON_CRTC_H_TOTAL_SHIFT    0
+#       define RADEON_CRTC_H_DISP           (0x01ff << 16)
+#       define RADEON_CRTC_H_DISP_SHIFT     16
+#define RADEON_CRTC2_H_TOTAL_DISP           0x0300
+#       define RADEON_CRTC2_H_TOTAL         (0x03ff << 0)
+#       define RADEON_CRTC2_H_TOTAL_SHIFT   0
+#       define RADEON_CRTC2_H_DISP          (0x01ff << 16)
+#       define RADEON_CRTC2_H_DISP_SHIFT    16
+
+#define RADEON_CRTC_OFFSET_RIGHT	    0x0220
+#define RADEON_CRTC_OFFSET                  0x0224
+#	define RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET (1<<30)
+#	define RADEON_CRTC_OFFSET__OFFSET_LOCK	   (1<<31)
+
+#define RADEON_CRTC2_OFFSET                 0x0324
+#	define RADEON_CRTC2_OFFSET__GUI_TRIG_OFFSET (1<<30)
+#	define RADEON_CRTC2_OFFSET__OFFSET_LOCK	    (1<<31)
+#define RADEON_CRTC_OFFSET_CNTL             0x0228
+#       define RADEON_CRTC_TILE_LINE_SHIFT              0
+#       define RADEON_CRTC_TILE_LINE_RIGHT_SHIFT        4
+#	define R300_CRTC_X_Y_MODE_EN_RIGHT		(1 << 6)
+#	define R300_CRTC_MICRO_TILE_BUFFER_RIGHT_MASK   (3 << 7)
+#	define R300_CRTC_MICRO_TILE_BUFFER_RIGHT_AUTO   (0 << 7)
+#	define R300_CRTC_MICRO_TILE_BUFFER_RIGHT_SINGLE (1 << 7)
+#	define R300_CRTC_MICRO_TILE_BUFFER_RIGHT_DOUBLE (2 << 7)
+#	define R300_CRTC_MICRO_TILE_BUFFER_RIGHT_DIS    (3 << 7)
+#	define R300_CRTC_X_Y_MODE_EN			(1 << 9)
+#	define R300_CRTC_MICRO_TILE_BUFFER_MASK		(3 << 10)
+#	define R300_CRTC_MICRO_TILE_BUFFER_AUTO		(0 << 10)
+#	define R300_CRTC_MICRO_TILE_BUFFER_SINGLE	(1 << 10)
+#	define R300_CRTC_MICRO_TILE_BUFFER_DOUBLE	(2 << 10)
+#	define R300_CRTC_MICRO_TILE_BUFFER_DIS		(3 << 10)
+#	define R300_CRTC_MICRO_TILE_EN_RIGHT		(1 << 12)
+#	define R300_CRTC_MICRO_TILE_EN			(1 << 13)
+#	define R300_CRTC_MACRO_TILE_EN_RIGHT		(1 << 14)
+#       define R300_CRTC_MACRO_TILE_EN                  (1 << 15)
+#       define RADEON_CRTC_TILE_EN_RIGHT                (1 << 14)
+#       define RADEON_CRTC_TILE_EN                      (1 << 15)
+#       define RADEON_CRTC_OFFSET_FLIP_CNTL             (1 << 16)
+#       define RADEON_CRTC_STEREO_OFFSET_EN             (1 << 17)
+
+#define R300_CRTC_TILE_X0_Y0	            0x0350
+#define R300_CRTC2_TILE_X0_Y0	            0x0358
+
+#define RADEON_CRTC2_OFFSET_CNTL            0x0328
+#       define RADEON_CRTC2_OFFSET_FLIP_CNTL (1 << 16)
+#       define RADEON_CRTC2_TILE_EN         (1 << 15)
+#define RADEON_CRTC_PITCH                   0x022c
+#	define RADEON_CRTC_PITCH__SHIFT		 0
+#	define RADEON_CRTC_PITCH__RIGHT_SHIFT	16
+
+#define RADEON_CRTC2_PITCH                  0x032c
+#define RADEON_CRTC_STATUS                  0x005c
+#       define RADEON_CRTC_VBLANK_SAVE      (1 <<  1)
+#       define RADEON_CRTC_VBLANK_SAVE_CLEAR  (1 <<  1)
+#define RADEON_CRTC2_STATUS                  0x03fc
+#       define RADEON_CRTC2_VBLANK_SAVE      (1 <<  1)
+#       define RADEON_CRTC2_VBLANK_SAVE_CLEAR  (1 <<  1)
+#define RADEON_CRTC_V_SYNC_STRT_WID         0x020c
+#       define RADEON_CRTC_V_SYNC_STRT        (0x7ff <<  0)
+#       define RADEON_CRTC_V_SYNC_STRT_SHIFT  0
+#       define RADEON_CRTC_V_SYNC_WID         (0x1f  << 16)
+#       define RADEON_CRTC_V_SYNC_WID_SHIFT   16
+#       define RADEON_CRTC_V_SYNC_POL         (1     << 23)
+#define RADEON_CRTC2_V_SYNC_STRT_WID        0x030c
+#       define RADEON_CRTC2_V_SYNC_STRT       (0x7ff <<  0)
+#       define RADEON_CRTC2_V_SYNC_STRT_SHIFT 0
+#       define RADEON_CRTC2_V_SYNC_WID        (0x1f  << 16)
+#       define RADEON_CRTC2_V_SYNC_WID_SHIFT  16
+#       define RADEON_CRTC2_V_SYNC_POL        (1     << 23)
+#define RADEON_CRTC_V_TOTAL_DISP            0x0208
+#       define RADEON_CRTC_V_TOTAL          (0x07ff << 0)
+#       define RADEON_CRTC_V_TOTAL_SHIFT    0
+#       define RADEON_CRTC_V_DISP           (0x07ff << 16)
+#       define RADEON_CRTC_V_DISP_SHIFT     16
+#define RADEON_CRTC2_V_TOTAL_DISP           0x0308
+#       define RADEON_CRTC2_V_TOTAL         (0x07ff << 0)
+#       define RADEON_CRTC2_V_TOTAL_SHIFT   0
+#       define RADEON_CRTC2_V_DISP          (0x07ff << 16)
+#       define RADEON_CRTC2_V_DISP_SHIFT    16
+#define RADEON_CRTC_VLINE_CRNT_VLINE        0x0210
+#       define RADEON_CRTC_CRNT_VLINE_MASK  (0x7ff << 16)
+#define RADEON_CRTC2_CRNT_FRAME             0x0314
+#define RADEON_CRTC2_GUI_TRIG_VLINE         0x0318
+#define RADEON_CRTC2_STATUS                 0x03fc
+#define RADEON_CRTC2_VLINE_CRNT_VLINE       0x0310
+#define RADEON_CRTC8_DATA                   0x03d5 /* VGA, 0x3b5 */
+#define RADEON_CRTC8_IDX                    0x03d4 /* VGA, 0x3b4 */
+#define RADEON_CUR_CLR0                     0x026c
+#define RADEON_CUR_CLR1                     0x0270
+#define RADEON_CUR_HORZ_VERT_OFF            0x0268
+#define RADEON_CUR_HORZ_VERT_POSN           0x0264
+#define RADEON_CUR_OFFSET                   0x0260
+#       define RADEON_CUR_LOCK              (1 << 31)
+#define RADEON_CUR2_CLR0                    0x036c
+#define RADEON_CUR2_CLR1                    0x0370
+#define RADEON_CUR2_HORZ_VERT_OFF           0x0368
+#define RADEON_CUR2_HORZ_VERT_POSN          0x0364
+#define RADEON_CUR2_OFFSET                  0x0360
+#       define RADEON_CUR2_LOCK             (1 << 31)
+
+#define RADEON_DAC_CNTL                     0x0058
+#       define RADEON_DAC_RANGE_CNTL        (3 <<  0)
+#       define RADEON_DAC_RANGE_CNTL_PS2    (2 <<  0)
+#       define RADEON_DAC_RANGE_CNTL_MASK   0x03
+#       define RADEON_DAC_BLANKING          (1 <<  2)
+#       define RADEON_DAC_CMP_EN            (1 <<  3)
+#       define RADEON_DAC_CMP_OUTPUT        (1 <<  7)
+#       define RADEON_DAC_8BIT_EN           (1 <<  8)
+#       define RADEON_DAC_TVO_EN            (1 << 10)
+#       define RADEON_DAC_VGA_ADR_EN        (1 << 13)
+#       define RADEON_DAC_PDWN              (1 << 15)
+#       define RADEON_DAC_MASK_ALL          (0xff << 24)
+#define RADEON_DAC_CNTL2                    0x007c
+#       define RADEON_DAC2_TV_CLK_SEL       (0 <<  1)
+#       define RADEON_DAC2_DAC_CLK_SEL      (1 <<  0)
+#       define RADEON_DAC2_DAC2_CLK_SEL     (1 <<  1)
+#       define RADEON_DAC2_PALETTE_ACC_CTL  (1 <<  5)
+#       define RADEON_DAC2_CMP_EN           (1 <<  7)
+#       define RADEON_DAC2_CMP_OUT_R        (1 <<  8)
+#       define RADEON_DAC2_CMP_OUT_G        (1 <<  9)
+#       define RADEON_DAC2_CMP_OUT_B        (1 << 10)
+#       define RADEON_DAC2_CMP_OUTPUT       (1 << 11)
+#define RADEON_DAC_EXT_CNTL                 0x0280
+#       define RADEON_DAC2_FORCE_BLANK_OFF_EN (1 << 0)
+#       define RADEON_DAC2_FORCE_DATA_EN      (1 << 1)
+#       define RADEON_DAC_FORCE_BLANK_OFF_EN  (1 << 4)
+#       define RADEON_DAC_FORCE_DATA_EN       (1 << 5)
+#       define RADEON_DAC_FORCE_DATA_SEL_MASK (3 << 6)
+#       define RADEON_DAC_FORCE_DATA_SEL_R    (0 << 6)
+#       define RADEON_DAC_FORCE_DATA_SEL_G    (1 << 6)
+#       define RADEON_DAC_FORCE_DATA_SEL_B    (2 << 6)
+#       define RADEON_DAC_FORCE_DATA_SEL_RGB  (3 << 6)
+#       define RADEON_DAC_FORCE_DATA_MASK   0x0003ff00
+#       define RADEON_DAC_FORCE_DATA_SHIFT  8
+#define RADEON_DAC_MACRO_CNTL               0x0d04
+#       define RADEON_DAC_PDWN_R            (1 << 16)
+#       define RADEON_DAC_PDWN_G            (1 << 17)
+#       define RADEON_DAC_PDWN_B            (1 << 18)
+#define RADEON_DISP_PWR_MAN                 0x0d08
+#       define RADEON_DISP_PWR_MAN_D3_CRTC_EN      (1 << 0)
+#       define RADEON_DISP_PWR_MAN_D3_CRTC2_EN     (1 << 4)
+#       define RADEON_DISP_PWR_MAN_DPMS_ON  (0 << 8)
+#       define RADEON_DISP_PWR_MAN_DPMS_STANDBY    (1 << 8)
+#       define RADEON_DISP_PWR_MAN_DPMS_SUSPEND    (2 << 8)
+#       define RADEON_DISP_PWR_MAN_DPMS_OFF (3 << 8)
+#       define RADEON_DISP_D3_RST           (1 << 16)
+#       define RADEON_DISP_D3_REG_RST       (1 << 17)
+#       define RADEON_DISP_D3_GRPH_RST      (1 << 18)
+#       define RADEON_DISP_D3_SUBPIC_RST    (1 << 19)
+#       define RADEON_DISP_D3_OV0_RST       (1 << 20)
+#       define RADEON_DISP_D1D2_GRPH_RST    (1 << 21)
+#       define RADEON_DISP_D1D2_SUBPIC_RST  (1 << 22)
+#       define RADEON_DISP_D1D2_OV0_RST     (1 << 23)
+#       define RADEON_DIG_TMDS_ENABLE_RST   (1 << 24)
+#       define RADEON_TV_ENABLE_RST         (1 << 25)
+#       define RADEON_AUTO_PWRUP_EN         (1 << 26)
+#define RADEON_TV_DAC_CNTL                  0x088c
+#       define RADEON_TV_DAC_NBLANK         (1 << 0)
+#       define RADEON_TV_DAC_NHOLD          (1 << 1)
+#       define RADEON_TV_DAC_PEDESTAL       (1 <<  2)
+#       define RADEON_TV_MONITOR_DETECT_EN  (1 <<  4)
+#       define RADEON_TV_DAC_CMPOUT         (1 <<  5)
+#       define RADEON_TV_DAC_STD_MASK       (3 <<  8)
+#       define RADEON_TV_DAC_STD_PAL        (0 <<  8)
+#       define RADEON_TV_DAC_STD_NTSC       (1 <<  8)
+#       define RADEON_TV_DAC_STD_PS2        (2 <<  8)
+#       define RADEON_TV_DAC_STD_RS343      (3 <<  8)
+#       define RADEON_TV_DAC_BGSLEEP        (1 <<  6)
+#       define RADEON_TV_DAC_BGADJ_MASK     (0xf <<  16)
+#       define RADEON_TV_DAC_BGADJ_SHIFT    16
+#       define RADEON_TV_DAC_DACADJ_MASK    (0xf <<  20)
+#       define RADEON_TV_DAC_DACADJ_SHIFT   20
+#       define RADEON_TV_DAC_RDACPD         (1 <<  24)
+#       define RADEON_TV_DAC_GDACPD         (1 <<  25)
+#       define RADEON_TV_DAC_BDACPD         (1 <<  26)
+#       define RADEON_TV_DAC_RDACDET        (1 << 29)
+#       define RADEON_TV_DAC_GDACDET        (1 << 30)
+#       define RADEON_TV_DAC_BDACDET        (1 << 31)
+#       define R420_TV_DAC_DACADJ_MASK      (0x1f <<  20)
+#       define R420_TV_DAC_RDACPD           (1 <<  25)
+#       define R420_TV_DAC_GDACPD           (1 <<  26)
+#       define R420_TV_DAC_BDACPD           (1 <<  27)
+#       define R420_TV_DAC_TVENABLE         (1 <<  28)
+#define RADEON_DISP_HW_DEBUG                0x0d14
+#       define RADEON_CRT2_DISP1_SEL        (1 <<  5)
+#define RADEON_DISP_OUTPUT_CNTL             0x0d64
+#       define RADEON_DISP_DAC_SOURCE_MASK  0x03
+#       define RADEON_DISP_DAC2_SOURCE_MASK  0x0c
+#       define RADEON_DISP_DAC_SOURCE_CRTC2 0x01
+#       define RADEON_DISP_DAC_SOURCE_RMX   0x02
+#       define RADEON_DISP_DAC_SOURCE_LTU   0x03
+#       define RADEON_DISP_DAC2_SOURCE_CRTC2 0x04
+#       define RADEON_DISP_TVDAC_SOURCE_MASK  (0x03 << 2)
+#       define RADEON_DISP_TVDAC_SOURCE_CRTC  0x0
+#       define RADEON_DISP_TVDAC_SOURCE_CRTC2 (0x01 << 2)
+#       define RADEON_DISP_TVDAC_SOURCE_RMX   (0x02 << 2)
+#       define RADEON_DISP_TVDAC_SOURCE_LTU   (0x03 << 2)
+#       define RADEON_DISP_TRANS_MATRIX_MASK  (0x03 << 4)
+#       define RADEON_DISP_TRANS_MATRIX_ALPHA_MSB (0x00 << 4)
+#       define RADEON_DISP_TRANS_MATRIX_GRAPHICS  (0x01 << 4)
+#       define RADEON_DISP_TRANS_MATRIX_VIDEO     (0x02 << 4)
+#       define RADEON_DISP_TV_SOURCE_CRTC   (1 << 16) /* crtc1 or crtc2 */
+#       define RADEON_DISP_TV_SOURCE_LTU    (0 << 16) /* linear transform unit */
+#define RADEON_DISP_TV_OUT_CNTL             0x0d6c
+#       define RADEON_DISP_TV_PATH_SRC_CRTC2 (1 << 16)
+#       define RADEON_DISP_TV_PATH_SRC_CRTC1 (0 << 16)
+#define RADEON_DAC_CRC_SIG                  0x02cc
+#define RADEON_DAC_DATA                     0x03c9 /* VGA */
+#define RADEON_DAC_MASK                     0x03c6 /* VGA */
+#define RADEON_DAC_R_INDEX                  0x03c7 /* VGA */
+#define RADEON_DAC_W_INDEX                  0x03c8 /* VGA */
+#define RADEON_DDA_CONFIG                   0x02e0
+#define RADEON_DDA_ON_OFF                   0x02e4
+#define RADEON_DEFAULT_OFFSET               0x16e0
+#define RADEON_DEFAULT_PITCH                0x16e4
+#define RADEON_DEFAULT_SC_BOTTOM_RIGHT      0x16e8
+#       define RADEON_DEFAULT_SC_RIGHT_MAX  (0x1fff <<  0)
+#       define RADEON_DEFAULT_SC_BOTTOM_MAX (0x1fff << 16)
+#define RADEON_DESTINATION_3D_CLR_CMP_VAL   0x1820
+#define RADEON_DESTINATION_3D_CLR_CMP_MSK   0x1824
+#define RADEON_DEVICE_ID                    0x0f02 /* PCI */
+#define RADEON_DISP_MISC_CNTL               0x0d00
+#       define RADEON_SOFT_RESET_GRPH_PP    (1 << 0)
+#define RADEON_DISP_MERGE_CNTL		  0x0d60
+#       define RADEON_DISP_ALPHA_MODE_MASK  0x03
+#       define RADEON_DISP_ALPHA_MODE_KEY   0
+#       define RADEON_DISP_ALPHA_MODE_PER_PIXEL 1
+#       define RADEON_DISP_ALPHA_MODE_GLOBAL 2
+#       define RADEON_DISP_RGB_OFFSET_EN    (1 << 8)
+#       define RADEON_DISP_GRPH_ALPHA_MASK  (0xff << 16)
+#       define RADEON_DISP_OV0_ALPHA_MASK   (0xff << 24)
+#	define RADEON_DISP_LIN_TRANS_BYPASS (0x01 << 9)
+#define RADEON_DISP2_MERGE_CNTL		    0x0d68
+#       define RADEON_DISP2_RGB_OFFSET_EN   (1 << 8)
+#define RADEON_DISP_LIN_TRANS_GRPH_A        0x0d80
+#define RADEON_DISP_LIN_TRANS_GRPH_B        0x0d84
+#define RADEON_DISP_LIN_TRANS_GRPH_C        0x0d88
+#define RADEON_DISP_LIN_TRANS_GRPH_D        0x0d8c
+#define RADEON_DISP_LIN_TRANS_GRPH_E        0x0d90
+#define RADEON_DISP_LIN_TRANS_GRPH_F        0x0d98
+#define RADEON_DP_BRUSH_BKGD_CLR            0x1478
+#define RADEON_DP_BRUSH_FRGD_CLR            0x147c
+#define RADEON_DP_CNTL                      0x16c0
+#       define RADEON_DST_X_LEFT_TO_RIGHT   (1 <<  0)
+#       define RADEON_DST_Y_TOP_TO_BOTTOM   (1 <<  1)
+#       define RADEON_DP_DST_TILE_LINEAR    (0 <<  3)
+#       define RADEON_DP_DST_TILE_MACRO     (1 <<  3)
+#       define RADEON_DP_DST_TILE_MICRO     (2 <<  3)
+#       define RADEON_DP_DST_TILE_BOTH      (3 <<  3)
+#define RADEON_DP_CNTL_XDIR_YDIR_YMAJOR     0x16d0
+#       define RADEON_DST_Y_MAJOR             (1 <<  2)
+#       define RADEON_DST_Y_DIR_TOP_TO_BOTTOM (1 << 15)
+#       define RADEON_DST_X_DIR_LEFT_TO_RIGHT (1 << 31)
+#define RADEON_DP_DATATYPE                  0x16c4
+#       define RADEON_HOST_BIG_ENDIAN_EN    (1 << 29)
+#define RADEON_DP_GUI_MASTER_CNTL           0x146c
+#       define RADEON_GMC_SRC_PITCH_OFFSET_CNTL   (1    <<  0)
+#       define RADEON_GMC_DST_PITCH_OFFSET_CNTL   (1    <<  1)
+#       define RADEON_GMC_SRC_CLIPPING            (1    <<  2)
+#       define RADEON_GMC_DST_CLIPPING            (1    <<  3)
+#       define RADEON_GMC_BRUSH_DATATYPE_MASK     (0x0f <<  4)
+#       define RADEON_GMC_BRUSH_8X8_MONO_FG_BG    (0    <<  4)
+#       define RADEON_GMC_BRUSH_8X8_MONO_FG_LA    (1    <<  4)
+#       define RADEON_GMC_BRUSH_1X8_MONO_FG_BG    (4    <<  4)
+#       define RADEON_GMC_BRUSH_1X8_MONO_FG_LA    (5    <<  4)
+#       define RADEON_GMC_BRUSH_32x1_MONO_FG_BG   (6    <<  4)
+#       define RADEON_GMC_BRUSH_32x1_MONO_FG_LA   (7    <<  4)
+#       define RADEON_GMC_BRUSH_32x32_MONO_FG_BG  (8    <<  4)
+#       define RADEON_GMC_BRUSH_32x32_MONO_FG_LA  (9    <<  4)
+#       define RADEON_GMC_BRUSH_8x8_COLOR         (10   <<  4)
+#       define RADEON_GMC_BRUSH_1X8_COLOR         (12   <<  4)
+#       define RADEON_GMC_BRUSH_SOLID_COLOR       (13   <<  4)
+#       define RADEON_GMC_BRUSH_NONE              (15   <<  4)
+#       define RADEON_GMC_DST_8BPP_CI             (2    <<  8)
+#       define RADEON_GMC_DST_15BPP               (3    <<  8)
+#       define RADEON_GMC_DST_16BPP               (4    <<  8)
+#       define RADEON_GMC_DST_24BPP               (5    <<  8)
+#       define RADEON_GMC_DST_32BPP               (6    <<  8)
+#       define RADEON_GMC_DST_8BPP_RGB            (7    <<  8)
+#       define RADEON_GMC_DST_Y8                  (8    <<  8)
+#       define RADEON_GMC_DST_RGB8                (9    <<  8)
+#       define RADEON_GMC_DST_VYUY                (11   <<  8)
+#       define RADEON_GMC_DST_YVYU                (12   <<  8)
+#       define RADEON_GMC_DST_AYUV444             (14   <<  8)
+#       define RADEON_GMC_DST_ARGB4444            (15   <<  8)
+#       define RADEON_GMC_DST_DATATYPE_MASK       (0x0f <<  8)
+#       define RADEON_GMC_DST_DATATYPE_SHIFT      8
+#       define RADEON_GMC_SRC_DATATYPE_MASK       (3    << 12)
+#       define RADEON_GMC_SRC_DATATYPE_MONO_FG_BG (0    << 12)
+#       define RADEON_GMC_SRC_DATATYPE_MONO_FG_LA (1    << 12)
+#       define RADEON_GMC_SRC_DATATYPE_COLOR      (3    << 12)
+#       define RADEON_GMC_BYTE_PIX_ORDER          (1    << 14)
+#       define RADEON_GMC_BYTE_MSB_TO_LSB         (0    << 14)
+#       define RADEON_GMC_BYTE_LSB_TO_MSB         (1    << 14)
+#       define RADEON_GMC_CONVERSION_TEMP         (1    << 15)
+#       define RADEON_GMC_CONVERSION_TEMP_6500    (0    << 15)
+#       define RADEON_GMC_CONVERSION_TEMP_9300    (1    << 15)
+#       define RADEON_GMC_ROP3_MASK               (0xff << 16)
+#       define RADEON_DP_SRC_SOURCE_MASK          (7    << 24)
+#       define RADEON_DP_SRC_SOURCE_MEMORY        (2    << 24)
+#       define RADEON_DP_SRC_SOURCE_HOST_DATA     (3    << 24)
+#       define RADEON_GMC_3D_FCN_EN               (1    << 27)
+#       define RADEON_GMC_CLR_CMP_CNTL_DIS        (1    << 28)
+#       define RADEON_GMC_AUX_CLIP_DIS            (1    << 29)
+#       define RADEON_GMC_WR_MSK_DIS              (1    << 30)
+#       define RADEON_GMC_LD_BRUSH_Y_X            (1    << 31)
+#       define RADEON_ROP3_ZERO             0x00000000
+#       define RADEON_ROP3_DSa              0x00880000
+#       define RADEON_ROP3_SDna             0x00440000
+#       define RADEON_ROP3_S                0x00cc0000
+#       define RADEON_ROP3_DSna             0x00220000
+#       define RADEON_ROP3_D                0x00aa0000
+#       define RADEON_ROP3_DSx              0x00660000
+#       define RADEON_ROP3_DSo              0x00ee0000
+#       define RADEON_ROP3_DSon             0x00110000
+#       define RADEON_ROP3_DSxn             0x00990000
+#       define RADEON_ROP3_Dn               0x00550000
+#       define RADEON_ROP3_SDno             0x00dd0000
+#       define RADEON_ROP3_Sn               0x00330000
+#       define RADEON_ROP3_DSno             0x00bb0000
+#       define RADEON_ROP3_DSan             0x00770000
+#       define RADEON_ROP3_ONE              0x00ff0000
+#       define RADEON_ROP3_DPa              0x00a00000
+#       define RADEON_ROP3_PDna             0x00500000
+#       define RADEON_ROP3_P                0x00f00000
+#       define RADEON_ROP3_DPna             0x000a0000
+#       define RADEON_ROP3_D                0x00aa0000
+#       define RADEON_ROP3_DPx              0x005a0000
+#       define RADEON_ROP3_DPo              0x00fa0000
+#       define RADEON_ROP3_DPon             0x00050000
+#       define RADEON_ROP3_PDxn             0x00a50000
+#       define RADEON_ROP3_PDno             0x00f50000
+#       define RADEON_ROP3_Pn               0x000f0000
+#       define RADEON_ROP3_DPno             0x00af0000
+#       define RADEON_ROP3_DPan             0x005f0000
+#define RADEON_DP_GUI_MASTER_CNTL_C         0x1c84
+#define RADEON_DP_MIX                       0x16c8
+#define RADEON_DP_SRC_BKGD_CLR              0x15dc
+#define RADEON_DP_SRC_FRGD_CLR              0x15d8
+#define RADEON_DP_WRITE_MASK                0x16cc
+#define RADEON_DST_BRES_DEC                 0x1630
+#define RADEON_DST_BRES_ERR                 0x1628
+#define RADEON_DST_BRES_INC                 0x162c
+#define RADEON_DST_BRES_LNTH                0x1634
+#define RADEON_DST_BRES_LNTH_SUB            0x1638
+#define RADEON_DST_HEIGHT                   0x1410
+#define RADEON_DST_HEIGHT_WIDTH             0x143c
+#define RADEON_DST_HEIGHT_WIDTH_8           0x158c
+#define RADEON_DST_HEIGHT_WIDTH_BW          0x15b4
+#define RADEON_DST_HEIGHT_Y                 0x15a0
+#define RADEON_DST_LINE_START               0x1600
+#define RADEON_DST_LINE_END                 0x1604
+#define RADEON_DST_LINE_PATCOUNT            0x1608
+#       define RADEON_BRES_CNTL_SHIFT       8
+#define RADEON_DST_OFFSET                   0x1404
+#define RADEON_DST_PITCH                    0x1408
+#define RADEON_DST_PITCH_OFFSET             0x142c
+#define RADEON_DST_PITCH_OFFSET_C           0x1c80
+#       define RADEON_PITCH_SHIFT           21
+#       define RADEON_DST_TILE_LINEAR       (0 << 30)
+#       define RADEON_DST_TILE_MACRO        (1 << 30)
+#       define RADEON_DST_TILE_MICRO        (2 << 30)
+#       define RADEON_DST_TILE_BOTH         (3 << 30)
+#define RADEON_DST_WIDTH                    0x140c
+#define RADEON_DST_WIDTH_HEIGHT             0x1598
+#define RADEON_DST_WIDTH_X                  0x1588
+#define RADEON_DST_WIDTH_X_INCY             0x159c
+#define RADEON_DST_X                        0x141c
+#define RADEON_DST_X_SUB                    0x15a4
+#define RADEON_DST_X_Y                      0x1594
+#define RADEON_DST_Y                        0x1420
+#define RADEON_DST_Y_SUB                    0x15a8
+#define RADEON_DST_Y_X                      0x1438
+
+#define RADEON_FCP_CNTL                     0x0910
+#      define RADEON_FCP0_SRC_PCICLK             0
+#      define RADEON_FCP0_SRC_PCLK               1
+#      define RADEON_FCP0_SRC_PCLKb              2
+#      define RADEON_FCP0_SRC_HREF               3
+#      define RADEON_FCP0_SRC_GND                4
+#      define RADEON_FCP0_SRC_HREFb              5
+#define RADEON_FLUSH_1                      0x1704
+#define RADEON_FLUSH_2                      0x1708
+#define RADEON_FLUSH_3                      0x170c
+#define RADEON_FLUSH_4                      0x1710
+#define RADEON_FLUSH_5                      0x1714
+#define RADEON_FLUSH_6                      0x1718
+#define RADEON_FLUSH_7                      0x171c
+#define RADEON_FOG_3D_TABLE_START           0x1810
+#define RADEON_FOG_3D_TABLE_END             0x1814
+#define RADEON_FOG_3D_TABLE_DENSITY         0x181c
+#define RADEON_FOG_TABLE_INDEX              0x1a14
+#define RADEON_FOG_TABLE_DATA               0x1a18
+#define RADEON_FP_CRTC_H_TOTAL_DISP         0x0250
+#define RADEON_FP_CRTC_V_TOTAL_DISP         0x0254
+#       define RADEON_FP_CRTC_H_TOTAL_MASK      0x000003ff
+#       define RADEON_FP_CRTC_H_DISP_MASK       0x01ff0000
+#       define RADEON_FP_CRTC_V_TOTAL_MASK      0x00000fff
+#       define RADEON_FP_CRTC_V_DISP_MASK       0x0fff0000
+#       define RADEON_FP_H_SYNC_STRT_CHAR_MASK  0x00001ff8
+#       define RADEON_FP_H_SYNC_WID_MASK        0x003f0000
+#       define RADEON_FP_V_SYNC_STRT_MASK       0x00000fff
+#       define RADEON_FP_V_SYNC_WID_MASK        0x001f0000
+#       define RADEON_FP_CRTC_H_TOTAL_SHIFT     0x00000000
+#       define RADEON_FP_CRTC_H_DISP_SHIFT      0x00000010
+#       define RADEON_FP_CRTC_V_TOTAL_SHIFT     0x00000000
+#       define RADEON_FP_CRTC_V_DISP_SHIFT      0x00000010
+#       define RADEON_FP_H_SYNC_STRT_CHAR_SHIFT 0x00000003
+#       define RADEON_FP_H_SYNC_WID_SHIFT       0x00000010
+#       define RADEON_FP_V_SYNC_STRT_SHIFT      0x00000000
+#       define RADEON_FP_V_SYNC_WID_SHIFT       0x00000010
+#define RADEON_FP_GEN_CNTL                  0x0284
+#       define RADEON_FP_FPON                  (1 <<  0)
+#       define RADEON_FP_BLANK_EN              (1 <<  1)
+#       define RADEON_FP_TMDS_EN               (1 <<  2)
+#       define RADEON_FP_PANEL_FORMAT          (1 <<  3)
+#       define RADEON_FP_EN_TMDS               (1 <<  7)
+#       define RADEON_FP_DETECT_SENSE          (1 <<  8)
+#       define R200_FP_SOURCE_SEL_MASK         (3 <<  10)
+#       define R200_FP_SOURCE_SEL_CRTC1        (0 <<  10)
+#       define R200_FP_SOURCE_SEL_CRTC2        (1 <<  10)
+#       define R200_FP_SOURCE_SEL_RMX          (2 <<  10)
+#       define R200_FP_SOURCE_SEL_TRANS        (3 <<  10)
+#       define RADEON_FP_SEL_CRTC1             (0 << 13)
+#       define RADEON_FP_SEL_CRTC2             (1 << 13)
+#       define RADEON_FP_CRTC_DONT_SHADOW_HPAR (1 << 15)
+#       define RADEON_FP_CRTC_DONT_SHADOW_VPAR (1 << 16)
+#       define RADEON_FP_CRTC_DONT_SHADOW_HEND (1 << 17)
+#       define RADEON_FP_CRTC_USE_SHADOW_VEND  (1 << 18)
+#       define RADEON_FP_RMX_HVSYNC_CONTROL_EN (1 << 20)
+#       define RADEON_FP_DFP_SYNC_SEL          (1 << 21)
+#       define RADEON_FP_CRTC_LOCK_8DOT        (1 << 22)
+#       define RADEON_FP_CRT_SYNC_SEL          (1 << 23)
+#       define RADEON_FP_USE_SHADOW_EN         (1 << 24)
+#       define RADEON_FP_CRT_SYNC_ALT          (1 << 26)
+#define RADEON_FP2_GEN_CNTL                 0x0288
+#       define RADEON_FP2_BLANK_EN             (1 <<  1)
+#       define RADEON_FP2_ON                   (1 <<  2)
+#       define RADEON_FP2_PANEL_FORMAT         (1 <<  3)
+#       define RADEON_FP2_DETECT_SENSE         (1 <<  8)
+#       define R200_FP2_SOURCE_SEL_MASK        (3 << 10)
+#       define R200_FP2_SOURCE_SEL_CRTC1       (0 << 10)
+#       define R200_FP2_SOURCE_SEL_CRTC2       (1 << 10)
+#       define R200_FP2_SOURCE_SEL_RMX         (2 << 10)
+#       define R200_FP2_SOURCE_SEL_TRANS_UNIT  (3 << 10)
+#       define RADEON_FP2_SRC_SEL_MASK         (3 << 13)
+#       define RADEON_FP2_SRC_SEL_CRTC2        (1 << 13)
+#       define RADEON_FP2_FP_POL               (1 << 16)
+#       define RADEON_FP2_LP_POL               (1 << 17)
+#       define RADEON_FP2_SCK_POL              (1 << 18)
+#       define RADEON_FP2_LCD_CNTL_MASK        (7 << 19)
+#       define RADEON_FP2_PAD_FLOP_EN          (1 << 22)
+#       define RADEON_FP2_CRC_EN               (1 << 23)
+#       define RADEON_FP2_CRC_READ_EN          (1 << 24)
+#       define RADEON_FP2_DVO_EN               (1 << 25)
+#       define RADEON_FP2_DVO_RATE_SEL_SDR     (1 << 26)
+#       define R200_FP2_DVO_RATE_SEL_SDR       (1 << 27)
+#       define R300_FP2_DVO_CLOCK_MODE_SINGLE  (1 << 28)
+#       define R300_FP2_DVO_DUAL_CHANNEL_EN    (1 << 29)
+#define RADEON_FP_H_SYNC_STRT_WID           0x02c4
+#define RADEON_FP_H2_SYNC_STRT_WID          0x03c4
+#define RADEON_FP_HORZ_STRETCH              0x028c
+#define RADEON_FP_HORZ2_STRETCH             0x038c
+#       define RADEON_HORZ_STRETCH_RATIO_MASK 0xffff
+#       define RADEON_HORZ_STRETCH_RATIO_MAX  4096
+#       define RADEON_HORZ_PANEL_SIZE         (0x1ff   << 16)
+#       define RADEON_HORZ_PANEL_SHIFT        16
+#       define RADEON_HORZ_STRETCH_PIXREP     (0      << 25)
+#       define RADEON_HORZ_STRETCH_BLEND      (1      << 26)
+#       define RADEON_HORZ_STRETCH_ENABLE     (1      << 25)
+#       define RADEON_HORZ_AUTO_RATIO         (1      << 27)
+#       define RADEON_HORZ_FP_LOOP_STRETCH    (0x7    << 28)
+#       define RADEON_HORZ_AUTO_RATIO_INC     (1      << 31)
+#define RADEON_FP_HORZ_VERT_ACTIVE          0x0278
+#define RADEON_FP_V_SYNC_STRT_WID           0x02c8
+#define RADEON_FP_VERT_STRETCH              0x0290
+#define RADEON_FP_V2_SYNC_STRT_WID          0x03c8
+#define RADEON_FP_VERT2_STRETCH             0x0390
+#       define RADEON_VERT_PANEL_SIZE          (0xfff << 12)
+#       define RADEON_VERT_PANEL_SHIFT         12
+#       define RADEON_VERT_STRETCH_RATIO_MASK  0xfff
+#       define RADEON_VERT_STRETCH_RATIO_SHIFT 0
+#       define RADEON_VERT_STRETCH_RATIO_MAX   4096
+#       define RADEON_VERT_STRETCH_ENABLE      (1     << 25)
+#       define RADEON_VERT_STRETCH_LINEREP     (0     << 26)
+#       define RADEON_VERT_STRETCH_BLEND       (1     << 26)
+#       define RADEON_VERT_AUTO_RATIO_EN       (1     << 27)
+#	define RADEON_VERT_AUTO_RATIO_INC      (1     << 31)
+#       define RADEON_VERT_STRETCH_RESERVED    0x71000000
+#define RS400_FP_2ND_GEN_CNTL               0x0384
+#       define RS400_FP_2ND_ON              (1 << 0)
+#       define RS400_FP_2ND_BLANK_EN        (1 << 1)
+#       define RS400_TMDS_2ND_EN            (1 << 2)
+#       define RS400_PANEL_FORMAT_2ND       (1 << 3)
+#       define RS400_FP_2ND_EN_TMDS         (1 << 7)
+#       define RS400_FP_2ND_DETECT_SENSE    (1 << 8)
+#       define RS400_FP_2ND_SOURCE_SEL_MASK        (3 << 10)
+#       define RS400_FP_2ND_SOURCE_SEL_CRTC1       (0 << 10)
+#       define RS400_FP_2ND_SOURCE_SEL_CRTC2       (1 << 10)
+#       define RS400_FP_2ND_SOURCE_SEL_RMX         (2 << 10)
+#       define RS400_FP_2ND_DETECT_EN       (1 << 12)
+#       define RS400_HPD_2ND_SEL            (1 << 13)
+#define RS400_FP2_2_GEN_CNTL                0x0388
+#       define RS400_FP2_2_BLANK_EN         (1 << 1)
+#       define RS400_FP2_2_ON               (1 << 2)
+#       define RS400_FP2_2_PANEL_FORMAT     (1 << 3)
+#       define RS400_FP2_2_DETECT_SENSE     (1 << 8)
+#       define RS400_FP2_2_SOURCE_SEL_MASK        (3 << 10)
+#       define RS400_FP2_2_SOURCE_SEL_CRTC1       (0 << 10)
+#       define RS400_FP2_2_SOURCE_SEL_CRTC2       (1 << 10)
+#       define RS400_FP2_2_SOURCE_SEL_RMX         (2 << 10)
+#       define RS400_FP2_2_DVO2_EN          (1 << 25)
+#define RS400_TMDS2_CNTL                    0x0394
+#define RS400_TMDS2_TRANSMITTER_CNTL        0x03a4
+#       define RS400_TMDS2_PLLEN            (1 << 0)
+#       define RS400_TMDS2_PLLRST           (1 << 1)
+
+#define RADEON_GEN_INT_CNTL                 0x0040
+#	define RADEON_SW_INT_ENABLE		(1 << 25)
+#define RADEON_GEN_INT_STATUS               0x0044
+#       define RADEON_VSYNC_INT_AK          (1 <<  2)
+#       define RADEON_VSYNC_INT             (1 <<  2)
+#       define RADEON_VSYNC2_INT_AK         (1 <<  6)
+#       define RADEON_VSYNC2_INT            (1 <<  6)
+#	define RADEON_SW_INT_FIRE		(1 << 26)
+#	define RADEON_SW_INT_TEST		(1 << 25)
+#	define RADEON_SW_INT_TEST_ACK		(1 << 25)
+#define RADEON_GENENB                       0x03c3 /* VGA */
+#define RADEON_GENFC_RD                     0x03ca /* VGA */
+#define RADEON_GENFC_WT                     0x03da /* VGA, 0x03ba */
+#define RADEON_GENMO_RD                     0x03cc /* VGA */
+#define RADEON_GENMO_WT                     0x03c2 /* VGA */
+#define RADEON_GENS0                        0x03c2 /* VGA */
+#define RADEON_GENS1                        0x03da /* VGA, 0x03ba */
+#define RADEON_GPIO_MONID                   0x0068 /* DDC interface via I2C */ /* DDC3 */
+#define RADEON_GPIO_MONIDB                  0x006c
+#define RADEON_GPIO_CRT2_DDC                0x006c
+#define RADEON_GPIO_DVI_DDC                 0x0064 /* DDC2 */
+#define RADEON_GPIO_VGA_DDC                 0x0060 /* DDC1 */
+#       define RADEON_GPIO_A_0              (1 <<  0)
+#       define RADEON_GPIO_A_1              (1 <<  1)
+#       define RADEON_GPIO_Y_0              (1 <<  8)
+#       define RADEON_GPIO_Y_1              (1 <<  9)
+#       define RADEON_GPIO_Y_SHIFT_0        8
+#       define RADEON_GPIO_Y_SHIFT_1        9
+#       define RADEON_GPIO_EN_0             (1 << 16)
+#       define RADEON_GPIO_EN_1             (1 << 17)
+#       define RADEON_GPIO_MASK_0           (1 << 24) /*??*/
+#       define RADEON_GPIO_MASK_1           (1 << 25) /*??*/
+#define RADEON_GRPH8_DATA                   0x03cf /* VGA */
+#define RADEON_GRPH8_IDX                    0x03ce /* VGA */
+#define RADEON_GUI_SCRATCH_REG0             0x15e0
+#define RADEON_GUI_SCRATCH_REG1             0x15e4
+#define RADEON_GUI_SCRATCH_REG2             0x15e8
+#define RADEON_GUI_SCRATCH_REG3             0x15ec
+#define RADEON_GUI_SCRATCH_REG4             0x15f0
+#define RADEON_GUI_SCRATCH_REG5             0x15f4
+
+#define RADEON_HEADER                       0x0f0e /* PCI */
+#define RADEON_HOST_DATA0                   0x17c0
+#define RADEON_HOST_DATA1                   0x17c4
+#define RADEON_HOST_DATA2                   0x17c8
+#define RADEON_HOST_DATA3                   0x17cc
+#define RADEON_HOST_DATA4                   0x17d0
+#define RADEON_HOST_DATA5                   0x17d4
+#define RADEON_HOST_DATA6                   0x17d8
+#define RADEON_HOST_DATA7                   0x17dc
+#define RADEON_HOST_DATA_LAST               0x17e0
+#define RADEON_HOST_PATH_CNTL               0x0130
+#	define RADEON_HP_LIN_RD_CACHE_DIS   (1 << 24)
+#	define RADEON_HDP_READ_BUFFER_INVALIDATE   (1 << 27)
+#       define RADEON_HDP_SOFT_RESET        (1 << 26)
+#       define RADEON_HDP_APER_CNTL         (1 << 23)
+#define RADEON_HTOTAL_CNTL                  0x0009 /* PLL */
+#       define RADEON_HTOT_CNTL_VGA_EN      (1 << 28)
+#define RADEON_HTOTAL2_CNTL                 0x002e /* PLL */
+
+       /* Multimedia I2C bus */
+#define RADEON_I2C_CNTL_0		    0x0090
+#define RADEON_I2C_DONE (1<<0)
+#define RADEON_I2C_NACK (1<<1)
+#define RADEON_I2C_HALT (1<<2)
+#define RADEON_I2C_SOFT_RST (1<<5)
+#define RADEON_I2C_DRIVE_EN (1<<6)
+#define RADEON_I2C_DRIVE_SEL (1<<7)
+#define RADEON_I2C_START (1<<8)
+#define RADEON_I2C_STOP (1<<9)
+#define RADEON_I2C_RECEIVE (1<<10)
+#define RADEON_I2C_ABORT (1<<11)
+#define RADEON_I2C_GO (1<<12)
+#define RADEON_I2C_CNTL_1                   0x0094
+#define RADEON_I2C_SEL         (1<<16)
+#define RADEON_I2C_EN          (1<<17)
+#define RADEON_I2C_DATA			    0x0098
+
+#define RADEON_DVI_I2C_CNTL_0		    0x02e0
+#       define R200_DVI_I2C_PIN_SEL(x)      ((x) << 3)
+#       define R200_SEL_DDC1                0 /* 0x60 - VGA_DDC */
+#       define R200_SEL_DDC2                1 /* 0x64 - DVI_DDC */
+#       define R200_SEL_DDC3                2 /* 0x68 - MONID_DDC */
+#define RADEON_DVI_I2C_CNTL_1               0x02e4 /* ? */
+#define RADEON_DVI_I2C_DATA		    0x02e8
+
+#define RADEON_INTERRUPT_LINE               0x0f3c /* PCI */
+#define RADEON_INTERRUPT_PIN                0x0f3d /* PCI */
+#define RADEON_IO_BASE                      0x0f14 /* PCI */
+
+#define RADEON_LATENCY                      0x0f0d /* PCI */
+#define RADEON_LEAD_BRES_DEC                0x1608
+#define RADEON_LEAD_BRES_LNTH               0x161c
+#define RADEON_LEAD_BRES_LNTH_SUB           0x1624
+#define RADEON_LVDS_GEN_CNTL                0x02d0
+#       define RADEON_LVDS_ON               (1   <<  0)
+#       define RADEON_LVDS_DISPLAY_DIS      (1   <<  1)
+#       define RADEON_LVDS_PANEL_TYPE       (1   <<  2)
+#       define RADEON_LVDS_PANEL_FORMAT     (1   <<  3)
+#       define RADEON_LVDS_NO_FM            (0   <<  4)
+#       define RADEON_LVDS_2_GREY           (1   <<  4)
+#       define RADEON_LVDS_4_GREY           (2   <<  4)
+#       define RADEON_LVDS_RST_FM           (1   <<  6)
+#       define RADEON_LVDS_EN               (1   <<  7)
+#       define RADEON_LVDS_BL_MOD_LEVEL_SHIFT 8
+#       define RADEON_LVDS_BL_MOD_LEVEL_MASK (0xff << 8)
+#       define RADEON_LVDS_BL_MOD_EN        (1   << 16)
+#       define RADEON_LVDS_BL_CLK_SEL       (1   << 17)
+#       define RADEON_LVDS_DIGON            (1   << 18)
+#       define RADEON_LVDS_BLON             (1   << 19)
+#       define RADEON_LVDS_FP_POL_LOW       (1   << 20)
+#       define RADEON_LVDS_LP_POL_LOW       (1   << 21)
+#       define RADEON_LVDS_DTM_POL_LOW      (1   << 22)
+#       define RADEON_LVDS_SEL_CRTC2        (1   << 23)
+#       define RADEON_LVDS_FPDI_EN          (1   << 27)
+#       define RADEON_LVDS_HSYNC_DELAY_SHIFT        28
+#define RADEON_LVDS_PLL_CNTL                0x02d4
+#       define RADEON_HSYNC_DELAY_SHIFT     28
+#       define RADEON_HSYNC_DELAY_MASK      (0xf << 28)
+#       define RADEON_LVDS_PLL_EN           (1   << 16)
+#       define RADEON_LVDS_PLL_RESET        (1   << 17)
+#       define R300_LVDS_SRC_SEL_MASK       (3   << 18)
+#       define R300_LVDS_SRC_SEL_CRTC1      (0   << 18)
+#       define R300_LVDS_SRC_SEL_CRTC2      (1   << 18)
+#       define R300_LVDS_SRC_SEL_RMX        (2   << 18)
+#define RADEON_LVDS_SS_GEN_CNTL             0x02ec
+#       define RADEON_LVDS_PWRSEQ_DELAY1_SHIFT     16
+#       define RADEON_LVDS_PWRSEQ_DELAY2_SHIFT     20
+
+#define RADEON_MAX_LATENCY                  0x0f3f /* PCI */
+#define RADEON_DISPLAY_BASE_ADDR            0x23c
+#define RADEON_DISPLAY2_BASE_ADDR           0x33c
+#define RADEON_OV0_BASE_ADDR                0x43c
+#define RADEON_NB_TOM                       0x15c
+#define R300_MC_INIT_MISC_LAT_TIMER         0x180
+#       define R300_MC_DISP0R_INIT_LAT_SHIFT 8
+#       define R300_MC_DISP0R_INIT_LAT_MASK  0xf
+#       define R300_MC_DISP1R_INIT_LAT_SHIFT 12
+#       define R300_MC_DISP1R_INIT_LAT_MASK  0xf
+#define RADEON_MCLK_CNTL                    0x0012 /* PLL */
+#       define RADEON_MCLKA_SRC_SEL_MASK    0x7
+#       define RADEON_FORCEON_MCLKA         (1 << 16)
+#       define RADEON_FORCEON_MCLKB         (1 << 17)
+#       define RADEON_FORCEON_YCLKA         (1 << 18)
+#       define RADEON_FORCEON_YCLKB         (1 << 19)
+#       define RADEON_FORCEON_MC            (1 << 20)
+#       define RADEON_FORCEON_AIC           (1 << 21)
+#       define R300_DISABLE_MC_MCLKA        (1 << 21)
+#       define R300_DISABLE_MC_MCLKB        (1 << 21)
+#define RADEON_MCLK_MISC                    0x001f /* PLL */
+#       define RADEON_MC_MCLK_MAX_DYN_STOP_LAT (1 << 12)
+#       define RADEON_IO_MCLK_MAX_DYN_STOP_LAT (1 << 13)
+#       define RADEON_MC_MCLK_DYN_ENABLE    (1 << 14)
+#       define RADEON_IO_MCLK_DYN_ENABLE    (1 << 15)
+#define RADEON_LCD_GPIO_MASK                0x01a0
+#define RADEON_GPIOPAD_EN                   0x01a0
+#define RADEON_LCD_GPIO_Y_REG               0x01a4
+#define RADEON_MDGPIO_A_REG                 0x01ac
+#define RADEON_MDGPIO_EN_REG                0x01b0
+#define RADEON_MDGPIO_MASK                  0x0198
+#define RADEON_GPIOPAD_MASK                 0x0198
+#define RADEON_GPIOPAD_A		    0x019c
+#define RADEON_MDGPIO_Y_REG                 0x01b4
+#define RADEON_MEM_ADDR_CONFIG              0x0148
+#define RADEON_MEM_BASE                     0x0f10 /* PCI */
+#define RADEON_MEM_CNTL                     0x0140
+#       define RADEON_MEM_NUM_CHANNELS_MASK 0x01
+#       define RADEON_MEM_USE_B_CH_ONLY     (1 <<  1)
+#       define RV100_HALF_MODE              (1 <<  3)
+#       define R300_MEM_NUM_CHANNELS_MASK   0x03
+#       define R300_MEM_USE_CD_CH_ONLY      (1 <<  2)
+#define RADEON_MEM_TIMING_CNTL              0x0144 /* EXT_MEM_CNTL */
+#define RADEON_MEM_INIT_LAT_TIMER           0x0154
+#define RADEON_MEM_INTF_CNTL                0x014c
+#define RADEON_MEM_SDRAM_MODE_REG           0x0158
+#       define RADEON_SDRAM_MODE_MASK       0xffff0000
+#       define RADEON_B3MEM_RESET_MASK      0x6fffffff
+#       define RADEON_MEM_CFG_TYPE_DDR      (1 << 30)
+#define RADEON_MEM_STR_CNTL                 0x0150
+#       define RADEON_MEM_PWRUP_COMPL_A     (1 <<  0)
+#       define RADEON_MEM_PWRUP_COMPL_B     (1 <<  1)
+#       define R300_MEM_PWRUP_COMPL_C       (1 <<  2)
+#       define R300_MEM_PWRUP_COMPL_D       (1 <<  3)
+#       define RADEON_MEM_PWRUP_COMPLETE    0x03
+#       define R300_MEM_PWRUP_COMPLETE      0x0f
+#define RADEON_MC_STATUS                    0x0150
+#       define RADEON_MC_IDLE               (1 << 2)
+#       define R300_MC_IDLE                 (1 << 4)
+#define RADEON_MEM_VGA_RP_SEL               0x003c
+#define RADEON_MEM_VGA_WP_SEL               0x0038
+#define RADEON_MIN_GRANT                    0x0f3e /* PCI */
+#define RADEON_MM_DATA                      0x0004
+#define RADEON_MM_INDEX                     0x0000
+#	define RADEON_MM_APER		(1 << 31)
+#define RADEON_MPLL_CNTL                    0x000e /* PLL */
+#define RADEON_MPP_TB_CONFIG                0x01c0 /* ? */
+#define RADEON_MPP_GP_CONFIG                0x01c8 /* ? */
+#define RADEON_SEPROM_CNTL1                 0x01c0
+#       define RADEON_SCK_PRESCALE_SHIFT    24
+#       define RADEON_SCK_PRESCALE_MASK     (0xff << 24)
+#define R300_MC_IND_INDEX                   0x01f8
+#       define R300_MC_IND_ADDR_MASK        0x3f
+#       define R300_MC_IND_WR_EN            (1 << 8)
+#define R300_MC_IND_DATA                    0x01fc
+#define R300_MC_READ_CNTL_AB                0x017c
+#       define R300_MEM_RBS_POSITION_A_MASK 0x03
+#define R300_MC_READ_CNTL_CD_mcind	    0x24
+#       define R300_MEM_RBS_POSITION_C_MASK 0x03
+
+#define RADEON_N_VIF_COUNT                  0x0248
+
+#define RADEON_OV0_AUTO_FLIP_CNTL           0x0470
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_SOFT_BUF_NUM        0x00000007
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_SOFT_REPEAT_FIELD   0x00000008
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_SOFT_BUF_ODD        0x00000010
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_IGNORE_REPEAT_FIELD 0x00000020
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_SOFT_EOF_TOGGLE     0x00000040
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_VID_PORT_SELECT     0x00000300
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_P1_FIRST_LINE_EVEN  0x00010000
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_SHIFT_EVEN_DOWN     0x00040000
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_SHIFT_ODD_DOWN      0x00080000
+#       define  RADEON_OV0_AUTO_FLIP_CNTL_FIELD_POL_SOURCE    0x00800000
+
+#define RADEON_OV0_COLOUR_CNTL              0x04E0
+#define RADEON_OV0_DEINTERLACE_PATTERN      0x0474
+#define RADEON_OV0_EXCLUSIVE_HORZ           0x0408
+#       define  RADEON_EXCL_HORZ_START_MASK        0x000000ff
+#       define  RADEON_EXCL_HORZ_END_MASK          0x0000ff00
+#       define  RADEON_EXCL_HORZ_BACK_PORCH_MASK   0x00ff0000
+#       define  RADEON_EXCL_HORZ_EXCLUSIVE_EN      0x80000000
+#define RADEON_OV0_EXCLUSIVE_VERT           0x040C
+#       define  RADEON_EXCL_VERT_START_MASK        0x000003ff
+#       define  RADEON_EXCL_VERT_END_MASK          0x03ff0000
+#define RADEON_OV0_FILTER_CNTL              0x04A0
+#       define RADEON_FILTER_PROGRAMMABLE_COEF            0x0
+#       define RADEON_FILTER_HC_COEF_HORZ_Y               0x1
+#       define RADEON_FILTER_HC_COEF_HORZ_UV              0x2
+#       define RADEON_FILTER_HC_COEF_VERT_Y               0x4
+#       define RADEON_FILTER_HC_COEF_VERT_UV              0x8
+#       define RADEON_FILTER_HARDCODED_COEF               0xf
+#       define RADEON_FILTER_COEF_MASK                    0xf
+
+#define RADEON_OV0_FOUR_TAP_COEF_0          0x04B0
+#define RADEON_OV0_FOUR_TAP_COEF_1          0x04B4
+#define RADEON_OV0_FOUR_TAP_COEF_2          0x04B8
+#define RADEON_OV0_FOUR_TAP_COEF_3          0x04BC
+#define RADEON_OV0_FOUR_TAP_COEF_4          0x04C0
+#define RADEON_OV0_FLAG_CNTL                0x04DC
+#define RADEON_OV0_GAMMA_000_00F            0x0d40
+#define RADEON_OV0_GAMMA_010_01F            0x0d44
+#define RADEON_OV0_GAMMA_020_03F            0x0d48
+#define RADEON_OV0_GAMMA_040_07F            0x0d4c
+#define RADEON_OV0_GAMMA_080_0BF            0x0e00
+#define RADEON_OV0_GAMMA_0C0_0FF            0x0e04
+#define RADEON_OV0_GAMMA_100_13F            0x0e08
+#define RADEON_OV0_GAMMA_140_17F            0x0e0c
+#define RADEON_OV0_GAMMA_180_1BF            0x0e10
+#define RADEON_OV0_GAMMA_1C0_1FF            0x0e14
+#define RADEON_OV0_GAMMA_200_23F            0x0e18
+#define RADEON_OV0_GAMMA_240_27F            0x0e1c
+#define RADEON_OV0_GAMMA_280_2BF            0x0e20
+#define RADEON_OV0_GAMMA_2C0_2FF            0x0e24
+#define RADEON_OV0_GAMMA_300_33F            0x0e28
+#define RADEON_OV0_GAMMA_340_37F            0x0e2c
+#define RADEON_OV0_GAMMA_380_3BF            0x0d50
+#define RADEON_OV0_GAMMA_3C0_3FF            0x0d54
+#define RADEON_OV0_GRAPHICS_KEY_CLR_LOW     0x04EC
+#define RADEON_OV0_GRAPHICS_KEY_CLR_HIGH    0x04F0
+#define RADEON_OV0_H_INC                    0x0480
+#define RADEON_OV0_KEY_CNTL                 0x04F4
+#       define  RADEON_VIDEO_KEY_FN_MASK    0x00000003L
+#       define  RADEON_VIDEO_KEY_FN_FALSE   0x00000000L
+#       define  RADEON_VIDEO_KEY_FN_TRUE    0x00000001L
+#       define  RADEON_VIDEO_KEY_FN_EQ      0x00000002L
+#       define  RADEON_VIDEO_KEY_FN_NE      0x00000003L
+#       define  RADEON_GRAPHIC_KEY_FN_MASK  0x00000030L
+#       define  RADEON_GRAPHIC_KEY_FN_FALSE 0x00000000L
+#       define  RADEON_GRAPHIC_KEY_FN_TRUE  0x00000010L
+#       define  RADEON_GRAPHIC_KEY_FN_EQ    0x00000020L
+#       define  RADEON_GRAPHIC_KEY_FN_NE    0x00000030L
+#       define  RADEON_CMP_MIX_MASK         0x00000100L
+#       define  RADEON_CMP_MIX_OR           0x00000000L
+#       define  RADEON_CMP_MIX_AND          0x00000100L
+#define RADEON_OV0_LIN_TRANS_A              0x0d20
+#define RADEON_OV0_LIN_TRANS_B              0x0d24
+#define RADEON_OV0_LIN_TRANS_C              0x0d28
+#define RADEON_OV0_LIN_TRANS_D              0x0d2c
+#define RADEON_OV0_LIN_TRANS_E              0x0d30
+#define RADEON_OV0_LIN_TRANS_F              0x0d34
+#define RADEON_OV0_P1_BLANK_LINES_AT_TOP    0x0430
+#       define  RADEON_P1_BLNK_LN_AT_TOP_M1_MASK   0x00000fffL
+#       define  RADEON_P1_ACTIVE_LINES_M1          0x0fff0000L
+#define RADEON_OV0_P1_H_ACCUM_INIT          0x0488
+#define RADEON_OV0_P1_V_ACCUM_INIT          0x0428
+#       define  RADEON_OV0_P1_MAX_LN_IN_PER_LN_OUT 0x00000003L
+#       define  RADEON_OV0_P1_V_ACCUM_INIT_MASK    0x01ff8000L
+#define RADEON_OV0_P1_X_START_END           0x0494
+#define RADEON_OV0_P2_X_START_END           0x0498
+#define RADEON_OV0_P23_BLANK_LINES_AT_TOP   0x0434
+#       define  RADEON_P23_BLNK_LN_AT_TOP_M1_MASK  0x000007ffL
+#       define  RADEON_P23_ACTIVE_LINES_M1         0x07ff0000L
+#define RADEON_OV0_P23_H_ACCUM_INIT         0x048C
+#define RADEON_OV0_P23_V_ACCUM_INIT         0x042C
+#define RADEON_OV0_P3_X_START_END           0x049C
+#define RADEON_OV0_REG_LOAD_CNTL            0x0410
+#       define  RADEON_REG_LD_CTL_LOCK                 0x00000001L
+#       define  RADEON_REG_LD_CTL_VBLANK_DURING_LOCK   0x00000002L
+#       define  RADEON_REG_LD_CTL_STALL_GUI_UNTIL_FLIP 0x00000004L
+#       define  RADEON_REG_LD_CTL_LOCK_READBACK        0x00000008L
+#       define  RADEON_REG_LD_CTL_FLIP_READBACK        0x00000010L
+#define RADEON_OV0_SCALE_CNTL               0x0420
+#       define  RADEON_SCALER_HORZ_PICK_NEAREST    0x00000004L
+#       define  RADEON_SCALER_VERT_PICK_NEAREST    0x00000008L
+#       define  RADEON_SCALER_SIGNED_UV            0x00000010L
+#       define  RADEON_SCALER_GAMMA_SEL_MASK       0x00000060L
+#       define  RADEON_SCALER_GAMMA_SEL_BRIGHT     0x00000000L
+#       define  RADEON_SCALER_GAMMA_SEL_G22        0x00000020L
+#       define  RADEON_SCALER_GAMMA_SEL_G18        0x00000040L
+#       define  RADEON_SCALER_GAMMA_SEL_G14        0x00000060L
+#       define  RADEON_SCALER_COMCORE_SHIFT_UP_ONE 0x00000080L
+#       define  RADEON_SCALER_SURFAC_FORMAT        0x00000f00L
+#       define  RADEON_SCALER_SOURCE_15BPP         0x00000300L
+#       define  RADEON_SCALER_SOURCE_16BPP         0x00000400L
+#       define  RADEON_SCALER_SOURCE_32BPP         0x00000600L
+#       define  RADEON_SCALER_SOURCE_YUV9          0x00000900L
+#       define  RADEON_SCALER_SOURCE_YUV12         0x00000A00L
+#       define  RADEON_SCALER_SOURCE_VYUY422       0x00000B00L
+#       define  RADEON_SCALER_SOURCE_YVYU422       0x00000C00L
+#       define  RADEON_SCALER_ADAPTIVE_DEINT       0x00001000L
+#       define  RADEON_SCALER_TEMPORAL_DEINT       0x00002000L
+#       define  RADEON_SCALER_CRTC_SEL             0x00004000L
+#       define  RADEON_SCALER_SMART_SWITCH         0x00008000L
+#       define  RADEON_SCALER_BURST_PER_PLANE      0x007F0000L
+#       define  RADEON_SCALER_DOUBLE_BUFFER        0x01000000L
+#       define  RADEON_SCALER_DIS_LIMIT            0x08000000L
+#       define  RADEON_SCALER_LIN_TRANS_BYPASS     0x10000000L
+#       define  RADEON_SCALER_INT_EMU              0x20000000L
+#       define  RADEON_SCALER_ENABLE               0x40000000L
+#       define  RADEON_SCALER_SOFT_RESET           0x80000000L
+#define RADEON_OV0_STEP_BY                  0x0484
+#define RADEON_OV0_TEST                     0x04F8
+#define RADEON_OV0_V_INC                    0x0424
+#define RADEON_OV0_VID_BUF_PITCH0_VALUE     0x0460
+#define RADEON_OV0_VID_BUF_PITCH1_VALUE     0x0464
+#define RADEON_OV0_VID_BUF0_BASE_ADRS       0x0440
+#       define  RADEON_VIF_BUF0_PITCH_SEL          0x00000001L
+#       define  RADEON_VIF_BUF0_TILE_ADRS          0x00000002L
+#       define  RADEON_VIF_BUF0_BASE_ADRS_MASK     0x03fffff0L
+#       define  RADEON_VIF_BUF0_1ST_LINE_LSBS_MASK 0x48000000L
+#define RADEON_OV0_VID_BUF1_BASE_ADRS       0x0444
+#       define  RADEON_VIF_BUF1_PITCH_SEL          0x00000001L
+#       define  RADEON_VIF_BUF1_TILE_ADRS          0x00000002L
+#       define  RADEON_VIF_BUF1_BASE_ADRS_MASK     0x03fffff0L
+#       define  RADEON_VIF_BUF1_1ST_LINE_LSBS_MASK 0x48000000L
+#define RADEON_OV0_VID_BUF2_BASE_ADRS       0x0448
+#       define  RADEON_VIF_BUF2_PITCH_SEL          0x00000001L
+#       define  RADEON_VIF_BUF2_TILE_ADRS          0x00000002L
+#       define  RADEON_VIF_BUF2_BASE_ADRS_MASK     0x03fffff0L
+#       define  RADEON_VIF_BUF2_1ST_LINE_LSBS_MASK 0x48000000L
+#define RADEON_OV0_VID_BUF3_BASE_ADRS       0x044C
+#define RADEON_OV0_VID_BUF4_BASE_ADRS       0x0450
+#define RADEON_OV0_VID_BUF5_BASE_ADRS       0x0454
+#define RADEON_OV0_VIDEO_KEY_CLR_HIGH       0x04E8
+#define RADEON_OV0_VIDEO_KEY_CLR_LOW        0x04E4
+#define RADEON_OV0_Y_X_START                0x0400
+#define RADEON_OV0_Y_X_END                  0x0404
+#define RADEON_OV1_Y_X_START                0x0600
+#define RADEON_OV1_Y_X_END                  0x0604
+#define RADEON_OVR_CLR                      0x0230
+#define RADEON_OVR_WID_LEFT_RIGHT           0x0234
+#define RADEON_OVR_WID_TOP_BOTTOM           0x0238
+
+/* first capture unit */
+
+#define RADEON_CAP0_BUF0_OFFSET           0x0920
+#define RADEON_CAP0_BUF1_OFFSET           0x0924
+#define RADEON_CAP0_BUF0_EVEN_OFFSET      0x0928
+#define RADEON_CAP0_BUF1_EVEN_OFFSET      0x092C
+
+#define RADEON_CAP0_BUF_PITCH             0x0930
+#define RADEON_CAP0_V_WINDOW              0x0934
+#define RADEON_CAP0_H_WINDOW              0x0938
+#define RADEON_CAP0_VBI0_OFFSET           0x093C
+#define RADEON_CAP0_VBI1_OFFSET           0x0940
+#define RADEON_CAP0_VBI_V_WINDOW          0x0944
+#define RADEON_CAP0_VBI_H_WINDOW          0x0948
+#define RADEON_CAP0_PORT_MODE_CNTL        0x094C
+#define RADEON_CAP0_TRIG_CNTL             0x0950
+#define RADEON_CAP0_DEBUG                 0x0954
+#define RADEON_CAP0_CONFIG                0x0958
+#       define RADEON_CAP0_CONFIG_CONTINUOS          0x00000001
+#       define RADEON_CAP0_CONFIG_START_FIELD_EVEN   0x00000002
+#       define RADEON_CAP0_CONFIG_START_BUF_GET      0x00000004
+#       define RADEON_CAP0_CONFIG_START_BUF_SET      0x00000008
+#       define RADEON_CAP0_CONFIG_BUF_TYPE_ALT       0x00000010
+#       define RADEON_CAP0_CONFIG_BUF_TYPE_FRAME     0x00000020
+#       define RADEON_CAP0_CONFIG_ONESHOT_MODE_FRAME 0x00000040
+#       define RADEON_CAP0_CONFIG_BUF_MODE_DOUBLE    0x00000080
+#       define RADEON_CAP0_CONFIG_BUF_MODE_TRIPLE    0x00000100
+#       define RADEON_CAP0_CONFIG_MIRROR_EN          0x00000200
+#       define RADEON_CAP0_CONFIG_ONESHOT_MIRROR_EN  0x00000400
+#       define RADEON_CAP0_CONFIG_VIDEO_SIGNED_UV    0x00000800
+#       define RADEON_CAP0_CONFIG_ANC_DECODE_EN      0x00001000
+#       define RADEON_CAP0_CONFIG_VBI_EN             0x00002000
+#       define RADEON_CAP0_CONFIG_SOFT_PULL_DOWN_EN  0x00004000
+#       define RADEON_CAP0_CONFIG_VIP_EXTEND_FLAG_EN 0x00008000
+#       define RADEON_CAP0_CONFIG_FAKE_FIELD_EN      0x00010000
+#       define RADEON_CAP0_CONFIG_ODD_ONE_MORE_LINE  0x00020000
+#       define RADEON_CAP0_CONFIG_EVEN_ONE_MORE_LINE 0x00040000
+#       define RADEON_CAP0_CONFIG_HORZ_DIVIDE_2      0x00080000
+#       define RADEON_CAP0_CONFIG_HORZ_DIVIDE_4      0x00100000
+#       define RADEON_CAP0_CONFIG_VERT_DIVIDE_2      0x00200000
+#       define RADEON_CAP0_CONFIG_VERT_DIVIDE_4      0x00400000
+#       define RADEON_CAP0_CONFIG_FORMAT_BROOKTREE   0x00000000
+#       define RADEON_CAP0_CONFIG_FORMAT_CCIR656     0x00800000
+#       define RADEON_CAP0_CONFIG_FORMAT_ZV          0x01000000
+#       define RADEON_CAP0_CONFIG_FORMAT_VIP         0x01800000
+#       define RADEON_CAP0_CONFIG_FORMAT_TRANSPORT   0x02000000
+#       define RADEON_CAP0_CONFIG_HORZ_DECIMATOR     0x04000000
+#       define RADEON_CAP0_CONFIG_VIDEO_IN_YVYU422   0x00000000
+#       define RADEON_CAP0_CONFIG_VIDEO_IN_VYUY422   0x20000000
+#       define RADEON_CAP0_CONFIG_VBI_DIVIDE_2       0x40000000
+#       define RADEON_CAP0_CONFIG_VBI_DIVIDE_4       0x80000000
+#define RADEON_CAP0_ANC_ODD_OFFSET        0x095C
+#define RADEON_CAP0_ANC_EVEN_OFFSET       0x0960
+#define RADEON_CAP0_ANC_H_WINDOW          0x0964
+#define RADEON_CAP0_VIDEO_SYNC_TEST       0x0968
+#define RADEON_CAP0_ONESHOT_BUF_OFFSET    0x096C
+#define RADEON_CAP0_BUF_STATUS            0x0970
+/* #define RADEON_CAP0_DWNSC_XRATIO       0x0978 */
+/* #define RADEON_CAP0_XSHARPNESS                 0x097C */
+#define RADEON_CAP0_VBI2_OFFSET           0x0980
+#define RADEON_CAP0_VBI3_OFFSET           0x0984
+#define RADEON_CAP0_ANC2_OFFSET           0x0988
+#define RADEON_CAP0_ANC3_OFFSET           0x098C
+#define RADEON_VID_BUFFER_CONTROL         0x0900
+
+/* second capture unit */
+
+#define RADEON_CAP1_BUF0_OFFSET           0x0990
+#define RADEON_CAP1_BUF1_OFFSET           0x0994
+#define RADEON_CAP1_BUF0_EVEN_OFFSET      0x0998
+#define RADEON_CAP1_BUF1_EVEN_OFFSET      0x099C
+
+#define RADEON_CAP1_BUF_PITCH             0x09A0
+#define RADEON_CAP1_V_WINDOW              0x09A4
+#define RADEON_CAP1_H_WINDOW              0x09A8
+#define RADEON_CAP1_VBI_ODD_OFFSET        0x09AC
+#define RADEON_CAP1_VBI_EVEN_OFFSET       0x09B0
+#define RADEON_CAP1_VBI_V_WINDOW                  0x09B4
+#define RADEON_CAP1_VBI_H_WINDOW                  0x09B8
+#define RADEON_CAP1_PORT_MODE_CNTL        0x09BC
+#define RADEON_CAP1_TRIG_CNTL             0x09C0
+#define RADEON_CAP1_DEBUG                         0x09C4
+#define RADEON_CAP1_CONFIG                0x09C8
+#define RADEON_CAP1_ANC_ODD_OFFSET        0x09CC
+#define RADEON_CAP1_ANC_EVEN_OFFSET       0x09D0
+#define RADEON_CAP1_ANC_H_WINDOW                  0x09D4
+#define RADEON_CAP1_VIDEO_SYNC_TEST       0x09D8
+#define RADEON_CAP1_ONESHOT_BUF_OFFSET    0x09DC
+#define RADEON_CAP1_BUF_STATUS            0x09E0
+#define RADEON_CAP1_DWNSC_XRATIO                  0x09E8
+#define RADEON_CAP1_XSHARPNESS            0x09EC
+
+/* misc multimedia registers */
+
+#define RADEON_IDCT_RUNS                  0x1F80
+#define RADEON_IDCT_LEVELS                0x1F84
+#define RADEON_IDCT_CONTROL               0x1FBC
+#define RADEON_IDCT_AUTH_CONTROL          0x1F88
+#define RADEON_IDCT_AUTH                  0x1F8C
+
+#define RADEON_P2PLL_CNTL                   0x002a /* P2PLL */
+#       define RADEON_P2PLL_RESET                (1 <<  0)
+#       define RADEON_P2PLL_SLEEP                (1 <<  1)
+#       define RADEON_P2PLL_PVG_MASK             (7 << 11)
+#       define RADEON_P2PLL_PVG_SHIFT            11
+#       define RADEON_P2PLL_ATOMIC_UPDATE_EN     (1 << 16)
+#       define RADEON_P2PLL_VGA_ATOMIC_UPDATE_EN (1 << 17)
+#       define RADEON_P2PLL_ATOMIC_UPDATE_VSYNC  (1 << 18)
+#define RADEON_P2PLL_DIV_0                  0x002c
+#       define RADEON_P2PLL_FB0_DIV_MASK    0x07ff
+#       define RADEON_P2PLL_POST0_DIV_MASK  0x00070000
+#define RADEON_P2PLL_REF_DIV                0x002B /* PLL */
+#       define RADEON_P2PLL_REF_DIV_MASK    0x03ff
+#       define RADEON_P2PLL_ATOMIC_UPDATE_R (1 << 15) /* same as _W */
+#       define RADEON_P2PLL_ATOMIC_UPDATE_W (1 << 15) /* same as _R */
+#       define R300_PPLL_REF_DIV_ACC_MASK   (0x3ff << 18)
+#       define R300_PPLL_REF_DIV_ACC_SHIFT  18
+#define RADEON_PALETTE_DATA                 0x00b4
+#define RADEON_PALETTE_30_DATA              0x00b8
+#define RADEON_PALETTE_INDEX                0x00b0
+#define RADEON_PCI_GART_PAGE                0x017c
+#define RADEON_PIXCLKS_CNTL                 0x002d
+#       define RADEON_PIX2CLK_SRC_SEL_MASK     0x03
+#       define RADEON_PIX2CLK_SRC_SEL_CPUCLK   0x00
+#       define RADEON_PIX2CLK_SRC_SEL_PSCANCLK 0x01
+#       define RADEON_PIX2CLK_SRC_SEL_BYTECLK  0x02
+#       define RADEON_PIX2CLK_SRC_SEL_P2PLLCLK 0x03
+#       define RADEON_PIX2CLK_ALWAYS_ONb       (1<<6)
+#       define RADEON_PIX2CLK_DAC_ALWAYS_ONb   (1<<7)
+#       define RADEON_PIXCLK_TV_SRC_SEL        (1 << 8)
+#       define RADEON_DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb (1 << 9)
+#       define R300_DVOCLK_ALWAYS_ONb          (1 << 10)
+#       define RADEON_PIXCLK_BLEND_ALWAYS_ONb  (1 << 11)
+#       define RADEON_PIXCLK_GV_ALWAYS_ONb     (1 << 12)
+#       define RADEON_PIXCLK_DIG_TMDS_ALWAYS_ONb (1 << 13)
+#       define R300_PIXCLK_DVO_ALWAYS_ONb      (1 << 13)
+#       define RADEON_PIXCLK_LVDS_ALWAYS_ONb   (1 << 14)
+#       define RADEON_PIXCLK_TMDS_ALWAYS_ONb   (1 << 15)
+#       define R300_PIXCLK_TRANS_ALWAYS_ONb    (1 << 16)
+#       define R300_PIXCLK_TVO_ALWAYS_ONb      (1 << 17)
+#       define R300_P2G2CLK_ALWAYS_ONb         (1 << 18)
+#       define R300_P2G2CLK_DAC_ALWAYS_ONb     (1 << 19)
+#       define R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF (1 << 23)
+#define RADEON_PLANE_3D_MASK_C              0x1d44
+#define RADEON_PLL_TEST_CNTL                0x0013 /* PLL */
+#       define RADEON_PLL_MASK_READ_B          (1 << 9)
+#define RADEON_PMI_CAP_ID                   0x0f5c /* PCI */
+#define RADEON_PMI_DATA                     0x0f63 /* PCI */
+#define RADEON_PMI_NXT_CAP_PTR              0x0f5d /* PCI */
+#define RADEON_PMI_PMC_REG                  0x0f5e /* PCI */
+#define RADEON_PMI_PMCSR_REG                0x0f60 /* PCI */
+#define RADEON_PMI_REGISTER                 0x0f5c /* PCI */
+#define RADEON_PPLL_CNTL                    0x0002 /* PLL */
+#       define RADEON_PPLL_RESET                (1 <<  0)
+#       define RADEON_PPLL_SLEEP                (1 <<  1)
+#       define RADEON_PPLL_PVG_MASK             (7 << 11)
+#       define RADEON_PPLL_PVG_SHIFT            11
+#       define RADEON_PPLL_ATOMIC_UPDATE_EN     (1 << 16)
+#       define RADEON_PPLL_VGA_ATOMIC_UPDATE_EN (1 << 17)
+#       define RADEON_PPLL_ATOMIC_UPDATE_VSYNC  (1 << 18)
+#define RADEON_PPLL_DIV_0                   0x0004 /* PLL */
+#define RADEON_PPLL_DIV_1                   0x0005 /* PLL */
+#define RADEON_PPLL_DIV_2                   0x0006 /* PLL */
+#define RADEON_PPLL_DIV_3                   0x0007 /* PLL */
+#       define RADEON_PPLL_FB3_DIV_MASK     0x07ff
+#       define RADEON_PPLL_POST3_DIV_MASK   0x00070000
+#define RADEON_PPLL_REF_DIV                 0x0003 /* PLL */
+#       define RADEON_PPLL_REF_DIV_MASK     0x03ff
+#       define RADEON_PPLL_ATOMIC_UPDATE_R  (1 << 15) /* same as _W */
+#       define RADEON_PPLL_ATOMIC_UPDATE_W  (1 << 15) /* same as _R */
+#define RADEON_PWR_MNGMT_CNTL_STATUS        0x0f60 /* PCI */
+
+#define RADEON_RBBM_GUICNTL                 0x172c
+#       define RADEON_HOST_DATA_SWAP_NONE   (0 << 0)
+#       define RADEON_HOST_DATA_SWAP_16BIT  (1 << 0)
+#       define RADEON_HOST_DATA_SWAP_32BIT  (2 << 0)
+#       define RADEON_HOST_DATA_SWAP_HDW    (3 << 0)
+#define RADEON_RBBM_SOFT_RESET              0x00f0
+#       define RADEON_SOFT_RESET_CP         (1 <<  0)
+#       define RADEON_SOFT_RESET_HI         (1 <<  1)
+#       define RADEON_SOFT_RESET_SE         (1 <<  2)
+#       define RADEON_SOFT_RESET_RE         (1 <<  3)
+#       define RADEON_SOFT_RESET_PP         (1 <<  4)
+#       define RADEON_SOFT_RESET_E2         (1 <<  5)
+#       define RADEON_SOFT_RESET_RB         (1 <<  6)
+#       define RADEON_SOFT_RESET_HDP        (1 <<  7)
+#define RADEON_RBBM_STATUS                  0x0e40
+#       define RADEON_RBBM_FIFOCNT_MASK     0x007f
+#       define RADEON_RBBM_ACTIVE           (1 << 31)
+#define RADEON_RB2D_DSTCACHE_CTLSTAT        0x342c
+#       define RADEON_RB2D_DC_FLUSH         (3 << 0)
+#       define RADEON_RB2D_DC_FREE          (3 << 2)
+#       define RADEON_RB2D_DC_FLUSH_ALL     0xf
+#       define RADEON_RB2D_DC_BUSY          (1 << 31)
+#define RADEON_RB2D_DSTCACHE_MODE           0x3428
+#define RADEON_DSTCACHE_CTLSTAT             0x1714
+
+#define RADEON_RB3D_ZCACHE_MODE             0x3250
+#define RADEON_RB3D_ZCACHE_CTLSTAT          0x3254
+#       define RADEON_RB3D_ZC_FLUSH_ALL     0x5
+#define RADEON_RB3D_DSTCACHE_MODE           0x3258
+# define RADEON_RB3D_DC_CACHE_ENABLE            (0)
+# define RADEON_RB3D_DC_2D_CACHE_DISABLE        (1)
+# define RADEON_RB3D_DC_3D_CACHE_DISABLE        (2)
+# define RADEON_RB3D_DC_CACHE_DISABLE           (3)
+# define RADEON_RB3D_DC_2D_CACHE_LINESIZE_128   (1 << 2)
+# define RADEON_RB3D_DC_3D_CACHE_LINESIZE_128   (2 << 2)
+# define RADEON_RB3D_DC_2D_CACHE_AUTOFLUSH      (1 << 8)
+# define RADEON_RB3D_DC_3D_CACHE_AUTOFLUSH      (2 << 8)
+# define R200_RB3D_DC_2D_CACHE_AUTOFREE         (1 << 10)
+# define R200_RB3D_DC_3D_CACHE_AUTOFREE         (2 << 10)
+# define RADEON_RB3D_DC_FORCE_RMW               (1 << 16)
+# define RADEON_RB3D_DC_DISABLE_RI_FILL         (1 << 24)
+# define RADEON_RB3D_DC_DISABLE_RI_READ         (1 << 25)
+
+#define RADEON_RB3D_DSTCACHE_CTLSTAT            0x325C
+# define RADEON_RB3D_DC_FLUSH                   (3 << 0)
+# define RADEON_RB3D_DC_FREE                    (3 << 2)
+# define RADEON_RB3D_DC_FLUSH_ALL               0xf
+# define RADEON_RB3D_DC_BUSY                    (1 << 31)
+
+#define RADEON_REG_BASE                     0x0f18 /* PCI */
+#define RADEON_REGPROG_INF                  0x0f09 /* PCI */
+#define RADEON_REVISION_ID                  0x0f08 /* PCI */
+
+#define RADEON_SC_BOTTOM                    0x164c
+#define RADEON_SC_BOTTOM_RIGHT              0x16f0
+#define RADEON_SC_BOTTOM_RIGHT_C            0x1c8c
+#define RADEON_SC_LEFT                      0x1640
+#define RADEON_SC_RIGHT                     0x1644
+#define RADEON_SC_TOP                       0x1648
+#define RADEON_SC_TOP_LEFT                  0x16ec
+#define RADEON_SC_TOP_LEFT_C                0x1c88
+#       define RADEON_SC_SIGN_MASK_LO       0x8000
+#       define RADEON_SC_SIGN_MASK_HI       0x80000000
+#define RADEON_M_SPLL_REF_FB_DIV            0x000a /* PLL */
+#	define RADEON_M_SPLL_REF_DIV_SHIFT  0
+#	define RADEON_M_SPLL_REF_DIV_MASK   0xff
+#	define RADEON_MPLL_FB_DIV_SHIFT     8
+#	define RADEON_MPLL_FB_DIV_MASK      0xff
+#	define RADEON_SPLL_FB_DIV_SHIFT     16
+#	define RADEON_SPLL_FB_DIV_MASK      0xff
+#define RADEON_SPLL_CNTL                    0x000c /* PLL */
+#       define RADEON_SPLL_SLEEP            (1 << 0)
+#       define RADEON_SPLL_RESET            (1 << 1)
+#       define RADEON_SPLL_PCP_MASK         0x7
+#       define RADEON_SPLL_PCP_SHIFT        8
+#       define RADEON_SPLL_PVG_MASK         0x7
+#       define RADEON_SPLL_PVG_SHIFT        11
+#       define RADEON_SPLL_PDC_MASK         0x3
+#       define RADEON_SPLL_PDC_SHIFT        14
+#define RADEON_SCLK_CNTL                    0x000d /* PLL */
+#       define RADEON_SCLK_SRC_SEL_MASK     0x0007
+#       define RADEON_DYN_STOP_LAT_MASK     0x00007ff8
+#       define RADEON_CP_MAX_DYN_STOP_LAT   0x0008
+#       define RADEON_SCLK_FORCEON_MASK     0xffff8000
+#       define RADEON_SCLK_FORCE_DISP2      (1<<15)
+#       define RADEON_SCLK_FORCE_CP         (1<<16)
+#       define RADEON_SCLK_FORCE_HDP        (1<<17)
+#       define RADEON_SCLK_FORCE_DISP1      (1<<18)
+#       define RADEON_SCLK_FORCE_TOP        (1<<19)
+#       define RADEON_SCLK_FORCE_E2         (1<<20)
+#       define RADEON_SCLK_FORCE_SE         (1<<21)
+#       define RADEON_SCLK_FORCE_IDCT       (1<<22)
+#       define RADEON_SCLK_FORCE_VIP        (1<<23)
+#       define RADEON_SCLK_FORCE_RE         (1<<24)
+#       define RADEON_SCLK_FORCE_PB         (1<<25)
+#       define RADEON_SCLK_FORCE_TAM        (1<<26)
+#       define RADEON_SCLK_FORCE_TDM        (1<<27)
+#       define RADEON_SCLK_FORCE_RB         (1<<28)
+#       define RADEON_SCLK_FORCE_TV_SCLK    (1<<29)
+#       define RADEON_SCLK_FORCE_SUBPIC     (1<<30)
+#       define RADEON_SCLK_FORCE_OV0        (1<<31)
+#       define R300_SCLK_FORCE_VAP          (1<<21)
+#       define R300_SCLK_FORCE_SR           (1<<25)
+#       define R300_SCLK_FORCE_PX           (1<<26)
+#       define R300_SCLK_FORCE_TX           (1<<27)
+#       define R300_SCLK_FORCE_US           (1<<28)
+#       define R300_SCLK_FORCE_SU           (1<<30)
+#define R300_SCLK_CNTL2                     0x1e   /* PLL */
+#       define R300_SCLK_TCL_MAX_DYN_STOP_LAT (1<<10)
+#       define R300_SCLK_GA_MAX_DYN_STOP_LAT  (1<<11)
+#       define R300_SCLK_CBA_MAX_DYN_STOP_LAT (1<<12)
+#       define R300_SCLK_FORCE_TCL          (1<<13)
+#       define R300_SCLK_FORCE_CBA          (1<<14)
+#       define R300_SCLK_FORCE_GA           (1<<15)
+#define RADEON_SCLK_MORE_CNTL               0x0035 /* PLL */
+#       define RADEON_SCLK_MORE_MAX_DYN_STOP_LAT 0x0007
+#       define RADEON_SCLK_MORE_FORCEON     0x0700
+#define RADEON_SDRAM_MODE_REG               0x0158
+#define RADEON_SEQ8_DATA                    0x03c5 /* VGA */
+#define RADEON_SEQ8_IDX                     0x03c4 /* VGA */
+#define RADEON_SNAPSHOT_F_COUNT             0x0244
+#define RADEON_SNAPSHOT_VH_COUNTS           0x0240
+#define RADEON_SNAPSHOT_VIF_COUNT           0x024c
+#define RADEON_SRC_OFFSET                   0x15ac
+#define RADEON_SRC_PITCH                    0x15b0
+#define RADEON_SRC_PITCH_OFFSET             0x1428
+#define RADEON_SRC_SC_BOTTOM                0x165c
+#define RADEON_SRC_SC_BOTTOM_RIGHT          0x16f4
+#define RADEON_SRC_SC_RIGHT                 0x1654
+#define RADEON_SRC_X                        0x1414
+#define RADEON_SRC_X_Y                      0x1590
+#define RADEON_SRC_Y                        0x1418
+#define RADEON_SRC_Y_X                      0x1434
+#define RADEON_STATUS                       0x0f06 /* PCI */
+#define RADEON_SUBPIC_CNTL                  0x0540 /* ? */
+#define RADEON_SUB_CLASS                    0x0f0a /* PCI */
+#define RADEON_SURFACE_CNTL                 0x0b00
+#       define RADEON_SURF_TRANSLATION_DIS  (1 << 8)
+#       define RADEON_NONSURF_AP0_SWP_16BPP (1 << 20)
+#       define RADEON_NONSURF_AP0_SWP_32BPP (1 << 21)
+#       define RADEON_NONSURF_AP1_SWP_16BPP (1 << 22)
+#       define RADEON_NONSURF_AP1_SWP_32BPP (1 << 23)
+#define RADEON_SURFACE0_INFO                0x0b0c
+#       define RADEON_SURF_TILE_COLOR_MACRO (0 << 16)
+#       define RADEON_SURF_TILE_COLOR_BOTH  (1 << 16)
+#       define RADEON_SURF_TILE_DEPTH_32BPP (2 << 16)
+#       define RADEON_SURF_TILE_DEPTH_16BPP (3 << 16)
+#       define R200_SURF_TILE_NONE          (0 << 16)
+#       define R200_SURF_TILE_COLOR_MACRO   (1 << 16)
+#       define R200_SURF_TILE_COLOR_MICRO   (2 << 16)
+#       define R200_SURF_TILE_COLOR_BOTH    (3 << 16)
+#       define R200_SURF_TILE_DEPTH_32BPP   (4 << 16)
+#       define R200_SURF_TILE_DEPTH_16BPP   (5 << 16)
+#       define R300_SURF_TILE_NONE          (0 << 16)
+#       define R300_SURF_TILE_COLOR_MACRO   (1 << 16)
+#       define R300_SURF_TILE_DEPTH_32BPP   (2 << 16)
+#       define RADEON_SURF_AP0_SWP_16BPP    (1 << 20)
+#       define RADEON_SURF_AP0_SWP_32BPP    (1 << 21)
+#       define RADEON_SURF_AP1_SWP_16BPP    (1 << 22)
+#       define RADEON_SURF_AP1_SWP_32BPP    (1 << 23)
+#define RADEON_SURFACE0_LOWER_BOUND         0x0b04
+#define RADEON_SURFACE0_UPPER_BOUND         0x0b08
+#define RADEON_SURFACE1_INFO                0x0b1c
+#define RADEON_SURFACE1_LOWER_BOUND         0x0b14
+#define RADEON_SURFACE1_UPPER_BOUND         0x0b18
+#define RADEON_SURFACE2_INFO                0x0b2c
+#define RADEON_SURFACE2_LOWER_BOUND         0x0b24
+#define RADEON_SURFACE2_UPPER_BOUND         0x0b28
+#define RADEON_SURFACE3_INFO                0x0b3c
+#define RADEON_SURFACE3_LOWER_BOUND         0x0b34
+#define RADEON_SURFACE3_UPPER_BOUND         0x0b38
+#define RADEON_SURFACE4_INFO                0x0b4c
+#define RADEON_SURFACE4_LOWER_BOUND         0x0b44
+#define RADEON_SURFACE4_UPPER_BOUND         0x0b48
+#define RADEON_SURFACE5_INFO                0x0b5c
+#define RADEON_SURFACE5_LOWER_BOUND         0x0b54
+#define RADEON_SURFACE5_UPPER_BOUND         0x0b58
+#define RADEON_SURFACE6_INFO                0x0b6c
+#define RADEON_SURFACE6_LOWER_BOUND         0x0b64
+#define RADEON_SURFACE6_UPPER_BOUND         0x0b68
+#define RADEON_SURFACE7_INFO                0x0b7c
+#define RADEON_SURFACE7_LOWER_BOUND         0x0b74
+#define RADEON_SURFACE7_UPPER_BOUND         0x0b78
+#define RADEON_SW_SEMAPHORE                 0x013c
+
+#define RADEON_TEST_DEBUG_CNTL              0x0120
+#define RADEON_TEST_DEBUG_CNTL__TEST_DEBUG_OUT_EN 0x00000001
+
+#define RADEON_TEST_DEBUG_MUX               0x0124
+#define RADEON_TEST_DEBUG_OUT               0x012c
+#define RADEON_TMDS_PLL_CNTL                0x02a8
+#define RADEON_TMDS_TRANSMITTER_CNTL        0x02a4
+#       define RADEON_TMDS_TRANSMITTER_PLLEN  1
+#       define RADEON_TMDS_TRANSMITTER_PLLRST 2
+#define RADEON_TRAIL_BRES_DEC               0x1614
+#define RADEON_TRAIL_BRES_ERR               0x160c
+#define RADEON_TRAIL_BRES_INC               0x1610
+#define RADEON_TRAIL_X                      0x1618
+#define RADEON_TRAIL_X_SUB                  0x1620
+
+#define RADEON_VCLK_ECP_CNTL                0x0008 /* PLL */
+#       define RADEON_VCLK_SRC_SEL_MASK     0x03
+#       define RADEON_VCLK_SRC_SEL_CPUCLK   0x00
+#       define RADEON_VCLK_SRC_SEL_PSCANCLK 0x01
+#       define RADEON_VCLK_SRC_SEL_BYTECLK  0x02
+#       define RADEON_VCLK_SRC_SEL_PPLLCLK  0x03
+#       define RADEON_PIXCLK_ALWAYS_ONb     (1<<6)
+#       define RADEON_PIXCLK_DAC_ALWAYS_ONb (1<<7)
+#       define R300_DISP_DAC_PIXCLK_DAC_BLANK_OFF (1<<23)
+
+#define RADEON_VENDOR_ID                    0x0f00 /* PCI */
+#define RADEON_VGA_DDA_CONFIG               0x02e8
+#define RADEON_VGA_DDA_ON_OFF               0x02ec
+#define RADEON_VID_BUFFER_CONTROL           0x0900
+#define RADEON_VIDEOMUX_CNTL                0x0190
+
+/* VIP bus */
+#define RADEON_VIPH_CH0_DATA                0x0c00
+#define RADEON_VIPH_CH1_DATA                0x0c04
+#define RADEON_VIPH_CH2_DATA                0x0c08
+#define RADEON_VIPH_CH3_DATA                0x0c0c
+#define RADEON_VIPH_CH0_ADDR                0x0c10
+#define RADEON_VIPH_CH1_ADDR                0x0c14
+#define RADEON_VIPH_CH2_ADDR                0x0c18
+#define RADEON_VIPH_CH3_ADDR                0x0c1c
+#define RADEON_VIPH_CH0_SBCNT               0x0c20
+#define RADEON_VIPH_CH1_SBCNT               0x0c24
+#define RADEON_VIPH_CH2_SBCNT               0x0c28
+#define RADEON_VIPH_CH3_SBCNT               0x0c2c
+#define RADEON_VIPH_CH0_ABCNT               0x0c30
+#define RADEON_VIPH_CH1_ABCNT               0x0c34
+#define RADEON_VIPH_CH2_ABCNT               0x0c38
+#define RADEON_VIPH_CH3_ABCNT               0x0c3c
+#define RADEON_VIPH_CONTROL                 0x0c40
+#       define RADEON_VIP_BUSY 0
+#       define RADEON_VIP_IDLE 1
+#       define RADEON_VIP_RESET 2
+#       define RADEON_VIPH_EN               (1 << 21)
+#define RADEON_VIPH_DV_LAT                  0x0c44
+#define RADEON_VIPH_BM_CHUNK                0x0c48
+#define RADEON_VIPH_DV_INT                  0x0c4c
+#define RADEON_VIPH_TIMEOUT_STAT            0x0c50
+#define RADEON_VIPH_TIMEOUT_STAT__VIPH_REG_STAT 0x00000010
+#define RADEON_VIPH_TIMEOUT_STAT__VIPH_REG_AK   0x00000010
+#define RADEON_VIPH_TIMEOUT_STAT__VIPH_REGR_DIS 0x01000000
+
+#define RADEON_VIPH_REG_DATA                0x0084
+#define RADEON_VIPH_REG_ADDR                0x0080
+
+
+#define RADEON_WAIT_UNTIL                   0x1720
+#       define RADEON_WAIT_CRTC_PFLIP       (1 << 0)
+#       define RADEON_WAIT_RE_CRTC_VLINE    (1 << 1)
+#       define RADEON_WAIT_FE_CRTC_VLINE    (1 << 2)
+#       define RADEON_WAIT_CRTC_VLINE       (1 << 3)
+#       define RADEON_WAIT_DMA_VID_IDLE     (1 << 8)
+#       define RADEON_WAIT_DMA_GUI_IDLE     (1 << 9)
+#       define RADEON_WAIT_CMDFIFO          (1 << 10) /* wait for CMDFIFO_ENTRIES */
+#       define RADEON_WAIT_OV0_FLIP         (1 << 11)
+#       define RADEON_WAIT_AGP_FLUSH        (1 << 13)
+#       define RADEON_WAIT_2D_IDLE          (1 << 14)
+#       define RADEON_WAIT_3D_IDLE          (1 << 15)
+#       define RADEON_WAIT_2D_IDLECLEAN     (1 << 16)
+#       define RADEON_WAIT_3D_IDLECLEAN     (1 << 17)
+#       define RADEON_WAIT_HOST_IDLECLEAN   (1 << 18)
+#       define RADEON_CMDFIFO_ENTRIES_SHIFT 10
+#       define RADEON_CMDFIFO_ENTRIES_MASK  0x7f
+#       define RADEON_WAIT_VAP_IDLE         (1 << 28)
+#       define RADEON_WAIT_BOTH_CRTC_PFLIP  (1 << 30)
+#       define RADEON_ENG_DISPLAY_SELECT_CRTC0    (0 << 31)
+#       define RADEON_ENG_DISPLAY_SELECT_CRTC1    (1 << 31)
+
+#define RADEON_X_MPLL_REF_FB_DIV            0x000a /* PLL */
+#define RADEON_XCLK_CNTL                    0x000d /* PLL */
+#define RADEON_XDLL_CNTL                    0x000c /* PLL */
+#define RADEON_XPLL_CNTL                    0x000b /* PLL */
+
+
+
+				/* Registers for 3D/TCL */
+#define RADEON_PP_BORDER_COLOR_0            0x1d40
+#define RADEON_PP_BORDER_COLOR_1            0x1d44
+#define RADEON_PP_BORDER_COLOR_2            0x1d48
+#define RADEON_PP_CNTL                      0x1c38
+#       define RADEON_STIPPLE_ENABLE        (1 <<  0)
+#       define RADEON_SCISSOR_ENABLE        (1 <<  1)
+#       define RADEON_PATTERN_ENABLE        (1 <<  2)
+#       define RADEON_SHADOW_ENABLE         (1 <<  3)
+#       define RADEON_TEX_ENABLE_MASK       (0xf << 4)
+#       define RADEON_TEX_0_ENABLE          (1 <<  4)
+#       define RADEON_TEX_1_ENABLE          (1 <<  5)
+#       define RADEON_TEX_2_ENABLE          (1 <<  6)
+#       define RADEON_TEX_3_ENABLE          (1 <<  7)
+#       define RADEON_TEX_BLEND_ENABLE_MASK (0xf << 12)
+#       define RADEON_TEX_BLEND_0_ENABLE    (1 << 12)
+#       define RADEON_TEX_BLEND_1_ENABLE    (1 << 13)
+#       define RADEON_TEX_BLEND_2_ENABLE    (1 << 14)
+#       define RADEON_TEX_BLEND_3_ENABLE    (1 << 15)
+#       define RADEON_PLANAR_YUV_ENABLE     (1 << 20)
+#       define RADEON_SPECULAR_ENABLE       (1 << 21)
+#       define RADEON_FOG_ENABLE            (1 << 22)
+#       define RADEON_ALPHA_TEST_ENABLE     (1 << 23)
+#       define RADEON_ANTI_ALIAS_NONE       (0 << 24)
+#       define RADEON_ANTI_ALIAS_LINE       (1 << 24)
+#       define RADEON_ANTI_ALIAS_POLY       (2 << 24)
+#       define RADEON_ANTI_ALIAS_LINE_POLY  (3 << 24)
+#       define RADEON_BUMP_MAP_ENABLE       (1 << 26)
+#       define RADEON_BUMPED_MAP_T0         (0 << 27)
+#       define RADEON_BUMPED_MAP_T1         (1 << 27)
+#       define RADEON_BUMPED_MAP_T2         (2 << 27)
+#       define RADEON_TEX_3D_ENABLE_0       (1 << 29)
+#       define RADEON_TEX_3D_ENABLE_1       (1 << 30)
+#       define RADEON_MC_ENABLE             (1 << 31)
+#define RADEON_PP_FOG_COLOR                 0x1c18
+#       define RADEON_FOG_COLOR_MASK        0x00ffffff
+#       define RADEON_FOG_VERTEX            (0 << 24)
+#       define RADEON_FOG_TABLE             (1 << 24)
+#       define RADEON_FOG_USE_DEPTH         (0 << 25)
+#       define RADEON_FOG_USE_DIFFUSE_ALPHA (2 << 25)
+#       define RADEON_FOG_USE_SPEC_ALPHA    (3 << 25)
+#define RADEON_PP_LUM_MATRIX                0x1d00
+#define RADEON_PP_MISC                      0x1c14
+#       define RADEON_REF_ALPHA_MASK        0x000000ff
+#       define RADEON_ALPHA_TEST_FAIL       (0 << 8)
+#       define RADEON_ALPHA_TEST_LESS       (1 << 8)
+#       define RADEON_ALPHA_TEST_LEQUAL     (2 << 8)
+#       define RADEON_ALPHA_TEST_EQUAL      (3 << 8)
+#       define RADEON_ALPHA_TEST_GEQUAL     (4 << 8)
+#       define RADEON_ALPHA_TEST_GREATER    (5 << 8)
+#       define RADEON_ALPHA_TEST_NEQUAL     (6 << 8)
+#       define RADEON_ALPHA_TEST_PASS       (7 << 8)
+#       define RADEON_ALPHA_TEST_OP_MASK    (7 << 8)
+#       define RADEON_CHROMA_FUNC_FAIL      (0 << 16)
+#       define RADEON_CHROMA_FUNC_PASS      (1 << 16)
+#       define RADEON_CHROMA_FUNC_NEQUAL    (2 << 16)
+#       define RADEON_CHROMA_FUNC_EQUAL     (3 << 16)
+#       define RADEON_CHROMA_KEY_NEAREST    (0 << 18)
+#       define RADEON_CHROMA_KEY_ZERO       (1 << 18)
+#       define RADEON_SHADOW_ID_AUTO_INC    (1 << 20)
+#       define RADEON_SHADOW_FUNC_EQUAL     (0 << 21)
+#       define RADEON_SHADOW_FUNC_NEQUAL    (1 << 21)
+#       define RADEON_SHADOW_PASS_1         (0 << 22)
+#       define RADEON_SHADOW_PASS_2         (1 << 22)
+#       define RADEON_RIGHT_HAND_CUBE_D3D   (0 << 24)
+#       define RADEON_RIGHT_HAND_CUBE_OGL   (1 << 24)
+#define RADEON_PP_ROT_MATRIX_0              0x1d58
+#define RADEON_PP_ROT_MATRIX_1              0x1d5c
+#define RADEON_PP_TXFILTER_0                0x1c54
+#define RADEON_PP_TXFILTER_1                0x1c6c
+#define RADEON_PP_TXFILTER_2                0x1c84
+#       define RADEON_MAG_FILTER_NEAREST                   (0  <<  0)
+#       define RADEON_MAG_FILTER_LINEAR                    (1  <<  0)
+#       define RADEON_MAG_FILTER_MASK                      (1  <<  0)
+#       define RADEON_MIN_FILTER_NEAREST                   (0  <<  1)
+#       define RADEON_MIN_FILTER_LINEAR                    (1  <<  1)
+#       define RADEON_MIN_FILTER_NEAREST_MIP_NEAREST       (2  <<  1)
+#       define RADEON_MIN_FILTER_NEAREST_MIP_LINEAR        (3  <<  1)
+#       define RADEON_MIN_FILTER_LINEAR_MIP_NEAREST        (6  <<  1)
+#       define RADEON_MIN_FILTER_LINEAR_MIP_LINEAR         (7  <<  1)
+#       define RADEON_MIN_FILTER_ANISO_NEAREST             (8  <<  1)
+#       define RADEON_MIN_FILTER_ANISO_LINEAR              (9  <<  1)
+#       define RADEON_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST (10 <<  1)
+#       define RADEON_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR  (11 <<  1)
+#       define RADEON_MIN_FILTER_MASK                      (15 <<  1)
+#       define RADEON_MAX_ANISO_1_TO_1                     (0  <<  5)
+#       define RADEON_MAX_ANISO_2_TO_1                     (1  <<  5)
+#       define RADEON_MAX_ANISO_4_TO_1                     (2  <<  5)
+#       define RADEON_MAX_ANISO_8_TO_1                     (3  <<  5)
+#       define RADEON_MAX_ANISO_16_TO_1                    (4  <<  5)
+#       define RADEON_MAX_ANISO_MASK                       (7  <<  5)
+#       define RADEON_LOD_BIAS_MASK                        (0xff <<  8)
+#       define RADEON_LOD_BIAS_SHIFT                       8
+#       define RADEON_MAX_MIP_LEVEL_MASK                   (0x0f << 16)
+#       define RADEON_MAX_MIP_LEVEL_SHIFT                  16
+#       define RADEON_YUV_TO_RGB                           (1  << 20)
+#       define RADEON_YUV_TEMPERATURE_COOL                 (0  << 21)
+#       define RADEON_YUV_TEMPERATURE_HOT                  (1  << 21)
+#       define RADEON_YUV_TEMPERATURE_MASK                 (1  << 21)
+#       define RADEON_WRAPEN_S                             (1  << 22)
+#       define RADEON_CLAMP_S_WRAP                         (0  << 23)
+#       define RADEON_CLAMP_S_MIRROR                       (1  << 23)
+#       define RADEON_CLAMP_S_CLAMP_LAST                   (2  << 23)
+#       define RADEON_CLAMP_S_MIRROR_CLAMP_LAST            (3  << 23)
+#       define RADEON_CLAMP_S_CLAMP_BORDER                 (4  << 23)
+#       define RADEON_CLAMP_S_MIRROR_CLAMP_BORDER          (5  << 23)
+#       define RADEON_CLAMP_S_CLAMP_GL                     (6  << 23)
+#       define RADEON_CLAMP_S_MIRROR_CLAMP_GL              (7  << 23)
+#       define RADEON_CLAMP_S_MASK                         (7  << 23)
+#       define RADEON_WRAPEN_T                             (1  << 26)
+#       define RADEON_CLAMP_T_WRAP                         (0  << 27)
+#       define RADEON_CLAMP_T_MIRROR                       (1  << 27)
+#       define RADEON_CLAMP_T_CLAMP_LAST                   (2  << 27)
+#       define RADEON_CLAMP_T_MIRROR_CLAMP_LAST            (3  << 27)
+#       define RADEON_CLAMP_T_CLAMP_BORDER                 (4  << 27)
+#       define RADEON_CLAMP_T_MIRROR_CLAMP_BORDER          (5  << 27)
+#       define RADEON_CLAMP_T_CLAMP_GL                     (6  << 27)
+#       define RADEON_CLAMP_T_MIRROR_CLAMP_GL              (7  << 27)
+#       define RADEON_CLAMP_T_MASK                         (7  << 27)
+#       define RADEON_BORDER_MODE_OGL                      (0  << 31)
+#       define RADEON_BORDER_MODE_D3D                      (1  << 31)
+#define RADEON_PP_TXFORMAT_0                0x1c58
+#define RADEON_PP_TXFORMAT_1                0x1c70
+#define RADEON_PP_TXFORMAT_2                0x1c88
+#       define RADEON_TXFORMAT_I8                 (0  <<  0)
+#       define RADEON_TXFORMAT_AI88               (1  <<  0)
+#       define RADEON_TXFORMAT_RGB332             (2  <<  0)
+#       define RADEON_TXFORMAT_ARGB1555           (3  <<  0)
+#       define RADEON_TXFORMAT_RGB565             (4  <<  0)
+#       define RADEON_TXFORMAT_ARGB4444           (5  <<  0)
+#       define RADEON_TXFORMAT_ARGB8888           (6  <<  0)
+#       define RADEON_TXFORMAT_RGBA8888           (7  <<  0)
+#       define RADEON_TXFORMAT_Y8                 (8  <<  0)
+#       define RADEON_TXFORMAT_VYUY422            (10 <<  0)
+#       define RADEON_TXFORMAT_YVYU422            (11 <<  0)
+#       define RADEON_TXFORMAT_DXT1               (12 <<  0)
+#       define RADEON_TXFORMAT_DXT23              (14 <<  0)
+#       define RADEON_TXFORMAT_DXT45              (15 <<  0)
+#       define RADEON_TXFORMAT_FORMAT_MASK        (31 <<  0)
+#       define RADEON_TXFORMAT_FORMAT_SHIFT       0
+#       define RADEON_TXFORMAT_APPLE_YUV_MODE     (1  <<  5)
+#       define RADEON_TXFORMAT_ALPHA_IN_MAP       (1  <<  6)
+#       define RADEON_TXFORMAT_NON_POWER2         (1  <<  7)
+#       define RADEON_TXFORMAT_WIDTH_MASK         (15 <<  8)
+#       define RADEON_TXFORMAT_WIDTH_SHIFT        8
+#       define RADEON_TXFORMAT_HEIGHT_MASK        (15 << 12)
+#       define RADEON_TXFORMAT_HEIGHT_SHIFT       12
+#       define RADEON_TXFORMAT_F5_WIDTH_MASK      (15 << 16)
+#       define RADEON_TXFORMAT_F5_WIDTH_SHIFT     16
+#       define RADEON_TXFORMAT_F5_HEIGHT_MASK     (15 << 20)
+#       define RADEON_TXFORMAT_F5_HEIGHT_SHIFT    20
+#       define RADEON_TXFORMAT_ST_ROUTE_STQ0      (0  << 24)
+#       define RADEON_TXFORMAT_ST_ROUTE_MASK      (3  << 24)
+#       define RADEON_TXFORMAT_ST_ROUTE_STQ1      (1  << 24)
+#       define RADEON_TXFORMAT_ST_ROUTE_STQ2      (2  << 24)
+#       define RADEON_TXFORMAT_ENDIAN_NO_SWAP     (0  << 26)
+#       define RADEON_TXFORMAT_ENDIAN_16BPP_SWAP  (1  << 26)
+#       define RADEON_TXFORMAT_ENDIAN_32BPP_SWAP  (2  << 26)
+#       define RADEON_TXFORMAT_ENDIAN_HALFDW_SWAP (3  << 26)
+#       define RADEON_TXFORMAT_ALPHA_MASK_ENABLE  (1  << 28)
+#       define RADEON_TXFORMAT_CHROMA_KEY_ENABLE  (1  << 29)
+#       define RADEON_TXFORMAT_CUBIC_MAP_ENABLE   (1  << 30)
+#       define RADEON_TXFORMAT_PERSPECTIVE_ENABLE (1  << 31)
+#define RADEON_PP_CUBIC_FACES_0             0x1d24
+#define RADEON_PP_CUBIC_FACES_1             0x1d28
+#define RADEON_PP_CUBIC_FACES_2             0x1d2c
+#       define RADEON_FACE_WIDTH_1_SHIFT          0
+#       define RADEON_FACE_HEIGHT_1_SHIFT         4
+#       define RADEON_FACE_WIDTH_1_MASK           (0xf << 0)
+#       define RADEON_FACE_HEIGHT_1_MASK          (0xf << 4)
+#       define RADEON_FACE_WIDTH_2_SHIFT          8
+#       define RADEON_FACE_HEIGHT_2_SHIFT         12
+#       define RADEON_FACE_WIDTH_2_MASK           (0xf << 8)
+#       define RADEON_FACE_HEIGHT_2_MASK          (0xf << 12)
+#       define RADEON_FACE_WIDTH_3_SHIFT          16
+#       define RADEON_FACE_HEIGHT_3_SHIFT         20
+#       define RADEON_FACE_WIDTH_3_MASK           (0xf << 16)
+#       define RADEON_FACE_HEIGHT_3_MASK          (0xf << 20)
+#       define RADEON_FACE_WIDTH_4_SHIFT          24
+#       define RADEON_FACE_HEIGHT_4_SHIFT         28
+#       define RADEON_FACE_WIDTH_4_MASK           (0xf << 24)
+#       define RADEON_FACE_HEIGHT_4_MASK          (0xf << 28)
+
+#define RADEON_PP_TXOFFSET_0                0x1c5c
+#define RADEON_PP_TXOFFSET_1                0x1c74
+#define RADEON_PP_TXOFFSET_2                0x1c8c
+#       define RADEON_TXO_ENDIAN_NO_SWAP     (0 << 0)
+#       define RADEON_TXO_ENDIAN_BYTE_SWAP   (1 << 0)
+#       define RADEON_TXO_ENDIAN_WORD_SWAP   (2 << 0)
+#       define RADEON_TXO_ENDIAN_HALFDW_SWAP (3 << 0)
+#       define RADEON_TXO_MACRO_LINEAR       (0 << 2)
+#       define RADEON_TXO_MACRO_TILE         (1 << 2)
+#       define RADEON_TXO_MICRO_LINEAR       (0 << 3)
+#       define RADEON_TXO_MICRO_TILE_X2      (1 << 3)
+#       define RADEON_TXO_MICRO_TILE_OPT     (2 << 3)
+#       define RADEON_TXO_OFFSET_MASK        0xffffffe0
+#       define RADEON_TXO_OFFSET_SHIFT       5
+
+#define RADEON_PP_CUBIC_OFFSET_T0_0         0x1dd0  /* bits [31:5] */
+#define RADEON_PP_CUBIC_OFFSET_T0_1         0x1dd4
+#define RADEON_PP_CUBIC_OFFSET_T0_2         0x1dd8
+#define RADEON_PP_CUBIC_OFFSET_T0_3         0x1ddc
+#define RADEON_PP_CUBIC_OFFSET_T0_4         0x1de0
+#define RADEON_PP_CUBIC_OFFSET_T1_0         0x1e00
+#define RADEON_PP_CUBIC_OFFSET_T1_1         0x1e04
+#define RADEON_PP_CUBIC_OFFSET_T1_2         0x1e08
+#define RADEON_PP_CUBIC_OFFSET_T1_3         0x1e0c
+#define RADEON_PP_CUBIC_OFFSET_T1_4         0x1e10
+#define RADEON_PP_CUBIC_OFFSET_T2_0         0x1e14
+#define RADEON_PP_CUBIC_OFFSET_T2_1         0x1e18
+#define RADEON_PP_CUBIC_OFFSET_T2_2         0x1e1c
+#define RADEON_PP_CUBIC_OFFSET_T2_3         0x1e20
+#define RADEON_PP_CUBIC_OFFSET_T2_4         0x1e24
+
+#define RADEON_PP_TEX_SIZE_0                0x1d04  /* NPOT */
+#define RADEON_PP_TEX_SIZE_1                0x1d0c
+#define RADEON_PP_TEX_SIZE_2                0x1d14
+#       define RADEON_TEX_USIZE_MASK        (0x7ff << 0)
+#       define RADEON_TEX_USIZE_SHIFT       0
+#       define RADEON_TEX_VSIZE_MASK        (0x7ff << 16)
+#       define RADEON_TEX_VSIZE_SHIFT       16
+#       define RADEON_SIGNED_RGB_MASK       (1 << 30)
+#       define RADEON_SIGNED_RGB_SHIFT      30
+#       define RADEON_SIGNED_ALPHA_MASK     (1 << 31)
+#       define RADEON_SIGNED_ALPHA_SHIFT    31
+#define RADEON_PP_TEX_PITCH_0               0x1d08  /* NPOT */
+#define RADEON_PP_TEX_PITCH_1               0x1d10  /* NPOT */
+#define RADEON_PP_TEX_PITCH_2               0x1d18  /* NPOT */
+/* note: bits 13-5: 32 byte aligned stride of texture map */
+
+#define RADEON_PP_TXCBLEND_0                0x1c60
+#define RADEON_PP_TXCBLEND_1                0x1c78
+#define RADEON_PP_TXCBLEND_2                0x1c90
+#       define RADEON_COLOR_ARG_A_SHIFT          0
+#       define RADEON_COLOR_ARG_A_MASK           (0x1f << 0)
+#       define RADEON_COLOR_ARG_A_ZERO           (0    << 0)
+#       define RADEON_COLOR_ARG_A_CURRENT_COLOR  (2    << 0)
+#       define RADEON_COLOR_ARG_A_CURRENT_ALPHA  (3    << 0)
+#       define RADEON_COLOR_ARG_A_DIFFUSE_COLOR  (4    << 0)
+#       define RADEON_COLOR_ARG_A_DIFFUSE_ALPHA  (5    << 0)
+#       define RADEON_COLOR_ARG_A_SPECULAR_COLOR (6    << 0)
+#       define RADEON_COLOR_ARG_A_SPECULAR_ALPHA (7    << 0)
+#       define RADEON_COLOR_ARG_A_TFACTOR_COLOR  (8    << 0)
+#       define RADEON_COLOR_ARG_A_TFACTOR_ALPHA  (9    << 0)
+#       define RADEON_COLOR_ARG_A_T0_COLOR       (10   << 0)
+#       define RADEON_COLOR_ARG_A_T0_ALPHA       (11   << 0)
+#       define RADEON_COLOR_ARG_A_T1_COLOR       (12   << 0)
+#       define RADEON_COLOR_ARG_A_T1_ALPHA       (13   << 0)
+#       define RADEON_COLOR_ARG_A_T2_COLOR       (14   << 0)
+#       define RADEON_COLOR_ARG_A_T2_ALPHA       (15   << 0)
+#       define RADEON_COLOR_ARG_A_T3_COLOR       (16   << 0)
+#       define RADEON_COLOR_ARG_A_T3_ALPHA       (17   << 0)
+#       define RADEON_COLOR_ARG_B_SHIFT          5
+#       define RADEON_COLOR_ARG_B_MASK           (0x1f << 5)
+#       define RADEON_COLOR_ARG_B_ZERO           (0    << 5)
+#       define RADEON_COLOR_ARG_B_CURRENT_COLOR  (2    << 5)
+#       define RADEON_COLOR_ARG_B_CURRENT_ALPHA  (3    << 5)
+#       define RADEON_COLOR_ARG_B_DIFFUSE_COLOR  (4    << 5)
+#       define RADEON_COLOR_ARG_B_DIFFUSE_ALPHA  (5    << 5)
+#       define RADEON_COLOR_ARG_B_SPECULAR_COLOR (6    << 5)
+#       define RADEON_COLOR_ARG_B_SPECULAR_ALPHA (7    << 5)
+#       define RADEON_COLOR_ARG_B_TFACTOR_COLOR  (8    << 5)
+#       define RADEON_COLOR_ARG_B_TFACTOR_ALPHA  (9    << 5)
+#       define RADEON_COLOR_ARG_B_T0_COLOR       (10   << 5)
+#       define RADEON_COLOR_ARG_B_T0_ALPHA       (11   << 5)
+#       define RADEON_COLOR_ARG_B_T1_COLOR       (12   << 5)
+#       define RADEON_COLOR_ARG_B_T1_ALPHA       (13   << 5)
+#       define RADEON_COLOR_ARG_B_T2_COLOR       (14   << 5)
+#       define RADEON_COLOR_ARG_B_T2_ALPHA       (15   << 5)
+#       define RADEON_COLOR_ARG_B_T3_COLOR       (16   << 5)
+#       define RADEON_COLOR_ARG_B_T3_ALPHA       (17   << 5)
+#       define RADEON_COLOR_ARG_C_SHIFT          10
+#       define RADEON_COLOR_ARG_C_MASK           (0x1f << 10)
+#       define RADEON_COLOR_ARG_C_ZERO           (0    << 10)
+#       define RADEON_COLOR_ARG_C_CURRENT_COLOR  (2    << 10)
+#       define RADEON_COLOR_ARG_C_CURRENT_ALPHA  (3    << 10)
+#       define RADEON_COLOR_ARG_C_DIFFUSE_COLOR  (4    << 10)
+#       define RADEON_COLOR_ARG_C_DIFFUSE_ALPHA  (5    << 10)
+#       define RADEON_COLOR_ARG_C_SPECULAR_COLOR (6    << 10)
+#       define RADEON_COLOR_ARG_C_SPECULAR_ALPHA (7    << 10)
+#       define RADEON_COLOR_ARG_C_TFACTOR_COLOR  (8    << 10)
+#       define RADEON_COLOR_ARG_C_TFACTOR_ALPHA  (9    << 10)
+#       define RADEON_COLOR_ARG_C_T0_COLOR       (10   << 10)
+#       define RADEON_COLOR_ARG_C_T0_ALPHA       (11   << 10)
+#       define RADEON_COLOR_ARG_C_T1_COLOR       (12   << 10)
+#       define RADEON_COLOR_ARG_C_T1_ALPHA       (13   << 10)
+#       define RADEON_COLOR_ARG_C_T2_COLOR       (14   << 10)
+#       define RADEON_COLOR_ARG_C_T2_ALPHA       (15   << 10)
+#       define RADEON_COLOR_ARG_C_T3_COLOR       (16   << 10)
+#       define RADEON_COLOR_ARG_C_T3_ALPHA       (17   << 10)
+#       define RADEON_COMP_ARG_A                 (1 << 15)
+#       define RADEON_COMP_ARG_A_SHIFT           15
+#       define RADEON_COMP_ARG_B                 (1 << 16)
+#       define RADEON_COMP_ARG_B_SHIFT           16
+#       define RADEON_COMP_ARG_C                 (1 << 17)
+#       define RADEON_COMP_ARG_C_SHIFT           17
+#       define RADEON_BLEND_CTL_MASK             (7 << 18)
+#       define RADEON_BLEND_CTL_ADD              (0 << 18)
+#       define RADEON_BLEND_CTL_SUBTRACT         (1 << 18)
+#       define RADEON_BLEND_CTL_ADDSIGNED        (2 << 18)
+#       define RADEON_BLEND_CTL_BLEND            (3 << 18)
+#       define RADEON_BLEND_CTL_DOT3             (4 << 18)
+#       define RADEON_SCALE_SHIFT                21
+#       define RADEON_SCALE_MASK                 (3 << 21)
+#       define RADEON_SCALE_1X                   (0 << 21)
+#       define RADEON_SCALE_2X                   (1 << 21)
+#       define RADEON_SCALE_4X                   (2 << 21)
+#       define RADEON_CLAMP_TX                   (1 << 23)
+#       define RADEON_T0_EQ_TCUR                 (1 << 24)
+#       define RADEON_T1_EQ_TCUR                 (1 << 25)
+#       define RADEON_T2_EQ_TCUR                 (1 << 26)
+#       define RADEON_T3_EQ_TCUR                 (1 << 27)
+#       define RADEON_COLOR_ARG_MASK             0x1f
+#       define RADEON_COMP_ARG_SHIFT             15
+#define RADEON_PP_TXABLEND_0                0x1c64
+#define RADEON_PP_TXABLEND_1                0x1c7c
+#define RADEON_PP_TXABLEND_2                0x1c94
+#       define RADEON_ALPHA_ARG_A_SHIFT          0
+#       define RADEON_ALPHA_ARG_A_MASK           (0xf << 0)
+#       define RADEON_ALPHA_ARG_A_ZERO           (0   << 0)
+#       define RADEON_ALPHA_ARG_A_CURRENT_ALPHA  (1   << 0)
+#       define RADEON_ALPHA_ARG_A_DIFFUSE_ALPHA  (2   << 0)
+#       define RADEON_ALPHA_ARG_A_SPECULAR_ALPHA (3   << 0)
+#       define RADEON_ALPHA_ARG_A_TFACTOR_ALPHA  (4   << 0)
+#       define RADEON_ALPHA_ARG_A_T0_ALPHA       (5   << 0)
+#       define RADEON_ALPHA_ARG_A_T1_ALPHA       (6   << 0)
+#       define RADEON_ALPHA_ARG_A_T2_ALPHA       (7   << 0)
+#       define RADEON_ALPHA_ARG_A_T3_ALPHA       (8   << 0)
+#       define RADEON_ALPHA_ARG_B_SHIFT          4
+#       define RADEON_ALPHA_ARG_B_MASK           (0xf << 4)
+#       define RADEON_ALPHA_ARG_B_ZERO           (0   << 4)
+#       define RADEON_ALPHA_ARG_B_CURRENT_ALPHA  (1   << 4)
+#       define RADEON_ALPHA_ARG_B_DIFFUSE_ALPHA  (2   << 4)
+#       define RADEON_ALPHA_ARG_B_SPECULAR_ALPHA (3   << 4)
+#       define RADEON_ALPHA_ARG_B_TFACTOR_ALPHA  (4   << 4)
+#       define RADEON_ALPHA_ARG_B_T0_ALPHA       (5   << 4)
+#       define RADEON_ALPHA_ARG_B_T1_ALPHA       (6   << 4)
+#       define RADEON_ALPHA_ARG_B_T2_ALPHA       (7   << 4)
+#       define RADEON_ALPHA_ARG_B_T3_ALPHA       (8   << 4)
+#       define RADEON_ALPHA_ARG_C_SHIFT          8
+#       define RADEON_ALPHA_ARG_C_MASK           (0xf << 8)
+#       define RADEON_ALPHA_ARG_C_ZERO           (0   << 8)
+#       define RADEON_ALPHA_ARG_C_CURRENT_ALPHA  (1   << 8)
+#       define RADEON_ALPHA_ARG_C_DIFFUSE_ALPHA  (2   << 8)
+#       define RADEON_ALPHA_ARG_C_SPECULAR_ALPHA (3   << 8)
+#       define RADEON_ALPHA_ARG_C_TFACTOR_ALPHA  (4   << 8)
+#       define RADEON_ALPHA_ARG_C_T0_ALPHA       (5   << 8)
+#       define RADEON_ALPHA_ARG_C_T1_ALPHA       (6   << 8)
+#       define RADEON_ALPHA_ARG_C_T2_ALPHA       (7   << 8)
+#       define RADEON_ALPHA_ARG_C_T3_ALPHA       (8   << 8)
+#       define RADEON_DOT_ALPHA_DONT_REPLICATE   (1   << 9)
+#       define RADEON_ALPHA_ARG_MASK             0xf
+
+#define RADEON_PP_TFACTOR_0                 0x1c68
+#define RADEON_PP_TFACTOR_1                 0x1c80
+#define RADEON_PP_TFACTOR_2                 0x1c98
+
+#define RADEON_RB3D_BLENDCNTL               0x1c20
+#       define RADEON_COMB_FCN_MASK                    (3  << 12)
+#       define RADEON_COMB_FCN_ADD_CLAMP               (0  << 12)
+#       define RADEON_COMB_FCN_ADD_NOCLAMP             (1  << 12)
+#       define RADEON_COMB_FCN_SUB_CLAMP               (2  << 12)
+#       define RADEON_COMB_FCN_SUB_NOCLAMP             (3  << 12)
+#       define RADEON_SRC_BLEND_GL_ZERO                (32 << 16)
+#       define RADEON_SRC_BLEND_GL_ONE                 (33 << 16)
+#       define RADEON_SRC_BLEND_GL_SRC_COLOR           (34 << 16)
+#       define RADEON_SRC_BLEND_GL_ONE_MINUS_SRC_COLOR (35 << 16)
+#       define RADEON_SRC_BLEND_GL_DST_COLOR           (36 << 16)
+#       define RADEON_SRC_BLEND_GL_ONE_MINUS_DST_COLOR (37 << 16)
+#       define RADEON_SRC_BLEND_GL_SRC_ALPHA           (38 << 16)
+#       define RADEON_SRC_BLEND_GL_ONE_MINUS_SRC_ALPHA (39 << 16)
+#       define RADEON_SRC_BLEND_GL_DST_ALPHA           (40 << 16)
+#       define RADEON_SRC_BLEND_GL_ONE_MINUS_DST_ALPHA (41 << 16)
+#       define RADEON_SRC_BLEND_GL_SRC_ALPHA_SATURATE  (42 << 16)
+#       define RADEON_SRC_BLEND_MASK                   (63 << 16)
+#       define RADEON_DST_BLEND_GL_ZERO                (32 << 24)
+#       define RADEON_DST_BLEND_GL_ONE                 (33 << 24)
+#       define RADEON_DST_BLEND_GL_SRC_COLOR           (34 << 24)
+#       define RADEON_DST_BLEND_GL_ONE_MINUS_SRC_COLOR (35 << 24)
+#       define RADEON_DST_BLEND_GL_DST_COLOR           (36 << 24)
+#       define RADEON_DST_BLEND_GL_ONE_MINUS_DST_COLOR (37 << 24)
+#       define RADEON_DST_BLEND_GL_SRC_ALPHA           (38 << 24)
+#       define RADEON_DST_BLEND_GL_ONE_MINUS_SRC_ALPHA (39 << 24)
+#       define RADEON_DST_BLEND_GL_DST_ALPHA           (40 << 24)
+#       define RADEON_DST_BLEND_GL_ONE_MINUS_DST_ALPHA (41 << 24)
+#       define RADEON_DST_BLEND_MASK                   (63 << 24)
+#define RADEON_RB3D_CNTL                    0x1c3c
+#       define RADEON_ALPHA_BLEND_ENABLE       (1  <<  0)
+#       define RADEON_PLANE_MASK_ENABLE        (1  <<  1)
+#       define RADEON_DITHER_ENABLE            (1  <<  2)
+#       define RADEON_ROUND_ENABLE             (1  <<  3)
+#       define RADEON_SCALE_DITHER_ENABLE      (1  <<  4)
+#       define RADEON_DITHER_INIT              (1  <<  5)
+#       define RADEON_ROP_ENABLE               (1  <<  6)
+#       define RADEON_STENCIL_ENABLE           (1  <<  7)
+#       define RADEON_Z_ENABLE                 (1  <<  8)
+#       define RADEON_DEPTH_XZ_OFFEST_ENABLE   (1  <<  9)
+#       define RADEON_RB3D_COLOR_FORMAT_SHIFT  10
+
+#       define RADEON_COLOR_FORMAT_ARGB1555    3
+#       define RADEON_COLOR_FORMAT_RGB565      4
+#       define RADEON_COLOR_FORMAT_ARGB8888    6
+#       define RADEON_COLOR_FORMAT_RGB332      7
+#       define RADEON_COLOR_FORMAT_Y8          8
+#       define RADEON_COLOR_FORMAT_RGB8        9
+#       define RADEON_COLOR_FORMAT_YUV422_VYUY 11
+#       define RADEON_COLOR_FORMAT_YUV422_YVYU 12
+#       define RADEON_COLOR_FORMAT_aYUV444     14
+#       define RADEON_COLOR_FORMAT_ARGB4444    15
+
+#       define RADEON_CLRCMP_FLIP_ENABLE       (1  << 14)
+#define RADEON_RB3D_COLOROFFSET             0x1c40
+#       define RADEON_COLOROFFSET_MASK      0xfffffff0
+#define RADEON_RB3D_COLORPITCH              0x1c48
+#       define RADEON_COLORPITCH_MASK         0x000001ff8
+#       define RADEON_COLOR_TILE_ENABLE       (1 << 16)
+#       define RADEON_COLOR_MICROTILE_ENABLE  (1 << 17)
+#       define RADEON_COLOR_ENDIAN_NO_SWAP    (0 << 18)
+#       define RADEON_COLOR_ENDIAN_WORD_SWAP  (1 << 18)
+#       define RADEON_COLOR_ENDIAN_DWORD_SWAP (2 << 18)
+#define RADEON_RB3D_DEPTHOFFSET             0x1c24
+#define RADEON_RB3D_DEPTHPITCH              0x1c28
+#       define RADEON_DEPTHPITCH_MASK         0x00001ff8
+#       define RADEON_DEPTH_ENDIAN_NO_SWAP    (0 << 18)
+#       define RADEON_DEPTH_ENDIAN_WORD_SWAP  (1 << 18)
+#       define RADEON_DEPTH_ENDIAN_DWORD_SWAP (2 << 18)
+#define RADEON_RB3D_PLANEMASK               0x1d84
+#define RADEON_RB3D_ROPCNTL                 0x1d80
+#       define RADEON_ROP_MASK              (15 << 8)
+#       define RADEON_ROP_CLEAR             (0  << 8)
+#       define RADEON_ROP_NOR               (1  << 8)
+#       define RADEON_ROP_AND_INVERTED      (2  << 8)
+#       define RADEON_ROP_COPY_INVERTED     (3  << 8)
+#       define RADEON_ROP_AND_REVERSE       (4  << 8)
+#       define RADEON_ROP_INVERT            (5  << 8)
+#       define RADEON_ROP_XOR               (6  << 8)
+#       define RADEON_ROP_NAND              (7  << 8)
+#       define RADEON_ROP_AND               (8  << 8)
+#       define RADEON_ROP_EQUIV             (9  << 8)
+#       define RADEON_ROP_NOOP              (10 << 8)
+#       define RADEON_ROP_OR_INVERTED       (11 << 8)
+#       define RADEON_ROP_COPY              (12 << 8)
+#       define RADEON_ROP_OR_REVERSE        (13 << 8)
+#       define RADEON_ROP_OR                (14 << 8)
+#       define RADEON_ROP_SET               (15 << 8)
+#define RADEON_RB3D_STENCILREFMASK          0x1d7c
+#       define RADEON_STENCIL_REF_SHIFT       0
+#       define RADEON_STENCIL_REF_MASK        (0xff << 0)
+#       define RADEON_STENCIL_MASK_SHIFT      16
+#       define RADEON_STENCIL_VALUE_MASK      (0xff << 16)
+#       define RADEON_STENCIL_WRITEMASK_SHIFT 24
+#       define RADEON_STENCIL_WRITE_MASK      (0xff << 24)
+#define RADEON_RB3D_ZSTENCILCNTL            0x1c2c
+#       define RADEON_DEPTH_FORMAT_MASK          (0xf << 0)
+#       define RADEON_DEPTH_FORMAT_16BIT_INT_Z   (0  <<  0)
+#       define RADEON_DEPTH_FORMAT_24BIT_INT_Z   (2  <<  0)
+#       define RADEON_DEPTH_FORMAT_24BIT_FLOAT_Z (3  <<  0)
+#       define RADEON_DEPTH_FORMAT_32BIT_INT_Z   (4  <<  0)
+#       define RADEON_DEPTH_FORMAT_32BIT_FLOAT_Z (5  <<  0)
+#       define RADEON_DEPTH_FORMAT_16BIT_FLOAT_W (7  <<  0)
+#       define RADEON_DEPTH_FORMAT_24BIT_FLOAT_W (9  <<  0)
+#       define RADEON_DEPTH_FORMAT_32BIT_FLOAT_W (11 <<  0)
+#       define RADEON_Z_TEST_NEVER               (0  <<  4)
+#       define RADEON_Z_TEST_LESS                (1  <<  4)
+#       define RADEON_Z_TEST_LEQUAL              (2  <<  4)
+#       define RADEON_Z_TEST_EQUAL               (3  <<  4)
+#       define RADEON_Z_TEST_GEQUAL              (4  <<  4)
+#       define RADEON_Z_TEST_GREATER             (5  <<  4)
+#       define RADEON_Z_TEST_NEQUAL              (6  <<  4)
+#       define RADEON_Z_TEST_ALWAYS              (7  <<  4)
+#       define RADEON_Z_TEST_MASK                (7  <<  4)
+#       define RADEON_STENCIL_TEST_NEVER         (0  << 12)
+#       define RADEON_STENCIL_TEST_LESS          (1  << 12)
+#       define RADEON_STENCIL_TEST_LEQUAL        (2  << 12)
+#       define RADEON_STENCIL_TEST_EQUAL         (3  << 12)
+#       define RADEON_STENCIL_TEST_GEQUAL        (4  << 12)
+#       define RADEON_STENCIL_TEST_GREATER       (5  << 12)
+#       define RADEON_STENCIL_TEST_NEQUAL        (6  << 12)
+#       define RADEON_STENCIL_TEST_ALWAYS        (7  << 12)
+#       define RADEON_STENCIL_TEST_MASK          (0x7 << 12)
+#       define RADEON_STENCIL_FAIL_KEEP          (0  << 16)
+#       define RADEON_STENCIL_FAIL_ZERO          (1  << 16)
+#       define RADEON_STENCIL_FAIL_REPLACE       (2  << 16)
+#       define RADEON_STENCIL_FAIL_INC           (3  << 16)
+#       define RADEON_STENCIL_FAIL_DEC           (4  << 16)
+#       define RADEON_STENCIL_FAIL_INVERT        (5  << 16)
+#       define RADEON_STENCIL_FAIL_MASK          (0x7 << 16)
+#       define RADEON_STENCIL_ZPASS_KEEP         (0  << 20)
+#       define RADEON_STENCIL_ZPASS_ZERO         (1  << 20)
+#       define RADEON_STENCIL_ZPASS_REPLACE      (2  << 20)
+#       define RADEON_STENCIL_ZPASS_INC          (3  << 20)
+#       define RADEON_STENCIL_ZPASS_DEC          (4  << 20)
+#       define RADEON_STENCIL_ZPASS_INVERT       (5  << 20)
+#       define RADEON_STENCIL_ZPASS_MASK         (0x7 << 20)
+#       define RADEON_STENCIL_ZFAIL_KEEP         (0  << 24)
+#       define RADEON_STENCIL_ZFAIL_ZERO         (1  << 24)
+#       define RADEON_STENCIL_ZFAIL_REPLACE      (2  << 24)
+#       define RADEON_STENCIL_ZFAIL_INC          (3  << 24)
+#       define RADEON_STENCIL_ZFAIL_DEC          (4  << 24)
+#       define RADEON_STENCIL_ZFAIL_INVERT       (5  << 24)
+#       define RADEON_STENCIL_ZFAIL_MASK         (0x7 << 24)
+#       define RADEON_Z_COMPRESSION_ENABLE       (1  << 28)
+#       define RADEON_FORCE_Z_DIRTY              (1  << 29)
+#       define RADEON_Z_WRITE_ENABLE             (1  << 30)
+#define RADEON_RE_LINE_PATTERN              0x1cd0
+#       define RADEON_LINE_PATTERN_MASK             0x0000ffff
+#       define RADEON_LINE_REPEAT_COUNT_SHIFT       16
+#       define RADEON_LINE_PATTERN_START_SHIFT      24
+#       define RADEON_LINE_PATTERN_LITTLE_BIT_ORDER (0 << 28)
+#       define RADEON_LINE_PATTERN_BIG_BIT_ORDER    (1 << 28)
+#       define RADEON_LINE_PATTERN_AUTO_RESET       (1 << 29)
+#define RADEON_RE_LINE_STATE                0x1cd4
+#       define RADEON_LINE_CURRENT_PTR_SHIFT   0
+#       define RADEON_LINE_CURRENT_COUNT_SHIFT 8
+#define RADEON_RE_MISC                      0x26c4
+#       define RADEON_STIPPLE_COORD_MASK       0x1f
+#       define RADEON_STIPPLE_X_OFFSET_SHIFT   0
+#       define RADEON_STIPPLE_X_OFFSET_MASK    (0x1f << 0)
+#       define RADEON_STIPPLE_Y_OFFSET_SHIFT   8
+#       define RADEON_STIPPLE_Y_OFFSET_MASK    (0x1f << 8)
+#       define RADEON_STIPPLE_LITTLE_BIT_ORDER (0 << 16)
+#       define RADEON_STIPPLE_BIG_BIT_ORDER    (1 << 16)
+#define RADEON_RE_SOLID_COLOR               0x1c1c
+#define RADEON_RE_TOP_LEFT                  0x26c0
+#       define RADEON_RE_LEFT_SHIFT         0
+#       define RADEON_RE_TOP_SHIFT          16
+#define RADEON_RE_WIDTH_HEIGHT              0x1c44
+#       define RADEON_RE_WIDTH_SHIFT        0
+#       define RADEON_RE_HEIGHT_SHIFT       16
+
+#define RADEON_SE_CNTL                      0x1c4c
+#       define RADEON_FFACE_CULL_CW          (0 <<  0)
+#       define RADEON_FFACE_CULL_CCW         (1 <<  0)
+#       define RADEON_FFACE_CULL_DIR_MASK    (1 <<  0)
+#       define RADEON_BFACE_CULL             (0 <<  1)
+#       define RADEON_BFACE_SOLID            (3 <<  1)
+#       define RADEON_FFACE_CULL             (0 <<  3)
+#       define RADEON_FFACE_SOLID            (3 <<  3)
+#       define RADEON_FFACE_CULL_MASK        (3 <<  3)
+#       define RADEON_BADVTX_CULL_DISABLE    (1 <<  5)
+#       define RADEON_FLAT_SHADE_VTX_0       (0 <<  6)
+#       define RADEON_FLAT_SHADE_VTX_1       (1 <<  6)
+#       define RADEON_FLAT_SHADE_VTX_2       (2 <<  6)
+#       define RADEON_FLAT_SHADE_VTX_LAST    (3 <<  6)
+#       define RADEON_DIFFUSE_SHADE_SOLID    (0 <<  8)
+#       define RADEON_DIFFUSE_SHADE_FLAT     (1 <<  8)
+#       define RADEON_DIFFUSE_SHADE_GOURAUD  (2 <<  8)
+#       define RADEON_DIFFUSE_SHADE_MASK     (3 <<  8)
+#       define RADEON_ALPHA_SHADE_SOLID      (0 << 10)
+#       define RADEON_ALPHA_SHADE_FLAT       (1 << 10)
+#       define RADEON_ALPHA_SHADE_GOURAUD    (2 << 10)
+#       define RADEON_ALPHA_SHADE_MASK       (3 << 10)
+#       define RADEON_SPECULAR_SHADE_SOLID   (0 << 12)
+#       define RADEON_SPECULAR_SHADE_FLAT    (1 << 12)
+#       define RADEON_SPECULAR_SHADE_GOURAUD (2 << 12)
+#       define RADEON_SPECULAR_SHADE_MASK    (3 << 12)
+#       define RADEON_FOG_SHADE_SOLID        (0 << 14)
+#       define RADEON_FOG_SHADE_FLAT         (1 << 14)
+#       define RADEON_FOG_SHADE_GOURAUD      (2 << 14)
+#       define RADEON_FOG_SHADE_MASK         (3 << 14)
+#       define RADEON_ZBIAS_ENABLE_POINT     (1 << 16)
+#       define RADEON_ZBIAS_ENABLE_LINE      (1 << 17)
+#       define RADEON_ZBIAS_ENABLE_TRI       (1 << 18)
+#       define RADEON_WIDELINE_ENABLE        (1 << 20)
+#       define RADEON_VPORT_XY_XFORM_ENABLE  (1 << 24)
+#       define RADEON_VPORT_Z_XFORM_ENABLE   (1 << 25)
+#       define RADEON_VTX_PIX_CENTER_D3D     (0 << 27)
+#       define RADEON_VTX_PIX_CENTER_OGL     (1 << 27)
+#       define RADEON_ROUND_MODE_TRUNC       (0 << 28)
+#       define RADEON_ROUND_MODE_ROUND       (1 << 28)
+#       define RADEON_ROUND_MODE_ROUND_EVEN  (2 << 28)
+#       define RADEON_ROUND_MODE_ROUND_ODD   (3 << 28)
+#       define RADEON_ROUND_PREC_16TH_PIX    (0 << 30)
+#       define RADEON_ROUND_PREC_8TH_PIX     (1 << 30)
+#       define RADEON_ROUND_PREC_4TH_PIX     (2 << 30)
+#       define RADEON_ROUND_PREC_HALF_PIX    (3 << 30)
+#define R200_RE_CNTL				0x1c50
+#       define R200_STIPPLE_ENABLE		0x1
+#       define R200_SCISSOR_ENABLE		0x2
+#       define R200_PATTERN_ENABLE		0x4
+#       define R200_PERSPECTIVE_ENABLE		0x8
+#       define R200_POINT_SMOOTH		0x20
+#       define R200_VTX_STQ0_D3D		0x00010000
+#       define R200_VTX_STQ1_D3D		0x00040000
+#       define R200_VTX_STQ2_D3D		0x00100000
+#       define R200_VTX_STQ3_D3D		0x00400000
+#       define R200_VTX_STQ4_D3D		0x01000000
+#       define R200_VTX_STQ5_D3D		0x04000000
+#define RADEON_SE_CNTL_STATUS               0x2140
+#       define RADEON_VC_NO_SWAP            (0 << 0)
+#       define RADEON_VC_16BIT_SWAP         (1 << 0)
+#       define RADEON_VC_32BIT_SWAP         (2 << 0)
+#       define RADEON_VC_HALF_DWORD_SWAP    (3 << 0)
+#       define RADEON_TCL_BYPASS            (1 << 8)
+#define RADEON_SE_COORD_FMT                 0x1c50
+#       define RADEON_VTX_XY_PRE_MULT_1_OVER_W0  (1 <<  0)
+#       define RADEON_VTX_Z_PRE_MULT_1_OVER_W0   (1 <<  1)
+#       define RADEON_VTX_ST0_NONPARAMETRIC      (1 <<  8)
+#       define RADEON_VTX_ST1_NONPARAMETRIC      (1 <<  9)
+#       define RADEON_VTX_ST2_NONPARAMETRIC      (1 << 10)
+#       define RADEON_VTX_ST3_NONPARAMETRIC      (1 << 11)
+#       define RADEON_VTX_W0_NORMALIZE           (1 << 12)
+#       define RADEON_VTX_W0_IS_NOT_1_OVER_W0    (1 << 16)
+#       define RADEON_VTX_ST0_PRE_MULT_1_OVER_W0 (1 << 17)
+#       define RADEON_VTX_ST1_PRE_MULT_1_OVER_W0 (1 << 19)
+#       define RADEON_VTX_ST2_PRE_MULT_1_OVER_W0 (1 << 21)
+#       define RADEON_VTX_ST3_PRE_MULT_1_OVER_W0 (1 << 23)
+#       define RADEON_TEX1_W_ROUTING_USE_W0      (0 << 26)
+#       define RADEON_TEX1_W_ROUTING_USE_Q1      (1 << 26)
+#define RADEON_SE_LINE_WIDTH                0x1db8
+#define RADEON_SE_TCL_LIGHT_MODEL_CTL       0x226c
+#       define RADEON_LIGHTING_ENABLE              (1 << 0)
+#       define RADEON_LIGHT_IN_MODELSPACE          (1 << 1)
+#       define RADEON_LOCAL_VIEWER                 (1 << 2)
+#       define RADEON_NORMALIZE_NORMALS            (1 << 3)
+#       define RADEON_RESCALE_NORMALS              (1 << 4)
+#       define RADEON_SPECULAR_LIGHTS              (1 << 5)
+#       define RADEON_DIFFUSE_SPECULAR_COMBINE     (1 << 6)
+#       define RADEON_LIGHT_ALPHA                  (1 << 7)
+#       define RADEON_LOCAL_LIGHT_VEC_GL           (1 << 8)
+#       define RADEON_LIGHT_NO_NORMAL_AMBIENT_ONLY (1 << 9)
+#       define RADEON_LM_SOURCE_STATE_PREMULT      0
+#       define RADEON_LM_SOURCE_STATE_MULT         1
+#       define RADEON_LM_SOURCE_VERTEX_DIFFUSE     2
+#       define RADEON_LM_SOURCE_VERTEX_SPECULAR    3
+#       define RADEON_EMISSIVE_SOURCE_SHIFT        16
+#       define RADEON_AMBIENT_SOURCE_SHIFT         18
+#       define RADEON_DIFFUSE_SOURCE_SHIFT         20
+#       define RADEON_SPECULAR_SOURCE_SHIFT        22
+#define RADEON_SE_TCL_MATERIAL_AMBIENT_RED     0x2220
+#define RADEON_SE_TCL_MATERIAL_AMBIENT_GREEN   0x2224
+#define RADEON_SE_TCL_MATERIAL_AMBIENT_BLUE    0x2228
+#define RADEON_SE_TCL_MATERIAL_AMBIENT_ALPHA   0x222c
+#define RADEON_SE_TCL_MATERIAL_DIFFUSE_RED     0x2230
+#define RADEON_SE_TCL_MATERIAL_DIFFUSE_GREEN   0x2234
+#define RADEON_SE_TCL_MATERIAL_DIFFUSE_BLUE    0x2238
+#define RADEON_SE_TCL_MATERIAL_DIFFUSE_ALPHA   0x223c
+#define RADEON_SE_TCL_MATERIAL_EMMISSIVE_RED   0x2210
+#define RADEON_SE_TCL_MATERIAL_EMMISSIVE_GREEN 0x2214
+#define RADEON_SE_TCL_MATERIAL_EMMISSIVE_BLUE  0x2218
+#define RADEON_SE_TCL_MATERIAL_EMMISSIVE_ALPHA 0x221c
+#define RADEON_SE_TCL_MATERIAL_SPECULAR_RED    0x2240
+#define RADEON_SE_TCL_MATERIAL_SPECULAR_GREEN  0x2244
+#define RADEON_SE_TCL_MATERIAL_SPECULAR_BLUE   0x2248
+#define RADEON_SE_TCL_MATERIAL_SPECULAR_ALPHA  0x224c
+#define RADEON_SE_TCL_MATRIX_SELECT_0       0x225c
+#       define RADEON_MODELVIEW_0_SHIFT        0
+#       define RADEON_MODELVIEW_1_SHIFT        4
+#       define RADEON_MODELVIEW_2_SHIFT        8
+#       define RADEON_MODELVIEW_3_SHIFT        12
+#       define RADEON_IT_MODELVIEW_0_SHIFT     16
+#       define RADEON_IT_MODELVIEW_1_SHIFT     20
+#       define RADEON_IT_MODELVIEW_2_SHIFT     24
+#       define RADEON_IT_MODELVIEW_3_SHIFT     28
+#define RADEON_SE_TCL_MATRIX_SELECT_1       0x2260
+#       define RADEON_MODELPROJECT_0_SHIFT     0
+#       define RADEON_MODELPROJECT_1_SHIFT     4
+#       define RADEON_MODELPROJECT_2_SHIFT     8
+#       define RADEON_MODELPROJECT_3_SHIFT     12
+#       define RADEON_TEXMAT_0_SHIFT           16
+#       define RADEON_TEXMAT_1_SHIFT           20
+#       define RADEON_TEXMAT_2_SHIFT           24
+#       define RADEON_TEXMAT_3_SHIFT           28
+
+
+#define RADEON_SE_TCL_OUTPUT_VTX_FMT        0x2254
+#       define RADEON_TCL_VTX_W0                 (1 <<  0)
+#       define RADEON_TCL_VTX_FP_DIFFUSE         (1 <<  1)
+#       define RADEON_TCL_VTX_FP_ALPHA           (1 <<  2)
+#       define RADEON_TCL_VTX_PK_DIFFUSE         (1 <<  3)
+#       define RADEON_TCL_VTX_FP_SPEC            (1 <<  4)
+#       define RADEON_TCL_VTX_FP_FOG             (1 <<  5)
+#       define RADEON_TCL_VTX_PK_SPEC            (1 <<  6)
+#       define RADEON_TCL_VTX_ST0                (1 <<  7)
+#       define RADEON_TCL_VTX_ST1                (1 <<  8)
+#       define RADEON_TCL_VTX_Q1                 (1 <<  9)
+#       define RADEON_TCL_VTX_ST2                (1 << 10)
+#       define RADEON_TCL_VTX_Q2                 (1 << 11)
+#       define RADEON_TCL_VTX_ST3                (1 << 12)
+#       define RADEON_TCL_VTX_Q3                 (1 << 13)
+#       define RADEON_TCL_VTX_Q0                 (1 << 14)
+#       define RADEON_TCL_VTX_WEIGHT_COUNT_SHIFT 15
+#       define RADEON_TCL_VTX_NORM0              (1 << 18)
+#       define RADEON_TCL_VTX_XY1                (1 << 27)
+#       define RADEON_TCL_VTX_Z1                 (1 << 28)
+#       define RADEON_TCL_VTX_W1                 (1 << 29)
+#       define RADEON_TCL_VTX_NORM1              (1 << 30)
+#       define RADEON_TCL_VTX_Z0                 (1 << 31)
+
+#define RADEON_SE_TCL_OUTPUT_VTX_SEL        0x2258
+#       define RADEON_TCL_COMPUTE_XYZW           (1 << 0)
+#       define RADEON_TCL_COMPUTE_DIFFUSE        (1 << 1)
+#       define RADEON_TCL_COMPUTE_SPECULAR       (1 << 2)
+#       define RADEON_TCL_FORCE_NAN_IF_COLOR_NAN (1 << 3)
+#       define RADEON_TCL_FORCE_INORDER_PROC     (1 << 4)
+#       define RADEON_TCL_TEX_INPUT_TEX_0        0
+#       define RADEON_TCL_TEX_INPUT_TEX_1        1
+#       define RADEON_TCL_TEX_INPUT_TEX_2        2
+#       define RADEON_TCL_TEX_INPUT_TEX_3        3
+#       define RADEON_TCL_TEX_COMPUTED_TEX_0     8
+#       define RADEON_TCL_TEX_COMPUTED_TEX_1     9
+#       define RADEON_TCL_TEX_COMPUTED_TEX_2     10
+#       define RADEON_TCL_TEX_COMPUTED_TEX_3     11
+#       define RADEON_TCL_TEX_0_OUTPUT_SHIFT     16
+#       define RADEON_TCL_TEX_1_OUTPUT_SHIFT     20
+#       define RADEON_TCL_TEX_2_OUTPUT_SHIFT     24
+#       define RADEON_TCL_TEX_3_OUTPUT_SHIFT     28
+
+#define RADEON_SE_TCL_PER_LIGHT_CTL_0       0x2270
+#       define RADEON_LIGHT_0_ENABLE               (1 <<  0)
+#       define RADEON_LIGHT_0_ENABLE_AMBIENT       (1 <<  1)
+#       define RADEON_LIGHT_0_ENABLE_SPECULAR      (1 <<  2)
+#       define RADEON_LIGHT_0_IS_LOCAL             (1 <<  3)
+#       define RADEON_LIGHT_0_IS_SPOT              (1 <<  4)
+#       define RADEON_LIGHT_0_DUAL_CONE            (1 <<  5)
+#       define RADEON_LIGHT_0_ENABLE_RANGE_ATTEN   (1 <<  6)
+#       define RADEON_LIGHT_0_CONSTANT_RANGE_ATTEN (1 <<  7)
+#       define RADEON_LIGHT_0_SHIFT                0
+#       define RADEON_LIGHT_1_ENABLE               (1 << 16)
+#       define RADEON_LIGHT_1_ENABLE_AMBIENT       (1 << 17)
+#       define RADEON_LIGHT_1_ENABLE_SPECULAR      (1 << 18)
+#       define RADEON_LIGHT_1_IS_LOCAL             (1 << 19)
+#       define RADEON_LIGHT_1_IS_SPOT              (1 << 20)
+#       define RADEON_LIGHT_1_DUAL_CONE            (1 << 21)
+#       define RADEON_LIGHT_1_ENABLE_RANGE_ATTEN   (1 << 22)
+#       define RADEON_LIGHT_1_CONSTANT_RANGE_ATTEN (1 << 23)
+#       define RADEON_LIGHT_1_SHIFT                16
+#define RADEON_SE_TCL_PER_LIGHT_CTL_1       0x2274
+#       define RADEON_LIGHT_2_SHIFT            0
+#       define RADEON_LIGHT_3_SHIFT            16
+#define RADEON_SE_TCL_PER_LIGHT_CTL_2       0x2278
+#       define RADEON_LIGHT_4_SHIFT            0
+#       define RADEON_LIGHT_5_SHIFT            16
+#define RADEON_SE_TCL_PER_LIGHT_CTL_3       0x227c
+#       define RADEON_LIGHT_6_SHIFT            0
+#       define RADEON_LIGHT_7_SHIFT            16
+
+#define RADEON_SE_TCL_SHININESS             0x2250
+
+#define RADEON_SE_TCL_TEXTURE_PROC_CTL      0x2268
+#       define RADEON_TEXGEN_TEXMAT_0_ENABLE      (1 << 0)
+#       define RADEON_TEXGEN_TEXMAT_1_ENABLE      (1 << 1)
+#       define RADEON_TEXGEN_TEXMAT_2_ENABLE      (1 << 2)
+#       define RADEON_TEXGEN_TEXMAT_3_ENABLE      (1 << 3)
+#       define RADEON_TEXMAT_0_ENABLE             (1 << 4)
+#       define RADEON_TEXMAT_1_ENABLE             (1 << 5)
+#       define RADEON_TEXMAT_2_ENABLE             (1 << 6)
+#       define RADEON_TEXMAT_3_ENABLE             (1 << 7)
+#       define RADEON_TEXGEN_INPUT_MASK           0xf
+#       define RADEON_TEXGEN_INPUT_TEXCOORD_0     0
+#       define RADEON_TEXGEN_INPUT_TEXCOORD_1     1
+#       define RADEON_TEXGEN_INPUT_TEXCOORD_2     2
+#       define RADEON_TEXGEN_INPUT_TEXCOORD_3     3
+#       define RADEON_TEXGEN_INPUT_OBJ            4
+#       define RADEON_TEXGEN_INPUT_EYE            5
+#       define RADEON_TEXGEN_INPUT_EYE_NORMAL     6
+#       define RADEON_TEXGEN_INPUT_EYE_REFLECT    7
+#       define RADEON_TEXGEN_INPUT_EYE_NORMALIZED 8
+#       define RADEON_TEXGEN_0_INPUT_SHIFT        16
+#       define RADEON_TEXGEN_1_INPUT_SHIFT        20
+#       define RADEON_TEXGEN_2_INPUT_SHIFT        24
+#       define RADEON_TEXGEN_3_INPUT_SHIFT        28
+
+#define RADEON_SE_TCL_UCP_VERT_BLEND_CTL    0x2264
+#       define RADEON_UCP_IN_CLIP_SPACE            (1 <<  0)
+#       define RADEON_UCP_IN_MODEL_SPACE           (1 <<  1)
+#       define RADEON_UCP_ENABLE_0                 (1 <<  2)
+#       define RADEON_UCP_ENABLE_1                 (1 <<  3)
+#       define RADEON_UCP_ENABLE_2                 (1 <<  4)
+#       define RADEON_UCP_ENABLE_3                 (1 <<  5)
+#       define RADEON_UCP_ENABLE_4                 (1 <<  6)
+#       define RADEON_UCP_ENABLE_5                 (1 <<  7)
+#       define RADEON_TCL_FOG_MASK                 (3 <<  8)
+#       define RADEON_TCL_FOG_DISABLE              (0 <<  8)
+#       define RADEON_TCL_FOG_EXP                  (1 <<  8)
+#       define RADEON_TCL_FOG_EXP2                 (2 <<  8)
+#       define RADEON_TCL_FOG_LINEAR               (3 <<  8)
+#       define RADEON_RNG_BASED_FOG                (1 << 10)
+#       define RADEON_LIGHT_TWOSIDE                (1 << 11)
+#       define RADEON_BLEND_OP_COUNT_MASK          (7 << 12)
+#       define RADEON_BLEND_OP_COUNT_SHIFT         12
+#       define RADEON_POSITION_BLEND_OP_ENABLE     (1 << 16)
+#       define RADEON_NORMAL_BLEND_OP_ENABLE       (1 << 17)
+#       define RADEON_VERTEX_BLEND_SRC_0_PRIMARY   (1 << 18)
+#       define RADEON_VERTEX_BLEND_SRC_0_SECONDARY (1 << 18)
+#       define RADEON_VERTEX_BLEND_SRC_1_PRIMARY   (1 << 19)
+#       define RADEON_VERTEX_BLEND_SRC_1_SECONDARY (1 << 19)
+#       define RADEON_VERTEX_BLEND_SRC_2_PRIMARY   (1 << 20)
+#       define RADEON_VERTEX_BLEND_SRC_2_SECONDARY (1 << 20)
+#       define RADEON_VERTEX_BLEND_SRC_3_PRIMARY   (1 << 21)
+#       define RADEON_VERTEX_BLEND_SRC_3_SECONDARY (1 << 21)
+#       define RADEON_VERTEX_BLEND_WGT_MINUS_ONE   (1 << 22)
+#       define RADEON_CULL_FRONT_IS_CW             (0 << 28)
+#       define RADEON_CULL_FRONT_IS_CCW            (1 << 28)
+#       define RADEON_CULL_FRONT                   (1 << 29)
+#       define RADEON_CULL_BACK                    (1 << 30)
+#       define RADEON_FORCE_W_TO_ONE               (1 << 31)
+
+#define RADEON_SE_VPORT_XSCALE              0x1d98
+#define RADEON_SE_VPORT_XOFFSET             0x1d9c
+#define RADEON_SE_VPORT_YSCALE              0x1da0
+#define RADEON_SE_VPORT_YOFFSET             0x1da4
+#define RADEON_SE_VPORT_ZSCALE              0x1da8
+#define RADEON_SE_VPORT_ZOFFSET             0x1dac
+#define RADEON_SE_ZBIAS_FACTOR              0x1db0
+#define RADEON_SE_ZBIAS_CONSTANT            0x1db4
+
+#define RADEON_SE_VTX_FMT                   0x2080
+#       define RADEON_SE_VTX_FMT_XY         0x00000000
+#       define RADEON_SE_VTX_FMT_W0         0x00000001
+#       define RADEON_SE_VTX_FMT_FPCOLOR    0x00000002
+#       define RADEON_SE_VTX_FMT_FPALPHA    0x00000004
+#       define RADEON_SE_VTX_FMT_PKCOLOR    0x00000008
+#       define RADEON_SE_VTX_FMT_FPSPEC     0x00000010
+#       define RADEON_SE_VTX_FMT_FPFOG      0x00000020
+#       define RADEON_SE_VTX_FMT_PKSPEC     0x00000040
+#       define RADEON_SE_VTX_FMT_ST0        0x00000080
+#       define RADEON_SE_VTX_FMT_ST1        0x00000100
+#       define RADEON_SE_VTX_FMT_Q1         0x00000200
+#       define RADEON_SE_VTX_FMT_ST2        0x00000400
+#       define RADEON_SE_VTX_FMT_Q2         0x00000800
+#       define RADEON_SE_VTX_FMT_ST3        0x00001000
+#       define RADEON_SE_VTX_FMT_Q3         0x00002000
+#       define RADEON_SE_VTX_FMT_Q0         0x00004000
+#       define RADEON_SE_VTX_FMT_BLND_WEIGHT_CNT_MASK  0x00038000
+#       define RADEON_SE_VTX_FMT_N0         0x00040000
+#       define RADEON_SE_VTX_FMT_XY1        0x08000000
+#       define RADEON_SE_VTX_FMT_Z1         0x10000000
+#       define RADEON_SE_VTX_FMT_W1         0x20000000
+#       define RADEON_SE_VTX_FMT_N1         0x40000000
+#       define RADEON_SE_VTX_FMT_Z          0x80000000
+
+#define RADEON_SE_VF_CNTL                             0x2084
+#       define RADEON_VF_PRIM_TYPE_POINT_LIST         1
+#       define RADEON_VF_PRIM_TYPE_LINE_LIST          2
+#       define RADEON_VF_PRIM_TYPE_LINE_STRIP         3
+#       define RADEON_VF_PRIM_TYPE_TRIANGLE_LIST      4
+#       define RADEON_VF_PRIM_TYPE_TRIANGLE_FAN       5
+#       define RADEON_VF_PRIM_TYPE_TRIANGLE_STRIP     6
+#       define RADEON_VF_PRIM_TYPE_TRIANGLE_FLAG      7
+#       define RADEON_VF_PRIM_TYPE_RECTANGLE_LIST     8
+#       define RADEON_VF_PRIM_TYPE_POINT_LIST_3       9
+#       define RADEON_VF_PRIM_TYPE_LINE_LIST_3        10
+#       define RADEON_VF_PRIM_TYPE_SPIRIT_LIST        11
+#       define RADEON_VF_PRIM_TYPE_LINE_LOOP          12
+#       define RADEON_VF_PRIM_TYPE_QUAD_LIST          13
+#       define RADEON_VF_PRIM_TYPE_QUAD_STRIP         14
+#       define RADEON_VF_PRIM_TYPE_POLYGON            15
+#       define RADEON_VF_PRIM_WALK_STATE              (0<<4)
+#       define RADEON_VF_PRIM_WALK_INDEX              (1<<4)
+#       define RADEON_VF_PRIM_WALK_LIST               (2<<4)
+#       define RADEON_VF_PRIM_WALK_DATA               (3<<4)
+#       define RADEON_VF_COLOR_ORDER_RGBA             (1<<6)
+#       define RADEON_VF_RADEON_MODE                  (1<<8)
+#       define RADEON_VF_TCL_OUTPUT_CTL_ENA           (1<<9)
+#       define RADEON_VF_PROG_STREAM_ENA              (1<<10)
+#       define RADEON_VF_INDEX_SIZE_SHIFT             11
+#       define RADEON_VF_NUM_VERTICES_SHIFT           16
+
+#define RADEON_SE_PORT_DATA0			0x2000
+
+#define R200_SE_VAP_CNTL			0x2080
+#       define R200_VAP_TCL_ENABLE		0x00000001
+#       define R200_VAP_SINGLE_BUF_STATE_ENABLE	0x00000010
+#       define R200_VAP_FORCE_W_TO_ONE		0x00010000
+#       define R200_VAP_D3D_TEX_DEFAULT		0x00020000
+#       define R200_VAP_VF_MAX_VTX_NUM__SHIFT	18
+#       define R200_VAP_VF_MAX_VTX_NUM		(9 << 18)
+#       define R200_VAP_DX_CLIP_SPACE_DEF	0x00400000
+#define R200_VF_MAX_VTX_INDX			0x210c
+#define R200_VF_MIN_VTX_INDX			0x2110
+#define R200_SE_VTE_CNTL			0x20b0
+#       define R200_VPORT_X_SCALE_ENA			0x00000001
+#       define R200_VPORT_X_OFFSET_ENA			0x00000002
+#       define R200_VPORT_Y_SCALE_ENA			0x00000004
+#       define R200_VPORT_Y_OFFSET_ENA			0x00000008
+#       define R200_VPORT_Z_SCALE_ENA			0x00000010
+#       define R200_VPORT_Z_OFFSET_ENA			0x00000020
+#       define R200_VTX_XY_FMT				0x00000100
+#       define R200_VTX_Z_FMT				0x00000200
+#       define R200_VTX_W0_FMT				0x00000400
+#       define R200_VTX_W0_NORMALIZE			0x00000800
+#       define R200_VTX_ST_DENORMALIZED		0x00001000
+#define R200_SE_VAP_CNTL_STATUS			0x2140
+#       define R200_VC_NO_SWAP			(0 << 0)
+#       define R200_VC_16BIT_SWAP		(1 << 0)
+#       define R200_VC_32BIT_SWAP		(2 << 0)
+#define R200_PP_TXFILTER_0			0x2c00
+#define R200_PP_TXFILTER_1			0x2c20
+#define R200_PP_TXFILTER_2			0x2c40
+#define R200_PP_TXFILTER_3			0x2c60
+#define R200_PP_TXFILTER_4			0x2c80
+#define R200_PP_TXFILTER_5			0x2ca0
+#       define R200_MAG_FILTER_NEAREST		(0  <<  0)
+#       define R200_MAG_FILTER_LINEAR		(1  <<  0)
+#       define R200_MAG_FILTER_MASK		(1  <<  0)
+#       define R200_MIN_FILTER_NEAREST		(0  <<  1)
+#       define R200_MIN_FILTER_LINEAR		(1  <<  1)
+#       define R200_MIN_FILTER_NEAREST_MIP_NEAREST (2  <<  1)
+#       define R200_MIN_FILTER_NEAREST_MIP_LINEAR (3  <<  1)
+#       define R200_MIN_FILTER_LINEAR_MIP_NEAREST (6  <<  1)
+#       define R200_MIN_FILTER_LINEAR_MIP_LINEAR (7  <<  1)
+#       define R200_MIN_FILTER_ANISO_NEAREST	(8  <<  1)
+#       define R200_MIN_FILTER_ANISO_LINEAR	(9  <<  1)
+#       define R200_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST (10 <<  1)
+#       define R200_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR (11 <<  1)
+#       define R200_MIN_FILTER_MASK		(15 <<  1)
+#       define R200_MAX_ANISO_1_TO_1		(0  <<  5)
+#       define R200_MAX_ANISO_2_TO_1		(1  <<  5)
+#       define R200_MAX_ANISO_4_TO_1		(2  <<  5)
+#       define R200_MAX_ANISO_8_TO_1		(3  <<  5)
+#       define R200_MAX_ANISO_16_TO_1		(4  <<  5)
+#       define R200_MAX_ANISO_MASK		(7  <<  5)
+#       define R200_MAX_MIP_LEVEL_MASK		(0x0f << 16)
+#       define R200_MAX_MIP_LEVEL_SHIFT		16
+#       define R200_YUV_TO_RGB			(1  << 20)
+#       define R200_YUV_TEMPERATURE_COOL	(0  << 21)
+#       define R200_YUV_TEMPERATURE_HOT		(1  << 21)
+#       define R200_YUV_TEMPERATURE_MASK	(1  << 21)
+#       define R200_WRAPEN_S			(1  << 22)
+#       define R200_CLAMP_S_WRAP		(0  << 23)
+#       define R200_CLAMP_S_MIRROR		(1  << 23)
+#       define R200_CLAMP_S_CLAMP_LAST		(2  << 23)
+#       define R200_CLAMP_S_MIRROR_CLAMP_LAST	(3  << 23)
+#       define R200_CLAMP_S_CLAMP_BORDER	(4  << 23)
+#       define R200_CLAMP_S_MIRROR_CLAMP_BORDER	(5  << 23)
+#       define R200_CLAMP_S_CLAMP_GL		(6  << 23)
+#       define R200_CLAMP_S_MIRROR_CLAMP_GL	(7  << 23)
+#       define R200_CLAMP_S_MASK		(7  << 23)
+#       define R200_WRAPEN_T			(1  << 26)
+#       define R200_CLAMP_T_WRAP		(0  << 27)
+#       define R200_CLAMP_T_MIRROR		(1  << 27)
+#       define R200_CLAMP_T_CLAMP_LAST		(2  << 27)
+#       define R200_CLAMP_T_MIRROR_CLAMP_LAST	(3  << 27)
+#       define R200_CLAMP_T_CLAMP_BORDER	(4  << 27)
+#       define R200_CLAMP_T_MIRROR_CLAMP_BORDER	(5  << 27)
+#       define R200_CLAMP_T_CLAMP_GL		(6  << 27)
+#       define R200_CLAMP_T_MIRROR_CLAMP_GL	(7  << 27)
+#       define R200_CLAMP_T_MASK		(7  << 27)
+#       define R200_KILL_LT_ZERO		(1  << 30)
+#       define R200_BORDER_MODE_OGL		(0  << 31)
+#       define R200_BORDER_MODE_D3D		(1  << 31)
+#define R200_PP_TXFORMAT_0			0x2c04
+#define R200_PP_TXFORMAT_1			0x2c24
+#define R200_PP_TXFORMAT_2			0x2c44
+#define R200_PP_TXFORMAT_3			0x2c64
+#define R200_PP_TXFORMAT_4			0x2c84
+#define R200_PP_TXFORMAT_5			0x2ca4
+#       define R200_TXFORMAT_I8			(0 << 0)
+#       define R200_TXFORMAT_AI88		(1 << 0)
+#       define R200_TXFORMAT_RGB332		(2 << 0)
+#       define R200_TXFORMAT_ARGB1555		(3 << 0)
+#       define R200_TXFORMAT_RGB565		(4 << 0)
+#       define R200_TXFORMAT_ARGB4444		(5 << 0)
+#       define R200_TXFORMAT_ARGB8888		(6 << 0)
+#       define R200_TXFORMAT_RGBA8888		(7 << 0)
+#       define R200_TXFORMAT_Y8			(8 << 0)
+#       define R200_TXFORMAT_AVYU4444		(9 << 0)
+#       define R200_TXFORMAT_VYUY422		(10 << 0)
+#       define R200_TXFORMAT_YVYU422		(11 << 0)
+#       define R200_TXFORMAT_DXT1		(12 << 0)
+#       define R200_TXFORMAT_DXT23		(14 << 0)
+#       define R200_TXFORMAT_DXT45		(15 << 0)
+#       define R200_TXFORMAT_ABGR8888		(22 << 0)
+#       define R200_TXFORMAT_FORMAT_MASK	(31 <<	0)
+#       define R200_TXFORMAT_FORMAT_SHIFT	0
+#       define R200_TXFORMAT_ALPHA_IN_MAP	(1 << 6)
+#       define R200_TXFORMAT_NON_POWER2		(1 << 7)
+#       define R200_TXFORMAT_WIDTH_MASK		(15 <<	8)
+#       define R200_TXFORMAT_WIDTH_SHIFT	8
+#       define R200_TXFORMAT_HEIGHT_MASK	(15 << 12)
+#       define R200_TXFORMAT_HEIGHT_SHIFT	12
+#       define R200_TXFORMAT_F5_WIDTH_MASK	(15 << 16)	/* cube face 5 */
+#       define R200_TXFORMAT_F5_WIDTH_SHIFT	16
+#       define R200_TXFORMAT_F5_HEIGHT_MASK	(15 << 20)
+#       define R200_TXFORMAT_F5_HEIGHT_SHIFT	20
+#       define R200_TXFORMAT_ST_ROUTE_STQ0	(0 << 24)
+#       define R200_TXFORMAT_ST_ROUTE_STQ1	(1 << 24)
+#       define R200_TXFORMAT_ST_ROUTE_STQ2	(2 << 24)
+#       define R200_TXFORMAT_ST_ROUTE_STQ3	(3 << 24)
+#       define R200_TXFORMAT_ST_ROUTE_STQ4	(4 << 24)
+#       define R200_TXFORMAT_ST_ROUTE_STQ5	(5 << 24)
+#       define R200_TXFORMAT_ST_ROUTE_MASK	(7 << 24)
+#       define R200_TXFORMAT_ST_ROUTE_SHIFT	24
+#       define R200_TXFORMAT_ALPHA_MASK_ENABLE	(1 << 28)
+#       define R200_TXFORMAT_CHROMA_KEY_ENABLE	(1 << 29)
+#       define R200_TXFORMAT_CUBIC_MAP_ENABLE		(1 << 30)
+#define R200_PP_TXFORMAT_X_0                    0x2c08
+#define R200_PP_TXFORMAT_X_1                    0x2c28
+#define R200_PP_TXFORMAT_X_2                    0x2c48
+#define R200_PP_TXFORMAT_X_3                    0x2c68
+#define R200_PP_TXFORMAT_X_4                    0x2c88
+#define R200_PP_TXFORMAT_X_5                    0x2ca8
+
+#define R200_PP_TXSIZE_0			0x2c0c /* NPOT only */
+#define R200_PP_TXSIZE_1			0x2c2c /* NPOT only */
+#define R200_PP_TXSIZE_2			0x2c4c /* NPOT only */
+#define R200_PP_TXSIZE_3			0x2c6c /* NPOT only */
+#define R200_PP_TXSIZE_4			0x2c8c /* NPOT only */
+#define R200_PP_TXSIZE_5			0x2cac /* NPOT only */
+
+#define R200_PP_TXPITCH_0                       0x2c10 /* NPOT only */
+#define R200_PP_TXPITCH_1			0x2c30 /* NPOT only */
+#define R200_PP_TXPITCH_2			0x2c50 /* NPOT only */
+#define R200_PP_TXPITCH_3			0x2c70 /* NPOT only */
+#define R200_PP_TXPITCH_4			0x2c90 /* NPOT only */
+#define R200_PP_TXPITCH_5			0x2cb0 /* NPOT only */
+
+#define R200_PP_TXOFFSET_0			0x2d00
+#       define R200_TXO_ENDIAN_NO_SWAP		(0 << 0)
+#       define R200_TXO_ENDIAN_BYTE_SWAP	(1 << 0)
+#       define R200_TXO_ENDIAN_WORD_SWAP	(2 << 0)
+#       define R200_TXO_ENDIAN_HALFDW_SWAP	(3 << 0)
+#       define R200_TXO_MACRO_LINEAR		(0 << 2)
+#       define R200_TXO_MACRO_TILE		(1 << 2)
+#       define R200_TXO_MICRO_LINEAR		(0 << 3)
+#       define R200_TXO_MICRO_TILE		(1 << 3)
+#       define R200_TXO_OFFSET_MASK		0xffffffe0
+#       define R200_TXO_OFFSET_SHIFT		5
+#define R200_PP_TXOFFSET_1			0x2d18
+#define R200_PP_TXOFFSET_2			0x2d30
+#define R200_PP_TXOFFSET_3			0x2d48
+#define R200_PP_TXOFFSET_4			0x2d60
+#define R200_PP_TXOFFSET_5			0x2d78
+
+#define R200_PP_TFACTOR_0			0x2ee0
+#define R200_PP_TFACTOR_1			0x2ee4
+#define R200_PP_TFACTOR_2			0x2ee8
+#define R200_PP_TFACTOR_3			0x2eec
+#define R200_PP_TFACTOR_4			0x2ef0
+#define R200_PP_TFACTOR_5			0x2ef4
+
+#define R200_PP_TXCBLEND_0			0x2f00
+#       define R200_TXC_ARG_A_ZERO		(0)
+#       define R200_TXC_ARG_A_CURRENT_COLOR	(2)
+#       define R200_TXC_ARG_A_CURRENT_ALPHA	(3)
+#       define R200_TXC_ARG_A_DIFFUSE_COLOR	(4)
+#       define R200_TXC_ARG_A_DIFFUSE_ALPHA	(5)
+#       define R200_TXC_ARG_A_SPECULAR_COLOR	(6)
+#       define R200_TXC_ARG_A_SPECULAR_ALPHA	(7)
+#       define R200_TXC_ARG_A_TFACTOR_COLOR	(8)
+#       define R200_TXC_ARG_A_TFACTOR_ALPHA	(9)
+#       define R200_TXC_ARG_A_R0_COLOR		(10)
+#       define R200_TXC_ARG_A_R0_ALPHA		(11)
+#       define R200_TXC_ARG_A_R1_COLOR		(12)
+#       define R200_TXC_ARG_A_R1_ALPHA		(13)
+#       define R200_TXC_ARG_A_R2_COLOR		(14)
+#       define R200_TXC_ARG_A_R2_ALPHA		(15)
+#       define R200_TXC_ARG_A_R3_COLOR		(16)
+#       define R200_TXC_ARG_A_R3_ALPHA		(17)
+#       define R200_TXC_ARG_A_R4_COLOR		(18)
+#       define R200_TXC_ARG_A_R4_ALPHA		(19)
+#       define R200_TXC_ARG_A_R5_COLOR		(20)
+#       define R200_TXC_ARG_A_R5_ALPHA		(21)
+#       define R200_TXC_ARG_A_TFACTOR1_COLOR	(26)
+#       define R200_TXC_ARG_A_TFACTOR1_ALPHA	(27)
+#       define R200_TXC_ARG_A_MASK		(31 << 0)
+#       define R200_TXC_ARG_A_SHIFT		0
+#       define R200_TXC_ARG_B_ZERO		(0 << 5)
+#       define R200_TXC_ARG_B_CURRENT_COLOR	(2 << 5)
+#       define R200_TXC_ARG_B_CURRENT_ALPHA	(3 << 5)
+#       define R200_TXC_ARG_B_DIFFUSE_COLOR	(4 << 5)
+#       define R200_TXC_ARG_B_DIFFUSE_ALPHA	(5 << 5)
+#       define R200_TXC_ARG_B_SPECULAR_COLOR	(6 << 5)
+#       define R200_TXC_ARG_B_SPECULAR_ALPHA	(7 << 5)
+#       define R200_TXC_ARG_B_TFACTOR_COLOR	(8 << 5)
+#       define R200_TXC_ARG_B_TFACTOR_ALPHA	(9 << 5)
+#       define R200_TXC_ARG_B_R0_COLOR		(10 << 5)
+#       define R200_TXC_ARG_B_R0_ALPHA		(11 << 5)
+#       define R200_TXC_ARG_B_R1_COLOR		(12 << 5)
+#       define R200_TXC_ARG_B_R1_ALPHA		(13 << 5)
+#       define R200_TXC_ARG_B_R2_COLOR		(14 << 5)
+#       define R200_TXC_ARG_B_R2_ALPHA		(15 << 5)
+#       define R200_TXC_ARG_B_R3_COLOR		(16 << 5)
+#       define R200_TXC_ARG_B_R3_ALPHA		(17 << 5)
+#       define R200_TXC_ARG_B_R4_COLOR		(18 << 5)
+#       define R200_TXC_ARG_B_R4_ALPHA		(19 << 5)
+#       define R200_TXC_ARG_B_R5_COLOR		(20 << 5)
+#       define R200_TXC_ARG_B_R5_ALPHA		(21 << 5)
+#       define R200_TXC_ARG_B_TFACTOR1_COLOR	(26 << 5)
+#       define R200_TXC_ARG_B_TFACTOR1_ALPHA	(27 << 5)
+#       define R200_TXC_ARG_B_MASK		(31 << 5)
+#       define R200_TXC_ARG_B_SHIFT		5
+#       define R200_TXC_ARG_C_ZERO		(0 << 10)
+#       define R200_TXC_ARG_C_CURRENT_COLOR	(2 << 10)
+#       define R200_TXC_ARG_C_CURRENT_ALPHA	(3 << 10)
+#       define R200_TXC_ARG_C_DIFFUSE_COLOR	(4 << 10)
+#       define R200_TXC_ARG_C_DIFFUSE_ALPHA	(5 << 10)
+#       define R200_TXC_ARG_C_SPECULAR_COLOR	(6 << 10)
+#       define R200_TXC_ARG_C_SPECULAR_ALPHA	(7 << 10)
+#       define R200_TXC_ARG_C_TFACTOR_COLOR	(8 << 10)
+#       define R200_TXC_ARG_C_TFACTOR_ALPHA	(9 << 10)
+#       define R200_TXC_ARG_C_R0_COLOR		(10 << 10)
+#       define R200_TXC_ARG_C_R0_ALPHA		(11 << 10)
+#       define R200_TXC_ARG_C_R1_COLOR		(12 << 10)
+#       define R200_TXC_ARG_C_R1_ALPHA		(13 << 10)
+#       define R200_TXC_ARG_C_R2_COLOR		(14 << 10)
+#       define R200_TXC_ARG_C_R2_ALPHA		(15 << 10)
+#       define R200_TXC_ARG_C_R3_COLOR		(16 << 10)
+#       define R200_TXC_ARG_C_R3_ALPHA		(17 << 10)
+#       define R200_TXC_ARG_C_R4_COLOR		(18 << 10)
+#       define R200_TXC_ARG_C_R4_ALPHA		(19 << 10)
+#       define R200_TXC_ARG_C_R5_COLOR		(20 << 10)
+#       define R200_TXC_ARG_C_R5_ALPHA		(21 << 10)
+#       define R200_TXC_ARG_C_TFACTOR1_COLOR	(26 << 10)
+#       define R200_TXC_ARG_C_TFACTOR1_ALPHA	(27 << 10)
+#       define R200_TXC_ARG_C_MASK		(31 << 10)
+#       define R200_TXC_ARG_C_SHIFT		10
+#       define R200_TXC_COMP_ARG_A		(1 << 16)
+#       define R200_TXC_COMP_ARG_A_SHIFT	(16)
+#       define R200_TXC_BIAS_ARG_A		(1 << 17)
+#       define R200_TXC_SCALE_ARG_A		(1 << 18)
+#       define R200_TXC_NEG_ARG_A		(1 << 19)
+#       define R200_TXC_COMP_ARG_B		(1 << 20)
+#       define R200_TXC_COMP_ARG_B_SHIFT	(20)
+#       define R200_TXC_BIAS_ARG_B		(1 << 21)
+#       define R200_TXC_SCALE_ARG_B		(1 << 22)
+#       define R200_TXC_NEG_ARG_B		(1 << 23)
+#       define R200_TXC_COMP_ARG_C		(1 << 24)
+#       define R200_TXC_COMP_ARG_C_SHIFT	(24)
+#       define R200_TXC_BIAS_ARG_C		(1 << 25)
+#       define R200_TXC_SCALE_ARG_C		(1 << 26)
+#       define R200_TXC_NEG_ARG_C		(1 << 27)
+#       define R200_TXC_OP_MADD			(0 << 28)
+#       define R200_TXC_OP_CND0			(2 << 28)
+#       define R200_TXC_OP_LERP			(3 << 28)
+#       define R200_TXC_OP_DOT3			(4 << 28)
+#       define R200_TXC_OP_DOT4			(5 << 28)
+#       define R200_TXC_OP_CONDITIONAL		(6 << 28)
+#       define R200_TXC_OP_DOT2_ADD		(7 << 28)
+#       define R200_TXC_OP_MASK			(7 << 28)
+#define R200_PP_TXCBLEND2_0		0x2f04
+#       define R200_TXC_TFACTOR_SEL_SHIFT	0
+#       define R200_TXC_TFACTOR_SEL_MASK	0x7
+#       define R200_TXC_TFACTOR1_SEL_SHIFT	4
+#       define R200_TXC_TFACTOR1_SEL_MASK	(0x7 << 4)
+#       define R200_TXC_SCALE_SHIFT		8
+#       define R200_TXC_SCALE_MASK		(7 << 8)
+#       define R200_TXC_SCALE_1X		(0 << 8)
+#       define R200_TXC_SCALE_2X		(1 << 8)
+#       define R200_TXC_SCALE_4X		(2 << 8)
+#       define R200_TXC_SCALE_8X		(3 << 8)
+#       define R200_TXC_SCALE_INV2		(5 << 8)
+#       define R200_TXC_SCALE_INV4		(6 << 8)
+#       define R200_TXC_SCALE_INV8		(7 << 8)
+#       define R200_TXC_CLAMP_SHIFT		12
+#       define R200_TXC_CLAMP_MASK		(3 << 12)
+#       define R200_TXC_CLAMP_WRAP		(0 << 12)
+#       define R200_TXC_CLAMP_0_1		(1 << 12)
+#       define R200_TXC_CLAMP_8_8		(2 << 12)
+#       define R200_TXC_OUTPUT_REG_MASK		(7 << 16)
+#       define R200_TXC_OUTPUT_REG_NONE		(0 << 16)
+#       define R200_TXC_OUTPUT_REG_R0		(1 << 16)
+#       define R200_TXC_OUTPUT_REG_R1		(2 << 16)
+#       define R200_TXC_OUTPUT_REG_R2		(3 << 16)
+#       define R200_TXC_OUTPUT_REG_R3		(4 << 16)
+#       define R200_TXC_OUTPUT_REG_R4		(5 << 16)
+#       define R200_TXC_OUTPUT_REG_R5		(6 << 16)
+#       define R200_TXC_OUTPUT_MASK_MASK	(7 << 20)
+#       define R200_TXC_OUTPUT_MASK_RGB		(0 << 20)
+#       define R200_TXC_OUTPUT_MASK_RG		(1 << 20)
+#       define R200_TXC_OUTPUT_MASK_RB		(2 << 20)
+#       define R200_TXC_OUTPUT_MASK_R		(3 << 20)
+#       define R200_TXC_OUTPUT_MASK_GB		(4 << 20)
+#       define R200_TXC_OUTPUT_MASK_G		(5 << 20)
+#       define R200_TXC_OUTPUT_MASK_B		(6 << 20)
+#       define R200_TXC_OUTPUT_MASK_NONE	(7 << 20)
+#       define R200_TXC_REPL_NORMAL		0
+#       define R200_TXC_REPL_RED		1
+#       define R200_TXC_REPL_GREEN		2
+#       define R200_TXC_REPL_BLUE		3
+#       define R200_TXC_REPL_ARG_A_SHIFT	26
+#       define R200_TXC_REPL_ARG_A_MASK		(3 << 26)
+#       define R200_TXC_REPL_ARG_B_SHIFT	28
+#       define R200_TXC_REPL_ARG_B_MASK		(3 << 28)
+#       define R200_TXC_REPL_ARG_C_SHIFT	30
+#       define R200_TXC_REPL_ARG_C_MASK		(3 << 30)
+#define R200_PP_TXABLEND_0			0x2f08
+#       define R200_TXA_ARG_A_ZERO		(0)
+#       define R200_TXA_ARG_A_CURRENT_ALPHA	(2) /* guess */
+#       define R200_TXA_ARG_A_CURRENT_BLUE	(3) /* guess */
+#       define R200_TXA_ARG_A_DIFFUSE_ALPHA	(4)
+#       define R200_TXA_ARG_A_DIFFUSE_BLUE	(5)
+#       define R200_TXA_ARG_A_SPECULAR_ALPHA	(6)
+#       define R200_TXA_ARG_A_SPECULAR_BLUE	(7)
+#       define R200_TXA_ARG_A_TFACTOR_ALPHA	(8)
+#       define R200_TXA_ARG_A_TFACTOR_BLUE	(9)
+#       define R200_TXA_ARG_A_R0_ALPHA		(10)
+#       define R200_TXA_ARG_A_R0_BLUE		(11)
+#       define R200_TXA_ARG_A_R1_ALPHA		(12)
+#       define R200_TXA_ARG_A_R1_BLUE		(13)
+#       define R200_TXA_ARG_A_R2_ALPHA		(14)
+#       define R200_TXA_ARG_A_R2_BLUE		(15)
+#       define R200_TXA_ARG_A_R3_ALPHA		(16)
+#       define R200_TXA_ARG_A_R3_BLUE		(17)
+#       define R200_TXA_ARG_A_R4_ALPHA		(18)
+#       define R200_TXA_ARG_A_R4_BLUE		(19)
+#       define R200_TXA_ARG_A_R5_ALPHA		(20)
+#       define R200_TXA_ARG_A_R5_BLUE		(21)
+#       define R200_TXA_ARG_A_TFACTOR1_ALPHA	(26)
+#       define R200_TXA_ARG_A_TFACTOR1_BLUE	(27)
+#       define R200_TXA_ARG_A_MASK		(31 << 0)
+#       define R200_TXA_ARG_A_SHIFT		0
+#       define R200_TXA_ARG_B_ZERO		(0 << 5)
+#       define R200_TXA_ARG_B_CURRENT_ALPHA	(2 << 5) /* guess */
+#       define R200_TXA_ARG_B_CURRENT_BLUE	(3 << 5) /* guess */
+#       define R200_TXA_ARG_B_DIFFUSE_ALPHA	(4 << 5)
+#       define R200_TXA_ARG_B_DIFFUSE_BLUE	(5 << 5)
+#       define R200_TXA_ARG_B_SPECULAR_ALPHA	(6 << 5)
+#       define R200_TXA_ARG_B_SPECULAR_BLUE	(7 << 5)
+#       define R200_TXA_ARG_B_TFACTOR_ALPHA	(8 << 5)
+#       define R200_TXA_ARG_B_TFACTOR_BLUE	(9 << 5)
+#       define R200_TXA_ARG_B_R0_ALPHA		(10 << 5)
+#       define R200_TXA_ARG_B_R0_BLUE		(11 << 5)
+#       define R200_TXA_ARG_B_R1_ALPHA		(12 << 5)
+#       define R200_TXA_ARG_B_R1_BLUE		(13 << 5)
+#       define R200_TXA_ARG_B_R2_ALPHA		(14 << 5)
+#       define R200_TXA_ARG_B_R2_BLUE		(15 << 5)
+#       define R200_TXA_ARG_B_R3_ALPHA		(16 << 5)
+#       define R200_TXA_ARG_B_R3_BLUE		(17 << 5)
+#       define R200_TXA_ARG_B_R4_ALPHA		(18 << 5)
+#       define R200_TXA_ARG_B_R4_BLUE		(19 << 5)
+#       define R200_TXA_ARG_B_R5_ALPHA		(20 << 5)
+#       define R200_TXA_ARG_B_R5_BLUE		(21 << 5)
+#       define R200_TXA_ARG_B_TFACTOR1_ALPHA	(26 << 5)
+#       define R200_TXA_ARG_B_TFACTOR1_BLUE	(27 << 5)
+#       define R200_TXA_ARG_B_MASK		(31 << 5)
+#       define R200_TXA_ARG_B_SHIFT			5
+#       define R200_TXA_ARG_C_ZERO		(0 << 10)
+#       define R200_TXA_ARG_C_CURRENT_ALPHA	(2 << 10) /* guess */
+#       define R200_TXA_ARG_C_CURRENT_BLUE	(3 << 10) /* guess */
+#       define R200_TXA_ARG_C_DIFFUSE_ALPHA	(4 << 10)
+#       define R200_TXA_ARG_C_DIFFUSE_BLUE	(5 << 10)
+#       define R200_TXA_ARG_C_SPECULAR_ALPHA	(6 << 10)
+#       define R200_TXA_ARG_C_SPECULAR_BLUE	(7 << 10)
+#       define R200_TXA_ARG_C_TFACTOR_ALPHA	(8 << 10)
+#       define R200_TXA_ARG_C_TFACTOR_BLUE	(9 << 10)
+#       define R200_TXA_ARG_C_R0_ALPHA		(10 << 10)
+#       define R200_TXA_ARG_C_R0_BLUE		(11 << 10)
+#       define R200_TXA_ARG_C_R1_ALPHA		(12 << 10)
+#       define R200_TXA_ARG_C_R1_BLUE		(13 << 10)
+#       define R200_TXA_ARG_C_R2_ALPHA		(14 << 10)
+#       define R200_TXA_ARG_C_R2_BLUE		(15 << 10)
+#       define R200_TXA_ARG_C_R3_ALPHA		(16 << 10)
+#       define R200_TXA_ARG_C_R3_BLUE		(17 << 10)
+#       define R200_TXA_ARG_C_R4_ALPHA		(18 << 10)
+#       define R200_TXA_ARG_C_R4_BLUE		(19 << 10)
+#       define R200_TXA_ARG_C_R5_ALPHA		(20 << 10)
+#       define R200_TXA_ARG_C_R5_BLUE		(21 << 10)
+#       define R200_TXA_ARG_C_TFACTOR1_ALPHA	(26 << 10)
+#       define R200_TXA_ARG_C_TFACTOR1_BLUE	(27 << 10)
+#       define R200_TXA_ARG_C_MASK		(31 << 10)
+#       define R200_TXA_ARG_C_SHIFT		10
+#       define R200_TXA_COMP_ARG_A		(1 << 16)
+#       define R200_TXA_COMP_ARG_A_SHIFT	(16)
+#       define R200_TXA_BIAS_ARG_A		(1 << 17)
+#       define R200_TXA_SCALE_ARG_A		(1 << 18)
+#       define R200_TXA_NEG_ARG_A		(1 << 19)
+#       define R200_TXA_COMP_ARG_B		(1 << 20)
+#       define R200_TXA_COMP_ARG_B_SHIFT	(20)
+#       define R200_TXA_BIAS_ARG_B		(1 << 21)
+#       define R200_TXA_SCALE_ARG_B		(1 << 22)
+#       define R200_TXA_NEG_ARG_B		(1 << 23)
+#       define R200_TXA_COMP_ARG_C		(1 << 24)
+#       define R200_TXA_COMP_ARG_C_SHIFT	(24)
+#       define R200_TXA_BIAS_ARG_C		(1 << 25)
+#       define R200_TXA_SCALE_ARG_C		(1 << 26)
+#       define R200_TXA_NEG_ARG_C		(1 << 27)
+#       define R200_TXA_OP_MADD			(0 << 28)
+#       define R200_TXA_OP_CND0			(2 << 28)
+#       define R200_TXA_OP_LERP			(3 << 28)
+#       define R200_TXA_OP_CONDITIONAL		(6 << 28)
+#       define R200_TXA_OP_MASK			(7 << 28)
+#define R200_PP_TXABLEND2_0			0x2f0c
+#       define R200_TXA_TFACTOR_SEL_SHIFT	0
+#       define R200_TXA_TFACTOR_SEL_MASK	0x7
+#       define R200_TXA_TFACTOR1_SEL_SHIFT	4
+#       define R200_TXA_TFACTOR1_SEL_MASK	(0x7 << 4)
+#       define R200_TXA_SCALE_SHIFT		8
+#       define R200_TXA_SCALE_MASK		(7 << 8)
+#       define R200_TXA_SCALE_1X		(0 << 8)
+#       define R200_TXA_SCALE_2X		(1 << 8)
+#       define R200_TXA_SCALE_4X		(2 << 8)
+#       define R200_TXA_SCALE_8X		(3 << 8)
+#       define R200_TXA_SCALE_INV2		(5 << 8)
+#       define R200_TXA_SCALE_INV4		(6 << 8)
+#       define R200_TXA_SCALE_INV8		(7 << 8)
+#       define R200_TXA_CLAMP_SHIFT		12
+#       define R200_TXA_CLAMP_MASK		(3 << 12)
+#       define R200_TXA_CLAMP_WRAP		(0 << 12)
+#       define R200_TXA_CLAMP_0_1		(1 << 12)
+#       define R200_TXA_CLAMP_8_8		(2 << 12)
+#       define R200_TXA_OUTPUT_REG_MASK		(7 << 16)
+#       define R200_TXA_OUTPUT_REG_NONE		(0 << 16)
+#       define R200_TXA_OUTPUT_REG_R0		(1 << 16)
+#       define R200_TXA_OUTPUT_REG_R1		(2 << 16)
+#       define R200_TXA_OUTPUT_REG_R2		(3 << 16)
+#       define R200_TXA_OUTPUT_REG_R3		(4 << 16)
+#       define R200_TXA_OUTPUT_REG_R4		(5 << 16)
+#       define R200_TXA_OUTPUT_REG_R5		(6 << 16)
+#       define R200_TXA_DOT_ALPHA		(1 << 20)
+#       define R200_TXA_REPL_NORMAL		0
+#       define R200_TXA_REPL_RED		1
+#       define R200_TXA_REPL_GREEN		2
+#       define R200_TXA_REPL_ARG_A_SHIFT	26
+#       define R200_TXA_REPL_ARG_A_MASK		(3 << 26)
+#       define R200_TXA_REPL_ARG_B_SHIFT	28
+#       define R200_TXA_REPL_ARG_B_MASK		(3 << 28)
+#       define R200_TXA_REPL_ARG_C_SHIFT	30
+#       define R200_TXA_REPL_ARG_C_MASK		(3 << 30)
+
+#define R200_SE_VTX_FMT_0			0x2088
+#       define R200_VTX_XY			0 /* always have xy */
+#       define R200_VTX_Z0			(1<<0)
+#       define R200_VTX_W0			(1<<1)
+#       define R200_VTX_WEIGHT_COUNT_SHIFT	(2)
+#       define R200_VTX_PV_MATRIX_SEL		(1<<5)
+#       define R200_VTX_N0			(1<<6)
+#       define R200_VTX_POINT_SIZE		(1<<7)
+#       define R200_VTX_DISCRETE_FOG		(1<<8)
+#       define R200_VTX_SHININESS_0		(1<<9)
+#       define R200_VTX_SHININESS_1		(1<<10)
+#       define   R200_VTX_COLOR_NOT_PRESENT	0
+#       define   R200_VTX_PK_RGBA		1
+#       define   R200_VTX_FP_RGB		2
+#       define   R200_VTX_FP_RGBA		3
+#       define   R200_VTX_COLOR_MASK		3
+#       define R200_VTX_COLOR_0_SHIFT		11
+#       define R200_VTX_COLOR_1_SHIFT		13
+#       define R200_VTX_COLOR_2_SHIFT		15
+#       define R200_VTX_COLOR_3_SHIFT		17
+#       define R200_VTX_COLOR_4_SHIFT		19
+#       define R200_VTX_COLOR_5_SHIFT		21
+#       define R200_VTX_COLOR_6_SHIFT		23
+#       define R200_VTX_COLOR_7_SHIFT		25
+#       define R200_VTX_XY1			(1<<28)
+#       define R200_VTX_Z1			(1<<29)
+#       define R200_VTX_W1			(1<<30)
+#       define R200_VTX_N1			(1<<31)
+#define R200_SE_VTX_FMT_1			0x208c
+#       define R200_VTX_TEX0_COMP_CNT_SHIFT	0
+#       define R200_VTX_TEX1_COMP_CNT_SHIFT	3
+#       define R200_VTX_TEX2_COMP_CNT_SHIFT	6
+#       define R200_VTX_TEX3_COMP_CNT_SHIFT	9
+#       define R200_VTX_TEX4_COMP_CNT_SHIFT	12
+#       define R200_VTX_TEX5_COMP_CNT_SHIFT	15
+
+#define R200_SE_TCL_OUTPUT_VTX_FMT_0		0x2090
+#define R200_SE_TCL_OUTPUT_VTX_FMT_1		0x2094
+#define R200_SE_TCL_OUTPUT_VTX_COMP_SEL		0x2250
+#       define R200_OUTPUT_XYZW			(1<<0)
+#       define R200_OUTPUT_COLOR_0		(1<<8)
+#       define R200_OUTPUT_COLOR_1		(1<<9)
+#       define R200_OUTPUT_TEX_0		(1<<16)
+#       define R200_OUTPUT_TEX_1		(1<<17)
+#       define R200_OUTPUT_TEX_2		(1<<18)
+#       define R200_OUTPUT_TEX_3		(1<<19)
+#       define R200_OUTPUT_TEX_4		(1<<20)
+#       define R200_OUTPUT_TEX_5		(1<<21)
+#       define R200_OUTPUT_TEX_MASK		(0x3f<<16)
+#       define R200_OUTPUT_DISCRETE_FOG		(1<<24)
+#       define R200_OUTPUT_PT_SIZE		(1<<25)
+#       define R200_FORCE_INORDER_PROC		(1<<31)
+#define R200_PP_CNTL_X				0x2cc4
+#define R200_PP_TXMULTI_CTL_0			0x2c1c
+#define R200_SE_VTX_STATE_CNTL			0x2180
+#       define R200_UPDATE_USER_COLOR_0_ENA_MASK (1<<16)
+
+				/* Registers for CP and Microcode Engine */
+#define RADEON_CP_ME_RAM_ADDR               0x07d4
+#define RADEON_CP_ME_RAM_RADDR              0x07d8
+#define RADEON_CP_ME_RAM_DATAH              0x07dc
+#define RADEON_CP_ME_RAM_DATAL              0x07e0
+
+#define RADEON_CP_RB_BASE                   0x0700
+#define RADEON_CP_RB_CNTL                   0x0704
+#	define RADEON_RB_BUFSZ_SHIFT		0
+#	define RADEON_RB_BUFSZ_MASK		(0x3f << 0)
+#	define RADEON_RB_BLKSZ_SHIFT		8
+#	define RADEON_RB_BLKSZ_MASK		(0x3f << 8)
+#	define RADEON_MAX_FETCH_SHIFT		18
+#	define RADEON_MAX_FETCH_MASK		(0x3 << 18)
+#	define RADEON_RB_NO_UPDATE		(1 << 27)
+#	define RADEON_RB_RPTR_WR_ENA		(1 << 31)
+#define RADEON_CP_RB_RPTR_ADDR              0x070c
+#define RADEON_CP_RB_RPTR                   0x0710
+#define RADEON_CP_RB_WPTR                   0x0714
+#define RADEON_CP_RB_RPTR_WR                0x071c
+
+#define RADEON_CP_IB_BASE                   0x0738
+#define RADEON_CP_IB_BUFSZ                  0x073c
+
+#define RADEON_CP_CSQ_CNTL                  0x0740
+#       define RADEON_CSQ_CNT_PRIMARY_MASK     (0xff << 0)
+#       define RADEON_CSQ_PRIDIS_INDDIS        (0    << 28)
+#       define RADEON_CSQ_PRIPIO_INDDIS        (1    << 28)
+#       define RADEON_CSQ_PRIBM_INDDIS         (2    << 28)
+#       define RADEON_CSQ_PRIPIO_INDBM         (3    << 28)
+#       define RADEON_CSQ_PRIBM_INDBM          (4    << 28)
+#       define RADEON_CSQ_PRIPIO_INDPIO        (15   << 28)
+
+#define R300_CP_RESYNC_ADDR                 0x778
+#define R300_CP_RESYNC_DATA                 0x77c
+
+#define RADEON_CP_CSQ_STAT                  0x07f8
+#       define RADEON_CSQ_RPTR_PRIMARY_MASK    (0xff <<  0)
+#       define RADEON_CSQ_WPTR_PRIMARY_MASK    (0xff <<  8)
+#       define RADEON_CSQ_RPTR_INDIRECT_MASK   (0xff << 16)
+#       define RADEON_CSQ_WPTR_INDIRECT_MASK   (0xff << 24)
+#define RADEON_CP_CSQ2_STAT                  0x07fc
+#define RADEON_CP_CSQ_ADDR                  0x07f0
+#define RADEON_CP_CSQ_DATA                  0x07f4
+#define RADEON_CP_CSQ_APER_PRIMARY          0x1000
+#define RADEON_CP_CSQ_APER_INDIRECT         0x1300
+
+#define RADEON_CP_RB_WPTR_DELAY             0x0718
+#       define RADEON_PRE_WRITE_TIMER_SHIFT    0
+#       define RADEON_PRE_WRITE_LIMIT_SHIFT    23
+#define RADEON_CP_CSQ_MODE		0x0744
+#	define RADEON_INDIRECT2_START_SHIFT	0
+#	define RADEON_INDIRECT2_START_MASK	(0x7f << 0)
+#	define RADEON_INDIRECT1_START_SHIFT	8
+#	define RADEON_INDIRECT1_START_MASK	(0x7f << 8)
+
+#define RADEON_AIC_CNTL                     0x01d0
+#       define RADEON_PCIGART_TRANSLATE_EN     (1 << 0)
+#       define RADEON_DIS_OUT_OF_PCI_GART_ACCESS     (1 << 1)
+#define RADEON_AIC_LO_ADDR                  0x01dc
+#define RADEON_AIC_PT_BASE		0x01d8
+#define RADEON_AIC_HI_ADDR		0x01e0
+
+
+
+				/* Constants */
+/* #define RADEON_LAST_FRAME_REG               RADEON_GUI_SCRATCH_REG0 */
+/* efine RADEON_LAST_CLEAR_REG               RADEON_GUI_SCRATCH_REG2 */
+
+
+
+				/* CP packet types */
+#define RADEON_CP_PACKET0                           0x00000000
+#define RADEON_CP_PACKET1                           0x40000000
+#define RADEON_CP_PACKET2                           0x80000000
+#define RADEON_CP_PACKET3                           0xC0000000
+#       define RADEON_CP_PACKET_MASK                0xC0000000
+#       define RADEON_CP_PACKET_COUNT_MASK          0x3fff0000
+#       define RADEON_CP_PACKET_MAX_DWORDS          (1 << 12)
+#       define RADEON_CP_PACKET0_REG_MASK           0x000007ff
+#       define R300_CP_PACKET0_REG_MASK             0x00001fff
+#       define RADEON_CP_PACKET1_REG0_MASK          0x000007ff
+#       define RADEON_CP_PACKET1_REG1_MASK          0x003ff800
+
+#define RADEON_CP_PACKET0_ONE_REG_WR                0x00008000
+
+#define RADEON_CP_PACKET3_NOP                       0xC0001000
+#define RADEON_CP_PACKET3_NEXT_CHAR                 0xC0001900
+#define RADEON_CP_PACKET3_PLY_NEXTSCAN              0xC0001D00
+#define RADEON_CP_PACKET3_SET_SCISSORS              0xC0001E00
+#define RADEON_CP_PACKET3_3D_RNDR_GEN_INDX_PRIM     0xC0002300
+#define RADEON_CP_PACKET3_LOAD_MICROCODE            0xC0002400
+#define RADEON_CP_PACKET3_WAIT_FOR_IDLE             0xC0002600
+#define RADEON_CP_PACKET3_3D_DRAW_VBUF              0xC0002800
+#define RADEON_CP_PACKET3_3D_DRAW_IMMD              0xC0002900
+#define RADEON_CP_PACKET3_3D_DRAW_INDX              0xC0002A00
+#define RADEON_CP_PACKET3_LOAD_PALETTE              0xC0002C00
+#define R200_CP_PACKET3_3D_DRAW_IMMD_2              0xc0003500
+#define RADEON_CP_PACKET3_3D_LOAD_VBPNTR            0xC0002F00
+#define RADEON_CP_PACKET3_CNTL_PAINT                0xC0009100
+#define RADEON_CP_PACKET3_CNTL_BITBLT               0xC0009200
+#define RADEON_CP_PACKET3_CNTL_SMALLTEXT            0xC0009300
+#define RADEON_CP_PACKET3_CNTL_HOSTDATA_BLT         0xC0009400
+#define RADEON_CP_PACKET3_CNTL_POLYLINE             0xC0009500
+#define RADEON_CP_PACKET3_CNTL_POLYSCANLINES        0xC0009800
+#define RADEON_CP_PACKET3_CNTL_PAINT_MULTI          0xC0009A00
+#define RADEON_CP_PACKET3_CNTL_BITBLT_MULTI         0xC0009B00
+#define RADEON_CP_PACKET3_CNTL_TRANS_BITBLT         0xC0009C00
+
+
+#define RADEON_CP_VC_FRMT_XY                        0x00000000
+#define RADEON_CP_VC_FRMT_W0                        0x00000001
+#define RADEON_CP_VC_FRMT_FPCOLOR                   0x00000002
+#define RADEON_CP_VC_FRMT_FPALPHA                   0x00000004
+#define RADEON_CP_VC_FRMT_PKCOLOR                   0x00000008
+#define RADEON_CP_VC_FRMT_FPSPEC                    0x00000010
+#define RADEON_CP_VC_FRMT_FPFOG                     0x00000020
+#define RADEON_CP_VC_FRMT_PKSPEC                    0x00000040
+#define RADEON_CP_VC_FRMT_ST0                       0x00000080
+#define RADEON_CP_VC_FRMT_ST1                       0x00000100
+#define RADEON_CP_VC_FRMT_Q1                        0x00000200
+#define RADEON_CP_VC_FRMT_ST2                       0x00000400
+#define RADEON_CP_VC_FRMT_Q2                        0x00000800
+#define RADEON_CP_VC_FRMT_ST3                       0x00001000
+#define RADEON_CP_VC_FRMT_Q3                        0x00002000
+#define RADEON_CP_VC_FRMT_Q0                        0x00004000
+#define RADEON_CP_VC_FRMT_BLND_WEIGHT_CNT_MASK      0x00038000
+#define RADEON_CP_VC_FRMT_N0                        0x00040000
+#define RADEON_CP_VC_FRMT_XY1                       0x08000000
+#define RADEON_CP_VC_FRMT_Z1                        0x10000000
+#define RADEON_CP_VC_FRMT_W1                        0x20000000
+#define RADEON_CP_VC_FRMT_N1                        0x40000000
+#define RADEON_CP_VC_FRMT_Z                         0x80000000
+
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_NONE            0x00000000
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_POINT           0x00000001
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_LINE            0x00000002
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_LINE_STRIP      0x00000003
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_TRI_LIST        0x00000004
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_TRI_FAN         0x00000005
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_TRI_STRIP       0x00000006
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_TRI_TYPE_2      0x00000007
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_RECT_LIST       0x00000008
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_3VRT_POINT_LIST 0x00000009
+#define RADEON_CP_VC_CNTL_PRIM_TYPE_3VRT_LINE_LIST  0x0000000a
+#define RADEON_CP_VC_CNTL_PRIM_WALK_IND             0x00000010
+#define RADEON_CP_VC_CNTL_PRIM_WALK_LIST            0x00000020
+#define RADEON_CP_VC_CNTL_PRIM_WALK_RING            0x00000030
+#define RADEON_CP_VC_CNTL_COLOR_ORDER_BGRA          0x00000000
+#define RADEON_CP_VC_CNTL_COLOR_ORDER_RGBA          0x00000040
+#define RADEON_CP_VC_CNTL_MAOS_ENABLE               0x00000080
+#define RADEON_CP_VC_CNTL_VTX_FMT_NON_RADEON_MODE   0x00000000
+#define RADEON_CP_VC_CNTL_VTX_FMT_RADEON_MODE       0x00000100
+#define RADEON_CP_VC_CNTL_TCL_DISABLE               0x00000000
+#define RADEON_CP_VC_CNTL_TCL_ENABLE                0x00000200
+#define RADEON_CP_VC_CNTL_NUM_SHIFT                 16
+
+#define RADEON_VS_MATRIX_0_ADDR                   0
+#define RADEON_VS_MATRIX_1_ADDR                   4
+#define RADEON_VS_MATRIX_2_ADDR                   8
+#define RADEON_VS_MATRIX_3_ADDR                  12
+#define RADEON_VS_MATRIX_4_ADDR                  16
+#define RADEON_VS_MATRIX_5_ADDR                  20
+#define RADEON_VS_MATRIX_6_ADDR                  24
+#define RADEON_VS_MATRIX_7_ADDR                  28
+#define RADEON_VS_MATRIX_8_ADDR                  32
+#define RADEON_VS_MATRIX_9_ADDR                  36
+#define RADEON_VS_MATRIX_10_ADDR                 40
+#define RADEON_VS_MATRIX_11_ADDR                 44
+#define RADEON_VS_MATRIX_12_ADDR                 48
+#define RADEON_VS_MATRIX_13_ADDR                 52
+#define RADEON_VS_MATRIX_14_ADDR                 56
+#define RADEON_VS_MATRIX_15_ADDR                 60
+#define RADEON_VS_LIGHT_AMBIENT_ADDR             64
+#define RADEON_VS_LIGHT_DIFFUSE_ADDR             72
+#define RADEON_VS_LIGHT_SPECULAR_ADDR            80
+#define RADEON_VS_LIGHT_DIRPOS_ADDR              88
+#define RADEON_VS_LIGHT_HWVSPOT_ADDR             96
+#define RADEON_VS_LIGHT_ATTENUATION_ADDR        104
+#define RADEON_VS_MATRIX_EYE2CLIP_ADDR          112
+#define RADEON_VS_UCP_ADDR                      116
+#define RADEON_VS_GLOBAL_AMBIENT_ADDR           122
+#define RADEON_VS_FOG_PARAM_ADDR                123
+#define RADEON_VS_EYE_VECTOR_ADDR               124
+
+#define RADEON_SS_LIGHT_DCD_ADDR                  0
+#define RADEON_SS_LIGHT_SPOT_EXPONENT_ADDR        8
+#define RADEON_SS_LIGHT_SPOT_CUTOFF_ADDR         16
+#define RADEON_SS_LIGHT_SPECULAR_THRESH_ADDR     24
+#define RADEON_SS_LIGHT_RANGE_CUTOFF_ADDR        32
+#define RADEON_SS_VERT_GUARD_CLIP_ADJ_ADDR       48
+#define RADEON_SS_VERT_GUARD_DISCARD_ADJ_ADDR    49
+#define RADEON_SS_HORZ_GUARD_CLIP_ADJ_ADDR       50
+#define RADEON_SS_HORZ_GUARD_DISCARD_ADJ_ADDR    51
+#define RADEON_SS_SHININESS                      60
+
+#define RADEON_TV_MASTER_CNTL                    0x0800
+#       define RADEON_TV_ASYNC_RST               (1 <<  0)
+#       define RADEON_CRT_ASYNC_RST              (1 <<  1)
+#       define RADEON_RESTART_PHASE_FIX          (1 <<  3)
+#	define RADEON_TV_FIFO_ASYNC_RST		 (1 <<  4)
+#	define RADEON_VIN_ASYNC_RST		 (1 <<  5)
+#	define RADEON_AUD_ASYNC_RST		 (1 <<  6)
+#	define RADEON_DVS_ASYNC_RST		 (1 <<  7)
+#       define RADEON_CRT_FIFO_CE_EN             (1 <<  9)
+#       define RADEON_TV_FIFO_CE_EN              (1 << 10)
+#       define RADEON_RE_SYNC_NOW_SEL_MASK       (3 << 14)
+#       define RADEON_TVCLK_ALWAYS_ONb           (1 << 30)
+#	define RADEON_TV_ON			 (1 << 31)
+#define RADEON_TV_PRE_DAC_MUX_CNTL               0x0888
+#       define RADEON_Y_RED_EN                   (1 << 0)
+#       define RADEON_C_GRN_EN                   (1 << 1)
+#       define RADEON_CMP_BLU_EN                 (1 << 2)
+#       define RADEON_DAC_DITHER_EN              (1 << 3)
+#       define RADEON_RED_MX_FORCE_DAC_DATA      (6 << 4)
+#       define RADEON_GRN_MX_FORCE_DAC_DATA      (6 << 8)
+#       define RADEON_BLU_MX_FORCE_DAC_DATA      (6 << 12)
+#       define RADEON_TV_FORCE_DAC_DATA_SHIFT    16
+#define RADEON_TV_RGB_CNTL                           0x0804
+#       define RADEON_SWITCH_TO_BLUE		  (1 <<  4)
+#       define RADEON_RGB_DITHER_EN		  (1 <<  5)
+#       define RADEON_RGB_SRC_SEL_MASK		  (3 <<  8)
+#       define RADEON_RGB_SRC_SEL_CRTC1		  (0 <<  8)
+#       define RADEON_RGB_SRC_SEL_RMX		  (1 <<  8)
+#       define RADEON_RGB_SRC_SEL_CRTC2		  (2 <<  8)
+#       define RADEON_RGB_CONVERT_BY_PASS	  (1 << 10)
+#       define RADEON_UVRAM_READ_MARGIN_SHIFT	  16
+#       define RADEON_FIFORAM_FFMACRO_READ_MARGIN_SHIFT	  20
+#	define RADEON_TVOUT_SCALE_EN		  (1 << 26)
+#define RADEON_TV_SYNC_CNTL                          0x0808
+#       define RADEON_SYNC_OE                     (1 <<  0)
+#       define RADEON_SYNC_OUT                    (1 <<  1)
+#       define RADEON_SYNC_IN                     (1 <<  2)
+#       define RADEON_SYNC_PUB                    (1 <<  3)
+#       define RADEON_SYNC_PD                     (1 <<  4)
+#       define RADEON_TV_SYNC_IO_DRIVE            (1 <<  5)
+#define RADEON_TV_HTOTAL                             0x080c
+#define RADEON_TV_HDISP                              0x0810
+#define RADEON_TV_HSTART                             0x0818
+#define RADEON_TV_HCOUNT                             0x081C
+#define RADEON_TV_VTOTAL                             0x0820
+#define RADEON_TV_VDISP                              0x0824
+#define RADEON_TV_VCOUNT                             0x0828
+#define RADEON_TV_FTOTAL                             0x082c
+#define RADEON_TV_FCOUNT                             0x0830
+#define RADEON_TV_FRESTART                           0x0834
+#define RADEON_TV_HRESTART                           0x0838
+#define RADEON_TV_VRESTART                           0x083c
+#define RADEON_TV_HOST_READ_DATA                     0x0840
+#define RADEON_TV_HOST_WRITE_DATA                    0x0844
+#define RADEON_TV_HOST_RD_WT_CNTL                    0x0848
+#	define RADEON_HOST_FIFO_RD		 (1 << 12)
+#	define RADEON_HOST_FIFO_RD_ACK		 (1 << 13)
+#	define RADEON_HOST_FIFO_WT		 (1 << 14)
+#	define RADEON_HOST_FIFO_WT_ACK		 (1 << 15)
+#define RADEON_TV_VSCALER_CNTL1                      0x084c
+#       define RADEON_UV_INC_MASK                0xffff
+#       define RADEON_UV_INC_SHIFT               0
+#       define RADEON_Y_W_EN			 (1 << 24)
+#       define RADEON_RESTART_FIELD              (1 << 29) /* restart on field 0 */
+#       define RADEON_Y_DEL_W_SIG_SHIFT          26
+#define RADEON_TV_TIMING_CNTL                        0x0850
+#       define RADEON_H_INC_MASK                 0xfff
+#       define RADEON_H_INC_SHIFT                0
+#       define RADEON_REQ_Y_FIRST                (1 << 19)
+#       define RADEON_FORCE_BURST_ALWAYS         (1 << 21)
+#       define RADEON_UV_POST_SCALE_BYPASS       (1 << 23)
+#       define RADEON_UV_OUTPUT_POST_SCALE_SHIFT 24
+#define RADEON_TV_VSCALER_CNTL2                      0x0854
+#       define RADEON_DITHER_MODE                (1 <<  0)
+#       define RADEON_Y_OUTPUT_DITHER_EN         (1 <<  1)
+#       define RADEON_UV_OUTPUT_DITHER_EN        (1 <<  2)
+#       define RADEON_UV_TO_BUF_DITHER_EN        (1 <<  3)
+#define RADEON_TV_Y_FALL_CNTL                        0x0858
+#       define RADEON_Y_FALL_PING_PONG           (1 << 16)
+#       define RADEON_Y_COEF_EN                  (1 << 17)
+#define RADEON_TV_Y_RISE_CNTL                        0x085c
+#       define RADEON_Y_RISE_PING_PONG           (1 << 16)
+#define RADEON_TV_Y_SAW_TOOTH_CNTL                   0x0860
+#define RADEON_TV_UPSAMP_AND_GAIN_CNTL               0x0864
+#	define RADEON_YUPSAMP_EN		 (1 <<  0)
+#	define RADEON_UVUPSAMP_EN		 (1 <<  2)
+#define RADEON_TV_GAIN_LIMIT_SETTINGS                0x0868
+#       define RADEON_Y_GAIN_LIMIT_SHIFT         0
+#       define RADEON_UV_GAIN_LIMIT_SHIFT        16
+#define RADEON_TV_LINEAR_GAIN_SETTINGS               0x086c
+#       define RADEON_Y_GAIN_SHIFT               0
+#       define RADEON_UV_GAIN_SHIFT              16
+#define RADEON_TV_MODULATOR_CNTL1                    0x0870
+#	define RADEON_YFLT_EN			 (1 <<  2)
+#	define RADEON_UVFLT_EN			 (1 <<  3)
+#       define RADEON_ALT_PHASE_EN               (1 <<  6)
+#       define RADEON_SYNC_TIP_LEVEL             (1 <<  7)
+#       define RADEON_BLANK_LEVEL_SHIFT          8
+#       define RADEON_SET_UP_LEVEL_SHIFT         16
+#	define RADEON_SLEW_RATE_LIMIT		 (1 << 23)
+#       define RADEON_CY_FILT_BLEND_SHIFT        28
+#define RADEON_TV_MODULATOR_CNTL2                    0x0874
+#       define RADEON_TV_U_BURST_LEVEL_MASK     0x1ff
+#       define RADEON_TV_V_BURST_LEVEL_MASK     0x1ff
+#       define RADEON_TV_V_BURST_LEVEL_SHIFT    16
+#define RADEON_TV_CRC_CNTL                           0x0890
+#define RADEON_TV_UV_ADR                             0x08ac
+#	define RADEON_MAX_UV_ADR_MASK		 0x000000ff
+#	define RADEON_MAX_UV_ADR_SHIFT		 0
+#	define RADEON_TABLE1_BOT_ADR_MASK	 0x0000ff00
+#	define RADEON_TABLE1_BOT_ADR_SHIFT	 8
+#	define RADEON_TABLE3_TOP_ADR_MASK	 0x00ff0000
+#	define RADEON_TABLE3_TOP_ADR_SHIFT	 16
+#	define RADEON_HCODE_TABLE_SEL_MASK	 0x06000000
+#	define RADEON_HCODE_TABLE_SEL_SHIFT	 25
+#	define RADEON_VCODE_TABLE_SEL_MASK	 0x18000000
+#	define RADEON_VCODE_TABLE_SEL_SHIFT	 27
+#	define RADEON_TV_MAX_FIFO_ADDR		 0x1a7
+#	define RADEON_TV_MAX_FIFO_ADDR_INTERNAL	 0x1ff
+#define RADEON_TV_PLL_FINE_CNTL			     0x0020	/* PLL */
+#define RADEON_TV_PLL_CNTL                           0x0021	/* PLL */
+#       define RADEON_TV_M0LO_MASK               0xff
+#       define RADEON_TV_M0HI_MASK               0x7
+#       define RADEON_TV_M0HI_SHIFT              18
+#       define RADEON_TV_N0LO_MASK               0x1ff
+#       define RADEON_TV_N0LO_SHIFT              8
+#       define RADEON_TV_N0HI_MASK               0x3
+#       define RADEON_TV_N0HI_SHIFT              21
+#       define RADEON_TV_P_MASK                  0xf
+#       define RADEON_TV_P_SHIFT                 24
+#       define RADEON_TV_SLIP_EN                 (1 << 23)
+#       define RADEON_TV_DTO_EN                  (1 << 28)
+#define RADEON_TV_PLL_CNTL1                          0x0022	/* PLL */
+#       define RADEON_TVPLL_RESET                (1 <<  1)
+#       define RADEON_TVPLL_SLEEP                (1 <<  3)
+#       define RADEON_TVPLL_REFCLK_SEL           (1 <<  4)
+#       define RADEON_TVPCP_SHIFT                8
+#       define RADEON_TVPCP_MASK                 (7 << 8)
+#       define RADEON_TVPVG_SHIFT                11
+#       define RADEON_TVPVG_MASK                 (7 << 11)
+#       define RADEON_TVPDC_SHIFT                14
+#       define RADEON_TVPDC_MASK                 (3 << 14)
+#       define RADEON_TVPLL_TEST_DIS             (1 << 31)
+#       define RADEON_TVCLK_SRC_SEL_TVPLL        (1 << 30)
+
+#define RS400_DISP2_REQ_CNTL1			0xe30
+#       define RS400_DISP2_START_REQ_LEVEL_SHIFT   0
+#       define RS400_DISP2_START_REQ_LEVEL_MASK    0x3ff
+#       define RS400_DISP2_STOP_REQ_LEVEL_SHIFT    12
+#       define RS400_DISP2_STOP_REQ_LEVEL_MASK     0x3ff
+#       define RS400_DISP2_ALLOW_FID_LEVEL_SHIFT   22
+#       define RS400_DISP2_ALLOW_FID_LEVEL_MASK    0x3ff
+#define RS400_DISP2_REQ_CNTL2			0xe34
+#       define RS400_DISP2_CRITICAL_POINT_START_SHIFT    12
+#       define RS400_DISP2_CRITICAL_POINT_START_MASK     0x3ff
+#       define RS400_DISP2_CRITICAL_POINT_STOP_SHIFT     22
+#       define RS400_DISP2_CRITICAL_POINT_STOP_MASK      0x3ff
+#define RS400_DMIF_MEM_CNTL1			0xe38
+#       define RS400_DISP2_START_ADR_SHIFT      0
+#       define RS400_DISP2_START_ADR_MASK       0x3ff
+#       define RS400_DISP1_CRITICAL_POINT_START_SHIFT    12
+#       define RS400_DISP1_CRITICAL_POINT_START_MASK     0x3ff
+#       define RS400_DISP1_CRITICAL_POINT_STOP_SHIFT     22
+#       define RS400_DISP1_CRITICAL_POINT_STOP_MASK      0x3ff
+#define RS400_DISP1_REQ_CNTL1			0xe3c
+#       define RS400_DISP1_START_REQ_LEVEL_SHIFT   0
+#       define RS400_DISP1_START_REQ_LEVEL_MASK    0x3ff
+#       define RS400_DISP1_STOP_REQ_LEVEL_SHIFT    12
+#       define RS400_DISP1_STOP_REQ_LEVEL_MASK     0x3ff
+#       define RS400_DISP1_ALLOW_FID_LEVEL_SHIFT   22
+#       define RS400_DISP1_ALLOW_FID_LEVEL_MASK    0x3ff
+
+#define RADEON_PCIE_INDEX               0x0030
+#define RADEON_PCIE_DATA                0x0034
+#define RADEON_PCIE_TX_GART_CNTL	0x10
+#	define RADEON_PCIE_TX_GART_EN		(1 << 0)
+#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0 << 1)
+#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO  (1 << 1)
+#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD   (3 << 1)
+#	define RADEON_PCIE_TX_GART_MODE_32_128_CACHE	(0 << 3)
+#	define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE	(1 << 3)
+#	define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN      (1 << 5)
+#	define RADEON_PCIE_TX_GART_INVALIDATE_TLB	(1 << 8)
+#define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11
+#define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12
+#define RADEON_PCIE_TX_GART_BASE	0x13
+#define RADEON_PCIE_TX_GART_START_LO	0x14
+#define RADEON_PCIE_TX_GART_START_HI	0x15
+#define RADEON_PCIE_TX_GART_END_LO	0x16
+#define RADEON_PCIE_TX_GART_END_HI	0x17
+#define RADEON_PCIE_TX_GART_ERROR	0x18
+
+#define RADEON_SCRATCH_REG0		0x15e0
+#define RADEON_SCRATCH_REG1		0x15e4
+#define RADEON_SCRATCH_REG2		0x15e8
+#define RADEON_SCRATCH_REG3		0x15ec
+#define RADEON_SCRATCH_REG4		0x15f0
+#define RADEON_SCRATCH_REG5		0x15f4
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
new file mode 100644
index 00000000000..a853261d188
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -0,0 +1,485 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include <linux/seq_file.h>
+#include "drmP.h"
+#include "radeon_drm.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+#include "atom.h"
+
+int radeon_debugfs_ib_init(struct radeon_device *rdev);
+
+/*
+ * IB.
+ */
+int radeon_ib_get(struct radeon_device *rdev, struct radeon_ib **ib)
+{
+	struct radeon_fence *fence;
+	struct radeon_ib *nib;
+	unsigned long i;
+	int r = 0;
+
+	*ib = NULL;
+	r = radeon_fence_create(rdev, &fence);
+	if (r) {
+		DRM_ERROR("failed to create fence for new IB\n");
+		return r;
+	}
+	mutex_lock(&rdev->ib_pool.mutex);
+	i = find_first_zero_bit(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
+	if (i < RADEON_IB_POOL_SIZE) {
+		set_bit(i, rdev->ib_pool.alloc_bm);
+		rdev->ib_pool.ibs[i].length_dw = 0;
+		*ib = &rdev->ib_pool.ibs[i];
+		goto out;
+	}
+	if (list_empty(&rdev->ib_pool.scheduled_ibs)) {
+		/* we go do nothings here */
+		DRM_ERROR("all IB allocated none scheduled.\n");
+		r = -EINVAL;
+		goto out;
+	}
+	/* get the first ib on the scheduled list */
+	nib = list_entry(rdev->ib_pool.scheduled_ibs.next,
+			 struct radeon_ib, list);
+	if (nib->fence == NULL) {
+		/* we go do nothings here */
+		DRM_ERROR("IB %lu scheduled without a fence.\n", nib->idx);
+		r = -EINVAL;
+		goto out;
+	}
+	r = radeon_fence_wait(nib->fence, false);
+	if (r) {
+		DRM_ERROR("radeon: IB(%lu:0x%016lX:%u)\n", nib->idx,
+			  (unsigned long)nib->gpu_addr, nib->length_dw);
+		DRM_ERROR("radeon: GPU lockup detected, fail to get a IB\n");
+		goto out;
+	}
+	radeon_fence_unref(&nib->fence);
+	nib->length_dw = 0;
+	list_del(&nib->list);
+	INIT_LIST_HEAD(&nib->list);
+	*ib = nib;
+out:
+	mutex_unlock(&rdev->ib_pool.mutex);
+	if (r) {
+		radeon_fence_unref(&fence);
+	} else {
+		(*ib)->fence = fence;
+	}
+	return r;
+}
+
+void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib)
+{
+	struct radeon_ib *tmp = *ib;
+
+	*ib = NULL;
+	if (tmp == NULL) {
+		return;
+	}
+	mutex_lock(&rdev->ib_pool.mutex);
+	if (!list_empty(&tmp->list) && !radeon_fence_signaled(tmp->fence)) {
+		/* IB is scheduled & not signaled don't do anythings */
+		mutex_unlock(&rdev->ib_pool.mutex);
+		return;
+	}
+	list_del(&tmp->list);
+	INIT_LIST_HEAD(&tmp->list);
+	if (tmp->fence) {
+		radeon_fence_unref(&tmp->fence);
+	}
+	tmp->length_dw = 0;
+	clear_bit(tmp->idx, rdev->ib_pool.alloc_bm);
+	mutex_unlock(&rdev->ib_pool.mutex);
+}
+
+static void radeon_ib_align(struct radeon_device *rdev, struct radeon_ib *ib)
+{
+	while ((ib->length_dw & rdev->cp.align_mask)) {
+		ib->ptr[ib->length_dw++] = PACKET2(0);
+	}
+}
+
+static void radeon_ib_cpu_flush(struct radeon_device *rdev,
+				struct radeon_ib *ib)
+{
+	unsigned long tmp;
+	unsigned i;
+
+	/* To force CPU cache flush ugly but seems reliable */
+	for (i = 0; i < ib->length_dw; i += (rdev->cp.align_mask + 1)) {
+		tmp = readl(&ib->ptr[i]);
+	}
+}
+
+int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib)
+{
+	int r = 0;
+
+	mutex_lock(&rdev->ib_pool.mutex);
+	radeon_ib_align(rdev, ib);
+	radeon_ib_cpu_flush(rdev, ib);
+	if (!ib->length_dw || !rdev->cp.ready) {
+		/* TODO: Nothings in the ib we should report. */
+		mutex_unlock(&rdev->ib_pool.mutex);
+		DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
+		return -EINVAL;
+	}
+	/* 64 dwords should be enought for fence too */
+	r = radeon_ring_lock(rdev, 64);
+	if (r) {
+		DRM_ERROR("radeon: scheduling IB failled (%d).\n", r);
+		mutex_unlock(&rdev->ib_pool.mutex);
+		return r;
+	}
+	radeon_ring_write(rdev, PACKET0(RADEON_CP_IB_BASE, 1));
+	radeon_ring_write(rdev, ib->gpu_addr);
+	radeon_ring_write(rdev, ib->length_dw);
+	radeon_fence_emit(rdev, ib->fence);
+	radeon_ring_unlock_commit(rdev);
+	list_add_tail(&ib->list, &rdev->ib_pool.scheduled_ibs);
+	mutex_unlock(&rdev->ib_pool.mutex);
+	return 0;
+}
+
+int radeon_ib_pool_init(struct radeon_device *rdev)
+{
+	void *ptr;
+	uint64_t gpu_addr;
+	int i;
+	int r = 0;
+
+	/* Allocate 1M object buffer */
+	INIT_LIST_HEAD(&rdev->ib_pool.scheduled_ibs);
+	r = radeon_object_create(rdev, NULL,  RADEON_IB_POOL_SIZE*64*1024,
+				 true, RADEON_GEM_DOMAIN_GTT,
+				 false, &rdev->ib_pool.robj);
+	if (r) {
+		DRM_ERROR("radeon: failed to ib pool (%d).\n", r);
+		return r;
+	}
+	r = radeon_object_pin(rdev->ib_pool.robj, RADEON_GEM_DOMAIN_GTT, &gpu_addr);
+	if (r) {
+		DRM_ERROR("radeon: failed to pin ib pool (%d).\n", r);
+		return r;
+	}
+	r = radeon_object_kmap(rdev->ib_pool.robj, &ptr);
+	if (r) {
+		DRM_ERROR("radeon: failed to map ib poll (%d).\n", r);
+		return r;
+	}
+	for (i = 0; i < RADEON_IB_POOL_SIZE; i++) {
+		unsigned offset;
+
+		offset = i * 64 * 1024;
+		rdev->ib_pool.ibs[i].gpu_addr = gpu_addr + offset;
+		rdev->ib_pool.ibs[i].ptr = ptr + offset;
+		rdev->ib_pool.ibs[i].idx = i;
+		rdev->ib_pool.ibs[i].length_dw = 0;
+		INIT_LIST_HEAD(&rdev->ib_pool.ibs[i].list);
+	}
+	bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
+	rdev->ib_pool.ready = true;
+	DRM_INFO("radeon: ib pool ready.\n");
+	if (radeon_debugfs_ib_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for IB !\n");
+	}
+	return r;
+}
+
+void radeon_ib_pool_fini(struct radeon_device *rdev)
+{
+	if (!rdev->ib_pool.ready) {
+		return;
+	}
+	mutex_lock(&rdev->ib_pool.mutex);
+	bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
+	if (rdev->ib_pool.robj) {
+		radeon_object_kunmap(rdev->ib_pool.robj);
+		radeon_object_unref(&rdev->ib_pool.robj);
+		rdev->ib_pool.robj = NULL;
+	}
+	mutex_unlock(&rdev->ib_pool.mutex);
+}
+
+int radeon_ib_test(struct radeon_device *rdev)
+{
+	struct radeon_ib *ib;
+	uint32_t scratch;
+	uint32_t tmp = 0;
+	unsigned i;
+	int r;
+
+	r = radeon_scratch_get(rdev, &scratch);
+	if (r) {
+		DRM_ERROR("radeon: failed to get scratch reg (%d).\n", r);
+		return r;
+	}
+	WREG32(scratch, 0xCAFEDEAD);
+	r = radeon_ib_get(rdev, &ib);
+	if (r) {
+		return r;
+	}
+	ib->ptr[0] = PACKET0(scratch, 0);
+	ib->ptr[1] = 0xDEADBEEF;
+	ib->ptr[2] = PACKET2(0);
+	ib->ptr[3] = PACKET2(0);
+	ib->ptr[4] = PACKET2(0);
+	ib->ptr[5] = PACKET2(0);
+	ib->ptr[6] = PACKET2(0);
+	ib->ptr[7] = PACKET2(0);
+	ib->length_dw = 8;
+	r = radeon_ib_schedule(rdev, ib);
+	if (r) {
+		radeon_scratch_free(rdev, scratch);
+		radeon_ib_free(rdev, &ib);
+		return r;
+	}
+	r = radeon_fence_wait(ib->fence, false);
+	if (r) {
+		return r;
+	}
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(scratch);
+		if (tmp == 0xDEADBEEF) {
+			break;
+		}
+		DRM_UDELAY(1);
+	}
+	if (i < rdev->usec_timeout) {
+		DRM_INFO("ib test succeeded in %u usecs\n", i);
+	} else {
+		DRM_ERROR("radeon: ib test failed (sracth(0x%04X)=0x%08X)\n",
+			  scratch, tmp);
+		r = -EINVAL;
+	}
+	radeon_scratch_free(rdev, scratch);
+	radeon_ib_free(rdev, &ib);
+	return r;
+}
+
+
+/*
+ * Ring.
+ */
+void radeon_ring_free_size(struct radeon_device *rdev)
+{
+	rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR);
+	/* This works because ring_size is a power of 2 */
+	rdev->cp.ring_free_dw = (rdev->cp.rptr + (rdev->cp.ring_size / 4));
+	rdev->cp.ring_free_dw -= rdev->cp.wptr;
+	rdev->cp.ring_free_dw &= rdev->cp.ptr_mask;
+	if (!rdev->cp.ring_free_dw) {
+		rdev->cp.ring_free_dw = rdev->cp.ring_size / 4;
+	}
+}
+
+int radeon_ring_lock(struct radeon_device *rdev, unsigned ndw)
+{
+	int r;
+
+	/* Align requested size with padding so unlock_commit can
+	 * pad safely */
+	ndw = (ndw + rdev->cp.align_mask) & ~rdev->cp.align_mask;
+	mutex_lock(&rdev->cp.mutex);
+	while (ndw > (rdev->cp.ring_free_dw - 1)) {
+		radeon_ring_free_size(rdev);
+		if (ndw < rdev->cp.ring_free_dw) {
+			break;
+		}
+		r = radeon_fence_wait_next(rdev);
+		if (r) {
+			mutex_unlock(&rdev->cp.mutex);
+			return r;
+		}
+	}
+	rdev->cp.count_dw = ndw;
+	rdev->cp.wptr_old = rdev->cp.wptr;
+	return 0;
+}
+
+void radeon_ring_unlock_commit(struct radeon_device *rdev)
+{
+	unsigned count_dw_pad;
+	unsigned i;
+
+	/* We pad to match fetch size */
+	count_dw_pad = (rdev->cp.align_mask + 1) -
+		       (rdev->cp.wptr & rdev->cp.align_mask);
+	for (i = 0; i < count_dw_pad; i++) {
+		radeon_ring_write(rdev, PACKET2(0));
+	}
+	DRM_MEMORYBARRIER();
+	WREG32(RADEON_CP_RB_WPTR, rdev->cp.wptr);
+	(void)RREG32(RADEON_CP_RB_WPTR);
+	mutex_unlock(&rdev->cp.mutex);
+}
+
+void radeon_ring_unlock_undo(struct radeon_device *rdev)
+{
+	rdev->cp.wptr = rdev->cp.wptr_old;
+	mutex_unlock(&rdev->cp.mutex);
+}
+
+int radeon_ring_test(struct radeon_device *rdev)
+{
+	uint32_t scratch;
+	uint32_t tmp = 0;
+	unsigned i;
+	int r;
+
+	r = radeon_scratch_get(rdev, &scratch);
+	if (r) {
+		DRM_ERROR("radeon: cp failed to get scratch reg (%d).\n", r);
+		return r;
+	}
+	WREG32(scratch, 0xCAFEDEAD);
+	r = radeon_ring_lock(rdev, 2);
+	if (r) {
+		DRM_ERROR("radeon: cp failed to lock ring (%d).\n", r);
+		radeon_scratch_free(rdev, scratch);
+		return r;
+	}
+	radeon_ring_write(rdev, PACKET0(scratch, 0));
+	radeon_ring_write(rdev, 0xDEADBEEF);
+	radeon_ring_unlock_commit(rdev);
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(scratch);
+		if (tmp == 0xDEADBEEF) {
+			break;
+		}
+		DRM_UDELAY(1);
+	}
+	if (i < rdev->usec_timeout) {
+		DRM_INFO("ring test succeeded in %d usecs\n", i);
+	} else {
+		DRM_ERROR("radeon: ring test failed (sracth(0x%04X)=0x%08X)\n",
+			  scratch, tmp);
+		r = -EINVAL;
+	}
+	radeon_scratch_free(rdev, scratch);
+	return r;
+}
+
+int radeon_ring_init(struct radeon_device *rdev, unsigned ring_size)
+{
+	int r;
+
+	rdev->cp.ring_size = ring_size;
+	/* Allocate ring buffer */
+	if (rdev->cp.ring_obj == NULL) {
+		r = radeon_object_create(rdev, NULL, rdev->cp.ring_size,
+					 true,
+					 RADEON_GEM_DOMAIN_GTT,
+					 false,
+					 &rdev->cp.ring_obj);
+		if (r) {
+			DRM_ERROR("radeon: failed to create ring buffer (%d).\n", r);
+			mutex_unlock(&rdev->cp.mutex);
+			return r;
+		}
+		r = radeon_object_pin(rdev->cp.ring_obj,
+				      RADEON_GEM_DOMAIN_GTT,
+				      &rdev->cp.gpu_addr);
+		if (r) {
+			DRM_ERROR("radeon: failed to pin ring buffer (%d).\n", r);
+			mutex_unlock(&rdev->cp.mutex);
+			return r;
+		}
+		r = radeon_object_kmap(rdev->cp.ring_obj,
+				       (void **)&rdev->cp.ring);
+		if (r) {
+			DRM_ERROR("radeon: failed to map ring buffer (%d).\n", r);
+			mutex_unlock(&rdev->cp.mutex);
+			return r;
+		}
+	}
+	rdev->cp.ptr_mask = (rdev->cp.ring_size / 4) - 1;
+	rdev->cp.ring_free_dw = rdev->cp.ring_size / 4;
+	return 0;
+}
+
+void radeon_ring_fini(struct radeon_device *rdev)
+{
+	mutex_lock(&rdev->cp.mutex);
+	if (rdev->cp.ring_obj) {
+		radeon_object_kunmap(rdev->cp.ring_obj);
+		radeon_object_unpin(rdev->cp.ring_obj);
+		radeon_object_unref(&rdev->cp.ring_obj);
+		rdev->cp.ring = NULL;
+		rdev->cp.ring_obj = NULL;
+	}
+	mutex_unlock(&rdev->cp.mutex);
+}
+
+
+/*
+ * Debugfs info
+ */
+#if defined(CONFIG_DEBUG_FS)
+static int radeon_debugfs_ib_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct radeon_ib *ib = node->info_ent->data;
+	unsigned i;
+
+	if (ib == NULL) {
+		return 0;
+	}
+	seq_printf(m, "IB %04lu\n", ib->idx);
+	seq_printf(m, "IB fence %p\n", ib->fence);
+	seq_printf(m, "IB size %05u dwords\n", ib->length_dw);
+	for (i = 0; i < ib->length_dw; i++) {
+		seq_printf(m, "[%05u]=0x%08X\n", i, ib->ptr[i]);
+	}
+	return 0;
+}
+
+static struct drm_info_list radeon_debugfs_ib_list[RADEON_IB_POOL_SIZE];
+static char radeon_debugfs_ib_names[RADEON_IB_POOL_SIZE][32];
+#endif
+
+int radeon_debugfs_ib_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	unsigned i;
+
+	for (i = 0; i < RADEON_IB_POOL_SIZE; i++) {
+		sprintf(radeon_debugfs_ib_names[i], "radeon_ib_%04u", i);
+		radeon_debugfs_ib_list[i].name = radeon_debugfs_ib_names[i];
+		radeon_debugfs_ib_list[i].show = &radeon_debugfs_ib_info;
+		radeon_debugfs_ib_list[i].driver_features = 0;
+		radeon_debugfs_ib_list[i].data = &rdev->ib_pool.ibs[i];
+	}
+	return radeon_debugfs_add_files(rdev, radeon_debugfs_ib_list,
+					RADEON_IB_POOL_SIZE);
+#else
+	return 0;
+#endif
+}
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
new file mode 100644
index 00000000000..4c087c1510d
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -0,0 +1,653 @@
+/*
+ * Copyright 2009 Jerome Glisse.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ */
+/*
+ * Authors:
+ *    Jerome Glisse <glisse@freedesktop.org>
+ *    Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ *    Dave Airlie
+ */
+#include <ttm/ttm_bo_api.h>
+#include <ttm/ttm_bo_driver.h>
+#include <ttm/ttm_placement.h>
+#include <ttm/ttm_module.h>
+#include <drm/drmP.h>
+#include <drm/radeon_drm.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+
+#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
+
+static struct radeon_device *radeon_get_rdev(struct ttm_bo_device *bdev)
+{
+	struct radeon_mman *mman;
+	struct radeon_device *rdev;
+
+	mman = container_of(bdev, struct radeon_mman, bdev);
+	rdev = container_of(mman, struct radeon_device, mman);
+	return rdev;
+}
+
+
+/*
+ * Global memory.
+ */
+static int radeon_ttm_mem_global_init(struct ttm_global_reference *ref)
+{
+	return ttm_mem_global_init(ref->object);
+}
+
+static void radeon_ttm_mem_global_release(struct ttm_global_reference *ref)
+{
+	ttm_mem_global_release(ref->object);
+}
+
+static int radeon_ttm_global_init(struct radeon_device *rdev)
+{
+	struct ttm_global_reference *global_ref;
+	int r;
+
+	rdev->mman.mem_global_referenced = false;
+	global_ref = &rdev->mman.mem_global_ref;
+	global_ref->global_type = TTM_GLOBAL_TTM_MEM;
+	global_ref->size = sizeof(struct ttm_mem_global);
+	global_ref->init = &radeon_ttm_mem_global_init;
+	global_ref->release = &radeon_ttm_mem_global_release;
+	r = ttm_global_item_ref(global_ref);
+	if (r != 0) {
+		DRM_ERROR("Failed referencing a global TTM memory object.\n");
+		return r;
+	}
+	rdev->mman.mem_global_referenced = true;
+	return 0;
+}
+
+static void radeon_ttm_global_fini(struct radeon_device *rdev)
+{
+	if (rdev->mman.mem_global_referenced) {
+		ttm_global_item_unref(&rdev->mman.mem_global_ref);
+		rdev->mman.mem_global_referenced = false;
+	}
+}
+
+struct ttm_backend *radeon_ttm_backend_create(struct radeon_device *rdev);
+
+static struct ttm_backend*
+radeon_create_ttm_backend_entry(struct ttm_bo_device *bdev)
+{
+	struct radeon_device *rdev;
+
+	rdev = radeon_get_rdev(bdev);
+#if __OS_HAS_AGP
+	if (rdev->flags & RADEON_IS_AGP) {
+		return ttm_agp_backend_init(bdev, rdev->ddev->agp->bridge);
+	} else
+#endif
+	{
+		return radeon_ttm_backend_create(rdev);
+	}
+}
+
+static int radeon_invalidate_caches(struct ttm_bo_device *bdev, uint32_t flags)
+{
+	return 0;
+}
+
+static int radeon_init_mem_type(struct ttm_bo_device *bdev, uint32_t type,
+				struct ttm_mem_type_manager *man)
+{
+	struct radeon_device *rdev;
+
+	rdev = radeon_get_rdev(bdev);
+
+	switch (type) {
+	case TTM_PL_SYSTEM:
+		/* System memory */
+		man->flags = TTM_MEMTYPE_FLAG_MAPPABLE;
+		man->available_caching = TTM_PL_MASK_CACHING;
+		man->default_caching = TTM_PL_FLAG_CACHED;
+		break;
+	case TTM_PL_TT:
+		man->gpu_offset = 0;
+		man->available_caching = TTM_PL_MASK_CACHING;
+		man->default_caching = TTM_PL_FLAG_CACHED;
+#if __OS_HAS_AGP
+		if (rdev->flags & RADEON_IS_AGP) {
+			if (!(drm_core_has_AGP(rdev->ddev) && rdev->ddev->agp)) {
+				DRM_ERROR("AGP is not enabled for memory type %u\n",
+					  (unsigned)type);
+				return -EINVAL;
+			}
+			man->io_offset = rdev->mc.agp_base;
+			man->io_size = rdev->mc.gtt_size;
+			man->io_addr = NULL;
+			man->flags = TTM_MEMTYPE_FLAG_NEEDS_IOREMAP |
+				     TTM_MEMTYPE_FLAG_MAPPABLE;
+			man->available_caching = TTM_PL_FLAG_UNCACHED |
+						 TTM_PL_FLAG_WC;
+			man->default_caching = TTM_PL_FLAG_WC;
+		} else
+#endif
+		{
+			man->io_offset = 0;
+			man->io_size = 0;
+			man->io_addr = NULL;
+			man->flags = TTM_MEMTYPE_FLAG_MAPPABLE |
+				     TTM_MEMTYPE_FLAG_CMA;
+		}
+		break;
+	case TTM_PL_VRAM:
+		/* "On-card" video ram */
+		man->gpu_offset = 0;
+		man->flags = TTM_MEMTYPE_FLAG_FIXED |
+			     TTM_MEMTYPE_FLAG_NEEDS_IOREMAP |
+			     TTM_MEMTYPE_FLAG_MAPPABLE;
+		man->available_caching = TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_WC;
+		man->default_caching = TTM_PL_FLAG_WC;
+		man->io_addr = NULL;
+		man->io_offset = rdev->mc.aper_base;
+		man->io_size = rdev->mc.aper_size;
+		break;
+	default:
+		DRM_ERROR("Unsupported memory type %u\n", (unsigned)type);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static uint32_t radeon_evict_flags(struct ttm_buffer_object *bo)
+{
+	uint32_t cur_placement = bo->mem.placement & ~TTM_PL_MASK_MEMTYPE;
+
+	switch (bo->mem.mem_type) {
+	default:
+		return (cur_placement & ~TTM_PL_MASK_CACHING) |
+			TTM_PL_FLAG_SYSTEM |
+			TTM_PL_FLAG_CACHED;
+	}
+}
+
+static int radeon_verify_access(struct ttm_buffer_object *bo, struct file *filp)
+{
+	return 0;
+}
+
+static void radeon_move_null(struct ttm_buffer_object *bo,
+			     struct ttm_mem_reg *new_mem)
+{
+	struct ttm_mem_reg *old_mem = &bo->mem;
+
+	BUG_ON(old_mem->mm_node != NULL);
+	*old_mem = *new_mem;
+	new_mem->mm_node = NULL;
+}
+
+static int radeon_move_blit(struct ttm_buffer_object *bo,
+			    bool evict, int no_wait,
+			    struct ttm_mem_reg *new_mem,
+			    struct ttm_mem_reg *old_mem)
+{
+	struct radeon_device *rdev;
+	uint64_t old_start, new_start;
+	struct radeon_fence *fence;
+	int r;
+
+	rdev = radeon_get_rdev(bo->bdev);
+	r = radeon_fence_create(rdev, &fence);
+	if (unlikely(r)) {
+		return r;
+	}
+	old_start = old_mem->mm_node->start << PAGE_SHIFT;
+	new_start = new_mem->mm_node->start << PAGE_SHIFT;
+
+	switch (old_mem->mem_type) {
+	case TTM_PL_VRAM:
+		old_start += rdev->mc.vram_location;
+		break;
+	case TTM_PL_TT:
+		old_start += rdev->mc.gtt_location;
+		break;
+	default:
+		DRM_ERROR("Unknown placement %d\n", old_mem->mem_type);
+		return -EINVAL;
+	}
+	switch (new_mem->mem_type) {
+	case TTM_PL_VRAM:
+		new_start += rdev->mc.vram_location;
+		break;
+	case TTM_PL_TT:
+		new_start += rdev->mc.gtt_location;
+		break;
+	default:
+		DRM_ERROR("Unknown placement %d\n", old_mem->mem_type);
+		return -EINVAL;
+	}
+	if (!rdev->cp.ready) {
+		DRM_ERROR("Trying to move memory with CP turned off.\n");
+		return -EINVAL;
+	}
+	r = radeon_copy(rdev, old_start, new_start, new_mem->num_pages, fence);
+	/* FIXME: handle copy error */
+	r = ttm_bo_move_accel_cleanup(bo, (void *)fence, NULL,
+				      evict, no_wait, new_mem);
+	radeon_fence_unref(&fence);
+	return r;
+}
+
+static int radeon_move_vram_ram(struct ttm_buffer_object *bo,
+				bool evict, bool interruptible, bool no_wait,
+				struct ttm_mem_reg *new_mem)
+{
+	struct radeon_device *rdev;
+	struct ttm_mem_reg *old_mem = &bo->mem;
+	struct ttm_mem_reg tmp_mem;
+	uint32_t proposed_placement;
+	int r;
+
+	rdev = radeon_get_rdev(bo->bdev);
+	tmp_mem = *new_mem;
+	tmp_mem.mm_node = NULL;
+	proposed_placement = TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
+	r = ttm_bo_mem_space(bo, proposed_placement, &tmp_mem,
+			     interruptible, no_wait);
+	if (unlikely(r)) {
+		return r;
+	}
+	r = ttm_tt_bind(bo->ttm, &tmp_mem);
+	if (unlikely(r)) {
+		goto out_cleanup;
+	}
+	r = radeon_move_blit(bo, true, no_wait, &tmp_mem, old_mem);
+	if (unlikely(r)) {
+		goto out_cleanup;
+	}
+	r = ttm_bo_move_ttm(bo, true, no_wait, new_mem);
+out_cleanup:
+	if (tmp_mem.mm_node) {
+		spin_lock(&rdev->mman.bdev.lru_lock);
+		drm_mm_put_block(tmp_mem.mm_node);
+		spin_unlock(&rdev->mman.bdev.lru_lock);
+		return r;
+	}
+	return r;
+}
+
+static int radeon_move_ram_vram(struct ttm_buffer_object *bo,
+				bool evict, bool interruptible, bool no_wait,
+				struct ttm_mem_reg *new_mem)
+{
+	struct radeon_device *rdev;
+	struct ttm_mem_reg *old_mem = &bo->mem;
+	struct ttm_mem_reg tmp_mem;
+	uint32_t proposed_flags;
+	int r;
+
+	rdev = radeon_get_rdev(bo->bdev);
+	tmp_mem = *new_mem;
+	tmp_mem.mm_node = NULL;
+	proposed_flags = TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
+	r = ttm_bo_mem_space(bo, proposed_flags, &tmp_mem,
+			     interruptible, no_wait);
+	if (unlikely(r)) {
+		return r;
+	}
+	r = ttm_bo_move_ttm(bo, true, no_wait, &tmp_mem);
+	if (unlikely(r)) {
+		goto out_cleanup;
+	}
+	r = radeon_move_blit(bo, true, no_wait, new_mem, old_mem);
+	if (unlikely(r)) {
+		goto out_cleanup;
+	}
+out_cleanup:
+	if (tmp_mem.mm_node) {
+		spin_lock(&rdev->mman.bdev.lru_lock);
+		drm_mm_put_block(tmp_mem.mm_node);
+		spin_unlock(&rdev->mman.bdev.lru_lock);
+		return r;
+	}
+	return r;
+}
+
+static int radeon_bo_move(struct ttm_buffer_object *bo,
+			  bool evict, bool interruptible, bool no_wait,
+			  struct ttm_mem_reg *new_mem)
+{
+	struct radeon_device *rdev;
+	struct ttm_mem_reg *old_mem = &bo->mem;
+	int r;
+
+	rdev = radeon_get_rdev(bo->bdev);
+	if (old_mem->mem_type == TTM_PL_SYSTEM && bo->ttm == NULL) {
+		radeon_move_null(bo, new_mem);
+		return 0;
+	}
+	if ((old_mem->mem_type == TTM_PL_TT &&
+	     new_mem->mem_type == TTM_PL_SYSTEM) ||
+	    (old_mem->mem_type == TTM_PL_SYSTEM &&
+	     new_mem->mem_type == TTM_PL_TT)) {
+		/* bind is enought */
+		radeon_move_null(bo, new_mem);
+		return 0;
+	}
+	if (!rdev->cp.ready) {
+		/* use memcpy */
+		DRM_ERROR("CP is not ready use memcpy.\n");
+		return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+	}
+
+	if (old_mem->mem_type == TTM_PL_VRAM &&
+	    new_mem->mem_type == TTM_PL_SYSTEM) {
+		return radeon_move_vram_ram(bo, evict, interruptible,
+					    no_wait, new_mem);
+	} else if (old_mem->mem_type == TTM_PL_SYSTEM &&
+		   new_mem->mem_type == TTM_PL_VRAM) {
+		return radeon_move_ram_vram(bo, evict, interruptible,
+					    no_wait, new_mem);
+	} else {
+		r = radeon_move_blit(bo, evict, no_wait, new_mem, old_mem);
+		if (unlikely(r)) {
+			return r;
+		}
+	}
+	return r;
+}
+
+const uint32_t radeon_mem_prios[] = {
+	TTM_PL_VRAM,
+	TTM_PL_TT,
+	TTM_PL_SYSTEM,
+};
+
+const uint32_t radeon_busy_prios[] = {
+	TTM_PL_TT,
+	TTM_PL_VRAM,
+	TTM_PL_SYSTEM,
+};
+
+static int radeon_sync_obj_wait(void *sync_obj, void *sync_arg,
+				bool lazy, bool interruptible)
+{
+	return radeon_fence_wait((struct radeon_fence *)sync_obj, interruptible);
+}
+
+static int radeon_sync_obj_flush(void *sync_obj, void *sync_arg)
+{
+	return 0;
+}
+
+static void radeon_sync_obj_unref(void **sync_obj)
+{
+	radeon_fence_unref((struct radeon_fence **)sync_obj);
+}
+
+static void *radeon_sync_obj_ref(void *sync_obj)
+{
+	return radeon_fence_ref((struct radeon_fence *)sync_obj);
+}
+
+static bool radeon_sync_obj_signaled(void *sync_obj, void *sync_arg)
+{
+	return radeon_fence_signaled((struct radeon_fence *)sync_obj);
+}
+
+static struct ttm_bo_driver radeon_bo_driver = {
+	.mem_type_prio = radeon_mem_prios,
+	.mem_busy_prio = radeon_busy_prios,
+	.num_mem_type_prio = ARRAY_SIZE(radeon_mem_prios),
+	.num_mem_busy_prio = ARRAY_SIZE(radeon_busy_prios),
+	.create_ttm_backend_entry = &radeon_create_ttm_backend_entry,
+	.invalidate_caches = &radeon_invalidate_caches,
+	.init_mem_type = &radeon_init_mem_type,
+	.evict_flags = &radeon_evict_flags,
+	.move = &radeon_bo_move,
+	.verify_access = &radeon_verify_access,
+	.sync_obj_signaled = &radeon_sync_obj_signaled,
+	.sync_obj_wait = &radeon_sync_obj_wait,
+	.sync_obj_flush = &radeon_sync_obj_flush,
+	.sync_obj_unref = &radeon_sync_obj_unref,
+	.sync_obj_ref = &radeon_sync_obj_ref,
+};
+
+int radeon_ttm_init(struct radeon_device *rdev)
+{
+	int r;
+
+	r = radeon_ttm_global_init(rdev);
+	if (r) {
+		return r;
+	}
+	/* No others user of address space so set it to 0 */
+	r = ttm_bo_device_init(&rdev->mman.bdev,
+			       rdev->mman.mem_global_ref.object,
+			       &radeon_bo_driver, DRM_FILE_PAGE_OFFSET);
+	if (r) {
+		DRM_ERROR("failed initializing buffer object driver(%d).\n", r);
+		return r;
+	}
+	r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, 0,
+			   ((rdev->mc.aper_size) >> PAGE_SHIFT));
+	if (r) {
+		DRM_ERROR("Failed initializing VRAM heap.\n");
+		return r;
+	}
+	r = radeon_object_create(rdev, NULL, 256 * 1024, true,
+				 RADEON_GEM_DOMAIN_VRAM, false,
+				 &rdev->stollen_vga_memory);
+	if (r) {
+		return r;
+	}
+	r = radeon_object_pin(rdev->stollen_vga_memory, RADEON_GEM_DOMAIN_VRAM, NULL);
+	if (r) {
+		radeon_object_unref(&rdev->stollen_vga_memory);
+		return r;
+	}
+	DRM_INFO("radeon: %uM of VRAM memory ready\n",
+		 rdev->mc.vram_size / (1024 * 1024));
+	r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, 0,
+			   ((rdev->mc.gtt_size) >> PAGE_SHIFT));
+	if (r) {
+		DRM_ERROR("Failed initializing GTT heap.\n");
+		return r;
+	}
+	DRM_INFO("radeon: %uM of GTT memory ready.\n",
+		 rdev->mc.gtt_size / (1024 * 1024));
+	if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
+		rdev->mman.bdev.dev_mapping = rdev->ddev->dev_mapping;
+	}
+	return 0;
+}
+
+void radeon_ttm_fini(struct radeon_device *rdev)
+{
+	if (rdev->stollen_vga_memory) {
+		radeon_object_unpin(rdev->stollen_vga_memory);
+		radeon_object_unref(&rdev->stollen_vga_memory);
+	}
+	ttm_bo_clean_mm(&rdev->mman.bdev, TTM_PL_VRAM);
+	ttm_bo_clean_mm(&rdev->mman.bdev, TTM_PL_TT);
+	ttm_bo_device_release(&rdev->mman.bdev);
+	radeon_gart_fini(rdev);
+	radeon_ttm_global_fini(rdev);
+	DRM_INFO("radeon: ttm finalized\n");
+}
+
+static struct vm_operations_struct radeon_ttm_vm_ops;
+static struct vm_operations_struct *ttm_vm_ops = NULL;
+
+static int radeon_ttm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct ttm_buffer_object *bo;
+	int r;
+
+	bo = (struct ttm_buffer_object *)vma->vm_private_data;
+	if (bo == NULL) {
+		return VM_FAULT_NOPAGE;
+	}
+	r = ttm_vm_ops->fault(vma, vmf);
+	return r;
+}
+
+int radeon_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct drm_file *file_priv;
+	struct radeon_device *rdev;
+	int r;
+
+	if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET)) {
+		return drm_mmap(filp, vma);
+	}
+
+	file_priv = (struct drm_file *)filp->private_data;
+	rdev = file_priv->minor->dev->dev_private;
+	if (rdev == NULL) {
+		return -EINVAL;
+	}
+	r = ttm_bo_mmap(filp, vma, &rdev->mman.bdev);
+	if (unlikely(r != 0)) {
+		return r;
+	}
+	if (unlikely(ttm_vm_ops == NULL)) {
+		ttm_vm_ops = vma->vm_ops;
+		radeon_ttm_vm_ops = *ttm_vm_ops;
+		radeon_ttm_vm_ops.fault = &radeon_ttm_fault;
+	}
+	vma->vm_ops = &radeon_ttm_vm_ops;
+	return 0;
+}
+
+
+/*
+ * TTM backend functions.
+ */
+struct radeon_ttm_backend {
+	struct ttm_backend		backend;
+	struct radeon_device		*rdev;
+	unsigned long			num_pages;
+	struct page			**pages;
+	struct page			*dummy_read_page;
+	bool				populated;
+	bool				bound;
+	unsigned			offset;
+};
+
+static int radeon_ttm_backend_populate(struct ttm_backend *backend,
+				       unsigned long num_pages,
+				       struct page **pages,
+				       struct page *dummy_read_page)
+{
+	struct radeon_ttm_backend *gtt;
+
+	gtt = container_of(backend, struct radeon_ttm_backend, backend);
+	gtt->pages = pages;
+	gtt->num_pages = num_pages;
+	gtt->dummy_read_page = dummy_read_page;
+	gtt->populated = true;
+	return 0;
+}
+
+static void radeon_ttm_backend_clear(struct ttm_backend *backend)
+{
+	struct radeon_ttm_backend *gtt;
+
+	gtt = container_of(backend, struct radeon_ttm_backend, backend);
+	gtt->pages = NULL;
+	gtt->num_pages = 0;
+	gtt->dummy_read_page = NULL;
+	gtt->populated = false;
+	gtt->bound = false;
+}
+
+
+static int radeon_ttm_backend_bind(struct ttm_backend *backend,
+				   struct ttm_mem_reg *bo_mem)
+{
+	struct radeon_ttm_backend *gtt;
+	int r;
+
+	gtt = container_of(backend, struct radeon_ttm_backend, backend);
+	gtt->offset = bo_mem->mm_node->start << PAGE_SHIFT;
+	if (!gtt->num_pages) {
+		WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n", gtt->num_pages, bo_mem, backend);
+	}
+	r = radeon_gart_bind(gtt->rdev, gtt->offset,
+			     gtt->num_pages, gtt->pages);
+	if (r) {
+		DRM_ERROR("failed to bind %lu pages at 0x%08X\n",
+			  gtt->num_pages, gtt->offset);
+		return r;
+	}
+	gtt->bound = true;
+	return 0;
+}
+
+static int radeon_ttm_backend_unbind(struct ttm_backend *backend)
+{
+	struct radeon_ttm_backend *gtt;
+
+	gtt = container_of(backend, struct radeon_ttm_backend, backend);
+	radeon_gart_unbind(gtt->rdev, gtt->offset, gtt->num_pages);
+	gtt->bound = false;
+	return 0;
+}
+
+static void radeon_ttm_backend_destroy(struct ttm_backend *backend)
+{
+	struct radeon_ttm_backend *gtt;
+
+	gtt = container_of(backend, struct radeon_ttm_backend, backend);
+	if (gtt->bound) {
+		radeon_ttm_backend_unbind(backend);
+	}
+	kfree(gtt);
+}
+
+static struct ttm_backend_func radeon_backend_func = {
+	.populate = &radeon_ttm_backend_populate,
+	.clear = &radeon_ttm_backend_clear,
+	.bind = &radeon_ttm_backend_bind,
+	.unbind = &radeon_ttm_backend_unbind,
+	.destroy = &radeon_ttm_backend_destroy,
+};
+
+struct ttm_backend *radeon_ttm_backend_create(struct radeon_device *rdev)
+{
+	struct radeon_ttm_backend *gtt;
+
+	gtt = kzalloc(sizeof(struct radeon_ttm_backend), GFP_KERNEL);
+	if (gtt == NULL) {
+		return NULL;
+	}
+	gtt->backend.bdev = &rdev->mman.bdev;
+	gtt->backend.flags = 0;
+	gtt->backend.func = &radeon_backend_func;
+	gtt->rdev = rdev;
+	gtt->pages = NULL;
+	gtt->num_pages = 0;
+	gtt->dummy_read_page = NULL;
+	gtt->populated = false;
+	gtt->bound = false;
+	return &gtt->backend;
+}
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
new file mode 100644
index 00000000000..cc074b5a8f7
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -0,0 +1,411 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include <linux/seq_file.h>
+#include <drm/drmP.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* rs400,rs480 depends on : */
+void r100_hdp_reset(struct radeon_device *rdev);
+void r100_mc_disable_clients(struct radeon_device *rdev);
+int r300_mc_wait_for_idle(struct radeon_device *rdev);
+void r420_pipes_init(struct radeon_device *rdev);
+
+/* This files gather functions specifics to :
+ * rs400,rs480
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+void rs400_gpu_init(struct radeon_device *rdev);
+int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
+
+
+/*
+ * GART functions.
+ */
+void rs400_gart_adjust_size(struct radeon_device *rdev)
+{
+	/* Check gart size */
+	switch (rdev->mc.gtt_size/(1024*1024)) {
+	case 32:
+	case 64:
+	case 128:
+	case 256:
+	case 512:
+	case 1024:
+	case 2048:
+		break;
+	default:
+		DRM_ERROR("Unable to use IGP GART size %uM\n",
+			  rdev->mc.gtt_size >> 20);
+		DRM_ERROR("Valid GART size for IGP are 32M,64M,128M,256M,512M,1G,2G\n");
+		DRM_ERROR("Forcing to 32M GART size\n");
+		rdev->mc.gtt_size = 32 * 1024 * 1024;
+		return;
+	}
+	if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
+		/* FIXME: RS400 & RS480 seems to have issue with GART size
+		 * if 4G of system memory (needs more testing) */
+		rdev->mc.gtt_size = 32 * 1024 * 1024;
+		DRM_ERROR("Forcing to 32M GART size (because of ASIC bug ?)\n");
+	}
+}
+
+void rs400_gart_tlb_flush(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	unsigned int timeout = rdev->usec_timeout;
+
+	WREG32_MC(RS480_GART_CACHE_CNTRL, RS480_GART_CACHE_INVALIDATE);
+	do {
+		tmp = RREG32_MC(RS480_GART_CACHE_CNTRL);
+		if ((tmp & RS480_GART_CACHE_INVALIDATE) == 0)
+			break;
+		DRM_UDELAY(1);
+		timeout--;
+	} while (timeout > 0);
+	WREG32_MC(RS480_GART_CACHE_CNTRL, 0);
+}
+
+int rs400_gart_enable(struct radeon_device *rdev)
+{
+	uint32_t size_reg;
+	uint32_t tmp;
+	int r;
+
+	/* Initialize common gart structure */
+	r = radeon_gart_init(rdev);
+	if (r) {
+		return r;
+	}
+	if (rs400_debugfs_pcie_gart_info_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RS400 GART !\n");
+	}
+
+	tmp = RREG32_MC(RS690_AIC_CTRL_SCRATCH);
+	tmp |= RS690_DIS_OUT_OF_PCI_GART_ACCESS;
+	WREG32_MC(RS690_AIC_CTRL_SCRATCH, tmp);
+	/* Check gart size */
+	switch(rdev->mc.gtt_size / (1024 * 1024)) {
+	case 32:
+		size_reg = RS480_VA_SIZE_32MB;
+		break;
+	case 64:
+		size_reg = RS480_VA_SIZE_64MB;
+		break;
+	case 128:
+		size_reg = RS480_VA_SIZE_128MB;
+		break;
+	case 256:
+		size_reg = RS480_VA_SIZE_256MB;
+		break;
+	case 512:
+		size_reg = RS480_VA_SIZE_512MB;
+		break;
+	case 1024:
+		size_reg = RS480_VA_SIZE_1GB;
+		break;
+	case 2048:
+		size_reg = RS480_VA_SIZE_2GB;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (rdev->gart.table.ram.ptr == NULL) {
+		rdev->gart.table_size = rdev->gart.num_gpu_pages * 4;
+		r = radeon_gart_table_ram_alloc(rdev);
+		if (r) {
+			return r;
+		}
+	}
+	/* It should be fine to program it to max value */
+	if (rdev->family == CHIP_RS690 || (rdev->family == CHIP_RS740)) {
+		WREG32_MC(RS690_MCCFG_AGP_BASE, 0xFFFFFFFF);
+		WREG32_MC(RS690_MCCFG_AGP_BASE_2, 0);
+	} else {
+		WREG32(RADEON_AGP_BASE, 0xFFFFFFFF);
+		WREG32(RS480_AGP_BASE_2, 0);
+	}
+	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+	tmp = REG_SET(RS690_MC_AGP_TOP, tmp >> 16);
+	tmp |= REG_SET(RS690_MC_AGP_START, rdev->mc.gtt_location >> 16);
+	if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) {
+		WREG32_MC(RS690_MCCFG_AGP_LOCATION, tmp);
+		tmp = RREG32(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS;
+		WREG32(RADEON_BUS_CNTL, tmp);
+	} else {
+		WREG32(RADEON_MC_AGP_LOCATION, tmp);
+		tmp = RREG32(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS;
+		WREG32(RADEON_BUS_CNTL, tmp);
+	}
+	/* Table should be in 32bits address space so ignore bits above. */
+	tmp = rdev->gart.table_addr & 0xfffff000;
+	WREG32_MC(RS480_GART_BASE, tmp);
+	/* TODO: more tweaking here */
+	WREG32_MC(RS480_GART_FEATURE_ID,
+		  (RS480_TLB_ENABLE |
+		   RS480_GTW_LAC_EN | RS480_1LEVEL_GART));
+	/* Disable snooping */
+	WREG32_MC(RS480_AGP_MODE_CNTL,
+		  (1 << RS480_REQ_TYPE_SNOOP_SHIFT) | RS480_REQ_TYPE_SNOOP_DIS);
+	/* Disable AGP mode */
+	/* FIXME: according to doc we should set HIDE_MMCFG_BAR=0,
+	 * AGPMODE30=0 & AGP30ENHANCED=0 in NB_CNTL */
+	if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) {
+		WREG32_MC(RS480_MC_MISC_CNTL,
+			  (RS480_GART_INDEX_REG_EN | RS690_BLOCK_GFX_D3_EN));
+	} else {
+		WREG32_MC(RS480_MC_MISC_CNTL, RS480_GART_INDEX_REG_EN);
+	}
+	/* Enable gart */
+	WREG32_MC(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN | size_reg));
+	rs400_gart_tlb_flush(rdev);
+	rdev->gart.ready = true;
+	return 0;
+}
+
+void rs400_gart_disable(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	tmp = RREG32_MC(RS690_AIC_CTRL_SCRATCH);
+	tmp |= RS690_DIS_OUT_OF_PCI_GART_ACCESS;
+	WREG32_MC(RS690_AIC_CTRL_SCRATCH, tmp);
+	WREG32_MC(RS480_AGP_ADDRESS_SPACE_SIZE, 0);
+}
+
+int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
+{
+	if (i < 0 || i > rdev->gart.num_gpu_pages) {
+		return -EINVAL;
+	}
+	rdev->gart.table.ram.ptr[i] = cpu_to_le32(((uint32_t)addr) | 0xC);
+	return 0;
+}
+
+
+/*
+ * MC functions.
+ */
+int rs400_mc_init(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int r;
+
+	if (r100_debugfs_rbbm_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+	}
+
+	rs400_gpu_init(rdev);
+	rs400_gart_disable(rdev);
+	rdev->mc.gtt_location = rdev->mc.vram_size;
+	rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
+	rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	r = radeon_mc_setup(rdev);
+	if (r) {
+		return r;
+	}
+
+	r100_mc_disable_clients(rdev);
+	if (r300_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
+	tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32(RADEON_MC_FB_LOCATION, tmp);
+	tmp = RREG32(RADEON_HOST_PATH_CNTL) | RADEON_HP_LIN_RD_CACHE_DIS;
+	WREG32(RADEON_HOST_PATH_CNTL, tmp | RADEON_HDP_SOFT_RESET | RADEON_HDP_READ_BUFFER_INVALIDATE);
+	(void)RREG32(RADEON_HOST_PATH_CNTL);
+	WREG32(RADEON_HOST_PATH_CNTL, tmp);
+	(void)RREG32(RADEON_HOST_PATH_CNTL);
+	return 0;
+}
+
+void rs400_mc_fini(struct radeon_device *rdev)
+{
+	rs400_gart_disable(rdev);
+	radeon_gart_table_ram_free(rdev);
+	radeon_gart_fini(rdev);
+}
+
+
+/*
+ * Global GPU functions
+ */
+void rs400_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+void rs400_gpu_init(struct radeon_device *rdev)
+{
+	/* FIXME: HDP same place on rs400 ? */
+	r100_hdp_reset(rdev);
+	/* FIXME: is this correct ? */
+	r420_pipes_init(rdev);
+	if (r300_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+}
+
+
+/*
+ * VRAM info.
+ */
+void rs400_vram_info(struct radeon_device *rdev)
+{
+	uint32_t tom;
+
+	rs400_gart_adjust_size(rdev);
+	/* DDR for all card after R300 & IGP */
+	rdev->mc.vram_is_ddr = true;
+	rdev->mc.vram_width = 128;
+
+	/* read NB_TOM to get the amount of ram stolen for the GPU */
+	tom = RREG32(RADEON_NB_TOM);
+	rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+
+	/* Could aper size report 0 ? */
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+}
+
+
+/*
+ * Indirect registers accessor
+ */
+uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t r;
+
+	WREG32(RS480_NB_MC_INDEX, reg & 0xff);
+	r = RREG32(RS480_NB_MC_DATA);
+	WREG32(RS480_NB_MC_INDEX, 0xff);
+	return r;
+}
+
+void rs400_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG32(RS480_NB_MC_INDEX, ((reg) & 0xff) | RS480_NB_MC_IND_WR_EN);
+	WREG32(RS480_NB_MC_DATA, (v));
+	WREG32(RS480_NB_MC_INDEX, 0xff);
+}
+
+
+/*
+ * Debugfs info
+ */
+#if defined(CONFIG_DEBUG_FS)
+static int rs400_debugfs_gart_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = RREG32(RADEON_HOST_PATH_CNTL);
+	seq_printf(m, "HOST_PATH_CNTL 0x%08x\n", tmp);
+	tmp = RREG32(RADEON_BUS_CNTL);
+	seq_printf(m, "BUS_CNTL 0x%08x\n", tmp);
+	tmp = RREG32_MC(RS690_AIC_CTRL_SCRATCH);
+	seq_printf(m, "AIC_CTRL_SCRATCH 0x%08x\n", tmp);
+	if (rdev->family == CHIP_RS690 || (rdev->family == CHIP_RS740)) {
+		tmp = RREG32_MC(RS690_MCCFG_AGP_BASE);
+		seq_printf(m, "MCCFG_AGP_BASE 0x%08x\n", tmp);
+		tmp = RREG32_MC(RS690_MCCFG_AGP_BASE_2);
+		seq_printf(m, "MCCFG_AGP_BASE_2 0x%08x\n", tmp);
+		tmp = RREG32_MC(RS690_MCCFG_AGP_LOCATION);
+		seq_printf(m, "MCCFG_AGP_LOCATION 0x%08x\n", tmp);
+		tmp = RREG32_MC(0x100);
+		seq_printf(m, "MCCFG_FB_LOCATION 0x%08x\n", tmp);
+		tmp = RREG32(0x134);
+		seq_printf(m, "HDP_FB_LOCATION 0x%08x\n", tmp);
+	} else {
+		tmp = RREG32(RADEON_AGP_BASE);
+		seq_printf(m, "AGP_BASE 0x%08x\n", tmp);
+		tmp = RREG32(RS480_AGP_BASE_2);
+		seq_printf(m, "AGP_BASE_2 0x%08x\n", tmp);
+		tmp = RREG32(RADEON_MC_AGP_LOCATION);
+		seq_printf(m, "MC_AGP_LOCATION 0x%08x\n", tmp);
+	}
+	tmp = RREG32_MC(RS480_GART_BASE);
+	seq_printf(m, "GART_BASE 0x%08x\n", tmp);
+	tmp = RREG32_MC(RS480_GART_FEATURE_ID);
+	seq_printf(m, "GART_FEATURE_ID 0x%08x\n", tmp);
+	tmp = RREG32_MC(RS480_AGP_MODE_CNTL);
+	seq_printf(m, "AGP_MODE_CONTROL 0x%08x\n", tmp);
+	tmp = RREG32_MC(RS480_MC_MISC_CNTL);
+	seq_printf(m, "MC_MISC_CNTL 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x5F);
+	seq_printf(m, "MC_MISC_UMA_CNTL 0x%08x\n", tmp);
+	tmp = RREG32_MC(RS480_AGP_ADDRESS_SPACE_SIZE);
+	seq_printf(m, "AGP_ADDRESS_SPACE_SIZE 0x%08x\n", tmp);
+	tmp = RREG32_MC(RS480_GART_CACHE_CNTRL);
+	seq_printf(m, "GART_CACHE_CNTRL 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x3B);
+	seq_printf(m, "MC_GART_ERROR_ADDRESS 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x3C);
+	seq_printf(m, "MC_GART_ERROR_ADDRESS_HI 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x30);
+	seq_printf(m, "GART_ERROR_0 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x31);
+	seq_printf(m, "GART_ERROR_1 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x32);
+	seq_printf(m, "GART_ERROR_2 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x33);
+	seq_printf(m, "GART_ERROR_3 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x34);
+	seq_printf(m, "GART_ERROR_4 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x35);
+	seq_printf(m, "GART_ERROR_5 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x36);
+	seq_printf(m, "GART_ERROR_6 0x%08x\n", tmp);
+	tmp = RREG32_MC(0x37);
+	seq_printf(m, "GART_ERROR_7 0x%08x\n", tmp);
+	return 0;
+}
+
+static struct drm_info_list rs400_gart_info_list[] = {
+	{"rs400_gart_info", rs400_debugfs_gart_info, 0, NULL},
+};
+#endif
+
+int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, rs400_gart_info_list, 1);
+#else
+	return 0;
+#endif
+}
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
new file mode 100644
index 00000000000..ab0c967553e
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* rs600 depends on : */
+void r100_hdp_reset(struct radeon_device *rdev);
+int r100_gui_wait_for_idle(struct radeon_device *rdev);
+int r300_mc_wait_for_idle(struct radeon_device *rdev);
+void r420_pipes_init(struct radeon_device *rdev);
+
+/* This files gather functions specifics to :
+ * rs600
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+void rs600_gpu_init(struct radeon_device *rdev);
+int rs600_mc_wait_for_idle(struct radeon_device *rdev);
+void rs600_disable_vga(struct radeon_device *rdev);
+
+
+/*
+ * GART.
+ */
+void rs600_gart_tlb_flush(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
+	tmp &= ~(RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE);
+	WREG32_MC(RS600_MC_PT0_CNTL, tmp);
+
+	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
+	tmp |= RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE;
+	WREG32_MC(RS600_MC_PT0_CNTL, tmp);
+
+	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
+	tmp &= ~(RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE);
+	WREG32_MC(RS600_MC_PT0_CNTL, tmp);
+	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
+}
+
+int rs600_gart_enable(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int i;
+	int r;
+
+	/* Initialize common gart structure */
+	r = radeon_gart_init(rdev);
+	if (r) {
+		return r;
+	}
+	rdev->gart.table_size = rdev->gart.num_gpu_pages * 8;
+	r = radeon_gart_table_vram_alloc(rdev);
+	if (r) {
+		return r;
+	}
+	/* FIXME: setup default page */
+	WREG32_MC(RS600_MC_PT0_CNTL,
+		 (RS600_EFFECTIVE_L2_CACHE_SIZE(6) |
+		  RS600_EFFECTIVE_L2_QUEUE_SIZE(6)));
+	for (i = 0; i < 19; i++) {
+		WREG32_MC(RS600_MC_PT0_CLIENT0_CNTL + i,
+			 (RS600_ENABLE_TRANSLATION_MODE_OVERRIDE |
+			  RS600_SYSTEM_ACCESS_MODE_IN_SYS |
+			  RS600_SYSTEM_APERTURE_UNMAPPED_ACCESS_DEFAULT_PAGE |
+			  RS600_EFFECTIVE_L1_CACHE_SIZE(3) |
+			  RS600_ENABLE_FRAGMENT_PROCESSING |
+			  RS600_EFFECTIVE_L1_QUEUE_SIZE(3)));
+	}
+
+	/* System context map to GART space */
+	WREG32_MC(RS600_MC_PT0_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.gtt_location);
+	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+	WREG32_MC(RS600_MC_PT0_SYSTEM_APERTURE_HIGH_ADDR, tmp);
+
+	/* enable first context */
+	WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_START_ADDR, rdev->mc.gtt_location);
+	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+	WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_END_ADDR, tmp);
+	WREG32_MC(RS600_MC_PT0_CONTEXT0_CNTL,
+		 (RS600_ENABLE_PAGE_TABLE | RS600_PAGE_TABLE_TYPE_FLAT));
+	/* disable all other contexts */
+	for (i = 1; i < 8; i++) {
+		WREG32_MC(RS600_MC_PT0_CONTEXT0_CNTL + i, 0);
+	}
+
+	/* setup the page table */
+	WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_BASE_ADDR,
+		 rdev->gart.table_addr);
+	WREG32_MC(RS600_MC_PT0_CONTEXT0_DEFAULT_READ_ADDR, 0);
+
+	/* enable page tables */
+	tmp = RREG32_MC(RS600_MC_PT0_CNTL);
+	WREG32_MC(RS600_MC_PT0_CNTL, (tmp | RS600_ENABLE_PT));
+	tmp = RREG32_MC(RS600_MC_CNTL1);
+	WREG32_MC(RS600_MC_CNTL1, (tmp | RS600_ENABLE_PAGE_TABLES));
+	rs600_gart_tlb_flush(rdev);
+	rdev->gart.ready = true;
+	return 0;
+}
+
+void rs600_gart_disable(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	/* FIXME: disable out of gart access */
+	WREG32_MC(RS600_MC_PT0_CNTL, 0);
+	tmp = RREG32_MC(RS600_MC_CNTL1);
+	tmp &= ~RS600_ENABLE_PAGE_TABLES;
+	WREG32_MC(RS600_MC_CNTL1, tmp);
+	radeon_object_kunmap(rdev->gart.table.vram.robj);
+	radeon_object_unpin(rdev->gart.table.vram.robj);
+}
+
+#define R600_PTE_VALID     (1 << 0)
+#define R600_PTE_SYSTEM    (1 << 1)
+#define R600_PTE_SNOOPED   (1 << 2)
+#define R600_PTE_READABLE  (1 << 5)
+#define R600_PTE_WRITEABLE (1 << 6)
+
+int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
+{
+	void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+
+	if (i < 0 || i > rdev->gart.num_gpu_pages) {
+		return -EINVAL;
+	}
+	addr = addr & 0xFFFFFFFFFFFFF000ULL;
+	addr |= R600_PTE_VALID | R600_PTE_SYSTEM | R600_PTE_SNOOPED;
+	addr |= R600_PTE_READABLE | R600_PTE_WRITEABLE;
+	writeq(addr, ((void __iomem *)ptr) + (i * 8));
+	return 0;
+}
+
+
+/*
+ * MC.
+ */
+void rs600_mc_disable_clients(struct radeon_device *rdev)
+{
+	unsigned tmp;
+
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	tmp = RREG32(AVIVO_D1VGA_CONTROL);
+	WREG32(AVIVO_D1VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE);
+	tmp = RREG32(AVIVO_D2VGA_CONTROL);
+	WREG32(AVIVO_D2VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE);
+
+	tmp = RREG32(AVIVO_D1CRTC_CONTROL);
+	WREG32(AVIVO_D1CRTC_CONTROL, tmp & ~AVIVO_CRTC_EN);
+	tmp = RREG32(AVIVO_D2CRTC_CONTROL);
+	WREG32(AVIVO_D2CRTC_CONTROL, tmp & ~AVIVO_CRTC_EN);
+
+	/* make sure all previous write got through */
+	tmp = RREG32(AVIVO_D2CRTC_CONTROL);
+
+	mdelay(1);
+}
+
+int rs600_mc_init(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int r;
+
+	if (r100_debugfs_rbbm_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+	}
+
+	rs600_gpu_init(rdev);
+	rs600_gart_disable(rdev);
+
+	/* Setup GPU memory space */
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	rdev->mc.gtt_location = 0xFFFFFFFFUL;
+	r = radeon_mc_setup(rdev);
+	if (r) {
+		return r;
+	}
+
+	/* Program GPU memory space */
+	/* Enable bus master */
+	tmp = RREG32(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS;
+	WREG32(RADEON_BUS_CNTL, tmp);
+	/* FIXME: What does AGP means for such chipset ? */
+	WREG32_MC(RS600_MC_AGP_LOCATION, 0x0FFFFFFF);
+	/* FIXME: are this AGP reg in indirect MC range ? */
+	WREG32_MC(RS600_MC_AGP_BASE, 0);
+	WREG32_MC(RS600_MC_AGP_BASE_2, 0);
+	rs600_mc_disable_clients(rdev);
+	if (rs600_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16);
+	tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32_MC(RS600_MC_FB_LOCATION, tmp);
+	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+	return 0;
+}
+
+void rs600_mc_fini(struct radeon_device *rdev)
+{
+	rs600_gart_disable(rdev);
+	radeon_gart_table_vram_free(rdev);
+	radeon_gart_fini(rdev);
+}
+
+
+/*
+ * Global GPU functions
+ */
+void rs600_disable_vga(struct radeon_device *rdev)
+{
+	unsigned tmp;
+
+	WREG32(0x330, 0);
+	WREG32(0x338, 0);
+	tmp = RREG32(0x300);
+	tmp &= ~(3 << 16);
+	WREG32(0x300, tmp);
+	WREG32(0x308, (1 << 8));
+	WREG32(0x310, rdev->mc.vram_location);
+	WREG32(0x594, 0);
+}
+
+int rs600_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		/* read MC_STATUS */
+		tmp = RREG32_MC(RS600_MC_STATUS);
+		if (tmp & RS600_MC_STATUS_IDLE) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
+void rs600_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+void rs600_gpu_init(struct radeon_device *rdev)
+{
+	/* FIXME: HDP same place on rs600 ? */
+	r100_hdp_reset(rdev);
+	rs600_disable_vga(rdev);
+	/* FIXME: is this correct ? */
+	r420_pipes_init(rdev);
+	if (rs600_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+}
+
+
+/*
+ * VRAM info.
+ */
+void rs600_vram_info(struct radeon_device *rdev)
+{
+	/* FIXME: to do or is these values sane ? */
+	rdev->mc.vram_is_ddr = true;
+	rdev->mc.vram_width = 128;
+}
+
+
+/*
+ * Indirect registers accessor
+ */
+uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t r;
+
+	WREG32(RS600_MC_INDEX,
+	       ((reg & RS600_MC_ADDR_MASK) | RS600_MC_IND_CITF_ARB0));
+	r = RREG32(RS600_MC_DATA);
+	return r;
+}
+
+void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG32(RS600_MC_INDEX,
+		RS600_MC_IND_WR_EN | RS600_MC_IND_CITF_ARB0 |
+		((reg) & RS600_MC_ADDR_MASK));
+	WREG32(RS600_MC_DATA, v);
+}
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
new file mode 100644
index 00000000000..79ba85042b5
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* rs690,rs740 depends on : */
+void r100_hdp_reset(struct radeon_device *rdev);
+int r300_mc_wait_for_idle(struct radeon_device *rdev);
+void r420_pipes_init(struct radeon_device *rdev);
+void rs400_gart_disable(struct radeon_device *rdev);
+int rs400_gart_enable(struct radeon_device *rdev);
+void rs400_gart_adjust_size(struct radeon_device *rdev);
+void rs600_mc_disable_clients(struct radeon_device *rdev);
+void rs600_disable_vga(struct radeon_device *rdev);
+
+/* This files gather functions specifics to :
+ * rs690,rs740
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+void rs690_gpu_init(struct radeon_device *rdev);
+int rs690_mc_wait_for_idle(struct radeon_device *rdev);
+
+
+/*
+ * MC functions.
+ */
+int rs690_mc_init(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int r;
+
+	if (r100_debugfs_rbbm_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+	}
+
+	rs690_gpu_init(rdev);
+	rs400_gart_disable(rdev);
+
+	/* Setup GPU memory space */
+	rdev->mc.gtt_location = rdev->mc.vram_size;
+	rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
+	rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	r = radeon_mc_setup(rdev);
+	if (r) {
+		return r;
+	}
+
+	/* Program GPU memory space */
+	rs600_mc_disable_clients(rdev);
+	if (rs690_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16);
+	tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp);
+	/* FIXME: Does this reg exist on RS480,RS740 ? */
+	WREG32(0x310, rdev->mc.vram_location);
+	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+	return 0;
+}
+
+void rs690_mc_fini(struct radeon_device *rdev)
+{
+	rs400_gart_disable(rdev);
+	radeon_gart_table_ram_free(rdev);
+	radeon_gart_fini(rdev);
+}
+
+
+/*
+ * Global GPU functions
+ */
+int rs690_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		/* read MC_STATUS */
+		tmp = RREG32_MC(RS690_MC_STATUS);
+		if (tmp & RS690_MC_STATUS_IDLE) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
+void rs690_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+void rs690_gpu_init(struct radeon_device *rdev)
+{
+	/* FIXME: HDP same place on rs690 ? */
+	r100_hdp_reset(rdev);
+	rs600_disable_vga(rdev);
+	/* FIXME: is this correct ? */
+	r420_pipes_init(rdev);
+	if (rs690_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+}
+
+
+/*
+ * VRAM info.
+ */
+void rs690_vram_info(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	rs400_gart_adjust_size(rdev);
+	/* DDR for all card after R300 & IGP */
+	rdev->mc.vram_is_ddr = true;
+	/* FIXME: is this correct for RS690/RS740 ? */
+	tmp = RREG32(RADEON_MEM_CNTL);
+	if (tmp & R300_MEM_NUM_CHANNELS_MASK) {
+		rdev->mc.vram_width = 128;
+	} else {
+		rdev->mc.vram_width = 64;
+	}
+	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+}
+
+
+/*
+ * Indirect registers accessor
+ */
+uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t r;
+
+	WREG32(RS690_MC_INDEX, (reg & RS690_MC_INDEX_MASK));
+	r = RREG32(RS690_MC_DATA);
+	WREG32(RS690_MC_INDEX, RS690_MC_INDEX_MASK);
+	return r;
+}
+
+void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG32(RS690_MC_INDEX,
+	       RS690_MC_INDEX_WR_EN | ((reg) & RS690_MC_INDEX_MASK));
+	WREG32(RS690_MC_DATA, v);
+	WREG32(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK);
+}
diff --git a/drivers/gpu/drm/radeon/rs780.c b/drivers/gpu/drm/radeon/rs780.c
new file mode 100644
index 00000000000..0affcff8182
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs780.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* rs780  depends on : */
+void rs600_mc_disable_clients(struct radeon_device *rdev);
+
+/* This files gather functions specifics to:
+ * rs780
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+int rs780_mc_wait_for_idle(struct radeon_device *rdev);
+void rs780_gpu_init(struct radeon_device *rdev);
+
+
+/*
+ * MC
+ */
+int rs780_mc_init(struct radeon_device *rdev)
+{
+	rs780_gpu_init(rdev);
+	/* FIXME: implement */
+
+	rs600_mc_disable_clients(rdev);
+	if (rs780_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	return 0;
+}
+
+void rs780_mc_fini(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+}
+
+
+/*
+ * Global GPU functions
+ */
+void rs780_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+int rs780_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+	return 0;
+}
+
+void rs780_gpu_init(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+}
+
+
+/*
+ * VRAM info
+ */
+void rs780_vram_get_type(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+}
+
+void rs780_vram_info(struct radeon_device *rdev)
+{
+	rs780_vram_get_type(rdev);
+
+	/* FIXME: implement */
+	/* Could aper size report 0 ? */
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+}
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
new file mode 100644
index 00000000000..7eab95db58a
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -0,0 +1,504 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include <linux/seq_file.h>
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* rv515 depends on : */
+void r100_hdp_reset(struct radeon_device *rdev);
+int r100_cp_reset(struct radeon_device *rdev);
+int r100_rb2d_reset(struct radeon_device *rdev);
+int r100_gui_wait_for_idle(struct radeon_device *rdev);
+int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
+int rv370_pcie_gart_enable(struct radeon_device *rdev);
+void rv370_pcie_gart_disable(struct radeon_device *rdev);
+void r420_pipes_init(struct radeon_device *rdev);
+void rs600_mc_disable_clients(struct radeon_device *rdev);
+void rs600_disable_vga(struct radeon_device *rdev);
+
+/* This files gather functions specifics to:
+ * rv515
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
+int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
+void rv515_gpu_init(struct radeon_device *rdev);
+int rv515_mc_wait_for_idle(struct radeon_device *rdev);
+
+
+/*
+ * MC
+ */
+int rv515_mc_init(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	int r;
+
+	if (r100_debugfs_rbbm_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+	}
+	if (rv515_debugfs_pipes_info_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for pipes !\n");
+	}
+	if (rv515_debugfs_ga_info_init(rdev)) {
+		DRM_ERROR("Failed to register debugfs file for pipes !\n");
+	}
+
+	rv515_gpu_init(rdev);
+	rv370_pcie_gart_disable(rdev);
+
+	/* Setup GPU memory space */
+	rdev->mc.vram_location = 0xFFFFFFFFUL;
+	rdev->mc.gtt_location = 0xFFFFFFFFUL;
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r) {
+			printk(KERN_WARNING "[drm] Disabling AGP\n");
+			rdev->flags &= ~RADEON_IS_AGP;
+			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+		} else {
+			rdev->mc.gtt_location = rdev->mc.agp_base;
+		}
+	}
+	r = radeon_mc_setup(rdev);
+	if (r) {
+		return r;
+	}
+
+	/* Program GPU memory space */
+	rs600_mc_disable_clients(rdev);
+	if (rv515_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+	/* Write VRAM size in case we are limiting it */
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+	tmp = REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32(0x134, tmp);
+	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = REG_SET(RV515_MC_FB_TOP, tmp >> 16);
+	tmp |= REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32_MC(RV515_MC_FB_LOCATION, tmp);
+	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+	WREG32(0x310, rdev->mc.vram_location);
+	if (rdev->flags & RADEON_IS_AGP) {
+		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+		tmp = REG_SET(RV515_MC_AGP_TOP, tmp >> 16);
+		tmp |= REG_SET(RV515_MC_AGP_START, rdev->mc.gtt_location >> 16);
+		WREG32_MC(RV515_MC_AGP_LOCATION, tmp);
+		WREG32_MC(RV515_MC_AGP_BASE, rdev->mc.agp_base);
+		WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+	} else {
+		WREG32_MC(RV515_MC_AGP_LOCATION, 0x0FFFFFFF);
+		WREG32_MC(RV515_MC_AGP_BASE, 0);
+		WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+	}
+	return 0;
+}
+
+void rv515_mc_fini(struct radeon_device *rdev)
+{
+	rv370_pcie_gart_disable(rdev);
+	radeon_gart_table_vram_free(rdev);
+	radeon_gart_fini(rdev);
+}
+
+
+/*
+ * Global GPU functions
+ */
+void rv515_ring_start(struct radeon_device *rdev)
+{
+	unsigned gb_tile_config;
+	int r;
+
+	/* Sub pixel 1/12 so we can have 4K rendering according to doc */
+	gb_tile_config = R300_ENABLE_TILING | R300_TILE_SIZE_16;
+	switch (rdev->num_gb_pipes) {
+	case 2:
+		gb_tile_config |= R300_PIPE_COUNT_R300;
+		break;
+	case 3:
+		gb_tile_config |= R300_PIPE_COUNT_R420_3P;
+		break;
+	case 4:
+		gb_tile_config |= R300_PIPE_COUNT_R420;
+		break;
+	case 1:
+	default:
+		gb_tile_config |= R300_PIPE_COUNT_RV350;
+		break;
+	}
+
+	r = radeon_ring_lock(rdev, 64);
+	if (r) {
+		return;
+	}
+	radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0));
+	radeon_ring_write(rdev,
+			  RADEON_ISYNC_ANY2D_IDLE3D |
+			  RADEON_ISYNC_ANY3D_IDLE2D |
+			  RADEON_ISYNC_WAIT_IDLEGUI |
+			  RADEON_ISYNC_CPSCRATCH_IDLEGUI);
+	radeon_ring_write(rdev, PACKET0(R300_GB_TILE_CONFIG, 0));
+	radeon_ring_write(rdev, gb_tile_config);
+	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev,
+			  RADEON_WAIT_2D_IDLECLEAN |
+			  RADEON_WAIT_3D_IDLECLEAN);
+	radeon_ring_write(rdev, PACKET0(0x170C, 0));
+	radeon_ring_write(rdev, 1 << 31);
+	radeon_ring_write(rdev, PACKET0(R300_GB_SELECT, 0));
+	radeon_ring_write(rdev, 0);
+	radeon_ring_write(rdev, PACKET0(R300_GB_ENABLE, 0));
+	radeon_ring_write(rdev, 0);
+	radeon_ring_write(rdev, PACKET0(0x42C8, 0));
+	radeon_ring_write(rdev, (1 << rdev->num_gb_pipes) - 1);
+	radeon_ring_write(rdev, PACKET0(R500_VAP_INDEX_OFFSET, 0));
+	radeon_ring_write(rdev, 0);
+	radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
+	radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
+	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev,
+			  RADEON_WAIT_2D_IDLECLEAN |
+			  RADEON_WAIT_3D_IDLECLEAN);
+	radeon_ring_write(rdev, PACKET0(R300_GB_AA_CONFIG, 0));
+	radeon_ring_write(rdev, 0);
+	radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
+	radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
+	radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS0, 0));
+	radeon_ring_write(rdev,
+			  ((6 << R300_MS_X0_SHIFT) |
+			   (6 << R300_MS_Y0_SHIFT) |
+			   (6 << R300_MS_X1_SHIFT) |
+			   (6 << R300_MS_Y1_SHIFT) |
+			   (6 << R300_MS_X2_SHIFT) |
+			   (6 << R300_MS_Y2_SHIFT) |
+			   (6 << R300_MSBD0_Y_SHIFT) |
+			   (6 << R300_MSBD0_X_SHIFT)));
+	radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS1, 0));
+	radeon_ring_write(rdev,
+			  ((6 << R300_MS_X3_SHIFT) |
+			   (6 << R300_MS_Y3_SHIFT) |
+			   (6 << R300_MS_X4_SHIFT) |
+			   (6 << R300_MS_Y4_SHIFT) |
+			   (6 << R300_MS_X5_SHIFT) |
+			   (6 << R300_MS_Y5_SHIFT) |
+			   (6 << R300_MSBD1_SHIFT)));
+	radeon_ring_write(rdev, PACKET0(R300_GA_ENHANCE, 0));
+	radeon_ring_write(rdev, R300_GA_DEADLOCK_CNTL | R300_GA_FASTSYNC_CNTL);
+	radeon_ring_write(rdev, PACKET0(R300_GA_POLY_MODE, 0));
+	radeon_ring_write(rdev,
+			  R300_FRONT_PTYPE_TRIANGE | R300_BACK_PTYPE_TRIANGE);
+	radeon_ring_write(rdev, PACKET0(R300_GA_ROUND_MODE, 0));
+	radeon_ring_write(rdev,
+			  R300_GEOMETRY_ROUND_NEAREST |
+			  R300_COLOR_ROUND_NEAREST);
+	radeon_ring_unlock_commit(rdev);
+}
+
+void rv515_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+int rv515_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		/* read MC_STATUS */
+		tmp = RREG32_MC(RV515_MC_STATUS);
+		if (tmp & RV515_MC_STATUS_IDLE) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
+void rv515_gpu_init(struct radeon_device *rdev)
+{
+	unsigned pipe_select_current, gb_pipe_select, tmp;
+
+	r100_hdp_reset(rdev);
+	r100_rb2d_reset(rdev);
+
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "reseting GPU. Bad things might happen.\n");
+	}
+
+	rs600_disable_vga(rdev);
+
+	r420_pipes_init(rdev);
+	gb_pipe_select = RREG32(0x402C);
+	tmp = RREG32(0x170C);
+	pipe_select_current = (tmp >> 2) & 3;
+	tmp = (1 << pipe_select_current) |
+	      (((gb_pipe_select >> 8) & 0xF) << 4);
+	WREG32_PLL(0x000D, tmp);
+	if (r100_gui_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait GUI idle while "
+		       "reseting GPU. Bad things might happen.\n");
+	}
+	if (rv515_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+}
+
+int rv515_ga_reset(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	bool reinit_cp;
+	int i;
+
+	reinit_cp = rdev->cp.ready;
+	rdev->cp.ready = false;
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		WREG32(RADEON_CP_CSQ_MODE, 0);
+		WREG32(RADEON_CP_CSQ_CNTL, 0);
+		WREG32(RADEON_RBBM_SOFT_RESET, 0x32005);
+		(void)RREG32(RADEON_RBBM_SOFT_RESET);
+		udelay(200);
+		WREG32(RADEON_RBBM_SOFT_RESET, 0);
+		/* Wait to prevent race in RBBM_STATUS */
+		mdelay(1);
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (tmp & ((1 << 20) | (1 << 26))) {
+			DRM_ERROR("VAP & CP still busy (RBBM_STATUS=0x%08X)\n", tmp);
+			/* GA still busy soft reset it */
+			WREG32(0x429C, 0x200);
+			WREG32(R300_VAP_PVS_STATE_FLUSH_REG, 0);
+			WREG32(0x43E0, 0);
+			WREG32(0x43E4, 0);
+			WREG32(0x24AC, 0);
+		}
+		/* Wait to prevent race in RBBM_STATUS */
+		mdelay(1);
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (!(tmp & ((1 << 20) | (1 << 26)))) {
+			break;
+		}
+	}
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		tmp = RREG32(RADEON_RBBM_STATUS);
+		if (!(tmp & ((1 << 20) | (1 << 26)))) {
+			DRM_INFO("GA reset succeed (RBBM_STATUS=0x%08X)\n",
+				 tmp);
+			DRM_INFO("GA_IDLE=0x%08X\n", RREG32(0x425C));
+			DRM_INFO("RB3D_RESET_STATUS=0x%08X\n", RREG32(0x46f0));
+			DRM_INFO("ISYNC_CNTL=0x%08X\n", RREG32(0x1724));
+			if (reinit_cp) {
+				return r100_cp_init(rdev, rdev->cp.ring_size);
+			}
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	tmp = RREG32(RADEON_RBBM_STATUS);
+	DRM_ERROR("Failed to reset GA ! (RBBM_STATUS=0x%08X)\n", tmp);
+	return -1;
+}
+
+int rv515_gpu_reset(struct radeon_device *rdev)
+{
+	uint32_t status;
+
+	/* reset order likely matter */
+	status = RREG32(RADEON_RBBM_STATUS);
+	/* reset HDP */
+	r100_hdp_reset(rdev);
+	/* reset rb2d */
+	if (status & ((1 << 17) | (1 << 18) | (1 << 27))) {
+		r100_rb2d_reset(rdev);
+	}
+	/* reset GA */
+	if (status & ((1 << 20) | (1 << 26))) {
+		rv515_ga_reset(rdev);
+	}
+	/* reset CP */
+	status = RREG32(RADEON_RBBM_STATUS);
+	if (status & (1 << 16)) {
+		r100_cp_reset(rdev);
+	}
+	/* Check if GPU is idle */
+	status = RREG32(RADEON_RBBM_STATUS);
+	if (status & (1 << 31)) {
+		DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status);
+		return -1;
+	}
+	DRM_INFO("GPU reset succeed (RBBM_STATUS=0x%08X)\n", status);
+	return 0;
+}
+
+
+/*
+ * VRAM info
+ */
+static void rv515_vram_get_type(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	rdev->mc.vram_width = 128;
+	rdev->mc.vram_is_ddr = true;
+	tmp = RREG32_MC(RV515_MC_CNTL);
+	tmp &= RV515_MEM_NUM_CHANNELS_MASK;
+	switch (tmp) {
+	case 0:
+		rdev->mc.vram_width = 64;
+		break;
+	case 1:
+		rdev->mc.vram_width = 128;
+		break;
+	default:
+		rdev->mc.vram_width = 128;
+		break;
+	}
+}
+
+void rv515_vram_info(struct radeon_device *rdev)
+{
+	rv515_vram_get_type(rdev);
+	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+}
+
+
+/*
+ * Indirect registers accessor
+ */
+uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t r;
+
+	WREG32(R520_MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
+	r = RREG32(R520_MC_IND_DATA);
+	WREG32(R520_MC_IND_INDEX, 0);
+	return r;
+}
+
+void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG32(R520_MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
+	WREG32(R520_MC_IND_DATA, (v));
+	WREG32(R520_MC_IND_INDEX, 0);
+}
+
+uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+	uint32_t r;
+
+	WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
+	(void)RREG32(RADEON_PCIE_INDEX);
+	r = RREG32(RADEON_PCIE_DATA);
+	return r;
+}
+
+void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+	WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
+	(void)RREG32(RADEON_PCIE_INDEX);
+	WREG32(RADEON_PCIE_DATA, (v));
+	(void)RREG32(RADEON_PCIE_DATA);
+}
+
+
+/*
+ * Debugfs info
+ */
+#if defined(CONFIG_DEBUG_FS)
+static int rv515_debugfs_pipes_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = RREG32(R400_GB_PIPE_SELECT);
+	seq_printf(m, "GB_PIPE_SELECT 0x%08x\n", tmp);
+	tmp = RREG32(R500_SU_REG_DEST);
+	seq_printf(m, "SU_REG_DEST 0x%08x\n", tmp);
+	tmp = RREG32(R300_GB_TILE_CONFIG);
+	seq_printf(m, "GB_TILE_CONFIG 0x%08x\n", tmp);
+	tmp = RREG32(R300_DST_PIPE_CONFIG);
+	seq_printf(m, "DST_PIPE_CONFIG 0x%08x\n", tmp);
+	return 0;
+}
+
+static int rv515_debugfs_ga_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	uint32_t tmp;
+
+	tmp = RREG32(0x2140);
+	seq_printf(m, "VAP_CNTL_STATUS 0x%08x\n", tmp);
+	radeon_gpu_reset(rdev);
+	tmp = RREG32(0x425C);
+	seq_printf(m, "GA_IDLE 0x%08x\n", tmp);
+	return 0;
+}
+
+static struct drm_info_list rv515_pipes_info_list[] = {
+	{"rv515_pipes_info", rv515_debugfs_pipes_info, 0, NULL},
+};
+
+static struct drm_info_list rv515_ga_info_list[] = {
+	{"rv515_ga_info", rv515_debugfs_ga_info, 0, NULL},
+};
+#endif
+
+int rv515_debugfs_pipes_info_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, rv515_pipes_info_list, 1);
+#else
+	return 0;
+#endif
+}
+
+int rv515_debugfs_ga_info_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+	return radeon_debugfs_add_files(rdev, rv515_ga_info_list, 1);
+#else
+	return 0;
+#endif
+}
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
new file mode 100644
index 00000000000..da50cc51ede
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#include "drmP.h"
+#include "radeon_reg.h"
+#include "radeon.h"
+
+/* rv770,rv730,rv710  depends on : */
+void rs600_mc_disable_clients(struct radeon_device *rdev);
+
+/* This files gather functions specifics to:
+ * rv770,rv730,rv710
+ *
+ * Some of these functions might be used by newer ASICs.
+ */
+int rv770_mc_wait_for_idle(struct radeon_device *rdev);
+void rv770_gpu_init(struct radeon_device *rdev);
+
+
+/*
+ * MC
+ */
+int rv770_mc_init(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+
+	rv770_gpu_init(rdev);
+
+	/* setup the gart before changing location so we can ask to
+	 * discard unmapped mc request
+	 */
+	/* FIXME: disable out of gart access */
+	tmp = rdev->mc.gtt_location / 4096;
+	tmp = REG_SET(R700_LOGICAL_PAGE_NUMBER, tmp);
+	WREG32(R700_MC_VM_SYSTEM_APERTURE_LOW_ADDR, tmp);
+	tmp = (rdev->mc.gtt_location + rdev->mc.gtt_size) / 4096;
+	tmp = REG_SET(R700_LOGICAL_PAGE_NUMBER, tmp);
+	WREG32(R700_MC_VM_SYSTEM_APERTURE_HIGH_ADDR, tmp);
+
+	rs600_mc_disable_clients(rdev);
+	if (rv770_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen.\n");
+	}
+
+	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = REG_SET(R700_MC_FB_TOP, tmp >> 24);
+	tmp |= REG_SET(R700_MC_FB_BASE, rdev->mc.vram_location >> 24);
+	WREG32(R700_MC_VM_FB_LOCATION, tmp);
+	tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
+	tmp = REG_SET(R700_MC_AGP_TOP, tmp >> 22);
+	WREG32(R700_MC_VM_AGP_TOP, tmp);
+	tmp = REG_SET(R700_MC_AGP_BOT, rdev->mc.gtt_location >> 22);
+	WREG32(R700_MC_VM_AGP_BOT, tmp);
+	return 0;
+}
+
+void rv770_mc_fini(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+}
+
+
+/*
+ * Global GPU functions
+ */
+void rv770_errata(struct radeon_device *rdev)
+{
+	rdev->pll_errata = 0;
+}
+
+int rv770_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+	return 0;
+}
+
+void rv770_gpu_init(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+}
+
+
+/*
+ * VRAM info
+ */
+void rv770_vram_get_type(struct radeon_device *rdev)
+{
+	/* FIXME: implement */
+}
+
+void rv770_vram_info(struct radeon_device *rdev)
+{
+	rv770_vram_get_type(rdev);
+
+	/* FIXME: implement */
+	/* Could aper size report 0 ? */
+	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
+	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+}
diff --git a/drivers/gpu/drm/ttm/Makefile b/drivers/gpu/drm/ttm/Makefile
new file mode 100644
index 00000000000..b0a9de7a57c
--- /dev/null
+++ b/drivers/gpu/drm/ttm/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the drm device driver.  This driver provides support for the
+
+ccflags-y := -Iinclude/drm
+ttm-y := ttm_agp_backend.o ttm_memory.o ttm_tt.o ttm_bo.o \
+	ttm_bo_util.o ttm_bo_vm.o ttm_module.o ttm_global.o
+
+obj-$(CONFIG_DRM_TTM) += ttm.o
diff --git a/drivers/gpu/drm/ttm/ttm_agp_backend.c b/drivers/gpu/drm/ttm/ttm_agp_backend.c
new file mode 100644
index 00000000000..e8f6d2229d8
--- /dev/null
+++ b/drivers/gpu/drm/ttm/ttm_agp_backend.c
@@ -0,0 +1,150 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ *          Keith Packard.
+ */
+
+#include "ttm/ttm_module.h"
+#include "ttm/ttm_bo_driver.h"
+#ifdef TTM_HAS_AGP
+#include "ttm/ttm_placement.h"
+#include <linux/agp_backend.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <asm/agp.h>
+
+struct ttm_agp_backend {
+	struct ttm_backend backend;
+	struct agp_memory *mem;
+	struct agp_bridge_data *bridge;
+};
+
+static int ttm_agp_populate(struct ttm_backend *backend,
+			    unsigned long num_pages, struct page **pages,
+			    struct page *dummy_read_page)
+{
+	struct ttm_agp_backend *agp_be =
+	    container_of(backend, struct ttm_agp_backend, backend);
+	struct page **cur_page, **last_page = pages + num_pages;
+	struct agp_memory *mem;
+
+	mem = agp_allocate_memory(agp_be->bridge, num_pages, AGP_USER_MEMORY);
+	if (unlikely(mem == NULL))
+		return -ENOMEM;
+
+	mem->page_count = 0;
+	for (cur_page = pages; cur_page < last_page; ++cur_page) {
+		struct page *page = *cur_page;
+		if (!page)
+			page = dummy_read_page;
+
+		mem->memory[mem->page_count++] =
+		    phys_to_gart(page_to_phys(page));
+	}
+	agp_be->mem = mem;
+	return 0;
+}
+
+static int ttm_agp_bind(struct ttm_backend *backend, struct ttm_mem_reg *bo_mem)
+{
+	struct ttm_agp_backend *agp_be =
+	    container_of(backend, struct ttm_agp_backend, backend);
+	struct agp_memory *mem = agp_be->mem;
+	int cached = (bo_mem->placement & TTM_PL_FLAG_CACHED);
+	int ret;
+
+	mem->is_flushed = 1;
+	mem->type = (cached) ? AGP_USER_CACHED_MEMORY : AGP_USER_MEMORY;
+
+	ret = agp_bind_memory(mem, bo_mem->mm_node->start);
+	if (ret)
+		printk(KERN_ERR TTM_PFX "AGP Bind memory failed.\n");
+
+	return ret;
+}
+
+static int ttm_agp_unbind(struct ttm_backend *backend)
+{
+	struct ttm_agp_backend *agp_be =
+	    container_of(backend, struct ttm_agp_backend, backend);
+
+	if (agp_be->mem->is_bound)
+		return agp_unbind_memory(agp_be->mem);
+	else
+		return 0;
+}
+
+static void ttm_agp_clear(struct ttm_backend *backend)
+{
+	struct ttm_agp_backend *agp_be =
+	    container_of(backend, struct ttm_agp_backend, backend);
+	struct agp_memory *mem = agp_be->mem;
+
+	if (mem) {
+		ttm_agp_unbind(backend);
+		agp_free_memory(mem);
+	}
+	agp_be->mem = NULL;
+}
+
+static void ttm_agp_destroy(struct ttm_backend *backend)
+{
+	struct ttm_agp_backend *agp_be =
+	    container_of(backend, struct ttm_agp_backend, backend);
+
+	if (agp_be->mem)
+		ttm_agp_clear(backend);
+	kfree(agp_be);
+}
+
+static struct ttm_backend_func ttm_agp_func = {
+	.populate = ttm_agp_populate,
+	.clear = ttm_agp_clear,
+	.bind = ttm_agp_bind,
+	.unbind = ttm_agp_unbind,
+	.destroy = ttm_agp_destroy,
+};
+
+struct ttm_backend *ttm_agp_backend_init(struct ttm_bo_device *bdev,
+					 struct agp_bridge_data *bridge)
+{
+	struct ttm_agp_backend *agp_be;
+
+	agp_be = kmalloc(sizeof(*agp_be), GFP_KERNEL);
+	if (!agp_be)
+		return NULL;
+
+	agp_be->mem = NULL;
+	agp_be->bridge = bridge;
+	agp_be->backend.func = &ttm_agp_func;
+	agp_be->backend.bdev = bdev;
+	return &agp_be->backend;
+}
+EXPORT_SYMBOL(ttm_agp_backend_init);
+
+#endif
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
new file mode 100644
index 00000000000..1587aeca7be
--- /dev/null
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -0,0 +1,1698 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#include "ttm/ttm_module.h"
+#include "ttm/ttm_bo_driver.h"
+#include "ttm/ttm_placement.h"
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/file.h>
+#include <linux/module.h>
+
+#define TTM_ASSERT_LOCKED(param)
+#define TTM_DEBUG(fmt, arg...)
+#define TTM_BO_HASH_ORDER 13
+
+static int ttm_bo_setup_vm(struct ttm_buffer_object *bo);
+static void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
+static int ttm_bo_swapout(struct ttm_mem_shrink *shrink);
+
+static inline uint32_t ttm_bo_type_flags(unsigned type)
+{
+	return 1 << (type);
+}
+
+static void ttm_bo_release_list(struct kref *list_kref)
+{
+	struct ttm_buffer_object *bo =
+	    container_of(list_kref, struct ttm_buffer_object, list_kref);
+	struct ttm_bo_device *bdev = bo->bdev;
+
+	BUG_ON(atomic_read(&bo->list_kref.refcount));
+	BUG_ON(atomic_read(&bo->kref.refcount));
+	BUG_ON(atomic_read(&bo->cpu_writers));
+	BUG_ON(bo->sync_obj != NULL);
+	BUG_ON(bo->mem.mm_node != NULL);
+	BUG_ON(!list_empty(&bo->lru));
+	BUG_ON(!list_empty(&bo->ddestroy));
+
+	if (bo->ttm)
+		ttm_tt_destroy(bo->ttm);
+	if (bo->destroy)
+		bo->destroy(bo);
+	else {
+		ttm_mem_global_free(bdev->mem_glob, bo->acc_size, false);
+		kfree(bo);
+	}
+}
+
+int ttm_bo_wait_unreserved(struct ttm_buffer_object *bo, bool interruptible)
+{
+
+	if (interruptible) {
+		int ret = 0;
+
+		ret = wait_event_interruptible(bo->event_queue,
+					       atomic_read(&bo->reserved) == 0);
+		if (unlikely(ret != 0))
+			return -ERESTART;
+	} else {
+		wait_event(bo->event_queue, atomic_read(&bo->reserved) == 0);
+	}
+	return 0;
+}
+
+static void ttm_bo_add_to_lru(struct ttm_buffer_object *bo)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct ttm_mem_type_manager *man;
+
+	BUG_ON(!atomic_read(&bo->reserved));
+
+	if (!(bo->mem.placement & TTM_PL_FLAG_NO_EVICT)) {
+
+		BUG_ON(!list_empty(&bo->lru));
+
+		man = &bdev->man[bo->mem.mem_type];
+		list_add_tail(&bo->lru, &man->lru);
+		kref_get(&bo->list_kref);
+
+		if (bo->ttm != NULL) {
+			list_add_tail(&bo->swap, &bdev->swap_lru);
+			kref_get(&bo->list_kref);
+		}
+	}
+}
+
+/**
+ * Call with the lru_lock held.
+ */
+
+static int ttm_bo_del_from_lru(struct ttm_buffer_object *bo)
+{
+	int put_count = 0;
+
+	if (!list_empty(&bo->swap)) {
+		list_del_init(&bo->swap);
+		++put_count;
+	}
+	if (!list_empty(&bo->lru)) {
+		list_del_init(&bo->lru);
+		++put_count;
+	}
+
+	/*
+	 * TODO: Add a driver hook to delete from
+	 * driver-specific LRU's here.
+	 */
+
+	return put_count;
+}
+
+int ttm_bo_reserve_locked(struct ttm_buffer_object *bo,
+			  bool interruptible,
+			  bool no_wait, bool use_sequence, uint32_t sequence)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	int ret;
+
+	while (unlikely(atomic_cmpxchg(&bo->reserved, 0, 1) != 0)) {
+		if (use_sequence && bo->seq_valid &&
+			(sequence - bo->val_seq < (1 << 31))) {
+			return -EAGAIN;
+		}
+
+		if (no_wait)
+			return -EBUSY;
+
+		spin_unlock(&bdev->lru_lock);
+		ret = ttm_bo_wait_unreserved(bo, interruptible);
+		spin_lock(&bdev->lru_lock);
+
+		if (unlikely(ret))
+			return ret;
+	}
+
+	if (use_sequence) {
+		bo->val_seq = sequence;
+		bo->seq_valid = true;
+	} else {
+		bo->seq_valid = false;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(ttm_bo_reserve);
+
+static void ttm_bo_ref_bug(struct kref *list_kref)
+{
+	BUG();
+}
+
+int ttm_bo_reserve(struct ttm_buffer_object *bo,
+		   bool interruptible,
+		   bool no_wait, bool use_sequence, uint32_t sequence)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	int put_count = 0;
+	int ret;
+
+	spin_lock(&bdev->lru_lock);
+	ret = ttm_bo_reserve_locked(bo, interruptible, no_wait, use_sequence,
+				    sequence);
+	if (likely(ret == 0))
+		put_count = ttm_bo_del_from_lru(bo);
+	spin_unlock(&bdev->lru_lock);
+
+	while (put_count--)
+		kref_put(&bo->list_kref, ttm_bo_ref_bug);
+
+	return ret;
+}
+
+void ttm_bo_unreserve(struct ttm_buffer_object *bo)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+
+	spin_lock(&bdev->lru_lock);
+	ttm_bo_add_to_lru(bo);
+	atomic_set(&bo->reserved, 0);
+	wake_up_all(&bo->event_queue);
+	spin_unlock(&bdev->lru_lock);
+}
+EXPORT_SYMBOL(ttm_bo_unreserve);
+
+/*
+ * Call bo->mutex locked.
+ */
+
+static int ttm_bo_add_ttm(struct ttm_buffer_object *bo, bool zero_alloc)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	int ret = 0;
+	uint32_t page_flags = 0;
+
+	TTM_ASSERT_LOCKED(&bo->mutex);
+	bo->ttm = NULL;
+
+	switch (bo->type) {
+	case ttm_bo_type_device:
+		if (zero_alloc)
+			page_flags |= TTM_PAGE_FLAG_ZERO_ALLOC;
+	case ttm_bo_type_kernel:
+		bo->ttm = ttm_tt_create(bdev, bo->num_pages << PAGE_SHIFT,
+					page_flags, bdev->dummy_read_page);
+		if (unlikely(bo->ttm == NULL))
+			ret = -ENOMEM;
+		break;
+	case ttm_bo_type_user:
+		bo->ttm = ttm_tt_create(bdev, bo->num_pages << PAGE_SHIFT,
+					page_flags | TTM_PAGE_FLAG_USER,
+					bdev->dummy_read_page);
+		if (unlikely(bo->ttm == NULL))
+			ret = -ENOMEM;
+		break;
+
+		ret = ttm_tt_set_user(bo->ttm, current,
+				      bo->buffer_start, bo->num_pages);
+		if (unlikely(ret != 0))
+			ttm_tt_destroy(bo->ttm);
+		break;
+	default:
+		printk(KERN_ERR TTM_PFX "Illegal buffer object type\n");
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo,
+				  struct ttm_mem_reg *mem,
+				  bool evict, bool interruptible, bool no_wait)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	bool old_is_pci = ttm_mem_reg_is_pci(bdev, &bo->mem);
+	bool new_is_pci = ttm_mem_reg_is_pci(bdev, mem);
+	struct ttm_mem_type_manager *old_man = &bdev->man[bo->mem.mem_type];
+	struct ttm_mem_type_manager *new_man = &bdev->man[mem->mem_type];
+	int ret = 0;
+
+	if (old_is_pci || new_is_pci ||
+	    ((mem->placement & bo->mem.placement & TTM_PL_MASK_CACHING) == 0))
+		ttm_bo_unmap_virtual(bo);
+
+	/*
+	 * Create and bind a ttm if required.
+	 */
+
+	if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED) && (bo->ttm == NULL)) {
+		ret = ttm_bo_add_ttm(bo, false);
+		if (ret)
+			goto out_err;
+
+		ret = ttm_tt_set_placement_caching(bo->ttm, mem->placement);
+		if (ret)
+			return ret;
+
+		if (mem->mem_type != TTM_PL_SYSTEM) {
+			ret = ttm_tt_bind(bo->ttm, mem);
+			if (ret)
+				goto out_err;
+		}
+
+		if (bo->mem.mem_type == TTM_PL_SYSTEM) {
+
+			struct ttm_mem_reg *old_mem = &bo->mem;
+			uint32_t save_flags = old_mem->placement;
+
+			*old_mem = *mem;
+			mem->mm_node = NULL;
+			ttm_flag_masked(&save_flags, mem->placement,
+					TTM_PL_MASK_MEMTYPE);
+			goto moved;
+		}
+
+	}
+
+	if (!(old_man->flags & TTM_MEMTYPE_FLAG_FIXED) &&
+	    !(new_man->flags & TTM_MEMTYPE_FLAG_FIXED))
+		ret = ttm_bo_move_ttm(bo, evict, no_wait, mem);
+	else if (bdev->driver->move)
+		ret = bdev->driver->move(bo, evict, interruptible,
+					 no_wait, mem);
+	else
+		ret = ttm_bo_move_memcpy(bo, evict, no_wait, mem);
+
+	if (ret)
+		goto out_err;
+
+moved:
+	if (bo->evicted) {
+		ret = bdev->driver->invalidate_caches(bdev, bo->mem.placement);
+		if (ret)
+			printk(KERN_ERR TTM_PFX "Can not flush read caches\n");
+		bo->evicted = false;
+	}
+
+	if (bo->mem.mm_node) {
+		spin_lock(&bo->lock);
+		bo->offset = (bo->mem.mm_node->start << PAGE_SHIFT) +
+		    bdev->man[bo->mem.mem_type].gpu_offset;
+		bo->cur_placement = bo->mem.placement;
+		spin_unlock(&bo->lock);
+	}
+
+	return 0;
+
+out_err:
+	new_man = &bdev->man[bo->mem.mem_type];
+	if ((new_man->flags & TTM_MEMTYPE_FLAG_FIXED) && bo->ttm) {
+		ttm_tt_unbind(bo->ttm);
+		ttm_tt_destroy(bo->ttm);
+		bo->ttm = NULL;
+	}
+
+	return ret;
+}
+
+/**
+ * If bo idle, remove from delayed- and lru lists, and unref.
+ * If not idle, and already on delayed list, do nothing.
+ * If not idle, and not on delayed list, put on delayed list,
+ *   up the list_kref and schedule a delayed list check.
+ */
+
+static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct ttm_bo_driver *driver = bdev->driver;
+	int ret;
+
+	spin_lock(&bo->lock);
+	(void) ttm_bo_wait(bo, false, false, !remove_all);
+
+	if (!bo->sync_obj) {
+		int put_count;
+
+		spin_unlock(&bo->lock);
+
+		spin_lock(&bdev->lru_lock);
+		ret = ttm_bo_reserve_locked(bo, false, false, false, 0);
+		BUG_ON(ret);
+		if (bo->ttm)
+			ttm_tt_unbind(bo->ttm);
+
+		if (!list_empty(&bo->ddestroy)) {
+			list_del_init(&bo->ddestroy);
+			kref_put(&bo->list_kref, ttm_bo_ref_bug);
+		}
+		if (bo->mem.mm_node) {
+			drm_mm_put_block(bo->mem.mm_node);
+			bo->mem.mm_node = NULL;
+		}
+		put_count = ttm_bo_del_from_lru(bo);
+		spin_unlock(&bdev->lru_lock);
+
+		atomic_set(&bo->reserved, 0);
+
+		while (put_count--)
+			kref_put(&bo->list_kref, ttm_bo_release_list);
+
+		return 0;
+	}
+
+	spin_lock(&bdev->lru_lock);
+	if (list_empty(&bo->ddestroy)) {
+		void *sync_obj = bo->sync_obj;
+		void *sync_obj_arg = bo->sync_obj_arg;
+
+		kref_get(&bo->list_kref);
+		list_add_tail(&bo->ddestroy, &bdev->ddestroy);
+		spin_unlock(&bdev->lru_lock);
+		spin_unlock(&bo->lock);
+
+		if (sync_obj)
+			driver->sync_obj_flush(sync_obj, sync_obj_arg);
+		schedule_delayed_work(&bdev->wq,
+				      ((HZ / 100) < 1) ? 1 : HZ / 100);
+		ret = 0;
+
+	} else {
+		spin_unlock(&bdev->lru_lock);
+		spin_unlock(&bo->lock);
+		ret = -EBUSY;
+	}
+
+	return ret;
+}
+
+/**
+ * Traverse the delayed list, and call ttm_bo_cleanup_refs on all
+ * encountered buffers.
+ */
+
+static int ttm_bo_delayed_delete(struct ttm_bo_device *bdev, bool remove_all)
+{
+	struct ttm_buffer_object *entry, *nentry;
+	struct list_head *list, *next;
+	int ret;
+
+	spin_lock(&bdev->lru_lock);
+	list_for_each_safe(list, next, &bdev->ddestroy) {
+		entry = list_entry(list, struct ttm_buffer_object, ddestroy);
+		nentry = NULL;
+
+		/*
+		 * Protect the next list entry from destruction while we
+		 * unlock the lru_lock.
+		 */
+
+		if (next != &bdev->ddestroy) {
+			nentry = list_entry(next, struct ttm_buffer_object,
+					    ddestroy);
+			kref_get(&nentry->list_kref);
+		}
+		kref_get(&entry->list_kref);
+
+		spin_unlock(&bdev->lru_lock);
+		ret = ttm_bo_cleanup_refs(entry, remove_all);
+		kref_put(&entry->list_kref, ttm_bo_release_list);
+
+		spin_lock(&bdev->lru_lock);
+		if (nentry) {
+			bool next_onlist = !list_empty(next);
+			spin_unlock(&bdev->lru_lock);
+			kref_put(&nentry->list_kref, ttm_bo_release_list);
+			spin_lock(&bdev->lru_lock);
+			/*
+			 * Someone might have raced us and removed the
+			 * next entry from the list. We don't bother restarting
+			 * list traversal.
+			 */
+
+			if (!next_onlist)
+				break;
+		}
+		if (ret)
+			break;
+	}
+	ret = !list_empty(&bdev->ddestroy);
+	spin_unlock(&bdev->lru_lock);
+
+	return ret;
+}
+
+static void ttm_bo_delayed_workqueue(struct work_struct *work)
+{
+	struct ttm_bo_device *bdev =
+	    container_of(work, struct ttm_bo_device, wq.work);
+
+	if (ttm_bo_delayed_delete(bdev, false)) {
+		schedule_delayed_work(&bdev->wq,
+				      ((HZ / 100) < 1) ? 1 : HZ / 100);
+	}
+}
+
+static void ttm_bo_release(struct kref *kref)
+{
+	struct ttm_buffer_object *bo =
+	    container_of(kref, struct ttm_buffer_object, kref);
+	struct ttm_bo_device *bdev = bo->bdev;
+
+	if (likely(bo->vm_node != NULL)) {
+		rb_erase(&bo->vm_rb, &bdev->addr_space_rb);
+		drm_mm_put_block(bo->vm_node);
+		bo->vm_node = NULL;
+	}
+	write_unlock(&bdev->vm_lock);
+	ttm_bo_cleanup_refs(bo, false);
+	kref_put(&bo->list_kref, ttm_bo_release_list);
+	write_lock(&bdev->vm_lock);
+}
+
+void ttm_bo_unref(struct ttm_buffer_object **p_bo)
+{
+	struct ttm_buffer_object *bo = *p_bo;
+	struct ttm_bo_device *bdev = bo->bdev;
+
+	*p_bo = NULL;
+	write_lock(&bdev->vm_lock);
+	kref_put(&bo->kref, ttm_bo_release);
+	write_unlock(&bdev->vm_lock);
+}
+EXPORT_SYMBOL(ttm_bo_unref);
+
+static int ttm_bo_evict(struct ttm_buffer_object *bo, unsigned mem_type,
+			bool interruptible, bool no_wait)
+{
+	int ret = 0;
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct ttm_mem_reg evict_mem;
+	uint32_t proposed_placement;
+
+	if (bo->mem.mem_type != mem_type)
+		goto out;
+
+	spin_lock(&bo->lock);
+	ret = ttm_bo_wait(bo, false, interruptible, no_wait);
+	spin_unlock(&bo->lock);
+
+	if (ret && ret != -ERESTART) {
+		printk(KERN_ERR TTM_PFX "Failed to expire sync object before "
+		       "buffer eviction.\n");
+		goto out;
+	}
+
+	BUG_ON(!atomic_read(&bo->reserved));
+
+	evict_mem = bo->mem;
+	evict_mem.mm_node = NULL;
+
+	proposed_placement = bdev->driver->evict_flags(bo);
+
+	ret = ttm_bo_mem_space(bo, proposed_placement,
+			       &evict_mem, interruptible, no_wait);
+	if (unlikely(ret != 0 && ret != -ERESTART))
+		ret = ttm_bo_mem_space(bo, TTM_PL_FLAG_SYSTEM,
+				       &evict_mem, interruptible, no_wait);
+
+	if (ret) {
+		if (ret != -ERESTART)
+			printk(KERN_ERR TTM_PFX
+			       "Failed to find memory space for "
+			       "buffer 0x%p eviction.\n", bo);
+		goto out;
+	}
+
+	ret = ttm_bo_handle_move_mem(bo, &evict_mem, true, interruptible,
+				     no_wait);
+	if (ret) {
+		if (ret != -ERESTART)
+			printk(KERN_ERR TTM_PFX "Buffer eviction failed\n");
+		goto out;
+	}
+
+	spin_lock(&bdev->lru_lock);
+	if (evict_mem.mm_node) {
+		drm_mm_put_block(evict_mem.mm_node);
+		evict_mem.mm_node = NULL;
+	}
+	spin_unlock(&bdev->lru_lock);
+	bo->evicted = true;
+out:
+	return ret;
+}
+
+/**
+ * Repeatedly evict memory from the LRU for @mem_type until we create enough
+ * space, or we've evicted everything and there isn't enough space.
+ */
+static int ttm_bo_mem_force_space(struct ttm_bo_device *bdev,
+				  struct ttm_mem_reg *mem,
+				  uint32_t mem_type,
+				  bool interruptible, bool no_wait)
+{
+	struct drm_mm_node *node;
+	struct ttm_buffer_object *entry;
+	struct ttm_mem_type_manager *man = &bdev->man[mem_type];
+	struct list_head *lru;
+	unsigned long num_pages = mem->num_pages;
+	int put_count = 0;
+	int ret;
+
+retry_pre_get:
+	ret = drm_mm_pre_get(&man->manager);
+	if (unlikely(ret != 0))
+		return ret;
+
+	spin_lock(&bdev->lru_lock);
+	do {
+		node = drm_mm_search_free(&man->manager, num_pages,
+					  mem->page_alignment, 1);
+		if (node)
+			break;
+
+		lru = &man->lru;
+		if (list_empty(lru))
+			break;
+
+		entry = list_first_entry(lru, struct ttm_buffer_object, lru);
+		kref_get(&entry->list_kref);
+
+		ret =
+		    ttm_bo_reserve_locked(entry, interruptible, no_wait,
+					  false, 0);
+
+		if (likely(ret == 0))
+			put_count = ttm_bo_del_from_lru(entry);
+
+		spin_unlock(&bdev->lru_lock);
+
+		if (unlikely(ret != 0))
+			return ret;
+
+		while (put_count--)
+			kref_put(&entry->list_kref, ttm_bo_ref_bug);
+
+		ret = ttm_bo_evict(entry, mem_type, interruptible, no_wait);
+
+		ttm_bo_unreserve(entry);
+
+		kref_put(&entry->list_kref, ttm_bo_release_list);
+		if (ret)
+			return ret;
+
+		spin_lock(&bdev->lru_lock);
+	} while (1);
+
+	if (!node) {
+		spin_unlock(&bdev->lru_lock);
+		return -ENOMEM;
+	}
+
+	node = drm_mm_get_block_atomic(node, num_pages, mem->page_alignment);
+	if (unlikely(!node)) {
+		spin_unlock(&bdev->lru_lock);
+		goto retry_pre_get;
+	}
+
+	spin_unlock(&bdev->lru_lock);
+	mem->mm_node = node;
+	mem->mem_type = mem_type;
+	return 0;
+}
+
+static bool ttm_bo_mt_compatible(struct ttm_mem_type_manager *man,
+				 bool disallow_fixed,
+				 uint32_t mem_type,
+				 uint32_t mask, uint32_t *res_mask)
+{
+	uint32_t cur_flags = ttm_bo_type_flags(mem_type);
+
+	if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && disallow_fixed)
+		return false;
+
+	if ((cur_flags & mask & TTM_PL_MASK_MEM) == 0)
+		return false;
+
+	if ((mask & man->available_caching) == 0)
+		return false;
+	if (mask & man->default_caching)
+		cur_flags |= man->default_caching;
+	else if (mask & TTM_PL_FLAG_CACHED)
+		cur_flags |= TTM_PL_FLAG_CACHED;
+	else if (mask & TTM_PL_FLAG_WC)
+		cur_flags |= TTM_PL_FLAG_WC;
+	else
+		cur_flags |= TTM_PL_FLAG_UNCACHED;
+
+	*res_mask = cur_flags;
+	return true;
+}
+
+/**
+ * Creates space for memory region @mem according to its type.
+ *
+ * This function first searches for free space in compatible memory types in
+ * the priority order defined by the driver.  If free space isn't found, then
+ * ttm_bo_mem_force_space is attempted in priority order to evict and find
+ * space.
+ */
+int ttm_bo_mem_space(struct ttm_buffer_object *bo,
+		     uint32_t proposed_placement,
+		     struct ttm_mem_reg *mem,
+		     bool interruptible, bool no_wait)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct ttm_mem_type_manager *man;
+
+	uint32_t num_prios = bdev->driver->num_mem_type_prio;
+	const uint32_t *prios = bdev->driver->mem_type_prio;
+	uint32_t i;
+	uint32_t mem_type = TTM_PL_SYSTEM;
+	uint32_t cur_flags = 0;
+	bool type_found = false;
+	bool type_ok = false;
+	bool has_eagain = false;
+	struct drm_mm_node *node = NULL;
+	int ret;
+
+	mem->mm_node = NULL;
+	for (i = 0; i < num_prios; ++i) {
+		mem_type = prios[i];
+		man = &bdev->man[mem_type];
+
+		type_ok = ttm_bo_mt_compatible(man,
+					       bo->type == ttm_bo_type_user,
+					       mem_type, proposed_placement,
+					       &cur_flags);
+
+		if (!type_ok)
+			continue;
+
+		if (mem_type == TTM_PL_SYSTEM)
+			break;
+
+		if (man->has_type && man->use_type) {
+			type_found = true;
+			do {
+				ret = drm_mm_pre_get(&man->manager);
+				if (unlikely(ret))
+					return ret;
+
+				spin_lock(&bdev->lru_lock);
+				node = drm_mm_search_free(&man->manager,
+							  mem->num_pages,
+							  mem->page_alignment,
+							  1);
+				if (unlikely(!node)) {
+					spin_unlock(&bdev->lru_lock);
+					break;
+				}
+				node = drm_mm_get_block_atomic(node,
+							       mem->num_pages,
+							       mem->
+							       page_alignment);
+				spin_unlock(&bdev->lru_lock);
+			} while (!node);
+		}
+		if (node)
+			break;
+	}
+
+	if ((type_ok && (mem_type == TTM_PL_SYSTEM)) || node) {
+		mem->mm_node = node;
+		mem->mem_type = mem_type;
+		mem->placement = cur_flags;
+		return 0;
+	}
+
+	if (!type_found)
+		return -EINVAL;
+
+	num_prios = bdev->driver->num_mem_busy_prio;
+	prios = bdev->driver->mem_busy_prio;
+
+	for (i = 0; i < num_prios; ++i) {
+		mem_type = prios[i];
+		man = &bdev->man[mem_type];
+
+		if (!man->has_type)
+			continue;
+
+		if (!ttm_bo_mt_compatible(man,
+					  bo->type == ttm_bo_type_user,
+					  mem_type,
+					  proposed_placement, &cur_flags))
+			continue;
+
+		ret = ttm_bo_mem_force_space(bdev, mem, mem_type,
+					     interruptible, no_wait);
+
+		if (ret == 0 && mem->mm_node) {
+			mem->placement = cur_flags;
+			return 0;
+		}
+
+		if (ret == -ERESTART)
+			has_eagain = true;
+	}
+
+	ret = (has_eagain) ? -ERESTART : -ENOMEM;
+	return ret;
+}
+EXPORT_SYMBOL(ttm_bo_mem_space);
+
+int ttm_bo_wait_cpu(struct ttm_buffer_object *bo, bool no_wait)
+{
+	int ret = 0;
+
+	if ((atomic_read(&bo->cpu_writers) > 0) && no_wait)
+		return -EBUSY;
+
+	ret = wait_event_interruptible(bo->event_queue,
+				       atomic_read(&bo->cpu_writers) == 0);
+
+	if (ret == -ERESTARTSYS)
+		ret = -ERESTART;
+
+	return ret;
+}
+
+int ttm_bo_move_buffer(struct ttm_buffer_object *bo,
+		       uint32_t proposed_placement,
+		       bool interruptible, bool no_wait)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	int ret = 0;
+	struct ttm_mem_reg mem;
+
+	BUG_ON(!atomic_read(&bo->reserved));
+
+	/*
+	 * FIXME: It's possible to pipeline buffer moves.
+	 * Have the driver move function wait for idle when necessary,
+	 * instead of doing it here.
+	 */
+
+	spin_lock(&bo->lock);
+	ret = ttm_bo_wait(bo, false, interruptible, no_wait);
+	spin_unlock(&bo->lock);
+
+	if (ret)
+		return ret;
+
+	mem.num_pages = bo->num_pages;
+	mem.size = mem.num_pages << PAGE_SHIFT;
+	mem.page_alignment = bo->mem.page_alignment;
+
+	/*
+	 * Determine where to move the buffer.
+	 */
+
+	ret = ttm_bo_mem_space(bo, proposed_placement, &mem,
+			       interruptible, no_wait);
+	if (ret)
+		goto out_unlock;
+
+	ret = ttm_bo_handle_move_mem(bo, &mem, false, interruptible, no_wait);
+
+out_unlock:
+	if (ret && mem.mm_node) {
+		spin_lock(&bdev->lru_lock);
+		drm_mm_put_block(mem.mm_node);
+		spin_unlock(&bdev->lru_lock);
+	}
+	return ret;
+}
+
+static int ttm_bo_mem_compat(uint32_t proposed_placement,
+			     struct ttm_mem_reg *mem)
+{
+	if ((proposed_placement & mem->placement & TTM_PL_MASK_MEM) == 0)
+		return 0;
+	if ((proposed_placement & mem->placement & TTM_PL_MASK_CACHING) == 0)
+		return 0;
+
+	return 1;
+}
+
+int ttm_buffer_object_validate(struct ttm_buffer_object *bo,
+			       uint32_t proposed_placement,
+			       bool interruptible, bool no_wait)
+{
+	int ret;
+
+	BUG_ON(!atomic_read(&bo->reserved));
+	bo->proposed_placement = proposed_placement;
+
+	TTM_DEBUG("Proposed placement 0x%08lx, Old flags 0x%08lx\n",
+		  (unsigned long)proposed_placement,
+		  (unsigned long)bo->mem.placement);
+
+	/*
+	 * Check whether we need to move buffer.
+	 */
+
+	if (!ttm_bo_mem_compat(bo->proposed_placement, &bo->mem)) {
+		ret = ttm_bo_move_buffer(bo, bo->proposed_placement,
+					 interruptible, no_wait);
+		if (ret) {
+			if (ret != -ERESTART)
+				printk(KERN_ERR TTM_PFX
+				       "Failed moving buffer. "
+				       "Proposed placement 0x%08x\n",
+				       bo->proposed_placement);
+			if (ret == -ENOMEM)
+				printk(KERN_ERR TTM_PFX
+				       "Out of aperture space or "
+				       "DRM memory quota.\n");
+			return ret;
+		}
+	}
+
+	/*
+	 * We might need to add a TTM.
+	 */
+
+	if (bo->mem.mem_type == TTM_PL_SYSTEM && bo->ttm == NULL) {
+		ret = ttm_bo_add_ttm(bo, true);
+		if (ret)
+			return ret;
+	}
+	/*
+	 * Validation has succeeded, move the access and other
+	 * non-mapping-related flag bits from the proposed flags to
+	 * the active flags
+	 */
+
+	ttm_flag_masked(&bo->mem.placement, bo->proposed_placement,
+			~TTM_PL_MASK_MEMTYPE);
+
+	return 0;
+}
+EXPORT_SYMBOL(ttm_buffer_object_validate);
+
+int
+ttm_bo_check_placement(struct ttm_buffer_object *bo,
+		       uint32_t set_flags, uint32_t clr_flags)
+{
+	uint32_t new_mask = set_flags | clr_flags;
+
+	if ((bo->type == ttm_bo_type_user) &&
+	    (clr_flags & TTM_PL_FLAG_CACHED)) {
+		printk(KERN_ERR TTM_PFX
+		       "User buffers require cache-coherent memory.\n");
+		return -EINVAL;
+	}
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if (new_mask & TTM_PL_FLAG_NO_EVICT) {
+			printk(KERN_ERR TTM_PFX "Need to be root to modify"
+			       " NO_EVICT status.\n");
+			return -EINVAL;
+		}
+
+		if ((clr_flags & bo->mem.placement & TTM_PL_MASK_MEMTYPE) &&
+		    (bo->mem.placement & TTM_PL_FLAG_NO_EVICT)) {
+			printk(KERN_ERR TTM_PFX
+			       "Incompatible memory specification"
+			       " for NO_EVICT buffer.\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+int ttm_buffer_object_init(struct ttm_bo_device *bdev,
+			   struct ttm_buffer_object *bo,
+			   unsigned long size,
+			   enum ttm_bo_type type,
+			   uint32_t flags,
+			   uint32_t page_alignment,
+			   unsigned long buffer_start,
+			   bool interruptible,
+			   struct file *persistant_swap_storage,
+			   size_t acc_size,
+			   void (*destroy) (struct ttm_buffer_object *))
+{
+	int ret = 0;
+	unsigned long num_pages;
+
+	size += buffer_start & ~PAGE_MASK;
+	num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	if (num_pages == 0) {
+		printk(KERN_ERR TTM_PFX "Illegal buffer object size.\n");
+		return -EINVAL;
+	}
+	bo->destroy = destroy;
+
+	spin_lock_init(&bo->lock);
+	kref_init(&bo->kref);
+	kref_init(&bo->list_kref);
+	atomic_set(&bo->cpu_writers, 0);
+	atomic_set(&bo->reserved, 1);
+	init_waitqueue_head(&bo->event_queue);
+	INIT_LIST_HEAD(&bo->lru);
+	INIT_LIST_HEAD(&bo->ddestroy);
+	INIT_LIST_HEAD(&bo->swap);
+	bo->bdev = bdev;
+	bo->type = type;
+	bo->num_pages = num_pages;
+	bo->mem.mem_type = TTM_PL_SYSTEM;
+	bo->mem.num_pages = bo->num_pages;
+	bo->mem.mm_node = NULL;
+	bo->mem.page_alignment = page_alignment;
+	bo->buffer_start = buffer_start & PAGE_MASK;
+	bo->priv_flags = 0;
+	bo->mem.placement = (TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED);
+	bo->seq_valid = false;
+	bo->persistant_swap_storage = persistant_swap_storage;
+	bo->acc_size = acc_size;
+
+	ret = ttm_bo_check_placement(bo, flags, 0ULL);
+	if (unlikely(ret != 0))
+		goto out_err;
+
+	/*
+	 * If no caching attributes are set, accept any form of caching.
+	 */
+
+	if ((flags & TTM_PL_MASK_CACHING) == 0)
+		flags |= TTM_PL_MASK_CACHING;
+
+	/*
+	 * For ttm_bo_type_device buffers, allocate
+	 * address space from the device.
+	 */
+
+	if (bo->type == ttm_bo_type_device) {
+		ret = ttm_bo_setup_vm(bo);
+		if (ret)
+			goto out_err;
+	}
+
+	ret = ttm_buffer_object_validate(bo, flags, interruptible, false);
+	if (ret)
+		goto out_err;
+
+	ttm_bo_unreserve(bo);
+	return 0;
+
+out_err:
+	ttm_bo_unreserve(bo);
+	ttm_bo_unref(&bo);
+
+	return ret;
+}
+EXPORT_SYMBOL(ttm_buffer_object_init);
+
+static inline size_t ttm_bo_size(struct ttm_bo_device *bdev,
+				 unsigned long num_pages)
+{
+	size_t page_array_size = (num_pages * sizeof(void *) + PAGE_SIZE - 1) &
+	    PAGE_MASK;
+
+	return bdev->ttm_bo_size + 2 * page_array_size;
+}
+
+int ttm_buffer_object_create(struct ttm_bo_device *bdev,
+			     unsigned long size,
+			     enum ttm_bo_type type,
+			     uint32_t flags,
+			     uint32_t page_alignment,
+			     unsigned long buffer_start,
+			     bool interruptible,
+			     struct file *persistant_swap_storage,
+			     struct ttm_buffer_object **p_bo)
+{
+	struct ttm_buffer_object *bo;
+	int ret;
+	struct ttm_mem_global *mem_glob = bdev->mem_glob;
+
+	size_t acc_size =
+	    ttm_bo_size(bdev, (size + PAGE_SIZE - 1) >> PAGE_SHIFT);
+	ret = ttm_mem_global_alloc(mem_glob, acc_size, false, false, false);
+	if (unlikely(ret != 0))
+		return ret;
+
+	bo = kzalloc(sizeof(*bo), GFP_KERNEL);
+
+	if (unlikely(bo == NULL)) {
+		ttm_mem_global_free(mem_glob, acc_size, false);
+		return -ENOMEM;
+	}
+
+	ret = ttm_buffer_object_init(bdev, bo, size, type, flags,
+				     page_alignment, buffer_start,
+				     interruptible,
+				     persistant_swap_storage, acc_size, NULL);
+	if (likely(ret == 0))
+		*p_bo = bo;
+
+	return ret;
+}
+
+static int ttm_bo_leave_list(struct ttm_buffer_object *bo,
+			     uint32_t mem_type, bool allow_errors)
+{
+	int ret;
+
+	spin_lock(&bo->lock);
+	ret = ttm_bo_wait(bo, false, false, false);
+	spin_unlock(&bo->lock);
+
+	if (ret && allow_errors)
+		goto out;
+
+	if (bo->mem.mem_type == mem_type)
+		ret = ttm_bo_evict(bo, mem_type, false, false);
+
+	if (ret) {
+		if (allow_errors) {
+			goto out;
+		} else {
+			ret = 0;
+			printk(KERN_ERR TTM_PFX "Cleanup eviction failed\n");
+		}
+	}
+
+out:
+	return ret;
+}
+
+static int ttm_bo_force_list_clean(struct ttm_bo_device *bdev,
+				   struct list_head *head,
+				   unsigned mem_type, bool allow_errors)
+{
+	struct ttm_buffer_object *entry;
+	int ret;
+	int put_count;
+
+	/*
+	 * Can't use standard list traversal since we're unlocking.
+	 */
+
+	spin_lock(&bdev->lru_lock);
+
+	while (!list_empty(head)) {
+		entry = list_first_entry(head, struct ttm_buffer_object, lru);
+		kref_get(&entry->list_kref);
+		ret = ttm_bo_reserve_locked(entry, false, false, false, 0);
+		put_count = ttm_bo_del_from_lru(entry);
+		spin_unlock(&bdev->lru_lock);
+		while (put_count--)
+			kref_put(&entry->list_kref, ttm_bo_ref_bug);
+		BUG_ON(ret);
+		ret = ttm_bo_leave_list(entry, mem_type, allow_errors);
+		ttm_bo_unreserve(entry);
+		kref_put(&entry->list_kref, ttm_bo_release_list);
+		spin_lock(&bdev->lru_lock);
+	}
+
+	spin_unlock(&bdev->lru_lock);
+
+	return 0;
+}
+
+int ttm_bo_clean_mm(struct ttm_bo_device *bdev, unsigned mem_type)
+{
+	struct ttm_mem_type_manager *man = &bdev->man[mem_type];
+	int ret = -EINVAL;
+
+	if (mem_type >= TTM_NUM_MEM_TYPES) {
+		printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", mem_type);
+		return ret;
+	}
+
+	if (!man->has_type) {
+		printk(KERN_ERR TTM_PFX "Trying to take down uninitialized "
+		       "memory manager type %u\n", mem_type);
+		return ret;
+	}
+
+	man->use_type = false;
+	man->has_type = false;
+
+	ret = 0;
+	if (mem_type > 0) {
+		ttm_bo_force_list_clean(bdev, &man->lru, mem_type, false);
+
+		spin_lock(&bdev->lru_lock);
+		if (drm_mm_clean(&man->manager))
+			drm_mm_takedown(&man->manager);
+		else
+			ret = -EBUSY;
+
+		spin_unlock(&bdev->lru_lock);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(ttm_bo_clean_mm);
+
+int ttm_bo_evict_mm(struct ttm_bo_device *bdev, unsigned mem_type)
+{
+	struct ttm_mem_type_manager *man = &bdev->man[mem_type];
+
+	if (mem_type == 0 || mem_type >= TTM_NUM_MEM_TYPES) {
+		printk(KERN_ERR TTM_PFX
+		       "Illegal memory manager memory type %u.\n",
+		       mem_type);
+		return -EINVAL;
+	}
+
+	if (!man->has_type) {
+		printk(KERN_ERR TTM_PFX
+		       "Memory type %u has not been initialized.\n",
+		       mem_type);
+		return 0;
+	}
+
+	return ttm_bo_force_list_clean(bdev, &man->lru, mem_type, true);
+}
+EXPORT_SYMBOL(ttm_bo_evict_mm);
+
+int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type,
+		   unsigned long p_offset, unsigned long p_size)
+{
+	int ret = -EINVAL;
+	struct ttm_mem_type_manager *man;
+
+	if (type >= TTM_NUM_MEM_TYPES) {
+		printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", type);
+		return ret;
+	}
+
+	man = &bdev->man[type];
+	if (man->has_type) {
+		printk(KERN_ERR TTM_PFX
+		       "Memory manager already initialized for type %d\n",
+		       type);
+		return ret;
+	}
+
+	ret = bdev->driver->init_mem_type(bdev, type, man);
+	if (ret)
+		return ret;
+
+	ret = 0;
+	if (type != TTM_PL_SYSTEM) {
+		if (!p_size) {
+			printk(KERN_ERR TTM_PFX
+			       "Zero size memory manager type %d\n",
+			       type);
+			return ret;
+		}
+		ret = drm_mm_init(&man->manager, p_offset, p_size);
+		if (ret)
+			return ret;
+	}
+	man->has_type = true;
+	man->use_type = true;
+	man->size = p_size;
+
+	INIT_LIST_HEAD(&man->lru);
+
+	return 0;
+}
+EXPORT_SYMBOL(ttm_bo_init_mm);
+
+int ttm_bo_device_release(struct ttm_bo_device *bdev)
+{
+	int ret = 0;
+	unsigned i = TTM_NUM_MEM_TYPES;
+	struct ttm_mem_type_manager *man;
+
+	while (i--) {
+		man = &bdev->man[i];
+		if (man->has_type) {
+			man->use_type = false;
+			if ((i != TTM_PL_SYSTEM) && ttm_bo_clean_mm(bdev, i)) {
+				ret = -EBUSY;
+				printk(KERN_ERR TTM_PFX
+				       "DRM memory manager type %d "
+				       "is not clean.\n", i);
+			}
+			man->has_type = false;
+		}
+	}
+
+	if (!cancel_delayed_work(&bdev->wq))
+		flush_scheduled_work();
+
+	while (ttm_bo_delayed_delete(bdev, true))
+		;
+
+	spin_lock(&bdev->lru_lock);
+	if (list_empty(&bdev->ddestroy))
+		TTM_DEBUG("Delayed destroy list was clean\n");
+
+	if (list_empty(&bdev->man[0].lru))
+		TTM_DEBUG("Swap list was clean\n");
+	spin_unlock(&bdev->lru_lock);
+
+	ttm_mem_unregister_shrink(bdev->mem_glob, &bdev->shrink);
+	BUG_ON(!drm_mm_clean(&bdev->addr_space_mm));
+	write_lock(&bdev->vm_lock);
+	drm_mm_takedown(&bdev->addr_space_mm);
+	write_unlock(&bdev->vm_lock);
+
+	__free_page(bdev->dummy_read_page);
+	return ret;
+}
+EXPORT_SYMBOL(ttm_bo_device_release);
+
+/*
+ * This function is intended to be called on drm driver load.
+ * If you decide to call it from firstopen, you must protect the call
+ * from a potentially racing ttm_bo_driver_finish in lastclose.
+ * (This may happen on X server restart).
+ */
+
+int ttm_bo_device_init(struct ttm_bo_device *bdev,
+		       struct ttm_mem_global *mem_glob,
+		       struct ttm_bo_driver *driver, uint64_t file_page_offset)
+{
+	int ret = -EINVAL;
+
+	bdev->dummy_read_page = NULL;
+	rwlock_init(&bdev->vm_lock);
+	spin_lock_init(&bdev->lru_lock);
+
+	bdev->driver = driver;
+	bdev->mem_glob = mem_glob;
+
+	memset(bdev->man, 0, sizeof(bdev->man));
+
+	bdev->dummy_read_page = alloc_page(__GFP_ZERO | GFP_DMA32);
+	if (unlikely(bdev->dummy_read_page == NULL)) {
+		ret = -ENOMEM;
+		goto out_err0;
+	}
+
+	/*
+	 * Initialize the system memory buffer type.
+	 * Other types need to be driver / IOCTL initialized.
+	 */
+	ret = ttm_bo_init_mm(bdev, TTM_PL_SYSTEM, 0, 0);
+	if (unlikely(ret != 0))
+		goto out_err1;
+
+	bdev->addr_space_rb = RB_ROOT;
+	ret = drm_mm_init(&bdev->addr_space_mm, file_page_offset, 0x10000000);
+	if (unlikely(ret != 0))
+		goto out_err2;
+
+	INIT_DELAYED_WORK(&bdev->wq, ttm_bo_delayed_workqueue);
+	bdev->nice_mode = true;
+	INIT_LIST_HEAD(&bdev->ddestroy);
+	INIT_LIST_HEAD(&bdev->swap_lru);
+	bdev->dev_mapping = NULL;
+	ttm_mem_init_shrink(&bdev->shrink, ttm_bo_swapout);
+	ret = ttm_mem_register_shrink(mem_glob, &bdev->shrink);
+	if (unlikely(ret != 0)) {
+		printk(KERN_ERR TTM_PFX
+		       "Could not register buffer object swapout.\n");
+		goto out_err2;
+	}
+
+	bdev->ttm_bo_extra_size =
+		ttm_round_pot(sizeof(struct ttm_tt)) +
+		ttm_round_pot(sizeof(struct ttm_backend));
+
+	bdev->ttm_bo_size = bdev->ttm_bo_extra_size +
+		ttm_round_pot(sizeof(struct ttm_buffer_object));
+
+	return 0;
+out_err2:
+	ttm_bo_clean_mm(bdev, 0);
+out_err1:
+	__free_page(bdev->dummy_read_page);
+out_err0:
+	return ret;
+}
+EXPORT_SYMBOL(ttm_bo_device_init);
+
+/*
+ * buffer object vm functions.
+ */
+
+bool ttm_mem_reg_is_pci(struct ttm_bo_device *bdev, struct ttm_mem_reg *mem)
+{
+	struct ttm_mem_type_manager *man = &bdev->man[mem->mem_type];
+
+	if (!(man->flags & TTM_MEMTYPE_FLAG_FIXED)) {
+		if (mem->mem_type == TTM_PL_SYSTEM)
+			return false;
+
+		if (man->flags & TTM_MEMTYPE_FLAG_CMA)
+			return false;
+
+		if (mem->placement & TTM_PL_FLAG_CACHED)
+			return false;
+	}
+	return true;
+}
+
+int ttm_bo_pci_offset(struct ttm_bo_device *bdev,
+		      struct ttm_mem_reg *mem,
+		      unsigned long *bus_base,
+		      unsigned long *bus_offset, unsigned long *bus_size)
+{
+	struct ttm_mem_type_manager *man = &bdev->man[mem->mem_type];
+
+	*bus_size = 0;
+	if (!(man->flags & TTM_MEMTYPE_FLAG_MAPPABLE))
+		return -EINVAL;
+
+	if (ttm_mem_reg_is_pci(bdev, mem)) {
+		*bus_offset = mem->mm_node->start << PAGE_SHIFT;
+		*bus_size = mem->num_pages << PAGE_SHIFT;
+		*bus_base = man->io_offset;
+	}
+
+	return 0;
+}
+
+void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	loff_t offset = (loff_t) bo->addr_space_offset;
+	loff_t holelen = ((loff_t) bo->mem.num_pages) << PAGE_SHIFT;
+
+	if (!bdev->dev_mapping)
+		return;
+
+	unmap_mapping_range(bdev->dev_mapping, offset, holelen, 1);
+}
+
+static void ttm_bo_vm_insert_rb(struct ttm_buffer_object *bo)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct rb_node **cur = &bdev->addr_space_rb.rb_node;
+	struct rb_node *parent = NULL;
+	struct ttm_buffer_object *cur_bo;
+	unsigned long offset = bo->vm_node->start;
+	unsigned long cur_offset;
+
+	while (*cur) {
+		parent = *cur;
+		cur_bo = rb_entry(parent, struct ttm_buffer_object, vm_rb);
+		cur_offset = cur_bo->vm_node->start;
+		if (offset < cur_offset)
+			cur = &parent->rb_left;
+		else if (offset > cur_offset)
+			cur = &parent->rb_right;
+		else
+			BUG();
+	}
+
+	rb_link_node(&bo->vm_rb, parent, cur);
+	rb_insert_color(&bo->vm_rb, &bdev->addr_space_rb);
+}
+
+/**
+ * ttm_bo_setup_vm:
+ *
+ * @bo: the buffer to allocate address space for
+ *
+ * Allocate address space in the drm device so that applications
+ * can mmap the buffer and access the contents. This only
+ * applies to ttm_bo_type_device objects as others are not
+ * placed in the drm device address space.
+ */
+
+static int ttm_bo_setup_vm(struct ttm_buffer_object *bo)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	int ret;
+
+retry_pre_get:
+	ret = drm_mm_pre_get(&bdev->addr_space_mm);
+	if (unlikely(ret != 0))
+		return ret;
+
+	write_lock(&bdev->vm_lock);
+	bo->vm_node = drm_mm_search_free(&bdev->addr_space_mm,
+					 bo->mem.num_pages, 0, 0);
+
+	if (unlikely(bo->vm_node == NULL)) {
+		ret = -ENOMEM;
+		goto out_unlock;
+	}
+
+	bo->vm_node = drm_mm_get_block_atomic(bo->vm_node,
+					      bo->mem.num_pages, 0);
+
+	if (unlikely(bo->vm_node == NULL)) {
+		write_unlock(&bdev->vm_lock);
+		goto retry_pre_get;
+	}
+
+	ttm_bo_vm_insert_rb(bo);
+	write_unlock(&bdev->vm_lock);
+	bo->addr_space_offset = ((uint64_t) bo->vm_node->start) << PAGE_SHIFT;
+
+	return 0;
+out_unlock:
+	write_unlock(&bdev->vm_lock);
+	return ret;
+}
+
+int ttm_bo_wait(struct ttm_buffer_object *bo,
+		bool lazy, bool interruptible, bool no_wait)
+{
+	struct ttm_bo_driver *driver = bo->bdev->driver;
+	void *sync_obj;
+	void *sync_obj_arg;
+	int ret = 0;
+
+	if (likely(bo->sync_obj == NULL))
+		return 0;
+
+	while (bo->sync_obj) {
+
+		if (driver->sync_obj_signaled(bo->sync_obj, bo->sync_obj_arg)) {
+			void *tmp_obj = bo->sync_obj;
+			bo->sync_obj = NULL;
+			clear_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags);
+			spin_unlock(&bo->lock);
+			driver->sync_obj_unref(&tmp_obj);
+			spin_lock(&bo->lock);
+			continue;
+		}
+
+		if (no_wait)
+			return -EBUSY;
+
+		sync_obj = driver->sync_obj_ref(bo->sync_obj);
+		sync_obj_arg = bo->sync_obj_arg;
+		spin_unlock(&bo->lock);
+		ret = driver->sync_obj_wait(sync_obj, sync_obj_arg,
+					    lazy, interruptible);
+		if (unlikely(ret != 0)) {
+			driver->sync_obj_unref(&sync_obj);
+			spin_lock(&bo->lock);
+			return ret;
+		}
+		spin_lock(&bo->lock);
+		if (likely(bo->sync_obj == sync_obj &&
+			   bo->sync_obj_arg == sync_obj_arg)) {
+			void *tmp_obj = bo->sync_obj;
+			bo->sync_obj = NULL;
+			clear_bit(TTM_BO_PRIV_FLAG_MOVING,
+				  &bo->priv_flags);
+			spin_unlock(&bo->lock);
+			driver->sync_obj_unref(&sync_obj);
+			driver->sync_obj_unref(&tmp_obj);
+			spin_lock(&bo->lock);
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL(ttm_bo_wait);
+
+void ttm_bo_unblock_reservation(struct ttm_buffer_object *bo)
+{
+	atomic_set(&bo->reserved, 0);
+	wake_up_all(&bo->event_queue);
+}
+
+int ttm_bo_block_reservation(struct ttm_buffer_object *bo, bool interruptible,
+			     bool no_wait)
+{
+	int ret;
+
+	while (unlikely(atomic_cmpxchg(&bo->reserved, 0, 1) != 0)) {
+		if (no_wait)
+			return -EBUSY;
+		else if (interruptible) {
+			ret = wait_event_interruptible
+			    (bo->event_queue, atomic_read(&bo->reserved) == 0);
+			if (unlikely(ret != 0))
+				return -ERESTART;
+		} else {
+			wait_event(bo->event_queue,
+				   atomic_read(&bo->reserved) == 0);
+		}
+	}
+	return 0;
+}
+
+int ttm_bo_synccpu_write_grab(struct ttm_buffer_object *bo, bool no_wait)
+{
+	int ret = 0;
+
+	/*
+	 * Using ttm_bo_reserve instead of ttm_bo_block_reservation
+	 * makes sure the lru lists are updated.
+	 */
+
+	ret = ttm_bo_reserve(bo, true, no_wait, false, 0);
+	if (unlikely(ret != 0))
+		return ret;
+	spin_lock(&bo->lock);
+	ret = ttm_bo_wait(bo, false, true, no_wait);
+	spin_unlock(&bo->lock);
+	if (likely(ret == 0))
+		atomic_inc(&bo->cpu_writers);
+	ttm_bo_unreserve(bo);
+	return ret;
+}
+
+void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo)
+{
+	if (atomic_dec_and_test(&bo->cpu_writers))
+		wake_up_all(&bo->event_queue);
+}
+
+/**
+ * A buffer object shrink method that tries to swap out the first
+ * buffer object on the bo_global::swap_lru list.
+ */
+
+static int ttm_bo_swapout(struct ttm_mem_shrink *shrink)
+{
+	struct ttm_bo_device *bdev =
+	    container_of(shrink, struct ttm_bo_device, shrink);
+	struct ttm_buffer_object *bo;
+	int ret = -EBUSY;
+	int put_count;
+	uint32_t swap_placement = (TTM_PL_FLAG_CACHED | TTM_PL_FLAG_SYSTEM);
+
+	spin_lock(&bdev->lru_lock);
+	while (ret == -EBUSY) {
+		if (unlikely(list_empty(&bdev->swap_lru))) {
+			spin_unlock(&bdev->lru_lock);
+			return -EBUSY;
+		}
+
+		bo = list_first_entry(&bdev->swap_lru,
+				      struct ttm_buffer_object, swap);
+		kref_get(&bo->list_kref);
+
+		/**
+		 * Reserve buffer. Since we unlock while sleeping, we need
+		 * to re-check that nobody removed us from the swap-list while
+		 * we slept.
+		 */
+
+		ret = ttm_bo_reserve_locked(bo, false, true, false, 0);
+		if (unlikely(ret == -EBUSY)) {
+			spin_unlock(&bdev->lru_lock);
+			ttm_bo_wait_unreserved(bo, false);
+			kref_put(&bo->list_kref, ttm_bo_release_list);
+			spin_lock(&bdev->lru_lock);
+		}
+	}
+
+	BUG_ON(ret != 0);
+	put_count = ttm_bo_del_from_lru(bo);
+	spin_unlock(&bdev->lru_lock);
+
+	while (put_count--)
+		kref_put(&bo->list_kref, ttm_bo_ref_bug);
+
+	/**
+	 * Wait for GPU, then move to system cached.
+	 */
+
+	spin_lock(&bo->lock);
+	ret = ttm_bo_wait(bo, false, false, false);
+	spin_unlock(&bo->lock);
+
+	if (unlikely(ret != 0))
+		goto out;
+
+	if ((bo->mem.placement & swap_placement) != swap_placement) {
+		struct ttm_mem_reg evict_mem;
+
+		evict_mem = bo->mem;
+		evict_mem.mm_node = NULL;
+		evict_mem.placement = TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED;
+		evict_mem.mem_type = TTM_PL_SYSTEM;
+
+		ret = ttm_bo_handle_move_mem(bo, &evict_mem, true,
+					     false, false);
+		if (unlikely(ret != 0))
+			goto out;
+	}
+
+	ttm_bo_unmap_virtual(bo);
+
+	/**
+	 * Swap out. Buffer will be swapped in again as soon as
+	 * anyone tries to access a ttm page.
+	 */
+
+	ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage);
+out:
+
+	/**
+	 *
+	 * Unreserve without putting on LRU to avoid swapping out an
+	 * already swapped buffer.
+	 */
+
+	atomic_set(&bo->reserved, 0);
+	wake_up_all(&bo->event_queue);
+	kref_put(&bo->list_kref, ttm_bo_release_list);
+	return ret;
+}
+
+void ttm_bo_swapout_all(struct ttm_bo_device *bdev)
+{
+	while (ttm_bo_swapout(&bdev->shrink) == 0)
+		;
+}
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
new file mode 100644
index 00000000000..517c8455963
--- /dev/null
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -0,0 +1,561 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2007-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#include "ttm/ttm_bo_driver.h"
+#include "ttm/ttm_placement.h"
+#include <linux/io.h>
+#include <linux/highmem.h>
+#include <linux/wait.h>
+#include <linux/vmalloc.h>
+#include <linux/version.h>
+#include <linux/module.h>
+
+void ttm_bo_free_old_node(struct ttm_buffer_object *bo)
+{
+	struct ttm_mem_reg *old_mem = &bo->mem;
+
+	if (old_mem->mm_node) {
+		spin_lock(&bo->bdev->lru_lock);
+		drm_mm_put_block(old_mem->mm_node);
+		spin_unlock(&bo->bdev->lru_lock);
+	}
+	old_mem->mm_node = NULL;
+}
+
+int ttm_bo_move_ttm(struct ttm_buffer_object *bo,
+		    bool evict, bool no_wait, struct ttm_mem_reg *new_mem)
+{
+	struct ttm_tt *ttm = bo->ttm;
+	struct ttm_mem_reg *old_mem = &bo->mem;
+	uint32_t save_flags = old_mem->placement;
+	int ret;
+
+	if (old_mem->mem_type != TTM_PL_SYSTEM) {
+		ttm_tt_unbind(ttm);
+		ttm_bo_free_old_node(bo);
+		ttm_flag_masked(&old_mem->placement, TTM_PL_FLAG_SYSTEM,
+				TTM_PL_MASK_MEM);
+		old_mem->mem_type = TTM_PL_SYSTEM;
+		save_flags = old_mem->placement;
+	}
+
+	ret = ttm_tt_set_placement_caching(ttm, new_mem->placement);
+	if (unlikely(ret != 0))
+		return ret;
+
+	if (new_mem->mem_type != TTM_PL_SYSTEM) {
+		ret = ttm_tt_bind(ttm, new_mem);
+		if (unlikely(ret != 0))
+			return ret;
+	}
+
+	*old_mem = *new_mem;
+	new_mem->mm_node = NULL;
+	ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
+	return 0;
+}
+EXPORT_SYMBOL(ttm_bo_move_ttm);
+
+int ttm_mem_reg_ioremap(struct ttm_bo_device *bdev, struct ttm_mem_reg *mem,
+			void **virtual)
+{
+	struct ttm_mem_type_manager *man = &bdev->man[mem->mem_type];
+	unsigned long bus_offset;
+	unsigned long bus_size;
+	unsigned long bus_base;
+	int ret;
+	void *addr;
+
+	*virtual = NULL;
+	ret = ttm_bo_pci_offset(bdev, mem, &bus_base, &bus_offset, &bus_size);
+	if (ret || bus_size == 0)
+		return ret;
+
+	if (!(man->flags & TTM_MEMTYPE_FLAG_NEEDS_IOREMAP))
+		addr = (void *)(((u8 *) man->io_addr) + bus_offset);
+	else {
+		if (mem->placement & TTM_PL_FLAG_WC)
+			addr = ioremap_wc(bus_base + bus_offset, bus_size);
+		else
+			addr = ioremap_nocache(bus_base + bus_offset, bus_size);
+		if (!addr)
+			return -ENOMEM;
+	}
+	*virtual = addr;
+	return 0;
+}
+
+void ttm_mem_reg_iounmap(struct ttm_bo_device *bdev, struct ttm_mem_reg *mem,
+			 void *virtual)
+{
+	struct ttm_mem_type_manager *man;
+
+	man = &bdev->man[mem->mem_type];
+
+	if (virtual && (man->flags & TTM_MEMTYPE_FLAG_NEEDS_IOREMAP))
+		iounmap(virtual);
+}
+
+static int ttm_copy_io_page(void *dst, void *src, unsigned long page)
+{
+	uint32_t *dstP =
+	    (uint32_t *) ((unsigned long)dst + (page << PAGE_SHIFT));
+	uint32_t *srcP =
+	    (uint32_t *) ((unsigned long)src + (page << PAGE_SHIFT));
+
+	int i;
+	for (i = 0; i < PAGE_SIZE / sizeof(uint32_t); ++i)
+		iowrite32(ioread32(srcP++), dstP++);
+	return 0;
+}
+
+static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
+				unsigned long page)
+{
+	struct page *d = ttm_tt_get_page(ttm, page);
+	void *dst;
+
+	if (!d)
+		return -ENOMEM;
+
+	src = (void *)((unsigned long)src + (page << PAGE_SHIFT));
+	dst = kmap(d);
+	if (!dst)
+		return -ENOMEM;
+
+	memcpy_fromio(dst, src, PAGE_SIZE);
+	kunmap(d);
+	return 0;
+}
+
+static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
+				unsigned long page)
+{
+	struct page *s = ttm_tt_get_page(ttm, page);
+	void *src;
+
+	if (!s)
+		return -ENOMEM;
+
+	dst = (void *)((unsigned long)dst + (page << PAGE_SHIFT));
+	src = kmap(s);
+	if (!src)
+		return -ENOMEM;
+
+	memcpy_toio(dst, src, PAGE_SIZE);
+	kunmap(s);
+	return 0;
+}
+
+int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
+		       bool evict, bool no_wait, struct ttm_mem_reg *new_mem)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type];
+	struct ttm_tt *ttm = bo->ttm;
+	struct ttm_mem_reg *old_mem = &bo->mem;
+	struct ttm_mem_reg old_copy = *old_mem;
+	void *old_iomap;
+	void *new_iomap;
+	int ret;
+	uint32_t save_flags = old_mem->placement;
+	unsigned long i;
+	unsigned long page;
+	unsigned long add = 0;
+	int dir;
+
+	ret = ttm_mem_reg_ioremap(bdev, old_mem, &old_iomap);
+	if (ret)
+		return ret;
+	ret = ttm_mem_reg_ioremap(bdev, new_mem, &new_iomap);
+	if (ret)
+		goto out;
+
+	if (old_iomap == NULL && new_iomap == NULL)
+		goto out2;
+	if (old_iomap == NULL && ttm == NULL)
+		goto out2;
+
+	add = 0;
+	dir = 1;
+
+	if ((old_mem->mem_type == new_mem->mem_type) &&
+	    (new_mem->mm_node->start <
+	     old_mem->mm_node->start + old_mem->mm_node->size)) {
+		dir = -1;
+		add = new_mem->num_pages - 1;
+	}
+
+	for (i = 0; i < new_mem->num_pages; ++i) {
+		page = i * dir + add;
+		if (old_iomap == NULL)
+			ret = ttm_copy_ttm_io_page(ttm, new_iomap, page);
+		else if (new_iomap == NULL)
+			ret = ttm_copy_io_ttm_page(ttm, old_iomap, page);
+		else
+			ret = ttm_copy_io_page(new_iomap, old_iomap, page);
+		if (ret)
+			goto out1;
+	}
+	mb();
+out2:
+	ttm_bo_free_old_node(bo);
+
+	*old_mem = *new_mem;
+	new_mem->mm_node = NULL;
+	ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
+
+	if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && (ttm != NULL)) {
+		ttm_tt_unbind(ttm);
+		ttm_tt_destroy(ttm);
+		bo->ttm = NULL;
+	}
+
+out1:
+	ttm_mem_reg_iounmap(bdev, new_mem, new_iomap);
+out:
+	ttm_mem_reg_iounmap(bdev, &old_copy, old_iomap);
+	return ret;
+}
+EXPORT_SYMBOL(ttm_bo_move_memcpy);
+
+static void ttm_transfered_destroy(struct ttm_buffer_object *bo)
+{
+	kfree(bo);
+}
+
+/**
+ * ttm_buffer_object_transfer
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @new_obj: A pointer to a pointer to a newly created ttm_buffer_object,
+ * holding the data of @bo with the old placement.
+ *
+ * This is a utility function that may be called after an accelerated move
+ * has been scheduled. A new buffer object is created as a placeholder for
+ * the old data while it's being copied. When that buffer object is idle,
+ * it can be destroyed, releasing the space of the old placement.
+ * Returns:
+ * !0: Failure.
+ */
+
+static int ttm_buffer_object_transfer(struct ttm_buffer_object *bo,
+				      struct ttm_buffer_object **new_obj)
+{
+	struct ttm_buffer_object *fbo;
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct ttm_bo_driver *driver = bdev->driver;
+
+	fbo = kzalloc(sizeof(*fbo), GFP_KERNEL);
+	if (!fbo)
+		return -ENOMEM;
+
+	*fbo = *bo;
+
+	/**
+	 * Fix up members that we shouldn't copy directly:
+	 * TODO: Explicit member copy would probably be better here.
+	 */
+
+	spin_lock_init(&fbo->lock);
+	init_waitqueue_head(&fbo->event_queue);
+	INIT_LIST_HEAD(&fbo->ddestroy);
+	INIT_LIST_HEAD(&fbo->lru);
+	INIT_LIST_HEAD(&fbo->swap);
+	fbo->vm_node = NULL;
+
+	fbo->sync_obj = driver->sync_obj_ref(bo->sync_obj);
+	if (fbo->mem.mm_node)
+		fbo->mem.mm_node->private = (void *)fbo;
+	kref_init(&fbo->list_kref);
+	kref_init(&fbo->kref);
+	fbo->destroy = &ttm_transfered_destroy;
+
+	*new_obj = fbo;
+	return 0;
+}
+
+pgprot_t ttm_io_prot(uint32_t caching_flags, pgprot_t tmp)
+{
+#if defined(__i386__) || defined(__x86_64__)
+	if (caching_flags & TTM_PL_FLAG_WC)
+		tmp = pgprot_writecombine(tmp);
+	else if (boot_cpu_data.x86 > 3)
+		tmp = pgprot_noncached(tmp);
+
+#elif defined(__powerpc__)
+	if (!(caching_flags & TTM_PL_FLAG_CACHED)) {
+		pgprot_val(tmp) |= _PAGE_NO_CACHE;
+		if (caching_flags & TTM_PL_FLAG_UNCACHED)
+			pgprot_val(tmp) |= _PAGE_GUARDED;
+	}
+#endif
+#if defined(__ia64__)
+	if (caching_flags & TTM_PL_FLAG_WC)
+		tmp = pgprot_writecombine(tmp);
+	else
+		tmp = pgprot_noncached(tmp);
+#endif
+#if defined(__sparc__)
+	if (!(caching_flags & TTM_PL_FLAG_CACHED))
+		tmp = pgprot_noncached(tmp);
+#endif
+	return tmp;
+}
+
+static int ttm_bo_ioremap(struct ttm_buffer_object *bo,
+			  unsigned long bus_base,
+			  unsigned long bus_offset,
+			  unsigned long bus_size,
+			  struct ttm_bo_kmap_obj *map)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct ttm_mem_reg *mem = &bo->mem;
+	struct ttm_mem_type_manager *man = &bdev->man[mem->mem_type];
+
+	if (!(man->flags & TTM_MEMTYPE_FLAG_NEEDS_IOREMAP)) {
+		map->bo_kmap_type = ttm_bo_map_premapped;
+		map->virtual = (void *)(((u8 *) man->io_addr) + bus_offset);
+	} else {
+		map->bo_kmap_type = ttm_bo_map_iomap;
+		if (mem->placement & TTM_PL_FLAG_WC)
+			map->virtual = ioremap_wc(bus_base + bus_offset,
+						  bus_size);
+		else
+			map->virtual = ioremap_nocache(bus_base + bus_offset,
+						       bus_size);
+	}
+	return (!map->virtual) ? -ENOMEM : 0;
+}
+
+static int ttm_bo_kmap_ttm(struct ttm_buffer_object *bo,
+			   unsigned long start_page,
+			   unsigned long num_pages,
+			   struct ttm_bo_kmap_obj *map)
+{
+	struct ttm_mem_reg *mem = &bo->mem; pgprot_t prot;
+	struct ttm_tt *ttm = bo->ttm;
+	struct page *d;
+	int i;
+
+	BUG_ON(!ttm);
+	if (num_pages == 1 && (mem->placement & TTM_PL_FLAG_CACHED)) {
+		/*
+		 * We're mapping a single page, and the desired
+		 * page protection is consistent with the bo.
+		 */
+
+		map->bo_kmap_type = ttm_bo_map_kmap;
+		map->page = ttm_tt_get_page(ttm, start_page);
+		map->virtual = kmap(map->page);
+	} else {
+	    /*
+	     * Populate the part we're mapping;
+	     */
+		for (i = start_page; i < start_page + num_pages; ++i) {
+			d = ttm_tt_get_page(ttm, i);
+			if (!d)
+				return -ENOMEM;
+		}
+
+		/*
+		 * We need to use vmap to get the desired page protection
+		 * or to make the buffer object look contigous.
+		 */
+		prot = (mem->placement & TTM_PL_FLAG_CACHED) ?
+			PAGE_KERNEL :
+			ttm_io_prot(mem->placement, PAGE_KERNEL);
+		map->bo_kmap_type = ttm_bo_map_vmap;
+		map->virtual = vmap(ttm->pages + start_page, num_pages,
+				    0, prot);
+	}
+	return (!map->virtual) ? -ENOMEM : 0;
+}
+
+int ttm_bo_kmap(struct ttm_buffer_object *bo,
+		unsigned long start_page, unsigned long num_pages,
+		struct ttm_bo_kmap_obj *map)
+{
+	int ret;
+	unsigned long bus_base;
+	unsigned long bus_offset;
+	unsigned long bus_size;
+
+	BUG_ON(!list_empty(&bo->swap));
+	map->virtual = NULL;
+	if (num_pages > bo->num_pages)
+		return -EINVAL;
+	if (start_page > bo->num_pages)
+		return -EINVAL;
+#if 0
+	if (num_pages > 1 && !DRM_SUSER(DRM_CURPROC))
+		return -EPERM;
+#endif
+	ret = ttm_bo_pci_offset(bo->bdev, &bo->mem, &bus_base,
+				&bus_offset, &bus_size);
+	if (ret)
+		return ret;
+	if (bus_size == 0) {
+		return ttm_bo_kmap_ttm(bo, start_page, num_pages, map);
+	} else {
+		bus_offset += start_page << PAGE_SHIFT;
+		bus_size = num_pages << PAGE_SHIFT;
+		return ttm_bo_ioremap(bo, bus_base, bus_offset, bus_size, map);
+	}
+}
+EXPORT_SYMBOL(ttm_bo_kmap);
+
+void ttm_bo_kunmap(struct ttm_bo_kmap_obj *map)
+{
+	if (!map->virtual)
+		return;
+	switch (map->bo_kmap_type) {
+	case ttm_bo_map_iomap:
+		iounmap(map->virtual);
+		break;
+	case ttm_bo_map_vmap:
+		vunmap(map->virtual);
+		break;
+	case ttm_bo_map_kmap:
+		kunmap(map->page);
+		break;
+	case ttm_bo_map_premapped:
+		break;
+	default:
+		BUG();
+	}
+	map->virtual = NULL;
+	map->page = NULL;
+}
+EXPORT_SYMBOL(ttm_bo_kunmap);
+
+int ttm_bo_pfn_prot(struct ttm_buffer_object *bo,
+		    unsigned long dst_offset,
+		    unsigned long *pfn, pgprot_t *prot)
+{
+	struct ttm_mem_reg *mem = &bo->mem;
+	struct ttm_bo_device *bdev = bo->bdev;
+	unsigned long bus_offset;
+	unsigned long bus_size;
+	unsigned long bus_base;
+	int ret;
+	ret = ttm_bo_pci_offset(bdev, mem, &bus_base, &bus_offset,
+			&bus_size);
+	if (ret)
+		return -EINVAL;
+	if (bus_size != 0)
+		*pfn = (bus_base + bus_offset + dst_offset) >> PAGE_SHIFT;
+	else
+		if (!bo->ttm)
+			return -EINVAL;
+		else
+			*pfn = page_to_pfn(ttm_tt_get_page(bo->ttm,
+							   dst_offset >>
+							   PAGE_SHIFT));
+	*prot = (mem->placement & TTM_PL_FLAG_CACHED) ?
+		PAGE_KERNEL : ttm_io_prot(mem->placement, PAGE_KERNEL);
+
+	return 0;
+}
+
+int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
+			      void *sync_obj,
+			      void *sync_obj_arg,
+			      bool evict, bool no_wait,
+			      struct ttm_mem_reg *new_mem)
+{
+	struct ttm_bo_device *bdev = bo->bdev;
+	struct ttm_bo_driver *driver = bdev->driver;
+	struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type];
+	struct ttm_mem_reg *old_mem = &bo->mem;
+	int ret;
+	uint32_t save_flags = old_mem->placement;
+	struct ttm_buffer_object *ghost_obj;
+	void *tmp_obj = NULL;
+
+	spin_lock(&bo->lock);
+	if (bo->sync_obj) {
+		tmp_obj = bo->sync_obj;
+		bo->sync_obj = NULL;
+	}
+	bo->sync_obj = driver->sync_obj_ref(sync_obj);
+	bo->sync_obj_arg = sync_obj_arg;
+	if (evict) {
+		ret = ttm_bo_wait(bo, false, false, false);
+		spin_unlock(&bo->lock);
+		driver->sync_obj_unref(&bo->sync_obj);
+
+		if (ret)
+			return ret;
+
+		ttm_bo_free_old_node(bo);
+		if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) &&
+		    (bo->ttm != NULL)) {
+			ttm_tt_unbind(bo->ttm);
+			ttm_tt_destroy(bo->ttm);
+			bo->ttm = NULL;
+		}
+	} else {
+		/**
+		 * This should help pipeline ordinary buffer moves.
+		 *
+		 * Hang old buffer memory on a new buffer object,
+		 * and leave it to be released when the GPU
+		 * operation has completed.
+		 */
+
+		set_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags);
+		spin_unlock(&bo->lock);
+
+		ret = ttm_buffer_object_transfer(bo, &ghost_obj);
+		if (ret)
+			return ret;
+
+		/**
+		 * If we're not moving to fixed memory, the TTM object
+		 * needs to stay alive. Otherwhise hang it on the ghost
+		 * bo to be unbound and destroyed.
+		 */
+
+		if (!(man->flags & TTM_MEMTYPE_FLAG_FIXED))
+			ghost_obj->ttm = NULL;
+		else
+			bo->ttm = NULL;
+
+		ttm_bo_unreserve(ghost_obj);
+		ttm_bo_unref(&ghost_obj);
+	}
+
+	*old_mem = *new_mem;
+	new_mem->mm_node = NULL;
+	ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
+	return 0;
+}
+EXPORT_SYMBOL(ttm_bo_move_accel_cleanup);
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
new file mode 100644
index 00000000000..27b146c54fb
--- /dev/null
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -0,0 +1,454 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#include <ttm/ttm_module.h>
+#include <ttm/ttm_bo_driver.h>
+#include <ttm/ttm_placement.h>
+#include <linux/mm.h>
+#include <linux/version.h>
+#include <linux/rbtree.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+#define TTM_BO_VM_NUM_PREFAULT 16
+
+static struct ttm_buffer_object *ttm_bo_vm_lookup_rb(struct ttm_bo_device *bdev,
+						     unsigned long page_start,
+						     unsigned long num_pages)
+{
+	struct rb_node *cur = bdev->addr_space_rb.rb_node;
+	unsigned long cur_offset;
+	struct ttm_buffer_object *bo;
+	struct ttm_buffer_object *best_bo = NULL;
+
+	while (likely(cur != NULL)) {
+		bo = rb_entry(cur, struct ttm_buffer_object, vm_rb);
+		cur_offset = bo->vm_node->start;
+		if (page_start >= cur_offset) {
+			cur = cur->rb_right;
+			best_bo = bo;
+			if (page_start == cur_offset)
+				break;
+		} else
+			cur = cur->rb_left;
+	}
+
+	if (unlikely(best_bo == NULL))
+		return NULL;
+
+	if (unlikely((best_bo->vm_node->start + best_bo->num_pages) <
+		     (page_start + num_pages)))
+		return NULL;
+
+	return best_bo;
+}
+
+static int ttm_bo_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct ttm_buffer_object *bo = (struct ttm_buffer_object *)
+	    vma->vm_private_data;
+	struct ttm_bo_device *bdev = bo->bdev;
+	unsigned long bus_base;
+	unsigned long bus_offset;
+	unsigned long bus_size;
+	unsigned long page_offset;
+	unsigned long page_last;
+	unsigned long pfn;
+	struct ttm_tt *ttm = NULL;
+	struct page *page;
+	int ret;
+	int i;
+	bool is_iomem;
+	unsigned long address = (unsigned long)vmf->virtual_address;
+	int retval = VM_FAULT_NOPAGE;
+
+	/*
+	 * Work around locking order reversal in fault / nopfn
+	 * between mmap_sem and bo_reserve: Perform a trylock operation
+	 * for reserve, and if it fails, retry the fault after scheduling.
+	 */
+
+	ret = ttm_bo_reserve(bo, true, true, false, 0);
+	if (unlikely(ret != 0)) {
+		if (ret == -EBUSY)
+			set_need_resched();
+		return VM_FAULT_NOPAGE;
+	}
+
+	/*
+	 * Wait for buffer data in transit, due to a pipelined
+	 * move.
+	 */
+
+	spin_lock(&bo->lock);
+	if (test_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags)) {
+		ret = ttm_bo_wait(bo, false, true, false);
+		spin_unlock(&bo->lock);
+		if (unlikely(ret != 0)) {
+			retval = (ret != -ERESTART) ?
+			    VM_FAULT_SIGBUS : VM_FAULT_NOPAGE;
+			goto out_unlock;
+		}
+	} else
+		spin_unlock(&bo->lock);
+
+
+	ret = ttm_bo_pci_offset(bdev, &bo->mem, &bus_base, &bus_offset,
+				&bus_size);
+	if (unlikely(ret != 0)) {
+		retval = VM_FAULT_SIGBUS;
+		goto out_unlock;
+	}
+
+	is_iomem = (bus_size != 0);
+
+	page_offset = ((address - vma->vm_start) >> PAGE_SHIFT) +
+	    bo->vm_node->start - vma->vm_pgoff;
+	page_last = ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT) +
+	    bo->vm_node->start - vma->vm_pgoff;
+
+	if (unlikely(page_offset >= bo->num_pages)) {
+		retval = VM_FAULT_SIGBUS;
+		goto out_unlock;
+	}
+
+	/*
+	 * Strictly, we're not allowed to modify vma->vm_page_prot here,
+	 * since the mmap_sem is only held in read mode. However, we
+	 * modify only the caching bits of vma->vm_page_prot and
+	 * consider those bits protected by
+	 * the bo->mutex, as we should be the only writers.
+	 * There shouldn't really be any readers of these bits except
+	 * within vm_insert_mixed()? fork?
+	 *
+	 * TODO: Add a list of vmas to the bo, and change the
+	 * vma->vm_page_prot when the object changes caching policy, with
+	 * the correct locks held.
+	 */
+
+	if (is_iomem) {
+		vma->vm_page_prot = ttm_io_prot(bo->mem.placement,
+						vma->vm_page_prot);
+	} else {
+		ttm = bo->ttm;
+		vma->vm_page_prot = (bo->mem.placement & TTM_PL_FLAG_CACHED) ?
+		    vm_get_page_prot(vma->vm_flags) :
+		    ttm_io_prot(bo->mem.placement, vma->vm_page_prot);
+	}
+
+	/*
+	 * Speculatively prefault a number of pages. Only error on
+	 * first page.
+	 */
+
+	for (i = 0; i < TTM_BO_VM_NUM_PREFAULT; ++i) {
+
+		if (is_iomem)
+			pfn = ((bus_base + bus_offset) >> PAGE_SHIFT) +
+			    page_offset;
+		else {
+			page = ttm_tt_get_page(ttm, page_offset);
+			if (unlikely(!page && i == 0)) {
+				retval = VM_FAULT_OOM;
+				goto out_unlock;
+			} else if (unlikely(!page)) {
+				break;
+			}
+			pfn = page_to_pfn(page);
+		}
+
+		ret = vm_insert_mixed(vma, address, pfn);
+		/*
+		 * Somebody beat us to this PTE or prefaulting to
+		 * an already populated PTE, or prefaulting error.
+		 */
+
+		if (unlikely((ret == -EBUSY) || (ret != 0 && i > 0)))
+			break;
+		else if (unlikely(ret != 0)) {
+			retval =
+			    (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS;
+			goto out_unlock;
+
+		}
+
+		address += PAGE_SIZE;
+		if (unlikely(++page_offset >= page_last))
+			break;
+	}
+
+out_unlock:
+	ttm_bo_unreserve(bo);
+	return retval;
+}
+
+static void ttm_bo_vm_open(struct vm_area_struct *vma)
+{
+	struct ttm_buffer_object *bo =
+	    (struct ttm_buffer_object *)vma->vm_private_data;
+
+	(void)ttm_bo_reference(bo);
+}
+
+static void ttm_bo_vm_close(struct vm_area_struct *vma)
+{
+	struct ttm_buffer_object *bo =
+	    (struct ttm_buffer_object *)vma->vm_private_data;
+
+	ttm_bo_unref(&bo);
+	vma->vm_private_data = NULL;
+}
+
+static struct vm_operations_struct ttm_bo_vm_ops = {
+	.fault = ttm_bo_vm_fault,
+	.open = ttm_bo_vm_open,
+	.close = ttm_bo_vm_close
+};
+
+int ttm_bo_mmap(struct file *filp, struct vm_area_struct *vma,
+		struct ttm_bo_device *bdev)
+{
+	struct ttm_bo_driver *driver;
+	struct ttm_buffer_object *bo;
+	int ret;
+
+	read_lock(&bdev->vm_lock);
+	bo = ttm_bo_vm_lookup_rb(bdev, vma->vm_pgoff,
+				 (vma->vm_end - vma->vm_start) >> PAGE_SHIFT);
+	if (likely(bo != NULL))
+		ttm_bo_reference(bo);
+	read_unlock(&bdev->vm_lock);
+
+	if (unlikely(bo == NULL)) {
+		printk(KERN_ERR TTM_PFX
+		       "Could not find buffer object to map.\n");
+		return -EINVAL;
+	}
+
+	driver = bo->bdev->driver;
+	if (unlikely(!driver->verify_access)) {
+		ret = -EPERM;
+		goto out_unref;
+	}
+	ret = driver->verify_access(bo, filp);
+	if (unlikely(ret != 0))
+		goto out_unref;
+
+	vma->vm_ops = &ttm_bo_vm_ops;
+
+	/*
+	 * Note: We're transferring the bo reference to
+	 * vma->vm_private_data here.
+	 */
+
+	vma->vm_private_data = bo;
+	vma->vm_flags |= VM_RESERVED | VM_IO | VM_MIXEDMAP | VM_DONTEXPAND;
+	return 0;
+out_unref:
+	ttm_bo_unref(&bo);
+	return ret;
+}
+EXPORT_SYMBOL(ttm_bo_mmap);
+
+int ttm_fbdev_mmap(struct vm_area_struct *vma, struct ttm_buffer_object *bo)
+{
+	if (vma->vm_pgoff != 0)
+		return -EACCES;
+
+	vma->vm_ops = &ttm_bo_vm_ops;
+	vma->vm_private_data = ttm_bo_reference(bo);
+	vma->vm_flags |= VM_RESERVED | VM_IO | VM_MIXEDMAP | VM_DONTEXPAND;
+	return 0;
+}
+EXPORT_SYMBOL(ttm_fbdev_mmap);
+
+
+ssize_t ttm_bo_io(struct ttm_bo_device *bdev, struct file *filp,
+		  const char __user *wbuf, char __user *rbuf, size_t count,
+		  loff_t *f_pos, bool write)
+{
+	struct ttm_buffer_object *bo;
+	struct ttm_bo_driver *driver;
+	struct ttm_bo_kmap_obj map;
+	unsigned long dev_offset = (*f_pos >> PAGE_SHIFT);
+	unsigned long kmap_offset;
+	unsigned long kmap_end;
+	unsigned long kmap_num;
+	size_t io_size;
+	unsigned int page_offset;
+	char *virtual;
+	int ret;
+	bool no_wait = false;
+	bool dummy;
+
+	read_lock(&bdev->vm_lock);
+	bo = ttm_bo_vm_lookup_rb(bdev, dev_offset, 1);
+	if (likely(bo != NULL))
+		ttm_bo_reference(bo);
+	read_unlock(&bdev->vm_lock);
+
+	if (unlikely(bo == NULL))
+		return -EFAULT;
+
+	driver = bo->bdev->driver;
+	if (unlikely(driver->verify_access)) {
+		ret = -EPERM;
+		goto out_unref;
+	}
+
+	ret = driver->verify_access(bo, filp);
+	if (unlikely(ret != 0))
+		goto out_unref;
+
+	kmap_offset = dev_offset - bo->vm_node->start;
+	if (unlikely(kmap_offset) >= bo->num_pages) {
+		ret = -EFBIG;
+		goto out_unref;
+	}
+
+	page_offset = *f_pos & ~PAGE_MASK;
+	io_size = bo->num_pages - kmap_offset;
+	io_size = (io_size << PAGE_SHIFT) - page_offset;
+	if (count < io_size)
+		io_size = count;
+
+	kmap_end = (*f_pos + count - 1) >> PAGE_SHIFT;
+	kmap_num = kmap_end - kmap_offset + 1;
+
+	ret = ttm_bo_reserve(bo, true, no_wait, false, 0);
+
+	switch (ret) {
+	case 0:
+		break;
+	case -ERESTART:
+		ret = -EINTR;
+		goto out_unref;
+	case -EBUSY:
+		ret = -EAGAIN;
+		goto out_unref;
+	default:
+		goto out_unref;
+	}
+
+	ret = ttm_bo_kmap(bo, kmap_offset, kmap_num, &map);
+	if (unlikely(ret != 0)) {
+		ttm_bo_unreserve(bo);
+		goto out_unref;
+	}
+
+	virtual = ttm_kmap_obj_virtual(&map, &dummy);
+	virtual += page_offset;
+
+	if (write)
+		ret = copy_from_user(virtual, wbuf, io_size);
+	else
+		ret = copy_to_user(rbuf, virtual, io_size);
+
+	ttm_bo_kunmap(&map);
+	ttm_bo_unreserve(bo);
+	ttm_bo_unref(&bo);
+
+	if (unlikely(ret != 0))
+		return -EFBIG;
+
+	*f_pos += io_size;
+
+	return io_size;
+out_unref:
+	ttm_bo_unref(&bo);
+	return ret;
+}
+
+ssize_t ttm_bo_fbdev_io(struct ttm_buffer_object *bo, const char __user *wbuf,
+			char __user *rbuf, size_t count, loff_t *f_pos,
+			bool write)
+{
+	struct ttm_bo_kmap_obj map;
+	unsigned long kmap_offset;
+	unsigned long kmap_end;
+	unsigned long kmap_num;
+	size_t io_size;
+	unsigned int page_offset;
+	char *virtual;
+	int ret;
+	bool no_wait = false;
+	bool dummy;
+
+	kmap_offset = (*f_pos >> PAGE_SHIFT);
+	if (unlikely(kmap_offset) >= bo->num_pages)
+		return -EFBIG;
+
+	page_offset = *f_pos & ~PAGE_MASK;
+	io_size = bo->num_pages - kmap_offset;
+	io_size = (io_size << PAGE_SHIFT) - page_offset;
+	if (count < io_size)
+		io_size = count;
+
+	kmap_end = (*f_pos + count - 1) >> PAGE_SHIFT;
+	kmap_num = kmap_end - kmap_offset + 1;
+
+	ret = ttm_bo_reserve(bo, true, no_wait, false, 0);
+
+	switch (ret) {
+	case 0:
+		break;
+	case -ERESTART:
+		return -EINTR;
+	case -EBUSY:
+		return -EAGAIN;
+	default:
+		return ret;
+	}
+
+	ret = ttm_bo_kmap(bo, kmap_offset, kmap_num, &map);
+	if (unlikely(ret != 0)) {
+		ttm_bo_unreserve(bo);
+		return ret;
+	}
+
+	virtual = ttm_kmap_obj_virtual(&map, &dummy);
+	virtual += page_offset;
+
+	if (write)
+		ret = copy_from_user(virtual, wbuf, io_size);
+	else
+		ret = copy_to_user(rbuf, virtual, io_size);
+
+	ttm_bo_kunmap(&map);
+	ttm_bo_unreserve(bo);
+	ttm_bo_unref(&bo);
+
+	if (unlikely(ret != 0))
+		return ret;
+
+	*f_pos += io_size;
+
+	return io_size;
+}
diff --git a/drivers/gpu/drm/ttm/ttm_global.c b/drivers/gpu/drm/ttm/ttm_global.c
new file mode 100644
index 00000000000..0b14eb1972b
--- /dev/null
+++ b/drivers/gpu/drm/ttm/ttm_global.c
@@ -0,0 +1,114 @@
+/**************************************************************************
+ *
+ * Copyright 2008-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#include "ttm/ttm_module.h"
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+struct ttm_global_item {
+	struct mutex mutex;
+	void *object;
+	int refcount;
+};
+
+static struct ttm_global_item glob[TTM_GLOBAL_NUM];
+
+void ttm_global_init(void)
+{
+	int i;
+
+	for (i = 0; i < TTM_GLOBAL_NUM; ++i) {
+		struct ttm_global_item *item = &glob[i];
+		mutex_init(&item->mutex);
+		item->object = NULL;
+		item->refcount = 0;
+	}
+}
+
+void ttm_global_release(void)
+{
+	int i;
+	for (i = 0; i < TTM_GLOBAL_NUM; ++i) {
+		struct ttm_global_item *item = &glob[i];
+		BUG_ON(item->object != NULL);
+		BUG_ON(item->refcount != 0);
+	}
+}
+
+int ttm_global_item_ref(struct ttm_global_reference *ref)
+{
+	int ret;
+	struct ttm_global_item *item = &glob[ref->global_type];
+	void *object;
+
+	mutex_lock(&item->mutex);
+	if (item->refcount == 0) {
+		item->object = kmalloc(ref->size, GFP_KERNEL);
+		if (unlikely(item->object == NULL)) {
+			ret = -ENOMEM;
+			goto out_err;
+		}
+
+		ref->object = item->object;
+		ret = ref->init(ref);
+		if (unlikely(ret != 0))
+			goto out_err;
+
+		++item->refcount;
+	}
+	ref->object = item->object;
+	object = item->object;
+	mutex_unlock(&item->mutex);
+	return 0;
+out_err:
+	kfree(item->object);
+	mutex_unlock(&item->mutex);
+	item->object = NULL;
+	return ret;
+}
+EXPORT_SYMBOL(ttm_global_item_ref);
+
+void ttm_global_item_unref(struct ttm_global_reference *ref)
+{
+	struct ttm_global_item *item = &glob[ref->global_type];
+
+	mutex_lock(&item->mutex);
+	BUG_ON(item->refcount == 0);
+	BUG_ON(ref->object != item->object);
+	if (--item->refcount == 0) {
+		ref->release(ref);
+		kfree(item->object);
+		item->object = NULL;
+	}
+	mutex_unlock(&item->mutex);
+}
+EXPORT_SYMBOL(ttm_global_item_unref);
+
diff --git a/drivers/gpu/drm/ttm/ttm_memory.c b/drivers/gpu/drm/ttm/ttm_memory.c
new file mode 100644
index 00000000000..87323d4ff68
--- /dev/null
+++ b/drivers/gpu/drm/ttm/ttm_memory.c
@@ -0,0 +1,234 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+#include "ttm/ttm_memory.h"
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#define TTM_PFX "[TTM] "
+#define TTM_MEMORY_ALLOC_RETRIES 4
+
+/**
+ * At this point we only support a single shrink callback.
+ * Extend this if needed, perhaps using a linked list of callbacks.
+ * Note that this function is reentrant:
+ * many threads may try to swap out at any given time.
+ */
+
+static void ttm_shrink(struct ttm_mem_global *glob, bool from_workqueue,
+		       uint64_t extra)
+{
+	int ret;
+	struct ttm_mem_shrink *shrink;
+	uint64_t target;
+	uint64_t total_target;
+
+	spin_lock(&glob->lock);
+	if (glob->shrink == NULL)
+		goto out;
+
+	if (from_workqueue) {
+		target = glob->swap_limit;
+		total_target = glob->total_memory_swap_limit;
+	} else if (capable(CAP_SYS_ADMIN)) {
+		total_target = glob->emer_total_memory;
+		target = glob->emer_memory;
+	} else {
+		total_target = glob->max_total_memory;
+		target = glob->max_memory;
+	}
+
+	total_target = (extra >= total_target) ? 0 : total_target - extra;
+	target = (extra >= target) ? 0 : target - extra;
+
+	while (glob->used_memory > target ||
+	       glob->used_total_memory > total_target) {
+		shrink = glob->shrink;
+		spin_unlock(&glob->lock);
+		ret = shrink->do_shrink(shrink);
+		spin_lock(&glob->lock);
+		if (unlikely(ret != 0))
+			goto out;
+	}
+out:
+	spin_unlock(&glob->lock);
+}
+
+static void ttm_shrink_work(struct work_struct *work)
+{
+	struct ttm_mem_global *glob =
+	    container_of(work, struct ttm_mem_global, work);
+
+	ttm_shrink(glob, true, 0ULL);
+}
+
+int ttm_mem_global_init(struct ttm_mem_global *glob)
+{
+	struct sysinfo si;
+	uint64_t mem;
+
+	spin_lock_init(&glob->lock);
+	glob->swap_queue = create_singlethread_workqueue("ttm_swap");
+	INIT_WORK(&glob->work, ttm_shrink_work);
+	init_waitqueue_head(&glob->queue);
+
+	si_meminfo(&si);
+
+	mem = si.totalram - si.totalhigh;
+	mem *= si.mem_unit;
+
+	glob->max_memory = mem >> 1;
+	glob->emer_memory = (mem >> 1) + (mem >> 2);
+	glob->swap_limit = glob->max_memory - (mem >> 3);
+	glob->used_memory = 0;
+	glob->used_total_memory = 0;
+	glob->shrink = NULL;
+
+	mem = si.totalram;
+	mem *= si.mem_unit;
+
+	glob->max_total_memory = mem >> 1;
+	glob->emer_total_memory = (mem >> 1) + (mem >> 2);
+
+	glob->total_memory_swap_limit = glob->max_total_memory - (mem >> 3);
+
+	printk(KERN_INFO TTM_PFX "TTM available graphics memory: %llu MiB\n",
+	       glob->max_total_memory >> 20);
+	printk(KERN_INFO TTM_PFX "TTM available object memory: %llu MiB\n",
+	       glob->max_memory >> 20);
+
+	return 0;
+}
+EXPORT_SYMBOL(ttm_mem_global_init);
+
+void ttm_mem_global_release(struct ttm_mem_global *glob)
+{
+	printk(KERN_INFO TTM_PFX "Used total memory is %llu bytes.\n",
+	       (unsigned long long)glob->used_total_memory);
+	flush_workqueue(glob->swap_queue);
+	destroy_workqueue(glob->swap_queue);
+	glob->swap_queue = NULL;
+}
+EXPORT_SYMBOL(ttm_mem_global_release);
+
+static inline void ttm_check_swapping(struct ttm_mem_global *glob)
+{
+	bool needs_swapping;
+
+	spin_lock(&glob->lock);
+	needs_swapping = (glob->used_memory > glob->swap_limit ||
+			  glob->used_total_memory >
+			  glob->total_memory_swap_limit);
+	spin_unlock(&glob->lock);
+
+	if (unlikely(needs_swapping))
+		(void)queue_work(glob->swap_queue, &glob->work);
+
+}
+
+void ttm_mem_global_free(struct ttm_mem_global *glob,
+			 uint64_t amount, bool himem)
+{
+	spin_lock(&glob->lock);
+	glob->used_total_memory -= amount;
+	if (!himem)
+		glob->used_memory -= amount;
+	wake_up_all(&glob->queue);
+	spin_unlock(&glob->lock);
+}
+
+static int ttm_mem_global_reserve(struct ttm_mem_global *glob,
+				  uint64_t amount, bool himem, bool reserve)
+{
+	uint64_t limit;
+	uint64_t lomem_limit;
+	int ret = -ENOMEM;
+
+	spin_lock(&glob->lock);
+
+	if (capable(CAP_SYS_ADMIN)) {
+		limit = glob->emer_total_memory;
+		lomem_limit = glob->emer_memory;
+	} else {
+		limit = glob->max_total_memory;
+		lomem_limit = glob->max_memory;
+	}
+
+	if (unlikely(glob->used_total_memory + amount > limit))
+		goto out_unlock;
+	if (unlikely(!himem && glob->used_memory + amount > lomem_limit))
+		goto out_unlock;
+
+	if (reserve) {
+		glob->used_total_memory += amount;
+		if (!himem)
+			glob->used_memory += amount;
+	}
+	ret = 0;
+out_unlock:
+	spin_unlock(&glob->lock);
+	ttm_check_swapping(glob);
+
+	return ret;
+}
+
+int ttm_mem_global_alloc(struct ttm_mem_global *glob, uint64_t memory,
+			 bool no_wait, bool interruptible, bool himem)
+{
+	int count = TTM_MEMORY_ALLOC_RETRIES;
+
+	while (unlikely(ttm_mem_global_reserve(glob, memory, himem, true)
+			!= 0)) {
+		if (no_wait)
+			return -ENOMEM;
+		if (unlikely(count-- == 0))
+			return -ENOMEM;
+		ttm_shrink(glob, false, memory + (memory >> 2) + 16);
+	}
+
+	return 0;
+}
+
+size_t ttm_round_pot(size_t size)
+{
+	if ((size & (size - 1)) == 0)
+		return size;
+	else if (size > PAGE_SIZE)
+		return PAGE_ALIGN(size);
+	else {
+		size_t tmp_size = 4;
+
+		while (tmp_size < size)
+			tmp_size <<= 1;
+
+		return tmp_size;
+	}
+	return 0;
+}
diff --git a/drivers/gpu/drm/ttm/ttm_module.c b/drivers/gpu/drm/ttm/ttm_module.c
new file mode 100644
index 00000000000..59ce8191d58
--- /dev/null
+++ b/drivers/gpu/drm/ttm/ttm_module.c
@@ -0,0 +1,50 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ * 	    Jerome Glisse
+ */
+#include <linux/module.h>
+#include <ttm/ttm_module.h>
+
+static int __init ttm_init(void)
+{
+	ttm_global_init();
+	return 0;
+}
+
+static void __exit ttm_exit(void)
+{
+	ttm_global_release();
+}
+
+module_init(ttm_init);
+module_exit(ttm_exit);
+
+MODULE_AUTHOR("Thomas Hellstrom, Jerome Glisse");
+MODULE_DESCRIPTION("TTM memory manager subsystem (for DRM device)");
+MODULE_LICENSE("GPL and additional rights");
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
new file mode 100644
index 00000000000..c27ab3a877a
--- /dev/null
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -0,0 +1,635 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#include <linux/version.h>
+#include <linux/vmalloc.h>
+#include <linux/sched.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/file.h>
+#include <linux/swap.h>
+#include "ttm/ttm_module.h"
+#include "ttm/ttm_bo_driver.h"
+#include "ttm/ttm_placement.h"
+
+static int ttm_tt_swapin(struct ttm_tt *ttm);
+
+#if defined(CONFIG_X86)
+static void ttm_tt_clflush_page(struct page *page)
+{
+	uint8_t *page_virtual;
+	unsigned int i;
+
+	if (unlikely(page == NULL))
+		return;
+
+	page_virtual = kmap_atomic(page, KM_USER0);
+
+	for (i = 0; i < PAGE_SIZE; i += boot_cpu_data.x86_clflush_size)
+		clflush(page_virtual + i);
+
+	kunmap_atomic(page_virtual, KM_USER0);
+}
+
+static void ttm_tt_cache_flush_clflush(struct page *pages[],
+				       unsigned long num_pages)
+{
+	unsigned long i;
+
+	mb();
+	for (i = 0; i < num_pages; ++i)
+		ttm_tt_clflush_page(*pages++);
+	mb();
+}
+#else
+static void ttm_tt_ipi_handler(void *null)
+{
+	;
+}
+#endif
+
+void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages)
+{
+
+#if defined(CONFIG_X86)
+	if (cpu_has_clflush) {
+		ttm_tt_cache_flush_clflush(pages, num_pages);
+		return;
+	}
+#else
+	if (on_each_cpu(ttm_tt_ipi_handler, NULL, 1) != 0)
+		printk(KERN_ERR TTM_PFX
+		       "Timed out waiting for drm cache flush.\n");
+#endif
+}
+
+/**
+ * Allocates storage for pointers to the pages that back the ttm.
+ *
+ * Uses kmalloc if possible. Otherwise falls back to vmalloc.
+ */
+static void ttm_tt_alloc_page_directory(struct ttm_tt *ttm)
+{
+	unsigned long size = ttm->num_pages * sizeof(*ttm->pages);
+	ttm->pages = NULL;
+
+	if (size <= PAGE_SIZE)
+		ttm->pages = kzalloc(size, GFP_KERNEL);
+
+	if (!ttm->pages) {
+		ttm->pages = vmalloc_user(size);
+		if (ttm->pages)
+			ttm->page_flags |= TTM_PAGE_FLAG_VMALLOC;
+	}
+}
+
+static void ttm_tt_free_page_directory(struct ttm_tt *ttm)
+{
+	if (ttm->page_flags & TTM_PAGE_FLAG_VMALLOC) {
+		vfree(ttm->pages);
+		ttm->page_flags &= ~TTM_PAGE_FLAG_VMALLOC;
+	} else {
+		kfree(ttm->pages);
+	}
+	ttm->pages = NULL;
+}
+
+static struct page *ttm_tt_alloc_page(unsigned page_flags)
+{
+	if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC)
+		return alloc_page(GFP_HIGHUSER | __GFP_ZERO);
+
+	return alloc_page(GFP_HIGHUSER);
+}
+
+static void ttm_tt_free_user_pages(struct ttm_tt *ttm)
+{
+	int write;
+	int dirty;
+	struct page *page;
+	int i;
+	struct ttm_backend *be = ttm->be;
+
+	BUG_ON(!(ttm->page_flags & TTM_PAGE_FLAG_USER));
+	write = ((ttm->page_flags & TTM_PAGE_FLAG_WRITE) != 0);
+	dirty = ((ttm->page_flags & TTM_PAGE_FLAG_USER_DIRTY) != 0);
+
+	if (be)
+		be->func->clear(be);
+
+	for (i = 0; i < ttm->num_pages; ++i) {
+		page = ttm->pages[i];
+		if (page == NULL)
+			continue;
+
+		if (page == ttm->dummy_read_page) {
+			BUG_ON(write);
+			continue;
+		}
+
+		if (write && dirty && !PageReserved(page))
+			set_page_dirty_lock(page);
+
+		ttm->pages[i] = NULL;
+		ttm_mem_global_free(ttm->bdev->mem_glob, PAGE_SIZE, false);
+		put_page(page);
+	}
+	ttm->state = tt_unpopulated;
+	ttm->first_himem_page = ttm->num_pages;
+	ttm->last_lomem_page = -1;
+}
+
+static struct page *__ttm_tt_get_page(struct ttm_tt *ttm, int index)
+{
+	struct page *p;
+	struct ttm_bo_device *bdev = ttm->bdev;
+	struct ttm_mem_global *mem_glob = bdev->mem_glob;
+	int ret;
+
+	while (NULL == (p = ttm->pages[index])) {
+		p = ttm_tt_alloc_page(ttm->page_flags);
+
+		if (!p)
+			return NULL;
+
+		if (PageHighMem(p)) {
+			ret =
+			    ttm_mem_global_alloc(mem_glob, PAGE_SIZE,
+						 false, false, true);
+			if (unlikely(ret != 0))
+				goto out_err;
+			ttm->pages[--ttm->first_himem_page] = p;
+		} else {
+			ret =
+			    ttm_mem_global_alloc(mem_glob, PAGE_SIZE,
+						 false, false, false);
+			if (unlikely(ret != 0))
+				goto out_err;
+			ttm->pages[++ttm->last_lomem_page] = p;
+		}
+	}
+	return p;
+out_err:
+	put_page(p);
+	return NULL;
+}
+
+struct page *ttm_tt_get_page(struct ttm_tt *ttm, int index)
+{
+	int ret;
+
+	if (unlikely(ttm->page_flags & TTM_PAGE_FLAG_SWAPPED)) {
+		ret = ttm_tt_swapin(ttm);
+		if (unlikely(ret != 0))
+			return NULL;
+	}
+	return __ttm_tt_get_page(ttm, index);
+}
+
+int ttm_tt_populate(struct ttm_tt *ttm)
+{
+	struct page *page;
+	unsigned long i;
+	struct ttm_backend *be;
+	int ret;
+
+	if (ttm->state != tt_unpopulated)
+		return 0;
+
+	if (unlikely(ttm->page_flags & TTM_PAGE_FLAG_SWAPPED)) {
+		ret = ttm_tt_swapin(ttm);
+		if (unlikely(ret != 0))
+			return ret;
+	}
+
+	be = ttm->be;
+
+	for (i = 0; i < ttm->num_pages; ++i) {
+		page = __ttm_tt_get_page(ttm, i);
+		if (!page)
+			return -ENOMEM;
+	}
+
+	be->func->populate(be, ttm->num_pages, ttm->pages,
+			   ttm->dummy_read_page);
+	ttm->state = tt_unbound;
+	return 0;
+}
+
+#ifdef CONFIG_X86
+static inline int ttm_tt_set_page_caching(struct page *p,
+					  enum ttm_caching_state c_state)
+{
+	if (PageHighMem(p))
+		return 0;
+
+	switch (c_state) {
+	case tt_cached:
+		return set_pages_wb(p, 1);
+	case tt_wc:
+	    return set_memory_wc((unsigned long) page_address(p), 1);
+	default:
+		return set_pages_uc(p, 1);
+	}
+}
+#else /* CONFIG_X86 */
+static inline int ttm_tt_set_page_caching(struct page *p,
+					  enum ttm_caching_state c_state)
+{
+	return 0;
+}
+#endif /* CONFIG_X86 */
+
+/*
+ * Change caching policy for the linear kernel map
+ * for range of pages in a ttm.
+ */
+
+static int ttm_tt_set_caching(struct ttm_tt *ttm,
+			      enum ttm_caching_state c_state)
+{
+	int i, j;
+	struct page *cur_page;
+	int ret;
+
+	if (ttm->caching_state == c_state)
+		return 0;
+
+	if (c_state != tt_cached) {
+		ret = ttm_tt_populate(ttm);
+		if (unlikely(ret != 0))
+			return ret;
+	}
+
+	if (ttm->caching_state == tt_cached)
+		ttm_tt_cache_flush(ttm->pages, ttm->num_pages);
+
+	for (i = 0; i < ttm->num_pages; ++i) {
+		cur_page = ttm->pages[i];
+		if (likely(cur_page != NULL)) {
+			ret = ttm_tt_set_page_caching(cur_page, c_state);
+			if (unlikely(ret != 0))
+				goto out_err;
+		}
+	}
+
+	ttm->caching_state = c_state;
+
+	return 0;
+
+out_err:
+	for (j = 0; j < i; ++j) {
+		cur_page = ttm->pages[j];
+		if (likely(cur_page != NULL)) {
+			(void)ttm_tt_set_page_caching(cur_page,
+						      ttm->caching_state);
+		}
+	}
+
+	return ret;
+}
+
+int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement)
+{
+	enum ttm_caching_state state;
+
+	if (placement & TTM_PL_FLAG_WC)
+		state = tt_wc;
+	else if (placement & TTM_PL_FLAG_UNCACHED)
+		state = tt_uncached;
+	else
+		state = tt_cached;
+
+	return ttm_tt_set_caching(ttm, state);
+}
+
+static void ttm_tt_free_alloced_pages(struct ttm_tt *ttm)
+{
+	int i;
+	struct page *cur_page;
+	struct ttm_backend *be = ttm->be;
+
+	if (be)
+		be->func->clear(be);
+	(void)ttm_tt_set_caching(ttm, tt_cached);
+	for (i = 0; i < ttm->num_pages; ++i) {
+		cur_page = ttm->pages[i];
+		ttm->pages[i] = NULL;
+		if (cur_page) {
+			if (page_count(cur_page) != 1)
+				printk(KERN_ERR TTM_PFX
+				       "Erroneous page count. "
+				       "Leaking pages.\n");
+			ttm_mem_global_free(ttm->bdev->mem_glob, PAGE_SIZE,
+					    PageHighMem(cur_page));
+			__free_page(cur_page);
+		}
+	}
+	ttm->state = tt_unpopulated;
+	ttm->first_himem_page = ttm->num_pages;
+	ttm->last_lomem_page = -1;
+}
+
+void ttm_tt_destroy(struct ttm_tt *ttm)
+{
+	struct ttm_backend *be;
+
+	if (unlikely(ttm == NULL))
+		return;
+
+	be = ttm->be;
+	if (likely(be != NULL)) {
+		be->func->destroy(be);
+		ttm->be = NULL;
+	}
+
+	if (likely(ttm->pages != NULL)) {
+		if (ttm->page_flags & TTM_PAGE_FLAG_USER)
+			ttm_tt_free_user_pages(ttm);
+		else
+			ttm_tt_free_alloced_pages(ttm);
+
+		ttm_tt_free_page_directory(ttm);
+	}
+
+	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP) &&
+	    ttm->swap_storage)
+		fput(ttm->swap_storage);
+
+	kfree(ttm);
+}
+
+int ttm_tt_set_user(struct ttm_tt *ttm,
+		    struct task_struct *tsk,
+		    unsigned long start, unsigned long num_pages)
+{
+	struct mm_struct *mm = tsk->mm;
+	int ret;
+	int write = (ttm->page_flags & TTM_PAGE_FLAG_WRITE) != 0;
+	struct ttm_mem_global *mem_glob = ttm->bdev->mem_glob;
+
+	BUG_ON(num_pages != ttm->num_pages);
+	BUG_ON((ttm->page_flags & TTM_PAGE_FLAG_USER) == 0);
+
+	/**
+	 * Account user pages as lowmem pages for now.
+	 */
+
+	ret = ttm_mem_global_alloc(mem_glob, num_pages * PAGE_SIZE,
+				   false, false, false);
+	if (unlikely(ret != 0))
+		return ret;
+
+	down_read(&mm->mmap_sem);
+	ret = get_user_pages(tsk, mm, start, num_pages,
+			     write, 0, ttm->pages, NULL);
+	up_read(&mm->mmap_sem);
+
+	if (ret != num_pages && write) {
+		ttm_tt_free_user_pages(ttm);
+		ttm_mem_global_free(mem_glob, num_pages * PAGE_SIZE, false);
+		return -ENOMEM;
+	}
+
+	ttm->tsk = tsk;
+	ttm->start = start;
+	ttm->state = tt_unbound;
+
+	return 0;
+}
+
+struct ttm_tt *ttm_tt_create(struct ttm_bo_device *bdev, unsigned long size,
+			     uint32_t page_flags, struct page *dummy_read_page)
+{
+	struct ttm_bo_driver *bo_driver = bdev->driver;
+	struct ttm_tt *ttm;
+
+	if (!bo_driver)
+		return NULL;
+
+	ttm = kzalloc(sizeof(*ttm), GFP_KERNEL);
+	if (!ttm)
+		return NULL;
+
+	ttm->bdev = bdev;
+
+	ttm->num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	ttm->first_himem_page = ttm->num_pages;
+	ttm->last_lomem_page = -1;
+	ttm->caching_state = tt_cached;
+	ttm->page_flags = page_flags;
+
+	ttm->dummy_read_page = dummy_read_page;
+
+	ttm_tt_alloc_page_directory(ttm);
+	if (!ttm->pages) {
+		ttm_tt_destroy(ttm);
+		printk(KERN_ERR TTM_PFX "Failed allocating page table\n");
+		return NULL;
+	}
+	ttm->be = bo_driver->create_ttm_backend_entry(bdev);
+	if (!ttm->be) {
+		ttm_tt_destroy(ttm);
+		printk(KERN_ERR TTM_PFX "Failed creating ttm backend entry\n");
+		return NULL;
+	}
+	ttm->state = tt_unpopulated;
+	return ttm;
+}
+
+void ttm_tt_unbind(struct ttm_tt *ttm)
+{
+	int ret;
+	struct ttm_backend *be = ttm->be;
+
+	if (ttm->state == tt_bound) {
+		ret = be->func->unbind(be);
+		BUG_ON(ret);
+		ttm->state = tt_unbound;
+	}
+}
+
+int ttm_tt_bind(struct ttm_tt *ttm, struct ttm_mem_reg *bo_mem)
+{
+	int ret = 0;
+	struct ttm_backend *be;
+
+	if (!ttm)
+		return -EINVAL;
+
+	if (ttm->state == tt_bound)
+		return 0;
+
+	be = ttm->be;
+
+	ret = ttm_tt_populate(ttm);
+	if (ret)
+		return ret;
+
+	ret = be->func->bind(be, bo_mem);
+	if (ret) {
+		printk(KERN_ERR TTM_PFX "Couldn't bind backend.\n");
+		return ret;
+	}
+
+	ttm->state = tt_bound;
+
+	if (ttm->page_flags & TTM_PAGE_FLAG_USER)
+		ttm->page_flags |= TTM_PAGE_FLAG_USER_DIRTY;
+	return 0;
+}
+EXPORT_SYMBOL(ttm_tt_bind);
+
+static int ttm_tt_swapin(struct ttm_tt *ttm)
+{
+	struct address_space *swap_space;
+	struct file *swap_storage;
+	struct page *from_page;
+	struct page *to_page;
+	void *from_virtual;
+	void *to_virtual;
+	int i;
+	int ret;
+
+	if (ttm->page_flags & TTM_PAGE_FLAG_USER) {
+		ret = ttm_tt_set_user(ttm, ttm->tsk, ttm->start,
+				      ttm->num_pages);
+		if (unlikely(ret != 0))
+			return ret;
+
+		ttm->page_flags &= ~TTM_PAGE_FLAG_SWAPPED;
+		return 0;
+	}
+
+	swap_storage = ttm->swap_storage;
+	BUG_ON(swap_storage == NULL);
+
+	swap_space = swap_storage->f_path.dentry->d_inode->i_mapping;
+
+	for (i = 0; i < ttm->num_pages; ++i) {
+		from_page = read_mapping_page(swap_space, i, NULL);
+		if (IS_ERR(from_page))
+			goto out_err;
+		to_page = __ttm_tt_get_page(ttm, i);
+		if (unlikely(to_page == NULL))
+			goto out_err;
+
+		preempt_disable();
+		from_virtual = kmap_atomic(from_page, KM_USER0);
+		to_virtual = kmap_atomic(to_page, KM_USER1);
+		memcpy(to_virtual, from_virtual, PAGE_SIZE);
+		kunmap_atomic(to_virtual, KM_USER1);
+		kunmap_atomic(from_virtual, KM_USER0);
+		preempt_enable();
+		page_cache_release(from_page);
+	}
+
+	if (!(ttm->page_flags & TTM_PAGE_FLAG_PERSISTANT_SWAP))
+		fput(swap_storage);
+	ttm->swap_storage = NULL;
+	ttm->page_flags &= ~TTM_PAGE_FLAG_SWAPPED;
+
+	return 0;
+out_err:
+	ttm_tt_free_alloced_pages(ttm);
+	return -ENOMEM;
+}
+
+int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistant_swap_storage)
+{
+	struct address_space *swap_space;
+	struct file *swap_storage;
+	struct page *from_page;
+	struct page *to_page;
+	void *from_virtual;
+	void *to_virtual;
+	int i;
+
+	BUG_ON(ttm->state != tt_unbound && ttm->state != tt_unpopulated);
+	BUG_ON(ttm->caching_state != tt_cached);
+
+	/*
+	 * For user buffers, just unpin the pages, as there should be
+	 * vma references.
+	 */
+
+	if (ttm->page_flags & TTM_PAGE_FLAG_USER) {
+		ttm_tt_free_user_pages(ttm);
+		ttm->page_flags |= TTM_PAGE_FLAG_SWAPPED;
+		ttm->swap_storage = NULL;
+		return 0;
+	}
+
+	if (!persistant_swap_storage) {
+		swap_storage = shmem_file_setup("ttm swap",
+						ttm->num_pages << PAGE_SHIFT,
+						0);
+		if (unlikely(IS_ERR(swap_storage))) {
+			printk(KERN_ERR "Failed allocating swap storage.\n");
+			return -ENOMEM;
+		}
+	} else
+		swap_storage = persistant_swap_storage;
+
+	swap_space = swap_storage->f_path.dentry->d_inode->i_mapping;
+
+	for (i = 0; i < ttm->num_pages; ++i) {
+		from_page = ttm->pages[i];
+		if (unlikely(from_page == NULL))
+			continue;
+		to_page = read_mapping_page(swap_space, i, NULL);
+		if (unlikely(to_page == NULL))
+			goto out_err;
+
+		preempt_disable();
+		from_virtual = kmap_atomic(from_page, KM_USER0);
+		to_virtual = kmap_atomic(to_page, KM_USER1);
+		memcpy(to_virtual, from_virtual, PAGE_SIZE);
+		kunmap_atomic(to_virtual, KM_USER1);
+		kunmap_atomic(from_virtual, KM_USER0);
+		preempt_enable();
+		set_page_dirty(to_page);
+		mark_page_accessed(to_page);
+		page_cache_release(to_page);
+	}
+
+	ttm_tt_free_alloced_pages(ttm);
+	ttm->swap_storage = swap_storage;
+	ttm->page_flags |= TTM_PAGE_FLAG_SWAPPED;
+	if (persistant_swap_storage)
+		ttm->page_flags |= TTM_PAGE_FLAG_PERSISTANT_SWAP;
+
+	return 0;
+out_err:
+	if (!persistant_swap_storage)
+		fput(swap_storage);
+
+	return -ENOMEM;
+}
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 7e67dcb3d4f..7831a0318d3 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -116,9 +116,16 @@ config HID_CYPRESS
 	---help---
 	Support for cypress mouse and barcode readers.
 
-config DRAGONRISE_FF
-	tristate "DragonRise Inc. force feedback support"
+config HID_DRAGONRISE
+	tristate "DragonRise Inc. support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Say Y here if you have DragonRise Inc.game controllers.
+
+config DRAGONRISE_FF
+	bool "DragonRise Inc. force feedback support"
+	depends on HID_DRAGONRISE
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you want to enable force feedback support for DragonRise Inc.
@@ -160,7 +167,7 @@ config HID_LOGITECH
 	Support for Logitech devices that are not fully compliant with HID standard.
 
 config LOGITECH_FF
-	bool "Logitech force feedback"
+	bool "Logitech force feedback support"
 	depends on HID_LOGITECH
 	select INPUT_FF_MEMLESS
 	help
@@ -176,7 +183,7 @@ config LOGITECH_FF
 	  force feedback.
 
 config LOGIRUMBLEPAD2_FF
-	bool "Logitech Rumblepad 2 force feedback"
+	bool "Logitech Rumblepad 2 force feedback support"
 	depends on HID_LOGITECH
 	select INPUT_FF_MEMLESS
 	help
@@ -211,11 +218,19 @@ config HID_PANTHERLORD
 	---help---
 	Support for PantherLord/GreenAsia based device support.
 
+config HID_PANTHERLORD
+	tristate "Pantherlord support" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a PantherLord/GreenAsia based game controller
+	  or adapter.
+
 config PANTHERLORD_FF
 	bool "Pantherlord force feedback support"
 	depends on HID_PANTHERLORD
 	select INPUT_FF_MEMLESS
-	help
+	---help---
 	  Say Y here if you have a PantherLord/GreenAsia based game controller
 	  or adapter and want to enable force feedback support for it.
 
@@ -247,15 +262,38 @@ config HID_SUNPLUS
 	---help---
 	Support for Sunplus wireless desktop.
 
-config GREENASIA_FF
-	tristate "GreenAsia (Product ID 0x12) force feedback support"
+config HID_GREENASIA
+	tristate "GreenAsia (Product ID 0x12) support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a GreenAsia (Product ID 0x12) based game
+	  controller or adapter.
+
+config GREENASIA_FF
+	bool "GreenAsia (Product ID 0x12) force feedback support"
+	depends on HID_GREENASIA
 	select INPUT_FF_MEMLESS
 	---help---
 	Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
 	(like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
 	and want to enable force feedback support for it.
 
+config HID_SMARTJOYPLUS
+	tristate "SmartJoy PLUS PS2/USB adapter support" if EMBEDDED
+	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	Support for SmartJoy PLUS PS2/USB adapter.
+
+config SMARTJOYPLUS_FF
+	bool "SmartJoy PLUS PS2/USB adapter force feedback support"
+	depends on HID_SMARTJOYPLUS
+	select INPUT_FF_MEMLESS
+	---help---
+	Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
+	enable force feedback support for it.
+
 config HID_TOPSEED
 	tristate "TopSeed Cyberlink remote control support" if EMBEDDED
 	depends on USB_HID
@@ -263,21 +301,45 @@ config HID_TOPSEED
 	---help---
 	Say Y if you have a TopSeed Cyberlink remote control.
 
-config THRUSTMASTER_FF
-	tristate "ThrustMaster devices support"
+config HID_THRUSTMASTER
+	tristate "ThrustMaster devices support" if EMBEDDED
 	depends on USB_HID
+	default !EMBEDDED
+	---help---
+	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
+	  a THRUSTMASTER Ferrari GT Rumble Wheel.
+
+config THRUSTMASTER_FF
+	bool "ThrustMaster devices force feedback support"
+	depends on HID_THRUSTMASTER
 	select INPUT_FF_MEMLESS
-	help
+	---help---
 	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
-	  a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel.
+	  a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel and
+	  want to enable force feedback support for it.
 
-config ZEROPLUS_FF
-	tristate "Zeroplus based game controller support"
+config HID_WACOM
+	tristate "Wacom Bluetooth devices support" if EMBEDDED
+	depends on BT_HIDP
+	default !EMBEDDED
+	---help---
+	Support for Wacom Graphire Bluetooth tablet.
+
+config HID_ZEROPLUS
+	tristate "Zeroplus based game controller support" if EMBEDDED
 	depends on USB_HID
-	select INPUT_FF_MEMLESS
-	help
+	default !EMBEDDED
+	---help---
 	  Say Y here if you have a Zeroplus based game controller.
 
+config ZEROPLUS_FF
+	bool "Zeroplus based game controller force feedback support"
+	depends on HID_ZEROPLUS
+	select INPUT_FF_MEMLESS
+	---help---
+	  Say Y here if you have a Zeroplus based game controller and want
+	  to have force feedback support for it.
+
 endmenu
 
 endif # HID_SUPPORT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 1f7cb0fd450..db35151673b 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
-obj-$(CONFIG_DRAGONRISE_FF)	+= hid-drff.o
+obj-$(CONFIG_HID_DRAGONRISE)	+= hid-drff.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
@@ -34,12 +34,14 @@ obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
 obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
 obj-$(CONFIG_HID_PETALYNX)	+= hid-petalynx.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
+obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
 obj-$(CONFIG_HID_SONY)		+= hid-sony.o
 obj-$(CONFIG_HID_SUNPLUS)	+= hid-sunplus.o
-obj-$(CONFIG_GREENASIA_FF)	+= hid-gaff.o
-obj-$(CONFIG_THRUSTMASTER_FF)	+= hid-tmff.o
+obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
+obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
-obj-$(CONFIG_ZEROPLUS_FF)	+= hid-zpff.o
+obj-$(CONFIG_HID_ZEROPLUS)	+= hid-zpff.o
+obj-$(CONFIG_HID_WACOM)		+= hid-wacom.o
 
 obj-$(CONFIG_USB_HID)		+= usbhid/
 obj-$(CONFIG_USB_MOUSE)		+= usbhid/
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index acbce5745b0..303ccce05bb 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -436,10 +436,6 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 
-	/* Apple wireless Mighty Mouse */
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c),
-		.driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
-
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, apple_devices);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8551693d645..f2c21d5d24e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1312,6 +1312,8 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 47ac1a7d66e..04359ed64b8 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -137,6 +137,14 @@ static const struct hid_usage_entry hid_usage_table[] = {
     {0, 0x44, "BarrelSwitch"},
     {0, 0x45, "Eraser"},
     {0, 0x46, "TabletPick"},
+    {0, 0x47, "Confidence"},
+    {0, 0x48, "Width"},
+    {0, 0x49, "Height"},
+    {0, 0x51, "ContactID"},
+    {0, 0x52, "InputMode"},
+    {0, 0x53, "DeviceIndex"},
+    {0, 0x54, "ContactCount"},
+    {0, 0x55, "ContactMaximumNumber"},
   { 15, 0, "PhysicalInterfaceDevice" },
     {0, 0x00, "Undefined"},
     {0, 0x01, "Physical_Interface_Device"},
@@ -514,9 +522,11 @@ static const char *events[EV_MAX + 1] = {
 	[EV_FF_STATUS] = "ForceFeedbackStatus",
 };
 
-static const char *syncs[2] = {
+static const char *syncs[3] = {
 	[SYN_REPORT] = "Report",		[SYN_CONFIG] = "Config",
+	[SYN_MT_REPORT] = "MT Report",
 };
+
 static const char *keys[KEY_MAX + 1] = {
 	[KEY_RESERVED] = "Reserved",		[KEY_ESC] = "Esc",
 	[KEY_1] = "1",				[KEY_2] = "2",
@@ -734,8 +744,17 @@ static const char *absolutes[ABS_MAX + 1] = {
 	[ABS_HAT2Y] = "Hat2Y",		[ABS_HAT3X] = "Hat3X",
 	[ABS_HAT3Y] = "Hat 3Y",		[ABS_PRESSURE] = "Pressure",
 	[ABS_DISTANCE] = "Distance",	[ABS_TILT_X] = "XTilt",
-	[ABS_TILT_Y] = "YTilt",		[ABS_TOOL_WIDTH] = "Tool Width",
+	[ABS_TILT_Y] = "YTilt",		[ABS_TOOL_WIDTH] = "ToolWidth",
 	[ABS_VOLUME] = "Volume",	[ABS_MISC] = "Misc",
+	[ABS_MT_TOUCH_MAJOR] = "MTMajor",
+	[ABS_MT_TOUCH_MINOR] = "MTMinor",
+	[ABS_MT_WIDTH_MAJOR] = "MTMajorW",
+	[ABS_MT_WIDTH_MINOR] = "MTMinorW",
+	[ABS_MT_ORIENTATION] = "MTOrientation",
+	[ABS_MT_POSITION_X] = "MTPositionX",
+	[ABS_MT_POSITION_Y] = "MTPositionY",
+	[ABS_MT_TOOL_TYPE] = "MTToolType",
+	[ABS_MT_BLOB_ID] = "MTBlobID",
 };
 
 static const char *misc[MSC_MAX + 1] = {
diff --git a/drivers/hid/hid-drff.c b/drivers/hid/hid-drff.c
index 34f3eb65100..a239d20ad7a 100644
--- a/drivers/hid/hid-drff.c
+++ b/drivers/hid/hid-drff.c
@@ -32,6 +32,8 @@
 #include <linux/hid.h>
 
 #include "hid-ids.h"
+
+#ifdef CONFIG_DRAGONRISE_FF
 #include "usbhid/usbhid.h"
 
 struct drff_device {
@@ -135,6 +137,12 @@ static int drff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int drff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
 
 static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-gaff.c b/drivers/hid/hid-gaff.c
index 510ad3ab8d3..8a11ccddaf2 100644
--- a/drivers/hid/hid-gaff.c
+++ b/drivers/hid/hid-gaff.c
@@ -31,6 +31,8 @@
 #include <linux/usb.h>
 #include <linux/hid.h>
 #include "hid-ids.h"
+
+#ifdef CONFIG_GREENASIA_FF
 #include "usbhid/usbhid.h"
 
 struct gaff_device {
@@ -130,6 +132,12 @@ static int gaff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int gaff_init(struct hid_device *hdev)
+{
+	return 0;
+}
+#endif
 
 static int ga_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4d5ee2bbc62..63010103792 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -414,8 +414,10 @@
 #define USB_DEVICE_ID_VERNIER_LCSPEC	0x0006
 
 #define USB_VENDOR_ID_WACOM		0x056a
+#define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH	0x81
 
 #define USB_VENDOR_ID_WISEGROUP		0x0925
+#define USB_DEVICE_ID_SMARTJOY_PLUS	0x0005
 #define USB_DEVICE_ID_1_PHIDGETSERVO_20	0x8101
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
 #define USB_DEVICE_ID_8_8_4_IF_KIT	0x8201
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index 51aff08e10c..56099709581 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -50,6 +50,12 @@ static const signed short ff_joystick[] = {
 	-1
 };
 
+static const signed short ff_joystick_ac[] = {
+	FF_CONSTANT,
+	FF_AUTOCENTER,
+	-1
+};
+
 static const signed short ff_wheel[] = {
 	FF_CONSTANT,
 	FF_AUTOCENTER,
@@ -60,8 +66,8 @@ static const struct dev_type devices[] = {
 	{ 0x046d, 0xc211, ff_rumble },
 	{ 0x046d, 0xc219, ff_rumble },
 	{ 0x046d, 0xc283, ff_joystick },
-	{ 0x046d, 0xc286, ff_joystick },
-	{ 0x046d, 0xc294, ff_joystick },
+	{ 0x046d, 0xc286, ff_joystick_ac },
+	{ 0x046d, 0xc294, ff_wheel },
 	{ 0x046d, 0xc295, ff_joystick },
 	{ 0x046d, 0xca03, ff_wheel },
 };
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index c5b252be9c2..75ed9d2c1a3 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -1,13 +1,8 @@
 /*
- *  HID driver for some ntrig "special" devices
+ *  HID driver for N-Trig touchscreens
  *
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
- *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
- *  Copyright (c) 2007 Paul Walmsley
- *  Copyright (c) 2008 Jiri Slaby
  *  Copyright (c) 2008 Rafi Rubin
+ *  Copyright (c) 2009 Stephane Chatty
  *
  */
 
@@ -29,15 +24,79 @@
 #define nt_map_key_clear(c)	hid_map_usage_clear(hi, usage, bit, max, \
 					EV_KEY, (c))
 
+struct ntrig_data {
+	__s32 x, y, id, w, h;
+	char reading_a_point, found_contact_id;
+};
+
+/*
+ * this driver is aimed at two firmware versions in circulation:
+ *  - dual pen/finger single touch
+ *  - finger multitouch, pen not working
+ */
+
 static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
-	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_DIGITIZER &&
-			(usage->hid & 0xff) == 0x47) {
-		nt_map_key_clear(BTN_TOOL_DOUBLETAP);
-		return 1;
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			input_set_abs_params(hi->input, ABS_X,
+					field->logical_minimum,
+					field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			input_set_abs_params(hi->input, ABS_Y,
+					field->logical_minimum,
+					field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		/* we do not want to map these for now */
+		case HID_DG_INVERT: /* value is always 0 */
+		case HID_DG_ERASER: /* value is always 0 */
+		case HID_DG_CONTACTID: /* value is useless */
+		case HID_DG_BARRELSWITCH:  /* doubtful */
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+			return -1;
+
+		/* original mapping by Rafi Rubin */
+		case HID_DG_CONFIDENCE:
+			nt_map_key_clear(BTN_TOOL_DOUBLETAP);
+			return 1;
+
+		/* width/height mapped on TouchMajor/TouchMinor/Orientation */
+		case HID_DG_WIDTH:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MAJOR);
+			return 1;
+		case HID_DG_HEIGHT:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MINOR);
+			input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+					0, 1, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case 0xff000000:
+		/* we do not want to map these: no input-oriented meaning */
+		return -1;
 	}
+
 	return 0;
 }
 
@@ -51,6 +110,138 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 
 	return 0;
 }
+
+/*
+ * this function is called upon all reports
+ * so that we can filter contact point information,
+ * decide whether we are in multi or single touch mode
+ * and call input_mt_sync after each point if necessary
+ */
+static int ntrig_event (struct hid_device *hid, struct hid_field *field,
+		                        struct hid_usage *usage, __s32 value)
+{
+	struct input_dev *input = field->hidinput->input;
+	struct ntrig_data *nd = hid_get_drvdata(hid);
+
+        if (hid->claimed & HID_CLAIMED_INPUT) {
+		switch (usage->hid) {
+		case HID_GD_X:
+			nd->x = value;
+			nd->reading_a_point = 1;
+			break;
+		case HID_GD_Y:
+			nd->y = value;
+			break;
+		case HID_DG_CONTACTID:
+			nd->id = value;
+			/* we receive this only when in multitouch mode */
+			nd->found_contact_id = 1;
+			break;
+		case HID_DG_WIDTH:
+			nd->w = value;
+			break;
+		case HID_DG_HEIGHT:
+			nd->h = value;
+			/*
+			 * when in single touch mode, this is the last
+			 * report received in a finger event. We want
+			 * to emit a normal (X, Y) position
+			 */
+			if (! nd->found_contact_id) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+			}
+			break;
+		case HID_DG_TIPPRESSURE:
+			/*
+			 * when in single touch mode, this is the last
+			 * report received in a pen event. We want
+			 * to emit a normal (X, Y) position
+			 */
+			if (! nd->found_contact_id) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+				input_event(input, EV_ABS, ABS_PRESSURE, value);
+			}
+			break;
+		case 0xff000002:
+			/*
+			 * we receive this when the device is in multitouch
+			 * mode. The first of the three values tagged with
+			 * this usage tells if the contact point is real
+			 * or a placeholder
+			 */
+			if (!nd->reading_a_point || value != 1)
+				break;
+			/* emit a normal (X, Y) for the first point only */
+			if (nd->id == 0) {
+				input_event(input, EV_ABS, ABS_X, nd->x);
+				input_event(input, EV_ABS, ABS_Y, nd->y);
+			}
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y);
+			if (nd->w > nd->h) {
+				input_event(input, EV_ABS,
+						ABS_MT_ORIENTATION, 1);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MAJOR, nd->w);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MINOR, nd->h);
+			} else {
+				input_event(input, EV_ABS,
+						ABS_MT_ORIENTATION, 0);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MAJOR, nd->h);
+				input_event(input, EV_ABS,
+						ABS_MT_TOUCH_MINOR, nd->w);
+			}
+			input_mt_sync(field->hidinput->input);
+			nd->reading_a_point = 0;
+			nd->found_contact_id = 0;
+			break;
+
+		default:
+			/* fallback to the generic hidinput handling */
+			return 0;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+        if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+                hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct ntrig_data *nd;
+
+	nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
+	if (!nd) {
+		dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
+		return -ENOMEM;
+	}
+	nd->reading_a_point = 0;
+	nd->found_contact_id = 0;
+	hid_set_drvdata(hdev, nd);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree (nd);
+	return ret;
+}
+
+static void ntrig_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
 static const struct hid_device_id ntrig_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN),
 		.driver_data = NTRIG_DUPLICATE_USAGES },
@@ -58,11 +249,20 @@ static const struct hid_device_id ntrig_devices[] = {
 };
 MODULE_DEVICE_TABLE(hid, ntrig_devices);
 
+static const struct hid_usage_id ntrig_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
 static struct hid_driver ntrig_driver = {
 	.name = "ntrig",
 	.id_table = ntrig_devices,
+	.probe = ntrig_probe,
+	.remove = ntrig_remove,
 	.input_mapping = ntrig_input_mapping,
 	.input_mapped = ntrig_input_mapped,
+	.usage_table = ntrig_grabbed_usages,
+	.event = ntrig_event,
 };
 
 static int ntrig_init(void)
diff --git a/drivers/hid/hid-sjoy.c b/drivers/hid/hid-sjoy.c
new file mode 100644
index 00000000000..eab169e5c37
--- /dev/null
+++ b/drivers/hid/hid-sjoy.c
@@ -0,0 +1,180 @@
+/*
+ *  Force feedback support for SmartJoy PLUS PS2->USB adapter
+ *
+ *  Copyright (c) 2009 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ *  Based of hid-pl.c and hid-gaff.c
+ *   Copyright (c) 2007, 2009 Anssi Hannula <anssi.hannula@gmail.com>
+ *   Copyright (c) 2008 Lukasz Lubojanski <lukasz@lubojanski.info>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include "hid-ids.h"
+
+#ifdef CONFIG_SMARTJOYPLUS_FF
+#include "usbhid/usbhid.h"
+
+struct sjoyff_device {
+	struct hid_report *report;
+};
+
+static int hid_sjoyff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct sjoyff_device *sjoyff = data;
+	u32 left, right;
+
+	left = effect->u.rumble.strong_magnitude;
+	right = effect->u.rumble.weak_magnitude;
+	dev_dbg(&dev->dev, "called with 0x%08x 0x%08x\n", left, right);
+
+	left = left * 0xff / 0xffff;
+	right = (right != 0); /* on/off only */
+
+	sjoyff->report->field[0]->value[1] = right;
+	sjoyff->report->field[0]->value[2] = left;
+	dev_dbg(&dev->dev, "running with 0x%02x 0x%02x\n", left, right);
+	usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
+
+	return 0;
+}
+
+static int sjoyff_init(struct hid_device *hid)
+{
+	struct sjoyff_device *sjoyff;
+	struct hid_report *report;
+	struct hid_input *hidinput = list_entry(hid->inputs.next,
+						struct hid_input, list);
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct list_head *report_ptr = report_list;
+	struct input_dev *dev;
+	int error;
+
+	if (list_empty(report_list)) {
+		dev_err(&hid->dev, "no output reports found\n");
+		return -ENODEV;
+	}
+
+	report_ptr = report_ptr->next;
+
+	if (report_ptr == report_list) {
+		dev_err(&hid->dev, "required output report is "
+				"missing\n");
+		return -ENODEV;
+	}
+
+	report = list_entry(report_ptr, struct hid_report, list);
+	if (report->maxfield < 1) {
+		dev_err(&hid->dev, "no fields in the report\n");
+		return -ENODEV;
+	}
+
+	if (report->field[0]->report_count < 3) {
+		dev_err(&hid->dev, "not enough values in the field\n");
+		return -ENODEV;
+	}
+
+	sjoyff = kzalloc(sizeof(struct sjoyff_device), GFP_KERNEL);
+	if (!sjoyff)
+		return -ENOMEM;
+
+	dev = hidinput->input;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, sjoyff, hid_sjoyff_play);
+	if (error) {
+		kfree(sjoyff);
+		return error;
+	}
+
+	sjoyff->report = report;
+	sjoyff->report->field[0]->value[0] = 0x01;
+	sjoyff->report->field[0]->value[1] = 0x00;
+	sjoyff->report->field[0]->value[2] = 0x00;
+	usbhid_submit_report(hid, sjoyff->report, USB_DIR_OUT);
+
+	dev_info(&hid->dev,
+		"Force feedback for SmartJoy PLUS PS2/USB adapter\n");
+
+	return 0;
+}
+#else
+static inline int sjoyff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
+
+static int sjoy_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err;
+	}
+
+	sjoyff_init(hdev);
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct hid_device_id sjoy_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, sjoy_devices);
+
+static struct hid_driver sjoy_driver = {
+	.name = "smartjoyplus",
+	.id_table = sjoy_devices,
+	.probe = sjoy_probe,
+};
+
+static int sjoy_init(void)
+{
+	return hid_register_driver(&sjoy_driver);
+}
+
+static void sjoy_exit(void)
+{
+	hid_unregister_driver(&sjoy_driver);
+}
+
+module_init(sjoy_init);
+module_exit(sjoy_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jussi Kivilinna");
+
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 7c1f7b50330..fcd6ccd02fe 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -33,11 +33,6 @@
 
 #include "hid-ids.h"
 
-#include "usbhid/usbhid.h"
-
-/* Usages for thrustmaster devices I know about */
-#define THRUSTMASTER_USAGE_FF	(HID_UP_GENDESK | 0xbb)
-
 static const signed short ff_rumble[] = {
 	FF_RUMBLE,
 	-1
@@ -48,6 +43,12 @@ static const signed short ff_joystick[] = {
 	-1
 };
 
+#ifdef CONFIG_THRUSTMASTER_FF
+#include "usbhid/usbhid.h"
+
+/* Usages for thrustmaster devices I know about */
+#define THRUSTMASTER_USAGE_FF	(HID_UP_GENDESK | 0xbb)
+
 struct tmff_device {
 	struct hid_report *report;
 	struct hid_field *ff_field;
@@ -209,6 +210,12 @@ fail:
 	kfree(tmff);
 	return error;
 }
+#else
+static inline int tmff_init(struct hid_device *hid, const signed short *ff_bits)
+{
+	return 0;
+}
+#endif
 
 static int tm_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
new file mode 100644
index 00000000000..1f9237f511e
--- /dev/null
+++ b/drivers/hid/hid-wacom.c
@@ -0,0 +1,259 @@
+/*
+ *  Bluetooth Wacom Tablet support
+ *
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2007 Paul Walmsley
+ *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
+ *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
+ *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+struct wacom_data {
+	__u16 tool;
+	unsigned char butstate;
+};
+
+static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
+		u8 *raw_data, int size)
+{
+	struct wacom_data *wdata = hid_get_drvdata(hdev);
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	unsigned char *data = (unsigned char *) raw_data;
+	int tool, x, y, rw;
+
+	if (!(hdev->claimed & HID_CLAIMED_INPUT))
+		return 0;
+
+	tool = 0;
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Check if this is a tablet report */
+	if (data[0] != 0x03)
+		return 0;
+
+	/* Get X & Y positions */
+	x = le16_to_cpu(*(__le16 *) &data[2]);
+	y = le16_to_cpu(*(__le16 *) &data[4]);
+
+	/* Get current tool identifier */
+	if (data[1] & 0x90) { /* If pen is in the in/active area */
+		switch ((data[1] >> 5) & 3) {
+		case 0:	/* Pen */
+			tool = BTN_TOOL_PEN;
+			break;
+
+		case 1: /* Rubber */
+			tool = BTN_TOOL_RUBBER;
+			break;
+
+		case 2: /* Mouse with wheel */
+		case 3: /* Mouse without wheel */
+			tool = BTN_TOOL_MOUSE;
+			break;
+		}
+
+		/* Reset tool if out of active tablet area */
+		if (!(data[1] & 0x10))
+			tool = 0;
+	}
+
+	/* If tool changed, notify input subsystem */
+	if (wdata->tool != tool) {
+		if (wdata->tool) {
+			/* Completely reset old tool state */
+			if (wdata->tool == BTN_TOOL_MOUSE) {
+				input_report_key(input, BTN_LEFT, 0);
+				input_report_key(input, BTN_RIGHT, 0);
+				input_report_key(input, BTN_MIDDLE, 0);
+				input_report_abs(input, ABS_DISTANCE,
+						input->absmax[ABS_DISTANCE]);
+			} else {
+				input_report_key(input, BTN_TOUCH, 0);
+				input_report_key(input, BTN_STYLUS, 0);
+				input_report_key(input, BTN_STYLUS2, 0);
+				input_report_abs(input, ABS_PRESSURE, 0);
+			}
+			input_report_key(input, wdata->tool, 0);
+			input_sync(input);
+		}
+		wdata->tool = tool;
+		if (tool)
+			input_report_key(input, tool, 1);
+	}
+
+	if (tool) {
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+
+		switch ((data[1] >> 5) & 3) {
+		case 2: /* Mouse with wheel */
+			input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
+			rw = (data[6] & 0x01) ? -1 :
+				(data[6] & 0x02) ? 1 : 0;
+			input_report_rel(input, REL_WHEEL, rw);
+			/* fall through */
+
+		case 3: /* Mouse without wheel */
+			input_report_key(input, BTN_LEFT, data[1] & 0x01);
+			input_report_key(input, BTN_RIGHT, data[1] & 0x02);
+			/* Compute distance between mouse and tablet */
+			rw = 44 - (data[6] >> 2);
+			if (rw < 0)
+				rw = 0;
+			else if (rw > 31)
+				rw = 31;
+			input_report_abs(input, ABS_DISTANCE, rw);
+			break;
+
+		default:
+			input_report_abs(input, ABS_PRESSURE,
+					data[6] | (((__u16) (data[1] & 0x08)) << 5));
+			input_report_key(input, BTN_TOUCH, data[1] & 0x01);
+			input_report_key(input, BTN_STYLUS, data[1] & 0x02);
+			input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04);
+			break;
+		}
+
+		input_sync(input);
+	}
+
+	/* Report the state of the two buttons at the top of the tablet
+	 * as two extra fingerpad keys (buttons 4 & 5). */
+	rw = data[7] & 0x03;
+	if (rw != wdata->butstate) {
+		wdata->butstate = rw;
+		input_report_key(input, BTN_0, rw & 0x02);
+		input_report_key(input, BTN_1, rw & 0x01);
+		input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
+		input_sync(input);
+	}
+
+	return 1;
+}
+
+static int wacom_probe(struct hid_device *hdev,
+		const struct hid_device_id *id)
+{
+	struct hid_input *hidinput;
+	struct input_dev *input;
+	struct wacom_data *wdata;
+	int ret;
+
+	wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
+	if (wdata == NULL) {
+		dev_err(&hdev->dev, "can't alloc wacom descriptor\n");
+		return -ENOMEM;
+	}
+
+	hid_set_drvdata(hdev, wdata);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err_free;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err_free;
+	}
+
+	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
+	input = hidinput->input;
+
+	/* Basics */
+	input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
+	input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) |
+		BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE);
+	input->relbit[0] |= BIT(REL_WHEEL);
+	set_bit(BTN_TOOL_PEN, input->keybit);
+	set_bit(BTN_TOUCH, input->keybit);
+	set_bit(BTN_STYLUS, input->keybit);
+	set_bit(BTN_STYLUS2, input->keybit);
+	set_bit(BTN_LEFT, input->keybit);
+	set_bit(BTN_RIGHT, input->keybit);
+	set_bit(BTN_MIDDLE, input->keybit);
+
+	/* Pad */
+	input->evbit[0] |= BIT(EV_MSC);
+	input->mscbit[0] |= BIT(MSC_SERIAL);
+
+	/* Distance, rubber and mouse */
+	input->absbit[0] |= BIT(ABS_DISTANCE);
+	set_bit(BTN_TOOL_RUBBER, input->keybit);
+	set_bit(BTN_TOOL_MOUSE, input->keybit);
+
+	input->absmax[ABS_PRESSURE] = 511;
+	input->absmax[ABS_DISTANCE] = 32;
+
+	input->absmax[ABS_X] = 16704;
+	input->absmax[ABS_Y] = 12064;
+	input->absfuzz[ABS_X] = 4;
+	input->absfuzz[ABS_Y] = 4;
+
+	return 0;
+err_free:
+	kfree(wdata);
+	return ret;
+}
+
+static void wacom_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
+static const struct hid_device_id wacom_devices[] = {
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
+
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, wacom_devices);
+
+static struct hid_driver wacom_driver = {
+	.name = "wacom",
+	.id_table = wacom_devices,
+	.probe = wacom_probe,
+	.remove = wacom_remove,
+	.raw_event = wacom_raw_event,
+};
+
+static int wacom_init(void)
+{
+	int ret;
+
+	ret = hid_register_driver(&wacom_driver);
+	if (ret)
+		printk(KERN_ERR "can't register wacom driver\n");
+	printk(KERN_ERR "wacom driver registered\n");
+	return ret;
+}
+
+static void wacom_exit(void)
+{
+	hid_unregister_driver(&wacom_driver);
+}
+
+module_init(wacom_init);
+module_exit(wacom_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/hid/hid-zpff.c b/drivers/hid/hid-zpff.c
index 85a198a1853..57f710757bf 100644
--- a/drivers/hid/hid-zpff.c
+++ b/drivers/hid/hid-zpff.c
@@ -27,6 +27,7 @@
 
 #include "hid-ids.h"
 
+#ifdef CONFIG_ZEROPLUS_FF
 #include "usbhid/usbhid.h"
 
 struct zpff_device {
@@ -108,6 +109,12 @@ static int zpff_init(struct hid_device *hid)
 
 	return 0;
 }
+#else
+static inline int zpff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
 
 static int zp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 00ccf4b1985..0c6639ea03d 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -349,10 +349,7 @@ int hidraw_connect(struct hid_device *hid)
 	int minor, result;
 	struct hidraw *dev;
 
-	/* TODO currently we accept any HID device. This should later
-	 * probably be fixed to accept only those devices which provide
-	 * non-input applications
-	 */
+	/* we accept any HID device, no matter the applications */
 
 	dev = kzalloc(sizeof(struct hidraw), GFP_KERNEL);
 	if (!dev)
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index ac8049b5f1e..76c4bbe9dcc 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1234,12 +1234,11 @@ static int hid_post_reset(struct usb_interface *intf)
 	struct hid_device *hid = usb_get_intfdata(intf);
 	struct usbhid_device *usbhid = hid->driver_data;
 	int status;
- 
+
 	spin_lock_irq(&usbhid->lock);
 	clear_bit(HID_RESET_PENDING, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->lock);
 	hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0);
-	/* FIXME: Any more reinitialization needed? */
 	status = hid_start_in(hid);
 	if (status < 0)
 		hid_io_error(hid);
@@ -1251,14 +1250,14 @@ static int hid_post_reset(struct usb_interface *intf)
 int usbhid_get_power(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
- 
+
 	return usb_autopm_get_interface(usbhid->intf);
 }
 
 void usbhid_put_power(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
- 
+
 	usb_autopm_put_interface(usbhid->intf);
 }
 
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index e9b436d2d94..9e9421525fb 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -850,8 +850,14 @@ static const struct file_operations hiddev_fops = {
 #endif
 };
 
+static char *hiddev_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
 static struct usb_class_driver hiddev_class = {
 	.name =		"hiddev%d",
+	.nodename =	hiddev_nodename,
 	.fops =		&hiddev_fops,
 	.minor_base =	HIDDEV_MINOR_BASE,
 };
@@ -955,7 +961,6 @@ static int hiddev_usbd_probe(struct usb_interface *intf,
 	return -ENODEV;
 }
 
-
 static /* const */ struct usb_driver hiddev_driver = {
 	.name =		"hiddev",
 	.probe =	hiddev_usbd_probe,
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d73f5f473e3..2d5016691d4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -306,11 +306,11 @@ config SENSORS_F71805F
 	  will be called f71805f.
 
 config SENSORS_F71882FG
-	tristate "Fintek F71862FG, F71882FG and F8000"
+	tristate "Fintek F71858FG, F71862FG, F71882FG and F8000"
 	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
-	  features of the Fintek F71882FG/F71883FG, F71862FG/71863FG
+	  features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG
 	  and F8000 Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
@@ -418,7 +418,7 @@ config SENSORS_IBMAEM
 	  power sensors and capping hardware in various IBM System X
 	  servers that support Active Energy Manager.  This includes
 	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
-	  and certain HS2x/LS2x/QS2x blades.
+	  and certain HC10/HS2x/LS2x/QS2x blades.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called ibmaem.
@@ -787,6 +787,16 @@ config SENSORS_THMC50
 	  This driver can also be built as a module.  If so, the module
 	  will be called thmc50.
 
+config SENSORS_TMP401
+	tristate "Texas Instruments TMP401 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for Texas Instruments TMP401 and
+	  TMP411 temperature sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tmp401.
+
 config SENSORS_VIA686A
 	tristate "VIA686A"
 	depends on PCI
@@ -940,6 +950,7 @@ config SENSORS_HDAPS
 config SENSORS_LIS3LV02D
 	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
 	depends on ACPI && INPUT
+	select INPUT_POLLDEV
 	select NEW_LEDS
 	select LEDS_CLASS
 	default n
@@ -967,6 +978,7 @@ config SENSORS_LIS3LV02D
 config SENSORS_LIS3_SPI
 	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
 	depends on !ACPI && SPI_MASTER && INPUT
+	select INPUT_POLLDEV
 	default n
 	help
 	  This driver provides support for the LIS3LV02Dx accelerometer connected
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 0ae26984ba4..b793dce6bed 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
+obj-$(CONFIG_SENSORS_TMP401)	+= tmp401.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
 obj-$(CONFIG_SENSORS_VT1211)	+= vt1211.o
 obj-$(CONFIG_SENSORS_VT8231)	+= vt8231.o
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 5f81ddf7150..4146105f1a5 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1,6 +1,6 @@
 /***************************************************************************
  *   Copyright (C) 2006 by Hans Edgington <hans@edgington.nl>              *
- *   Copyright (C) 2007,2008 by Hans de Goede <hdegoede@redhat.com>        *
+ *   Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com>           *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
@@ -32,6 +32,7 @@
 
 #define DRVNAME "f71882fg"
 
+#define SIO_F71858FG_LD_HWM	0x02	/* Hardware monitor logical device */
 #define SIO_F71882FG_LD_HWM	0x04	/* Hardware monitor logical device */
 #define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
 #define SIO_LOCK_KEY		0xAA	/* Key to diasble Super-I/O */
@@ -44,6 +45,7 @@
 #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
 
 #define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
+#define SIO_F71858_ID		0x0507  /* Chipset ID */
 #define SIO_F71862_ID		0x0601	/* Chipset ID */
 #define SIO_F71882_ID		0x0541	/* Chipset ID */
 #define SIO_F8000_ID		0x0581	/* Chipset ID */
@@ -70,6 +72,7 @@
 #define F71882FG_REG_TEMP_HIGH(nr)	(0x81 + 2 * (nr))
 #define F71882FG_REG_TEMP_STATUS	0x62
 #define F71882FG_REG_TEMP_BEEP		0x63
+#define F71882FG_REG_TEMP_CONFIG	0x69
 #define F71882FG_REG_TEMP_HYST(nr)	(0x6C + (nr))
 #define F71882FG_REG_TEMP_TYPE		0x6B
 #define F71882FG_REG_TEMP_DIODE_OPEN	0x6F
@@ -92,9 +95,10 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-enum chips { f71862fg, f71882fg, f8000 };
+enum chips { f71858fg, f71862fg, f71882fg, f8000 };
 
 static const char *f71882fg_names[] = {
+	"f71858fg",
 	"f71862fg",
 	"f71882fg",
 	"f8000",
@@ -119,6 +123,7 @@ struct f71882fg_data {
 	struct device *hwmon_dev;
 
 	struct mutex update_lock;
+	int temp_start;			/* temp numbering start (0 or 1) */
 	char valid;			/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 	unsigned long last_limits;	/* In jiffies */
@@ -136,7 +141,7 @@ struct f71882fg_data {
 	/* Note: all models have only 3 temperature channels, but on some
 	   they are addressed as 0-2 and on others as 1-3, so for coding
 	   convenience we reserve space for 4 channels */
-	u8	temp[4];
+	u16	temp[4];
 	u8	temp_ovt[4];
 	u8	temp_high[4];
 	u8	temp_hyst[2]; /* 2 hysts stored per reg */
@@ -144,6 +149,7 @@ struct f71882fg_data {
 	u8	temp_status;
 	u8	temp_beep;
 	u8	temp_diode_open;
+	u8	temp_config;
 	u8	pwm[4];
 	u8	pwm_enable;
 	u8	pwm_auto_point_hyst[2];
@@ -247,11 +253,55 @@ static struct platform_driver f71882fg_driver = {
 		.name	= DRVNAME,
 	},
 	.probe		= f71882fg_probe,
-	.remove		= __devexit_p(f71882fg_remove),
+	.remove		= f71882fg_remove,
 };
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
+/* Temp and in attr for the f71858fg */
+static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
+	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
+	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
+	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
+	SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 0),
+	SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 0),
+	SENSOR_ATTR_2(temp1_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 0),
+	SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 0),
+	SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 0),
+	SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
+	SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
+	SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 1),
+	SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 1),
+	SENSOR_ATTR_2(temp2_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 1),
+	SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 1),
+	SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
+	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
+	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
+	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
+		store_temp_max, 0, 2),
+	SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+		store_temp_max_hyst, 0, 2),
+	SENSOR_ATTR_2(temp3_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
+	SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+		store_temp_crit, 0, 2),
+	SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+		0, 2),
+	SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
+	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+};
+
 /* Temp and in attr common to both the f71862fg and f71882fg */
 static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
@@ -344,6 +394,7 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 0),
 	SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
+	SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
 	SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
 	SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_crit,
 		store_temp_crit, 0, 1),
@@ -351,12 +402,14 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
 		store_temp_max, 0, 1),
 	SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
 	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
+	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
 	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
 	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_crit,
 		store_temp_crit, 0, 2),
 	SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 2),
 	SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
+	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
 };
 
 /* Fan / PWM attr common to all models */
@@ -395,6 +448,9 @@ static struct sensor_device_attribute_2 fxxxx_fan_attr[] = {
 		      show_pwm_auto_point_channel,
 		      store_pwm_auto_point_channel, 0, 1),
 
+	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
+	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+		      store_pwm_enable, 0, 2),
 	SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
 		      show_pwm_interpolate, store_pwm_interpolate, 0, 2),
 	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
@@ -450,9 +506,6 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
 
-	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
-	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
-		      store_pwm_enable, 0, 2),
 	SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      1, 2),
@@ -473,22 +526,8 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
 };
 
-/* Fan / PWM attr for the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
-	SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 0),
-	SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 1),
-	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 2),
-	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
-	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
-		      show_fan_full_speed,
-		      store_fan_full_speed, 0, 3),
-	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
-		store_fan_beep, 0, 3),
-	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
-
+/* Fan / PWM attr common to both the f71882fg and f71858fg */
+static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 0),
@@ -565,9 +604,6 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
 	SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
 
-	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
-	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
-		      store_pwm_enable, 0, 2),
 	SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 2),
@@ -605,6 +641,24 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 2, 2),
 	SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
+};
+
+/* Fan / PWM attr found on the f71882fg but not on the f71858fg */
+static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
+	SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 0),
+	SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 1),
+	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 2),
+
+	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
+		      show_fan_full_speed,
+		      store_fan_full_speed, 0, 3),
+	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+		store_fan_beep, 0, 3),
+	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
 
 	SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
 	SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
@@ -659,8 +713,6 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
 static struct sensor_device_attribute_2 f8000_fan_attr[] = {
 	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
 
-	SENSOR_ATTR_2(pwm3, S_IRUGO, show_pwm, NULL, 0, 2),
-
 	SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
 		      0, 2),
@@ -857,13 +909,20 @@ static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val)
 	outb(val & 255, data->addr + DATA_REG_OFFSET);
 }
 
+static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
+{
+	if (data->type == f71858fg)
+		return f71882fg_read16(data, F71882FG_REG_TEMP(nr));
+	else
+		return f71882fg_read8(data, F71882FG_REG_TEMP(nr));
+}
+
 static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
 	int nr, reg = 0, reg2;
 	int nr_fans = (data->type == f71882fg) ? 4 : 3;
-	int nr_ins = (data->type == f8000) ? 3 : 9;
-	int temp_start = (data->type == f8000) ? 0 : 1;
+	int nr_ins = (data->type == f71858fg || data->type == f8000) ? 3 : 9;
 
 	mutex_lock(&data->update_lock);
 
@@ -878,7 +937,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 		}
 
 		/* Get High & boundary temps*/
-		for (nr = temp_start; nr < 3 + temp_start; nr++) {
+		for (nr = data->temp_start; nr < 3 + data->temp_start; nr++) {
 			data->temp_ovt[nr] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_OVT(nr));
 			data->temp_high[nr] = f71882fg_read8(data,
@@ -886,14 +945,17 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 		}
 
 		if (data->type != f8000) {
-			data->fan_beep = f71882fg_read8(data,
-						F71882FG_REG_FAN_BEEP);
-			data->temp_beep = f71882fg_read8(data,
-						F71882FG_REG_TEMP_BEEP);
 			data->temp_hyst[0] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_HYST(0));
 			data->temp_hyst[1] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_HYST(1));
+		}
+
+		if (data->type == f71862fg || data->type == f71882fg) {
+			data->fan_beep = f71882fg_read8(data,
+						F71882FG_REG_FAN_BEEP);
+			data->temp_beep = f71882fg_read8(data,
+						F71882FG_REG_TEMP_BEEP);
 			/* Have to hardcode type, because temp1 is special */
 			reg  = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
 			data->temp_type[2] = (reg & 0x04) ? 2 : 4;
@@ -904,10 +966,10 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 			data->temp_type[1] = 6 /* PECI */;
 		else if ((reg2 & 0x03) == 0x02)
 			data->temp_type[1] = 5 /* AMDSI */;
-		else if (data->type != f8000)
+		else if (data->type == f71862fg || data->type == f71882fg)
 			data->temp_type[1] = (reg & 0x02) ? 2 : 4;
 		else
-			data->temp_type[1] = 2; /* F8000 only supports BJT */
+			data->temp_type[1] = 2; /* Only supports BJT */
 
 		data->pwm_enable = f71882fg_read8(data,
 						  F71882FG_REG_PWM_ENABLE);
@@ -963,9 +1025,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 						F71882FG_REG_TEMP_STATUS);
 		data->temp_diode_open = f71882fg_read8(data,
 						F71882FG_REG_TEMP_DIODE_OPEN);
-		for (nr = temp_start; nr < 3 + temp_start; nr++)
-			data->temp[nr] = f71882fg_read8(data,
-						F71882FG_REG_TEMP(nr));
+		for (nr = data->temp_start; nr < 3 + data->temp_start; nr++)
+			data->temp[nr] = f71882fg_read_temp(data, nr);
 
 		data->fan_status = f71882fg_read8(data,
 						F71882FG_REG_FAN_STATUS);
@@ -1168,8 +1229,24 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 {
 	struct f71882fg_data *data = f71882fg_update_device(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
+	int sign, temp;
+
+	if (data->type == f71858fg) {
+		/* TEMP_TABLE_SEL 1 or 3 ? */
+		if (data->temp_config & 1) {
+			sign = data->temp[nr] & 0x0001;
+			temp = (data->temp[nr] >> 5) & 0x7ff;
+		} else {
+			sign = data->temp[nr] & 0x8000;
+			temp = (data->temp[nr] >> 5) & 0x3ff;
+		}
+		temp *= 125;
+		if (sign)
+			temp -= 128000;
+	} else
+		temp = data->temp[nr] * 1000;
 
-	return sprintf(buf, "%d\n", data->temp[nr] * 1000);
+	return sprintf(buf, "%d\n", temp);
 }
 
 static ssize_t show_temp_max(struct device *dev, struct device_attribute
@@ -1440,6 +1517,10 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
 	int nr = to_sensor_dev_attr_2(devattr)->index;
 	long val = simple_strtol(buf, NULL, 10);
 
+	/* Special case for F8000 pwm channel 3 which only does auto mode */
+	if (data->type == f8000 && nr == 2 && val != 2)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
 	data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
 	/* Special case for F8000 auto PWM mode / Thermostat mode */
@@ -1458,6 +1539,12 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
 	} else {
 		switch (val) {
 		case 1:
+			/* The f71858fg does not support manual RPM mode */
+			if (data->type == f71858fg &&
+			    ((data->pwm_enable >> (2 * nr)) & 1)) {
+				count = -EINVAL;
+				goto leave;
+			}
 			data->pwm_enable |= 2 << (2 * nr);
 			break;		/* Manual */
 		case 2:
@@ -1616,9 +1703,9 @@ static ssize_t show_pwm_auto_point_channel(struct device *dev,
 	int result;
 	struct f71882fg_data *data = f71882fg_update_device(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
-	int temp_start = (data->type == f8000) ? 0 : 1;
 
-	result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) - temp_start);
+	result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) -
+		       data->temp_start);
 
 	return sprintf(buf, "%d\n", result);
 }
@@ -1629,7 +1716,6 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
 	int nr = to_sensor_dev_attr_2(devattr)->index;
-	int temp_start = (data->type == f8000) ? 0 : 1;
 	long val = simple_strtol(buf, NULL, 10);
 
 	switch (val) {
@@ -1645,7 +1731,7 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
 	default:
 		return -EINVAL;
 	}
-	val += temp_start;
+	val += data->temp_start;
 	mutex_lock(&data->update_lock);
 	data->pwm_auto_point_mapping[nr] =
 		f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr));
@@ -1721,6 +1807,8 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
 	data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
 	data->type = sio_data->type;
+	data->temp_start =
+	    (data->type == f71858fg || data->type == f8000) ? 0 : 1;
 	mutex_init(&data->update_lock);
 	platform_set_drvdata(pdev, data);
 
@@ -1736,19 +1824,6 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		goto exit_free;
 	}
 
-	data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
-	/* If it is a 71862 and the fan / pwm part is enabled sanity check
-	   the pwm settings */
-	if (data->type == f71862fg && (start_reg & 0x02)) {
-		if ((data->pwm_enable & 0x15) != 0x15) {
-			dev_err(&pdev->dev,
-				"Invalid (reserved) pwm settings: 0x%02x\n",
-				(unsigned int)data->pwm_enable);
-			err = -ENODEV;
-			goto exit_free;
-		}
-	}
-
 	/* Register sysfs interface files */
 	err = device_create_file(&pdev->dev, &dev_attr_name);
 	if (err)
@@ -1756,6 +1831,20 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 
 	if (start_reg & 0x01) {
 		switch (data->type) {
+		case f71858fg:
+			data->temp_config =
+				f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG);
+			if (data->temp_config & 0x10)
+				/* The f71858fg temperature alarms behave as
+				   the f8000 alarms in this mode */
+				err = f71882fg_create_sysfs_files(pdev,
+					f8000_in_temp_attr,
+					ARRAY_SIZE(f8000_in_temp_attr));
+			else
+				err = f71882fg_create_sysfs_files(pdev,
+					f71858fg_in_temp_attr,
+					ARRAY_SIZE(f71858fg_in_temp_attr));
+			break;
 		case f71882fg:
 			err = f71882fg_create_sysfs_files(pdev,
 					f71882fg_in_temp_attr,
@@ -1779,6 +1868,35 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 	}
 
 	if (start_reg & 0x02) {
+		data->pwm_enable =
+			f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
+
+		/* Sanity check the pwm settings */
+		switch (data->type) {
+		case f71858fg:
+			err = 0;
+			for (i = 0; i < nr_fans; i++)
+				if (((data->pwm_enable >> (i * 2)) & 3) == 3)
+					err = 1;
+			break;
+		case f71862fg:
+			err = (data->pwm_enable & 0x15) != 0x15;
+			break;
+		case f71882fg:
+			err = 0;
+			break;
+		case f8000:
+			err = data->pwm_enable & 0x20;
+			break;
+		}
+		if (err) {
+			dev_err(&pdev->dev,
+				"Invalid (reserved) pwm settings: 0x%02x\n",
+				(unsigned int)data->pwm_enable);
+			err = -ENODEV;
+			goto exit_unregister_sysfs;
+		}
+
 		err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr,
 					ARRAY_SIZE(fxxxx_fan_attr));
 		if (err)
@@ -1794,6 +1912,13 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 			err = f71882fg_create_sysfs_files(pdev,
 					f71882fg_fan_attr,
 					ARRAY_SIZE(f71882fg_fan_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			/* fall through! */
+		case f71858fg:
+			err = f71882fg_create_sysfs_files(pdev,
+					f71882fg_f71858fg_fan_attr,
+					ARRAY_SIZE(f71882fg_f71858fg_fan_attr));
 			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
@@ -1878,6 +2003,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
 	switch (devid) {
+	case SIO_F71858_ID:
+		sio_data->type = f71858fg;
+		break;
 	case SIO_F71862_ID:
 		sio_data->type = f71862fg;
 		break;
@@ -1892,7 +2020,11 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 		goto exit;
 	}
 
-	superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+	if (sio_data->type == f71858fg)
+		superio_select(sioaddr, SIO_F71858FG_LD_HWM);
+	else
+		superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+
 	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
 		printk(KERN_WARNING DRVNAME ": Device not activated\n");
 		goto exit;
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index abca7e9f953..6679854c85b 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -27,9 +27,6 @@
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/kthread.h>
-#include <linux/semaphore.h>
 #include <linux/delay.h>
 #include <linux/wait.h>
 #include <linux/poll.h>
@@ -161,6 +158,7 @@ static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3};
 static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3};
 static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
 static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
+static struct axis_conversion lis3lv02d_axis_xy_swap = {2, 1, 3};
 static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
 static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3};
 static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
@@ -194,13 +192,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted),
 	AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted),
 	AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
+	AXIS_DMI_MATCH("NC2710", "HP Compaq 2710", xy_swap),
 	AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
 	AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
 	AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted),
 	AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
 	AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
 	AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
-	AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+	AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted),
+	AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
+	AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
 	/* Intel-based HP Pavilion dv5 */
 	AXIS_DMI_MATCH2("HPDV5_I",
 			PRODUCT_NAME, "HP Pavilion dv5",
@@ -216,7 +217,6 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	{ NULL, }
 /* Laptop models without axis info (yet):
  * "NC6910" "HP Compaq 6910"
- * HP Compaq 8710x Notebook PC / Mobile Workstation
  * "NC2400" "HP Compaq nc2400"
  * "NX74x0" "HP Compaq nx74"
  * "NX6325" "HP Compaq nx6325"
@@ -324,7 +324,7 @@ static int lis3lv02d_remove(struct acpi_device *device, int type)
 	flush_work(&hpled_led.work);
 	led_classdev_unregister(&hpled_led.led_classdev);
 
-	return lis3lv02d_remove_fs();
+	return lis3lv02d_remove_fs(&lis3_dev);
 }
 
 
@@ -338,13 +338,7 @@ static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state)
 
 static int lis3lv02d_resume(struct acpi_device *device)
 {
-	/* put back the device in the right state (ACPI might turn it on) */
-	mutex_lock(&lis3_dev.lock);
-	if (lis3_dev.usage > 0)
-		lis3lv02d_poweron(&lis3_dev);
-	else
-		lis3lv02d_poweroff(&lis3_dev);
-	mutex_unlock(&lis3_dev.lock);
+	lis3lv02d_poweron(&lis3_dev);
 	return 0;
 }
 #else
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index e15c3e7b07e..29ea6753f3b 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -18,6 +18,7 @@
 #include <linux/hwmon.h>
 #include <linux/gfp.h>
 #include <linux/spinlock.h>
+#include <linux/pci.h>
 
 #define HWMON_ID_PREFIX "hwmon"
 #define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d"
@@ -86,8 +87,36 @@ void hwmon_device_unregister(struct device *dev)
 			"hwmon_device_unregister() failed: bad class ID!\n");
 }
 
+static void __init hwmon_pci_quirks(void)
+{
+#if defined CONFIG_X86 && defined CONFIG_PCI
+	struct pci_dev *sb;
+	u16 base;
+	u8 enable;
+
+	/* Open access to 0x295-0x296 on MSI MS-7031 */
+	sb = pci_get_device(PCI_VENDOR_ID_ATI, 0x436c, NULL);
+	if (sb &&
+	    (sb->subsystem_vendor == 0x1462 &&	/* MSI */
+	     sb->subsystem_device == 0x0031)) {	/* MS-7031 */
+
+		pci_read_config_byte(sb, 0x48, &enable);
+		pci_read_config_word(sb, 0x64, &base);
+
+		if (base == 0 && !(enable & BIT(2))) {
+			dev_info(&sb->dev,
+				 "Opening wide generic port at 0x295\n");
+			pci_write_config_word(sb, 0x64, 0x295);
+			pci_write_config_byte(sb, 0x48, enable | BIT(2));
+		}
+	}
+#endif
+}
+
 static int __init hwmon_init(void)
 {
+	hwmon_pci_quirks();
+
 	hwmon_class = class_create(THIS_MODULE, "hwmon");
 	if (IS_ERR(hwmon_class)) {
 		printk(KERN_ERR "hwmon.c: couldn't create sysfs class\n");
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index fe74609a7fe..405d3fb5d76 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -1127,3 +1127,4 @@ MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755-*");
 MODULE_ALIAS("dmi:bvnIBM:*:pnIBM3850M2/x3950M2-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMBladeHC10-*");
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 778eb779598..271338bdb6b 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -27,9 +27,7 @@
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/kthread.h>
-#include <linux/semaphore.h>
+#include <linux/input-polldev.h>
 #include <linux/delay.h>
 #include <linux/wait.h>
 #include <linux/poll.h>
@@ -105,56 +103,39 @@ static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
 {
 	int position[3];
 
-	position[0] = lis3_dev.read_data(lis3, OUTX);
-	position[1] = lis3_dev.read_data(lis3, OUTY);
-	position[2] = lis3_dev.read_data(lis3, OUTZ);
+	position[0] = lis3->read_data(lis3, OUTX);
+	position[1] = lis3->read_data(lis3, OUTY);
+	position[2] = lis3->read_data(lis3, OUTZ);
 
-	*x = lis3lv02d_get_axis(lis3_dev.ac.x, position);
-	*y = lis3lv02d_get_axis(lis3_dev.ac.y, position);
-	*z = lis3lv02d_get_axis(lis3_dev.ac.z, position);
+	*x = lis3lv02d_get_axis(lis3->ac.x, position);
+	*y = lis3lv02d_get_axis(lis3->ac.y, position);
+	*z = lis3lv02d_get_axis(lis3->ac.z, position);
 }
 
 void lis3lv02d_poweroff(struct lis3lv02d *lis3)
 {
-	lis3_dev.is_on = 0;
+	/* disable X,Y,Z axis and power down */
+	lis3->write(lis3, CTRL_REG1, 0x00);
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
 
 void lis3lv02d_poweron(struct lis3lv02d *lis3)
 {
-	lis3_dev.is_on = 1;
-	lis3_dev.init(lis3);
-}
-EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
+	u8 reg;
 
-/*
- * To be called before starting to use the device. It makes sure that the
- * device will always be on until a call to lis3lv02d_decrease_use(). Not to be
- * used from interrupt context.
- */
-static void lis3lv02d_increase_use(struct lis3lv02d *dev)
-{
-	mutex_lock(&dev->lock);
-	dev->usage++;
-	if (dev->usage == 1) {
-		if (!dev->is_on)
-			lis3lv02d_poweron(dev);
-	}
-	mutex_unlock(&dev->lock);
-}
+	lis3->init(lis3);
 
-/*
- * To be called whenever a usage of the device is stopped.
- * It will make sure to turn off the device when there is not usage.
- */
-static void lis3lv02d_decrease_use(struct lis3lv02d *dev)
-{
-	mutex_lock(&dev->lock);
-	dev->usage--;
-	if (dev->usage == 0)
-		lis3lv02d_poweroff(dev);
-	mutex_unlock(&dev->lock);
+	/*
+	 * Common configuration
+	 * BDU: LSB and MSB values are not updated until both have been read.
+	 *      So the value read will always be correct.
+	 */
+	lis3->read(lis3, CTRL_REG2, &reg);
+	reg |= CTRL2_BDU;
+	lis3->write(lis3, CTRL_REG2, reg);
 }
+EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
+
 
 static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
 {
@@ -198,15 +179,12 @@ static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
 		printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", lis3_dev.irq);
 		return -EBUSY;
 	}
-	lis3lv02d_increase_use(&lis3_dev);
-	printk("lis3: registered interrupt %d\n", lis3_dev.irq);
 	return 0;
 }
 
 static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
 {
 	fasync_helper(-1, file, 0, &lis3_dev.async_queue);
-	lis3lv02d_decrease_use(&lis3_dev);
 	free_irq(lis3_dev.irq, &lis3_dev);
 	clear_bit(0, &lis3_dev.misc_opened); /* release the device */
 	return 0;
@@ -290,46 +268,16 @@ static struct miscdevice lis3lv02d_misc_device = {
 	.fops    = &lis3lv02d_misc_fops,
 };
 
-/**
- * lis3lv02d_joystick_kthread - Kthread polling function
- * @data: unused - here to conform to threadfn prototype
- */
-static int lis3lv02d_joystick_kthread(void *data)
+static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
 {
 	int x, y, z;
 
-	while (!kthread_should_stop()) {
-		lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
-		input_report_abs(lis3_dev.idev, ABS_X, x - lis3_dev.xcalib);
-		input_report_abs(lis3_dev.idev, ABS_Y, y - lis3_dev.ycalib);
-		input_report_abs(lis3_dev.idev, ABS_Z, z - lis3_dev.zcalib);
-
-		input_sync(lis3_dev.idev);
-
-		try_to_freeze();
-		msleep_interruptible(MDPS_POLL_INTERVAL);
-	}
-
-	return 0;
-}
-
-static int lis3lv02d_joystick_open(struct input_dev *input)
-{
-	lis3lv02d_increase_use(&lis3_dev);
-	lis3_dev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d");
-	if (IS_ERR(lis3_dev.kthread)) {
-		lis3lv02d_decrease_use(&lis3_dev);
-		return PTR_ERR(lis3_dev.kthread);
-	}
-
-	return 0;
+	lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
+	input_report_abs(pidev->input, ABS_X, x - lis3_dev.xcalib);
+	input_report_abs(pidev->input, ABS_Y, y - lis3_dev.ycalib);
+	input_report_abs(pidev->input, ABS_Z, z - lis3_dev.zcalib);
 }
 
-static void lis3lv02d_joystick_close(struct input_dev *input)
-{
-	kthread_stop(lis3_dev.kthread);
-	lis3lv02d_decrease_use(&lis3_dev);
-}
 
 static inline void lis3lv02d_calibrate_joystick(void)
 {
@@ -339,33 +287,36 @@ static inline void lis3lv02d_calibrate_joystick(void)
 
 int lis3lv02d_joystick_enable(void)
 {
+	struct input_dev *input_dev;
 	int err;
 
 	if (lis3_dev.idev)
 		return -EINVAL;
 
-	lis3_dev.idev = input_allocate_device();
+	lis3_dev.idev = input_allocate_polled_device();
 	if (!lis3_dev.idev)
 		return -ENOMEM;
 
+	lis3_dev.idev->poll = lis3lv02d_joystick_poll;
+	lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
+	input_dev = lis3_dev.idev->input;
+
 	lis3lv02d_calibrate_joystick();
 
-	lis3_dev.idev->name       = "ST LIS3LV02DL Accelerometer";
-	lis3_dev.idev->phys       = DRIVER_NAME "/input0";
-	lis3_dev.idev->id.bustype = BUS_HOST;
-	lis3_dev.idev->id.vendor  = 0;
-	lis3_dev.idev->dev.parent = &lis3_dev.pdev->dev;
-	lis3_dev.idev->open       = lis3lv02d_joystick_open;
-	lis3_dev.idev->close      = lis3lv02d_joystick_close;
+	input_dev->name       = "ST LIS3LV02DL Accelerometer";
+	input_dev->phys       = DRIVER_NAME "/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor  = 0;
+	input_dev->dev.parent = &lis3_dev.pdev->dev;
 
-	set_bit(EV_ABS, lis3_dev.idev->evbit);
-	input_set_abs_params(lis3_dev.idev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
-	input_set_abs_params(lis3_dev.idev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
-	input_set_abs_params(lis3_dev.idev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+	set_bit(EV_ABS, input_dev->evbit);
+	input_set_abs_params(input_dev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+	input_set_abs_params(input_dev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+	input_set_abs_params(input_dev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
 
-	err = input_register_device(lis3_dev.idev);
+	err = input_register_polled_device(lis3_dev.idev);
 	if (err) {
-		input_free_device(lis3_dev.idev);
+		input_free_polled_device(lis3_dev.idev);
 		lis3_dev.idev = NULL;
 	}
 
@@ -378,8 +329,9 @@ void lis3lv02d_joystick_disable(void)
 	if (!lis3_dev.idev)
 		return;
 
-	misc_deregister(&lis3lv02d_misc_device);
-	input_unregister_device(lis3_dev.idev);
+	if (lis3_dev.irq)
+		misc_deregister(&lis3lv02d_misc_device);
+	input_unregister_polled_device(lis3_dev.idev);
 	lis3_dev.idev = NULL;
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
@@ -390,9 +342,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev,
 {
 	int x, y, z;
 
-	lis3lv02d_increase_use(&lis3_dev);
 	lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
-	lis3lv02d_decrease_use(&lis3_dev);
 	return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
 }
 
@@ -406,9 +356,7 @@ static ssize_t lis3lv02d_calibrate_store(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
-	lis3lv02d_increase_use(&lis3_dev);
 	lis3lv02d_calibrate_joystick();
-	lis3lv02d_decrease_use(&lis3_dev);
 	return count;
 }
 
@@ -420,9 +368,7 @@ static ssize_t lis3lv02d_rate_show(struct device *dev,
 	u8 ctrl;
 	int val;
 
-	lis3lv02d_increase_use(&lis3_dev);
 	lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
-	lis3lv02d_decrease_use(&lis3_dev);
 	val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
 	return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
 }
@@ -446,17 +392,17 @@ static struct attribute_group lis3lv02d_attribute_group = {
 
 static int lis3lv02d_add_fs(struct lis3lv02d *lis3)
 {
-	lis3_dev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
-	if (IS_ERR(lis3_dev.pdev))
-		return PTR_ERR(lis3_dev.pdev);
+	lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+	if (IS_ERR(lis3->pdev))
+		return PTR_ERR(lis3->pdev);
 
-	return sysfs_create_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group);
+	return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
 }
 
-int lis3lv02d_remove_fs(void)
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3)
 {
-	sysfs_remove_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group);
-	platform_device_unregister(lis3_dev.pdev);
+	sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
+	platform_device_unregister(lis3->pdev);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
@@ -482,18 +428,35 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 		break;
 	default:
 		printk(KERN_ERR DRIVER_NAME
-			": unknown sensor type 0x%X\n", lis3_dev.whoami);
+			": unknown sensor type 0x%X\n", dev->whoami);
 		return -EINVAL;
 	}
 
-	mutex_init(&dev->lock);
 	lis3lv02d_add_fs(dev);
-	lis3lv02d_increase_use(dev);
+	lis3lv02d_poweron(dev);
 
 	if (lis3lv02d_joystick_enable())
 		printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
 
-	printk("lis3_init_device: irq %d\n", dev->irq);
+	/* passing in platform specific data is purely optional and only
+	 * used by the SPI transport layer at the moment */
+	if (dev->pdata) {
+		struct lis3lv02d_platform_data *p = dev->pdata;
+
+		if (p->click_flags && (dev->whoami == LIS_SINGLE_ID)) {
+			dev->write(dev, CLICK_CFG, p->click_flags);
+			dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit);
+			dev->write(dev, CLICK_LATENCY, p->click_latency);
+			dev->write(dev, CLICK_WINDOW, p->click_window);
+			dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf);
+			dev->write(dev, CLICK_THSY_X,
+					(p->click_thresh_x & 0xf) |
+					(p->click_thresh_y << 4));
+		}
+
+		if (p->irq_cfg)
+			dev->write(dev, CTRL_REG3, p->irq_cfg);
+	}
 
 	/* bail if we did not get an IRQ from the bus layer */
 	if (!dev->irq) {
@@ -502,11 +465,9 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 		goto out;
 	}
 
-	printk("lis3: registering device\n");
 	if (misc_register(&lis3lv02d_misc_device))
 		printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
 out:
-	lis3lv02d_decrease_use(dev);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(lis3lv02d_init_device);
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 745ec96806d..e320e2f511f 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -18,6 +18,8 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/platform_device.h>
+#include <linux/input-polldev.h>
 
 /*
  * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
@@ -27,12 +29,14 @@
  * They can also be connected via I²C.
  */
 
+#include <linux/lis3lv02d.h>
+
 /* 2-byte registers */
 #define LIS_DOUBLE_ID	0x3A /* LIS3LV02D[LQ] */
 /* 1-byte registers */
 #define LIS_SINGLE_ID	0x3B /* LIS[32]02DL and others */
 
-enum lis3lv02d_reg {
+enum lis3_reg {
 	WHO_AM_I	= 0x0F,
 	OFFSET_X	= 0x16,
 	OFFSET_Y	= 0x17,
@@ -60,6 +64,19 @@ enum lis3lv02d_reg {
 	FF_WU_THS_L	= 0x34,
 	FF_WU_THS_H	= 0x35,
 	FF_WU_DURATION	= 0x36,
+};
+
+enum lis302d_reg {
+	CLICK_CFG	= 0x38,
+	CLICK_SRC	= 0x39,
+	CLICK_THSY_X	= 0x3B,
+	CLICK_THSZ	= 0x3C,
+	CLICK_TIMELIMIT	= 0x3D,
+	CLICK_LATENCY	= 0x3E,
+	CLICK_WINDOW	= 0x3F,
+};
+
+enum lis3lv02d_reg {
 	DD_CFG		= 0x38,
 	DD_SRC		= 0x39,
 	DD_ACK		= 0x3A,
@@ -169,22 +186,20 @@ struct lis3lv02d {
 	s16 (*read_data) (struct lis3lv02d *lis3, int reg);
 	int			mdps_max_val;
 
-	struct input_dev	*idev;     /* input device */
-	struct task_struct	*kthread;  /* kthread for input */
-	struct mutex            lock;
+	struct input_polled_dev	*idev;     /* input device */
 	struct platform_device	*pdev;     /* platform device */
 	atomic_t		count;     /* interrupt count after last read */
 	int			xcalib;    /* calibrated null value for x */
 	int			ycalib;    /* calibrated null value for y */
 	int			zcalib;    /* calibrated null value for z */
-	unsigned char		is_on;     /* whether the device is on or off */
-	unsigned char		usage;     /* usage counter */
 	struct axis_conversion	ac;        /* hw -> logical axis */
 
 	u32			irq;       /* IRQ number */
 	struct fasync_struct	*async_queue; /* queue for the misc device */
 	wait_queue_head_t	misc_wait; /* Wait queue for the misc device */
 	unsigned long		misc_opened; /* bit0: whether the device is open */
+
+	struct lis3lv02d_platform_data *pdata;	/* for passing board config */
 };
 
 int lis3lv02d_init_device(struct lis3lv02d *lis3);
@@ -192,6 +207,6 @@ int lis3lv02d_joystick_enable(void);
 void lis3lv02d_joystick_disable(void);
 void lis3lv02d_poweroff(struct lis3lv02d *lis3);
 void lis3lv02d_poweron(struct lis3lv02d *lis3);
-int lis3lv02d_remove_fs(void);
+int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
 
 extern struct lis3lv02d lis3_dev;
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index 07ae74b0e19..3827ff04485 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -72,6 +72,7 @@ static int __devinit lis302dl_spi_probe(struct spi_device *spi)
 	lis3_dev.write = lis3_spi_write;
 	lis3_dev.irq = spi->irq;
 	lis3_dev.ac = lis3lv02d_axis_normal;
+	lis3_dev.pdata = spi->dev.platform_data;
 	spi_set_drvdata(spi, &lis3_dev);
 
 	ret = lis3lv02d_init_device(&lis3_dev);
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index f27af6a9da4..86142a85823 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -12,7 +12,7 @@
  * also work with the MAX6651. It does not distinguish max6650 and max6651
  * chips.
  *
- * Tha datasheet was last seen at:
+ * The datasheet was last seen at:
  *
  *        http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
  *
@@ -98,6 +98,16 @@ I2C_CLIENT_INSMOD_1(max6650);
 #define MAX6650_CFG_MODE_OPEN_LOOP	0x30
 #define MAX6650_COUNT_MASK		0x03
 
+/*
+ * Alarm status register bits
+ */
+
+#define MAX6650_ALRM_MAX	0x01
+#define MAX6650_ALRM_MIN	0x02
+#define MAX6650_ALRM_TACH	0x04
+#define MAX6650_ALRM_GPIO1	0x08
+#define MAX6650_ALRM_GPIO2	0x10
+
 /* Minimum and maximum values of the FAN-RPM */
 #define FAN_RPM_MIN 240
 #define FAN_RPM_MAX 30000
@@ -151,6 +161,7 @@ struct max6650_data
 	u8 tach[4];
 	u8 count;
 	u8 dac;
+	u8 alarm;
 };
 
 static ssize_t get_fan(struct device *dev, struct device_attribute *devattr,
@@ -418,6 +429,33 @@ static ssize_t set_div(struct device *dev, struct device_attribute *devattr,
 	return count;
 }
 
+/*
+ * Get alarm stati:
+ * Possible values:
+ * 0 = no alarm
+ * 1 = alarm
+ */
+
+static ssize_t get_alarm(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max6650_data *data = max6650_update_device(dev);
+	struct i2c_client *client = to_i2c_client(dev);
+	int alarm = 0;
+
+	if (data->alarm & attr->index) {
+		mutex_lock(&data->update_lock);
+		alarm = 1;
+		data->alarm &= ~attr->index;
+		data->alarm |= i2c_smbus_read_byte_data(client,
+							MAX6650_REG_ALARM);
+		mutex_unlock(&data->update_lock);
+	}
+
+	return sprintf(buf, "%d\n", alarm);
+}
+
 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, 0);
 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, get_fan, NULL, 1);
 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, get_fan, NULL, 2);
@@ -426,7 +464,41 @@ static DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO, get_target, set_target);
 static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, get_div, set_div);
 static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, get_enable, set_enable);
 static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm);
+static SENSOR_DEVICE_ATTR(fan1_max_alarm, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_MAX);
+static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_MIN);
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_TACH);
+static SENSOR_DEVICE_ATTR(gpio1_alarm, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_GPIO1);
+static SENSOR_DEVICE_ATTR(gpio2_alarm, S_IRUGO, get_alarm, NULL,
+			  MAX6650_ALRM_GPIO2);
+
+static mode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
+				    int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 alarm_en = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN);
+	struct device_attribute *devattr;
 
+	/*
+	 * Hide the alarms that have not been enabled by the firmware
+	 */
+
+	devattr = container_of(a, struct device_attribute, attr);
+	if (devattr == &sensor_dev_attr_fan1_max_alarm.dev_attr
+	 || devattr == &sensor_dev_attr_fan1_min_alarm.dev_attr
+	 || devattr == &sensor_dev_attr_fan1_fault.dev_attr
+	 || devattr == &sensor_dev_attr_gpio1_alarm.dev_attr
+	 || devattr == &sensor_dev_attr_gpio2_alarm.dev_attr) {
+		if (!(alarm_en & to_sensor_dev_attr(devattr)->index))
+			return 0;
+	}
+
+	return a->mode;
+}
 
 static struct attribute *max6650_attrs[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
@@ -437,11 +509,17 @@ static struct attribute *max6650_attrs[] = {
 	&dev_attr_fan1_div.attr,
 	&dev_attr_pwm1_enable.attr,
 	&dev_attr_pwm1.attr,
+	&sensor_dev_attr_fan1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_fault.dev_attr.attr,
+	&sensor_dev_attr_gpio1_alarm.dev_attr.attr,
+	&sensor_dev_attr_gpio2_alarm.dev_attr.attr,
 	NULL
 };
 
 static struct attribute_group max6650_attr_grp = {
 	.attrs = max6650_attrs,
+	.is_visible = max6650_attrs_visible,
 };
 
 /*
@@ -659,6 +737,12 @@ static struct max6650_data *max6650_update_device(struct device *dev)
 							MAX6650_REG_COUNT);
 		data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC);
 
+		/* Alarms are cleared on read in case the condition that
+		 * caused the alarm is removed. Keep the value latched here
+		 * for providing the register through different alarm files. */
+		data->alarm |= i2c_smbus_read_byte_data(client,
+							MAX6650_REG_ALARM);
+
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 6cbdc2fea73..56cd6004da3 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -627,35 +627,35 @@ static struct platform_driver sht_drivers[] = {
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	}, {
 		.driver = {
 			.name = "sht11",
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	}, {
 		.driver = {
 			.name = "sht15",
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	}, {
 		.driver = {
 			.name = "sht71",
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	}, {
 		.driver = {
 			.name = "sht75",
 			.owner = THIS_MODULE,
 		},
 		.probe = sht15_probe,
-		.remove = sht15_remove,
+		.remove = __devexit_p(sht15_remove),
 	},
 };
 
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
new file mode 100644
index 00000000000..7b34f2cd08b
--- /dev/null
+++ b/drivers/hwmon/tmp401.c
@@ -0,0 +1,690 @@
+/* tmp401.c
+ *
+ * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
+ * Preliminary tmp411 support by:
+ * Gabriel Konat, Sander Leget, Wouter Willems
+ * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
+ *
+ * Note this IC is in some aspect similar to the LM90, but it has quite a
+ * few differences too, for example the local temp has a higher resolution
+ * and thus has 16 bits registers for its value and limit instead of 8 bits.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_2(tmp401, tmp411);
+
+/*
+ * The TMP401 registers, note some registers have different addresses for
+ * reading and writing
+ */
+#define TMP401_STATUS				0x02
+#define TMP401_CONFIG_READ			0x03
+#define TMP401_CONFIG_WRITE			0x09
+#define TMP401_CONVERSION_RATE_READ		0x04
+#define TMP401_CONVERSION_RATE_WRITE		0x0A
+#define TMP401_TEMP_CRIT_HYST			0x21
+#define TMP401_CONSECUTIVE_ALERT		0x22
+#define TMP401_MANUFACTURER_ID_REG		0xFE
+#define TMP401_DEVICE_ID_REG			0xFF
+#define TMP411_N_FACTOR_REG			0x18
+
+static const u8 TMP401_TEMP_MSB[2]			= { 0x00, 0x01 };
+static const u8 TMP401_TEMP_LSB[2]			= { 0x15, 0x10 };
+static const u8 TMP401_TEMP_LOW_LIMIT_MSB_READ[2]	= { 0x06, 0x08 };
+static const u8 TMP401_TEMP_LOW_LIMIT_MSB_WRITE[2]	= { 0x0C, 0x0E };
+static const u8 TMP401_TEMP_LOW_LIMIT_LSB[2]		= { 0x17, 0x14 };
+static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_READ[2]	= { 0x05, 0x07 };
+static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[2]	= { 0x0B, 0x0D };
+static const u8 TMP401_TEMP_HIGH_LIMIT_LSB[2]		= { 0x16, 0x13 };
+/* These are called the THERM limit / hysteresis / mask in the datasheet */
+static const u8 TMP401_TEMP_CRIT_LIMIT[2]		= { 0x20, 0x19 };
+
+static const u8 TMP411_TEMP_LOWEST_MSB[2]		= { 0x30, 0x34 };
+static const u8 TMP411_TEMP_LOWEST_LSB[2]		= { 0x31, 0x35 };
+static const u8 TMP411_TEMP_HIGHEST_MSB[2]		= { 0x32, 0x36 };
+static const u8 TMP411_TEMP_HIGHEST_LSB[2]		= { 0x33, 0x37 };
+
+/* Flags */
+#define TMP401_CONFIG_RANGE		0x04
+#define TMP401_CONFIG_SHUTDOWN		0x40
+#define TMP401_STATUS_LOCAL_CRIT		0x01
+#define TMP401_STATUS_REMOTE_CRIT		0x02
+#define TMP401_STATUS_REMOTE_OPEN		0x04
+#define TMP401_STATUS_REMOTE_LOW		0x08
+#define TMP401_STATUS_REMOTE_HIGH		0x10
+#define TMP401_STATUS_LOCAL_LOW		0x20
+#define TMP401_STATUS_LOCAL_HIGH		0x40
+
+/* Manufacturer / Device ID's */
+#define TMP401_MANUFACTURER_ID			0x55
+#define TMP401_DEVICE_ID			0x11
+#define TMP411_DEVICE_ID			0x12
+
+/*
+ * Functions declarations
+ */
+
+static int tmp401_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int tmp401_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info);
+static int tmp401_remove(struct i2c_client *client);
+static struct tmp401_data *tmp401_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static const struct i2c_device_id tmp401_id[] = {
+	{ "tmp401", tmp401 },
+	{ "tmp411", tmp411 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tmp401_id);
+
+static struct i2c_driver tmp401_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "tmp401",
+	},
+	.probe		= tmp401_probe,
+	.remove		= tmp401_remove,
+	.id_table	= tmp401_id,
+	.detect		= tmp401_detect,
+	.address_data	= &addr_data,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct tmp401_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+	int kind;
+
+	/* register values */
+	u8 status;
+	u8 config;
+	u16 temp[2];
+	u16 temp_low[2];
+	u16 temp_high[2];
+	u8 temp_crit[2];
+	u8 temp_crit_hyst;
+	u16 temp_lowest[2];
+	u16 temp_highest[2];
+};
+
+/*
+ * Sysfs attr show / store functions
+ */
+
+static int tmp401_register_to_temp(u16 reg, u8 config)
+{
+	int temp = reg;
+
+	if (config & TMP401_CONFIG_RANGE)
+		temp -= 64 * 256;
+
+	return (temp * 625 + 80) / 160;
+}
+
+static u16 tmp401_temp_to_register(long temp, u8 config)
+{
+	if (config & TMP401_CONFIG_RANGE) {
+		temp = SENSORS_LIMIT(temp, -64000, 191000);
+		temp += 64000;
+	} else
+		temp = SENSORS_LIMIT(temp, 0, 127000);
+
+	return (temp * 160 + 312) / 625;
+}
+
+static int tmp401_crit_register_to_temp(u8 reg, u8 config)
+{
+	int temp = reg;
+
+	if (config & TMP401_CONFIG_RANGE)
+		temp -= 64;
+
+	return temp * 1000;
+}
+
+static u8 tmp401_crit_temp_to_register(long temp, u8 config)
+{
+	if (config & TMP401_CONFIG_RANGE) {
+		temp = SENSORS_LIMIT(temp, -64000, 191000);
+		temp += 64000;
+	} else
+		temp = SENSORS_LIMIT(temp, 0, 127000);
+
+	return (temp + 500) / 1000;
+}
+
+static ssize_t show_temp_value(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp[index], data->config));
+}
+
+static ssize_t show_temp_min(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp_low[index], data->config));
+}
+
+static ssize_t show_temp_max(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp_high[index], data->config));
+}
+
+static ssize_t show_temp_crit(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+			tmp401_crit_register_to_temp(data->temp_crit[index],
+							data->config));
+}
+
+static ssize_t show_temp_crit_hyst(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int temp, index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	mutex_lock(&data->update_lock);
+	temp = tmp401_crit_register_to_temp(data->temp_crit[index],
+						data->config);
+	temp -= data->temp_crit_hyst * 1000;
+	mutex_unlock(&data->update_lock);
+
+	return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t show_temp_lowest(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp_lowest[index],
+					data->config));
+}
+
+static ssize_t show_temp_highest(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		tmp401_register_to_temp(data->temp_highest[index],
+					data->config));
+}
+
+static ssize_t show_status(struct device *dev,
+	struct device_attribute *devattr, char *buf)
+{
+	int mask = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+
+	if (data->status & mask)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t store_temp_min(struct device *dev, struct device_attribute
+	*devattr, const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+	long val;
+	u16 reg;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	reg = tmp401_temp_to_register(val, data->config);
+
+	mutex_lock(&data->update_lock);
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_LOW_LIMIT_MSB_WRITE[index], reg >> 8);
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_LOW_LIMIT_LSB[index], reg & 0xFF);
+
+	data->temp_low[index] = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t store_temp_max(struct device *dev, struct device_attribute
+	*devattr, const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+	long val;
+	u16 reg;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	reg = tmp401_temp_to_register(val, data->config);
+
+	mutex_lock(&data->update_lock);
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[index], reg >> 8);
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_HIGH_LIMIT_LSB[index], reg & 0xFF);
+
+	data->temp_high[index] = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t store_temp_crit(struct device *dev, struct device_attribute
+	*devattr, const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+	long val;
+	u8 reg;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	reg = tmp401_crit_temp_to_register(val, data->config);
+
+	mutex_lock(&data->update_lock);
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_CRIT_LIMIT[index], reg);
+
+	data->temp_crit[index] = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
+	*devattr, const char *buf, size_t count)
+{
+	int temp, index = to_sensor_dev_attr(devattr)->index;
+	struct tmp401_data *data = tmp401_update_device(dev);
+	long val;
+	u8 reg;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	if (data->config & TMP401_CONFIG_RANGE)
+		val = SENSORS_LIMIT(val, -64000, 191000);
+	else
+		val = SENSORS_LIMIT(val, 0, 127000);
+
+	mutex_lock(&data->update_lock);
+	temp = tmp401_crit_register_to_temp(data->temp_crit[index],
+						data->config);
+	val = SENSORS_LIMIT(val, temp - 255000, temp);
+	reg = ((temp - val) + 500) / 1000;
+
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP401_TEMP_CRIT_HYST, reg);
+
+	data->temp_crit_hyst = reg;
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/*
+ * Resets the historical measurements of minimum and maximum temperatures.
+ * This is done by writing any value to any of the minimum/maximum registers
+ * (0x30-0x37).
+ */
+static ssize_t reset_temp_history(struct device *dev,
+	struct device_attribute	*devattr, const char *buf, size_t count)
+{
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	if (val != 1) {
+		dev_err(dev, "temp_reset_history value %ld not"
+			" supported. Use 1 to reset the history!\n", val);
+		return -EINVAL;
+	}
+	i2c_smbus_write_byte_data(to_i2c_client(dev),
+		TMP411_TEMP_LOWEST_MSB[0], val);
+
+	return count;
+}
+
+static struct sensor_device_attribute tmp401_attr[] = {
+	SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
+	SENSOR_ATTR(temp1_min, 0644, show_temp_min, store_temp_min, 0),
+	SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
+	SENSOR_ATTR(temp1_crit, 0644, show_temp_crit, store_temp_crit, 0),
+	SENSOR_ATTR(temp1_crit_hyst, 0644, show_temp_crit_hyst,
+		    store_temp_crit_hyst, 0),
+	SENSOR_ATTR(temp1_min_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_LOCAL_LOW),
+	SENSOR_ATTR(temp1_max_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_LOCAL_HIGH),
+	SENSOR_ATTR(temp1_crit_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_LOCAL_CRIT),
+	SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
+	SENSOR_ATTR(temp2_min, 0644, show_temp_min, store_temp_min, 1),
+	SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
+	SENSOR_ATTR(temp2_crit, 0644, show_temp_crit, store_temp_crit, 1),
+	SENSOR_ATTR(temp2_crit_hyst, 0444, show_temp_crit_hyst, NULL, 1),
+	SENSOR_ATTR(temp2_fault, 0444, show_status, NULL,
+		    TMP401_STATUS_REMOTE_OPEN),
+	SENSOR_ATTR(temp2_min_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_REMOTE_LOW),
+	SENSOR_ATTR(temp2_max_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_REMOTE_HIGH),
+	SENSOR_ATTR(temp2_crit_alarm, 0444, show_status, NULL,
+		    TMP401_STATUS_REMOTE_CRIT),
+};
+
+/*
+ * Additional features of the TMP411 chip.
+ * The TMP411 stores the minimum and maximum
+ * temperature measured since power-on, chip-reset, or
+ * minimum and maximum register reset for both the local
+ * and remote channels.
+ */
+static struct sensor_device_attribute tmp411_attr[] = {
+	SENSOR_ATTR(temp1_highest, 0444, show_temp_highest, NULL, 0),
+	SENSOR_ATTR(temp1_lowest, 0444, show_temp_lowest, NULL, 0),
+	SENSOR_ATTR(temp2_highest, 0444, show_temp_highest, NULL, 1),
+	SENSOR_ATTR(temp2_lowest, 0444, show_temp_lowest, NULL, 1),
+	SENSOR_ATTR(temp_reset_history, 0200, NULL, reset_temp_history, 0),
+};
+
+/*
+ * Begin non sysfs callback code (aka Real code)
+ */
+
+static void tmp401_init_client(struct i2c_client *client)
+{
+	int config, config_orig;
+
+	/* Set the conversion rate to 2 Hz */
+	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
+
+	/* Start conversions (disable shutdown if necessary) */
+	config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+	if (config < 0) {
+		dev_warn(&client->dev, "Initialization failed!\n");
+		return;
+	}
+
+	config_orig = config;
+	config &= ~TMP401_CONFIG_SHUTDOWN;
+
+	if (config != config_orig)
+		i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
+}
+
+static int tmp401_detect(struct i2c_client *client, int kind,
+			 struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/* Detect and identify the chip */
+	if (kind <= 0) {
+		u8 reg;
+
+		reg = i2c_smbus_read_byte_data(client,
+					       TMP401_MANUFACTURER_ID_REG);
+		if (reg != TMP401_MANUFACTURER_ID)
+			return -ENODEV;
+
+		reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
+
+		switch (reg) {
+		case TMP401_DEVICE_ID:
+			kind = tmp401;
+			break;
+		case TMP411_DEVICE_ID:
+			kind = tmp411;
+			break;
+		default:
+			return -ENODEV;
+		}
+
+		reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+		if (reg & 0x1b)
+			return -ENODEV;
+
+		reg = i2c_smbus_read_byte_data(client,
+					       TMP401_CONVERSION_RATE_READ);
+		/* Datasheet says: 0x1-0x6 */
+		if (reg > 15)
+			return -ENODEV;
+	}
+	strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int tmp401_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int i, err = 0;
+	struct tmp401_data *data;
+	const char *names[] = { "TMP401", "TMP411" };
+
+	data = kzalloc(sizeof(struct tmp401_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+	data->kind = id->driver_data;
+
+	/* Initialize the TMP401 chip */
+	tmp401_init_client(client);
+
+	/* Register sysfs hooks */
+	for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++) {
+		err = device_create_file(&client->dev,
+					 &tmp401_attr[i].dev_attr);
+		if (err)
+			goto exit_remove;
+	}
+
+	/* Register aditional tmp411 sysfs hooks */
+	if (data->kind == tmp411) {
+		for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++) {
+			err = device_create_file(&client->dev,
+						 &tmp411_attr[i].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
+	}
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		data->hwmon_dev = NULL;
+		goto exit_remove;
+	}
+
+	dev_info(&client->dev, "Detected TI %s chip\n",
+		 names[data->kind - 1]);
+
+	return 0;
+
+exit_remove:
+	tmp401_remove(client); /* will also free data for us */
+	return err;
+}
+
+static int tmp401_remove(struct i2c_client *client)
+{
+	struct tmp401_data *data = i2c_get_clientdata(client);
+	int i;
+
+	if (data->hwmon_dev)
+		hwmon_device_unregister(data->hwmon_dev);
+
+	for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++)
+		device_remove_file(&client->dev, &tmp401_attr[i].dev_attr);
+
+	if (data->kind == tmp411) {
+		for (i = 0; i < ARRAY_SIZE(tmp411_attr); i++)
+			device_remove_file(&client->dev,
+					   &tmp411_attr[i].dev_attr);
+	}
+
+	kfree(data);
+	return 0;
+}
+
+static struct tmp401_data *tmp401_update_device_reg16(
+	struct i2c_client *client, struct tmp401_data *data)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		/*
+		 * High byte must be read first immediately followed
+		 * by the low byte
+		 */
+		data->temp[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_MSB[i]) << 8;
+		data->temp[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LSB[i]);
+		data->temp_low[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
+		data->temp_low[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_LOW_LIMIT_LSB[i]);
+		data->temp_high[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
+		data->temp_high[i] |= i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_HIGH_LIMIT_LSB[i]);
+		data->temp_crit[i] = i2c_smbus_read_byte_data(client,
+			TMP401_TEMP_CRIT_LIMIT[i]);
+
+		if (data->kind == tmp411) {
+			data->temp_lowest[i] = i2c_smbus_read_byte_data(client,
+				TMP411_TEMP_LOWEST_MSB[i]) << 8;
+			data->temp_lowest[i] |= i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_LOWEST_LSB[i]);
+
+			data->temp_highest[i] = i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_HIGHEST_MSB[i]) << 8;
+			data->temp_highest[i] |= i2c_smbus_read_byte_data(
+				client, TMP411_TEMP_HIGHEST_LSB[i]);
+		}
+	}
+	return data;
+}
+
+static struct tmp401_data *tmp401_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tmp401_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS);
+		data->config = i2c_smbus_read_byte_data(client,
+						TMP401_CONFIG_READ);
+		tmp401_update_device_reg16(client, data);
+
+		data->temp_crit_hyst = i2c_smbus_read_byte_data(client,
+						TMP401_TEMP_CRIT_HYST);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+static int __init tmp401_init(void)
+{
+	return i2c_add_driver(&tmp401_driver);
+}
+
+static void __exit tmp401_exit(void)
+{
+	i2c_del_driver(&tmp401_driver);
+}
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(tmp401_init);
+module_exit(tmp401_exit);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index e64b42058b2..0e9746913d2 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -36,6 +36,7 @@
     w83627ehf   10      5       4       3      0x8850 0x88    0x5ca3
                                                0x8860 0xa1
     w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
+    w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
     w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
 */
 
@@ -53,12 +54,13 @@
 #include <asm/io.h>
 #include "lm75.h"
 
-enum kinds { w83627ehf, w83627dhg, w83667hg };
+enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg };
 
 /* used to set data->name = w83627ehf_device_names[data->sio_kind] */
 static const char * w83627ehf_device_names[] = {
 	"w83627ehf",
 	"w83627dhg",
+	"w83627dhg",
 	"w83667hg",
 };
 
@@ -86,6 +88,7 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID");
 #define SIO_W83627EHF_ID	0x8850
 #define SIO_W83627EHG_ID	0x8860
 #define SIO_W83627DHG_ID	0xa020
+#define SIO_W83627DHG_P_ID	0xb070
 #define SIO_W83667HG_ID 	0xa510
 #define SIO_ID_MASK		0xFFF0
 
@@ -1517,6 +1520,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 	static const char __initdata sio_name_W83627EHF[] = "W83627EHF";
 	static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
 	static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
+	static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P";
 	static const char __initdata sio_name_W83667HG[] = "W83667HG";
 
 	u16 val;
@@ -1542,6 +1546,10 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 		sio_data->kind = w83627dhg;
 		sio_name = sio_name_W83627DHG;
 		break;
+	case SIO_W83627DHG_P_ID:
+		sio_data->kind = w83627dhg_p;
+		sio_name = sio_name_W83627DHG_P;
+		break;
 	case SIO_W83667HG_ID:
 		sio_data->kind = w83667hg;
 		sio_name = sio_name_W83667HG;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c8460fa9cfa..3c259ee7ddd 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -211,7 +211,7 @@ config I2C_VIA
 	  will be called i2c-via.
 
 config I2C_VIAPRO
-	tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820"
+	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx"
 	depends on PCI
 	help
 	  If you say yes to this option, support will be included for the VIA
@@ -225,8 +225,8 @@ config I2C_VIAPRO
 	    VT8237R/A/S
 	    VT8251
 	    CX700
-	    VX800
-	    VX820
+	    VX800/VX820
+	    VX855/VX875
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.
@@ -513,6 +513,19 @@ config I2C_SIMTEC
 	  This driver can also be built as a module. If so, the module
 	  will be called i2c-simtec.
 
+config I2C_STU300
+	tristate "ST Microelectronics DDC I2C interface"
+	depends on MACH_U300
+	default y if MACH_U300
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface from ST Microelectronics simply called "DDC I2C"
+	  supporting both I2C and DDC, used in e.g. the U300 series
+	  mobile platforms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-stu300.
+
 config I2C_VERSATILE
 	tristate "ARM Versatile/Realview I2C bus support"
 	depends on ARCH_VERSATILE || ARCH_REALVIEW
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 776acb6403a..edeabf00310 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_I2C_S6000)		+= i2c-s6000.o
 obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
 obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
 obj-$(CONFIG_I2C_SIMTEC)	+= i2c-simtec.o
+obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
 
 # External I2C/SMBus adapter drivers
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 67d9dc5b351..06e1ecb4919 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -200,10 +200,10 @@ static int __devinit at91_i2c_probe(struct platform_device *pdev)
 	if (!res)
 		return -ENXIO;
 
-	if (!request_mem_region(res->start, res->end - res->start + 1, "at91_i2c"))
+	if (!request_mem_region(res->start, resource_size(res), "at91_i2c"))
 		return -EBUSY;
 
-	twi_base = ioremap(res->start, res->end - res->start + 1);
+	twi_base = ioremap(res->start, resource_size(res));
 	if (!twi_base) {
 		rc = -ENOMEM;
 		goto fail0;
@@ -252,7 +252,7 @@ fail2:
 fail1:
 	iounmap(twi_base);
 fail0:
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 
 	return rc;
 }
@@ -268,7 +268,7 @@ static int __devexit at91_i2c_remove(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	iounmap(twi_base);
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 
 	clk_disable(twi_clk);		/* disable peripheral clock */
 	clk_put(twi_clk);
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index f78ce523e3d..532828bc50e 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -389,7 +389,7 @@ i2c_au1550_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	priv->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+	priv->ioarea = request_mem_region(r->start, resource_size(r),
 					  pdev->name);
 	if (!priv->ioarea) {
 		ret = -EBUSY;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 26d8987e69b..b309ac2c3d5 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
+#include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/timer.h>
 #include <linux/spinlock.h>
@@ -651,7 +652,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 		goto out_error_get_res;
 	}
 
-	iface->regs_base = ioremap(res->start, res->end - res->start + 1);
+	iface->regs_base = ioremap(res->start, resource_size(res));
 	if (iface->regs_base == NULL) {
 		dev_err(&pdev->dev, "Cannot map IO\n");
 		rc = -ENXIO;
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index e5a8dae4a28..87ecace415d 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -373,7 +373,7 @@ static int __devinit highlander_i2c_probe(struct platform_device *pdev)
 	if (unlikely(!dev))
 		return -ENOMEM;
 
-	dev->base = ioremap_nocache(res->start, res->end - res->start + 1);
+	dev->base = ioremap_nocache(res->start, resource_size(res));
 	if (unlikely(!dev->base)) {
 		ret = -ENXIO;
 		goto err;
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 8b92a4666e0..e4476743f20 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -756,12 +756,12 @@ static int __devinit iic_probe(struct of_device *ofdev,
 		goto error_cleanup;
 	}
 
-	/* Now register all the child nodes */
-	of_register_i2c_devices(adap, np);
-
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
+	/* Now register all the child nodes */
+	of_register_i2c_devices(adap, np);
+
 	return 0;
 
 error_cleanup:
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 5a4945d1dba..c3869d94ad4 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -469,7 +469,7 @@ mv64xxx_i2c_map_regs(struct platform_device *pd,
 	if (!r)
 		return -ENODEV;
 
-	size = r->end - r->start + 1;
+	size = resource_size(r);
 
 	if (!request_mem_region(r->start, size, drv_data->adapter.name))
 		return -EBUSY;
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 3542c6ba98f..0dabe643ec5 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -234,14 +234,14 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	if (!request_mem_region(res->start, res->end - res->start + 1,
+	if (!request_mem_region(res->start, resource_size(res),
 				pdev->name)) {
 		dev_err(&pdev->dev, "Memory region busy\n");
 		ret = -EBUSY;
 		goto request_mem_failed;
 	}
 
-	i2c->base = ioremap(res->start, res->end - res->start + 1);
+	i2c->base = ioremap(res->start, resource_size(res));
 	if (!i2c->base) {
 		dev_err(&pdev->dev, "Unable to map registers\n");
 		ret = -EIO;
@@ -283,7 +283,7 @@ add_adapter_failed:
 request_irq_failed:
 	iounmap(i2c->base);
 map_failed:
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 request_mem_failed:
 	kfree(i2c);
 
@@ -311,7 +311,7 @@ static int __devexit ocores_i2c_remove(struct platform_device* pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res)
-		release_mem_region(res->start, res->end - res->start + 1);
+		release_mem_region(res->start, resource_size(res));
 
 	kfree(i2c);
 
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index c73475dd0fb..b606db85525 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -828,7 +828,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	dev->idle = 1;
 	dev->dev = &pdev->dev;
 	dev->irq = irq->start;
-	dev->base = ioremap(mem->start, mem->end - mem->start + 1);
+	dev->base = ioremap(mem->start, resource_size(mem));
 	if (!dev->base) {
 		r = -ENOMEM;
 		goto err_free_mem;
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 7b23891b7d5..c4df9d411cd 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -27,8 +27,6 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#define res_len(r)		((r)->end - (r)->start + 1)
-
 struct i2c_pca_pf_data {
 	void __iomem			*reg_base;
 	int				irq;	/* if 0, use polling */
@@ -148,7 +146,7 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
 		goto e_print;
 	}
 
-	if (!request_mem_region(res->start, res_len(res), res->name)) {
+	if (!request_mem_region(res->start, resource_size(res), res->name)) {
 		ret = -ENOMEM;
 		goto e_print;
 	}
@@ -161,13 +159,13 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
 
 	init_waitqueue_head(&i2c->wait);
 
-	i2c->reg_base = ioremap(res->start, res_len(res));
+	i2c->reg_base = ioremap(res->start, resource_size(res));
 	if (!i2c->reg_base) {
 		ret = -ENOMEM;
 		goto e_remap;
 	}
 	i2c->io_base = res->start;
-	i2c->io_size = res_len(res);
+	i2c->io_size = resource_size(res);
 	i2c->irq = irq;
 
 	i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
@@ -250,7 +248,7 @@ e_reqirq:
 e_remap:
 	kfree(i2c);
 e_alloc:
-	release_mem_region(res->start, res_len(res));
+	release_mem_region(res->start, resource_size(res));
 e_print:
 	printk(KERN_ERR "Registering PCA9564/PCA9665 FAILED! (%d)\n", ret);
 	return ret;
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 0bdb2d7f057..7b57d5f267e 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -283,7 +283,7 @@ static int __devinit pmcmsptwi_probe(struct platform_device *pldev)
 	}
 
 	/* reserve the memory region */
-	if (!request_mem_region(res->start, res->end - res->start + 1,
+	if (!request_mem_region(res->start, resource_size(res),
 				pldev->name)) {
 		dev_err(&pldev->dev,
 			"Unable to get memory/io address region 0x%08x\n",
@@ -294,7 +294,7 @@ static int __devinit pmcmsptwi_probe(struct platform_device *pldev)
 
 	/* remap the memory */
 	pmcmsptwi_data.iobase = ioremap_nocache(res->start,
-						res->end - res->start + 1);
+						resource_size(res));
 	if (!pmcmsptwi_data.iobase) {
 		dev_err(&pldev->dev,
 			"Unable to ioremap address 0x%08x\n", res->start);
@@ -360,7 +360,7 @@ ret_unmap:
 	iounmap(pmcmsptwi_data.iobase);
 
 ret_unreserve:
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 
 ret_err:
 	return rc;
@@ -385,7 +385,7 @@ static int __devexit pmcmsptwi_remove(struct platform_device *pldev)
 	iounmap(pmcmsptwi_data.iobase);
 
 	res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index acc7143d965..762e1e53088 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,10 +34,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
+
+/*
+ * I2C register offsets will be shifted 0 or 1 bit left, depending on
+ * different SoCs
+ */
+#define REG_SHIFT_0	(0 << 0)
+#define REG_SHIFT_1	(1 << 0)
+#define REG_SHIFT(d)	((d) & 0x1)
+
+static const struct platform_device_id i2c_pxa_id_table[] = {
+	{ "pxa2xx-i2c",		REG_SHIFT_1 },
+	{ "pxa3xx-pwri2c",	REG_SHIFT_0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
 
 /*
  * I2C registers and bit definitions
@@ -979,12 +993,12 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
 	.functionality	= i2c_pxa_functionality,
 };
 
-#define res_len(r)		((r)->end - (r)->start + 1)
 static int i2c_pxa_probe(struct platform_device *dev)
 {
 	struct pxa_i2c *i2c;
 	struct resource *res;
 	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+	struct platform_device_id *id = platform_get_device_id(dev);
 	int ret;
 	int irq;
 
@@ -993,7 +1007,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	if (res == NULL || irq < 0)
 		return -ENODEV;
 
-	if (!request_mem_region(res->start, res_len(res), res->name))
+	if (!request_mem_region(res->start, resource_size(res), res->name))
 		return -ENOMEM;
 
 	i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
@@ -1023,15 +1037,15 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		goto eclk;
 	}
 
-	i2c->reg_base = ioremap(res->start, res_len(res));
+	i2c->reg_base = ioremap(res->start, resource_size(res));
 	if (!i2c->reg_base) {
 		ret = -EIO;
 		goto eremap;
 	}
-	i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
+	i2c->reg_shift = REG_SHIFT(id->driver_data);
 
 	i2c->iobase = res->start;
-	i2c->iosize = res_len(res);
+	i2c->iosize = resource_size(res);
 
 	i2c->irq = irq;
 
@@ -1095,7 +1109,7 @@ eremap:
 eclk:
 	kfree(i2c);
 emalloc:
-	release_mem_region(res->start, res_len(res));
+	release_mem_region(res->start, resource_size(res));
 	return ret;
 }
 
@@ -1150,6 +1164,7 @@ static struct platform_driver i2c_pxa_driver = {
 		.name	= "pxa2xx-i2c",
 		.owner	= THIS_MODULE,
 	},
+	.id_table	= i2c_pxa_id_table,
 };
 
 static int __init i2c_adap_pxa_init(void)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 079a312d36f..8f42a4536cd 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -828,7 +828,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1,
+	i2c->ioarea = request_mem_region(res->start, resource_size(res),
 					 pdev->name);
 
 	if (i2c->ioarea == NULL) {
@@ -837,7 +837,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	i2c->regs = ioremap(res->start, (res->end-res->start)+1);
+	i2c->regs = ioremap(res->start, resource_size(res));
 
 	if (i2c->regs == NULL) {
 		dev_err(&pdev->dev, "cannot map IO\n");
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
new file mode 100644
index 00000000000..182e711318b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -0,0 +1,1029 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * ST DDC I2C master mode driver, used in e.g. U300 series platforms.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+/* the name of this kernel module */
+#define NAME "stu300"
+
+/* CR (Control Register) 8bit (R/W) */
+#define I2C_CR					(0x00000000)
+#define I2C_CR_RESET_VALUE			(0x00)
+#define I2C_CR_RESET_UMASK			(0x00)
+#define I2C_CR_DDC1_ENABLE			(0x80)
+#define I2C_CR_TRANS_ENABLE			(0x40)
+#define I2C_CR_PERIPHERAL_ENABLE		(0x20)
+#define I2C_CR_DDC2B_ENABLE			(0x10)
+#define I2C_CR_START_ENABLE			(0x08)
+#define I2C_CR_ACK_ENABLE			(0x04)
+#define I2C_CR_STOP_ENABLE			(0x02)
+#define I2C_CR_INTERRUPT_ENABLE			(0x01)
+/* SR1 (Status Register 1) 8bit (R/-) */
+#define I2C_SR1					(0x00000004)
+#define I2C_SR1_RESET_VALUE			(0x00)
+#define I2C_SR1_RESET_UMASK			(0x00)
+#define I2C_SR1_EVF_IND				(0x80)
+#define I2C_SR1_ADD10_IND			(0x40)
+#define I2C_SR1_TRA_IND				(0x20)
+#define I2C_SR1_BUSY_IND			(0x10)
+#define I2C_SR1_BTF_IND				(0x08)
+#define I2C_SR1_ADSL_IND			(0x04)
+#define I2C_SR1_MSL_IND				(0x02)
+#define I2C_SR1_SB_IND				(0x01)
+/* SR2 (Status Register 2) 8bit (R/-) */
+#define I2C_SR2					(0x00000008)
+#define I2C_SR2_RESET_VALUE			(0x00)
+#define I2C_SR2_RESET_UMASK			(0x40)
+#define I2C_SR2_MASK				(0xBF)
+#define I2C_SR2_SCLFAL_IND			(0x80)
+#define I2C_SR2_ENDAD_IND			(0x20)
+#define I2C_SR2_AF_IND				(0x10)
+#define I2C_SR2_STOPF_IND			(0x08)
+#define I2C_SR2_ARLO_IND			(0x04)
+#define I2C_SR2_BERR_IND			(0x02)
+#define I2C_SR2_DDC2BF_IND			(0x01)
+/* CCR (Clock Control Register) 8bit (R/W) */
+#define I2C_CCR					(0x0000000C)
+#define I2C_CCR_RESET_VALUE			(0x00)
+#define I2C_CCR_RESET_UMASK			(0x00)
+#define I2C_CCR_MASK				(0xFF)
+#define I2C_CCR_FMSM				(0x80)
+#define I2C_CCR_CC_MASK				(0x7F)
+/* OAR1 (Own Address Register 1) 8bit (R/W) */
+#define I2C_OAR1				(0x00000010)
+#define I2C_OAR1_RESET_VALUE			(0x00)
+#define I2C_OAR1_RESET_UMASK			(0x00)
+#define I2C_OAR1_ADD_MASK			(0xFF)
+/* OAR2 (Own Address Register 2) 8bit (R/W) */
+#define I2C_OAR2				(0x00000014)
+#define I2C_OAR2_RESET_VALUE			(0x40)
+#define I2C_OAR2_RESET_UMASK			(0x19)
+#define I2C_OAR2_MASK				(0xE6)
+#define I2C_OAR2_FR_25_10MHZ			(0x00)
+#define I2C_OAR2_FR_10_1667MHZ			(0x20)
+#define I2C_OAR2_FR_1667_2667MHZ		(0x40)
+#define I2C_OAR2_FR_2667_40MHZ			(0x60)
+#define I2C_OAR2_FR_40_5333MHZ			(0x80)
+#define I2C_OAR2_FR_5333_66MHZ			(0xA0)
+#define I2C_OAR2_FR_66_80MHZ			(0xC0)
+#define I2C_OAR2_FR_80_100MHZ			(0xE0)
+#define I2C_OAR2_FR_MASK			(0xE0)
+#define I2C_OAR2_ADD_MASK			(0x06)
+/* DR (Data Register) 8bit (R/W) */
+#define I2C_DR					(0x00000018)
+#define I2C_DR_RESET_VALUE			(0x00)
+#define I2C_DR_RESET_UMASK			(0xFF)
+#define I2C_DR_D_MASK				(0xFF)
+/* ECCR (Extended Clock Control Register) 8bit (R/W) */
+#define I2C_ECCR				(0x0000001C)
+#define I2C_ECCR_RESET_VALUE			(0x00)
+#define I2C_ECCR_RESET_UMASK			(0xE0)
+#define I2C_ECCR_MASK				(0x1F)
+#define I2C_ECCR_CC_MASK			(0x1F)
+
+/*
+ * These events are more or less responses to commands
+ * sent into the hardware, presumably reflecting the state
+ * of an internal state machine.
+ */
+enum stu300_event {
+	STU300_EVENT_NONE = 0,
+	STU300_EVENT_1,
+	STU300_EVENT_2,
+	STU300_EVENT_3,
+	STU300_EVENT_4,
+	STU300_EVENT_5,
+	STU300_EVENT_6,
+	STU300_EVENT_7,
+	STU300_EVENT_8,
+	STU300_EVENT_9
+};
+
+enum stu300_error {
+	STU300_ERROR_NONE = 0,
+	STU300_ERROR_ACKNOWLEDGE_FAILURE,
+	STU300_ERROR_BUS_ERROR,
+	STU300_ERROR_ARBITRATION_LOST
+};
+
+/* timeout waiting for the controller to respond */
+#define STU300_TIMEOUT (msecs_to_jiffies(1000))
+
+/*
+ * The number of address send athemps tried before giving up.
+ * If the first one failes it seems like 5 to 8 attempts are required.
+ */
+#define NUM_ADDR_RESEND_ATTEMPTS 10
+
+/* I2C clock speed, in Hz 0-400kHz*/
+static unsigned int scl_frequency = 100000;
+module_param(scl_frequency, uint,  0644);
+
+/**
+ * struct stu300_dev - the stu300 driver state holder
+ * @pdev: parent platform device
+ * @adapter: corresponding I2C adapter
+ * @phybase: location of I/O area in memory
+ * @physize: size of I/O area in memory
+ * @clk: hardware block clock
+ * @irq: assigned interrupt line
+ * @cmd_issue_lock: this locks the following cmd_ variables
+ * @cmd_complete: acknowledge completion for an I2C command
+ * @cmd_event: expected event coming in as a response to a command
+ * @cmd_err: error code as response to a command
+ * @speed: current bus speed in Hz
+ * @msg_index: index of current message
+ * @msg_len: length of current message
+ */
+struct stu300_dev {
+	struct platform_device	*pdev;
+	struct i2c_adapter	adapter;
+	resource_size_t		phybase;
+	resource_size_t		physize;
+	void __iomem		*virtbase;
+	struct clk		*clk;
+	int			irq;
+	spinlock_t		cmd_issue_lock;
+	struct completion	cmd_complete;
+	enum stu300_event	cmd_event;
+	enum stu300_error	cmd_err;
+	unsigned int		speed;
+	int			msg_index;
+	int			msg_len;
+};
+
+/* Local forward function declarations */
+static int stu300_init_hw(struct stu300_dev *dev);
+
+/*
+ * The block needs writes in both MSW and LSW in order
+ * for all data lines to reach their destination.
+ */
+static inline void stu300_wr8(u32 value, void __iomem *address)
+{
+	writel((value << 16) | value, address);
+}
+
+/*
+ * This merely masks off the duplicates which appear
+ * in bytes 1-3. You _MUST_ use 32-bit bus access on this
+ * device, else it will not work.
+ */
+static inline u32 stu300_r8(void __iomem *address)
+{
+	return readl(address) & 0x000000FFU;
+}
+
+/*
+ * Tells whether a certain event or events occurred in
+ * response to a command. The events represent states in
+ * the internal state machine of the hardware. The events
+ * are not very well described in the hardware
+ * documentation and can only be treated as abstract state
+ * machine states.
+ *
+ * @ret 0 = event has not occurred, any other value means
+ * the event occurred.
+ */
+static int stu300_event_occurred(struct stu300_dev *dev,
+				   enum stu300_event mr_event) {
+	u32 status1;
+	u32 status2;
+
+	/* What event happened? */
+	status1 = stu300_r8(dev->virtbase + I2C_SR1);
+	if (!(status1 & I2C_SR1_EVF_IND))
+		/* No event at all */
+		return 0;
+	status2 = stu300_r8(dev->virtbase + I2C_SR2);
+
+	switch (mr_event) {
+	case STU300_EVENT_1:
+		if (status1 & I2C_SR1_ADSL_IND)
+			return 1;
+		break;
+	case STU300_EVENT_2:
+	case STU300_EVENT_3:
+	case STU300_EVENT_7:
+	case STU300_EVENT_8:
+		if (status1 & I2C_SR1_BTF_IND) {
+			if (status2 & I2C_SR2_AF_IND)
+				dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
+			else if (status2 & I2C_SR2_BERR_IND)
+				dev->cmd_err = STU300_ERROR_BUS_ERROR;
+			return 1;
+		}
+		break;
+	case STU300_EVENT_4:
+		if (status2 & I2C_SR2_STOPF_IND)
+			return 1;
+		break;
+	case STU300_EVENT_5:
+		if (status1 & I2C_SR1_SB_IND)
+			/* Clear start bit */
+			return 1;
+		break;
+	case STU300_EVENT_6:
+		if (status2 & I2C_SR2_ENDAD_IND) {
+			/* First check for any errors */
+			if (status2 & I2C_SR2_AF_IND)
+				dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE;
+			return 1;
+		}
+		break;
+	case STU300_EVENT_9:
+		if (status1 & I2C_SR1_ADD10_IND)
+			return 1;
+		break;
+	default:
+		break;
+	}
+	if (status2 & I2C_SR2_ARLO_IND)
+		dev->cmd_err = STU300_ERROR_ARBITRATION_LOST;
+	return 0;
+}
+
+static irqreturn_t stu300_irh(int irq, void *data)
+{
+	struct stu300_dev *dev = data;
+	int res;
+
+	/* See if this was what we were waiting for */
+	spin_lock(&dev->cmd_issue_lock);
+	if (dev->cmd_event != STU300_EVENT_NONE) {
+		res = stu300_event_occurred(dev, dev->cmd_event);
+		if (res || dev->cmd_err != STU300_ERROR_NONE) {
+			u32 val;
+
+			complete(&dev->cmd_complete);
+			/* Block any multiple interrupts */
+			val = stu300_r8(dev->virtbase + I2C_CR);
+			val &= ~I2C_CR_INTERRUPT_ENABLE;
+			stu300_wr8(val, dev->virtbase + I2C_CR);
+		}
+	}
+	spin_unlock(&dev->cmd_issue_lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Sends a command and then waits for the bits masked by *flagmask*
+ * to go high or low by IRQ awaiting.
+ */
+static int stu300_start_and_await_event(struct stu300_dev *dev,
+					  u8 cr_value,
+					  enum stu300_event mr_event)
+{
+	int ret;
+
+	if (unlikely(irqs_disabled())) {
+		/* TODO: implement polling for this case if need be. */
+		WARN(1, "irqs are disabled, cannot poll for event\n");
+		return -EIO;
+	}
+
+	/* Lock command issue, fill in an event we wait for */
+	spin_lock_irq(&dev->cmd_issue_lock);
+	init_completion(&dev->cmd_complete);
+	dev->cmd_err = STU300_ERROR_NONE;
+	dev->cmd_event = mr_event;
+	spin_unlock_irq(&dev->cmd_issue_lock);
+
+	/* Turn on interrupt, send command and wait. */
+	cr_value |= I2C_CR_INTERRUPT_ENABLE;
+	stu300_wr8(cr_value, dev->virtbase + I2C_CR);
+	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
+							STU300_TIMEOUT);
+
+	if (ret < 0) {
+		dev_err(&dev->pdev->dev,
+		       "wait_for_completion_interruptible_timeout() "
+		       "returned %d waiting for event %04x\n", ret, mr_event);
+		return ret;
+	}
+
+	if (ret == 0) {
+		dev_err(&dev->pdev->dev, "controller timed out "
+		       "waiting for event %d, reinit hardware\n", mr_event);
+		(void) stu300_init_hw(dev);
+		return -ETIMEDOUT;
+	}
+
+	if (dev->cmd_err != STU300_ERROR_NONE) {
+		dev_err(&dev->pdev->dev, "controller (start) "
+		       "error %d waiting for event %d, reinit hardware\n",
+		       dev->cmd_err, mr_event);
+		(void) stu300_init_hw(dev);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * This waits for a flag to be set, if it is not set on entry, an interrupt is
+ * configured to wait for the flag using a completion.
+ */
+static int stu300_await_event(struct stu300_dev *dev,
+				enum stu300_event mr_event)
+{
+	int ret;
+	u32 val;
+
+	if (unlikely(irqs_disabled())) {
+		/* TODO: implement polling for this case if need be. */
+		dev_err(&dev->pdev->dev, "irqs are disabled on this "
+			"system!\n");
+		return -EIO;
+	}
+
+	/* Is it already here? */
+	spin_lock_irq(&dev->cmd_issue_lock);
+	dev->cmd_err = STU300_ERROR_NONE;
+	if (stu300_event_occurred(dev, mr_event)) {
+		spin_unlock_irq(&dev->cmd_issue_lock);
+		goto exit_await_check_err;
+	}
+	init_completion(&dev->cmd_complete);
+	dev->cmd_err = STU300_ERROR_NONE;
+	dev->cmd_event = mr_event;
+
+	/* Turn on the I2C interrupt for current operation */
+	val = stu300_r8(dev->virtbase + I2C_CR);
+	val |= I2C_CR_INTERRUPT_ENABLE;
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+
+	/* Twice paranoia (possible HW glitch) */
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+
+	/* Check again: is it already here? */
+	if (unlikely(stu300_event_occurred(dev, mr_event))) {
+		/* Disable IRQ again. */
+		val &= ~I2C_CR_INTERRUPT_ENABLE;
+		stu300_wr8(val, dev->virtbase + I2C_CR);
+		spin_unlock_irq(&dev->cmd_issue_lock);
+		goto exit_await_check_err;
+	}
+
+	/* Unlock the command block and wait for the event to occur */
+	spin_unlock_irq(&dev->cmd_issue_lock);
+	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
+							STU300_TIMEOUT);
+
+	if (ret < 0) {
+		dev_err(&dev->pdev->dev,
+		       "wait_for_completion_interruptible_timeout()"
+		       "returned %d waiting for event %04x\n", ret, mr_event);
+		return ret;
+	}
+
+	if (ret == 0) {
+		if (mr_event != STU300_EVENT_6) {
+			dev_err(&dev->pdev->dev, "controller "
+				"timed out waiting for event %d, reinit "
+				"hardware\n", mr_event);
+			(void) stu300_init_hw(dev);
+		}
+		return -ETIMEDOUT;
+	}
+
+ exit_await_check_err:
+	if (dev->cmd_err != STU300_ERROR_NONE) {
+		if (mr_event != STU300_EVENT_6) {
+			dev_err(&dev->pdev->dev, "controller "
+				"error (await_event) %d waiting for event %d, "
+			       "reinit hardware\n", dev->cmd_err, mr_event);
+			(void) stu300_init_hw(dev);
+		}
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * Waits for the busy bit to go low by repeated polling.
+ */
+#define BUSY_RELEASE_ATTEMPTS 10
+static int stu300_wait_while_busy(struct stu300_dev *dev)
+{
+	unsigned long timeout;
+	int i;
+
+	for (i = 0; i < BUSY_RELEASE_ATTEMPTS; i++) {
+		timeout = jiffies + STU300_TIMEOUT;
+
+		while (!time_after(jiffies, timeout)) {
+			/* Is not busy? */
+			if ((stu300_r8(dev->virtbase + I2C_SR1) &
+			     I2C_SR1_BUSY_IND) == 0)
+				return 0;
+			msleep(1);
+		}
+
+		dev_err(&dev->pdev->dev, "transaction timed out "
+			"waiting for device to be free (not busy). "
+		       "Attempt: %d\n", i+1);
+
+		dev_err(&dev->pdev->dev, "base address = "
+			"0x%08x, reinit hardware\n", (u32) dev->virtbase);
+
+		(void) stu300_init_hw(dev);
+	}
+
+	dev_err(&dev->pdev->dev, "giving up after %d attempts "
+		"to reset the bus.\n",  BUSY_RELEASE_ATTEMPTS);
+
+	return -ETIMEDOUT;
+}
+
+struct stu300_clkset {
+	unsigned long rate;
+	u32 setting;
+};
+
+static const struct stu300_clkset stu300_clktable[] = {
+	{ 0, 0xFFU },
+	{ 2500000, I2C_OAR2_FR_25_10MHZ },
+	{ 10000000, I2C_OAR2_FR_10_1667MHZ },
+	{ 16670000, I2C_OAR2_FR_1667_2667MHZ },
+	{ 26670000, I2C_OAR2_FR_2667_40MHZ },
+	{ 40000000, I2C_OAR2_FR_40_5333MHZ },
+	{ 53330000, I2C_OAR2_FR_5333_66MHZ },
+	{ 66000000, I2C_OAR2_FR_66_80MHZ },
+	{ 80000000, I2C_OAR2_FR_80_100MHZ },
+	{ 100000000, 0xFFU },
+};
+
+static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
+{
+
+	u32 val;
+	int i = 0;
+
+	/* Locate the apropriate clock setting */
+	while (i < ARRAY_SIZE(stu300_clktable) &&
+	       stu300_clktable[i].rate < clkrate)
+		i++;
+
+	if (stu300_clktable[i].setting == 0xFFU) {
+		dev_err(&dev->pdev->dev, "too %s clock rate requested "
+			"(%lu Hz).\n", i ? "high" : "low", clkrate);
+		return -EINVAL;
+	}
+
+	stu300_wr8(stu300_clktable[i].setting,
+		   dev->virtbase + I2C_OAR2);
+
+	dev_dbg(&dev->pdev->dev, "Clock rate %lu Hz, I2C bus speed %d Hz "
+		"virtbase %p\n", clkrate, dev->speed, dev->virtbase);
+
+	if (dev->speed > 100000)
+		/* Fast Mode I2C */
+		val = ((clkrate/dev->speed)-9)/3;
+	else
+		/* Standard Mode I2C */
+		val = ((clkrate/dev->speed)-7)/2;
+
+	/* According to spec the divider must be > 2 */
+	if (val < 0x002) {
+		dev_err(&dev->pdev->dev, "too low clock rate (%lu Hz).\n",
+			clkrate);
+		return -EINVAL;
+	}
+
+	/* We have 12 bits clock divider only! */
+	if (val & 0xFFFFF000U) {
+		dev_err(&dev->pdev->dev, "too high clock rate (%lu Hz).\n",
+			clkrate);
+		return -EINVAL;
+	}
+
+	if (dev->speed > 100000) {
+		/* CC6..CC0 */
+		stu300_wr8((val & I2C_CCR_CC_MASK) | I2C_CCR_FMSM,
+			   dev->virtbase + I2C_CCR);
+		dev_dbg(&dev->pdev->dev, "set clock divider to 0x%08x, "
+			"Fast Mode I2C\n", val);
+	} else {
+		/* CC6..CC0 */
+		stu300_wr8((val & I2C_CCR_CC_MASK),
+			   dev->virtbase + I2C_CCR);
+		dev_dbg(&dev->pdev->dev, "set clock divider to "
+			"0x%08x, Standard Mode I2C\n", val);
+	}
+
+	/* CC11..CC7 */
+	stu300_wr8(((val >> 7) & 0x1F),
+		   dev->virtbase + I2C_ECCR);
+
+	return 0;
+}
+
+
+static int stu300_init_hw(struct stu300_dev *dev)
+{
+	u32 dummy;
+	unsigned long clkrate;
+	int ret;
+
+	/* Disable controller */
+	stu300_wr8(0x00, dev->virtbase + I2C_CR);
+	/*
+	 * Set own address to some default value (0x00).
+	 * We do not support slave mode anyway.
+	 */
+	stu300_wr8(0x00, dev->virtbase + I2C_OAR1);
+	/*
+	 * The I2C controller only operates properly in 26 MHz but we
+	 * program this driver as if we didn't know. This will also set the two
+	 * high bits of the own address to zero as well.
+	 * There is no known hardware issue with running in 13 MHz
+	 * However, speeds over 200 kHz are not used.
+	 */
+	clkrate = clk_get_rate(dev->clk);
+	ret = stu300_set_clk(dev, clkrate);
+	if (ret)
+		return ret;
+	/*
+	 * Enable block, do it TWICE (hardware glitch)
+	 * Setting bit 7 can enable DDC mode. (Not used currently.)
+	 */
+	stu300_wr8(I2C_CR_PERIPHERAL_ENABLE,
+				  dev->virtbase + I2C_CR);
+	stu300_wr8(I2C_CR_PERIPHERAL_ENABLE,
+				  dev->virtbase + I2C_CR);
+	/* Make a dummy read of the status register SR1 & SR2 */
+	dummy = stu300_r8(dev->virtbase + I2C_SR2);
+	dummy = stu300_r8(dev->virtbase + I2C_SR1);
+
+	return 0;
+}
+
+
+
+/* Send slave address. */
+static int stu300_send_address(struct stu300_dev *dev,
+				 struct i2c_msg *msg, int resend)
+{
+	u32 val;
+	int ret;
+
+	if (msg->flags & I2C_M_TEN)
+		/* This is probably how 10 bit addresses look */
+		val = (0xf0 | (((u32) msg->addr & 0x300) >> 7)) &
+			I2C_DR_D_MASK;
+	else
+		val = ((msg->addr << 1) & I2C_DR_D_MASK);
+
+	if (msg->flags & I2C_M_RD) {
+		/* This is the direction bit */
+		val |= 0x01;
+		if (resend)
+			dev_dbg(&dev->pdev->dev, "read resend\n");
+	} else if (resend)
+		dev_dbg(&dev->pdev->dev, "write resend\n");
+	stu300_wr8(val, dev->virtbase + I2C_DR);
+
+	/* For 10bit addressing, await 10bit request (EVENT 9) */
+	if (msg->flags & I2C_M_TEN) {
+		ret = stu300_await_event(dev, STU300_EVENT_9);
+		/*
+		 * The slave device wants a 10bit address, send the rest
+		 * of the bits (the LSBits)
+		 */
+		val = msg->addr & I2C_DR_D_MASK;
+		/* This clears "event 9" */
+		stu300_wr8(val, dev->virtbase + I2C_DR);
+		if (ret != 0)
+			return ret;
+	}
+	/* FIXME: Why no else here? two events for 10bit?
+	 * Await event 6 (normal) or event 9 (10bit)
+	 */
+
+	if (resend)
+		dev_dbg(&dev->pdev->dev, "await event 6\n");
+	ret = stu300_await_event(dev, STU300_EVENT_6);
+
+	/*
+	 * Clear any pending EVENT 6 no matter what happend during
+	 * await_event.
+	 */
+	val = stu300_r8(dev->virtbase + I2C_CR);
+	val |= I2C_CR_PERIPHERAL_ENABLE;
+	stu300_wr8(val, dev->virtbase + I2C_CR);
+
+	return ret;
+}
+
+static int stu300_xfer_msg(struct i2c_adapter *adap,
+			     struct i2c_msg *msg, int stop)
+{
+	u32 cr;
+	u32 val;
+	u32 i;
+	int ret;
+	int attempts = 0;
+	struct stu300_dev *dev = i2c_get_adapdata(adap);
+
+
+	clk_enable(dev->clk);
+
+	/* Remove this if (0) to trace each and every message. */
+	if (0) {
+		dev_dbg(&dev->pdev->dev, "I2C message to: 0x%04x, len: %d, "
+			"flags: 0x%04x, stop: %d\n",
+			msg->addr, msg->len, msg->flags, stop);
+	}
+
+	/* Zero-length messages are not supported by this hardware */
+	if (msg->len == 0) {
+		ret = -EINVAL;
+		goto exit_disable;
+	}
+
+	/*
+	 * For some reason, sending the address sometimes fails when running
+	 * on  the 13 MHz clock. No interrupt arrives. This is a work around,
+	 * which tries to restart and send the address up to 10 times before
+	 * really giving up. Usually 5 to 8 attempts are enough.
+	 */
+	do {
+		if (attempts)
+			dev_dbg(&dev->pdev->dev, "wait while busy\n");
+		/* Check that the bus is free, or wait until some timeout */
+		ret = stu300_wait_while_busy(dev);
+		if (ret != 0)
+			goto exit_disable;
+
+		if (attempts)
+			dev_dbg(&dev->pdev->dev, "re-int hw\n");
+		/*
+		 * According to ST, there is no problem if the clock is
+		 * changed between 13 and 26 MHz during a transfer.
+		 */
+		ret = stu300_init_hw(dev);
+		if (ret)
+			goto exit_disable;
+
+		/* Send a start condition */
+		cr = I2C_CR_PERIPHERAL_ENABLE;
+		/* Setting the START bit puts the block in master mode */
+		if (!(msg->flags & I2C_M_NOSTART))
+			cr |= I2C_CR_START_ENABLE;
+		if ((msg->flags & I2C_M_RD) && (msg->len > 1))
+			/* On read more than 1 byte, we need ack. */
+			cr |= I2C_CR_ACK_ENABLE;
+		/* Check that it gets through */
+		if (!(msg->flags & I2C_M_NOSTART)) {
+			if (attempts)
+				dev_dbg(&dev->pdev->dev, "send start event\n");
+			ret = stu300_start_and_await_event(dev, cr,
+							     STU300_EVENT_5);
+		}
+
+		if (attempts)
+			dev_dbg(&dev->pdev->dev, "send address\n");
+
+		if (ret == 0)
+			/* Send address */
+			ret = stu300_send_address(dev, msg, attempts != 0);
+
+		if (ret != 0) {
+			attempts++;
+			dev_dbg(&dev->pdev->dev, "failed sending address, "
+				"retrying. Attempt: %d msg_index: %d/%d\n",
+			       attempts, dev->msg_index, dev->msg_len);
+		}
+
+	} while (ret != 0 && attempts < NUM_ADDR_RESEND_ATTEMPTS);
+
+	if (attempts < NUM_ADDR_RESEND_ATTEMPTS && attempts > 0) {
+		dev_dbg(&dev->pdev->dev, "managed to get address "
+		       "through after %d attempts\n", attempts);
+	} else if (attempts == NUM_ADDR_RESEND_ATTEMPTS) {
+		dev_dbg(&dev->pdev->dev, "I give up, tried %d times "
+		       "to resend address.\n",
+		       NUM_ADDR_RESEND_ATTEMPTS);
+		goto exit_disable;
+	}
+
+	if (msg->flags & I2C_M_RD) {
+		/* READ: we read the actual bytes one at a time */
+		for (i = 0; i < msg->len; i++) {
+			if (i == msg->len-1) {
+				/*
+				 * Disable ACK and set STOP condition before
+				 * reading last byte
+				 */
+				val = I2C_CR_PERIPHERAL_ENABLE;
+
+				if (stop)
+					val |= I2C_CR_STOP_ENABLE;
+
+				stu300_wr8(val,
+					   dev->virtbase + I2C_CR);
+			}
+			/* Wait for this byte... */
+			ret = stu300_await_event(dev, STU300_EVENT_7);
+			if (ret != 0)
+				goto exit_disable;
+			/* This clears event 7 */
+			msg->buf[i] = (u8) stu300_r8(dev->virtbase + I2C_DR);
+		}
+	} else {
+		/* WRITE: we send the actual bytes one at a time */
+		for (i = 0; i < msg->len; i++) {
+			/* Write the byte */
+			stu300_wr8(msg->buf[i],
+				   dev->virtbase + I2C_DR);
+			/* Check status */
+			ret = stu300_await_event(dev, STU300_EVENT_8);
+			/* Next write to DR will clear event 8 */
+			if (ret != 0) {
+				dev_err(&dev->pdev->dev, "error awaiting "
+				       "event 8 (%d)\n", ret);
+				goto exit_disable;
+			}
+		}
+		/* Check NAK */
+		if (!(msg->flags & I2C_M_IGNORE_NAK)) {
+			if (stu300_r8(dev->virtbase + I2C_SR2) &
+			    I2C_SR2_AF_IND) {
+				dev_err(&dev->pdev->dev, "I2C payload "
+				       "send returned NAK!\n");
+				ret = -EIO;
+				goto exit_disable;
+			}
+		}
+		if (stop) {
+			/* Send stop condition */
+			val = I2C_CR_PERIPHERAL_ENABLE;
+			val |= I2C_CR_STOP_ENABLE;
+			stu300_wr8(val, dev->virtbase + I2C_CR);
+		}
+	}
+
+	/* Check that the bus is free, or wait until some timeout occurs */
+	ret = stu300_wait_while_busy(dev);
+	if (ret != 0) {
+		dev_err(&dev->pdev->dev, "timout waiting for transfer "
+		       "to commence.\n");
+		goto exit_disable;
+	}
+
+	/* Dummy read status registers */
+	val = stu300_r8(dev->virtbase + I2C_SR2);
+	val = stu300_r8(dev->virtbase + I2C_SR1);
+	ret = 0;
+
+ exit_disable:
+	/* Disable controller */
+	stu300_wr8(0x00, dev->virtbase + I2C_CR);
+	clk_disable(dev->clk);
+	return ret;
+}
+
+static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			 int num)
+{
+	int ret = -1;
+	int i;
+	struct stu300_dev *dev = i2c_get_adapdata(adap);
+	dev->msg_len = num;
+	for (i = 0; i < num; i++) {
+		/*
+		 * Another driver appears to send stop for each message,
+		 * here we only do that for the last message. Possibly some
+		 * peripherals require this behaviour, then their drivers
+		 * have to send single messages in order to get "stop" for
+		 * each message.
+		 */
+		dev->msg_index = i;
+
+		ret = stu300_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+		if (ret != 0) {
+			num = ret;
+			break;
+		}
+	}
+
+	return num;
+}
+
+static u32 stu300_func(struct i2c_adapter *adap)
+{
+	/* This is the simplest thing you can think of... */
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm stu300_algo = {
+	.master_xfer	= stu300_xfer,
+	.functionality	= stu300_func,
+};
+
+static int __init
+stu300_probe(struct platform_device *pdev)
+{
+	struct stu300_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	int bus_nr;
+	int ret = 0;
+
+	dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL);
+	if (!dev) {
+		dev_err(&pdev->dev, "could not allocate device struct\n");
+		ret = -ENOMEM;
+		goto err_no_devmem;
+	}
+
+	bus_nr = pdev->id;
+	dev->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk)) {
+		ret = PTR_ERR(dev->clk);
+		dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
+		goto err_no_clk;
+	}
+
+	dev->pdev = pdev;
+	platform_set_drvdata(pdev, dev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENOENT;
+		goto err_no_resource;
+	}
+
+	dev->phybase = res->start;
+	dev->physize = resource_size(res);
+
+	if (request_mem_region(dev->phybase, dev->physize,
+			       NAME " I/O Area") == NULL) {
+		ret = -EBUSY;
+		goto err_no_ioregion;
+	}
+
+	dev->virtbase = ioremap(dev->phybase, dev->physize);
+	dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
+		"base %p\n", bus_nr, dev->virtbase);
+	if (!dev->virtbase) {
+		ret = -ENOMEM;
+		goto err_no_ioremap;
+	}
+
+	dev->irq = platform_get_irq(pdev, 0);
+	if (request_irq(dev->irq, stu300_irh, IRQF_DISABLED,
+			NAME, dev)) {
+		ret = -EIO;
+		goto err_no_irq;
+	}
+
+	dev->speed = scl_frequency;
+
+	clk_enable(dev->clk);
+	ret = stu300_init_hw(dev);
+	clk_disable(dev->clk);
+
+	if (ret != 0) {
+		dev_err(&dev->pdev->dev, "error initializing hardware.\n");
+		goto err_init_hw;
+	}
+
+	/* IRQ event handling initialization */
+	spin_lock_init(&dev->cmd_issue_lock);
+	dev->cmd_event = STU300_EVENT_NONE;
+	dev->cmd_err = STU300_ERROR_NONE;
+
+	adap = &dev->adapter;
+	adap->owner = THIS_MODULE;
+	/* DDC class but actually often used for more generic I2C */
+	adap->class = I2C_CLASS_DDC;
+	strncpy(adap->name, "ST Microelectronics DDC I2C adapter",
+		sizeof(adap->name));
+	adap->nr = bus_nr;
+	adap->algo = &stu300_algo;
+	adap->dev.parent = &pdev->dev;
+	i2c_set_adapdata(adap, dev);
+
+	/* i2c device drivers may be active on return from add_adapter() */
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret) {
+		dev_err(&dev->pdev->dev, "failure adding ST Micro DDC "
+		       "I2C adapter\n");
+		goto err_add_adapter;
+	}
+	return 0;
+
+ err_add_adapter:
+ err_init_hw:
+	free_irq(dev->irq, dev);
+ err_no_irq:
+	iounmap(dev->virtbase);
+ err_no_ioremap:
+	release_mem_region(dev->phybase, dev->physize);
+ err_no_ioregion:
+	platform_set_drvdata(pdev, NULL);
+ err_no_resource:
+	clk_put(dev->clk);
+ err_no_clk:
+	kfree(dev);
+ err_no_devmem:
+	dev_err(&pdev->dev, "failed to add " NAME " adapter: %d\n",
+		pdev->id);
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int stu300_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct stu300_dev *dev = platform_get_drvdata(pdev);
+
+	/* Turn off everything */
+	stu300_wr8(0x00, dev->virtbase + I2C_CR);
+	return 0;
+}
+
+static int stu300_resume(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct stu300_dev *dev = platform_get_drvdata(pdev);
+
+	clk_enable(dev->clk);
+	ret = stu300_init_hw(dev);
+	clk_disable(dev->clk);
+
+	if (ret != 0)
+		dev_err(&pdev->dev, "error re-initializing hardware.\n");
+	return ret;
+}
+#else
+#define stu300_suspend NULL
+#define stu300_resume NULL
+#endif
+
+static int __exit
+stu300_remove(struct platform_device *pdev)
+{
+	struct stu300_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+	/* Turn off everything */
+	stu300_wr8(0x00, dev->virtbase + I2C_CR);
+	free_irq(dev->irq, dev);
+	iounmap(dev->virtbase);
+	release_mem_region(dev->phybase, dev->physize);
+	clk_put(dev->clk);
+	platform_set_drvdata(pdev, NULL);
+	kfree(dev);
+	return 0;
+}
+
+static struct platform_driver stu300_i2c_driver = {
+	.driver = {
+		.name	= NAME,
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __exit_p(stu300_remove),
+	.suspend        = stu300_suspend,
+	.resume         = stu300_resume,
+
+};
+
+static int __init stu300_init(void)
+{
+	return platform_driver_probe(&stu300_i2c_driver, stu300_probe);
+}
+
+static void __exit stu300_exit(void)
+{
+	platform_driver_unregister(&stu300_i2c_driver);
+}
+
+/*
+ * The systems using this bus often have very basic devices such
+ * as regulators on the I2C bus, so this needs to be loaded early.
+ * Therefore it is registered in the subsys_initcall().
+ */
+subsys_initcall(stu300_init);
+module_exit(stu300_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("ST Micro DDC I2C adapter (" NAME ")");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" NAME);
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index fede619ba22..70de8216346 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -76,7 +76,7 @@ static int i2c_versatile_probe(struct platform_device *dev)
 		goto err_out;
 	}
 
-	if (!request_mem_region(r->start, r->end - r->start + 1, "versatile-i2c")) {
+	if (!request_mem_region(r->start, resource_size(r), "versatile-i2c")) {
 		ret = -EBUSY;
 		goto err_out;
 	}
@@ -87,7 +87,7 @@ static int i2c_versatile_probe(struct platform_device *dev)
 		goto err_release;
 	}
 
-	i2c->base = ioremap(r->start, r->end - r->start + 1);
+	i2c->base = ioremap(r->start, resource_size(r));
 	if (!i2c->base) {
 		ret = -ENOMEM;
 		goto err_free;
@@ -118,7 +118,7 @@ static int i2c_versatile_probe(struct platform_device *dev)
  err_free:
 	kfree(i2c);
  err_release:
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
  err_out:
 	return ret;
 }
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 02e6f724b05..54d810a4d00 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -37,6 +37,7 @@
    VT8251             0x3287             yes
    CX700              0x8324             yes
    VX800/VX820        0x8353             yes
+   VX855/VX875        0x8409             yes
 
    Note: we assume there can only be one device, with one SMBus interface.
 */
@@ -404,6 +405,7 @@ found:
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_VIA_CX700:
 	case PCI_DEVICE_ID_VIA_VX800:
+	case PCI_DEVICE_ID_VIA_VX855:
 	case PCI_DEVICE_ID_VIA_8251:
 	case PCI_DEVICE_ID_VIA_8237:
 	case PCI_DEVICE_ID_VIA_8237A:
@@ -469,6 +471,8 @@ static struct pci_device_id vt596_ids[] = {
 	  .driver_data = SMBBA3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
 	  .driver_data = SMBBA3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855),
+	  .driver_data = SMBBA3 },
 	{ 0, }
 };
 
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1a474acc0dd..7663d57833a 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
 
 static struct i2c_adapter voodoo3_i2c_adapter = {
 	.owner		= THIS_MODULE,
-	.class		= I2C_CLASS_TV_ANALOG, 
 	.name		= "I2C Voodoo3/Banshee adapter",
 	.algo_data	= &voo_i2c_bit_data,
 };
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 8f8c81eb0ae..02d746c9c47 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -64,21 +64,6 @@ config SENSORS_PCA9539
 	  This driver is deprecated and will be dropped soon. Use
 	  drivers/gpio/pca953x.c instead.
 
-config SENSORS_MAX6875
-	tristate "Maxim MAX6875 Power supply supervisor"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get support for the Maxim MAX6875
-	  EEPROM-programmable, quad power-supply sequencer/supervisor.
-
-	  This provides an interface to program the EEPROM and reset the chip.
-
-	  This driver also supports the Maxim MAX6874 hex power-supply
-	  sequencer/supervisor if found at a compatible address.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called max6875.
-
 config SENSORS_TSL2550
 	tristate "Taos TSL2550 ambient light sensor"
 	depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 55a37603718..f4680d16ee3 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,7 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 85e2e919d1c..5ed622ee65c 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -29,7 +29,6 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/idr.h>
-#include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
@@ -451,16 +450,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 	mutex_lock(&core_lock);
 
-	/* Add the adapter to the driver core.
-	 * If the parent pointer is not set up,
-	 * we add this adapter to the host bus.
-	 */
-	if (adap->dev.parent == NULL) {
-		adap->dev.parent = &platform_bus;
-		pr_debug("I2C adapter driver [%s] forgot to specify "
-			 "physical device\n", adap->name);
-	}
-
 	/* Set default timeout to 1 second if not already set */
 	if (adap->timeout == 0)
 		adap->timeout = HZ;
@@ -1022,7 +1011,8 @@ module_exit(i2c_exit);
  */
 int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 {
-	int ret;
+	unsigned long orig_jiffies;
+	int ret, try;
 
 	/* REVISIT the fault reporting model here is weak:
 	 *
@@ -1060,7 +1050,15 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			mutex_lock_nested(&adap->bus_lock, adap->level);
 		}
 
-		ret = adap->algo->master_xfer(adap,msgs,num);
+		/* Retry automatically on arbitration loss */
+		orig_jiffies = jiffies;
+		for (ret = 0, try = 0; try <= adap->retries; try++) {
+			ret = adap->algo->master_xfer(adap, msgs, num);
+			if (ret != -EAGAIN)
+				break;
+			if (time_after(jiffies, orig_jiffies + adap->timeout))
+				break;
+		}
 		mutex_unlock(&adap->bus_lock);
 
 		return ret;
@@ -1509,7 +1507,7 @@ struct i2c_adapter* i2c_get_adapter(int id)
 	struct i2c_adapter *adapter;
 
 	mutex_lock(&core_lock);
-	adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
+	adapter = idr_find(&i2c_adapter_idr, id);
 	if (adapter && !try_module_get(adapter->owner))
 		adapter = NULL;
 
@@ -1995,14 +1993,27 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 		   char read_write, u8 command, int protocol,
 		   union i2c_smbus_data *data)
 {
+	unsigned long orig_jiffies;
+	int try;
 	s32 res;
 
 	flags &= I2C_M_TEN | I2C_CLIENT_PEC;
 
 	if (adapter->algo->smbus_xfer) {
 		mutex_lock(&adapter->bus_lock);
-		res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write,
-						command, protocol, data);
+
+		/* Retry automatically on arbitration loss */
+		orig_jiffies = jiffies;
+		for (res = 0, try = 0; try <= adapter->retries; try++) {
+			res = adapter->algo->smbus_xfer(adapter, addr, flags,
+							read_write, command,
+							protocol, data);
+			if (res != -EAGAIN)
+				break;
+			if (time_after(jiffies,
+				       orig_jiffies + adapter->timeout))
+				break;
+		}
 		mutex_unlock(&adapter->bus_lock);
 	} else
 		res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf06494bb74..9a5d0aaac9d 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -46,7 +46,7 @@ menuconfig IDE
 	  SMART parameters from disk drives.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ide-core.ko.
+	  module will be called ide-core.
 
 	  For further information, please read <file:Documentation/ide/ide.txt>.
 
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index bbdd2547f12..702ef64a0f1 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -577,7 +577,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 
 		/*
 		 * If necessary schedule the packet transfer to occur 'timeout'
-		 * miliseconds later in ide_delayed_transfer_pc() after the
+		 * milliseconds later in ide_delayed_transfer_pc() after the
 		 * device says it's ready for a packet.
 		 */
 		if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index ba1488bd843..c14ca144cff 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -3,7 +3,8 @@
 
 int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 {
-	ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
+	ide_drive_t *drive = dev_get_drvdata(dev);
+	ide_drive_t *pair = ide_get_pair_dev(drive);
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq;
 	struct request_pm_state rqpm;
@@ -34,7 +35,8 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg)
 
 int generic_ide_resume(struct device *dev)
 {
-	ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
+	ide_drive_t *drive = dev_get_drvdata(dev);
+	ide_drive_t *pair = ide_get_pair_dev(drive);
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq;
 	struct request_pm_state rqpm;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index f371b0de314..79e0af3fd15 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -535,7 +535,7 @@ static int ide_register_port(ide_hwif_t *hwif)
 
 	/* register with global device tree */
 	dev_set_name(&hwif->gendev, hwif->name);
-	hwif->gendev.driver_data = hwif;
+	dev_set_drvdata(&hwif->gendev, hwif);
 	if (hwif->gendev.parent == NULL)
 		hwif->gendev.parent = hwif->dev;
 	hwif->gendev.release = hwif_release_dev;
@@ -987,9 +987,9 @@ static void hwif_register_devices(ide_hwif_t *hwif)
 		int ret;
 
 		dev_set_name(dev, "%u.%u", hwif->index, i);
+		dev_set_drvdata(dev, drive);
 		dev->parent = &hwif->gendev;
 		dev->bus = &ide_bus_type;
-		dev->driver_data = drive;
 		dev->release = drive_release_dev;
 
 		ret = device_register(dev);
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index ee9b55ecc62..b579fbe8837 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -112,7 +112,7 @@ out:
 
 static int __devexit plat_ide_remove(struct platform_device *pdev)
 {
-	struct ide_host *host = pdev->dev.driver_data;
+	struct ide_host *host = dev_get_drvdata(&pdev->dev);
 
 	ide_host_remove(host);
 
diff --git a/drivers/ieee1394/csr1212.c b/drivers/ieee1394/csr1212.c
index a6dfeb0b337..e76cac64c53 100644
--- a/drivers/ieee1394/csr1212.c
+++ b/drivers/ieee1394/csr1212.c
@@ -35,6 +35,7 @@
 
 #include <linux/errno.h>
 #include <linux/kernel.h>
+#include <linux/kmemcheck.h>
 #include <linux/string.h>
 #include <asm/bug.h>
 #include <asm/byteorder.h>
@@ -387,6 +388,7 @@ csr1212_new_descriptor_leaf(u8 dtype, u32 specifier_id,
 	if (!kv)
 		return NULL;
 
+	kmemcheck_annotate_variable(kv->value.leaf.data[0]);
 	CSR1212_DESCRIPTOR_LEAF_SET_TYPE(kv, dtype);
 	CSR1212_DESCRIPTOR_LEAF_SET_SPECIFIER_ID(kv, specifier_id);
 
diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c
index 4ca103577c0..f5c586c2bba 100644
--- a/drivers/ieee1394/eth1394.c
+++ b/drivers/ieee1394/eth1394.c
@@ -361,7 +361,7 @@ static int eth1394_new_node(struct eth1394_host_info *hi,
 	node_info->pdg.sz = 0;
 	node_info->fifo = CSR1212_INVALID_ADDR_SPACE;
 
-	ud->device.driver_data = node_info;
+	dev_set_drvdata(&ud->device, node_info);
 	new_node->ud = ud;
 
 	priv = netdev_priv(hi->dev);
@@ -406,7 +406,7 @@ static int eth1394_remove(struct device *dev)
 	list_del(&old_node->list);
 	kfree(old_node);
 
-	node_info = (struct eth1394_node_info*)ud->device.driver_data;
+	node_info = dev_get_drvdata(&ud->device);
 
 	spin_lock_irqsave(&node_info->pdg.lock, flags);
 	/* The partial datagram list should be empty, but we'll just
@@ -416,7 +416,7 @@ static int eth1394_remove(struct device *dev)
 	spin_unlock_irqrestore(&node_info->pdg.lock, flags);
 
 	kfree(node_info);
-	ud->device.driver_data = NULL;
+	dev_set_drvdata(&ud->device, NULL);
 	return 0;
 }
 
@@ -688,7 +688,7 @@ static void ether1394_host_reset(struct hpsb_host *host)
 	ether1394_reset_priv(dev, 0);
 
 	list_for_each_entry(node, &priv->ip_node_list, list) {
-		node_info = node->ud->device.driver_data;
+		node_info = dev_get_drvdata(&node->ud->device);
 
 		spin_lock_irqsave(&node_info->pdg.lock, flags);
 
@@ -872,8 +872,7 @@ static __be16 ether1394_parse_encap(struct sk_buff *skb, struct net_device *dev,
 		if (!node)
 			return cpu_to_be16(0);
 
-		node_info =
-		    (struct eth1394_node_info *)node->ud->device.driver_data;
+		node_info = dev_get_drvdata(&node->ud->device);
 
 		/* Update our speed/payload/fifo_offset table */
 		node_info->maxpayload =	maxpayload;
@@ -1080,7 +1079,7 @@ static int ether1394_data_handler(struct net_device *dev, int srcid, int destid,
 		priv->ud_list[NODEID_TO_NODE(srcid)] = ud;
 	}
 
-	node_info = (struct eth1394_node_info *)ud->device.driver_data;
+	node_info = dev_get_drvdata(&ud->device);
 
 	/* First, did we receive a fragmented or unfragmented datagram? */
 	hdr->words.word1 = ntohs(hdr->words.word1);
@@ -1617,8 +1616,7 @@ static int ether1394_tx(struct sk_buff *skb, struct net_device *dev)
 		if (!node)
 			goto fail;
 
-		node_info =
-		    (struct eth1394_node_info *)node->ud->device.driver_data;
+		node_info = dev_get_drvdata(&node->ud->device);
 		if (node_info->fifo == CSR1212_INVALID_ADDR_SPACE)
 			goto fail;
 
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index a6d55bebe61..5122b5a8aa2 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -10,6 +10,7 @@
 
 #include <linux/bitmap.h>
 #include <linux/kernel.h>
+#include <linux/kmemcheck.h>
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -39,7 +40,10 @@ struct nodemgr_csr_info {
 	struct hpsb_host *host;
 	nodeid_t nodeid;
 	unsigned int generation;
+
+	kmemcheck_bitfield_begin(flags);
 	unsigned int speed_unverified:1;
+	kmemcheck_bitfield_end(flags);
 };
 
 
@@ -1293,6 +1297,7 @@ static void nodemgr_node_scan_one(struct hpsb_host *host,
 	u8 *speed;
 
 	ci = kmalloc(sizeof(*ci), GFP_KERNEL);
+	kmemcheck_annotate_bitfield(ci, flags);
 	if (!ci)
 		return;
 
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index a51ab233342..83b734aec92 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -718,7 +718,7 @@ static int sbp2_remove(struct device *dev)
 	struct scsi_device *sdev;
 
 	ud = container_of(dev, struct unit_directory, device);
-	lu = ud->device.driver_data;
+	lu = dev_get_drvdata(&ud->device);
 	if (!lu)
 		return 0;
 
@@ -746,7 +746,7 @@ static int sbp2_remove(struct device *dev)
 
 static int sbp2_update(struct unit_directory *ud)
 {
-	struct sbp2_lu *lu = ud->device.driver_data;
+	struct sbp2_lu *lu = dev_get_drvdata(&ud->device);
 
 	if (sbp2_reconnect_device(lu) != 0) {
 		/*
@@ -815,7 +815,7 @@ static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *ud)
 	atomic_set(&lu->state, SBP2LU_STATE_RUNNING);
 	INIT_WORK(&lu->protocol_work, NULL);
 
-	ud->device.driver_data = lu;
+	dev_set_drvdata(&ud->device, lu);
 
 	hi = hpsb_get_hostinfo(&sbp2_highlevel, ud->ne->host);
 	if (!hi) {
@@ -1051,7 +1051,7 @@ static void sbp2_remove_device(struct sbp2_lu *lu)
 		hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
 					  lu->status_fifo_addr);
 
-	lu->ud->device.driver_data = NULL;
+	dev_set_drvdata(&lu->ud->device, NULL);
 
 	module_put(hi->host->driver->owner);
 no_hi:
diff --git a/drivers/ieee802154/Kconfig b/drivers/ieee802154/Kconfig
new file mode 100644
index 00000000000..9b9f43aa2f8
--- /dev/null
+++ b/drivers/ieee802154/Kconfig
@@ -0,0 +1,22 @@
+menuconfig IEEE802154_DRIVERS
+	tristate "IEEE 802.15.4 drivers"
+	depends on NETDEVICES && IEEE802154
+	default y
+	---help---
+	  Say Y here to get to see options for IEEE 802.15.4 Low-Rate
+	  Wireless Personal Area Network device drivers. This option alone
+	  does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and
+	  disabled.
+
+config IEEE802154_FAKEHARD
+	tristate "Fake LR-WPAN driver with several interconnected devices"
+	depends on  IEEE802154_DRIVERS
+	---help---
+	  Say Y here to enable the fake driver that serves as an example
+          of HardMAC device driver.
+
+          This driver can also be built as a module. To do so say M here.
+	  The module will be called 'fakehard'.
+
diff --git a/drivers/ieee802154/Makefile b/drivers/ieee802154/Makefile
new file mode 100644
index 00000000000..e0e8e1a184f
--- /dev/null
+++ b/drivers/ieee802154/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_IEEE802154_FAKEHARD) += fakehard.o
+
+EXTRA_CFLAGS += -DDEBUG -DCONFIG_FFD
diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
new file mode 100644
index 00000000000..0384144c0b3
--- /dev/null
+++ b/drivers/ieee802154/fakehard.c
@@ -0,0 +1,270 @@
+/*
+ * Sample driver for HardMAC IEEE 802.15.4 devices
+ *
+ * Copyright (C) 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+
+#include <net/ieee802154/af_ieee802154.h>
+#include <net/ieee802154/netdevice.h>
+#include <net/ieee802154/mac_def.h>
+#include <net/ieee802154/nl802154.h>
+
+static u16 fake_get_pan_id(struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0xeba1;
+}
+
+static u16 fake_get_short_addr(struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x1;
+}
+
+static u8 fake_get_dsn(struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x00; /* DSN are implemented in HW, so return just 0 */
+}
+
+static u8 fake_get_bsn(struct net_device *dev)
+{
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	return 0x00; /* BSN are implemented in HW, so return just 0 */
+}
+
+static int fake_assoc_req(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 channel, u8 cap)
+{
+	/* We simply emulate it here */
+	return ieee802154_nl_assoc_confirm(dev, fake_get_short_addr(dev),
+			IEEE802154_SUCCESS);
+}
+
+static int fake_assoc_resp(struct net_device *dev,
+		struct ieee802154_addr *addr, u16 short_addr, u8 status)
+{
+	return 0;
+}
+
+static int fake_disassoc_req(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason)
+{
+	return ieee802154_nl_disassoc_confirm(dev, IEEE802154_SUCCESS);
+}
+
+static int fake_start_req(struct net_device *dev, struct ieee802154_addr *addr,
+				u8 channel,
+				u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
+				u8 coord_realign)
+{
+	return 0;
+}
+
+static int fake_scan_req(struct net_device *dev, u8 type, u32 channels,
+		u8 duration)
+{
+	u8 edl[27] = {};
+	return ieee802154_nl_scan_confirm(dev, IEEE802154_SUCCESS, type,
+			channels,
+			type == IEEE802154_MAC_SCAN_ED ? edl : NULL);
+}
+
+static struct ieee802154_mlme_ops fake_mlme = {
+	.assoc_req = fake_assoc_req,
+	.assoc_resp = fake_assoc_resp,
+	.disassoc_req = fake_disassoc_req,
+	.start_req = fake_start_req,
+	.scan_req = fake_scan_req,
+
+	.get_pan_id = fake_get_pan_id,
+	.get_short_addr = fake_get_short_addr,
+	.get_dsn = fake_get_dsn,
+	.get_bsn = fake_get_bsn,
+};
+
+static int ieee802154_fake_open(struct net_device *dev)
+{
+	netif_start_queue(dev);
+	return 0;
+}
+
+static int ieee802154_fake_close(struct net_device *dev)
+{
+	netif_stop_queue(dev);
+	return 0;
+}
+
+static int ieee802154_fake_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	skb->iif = dev->ifindex;
+	skb->dev = dev;
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	dev->trans_start = jiffies;
+
+	/* FIXME: do hardware work here ... */
+
+	return 0;
+}
+
+
+static int ieee802154_fake_ioctl(struct net_device *dev, struct ifreq *ifr,
+		int cmd)
+{
+	struct sockaddr_ieee802154 *sa =
+		(struct sockaddr_ieee802154 *)&ifr->ifr_addr;
+	u16 pan_id, short_addr;
+
+	switch (cmd) {
+	case SIOCGIFADDR:
+		/* FIXME: fixed here, get from device IRL */
+		pan_id = fake_get_pan_id(dev);
+		short_addr = fake_get_short_addr(dev);
+		if (pan_id == IEEE802154_PANID_BROADCAST ||
+		    short_addr == IEEE802154_ADDR_BROADCAST)
+			return -EADDRNOTAVAIL;
+
+		sa->family = AF_IEEE802154;
+		sa->addr.addr_type = IEEE802154_ADDR_SHORT;
+		sa->addr.pan_id = pan_id;
+		sa->addr.short_addr = short_addr;
+		return 0;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int ieee802154_fake_mac_addr(struct net_device *dev, void *p)
+{
+	return -EBUSY; /* HW address is built into the device */
+}
+
+static const struct net_device_ops fake_ops = {
+	.ndo_open		= ieee802154_fake_open,
+	.ndo_stop		= ieee802154_fake_close,
+	.ndo_start_xmit		= ieee802154_fake_xmit,
+	.ndo_do_ioctl		= ieee802154_fake_ioctl,
+	.ndo_set_mac_address	= ieee802154_fake_mac_addr,
+};
+
+
+static void ieee802154_fake_setup(struct net_device *dev)
+{
+	dev->addr_len		= IEEE802154_ADDR_LEN;
+	memset(dev->broadcast, 0xff, IEEE802154_ADDR_LEN);
+	dev->features		= NETIF_F_NO_CSUM;
+	dev->needed_tailroom	= 2; /* FCS */
+	dev->mtu		= 127;
+	dev->tx_queue_len	= 10;
+	dev->type		= ARPHRD_IEEE802154;
+	dev->flags		= IFF_NOARP | IFF_BROADCAST;
+	dev->watchdog_timeo	= 0;
+}
+
+
+static int __devinit ieee802154fake_probe(struct platform_device *pdev)
+{
+	struct net_device *dev =
+		alloc_netdev(0, "hardwpan%d", ieee802154_fake_setup);
+	int err;
+
+	if (!dev)
+		return -ENOMEM;
+
+	memcpy(dev->dev_addr, "\xba\xbe\xca\xfe\xde\xad\xbe\xef",
+			dev->addr_len);
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+	dev->netdev_ops = &fake_ops;
+	dev->ml_priv = &fake_mlme;
+
+	/*
+	 * If the name is a format string the caller wants us to do a
+	 * name allocation.
+	 */
+	if (strchr(dev->name, '%')) {
+		err = dev_alloc_name(dev, dev->name);
+		if (err < 0)
+			goto out;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	platform_set_drvdata(pdev, dev);
+
+	err = register_netdev(dev);
+	if (err < 0)
+		goto out;
+
+
+	dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n");
+	return 0;
+
+out:
+	unregister_netdev(dev);
+	return err;
+}
+
+static int __devexit ieee802154fake_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	unregister_netdev(dev);
+	free_netdev(dev);
+	return 0;
+}
+
+static struct platform_device *ieee802154fake_dev;
+
+static struct platform_driver ieee802154fake_driver = {
+	.probe = ieee802154fake_probe,
+	.remove = __devexit_p(ieee802154fake_remove),
+	.driver = {
+			.name = "ieee802154hardmac",
+			.owner = THIS_MODULE,
+	},
+};
+
+static __init int fake_init(void)
+{
+	ieee802154fake_dev = platform_device_register_simple(
+			"ieee802154hardmac", -1, NULL, 0);
+	return platform_driver_register(&ieee802154fake_driver);
+}
+
+static __exit void fake_exit(void)
+{
+	platform_driver_unregister(&ieee802154fake_driver);
+	platform_device_unregister(ieee802154fake_dev);
+}
+
+module_init(fake_init);
+module_exit(fake_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 5c04cfb54cb..158a214da2f 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -760,9 +760,9 @@ int ib_device_register_sysfs(struct ib_device *device)
 	int i;
 
 	class_dev->class      = &ib_class;
-	class_dev->driver_data = device;
 	class_dev->parent     = device->dma_device;
 	dev_set_name(class_dev, device->name);
+	dev_set_drvdata(class_dev, device);
 
 	INIT_LIST_HEAD(&device->port_list);
 
diff --git a/drivers/infiniband/hw/amso1100/c2_cq.c b/drivers/infiniband/hw/amso1100/c2_cq.c
index bb17cce3cb5..f5c45b194f5 100644
--- a/drivers/infiniband/hw/amso1100/c2_cq.c
+++ b/drivers/infiniband/hw/amso1100/c2_cq.c
@@ -133,7 +133,7 @@ static inline int c2_poll_one(struct c2_dev *c2dev,
 	struct c2_qp *qp;
 	int is_recv = 0;
 
-	ce = (struct c2wr_ce *) c2_mq_consume(&cq->mq);
+	ce = c2_mq_consume(&cq->mq);
 	if (!ce) {
 		return -EAGAIN;
 	}
@@ -146,7 +146,7 @@ static inline int c2_poll_one(struct c2_dev *c2dev,
 	while ((qp =
 		(struct c2_qp *) (unsigned long) ce->qp_user_context) == NULL) {
 		c2_mq_free(&cq->mq);
-		ce = (struct c2wr_ce *) c2_mq_consume(&cq->mq);
+		ce = c2_mq_consume(&cq->mq);
 		if (!ce)
 			return -EAGAIN;
 	}
diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h
index ff9be1a1310..32e3b1461d8 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_wr.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h
@@ -176,7 +176,7 @@ struct t3_send_wr {
 	struct t3_sge sgl[T3_MAX_SGE];	/* 4+ */
 };
 
-#define T3_MAX_FASTREG_DEPTH 24
+#define T3_MAX_FASTREG_DEPTH 10
 #define T3_MAX_FASTREG_FRAG 10
 
 struct t3_fastreg_wr {
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 160ef482712..e2a63214008 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -40,6 +40,7 @@
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>
+#include <linux/inetdevice.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1152,12 +1153,39 @@ static int iwch_query_device(struct ib_device *ibdev,
 static int iwch_query_port(struct ib_device *ibdev,
 			   u8 port, struct ib_port_attr *props)
 {
+	struct iwch_dev *dev;
+	struct net_device *netdev;
+	struct in_device *inetdev;
+
 	PDBG("%s ibdev %p\n", __func__, ibdev);
 
+	dev = to_iwch_dev(ibdev);
+	netdev = dev->rdev.port_info.lldevs[port-1];
+
 	memset(props, 0, sizeof(struct ib_port_attr));
 	props->max_mtu = IB_MTU_4096;
-	props->active_mtu = IB_MTU_2048;
-	props->state = IB_PORT_ACTIVE;
+	if (netdev->mtu >= 4096)
+		props->active_mtu = IB_MTU_4096;
+	else if (netdev->mtu >= 2048)
+		props->active_mtu = IB_MTU_2048;
+	else if (netdev->mtu >= 1024)
+		props->active_mtu = IB_MTU_1024;
+	else if (netdev->mtu >= 512)
+		props->active_mtu = IB_MTU_512;
+	else
+		props->active_mtu = IB_MTU_256;
+
+	if (!netif_carrier_ok(netdev))
+		props->state = IB_PORT_DOWN;
+	else {
+		inetdev = in_dev_get(netdev);
+		if (inetdev->ifa_list)
+			props->state = IB_PORT_ACTIVE;
+		else
+			props->state = IB_PORT_INIT;
+		in_dev_put(inetdev);
+	}
+
 	props->port_cap_flags =
 	    IB_PORT_CM_SUP |
 	    IB_PORT_SNMP_TUNNEL_SUP |
diff --git a/drivers/infiniband/hw/ehca/ehca_classes_pSeries.h b/drivers/infiniband/hw/ehca/ehca_classes_pSeries.h
index 1798e6466bd..689c35786dd 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes_pSeries.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes_pSeries.h
@@ -165,7 +165,6 @@ struct hcp_modify_qp_control_block {
 #define MQPCB_MASK_ALT_P_KEY_IDX                EHCA_BMASK_IBM( 7,  7)
 #define MQPCB_MASK_RDMA_ATOMIC_CTRL             EHCA_BMASK_IBM( 8,  8)
 #define MQPCB_MASK_QP_STATE                     EHCA_BMASK_IBM( 9,  9)
-#define MQPCB_QP_STATE                          EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_RDMA_NR_ATOMIC_RESP_RES      EHCA_BMASK_IBM(11, 11)
 #define MQPCB_MASK_PATH_MIGRATION_STATE         EHCA_BMASK_IBM(12, 12)
 #define MQPCB_MASK_RDMA_ATOMIC_OUTST_DEST_QP    EHCA_BMASK_IBM(13, 13)
@@ -176,60 +175,33 @@ struct hcp_modify_qp_control_block {
 #define MQPCB_MASK_RETRY_COUNT                  EHCA_BMASK_IBM(18, 18)
 #define MQPCB_MASK_TIMEOUT                      EHCA_BMASK_IBM(19, 19)
 #define MQPCB_MASK_PATH_MTU                     EHCA_BMASK_IBM(20, 20)
-#define MQPCB_PATH_MTU                          EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_MAX_STATIC_RATE              EHCA_BMASK_IBM(21, 21)
-#define MQPCB_MAX_STATIC_RATE                   EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_DLID                         EHCA_BMASK_IBM(22, 22)
-#define MQPCB_DLID                              EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_RNR_RETRY_COUNT              EHCA_BMASK_IBM(23, 23)
-#define MQPCB_RNR_RETRY_COUNT                   EHCA_BMASK_IBM(29, 31)
 #define MQPCB_MASK_SOURCE_PATH_BITS             EHCA_BMASK_IBM(24, 24)
-#define MQPCB_SOURCE_PATH_BITS                  EHCA_BMASK_IBM(25, 31)
 #define MQPCB_MASK_TRAFFIC_CLASS                EHCA_BMASK_IBM(25, 25)
-#define MQPCB_TRAFFIC_CLASS                     EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_HOP_LIMIT                    EHCA_BMASK_IBM(26, 26)
-#define MQPCB_HOP_LIMIT                         EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_SOURCE_GID_IDX               EHCA_BMASK_IBM(27, 27)
-#define MQPCB_SOURCE_GID_IDX                    EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_FLOW_LABEL                   EHCA_BMASK_IBM(28, 28)
-#define MQPCB_FLOW_LABEL                        EHCA_BMASK_IBM(12, 31)
 #define MQPCB_MASK_DEST_GID                     EHCA_BMASK_IBM(30, 30)
 #define MQPCB_MASK_SERVICE_LEVEL_AL             EHCA_BMASK_IBM(31, 31)
-#define MQPCB_SERVICE_LEVEL_AL                  EHCA_BMASK_IBM(28, 31)
 #define MQPCB_MASK_SEND_GRH_FLAG_AL             EHCA_BMASK_IBM(32, 32)
-#define MQPCB_SEND_GRH_FLAG_AL                  EHCA_BMASK_IBM(31, 31)
 #define MQPCB_MASK_RETRY_COUNT_AL               EHCA_BMASK_IBM(33, 33)
-#define MQPCB_RETRY_COUNT_AL                    EHCA_BMASK_IBM(29, 31)
 #define MQPCB_MASK_TIMEOUT_AL                   EHCA_BMASK_IBM(34, 34)
-#define MQPCB_TIMEOUT_AL                        EHCA_BMASK_IBM(27, 31)
 #define MQPCB_MASK_MAX_STATIC_RATE_AL           EHCA_BMASK_IBM(35, 35)
-#define MQPCB_MAX_STATIC_RATE_AL                EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_DLID_AL                      EHCA_BMASK_IBM(36, 36)
-#define MQPCB_DLID_AL                           EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_RNR_RETRY_COUNT_AL           EHCA_BMASK_IBM(37, 37)
-#define MQPCB_RNR_RETRY_COUNT_AL                EHCA_BMASK_IBM(29, 31)
 #define MQPCB_MASK_SOURCE_PATH_BITS_AL          EHCA_BMASK_IBM(38, 38)
-#define MQPCB_SOURCE_PATH_BITS_AL               EHCA_BMASK_IBM(25, 31)
 #define MQPCB_MASK_TRAFFIC_CLASS_AL             EHCA_BMASK_IBM(39, 39)
-#define MQPCB_TRAFFIC_CLASS_AL                  EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_HOP_LIMIT_AL                 EHCA_BMASK_IBM(40, 40)
-#define MQPCB_HOP_LIMIT_AL                      EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_SOURCE_GID_IDX_AL            EHCA_BMASK_IBM(41, 41)
-#define MQPCB_SOURCE_GID_IDX_AL                 EHCA_BMASK_IBM(24, 31)
 #define MQPCB_MASK_FLOW_LABEL_AL                EHCA_BMASK_IBM(42, 42)
-#define MQPCB_FLOW_LABEL_AL                     EHCA_BMASK_IBM(12, 31)
 #define MQPCB_MASK_DEST_GID_AL                  EHCA_BMASK_IBM(44, 44)
 #define MQPCB_MASK_MAX_NR_OUTST_SEND_WR         EHCA_BMASK_IBM(45, 45)
-#define MQPCB_MAX_NR_OUTST_SEND_WR              EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_MAX_NR_OUTST_RECV_WR         EHCA_BMASK_IBM(46, 46)
-#define MQPCB_MAX_NR_OUTST_RECV_WR              EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_DISABLE_ETE_CREDIT_CHECK     EHCA_BMASK_IBM(47, 47)
-#define MQPCB_DISABLE_ETE_CREDIT_CHECK          EHCA_BMASK_IBM(31, 31)
-#define MQPCB_QP_NUMBER                         EHCA_BMASK_IBM( 8, 31)
 #define MQPCB_MASK_QP_ENABLE                    EHCA_BMASK_IBM(48, 48)
-#define MQPCB_QP_ENABLE                         EHCA_BMASK_IBM(31, 31)
 #define MQPCB_MASK_CURR_SRQ_LIMIT               EHCA_BMASK_IBM(49, 49)
-#define MQPCB_CURR_SRQ_LIMIT                    EHCA_BMASK_IBM(16, 31)
 #define MQPCB_MASK_QP_AFF_ASYN_EV_LOG_REG       EHCA_BMASK_IBM(50, 50)
 #define MQPCB_MASK_SHARED_RQ_HNDL               EHCA_BMASK_IBM(51, 51)
 
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index 99bcbd7ffb0..4b89b791be6 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -479,13 +479,13 @@ void ehca_tasklet_neq(unsigned long data)
 	struct ehca_eqe *eqe;
 	u64 ret;
 
-	eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->neq);
+	eqe = ehca_poll_eq(shca, &shca->neq);
 
 	while (eqe) {
 		if (!EHCA_BMASK_GET(NEQE_COMPLETION_EVENT, eqe->entry))
 			parse_ec(shca, eqe->entry);
 
-		eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->neq);
+		eqe = ehca_poll_eq(shca, &shca->neq);
 	}
 
 	ret = hipz_h_reset_event(shca->ipz_hca_handle,
@@ -572,8 +572,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq)
 	eqe_cnt = 0;
 	do {
 		u32 token;
-		eqe_cache[eqe_cnt].eqe =
-			(struct ehca_eqe *)ehca_poll_eq(shca, eq);
+		eqe_cache[eqe_cnt].eqe = ehca_poll_eq(shca, eq);
 		if (!eqe_cache[eqe_cnt].eqe)
 			break;
 		eqe_value = eqe_cache[eqe_cnt].eqe->entry;
@@ -637,7 +636,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq)
 		goto unlock_irq_spinlock;
 	do {
 		struct ehca_eqe *eqe;
-		eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->eq);
+		eqe = ehca_poll_eq(shca, &shca->eq);
 		if (!eqe)
 			break;
 		process_eqe(shca, eqe);
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index 368311ce332..ce4e6eff479 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -52,7 +52,7 @@
 #include "ehca_tools.h"
 #include "hcp_if.h"
 
-#define HCAD_VERSION "0026"
+#define HCAD_VERSION "0027"
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
@@ -636,7 +636,7 @@ static ssize_t  ehca_show_##name(struct device *dev,                       \
 	struct hipz_query_hca *rblock;				           \
 	int data;                                                          \
 									   \
-	shca = dev->driver_data;					   \
+	shca = dev_get_drvdata(dev);					   \
 									   \
 	rblock = ehca_alloc_fw_ctrlblock(GFP_KERNEL);			   \
 	if (!rblock) {						           \
@@ -680,7 +680,7 @@ static ssize_t ehca_show_adapter_handle(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct ehca_shca *shca = dev->driver_data;
+	struct ehca_shca *shca = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%llx\n", shca->ipz_hca_handle.handle);
 
@@ -749,7 +749,7 @@ static int __devinit ehca_probe(struct of_device *dev,
 
 	shca->ofdev = dev;
 	shca->ipz_hca_handle.handle = *handle;
-	dev->dev.driver_data = shca;
+	dev_set_drvdata(&dev->dev, shca);
 
 	ret = ehca_sense_attributes(shca);
 	if (ret < 0) {
@@ -878,7 +878,7 @@ probe1:
 
 static int __devexit ehca_remove(struct of_device *dev)
 {
-	struct ehca_shca *shca = dev->dev.driver_data;
+	struct ehca_shca *shca = dev_get_drvdata(&dev->dev);
 	unsigned long flags;
 	int ret;
 
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 00c10815971..0338f1fabe8 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -461,7 +461,7 @@ static struct ehca_qp *internal_create_qp(
 					      ib_device);
 	struct ib_ucontext *context = NULL;
 	u64 h_ret;
-	int is_llqp = 0, has_srq = 0;
+	int is_llqp = 0, has_srq = 0, is_user = 0;
 	int qp_type, max_send_sge, max_recv_sge, ret;
 
 	/* h_call's out parameters */
@@ -609,9 +609,6 @@ static struct ehca_qp *internal_create_qp(
 		}
 	}
 
-	if (pd->uobject && udata)
-		context = pd->uobject->context;
-
 	my_qp = kmem_cache_zalloc(qp_cache, GFP_KERNEL);
 	if (!my_qp) {
 		ehca_err(pd->device, "pd=%p not enough memory to alloc qp", pd);
@@ -619,6 +616,11 @@ static struct ehca_qp *internal_create_qp(
 		return ERR_PTR(-ENOMEM);
 	}
 
+	if (pd->uobject && udata) {
+		is_user = 1;
+		context = pd->uobject->context;
+	}
+
 	atomic_set(&my_qp->nr_events, 0);
 	init_waitqueue_head(&my_qp->wait_completion);
 	spin_lock_init(&my_qp->spinlock_s);
@@ -707,7 +709,7 @@ static struct ehca_qp *internal_create_qp(
 			(parms.squeue.is_small || parms.rqueue.is_small);
 	}
 
-	h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms);
+	h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms, is_user);
 	if (h_ret != H_SUCCESS) {
 		ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%lli",
 			 h_ret);
@@ -769,18 +771,20 @@ static struct ehca_qp *internal_create_qp(
 			goto create_qp_exit2;
 		}
 
-		my_qp->sq_map.entries = my_qp->ipz_squeue.queue_length /
-			 my_qp->ipz_squeue.qe_size;
-		my_qp->sq_map.map = vmalloc(my_qp->sq_map.entries *
-					sizeof(struct ehca_qmap_entry));
-		if (!my_qp->sq_map.map) {
-			ehca_err(pd->device, "Couldn't allocate squeue "
-				 "map ret=%i", ret);
-			goto create_qp_exit3;
+		if (!is_user) {
+			my_qp->sq_map.entries = my_qp->ipz_squeue.queue_length /
+				my_qp->ipz_squeue.qe_size;
+			my_qp->sq_map.map = vmalloc(my_qp->sq_map.entries *
+						    sizeof(struct ehca_qmap_entry));
+			if (!my_qp->sq_map.map) {
+				ehca_err(pd->device, "Couldn't allocate squeue "
+					 "map ret=%i", ret);
+				goto create_qp_exit3;
+			}
+			INIT_LIST_HEAD(&my_qp->sq_err_node);
+			/* to avoid the generation of bogus flush CQEs */
+			reset_queue_map(&my_qp->sq_map);
 		}
-		INIT_LIST_HEAD(&my_qp->sq_err_node);
-		/* to avoid the generation of bogus flush CQEs */
-		reset_queue_map(&my_qp->sq_map);
 	}
 
 	if (HAS_RQ(my_qp)) {
@@ -792,20 +796,21 @@ static struct ehca_qp *internal_create_qp(
 				 "and pages ret=%i", ret);
 			goto create_qp_exit4;
 		}
-
-		my_qp->rq_map.entries = my_qp->ipz_rqueue.queue_length /
-			my_qp->ipz_rqueue.qe_size;
-		my_qp->rq_map.map = vmalloc(my_qp->rq_map.entries *
-				sizeof(struct ehca_qmap_entry));
-		if (!my_qp->rq_map.map) {
-			ehca_err(pd->device, "Couldn't allocate squeue "
-					"map ret=%i", ret);
-			goto create_qp_exit5;
+		if (!is_user) {
+			my_qp->rq_map.entries = my_qp->ipz_rqueue.queue_length /
+				my_qp->ipz_rqueue.qe_size;
+			my_qp->rq_map.map = vmalloc(my_qp->rq_map.entries *
+						    sizeof(struct ehca_qmap_entry));
+			if (!my_qp->rq_map.map) {
+				ehca_err(pd->device, "Couldn't allocate squeue "
+					 "map ret=%i", ret);
+				goto create_qp_exit5;
+			}
+			INIT_LIST_HEAD(&my_qp->rq_err_node);
+			/* to avoid the generation of bogus flush CQEs */
+			reset_queue_map(&my_qp->rq_map);
 		}
-		INIT_LIST_HEAD(&my_qp->rq_err_node);
-		/* to avoid the generation of bogus flush CQEs */
-		reset_queue_map(&my_qp->rq_map);
-	} else if (init_attr->srq) {
+	} else if (init_attr->srq && !is_user) {
 		/* this is a base QP, use the queue map of the SRQ */
 		my_qp->rq_map = my_srq->rq_map;
 		INIT_LIST_HEAD(&my_qp->rq_err_node);
@@ -918,7 +923,7 @@ create_qp_exit7:
 	kfree(my_qp->mod_qp_parm);
 
 create_qp_exit6:
-	if (HAS_RQ(my_qp))
+	if (HAS_RQ(my_qp) && !is_user)
 		vfree(my_qp->rq_map.map);
 
 create_qp_exit5:
@@ -926,7 +931,7 @@ create_qp_exit5:
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
 
 create_qp_exit4:
-	if (HAS_SQ(my_qp))
+	if (HAS_SQ(my_qp) && !is_user)
 		vfree(my_qp->sq_map.map);
 
 create_qp_exit3:
@@ -1244,6 +1249,7 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 	u64 update_mask;
 	u64 h_ret;
 	int bad_wqe_cnt = 0;
+	int is_user = 0;
 	int squeue_locked = 0;
 	unsigned long flags = 0;
 
@@ -1266,6 +1272,8 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 		ret = ehca2ib_return_code(h_ret);
 		goto modify_qp_exit1;
 	}
+	if (ibqp->uobject)
+		is_user = 1;
 
 	qp_cur_state = ehca2ib_qp_state(mqpcb->qp_state);
 
@@ -1728,7 +1736,8 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 			goto modify_qp_exit2;
 		}
 	}
-	if ((qp_new_state == IB_QPS_ERR) && (qp_cur_state != IB_QPS_ERR)) {
+	if ((qp_new_state == IB_QPS_ERR) && (qp_cur_state != IB_QPS_ERR)
+	    && !is_user) {
 		ret = check_for_left_cqes(my_qp, shca);
 		if (ret)
 			goto modify_qp_exit2;
@@ -1738,16 +1747,17 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 		ipz_qeit_reset(&my_qp->ipz_rqueue);
 		ipz_qeit_reset(&my_qp->ipz_squeue);
 
-		if (qp_cur_state == IB_QPS_ERR) {
+		if (qp_cur_state == IB_QPS_ERR && !is_user) {
 			del_from_err_list(my_qp->send_cq, &my_qp->sq_err_node);
 
 			if (HAS_RQ(my_qp))
 				del_from_err_list(my_qp->recv_cq,
 						  &my_qp->rq_err_node);
 		}
-		reset_queue_map(&my_qp->sq_map);
+		if (!is_user)
+			reset_queue_map(&my_qp->sq_map);
 
-		if (HAS_RQ(my_qp))
+		if (HAS_RQ(my_qp) && !is_user)
 			reset_queue_map(&my_qp->rq_map);
 	}
 
@@ -1952,19 +1962,13 @@ int ehca_query_qp(struct ib_qp *qp,
 	qp_attr->cap.max_inline_data = my_qp->sq_max_inline_data_size;
 	qp_attr->dest_qp_num = qpcb->dest_qp_nr;
 
-	qp_attr->pkey_index =
-		EHCA_BMASK_GET(MQPCB_PRIM_P_KEY_IDX, qpcb->prim_p_key_idx);
-
-	qp_attr->port_num =
-		EHCA_BMASK_GET(MQPCB_PRIM_PHYS_PORT, qpcb->prim_phys_port);
-
+	qp_attr->pkey_index = qpcb->prim_p_key_idx;
+	qp_attr->port_num = qpcb->prim_phys_port;
 	qp_attr->timeout = qpcb->timeout;
 	qp_attr->retry_cnt = qpcb->retry_count;
 	qp_attr->rnr_retry = qpcb->rnr_retry_count;
 
-	qp_attr->alt_pkey_index =
-		EHCA_BMASK_GET(MQPCB_PRIM_P_KEY_IDX, qpcb->alt_p_key_idx);
-
+	qp_attr->alt_pkey_index = qpcb->alt_p_key_idx;
 	qp_attr->alt_port_num = qpcb->alt_phys_port;
 	qp_attr->alt_timeout = qpcb->timeout_al;
 
@@ -2051,8 +2055,7 @@ int ehca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
 		update_mask |=
 			EHCA_BMASK_SET(MQPCB_MASK_CURR_SRQ_LIMIT, 1)
 			| EHCA_BMASK_SET(MQPCB_MASK_QP_AFF_ASYN_EV_LOG_REG, 1);
-		mqpcb->curr_srq_limit =
-			EHCA_BMASK_SET(MQPCB_CURR_SRQ_LIMIT, attr->srq_limit);
+		mqpcb->curr_srq_limit = attr->srq_limit;
 		mqpcb->qp_aff_asyn_ev_log_reg =
 			EHCA_BMASK_SET(QPX_AAELOG_RESET_SRQ_LIMIT, 1);
 	}
@@ -2115,8 +2118,7 @@ int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr)
 
 	srq_attr->max_wr = qpcb->max_nr_outst_recv_wr - 1;
 	srq_attr->max_sge = 3;
-	srq_attr->srq_limit = EHCA_BMASK_GET(
-		MQPCB_CURR_SRQ_LIMIT, qpcb->curr_srq_limit);
+	srq_attr->srq_limit = qpcb->curr_srq_limit;
 
 	if (ehca_debug_level >= 2)
 		ehca_dmp(qpcb, 4*70, "qp_num=%x", my_qp->real_qp_num);
@@ -2138,10 +2140,12 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 	int ret;
 	u64 h_ret;
 	u8 port_num;
+	int is_user = 0;
 	enum ib_qp_type	qp_type;
 	unsigned long flags;
 
 	if (uobject) {
+		is_user = 1;
 		if (my_qp->mm_count_galpa ||
 		    my_qp->mm_count_rqueue || my_qp->mm_count_squeue) {
 			ehca_err(dev, "Resources still referenced in "
@@ -2168,10 +2172,10 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 	 * SRQs will never get into an error list and do not have a recv_cq,
 	 * so we need to skip them here.
 	 */
-	if (HAS_RQ(my_qp) && !IS_SRQ(my_qp))
+	if (HAS_RQ(my_qp) && !IS_SRQ(my_qp) && !is_user)
 		del_from_err_list(my_qp->recv_cq, &my_qp->rq_err_node);
 
-	if (HAS_SQ(my_qp))
+	if (HAS_SQ(my_qp) && !is_user)
 		del_from_err_list(my_qp->send_cq, &my_qp->sq_err_node);
 
 	/* now wait until all pending events have completed */
@@ -2209,13 +2213,13 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
 	if (HAS_RQ(my_qp)) {
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
-
-		vfree(my_qp->rq_map.map);
+		if (!is_user)
+			vfree(my_qp->rq_map.map);
 	}
 	if (HAS_SQ(my_qp)) {
 		ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
-
-		vfree(my_qp->sq_map.map);
+		if (!is_user)
+			vfree(my_qp->sq_map.map);
 	}
 	kmem_cache_free(qp_cache, my_qp);
 	atomic_dec(&shca->num_qps);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c
index d0ab0c0d5e9..4d5dc3304d4 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.c
+++ b/drivers/infiniband/hw/ehca/hcp_if.c
@@ -284,7 +284,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 	param->act_pages = (u32)outs[4];
 
 	if (ret == H_SUCCESS)
-		hcp_galpas_ctor(&cq->galpas, outs[5], outs[6]);
+		hcp_galpas_ctor(&cq->galpas, 0, outs[5], outs[6]);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
 		ehca_gen_err("Not enough resources. ret=%lli", ret);
@@ -293,7 +293,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 }
 
 u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
-			     struct ehca_alloc_qp_parms *parms)
+			     struct ehca_alloc_qp_parms *parms, int is_user)
 {
 	u64 ret;
 	u64 allocate_controls, max_r10_reg, r11, r12;
@@ -359,7 +359,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
 		(u32)EHCA_BMASK_GET(H_ALL_RES_QP_RQUEUE_SIZE_PAGES, outs[4]);
 
 	if (ret == H_SUCCESS)
-		hcp_galpas_ctor(&parms->galpas, outs[6], outs[6]);
+		hcp_galpas_ctor(&parms->galpas, is_user, outs[6], outs[6]);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
 		ehca_gen_err("Not enough resources. ret=%lli", ret);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h
index 2c3c6e0ea5c..39c1c3618ec 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.h
+++ b/drivers/infiniband/hw/ehca/hcp_if.h
@@ -78,7 +78,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
  * initialize resources, create empty QPPTs (2 rings).
  */
 u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
-			     struct ehca_alloc_qp_parms *parms);
+			     struct ehca_alloc_qp_parms *parms, int is_user);
 
 u64 hipz_h_query_port(const struct ipz_adapter_handle adapter_handle,
 		      const u8 port_id,
diff --git a/drivers/infiniband/hw/ehca/hcp_phyp.c b/drivers/infiniband/hw/ehca/hcp_phyp.c
index 214821095cb..b3e0e72e8a7 100644
--- a/drivers/infiniband/hw/ehca/hcp_phyp.c
+++ b/drivers/infiniband/hw/ehca/hcp_phyp.c
@@ -54,12 +54,15 @@ int hcall_unmap_page(u64 mapaddr)
 	return 0;
 }
 
-int hcp_galpas_ctor(struct h_galpas *galpas,
+int hcp_galpas_ctor(struct h_galpas *galpas, int is_user,
 		    u64 paddr_kernel, u64 paddr_user)
 {
-	int ret = hcall_map_page(paddr_kernel, &galpas->kernel.fw_handle);
-	if (ret)
-		return ret;
+	if (!is_user) {
+		int ret = hcall_map_page(paddr_kernel, &galpas->kernel.fw_handle);
+		if (ret)
+			return ret;
+	} else
+		galpas->kernel.fw_handle = 0;
 
 	galpas->user.fw_handle = paddr_user;
 
diff --git a/drivers/infiniband/hw/ehca/hcp_phyp.h b/drivers/infiniband/hw/ehca/hcp_phyp.h
index 5305c2a3ed9..204227d5303 100644
--- a/drivers/infiniband/hw/ehca/hcp_phyp.h
+++ b/drivers/infiniband/hw/ehca/hcp_phyp.h
@@ -78,7 +78,7 @@ static inline void hipz_galpa_store(struct h_galpa galpa, u32 offset, u64 value)
 	*(volatile u64 __force *)addr = value;
 }
 
-int hcp_galpas_ctor(struct h_galpas *galpas,
+int hcp_galpas_ctor(struct h_galpas *galpas, int is_user,
 		    u64 paddr_kernel, u64 paddr_user);
 
 int hcp_galpas_dtor(struct h_galpas *galpas);
diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.c b/drivers/infiniband/hw/ehca/ipz_pt_fn.c
index c3a32846543..1227c593627 100644
--- a/drivers/infiniband/hw/ehca/ipz_pt_fn.c
+++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.c
@@ -220,10 +220,13 @@ int ipz_queue_ctor(struct ehca_pd *pd, struct ipz_queue *queue,
 	queue->small_page = NULL;
 
 	/* allocate queue page pointers */
-	queue->queue_pages = vmalloc(nr_of_pages * sizeof(void *));
+	queue->queue_pages = kmalloc(nr_of_pages * sizeof(void *), GFP_KERNEL);
 	if (!queue->queue_pages) {
-		ehca_gen_err("Couldn't allocate queue page list");
-		return 0;
+		queue->queue_pages = vmalloc(nr_of_pages * sizeof(void *));
+		if (!queue->queue_pages) {
+			ehca_gen_err("Couldn't allocate queue page list");
+			return 0;
+		}
 	}
 	memset(queue->queue_pages, 0, nr_of_pages * sizeof(void *));
 
@@ -240,7 +243,10 @@ int ipz_queue_ctor(struct ehca_pd *pd, struct ipz_queue *queue,
 ipz_queue_ctor_exit0:
 	ehca_gen_err("Couldn't alloc pages queue=%p "
 		 "nr_of_pages=%x",  queue, nr_of_pages);
-	vfree(queue->queue_pages);
+	if (is_vmalloc_addr(queue->queue_pages))
+		vfree(queue->queue_pages);
+	else
+		kfree(queue->queue_pages);
 
 	return 0;
 }
@@ -262,7 +268,10 @@ int ipz_queue_dtor(struct ehca_pd *pd, struct ipz_queue *queue)
 			free_page((unsigned long)queue->queue_pages[i]);
 	}
 
-	vfree(queue->queue_pages);
+	if (is_vmalloc_addr(queue->queue_pages))
+		vfree(queue->queue_pages);
+	else
+		kfree(queue->queue_pages);
 
 	return 1;
 }
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 20724aee76f..c4a02648c8a 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1585,12 +1585,16 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 				break;
 
 			case IB_WR_LOCAL_INV:
+				ctrl->srcrb_flags |=
+					cpu_to_be32(MLX4_WQE_CTRL_STRONG_ORDER);
 				set_local_inv_seg(wqe, wr->ex.invalidate_rkey);
 				wqe  += sizeof (struct mlx4_wqe_local_inval_seg);
 				size += sizeof (struct mlx4_wqe_local_inval_seg) / 16;
 				break;
 
 			case IB_WR_FAST_REG_MR:
+				ctrl->srcrb_flags |=
+					cpu_to_be32(MLX4_WQE_CTRL_STRONG_ORDER);
 				set_fmr_seg(wqe, wr);
 				wqe  += sizeof (struct mlx4_wqe_fmr_seg);
 				size += sizeof (struct mlx4_wqe_fmr_seg) / 16;
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 6d55f9d748f..8c2ed994d54 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -1059,7 +1059,7 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev,
 	MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_MTT_OFFSET);
 	if (mthca_is_memfree(dev))
 		dev_lim->reserved_mtts = ALIGN((1 << (field >> 4)) * sizeof(u64),
-					       MTHCA_MTT_SEG_SIZE) / MTHCA_MTT_SEG_SIZE;
+					       dev->limits.mtt_seg_size) / dev->limits.mtt_seg_size;
 	else
 		dev_lim->reserved_mtts = 1 << (field >> 4);
 	MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_MRW_SZ_OFFSET);
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 252590116df..9ef611f6dd3 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -159,6 +159,7 @@ struct mthca_limits {
 	int      reserved_eqs;
 	int      num_mpts;
 	int      num_mtt_segs;
+	int	 mtt_seg_size;
 	int      fmr_reserved_mtts;
 	int      reserved_mtts;
 	int      reserved_mrws;
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index 28f0e0c40d7..90e4e450a12 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -641,9 +641,11 @@ static void mthca_free_irqs(struct mthca_dev *dev)
 	if (dev->eq_table.have_irq)
 		free_irq(dev->pdev->irq, dev);
 	for (i = 0; i < MTHCA_NUM_EQ; ++i)
-		if (dev->eq_table.eq[i].have_irq)
+		if (dev->eq_table.eq[i].have_irq) {
 			free_irq(dev->eq_table.eq[i].msi_x_vector,
 				 dev->eq_table.eq + i);
+			dev->eq_table.eq[i].have_irq = 0;
+		}
 }
 
 static int mthca_map_reg(struct mthca_dev *dev,
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 1d83cf7caf3..13da9f1d24c 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -125,6 +125,10 @@ module_param_named(fmr_reserved_mtts, hca_profile.fmr_reserved_mtts, int, 0444);
 MODULE_PARM_DESC(fmr_reserved_mtts,
 		 "number of memory translation table segments reserved for FMR");
 
+static int log_mtts_per_seg = ilog2(MTHCA_MTT_SEG_SIZE / 8);
+module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444);
+MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-5)");
+
 static char mthca_version[] __devinitdata =
 	DRV_NAME ": Mellanox InfiniBand HCA driver v"
 	DRV_VERSION " (" DRV_RELDATE ")\n";
@@ -162,6 +166,7 @@ static int mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim *dev_lim)
 	int err;
 	u8 status;
 
+	mdev->limits.mtt_seg_size = (1 << log_mtts_per_seg) * 8;
 	err = mthca_QUERY_DEV_LIM(mdev, dev_lim, &status);
 	if (err) {
 		mthca_err(mdev, "QUERY_DEV_LIM command failed, aborting.\n");
@@ -460,11 +465,11 @@ static int mthca_init_icm(struct mthca_dev *mdev,
 	}
 
 	/* CPU writes to non-reserved MTTs, while HCA might DMA to reserved mtts */
-	mdev->limits.reserved_mtts = ALIGN(mdev->limits.reserved_mtts * MTHCA_MTT_SEG_SIZE,
-					   dma_get_cache_alignment()) / MTHCA_MTT_SEG_SIZE;
+	mdev->limits.reserved_mtts = ALIGN(mdev->limits.reserved_mtts * mdev->limits.mtt_seg_size,
+					   dma_get_cache_alignment()) / mdev->limits.mtt_seg_size;
 
 	mdev->mr_table.mtt_table = mthca_alloc_icm_table(mdev, init_hca->mtt_base,
-							 MTHCA_MTT_SEG_SIZE,
+							 mdev->limits.mtt_seg_size,
 							 mdev->limits.num_mtt_segs,
 							 mdev->limits.reserved_mtts,
 							 1, 0);
@@ -1315,6 +1320,12 @@ static void __init mthca_validate_profile(void)
 		printk(KERN_WARNING PFX "Corrected fmr_reserved_mtts to %d.\n",
 		       hca_profile.fmr_reserved_mtts);
 	}
+
+	if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 5)) {
+		printk(KERN_WARNING PFX "bad log_mtts_per_seg (%d). Using default - %d\n",
+		       log_mtts_per_seg, ilog2(MTHCA_MTT_SEG_SIZE / 8));
+		log_mtts_per_seg = ilog2(MTHCA_MTT_SEG_SIZE / 8);
+	}
 }
 
 static int __init mthca_init(void)
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index 882e6b73591..d606edf1085 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -220,7 +220,7 @@ static struct mthca_mtt *__mthca_alloc_mtt(struct mthca_dev *dev, int size,
 
 	mtt->buddy = buddy;
 	mtt->order = 0;
-	for (i = MTHCA_MTT_SEG_SIZE / 8; i < size; i <<= 1)
+	for (i = dev->limits.mtt_seg_size / 8; i < size; i <<= 1)
 		++mtt->order;
 
 	mtt->first_seg = mthca_alloc_mtt_range(dev, mtt->order, buddy);
@@ -267,7 +267,7 @@ static int __mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt,
 
 	while (list_len > 0) {
 		mtt_entry[0] = cpu_to_be64(dev->mr_table.mtt_base +
-					   mtt->first_seg * MTHCA_MTT_SEG_SIZE +
+					   mtt->first_seg * dev->limits.mtt_seg_size +
 					   start_index * 8);
 		mtt_entry[1] = 0;
 		for (i = 0; i < list_len && i < MTHCA_MAILBOX_SIZE / 8 - 2; ++i)
@@ -326,7 +326,7 @@ static void mthca_tavor_write_mtt_seg(struct mthca_dev *dev,
 	u64 __iomem *mtts;
 	int i;
 
-	mtts = dev->mr_table.tavor_fmr.mtt_base + mtt->first_seg * MTHCA_MTT_SEG_SIZE +
+	mtts = dev->mr_table.tavor_fmr.mtt_base + mtt->first_seg * dev->limits.mtt_seg_size +
 		start_index * sizeof (u64);
 	for (i = 0; i < list_len; ++i)
 		mthca_write64_raw(cpu_to_be64(buffer_list[i] | MTHCA_MTT_FLAG_PRESENT),
@@ -345,10 +345,10 @@ static void mthca_arbel_write_mtt_seg(struct mthca_dev *dev,
 	/* For Arbel, all MTTs must fit in the same page. */
 	BUG_ON(s / PAGE_SIZE != (s + list_len * sizeof(u64) - 1) / PAGE_SIZE);
 	/* Require full segments */
-	BUG_ON(s % MTHCA_MTT_SEG_SIZE);
+	BUG_ON(s % dev->limits.mtt_seg_size);
 
 	mtts = mthca_table_find(dev->mr_table.mtt_table, mtt->first_seg +
-				s / MTHCA_MTT_SEG_SIZE, &dma_handle);
+				s / dev->limits.mtt_seg_size, &dma_handle);
 
 	BUG_ON(!mtts);
 
@@ -479,7 +479,7 @@ int mthca_mr_alloc(struct mthca_dev *dev, u32 pd, int buffer_size_shift,
 	if (mr->mtt)
 		mpt_entry->mtt_seg =
 			cpu_to_be64(dev->mr_table.mtt_base +
-				    mr->mtt->first_seg * MTHCA_MTT_SEG_SIZE);
+				    mr->mtt->first_seg * dev->limits.mtt_seg_size);
 
 	if (0) {
 		mthca_dbg(dev, "Dumping MPT entry %08x:\n", mr->ibmr.lkey);
@@ -626,7 +626,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd,
 		goto err_out_table;
 	}
 
-	mtt_seg = mr->mtt->first_seg * MTHCA_MTT_SEG_SIZE;
+	mtt_seg = mr->mtt->first_seg * dev->limits.mtt_seg_size;
 
 	if (mthca_is_memfree(dev)) {
 		mr->mem.arbel.mtts = mthca_table_find(dev->mr_table.mtt_table,
@@ -908,7 +908,7 @@ int mthca_init_mr_table(struct mthca_dev *dev)
 			 dev->mr_table.mtt_base);
 
 		dev->mr_table.tavor_fmr.mtt_base =
-			ioremap(addr, mtts * MTHCA_MTT_SEG_SIZE);
+			ioremap(addr, mtts * dev->limits.mtt_seg_size);
 		if (!dev->mr_table.tavor_fmr.mtt_base) {
 			mthca_warn(dev, "MTT ioremap for FMR failed.\n");
 			err = -ENOMEM;
diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c
index d168c254061..8edb28a9a0e 100644
--- a/drivers/infiniband/hw/mthca/mthca_profile.c
+++ b/drivers/infiniband/hw/mthca/mthca_profile.c
@@ -94,7 +94,7 @@ s64 mthca_make_profile(struct mthca_dev *dev,
 	profile[MTHCA_RES_RDB].size  = MTHCA_RDB_ENTRY_SIZE;
 	profile[MTHCA_RES_MCG].size  = MTHCA_MGM_ENTRY_SIZE;
 	profile[MTHCA_RES_MPT].size  = dev_lim->mpt_entry_sz;
-	profile[MTHCA_RES_MTT].size  = MTHCA_MTT_SEG_SIZE;
+	profile[MTHCA_RES_MTT].size  = dev->limits.mtt_seg_size;
 	profile[MTHCA_RES_UAR].size  = dev_lim->uar_scratch_entry_sz;
 	profile[MTHCA_RES_UDAV].size = MTHCA_AV_SIZE;
 	profile[MTHCA_RES_UARC].size = request->uarc_size;
@@ -232,7 +232,7 @@ s64 mthca_make_profile(struct mthca_dev *dev,
 			dev->limits.num_mtt_segs = profile[i].num;
 			dev->mr_table.mtt_base   = profile[i].start;
 			init_hca->mtt_base       = profile[i].start;
-			init_hca->mtt_seg_sz     = ffs(MTHCA_MTT_SEG_SIZE) - 7;
+			init_hca->mtt_seg_sz     = ffs(dev->limits.mtt_seg_size) - 7;
 			break;
 		case MTHCA_RES_UAR:
 			dev->limits.num_uars       = profile[i].num;
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index b832a7b814a..4a84d02ece0 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -667,7 +667,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 		i = 0;
 		while (((nes_read32(nesdev->regs+NES_SOFTWARE_RESET) & 0x00000040) == 0) && i++ < 10000)
 			mdelay(1);
-		if (i >= 10000) {
+		if (i > 10000) {
 			nes_debug(NES_DBG_INIT, "Did not see full soft reset done.\n");
 			return 0;
 		}
@@ -675,7 +675,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 		i = 0;
 		while ((nes_read_indexed(nesdev, NES_IDX_INT_CPU_STATUS) != 0x80) && i++ < 10000)
 			mdelay(1);
-		if (i >= 10000) {
+		if (i > 10000) {
 			printk(KERN_ERR PFX "Internal CPU not ready, status = %02X\n",
 			       nes_read_indexed(nesdev, NES_IDX_INT_CPU_STATUS));
 			return 0;
@@ -701,7 +701,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 	i = 0;
 	while (((nes_read32(nesdev->regs+NES_SOFTWARE_RESET) & 0x00000040) == 0) && i++ < 10000)
 		mdelay(1);
-	if (i >= 10000) {
+	if (i > 10000) {
 		nes_debug(NES_DBG_INIT, "Did not see port soft reset done.\n");
 		return 0;
 	}
@@ -711,7 +711,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 	while (((u32temp = (nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_STATUS0)
 			& 0x0000000f)) != 0x0000000f) && i++ < 5000)
 		mdelay(1);
-	if (i >= 5000) {
+	if (i > 5000) {
 		nes_debug(NES_DBG_INIT, "Serdes 0 not ready, status=%x\n", u32temp);
 		return 0;
 	}
@@ -722,7 +722,7 @@ static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_
 		while (((u32temp = (nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_STATUS1)
 				& 0x0000000f)) != 0x0000000f) && i++ < 5000)
 			mdelay(1);
-		if (i >= 5000) {
+		if (i > 5000) {
 			nes_debug(NES_DBG_INIT, "Serdes 1 not ready, status=%x\n", u32temp);
 			return 0;
 		}
@@ -792,7 +792,7 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count,
 		while (((u32temp = (nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_STATUS0)
 				& 0x0000000f)) != 0x0000000f) && i++ < 5000)
 			mdelay(1);
-		if (i >= 5000) {
+		if (i > 5000) {
 			nes_debug(NES_DBG_PHY, "Init: serdes 0 not ready, status=%x\n", u32temp);
 			return 1;
 		}
@@ -815,7 +815,7 @@ static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count,
 			while (((u32temp = (nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_STATUS1)
 				& 0x0000000f)) != 0x0000000f) && (i++ < 5000))
 				mdelay(1);
-			if (i >= 5000) {
+			if (i > 5000) {
 				printk("%s: Init: serdes 1 not ready, status=%x\n", __func__, u32temp);
 				/* return 1; */
 			}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 47d588ba2a7..181b1f32325 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1394,8 +1394,8 @@ void ipoib_cm_skb_too_long(struct net_device *dev, struct sk_buff *skb,
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	int e = skb_queue_empty(&priv->cm.skb_queue);
 
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	skb_queue_tail(&priv->cm.skb_queue, skb);
 	if (e)
@@ -1455,13 +1455,15 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr,
 	struct net_device *dev = to_net_dev(d);
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
+
 	/* flush paths if we switch modes so that connections are restarted */
 	if (IPOIB_CM_SUPPORTED(dev->dev_addr) && !strcmp(buf, "connected\n")) {
 		set_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
 		ipoib_warn(priv, "enabling connected mode "
 			   "will cause multicast packet drops\n");
 
-		rtnl_lock();
 		dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO);
 		rtnl_unlock();
 		priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM;
@@ -1473,7 +1475,6 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr,
 	if (!strcmp(buf, "datagram\n")) {
 		clear_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
 
-		rtnl_lock();
 		if (test_bit(IPOIB_FLAG_CSUM, &priv->flags)) {
 			dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 			if (priv->hca_caps & IB_DEVICE_UD_TSO)
@@ -1485,6 +1486,7 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr,
 
 		return count;
 	}
+	rtnl_unlock();
 
 	return -EINVAL;
 }
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index ab2c192c76b..e319d91f60a 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -561,7 +561,7 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
 	struct ipoib_neigh *neigh;
 	unsigned long flags;
 
-	neigh = ipoib_neigh_alloc(skb->dst->neighbour, skb->dev);
+	neigh = ipoib_neigh_alloc(skb_dst(skb)->neighbour, skb->dev);
 	if (!neigh) {
 		++dev->stats.tx_dropped;
 		dev_kfree_skb_any(skb);
@@ -570,9 +570,9 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	path = __path_find(dev, skb->dst->neighbour->ha + 4);
+	path = __path_find(dev, skb_dst(skb)->neighbour->ha + 4);
 	if (!path) {
-		path = path_rec_create(dev, skb->dst->neighbour->ha + 4);
+		path = path_rec_create(dev, skb_dst(skb)->neighbour->ha + 4);
 		if (!path)
 			goto err_path;
 
@@ -605,7 +605,7 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev)
 				goto err_drop;
 			}
 		} else
-			ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb->dst->neighbour->ha));
+			ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb_dst(skb)->neighbour->ha));
 	} else {
 		neigh->ah  = NULL;
 
@@ -635,15 +635,15 @@ static void ipoib_path_lookup(struct sk_buff *skb, struct net_device *dev)
 	struct ipoib_dev_priv *priv = netdev_priv(skb->dev);
 
 	/* Look up path record for unicasts */
-	if (skb->dst->neighbour->ha[4] != 0xff) {
+	if (skb_dst(skb)->neighbour->ha[4] != 0xff) {
 		neigh_add_path(skb, dev);
 		return;
 	}
 
 	/* Add in the P_Key for multicasts */
-	skb->dst->neighbour->ha[8] = (priv->pkey >> 8) & 0xff;
-	skb->dst->neighbour->ha[9] = priv->pkey & 0xff;
-	ipoib_mcast_send(dev, skb->dst->neighbour->ha + 4, skb);
+	skb_dst(skb)->neighbour->ha[8] = (priv->pkey >> 8) & 0xff;
+	skb_dst(skb)->neighbour->ha[9] = priv->pkey & 0xff;
+	ipoib_mcast_send(dev, skb_dst(skb)->neighbour->ha + 4, skb);
 }
 
 static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev,
@@ -708,16 +708,16 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct ipoib_neigh *neigh;
 	unsigned long flags;
 
-	if (likely(skb->dst && skb->dst->neighbour)) {
-		if (unlikely(!*to_ipoib_neigh(skb->dst->neighbour))) {
+	if (likely(skb_dst(skb) && skb_dst(skb)->neighbour)) {
+		if (unlikely(!*to_ipoib_neigh(skb_dst(skb)->neighbour))) {
 			ipoib_path_lookup(skb, dev);
 			return NETDEV_TX_OK;
 		}
 
-		neigh = *to_ipoib_neigh(skb->dst->neighbour);
+		neigh = *to_ipoib_neigh(skb_dst(skb)->neighbour);
 
 		if (unlikely((memcmp(&neigh->dgid.raw,
-				     skb->dst->neighbour->ha + 4,
+				     skb_dst(skb)->neighbour->ha + 4,
 				     sizeof(union ib_gid))) ||
 			     (neigh->dev != dev))) {
 			spin_lock_irqsave(&priv->lock, flags);
@@ -743,7 +743,7 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 				return NETDEV_TX_OK;
 			}
 		} else if (neigh->ah) {
-			ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(skb->dst->neighbour->ha));
+			ipoib_send(dev, skb, neigh->ah, IPOIB_QPN(skb_dst(skb)->neighbour->ha));
 			return NETDEV_TX_OK;
 		}
 
@@ -772,7 +772,7 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			if ((be16_to_cpup((__be16 *) skb->data) != ETH_P_ARP) &&
 			    (be16_to_cpup((__be16 *) skb->data) != ETH_P_RARP)) {
 				ipoib_warn(priv, "Unicast, no %s: type %04x, QPN %06x %pI6\n",
-					   skb->dst ? "neigh" : "dst",
+					   skb_dst(skb) ? "neigh" : "dst",
 					   be16_to_cpup((__be16 *) skb->data),
 					   IPOIB_QPN(phdr->hwaddr),
 					   phdr->hwaddr + 4);
@@ -817,7 +817,7 @@ static int ipoib_hard_header(struct sk_buff *skb,
 	 * destination address onto the front of the skb so we can
 	 * figure out where to send the packet later.
 	 */
-	if ((!skb->dst || !skb->dst->neighbour) && daddr) {
+	if ((!skb_dst(skb) || !skb_dst(skb)->neighbour) && daddr) {
 		struct ipoib_pseudoheader *phdr =
 			(struct ipoib_pseudoheader *) skb_push(skb, sizeof *phdr);
 		memcpy(phdr->hwaddr, daddr, INFINIBAND_ALEN);
@@ -1053,6 +1053,7 @@ static void ipoib_setup(struct net_device *dev)
 	dev->tx_queue_len	 = ipoib_sendq_size * 2;
 	dev->features		 = (NETIF_F_VLAN_CHALLENGED	|
 				    NETIF_F_HIGHDMA);
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 
 	memcpy(dev->broadcast, ipv4_bcast_addr, INFINIBAND_ALEN);
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 425e31112ed..a0e97532e71 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -261,7 +261,7 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
 
 		skb->dev = dev;
 
-		if (!skb->dst || !skb->dst->neighbour) {
+		if (!skb_dst(skb) || !skb_dst(skb)->neighbour) {
 			/* put pseudoheader back on for next time */
 			skb_push(skb, sizeof (struct ipoib_pseudoheader));
 		}
@@ -707,10 +707,10 @@ void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb)
 
 out:
 	if (mcast && mcast->ah) {
-		if (skb->dst		&&
-		    skb->dst->neighbour &&
-		    !*to_ipoib_neigh(skb->dst->neighbour)) {
-			struct ipoib_neigh *neigh = ipoib_neigh_alloc(skb->dst->neighbour,
+		if (skb_dst(skb)		&&
+		    skb_dst(skb)->neighbour &&
+		    !*to_ipoib_neigh(skb_dst(skb)->neighbour)) {
+			struct ipoib_neigh *neigh = ipoib_neigh_alloc(skb_dst(skb)->neighbour,
 									skb->dev);
 
 			if (neigh) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index 4c57f329dd5..e3bf00d8cd2 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -61,7 +61,8 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
 
 	ppriv = netdev_priv(pdev);
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	mutex_lock(&ppriv->vlan_mutex);
 
 	/*
@@ -167,7 +168,8 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
 
 	ppriv = netdev_priv(pdev);
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	mutex_lock(&ppriv->vlan_mutex);
 	list_for_each_entry_safe(priv, tpriv, &ppriv->child_intfs, list) {
 		if (priv->pkey == pkey) {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 5d445f48789..7c237e6ac71 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1265,8 +1265,14 @@ static struct device_type input_dev_type = {
 	.uevent		= input_dev_uevent,
 };
 
+static char *input_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "input/%s", dev_name(dev));
+}
+
 struct class input_class = {
 	.name		= "input",
+	.nodename	= input_nodename,
 };
 EXPORT_SYMBOL_GPL(input_class);
 
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 356b3a25efa..1c0b529c06a 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -35,7 +35,7 @@
 #include <linux/input.h>
 #include <linux/gameport.h>
 #include <linux/jiffies.h>
-#include <asm/timex.h>
+#include <linux/timex.h>
 
 #define DRIVER_DESC	"Analog joystick and gamepad driver"
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5c0a631d145..06f46fcc077 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -232,7 +232,7 @@ config INPUT_GPIO_ROTARY_ENCODER
 	depends on GPIOLIB && GENERIC_GPIO
 	help
 	  Say Y here to add support for rotary encoders connected to GPIO lines.
-	  Check file:Documentation/incput/rotary_encoder.txt for more
+	  Check file:Documentation/input/rotary-encoder.txt for more
 	  information.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index d6a30cee7bc..6d67af5387a 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
+#include <linux/timex.h>
 #include <asm/io.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index a28c06d686e..89b394183a7 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -135,7 +135,7 @@ static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
 	io->dev.parent	= &dev->dev;
 
 	kmi->io 	= io;
-	kmi->base	= ioremap(dev->res.start, KMI_SIZE);
+	kmi->base	= ioremap(dev->res.start, resource_size(&dev->res));
 	if (!kmi->base) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 69af8385ab1..2957d48e004 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -569,7 +569,7 @@ static int wm97xx_probe(struct device *dev)
 	mutex_init(&wm->codec_mutex);
 
 	wm->dev = dev;
-	dev->driver_data = wm;
+	dev_set_drvdata(dev, wm);
 	wm->ac97 = to_ac97_t(dev);
 
 	/* check that we have a supported codec */
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index 928d2ed8865..b115726dc08 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -114,7 +114,7 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev,
 		xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure");
 		return -ENOMEM;
 	}
-	dev->dev.driver_data = info;
+	dev_set_drvdata(&dev->dev, info);
 	info->xbdev = dev;
 	info->irq = -1;
 	snprintf(info->phys, sizeof(info->phys), "xenbus/%s", dev->nodename);
@@ -186,7 +186,7 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev,
 
 static int xenkbd_resume(struct xenbus_device *dev)
 {
-	struct xenkbd_info *info = dev->dev.driver_data;
+	struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
 
 	xenkbd_disconnect_backend(info);
 	memset(info->page, 0, PAGE_SIZE);
@@ -195,7 +195,7 @@ static int xenkbd_resume(struct xenbus_device *dev)
 
 static int xenkbd_remove(struct xenbus_device *dev)
 {
-	struct xenkbd_info *info = dev->dev.driver_data;
+	struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
 
 	xenkbd_disconnect_backend(info);
 	if (info->kbd)
@@ -266,7 +266,7 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *info)
 static void xenkbd_backend_changed(struct xenbus_device *dev,
 				   enum xenbus_state backend_state)
 {
-	struct xenkbd_info *info = dev->dev.driver_data;
+	struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
 	int ret, val;
 
 	switch (backend_state) {
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index 3d113c6e4a7..02bdca6f95c 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -61,4 +61,6 @@ source "drivers/isdn/hardware/Kconfig"
 
 endif # ISDN_CAPI
 
+source "drivers/isdn/gigaset/Kconfig"
+
 endif # ISDN
diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c
index 29419a8d31d..16f2e465e5f 100644
--- a/drivers/isdn/capi/capiutil.c
+++ b/drivers/isdn/capi/capiutil.c
@@ -490,7 +490,14 @@ static void pars_2_message(_cmsg * cmsg)
 	}
 }
 
-/*-------------------------------------------------------*/
+/**
+ * capi_cmsg2message() - assemble CAPI 2.0 message from _cmsg structure
+ * @cmsg:	_cmsg structure
+ * @msg:	buffer for assembled message
+ *
+ * Return value: 0 for success
+ */
+
 unsigned capi_cmsg2message(_cmsg * cmsg, u8 * msg)
 {
 	cmsg->m = msg;
@@ -553,7 +560,14 @@ static void message_2_pars(_cmsg * cmsg)
 	}
 }
 
-/*-------------------------------------------------------*/
+/**
+ * capi_message2cmsg() - disassemble CAPI 2.0 message into _cmsg structure
+ * @cmsg:	_cmsg structure
+ * @msg:	buffer for assembled message
+ *
+ * Return value: 0 for success
+ */
+
 unsigned capi_message2cmsg(_cmsg * cmsg, u8 * msg)
 {
 	memset(cmsg, 0, sizeof(_cmsg));
@@ -573,7 +587,18 @@ unsigned capi_message2cmsg(_cmsg * cmsg, u8 * msg)
 	return 0;
 }
 
-/*-------------------------------------------------------*/
+/**
+ * capi_cmsg_header() - initialize header part of _cmsg structure
+ * @cmsg:	_cmsg structure
+ * @_ApplId:	ApplID field value
+ * @_Command:	Command field value
+ * @_Subcommand:	Subcommand field value
+ * @_Messagenumber:	Message Number field value
+ * @_Controller:	Controller/PLCI/NCCI field value
+ *
+ * Return value: 0 for success
+ */
+
 unsigned capi_cmsg_header(_cmsg * cmsg, u16 _ApplId,
 			  u8 _Command, u8 _Subcommand,
 			  u16 _Messagenumber, u32 _Controller)
@@ -641,6 +666,14 @@ static char *mnames[] =
 	[0x4e] = "MANUFACTURER_RESP"
 };
 
+/**
+ * capi_cmd2str() - convert CAPI 2.0 command/subcommand number to name
+ * @cmd:	command number
+ * @subcmd:	subcommand number
+ *
+ * Return value: static string, NULL if command/subcommand unknown
+ */
+
 char *capi_cmd2str(u8 cmd, u8 subcmd)
 {
 	return mnames[command_2_index(cmd, subcmd)];
@@ -879,6 +912,11 @@ init:
 	return cdb;
 }
 
+/**
+ * cdebbuf_free() - free CAPI debug buffer
+ * @cdb:	buffer to free
+ */
+
 void cdebbuf_free(_cdebbuf *cdb)
 {
 	if (likely(cdb == g_debbuf)) {
@@ -891,6 +929,16 @@ void cdebbuf_free(_cdebbuf *cdb)
 }
 
 
+/**
+ * capi_message2str() - format CAPI 2.0 message for printing
+ * @msg:	CAPI 2.0 message
+ *
+ * Allocates a CAPI debug buffer and fills it with a printable representation
+ * of the CAPI 2.0 message in @msg.
+ * Return value: allocated debug buffer, NULL on error
+ * The returned buffer should be freed by a call to cdebbuf_free() after use.
+ */
+
 _cdebbuf *capi_message2str(u8 * msg)
 {
 	_cdebbuf *cdb;
@@ -926,10 +974,23 @@ _cdebbuf *capi_message2str(u8 * msg)
 	return cdb;
 }
 
+/**
+ * capi_cmsg2str() - format _cmsg structure for printing
+ * @cmsg:	_cmsg structure
+ *
+ * Allocates a CAPI debug buffer and fills it with a printable representation
+ * of the CAPI 2.0 message stored in @cmsg by a previous call to
+ * capi_cmsg2message() or capi_message2cmsg().
+ * Return value: allocated debug buffer, NULL on error
+ * The returned buffer should be freed by a call to cdebbuf_free() after use.
+ */
+
 _cdebbuf *capi_cmsg2str(_cmsg * cmsg)
 {
 	_cdebbuf *cdb;
 
+	if (!cmsg->m)
+		return NULL;	/* no message */
 	cdb = cdebbuf_alloc();
 	if (!cdb)
 		return NULL;
diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index f33170368cd..57d26360f64 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -377,14 +377,14 @@ void capi_ctr_ready(struct capi_ctr * card)
 EXPORT_SYMBOL(capi_ctr_ready);
 
 /**
- * capi_ctr_reseted() - signal CAPI controller reset
+ * capi_ctr_down() - signal CAPI controller not ready
  * @card:	controller descriptor structure.
  *
  * Called by hardware driver to signal that the controller is down and
  * unavailable for use.
  */
 
-void capi_ctr_reseted(struct capi_ctr * card)
+void capi_ctr_down(struct capi_ctr * card)
 {
 	u16 appl;
 
@@ -413,7 +413,7 @@ void capi_ctr_reseted(struct capi_ctr * card)
 	notify_push(KCI_CONTRDOWN, card->cnr, 0, 0);
 }
 
-EXPORT_SYMBOL(capi_ctr_reseted);
+EXPORT_SYMBOL(capi_ctr_down);
 
 /**
  * capi_ctr_suspend_output() - suspend controller
@@ -517,7 +517,7 @@ EXPORT_SYMBOL(attach_capi_ctr);
 int detach_capi_ctr(struct capi_ctr *card)
 {
         if (card->cardstate != CARD_DETECTED)
-		capi_ctr_reseted(card);
+		capi_ctr_down(card);
 
 	ncards--;
 
diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c
index 7d97d54588d..77e9fdda059 100644
--- a/drivers/isdn/divert/isdn_divert.c
+++ b/drivers/isdn/divert/isdn_divert.c
@@ -183,7 +183,7 @@ int cf_command(int drvid, int mode,
           (mode != 1) ? "" : " 0 ",
           (mode != 1) ? "" : fwd_nr);
  
-  retval = divert_if.ll_cmd(&cs->ics); /* excute command */
+  retval = divert_if.ll_cmd(&cs->ics); /* execute command */
 
   if (!retval)
    { cs->prev = NULL;
diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig
index 9ca889adf12..18ab8652aa5 100644
--- a/drivers/isdn/gigaset/Kconfig
+++ b/drivers/isdn/gigaset/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ISDN_DRV_GIGASET
 	tristate "Siemens Gigaset support"
+	depends on ISDN_I4L
 	select CRC_CCITT
 	select BITREVERSE
 	help
@@ -42,11 +43,4 @@ config GIGASET_DEBUG
 	  This enables debugging code in the Gigaset drivers.
 	  If in doubt, say yes.
 
-config GIGASET_UNDOCREQ
-	bool "Support for undocumented USB requests"
-	help
-	  This enables support for USB requests we only know from
-	  reverse engineering (currently M105 only). If you need
-	  features like configuration mode of M105, say yes.
-
 endif # ISDN_DRV_GIGASET
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index 2a4ce96f04b..234cc5d5331 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -174,9 +174,8 @@ byte_stuff:
 
 				if (unlikely(fcs != PPP_GOODFCS)) {
 					dev_err(cs->dev,
-					    "Packet checksum at %lu failed, "
-					    "packet is corrupted (%u bytes)!\n",
-					    bcs->rcvbytes, skb->len);
+				"Checksum failed, %u bytes corrupted!\n",
+						skb->len);
 					compskb = NULL;
 					gigaset_rcv_error(compskb, cs, bcs);
 					error = 1;
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 0048ce98bfa..e4141bf8b2f 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -565,8 +565,6 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs,
 	gig_dbg(DEBUG_INIT, "setting up bcs[%d]->at_state", channel);
 	gigaset_at_init(&bcs->at_state, bcs, cs, -1);
 
-	bcs->rcvbytes = 0;
-
 #ifdef CONFIG_GIGASET_DEBUG
 	bcs->emptycount = 0;
 #endif
@@ -672,14 +670,8 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
 	cs->tty = NULL;
 	cs->tty_dev = NULL;
 	cs->cidmode = cidmode != 0;
-
-	//if(onechannel) { //FIXME
-		cs->tabnocid = gigaset_tab_nocid_m10x;
-		cs->tabcid = gigaset_tab_cid_m10x;
-	//} else {
-	//	cs->tabnocid = gigaset_tab_nocid;
-	//	cs->tabcid = gigaset_tab_cid;
-	//}
+	cs->tabnocid = gigaset_tab_nocid;
+	cs->tabcid = gigaset_tab_cid;
 
 	init_waitqueue_head(&cs->waitqueue);
 	cs->waiting = 0;
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index e582a4887bc..ec5169604a6 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -160,7 +160,7 @@
 
 
 // 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid), 400: hup, 500: reset, 600: dial, 700: ring
-struct reply_t gigaset_tab_nocid_m10x[]= /* with dle mode */
+struct reply_t gigaset_tab_nocid[] =
 {
 	/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
 
@@ -280,7 +280,7 @@ struct reply_t gigaset_tab_nocid_m10x[]= /* with dle mode */
 };
 
 // 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring, 400: hup, 750: accepted icall
-struct reply_t gigaset_tab_cid_m10x[] = /* for M10x */
+struct reply_t gigaset_tab_cid[] =
 {
 	/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
 
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 747178f03d2..a2f6125739e 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -282,8 +282,8 @@ struct reply_t {
 	char	*command;	/* NULL==none */
 };
 
-extern struct reply_t gigaset_tab_cid_m10x[];
-extern struct reply_t gigaset_tab_nocid_m10x[];
+extern struct reply_t gigaset_tab_cid[];
+extern struct reply_t gigaset_tab_nocid[];
 
 struct inbuf_t {
 	unsigned char		*rcvbuf;	/* usb-gigaset receive buffer */
@@ -384,7 +384,6 @@ struct bc_state {
 	int trans_up;			/* Counter of packages (upstream) */
 
 	struct at_state_t at_state;
-	unsigned long rcvbytes;
 
 	__u16 fcs;
 	struct sk_buff *skb;
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 69a702f0db9..9b22f9cf2f3 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -544,11 +544,11 @@ int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid)
 
 	gig_dbg(DEBUG_ANY, "Register driver capabilities to LL");
 
-	//iif->id[sizeof(iif->id) - 1]=0;
-	//strncpy(iif->id, isdnid, sizeof(iif->id) - 1);
 	if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index)
-	    >= sizeof iif->id)
-		return -ENOMEM; //FIXME EINVAL/...??
+	    >= sizeof iif->id) {
+		pr_err("ID too long: %s\n", isdnid);
+		return 0;
+	}
 
 	iif->owner = THIS_MODULE;
 	iif->channels = cs->channels;
@@ -568,8 +568,10 @@ int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid)
 	iif->rcvcallb_skb = NULL;		/* Will be set by LL */
 	iif->statcallb = NULL;			/* Will be set by LL */
 
-	if (!register_isdn(iif))
+	if (!register_isdn(iif)) {
+		pr_err("register_isdn failed\n");
 		return 0;
+	}
 
 	cs->myid = iif->channels;		/* Set my device id */
 	return 1;
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 820a30923fe..1ebfcab7466 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -599,8 +599,7 @@ void gigaset_if_init(struct cardstate *cs)
 	if (!IS_ERR(cs->tty_dev))
 		dev_set_drvdata(cs->tty_dev, cs);
 	else {
-		dev_warn(cs->dev,
-			 "could not register device to the tty subsystem\n");
+		pr_warning("could not register device to the tty subsystem\n");
 		cs->tty_dev = NULL;
 	}
 	mutex_unlock(&cs->mutex);
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 29808c4fb1c..db3a1e4cd48 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -246,6 +246,10 @@ static inline void dump_bytes(enum debuglevel level, const char *tag,
 	unsigned char c;
 	static char dbgline[3 * 32 + 1];
 	int i = 0;
+
+	if (!(gigaset_debuglevel & level))
+		return;
+
 	while (count-- > 0) {
 		if (i > sizeof(dbgline) - 4) {
 			dbgline[i] = '\0';
diff --git a/drivers/isdn/gigaset/proc.c b/drivers/isdn/gigaset/proc.c
index da6f3acf9fd..9715aad9c3f 100644
--- a/drivers/isdn/gigaset/proc.c
+++ b/drivers/isdn/gigaset/proc.c
@@ -79,5 +79,5 @@ void gigaset_init_dev_sysfs(struct cardstate *cs)
 
 	gig_dbg(DEBUG_INIT, "setting up sysfs");
 	if (device_create_file(cs->tty_dev, &dev_attr_cidmode))
-		dev_err(cs->dev, "could not create sysfs attribute\n");
+		pr_err("could not create sysfs attribute\n");
 }
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index d7838516609..4deb1ab0dbf 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -153,8 +153,6 @@ static inline unsigned tiocm_to_gigaset(unsigned state)
 	return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
 }
 
-#ifdef CONFIG_GIGASET_UNDOCREQ
-/* WARNING: EXPERIMENTAL! */
 static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
 				  unsigned new_state)
 {
@@ -176,6 +174,11 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
 	return 0;
 }
 
+/*
+ * Set M105 configuration value
+ * using undocumented device commands reverse engineered from USB traces
+ * of the Siemens Windows driver
+ */
 static int set_value(struct cardstate *cs, u8 req, u16 val)
 {
 	struct usb_device *udev = cs->hw.usb->udev;
@@ -205,8 +208,10 @@ static int set_value(struct cardstate *cs, u8 req, u16 val)
 	return r < 0 ? r : (r2 < 0 ? r2 : 0);
 }
 
-/* WARNING: HIGHLY EXPERIMENTAL! */
-// don't use this in an interrupt/BH
+/*
+ * set the baud rate on the internal serial adapter
+ * using the undocumented parameter setting command
+ */
 static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
 {
 	u16 val;
@@ -237,8 +242,10 @@ static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
 	return set_value(cs, 1, val);
 }
 
-/* WARNING: HIGHLY EXPERIMENTAL! */
-// don't use this in an interrupt/BH
+/*
+ * set the line format on the internal serial adapter
+ * using the undocumented parameter setting command
+ */
 static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
 {
 	u16 val = 0;
@@ -274,24 +281,6 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
 	return set_value(cs, 3, val);
 }
 
-#else
-static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
-				  unsigned new_state)
-{
-	return -ENOTTY;
-}
-
-static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
-{
-	return -ENOTTY;
-}
-
-static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
-{
-	return -ENOTTY;
-}
-#endif
-
 
  /*================================================================================================================*/
 static int gigaset_init_bchannel(struct bc_state *bcs)
@@ -362,10 +351,8 @@ static void gigaset_modem_fill(unsigned long data)
 	} while (again);
 }
 
-/**
- *	gigaset_read_int_callback
- *
- *	It is called if the data was received from the device.
+/*
+ * Interrupt Input URB completion routine
  */
 static void gigaset_read_int_callback(struct urb *urb)
 {
@@ -567,18 +554,19 @@ static int gigaset_chars_in_buffer(struct cardstate *cs)
 	return cs->cmdbytes;
 }
 
+/*
+ * set the break characters on the internal serial adapter
+ * using undocumented device commands reverse engineered from USB traces
+ * of the Siemens Windows driver
+ */
 static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
 {
-#ifdef CONFIG_GIGASET_UNDOCREQ
 	struct usb_device *udev = cs->hw.usb->udev;
 
 	gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf);
 	memcpy(cs->hw.usb->bchars, buf, 6);
 	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
 			       0, 0, &buf, 6, 2000);
-#else
-	return -ENOTTY;
-#endif
 }
 
 static int gigaset_freebcshw(struct bc_state *bcs)
@@ -625,7 +613,6 @@ static int gigaset_initcshw(struct cardstate *cs)
 	ucs->bchars[5] = 0x13;
 	ucs->bulk_out_buffer = NULL;
 	ucs->bulk_out_urb = NULL;
-	//ucs->urb_cmd_out = NULL;
 	ucs->read_urb = NULL;
 	tasklet_init(&cs->write_tasklet,
 		     &gigaset_modem_fill, (unsigned long) cs);
@@ -742,7 +729,7 @@ static int gigaset_probe(struct usb_interface *interface,
 	cs->dev = &interface->dev;
 
 	/* save address of controller structure */
-	usb_set_intfdata(interface, cs); // dev_set_drvdata(&interface->dev, cs);
+	usb_set_intfdata(interface, cs);
 
 	endpoint = &hostif->endpoint[0].desc;
 
@@ -921,8 +908,7 @@ static const struct gigaset_ops ops = {
 	gigaset_m10x_input,
 };
 
-/**
- *	usb_gigaset_init
+/*
  * This function is called while kernel-module is loaded
  */
 static int __init usb_gigaset_init(void)
@@ -952,9 +938,7 @@ error:
 	return -1;
 }
 
-
-/**
- *	usb_gigaset_exit
+/*
  * This function is called while unloading the kernel-module
  */
 static void __exit usb_gigaset_exit(void)
diff --git a/drivers/isdn/hardware/avm/b1.c b/drivers/isdn/hardware/avm/b1.c
index abf05ec3176..a7c0083e78a 100644
--- a/drivers/isdn/hardware/avm/b1.c
+++ b/drivers/isdn/hardware/avm/b1.c
@@ -330,7 +330,7 @@ void b1_reset_ctr(struct capi_ctr *ctrl)
 	spin_lock_irqsave(&card->lock, flags);
 	capilib_release(&cinfo->ncci_head);
 	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 }
 
 void b1_register_appl(struct capi_ctr *ctrl,
diff --git a/drivers/isdn/hardware/avm/b1dma.c b/drivers/isdn/hardware/avm/b1dma.c
index da34b98e3de..0e84aaae43f 100644
--- a/drivers/isdn/hardware/avm/b1dma.c
+++ b/drivers/isdn/hardware/avm/b1dma.c
@@ -759,7 +759,7 @@ void b1dma_reset_ctr(struct capi_ctr *ctrl)
 	memset(cinfo->version, 0, sizeof(cinfo->version));
 	capilib_release(&cinfo->ncci_head);
 	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 }
 
 /* ------------------------------------------------------------- */
diff --git a/drivers/isdn/hardware/avm/c4.c b/drivers/isdn/hardware/avm/c4.c
index 9df1d3f66c8..6833301a45f 100644
--- a/drivers/isdn/hardware/avm/c4.c
+++ b/drivers/isdn/hardware/avm/c4.c
@@ -681,7 +681,7 @@ static irqreturn_t c4_handle_interrupt(avmcard *card)
 			spin_lock_irqsave(&card->lock, flags);
 			capilib_release(&cinfo->ncci_head);
 			spin_unlock_irqrestore(&card->lock, flags);
-			capi_ctr_reseted(&cinfo->capi_ctrl);
+			capi_ctr_down(&cinfo->capi_ctrl);
 		}
 		card->nlogcontr = 0;
 		return IRQ_HANDLED;
@@ -909,7 +909,7 @@ static void c4_reset_ctr(struct capi_ctr *ctrl)
         for (i=0; i < card->nr_controllers; i++) {
 		cinfo = &card->ctrlinfo[i];
 		memset(cinfo->version, 0, sizeof(cinfo->version));
-		capi_ctr_reseted(&cinfo->capi_ctrl);
+		capi_ctr_down(&cinfo->capi_ctrl);
 	}
 	card->nlogcontr = 0;
 }
diff --git a/drivers/isdn/hardware/avm/t1isa.c b/drivers/isdn/hardware/avm/t1isa.c
index e7724493738..1c53fd49adb 100644
--- a/drivers/isdn/hardware/avm/t1isa.c
+++ b/drivers/isdn/hardware/avm/t1isa.c
@@ -339,7 +339,7 @@ static void t1isa_reset_ctr(struct capi_ctr *ctrl)
 	spin_lock_irqsave(&card->lock, flags);
 	capilib_release(&cinfo->ncci_head);
 	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 }
 
 static void t1isa_remove(struct pci_dev *pdev)
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index fd112ae252c..3024566dd09 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -13,7 +13,7 @@ config MISDN_HFCPCI
 
 config MISDN_HFCMULTI
 	tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
-	depends on PCI
+	depends on PCI || 8xx
 	depends on MISDN
 	help
 	  Enable support for cards with Cologne Chip AG's HFC multiport
@@ -23,6 +23,15 @@ config MISDN_HFCMULTI
 	   * HFC-8S (8 S/T interfaces on one chip)
 	   * HFC-E1 (E1 interface for 2Mbit ISDN)
 
+config MISDN_HFCMULTI_8xx
+	boolean "Support for XHFC embedded board in HFC multiport driver"
+	depends on MISDN
+	depends on MISDN_HFCMULTI
+	depends on 8xx
+	default 8xx
+	help
+	  Enable support for the XHFC embedded solution from Speech Design.
+
 config MISDN_HFCUSB
 	tristate "Support for HFC-S USB based TAs"
 	depends on USB
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
index 663b77f578b..0c773866efc 100644
--- a/drivers/isdn/hardware/mISDN/hfc_multi.h
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -17,6 +17,16 @@
 #define	PCI_ENA_REGIO	0x01
 #define	PCI_ENA_MEMIO	0x02
 
+#define XHFC_IRQ	4		/* SIU_IRQ2 */
+#define XHFC_MEMBASE	0xFE000000
+#define XHFC_MEMSIZE    0x00001000
+#define XHFC_OFFSET	0x00001000
+#define PA_XHFC_A0	0x0020		/* PA10 */
+#define PB_XHFC_IRQ1	0x00000100	/* PB23 */
+#define PB_XHFC_IRQ2	0x00000200	/* PB22 */
+#define PB_XHFC_IRQ3	0x00000400	/* PB21 */
+#define PB_XHFC_IRQ4	0x00000800	/* PB20 */
+
 /*
  * NOTE: some registers are assigned multiple times due to different modes
  *       also registers are assigned differen for HFC-4s/8s and HFC-E1
@@ -44,6 +54,7 @@ struct hfc_chan {
 	int		conf;	/* conference setting of TX slot */
 	int		txpending;	/* if there is currently data in */
 					/* the FIFO 0=no, 1=yes, 2=splloop */
+	int		Zfill;	/* rx-fifo level on last hfcmulti_tx */
 	int		rx_off; /* set to turn fifo receive off */
 	int		coeff_count; /* curren coeff block */
 	s32		*coeff; /* memory pointer to 8 coeff blocks */
@@ -62,6 +73,7 @@ struct hfcm_hw {
 	u_char	r_sci_msk;
 	u_char	r_tx0, r_tx1;
 	u_char	a_st_ctrl0[8];
+	u_char	r_bert_wd_md;
 	timer_t	timer;
 };
 
@@ -79,6 +91,11 @@ struct hfcm_hw {
 #define	HFC_CFG_CRC4		10 /* disable CRC-4 Multiframe mode, */
 					/* use double frame instead. */
 
+#define HFC_TYPE_E1		1 /* controller is HFC-E1 */
+#define HFC_TYPE_4S		4 /* controller is HFC-4S */
+#define HFC_TYPE_8S		8 /* controller is HFC-8S */
+#define HFC_TYPE_XHFC		5 /* controller is XHFC */
+
 #define	HFC_CHIP_EXRAM_128	0 /* external ram 128k */
 #define	HFC_CHIP_EXRAM_512	1 /* external ram 256k */
 #define	HFC_CHIP_REVISION0	2 /* old fifo handling */
@@ -86,19 +103,22 @@ struct hfcm_hw {
 #define	HFC_CHIP_PCM_MASTER	4 /* PCM is master */
 #define	HFC_CHIP_RX_SYNC	5 /* disable pll sync for pcm */
 #define	HFC_CHIP_DTMF		6 /* DTMF decoding is enabled */
-#define	HFC_CHIP_ULAW		7 /* ULAW mode */
-#define	HFC_CHIP_CLOCK2		8 /* double clock mode */
-#define	HFC_CHIP_E1CLOCK_GET	9 /* always get clock from E1 interface */
-#define	HFC_CHIP_E1CLOCK_PUT	10 /* always put clock from E1 interface */
-#define	HFC_CHIP_WATCHDOG	11 /* whether we should send signals */
+#define	HFC_CHIP_CONF		7 /* conference handling is enabled */
+#define	HFC_CHIP_ULAW		8 /* ULAW mode */
+#define	HFC_CHIP_CLOCK2		9 /* double clock mode */
+#define	HFC_CHIP_E1CLOCK_GET	10 /* always get clock from E1 interface */
+#define	HFC_CHIP_E1CLOCK_PUT	11 /* always put clock from E1 interface */
+#define	HFC_CHIP_WATCHDOG	12 /* whether we should send signals */
 					/* to the watchdog */
-#define	HFC_CHIP_B410P		12 /* whether we have a b410p with echocan in */
+#define	HFC_CHIP_B410P		13 /* whether we have a b410p with echocan in */
 					/* hw */
-#define	HFC_CHIP_PLXSD		13 /* whether we have a Speech-Design PLX */
+#define	HFC_CHIP_PLXSD		14 /* whether we have a Speech-Design PLX */
+#define	HFC_CHIP_EMBSD          15 /* whether we have a SD Embedded board */
 
 #define HFC_IO_MODE_PCIMEM	0x00 /* normal memory mapped IO */
 #define HFC_IO_MODE_REGIO	0x01 /* PCI io access */
 #define HFC_IO_MODE_PLXSD	0x02 /* access HFC via PLX9030 */
+#define HFC_IO_MODE_EMBSD	0x03 /* direct access */
 
 /* table entry in the PCI devices list */
 struct hm_map {
@@ -111,6 +131,7 @@ struct hm_map {
 	int opticalsupport;
 	int dip_type;
 	int io_mode;
+	int irq;
 };
 
 struct hfc_multi {
@@ -118,7 +139,7 @@ struct hfc_multi {
 	struct hm_map	*mtyp;
 	int		id;
 	int		pcm;	/* id of pcm bus */
-	int		type;
+	int		ctype;	/* controller type */
 	int		ports;
 
 	u_int		irq;	/* irq used by card */
@@ -158,10 +179,16 @@ struct hfc_multi {
 				int len);
 	void		(*write_fifo)(struct hfc_multi *hc, u_char *data,
 				int len);
-	u_long		pci_origmembase, plx_origmembase, dsp_origmembase;
+	u_long		pci_origmembase, plx_origmembase;
 	void __iomem	*pci_membase; /* PCI memory */
 	void __iomem	*plx_membase; /* PLX memory */
-	u_char		*dsp_membase; /* DSP on PLX */
+	u_long		xhfc_origmembase;
+	u_char		*xhfc_membase;
+	u_long		*xhfc_memaddr, *xhfc_memdata;
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+	struct immap	*immap;
+#endif
+	u_long		pb_irqmsk;	/* Portbit mask to check the IRQ line */
 	u_long		pci_iobase; /* PCI IO */
 	struct hfcm_hw	hw;	/* remember data of write-only-registers */
 
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h b/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h
new file mode 100644
index 00000000000..45ddced956d
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h
@@ -0,0 +1,167 @@
+/*
+ * For License see notice in hfc_multi.c
+ *
+ * special IO and init functions for the embedded XHFC board
+ * from Speech Design
+ *
+ */
+
+#include <asm/8xx_immap.h>
+
+/* Change this to the value used by your board */
+#ifndef IMAP_ADDR
+#define IMAP_ADDR	0xFFF00000
+#endif
+
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val,
+		const char *function, int line)
+#else
+HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	writeb(reg, hc->xhfc_memaddr);
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	writeb(val, hc->xhfc_memdata);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_embsd(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	writeb(reg, hc->xhfc_memaddr);
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	return readb(hc->xhfc_memdata);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_embsd(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	writeb(reg, hc->xhfc_memaddr);
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	return readb(hc->xhfc_memdata);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_embsd(struct hfc_multi *hc)
+#endif
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	writeb(R_STATUS, hc->xhfc_memaddr);
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	while (readb(hc->xhfc_memdata) & V_BUSY)
+		cpu_relax();
+}
+
+/* write fifo data (EMBSD) */
+void
+write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	*hc->xhfc_memaddr = A_FIFO_DATA0;
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	while (len) {
+		*hc->xhfc_memdata = *data;
+		data++;
+		len--;
+	}
+}
+
+/* read fifo data (EMBSD) */
+void
+read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len)
+{
+	hc->immap->im_ioport.iop_padat |= PA_XHFC_A0;
+	*hc->xhfc_memaddr = A_FIFO_DATA0;
+	hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0);
+	while (len) {
+		*data = (u_char)(*hc->xhfc_memdata);
+		data++;
+		len--;
+	}
+}
+
+static int
+setup_embedded(struct hfc_multi *hc, struct hm_map *m)
+{
+	printk(KERN_INFO
+	    "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
+	    m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
+
+	hc->pci_dev = NULL;
+	if (m->clock2)
+		test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
+
+	hc->leds = m->leds;
+	hc->ledstate = 0xAFFEAFFE;
+	hc->opticalsupport = m->opticalsupport;
+
+	hc->pci_iobase = 0;
+	hc->pci_membase = 0;
+	hc->xhfc_membase = NULL;
+	hc->xhfc_memaddr = NULL;
+	hc->xhfc_memdata = NULL;
+
+	/* set memory access methods */
+	if (m->io_mode) /* use mode from card config */
+		hc->io_mode = m->io_mode;
+	switch (hc->io_mode) {
+	case HFC_IO_MODE_EMBSD:
+		test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip);
+		hc->slots = 128; /* required */
+		/* fall through */
+		hc->HFC_outb = HFC_outb_embsd;
+		hc->HFC_inb = HFC_inb_embsd;
+		hc->HFC_inw = HFC_inw_embsd;
+		hc->HFC_wait = HFC_wait_embsd;
+		hc->read_fifo = read_fifo_embsd;
+		hc->write_fifo = write_fifo_embsd;
+		hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id;
+		hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase,
+				XHFC_MEMSIZE);
+		if (!hc->xhfc_membase) {
+			printk(KERN_WARNING
+			    "HFC-multi: failed to remap xhfc address space. "
+			    "(internal error)\n");
+			return -EIO;
+		}
+		hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4);
+		hc->xhfc_memdata = (u_long *)(hc->xhfc_membase);
+		printk(KERN_INFO
+		    "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx "
+		    "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n",
+		    (u_long)hc->xhfc_membase, hc->xhfc_origmembase,
+		    (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata);
+		break;
+	default:
+		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+		return -EIO;
+	}
+
+	/* Prepare the MPC8XX PortA 10 as output (address/data selector) */
+	hc->immap = (struct immap *)(IMAP_ADDR);
+	hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0);
+	hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0);
+	hc->immap->im_ioport.iop_padir |=   PA_XHFC_A0;
+
+	/* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */
+	hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id);
+	hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk);
+	hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk);
+	hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk);
+
+	/* At this point the needed config is done */
+	/* fifos are still not enabled */
+	return 0;
+}
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 0b28141e43b..e1dab30aed3 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -104,7 +104,7 @@
  *	If unsure, don't give this parameter.
  *
  * dslot:
- *	NOTE: only one poll value must be given for every card.
+ *	NOTE: only one dslot value must be given for every card.
  *	Also this value must be given for non-E1 cards. If omitted, the E1
  *	card has D-channel on time slot 16, which is default.
  *	If 1..15 or 17..31, an alternate time slot is used for D-channel.
@@ -139,6 +139,10 @@
  *	Selects interface with clock source for mISDN and applications.
  *	Set to card number starting with 1. Set to -1 to disable.
  *	By default, the first card is used as clock source.
+ *
+ * hwid:
+ *	NOTE: only one hwid value must be given once
+ * 	Enable special embedded devices with XHFC controllers.
  */
 
 /*
@@ -206,6 +210,11 @@ static int	clock;
 static uint	timer;
 static uint	clockdelay_te = CLKDEL_TE;
 static uint	clockdelay_nt = CLKDEL_NT;
+#define HWID_NONE	0
+#define HWID_MINIP4	1
+#define HWID_MINIP8	2
+#define HWID_MINIP16	3
+static uint	hwid = HWID_NONE;
 
 static int	HFC_cnt, Port_cnt, PCM_cnt = 99;
 
@@ -223,6 +232,7 @@ module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR);
 module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR);
 module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
 module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+module_param(hwid, uint, S_IRUGO | S_IWUSR); /* The hardware ID */
 
 #ifdef HFC_REGISTER_DEBUG
 #define HFC_outb(hc, reg, val) \
@@ -252,6 +262,10 @@ module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
 #define HFC_wait_nodebug(hc)		(hc->HFC_wait_nodebug(hc))
 #endif
 
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+#include "hfc_multi_8xx.h"
+#endif
+
 /* HFC_IO_MODE_PCIMEM */
 static void
 #ifdef HFC_REGISTER_DEBUG
@@ -261,7 +275,7 @@ HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
 HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
 #endif
 {
-	writeb(val, (hc->pci_membase)+reg);
+	writeb(val, hc->pci_membase + reg);
 }
 static u_char
 #ifdef HFC_REGISTER_DEBUG
@@ -270,7 +284,7 @@ HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
 HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
 #endif
 {
-	return readb((hc->pci_membase)+reg);
+	return readb(hc->pci_membase + reg);
 }
 static u_short
 #ifdef HFC_REGISTER_DEBUG
@@ -279,7 +293,7 @@ HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
 HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
 #endif
 {
-	return readw((hc->pci_membase)+reg);
+	return readw(hc->pci_membase + reg);
 }
 static void
 #ifdef HFC_REGISTER_DEBUG
@@ -288,7 +302,8 @@ HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
 HFC_wait_pcimem(struct hfc_multi *hc)
 #endif
 {
-	while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
+	while (readb(hc->pci_membase + R_STATUS) & V_BUSY)
+		cpu_relax();
 }
 
 /* HFC_IO_MODE_REGIO */
@@ -300,7 +315,7 @@ HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
 HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
 #endif
 {
-	outb(reg, (hc->pci_iobase)+4);
+	outb(reg, hc->pci_iobase + 4);
 	outb(val, hc->pci_iobase);
 }
 static u_char
@@ -310,7 +325,7 @@ HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
 HFC_inb_regio(struct hfc_multi *hc, u_char reg)
 #endif
 {
-	outb(reg, (hc->pci_iobase)+4);
+	outb(reg, hc->pci_iobase + 4);
 	return inb(hc->pci_iobase);
 }
 static u_short
@@ -320,7 +335,7 @@ HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
 HFC_inw_regio(struct hfc_multi *hc, u_char reg)
 #endif
 {
-	outb(reg, (hc->pci_iobase)+4);
+	outb(reg, hc->pci_iobase + 4);
 	return inw(hc->pci_iobase);
 }
 static void
@@ -330,8 +345,9 @@ HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
 HFC_wait_regio(struct hfc_multi *hc)
 #endif
 {
-	outb(R_STATUS, (hc->pci_iobase)+4);
-	while (inb(hc->pci_iobase) & V_BUSY);
+	outb(R_STATUS, hc->pci_iobase + 4);
+	while (inb(hc->pci_iobase) & V_BUSY)
+		cpu_relax();
 }
 
 #ifdef HFC_REGISTER_DEBUG
@@ -350,14 +366,14 @@ HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
 	if (regname[0] == '\0')
 		strcpy(regname, "register");
 
-	bits[7] = '0'+(!!(val&1));
-	bits[6] = '0'+(!!(val&2));
-	bits[5] = '0'+(!!(val&4));
-	bits[4] = '0'+(!!(val&8));
-	bits[3] = '0'+(!!(val&16));
-	bits[2] = '0'+(!!(val&32));
-	bits[1] = '0'+(!!(val&64));
-	bits[0] = '0'+(!!(val&128));
+	bits[7] = '0' + (!!(val & 1));
+	bits[6] = '0' + (!!(val & 2));
+	bits[5] = '0' + (!!(val & 4));
+	bits[4] = '0' + (!!(val & 8));
+	bits[3] = '0' + (!!(val & 16));
+	bits[2] = '0' + (!!(val & 32));
+	bits[1] = '0' + (!!(val & 64));
+	bits[0] = '0' + (!!(val & 128));
 	printk(KERN_DEBUG
 	    "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
 	    hc->id, reg, regname, val, bits, function, line);
@@ -380,14 +396,14 @@ HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
 	if (regname[0] == '\0')
 		strcpy(regname, "register");
 
-	bits[7] = '0'+(!!(val&1));
-	bits[6] = '0'+(!!(val&2));
-	bits[5] = '0'+(!!(val&4));
-	bits[4] = '0'+(!!(val&8));
-	bits[3] = '0'+(!!(val&16));
-	bits[2] = '0'+(!!(val&32));
-	bits[1] = '0'+(!!(val&64));
-	bits[0] = '0'+(!!(val&128));
+	bits[7] = '0' + (!!(val & 1));
+	bits[6] = '0' + (!!(val & 2));
+	bits[5] = '0' + (!!(val & 4));
+	bits[4] = '0' + (!!(val & 8));
+	bits[3] = '0' + (!!(val & 16));
+	bits[2] = '0' + (!!(val & 32));
+	bits[1] = '0' + (!!(val & 64));
+	bits[0] = '0' + (!!(val & 128));
 	printk(KERN_DEBUG
 	    "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
 	    hc->id, reg, regname, val, bits, function, line);
@@ -467,6 +483,7 @@ write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
 		len--;
 	}
 }
+
 /* read fifo data (REGIO) */
 static void
 read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
@@ -512,7 +529,6 @@ read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
 	}
 }
 
-
 static void
 enable_hwirq(struct hfc_multi *hc)
 {
@@ -928,7 +944,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 			writel(pv, plx_acc_32);
 			if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
 				pcmmaster = hc;
-				if (hc->type == 1) {
+				if (hc->ctype == HFC_TYPE_E1) {
 					if (debug & DEBUG_HFCMULTI_PLXSD)
 						printk(KERN_DEBUG
 							"Schedule SYNC_I\n");
@@ -949,7 +965,8 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 		pv |= PLX_SYNC_O_EN;
 		writel(pv, plx_acc_32);
 		/* switch to jatt PLL, if not disabled by RX_SYNC */
-		if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
+		if (hc->ctype == HFC_TYPE_E1
+				&& !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
 			if (debug & DEBUG_HFCMULTI_PLXSD)
 				printk(KERN_DEBUG "Schedule jatt PLL\n");
 			hc->e1_resync |= 2; /* switch to jatt */
@@ -961,7 +978,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 				printk(KERN_DEBUG
 					"id=%d (0x%p) = PCM master syncronized "
 					"with QUARTZ\n", hc->id, hc);
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				/* Use the crystal clock for the PCM
 				   master card */
 				if (debug & DEBUG_HFCMULTI_PLXSD)
@@ -972,7 +989,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
 				if (debug & DEBUG_HFCMULTI_PLXSD)
 					printk(KERN_DEBUG
 					    "QUARTZ is automatically "
-					    "enabled by HFC-%dS\n", hc->type);
+					    "enabled by HFC-%dS\n", hc->ctype);
 			}
 			plx_acc_32 = hc->plx_membase + PLX_GPIOC;
 			pv = readl(plx_acc_32);
@@ -996,7 +1013,7 @@ plxsd_checksync(struct hfc_multi *hc, int rm)
 	if (hc->syncronized) {
 		if (syncmaster == NULL) {
 			if (debug & DEBUG_HFCMULTI_PLXSD)
-				printk(KERN_WARNING "%s: GOT sync on card %d"
+				printk(KERN_DEBUG "%s: GOT sync on card %d"
 					" (id=%d)\n", __func__, hc->id + 1,
 					hc->id);
 			hfcmulti_resync(hc, hc, rm);
@@ -1004,7 +1021,7 @@ plxsd_checksync(struct hfc_multi *hc, int rm)
 	} else {
 		if (syncmaster == hc) {
 			if (debug & DEBUG_HFCMULTI_PLXSD)
-				printk(KERN_WARNING "%s: LOST sync on card %d"
+				printk(KERN_DEBUG "%s: LOST sync on card %d"
 					" (id=%d)\n", __func__, hc->id + 1,
 					hc->id);
 			hfcmulti_resync(hc, NULL, rm);
@@ -1053,20 +1070,23 @@ release_io_hfcmulti(struct hfc_multi *hc)
 		pv &= ~PLX_DSP_RES_N;
 		writel(pv, plx_acc_32);
 		if (debug & DEBUG_HFCMULTI_INIT)
-			printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
+			printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n",
 				__func__, pv);
 		spin_unlock_irqrestore(&plx_lock, plx_flags);
 	}
 
 	/* disable memory mapped ports / io ports */
 	test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
-	pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
+	if (hc->pci_dev)
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
 	if (hc->pci_membase)
 		iounmap(hc->pci_membase);
 	if (hc->plx_membase)
 		iounmap(hc->plx_membase);
 	if (hc->pci_iobase)
 		release_region(hc->pci_iobase, 8);
+	if (hc->xhfc_membase)
+		iounmap((void *)hc->xhfc_membase);
 
 	if (hc->pci_dev) {
 		pci_disable_device(hc->pci_dev);
@@ -1100,8 +1120,9 @@ init_chip(struct hfc_multi *hc)
 	/* revision check */
 	if (debug & DEBUG_HFCMULTI_INIT)
 		printk(KERN_DEBUG "%s: entered\n", __func__);
-	val = HFC_inb(hc, R_CHIP_ID)>>4;
-	if (val != 0x8 && val != 0xc && val != 0xe) {
+	val = HFC_inb(hc, R_CHIP_ID);
+	if ((val >> 4) != 0x8 && (val >> 4) != 0xc && (val >> 4) != 0xe &&
+	    (val >> 1) != 0x31) {
 		printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
 		err = -EIO;
 		goto out;
@@ -1109,8 +1130,9 @@ init_chip(struct hfc_multi *hc)
 	rev = HFC_inb(hc, R_CHIP_RV);
 	printk(KERN_INFO
 	    "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
-	    val, rev, (rev == 0) ? " (old FIFO handling)" : "");
-	if (rev == 0) {
+	    val, rev, (rev == 0 && (hc->ctype != HFC_TYPE_XHFC)) ?
+		" (old FIFO handling)" : "");
+	if (hc->ctype != HFC_TYPE_XHFC && rev == 0) {
 		test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
 		printk(KERN_WARNING
 		    "HFC_multi: NOTE: Your chip is revision 0, "
@@ -1152,6 +1174,12 @@ init_chip(struct hfc_multi *hc)
 		hc->Zlen = 8000;
 		hc->DTMFbase = 0x2000;
 	}
+	if (hc->ctype == HFC_TYPE_XHFC) {
+		hc->Flen = 0x8;
+		hc->Zmin = 0x0;
+		hc->Zlen = 64;
+		hc->DTMFbase = 0x0;
+	}
 	hc->max_trans = poll << 1;
 	if (hc->max_trans > hc->Zlen)
 		hc->max_trans = hc->Zlen;
@@ -1176,7 +1204,7 @@ init_chip(struct hfc_multi *hc)
 		writel(pv, plx_acc_32);
 		spin_unlock_irqrestore(&plx_lock, plx_flags);
 		if (debug & DEBUG_HFCMULTI_INIT)
-			printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
+			printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n",
 				__func__, pv);
 		/*
 		 * If we are the 3rd PLXSD card or higher, we must turn
@@ -1204,13 +1232,17 @@ init_chip(struct hfc_multi *hc)
 			writel(pv, plx_acc_32);
 			spin_unlock_irqrestore(&plx_lock, plx_flags);
 			if (debug & DEBUG_HFCMULTI_INIT)
-			    printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
-					__func__, pv);
+				printk(KERN_DEBUG
+				    "%s: term off: PLX_GPIO=%x\n",
+				    __func__, pv);
 		}
 		spin_unlock_irqrestore(&HFClock, hfc_flags);
 		hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
 	}
 
+	if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+		hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
+
 	/* we only want the real Z2 read-pointer for revision > 0 */
 	if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
 		hc->hw.r_ram_sz |= V_FZ_MD;
@@ -1234,15 +1266,24 @@ init_chip(struct hfc_multi *hc)
 
 	/* soft reset */
 	HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
-	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+	if (hc->ctype == HFC_TYPE_XHFC)
+		HFC_outb(hc, 0x0C /* R_FIFO_THRES */,
+				0x11 /* 16 Bytes TX/RX */);
+	else
+		HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
 	HFC_outb(hc, R_FIFO_MD, 0);
-	hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
+	if (hc->ctype == HFC_TYPE_XHFC)
+		hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES;
+	else
+		hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES
+			| V_RLD_EPR;
 	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
 	udelay(100);
 	hc->hw.r_cirm = 0;
 	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
 	udelay(100);
-	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+	if (hc->ctype != HFC_TYPE_XHFC)
+		HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
 
 	/* Speech Design PLX bridge pcm and sync mode */
 	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
@@ -1254,13 +1295,13 @@ init_chip(struct hfc_multi *hc)
 			pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
 			pv |= PLX_SYNC_O_EN;
 			if (debug & DEBUG_HFCMULTI_INIT)
-				printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
+				printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n",
 					__func__, pv);
 		} else {
 			pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
 			pv &= ~PLX_SYNC_O_EN;
 			if (debug & DEBUG_HFCMULTI_INIT)
-				printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
+				printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n",
 					__func__, pv);
 		}
 		writel(pv, plx_acc_32);
@@ -1278,13 +1319,16 @@ init_chip(struct hfc_multi *hc)
 	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
 	if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
 		HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
+	else if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+		HFC_outb(hc, R_PCM_MD2, 0x10); /* V_C2O_EN */
 	else
 		HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
 	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
 	for (i = 0; i < 256; i++) {
 		HFC_outb_nodebug(hc, R_SLOT, i);
 		HFC_outb_nodebug(hc, A_SL_CFG, 0);
-		HFC_outb_nodebug(hc, A_CONF, 0);
+		if (hc->ctype != HFC_TYPE_XHFC)
+			HFC_outb_nodebug(hc, A_CONF, 0);
 		hc->slot_owner[i] = -1;
 	}
 
@@ -1296,6 +1340,9 @@ init_chip(struct hfc_multi *hc)
 		HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
 	}
 
+	if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+		HFC_outb(hc, 0x02 /* R_CLK_CFG */, 0x40 /* V_CLKO_OFF */);
+
 	/* B410P GPIO */
 	if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
 		printk(KERN_NOTICE "Setting GPIOs\n");
@@ -1366,8 +1413,8 @@ controller_fail:
 				writel(pv, plx_acc_32);
 				spin_unlock_irqrestore(&plx_lock, plx_flags);
 				if (debug & DEBUG_HFCMULTI_INIT)
-				    printk(KERN_WARNING "%s: master: PLX_GPIO"
-					"=%x\n", __func__, pv);
+					printk(KERN_DEBUG "%s: master: "
+					    "PLX_GPIO=%x\n", __func__, pv);
 			}
 			hc->hw.r_pcm_md0 |= V_PCM_MD;
 			HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
@@ -1401,7 +1448,7 @@ controller_fail:
 		writel(pv, plx_acc_32);
 		spin_unlock_irqrestore(&plx_lock, plx_flags);
 		if (debug & DEBUG_HFCMULTI_INIT)
-			printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
+			printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n",
 				__func__, pv);
 	}
 
@@ -1424,7 +1471,7 @@ controller_fail:
 	hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
 
 	/* set E1 state machine IRQ */
-	if (hc->type == 1)
+	if (hc->ctype == HFC_TYPE_E1)
 		hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
 
 	/* set DTMF detection */
@@ -1444,7 +1491,8 @@ controller_fail:
 		r_conf_en = V_CONF_EN | V_ULAW;
 	else
 		r_conf_en = V_CONF_EN;
-	HFC_outb(hc, R_CONF_EN, r_conf_en);
+	if (hc->ctype != HFC_TYPE_XHFC)
+		HFC_outb(hc, R_CONF_EN, r_conf_en);
 
 	/* setting leds */
 	switch (hc->leds) {
@@ -1468,16 +1516,23 @@ controller_fail:
 		break;
 	}
 
+	if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) {
+		hc->hw.r_st_sync = 0x10; /* V_AUTO_SYNCI */
+		HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
+	}
+
 	/* set master clock */
 	if (hc->masterclk >= 0) {
 		if (debug & DEBUG_HFCMULTI_INIT)
 			printk(KERN_DEBUG "%s: setting ST master clock "
 			    "to port %d (0..%d)\n",
 			    __func__, hc->masterclk, hc->ports-1);
-		hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
+		hc->hw.r_st_sync |= (hc->masterclk | V_AUTO_SYNC);
 		HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
 	}
 
+
+
 	/* setting misc irq */
 	HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
 	if (debug & DEBUG_HFCMULTI_INIT)
@@ -1817,8 +1872,8 @@ hfcmulti_dtmf(struct hfc_multi *hc)
 			coeff[(co<<1)|1] = mantissa;
 		}
 		if (debug & DEBUG_HFCMULTI_DTMF)
-			printk("%s: DTMF ready %08x %08x %08x %08x "
-			    "%08x %08x %08x %08x\n", __func__,
+			printk(" DTMF ready %08x %08x %08x %08x "
+			    "%08x %08x %08x %08x\n",
 			    coeff[0], coeff[1], coeff[2], coeff[3],
 			    coeff[4], coeff[5], coeff[6], coeff[7]);
 		hc->chan[ch].coeff_count++;
@@ -1826,7 +1881,7 @@ hfcmulti_dtmf(struct hfc_multi *hc)
 			hc->chan[ch].coeff_count = 0;
 			skb = mI_alloc_skb(512, GFP_ATOMIC);
 			if (!skb) {
-				printk(KERN_WARNING "%s: No memory for skb\n",
+				printk(KERN_DEBUG "%s: No memory for skb\n",
 				    __func__);
 				continue;
 			}
@@ -1929,7 +1984,7 @@ next_frame:
 				Fspace = 1;
 		}
 		/* one frame only for ST D-channels, to allow resending */
-		if (hc->type != 1 && dch) {
+		if (hc->ctype != HFC_TYPE_E1 && dch) {
 			if (f1 != f2)
 				Fspace = 0;
 		}
@@ -1945,6 +2000,9 @@ next_frame:
 				"%d!=%d\n", __func__, hc->id + 1, temp, z2);
 		z2 = temp; /* repeat unti Z2 is equal */
 	}
+	hc->chan[ch].Zfill = z1 - z2;
+	if (hc->chan[ch].Zfill < 0)
+		hc->chan[ch].Zfill += hc->Zlen;
 	Zspace = z2 - z1;
 	if (Zspace <= 0)
 		Zspace += hc->Zlen;
@@ -1968,12 +2026,22 @@ next_frame:
 					    "slot_tx %d\n",
 					    __func__, ch, slot_tx);
 				/* connect slot */
-				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
-				    V_HDLC_TRP | V_IFF);
+				if (hc->ctype == HFC_TYPE_XHFC)
+					HFC_outb(hc, A_CON_HDLC, 0xc0
+					    | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+						/* Enable FIFO, no interrupt */
+				else
+					HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+					    V_HDLC_TRP | V_IFF);
 				HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
 				HFC_wait_nodebug(hc);
-				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
-				    V_HDLC_TRP | V_IFF);
+				if (hc->ctype == HFC_TYPE_XHFC)
+					HFC_outb(hc, A_CON_HDLC, 0xc0
+					    | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+						/* Enable FIFO, no interrupt */
+				else
+					HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+					    V_HDLC_TRP | V_IFF);
 				HFC_outb_nodebug(hc, R_FIFO, ch<<1);
 				HFC_wait_nodebug(hc);
 			}
@@ -2001,10 +2069,22 @@ next_frame:
 			    "FIFO data: channel %d slot_tx %d\n",
 			    __func__, ch, slot_tx);
 		/* disconnect slot */
-		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		if (hc->ctype == HFC_TYPE_XHFC)
+			HFC_outb(hc, A_CON_HDLC, 0x80
+			    | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+				/* Enable FIFO, no interrupt */
+		else
+			HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 |
+			    V_HDLC_TRP | V_IFF);
 		HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
 		HFC_wait_nodebug(hc);
-		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		if (hc->ctype == HFC_TYPE_XHFC)
+			HFC_outb(hc, A_CON_HDLC, 0x80
+			    | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+				/* Enable FIFO, no interrupt */
+		else
+			HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 |
+			    V_HDLC_TRP | V_IFF);
 		HFC_outb_nodebug(hc, R_FIFO, ch<<1);
 		HFC_wait_nodebug(hc);
 	}
@@ -2027,10 +2107,11 @@ next_frame:
 		printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
 		    "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
 			__func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
-			temp ? "HDLC":"TRANS");
+			temp ? "HDLC" : "TRANS");
 
 	/* Have to prep the audio data */
 	hc->write_fifo(hc, d, ii - i);
+	hc->chan[ch].Zfill += ii - i;
 	*idxp = ii;
 
 	/* if not all data has been written */
@@ -2226,7 +2307,7 @@ next_frame:
 			if (dch)
 				recv_Dchannel(dch);
 			else
-				recv_Bchannel(bch);
+				recv_Bchannel(bch, MISDN_ID_ANY);
 			*sp = skb;
 			again++;
 			goto next_frame;
@@ -2258,7 +2339,7 @@ next_frame:
 			    "(z1=%04x, z2=%04x) TRANS\n",
 				__func__, hc->id + 1, ch, Zsize, z1, z2);
 		/* only bch is transparent */
-		recv_Bchannel(bch);
+		recv_Bchannel(bch, hc->chan[ch].Zfill);
 		*sp = skb;
 	}
 }
@@ -2323,7 +2404,7 @@ handle_timer_irq(struct hfc_multi *hc)
 		spin_unlock_irqrestore(&HFClock, flags);
 	}
 
-	if (hc->type != 1 || hc->e1_state == 1)
+	if (hc->ctype != HFC_TYPE_E1 || hc->e1_state == 1)
 		for (ch = 0; ch <= 31; ch++) {
 			if (hc->created[hc->chan[ch].port]) {
 				hfcmulti_tx(hc, ch);
@@ -2346,7 +2427,7 @@ handle_timer_irq(struct hfc_multi *hc)
 				}
 			}
 		}
-	if (hc->type == 1 && hc->created[0]) {
+	if (hc->ctype == HFC_TYPE_E1 && hc->created[0]) {
 		dch = hc->chan[hc->dslot].dch;
 		if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
 			/* LOS */
@@ -2606,7 +2687,10 @@ hfcmulti_interrupt(int intno, void *dev_id)
 		"card %d, this is no bug.\n", hc->id + 1, irqsem);
 	irqsem = hc->id + 1;
 #endif
-
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+	if (hc->immap->im_cpm.cp_pbdat & hc->pb_irqmsk)
+		goto irq_notforus;
+#endif
 	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
 		spin_lock_irqsave(&plx_lock, flags);
 		plx_acc = hc->plx_membase + PLX_INTCSR;
@@ -2646,7 +2730,7 @@ hfcmulti_interrupt(int intno, void *dev_id)
 	}
 	hc->irqcnt++;
 	if (r_irq_statech) {
-		if (hc->type != 1)
+		if (hc->ctype != HFC_TYPE_E1)
 			ph_state_irq(hc, r_irq_statech);
 	}
 	if (status & V_EXT_IRQSTA)
@@ -2660,7 +2744,7 @@ hfcmulti_interrupt(int intno, void *dev_id)
 		r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
 		r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */
 		if (r_irq_misc & V_STA_IRQ) {
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				/* state machine */
 				dch = hc->chan[hc->dslot].dch;
 				e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
@@ -2699,13 +2783,13 @@ hfcmulti_interrupt(int intno, void *dev_id)
 			handle_timer_irq(hc);
 		}
 
-		if (r_irq_misc & V_DTMF_IRQ) {
+		if (r_irq_misc & V_DTMF_IRQ)
 			hfcmulti_dtmf(hc);
-		}
+
 		if (r_irq_misc & V_IRQ_PROC) {
 			static int irq_proc_cnt;
 			if (!irq_proc_cnt++)
-				printk(KERN_WARNING "%s: got V_IRQ_PROC -"
+				printk(KERN_DEBUG "%s: got V_IRQ_PROC -"
 				    " this should not happen\n", __func__);
 		}
 
@@ -2782,7 +2866,8 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		if (hc->slot_owner[oslot_tx<<1] == ch) {
 			HFC_outb(hc, R_SLOT, oslot_tx << 1);
 			HFC_outb(hc, A_SL_CFG, 0);
-			HFC_outb(hc, A_CONF, 0);
+			if (hc->ctype != HFC_TYPE_XHFC)
+				HFC_outb(hc, A_CONF, 0);
 			hc->slot_owner[oslot_tx<<1] = -1;
 		} else {
 			if (debug & DEBUG_HFCMULTI_MODE)
@@ -2835,7 +2920,9 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 			    flow_tx, routing, conf);
 		HFC_outb(hc, R_SLOT, slot_tx << 1);
 		HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
-		HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
+		if (hc->ctype != HFC_TYPE_XHFC)
+			HFC_outb(hc, A_CONF,
+				(conf < 0) ? 0 : (conf | V_CONF_SL));
 		hc->slot_owner[slot_tx << 1] = ch;
 		hc->chan[ch].slot_tx = slot_tx;
 		hc->chan[ch].bank_tx = bank_tx;
@@ -2852,7 +2939,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		else
 			flow_rx = 0xc0; /* ST->(FIFO,PCM) */
 		/* put on slot */
-		routing = bank_rx?0x80:0xc0; /* reversed */
+		routing = bank_rx ? 0x80 : 0xc0; /* reversed */
 		if (conf >= 0 || bank_rx > 1)
 			routing = 0x40; /* loop */
 		if (debug & DEBUG_HFCMULTI_MODE)
@@ -2885,9 +2972,9 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		HFC_outb(hc, A_IRQ_MSK, 0);
 		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
 		HFC_wait(hc);
-		if (hc->chan[ch].bch && hc->type != 1) {
+		if (hc->chan[ch].bch && hc->ctype != HFC_TYPE_E1) {
 			hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
-			    ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
+			    ((ch & 0x3) == 0) ? ~V_B1_EN : ~V_B2_EN;
 			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
 			/* undocumented: delay after R_ST_SEL */
 			udelay(1);
@@ -2961,8 +3048,13 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 			/* enable TX fifo */
 			HFC_outb(hc, R_FIFO, ch << 1);
 			HFC_wait(hc);
-			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
-			    V_HDLC_TRP | V_IFF);
+			if (hc->ctype == HFC_TYPE_XHFC)
+				HFC_outb(hc, A_CON_HDLC, flow_tx | 0x07 << 2 |
+					V_HDLC_TRP | V_IFF);
+					/* Enable FIFO, no interrupt */
+			else
+				HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
+					V_HDLC_TRP | V_IFF);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
 			HFC_outb(hc, A_IRQ_MSK, 0);
 			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
@@ -2972,13 +3064,19 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 			/* enable RX fifo */
 			HFC_outb(hc, R_FIFO, (ch<<1)|1);
 			HFC_wait(hc);
-			HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
+			if (hc->ctype == HFC_TYPE_XHFC)
+				HFC_outb(hc, A_CON_HDLC, flow_rx | 0x07 << 2 |
+					V_HDLC_TRP);
+					/* Enable FIFO, no interrupt*/
+			else
+				HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 |
+						V_HDLC_TRP);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
 			HFC_outb(hc, A_IRQ_MSK, 0);
 			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
 			HFC_wait(hc);
 		}
-		if (hc->type != 1) {
+		if (hc->ctype != HFC_TYPE_E1) {
 			hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
 			    ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
 			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
@@ -2999,7 +3097,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		/* enable TX fifo */
 		HFC_outb(hc, R_FIFO, ch<<1);
 		HFC_wait(hc);
-		if (hc->type == 1 || hc->chan[ch].bch) {
+		if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) {
 			/* E1 or B-channel */
 			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
@@ -3015,7 +3113,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		HFC_outb(hc, R_FIFO, (ch<<1)|1);
 		HFC_wait(hc);
 		HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
-		if (hc->type == 1 || hc->chan[ch].bch)
+		if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch)
 			HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
 		else
 			HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
@@ -3024,7 +3122,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 		HFC_wait(hc);
 		if (hc->chan[ch].bch) {
 			test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
-			if (hc->type != 1) {
+			if (hc->ctype != HFC_TYPE_E1) {
 				hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
 				  ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
 				HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
@@ -3104,7 +3202,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd)
 	case HW_RESET_REQ:
 		/* start activation */
 		spin_lock_irqsave(&hc->lock, flags);
-		if (hc->type == 1) {
+		if (hc->ctype == HFC_TYPE_E1) {
 			if (debug & DEBUG_HFCMULTI_MSG)
 				printk(KERN_DEBUG
 				    "%s: HW_RESET_REQ no BRI\n",
@@ -3125,7 +3223,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd)
 	case HW_DEACT_REQ:
 		/* start deactivation */
 		spin_lock_irqsave(&hc->lock, flags);
-		if (hc->type == 1) {
+		if (hc->ctype == HFC_TYPE_E1) {
 			if (debug & DEBUG_HFCMULTI_MSG)
 				printk(KERN_DEBUG
 				    "%s: HW_DEACT_REQ no BRI\n",
@@ -3159,7 +3257,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd)
 		break;
 	case HW_POWERUP_REQ:
 		spin_lock_irqsave(&hc->lock, flags);
-		if (hc->type == 1) {
+		if (hc->ctype == HFC_TYPE_E1) {
 			if (debug & DEBUG_HFCMULTI_MSG)
 				printk(KERN_DEBUG
 				    "%s: HW_POWERUP_REQ no BRI\n",
@@ -3236,7 +3334,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 				    __func__, hc->chan[dch->slot].port,
 				    hc->ports-1);
 			/* start activation */
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				ph_state_change(dch);
 				if (debug & DEBUG_HFCMULTI_STATE)
 					printk(KERN_DEBUG
@@ -3269,7 +3367,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 				    __func__, hc->chan[dch->slot].port,
 				    hc->ports-1);
 			/* start deactivation */
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				if (debug & DEBUG_HFCMULTI_MSG)
 					printk(KERN_DEBUG
 					    "%s: PH_DEACTIVATE no BRI\n",
@@ -3410,9 +3508,9 @@ handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 		switch (hh->id) {
 		case HFC_SPL_LOOP_ON: /* set sample loop */
 			if (debug & DEBUG_HFCMULTI_MSG)
-			printk(KERN_DEBUG
-			    "%s: HFC_SPL_LOOP_ON (len = %d)\n",
-			    __func__, skb->len);
+				printk(KERN_DEBUG
+				    "%s: HFC_SPL_LOOP_ON (len = %d)\n",
+				    __func__, skb->len);
 			ret = 0;
 			break;
 		case HFC_SPL_LOOP_OFF: /* set silence */
@@ -3489,6 +3587,8 @@ channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
 		features->hfc_id = hc->id;
 		if (test_bit(HFC_CHIP_DTMF, &hc->chip))
 			features->hfc_dtmf = 1;
+		if (test_bit(HFC_CHIP_CONF, &hc->chip))
+			features->hfc_conf = 1;
 		features->hfc_loops = 0;
 		if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
 			features->hfc_echocanhw = 1;
@@ -3619,14 +3719,13 @@ ph_state_change(struct dchannel *dch)
 	int ch, i;
 
 	if (!dch) {
-		printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
-		    __func__);
+		printk(KERN_WARNING "%s: ERROR given dch is NULL\n", __func__);
 		return;
 	}
 	hc = dch->hw;
 	ch = dch->slot;
 
-	if (hc->type == 1) {
+	if (hc->ctype == HFC_TYPE_E1) {
 		if (dch->dev.D.protocol == ISDN_P_TE_E1) {
 			if (debug & DEBUG_HFCMULTI_STATE)
 				printk(KERN_DEBUG
@@ -3641,14 +3740,15 @@ ph_state_change(struct dchannel *dch)
 		switch (dch->state) {
 		case (1):
 			if (hc->e1_state != 1) {
-			    for (i = 1; i <= 31; i++) {
-				/* reset fifos on e1 activation */
-				HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
-				HFC_wait_nodebug(hc);
-				HFC_outb_nodebug(hc,
-					R_INC_RES_FIFO, V_RES_F);
-				HFC_wait_nodebug(hc);
-			    }
+				for (i = 1; i <= 31; i++) {
+					/* reset fifos on e1 activation */
+					HFC_outb_nodebug(hc, R_FIFO,
+						(i << 1) | 1);
+					HFC_wait_nodebug(hc);
+					HFC_outb_nodebug(hc, R_INC_RES_FIFO,
+						V_RES_F);
+					HFC_wait_nodebug(hc);
+				}
 			}
 			test_and_set_bit(FLG_ACTIVE, &dch->Flags);
 			_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
@@ -3751,7 +3851,7 @@ hfcmulti_initmode(struct dchannel *dch)
 	if (debug & DEBUG_HFCMULTI_INIT)
 		printk(KERN_DEBUG "%s: entered\n", __func__);
 
-	if (hc->type == 1) {
+	if (hc->ctype == HFC_TYPE_E1) {
 		hc->chan[hc->dslot].slot_tx = -1;
 		hc->chan[hc->dslot].slot_rx = -1;
 		hc->chan[hc->dslot].conf = -1;
@@ -3900,6 +4000,11 @@ hfcmulti_initmode(struct dchannel *dch)
 		}
 		if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
 			hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
+		if (hc->ctype == HFC_TYPE_XHFC) {
+			hc->hw.a_st_ctrl0[pt] |= 0x40 /* V_ST_PU_CTRL */;
+			HFC_outb(hc, 0x35 /* A_ST_CTRL3 */,
+				0x7c << 1 /* V_ST_PULSE */);
+		}
 		/* line setup */
 		HFC_outb(hc, A_ST_CTRL0,  hc->hw.a_st_ctrl0[pt]);
 		/* disable E-channel */
@@ -3943,12 +4048,12 @@ open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
 		return -EINVAL;
 	if ((dch->dev.D.protocol != ISDN_P_NONE) &&
 	    (dch->dev.D.protocol != rq->protocol)) {
-	    if (debug & DEBUG_HFCMULTI_MODE)
-		printk(KERN_WARNING "%s: change protocol %x to %x\n",
-		    __func__, dch->dev.D.protocol, rq->protocol);
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: change protocol %x to %x\n",
+			    __func__, dch->dev.D.protocol, rq->protocol);
 	}
-	if ((dch->dev.D.protocol == ISDN_P_TE_S0)
-	 && (rq->protocol != ISDN_P_TE_S0))
+	if ((dch->dev.D.protocol == ISDN_P_TE_S0) &&
+	    (rq->protocol != ISDN_P_TE_S0))
 		l1_event(dch->l1, CLOSE_CHANNEL);
 	if (dch->dev.D.protocol != rq->protocol) {
 		if (rq->protocol == ISDN_P_TE_S0) {
@@ -3986,7 +4091,7 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
 		return -EINVAL;
 	if (rq->protocol == ISDN_P_NONE)
 		return -EINVAL;
-	if (hc->type == 1)
+	if (hc->ctype == HFC_TYPE_E1)
 		ch = rq->adr.channel;
 	else
 		ch = (rq->adr.channel - 1) + (dch->slot - 2);
@@ -4013,11 +4118,41 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
 static int
 channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
 {
+	struct hfc_multi	*hc = dch->hw;
 	int	ret = 0;
+	int	wd_mode, wd_cnt;
 
 	switch (cq->op) {
 	case MISDN_CTRL_GETOP:
-		cq->op = 0;
+		cq->op = MISDN_CTRL_HFC_OP;
+		break;
+	case MISDN_CTRL_HFC_WD_INIT: /* init the watchdog */
+		wd_cnt = cq->p1 & 0xf;
+		wd_mode = !!(cq->p1 >> 4);
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s"
+			    ", counter 0x%x\n", __func__,
+			    wd_mode ? "AUTO" : "MANUAL", wd_cnt);
+		/* set the watchdog timer */
+		HFC_outb(hc, R_TI_WD, poll_timer | (wd_cnt << 4));
+		hc->hw.r_bert_wd_md = (wd_mode ? V_AUTO_WD_RES : 0);
+		if (hc->ctype == HFC_TYPE_XHFC)
+			hc->hw.r_bert_wd_md |= 0x40 /* V_WD_EN */;
+		/* init the watchdog register and reset the counter */
+		HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			/* enable the watchdog output for Speech-Design */
+			HFC_outb(hc, R_GPIO_SEL,  V_GPIO_SEL7);
+			HFC_outb(hc, R_GPIO_EN1,  V_GPIO_EN15);
+			HFC_outb(hc, R_GPIO_OUT1, 0);
+			HFC_outb(hc, R_GPIO_OUT1, V_GPIO_OUT15);
+		}
+		break;
+	case MISDN_CTRL_HFC_WD_RESET: /* reset the watchdog counter */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n",
+			    __func__);
+		HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
 		break;
 	default:
 		printk(KERN_WARNING "%s: unknown Op %x\n",
@@ -4047,7 +4182,7 @@ hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 		switch (rq->protocol) {
 		case ISDN_P_TE_S0:
 		case ISDN_P_NT_S0:
-			if (hc->type == 1) {
+			if (hc->ctype == HFC_TYPE_E1) {
 				err = -EINVAL;
 				break;
 			}
@@ -4055,7 +4190,7 @@ hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 			break;
 		case ISDN_P_TE_E1:
 		case ISDN_P_NT_E1:
-			if (hc->type != 1) {
+			if (hc->ctype != HFC_TYPE_E1) {
 				err = -EINVAL;
 				break;
 			}
@@ -4122,13 +4257,13 @@ init_card(struct hfc_multi *hc)
 	disable_hwirq(hc);
 	spin_unlock_irqrestore(&hc->lock, flags);
 
-	if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
+	if (request_irq(hc->irq, hfcmulti_interrupt, IRQF_SHARED,
 	    "HFC-multi", hc)) {
 		printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
-		    hc->pci_dev->irq);
+		    hc->irq);
+		hc->irq = 0;
 		return -EIO;
 	}
-	hc->irq = hc->pci_dev->irq;
 
 	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
 		spin_lock_irqsave(&plx_lock, plx_flags);
@@ -4187,7 +4322,7 @@ error:
 	}
 
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
+		printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq);
 	if (hc->irq) {
 		free_irq(hc->irq, hc);
 		hc->irq = 0;
@@ -4235,6 +4370,10 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 	hc->ledstate = 0xAFFEAFFE;
 	hc->opticalsupport = m->opticalsupport;
 
+	hc->pci_iobase = 0;
+	hc->pci_membase = NULL;
+	hc->plx_membase = NULL;
+
 	/* set memory access methods */
 	if (m->io_mode) /* use mode from card config */
 		hc->io_mode = m->io_mode;
@@ -4242,44 +4381,12 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 	case HFC_IO_MODE_PLXSD:
 		test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
 		hc->slots = 128; /* required */
-		/* fall through */
-	case HFC_IO_MODE_PCIMEM:
 		hc->HFC_outb = HFC_outb_pcimem;
 		hc->HFC_inb = HFC_inb_pcimem;
 		hc->HFC_inw = HFC_inw_pcimem;
 		hc->HFC_wait = HFC_wait_pcimem;
 		hc->read_fifo = read_fifo_pcimem;
 		hc->write_fifo = write_fifo_pcimem;
-		break;
-	case HFC_IO_MODE_REGIO:
-		hc->HFC_outb = HFC_outb_regio;
-		hc->HFC_inb = HFC_inb_regio;
-		hc->HFC_inw = HFC_inw_regio;
-		hc->HFC_wait = HFC_wait_regio;
-		hc->read_fifo = read_fifo_regio;
-		hc->write_fifo = write_fifo_regio;
-		break;
-	default:
-		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
-		pci_disable_device(hc->pci_dev);
-		return -EIO;
-	}
-	hc->HFC_outb_nodebug = hc->HFC_outb;
-	hc->HFC_inb_nodebug = hc->HFC_inb;
-	hc->HFC_inw_nodebug = hc->HFC_inw;
-	hc->HFC_wait_nodebug = hc->HFC_wait;
-#ifdef HFC_REGISTER_DEBUG
-	hc->HFC_outb = HFC_outb_debug;
-	hc->HFC_inb = HFC_inb_debug;
-	hc->HFC_inw = HFC_inw_debug;
-	hc->HFC_wait = HFC_wait_debug;
-#endif
-	hc->pci_iobase = 0;
-	hc->pci_membase = NULL;
-	hc->plx_membase = NULL;
-
-	switch (hc->io_mode) {
-	case HFC_IO_MODE_PLXSD:
 		hc->plx_origmembase =  hc->pci_dev->resource[0].start;
 		/* MEMBASE 1 is PLX PCI Bridge */
 
@@ -4327,6 +4434,12 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
 		break;
 	case HFC_IO_MODE_PCIMEM:
+		hc->HFC_outb = HFC_outb_pcimem;
+		hc->HFC_inb = HFC_inb_pcimem;
+		hc->HFC_inw = HFC_inw_pcimem;
+		hc->HFC_wait = HFC_wait_pcimem;
+		hc->read_fifo = read_fifo_pcimem;
+		hc->write_fifo = write_fifo_pcimem;
 		hc->pci_origmembase = hc->pci_dev->resource[1].start;
 		if (!hc->pci_origmembase) {
 			printk(KERN_WARNING
@@ -4343,12 +4456,18 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
 			pci_disable_device(hc->pci_dev);
 			return -EIO;
 		}
-		printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
-		    "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
+		printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ "
+		    "%d HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
 		    hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
 		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
 		break;
 	case HFC_IO_MODE_REGIO:
+		hc->HFC_outb = HFC_outb_regio;
+		hc->HFC_inb = HFC_inb_regio;
+		hc->HFC_inw = HFC_inw_regio;
+		hc->HFC_wait = HFC_wait_regio;
+		hc->read_fifo = read_fifo_regio;
+		hc->write_fifo = write_fifo_regio;
 		hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
 		if (!hc->pci_iobase) {
 			printk(KERN_WARNING
@@ -4430,7 +4549,7 @@ release_port(struct hfc_multi *hc, struct dchannel *dch)
 		dch->timer.function = NULL;
 	}
 
-	if (hc->type == 1) { /* E1 */
+	if (hc->ctype == HFC_TYPE_E1) { /* E1 */
 		/* remove sync */
 		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
 			hc->syncronized = 0;
@@ -4508,7 +4627,7 @@ release_card(struct hfc_multi *hc)
 	int	ch;
 
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: release card (%d) entered\n",
+		printk(KERN_DEBUG "%s: release card (%d) entered\n",
 		    __func__, hc->id);
 
 	/* unregister clock source */
@@ -4537,7 +4656,7 @@ release_card(struct hfc_multi *hc)
 	/* release hardware & irq */
 	if (hc->irq) {
 		if (debug & DEBUG_HFCMULTI_INIT)
-			printk(KERN_WARNING "%s: free irq %d\n",
+			printk(KERN_DEBUG "%s: free irq %d\n",
 			    __func__, hc->irq);
 		free_irq(hc->irq, hc);
 		hc->irq = 0;
@@ -4546,17 +4665,17 @@ release_card(struct hfc_multi *hc)
 	release_io_hfcmulti(hc);
 
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: remove instance from list\n",
+		printk(KERN_DEBUG "%s: remove instance from list\n",
 		     __func__);
 	list_del(&hc->list);
 
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: delete instance\n", __func__);
+		printk(KERN_DEBUG "%s: delete instance\n", __func__);
 	if (hc == syncmaster)
 		syncmaster = NULL;
 	kfree(hc);
 	if (debug & DEBUG_HFCMULTI_INIT)
-		printk(KERN_WARNING "%s: card successfully removed\n",
+		printk(KERN_DEBUG "%s: card successfully removed\n",
 		    __func__);
 }
 
@@ -4579,7 +4698,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m)
 	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
 	dch->dev.D.send = handle_dmsg;
 	dch->dev.D.ctrl = hfcm_dctrl;
-	dch->dev.nrbchan = (hc->dslot)?30:31;
+	dch->dev.nrbchan = (hc->dslot) ? 30 : 31;
 	dch->slot = hc->dslot;
 	hc->chan[hc->dslot].dch = dch;
 	hc->chan[hc->dslot].port = 0;
@@ -4821,7 +4940,7 @@ init_multi_port(struct hfc_multi *hc, int pt)
 	}
 	/* disable E-channel */
 	if (port[Port_cnt] & 0x004) {
-	if (debug & DEBUG_HFCMULTI_INIT)
+		if (debug & DEBUG_HFCMULTI_INIT)
 			printk(KERN_DEBUG
 			    "%s: PROTOCOL disable E-channel: "
 			    "card(%d) port(%d)\n",
@@ -4829,9 +4948,15 @@ init_multi_port(struct hfc_multi *hc, int pt)
 		test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
 		    &hc->chan[i + 2].cfg);
 	}
-	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d",
-		hc->type, HFC_cnt + 1, pt + 1);
-	ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
+	if (hc->ctype == HFC_TYPE_XHFC) {
+		snprintf(name, MISDN_MAX_IDLEN - 1, "xhfc.%d-%d",
+			HFC_cnt + 1, pt + 1);
+		ret = mISDN_register_device(&dch->dev, NULL, name);
+	} else {
+		snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d",
+			hc->ctype, HFC_cnt + 1, pt + 1);
+		ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
+	}
 	if (ret)
 		goto free_chan;
 	hc->created[pt] = 1;
@@ -4842,9 +4967,9 @@ free_chan:
 }
 
 static int
-hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+hfcmulti_init(struct hm_map *m, struct pci_dev *pdev,
+    const struct pci_device_id *ent)
 {
-	struct hm_map	*m = (struct hm_map *)ent->driver_data;
 	int		ret_err = 0;
 	int		pt;
 	struct hfc_multi	*hc;
@@ -4879,16 +5004,18 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	spin_lock_init(&hc->lock);
 	hc->mtyp = m;
-	hc->type =  m->type;
+	hc->ctype =  m->type;
 	hc->ports = m->ports;
 	hc->id = HFC_cnt;
 	hc->pcm = pcm[HFC_cnt];
 	hc->io_mode = iomode[HFC_cnt];
-	if (dslot[HFC_cnt] < 0 && hc->type == 1) {
+	if (dslot[HFC_cnt] < 0 && hc->ctype == HFC_TYPE_E1) {
 		hc->dslot = 0;
 		printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
 			"31 B-channels\n");
-	} if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 && hc->type == 1) {
+	}
+	if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32
+	    && hc->ctype == HFC_TYPE_E1) {
 		hc->dslot = dslot[HFC_cnt];
 		printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
 			"time slot %d\n", dslot[HFC_cnt]);
@@ -4910,8 +5037,11 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 	for (i = 0; i < (poll >> 1); i++)
 		hc->silence_data[i] = hc->silence;
 
-	if (!(type[HFC_cnt] & 0x200))
-		test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+	if (hc->ctype != HFC_TYPE_XHFC) {
+		if (!(type[HFC_cnt] & 0x200))
+			test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+		test_and_set_bit(HFC_CHIP_CONF, &hc->chip);
+	}
 
 	if (type[HFC_cnt] & 0x800)
 		test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
@@ -4935,8 +5065,18 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		printk(KERN_NOTICE "Watchdog enabled\n");
 	}
 
-	/* setup pci, hc->slots may change due to PLXSD */
-	ret_err = setup_pci(hc, pdev, ent);
+	if (pdev && ent)
+		/* setup pci, hc->slots may change due to PLXSD */
+		ret_err = setup_pci(hc, pdev, ent);
+	else
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+		ret_err = setup_embedded(hc, m);
+#else
+	{
+		printk(KERN_WARNING "Embedded IO Mode not selected\n");
+		ret_err = -EIO;
+	}
+#endif
 	if (ret_err) {
 		if (hc == syncmaster)
 			syncmaster = NULL;
@@ -4944,7 +5084,17 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return ret_err;
 	}
 
-	/* crate channels */
+	hc->HFC_outb_nodebug = hc->HFC_outb;
+	hc->HFC_inb_nodebug = hc->HFC_inb;
+	hc->HFC_inw_nodebug = hc->HFC_inw;
+	hc->HFC_wait_nodebug = hc->HFC_wait;
+#ifdef HFC_REGISTER_DEBUG
+	hc->HFC_outb = HFC_outb_debug;
+	hc->HFC_inb = HFC_inb_debug;
+	hc->HFC_inw = HFC_inw_debug;
+	hc->HFC_wait = HFC_wait_debug;
+#endif
+	/* create channels */
 	for (pt = 0; pt < hc->ports; pt++) {
 		if (Port_cnt >= MAX_PORTS) {
 			printk(KERN_ERR "too many ports (max=%d).\n",
@@ -4952,7 +5102,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 			ret_err = -EINVAL;
 			goto free_card;
 		}
-		if (hc->type == 1)
+		if (hc->ctype == HFC_TYPE_E1)
 			ret_err = init_e1_port(hc, m);
 		else
 			ret_err = init_multi_port(hc, pt);
@@ -5036,6 +5186,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc);
 
 	/* initialize hardware */
+	hc->irq = (m->irq) ? : hc->pci_dev->irq;
 	ret_err = init_card(hc);
 	if (ret_err) {
 		printk(KERN_ERR "init card returns %d\n", ret_err);
@@ -5074,7 +5225,7 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev)
 		spin_unlock_irqrestore(&HFClock, flags);
 	}  else {
 		if (debug)
-			printk(KERN_WARNING "%s: drvdata allready removed\n",
+			printk(KERN_DEBUG "%s: drvdata allready removed\n",
 			    __func__);
 	}
 }
@@ -5086,45 +5237,48 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev)
 #define VENDOR_PRIM	"PrimuX"
 
 static const struct hm_map hfcm_map[] = {
-/*0*/	{VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
-/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0},
-/*2*/	{VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
-/*3*/	{VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
-/*4*/	{VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
-/*5*/	{VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
-/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0},
-/*7*/	{VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
-/*8*/	{VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
-/*9*/	{VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
-/*10*/	{VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
-/*11*/	{VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
-
-/*12*/	{VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
+/*0*/	{VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0, 0},
+/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
+/*2*/	{VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
+/*3*/	{VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
+/*4*/	{VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0, 0},
+/*5*/	{VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0, 0},
+/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
+/*7*/	{VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0, 0},
+/*8*/	{VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO, 0},
+/*9*/	{VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0, 0},
+/*10*/	{VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0, 0},
+/*11*/	{VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0, 0},
+
+/*12*/	{VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0, 0},
 /*13*/	{VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
-		HFC_IO_MODE_REGIO},
-/*14*/	{VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
-/*15*/	{VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
+		HFC_IO_MODE_REGIO, 0},
+/*14*/	{VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0, 0},
+/*15*/	{VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0, 0},
 
-/*16*/	{VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
-/*17*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
-/*18*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+/*16*/	{VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0, 0},
+/*17*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0},
+/*18*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0},
 
-/*19*/	{VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
-/*20*/	{VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
-/*21*/	{VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
-/*22*/	{VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*19*/	{VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
+/*20*/	{VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0, 0},
+/*21*/	{VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
+/*22*/	{VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
 
-/*23*/	{VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
-/*24*/	{VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
-/*25*/	{VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
+/*23*/	{VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0, 0},
+/*24*/	{VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0, 0},
+/*25*/	{VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0, 0},
 
 /*26*/	{VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
-		HFC_IO_MODE_PLXSD},
+		HFC_IO_MODE_PLXSD, 0},
 /*27*/	{VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
-		HFC_IO_MODE_PLXSD},
-/*28*/	{VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
-/*29*/	{VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
-/*30*/	{VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
+		HFC_IO_MODE_PLXSD, 0},
+/*28*/	{VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0, 0},
+/*29*/	{VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0, 0},
+/*30*/	{VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0, 0},
+/*31*/	{VENDOR_CCD, "XHFC-4S Speech Design", 5, 4, 0, 0, 0, 0,
+		HFC_IO_MODE_EMBSD, XHFC_IRQ},
+/*32*/	{VENDOR_JH, "HFC-8S (junghanns)", 8, 8, 1, 0, 0, 0, 0, 0},
 };
 
 #undef H
@@ -5178,6 +5332,8 @@ static struct pci_device_id hfmultipci_ids[] __devinitdata = {
 		PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
 		PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_JH8S, 0, 0, H(32)}, /* Junganns 8S  */
 
 
 	/* Cards with HFC-E1 Chip */
@@ -5201,6 +5357,10 @@ static struct pci_device_id hfmultipci_ids[] __devinitdata = {
 		PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
 	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
 		PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
+
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_JHSE1, 0, 0, H(25)}, /* Junghanns E1 */
+
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, 0},
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
@@ -5231,7 +5391,7 @@ hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		    "Please contact the driver maintainer for support.\n");
 		return -ENODEV;
 	}
-	ret = hfcmulti_init(pdev, ent);
+	ret = hfcmulti_init(m, pdev, ent);
 	if (ret)
 		return ret;
 	HFC_cnt++;
@@ -5261,6 +5421,8 @@ static int __init
 HFCmulti_init(void)
 {
 	int err;
+	int i, xhfc = 0;
+	struct hm_map m;
 
 	printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION);
 
@@ -5308,11 +5470,43 @@ HFCmulti_init(void)
 	if (!clock)
 		clock = 1;
 
+	/* Register the embedded devices.
+	 * This should be done before the PCI cards registration */
+	switch (hwid) {
+	case HWID_MINIP4:
+		xhfc = 1;
+		m = hfcm_map[31];
+		break;
+	case HWID_MINIP8:
+		xhfc = 2;
+		m = hfcm_map[31];
+		break;
+	case HWID_MINIP16:
+		xhfc = 4;
+		m = hfcm_map[31];
+		break;
+	default:
+		xhfc = 0;
+	}
+
+	for (i = 0; i < xhfc; ++i) {
+		err = hfcmulti_init(&m, NULL, NULL);
+		if (err) {
+			printk(KERN_ERR "error registering embedded driver: "
+				"%x\n", err);
+			return -err;
+		}
+		HFC_cnt++;
+		printk(KERN_INFO "%d devices registered\n", HFC_cnt);
+	}
+
+	/* Register the PCI cards */
 	err = pci_register_driver(&hfcmultipci_driver);
 	if (err < 0) {
 		printk(KERN_ERR "error registering pci driver: %x\n", err);
 		return err;
 	}
+
 	return 0;
 }
 
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 641a9cd1a53..228ffbed128 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -257,7 +257,7 @@ reset_hfcpci(struct hfc_pci *hc)
 	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
 
 	/* Clear already pending ints */
-	if (Read_hfc(hc, HFCPCI_INT_S1));
+	val = Read_hfc(hc, HFCPCI_INT_S1);
 
 	/* set NT/TE mode */
 	hfcpci_setmode(hc);
@@ -452,7 +452,7 @@ hfcpci_empty_bfifo(struct bchannel *bch, struct bzfifo *bz,
 		}
 		bz->za[new_f2].z2 = cpu_to_le16(new_z2);
 		bz->f2 = new_f2;	/* next buffer */
-		recv_Bchannel(bch);
+		recv_Bchannel(bch, MISDN_ID_ANY);
 	}
 }
 
@@ -499,7 +499,8 @@ receive_dmsg(struct hfc_pci *hc)
 			df->f2 = ((df->f2 + 1) & MAX_D_FRAMES) |
 			    (MAX_D_FRAMES + 1);	/* next buffer */
 			df->za[df->f2 & D_FREG_MASK].z2 =
-			    cpu_to_le16((le16_to_cpu(zp->z2) + rcnt) & (D_FIFO_SIZE - 1));
+			    cpu_to_le16((le16_to_cpu(zp->z2) + rcnt) &
+			    (D_FIFO_SIZE - 1));
 		} else {
 			dch->rx_skb = mI_alloc_skb(rcnt - 3, GFP_ATOMIC);
 			if (!dch->rx_skb) {
@@ -541,35 +542,45 @@ receive_dmsg(struct hfc_pci *hc)
  * check for transparent receive data and read max one 'poll' size if avail
  */
 static void
-hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
+hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *rxbz,
+	struct bzfifo *txbz, u_char *bdata)
 {
-	 __le16 *z1r, *z2r;
-	int		new_z2, fcnt, maxlen;
-	u_char		*ptr, *ptr1;
+	 __le16	*z1r, *z2r, *z1t, *z2t;
+	int	new_z2, fcnt_rx, fcnt_tx, maxlen;
+	u_char	*ptr, *ptr1;
 
-	z1r = &bz->za[MAX_B_FRAMES].z1;		/* pointer to z reg */
+	z1r = &rxbz->za[MAX_B_FRAMES].z1;	/* pointer to z reg */
 	z2r = z1r + 1;
+	z1t = &txbz->za[MAX_B_FRAMES].z1;
+	z2t = z1t + 1;
 
-	fcnt = le16_to_cpu(*z1r) - le16_to_cpu(*z2r);
-	if (!fcnt)
+	fcnt_rx = le16_to_cpu(*z1r) - le16_to_cpu(*z2r);
+	if (!fcnt_rx)
 		return;	/* no data avail */
 
-	if (fcnt <= 0)
-		fcnt += B_FIFO_SIZE;	/* bytes actually buffered */
-	new_z2 = le16_to_cpu(*z2r) + fcnt;	/* new position in fifo */
+	if (fcnt_rx <= 0)
+		fcnt_rx += B_FIFO_SIZE;	/* bytes actually buffered */
+	new_z2 = le16_to_cpu(*z2r) + fcnt_rx;	/* new position in fifo */
 	if (new_z2 >= (B_FIFO_SIZE + B_SUB_VAL))
 		new_z2 -= B_FIFO_SIZE;	/* buffer wrap */
 
-	if (fcnt > MAX_DATA_SIZE) {	/* flush, if oversized */
+	if (fcnt_rx > MAX_DATA_SIZE) {	/* flush, if oversized */
 		*z2r = cpu_to_le16(new_z2);		/* new position */
 		return;
 	}
 
-	bch->rx_skb = mI_alloc_skb(fcnt, GFP_ATOMIC);
+	fcnt_tx = le16_to_cpu(*z2t) - le16_to_cpu(*z1t);
+	if (fcnt_tx <= 0)
+		fcnt_tx += B_FIFO_SIZE;
+		    /* fcnt_tx contains available bytes in tx-fifo */
+	fcnt_tx = B_FIFO_SIZE - fcnt_tx;
+		    /* remaining bytes to send (bytes in tx-fifo) */
+
+	bch->rx_skb = mI_alloc_skb(fcnt_rx, GFP_ATOMIC);
 	if (bch->rx_skb) {
-		ptr = skb_put(bch->rx_skb, fcnt);
-		if (le16_to_cpu(*z2r) + fcnt <= B_FIFO_SIZE + B_SUB_VAL)
-			maxlen = fcnt;	/* complete transfer */
+		ptr = skb_put(bch->rx_skb, fcnt_rx);
+		if (le16_to_cpu(*z2r) + fcnt_rx <= B_FIFO_SIZE + B_SUB_VAL)
+			maxlen = fcnt_rx;	/* complete transfer */
 		else
 			maxlen = B_FIFO_SIZE + B_SUB_VAL - le16_to_cpu(*z2r);
 			    /* maximum */
@@ -577,14 +588,14 @@ hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
 		ptr1 = bdata + (le16_to_cpu(*z2r) - B_SUB_VAL);
 		    /* start of data */
 		memcpy(ptr, ptr1, maxlen);	/* copy data */
-		fcnt -= maxlen;
+		fcnt_rx -= maxlen;
 
-		if (fcnt) {	/* rest remaining */
+		if (fcnt_rx) {	/* rest remaining */
 			ptr += maxlen;
 			ptr1 = bdata;	/* start of buffer */
-			memcpy(ptr, ptr1, fcnt);	/* rest */
+			memcpy(ptr, ptr1, fcnt_rx);	/* rest */
 		}
-		recv_Bchannel(bch);
+		recv_Bchannel(bch, fcnt_tx); /* bch, id */
 	} else
 		printk(KERN_WARNING "HFCPCI: receive out of memory\n");
 
@@ -600,26 +611,28 @@ main_rec_hfcpci(struct bchannel *bch)
 	struct hfc_pci	*hc = bch->hw;
 	int		rcnt, real_fifo;
 	int		receive = 0, count = 5;
-	struct bzfifo	*bz;
+	struct bzfifo	*txbz, *rxbz;
 	u_char		*bdata;
 	struct zt	*zp;
 
 	if ((bch->nr & 2) && (!hc->hw.bswapped)) {
-		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
+		rxbz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
+		txbz = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b2;
 		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b2;
 		real_fifo = 1;
 	} else {
-		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b1;
+		rxbz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b1;
+		txbz = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b1;
 		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b1;
 		real_fifo = 0;
 	}
 Begin:
 	count--;
-	if (bz->f1 != bz->f2) {
+	if (rxbz->f1 != rxbz->f2) {
 		if (bch->debug & DEBUG_HW_BCHANNEL)
 			printk(KERN_DEBUG "hfcpci rec ch(%x) f1(%d) f2(%d)\n",
-			    bch->nr, bz->f1, bz->f2);
-		zp = &bz->za[bz->f2];
+			    bch->nr, rxbz->f1, rxbz->f2);
+		zp = &rxbz->za[rxbz->f2];
 
 		rcnt = le16_to_cpu(zp->z1) - le16_to_cpu(zp->z2);
 		if (rcnt < 0)
@@ -630,8 +643,8 @@ Begin:
 			    "hfcpci rec ch(%x) z1(%x) z2(%x) cnt(%d)\n",
 			    bch->nr, le16_to_cpu(zp->z1),
 			    le16_to_cpu(zp->z2), rcnt);
-		hfcpci_empty_bfifo(bch, bz, bdata, rcnt);
-		rcnt = bz->f1 - bz->f2;
+		hfcpci_empty_bfifo(bch, rxbz, bdata, rcnt);
+		rcnt = rxbz->f1 - rxbz->f2;
 		if (rcnt < 0)
 			rcnt += MAX_B_FRAMES + 1;
 		if (hc->hw.last_bfifo_cnt[real_fifo] > rcnt + 1) {
@@ -644,7 +657,7 @@ Begin:
 		else
 			receive = 0;
 	} else if (test_bit(FLG_TRANSPARENT, &bch->Flags)) {
-		hfcpci_empty_fifo_trans(bch, bz, bdata);
+		hfcpci_empty_fifo_trans(bch, rxbz, txbz, bdata);
 		return;
 	} else
 		receive = 0;
@@ -954,6 +967,7 @@ static void
 ph_state_nt(struct dchannel *dch)
 {
 	struct hfc_pci	*hc = dch->hw;
+	u_char	val;
 
 	if (dch->debug)
 		printk(KERN_DEBUG "%s: NT newstate %x\n",
@@ -967,7 +981,7 @@ ph_state_nt(struct dchannel *dch)
 			hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
 			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
 			/* Clear already pending ints */
-			if (Read_hfc(hc, HFCPCI_INT_S1));
+			val = Read_hfc(hc, HFCPCI_INT_S1);
 			Write_hfc(hc, HFCPCI_STATES, 4 | HFCPCI_LOAD_STATE);
 			udelay(10);
 			Write_hfc(hc, HFCPCI_STATES, 4);
@@ -1256,8 +1270,7 @@ mode_hfcpci(struct bchannel *bch, int bc, int protocol)
 		rx_slot = (bc>>8) & 0xff;
 		tx_slot = (bc>>16) & 0xff;
 		bc = bc & 0xff;
-	} else if (test_bit(HFC_CFG_PCM, &hc->cfg) &&
-	    (protocol > ISDN_P_NONE))
+	} else if (test_bit(HFC_CFG_PCM, &hc->cfg) && (protocol > ISDN_P_NONE))
 		printk(KERN_WARNING "%s: no pcm channel id but HFC_CFG_PCM\n",
 		    __func__);
 	if (hc->chanlimit > 1) {
@@ -1315,8 +1328,8 @@ mode_hfcpci(struct bchannel *bch, int bc, int protocol)
 	case (ISDN_P_B_RAW):
 		bch->state = protocol;
 		bch->nr = bc;
-		hfcpci_clear_fifo_rx(hc, (fifo2 & 2)?1:0);
-		hfcpci_clear_fifo_tx(hc, (fifo2 & 2)?1:0);
+		hfcpci_clear_fifo_rx(hc, (fifo2 & 2) ? 1 : 0);
+		hfcpci_clear_fifo_tx(hc, (fifo2 & 2) ? 1 : 0);
 		if (bc & 2) {
 			hc->hw.sctrl |= SCTRL_B2_ENA;
 			hc->hw.sctrl_r |= SCTRL_B2_ENA;
@@ -1350,8 +1363,8 @@ mode_hfcpci(struct bchannel *bch, int bc, int protocol)
 	case (ISDN_P_B_HDLC):
 		bch->state = protocol;
 		bch->nr = bc;
-		hfcpci_clear_fifo_rx(hc, (fifo2 & 2)?1:0);
-		hfcpci_clear_fifo_tx(hc, (fifo2 & 2)?1:0);
+		hfcpci_clear_fifo_rx(hc, (fifo2 & 2) ? 1 : 0);
+		hfcpci_clear_fifo_tx(hc, (fifo2 & 2) ? 1 : 0);
 		if (bc & 2) {
 			hc->hw.sctrl |= SCTRL_B2_ENA;
 			hc->hw.sctrl_r |= SCTRL_B2_ENA;
@@ -1445,7 +1458,7 @@ set_hfcpci_rxtest(struct bchannel *bch, int protocol, int chan)
 	switch (protocol) {
 	case (ISDN_P_B_RAW):
 		bch->state = protocol;
-		hfcpci_clear_fifo_rx(hc, (chan & 2)?1:0);
+		hfcpci_clear_fifo_rx(hc, (chan & 2) ? 1 : 0);
 		if (chan & 2) {
 			hc->hw.sctrl_r |= SCTRL_B2_ENA;
 			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2RX;
@@ -1470,7 +1483,7 @@ set_hfcpci_rxtest(struct bchannel *bch, int protocol, int chan)
 		break;
 	case (ISDN_P_B_HDLC):
 		bch->state = protocol;
-		hfcpci_clear_fifo_rx(hc, (chan & 2)?1:0);
+		hfcpci_clear_fifo_rx(hc, (chan & 2) ? 1 : 0);
 		if (chan & 2) {
 			hc->hw.sctrl_r |= SCTRL_B2_ENA;
 			hc->hw.last_bfifo_cnt[1] = 0;
@@ -1793,10 +1806,9 @@ init_card(struct hfc_pci *hc)
 			printk(KERN_WARNING
 			    "HFC PCI: IRQ(%d) getting no interrupts "
 			    "during init %d\n", hc->irq, 4 - cnt);
-			if (cnt == 1) {
-				spin_unlock_irqrestore(&hc->lock, flags);
-				return -EIO;
-			} else {
+			if (cnt == 1)
+				break;
+			else {
 				reset_hfcpci(hc);
 				cnt--;
 			}
@@ -2035,7 +2047,8 @@ setup_hw(struct hfc_pci *hc)
 		printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n");
 		return 1;
 	}
-	hc->hw.pci_io = (char __iomem *)(unsigned long)hc->pdev->resource[1].start;
+	hc->hw.pci_io =
+		(char __iomem *)(unsigned long)hc->pdev->resource[1].start;
 
 	if (!hc->hw.pci_io) {
 		printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
@@ -2277,7 +2290,7 @@ hfc_remove_pci(struct pci_dev *pdev)
 		release_card(card);
 	else
 		if (debug)
-			printk(KERN_WARNING "%s: drvdata already removed\n",
+			printk(KERN_DEBUG "%s: drvdata already removed\n",
 			    __func__);
 }
 
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 9c427fb204e..6b7704c41b9 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -947,7 +947,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
 				if (fifo->dch)
 					recv_Dchannel(fifo->dch);
 				if (fifo->bch)
-					recv_Bchannel(fifo->bch);
+					recv_Bchannel(fifo->bch, MISDN_ID_ANY);
 				if (fifo->ech)
 					recv_Echannel(fifo->ech,
 						     &hw->dch);
@@ -969,7 +969,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
 	} else {
 		/* deliver transparent data to layer2 */
 		if (rx_skb->len >= poll)
-			recv_Bchannel(fifo->bch);
+			recv_Bchannel(fifo->bch, MISDN_ID_ANY);
 	}
 	spin_unlock(&hw->lock);
 }
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index f1265667b06..3d337d924c2 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -82,8 +82,9 @@ release_io_hfcpci(struct IsdnCardState *cs)
 	Write_hfc(cs, HFCPCI_INT_M2, cs->hw.hfcpci.int_m2);
 	pci_write_config_word(cs->hw.hfcpci.dev, PCI_COMMAND, 0);	/* disable memory mapped ports + busmaster */
 	del_timer(&cs->hw.hfcpci.timer);
-	kfree(cs->hw.hfcpci.share_start);
-	cs->hw.hfcpci.share_start = NULL;
+	pci_free_consistent(cs->hw.hfcpci.dev, 0x8000,
+		cs->hw.hfcpci.fifos, cs->hw.hfcpci.dma);
+	cs->hw.hfcpci.fifos = NULL;
 	iounmap((void *)cs->hw.hfcpci.pci_io);
 }
 
@@ -1663,8 +1664,19 @@ setup_hfcpci(struct IsdnCard *card)
 					     dev_hfcpci);
 		i++;
 		if (tmp_hfcpci) {
+			dma_addr_t	dma_mask = DMA_BIT_MASK(32) & ~0x7fffUL;
 			if (pci_enable_device(tmp_hfcpci))
 				continue;
+			if (pci_set_dma_mask(tmp_hfcpci, dma_mask)) {
+				printk(KERN_WARNING
+					"HiSax hfc_pci: No suitable DMA available.\n");
+				continue;
+			}
+			if (pci_set_consistent_dma_mask(tmp_hfcpci, dma_mask)) {
+				printk(KERN_WARNING
+					"HiSax hfc_pci: No suitable consistent DMA available.\n");
+				continue;
+			}
 			pci_set_master(tmp_hfcpci);
 			if ((card->para[0]) && (card->para[0] != (tmp_hfcpci->resource[ 0].start & PCI_BASE_ADDRESS_IO_MASK)))
 				continue;
@@ -1693,22 +1705,29 @@ setup_hfcpci(struct IsdnCard *card)
 		printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
 		return (0);
 	}
+
 	/* Allocate memory for FIFOS */
-	/* Because the HFC-PCI needs a 32K physical alignment, we */
-	/* need to allocate the double mem and align the address */
-	if (!(cs->hw.hfcpci.share_start = kmalloc(65536, GFP_KERNEL))) {
-		printk(KERN_WARNING "HFC-PCI: Error allocating memory for FIFO!\n");
+	cs->hw.hfcpci.fifos = pci_alloc_consistent(cs->hw.hfcpci.dev,
+					0x8000, &cs->hw.hfcpci.dma);
+	if (!cs->hw.hfcpci.fifos) {
+		printk(KERN_WARNING "HFC-PCI: Error allocating FIFO memory!\n");
+		return 0;
+	}
+	if (cs->hw.hfcpci.dma & 0x7fff) {
+		printk(KERN_WARNING
+		    "HFC-PCI: Error DMA memory not on 32K boundary (%lx)\n",
+		    (u_long)cs->hw.hfcpci.dma);
+		pci_free_consistent(cs->hw.hfcpci.dev, 0x8000,
+			cs->hw.hfcpci.fifos, cs->hw.hfcpci.dma);
 		return 0;
 	}
-	cs->hw.hfcpci.fifos = (void *)
-	    (((ulong) cs->hw.hfcpci.share_start) & ~0x7FFF) + 0x8000;
-	pci_write_config_dword(cs->hw.hfcpci.dev, 0x80, (u_int) virt_to_bus(cs->hw.hfcpci.fifos));
+	pci_write_config_dword(cs->hw.hfcpci.dev, 0x80, (u32)cs->hw.hfcpci.dma);
 	cs->hw.hfcpci.pci_io = ioremap((ulong) cs->hw.hfcpci.pci_io, 256);
 	printk(KERN_INFO
-	       "HFC-PCI: defined at mem %p fifo %p(%#x) IRQ %d HZ %d\n",
+	       "HFC-PCI: defined at mem %p fifo %p(%lx) IRQ %d HZ %d\n",
 	       cs->hw.hfcpci.pci_io,
 	       cs->hw.hfcpci.fifos,
-	       (u_int) virt_to_bus(cs->hw.hfcpci.fifos),
+	       (u_long)cs->hw.hfcpci.dma,
 	       cs->irq, HZ);
 
 	spin_lock_irqsave(&cs->lock, flags);
diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h
index f8527046f19..0685c194696 100644
--- a/drivers/isdn/hisax/hisax.h
+++ b/drivers/isdn/hisax/hisax.h
@@ -703,7 +703,7 @@ struct hfcPCI_hw {
         int nt_timer;
         struct pci_dev *dev;
         unsigned char *pci_io; /* start of PCI IO memory */
-        void *share_start; /* shared memory for Fifos start */
+	dma_addr_t dma; /* dma handle for Fifos */
         void *fifos; /* FIFO memory */ 
         int last_bfifo_cnt[2]; /* marker saving last b-fifo frame count */
 	struct timer_list timer;
diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
index 53f6ad1235d..4ffaa14b9fc 100644
--- a/drivers/isdn/hysdn/hycapi.c
+++ b/drivers/isdn/hysdn/hycapi.c
@@ -67,7 +67,7 @@ hycapi_reset_ctr(struct capi_ctr *ctrl)
 	printk(KERN_NOTICE "HYCAPI hycapi_reset_ctr\n");
 #endif
 	capilib_release(&cinfo->ncci_head);
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 }
 
 /******************************
@@ -347,7 +347,7 @@ int hycapi_capi_stop(hysdn_card *card)
 	if(cinfo) {
 		ctrl = &cinfo->capi_ctrl;
 /*		ctrl->suspend_output(ctrl); */
-		capi_ctr_reseted(ctrl);
+		capi_ctr_down(ctrl);
 	}
 	return 0;
 }
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
index 36778b270c3..ed3510f273d 100644
--- a/drivers/isdn/i4l/Kconfig
+++ b/drivers/isdn/i4l/Kconfig
@@ -135,5 +135,3 @@ source "drivers/isdn/act2000/Kconfig"
 source "drivers/isdn/hysdn/Kconfig"
 
 endmenu
-
-source "drivers/isdn/gigaset/Kconfig"
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index cb8943da4f1..34d54e7281f 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1069,7 +1069,7 @@ isdn_net_xmit(struct net_device *ndev, struct sk_buff *skb)
 	lp = isdn_net_get_locked_lp(nd);
 	if (!lp) {
 		printk(KERN_WARNING "%s: all channels busy - requeuing!\n", ndev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	/* we have our lp locked from now on */
 
@@ -1273,14 +1273,14 @@ isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 					spin_unlock_irqrestore(&dev->lock, flags);
 					isdn_net_dial();	/* Initiate dialing */
 					netif_stop_queue(ndev);
-					return 1;	/* let upper layer requeue skb packet */
+					return NETDEV_TX_BUSY;	/* let upper layer requeue skb packet */
 				}
 #endif
 				/* Initiate dialing */
 				spin_unlock_irqrestore(&dev->lock, flags);
 				isdn_net_dial();
 				isdn_net_device_stop_queue(lp);
-				return 1;
+				return NETDEV_TX_BUSY;
 			} else {
 				isdn_net_unreachable(ndev, skb,
 						     "No phone number");
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 1a2222cbb80..b4d4522e507 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1592,7 +1592,7 @@ isdn_tty_open(struct tty_struct *tty, struct file *filp)
 	int retval, line;
 
 	line = tty->index;
-	if (line < 0 || line > ISDN_MAX_CHANNELS)
+	if (line < 0 || line >= ISDN_MAX_CHANNELS)
 		return -ENODEV;
 	info = &dev->mdm.info[line];
 	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c
index 9426c9827e4..21d34be5af6 100644
--- a/drivers/isdn/mISDN/core.c
+++ b/drivers/isdn/mISDN/core.c
@@ -214,7 +214,7 @@ get_free_devid(void)
 		if (!test_and_set_bit(i, (u_long *)&device_ids))
 			break;
 	if (i > MAX_DEVICE_ID)
-		return -1;
+		return -EBUSY;
 	return i;
 }
 
@@ -224,10 +224,10 @@ mISDN_register_device(struct mISDNdevice *dev,
 {
 	int	err;
 
-	dev->id = get_free_devid();
-	err = -EBUSY;
-	if (dev->id < 0)
+	err = get_free_devid();
+	if (err < 0)
 		goto error1;
+	dev->id = err;
 
 	device_initialize(&dev->dev);
 	if (name && name[0])
diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h
index 98a33c58f09..18af86879c0 100644
--- a/drivers/isdn/mISDN/dsp.h
+++ b/drivers/isdn/mISDN/dsp.h
@@ -112,9 +112,11 @@ struct dsp_conf {
 
 #define DSP_DTMF_NPOINTS 102
 
-#define ECHOCAN_BUFLEN (4*128)
+#define ECHOCAN_BUFF_SIZE 0x400 /* must be 2**n */
+#define ECHOCAN_BUFF_MASK 0x3ff /* -1 */
 
 struct dsp_dtmf {
+	int		enable; /* dtmf is enabled */
 	int		treshold; /* above this is dtmf (square of) */
 	int		software; /* dtmf uses software decoding */
 	int		hardware; /* dtmf uses hardware decoding */
@@ -123,7 +125,7 @@ struct dsp_dtmf {
 		/* buffers one full dtmf frame */
 	u8		lastwhat, lastdigit;
 	int		count;
-	u8		digits[16]; /* just the dtmf result */
+	u8		digits[16]; /* dtmf result */
 };
 
 
@@ -150,6 +152,15 @@ struct dsp_tone {
 	struct timer_list tl;
 };
 
+/***************
+ * echo stuff *
+ ***************/
+
+struct dsp_echo {
+	int		software; /* echo is generated by software */
+	int		hardware; /* echo is generated by hardware */
+};
+
 /*****************
  * general stuff *
  *****************/
@@ -160,7 +171,7 @@ struct dsp {
 	struct mISDNchannel	*up;
 	unsigned char	name[64];
 	int		b_active;
-	int		echo; /* echo is enabled */
+	struct dsp_echo	echo;
 	int		rx_disabled; /* what the user wants */
 	int		rx_is_off; /* what the card is */
 	int		tx_mix;
@@ -261,5 +272,5 @@ extern int  dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg);
 extern void dsp_pipeline_process_tx(struct dsp_pipeline *pipeline, u8 *data,
 		int len);
 extern void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data,
-		int len);
+		int len, unsigned int txlen);
 
diff --git a/drivers/isdn/mISDN/dsp_audio.c b/drivers/isdn/mISDN/dsp_audio.c
index de3795e3f43..9c7c6451bf3 100644
--- a/drivers/isdn/mISDN/dsp_audio.c
+++ b/drivers/isdn/mISDN/dsp_audio.c
@@ -210,9 +210,8 @@ dsp_audio_generate_seven(void)
 		j = 0;
 		for (k = 0; k < 256; k++) {
 			if (dsp_audio_alaw_to_s32[k]
-				< dsp_audio_alaw_to_s32[i]) {
-			j++;
-			}
+			    < dsp_audio_alaw_to_s32[i])
+				j++;
 		}
 		sorted_alaw[j] = i;
 	}
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index 58c43e429f7..9c7c0d1ba55 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -163,8 +163,9 @@ dsp_cmx_debug(struct dsp *dsp)
 
 	printk(KERN_DEBUG "-----Current DSP\n");
 	list_for_each_entry(odsp, &dsp_ilist, list) {
-		printk(KERN_DEBUG "* %s echo=%d txmix=%d",
-		    odsp->name, odsp->echo, odsp->tx_mix);
+		printk(KERN_DEBUG "* %s hardecho=%d softecho=%d txmix=%d",
+		    odsp->name, odsp->echo.hardware, odsp->echo.software,
+		    odsp->tx_mix);
 		if (odsp->conf)
 			printk(" (Conf %d)", odsp->conf->id);
 		if (dsp == odsp)
@@ -177,10 +178,12 @@ dsp_cmx_debug(struct dsp *dsp)
 		list_for_each_entry(member, &conf->mlist, list) {
 			printk(KERN_DEBUG
 			    "  - member = %s (slot_tx %d, bank_tx %d, "
-			    "slot_rx %d, bank_rx %d hfc_conf %d)%s\n",
+			    "slot_rx %d, bank_rx %d hfc_conf %d "
+			    "tx_data %d rx_is_off %d)%s\n",
 			    member->dsp->name, member->dsp->pcm_slot_tx,
 			    member->dsp->pcm_bank_tx, member->dsp->pcm_slot_rx,
 			    member->dsp->pcm_bank_rx, member->dsp->hfc_conf,
+			    member->dsp->tx_data, member->dsp->rx_is_off,
 			    (member->dsp == dsp) ? " *this*" : "");
 		}
 	}
@@ -235,7 +238,7 @@ dsp_cmx_add_conf_member(struct dsp *dsp, struct dsp_conf *conf)
 
 	member = kzalloc(sizeof(struct dsp_conf_member), GFP_ATOMIC);
 	if (!member) {
-		printk(KERN_ERR "kmalloc struct dsp_conf_member failed\n");
+		printk(KERN_ERR "kzalloc struct dsp_conf_member failed\n");
 		return -ENOMEM;
 	}
 	member->dsp = dsp;
@@ -314,7 +317,7 @@ static struct dsp_conf
 
 	conf = kzalloc(sizeof(struct dsp_conf), GFP_ATOMIC);
 	if (!conf) {
-		printk(KERN_ERR "kmalloc struct dsp_conf failed\n");
+		printk(KERN_ERR "kzalloc struct dsp_conf failed\n");
 		return NULL;
 	}
 	INIT_LIST_HEAD(&conf->mlist);
@@ -385,7 +388,7 @@ dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp)
 	int		freeunits[8];
 	u_char		freeslots[256];
 	int		same_hfc = -1, same_pcm = -1, current_conf = -1,
-	    all_conf = 1;
+	    all_conf = 1, tx_data = 0;
 
 	/* dsp gets updated (no conf) */
 	if (!conf) {
@@ -409,7 +412,7 @@ one_member:
 		/* process hw echo */
 		if (dsp->features.pcm_banks < 1)
 			return;
-		if (!dsp->echo) {
+		if (!dsp->echo.software && !dsp->echo.hardware) {
 			/* NO ECHO: remove PCM slot if assigned */
 			if (dsp->pcm_slot_tx >= 0 || dsp->pcm_slot_rx >= 0) {
 				if (dsp_debug & DEBUG_DSP_CMX)
@@ -427,10 +430,15 @@ one_member:
 			}
 			return;
 		}
+		/* echo is enabled, find out if we use soft or hardware */
+		dsp->echo.software = dsp->tx_data;
+		dsp->echo.hardware = 0;
 		/* ECHO: already echo */
 		if (dsp->pcm_slot_tx >= 0 && dsp->pcm_slot_rx < 0 &&
-		    dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2)
+		    dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2) {
+			dsp->echo.hardware = 1;
 			return;
+		}
 		/* ECHO: if slot already assigned */
 		if (dsp->pcm_slot_tx >= 0) {
 			dsp->pcm_slot_rx = dsp->pcm_slot_tx;
@@ -443,6 +451,7 @@ one_member:
 				    dsp->pcm_slot_tx);
 			dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
 			    dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
+			dsp->echo.hardware = 1;
 			return;
 		}
 		/* ECHO: find slot */
@@ -472,6 +481,7 @@ one_member:
 				    "%s no slot available for echo\n",
 				    __func__);
 			/* no more slots available */
+			dsp->echo.software = 1;
 			return;
 		}
 		/* assign free slot */
@@ -485,6 +495,7 @@ one_member:
 			    __func__, dsp->name, dsp->pcm_slot_tx);
 		dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
 		    dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
+		dsp->echo.hardware = 1;
 		return;
 	}
 
@@ -554,7 +565,7 @@ conf_software:
 			return;
 		}
 		/* check if member has echo turned on */
-		if (member->dsp->echo) {
+		if (member->dsp->echo.hardware || member->dsp->echo.software) {
 			if (dsp_debug & DEBUG_DSP_CMX)
 				printk(KERN_DEBUG
 				    "%s dsp %s cannot form a conf, because "
@@ -592,10 +603,9 @@ conf_software:
 		if (member->dsp->tx_data) {
 			if (dsp_debug & DEBUG_DSP_CMX)
 				printk(KERN_DEBUG
-				    "%s dsp %s cannot form a conf, because "
-				    "tx_data is turned on\n",
+				    "%s dsp %s tx_data is turned on\n",
 				    __func__, member->dsp->name);
-			goto conf_software;
+			tx_data = 1;
 		}
 		/* check if pipeline exists */
 		if (member->dsp->pipeline.inuse) {
@@ -794,7 +804,7 @@ conf_software:
 			    nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
 			    nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
 			conf->hardware = 1;
-			conf->software = 0;
+			conf->software = tx_data;
 			return;
 		/* if members have one bank (or on the same chip) */
 		} else {
@@ -904,7 +914,7 @@ conf_software:
 			    nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
 			    nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
 			conf->hardware = 1;
-			conf->software = 0;
+			conf->software = tx_data;
 			return;
 		}
 	}
@@ -937,6 +947,10 @@ conf_software:
 	if (current_conf >= 0) {
 join_members:
 		list_for_each_entry(member, &conf->mlist, list) {
+			/* if no conference engine on our chip, change to
+			 * software */
+			if (!member->dsp->features.hfc_conf)
+				goto conf_software;
 			/* in case of hdlc, change to software */
 			if (member->dsp->hdlc)
 				goto conf_software;
@@ -1295,17 +1309,25 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 	int r, rr, t, tt, o_r, o_rr;
 	int preload = 0;
 	struct mISDNhead *hh, *thh;
+	int tx_data_only = 0;
 
 	/* don't process if: */
 	if (!dsp->b_active) { /* if not active */
 		dsp->last_tx = 0;
 		return;
 	}
-	if (dsp->pcm_slot_tx >= 0 && /* connected to pcm slot */
+	if (((dsp->conf && dsp->conf->hardware) || /* hardware conf */
+	    dsp->echo.hardware) && /* OR hardware echo */
 	    dsp->tx_R == dsp->tx_W && /* AND no tx-data */
 	    !(dsp->tone.tone && dsp->tone.software)) { /* AND not soft tones */
-		dsp->last_tx = 0;
-		return;
+		if (!dsp->tx_data) { /* no tx_data for user space required */
+			dsp->last_tx = 0;
+			return;
+		}
+		if (dsp->conf && dsp->conf->software && dsp->conf->hardware)
+			tx_data_only = 1;
+		if (dsp->conf->software && dsp->echo.hardware)
+			tx_data_only = 1;
 	}
 
 #ifdef CMX_DEBUG
@@ -1367,7 +1389,8 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 		while (r != rr && t != tt) {
 #ifdef CMX_TX_DEBUG
 			if (strlen(debugbuf) < 48)
-			    sprintf(debugbuf+strlen(debugbuf), " %02x", p[t]);
+				sprintf(debugbuf+strlen(debugbuf), " %02x",
+				    p[t]);
 #endif
 			*d++ = p[t]; /* write tx_buff */
 			t = (t+1) & CMX_BUFF_MASK;
@@ -1388,7 +1411,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 	/* PROCESS DATA (one member / no conf) */
 	if (!conf || members <= 1) {
 		/* -> if echo is NOT enabled */
-		if (!dsp->echo) {
+		if (!dsp->echo.software) {
 			/* -> send tx-data if available or use 0-volume */
 			while (r != rr && t != tt) {
 				*d++ = p[t]; /* write tx_buff */
@@ -1438,7 +1461,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 		o_r = (o_rr - rr + r) & CMX_BUFF_MASK;
 			/* start rx-pointer at current read position*/
 		/* -> if echo is NOT enabled */
-		if (!dsp->echo) {
+		if (!dsp->echo.software) {
 			/*
 			 * -> copy other member's rx-data,
 			 * if tx-data is available, mix
@@ -1486,7 +1509,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 #endif
 	/* PROCESS DATA (three or more members) */
 	/* -> if echo is NOT enabled */
-	if (!dsp->echo) {
+	if (!dsp->echo.software) {
 		/*
 		 * -> substract rx-data from conf-data,
 		 * if tx-data is available, mix
@@ -1550,27 +1573,40 @@ send_packet:
 	 * becuase we want what we send, not what we filtered
 	 */
 	if (dsp->tx_data) {
-		/* PREPARE RESULT */
-		txskb = mI_alloc_skb(len, GFP_ATOMIC);
-		if (!txskb) {
-			printk(KERN_ERR
-			    "FATAL ERROR in mISDN_dsp.o: "
-			    "cannot alloc %d bytes\n", len);
+		if (tx_data_only) {
+			hh->prim = DL_DATA_REQ;
+			hh->id = 0;
+			/* queue and trigger */
+			skb_queue_tail(&dsp->sendq, nskb);
+			schedule_work(&dsp->workq);
+			/* exit because only tx_data is used */
+			return;
 		} else {
-			thh = mISDN_HEAD_P(txskb);
-			thh->prim = DL_DATA_REQ;
-			thh->id = 0;
-			memcpy(skb_put(txskb, len), nskb->data+preload, len);
-			/* queue (trigger later) */
-			skb_queue_tail(&dsp->sendq, txskb);
+			txskb = mI_alloc_skb(len, GFP_ATOMIC);
+			if (!txskb) {
+				printk(KERN_ERR
+				    "FATAL ERROR in mISDN_dsp.o: "
+				    "cannot alloc %d bytes\n", len);
+			} else {
+				thh = mISDN_HEAD_P(txskb);
+				thh->prim = DL_DATA_REQ;
+				thh->id = 0;
+				memcpy(skb_put(txskb, len), nskb->data+preload,
+					len);
+				/* queue (trigger later) */
+				skb_queue_tail(&dsp->sendq, txskb);
+			}
 		}
 	}
+
+	/* send data only to card, if we don't just calculated tx_data */
 	/* adjust volume */
 	if (dsp->tx_volume)
 		dsp_change_volume(nskb, dsp->tx_volume);
 	/* pipeline */
 	if (dsp->pipeline.inuse)
-		dsp_pipeline_process_tx(&dsp->pipeline, nskb->data, nskb->len);
+		dsp_pipeline_process_tx(&dsp->pipeline, nskb->data,
+			nskb->len);
 	/* crypt */
 	if (dsp->bf_enable)
 		dsp_bf_encrypt(dsp, nskb->data, nskb->len);
@@ -1592,7 +1628,8 @@ dsp_cmx_send(void *arg)
 	struct dsp_conf_member *member;
 	struct dsp *dsp;
 	int mustmix, members;
-	s32 mixbuffer[MAX_POLL+100], *c;
+	static s32 mixbuffer[MAX_POLL+100];
+	s32 *c;
 	u8 *p, *q;
 	int r, rr;
 	int jittercheck = 0, delay, i;
@@ -1890,10 +1927,8 @@ dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
 
 	/* no conf */
 	if (!dsp->conf) {
-		/* in case of hardware (echo) */
-		if (dsp->pcm_slot_tx >= 0)
-			return;
-		if (dsp->echo) {
+		/* in case of software echo */
+		if (dsp->echo.software) {
 			nskb = skb_clone(skb, GFP_ATOMIC);
 			if (nskb) {
 				hh = mISDN_HEAD_P(nskb);
@@ -1909,7 +1944,7 @@ dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
 	if (dsp->conf->hardware)
 		return;
 	list_for_each_entry(member, &dsp->conf->mlist, list) {
-		if (dsp->echo || member->dsp != dsp) {
+		if (dsp->echo.software || member->dsp != dsp) {
 			nskb = skb_clone(skb, GFP_ATOMIC);
 			if (nskb) {
 				hh = mISDN_HEAD_P(nskb);
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 3083338716b..77ee2867c8b 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -203,13 +203,13 @@ dsp_rx_off_member(struct dsp *dsp)
 	else if (dsp->dtmf.software)
 		rx_off = 0;
 	/* echo in software */
-	else if (dsp->echo && dsp->pcm_slot_tx < 0)
+	else if (dsp->echo.software)
 		rx_off = 0;
 	/* bridge in software */
-	else if (dsp->conf) {
-		if (dsp->conf->software)
-			rx_off = 0;
-	}
+	else if (dsp->conf && dsp->conf->software)
+		rx_off = 0;
+	/* data is not required by user space and not required
+	 * for echo dtmf detection, soft-echo, soft-bridging */
 
 	if (rx_off == dsp->rx_is_off)
 		return;
@@ -280,7 +280,7 @@ dsp_fill_empty(struct dsp *dsp)
 static int
 dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb)
 {
-	struct		sk_buff *nskb;
+	struct sk_buff	*nskb;
 	int ret = 0;
 	int cont;
 	u8 *data;
@@ -306,15 +306,18 @@ dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb)
 					"to %d\n", *((int *)data));
 			dsp->dtmf.treshold = (*(int *)data) * 10000;
 		}
+		dsp->dtmf.enable = 1;
 		/* init goertzel */
 		dsp_dtmf_goertzel_init(dsp);
 
 		/* check dtmf hardware */
 		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
 		break;
 	case DTMF_TONE_STOP: /* turn off DTMF */
 		if (dsp_debug & DEBUG_DSP_CORE)
 			printk(KERN_DEBUG "%s: stop dtmf\n", __func__);
+		dsp->dtmf.enable = 0;
 		dsp->dtmf.hardware = 0;
 		dsp->dtmf.software = 0;
 		break;
@@ -414,7 +417,7 @@ tone_off:
 		dsp_rx_off(dsp);
 		break;
 	case DSP_ECHO_ON: /* enable echo */
-		dsp->echo = 1; /* soft echo */
+		dsp->echo.software = 1; /* soft echo */
 		if (dsp_debug & DEBUG_DSP_CORE)
 			printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__);
 		dsp_cmx_hardware(dsp->conf, dsp);
@@ -423,7 +426,8 @@ tone_off:
 			dsp_cmx_debug(dsp);
 		break;
 	case DSP_ECHO_OFF: /* disable echo */
-		dsp->echo = 0;
+		dsp->echo.software = 0;
+		dsp->echo.hardware = 0;
 		if (dsp_debug & DEBUG_DSP_CORE)
 			printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__);
 		dsp_cmx_hardware(dsp->conf, dsp);
@@ -502,7 +506,7 @@ tone_off:
 			break;
 		}
 		dsp->cmx_delay = (*((int *)data)) << 3;
-			/* miliseconds to samples */
+			/* milliseconds to samples */
 		if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1))
 			/* clip to half of maximum usable buffer
 			(half of half buffer) */
@@ -556,7 +560,7 @@ tone_off:
 			dsp->pipeline.inuse = 1;
 			dsp_cmx_hardware(dsp->conf, dsp);
 			ret = dsp_pipeline_build(&dsp->pipeline,
-				len > 0 ? (char *)data : NULL);
+				len > 0 ? data : NULL);
 			dsp_cmx_hardware(dsp->conf, dsp);
 			dsp_rx_off(dsp);
 		}
@@ -657,11 +661,10 @@ get_features(struct mISDNchannel *ch)
 static int
 dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
 {
-	struct dsp			*dsp = container_of(ch, struct dsp, ch);
+	struct dsp		*dsp = container_of(ch, struct dsp, ch);
 	struct mISDNhead	*hh;
 	int			ret = 0;
-	u8			*digits;
-	int			cont;
+	u8			*digits = NULL;
 	u_long			flags;
 
 	hh = mISDN_HEAD_P(skb);
@@ -704,50 +707,55 @@ dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
 			break;
 		}
 
+		spin_lock_irqsave(&dsp_lock, flags);
+
 		/* decrypt if enabled */
 		if (dsp->bf_enable)
 			dsp_bf_decrypt(dsp, skb->data, skb->len);
 		/* pipeline */
 		if (dsp->pipeline.inuse)
 			dsp_pipeline_process_rx(&dsp->pipeline, skb->data,
-				skb->len);
+				skb->len, hh->id);
 		/* change volume if requested */
 		if (dsp->rx_volume)
 			dsp_change_volume(skb, dsp->rx_volume);
-
 		/* check if dtmf soft decoding is turned on */
 		if (dsp->dtmf.software) {
 			digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
-				skb->len, (dsp_options&DSP_OPT_ULAW)?1:0);
+				skb->len, (dsp_options&DSP_OPT_ULAW) ? 1 : 0);
+		}
+		/* we need to process receive data if software */
+		if (dsp->conf && dsp->conf->software) {
+			/* process data from card at cmx */
+			dsp_cmx_receive(dsp, skb);
+		}
+
+		spin_unlock_irqrestore(&dsp_lock, flags);
+
+		/* send dtmf result, if any */
+		if (digits) {
 			while (*digits) {
+				int k;
 				struct sk_buff *nskb;
 				if (dsp_debug & DEBUG_DSP_DTMF)
 					printk(KERN_DEBUG "%s: digit"
 					    "(%c) to layer %s\n",
 					    __func__, *digits, dsp->name);
-				cont = DTMF_TONE_VAL | *digits;
+				k = *digits | DTMF_TONE_VAL;
 				nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
-				    MISDN_ID_ANY, sizeof(int), &cont,
-				    GFP_ATOMIC);
+					MISDN_ID_ANY, sizeof(int), &k,
+					GFP_ATOMIC);
 				if (nskb) {
 					if (dsp->up) {
 						if (dsp->up->send(
 						    dsp->up, nskb))
-						dev_kfree_skb(nskb);
+							dev_kfree_skb(nskb);
 					} else
 						dev_kfree_skb(nskb);
 				}
 				digits++;
 			}
 		}
-		/* we need to process receive data if software */
-		spin_lock_irqsave(&dsp_lock, flags);
-		if (dsp->pcm_slot_tx < 0 && dsp->pcm_slot_rx < 0) {
-			/* process data from card at cmx */
-			dsp_cmx_receive(dsp, skb);
-		}
-		spin_unlock_irqrestore(&dsp_lock, flags);
-
 		if (dsp->rx_disabled) {
 			/* if receive is not allowed */
 			break;
@@ -787,7 +795,7 @@ dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
 					if (dsp->up) {
 						if (dsp->up->send(
 						    dsp->up, nskb))
-						dev_kfree_skb(nskb);
+							dev_kfree_skb(nskb);
 					} else
 						dev_kfree_skb(nskb);
 				}
@@ -946,7 +954,7 @@ dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 	int		err = 0;
 
 	if (debug & DEBUG_DSP_CTRL)
-	printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
+		printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
 
 	switch (cmd) {
 	case OPEN_CHANNEL:
@@ -1169,9 +1177,9 @@ static int dsp_init(void)
 
 	/* init conversion tables */
 	dsp_audio_generate_law_tables();
-	dsp_silence = (dsp_options&DSP_OPT_ULAW)?0xff:0x2a;
-	dsp_audio_law_to_s32 = (dsp_options&DSP_OPT_ULAW)?dsp_audio_ulaw_to_s32:
-		dsp_audio_alaw_to_s32;
+	dsp_silence = (dsp_options&DSP_OPT_ULAW) ? 0xff : 0x2a;
+	dsp_audio_law_to_s32 = (dsp_options&DSP_OPT_ULAW) ?
+		dsp_audio_ulaw_to_s32 : dsp_audio_alaw_to_s32;
 	dsp_audio_generate_s2law_table();
 	dsp_audio_generate_seven();
 	dsp_audio_generate_mix_table();
diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c
index efc371c1f0d..9ae2d33b06f 100644
--- a/drivers/isdn/mISDN/dsp_dtmf.c
+++ b/drivers/isdn/mISDN/dsp_dtmf.c
@@ -51,6 +51,9 @@ void dsp_dtmf_hardware(struct dsp *dsp)
 {
 	int hardware = 1;
 
+	if (!dsp->dtmf.enable)
+		return;
+
 	if (!dsp->features.hfc_dtmf)
 		hardware = 0;
 
diff --git a/drivers/isdn/mISDN/dsp_ecdis.h b/drivers/isdn/mISDN/dsp_ecdis.h
index 8a20af43308..21dbd153ee2 100644
--- a/drivers/isdn/mISDN/dsp_ecdis.h
+++ b/drivers/isdn/mISDN/dsp_ecdis.h
@@ -91,7 +91,7 @@ int16_t amp)
 					&& det->tone_cycle_duration <= 475*8) {
 					det->good_cycles++;
 					if (det->good_cycles > 2)
-					det->hit = TRUE;
+						det->hit = TRUE;
 				}
 				det->tone_cycle_duration = 0;
 			}
diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
index 18cf87c113e..e9941678edf 100644
--- a/drivers/isdn/mISDN/dsp_pipeline.c
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -55,20 +55,19 @@ static ssize_t
 attr_show_args(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct mISDN_dsp_element *elem = dev_get_drvdata(dev);
-	ssize_t len = 0;
-	int i = 0;
+	int i;
+	char *p = buf;
 
 	*buf = 0;
-	for (; i < elem->num_args; ++i)
-		len = sprintf(buf, "%sName:        %s\n%s%s%sDescription: %s\n"
-			"\n", buf,
+	for (i = 0; i < elem->num_args; i++)
+		p += sprintf(p, "Name:        %s\n%s%s%sDescription: %s\n\n",
 			  elem->args[i].name,
 			  elem->args[i].def ? "Default:     " : "",
 			  elem->args[i].def ? elem->args[i].def : "",
 			  elem->args[i].def ? "\n" : "",
 			  elem->args[i].desc);
 
-	return len;
+	return p - buf;
 }
 
 static struct device_attribute element_attributes[] = {
@@ -347,7 +346,8 @@ void dsp_pipeline_process_tx(struct dsp_pipeline *pipeline, u8 *data, int len)
 			entry->elem->process_tx(entry->p, data, len);
 }
 
-void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data, int len)
+void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data, int len,
+	unsigned int txlen)
 {
 	struct dsp_pipeline_entry *entry;
 
@@ -356,7 +356,7 @@ void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data, int len)
 
 	list_for_each_entry_reverse(entry, &pipeline->list, list)
 		if (entry->elem->process_rx)
-			entry->elem->process_rx(entry->p, data, len);
+			entry->elem->process_rx(entry->p, data, len, txlen);
 }
 
 
diff --git a/drivers/isdn/mISDN/dsp_tones.c b/drivers/isdn/mISDN/dsp_tones.c
index 7a9af66f4b1..1debf53670d 100644
--- a/drivers/isdn/mISDN/dsp_tones.c
+++ b/drivers/isdn/mISDN/dsp_tones.c
@@ -253,18 +253,24 @@ static struct pattern {
 	{8000, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
 
 	{TONE_GERMAN_DIALPBX,
-	{DATA_GA, DATA_S, DATA_GA, DATA_S, DATA_GA, DATA_S, NULL, NULL, NULL, NULL},
-	{SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, NULL, NULL, NULL, NULL},
+	{DATA_GA, DATA_S, DATA_GA, DATA_S, DATA_GA, DATA_S, NULL, NULL, NULL,
+		NULL},
+	{SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, NULL, NULL, NULL,
+		NULL},
 	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
 
 	{TONE_GERMAN_OLDDIALPBX,
-	{DATA_GO, DATA_S, DATA_GO, DATA_S, DATA_GO, DATA_S, NULL, NULL, NULL, NULL},
-	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, NULL, NULL, NULL, NULL},
+	{DATA_GO, DATA_S, DATA_GO, DATA_S, DATA_GO, DATA_S, NULL, NULL, NULL,
+		NULL},
+	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, NULL, NULL, NULL,
+		NULL},
 	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
 
 	{TONE_AMERICAN_DIALPBX,
-	{DATA_DT, DATA_S, DATA_DT, DATA_S, DATA_DT, DATA_S, NULL, NULL, NULL, NULL},
-	{SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, NULL, NULL, NULL, NULL},
+	{DATA_DT, DATA_S, DATA_DT, DATA_S, DATA_DT, DATA_S, NULL, NULL, NULL,
+		NULL},
+	{SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, NULL, NULL, NULL,
+		NULL},
 	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
 
 	{TONE_GERMAN_RINGING,
@@ -434,7 +440,7 @@ dsp_tone_hw_message(struct dsp *dsp, u8 *sample, int len)
 
 	/* unlocking is not required, because we don't expect a response */
 	nskb = _alloc_mISDN_skb(PH_CONTROL_REQ,
-		(len)?HFC_SPL_LOOP_ON:HFC_SPL_LOOP_OFF, len, sample,
+		(len) ? HFC_SPL_LOOP_ON : HFC_SPL_LOOP_OFF, len, sample,
 		GFP_ATOMIC);
 	if (nskb) {
 		if (dsp->ch.peer) {
@@ -498,8 +504,7 @@ dsp_tone(struct dsp *dsp, int tone)
 
 	/* we turn off the tone */
 	if (!tone) {
-		if (dsp->features.hfc_loops)
-		if (timer_pending(&tonet->tl))
+		if (dsp->features.hfc_loops && timer_pending(&tonet->tl))
 			del_timer(&tonet->tl);
 		if (dsp->features.hfc_loops)
 			dsp_tone_hw_message(dsp, NULL, 0);
diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c
index ab1168a110a..0481a0cdf6d 100644
--- a/drivers/isdn/mISDN/hwchannel.c
+++ b/drivers/isdn/mISDN/hwchannel.c
@@ -185,13 +185,13 @@ recv_Echannel(struct dchannel *ech, struct dchannel *dch)
 EXPORT_SYMBOL(recv_Echannel);
 
 void
-recv_Bchannel(struct bchannel *bch)
+recv_Bchannel(struct bchannel *bch, unsigned int id)
 {
 	struct mISDNhead *hh;
 
 	hh = mISDN_HEAD_P(bch->rx_skb);
 	hh->prim = PH_DATA_IND;
-	hh->id = MISDN_ID_ANY;
+	hh->id = id;
 	if (bch->rcount >= 64) {
 		printk(KERN_WARNING "B-channel %p receive queue overflow, "
 			"fushing!\n", bch);
diff --git a/drivers/isdn/mISDN/l1oip.h b/drivers/isdn/mISDN/l1oip.h
index a23d575449f..bc26c890d9a 100644
--- a/drivers/isdn/mISDN/l1oip.h
+++ b/drivers/isdn/mISDN/l1oip.h
@@ -76,7 +76,7 @@ struct l1oip {
 	struct sockaddr_in	sin_local;	/* local socket name */
 	struct sockaddr_in	sin_remote;	/* remote socket name */
 	struct msghdr		sendmsg;	/* ip message to send */
-	struct iovec		sendiov;	/* iov for message */
+	struct kvec		sendiov;	/* iov for message */
 
 	/* frame */
 	struct l1oip_chan	chan[128];	/* channel instances */
diff --git a/drivers/isdn/mISDN/l1oip_codec.c b/drivers/isdn/mISDN/l1oip_codec.c
index e4ecba3d48d..bbfd1b863ed 100644
--- a/drivers/isdn/mISDN/l1oip_codec.c
+++ b/drivers/isdn/mISDN/l1oip_codec.c
@@ -48,6 +48,7 @@ NOTE: The bytes are handled as they are law-encoded.
 
 #include <linux/vmalloc.h>
 #include <linux/mISDNif.h>
+#include <linux/in.h>
 #include "core.h"
 #include "l1oip.h"
 
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index abe57498957..990e6a7e667 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -279,7 +279,6 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 	int multi = 0;
 	u8 frame[len+32];
 	struct socket *socket = NULL;
-	mm_segment_t oldfs;
 
 	if (debug & DEBUG_L1OIP_MSG)
 		printk(KERN_DEBUG "%s: sending data to socket (len = %d)\n",
@@ -308,8 +307,8 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 
 	/* assemble frame */
 	*p++ = (L1OIP_VERSION<<6) /* version and coding */
-	     | (hc->pri?0x20:0x00) /* type */
-	     | (hc->id?0x10:0x00) /* id */
+	     | (hc->pri ? 0x20 : 0x00) /* type */
+	     | (hc->id ? 0x10 : 0x00) /* id */
 	     | localcodec;
 	if (hc->id) {
 		*p++ = hc->id>>24; /* id */
@@ -317,7 +316,7 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 		*p++ = hc->id>>8;
 		*p++ = hc->id;
 	}
-	*p++ = (multi == 1)?0x80:0x00 + channel; /* m-flag, channel */
+	*p++ = (multi == 1) ? 0x80 : 0x00 + channel; /* m-flag, channel */
 	if (multi == 1)
 		*p++ = len; /* length */
 	*p++ = timebase>>8; /* time base */
@@ -352,10 +351,7 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 			"= %d)\n", __func__, len);
 	hc->sendiov.iov_base = frame;
 	hc->sendiov.iov_len  = len;
-	oldfs = get_fs();
-	set_fs(KERNEL_DS);
-	len = sock_sendmsg(socket, &hc->sendmsg, len);
-	set_fs(oldfs);
+	len = kernel_sendmsg(socket, &hc->sendmsg, &hc->sendiov, 1, len);
 	/* give socket back */
 	hc->socket = socket; /* no locking required */
 
@@ -401,12 +397,12 @@ l1oip_socket_recv(struct l1oip *hc, u8 remotecodec, u8 channel, u16 timebase,
 	}
 
 	/* prepare message */
-	nskb = mI_alloc_skb((remotecodec == 3)?(len<<1):len, GFP_ATOMIC);
+	nskb = mI_alloc_skb((remotecodec == 3) ? (len<<1) : len, GFP_ATOMIC);
 	if (!nskb) {
 		printk(KERN_ERR "%s: No mem for skb.\n", __func__);
 		return;
 	}
-	p = skb_put(nskb, (remotecodec == 3)?(len<<1):len);
+	p = skb_put(nskb, (remotecodec == 3) ? (len<<1) : len);
 
 	if (remotecodec == 1 && ulaw)
 		l1oip_alaw_to_ulaw(buf, len, p);
@@ -458,7 +454,7 @@ l1oip_socket_recv(struct l1oip *hc, u8 remotecodec, u8 channel, u16 timebase,
 		hc->chan[channel].disorder_flag ^= 1;
 		if (nskb)
 #endif
-		queue_ch_frame(&bch->ch, PH_DATA_IND, rx_counter, nskb);
+			queue_ch_frame(&bch->ch, PH_DATA_IND, rx_counter, nskb);
 	}
 }
 
@@ -660,21 +656,29 @@ l1oip_socket_thread(void *data)
 	struct l1oip *hc = (struct l1oip *)data;
 	int ret = 0;
 	struct msghdr msg;
-	struct iovec iov;
-	mm_segment_t oldfs;
 	struct sockaddr_in sin_rx;
-	unsigned char recvbuf[1500];
+	unsigned char *recvbuf;
+	size_t recvbuf_size = 1500;
 	int recvlen;
 	struct socket *socket = NULL;
 	DECLARE_COMPLETION(wait);
 
+	/* allocate buffer memory */
+	recvbuf = kmalloc(recvbuf_size, GFP_KERNEL);
+	if (!recvbuf) {
+		printk(KERN_ERR "%s: Failed to alloc recvbuf.\n", __func__);
+		ret = -ENOMEM;
+		goto fail;
+	}
+
 	/* make daemon */
 	allow_signal(SIGTERM);
 
 	/* create socket */
 	if (sock_create(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &socket)) {
 		printk(KERN_ERR "%s: Failed to create socket.\n", __func__);
-		return -EIO;
+		ret = -EIO;
+		goto fail;
 	}
 
 	/* set incoming address */
@@ -708,16 +712,12 @@ l1oip_socket_thread(void *data)
 	msg.msg_namelen = sizeof(sin_rx);
 	msg.msg_control = NULL;
 	msg.msg_controllen = 0;
-	msg.msg_iov = &iov;
-	msg.msg_iovlen = 1;
 
 	/* build send message */
 	hc->sendmsg.msg_name = &hc->sin_remote;
 	hc->sendmsg.msg_namelen = sizeof(hc->sin_remote);
 	hc->sendmsg.msg_control = NULL;
 	hc->sendmsg.msg_controllen = 0;
-	hc->sendmsg.msg_iov    = &hc->sendiov;
-	hc->sendmsg.msg_iovlen = 1;
 
 	/* give away socket */
 	spin_lock(&hc->socket_lock);
@@ -729,18 +729,18 @@ l1oip_socket_thread(void *data)
 		printk(KERN_DEBUG "%s: socket created and open\n",
 			__func__);
 	while (!signal_pending(current)) {
-		iov.iov_base = recvbuf;
-		iov.iov_len = sizeof(recvbuf);
-		oldfs = get_fs();
-		set_fs(KERNEL_DS);
-		recvlen = sock_recvmsg(socket, &msg, sizeof(recvbuf), 0);
-		set_fs(oldfs);
+		struct kvec iov = {
+			.iov_base = recvbuf,
+			.iov_len = sizeof(recvbuf),
+		};
+		recvlen = kernel_recvmsg(socket, &msg, &iov, 1,
+					 sizeof(recvbuf), 0);
 		if (recvlen > 0) {
 			l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
 		} else {
 			if (debug & DEBUG_L1OIP_SOCKET)
-			    printk(KERN_WARNING "%s: broken pipe on socket\n",
-				__func__);
+				printk(KERN_WARNING
+				    "%s: broken pipe on socket\n", __func__);
 		}
 	}
 
@@ -760,6 +760,9 @@ l1oip_socket_thread(void *data)
 			__func__);
 
 fail:
+	/* free recvbuf */
+	kfree(recvbuf);
+
 	/* close socket */
 	if (socket)
 		sock_release(socket);
@@ -912,7 +915,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 		p = skb->data;
 		l = skb->len;
 		while (l) {
-			ll = (l < L1OIP_MAX_PERFRAME)?l:L1OIP_MAX_PERFRAME;
+			ll = (l < L1OIP_MAX_PERFRAME) ? l : L1OIP_MAX_PERFRAME;
 			l1oip_socket_send(hc, 0, dch->slot, 0,
 				hc->chan[dch->slot].tx_counter++, p, ll);
 			p += ll;
@@ -1160,7 +1163,7 @@ handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
 		p = skb->data;
 		l = skb->len;
 		while (l) {
-			ll = (l < L1OIP_MAX_PERFRAME)?l:L1OIP_MAX_PERFRAME;
+			ll = (l < L1OIP_MAX_PERFRAME) ? l : L1OIP_MAX_PERFRAME;
 			l1oip_socket_send(hc, hc->codec, bch->slot, 0,
 				hc->chan[bch->slot].tx_counter, p, ll);
 			hc->chan[bch->slot].tx_counter += ll;
@@ -1318,8 +1321,8 @@ init_card(struct l1oip *hc, int pri, int bundle)
 	spin_lock_init(&hc->socket_lock);
 	hc->idx = l1oip_cnt;
 	hc->pri = pri;
-	hc->d_idx = pri?16:3;
-	hc->b_num = pri?30:2;
+	hc->d_idx = pri ? 16 : 3;
+	hc->b_num = pri ? 30 : 2;
 	hc->bundle = bundle;
 	if (hc->pri)
 		sprintf(hc->name, "l1oip-e1.%d", l1oip_cnt + 1);
@@ -1504,9 +1507,9 @@ l1oip_init(void)
 
 		if (debug & DEBUG_L1OIP_INIT)
 			printk(KERN_DEBUG "%s: interface %d is %s with %s.\n",
-				__func__, l1oip_cnt, pri?"PRI":"BRI",
-				bundle?"bundled IP packet for all B-channels"
-				 :"seperate IP packets for every B-channel");
+			    __func__, l1oip_cnt, pri ? "PRI" : "BRI",
+			    bundle ? "bundled IP packet for all B-channels" :
+			    "seperate IP packets for every B-channel");
 
 		hc = kzalloc(sizeof(struct l1oip), GFP_ATOMIC);
 		if (!hc) {
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index d6e2863f224..9c2589e986d 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -99,7 +99,7 @@ l2m_debug(struct FsmInst *fi, char *fmt, ...)
 	if (!(*debug & DEBUG_L2_FSM))
 		return;
 	va_start(va, fmt);
-	printk(KERN_DEBUG "l2 (tei %d): ", l2->tei);
+	printk(KERN_DEBUG "l2 (sapi %d tei %d): ", l2->sapi, l2->tei);
 	vprintk(fmt, va);
 	printk("\n");
 	va_end(va);
@@ -1859,20 +1859,18 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
 		psapi >>= 2;
 		ptei >>= 1;
 		if (psapi != l2->sapi) {
-			/* not our bussiness
-			 * printk(KERN_DEBUG "%s: sapi %d/%d sapi mismatch\n",
-			 *  __func__,
-			 *	psapi, l2->sapi);
-			 */
+			/* not our bussiness */
+			if (*debug & DEBUG_L2)
+				printk(KERN_DEBUG "%s: sapi %d/%d mismatch\n",
+					__func__, psapi, l2->sapi);
 			dev_kfree_skb(skb);
 			return 0;
 		}
 		if ((ptei != l2->tei) && (ptei != GROUP_TEI)) {
-			/* not our bussiness
-			 * printk(KERN_DEBUG "%s: tei %d/%d sapi %d mismatch\n",
-			 *  __func__,
-			 *	ptei, l2->tei, psapi);
-			 */
+			/* not our bussiness */
+			if (*debug & DEBUG_L2)
+				printk(KERN_DEBUG "%s: tei %d/%d mismatch\n",
+					__func__, ptei, l2->tei);
 			dev_kfree_skb(skb);
 			return 0;
 		}
@@ -1927,8 +1925,8 @@ l2_send(struct mISDNchannel *ch, struct sk_buff *skb)
 	int 			ret = -EINVAL;
 
 	if (*debug & DEBUG_L2_RECV)
-		printk(KERN_DEBUG "%s: prim(%x) id(%x) tei(%d)\n",
-		    __func__, hh->prim, hh->id, l2->tei);
+		printk(KERN_DEBUG "%s: prim(%x) id(%x) sapi(%d) tei(%d)\n",
+		    __func__, hh->prim, hh->id, l2->sapi, l2->tei);
 	switch (hh->prim) {
 	case PH_DATA_IND:
 		ret = ph_data_indication(l2, hh, skb);
@@ -2068,7 +2066,8 @@ l2_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 }
 
 struct layer2 *
-create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
+create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, int tei,
+		int sapi)
 {
 	struct layer2		*l2;
 	struct channel_req	rq;
@@ -2089,7 +2088,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
 		test_and_set_bit(FLG_LAPD, &l2->flag);
 		test_and_set_bit(FLG_LAPD_NET, &l2->flag);
 		test_and_set_bit(FLG_MOD128, &l2->flag);
-		l2->sapi = 0;
+		l2->sapi = sapi;
 		l2->maxlen = MAX_DFRAME_LEN;
 		if (test_bit(OPTION_L2_PMX, &options))
 			l2->window = 7;
@@ -2099,7 +2098,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
 			test_and_set_bit(FLG_PTP, &l2->flag);
 		if (test_bit(OPTION_L2_FIXEDTEI, &options))
 			test_and_set_bit(FLG_FIXED_TEI, &l2->flag);
-		l2->tei = (u_int)arg;
+		l2->tei = tei;
 		l2->T200 = 1000;
 		l2->N200 = 3;
 		l2->T203 = 10000;
@@ -2114,7 +2113,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
 		test_and_set_bit(FLG_LAPD, &l2->flag);
 		test_and_set_bit(FLG_MOD128, &l2->flag);
 		test_and_set_bit(FLG_ORIG, &l2->flag);
-		l2->sapi = 0;
+		l2->sapi = sapi;
 		l2->maxlen = MAX_DFRAME_LEN;
 		if (test_bit(OPTION_L2_PMX, &options))
 			l2->window = 7;
@@ -2124,7 +2123,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
 			test_and_set_bit(FLG_PTP, &l2->flag);
 		if (test_bit(OPTION_L2_FIXEDTEI, &options))
 			test_and_set_bit(FLG_FIXED_TEI, &l2->flag);
-		l2->tei = (u_int)arg;
+		l2->tei = tei;
 		l2->T200 = 1000;
 		l2->N200 = 3;
 		l2->T203 = 10000;
@@ -2180,7 +2179,7 @@ x75create(struct channel_req *crq)
 
 	if (crq->protocol != ISDN_P_B_X75SLP)
 		return -EPROTONOSUPPORT;
-	l2 = create_l2(crq->ch, crq->protocol, 0, 0);
+	l2 = create_l2(crq->ch, crq->protocol, 0, 0, 0);
 	if (!l2)
 		return -ENOMEM;
 	crq->ch = &l2->ch;
diff --git a/drivers/isdn/mISDN/layer2.h b/drivers/isdn/mISDN/layer2.h
index 6293f80dc2d..9547fb3707a 100644
--- a/drivers/isdn/mISDN/layer2.h
+++ b/drivers/isdn/mISDN/layer2.h
@@ -90,7 +90,7 @@ enum {
 #define L2_STATE_COUNT (ST_L2_8+1)
 
 extern struct layer2	*create_l2(struct mISDNchannel *, u_int,
-				u_long, u_long);
+				u_long, int, int);
 extern int		tei_l2(struct layer2 *, u_int, u_long arg);
 
 
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 508945d1b9c..c36f5213745 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -209,7 +209,7 @@ mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
 		err = -EFAULT;
-		goto drop;
+		goto done;
 	}
 
 	memcpy(mISDN_HEAD_P(skb), skb->data, MISDN_HEADER_LEN);
@@ -222,7 +222,7 @@ mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	} else { /* use default for L2 messages */
 		if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
 		    (sk->sk_protocol == ISDN_P_LAPD_NT))
-		    mISDN_HEAD_ID(skb) = _pms(sk)->ch.nr;
+			mISDN_HEAD_ID(skb) = _pms(sk)->ch.nr;
 	}
 
 	if (*debug & DEBUG_SOCKET)
@@ -230,19 +230,21 @@ mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 		     __func__, mISDN_HEAD_ID(skb));
 
 	err = -ENODEV;
-	if (!_pms(sk)->ch.peer ||
-	    (err = _pms(sk)->ch.recv(_pms(sk)->ch.peer, skb)))
-		goto drop;
-
-	err = len;
+	if (!_pms(sk)->ch.peer)
+		goto done;
+	err = _pms(sk)->ch.recv(_pms(sk)->ch.peer, skb);
+	if (err)
+		goto done;
+	else {
+		skb = NULL;
+		err = len;
+	}
 
 done:
+	if (skb)
+		kfree_skb(skb);
 	release_sock(sk);
 	return err;
-
-drop:
-	kfree_skb(skb);
-	goto done;
 }
 
 static int
@@ -292,7 +294,7 @@ static int
 data_sock_ioctl_bound(struct sock *sk, unsigned int cmd, void __user *p)
 {
 	struct mISDN_ctrl_req	cq;
-	int			err = -EINVAL, val;
+	int			err = -EINVAL, val[2];
 	struct mISDNchannel	*bchan, *next;
 
 	lock_sock(sk);
@@ -328,12 +330,27 @@ data_sock_ioctl_bound(struct sock *sk, unsigned int cmd, void __user *p)
 			err = -EINVAL;
 			break;
 		}
-		if (get_user(val, (int __user *)p)) {
+		val[0] = cmd;
+		if (get_user(val[1], (int __user *)p)) {
+			err = -EFAULT;
+			break;
+		}
+		err = _pms(sk)->dev->teimgr->ctrl(_pms(sk)->dev->teimgr,
+		    CONTROL_CHANNEL, val);
+		break;
+	case IMHOLD_L1:
+		if (sk->sk_protocol != ISDN_P_LAPD_NT
+		 && sk->sk_protocol != ISDN_P_LAPD_TE) {
+			err = -EINVAL;
+			break;
+		}
+		val[0] = cmd;
+		if (get_user(val[1], (int __user *)p)) {
 			err = -EFAULT;
 			break;
 		}
 		err = _pms(sk)->dev->teimgr->ctrl(_pms(sk)->dev->teimgr,
-		    CONTROL_CHANNEL, &val);
+		    CONTROL_CHANNEL, val);
 		break;
 	default:
 		err = -EINVAL;
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index b452dead8fd..e04bad6c5ba 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -122,8 +122,11 @@ da_deactivate(struct FsmInst *fi, int event, void *arg)
 	}
 	read_unlock_irqrestore(&mgr->lock, flags);
 	/* All TEI are inactiv */
-	mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER, NULL, 1);
-	mISDN_FsmChangeState(fi, ST_L1_DEACT_PENDING);
+	if (!test_bit(OPTION_L1_HOLD, &mgr->options)) {
+		mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER,
+			NULL, 1);
+		mISDN_FsmChangeState(fi, ST_L1_DEACT_PENDING);
+	}
 }
 
 static void
@@ -132,9 +135,11 @@ da_ui(struct FsmInst *fi, int event, void *arg)
 	struct manager	*mgr = fi->userdata;
 
 	/* restart da timer */
-	mISDN_FsmDelTimer(&mgr->datimer, 2);
-	mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER, NULL, 2);
-
+	if (!test_bit(OPTION_L1_HOLD, &mgr->options)) {
+		mISDN_FsmDelTimer(&mgr->datimer, 2);
+		mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER,
+			NULL, 2);
+	}
 }
 
 static void
@@ -222,7 +227,7 @@ tei_debug(struct FsmInst *fi, char *fmt, ...)
 	if (!(*debug & DEBUG_L2_TEIFSM))
 		return;
 	va_start(va, fmt);
-	printk(KERN_DEBUG "tei(%d): ", tm->l2->tei);
+	printk(KERN_DEBUG "sapi(%d) tei(%d): ", tm->l2->sapi, tm->l2->tei);
 	vprintk(fmt, va);
 	printk("\n");
 	va_end(va);
@@ -421,7 +426,7 @@ done:
 }
 
 static void
-put_tei_msg(struct manager *mgr, u_char m_id, unsigned int ri, u_char tei)
+put_tei_msg(struct manager *mgr, u_char m_id, unsigned int ri, int tei)
 {
 	struct sk_buff *skb;
 	u_char bp[8];
@@ -435,9 +440,8 @@ put_tei_msg(struct manager *mgr, u_char m_id, unsigned int ri, u_char tei)
 	bp[4] = ri >> 8;
 	bp[5] = ri & 0xff;
 	bp[6] = m_id;
-	bp[7] = (tei << 1) | 1;
-	skb = _alloc_mISDN_skb(PH_DATA_REQ, new_id(mgr),
-	    8, bp, GFP_ATOMIC);
+	bp[7] = ((tei << 1) & 0xff) | 1;
+	skb = _alloc_mISDN_skb(PH_DATA_REQ, new_id(mgr), 8, bp, GFP_ATOMIC);
 	if (!skb) {
 		printk(KERN_WARNING "%s: no skb for tei msg\n", __func__);
 		return;
@@ -772,7 +776,7 @@ tei_ph_data_ind(struct teimgr *tm, u_int mt, u_char *dp, int len)
 }
 
 static struct layer2 *
-create_new_tei(struct manager *mgr, int tei)
+create_new_tei(struct manager *mgr, int tei, int sapi)
 {
 	u_long		opt = 0;
 	u_long		flags;
@@ -781,12 +785,12 @@ create_new_tei(struct manager *mgr, int tei)
 
 	if (!mgr->up)
 		return NULL;
-	if (tei < 64)
+	if ((tei >= 0) && (tei < 64))
 		test_and_set_bit(OPTION_L2_FIXEDTEI, &opt);
 	if (mgr->ch.st->dev->Dprotocols
 	  & ((1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1)))
 		test_and_set_bit(OPTION_L2_PMX, &opt);
-	l2 = create_l2(mgr->up, ISDN_P_LAPD_NT, (u_int)opt, (u_long)tei);
+	l2 = create_l2(mgr->up, ISDN_P_LAPD_NT, opt, tei, sapi);
 	if (!l2) {
 		printk(KERN_WARNING "%s:no memory for layer2\n", __func__);
 		return NULL;
@@ -834,12 +838,17 @@ new_tei_req(struct manager *mgr, u_char *dp)
 	ri += dp[1];
 	if (!mgr->up)
 		goto denied;
-	tei = get_free_tei(mgr);
+	if (!(dp[3] & 1)) /* Extension bit != 1 */
+		goto denied;
+	if (dp[3] != 0xff)
+		tei = dp[3] >> 1; /* 3GPP TS 08.56 6.1.11.2 */
+	else
+		tei = get_free_tei(mgr);
 	if (tei < 0) {
 		printk(KERN_WARNING "%s:No free tei\n", __func__);
 		goto denied;
 	}
-	l2 = create_new_tei(mgr, tei);
+	l2 = create_new_tei(mgr, tei, CTRL_SAPI);
 	if (!l2)
 		goto denied;
 	else
@@ -853,8 +862,7 @@ static int
 ph_data_ind(struct manager *mgr, struct sk_buff *skb)
 {
 	int		ret = -EINVAL;
-	struct layer2	*l2;
-	u_long		flags;
+	struct layer2	*l2, *nl2;
 	u_char		mt;
 
 	if (skb->len < 8) {
@@ -863,7 +871,6 @@ ph_data_ind(struct manager *mgr, struct sk_buff *skb)
 			    __func__, skb->len);
 		goto done;
 	}
-	if (*debug  & DEBUG_L2_TEI)
 
 	if ((skb->data[0] >> 2) != TEI_SAPI) /* not for us */
 		goto done;
@@ -900,11 +907,9 @@ ph_data_ind(struct manager *mgr, struct sk_buff *skb)
 		new_tei_req(mgr, &skb->data[4]);
 		goto done;
 	}
-	read_lock_irqsave(&mgr->lock, flags);
-	list_for_each_entry(l2, &mgr->layer2, list) {
+	list_for_each_entry_safe(l2, nl2, &mgr->layer2, list) {
 		tei_ph_data_ind(l2->tm, mt, &skb->data[4], skb->len - 4);
 	}
-	read_unlock_irqrestore(&mgr->lock, flags);
 done:
 	return ret;
 }
@@ -971,8 +976,6 @@ create_teimgr(struct manager *mgr, struct channel_req *crq)
 			__func__, dev_name(&mgr->ch.st->dev->dev),
 			crq->protocol, crq->adr.dev, crq->adr.channel,
 			crq->adr.sapi, crq->adr.tei);
-	if (crq->adr.sapi != 0) /* not supported yet */
-		return -EINVAL;
 	if (crq->adr.tei > GROUP_TEI)
 		return -EINVAL;
 	if (crq->adr.tei < 64)
@@ -1019,8 +1022,8 @@ create_teimgr(struct manager *mgr, struct channel_req *crq)
 		}
 		return 0;
 	}
-	l2 = create_l2(crq->ch, crq->protocol, (u_int)opt,
-		(u_long)crq->adr.tei);
+	l2 = create_l2(crq->ch, crq->protocol, opt,
+		crq->adr.tei, crq->adr.sapi);
 	if (!l2)
 		return -ENOMEM;
 	l2->tm = kzalloc(sizeof(struct teimgr), GFP_KERNEL);
@@ -1103,6 +1106,7 @@ free_teimanager(struct manager *mgr)
 {
 	struct layer2	*l2, *nl2;
 
+	test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
 	if (test_bit(MGR_OPT_NETWORK, &mgr->options)) {
 		/* not locked lock is taken in release tei */
 		mgr->up = NULL;
@@ -1133,13 +1137,26 @@ static int
 ctrl_teimanager(struct manager *mgr, void *arg)
 {
 	/* currently we only have one option */
-	int	clean = *((int *)arg);
-
-	if (clean)
-		test_and_set_bit(OPTION_L2_CLEANUP, &mgr->options);
-	else
-		test_and_clear_bit(OPTION_L2_CLEANUP, &mgr->options);
-	return 0;
+	int	*val = (int *)arg;
+	int	ret = 0;
+
+	switch (val[0]) {
+	case IMCLEAR_L2:
+		if (val[1])
+			test_and_set_bit(OPTION_L2_CLEANUP, &mgr->options);
+		else
+			test_and_clear_bit(OPTION_L2_CLEANUP, &mgr->options);
+		break;
+	case IMHOLD_L1:
+		if (val[1])
+			test_and_set_bit(OPTION_L1_HOLD, &mgr->options);
+		else
+			test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
 }
 
 /* This function does create a L2 for fixed TEI in NT Mode */
@@ -1147,7 +1164,7 @@ static int
 check_data(struct manager *mgr, struct sk_buff *skb)
 {
 	struct mISDNhead	*hh =  mISDN_HEAD_P(skb);
-	int			ret, tei;
+	int			ret, tei, sapi;
 	struct layer2		*l2;
 
 	if (*debug & DEBUG_L2_CTRL)
@@ -1159,20 +1176,27 @@ check_data(struct manager *mgr, struct sk_buff *skb)
 		return -ENOTCONN;
 	if (skb->len != 3)
 		return -ENOTCONN;
-	if (skb->data[0] != 0)
-		/* only SAPI 0 command */
-		return -ENOTCONN;
+	if (skb->data[0] & 3) /* EA0 and CR must be  0 */
+		return -EINVAL;
+	sapi = skb->data[0] >> 2;
 	if (!(skb->data[1] & 1)) /* invalid EA1 */
 		return -EINVAL;
-	tei = skb->data[1] >> 0;
+	tei = skb->data[1] >> 1;
 	if (tei > 63) /* not a fixed tei */
 		return -ENOTCONN;
 	if ((skb->data[2] & ~0x10) != SABME)
 		return -ENOTCONN;
 	/* We got a SABME for a fixed TEI */
-	l2 = create_new_tei(mgr, tei);
-	if (!l2)
+	if (*debug & DEBUG_L2_CTRL)
+		printk(KERN_DEBUG "%s: SABME sapi(%d) tei(%d)\n",
+		    __func__, sapi, tei);
+	l2 = create_new_tei(mgr, tei, sapi);
+	if (!l2) {
+		if (*debug & DEBUG_L2_CTRL)
+			printk(KERN_DEBUG "%s: failed to create new tei\n",
+			    __func__);
 		return -ENOMEM;
+	}
 	ret = l2->ch.send(&l2->ch, skb);
 	return ret;
 }
diff --git a/drivers/isdn/mISDN/timerdev.c b/drivers/isdn/mISDN/timerdev.c
index bbd99d3282c..5b7e9bf514f 100644
--- a/drivers/isdn/mISDN/timerdev.c
+++ b/drivers/isdn/mISDN/timerdev.c
@@ -259,7 +259,7 @@ mISDN_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
 	return ret;
 }
 
-static struct file_operations mISDN_fops = {
+static const struct file_operations mISDN_fops = {
 	.read		= mISDN_read,
 	.poll		= mISDN_poll,
 	.ioctl		= mISDN_ioctl,
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 1aa46a390a0..173d104d9ff 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index aa2e7ae0cda..aa7acf3b922 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index c0621d50c8a..fde377c60cc 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -37,6 +37,7 @@
 #define CONFIG_REG   0x40
 #define MANUAL_MASK  0xe0
 #define AUTO_MASK    0x20
+#define INVERT_MASK  0x10
 
 static u8 TEMP_REG[3]    = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
 static u8 LIMIT_REG[3]   = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
@@ -71,7 +72,7 @@ MODULE_PARM_DESC(verbose,"Verbose log operations "
 		 "(default 0)");
 
 struct thermostat {
-	struct i2c_client	clt;
+	struct i2c_client	*clt;
 	u8			temps[3];
 	u8			cached_temp[3];
 	u8			initial_limits[3];
@@ -86,9 +87,6 @@ static struct of_device * of_dev;
 static struct thermostat* thermostat;
 static struct task_struct *thread_therm = NULL;
 
-static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
-				 int busno);
-
 static void write_both_fan_speed(struct thermostat *th, int speed);
 static void write_fan_speed(struct thermostat *th, int speed, int fan);
 
@@ -100,7 +98,7 @@ write_reg(struct thermostat* th, int reg, u8 data)
 	
 	tmp[0] = reg;
 	tmp[1] = data;
-	rc = i2c_master_send(&th->clt, (const char *)tmp, 2);
+	rc = i2c_master_send(th->clt, (const char *)tmp, 2);
 	if (rc < 0)
 		return rc;
 	if (rc != 2)
@@ -115,12 +113,12 @@ read_reg(struct thermostat* th, int reg)
 	int rc;
 
 	reg_addr = (u8)reg;
-	rc = i2c_master_send(&th->clt, &reg_addr, 1);
+	rc = i2c_master_send(th->clt, &reg_addr, 1);
 	if (rc < 0)
 		return rc;
 	if (rc != 1)
 		return -ENODEV;
-	rc = i2c_master_recv(&th->clt, (char *)&data, 1);
+	rc = i2c_master_recv(th->clt, (char *)&data, 1);
 	if (rc < 0)
 		return rc;
 	return data;
@@ -130,26 +128,36 @@ static int
 attach_thermostat(struct i2c_adapter *adapter)
 {
 	unsigned long bus_no;
+	struct i2c_board_info info;
+	struct i2c_client *client;
 
 	if (strncmp(adapter->name, "uni-n", 5))
 		return -ENODEV;
 	bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
 	if (bus_no != therm_bus)
 		return -ENODEV;
-	return attach_one_thermostat(adapter, therm_address, bus_no);
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE);
+	info.addr = therm_address;
+	client = i2c_new_device(adapter, &info);
+	if (!client)
+		return -ENODEV;
+
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return 0;
 }
 
 static int
-detach_thermostat(struct i2c_adapter *adapter)
+remove_thermostat(struct i2c_client *client)
 {
-	struct thermostat* th;
+	struct thermostat *th = i2c_get_clientdata(client);
 	int i;
 	
-	if (thermostat == NULL)
-		return 0;
-
-	th = thermostat;
-
 	if (thread_therm != NULL) {
 		kthread_stop(thread_therm);
 	}
@@ -165,8 +173,6 @@ detach_thermostat(struct i2c_adapter *adapter)
 
 	write_both_fan_speed(th, -1);
 
-	i2c_detach_client(&th->clt);
-
 	thermostat = NULL;
 
 	kfree(th);
@@ -174,14 +180,6 @@ detach_thermostat(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static struct i2c_driver thermostat_driver = {  
-	.driver = {
-		.name	= "therm_adt746x",
-	},
-	.attach_adapter	= attach_thermostat,
-	.detach_adapter	= detach_thermostat,
-};
-
 static int read_fan_speed(struct thermostat *th, u8 addr)
 {
 	u8 tmp[2];
@@ -229,7 +227,8 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
 	
 	if (speed >= 0) {
 		manual = read_reg(th, MANUAL_MODE[fan]);
-		write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK);
+		write_reg(th, MANUAL_MODE[fan],
+			(manual|MANUAL_MASK) & (~INVERT_MASK));
 		write_reg(th, FAN_SPD_SET[fan], speed);
 	} else {
 		/* back to automatic */
@@ -369,8 +368,8 @@ static void set_limit(struct thermostat *th, int i)
 		th->limits[i] = default_limits_local[i] + limit_adjust;
 }
 
-static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
-				 int busno)
+static int probe_thermostat(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
 	struct thermostat* th;
 	int rc;
@@ -383,16 +382,12 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
 	if (!th)
 		return -ENOMEM;
 
-	th->clt.addr = addr;
-	th->clt.adapter = adapter;
-	th->clt.driver = &thermostat_driver;
-	strcpy(th->clt.name, "thermostat");
+	i2c_set_clientdata(client, th);
+	th->clt = client;
 
 	rc = read_reg(th, 0);
 	if (rc < 0) {
-		printk(KERN_ERR "adt746x: Thermostat failed to read config "
-				"from bus %d !\n",
-				busno);
+		dev_err(&client->dev, "Thermostat failed to read config!\n");
 		kfree(th);
 		return -ENODEV;
 	}
@@ -421,14 +416,6 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
 
 	thermostat = th;
 
-	if (i2c_attach_client(&th->clt)) {
-		printk(KERN_INFO "adt746x: Thermostat failed to attach "
-				 "client !\n");
-		thermostat = NULL;
-		kfree(th);
-		return -ENODEV;
-	}
-
 	/* be sure to really write fan speed the first time */
 	th->last_speed[0] = -2;
 	th->last_speed[1] = -2;
@@ -454,6 +441,21 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
 	return 0;
 }
 
+static const struct i2c_device_id therm_adt746x_id[] = {
+	{ "therm_adt746x", 0 },
+	{ }
+};
+
+static struct i2c_driver thermostat_driver = {
+	.driver = {
+		.name	= "therm_adt746x",
+	},
+	.attach_adapter	= attach_thermostat,
+	.probe = probe_thermostat,
+	.remove = remove_thermostat,
+	.id_table = therm_adt746x_id,
+};
+
 /* 
  * Now, unfortunately, sysfs doesn't give us a nice void * we could
  * pass around to the attribute functions, so we don't really have
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 817607e2af6..a028598af2d 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -287,22 +287,6 @@ struct fcu_fan_table	fcu_fans[] = {
 };
 
 /*
- * i2c_driver structure to attach to the host i2c controller
- */
-
-static int therm_pm72_attach(struct i2c_adapter *adapter);
-static int therm_pm72_detach(struct i2c_adapter *adapter);
-
-static struct i2c_driver therm_pm72_driver =
-{
-	.driver = {
-		.name	= "therm_pm72",
-	},
-	.attach_adapter	= therm_pm72_attach,
-	.detach_adapter	= therm_pm72_detach,
-};
-
-/*
  * Utility function to create an i2c_client structure and
  * attach it to one of u3 adapters
  */
@@ -310,6 +294,7 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
 {
 	struct i2c_client *clt;
 	struct i2c_adapter *adap;
+	struct i2c_board_info info;
 
 	if (id & 0x200)
 		adap = k2;
@@ -320,31 +305,21 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name)
 	if (adap == NULL)
 		return NULL;
 
-	clt = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (clt == NULL)
-		return NULL;
-
-	clt->addr = (id >> 1) & 0x7f;
-	clt->adapter = adap;
-	clt->driver = &therm_pm72_driver;
-	strncpy(clt->name, name, I2C_NAME_SIZE-1);
-
-	if (i2c_attach_client(clt)) {
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = (id >> 1) & 0x7f;
+	strlcpy(info.type, "therm_pm72", I2C_NAME_SIZE);
+	clt = i2c_new_device(adap, &info);
+	if (!clt) {
 		printk(KERN_ERR "therm_pm72: Failed to attach to i2c ID 0x%x\n", id);
-		kfree(clt);
 		return NULL;
 	}
-	return clt;
-}
 
-/*
- * Utility function to get rid of the i2c_client structure
- * (will also detach from the adapter hopepfully)
- */
-static void detach_i2c_chip(struct i2c_client *clt)
-{
-	i2c_detach_client(clt);
-	kfree(clt);
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&clt->detected, &clt->driver->clients);
+	return clt;
 }
 
 /*
@@ -1203,8 +1178,6 @@ static int init_cpu_state(struct cpu_pid_state *state, int index)
 
 	return 0;
  fail:
-	if (state->monitor)
-		detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 	
 	return -ENODEV;
@@ -1232,7 +1205,6 @@ static void dispose_cpu_state(struct cpu_pid_state *state)
 		device_remove_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm);
 	}
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
 
@@ -1407,7 +1379,6 @@ static void dispose_backside_state(struct backside_pid_state *state)
 	device_remove_file(&of_dev->dev, &dev_attr_backside_temperature);
 	device_remove_file(&of_dev->dev, &dev_attr_backside_fan_pwm);
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
  
@@ -1532,7 +1503,6 @@ static void dispose_drives_state(struct drives_pid_state *state)
 	device_remove_file(&of_dev->dev, &dev_attr_drives_temperature);
 	device_remove_file(&of_dev->dev, &dev_attr_drives_fan_rpm);
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
 
@@ -1654,7 +1624,6 @@ static void dispose_dimms_state(struct dimm_pid_state *state)
 
 	device_remove_file(&of_dev->dev, &dev_attr_dimms_temperature);
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
 
@@ -1779,7 +1748,6 @@ static void dispose_slots_state(struct slots_pid_state *state)
 	device_remove_file(&of_dev->dev, &dev_attr_slots_temperature);
 	device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm);
 
-	detach_i2c_chip(state->monitor);
 	state->monitor = NULL;
 }
 
@@ -2008,8 +1976,6 @@ static int attach_fcu(void)
  */
 static void detach_fcu(void)
 {
-	if (fcu)
-		detach_i2c_chip(fcu);
 	fcu = NULL;
 }
 
@@ -2060,12 +2026,21 @@ static int therm_pm72_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
+static int therm_pm72_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	/* Always succeed, the real work was done in therm_pm72_attach() */
+	return 0;
+}
+
 /*
- * Called on every adapter when the driver or the i2c controller
+ * Called when any of the devices which participates into thermal management
  * is going away.
  */
-static int therm_pm72_detach(struct i2c_adapter *adapter)
+static int therm_pm72_remove(struct i2c_client *client)
 {
+	struct i2c_adapter *adapter = client->adapter;
+
 	mutex_lock(&driver_lock);
 
 	if (state != state_detached)
@@ -2096,6 +2071,30 @@ static int therm_pm72_detach(struct i2c_adapter *adapter)
 	return 0;
 }
 
+/*
+ * i2c_driver structure to attach to the host i2c controller
+ */
+
+static const struct i2c_device_id therm_pm72_id[] = {
+	/*
+	 * Fake device name, thermal management is done by several
+	 * chips but we don't need to differentiate between them at
+	 * this point.
+	 */
+	{ "therm_pm72", 0 },
+	{ }
+};
+
+static struct i2c_driver therm_pm72_driver = {
+	.driver = {
+		.name	= "therm_pm72",
+	},
+	.attach_adapter	= therm_pm72_attach,
+	.probe		= therm_pm72_probe,
+	.remove		= therm_pm72_remove,
+	.id_table	= therm_pm72_id,
+};
+
 static int fan_check_loc_match(const char *loc, int fan)
 {
 	char	tmp[64];
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 3da0a02efd7..40023313a76 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -48,16 +48,6 @@
 
 #define LOG_TEMP		0			/* continously log temperature */
 
-static int 			do_probe( struct i2c_adapter *adapter, int addr, int kind);
-
-/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
-static const unsigned short	normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
-						 0x4c, 0x4d, 0x4e, 0x4f,
-						 0x2c, 0x2d, 0x2e, 0x2f,
-						 I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static struct {
 	volatile int		running;
 	struct task_struct	*poll_task;
@@ -315,53 +305,54 @@ static int control_loop(void *dummy)
 static int
 do_attach( struct i2c_adapter *adapter )
 {
-	int ret = 0;
+	/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
+	static const unsigned short scan_ds1775[] = {
+		0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+		I2C_CLIENT_END
+	};
+	static const unsigned short scan_adm1030[] = {
+		0x2c, 0x2d, 0x2e, 0x2f,
+		I2C_CLIENT_END
+	};
 
 	if( strncmp(adapter->name, "uni-n", 5) )
 		return 0;
 
 	if( !x.running ) {
-		ret = i2c_probe( adapter, &addr_data, &do_probe );
+		struct i2c_board_info info;
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
+		i2c_new_probed_device(adapter, &info, scan_ds1775);
+
+		strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
+		i2c_new_probed_device(adapter, &info, scan_adm1030);
+
 		if( x.thermostat && x.fan ) {
 			x.running = 1;
 			x.poll_task = kthread_run(control_loop, NULL, "g4fand");
 		}
 	}
-	return ret;
+	return 0;
 }
 
 static int
-do_detach( struct i2c_client *client )
+do_remove(struct i2c_client *client)
 {
-	int err;
-
-	if( (err=i2c_detach_client(client)) )
-		printk(KERN_ERR "failed to detach thermostat client\n");
-	else {
-		if( x.running ) {
-			x.running = 0;
-			kthread_stop(x.poll_task);
-			x.poll_task = NULL;
-		}
-		if( client == x.thermostat )
-			x.thermostat = NULL;
-		else if( client == x.fan )
-			x.fan = NULL;
-		else {
-			printk(KERN_ERR "g4fan: bad client\n");
-		}
-		kfree( client );
+	if (x.running) {
+		x.running = 0;
+		kthread_stop(x.poll_task);
+		x.poll_task = NULL;
 	}
-	return err;
-}
+	if (client == x.thermostat)
+		x.thermostat = NULL;
+	else if (client == x.fan)
+		x.fan = NULL;
+	else
+		printk(KERN_ERR "g4fan: bad client\n");
 
-static struct i2c_driver g4fan_driver = {  
-	.driver = {
-		.name	= "therm_windtunnel",
-	},
-	.attach_adapter = do_attach,
-	.detach_client	= do_detach,
-};
+	return 0;
+}
 
 static int
 attach_fan( struct i2c_client *cl )
@@ -374,13 +365,8 @@ attach_fan( struct i2c_client *cl )
 		goto out;
 	printk("ADM1030 fan controller [@%02x]\n", cl->addr );
 
-	strlcpy( cl->name, "ADM1030 fan controller", sizeof(cl->name) );
-
-	if( !i2c_attach_client(cl) )
-		x.fan = cl;
+	x.fan = cl;
  out:
-	if( cl != x.fan )
-		kfree( cl );
 	return 0;
 }
 
@@ -412,39 +398,47 @@ attach_thermostat( struct i2c_client *cl )
 	x.temp = temp;
 	x.overheat_temp = os_temp;
 	x.overheat_hyst = hyst_temp;
-	
-	strlcpy( cl->name, "DS1775 thermostat", sizeof(cl->name) );
-
-	if( !i2c_attach_client(cl) )
-		x.thermostat = cl;
+	x.thermostat = cl;
 out:
-	if( cl != x.thermostat )
-		kfree( cl );
 	return 0;
 }
 
+enum chip { ds1775, adm1030 };
+
+static const struct i2c_device_id therm_windtunnel_id[] = {
+	{ "therm_ds1775", ds1775 },
+	{ "therm_adm1030", adm1030 },
+	{ }
+};
+
 static int
-do_probe( struct i2c_adapter *adapter, int addr, int kind )
+do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 {
-	struct i2c_client *cl;
+	struct i2c_adapter *adapter = cl->adapter;
 
 	if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA
 				     | I2C_FUNC_SMBUS_WRITE_BYTE) )
 		return 0;
 
-	if( !(cl=kzalloc(sizeof(*cl), GFP_KERNEL)) )
-		return -ENOMEM;
-
-	cl->addr = addr;
-	cl->adapter = adapter;
-	cl->driver = &g4fan_driver;
-	cl->flags = 0;
-
-	if( addr < 0x48 )
+	switch (id->driver_data) {
+	case adm1030:
 		return attach_fan( cl );
-	return attach_thermostat( cl );
+	case ds1775:
+		return attach_thermostat(cl);
+	}
+	return 0;
 }
 
+static struct i2c_driver g4fan_driver = {
+	.driver = {
+		.name	= "therm_windtunnel",
+	},
+	.attach_adapter = do_attach,
+	.probe		= do_probe,
+	.remove		= do_remove,
+	.id_table	= therm_windtunnel_id,
+};
+
 
 /************************************************************************/
 /*	initialization / cleanup					*/
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index b92b959fe16..529886c7a82 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -37,34 +37,22 @@
 struct wf_lm75_sensor {
 	int			ds1775 : 1;
 	int			inited : 1;
-	struct 	i2c_client	i2c;
+	struct 	i2c_client	*i2c;
 	struct 	wf_sensor	sens;
 };
 #define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
-#define i2c_to_lm75(c) container_of(c, struct wf_lm75_sensor, i2c)
-
-static int wf_lm75_attach(struct i2c_adapter *adapter);
-static int wf_lm75_detach(struct i2c_client *client);
-
-static struct i2c_driver wf_lm75_driver = {
-	.driver = {
-		.name	= "wf_lm75",
-	},
-	.attach_adapter	= wf_lm75_attach,
-	.detach_client	= wf_lm75_detach,
-};
 
 static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
 {
 	struct wf_lm75_sensor *lm = wf_to_lm75(sr);
 	s32 data;
 
-	if (lm->i2c.adapter == NULL)
+	if (lm->i2c == NULL)
 		return -ENODEV;
 
 	/* Init chip if necessary */
 	if (!lm->inited) {
-		u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(&lm->i2c, 1);
+		u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
 
 		DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
 		    sr->name, cfg);
@@ -73,7 +61,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
 		 * the firmware for now
 		 */
 		cfg_new = cfg & ~0x01;
-		i2c_smbus_write_byte_data(&lm->i2c, 1, cfg_new);
+		i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
 		lm->inited = 1;
 
 		/* If we just powered it up, let's wait 200 ms */
@@ -81,7 +69,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
 	}
 
 	/* Read temperature register */
-	data = (s32)le16_to_cpu(i2c_smbus_read_word_data(&lm->i2c, 0));
+	data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
 	data <<= 8;
 	*value = data;
 
@@ -92,12 +80,6 @@ static void wf_lm75_release(struct wf_sensor *sr)
 {
 	struct wf_lm75_sensor *lm = wf_to_lm75(sr);
 
-	/* check if client is registered and detach from i2c */
-	if (lm->i2c.adapter) {
-		i2c_detach_client(&lm->i2c);
-		lm->i2c.adapter = NULL;
-	}
-
 	kfree(lm);
 }
 
@@ -107,59 +89,77 @@ static struct wf_sensor_ops wf_lm75_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
-					     u8 addr, int ds1775,
-					     const char *loc)
+static int wf_lm75_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
 	struct wf_lm75_sensor *lm;
 	int rc;
 
-	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
-	    ds1775 ? "ds1775" : "lm75", addr);
-
 	lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
 	if (lm == NULL)
-		return NULL;
+		return -ENODEV;
+
+	lm->inited = 0;
+	lm->ds1775 = id->driver_data;
+	lm->i2c = client;
+	lm->sens.name = client->dev.platform_data;
+	lm->sens.ops = &wf_lm75_ops;
+	i2c_set_clientdata(client, lm);
+
+	rc = wf_register_sensor(&lm->sens);
+	if (rc) {
+		i2c_set_clientdata(client, NULL);
+		kfree(lm);
+	}
+
+	return rc;
+}
+
+static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
+					     u8 addr, int ds1775,
+					     const char *loc)
+{
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	char *name;
+
+	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
+	    ds1775 ? "ds1775" : "lm75", addr);
 
 	/* Usual rant about sensor names not beeing very consistent in
 	 * the device-tree, oh well ...
 	 * Add more entries below as you deal with more setups
 	 */
 	if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
-		lm->sens.name = "hd-temp";
+		name = "hd-temp";
 	else if (!strcmp(loc, "Incoming Air Temp"))
-		lm->sens.name = "incoming-air-temp";
+		name = "incoming-air-temp";
 	else if (!strcmp(loc, "ODD Temp"))
-		lm->sens.name = "optical-drive-temp";
+		name = "optical-drive-temp";
 	else if (!strcmp(loc, "HD Temp"))
-		lm->sens.name = "hard-drive-temp";
+		name = "hard-drive-temp";
 	else
 		goto fail;
 
-	lm->inited = 0;
-	lm->sens.ops = &wf_lm75_ops;
-	lm->ds1775 = ds1775;
-	lm->i2c.addr = (addr >> 1) & 0x7f;
-	lm->i2c.adapter = adapter;
-	lm->i2c.driver = &wf_lm75_driver;
-	strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
-
-	rc = i2c_attach_client(&lm->i2c);
-	if (rc) {
-		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
-		       " err %d\n", ds1775 ? "ds1775" : "lm75",
-		       lm->i2c.name, rc);
-		goto fail;
-	}
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = (addr >> 1) & 0x7f;
+	info.platform_data = name;
+	strlcpy(info.type, ds1775 ? "wf_ds1775" : "wf_lm75", I2C_NAME_SIZE);
 
-	if (wf_register_sensor(&lm->sens)) {
-		i2c_detach_client(&lm->i2c);
+	client = i2c_new_device(adapter, &info);
+	if (client == NULL) {
+		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
+		       ds1775 ? "ds1775" : "lm75", name);
 		goto fail;
 	}
 
-	return lm;
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return client;
  fail:
-	kfree(lm);
 	return NULL;
 }
 
@@ -202,21 +202,38 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static int wf_lm75_detach(struct i2c_client *client)
+static int wf_lm75_remove(struct i2c_client *client)
 {
-	struct wf_lm75_sensor *lm = i2c_to_lm75(client);
+	struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
 
 	DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
 
 	/* Mark client detached */
-	lm->i2c.adapter = NULL;
+	lm->i2c = NULL;
 
 	/* release sensor */
 	wf_unregister_sensor(&lm->sens);
 
+	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
+static const struct i2c_device_id wf_lm75_id[] = {
+	{ "wf_lm75", 0 },
+	{ "wf_ds1775", 1 },
+	{ }
+};
+
+static struct i2c_driver wf_lm75_driver = {
+	.driver = {
+		.name	= "wf_lm75",
+	},
+	.attach_adapter	= wf_lm75_attach,
+	.probe		= wf_lm75_probe,
+	.remove		= wf_lm75_remove,
+	.id_table	= wf_lm75_id,
+};
+
 static int __init wf_lm75_sensor_init(void)
 {
 	/* Don't register on old machines that use therm_pm72 for now */
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index e207a90d6b2..e2a55ecda2b 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -26,34 +26,22 @@
 #define MAX6690_EXTERNAL_TEMP	1
 
 struct wf_6690_sensor {
-	struct i2c_client	i2c;
+	struct i2c_client	*i2c;
 	struct wf_sensor	sens;
 };
 
 #define wf_to_6690(x)	container_of((x), struct wf_6690_sensor, sens)
-#define i2c_to_6690(x)	container_of((x), struct wf_6690_sensor, i2c)
-
-static int wf_max6690_attach(struct i2c_adapter *adapter);
-static int wf_max6690_detach(struct i2c_client *client);
-
-static struct i2c_driver wf_max6690_driver = {
-	.driver = {
-		.name		= "wf_max6690",
-	},
-	.attach_adapter	= wf_max6690_attach,
-	.detach_client	= wf_max6690_detach,
-};
 
 static int wf_max6690_get(struct wf_sensor *sr, s32 *value)
 {
 	struct wf_6690_sensor *max = wf_to_6690(sr);
 	s32 data;
 
-	if (max->i2c.adapter == NULL)
+	if (max->i2c == NULL)
 		return -ENODEV;
 
 	/* chip gets initialized by firmware */
-	data = i2c_smbus_read_byte_data(&max->i2c, MAX6690_EXTERNAL_TEMP);
+	data = i2c_smbus_read_byte_data(max->i2c, MAX6690_EXTERNAL_TEMP);
 	if (data < 0)
 		return data;
 	*value = data << 16;
@@ -64,10 +52,6 @@ static void wf_max6690_release(struct wf_sensor *sr)
 {
 	struct wf_6690_sensor *max = wf_to_6690(sr);
 
-	if (max->i2c.adapter) {
-		i2c_detach_client(&max->i2c);
-		max->i2c.adapter = NULL;
-	}
 	kfree(max);
 }
 
@@ -77,19 +61,40 @@ static struct wf_sensor_ops wf_max6690_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr,
-			      const char *loc)
+static int wf_max6690_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
 	struct wf_6690_sensor *max;
-	char *name;
+	int rc;
 
 	max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
 	if (max == NULL) {
-		printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: "
-		       "no memory\n", loc);
-		return;
+		printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor: "
+		       "no memory\n");
+		return -ENOMEM;
+	}
+
+	max->i2c = client;
+	max->sens.name = client->dev.platform_data;
+	max->sens.ops = &wf_max6690_ops;
+	i2c_set_clientdata(client, max);
+
+	rc = wf_register_sensor(&max->sens);
+	if (rc) {
+		i2c_set_clientdata(client, NULL);
+		kfree(max);
 	}
 
+	return rc;
+}
+
+static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
+					    u8 addr, const char *loc)
+{
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	char *name;
+
 	if (!strcmp(loc, "BACKSIDE"))
 		name = "backside-temp";
 	else if (!strcmp(loc, "NB Ambient"))
@@ -99,27 +104,26 @@ static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr,
 	else
 		goto fail;
 
-	max->sens.ops = &wf_max6690_ops;
-	max->sens.name = name;
-	max->i2c.addr = addr >> 1;
-	max->i2c.adapter = adapter;
-	max->i2c.driver = &wf_max6690_driver;
-	strncpy(max->i2c.name, name, I2C_NAME_SIZE-1);
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = addr >> 1;
+	info.platform_data = name;
+	strlcpy(info.type, "wf_max6690", I2C_NAME_SIZE);
 
-	if (i2c_attach_client(&max->i2c)) {
+	client = i2c_new_device(adapter, &info);
+	if (client == NULL) {
 		printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n");
 		goto fail;
 	}
 
-	if (wf_register_sensor(&max->sens)) {
-		i2c_detach_client(&max->i2c);
-		goto fail;
-	}
-
-	return;
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return client;
 
  fail:
-	kfree(max);
+	return NULL;
 }
 
 static int wf_max6690_attach(struct i2c_adapter *adapter)
@@ -154,16 +158,31 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static int wf_max6690_detach(struct i2c_client *client)
+static int wf_max6690_remove(struct i2c_client *client)
 {
-	struct wf_6690_sensor *max = i2c_to_6690(client);
+	struct wf_6690_sensor *max = i2c_get_clientdata(client);
 
-	max->i2c.adapter = NULL;
+	max->i2c = NULL;
 	wf_unregister_sensor(&max->sens);
 
 	return 0;
 }
 
+static const struct i2c_device_id wf_max6690_id[] = {
+	{ "wf_max6690", 0 },
+	{ }
+};
+
+static struct i2c_driver wf_max6690_driver = {
+	.driver = {
+		.name		= "wf_max6690",
+	},
+	.attach_adapter	= wf_max6690_attach,
+	.probe		= wf_max6690_probe,
+	.remove		= wf_max6690_remove,
+	.id_table	= wf_max6690_id,
+};
+
 static int __init wf_max6690_sensor_init(void)
 {
 	/* Don't register on old machines that use therm_pm72 for now */
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 7847e981ac3..5da729e58f9 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -39,7 +39,7 @@ struct wf_sat {
 	struct mutex		mutex;
 	unsigned long		last_read; /* jiffies when cache last updated */
 	u8			cache[16];
-	struct i2c_client	i2c;
+	struct i2c_client	*i2c;
 	struct device_node	*node;
 };
 
@@ -54,18 +54,6 @@ struct wf_sat_sensor {
 };
 
 #define wf_to_sat(c)	container_of(c, struct wf_sat_sensor, sens)
-#define i2c_to_sat(c)	container_of(c, struct wf_sat, i2c)
-
-static int wf_sat_attach(struct i2c_adapter *adapter);
-static int wf_sat_detach(struct i2c_client *client);
-
-static struct i2c_driver wf_sat_driver = {
-	.driver = {
-		.name		= "wf_smu_sat",
-	},
-	.attach_adapter	= wf_sat_attach,
-	.detach_client	= wf_sat_detach,
-};
 
 struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 						  unsigned int *size)
@@ -81,13 +69,13 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 	if (sat_id > 1 || (sat = sats[sat_id]) == NULL)
 		return NULL;
 
-	err = i2c_smbus_write_word_data(&sat->i2c, 8, id << 8);
+	err = i2c_smbus_write_word_data(sat->i2c, 8, id << 8);
 	if (err) {
 		printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err);
 		return NULL;
 	}
 
-	err = i2c_smbus_read_word_data(&sat->i2c, 9);
+	err = i2c_smbus_read_word_data(sat->i2c, 9);
 	if (err < 0) {
 		printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n");
 		return NULL;
@@ -105,7 +93,7 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 		return NULL;
 
 	for (i = 0; i < len; i += 4) {
-		err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0xa, 4, data);
+		err = i2c_smbus_read_i2c_block_data(sat->i2c, 0xa, 4, data);
 		if (err < 0) {
 			printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
 			       err);
@@ -138,7 +126,7 @@ static int wf_sat_read_cache(struct wf_sat *sat)
 {
 	int err;
 
-	err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0x3f, 16, sat->cache);
+	err = i2c_smbus_read_i2c_block_data(sat->i2c, 0x3f, 16, sat->cache);
 	if (err < 0)
 		return err;
 	sat->last_read = jiffies;
@@ -161,7 +149,7 @@ static int wf_sat_get(struct wf_sensor *sr, s32 *value)
 	int i, err;
 	s32 val;
 
-	if (sat->i2c.adapter == NULL)
+	if (sat->i2c == NULL)
 		return -ENODEV;
 
 	mutex_lock(&sat->mutex);
@@ -193,10 +181,6 @@ static void wf_sat_release(struct wf_sensor *sr)
 	struct wf_sat *sat = sens->sat;
 
 	if (atomic_dec_and_test(&sat->refcnt)) {
-		if (sat->i2c.adapter) {
-			i2c_detach_client(&sat->i2c);
-			sat->i2c.adapter = NULL;
-		}
 		if (sat->nr >= 0)
 			sats[sat->nr] = NULL;
 		kfree(sat);
@@ -212,38 +196,58 @@ static struct wf_sensor_ops wf_sat_ops = {
 
 static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
 {
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	const u32 *reg;
+	u8 addr;
+
+	reg = of_get_property(dev, "reg", NULL);
+	if (reg == NULL)
+		return;
+	addr = *reg;
+	DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = (addr >> 1) & 0x7f;
+	info.platform_data = dev;
+	strlcpy(info.type, "wf_sat", I2C_NAME_SIZE);
+
+	client = i2c_new_device(adapter, &info);
+	if (client == NULL) {
+		printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
+		return;
+	}
+
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+}
+
+static int wf_sat_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device_node *dev = client->dev.platform_data;
 	struct wf_sat *sat;
 	struct wf_sat_sensor *sens;
 	const u32 *reg;
 	const char *loc, *type;
-	u8 addr, chip, core;
+	u8 chip, core;
 	struct device_node *child;
 	int shift, cpu, index;
 	char *name;
 	int vsens[2], isens[2];
 
-	reg = of_get_property(dev, "reg", NULL);
-	if (reg == NULL)
-		return;
-	addr = *reg;
-	DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
-
 	sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL);
 	if (sat == NULL)
-		return;
+		return -ENOMEM;
 	sat->nr = -1;
 	sat->node = of_node_get(dev);
 	atomic_set(&sat->refcnt, 0);
 	mutex_init(&sat->mutex);
-	sat->i2c.addr = (addr >> 1) & 0x7f;
-	sat->i2c.adapter = adapter;
-	sat->i2c.driver = &wf_sat_driver;
-	strncpy(sat->i2c.name, "smu-sat", I2C_NAME_SIZE-1);
-
-	if (i2c_attach_client(&sat->i2c)) {
-		printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
-		goto fail;
-	}
+	sat->i2c = client;
+	i2c_set_clientdata(client, sat);
 
 	vsens[0] = vsens[1] = -1;
 	isens[0] = isens[1] = -1;
@@ -344,10 +348,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
 	if (sat->nr >= 0)
 		sats[sat->nr] = sat;
 
-	return;
-
- fail:
-	kfree(sat);
+	return 0;
 }
 
 static int wf_sat_attach(struct i2c_adapter *adapter)
@@ -366,16 +367,32 @@ static int wf_sat_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static int wf_sat_detach(struct i2c_client *client)
+static int wf_sat_remove(struct i2c_client *client)
 {
-	struct wf_sat *sat = i2c_to_sat(client);
+	struct wf_sat *sat = i2c_get_clientdata(client);
 
 	/* XXX TODO */
 
-	sat->i2c.adapter = NULL;
+	sat->i2c = NULL;
+	i2c_set_clientdata(client, NULL);
 	return 0;
 }
 
+static const struct i2c_device_id wf_sat_id[] = {
+	{ "wf_sat", 0 },
+	{ }
+};
+
+static struct i2c_driver wf_sat_driver = {
+	.driver = {
+		.name		= "wf_smu_sat",
+	},
+	.attach_adapter	= wf_sat_attach,
+	.probe		= wf_sat_probe,
+	.remove		= wf_sat_remove,
+	.id_table	= wf_sat_id,
+};
+
 static int __init sat_sensors_init(void)
 {
 	return i2c_add_driver(&wf_sat_driver);
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 823ceba6efa..1128d3fba79 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1513,6 +1513,7 @@ static const struct file_operations _ctl_fops = {
 static struct miscdevice _dm_misc = {
 	.minor 		= MISC_DYNAMIC_MINOR,
 	.name  		= DM_NAME,
+	.devnode	= "mapper/control",
 	.fops  		= &_ctl_fops
 };
 
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 3fd8b1e6548..48db308fae6 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -19,7 +19,6 @@
 #include <linux/slab.h>
 #include <linux/idr.h>
 #include <linux/hdreg.h>
-#include <linux/blktrace_api.h>
 
 #include <trace/events/block.h>
 
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 223c36ede5a..ba69beeb0e2 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -2,8 +2,14 @@
 # Multimedia device configuration
 #
 
-menu "Multimedia devices"
+menuconfig MEDIA_SUPPORT
+	tristate "Multimedia support"
 	depends on HAS_IOMEM
+	help
+	  If you want to use Video for Linux, DVB for Linux, or DAB adapters,
+	  enable this option and other options below.
+
+if MEDIA_SUPPORT
 
 comment "Multimedia core support"
 
@@ -136,4 +142,4 @@ config USB_DABUSB
 	  module will be called dabusb.
 endif # DAB
 
-endmenu
+endif # MEDIA_SUPPORT
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index 78412c9c424..149d54cdf7b 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -416,6 +416,24 @@ static int simple_std_setup(struct dvb_frontend *fe,
 	return 0;
 }
 
+static int simple_set_aux_byte(struct dvb_frontend *fe, u8 config, u8 aux)
+{
+	struct tuner_simple_priv *priv = fe->tuner_priv;
+	int rc;
+	u8 buffer[2];
+
+	buffer[0] = (config & ~0x38) | 0x18;
+	buffer[1] = aux;
+
+	tuner_dbg("setting aux byte: 0x%02x 0x%02x\n", buffer[0], buffer[1]);
+
+	rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2);
+	if (2 != rc)
+		tuner_warn("i2c i/o error: rc == %d (should be 2)\n", rc);
+
+	return rc == 2 ? 0 : rc;
+}
+
 static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
 			    u16 div, u8 config, u8 cb)
 {
@@ -424,17 +442,10 @@ static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
 
 	switch (priv->type) {
 	case TUNER_LG_TDVS_H06XF:
-		/* Set the Auxiliary Byte. */
-		buffer[0] = buffer[2];
-		buffer[0] &= ~0x20;
-		buffer[0] |= 0x18;
-		buffer[1] = 0x20;
-		tuner_dbg("tv 0x%02x 0x%02x\n", buffer[0], buffer[1]);
-
-		rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2);
-		if (2 != rc)
-			tuner_warn("i2c i/o error: rc == %d "
-				   "(should be 2)\n", rc);
+		simple_set_aux_byte(fe, config, 0x20);
+		break;
+	case TUNER_PHILIPS_FQ1216LME_MK3:
+		simple_set_aux_byte(fe, config, 0x60); /* External AGC */
 		break;
 	case TUNER_MICROTUNE_4042FI5:
 	{
@@ -506,6 +517,11 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
 	case TUNER_THOMSON_DTT761X:
 		buffer[3] = 0x39;
 		break;
+	case TUNER_PHILIPS_FQ1216LME_MK3:
+		tuner_err("This tuner doesn't have FM\n");
+		/* Set the low band for sanity, since it covers 88-108 MHz */
+		buffer[3] = 0x01;
+		break;
 	case TUNER_MICROTUNE_4049FM5:
 	default:
 		buffer[3] = 0xa4;
@@ -678,12 +694,12 @@ static int simple_set_radio_freq(struct dvb_frontend *fe,
 		return 0;
 	}
 
-	/* Bandswitch byte */
-	simple_radio_bandswitch(fe, &buffer[0]);
-
 	buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) |
 		    TUNER_RATIO_SELECT_50; /* 50 kHz step */
 
+	/* Bandswitch byte */
+	simple_radio_bandswitch(fe, &buffer[0]);
+
 	/* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
 	   freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
 	   freq * (1/800) */
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index 7c0bc064c00..6a7f1a417c2 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -578,6 +578,31 @@ static struct tuner_params tuner_fm1216me_mk3_params[] = {
 	},
 };
 
+/* ------------ TUNER_PHILIPS_FM1216MK5 - Philips PAL ------------ */
+
+static struct tuner_range tuner_fm1216mk5_pal_ranges[] = {
+	{ 16 * 158.00 /*MHz*/, 0xce, 0x01, },
+	{ 16 * 441.00 /*MHz*/, 0xce, 0x02, },
+	{ 16 * 864.00        , 0xce, 0x04, },
+};
+
+static struct tuner_params tuner_fm1216mk5_params[] = {
+	{
+		.type   = TUNER_PARAM_TYPE_PAL,
+		.ranges = tuner_fm1216mk5_pal_ranges,
+		.count  = ARRAY_SIZE(tuner_fm1216mk5_pal_ranges),
+		.cb_first_if_lower_freq = 1,
+		.has_tda9887 = 1,
+		.port1_active = 1,
+		.port2_active = 1,
+		.port2_invert_for_secam_lc = 1,
+		.port1_fm_high_sensitivity = 1,
+		.default_top_mid = -2,
+		.default_top_secam_mid = -2,
+		.default_top_secam_high = -2,
+	},
+};
+
 /* ------------ TUNER_LG_NTSC_NEW_TAPC - LGINNOTEK NTSC ------------ */
 
 static struct tuner_params tuner_lg_ntsc_new_tapc_params[] = {
@@ -1254,6 +1279,28 @@ static struct tuner_params tuner_tcl_mf02gip_5n_params[] = {
 	},
 };
 
+/* 80-89 */
+/* --------- TUNER_PHILIPS_FQ1216LME_MK3 -- active loopthrough, no FM ------- */
+
+static struct tuner_params tuner_fq1216lme_mk3_params[] = {
+	{
+		.type   = TUNER_PARAM_TYPE_PAL,
+		.ranges = tuner_fm1216me_mk3_pal_ranges,
+		.count  = ARRAY_SIZE(tuner_fm1216me_mk3_pal_ranges),
+		.cb_first_if_lower_freq = 1, /* not specified, but safe to do */
+		.has_tda9887 = 1, /* TDA9886 */
+		.port1_active = 1,
+		.port2_active = 1,
+		.port2_invert_for_secam_lc = 1,
+		.default_top_low = 4,
+		.default_top_mid = 4,
+		.default_top_high = 4,
+		.default_top_secam_low = 4,
+		.default_top_secam_mid = 4,
+		.default_top_secam_high = 4,
+	},
+};
+
 /* --------------------------------------------------------------------- */
 
 struct tunertype tuners[] = {
@@ -1694,6 +1741,18 @@ struct tunertype tuners[] = {
 		.initdata = tua603x_agc112,
 		.sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 },
 	},
+		[TUNER_PHILIPS_FM1216MK5] = { /* Philips PAL */
+		.name   = "Philips PAL/SECAM multi (FM1216 MK5)",
+		.params = tuner_fm1216mk5_params,
+		.count  = ARRAY_SIZE(tuner_fm1216mk5_params),
+	},
+
+	/* 80-89 */
+	[TUNER_PHILIPS_FQ1216LME_MK3] = { /* PAL/SECAM, Loop-thru, no FM */
+		.name = "Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough",
+		.params = tuner_fq1216lme_mk3_params,
+		.count  = ARRAY_SIZE(tuner_fq1216lme_mk3_params),
+	},
 };
 EXPORT_SYMBOL(tuners);
 
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index 1adce9ff52c..b6da9c3873f 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -30,7 +30,7 @@ MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
 static int no_poweroff;
 module_param(no_poweroff, int, 0644);
-MODULE_PARM_DESC(debug, "0 (default) powers device off when not used.\n"
+MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n"
 	"1 keep device energized and with tuner ready all the times.\n"
 	"  Faster, but consumes more power and keeps the device hotter\n");
 
@@ -48,7 +48,7 @@ MODULE_PARM_DESC(audio_std,
 	"NICAM/A\n"
 	"NICAM/B\n");
 
-static char firmware_name[FIRMWARE_NAME_MAX];
+static char firmware_name[30];
 module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0);
 MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
 				"default firmware name\n");
@@ -272,7 +272,7 @@ static int load_all_firmwares(struct dvb_frontend *fe)
 		fname = firmware_name;
 
 	tuner_dbg("Reading firmware %s\n", fname);
-	rc = request_firmware(&fw, fname, &priv->i2c_props.adap->dev);
+	rc = request_firmware(&fw, fname, priv->i2c_props.adap->dev.parent);
 	if (rc < 0) {
 		if (rc == -ENOENT)
 			tuner_err("Error: firmware %s not found.\n",
@@ -917,22 +917,29 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
 	 * that xc2028 will be in a safe state.
 	 * Maybe this might also be needed for DTV.
 	 */
-	if (new_mode == T_ANALOG_TV) {
+	if (new_mode == T_ANALOG_TV)
 		rc = send_seq(priv, {0x00, 0x00});
-	} else if (priv->cur_fw.type & ATSC) {
-		offset = 1750000;
-	} else {
-		offset = 2750000;
+
+	/*
+	 * Digital modes require an offset to adjust to the
+	 * proper frequency.
+	 * Analog modes require offset = 0
+	 */
+	if (new_mode == T_DIGITAL_TV) {
+		/* Sets the offset according with firmware */
+		if (priv->cur_fw.type & DTV6)
+			offset = 1750000;
+		else if (priv->cur_fw.type & DTV7)
+			offset = 2250000;
+		else	/* DTV8 or DTV78 */
+			offset = 2750000;
+
 		/*
-		 * We must adjust the offset by 500kHz in two cases in order
-		 * to correctly center the IF output:
-		 * 1) When the ZARLINK456 or DIBCOM52 tables were explicitly
-		 *    selected and a 7MHz channel is tuned;
-		 * 2) When tuning a VHF channel with DTV78 firmware.
+		 * We must adjust the offset by 500kHz  when
+		 * tuning a 7MHz VHF channel with DTV78 firmware
+		 * (used in Australia, Italy and Germany)
 		 */
-		if (((priv->cur_fw.type & DTV7) &&
-		     (priv->cur_fw.scode_table & (ZARLINK456 | DIBCOM52))) ||
-		    ((priv->cur_fw.type & DTV78) && freq < 470000000))
+		if ((priv->cur_fw.type & DTV78) && freq < 470000000)
 			offset -= 500000;
 	}
 
@@ -991,7 +998,7 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe,
 		if (priv->ctrl.input1)
 			type |= INPUT1;
 		return generic_set_freq(fe, (625l * p->frequency) / 10,
-				T_ANALOG_TV, type, 0, 0);
+				T_RADIO, type, 0, 0);
 	}
 
 	/* if std is not defined, choose one */
@@ -1022,21 +1029,20 @@ static int xc2028_set_params(struct dvb_frontend *fe,
 	switch(fe->ops.info.type) {
 	case FE_OFDM:
 		bw = p->u.ofdm.bandwidth;
-		break;
-	case FE_QAM:
-		tuner_info("WARN: There are some reports that "
-			   "QAM 6 MHz doesn't work.\n"
-			   "If this works for you, please report by "
-			   "e-mail to: v4l-dvb-maintainer@linuxtv.org\n");
-		bw = BANDWIDTH_6_MHZ;
-		type |= QAM;
+		/*
+		 * The only countries with 6MHz seem to be Taiwan/Uruguay.
+		 * Both seem to require QAM firmware for OFDM decoding
+		 * Tested in Taiwan by Terry Wu <terrywu2009@gmail.com>
+		 */
+		if (bw == BANDWIDTH_6_MHZ)
+			type |= QAM;
 		break;
 	case FE_ATSC:
 		bw = BANDWIDTH_6_MHZ;
 		/* The only ATSC firmware (at least on v2.7) is D2633 */
 		type |= ATSC | D2633;
 		break;
-	/* DVB-S is not supported */
+	/* DVB-S and pure QAM (FE_QAM) are not supported */
 	default:
 		return -EINVAL;
 	}
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index b54598550dc..f4ffcdc9b84 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (c) 2007 Xceive Corporation
  *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ *  Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -36,14 +37,20 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 
+static int no_poweroff;
+module_param(no_poweroff, int, 0644);
+MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n"
+	"\t\t1 keep device energized and with tuner ready all the times.\n"
+	"\t\tFaster, but consumes more power and keeps the device hotter");
+
 static DEFINE_MUTEX(xc5000_list_mutex);
 static LIST_HEAD(hybrid_tuner_instance_list);
 
 #define dprintk(level, fmt, arg...) if (debug >= level) \
 	printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
 
-#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw"
-#define XC5000_DEFAULT_FIRMWARE_SIZE 12332
+#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.6.114.fw"
+#define XC5000_DEFAULT_FIRMWARE_SIZE 12401
 
 struct xc5000_priv {
 	struct tuner_i2c_props i2c_props;
@@ -83,11 +90,11 @@ struct xc5000_priv {
 #define XREG_D_CODE       0x04
 #define XREG_IF_OUT       0x05
 #define XREG_SEEK_MODE    0x07
-#define XREG_POWER_DOWN   0x0A
+#define XREG_POWER_DOWN   0x0A /* Obsolete */
 #define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */
 #define XREG_SMOOTHEDCVBS 0x0E
 #define XREG_XTALFREQ     0x0F
-#define XREG_FINERFFREQ   0x10
+#define XREG_FINERFREQ    0x10
 #define XREG_DDIMODE      0x11
 
 #define XREG_ADC_ENV      0x00
@@ -100,6 +107,7 @@ struct xc5000_priv {
 #define XREG_VERSION      0x07
 #define XREG_PRODUCT_ID   0x08
 #define XREG_BUSY         0x09
+#define XREG_BUILD        0x0D
 
 /*
    Basic firmware description. This will remain with
@@ -191,27 +199,36 @@ static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
 	{"FM Radio-INPUT1",   0x0208, 0x9002}
 };
 
-static int  xc5000_is_firmware_loaded(struct dvb_frontend *fe);
-static int  xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
-static int  xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
-static void xc5000_TunerReset(struct dvb_frontend *fe);
+static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe);
+static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val);
+static int xc5000_TunerReset(struct dvb_frontend *fe);
 
 static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 {
-	return xc5000_writeregs(priv, buf, len)
-		? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS;
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
+			       .flags = 0, .buf = buf, .len = len };
+
+	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
+		printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len);
+		return XC_RESULT_I2C_WRITE_FAILURE;
+	}
+	return XC_RESULT_SUCCESS;
 }
 
+/* This routine is never used because the only time we read data from the
+   i2c bus is when we read registers, and we want that to be an atomic i2c
+   transaction in case we are on a multi-master bus */
 static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 {
-	return xc5000_readregs(priv, buf, len)
-		? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS;
-}
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
+		.flags = I2C_M_RD, .buf = buf, .len = len };
 
-static int xc_reset(struct dvb_frontend *fe)
-{
-	xc5000_TunerReset(fe);
-	return XC_RESULT_SUCCESS;
+	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
+		printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len);
+		return -EREMOTEIO;
+	}
+	return 0;
 }
 
 static void xc_wait(int wait_ms)
@@ -219,7 +236,7 @@ static void xc_wait(int wait_ms)
 	msleep(wait_ms);
 }
 
-static void xc5000_TunerReset(struct dvb_frontend *fe)
+static int xc5000_TunerReset(struct dvb_frontend *fe)
 {
 	struct xc5000_priv *priv = fe->tuner_priv;
 	int ret;
@@ -232,16 +249,21 @@ static void xc5000_TunerReset(struct dvb_frontend *fe)
 					   priv->i2c_props.adap->algo_data,
 					   DVB_FRONTEND_COMPONENT_TUNER,
 					   XC5000_TUNER_RESET, 0);
-		if (ret)
+		if (ret) {
 			printk(KERN_ERR "xc5000: reset failed\n");
-	} else
+			return XC_RESULT_RESET_FAILURE;
+		}
+	} else {
 		printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
+		return XC_RESULT_RESET_FAILURE;
+	}
+	return XC_RESULT_SUCCESS;
 }
 
 static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
 {
 	u8 buf[4];
-	int WatchDogTimer = 5;
+	int WatchDogTimer = 100;
 	int result;
 
 	buf[0] = (regAddr >> 8) & 0xFF;
@@ -263,7 +285,7 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
 						/* busy flag cleared */
 					break;
 					} else {
-						xc_wait(100); /* wait 5 ms */
+						xc_wait(5); /* wait 5 ms */
 						WatchDogTimer--;
 					}
 				}
@@ -276,25 +298,6 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
 	return result;
 }
 
-static int xc_read_reg(struct xc5000_priv *priv, u16 regAddr, u16 *i2cData)
-{
-	u8 buf[2];
-	int result;
-
-	buf[0] = (regAddr >> 8) & 0xFF;
-	buf[1] = regAddr & 0xFF;
-	result = xc_send_i2c_data(priv, buf, 2);
-	if (result != XC_RESULT_SUCCESS)
-		return result;
-
-	result = xc_read_i2c_data(priv, buf, 2);
-	if (result != XC_RESULT_SUCCESS)
-		return result;
-
-	*i2cData = buf[0] * 256 + buf[1];
-	return result;
-}
-
 static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
 {
 	struct xc5000_priv *priv = fe->tuner_priv;
@@ -309,7 +312,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
 		len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
 		if (len == 0x0000) {
 			/* RESET command */
-			result = xc_reset(fe);
+			result = xc5000_TunerReset(fe);
 			index += 2;
 			if (result != XC_RESULT_SUCCESS)
 				return result;
@@ -371,15 +374,6 @@ static int xc_SetTVStandard(struct xc5000_priv *priv,
 	return ret;
 }
 
-static int xc_shutdown(struct xc5000_priv *priv)
-{
-	return XC_RESULT_SUCCESS;
-	/* Fixme: cannot bring tuner back alive once shutdown
-	 *        without reloading the driver modules.
-	 *    return xc_write_reg(priv, XREG_POWER_DOWN, 0);
-	 */
-}
-
 static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode)
 {
 	dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
@@ -408,7 +402,10 @@ static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz)
 
 	freq_code = (u16)(freq_hz / 15625);
 
-	return xc_write_reg(priv, XREG_RF_FREQ, freq_code);
+	/* Starting in firmware version 1.1.44, Xceive recommends using the
+	   FINERFREQ for all normal tuning (the doc indicates reg 0x03 should
+	   only be used for fast scanning for channel lock) */
+	return xc_write_reg(priv, XREG_FINERFREQ, freq_code);
 }
 
 
@@ -424,7 +421,7 @@ static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
 
 static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope)
 {
-	return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope);
+	return xc5000_readreg(priv, XREG_ADC_ENV, adc_envelope);
 }
 
 static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
@@ -433,8 +430,8 @@ static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
 	u16 regData;
 	u32 tmp;
 
-	result = xc_read_reg(priv, XREG_FREQ_ERROR, &regData);
-	if (result)
+	result = xc5000_readreg(priv, XREG_FREQ_ERROR, &regData);
+	if (result != XC_RESULT_SUCCESS)
 		return result;
 
 	tmp = (u32)regData;
@@ -444,7 +441,7 @@ static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
 
 static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
 {
-	return xc_read_reg(priv, XREG_LOCK, lock_status);
+	return xc5000_readreg(priv, XREG_LOCK, lock_status);
 }
 
 static int xc_get_version(struct xc5000_priv *priv,
@@ -454,8 +451,8 @@ static int xc_get_version(struct xc5000_priv *priv,
 	u16 data;
 	int result;
 
-	result = xc_read_reg(priv, XREG_VERSION, &data);
-	if (result)
+	result = xc5000_readreg(priv, XREG_VERSION, &data);
+	if (result != XC_RESULT_SUCCESS)
 		return result;
 
 	(*hw_majorversion) = (data >> 12) & 0x0F;
@@ -466,13 +463,18 @@ static int xc_get_version(struct xc5000_priv *priv,
 	return 0;
 }
 
+static int xc_get_buildversion(struct xc5000_priv *priv, u16 *buildrev)
+{
+	return xc5000_readreg(priv, XREG_BUILD, buildrev);
+}
+
 static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
 {
 	u16 regData;
 	int result;
 
-	result = xc_read_reg(priv, XREG_HSYNC_FREQ, &regData);
-	if (result)
+	result = xc5000_readreg(priv, XREG_HSYNC_FREQ, &regData);
+	if (result != XC_RESULT_SUCCESS)
 		return result;
 
 	(*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
@@ -481,12 +483,12 @@ static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
 
 static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
 {
-	return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines);
+	return xc5000_readreg(priv, XREG_FRAME_LINES, frame_lines);
 }
 
 static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
 {
-	return xc_read_reg(priv, XREG_QUALITY, quality);
+	return xc5000_readreg(priv, XREG_QUALITY, quality);
 }
 
 static u16 WaitForLock(struct xc5000_priv *priv)
@@ -504,7 +506,9 @@ static u16 WaitForLock(struct xc5000_priv *priv)
 	return lockState;
 }
 
-static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz)
+#define XC_TUNE_ANALOG  0
+#define XC_TUNE_DIGITAL 1
+static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
 {
 	int found = 0;
 
@@ -513,8 +517,10 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz)
 	if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS)
 		return 0;
 
-	if (WaitForLock(priv) == 1)
-		found = 1;
+	if (mode == XC_TUNE_ANALOG) {
+		if (WaitForLock(priv) == 1)
+			found = 1;
+	}
 
 	return found;
 }
@@ -536,32 +542,7 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
 	}
 
 	*val = (bval[0] << 8) | bval[1];
-	return 0;
-}
-
-static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len)
-{
-	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
-		.flags = 0, .buf = buf, .len = len };
-
-	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
-		printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n",
-			(int)len);
-		return -EREMOTEIO;
-	}
-	return 0;
-}
-
-static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len)
-{
-	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
-		.flags = I2C_M_RD, .buf = buf, .len = len };
-
-	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
-		printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", (int)len);
-		return -EREMOTEIO;
-	}
-	return 0;
+	return XC_RESULT_SUCCESS;
 }
 
 static int xc5000_fwupload(struct dvb_frontend *fe)
@@ -575,13 +556,13 @@ static int xc5000_fwupload(struct dvb_frontend *fe)
 		XC5000_DEFAULT_FIRMWARE);
 
 	ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE,
-		&priv->i2c_props.adap->dev);
+		priv->i2c_props.adap->dev.parent);
 	if (ret) {
 		printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
 		ret = XC_RESULT_RESET_FAILURE;
 		goto out;
 	} else {
-		printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n",
+		printk(KERN_DEBUG "xc5000: firmware read %Zu bytes.\n",
 		       fw->size);
 		ret = XC_RESULT_SUCCESS;
 	}
@@ -590,8 +571,9 @@ static int xc5000_fwupload(struct dvb_frontend *fe)
 		printk(KERN_ERR "xc5000: firmware incorrect size\n");
 		ret = XC_RESULT_RESET_FAILURE;
 	} else {
-		printk(KERN_INFO "xc5000: firmware upload\n");
+		printk(KERN_INFO "xc5000: firmware uploading...\n");
 		ret = xc_load_i2c_sequence(fe,  fw->data);
+		printk(KERN_INFO "xc5000: firmware upload complete...\n");
 	}
 
 out:
@@ -609,6 +591,7 @@ static void xc_debug_dump(struct xc5000_priv *priv)
 	u16 quality;
 	u8 hw_majorversion = 0, hw_minorversion = 0;
 	u8 fw_majorversion = 0, fw_minorversion = 0;
+	u16 fw_buildversion = 0;
 
 	/* Wait for stats to stabilize.
 	 * Frame Lines needs two frame times after initial lock
@@ -628,9 +611,10 @@ static void xc_debug_dump(struct xc5000_priv *priv)
 
 	xc_get_version(priv,  &hw_majorversion, &hw_minorversion,
 		&fw_majorversion, &fw_minorversion);
-	dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n",
+	xc_get_buildversion(priv,  &fw_buildversion);
+	dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x.%04x\n",
 		hw_majorversion, hw_minorversion,
-		fw_majorversion, fw_minorversion);
+		fw_majorversion, fw_minorversion, fw_buildversion);
 
 	xc_get_hsync_freq(priv,  &hsync_freq_hz);
 	dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
@@ -648,27 +632,57 @@ static int xc5000_set_params(struct dvb_frontend *fe,
 	struct xc5000_priv *priv = fe->tuner_priv;
 	int ret;
 
+	if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
+		xc_load_fw_and_init_tuner(fe);
+
 	dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
 
-	switch (params->u.vsb.modulation) {
-	case VSB_8:
-	case VSB_16:
-		dprintk(1, "%s() VSB modulation\n", __func__);
+	if (fe->ops.info.type == FE_ATSC) {
+		dprintk(1, "%s() ATSC\n", __func__);
+		switch (params->u.vsb.modulation) {
+		case VSB_8:
+		case VSB_16:
+			dprintk(1, "%s() VSB modulation\n", __func__);
+			priv->rf_mode = XC_RF_MODE_AIR;
+			priv->freq_hz = params->frequency - 1750000;
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = DTV6;
+			break;
+		case QAM_64:
+		case QAM_256:
+		case QAM_AUTO:
+			dprintk(1, "%s() QAM modulation\n", __func__);
+			priv->rf_mode = XC_RF_MODE_CABLE;
+			priv->freq_hz = params->frequency - 1750000;
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = DTV6;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else if (fe->ops.info.type == FE_OFDM) {
+		dprintk(1, "%s() OFDM\n", __func__);
+		switch (params->u.ofdm.bandwidth) {
+		case BANDWIDTH_6_MHZ:
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = DTV6;
+			priv->freq_hz = params->frequency - 1750000;
+			break;
+		case BANDWIDTH_7_MHZ:
+			printk(KERN_ERR "xc5000 bandwidth 7MHz not supported\n");
+			return -EINVAL;
+		case BANDWIDTH_8_MHZ:
+			priv->bandwidth = BANDWIDTH_8_MHZ;
+			priv->video_standard = DTV8;
+			priv->freq_hz = params->frequency - 2750000;
+			break;
+		default:
+			printk(KERN_ERR "xc5000 bandwidth not set!\n");
+			return -EINVAL;
+		}
 		priv->rf_mode = XC_RF_MODE_AIR;
-		priv->freq_hz = params->frequency - 1750000;
-		priv->bandwidth = BANDWIDTH_6_MHZ;
-		priv->video_standard = DTV6;
-		break;
-	case QAM_64:
-	case QAM_256:
-	case QAM_AUTO:
-		dprintk(1, "%s() QAM modulation\n", __func__);
-		priv->rf_mode = XC_RF_MODE_CABLE;
-		priv->freq_hz = params->frequency - 1750000;
-		priv->bandwidth = BANDWIDTH_6_MHZ;
-		priv->video_standard = DTV6;
-		break;
-	default:
+	} else {
+		printk(KERN_ERR "xc5000 modulation type not supported!\n");
 		return -EINVAL;
 	}
 
@@ -698,7 +712,7 @@ static int xc5000_set_params(struct dvb_frontend *fe,
 		return -EIO;
 	}
 
-	xc_tune_channel(priv, priv->freq_hz);
+	xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL);
 
 	if (debug)
 		xc_debug_dump(priv);
@@ -725,8 +739,6 @@ static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
 	return ret;
 }
 
-static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
-
 static int xc5000_set_analog_params(struct dvb_frontend *fe,
 	struct analog_parameters *params)
 {
@@ -807,7 +819,7 @@ tune_channel:
 		return -EREMOTEIO;
 	}
 
-	xc_tune_channel(priv, priv->freq_hz);
+	xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
 
 	if (debug)
 		xc_debug_dump(priv);
@@ -875,18 +887,18 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
 
 static int xc5000_sleep(struct dvb_frontend *fe)
 {
-	struct xc5000_priv *priv = fe->tuner_priv;
 	int ret;
 
 	dprintk(1, "%s()\n", __func__);
 
-	/* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized
-	 * once shutdown without reloading the driver. Maybe I am not
-	 * doing something right.
-	 *
-	 */
+	/* Avoid firmware reload on slow devices */
+	if (no_poweroff)
+		return 0;
 
-	ret = xc_shutdown(priv);
+	/* According to Xceive technical support, the "powerdown" register
+	   was removed in newer versions of the firmware.  The "supported"
+	   way to sleep the tuner is to pull the reset pin low for 10ms */
+	ret = xc5000_TunerReset(fe);
 	if (ret != XC_RESULT_SUCCESS) {
 		printk(KERN_ERR
 			"xc5000: %s() unable to shutdown tuner\n",
@@ -991,7 +1003,7 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 	/* Check if firmware has been loaded. It is possible that another
 	   instance of the driver has loaded the firmware.
 	 */
-	if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
+	if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != XC_RESULT_SUCCESS)
 		goto fail;
 
 	switch (id) {
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index 3e1c472092a..9e2148a1996 100644
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -1,9 +1,7 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-common.h - common header file for device-specific source files also.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-common.h - common header file for device-specific source files
+ * see flexcop.c for copyright information
  */
 #ifndef __FLEXCOP_COMMON_H__
 #define __FLEXCOP_COMMON_H__
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index f7afab5944c..efb4a6c2b57 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -1,34 +1,27 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling
+ * see flexcop.c for copyright information
  */
 #include <media/tuner.h>
-
 #include "flexcop.h"
-
-#include "stv0299.h"
-#include "mt352.h"
-#include "nxt200x.h"
-#include "bcm3510.h"
-#include "stv0297.h"
 #include "mt312.h"
-#include "lgdt330x.h"
-#include "dvb-pll.h"
-#include "tuner-simple.h"
-
+#include "stv0299.h"
 #include "s5h1420.h"
 #include "itd1000.h"
-
-#include "cx24123.h"
 #include "cx24113.h"
-
+#include "cx24123.h"
 #include "isl6421.h"
+#include "mt352.h"
+#include "bcm3510.h"
+#include "nxt200x.h"
+#include "dvb-pll.h"
+#include "lgdt330x.h"
+#include "tuner-simple.h"
+#include "stv0297.h"
 
 /* lnb control */
-
+#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -37,65 +30,62 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 
 	v = fc->read_ibi_reg(fc, misc_204);
 	switch (voltage) {
-		case SEC_VOLTAGE_OFF:
-			v.misc_204.ACPI1_sig = 1;
-			break;
-		case SEC_VOLTAGE_13:
-			v.misc_204.ACPI1_sig = 0;
-			v.misc_204.LNB_L_H_sig = 0;
-			break;
-		case SEC_VOLTAGE_18:
-			v.misc_204.ACPI1_sig = 0;
-			v.misc_204.LNB_L_H_sig = 1;
-			break;
-		default:
-			err("unknown SEC_VOLTAGE value");
-			return -EINVAL;
+	case SEC_VOLTAGE_OFF:
+		v.misc_204.ACPI1_sig = 1;
+		break;
+	case SEC_VOLTAGE_13:
+		v.misc_204.ACPI1_sig = 0;
+		v.misc_204.LNB_L_H_sig = 0;
+		break;
+	case SEC_VOLTAGE_18:
+		v.misc_204.ACPI1_sig = 0;
+		v.misc_204.LNB_L_H_sig = 1;
+		break;
+	default:
+		err("unknown SEC_VOLTAGE value");
+		return -EINVAL;
 	}
 	return fc->write_ibi_reg(fc, misc_204, v);
 }
+#endif
 
+#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
+	|| defined(CONFIG_DVB_MT312_MODULE)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
-/*	flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
-
 	if (fc->fe_sleep)
 		return fc->fe_sleep(fe);
-
-/*	v.misc_204.ACPI3_sig = 1;
-	fc->write_ibi_reg(fc,misc_204,v);*/
-
 	return 0;
 }
+#endif
 
+/* SkyStar2 DVB-S rev 2.3 */
+#if defined(CONFIG_DVB_MT312_MODULE)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
-	/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
+/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
 	struct flexcop_device *fc = fe->dvb->priv;
 	flexcop_ibi_value v;
 	u16 ax;
 	v.raw = 0;
-
 	deb_tuner("tone = %u\n",tone);
 
 	switch (tone) {
-		case SEC_TONE_ON:
-			ax = 0x01ff;
-			break;
-		case SEC_TONE_OFF:
-			ax = 0;
-			break;
-		default:
-			err("unknown SEC_TONE value");
-			return -EINVAL;
+	case SEC_TONE_ON:
+		ax = 0x01ff;
+		break;
+	case SEC_TONE_OFF:
+		ax = 0;
+		break;
+	default:
+		err("unknown SEC_TONE value");
+		return -EINVAL;
 	}
 
 	v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
-
 	v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
 	v.lnb_switch_freq_200.LNB_CTLLowCount_sig  = ax == 0 ? 0x1ff : ax;
-
 	return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
 }
 
@@ -110,17 +100,16 @@ static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
 static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
 {
 	int i, par = 1, d;
-
 	for (i = 7; i >= 0; i--) {
 		d = (data >> i) & 1;
 		par ^= d;
 		flexcop_diseqc_send_bit(fe, d);
 	}
-
 	flexcop_diseqc_send_bit(fe, par);
 }
 
-static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
+static int flexcop_send_diseqc_msg(struct dvb_frontend *fe,
+	int len, u8 *msg, unsigned long burst)
 {
 	int i;
 
@@ -129,7 +118,6 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un
 
 	for (i = 0; i < len; i++)
 		flexcop_diseqc_send_byte(fe,msg[i]);
-
 	mdelay(16);
 
 	if (burst != -1) {
@@ -146,50 +134,110 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un
 	return 0;
 }
 
-static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe,
+	struct dvb_diseqc_master_cmd *cmd)
 {
 	return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
 }
 
-static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+static int flexcop_diseqc_send_burst(struct dvb_frontend *fe,
+	fe_sec_mini_cmd_t minicmd)
 {
 	return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
 }
 
-/* dvb-s stv0299 */
-static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+	.demod_address = 0x0e,
+};
+
+static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
+{
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf,
+	.len = sizeof(buf) };
+	struct flexcop_device *fc = fe->dvb->priv;
+	div = (params->frequency + (125/2)) / 125;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = (div >> 0) & 0xff;
+	buf[2] = 0x84 | ((div >> 10) & 0x60);
+	buf[3] = 0x80;
+
+	if (params->frequency < 1550000)
+		buf[3] |= 0x02;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static int skystar2_rev23_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
+	if (fc->fe != NULL) {
+		struct dvb_frontend_ops *ops = &fc->fe->ops;
+		ops->tuner_ops.set_params   =
+			skystar23_samsung_tbdu18132_tuner_set_params;
+		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
+		ops->set_tone               = flexcop_set_tone;
+		ops->set_voltage            = flexcop_set_voltage;
+		fc->fe_sleep                = ops->sleep;
+		ops->sleep                  = flexcop_sleep;
+		return 1;
+	}
+	return 0;
+}
+#endif
+
+/* SkyStar2 DVB-S rev 2.6 */
+#if defined(CONFIG_DVB_STV0299_MODULE)
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
+	u32 srate, u32 ratio)
 {
 	u8 aclk = 0;
 	u8 bclk = 0;
 
-	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
-	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
-	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
-	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
-	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
-	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
-	stv0299_writereg (fe, 0x13, aclk);
-	stv0299_writereg (fe, 0x14, bclk);
-	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
-	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
+	if (srate < 1500000) {
+		aclk = 0xb7; bclk = 0x47;
+	} else if (srate < 3000000) {
+		aclk = 0xb7; bclk = 0x4b;
+	} else if (srate < 7000000) {
+		aclk = 0xb7; bclk = 0x4f;
+	} else if (srate < 14000000) {
+		aclk = 0xb7; bclk = 0x53;
+	} else if (srate < 30000000) {
+		aclk = 0xb6; bclk = 0x53;
+	} else if (srate < 45000000) {
+		aclk = 0xb4; bclk = 0x51;
+	}
 
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg(fe, 0x21,  ratio        & 0xf0);
 	return 0;
 }
 
-static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
+static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
 {
 	u8 buf[4];
 	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	struct i2c_msg msg = {
+	.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
 	struct flexcop_device *fc = fe->dvb->priv;
-
 	div = params->frequency / 125;
 
 	buf[0] = (div >> 8) & 0x7f;
 	buf[1] = div & 0xff;
-	buf[2] = 0x84;  /* 0xC4 */
+	buf[2] = 0x84; /* 0xC4 */
 	buf[3] = 0x08;
 
 	if (params->frequency < 1500000)
@@ -203,48 +251,48 @@ static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dv
 }
 
 static u8 samsung_tbmu24112_inittab[] = {
-	     0x01, 0x15,
-	     0x02, 0x30,
-	     0x03, 0x00,
-	     0x04, 0x7D,
-	     0x05, 0x35,
-	     0x06, 0x02,
-	     0x07, 0x00,
-	     0x08, 0xC3,
-	     0x0C, 0x00,
-	     0x0D, 0x81,
-	     0x0E, 0x23,
-	     0x0F, 0x12,
-	     0x10, 0x7E,
-	     0x11, 0x84,
-	     0x12, 0xB9,
-	     0x13, 0x88,
-	     0x14, 0x89,
-	     0x15, 0xC9,
-	     0x16, 0x00,
-	     0x17, 0x5C,
-	     0x18, 0x00,
-	     0x19, 0x00,
-	     0x1A, 0x00,
-	     0x1C, 0x00,
-	     0x1D, 0x00,
-	     0x1E, 0x00,
-	     0x1F, 0x3A,
-	     0x20, 0x2E,
-	     0x21, 0x80,
-	     0x22, 0xFF,
-	     0x23, 0xC1,
-	     0x28, 0x00,
-	     0x29, 0x1E,
-	     0x2A, 0x14,
-	     0x2B, 0x0F,
-	     0x2C, 0x09,
-	     0x2D, 0x05,
-	     0x31, 0x1F,
-	     0x32, 0x19,
-	     0x33, 0xFE,
-	     0x34, 0x93,
-	     0xff, 0xff,
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7D,
+	0x05, 0x35,
+	0x06, 0x02,
+	0x07, 0x00,
+	0x08, 0xC3,
+	0x0C, 0x00,
+	0x0D, 0x81,
+	0x0E, 0x23,
+	0x0F, 0x12,
+	0x10, 0x7E,
+	0x11, 0x84,
+	0x12, 0xB9,
+	0x13, 0x88,
+	0x14, 0x89,
+	0x15, 0xC9,
+	0x16, 0x00,
+	0x17, 0x5C,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1A, 0x00,
+	0x1C, 0x00,
+	0x1D, 0x00,
+	0x1E, 0x00,
+	0x1F, 0x3A,
+	0x20, 0x2E,
+	0x21, 0x80,
+	0x22, 0xFF,
+	0x23, 0xC1,
+	0x28, 0x00,
+	0x29, 0x1E,
+	0x2A, 0x14,
+	0x2B, 0x0F,
+	0x2C, 0x09,
+	0x2D, 0x05,
+	0x31, 0x1F,
+	0x32, 0x19,
+	0x33, 0xFE,
+	0x34, 0x93,
+	0xff, 0xff,
 };
 
 static struct stv0299_config samsung_tbmu24112_config = {
@@ -259,27 +307,155 @@ static struct stv0299_config samsung_tbmu24112_config = {
 	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
 };
 
-/* dvb-t mt352 */
-static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+static int skystar2_rev26_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
+	if (fc->fe != NULL) {
+		struct dvb_frontend_ops *ops  = &fc->fe->ops;
+		ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
+		ops->set_voltage = flexcop_set_voltage;
+		fc->fe_sleep = ops->sleep;
+		ops->sleep = flexcop_sleep;
+		return 1;
+	}
+	return 0;
+}
+#endif
+
+/* SkyStar2 DVB-S rev 2.7 */
+#if defined(CONFIG_DVB_S5H1420_MODULE)
+static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
+	.demod_address = 0x53,
+	.invert = 1,
+	.repeated_start_workaround = 1,
+	.serial_mpeg = 1,
+};
+
+static struct itd1000_config skystar2_rev2_7_itd1000_config = {
+	.i2c_address = 0x61,
+};
+
+static int skystar2_rev27_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	flexcop_ibi_value r108;
+	struct i2c_adapter *i2c_tuner;
+
+	/* enable no_base_addr - no repeated start when reading */
+	fc->fc_i2c_adap[0].no_base_addr = 1;
+	fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config,
+			    i2c);
+	if (!fc->fe)
+		goto fail;
+
+	i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
+	if (!i2c_tuner)
+		goto fail;
+
+	fc->fe_sleep = fc->fe->ops.sleep;
+	fc->fe->ops.sleep = flexcop_sleep;
+
+	/* enable no_base_addr - no repeated start when reading */
+	fc->fc_i2c_adap[2].no_base_addr = 1;
+	if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
+			0x08, 1, 1)) {
+		err("ISL6421 could NOT be attached");
+		goto fail_isl;
+	}
+	info("ISL6421 successfully attached");
+
+	/* the ITD1000 requires a lower i2c clock - is it a problem ? */
+	r108.raw = 0x00000506;
+	fc->write_ibi_reg(fc, tw_sm_c_108, r108);
+	if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
+			&skystar2_rev2_7_itd1000_config)) {
+		err("ITD1000 could NOT be attached");
+		/* Should i2c clock be restored? */
+		goto fail_isl;
+	}
+	info("ITD1000 successfully attached");
+
+	return 1;
+
+fail_isl:
+	fc->fc_i2c_adap[2].no_base_addr = 0;
+fail:
+	/* for the next devices we need it again */
+	fc->fc_i2c_adap[0].no_base_addr = 0;
+	return 0;
+}
+#endif
+
+/* SkyStar2 rev 2.8 */
+#if defined(CONFIG_DVB_CX24123_MODULE)
+static struct cx24123_config skystar2_rev2_8_cx24123_config = {
+	.demod_address = 0x55,
+	.dont_use_pll = 1,
+	.agc_callback = cx24113_agc_callback,
+};
+
+static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
+	.i2c_addr = 0x54,
+	.xtal_khz = 10111,
+};
+
+static int skystar2_rev28_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	struct i2c_adapter *i2c_tuner;
+
+	fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config,
+			    i2c);
+	if (!fc->fe)
+		return 0;
+
+	i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);;
+	if (!i2c_tuner)
+		return 0;
+
+	if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config,
+			i2c_tuner)) {
+		err("CX24113 could NOT be attached");
+		return 0;
+	}
+	info("CX24113 successfully attached");
+
+	fc->fc_i2c_adap[2].no_base_addr = 1;
+	if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
+			0x08, 0, 0)) {
+		err("ISL6421 could NOT be attached");
+		fc->fc_i2c_adap[2].no_base_addr = 0;
+		return 0;
+	}
+	info("ISL6421 successfully attached");
+	/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
+	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
+	return 1;
+}
+#endif
+
+/* AirStar DVB-T */
+#if defined(CONFIG_DVB_MT352_MODULE)
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 {
-	static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
-	static u8 mt352_reset [] = { 0x50, 0x80 };
-	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
+	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
+	static u8 mt352_reset[] = { 0x50, 0x80 };
+	static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+	static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 };
 	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
 
 	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
 	udelay(2000);
 	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
 	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-
 	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
 	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
 	return 0;
 }
 
-static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
+static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
 {
 	u32 div;
 	unsigned char bs = 0;
@@ -287,19 +463,20 @@ static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_fro
 	if (buf_len < 5)
 		return -EINVAL;
 
-	#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
+#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
 	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
-	if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
-	if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
-	if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
+	if (params->frequency >= 48000000 && params->frequency <= 154000000) \
+		bs = 0x09;
+	if (params->frequency >= 161000000 && params->frequency <= 439000000) \
+		bs = 0x0a;
+	if (params->frequency >= 447000000 && params->frequency <= 863000000) \
+		bs = 0x08;
 
 	pllbuf[0] = 0x61;
 	pllbuf[1] = div >> 8;
 	pllbuf[2] = div & 0xff;
 	pllbuf[3] = 0xcc;
 	pllbuf[4] = bs;
-
 	return 5;
 }
 
@@ -308,70 +485,95 @@ static struct mt352_config samsung_tdtc9251dh0_config = {
 	.demod_init    = samsung_tdtc9251dh0_demod_init,
 };
 
-static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+static int airstar_dvbt_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
+	if (fc->fe != NULL) {
+		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
+		return 1;
+	}
+	return 0;
+}
+#endif
+
+/* AirStar ATSC 1st generation */
+#if defined(CONFIG_DVB_BCM3510_MODULE)
+static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
+	const struct firmware **fw, char* name)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
 	return request_firmware(fw, name, fc->dev);
 }
 
-static struct lgdt330x_config air2pc_atsc_hd5000_config = {
-	.demod_address       = 0x59,
-	.demod_chip          = LGDT3303,
-	.serial_mpeg         = 0x04,
-	.clock_polarity_flip = 1,
-};
-
-static struct nxt200x_config samsung_tbmv_config = {
-	.demod_address    = 0x0a,
-};
-
 static struct bcm3510_config air2pc_atsc_first_gen_config = {
 	.demod_address    = 0x0f,
 	.request_firmware = flexcop_fe_request_firmware,
 };
 
-static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
+static int airstar_atsc1_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
 {
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	struct flexcop_device *fc = fe->dvb->priv;
-
-	div = (params->frequency + (125/2)) / 125;
+	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
+	return fc->fe != NULL;
+}
+#endif
 
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = (div >> 0) & 0xff;
-	buf[2] = 0x84 | ((div >> 10) & 0x60);
-	buf[3] = 0x80;
+/* AirStar ATSC 2nd generation */
+#if defined(CONFIG_DVB_NXT200X_MODULE)
+static struct nxt200x_config samsung_tbmv_config = {
+	.demod_address = 0x0a,
+};
 
-	if (params->frequency < 1550000)
-		buf[3] |= 0x02;
+static int airstar_atsc2_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
+	if (!fc->fe)
+		return 0;
 
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
+	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+			    DVB_PLL_SAMSUNG_TBMV);
 }
+#endif
 
-static struct mt312_config skystar23_samsung_tbdu18132_config = {
-
-	.demod_address = 0x0e,
+/* AirStar ATSC 3rd generation */
+#if defined(CONFIG_DVB_LGDT330X_MODULE)
+static struct lgdt330x_config air2pc_atsc_hd5000_config = {
+	.demod_address       = 0x59,
+	.demod_chip          = LGDT3303,
+	.serial_mpeg         = 0x04,
+	.clock_polarity_flip = 1,
 };
 
+static int airstar_atsc3_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
+	if (!fc->fe)
+		return 0;
+
+	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
+			    TUNER_LG_TDVS_H06XF);
+}
+#endif
+
+/* CableStar2 DVB-C */
+#if defined(CONFIG_DVB_STV0297_MODULE)
 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
-					       struct dvb_frontend_parameters *fep)
+		struct dvb_frontend_parameters *fep)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
 	u8 buf[4];
 	u16 div;
 	int ret;
 
-/*  62.5 kHz * 10 */
+/* 62.5 kHz * 10 */
 #define REF_FREQ    625
 #define FREQ_OFFSET 36125
 
-	div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10)  / REF_FREQ; // 4 MHz = 4000 KHz
+	div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ;
+/* 4 MHz = 4000 KHz */
 
 	buf[0] = (u8)( div >> 8) & 0x7f;
 	buf[1] = (u8)        div & 0xff;
@@ -384,11 +586,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
  * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
 	buf[2] = 0x95;
 
-// Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
-//  47 - 153   0  *  0   0   0   0   0   1   0x01
-// 153 - 430   0  *  0   0   0   0   1   0   0x02
-// 430 - 822   0  *  0   0   1   0   0   0   0x08
-// 822 - 862   1  *  0   0   1   0   0   0   0x88
+/* Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
+ *  47 - 153   0  *  0   0   0   0   0   1   0x01
+ * 153 - 430   0  *  0   0   0   0   1   0   0x02
+ * 430 - 822   0  *  0   0   1   0   0   0   0x08
+ * 822 - 862   1  *  0   0   1   0   0   0   0x88 */
 
 	     if (fep->frequency <= 153000000) buf[3] = 0x01;
 	else if (fep->frequency <= 430000000) buf[3] = 0x02;
@@ -397,11 +599,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
 
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);
-	deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]);
+	deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency,
+	buf[0], buf[1], buf[2], buf[3]);
 	ret = fc->i2c_request(&fc->fc_i2c_adap[2],
-		FC_WRITE, 0x61, buf[0], &buf[1], 3);
+			FC_WRITE, 0x61, buf[0], &buf[1], 3);
 	deb_tuner("tuner write returned: %d\n",ret);
-
 	return ret;
 }
 
@@ -481,182 +683,73 @@ static u8 alps_tdee4_stv0297_inittab[] = {
 static struct stv0297_config alps_tdee4_stv0297_config = {
 	.demod_address = 0x1c,
 	.inittab = alps_tdee4_stv0297_inittab,
-//	.invert = 1,
-//	.pll_set = alps_tdee4_stv0297_pll_set,
-};
-
-
-/* SkyStar2 rev2.7 (a/u) */
-static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
-	.demod_address = 0x53,
-	.invert = 1,
-	.repeated_start_workaround = 1,
-	.serial_mpeg = 1,
-};
-
-static struct itd1000_config skystar2_rev2_7_itd1000_config = {
-	.i2c_address = 0x61,
 };
 
-/* SkyStar2 rev2.8 */
-static struct cx24123_config skystar2_rev2_8_cx24123_config = {
-	.demod_address = 0x55,
-	.dont_use_pll = 1,
-	.agc_callback = cx24113_agc_callback,
-};
-
-static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
-	.i2c_addr = 0x54,
-	.xtal_khz = 10111,
-};
-
-/* try to figure out the frontend, each card/box can have on of the following list */
-int flexcop_frontend_init(struct flexcop_device *fc)
+static int cablestar2_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
 {
-	struct dvb_frontend_ops *ops;
-	struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap;
-	struct i2c_adapter *i2c_tuner;
-
-	/* enable no_base_addr - no repeated start when reading */
-	fc->fc_i2c_adap[0].no_base_addr = 1;
-	fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c);
-	if (fc->fe != NULL) {
-		flexcop_ibi_value r108;
-		i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
-		ops = &fc->fe->ops;
-
-		fc->fe_sleep = ops->sleep;
-		ops->sleep   = flexcop_sleep;
-
-		fc->dev_type = FC_SKY_REV27;
-
-		/* enable no_base_addr - no repeated start when reading */
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
-
-		/* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */
-		r108.raw = 0x00000506;
-		fc->write_ibi_reg(fc, tw_sm_c_108, r108);
-		if (i2c_tuner) {
-			if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL)
-				err("ITD1000 could NOT be attached");
-			else
-				info("ITD1000 successfully attached");
-		}
-		goto fe_found;
-	}
-	fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */
-
-	/* try the sky v2.8 (cx24123, isl6421) */
-	fc->fe = dvb_attach(cx24123_attach,
-		&skystar2_rev2_8_cx24123_config, i2c);
-	if (fc->fe != NULL) {
-		i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
-		if (i2c_tuner != NULL) {
-			if (dvb_attach(cx24113_attach, fc->fe,
-					&skystar2_rev2_8_cx24113_config,
-					i2c_tuner) == NULL)
-				err("CX24113 could NOT be attached");
-			else
-				info("CX24113 successfully attached");
-		}
-
-		fc->dev_type = FC_SKY_REV28;
-
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe,
-		       &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
-
-		/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
-		 * IR-receiver (PIC16F818) - but the card has no input for
-		 * that ??? */
-
-		goto fe_found;
-    }
-
-	/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
-	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
-	if (fc->fe != NULL) {
-		ops = &fc->fe->ops;
-
-		ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
-
-		ops->set_voltage = flexcop_set_voltage;
-
-		fc->fe_sleep = ops->sleep;
-		ops->sleep = flexcop_sleep;
-
-		fc->dev_type = FC_SKY_REV26;
-		goto fe_found;
-	}
-
-	/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
-	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_DVBT;
-		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
-		goto fe_found;
-	}
-
-	/* try the air atsc 2nd generation (nxt2002) */
-	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC2;
-		dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV);
-		goto fe_found;
-	}
-
-	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC3;
-		dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
-				TUNER_LG_TDVS_H06XF);
-		goto fe_found;
-	}
-
-	/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
-	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC1;
-		goto fe_found;
-	}
-
-	/* try the cable dvb (stv0297) */
 	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_CABLE;
-		fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
-		goto fe_found;
+	if (!fc->fe) {
+		/* Reset for next frontend to try */
+		fc->fc_i2c_adap[0].no_base_addr = 0;
+		return 0;
 	}
-	fc->fc_i2c_adap[0].no_base_addr = 0;
-
-	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
-	fc->fe = dvb_attach(mt312_attach,
-		&skystar23_samsung_tbdu18132_config, i2c);
-	if (fc->fe != NULL) {
-		ops = &fc->fe->ops;
-
-		ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params;
-
-		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
-		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
-		ops->set_tone               = flexcop_set_tone;
-		ops->set_voltage            = flexcop_set_voltage;
-
-		fc->fe_sleep                = ops->sleep;
-		ops->sleep                  = flexcop_sleep;
+	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
+	return 1;
+}
+#endif
+
+static struct {
+	flexcop_device_type_t type;
+	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
+} flexcop_frontends[] = {
+#if defined(CONFIG_DVB_S5H1420_MODULE)
+	{ FC_SKY_REV27, skystar2_rev27_attach },
+#endif
+#if defined(CONFIG_DVB_CX24123_MODULE)
+	{ FC_SKY_REV28, skystar2_rev28_attach },
+#endif
+#if defined(CONFIG_DVB_STV0299_MODULE)
+	{ FC_SKY_REV26, skystar2_rev26_attach },
+#endif
+#if defined(CONFIG_DVB_MT352_MODULE)
+	{ FC_AIR_DVBT, airstar_dvbt_attach },
+#endif
+#if defined(CONFIG_DVB_NXT200X_MODULE)
+	{ FC_AIR_ATSC2, airstar_atsc2_attach },
+#endif
+#if defined(CONFIG_DVB_LGDT330X_MODULE)
+	{ FC_AIR_ATSC3, airstar_atsc3_attach },
+#endif
+#if defined(CONFIG_DVB_BCM3510_MODULE)
+	{ FC_AIR_ATSC1, airstar_atsc1_attach },
+#endif
+#if defined(CONFIG_DVB_STV0297_MODULE)
+	{ FC_CABLE, cablestar2_attach },
+#endif
+#if defined(CONFIG_DVB_MT312_MODULE)
+	{ FC_SKY_REV23, skystar2_rev23_attach },
+#endif
+};
 
-		fc->dev_type                = FC_SKY_REV23;
-		goto fe_found;
+/* try to figure out the frontend */
+int flexcop_frontend_init(struct flexcop_device *fc)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+		/* type needs to be set before, because of some workarounds
+		 * done based on the probed card type */
+		fc->dev_type = flexcop_frontends[i].type;
+		if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap))
+			goto fe_found;
+		/* Clean up partially attached frontend */
+		if (fc->fe) {
+			dvb_frontend_detach(fc->fe);
+			fc->fe = NULL;
+		}
 	}
-
+	fc->dev_type = FC_UNK;
 	err("no frontend driver found for this B2C2/FlexCop adapter");
 	return -ENODEV;
 
@@ -664,9 +757,7 @@ fe_found:
 	info("found '%s' .", fc->fe->ops.info.name);
 	if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
 		err("frontend registration failed!");
-		ops = &fc->fe->ops;
-		if (ops->release != NULL)
-			ops->release(fc->fe);
+		dvb_frontend_detach(fc->fe);
 		fc->fe = NULL;
 		return -EINVAL;
 	}
@@ -680,6 +771,5 @@ void flexcop_frontend_exit(struct flexcop_device *fc)
 		dvb_unregister_frontend(fc->fe);
 		dvb_frontend_detach(fc->fe);
 	}
-
 	fc->init_state &= ~FC_STATE_FE_INIT;
 }
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index e2bed507648..fd1df235276 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -200,7 +200,7 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap,
 					msgs[i].buf[0], &msgs[i].buf[1],
 					msgs[i].len - 1);
 		if (ret < 0) {
-			err("i2c master_xfer failed");
+			deb_i2c("i2c master_xfer failed");
 			break;
 		}
 	}
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
index e56627d2f0f..f06f3a9070f 100644
--- a/drivers/media/dvb/b2c2/flexcop-misc.c
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -46,16 +46,16 @@ static const char *flexcop_revision_names[] = {
 };
 
 static const char *flexcop_device_names[] = {
-	"Unknown device",
-	"Air2PC/AirStar 2 DVB-T",
-	"Air2PC/AirStar 2 ATSC 1st generation",
-	"Air2PC/AirStar 2 ATSC 2nd generation",
-	"Sky2PC/SkyStar 2 DVB-S",
-	"Sky2PC/SkyStar 2 DVB-S (old version)",
-	"Cable2PC/CableStar 2 DVB-C",
-	"Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
-	"Sky2PC/SkyStar 2 DVB-S rev 2.7a/u",
-	"Sky2PC/SkyStar 2 DVB-S rev 2.8",
+	[FC_UNK]	= "Unknown device",
+	[FC_CABLE]	= "Cable2PC/CableStar 2 DVB-C",
+	[FC_AIR_DVBT]	= "Air2PC/AirStar 2 DVB-T",
+	[FC_AIR_ATSC1]	= "Air2PC/AirStar 2 ATSC 1st generation",
+	[FC_AIR_ATSC2]	= "Air2PC/AirStar 2 ATSC 2nd generation",
+	[FC_AIR_ATSC3]	= "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
+	[FC_SKY_REV23]	= "Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)",
+	[FC_SKY_REV26]	= "Sky2PC/SkyStar 2 DVB-S rev 2.6",
+	[FC_SKY_REV27]	= "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u",
+	[FC_SKY_REV28]	= "Sky2PC/SkyStar 2 DVB-S rev 2.8",
 };
 
 static const char *flexcop_bus_names[] = {
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index 56d8fab688b..a24c125331f 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -508,12 +508,6 @@ static int __devinit bt878_probe(struct pci_dev *dev,
 	pci_set_master(dev);
 	pci_set_drvdata(dev, bt);
 
-/*        if(init_bt878(btv) < 0) {
-		bt878_remove(dev);
-		return -EIO;
-	}
-*/
-
 	if ((result = bt878_mem_alloc(bt))) {
 		printk(KERN_ERR "bt878: failed to allocate memory!\n");
 		goto fail2;
@@ -579,7 +573,7 @@ static struct pci_driver bt878_pci_driver = {
       .name	= "bt878",
       .id_table = bt878_pci_tbl,
       .probe	= bt878_probe,
-      .remove	= bt878_remove,
+      .remove	= __devexit_p(bt878_remove),
 };
 
 static int bt878_pci_driver_registered;
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index 971a8b18f6d..4dbd7d4185a 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -51,6 +51,9 @@
 #ifndef PCI_VENDOR_ID_TRIGEM
 #define PCI_VENDOR_ID_TRIGEM	0x109f
 #endif
+#ifndef PCI_VENDOR_ID_AXESS
+#define PCI_VENDOR_ID_AXESS	0x195d
+#endif
 #ifndef PCI_DEVICE_ID_DM1105
 #define PCI_DEVICE_ID_DM1105	0x036f
 #endif
@@ -60,6 +63,9 @@
 #ifndef PCI_DEVICE_ID_DW2004
 #define PCI_DEVICE_ID_DW2004	0x2004
 #endif
+#ifndef PCI_DEVICE_ID_DM05
+#define PCI_DEVICE_ID_DM05	0x1105
+#endif
 /* ----------------------------------------------- */
 /* sdmc dm1105 registers */
 
@@ -150,6 +156,11 @@
 #define DM1105_LNB_13V				0x00010100
 #define DM1105_LNB_18V				0x00000100
 
+/* GPIO's for LNB power control for Axess DM05 */
+#define DM05_LNB_MASK				0x00000000
+#define DM05_LNB_13V				0x00020000
+#define DM05_LNB_18V				0x00030000
+
 static int ir_debug;
 module_param(ir_debug, int, 0644);
 MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
@@ -188,6 +199,8 @@ struct dm1105dvb {
 
 	/* irq */
 	struct work_struct work;
+	struct workqueue_struct *wq;
+	char wqn[16];
 
 	/* dma */
 	dma_addr_t dma_addr;
@@ -313,15 +326,25 @@ static inline struct dm1105dvb *frontend_to_dm1105dvb(struct dvb_frontend *fe)
 static int dm1105dvb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct dm1105dvb *dm1105dvb = frontend_to_dm1105dvb(fe);
+	u32 lnb_mask, lnb_13v, lnb_18v;
 
-		if (voltage == SEC_VOLTAGE_18) {
-			outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR));
-			outl(DM1105_LNB_18V, dm_io_mem(DM1105_GPIOVAL));
-		} else	{
-		/*LNB ON-13V by default!*/
-			outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR));
-			outl(DM1105_LNB_13V, dm_io_mem(DM1105_GPIOVAL));
-		}
+	switch (dm1105dvb->pdev->subsystem_device) {
+	case PCI_DEVICE_ID_DM05:
+		lnb_mask = DM05_LNB_MASK;
+		lnb_13v = DM05_LNB_13V;
+		lnb_18v = DM05_LNB_18V;
+		break;
+	default:
+		lnb_mask = DM1105_LNB_MASK;
+		lnb_13v = DM1105_LNB_13V;
+		lnb_18v = DM1105_LNB_18V;
+	}
+
+	outl(lnb_mask, dm_io_mem(DM1105_GPIOCTR));
+	if (voltage == SEC_VOLTAGE_18)
+		outl(lnb_18v , dm_io_mem(DM1105_GPIOVAL));
+	else
+		outl(lnb_13v, dm_io_mem(DM1105_GPIOVAL));
 
 	return 0;
 }
@@ -440,7 +463,7 @@ static irqreturn_t dm1105dvb_irq(int irq, void *dev_id)
 	case (INTSTS_TSIRQ | INTSTS_IR):
 		dm1105dvb->nextwrp = inl(dm_io_mem(DM1105_WRP)) -
 					inl(dm_io_mem(DM1105_STADR));
-		schedule_work(&dm1105dvb->work);
+		queue_work(dm1105dvb->wq, &dm1105dvb->work);
 		break;
 	case INTSTS_IR:
 		dm1105dvb->ir.ir_command = inl(dm_io_mem(DM1105_IRCODE));
@@ -567,46 +590,44 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
 	int ret;
 
 	switch (dm1105dvb->pdev->subsystem_device) {
-	case PCI_DEVICE_ID_DW2002:
+	case PCI_DEVICE_ID_DW2004:
 		dm1105dvb->fe = dvb_attach(
-			stv0299_attach, &sharp_z0194a_config,
+			cx24116_attach, &serit_sp2633_config,
 			&dm1105dvb->i2c_adap);
+		if (dm1105dvb->fe)
+			dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage;
 
+		break;
+	default:
+		dm1105dvb->fe = dvb_attach(
+			stv0299_attach, &sharp_z0194a_config,
+			&dm1105dvb->i2c_adap);
 		if (dm1105dvb->fe) {
 			dm1105dvb->fe->ops.set_voltage =
 							dm1105dvb_set_voltage;
 			dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60,
 					&dm1105dvb->i2c_adap, DVB_PLL_OPERA1);
+			break;
 		}
 
-		if (!dm1105dvb->fe) {
-			dm1105dvb->fe = dvb_attach(
-				stv0288_attach, &earda_config,
-				&dm1105dvb->i2c_adap);
-			if (dm1105dvb->fe) {
-				dm1105dvb->fe->ops.set_voltage =
-							dm1105dvb_set_voltage;
-				dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61,
-						&dm1105dvb->i2c_adap);
-			}
+		dm1105dvb->fe = dvb_attach(
+			stv0288_attach, &earda_config,
+			&dm1105dvb->i2c_adap);
+		if (dm1105dvb->fe) {
+			dm1105dvb->fe->ops.set_voltage =
+						dm1105dvb_set_voltage;
+			dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61,
+					&dm1105dvb->i2c_adap);
+			break;
 		}
 
-		if (!dm1105dvb->fe) {
-			dm1105dvb->fe = dvb_attach(
-				si21xx_attach, &serit_config,
-				&dm1105dvb->i2c_adap);
-			if (dm1105dvb->fe)
-				dm1105dvb->fe->ops.set_voltage =
-							dm1105dvb_set_voltage;
-		}
-		break;
-	case PCI_DEVICE_ID_DW2004:
 		dm1105dvb->fe = dvb_attach(
-			cx24116_attach, &serit_sp2633_config,
+			si21xx_attach, &serit_config,
 			&dm1105dvb->i2c_adap);
 		if (dm1105dvb->fe)
-			dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage;
-		break;
+			dm1105dvb->fe->ops.set_voltage =
+						dm1105dvb_set_voltage;
+
 	}
 
 	if (!dm1105dvb->fe) {
@@ -630,10 +651,17 @@ static void __devinit dm1105dvb_read_mac(struct dm1105dvb *dm1105dvb, u8 *mac)
 	static u8 command[1] = { 0x28 };
 
 	struct i2c_msg msg[] = {
-		{ .addr = IIC_24C01_addr >> 1, .flags = 0,
-				.buf = command, .len = 1 },
-		{ .addr = IIC_24C01_addr >> 1, .flags = I2C_M_RD,
-				.buf = mac, .len = 6 },
+		{
+			.addr = IIC_24C01_addr >> 1,
+			.flags = 0,
+			.buf = command,
+			.len = 1
+		}, {
+			.addr = IIC_24C01_addr >> 1,
+			.flags = I2C_M_RD,
+			.buf = mac,
+			.len = 6
+		},
 	};
 
 	dm1105_i2c_xfer(&dm1105dvb->i2c_adap, msg , 2);
@@ -752,14 +780,22 @@ static int __devinit dm1105_probe(struct pci_dev *pdev,
 	dm1105_ir_init(dm1105dvb);
 
 	INIT_WORK(&dm1105dvb->work, dm1105_dmx_buffer);
+	sprintf(dm1105dvb->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num);
+	dm1105dvb->wq = create_singlethread_workqueue(dm1105dvb->wqn);
+	if (!dm1105dvb->wq)
+		goto err_dvb_net;
 
 	ret = request_irq(pdev->irq, dm1105dvb_irq, IRQF_SHARED,
 						DRIVER_NAME, dm1105dvb);
 	if (ret < 0)
-		goto err_free_irq;
+		goto err_workqueue;
 
 	return 0;
 
+err_workqueue:
+	destroy_workqueue(dm1105dvb->wq);
+err_dvb_net:
+	dvb_net_release(&dm1105dvb->dvbnet);
 err_disconnect_frontend:
 	dmx->disconnect_frontend(dmx);
 err_remove_mem_frontend:
@@ -776,8 +812,6 @@ err_i2c_del_adapter:
 	i2c_del_adapter(&dm1105dvb->i2c_adap);
 err_dm1105dvb_hw_exit:
 	dm1105dvb_hw_exit(dm1105dvb);
-err_free_irq:
-	free_irq(pdev->irq, dm1105dvb);
 err_pci_iounmap:
 	pci_iounmap(pdev, dm1105dvb->io_mem);
 err_pci_release_regions:
@@ -834,6 +868,11 @@ static struct pci_device_id dm1105_id_table[] __devinitdata = {
 		.subvendor = PCI_ANY_ID,
 		.subdevice = PCI_DEVICE_ID_DW2004,
 	}, {
+		.vendor = PCI_VENDOR_ID_AXESS,
+		.device = PCI_DEVICE_ID_DM05,
+		.subvendor = PCI_VENDOR_ID_AXESS,
+		.subdevice = PCI_DEVICE_ID_DM05,
+	}, {
 		/* empty */
 	},
 };
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index c35fbb8d8f4..6d6121eb5d5 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -244,19 +244,13 @@ static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count,
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct dmxdev *dmxdev = dvbdev->priv;
-	int ret;
 
-	if (dmxdev->exit) {
-		mutex_unlock(&dmxdev->mutex);
+	if (dmxdev->exit)
 		return -ENODEV;
-	}
 
-	//mutex_lock(&dmxdev->mutex);
-	ret = dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer,
-				     file->f_flags & O_NONBLOCK,
-				     buf, count, ppos);
-	//mutex_unlock(&dmxdev->mutex);
-	return ret;
+	return dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer,
+				      file->f_flags & O_NONBLOCK,
+				      buf, count, ppos);
 }
 
 static int dvb_dvr_set_buffer_size(struct dmxdev *dmxdev,
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index e2eca0b1fe7..cfe2768d24a 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -38,6 +38,16 @@
 */
 // #define DVB_DEMUX_SECTION_LOSS_LOG
 
+static int dvb_demux_tscheck;
+module_param(dvb_demux_tscheck, int, 0644);
+MODULE_PARM_DESC(dvb_demux_tscheck,
+		"enable transport stream continuity and TEI check");
+
+#define dprintk_tscheck(x...) do {                              \
+		if (dvb_demux_tscheck && printk_ratelimit())    \
+			printk(x);                              \
+	} while (0)
+
 /******************************************************************************
  * static inlined helper functions
  ******************************************************************************/
@@ -376,6 +386,36 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
 	u16 pid = ts_pid(buf);
 	int dvr_done = 0;
 
+	if (dvb_demux_tscheck) {
+		if (!demux->cnt_storage)
+			demux->cnt_storage = vmalloc(MAX_PID + 1);
+
+		if (!demux->cnt_storage) {
+			printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n");
+			dvb_demux_tscheck = 0;
+			goto no_dvb_demux_tscheck;
+		}
+
+		/* check pkt counter */
+		if (pid < MAX_PID) {
+			if (buf[1] & 0x80)
+				dprintk_tscheck("TEI detected. "
+						"PID=0x%x data1=0x%x\n",
+						pid, buf[1]);
+
+			if ((buf[3] & 0xf) != demux->cnt_storage[pid])
+				dprintk_tscheck("TS packet counter mismatch. "
+						"PID=0x%x expected 0x%x "
+						"got 0x%x\n",
+						pid, demux->cnt_storage[pid],
+						buf[3] & 0xf);
+
+			demux->cnt_storage[pid] = ((buf[3] & 0xf) + 1)&0xf;
+		};
+		/* end check */
+	};
+no_dvb_demux_tscheck:
+
 	list_for_each_entry(feed, &demux->feed_list, list_head) {
 		if ((feed->pid != pid) && (feed->pid != 0x2000))
 			continue;
@@ -1160,6 +1200,7 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux)
 	int i;
 	struct dmx_demux *dmx = &dvbdemux->dmx;
 
+	dvbdemux->cnt_storage = NULL;
 	dvbdemux->users = 0;
 	dvbdemux->filter = vmalloc(dvbdemux->filternum * sizeof(struct dvb_demux_filter));
 
@@ -1226,6 +1267,7 @@ EXPORT_SYMBOL(dvb_dmx_init);
 
 void dvb_dmx_release(struct dvb_demux *dvbdemux)
 {
+	vfree(dvbdemux->cnt_storage);
 	vfree(dvbdemux->filter);
 	vfree(dvbdemux->feed);
 }
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.h b/drivers/media/dvb/dvb-core/dvb_demux.h
index 2c5f915329c..2fe05d03240 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.h
+++ b/drivers/media/dvb/dvb-core/dvb_demux.h
@@ -42,6 +42,8 @@
 
 #define DVB_DEMUX_MASK_MAX 18
 
+#define MAX_PID 0x1fff
+
 struct dvb_demux_filter {
 	struct dmx_section_filter filter;
 	u8 maskandmode[DMX_MAX_FILTER_SIZE];
@@ -127,6 +129,8 @@ struct dvb_demux {
 
 	struct mutex mutex;
 	spinlock_t lock;
+
+	uint8_t *cnt_storage; /* for TS continuity check */
 };
 
 int dvb_dmx_init(struct dvb_demux *dvbdemux);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index ebc78157b9b..f50ca7292a7 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -543,6 +543,7 @@ restart:
 
 		if (kthread_should_stop() || dvb_frontend_is_exiting(fe)) {
 			/* got signal or quitting */
+			fepriv->exit = 1;
 			break;
 		}
 
@@ -656,6 +657,7 @@ restart:
 	}
 
 	fepriv->thread = NULL;
+	fepriv->exit = 0;
 	mb();
 
 	dvb_frontend_wakeup(fe);
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index a454ee8f1e4..479dd05762a 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -447,6 +447,15 @@ static int dvb_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
+static char *dvb_nodename(struct device *dev)
+{
+	struct dvb_device *dvbdev = dev_get_drvdata(dev);
+
+	return kasprintf(GFP_KERNEL, "dvb/adapter%d/%s%d",
+		dvbdev->adapter->num, dnames[dvbdev->type], dvbdev->id);
+}
+
+
 static int __init init_dvbdev(void)
 {
 	int retval;
@@ -469,6 +478,7 @@ static int __init init_dvbdev(void)
 		goto error;
 	}
 	dvb_class->dev_uevent = dvb_uevent;
+	dvb_class->nodename = dvb_nodename;
 	return 0;
 
 error:
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 60955a70d88..496c1a37034 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -216,7 +216,7 @@ config DVB_USB_TTUSB2
 	help
 	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
 	  firmware protocol used by this module is similar to the one used by the
-	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
 
 config DVB_USB_DTT200U
 	tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
@@ -261,6 +261,7 @@ config DVB_USB_DW2102
 	select DVB_STB6000 if !DVB_FE_CUSTOMISE
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_SI21XX if !DVB_FE_CUSTOMISE
+	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers
 	  and the TeVii S650.
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 53bfc8e42fb..4cb31e7c13c 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -40,7 +40,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 static DEFINE_MUTEX(af9015_usb_mutex);
 
 static struct af9015_config af9015_config;
-static struct dvb_usb_device_properties af9015_properties[2];
+static struct dvb_usb_device_properties af9015_properties[3];
 static int af9015_properties_count = ARRAY_SIZE(af9015_properties);
 
 static struct af9013_config af9015_af9013_config[] = {
@@ -538,7 +538,7 @@ exit:
 /* dump eeprom */
 static int af9015_eeprom_dump(struct dvb_usb_device *d)
 {
-	char buf[52], buf2[4];
+	char buf[4+3*16+1], buf2[4];
 	u8 reg, val;
 
 	for (reg = 0; ; reg++) {
@@ -1261,7 +1261,11 @@ static struct usb_device_id af9015_usb_table[] = {
 	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_KWORLD_395U_2)},
 	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_KWORLD_395U_3)},
 	{USB_DEVICE(USB_VID_AFATECH,   USB_PID_TREKSTOR_DVBT)},
-	{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850)},
+/* 20 */{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850)},
+	{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805)},
+	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_CONCEPTRONIC_CTVDIGRCU)},
+	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_KWORLD_MC810)},
+	{USB_DEVICE(USB_VID_KYE,       USB_PID_GENIUS_TVGO_DVB_T03)},
 	{0},
 };
 MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1321,7 +1325,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.i2c_algo = &af9015_i2c_algo,
 
-		.num_device_descs = 9,
+		.num_device_descs = 9, /* max 9 */
 		.devices = {
 			{
 				.name = "Afatech AF9015 DVB-T USB2.0 stick",
@@ -1426,7 +1430,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.i2c_algo = &af9015_i2c_algo,
 
-		.num_device_descs = 9,
+		.num_device_descs = 9, /* max 9 */
 		.devices = {
 			{
 				.name = "Xtensions XD-380",
@@ -1478,7 +1482,85 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 				.warm_ids = {NULL},
 			},
 		}
-	}
+	}, {
+		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+		.usb_ctrl = DEVICE_SPECIFIC,
+		.download_firmware = af9015_download_firmware,
+		.firmware = "dvb-usb-af9015.fw",
+		.no_reconnect = 1,
+
+		.size_of_priv = sizeof(struct af9015_state), \
+
+		.num_adapters = 2,
+		.adapter = {
+			{
+				.caps = DVB_USB_ADAP_HAS_PID_FILTER |
+				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+				.pid_filter_count = 32,
+				.pid_filter       = af9015_pid_filter,
+				.pid_filter_ctrl  = af9015_pid_filter_ctrl,
+
+				.frontend_attach =
+					af9015_af9013_frontend_attach,
+				.tuner_attach    = af9015_tuner_attach,
+				.stream = {
+					.type = USB_BULK,
+					.count = 6,
+					.endpoint = 0x84,
+				},
+			},
+			{
+				.frontend_attach =
+					af9015_af9013_frontend_attach,
+				.tuner_attach    = af9015_tuner_attach,
+				.stream = {
+					.type = USB_BULK,
+					.count = 6,
+					.endpoint = 0x85,
+					.u = {
+						.bulk = {
+							.buffersize =
+						TS_USB20_MAX_PACKET_SIZE,
+						}
+					}
+				},
+			}
+		},
+
+		.identify_state = af9015_identify_state,
+
+		.rc_query         = af9015_rc_query,
+		.rc_interval      = 150,
+
+		.i2c_algo = &af9015_i2c_algo,
+
+		.num_device_descs = 4, /* max 9 */
+		.devices = {
+			{
+				.name = "AverMedia AVerTV Volar GPS 805 (A805)",
+				.cold_ids = {&af9015_usb_table[21], NULL},
+				.warm_ids = {NULL},
+			},
+			{
+				.name = "Conceptronic USB2.0 DVB-T CTVDIGRCU " \
+					"V3.0",
+				.cold_ids = {&af9015_usb_table[22], NULL},
+				.warm_ids = {NULL},
+			},
+			{
+				.name = "KWorld Digial MC-810",
+				.cold_ids = {&af9015_usb_table[23], NULL},
+				.warm_ids = {NULL},
+			},
+			{
+				.name = "Genius TVGo DVB-T03",
+				.cold_ids = {&af9015_usb_table[24], NULL},
+				.warm_ids = {NULL},
+			},
+		}
+	},
 };
 
 static int af9015_usb_probe(struct usb_interface *intf,
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 8ddbadf6219..818b2ab584b 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1346,9 +1346,9 @@ static int dib0700_xc5000_tuner_callback(void *priv, int component,
 	if (command == XC5000_TUNER_RESET) {
 		/* Reset the tuner */
 		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
-		msleep(330); /* from Windows USB trace */
+		msleep(10);
 		dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
-		msleep(330); /* from Windows USB trace */
+		msleep(10);
 	} else {
 		err("xc5000: unknown tuner callback command: %d\n", command);
 		return -EINVAL;
@@ -1493,6 +1493,10 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
 	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_MC770) },
 	{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT) },
+/* 50 */{ USB_DEVICE(USB_VID_ELGATO,	USB_PID_ELGATO_EYETV_DTT_Dlx) },
+	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_H) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T3) },
+	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T5) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1692,7 +1696,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.num_device_descs = 11,
+		.num_device_descs = 12,
 		.devices = {
 			{   "DiBcom STK7070P reference design",
 				{ &dib0700_usb_id_table[15], NULL },
@@ -1726,8 +1730,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[30], NULL },
 				{ NULL },
 			},
-			{   "Terratec Cinergy T USB XXS",
-				{ &dib0700_usb_id_table[33], NULL },
+			{   "Terratec Cinergy T USB XXS/ T3",
+				{ &dib0700_usb_id_table[33],
+					&dib0700_usb_id_table[52], NULL },
 				{ NULL },
 			},
 			{   "Elgato EyeTV DTT",
@@ -1738,6 +1743,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[45], NULL },
 				{ NULL },
 			},
+			{   "Elgato EyeTV Dtt Dlx PD378S",
+				{ &dib0700_usb_id_table[50], NULL },
+				{ NULL },
+			},
 		},
 
 		.rc_interval      = DEFAULT_RC_INTERVAL,
@@ -1784,8 +1793,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[36], NULL },
 				{ NULL },
 			},
-			{  "Terratec Cinergy DT USB XS Diversity",
-				{ &dib0700_usb_id_table[43], NULL },
+			{  "Terratec Cinergy DT USB XS Diversity/ T5",
+				{ &dib0700_usb_id_table[43],
+					&dib0700_usb_id_table[53], NULL},
 				{ NULL },
 			},
 			{  "Sony PlayTV",
@@ -1812,7 +1822,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.num_device_descs = 7,
+		.num_device_descs = 8,
 		.devices = {
 			{   "Terratec Cinergy HT USB XE",
 				{ &dib0700_usb_id_table[27], NULL },
@@ -1842,6 +1852,11 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[48], NULL },
 				{ NULL },
 			},
+			{   "Leadtek WinFast DTV Dongle H",
+				{ &dib0700_usb_id_table[51], NULL },
+				{ NULL },
+			},
+
 		},
 		.rc_interval      = DEFAULT_RC_INTERVAL,
 		.rc_key_map       = dib0700_rc_keys,
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index 8ee6cd4da9e..8dbad1ec53c 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -133,14 +133,17 @@ static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
 
 	for (i = 0; i < num; i++) {
 		/* write/read request */
-		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
+		if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0
+					  && (msg[i+1].flags & I2C_M_RD)) {
 			if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,
 						msg[i+1].buf,msg[i+1].len) < 0)
 				break;
 			i++;
-		} else
+		} else if ((msg[i].flags & I2C_M_RD) == 0) {
 			if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
 				break;
+		} else
+			break;
 	}
 
 	mutex_unlock(&d->i2c_mutex);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index f506c74119f..9593b728999 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -80,6 +80,7 @@
 #define USB_PID_COMPRO_DVBU2000_UNK_WARM		0x010d
 #define USB_PID_COMPRO_VIDEOMATE_U500			0x1e78
 #define USB_PID_COMPRO_VIDEOMATE_U500_PC		0x1e80
+#define USB_PID_CONCEPTRONIC_CTVDIGRCU			0xe397
 #define USB_PID_CONEXANT_D680_DMB			0x86d6
 #define USB_PID_DIBCOM_HOOK_DEFAULT			0x0064
 #define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM		0x0065
@@ -97,6 +98,7 @@
 #define USB_PID_DPOSH_M9206_COLD			0x9206
 #define USB_PID_DPOSH_M9206_WARM			0xa090
 #define USB_PID_UNIWILL_STK7700P			0x6003
+#define USB_PID_GENIUS_TVGO_DVB_T03			0x4012
 #define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0
 #define USB_PID_GRANDTEC_DVBT_USB_WARM			0x0fa1
 #define USB_PID_INTEL_CE9500				0x9500
@@ -104,6 +106,7 @@
 #define USB_PID_KWORLD_395U				0xe396
 #define USB_PID_KWORLD_395U_2				0xe39b
 #define USB_PID_KWORLD_395U_3				0xe395
+#define USB_PID_KWORLD_MC810				0xc810
 #define USB_PID_KWORLD_PC160_2T				0xc160
 #define USB_PID_KWORLD_VSTREAM_COLD			0x17de
 #define USB_PID_KWORLD_VSTREAM_WARM			0x17df
@@ -171,6 +174,7 @@
 #define USB_PID_AVERMEDIA_A309				0xa309
 #define USB_PID_AVERMEDIA_A310				0xa310
 #define USB_PID_AVERMEDIA_A850				0x850a
+#define USB_PID_AVERMEDIA_A805				0xa805
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081
@@ -178,6 +182,8 @@
 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
 #define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
+#define USB_PID_TERRATEC_T3				0x10a0
+#define USB_PID_TERRATEC_T5				0x10a1
 #define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
 #define USB_PID_PINNACLE_PCTV2000E			0x022c
 #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH		0x0228
@@ -222,6 +228,7 @@
 #define USB_PID_WINFAST_DTV_DONGLE_COLD			0x6025
 #define USB_PID_WINFAST_DTV_DONGLE_WARM			0x6026
 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P		0x6f00
+#define USB_PID_WINFAST_DTV_DONGLE_H			0x60f6
 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2		0x6f01
 #define USB_PID_WINFAST_DTV_DONGLE_GOLD			0x6029
 #define USB_PID_GENPIX_8PSK_REV_1_COLD			0x0200
@@ -251,5 +258,6 @@
 #define USB_PID_MSI_DIGI_VOX_MINI_III                   0x8807
 #define USB_PID_SONY_PLAYTV				0x0003
 #define USB_PID_ELGATO_EYETV_DTT			0x0021
+#define USB_PID_ELGATO_EYETV_DTT_Dlx			0x0020
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 2d5352e54dc..e441d274e6c 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -196,7 +196,7 @@ struct dvb_usb_device_properties {
 #define CYPRESS_FX2     3
 	int        usb_ctrl;
 	int        (*download_firmware) (struct usb_device *, const struct firmware *);
-	const char firmware[FIRMWARE_NAME_MAX];
+	const char *firmware;
 	int        no_reconnect;
 
 	int size_of_priv;
@@ -223,7 +223,7 @@ struct dvb_usb_device_properties {
 	int generic_bulk_ctrl_endpoint;
 
 	int num_device_descs;
-	struct dvb_usb_device_description devices[11];
+	struct dvb_usb_device_description devices[12];
 };
 
 /**
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index c65f273ff31..75de49c0d94 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1,7 +1,7 @@
 /* DVB USB framework compliant Linux driver for the
-*	DVBWorld DVB-S 2101, 2102, DVB-S2 2104 Card
-*
-* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+*	DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101,
+*	TeVii S600, S650 Cards
+* Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by)
 *
 *	This program is free software; you can redistribute it and/or modify it
 *	under the terms of the GNU General Public License as published by the
@@ -17,6 +17,7 @@
 #include "stb6000.h"
 #include "eds1547.h"
 #include "cx24116.h"
+#include "tda1002x.h"
 
 #ifndef USB_PID_DW2102
 #define USB_PID_DW2102 0x2102
@@ -26,10 +27,18 @@
 #define USB_PID_DW2104 0x2104
 #endif
 
+#ifndef USB_PID_DW3101
+#define USB_PID_DW3101 0x3101
+#endif
+
 #ifndef USB_PID_CINERGY_S
 #define USB_PID_CINERGY_S 0x0064
 #endif
 
+#ifndef USB_PID_TEVII_S650
+#define USB_PID_TEVII_S650 0xd650
+#endif
+
 #define DW210X_READ_MSG 0
 #define DW210X_WRITE_MSG 1
 
@@ -40,18 +49,21 @@
 #define DW2102_VOLTAGE_CTRL (0x1800)
 #define DW2102_RC_QUERY (0x1a00)
 
-struct dw210x_state {
-	u32 last_key_pressed;
-};
-struct dw210x_rc_keys {
-	u32 keycode;
-	u32 event;
+struct dvb_usb_rc_keys_table {
+	struct dvb_usb_rc_key *rc_keys;
+	int rc_keys_size;
 };
 
 /* debug */
 static int dvb_usb_dw2102_debug;
 module_param_named(debug, dvb_usb_dw2102_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer (or-able))." DVB_USB_DEBUG_STATUS);
+MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))."
+						DVB_USB_DEBUG_STATUS);
+
+/* keymaps */
+static int ir_keymap;
+module_param_named(keymap, ir_keymap, int, 0644);
+MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs  ...");
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -79,7 +91,7 @@ static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value,
 static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 		int num)
 {
-struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
 	int i = 0, ret = 0;
 	u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
 	u16 value;
@@ -205,6 +217,7 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap,
 	mutex_unlock(&d->i2c_mutex);
 	return num;
 }
+
 static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
 {
 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
@@ -219,7 +232,7 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
 	case 2: {
 		/* read */
 		/* first write first register number */
-		u8 ibuf [msg[1].len + 2], obuf[3];
+		u8 ibuf[msg[1].len + 2], obuf[3];
 		obuf[0] = 0xd0;
 		obuf[1] = msg[0].len;
 		obuf[2] = msg[0].buf[0];
@@ -293,7 +306,7 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i
 	case 2: {
 		/* read */
 		/* first write first register number */
-		u8 ibuf [msg[1].len + 2], obuf[3];
+		u8 ibuf[msg[1].len + 2], obuf[3];
 		obuf[0] = 0xaa;
 		obuf[1] = msg[0].len;
 		obuf[2] = msg[0].buf[0];
@@ -360,6 +373,69 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i
 	return num;
 }
 
+static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+								int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int ret = 0, i;
+
+	if (!d)
+		return -ENODEV;
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	switch (num) {
+	case 2: {
+		/* read */
+		/* first write first register number */
+		u8 ibuf[msg[1].len + 2], obuf[3];
+		obuf[0] = msg[0].addr << 1;
+		obuf[1] = msg[0].len;
+		obuf[2] = msg[0].buf[0];
+		ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+				obuf, msg[0].len + 2, DW210X_WRITE_MSG);
+		/* second read registers */
+		ret = dw210x_op_rw(d->udev, 0xc3, 0x19 , 0,
+				ibuf, msg[1].len + 2, DW210X_READ_MSG);
+		memcpy(msg[1].buf, ibuf + 2, msg[1].len);
+
+		break;
+	}
+	case 1:
+		switch (msg[0].addr) {
+		case 0x60:
+		case 0x0c: {
+			/* write to register */
+			u8 obuf[msg[0].len + 2];
+			obuf[0] = msg[0].addr << 1;
+			obuf[1] = msg[0].len;
+			memcpy(obuf + 2, msg[0].buf, msg[0].len);
+			ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+					obuf, msg[0].len + 2, DW210X_WRITE_MSG);
+			break;
+		}
+		case(DW2102_RC_QUERY): {
+			u8 ibuf[2];
+			ret  = dw210x_op_rw(d->udev, 0xb8, 0, 0,
+					ibuf, 2, DW210X_READ_MSG);
+			memcpy(msg[0].buf, ibuf , 2);
+			break;
+		}
+		}
+
+		break;
+	}
+
+	for (i = 0; i < num; i++) {
+		deb_xfer("%02x:%02x: %s ", i, msg[i].addr,
+				msg[i].flags == 0 ? ">>>" : "<<<");
+		debug_dump(msg[i].buf, msg[i].len, deb_xfer);
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return num;
+}
+
 static u32 dw210x_i2c_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C;
@@ -385,6 +461,11 @@ static struct i2c_algorithm dw2104_i2c_algo = {
 	.functionality = dw210x_i2c_func,
 };
 
+static struct i2c_algorithm dw3101_i2c_algo = {
+	.master_xfer = dw3101_i2c_transfer,
+	.functionality = dw210x_i2c_func,
+};
+
 static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 {
 	int i;
@@ -404,6 +485,7 @@ static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 			debug_dump(eepromline, 16, deb_xfer);
 		}
 	}
+
 	memcpy(mac, eeprom + 8, 6);
 	return 0;
 };
@@ -448,6 +530,11 @@ static struct si21xx_config serit_sp1511lhb_config = {
 
 };
 
+static struct tda10023_config dw3101_tda10023_config = {
+	.demod_address = 0x0c,
+	.invert = 1,
+};
+
 static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
 {
 	if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config,
@@ -460,6 +547,7 @@ static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
 }
 
 static struct dvb_usb_device_properties dw2102_properties;
+static struct dvb_usb_device_properties dw2104_properties;
 
 static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
 {
@@ -497,6 +585,17 @@ static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
 	return -EIO;
 }
 
+static int dw3101_frontend_attach(struct dvb_usb_adapter *d)
+{
+	d->fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config,
+				&d->dev->i2c_adap, 0x48);
+	if (d->fe != NULL) {
+		info("Attached tda10023!\n");
+		return 0;
+	}
+	return -EIO;
+}
+
 static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	dvb_attach(dvb_pll_attach, adap->fe, 0x60,
@@ -512,6 +611,14 @@ static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
+static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+		&adap->dev->i2c_adap, DVB_PLL_TUA6034);
+
+	return 0;
+}
+
 static struct dvb_usb_rc_key dw210x_rc_keys[] = {
 	{ 0xf8,	0x0a, KEY_Q },		/*power*/
 	{ 0xf8,	0x0c, KEY_M },		/*mute*/
@@ -544,44 +651,147 @@ static struct dvb_usb_rc_key dw210x_rc_keys[] = {
 	{ 0xf8, 0x40, KEY_F },		/*full*/
 	{ 0xf8, 0x1e, KEY_W },		/*tvmode*/
 	{ 0xf8, 0x1b, KEY_B },		/*recall*/
+};
 
+static struct dvb_usb_rc_key tevii_rc_keys[] = {
+	{ 0xf8, 0x0a, KEY_POWER },
+	{ 0xf8, 0x0c, KEY_MUTE },
+	{ 0xf8, 0x11, KEY_1 },
+	{ 0xf8, 0x12, KEY_2 },
+	{ 0xf8, 0x13, KEY_3 },
+	{ 0xf8, 0x14, KEY_4 },
+	{ 0xf8, 0x15, KEY_5 },
+	{ 0xf8, 0x16, KEY_6 },
+	{ 0xf8, 0x17, KEY_7 },
+	{ 0xf8, 0x18, KEY_8 },
+	{ 0xf8, 0x19, KEY_9 },
+	{ 0xf8, 0x10, KEY_0 },
+	{ 0xf8, 0x1c, KEY_MENU },
+	{ 0xf8, 0x0f, KEY_VOLUMEDOWN },
+	{ 0xf8, 0x1a, KEY_LAST },
+	{ 0xf8, 0x0e, KEY_OPEN },
+	{ 0xf8, 0x04, KEY_RECORD },
+	{ 0xf8, 0x09, KEY_VOLUMEUP },
+	{ 0xf8, 0x08, KEY_CHANNELUP },
+	{ 0xf8, 0x07, KEY_PVR },
+	{ 0xf8, 0x0b, KEY_TIME },
+	{ 0xf8, 0x02, KEY_RIGHT },
+	{ 0xf8, 0x03, KEY_LEFT },
+	{ 0xf8, 0x00, KEY_UP },
+	{ 0xf8, 0x1f, KEY_OK },
+	{ 0xf8, 0x01, KEY_DOWN },
+	{ 0xf8, 0x05, KEY_TUNER },
+	{ 0xf8, 0x06, KEY_CHANNELDOWN },
+	{ 0xf8, 0x40, KEY_PLAYPAUSE },
+	{ 0xf8, 0x1e, KEY_REWIND },
+	{ 0xf8, 0x1b, KEY_FAVORITES },
+	{ 0xf8, 0x1d, KEY_BACK },
+	{ 0xf8, 0x4d, KEY_FASTFORWARD },
+	{ 0xf8, 0x44, KEY_EPG },
+	{ 0xf8, 0x4c, KEY_INFO },
+	{ 0xf8, 0x41, KEY_AB },
+	{ 0xf8, 0x43, KEY_AUDIO },
+	{ 0xf8, 0x45, KEY_SUBTITLE },
+	{ 0xf8, 0x4a, KEY_LIST },
+	{ 0xf8, 0x46, KEY_F1 },
+	{ 0xf8, 0x47, KEY_F2 },
+	{ 0xf8, 0x5e, KEY_F3 },
+	{ 0xf8, 0x5c, KEY_F4 },
+	{ 0xf8, 0x52, KEY_F5 },
+	{ 0xf8, 0x5a, KEY_F6 },
+	{ 0xf8, 0x56, KEY_MODE },
+	{ 0xf8, 0x58, KEY_SWITCHVIDEOMODE },
 };
 
+static struct dvb_usb_rc_key tbs_rc_keys[] = {
+	{ 0xf8,	0x84, KEY_POWER },
+	{ 0xf8,	0x94, KEY_MUTE },
+	{ 0xf8,	0x87, KEY_1 },
+	{ 0xf8,	0x86, KEY_2 },
+	{ 0xf8,	0x85, KEY_3 },
+	{ 0xf8,	0x8b, KEY_4 },
+	{ 0xf8,	0x8a, KEY_5 },
+	{ 0xf8,	0x89, KEY_6 },
+	{ 0xf8,	0x8f, KEY_7 },
+	{ 0xf8,	0x8e, KEY_8 },
+	{ 0xf8,	0x8d, KEY_9 },
+	{ 0xf8, 0x92, KEY_0 },
+	{ 0xf8, 0x96, KEY_CHANNELUP },
+	{ 0xf8, 0x91, KEY_CHANNELDOWN },
+	{ 0xf8, 0x93, KEY_VOLUMEUP },
+	{ 0xf8, 0x8c, KEY_VOLUMEDOWN },
+	{ 0xf8, 0x83, KEY_RECORD },
+	{ 0xf8, 0x98, KEY_PAUSE  },
+	{ 0xf8, 0x99, KEY_OK },
+	{ 0xf8, 0x9a, KEY_SHUFFLE },
+	{ 0xf8, 0x81, KEY_UP },
+	{ 0xf8, 0x90, KEY_LEFT },
+	{ 0xf8, 0x82, KEY_RIGHT },
+	{ 0xf8, 0x88, KEY_DOWN },
+	{ 0xf8, 0x95, KEY_FAVORITES },
+	{ 0xf8, 0x97, KEY_SUBTITLE },
+	{ 0xf8, 0x9d, KEY_ZOOM },
+	{ 0xf8, 0x9f, KEY_EXIT },
+	{ 0xf8, 0x9e, KEY_MENU },
+	{ 0xf8, 0x9c, KEY_EPG },
+	{ 0xf8, 0x80, KEY_PREVIOUS },
+	{ 0xf8, 0x9b, KEY_MODE }
+};
 
+static struct dvb_usb_rc_keys_table keys_tables[] = {
+	{ dw210x_rc_keys, ARRAY_SIZE(dw210x_rc_keys) },
+	{ tevii_rc_keys, ARRAY_SIZE(tevii_rc_keys) },
+	{ tbs_rc_keys, ARRAY_SIZE(tbs_rc_keys) },
+};
 
 static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	struct dw210x_state *st = d->priv;
+	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	int keymap_size = d->props.rc_key_map_size;
 	u8 key[2];
-	struct i2c_msg msg[] = {
-		{.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key,
-		.len = 2},
+	struct i2c_msg msg = {
+		.addr = DW2102_RC_QUERY,
+		.flags = I2C_M_RD,
+		.buf = key,
+		.len = 2
 	};
 	int i;
+	/* override keymap */
+	if ((ir_keymap > 0) && (ir_keymap <= ARRAY_SIZE(keys_tables))) {
+		keymap = keys_tables[ir_keymap - 1].rc_keys ;
+		keymap_size = keys_tables[ir_keymap - 1].rc_keys_size;
+	}
 
 	*state = REMOTE_NO_KEY_PRESSED;
-	if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) {
-		for (i = 0; i < ARRAY_SIZE(dw210x_rc_keys); i++) {
-			if (dw210x_rc_keys[i].data == msg[0].buf[0]) {
+	if (dw2102_i2c_transfer(&d->i2c_adap, &msg, 1) == 1) {
+		for (i = 0; i < keymap_size ; i++) {
+			if (keymap[i].data == msg.buf[0]) {
 				*state = REMOTE_KEY_PRESSED;
-				*event = dw210x_rc_keys[i].event;
-				st->last_key_pressed =
-					dw210x_rc_keys[i].event;
+				*event = keymap[i].event;
 				break;
 			}
-		st->last_key_pressed = 0;
+
 		}
+
+		if ((*state) == REMOTE_KEY_PRESSED)
+			deb_rc("%s: found rc key: %x, %x, event: %x\n",
+					__func__, key[0], key[1], (*event));
+		else if (key[0] != 0xff)
+			deb_rc("%s: unknown rc key: %x, %x\n",
+					__func__, key[0], key[1]);
+
 	}
-	/* info("key: %x %x\n",key[0],key[1]); */
+
 	return 0;
 }
 
 static struct usb_device_id dw2102_table[] = {
 	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
 	{USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
-	{USB_DEVICE(USB_VID_CYPRESS, 0x2104)},
-	{USB_DEVICE(0x9022, 0xd650)},
+	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)},
+	{USB_DEVICE(0x9022, USB_PID_TEVII_S650)},
 	{USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)},
+	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)},
 	{ }
 };
 
@@ -642,11 +852,16 @@ static int dw2102_load_firmware(struct usb_device *dev,
 		}
 		/* init registers */
 		switch (dev->descriptor.idProduct) {
+		case USB_PID_TEVII_S650:
+			dw2104_properties.rc_key_map = tevii_rc_keys;
+			dw2104_properties.rc_key_map_size =
+					ARRAY_SIZE(tevii_rc_keys);
 		case USB_PID_DW2104:
-		case 0xd650:
 			reset = 1;
 			dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
 					DW210X_WRITE_MSG);
+			/* break omitted intentionally */
+		case USB_PID_DW3101:
 			reset = 0;
 			dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
 					DW210X_WRITE_MSG);
@@ -690,6 +905,7 @@ static int dw2102_load_firmware(struct usb_device *dev,
 					DW210X_READ_MSG);
 			break;
 		}
+
 		msleep(100);
 		kfree(p);
 	}
@@ -700,7 +916,6 @@ static struct dvb_usb_device_properties dw2102_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
 	.firmware = "dvb-usb-dw2102.fw",
-	.size_of_priv = sizeof(struct dw210x_state),
 	.no_reconnect = 1,
 
 	.i2c_algo = &dw2102_serit_i2c_algo,
@@ -714,7 +929,7 @@ static struct dvb_usb_device_properties dw2102_properties = {
 	.num_adapters = 1,
 	.download_firmware = dw2102_load_firmware,
 	.read_mac_address = dw210x_read_mac_address,
-		.adapter = {
+	.adapter = {
 		{
 			.frontend_attach = dw2102_frontend_attach,
 			.streaming_ctrl = NULL,
@@ -752,7 +967,6 @@ static struct dvb_usb_device_properties dw2104_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
 	.firmware = "dvb-usb-dw2104.fw",
-	.size_of_priv = sizeof(struct dw210x_state),
 	.no_reconnect = 1,
 
 	.i2c_algo = &dw2104_i2c_algo,
@@ -796,12 +1010,57 @@ static struct dvb_usb_device_properties dw2104_properties = {
 	}
 };
 
+static struct dvb_usb_device_properties dw3101_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.firmware = "dvb-usb-dw3101.fw",
+	.no_reconnect = 1,
+
+	.i2c_algo = &dw3101_i2c_algo,
+	.rc_key_map = dw210x_rc_keys,
+	.rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys),
+	.rc_interval = 150,
+	.rc_query = dw2102_rc_query,
+
+	.generic_bulk_ctrl_endpoint = 0x81,
+	/* parameter for the MPEG2-data transfer */
+	.num_adapters = 1,
+	.download_firmware = dw2102_load_firmware,
+	.read_mac_address = dw210x_read_mac_address,
+	.adapter = {
+		{
+			.frontend_attach = dw3101_frontend_attach,
+			.streaming_ctrl = NULL,
+			.tuner_attach = dw3101_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
+		}
+	},
+	.num_device_descs = 1,
+	.devices = {
+		{ "DVBWorld DVB-C 3101 USB2.0",
+			{&dw2102_table[5], NULL},
+			{NULL},
+		},
+	}
+};
+
 static int dw2102_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
 {
 	if (0 == dvb_usb_device_init(intf, &dw2102_properties,
 			THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &dw2104_properties,
+			THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &dw3101_properties,
 			THIS_MODULE, NULL, adapter_nr)) {
 		return 0;
 	}
@@ -833,6 +1092,8 @@ module_init(dw2102_module_init);
 module_exit(dw2102_module_exit);
 
 MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
-MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104 USB2.0 device");
+MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
+				" DVB-C 3101 USB2.0,"
+				" TeVii S600, S650 USB2.0 devices");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/dw2102.h b/drivers/media/dvb/dvb-usb/dw2102.h
index e3370734e95..5cd0b0eb6ce 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.h
+++ b/drivers/media/dvb/dvb-usb/dw2102.h
@@ -5,4 +5,5 @@
 #include "dvb-usb.h"
 
 #define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_dw2102_debug, 0x04, args)
 #endif
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index 3dd6843864e..afb444db43a 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -223,7 +223,7 @@ static struct usb_device_id gp8psk_usb_table [] = {
 	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },
 	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },
 	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },
-	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) },
+/*	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */
 	    { 0 },
 };
 MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
@@ -254,7 +254,7 @@ static struct dvb_usb_device_properties gp8psk_properties = {
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.num_device_descs = 4,
+	.num_device_descs = 3,
 	.devices = {
 		{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
 		  .cold_ids = { &gp8psk_usb_table[0], NULL },
@@ -268,10 +268,6 @@ static struct dvb_usb_device_properties gp8psk_properties = {
 		  .cold_ids = { NULL },
 		  .warm_ids = { &gp8psk_usb_table[3], NULL },
 		},
-		{ .name = "Genpix SkyWalker-CW3K DVB-S receiver",
-		  .cold_ids = { NULL },
-		  .warm_ids = { &gp8psk_usb_table[4], NULL },
-		},
 		{ NULL },
 	}
 };
diff --git a/drivers/media/dvb/firewire/firedtv-1394.c b/drivers/media/dvb/firewire/firedtv-1394.c
index 4e207658c5d..2b6eeeab5b2 100644
--- a/drivers/media/dvb/firewire/firedtv-1394.c
+++ b/drivers/media/dvb/firewire/firedtv-1394.c
@@ -225,7 +225,7 @@ fail_free:
 
 static int node_remove(struct device *dev)
 {
-	struct firedtv *fdtv = dev->driver_data;
+	struct firedtv *fdtv = dev_get_drvdata(dev);
 
 	fdtv_dvb_unregister(fdtv);
 
@@ -242,7 +242,7 @@ static int node_remove(struct device *dev)
 
 static int node_update(struct unit_directory *ud)
 {
-	struct firedtv *fdtv = ud->device.driver_data;
+	struct firedtv *fdtv = dev_get_drvdata(&ud->device);
 
 	if (fdtv->isochannel >= 0)
 		cmp_establish_pp_connection(fdtv, fdtv->subunit,
diff --git a/drivers/media/dvb/firewire/firedtv-dvb.c b/drivers/media/dvb/firewire/firedtv-dvb.c
index 9d308dd32a5..5742fde79d9 100644
--- a/drivers/media/dvb/firewire/firedtv-dvb.c
+++ b/drivers/media/dvb/firewire/firedtv-dvb.c
@@ -268,7 +268,7 @@ struct firedtv *fdtv_alloc(struct device *dev,
 	if (!fdtv)
 		return NULL;
 
-	dev->driver_data	= fdtv;
+	dev_set_drvdata(dev, fdtv);
 	fdtv->device		= dev;
 	fdtv->isochannel	= -1;
 	fdtv->voltage		= 0xff;
diff --git a/drivers/media/dvb/firewire/firedtv-rc.c b/drivers/media/dvb/firewire/firedtv-rc.c
index 46a6324d7b7..27bca2e283d 100644
--- a/drivers/media/dvb/firewire/firedtv-rc.c
+++ b/drivers/media/dvb/firewire/firedtv-rc.c
@@ -18,7 +18,7 @@
 #include "firedtv.h"
 
 /* fixed table with older keycodes, geared towards MythTV */
-const static u16 oldtable[] = {
+static const u16 oldtable[] = {
 
 	/* code from device: 0x4501...0x451f */
 
@@ -62,7 +62,7 @@ const static u16 oldtable[] = {
 };
 
 /* user-modifiable table for a remote as sold in 2008 */
-const static u16 keytable[] = {
+static const u16 keytable[] = {
 
 	/* code from device: 0x0300...0x031f */
 
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 23e4cffeba3..be967ac09a3 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -35,6 +35,21 @@ config DVB_STB6100
 	  A Silicon tuner from ST used in conjunction with the STB0899
 	  demodulator. Say Y when you want to support this tuner.
 
+config DVB_STV090x
+	tristate "STV0900/STV0903(A/B) based"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators.
+	  Say Y when you want to support these frontends.
+
+config DVB_STV6110x
+	tristate "STV6110/(A) based tuners"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A Silicon tuner that supports DVB-S and DVB-S2 modes
+
 comment "DVB-S (satellite) frontends"
 	depends on DVB_CORE
 
@@ -506,6 +521,13 @@ config DVB_ISL6421
 	help
 	  An SEC control chip.
 
+config DVB_ISL6423
+	tristate "ISL6423 SEC controller"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A SEC controller chip from Intersil
+
 config DVB_LGS8GL5
 	tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)"
 	depends on DVB_CORE && I2C
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index bc2b00abd10..832473c1e51 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -71,4 +71,6 @@ obj-$(CONFIG_DVB_STB6000) += stb6000.o
 obj-$(CONFIG_DVB_S921) += s921.o
 obj-$(CONFIG_DVB_STV6110) += stv6110.o
 obj-$(CONFIG_DVB_STV0900) += stv0900.o
-
+obj-$(CONFIG_DVB_STV090x) += stv090x.o
+obj-$(CONFIG_DVB_STV6110x) += stv6110x.o
+obj-$(CONFIG_DVB_ISL6423) += isl6423.o
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index b2b50fb4cfd..136c5863d81 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -1455,7 +1455,7 @@ static int af9013_download_firmware(struct af9013_state *state)
 		af9013_ops.info.name);
 
 	/* request the firmware, this will block and timeout */
-	ret = request_firmware(&fw, fw_file,  &state->i2c->dev);
+	ret = request_firmware(&fw, fw_file, state->i2c->dev.parent);
 	if (ret) {
 		err("did not find the firmware file. (%s) "
 			"Please see linux/Documentation/dvb/ for more details" \
diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c
index 35731258bb0..956b80f4979 100644
--- a/drivers/media/dvb/frontends/au8522_dig.c
+++ b/drivers/media/dvb/frontends/au8522_dig.c
@@ -367,11 +367,90 @@ static struct {
 	{ 0x8231, 0x13 },
 };
 
-/* QAM Modulation table */
+/* QAM64 Modulation table */
 static struct {
 	u16 reg;
 	u16 data;
-} QAM_mod_tab[] = {
+} QAM64_mod_tab[] = {
+	{ 0x00a3, 0x09 },
+	{ 0x00a4, 0x00 },
+	{ 0x0081, 0xc4 },
+	{ 0x00a5, 0x40 },
+	{ 0x00aa, 0x77 },
+	{ 0x00ad, 0x77 },
+	{ 0x00a6, 0x67 },
+	{ 0x0262, 0x20 },
+	{ 0x021c, 0x30 },
+	{ 0x00b8, 0x3e },
+	{ 0x00b9, 0xf0 },
+	{ 0x00ba, 0x01 },
+	{ 0x00bb, 0x18 },
+	{ 0x00bc, 0x50 },
+	{ 0x00bd, 0x00 },
+	{ 0x00be, 0xea },
+	{ 0x00bf, 0xef },
+	{ 0x00c0, 0xfc },
+	{ 0x00c1, 0xbd },
+	{ 0x00c2, 0x1f },
+	{ 0x00c3, 0xfc },
+	{ 0x00c4, 0xdd },
+	{ 0x00c5, 0xaf },
+	{ 0x00c6, 0x00 },
+	{ 0x00c7, 0x38 },
+	{ 0x00c8, 0x30 },
+	{ 0x00c9, 0x05 },
+	{ 0x00ca, 0x4a },
+	{ 0x00cb, 0xd0 },
+	{ 0x00cc, 0x01 },
+	{ 0x00cd, 0xd9 },
+	{ 0x00ce, 0x6f },
+	{ 0x00cf, 0xf9 },
+	{ 0x00d0, 0x70 },
+	{ 0x00d1, 0xdf },
+	{ 0x00d2, 0xf7 },
+	{ 0x00d3, 0xc2 },
+	{ 0x00d4, 0xdf },
+	{ 0x00d5, 0x02 },
+	{ 0x00d6, 0x9a },
+	{ 0x00d7, 0xd0 },
+	{ 0x0250, 0x0d },
+	{ 0x0251, 0xcd },
+	{ 0x0252, 0xe0 },
+	{ 0x0253, 0x05 },
+	{ 0x0254, 0xa7 },
+	{ 0x0255, 0xff },
+	{ 0x0256, 0xed },
+	{ 0x0257, 0x5b },
+	{ 0x0258, 0xae },
+	{ 0x0259, 0xe6 },
+	{ 0x025a, 0x3d },
+	{ 0x025b, 0x0f },
+	{ 0x025c, 0x0d },
+	{ 0x025d, 0xea },
+	{ 0x025e, 0xf2 },
+	{ 0x025f, 0x51 },
+	{ 0x0260, 0xf5 },
+	{ 0x0261, 0x06 },
+	{ 0x021a, 0x00 },
+	{ 0x0546, 0x40 },
+	{ 0x0210, 0xc7 },
+	{ 0x0211, 0xaa },
+	{ 0x0212, 0xab },
+	{ 0x0213, 0x02 },
+	{ 0x0502, 0x00 },
+	{ 0x0121, 0x04 },
+	{ 0x0122, 0x04 },
+	{ 0x052e, 0x10 },
+	{ 0x00a4, 0xca },
+	{ 0x00a7, 0x40 },
+	{ 0x0526, 0x01 },
+};
+
+/* QAM256 Modulation table */
+static struct {
+	u16 reg;
+	u16 data;
+} QAM256_mod_tab[] = {
 	{ 0x80a3, 0x09 },
 	{ 0x80a4, 0x00 },
 	{ 0x8081, 0xc4 },
@@ -464,12 +543,19 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 		au8522_set_if(fe, state->config->vsb_if);
 		break;
 	case QAM_64:
+		dprintk("%s() QAM 64\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(QAM64_mod_tab); i++)
+			au8522_writereg(state,
+				QAM64_mod_tab[i].reg,
+				QAM64_mod_tab[i].data);
+		au8522_set_if(fe, state->config->qam_if);
+		break;
 	case QAM_256:
-		dprintk("%s() QAM 64/256\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(QAM_mod_tab); i++)
+		dprintk("%s() QAM 256\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(QAM256_mod_tab); i++)
 			au8522_writereg(state,
-				QAM_mod_tab[i].reg,
-				QAM_mod_tab[i].data);
+				QAM256_mod_tab[i].reg,
+				QAM256_mod_tab[i].data);
 		au8522_set_if(fe, state->config->qam_if);
 		break;
 	default:
diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c
index 9b9f57264ce..2410d8b59b6 100644
--- a/drivers/media/dvb/frontends/cx24116.c
+++ b/drivers/media/dvb/frontends/cx24116.c
@@ -492,7 +492,7 @@ static int cx24116_firmware_ondemand(struct dvb_frontend *fe)
 		printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n",
 			__func__, CX24116_DEFAULT_FIRMWARE);
 		ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE,
-			&state->i2c->dev);
+			state->i2c->dev.parent);
 		printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n",
 			__func__);
 		if (ret) {
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index 172f1f928f0..01007553522 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -123,10 +123,10 @@ static int drx_load_fw(struct drx397xD_state *s, enum fw_ix ix)
 	}
 	memset(&fw[ix].data[0], 0, sizeof(fw[0].data));
 
-	if (request_firmware(&fw[ix].file, fw[ix].name, &s->i2c->dev) != 0) {
+	rc = request_firmware(&fw[ix].file, fw[ix].name, s->i2c->dev.parent);
+	if (rc != 0) {
 		printk(KERN_ERR "%s: Firmware \"%s\" not available\n",
 		       mod_name, fw[ix].name);
-		rc = -ENOENT;
 		goto exit_err;
 	}
 
diff --git a/drivers/media/dvb/frontends/isl6423.c b/drivers/media/dvb/frontends/isl6423.c
new file mode 100644
index 00000000000..dca5bebfeeb
--- /dev/null
+++ b/drivers/media/dvb/frontends/isl6423.c
@@ -0,0 +1,308 @@
+/*
+	Intersil ISL6423 SEC and LNB Power supply controller
+
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "dvb_frontend.h"
+#include "isl6423.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "Set Verbosity level");
+
+#define FE_ERROR				0
+#define FE_NOTICE				1
+#define FE_INFO					2
+#define FE_DEBUG				3
+#define FE_DEBUGREG				4
+
+#define dprintk(__y, __z, format, arg...) do {						\
+	if (__z) {									\
+		if	((verbose > FE_ERROR) && (verbose > __y))			\
+			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
+		else if	((verbose > FE_NOTICE) && (verbose > __y))			\
+			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
+		else if ((verbose > FE_INFO) && (verbose > __y))			\
+			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
+		else if ((verbose > FE_DEBUG) && (verbose > __y))			\
+			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
+	} else {									\
+		if (verbose > __y)							\
+			printk(format, ##arg);						\
+	}										\
+} while (0)
+
+struct isl6423_dev {
+	const struct isl6423_config	*config;
+	struct i2c_adapter		*i2c;
+
+	u8 reg_3;
+	u8 reg_4;
+
+	unsigned int verbose;
+};
+
+static int isl6423_write(struct isl6423_dev *isl6423, u8 reg)
+{
+	struct i2c_adapter *i2c = isl6423->i2c;
+	u8 addr			= isl6423->config->addr;
+	int err = 0;
+
+	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = &reg, .len = 1 };
+
+	dprintk(FE_DEBUG, 1, "write reg %02X", reg);
+	err = i2c_transfer(i2c, &msg, 1);
+	if (err < 0)
+		goto exit;
+	return 0;
+
+exit:
+	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
+	return err;
+}
+
+static int isl6423_set_modulation(struct dvb_frontend *fe)
+{
+	struct isl6423_dev *isl6423		= (struct isl6423_dev *) fe->sec_priv;
+	const struct isl6423_config *config	= isl6423->config;
+	int err = 0;
+	u8 reg_2 = 0;
+
+	reg_2 = 0x01 << 5;
+
+	if (config->mod_extern)
+		reg_2 |= (1 << 3);
+	else
+		reg_2 |= (1 << 4);
+
+	err = isl6423_write(isl6423, reg_2);
+	if (err < 0)
+		goto exit;
+	return 0;
+
+exit:
+	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
+	return err;
+}
+
+static int isl6423_voltage_boost(struct dvb_frontend *fe, long arg)
+{
+	struct isl6423_dev *isl6423 = (struct isl6423_dev *) fe->sec_priv;
+	u8 reg_3 = isl6423->reg_3;
+	u8 reg_4 = isl6423->reg_4;
+	int err = 0;
+
+	if (arg) {
+		/* EN = 1, VSPEN = 1, VBOT = 1 */
+		reg_4 |= (1 << 4);
+		reg_4 |= 0x1;
+		reg_3 |= (1 << 3);
+	} else {
+		/* EN = 1, VSPEN = 1, VBOT = 0 */
+		reg_4 |= (1 << 4);
+		reg_4 &= ~0x1;
+		reg_3 |= (1 << 3);
+	}
+	err = isl6423_write(isl6423, reg_3);
+	if (err < 0)
+		goto exit;
+
+	err = isl6423_write(isl6423, reg_4);
+	if (err < 0)
+		goto exit;
+
+	isl6423->reg_3 = reg_3;
+	isl6423->reg_4 = reg_4;
+
+	return 0;
+exit:
+	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
+	return err;
+}
+
+
+static int isl6423_set_voltage(struct dvb_frontend *fe,
+			       enum fe_sec_voltage voltage)
+{
+	struct isl6423_dev *isl6423 = (struct isl6423_dev *) fe->sec_priv;
+	u8 reg_3 = isl6423->reg_3;
+	u8 reg_4 = isl6423->reg_4;
+	int err = 0;
+
+	switch (voltage) {
+	case SEC_VOLTAGE_OFF:
+		/* EN = 0 */
+		reg_4 &= ~(1 << 4);
+		break;
+
+	case SEC_VOLTAGE_13:
+		/* EN = 1, VSPEN = 1, VTOP = 0, VBOT = 0 */
+		reg_4 |= (1 << 4);
+		reg_4 &= ~0x3;
+		reg_3 |= (1 << 3);
+		break;
+
+	case SEC_VOLTAGE_18:
+		/* EN = 1, VSPEN = 1, VTOP = 1, VBOT = 0 */
+		reg_4 |= (1 << 4);
+		reg_4 |=  0x2;
+		reg_4 &= ~0x1;
+		reg_3 |= (1 << 3);
+		break;
+
+	default:
+		break;
+	}
+	err = isl6423_write(isl6423, reg_3);
+	if (err < 0)
+		goto exit;
+
+	err = isl6423_write(isl6423, reg_4);
+	if (err < 0)
+		goto exit;
+
+	isl6423->reg_3 = reg_3;
+	isl6423->reg_4 = reg_4;
+
+	return 0;
+exit:
+	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
+	return err;
+}
+
+static int isl6423_set_current(struct dvb_frontend *fe)
+{
+	struct isl6423_dev *isl6423		= (struct isl6423_dev *) fe->sec_priv;
+	u8 reg_3 = isl6423->reg_3;
+	const struct isl6423_config *config	= isl6423->config;
+	int err = 0;
+
+	switch (config->current_max) {
+	case SEC_CURRENT_275m:
+		/* 275mA */
+		/* ISELH = 0, ISELL = 0 */
+		reg_3 &= ~0x3;
+		break;
+
+	case SEC_CURRENT_515m:
+		/* 515mA */
+		/* ISELH = 0, ISELL = 1 */
+		reg_3 &= ~0x2;
+		reg_3 |=  0x1;
+		break;
+
+	case SEC_CURRENT_635m:
+		/* 635mA */
+		/* ISELH = 1, ISELL = 0 */
+		reg_3 &= ~0x1;
+		reg_3 |=  0x2;
+		break;
+
+	case SEC_CURRENT_800m:
+		/* 800mA */
+		/* ISELH = 1, ISELL = 1 */
+		reg_3 |= 0x3;
+		break;
+	}
+
+	err = isl6423_write(isl6423, reg_3);
+	if (err < 0)
+		goto exit;
+
+	switch (config->curlim) {
+	case SEC_CURRENT_LIM_ON:
+		/* DCL = 0 */
+		reg_3 &= ~0x10;
+		break;
+
+	case SEC_CURRENT_LIM_OFF:
+		/* DCL = 1 */
+		reg_3 |= 0x10;
+		break;
+	}
+
+	err = isl6423_write(isl6423, reg_3);
+	if (err < 0)
+		goto exit;
+
+	isl6423->reg_3 = reg_3;
+
+	return 0;
+exit:
+	dprintk(FE_ERROR, 1, "I/O error <%d>", err);
+	return err;
+}
+
+static void isl6423_release(struct dvb_frontend *fe)
+{
+	isl6423_set_voltage(fe, SEC_VOLTAGE_OFF);
+
+	kfree(fe->sec_priv);
+	fe->sec_priv = NULL;
+}
+
+struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe,
+				    struct i2c_adapter *i2c,
+				    const struct isl6423_config *config)
+{
+	struct isl6423_dev *isl6423;
+
+	isl6423 = kzalloc(sizeof(struct isl6423_dev), GFP_KERNEL);
+	if (!isl6423)
+		return NULL;
+
+	isl6423->config	= config;
+	isl6423->i2c	= i2c;
+	fe->sec_priv	= isl6423;
+
+	/* SR3H = 0, SR3M = 1, SR3L = 0 */
+	isl6423->reg_3 = 0x02 << 5;
+	/* SR4H = 0, SR4M = 1, SR4L = 1 */
+	isl6423->reg_4 = 0x03 << 5;
+
+	if (isl6423_set_current(fe))
+		goto exit;
+
+	if (isl6423_set_modulation(fe))
+		goto exit;
+
+	fe->ops.release_sec		= isl6423_release;
+	fe->ops.set_voltage		= isl6423_set_voltage;
+	fe->ops.enable_high_lnb_voltage = isl6423_voltage_boost;
+	isl6423->verbose		= verbose;
+
+	return fe;
+
+exit:
+	kfree(isl6423);
+	fe->sec_priv = NULL;
+	return NULL;
+}
+EXPORT_SYMBOL(isl6423_attach);
+
+MODULE_DESCRIPTION("ISL6423 SEC");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/isl6423.h b/drivers/media/dvb/frontends/isl6423.h
new file mode 100644
index 00000000000..e1a37fba01c
--- /dev/null
+++ b/drivers/media/dvb/frontends/isl6423.h
@@ -0,0 +1,63 @@
+/*
+	Intersil ISL6423 SEC and LNB Power supply controller
+
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ISL_6423_H
+#define __ISL_6423_H
+
+#include <linux/dvb/frontend.h>
+
+enum isl6423_current {
+	SEC_CURRENT_275m = 0,
+	SEC_CURRENT_515m,
+	SEC_CURRENT_635m,
+	SEC_CURRENT_800m,
+};
+
+enum isl6423_curlim {
+	SEC_CURRENT_LIM_ON = 1,
+	SEC_CURRENT_LIM_OFF
+};
+
+struct isl6423_config {
+	enum isl6423_current current_max;
+	enum isl6423_curlim curlim;
+	u8 addr;
+	u8 mod_extern;
+};
+
+#if defined(CONFIG_DVB_ISL6423) || (defined(CONFIG_DVB_ISL6423_MODULE) && defined(MODULE))
+
+
+extern struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe,
+					   struct i2c_adapter *i2c,
+					   const struct isl6423_config *config);
+
+#else
+static inline struct dvb_frontend *isl6423_attach(struct dvb_frontend *fe,
+						  struct i2c_adapter *i2c,
+						  const struct isl6423_config *config)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+#endif /* CONFIG_DVB_ISL6423 */
+
+#endif /* __ISL_6423_H */
diff --git a/drivers/media/dvb/frontends/lgdt3305.c b/drivers/media/dvb/frontends/lgdt3305.c
index d92d0557a80..fde8c59700f 100644
--- a/drivers/media/dvb/frontends/lgdt3305.c
+++ b/drivers/media/dvb/frontends/lgdt3305.c
@@ -19,6 +19,7 @@
  *
  */
 
+#include <asm/div64.h>
 #include <linux/dvb/frontend.h>
 #include "dvb_math.h"
 #include "lgdt3305.h"
@@ -496,27 +497,15 @@ static int lgdt3305_set_if(struct lgdt3305_state *state,
 
 	nco = if_freq_khz / 10;
 
-#define LGDT3305_64BIT_DIVISION_ENABLED 0
-	/* FIXME: 64bit division disabled to avoid linking error:
-	 * WARNING: "__udivdi3" [lgdt3305.ko] undefined!
-	 */
 	switch (param->u.vsb.modulation) {
 	case VSB_8:
-#if LGDT3305_64BIT_DIVISION_ENABLED
 		nco <<= 24;
-		nco /= 625;
-#else
-		nco *= ((1 << 24) / 625);
-#endif
+		do_div(nco, 625);
 		break;
 	case QAM_64:
 	case QAM_256:
-#if LGDT3305_64BIT_DIVISION_ENABLED
 		nco <<= 28;
-		nco /= 625;
-#else
-		nco *= ((1 << 28) / 625);
-#endif
+		do_div(nco, 625);
 		break;
 	default:
 		return -EINVAL;
diff --git a/drivers/media/dvb/frontends/lgs8gxx.c b/drivers/media/dvb/frontends/lgs8gxx.c
index f9785dfe735..fde27645bbe 100644
--- a/drivers/media/dvb/frontends/lgs8gxx.c
+++ b/drivers/media/dvb/frontends/lgs8gxx.c
@@ -37,14 +37,14 @@
 	} while (0)
 
 static int debug;
-static int fake_signal_str;
+static int fake_signal_str = 1;
 
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
 module_param(fake_signal_str, int, 0644);
 MODULE_PARM_DESC(fake_signal_str, "fake signal strength for LGS8913."
-"Signal strength calculation is slow.(default:off).");
+"Signal strength calculation is slow.(default:on).");
 
 /* LGS8GXX internal helper functions */
 
@@ -610,7 +610,7 @@ static int lgs8gxx_read_signal_agc(struct lgs8gxx_state *priv, u16 *signal)
 	else
 		cat = 0;
 
-	*signal = cat;
+	*signal = cat * 65535 / 5;
 
 	return 0;
 }
@@ -630,8 +630,8 @@ static int lgs8913_read_signal_strength(struct lgs8gxx_state *priv, u16 *signal)
 
 	if (fake_signal_str) {
 		if ((t & 0xC0) == 0xC0) {
-			dprintk("Fake signal strength as 50\n");
-			*signal = 0x32;
+			dprintk("Fake signal strength\n");
+			*signal = 0x7FFF;
 		} else
 			*signal = 0;
 		return 0;
diff --git a/drivers/media/dvb/frontends/lnbp21.c b/drivers/media/dvb/frontends/lnbp21.c
index 1dcc56f32bf..71f607fe8fc 100644
--- a/drivers/media/dvb/frontends/lnbp21.c
+++ b/drivers/media/dvb/frontends/lnbp21.c
@@ -133,7 +133,7 @@ static struct dvb_frontend *lnbx2x_attach(struct dvb_frontend *fe,
 	/* override frontend ops */
 	fe->ops.set_voltage = lnbp21_set_voltage;
 	fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
-	printk(KERN_INFO "LNBx2x attached on addr=%x", lnbp21->i2c_addr);
+	printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr);
 
 	return fe;
 }
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 5ac9b15920f..a621f727935 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -77,7 +77,7 @@ static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
 	ret = i2c_transfer(state->i2c, msg, 2);
 
 	if (ret != 2) {
-		printk(KERN_ERR "%s: ret == %d\n", __func__, ret);
+		printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
 		return -EREMOTEIO;
 	}
 
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index a8429ebfa8a..eac20650499 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -879,7 +879,8 @@ static int nxt2002_init(struct dvb_frontend* fe)
 
 	/* request the firmware, this will block until someone uploads it */
 	printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
-	ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE, &state->i2c->dev);
+	ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE,
+			       state->i2c->dev.parent);
 	printk("nxt2002: Waiting for firmware upload(2)...\n");
 	if (ret) {
 		printk("nxt2002: No firmware uploaded (timeout or file not found?)\n");
@@ -943,7 +944,8 @@ static int nxt2004_init(struct dvb_frontend* fe)
 
 	/* request the firmware, this will block until someone uploads it */
 	printk("nxt2004: Waiting for firmware upload (%s)...\n", NXT2004_DEFAULT_FIRMWARE);
-	ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE, &state->i2c->dev);
+	ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE,
+			       state->i2c->dev.parent);
 	printk("nxt2004: Waiting for firmware upload(2)...\n");
 	if (ret) {
 		printk("nxt2004: No firmware uploaded (timeout or file not found?)\n");
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index 5ed32544de3..8133ea3cddd 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -340,7 +340,7 @@ static int or51132_set_parameters(struct dvb_frontend* fe,
 		}
 		printk("or51132: Waiting for firmware upload(%s)...\n",
 		       fwname);
-		ret = request_firmware(&fw, fwname, &state->i2c->dev);
+		ret = request_firmware(&fw, fwname, state->i2c->dev.parent);
 		if (ret) {
 			printk(KERN_WARNING "or51132: No firmware up"
 			       "loaded(timeout or file not found?)\n");
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index 762d5af62d7..67dc8ec634e 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -60,8 +60,6 @@
 		} \
 	} while (0)
 
-#define dmd_choose(a, b)	(demod = STV0900_DEMOD_2 ? b : a))
-
 static int stvdebug;
 
 #define dprintk(args...) \
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
new file mode 100644
index 00000000000..96ef745a2e4
--- /dev/null
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -0,0 +1,4299 @@
+/*
+	STV0900/0903 Multistandard Broadcast Frontend driver
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/mutex.h>
+
+#include <linux/dvb/frontend.h>
+#include "dvb_frontend.h"
+
+#include "stv6110x.h" /* for demodulator internal modes */
+
+#include "stv090x_reg.h"
+#include "stv090x.h"
+#include "stv090x_priv.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+
+struct mutex demod_lock;
+
+/* DVBS1 and DSS C/N Lookup table */
+static const struct stv090x_tab stv090x_s1cn_tab[] = {
+	{   0, 8917 }, /*  0.0dB */
+	{   5, 8801 }, /*  0.5dB */
+	{  10, 8667 }, /*  1.0dB */
+	{  15, 8522 }, /*  1.5dB */
+	{  20, 8355 }, /*  2.0dB */
+	{  25, 8175 }, /*  2.5dB */
+	{  30, 7979 }, /*  3.0dB */
+	{  35, 7763 }, /*  3.5dB */
+	{  40, 7530 }, /*  4.0dB */
+	{  45, 7282 }, /*  4.5dB */
+	{  50, 7026 }, /*  5.0dB */
+	{  55, 6781 }, /*  5.5dB */
+	{  60, 6514 }, /*  6.0dB */
+	{  65, 6241 }, /*  6.5dB */
+	{  70, 5965 }, /*  7.0dB */
+	{  75, 5690 }, /*  7.5dB */
+	{  80, 5424 }, /*  8.0dB */
+	{  85, 5161 }, /*  8.5dB */
+	{  90, 4902 }, /*  9.0dB */
+	{  95, 4654 }, /*  9.5dB */
+	{ 100, 4417 }, /* 10.0dB */
+	{ 105, 4186 }, /* 10.5dB */
+	{ 110, 3968 }, /* 11.0dB */
+	{ 115, 3757 }, /* 11.5dB */
+	{ 120, 3558 }, /* 12.0dB */
+	{ 125, 3366 }, /* 12.5dB */
+	{ 130, 3185 }, /* 13.0dB */
+	{ 135, 3012 }, /* 13.5dB */
+	{ 140, 2850 }, /* 14.0dB */
+	{ 145, 2698 }, /* 14.5dB */
+	{ 150, 2550 }, /* 15.0dB */
+	{ 160, 2283 }, /* 16.0dB */
+	{ 170, 2042 }, /* 17.0dB */
+	{ 180, 1827 }, /* 18.0dB */
+	{ 190, 1636 }, /* 19.0dB */
+	{ 200, 1466 }, /* 20.0dB */
+	{ 210, 1315 }, /* 21.0dB */
+	{ 220, 1181 }, /* 22.0dB */
+	{ 230, 1064 }, /* 23.0dB */
+	{ 240,	960 }, /* 24.0dB */
+	{ 250,	869 }, /* 25.0dB */
+	{ 260,	792 }, /* 26.0dB */
+	{ 270,	724 }, /* 27.0dB */
+	{ 280,	665 }, /* 28.0dB */
+	{ 290,	616 }, /* 29.0dB */
+	{ 300,	573 }, /* 30.0dB */
+	{ 310,	537 }, /* 31.0dB */
+	{ 320,	507 }, /* 32.0dB */
+	{ 330,	483 }, /* 33.0dB */
+	{ 400,	398 }, /* 40.0dB */
+	{ 450,	381 }, /* 45.0dB */
+	{ 500,	377 }  /* 50.0dB */
+};
+
+/* DVBS2 C/N Lookup table */
+static const struct stv090x_tab stv090x_s2cn_tab[] = {
+	{ -30, 13348 }, /* -3.0dB */
+	{ -20, 12640 }, /* -2d.0B */
+	{ -10, 11883 }, /* -1.0dB */
+	{   0, 11101 }, /* -0.0dB */
+	{   5, 10718 }, /*  0.5dB */
+	{  10, 10339 }, /*  1.0dB */
+	{  15,  9947 }, /*  1.5dB */
+	{  20,  9552 }, /*  2.0dB */
+	{  25,  9183 }, /*  2.5dB */
+	{  30,  8799 }, /*  3.0dB */
+	{  35,  8422 }, /*  3.5dB */
+	{  40,  8062 }, /*  4.0dB */
+	{  45,  7707 }, /*  4.5dB */
+	{  50,  7353 }, /*  5.0dB */
+	{  55,  7025 }, /*  5.5dB */
+	{  60,  6684 }, /*  6.0dB */
+	{  65,  6331 }, /*  6.5dB */
+	{  70,  6036 }, /*  7.0dB */
+	{  75,  5727 }, /*  7.5dB */
+	{  80,  5437 }, /*  8.0dB */
+	{  85,  5164 }, /*  8.5dB */
+	{  90,  4902 }, /*  9.0dB */
+	{  95,  4653 }, /*  9.5dB */
+	{ 100,  4408 }, /* 10.0dB */
+	{ 105,  4187 }, /* 10.5dB */
+	{ 110,  3961 }, /* 11.0dB */
+	{ 115,  3751 }, /* 11.5dB */
+	{ 120,  3558 }, /* 12.0dB */
+	{ 125,  3368 }, /* 12.5dB */
+	{ 130,  3191 }, /* 13.0dB */
+	{ 135,  3017 }, /* 13.5dB */
+	{ 140,  2862 }, /* 14.0dB */
+	{ 145,  2710 }, /* 14.5dB */
+	{ 150,  2565 }, /* 15.0dB */
+	{ 160,  2300 }, /* 16.0dB */
+	{ 170,  2058 }, /* 17.0dB */
+	{ 180,  1849 }, /* 18.0dB */
+	{ 190,  1663 }, /* 19.0dB */
+	{ 200,  1495 }, /* 20.0dB */
+	{ 210,  1349 }, /* 21.0dB */
+	{ 220,  1222 }, /* 22.0dB */
+	{ 230,  1110 }, /* 23.0dB */
+	{ 240,  1011 }, /* 24.0dB */
+	{ 250,   925 }, /* 25.0dB */
+	{ 260,   853 }, /* 26.0dB */
+	{ 270,   789 }, /* 27.0dB */
+	{ 280,   734 }, /* 28.0dB */
+	{ 290,   690 }, /* 29.0dB */
+	{ 300,   650 }, /* 30.0dB */
+	{ 310,   619 }, /* 31.0dB */
+	{ 320,   593 }, /* 32.0dB */
+	{ 330,   571 }, /* 33.0dB */
+	{ 400,   498 }, /* 40.0dB */
+	{ 450,	 484 }, /* 45.0dB */
+	{ 500,	 481 }	/* 50.0dB */
+};
+
+/* RF level C/N lookup table */
+static const struct stv090x_tab stv090x_rf_tab[] = {
+	{  -5, 0xcaa1 }, /*  -5dBm */
+	{ -10, 0xc229 }, /* -10dBm */
+	{ -15, 0xbb08 }, /* -15dBm */
+	{ -20, 0xb4bc }, /* -20dBm */
+	{ -25, 0xad5a }, /* -25dBm */
+	{ -30, 0xa298 }, /* -30dBm */
+	{ -35, 0x98a8 }, /* -35dBm */
+	{ -40, 0x8389 }, /* -40dBm */
+	{ -45, 0x59be }, /* -45dBm */
+	{ -50, 0x3a14 }, /* -50dBm */
+	{ -55, 0x2d11 }, /* -55dBm */
+	{ -60, 0x210d }, /* -60dBm */
+	{ -65, 0xa14f }, /* -65dBm */
+	{ -70, 0x07aa }	 /* -70dBm */
+};
+
+
+static struct stv090x_reg stv0900_initval[] = {
+
+	{ STV090x_OUTCFG,		0x00 },
+	{ STV090x_MODECFG,		0xff },
+	{ STV090x_AGCRF1CFG,		0x11 },
+	{ STV090x_AGCRF2CFG,		0x13 },
+	{ STV090x_TSGENERAL1X,		0x14 },
+	{ STV090x_TSTTNR2,		0x21 },
+	{ STV090x_TSTTNR4,		0x21 },
+	{ STV090x_P2_DISTXCTL,		0x22 },
+	{ STV090x_P2_F22TX,		0xc0 },
+	{ STV090x_P2_F22RX,		0xc0 },
+	{ STV090x_P2_DISRXCTL,		0x00 },
+	{ STV090x_P2_DMDCFGMD,		0xF9 },
+	{ STV090x_P2_DEMOD,		0x08 },
+	{ STV090x_P2_DMDCFG3,		0xc4 },
+	{ STV090x_P2_CARFREQ,		0xed },
+	{ STV090x_P2_LDT,		0xd0 },
+	{ STV090x_P2_LDT2,		0xb8 },
+	{ STV090x_P2_TMGCFG,		0xd2 },
+	{ STV090x_P2_TMGTHRISE,		0x20 },
+	{ STV090x_P1_TMGCFG,		0xd2 },
+
+	{ STV090x_P2_TMGTHFALL,		0x00 },
+	{ STV090x_P2_FECSPY,		0x88 },
+	{ STV090x_P2_FSPYDATA,		0x3a },
+	{ STV090x_P2_FBERCPT4,		0x00 },
+	{ STV090x_P2_FSPYBER,		0x10 },
+	{ STV090x_P2_ERRCTRL1,		0x35 },
+	{ STV090x_P2_ERRCTRL2,		0xc1 },
+	{ STV090x_P2_CFRICFG,		0xf8 },
+	{ STV090x_P2_NOSCFG,		0x1c },
+	{ STV090x_P2_DMDTOM,		0x20 },
+	{ STV090x_P2_CORRELMANT,	0x70 },
+	{ STV090x_P2_CORRELABS,		0x88 },
+	{ STV090x_P2_AGC2O,		0x5b },
+	{ STV090x_P2_AGC2REF,		0x38 },
+	{ STV090x_P2_CARCFG,		0xe4 },
+	{ STV090x_P2_ACLC,		0x1A },
+	{ STV090x_P2_BCLC,		0x09 },
+	{ STV090x_P2_CARHDR,		0x08 },
+	{ STV090x_P2_KREFTMG,		0xc1 },
+	{ STV090x_P2_SFRUPRATIO,	0xf0 },
+	{ STV090x_P2_SFRLOWRATIO,	0x70 },
+	{ STV090x_P2_SFRSTEP,		0x58 },
+	{ STV090x_P2_TMGCFG2,		0x01 },
+	{ STV090x_P2_CAR2CFG,		0x26 },
+	{ STV090x_P2_BCLC2S2Q,		0x86 },
+	{ STV090x_P2_BCLC2S28,		0x86 },
+	{ STV090x_P2_SMAPCOEF7,		0x77 },
+	{ STV090x_P2_SMAPCOEF6,		0x85 },
+	{ STV090x_P2_SMAPCOEF5,		0x77 },
+	{ STV090x_P2_TSCFGL,		0x20 },
+	{ STV090x_P2_DMDCFG2,		0x3b },
+	{ STV090x_P2_MODCODLST0,	0xff },
+	{ STV090x_P2_MODCODLST1,	0xff },
+	{ STV090x_P2_MODCODLST2,	0xff },
+	{ STV090x_P2_MODCODLST3,	0xff },
+	{ STV090x_P2_MODCODLST4,	0xff },
+	{ STV090x_P2_MODCODLST5,	0xff },
+	{ STV090x_P2_MODCODLST6,	0xff },
+	{ STV090x_P2_MODCODLST7,	0xcc },
+	{ STV090x_P2_MODCODLST8,	0xcc },
+	{ STV090x_P2_MODCODLST9,	0xcc },
+	{ STV090x_P2_MODCODLSTA,	0xcc },
+	{ STV090x_P2_MODCODLSTB,	0xcc },
+	{ STV090x_P2_MODCODLSTC,	0xcc },
+	{ STV090x_P2_MODCODLSTD,	0xcc },
+	{ STV090x_P2_MODCODLSTE,	0xcc },
+	{ STV090x_P2_MODCODLSTF,	0xcf },
+	{ STV090x_P1_DISTXCTL,		0x22 },
+	{ STV090x_P1_F22TX,		0xc0 },
+	{ STV090x_P1_F22RX,		0xc0 },
+	{ STV090x_P1_DISRXCTL,		0x00 },
+	{ STV090x_P1_DMDCFGMD,		0xf9 },
+	{ STV090x_P1_DEMOD,		0x08 },
+	{ STV090x_P1_DMDCFG3,		0xc4 },
+	{ STV090x_P1_DMDTOM,		0x20 },
+	{ STV090x_P1_CARFREQ,		0xed },
+	{ STV090x_P1_LDT,		0xd0 },
+	{ STV090x_P1_LDT2,		0xb8 },
+	{ STV090x_P1_TMGCFG,		0xd2 },
+	{ STV090x_P1_TMGTHRISE,		0x20 },
+	{ STV090x_P1_TMGTHFALL,		0x00 },
+	{ STV090x_P1_SFRUPRATIO,	0xf0 },
+	{ STV090x_P1_SFRLOWRATIO,	0x70 },
+	{ STV090x_P1_TSCFGL,		0x20 },
+	{ STV090x_P1_FECSPY,		0x88 },
+	{ STV090x_P1_FSPYDATA,		0x3a },
+	{ STV090x_P1_FBERCPT4,		0x00 },
+	{ STV090x_P1_FSPYBER,		0x10 },
+	{ STV090x_P1_ERRCTRL1,		0x35 },
+	{ STV090x_P1_ERRCTRL2,		0xc1 },
+	{ STV090x_P1_CFRICFG,		0xf8 },
+	{ STV090x_P1_NOSCFG,		0x1c },
+	{ STV090x_P1_CORRELMANT,	0x70 },
+	{ STV090x_P1_CORRELABS,		0x88 },
+	{ STV090x_P1_AGC2O,		0x5b },
+	{ STV090x_P1_AGC2REF,		0x38 },
+	{ STV090x_P1_CARCFG,		0xe4 },
+	{ STV090x_P1_ACLC,		0x1A },
+	{ STV090x_P1_BCLC,		0x09 },
+	{ STV090x_P1_CARHDR,		0x08 },
+	{ STV090x_P1_KREFTMG,		0xc1 },
+	{ STV090x_P1_SFRSTEP,		0x58 },
+	{ STV090x_P1_TMGCFG2,		0x01 },
+	{ STV090x_P1_CAR2CFG,		0x26 },
+	{ STV090x_P1_BCLC2S2Q,		0x86 },
+	{ STV090x_P1_BCLC2S28,		0x86 },
+	{ STV090x_P1_SMAPCOEF7,		0x77 },
+	{ STV090x_P1_SMAPCOEF6,		0x85 },
+	{ STV090x_P1_SMAPCOEF5,		0x77 },
+	{ STV090x_P1_DMDCFG2,		0x3b },
+	{ STV090x_P1_MODCODLST0,	0xff },
+	{ STV090x_P1_MODCODLST1,	0xff },
+	{ STV090x_P1_MODCODLST2,	0xff },
+	{ STV090x_P1_MODCODLST3,	0xff },
+	{ STV090x_P1_MODCODLST4,	0xff },
+	{ STV090x_P1_MODCODLST5,	0xff },
+	{ STV090x_P1_MODCODLST6,	0xff },
+	{ STV090x_P1_MODCODLST7,	0xcc },
+	{ STV090x_P1_MODCODLST8,	0xcc },
+	{ STV090x_P1_MODCODLST9,	0xcc },
+	{ STV090x_P1_MODCODLSTA,	0xcc },
+	{ STV090x_P1_MODCODLSTB,	0xcc },
+	{ STV090x_P1_MODCODLSTC,	0xcc },
+	{ STV090x_P1_MODCODLSTD,	0xcc },
+	{ STV090x_P1_MODCODLSTE,	0xcc },
+	{ STV090x_P1_MODCODLSTF,	0xcf },
+	{ STV090x_GENCFG,		0x1d },
+	{ STV090x_NBITER_NF4,		0x37 },
+	{ STV090x_NBITER_NF5,		0x29 },
+	{ STV090x_NBITER_NF6,		0x37 },
+	{ STV090x_NBITER_NF7,		0x33 },
+	{ STV090x_NBITER_NF8,		0x31 },
+	{ STV090x_NBITER_NF9,		0x2f },
+	{ STV090x_NBITER_NF10,		0x39 },
+	{ STV090x_NBITER_NF11,		0x3a },
+	{ STV090x_NBITER_NF12,		0x29 },
+	{ STV090x_NBITER_NF13,		0x37 },
+	{ STV090x_NBITER_NF14,		0x33 },
+	{ STV090x_NBITER_NF15,		0x2f },
+	{ STV090x_NBITER_NF16,		0x39 },
+	{ STV090x_NBITER_NF17,		0x3a },
+	{ STV090x_NBITERNOERR,		0x04 },
+	{ STV090x_GAINLLR_NF4,		0x0C },
+	{ STV090x_GAINLLR_NF5,		0x0F },
+	{ STV090x_GAINLLR_NF6,		0x11 },
+	{ STV090x_GAINLLR_NF7,		0x14 },
+	{ STV090x_GAINLLR_NF8,		0x17 },
+	{ STV090x_GAINLLR_NF9,		0x19 },
+	{ STV090x_GAINLLR_NF10,		0x20 },
+	{ STV090x_GAINLLR_NF11,		0x21 },
+	{ STV090x_GAINLLR_NF12,		0x0D },
+	{ STV090x_GAINLLR_NF13,		0x0F },
+	{ STV090x_GAINLLR_NF14,		0x13 },
+	{ STV090x_GAINLLR_NF15,		0x1A },
+	{ STV090x_GAINLLR_NF16,		0x1F },
+	{ STV090x_GAINLLR_NF17,		0x21 },
+	{ STV090x_RCCFGH,		0x20 },
+	{ STV090x_P1_FECM,		0x01 }, /* disable DSS modes */
+	{ STV090x_P2_FECM,		0x01 }, /* disable DSS modes */
+	{ STV090x_P1_PRVIT,		0x2F }, /* disable PR 6/7 */
+	{ STV090x_P2_PRVIT,		0x2F }, /* disable PR 6/7 */
+};
+
+static struct stv090x_reg stv0903_initval[] = {
+	{ STV090x_OUTCFG,		0x00 },
+	{ STV090x_AGCRF1CFG,		0x11 },
+	{ STV090x_STOPCLK1,		0x48 },
+	{ STV090x_STOPCLK2,		0x14 },
+	{ STV090x_TSTTNR1,		0x27 },
+	{ STV090x_TSTTNR2,		0x21 },
+	{ STV090x_P1_DISTXCTL,		0x22 },
+	{ STV090x_P1_F22TX,		0xc0 },
+	{ STV090x_P1_F22RX,		0xc0 },
+	{ STV090x_P1_DISRXCTL,		0x00 },
+	{ STV090x_P1_DMDCFGMD,		0xF9 },
+	{ STV090x_P1_DEMOD,		0x08 },
+	{ STV090x_P1_DMDCFG3,		0xc4 },
+	{ STV090x_P1_CARFREQ,		0xed },
+	{ STV090x_P1_TNRCFG2,		0x82 },
+	{ STV090x_P1_LDT,		0xd0 },
+	{ STV090x_P1_LDT2,		0xb8 },
+	{ STV090x_P1_TMGCFG,		0xd2 },
+	{ STV090x_P1_TMGTHRISE,		0x20 },
+	{ STV090x_P1_TMGTHFALL,		0x00 },
+	{ STV090x_P1_SFRUPRATIO,	0xf0 },
+	{ STV090x_P1_SFRLOWRATIO,	0x70 },
+	{ STV090x_P1_TSCFGL,		0x20 },
+	{ STV090x_P1_FECSPY,		0x88 },
+	{ STV090x_P1_FSPYDATA,		0x3a },
+	{ STV090x_P1_FBERCPT4,		0x00 },
+	{ STV090x_P1_FSPYBER,		0x10 },
+	{ STV090x_P1_ERRCTRL1,		0x35 },
+	{ STV090x_P1_ERRCTRL2,		0xc1 },
+	{ STV090x_P1_CFRICFG,		0xf8 },
+	{ STV090x_P1_NOSCFG,		0x1c },
+	{ STV090x_P1_DMDTOM,		0x20 },
+	{ STV090x_P1_CORRELMANT,	0x70 },
+	{ STV090x_P1_CORRELABS,		0x88 },
+	{ STV090x_P1_AGC2O,		0x5b },
+	{ STV090x_P1_AGC2REF,		0x38 },
+	{ STV090x_P1_CARCFG,		0xe4 },
+	{ STV090x_P1_ACLC,		0x1A },
+	{ STV090x_P1_BCLC,		0x09 },
+	{ STV090x_P1_CARHDR,		0x08 },
+	{ STV090x_P1_KREFTMG,		0xc1 },
+	{ STV090x_P1_SFRSTEP,		0x58 },
+	{ STV090x_P1_TMGCFG2,		0x01 },
+	{ STV090x_P1_CAR2CFG,		0x26 },
+	{ STV090x_P1_BCLC2S2Q,		0x86 },
+	{ STV090x_P1_BCLC2S28,		0x86 },
+	{ STV090x_P1_SMAPCOEF7,		0x77 },
+	{ STV090x_P1_SMAPCOEF6,		0x85 },
+	{ STV090x_P1_SMAPCOEF5,		0x77 },
+	{ STV090x_P1_DMDCFG2,		0x3b },
+	{ STV090x_P1_MODCODLST0,	0xff },
+	{ STV090x_P1_MODCODLST1,	0xff },
+	{ STV090x_P1_MODCODLST2,	0xff },
+	{ STV090x_P1_MODCODLST3,	0xff },
+	{ STV090x_P1_MODCODLST4,	0xff },
+	{ STV090x_P1_MODCODLST5,	0xff },
+	{ STV090x_P1_MODCODLST6,	0xff },
+	{ STV090x_P1_MODCODLST7,	0xcc },
+	{ STV090x_P1_MODCODLST8,	0xcc },
+	{ STV090x_P1_MODCODLST9,	0xcc },
+	{ STV090x_P1_MODCODLSTA,	0xcc },
+	{ STV090x_P1_MODCODLSTB,	0xcc },
+	{ STV090x_P1_MODCODLSTC,	0xcc },
+	{ STV090x_P1_MODCODLSTD,	0xcc },
+	{ STV090x_P1_MODCODLSTE,	0xcc },
+	{ STV090x_P1_MODCODLSTF,	0xcf },
+	{ STV090x_GENCFG,		0x1c },
+	{ STV090x_NBITER_NF4,		0x37 },
+	{ STV090x_NBITER_NF5,		0x29 },
+	{ STV090x_NBITER_NF6,		0x37 },
+	{ STV090x_NBITER_NF7,		0x33 },
+	{ STV090x_NBITER_NF8,		0x31 },
+	{ STV090x_NBITER_NF9,		0x2f },
+	{ STV090x_NBITER_NF10,		0x39 },
+	{ STV090x_NBITER_NF11,		0x3a },
+	{ STV090x_NBITER_NF12,		0x29 },
+	{ STV090x_NBITER_NF13,		0x37 },
+	{ STV090x_NBITER_NF14,		0x33 },
+	{ STV090x_NBITER_NF15,		0x2f },
+	{ STV090x_NBITER_NF16,		0x39 },
+	{ STV090x_NBITER_NF17,		0x3a },
+	{ STV090x_NBITERNOERR,		0x04 },
+	{ STV090x_GAINLLR_NF4,		0x0C },
+	{ STV090x_GAINLLR_NF5,		0x0F },
+	{ STV090x_GAINLLR_NF6,		0x11 },
+	{ STV090x_GAINLLR_NF7,		0x14 },
+	{ STV090x_GAINLLR_NF8,		0x17 },
+	{ STV090x_GAINLLR_NF9,		0x19 },
+	{ STV090x_GAINLLR_NF10,		0x20 },
+	{ STV090x_GAINLLR_NF11,		0x21 },
+	{ STV090x_GAINLLR_NF12,		0x0D },
+	{ STV090x_GAINLLR_NF13,		0x0F },
+	{ STV090x_GAINLLR_NF14,		0x13 },
+	{ STV090x_GAINLLR_NF15,		0x1A },
+	{ STV090x_GAINLLR_NF16,		0x1F },
+	{ STV090x_GAINLLR_NF17,		0x21 },
+	{ STV090x_RCCFGH,		0x20 },
+	{ STV090x_P1_FECM,		0x01 }, /*disable the DSS mode */
+	{ STV090x_P1_PRVIT,		0x2f }  /*disable puncture rate 6/7*/
+};
+
+static struct stv090x_reg stv0900_cut20_val[] = {
+
+	{ STV090x_P2_DMDCFG3,		0xe8 },
+	{ STV090x_P2_DMDCFG4,		0x10 },
+	{ STV090x_P2_CARFREQ,		0x38 },
+	{ STV090x_P2_CARHDR,		0x20 },
+	{ STV090x_P2_KREFTMG,		0x5a },
+	{ STV090x_P2_SMAPCOEF7,		0x06 },
+	{ STV090x_P2_SMAPCOEF6,		0x00 },
+	{ STV090x_P2_SMAPCOEF5,		0x04 },
+	{ STV090x_P2_NOSCFG,		0x0c },
+	{ STV090x_P1_DMDCFG3,		0xe8 },
+	{ STV090x_P1_DMDCFG4,		0x10 },
+	{ STV090x_P1_CARFREQ,		0x38 },
+	{ STV090x_P1_CARHDR,		0x20 },
+	{ STV090x_P1_KREFTMG,		0x5a },
+	{ STV090x_P1_SMAPCOEF7,		0x06 },
+	{ STV090x_P1_SMAPCOEF6,		0x00 },
+	{ STV090x_P1_SMAPCOEF5,		0x04 },
+	{ STV090x_P1_NOSCFG,		0x0c },
+	{ STV090x_GAINLLR_NF4,		0x21 },
+	{ STV090x_GAINLLR_NF5,		0x21 },
+	{ STV090x_GAINLLR_NF6,		0x20 },
+	{ STV090x_GAINLLR_NF7,		0x1F },
+	{ STV090x_GAINLLR_NF8,		0x1E },
+	{ STV090x_GAINLLR_NF9,		0x1E },
+	{ STV090x_GAINLLR_NF10,		0x1D },
+	{ STV090x_GAINLLR_NF11,		0x1B },
+	{ STV090x_GAINLLR_NF12,		0x20 },
+	{ STV090x_GAINLLR_NF13,		0x20 },
+	{ STV090x_GAINLLR_NF14,		0x20 },
+	{ STV090x_GAINLLR_NF15,		0x20 },
+	{ STV090x_GAINLLR_NF16,		0x20 },
+	{ STV090x_GAINLLR_NF17,		0x21 },
+};
+
+static struct stv090x_reg stv0903_cut20_val[] = {
+	{ STV090x_P1_DMDCFG3,		0xe8 },
+	{ STV090x_P1_DMDCFG4,		0x10 },
+	{ STV090x_P1_CARFREQ,		0x38 },
+	{ STV090x_P1_CARHDR,		0x20 },
+	{ STV090x_P1_KREFTMG,		0x5a },
+	{ STV090x_P1_SMAPCOEF7,		0x06 },
+	{ STV090x_P1_SMAPCOEF6,		0x00 },
+	{ STV090x_P1_SMAPCOEF5,		0x04 },
+	{ STV090x_P1_NOSCFG,		0x0c },
+	{ STV090x_GAINLLR_NF4,		0x21 },
+	{ STV090x_GAINLLR_NF5,		0x21 },
+	{ STV090x_GAINLLR_NF6,		0x20 },
+	{ STV090x_GAINLLR_NF7,		0x1F },
+	{ STV090x_GAINLLR_NF8,		0x1E },
+	{ STV090x_GAINLLR_NF9,		0x1E },
+	{ STV090x_GAINLLR_NF10,		0x1D },
+	{ STV090x_GAINLLR_NF11,		0x1B },
+	{ STV090x_GAINLLR_NF12,		0x20 },
+	{ STV090x_GAINLLR_NF13,		0x20 },
+	{ STV090x_GAINLLR_NF14,		0x20 },
+	{ STV090x_GAINLLR_NF15,		0x20 },
+	{ STV090x_GAINLLR_NF16,		0x20 },
+	{ STV090x_GAINLLR_NF17,		0x21 }
+};
+
+/* Cut 2.0 Long Frame Tracking CR loop */
+static struct stv090x_long_frame_crloop stv090x_s2_crl_cut20[] = {
+	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+	{ STV090x_QPSK_12,  0x1f, 0x3f, 0x1e, 0x3f, 0x3d, 0x1f, 0x3d, 0x3e, 0x3d, 0x1e },
+	{ STV090x_QPSK_35,  0x2f, 0x3f, 0x2e, 0x2f, 0x3d, 0x0f, 0x0e, 0x2e, 0x3d, 0x0e },
+	{ STV090x_QPSK_23,  0x2f, 0x3f, 0x2e, 0x2f, 0x0e, 0x0f, 0x0e, 0x1e, 0x3d, 0x3d },
+	{ STV090x_QPSK_34,  0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
+	{ STV090x_QPSK_45,  0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
+	{ STV090x_QPSK_56,  0x3f, 0x3f, 0x3e, 0x1f, 0x0e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
+	{ STV090x_QPSK_89,  0x3f, 0x3f, 0x3e, 0x1f, 0x1e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
+	{ STV090x_QPSK_910, 0x3f, 0x3f, 0x3e, 0x1f, 0x1e, 0x3e, 0x0e, 0x1e, 0x3d, 0x3d },
+	{ STV090x_8PSK_35,  0x3c, 0x3e, 0x1c, 0x2e, 0x0c, 0x1e, 0x2b, 0x2d, 0x1b, 0x1d },
+	{ STV090x_8PSK_23,  0x1d, 0x3e, 0x3c, 0x2e, 0x2c, 0x1e, 0x0c, 0x2d, 0x2b, 0x1d },
+	{ STV090x_8PSK_34,  0x0e, 0x3e, 0x3d, 0x2e, 0x0d, 0x1e, 0x2c, 0x2d, 0x0c, 0x1d },
+	{ STV090x_8PSK_56,  0x2e, 0x3e, 0x1e, 0x2e, 0x2d, 0x1e, 0x3c, 0x2d, 0x2c, 0x1d },
+	{ STV090x_8PSK_89,  0x3e, 0x3e, 0x1e, 0x2e, 0x3d, 0x1e, 0x0d, 0x2d, 0x3c, 0x1d },
+	{ STV090x_8PSK_910, 0x3e, 0x3e, 0x1e, 0x2e, 0x3d, 0x1e, 0x1d, 0x2d, 0x0d, 0x1d }
+};
+
+/* Cut 3.0 Long Frame Tracking CR loop */
+static	struct stv090x_long_frame_crloop stv090x_s2_crl_cut30[] = {
+	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+	{ STV090x_QPSK_12,  0x3c, 0x2c, 0x0c, 0x2c, 0x1b, 0x2c, 0x1b, 0x1c, 0x0b, 0x3b },
+	{ STV090x_QPSK_35,  0x0d, 0x0d, 0x0c, 0x0d, 0x1b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b },
+	{ STV090x_QPSK_23,  0x1d, 0x0d, 0x0c, 0x1d, 0x2b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b },
+	{ STV090x_QPSK_34,  0x1d, 0x1d, 0x0c, 0x1d, 0x2b, 0x3c, 0x1b, 0x1c, 0x0b, 0x3b },
+	{ STV090x_QPSK_45,  0x2d, 0x1d, 0x1c, 0x1d, 0x2b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b },
+	{ STV090x_QPSK_56,  0x2d, 0x1d, 0x1c, 0x1d, 0x2b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b },
+	{ STV090x_QPSK_89,  0x3d, 0x2d, 0x1c, 0x1d, 0x3b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b },
+	{ STV090x_QPSK_910, 0x3d, 0x2d, 0x1c, 0x1d, 0x3b, 0x3c, 0x2b, 0x0c, 0x1b, 0x3b },
+	{ STV090x_8PSK_35,  0x39, 0x29, 0x39, 0x19, 0x19, 0x19, 0x19, 0x19, 0x09, 0x19 },
+	{ STV090x_8PSK_23,  0x2a, 0x39, 0x1a, 0x0a, 0x39, 0x0a, 0x29, 0x39, 0x29, 0x0a },
+	{ STV090x_8PSK_34,  0x2b, 0x3a, 0x1b, 0x1b, 0x3a, 0x1b, 0x1a, 0x0b, 0x1a, 0x3a },
+	{ STV090x_8PSK_56,  0x0c, 0x1b, 0x3b, 0x3b, 0x1b, 0x3b, 0x3a, 0x3b, 0x3a, 0x1b },
+	{ STV090x_8PSK_89,  0x0d, 0x3c, 0x2c, 0x2c, 0x2b, 0x0c, 0x0b, 0x3b, 0x0b, 0x1b },
+	{ STV090x_8PSK_910, 0x0d, 0x0d, 0x2c, 0x3c, 0x3b, 0x1c, 0x0b, 0x3b, 0x0b, 0x1b }
+};
+
+/* Cut 2.0 Long Frame Tracking CR Loop */
+static struct stv090x_long_frame_crloop stv090x_s2_apsk_crl_cut20[] = {
+	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+	{ STV090x_16APSK_23,  0x0c, 0x0c, 0x0c, 0x0c, 0x1d, 0x0c, 0x3c, 0x0c, 0x2c, 0x0c },
+	{ STV090x_16APSK_34,  0x0c, 0x0c, 0x0c, 0x0c, 0x0e, 0x0c, 0x2d, 0x0c, 0x1d, 0x0c },
+	{ STV090x_16APSK_45,  0x0c, 0x0c, 0x0c, 0x0c, 0x1e, 0x0c, 0x3d, 0x0c, 0x2d, 0x0c },
+	{ STV090x_16APSK_56,  0x0c, 0x0c, 0x0c, 0x0c, 0x1e, 0x0c, 0x3d, 0x0c, 0x2d, 0x0c },
+	{ STV090x_16APSK_89,  0x0c, 0x0c, 0x0c, 0x0c, 0x2e, 0x0c, 0x0e, 0x0c, 0x3d, 0x0c },
+	{ STV090x_16APSK_910, 0x0c, 0x0c, 0x0c, 0x0c, 0x2e, 0x0c, 0x0e, 0x0c, 0x3d, 0x0c },
+	{ STV090x_32APSK_34,  0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c },
+	{ STV090x_32APSK_45,  0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c },
+	{ STV090x_32APSK_56,  0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c },
+	{ STV090x_32APSK_89,  0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c },
+	{ STV090x_32APSK_910, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c }
+};
+
+/* Cut 3.0 Long Frame Tracking CR Loop */
+static struct stv090x_long_frame_crloop	stv090x_s2_apsk_crl_cut30[] = {
+	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+	{ STV090x_16APSK_23,  0x0a, 0x0a, 0x0a, 0x0a, 0x1a, 0x0a, 0x3a, 0x0a, 0x2a, 0x0a },
+	{ STV090x_16APSK_34,  0x0a, 0x0a, 0x0a, 0x0a, 0x0b, 0x0a, 0x3b, 0x0a, 0x1b, 0x0a },
+	{ STV090x_16APSK_45,  0x0a, 0x0a, 0x0a, 0x0a, 0x1b, 0x0a, 0x3b, 0x0a, 0x2b, 0x0a },
+	{ STV090x_16APSK_56,  0x0a, 0x0a, 0x0a, 0x0a, 0x1b, 0x0a, 0x3b, 0x0a, 0x2b, 0x0a },
+	{ STV090x_16APSK_89,  0x0a, 0x0a, 0x0a, 0x0a, 0x2b, 0x0a, 0x0c, 0x0a, 0x3b, 0x0a },
+	{ STV090x_16APSK_910, 0x0a, 0x0a, 0x0a, 0x0a, 0x2b, 0x0a, 0x0c, 0x0a, 0x3b, 0x0a },
+	{ STV090x_32APSK_34,  0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a },
+	{ STV090x_32APSK_45,  0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a },
+	{ STV090x_32APSK_56,  0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a },
+	{ STV090x_32APSK_89,  0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a },
+	{ STV090x_32APSK_910, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a }
+};
+
+static struct stv090x_long_frame_crloop stv090x_s2_lowqpsk_crl_cut20[] = {
+	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+	{ STV090x_QPSK_14,  0x0f, 0x3f, 0x0e, 0x3f, 0x2d, 0x2f, 0x2d, 0x1f, 0x3d, 0x3e },
+	{ STV090x_QPSK_13,  0x0f, 0x3f, 0x0e, 0x3f, 0x2d, 0x2f, 0x3d, 0x0f, 0x3d, 0x2e },
+	{ STV090x_QPSK_25,  0x1f, 0x3f, 0x1e, 0x3f, 0x3d, 0x1f, 0x3d, 0x3e, 0x3d, 0x2e }
+};
+
+static struct stv090x_long_frame_crloop	stv090x_s2_lowqpsk_crl_cut30[] = {
+	/* MODCOD  2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+	{ STV090x_QPSK_14,  0x0c, 0x3c, 0x0b, 0x3c, 0x2a, 0x2c, 0x2a, 0x1c, 0x3a, 0x3b },
+	{ STV090x_QPSK_13,  0x0c, 0x3c, 0x0b, 0x3c, 0x2a, 0x2c, 0x3a, 0x0c, 0x3a, 0x2b },
+	{ STV090x_QPSK_25,  0x1c, 0x3c, 0x1b, 0x3c, 0x3a, 0x1c, 0x3a, 0x3b, 0x3a, 0x2b }
+};
+
+/* Cut 2.0 Short Frame Tracking CR Loop */
+static struct stv090x_short_frame_crloop stv090x_s2_short_crl_cut20[] = {
+	/* MODCOD	  2M    5M    10M   20M   30M */
+	{ STV090x_QPSK,   0x2f, 0x2e, 0x0e, 0x0e, 0x3d },
+	{ STV090x_8PSK,   0x3e, 0x0e, 0x2d, 0x0d, 0x3c },
+	{ STV090x_16APSK, 0x1e, 0x1e, 0x1e, 0x3d, 0x2d },
+	{ STV090x_32APSK, 0x1e, 0x1e, 0x1e, 0x3d, 0x2d }
+};
+
+/* Cut 3.0 Short Frame Tracking CR Loop */
+static struct stv090x_short_frame_crloop stv090x_s2_short_crl_cut30[] = {
+	/* MODCOD  	  2M	5M    10M   20M	  30M */
+	{ STV090x_QPSK,   0x2C, 0x2B, 0x0B, 0x0B, 0x3A },
+	{ STV090x_8PSK,   0x3B, 0x0B, 0x2A, 0x0A, 0x39 },
+	{ STV090x_16APSK, 0x1B, 0x1B, 0x1B, 0x3A, 0x2A },
+	{ STV090x_32APSK, 0x1B, 0x1B, 0x1B, 0x3A, 0x2A }
+};
+
+static inline s32 comp2(s32 __x, s32 __width)
+{
+	if (__width == 32)
+		return __x;
+	else
+		return (__x >= (1 << (__width - 1))) ? (__x - (1 << __width)) : __x;
+}
+
+static int stv090x_read_reg(struct stv090x_state *state, unsigned int reg)
+{
+	const struct stv090x_config *config = state->config;
+	int ret;
+
+	u8 b0[] = { reg >> 8, reg & 0xff };
+	u8 buf;
+
+	struct i2c_msg msg[] = {
+		{ .addr	= config->address, .flags	= 0, 		.buf = b0,   .len = 2 },
+		{ .addr	= config->address, .flags	= I2C_M_RD,	.buf = &buf, .len = 1 }
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+	if (ret != 2) {
+		if (ret != -ERESTARTSYS)
+			dprintk(FE_ERROR, 1,
+				"Read error, Reg=[0x%02x], Status=%d",
+				reg, ret);
+
+		return ret < 0 ? ret : -EREMOTEIO;
+	}
+	if (unlikely(*state->verbose >= FE_DEBUGREG))
+		dprintk(FE_ERROR, 1, "Reg=[0x%02x], data=%02x",
+			reg, buf);
+
+	return (unsigned int) buf;
+}
+
+static int stv090x_write_regs(struct stv090x_state *state, unsigned int reg, u8 *data, u32 count)
+{
+	const struct stv090x_config *config = state->config;
+	int ret;
+	u8 buf[2 + count];
+	struct i2c_msg i2c_msg = { .addr = config->address, .flags = 0, .buf = buf, .len = 2 + count };
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+	memcpy(&buf[2], data, count);
+
+	if (unlikely(*state->verbose >= FE_DEBUGREG)) {
+		int i;
+
+		printk(KERN_DEBUG "%s [0x%04x]:", __func__, reg);
+		for (i = 0; i < count; i++)
+			printk(" %02x", data[i]);
+		printk("\n");
+	}
+
+	ret = i2c_transfer(state->i2c, &i2c_msg, 1);
+	if (ret != 1) {
+		if (ret != -ERESTARTSYS)
+			dprintk(FE_ERROR, 1, "Reg=[0x%04x], Data=[0x%02x ...], Count=%u, Status=%d",
+				reg, data[0], count, ret);
+		return ret < 0 ? ret : -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int stv090x_write_reg(struct stv090x_state *state, unsigned int reg, u8 data)
+{
+	return stv090x_write_regs(state, reg, &data, 1);
+}
+
+static int stv090x_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg;
+
+	reg = STV090x_READ_DEMOD(state, I2CRPT);
+	if (enable) {
+		dprintk(FE_DEBUG, 1, "Enable Gate");
+		STV090x_SETFIELD_Px(reg, I2CT_ON_FIELD, 1);
+		if (STV090x_WRITE_DEMOD(state, I2CRPT, reg) < 0)
+			goto err;
+
+	} else {
+		dprintk(FE_DEBUG, 1, "Disable Gate");
+		STV090x_SETFIELD_Px(reg, I2CT_ON_FIELD, 0);
+		if ((STV090x_WRITE_DEMOD(state, I2CRPT, reg)) < 0)
+			goto err;
+	}
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static void stv090x_get_lock_tmg(struct stv090x_state *state)
+{
+	switch (state->algo) {
+	case STV090x_BLIND_SEARCH:
+		dprintk(FE_DEBUG, 1, "Blind Search");
+		if (state->srate <= 1500000) {  /*10Msps< SR <=15Msps*/
+			state->DemodTimeout = 1500;
+			state->FecTimeout = 400;
+		} else if (state->srate <= 5000000) {  /*10Msps< SR <=15Msps*/
+			state->DemodTimeout = 1000;
+			state->FecTimeout = 300;
+		} else {  /*SR >20Msps*/
+			state->DemodTimeout = 700;
+			state->FecTimeout = 100;
+		}
+		break;
+
+	case STV090x_COLD_SEARCH:
+	case STV090x_WARM_SEARCH:
+	default:
+		dprintk(FE_DEBUG, 1, "Normal Search");
+		if (state->srate <= 1000000) {  /*SR <=1Msps*/
+			state->DemodTimeout = 4500;
+			state->FecTimeout = 1700;
+		} else if (state->srate <= 2000000) { /*1Msps < SR <= 2Msps */
+			state->DemodTimeout = 2500;
+			state->FecTimeout = 1100;
+		} else if (state->srate <= 5000000) { /*2Msps < SR <= 5Msps */
+			state->DemodTimeout = 1000;
+			state->FecTimeout = 550;
+		} else if (state->srate <= 10000000) { /*5Msps < SR <= 10Msps */
+			state->DemodTimeout = 700;
+			state->FecTimeout = 250;
+		} else if (state->srate <= 20000000) { /*10Msps < SR <= 20Msps */
+			state->DemodTimeout = 400;
+			state->FecTimeout = 130;
+		} else {   /*SR >20Msps*/
+			state->DemodTimeout = 300;
+			state->FecTimeout = 100;
+		}
+		break;
+	}
+
+	if (state->algo == STV090x_WARM_SEARCH)
+		state->DemodTimeout /= 2;
+}
+
+static int stv090x_set_srate(struct stv090x_state *state, u32 srate)
+{
+	u32 sym;
+
+	if (srate > 60000000) {
+		sym  = (srate << 4); /* SR * 2^16 / master_clk */
+		sym /= (state->mclk >> 12);
+	} else if (srate > 6000000) {
+		sym  = (srate << 6);
+		sym /= (state->mclk >> 10);
+	} else {
+		sym  = (srate << 9);
+		sym /= (state->mclk >> 7);
+	}
+
+	if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0x7f) < 0) /* MSB */
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, SFRINIT0, (sym & 0xff)) < 0) /* LSB */
+		goto err;
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_set_max_srate(struct stv090x_state *state, u32 clk, u32 srate)
+{
+	u32 sym;
+
+	srate = 105 * (srate / 100);
+	if (srate > 60000000) {
+		sym  = (srate << 4); /* SR * 2^16 / master_clk */
+		sym /= (state->mclk >> 12);
+	} else if (srate > 6000000) {
+		sym  = (srate << 6);
+		sym /= (state->mclk >> 10);
+	} else {
+		sym  = (srate << 9);
+		sym /= (state->mclk >> 7);
+	}
+
+	if (sym < 0x7fff) {
+		if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0) /* MSB */
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0) /* LSB */
+			goto err;
+	} else {
+		if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x7f) < 0) /* MSB */
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xff) < 0) /* LSB */
+			goto err;
+	}
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_set_min_srate(struct stv090x_state *state, u32 clk, u32 srate)
+{
+	u32 sym;
+
+	srate = 95 * (srate / 100);
+	if (srate > 60000000) {
+		sym  = (srate << 4); /* SR * 2^16 / master_clk */
+		sym /= (state->mclk >> 12);
+	} else if (srate > 6000000) {
+		sym  = (srate << 6);
+		sym /= (state->mclk >> 10);
+	} else {
+		sym  = (srate << 9);
+		sym /= (state->mclk >> 7);
+	}
+
+	if (STV090x_WRITE_DEMOD(state, SFRLOW1, ((sym >> 8) & 0xff)) < 0) /* MSB */
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, SFRLOW0, (sym & 0xff)) < 0) /* LSB */
+		goto err;
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static u32 stv090x_car_width(u32 srate, enum stv090x_rolloff rolloff)
+{
+	u32 ro;
+
+	switch (rolloff) {
+	case STV090x_RO_20:
+		ro = 20;
+		break;
+	case STV090x_RO_25:
+		ro = 25;
+		break;
+	case STV090x_RO_35:
+	default:
+		ro = 35;
+		break;
+	}
+
+	return srate + (srate * ro) / 100;
+}
+
+static int stv090x_set_vit_thacq(struct stv090x_state *state)
+{
+	if (STV090x_WRITE_DEMOD(state, VTH12, 0x96) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH23, 0x64) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH34, 0x36) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH56, 0x23) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH67, 0x1e) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH78, 0x19) < 0)
+		goto err;
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_set_vit_thtracq(struct stv090x_state *state)
+{
+	if (STV090x_WRITE_DEMOD(state, VTH12, 0xd0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH23, 0x7d) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH34, 0x53) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH56, 0x2f) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH67, 0x24) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, VTH78, 0x1f) < 0)
+		goto err;
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_set_viterbi(struct stv090x_state *state)
+{
+	switch (state->search_mode) {
+	case STV090x_SEARCH_AUTO:
+		if (STV090x_WRITE_DEMOD(state, FECM, 0x10) < 0) /* DVB-S and DVB-S2 */
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, PRVIT, 0x3f) < 0) /* all puncture rate */
+			goto err;
+		break;
+	case STV090x_SEARCH_DVBS1:
+		if (STV090x_WRITE_DEMOD(state, FECM, 0x00) < 0) /* disable DSS */
+			goto err;
+		switch (state->fec) {
+		case STV090x_PR12:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x01) < 0)
+				goto err;
+			break;
+
+		case STV090x_PR23:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x02) < 0)
+				goto err;
+			break;
+
+		case STV090x_PR34:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x04) < 0)
+				goto err;
+			break;
+
+		case STV090x_PR56:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x08) < 0)
+				goto err;
+			break;
+
+		case STV090x_PR78:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x20) < 0)
+				goto err;
+			break;
+
+		default:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x2f) < 0) /* all */
+				goto err;
+			break;
+		}
+		break;
+	case STV090x_SEARCH_DSS:
+		if (STV090x_WRITE_DEMOD(state, FECM, 0x80) < 0)
+			goto err;
+		switch (state->fec) {
+		case STV090x_PR12:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x01) < 0)
+				goto err;
+			break;
+
+		case STV090x_PR23:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x02) < 0)
+				goto err;
+			break;
+
+		case STV090x_PR67:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x10) < 0)
+				goto err;
+			break;
+
+		default:
+			if (STV090x_WRITE_DEMOD(state, PRVIT, 0x13) < 0) /* 1/2, 2/3, 6/7 */
+				goto err;
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_stop_modcod(struct stv090x_state *state)
+{
+	if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xff) < 0)
+		goto err;
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_activate_modcod(struct stv090x_state *state)
+{
+	if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xfc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xcc) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xcf) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_activate_modcod_single(struct stv090x_state *state)
+{
+
+	if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xf0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0x0f) < 0)
+		goto err;
+
+	return 0;
+
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_vitclk_ctl(struct stv090x_state *state, int enable)
+{
+	u32 reg;
+
+	switch (state->demod) {
+	case STV090x_DEMODULATOR_0:
+		mutex_lock(&demod_lock);
+		reg = stv090x_read_reg(state, STV090x_STOPCLK2);
+		STV090x_SETFIELD(reg, STOP_CLKVIT1_FIELD, enable);
+		if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
+			goto err;
+		mutex_unlock(&demod_lock);
+		break;
+
+	case STV090x_DEMODULATOR_1:
+		mutex_lock(&demod_lock);
+		reg = stv090x_read_reg(state, STV090x_STOPCLK2);
+		STV090x_SETFIELD(reg, STOP_CLKVIT2_FIELD, enable);
+		if (stv090x_write_reg(state, STV090x_STOPCLK2, reg) < 0)
+			goto err;
+		mutex_unlock(&demod_lock);
+		break;
+
+	default:
+		dprintk(FE_ERROR, 1, "Wrong demodulator!");
+		break;
+	}
+	return 0;
+err:
+	mutex_unlock(&demod_lock);
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_dvbs_track_crl(struct stv090x_state *state)
+{
+	if (state->dev_ver >= 0x30) {
+		/* Set ACLC BCLC optimised value vs SR */
+		if (state->srate >= 15000000) {
+			if (STV090x_WRITE_DEMOD(state, ACLC, 0x2b) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, BCLC, 0x1a) < 0)
+				goto err;
+		} else if ((state->srate >= 7000000) && (15000000 > state->srate)) {
+			if (STV090x_WRITE_DEMOD(state, ACLC, 0x0c) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, BCLC, 0x1b) < 0)
+				goto err;
+		} else if (state->srate < 7000000) {
+			if (STV090x_WRITE_DEMOD(state, ACLC, 0x2c) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, BCLC, 0x1c) < 0)
+				goto err;
+		}
+
+	} else {
+		/* Cut 2.0 */
+		if (STV090x_WRITE_DEMOD(state, ACLC, 0x1a) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, BCLC, 0x09) < 0)
+			goto err;
+	}
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_delivery_search(struct stv090x_state *state)
+{
+	u32 reg;
+
+	switch (state->search_mode) {
+	case STV090x_SEARCH_DVBS1:
+	case STV090x_SEARCH_DSS:
+		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
+		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+			goto err;
+
+		/* Activate Viterbi decoder in legacy search,
+		 * do not use FRESVIT1, might impact VITERBI2
+		 */
+		if (stv090x_vitclk_ctl(state, 0) < 0)
+			goto err;
+
+		if (stv090x_dvbs_track_crl(state) < 0)
+			goto err;
+
+		if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x22) < 0) /* disable DVB-S2 */
+			goto err;
+
+		if (stv090x_set_vit_thacq(state) < 0)
+			goto err;
+		if (stv090x_set_viterbi(state) < 0)
+			goto err;
+		break;
+
+	case STV090x_SEARCH_DVBS2:
+		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
+		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+			goto err;
+		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
+		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+			goto err;
+
+		if (stv090x_vitclk_ctl(state, 1) < 0)
+			goto err;
+
+		if (STV090x_WRITE_DEMOD(state, ACLC, 0x1a) < 0) /* stop DVB-S CR loop */
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, BCLC, 0x09) < 0)
+			goto err;
+
+		if (state->dev_ver <= 0x20) {
+			/* enable S2 carrier loop */
+			if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x26) < 0)
+				goto err;
+		} else {
+			/* > Cut 3: Stop carrier 3 */
+			if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x66) < 0)
+				goto err;
+		}
+
+		if (state->demod_mode != STV090x_SINGLE) {
+			/* Cut 2: enable link during search */
+			if (stv090x_activate_modcod(state) < 0)
+				goto err;
+		} else {
+			/* Single demodulator
+			 * Authorize SHORT and LONG frames,
+			 * QPSK, 8PSK, 16APSK and 32APSK
+			 */
+			if (stv090x_activate_modcod_single(state) < 0)
+				goto err;
+		}
+
+		break;
+
+	case STV090x_SEARCH_AUTO:
+	default:
+		/* enable DVB-S2 and DVB-S2 in Auto MODE */
+		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
+		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+			goto err;
+
+		if (stv090x_vitclk_ctl(state, 0) < 0)
+			goto err;
+
+		if (stv090x_dvbs_track_crl(state) < 0)
+			goto err;
+
+		if (state->dev_ver <= 0x20) {
+			/* enable S2 carrier loop */
+			if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x26) < 0)
+				goto err;
+		} else {
+			/* > Cut 3: Stop carrier 3 */
+			if (STV090x_WRITE_DEMOD(state, CAR2CFG, 0x66) < 0)
+				goto err;
+		}
+
+		if (state->demod_mode != STV090x_SINGLE) {
+			/* Cut 2: enable link during search */
+			if (stv090x_activate_modcod(state) < 0)
+				goto err;
+		} else {
+			/* Single demodulator
+			 * Authorize SHORT and LONG frames,
+			 * QPSK, 8PSK, 16APSK and 32APSK
+			 */
+			if (stv090x_activate_modcod_single(state) < 0)
+				goto err;
+		}
+
+		if (state->srate >= 2000000) {
+			/* Srate >= 2MSPS, Viterbi threshold to acquire */
+			if (stv090x_set_vit_thacq(state) < 0)
+				goto err;
+		} else {
+			/* Srate < 2MSPS, Reset Viterbi thresholdto track
+			 * and then re-acquire
+			 */
+			if (stv090x_set_vit_thtracq(state) < 0)
+				goto err;
+		}
+
+		if (stv090x_set_viterbi(state) < 0)
+			goto err;
+		break;
+	}
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_start_search(struct stv090x_state *state)
+{
+	u32 reg, freq_abs;
+	s16 freq;
+
+	/* Reset demodulator */
+	reg = STV090x_READ_DEMOD(state, DMDISTATE);
+	STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x1f);
+	if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0)
+		goto err;
+
+	if (state->dev_ver <= 0x20) {
+		if (state->srate <= 5000000) {
+			if (STV090x_WRITE_DEMOD(state, CARCFG, 0x44) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, CFRUP1, 0x0f) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, CFRUP1, 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, CFRLOW1, 0xf0) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, CFRLOW0, 0x00) < 0)
+				goto err;
+
+			/*enlarge the timing bandwith for Low SR*/
+			if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0)
+				goto err;
+		} else {
+			/* If the symbol rate is >5 Msps
+			Set The carrier search up and low to auto mode */
+			if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0)
+				goto err;
+			/*reduce the timing bandwith for high SR*/
+			if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0)
+				goto err;
+		}
+	} else {
+		/* >= Cut 3 */
+		if (state->srate <= 5000000) {
+			/* enlarge the timing bandwith for Low SR */
+			STV090x_WRITE_DEMOD(state, RTCS2, 0x68);
+		} else {
+			/* reduce timing bandwith for high SR */
+			STV090x_WRITE_DEMOD(state, RTCS2, 0x44);
+		}
+
+		/* Set CFR min and max to manual mode */
+		STV090x_WRITE_DEMOD(state, CARCFG, 0x46);
+
+		if (state->algo == STV090x_WARM_SEARCH) {
+			/* WARM Start
+			 * CFR min = -1MHz,
+			 * CFR max = +1MHz
+			 */
+			freq_abs  = 1000 << 16;
+			freq_abs /= (state->mclk / 1000);
+			freq      = (s16) freq_abs;
+		} else {
+			/* COLD Start
+			 * CFR min =- (SearchRange / 2 + 600KHz)
+			 * CFR max = +(SearchRange / 2 + 600KHz)
+			 * (600KHz for the tuner step size)
+			 */
+			freq_abs  = (state->search_range / 2000) + 600;
+			freq_abs  = freq_abs << 16;
+			freq_abs /= (state->mclk / 1000);
+			freq      = (s16) freq_abs;
+		}
+
+		if (STV090x_WRITE_DEMOD(state, CFRUP1, MSB(freq)) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRUP1, LSB(freq)) < 0)
+			goto err;
+
+		freq *= -1;
+
+		if (STV090x_WRITE_DEMOD(state, CFRLOW1, MSB(freq)) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRLOW0, LSB(freq)) < 0)
+			goto err;
+
+	}
+
+	if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0) < 0)
+		goto err;
+
+	if (state->dev_ver >= 0x20) {
+		if (STV090x_WRITE_DEMOD(state, EQUALCFG, 0x41) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0)
+			goto err;
+
+		if ((state->search_mode == STV090x_DVBS1)	||
+			(state->search_mode == STV090x_DSS)	||
+			(state->search_mode == STV090x_SEARCH_AUTO)) {
+
+			if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x82) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x00) < 0)
+				goto err;
+		}
+	}
+
+	if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0xe0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0xc0) < 0)
+		goto err;
+
+	reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+	STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0);
+	STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0);
+	if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+		goto err;
+	reg = STV090x_READ_DEMOD(state, DMDCFG2);
+	STV090x_SETFIELD_Px(reg, S1S2_SEQUENTIAL_FIELD, 0x0);
+	if (STV090x_WRITE_DEMOD(state, DMDCFG2, reg) < 0)
+		goto err;
+
+	if (state->dev_ver >= 0x20) {
+		/*Frequency offset detector setting*/
+		if (state->srate < 2000000) {
+			if (state->dev_ver <= 0x20) {
+				/* Cut 2 */
+				if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x39) < 0)
+					goto err;
+			} else {
+				/* Cut 2 */
+				if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x89) < 0)
+					goto err;
+			}
+			if (STV090x_WRITE_DEMOD(state, CARHDR, 0x40) < 0)
+				goto err;
+		}
+
+		if (state->srate < 10000000) {
+			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4c) < 0)
+				goto err;
+		} else {
+			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4b) < 0)
+				goto err;
+		}
+	} else {
+		if (state->srate < 10000000) {
+			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0xef) < 0)
+				goto err;
+		} else {
+			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0xed) < 0)
+				goto err;
+		}
+	}
+
+	switch (state->algo) {
+	case STV090x_WARM_SEARCH:
+		/* The symbol rate and the exact
+		 * carrier Frequency are known
+		 */
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0)
+			goto err;
+		break;
+
+	case STV090x_COLD_SEARCH:
+		/* The symbol rate is known */
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
+			goto err;
+		break;
+
+	default:
+		break;
+	}
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_get_agc2_min_level(struct stv090x_state *state)
+{
+	u32 agc2_min = 0, agc2 = 0, freq_init, freq_step, reg;
+	s32 i, j, steps, dir;
+
+	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
+		goto err;
+	reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+	STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 1);
+	STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 1);
+	if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+		goto err;
+
+	if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x83) < 0) /* SR = 65 Msps Max */
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xc0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x82) < 0) /* SR= 400 ksps Min */
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, SFRLOW0, 0xa0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x00) < 0) /* stop acq @ coarse carrier state */
+		goto err;
+	if (stv090x_set_srate(state, 1000000) < 0)
+		goto err;
+
+	steps  = -1 + state->search_range / 1000000;
+	steps /= 2;
+	steps  = (2 * steps) + 1;
+	if (steps < 0)
+		steps = 1;
+
+	dir = 1;
+	freq_step = (1000000 * 256) / (state->mclk / 256);
+	freq_init = 0;
+
+	for (i = 0; i < steps; i++) {
+		if (dir > 0)
+			freq_init = freq_init + (freq_step * i);
+		else
+			freq_init = freq_init - (freq_step * i);
+
+		dir = -1;
+
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Demod RESET */
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRINIT1, (freq_init >> 8) & 0xff) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRINIT0, freq_init & 0xff) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x58) < 0) /* Demod RESET */
+			goto err;
+		msleep(10);
+		for (j = 0; j < 10; j++) {
+			agc2 += STV090x_READ_DEMOD(state, AGC2I1) << 8;
+			agc2 |= STV090x_READ_DEMOD(state, AGC2I0);
+		}
+		agc2 /= 10;
+		agc2_min = 0xffff;
+		if (agc2 < 0xffff)
+			agc2_min = agc2;
+	}
+
+	return agc2_min;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static u32 stv090x_get_srate(struct stv090x_state *state, u32 clk)
+{
+	u8 r3, r2, r1, r0;
+	s32 srate, int_1, int_2, tmp_1, tmp_2;
+
+	r3 = STV090x_READ_DEMOD(state, SFR3);
+	r2 = STV090x_READ_DEMOD(state, SFR2);
+	r1 = STV090x_READ_DEMOD(state, SFR1);
+	r0 = STV090x_READ_DEMOD(state, SFR0);
+
+	srate = ((r3 << 24) | (r2 << 16) | (r1 <<  8) | r0);
+
+	int_1 = clk >> 16;
+	int_2 = srate >> 16;
+
+	tmp_1 = clk % 0x10000;
+	tmp_2 = srate % 0x10000;
+
+	srate = (int_1 * int_2) +
+		((int_1 * tmp_2) >> 16) +
+		((int_2 * tmp_1) >> 16);
+
+	return srate;
+}
+
+static u32 stv090x_srate_srch_coarse(struct stv090x_state *state)
+{
+	struct dvb_frontend *fe = &state->frontend;
+
+	int tmg_lock = 0, i;
+	s32 tmg_cpt = 0, dir = 1, steps, cur_step = 0, freq;
+	u32 srate_coarse = 0, agc2 = 0, car_step = 1200, reg;
+
+	reg = STV090x_READ_DEMOD(state, DMDISTATE);
+	STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x1f); /* Demod RESET */
+	if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, TMGCFG, 0x12) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0xf0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0xe0) < 0)
+		goto err;
+	reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+	STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 1);
+	STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 1);
+	if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+		goto err;
+
+	if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x83) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, SFRUP0, 0xc0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x82) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, SFRLOW0, 0xa0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x60) < 0)
+		goto err;
+
+	if (state->dev_ver >= 0x30) {
+		if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x99) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x95) < 0)
+			goto err;
+
+	} else if (state->dev_ver >= 0x20) {
+		if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x6a) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x95) < 0)
+			goto err;
+	}
+
+	if (state->srate <= 2000000)
+		car_step = 1000;
+	else if (state->srate <= 5000000)
+		car_step = 2000;
+	else if (state->srate <= 12000000)
+		car_step = 3000;
+	else
+		car_step = 5000;
+
+	steps  = -1 + ((state->search_range / 1000) / car_step);
+	steps /= 2;
+	steps  = (2 * steps) + 1;
+	if (steps < 0)
+		steps = 1;
+	else if (steps > 10) {
+		steps = 11;
+		car_step = (state->search_range / 1000) / 10;
+	}
+	cur_step = 0;
+	dir = 1;
+	freq = state->frequency;
+
+	while ((!tmg_lock) && (cur_step < steps)) {
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5f) < 0) /* Demod RESET */
+			goto err;
+		reg = STV090x_READ_DEMOD(state, DMDISTATE);
+		STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x00); /* trigger acquisition */
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0)
+			goto err;
+		msleep(50);
+		for (i = 0; i < 10; i++) {
+			reg = STV090x_READ_DEMOD(state, DSTATUS);
+			if (STV090x_GETFIELD_Px(reg, TMGLOCK_QUALITY_FIELD) >= 2)
+				tmg_cpt++;
+			agc2 += STV090x_READ_DEMOD(state, AGC2I1) << 8;
+			agc2 |= STV090x_READ_DEMOD(state, AGC2I0);
+		}
+		agc2 /= 10;
+		srate_coarse = stv090x_get_srate(state, state->mclk);
+		cur_step++;
+		dir *= -1;
+		if ((tmg_cpt >= 5) && (agc2 < 0x1f00) && (srate_coarse < 55000000) && (srate_coarse > 850000))
+			tmg_lock = 1;
+		else if (cur_step < steps) {
+			if (dir > 0)
+				freq += cur_step * car_step;
+			else
+				freq -= cur_step * car_step;
+
+			/* Setup tuner */
+			if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+				goto err;
+
+			if (state->config->tuner_set_frequency) {
+				if (state->config->tuner_set_frequency(fe, state->frequency) < 0)
+					goto err;
+			}
+
+			if (state->config->tuner_set_bandwidth) {
+				if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
+					goto err;
+			}
+
+			if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+				goto err;
+
+			msleep(50);
+
+			if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+				goto err;
+
+			if (state->config->tuner_get_status) {
+				if (state->config->tuner_get_status(fe, &reg) < 0)
+					goto err;
+			}
+
+			if (reg)
+				dprintk(FE_DEBUG, 1, "Tuner phase locked");
+			else
+				dprintk(FE_DEBUG, 1, "Tuner unlocked");
+
+			if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+				goto err;
+
+		}
+	}
+	if (!tmg_lock)
+		srate_coarse = 0;
+	else
+		srate_coarse = stv090x_get_srate(state, state->mclk);
+
+	return srate_coarse;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static u32 stv090x_srate_srch_fine(struct stv090x_state *state)
+{
+	u32 srate_coarse, freq_coarse, sym, reg;
+
+	srate_coarse = stv090x_get_srate(state, state->mclk);
+	freq_coarse  = STV090x_READ_DEMOD(state, CFR2) << 8;
+	freq_coarse |= STV090x_READ_DEMOD(state, CFR1);
+	sym = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
+
+	if (sym < state->srate)
+		srate_coarse = 0;
+	else {
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) /* Demod RESET */
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0x01) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0x20) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0x00) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, TMGCFG, 0xd2) < 0)
+			goto err;
+		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+		STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00);
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+			goto err;
+
+		if (state->dev_ver >= 0x30) {
+			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x79) < 0)
+				goto err;
+		} else if (state->dev_ver >= 0x20) {
+			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
+				goto err;
+		}
+
+		if (srate_coarse > 3000000) {
+			sym  = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
+			sym  = (sym / 1000) * 65536;
+			sym /= (state->mclk / 1000);
+			if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0)
+				goto err;
+			sym  = 10 * (srate_coarse / 13); /* SFRLOW = SFR - 30% */
+			sym  = (sym / 1000) * 65536;
+			sym /= (state->mclk / 1000);
+			if (STV090x_WRITE_DEMOD(state, SFRLOW1, (sym >> 8) & 0x7f) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, SFRLOW0, sym & 0xff) < 0)
+				goto err;
+			sym  = (srate_coarse / 1000) * 65536;
+			sym /= (state->mclk / 1000);
+			if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, SFRINIT0, sym & 0xff) < 0)
+				goto err;
+		} else {
+			sym  = 13 * (srate_coarse / 10); /* SFRUP = SFR + 30% */
+			sym  = (sym / 100) * 65536;
+			sym /= (state->mclk / 100);
+			if (STV090x_WRITE_DEMOD(state, SFRUP1, (sym >> 8) & 0x7f) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, SFRUP0, sym & 0xff) < 0)
+				goto err;
+			sym  = 10 * (srate_coarse / 14); /* SFRLOW = SFR - 30% */
+			sym  = (sym / 100) * 65536;
+			sym /= (state->mclk / 100);
+			if (STV090x_WRITE_DEMOD(state, SFRLOW1, (sym >> 8) & 0x7f) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, SFRLOW0, sym & 0xff) < 0)
+				goto err;
+			sym  = (srate_coarse / 100) * 65536;
+			sym /= (state->mclk / 100);
+			if (STV090x_WRITE_DEMOD(state, SFRINIT1, (sym >> 8) & 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, SFRINIT0, sym & 0xff) < 0)
+				goto err;
+		}
+		if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x20) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRINIT1, (freq_coarse >> 8) & 0xff) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRINIT0, freq_coarse & 0xff) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0) /* trigger acquisition */
+			goto err;
+	}
+
+	return srate_coarse;
+
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_get_dmdlock(struct stv090x_state *state, s32 timeout)
+{
+	s32 timer = 0, lock = 0;
+	u32 reg;
+	u8 stat;
+
+	while ((timer < timeout) && (!lock)) {
+		reg = STV090x_READ_DEMOD(state, DMDSTATE);
+		stat = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD);
+
+		switch (stat) {
+		case 0: /* searching */
+		case 1: /* first PLH detected */
+		default:
+			dprintk(FE_DEBUG, 1, "Demodulator searching ..");
+			lock = 0;
+			break;
+		case 2: /* DVB-S2 mode */
+		case 3: /* DVB-S1/legacy mode */
+			reg = STV090x_READ_DEMOD(state, DSTATUS);
+			lock = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD);
+			break;
+		}
+
+		if (!lock)
+			msleep(10);
+		else
+			dprintk(FE_DEBUG, 1, "Demodulator acquired LOCK");
+
+		timer += 10;
+	}
+	return lock;
+}
+
+static int stv090x_blind_search(struct stv090x_state *state)
+{
+	u32 agc2, reg, srate_coarse;
+	s32 timeout_dmd = 500, cpt_fail, agc2_ovflw, i;
+	u8 k_ref, k_max, k_min;
+	int coarse_fail, lock;
+
+	k_max = 120;
+	k_min = 30;
+
+	agc2 = stv090x_get_agc2_min_level(state);
+
+	if (agc2 > STV090x_SEARCH_AGC2_TH(state->dev_ver)) {
+		lock = 0;
+	} else {
+
+		if (state->dev_ver <= 0x20) {
+			if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0)
+				goto err;
+		} else {
+			/* > Cut 3 */
+			if (STV090x_WRITE_DEMOD(state, CARCFG, 0x06) < 0)
+				goto err;
+		}
+
+		if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0)
+			goto err;
+
+		if (state->dev_ver >= 0x20) {
+			if (STV090x_WRITE_DEMOD(state, EQUALCFG, 0x41) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x82) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x00) < 0) /* set viterbi hysteresis */
+				goto err;
+		}
+
+		k_ref = k_max;
+		do {
+			if (STV090x_WRITE_DEMOD(state, KREFTMG, k_ref) < 0)
+				goto err;
+			if (stv090x_srate_srch_coarse(state) != 0) {
+				srate_coarse = stv090x_srate_srch_fine(state);
+				if (srate_coarse != 0) {
+					stv090x_get_lock_tmg(state);
+					lock = stv090x_get_dmdlock(state, timeout_dmd);
+				} else {
+					lock = 0;
+				}
+			} else {
+				cpt_fail = 0;
+				agc2_ovflw = 0;
+				for (i = 0; i < 10; i++) {
+					agc2  = STV090x_READ_DEMOD(state, AGC2I1) << 8;
+					agc2 |= STV090x_READ_DEMOD(state, AGC2I0);
+					if (agc2 >= 0xff00)
+						agc2_ovflw++;
+					reg = STV090x_READ_DEMOD(state, DSTATUS2);
+					if ((STV090x_GETFIELD_Px(reg, CFR_OVERFLOW_FIELD) == 0x01) &&
+					    (STV090x_GETFIELD_Px(reg, DEMOD_DELOCK_FIELD) == 0x01))
+
+						cpt_fail++;
+				}
+				if ((cpt_fail > 7) || (agc2_ovflw > 7))
+					coarse_fail = 1;
+
+				lock = 0;
+			}
+			k_ref -= 30;
+		} while ((k_ref >= k_min) && (!lock) && (!coarse_fail));
+	}
+
+	return lock;
+
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_chk_tmg(struct stv090x_state *state)
+{
+	u32 reg;
+	s32 tmg_cpt = 0, i;
+	u8 freq, tmg_thh, tmg_thl;
+	int tmg_lock;
+
+	freq = STV090x_READ_DEMOD(state, CARFREQ);
+	tmg_thh = STV090x_READ_DEMOD(state, TMGTHRISE);
+	tmg_thl = STV090x_READ_DEMOD(state, TMGTHFALL);
+	if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0x20) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0x00) < 0)
+		goto err;
+
+	reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+	STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00); /* stop carrier offset search */
+	if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, RTC, 0x80) < 0)
+		goto err;
+
+	if (STV090x_WRITE_DEMOD(state, RTCS2, 0x40) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x00) < 0)
+		goto err;
+
+	if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0) /* set car ofset to 0 */
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x65) < 0)
+		goto err;
+
+	if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0) /* trigger acquisition */
+		goto err;
+	msleep(10);
+
+	for (i = 0; i < 10; i++) {
+		reg = STV090x_READ_DEMOD(state, DSTATUS);
+		if (STV090x_GETFIELD_Px(reg, TMGLOCK_QUALITY_FIELD) >= 2)
+			tmg_cpt++;
+		msleep(1);
+	}
+	if (tmg_cpt >= 3)
+		tmg_lock = 1;
+
+	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, RTC, 0x88) < 0) /* DVB-S1 timing */
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0) /* DVB-S2 timing */
+		goto err;
+
+	if (STV090x_WRITE_DEMOD(state, CARFREQ, freq) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, TMGTHRISE, tmg_thh) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, TMGTHFALL, tmg_thl) < 0)
+		goto err;
+
+	return	tmg_lock;
+
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
+{
+	struct dvb_frontend *fe = &state->frontend;
+
+	u32 reg;
+	s32 car_step, steps, cur_step, dir, freq, timeout_lock;
+	int lock = 0;
+
+	if (state->srate >= 10000000)
+		timeout_lock = timeout_dmd / 3;
+	else
+		timeout_lock = timeout_dmd / 2;
+
+	lock = stv090x_get_dmdlock(state, timeout_lock); /* cold start wait */
+	if (!lock) {
+		if (state->srate >= 10000000) {
+			if (stv090x_chk_tmg(state)) {
+				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
+					goto err;
+				lock = stv090x_get_dmdlock(state, timeout_dmd);
+			} else {
+				lock = 0;
+			}
+		} else {
+			if (state->srate <= 4000000)
+				car_step = 1000;
+			else if (state->srate <= 7000000)
+				car_step = 2000;
+			else if (state->srate <= 10000000)
+				car_step = 3000;
+			else
+				car_step = 5000;
+
+			steps  = (state->search_range / 1000) / car_step;
+			steps /= 2;
+			steps  = 2 * (steps + 1);
+			if (steps < 0)
+				steps = 2;
+			else if (steps > 12)
+				steps = 12;
+
+			cur_step = 1;
+			dir = 1;
+
+			if (!lock) {
+				freq = state->frequency;
+				state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
+				while ((cur_step <= steps) && (!lock)) {
+					if (dir > 0)
+						freq += cur_step * car_step;
+					else
+						freq -= cur_step * car_step;
+
+					/* Setup tuner */
+					if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+						goto err;
+
+					if (state->config->tuner_set_frequency) {
+						if (state->config->tuner_set_frequency(fe, state->frequency) < 0)
+							goto err;
+					}
+
+					if (state->config->tuner_set_bandwidth) {
+						if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
+							goto err;
+					}
+
+					if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+						goto err;
+
+					msleep(50);
+
+					if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+						goto err;
+
+					if (state->config->tuner_get_status) {
+						if (state->config->tuner_get_status(fe, &reg) < 0)
+							goto err;
+					}
+
+					if (reg)
+						dprintk(FE_DEBUG, 1, "Tuner phase locked");
+					else
+						dprintk(FE_DEBUG, 1, "Tuner unlocked");
+
+					if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+						goto err;
+
+					STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
+					if (state->delsys == STV090x_DVBS2) {
+						reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+						STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
+						STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
+						if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+							goto err;
+						STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
+						STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
+						if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+							goto err;
+					}
+					if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
+						goto err;
+					if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
+						goto err;
+					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
+						goto err;
+					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
+						goto err;
+					lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
+
+					dir *= -1;
+					cur_step++;
+				}
+			}
+		}
+	}
+
+	return lock;
+
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_get_loop_params(struct stv090x_state *state, s32 *freq_inc, s32 *timeout_sw, s32 *steps)
+{
+	s32 timeout, inc, steps_max, srate, car_max;
+
+	srate = state->srate;
+	car_max = state->search_range / 1000;
+	car_max += car_max / 10;
+	car_max  = 65536 * (car_max / 2);
+	car_max /= (state->mclk / 1000);
+
+	if (car_max > 0x4000)
+		car_max = 0x4000 ; /* maxcarrier should be<= +-1/4 Mclk */
+
+	inc  = srate;
+	inc /= state->mclk / 1000;
+	inc *= 256;
+	inc *= 256;
+	inc /= 1000;
+
+	switch (state->search_mode) {
+	case STV090x_SEARCH_DVBS1:
+	case STV090x_SEARCH_DSS:
+		inc *= 3; /* freq step = 3% of srate */
+		timeout = 20;
+		break;
+
+	case STV090x_SEARCH_DVBS2:
+		inc *= 4;
+		timeout = 25;
+		break;
+
+	case STV090x_SEARCH_AUTO:
+	default:
+		inc *= 3;
+		timeout = 25;
+		break;
+	}
+	inc /= 100;
+	if ((inc > car_max) || (inc < 0))
+		inc = car_max / 2; /* increment <= 1/8 Mclk */
+
+	timeout *= 27500; /* 27.5 Msps reference */
+	if (srate > 0)
+		timeout /= (srate / 1000);
+
+	if ((timeout > 100) || (timeout < 0))
+		timeout = 100;
+
+	steps_max = (car_max / inc) + 1; /* min steps = 3 */
+	if ((steps_max > 100) || (steps_max < 0)) {
+		steps_max = 100; /* max steps <= 100 */
+		inc = car_max / steps_max;
+	}
+	*freq_inc = inc;
+	*timeout_sw = timeout;
+	*steps = steps_max;
+
+	return 0;
+}
+
+static int stv090x_chk_signal(struct stv090x_state *state)
+{
+	s32 offst_car, agc2, car_max;
+	int no_signal;
+
+	offst_car  = STV090x_READ_DEMOD(state, CFR2) << 8;
+	offst_car |= STV090x_READ_DEMOD(state, CFR1);
+	offst_car = comp2(offst_car, 16);
+
+	agc2  = STV090x_READ_DEMOD(state, AGC2I1) << 8;
+	agc2 |= STV090x_READ_DEMOD(state, AGC2I0);
+	car_max = state->search_range / 1000;
+
+	car_max += (car_max / 10); /* 10% margin */
+	car_max  = (65536 * car_max / 2);
+	car_max /= state->mclk / 1000;
+
+	if (car_max > 0x4000)
+		car_max = 0x4000;
+
+	if ((agc2 > 0x2000) || (offst_car > 2 * car_max) || (offst_car < -2 * car_max)) {
+		no_signal = 1;
+		dprintk(FE_DEBUG, 1, "No Signal");
+	} else {
+		no_signal = 0;
+		dprintk(FE_DEBUG, 1, "Found Signal");
+	}
+
+	return no_signal;
+}
+
+static int stv090x_search_car_loop(struct stv090x_state *state, s32 inc, s32 timeout, int zigzag, s32 steps_max)
+{
+	int no_signal, lock = 0;
+	s32 cpt_step = 0, offst_freq, car_max;
+	u32 reg;
+
+	car_max  = state->search_range / 1000;
+	car_max += (car_max / 10);
+	car_max  = (65536 * car_max / 2);
+	car_max /= (state->mclk / 1000);
+	if (car_max > 0x4000)
+		car_max = 0x4000;
+
+	if (zigzag)
+		offst_freq = 0;
+	else
+		offst_freq = -car_max + inc;
+
+	do {
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRINIT1, ((offst_freq / 256) & 0xff)) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRINIT0, offst_freq & 0xff) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0)
+			goto err;
+
+		reg = STV090x_READ_DEMOD(state, PDELCTRL1);
+		STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x1); /* stop DVB-S2 packet delin */
+		if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
+			goto err;
+
+		if (zigzag) {
+			if (offst_freq >= 0)
+				offst_freq = -offst_freq - 2 * inc;
+			else
+				offst_freq = -offst_freq;
+		} else {
+			offst_freq += 2 * inc;
+		}
+
+		cpt_step++;
+
+		lock = stv090x_get_dmdlock(state, timeout);
+		no_signal = stv090x_chk_signal(state);
+
+	} while ((!lock) &&
+		 (!no_signal) &&
+		  ((offst_freq - inc) < car_max) &&
+		  ((offst_freq + inc) > -car_max) &&
+		  (cpt_step < steps_max));
+
+	reg = STV090x_READ_DEMOD(state, PDELCTRL1);
+	STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0);
+	if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
+			goto err;
+
+	return lock;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_sw_algo(struct stv090x_state *state)
+{
+	int no_signal, zigzag, lock = 0;
+	u32 reg;
+
+	s32 dvbs2_fly_wheel;
+	s32 inc, timeout_step, trials, steps_max;
+
+	/* get params */
+	stv090x_get_loop_params(state, &inc, &timeout_step, &steps_max);
+
+	switch (state->search_mode) {
+	case STV090x_SEARCH_DVBS1:
+	case STV090x_SEARCH_DSS:
+		/* accelerate the frequency detector */
+		if (state->dev_ver >= 0x20) {
+			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x3B) < 0)
+				goto err;
+		}
+
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x49) < 0)
+			goto err;
+		zigzag = 0;
+		break;
+
+	case STV090x_SEARCH_DVBS2:
+		if (state->dev_ver >= 0x20) {
+			if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
+				goto err;
+		}
+
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x89) < 0)
+			goto err;
+		zigzag = 1;
+		break;
+
+	case STV090x_SEARCH_AUTO:
+	default:
+		/* accelerate the frequency detector */
+		if (state->dev_ver >= 0x20) {
+			if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x3b) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
+				goto err;
+		}
+
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0xc9) < 0)
+			goto err;
+		zigzag = 0;
+		break;
+	}
+
+	trials = 0;
+	do {
+		lock = stv090x_search_car_loop(state, inc, timeout_step, zigzag, steps_max);
+		no_signal = stv090x_chk_signal(state);
+		trials++;
+
+		/*run the SW search 2 times maximum*/
+		if (lock || no_signal || (trials == 2)) {
+			/*Check if the demod is not losing lock in DVBS2*/
+			if (state->dev_ver >= 0x20) {
+				if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0)
+					goto err;
+			}
+
+			reg = STV090x_READ_DEMOD(state, DMDSTATE);
+			if ((lock) && (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == STV090x_DVBS2)) {
+				/*Check if the demod is not losing lock in DVBS2*/
+				msleep(timeout_step);
+				reg = STV090x_READ_DEMOD(state, DMDFLYW);
+				dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD);
+				if (dvbs2_fly_wheel < 0xd) {	 /*if correct frames is decrementing */
+					msleep(timeout_step);
+					reg = STV090x_READ_DEMOD(state, DMDFLYW);
+					dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD);
+				}
+				if (dvbs2_fly_wheel < 0xd) {
+					/*FALSE lock, The demod is loosing lock */
+					lock = 0;
+					if (trials < 2) {
+						if (state->dev_ver >= 0x20) {
+							if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x79) < 0)
+								goto err;
+						}
+
+						if (STV090x_WRITE_DEMOD(state, DMDCFGMD, 0x89) < 0)
+							goto err;
+					}
+				}
+			}
+		}
+	} while ((!lock) && (trials < 2) && (!no_signal));
+
+	return lock;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static enum stv090x_delsys stv090x_get_std(struct stv090x_state *state)
+{
+	u32 reg;
+	enum stv090x_delsys delsys;
+
+	reg = STV090x_READ_DEMOD(state, DMDSTATE);
+	if (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == 2)
+		delsys = STV090x_DVBS2;
+	else if (STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD) == 3) {
+		reg = STV090x_READ_DEMOD(state, FECM);
+		if (STV090x_GETFIELD_Px(reg, DSS_DVB_FIELD) == 1)
+			delsys = STV090x_DSS;
+		else
+			delsys = STV090x_DVBS1;
+	} else {
+		delsys = STV090x_ERROR;
+	}
+
+	return delsys;
+}
+
+/* in Hz */
+static s32 stv090x_get_car_freq(struct stv090x_state *state, u32 mclk)
+{
+	s32 derot, int_1, int_2, tmp_1, tmp_2;
+
+	derot  = STV090x_READ_DEMOD(state, CFR2) << 16;
+	derot |= STV090x_READ_DEMOD(state, CFR1) <<  8;
+	derot |= STV090x_READ_DEMOD(state, CFR0);
+
+	derot = comp2(derot, 24);
+	int_1 = state->mclk >> 12;
+	int_2 = derot >> 12;
+
+	/* carrier_frequency = MasterClock * Reg / 2^24 */
+	tmp_1 = state->mclk % 0x1000;
+	tmp_2 = derot % 0x1000;
+
+	derot = (int_1 * int_2) +
+		((int_1 * tmp_2) >> 12) +
+		((int_1 * tmp_1) >> 12);
+
+	return derot;
+}
+
+static int stv090x_get_viterbi(struct stv090x_state *state)
+{
+	u32 reg, rate;
+
+	reg = STV090x_READ_DEMOD(state, VITCURPUN);
+	rate = STV090x_GETFIELD_Px(reg, VIT_CURPUN_FIELD);
+
+	switch (rate) {
+	case 13:
+		state->fec = STV090x_PR12;
+		break;
+
+	case 18:
+		state->fec = STV090x_PR23;
+		break;
+
+	case 21:
+		state->fec = STV090x_PR34;
+		break;
+
+	case 24:
+		state->fec = STV090x_PR56;
+		break;
+
+	case 25:
+		state->fec = STV090x_PR67;
+		break;
+
+	case 26:
+		state->fec = STV090x_PR78;
+		break;
+
+	default:
+		state->fec = STV090x_PRERR;
+		break;
+	}
+
+	return 0;
+}
+
+static enum stv090x_signal_state stv090x_get_sig_params(struct stv090x_state *state)
+{
+	struct dvb_frontend *fe = &state->frontend;
+
+	u8 tmg;
+	u32 reg;
+	s32 i = 0, offst_freq;
+
+	msleep(5);
+
+	if (state->algo == STV090x_BLIND_SEARCH) {
+		tmg = STV090x_READ_DEMOD(state, TMGREG2);
+		STV090x_WRITE_DEMOD(state, SFRSTEP, 0x5c);
+		while ((i <= 50) && (tmg != 0) && (tmg != 0xff)) {
+			tmg = STV090x_READ_DEMOD(state, TMGREG2);
+			msleep(5);
+			i += 5;
+		}
+	}
+	state->delsys = stv090x_get_std(state);
+
+	if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+		goto err;
+
+	if (state->config->tuner_get_frequency) {
+		if (state->config->tuner_get_frequency(fe, &state->frequency) < 0)
+			goto err;
+	}
+
+	if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+		goto err;
+
+	offst_freq = stv090x_get_car_freq(state, state->mclk) / 1000;
+	state->frequency += offst_freq;
+
+	if (stv090x_get_viterbi(state) < 0)
+		goto err;
+
+	reg = STV090x_READ_DEMOD(state, DMDMODCOD);
+	state->modcod = STV090x_GETFIELD_Px(reg, DEMOD_MODCOD_FIELD);
+	state->pilots = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) & 0x01;
+	state->frame_len = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) >> 1;
+	reg = STV090x_READ_DEMOD(state, TMGOBS);
+	state->rolloff = STV090x_GETFIELD_Px(reg, ROLLOFF_STATUS_FIELD);
+	reg = STV090x_READ_DEMOD(state, FECM);
+	state->inversion = STV090x_GETFIELD_Px(reg, IQINV_FIELD);
+
+	if ((state->algo == STV090x_BLIND_SEARCH) || (state->srate < 10000000)) {
+
+		if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+			goto err;
+
+		if (state->config->tuner_get_frequency) {
+			if (state->config->tuner_get_frequency(fe, &state->frequency) < 0)
+				goto err;
+		}
+
+		if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+			goto err;
+
+		if (abs(offst_freq) <= ((state->search_range / 2000) + 500))
+			return STV090x_RANGEOK;
+		else if (abs(offst_freq) <= (stv090x_car_width(state->srate, state->rolloff) / 2000))
+			return STV090x_RANGEOK;
+		else
+			return STV090x_OUTOFRANGE; /* Out of Range */
+	} else {
+		if (abs(offst_freq) <= ((state->search_range / 2000) + 500))
+			return STV090x_RANGEOK;
+		else
+			return STV090x_OUTOFRANGE;
+	}
+
+	return STV090x_OUTOFRANGE;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static u32 stv090x_get_tmgoffst(struct stv090x_state *state, u32 srate)
+{
+	s32 offst_tmg;
+
+	offst_tmg  = STV090x_READ_DEMOD(state, TMGREG2) << 16;
+	offst_tmg |= STV090x_READ_DEMOD(state, TMGREG1) <<  8;
+	offst_tmg |= STV090x_READ_DEMOD(state, TMGREG0);
+
+	offst_tmg = comp2(offst_tmg, 24); /* 2's complement */
+	if (!offst_tmg)
+		offst_tmg = 1;
+
+	offst_tmg  = ((s32) srate * 10) / ((s32) 0x1000000 / offst_tmg);
+	offst_tmg /= 320;
+
+	return offst_tmg;
+}
+
+static u8 stv090x_optimize_carloop(struct stv090x_state *state, enum stv090x_modcod modcod, s32 pilots)
+{
+	u8 aclc = 0x29;
+	s32 i;
+	struct stv090x_long_frame_crloop *car_loop, *car_loop_qpsk_low, *car_loop_apsk_low;
+
+	if (state->dev_ver == 0x20) {
+		car_loop		= stv090x_s2_crl_cut20;
+		car_loop_qpsk_low	= stv090x_s2_lowqpsk_crl_cut20;
+		car_loop_apsk_low	= stv090x_s2_apsk_crl_cut20;
+	} else {
+		/* >= Cut 3 */
+		car_loop		= stv090x_s2_crl_cut30;
+		car_loop_qpsk_low	= stv090x_s2_lowqpsk_crl_cut30;
+		car_loop_apsk_low	= stv090x_s2_apsk_crl_cut30;
+	}
+
+	if (modcod < STV090x_QPSK_12) {
+		i = 0;
+		while ((i < 3) && (modcod != car_loop_qpsk_low[i].modcod))
+			i++;
+
+		if (i >= 3)
+			i = 2;
+
+	} else {
+		i = 0;
+		while ((i < 14) && (modcod != car_loop[i].modcod))
+			i++;
+
+		if (i >= 14) {
+			i = 0;
+			while ((i < 11) && (modcod != car_loop_apsk_low[i].modcod))
+				i++;
+
+			if (i >= 11)
+				i = 10;
+		}
+	}
+
+	if (modcod <= STV090x_QPSK_25) {
+		if (pilots) {
+			if (state->srate <= 3000000)
+				aclc = car_loop_qpsk_low[i].crl_pilots_on_2;
+			else if (state->srate <= 7000000)
+				aclc = car_loop_qpsk_low[i].crl_pilots_on_5;
+			else if (state->srate <= 15000000)
+				aclc = car_loop_qpsk_low[i].crl_pilots_on_10;
+			else if (state->srate <= 25000000)
+				aclc = car_loop_qpsk_low[i].crl_pilots_on_20;
+			else
+				aclc = car_loop_qpsk_low[i].crl_pilots_on_30;
+		} else {
+			if (state->srate <= 3000000)
+				aclc = car_loop_qpsk_low[i].crl_pilots_off_2;
+			else if (state->srate <= 7000000)
+				aclc = car_loop_qpsk_low[i].crl_pilots_off_5;
+			else if (state->srate <= 15000000)
+				aclc = car_loop_qpsk_low[i].crl_pilots_off_10;
+			else if (state->srate <= 25000000)
+				aclc = car_loop_qpsk_low[i].crl_pilots_off_20;
+			else
+				aclc = car_loop_qpsk_low[i].crl_pilots_off_30;
+		}
+
+	} else if (modcod <= STV090x_8PSK_910) {
+		if (pilots) {
+			if (state->srate <= 3000000)
+				aclc = car_loop[i].crl_pilots_on_2;
+			else if (state->srate <= 7000000)
+				aclc = car_loop[i].crl_pilots_on_5;
+			else if (state->srate <= 15000000)
+				aclc = car_loop[i].crl_pilots_on_10;
+			else if (state->srate <= 25000000)
+				aclc = car_loop[i].crl_pilots_on_20;
+			else
+				aclc = car_loop[i].crl_pilots_on_30;
+		} else {
+			if (state->srate <= 3000000)
+				aclc = car_loop[i].crl_pilots_off_2;
+			else if (state->srate <= 7000000)
+				aclc = car_loop[i].crl_pilots_off_5;
+			else if (state->srate <= 15000000)
+				aclc = car_loop[i].crl_pilots_off_10;
+			else if (state->srate <= 25000000)
+				aclc = car_loop[i].crl_pilots_off_20;
+			else
+				aclc = car_loop[i].crl_pilots_off_30;
+		}
+	} else { /* 16APSK and 32APSK */
+		if (state->srate <= 3000000)
+			aclc = car_loop_apsk_low[i].crl_pilots_on_2;
+		else if (state->srate <= 7000000)
+			aclc = car_loop_apsk_low[i].crl_pilots_on_5;
+		else if (state->srate <= 15000000)
+			aclc = car_loop_apsk_low[i].crl_pilots_on_10;
+		else if (state->srate <= 25000000)
+			aclc = car_loop_apsk_low[i].crl_pilots_on_20;
+		else
+			aclc = car_loop_apsk_low[i].crl_pilots_on_30;
+	}
+
+	return aclc;
+}
+
+static u8 stv090x_optimize_carloop_short(struct stv090x_state *state)
+{
+	struct stv090x_short_frame_crloop *short_crl;
+	s32 index = 0;
+	u8 aclc = 0x0b;
+
+	switch (state->modulation) {
+	case STV090x_QPSK:
+	default:
+		index = 0;
+		break;
+	case STV090x_8PSK:
+		index = 1;
+		break;
+	case STV090x_16APSK:
+		index = 2;
+		break;
+	case STV090x_32APSK:
+		index = 3;
+		break;
+	}
+
+	if (state->dev_ver >= 0x30)
+		short_crl = stv090x_s2_short_crl_cut20;
+	else if (state->dev_ver >= 0x20)
+		short_crl = stv090x_s2_short_crl_cut30;
+
+	if (state->srate <= 3000000)
+		aclc = short_crl[index].crl_2;
+	else if (state->srate <= 7000000)
+		aclc = short_crl[index].crl_5;
+	else if (state->srate <= 15000000)
+		aclc = short_crl[index].crl_10;
+	else if (state->srate <= 25000000)
+		aclc = short_crl[index].crl_20;
+	else
+		aclc = short_crl[index].crl_30;
+
+	return aclc;
+}
+
+static int stv090x_optimize_track(struct stv090x_state *state)
+{
+	struct dvb_frontend *fe = &state->frontend;
+
+	enum stv090x_rolloff rolloff;
+	enum stv090x_modcod modcod;
+
+	s32 srate, pilots, aclc, f_1, f_0, i = 0, blind_tune = 0;
+	u32 reg;
+
+	srate  = stv090x_get_srate(state, state->mclk);
+	srate += stv090x_get_tmgoffst(state, srate);
+
+	switch (state->delsys) {
+	case STV090x_DVBS1:
+	case STV090x_DSS:
+		if (state->algo == STV090x_SEARCH_AUTO) {
+			reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+			STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
+			STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
+			if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+				goto err;
+		}
+		reg = STV090x_READ_DEMOD(state, DEMOD);
+		STV090x_SETFIELD_Px(reg, ROLLOFF_CONTROL_FIELD, state->rolloff);
+		STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 0x01);
+		if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
+			goto err;
+
+		if (state->dev_ver >= 0x30) {
+			if (stv090x_get_viterbi(state) < 0)
+				goto err;
+
+			if (state->fec == STV090x_PR12) {
+				if (STV090x_WRITE_DEMOD(state, GAUSSR0, 0x98) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, CCIR0, 0x18) < 0)
+					goto err;
+			} else {
+				if (STV090x_WRITE_DEMOD(state, GAUSSR0, 0x18) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, CCIR0, 0x18) < 0)
+					goto err;
+			}
+		}
+
+		if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x75) < 0)
+			goto err;
+		break;
+
+	case STV090x_DVBS2:
+		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
+		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, ACLC, 0) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, BCLC, 0) < 0)
+			goto err;
+		if (state->frame_len == STV090x_LONG_FRAME) {
+			reg = STV090x_READ_DEMOD(state, DMDMODCOD);
+			modcod = STV090x_GETFIELD_Px(reg, DEMOD_MODCOD_FIELD);
+			pilots = STV090x_GETFIELD_Px(reg, DEMOD_TYPE_FIELD) & 0x01;
+			aclc = stv090x_optimize_carloop(state, modcod, pilots);
+			if (modcod <= STV090x_QPSK_910) {
+				STV090x_WRITE_DEMOD(state, ACLC2S2Q, aclc);
+			} else if (modcod <= STV090x_8PSK_910) {
+				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, ACLC2S28, aclc) < 0)
+					goto err;
+			}
+			if ((state->demod_mode == STV090x_SINGLE) && (modcod > STV090x_8PSK_910)) {
+				if (modcod <= STV090x_16APSK_910) {
+					if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
+						goto err;
+					if (STV090x_WRITE_DEMOD(state, ACLC2S216A, aclc) < 0)
+						goto err;
+				} else {
+					if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
+						goto err;
+					if (STV090x_WRITE_DEMOD(state, ACLC2S232A, aclc) < 0)
+						goto err;
+				}
+			}
+		} else {
+			/*Carrier loop setting for short frame*/
+			aclc = stv090x_optimize_carloop_short(state);
+			if (state->modulation == STV090x_QPSK) {
+				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, aclc) < 0)
+					goto err;
+			} else if (state->modulation == STV090x_8PSK) {
+				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, ACLC2S28, aclc) < 0)
+					goto err;
+			} else if (state->modulation == STV090x_16APSK) {
+				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, ACLC2S216A, aclc) < 0)
+					goto err;
+			} else if (state->modulation == STV090x_32APSK)  {
+				if (STV090x_WRITE_DEMOD(state, ACLC2S2Q, 0x2a) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, ACLC2S232A, aclc) < 0)
+					goto err;
+			}
+		}
+
+		STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x67); /* PER */
+		break;
+
+	case STV090x_UNKNOWN:
+	default:
+		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
+		STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+			goto err;
+		break;
+	}
+
+	f_1 = STV090x_READ_DEMOD(state, CFR2);
+	f_0 = STV090x_READ_DEMOD(state, CFR1);
+	reg = STV090x_READ_DEMOD(state, TMGOBS);
+	rolloff = STV090x_GETFIELD_Px(reg, ROLLOFF_STATUS_FIELD);
+
+	if (state->algo == STV090x_BLIND_SEARCH) {
+		STV090x_WRITE_DEMOD(state, SFRSTEP, 0x00);
+		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
+		STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0x00);
+		STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0x00);
+		if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0)
+			goto err;
+
+		if (stv090x_set_srate(state, srate) < 0)
+			goto err;
+		blind_tune = 1;
+	}
+
+	if (state->dev_ver >= 0x20) {
+		if ((state->search_mode == STV090x_SEARCH_DVBS1)	||
+		    (state->search_mode == STV090x_SEARCH_DSS)		||
+		    (state->search_mode == STV090x_SEARCH_AUTO)) {
+
+			if (STV090x_WRITE_DEMOD(state, VAVSRVIT, 0x0a) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x00) < 0)
+				goto err;
+		}
+	}
+
+	if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
+		goto err;
+
+	/* AUTO tracking MODE */
+	if (STV090x_WRITE_DEMOD(state, SFRUP1, 0x80) < 0)
+		goto err;
+	/* AUTO tracking MODE */
+	if (STV090x_WRITE_DEMOD(state, SFRLOW1, 0x80) < 0)
+		goto err;
+
+	if ((state->dev_ver >= 0x20) || (blind_tune == 1) || (state->srate < 10000000)) {
+		/* update initial carrier freq with the found freq offset */
+		if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0)
+			goto err;
+		state->tuner_bw = stv090x_car_width(srate, state->rolloff) + 10000000;
+
+		if ((state->dev_ver >= 0x20) || (blind_tune == 1)) {
+
+			if (state->algo != STV090x_WARM_SEARCH) {
+
+				if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+					goto err;
+
+				if (state->config->tuner_set_bandwidth) {
+					if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
+						goto err;
+				}
+
+				if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+					goto err;
+
+			}
+		}
+		if ((state->algo == STV090x_BLIND_SEARCH) || (state->srate < 10000000))
+			msleep(50); /* blind search: wait 50ms for SR stabilization */
+		else
+			msleep(5);
+
+		stv090x_get_lock_tmg(state);
+
+		if (!(stv090x_get_dmdlock(state, (state->DemodTimeout / 2)))) {
+			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0)
+				goto err;
+
+			i = 0;
+
+			while ((!(stv090x_get_dmdlock(state, (state->DemodTimeout / 2)))) && (i <= 2)) {
+
+				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, CFRINIT1, f_1) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, CFRINIT0, f_0) < 0)
+					goto err;
+				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x18) < 0)
+					goto err;
+				i++;
+			}
+		}
+
+	}
+
+	if (state->dev_ver >= 0x20) {
+		if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x49) < 0)
+			goto err;
+	}
+
+	if ((state->delsys == STV090x_DVBS1) || (state->delsys == STV090x_DSS))
+		stv090x_set_vit_thtracq(state);
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_get_feclock(struct stv090x_state *state, s32 timeout)
+{
+	s32 timer = 0, lock = 0, stat;
+	u32 reg;
+
+	while ((timer < timeout) && (!lock)) {
+		reg = STV090x_READ_DEMOD(state, DMDSTATE);
+		stat = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD);
+
+		switch (stat) {
+		case 0: /* searching */
+		case 1: /* first PLH detected */
+		default:
+			lock = 0;
+			break;
+
+		case 2: /* DVB-S2 mode */
+			reg = STV090x_READ_DEMOD(state, PDELSTATUS1);
+			lock = STV090x_GETFIELD_Px(reg, PKTDELIN_LOCK_FIELD);
+			break;
+
+		case 3: /* DVB-S1/legacy mode */
+			reg = STV090x_READ_DEMOD(state, VSTATUSVIT);
+			lock = STV090x_GETFIELD_Px(reg, LOCKEDVIT_FIELD);
+			break;
+		}
+		if (!lock) {
+			msleep(10);
+			timer += 10;
+		}
+	}
+	return lock;
+}
+
+static int stv090x_get_lock(struct stv090x_state *state, s32 timeout_dmd, s32 timeout_fec)
+{
+	u32 reg;
+	s32 timer = 0;
+	int lock;
+
+	lock = stv090x_get_dmdlock(state, timeout_dmd);
+	if (lock)
+		lock = stv090x_get_feclock(state, timeout_fec);
+
+	if (lock) {
+		lock = 0;
+
+		while ((timer < timeout_fec) && (!lock)) {
+			reg = STV090x_READ_DEMOD(state, TSSTATUS);
+			lock = STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD);
+			msleep(1);
+			timer++;
+		}
+	}
+
+	return lock;
+}
+
+static int stv090x_set_s2rolloff(struct stv090x_state *state)
+{
+	u32 reg;
+
+	if (state->dev_ver <= 0x20) {
+		/* rolloff to auto mode if DVBS2 */
+		reg = STV090x_READ_DEMOD(state, DEMOD);
+		STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 0x00);
+		if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
+			goto err;
+	} else {
+		/* DVB-S2 rolloff to auto mode if DVBS2 */
+		reg = STV090x_READ_DEMOD(state, DEMOD);
+		STV090x_SETFIELD_Px(reg, MANUAL_S2ROLLOFF_FIELD, 0x00);
+		if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
+			goto err;
+	}
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+
+static enum stv090x_signal_state stv090x_algo(struct stv090x_state *state)
+{
+	struct dvb_frontend *fe = &state->frontend;
+	enum stv090x_signal_state signal_state = STV090x_NOCARRIER;
+	u32 reg;
+	s32 timeout_dmd = 500, timeout_fec = 50, agc1_power, power_iq = 0, i;
+	int lock = 0, low_sr = 0, no_signal = 0;
+
+	reg = STV090x_READ_DEMOD(state, TSCFGH);
+	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 1); /* Stop path 1 stream merger */
+	if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0)
+		goto err;
+
+	if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Demod stop */
+		goto err;
+
+	if (state->dev_ver >= 0x20) {
+		if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0) /* cut 2.0 */
+			goto err;
+	}
+
+	stv090x_get_lock_tmg(state);
+
+	if (state->algo == STV090x_BLIND_SEARCH) {
+		state->tuner_bw = 2 * 36000000; /* wide bw for unknown srate */
+		if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc0) < 0) /* wider srate scan */
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0)
+			goto err;
+		if (stv090x_set_srate(state, 1000000) < 0) /* inital srate = 1Msps */
+			goto err;
+	} else {
+		/* known srate */
+		if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x20) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, TMGCFG, 0xd2) < 0)
+			goto err;
+
+		if (state->srate < 2000000) {
+			/* SR < 2MSPS */
+			if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x63) < 0)
+				goto err;
+		} else {
+			/* SR >= 2Msps */
+			if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0)
+				goto err;
+		}
+
+		if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
+			goto err;
+
+		if (state->dev_ver >= 0x20) {
+			if (STV090x_WRITE_DEMOD(state, KREFTMG, 0x5a) < 0)
+				goto err;
+			if (state->algo == STV090x_COLD_SEARCH)
+				state->tuner_bw = (15 * (stv090x_car_width(state->srate, state->rolloff) + 10000000)) / 10;
+			else if (state->algo == STV090x_WARM_SEARCH)
+				state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + 10000000;
+		}
+
+		/* if cold start or warm  (Symbolrate is known)
+		 * use a Narrow symbol rate scan range
+		 */
+		if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0) /* narrow srate scan */
+			goto err;
+
+		if (stv090x_set_srate(state, state->srate) < 0)
+			goto err;
+
+		if (stv090x_set_max_srate(state, state->mclk, state->srate) < 0)
+			goto err;
+		if (stv090x_set_min_srate(state, state->mclk, state->srate) < 0)
+			goto err;
+
+		if (state->srate >= 10000000)
+			low_sr = 0;
+		else
+			low_sr = 1;
+	}
+
+	/* Setup tuner */
+	if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+		goto err;
+
+	if (state->config->tuner_set_bbgain) {
+		if (state->config->tuner_set_bbgain(fe, 10) < 0) /* 10dB */
+			goto err;
+	}
+
+	if (state->config->tuner_set_frequency) {
+		if (state->config->tuner_set_frequency(fe, state->frequency) < 0)
+			goto err;
+	}
+
+	if (state->config->tuner_set_bandwidth) {
+		if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
+			goto err;
+	}
+
+	if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+		goto err;
+
+	msleep(50);
+
+	if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+		goto err;
+
+	if (state->config->tuner_get_status) {
+		if (state->config->tuner_get_status(fe, &reg) < 0)
+			goto err;
+	}
+
+	if (reg)
+		dprintk(FE_DEBUG, 1, "Tuner phase locked");
+	else
+		dprintk(FE_DEBUG, 1, "Tuner unlocked");
+
+	if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+		goto err;
+
+	msleep(10);
+	agc1_power = MAKEWORD16(STV090x_READ_DEMOD(state, AGCIQIN1),
+				STV090x_READ_DEMOD(state, AGCIQIN0));
+
+	if (agc1_power == 0) {
+		/* If AGC1 integrator value is 0
+		 * then read POWERI, POWERQ
+		 */
+		for (i = 0; i < 5; i++) {
+			power_iq += (STV090x_READ_DEMOD(state, POWERI) +
+				     STV090x_READ_DEMOD(state, POWERQ)) >> 1;
+		}
+		power_iq /= 5;
+	}
+
+	if ((agc1_power == 0) && (power_iq < STV090x_IQPOWER_THRESHOLD)) {
+		dprintk(FE_ERROR, 1, "No Signal: POWER_IQ=0x%02x", power_iq);
+		lock = 0;
+
+	} else {
+		reg = STV090x_READ_DEMOD(state, DEMOD);
+		STV090x_SETFIELD_Px(reg, SPECINV_CONTROL_FIELD, state->inversion);
+
+		if (state->dev_ver <= 0x20) {
+			/* rolloff to auto mode if DVBS2 */
+			STV090x_SETFIELD_Px(reg, MANUAL_SXROLLOFF_FIELD, 1);
+		} else {
+			/* DVB-S2 rolloff to auto mode if DVBS2 */
+			STV090x_SETFIELD_Px(reg, MANUAL_S2ROLLOFF_FIELD, 1);
+		}
+		if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
+			goto err;
+
+		if (stv090x_delivery_search(state) < 0)
+			goto err;
+
+		if (state->algo != STV090x_BLIND_SEARCH) {
+			if (stv090x_start_search(state) < 0)
+				goto err;
+		}
+	}
+
+	/* need to check for AGC1 state */
+
+
+
+	if (state->algo == STV090x_BLIND_SEARCH)
+		lock = stv090x_blind_search(state);
+
+	else if (state->algo == STV090x_COLD_SEARCH)
+		lock = stv090x_get_coldlock(state, timeout_dmd);
+
+	else if (state->algo == STV090x_WARM_SEARCH)
+		lock = stv090x_get_dmdlock(state, timeout_dmd);
+
+	if ((!lock) && (state->algo == STV090x_COLD_SEARCH)) {
+		if (!low_sr) {
+			if (stv090x_chk_tmg(state))
+				lock = stv090x_sw_algo(state);
+		}
+	}
+
+	if (lock)
+		signal_state = stv090x_get_sig_params(state);
+
+	if ((lock) && (signal_state == STV090x_RANGEOK)) { /* signal within Range */
+		stv090x_optimize_track(state);
+
+		if (state->dev_ver >= 0x20) {
+			/* >= Cut 2.0 :release TS reset after
+			 * demod lock and optimized Tracking
+			 */
+			reg = STV090x_READ_DEMOD(state, TSCFGH);
+			STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0); /* release merger reset */
+			if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0)
+				goto err;
+
+			msleep(3);
+
+			STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 1); /* merger reset */
+			if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0)
+				goto err;
+
+			STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0); /* release merger reset */
+			if (STV090x_WRITE_DEMOD(state, TSCFGH, reg) < 0)
+				goto err;
+		}
+
+		if (stv090x_get_lock(state, timeout_fec, timeout_fec)) {
+			lock = 1;
+			if (state->delsys == STV090x_DVBS2) {
+				stv090x_set_s2rolloff(state);
+
+				reg = STV090x_READ_DEMOD(state, PDELCTRL2);
+				STV090x_SETFIELD_Px(reg, RESET_UPKO_COUNT, 1);
+				if (STV090x_WRITE_DEMOD(state, PDELCTRL2, reg) < 0)
+					goto err;
+				/* Reset DVBS2 packet delinator error counter */
+				reg = STV090x_READ_DEMOD(state, PDELCTRL2);
+				STV090x_SETFIELD_Px(reg, RESET_UPKO_COUNT, 0);
+				if (STV090x_WRITE_DEMOD(state, PDELCTRL2, reg) < 0)
+					goto err;
+
+				if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x67) < 0) /* PER */
+					goto err;
+			} else {
+				if (STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x75) < 0)
+					goto err;
+			}
+			/* Reset the Total packet counter */
+			if (STV090x_WRITE_DEMOD(state, FBERCPT4, 0x00) < 0)
+				goto err;
+			/* Reset the packet Error counter2 */
+			if (STV090x_WRITE_DEMOD(state, ERRCTRL2, 0xc1) < 0)
+				goto err;
+		} else {
+			lock = 0;
+			signal_state = STV090x_NODATA;
+			no_signal = stv090x_chk_signal(state);
+		}
+	}
+	return signal_state;
+
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static enum dvbfe_search stv090x_search(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *props = &fe->dtv_property_cache;
+
+	state->delsys = props->delivery_system;
+	state->frequency = p->frequency;
+	state->srate = p->u.qpsk.symbol_rate;
+	state->search_mode = STV090x_SEARCH_AUTO;
+	state->algo = STV090x_COLD_SEARCH;
+	state->fec = STV090x_PRERR;
+	state->search_range = 2000000;
+
+	if (stv090x_algo(state) == STV090x_RANGEOK) {
+		dprintk(FE_DEBUG, 1, "Search success!");
+		return DVBFE_ALGO_SEARCH_SUCCESS;
+	} else {
+		dprintk(FE_DEBUG, 1, "Search failed!");
+		return DVBFE_ALGO_SEARCH_FAILED;
+	}
+
+	return DVBFE_ALGO_SEARCH_ERROR;
+}
+
+/* FIXME! */
+static int stv090x_read_status(struct dvb_frontend *fe, enum fe_status *status)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg;
+	u8 search_state;
+
+	reg = STV090x_READ_DEMOD(state, DMDSTATE);
+	search_state = STV090x_GETFIELD_Px(reg, HEADER_MODE_FIELD);
+
+	switch (search_state) {
+	case 0: /* searching */
+	case 1: /* first PLH detected */
+	default:
+		dprintk(FE_DEBUG, 1, "Status: Unlocked (Searching ..)");
+		*status = 0;
+		break;
+
+	case 2: /* DVB-S2 mode */
+		dprintk(FE_DEBUG, 1, "Delivery system: DVB-S2");
+		reg = STV090x_READ_DEMOD(state, DSTATUS);
+		if (STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD)) {
+			reg = STV090x_READ_DEMOD(state, TSSTATUS);
+			if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) {
+				*status = FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+			}
+		}
+		break;
+
+	case 3: /* DVB-S1/legacy mode */
+		dprintk(FE_DEBUG, 1, "Delivery system: DVB-S");
+		reg = STV090x_READ_DEMOD(state, DSTATUS);
+		if (STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD)) {
+			reg = STV090x_READ_DEMOD(state, VSTATUSVIT);
+			if (STV090x_GETFIELD_Px(reg, LOCKEDVIT_FIELD)) {
+				reg = STV090x_READ_DEMOD(state, TSSTATUS);
+				if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) {
+					*status = FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+				}
+			}
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static int stv090x_read_per(struct dvb_frontend *fe, u32 *per)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+
+	s32 count_4, count_3, count_2, count_1, count_0, count;
+	u32 reg, h, m, l;
+	enum fe_status status;
+
+	stv090x_read_status(fe, &status);
+	if (!(status & FE_HAS_LOCK)) {
+		*per = 1 << 23; /* Max PER */
+	} else {
+		/* Counter 2 */
+		reg = STV090x_READ_DEMOD(state, ERRCNT22);
+		h = STV090x_GETFIELD_Px(reg, ERR_CNT2_FIELD);
+
+		reg = STV090x_READ_DEMOD(state, ERRCNT21);
+		m = STV090x_GETFIELD_Px(reg, ERR_CNT21_FIELD);
+
+		reg = STV090x_READ_DEMOD(state, ERRCNT20);
+		l = STV090x_GETFIELD_Px(reg, ERR_CNT20_FIELD);
+
+		*per = ((h << 16) | (m << 8) | l);
+
+		count_4 = STV090x_READ_DEMOD(state, FBERCPT4);
+		count_3 = STV090x_READ_DEMOD(state, FBERCPT3);
+		count_2 = STV090x_READ_DEMOD(state, FBERCPT2);
+		count_1 = STV090x_READ_DEMOD(state, FBERCPT1);
+		count_0 = STV090x_READ_DEMOD(state, FBERCPT0);
+
+		if ((!count_4) && (!count_3)) {
+			count  = (count_2 & 0xff) << 16;
+			count |= (count_1 & 0xff) <<  8;
+			count |=  count_0 & 0xff;
+		} else {
+			count = 1 << 24;
+		}
+		if (count == 0)
+			*per = 1;
+	}
+	if (STV090x_WRITE_DEMOD(state, FBERCPT4, 0) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, ERRCTRL2, 0xc1) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_table_lookup(const struct stv090x_tab *tab, int max, int val)
+{
+	int res = 0;
+	int min = 0, med;
+
+	if (val < tab[min].read)
+		res = tab[min].real;
+	else if (val >= tab[max].read)
+		res = tab[max].real;
+	else {
+		while ((max - min) > 1) {
+			med = (max + min) / 2;
+			if (val >= tab[min].read && val < tab[med].read)
+				max = med;
+			else
+				min = med;
+		}
+		res = ((val - tab[min].read) *
+		       (tab[max].real - tab[min].real) /
+		       (tab[max].read - tab[min].read)) +
+			tab[min].real;
+	}
+
+	return res;
+}
+
+static int stv090x_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg;
+	s32 agc;
+
+	reg = STV090x_READ_DEMOD(state, AGCIQIN1);
+	agc = STV090x_GETFIELD_Px(reg, AGCIQ_VALUE_FIELD);
+
+	*strength = stv090x_table_lookup(stv090x_rf_tab, ARRAY_SIZE(stv090x_rf_tab) - 1, agc);
+	if (agc > stv090x_rf_tab[0].read)
+		*strength = 5;
+	else if (agc < stv090x_rf_tab[ARRAY_SIZE(stv090x_rf_tab) - 1].read)
+		*strength = -100;
+
+	return 0;
+}
+
+static int stv090x_read_cnr(struct dvb_frontend *fe, u16 *cnr)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg_0, reg_1, reg, i;
+	s32 val_0, val_1, val = 0;
+	u8 lock_f;
+
+	switch (state->delsys) {
+	case STV090x_DVBS2:
+		reg = STV090x_READ_DEMOD(state, DSTATUS);
+		lock_f = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD);
+		if (lock_f) {
+			msleep(5);
+			for (i = 0; i < 16; i++) {
+				reg_1 = STV090x_READ_DEMOD(state, NNOSPLHT1);
+				val_1 = STV090x_GETFIELD_Px(reg_1, NOSPLHT_NORMED_FIELD);
+				reg_0 = STV090x_READ_DEMOD(state, NNOSPLHT0);
+				val_0 = STV090x_GETFIELD_Px(reg_1, NOSPLHT_NORMED_FIELD);
+				val  += MAKEWORD16(val_1, val_0);
+				msleep(1);
+			}
+			val /= 16;
+			*cnr = stv090x_table_lookup(stv090x_s2cn_tab, ARRAY_SIZE(stv090x_s2cn_tab) - 1, val);
+			if (val < stv090x_s2cn_tab[ARRAY_SIZE(stv090x_s2cn_tab) - 1].read)
+				*cnr = 1000;
+		}
+		break;
+
+	case STV090x_DVBS1:
+	case STV090x_DSS:
+		reg = STV090x_READ_DEMOD(state, DSTATUS);
+		lock_f = STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD);
+		if (lock_f) {
+			msleep(5);
+			for (i = 0; i < 16; i++) {
+				reg_1 = STV090x_READ_DEMOD(state, NOSDATAT1);
+				val_1 = STV090x_GETFIELD_Px(reg_1, NOSDATAT_UNNORMED_FIELD);
+				reg_0 = STV090x_READ_DEMOD(state, NOSDATAT0);
+				val_0 = STV090x_GETFIELD_Px(reg_1, NOSDATAT_UNNORMED_FIELD);
+				val  += MAKEWORD16(val_1, val_0);
+				msleep(1);
+			}
+			val /= 16;
+			*cnr = stv090x_table_lookup(stv090x_s1cn_tab, ARRAY_SIZE(stv090x_s1cn_tab) - 1, val);
+			if (val < stv090x_s2cn_tab[ARRAY_SIZE(stv090x_s1cn_tab) - 1].read)
+				*cnr = 1000;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int stv090x_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg;
+
+	reg = STV090x_READ_DEMOD(state, DISTXCTL);
+	switch (tone) {
+	case SEC_TONE_ON:
+		STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, 0);
+		STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1);
+		if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+			goto err;
+		STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0);
+		if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+			goto err;
+		break;
+
+	case SEC_TONE_OFF:
+		STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, 0);
+		STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1);
+		if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+			goto err;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+
+static enum dvbfe_algo stv090x_frontend_algo(struct dvb_frontend *fe)
+{
+	return DVBFE_ALGO_CUSTOM;
+}
+
+static int stv090x_send_diseqc_msg(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg, idle = 0, fifo_full = 1;
+	int i;
+
+	reg = STV090x_READ_DEMOD(state, DISTXCTL);
+
+	STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, 2);
+	STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1);
+	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+		goto err;
+	STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0);
+	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+		goto err;
+
+	STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 1);
+	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+		goto err;
+
+	for (i = 0; i < cmd->msg_len; i++) {
+
+		while (fifo_full) {
+			reg = STV090x_READ_DEMOD(state, DISTXSTATUS);
+			fifo_full = STV090x_GETFIELD_Px(reg, FIFO_FULL_FIELD);
+		}
+
+		if (STV090x_WRITE_DEMOD(state, DISTXDATA, cmd->msg[i]) < 0)
+			goto err;
+	}
+	reg = STV090x_READ_DEMOD(state, DISTXCTL);
+	STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 0);
+	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+		goto err;
+
+	i = 0;
+
+	while ((!idle) && (i < 10)) {
+		reg = STV090x_READ_DEMOD(state, DISTXSTATUS);
+		idle = STV090x_GETFIELD_Px(reg, TX_IDLE_FIELD);
+		msleep(10);
+		i++;
+	}
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg, idle = 0, fifo_full = 1;
+	u8 mode, value;
+	int i;
+
+	reg = STV090x_READ_DEMOD(state, DISTXCTL);
+
+	if (burst == SEC_MINI_A) {
+		mode = 3;
+		value = 0x00;
+	} else {
+		mode = 2;
+		value = 0xFF;
+	}
+
+	STV090x_SETFIELD_Px(reg, DISTX_MODE_FIELD, mode);
+	STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 1);
+	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+		goto err;
+	STV090x_SETFIELD_Px(reg, DISEQC_RESET_FIELD, 0);
+	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+		goto err;
+
+	STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 1);
+	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+		goto err;
+
+	while (fifo_full) {
+		reg = STV090x_READ_DEMOD(state, DISTXSTATUS);
+		fifo_full = STV090x_GETFIELD_Px(reg, FIFO_FULL_FIELD);
+	}
+
+	if (STV090x_WRITE_DEMOD(state, DISTXDATA, value) < 0)
+		goto err;
+
+	reg = STV090x_READ_DEMOD(state, DISTXCTL);
+	STV090x_SETFIELD_Px(reg, DIS_PRECHARGE_FIELD, 0);
+	if (STV090x_WRITE_DEMOD(state, DISTXCTL, reg) < 0)
+		goto err;
+
+	i = 0;
+
+	while ((!idle) && (i < 10)) {
+		reg = STV090x_READ_DEMOD(state, DISTXSTATUS);
+		idle = STV090x_GETFIELD_Px(reg, TX_IDLE_FIELD);
+		msleep(10);
+		i++;
+	}
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_recv_slave_reply(struct dvb_frontend *fe, struct dvb_diseqc_slave_reply *reply)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg = 0, i = 0, rx_end = 0;
+
+	while ((rx_end != 1) && (i < 10)) {
+		msleep(10);
+		i++;
+		reg = STV090x_READ_DEMOD(state, DISRX_ST0);
+		rx_end = STV090x_GETFIELD_Px(reg, RX_END_FIELD);
+	}
+
+	if (rx_end) {
+		reply->msg_len = STV090x_GETFIELD_Px(reg, FIFO_BYTENBR_FIELD);
+		for (i = 0; i < reply->msg_len; i++)
+			reply->msg[i] = STV090x_READ_DEMOD(state, DISRXDATA);
+	}
+
+	return 0;
+}
+
+static int stv090x_sleep(struct dvb_frontend *fe)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg;
+
+	dprintk(FE_DEBUG, 1, "Set %s to sleep",
+		state->device == STV0900 ? "STV0900" : "STV0903");
+
+	reg = stv090x_read_reg(state, STV090x_SYNTCTRL);
+	STV090x_SETFIELD(reg, STANDBY_FIELD, 0x01);
+	if (stv090x_write_reg(state, STV090x_SYNTCTRL, reg) < 0)
+		goto err;
+
+	reg = stv090x_read_reg(state, STV090x_TSTTNR1);
+	STV090x_SETFIELD(reg, ADC1_PON_FIELD, 0);
+	if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_wakeup(struct dvb_frontend *fe)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	u32 reg;
+
+	dprintk(FE_DEBUG, 1, "Wake %s from standby",
+		state->device == STV0900 ? "STV0900" : "STV0903");
+
+	reg = stv090x_read_reg(state, STV090x_SYNTCTRL);
+	STV090x_SETFIELD(reg, STANDBY_FIELD, 0x00);
+	if (stv090x_write_reg(state, STV090x_SYNTCTRL, reg) < 0)
+		goto err;
+
+	reg = stv090x_read_reg(state, STV090x_TSTTNR1);
+	STV090x_SETFIELD(reg, ADC1_PON_FIELD, 1);
+	if (stv090x_write_reg(state, STV090x_TSTTNR1, reg) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static void stv090x_release(struct dvb_frontend *fe)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+
+	kfree(state);
+}
+
+static int stv090x_ldpc_mode(struct stv090x_state *state, enum stv090x_mode ldpc_mode)
+{
+	u32 reg = 0;
+
+	switch (ldpc_mode) {
+	case STV090x_DUAL:
+	default:
+		if ((state->demod_mode != STV090x_DUAL) || (STV090x_GETFIELD(reg, DDEMOD_FIELD) != 1)) {
+			/* set LDPC to dual mode */
+			if (stv090x_write_reg(state, STV090x_GENCFG, 0x1d) < 0)
+				goto err;
+
+			state->demod_mode = STV090x_DUAL;
+
+			reg = stv090x_read_reg(state, STV090x_TSTRES0);
+			STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x1);
+			if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0)
+				goto err;
+			STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x0);
+			if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0)
+				goto err;
+
+			if (STV090x_WRITE_DEMOD(state, MODCODLST0, 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLST1, 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLST2, 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLST3, 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLST4, 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLST5, 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLST6, 0xff) < 0)
+				goto err;
+
+			if (STV090x_WRITE_DEMOD(state, MODCODLST7, 0xcc) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLST8, 0xcc) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLST9, 0xcc) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLSTA, 0xcc) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLSTB, 0xcc) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLSTC, 0xcc) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLSTD, 0xcc) < 0)
+				goto err;
+
+			if (STV090x_WRITE_DEMOD(state, MODCODLSTE, 0xff) < 0)
+				goto err;
+			if (STV090x_WRITE_DEMOD(state, MODCODLSTF, 0xcf) < 0)
+				goto err;
+		}
+		break;
+
+	case STV090x_SINGLE:
+		if (stv090x_stop_modcod(state) < 0)
+			goto err;
+		if (stv090x_activate_modcod_single(state) < 0)
+			goto err;
+
+		if (state->demod == STV090x_DEMODULATOR_1) {
+			if (stv090x_write_reg(state, STV090x_GENCFG, 0x06) < 0) /* path 2 */
+				goto err;
+		} else {
+			if (stv090x_write_reg(state, STV090x_GENCFG, 0x04) < 0) /* path 1 */
+				goto err;
+		}
+
+		reg = stv090x_read_reg(state, STV090x_TSTRES0);
+		STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x1);
+		if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0)
+			goto err;
+		STV090x_SETFIELD(reg, FRESFEC_FIELD, 0x0);
+		if (stv090x_write_reg(state, STV090x_TSTRES0, reg) < 0)
+			goto err;
+
+		reg = STV090x_READ_DEMOD(state, PDELCTRL1);
+		STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x01);
+		if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
+			goto err;
+		STV090x_SETFIELD_Px(reg, ALGOSWRST_FIELD, 0x00);
+		if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
+			goto err;
+		break;
+	}
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+/* return (Hz), clk in Hz*/
+static u32 stv090x_get_mclk(struct stv090x_state *state)
+{
+	const struct stv090x_config *config = state->config;
+	u32 div, reg;
+	u8 ratio;
+
+	div = stv090x_read_reg(state, STV090x_NCOARSE);
+	reg = stv090x_read_reg(state, STV090x_SYNTCTRL);
+	ratio = STV090x_GETFIELD(reg, SELX1RATIO_FIELD) ? 4 : 6;
+
+	return (div + 1) * config->xtal / ratio; /* kHz */
+}
+
+static int stv090x_set_mclk(struct stv090x_state *state, u32 mclk, u32 clk)
+{
+	const struct stv090x_config *config = state->config;
+	u32 reg, div, clk_sel;
+
+	reg = stv090x_read_reg(state, STV090x_SYNTCTRL);
+	clk_sel = ((STV090x_GETFIELD(reg, SELX1RATIO_FIELD) == 1) ? 4 : 6);
+
+	div = ((clk_sel * mclk) / config->xtal) - 1;
+
+	reg = stv090x_read_reg(state, STV090x_NCOARSE);
+	STV090x_SETFIELD(reg, M_DIV_FIELD, div);
+	if (stv090x_write_reg(state, STV090x_NCOARSE, reg) < 0)
+		goto err;
+
+	state->mclk = stv090x_get_mclk(state);
+
+	/*Set the DiseqC frequency to 22KHz */
+	div = state->mclk / 704000;
+	if (STV090x_WRITE_DEMOD(state, F22TX, div) < 0)
+		goto err;
+	if (STV090x_WRITE_DEMOD(state, F22RX, div) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_set_tspath(struct stv090x_state *state)
+{
+	u32 reg;
+
+	if (state->dev_ver >= 0x20) {
+		switch (state->config->ts1_mode) {
+		case STV090x_TSMODE_PARALLEL_PUNCTURED:
+		case STV090x_TSMODE_DVBCI:
+			switch (state->config->ts2_mode) {
+			case STV090x_TSMODE_SERIAL_PUNCTURED:
+			case STV090x_TSMODE_SERIAL_CONTINUOUS:
+			default:
+				stv090x_write_reg(state, STV090x_TSGENERAL, 0x00);
+				break;
+
+			case STV090x_TSMODE_PARALLEL_PUNCTURED:
+			case STV090x_TSMODE_DVBCI:
+				if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x06) < 0) /* Mux'd stream mode */
+					goto err;
+				reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
+				STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
+				if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
+					goto err;
+				reg = stv090x_read_reg(state, STV090x_P2_TSCFGM);
+				STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
+				if (stv090x_write_reg(state, STV090x_P2_TSCFGM, reg) < 0)
+					goto err;
+				if (stv090x_write_reg(state, STV090x_P1_TSSPEED, 0x14) < 0)
+					goto err;
+				if (stv090x_write_reg(state, STV090x_P2_TSSPEED, 0x28) < 0)
+					goto err;
+				break;
+			}
+			break;
+
+		case STV090x_TSMODE_SERIAL_PUNCTURED:
+		case STV090x_TSMODE_SERIAL_CONTINUOUS:
+		default:
+			switch (state->config->ts2_mode) {
+			case STV090x_TSMODE_SERIAL_PUNCTURED:
+			case STV090x_TSMODE_SERIAL_CONTINUOUS:
+			default:
+				if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c) < 0)
+					goto err;
+				break;
+
+			case STV090x_TSMODE_PARALLEL_PUNCTURED:
+			case STV090x_TSMODE_DVBCI:
+				if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0a) < 0)
+					goto err;
+				break;
+			}
+			break;
+		}
+	} else {
+		switch (state->config->ts1_mode) {
+		case STV090x_TSMODE_PARALLEL_PUNCTURED:
+		case STV090x_TSMODE_DVBCI:
+			switch (state->config->ts2_mode) {
+			case STV090x_TSMODE_SERIAL_PUNCTURED:
+			case STV090x_TSMODE_SERIAL_CONTINUOUS:
+			default:
+				stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x10);
+				break;
+
+			case STV090x_TSMODE_PARALLEL_PUNCTURED:
+			case STV090x_TSMODE_DVBCI:
+				stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x16);
+				reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
+				STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
+				if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
+					goto err;
+				reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
+				STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 0);
+				if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
+					goto err;
+				if (stv090x_write_reg(state, STV090x_P1_TSSPEED, 0x14) < 0)
+					goto err;
+				if (stv090x_write_reg(state, STV090x_P2_TSSPEED, 0x28) < 0)
+					goto err;
+				break;
+			}
+			break;
+
+		case STV090x_TSMODE_SERIAL_PUNCTURED:
+		case STV090x_TSMODE_SERIAL_CONTINUOUS:
+		default:
+			switch (state->config->ts2_mode) {
+			case STV090x_TSMODE_SERIAL_PUNCTURED:
+			case STV090x_TSMODE_SERIAL_CONTINUOUS:
+			default:
+				stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x14);
+				break;
+
+			case STV090x_TSMODE_PARALLEL_PUNCTURED:
+			case STV090x_TSMODE_DVBCI:
+				stv090x_write_reg(state, STV090x_TSGENERAL1X, 0x12);
+				break;
+			}
+			break;
+		}
+	}
+
+	switch (state->config->ts1_mode) {
+	case STV090x_TSMODE_PARALLEL_PUNCTURED:
+		reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
+		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00);
+		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00);
+		if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
+			goto err;
+		break;
+
+	case STV090x_TSMODE_DVBCI:
+		reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
+		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00);
+		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01);
+		if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
+			goto err;
+		break;
+
+	case STV090x_TSMODE_SERIAL_PUNCTURED:
+		reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
+		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01);
+		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00);
+		if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
+			goto err;
+		break;
+
+	case STV090x_TSMODE_SERIAL_CONTINUOUS:
+		reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
+		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01);
+		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01);
+		if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
+			goto err;
+		break;
+
+	default:
+		break;
+	}
+
+	switch (state->config->ts2_mode) {
+	case STV090x_TSMODE_PARALLEL_PUNCTURED:
+		reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
+		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00);
+		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00);
+		if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
+			goto err;
+		break;
+
+	case STV090x_TSMODE_DVBCI:
+		reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
+		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x00);
+		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01);
+		if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
+			goto err;
+		break;
+
+	case STV090x_TSMODE_SERIAL_PUNCTURED:
+		reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
+		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01);
+		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x00);
+		if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
+			goto err;
+		break;
+
+	case STV090x_TSMODE_SERIAL_CONTINUOUS:
+		reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
+		STV090x_SETFIELD_Px(reg, TSFIFO_SERIAL_FIELD, 0x01);
+		STV090x_SETFIELD_Px(reg, TSFIFO_DVBCI_FIELD, 0x01);
+		if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
+			goto err;
+		break;
+
+	default:
+		break;
+	}
+	reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
+	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01);
+	if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
+		goto err;
+	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x00);
+	if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
+		goto err;
+
+	reg = stv090x_read_reg(state, STV090x_P1_TSCFGH);
+	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01);
+	if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
+		goto err;
+	STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x00);
+	if (stv090x_write_reg(state, STV090x_P1_TSCFGH, reg) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_init(struct dvb_frontend *fe)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	const struct stv090x_config *config = state->config;
+	u32 reg;
+
+	if (stv090x_wakeup(fe) < 0) {
+		dprintk(FE_ERROR, 1, "Error waking device");
+		goto err;
+	}
+
+	if (stv090x_ldpc_mode(state, state->demod_mode) < 0)
+		goto err;
+
+	reg = STV090x_READ_DEMOD(state, TNRCFG2);
+	STV090x_SETFIELD_Px(reg, TUN_IQSWAP_FIELD, state->inversion);
+	if (STV090x_WRITE_DEMOD(state, TNRCFG2, reg) < 0)
+		goto err;
+	reg = STV090x_READ_DEMOD(state, DEMOD);
+	STV090x_SETFIELD_Px(reg, ROLLOFF_CONTROL_FIELD, state->rolloff);
+	if (STV090x_WRITE_DEMOD(state, DEMOD, reg) < 0)
+		goto err;
+
+	if (stv090x_i2c_gate_ctrl(fe, 1) < 0)
+		goto err;
+
+	if (config->tuner_set_mode) {
+		if (config->tuner_set_mode(fe, TUNER_WAKE) < 0)
+			goto err;
+	}
+
+	if (config->tuner_init) {
+		if (config->tuner_init(fe) < 0)
+			goto err;
+	}
+
+	if (stv090x_i2c_gate_ctrl(fe, 0) < 0)
+		goto err;
+
+	if (stv090x_set_tspath(state) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static int stv090x_setup(struct dvb_frontend *fe)
+{
+	struct stv090x_state *state = fe->demodulator_priv;
+	const struct stv090x_config *config = state->config;
+	const struct stv090x_reg *stv090x_initval = NULL;
+	const struct stv090x_reg *stv090x_cut20_val = NULL;
+	unsigned long t1_size = 0, t2_size = 0;
+	u32 reg = 0;
+
+	int i;
+
+	if (state->device == STV0900) {
+		dprintk(FE_DEBUG, 1, "Initializing STV0900");
+		stv090x_initval = stv0900_initval;
+		t1_size = ARRAY_SIZE(stv0900_initval);
+		stv090x_cut20_val = stv0900_cut20_val;
+		t2_size = ARRAY_SIZE(stv0900_cut20_val);
+	} else if (state->device == STV0903) {
+		dprintk(FE_DEBUG, 1, "Initializing STV0903");
+		stv090x_initval = stv0903_initval;
+		t1_size = ARRAY_SIZE(stv0903_initval);
+		stv090x_cut20_val = stv0903_cut20_val;
+		t2_size = ARRAY_SIZE(stv0903_cut20_val);
+	}
+
+	/* STV090x init */
+	if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Stop Demod */
+		goto err;
+
+	msleep(5);
+
+	if (STV090x_WRITE_DEMOD(state, TNRCFG, 0x6c) < 0) /* check register ! (No Tuner Mode) */
+		goto err;
+
+	STV090x_SETFIELD_Px(reg, ENARPT_LEVEL_FIELD, config->repeater_level);
+	if (STV090x_WRITE_DEMOD(state, I2CRPT, reg) < 0) /* repeater OFF */
+		goto err;
+
+	if (stv090x_write_reg(state, STV090x_NCOARSE, 0x13) < 0) /* set PLL divider */
+		goto err;
+	msleep(5);
+	if (stv090x_write_reg(state, STV090x_I2CCFG, 0x08) < 0) /* 1/41 oversampling */
+		goto err;
+	if (stv090x_write_reg(state, STV090x_SYNTCTRL, 0x20 | config->clk_mode) < 0) /* enable PLL */
+		goto err;
+	msleep(5);
+
+	/* write initval */
+	dprintk(FE_DEBUG, 1, "Setting up initial values");
+	for (i = 0; i < t1_size; i++) {
+		if (stv090x_write_reg(state, stv090x_initval[i].addr, stv090x_initval[i].data) < 0)
+			goto err;
+	}
+
+	state->dev_ver = stv090x_read_reg(state, STV090x_MID);
+	if (state->dev_ver >= 0x20) {
+		if (stv090x_write_reg(state, STV090x_TSGENERAL, 0x0c) < 0)
+			goto err;
+
+		/* write cut20_val*/
+		dprintk(FE_DEBUG, 1, "Setting up Cut 2.0 initial values");
+		for (i = 0; i < t2_size; i++) {
+			if (stv090x_write_reg(state, stv090x_cut20_val[i].addr, stv090x_cut20_val[i].data) < 0)
+				goto err;
+		}
+
+	} else if (state->dev_ver < 0x20) {
+		dprintk(FE_ERROR, 1, "ERROR: Unsupported Cut: 0x%02x!",
+			state->dev_ver);
+
+		goto err;
+	} else if (state->dev_ver > 0x30) {
+		/* we shouldn't bail out from here */
+		dprintk(FE_ERROR, 1, "INFO: Cut: 0x%02x probably incomplete support!",
+			state->dev_ver);
+	}
+
+	if (stv090x_write_reg(state, STV090x_TSTRES0, 0x80) < 0)
+		goto err;
+	if (stv090x_write_reg(state, STV090x_TSTRES0, 0x00) < 0)
+		goto err;
+
+	stv090x_set_mclk(state, 135000000, config->xtal); /* 135 Mhz */
+	msleep(5);
+	if (stv090x_write_reg(state, STV090x_SYNTCTRL, 0x20 | config->clk_mode) < 0)
+		goto err;
+	stv090x_get_mclk(state);
+
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
+static struct dvb_frontend_ops stv090x_ops = {
+
+	.info = {
+		.name			= "STV090x Multistandard",
+		.type			= FE_QPSK,
+		.frequency_min		= 950000,
+		.frequency_max 		= 2150000,
+		.frequency_stepsize	= 0,
+		.frequency_tolerance	= 0,
+		.symbol_rate_min 	= 1000000,
+		.symbol_rate_max 	= 45000000,
+		.caps			= FE_CAN_INVERSION_AUTO |
+					  FE_CAN_FEC_AUTO       |
+					  FE_CAN_QPSK           |
+					  FE_CAN_2G_MODULATION
+	},
+
+	.release			= stv090x_release,
+	.init				= stv090x_init,
+
+	.sleep				= stv090x_sleep,
+	.get_frontend_algo		= stv090x_frontend_algo,
+
+	.i2c_gate_ctrl			= stv090x_i2c_gate_ctrl,
+
+	.diseqc_send_master_cmd		= stv090x_send_diseqc_msg,
+	.diseqc_send_burst		= stv090x_send_diseqc_burst,
+	.diseqc_recv_slave_reply	= stv090x_recv_slave_reply,
+	.set_tone			= stv090x_set_tone,
+
+	.search				= stv090x_search,
+	.read_status			= stv090x_read_status,
+	.read_ber			= stv090x_read_per,
+	.read_signal_strength		= stv090x_read_signal_strength,
+	.read_snr			= stv090x_read_cnr
+};
+
+
+struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
+				    struct i2c_adapter *i2c,
+				    enum stv090x_demodulator demod)
+{
+	struct stv090x_state *state = NULL;
+
+	state = kzalloc(sizeof (struct stv090x_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	state->verbose				= &verbose;
+	state->config				= config;
+	state->i2c				= i2c;
+	state->frontend.ops			= stv090x_ops;
+	state->frontend.demodulator_priv	= state;
+	state->demod				= demod;
+	state->demod_mode 			= config->demod_mode; /* Single or Dual mode */
+	state->device				= config->device;
+	state->rolloff				= STV090x_RO_35; /* default */
+
+	if (state->demod == STV090x_DEMODULATOR_0)
+		mutex_init(&demod_lock);
+
+	if (stv090x_sleep(&state->frontend) < 0) {
+		dprintk(FE_ERROR, 1, "Error putting device to sleep");
+		goto error;
+	}
+
+	if (stv090x_setup(&state->frontend) < 0) {
+		dprintk(FE_ERROR, 1, "Error setting up device");
+		goto error;
+	}
+	if (stv090x_wakeup(&state->frontend) < 0) {
+		dprintk(FE_ERROR, 1, "Error waking device");
+		goto error;
+	}
+
+	dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x\n",
+	       state->device == STV0900 ? "STV0900" : "STV0903",
+	       demod,
+	       state->dev_ver);
+
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(stv090x_attach);
+MODULE_PARM_DESC(verbose, "Set Verbosity level");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_DESCRIPTION("STV090x Multi-Std Broadcast frontend");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stv090x.h b/drivers/media/dvb/frontends/stv090x.h
new file mode 100644
index 00000000000..e968c98bb70
--- /dev/null
+++ b/drivers/media/dvb/frontends/stv090x.h
@@ -0,0 +1,106 @@
+/*
+	STV0900/0903 Multistandard Broadcast Frontend driver
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __STV090x_H
+#define __STV090x_H
+
+enum stv090x_demodulator {
+	STV090x_DEMODULATOR_0 = 1,
+	STV090x_DEMODULATOR_1
+};
+
+enum stv090x_device {
+	STV0903	=  0,
+	STV0900,
+};
+
+enum stv090x_mode {
+	STV090x_DUAL = 0,
+	STV090x_SINGLE
+};
+
+enum stv090x_tsmode {
+	STV090x_TSMODE_SERIAL_PUNCTURED	= 1,
+	STV090x_TSMODE_SERIAL_CONTINUOUS,
+	STV090x_TSMODE_PARALLEL_PUNCTURED,
+	STV090x_TSMODE_DVBCI
+};
+
+enum stv090x_clkmode {
+	STV090x_CLK_INT = 0, /* Clk i/p = CLKI */
+	STV090x_CLK_EXT = 2 /* Clk i/p = XTALI */
+};
+
+enum stv090x_i2crpt {
+	STV090x_RPTLEVEL_256	= 0,
+	STV090x_RPTLEVEL_128	= 1,
+	STV090x_RPTLEVEL_64	= 2,
+	STV090x_RPTLEVEL_32	= 3,
+	STV090x_RPTLEVEL_16	= 4,
+	STV090x_RPTLEVEL_8	= 5,
+	STV090x_RPTLEVEL_4	= 6,
+	STV090x_RPTLEVEL_2	= 7,
+};
+
+struct stv090x_config {
+	enum stv090x_device	device;
+	enum stv090x_mode	demod_mode;
+	enum stv090x_clkmode	clk_mode;
+
+	u32 xtal; /* default: 8000000 */
+	u8 address; /* default: 0x68 */
+
+	u32 ref_clk; /* default: 16000000 FIXME to tuner config */
+
+	u8 ts1_mode;
+	u8 ts2_mode;
+
+	enum stv090x_i2crpt	repeater_level;
+
+	int (*tuner_init) (struct dvb_frontend *fe);
+	int (*tuner_set_mode) (struct dvb_frontend *fe, enum tuner_mode mode);
+	int (*tuner_set_frequency) (struct dvb_frontend *fe, u32 frequency);
+	int (*tuner_get_frequency) (struct dvb_frontend *fe, u32 *frequency);
+	int (*tuner_set_bandwidth) (struct dvb_frontend *fe, u32 bandwidth);
+	int (*tuner_get_bandwidth) (struct dvb_frontend *fe, u32 *bandwidth);
+	int (*tuner_set_bbgain) (struct dvb_frontend *fe, u32 gain);
+	int (*tuner_get_bbgain) (struct dvb_frontend *fe, u32 *gain);
+	int (*tuner_set_refclk)  (struct dvb_frontend *fe, u32 refclk);
+	int (*tuner_get_status) (struct dvb_frontend *fe, u32 *status);
+};
+
+#if defined(CONFIG_DVB_STV090x) || (defined(CONFIG_DVB_STV090x_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
+					   struct i2c_adapter *i2c,
+					   enum stv090x_demodulator demod);
+#else
+
+static inline struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
+						  struct i2c_adapter *i2c,
+						  enum stv090x_demodulator demod)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif /* CONFIG_DVB_STV090x */
+
+#endif /* __STV090x_H */
diff --git a/drivers/media/dvb/frontends/stv090x_priv.h b/drivers/media/dvb/frontends/stv090x_priv.h
new file mode 100644
index 00000000000..5a4a01740d8
--- /dev/null
+++ b/drivers/media/dvb/frontends/stv090x_priv.h
@@ -0,0 +1,269 @@
+/*
+	STV0900/0903 Multistandard Broadcast Frontend driver
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __STV090x_PRIV_H
+#define __STV090x_PRIV_H
+
+#include "dvb_frontend.h"
+
+#define FE_ERROR				0
+#define FE_NOTICE				1
+#define FE_INFO					2
+#define FE_DEBUG				3
+#define FE_DEBUGREG				4
+
+#define dprintk(__y, __z, format, arg...) do {						\
+	if (__z) {									\
+		if	((verbose > FE_ERROR) && (verbose > __y))			\
+			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
+		else if	((verbose > FE_NOTICE) && (verbose > __y))			\
+			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
+		else if ((verbose > FE_INFO) && (verbose > __y))			\
+			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
+		else if ((verbose > FE_DEBUG) && (verbose > __y))			\
+			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
+	} else {									\
+		if (verbose > __y)							\
+			printk(format, ##arg);						\
+	}										\
+} while (0)
+
+#define STV090x_READ_DEMOD(__state, __reg) ((			\
+	(__state)->demod == STV090x_DEMODULATOR_1)	?	\
+	stv090x_read_reg(__state, STV090x_P2_##__reg) :		\
+	stv090x_read_reg(__state, STV090x_P1_##__reg))
+
+#define STV090x_WRITE_DEMOD(__state, __reg, __data) ((		\
+	(__state)->demod == STV090x_DEMODULATOR_1)	?	\
+	stv090x_write_reg(__state, STV090x_P2_##__reg, __data) :\
+	stv090x_write_reg(__state, STV090x_P1_##__reg, __data))
+
+#define STV090x_ADDR_OFFST(__state, __x) ((			\
+	(__state->demod) == STV090x_DEMODULATOR_1)	?	\
+		STV090x_P1_##__x :				\
+		STV090x_P2_##__x)
+
+
+#define STV090x_SETFIELD(mask, bitf, val)	(mask = (mask & (~(((1 << STV090x_WIDTH_##bitf) - 1) <<\
+							 STV090x_OFFST_##bitf))) | \
+							 (val << STV090x_OFFST_##bitf))
+
+#define STV090x_GETFIELD(val, bitf)		((val >> STV090x_OFFST_##bitf) & ((1 << STV090x_WIDTH_##bitf) - 1))
+
+
+#define STV090x_SETFIELD_Px(mask, bitf, val)	(mask = (mask & (~(((1 << STV090x_WIDTH_Px_##bitf) - 1) <<\
+							 STV090x_OFFST_Px_##bitf))) | \
+							 (val << STV090x_OFFST_Px_##bitf))
+
+#define STV090x_GETFIELD_Px(val, bitf)		((val >> STV090x_OFFST_Px_##bitf) & ((1 << STV090x_WIDTH_Px_##bitf) - 1))
+
+#define MAKEWORD16(__a, __b)			(((__a) << 8) | (__b))
+
+#define MSB(__x)				((__x >> 8) & 0xff)
+#define LSB(__x)				(__x & 0xff)
+
+
+#define STV090x_IQPOWER_THRESHOLD	  30
+#define STV090x_SEARCH_AGC2_TH_CUT20	 700
+#define STV090x_SEARCH_AGC2_TH_CUT30	1200
+
+#define STV090x_SEARCH_AGC2_TH(__ver)	\
+	((__ver <= 0x20) ?		\
+	STV090x_SEARCH_AGC2_TH_CUT20 :	\
+	STV090x_SEARCH_AGC2_TH_CUT30)
+
+enum stv090x_signal_state {
+	STV090x_NOCARRIER,
+	STV090x_NODATA,
+	STV090x_DATAOK,
+	STV090x_RANGEOK,
+	STV090x_OUTOFRANGE
+};
+
+enum stv090x_fec {
+	STV090x_PR12 = 0,
+	STV090x_PR23,
+	STV090x_PR34,
+	STV090x_PR45,
+	STV090x_PR56,
+	STV090x_PR67,
+	STV090x_PR78,
+	STV090x_PR89,
+	STV090x_PR910,
+	STV090x_PRERR
+};
+
+enum stv090x_modulation {
+	STV090x_QPSK,
+	STV090x_8PSK,
+	STV090x_16APSK,
+	STV090x_32APSK,
+	STV090x_UNKNOWN
+};
+
+enum stv090x_frame {
+	STV090x_LONG_FRAME,
+	STV090x_SHORT_FRAME
+};
+
+enum stv090x_pilot {
+	STV090x_PILOTS_OFF,
+	STV090x_PILOTS_ON
+};
+
+enum stv090x_rolloff {
+	STV090x_RO_35,
+	STV090x_RO_25,
+	STV090x_RO_20
+};
+
+enum stv090x_inversion {
+	STV090x_IQ_AUTO,
+	STV090x_IQ_NORMAL,
+	STV090x_IQ_SWAP
+};
+
+enum stv090x_modcod {
+	STV090x_DUMMY_PLF = 0,
+	STV090x_QPSK_14,
+	STV090x_QPSK_13,
+	STV090x_QPSK_25,
+	STV090x_QPSK_12,
+	STV090x_QPSK_35,
+	STV090x_QPSK_23,
+	STV090x_QPSK_34,
+	STV090x_QPSK_45,
+	STV090x_QPSK_56,
+	STV090x_QPSK_89,
+	STV090x_QPSK_910,
+	STV090x_8PSK_35,
+	STV090x_8PSK_23,
+	STV090x_8PSK_34,
+	STV090x_8PSK_56,
+	STV090x_8PSK_89,
+	STV090x_8PSK_910,
+	STV090x_16APSK_23,
+	STV090x_16APSK_34,
+	STV090x_16APSK_45,
+	STV090x_16APSK_56,
+	STV090x_16APSK_89,
+	STV090x_16APSK_910,
+	STV090x_32APSK_34,
+	STV090x_32APSK_45,
+	STV090x_32APSK_56,
+	STV090x_32APSK_89,
+	STV090x_32APSK_910,
+	STV090x_MODCODE_UNKNOWN
+};
+
+enum stv090x_search {
+	STV090x_SEARCH_DSS = 0,
+	STV090x_SEARCH_DVBS1,
+	STV090x_SEARCH_DVBS2,
+	STV090x_SEARCH_AUTO
+};
+
+enum stv090x_algo {
+	STV090x_BLIND_SEARCH,
+	STV090x_COLD_SEARCH,
+	STV090x_WARM_SEARCH
+};
+
+enum stv090x_delsys {
+	STV090x_ERROR = 0,
+	STV090x_DVBS1 = 1,
+	STV090x_DVBS2,
+	STV090x_DSS
+};
+
+struct stv090x_long_frame_crloop {
+	enum stv090x_modcod	modcod;
+
+	u8 crl_pilots_on_2;
+	u8 crl_pilots_off_2;
+	u8 crl_pilots_on_5;
+	u8 crl_pilots_off_5;
+	u8 crl_pilots_on_10;
+	u8 crl_pilots_off_10;
+	u8 crl_pilots_on_20;
+	u8 crl_pilots_off_20;
+	u8 crl_pilots_on_30;
+	u8 crl_pilots_off_30;
+};
+
+struct stv090x_short_frame_crloop {
+	enum stv090x_modulation	modulation;
+
+	u8 crl_2;  /*      SR <   3M */
+	u8 crl_5;  /*  3 < SR <=  7M */
+	u8 crl_10; /*  7 < SR <= 15M */
+	u8 crl_20; /* 10 < SR <= 25M */
+	u8 crl_30; /* 10 < SR <= 45M */
+};
+
+struct stv090x_reg {
+	u16 addr;
+	u8  data;
+};
+
+struct stv090x_tab {
+	s32 real;
+	s32 read;
+};
+
+struct stv090x_state {
+	enum stv090x_device		device;
+	enum stv090x_demodulator	demod;
+	enum stv090x_mode		demod_mode;
+	u32				dev_ver;
+
+	struct i2c_adapter		*i2c;
+	const struct stv090x_config	*config;
+	struct dvb_frontend		frontend;
+
+	u32				*verbose; /* Cached module verbosity */
+
+	enum stv090x_delsys		delsys;
+	enum stv090x_fec		fec;
+	enum stv090x_modulation		modulation;
+	enum stv090x_modcod		modcod;
+	enum stv090x_search		search_mode;
+	enum stv090x_frame		frame_len;
+	enum stv090x_pilot		pilots;
+	enum stv090x_rolloff		rolloff;
+	enum stv090x_inversion		inversion;
+	enum stv090x_algo		algo;
+
+	u32				frequency;
+	u32				srate;
+
+	s32				mclk; /* Masterclock Divider factor */
+	s32				tuner_bw;
+
+	u32				tuner_refclk;
+
+	s32				search_range;
+
+	s32				DemodTimeout;
+	s32				FecTimeout;
+};
+
+#endif /* __STV090x_PRIV_H */
diff --git a/drivers/media/dvb/frontends/stv090x_reg.h b/drivers/media/dvb/frontends/stv090x_reg.h
new file mode 100644
index 00000000000..57b6abbbd32
--- /dev/null
+++ b/drivers/media/dvb/frontends/stv090x_reg.h
@@ -0,0 +1,2373 @@
+/*
+	STV0900/0903 Multistandard Broadcast Frontend driver
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __STV090x_REG_H
+#define __STV090x_REG_H
+
+#define STV090x_MID				0xf100
+#define STV090x_OFFST_MCHIP_IDENT_FIELD		4
+#define STV090x_WIDTH_MCHIP_IDENT_FIELD		4
+#define STV090x_OFFST_MRELEASE_FIELD		0
+#define STV090x_WIDTH_MRELEASE_FIELD		4
+
+#define STV090x_DACR1				0xf113
+#define STV090x_OFFST_DACR1_MODE_FIELD		5
+#define STV090x_WIDTH_DACR1_MODE_FIELD		3
+#define STV090x_OFFST_DACR1_VALUE_FIELD		0
+#define STV090x_WIDTH_DACR1_VALUE_FIELD		4
+
+#define STV090x_DACR2				0xf114
+#define STV090x_OFFST_DACR2_VALUE_FIELD		0
+#define STV090x_WIDTH_DACR2_VALUE_FIELD		8
+
+#define STV090x_OUTCFG				0xf11c
+#define STV090x_OFFST_OUTSERRS1_HZ_FIELD	6
+#define STV090x_WIDTH_OUTSERRS1_HZ_FIELD	1
+#define STV090x_OFFST_OUTSERRS2_HZ_FIELD	5
+#define STV090x_WIDTH_OUTSERRS2_HZ_FIELD	1
+#define STV090x_OFFST_OUTSERRS3_HZ_FIELD	4
+#define STV090x_WIDTH_OUTPARRS3_HZ_FIELD	1
+#define STV090x_OFFST_OUTPARRS3_HZ_FIELD	3
+#define STV090x_WIDTH_OUTPARRS3_HZ_FIELD	1
+
+#define STV090x_MODECFG				0xf11d
+
+#define STV090x_IRQSTATUS3			0xf120
+#define STV090x_OFFST_SPLL_LOCK_FIELD		5
+#define STV090x_WIDTH_SPLL_LOCK_FIELD		1
+#define STV090x_OFFST_SSTREAM_LCK_3_FIELD	4
+#define STV090x_WIDTH_SSTREAM_LCK_3_FIELD	1
+#define STV090x_OFFST_SSTREAM_LCK_2_FIELD	3
+#define STV090x_WIDTH_SSTREAM_LCK_2_FIELD	1
+#define STV090x_OFFST_SSTREAM_LCK_1_FIELD	2
+#define STV090x_WIDTH_SSTREAM_LCK_1_FIELD	1
+#define STV090x_OFFST_SDVBS1_PRF_2_FIELD	1
+#define STV090x_WIDTH_SDVBS1_PRF_2_FIELD	1
+#define STV090x_OFFST_SDVBS1_PRF_1_FIELD	0
+#define STV090x_WIDTH_SDVBS1_PRF_1_FIELD	1
+
+#define STV090x_IRQSTATUS2			0xf121
+#define STV090x_OFFST_SSPY_ENDSIM_3_FIELD	7
+#define STV090x_WIDTH_SSPY_ENDSIM_3_FIELD	1
+#define STV090x_OFFST_SSPY_ENDSIM_2_FIELD	6
+#define STV090x_WIDTH_SSPY_ENDSIM_2_FIELD	1
+#define STV090x_OFFST_SSPY_ENDSIM_1_FIELD	5
+#define STV090x_WIDTH_SSPY_ENDSIM_1_FIELD	1
+#define STV090x_OFFST_SPKTDEL_ERROR_2_FIELD	4
+#define STV090x_WIDTH_SPKTDEL_ERROR_2_FIELD	1
+#define STV090x_OFFST_SPKTDEL_LOCKB_2_FIELD	3
+#define STV090x_WIDTH_SPKTDEL_LOCKB_2_FIELD	1
+#define STV090x_OFFST_SPKTDEL_LOCK_2_FIELD	2
+#define STV090x_WIDTH_SPKTDEL_LOCK_2_FIELD	1
+#define STV090x_OFFST_SPKTDEL_ERROR_1_FIELD	1
+#define STV090x_WIDTH_SPKTDEL_ERROR_1_FIELD	1
+#define STV090x_OFFST_SPKTDEL_LOCKB_1_FIELD	0
+#define STV090x_WIDTH_SPKTDEL_LOCKB_1_FIELD	1
+
+#define STV090x_IRQSTATUS1			0xf122
+#define STV090x_OFFST_SPKTDEL_LOCK_1_FIELD	7
+#define STV090x_WIDTH_SPKTDEL_LOCK_1_FIELD	1
+#define STV090x_OFFST_SDEMOD_LOCKB_2_FIELD	2
+#define STV090x_WIDTH_SDEMOD_LOCKB_2_FIELD	1
+#define STV090x_OFFST_SDEMOD_LOCK_2_FIELD	1
+#define STV090x_WIDTH_SDEMOD_LOCK_2_FIELD	1
+#define STV090x_OFFST_SDEMOD_IRQ_2_FIELD	0
+#define STV090x_WIDTH_SDEMOD_IRQ_2_FIELD	1
+
+#define STV090x_IRQSTATUS0			0xf123
+#define STV090x_OFFST_SDEMOD_LOCKB_1_FIELD	7
+#define STV090x_WIDTH_SDEMOD_LOCKB_1_FIELD	1
+#define STV090x_OFFST_SDEMOD_LOCK_1_FIELD	6
+#define STV090x_WIDTH_SDEMOD_LOCK_1_FIELD	1
+#define STV090x_OFFST_SDEMOD_IRQ_1_FIELD	5
+#define STV090x_WIDTH_SDEMOD_IRQ_1_FIELD	1
+#define STV090x_OFFST_SBCH_ERRFLAG_FIELD	4
+#define STV090x_WIDTH_SBCH_ERRFLAG_FIELD	1
+#define STV090x_OFFST_SDISEQC2RX_IRQ_FIELD	3
+#define STV090x_WIDTH_SDISEQC2RX_IRQ_FIELD	1
+#define STV090x_OFFST_SDISEQC2TX_IRQ_FIELD	2
+#define STV090x_WIDTH_SDISEQC2TX_IRQ_FIELD	1
+#define STV090x_OFFST_SDISEQC1RX_IRQ_FIELD	1
+#define STV090x_WIDTH_SDISEQC1RX_IRQ_FIELD	1
+#define STV090x_OFFST_SDISEQC1TX_IRQ_FIELD	0
+#define STV090x_WIDTH_SDISEQC1TX_IRQ_FIELD	1
+
+#define STV090x_IRQMASK3			0xf124
+#define STV090x_OFFST_MPLL_LOCK_FIELD		5
+#define STV090x_WIDTH_MPLL_LOCK_FIELD		1
+#define STV090x_OFFST_MSTREAM_LCK_3_FIELD	2
+#define STV090x_WIDTH_MSTREAM_LCK_3_FIELD	3
+#define STV090x_OFFST_MSTREAM_LCK_2_FIELD	2
+#define STV090x_WIDTH_MSTREAM_LCK_2_FIELD	3
+#define STV090x_OFFST_MSTREAM_LCK_1_FIELD	2
+#define STV090x_WIDTH_MSTREAM_LCK_1_FIELD	3
+#define STV090x_OFFST_MDVBS1_PRF_2_FIELD	1
+#define STV090x_WIDTH_MDVBS1_PRF_2_FIELD	1
+#define STV090x_OFFST_MDVBS1_PRF_1_FIELD	0
+#define STV090x_WIDTH_MDVBS1_PRF_1_FIELD	1
+
+#define STV090x_IRQMASK2			0xf125
+#define STV090x_OFFST_MSPY_ENDSIM_3_FIELD	5
+#define STV090x_WIDTH_MSPY_ENDSIM_3_FIELD	3
+#define STV090x_OFFST_MSPY_ENDSIM_2_FIELD	5
+#define STV090x_WIDTH_MSPY_ENDSIM_2_FIELD	3
+#define STV090x_OFFST_MSPY_ENDSIM_1_FIELD	5
+#define STV090x_WIDTH_MSPY_ENDSIM_1_FIELD	3
+#define STV090x_OFFST_MPKTDEL_ERROR_2_FIELD	4
+#define STV090x_WIDTH_MPKTDEL_ERROR_2_FIELD	1
+#define STV090x_OFFST_MPKTDEL_LOCKB_2_FIELD	3
+#define STV090x_WIDTH_MPKTDEL_LOCKB_2_FIELD	1
+#define STV090x_OFFST_MPKTDEL_LOCK_2_FIELD	2
+#define STV090x_WIDTH_MPKTDEL_LOCK_2_FIELD	1
+#define STV090x_OFFST_MPKTDEL_ERROR_1_FIELD	1
+#define STV090x_WIDTH_MPKTDEL_ERROR_1_FIELD	1
+#define STV090x_OFFST_MPKTDEL_LOCKB_1_FIELD	0
+#define STV090x_WIDTH_MPKTDEL_LOCKB_1_FIELD	1
+
+#define STV090x_IRQMASK1			0xf126
+#define STV090x_OFFST_MPKTDEL_LOCK_1_FIELD	7
+#define STV090x_WIDTH_MPKTDEL_LOCK_1_FIELD	1
+#define STV090x_OFFST_MEXTPINB2_FIELD		6
+#define STV090x_WIDTH_MEXTPINB2_FIELD		1
+#define STV090x_OFFST_MEXTPIN2_FIELD		5
+#define STV090x_WIDTH_MEXTPIN2_FIELD		1
+#define STV090x_OFFST_MEXTPINB1_FIELD		4
+#define STV090x_WIDTH_MEXTPINB1_FIELD		1
+#define STV090x_OFFST_MEXTPIN1_FIELD		3
+#define STV090x_WIDTH_MEXTPIN1_FIELD		1
+#define STV090x_OFFST_MDEMOD_LOCKB_2_FIELD	2
+#define STV090x_WIDTH_MDEMOD_LOCKB_2_FIELD	1
+#define STV090x_OFFST_MDEMOD_LOCK_2_FIELD	1
+#define STV090x_WIDTH_MDEMOD_LOCK_2_FIELD	1
+#define STV090x_OFFST_MDEMOD_IRQ_2_FIELD	0
+#define STV090x_WIDTH_MDEMOD_IRQ_2_FIELD	1
+
+#define STV090x_IRQMASK0			0xf127
+#define STV090x_OFFST_MDEMOD_LOCKB_1_FIELD	7
+#define STV090x_WIDTH_MDEMOD_LOCKB_1_FIELD	1
+#define STV090x_OFFST_MDEMOD_LOCK_1_FIELD	6
+#define STV090x_WIDTH_MDEMOD_LOCK_1_FIELD	1
+#define STV090x_OFFST_MDEMOD_IRQ_1_FIELD	5
+#define STV090x_WIDTH_MDEMOD_IRQ_1_FIELD	1
+#define STV090x_OFFST_MBCH_ERRFLAG_FIELD	4
+#define STV090x_WIDTH_MBCH_ERRFLAG_FIELD	1
+#define STV090x_OFFST_MDISEQC2RX_IRQ_FIELD	3
+#define STV090x_WIDTH_MDISEQC2RX_IRQ_FIELD	1
+#define STV090x_OFFST_MDISEQC2TX_IRQ_FIELD	2
+#define STV090x_WIDTH_MDISEQC2TX_IRQ_FIELD	1
+#define STV090x_OFFST_MDISEQC1RX_IRQ_FIELD	1
+#define STV090x_WIDTH_MDISEQC1RX_IRQ_FIELD	1
+#define STV090x_OFFST_MDISEQC1TX_IRQ_FIELD	0
+#define STV090x_WIDTH_MDISEQC1TX_IRQ_FIELD	1
+
+#define STV090x_I2CCFG				0xf129
+#define STV090x_OFFST_12C_FASTMODE_FIELD	3
+#define STV090x_WIDTH_12C_FASTMODE_FIELD	1
+#define STV090x_OFFST_12CADDR_INC_FIELD		0
+#define STV090x_WIDTH_12CADDR_INC_FIELD		2
+
+#define STV090x_Px_I2CRPT(__x)			(0xf12a + (__x - 1) * 0x1)
+#define STV090x_P1_I2CRPT			STV090x_Px_I2CRPT(1)
+#define STV090x_P2_I2CRPT			STV090x_Px_I2CRPT(2)
+#define STV090x_OFFST_Px_I2CT_ON_FIELD		7
+#define STV090x_WIDTH_Px_I2CT_ON_FIELD		1
+#define STV090x_OFFST_Px_ENARPT_LEVEL_FIELD	4
+#define STV090x_WIDTH_Px_ENARPT_LEVEL_FIELD	3
+#define STV090x_OFFST_Px_SCLT_DELAY_FIELD	3
+#define STV090x_WIDTH_Px_SCLT_DELAY_FIELD	1
+#define STV090x_OFFST_Px_STOP_ENABLE_FIELD	2
+#define STV090x_WIDTH_Px_STOP_ENABLE_FIELD	1
+#define STV090x_OFFST_Px_STOP_SDAT2SDA_FIELD	1
+#define STV090x_WIDTH_Px_STOP_SDAT2SDA_FIELD	1
+
+#define STV090x_CLKI2CFG			0xf140
+#define STV090x_OFFST_CLKI2_OPD_FIELD		7
+#define STV090x_WIDTH_CLKI2_OPD_FIELD		1
+#define STV090x_OFFST_CLKI2_CONFIG_FIELD	1
+#define STV090x_WIDTH_CLKI2_CONFIG_FIELD	6
+#define STV090x_OFFST_CLKI2_XOR_FIELD		0
+#define STV090x_WIDTH_CLKI2_XOR_FIELD		1
+
+#define STV090x_GPIOxCFG(__x)			(0xf141 + (__x - 1))
+#define STV090x_GPIO1CFG			STV090x_GPIOxCFG(1)
+#define STV090x_GPIO2CFG			STV090x_GPIOxCFG(2)
+#define STV090x_GPIO3CFG			STV090x_GPIOxCFG(3)
+#define STV090x_GPIO4CFG			STV090x_GPIOxCFG(4)
+#define STV090x_GPIO5CFG			STV090x_GPIOxCFG(5)
+#define STV090x_GPIO6CFG			STV090x_GPIOxCFG(6)
+#define STV090x_GPIO7CFG			STV090x_GPIOxCFG(7)
+#define STV090x_GPIO8CFG			STV090x_GPIOxCFG(8)
+#define STV090x_GPIO9CFG			STV090x_GPIOxCFG(9)
+#define STV090x_GPIO10CFG			STV090x_GPIOxCFG(10)
+#define STV090x_GPIO11CFG			STV090x_GPIOxCFG(11)
+#define STV090x_GPIO12CFG			STV090x_GPIOxCFG(12)
+#define STV090x_GPIO13CFG			STV090x_GPIOxCFG(13)
+#define STV090x_OFFST_GPIOx_OPD_FIELD		7
+#define STV090x_WIDTH_GPIOx_OPD_FIELD		1
+#define STV090x_OFFST_GPIOx_CONFIG_FIELD	1
+#define STV090x_WIDTH_GPIOx_CONFIG_FIELD	6
+#define STV090x_OFFST_GPIOx_XOR_FIELD		0
+#define STV090x_WIDTH_GPIOx_XOR_FIELD		1
+
+#define STV090x_CSxCFG(__x)			(0xf14e + __x * 0x1)
+#define STV090x_CS0CFG				STV090x_CSxCFG(0)
+#define STV090x_CS1CFG				STV090x_CSxCFG(1)
+#define STV090x_OFFST_CSX_OPD_FIELD		7
+#define STV090x_WIDTH_CSX_OPD_FIELD		1
+#define STV090x_OFFST_CSX_CONFIG_FIELD		1
+#define STV090x_WIDTH_CSX_CONFIG_FIELD		6
+#define STV090x_OFFST_CSX_XOR_FIELD		0
+#define STV090x_WIDTH_CSX_XOR_FIELD		1
+
+
+#define STV090x_STDBYCFG			0xf150
+#define STV090x_OFFST_STDBY_OPD_FIELD		7
+#define STV090x_WIDTH_STDBY_OPD_FIELD		1
+#define STV090x_OFFST_STDBY_CONFIG_FIELD	1
+#define STV090x_WIDTH_STDBY_CONFIG_FIELD	6
+#define STV090x_OFFST_STDBY_XOR_FIELD		0
+#define STV090x_WIDTH_STDBY_XOR_FIELD		1
+
+#define STV090x_DIRCLKCFG			0xf151
+#define STV090x_OFFST_DIRCLK_OPD_FIELD		7
+#define STV090x_WIDTH_DIRCLK_OPD_FIELD		1
+#define STV090x_OFFST_DIRCLK_CONFIG_FIELD	1
+#define STV090x_WIDTH_DIRCLK_CONFIG_FIELD	6
+#define STV090x_OFFST_DIRCLK_XOR_FIELD		0
+#define STV090x_WIDTH_DIRCLK_XOR_FIELD		1
+
+
+#define STV090x_AGCRFxCFG(__x)			(0xf152 + (__x - 1) * 0x4)
+#define STV090x_AGCRF1CFG			STV090x_AGCRFxCFG(1)
+#define STV090x_AGCRF2CFG			STV090x_AGCRFxCFG(2)
+#define STV090x_OFFST_AGCRFx_OPD_FIELD		7
+#define STV090x_WIDTH_AGCRFx_OPD_FIELD		1
+#define STV090x_OFFST_AGCRFx_CONFIG_FIELD	1
+#define STV090x_WIDTH_AGCRFx_CONFIG_FIELD	6
+#define STV090x_OFFST_AGCRFx_XOR_FIELD		0
+#define STV090x_WIDTH_AGCRFx_XOR_FIELD		1
+
+#define STV090x_SDATxCFG(__x)			(0xf153 + (__x - 1) * 0x4)
+#define STV090x_SDAT1CFG			STV090x_SDATxCFG(1)
+#define STV090x_SDAT2CFG			STV090x_SDATxCFG(2)
+#define STV090x_OFFST_SDATx_OPD_FIELD		7
+#define STV090x_WIDTH_SDATx_OPD_FIELD		1
+#define STV090x_OFFST_SDATx_CONFIG_FIELD	1
+#define STV090x_WIDTH_SDATx_CONFIG_FIELD	6
+#define STV090x_OFFST_SDATx_XOR_FIELD		0
+#define STV090x_WIDTH_SDATx_XOR_FIELD		1
+
+#define STV090x_SCLTxCFG(__x)			(0xf154 + (__x - 1) * 0x4)
+#define STV090x_SCLT1CFG			STV090x_SCLTxCFG(1)
+#define STV090x_SCLT2CFG			STV090x_SCLTxCFG(2)
+#define STV090x_OFFST_SCLTx_OPD_FIELD		7
+#define STV090x_WIDTH_SCLTx_OPD_FIELD		1
+#define STV090x_OFFST_SCLTx_CONFIG_FIELD	1
+#define STV090x_WIDTH_SCLTx_CONFIG_FIELD	6
+#define STV090x_OFFST_SCLTx_XOR_FIELD		0
+#define STV090x_WIDTH_SCLTx_XOR_FIELD		1
+
+#define STV090x_DISEQCOxCFG(__x)		(0xf155 + (__x - 1) * 0x4)
+#define STV090x_DISEQCO1CFG			STV090x_DISEQCOxCFG(1)
+#define STV090x_DISEQCO2CFG			STV090x_DISEQCOxCFG(2)
+#define STV090x_OFFST_DISEQCOx_OPD_FIELD	7
+#define STV090x_WIDTH_DISEQCOx_OPD_FIELD	1
+#define STV090x_OFFST_DISEQCOx_CONFIG_FIELD	1
+#define STV090x_WIDTH_DISEQCOx_CONFIG_FIELD	6
+#define STV090x_OFFST_DISEQCOx_XOR_FIELD	0
+#define STV090x_WIDTH_DISEQCOx_XOR_FIELD	1
+
+#define STV090x_CLKOUT27CFG			0xf15a
+#define STV090x_OFFST_CLKOUT27_OPD_FIELD	7
+#define STV090x_WIDTH_CLKOUT27_OPD_FIELD	1
+#define STV090x_OFFST_CLKOUT27_CONFIG_FIELD	1
+#define STV090x_WIDTH_CLKOUT27_CONFIG_FIELD	6
+#define STV090x_OFFST_CLKOUT27_XOR_FIELD	0
+#define STV090x_WIDTH_CLKOUT27_XOR_FIELD	1
+
+#define STV090x_ERRORxCFG(__x)			(0xf15b + (__x - 1) * 0x5)
+#define STV090x_ERROR1CFG			STV090x_ERRORxCFG(1)
+#define STV090x_ERROR2CFG			STV090x_ERRORxCFG(2)
+#define STV090x_ERROR3CFG			STV090x_ERRORxCFG(3)
+#define STV090x_OFFST_ERRORx_OPD_FIELD		7
+#define STV090x_WIDTH_ERRORx_OPD_FIELD		1
+#define STV090x_OFFST_ERRORx_CONFIG_FIELD	1
+#define STV090x_WIDTH_ERRORx_CONFIG_FIELD	6
+#define STV090x_OFFST_ERRORx_XOR_FIELD		0
+#define STV090x_WIDTH_ERRORx_XOR_FIELD		1
+
+#define STV090x_DPNxCFG(__x)			(0xf15c + (__x - 1) * 0x5)
+#define STV090x_DPN1CFG				STV090x_DPNxCFG(1)
+#define STV090x_DPN2CFG				STV090x_DPNxCFG(2)
+#define STV090x_DPN3CFG				STV090x_DPNxCFG(3)
+#define STV090x_OFFST_DPNx_OPD_FIELD		7
+#define STV090x_WIDTH_DPNx_OPD_FIELD		1
+#define STV090x_OFFST_DPNx_CONFIG_FIELD		1
+#define STV090x_WIDTH_DPNx_CONFIG_FIELD		6
+#define STV090x_OFFST_DPNx_XOR_FIELD		0
+#define STV090x_WIDTH_DPNx_XOR_FIELD		1
+
+#define STV090x_STROUTxCFG(__x)			(0xf15d + (__x - 1) * 0x5)
+#define STV090x_STROUT1CFG			STV090x_STROUTxCFG(1)
+#define STV090x_STROUT2CFG			STV090x_STROUTxCFG(2)
+#define STV090x_STROUT3CFG			STV090x_STROUTxCFG(3)
+#define STV090x_OFFST_STROUTx_OPD_FIELD		7
+#define STV090x_WIDTH_STROUTx_OPD_FIELD		1
+#define STV090x_OFFST_STROUTx_CONFIG_FIELD	1
+#define STV090x_WIDTH_STROUTx_CONFIG_FIELD	6
+#define STV090x_OFFST_STROUTx_XOR_FIELD		0
+#define STV090x_WIDTH_STROUTx_XOR_FIELD		1
+
+#define STV090x_CLKOUTxCFG(__x)			(0xf15e + (__x - 1) * 0x5)
+#define STV090x_CLKOUT1CFG			STV090x_CLKOUTxCFG(1)
+#define STV090x_CLKOUT2CFG			STV090x_CLKOUTxCFG(2)
+#define STV090x_CLKOUT3CFG			STV090x_CLKOUTxCFG(3)
+#define STV090x_OFFST_CLKOUTx_OPD_FIELD		7
+#define STV090x_WIDTH_CLKOUTx_OPD_FIELD		1
+#define STV090x_OFFST_CLKOUTx_CONFIG_FIELD	1
+#define STV090x_WIDTH_CLKOUTx_CONFIG_FIELD	6
+#define STV090x_OFFST_CLKOUTx_XOR_FIELD		0
+#define STV090x_WIDTH_CLKOUTx_XOR_FIELD		1
+
+#define STV090x_DATAxCFG(__x)			(0xf15f + (__x - 71) * 0x5)
+#define STV090x_DATA71CFG			STV090x_DATAxCFG(71)
+#define STV090x_DATA72CFG			STV090x_DATAxCFG(72)
+#define STV090x_DATA73CFG			STV090x_DATAxCFG(73)
+#define STV090x_OFFST_DATAx_OPD_FIELD		7
+#define STV090x_WIDTH_DATAx_OPD_FIELD		1
+#define STV090x_OFFST_DATAx_CONFIG_FIELD	1
+#define STV090x_WIDTH_DATAx_CONFIG_FIELD	6
+#define STV090x_OFFST_DATAx_XOR_FIELD		0
+#define STV090x_WIDTH_DATAx_XOR_FIELD		1
+
+#define STV090x_NCOARSE				0xf1b3
+#define STV090x_OFFST_M_DIV_FIELD		0
+#define STV090x_WIDTH_M_DIV_FIELD		8
+
+#define STV090x_SYNTCTRL			0xf1b6
+#define STV090x_OFFST_STANDBY_FIELD		7
+#define STV090x_WIDTH_STANDBY_FIELD		1
+#define STV090x_OFFST_BYPASSPLLCORE_FIELD	6
+#define STV090x_WIDTH_BYPASSPLLCORE_FIELD	1
+#define STV090x_OFFST_SELX1RATIO_FIELD		5
+#define STV090x_WIDTH_SELX1RATIO_FIELD		1
+#define STV090x_OFFST_STOP_PLL_FIELD		3
+#define STV090x_WIDTH_SELX1RATIO_FIELD		1
+#define STV090x_OFFST_BYPASSPLLFSK_FIELD	2
+#define STV090x_WIDTH_BYPASSPLLFSK_FIELD	1
+#define STV090x_OFFST_SELOSCI_FIELD		1
+#define STV090x_WIDTH_SELOSCI_FIELD		1
+#define STV090x_OFFST_BYPASSPLLADC_FIELD	0
+#define STV090x_WIDTH_BYPASSPLLADC_FIELD	1
+
+#define STV090x_FILTCTRL			0xf1b7
+#define STV090x_OFFST_INV_CLK135_FIELD		7
+#define STV090x_WIDTH_INV_CLK135_FIELD		1
+#define STV090x_OFFST_SEL_FSKCKDIV_FIELD	2
+#define STV090x_WIDTH_SEL_FSKCKDIV_FIELD	1
+#define STV090x_OFFST_INV_CLKFSK_FIELD		1
+#define STV090x_WIDTH_INV_CLKFSK_FIELD		1
+#define STV090x_OFFST_BYPASS_APPLI_FIELD	0
+#define STV090x_WIDTH_BYPASS_APPLI_FIELD	1
+
+#define STV090x_PLLSTAT				0xf1b8
+#define STV090x_OFFST_PLLLOCK_FIELD		0
+#define STV090x_WIDTH_PLLLOCK_FIELD		1
+
+#define STV090x_STOPCLK1			0xf1c2
+#define STV090x_OFFST_STOP_CLKPKDT2_FIELD	6
+#define STV090x_WIDTH_STOP_CLKPKDT2_FIELD	1
+#define STV090x_OFFST_STOP_CLKPKDT1_FIELD	5
+#define STV090x_WIDTH_STOP_CLKPKDT1_FIELD	1
+#define STV090x_OFFST_STOP_CLKFEC_FIELD		4
+#define STV090x_WIDTH_STOP_CLKFEC_FIELD		1
+#define STV090x_OFFST_STOP_CLKADCI2_FIELD	3
+#define STV090x_WIDTH_STOP_CLKADCI2_FIELD	1
+#define STV090x_OFFST_INV_CLKADCI2_FIELD	2
+#define STV090x_WIDTH_INV_CLKADCI2_FIELD	1
+#define STV090x_OFFST_STOP_CLKADCI1_FIELD	1
+#define STV090x_WIDTH_STOP_CLKADCI1_FIELD	1
+#define STV090x_OFFST_INV_CLKADCI1_FIELD	0
+#define STV090x_WIDTH_INV_CLKADCI1_FIELD	1
+
+#define STV090x_STOPCLK2			0xf1c3
+#define STV090x_OFFST_STOP_CLKSAMP2_FIELD	4
+#define STV090x_WIDTH_STOP_CLKSAMP2_FIELD	1
+#define STV090x_OFFST_STOP_CLKSAMP1_FIELD	3
+#define STV090x_WIDTH_STOP_CLKSAMP1_FIELD	1
+#define STV090x_OFFST_STOP_CLKVIT2_FIELD	2
+#define STV090x_WIDTH_STOP_CLKVIT2_FIELD	1
+#define STV090x_OFFST_STOP_CLKVIT1_FIELD	1
+#define STV090x_WIDTH_STOP_CLKVIT1_FIELD	1
+#define STV090x_OFFST_STOP_CLKTS_FIELD		0
+#define STV090x_WIDTH_STOP_CLKTS_FIELD		1
+
+#define STV090x_TSTTNR0				0xf1df
+#define STV090x_OFFST_SEL_FSK_FIELD		7
+#define STV090x_WIDTH_SEL_FSK_FIELD		1
+#define STV090x_OFFST_FSK_PON_FIELD		2
+#define STV090x_WIDTH_FSK_PON_FIELD		1
+
+#define STV090x_TSTTNR1				0xf1e0
+#define STV090x_OFFST_ADC1_PON_FIELD		1
+#define STV090x_WIDTH_ADC1_PON_FIELD		1
+#define STV090x_OFFST_ADC1_INMODE_FIELD		0
+#define STV090x_WIDTH_ADC1_INMODE_FIELD		1
+
+#define STV090x_TSTTNR2				0xf1e1
+#define STV090x_OFFST_DISEQC1_PON_FIELD		5
+#define STV090x_WIDTH_DISEQC1_PON_FIELD		1
+
+#define STV090x_TSTTNR3				0xf1e2
+#define STV090x_OFFST_ADC2_PON_FIELD		1
+#define STV090x_WIDTH_ADC2_PON_FIELD		1
+#define STV090x_OFFST_ADC2_INMODE_FIELD		0
+#define STV090x_WIDTH_ADC2_INMODE_FIELD		1
+
+#define STV090x_TSTTNR4				0xf1e3
+#define STV090x_OFFST_DISEQC2_PON_FIELD		5
+#define STV090x_WIDTH_DISEQC2_PON_FIELD		1
+
+#define STV090x_FSKTFC2				0xf170
+#define STV090x_OFFST_FSKT_KMOD_FIELD		2
+#define STV090x_WIDTH_FSKT_KMOD_FIELD		6
+#define STV090x_OFFST_FSKT_CAR_FIELD		0
+#define STV090x_WIDTH_FSKT_CAR_FIELD		2
+
+#define STV090x_FSKTFC1				0xf171
+#define STV090x_OFFST_FSKTC1_CAR_FIELD		0
+#define STV090x_WIDTH_FSKTC1_CAR_FIELD		8
+
+#define STV090x_FSKTFC0				0xf172
+#define STV090x_OFFST_FSKTC0_CAR_FIELD		0
+#define STV090x_WIDTH_FSKTC0_CAR_FIELD		8
+
+#define STV090x_FSKTDELTAF1			0xf173
+#define STV090x_OFFST_FSKTF1_DELTAF_FIELD	0
+#define STV090x_WIDTH_FSKTF1_DELTAF_FIELD	4
+
+#define STV090x_FSKTDELTAF0			0xf174
+#define STV090x_OFFST_FSKTF0_DELTAF_FIELD	0
+#define STV090x_WIDTH_FSKTF0_DELTAF_FIELD	8
+
+#define STV090x_FSKTCTRL			0xf175
+#define STV090x_OFFST_FSKT_EN_SGN_FIELD		6
+#define STV090x_WIDTH_FSKT_EN_SGN_FIELD		1
+#define STV090x_OFFST_FSKT_MOD_SGN_FIELD	5
+#define STV090x_WIDTH_FSKT_MOD_SGN_FIELD	1
+#define STV090x_OFFST_FSKT_MOD_EN_FIELD		2
+#define STV090x_WIDTH_FSKT_MOD_EN_FIELD		3
+#define STV090x_OFFST_FSKT_DACMODE_FIELD	0
+#define STV090x_WIDTH_FSKT_DACMODE_FIELD	2
+
+#define STV090x_FSKRFC2				0xf176
+#define STV090x_OFFST_FSKRC2_DETSGN_FIELD	6
+#define STV090x_WIDTH_FSKRC2_DETSGN_FIELD	1
+#define STV090x_OFFST_FSKRC2_OUTSGN_FIELD	5
+#define STV090x_WIDTH_FSKRC2_OUTSGN_FIELD	1
+#define STV090x_OFFST_FSKRC2_KAGC_FIELD		2
+#define STV090x_WIDTH_FSKRC2_KAGC_FIELD		3
+#define STV090x_OFFST_FSKRC2_CAR_FIELD		0
+#define STV090x_WIDTH_FSKRC2_CAR_FIELD		2
+
+#define STV090x_FSKRFC1				0xf177
+#define STV090x_OFFST_FSKRC1_CAR_FIELD		0
+#define STV090x_WIDTH_FSKRC1_CAR_FIELD		8
+
+#define STV090x_FSKRFC0				0xf178
+#define STV090x_OFFST_FSKRC0_CAR_FIELD		0
+#define STV090x_WIDTH_FSKRC0_CAR_FIELD		8
+
+#define STV090x_FSKRK1				0xf179
+#define STV090x_OFFST_FSKR_K1_EXP_FIELD		5
+#define STV090x_WIDTH_FSKR_K1_EXP_FIELD		3
+#define STV090x_OFFST_FSKR_K1_MANT_FIELD	0
+#define STV090x_WIDTH_FSKR_K1_MANT_FIELD	5
+
+#define STV090x_FSKRK2				0xf17a
+#define STV090x_OFFST_FSKR_K2_EXP_FIELD		5
+#define STV090x_WIDTH_FSKR_K2_EXP_FIELD		3
+#define STV090x_OFFST_FSKR_K2_MANT_FIELD	0
+#define STV090x_WIDTH_FSKR_K2_MANT_FIELD	5
+
+#define STV090x_FSKRAGCR			0xf17b
+#define STV090x_OFFST_FSKR_OUTCTL_FIELD		6
+#define STV090x_WIDTH_FSKR_OUTCTL_FIELD		2
+#define STV090x_OFFST_FSKR_AGC_REF_FIELD	0
+#define STV090x_WIDTH_FSKR_AGC_REF_FIELD	6
+
+#define STV090x_FSKRAGC				0xf17c
+#define STV090x_OFFST_FSKR_AGC_ACCU_FIELD	0
+#define STV090x_WIDTH_FSKR_AGC_ACCU_FIELD	8
+
+#define STV090x_FSKRALPHA			0xf17d
+#define STV090x_OFFST_FSKR_ALPHA_EXP_FIELD	2
+#define STV090x_WIDTH_FSKR_ALPHA_EXP_FIELD	3
+#define STV090x_OFFST_FSKR_ALPHA_M_FIELD	0
+#define STV090x_WIDTH_FSKR_ALPHA_M_FIELD	2
+
+#define STV090x_FSKRPLTH1			0xf17e
+#define STV090x_OFFST_FSKR_BETA_FIELD		4
+#define STV090x_WIDTH_FSKR_BETA_FIELD		4
+#define STV090x_OFFST_FSKR_PLL_TRESH1_FIELD	0
+#define STV090x_WIDTH_FSKR_PLL_TRESH1_FIELD	4
+
+#define STV090x_FSKRPLTH0			0xf17f
+#define STV090x_OFFST_FSKR_PLL_TRESH0_FIELD	0
+#define STV090x_WIDTH_FSKR_PLL_TRESH0_FIELD	8
+
+#define STV090x_FSKRDF1				0xf180
+#define STV090x_OFFST_FSKR_DELTAF1_FIELD	0
+#define STV090x_WIDTH_FSKR_DELTAF1_FIELD	5
+
+#define STV090x_FSKRDF0				0xf181
+#define STV090x_OFFST_FSKR_DELTAF0_FIELD	0
+#define STV090x_WIDTH_FSKR_DELTAF0_FIELD	8
+
+#define STV090x_FSKRSTEPP			0xf182
+#define STV090x_OFFST_FSKR_STEP_PLUS_FIELD	0
+#define STV090x_WIDTH_FSKR_STEP_PLUS_FIELD	8
+
+#define STV090x_FSKRSTEPM			0xf183
+#define STV090x_OFFST_FSKR_STEP_MINUS_FIELD	0
+#define STV090x_WIDTH_FSKR_STEP_MINUS_FIELD	8
+
+#define STV090x_FSKRDET1			0xf184
+#define STV090x_OFFST_FSKR_CARDET1_ACCU_FIELD	0
+#define STV090x_WIDTH_FSKR_CARDET1_ACCU_FIELD	4
+
+#define STV090x_FSKRDET0			0xf185
+#define STV090x_OFFST_FSKR_CARDET0_ACCU_FIELD	0
+#define STV090x_WIDTH_FSKR_CARDET0_ACCU_FIELD	8
+
+#define STV090x_FSKRDTH1				0xf186
+#define STV090x_OFFST_FSKR_CARLOSS_THRESH1_FIELD	4
+#define STV090x_WIDTH_FSKR_CARLOSS_THRESH1_FIELD	4
+#define STV090x_OFFST_FSKR_CARDET_THRESH1_FIELD		0
+#define STV090x_WIDTH_FSKR_CARDET_THRESH1_FIELD		4
+
+#define STV090x_FSKRDTH0			0xf187
+#define STV090x_OFFST_FSKR_CARDET_THRESH0_FIELD	0
+#define STV090x_WIDTH_FSKR_CARDET_THRESH0_FIELD	8
+
+#define STV090x_FSKRLOSS			0xf188
+#define STV090x_OFFST_FSKR_CARLOSS_THRESH_FIELD	0
+#define STV090x_WIDTH_FSKR_CARLOSS_THRESH_FIELD	8
+
+#define STV090x_Px_DISTXCTL(__x)		(0xF1A0 - (__x - 1) * 0x10)
+#define STV090x_P1_DISTXCTL			STV090x_Px_DISTXCTL(1)
+#define STV090x_P2_DISTXCTL			STV090x_Px_DISTXCTL(2)
+#define STV090x_OFFST_Px_TIM_OFF_FIELD		7
+#define STV090x_WIDTH_Px_TIM_OFF_FIELD		1
+#define STV090x_OFFST_Px_DISEQC_RESET_FIELD	6
+#define STV090x_WIDTH_Px_DISEQC_RESET_FIELD	1
+#define STV090x_OFFST_Px_TIM_CMD_FIELD		4
+#define STV090x_WIDTH_Px_TIM_CMD_FIELD		2
+#define STV090x_OFFST_Px_DIS_PRECHARGE_FIELD	3
+#define STV090x_WIDTH_Px_DIS_PRECHARGE_FIELD	1
+#define STV090x_OFFST_Px_DISTX_MODE_FIELD	0
+#define STV090x_WIDTH_Px_DISTX_MODE_FIELD	3
+
+#define STV090x_Px_DISRXCTL(__x)		(0xf1a1 - (__x - 1) * 0x10)
+#define STV090x_P1_DISRXCTL			STV090x_Px_DISRXCTL(1)
+#define STV090x_P2_DISRXCTL			STV090x_Px_DISRXCTL(2)
+#define STV090x_OFFST_Px_RECEIVER_ON_FIELD	7
+#define STV090x_WIDTH_Px_RECEIVER_ON_FIELD	1
+#define STV090x_OFFST_Px_IGNO_SHORT22K_FIELD	6
+#define STV090x_WIDTH_Px_IGNO_SHORT22K_FIELD	1
+#define STV090x_OFFST_Px_ONECHIP_TRX_FIELD	5
+#define STV090x_WIDTH_Px_ONECHIP_TRX_FIELD	1
+#define STV090x_OFFST_Px_EXT_ENVELOP_FIELD	4
+#define STV090x_WIDTH_Px_EXT_ENVELOP_FIELD	1
+#define STV090x_OFFST_Px_PIN_SELECT_FIELD	2
+#define STV090x_WIDTH_Px_PIN_SELECT_FIELD	2
+#define STV090x_OFFST_Px_IRQ_RXEND_FIELD	1
+#define STV090x_WIDTH_Px_IRQ_RXEND_FIELD	1
+#define STV090x_OFFST_Px_IRQ_4NBYTES_FIELD	0
+#define STV090x_WIDTH_Px_IRQ_4NBYTES_FIELD	1
+
+#define STV090x_Px_DISRX_ST0(__x)		(0xf1a4 - (__x - 1) * 0x10)
+#define STV090x_P1_DISRX_ST0			STV090x_Px_DISRX_ST0(1)
+#define STV090x_P2_DISRX_ST0			STV090x_Px_DISRX_ST0(2)
+#define STV090x_OFFST_Px_RX_END_FIELD		7
+#define STV090x_WIDTH_Px_RX_END_FIELD		1
+#define STV090x_OFFST_Px_RX_ACTIVE_FIELD	6
+#define STV090x_WIDTH_Px_RX_ACTIVE_FIELD	1
+#define STV090x_OFFST_Px_SHORT_22KHZ_FIELD	5
+#define STV090x_WIDTH_Px_SHORT_22KHZ_FIELD	1
+#define STV090x_OFFST_Px_CONT_TONE_FIELD	4
+#define STV090x_WIDTH_Px_CONT_TONE_FIELD	1
+#define STV090x_OFFST_Px_FIFO_4BREADY_FIELD	3
+#define STV090x_WIDTH_Px_FIFO_4BREADY_FIELD	2
+#define STV090x_OFFST_Px_FIFO_EMPTY_FIELD	2
+#define STV090x_WIDTH_Px_FIFO_EMPTY_FIELD	1
+#define STV090x_OFFST_Px_ABORT_DISRX_FIELD	0
+#define STV090x_WIDTH_Px_ABORT_DISRX_FIELD	1
+
+#define STV090x_Px_DISRX_ST1(__x)		(0xf1a5 - (__x - 1) * 0x10)
+#define STV090x_P1_DISRX_ST1			STV090x_Px_DISRX_ST1(1)
+#define STV090x_P2_DISRX_ST1			STV090x_Px_DISRX_ST1(2)
+#define STV090x_OFFST_Px_RX_FAIL_FIELD		7
+#define STV090x_WIDTH_Px_RX_FAIL_FIELD		1
+#define STV090x_OFFST_Px_FIFO_PARITYFAIL_FIELD	6
+#define STV090x_WIDTH_Px_FIFO_PARITYFAIL_FIELD	1
+#define STV090x_OFFST_Px_RX_NONBYTE_FIELD	5
+#define STV090x_WIDTH_Px_RX_NONBYTE_FIELD	1
+#define STV090x_OFFST_Px_FIFO_OVERFLOW_FIELD	4
+#define STV090x_WIDTH_Px_FIFO_OVERFLOW_FIELD	1
+#define STV090x_OFFST_Px_FIFO_BYTENBR_FIELD	0
+#define STV090x_WIDTH_Px_FIFO_BYTENBR_FIELD	4
+
+#define STV090x_Px_DISRXDATA(__x)		(0xf1a6 - (__x - 1) * 0x10)
+#define STV090x_P1_DISRXDATA			STV090x_Px_DISRXDATA(1)
+#define STV090x_P2_DISRXDATA			STV090x_Px_DISRXDATA(2)
+#define STV090x_OFFST_Px_DISRX_DATA_FIELD	0
+#define STV090x_WIDTH_Px_DISRX_DATA_FIELD	8
+
+#define STV090x_Px_DISTXDATA(__x)		(0xf1a7 - (__x - 1) * 0x10)
+#define STV090x_P1_DISTXDATA			STV090x_Px_DISTXDATA(1)
+#define STV090x_P2_DISTXDATA			STV090x_Px_DISTXDATA(2)
+#define STV090x_OFFST_Px_DISEQC_FIFO_FIELD	0
+#define STV090x_WIDTH_Px_DISEQC_FIFO_FIELD	8
+
+#define STV090x_Px_DISTXSTATUS(__x)		(0xf1a8 - (__x - 1) * 0x10)
+#define STV090x_P1_DISTXSTATUS			STV090x_Px_DISTXSTATUS(1)
+#define STV090x_P2_DISTXSTATUS			STV090x_Px_DISTXSTATUS(2)
+#define STV090x_OFFST_Px_TX_FAIL_FIELD		7
+#define STV090x_WIDTH_Px_TX_FAIL_FIELD		1
+#define STV090x_OFFST_Px_FIFO_FULL_FIELD	6
+#define STV090x_WIDTH_Px_FIFO_FULL_FIELD	1
+#define STV090x_OFFST_Px_TX_IDLE_FIELD		5
+#define STV090x_WIDTH_Px_TX_IDLE_FIELD		1
+#define STV090x_OFFST_Px_GAP_BURST_FIELD	4
+#define STV090x_WIDTH_Px_GAP_BURST_FIELD	1
+#define STV090x_OFFST_Px_TXFIFO_BYTES_FIELD	0
+#define STV090x_WIDTH_Px_TXFIFO_BYTES_FIELD	4
+
+#define STV090x_Px_F22TX(__x)			(0xf1a9 - (__x - 1) * 0x10)
+#define STV090x_P1_F22TX			STV090x_Px_F22TX(1)
+#define STV090x_P2_F22TX			STV090x_Px_F22TX(2)
+#define STV090x_OFFST_Px_F22_REG_FIELD		0
+#define STV090x_WIDTH_Px_F22_REG_FIELD		8
+
+#define STV090x_Px_F22RX(__x)			(0xf1aa - (__x - 1) * 0x10)
+#define STV090x_P1_F22RX			STV090x_Px_F22RX(1)
+#define STV090x_P2_F22RX			STV090x_Px_F22RX(2)
+#define STV090x_OFFST_Px_F22RX_REG_FIELD	0
+#define STV090x_WIDTH_Px_F22RX_REG_FIELD	8
+
+#define STV090x_Px_ACRPRESC(__x)		(0xf1ac - (__x - 1) * 0x10)
+#define STV090x_P1_ACRPRESC			STV090x_Px_ACRPRESC(1)
+#define STV090x_P2_ACRPRESC			STV090x_Px_ACRPRESC(2)
+#define STV090x_OFFST_Px_ACR_PRESC_FIELD	0
+#define STV090x_WIDTH_Px_ACR_PRESC_FIELD	3
+
+#define STV090x_Px_ACRDIV(__x)			(0xf1ad - (__x - 1) * 0x10)
+#define STV090x_P1_ACRDIV			STV090x_Px_ACRDIV(1)
+#define STV090x_P2_ACRDIV			STV090x_Px_ACRDIV(2)
+#define STV090x_OFFST_Px_ACR_DIV_FIELD		0
+#define STV090x_WIDTH_Px_ACR_DIV_FIELD		8
+
+#define STV090x_Px_IQCONST(__x)			(0xF400 - (__x - 1) * 0x200)
+#define STV090x_P1_IQCONST			STV090x_Px_IQCONST(1)
+#define STV090x_P2_IQCONST			STV090x_Px_IQCONST(2)
+#define STV090x_OFFST_Px_CONSTEL_SELECT_FIELD	5
+#define STV090x_WIDTH_Px_CONSTEL_SELECT_FIELD	2
+
+#define STV090x_Px_NOSCFG(__x)			(0xF401 - (__x - 1) * 0x200)
+#define STV090x_P1_NOSCFG			STV090x_Px_NOSCFG(1)
+#define STV090x_P2_NOSCFG			STV090x_Px_NOSCFG(2)
+#define STV090x_OFFST_Px_NOSPLH_BETA_FIELD	3
+#define STV090x_WIDTH_Px_NOSPLH_BETA_FIELD	2
+#define STV090x_OFFST_Px_NOSDATA_BETA_FIELD	0
+#define STV090x_WIDTH_Px_NOSDATA_BETA_FIELD	3
+
+#define STV090x_Px_ISYMB(__x)			(0xF402 - (__x - 1) * 0x200)
+#define STV090x_P1_ISYMB			STV090x_Px_ISYMB(1)
+#define STV090x_P2_ISYMB			STV090x_Px_ISYMB(2)
+#define STV090x_OFFST_Px_I_SYMBOL_FIELD		0
+#define STV090x_WIDTH_Px_I_SYMBOL_FIELD		8
+
+#define STV090x_Px_QSYMB(__x)			(0xF403 - (__x - 1) * 0x200)
+#define STV090x_P1_QSYMB			STV090x_Px_QSYMB(1)
+#define STV090x_P2_QSYMB			STV090x_Px_QSYMB(2)
+#define STV090x_OFFST_Px_Q_SYMBOL_FIELD		0
+#define STV090x_WIDTH_Px_Q_SYMBOL_FIELD		8
+
+#define STV090x_Px_AGC1CFG(__x)			(0xF404 - (__x - 1) * 0x200)
+#define STV090x_P1_AGC1CFG			STV090x_Px_AGC1CFG(1)
+#define STV090x_P2_AGC1CFG			STV090x_Px_AGC1CFG(2)
+#define STV090x_OFFST_Px_DC_FROZEN_FIELD	7
+#define STV090x_WIDTH_Px_DC_FROZEN_FIELD	1
+#define STV090x_OFFST_Px_DC_CORRECT_FIELD	6
+#define STV090x_WIDTH_Px_DC_CORRECT_FIELD	1
+#define STV090x_OFFST_Px_AMM_FROZEN_FIELD	5
+#define STV090x_WIDTH_Px_AMM_FROZEN_FIELD	1
+#define STV090x_OFFST_Px_AMM_CORRECT_FIELD	4
+#define STV090x_WIDTH_Px_AMM_CORRECT_FIELD	1
+#define STV090x_OFFST_Px_QUAD_FROZEN_FIELD	3
+#define STV090x_WIDTH_Px_QUAD_FROZEN_FIELD	1
+#define STV090x_OFFST_Px_QUAD_CORRECT_FIELD	2
+#define STV090x_WIDTH_Px_QUAD_CORRECT_FIELD	1
+
+#define STV090x_Px_AGC1CN(__x)			(0xF406 - (__x - 1) * 0x200)
+#define STV090x_P1_AGC1CN			STV090x_Px_AGC1CN(1)
+#define STV090x_P2_AGC1CN			STV090x_Px_AGC1CN(2)
+#define STV090x_WIDTH_Px_AGC1_LOCKED_FIELD	7
+#define STV090x_OFFST_Px_AGC1_LOCKED_FIELD	1
+#define STV090x_OFFST_Px_AGC1_MINPOWER_FIELD	4
+#define STV090x_WIDTH_Px_AGC1_MINPOWER_FIELD	1
+#define STV090x_OFFST_Px_AGCOUT_FAST_FIELD	3
+#define STV090x_WIDTH_Px_AGCOUT_FAST_FIELD	1
+#define STV090x_OFFST_Px_AGCIQ_BETA_FIELD	0
+#define STV090x_WIDTH_Px_AGCIQ_BETA_FIELD	3
+
+#define STV090x_Px_AGC1REF(__x)			(0xF407 - (__x - 1) * 0x200)
+#define STV090x_P1_AGC1REF			STV090x_Px_AGC1REF(1)
+#define STV090x_P2_AGC1REF			STV090x_Px_AGC1REF(2)
+#define STV090x_OFFST_Px_AGCIQ_REF_FIELD	0
+#define STV090x_WIDTH_Px_AGCIQ_REF_FIELD	8
+
+#define STV090x_Px_IDCCOMP(__x)			(0xF408 - (__x - 1) * 0x200)
+#define STV090x_P1_IDCCOMP			STV090x_Px_IDCCOMP(1)
+#define STV090x_P2_IDCCOMP			STV090x_Px_IDCCOMP(2)
+#define STV090x_OFFST_Px_IAVERAGE_ADJ_FIELD	0
+#define STV090x_WIDTH_Px_IAVERAGE_ADJ_FIELD	8
+
+#define STV090x_Px_QDCCOMP(__x)			(0xF409 - (__x - 1) * 0x200)
+#define STV090x_P1_QDCCOMP			STV090x_Px_QDCCOMP(1)
+#define STV090x_P2_QDCCOMP			STV090x_Px_QDCCOMP(2)
+#define STV090x_OFFST_Px_QAVERAGE_ADJ_FIELD	0
+#define STV090x_WIDTH_Px_QAVERAGE_ADJ_FIELD	8
+
+#define STV090x_Px_POWERI(__x)			(0xF40A - (__x - 1) * 0x200)
+#define STV090x_P1_POWERI			STV090x_Px_POWERI(1)
+#define STV090x_P2_POWERI			STV090x_Px_POWERI(2)
+#define STV090x_OFFST_Px_POWER_I_FIELD		0
+#define STV090x_WIDTH_Px_POWER_I_FIELD		8
+
+#define STV090x_Px_POWERQ(__x)			(0xF40B - (__x - 1) * 0x200)
+#define STV090x_P1_POWERQ			STV090x_Px_POWERQ(1)
+#define STV090x_P2_POWERQ			STV090x_Px_POWERQ(2)
+#define STV090x_OFFST_Px_POWER_Q_FIELD		0
+#define STV090x_WIDTH_Px_POWER_Q_FIELD		8
+
+#define STV090x_Px_AGC1AMM(__x)			(0xF40C - (__x - 1) * 0x200)
+#define STV090x_P1_AGC1AMM			STV090x_Px_AGC1AMM(1)
+#define STV090x_P2_AGC1AMM			STV090x_Px_AGC1AMM(2)
+#define STV090x_OFFST_Px_AMM_VALUE_FIELD	0
+#define STV090x_WIDTH_Px_AMM_VALUE_FIELD	8
+
+#define STV090x_Px_AGC1QUAD(__x)		(0xF40D - (__x - 1) * 0x200)
+#define STV090x_P1_AGC1QUAD			STV090x_Px_AGC1QUAD(1)
+#define STV090x_P2_AGC1QUAD			STV090x_Px_AGC1QUAD(2)
+#define STV090x_OFFST_Px_QUAD_VALUE_FIELD	0
+#define STV090x_WIDTH_Px_QUAD_VALUE_FIELD	8
+
+#define STV090x_Px_AGCIQINy(__x, __y)		(0xF40F - (__x-1) * 0x200 - __y * 0x1)
+#define STV090x_P1_AGCIQIN0			STV090x_Px_AGCIQINy(1, 0)
+#define STV090x_P1_AGCIQIN1			STV090x_Px_AGCIQINy(1, 1)
+#define STV090x_P2_AGCIQIN0			STV090x_Px_AGCIQINy(2, 0)
+#define STV090x_P2_AGCIQIN1			STV090x_Px_AGCIQINy(2, 1)
+#define STV090x_OFFST_Px_AGCIQ_VALUE_FIELD	0
+#define STV090x_WIDTH_Px_AGCIQ_VALUE_FIELD	8
+
+#define STV090x_Px_DEMOD(__x)			(0xF410 - (__x - 1) * 0x200)
+#define STV090x_P1_DEMOD			STV090x_Px_DEMOD(1)
+#define STV090x_P2_DEMOD			STV090x_Px_DEMOD(2)
+#define STV090x_OFFST_Px_MANUAL_S2ROLLOFF_FIELD	7
+#define STV090x_WIDTH_Px_MANUAL_S2ROLLOFF_FIELD	1
+#define STV090x_OFFST_Px_DEMOD_STOP_FIELD	6
+#define STV090x_WIDTH_Px_DEMOD_STOP_FIELD	1
+#define STV090x_OFFST_Px_SPECINV_CONTROL_FIELD	4
+#define STV090x_WIDTH_Px_SPECINV_CONTROL_FIELD	2
+#define STV090x_OFFST_Px_FORCE_ENASAMP_FIELD	3
+#define STV090x_WIDTH_Px_FORCE_ENASAMP_FIELD	1
+#define STV090x_OFFST_Px_MANUAL_SXROLLOFF_FIELD	2
+#define STV090x_WIDTH_Px_MANUAL_SXROLLOFF_FIELD	1
+#define STV090x_OFFST_Px_ROLLOFF_CONTROL_FIELD	0
+#define STV090x_WIDTH_Px_ROLLOFF_CONTROL_FIELD	2
+
+#define STV090x_Px_DMDMODCOD(__x)		(0xF411 - (__x - 1) * 0x200)
+#define STV090x_P1_DMDMODCOD			STV090x_Px_DMDMODCOD(1)
+#define STV090x_P2_DMDMODCOD			STV090x_Px_DMDMODCOD(2)
+#define STV090x_OFFST_Px_MANUAL_MODCOD_FIELD	7
+#define STV090x_WIDTH_Px_MANUAL_MODCOD_FIELD	1
+#define STV090x_OFFST_Px_DEMOD_MODCOD_FIELD	2
+#define STV090x_WIDTH_Px_DEMOD_MODCOD_FIELD	5
+#define STV090x_OFFST_Px_DEMOD_TYPE_FIELD	0
+#define STV090x_WIDTH_Px_DEMOD_TYPE_FIELD	2
+
+#define STV090x_Px_DSTATUS(__x)			(0xF412 - (__x - 1) * 0x200)
+#define STV090x_P1_DSTATUS			STV090x_Px_DSTATUS(1)
+#define STV090x_P2_DSTATUS			STV090x_Px_DSTATUS(2)
+#define STV090x_OFFST_Px_CAR_LOCK_FIELD		7
+#define STV090x_WIDTH_Px_CAR_LOCK_FIELD		1
+#define STV090x_OFFST_Px_TMGLOCK_QUALITY_FIELD	5
+#define STV090x_WIDTH_Px_TMGLOCK_QUALITY_FIELD	2
+#define STV090x_OFFST_Px_LOCK_DEFINITIF_FIELD	3
+#define STV090x_WIDTH_Px_LOCK_DEFINITIF_FIELD	1
+
+#define STV090x_Px_DSTATUS2(__x)		(0xF413 - (__x - 1) * 0x200)
+#define STV090x_P1_DSTATUS2			STV090x_Px_DSTATUS2(1)
+#define STV090x_P2_DSTATUS2			STV090x_Px_DSTATUS2(2)
+#define STV090x_OFFST_Px_DEMOD_DELOCK_FIELD	7
+#define STV090x_WIDTH_Px_DEMOD_DELOCK_FIELD	1
+#define STV090x_OFFST_Px_AGC1_NOSIGNALACK_FIELD	3
+#define STV090x_WIDTH_Px_AGC1_NOSIGNALACK_FIELD	1
+#define STV090x_OFFST_Px_AGC2_OVERFLOW_FIELD	2
+#define STV090x_WIDTH_Px_AGC2_OVERFLOW_FIELD	1
+#define STV090x_OFFST_Px_CFR_OVERFLOW_FIELD	1
+#define STV090x_WIDTH_Px_CFR_OVERFLOW_FIELD	1
+#define STV090x_OFFST_Px_GAMMA_OVERUNDER_FIELD	0
+#define STV090x_WIDTH_Px_GAMMA_OVERUNDER_FIELD	1
+
+#define STV090x_Px_DMDCFGMD(__x)		(0xF414 - (__x - 1) * 0x200)
+#define STV090x_P1_DMDCFGMD			STV090x_Px_DMDCFGMD(1)
+#define STV090x_P2_DMDCFGMD			STV090x_Px_DMDCFGMD(2)
+#define STV090x_OFFST_Px_DVBS2_ENABLE_FIELD	7
+#define STV090x_WIDTH_Px_DVBS2_ENABLE_FIELD	1
+#define STV090x_OFFST_Px_DVBS1_ENABLE_FIELD	6
+#define STV090x_WIDTH_Px_DVBS1_ENABLE_FIELD	1
+#define STV090x_OFFST_Px_CFR_AUTOSCAN_FIELD	5 /* check */
+#define STV090x_WIDTH_Px_CFR_AUTOSCAN_FIELD	1
+#define STV090x_OFFST_Px_SCAN_ENABLE_FIELD	4 /* check */
+#define STV090x_WIDTH_Px_SCAN_ENABLE_FIELD	1
+#define STV090x_OFFST_Px_TUN_AUTOSCAN_FIELD	3
+#define STV090x_WIDTH_Px_TUN_AUTOSCAN_FIELD	1
+#define STV090x_OFFST_Px_NOFORCE_RELOCK_FIELD	2
+#define STV090x_WIDTH_Px_NOFORCE_RELOCK_FIELD	1
+#define STV090x_OFFST_Px_TUN_RNG_FIELD		0
+#define STV090x_WIDTH_Px_TUN_RNG_FIELD		2
+
+#define STV090x_Px_DMDCFG2(__x)			(0xF415 - (__x - 1) * 0x200)
+#define STV090x_P1_DMDCFG2			STV090x_Px_DMDCFG2(1)
+#define STV090x_P2_DMDCFG2			STV090x_Px_DMDCFG2(2)
+#define STV090x_OFFST_Px_S1S2_SEQUENTIAL_FIELD	6
+#define STV090x_WIDTH_Px_S1S2_SEQUENTIAL_FIELD	1
+
+#define STV090x_Px_DMDISTATE(__x)		(0xF416 - (__x - 1) * 0x200)
+#define STV090x_P1_DMDISTATE			STV090x_Px_DMDISTATE(1)
+#define STV090x_P2_DMDISTATE			STV090x_Px_DMDISTATE(2)
+#define STV090x_OFFST_Px_I2C_DEMOD_MODE_FIELD	0
+#define STV090x_WIDTH_Px_I2C_DEMOD_MODE_FIELD	5
+
+#define STV090x_Px_DMDTOM(__x)			(0xF417 - (__x - 1) * 0x200) /* check */
+#define STV090x_P1_DMDTOM			STV090x_Px_DMDTOM(1)
+#define STV090x_P2_DMDTOM			STV090x_Px_DMDTOM(2)
+
+#define STV090x_Px_DMDSTATE(__x)		(0xF41B - (__x - 1) * 0x200)
+#define STV090x_P1_DMDSTATE			STV090x_Px_DMDSTATE(1)
+#define STV090x_P2_DMDSTATE			STV090x_Px_DMDSTATE(2)
+#define STV090x_OFFST_Px_HEADER_MODE_FIELD	5
+#define STV090x_WIDTH_Px_HEADER_MODE_FIELD	2
+
+#define STV090x_Px_DMDFLYW(__x)			(0xF41C - (__x - 1) * 0x200)
+#define STV090x_P1_DMDFLYW			STV090x_Px_DMDFLYW(1)
+#define STV090x_P2_DMDFLYW			STV090x_Px_DMDFLYW(2)
+#define STV090x_OFFST_Px_I2C_IRQVAL_FIELD	4
+#define STV090x_WIDTH_Px_I2C_IRQVAL_FIELD	4
+#define STV090x_OFFST_Px_FLYWHEEL_CPT_FIELD	0 /* check */
+#define STV090x_WIDTH_Px_FLYWHEEL_CPT_FIELD	4
+
+#define STV090x_Px_DSTATUS3(__x)		(0xF41D - (__x - 1) * 0x200)
+#define STV090x_P1_DSTATUS3			STV090x_Px_DSTATUS3(1)
+#define STV090x_P2_DSTATUS3			STV090x_Px_DSTATUS3(2)
+#define STV090x_OFFST_Px_DEMOD_CFGMODE_FIELD	5
+#define STV090x_WIDTH_Px_DEMOD_CFGMODE_FIELD	2
+
+#define STV090x_Px_DMDCFG3(__x)			(0xF41E - (__x - 1) * 0x200)
+#define STV090x_P1_DMDCFG3			STV090x_Px_DMDCFG3(1)
+#define STV090x_P2_DMDCFG3			STV090x_Px_DMDCFG3(2)
+#define STV090x_OFFST_Px_NOSTOP_FIFOFULL_FIELD	3
+#define STV090x_WIDTH_Px_NOSTOP_FIFOFULL_FIELD	1
+
+#define STV090x_Px_DMDCFG4(__x)			(0xf41f - (__x - 1) * 0x200)
+#define STV090x_P1_DMDCFG4			STV090x_Px_DMDCFG4(1)
+#define STV090x_P2_DMDCFG4			STV090x_Px_DMDCFG4(2)
+
+#define STV090x_Px_CORRELMANT(__x)		(0xF420 - (__x - 1) * 0x200)
+#define STV090x_P1_CORRELMANT			STV090x_Px_CORRELMANT(1)
+#define STV090x_P2_CORRELMANT			STV090x_Px_CORRELMANT(2)
+#define STV090x_OFFST_Px_CORREL_MANT_FIELD	0
+#define STV090x_WIDTH_Px_CORREL_MANT_FIELD	8
+
+#define STV090x_Px_CORRELABS(__x)		(0xF421 - (__x - 1) * 0x200)
+#define STV090x_P1_CORRELABS			STV090x_Px_CORRELABS(1)
+#define STV090x_P2_CORRELABS			STV090x_Px_CORRELABS(2)
+#define STV090x_OFFST_Px_CORREL_ABS_FIELD	0
+#define STV090x_WIDTH_Px_CORREL_ABS_FIELD	8
+
+#define STV090x_Px_CORRELEXP(__x)		(0xF422 - (__x - 1) * 0x200)
+#define STV090x_P1_CORRELEXP			STV090x_Px_CORRELEXP(1)
+#define STV090x_P2_CORRELEXP			STV090x_Px_CORRELEXP(2)
+#define STV090x_OFFST_Px_CORREL_ABSEXP_FIELD	4
+#define STV090x_WIDTH_Px_CORREL_ABSEXP_FIELD	4
+#define STV090x_OFFST_Px_CORREL_EXP_FIELD	0
+#define STV090x_WIDTH_Px_CORREL_EXP_FIELD	4
+
+#define STV090x_Px_PLHMODCOD(__x)		(0xF424 - (__x - 1) * 0x200)
+#define STV090x_P1_PLHMODCOD			STV090x_Px_PLHMODCOD(1)
+#define STV090x_P2_PLHMODCOD			STV090x_Px_PLHMODCOD(2)
+#define STV090x_OFFST_Px_SPECINV_DEMOD_FIELD	7
+#define STV090x_WIDTH_Px_SPECINV_DEMOD_FIELD	1
+#define STV090x_OFFST_Px_PLH_MODCOD_FIELD	2
+#define STV090x_WIDTH_Px_PLH_MODCOD_FIELD	5
+#define STV090x_OFFST_Px_PLH_TYPE_FIELD		0
+#define STV090x_WIDTH_Px_PLH_TYPE_FIELD		2
+
+#define STV090x_Px_AGCK32(__x)			(0xf42b - (__x - 1) * 0x200)
+#define STV090x_P1_AGCK32			STV090x_Px_AGCK32(1)
+#define STV090x_P2_AGCK32			STV090x_Px_AGCK32(2)
+
+#define STV090x_Px_AGC2O(__x)			(0xF42C - (__x - 1) * 0x200)
+#define STV090x_P1_AGC2O			STV090x_Px_AGC2O(1)
+#define STV090x_P2_AGC2O			STV090x_Px_AGC2O(2)
+
+#define STV090x_Px_AGC2REF(__x)			(0xF42D - (__x - 1) * 0x200)
+#define STV090x_P1_AGC2REF			STV090x_Px_AGC2REF(1)
+#define STV090x_P2_AGC2REF			STV090x_Px_AGC2REF(2)
+#define STV090x_OFFST_Px_AGC2_REF_FIELD		0
+#define STV090x_WIDTH_Px_AGC2_REF_FIELD		8
+
+#define STV090x_Px_AGC1ADJ(__x)			(0xF42E - (__x - 1) * 0x200)
+#define STV090x_P1_AGC1ADJ			STV090x_Px_AGC1ADJ(1)
+#define STV090x_P2_AGC1ADJ			STV090x_Px_AGC1ADJ(2)
+#define STV090x_OFFST_Px_AGC1_ADJUSTED_FIELD	0
+#define STV090x_WIDTH_Px_AGC1_ADJUSTED_FIELD	7
+
+#define STV090x_Px_AGC2Iy(__x, __y)		(0xF437 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_AGC2I0			STV090x_Px_AGC2Iy(1, 0)
+#define STV090x_P1_AGC2I1			STV090x_Px_AGC2Iy(1, 1)
+#define STV090x_P2_AGC2I0			STV090x_Px_AGC2Iy(2, 0)
+#define STV090x_P2_AGC2I1			STV090x_Px_AGC2Iy(2, 1)
+#define STV090x_OFFST_Px_AGC2_INTEGRATOR_FIELD	0
+#define STV090x_WIDTH_Px_AGC2_INTEGRATOR_FIELD	8
+
+#define STV090x_Px_CARCFG(__x)			(0xF438 - (__x - 1) * 0x200)
+#define STV090x_P1_CARCFG			STV090x_Px_CARCFG(1)
+#define STV090x_P2_CARCFG			STV090x_Px_CARCFG(2)
+#define STV090x_OFFST_Px_EN_CAR2CENTER_FIELD	5
+#define STV090x_WIDTH_Px_EN_CAR2CENTER_FIELD	1
+#define STV090x_OFFST_Px_ROTATON_FIELD		2
+#define STV090x_WIDTH_Px_ROTATON_FIELD		1
+#define STV090x_OFFST_Px_PH_DET_ALGO_FIELD	0
+#define STV090x_WIDTH_Px_PH_DET_ALGO_FIELD	2
+
+#define STV090x_Px_ACLC(__x)			(0xF439 - (__x - 1) * 0x200)
+#define STV090x_P1_ACLC				STV090x_Px_ACLC(1)
+#define STV090x_P2_ACLC				STV090x_Px_ACLC(2)
+#define STV090x_OFFST_Px_CAR_ALPHA_MANT_FIELD	4
+#define STV090x_WIDTH_Px_CAR_ALPHA_MANT_FIELD	2
+#define STV090x_OFFST_Px_CAR_ALPHA_EXP_FIELD	0
+#define STV090x_WIDTH_Px_CAR_ALPHA_EXP_FIELD	4
+
+#define STV090x_Px_BCLC(__x)			(0xF43A - (__x - 1) * 0x200)
+#define STV090x_P1_BCLC				STV090x_Px_BCLC(1)
+#define STV090x_P2_BCLC				STV090x_Px_BCLC(2)
+#define STV090x_OFFST_Px_CAR_BETA_MANT_FIELD	4
+#define STV090x_WIDTH_Px_CAR_BETA_MANT_FIELD	2
+#define STV090x_OFFST_Px_CAR_BETA_EXP_FIELD	0
+#define STV090x_WIDTH_Px_CAR_BETA_EXP_FIELD	4
+
+#define STV090x_Px_CARFREQ(__x)			(0xF43D - (__x - 1) * 0x200)
+#define STV090x_P1_CARFREQ			STV090x_Px_CARFREQ(1)
+#define STV090x_P2_CARFREQ			STV090x_Px_CARFREQ(2)
+#define STV090x_OFFST_Px_KC_COARSE_EXP_FIELD	4
+#define STV090x_WIDTH_Px_KC_COARSE_EXP_FIELD	4
+#define STV090x_OFFST_Px_BETA_FREQ_FIELD	0
+#define STV090x_WIDTH_Px_BETA_FREQ_FIELD	4
+
+#define STV090x_Px_CARHDR(__x)			(0xF43E - (__x - 1) * 0x200)
+#define STV090x_P1_CARHDR			STV090x_Px_CARHDR(1)
+#define STV090x_P2_CARHDR			STV090x_Px_CARHDR(2)
+#define STV090x_OFFST_Px_FREQ_HDR_FIELD		0
+#define STV090x_WIDTH_Px_FREQ_HDR_FIELD		8
+
+#define STV090x_Px_LDT(__x)			(0xF43F - (__x - 1) * 0x200)
+#define STV090x_P1_LDT				STV090x_Px_LDT(1)
+#define STV090x_P2_LDT				STV090x_Px_LDT(2)
+#define STV090x_OFFST_Px_CARLOCK_THRES_FIELD	0
+#define STV090x_WIDTH_Px_CARLOCK_THRES_FIELD	8
+
+#define STV090x_Px_LDT2(__x)			(0xF440 - (__x - 1) * 0x200)
+#define STV090x_P1_LDT2				STV090x_Px_LDT2(1)
+#define STV090x_P2_LDT2				STV090x_Px_LDT2(2)
+#define STV090x_OFFST_Px_CARLOCK_THRES2_FIELD	0
+#define STV090x_WIDTH_Px_CARLOCK_THRES2_FIELD	8
+
+#define STV090x_Px_CFRICFG(__x)			(0xF441 - (__x - 1) * 0x200)
+#define STV090x_P1_CFRICFG			STV090x_Px_CFRICFG(1)
+#define STV090x_P2_CFRICFG			STV090x_Px_CFRICFG(2)
+#define STV090x_OFFST_Px_NEG_CFRSTEP_FIELD	0
+#define STV090x_WIDTH_Px_NEG_CFRSTEP_FIELD	1
+
+#define STV090x_Pn_CFRUPy(__x, __y)		(0xF443 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_CFRUP0			STV090x_Pn_CFRUPy(1, 0)
+#define STV090x_P1_CFRUP1			STV090x_Pn_CFRUPy(1, 1)
+#define STV090x_P2_CFRUP0			STV090x_Pn_CFRUPy(2, 0)
+#define STV090x_P2_CFRUP1			STV090x_Pn_CFRUPy(2, 1)
+#define STV090x_OFFST_Px_CFR_UP_FIELD		0
+#define STV090x_WIDTH_Px_CFR_UP_FIELD		8
+
+#define STV090x_Pn_CFRLOWy(__x, __y)		(0xF447 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_CFRLOW0			STV090x_Pn_CFRLOWy(1, 0)
+#define STV090x_P1_CFRLOW1			STV090x_Pn_CFRLOWy(1, 1)
+#define STV090x_P2_CFRLOW0			STV090x_Pn_CFRLOWy(2, 0)
+#define STV090x_P2_CFRLOW1			STV090x_Pn_CFRLOWy(2, 1)
+#define STV090x_OFFST_Px_CFR_LOW_FIELD		0
+#define STV090x_WIDTH_Px_CFR_LOW_FIELD		8
+
+#define STV090x_Pn_CFRINITy(__x, __y)		(0xF449 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_CFRINIT0			STV090x_Pn_CFRINITy(1, 0)
+#define STV090x_P1_CFRINIT1			STV090x_Pn_CFRINITy(1, 1)
+#define STV090x_P2_CFRINIT0			STV090x_Pn_CFRINITy(2, 0)
+#define STV090x_P2_CFRINIT1			STV090x_Pn_CFRINITy(2, 1)
+#define STV090x_OFFST_Px_CFR_INIT_FIELD		0
+#define STV090x_WIDTH_Px_CFR_INIT_FIELD		8
+
+#define STV090x_Px_CFRINC1(__x)			(0xF44A - (__x - 1) * 0x200)
+#define STV090x_P1_CFRINC1			STV090x_Px_CFRINC1(1)
+#define STV090x_P2_CFRINC1			STV090x_Px_CFRINC1(2)
+#define STV090x_OFFST_Px_CFR_INC1_FIELD		0
+#define STV090x_WIDTH_Px_CFR_INC1_FIELD		7
+
+#define STV090x_Px_CFRINC0(__x)			(0xF44B - (__x - 1) * 0x200)
+#define STV090x_P1_CFRINC0			STV090x_Px_CFRINC0(1)
+#define STV090x_P2_CFRINC0			STV090x_Px_CFRINC0(2)
+#define STV090x_OFFST_Px_CFR_INC0_FIELD		4
+#define STV090x_WIDTH_Px_CFR_INC0_FIELD		4
+
+#define STV090x_Pn_CFRy(__x, __y)		(0xF44E - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_CFR0				STV090x_Pn_CFRy(1, 0)
+#define STV090x_P1_CFR1				STV090x_Pn_CFRy(1, 1)
+#define STV090x_P1_CFR2				STV090x_Pn_CFRy(1, 2)
+#define STV090x_P2_CFR0				STV090x_Pn_CFRy(2, 0)
+#define STV090x_P2_CFR1				STV090x_Pn_CFRy(2, 1)
+#define STV090x_P2_CFR2				STV090x_Pn_CFRy(2, 2)
+#define STV090x_OFFST_Px_CAR_FREQ_FIELD		0
+#define STV090x_WIDTH_Px_CAR_FREQ_FIELD		8
+
+#define STV090x_Px_LDI(__x)			(0xF44F - (__x - 1) * 0x200)
+#define STV090x_P1_LDI				STV090x_Px_LDI(1)
+#define STV090x_P2_LDI				STV090x_Px_LDI(2)
+#define STV090x_OFFST_Px_LOCK_DET_INTEGR_FIELD	0
+#define STV090x_WIDTH_Px_LOCK_DET_INTEGR_FIELD	8
+
+#define STV090x_Px_TMGCFG(__x)			(0xF450 - (__x - 1) * 0x200)
+#define STV090x_P1_TMGCFG			STV090x_Px_TMGCFG(1)
+#define STV090x_P2_TMGCFG			STV090x_Px_TMGCFG(2)
+#define STV090x_OFFST_Px_TMGLOCK_BETA_FIELD	6
+#define STV090x_WIDTH_Px_TMGLOCK_BETA_FIELD	2
+#define STV090x_OFFST_Px_DO_TIMING_FIELD	4
+#define STV090x_WIDTH_Px_DO_TIMING_FIELD	1
+#define STV090x_OFFST_Px_TMG_MINFREQ_FIELD	0
+#define STV090x_WIDTH_Px_TMG_MINFREQ_FIELD	2
+
+#define STV090x_Px_RTC(__x)			(0xF451 - (__x - 1) * 0x200)
+#define STV090x_P1_RTC				STV090x_Px_RTC(1)
+#define STV090x_P2_RTC				STV090x_Px_RTC(2)
+#define STV090x_OFFST_Px_TMGALPHA_EXP_FIELD	4
+#define STV090x_WIDTH_Px_TMGALPHA_EXP_FIELD	4
+#define STV090x_OFFST_Px_TMGBETA_EXP_FIELD	0
+#define STV090x_WIDTH_Px_TMGBETA_EXP_FIELD	4
+
+#define STV090x_Px_RTCS2(__x)			(0xF452 - (__x - 1) * 0x200)
+#define STV090x_P1_RTCS2			STV090x_Px_RTCS2(1)
+#define STV090x_P2_RTCS2			STV090x_Px_RTCS2(2)
+#define STV090x_OFFST_Px_TMGALPHAS2_EXP_FIELD	4
+#define STV090x_WIDTH_Px_TMGALPHAS2_EXP_FIELD	4
+#define STV090x_OFFST_Px_TMGBETAS2_EXP_FIELD	0
+#define STV090x_WIDTH_Px_TMGBETAS2_EXP_FIELD	4
+
+#define STV090x_Px_TMGTHRISE(__x)		(0xF453 - (__x - 1) * 0x200)
+#define STV090x_P1_TMGTHRISE			STV090x_Px_TMGTHRISE(1)
+#define STV090x_P2_TMGTHRISE			STV090x_Px_TMGTHRISE(2)
+#define STV090x_OFFST_Px_TMGLOCK_THRISE_FIELD	0
+#define STV090x_WIDTH_Px_TMGLOCK_THRISE_FIELD	8
+
+#define STV090x_Px_TMGTHFALL(__x)		(0xF454 - (__x - 1) * 0x200)
+#define STV090x_P1_TMGTHFALL			STV090x_Px_TMGTHFALL(1)
+#define STV090x_P2_TMGTHFALL			STV090x_Px_TMGTHFALL(2)
+#define STV090x_OFFST_Px_TMGLOCK_THFALL_FIELD	0
+#define STV090x_WIDTH_Px_TMGLOCK_THFALL_FIELD	8
+
+#define STV090x_Px_SFRUPRATIO(__x)		(0xF455 - (__x - 1) * 0x200)
+#define STV090x_P1_SFRUPRATIO			STV090x_Px_SFRUPRATIO(1)
+#define STV090x_P2_SFRUPRATIO			STV090x_Px_SFRUPRATIO(2)
+#define STV090x_OFFST_Px_SFR_UPRATIO_FIELD	0
+#define STV090x_WIDTH_Px_SFR_UPRATIO_FIELD	8
+
+#define STV090x_Px_SFRLOWRATIO(__x)		(0xF456 - (__x - 1) * 0x200)
+#define STV090x_P1_SFRLOWRATIO			STV090x_Px_SFRLOWRATIO(1)
+#define STV090x_P2_SFRLOWRATIO			STV090x_Px_SFRLOWRATIO(2)
+#define STV090x_OFFST_Px_SFR_LOWRATIO_FIELD	0
+#define STV090x_WIDTH_Px_SFR_LOWRATIO_FIELD	8
+
+#define STV090x_Px_KREFTMG(__x)			(0xF458 - (__x - 1) * 0x200)
+#define STV090x_P1_KREFTMG			STV090x_Px_KREFTMG(1)
+#define STV090x_P2_KREFTMG			STV090x_Px_KREFTMG(2)
+#define STV090x_OFFST_Px_KREF_TMG_FIELD		0
+#define STV090x_WIDTH_Px_KREF_TMG_FIELD		8
+
+#define STV090x_Px_SFRSTEP(__x)			(0xF459 - (__x - 1) * 0x200)
+#define STV090x_P1_SFRSTEP			STV090x_Px_SFRSTEP(1)
+#define STV090x_P2_SFRSTEP			STV090x_Px_SFRSTEP(2)
+#define STV090x_OFFST_Px_SFR_SCANSTEP_FIELD	4
+#define STV090x_WIDTH_Px_SFR_SCANSTEP_FIELD	4
+#define STV090x_OFFST_Px_SFR_CENTERSTEP_FIELD	0
+#define STV090x_WIDTH_Px_SFR_CENTERSTEP_FIELD	4
+
+#define STV090x_Px_TMGCFG2(__x)			(0xF45A - (__x - 1) * 0x200)
+#define STV090x_P1_TMGCFG2			STV090x_Px_TMGCFG2(1)
+#define STV090x_P2_TMGCFG2			STV090x_Px_TMGCFG2(2)
+#define STV090x_OFFST_Px_SFRRATIO_FINE_FIELD	0
+#define STV090x_WIDTH_Px_SFRRATIO_FINE_FIELD	1
+
+#define STV090x_Px_SFRINIT1(__x)		(0xF45E - (__x - 1) * 0x200)
+#define STV090x_P1_SFRINIT1			STV090x_Px_SFRINIT1(1)
+#define STV090x_P2_SFRINIT1			STV090x_Px_SFRINIT1(2)
+#define STV090x_OFFST_Px_SFR_INIT_FIELD		0
+#define STV090x_WIDTH_Px_SFR_INIT_FIELD		8
+
+#define STV090x_Px_SFRINIT0(__x)		(0xF45F - (__x - 1) * 0x200)
+#define STV090x_P1_SFRINIT0			STV090x_Px_SFRINIT0(1)
+#define STV090x_P2_SFRINIT0			STV090x_Px_SFRINIT0(2)
+#define STV090x_OFFST_Px_SFR_INIT_FIELD		0
+#define STV090x_WIDTH_Px_SFR_INIT_FIELD		8
+
+#define STV090x_Px_SFRUP1(__x)			(0xF460 - (__x - 1) * 0x200)
+#define STV090x_P1_SFRUP1			STV090x_Px_SFRUP1(1)
+#define STV090x_P2_SFRUP1			STV090x_Px_SFRUP1(2)
+#define STV090x_OFFST_Px_SYMB_FREQ_UP1_FIELD	0
+#define STV090x_WIDTH_Px_SYMB_FREQ_UP1_FIELD	7
+
+#define STV090x_Px_SFRUP0(__x)			(0xF461 - (__x - 1) * 0x200)
+#define STV090x_P1_SFRUP0			STV090x_Px_SFRUP0(1)
+#define STV090x_P2_SFRUP0			STV090x_Px_SFRUP0(2)
+#define STV090x_OFFST_Px_SYMB_FREQ_UP0_FIELD	0
+#define STV090x_WIDTH_Px_SYMB_FREQ_UP0_FIELD	8
+
+#define STV090x_Px_SFRLOW1(__x)			(0xF462 - (__x - 1) * 0x200)
+#define STV090x_P1_SFRLOW1			STV090x_Px_SFRLOW1(1)
+#define STV090x_P2_SFRLOW1			STV090x_Px_SFRLOW1(2)
+#define STV090x_OFFST_Px_SYMB_FREQ_LOW1_FIELD	0
+#define STV090x_WIDTH_Px_SYMB_FREQ_LOW1_FIELD	7
+
+#define STV090x_Px_SFRLOW0(__x)			(0xF463 - (__x - 1) * 0x200)
+#define STV090x_P1_SFRLOW0			STV090x_Px_SFRLOW0(1)
+#define STV090x_P2_SFRLOW0			STV090x_Px_SFRLOW0(2)
+#define STV090x_OFFST_Px_SYMB_FREQ_LOW0_FIELD	0
+#define STV090x_WIDTH_Px_SYMB_FREQ_LOW0_FIELD	8
+
+#define STV090x_Px_SFRy(__x, __y)		(0xF464 - (__x-1) * 0x200 + (3 - __y))
+#define STV090x_P1_SFR0				STV090x_Px_SFRy(1, 0)
+#define STV090x_P1_SFR1				STV090x_Px_SFRy(1, 1)
+#define STV090x_P1_SFR2				STV090x_Px_SFRy(1, 2)
+#define STV090x_P1_SFR3				STV090x_Px_SFRy(1, 3)
+#define STV090x_P2_SFR0				STV090x_Px_SFRy(2, 0)
+#define STV090x_P2_SFR1				STV090x_Px_SFRy(2, 1)
+#define STV090x_P2_SFR2				STV090x_Px_SFRy(2, 2)
+#define STV090x_P2_SFR3				STV090x_Px_SFRy(2, 3)
+#define STV090x_OFFST_Px_SYMB_FREQ_FIELD	0
+#define STV090x_WIDTH_Px_SYMB_FREQ_FIELD	32
+
+#define STV090x_Px_TMGREG2(__x)			(0xF468 - (__x - 1) * 0x200)
+#define STV090x_P1_TMGREG2			STV090x_Px_TMGREG2(1)
+#define STV090x_P2_TMGREG2			STV090x_Px_TMGREG2(2)
+#define STV090x_OFFST_Px_TMGREG_FIELD		0
+#define STV090x_WIDTH_Px_TMGREG_FIELD		8
+
+#define STV090x_Px_TMGREG1(__x)			(0xF469 - (__x - 1) * 0x200)
+#define STV090x_P1_TMGREG1			STV090x_Px_TMGREG1(1)
+#define STV090x_P2_TMGREG1				STV090x_Px_TMGREG1(2)
+#define STV090x_OFFST_Px_TMGREG_FIELD		0
+#define STV090x_WIDTH_Px_TMGREG_FIELD		8
+
+#define STV090x_Px_TMGREG0(__x)			(0xF46A - (__x - 1) * 0x200)
+#define STV090x_P1_TMGREG0			STV090x_Px_TMGREG0(1)
+#define STV090x_P2_TMGREG0			STV090x_Px_TMGREG0(2)
+#define STV090x_OFFST_Px_TMGREG_FIELD		0
+#define STV090x_WIDTH_Px_TMGREG_FIELD		8
+
+#define STV090x_Px_TMGLOCKy(__x, __y)		(0xF46C - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_TMGLOCK0			STV090x_Px_TMGLOCKy(1, 0)
+#define STV090x_P1_TMGLOCK1			STV090x_Px_TMGLOCKy(1, 1)
+#define STV090x_P2_TMGLOCK0			STV090x_Px_TMGLOCKy(2, 0)
+#define STV090x_P2_TMGLOCK1			STV090x_Px_TMGLOCKy(2, 1)
+#define STV090x_OFFST_Px_TMGLOCK_LEVEL_FIELD	0
+#define STV090x_WIDTH_Px_TMGLOCK_LEVEL_FIELD	8
+
+#define STV090x_Px_TMGOBS(__x)			(0xF46D - (__x - 1) * 0x200)
+#define STV090x_P1_TMGOBS			STV090x_Px_TMGOBS(1)
+#define STV090x_P2_TMGOBS			STV090x_Px_TMGOBS(2)
+#define STV090x_OFFST_Px_ROLLOFF_STATUS_FIELD	6
+#define STV090x_WIDTH_Px_ROLLOFF_STATUS_FIELD	2
+
+#define STV090x_Px_EQUALCFG(__x)		(0xF46F - (__x - 1) * 0x200)
+#define STV090x_P1_EQUALCFG			STV090x_Px_EQUALCFG(1)
+#define STV090x_P2_EQUALCFG			STV090x_Px_EQUALCFG(2)
+#define STV090x_OFFST_Px_EQUAL_ON_FIELD		6
+#define STV090x_WIDTH_Px_EQUAL_ON_FIELD		1
+#define STV090x_OFFST_Px_MU_EQUALDFE_FIELD	0
+#define STV090x_WIDTH_Px_MU_EQUALDFE_FIELD	3
+
+#define STV090x_Px_EQUAIy(__x, __y)		(0xf470 - (__x - 1) * 0x200 + (__y - 1))
+#define STV090x_P1_EQUAI1			STV090x_Px_EQUAIy(1, 1)
+#define STV090x_P1_EQUAI2			STV090x_Px_EQUAIy(1, 2)
+#define STV090x_P1_EQUAI3			STV090x_Px_EQUAIy(1, 3)
+#define STV090x_P1_EQUAI4			STV090x_Px_EQUAIy(1, 4)
+#define STV090x_P1_EQUAI5			STV090x_Px_EQUAIy(1, 5)
+#define STV090x_P1_EQUAI6			STV090x_Px_EQUAIy(1, 6)
+#define STV090x_P1_EQUAI7			STV090x_Px_EQUAIy(1, 7)
+#define STV090x_P1_EQUAI8			STV090x_Px_EQUAIy(1, 8)
+
+#define STV090x_P2_EQUAI1			STV090x_Px_EQUAIy(2, 1)
+#define STV090x_P2_EQUAI2			STV090x_Px_EQUAIy(2, 2)
+#define STV090x_P2_EQUAI3			STV090x_Px_EQUAIy(2, 3)
+#define STV090x_P2_EQUAI4			STV090x_Px_EQUAIy(2, 4)
+#define STV090x_P2_EQUAI5			STV090x_Px_EQUAIy(2, 5)
+#define STV090x_P2_EQUAI6			STV090x_Px_EQUAIy(2, 6)
+#define STV090x_P2_EQUAI7			STV090x_Px_EQUAIy(2, 7)
+#define STV090x_P2_EQUAI8			STV090x_Px_EQUAIy(2, 8)
+#define STV090x_OFFST_Px_EQUA_ACCIy_FIELD	0
+#define STV090x_WIDTH_Px_EQUA_ACCIy_FIELD	8
+
+#define STV090x_Px_EQUAQy(__x, __y)		(0xf471 - (__x - 1) * 0x200 + (__y - 1))
+#define STV090x_P1_EQUAQ1			STV090x_Px_EQUAQy(1, 1)
+#define STV090x_P1_EQUAQ2			STV090x_Px_EQUAQy(1, 2)
+#define STV090x_P1_EQUAQ3			STV090x_Px_EQUAQy(1, 3)
+#define STV090x_P1_EQUAQ4			STV090x_Px_EQUAQy(1, 4)
+#define STV090x_P1_EQUAQ5			STV090x_Px_EQUAQy(1, 5)
+#define STV090x_P1_EQUAQ6			STV090x_Px_EQUAQy(1, 6)
+#define STV090x_P1_EQUAQ7			STV090x_Px_EQUAQy(1, 7)
+#define STV090x_P1_EQUAQ8			STV090x_Px_EQUAQy(1, 8)
+
+#define STV090x_P2_EQUAQ1			STV090x_Px_EQUAQy(2, 1)
+#define STV090x_P2_EQUAQ2			STV090x_Px_EQUAQy(2, 2)
+#define STV090x_P2_EQUAQ3			STV090x_Px_EQUAQy(2, 3)
+#define STV090x_P2_EQUAQ4			STV090x_Px_EQUAQy(2, 4)
+#define STV090x_P2_EQUAQ5			STV090x_Px_EQUAQy(2, 5)
+#define STV090x_P2_EQUAQ6			STV090x_Px_EQUAQy(2, 6)
+#define STV090x_P2_EQUAQ7			STV090x_Px_EQUAQy(2, 7)
+#define STV090x_P2_EQUAQ8			STV090x_Px_EQUAQy(2, 8)
+#define STV090x_OFFST_Px_EQUA_ACCQy_FIELD	0
+#define STV090x_WIDTH_Px_EQUA_ACCQy_FIELD	8
+
+#define STV090x_Px_NNOSDATATy(__x, __y)		(0xf481 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_NNOSDATAT0			STV090x_Px_NNOSDATATy(1, 0)
+#define STV090x_P1_NNOSDATAT1			STV090x_Px_NNOSDATATy(1, 1)
+#define STV090x_P2_NNOSDATAT0			STV090x_Px_NNOSDATATy(2, 0)
+#define STV090x_P2_NNOSDATAT1			STV090x_Px_NNOSDATATy(2, 1)
+#define STV090x_OFFST_Px_NOSDATAT_NORMED_FIELD	0
+#define STV090x_WIDTH_Px_NOSDATAT_NORMED_FIELD	8
+
+#define STV090x_Px_NNOSDATAy(__x, __y)		(0xf483 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_NNOSDATA0			STV090x_Px_NNOSDATAy(1, 0)
+#define STV090x_P1_NNOSDATA1			STV090x_Px_NNOSDATAy(1, 1)
+#define STV090x_P2_NNOSDATA0			STV090x_Px_NNOSDATAy(2, 0)
+#define STV090x_P2_NNOSDATA1			STV090x_Px_NNOSDATAy(2, 1)
+#define STV090x_OFFST_Px_NOSDATA_NORMED_FIELD	0
+#define STV090x_WIDTH_Px_NOSDATA_NORMED_FIELD	8
+
+#define STV090x_Px_NNOSPLHTy(__x, __y)		(0xf485 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_NNOSPLHT0			STV090x_Px_NNOSPLHTy(1, 0)
+#define STV090x_P1_NNOSPLHT1			STV090x_Px_NNOSPLHTy(1, 1)
+#define STV090x_P2_NNOSPLHT0			STV090x_Px_NNOSPLHTy(2, 0)
+#define STV090x_P2_NNOSPLHT1			STV090x_Px_NNOSPLHTy(2, 1)
+#define STV090x_OFFST_Px_NOSPLHT_NORMED_FIELD	0
+#define STV090x_WIDTH_Px_NOSPLHT_NORMED_FIELD	8
+
+#define STV090x_Px_NNOSPLHy(__x, __y)		(0xf487 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_NNOSPLH0			STV090x_Px_NNOSPLHy(1, 0)
+#define STV090x_P1_NNOSPLH1			STV090x_Px_NNOSPLHy(1, 1)
+#define STV090x_P2_NNOSPLH0			STV090x_Px_NNOSPLHy(2, 0)
+#define STV090x_P2_NNOSPLH1			STV090x_Px_NNOSPLHy(2, 1)
+#define STV090x_OFFST_Px_NOSPLH_NORMED_FIELD	0
+#define STV090x_WIDTH_Px_NOSPLH_NORMED_FIELD	8
+
+#define STV090x_Px_NOSDATATy(__x, __y)			(0xf489 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_NOSDATAT0				STV090x_Px_NOSDATATy(1, 0)
+#define STV090x_P1_NOSDATAT1				STV090x_Px_NOSDATATy(1, 1)
+#define STV090x_P2_NOSDATAT0				STV090x_Px_NOSDATATy(2, 0)
+#define STV090x_P2_NOSDATAT1				STV090x_Px_NOSDATATy(2, 1)
+#define STV090x_OFFST_Px_NOSDATAT_UNNORMED_FIELD	0
+#define STV090x_WIDTH_Px_NOSDATAT_UNNORMED_FIELD	8
+
+#define STV090x_Px_NOSDATAy(__x, __y)		(0xf48b - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_NOSDATA0			STV090x_Px_NOSDATAy(1, 0)
+#define STV090x_P1_NOSDATA1			STV090x_Px_NOSDATAy(1, 1)
+#define STV090x_P2_NOSDATA0			STV090x_Px_NOSDATAy(2, 0)
+#define STV090x_P2_NOSDATA1			STV090x_Px_NOSDATAy(2, 1)
+#define STV090x_OFFST_Px_NOSDATA_UNNORMED_FIELD	0
+#define STV090x_WIDTH_Px_NOSDATA_UNNORMED_FIELD	8
+
+#define STV090x_Px_NOSPLHTy(__x, __y)		(0xf48d - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_NOSPLHT0			STV090x_Px_NOSPLHTy(1, 0)
+#define STV090x_P1_NOSPLHT1			STV090x_Px_NOSPLHTy(1, 1)
+#define STV090x_P2_NOSPLHT0			STV090x_Px_NOSPLHTy(2, 0)
+#define STV090x_P2_NOSPLHT1			STV090x_Px_NOSPLHTy(2, 1)
+#define STV090x_OFFST_Px_NOSPLHT_UNNORMED_FIELD	0
+#define STV090x_WIDTH_Px_NOSPLHT_UNNORMED_FIELD	8
+
+#define STV090x_Px_NOSPLHy(__x, __y)		(0xf48f - (__x - 1) * 0x200 - __y * 0x1)
+#define STv090x_P1_NOSPLH0			STV090x_Px_NOSPLHy(1, 0)
+#define STv090x_P1_NOSPLH1			STV090x_Px_NOSPLHy(1, 1)
+#define STv090x_P2_NOSPLH0			STV090x_Px_NOSPLHy(2, 0)
+#define STv090x_P2_NOSPLH1			STV090x_Px_NOSPLHy(2, 1)
+#define STV090x_OFFST_Px_NOSPLH_UNNORMED_FIELD	0
+#define STV090x_WIDTH_Px_NOSPLH_UNNORMED_FIELD	8
+
+#define STV090x_Px_CAR2CFG(__x)			(0xf490 - (__x - 1) * 0x200)
+#define STV090x_P1_CAR2CFG			STV090x_Px_CAR2CFG(1)
+#define STV090x_P2_CAR2CFG			STV090x_Px_CAR2CFG(2)
+#define STV090x_OFFST_Px_PN4_SELECT_FIELD	6
+#define STV090x_WIDTH_Px_PN4_SELECT_FIELD	1
+#define STV090x_OFFST_Px_CFR2_STOPDVBS1_FIELD	5
+#define STV090x_WIDTH_Px_CFR2_STOPDVBS1_FIELD	1
+#define STV090x_OFFST_Px_ROTA2ON_FIELD		2
+#define STV090x_WIDTH_Px_ROTA2ON_FIELD		1
+#define STV090x_OFFST_Px_PH_DET_ALGO2_FIELD	0
+#define STV090x_WIDTH_Px_PH_DET_ALGO2_FIELD	2
+
+#define STV090x_Px_ACLC2(__x)			(0xf491 - (__x - 1) * 0x200)
+#define STV090x_P1_ACLC2			STV090x_Px_ACLC2(1)
+#define STV090x_P2_ACLC2			STV090x_Px_ACLC2(2)
+#define STV090x_OFFST_Px_CAR2_ALPHA_MANT_FIELD	4
+#define STV090x_WIDTH_Px_CAR2_ALPHA_MANT_FIELD	2
+#define STV090x_OFFST_Px_CAR2_ALPHA_EXP_FIELD	0
+#define STV090x_WIDTH_Px_CAR2_ALPHA_EXP_FIELD	4
+
+#define STV090x_Px_BCLC2(__x)			(0xf492 - (__x - 1) * 0x200)
+#define STV090x_P1_BCLC2			STV090x_Px_BCLC2(1)
+#define STV090x_P2_BCLC2			STV090x_Px_BCLC2(2)
+#define STV090x_OFFST_Px_CAR2_BETA_MANT_FIELD	4
+#define STV090x_WIDTH_Px_CAR2_BETA_MANT_FIELD	2
+#define STV090x_OFFST_Px_CAR2_BETA_EXP_FIELD	0
+#define STV090x_WIDTH_Px_CAR2_BETA_EXP_FIELD	4
+
+#define STV090x_Px_ACLC2S2Q(__x)		(0xf497 - (__x - 1) * 0x200)
+#define STV090x_P1_ACLC2S2Q			STV090x_Px_ACLC2S2Q(1)
+#define STV090x_P2_ACLC2S2Q			STV090x_Px_ACLC2S2Q(2)
+#define STV090x_OFFST_Px_ENAB_SPSKSYMB_FIELD	7
+#define STV090x_WIDTH_Px_ENAB_SPSKSYMB_FIELD	1
+#define STV090x_OFFST_Px_CAR2S2_Q_ALPH_M_FIELD	4
+#define STV090x_WIDTH_Px_CAR2S2_Q_ALPH_M_FIELD	2
+#define STV090x_OFFST_Px_CAR2S2_Q_ALPH_E_FIELD	0
+#define STV090x_WIDTH_Px_CAR2S2_Q_ALPH_E_FIELD	4
+
+#define STV090x_Px_ACLC2S28(__x)		(0xf498 - (__x - 1) * 0x200)
+#define STV090x_P1_ACLC2S28			STV090x_Px_ACLC2S28(1)
+#define STV090x_P2_ACLC2S28			STV090x_Px_ACLC2S28(2)
+#define STV090x_OFFST_Px_CAR2S2_8_ALPH_M_FIELD	4
+#define STV090x_WIDTH_Px_CAR2S2_8_ALPH_M_FIELD	2
+#define STV090x_OFFST_Px_CAR2S2_8_ALPH_E_FIELD	0
+#define STV090x_WIDTH_Px_CAR2S2_8_ALPH_E_FIELD	4
+
+#define STV090x_Px_ACLC2S216A(__x)		(0xf499 - (__x - 1) * 0x200)
+#define STV090x_P1_ACLC2S216A			STV090x_Px_ACLC2S216A(1)
+#define STV090x_P2_ACLC2S216A			STV090x_Px_ACLC2S216A(2)
+#define STV090x_OFFST_Px_CAR2S2_16A_ALPH_M_FIELD	4
+#define STV090x_WIDTH_Px_CAR2S2_16A_ALPH_M_FIELD	2
+#define STV090x_OFFST_Px_CAR2S2_16A_ALPH_E_FIELD	0
+#define STV090x_WIDTH_Px_CAR2S2_16A_ALPH_E_FIELD	4
+
+#define STV090x_Px_ACLC2S232A(__x)		(0xf499 - (__x - 1) * 0x200)
+#define STV090x_P1_ACLC2S232A			STV090x_Px_ACLC2S232A(1)
+#define STV090x_P2_ACLC2S232A			STV090x_Px_ACLC2S232A(2)
+#define STV090x_OFFST_Px_CAR2S2_32A_ALPH_M_FIELD	4
+#define STV090x_WIDTH_Px_CAR2S2_32A_ALPH_M_FIELD	2
+#define STV090x_OFFST_Px_CAR2S2_32A_ALPH_E_FIELD	0
+#define STV090x_WIDTH_Px_CAR2S2_32A_ALPH_E_FIELD	4
+
+#define STV090x_Px_BCLC2S2Q(__x)		(0xf49c - (__x - 1) * 0x200)
+#define STV090x_P1_BCLC2S2Q			STV090x_Px_BCLC2S2Q(1)
+#define STV090x_P2_BCLC2S2Q			STV090x_Px_BCLC2S2Q(2)
+#define STV090x_OFFST_Px_CAR2S2_Q_BETA_M_FIELD	4
+#define STV090x_WIDTH_Px_CAR2S2_Q_BETA_M_FIELD	2
+#define STV090x_OFFST_Px_CAR2S2_Q_BETA_E_FIELD	0
+#define STV090x_WIDTH_Px_CAR2S2_Q_BETA_E_FIELD	4
+
+#define STV090x_Px_BCLC2S28(__x)		(0xf49d - (__x - 1) * 0x200)
+#define STV090x_P1_BCLC2S28			STV090x_Px_BCLC2S28(1)
+#define STV090x_P2_BCLC2S28			STV090x_Px_BCLC2S28(1)
+#define STV090x_OFFST_Px_CAR2S2_8_BETA_M_FIELD	4
+#define STV090x_WIDTH_Px_CAR2S2_8_BETA_M_FIELD	2
+#define STV090x_OFFST_Px_CAR2S2_8_BETA_E_FIELD	0
+#define STV090x_WIDTH_Px_CAR2S2_8_BETA_E_FIELD	4
+
+#define STV090x_Px_BCLC2S216A(__x)		(0xf49d - (__x - 1) * 0x200)
+#define STV090x_P1_BCLC2S216A			STV090x_Px_BCLC2S216A(1)
+#define STV090x_P2_BCLC2S216A			STV090x_Px_BCLC2S216A(1)
+#define STV090x_OFFST_Px_CAR2S2_16A_BETA_M_FIELD	4
+#define STV090x_WIDTH_Px_CAR2S2_16A_BETA_M_FIELD	2
+#define STV090x_OFFST_Px_CAR2S2_16A_BETA_E_FIELD	0
+#define STV090x_WIDTH_Px_CAR2S2_16A_BETA_E_FIELD	4
+
+#define STV090x_Px_BCLC2S232A(__x)		(0xf49d - (__x - 1) * 0x200)
+#define STV090x_P1_BCLC2S232A			STV090x_Px_BCLC2S232A(1)
+#define STV090x_P2_BCLC2S232A			STV090x_Px_BCLC2S232A(1)
+#define STV090x_OFFST_Px_CAR2S2_32A_BETA_M_FIELD	4
+#define STV090x_WIDTH_Px_CAR2S2_32A_BETA_M_FIELD	2
+#define STV090x_OFFST_Px_CAR2S2_32A_BETA_E_FIELD	0
+#define STV090x_WIDTH_Px_CAR2S2_32A_BETA_E_FIELD	4
+
+#define STV090x_Px_PLROOT2(__x)			(0xf4ac - (__x - 1) * 0x200)
+#define STV090x_P1_PLROOT2			STV090x_Px_PLROOT2(1)
+#define STV090x_P2_PLROOT2			STV090x_Px_PLROOT2(2)
+#define STV090x_OFFST_Px_PLSCRAMB_MODE_FIELD	2
+#define STV090x_WIDTH_Px_PLSCRAMB_MODE_FIELD	2
+#define STV090x_OFFST_Px_PLSCRAMB_ROOT_FIELD	0
+#define STV090x_WIDTH_Px_PLSCRAMB_ROOT_FIELD	2
+
+#define STV090x_Px_PLROOT1(__x)			(0xf4ad - (__x - 1) * 0x200)
+#define STV090x_P1_PLROOT1			STV090x_Px_PLROOT1(1)
+#define STV090x_P2_PLROOT1			STV090x_Px_PLROOT1(2)
+#define STV090x_OFFST_Px_PLSCRAMB_ROOT1_FIELD	0
+#define STV090x_WIDTH_Px_PLSCRAMB_ROOT1_FIELD	8
+
+#define STV090x_Px_PLROOT0(__x)			(0xf4ae - (__x - 1) * 0x200)
+#define STV090x_P1_PLROOT0			STV090x_Px_PLROOT0(1)
+#define STV090x_P2_PLROOT0			STV090x_Px_PLROOT0(2)
+#define STV090x_OFFST_Px_PLSCRAMB_ROOT0_FIELD	0
+#define STV090x_WIDTH_Px_PLSCRAMB_ROOT0_FIELD	8
+
+#define STV090x_Px_MODCODLST0(__x)		(0xf4b0 - (__x - 1) * 0x200) /* check */
+#define STV090x_P1_MODCODLST0			STV090x_Px_MODCODLST0(1)
+#define STV090x_P2_MODCODLST0			STV090x_Px_MODCODLST0(2)
+
+#define STV090x_Px_MODCODLST1(__x)		(0xf4b1 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST1			STV090x_Px_MODCODLST1(1)
+#define STV090x_P2_MODCODLST1			STV090x_Px_MODCODLST1(2)
+#define STV090x_OFFST_Px_DIS_MODCOD29_FIELD	4
+#define STV090x_WIDTH_Px_DIS_MODCOD29T_FIELD	4
+#define STV090x_OFFST_Px_DIS_32PSK_9_10_FIELD	0
+#define STV090x_WIDTH_Px_DIS_32PSK_9_10_FIELD	4
+
+#define STV090x_Px_MODCODLST2(__x)		(0xf4b2 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST2			STV090x_Px_MODCODLST2(1)
+#define STV090x_P2_MODCODLST2			STV090x_Px_MODCODLST2(2)
+#define STV090x_OFFST_Px_DIS_32PSK_8_9_FIELD	4
+#define STV090x_WIDTH_Px_DIS_32PSK_8_9_FIELD	4
+#define STV090x_OFFST_Px_DIS_32PSK_5_6_FIELD	0
+#define STV090x_WIDTH_Px_DIS_32PSK_5_6_FIELD	4
+
+#define STV090x_Px_MODCODLST3(__x)		(0xf4b3 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST3			STV090x_Px_MODCODLST3(1)
+#define STV090x_P2_MODCODLST3			STV090x_Px_MODCODLST3(2)
+#define STV090x_OFFST_Px_DIS_32PSK_4_5_FIELD	4
+#define STV090x_WIDTH_Px_DIS_32PSK_4_5_FIELD	4
+#define STV090x_OFFST_Px_DIS_32PSK_3_4_FIELD	0
+#define STV090x_WIDTH_Px_DIS_32PSK_3_4_FIELD	4
+
+#define STV090x_Px_MODCODLST4(__x)		(0xf4b4 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST4			STV090x_Px_MODCODLST4(1)
+#define STV090x_P2_MODCODLST4			STV090x_Px_MODCODLST4(2)
+#define STV090x_OFFST_Px_DIS_16PSK_9_10_FIELD	4
+#define STV090x_WIDTH_Px_DIS_16PSK_9_10_FIELD	4
+#define STV090x_OFFST_Px_DIS_16PSK_8_9_FIELD	0
+#define STV090x_WIDTH_Px_DIS_16PSK_8_9_FIELD	4
+
+#define STV090x_Px_MODCODLST5(__x)		(0xf4b5 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST5			STV090x_Px_MODCODLST5(1)
+#define STV090x_P2_MODCODLST5			STV090x_Px_MODCODLST5(2)
+#define STV090x_OFFST_Px_DIS_16PSK_5_6_FIELD	4
+#define STV090x_WIDTH_Px_DIS_16PSK_5_6_FIELD	4
+#define STV090x_OFFST_Px_DIS_16PSK_4_5_FIELD	0
+#define STV090x_WIDTH_Px_DIS_16PSK_4_5_FIELD	4
+
+#define STV090x_Px_MODCODLST6(__x)		(0xf4b6 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST6			STV090x_Px_MODCODLST6(1)
+#define STV090x_P2_MODCODLST6			STV090x_Px_MODCODLST6(2)
+#define STV090x_OFFST_Px_DIS_16PSK_3_4_FIELD	4
+#define STV090x_WIDTH_Px_DIS_16PSK_3_4_FIELD	4
+#define STV090x_OFFST_Px_DIS_16PSK_2_3_FIELD	0
+#define STV090x_WIDTH_Px_DIS_16PSK_2_3_FIELD	4
+
+#define STV090x_Px_MODCODLST7(__x)		(0xf4b7 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST7			STV090x_Px_MODCODLST7(1)
+#define STV090x_P2_MODCODLST7			STV090x_Px_MODCODLST7(2)
+#define STV090x_OFFST_Px_DIS_8P_9_10_FIELD	4
+#define STV090x_WIDTH_Px_DIS_8P_9_10_FIELD	4
+#define STV090x_OFFST_Px_DIS_8P_8_9_FIELD	0
+#define STV090x_WIDTH_Px_DIS_8P_8_9_FIELD	4
+
+#define STV090x_Px_MODCODLST8(__x)		(0xf4b8 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST8			STV090x_Px_MODCODLST8(1)
+#define STV090x_P2_MODCODLST8			STV090x_Px_MODCODLST8(2)
+#define STV090x_OFFST_Px_DIS_8P_5_6_FIELD	4
+#define STV090x_WIDTH_Px_DIS_8P_5_6_FIELD	4
+#define STV090x_OFFST_Px_DIS_8P_3_4_FIELD	0
+#define STV090x_WIDTH_Px_DIS_8P_3_4_FIELD	4
+
+#define STV090x_Px_MODCODLST9(__x)		(0xf4b9 - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLST9			STV090x_Px_MODCODLST9(1)
+#define STV090x_P2_MODCODLST9			STV090x_Px_MODCODLST9(2)
+#define STV090x_OFFST_Px_DIS_8P_2_3_FIELD	4
+#define STV090x_WIDTH_Px_DIS_8P_2_3_FIELD	4
+#define STV090x_OFFST_Px_DIS_8P_3_5_FIELD	0
+#define STV090x_WIDTH_Px_DIS_8P_3_5_FIELD	4
+
+#define STV090x_Px_MODCODLSTA(__x)		(0xf4ba - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLSTA			STV090x_Px_MODCODLSTA(1)
+#define STV090x_P2_MODCODLSTA			STV090x_Px_MODCODLSTA(2)
+#define STV090x_OFFST_Px_DIS_QP_9_10_FIELD	4
+#define STV090x_WIDTH_Px_DIS_QP_9_10_FIELD	4
+#define STV090x_OFFST_Px_DIS_QP_8_9_FIELD	0
+#define STV090x_WIDTH_Px_DIS_QP_8_9_FIELD	4
+
+#define STV090x_Px_MODCODLSTB(__x)		(0xf4bb - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLSTB			STV090x_Px_MODCODLSTB(1)
+#define STV090x_P2_MODCODLSTB			STV090x_Px_MODCODLSTB(2)
+#define STV090x_OFFST_Px_DIS_QP_5_6_FIELD	4
+#define STV090x_WIDTH_Px_DIS_QP_5_6_FIELD	4
+#define STV090x_OFFST_Px_DIS_QP_4_5_FIELD	0
+#define STV090x_WIDTH_Px_DIS_QP_4_5_FIELD	4
+
+#define STV090x_Px_MODCODLSTC(__x)		(0xf4bc - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLSTC			STV090x_Px_MODCODLSTC(1)
+#define STV090x_P2_MODCODLSTC			STV090x_Px_MODCODLSTC(2)
+#define STV090x_OFFST_Px_DIS_QP_3_4_FIELD	4
+#define STV090x_WIDTH_Px_DIS_QP_3_4_FIELD	4
+#define STV090x_OFFST_Px_DIS_QP_2_3_FIELD	0
+#define STV090x_WIDTH_Px_DIS_QP_2_3_FIELD	4
+
+#define STV090x_Px_MODCODLSTD(__x)		(0xf4bd - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLSTD			STV090x_Px_MODCODLSTD(1)
+#define STV090x_P2_MODCODLSTD			STV090x_Px_MODCODLSTD(2)
+#define STV090x_OFFST_Px_DIS_QP_3_5_FIELD	4
+#define STV090x_WIDTH_Px_DIS_QP_3_5_FIELD	4
+#define STV090x_OFFST_Px_DIS_QP_1_2_FIELD	0
+#define STV090x_WIDTH_Px_DIS_QP_1_2_FIELD	4
+
+#define STV090x_Px_MODCODLSTE(__x)		(0xf4be - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLSTE			STV090x_Px_MODCODLSTE(1)
+#define STV090x_P2_MODCODLSTE			STV090x_Px_MODCODLSTE(2)
+#define STV090x_OFFST_Px_DIS_QP_2_5_FIELD	4
+#define STV090x_WIDTH_Px_DIS_QP_2_5_FIELD	4
+#define STV090x_OFFST_Px_DIS_QP_1_3_FIELD	0
+#define STV090x_WIDTH_Px_DIS_QP_1_3_FIELD	4
+
+#define STV090x_Px_MODCODLSTF(__x)		(0xf4bf - (__x - 1) * 0x200)
+#define STV090x_P1_MODCODLSTF			STV090x_Px_MODCODLSTF(1)
+#define STV090x_P2_MODCODLSTF			STV090x_Px_MODCODLSTF(2)
+#define STV090x_OFFST_Px_DIS_QP_1_4_FIELD	4
+#define STV090x_WIDTH_Px_DIS_QP_1_4_FIELD	4
+
+#define STV090x_Px_GAUSSR0(__x)			(0xf4c0 - (__x - 1) * 0x200)
+#define STV090x_P1_GAUSSR0			STV090x_Px_GAUSSR0(1)
+#define STV090x_P2_GAUSSR0			STV090x_Px_GAUSSR0(2)
+#define STV090x_OFFST_Px_EN_CCIMODE_FIELD	7
+#define STV090x_WIDTH_Px_EN_CCIMODE_FIELD	1
+#define STV090x_OFFST_Px_R0_GAUSSIEN_FIELD	0
+#define STV090x_WIDTH_Px_R0_GAUSSIEN_FIELD	7
+
+#define STV090x_Px_CCIR0(__x)			(0xf4c1 - (__x - 1) * 0x200)
+#define STV090x_P1_CCIR0			STV090x_Px_CCIR0(1)
+#define STV090x_P2_CCIR0			STV090x_Px_CCIR0(2)
+#define STV090x_OFFST_Px_CCIDETECT_PLH_FIELD	7
+#define STV090x_WIDTH_Px_CCIDETECT_PLH_FIELD	1
+#define STV090x_OFFST_Px_R0_CCI_FIELD		0
+#define STV090x_WIDTH_Px_R0_CCI_FIELD		7
+
+#define STV090x_Px_CCIQUANT(__x)		(0xf4c2 - (__x - 1) * 0x200)
+#define STV090x_P1_CCIQUANT			STV090x_Px_CCIQUANT(1)
+#define STV090x_P2_CCIQUANT			STV090x_Px_CCIQUANT(2)
+#define STV090x_OFFST_Px_CCI_BETA_FIELD		5
+#define STV090x_WIDTH_Px_CCI_BETA_FIELD		3
+#define STV090x_OFFST_Px_CCI_QUANT_FIELD	0
+#define STV090x_WIDTH_Px_CCI_QUANT_FIELD	5
+
+#define STV090x_Px_CCITHRESH(__x)		(0xf4c3 - (__x - 1) * 0x200)
+#define STV090x_P1_CCITHRESH			STV090x_Px_CCITHRESH(1)
+#define STV090x_P2_CCITHRESH			STV090x_Px_CCITHRESH(2)
+#define STV090x_OFFST_Px_CCI_THRESHOLD_FIELD	0
+#define STV090x_WIDTH_Px_CCI_THRESHOLD_FIELD	8
+
+#define STV090x_Px_CCIACC(__x)			(0xf4c4 - (__x - 1) * 0x200)
+#define STV090x_P1_CCIACC			STV090x_Px_CCIACC(1)
+#define STV090x_P2_CCIACC			STV090x_Px_CCIACC(1)
+#define STV090x_OFFST_Px_CCI_VALUE_FIELD	0
+#define STV090x_WIDTH_Px_CCI_VALUE_FIELD	8
+
+#define STV090x_Px_DMDRESCFG(__x)		(0xF4C6 - (__x - 1) * 0x200)
+#define STV090x_P1_DMDRESCFG			STV090x_Px_DMDRESCFG(1)
+#define STV090x_P2_DMDRESCFG			STV090x_Px_DMDRESCFG(2)
+#define STV090x_OFFST_Px_DMDRES_RESET_FIELD	7
+#define STV090x_WIDTH_Px_DMDRES_RESET_FIELD	1
+
+#define STV090x_Px_DMDRESADR(__x)		(0xF4C7 - (__x - 1) * 0x200)
+#define STV090x_P1_DMDRESADR			STV090x_Px_DMDRESADR(1)
+#define STV090x_P2_DMDRESADR			STV090x_Px_DMDRESADR(2)
+#define STV090x_OFFST_Px_DMDRES_RESNBR_FIELD	0
+#define STV090x_WIDTH_Px_DMDRES_RESNBR_FIELD	4
+
+#define STV090x_Px_DMDRESDATAy(__x, __y)	(0xF4C8 - (__x - 1) * 0x200 + (7 - __y))
+#define STV090x_P1_DMDRESDATA0			STV090x_Px_DMDRESDATAy(1, 0)
+#define STV090x_P1_DMDRESDATA1			STV090x_Px_DMDRESDATAy(1, 1)
+#define STV090x_P1_DMDRESDATA2			STV090x_Px_DMDRESDATAy(1, 2)
+#define STV090x_P1_DMDRESDATA3			STV090x_Px_DMDRESDATAy(1, 3)
+#define STV090x_P1_DMDRESDATA4			STV090x_Px_DMDRESDATAy(1, 4)
+#define STV090x_P1_DMDRESDATA5			STV090x_Px_DMDRESDATAy(1, 5)
+#define STV090x_P1_DMDRESDATA6			STV090x_Px_DMDRESDATAy(1, 6)
+#define STV090x_P1_DMDRESDATA7			STV090x_Px_DMDRESDATAy(1, 7)
+#define STV090x_P2_DMDRESDATA0			STV090x_Px_DMDRESDATAy(2, 0)
+#define STV090x_P2_DMDRESDATA1			STV090x_Px_DMDRESDATAy(2, 1)
+#define STV090x_P2_DMDRESDATA2			STV090x_Px_DMDRESDATAy(2, 2)
+#define STV090x_P2_DMDRESDATA3			STV090x_Px_DMDRESDATAy(2, 3)
+#define STV090x_P2_DMDRESDATA4			STV090x_Px_DMDRESDATAy(2, 4)
+#define STV090x_P2_DMDRESDATA5			STV090x_Px_DMDRESDATAy(2, 5)
+#define STV090x_P2_DMDRESDATA6			STV090x_Px_DMDRESDATAy(2, 6)
+#define STV090x_P2_DMDRESDATA7			STV090x_Px_DMDRESDATAy(2, 7)
+#define STV090x_OFFST_Px_DMDRES_DATA_FIELD	0
+#define STV090x_WIDTH_Px_DMDRES_DATA_FIELD	8
+
+#define STV090x_Px_FFEIy(__x, __y)		(0xf4d0 - (__x - 1) * 0x200 + 0x2 * (__y - 1))
+#define STV090x_P1_FFEI1			STV090x_Px_FFEIy(1, 1)
+#define STV090x_P1_FFEI2			STV090x_Px_FFEIy(1, 2)
+#define STV090x_P1_FFEI3			STV090x_Px_FFEIy(1, 3)
+#define STV090x_P1_FFEI4			STV090x_Px_FFEIy(1, 4)
+#define STV090x_P2_FFEI1			STV090x_Px_FFEIy(2, 1)
+#define STV090x_P2_FFEI2			STV090x_Px_FFEIy(2, 2)
+#define STV090x_P2_FFEI3			STV090x_Px_FFEIy(2, 3)
+#define STV090x_P2_FFEI4			STV090x_Px_FFEIy(2, 4)
+#define STV090x_OFFST_Px_FFE_ACCIy_FIELD	0
+#define STV090x_WIDTH_Px_FFE_ACCIy_FIELD	8
+
+#define STV090x_Px_FFEQy(__x, __y)		(0xf4d1 - (__x - 1) * 0x200 + 0x2 * (__y - 1))
+#define STV090x_P1_FFEQ1			STV090x_Px_FFEQy(1, 1)
+#define STV090x_P1_FFEQ2			STV090x_Px_FFEQy(1, 2)
+#define STV090x_P1_FFEQ3			STV090x_Px_FFEQy(1, 3)
+#define STV090x_P1_FFEQ4			STV090x_Px_FFEQy(1, 4)
+#define STV090x_P2_FFEQ1			STV090x_Px_FFEQy(2, 1)
+#define STV090x_P2_FFEQ2			STV090x_Px_FFEQy(2, 2)
+#define STV090x_P2_FFEQ3			STV090x_Px_FFEQy(2, 3)
+#define STV090x_P2_FFEQ4			STV090x_Px_FFEQy(2, 4)
+#define STV090x_OFFST_Px_FFE_ACCQy_FIELD	0
+#define STV090x_WIDTH_Px_FFE_ACCQy_FIELD	8
+
+#define STV090x_Px_FFECFG(__x)			(0xf4d8 - (__x - 1) * 0x200)
+#define STV090x_P1_FFECFG			STV090x_Px_FFECFG(1)
+#define STV090x_P2_FFECFG			STV090x_Px_FFECFG(2)
+#define STV090x_OFFST_Px_EQUALFFE_ON_FIELD	6
+#define STV090x_WIDTH_Px_EQUALFFE_ON_FIELD	1
+
+#define STV090x_Px_SMAPCOEF7(__x)		(0xf500 - (__x - 1) * 0x200)
+#define STV090x_P1_SMAPCOEF7			STV090x_Px_SMAPCOEF7(1)
+#define STV090x_P2_SMAPCOEF7			STV090x_Px_SMAPCOEF7(2)
+#define STV090x_OFFST_Px_DIS_QSCALE_FIELD	7
+#define STV090x_WIDTH_Px_DIS_QSCALE_FIELD	1
+#define STV090x_OFFST_Px_SMAPCOEF_Q_LLR12_FIELD	0
+#define STV090x_WIDTH_Px_SMAPCOEF_Q_LLR12_FIELD	7
+
+#define STV090x_Px_SMAPCOEF6(__x)		(0xf501 - (__x - 1) * 0x200)
+#define STV090x_P1_SMAPCOEF6			STV090x_Px_SMAPCOEF6(1)
+#define STV090x_P2_SMAPCOEF6			STV090x_Px_SMAPCOEF6(2)
+#define STV090x_OFFST_Px_ADJ_8PSKLLR1_FIELD	2
+#define STV090x_WIDTH_Px_ADJ_8PSKLLR1_FIELD	1
+#define STV090x_OFFST_Px_OLD_8PSKLLR1_FIELD	1
+#define STV090x_WIDTH_Px_OLD_8PSKLLR1_FIELD	1
+#define STV090x_OFFST_Px_DIS_AB8PSK_FIELD	0
+#define STV090x_WIDTH_Px_DIS_AB8PSK_FIELD	1
+
+#define STV090x_Px_SMAPCOEF5(__x)			(0xf502 - (__x - 1) * 0x200)
+#define STV090x_P1_SMAPCOEF5				STV090x_Px_SMAPCOEF5(1)
+#define STV090x_P2_SMAPCOEF5				STV090x_Px_SMAPCOEF5(2)
+#define STV090x_OFFST_Px_DIS_8SCALE_FIELD		7
+#define STV090x_WIDTH_Px_DIS_8SCALE_FIELD		1
+#define STV090x_OFFST_Px_SMAPCOEF_8P_LLR23_FIELD	0
+#define STV090x_WIDTH_Px_SMAPCOEF_8P_LLR23_FIELD	7
+
+#define STV090x_Px_DMDPLHSTAT(__x)		(0xF520 - (__x - 1) * 0x200)
+#define STV090x_P1_DMDPLHSTAT			STV090x_Px_DMDPLHSTAT(1)
+#define STV090x_P2_DMDPLHSTAT			STV090x_Px_DMDPLHSTAT(2)
+#define STV090x_OFFST_Px_PLH_STATISTIC_FIELD	0
+#define STV090x_WIDTH_Px_PLH_STATISTIC_FIELD	8
+
+#define STV090x_Px_LOCKTIMEy(__x, __y)		(0xF525 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_LOCKTIME0			STV090x_Px_LOCKTIMEy(1, 0)
+#define STV090x_P1_LOCKTIME1			STV090x_Px_LOCKTIMEy(1, 1)
+#define STV090x_P1_LOCKTIME2			STV090x_Px_LOCKTIMEy(1, 2)
+#define STV090x_P1_LOCKTIME3			STV090x_Px_LOCKTIMEy(1, 3)
+#define STV090x_P2_LOCKTIME0			STV090x_Px_LOCKTIMEy(2, 0)
+#define STV090x_P2_LOCKTIME1			STV090x_Px_LOCKTIMEy(2, 1)
+#define STV090x_P2_LOCKTIME2			STV090x_Px_LOCKTIMEy(2, 2)
+#define STV090x_P2_LOCKTIME3			STV090x_Px_LOCKTIMEy(2, 3)
+#define STV090x_OFFST_Px_DEMOD_LOCKTIME_FIELD	0
+#define STV090x_WIDTH_Px_DEMOD_LOCKTIME_FIELD	8
+
+#define STV090x_Px_TNRCFG(__x)			(0xf4e0 - (__x - 1) * 0x200) /* check */
+#define STV090x_P1_TNRCFG			STV090x_Px_TNRCFG(1)
+#define STV090x_P2_TNRCFG			STV090x_Px_TNRCFG(2)
+
+#define STV090x_Px_TNRCFG2(__x)			(0xf4e1 - (__x - 1) * 0x200)
+#define STV090x_P1_TNRCFG2			STV090x_Px_TNRCFG2(1)
+#define STV090x_P2_TNRCFG2			STV090x_Px_TNRCFG2(2)
+#define STV090x_OFFST_Px_TUN_IQSWAP_FIELD	7
+#define STV090x_WIDTH_Px_TUN_IQSWAP_FIELD	1
+
+#define STV090x_Px_VITSCALE(__x)		(0xf532 - (__x - 1) * 0x200)
+#define STV090x_P1_VITSCALE			STV090x_Px_VITSCALE(1)
+#define STV090x_P2_VITSCALE			STV090x_Px_VITSCALE(2)
+#define STV090x_OFFST_Px_NVTH_NOSRANGE_FIELD	7
+#define STV090x_WIDTH_Px_NVTH_NOSRANGE_FIELD	1
+#define STV090x_OFFST_Px_VERROR_MAXMODE_FIELD	6
+#define STV090x_WIDTH_Px_VERROR_MAXMODE_FIELD	1
+#define STV090x_OFFST_Px_NSLOWSN_LOCKED_FIELD	3
+#define STV090x_WIDTH_Px_NSLOWSN_LOCKED_FIELD	1
+#define STV090x_OFFST_Px_DIS_RSFLOCK_FIELD	1
+#define STV090x_WIDTH_Px_DIS_RSFLOCK_FIELD	1
+
+#define STV090x_Px_FECM(__x)			(0xf533 - (__x - 1) * 0x200)
+#define STV090x_P1_FECM				STV090x_Px_FECM(1)
+#define STV090x_P2_FECM				STV090x_Px_FECM(2)
+#define STV090x_OFFST_Px_DSS_DVB_FIELD		7
+#define STV090x_WIDTH_Px_DSS_DVB_FIELD		1
+#define STV090x_OFFST_Px_DSS_SRCH_FIELD		4
+#define STV090x_WIDTH_Px_DSS_SRCH_FIELD		1
+#define STV090x_OFFST_Px_SYNCVIT_FIELD		1
+#define STV090x_WIDTH_Px_SYNCVIT_FIELD		1
+#define STV090x_OFFST_Px_IQINV_FIELD		0
+#define STV090x_WIDTH_Px_IQINV_FIELD		1
+
+#define STV090x_Px_VTH12(__x)			(0xf534 - (__x - 1) * 0x200)
+#define STV090x_P1_VTH12			STV090x_Px_VTH12(1)
+#define STV090x_P2_VTH12			STV090x_Px_VTH12(2)
+#define STV090x_OFFST_Px_VTH12_FIELD		0
+#define STV090x_WIDTH_Px_VTH12_FIELD		8
+
+#define STV090x_Px_VTH23(__x)			(0xf535 - (__x - 1) * 0x200)
+#define STV090x_P1_VTH23			STV090x_Px_VTH23(1)
+#define STV090x_P2_VTH23			STV090x_Px_VTH23(2)
+#define STV090x_OFFST_Px_VTH23_FIELD		0
+#define STV090x_WIDTH_Px_VTH23_FIELD		8
+
+#define STV090x_Px_VTH34(__x)			(0xf536 - (__x - 1) * 0x200)
+#define STV090x_P1_VTH34			STV090x_Px_VTH34(1)
+#define STV090x_P2_VTH34			STV090x_Px_VTH34(2)
+#define STV090x_OFFST_Px_VTH34_FIELD		0
+#define STV090x_WIDTH_Px_VTH34_FIELD		8
+
+#define STV090x_Px_VTH56(__x)			(0xf537 - (__x - 1) * 0x200)
+#define STV090x_P1_VTH56			STV090x_Px_VTH56(1)
+#define STV090x_P2_VTH56			STV090x_Px_VTH56(2)
+#define STV090x_OFFST_Px_VTH56_FIELD		0
+#define STV090x_WIDTH_Px_VTH56_FIELD		8
+
+#define STV090x_Px_VTH67(__x)			(0xf538 - (__x - 1) * 0x200)
+#define STV090x_P1_VTH67			STV090x_Px_VTH67(1)
+#define STV090x_P2_VTH67			STV090x_Px_VTH67(2)
+#define STV090x_OFFST_Px_VTH67_FIELD		0
+#define STV090x_WIDTH_Px_VTH67_FIELD		8
+
+#define STV090x_Px_VTH78(__x)			(0xf539 - (__x - 1) * 0x200)
+#define STV090x_P1_VTH78			STV090x_Px_VTH78(1)
+#define STV090x_P2_VTH78			STV090x_Px_VTH78(2)
+#define STV090x_OFFST_Px_VTH78_FIELD		0
+#define STV090x_WIDTH_Px_VTH78_FIELD		8
+
+#define STV090x_Px_VITCURPUN(__x)		(0xf53a - (__x - 1) * 0x200)
+#define STV090x_P1_VITCURPUN			STV090x_Px_VITCURPUN(1)
+#define STV090x_P2_VITCURPUN			STV090x_Px_VITCURPUN(2)
+#define STV090x_OFFST_Px_VIT_CURPUN_FIELD	0
+#define STV090x_WIDTH_Px_VIT_CURPUN_FIELD	5
+
+#define STV090x_Px_VERROR(__x)			(0xf53b - (__x - 1) * 0x200)
+#define STV090x_P1_VERROR			STV090x_Px_VERROR(1)
+#define STV090x_P2_VERROR			STV090x_Px_VERROR(2)
+#define STV090x_OFFST_Px_REGERR_VIT_FIELD	0
+#define STV090x_WIDTH_Px_REGERR_VIT_FIELD	8
+
+#define STV090x_Px_PRVIT(__x)			(0xf53c - (__x - 1) * 0x200)
+#define STV090x_P1_PRVIT			STV090x_Px_PRVIT(1)
+#define STV090x_P2_PRVIT			STV090x_Px_PRVIT(2)
+#define STV090x_OFFST_Px_DIS_VTHLOCK_FIELD	6
+#define STV090x_WIDTH_Px_DIS_VTHLOCK_FIELD	1
+#define STV090x_OFFST_Px_E7_8VIT_FIELD		5
+#define STV090x_WIDTH_Px_E7_8VIT_FIELD		1
+#define STV090x_OFFST_Px_E6_7VIT_FIELD		4
+#define STV090x_WIDTH_Px_E6_7VIT_FIELD		1
+#define STV090x_OFFST_Px_E5_6VIT_FIELD		3
+#define STV090x_WIDTH_Px_E5_6VIT_FIELD		1
+#define STV090x_OFFST_Px_E3_4VIT_FIELD		2
+#define STV090x_WIDTH_Px_E3_4VIT_FIELD		1
+#define STV090x_OFFST_Px_E2_3VIT_FIELD		1
+#define STV090x_WIDTH_Px_E2_3VIT_FIELD		1
+#define STV090x_OFFST_Px_E1_2VIT_FIELD		0
+#define STV090x_WIDTH_Px_E1_2VIT_FIELD		1
+
+#define STV090x_Px_VAVSRVIT(__x)		(0xf53d - (__x - 1) * 0x200)
+#define STV090x_P1_VAVSRVIT			STV090x_Px_VAVSRVIT(1)
+#define STV090x_P2_VAVSRVIT			STV090x_Px_VAVSRVIT(2)
+#define STV090x_OFFST_Px_SNVIT_FIELD		4
+#define STV090x_WIDTH_Px_SNVIT_FIELD		2
+#define STV090x_OFFST_Px_TOVVIT_FIELD		2
+#define STV090x_WIDTH_Px_TOVVIT_FIELD		2
+#define STV090x_OFFST_Px_HYPVIT_FIELD		0
+#define STV090x_WIDTH_Px_HYPVIT_FIELD		2
+
+#define STV090x_Px_VSTATUSVIT(__x)		(0xf53e - (__x - 1) * 0x200)
+#define STV090x_P1_VSTATUSVIT			STV090x_Px_VSTATUSVIT(1)
+#define STV090x_P2_VSTATUSVIT			STV090x_Px_VSTATUSVIT(2)
+#define STV090x_OFFST_Px_PRFVIT_FIELD		4
+#define STV090x_WIDTH_Px_PRFVIT_FIELD		1
+#define STV090x_OFFST_Px_LOCKEDVIT_FIELD	3
+#define STV090x_WIDTH_Px_LOCKEDVIT_FIELD	1
+
+#define STV090x_Px_VTHINUSE(__x)		(0xf53f - (__x - 1) * 0x200)
+#define STV090x_P1_VTHINUSE			STV090x_Px_VTHINUSE(1)
+#define STV090x_P2_VTHINUSE			STV090x_Px_VTHINUSE(2)
+#define STV090x_OFFST_Px_VIT_INUSE_FIELD	0
+#define STV090x_WIDTH_Px_VIT_INUSE_FIELD	8
+
+#define STV090x_Px_KDIV12(__x)			(0xf540 - (__x - 1) * 0x200)
+#define STV090x_P1_KDIV12			STV090x_Px_KDIV12(1)
+#define STV090x_P2_KDIV12			STV090x_Px_KDIV12(2)
+#define STV090x_OFFST_Px_K_DIVIDER_12_FIELD	0
+#define STV090x_WIDTH_Px_K_DIVIDER_12_FIELD	7
+
+#define STV090x_Px_KDIV23(__x)			(0xf541 - (__x - 1) * 0x200)
+#define STV090x_P1_KDIV23			STV090x_Px_KDIV23(1)
+#define STV090x_P2_KDIV23			STV090x_Px_KDIV23(2)
+#define STV090x_OFFST_Px_K_DIVIDER_23_FIELD	0
+#define STV090x_WIDTH_Px_K_DIVIDER_23_FIELD	7
+
+#define STV090x_Px_KDIV34(__x)			(0xf542 - (__x - 1) * 0x200)
+#define STV090x_P1_KDIV34			STV090x_Px_KDIV34(1)
+#define STV090x_P2_KDIV34			STV090x_Px_KDIV34(2)
+#define STV090x_OFFST_Px_K_DIVIDER_34_FIELD	0
+#define STV090x_WIDTH_Px_K_DIVIDER_34_FIELD	7
+
+#define STV090x_Px_KDIV56(__x)			(0xf543 - (__x - 1) * 0x200)
+#define STV090x_P1_KDIV56			STV090x_Px_KDIV56(1)
+#define STV090x_P2_KDIV56			STV090x_Px_KDIV56(2)
+#define STV090x_OFFST_Px_K_DIVIDER_56_FIELD	0
+#define STV090x_WIDTH_Px_K_DIVIDER_56_FIELD	7
+
+#define STV090x_Px_KDIV67(__x)			(0xf544 - (__x - 1) * 0x200)
+#define STV090x_P1_KDIV67			STV090x_Px_KDIV67(1)
+#define STV090x_P2_KDIV67			STV090x_Px_KDIV67(2)
+#define STV090x_OFFST_Px_K_DIVIDER_67_FIELD	0
+#define STV090x_WIDTH_Px_K_DIVIDER_67_FIELD	7
+
+#define STV090x_Px_KDIV78(__x)			(0xf545 - (__x - 1) * 0x200)
+#define STV090x_P1_KDIV78			STV090x_Px_KDIV78(1)
+#define STV090x_P2_KDIV78			STV090x_Px_KDIV78(2)
+#define STV090x_OFFST_Px_K_DIVIDER_78_FIELD	0
+#define STV090x_WIDTH_Px_K_DIVIDER_78_FIELD	7
+
+#define STV090x_Px_PDELCTRL1(__x)		(0xf550 - (__x - 1) * 0x200)
+#define STV090x_P1_PDELCTRL1			STV090x_Px_PDELCTRL1(1)
+#define STV090x_P2_PDELCTRL1			STV090x_Px_PDELCTRL1(2)
+#define STV090x_OFFST_Px_INV_MISMASK_FIELD	7
+#define STV090x_WIDTH_Px_INV_MISMASK_FIELD	1
+#define STV090x_OFFST_Px_FILTER_EN_FIELD	5
+#define STV090x_WIDTH_Px_FILTER_EN_FIELD	1
+#define STV090x_OFFST_Px_EN_MIS00_FIELD		1
+#define STV090x_WIDTH_Px_EN_MIS00_FIELD		1
+#define STV090x_OFFST_Px_ALGOSWRST_FIELD	0
+#define STV090x_WIDTH_Px_ALGOSWRST_FIELD	1
+
+#define STV090x_Px_PDELCTRL2(__x)		(0xf551 - (__x - 1) * 0x200)
+#define STV090x_P1_PDELCTRL2			STV090x_Px_PDELCTRL2(1)
+#define STV090x_P2_PDELCTRL2			STV090x_Px_PDELCTRL2(2)
+#define STV090x_OFFST_Px_FORCE_CONTINUOUS	7
+#define STV090x_WIDTH_Px_FORCE_CONTINUOUS	1
+#define STV090x_OFFST_Px_RESET_UPKO_COUNT	6
+#define STV090x_WIDTH_Px_RESET_UPKO_COUNT	1
+#define STV090x_OFFST_Px_USER_PKTDELIN_NB	5
+#define STV090x_WIDTH_Px_USER_PKTDELIN_NB	1
+#define STV090x_OFFST_Px_FORCE_LOCKED		4
+#define STV090x_WIDTH_Px_FORCE_LOCKED		1
+#define STV090x_OFFST_Px_DATA_UNBBSCRAM		3
+#define STV090x_WIDTH_Px_DATA_UNBBSCRAM		1
+#define STV090x_OFFST_Px_FORCE_LONGPACKET	2
+#define STV090x_WIDTH_Px_FORCE_LONGPACKET	1
+#define STV090x_OFFST_Px_FRAME_MODE_FIELD	1
+#define STV090x_WIDTH_Px_FRAME_MODE_FIELD	1
+
+#define STV090x_Px_HYSTTHRESH(__x)		(0xf554 - (__x - 1) * 0x200)
+#define STV090x_P1_HYSTTHRESH			STV090x_Px_HYSTTHRESH(1)
+#define STV090x_P2_HYSTTHRESH			STV090x_Px_HYSTTHRESH(2)
+#define STV090x_OFFST_Px_UNLCK_THRESH_FIELD	4
+#define STV090x_WIDTH_Px_UNLCK_THRESH_FIELD	4
+#define STV090x_OFFST_Px_DELIN_LCK_THRESH_FIELD	0
+#define STV090x_WIDTH_Px_DELIN_LCK_THRESH_FIELD	4
+
+#define STV090x_Px_ISIENTRY(__x)		(0xf55e - (__x - 1) * 0x200)
+#define STV090x_P1_ISIENTRY			STV090x_Px_ISIENTRY(1)
+#define STV090x_P2_ISIENTRY			STV090x_Px_ISIENTRY(2)
+#define STV090x_OFFST_Px_ISI_ENTRY_FIELD	0
+#define STV090x_WIDTH_Px_ISI_ENTRY_FIELD	8
+
+#define STV090x_Px_ISIBITENA(__x)		(0xf55f - (__x - 1) * 0x200)
+#define STV090x_P1_ISIBITENA			STV090x_Px_ISIBITENA(1)
+#define STV090x_P2_ISIBITENA			STV090x_Px_ISIBITENA(2)
+#define STV090x_OFFST_Px_ISI_BIT_EN_FIELD	0
+#define STV090x_WIDTH_Px_ISI_BIT_EN_FIELD	8
+
+#define STV090x_Px_MATSTRy(__x, __y)		(0xf561 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_MATSTR0			STV090x_Px_MATSTRy(1, 0)
+#define STV090x_P1_MATSTR1			STV090x_Px_MATSTRy(1, 1)
+#define STV090x_P2_MATSTR0			STV090x_Px_MATSTRy(2, 0)
+#define STV090x_P2_MATSTR1			STV090x_Px_MATSTRy(2, 1)
+#define STV090x_OFFST_Px_MATYPE_CURRENT_FIELD	0
+#define STV090x_WIDTH_Px_MATYPE_CURRENT_FIELD	8
+
+#define STV090x_Px_UPLSTRy(__x, __y)		(0xf563 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_UPLSTR0			STV090x_Px_UPLSTRy(1, 0)
+#define STV090x_P1_UPLSTR1			STV090x_Px_UPLSTRy(1, 1)
+#define STV090x_P2_UPLSTR0			STV090x_Px_UPLSTRy(2, 0)
+#define STV090x_P2_UPLSTR1			STV090x_Px_UPLSTRy(2, 1)
+#define STV090x_OFFST_Px_UPL_CURRENT_FIELD	0
+#define STV090x_WIDTH_Px_UPL_CURRENT_FIELD	8
+
+#define STV090x_Px_DFLSTRy(__x, __y)		(0xf565 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_DFLSTR0			STV090x_Px_DFLSTRy(1, 0)
+#define STV090x_P1_DFLSTR1			STV090x_Px_DFLSTRy(1, 1)
+#define STV090x_P2_DFLSTR0			STV090x_Px_DFLSTRy(2, 0)
+#define STV090x_P2_DFLSTR1			STV090x_Px_DFLSTRy(2, 1)
+#define STV090x_OFFST_Px_DFL_CURRENT_FIELD	0
+#define STV090x_WIDTH_Px_DFL_CURRENT_FIELD	8
+
+#define STV090x_Px_SYNCSTR(__x)			(0xf566 - (__x - 1) * 0x200)
+#define STV090x_P1_SYNCSTR			STV090x_Px_SYNCSTR(1)
+#define STV090x_P2_SYNCSTR			STV090x_Px_SYNCSTR(2)
+#define STV090x_OFFST_Px_SYNC_CURRENT_FIELD	0
+#define STV090x_WIDTH_Px_SYNC_CURRENT_FIELD	8
+
+#define STV090x_Px_SYNCDSTRy(__x, __y)		(0xf568 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_SYNCDSTR0			STV090x_Px_SYNCDSTRy(1, 0)
+#define STV090x_P1_SYNCDSTR1			STV090x_Px_SYNCDSTRy(1, 1)
+#define STV090x_P2_SYNCDSTR0			STV090x_Px_SYNCDSTRy(2, 0)
+#define STV090x_P2_SYNCDSTR1			STV090x_Px_SYNCDSTRy(2, 1)
+#define STV090x_OFFST_Px_SYNCD_CURRENT_FIELD	0
+#define STV090x_WIDTH_Px_SYNCD_CURRENT_FIELD	8
+
+#define STV090x_Px_PDELSTATUS1(__x)		(0xf569 - (__x - 1) * 0x200)
+#define STV090x_P1_PDELSTATUS1			STV090x_Px_PDELSTATUS1(1)
+#define STV090x_P2_PDELSTATUS1			STV090x_Px_PDELSTATUS1(2)
+#define STV090x_OFFST_Px_PKTDELIN_LOCK_FIELD	1
+#define STV090x_WIDTH_Px_PKTDELIN_LOCK_FIELD	1
+#define STV090x_OFFST_Px_FIRST_LOCK_FIELD	0
+#define STV090x_WIDTH_Px_FIRST_LOCK_FIELD	1
+
+#define STV090x_Px_PDELSTATUS2(__x)		(0xf56a - (__x - 1) * 0x200)
+#define STV090x_P1_PDELSTATUS2			STV090x_Px_PDELSTATUS2(1)
+#define STV090x_P2_PDELSTATUS2			STV090x_Px_PDELSTATUS2(2)
+#define STV090x_OFFST_Px_FRAME_MODCOD_FIELD	2
+#define STV090x_WIDTH_Px_FRAME_MODCOD_FIELD	5
+#define STV090x_OFFST_Px_FRAME_TYPE_FIELD	0
+#define STV090x_WIDTH_Px_FRAME_TYPE_FIELD	2
+
+#define STV090x_Px_BBFCRCKO1(__x)		(0xf56b - (__x - 1) * 0x200)
+#define STV090x_P1_BBFCRCKO1			STV090x_Px_BBFCRCKO1(1)
+#define STV090x_P2_BBFCRCKO1			STV090x_Px_BBFCRCKO1(2)
+#define STV090x_OFFST_Px_BBHCRC_KOCNT_FIELD	0
+#define STV090x_WIDTH_Px_BBHCRC_KOCNT_FIELD	8
+
+#define STV090x_Px_BBFCRCKO0(__x)		(0xf56c - (__x - 1) * 0x200)
+#define STV090x_P1_BBFCRCKO0			STV090x_Px_BBFCRCKO0(1)
+#define STV090x_P2_BBFCRCKO0			STV090x_Px_BBFCRCKO0(2)
+#define STV090x_OFFST_Px_BBHCRC_KOCNT_FIELD	0
+#define STV090x_WIDTH_Px_BBHCRC_KOCNT_FIELD	8
+
+#define STV090x_Px_UPCRCKO1(__x)		(0xf56d - (__x - 1) * 0x200)
+#define STV090x_P1_UPCRCKO1			STV090x_Px_UPCRCKO1(1)
+#define STV090x_P2_UPCRCKO1			STV090x_Px_UPCRCKO1(2)
+#define STV090x_OFFST_Px_PKTCRC_KOCNT_FIELD	0
+#define STV090x_WIDTH_Px_PKTCRC_KOCNT_FIELD	8
+
+#define STV090x_Px_UPCRCKO0(__x)		(0xf56e - (__x - 1) * 0x200)
+#define STV090x_P1_UPCRCKO0			STV090x_Px_UPCRCKO0(1)
+#define STV090x_P2_UPCRCKO0			STV090x_Px_UPCRCKO0(2)
+#define STV090x_OFFST_Px_PKTCRC_KOCNT_FIELD	0
+#define STV090x_WIDTH_Px_PKTCRC_KOCNT_FIELD	8
+
+#define STV090x_NBITER_NFx(__x)				(0xFA03 + (__x - 4) * 0x1)
+#define STV090x_NBITER_NF4				STV090x_NBITER_NFx(4)
+#define STV090x_NBITER_NF5				STV090x_NBITER_NFx(5)
+#define STV090x_NBITER_NF6				STV090x_NBITER_NFx(6)
+#define STV090x_NBITER_NF7				STV090x_NBITER_NFx(7)
+#define STV090x_NBITER_NF8				STV090x_NBITER_NFx(8)
+#define STV090x_NBITER_NF9				STV090x_NBITER_NFx(9)
+#define STV090x_NBITER_NF10				STV090x_NBITER_NFx(10)
+#define STV090x_NBITER_NF11				STV090x_NBITER_NFx(11)
+#define STV090x_NBITER_NF12				STV090x_NBITER_NFx(12)
+#define STV090x_NBITER_NF13				STV090x_NBITER_NFx(13)
+#define STV090x_NBITER_NF14				STV090x_NBITER_NFx(14)
+#define STV090x_NBITER_NF15				STV090x_NBITER_NFx(15)
+#define STV090x_NBITER_NF16				STV090x_NBITER_NFx(16)
+#define STV090x_NBITER_NF17				STV090x_NBITER_NFx(17)
+
+#define STV090x_NBITERNOERR				0xFA3F
+#define STV090x_OFFST_NBITER_STOP_CRIT_FIELD		0
+#define STV090x_WIDTH_NBITER_STOP_CRIT_FIELD		4
+
+#define STV090x_GAINLLR_NFx(__x)			(0xFA43 + (__x - 4) * 0x1)
+#define STV090x_GAINLLR_NF4				STV090x_GAINLLR_NFx(4)
+#define STV090x_OFFST_GAINLLR_NF_QP_1_2_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_QP_1_2_FIELD		7
+
+#define STV090x_GAINLLR_NF5				STV090x_GAINLLR_NFx(5)
+#define STV090x_OFFST_GAINLLR_NF_QP_3_5_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_QP_3_5_FIELD		7
+
+#define STV090x_GAINLLR_NF6				STV090x_GAINLLR_NFx(6)
+#define STV090x_OFFST_GAINLLR_NF_QP_2_3_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_QP_2_3_FIELD		7
+
+#define STV090x_GAINLLR_NF7				STV090x_GAINLLR_NFx(7)
+#define STV090x_OFFST_GAINLLR_NF_QP_3_4_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_QP_3_4_FIELD		7
+
+#define STV090x_GAINLLR_NF8				STV090x_GAINLLR_NFx(8)
+#define STV090x_OFFST_GAINLLR_NF_QP_4_5_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_QP_4_5_FIELD		7
+
+#define STV090x_GAINLLR_NF9				STV090x_GAINLLR_NFx(9)
+#define STV090x_OFFST_GAINLLR_NF_QP_5_6_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_QP_5_6_FIELD		7
+
+#define STV090x_GAINLLR_NF10				STV090x_GAINLLR_NFx(10)
+#define STV090x_OFFST_GAINLLR_NF_QP_8_9_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_QP_8_9_FIELD		7
+
+#define STV090x_GAINLLR_NF11				STV090x_GAINLLR_NFx(11)
+#define STV090x_OFFST_GAINLLR_NF_QP_9_10_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_QP_9_10_FIELD		7
+
+#define STV090x_GAINLLR_NF12				STV090x_GAINLLR_NFx(12)
+#define STV090x_OFFST_GAINLLR_NF_8P_3_5_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_8P_3_5_FIELD		7
+
+#define STV090x_GAINLLR_NF13				STV090x_GAINLLR_NFx(13)
+#define STV090x_OFFST_GAINLLR_NF_8P_2_3_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_8P_2_3_FIELD		7
+
+#define STV090x_GAINLLR_NF14				STV090x_GAINLLR_NFx(14)
+#define STV090x_OFFST_GAINLLR_NF_8P_3_4_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_8P_3_4_FIELD		7
+
+#define STV090x_GAINLLR_NF15				STV090x_GAINLLR_NFx(15)
+#define STV090x_OFFST_GAINLLR_NF_8P_5_6_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_8P_5_6_FIELD		7
+
+#define STV090x_GAINLLR_NF16				STV090x_GAINLLR_NFx(16)
+#define STV090x_OFFST_GAINLLR_NF_8P_8_9_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_8P_8_9_FIELD		7
+
+#define STV090x_GAINLLR_NF17				STV090x_GAINLLR_NFx(17)
+#define STV090x_OFFST_GAINLLR_NF_8P_9_10_FIELD		0
+#define STV090x_WIDTH_GAINLLR_NF_8P_9_10_FIELD		7
+
+#define STV090x_GENCFG					0xFA86
+#define STV090x_OFFST_BROADCAST_FIELD			4
+#define STV090x_WIDTH_BROADCAST_FIELD			1
+#define STV090x_OFFST_PRIORITY_FIELD			1
+#define STV090x_WIDTH_PRIORITY_FIELD			1
+#define STV090x_OFFST_DDEMOD_FIELD			0
+#define STV090x_WIDTH_DDEMOD_FIELD			1
+
+#define STV090x_LDPCERRx(__x)				(0xFA97 - (__x  * 0x1))
+#define STV090x_LDPCERR0				STV090x_LDPCERRx(0)
+#define STV090x_LDPCERR1				STV090x_LDPCERRx(1)
+#define STV090x_OFFST_Px_LDPC_ERRORS_COUNTER_FIELD	0
+#define STV090x_WIDTH_Px_LDPC_ERRORS_COUNTER_FIELD	8
+
+#define STV090x_BCHERR					0xFA98
+#define STV090x_OFFST_Px_ERRORFLAG_FIELD		4
+#define STV090x_WIDTH_Px_ERRORFLAG_FIELD		1
+#define STV090x_OFFST_Px_BCH_ERRORS_COUNTER_FIELD	0
+#define STV090x_WIDTH_Px_BCH_ERRORS_COUNTER_FIELD	4
+
+#define STV090x_Px_TSSTATEM(__x)			(0xF570 - (__x - 1) * 0x200)
+#define STV090x_P1_TSSTATEM				STV090x_Px_TSSTATEM(1)
+#define STV090x_P2_TSSTATEM				STV090x_Px_TSSTATEM(2)
+#define STV090x_OFFST_Px_TSDIL_ON_FIELD			7
+#define STV090x_WIDTH_Px_TSDIL_ON_FIELD			1
+#define STV090x_OFFST_Px_TSRS_ON_FIELD			5
+#define STV090x_WIDTH_Px_TSRS_ON_FIELD			1
+
+#define STV090x_Px_TSCFGH(__x)				(0xF572 - (__x - 1) * 0x200)
+#define STV090x_P1_TSCFGH				STV090x_Px_TSCFGH(1)
+#define STV090x_P2_TSCFGH				STV090x_Px_TSCFGH(2)
+#define STV090x_OFFST_Px_TSFIFO_DVBCI_FIELD		7
+#define STV090x_WIDTH_Px_TSFIFO_DVBCI_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_SERIAL_FIELD		6
+#define STV090x_WIDTH_Px_TSFIFO_SERIAL_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_TEIUPDATE_FIELD		5
+#define STV090x_WIDTH_Px_TSFIFO_TEIUPDATE_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_DUTY50_FIELD		4
+#define STV090x_WIDTH_Px_TSFIFO_DUTY50_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_HSGNLOUT_FIELD		3
+#define STV090x_WIDTH_Px_TSFIFO_HSGNLOUT_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_ERRORMODE_FIELD		1
+#define STV090x_WIDTH_Px_TSFIFO_ERRORMODE_FIELD		2
+#define STV090x_OFFST_Px_RST_HWARE_FIELD		0
+#define STV090x_WIDTH_Px_RST_HWARE_FIELD		1
+
+#define STV090x_Px_TSCFGM(__x)				(0xF573 - (__x - 1) * 0x200)
+#define STV090x_P1_TSCFGM				STV090x_Px_TSCFGM(1)
+#define STV090x_P2_TSCFGM				STV090x_Px_TSCFGM(2)
+#define STV090x_OFFST_Px_TSFIFO_MANSPEED_FIELD		6
+#define STV090x_WIDTH_Px_TSFIFO_MANSPEED_FIELD		2
+#define STV090x_OFFST_Px_TSFIFO_PERMDATA_FIELD		5
+#define STV090x_WIDTH_Px_TSFIFO_PERMDATA_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_INVDATA_FIELD		0
+#define STV090x_WIDTH_Px_TSFIFO_INVDATA_FIELD		1
+
+#define STV090x_Px_TSCFGL(__x)				(0xF574 - (__x - 1) * 0x200)
+#define STV090x_P1_TSCFGL				STV090x_Px_TSCFGL(1)
+#define STV090x_P2_TSCFGL				STV090x_Px_TSCFGL(2)
+#define STV090x_OFFST_Px_TSFIFO_BCLKDEL1CK_FIELD	6
+#define STV090x_WIDTH_Px_TSFIFO_BCLKDEL1CK_FIELD	2
+#define STV090x_OFFST_Px_BCHERROR_MODE_FIELD		4
+#define STV090x_WIDTH_Px_BCHERROR_MODE_FIELD		2
+#define STV090x_OFFST_Px_TSFIFO_NSGNL2DATA_FIELD	3
+#define STV090x_WIDTH_Px_TSFIFO_NSGNL2DATA_FIELD	1
+#define STV090x_OFFST_Px_TSFIFO_EMBINDVB_FIELD		2
+#define STV090x_WIDTH_Px_TSFIFO_EMBINDVB_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_DPUNACT_FIELD		1
+#define STV090x_WIDTH_Px_TSFIFO_DPUNACT_FIELD		1
+
+#define STV090x_Px_TSINSDELH(__x)			(0xF576 - (__x - 1) * 0x200)
+#define STV090x_P1_TSINSDELH				STV090x_Px_TSINSDELH(1)
+#define STV090x_P2_TSINSDELH				STV090x_Px_TSINSDELH(2)
+#define STV090x_OFFST_Px_TSDEL_SYNCBYTE_FIELD		7
+#define STV090x_WIDTH_Px_TSDEL_SYNCBYTE_FIELD		1
+#define STV090x_OFFST_Px_TSDEL_XXHEADER_FIELD		6
+#define STV090x_WIDTH_Px_TSDEL_XXHEADER_FIELD		1
+
+#define STV090x_Px_TSSPEED(__x)				(0xF580 - (__x - 1) * 0x200)
+#define STV090x_P1_TSSPEED				STV090x_Px_TSSPEED(1)
+#define STV090x_P2_TSSPEED				STV090x_Px_TSSPEED(2)
+#define STV090x_OFFST_Px_TSFIFO_OUTSPEED_FIELD		0
+#define STV090x_WIDTH_Px_TSFIFO_OUTSPEED_FIELD		8
+
+#define STV090x_Px_TSSTATUS(__x)			(0xF581 - (__x - 1) * 0x200)
+#define STV090x_P1_TSSTATUS				STV090x_Px_TSSTATUS(1)
+#define STV090x_P2_TSSTATUS				STV090x_Px_TSSTATUS(2)
+#define STV090x_OFFST_Px_TSFIFO_LINEOK_FIELD		7
+#define STV090x_WIDTH_Px_TSFIFO_LINEOK_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_ERROR_FIELD		6
+#define STV090x_WIDTH_Px_TSFIFO_ERROR_FIELD		1
+
+#define STV090x_Px_TSSTATUS2(__x)			(0xF582 - (__x - 1) * 0x200)
+#define STV090x_P1_TSSTATUS2				STV090x_Px_TSSTATUS2(1)
+#define STV090x_P2_TSSTATUS2				STV090x_Px_TSSTATUS2(2)
+#define STV090x_OFFST_Px_TSFIFO_DEMODSEL_FIELD		7
+#define STV090x_WIDTH_Px_TSFIFO_DEMODSEL_FIELD		1
+#define STV090x_OFFST_Px_TSFIFOSPEED_STORE_FIELD	6
+#define STV090x_WIDTH_Px_TSFIFOSPEED_STORE_FIELD	1
+#define STV090x_OFFST_Px_DILXX_RESET_FIELD		5
+#define STV090x_WIDTH_Px_DILXX_RESET_FIELD		1
+#define STV090x_OFFST_Px_TSSERIAL_IMPOS_FIELD		5
+#define STV090x_WIDTH_Px_TSSERIAL_IMPOS_FIELD		1
+#define STV090x_OFFST_Px_SCRAMBDETECT_FIELD		1
+#define STV090x_WIDTH_Px_SCRAMBDETECT_FIELD		1
+
+#define STV090x_Px_TSBITRATEy(__x, __y)			(0xF584 - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_TSBITRATE0				STV090x_Px_TSBITRATEy(1, 0)
+#define STV090x_P1_TSBITRATE1				STV090x_Px_TSBITRATEy(1, 1)
+#define STV090x_P2_TSBITRATE0				STV090x_Px_TSBITRATEy(2, 0)
+#define STV090x_P2_TSBITRATE1				STV090x_Px_TSBITRATEy(2, 1)
+#define STV090x_OFFST_Px_TSFIFO_BITRATE_FIELD		7
+#define STV090x_WIDTH_Px_TSFIFO_BITRATE_FIELD		8
+
+#define STV090x_Px_ERRCTRL1(__x)			(0xF598 - (__x - 1) * 0x200)
+#define STV090x_P1_ERRCTRL1				STV090x_Px_ERRCTRL1(1)
+#define STV090x_P2_ERRCTRL1				STV090x_Px_ERRCTRL1(2)
+#define STV090x_OFFST_Px_ERR_SOURCE_FIELD		4
+#define STV090x_WIDTH_Px_ERR_SOURCE_FIELD		4
+#define STV090x_OFFST_Px_NUM_EVENT_FIELD		0
+#define STV090x_WIDTH_Px_NUM_EVENT_FIELD		3
+
+#define STV090x_Px_ERRCNT12(__x)			(0xF599 - (__x - 1) * 0x200)
+#define STV090x_P1_ERRCNT12				STV090x_Px_ERRCNT12(1)
+#define STV090x_P2_ERRCNT12				STV090x_Px_ERRCNT12(2)
+#define STV090x_OFFST_Px_ERRCNT1_OLDVALUE_FIELD		7
+#define STV090x_WIDTH_Px_ERRCNT1_OLDVALUE_FIELD		1
+#define STV090x_OFFST_Px_ERR_CNT12_FIELD		0
+#define STV090x_WIDTH_Px_ERR_CNT12_FIELD		7
+
+#define STV090x_Px_ERRCNT11(__x)			(0xF59A - (__x - 1) * 0x200)
+#define STV090x_P1_ERRCNT11				STV090x_Px_ERRCNT11(1)
+#define STV090x_P2_ERRCNT11				STV090x_Px_ERRCNT11(2)
+#define STV090x_OFFST_Px_ERR_CNT11_FIELD		0
+#define STV090x_WIDTH_Px_ERR_CNT11_FIELD		8
+
+#define STV090x_Px_ERRCNT10(__x)			(0xF59B - (__x - 1) * 0x200)
+#define STV090x_P1_ERRCNT10				STV090x_Px_ERRCNT10(1)
+#define STV090x_P2_ERRCNT10				STV090x_Px_ERRCNT10(2)
+#define STV090x_OFFST_Px_ERR_CNT10_FIELD		0
+#define STV090x_WIDTH_Px_ERR_CNT10_FIELD		8
+
+#define STV090x_Px_ERRCTRL2(__x)			(0xF59C - (__x - 1) * 0x200)
+#define STV090x_P1_ERRCTRL2				STV090x_Px_ERRCTRL2(1)
+#define STV090x_P2_ERRCTRL2				STV090x_Px_ERRCTRL2(2)
+#define STV090x_OFFST_Px_ERR_SOURCE2_FIELD		4
+#define STV090x_WIDTH_Px_ERR_SOURCE2_FIELD		4
+#define STV090x_OFFST_Px_NUM_EVENT2_FIELD		0
+#define STV090x_WIDTH_Px_NUM_EVENT2_FIELD		3
+
+#define STV090x_Px_ERRCNT22(__x)			(0xF59D - (__x - 1) * 0x200)
+#define STV090x_P1_ERRCNT22				STV090x_Px_ERRCNT22(1)
+#define STV090x_P2_ERRCNT22				STV090x_Px_ERRCNT22(2)
+#define STV090x_OFFST_Px_ERRCNT2_OLDVALUE_FIELD		7
+#define STV090x_WIDTH_Px_ERRCNT2_OLDVALUE_FIELD		1
+#define STV090x_OFFST_Px_ERR_CNT2_FIELD			0
+#define STV090x_WIDTH_Px_ERR_CNT2_FIELD			7
+
+#define STV090x_Px_ERRCNT21(__x)			(0xF59E - (__x - 1) * 0x200)
+#define STV090x_P1_ERRCNT21				STV090x_Px_ERRCNT21(1)
+#define STV090x_P2_ERRCNT21				STV090x_Px_ERRCNT21(2)
+#define STV090x_OFFST_Px_ERR_CNT21_FIELD		0
+#define STV090x_WIDTH_Px_ERR_CNT21_FIELD		8
+
+#define STV090x_Px_ERRCNT20(__x)			(0xF59F - (__x - 1) * 0x200)
+#define STV090x_P1_ERRCNT20				STV090x_Px_ERRCNT20(1)
+#define STV090x_P2_ERRCNT20				STV090x_Px_ERRCNT20(2)
+#define STV090x_OFFST_Px_ERR_CNT20_FIELD		0
+#define STV090x_WIDTH_Px_ERR_CNT20_FIELD		8
+
+#define STV090x_Px_FECSPY(__x)				(0xF5A0 - (__x - 1) * 0x200)
+#define STV090x_P1_FECSPY				STV090x_Px_FECSPY(1)
+#define STV090x_P2_FECSPY				STV090x_Px_FECSPY(2)
+#define STV090x_OFFST_Px_SPY_ENABLE_FIELD		7
+#define STV090x_WIDTH_Px_SPY_ENABLE_FIELD		1
+#define STV090x_OFFST_Px_BERMETER_DATAMAODE_FIELD	2
+#define STV090x_WIDTH_Px_BERMETER_DATAMAODE_FIELD	2
+
+#define STV090x_Px_FSPYCFG(__x)				(0xF5A1 - (__x - 1) * 0x200)
+#define STV090x_P1_FSPYCFG				STV090x_Px_FSPYCFG(1)
+#define STV090x_P2_FSPYCFG				STV090x_Px_FSPYCFG(2)
+#define STV090x_OFFST_Px_RST_ON_ERROR_FIELD		5
+#define STV090x_WIDTH_Px_RST_ON_ERROR_FIELD		1
+#define STV090x_OFFST_Px_ONE_SHOT_FIELD			4
+#define STV090x_WIDTH_Px_ONE_SHOT_FIELD			1
+#define STV090x_OFFST_Px_I2C_MODE_FIELD			2
+#define STV090x_WIDTH_Px_I2C_MODE_FIELD			2
+
+#define STV090x_Px_FSPYDATA(__x)			(0xF5A2 - (__x - 1) * 0x200)
+#define STV090x_P1_FSPYDATA				STV090x_Px_FSPYDATA(1)
+#define STV090x_P2_FSPYDATA				STV090x_Px_FSPYDATA(2)
+#define STV090x_OFFST_Px_SPY_STUFFING_FIELD		7
+#define STV090x_WIDTH_Px_SPY_STUFFING_FIELD		1
+#define STV090x_OFFST_Px_SPY_CNULLPKT_FIELD		5
+#define STV090x_WIDTH_Px_SPY_CNULLPKT_FIELD		1
+#define STV090x_OFFST_Px_SPY_OUTDATA_MODE_FIELD		0
+#define STV090x_WIDTH_Px_SPY_OUTDATA_MODE_FIELD		5
+
+#define STV090x_Px_FSPYOUT(__x)				(0xF5A3 - (__x - 1) * 0x200)
+#define STV090x_P1_FSPYOUT				STV090x_Px_FSPYOUT(1)
+#define STV090x_P2_FSPYOUT				STV090x_Px_FSPYOUT(2)
+#define STV090x_OFFST_Px_FSPY_DIRECT_FIELD		7
+#define STV090x_WIDTH_Px_FSPY_DIRECT_FIELD		1
+#define STV090x_OFFST_Px_STUFF_MODE_FIELD		0
+#define STV090x_WIDTH_Px_STUFF_MODE_FIELD		3
+
+#define STV090x_Px_FSTATUS(__x)				(0xF5A4 - (__x - 1) * 0x200)
+#define STV090x_P1_FSTATUS				STV090x_Px_FSTATUS(1)
+#define STV090x_P2_FSTATUS				STV090x_Px_FSTATUS(2)
+#define STV090x_OFFST_Px_SPY_ENDSIM_FIELD		7
+#define STV090x_WIDTH_Px_SPY_ENDSIM_FIELD		1
+#define STV090x_OFFST_Px_VALID_SIM_FIELD		6
+#define STV090x_WIDTH_Px_VALID_SIM_FIELD		1
+#define STV090x_OFFST_Px_FOUND_SIGNAL_FIELD		5
+#define STV090x_WIDTH_Px_FOUND_SIGNAL_FIELD		1
+#define STV090x_OFFST_Px_DSS_SYNCBYTE_FIELD		4
+#define STV090x_WIDTH_Px_DSS_SYNCBYTE_FIELD		1
+#define STV090x_OFFST_Px_RESULT_STATE_FIELD		0
+#define STV090x_WIDTH_Px_RESULT_STATE_FIELD		4
+
+#define STV090x_Px_FBERCPT4(__x)			(0xF5A8 - (__x - 1) * 0x200)
+#define STV090x_P1_FBERCPT4				STV090x_Px_FBERCPT4(1)
+#define STV090x_P2_FBERCPT4				STV090x_Px_FBERCPT4(2)
+#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
+#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
+
+#define STV090x_Px_FBERCPT3(__x)			(0xF5A9 - (__x - 1) * 0x200)
+#define STV090x_P1_FBERCPT3				STV090x_Px_FBERCPT3(1)
+#define STV090x_P2_FBERCPT3				STV090x_Px_FBERCPT3(2)
+#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
+#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
+
+#define STV090x_Px_FBERCPT2(__x)			(0xF5AA - (__x - 1) * 0x200)
+#define STV090x_P1_FBERCPT2				STV090x_Px_FBERCPT2(1)
+#define STV090x_P2_FBERCPT2				STV090x_Px_FBERCPT2(2)
+#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
+#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
+
+#define STV090x_Px_FBERCPT1(__x)			(0xF5AB - (__x - 1) * 0x200)
+#define STV090x_P1_FBERCPT1				STV090x_Px_FBERCPT1(1)
+#define STV090x_P2_FBERCPT1				STV090x_Px_FBERCPT1(2)
+#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
+#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
+
+#define STV090x_Px_FBERCPT0(__x)			(0xF5AC - (__x - 1) * 0x200)
+#define STV090x_P1_FBERCPT0				STV090x_Px_FBERCPT0(1)
+#define STV090x_P2_FBERCPT0				STV090x_Px_FBERCPT0(2)
+#define STV090x_OFFST_Px_FBERMETER_CPT_FIELD		0
+#define STV090x_WIDTH_Px_FBERMETER_CPT_FIELD		8
+
+#define STV090x_Px_FBERERRy(__x, __y)			(0xF5AF - (__x - 1) * 0x200 - __y * 0x1)
+#define STV090x_P1_FBERERR0				STV090x_Px_FBERERRy(1, 0)
+#define STV090x_P1_FBERERR1				STV090x_Px_FBERERRy(1, 1)
+#define STV090x_P1_FBERERR2				STV090x_Px_FBERERRy(1, 2)
+#define STV090x_P2_FBERERR0				STV090x_Px_FBERERRy(2, 0)
+#define STV090x_P2_FBERERR1				STV090x_Px_FBERERRy(2, 1)
+#define STV090x_P2_FBERERR2				STV090x_Px_FBERERRy(2, 2)
+#define STV090x_OFFST_Px_FBERMETER_CPT_ERR_FIELD	0
+#define STV090x_WIDTH_Px_FBERMETER_CPT_ERR_FIELD	8
+
+#define STV090x_Px_FSPYBER(__x)				(0xF5B2 - (__x - 1) * 0x200)
+#define STV090x_P1_FSPYBER				STV090x_Px_FSPYBER(1)
+#define STV090x_P2_FSPYBER				STV090x_Px_FSPYBER(2)
+#define STV090x_OFFST_Px_FSPYBER_SYNCBYTE_FIELD		4
+#define STV090x_WIDTH_Px_FSPYBER_SYNCBYTE_FIELD		1
+#define STV090x_OFFST_Px_FSPYBER_UNSYNC_FIELD		3
+#define STV090x_WIDTH_Px_FSPYBER_UNSYNC_FIELD		1
+#define STV090x_OFFST_Px_FSPYBER_CTIME_FIELD		0
+#define STV090x_WIDTH_Px_FSPYBER_CTIME_FIELD		3
+
+#define STV090x_RCCFGH					0xf600
+
+#define STV090x_TSGENERAL				0xF630
+#define STV090x_OFFST_Px_MUXSTREAM_OUT_FIELD		3
+#define STV090x_WIDTH_Px_MUXSTREAM_OUT_FIELD		1
+#define STV090x_OFFST_Px_TSFIFO_PERMPARAL_FIELD		1
+#define STV090x_WIDTH_Px_TSFIFO_PERMPARAL_FIELD		2
+
+#define STV090x_TSGENERAL1X				0xf670
+#define STV090x_CFGEXT					0xfa80
+
+#define STV090x_TSTRES0					0xFF11
+#define STV090x_OFFST_FRESFEC_FIELD			7
+#define STV090x_WIDTH_FRESFEC_FIELD			1
+
+#define STV090x_Px_TSTDISRX(__x)			(0xFF67 - (__x - 1) * 0x2)
+#define STV090x_P1_TSTDISRX				STV090x_Px_TSTDISRX(1)
+#define STV090x_P2_TSTDISRX				STV090x_Px_TSTDISRX(2)
+#define STV090x_OFFST_Px_TSTDISRX_SELECT_FIELD		3
+#define STV090x_WIDTH_Px_TSTDISRX_SELECT_FIELD		1
+
+#endif /* __STV090x_REG_H */
diff --git a/drivers/media/dvb/frontends/stv6110x.c b/drivers/media/dvb/frontends/stv6110x.c
new file mode 100644
index 00000000000..3d8a2e01c9c
--- /dev/null
+++ b/drivers/media/dvb/frontends/stv6110x.c
@@ -0,0 +1,373 @@
+/*
+	STV6110(A) Silicon tuner driver
+
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include "dvb_frontend.h"
+
+#include "stv6110x_reg.h"
+#include "stv6110x.h"
+#include "stv6110x_priv.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "Set Verbosity level");
+
+static u8 stv6110x_regs[] = {0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e};
+
+static int stv6110x_read_reg(struct stv6110x_state *stv6110x, u8 reg, u8 *data)
+{
+	int ret;
+	const struct stv6110x_config *config = stv6110x->config;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+	struct i2c_msg msg[] = {
+		{ .addr = config->addr, .flags = 0, 	   .buf = b0, .len = 1 },
+		{ .addr = config->addr, .flags = I2C_M_RD, .buf = b1, .len = 1 }
+	};
+
+	ret = i2c_transfer(stv6110x->i2c, msg, 2);
+	if (ret != 2) {
+		dprintk(FE_ERROR, 1, "I/O Error");
+		return -EREMOTEIO;
+	}
+	*data = b1[0];
+
+	return 0;
+}
+
+static int stv6110x_write_reg(struct stv6110x_state *stv6110x, u8 reg, u8 data)
+{
+	int ret;
+	const struct stv6110x_config *config = stv6110x->config;
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = { .addr = config->addr, .flags = 0, . buf = buf, .len = 2 };
+
+	ret = i2c_transfer(stv6110x->i2c, &msg, 1);
+	if (ret != 1) {
+		dprintk(FE_ERROR, 1, "I/O Error");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int stv6110x_init(struct dvb_frontend *fe)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+	int ret;
+	u8 i;
+
+	for (i = 0; i < ARRAY_SIZE(stv6110x_regs); i++) {
+		ret = stv6110x_write_reg(stv6110x, i, stv6110x_regs[i]);
+		if (ret < 0) {
+			dprintk(FE_ERROR, 1, "Initialization failed");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int stv6110x_set_frequency(struct dvb_frontend *fe, u32 frequency)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+	u32 rDiv, divider;
+	s32 pVal, pCalc, rDivOpt = 0;
+	u8 i;
+
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_K, (REFCLOCK_MHz - 16));
+
+	if (frequency <= 1023000) {
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_DIV4SEL, 1);
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0);
+		pVal = 40;
+	} else if (frequency <= 1300000) {
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_DIV4SEL, 1);
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1);
+		pVal = 40;
+	} else if (frequency <= 2046000) {
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_DIV4SEL, 0);
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_PRESC32_ON, 0);
+		pVal = 20;
+	} else {
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_DIV4SEL, 0);
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_PRESC32_ON, 1);
+		pVal = 20;
+	}
+
+	for (rDiv = 0; rDiv <= 3; rDiv++) {
+		pCalc = (REFCLOCK_kHz / 100) / R_DIV(rDiv);
+
+		if ((abs((s32)(pCalc - pVal))) < (abs((s32)(1000 - pVal))))
+			rDivOpt = rDiv;
+	}
+
+	divider = (frequency * R_DIV(rDivOpt) * pVal) / REFCLOCK_kHz;
+	divider = (divider + 5) / 10;
+
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_R_DIV, rDivOpt);
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG1], TNG1_N_DIV_11_8, MSB(divider));
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_TNG0], TNG0_N_DIV_7_0, LSB(divider));
+
+	/* VCO Auto calibration */
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_STAT1], STAT1_CALVCO_STRT, 1);
+
+	stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x_regs[STV6110x_CTRL1]);
+	stv6110x_write_reg(stv6110x, STV6110x_TNG1, stv6110x_regs[STV6110x_TNG1]);
+	stv6110x_write_reg(stv6110x, STV6110x_TNG0, stv6110x_regs[STV6110x_TNG0]);
+	stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x_regs[STV6110x_STAT1]);
+
+	for (i = 0; i < TRIALS; i++) {
+		stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x_regs[STV6110x_STAT1]);
+		if (!STV6110x_GETFIELD(STAT1_CALVCO_STRT, stv6110x_regs[STV6110x_STAT1]))
+				break;
+		msleep(1);
+	}
+
+	return 0;
+}
+
+static int stv6110x_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+
+	stv6110x_read_reg(stv6110x, STV6110x_TNG1, &stv6110x_regs[STV6110x_TNG1]);
+	stv6110x_read_reg(stv6110x, STV6110x_TNG0, &stv6110x_regs[STV6110x_TNG0]);
+
+	*frequency = (MAKEWORD16(STV6110x_GETFIELD(TNG1_N_DIV_11_8, stv6110x_regs[STV6110x_TNG1]),
+				 STV6110x_GETFIELD(TNG0_N_DIV_7_0, stv6110x_regs[STV6110x_TNG0]))) * REFCLOCK_kHz;
+
+	*frequency /= (1 << (STV6110x_GETFIELD(TNG1_R_DIV, stv6110x_regs[STV6110x_TNG1]) +
+			     STV6110x_GETFIELD(TNG1_DIV4SEL, stv6110x_regs[STV6110x_TNG1])));
+
+	*frequency >>= 2;
+
+	return 0;
+}
+
+static int stv6110x_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+	u32 halfbw;
+	u8 i;
+
+	halfbw = bandwidth >> 1;
+
+	if (halfbw > 36000000)
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_CF, 31); /* LPF */
+	else if (halfbw < 5000000)
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_CF, 0); /* LPF */
+	else
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_CF, ((halfbw / 1000000) - 5)); /* LPF */
+
+
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x0); /* cal. clk activated */
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_STAT1], STAT1_CALRC_STRT, 0x1); /* LPF auto cal */
+
+	stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x_regs[STV6110x_CTRL3]);
+	stv6110x_write_reg(stv6110x, STV6110x_STAT1, stv6110x_regs[STV6110x_STAT1]);
+
+	for (i = 0; i < TRIALS; i++) {
+		stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x_regs[STV6110x_STAT1]);
+		if (!STV6110x_GETFIELD(STAT1_CALRC_STRT, stv6110x_regs[STV6110x_STAT1]))
+			break;
+		msleep(1);
+	}
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL3], CTRL3_RCCLK_OFF, 0x1); /* cal. done */
+	stv6110x_write_reg(stv6110x, STV6110x_CTRL3, stv6110x_regs[STV6110x_CTRL3]);
+
+	return 0;
+}
+
+static int stv6110x_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+
+	stv6110x_read_reg(stv6110x, STV6110x_CTRL3, &stv6110x_regs[STV6110x_CTRL3]);
+	*bandwidth = (STV6110x_GETFIELD(CTRL3_CF, stv6110x_regs[STV6110x_CTRL3]) + 5) * 2000000;
+
+	return 0;
+}
+
+static int stv6110x_set_refclock(struct dvb_frontend *fe, u32 refclock)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+
+	/* setup divider */
+	switch (refclock) {
+	default:
+	case 1:
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_CO_DIV, 0);
+		break;
+	case 2:
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_CO_DIV, 1);
+		break;
+	case 4:
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_CO_DIV, 2);
+		break;
+	case 8:
+	case 0:
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_CO_DIV, 3);
+		break;
+	}
+	stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x_regs[STV6110x_CTRL2]);
+
+	return 0;
+}
+
+static int stv6110x_get_bbgain(struct dvb_frontend *fe, u32 *gain)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+
+	stv6110x_read_reg(stv6110x, STV6110x_CTRL2, &stv6110x_regs[STV6110x_CTRL2]);
+	*gain = 2 * STV6110x_GETFIELD(CTRL2_BBGAIN, stv6110x_regs[STV6110x_CTRL2]);
+
+	return 0;
+}
+
+static int stv6110x_set_bbgain(struct dvb_frontend *fe, u32 gain)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+
+	STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL2], CTRL2_BBGAIN, gain / 2);
+	stv6110x_write_reg(stv6110x, STV6110x_CTRL2, stv6110x_regs[STV6110x_CTRL2]);
+
+	return 0;
+}
+
+static int stv6110x_set_mode(struct dvb_frontend *fe, enum tuner_mode mode)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+	int ret;
+
+	switch (mode) {
+	case TUNER_SLEEP:
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_SYN, 0);
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_RX, 0);
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_LPT, 0);
+		break;
+
+	case TUNER_WAKE:
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_SYN, 1);
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_RX, 1);
+		STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_LPT, 1);
+		break;
+	}
+
+	ret = stv6110x_write_reg(stv6110x, STV6110x_CTRL1, stv6110x_regs[STV6110x_CTRL1]);
+	if (ret < 0) {
+		dprintk(FE_ERROR, 1, "I/O Error");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int stv6110x_sleep(struct dvb_frontend *fe)
+{
+	return stv6110x_set_mode(fe, TUNER_SLEEP);
+}
+
+static int stv6110x_get_status(struct dvb_frontend *fe, u32 *status)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+
+	stv6110x_read_reg(stv6110x, STV6110x_STAT1, &stv6110x_regs[STV6110x_STAT1]);
+
+	if (STV6110x_GETFIELD(STAT1_LOCK, stv6110x_regs[STV6110x_STAT1]))
+		*status = TUNER_PHASELOCKED;
+	else
+		*status = 0;
+
+	return 0;
+}
+
+
+static int stv6110x_release(struct dvb_frontend *fe)
+{
+	struct stv6110x_state *stv6110x = fe->tuner_priv;
+
+	fe->tuner_priv = NULL;
+	kfree(stv6110x);
+
+	return 0;
+}
+
+static struct dvb_tuner_ops stv6110x_ops = {
+	.info = {
+		.name		= "STV6110(A) Silicon Tuner",
+		.frequency_min	=  950000,
+		.frequency_max	= 2150000,
+		.frequency_step	= 0,
+	},
+
+	.init			= stv6110x_init,
+	.sleep          	= stv6110x_sleep,
+	.release		= stv6110x_release
+};
+
+static struct stv6110x_devctl stv6110x_ctl = {
+	.tuner_init		= stv6110x_init,
+	.tuner_set_mode		= stv6110x_set_mode,
+	.tuner_set_frequency	= stv6110x_set_frequency,
+	.tuner_get_frequency	= stv6110x_get_frequency,
+	.tuner_set_bandwidth	= stv6110x_set_bandwidth,
+	.tuner_get_bandwidth	= stv6110x_get_bandwidth,
+	.tuner_set_bbgain	= stv6110x_set_bbgain,
+	.tuner_get_bbgain	= stv6110x_get_bbgain,
+	.tuner_set_refclk	= stv6110x_set_refclock,
+	.tuner_get_status	= stv6110x_get_status,
+};
+
+struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
+					const struct stv6110x_config *config,
+					struct i2c_adapter *i2c)
+{
+	struct stv6110x_state *stv6110x;
+
+	stv6110x = kzalloc(sizeof (struct stv6110x_state), GFP_KERNEL);
+	if (stv6110x == NULL)
+		goto error;
+
+	stv6110x->i2c		= i2c;
+	stv6110x->config	= config;
+	stv6110x->devctl	= &stv6110x_ctl;
+
+	fe->tuner_priv		= stv6110x;
+	fe->ops.tuner_ops	= stv6110x_ops;
+
+	printk("%s: Attaching STV6110x \n", __func__);
+	return stv6110x->devctl;
+
+error:
+	kfree(stv6110x);
+	return NULL;
+}
+EXPORT_SYMBOL(stv6110x_attach);
+
+MODULE_AUTHOR("Manu Abraham");
+MODULE_DESCRIPTION("STV6110x Silicon tuner");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/stv6110x.h b/drivers/media/dvb/frontends/stv6110x.h
new file mode 100644
index 00000000000..a38257080e0
--- /dev/null
+++ b/drivers/media/dvb/frontends/stv6110x.h
@@ -0,0 +1,71 @@
+/*
+	STV6110(A) Silicon tuner driver
+
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __STV6110x_H
+#define __STV6110x_H
+
+struct stv6110x_config {
+	u8	addr;
+	u32	refclk;
+};
+
+enum tuner_mode {
+	TUNER_SLEEP = 1,
+	TUNER_WAKE,
+};
+
+enum tuner_status {
+	TUNER_PHASELOCKED = 1,
+};
+
+struct stv6110x_devctl {
+	int (*tuner_init) (struct dvb_frontend *fe);
+	int (*tuner_set_mode) (struct dvb_frontend *fe, enum tuner_mode mode);
+	int (*tuner_set_frequency) (struct dvb_frontend *fe, u32 frequency);
+	int (*tuner_get_frequency) (struct dvb_frontend *fe, u32 *frequency);
+	int (*tuner_set_bandwidth) (struct dvb_frontend *fe, u32 bandwidth);
+	int (*tuner_get_bandwidth) (struct dvb_frontend *fe, u32 *bandwidth);
+	int (*tuner_set_bbgain) (struct dvb_frontend *fe, u32 gain);
+	int (*tuner_get_bbgain) (struct dvb_frontend *fe, u32 *gain);
+	int (*tuner_set_refclk)  (struct dvb_frontend *fe, u32 refclk);
+	int (*tuner_get_status) (struct dvb_frontend *fe, u32 *status);
+};
+
+
+#if defined(CONFIG_DVB_STV6110x) || (defined(CONFIG_DVB_STV6110x_MODULE) && defined(MODULE))
+
+extern struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
+					       const struct stv6110x_config *config,
+					       struct i2c_adapter *i2c);
+
+#else
+static inline struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
+						      const struct stv6110x_config *config,
+						      struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+#endif /* CONFIG_DVB_STV6110x */
+
+#endif /* __STV6110x_H */
diff --git a/drivers/media/dvb/frontends/stv6110x_priv.h b/drivers/media/dvb/frontends/stv6110x_priv.h
new file mode 100644
index 00000000000..7260da633d4
--- /dev/null
+++ b/drivers/media/dvb/frontends/stv6110x_priv.h
@@ -0,0 +1,75 @@
+/*
+	STV6110(A) Silicon tuner driver
+
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __STV6110x_PRIV_H
+#define __STV6110x_PRIV_H
+
+#define FE_ERROR				0
+#define FE_NOTICE				1
+#define FE_INFO					2
+#define FE_DEBUG				3
+#define FE_DEBUGREG				4
+
+#define dprintk(__y, __z, format, arg...) do {						\
+	if (__z) {									\
+		if	((verbose > FE_ERROR) && (verbose > __y))			\
+			printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);		\
+		else if	((verbose > FE_NOTICE) && (verbose > __y))			\
+			printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);	\
+		else if ((verbose > FE_INFO) && (verbose > __y))			\
+			printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);		\
+		else if ((verbose > FE_DEBUG) && (verbose > __y))			\
+			printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);	\
+	} else {									\
+		if (verbose > __y)							\
+			printk(format, ##arg);						\
+	}										\
+} while (0)
+
+
+#define STV6110x_SETFIELD(mask, bitf, val)				\
+	(mask = (mask & (~(((1 << STV6110x_WIDTH_##bitf) - 1) <<	\
+				  STV6110x_OFFST_##bitf))) | 		\
+			  (val << STV6110x_OFFST_##bitf))
+
+#define STV6110x_GETFIELD(bitf, val)					\
+	((val >> STV6110x_OFFST_##bitf) & 				\
+	((1 << STV6110x_WIDTH_##bitf) - 1))
+
+#define MAKEWORD16(a, b)			(((a) << 8) | (b))
+
+#define LSB(x)					((x & 0xff))
+#define MSB(y)					((y >> 8) & 0xff)
+
+#define TRIALS					10
+#define R_DIV(__div)				(1 << (__div + 1))
+#define REFCLOCK_kHz				(stv6110x->config->refclk /    1000)
+#define REFCLOCK_MHz				(stv6110x->config->refclk / 1000000)
+
+struct stv6110x_state {
+	struct i2c_adapter		*i2c;
+	const struct stv6110x_config	*config;
+
+	struct stv6110x_devctl		*devctl;
+};
+
+#endif /* __STV6110x_PRIV_H */
diff --git a/drivers/media/dvb/frontends/stv6110x_reg.h b/drivers/media/dvb/frontends/stv6110x_reg.h
new file mode 100644
index 00000000000..93e5c70e5fd
--- /dev/null
+++ b/drivers/media/dvb/frontends/stv6110x_reg.h
@@ -0,0 +1,82 @@
+/*
+	STV6110(A) Silicon tuner driver
+
+	Copyright (C) Manu Abraham <abraham.manu@gmail.com>
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __STV6110x_REG_H
+#define __STV6110x_REG_H
+
+#define STV6110x_CTRL1				0x00
+#define STV6110x_OFFST_CTRL1_K			3
+#define STV6110x_WIDTH_CTRL1_K			5
+#define STV6110x_OFFST_CTRL1_LPT		2
+#define STV6110x_WIDTH_CTRL1_LPT		1
+#define STV6110x_OFFST_CTRL1_RX			1
+#define STV6110x_WIDTH_CTRL1_RX			1
+#define STV6110x_OFFST_CTRL1_SYN		0
+#define STV6110x_WIDTH_CTRL1_SYN		1
+
+#define STV6110x_CTRL2				0x01
+#define STV6110x_OFFST_CTRL2_CO_DIV		6
+#define STV6110x_WIDTH_CTRL2_CO_DIV		2
+#define STV6110x_OFFST_CTRL2_RSVD		5
+#define STV6110x_WIDTH_CTRL2_RSVD		1
+#define STV6110x_OFFST_CTRL2_REFOUT_SEL		4
+#define STV6110x_WIDTH_CTRL2_REFOUT_SEL		1
+#define STV6110x_OFFST_CTRL2_BBGAIN		0
+#define STV6110x_WIDTH_CTRL2_BBGAIN		4
+
+#define STV6110x_TNG0				0x02
+#define STV6110x_OFFST_TNG0_N_DIV_7_0		0
+#define STV6110x_WIDTH_TNG0_N_DIV_7_0		8
+
+#define STV6110x_TNG1				0x03
+#define STV6110x_OFFST_TNG1_R_DIV		6
+#define STV6110x_WIDTH_TNG1_R_DIV		2
+#define STV6110x_OFFST_TNG1_PRESC32_ON		5
+#define STV6110x_WIDTH_TNG1_PRESC32_ON		1
+#define STV6110x_OFFST_TNG1_DIV4SEL		4
+#define STV6110x_WIDTH_TNG1_DIV4SEL		1
+#define STV6110x_OFFST_TNG1_N_DIV_11_8		0
+#define STV6110x_WIDTH_TNG1_N_DIV_11_8		4
+
+
+#define STV6110x_CTRL3				0x04
+#define STV6110x_OFFST_CTRL3_DCLOOP_OFF		7
+#define STV6110x_WIDTH_CTRL3_DCLOOP_OFF		1
+#define STV6110x_OFFST_CTRL3_RCCLK_OFF		6
+#define STV6110x_WIDTH_CTRL3_RCCLK_OFF		1
+#define STV6110x_OFFST_CTRL3_ICP		5
+#define STV6110x_WIDTH_CTRL3_ICP		1
+#define STV6110x_OFFST_CTRL3_CF			0
+#define STV6110x_WIDTH_CTRL3_CF			5
+
+#define STV6110x_STAT1				0x05
+#define STV6110x_OFFST_STAT1_CALVCO_STRT	2
+#define STV6110x_WIDTH_STAT1_CALVCO_STRT	1
+#define STV6110x_OFFST_STAT1_CALRC_STRT		1
+#define STV6110x_WIDTH_STAT1_CALRC_STRT		1
+#define STV6110x_OFFST_STAT1_LOCK		0
+#define STV6110x_WIDTH_STAT1_LOCK		1
+
+#define STV6110x_STAT2				0x06
+#define STV6110x_STAT3				0x07
+
+#endif /* __STV6110x_REG_H */
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 2a8bbcd44cd..4302c563a6b 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -1,7 +1,7 @@
 /*
     NXP TDA10048HN DVB OFDM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
+    Copyright (C) 2009 Steven Toth <stoth@kernellabs.com>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -25,6 +25,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <asm/div64.h>
 #include "dvb_frontend.h"
 #include "dvb_math.h"
 #include "tda10048.h"
@@ -138,11 +139,20 @@ struct tda10048_state {
 
 	struct i2c_adapter *i2c;
 
-	/* configuration settings */
-	const struct tda10048_config *config;
+	/* We'll cache and update the attach config settings */
+	struct tda10048_config config;
 	struct dvb_frontend frontend;
 
 	int fwloaded;
+
+	u32 freq_if_hz;
+	u32 xtal_hz;
+	u32 pll_mfactor;
+	u32 pll_nfactor;
+	u32 pll_pfactor;
+	u32 sample_freq;
+
+	enum fe_bandwidth bandwidth;
 };
 
 static struct init_tab {
@@ -192,12 +202,26 @@ static struct init_tab {
 	{ TDA10048_CONF_C4_2, 0x04 },
 };
 
+static struct pll_tab {
+	u32	clk_freq_khz;
+	u32	if_freq_khz;
+	u8	m, n, p;
+} pll_tab[] = {
+	{ TDA10048_CLK_4000,  TDA10048_IF_36130, 10, 0, 0 },
+	{ TDA10048_CLK_16000, TDA10048_IF_3300,  10, 3, 0 },
+	{ TDA10048_CLK_16000, TDA10048_IF_3500,  10, 3, 0 },
+	{ TDA10048_CLK_16000, TDA10048_IF_4000,  10, 3, 0 },
+	{ TDA10048_CLK_16000, TDA10048_IF_4300,  10, 3, 0 },
+	{ TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 },
+};
+
 static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
 {
+	struct tda10048_config *config = &state->config;
 	int ret;
 	u8 buf[] = { reg, data };
 	struct i2c_msg msg = {
-		.addr = state->config->demod_address,
+		.addr = config->demod_address,
 		.flags = 0, .buf = buf, .len = 2 };
 
 	dprintk(2, "%s(reg = 0x%02x, data = 0x%02x)\n", __func__, reg, data);
@@ -212,13 +236,14 @@ static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
 
 static u8 tda10048_readreg(struct tda10048_state *state, u8 reg)
 {
+	struct tda10048_config *config = &state->config;
 	int ret;
 	u8 b0[] = { reg };
 	u8 b1[] = { 0 };
 	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address,
+		{ .addr = config->demod_address,
 			.flags = 0, .buf = b0, .len = 1 },
-		{ .addr = state->config->demod_address,
+		{ .addr = config->demod_address,
 			.flags = I2C_M_RD, .buf = b1, .len = 1 } };
 
 	dprintk(2, "%s(reg = 0x%02x)\n", __func__, reg);
@@ -235,6 +260,7 @@ static u8 tda10048_readreg(struct tda10048_state *state, u8 reg)
 static int tda10048_writeregbulk(struct tda10048_state *state, u8 reg,
 				 const u8 *data, u16 len)
 {
+	struct tda10048_config *config = &state->config;
 	int ret = -EREMOTEIO;
 	struct i2c_msg msg;
 	u8 *buf;
@@ -250,7 +276,7 @@ static int tda10048_writeregbulk(struct tda10048_state *state, u8 reg,
 	*buf = reg;
 	memcpy(buf + 1, data, len);
 
-	msg.addr = state->config->demod_address;
+	msg.addr = config->demod_address;
 	msg.flags = 0;
 	msg.buf = buf;
 	msg.len = len + 1;
@@ -271,14 +297,206 @@ error:
 	return ret;
 }
 
+static int tda10048_set_phy2(struct dvb_frontend *fe, u32 sample_freq_hz,
+			     u32 if_hz)
+{
+	struct tda10048_state *state = fe->demodulator_priv;
+	u64 t;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (sample_freq_hz == 0)
+		return -EINVAL;
+
+	if (if_hz < (sample_freq_hz / 2)) {
+		/* PHY2 = (if2/fs) * 2^15 */
+		t = if_hz;
+		t *= 10;
+		t *= 32768;
+		do_div(t, sample_freq_hz);
+		t += 5;
+		do_div(t, 10);
+	} else {
+		/* PHY2 = ((IF1-fs)/fs) * 2^15 */
+		t = sample_freq_hz - if_hz;
+		t *= 10;
+		t *= 32768;
+		do_div(t, sample_freq_hz);
+		t += 5;
+		do_div(t, 10);
+		t = ~t + 1;
+	}
+
+	tda10048_writereg(state, TDA10048_FREQ_PHY2_LSB, (u8)t);
+	tda10048_writereg(state, TDA10048_FREQ_PHY2_MSB, (u8)(t >> 8));
+
+	return 0;
+}
+
+static int tda10048_set_wref(struct dvb_frontend *fe, u32 sample_freq_hz,
+			     u32 bw)
+{
+	struct tda10048_state *state = fe->demodulator_priv;
+	u64 t, z;
+	u32 b = 8000000;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (sample_freq_hz == 0)
+		return -EINVAL;
+
+	if (bw == BANDWIDTH_6_MHZ)
+		b = 6000000;
+	else
+	if (bw == BANDWIDTH_7_MHZ)
+		b = 7000000;
+
+	/* WREF = (B / (7 * fs)) * 2^31 */
+	t = b * 10;
+	/* avoid warning: this decimal constant is unsigned only in ISO C90 */
+	/* t *= 2147483648 on 32bit platforms */
+	t *= (2048 * 1024);
+	t *= 1024;
+	z = 7 * sample_freq_hz;
+	do_div(t, z);
+	t += 5;
+	do_div(t, 10);
+
+	tda10048_writereg(state, TDA10048_TIME_WREF_LSB, (u8)t);
+	tda10048_writereg(state, TDA10048_TIME_WREF_MID1, (u8)(t >> 8));
+	tda10048_writereg(state, TDA10048_TIME_WREF_MID2, (u8)(t >> 16));
+	tda10048_writereg(state, TDA10048_TIME_WREF_MSB, (u8)(t >> 24));
+
+	return 0;
+}
+
+static int tda10048_set_invwref(struct dvb_frontend *fe, u32 sample_freq_hz,
+				u32 bw)
+{
+	struct tda10048_state *state = fe->demodulator_priv;
+	u64 t;
+	u32 b = 8000000;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (sample_freq_hz == 0)
+		return -EINVAL;
+
+	if (bw == BANDWIDTH_6_MHZ)
+		b = 6000000;
+	else
+	if (bw == BANDWIDTH_7_MHZ)
+		b = 7000000;
+
+	/* INVWREF = ((7 * fs) / B) * 2^5 */
+	t = sample_freq_hz;
+	t *= 7;
+	t *= 32;
+	t *= 10;
+	do_div(t, b);
+	t += 5;
+	do_div(t, 10);
+
+	tda10048_writereg(state, TDA10048_TIME_INVWREF_LSB, (u8)t);
+	tda10048_writereg(state, TDA10048_TIME_INVWREF_MSB, (u8)(t >> 8));
+
+	return 0;
+}
+
+static int tda10048_set_bandwidth(struct dvb_frontend *fe,
+	enum fe_bandwidth bw)
+{
+	struct tda10048_state *state = fe->demodulator_priv;
+	dprintk(1, "%s(bw=%d)\n", __func__, bw);
+
+	/* Bandwidth setting may need to be adjusted */
+	switch (bw) {
+	case BANDWIDTH_6_MHZ:
+	case BANDWIDTH_7_MHZ:
+	case BANDWIDTH_8_MHZ:
+		tda10048_set_wref(fe, state->sample_freq, bw);
+		tda10048_set_invwref(fe, state->sample_freq, bw);
+		break;
+	default:
+		printk(KERN_ERR "%s() invalid bandwidth\n", __func__);
+		return -EINVAL;
+	}
+
+	state->bandwidth = bw;
+
+	return 0;
+}
+
+static int tda10048_set_if(struct dvb_frontend *fe, enum fe_bandwidth bw)
+{
+	struct tda10048_state *state = fe->demodulator_priv;
+	struct tda10048_config *config = &state->config;
+	int i;
+	u32 if_freq_khz;
+
+	dprintk(1, "%s(bw = %d)\n", __func__, bw);
+
+	/* based on target bandwidth and clk we calculate pll factors */
+	switch (bw) {
+	case BANDWIDTH_6_MHZ:
+		if_freq_khz = config->dtv6_if_freq_khz;
+		break;
+	case BANDWIDTH_7_MHZ:
+		if_freq_khz = config->dtv7_if_freq_khz;
+		break;
+	case BANDWIDTH_8_MHZ:
+		if_freq_khz = config->dtv8_if_freq_khz;
+		break;
+	default:
+		printk(KERN_ERR "%s() no default\n", __func__);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pll_tab); i++) {
+		if ((pll_tab[i].clk_freq_khz == config->clk_freq_khz) &&
+			(pll_tab[i].if_freq_khz == if_freq_khz)) {
+
+			state->freq_if_hz = pll_tab[i].if_freq_khz * 1000;
+			state->xtal_hz = pll_tab[i].clk_freq_khz * 1000;
+			state->pll_mfactor = pll_tab[i].m;
+			state->pll_nfactor = pll_tab[i].n;
+			state->pll_pfactor = pll_tab[i].p;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(pll_tab)) {
+		printk(KERN_ERR "%s() Incorrect attach settings\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	dprintk(1, "- freq_if_hz = %d\n", state->freq_if_hz);
+	dprintk(1, "- xtal_hz = %d\n", state->xtal_hz);
+	dprintk(1, "- pll_mfactor = %d\n", state->pll_mfactor);
+	dprintk(1, "- pll_nfactor = %d\n", state->pll_nfactor);
+	dprintk(1, "- pll_pfactor = %d\n", state->pll_pfactor);
+
+	/* Calculate the sample frequency */
+	state->sample_freq = state->xtal_hz * (state->pll_mfactor + 45);
+	state->sample_freq /= (state->pll_nfactor + 1);
+	state->sample_freq /= (state->pll_pfactor + 4);
+	dprintk(1, "- sample_freq = %d\n", state->sample_freq);
+
+	/* Update the I/F */
+	tda10048_set_phy2(fe, state->sample_freq, state->freq_if_hz);
+
+	return 0;
+}
+
 static int tda10048_firmware_upload(struct dvb_frontend *fe)
 {
 	struct tda10048_state *state = fe->demodulator_priv;
+	struct tda10048_config *config = &state->config;
 	const struct firmware *fw;
 	int ret;
 	int pos = 0;
 	int cnt;
-	u8 wlen = state->config->fwbulkwritelen;
+	u8 wlen = config->fwbulkwritelen;
 
 	if ((wlen != TDA10048_BULKWRITE_200) && (wlen != TDA10048_BULKWRITE_50))
 		wlen = TDA10048_BULKWRITE_200;
@@ -289,7 +507,7 @@ static int tda10048_firmware_upload(struct dvb_frontend *fe)
 		TDA10048_DEFAULT_FIRMWARE);
 
 	ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE,
-		&state->i2c->dev);
+		state->i2c->dev.parent);
 	if (ret) {
 		printk(KERN_ERR "%s: Upload failed. (file not found?)\n",
 			__func__);
@@ -484,8 +702,12 @@ static int tda10048_get_tps(struct tda10048_state *state,
 static int tda10048_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
 {
 	struct tda10048_state *state = fe->demodulator_priv;
+	struct tda10048_config *config = &state->config;
 	dprintk(1, "%s(%d)\n", __func__, enable);
 
+	if (config->disable_gate_access)
+		return 0;
+
 	if (enable)
 		return tda10048_writereg(state, TDA10048_CONF_C4_1,
 			tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x02);
@@ -523,6 +745,12 @@ static int tda10048_set_frontend(struct dvb_frontend *fe,
 
 	dprintk(1, "%s(frequency=%d)\n", __func__, p->frequency);
 
+	/* Update the I/F pll's if the bandwidth changes */
+	if (p->u.ofdm.bandwidth != state->bandwidth) {
+		tda10048_set_if(fe, p->u.ofdm.bandwidth);
+		tda10048_set_bandwidth(fe, p->u.ofdm.bandwidth);
+	}
+
 	if (fe->ops.tuner_ops.set_params) {
 
 		if (fe->ops.i2c_gate_ctrl)
@@ -544,6 +772,7 @@ static int tda10048_set_frontend(struct dvb_frontend *fe,
 static int tda10048_init(struct dvb_frontend *fe)
 {
 	struct tda10048_state *state = fe->demodulator_priv;
+	struct tda10048_config *config = &state->config;
 	int ret = 0, i;
 
 	dprintk(1, "%s()\n", __func__);
@@ -556,10 +785,14 @@ static int tda10048_init(struct dvb_frontend *fe)
 		ret = tda10048_firmware_upload(fe);
 
 	/* Set either serial or parallel */
-	tda10048_output_mode(fe, state->config->output_mode);
+	tda10048_output_mode(fe, config->output_mode);
+
+	/* Set inversion */
+	tda10048_set_inversion(fe, config->inversion);
 
-	/* set inversion */
-	tda10048_set_inversion(fe, state->config->inversion);
+	/* Establish default RF values */
+	tda10048_set_if(fe, BANDWIDTH_8_MHZ);
+	tda10048_set_bandwidth(fe, BANDWIDTH_8_MHZ);
 
 	/* Ensure we leave the gate closed */
 	tda10048_i2c_gate_ctrl(fe, 0);
@@ -812,6 +1045,45 @@ static void tda10048_release(struct dvb_frontend *fe)
 	kfree(state);
 }
 
+static void tda10048_establish_defaults(struct dvb_frontend *fe)
+{
+	struct tda10048_state *state = fe->demodulator_priv;
+	struct tda10048_config *config = &state->config;
+
+	/* Validate/default the config */
+	if (config->dtv6_if_freq_khz == 0) {
+		config->dtv6_if_freq_khz = TDA10048_IF_4300;
+		printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz "
+			"is not set (defaulting to %d)\n",
+			__func__,
+			config->dtv6_if_freq_khz);
+	}
+
+	if (config->dtv7_if_freq_khz == 0) {
+		config->dtv7_if_freq_khz = TDA10048_IF_4300;
+		printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz "
+			"is not set (defaulting to %d)\n",
+			__func__,
+			config->dtv7_if_freq_khz);
+	}
+
+	if (config->dtv8_if_freq_khz == 0) {
+		config->dtv8_if_freq_khz = TDA10048_IF_4300;
+		printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz "
+			"is not set (defaulting to %d)\n",
+			__func__,
+			config->dtv8_if_freq_khz);
+	}
+
+	if (config->clk_freq_khz == 0) {
+		config->clk_freq_khz = TDA10048_CLK_16000;
+		printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz "
+			"is not set (defaulting to %d)\n",
+			__func__,
+			config->clk_freq_khz);
+	}
+}
+
 static struct dvb_frontend_ops tda10048_ops;
 
 struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
@@ -826,10 +1098,11 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
 	if (state == NULL)
 		goto error;
 
-	/* setup the state */
-	state->config = config;
+	/* setup the state and clone the config */
+	memcpy(&state->config, config, sizeof(*config));
 	state->i2c = i2c;
 	state->fwloaded = 0;
+	state->bandwidth = BANDWIDTH_8_MHZ;
 
 	/* check if the demod is present */
 	if (tda10048_readreg(state, TDA10048_IDENTITY) != 0x048)
@@ -840,6 +1113,17 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
 		sizeof(struct dvb_frontend_ops));
 	state->frontend.demodulator_priv = state;
 
+	/* Establish any defaults the the user didn't pass */
+	tda10048_establish_defaults(&state->frontend);
+
+	/* Set the xtal and freq defaults */
+	if (tda10048_set_if(&state->frontend, BANDWIDTH_8_MHZ) != 0)
+		goto error;
+
+	/* Default bandwidth */
+	if (tda10048_set_bandwidth(&state->frontend, BANDWIDTH_8_MHZ) != 0)
+		goto error;
+
 	/* Leave the gate closed */
 	tda10048_i2c_gate_ctrl(&state->frontend, 0);
 
diff --git a/drivers/media/dvb/frontends/tda10048.h b/drivers/media/dvb/frontends/tda10048.h
index 0457b24601f..8828ceaf74b 100644
--- a/drivers/media/dvb/frontends/tda10048.h
+++ b/drivers/media/dvb/frontends/tda10048.h
@@ -1,7 +1,7 @@
 /*
     NXP TDA10048HN DVB OFDM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
+    Copyright (C) 2009 Steven Toth <stoth@kernellabs.com>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -43,6 +43,25 @@ struct tda10048_config {
 #define TDA10048_INVERSION_OFF 0
 #define TDA10048_INVERSION_ON  1
 	u8 inversion;
+
+#define TDA10048_IF_3300  3300
+#define TDA10048_IF_3500  3500
+#define TDA10048_IF_3800  3800
+#define TDA10048_IF_4000  4000
+#define TDA10048_IF_4300  4300
+#define TDA10048_IF_4500  4500
+#define TDA10048_IF_4750  4750
+#define TDA10048_IF_36130 36130
+	u16 dtv6_if_freq_khz;
+	u16 dtv7_if_freq_khz;
+	u16 dtv8_if_freq_khz;
+
+#define TDA10048_CLK_4000  4000
+#define TDA10048_CLK_16000 16000
+	u16 clk_freq_khz;
+
+	/* Disable I2C gate access */
+	u8 disable_gate_access;
 };
 
 #if defined(CONFIG_DVB_TDA10048) || \
diff --git a/drivers/media/dvb/siano/Makefile b/drivers/media/dvb/siano/Makefile
index bcf93f4828b..c6644d90943 100644
--- a/drivers/media/dvb/siano/Makefile
+++ b/drivers/media/dvb/siano/Makefile
@@ -1,4 +1,4 @@
-sms1xxx-objs := smscoreapi.o sms-cards.o
+sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
 
 obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o
 obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index 63e4d0ec658..d8b15d583bd 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -18,6 +18,7 @@
  */
 
 #include "sms-cards.h"
+#include "smsir.h"
 
 static int sms_dbg;
 module_param_named(cards_dbg, sms_dbg, int, 0644);
@@ -30,17 +31,14 @@ static struct sms_board sms_boards[] = {
 	[SMS1XXX_BOARD_SIANO_STELLAR] = {
 		.name	= "Siano Stellar Digital Receiver",
 		.type	= SMS_STELLAR,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw",
 	},
 	[SMS1XXX_BOARD_SIANO_NOVA_A] = {
 		.name	= "Siano Nova A Digital Receiver",
 		.type	= SMS_NOVA_A0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw",
 	},
 	[SMS1XXX_BOARD_SIANO_NOVA_B] = {
 		.name	= "Siano Nova B Digital Receiver",
 		.type	= SMS_NOVA_B0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw",
 	},
 	[SMS1XXX_BOARD_SIANO_VEGA] = {
 		.name	= "Siano Vega Digital Receiver",
@@ -65,6 +63,9 @@ static struct sms_board sms_boards[] = {
 		.name	= "Hauppauge WinTV MiniStick",
 		.type	= SMS_NOVA_B0,
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
+		.board_cfg.leds_power = 26,
+		.board_cfg.led0 = 27,
+		.board_cfg.led1 = 28,
 		.led_power = 26,
 		.led_lo    = 27,
 		.led_hi    = 28,
@@ -74,7 +75,9 @@ static struct sms_board sms_boards[] = {
 		.type	= SMS_NOVA_B0,
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
 		.lna_ctrl  = 29,
+		.board_cfg.foreign_lna0_ctrl = 29,
 		.rf_switch = 17,
+		.board_cfg.rf_switch_uhf = 17,
 	},
 	[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
 		.name	= "Hauppauge WinTV MiniCard",
@@ -82,6 +85,16 @@ static struct sms_board sms_boards[] = {
 		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
 		.lna_ctrl  = -1,
 	},
+	[SMS1XXX_BOARD_SIANO_NICE] = {
+	/* 11 */
+		.name = "Siano Nice Digital Receiver",
+		.type = SMS_NOVA_B0,
+	},
+	[SMS1XXX_BOARD_SIANO_VENICE] = {
+	/* 12 */
+		.name = "Siano Venice Digital Receiver",
+		.type = SMS_VEGA,
+	},
 };
 
 struct sms_board *sms_get_board(int id)
@@ -91,12 +104,179 @@ struct sms_board *sms_get_board(int id)
 	return &sms_boards[id];
 }
 EXPORT_SYMBOL_GPL(sms_get_board);
+static inline void sms_gpio_assign_11xx_default_led_config(
+		struct smscore_gpio_config *pGpioConfig) {
+	pGpioConfig->Direction = SMS_GPIO_DIRECTION_OUTPUT;
+	pGpioConfig->InputCharacteristics =
+		SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL;
+	pGpioConfig->OutputDriving = SMS_GPIO_OUTPUT_DRIVING_4mA;
+	pGpioConfig->OutputSlewRate = SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS;
+	pGpioConfig->PullUpDown = SMS_GPIO_PULL_UP_DOWN_NONE;
+}
+
+int sms_board_event(struct smscore_device_t *coredev,
+		enum SMS_BOARD_EVENTS gevent) {
+	int board_id = smscore_get_board_id(coredev);
+	struct sms_board *board = sms_get_board(board_id);
+	struct smscore_gpio_config MyGpioConfig;
+
+	sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
+
+	switch (gevent) {
+	case BOARD_EVENT_POWER_INIT: /* including hotplug */
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			/* set I/O and turn off all LEDs */
+			smscore_gpio_configure(coredev,
+					board->board_cfg.leds_power,
+					&MyGpioConfig);
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.leds_power, 0);
+			smscore_gpio_configure(coredev, board->board_cfg.led0,
+					&MyGpioConfig);
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.led0, 0);
+			smscore_gpio_configure(coredev, board->board_cfg.led1,
+					&MyGpioConfig);
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.led1, 0);
+			break;
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+			/* set I/O and turn off LNA */
+			smscore_gpio_configure(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					&MyGpioConfig);
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					0);
+			break;
+		}
+		break; /* BOARD_EVENT_BIND */
+
+	case BOARD_EVENT_POWER_SUSPEND:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.leds_power, 0);
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led0, 0);
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 0);
+			break;
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					0);
+			break;
+		}
+		break; /* BOARD_EVENT_POWER_SUSPEND */
+
+	case BOARD_EVENT_POWER_RESUME:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.leds_power, 1);
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led0, 1);
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 0);
+			break;
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					1);
+			break;
+		}
+		break; /* BOARD_EVENT_POWER_RESUME */
+
+	case BOARD_EVENT_BIND:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+				board->board_cfg.leds_power, 1);
+			smscore_gpio_set_level(coredev,
+				board->board_cfg.led0, 1);
+			smscore_gpio_set_level(coredev,
+				board->board_cfg.led1, 0);
+			break;
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
+		case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+			smscore_gpio_set_level(coredev,
+					board->board_cfg.foreign_lna0_ctrl,
+					1);
+			break;
+		}
+		break; /* BOARD_EVENT_BIND */
+
+	case BOARD_EVENT_SCAN_PROG:
+		break; /* BOARD_EVENT_SCAN_PROG */
+	case BOARD_EVENT_SCAN_COMP:
+		break; /* BOARD_EVENT_SCAN_COMP */
+	case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
+		break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
+	case BOARD_EVENT_FE_LOCK:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+			board->board_cfg.led1, 1);
+			break;
+		}
+		break; /* BOARD_EVENT_FE_LOCK */
+	case BOARD_EVENT_FE_UNLOCK:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 0);
+			break;
+		}
+		break; /* BOARD_EVENT_FE_UNLOCK */
+	case BOARD_EVENT_DEMOD_LOCK:
+		break; /* BOARD_EVENT_DEMOD_LOCK */
+	case BOARD_EVENT_DEMOD_UNLOCK:
+		break; /* BOARD_EVENT_DEMOD_UNLOCK */
+	case BOARD_EVENT_RECEPTION_MAX_4:
+		break; /* BOARD_EVENT_RECEPTION_MAX_4 */
+	case BOARD_EVENT_RECEPTION_3:
+		break; /* BOARD_EVENT_RECEPTION_3 */
+	case BOARD_EVENT_RECEPTION_2:
+		break; /* BOARD_EVENT_RECEPTION_2 */
+	case BOARD_EVENT_RECEPTION_1:
+		break; /* BOARD_EVENT_RECEPTION_1 */
+	case BOARD_EVENT_RECEPTION_LOST_0:
+		break; /* BOARD_EVENT_RECEPTION_LOST_0 */
+	case BOARD_EVENT_MULTIPLEX_OK:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 1);
+			break;
+		}
+		break; /* BOARD_EVENT_MULTIPLEX_OK */
+	case BOARD_EVENT_MULTIPLEX_ERRORS:
+		switch (board_id) {
+		case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+			smscore_gpio_set_level(coredev,
+						board->board_cfg.led1, 0);
+			break;
+		}
+		break; /* BOARD_EVENT_MULTIPLEX_ERRORS */
+
+	default:
+		sms_err("Unknown SMS board event");
+		break;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sms_board_event);
 
 static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable)
 {
 	int lvl, ret;
 	u32 gpio;
-	struct smscore_gpio_config gpioconfig = {
+	struct smscore_config_gpio gpioconfig = {
 		.direction            = SMS_GPIO_DIRECTION_OUTPUT,
 		.pullupdown           = SMS_GPIO_PULLUPDOWN_NONE,
 		.inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL,
diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/dvb/siano/sms-cards.h
index 64d74c59c33..38f062f6ad6 100644
--- a/drivers/media/dvb/siano/sms-cards.h
+++ b/drivers/media/dvb/siano/sms-cards.h
@@ -22,6 +22,7 @@
 
 #include <linux/usb.h>
 #include "smscoreapi.h"
+#include "smsir.h"
 
 #define SMS_BOARD_UNKNOWN 0
 #define SMS1XXX_BOARD_SIANO_STELLAR 1
@@ -34,10 +35,47 @@
 #define SMS1XXX_BOARD_HAUPPAUGE_WINDHAM 8
 #define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD 9
 #define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10
+#define SMS1XXX_BOARD_SIANO_NICE	11
+#define SMS1XXX_BOARD_SIANO_VENICE	12
+
+struct sms_board_gpio_cfg {
+	int lna_vhf_exist;
+	int lna_vhf_ctrl;
+	int lna_uhf_exist;
+	int lna_uhf_ctrl;
+	int lna_uhf_d_ctrl;
+	int lna_sband_exist;
+	int lna_sband_ctrl;
+	int lna_sband_d_ctrl;
+	int foreign_lna0_ctrl;
+	int foreign_lna1_ctrl;
+	int foreign_lna2_ctrl;
+	int rf_switch_vhf;
+	int rf_switch_uhf;
+	int rf_switch_sband;
+	int leds_power;
+	int led0;
+	int led1;
+	int led2;
+	int led3;
+	int led4;
+	int ir;
+	int eeprom_wp;
+	int mrc_sense;
+	int mrc_pdn_resetn;
+	int mrc_gp0; /* mrcs spi int */
+	int mrc_gp1;
+	int mrc_gp2;
+	int mrc_gp3;
+	int mrc_gp4;
+	int host_spi_gsp_ts_int;
+};
 
 struct sms_board {
 	enum sms_device_type_st type;
 	char *name, *fw[DEVICE_MODE_MAX];
+	struct sms_board_gpio_cfg board_cfg;
+	enum ir_kb_type ir_kb_type;
 
 	/* gpios */
 	int led_power, led_hi, led_lo, lna_ctrl, rf_switch;
@@ -45,6 +83,32 @@ struct sms_board {
 
 struct sms_board *sms_get_board(int id);
 
+extern struct smscore_device_t *coredev;
+
+enum SMS_BOARD_EVENTS {
+	BOARD_EVENT_POWER_INIT,
+	BOARD_EVENT_POWER_SUSPEND,
+	BOARD_EVENT_POWER_RESUME,
+	BOARD_EVENT_BIND,
+	BOARD_EVENT_SCAN_PROG,
+	BOARD_EVENT_SCAN_COMP,
+	BOARD_EVENT_EMERGENCY_WARNING_SIGNAL,
+	BOARD_EVENT_FE_LOCK,
+	BOARD_EVENT_FE_UNLOCK,
+	BOARD_EVENT_DEMOD_LOCK,
+	BOARD_EVENT_DEMOD_UNLOCK,
+	BOARD_EVENT_RECEPTION_MAX_4,
+	BOARD_EVENT_RECEPTION_3,
+	BOARD_EVENT_RECEPTION_2,
+	BOARD_EVENT_RECEPTION_1,
+	BOARD_EVENT_RECEPTION_LOST_0,
+	BOARD_EVENT_MULTIPLEX_OK,
+	BOARD_EVENT_MULTIPLEX_ERRORS
+};
+
+int sms_board_event(struct smscore_device_t *coredev,
+		enum SMS_BOARD_EVENTS gevent);
+
 int sms_board_setup(struct smscore_device_t *coredev);
 
 #define SMS_LED_OFF 0
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 7bd4d1dee2b..32be382f0e9 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -30,9 +30,13 @@
 #include <linux/io.h>
 
 #include <linux/firmware.h>
+#include <linux/wait.h>
+#include <asm/byteorder.h>
 
 #include "smscoreapi.h"
 #include "sms-cards.h"
+#include "smsir.h"
+#include "smsendian.h"
 
 static int sms_dbg;
 module_param_named(debug, sms_dbg, int, 0644);
@@ -58,42 +62,6 @@ struct smscore_client_t {
 	onremove_t		onremove_handler;
 };
 
-struct smscore_device_t {
-	struct list_head entry;
-
-	struct list_head clients;
-	struct list_head subclients;
-	spinlock_t		clientslock;
-
-	struct list_head buffers;
-	spinlock_t		bufferslock;
-	int				num_buffers;
-
-	void			*common_buffer;
-	int				common_buffer_size;
-	dma_addr_t		common_buffer_phys;
-
-	void			*context;
-	struct device	*device;
-
-	char			devpath[32];
-	unsigned long	device_flags;
-
-	setmode_t		setmode_handler;
-	detectmode_t	detectmode_handler;
-	sendrequest_t	sendrequest_handler;
-	preload_t		preload_handler;
-	postload_t		postload_handler;
-
-	int				mode, modes_supported;
-
-	struct completion version_ex_done, data_download_done, trigger_done;
-	struct completion init_device_done, reload_start_done, resume_done;
-
-	int board_id;
-	int led_state;
-};
-
 void smscore_set_board_id(struct smscore_device_t *core, int id)
 {
 	core->board_id = id;
@@ -384,6 +352,13 @@ int smscore_register_device(struct smsdevice_params_t *params,
 	init_completion(&dev->init_device_done);
 	init_completion(&dev->reload_start_done);
 	init_completion(&dev->resume_done);
+	init_completion(&dev->gpio_configuration_done);
+	init_completion(&dev->gpio_set_level_done);
+	init_completion(&dev->gpio_get_level_done);
+	init_completion(&dev->ir_init_done);
+
+	/* Buffer management */
+	init_waitqueue_head(&dev->buffer_mng_waitq);
 
 	/* alloc common buffer */
 	dev->common_buffer_size = params->buffer_size * params->num_buffers;
@@ -439,6 +414,71 @@ int smscore_register_device(struct smsdevice_params_t *params,
 }
 EXPORT_SYMBOL_GPL(smscore_register_device);
 
+
+static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev,
+		void *buffer, size_t size, struct completion *completion) {
+	int rc = coredev->sendrequest_handler(coredev->context, buffer, size);
+	if (rc < 0) {
+		sms_info("sendrequest returned error %d", rc);
+		return rc;
+	}
+
+	return wait_for_completion_timeout(completion,
+			msecs_to_jiffies(SMS_PROTOCOL_MAX_RAOUNDTRIP_MS)) ?
+			0 : -ETIME;
+}
+
+/**
+ * Starts & enables IR operations
+ *
+ * @return 0 on success, < 0 on error.
+ */
+static int smscore_init_ir(struct smscore_device_t *coredev)
+{
+	int ir_io;
+	int rc;
+	void *buffer;
+
+	coredev->ir.input_dev = NULL;
+	ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir;
+	if (ir_io) {/* only if IR port exist we use IR sub-module */
+		sms_info("IR loading");
+		rc = sms_ir_init(coredev);
+
+		if	(rc != 0)
+			sms_err("Error initialization DTV IR sub-module");
+		else {
+			buffer = kmalloc(sizeof(struct SmsMsgData_ST2) +
+						SMS_DMA_ALIGNMENT,
+						GFP_KERNEL | GFP_DMA);
+			if (buffer) {
+				struct SmsMsgData_ST2 *msg =
+				(struct SmsMsgData_ST2 *)
+				SMS_ALIGN_ADDRESS(buffer);
+
+				SMS_INIT_MSG(&msg->xMsgHeader,
+						MSG_SMS_START_IR_REQ,
+						sizeof(struct SmsMsgData_ST2));
+				msg->msgData[0] = coredev->ir.controller;
+				msg->msgData[1] = coredev->ir.timeout;
+
+				smsendian_handle_tx_message(
+					(struct SmsMsgHdr_ST2 *)msg);
+				rc = smscore_sendrequest_and_wait(coredev, msg,
+						msg->xMsgHeader. msgLength,
+						&coredev->ir_init_done);
+
+				kfree(buffer);
+			} else
+				sms_err
+				("Sending IR initialization message failed");
+		}
+	} else
+		sms_info("IR port has not been detected");
+
+	return 0;
+}
+
 /**
  * sets initial device mode and notifies client hotplugs that device is ready
  *
@@ -459,6 +499,7 @@ int smscore_start_device(struct smscore_device_t *coredev)
 	kmutex_lock(&g_smscore_deviceslock);
 
 	rc = smscore_notify_callbacks(coredev, coredev->device, 1);
+	smscore_init_ir(coredev);
 
 	sms_info("device %p started, rc %d", coredev, rc);
 
@@ -468,29 +509,19 @@ int smscore_start_device(struct smscore_device_t *coredev)
 }
 EXPORT_SYMBOL_GPL(smscore_start_device);
 
-static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev,
-					void *buffer, size_t size,
-					struct completion *completion)
-{
-	int rc = coredev->sendrequest_handler(coredev->context, buffer, size);
-	if (rc < 0) {
-		sms_info("sendrequest returned error %d", rc);
-		return rc;
-	}
-
-	return wait_for_completion_timeout(completion,
-					   msecs_to_jiffies(10000)) ?
-						0 : -ETIME;
-}
 
 static int smscore_load_firmware_family2(struct smscore_device_t *coredev,
 					 void *buffer, size_t size)
 {
 	struct SmsFirmware_ST *firmware = (struct SmsFirmware_ST *) buffer;
 	struct SmsMsgHdr_ST *msg;
-	u32 mem_address = firmware->StartAddress;
+	u32 mem_address;
 	u8 *payload = firmware->Payload;
 	int rc = 0;
+	firmware->StartAddress = le32_to_cpu(firmware->StartAddress);
+	firmware->Length = le32_to_cpu(firmware->Length);
+
+	mem_address = firmware->StartAddress;
 
 	sms_info("loading FW to addr 0x%x size %d",
 		 mem_address, firmware->Length);
@@ -657,6 +688,9 @@ void smscore_unregister_device(struct smscore_device_t *coredev)
 
 	kmutex_lock(&g_smscore_deviceslock);
 
+	/* Release input device (IR) resources */
+	sms_ir_exit(coredev);
+
 	smscore_notify_clients(coredev);
 	smscore_notify_callbacks(coredev, NULL, 0);
 
@@ -664,7 +698,9 @@ void smscore_unregister_device(struct smscore_device_t *coredev)
 	 * onresponse must no longer be called */
 
 	while (1) {
-		while ((cb = smscore_getbuffer(coredev))) {
+		while (!list_empty(&coredev->buffers)) {
+			cb = (struct smscore_buffer_t *) coredev->buffers.next;
+			list_del(&cb->entry);
 			kfree(cb);
 			num_buffers++;
 		}
@@ -685,8 +721,10 @@ void smscore_unregister_device(struct smscore_device_t *coredev)
 
 	if (coredev->common_buffer)
 		dma_free_coherent(NULL, coredev->common_buffer_size,
-				  coredev->common_buffer,
-				  coredev->common_buffer_phys);
+			coredev->common_buffer, coredev->common_buffer_phys);
+
+	if (coredev->fw_buf != NULL)
+		kfree(coredev->fw_buf);
 
 	list_del(&coredev->entry);
 	kfree(coredev);
@@ -746,7 +784,7 @@ static char *smscore_fw_lkup[][SMS_NUM_OF_DEVICE_TYPES] = {
 	/*BDA*/
 	{"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"},
 	/*ISDBT*/
-	{"none", "isdbt_nova_12mhz.inp", "dvb_nova_12mhz.inp", "none"},
+	{"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"},
 	/*ISDBTBDA*/
 	{"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"},
 	/*CMMB*/
@@ -870,7 +908,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
 		coredev->device_flags &= ~SMS_DEVICE_NOT_READY;
 	}
 
-	if (rc != 0)
+	if (rc < 0)
 		sms_err("return error code %d.", rc);
 	return rc;
 }
@@ -940,14 +978,11 @@ smscore_client_t *smscore_find_client(struct smscore_device_t *coredev,
  *
  */
 void smscore_onresponse(struct smscore_device_t *coredev,
-			struct smscore_buffer_t *cb)
-{
-	struct SmsMsgHdr_ST *phdr =
-		(struct SmsMsgHdr_ST *)((u8 *) cb->p + cb->offset);
-	struct smscore_client_t *client =
-		smscore_find_client(coredev, phdr->msgType, phdr->msgDstId);
+		struct smscore_buffer_t *cb) {
+	struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) ((u8 *) cb->p
+			+ cb->offset);
+	struct smscore_client_t *client;
 	int rc = -EBUSY;
-
 	static unsigned long last_sample_time; /* = 0; */
 	static int data_total; /* = 0; */
 	unsigned long time_now = jiffies_to_msecs(jiffies);
@@ -965,6 +1000,16 @@ void smscore_onresponse(struct smscore_device_t *coredev,
 	}
 
 	data_total += cb->size;
+	/* Do we need to re-route? */
+	if ((phdr->msgType == MSG_SMS_HO_PER_SLICES_IND) ||
+			(phdr->msgType == MSG_SMS_TRANSMISSION_IND)) {
+		if (coredev->mode == DEVICE_MODE_DVBT_BDA)
+			phdr->msgDstId = DVBT_BDA_CONTROL_MSG_ID;
+	}
+
+
+	client = smscore_find_client(coredev, phdr->msgType, phdr->msgDstId);
+
 	/* If no client registered for type & id,
 	 * check for control client where type is not registered */
 	if (client)
@@ -1009,6 +1054,35 @@ void smscore_onresponse(struct smscore_device_t *coredev,
 		case MSG_SMS_SLEEP_RESUME_COMP_IND:
 			complete(&coredev->resume_done);
 			break;
+		case MSG_SMS_GPIO_CONFIG_EX_RES:
+			sms_debug("MSG_SMS_GPIO_CONFIG_EX_RES");
+			complete(&coredev->gpio_configuration_done);
+			break;
+		case MSG_SMS_GPIO_SET_LEVEL_RES:
+			sms_debug("MSG_SMS_GPIO_SET_LEVEL_RES");
+			complete(&coredev->gpio_set_level_done);
+			break;
+		case MSG_SMS_GPIO_GET_LEVEL_RES:
+		{
+			u32 *msgdata = (u32 *) phdr;
+			coredev->gpio_get_res = msgdata[1];
+			sms_debug("MSG_SMS_GPIO_GET_LEVEL_RES gpio level %d",
+					coredev->gpio_get_res);
+			complete(&coredev->gpio_get_level_done);
+			break;
+		}
+		case MSG_SMS_START_IR_RES:
+			complete(&coredev->ir_init_done);
+			break;
+		case MSG_SMS_IR_SAMPLES_IND:
+			sms_ir_event(coredev,
+				(const char *)
+				((char *)phdr
+				+ sizeof(struct SmsMsgHdr_ST)),
+				(int)phdr->msgLength
+				- sizeof(struct SmsMsgHdr_ST));
+			break;
+
 		default:
 			break;
 		}
@@ -1030,12 +1104,24 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
 	struct smscore_buffer_t *cb = NULL;
 	unsigned long flags;
 
+	DEFINE_WAIT(wait);
+
 	spin_lock_irqsave(&coredev->bufferslock, flags);
 
-	if (!list_empty(&coredev->buffers)) {
-		cb = (struct smscore_buffer_t *) coredev->buffers.next;
-		list_del(&cb->entry);
-	}
+	/* This function must return a valid buffer, since the buffer list is
+	 * finite, we check that there is an available buffer, if not, we wait
+	 * until such buffer become available.
+	 */
+
+	prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
+
+	if (list_empty(&coredev->buffers))
+		schedule();
+
+	finish_wait(&coredev->buffer_mng_waitq, &wait);
+
+	cb = (struct smscore_buffer_t *) coredev->buffers.next;
+	list_del(&cb->entry);
 
 	spin_unlock_irqrestore(&coredev->bufferslock, flags);
 
@@ -1052,8 +1138,8 @@ EXPORT_SYMBOL_GPL(smscore_getbuffer);
  *
  */
 void smscore_putbuffer(struct smscore_device_t *coredev,
-		       struct smscore_buffer_t *cb)
-{
+		struct smscore_buffer_t *cb) {
+	wake_up_interruptible(&coredev->buffer_mng_waitq);
 	list_add_locked(&cb->entry, &coredev->buffers, &coredev->bufferslock);
 }
 EXPORT_SYMBOL_GPL(smscore_putbuffer);
@@ -1210,8 +1296,9 @@ int smsclient_sendrequest(struct smscore_client_t *client,
 EXPORT_SYMBOL_GPL(smsclient_sendrequest);
 
 
+/* old GPIO managments implementation */
 int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
-			   struct smscore_gpio_config *pinconfig)
+			   struct smscore_config_gpio *pinconfig)
 {
 	struct {
 		struct SmsMsgHdr_ST hdr;
@@ -1280,35 +1367,254 @@ int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level)
 					    &msg, sizeof(msg));
 }
 
-static int __init smscore_module_init(void)
-{
-	int rc = 0;
+/* new GPIO managment implementation */
+static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum,
+		u32 *pGroupNum, u32 *pGroupCfg) {
+
+	*pGroupCfg = 1;
+
+	if (PinNum >= 0 && PinNum <= 1)	{
+		*pTranslatedPinNum = 0;
+		*pGroupNum = 9;
+		*pGroupCfg = 2;
+	} else if (PinNum >= 2 && PinNum <= 6) {
+		*pTranslatedPinNum = 2;
+		*pGroupNum = 0;
+		*pGroupCfg = 2;
+	} else if (PinNum >= 7 && PinNum <= 11) {
+		*pTranslatedPinNum = 7;
+		*pGroupNum = 1;
+	} else if (PinNum >= 12 && PinNum <= 15) {
+		*pTranslatedPinNum = 12;
+		*pGroupNum = 2;
+		*pGroupCfg = 3;
+	} else if (PinNum == 16) {
+		*pTranslatedPinNum = 16;
+		*pGroupNum = 23;
+	} else if (PinNum >= 17 && PinNum <= 24) {
+		*pTranslatedPinNum = 17;
+		*pGroupNum = 3;
+	} else if (PinNum == 25) {
+		*pTranslatedPinNum = 25;
+		*pGroupNum = 6;
+	} else if (PinNum >= 26 && PinNum <= 28) {
+		*pTranslatedPinNum = 26;
+		*pGroupNum = 4;
+	} else if (PinNum == 29) {
+		*pTranslatedPinNum = 29;
+		*pGroupNum = 5;
+		*pGroupCfg = 2;
+	} else if (PinNum == 30) {
+		*pTranslatedPinNum = 30;
+		*pGroupNum = 8;
+	} else if (PinNum == 31) {
+		*pTranslatedPinNum = 31;
+		*pGroupNum = 17;
+	} else
+		return -1;
 
-	INIT_LIST_HEAD(&g_smscore_notifyees);
-	INIT_LIST_HEAD(&g_smscore_devices);
-	kmutex_init(&g_smscore_deviceslock);
+	*pGroupCfg <<= 24;
 
-	INIT_LIST_HEAD(&g_smscore_registry);
-	kmutex_init(&g_smscore_registrylock);
+	return 0;
+}
+
+int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
+		struct smscore_gpio_config *pGpioConfig) {
+
+	u32 totalLen;
+	u32 TranslatedPinNum;
+	u32 GroupNum;
+	u32 ElectricChar;
+	u32 groupCfg;
+	void *buffer;
+	int rc;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[6];
+	} *pMsg;
+
+
+	if (PinNum > MAX_GPIO_PIN_NUMBER)
+		return -EINVAL;
+
+	if (pGpioConfig == NULL)
+		return -EINVAL;
+
+	totalLen = sizeof(struct SmsMsgHdr_ST) + (sizeof(u32) * 6);
+
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
+
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
+
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+
+	if (!(coredev->device_flags & SMS_DEVICE_FAMILY2)) {
+		pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_REQ;
+		if (GetGpioPinParams(PinNum, &TranslatedPinNum, &GroupNum,
+				&groupCfg) != 0)
+			return -EINVAL;
+
+		pMsg->msgData[1] = TranslatedPinNum;
+		pMsg->msgData[2] = GroupNum;
+		ElectricChar = (pGpioConfig->PullUpDown)
+				| (pGpioConfig->InputCharacteristics << 2)
+				| (pGpioConfig->OutputSlewRate << 3)
+				| (pGpioConfig->OutputDriving << 4);
+		pMsg->msgData[3] = ElectricChar;
+		pMsg->msgData[4] = pGpioConfig->Direction;
+		pMsg->msgData[5] = groupCfg;
+	} else {
+		pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_EX_REQ;
+		pMsg->msgData[1] = pGpioConfig->PullUpDown;
+		pMsg->msgData[2] = pGpioConfig->OutputSlewRate;
+		pMsg->msgData[3] = pGpioConfig->OutputDriving;
+		pMsg->msgData[4] = pGpioConfig->Direction;
+		pMsg->msgData[5] = 0;
+	}
+
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_configuration_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_configure timeout");
+		else
+			sms_err("smscore_gpio_configure error");
+	}
+	kfree(buffer);
+
+	return rc;
+}
+
+int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 NewLevel) {
+
+	u32 totalLen;
+	int rc;
+	void *buffer;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[3]; /* keep it 3 ! */
+	} *pMsg;
+
+	if ((NewLevel > 1) || (PinNum > MAX_GPIO_PIN_NUMBER) ||
+			(PinNum > MAX_GPIO_PIN_NUMBER))
+		return -EINVAL;
 
+	totalLen = sizeof(struct SmsMsgHdr_ST) +
+			(3 * sizeof(u32)); /* keep it 3 ! */
 
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
 
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
 
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_SET_LEVEL_REQ;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+	pMsg->msgData[1] = NewLevel;
 
+	/* Send message to SMS */
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_set_level_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_set_level timeout");
+		else
+			sms_err("smscore_gpio_set_level error");
+	}
+	kfree(buffer);
 
 	return rc;
-	sms_debug("rc %d", rc);
+}
+
+int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 *level) {
+
+	u32 totalLen;
+	int rc;
+	void *buffer;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[2];
+	} *pMsg;
+
+
+	if (PinNum > MAX_GPIO_PIN_NUMBER)
+		return -EINVAL;
+
+	totalLen = sizeof(struct SmsMsgHdr_ST) + (2 * sizeof(u32));
+
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
+
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
+
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_GET_LEVEL_REQ;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+	pMsg->msgData[1] = 0;
+
+	/* Send message to SMS */
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_get_level_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_get_level timeout");
+		else
+			sms_err("smscore_gpio_get_level error");
+	}
+	kfree(buffer);
+
+	/* Its a race between other gpio_get_level() and the copy of the single
+	 * global 'coredev->gpio_get_res' to  the function's variable 'level'
+	 */
+	*level = coredev->gpio_get_res;
 
 	return rc;
 }
 
-static void __exit smscore_module_exit(void)
+static int __init smscore_module_init(void)
 {
+	int rc = 0;
 
+	INIT_LIST_HEAD(&g_smscore_notifyees);
+	INIT_LIST_HEAD(&g_smscore_devices);
+	kmutex_init(&g_smscore_deviceslock);
 
+	INIT_LIST_HEAD(&g_smscore_registry);
+	kmutex_init(&g_smscore_registrylock);
 
+	return rc;
+}
 
-
+static void __exit smscore_module_exit(void)
+{
 	kmutex_lock(&g_smscore_deviceslock);
 	while (!list_empty(&g_smscore_notifyees)) {
 		struct smscore_device_notifyee_t *notifyee =
diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h
index 548de9056e8..f1108c64e89 100644
--- a/drivers/media/dvb/siano/smscoreapi.h
+++ b/drivers/media/dvb/siano/smscoreapi.h
@@ -1,26 +1,26 @@
-/*
- *  Driver for the Siano SMS1xxx USB dongle
- *
- *  author: Anatoly Greenblat
- *
- *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation;
- *
- *  Software distributed under the License is distributed on an "AS IS"
- *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
- *
- *  See the GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __smscoreapi_h__
-#define __smscoreapi_h__
+/****************************************************************
+
+Siano Mobile Silicon, Inc.
+MDTV receiver kernel modules.
+Copyright (C) 2006-2008, Uri Shkolnik, Anatoly Greenblat
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+****************************************************************/
+
+#ifndef __SMS_CORE_API_H__
+#define __SMS_CORE_API_H__
 
 #include <linux/version.h>
 #include <linux/device.h>
@@ -28,14 +28,13 @@
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
 #include <linux/types.h>
-#include <asm/page.h>
 #include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/timer.h>
 
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
+#include <asm/page.h>
 
+#include "smsir.h"
 
 #define kmutex_init(_p_) mutex_init(_p_)
 #define kmutex_lock(_p_) mutex_lock(_p_)
@@ -46,13 +45,14 @@
 #define min(a, b) (((a) < (b)) ? (a) : (b))
 #endif
 
-#define SMS_ALLOC_ALIGNMENT					128
-#define SMS_DMA_ALIGNMENT					16
+#define SMS_PROTOCOL_MAX_RAOUNDTRIP_MS			(10000)
+#define SMS_ALLOC_ALIGNMENT				128
+#define SMS_DMA_ALIGNMENT				16
 #define SMS_ALIGN_ADDRESS(addr) \
 	((((uintptr_t)(addr)) + (SMS_DMA_ALIGNMENT-1)) & ~(SMS_DMA_ALIGNMENT-1))
 
-#define SMS_DEVICE_FAMILY2					1
-#define SMS_ROM_NO_RESPONSE					2
+#define SMS_DEVICE_FAMILY2				1
+#define SMS_ROM_NO_RESPONSE				2
 #define SMS_DEVICE_NOT_READY				0x8000000
 
 enum sms_device_type_st {
@@ -83,13 +83,13 @@ typedef void (*onremove_t)(void *context);
 struct smscore_buffer_t {
 	/* public members, once passed to clients can be changed freely */
 	struct list_head entry;
-	int				size;
-	int				offset;
+	int size;
+	int offset;
 
 	/* private members, read-only for clients */
-	void			*p;
-	dma_addr_t		phys;
-	unsigned long	offset_in_common;
+	void *p;
+	dma_addr_t phys;
+	unsigned long offset_in_common;
 };
 
 struct smsdevice_params_t {
@@ -116,10 +116,63 @@ struct smsclient_params_t {
 	int				data_type;
 	onresponse_t	onresponse_handler;
 	onremove_t		onremove_handler;
-
 	void			*context;
 };
 
+struct smscore_device_t {
+	struct list_head entry;
+
+	struct list_head clients;
+	struct list_head subclients;
+	spinlock_t clientslock;
+
+	struct list_head buffers;
+	spinlock_t bufferslock;
+	int num_buffers;
+
+	void *common_buffer;
+	int common_buffer_size;
+	dma_addr_t common_buffer_phys;
+
+	void *context;
+	struct device *device;
+
+	char devpath[32];
+	unsigned long device_flags;
+
+	setmode_t setmode_handler;
+	detectmode_t detectmode_handler;
+	sendrequest_t sendrequest_handler;
+	preload_t preload_handler;
+	postload_t postload_handler;
+
+	int mode, modes_supported;
+
+	/* host <--> device messages */
+	struct completion version_ex_done, data_download_done, trigger_done;
+	struct completion init_device_done, reload_start_done, resume_done;
+	struct completion gpio_configuration_done, gpio_set_level_done;
+	struct completion gpio_get_level_done, ir_init_done;
+
+	/* Buffer management */
+	wait_queue_head_t buffer_mng_waitq;
+
+	/* GPIO */
+	int gpio_get_res;
+
+	/* Target hardware board */
+	int board_id;
+
+	/* Firmware */
+	u8 *fw_buf;
+	u32 fw_buf_size;
+
+	/* Infrared (IR) */
+	struct ir_t ir;
+
+	int led_state;
+};
+
 /* GPIO definitions for antenna frequency domain control (SMS8021) */
 #define SMS_ANTENNA_GPIO_0					1
 #define SMS_ANTENNA_GPIO_1					0
@@ -154,18 +207,15 @@ struct smsclient_params_t {
 #define MSG_SMS_INIT_DEVICE_RES				579
 #define MSG_SMS_ADD_PID_FILTER_REQ			601
 #define MSG_SMS_ADD_PID_FILTER_RES			602
-#define MSG_SMS_REMOVE_PID_FILTER_REQ		603
-#define MSG_SMS_REMOVE_PID_FILTER_RES		604
-#define MSG_SMS_DAB_CHANNEL					607
-#define MSG_SMS_GET_PID_FILTER_LIST_REQ		608
-#define MSG_SMS_GET_PID_FILTER_LIST_RES		609
-#define MSG_SMS_GET_STATISTICS_REQ			615
-#define MSG_SMS_GET_STATISTICS_RES			616
-#define MSG_SMS_SET_ANTENNA_CONFIG_REQ		651
-#define MSG_SMS_SET_ANTENNA_CONFIG_RES		652
-#define MSG_SMS_GET_STATISTICS_EX_REQ		653
-#define MSG_SMS_GET_STATISTICS_EX_RES		654
-#define MSG_SMS_SLEEP_RESUME_COMP_IND		655
+#define MSG_SMS_REMOVE_PID_FILTER_REQ			603
+#define MSG_SMS_REMOVE_PID_FILTER_RES			604
+#define MSG_SMS_DAB_CHANNEL				607
+#define MSG_SMS_GET_PID_FILTER_LIST_REQ			608
+#define MSG_SMS_GET_PID_FILTER_LIST_RES			609
+#define MSG_SMS_HO_PER_SLICES_IND			630
+#define MSG_SMS_SET_ANTENNA_CONFIG_REQ			651
+#define MSG_SMS_SET_ANTENNA_CONFIG_RES			652
+#define MSG_SMS_SLEEP_RESUME_COMP_IND			655
 #define MSG_SMS_DATA_DOWNLOAD_REQ			660
 #define MSG_SMS_DATA_DOWNLOAD_RES			661
 #define MSG_SMS_SWDOWNLOAD_TRIGGER_REQ		664
@@ -190,14 +240,31 @@ struct smsclient_params_t {
 #define MSG_SMS_GPIO_CONFIG_EX_RES			713
 #define MSG_SMS_ISDBT_TUNE_REQ				776
 #define MSG_SMS_ISDBT_TUNE_RES				777
+#define MSG_SMS_TRANSMISSION_IND			782
+#define MSG_SMS_START_IR_REQ				800
+#define MSG_SMS_START_IR_RES				801
+#define MSG_SMS_IR_SAMPLES_IND				802
+#define MSG_SMS_SIGNAL_DETECTED_IND			827
+#define MSG_SMS_NO_SIGNAL_IND				828
 
 #define SMS_INIT_MSG_EX(ptr, type, src, dst, len) do { \
 	(ptr)->msgType = type; (ptr)->msgSrcId = src; (ptr)->msgDstId = dst; \
 	(ptr)->msgLength = len; (ptr)->msgFlags = 0; \
 } while (0)
+
 #define SMS_INIT_MSG(ptr, type, len) \
 	SMS_INIT_MSG_EX(ptr, type, 0, HIF_TASK, len)
 
+enum SMS_DVB3_EVENTS {
+	DVB3_EVENT_INIT = 0,
+	DVB3_EVENT_SLEEP,
+	DVB3_EVENT_HOTPLUG,
+	DVB3_EVENT_FE_LOCK,
+	DVB3_EVENT_FE_UNLOCK,
+	DVB3_EVENT_UNC_OK,
+	DVB3_EVENT_UNC_ERR
+};
+
 enum SMS_DEVICE_MODE {
 	DEVICE_MODE_NONE = -1,
 	DEVICE_MODE_DVBT = 0,
@@ -221,8 +288,13 @@ struct SmsMsgHdr_ST {
 };
 
 struct SmsMsgData_ST {
-	struct SmsMsgHdr_ST	xMsgHeader;
-	u32			msgData[1];
+	struct SmsMsgHdr_ST xMsgHeader;
+	u32 msgData[1];
+};
+
+struct SmsMsgData_ST2 {
+	struct SmsMsgHdr_ST xMsgHeader;
+	u32 msgData[2];
 };
 
 struct SmsDataDownload_ST {
@@ -238,11 +310,12 @@ struct SmsVersionRes_ST {
 	u8		Step; /* 0 - Step A */
 	u8		MetalFix; /* 0 - Metal 0 */
 
-	u8		FirmwareId; /* 0xFF � ROM, otherwise the
-				     * value indicated by
-				     * SMSHOSTLIB_DEVICE_MODES_E */
-	u8		SupportedProtocols; /* Bitwise OR combination of
+	/* FirmwareId 0xFF if ROM, otherwise the
+	 * value indicated by SMSHOSTLIB_DEVICE_MODES_E */
+	u8 FirmwareId;
+	/* SupportedProtocols Bitwise OR combination of
 					     * supported protocols */
+	u8 SupportedProtocols;
 
 	u8		VersionMajor;
 	u8		VersionMinor;
@@ -264,86 +337,219 @@ struct SmsFirmware_ST {
 	u8			Payload[1];
 };
 
-struct SMSHOSTLIB_STATISTICS_ST {
-	u32 Reserved; /* Reserved */
+/* Statistics information returned as response for
+ * SmsHostApiGetStatistics_Req */
+struct SMSHOSTLIB_STATISTICS_S {
+	u32 Reserved;		/* Reserved */
 
 	/* Common parameters */
-	u32 IsRfLocked; /* 0 - not locked, 1 - locked */
-	u32 IsDemodLocked; /* 0 - not locked, 1 - locked */
-	u32 IsExternalLNAOn; /* 0 - external LNA off, 1 - external LNA on */
+	u32 IsRfLocked;		/* 0 - not locked, 1 - locked */
+	u32 IsDemodLocked;	/* 0 - not locked, 1 - locked */
+	u32 IsExternalLNAOn;	/* 0 - external LNA off, 1 - external LNA on */
 
 	/* Reception quality */
-	s32  SNR; /* dB */
-	u32 BER; /* Post Viterbi BER [1E-5] */
-	u32 FIB_CRC;	/* CRC errors percentage, valid only for DAB */
-	u32 TS_PER; /* Transport stream PER, 0xFFFFFFFF indicate N/A,
-		     * valid only for DVB-T/H */
-	u32 MFER; /* DVB-H frame error rate in percentage,
-		   * 0xFFFFFFFF indicate N/A, valid only for DVB-H */
-	s32  RSSI; /* dBm */
-	s32  InBandPwr; /* In band power in dBM */
-	s32  CarrierOffset; /* Carrier Offset in bin/1024 */
-
-	/* Transmission parameters, valid only for DVB-T/H */
-	u32 Frequency; /* Frequency in Hz */
-	u32 Bandwidth; /* Bandwidth in MHz */
-	u32 TransmissionMode; /* Transmission Mode, for DAB modes 1-4,
-			       * for DVB-T/H FFT mode carriers in Kilos */
-	u32 ModemState; /* from SMS_DvbModemState_ET */
-	u32 GuardInterval; /* Guard Interval, 1 divided by value */
-	u32 CodeRate; /* Code Rate from SMS_DvbModemState_ET */
-	u32 LPCodeRate; /* Low Priority Code Rate from SMS_DvbModemState_ET */
-	u32 Hierarchy; /* Hierarchy from SMS_Hierarchy_ET */
-	u32 Constellation; /* Constellation from SMS_Constellation_ET */
+	s32 SNR;		/* dB */
+	u32 BER;		/* Post Viterbi BER [1E-5] */
+	u32 FIB_CRC;		/* CRC errors percentage, valid only for DAB */
+	u32 TS_PER;		/* Transport stream PER,
+	0xFFFFFFFF indicate N/A, valid only for DVB-T/H */
+	u32 MFER;		/* DVB-H frame error rate in percentage,
+	0xFFFFFFFF indicate N/A, valid only for DVB-H */
+	s32 RSSI;		/* dBm */
+	s32 InBandPwr;		/* In band power in dBM */
+	s32 CarrierOffset;	/* Carrier Offset in bin/1024 */
+
+	/* Transmission parameters */
+	u32 Frequency;		/* Frequency in Hz */
+	u32 Bandwidth;		/* Bandwidth in MHz, valid only for DVB-T/H */
+	u32 TransmissionMode;	/* Transmission Mode, for DAB modes 1-4,
+	for DVB-T/H FFT mode carriers in Kilos */
+	u32 ModemState;		/* from SMSHOSTLIB_DVB_MODEM_STATE_ET,
+	valid only for DVB-T/H */
+	u32 GuardInterval;	/* Guard Interval from
+	SMSHOSTLIB_GUARD_INTERVALS_ET, 	valid only for DVB-T/H */
+	u32 CodeRate;		/* Code Rate from SMSHOSTLIB_CODE_RATE_ET,
+	valid only for DVB-T/H */
+	u32 LPCodeRate;		/* Low Priority Code Rate from
+	SMSHOSTLIB_CODE_RATE_ET, valid only for DVB-T/H */
+	u32 Hierarchy;		/* Hierarchy from SMSHOSTLIB_HIERARCHY_ET,
+	valid only for DVB-T/H */
+	u32 Constellation;	/* Constellation from
+	SMSHOSTLIB_CONSTELLATION_ET, valid only for DVB-T/H */
 
 	/* Burst parameters, valid only for DVB-H */
-	u32 BurstSize; /* Current burst size in bytes */
-	u32 BurstDuration; /* Current burst duration in mSec */
-	u32 BurstCycleTime; /* Current burst cycle time in mSec */
-	u32 CalculatedBurstCycleTime; /* Current burst cycle time in mSec,
-				       * as calculated by demodulator */
-	u32 NumOfRows; /* Number of rows in MPE table */
-	u32 NumOfPaddCols; /* Number of padding columns in MPE table */
-	u32 NumOfPunctCols; /* Number of puncturing columns in MPE table */
-	/* Burst parameters */
-	u32 ErrorTSPackets; /* Number of erroneous transport-stream packets */
-	u32 TotalTSPackets; /* Total number of transport-stream packets */
-	u32 NumOfValidMpeTlbs; /* Number of MPE tables which do not include
-				* errors after MPE RS decoding */
-	u32 NumOfInvalidMpeTlbs; /* Number of MPE tables which include errors
-				  * after MPE RS decoding */
-	u32 NumOfCorrectedMpeTlbs; /* Number of MPE tables which were corrected
-				    * by MPE RS decoding */
-
+	u32 BurstSize;		/* Current burst size in bytes,
+	valid only for DVB-H */
+	u32 BurstDuration;	/* Current burst duration in mSec,
+	valid only for DVB-H */
+	u32 BurstCycleTime;	/* Current burst cycle time in mSec,
+	valid only for DVB-H */
+	u32 CalculatedBurstCycleTime;/* Current burst cycle time in mSec,
+	as calculated by demodulator, valid only for DVB-H */
+	u32 NumOfRows;		/* Number of rows in MPE table,
+	valid only for DVB-H */
+	u32 NumOfPaddCols;	/* Number of padding columns in MPE table,
+	valid only for DVB-H */
+	u32 NumOfPunctCols;	/* Number of puncturing columns in MPE table,
+	valid only for DVB-H */
+	u32 ErrorTSPackets;	/* Number of erroneous
+	transport-stream packets */
+	u32 TotalTSPackets;	/* Total number of transport-stream packets */
+	u32 NumOfValidMpeTlbs;	/* Number of MPE tables which do not include
+	errors after MPE RS decoding */
+	u32 NumOfInvalidMpeTlbs;/* Number of MPE tables which include errors
+	after MPE RS decoding */
+	u32 NumOfCorrectedMpeTlbs;/* Number of MPE tables which were
+	corrected by MPE RS decoding */
 	/* Common params */
-	u32 BERErrorCount; /* Number of errornous SYNC bits. */
-	u32 BERBitCount; /* Total number of SYNC bits. */
+	u32 BERErrorCount;	/* Number of errornous SYNC bits. */
+	u32 BERBitCount;	/* Total number of SYNC bits. */
 
 	/* Interface information */
-	u32 SmsToHostTxErrors; /* Total number of transmission errors. */
+	u32 SmsToHostTxErrors;	/* Total number of transmission errors. */
 
 	/* DAB/T-DMB */
-	u32 PreBER; /* DAB/T-DMB only: Pre Viterbi BER [1E-5] */
+	u32 PreBER; 		/* DAB/T-DMB only: Pre Viterbi BER [1E-5] */
 
 	/* DVB-H TPS parameters */
-	u32 CellId; /* TPS Cell ID in bits 15..0, bits 31..16 zero;
-		     * if set to 0xFFFFFFFF cell_id not yet recovered */
+	u32 CellId;		/* TPS Cell ID in bits 15..0, bits 31..16 zero;
+	 if set to 0xFFFFFFFF cell_id not yet recovered */
+	u32 DvbhSrvIndHP;	/* DVB-H service indication info, bit 1 -
+	Time Slicing indicator, bit 0 - MPE-FEC indicator */
+	u32 DvbhSrvIndLP;	/* DVB-H service indication info, bit 1 -
+	Time Slicing indicator, bit 0 - MPE-FEC indicator */
 
+	u32 NumMPEReceived;	/* DVB-H, Num MPE section received */
+
+	u32 ReservedFields[10];	/* Reserved */
 };
 
-struct SmsMsgStatisticsInfo_ST {
-	u32 RequestResult;
+struct PID_STATISTICS_DATA_S {
+	struct PID_BURST_S {
+		u32 size;
+		u32 padding_cols;
+		u32 punct_cols;
+		u32 duration;
+		u32 cycle;
+		u32 calc_cycle;
+	} burst;
+
+	u32 tot_tbl_cnt;
+	u32 invalid_tbl_cnt;
+	u32 tot_cor_tbl;
+};
 
-	struct SMSHOSTLIB_STATISTICS_ST Stat;
+struct PID_DATA_S {
+	u32 pid;
+	u32 num_rows;
+	struct PID_STATISTICS_DATA_S pid_statistics;
+};
 
-	/* Split the calc of the SNR in DAB */
-	u32 Signal; /* dB */
-	u32 Noise; /* dB */
+#define CORRECT_STAT_RSSI(_stat) ((_stat).RSSI *= -1)
+#define CORRECT_STAT_BANDWIDTH(_stat) (_stat.Bandwidth = 8 - _stat.Bandwidth)
+#define CORRECT_STAT_TRANSMISSON_MODE(_stat) \
+	if (_stat.TransmissionMode == 0) \
+		_stat.TransmissionMode = 2; \
+	else if (_stat.TransmissionMode == 1) \
+		_stat.TransmissionMode = 8; \
+		else \
+			_stat.TransmissionMode = 4;
+
+struct TRANSMISSION_STATISTICS_S {
+	u32 Frequency;		/* Frequency in Hz */
+	u32 Bandwidth;		/* Bandwidth in MHz */
+	u32 TransmissionMode;	/* FFT mode carriers in Kilos */
+	u32 GuardInterval;	/* Guard Interval from
+	SMSHOSTLIB_GUARD_INTERVALS_ET */
+	u32 CodeRate;		/* Code Rate from SMSHOSTLIB_CODE_RATE_ET */
+	u32 LPCodeRate;		/* Low Priority Code Rate from
+	SMSHOSTLIB_CODE_RATE_ET */
+	u32 Hierarchy;		/* Hierarchy from SMSHOSTLIB_HIERARCHY_ET */
+	u32 Constellation;	/* Constellation from
+	SMSHOSTLIB_CONSTELLATION_ET */
 
+	/* DVB-H TPS parameters */
+	u32 CellId;		/* TPS Cell ID in bits 15..0, bits 31..16 zero;
+	 if set to 0xFFFFFFFF cell_id not yet recovered */
+	u32 DvbhSrvIndHP;	/* DVB-H service indication info, bit 1 -
+	 Time Slicing indicator, bit 0 - MPE-FEC indicator */
+	u32 DvbhSrvIndLP;	/* DVB-H service indication info, bit 1 -
+	 Time Slicing indicator, bit 0 - MPE-FEC indicator */
+	u32 IsDemodLocked;	/* 0 - not locked, 1 - locked */
 };
 
+struct RECEPTION_STATISTICS_S {
+	u32 IsRfLocked;		/* 0 - not locked, 1 - locked */
+	u32 IsDemodLocked;	/* 0 - not locked, 1 - locked */
+	u32 IsExternalLNAOn;	/* 0 - external LNA off, 1 - external LNA on */
+
+	u32 ModemState;		/* from SMSHOSTLIB_DVB_MODEM_STATE_ET */
+	s32 SNR;		/* dB */
+	u32 BER;		/* Post Viterbi BER [1E-5] */
+	u32 BERErrorCount;	/* Number of erronous SYNC bits. */
+	u32 BERBitCount;	/* Total number of SYNC bits. */
+	u32 TS_PER;		/* Transport stream PER,
+	0xFFFFFFFF indicate N/A */
+	u32 MFER;		/* DVB-H frame error rate in percentage,
+	0xFFFFFFFF indicate N/A, valid only for DVB-H */
+	s32 RSSI;		/* dBm */
+	s32 InBandPwr;		/* In band power in dBM */
+	s32 CarrierOffset;	/* Carrier Offset in bin/1024 */
+	u32 ErrorTSPackets;	/* Number of erroneous
+	transport-stream packets */
+	u32 TotalTSPackets;	/* Total number of transport-stream packets */
+
+	s32 MRC_SNR;		/* dB */
+	s32 MRC_RSSI;		/* dBm */
+	s32 MRC_InBandPwr;	/* In band power in dBM */
+};
 
-struct smscore_gpio_config {
+
+/* Statistics information returned as response for
+ * SmsHostApiGetStatisticsEx_Req for DVB applications, SMS1100 and up */
+struct SMSHOSTLIB_STATISTICS_DVB_S {
+	/* Reception */
+	struct RECEPTION_STATISTICS_S ReceptionData;
+
+	/* Transmission parameters */
+	struct TRANSMISSION_STATISTICS_S TransmissionData;
+
+	/* Burst parameters, valid only for DVB-H */
+#define	SRVM_MAX_PID_FILTERS 8
+	struct PID_DATA_S PidData[SRVM_MAX_PID_FILTERS];
+};
+
+struct SRVM_SIGNAL_STATUS_S {
+	u32 result;
+	u32 snr;
+	u32 tsPackets;
+	u32 etsPackets;
+	u32 constellation;
+	u32 hpCode;
+	u32 tpsSrvIndLP;
+	u32 tpsSrvIndHP;
+	u32 cellId;
+	u32 reason;
+
+	s32 inBandPower;
+	u32 requestId;
+};
+
+struct SMSHOSTLIB_I2C_REQ_ST {
+	u32	DeviceAddress; /* I2c device address */
+	u32	WriteCount; /* number of bytes to write */
+	u32	ReadCount; /* number of bytes to read */
+	u8	Data[1];
+};
+
+struct SMSHOSTLIB_I2C_RES_ST {
+	u32	Status; /* non-zero value in case of failure */
+	u32	ReadCount; /* number of bytes read */
+	u8	Data[1];
+};
+
+
+struct smscore_config_gpio {
 #define SMS_GPIO_DIRECTION_INPUT  0
 #define SMS_GPIO_DIRECTION_OUTPUT 1
 	u8 direction;
@@ -369,6 +575,47 @@ struct smscore_gpio_config {
 	u8 outputdriving;
 };
 
+struct smscore_gpio_config {
+#define SMS_GPIO_DIRECTION_INPUT  0
+#define SMS_GPIO_DIRECTION_OUTPUT 1
+	u8 Direction;
+
+#define SMS_GPIO_PULL_UP_DOWN_NONE     0
+#define SMS_GPIO_PULL_UP_DOWN_PULLDOWN 1
+#define SMS_GPIO_PULL_UP_DOWN_PULLUP   2
+#define SMS_GPIO_PULL_UP_DOWN_KEEPER   3
+	u8 PullUpDown;
+
+#define SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL  0
+#define SMS_GPIO_INPUT_CHARACTERISTICS_SCHMITT 1
+	u8 InputCharacteristics;
+
+#define SMS_GPIO_OUTPUT_SLEW_RATE_SLOW		1 /* 10xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_FAST		0 /* 10xx */
+
+
+#define SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS	0 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_0_9_V_NS	1 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_1_7_V_NS	2 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_3_3_V_NS	3 /* 11xx */
+	u8 OutputSlewRate;
+
+#define SMS_GPIO_OUTPUT_DRIVING_S_4mA		0 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_8mA		1 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_12mA		2 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_16mA		3 /* 10xx */
+
+#define SMS_GPIO_OUTPUT_DRIVING_1_5mA		0 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_2_8mA		1 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_4mA		2 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_7mA		3 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_10mA		4 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_11mA		5 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_14mA		6 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_16mA		7 /* 11xx */
+	u8 OutputDriving;
+};
+
 extern void smscore_registry_setmode(char *devpath, int mode);
 extern int smscore_registry_getmode(char *devpath);
 
@@ -410,10 +657,19 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev);
 extern void smscore_putbuffer(struct smscore_device_t *coredev,
 			      struct smscore_buffer_t *cb);
 
+/* old GPIO managment */
 int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
-			   struct smscore_gpio_config *pinconfig);
+			   struct smscore_config_gpio *pinconfig);
 int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level);
 
+/* new GPIO managment */
+extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
+		struct smscore_gpio_config *pGpioConfig);
+extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 NewLevel);
+extern int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 *level);
+
 void smscore_set_board_id(struct smscore_device_t *core, int id);
 int smscore_get_board_id(struct smscore_device_t *core);
 
@@ -442,4 +698,4 @@ int smscore_led_state(struct smscore_device_t *core, int led);
 	dprintk(KERN_DEBUG, DBG_ADV, fmt, ##arg)
 
 
-#endif /* __smscoreapi_h__ */
+#endif /* __SMS_CORE_API_H__ */
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index ba080b95bef..3ee1c3902c5 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -1,28 +1,34 @@
-/*
- *  Driver for the Siano SMS1xxx USB dongle
- *
- *  Author: Uri Shkolni
- *
- *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation;
- *
- *  Software distributed under the License is distributed on an "AS IS"
- *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
- *
- *  See the GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+/****************************************************************
+
+Siano Mobile Silicon, Inc.
+MDTV receiver kernel modules.
+Copyright (C) 2006-2008, Uri Shkolnik
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+****************************************************************/
 
 #include <linux/module.h>
 #include <linux/init.h>
 
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+
 #include "smscoreapi.h"
+#include "smsendian.h"
 #include "sms-cards.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -39,12 +45,15 @@ struct smsdvb_client_t {
 	struct dvb_frontend     frontend;
 
 	fe_status_t             fe_status;
-	int                     fe_ber, fe_snr, fe_unc, fe_signal_strength;
 
-	struct completion       tune_done, stat_done;
+	struct completion       tune_done;
 
 	/* todo: save freq/band instead whole struct */
 	struct dvb_frontend_parameters fe_params;
+
+	struct SMSHOSTLIB_STATISTICS_DVB_S sms_stat_dvb;
+	int event_fe_state;
+	int event_unc_state;
 };
 
 static struct list_head g_smsdvb_clients;
@@ -54,11 +63,69 @@ static int sms_dbg;
 module_param_named(debug, sms_dbg, int, 0644);
 MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))");
 
+/* Events that may come from DVB v3 adapter */
+static void sms_board_dvb3_event(struct smsdvb_client_t *client,
+		enum SMS_DVB3_EVENTS event) {
+
+	struct smscore_device_t *coredev = client->coredev;
+	switch (event) {
+	case DVB3_EVENT_INIT:
+		sms_debug("DVB3_EVENT_INIT");
+		sms_board_event(coredev, BOARD_EVENT_BIND);
+		break;
+	case DVB3_EVENT_SLEEP:
+		sms_debug("DVB3_EVENT_SLEEP");
+		sms_board_event(coredev, BOARD_EVENT_POWER_SUSPEND);
+		break;
+	case DVB3_EVENT_HOTPLUG:
+		sms_debug("DVB3_EVENT_HOTPLUG");
+		sms_board_event(coredev, BOARD_EVENT_POWER_INIT);
+		break;
+	case DVB3_EVENT_FE_LOCK:
+		if (client->event_fe_state != DVB3_EVENT_FE_LOCK) {
+			client->event_fe_state = DVB3_EVENT_FE_LOCK;
+			sms_debug("DVB3_EVENT_FE_LOCK");
+			sms_board_event(coredev, BOARD_EVENT_FE_LOCK);
+		}
+		break;
+	case DVB3_EVENT_FE_UNLOCK:
+		if (client->event_fe_state != DVB3_EVENT_FE_UNLOCK) {
+			client->event_fe_state = DVB3_EVENT_FE_UNLOCK;
+			sms_debug("DVB3_EVENT_FE_UNLOCK");
+			sms_board_event(coredev, BOARD_EVENT_FE_UNLOCK);
+		}
+		break;
+	case DVB3_EVENT_UNC_OK:
+		if (client->event_unc_state != DVB3_EVENT_UNC_OK) {
+			client->event_unc_state = DVB3_EVENT_UNC_OK;
+			sms_debug("DVB3_EVENT_UNC_OK");
+			sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_OK);
+		}
+		break;
+	case DVB3_EVENT_UNC_ERR:
+		if (client->event_unc_state != DVB3_EVENT_UNC_ERR) {
+			client->event_unc_state = DVB3_EVENT_UNC_ERR;
+			sms_debug("DVB3_EVENT_UNC_ERR");
+			sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_ERRORS);
+		}
+		break;
+
+	default:
+		sms_err("Unknown dvb3 api event");
+		break;
+	}
+}
+
 static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
 {
 	struct smsdvb_client_t *client = (struct smsdvb_client_t *) context;
-	struct SmsMsgHdr_ST *phdr =
-		(struct SmsMsgHdr_ST *)(((u8 *) cb->p) + cb->offset);
+	struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) (((u8 *) cb->p)
+			+ cb->offset);
+	u32 *pMsgData = (u32 *) phdr + 1;
+	/*u32 MsgDataLen = phdr->msgLength - sizeof(struct SmsMsgHdr_ST);*/
+	bool is_status_update = false;
+
+	smsendian_handle_rx_message((struct SmsMsgData_ST *) phdr);
 
 	switch (phdr->msgType) {
 	case MSG_SMS_DVBT_BDA_DATA:
@@ -70,43 +137,110 @@ static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb)
 		complete(&client->tune_done);
 		break;
 
-	case MSG_SMS_GET_STATISTICS_RES:
-	{
-		struct SmsMsgStatisticsInfo_ST *p =
-			(struct SmsMsgStatisticsInfo_ST *)(phdr + 1);
-
-		if (p->Stat.IsDemodLocked) {
-			client->fe_status = FE_HAS_SIGNAL |
-					    FE_HAS_CARRIER |
-					    FE_HAS_VITERBI |
-					    FE_HAS_SYNC |
-					    FE_HAS_LOCK;
-
-			client->fe_snr = p->Stat.SNR;
-			client->fe_ber = p->Stat.BER;
-			client->fe_unc = p->Stat.BERErrorCount;
-
-			if (p->Stat.InBandPwr < -95)
-				client->fe_signal_strength = 0;
-			else if (p->Stat.InBandPwr > -29)
-				client->fe_signal_strength = 100;
-			else
-				client->fe_signal_strength =
-					(p->Stat.InBandPwr + 95) * 3 / 2;
+	case MSG_SMS_SIGNAL_DETECTED_IND:
+		sms_info("MSG_SMS_SIGNAL_DETECTED_IND");
+		client->sms_stat_dvb.TransmissionData.IsDemodLocked = true;
+		is_status_update = true;
+		break;
+
+	case MSG_SMS_NO_SIGNAL_IND:
+		sms_info("MSG_SMS_NO_SIGNAL_IND");
+		client->sms_stat_dvb.TransmissionData.IsDemodLocked = false;
+		is_status_update = true;
+		break;
+
+	case MSG_SMS_TRANSMISSION_IND: {
+		sms_info("MSG_SMS_TRANSMISSION_IND");
+
+		pMsgData++;
+		memcpy(&client->sms_stat_dvb.TransmissionData, pMsgData,
+				sizeof(struct TRANSMISSION_STATISTICS_S));
+
+		/* Mo need to correct guard interval
+		 * (as opposed to old statistics message).
+		 */
+		CORRECT_STAT_BANDWIDTH(client->sms_stat_dvb.TransmissionData);
+		CORRECT_STAT_TRANSMISSON_MODE(
+				client->sms_stat_dvb.TransmissionData);
+		is_status_update = true;
+		break;
+	}
+	case MSG_SMS_HO_PER_SLICES_IND: {
+		struct RECEPTION_STATISTICS_S *pReceptionData =
+				&client->sms_stat_dvb.ReceptionData;
+		struct SRVM_SIGNAL_STATUS_S SignalStatusData;
+
+		/*sms_info("MSG_SMS_HO_PER_SLICES_IND");*/
+		pMsgData++;
+		SignalStatusData.result = pMsgData[0];
+		SignalStatusData.snr = pMsgData[1];
+		SignalStatusData.inBandPower = (s32) pMsgData[2];
+		SignalStatusData.tsPackets = pMsgData[3];
+		SignalStatusData.etsPackets = pMsgData[4];
+		SignalStatusData.constellation = pMsgData[5];
+		SignalStatusData.hpCode = pMsgData[6];
+		SignalStatusData.tpsSrvIndLP = pMsgData[7] & 0x03;
+		SignalStatusData.tpsSrvIndHP = pMsgData[8] & 0x03;
+		SignalStatusData.cellId = pMsgData[9] & 0xFFFF;
+		SignalStatusData.reason = pMsgData[10];
+		SignalStatusData.requestId = pMsgData[11];
+		pReceptionData->IsRfLocked = pMsgData[16];
+		pReceptionData->IsDemodLocked = pMsgData[17];
+		pReceptionData->ModemState = pMsgData[12];
+		pReceptionData->SNR = pMsgData[1];
+		pReceptionData->BER = pMsgData[13];
+		pReceptionData->RSSI = pMsgData[14];
+		CORRECT_STAT_RSSI(client->sms_stat_dvb.ReceptionData);
+
+		pReceptionData->InBandPwr = (s32) pMsgData[2];
+		pReceptionData->CarrierOffset = (s32) pMsgData[15];
+		pReceptionData->TotalTSPackets = pMsgData[3];
+		pReceptionData->ErrorTSPackets = pMsgData[4];
+
+		/* TS PER */
+		if ((SignalStatusData.tsPackets + SignalStatusData.etsPackets)
+				> 0) {
+			pReceptionData->TS_PER = (SignalStatusData.etsPackets
+					* 100) / (SignalStatusData.tsPackets
+					+ SignalStatusData.etsPackets);
 		} else {
-			client->fe_status = 0;
-			client->fe_snr =
-			client->fe_ber =
-			client->fe_unc =
-			client->fe_signal_strength = 0;
+			pReceptionData->TS_PER = 0;
 		}
 
-		complete(&client->stat_done);
-		break;
-	} }
+		pReceptionData->BERBitCount = pMsgData[18];
+		pReceptionData->BERErrorCount = pMsgData[19];
 
+		pReceptionData->MRC_SNR = pMsgData[20];
+		pReceptionData->MRC_InBandPwr = pMsgData[21];
+		pReceptionData->MRC_RSSI = pMsgData[22];
+
+		is_status_update = true;
+		break;
+	}
+	}
 	smscore_putbuffer(client->coredev, cb);
 
+	if (is_status_update) {
+		if (client->sms_stat_dvb.ReceptionData.IsDemodLocked) {
+			client->fe_status = FE_HAS_SIGNAL | FE_HAS_CARRIER
+				| FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+			sms_board_dvb3_event(client, DVB3_EVENT_FE_LOCK);
+			if (client->sms_stat_dvb.ReceptionData.ErrorTSPackets
+					== 0)
+				sms_board_dvb3_event(client, DVB3_EVENT_UNC_OK);
+			else
+				sms_board_dvb3_event(client,
+						DVB3_EVENT_UNC_ERR);
+
+		} else {
+			/*client->fe_status =
+				(phdr->msgType == MSG_SMS_NO_SIGNAL_IND) ?
+				0 : FE_HAS_SIGNAL;*/
+			client->fe_status = 0;
+			sms_board_dvb3_event(client, DVB3_EVENT_FE_UNLOCK);
+		}
+	}
+
 	return 0;
 }
 
@@ -149,6 +283,7 @@ static int smsdvb_start_feed(struct dvb_demux_feed *feed)
 	PidMsg.xMsgHeader.msgLength = sizeof(PidMsg);
 	PidMsg.msgData[0] = feed->pid;
 
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)&PidMsg);
 	return smsclient_sendrequest(client->smsclient,
 				     &PidMsg, sizeof(PidMsg));
 }
@@ -169,6 +304,7 @@ static int smsdvb_stop_feed(struct dvb_demux_feed *feed)
 	PidMsg.xMsgHeader.msgLength = sizeof(PidMsg);
 	PidMsg.msgData[0] = feed->pid;
 
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)&PidMsg);
 	return smsclient_sendrequest(client->smsclient,
 				     &PidMsg, sizeof(PidMsg));
 }
@@ -177,7 +313,10 @@ static int smsdvb_sendrequest_and_wait(struct smsdvb_client_t *client,
 					void *buffer, size_t size,
 					struct completion *completion)
 {
-	int rc = smsclient_sendrequest(client->smsclient, buffer, size);
+	int rc;
+
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)buffer);
+	rc = smsclient_sendrequest(client->smsclient, buffer, size);
 	if (rc < 0)
 		return rc;
 
@@ -186,83 +325,61 @@ static int smsdvb_sendrequest_and_wait(struct smsdvb_client_t *client,
 						0 : -ETIME;
 }
 
-static int smsdvb_send_statistics_request(struct smsdvb_client_t *client)
-{
-	struct SmsMsgHdr_ST Msg = { MSG_SMS_GET_STATISTICS_REQ,
-			     DVBT_BDA_CONTROL_MSG_ID,
-			     HIF_TASK, sizeof(struct SmsMsgHdr_ST), 0 };
-	int ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
-					      &client->stat_done);
-	if (ret < 0)
-		return ret;
-
-	if (client->fe_status & FE_HAS_LOCK)
-		sms_board_led_feedback(client->coredev,
-				       (client->fe_unc == 0) ?
-				       SMS_LED_HI : SMS_LED_LO);
-	else
-		sms_board_led_feedback(client->coredev, SMS_LED_OFF);
-	return ret;
-}
-
 static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
 {
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-	int rc = smsdvb_send_statistics_request(client);
+	struct smsdvb_client_t *client;
+	client = container_of(fe, struct smsdvb_client_t, frontend);
 
-	if (!rc)
-		*stat = client->fe_status;
+	*stat = client->fe_status;
 
-	return rc;
+	return 0;
 }
 
 static int smsdvb_read_ber(struct dvb_frontend *fe, u32 *ber)
 {
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-	int rc = smsdvb_send_statistics_request(client);
+	struct smsdvb_client_t *client;
+	client = container_of(fe, struct smsdvb_client_t, frontend);
 
-	if (!rc)
-		*ber = client->fe_ber;
+	*ber = client->sms_stat_dvb.ReceptionData.BER;
 
-	return rc;
+	return 0;
 }
 
 static int smsdvb_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 {
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-	int rc = smsdvb_send_statistics_request(client);
+	struct smsdvb_client_t *client;
+	client = container_of(fe, struct smsdvb_client_t, frontend);
 
-	if (!rc)
-		*strength = client->fe_signal_strength;
+	if (client->sms_stat_dvb.ReceptionData.InBandPwr < -95)
+		*strength = 0;
+		else if (client->sms_stat_dvb.ReceptionData.InBandPwr > -29)
+			*strength = 100;
+		else
+			*strength =
+				(client->sms_stat_dvb.ReceptionData.InBandPwr
+				+ 95) * 3 / 2;
 
-	return rc;
+	return 0;
 }
 
 static int smsdvb_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-	int rc = smsdvb_send_statistics_request(client);
+	struct smsdvb_client_t *client;
+	client = container_of(fe, struct smsdvb_client_t, frontend);
 
-	if (!rc)
-		*snr = client->fe_snr;
+	*snr = client->sms_stat_dvb.ReceptionData.SNR;
 
-	return rc;
+	return 0;
 }
 
 static int smsdvb_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 {
-	struct smsdvb_client_t *client =
-		container_of(fe, struct smsdvb_client_t, frontend);
-	int rc = smsdvb_send_statistics_request(client);
+	struct smsdvb_client_t *client;
+	client = container_of(fe, struct smsdvb_client_t, frontend);
 
-	if (!rc)
-		*ucblocks = client->fe_unc;
+	*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
 
-	return rc;
+	return 0;
 }
 
 static int smsdvb_get_tune_settings(struct dvb_frontend *fe,
@@ -286,12 +403,15 @@ static int smsdvb_set_frontend(struct dvb_frontend *fe,
 		struct SmsMsgHdr_ST	Msg;
 		u32		Data[3];
 	} Msg;
-	int ret;
 
-	Msg.Msg.msgSrcId  = DVBT_BDA_CONTROL_MSG_ID;
-	Msg.Msg.msgDstId  = HIF_TASK;
-	Msg.Msg.msgFlags  = 0;
-	Msg.Msg.msgType   = MSG_SMS_RF_TUNE_REQ;
+	client->fe_status = FE_HAS_SIGNAL;
+	client->event_fe_state = -1;
+	client->event_unc_state = -1;
+
+	Msg.Msg.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	Msg.Msg.msgDstId = HIF_TASK;
+	Msg.Msg.msgFlags = 0;
+	Msg.Msg.msgType = MSG_SMS_RF_TUNE_REQ;
 	Msg.Msg.msgLength = sizeof(Msg);
 	Msg.Data[0] = fep->frequency;
 	Msg.Data[2] = 12000000;
@@ -307,24 +427,6 @@ static int smsdvb_set_frontend(struct dvb_frontend *fe,
 	default: return -EINVAL;
 	}
 
-	/* Disable LNA, if any. An error is returned if no LNA is present */
-	ret = sms_board_lna_control(client->coredev, 0);
-	if (ret == 0) {
-		fe_status_t status;
-
-		/* tune with LNA off at first */
-		ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
-						  &client->tune_done);
-
-		smsdvb_read_status(fe, &status);
-
-		if (status & FE_HAS_LOCK)
-			return ret;
-
-		/* previous tune didnt lock - enable LNA and tune again */
-		sms_board_lna_control(client->coredev, 1);
-	}
-
 	return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
 					   &client->tune_done);
 }
@@ -349,8 +451,7 @@ static int smsdvb_init(struct dvb_frontend *fe)
 	struct smsdvb_client_t *client =
 		container_of(fe, struct smsdvb_client_t, frontend);
 
-	sms_board_power(client->coredev, 1);
-
+	sms_board_dvb3_event(client, DVB3_EVENT_INIT);
 	return 0;
 }
 
@@ -359,8 +460,7 @@ static int smsdvb_sleep(struct dvb_frontend *fe)
 	struct smsdvb_client_t *client =
 		container_of(fe, struct smsdvb_client_t, frontend);
 
-	sms_board_led_feedback(client->coredev, SMS_LED_OFF);
-	sms_board_power(client->coredev, 0);
+	sms_board_dvb3_event(client, DVB3_EVENT_SLEEP);
 
 	return 0;
 }
@@ -485,7 +585,6 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev,
 	client->coredev = coredev;
 
 	init_completion(&client->tune_done);
-	init_completion(&client->stat_done);
 
 	kmutex_lock(&g_smsdvb_clientslock);
 
@@ -493,8 +592,11 @@ static int smsdvb_hotplug(struct smscore_device_t *coredev,
 
 	kmutex_unlock(&g_smsdvb_clientslock);
 
-	sms_info("success");
+	client->event_fe_state = -1;
+	client->event_unc_state = -1;
+	sms_board_dvb3_event(client, DVB3_EVENT_HOTPLUG);
 
+	sms_info("success");
 	sms_board_setup(coredev);
 
 	return 0;
@@ -547,5 +649,5 @@ module_init(smsdvb_module_init);
 module_exit(smsdvb_module_exit);
 
 MODULE_DESCRIPTION("SMS DVB subsystem adaptation module");
-MODULE_AUTHOR("Siano Mobile Silicon, INC. (uris@siano-ms.com)");
+MODULE_AUTHOR("Siano Mobile Silicon, Inc. (uris@siano-ms.com)");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/siano/smsendian.c b/drivers/media/dvb/siano/smsendian.c
new file mode 100644
index 00000000000..457b6d02ef8
--- /dev/null
+++ b/drivers/media/dvb/siano/smsendian.c
@@ -0,0 +1,102 @@
+/****************************************************************
+
+ Siano Mobile Silicon, Inc.
+ MDTV receiver kernel modules.
+ Copyright (C) 2006-2009, Uri Shkolnik
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ ****************************************************************/
+
+#include <asm/byteorder.h>
+
+#include "smsendian.h"
+#include "smscoreapi.h"
+
+void smsendian_handle_tx_message(void *buffer)
+{
+#ifdef __BIG_ENDIAN
+	struct SmsMsgData_ST *msg = (struct SmsMsgData_ST *)buffer;
+	int i;
+	int msgWords;
+
+	switch (msg->xMsgHeader.msgType) {
+	case MSG_SMS_DATA_DOWNLOAD_REQ:
+	{
+		msg->msgData[0] = le32_to_cpu(msg->msgData[0]);
+		break;
+	}
+
+	default:
+		msgWords = (msg->xMsgHeader.msgLength -
+				sizeof(struct SmsMsgHdr_ST))/4;
+
+		for (i = 0; i < msgWords; i++)
+			msg->msgData[i] = le32_to_cpu(msg->msgData[i]);
+
+		break;
+	}
+#endif /* __BIG_ENDIAN */
+}
+EXPORT_SYMBOL_GPL(smsendian_handle_tx_message);
+
+void smsendian_handle_rx_message(void *buffer)
+{
+#ifdef __BIG_ENDIAN
+	struct SmsMsgData_ST *msg = (struct SmsMsgData_ST *)buffer;
+	int i;
+	int msgWords;
+
+	switch (msg->xMsgHeader.msgType) {
+	case MSG_SMS_GET_VERSION_EX_RES:
+	{
+		struct SmsVersionRes_ST *ver =
+			(struct SmsVersionRes_ST *) msg;
+		ver->ChipModel = le16_to_cpu(ver->ChipModel);
+		break;
+	}
+
+	case MSG_SMS_DVBT_BDA_DATA:
+	case MSG_SMS_DAB_CHANNEL:
+	case MSG_SMS_DATA_MSG:
+	{
+		break;
+	}
+
+	default:
+	{
+		msgWords = (msg->xMsgHeader.msgLength -
+				sizeof(struct SmsMsgHdr_ST))/4;
+
+		for (i = 0; i < msgWords; i++)
+			msg->msgData[i] = le32_to_cpu(msg->msgData[i]);
+
+		break;
+	}
+	}
+#endif /* __BIG_ENDIAN */
+}
+EXPORT_SYMBOL_GPL(smsendian_handle_rx_message);
+
+void smsendian_handle_message_header(void *msg)
+{
+#ifdef __BIG_ENDIAN
+	struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *)msg;
+
+	phdr->msgType = le16_to_cpu(phdr->msgType);
+	phdr->msgLength = le16_to_cpu(phdr->msgLength);
+	phdr->msgFlags = le16_to_cpu(phdr->msgFlags);
+#endif /* __BIG_ENDIAN */
+}
+EXPORT_SYMBOL_GPL(smsendian_handle_message_header);
diff --git a/drivers/media/dvb/siano/smsendian.h b/drivers/media/dvb/siano/smsendian.h
new file mode 100644
index 00000000000..1624d6fd367
--- /dev/null
+++ b/drivers/media/dvb/siano/smsendian.h
@@ -0,0 +1,32 @@
+/****************************************************************
+
+Siano Mobile Silicon, Inc.
+MDTV receiver kernel modules.
+Copyright (C) 2006-2009, Uri Shkolnik
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+****************************************************************/
+
+#ifndef __SMS_ENDIAN_H__
+#define __SMS_ENDIAN_H__
+
+#include <asm/byteorder.h>
+
+extern void smsendian_handle_tx_message(void *buffer);
+extern void smsendian_handle_rx_message(void *buffer);
+extern void smsendian_handle_message_header(void *msg);
+
+#endif /* __SMS_ENDIAN_H__ */
+
diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c
new file mode 100644
index 00000000000..e3d776feeac
--- /dev/null
+++ b/drivers/media/dvb/siano/smsir.c
@@ -0,0 +1,301 @@
+/****************************************************************
+
+ Siano Mobile Silicon, Inc.
+ MDTV receiver kernel modules.
+ Copyright (C) 2006-2009, Uri Shkolnik
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ ****************************************************************/
+
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#include "smscoreapi.h"
+#include "smsir.h"
+#include "sms-cards.h"
+
+/* In order to add new IR remote control -
+ * 1) Add it to the <enum ir_kb_type> @ smsir,h,
+ * 2) Add its map to keyboard_layout_maps below
+ * 3) Set your board (sms-cards sub-module) to use it
+ */
+
+static struct keyboard_layout_map_t keyboard_layout_maps[] = {
+		[SMS_IR_KB_DEFAULT_TV] = {
+			.ir_protocol = IR_RC5,
+			.rc5_kbd_address = KEYBOARD_ADDRESS_TV1,
+			.keyboard_layout_map = {
+					KEY_0, KEY_1, KEY_2,
+					KEY_3, KEY_4, KEY_5,
+					KEY_6, KEY_7, KEY_8,
+					KEY_9, 0, 0, KEY_POWER,
+					KEY_MUTE, 0, 0,
+					KEY_VOLUMEUP, KEY_VOLUMEDOWN,
+					KEY_BRIGHTNESSUP,
+					KEY_BRIGHTNESSDOWN, KEY_CHANNELUP,
+					KEY_CHANNELDOWN,
+					0, 0, 0, 0, 0, 0, 0, 0,
+					0, 0, 0, 0, 0, 0, 0, 0,
+					0, 0, 0, 0, 0, 0, 0, 0,
+					0, 0, 0, 0, 0, 0, 0, 0,
+					0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+			}
+		},
+		[SMS_IR_KB_HCW_SILVER] = {
+			.ir_protocol = IR_RC5,
+			.rc5_kbd_address = KEYBOARD_ADDRESS_LIGHTING1,
+			.keyboard_layout_map = {
+					KEY_0, KEY_1, KEY_2,
+					KEY_3, KEY_4, KEY_5,
+					KEY_6, KEY_7, KEY_8,
+					KEY_9, KEY_TEXT, KEY_RED,
+					KEY_RADIO, KEY_MENU,
+					KEY_SUBTITLE,
+					KEY_MUTE, KEY_VOLUMEUP,
+					KEY_VOLUMEDOWN, KEY_PREVIOUS, 0,
+					KEY_UP, KEY_DOWN, KEY_LEFT,
+					KEY_RIGHT, KEY_VIDEO, KEY_AUDIO,
+					KEY_MHP, KEY_EPG, KEY_TV,
+					0, KEY_NEXTSONG, KEY_EXIT,
+					KEY_CHANNELUP, 	KEY_CHANNELDOWN,
+					KEY_CHANNEL, 0,
+					KEY_PREVIOUSSONG, KEY_ENTER,
+					KEY_SLEEP, 0, 0, KEY_BLUE,
+					0, 0, 0, 0, KEY_GREEN, 0,
+					KEY_PAUSE, 0, KEY_REWIND,
+					0, KEY_FASTFORWARD, KEY_PLAY,
+					KEY_STOP, KEY_RECORD,
+					KEY_YELLOW, 0, 0, KEY_SELECT,
+					KEY_ZOOM, KEY_POWER, 0, 0
+			}
+		},
+		{ } /* Terminating entry */
+};
+
+u32 ir_pos;
+u32	ir_word;
+u32 ir_toggle;
+
+#define RC5_PUSH_BIT(dst, bit, pos)	\
+	{ dst <<= 1; dst |= bit; pos++; }
+
+
+static void sms_ir_rc5_event(struct smscore_device_t *coredev,
+				u32 toggle, u32 addr, u32 cmd)
+{
+	bool toggle_changed;
+	u16 keycode;
+
+	sms_log("IR RC5 word: address %d, command %d, toggle %d",
+				addr, cmd, toggle);
+
+	toggle_changed = ir_toggle != toggle;
+	/* keep toggle */
+	ir_toggle = toggle;
+
+	if (addr !=
+		keyboard_layout_maps[coredev->ir.ir_kb_type].rc5_kbd_address)
+		return; /* Check for valid address */
+
+	keycode =
+		keyboard_layout_maps
+		[coredev->ir.ir_kb_type].keyboard_layout_map[cmd];
+
+	if (!toggle_changed &&
+			(keycode != KEY_VOLUMEUP && keycode != KEY_VOLUMEDOWN))
+		return; /* accept only repeated volume, reject other keys */
+
+	sms_log("kernel input keycode (from ir) %d", keycode);
+	input_report_key(coredev->ir.input_dev, keycode, 1);
+	input_sync(coredev->ir.input_dev);
+
+}
+
+/* decode raw bit pattern to RC5 code */
+/* taken from ir-functions.c */
+static u32 ir_rc5_decode(unsigned int code)
+{
+/*	unsigned int org_code = code;*/
+	unsigned int pair;
+	unsigned int rc5 = 0;
+	int i;
+
+	for (i = 0; i < 14; ++i) {
+		pair = code & 0x3;
+		code >>= 2;
+
+		rc5 <<= 1;
+		switch (pair) {
+		case 0:
+		case 2:
+			break;
+		case 1:
+			rc5 |= 1;
+			break;
+		case 3:
+/*	dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);*/
+			sms_log("bad code");
+			return 0;
+		}
+	}
+/*
+	dprintk(1, "ir-common: code=%x, rc5=%x, start=%x,
+		toggle=%x, address=%x, "
+		"instr=%x\n", rc5, org_code, RC5_START(rc5),
+		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+*/
+	return rc5;
+}
+
+static void sms_rc5_parse_word(struct smscore_device_t *coredev)
+{
+	#define RC5_START(x)    (((x)>>12)&3)
+	#define RC5_TOGGLE(x)   (((x)>>11)&1)
+	#define RC5_ADDR(x)     (((x)>>6)&0x1F)
+	#define RC5_INSTR(x)    ((x)&0x3F)
+
+	int i, j;
+	u32 rc5_word = 0;
+
+	/* Reverse the IR word direction */
+	for (i = 0 ; i < 28 ; i++)
+		RC5_PUSH_BIT(rc5_word, (ir_word>>i)&1, j)
+
+	rc5_word = ir_rc5_decode(rc5_word);
+	/* sms_log("temp = 0x%x, rc5_code = 0x%x", ir_word, rc5_word); */
+
+	sms_ir_rc5_event(coredev,
+				RC5_TOGGLE(rc5_word),
+				RC5_ADDR(rc5_word),
+				RC5_INSTR(rc5_word));
+}
+
+
+static void sms_rc5_accumulate_bits(struct smscore_device_t *coredev,
+		s32 ir_sample)
+{
+	#define RC5_TIME_GRANULARITY	200
+	#define RC5_DEF_BIT_TIME		889
+	#define RC5_MAX_SAME_BIT_CONT	4
+	#define RC5_WORD_LEN			27 /* 28 bit */
+
+	u32 i, j;
+	s32 delta_time;
+	u32 time = (ir_sample > 0) ? ir_sample : (0-ir_sample);
+	u32 level = (ir_sample < 0) ? 0 : 1;
+
+	for (i = RC5_MAX_SAME_BIT_CONT; i > 0; i--) {
+		delta_time = time - (i*RC5_DEF_BIT_TIME) + RC5_TIME_GRANULARITY;
+		if (delta_time < 0)
+			continue; /* not so many consecutive bits */
+		if (delta_time > (2 * RC5_TIME_GRANULARITY)) {
+			/* timeout */
+			if (ir_pos == (RC5_WORD_LEN-1))
+				/* complete last bit */
+				RC5_PUSH_BIT(ir_word, level, ir_pos)
+
+			if (ir_pos == RC5_WORD_LEN)
+				sms_rc5_parse_word(coredev);
+			else if (ir_pos) /* timeout within a word */
+				sms_log("IR error parsing a word");
+
+			ir_pos = 0;
+			ir_word = 0;
+			/* sms_log("timeout %d", time); */
+			break;
+		}
+		/* The time is within the range of this number of bits */
+		for (j = 0 ; j < i ; j++)
+			RC5_PUSH_BIT(ir_word, level, ir_pos)
+
+		break;
+	}
+}
+
+void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
+{
+	#define IR_DATA_RECEIVE_MAX_LEN	520 /* 128*4 + 4 + 4 */
+	u32 i;
+	enum ir_protocol ir_protocol =
+			keyboard_layout_maps[coredev->ir.ir_kb_type]
+					     .ir_protocol;
+	s32 *samples;
+	int count = len>>2;
+
+	samples = (s32 *)buf;
+/*	sms_log("IR buffer received, length = %d", count);*/
+
+	for (i = 0; i < count; i++)
+		if (ir_protocol == IR_RC5)
+			sms_rc5_accumulate_bits(coredev, samples[i]);
+	/*  IR_RCMM not implemented */
+}
+
+int sms_ir_init(struct smscore_device_t *coredev)
+{
+	struct input_dev *input_dev;
+
+	sms_log("Allocating input device");
+	input_dev = input_allocate_device();
+	if (!input_dev)	{
+		sms_err("Not enough memory");
+		return -ENOMEM;
+	}
+
+	coredev->ir.input_dev = input_dev;
+	coredev->ir.ir_kb_type =
+		sms_get_board(smscore_get_board_id(coredev))->ir_kb_type;
+	coredev->ir.keyboard_layout_map =
+		keyboard_layout_maps[coredev->ir.ir_kb_type].
+				keyboard_layout_map;
+	sms_log("IR remote keyboard type is %d", coredev->ir.ir_kb_type);
+
+	coredev->ir.controller = 0;	/* Todo: vega/nova SPI number */
+	coredev->ir.timeout = IR_DEFAULT_TIMEOUT;
+	sms_log("IR port %d, timeout %d ms",
+			coredev->ir.controller, coredev->ir.timeout);
+
+	snprintf(coredev->ir.name,
+				IR_DEV_NAME_MAX_LEN,
+				"SMS IR w/kbd type %d",
+				coredev->ir.ir_kb_type);
+	input_dev->name = coredev->ir.name;
+	input_dev->phys = coredev->ir.name;
+	input_dev->dev.parent = coredev->device;
+
+	/* Key press events only */
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+
+	sms_log("Input device (IR) %s is set for key events", input_dev->name);
+
+	if (input_register_device(input_dev)) {
+		sms_err("Failed to register device");
+		input_free_device(input_dev);
+		return -EACCES;
+	}
+
+	return 0;
+}
+
+void sms_ir_exit(struct smscore_device_t *coredev)
+{
+	if (coredev->ir.input_dev)
+		input_unregister_device(coredev->ir.input_dev);
+
+	sms_log("");
+}
+
diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h
new file mode 100644
index 00000000000..b7d703e2d33
--- /dev/null
+++ b/drivers/media/dvb/siano/smsir.h
@@ -0,0 +1,93 @@
+/****************************************************************
+
+Siano Mobile Silicon, Inc.
+MDTV receiver kernel modules.
+Copyright (C) 2006-2009, Uri Shkolnik
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+****************************************************************/
+
+#ifndef __SMS_IR_H__
+#define __SMS_IR_H__
+
+#include <linux/input.h>
+
+#define IR_DEV_NAME_MAX_LEN		23 /* "SMS IR kbd type nn\0" */
+#define IR_KEYBOARD_LAYOUT_SIZE	64
+#define IR_DEFAULT_TIMEOUT		100
+
+enum ir_kb_type {
+	SMS_IR_KB_DEFAULT_TV,
+	SMS_IR_KB_HCW_SILVER
+};
+
+enum rc5_keyboard_address {
+	KEYBOARD_ADDRESS_TV1 = 0,
+	KEYBOARD_ADDRESS_TV2 = 1,
+	KEYBOARD_ADDRESS_TELETEXT = 2,
+	KEYBOARD_ADDRESS_VIDEO = 3,
+	KEYBOARD_ADDRESS_LV1 = 4,
+	KEYBOARD_ADDRESS_VCR1 = 5,
+	KEYBOARD_ADDRESS_VCR2 = 6,
+	KEYBOARD_ADDRESS_EXPERIMENTAL = 7,
+	KEYBOARD_ADDRESS_SAT1 = 8,
+	KEYBOARD_ADDRESS_CAMERA = 9,
+	KEYBOARD_ADDRESS_SAT2 = 10,
+	KEYBOARD_ADDRESS_CDV = 12,
+	KEYBOARD_ADDRESS_CAMCORDER = 13,
+	KEYBOARD_ADDRESS_PRE_AMP = 16,
+	KEYBOARD_ADDRESS_TUNER = 17,
+	KEYBOARD_ADDRESS_RECORDER1 = 18,
+	KEYBOARD_ADDRESS_PRE_AMP1 = 19,
+	KEYBOARD_ADDRESS_CD_PLAYER = 20,
+	KEYBOARD_ADDRESS_PHONO = 21,
+	KEYBOARD_ADDRESS_SATA = 22,
+	KEYBOARD_ADDRESS_RECORDER2 = 23,
+	KEYBOARD_ADDRESS_CDR = 26,
+	KEYBOARD_ADDRESS_LIGHTING = 29,
+	KEYBOARD_ADDRESS_LIGHTING1 = 30, /* KEYBOARD_ADDRESS_HCW_SILVER */
+	KEYBOARD_ADDRESS_PHONE = 31,
+	KEYBOARD_ADDRESS_NOT_RC5 = 0xFFFF
+};
+
+enum ir_protocol {
+	IR_RC5,
+	IR_RCMM
+};
+
+struct keyboard_layout_map_t {
+	enum ir_protocol ir_protocol;
+	enum rc5_keyboard_address rc5_kbd_address;
+	u16 keyboard_layout_map[IR_KEYBOARD_LAYOUT_SIZE];
+};
+
+struct smscore_device_t;
+
+struct ir_t {
+	struct input_dev *input_dev;
+	enum ir_kb_type ir_kb_type;
+	char name[IR_DEV_NAME_MAX_LEN+1];
+	u16 *keyboard_layout_map;
+	u32 timeout;
+	u32 controller;
+};
+
+int sms_ir_init(struct smscore_device_t *coredev);
+void sms_ir_exit(struct smscore_device_t *coredev);
+void sms_ir_event(struct smscore_device_t *coredev,
+			const char *buf, int len);
+
+#endif /* __SMS_IR_H__ */
+
diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c
new file mode 100644
index 00000000000..dfaa49a53f3
--- /dev/null
+++ b/drivers/media/dvb/siano/smssdio.c
@@ -0,0 +1,357 @@
+/*
+ *  smssdio.c - Siano 1xxx SDIO interface driver
+ *
+ *  Copyright 2008 Pierre Ossman
+ *
+ * Based on code by Siano Mobile Silicon, Inc.,
+ * Copyright (C) 2006-2008, Uri Shkolnik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ *
+ * This hardware is a bit odd in that all transfers should be done
+ * to/from the SMSSDIO_DATA register, yet the "increase address" bit
+ * always needs to be set.
+ *
+ * Also, buffers from the card are always aligned to 128 byte
+ * boundaries.
+ */
+
+/*
+ * General cleanup notes:
+ *
+ * - only typedefs should be name *_t
+ *
+ * - use ERR_PTR and friends for smscore_register_device()
+ *
+ * - smscore_getbuffer should zero fields
+ *
+ * Fix stop command
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+
+#include "smscoreapi.h"
+#include "sms-cards.h"
+
+/* Registers */
+
+#define SMSSDIO_DATA		0x00
+#define SMSSDIO_INT		0x04
+
+static const struct sdio_device_id smssdio_ids[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
+	 .driver_data = SMS1XXX_BOARD_SIANO_STELLAR},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0),
+	 .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0),
+	 .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0),
+	 .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE),
+	 .driver_data = SMS1XXX_BOARD_SIANO_VEGA},
+	{ /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(sdio, smssdio_ids);
+
+struct smssdio_device {
+	struct sdio_func *func;
+
+	struct smscore_device_t *coredev;
+
+	struct smscore_buffer_t *split_cb;
+};
+
+/*******************************************************************/
+/* Siano core callbacks                                            */
+/*******************************************************************/
+
+static int smssdio_sendrequest(void *context, void *buffer, size_t size)
+{
+	int ret;
+	struct smssdio_device *smsdev;
+
+	smsdev = context;
+
+	sdio_claim_host(smsdev->func);
+
+	while (size >= smsdev->func->cur_blksize) {
+		ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
+		if (ret)
+			goto out;
+
+		buffer += smsdev->func->cur_blksize;
+		size -= smsdev->func->cur_blksize;
+	}
+
+	if (size) {
+		ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
+				       buffer, size);
+	}
+
+out:
+	sdio_release_host(smsdev->func);
+
+	return ret;
+}
+
+/*******************************************************************/
+/* SDIO callbacks                                                  */
+/*******************************************************************/
+
+static void smssdio_interrupt(struct sdio_func *func)
+{
+	int ret, isr;
+
+	struct smssdio_device *smsdev;
+	struct smscore_buffer_t *cb;
+	struct SmsMsgHdr_ST *hdr;
+	size_t size;
+
+	smsdev = sdio_get_drvdata(func);
+
+	/*
+	 * The interrupt register has no defined meaning. It is just
+	 * a way of turning of the level triggered interrupt.
+	 */
+	isr = sdio_readb(func, SMSSDIO_INT, &ret);
+	if (ret) {
+		dev_err(&smsdev->func->dev,
+			"Unable to read interrupt register!\n");
+		return;
+	}
+
+	if (smsdev->split_cb == NULL) {
+		cb = smscore_getbuffer(smsdev->coredev);
+		if (!cb) {
+			dev_err(&smsdev->func->dev,
+				"Unable to allocate data buffer!\n");
+			return;
+		}
+
+		ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
+		if (ret) {
+			dev_err(&smsdev->func->dev,
+				"Error %d reading initial block!\n", ret);
+			return;
+		}
+
+		hdr = cb->p;
+
+		if (hdr->msgFlags & MSG_HDR_FLAG_SPLIT_MSG) {
+			smsdev->split_cb = cb;
+			return;
+		}
+
+		size = hdr->msgLength - smsdev->func->cur_blksize;
+	} else {
+		cb = smsdev->split_cb;
+		hdr = cb->p;
+
+		size = hdr->msgLength - sizeof(struct SmsMsgHdr_ST);
+
+		smsdev->split_cb = NULL;
+	}
+
+	if (hdr->msgLength > smsdev->func->cur_blksize) {
+		void *buffer;
+
+		size = ALIGN(size, 128);
+		buffer = cb->p + hdr->msgLength;
+
+		BUG_ON(smsdev->func->cur_blksize != 128);
+
+		/*
+		 * First attempt to transfer all of it in one go...
+		 */
+		ret = sdio_read_blocks(smsdev->func, buffer,
+				       SMSSDIO_DATA, size / 128);
+		if (ret && ret != -EINVAL) {
+			smscore_putbuffer(smsdev->coredev, cb);
+			dev_err(&smsdev->func->dev,
+				"Error %d reading data from card!\n", ret);
+			return;
+		}
+
+		/*
+		 * ..then fall back to one block at a time if that is
+		 * not possible...
+		 *
+		 * (we have to do this manually because of the
+		 * problem with the "increase address" bit)
+		 */
+		if (ret == -EINVAL) {
+			while (size) {
+				ret = sdio_read_blocks(smsdev->func,
+						       buffer, SMSSDIO_DATA, 1);
+				if (ret) {
+					smscore_putbuffer(smsdev->coredev, cb);
+					dev_err(&smsdev->func->dev,
+						"Error %d reading "
+						"data from card!\n", ret);
+					return;
+				}
+
+				buffer += smsdev->func->cur_blksize;
+				if (size > smsdev->func->cur_blksize)
+					size -= smsdev->func->cur_blksize;
+				else
+					size = 0;
+			}
+		}
+	}
+
+	cb->size = hdr->msgLength;
+	cb->offset = 0;
+
+	smscore_onresponse(smsdev->coredev, cb);
+}
+
+static int smssdio_probe(struct sdio_func *func,
+			 const struct sdio_device_id *id)
+{
+	int ret;
+
+	int board_id;
+	struct smssdio_device *smsdev;
+	struct smsdevice_params_t params;
+
+	board_id = id->driver_data;
+
+	smsdev = kzalloc(sizeof(struct smssdio_device), GFP_KERNEL);
+	if (!smsdev)
+		return -ENOMEM;
+
+	smsdev->func = func;
+
+	memset(&params, 0, sizeof(struct smsdevice_params_t));
+
+	params.device = &func->dev;
+	params.buffer_size = 0x5000;	/* ?? */
+	params.num_buffers = 22;	/* ?? */
+	params.context = smsdev;
+
+	snprintf(params.devpath, sizeof(params.devpath),
+		 "sdio\\%s", sdio_func_id(func));
+
+	params.sendrequest_handler = smssdio_sendrequest;
+
+	params.device_type = sms_get_board(board_id)->type;
+
+	if (params.device_type != SMS_STELLAR)
+		params.flags |= SMS_DEVICE_FAMILY2;
+	else {
+		/*
+		 * FIXME: Stellar needs special handling...
+		 */
+		ret = -ENODEV;
+		goto free;
+	}
+
+	ret = smscore_register_device(&params, &smsdev->coredev);
+	if (ret < 0)
+		goto free;
+
+	smscore_set_board_id(smsdev->coredev, board_id);
+
+	sdio_claim_host(func);
+
+	ret = sdio_enable_func(func);
+	if (ret)
+		goto release;
+
+	ret = sdio_set_block_size(func, 128);
+	if (ret)
+		goto disable;
+
+	ret = sdio_claim_irq(func, smssdio_interrupt);
+	if (ret)
+		goto disable;
+
+	sdio_set_drvdata(func, smsdev);
+
+	sdio_release_host(func);
+
+	ret = smscore_start_device(smsdev->coredev);
+	if (ret < 0)
+		goto reclaim;
+
+	return 0;
+
+reclaim:
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+disable:
+	sdio_disable_func(func);
+release:
+	sdio_release_host(func);
+	smscore_unregister_device(smsdev->coredev);
+free:
+	kfree(smsdev);
+
+	return ret;
+}
+
+static void smssdio_remove(struct sdio_func *func)
+{
+	struct smssdio_device *smsdev;
+
+	smsdev = sdio_get_drvdata(func);
+
+	/* FIXME: racy! */
+	if (smsdev->split_cb)
+		smscore_putbuffer(smsdev->coredev, smsdev->split_cb);
+
+	smscore_unregister_device(smsdev->coredev);
+
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+	sdio_disable_func(func);
+	sdio_release_host(func);
+
+	kfree(smsdev);
+}
+
+static struct sdio_driver smssdio_driver = {
+	.name = "smssdio",
+	.id_table = smssdio_ids,
+	.probe = smssdio_probe,
+	.remove = smssdio_remove,
+};
+
+/*******************************************************************/
+/* Module functions                                                */
+/*******************************************************************/
+
+int smssdio_module_init(void)
+{
+	int ret = 0;
+
+	printk(KERN_INFO "smssdio: Siano SMS1xxx SDIO driver\n");
+	printk(KERN_INFO "smssdio: Copyright Pierre Ossman\n");
+
+	ret = sdio_register_driver(&smssdio_driver);
+
+	return ret;
+}
+
+void smssdio_module_exit(void)
+{
+	sdio_unregister_driver(&smssdio_driver);
+}
+
+module_init(smssdio_module_init);
+module_exit(smssdio_module_exit);
+
+MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver");
+MODULE_AUTHOR("Pierre Ossman");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index 71c65f544c0..cb8a358b731 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -1,23 +1,23 @@
-/*
- *  Driver for the Siano SMS1xxx USB dongle
- *
- *  author: Anatoly Greenblat
- *
- *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation;
- *
- *  Software distributed under the License is distributed on an "AS IS"
- *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
- *
- *  See the GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+/****************************************************************
+
+Siano Mobile Silicon, Inc.
+MDTV receiver kernel modules.
+Copyright (C) 2005-2009, Uri Shkolnik, Anatoly Greenblat
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+****************************************************************/
 
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -26,6 +26,7 @@
 
 #include "smscoreapi.h"
 #include "sms-cards.h"
+#include "smsendian.h"
 
 static int sms_dbg;
 module_param_named(debug, sms_dbg, int, 0644);
@@ -64,15 +65,16 @@ static void smsusb_onresponse(struct urb *urb)
 	struct smsusb_urb_t *surb = (struct smsusb_urb_t *) urb->context;
 	struct smsusb_device_t *dev = surb->dev;
 
-	if (urb->status < 0) {
-		sms_err("error, urb status %d, %d bytes",
+	if (urb->status == -ESHUTDOWN) {
+		sms_err("error, urb status %d (-ESHUTDOWN), %d bytes",
 			urb->status, urb->actual_length);
 		return;
 	}
 
-	if (urb->actual_length > 0) {
-		struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) surb->cb->p;
+	if ((urb->actual_length > 0) && (urb->status == 0)) {
+		struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *)surb->cb->p;
 
+		smsendian_handle_message_header(phdr);
 		if (urb->actual_length >= phdr->msgLength) {
 			surb->cb->size = phdr->msgLength;
 
@@ -109,7 +111,10 @@ static void smsusb_onresponse(struct urb *urb)
 				"msglen %d actual %d",
 				phdr->msgLength, urb->actual_length);
 		}
-	}
+	} else
+		sms_err("error, urb status %d, %d bytes",
+			urb->status, urb->actual_length);
+
 
 exit_and_resubmit:
 	smsusb_submit_urb(dev, surb);
@@ -176,6 +181,7 @@ static int smsusb_sendrequest(void *context, void *buffer, size_t size)
 	struct smsusb_device_t *dev = (struct smsusb_device_t *) context;
 	int dummy;
 
+	smsendian_handle_message_header((struct SmsMsgHdr_ST *)buffer);
 	return usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2),
 			    buffer, size, &dummy, 1000);
 }
@@ -333,8 +339,8 @@ static int smsusb_init_device(struct usb_interface *intf, int board_id)
 	case SMS_VEGA:
 		dev->buffer_size = USB2_BUFFER_SIZE;
 		dev->response_alignment =
-			dev->udev->ep_in[1]->desc.wMaxPacketSize -
-			sizeof(struct SmsMsgHdr_ST);
+		    le16_to_cpu(dev->udev->ep_in[1]->desc.wMaxPacketSize) -
+		    sizeof(struct SmsMsgHdr_ST);
 
 		params.flags |= SMS_DEVICE_FAMILY2;
 		break;
@@ -479,7 +485,6 @@ static int smsusb_resume(struct usb_interface *intf)
 }
 
 struct usb_device_id smsusb_id_table[] = {
-#ifdef CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS
 	{ USB_DEVICE(0x187f, 0x0010),
 		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
 	{ USB_DEVICE(0x187f, 0x0100),
@@ -490,7 +495,6 @@ struct usb_device_id smsusb_id_table[] = {
 		.driver_info = SMS1XXX_BOARD_SIANO_NOVA_B },
 	{ USB_DEVICE(0x187f, 0x0300),
 		.driver_info = SMS1XXX_BOARD_SIANO_VEGA },
-#endif
 	{ USB_DEVICE(0x2040, 0x1700),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT },
 	{ USB_DEVICE(0x2040, 0x1800),
@@ -521,8 +525,13 @@ struct usb_device_id smsusb_id_table[] = {
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0x5590),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
-	{ }		/* Terminating entry */
-};
+	{ USB_DEVICE(0x187f, 0x0202),
+		.driver_info = SMS1XXX_BOARD_SIANO_NICE },
+	{ USB_DEVICE(0x187f, 0x0301),
+		.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
+	{ } /* Terminating entry */
+	};
+
 MODULE_DEVICE_TABLE(usb, smsusb_id_table);
 
 static struct usb_driver smsusb_driver = {
@@ -548,14 +557,14 @@ int smsusb_module_init(void)
 
 void smsusb_module_exit(void)
 {
-	sms_debug("");
 	/* Regular USB Cleanup */
 	usb_deregister(&smsusb_driver);
+	sms_info("end");
 }
 
 module_init(smsusb_module_init);
 module_exit(smsusb_module_exit);
 
-MODULE_DESCRIPTION("Driver for the Siano SMS1XXX USB dongle");
+MODULE_DESCRIPTION("Driver for the Siano SMS1xxx USB dongle");
 MODULE_AUTHOR("Siano Mobile Silicon, INC. (uris@siano-ms.com)");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index e4d0900d512..53884814161 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -89,6 +89,7 @@
 
 static void p_to_t(u8 const *buf, long int length, u16 pid,
 		   u8 *counter, struct dvb_demux_feed *feed);
+static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, size_t len);
 
 
 int av7110_record_cb(struct dvb_filter_pes2ts *p2t, u8 *buf, size_t len)
@@ -192,8 +193,6 @@ int av7110_av_start_play(struct av7110 *av7110, int av)
 		ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AV_PES, 0);
 		break;
 	}
-	if (!ret)
-		ret = av7110->playing;
 	return ret;
 }
 
@@ -437,6 +436,45 @@ static void play_audio_cb(u8 *buf, int count, void *priv)
 	aux_ring_buffer_write(&av7110->aout, buf, count);
 }
 
+
+#define FREE_COND_TS (dvb_ringbuffer_free(rb) >= 4096)
+
+static ssize_t ts_play(struct av7110 *av7110, const char __user *buf,
+		       unsigned long count, int nonblock, int type)
+{
+	struct dvb_ringbuffer *rb;
+	u8 *kb;
+	unsigned long todo = count;
+
+	dprintk(2, "%s: type %d cnt %lu\n", __func__, type, count);
+
+	rb = (type) ? &av7110->avout : &av7110->aout;
+	kb = av7110->kbuf[type];
+
+	if (!kb)
+		return -ENOBUFS;
+
+	if (nonblock && !FREE_COND_TS)
+		return -EWOULDBLOCK;
+
+	while (todo >= TS_SIZE) {
+		if (!FREE_COND_TS) {
+			if (nonblock)
+				return count - todo;
+			if (wait_event_interruptible(rb->queue, FREE_COND_TS))
+				return count - todo;
+		}
+		if (copy_from_user(kb, buf, TS_SIZE))
+			return -EFAULT;
+		write_ts_to_decoder(av7110, type, kb, TS_SIZE);
+		todo -= TS_SIZE;
+		buf += TS_SIZE;
+	}
+
+	return count - todo;
+}
+
+
 #define FREE_COND (dvb_ringbuffer_free(&av7110->avout) >= 20 * 1024 && \
 		   dvb_ringbuffer_free(&av7110->aout) >= 20 * 1024)
 
@@ -780,11 +818,37 @@ static void p_to_t(u8 const *buf, long int length, u16 pid, u8 *counter,
 }
 
 
+static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, size_t len)
+{
+	struct ipack *ipack = &av7110->ipack[type];
+
+	if (buf[1] & TRANS_ERROR) {
+		av7110_ipack_reset(ipack);
+		return -1;
+	}
+
+	if (!(buf[3] & PAYLOAD))
+		return -1;
+
+	if (buf[1] & PAY_START)
+		av7110_ipack_flush(ipack);
+
+	if (buf[3] & ADAPT_FIELD) {
+		len -= buf[4] + 1;
+		buf += buf[4] + 1;
+		if (!len)
+			return 0;
+	}
+
+	av7110_ipack_instant_repack(buf + 4, len - 4, ipack);
+	return 0;
+}
+
+
 int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t len)
 {
 	struct dvb_demux *demux = feed->demux;
 	struct av7110 *av7110 = (struct av7110 *) demux->priv;
-	struct ipack *ipack = &av7110->ipack[feed->pes_type];
 
 	dprintk(2, "av7110:%p, \n", av7110);
 
@@ -804,20 +868,7 @@ int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t l
 		return -1;
 	}
 
-	if (!(buf[3] & 0x10)) /* no payload? */
-		return -1;
-	if (buf[1] & 0x40)
-		av7110_ipack_flush(ipack);
-
-	if (buf[3] & 0x20) {  /* adaptation field? */
-		len -= buf[4] + 1;
-		buf += buf[4] + 1;
-		if (!len)
-			return 0;
-	}
-
-	av7110_ipack_instant_repack(buf + 4, len - 4, &av7110->ipack[feed->pes_type]);
-	return 0;
+	return write_ts_to_decoder(av7110, feed->pes_type, buf, len);
 }
 
 
@@ -916,6 +967,7 @@ static ssize_t dvb_video_write(struct file *file, const char __user *buf,
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct av7110 *av7110 = dvbdev->priv;
+	unsigned char c;
 
 	dprintk(2, "av7110:%p, \n", av7110);
 
@@ -925,7 +977,12 @@ static ssize_t dvb_video_write(struct file *file, const char __user *buf,
 	if (av7110->videostate.stream_source != VIDEO_SOURCE_MEMORY)
 		return -EPERM;
 
-	return dvb_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 1);
+	if (get_user(c, buf))
+		return -EFAULT;
+	if (c == 0x47 && count % TS_SIZE == 0)
+		return ts_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 1);
+	else
+		return dvb_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 1);
 }
 
 static unsigned int dvb_audio_poll(struct file *file, poll_table *wait)
@@ -952,6 +1009,7 @@ static ssize_t dvb_audio_write(struct file *file, const char __user *buf,
 {
 	struct dvb_device *dvbdev = file->private_data;
 	struct av7110 *av7110 = dvbdev->priv;
+	unsigned char c;
 
 	dprintk(2, "av7110:%p, \n", av7110);
 
@@ -959,7 +1017,13 @@ static ssize_t dvb_audio_write(struct file *file, const char __user *buf,
 		printk(KERN_ERR "not audio source memory\n");
 		return -EPERM;
 	}
-	return dvb_aplay(av7110, buf, count, file->f_flags & O_NONBLOCK, 0);
+
+	if (get_user(c, buf))
+		return -EFAULT;
+	if (c == 0x47 && count % TS_SIZE == 0)
+		return ts_play(av7110, buf, count, file->f_flags & O_NONBLOCK, 0);
+	else
+		return dvb_aplay(av7110, buf, count, file->f_flags & O_NONBLOCK, 0);
 }
 
 static u8 iframe_header[] = { 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x80, 0x00, 0x00 };
@@ -1062,7 +1126,6 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file,
 			if (ret)
 				break;
 		}
-
 		if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY) {
 			if (av7110->playing == RP_AV) {
 				ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0);
@@ -1122,20 +1185,16 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file,
 	case VIDEO_SET_DISPLAY_FORMAT:
 	{
 		video_displayformat_t format = (video_displayformat_t) arg;
-
 		switch (format) {
 		case VIDEO_PAN_SCAN:
 			av7110->display_panscan = VID_PAN_SCAN_PREF;
 			break;
-
 		case VIDEO_LETTER_BOX:
 			av7110->display_panscan = VID_VC_AND_PS_PREF;
 			break;
-
 		case VIDEO_CENTER_CUT_OUT:
 			av7110->display_panscan = VID_CENTRE_CUT_PREF;
 			break;
-
 		default:
 			ret = -EINVAL;
 		}
@@ -1183,7 +1242,8 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file,
 
 	case VIDEO_SLOWMOTION:
 		if (av7110->playing&RP_VIDEO) {
-			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Slow, 2, 0, 0);
+			if (av7110->trickmode != TRICK_SLOW)
+				ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Slow, 2, 0, 0);
 			if (!ret)
 				ret = vidcom(av7110, AV_VIDEO_CMD_SLOW, arg);
 		} else {
@@ -1207,7 +1267,6 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file,
 	case VIDEO_CLEAR_BUFFER:
 		dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout);
 		av7110_ipack_reset(&av7110->ipack[1]);
-
 		if (av7110->playing == RP_AV) {
 			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY,
 					    __Play, 2, AV_PES, 0);
@@ -1228,13 +1287,13 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file,
 		break;
 
 	case VIDEO_SET_STREAMTYPE:
-
 		break;
 
 	default:
 		ret = -ENOIOCTLCMD;
 		break;
 	}
+
 	return ret;
 }
 
@@ -1309,7 +1368,6 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file,
 
 	case AUDIO_CHANNEL_SELECT:
 		av7110->audiostate.channel_select = (audio_channel_select_t) arg;
-
 		switch(av7110->audiostate.channel_select) {
 		case AUDIO_STEREO:
 			ret = audcom(av7110, AUDIO_CMD_STEREO);
@@ -1320,7 +1378,6 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file,
 					msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220);
 			}
 			break;
-
 		case AUDIO_MONO_LEFT:
 			ret = audcom(av7110, AUDIO_CMD_MONO_L);
 			if (!ret) {
@@ -1330,7 +1387,6 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file,
 					msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0200);
 			}
 			break;
-
 		case AUDIO_MONO_RIGHT:
 			ret = audcom(av7110, AUDIO_CMD_MONO_R);
 			if (!ret) {
@@ -1340,7 +1396,6 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file,
 					msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0210);
 			}
 			break;
-
 		default:
 			ret = -EINVAL;
 			break;
@@ -1366,21 +1421,24 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file,
 			ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY,
 					    __Play, 2, AV_PES, 0);
 		break;
-	case AUDIO_SET_ID:
 
+	case AUDIO_SET_ID:
 		break;
+
 	case AUDIO_SET_MIXER:
 	{
 		struct audio_mixer *amix = (struct audio_mixer *)parg;
-
 		ret = av7110_set_volume(av7110, amix->volume_left, amix->volume_right);
 		break;
 	}
+
 	case AUDIO_SET_STREAMTYPE:
 		break;
+
 	default:
 		ret = -ENOIOCTLCMD;
 	}
+
 	return ret;
 }
 
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index 5e3f88911a1..e162691b515 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -1089,7 +1089,7 @@ int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc)
 		else {
 			int i, len = dc->x0-dc->color+1;
 			u8 __user *colors = (u8 __user *)dc->data;
-			u8 r, g, b, blend;
+			u8 r, g = 0, b = 0, blend = 0;
 			ret = 0;
 			for (i = 0; i<len; i++) {
 				if (get_user(r, colors + i * 4) ||
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 2210cff738e..ce64c6214cc 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -458,7 +458,7 @@ static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
 	dprintk(2, "VIDIOC_ENUMINPUT: %d\n", i->index);
 
 	if (av7110->analog_tuner_flags) {
-		if (i->index < 0 || i->index >= 4)
+		if (i->index >= 4)
 			return -EINVAL;
 	} else {
 		if (i->index != 0)
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 855fe74b640..8ea91522767 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1413,7 +1413,7 @@ static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
 static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
 {
 	dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
-	if (i->index < 0 || i->index >= KNC1_INPUTS)
+	if (i->index >= KNC1_INPUTS)
 		return -EINVAL;
 	memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
 	return 0;
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 83e9e7750c8..e48380c4899 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -47,6 +47,9 @@
 #include "bsru6.h"
 #include "bsbe1.h"
 #include "tdhd1.h"
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "isl6423.h"
 
 static int diseqc_method;
 module_param(diseqc_method, int, 0444);
@@ -425,6 +428,44 @@ static u8 read_pwm(struct budget* budget)
 	return pwm;
 }
 
+static struct stv090x_config tt1600_stv090x_config = {
+	.device			= STV0903,
+	.demod_mode		= STV090x_SINGLE,
+	.clk_mode		= STV090x_CLK_EXT,
+
+	.xtal			= 27000000,
+	.address		= 0x68,
+	.ref_clk		= 27000000,
+
+	.ts1_mode		= STV090x_TSMODE_DVBCI,
+	.ts2_mode		= STV090x_TSMODE_SERIAL_CONTINUOUS,
+
+	.repeater_level		= STV090x_RPTLEVEL_16,
+
+	.tuner_init		= NULL,
+	.tuner_set_mode		= NULL,
+	.tuner_set_frequency	= NULL,
+	.tuner_get_frequency	= NULL,
+	.tuner_set_bandwidth	= NULL,
+	.tuner_get_bandwidth	= NULL,
+	.tuner_set_bbgain	= NULL,
+	.tuner_get_bbgain	= NULL,
+	.tuner_set_refclk	= NULL,
+	.tuner_get_status	= NULL,
+};
+
+static struct stv6110x_config tt1600_stv6110x_config = {
+	.addr			= 0x60,
+	.refclk			= 27000000,
+};
+
+static struct isl6423_config tt1600_isl6423_config = {
+	.current_max		= SEC_CURRENT_515m,
+	.curlim			= SEC_CURRENT_LIM_ON,
+	.mod_extern		= 1,
+	.addr			= 0x08,
+};
+
 static void frontend_init(struct budget *budget)
 {
 	(void)alps_bsbe1_config; /* avoid warning */
@@ -566,6 +607,48 @@ static void frontend_init(struct budget *budget)
 			}
 			break;
 		}
+
+	case 0x101c: { /* TT S2-1600 */
+			struct stv6110x_devctl *ctl;
+			saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
+			msleep(50);
+			saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
+			msleep(250);
+
+			budget->dvb_frontend = dvb_attach(stv090x_attach,
+							  &tt1600_stv090x_config,
+							  &budget->i2c_adap,
+							  STV090x_DEMODULATOR_0);
+
+			if (budget->dvb_frontend) {
+
+				ctl = dvb_attach(stv6110x_attach,
+						 budget->dvb_frontend,
+						 &tt1600_stv6110x_config,
+						 &budget->i2c_adap);
+
+				tt1600_stv090x_config.tuner_init	  = ctl->tuner_init;
+				tt1600_stv090x_config.tuner_set_mode	  = ctl->tuner_set_mode;
+				tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
+				tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
+				tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+				tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+				tt1600_stv090x_config.tuner_set_bbgain	  = ctl->tuner_set_bbgain;
+				tt1600_stv090x_config.tuner_get_bbgain	  = ctl->tuner_get_bbgain;
+				tt1600_stv090x_config.tuner_set_refclk	  = ctl->tuner_set_refclk;
+				tt1600_stv090x_config.tuner_get_status	  = ctl->tuner_get_status;
+
+				dvb_attach(isl6423_attach,
+					budget->dvb_frontend,
+					&budget->i2c_adap,
+					&tt1600_isl6423_config);
+
+			} else {
+				dvb_frontend_detach(budget->dvb_frontend);
+				budget->dvb_frontend = NULL;
+			}
+		}
+		break;
 	}
 
 	if (budget->dvb_frontend == NULL) {
@@ -641,6 +724,7 @@ MAKE_BUDGET_INFO(ttbc,	"TT-Budget/WinTV-NOVA-C  PCI",	BUDGET_TT);
 MAKE_BUDGET_INFO(ttbt,	"TT-Budget/WinTV-NOVA-T  PCI",	BUDGET_TT);
 MAKE_BUDGET_INFO(satel,	"SATELCO Multimedia PCI",	BUDGET_TT_HW_DISEQC);
 MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT);
 MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
 MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
 MAKE_BUDGET_INFO(fsact,	 "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY);
@@ -653,6 +737,7 @@ static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
 	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1016),
 	MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018),
+	MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c),
 	MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
 	MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
 	MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60),
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 61357620229..ed9cd7ad060 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -33,6 +33,10 @@
 
  History:
 
+ Version 0.46:
+	Removed usb_dsbr100_open/close calls and radio->users counter. Also,
+	radio->muted changed to radio->status and suspend/resume calls updated.
+
  Version 0.45:
 	Converted to v4l2_device.
 
@@ -100,8 +104,8 @@
  */
 #include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 
-#define DRIVER_VERSION "v0.45"
-#define RADIO_VERSION KERNEL_VERSION(0, 4, 5)
+#define DRIVER_VERSION "v0.46"
+#define RADIO_VERSION KERNEL_VERSION(0, 4, 6)
 
 #define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
 #define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
@@ -121,13 +125,15 @@ devices, that would be 76 and 91.  */
 #define FREQ_MAX 108.0
 #define FREQ_MUL 16000
 
+/* defines for radio->status */
+#define STARTED	0
+#define STOPPED	1
+
 #define videodev_to_radio(d) container_of(d, struct dsbr100_device, videodev)
 
 static int usb_dsbr100_probe(struct usb_interface *intf,
 			     const struct usb_device_id *id);
 static void usb_dsbr100_disconnect(struct usb_interface *intf);
-static int usb_dsbr100_open(struct file *file);
-static int usb_dsbr100_close(struct file *file);
 static int usb_dsbr100_suspend(struct usb_interface *intf,
 						pm_message_t message);
 static int usb_dsbr100_resume(struct usb_interface *intf);
@@ -145,9 +151,8 @@ struct dsbr100_device {
 	struct mutex lock;	/* buffer locking */
 	int curfreq;
 	int stereo;
-	int users;
 	int removed;
-	int muted;
+	int status;
 };
 
 static struct usb_device_id usb_dsbr100_device_table [] = {
@@ -201,7 +206,7 @@ static int dsbr100_start(struct dsbr100_device *radio)
 		goto usb_control_msg_failed;
 	}
 
-	radio->muted = 0;
+	radio->status = STARTED;
 	mutex_unlock(&radio->lock);
 	return (radio->transfer_buffer)[0];
 
@@ -244,7 +249,7 @@ static int dsbr100_stop(struct dsbr100_device *radio)
 		goto usb_control_msg_failed;
 	}
 
-	radio->muted = 1;
+	radio->status = STOPPED;
 	mutex_unlock(&radio->lock);
 	return (radio->transfer_buffer)[0];
 
@@ -258,12 +263,12 @@ usb_control_msg_failed:
 }
 
 /* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
-static int dsbr100_setfreq(struct dsbr100_device *radio, int freq)
+static int dsbr100_setfreq(struct dsbr100_device *radio)
 {
 	int retval;
 	int request;
+	int freq = (radio->curfreq / 16 * 80) / 1000 + 856;
 
-	freq = (freq / 16 * 80) / 1000 + 856;
 	mutex_lock(&radio->lock);
 
 	retval = usb_control_msg(radio->usbdev,
@@ -431,7 +436,7 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 	radio->curfreq = f->frequency;
 	mutex_unlock(&radio->lock);
 
-	retval = dsbr100_setfreq(radio, radio->curfreq);
+	retval = dsbr100_setfreq(radio);
 	if (retval < 0)
 		dev_warn(&radio->usbdev->dev, "Set frequency failed\n");
 	return 0;
@@ -473,7 +478,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = radio->muted;
+		ctrl->value = radio->status;
 		return 0;
 	}
 	return -EINVAL;
@@ -543,65 +548,27 @@ static int vidioc_s_audio(struct file *file, void *priv,
 	return 0;
 }
 
-static int usb_dsbr100_open(struct file *file)
-{
-	struct dsbr100_device *radio = video_drvdata(file);
-	int retval;
-
-	lock_kernel();
-	radio->users = 1;
-	radio->muted = 1;
-
-	retval = dsbr100_start(radio);
-	if (retval < 0) {
-		dev_warn(&radio->usbdev->dev,
-			 "Radio did not start up properly\n");
-		radio->users = 0;
-		unlock_kernel();
-		return -EIO;
-	}
-
-	retval = dsbr100_setfreq(radio, radio->curfreq);
-	if (retval < 0)
-		dev_warn(&radio->usbdev->dev,
-			"set frequency failed\n");
-
-	unlock_kernel();
-	return 0;
-}
-
-static int usb_dsbr100_close(struct file *file)
-{
-	struct dsbr100_device *radio = video_drvdata(file);
-	int retval;
-
-	if (!radio)
-		return -ENODEV;
-
-	mutex_lock(&radio->lock);
-	radio->users = 0;
-	mutex_unlock(&radio->lock);
-
-	if (!radio->removed) {
-		retval = dsbr100_stop(radio);
-		if (retval < 0) {
-			dev_warn(&radio->usbdev->dev,
-				"dsbr100_stop failed\n");
-		}
-
-	}
-	return 0;
-}
-
 /* Suspend device - stop device. */
 static int usb_dsbr100_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	struct dsbr100_device *radio = usb_get_intfdata(intf);
 	int retval;
 
-	retval = dsbr100_stop(radio);
-	if (retval < 0)
-		dev_warn(&intf->dev, "dsbr100_stop failed\n");
+	if (radio->status == STARTED) {
+		retval = dsbr100_stop(radio);
+		if (retval < 0)
+			dev_warn(&intf->dev, "dsbr100_stop failed\n");
+
+		/* After dsbr100_stop() status set to STOPPED.
+		 * If we want driver to start radio on resume
+		 * we set status equal to STARTED.
+		 * On resume we will check status and run radio if needed.
+		 */
+
+		mutex_lock(&radio->lock);
+		radio->status = STARTED;
+		mutex_unlock(&radio->lock);
+	}
 
 	dev_info(&intf->dev, "going into suspend..\n");
 
@@ -614,9 +581,11 @@ static int usb_dsbr100_resume(struct usb_interface *intf)
 	struct dsbr100_device *radio = usb_get_intfdata(intf);
 	int retval;
 
-	retval = dsbr100_start(radio);
-	if (retval < 0)
-		dev_warn(&intf->dev, "dsbr100_start failed\n");
+	if (radio->status == STARTED) {
+		retval = dsbr100_start(radio);
+		if (retval < 0)
+			dev_warn(&intf->dev, "dsbr100_start failed\n");
+	}
 
 	dev_info(&intf->dev, "coming out of suspend..\n");
 
@@ -636,8 +605,6 @@ static void usb_dsbr100_video_device_release(struct video_device *videodev)
 /* File system interface */
 static const struct v4l2_file_operations usb_dsbr100_fops = {
 	.owner		= THIS_MODULE,
-	.open		= usb_dsbr100_open,
-	.release	= usb_dsbr100_close,
 	.ioctl		= video_ioctl2,
 };
 
@@ -695,9 +662,9 @@ static int usb_dsbr100_probe(struct usb_interface *intf,
 	mutex_init(&radio->lock);
 
 	radio->removed = 0;
-	radio->users = 0;
 	radio->usbdev = interface_to_usbdev(intf);
 	radio->curfreq = FREQ_MIN * FREQ_MUL;
+	radio->status = STOPPED;
 
 	video_set_drvdata(&radio->videodev, radio);
 
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index cab19d05e02..837467f9380 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -64,6 +64,7 @@
 #include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
 #include <linux/version.h>	/* for KERNEL_VERSION MACRO */
+#include <linux/mutex.h>
 
 /* driver and module definitions */
 #define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>"
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 5cf6c45b91f..49c4aab95da 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -49,7 +49,6 @@ struct fmi
 	int io;
 	int curvol; /* 1 or 0 */
 	unsigned long curfreq; /* freq in kHz */
-	__u32 flags;
 	struct mutex lock;
 };
 
@@ -57,7 +56,7 @@ static struct fmi fmi_card;
 static struct pnp_dev *dev;
 
 /* freq is in 1/16 kHz to internal number, hw precision is 50 kHz */
-/* It is only useful to give freq in intervall of 800 (=0.05Mhz),
+/* It is only useful to give freq in interval of 800 (=0.05Mhz),
  * other bits will be truncated, e.g 92.7400016 -> 92.7, but
  * 92.7400017 -> 92.75
  */
@@ -142,7 +141,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 static int vidioc_g_tuner(struct file *file, void *priv,
 					struct v4l2_tuner *v)
 {
-	int mult;
 	struct fmi *fmi = video_drvdata(file);
 
 	if (v->index > 0)
@@ -150,11 +148,10 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 
 	strlcpy(v->name, "FM", sizeof(v->name));
 	v->type = V4L2_TUNER_RADIO;
-	mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
-	v->rangelow = RSF16_MINFREQ / mult;
-	v->rangehigh = RSF16_MAXFREQ / mult;
+	v->rangelow = RSF16_MINFREQ;
+	v->rangehigh = RSF16_MAXFREQ;
 	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
-	v->capability = fmi->flags & V4L2_TUNER_CAP_LOW;
+	v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
 	v->audmode = V4L2_TUNER_MODE_STEREO;
 	v->signal = fmi_getsigstr(fmi);
 	return 0;
@@ -171,8 +168,6 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 {
 	struct fmi *fmi = video_drvdata(file);
 
-	if (!(fmi->flags & V4L2_TUNER_CAP_LOW))
-		f->frequency *= 1000;
 	if (f->frequency < RSF16_MINFREQ ||
 			f->frequency > RSF16_MAXFREQ)
 		return -EINVAL;
@@ -189,8 +184,6 @@ static int vidioc_g_frequency(struct file *file, void *priv,
 
 	f->type = V4L2_TUNER_RADIO;
 	f->frequency = fmi->curfreq;
-	if (!(fmi->flags & V4L2_TUNER_CAP_LOW))
-		f->frequency /= 1000;
 	return 0;
 }
 
@@ -347,7 +340,6 @@ static int __init fmi_init(void)
 		return res;
 	}
 
-	fmi->flags = V4L2_TUNER_CAP_LOW;
 	strlcpy(fmi->vdev.name, v4l2_dev->name, sizeof(fmi->vdev.name));
 	fmi->vdev.v4l2_dev = v4l2_dev;
 	fmi->vdev.fops = &fmi_fops;
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 935ff9bcdfc..a11414f648d 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -61,13 +61,12 @@ struct fmr2
 	int stereo; /* card is producing stereo audio */
 	unsigned long curfreq; /* freq in kHz */
 	int card_type;
-	u32 flags;
 };
 
 static struct fmr2 fmr2_card;
 
 /* hw precision is 12.5 kHz
- * It is only useful to give freq in intervall of 200 (=0.0125Mhz),
+ * It is only useful to give freq in interval of 200 (=0.0125Mhz),
  * other bits will be truncated
  */
 #define RSF16_ENCODE(x)	((x) / 200 + 856)
@@ -221,7 +220,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 static int vidioc_g_tuner(struct file *file, void *priv,
 					struct v4l2_tuner *v)
 {
-	int mult;
 	struct fmr2 *fmr2 = video_drvdata(file);
 
 	if (v->index > 0)
@@ -230,13 +228,12 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 	strlcpy(v->name, "FM", sizeof(v->name));
 	v->type = V4L2_TUNER_RADIO;
 
-	mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
-	v->rangelow = RSF16_MINFREQ / mult;
-	v->rangehigh = RSF16_MAXFREQ / mult;
-	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
-	v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW;
-	v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO:
-				V4L2_TUNER_MODE_MONO;
+	v->rangelow = RSF16_MINFREQ;
+	v->rangehigh = RSF16_MAXFREQ;
+	v->rxsubchans = fmr2->stereo ? V4L2_TUNER_SUB_STEREO :
+					V4L2_TUNER_SUB_MONO;
+	v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
+	v->audmode = V4L2_TUNER_MODE_STEREO;
 	mutex_lock(&fmr2->lock);
 	v->signal = fmr2_getsigstr(fmr2);
 	mutex_unlock(&fmr2->lock);
@@ -254,8 +251,6 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 {
 	struct fmr2 *fmr2 = video_drvdata(file);
 
-	if (!(fmr2->flags & V4L2_TUNER_CAP_LOW))
-		f->frequency *= 1000;
 	if (f->frequency < RSF16_MINFREQ ||
 			f->frequency > RSF16_MAXFREQ)
 		return -EINVAL;
@@ -279,8 +274,6 @@ static int vidioc_g_frequency(struct file *file, void *priv,
 
 	f->type = V4L2_TUNER_RADIO;
 	f->frequency = fmr2->curfreq;
-	if (!(fmr2->flags & V4L2_TUNER_CAP_LOW))
-		f->frequency /= 1000;
 	return 0;
 }
 
@@ -406,7 +399,6 @@ static int __init fmr2_init(void)
 	strlcpy(v4l2_dev->name, "sf16fmr2", sizeof(v4l2_dev->name));
 	fmr2->io = io;
 	fmr2->stereo = 1;
-	fmr2->flags = V4L2_TUNER_CAP_LOW;
 	mutex_init(&fmr2->lock);
 
 	if (!request_region(fmr2->io, 2, "sf16fmr2")) {
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index bd945d04dc9..640421ceb24 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -1214,7 +1214,6 @@ static int si470x_fops_release(struct file *file)
 		usb_autopm_put_interface(radio->intf);
 	}
 
-unlock:
 	mutex_unlock(&radio->disconnect_lock);
 
 done:
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9d48da2fb01..94f440535c6 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -440,6 +440,24 @@ config VIDEO_ADV7175
 	  To compile this driver as a module, choose M here: the
 	  module will be called adv7175.
 
+config VIDEO_THS7303
+	tristate "THS7303 Video Amplifier"
+	depends on I2C
+	help
+	  Support for TI THS7303 video amplifier
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ths7303.
+
+config VIDEO_ADV7343
+	tristate "ADV7343 video encoder"
+	depends on I2C
+	help
+	  Support for Analog Devices I2C bus based ADV7343 encoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7343.
+
 comment "Video improvement chips"
 
 config VIDEO_UPD64031A
@@ -694,7 +712,7 @@ config VIDEO_CAFE_CCIC
 
 config SOC_CAMERA
 	tristate "SoC camera support"
-	depends on VIDEO_V4L2 && HAS_DMA
+	depends on VIDEO_V4L2 && HAS_DMA && I2C
 	select VIDEOBUF_GEN
 	help
 	  SoC Camera is a common API to several cameras, not connecting
@@ -758,10 +776,14 @@ config VIDEO_MX1
 	---help---
 	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
 
+config MX3_VIDEO
+	bool
+
 config VIDEO_MX3
 	tristate "i.MX3x Camera Sensor Interface driver"
 	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
 	select VIDEOBUF_DMA_CONTIG
+	select MX3_VIDEO
 	---help---
 	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
 
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 3f1a0350a56..7fb3add1b38 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -12,6 +12,8 @@ omap2cam-objs	:=	omap24xxcam.o omap24xxcam-dma.o
 
 videodev-objs	:=	v4l2-dev.o v4l2-ioctl.o v4l2-device.o
 
+# V4L2 core modules
+
 obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o
 ifeq ($(CONFIG_COMPAT),y)
   obj-$(CONFIG_VIDEO_DEV) += v4l2-compat-ioctl32.o
@@ -23,21 +25,15 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
   obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
 endif
 
-obj-$(CONFIG_VIDEO_TUNER) += tuner.o
+# All i2c modules must come first:
 
-obj-$(CONFIG_VIDEO_BT848) += bt8xx/
-obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
 obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
 obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
 obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o
-
 obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
 obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o
 obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o
-obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o
-obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o
-obj-$(CONFIG_VIDEO_W9966) += w9966.o
-
 obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
 obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
 obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
@@ -49,16 +45,47 @@ obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
 obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
 obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
 obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
+obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o
 obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
 obj-$(CONFIG_VIDEO_BT819) += bt819.o
 obj-$(CONFIG_VIDEO_BT856) += bt856.o
 obj-$(CONFIG_VIDEO_BT866) += bt866.o
 obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
+obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
+obj-$(CONFIG_VIDEO_VINO) += indycam.o
+obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
+obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
+obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
+obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
+obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
+obj-$(CONFIG_VIDEO_M52790) += m52790.o
+obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
+obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
+obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
+obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
+obj-$(CONFIG_VIDEO_CX25840) += cx25840/
+obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
+obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
+obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
+obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
+obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
 
-obj-$(CONFIG_VIDEO_ZORAN) += zoran/
+obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
+obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
+obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
+obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
+obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
+obj-$(CONFIG_SOC_CAMERA_TW9910)		+= tw9910.o
 
+# And now the v4l2 drivers:
+
+obj-$(CONFIG_VIDEO_BT848) += bt8xx/
+obj-$(CONFIG_VIDEO_ZORAN) += zoran/
+obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o
+obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o
+obj-$(CONFIG_VIDEO_W9966) += w9966.o
 obj-$(CONFIG_VIDEO_PMS) += pms.o
-obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o
+obj-$(CONFIG_VIDEO_VINO) += vino.o
 obj-$(CONFIG_VIDEO_STRADIS) += stradis.o
 obj-$(CONFIG_VIDEO_CPIA) += cpia.o
 obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o
@@ -69,17 +96,7 @@ obj-$(CONFIG_VIDEO_CX88) += cx88/
 obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
 obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
 obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
-obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
-obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
 obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
-obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
-obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
-obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
-obj-$(CONFIG_VIDEO_M52790) += m52790.o
-obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
-obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
-obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
-obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
 obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
 obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
 obj-$(CONFIG_VIDEO_MXB) += mxb.o
@@ -92,19 +109,12 @@ obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
 obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o
 obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o
 obj-$(CONFIG_VIDEO_BTCX)  += btcx-risc.o
-obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
 
 obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
-obj-$(CONFIG_VIDEO_CX25840) += cx25840/
-obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
-obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 
 obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
-obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
-
-obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
 
 obj-$(CONFIG_USB_DABUSB)        += dabusb.o
 obj-$(CONFIG_USB_OV511)         += ov511.o
@@ -134,24 +144,21 @@ obj-$(CONFIG_VIDEO_CX18) += cx18/
 obj-$(CONFIG_VIDEO_VIVI) += vivi.o
 obj-$(CONFIG_VIDEO_CX23885) += cx23885/
 
+obj-$(CONFIG_VIDEO_OMAP2)		+= omap2cam.o
+obj-$(CONFIG_SOC_CAMERA)		+= soc_camera.o
+obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
+# soc-camera host drivers have to be linked after camera drivers
 obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
 obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
 obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
-obj-$(CONFIG_VIDEO_OMAP2)		+= omap2cam.o
-obj-$(CONFIG_SOC_CAMERA)		+= soc_camera.o
-obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
-obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
-obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
-obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
-obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
-obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
-obj-$(CONFIG_SOC_CAMERA_TW9910)		+= tw9910.o
 
 obj-$(CONFIG_VIDEO_AU0828) += au0828/
 
 obj-$(CONFIG_USB_VIDEO_CLASS)	+= uvc/
 
+obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/video/adv7343.c b/drivers/media/video/adv7343.c
new file mode 100644
index 00000000000..30f5caf5dda
--- /dev/null
+++ b/drivers/media/video/adv7343.c
@@ -0,0 +1,534 @@
+/*
+ * adv7343 - ADV7343 Video Encoder Driver
+ *
+ * The encoder hardware does not support SECAM.
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/i2c.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/videodev2.h>
+#include <linux/uaccess.h>
+#include <linux/version.h>
+
+#include <media/adv7343.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+#include "adv7343_regs.h"
+
+MODULE_DESCRIPTION("ADV7343 video encoder driver");
+MODULE_LICENSE("GPL");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+struct adv7343_state {
+	struct v4l2_subdev sd;
+	u8 reg00;
+	u8 reg01;
+	u8 reg02;
+	u8 reg35;
+	u8 reg80;
+	u8 reg82;
+	int bright;
+	int hue;
+	int gain;
+	u32 output;
+	v4l2_std_id std;
+};
+
+static inline struct adv7343_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct adv7343_state, sd);
+}
+
+static inline int adv7343_write(struct v4l2_subdev *sd, u8 reg, u8 value)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static const u8 adv7343_init_reg_val[] = {
+	ADV7343_SOFT_RESET, ADV7343_SOFT_RESET_DEFAULT,
+	ADV7343_POWER_MODE_REG, ADV7343_POWER_MODE_REG_DEFAULT,
+
+	ADV7343_HD_MODE_REG1, ADV7343_HD_MODE_REG1_DEFAULT,
+	ADV7343_HD_MODE_REG2, ADV7343_HD_MODE_REG2_DEFAULT,
+	ADV7343_HD_MODE_REG3, ADV7343_HD_MODE_REG3_DEFAULT,
+	ADV7343_HD_MODE_REG4, ADV7343_HD_MODE_REG4_DEFAULT,
+	ADV7343_HD_MODE_REG5, ADV7343_HD_MODE_REG5_DEFAULT,
+	ADV7343_HD_MODE_REG6, ADV7343_HD_MODE_REG6_DEFAULT,
+	ADV7343_HD_MODE_REG7, ADV7343_HD_MODE_REG7_DEFAULT,
+
+	ADV7343_SD_MODE_REG1, ADV7343_SD_MODE_REG1_DEFAULT,
+	ADV7343_SD_MODE_REG2, ADV7343_SD_MODE_REG2_DEFAULT,
+	ADV7343_SD_MODE_REG3, ADV7343_SD_MODE_REG3_DEFAULT,
+	ADV7343_SD_MODE_REG4, ADV7343_SD_MODE_REG4_DEFAULT,
+	ADV7343_SD_MODE_REG5, ADV7343_SD_MODE_REG5_DEFAULT,
+	ADV7343_SD_MODE_REG6, ADV7343_SD_MODE_REG6_DEFAULT,
+	ADV7343_SD_MODE_REG7, ADV7343_SD_MODE_REG7_DEFAULT,
+	ADV7343_SD_MODE_REG8, ADV7343_SD_MODE_REG8_DEFAULT,
+
+	ADV7343_SD_HUE_REG, ADV7343_SD_HUE_REG_DEFAULT,
+	ADV7343_SD_CGMS_WSS0, ADV7343_SD_CGMS_WSS0_DEFAULT,
+	ADV7343_SD_BRIGHTNESS_WSS, ADV7343_SD_BRIGHTNESS_WSS_DEFAULT,
+};
+
+/*
+ * 			    2^32
+ * FSC(reg) =  FSC (HZ) * --------
+ *			  27000000
+ */
+static const struct adv7343_std_info stdinfo[] = {
+	{
+		/* FSC(Hz) = 3,579,545.45 Hz */
+		SD_STD_NTSC, 569408542, V4L2_STD_NTSC,
+	}, {
+		/* FSC(Hz) = 3,575,611.00 Hz */
+		SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M,
+	}, {
+		/* FSC(Hz) = 3,582,056.00 */
+		SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc,
+	}, {
+		/* FSC(Hz) = 4,433,618.75 Hz */
+		SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N,
+	}, {
+		/* FSC(Hz) = 4,433,618.75 Hz */
+		SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL,
+	}, {
+		/* FSC(Hz) = 4,433,618.75 Hz */
+		SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443,
+	}, {
+		/* FSC(Hz) = 4,433,618.75 Hz */
+		SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60,
+	},
+};
+
+static int adv7343_setstd(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct adv7343_state *state = to_state(sd);
+	struct adv7343_std_info *std_info;
+	int output_idx, num_std;
+	char *fsc_ptr;
+	u8 reg, val;
+	int err = 0;
+	int i = 0;
+
+	output_idx = state->output;
+
+	std_info = (struct adv7343_std_info *)stdinfo;
+	num_std = ARRAY_SIZE(stdinfo);
+
+	for (i = 0; i < num_std; i++) {
+		if (std_info[i].stdid & std)
+			break;
+	}
+
+	if (i == num_std) {
+		v4l2_dbg(1, debug, sd,
+				"Invalid std or std is not supported: %llx\n",
+						(unsigned long long)std);
+		return -EINVAL;
+	}
+
+	/* Set the standard */
+	val = state->reg80 & (~(SD_STD_MASK));
+	val |= std_info[i].standard_val3;
+	err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val);
+	if (err < 0)
+		goto setstd_exit;
+
+	state->reg80 = val;
+
+	/* Configure the input mode register */
+	val = state->reg01 & (~((u8) INPUT_MODE_MASK));
+	val |= SD_INPUT_MODE;
+	err = adv7343_write(sd, ADV7343_MODE_SELECT_REG, val);
+	if (err < 0)
+		goto setstd_exit;
+
+	state->reg01 = val;
+
+	/* Program the sub carrier frequency registers */
+	fsc_ptr = (unsigned char *)&std_info[i].fsc_val;
+	reg = ADV7343_FSC_REG0;
+	for (i = 0; i < 4; i++, reg++, fsc_ptr++) {
+		err = adv7343_write(sd, reg, *fsc_ptr);
+		if (err < 0)
+			goto setstd_exit;
+	}
+
+	val = state->reg80;
+
+	/* Filter settings */
+	if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443))
+		val &= 0x03;
+	else if (std & ~V4L2_STD_SECAM)
+		val |= 0x04;
+
+	err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val);
+	if (err < 0)
+		goto setstd_exit;
+
+	state->reg80 = val;
+
+setstd_exit:
+	if (err != 0)
+		v4l2_err(sd, "Error setting std, write failed\n");
+
+	return err;
+}
+
+static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
+{
+	struct adv7343_state *state = to_state(sd);
+	unsigned char val;
+	int err = 0;
+
+	if (output_type > ADV7343_SVIDEO_ID) {
+		v4l2_dbg(1, debug, sd,
+			"Invalid output type or output type not supported:%d\n",
+								output_type);
+		return -EINVAL;
+	}
+
+	/* Enable Appropriate DAC */
+	val = state->reg00 & 0x03;
+
+	if (output_type == ADV7343_COMPOSITE_ID)
+		val |= ADV7343_COMPOSITE_POWER_VALUE;
+	else if (output_type == ADV7343_COMPONENT_ID)
+		val |= ADV7343_COMPONENT_POWER_VALUE;
+	else
+		val |= ADV7343_SVIDEO_POWER_VALUE;
+
+	err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val);
+	if (err < 0)
+		goto setoutput_exit;
+
+	state->reg00 = val;
+
+	/* Enable YUV output */
+	val = state->reg02 | YUV_OUTPUT_SELECT;
+	err = adv7343_write(sd, ADV7343_MODE_REG0, val);
+	if (err < 0)
+		goto setoutput_exit;
+
+	state->reg02 = val;
+
+	/* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */
+	val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI);
+	err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val);
+	if (err < 0)
+		goto setoutput_exit;
+
+	state->reg82 = val;
+
+	/* configure ED/HD Color DAC Swap and ED/HD RGB Input Enable bit to
+	 * zero */
+	val = state->reg35 & (HD_RGB_INPUT_DI & HD_DAC_SWAP_DI);
+	err = adv7343_write(sd, ADV7343_HD_MODE_REG6, val);
+	if (err < 0)
+		goto setoutput_exit;
+
+	state->reg35 = val;
+
+setoutput_exit:
+	if (err != 0)
+		v4l2_err(sd, "Error setting output, write failed\n");
+
+	return err;
+}
+
+static int adv7343_log_status(struct v4l2_subdev *sd)
+{
+	struct adv7343_state *state = to_state(sd);
+
+	v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std);
+	v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" :
+			((state->output == 1) ? "Component" : "S-Video"));
+	return 0;
+}
+
+static int adv7343_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_BRIGHTNESS:
+		return v4l2_ctrl_query_fill(qc, ADV7343_BRIGHTNESS_MIN,
+						ADV7343_BRIGHTNESS_MAX, 1,
+						ADV7343_BRIGHTNESS_DEF);
+	case V4L2_CID_HUE:
+		return v4l2_ctrl_query_fill(qc, ADV7343_HUE_MIN,
+						ADV7343_HUE_MAX, 1 ,
+						ADV7343_HUE_DEF);
+	case V4L2_CID_GAIN:
+		return v4l2_ctrl_query_fill(qc, ADV7343_GAIN_MIN,
+						ADV7343_GAIN_MAX, 1,
+						ADV7343_GAIN_DEF);
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int adv7343_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct adv7343_state *state = to_state(sd);
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		if (ctrl->value < ADV7343_BRIGHTNESS_MIN ||
+					ctrl->value > ADV7343_BRIGHTNESS_MAX) {
+			v4l2_dbg(1, debug, sd,
+					"invalid brightness settings %d\n",
+								ctrl->value);
+			return -ERANGE;
+		}
+
+		state->bright = ctrl->value;
+		err = adv7343_write(sd, ADV7343_SD_BRIGHTNESS_WSS,
+					state->bright);
+		break;
+
+	case V4L2_CID_HUE:
+		if (ctrl->value < ADV7343_HUE_MIN ||
+					ctrl->value > ADV7343_HUE_MAX) {
+			v4l2_dbg(1, debug, sd, "invalid hue settings %d\n",
+								ctrl->value);
+			return -ERANGE;
+		}
+
+		state->hue = ctrl->value;
+		err = adv7343_write(sd, ADV7343_SD_HUE_REG, state->hue);
+		break;
+
+	case V4L2_CID_GAIN:
+		if (ctrl->value < ADV7343_GAIN_MIN ||
+					ctrl->value > ADV7343_GAIN_MAX) {
+			v4l2_dbg(1, debug, sd, "invalid gain settings %d\n",
+								ctrl->value);
+			return -ERANGE;
+		}
+
+		if ((ctrl->value > POSITIVE_GAIN_MAX) &&
+			(ctrl->value < NEGATIVE_GAIN_MIN)) {
+			v4l2_dbg(1, debug, sd,
+				"gain settings not within the specified range\n");
+			return -ERANGE;
+		}
+
+		state->gain = ctrl->value;
+		err = adv7343_write(sd, ADV7343_DAC2_OUTPUT_LEVEL, state->gain);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (err < 0)
+		v4l2_err(sd, "Failed to set the encoder controls\n");
+
+	return err;
+}
+
+static int adv7343_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct adv7343_state *state = to_state(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = state->bright;
+		break;
+
+	case V4L2_CID_HUE:
+		ctrl->value = state->hue;
+		break;
+
+	case V4L2_CID_GAIN:
+		ctrl->value = state->gain;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int adv7343_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *chip)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7343, 0);
+}
+
+static const struct v4l2_subdev_core_ops adv7343_core_ops = {
+	.log_status	= adv7343_log_status,
+	.g_chip_ident	= adv7343_g_chip_ident,
+	.g_ctrl		= adv7343_g_ctrl,
+	.s_ctrl		= adv7343_s_ctrl,
+	.queryctrl	= adv7343_queryctrl,
+};
+
+static int adv7343_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct adv7343_state *state = to_state(sd);
+	int err = 0;
+
+	if (state->std == std)
+		return 0;
+
+	err = adv7343_setstd(sd, std);
+	if (!err)
+		state->std = std;
+
+	return err;
+}
+
+static int adv7343_s_routing(struct v4l2_subdev *sd,
+		u32 input, u32 output, u32 config)
+{
+	struct adv7343_state *state = to_state(sd);
+	int err = 0;
+
+	if (state->output == output)
+		return 0;
+
+	err = adv7343_setoutput(sd, output);
+	if (!err)
+		state->output = output;
+
+	return err;
+}
+
+static const struct v4l2_subdev_video_ops adv7343_video_ops = {
+	.s_std_output	= adv7343_s_std_output,
+	.s_routing	= adv7343_s_routing,
+};
+
+static const struct v4l2_subdev_ops adv7343_ops = {
+	.core	= &adv7343_core_ops,
+	.video	= &adv7343_video_ops,
+};
+
+static int adv7343_initialize(struct v4l2_subdev *sd)
+{
+	struct adv7343_state *state = to_state(sd);
+	int err = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(adv7343_init_reg_val); i += 2) {
+
+		err = adv7343_write(sd, adv7343_init_reg_val[i],
+					adv7343_init_reg_val[i+1]);
+		if (err) {
+			v4l2_err(sd, "Error initializing\n");
+			return err;
+		}
+	}
+
+	/* Configure for default video standard */
+	err = adv7343_setoutput(sd, state->output);
+	if (err < 0) {
+		v4l2_err(sd, "Error setting output during init\n");
+		return -EINVAL;
+	}
+
+	err = adv7343_setstd(sd, state->std);
+	if (err < 0) {
+		v4l2_err(sd, "Error setting std during init\n");
+		return -EINVAL;
+	}
+
+	return err;
+}
+
+static int adv7343_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct adv7343_state *state;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	v4l_info(client, "chip found @ 0x%x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	state = kzalloc(sizeof(struct adv7343_state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+
+	state->reg00	= 0x80;
+	state->reg01	= 0x00;
+	state->reg02	= 0x20;
+	state->reg35	= 0x00;
+	state->reg80	= ADV7343_SD_MODE_REG1_DEFAULT;
+	state->reg82	= ADV7343_SD_MODE_REG2_DEFAULT;
+
+	state->output = ADV7343_COMPOSITE_ID;
+	state->std = V4L2_STD_NTSC;
+
+	v4l2_i2c_subdev_init(&state->sd, client, &adv7343_ops);
+	return adv7343_initialize(&state->sd);
+}
+
+static int adv7343_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+	v4l2_device_unregister_subdev(sd);
+	kfree(to_state(sd));
+
+	return 0;
+}
+
+static const struct i2c_device_id adv7343_id[] = {
+	{"adv7343", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, adv7343_id);
+
+static struct i2c_driver adv7343_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "adv7343",
+	},
+	.probe		= adv7343_probe,
+	.remove		= adv7343_remove,
+	.id_table	= adv7343_id,
+};
+
+static __init int init_adv7343(void)
+{
+	return i2c_add_driver(&adv7343_driver);
+}
+
+static __exit void exit_adv7343(void)
+{
+	i2c_del_driver(&adv7343_driver);
+}
+
+module_init(init_adv7343);
+module_exit(exit_adv7343);
diff --git a/drivers/media/video/adv7343_regs.h b/drivers/media/video/adv7343_regs.h
new file mode 100644
index 00000000000..3431045b33d
--- /dev/null
+++ b/drivers/media/video/adv7343_regs.h
@@ -0,0 +1,185 @@
+/*
+ * ADV7343 encoder related structure and register definitions
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ADV7343_REG_H
+#define ADV7343_REGS_H
+
+struct adv7343_std_info {
+	u32 standard_val3;
+	u32 fsc_val;
+	v4l2_std_id stdid;
+};
+
+/* Register offset macros */
+#define ADV7343_POWER_MODE_REG		(0x00)
+#define ADV7343_MODE_SELECT_REG		(0x01)
+#define ADV7343_MODE_REG0		(0x02)
+
+#define ADV7343_DAC2_OUTPUT_LEVEL	(0x0b)
+
+#define ADV7343_SOFT_RESET		(0x17)
+
+#define ADV7343_HD_MODE_REG1		(0x30)
+#define ADV7343_HD_MODE_REG2		(0x31)
+#define ADV7343_HD_MODE_REG3		(0x32)
+#define ADV7343_HD_MODE_REG4		(0x33)
+#define ADV7343_HD_MODE_REG5		(0x34)
+#define ADV7343_HD_MODE_REG6		(0x35)
+
+#define ADV7343_HD_MODE_REG7		(0x39)
+
+#define ADV7343_SD_MODE_REG1		(0x80)
+#define ADV7343_SD_MODE_REG2		(0x82)
+#define ADV7343_SD_MODE_REG3		(0x83)
+#define ADV7343_SD_MODE_REG4		(0x84)
+#define ADV7343_SD_MODE_REG5		(0x86)
+#define ADV7343_SD_MODE_REG6		(0x87)
+#define ADV7343_SD_MODE_REG7		(0x88)
+#define ADV7343_SD_MODE_REG8		(0x89)
+
+#define ADV7343_FSC_REG0		(0x8C)
+#define ADV7343_FSC_REG1		(0x8D)
+#define ADV7343_FSC_REG2		(0x8E)
+#define ADV7343_FSC_REG3		(0x8F)
+
+#define ADV7343_SD_CGMS_WSS0		(0x99)
+
+#define ADV7343_SD_HUE_REG		(0xA0)
+#define ADV7343_SD_BRIGHTNESS_WSS	(0xA1)
+
+/* Default values for the registers */
+#define ADV7343_POWER_MODE_REG_DEFAULT		(0x10)
+#define ADV7343_HD_MODE_REG1_DEFAULT		(0x3C)	/* Changed Default
+							   720p EAVSAV code*/
+#define ADV7343_HD_MODE_REG2_DEFAULT		(0x01)	/* Changed Pixel data
+							   valid */
+#define ADV7343_HD_MODE_REG3_DEFAULT		(0x00)	/* Color delay 0 clks */
+#define ADV7343_HD_MODE_REG4_DEFAULT		(0xE8)	/* Changed */
+#define ADV7343_HD_MODE_REG5_DEFAULT		(0x08)
+#define ADV7343_HD_MODE_REG6_DEFAULT		(0x00)
+#define ADV7343_HD_MODE_REG7_DEFAULT		(0x00)
+#define ADV7343_SD_MODE_REG8_DEFAULT		(0x00)
+#define ADV7343_SOFT_RESET_DEFAULT		(0x02)
+#define ADV7343_COMPOSITE_POWER_VALUE		(0x80)
+#define ADV7343_COMPONENT_POWER_VALUE		(0x1C)
+#define ADV7343_SVIDEO_POWER_VALUE		(0x60)
+#define ADV7343_SD_HUE_REG_DEFAULT		(127)
+#define ADV7343_SD_BRIGHTNESS_WSS_DEFAULT	(0x03)
+
+#define ADV7343_SD_CGMS_WSS0_DEFAULT		(0x10)
+
+#define ADV7343_SD_MODE_REG1_DEFAULT		(0x00)
+#define ADV7343_SD_MODE_REG2_DEFAULT		(0xC9)
+#define ADV7343_SD_MODE_REG3_DEFAULT		(0x10)
+#define ADV7343_SD_MODE_REG4_DEFAULT		(0x01)
+#define ADV7343_SD_MODE_REG5_DEFAULT		(0x02)
+#define ADV7343_SD_MODE_REG6_DEFAULT		(0x0C)
+#define ADV7343_SD_MODE_REG7_DEFAULT		(0x04)
+#define ADV7343_SD_MODE_REG8_DEFAULT		(0x00)
+
+/* Bit masks for Mode Select Register */
+#define INPUT_MODE_MASK			(0x70)
+#define SD_INPUT_MODE			(0x00)
+#define HD_720P_INPUT_MODE		(0x10)
+#define HD_1080I_INPUT_MODE		(0x10)
+
+/* Bit masks for Mode Register 0 */
+#define TEST_PATTERN_BLACK_BAR_EN	(0x04)
+#define YUV_OUTPUT_SELECT		(0x20)
+#define RGB_OUTPUT_SELECT		(0xDF)
+
+/* Bit masks for DAC output levels */
+#define DAC_OUTPUT_LEVEL_MASK		(0xFF)
+#define POSITIVE_GAIN_MAX		(0x40)
+#define POSITIVE_GAIN_MIN		(0x00)
+#define NEGATIVE_GAIN_MAX		(0xFF)
+#define NEGATIVE_GAIN_MIN		(0xC0)
+
+/* Bit masks for soft reset register */
+#define SOFT_RESET			(0x02)
+
+/* Bit masks for HD Mode Register 1 */
+#define OUTPUT_STD_MASK		(0x03)
+#define OUTPUT_STD_SHIFT	(0)
+#define OUTPUT_STD_EIA0_2	(0x00)
+#define OUTPUT_STD_EIA0_1	(0x01)
+#define OUTPUT_STD_FULL		(0x02)
+#define EMBEDDED_SYNC		(0x04)
+#define EXTERNAL_SYNC		(0xFB)
+#define STD_MODE_SHIFT		(3)
+#define STD_MODE_MASK		(0x1F)
+#define STD_MODE_720P		(0x05)
+#define STD_MODE_720P_25	(0x08)
+#define STD_MODE_720P_30	(0x07)
+#define STD_MODE_720P_50	(0x06)
+#define STD_MODE_1080I		(0x0D)
+#define STD_MODE_1080I_25fps	(0x0E)
+#define STD_MODE_1080P_24	(0x12)
+#define STD_MODE_1080P_25	(0x10)
+#define STD_MODE_1080P_30	(0x0F)
+#define STD_MODE_525P		(0x00)
+#define STD_MODE_625P		(0x03)
+
+/* Bit masks for SD Mode Register 1 */
+#define SD_STD_MASK		(0x03)
+#define SD_STD_NTSC		(0x00)
+#define SD_STD_PAL_BDGHI	(0x01)
+#define SD_STD_PAL_M		(0x02)
+#define SD_STD_PAL_N		(0x03)
+#define SD_LUMA_FLTR_MASK	(0x7)
+#define SD_LUMA_FLTR_SHIFT	(0x2)
+#define SD_CHROMA_FLTR_MASK	(0x7)
+#define SD_CHROMA_FLTR_SHIFT	(0x5)
+
+/* Bit masks for SD Mode Register 2 */
+#define SD_PBPR_SSAF_EN		(0x01)
+#define SD_PBPR_SSAF_DI		(0xFE)
+#define SD_DAC_1_DI		(0xFD)
+#define SD_DAC_2_DI		(0xFB)
+#define SD_PEDESTAL_EN		(0x08)
+#define SD_PEDESTAL_DI		(0xF7)
+#define SD_SQUARE_PIXEL_EN	(0x10)
+#define SD_SQUARE_PIXEL_DI	(0xEF)
+#define SD_PIXEL_DATA_VALID	(0x40)
+#define SD_ACTIVE_EDGE_EN	(0x80)
+#define SD_ACTIVE_EDGE_DI	(0x7F)
+
+/* Bit masks for HD Mode Register 6 */
+#define HD_RGB_INPUT_EN		(0x02)
+#define HD_RGB_INPUT_DI		(0xFD)
+#define HD_PBPR_SYNC_EN		(0x04)
+#define HD_PBPR_SYNC_DI		(0xFB)
+#define HD_DAC_SWAP_EN		(0x08)
+#define HD_DAC_SWAP_DI		(0xF7)
+#define HD_GAMMA_CURVE_A	(0xEF)
+#define HD_GAMMA_CURVE_B	(0x10)
+#define HD_GAMMA_EN		(0x20)
+#define HD_GAMMA_DI		(0xDF)
+#define HD_ADPT_FLTR_MODEB	(0x40)
+#define HD_ADPT_FLTR_MODEA	(0xBF)
+#define HD_ADPT_FLTR_EN		(0x80)
+#define HD_ADPT_FLTR_DI		(0x7F)
+
+#define ADV7343_BRIGHTNESS_MAX	(127)
+#define ADV7343_BRIGHTNESS_MIN	(0)
+#define ADV7343_BRIGHTNESS_DEF	(3)
+#define ADV7343_HUE_MAX		(255)
+#define ADV7343_HUE_MIN		(0)
+#define ADV7343_HUE_DEF		(127)
+#define ADV7343_GAIN_MAX	(255)
+#define ADV7343_GAIN_MIN	(0)
+#define ADV7343_GAIN_DEF	(0)
+
+#endif
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 053bbe8c8e3..830c4a933f6 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -136,9 +136,9 @@ int au0828_tuner_callback(void *priv, int component, int command, int arg)
 			/* Tuner Reset Command from xc5000 */
 			/* Drive the tuner into reset and out */
 			au0828_clear(dev, REG_001, 2);
-			mdelay(200);
+			mdelay(10);
 			au0828_set(dev, REG_001, 2);
-			mdelay(50);
+			mdelay(10);
 			return 0;
 		} else {
 			printk(KERN_ERR
diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c
index a1e4c0d769a..3544a2f12f1 100644
--- a/drivers/media/video/au0828/au0828-core.c
+++ b/drivers/media/video/au0828/au0828-core.c
@@ -36,6 +36,11 @@ int au0828_debug;
 module_param_named(debug, au0828_debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");
 
+static unsigned int disable_usb_speed_check;
+module_param(disable_usb_speed_check, int, 0444);
+MODULE_PARM_DESC(disable_usb_speed_check,
+		 "override min bandwidth requirement of 480M bps");
+
 #define _AU0828_BULKPIPE 0x03
 #define _BULKPIPESIZE 0xffff
 
@@ -181,6 +186,18 @@ static int au0828_usb_probe(struct usb_interface *interface,
 		le16_to_cpu(usbdev->descriptor.idProduct),
 		ifnum);
 
+	/*
+	 * Make sure we have 480 Mbps of bandwidth, otherwise things like
+	 * video stream wouldn't likely work, since 12 Mbps is generally
+	 * not enough even for most Digital TV streams.
+	 */
+	if (usbdev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
+		printk(KERN_ERR "au0828: Device initialization failed.\n");
+		printk(KERN_ERR "au0828: Device must be connected to a "
+		       "high-speed USB 2.0 port.\n");
+		return -ENODEV;
+	}
+
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
 		printk(KERN_ERR "%s() Unable to allocate memory\n", __func__);
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 27bedc6c779..51527d7b55a 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -829,6 +829,9 @@ static int au0828_v4l2_close(struct file *filp)
 
 		au0828_uninit_isoc(dev);
 
+		/* Save some power by putting tuner to sleep */
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
+
 		/* When close the device, set the usb intf0 into alt0 to free
 		   USB bandwidth */
 		ret = usb_set_interface(dev->usbdev, 0, 0);
@@ -910,11 +913,6 @@ static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
 
 	rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
 
-	dprintk(2, "vma start=0x%08lx, size=%ld, ret=%d\n",
-		(unsigned long)vma->vm_start,
-		(unsigned long)vma->vm_end-(unsigned long)vma->vm_start,
-		rc);
-
 	return rc;
 }
 
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 23b7499b318..5eb1464af67 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3152,6 +3152,7 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait)
 	struct bttv_fh *fh = file->private_data;
 	struct bttv_buffer *buf;
 	enum v4l2_field field;
+	unsigned int rc = POLLERR;
 
 	if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) {
 		if (!check_alloc_btres(fh->btv,fh,RESOURCE_VBI))
@@ -3160,9 +3161,10 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait)
 	}
 
 	if (check_btres(fh,RESOURCE_VIDEO_STREAM)) {
+		mutex_lock(&fh->cap.vb_lock);
 		/* streaming capture */
 		if (list_empty(&fh->cap.stream))
-			return POLLERR;
+			goto err;
 		buf = list_entry(fh->cap.stream.next,struct bttv_buffer,vb.stream);
 	} else {
 		/* read() capture */
@@ -3191,11 +3193,12 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait)
 	poll_wait(file, &buf->vb.done, wait);
 	if (buf->vb.state == VIDEOBUF_DONE ||
 	    buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN|POLLRDNORM;
-	return 0;
+		rc =  POLLIN|POLLRDNORM;
+	else
+		rc = 0;
 err:
 	mutex_unlock(&fh->cap.vb_lock);
-	return POLLERR;
+	return rc;
 }
 
 static int bttv_open(struct file *file)
@@ -4166,7 +4169,6 @@ static struct video_device *vdev_init(struct bttv *btv,
 	if (NULL == vfd)
 		return NULL;
 	*vfd = *template;
-	vfd->minor   = -1;
 	vfd->v4l2_dev = &btv->c.v4l2_dev;
 	vfd->release = video_device_release;
 	vfd->debug   = bttv_debug;
@@ -4629,7 +4631,7 @@ static int __init bttv_init_module(void)
 #endif
 	if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME)
 		gbuffers = 2;
-	if (gbufsize < 0 || gbufsize > BTTV_MAX_FBUF)
+	if (gbufsize > BTTV_MAX_FBUF)
 		gbufsize = BTTV_MAX_FBUF;
 	gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK;
 	if (bttv_verbose)
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index a99d92fac3d..ebd1ee9dc87 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -389,6 +389,27 @@ int __devinit init_bttv_i2c(struct bttv *btv)
 	}
 	if (0 == btv->i2c_rc && i2c_scan)
 		do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client);
+
+	/* Instantiate the IR receiver device, if present */
+	if (0 == btv->i2c_rc) {
+		struct i2c_board_info info;
+		/* The external IR receiver is at i2c address 0x34 (0x35 for
+		   reads).  Future Hauppauge cards will have an internal
+		   receiver at 0x30 (0x31 for reads).  In theory, both can be
+		   fitted, and Hauppauge suggest an external overrides an
+		   internal.
+
+		   That's why we probe 0x1a (~0x34) first. CB
+		*/
+		const unsigned short addr_list[] = {
+			0x1a, 0x18, 0x4b, 0x64, 0x30,
+			I2C_CLIENT_END
+		};
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+		i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
+	}
 	return btv->i2c_rc;
 }
 
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index d4099f5312a..0b4a8f309cf 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -1064,7 +1064,7 @@ static int ioctl_querymenu(void *arg,struct camera_data *cam)
 
 	switch(m->id) {
 	case CPIA2_CID_FLICKER_MODE:
-		if(m->index < 0 || m->index >= NUM_FLICKER_CONTROLS)
+		if (m->index >= NUM_FLICKER_CONTROLS)
 			return -EINVAL;
 
 		strcpy(m->name, flicker_controls[m->index].name);
@@ -1082,14 +1082,14 @@ static int ioctl_querymenu(void *arg,struct camera_data *cam)
 					maximum = i;
 			}
 		}
-		if(m->index < 0 || m->index > maximum)
+		if (m->index > maximum)
 			return -EINVAL;
 
 		strcpy(m->name, framerate_controls[m->index].name);
 		break;
 	    }
 	case CPIA2_CID_LIGHTS:
-		if(m->index < 0 || m->index >= NUM_LIGHTS_CONTROLS)
+		if (m->index >= NUM_LIGHTS_CONTROLS)
 			return -EINVAL;
 
 		strcpy(m->name, lights_controls[m->index].name);
diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c
index 7a8ad5963de..35268923911 100644
--- a/drivers/media/video/cx18/cx18-audio.c
+++ b/drivers/media/video/cx18/cx18-audio.c
@@ -26,14 +26,18 @@
 #include "cx18-cards.h"
 #include "cx18-audio.h"
 
-#define CX18_AUDIO_ENABLE 0xc72014
+#define CX18_AUDIO_ENABLE    0xc72014
+#define CX18_AI1_MUX_MASK    0x30
+#define CX18_AI1_MUX_I2S1    0x00
+#define CX18_AI1_MUX_I2S2    0x10
+#define CX18_AI1_MUX_843_I2S 0x20
 
 /* Selects the audio input and output according to the current
    settings. */
 int cx18_audio_set_io(struct cx18 *cx)
 {
 	const struct cx18_card_audio_input *in;
-	u32 val;
+	u32 u, v;
 	int err;
 
 	/* Determine which input to use */
@@ -52,9 +56,37 @@ int cx18_audio_set_io(struct cx18 *cx)
 		return err;
 
 	/* FIXME - this internal mux should be abstracted to a subdev */
-	val = cx18_read_reg(cx, CX18_AUDIO_ENABLE) & ~0x30;
-	val |= (in->audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 :
-					(in->audio_input << 4);
-	cx18_write_reg_expect(cx, val | 0xb00, CX18_AUDIO_ENABLE, val, 0x30);
+	u = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
+	v = u & ~CX18_AI1_MUX_MASK;
+	switch (in->audio_input) {
+	case CX18_AV_AUDIO_SERIAL1:
+		v |= CX18_AI1_MUX_I2S1;
+		break;
+	case CX18_AV_AUDIO_SERIAL2:
+		v |= CX18_AI1_MUX_I2S2;
+		break;
+	default:
+		v |= CX18_AI1_MUX_843_I2S;
+		break;
+	}
+	if (v == u) {
+		/* force a toggle of some AI1 MUX control bits */
+		u &= ~CX18_AI1_MUX_MASK;
+		switch (in->audio_input) {
+		case CX18_AV_AUDIO_SERIAL1:
+			u |= CX18_AI1_MUX_843_I2S;
+			break;
+		case CX18_AV_AUDIO_SERIAL2:
+			u |= CX18_AI1_MUX_843_I2S;
+			break;
+		default:
+			u |= CX18_AI1_MUX_I2S1;
+			break;
+		}
+		cx18_write_reg_expect(cx, u | 0xb00, CX18_AUDIO_ENABLE,
+				      u, CX18_AI1_MUX_MASK);
+	}
+	cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+			      v, CX18_AI1_MUX_MASK);
 	return 0;
 }
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index cf2bd888a42..536dedb23ba 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -99,9 +99,39 @@ int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask,
 			     or_value);
 }
 
-static void cx18_av_initialize(struct cx18 *cx)
+static int cx18_av_init(struct v4l2_subdev *sd, u32 val)
 {
-	struct cx18_av_state *state = &cx->av_state;
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+	/*
+	 * The crystal freq used in calculations in this driver will be
+	 * 28.636360 MHz.
+	 * Aim to run the PLLs' VCOs near 400 MHz to minimze errors.
+	 */
+
+	/*
+	 * VDCLK  Integer = 0x0f, Post Divider = 0x04
+	 * AIMCLK Integer = 0x0e, Post Divider = 0x16
+	 */
+	cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
+
+	/* VDCLK Fraction = 0x2be2fe */
+	/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
+	cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
+
+	/* AIMCLK Fraction = 0x05227ad */
+	/* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/
+	cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
+
+	/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
+	cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
+	return 0;
+}
+
+static void cx18_av_initialize(struct v4l2_subdev *sd)
+{
+	struct cx18_av_state *state = to_cx18_av_state(sd);
+	struct cx18 *cx = v4l2_get_subdevdata(sd);
 	u32 v;
 
 	cx18_av_loadfw(cx);
@@ -150,6 +180,26 @@ static void cx18_av_initialize(struct cx18 *cx)
 	cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0x8000);
 	cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0);
 
+	/*
+	 * Disable Video Auto-config of the Analog Front End and Video PLL.
+	 *
+	 * Since we only use BT.656 pixel mode, which works for both 525 and 625
+	 * line systems, it's just easier for us to set registers
+	 * 0x102 (CXADEC_CHIP_CTRL), 0x104-0x106 (CXADEC_AFE_CTRL),
+	 * 0x108-0x109 (CXADEC_PLL_CTRL1), and 0x10c-0x10f (CXADEC_VID_PLL_FRAC)
+	 * ourselves, than to run around cleaning up after the auto-config.
+	 *
+	 * (Note: my CX23418 chip doesn't seem to let the ACFG_DIS bit
+	 * get set to 1, but OTOH, it doesn't seem to do AFE and VID PLL
+	 * autoconfig either.)
+	 *
+	 * As a default, also turn off Dual mode for ADC2 and set ADC2 to CH3.
+	 */
+	cx18_av_and_or4(cx, CXADEC_CHIP_CTRL, 0xFFFBFFFF, 0x00120000);
+
+	/* Setup the Video and and Aux/Audio PLLs */
+	cx18_av_init(sd, 0);
+
 	/* set video to auto-detect */
 	/* Clear bits 11-12 to enable slow locking mode.  Set autodetect mode */
 	/* set the comb notch = 1 */
@@ -176,12 +226,23 @@ static void cx18_av_initialize(struct cx18 *cx)
 	/* EncSetSignalStd(dwDevNum, pEnc->dwSigStd); */
 	/* EncSetVideoInput(dwDevNum, pEnc->VidIndSelection); */
 
-	v = cx18_av_read4(cx, CXADEC_AFE_CTRL);
-	v &= 0xFFFBFFFF;            /* turn OFF bit 18 for droop_comp_ch1 */
-	v &= 0xFFFF7FFF;            /* turn OFF bit 9 for clamp_sel_ch1 */
-	v &= 0xFFFFFFFE;            /* turn OFF bit 0 for 12db_ch1 */
-	/* v |= 0x00000001;*/            /* turn ON bit 0 for 12db_ch1 */
-	cx18_av_write4(cx, CXADEC_AFE_CTRL, v);
+	/*
+	 * Analog Front End (AFE)
+	 * Default to luma on ch1/ADC1, chroma on ch2/ADC2, SIF on ch3/ADC2
+	 *  bypass_ch[1-3]     use filter
+	 *  droop_comp_ch[1-3] disable
+	 *  clamp_en_ch[1-3]   disable
+	 *  aud_in_sel         ADC2
+	 *  luma_in_sel        ADC1
+	 *  chroma_in_sel      ADC2
+	 *  clamp_sel_ch[2-3]  midcode
+	 *  clamp_sel_ch1      video decoder
+	 *  vga_sel_ch3        audio decoder
+	 *  vga_sel_ch[1-2]    video decoder
+	 *  half_bw_ch[1-3]    disable
+	 *  +12db_ch[1-3]      disable
+	 */
+	cx18_av_and_or4(cx, CXADEC_AFE_CTRL, 0xFF000000, 0x00005D00);
 
 /* 	if(dwEnable && dw3DCombAvailable) { */
 /*      	CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */
@@ -195,50 +256,18 @@ static void cx18_av_initialize(struct cx18 *cx)
 
 static int cx18_av_reset(struct v4l2_subdev *sd, u32 val)
 {
-	struct cx18 *cx = v4l2_get_subdevdata(sd);
-
-	cx18_av_initialize(cx);
-	return 0;
-}
-
-static int cx18_av_init(struct v4l2_subdev *sd, u32 val)
-{
-	struct cx18 *cx = v4l2_get_subdevdata(sd);
-
-	/*
-	 * The crystal freq used in calculations in this driver will be
-	 * 28.636360 MHz.
-	 * Aim to run the PLLs' VCOs near 400 MHz to minimze errors.
-	 */
-
-	/*
-	 * VDCLK  Integer = 0x0f, Post Divider = 0x04
-	 * AIMCLK Integer = 0x0e, Post Divider = 0x16
-	 */
-	cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
-
-	/* VDCLK Fraction = 0x2be2fe */
-	/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
-	cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
-
-	/* AIMCLK Fraction = 0x05227ad */
-	/* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/
-	cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
-
-	/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
-	cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
+	cx18_av_initialize(sd);
 	return 0;
 }
 
 static int cx18_av_load_fw(struct v4l2_subdev *sd)
 {
 	struct cx18_av_state *state = to_cx18_av_state(sd);
-	struct cx18 *cx = v4l2_get_subdevdata(sd);
 
 	if (!state->is_initialized) {
 		/* initialize on first use */
 		state->is_initialized = 1;
-		cx18_av_initialize(cx);
+		cx18_av_initialize(sd);
 	}
 	return 0;
 }
@@ -248,8 +277,15 @@ void cx18_av_std_setup(struct cx18 *cx)
 	struct cx18_av_state *state = &cx->av_state;
 	struct v4l2_subdev *sd = &state->sd;
 	v4l2_std_id std = state->std;
+
+	/*
+	 * Video ADC crystal clock to pixel clock SRC decimation ratio
+	 * 28.636360 MHz/13.5 Mpps * 256 = 0x21f.07b
+	 */
+	const int src_decimation = 0x21f;
+
 	int hblank, hactive, burst, vblank, vactive, sc;
-	int vblank656, src_decimation;
+	int vblank656;
 	int luma_lpf, uv_lpf, comb;
 	u32 pll_int, pll_frac, pll_post;
 
@@ -259,40 +295,96 @@ void cx18_av_std_setup(struct cx18 *cx)
 	else
 		cx18_av_write(cx, 0x49f, 0x14);
 
+	/*
+	 * Note: At the end of a field, there are 3 sets of half line duration
+	 * (double horizontal rate) pulses:
+	 *
+	 * 5 (625) or 6 (525) half-lines to blank for the vertical retrace
+	 * 5 (625) or 6 (525) vertical sync pulses of half line duration
+	 * 5 (625) or 6 (525) half-lines of equalization pulses
+	 */
 	if (std & V4L2_STD_625_50) {
-		/* FIXME - revisit these for Sliced VBI */
+		/*
+		 * The following relationships of half line counts should hold:
+		 * 625 = vblank656 + vactive
+		 * 10 = vblank656 - vblank = vsync pulses + equalization pulses
+		 *
+		 * vblank656: half lines after line 625/mid-313 of blanked video
+		 * vblank:    half lines, after line 5/317, of blanked video
+		 * vactive:   half lines of active video +
+		 * 		5 half lines after the end of active video
+		 *
+		 * As far as I can tell:
+		 * vblank656 starts counting from the falling edge of the first
+		 * 	vsync pulse (start of line 1 or mid-313)
+		 * vblank starts counting from the after the 5 vsync pulses and
+		 * 	5 or 4 equalization pulses (start of line 6 or 318)
+		 *
+		 * For 625 line systems the driver will extract VBI information
+		 * from lines 6-23 and lines 318-335 (but the slicer can only
+		 * handle 17 lines, not the 18 in the vblank region).
+		 * In addition, we need vblank656 and vblank to be one whole
+		 * line longer, to cover line 24 and 336, so the SAV/EAV RP
+		 * codes get generated such that the encoder can actually
+		 * extract line 23 & 335 (WSS).  We'll lose 1 line in each field
+		 * at the top of the screen.
+		 *
+		 * It appears the 5 half lines that happen after active
+		 * video must be included in vactive (579 instead of 574),
+		 * otherwise the colors get badly displayed in various regions
+		 * of the screen.  I guess the chroma comb filter gets confused
+		 * without them (at least when a PVR-350 is the PAL source).
+		 */
+		vblank656 = 48; /* lines  1 -  24  &  313 - 336 */
+		vblank = 38;    /* lines  6 -  24  &  318 - 336 */
+		vactive = 579;  /* lines 24 - 313  &  337 - 626 */
+
+		/*
+		 * For a 13.5 Mpps clock and 15,625 Hz line rate, a line is
+		 * is 864 pixels = 720 active + 144 blanking.  ITU-R BT.601
+		 * specifies 12 luma clock periods or ~ 0.9 * 13.5 Mpps after
+		 * the end of active video to start a horizontal line, so that
+		 * leaves 132 pixels of hblank to ignore.
+		 */
 		hblank = 132;
 		hactive = 720;
-		burst = 93;
-		vblank = 36;
-		vactive = 580;
-		vblank656 = 40;
-		src_decimation = 0x21f;
 
+		/*
+		 * Burst gate delay (for 625 line systems)
+		 * Hsync leading edge to color burst rise = 5.6 us
+		 * Color burst width = 2.25 us
+		 * Gate width = 4 pixel clocks
+		 * (5.6 us + 2.25/2 us) * 13.5 Mpps + 4/2 clocks = 92.79 clocks
+		 */
+		burst = 93;
 		luma_lpf = 2;
 		if (std & V4L2_STD_PAL) {
 			uv_lpf = 1;
 			comb = 0x20;
-			sc = 688739;
+			/* sc = 4433618.75 * src_decimation/28636360 * 2^13 */
+			sc = 688700;
 		} else if (std == V4L2_STD_PAL_Nc) {
 			uv_lpf = 1;
 			comb = 0x20;
-			sc = 556453;
+			/* sc = 3582056.25 * src_decimation/28636360 * 2^13 */
+			sc = 556422;
 		} else { /* SECAM */
 			uv_lpf = 0;
 			comb = 0;
-			sc = 672351;
+			/* (fr + fb)/2 = (4406260 + 4250000)/2 = 4328130 */
+			/* sc = 4328130 * src_decimation/28636360 * 2^13 */
+			sc = 672314;
 		}
 	} else {
 		/*
 		 * The following relationships of half line counts should hold:
-		 * 525 = vsync + vactive + vblank656
-		 * 12 = vblank656 - vblank
+		 * 525 = prevsync + vblank656 + vactive
+		 * 12 = vblank656 - vblank = vsync pulses + equalization pulses
 		 *
-		 * vsync:     always 6 half-lines of vsync pulses
-		 * vactive:   half lines of active video
+		 * prevsync:  6 half-lines before the vsync pulses
 		 * vblank656: half lines, after line 3/mid-266, of blanked video
 		 * vblank:    half lines, after line 9/272, of blanked video
+		 * vactive:   half lines of active video
 		 *
 		 * As far as I can tell:
 		 * vblank656 starts counting from the falling edge of the first
@@ -319,20 +411,30 @@ void cx18_av_std_setup(struct cx18 *cx)
 		luma_lpf = 1;
 		uv_lpf = 1;
 
-		src_decimation = 0x21f;
+		/*
+		 * Burst gate delay (for 525 line systems)
+		 * Hsync leading edge to color burst rise = 5.3 us
+		 * Color burst width = 2.5 us
+		 * Gate width = 4 pixel clocks
+		 * (5.3 us + 2.5/2 us) * 13.5 Mpps + 4/2 clocks = 90.425 clocks
+		 */
 		if (std == V4L2_STD_PAL_60) {
-			burst = 0x5b;
+			burst = 90;
 			luma_lpf = 2;
 			comb = 0x20;
-			sc = 688739;
+			/* sc = 4433618.75 * src_decimation/28636360 * 2^13 */
+			sc = 688700;
 		} else if (std == V4L2_STD_PAL_M) {
-			burst = 0x61;
+			/* The 97 needs to be verified against PAL-M timings */
+			burst = 97;
 			comb = 0x20;
-			sc = 555452;
+			/* sc = 3575611.49 * src_decimation/28636360 * 2^13 */
+			sc = 555421;
 		} else {
-			burst = 0x5b;
+			burst = 90;
 			comb = 0x66;
-			sc = 556063;
+			/* sc = 3579545.45.. * src_decimation/28636360 * 2^13 */
+			sc = 556032;
 		}
 	}
 
@@ -344,23 +446,26 @@ void cx18_av_std_setup(struct cx18 *cx)
 			    pll_int, pll_frac, pll_post);
 
 	if (pll_post) {
-		int fin, fsc, pll;
+		int fsc, pll;
+		u64 tmp;
 
 		pll = (28636360L * ((((u64)pll_int) << 25) + pll_frac)) >> 25;
 		pll /= pll_post;
-		CX18_DEBUG_INFO_DEV(sd, "PLL = %d.%06d MHz\n",
+		CX18_DEBUG_INFO_DEV(sd, "Video PLL = %d.%06d MHz\n",
 				    pll / 1000000, pll % 1000000);
-		CX18_DEBUG_INFO_DEV(sd, "PLL/8 = %d.%06d MHz\n",
+		CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n",
 				    pll / 8000000, (pll / 8) % 1000000);
 
-		fin = ((u64)src_decimation * pll) >> 12;
-		CX18_DEBUG_INFO_DEV(sd, "ADC Sampling freq = %d.%06d MHz\n",
-				    fin / 1000000, fin % 1000000);
+		CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio "
+				    "= %d.%03d\n", src_decimation / 256,
+				    ((src_decimation % 256) * 1000) / 256);
 
-		fsc = (((u64)sc) * pll) >> 24L;
+		tmp = 28636360 * (u64) sc;
+		do_div(tmp, src_decimation);
+		fsc = tmp >> 13;
 		CX18_DEBUG_INFO_DEV(sd,
-				    "Chroma sub-carrier freq = %d.%06d MHz\n",
-				    fsc / 1000000, fsc % 1000000);
+				    "Chroma sub-carrier initial freq = %d.%06d "
+				    "MHz\n", fsc / 1000000, fsc % 1000000);
 
 		CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, "
 				    "vactive %i, vblank656 %i, src_dec %i, "
@@ -470,16 +575,23 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
 {
 	struct cx18_av_state *state = &cx->av_state;
 	struct v4l2_subdev *sd = &state->sd;
-	u8 is_composite = (vid_input >= CX18_AV_COMPOSITE1 &&
-			   vid_input <= CX18_AV_COMPOSITE8);
-	u8 reg;
-	u8 v;
+
+	enum analog_signal_type {
+		NONE, CVBS, Y, C, SIF, Pb, Pr
+	} ch[3] = {NONE, NONE, NONE};
+
+	u8 afe_mux_cfg;
+	u8 adc2_cfg;
+	u32 afe_cfg;
+	int i;
 
 	CX18_DEBUG_INFO_DEV(sd, "decoder set video input %d, audio input %d\n",
 			    vid_input, aud_input);
 
-	if (is_composite) {
-		reg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1);
+	if (vid_input >= CX18_AV_COMPOSITE1 &&
+	    vid_input <= CX18_AV_COMPOSITE8) {
+		afe_mux_cfg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1);
+		ch[0] = CVBS;
 	} else {
 		int luma = vid_input & 0xf0;
 		int chroma = vid_input & 0xf00;
@@ -493,26 +605,45 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
 				     vid_input);
 			return -EINVAL;
 		}
-		reg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4);
+		afe_mux_cfg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4);
+		ch[0] = Y;
 		if (chroma >= CX18_AV_SVIDEO_CHROMA7) {
-			reg &= 0x3f;
-			reg |= (chroma - CX18_AV_SVIDEO_CHROMA7) >> 2;
+			afe_mux_cfg &= 0x3f;
+			afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA7) >> 2;
+			ch[2] = C;
 		} else {
-			reg &= 0xcf;
-			reg |= (chroma - CX18_AV_SVIDEO_CHROMA4) >> 4;
+			afe_mux_cfg &= 0xcf;
+			afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA4) >> 4;
+			ch[1] = C;
 		}
 	}
+	/* TODO: LeadTek WinFast DVR3100 H & WinFast PVR2100 can do Y/Pb/Pr */
 
 	switch (aud_input) {
 	case CX18_AV_AUDIO_SERIAL1:
 	case CX18_AV_AUDIO_SERIAL2:
 		/* do nothing, use serial audio input */
 		break;
-	case CX18_AV_AUDIO4: reg &= ~0x30; break;
-	case CX18_AV_AUDIO5: reg &= ~0x30; reg |= 0x10; break;
-	case CX18_AV_AUDIO6: reg &= ~0x30; reg |= 0x20; break;
-	case CX18_AV_AUDIO7: reg &= ~0xc0; break;
-	case CX18_AV_AUDIO8: reg &= ~0xc0; reg |= 0x40; break;
+	case CX18_AV_AUDIO4:
+		afe_mux_cfg &= ~0x30;
+		ch[1] = SIF;
+		break;
+	case CX18_AV_AUDIO5:
+		afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x10;
+		ch[1] = SIF;
+		break;
+	case CX18_AV_AUDIO6:
+		afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x20;
+		ch[1] = SIF;
+		break;
+	case CX18_AV_AUDIO7:
+		afe_mux_cfg &= ~0xc0;
+		ch[2] = SIF;
+		break;
+	case CX18_AV_AUDIO8:
+		afe_mux_cfg = (afe_mux_cfg & ~0xc0) | 0x40;
+		ch[2] = SIF;
+		break;
 
 	default:
 		CX18_ERR_DEV(sd, "0x%04x is not a valid audio input!\n",
@@ -520,24 +651,65 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
 		return -EINVAL;
 	}
 
-	cx18_av_write_expect(cx, 0x103, reg, reg, 0xf7);
+	/* Set up analog front end multiplexers */
+	cx18_av_write_expect(cx, 0x103, afe_mux_cfg, afe_mux_cfg, 0xf7);
 	/* Set INPUT_MODE to Composite (0) or S-Video (1) */
-	cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02);
+	cx18_av_and_or(cx, 0x401, ~0x6, ch[0] == CVBS ? 0 : 0x02);
 
 	/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
-	v = cx18_av_read(cx, 0x102);
-	if (reg & 0x80)
-		v &= ~0x2;
+	adc2_cfg = cx18_av_read(cx, 0x102);
+	if (ch[2] == NONE)
+		adc2_cfg &= ~0x2; /* No sig on CH3, set ADC2 to CH2 for input */
 	else
-		v |= 0x2;
+		adc2_cfg |= 0x2;  /* Signal on CH3, set ADC2 to CH3 for input */
+
 	/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
-	if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30)
-		v |= 0x4;
+	if (ch[1] != NONE && ch[2] != NONE)
+		adc2_cfg |= 0x4; /* Set dual mode */
 	else
-		v &= ~0x4;
-	cx18_av_write_expect(cx, 0x102, v, v, 0x17);
+		adc2_cfg &= ~0x4; /* Clear dual mode */
+	cx18_av_write_expect(cx, 0x102, adc2_cfg, adc2_cfg, 0x17);
+
+	/* Configure the analog front end */
+	afe_cfg = cx18_av_read4(cx, CXADEC_AFE_CTRL);
+	afe_cfg &= 0xff000000;
+	afe_cfg |= 0x00005000; /* CHROMA_IN, AUD_IN: ADC2; LUMA_IN: ADC1 */
+	if (ch[1] != NONE && ch[2] != NONE)
+		afe_cfg |= 0x00000030; /* half_bw_ch[2-3] since in dual mode */
+
+	for (i = 0; i < 3; i++) {
+		switch (ch[i]) {
+		default:
+		case NONE:
+			/* CLAMP_SEL = Fixed to midcode clamp level */
+			afe_cfg |= (0x00000200 << i);
+			break;
+		case CVBS:
+		case Y:
+			if (i > 0)
+				afe_cfg |= 0x00002000; /* LUMA_IN_SEL: ADC2 */
+			break;
+		case C:
+		case Pb:
+		case Pr:
+			/* CLAMP_SEL = Fixed to midcode clamp level */
+			afe_cfg |= (0x00000200 << i);
+			if (i == 0 && ch[i] == C)
+				afe_cfg &= ~0x00001000; /* CHROMA_IN_SEL ADC1 */
+			break;
+		case SIF:
+			/*
+			 * VGA_GAIN_SEL = Audio Decoder
+			 * CLAMP_SEL = Fixed to midcode clamp level
+			 */
+			afe_cfg |= (0x00000240 << i);
+			if (i == 0)
+				afe_cfg &= ~0x00004000; /* AUD_IN_SEL ADC1 */
+			break;
+		}
+	}
 
-	/*cx18_av_and_or4(cx, 0x104, ~0x001b4180, 0x00004180);*/
+	cx18_av_write4(cx, CXADEC_AFE_CTRL, afe_cfg);
 
 	state->vid_input = vid_input;
 	state->aud_input = aud_input;
@@ -858,9 +1030,9 @@ static int cx18_av_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
 		 * cx18_av_std_setup(), above standard values:
 		 *
 		 * 480 + 1 for 60 Hz systems
-		 * 576 + 4 for 50 Hz systems
+		 * 576 + 3 for 50 Hz systems
 		 */
-		Vlines = pix->height + (is_50Hz ? 4 : 1);
+		Vlines = pix->height + (is_50Hz ? 3 : 1);
 
 		/*
 		 * Invalid height and width scaling requests are:
diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c
index 49a55cc8d83..b9e8cc5d264 100644
--- a/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/drivers/media/video/cx18/cx18-av-firmware.c
@@ -24,15 +24,63 @@
 #include "cx18-io.h"
 #include <linux/firmware.h>
 
-#define CX18_AUDIO_ENABLE 0xc72014
+#define CX18_AUDIO_ENABLE    0xc72014
+#define CX18_AI1_MUX_MASK    0x30
+#define CX18_AI1_MUX_I2S1    0x00
+#define CX18_AI1_MUX_I2S2    0x10
+#define CX18_AI1_MUX_843_I2S 0x20
+#define CX18_AI1_MUX_INVALID 0x30
+
 #define FWFILE "v4l-cx23418-dig.fw"
 
+static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw)
+{
+	struct v4l2_subdev *sd = &cx->av_state.sd;
+	int ret = 0;
+	const u8 *data;
+	u32 size;
+	int addr;
+	u32 expected, dl_control;
+
+	/* Ensure we put the 8051 in reset and enable firmware upload mode */
+	dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	do {
+		dl_control &= 0x00ffffff;
+		dl_control |= 0x0f000000;
+		cx18_av_write4_noretry(cx, CXADEC_DL_CTL, dl_control);
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	} while ((dl_control & 0xff000000) != 0x0f000000);
+
+	/* Read and auto increment until at address 0x0000 */
+	while (dl_control & 0x3fff)
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+
+	data = fw->data;
+	size = fw->size;
+	for (addr = 0; addr < size; addr++) {
+		dl_control &= 0xffff3fff; /* ignore top 2 bits of address */
+		expected = 0x0f000000 | ((u32)data[addr] << 16) | addr;
+		if (expected != dl_control) {
+			CX18_ERR_DEV(sd, "verification of %s firmware load "
+				     "failed: expected %#010x got %#010x\n",
+				     FWFILE, expected, dl_control);
+			ret = -EIO;
+			break;
+		}
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	}
+	if (ret == 0)
+		CX18_INFO_DEV(sd, "verified load of %s firmware (%d bytes)\n",
+			      FWFILE, size);
+	return ret;
+}
+
 int cx18_av_loadfw(struct cx18 *cx)
 {
 	struct v4l2_subdev *sd = &cx->av_state.sd;
 	const struct firmware *fw = NULL;
 	u32 size;
-	u32 v;
+	u32 u, v;
 	const u8 *ptr;
 	int i;
 	int retries1 = 0;
@@ -95,6 +143,12 @@ int cx18_av_loadfw(struct cx18 *cx)
 	}
 
 	cx18_av_write4_expect(cx, CXADEC_DL_CTL,
+				0x03000000 | fw->size, 0x03000000, 0x13000000);
+
+	CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size);
+
+	if (cx18_av_verifyfw(cx, fw) == 0)
+		cx18_av_write4_expect(cx, CXADEC_DL_CTL,
 				0x13000000 | fw->size, 0x13000000, 0x13000000);
 
 	/* Output to the 416 */
@@ -135,6 +189,28 @@ int cx18_av_loadfw(struct cx18 *cx)
 		cx18_write_reg_expect(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE,
 				      0, 0x400);
 
+	/* Toggle the AI1 MUX */
+	v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
+	u = v & CX18_AI1_MUX_MASK;
+	v &= ~CX18_AI1_MUX_MASK;
+	if (u == CX18_AI1_MUX_843_I2S || u == CX18_AI1_MUX_INVALID) {
+		/* Switch to I2S1 */
+		v |= CX18_AI1_MUX_I2S1;
+		cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+				      v, CX18_AI1_MUX_MASK);
+		/* Switch back to the A/V decoder core I2S output */
+		v = (v & ~CX18_AI1_MUX_MASK) | CX18_AI1_MUX_843_I2S;
+	} else {
+		/* Switch to the A/V decoder core I2S output */
+		v |= CX18_AI1_MUX_843_I2S;
+		cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+				      v, CX18_AI1_MUX_MASK);
+		/* Switch back to I2S1 or I2S2 */
+		v = (v & ~CX18_AI1_MUX_MASK) | u;
+	}
+	cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+			      v, CX18_AI1_MUX_MASK);
+
 	/* Enable WW auto audio standard detection */
 	v = cx18_av_read4(cx, CXADEC_STD_DET_CTL);
 	v |= 0xFF;   /* Auto by default */
@@ -143,7 +219,5 @@ int cx18_av_loadfw(struct cx18 *cx)
 	cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF);
 
 	release_firmware(fw);
-
-	CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size);
 	return 0;
 }
diff --git a/drivers/media/video/cx18/cx18-av-vbi.c b/drivers/media/video/cx18/cx18-av-vbi.c
index 23b31670bf1..a51732bcca4 100644
--- a/drivers/media/video/cx18/cx18-av-vbi.c
+++ b/drivers/media/video/cx18/cx18-av-vbi.c
@@ -255,8 +255,8 @@ int cx18_av_vbi_s_fmt(struct cx18 *cx, struct v4l2_format *fmt)
 	}
 
 	cx18_av_write(cx, 0x43c, 0x16);
-	/* FIXME - should match vblank set in cx18_av_std_setup() */
-	cx18_av_write(cx, 0x474, is_pal ? 0x2a : 26);
+	/* Should match vblank set in cx18_av_std_setup() */
+	cx18_av_write(cx, 0x474, is_pal ? 38 : 26);
 	return 0;
 }
 
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 9bc22183784..c92a25036f0 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -340,13 +340,12 @@ static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = {
 
 static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = {
 	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, /* PVR2100   */
-	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */
 	{ 0, 0, 0 }
 };
 
 static const struct cx18_card cx18_card_leadtek_pvr2100 = {
 	.type = CX18_CARD_LEADTEK_PVR2100,
-	.name = "Leadtek WinFast PVR2100/DVR3100 H",
+	.name = "Leadtek WinFast PVR2100",
 	.comment = "Experimenters and photos needed for device to work well.\n"
 		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
 	.v4l2_capabilities = CX18_CAP_ENCODER,
@@ -365,15 +364,12 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
 		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
 	},
 	.tuners = {
-		/* XC3028 tuner */
+		/* XC2028 tuner */
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
 	},
 	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
 	.ddr = {
-		/*
-		 * Pointer to proper DDR config values provided by
-		 * Terry Wu <terrywu at leadtek.com.tw>
-		 */
+		/* Pointer to proper DDR config values provided by Terry Wu */
 		.chip_config = 0x303,
 		.refresh = 0x3bb,
 		.timing1 = 0x24220e83,
@@ -392,6 +388,58 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
 
 /* ------------------------------------------------------------------------- */
 
+/* Leadtek WinFast DVR3100 H */
+
+static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_leadtek_dvr3100h = {
+	.type = CX18_CARD_LEADTEK_DVR3100H,
+	.name = "Leadtek WinFast DVR3100 H",
+	.comment = "Simultaneous DVB-T and Analog capture supported,\n"
+		  "\texcept when capturing Analog from the antenna input.\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX |
+		  CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+			CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 	    0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+	},
+	.tuners = {
+		/* XC3028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Pointer to proper DDR config values provided by Terry Wu */
+		.chip_config = 0x303,
+		.refresh = 0x3bb,
+		.timing1 = 0x24220e83,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 0x2,
+	},
+	.gpio_init.initial_value = 0x6,
+	.gpio_init.direction = 0x7,
+	.gpio_audio_input = { .mask   = 0x7,
+			      .tuner  = 0x6, .linein = 0x2, .radio  = 0x2 },
+	.xceive_pin = 1,
+	.pci_list = cx18_pci_leadtek_dvr3100h,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
 static const struct cx18_card *cx18_card_list[] = {
 	&cx18_card_hvr1600_esmt,
 	&cx18_card_hvr1600_samsung,
@@ -400,6 +448,7 @@ static const struct cx18_card *cx18_card_list[] = {
 	&cx18_card_cnxt_raptor_pal,
 	&cx18_card_toshiba_qosmio_dvbt,
 	&cx18_card_leadtek_pvr2100,
+	&cx18_card_leadtek_dvr3100h,
 };
 
 const struct cx18_card *cx18_get_card(u16 index)
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 82fc2f9d402..8e35c3aed54 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -176,8 +176,10 @@ static int cx18_setup_vbi_fmt(struct cx18 *cx,
 		return -EBUSY;
 
 	if (fmt != V4L2_MPEG_STREAM_VBI_FMT_IVTV ||
-	    type != V4L2_MPEG_STREAM_TYPE_MPEG2_PS) {
-		/* We don't do VBI insertion aside from IVTV format in a PS */
+	    !(type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS ||
+	      type == V4L2_MPEG_STREAM_TYPE_MPEG2_DVD ||
+	      type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) {
+		/* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */
 		cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE;
 		CX18_DEBUG_INFO("disabled insertion of sliced VBI data into "
 				"the MPEG stream\n");
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 49b1c3d7b1a..92026e82e10 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -30,6 +30,7 @@
 #include "cx18-irq.h"
 #include "cx18-gpio.h"
 #include "cx18-firmware.h"
+#include "cx18-queue.h"
 #include "cx18-streams.h"
 #include "cx18-av-core.h"
 #include "cx18-scb.h"
@@ -151,7 +152,8 @@ MODULE_PARM_DESC(cardtype,
 		 "\t\t\t 4 = Yuan MPC718\n"
 		 "\t\t\t 5 = Conexant Raptor PAL/SECAM\n"
 		 "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n"
-		 "\t\t\t 7 = Leadtek WinFast PVR2100/DVR3100 H\n"
+		 "\t\t\t 7 = Leadtek WinFast PVR2100\n"
+		 "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
 		 "\t\t\t 0 = Autodetect (default)\n"
 		 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
@@ -312,7 +314,7 @@ static void cx18_process_eeprom(struct cx18 *cx)
 	CX18_INFO("Autodetected %s\n", cx->card_name);
 
 	if (tv.tuner_type == TUNER_ABSENT)
-		CX18_ERR("tveeprom cannot autodetect tuner!");
+		CX18_ERR("tveeprom cannot autodetect tuner!\n");
 
 	if (cx->options.tuner == -1)
 		cx->options.tuner = tv.tuner_type;
@@ -546,6 +548,40 @@ done:
 	cx->card_i2c = cx->card->i2c;
 }
 
+static int __devinit cx18_create_in_workq(struct cx18 *cx)
+{
+	snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in",
+		 cx->v4l2_dev.name);
+	cx->in_work_queue = create_singlethread_workqueue(cx->in_workq_name);
+	if (cx->in_work_queue == NULL) {
+		CX18_ERR("Unable to create incoming mailbox handler thread\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int __devinit cx18_create_out_workq(struct cx18 *cx)
+{
+	snprintf(cx->out_workq_name, sizeof(cx->out_workq_name), "%s-out",
+		 cx->v4l2_dev.name);
+	cx->out_work_queue = create_workqueue(cx->out_workq_name);
+	if (cx->out_work_queue == NULL) {
+		CX18_ERR("Unable to create outgoing mailbox handler threads\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void __devinit cx18_init_in_work_orders(struct cx18 *cx)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++) {
+		cx->in_work_order[i].cx = cx;
+		cx->in_work_order[i].str = cx->epu_debug_str;
+		INIT_WORK(&cx->in_work_order[i].work, cx18_in_work_handler);
+	}
+}
+
 /* Precondition: the cx18 structure has been memset to 0. Only
    the dev and instance fields have been filled in.
    No assumptions on the card type may be made here (see cx18_init_struct2
@@ -553,7 +589,7 @@ done:
  */
 static int __devinit cx18_init_struct1(struct cx18 *cx)
 {
-	int i;
+	int ret;
 
 	cx->base_addr = pci_resource_start(cx->pci_dev, 0);
 
@@ -562,18 +598,18 @@ static int __devinit cx18_init_struct1(struct cx18 *cx)
 	mutex_init(&cx->epu2apu_mb_lock);
 	mutex_init(&cx->epu2cpu_mb_lock);
 
-	cx->work_queue = create_singlethread_workqueue(cx->v4l2_dev.name);
-	if (cx->work_queue == NULL) {
-		CX18_ERR("Unable to create work hander thread\n");
-		return -ENOMEM;
-	}
+	ret = cx18_create_out_workq(cx);
+	if (ret)
+		return ret;
 
-	for (i = 0; i < CX18_MAX_EPU_WORK_ORDERS; i++) {
-		cx->epu_work_order[i].cx = cx;
-		cx->epu_work_order[i].str = cx->epu_debug_str;
-		INIT_WORK(&cx->epu_work_order[i].work, cx18_epu_work_handler);
+	ret = cx18_create_in_workq(cx);
+	if (ret) {
+		destroy_workqueue(cx->out_work_queue);
+		return ret;
 	}
 
+	cx18_init_in_work_orders(cx);
+
 	/* start counting open_id at 1 */
 	cx->open_id = 1;
 
@@ -759,17 +795,17 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
 		retval = -ENODEV;
 		goto err;
 	}
-	if (cx18_init_struct1(cx)) {
-		retval = -ENOMEM;
+
+	retval = cx18_init_struct1(cx);
+	if (retval)
 		goto err;
-	}
 
 	CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
 
 	/* PCI Device Setup */
 	retval = cx18_setup_pci(cx, pci_dev, pci_id);
 	if (retval != 0)
-		goto free_workqueue;
+		goto free_workqueues;
 
 	/* map io memory */
 	CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
@@ -943,8 +979,9 @@ free_map:
 	cx18_iounmap(cx);
 free_mem:
 	release_mem_region(cx->base_addr, CX18_MEM_SIZE);
-free_workqueue:
-	destroy_workqueue(cx->work_queue);
+free_workqueues:
+	destroy_workqueue(cx->in_work_queue);
+	destroy_workqueue(cx->out_work_queue);
 err:
 	if (retval == 0)
 		retval = -ENODEV;
@@ -1053,11 +1090,19 @@ int cx18_init_on_first_open(struct cx18 *cx)
 	return 0;
 }
 
-static void cx18_cancel_epu_work_orders(struct cx18 *cx)
+static void cx18_cancel_in_work_orders(struct cx18 *cx)
 {
 	int i;
-	for (i = 0; i < CX18_MAX_EPU_WORK_ORDERS; i++)
-		cancel_work_sync(&cx->epu_work_order[i].work);
+	for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++)
+		cancel_work_sync(&cx->in_work_order[i].work);
+}
+
+static void cx18_cancel_out_work_orders(struct cx18 *cx)
+{
+	int i;
+	for (i = 0; i < CX18_MAX_STREAMS; i++)
+		if (&cx->streams[i].video_dev != NULL)
+			cancel_work_sync(&cx->streams[i].out_work_order);
 }
 
 static void cx18_remove(struct pci_dev *pci_dev)
@@ -1073,15 +1118,20 @@ static void cx18_remove(struct pci_dev *pci_dev)
 	if (atomic_read(&cx->tot_capturing) > 0)
 		cx18_stop_all_captures(cx);
 
-	/* Interrupts */
+	/* Stop interrupts that cause incoming work to be queued */
 	cx18_sw1_irq_disable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
+
+	/* Incoming work can cause outgoing work, so clean up incoming first */
+	cx18_cancel_in_work_orders(cx);
+	cx18_cancel_out_work_orders(cx);
+
+	/* Stop ack interrupts that may have been needed for work to finish */
 	cx18_sw2_irq_disable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
 
 	cx18_halt_firmware(cx);
 
-	cx18_cancel_epu_work_orders(cx);
-
-	destroy_workqueue(cx->work_queue);
+	destroy_workqueue(cx->in_work_queue);
+	destroy_workqueue(cx->out_work_queue);
 
 	cx18_streams_cleanup(cx, 1);
 
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index ece4f281ef4..c6a1e907f63 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -80,8 +80,9 @@
 #define CX18_CARD_YUAN_MPC718 	      3	/* Yuan MPC718 */
 #define CX18_CARD_CNXT_RAPTOR_PAL     4	/* Conexant Raptor PAL */
 #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
-#define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100/DVR3100 H */
-#define CX18_CARD_LAST 		      6
+#define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
+#define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
+#define CX18_CARD_LAST 		      7
 
 #define CX18_ENC_STREAM_TYPE_MPG  0
 #define CX18_ENC_STREAM_TYPE_TS   1
@@ -254,6 +255,7 @@ struct cx18_options {
 #define CX18_F_S_INTERNAL_USE	5	/* this stream is used internally (sliced VBI processing) */
 #define CX18_F_S_STREAMOFF	7	/* signal end of stream EOS */
 #define CX18_F_S_APPL_IO        8	/* this stream is used read/written by an application */
+#define CX18_F_S_STOPPING	9	/* telling the fw to stop capturing */
 
 /* per-cx18, i_flags */
 #define CX18_F_I_LOADED_FW		0 	/* Loaded firmware 1st time */
@@ -285,6 +287,7 @@ struct cx18_queue {
 	struct list_head list;
 	atomic_t buffers;
 	u32 bytesused;
+	spinlock_t lock;
 };
 
 struct cx18_dvb {
@@ -305,7 +308,7 @@ struct cx18_scb; /* forward reference */
 
 
 #define CX18_MAX_MDL_ACKS 2
-#define CX18_MAX_EPU_WORK_ORDERS (CX18_MAX_FW_MDLS_PER_STREAM + 7)
+#define CX18_MAX_IN_WORK_ORDERS (CX18_MAX_FW_MDLS_PER_STREAM + 7)
 /* CPU_DE_RELEASE_MDL can burst CX18_MAX_FW_MDLS_PER_STREAM orders in a group */
 
 #define CX18_F_EWO_MB_STALE_UPON_RECEIPT 0x1
@@ -313,7 +316,7 @@ struct cx18_scb; /* forward reference */
 #define CX18_F_EWO_MB_STALE \
 	     (CX18_F_EWO_MB_STALE_UPON_RECEIPT | CX18_F_EWO_MB_STALE_WHILE_PROC)
 
-struct cx18_epu_work_order {
+struct cx18_in_work_order {
 	struct work_struct work;
 	atomic_t pending;
 	struct cx18 *cx;
@@ -337,7 +340,6 @@ struct cx18_stream {
 	unsigned mdl_offset;
 
 	u32 id;
-	struct mutex qlock; 	/* locks access to the queues */
 	unsigned long s_flags;	/* status flags, see above */
 	int dma;		/* can be PCI_DMA_TODEVICE,
 				   PCI_DMA_FROMDEVICE or
@@ -353,6 +355,8 @@ struct cx18_stream {
 	struct cx18_queue q_busy;	/* busy buffers - in use by firmware */
 	struct cx18_queue q_full;	/* full buffers - data for user apps */
 
+	struct work_struct out_work_order;
+
 	/* DVB / Digital Transport */
 	struct cx18_dvb dvb;
 };
@@ -568,10 +572,14 @@ struct cx18 {
 	u32 sw2_irq_mask;
 	u32 hw2_irq_mask;
 
-	struct workqueue_struct *work_queue;
-	struct cx18_epu_work_order epu_work_order[CX18_MAX_EPU_WORK_ORDERS];
+	struct workqueue_struct *in_work_queue;
+	char in_workq_name[11]; /* "cx18-NN-in" */
+	struct cx18_in_work_order in_work_order[CX18_MAX_IN_WORK_ORDERS];
 	char epu_debug_str[256]; /* CX18_EPU_DEBUG is rare: use shared space */
 
+	struct workqueue_struct *out_work_queue;
+	char out_workq_name[12]; /* "cx18-NN-out" */
+
 	/* i2c */
 	struct i2c_adapter i2c_adap[2];
 	struct i2c_algo_bit_data i2c_algo[2];
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 3b86f57cd15..6ea3fe623ef 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -23,14 +23,20 @@
 #include "cx18-version.h"
 #include "cx18-dvb.h"
 #include "cx18-io.h"
+#include "cx18-queue.h"
 #include "cx18-streams.h"
 #include "cx18-cards.h"
+#include "cx18-gpio.h"
 #include "s5h1409.h"
 #include "mxl5005s.h"
+#include "zl10353.h"
+#include "tuner-xc2028.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 #define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
+#define CX18_CLOCK_ENABLE2		 0xc71024
+#define CX18_DMUX_CLK_MASK		 0x0080
 
 static struct mxl5005s_config hauppauge_hvr1600_tuner = {
 	.i2c_address     = 0xC6 >> 1,
@@ -57,7 +63,15 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
 	.inversion     = S5H1409_INVERSION_OFF,
 	.status_mode   = S5H1409_DEMODLOCKING,
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
+};
 
+/* Information/confirmation of proper config values provided by Terry Wu */
+static struct zl10353_config leadtek_dvr3100h_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
 };
 
 static int dvb_register(struct cx18_stream *stream);
@@ -98,6 +112,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 		cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
 		break;
 
+	case CX18_CARD_LEADTEK_DVR3100H:
 	default:
 		/* Assumption - Parallel transport - Signalling
 		 * undefined or default.
@@ -267,8 +282,7 @@ void cx18_dvb_unregister(struct cx18_stream *stream)
 }
 
 /* All the DVB attach calls go here, this function get's modified
- * for each new card. No other function in this file needs
- * to change.
+ * for each new card. cx18_dvb_start_feed() will also need changes.
  */
 static int dvb_register(struct cx18_stream *stream)
 {
@@ -289,6 +303,29 @@ static int dvb_register(struct cx18_stream *stream)
 			ret = 0;
 		}
 		break;
+	case CX18_CARD_LEADTEK_DVR3100H:
+		dvb->fe = dvb_attach(zl10353_attach,
+				     &leadtek_dvr3100h_demod,
+				     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
 	default:
 		/* No Digital Tv Support */
 		break;
@@ -299,6 +336,8 @@ static int dvb_register(struct cx18_stream *stream)
 		return -1;
 	}
 
+	dvb->fe->callback = cx18_reset_tuner_gpio;
+
 	ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe);
 	if (ret < 0) {
 		if (dvb->fe->ops.release)
@@ -306,5 +345,16 @@ static int dvb_register(struct cx18_stream *stream)
 		return ret;
 	}
 
+	/*
+	 * The firmware seems to enable the TS DMUX clock
+	 * under various circumstances.  However, since we know we
+	 * might use it, let's just turn it on ourselves here.
+	 */
+	cx18_write_reg_expect(cx,
+			      (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK,
+			      CX18_CLOCK_ENABLE2,
+			      CX18_DMUX_CLK_MASK,
+			      (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK);
+
 	return ret;
 }
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index b3889c0b269..29969c18949 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -265,8 +265,13 @@ static size_t cx18_copy_buf_to_user(struct cx18_stream *s,
 		 * an MPEG-2 Program Pack start code, and provide only
 		 * up to that point to the user, so it's easy to insert VBI data
 		 * the next time around.
+		 *
+		 * This will not work for an MPEG-2 TS and has only been
+		 * verified by analysis to work for an MPEG-2 PS.  Helen Buus
+		 * pointed out this works for the CX23416 MPEG-2 DVD compatible
+		 * stream, and research indicates both the MPEG 2 SVCD and DVD
+		 * stream types use an MPEG-2 PS container.
 		 */
-		/* FIXME - This only works for an MPEG-2 PS, not a TS */
 		/*
 		 * An MPEG-2 Program Stream (PS) is a series of
 		 * MPEG-2 Program Packs terminated by an
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 2226e5791e9..afe46c3d405 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -131,7 +131,7 @@ static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name)
  * Functions that run in a work_queue work handling context
  */
 
-static void epu_dma_done(struct cx18 *cx, struct cx18_epu_work_order *order)
+static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order)
 {
 	u32 handle, mdl_ack_count, id;
 	struct cx18_mailbox *mb;
@@ -191,29 +191,30 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_epu_work_order *order)
 		if (buf == NULL) {
 			CX18_WARN("Could not find buf %d for stream %s\n",
 				  id, s->name);
-			/* Put as many buffers as possible back into fw use */
-			cx18_stream_load_fw_queue(s);
 			continue;
 		}
 
-		if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) {
-			CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n",
-					  buf->bytesused);
-			dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
-					 buf->bytesused);
+		CX18_DEBUG_HI_DMA("%s recv bytesused = %d\n",
+				  s->name, buf->bytesused);
+
+		if (s->type != CX18_ENC_STREAM_TYPE_TS)
+			cx18_enqueue(s, buf, &s->q_full);
+		else {
+			if (s->dvb.enabled)
+				dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
+						 buf->bytesused);
+			cx18_enqueue(s, buf, &s->q_free);
 		}
-		/* Put as many buffers as possible back into fw use */
-		cx18_stream_load_fw_queue(s);
-		/* Put back TS buffer, since it was removed from all queues */
-		if (s->type == CX18_ENC_STREAM_TYPE_TS)
-			cx18_stream_put_buf_fw(s, buf);
 	}
+	/* Put as many buffers as possible back into fw use */
+	cx18_stream_load_fw_queue(s);
+
 	wake_up(&cx->dma_waitq);
 	if (s->id != -1)
 		wake_up(&s->waitq);
 }
 
-static void epu_debug(struct cx18 *cx, struct cx18_epu_work_order *order)
+static void epu_debug(struct cx18 *cx, struct cx18_in_work_order *order)
 {
 	char *p;
 	char *str = order->str;
@@ -224,7 +225,7 @@ static void epu_debug(struct cx18 *cx, struct cx18_epu_work_order *order)
 		CX18_INFO("FW version: %s\n", p - 1);
 }
 
-static void epu_cmd(struct cx18 *cx, struct cx18_epu_work_order *order)
+static void epu_cmd(struct cx18 *cx, struct cx18_in_work_order *order)
 {
 	switch (order->rpu) {
 	case CPU:
@@ -253,18 +254,18 @@ static void epu_cmd(struct cx18 *cx, struct cx18_epu_work_order *order)
 }
 
 static
-void free_epu_work_order(struct cx18 *cx, struct cx18_epu_work_order *order)
+void free_in_work_order(struct cx18 *cx, struct cx18_in_work_order *order)
 {
 	atomic_set(&order->pending, 0);
 }
 
-void cx18_epu_work_handler(struct work_struct *work)
+void cx18_in_work_handler(struct work_struct *work)
 {
-	struct cx18_epu_work_order *order =
-			container_of(work, struct cx18_epu_work_order, work);
+	struct cx18_in_work_order *order =
+			container_of(work, struct cx18_in_work_order, work);
 	struct cx18 *cx = order->cx;
 	epu_cmd(cx, order);
-	free_epu_work_order(cx, order);
+	free_in_work_order(cx, order);
 }
 
 
@@ -272,7 +273,7 @@ void cx18_epu_work_handler(struct work_struct *work)
  * Functions that run in an interrupt handling context
  */
 
-static void mb_ack_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
+static void mb_ack_irq(struct cx18 *cx, struct cx18_in_work_order *order)
 {
 	struct cx18_mailbox __iomem *ack_mb;
 	u32 ack_irq, req;
@@ -308,7 +309,7 @@ static void mb_ack_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
 	return;
 }
 
-static int epu_dma_done_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
+static int epu_dma_done_irq(struct cx18 *cx, struct cx18_in_work_order *order)
 {
 	u32 handle, mdl_ack_offset, mdl_ack_count;
 	struct cx18_mailbox *mb;
@@ -334,7 +335,7 @@ static int epu_dma_done_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
 }
 
 static
-int epu_debug_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
+int epu_debug_irq(struct cx18 *cx, struct cx18_in_work_order *order)
 {
 	u32 str_offset;
 	char *str = order->str;
@@ -355,7 +356,7 @@ int epu_debug_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
 }
 
 static inline
-int epu_cmd_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
+int epu_cmd_irq(struct cx18 *cx, struct cx18_in_work_order *order)
 {
 	int ret = -1;
 
@@ -387,12 +388,12 @@ int epu_cmd_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
 }
 
 static inline
-struct cx18_epu_work_order *alloc_epu_work_order_irq(struct cx18 *cx)
+struct cx18_in_work_order *alloc_in_work_order_irq(struct cx18 *cx)
 {
 	int i;
-	struct cx18_epu_work_order *order = NULL;
+	struct cx18_in_work_order *order = NULL;
 
-	for (i = 0; i < CX18_MAX_EPU_WORK_ORDERS; i++) {
+	for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++) {
 		/*
 		 * We only need "pending" atomic to inspect its contents,
 		 * and need not do a check and set because:
@@ -401,8 +402,8 @@ struct cx18_epu_work_order *alloc_epu_work_order_irq(struct cx18 *cx)
 		 * 2. "pending" is only set here, and we're serialized because
 		 * we're called in an IRQ handler context.
 		 */
-		if (atomic_read(&cx->epu_work_order[i].pending) == 0) {
-			order = &cx->epu_work_order[i];
+		if (atomic_read(&cx->in_work_order[i].pending) == 0) {
+			order = &cx->in_work_order[i];
 			atomic_set(&order->pending, 1);
 			break;
 		}
@@ -414,7 +415,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
 {
 	struct cx18_mailbox __iomem *mb;
 	struct cx18_mailbox *order_mb;
-	struct cx18_epu_work_order *order;
+	struct cx18_in_work_order *order;
 	int submit;
 
 	switch (rpu) {
@@ -428,7 +429,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
 		return;
 	}
 
-	order = alloc_epu_work_order_irq(cx);
+	order = alloc_in_work_order_irq(cx);
 	if (order == NULL) {
 		CX18_WARN("Unable to find blank work order form to schedule "
 			  "incoming mailbox command processing\n");
@@ -461,7 +462,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
 	 */
 	submit = epu_cmd_irq(cx, order);
 	if (submit > 0) {
-		queue_work(cx->work_queue, &order->work);
+		queue_work(cx->in_work_queue, &order->work);
 	}
 }
 
@@ -478,9 +479,10 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 	u32 __iomem *xpu_state;
 	wait_queue_head_t *waitq;
 	struct mutex *mb_lock;
-	long int timeout, ret;
+	unsigned long int t0, timeout, ret;
 	int i;
 	char argstr[MAX_MB_ARGUMENTS*11+1];
+	DEFINE_WAIT(w);
 
 	if (info == NULL) {
 		CX18_WARN("unknown cmd %x\n", cmd);
@@ -562,25 +564,49 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 
 	CX18_DEBUG_HI_IRQ("sending interrupt SW1: %x to send %s\n",
 			  irq, info->name);
+
+	/* So we don't miss the wakeup, prepare to wait before notifying fw */
+	prepare_to_wait(waitq, &w, TASK_UNINTERRUPTIBLE);
 	cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq);
 
-	ret = wait_event_timeout(
-		       *waitq,
-		       cx18_readl(cx, &mb->ack) == cx18_readl(cx, &mb->request),
-		       timeout);
+	t0 = jiffies;
+	ack = cx18_readl(cx, &mb->ack);
+	if (ack != req) {
+		schedule_timeout(timeout);
+		ret = jiffies - t0;
+		ack = cx18_readl(cx, &mb->ack);
+	} else {
+		ret = jiffies - t0;
+	}
 
-	if (ret == 0) {
-		/* Timed out */
+	finish_wait(waitq, &w);
+
+	if (req != ack) {
 		mutex_unlock(mb_lock);
-		CX18_DEBUG_WARN("sending %s timed out waiting %d msecs for RPU "
-				"acknowledgement\n",
-				info->name, jiffies_to_msecs(timeout));
+		if (ret >= timeout) {
+			/* Timed out */
+			CX18_DEBUG_WARN("sending %s timed out waiting %d msecs "
+					"for RPU acknowledgement\n",
+					info->name, jiffies_to_msecs(ret));
+		} else {
+			CX18_DEBUG_WARN("woken up before mailbox ack was ready "
+					"after submitting %s to RPU.  only "
+					"waited %d msecs on req %u but awakened"
+					" with unmatched ack %u\n",
+					info->name,
+					jiffies_to_msecs(ret),
+					req, ack);
+		}
 		return -EINVAL;
 	}
 
-	if (ret != timeout)
+	if (ret >= timeout)
+		CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment "
+				"sending %s; timed out waiting %d msecs\n",
+				info->name, jiffies_to_msecs(ret));
+	else
 		CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n",
-				  jiffies_to_msecs(timeout-ret), info->name);
+				  jiffies_to_msecs(ret), info->name);
 
 	/* Collect data returned by the XPU */
 	for (i = 0; i < MAX_MB_ARGUMENTS; i++)
diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index ce2b6686aa0..e23aaac5b28 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -95,6 +95,6 @@ int cx18_api_func(void *priv, u32 cmd, int in, int out,
 
 void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu);
 
-void cx18_epu_work_handler(struct work_struct *work);
+void cx18_in_work_handler(struct work_struct *work);
 
 #endif
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index 3046b8e7434..fa1ed7897d9 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -23,8 +23,8 @@
  */
 
 #include "cx18-driver.h"
-#include "cx18-streams.h"
 #include "cx18-queue.h"
+#include "cx18-streams.h"
 #include "cx18-scb.h"
 
 void cx18_buf_swap(struct cx18_buffer *buf)
@@ -53,13 +53,13 @@ struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
 		buf->skipped = 0;
 	}
 
-	mutex_lock(&s->qlock);
-
 	/* q_busy is restricted to a max buffer count imposed by firmware */
 	if (q == &s->q_busy &&
 	    atomic_read(&q->buffers) >= CX18_MAX_FW_MDLS_PER_STREAM)
 		q = &s->q_free;
 
+	spin_lock(&q->lock);
+
 	if (to_front)
 		list_add(&buf->list, &q->list); /* LIFO */
 	else
@@ -67,7 +67,7 @@ struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
 	q->bytesused += buf->bytesused - buf->readpos;
 	atomic_inc(&q->buffers);
 
-	mutex_unlock(&s->qlock);
+	spin_unlock(&q->lock);
 	return q;
 }
 
@@ -75,7 +75,7 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
 {
 	struct cx18_buffer *buf = NULL;
 
-	mutex_lock(&s->qlock);
+	spin_lock(&q->lock);
 	if (!list_empty(&q->list)) {
 		buf = list_first_entry(&q->list, struct cx18_buffer, list);
 		list_del_init(&buf->list);
@@ -83,7 +83,7 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
 		buf->skipped = 0;
 		atomic_dec(&q->buffers);
 	}
-	mutex_unlock(&s->qlock);
+	spin_unlock(&q->lock);
 	return buf;
 }
 
@@ -94,9 +94,23 @@ struct cx18_buffer *cx18_queue_get_buf(struct cx18_stream *s, u32 id,
 	struct cx18_buffer *buf;
 	struct cx18_buffer *tmp;
 	struct cx18_buffer *ret = NULL;
-
-	mutex_lock(&s->qlock);
+	LIST_HEAD(sweep_up);
+
+	/*
+	 * We don't have to acquire multiple q locks here, because we are
+	 * serialized by the single threaded work handler.
+	 * Buffers from the firmware will thus remain in order as
+	 * they are moved from q_busy to q_full or to the dvb ring buffer.
+	 */
+	spin_lock(&s->q_busy.lock);
 	list_for_each_entry_safe(buf, tmp, &s->q_busy.list, list) {
+		/*
+		 * We should find what the firmware told us is done,
+		 * right at the front of the queue.  If we don't, we likely have
+		 * missed a buffer done message from the firmware.
+		 * Once we skip a buffer repeatedly, relative to the size of
+		 * q_busy, we have high confidence we've missed it.
+		 */
 		if (buf->id != id) {
 			buf->skipped++;
 			if (buf->skipped >= atomic_read(&s->q_busy.buffers)-1) {
@@ -105,38 +119,41 @@ struct cx18_buffer *cx18_queue_get_buf(struct cx18_stream *s, u32 id,
 					  "times - it must have dropped out of "
 					  "rotation\n", s->name, buf->id,
 					  buf->skipped);
-				/* move it to q_free */
-				list_move_tail(&buf->list, &s->q_free.list);
-				buf->bytesused = buf->readpos = buf->b_flags =
-					buf->skipped = 0;
+				/* Sweep it up to put it back into rotation */
+				list_move_tail(&buf->list, &sweep_up);
 				atomic_dec(&s->q_busy.buffers);
-				atomic_inc(&s->q_free.buffers);
 			}
 			continue;
 		}
-
-		buf->bytesused = bytesused;
-		/* Sync the buffer before we release the qlock */
-		cx18_buf_sync_for_cpu(s, buf);
-		if (s->type == CX18_ENC_STREAM_TYPE_TS) {
-			/*
-			 * TS doesn't use q_full.  As we pull the buffer off of
-			 * the queue here, the caller will have to put it back.
-			 */
-			list_del_init(&buf->list);
-		} else {
-			/* Move buffer from q_busy to q_full */
-			list_move_tail(&buf->list, &s->q_full.list);
-			set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
-			s->q_full.bytesused += buf->bytesused;
-			atomic_inc(&s->q_full.buffers);
-		}
+		/*
+		 * We pull the desired buffer off of the queue here.  Something
+		 * will have to put it back on a queue later.
+		 */
+		list_del_init(&buf->list);
 		atomic_dec(&s->q_busy.buffers);
-
 		ret = buf;
 		break;
 	}
-	mutex_unlock(&s->qlock);
+	spin_unlock(&s->q_busy.lock);
+
+	/*
+	 * We found the buffer for which we were looking.  Get it ready for
+	 * the caller to put on q_full or in the dvb ring buffer.
+	 */
+	if (ret != NULL) {
+		ret->bytesused = bytesused;
+		ret->skipped = 0;
+		/* readpos and b_flags were 0'ed when the buf went on q_busy */
+		cx18_buf_sync_for_cpu(s, ret);
+		if (s->type != CX18_ENC_STREAM_TYPE_TS)
+			set_bit(CX18_F_B_NEED_BUF_SWAP, &ret->b_flags);
+	}
+
+	/* Put any buffers the firmware is ignoring back into normal rotation */
+	list_for_each_entry_safe(buf, tmp, &sweep_up, list) {
+		list_del_init(&buf->list);
+		cx18_enqueue(s, buf, &s->q_free);
+	}
 	return ret;
 }
 
@@ -148,7 +165,7 @@ static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
 	if (q == &s->q_free)
 		return;
 
-	mutex_lock(&s->qlock);
+	spin_lock(&q->lock);
 	while (!list_empty(&q->list)) {
 		buf = list_first_entry(&q->list, struct cx18_buffer, list);
 		list_move_tail(&buf->list, &s->q_free.list);
@@ -156,7 +173,7 @@ static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
 		atomic_inc(&s->q_free.buffers);
 	}
 	cx18_queue_init(q);
-	mutex_unlock(&s->qlock);
+	spin_unlock(&q->lock);
 }
 
 void cx18_flush_queues(struct cx18_stream *s)
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 0932b76b237..54d248e16d8 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -116,12 +116,16 @@ static void cx18_stream_init(struct cx18 *cx, int type)
 	s->buffers = cx->stream_buffers[type];
 	s->buf_size = cx->stream_buf_size[type];
 
-	mutex_init(&s->qlock);
 	init_waitqueue_head(&s->waitq);
 	s->id = -1;
+	spin_lock_init(&s->q_free.lock);
 	cx18_queue_init(&s->q_free);
+	spin_lock_init(&s->q_busy.lock);
 	cx18_queue_init(&s->q_busy);
+	spin_lock_init(&s->q_full.lock);
 	cx18_queue_init(&s->q_full);
+
+	INIT_WORK(&s->out_work_order, cx18_out_work_handler);
 }
 
 static int cx18_prep_dev(struct cx18 *cx, int type)
@@ -367,9 +371,14 @@ static void cx18_vbi_setup(struct cx18_stream *s)
 		 * Tell the encoder to capture 21-4+1=18 lines per field,
 		 * since we want lines 10 through 21.
 		 *
-		 * FIXME - revisit for 625/50 systems
+		 * For 625/50 systems, according to the VIP 2 & BT.656 std:
+		 * The EAV RP code's Field bit toggles on line 1, a few lines
+		 * after the Vertcal Blank bit has already toggled.
+		 * (We've actually set the digitizer so that the Field bit
+		 * toggles on line 2.) Tell the encoder to capture 23-2+1=22
+		 * lines per field, since we want lines 6 through 23.
 		 */
-		lines = cx->is_60hz ? (21 - 4 + 1) * 2 : 38;
+		lines = cx->is_60hz ? (21 - 4 + 1) * 2 : (23 - 2 + 1) * 2;
 	}
 
 	data[0] = s->handle;
@@ -431,14 +440,16 @@ static void cx18_vbi_setup(struct cx18_stream *s)
 	cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data);
 }
 
-struct cx18_queue *cx18_stream_put_buf_fw(struct cx18_stream *s,
-					  struct cx18_buffer *buf)
+static
+struct cx18_queue *_cx18_stream_put_buf_fw(struct cx18_stream *s,
+					   struct cx18_buffer *buf)
 {
 	struct cx18 *cx = s->cx;
 	struct cx18_queue *q;
 
 	/* Don't give it to the firmware, if we're not running a capture */
 	if (s->handle == CX18_INVALID_TASK_HANDLE ||
+	    test_bit(CX18_F_S_STOPPING, &s->s_flags) ||
 	    !test_bit(CX18_F_S_STREAMING, &s->s_flags))
 		return cx18_enqueue(s, buf, &s->q_free);
 
@@ -453,7 +464,8 @@ struct cx18_queue *cx18_stream_put_buf_fw(struct cx18_stream *s,
 	return q;
 }
 
-void cx18_stream_load_fw_queue(struct cx18_stream *s)
+static
+void _cx18_stream_load_fw_queue(struct cx18_stream *s)
 {
 	struct cx18_queue *q;
 	struct cx18_buffer *buf;
@@ -467,11 +479,19 @@ void cx18_stream_load_fw_queue(struct cx18_stream *s)
 		buf = cx18_dequeue(s, &s->q_free);
 		if (buf == NULL)
 			break;
-		q = cx18_stream_put_buf_fw(s, buf);
+		q = _cx18_stream_put_buf_fw(s, buf);
 	} while (atomic_read(&s->q_busy.buffers) < CX18_MAX_FW_MDLS_PER_STREAM
 		 && q == &s->q_busy);
 }
 
+void cx18_out_work_handler(struct work_struct *work)
+{
+	struct cx18_stream *s =
+			 container_of(work, struct cx18_stream, out_work_order);
+
+	_cx18_stream_load_fw_queue(s);
+}
+
 int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
 {
 	u32 data[MAX_MB_ARGUMENTS];
@@ -600,19 +620,20 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
 
 	/* Init all the cpu_mdls for this stream */
 	cx18_flush_queues(s);
-	mutex_lock(&s->qlock);
+	spin_lock(&s->q_free.lock);
 	list_for_each_entry(buf, &s->q_free.list, list) {
 		cx18_writel(cx, buf->dma_handle,
 					&cx->scb->cpu_mdl[buf->id].paddr);
 		cx18_writel(cx, s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
 	}
-	mutex_unlock(&s->qlock);
-	cx18_stream_load_fw_queue(s);
+	spin_unlock(&s->q_free.lock);
+	_cx18_stream_load_fw_queue(s);
 
 	/* begin_capture */
 	if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
 		CX18_DEBUG_WARN("Error starting capture!\n");
 		/* Ensure we're really not capturing before releasing MDLs */
+		set_bit(CX18_F_S_STOPPING, &s->s_flags);
 		if (s->type == CX18_ENC_STREAM_TYPE_MPG)
 			cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1);
 		else
@@ -622,6 +643,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
 		cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle);
 		cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
 		s->handle = CX18_INVALID_TASK_HANDLE;
+		clear_bit(CX18_F_S_STOPPING, &s->s_flags);
 		if (atomic_read(&cx->tot_capturing) == 0) {
 			set_bit(CX18_F_I_EOS, &cx->i_flags);
 			cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
@@ -666,6 +688,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end)
 	if (atomic_read(&cx->tot_capturing) == 0)
 		return 0;
 
+	set_bit(CX18_F_S_STOPPING, &s->s_flags);
 	if (s->type == CX18_ENC_STREAM_TYPE_MPG)
 		cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, !gop_end);
 	else
@@ -689,6 +712,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end)
 
 	cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
 	s->handle = CX18_INVALID_TASK_HANDLE;
+	clear_bit(CX18_F_S_STOPPING, &s->s_flags);
 
 	if (atomic_read(&cx->tot_capturing) > 0)
 		return 0;
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 420e0a17294..1afc3fd9d82 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -28,10 +28,24 @@ int cx18_streams_setup(struct cx18 *cx);
 int cx18_streams_register(struct cx18 *cx);
 void cx18_streams_cleanup(struct cx18 *cx, int unregister);
 
+/* Related to submission of buffers to firmware */
+static inline void cx18_stream_load_fw_queue(struct cx18_stream *s)
+{
+	struct cx18 *cx = s->cx;
+	queue_work(cx->out_work_queue, &s->out_work_order);
+}
+
+static inline void cx18_stream_put_buf_fw(struct cx18_stream *s,
+					  struct cx18_buffer *buf)
+{
+	/* Put buf on q_free; the out work handler will move buf(s) to q_busy */
+	cx18_enqueue(s, buf, &s->q_free);
+	cx18_stream_load_fw_queue(s);
+}
+
+void cx18_out_work_handler(struct work_struct *work);
+
 /* Capture related */
-void cx18_stream_load_fw_queue(struct cx18_stream *s);
-struct cx18_queue *cx18_stream_put_buf_fw(struct cx18_stream *s,
-					  struct cx18_buffer *buf);
 int cx18_start_v4l2_encode_stream(struct cx18_stream *s);
 int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end);
 
diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h
index bd9bd44da79..45494b094e7 100644
--- a/drivers/media/video/cx18/cx18-version.h
+++ b/drivers/media/video/cx18/cx18-version.h
@@ -24,7 +24,7 @@
 
 #define CX18_DRIVER_NAME "cx18"
 #define CX18_DRIVER_VERSION_MAJOR 1
-#define CX18_DRIVER_VERSION_MINOR 1
+#define CX18_DRIVER_VERSION_MINOR 2
 #define CX18_DRIVER_VERSION_PATCHLEVEL 0
 
 #define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL)
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 1be3881be99..6a9464079b4 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -29,7 +29,6 @@
 #include <linux/bitmap.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index c8a32b1b538..63d2239fd32 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -281,12 +281,12 @@ static void cx231xx_config_tuner(struct cx231xx *dev)
 }
 
 /* ----------------------------------------------------------------------- */
-void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir)
+void cx231xx_register_i2c_ir(struct cx231xx *dev)
 {
-	if (disable_ir) {
-		ir->get_key = NULL;
+	if (disable_ir)
 		return;
-	}
+
+	/* REVISIT: instantiate IR device */
 
 	/* detect & configure */
 	switch (dev->model) {
diff --git a/drivers/media/video/cx231xx/cx231xx-i2c.c b/drivers/media/video/cx231xx/cx231xx-i2c.c
index b4a03d813e0..33219dc4d64 100644
--- a/drivers/media/video/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/video/cx231xx/cx231xx-i2c.c
@@ -424,34 +424,6 @@ static u32 functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
 }
 
-/*
- * attach_inform()
- * gets called when a device attaches to the i2c bus
- * does some basic configuration
- */
-static int attach_inform(struct i2c_client *client)
-{
-	struct cx231xx_i2c *bus = i2c_get_adapdata(client->adapter);
-	struct cx231xx *dev = bus->dev;
-
-	switch (client->addr << 1) {
-	case 0x8e:
-		{
-			struct IR_i2c *ir = i2c_get_clientdata(client);
-			dprintk1(1, "attach_inform: IR detected (%s).\n",
-				 ir->phys);
-			cx231xx_set_ir(dev, ir);
-			break;
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	return 0;
-}
-
 static struct i2c_algorithm cx231xx_algo = {
 	.master_xfer = cx231xx_i2c_xfer,
 	.functionality = functionality,
@@ -462,7 +434,6 @@ static struct i2c_adapter cx231xx_adap_template = {
 	.name = "cx231xx",
 	.id = I2C_HW_B_CX231XX,
 	.algo = &cx231xx_algo,
-	.client_register = attach_inform,
 };
 
 static struct i2c_client cx231xx_client_template = {
@@ -537,6 +508,9 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus)
 	if (0 == bus->i2c_rc) {
 		if (i2c_scan)
 			cx231xx_do_i2c_scan(dev, &bus->i2c_client);
+
+		/* Instantiate the IR receiver device, if present */
+		cx231xx_register_i2c_ir(dev);
 	} else
 		cx231xx_warn("%s: i2c bus %d register FAILED\n",
 			     dev->name, bus->nr);
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
index 97e304c3c79..48f22fa38e6 100644
--- a/drivers/media/video/cx231xx/cx231xx-input.c
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -36,7 +36,7 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
 
 #define i2cdprintk(fmt, arg...) \
 	if (ir_debug) { \
-		printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \
+		printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
 	}
 
 #define dprintk(fmt, arg...) \
diff --git a/drivers/media/video/cx231xx/cx231xx-vbi.c b/drivers/media/video/cx231xx/cx231xx-vbi.c
index 94180526909..e97b8023a65 100644
--- a/drivers/media/video/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/video/cx231xx/cx231xx-vbi.c
@@ -26,7 +26,6 @@
 #include <linux/bitmap.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index aa4a23ef491..e38eb2d425f 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -738,7 +738,7 @@ extern void cx231xx_card_setup(struct cx231xx *dev);
 extern struct cx231xx_board cx231xx_boards[];
 extern struct usb_device_id cx231xx_id_table[];
 extern const unsigned int cx231xx_bcount;
-void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir);
+void cx231xx_register_i2c_ir(struct cx231xx *dev);
 int cx231xx_tuner_callback(void *ptr, int component, int command, int arg);
 
 /* Provided by cx231xx-input.c */
diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c
index 9a6536998d9..08582e58bdb 100644
--- a/drivers/media/video/cx23885/cimax2.c
+++ b/drivers/media/video/cx23885/cimax2.c
@@ -312,7 +312,7 @@ static void netup_read_ci_status(struct work_struct *work)
 		"TS config = %02x\n", __func__, state->ci_i2c_addr, 0, buf[0],
 		buf[32]);
 
-	if (buf[0] && 1)
+	if (buf[0] & 1)
 		state->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
 			DVB_CA_EN50221_POLL_CAM_READY;
 	else
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 6f5df90af93..2943bfd32a9 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -1742,7 +1742,6 @@ static struct video_device *cx23885_video_dev_alloc(
 	if (NULL == vfd)
 		return NULL;
 	*vfd = *template;
-	vfd->minor   = -1;
 	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name,
 		type, cx23885_boards[tsport->dev->board].name);
 	vfd->parent  = &pci->dev;
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 6d6293f7d42..ce29b5e34a1 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -181,6 +181,26 @@ struct cx23885_board cx23885_boards[] = {
 		.portb		= CX23885_MPEG_DVB,
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1270] = {
+		.name		= "Hauppauge WinTV-HVR1270",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1275] = {
+		.name		= "Hauppauge WinTV-HVR1275",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
+		.name		= "Hauppauge WinTV-HVR1255",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
+		.name		= "Hauppauge WinTV-HVR1210",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_MYGICA_X8506] = {
+		.name		= "Mygica X8506 DMB-TH",
+		.portb		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -280,6 +300,30 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x1b55,
 		.subdevice = 0x2a2c,
 		.card      = CX23885_BOARD_NETUP_DUAL_DVBS2_CI,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2211,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1270,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2215,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2251,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2291,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2295,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8651,
+		.card      = CX23885_BOARD_MYGICA_X8506,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -321,6 +365,42 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 
 	/* Make sure we support the board model */
 	switch (tv.model) {
+	case 22001:
+		/* WinTV-HVR1270 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Blast */
+	case 22009:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Blast */
+	case 22011:
+		/* WinTV-HVR1270 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22019:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22021:
+		/* WinTV-HVR1275 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22029:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22101:
+		/* WinTV-HVR1270 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Blast */
+	case 22109:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Blast */
+	case 22111:
+		/* WinTV-HVR1270 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22119:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22121:
+		/* WinTV-HVR1275 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22129:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Recv */
 	case 71009:
 		/* WinTV-HVR1200 (PCIe, Retail, full height)
 		 * DVB-T and basic analog */
@@ -619,6 +699,30 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		/* enable irq */
 		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+		/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
+		/* GPIO-6 I2C Gate which can isolate the demod from the bus */
+		/* GPIO-9 Demod reset */
+
+		/* Put the parts into reset and back */
+		cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1);
+		cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5);
+		cx23885_gpio_clear(dev, GPIO_9);
+		mdelay(20);
+		cx23885_gpio_set(dev, GPIO_9);
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		/* GPIO-1 reset XC5000 */
+		/* GPIO-2 reset LGS8GL5 */
+		cx_set(GP0_IO, 0x00060000);
+		cx_clear(GP0_IO, 0x00000006);
+		mdelay(100);
+		cx_set(GP0_IO, 0x00060006);
+		mdelay(100);
+		break;
 	}
 }
 
@@ -631,6 +735,10 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 		/* FIXME: Implement me */
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
@@ -666,6 +774,10 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
@@ -714,6 +826,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -723,6 +840,10 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index beda42925ce..bf7bb1c412f 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1700,9 +1700,13 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
 	}
 
 	if (cx23885_boards[dev->board].cimax > 0 &&
-		((pci_status & PCI_MSK_GPIO0) || (pci_status & PCI_MSK_GPIO1)))
-		/* handled += cx23885_irq_gpio(dev, pci_status); */
-		handled += netup_ci_slot_status(dev, pci_status);
+		((pci_status & PCI_MSK_GPIO0) ||
+			(pci_status & PCI_MSK_GPIO1))) {
+
+		if (cx23885_boards[dev->board].cimax > 0)
+			handled += netup_ci_slot_status(dev, pci_status);
+
+	}
 
 	if (ts1_status) {
 		if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
@@ -1729,6 +1733,88 @@ out:
 	return IRQ_RETVAL(handled);
 }
 
+static inline int encoder_on_portb(struct cx23885_dev *dev)
+{
+	return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER;
+}
+
+static inline int encoder_on_portc(struct cx23885_dev *dev)
+{
+	return cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER;
+}
+
+/* Mask represents 32 different GPIOs, GPIO's are split into multiple
+ * registers depending on the board configuration (and whether the
+ * 417 encoder (wi it's own GPIO's) are present. Each GPIO bit will
+ * be pushed into the correct hardware register, regardless of the
+ * physical location. Certain registers are shared so we sanity check
+ * and report errors if we think we're tampering with a GPIo that might
+ * be assigned to the encoder (and used for the host bus).
+ *
+ * GPIO  2 thru  0 - On the cx23885 bridge
+ * GPIO 18 thru  3 - On the cx23417 host bus interface
+ * GPIO 23 thru 19 - On the cx25840 a/v core
+ */
+void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x7)
+		cx_set(GP0_IO, mask & 0x7);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			printk(KERN_ERR
+				"%s: Setting GPIO on encoder ports\n",
+				dev->name);
+		cx_set(MC417_RWD, (mask & 0x0007fff8) >> 3);
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		printk(KERN_INFO "%s: Unsupported\n", dev->name);
+}
+
+void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x00000007)
+		cx_clear(GP0_IO, mask & 0x7);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			printk(KERN_ERR
+				"%s: Clearing GPIO moving on encoder ports\n",
+				dev->name);
+		cx_clear(MC417_RWD, (mask & 0x7fff8) >> 3);
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		printk(KERN_INFO "%s: Unsupported\n", dev->name);
+}
+
+void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+	if ((mask & 0x00000007) && asoutput)
+		cx_set(GP0_IO, (mask & 0x7) << 16);
+	else if ((mask & 0x00000007) && !asoutput)
+		cx_clear(GP0_IO, (mask & 0x7) << 16);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			printk(KERN_ERR
+				"%s: Enabling GPIO on encoder ports\n",
+				dev->name);
+	}
+
+	/* MC417_OEN is active low for output, write 1 for an input */
+	if ((mask & 0x0007fff8) && asoutput)
+		cx_clear(MC417_OEN, (mask & 0x7fff8) >> 3);
+
+	else if ((mask & 0x0007fff8) && !asoutput)
+		cx_set(MC417_OEN, (mask & 0x7fff8) >> 3);
+
+	/* TODO: 23-19 */
+}
+
 static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
 				     const struct pci_device_id *pci_id)
 {
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 1dc070da865..e236df23370 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -49,8 +49,10 @@
 #include "lnbh24.h"
 #include "cx24116.h"
 #include "cimax2.h"
+#include "lgs8gxx.h"
 #include "netup-eeprom.h"
 #include "netup-init.h"
+#include "lgdt3305.h"
 
 static unsigned int debug;
 
@@ -122,7 +124,22 @@ static struct tda10048_config hauppauge_hvr1200_config = {
 	.demod_address    = 0x10 >> 1,
 	.output_mode      = TDA10048_SERIAL_OUTPUT,
 	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
-	.inversion        = TDA10048_INVERSION_ON
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3800,
+	.dtv8_if_freq_khz = TDA10048_IF_4300,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+};
+
+static struct tda10048_config hauppauge_hvr1210_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
 };
 
 static struct s5h1409_config hauppauge_ezqam_config = {
@@ -194,6 +211,16 @@ static struct s5h1411_config dvico_s5h1411_config = {
 	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 };
 
+static struct s5h1411_config hcw_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.vsb_if        = S5H1411_IF_44000,
+	.qam_if        = S5H1411_IF_4000,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
 	.i2c_address      = 0x61,
 	.if_khz           = 5380,
@@ -224,6 +251,32 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = {
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
+static struct tda18271_config hauppauge_hvr1210_tuner_config = {
+	.gate    = TDA18271_GATE_DIGITAL,
+};
+
+static struct tda18271_std_map hauppauge_hvr127x_std_map = {
+	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x58 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x58 },
+};
+
+static struct tda18271_config hauppauge_hvr127x_config = {
+	.std_map = &hauppauge_hvr127x_std_map,
+};
+
+static struct lgdt3305_config hauppauge_lgdt3305_config = {
+	.i2c_addr           = 0x0e,
+	.mpeg_mode          = LGDT3305_MPEG_SERIAL,
+	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
+	.tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,
+	.deny_i2c_rptr      = 1,
+	.spectral_inversion = 1,
+	.qam_if_khz         = 4000,
+	.vsb_if_khz         = 3250,
+};
+
 static struct dibx000_agc_config xc3028_agc_config = {
 	BAND_VHF | BAND_UHF,	/* band_caps */
 
@@ -368,10 +421,29 @@ static struct cx24116_config dvbworld_cx24116_config = {
 	.demod_address = 0x05,
 };
 
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+	.prod = LGS8GXX_PROD_LGS8GL5,
+	.demod_address = 0x19,
+	.serial_ts = 0,
+	.ts_clk_pol = 1,
+	.ts_clk_gated = 1,
+	.if_clk_freq = 30400, /* 30.4 MHz */
+	.if_freq = 5380, /* 5.38 MHz */
+	.if_neg_center = 1,
+	.ext_adc = 0,
+	.adc_signed = 0,
+	.if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 5380,
+};
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
-	struct cx23885_i2c *i2c_bus = NULL;
+	struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
 	struct videobuf_dvb_frontend *fe0;
 	int ret;
 
@@ -396,6 +468,29 @@ static int dvb_register(struct cx23885_tsport *port)
 				   &hauppauge_generic_tunerconfig, 0);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+					       &hauppauge_lgdt3305_config,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_bus[1].i2c_adap,
+				   &hauppauge_hvr127x_config);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+					       &hcw_s5h1411_config,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_bus[1].i2c_adap,
+				   &hauppauge_tda18271_config);
+		}
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 		i2c_bus = &dev->i2c_bus[0];
 		switch (alt_tuner) {
@@ -496,6 +591,17 @@ static int dvb_register(struct cx23885_tsport *port)
 				&hauppauge_hvr1200_tuner_config);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
+			&hauppauge_hvr1210_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[1].i2c_adap,
+				&hauppauge_hvr1210_tuner_config);
+		}
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 		i2c_bus = &dev->i2c_bus[0];
 		fe0->dvb.frontend = dvb_attach(dib7000p_attach,
@@ -659,6 +765,19 @@ static int dvb_register(struct cx23885_tsport *port)
 			break;
 		}
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+			&mygica_x8506_lgs8gl5_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(xc5000_attach,
+				fe0->dvb.frontend,
+				&i2c_bus2->i2c_adap,
+				&mygica_x8506_xc5000_config);
+		}
+		break;
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
 			" isn't supported yet\n",
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 3421bd12056..384dec34134 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -357,6 +357,18 @@ int cx23885_i2c_register(struct cx23885_i2c *bus)
 		printk(KERN_WARNING "%s: i2c bus %d register FAILED\n",
 			dev->name, bus->nr);
 
+	/* Instantiate the IR receiver device, if present */
+	if (0 == bus->i2c_rc) {
+		struct i2c_board_info info;
+		const unsigned short addr_list[] = {
+			0x6b, I2C_CLIENT_END
+		};
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+		i2c_new_probed_device(&bus->i2c_adap, &info, addr_list);
+	}
+
 	return bus->i2c_rc;
 }
 
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 68068c6d098..66bbd2e7110 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -796,6 +796,7 @@ static unsigned int video_poll(struct file *file,
 {
 	struct cx23885_fh *fh = file->private_data;
 	struct cx23885_buffer *buf;
+	unsigned int rc = POLLERR;
 
 	if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) {
 		if (!res_get(fh->dev, fh, RESOURCE_VBI))
@@ -803,23 +804,28 @@ static unsigned int video_poll(struct file *file,
 		return videobuf_poll_stream(file, &fh->vbiq, wait);
 	}
 
+	mutex_lock(&fh->vidq.vb_lock);
 	if (res_check(fh, RESOURCE_VIDEO)) {
 		/* streaming capture */
 		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
+			goto done;
 		buf = list_entry(fh->vidq.stream.next,
 			struct cx23885_buffer, vb.stream);
 	} else {
 		/* read() capture */
 		buf = (struct cx23885_buffer *)fh->vidq.read_buf;
 		if (NULL == buf)
-			return POLLERR;
+			goto done;
 	}
 	poll_wait(file, &buf->vb.done, wait);
 	if (buf->vb.state == VIDEOBUF_DONE ||
 	    buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN|POLLRDNORM;
-	return 0;
+		rc =  POLLIN|POLLRDNORM;
+	else
+		rc = 0;
+done:
+	mutex_unlock(&fh->vidq.vb_lock);
+	return rc;
 }
 
 static int video_release(struct file *file)
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 85642831ea8..1a2ac518a3f 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -71,6 +71,22 @@
 #define CX23885_BOARD_TEVII_S470               15
 #define CX23885_BOARD_DVBWORLD_2005            16
 #define CX23885_BOARD_NETUP_DUAL_DVBS2_CI      17
+#define CX23885_BOARD_HAUPPAUGE_HVR1270        18
+#define CX23885_BOARD_HAUPPAUGE_HVR1275        19
+#define CX23885_BOARD_HAUPPAUGE_HVR1255        20
+#define CX23885_BOARD_HAUPPAUGE_HVR1210        21
+#define CX23885_BOARD_MYGICA_X8506             22
+
+#define GPIO_0 0x00000001
+#define GPIO_1 0x00000002
+#define GPIO_2 0x00000004
+#define GPIO_3 0x00000008
+#define GPIO_4 0x00000010
+#define GPIO_5 0x00000020
+#define GPIO_6 0x00000040
+#define GPIO_7 0x00000080
+#define GPIO_8 0x00000100
+#define GPIO_9 0x00000200
 
 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
 #define CX23885_NORMS (\
@@ -422,6 +438,11 @@ extern int cx23885_restart_queue(struct cx23885_tsport *port,
 extern void cx23885_wakeup(struct cx23885_tsport *port,
 			   struct cx23885_dmaqueue *q, u32 count);
 
+extern void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask,
+	int asoutput);
+
 
 /* ----------------------------------------------------------- */
 /* cx23885-cards.c                                             */
diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile
index b06b1275a9e..5b7e26761f0 100644
--- a/drivers/media/video/cx88/Makefile
+++ b/drivers/media/video/cx88/Makefile
@@ -1,5 +1,5 @@
 cx88xx-objs	:= cx88-cards.o cx88-core.o cx88-i2c.o cx88-tvaudio.o \
-		   cx88-input.o
+		   cx88-dsp.o cx88-input.o
 cx8800-objs	:= cx88-video.o cx88-vbi.o
 cx8802-objs	:= cx88-mpeg.o
 
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 0ccdf36626e..5a67445dd6e 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -871,7 +871,7 @@ static struct pci_driver cx88_audio_pci_driver = {
 	.name     = "cx88_audio",
 	.id_table = cx88_audio_pci_tbl,
 	.probe    = cx88_audio_initdev,
-	.remove   = cx88_audio_finidev,
+	.remove   = __devexit_p(cx88_audio_finidev),
 };
 
 /****************************************************************************
@@ -881,7 +881,7 @@ static struct pci_driver cx88_audio_pci_driver = {
 /*
  * module init
  */
-static int cx88_audio_init(void)
+static int __init cx88_audio_init(void)
 {
 	printk(KERN_INFO "cx2388x alsa driver version %d.%d.%d loaded\n",
 	       (CX88_VERSION_CODE >> 16) & 0xff,
@@ -897,9 +897,8 @@ static int cx88_audio_init(void)
 /*
  * module remove
  */
-static void cx88_audio_fini(void)
+static void __exit cx88_audio_fini(void)
 {
-
 	pci_unregister_driver(&cx88_audio_pci_driver);
 }
 
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 6bbbfc66bb4..94b7a52629d 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1969,6 +1969,54 @@ static const struct cx88_board cx88_boards[] = {
 		},
 		.mpeg           = CX88_MPEG_DVB,
 	},
+	[CX88_BOARD_HAUPPAUGE_IRONLY] = {
+		.name           = "Hauppauge WinTV-IR Only",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+	},
+	[CX88_BOARD_WINFAST_DTV1800H] = {
+		.name           = "Leadtek WinFast DTV1800 Hybrid",
+		.tuner_type     = TUNER_XC2028,
+		.radio_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.radio_addr     = 0x61,
+		/*
+		 * GPIO setting
+		 *
+		 *  2: mute (0=off,1=on)
+		 * 12: tuner reset pin
+		 * 13: audio source (0=tuner audio,1=line in)
+		 * 14: FM (0=on,1=off ???)
+		 */
+		.input          = {{
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6040,       /* pin 13 = 0, pin 14 = 1 */
+			.gpio2  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6060,       /* pin 13 = 1, pin 14 = 1 */
+			.gpio2  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6060,       /* pin 13 = 1, pin 14 = 1 */
+			.gpio2  = 0x0000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6000,       /* pin 13 = 0, pin 14 = 0 */
+			.gpio2  = 0x0000,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
 };
 
 /* ------------------------------------------------------------------ */
@@ -2382,6 +2430,14 @@ static const struct cx88_subid cx88_subids[] = {
 		.subvendor = 0x153b,
 		.subdevice = 0x1177,
 		.card      = CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9290,
+		.card      = CX88_BOARD_HAUPPAUGE_IRONLY,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6654,
+		.card      = CX88_BOARD_WINFAST_DTV1800H,
 	},
 };
 
@@ -2448,6 +2504,7 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
 	case 90500: /* Nova-T-PCI (oem) */
 	case 90501: /* Nova-T-PCI (oem/IR) */
 	case 92000: /* Nova-SE2 (OEM, No Video or IR) */
+	case 92900: /* WinTV-IROnly (No analog or digital Video inputs) */
 	case 94009: /* WinTV-HVR1100 (Video and IR Retail) */
 	case 94501: /* WinTV-HVR1100 (Video and IR OEM) */
 	case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */
@@ -2579,6 +2636,23 @@ static int cx88_xc3028_geniatech_tuner_callback(struct cx88_core *core,
 	return -EINVAL;
 }
 
+static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core,
+					     int command, int arg)
+{
+	switch (command) {
+	case XC2028_TUNER_RESET:
+		/* GPIO 12 (xc3028 tuner reset) */
+		cx_set(MO_GP1_IO, 0x1010);
+		mdelay(50);
+		cx_clear(MO_GP1_IO, 0x10);
+		mdelay(50);
+		cx_set(MO_GP1_IO, 0x10);
+		mdelay(50);
+		return 0;
+	}
+	return -EINVAL;
+}
+
 /* ------------------------------------------------------------------- */
 /* some Divco specific stuff                                           */
 static int cx88_pv_8000gt_callback(struct cx88_core *core,
@@ -2651,6 +2725,8 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
 	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
 		return cx88_dvico_xc2028_callback(core, command, arg);
+	case CX88_BOARD_WINFAST_DTV1800H:
+		return cx88_xc3028_winfast1800h_callback(core, command, arg);
 	}
 
 	switch (command) {
@@ -2690,10 +2766,22 @@ static int cx88_xc5000_tuner_callback(struct cx88_core *core,
 	switch (core->boardnr) {
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		if (command == 0) { /* This is the reset command from xc5000 */
-			/* Reset XC5000 tuner via SYS_RSTO_pin */
-			cx_write(MO_SRST_IO, 0);
-			msleep(10);
-			cx_write(MO_SRST_IO, 1);
+
+			/* djh - According to the engineer at PCTV Systems,
+			   the xc5000 reset pin is supposed to be on GPIO12.
+			   However, despite three nights of effort, pulling
+			   that GPIO low didn't reset the xc5000.  While
+			   pulling MO_SRST_IO low does reset the xc5000, this
+			   also resets in the s5h1409 being reset as well.
+			   This causes tuning to always fail since the internal
+			   state of the s5h1409 does not match the driver's
+			   state.  Given that the only two conditions in which
+			   the driver performs a reset is during firmware load
+			   and powering down the chip, I am taking out the
+			   reset.  We know that the chip is being reset
+			   when the cx88 comes online, and not being able to
+			   do power management for this board is worse than
+			   not having any tuning at all. */
 			return 0;
 		} else {
 			err_printk(core, "xc5000: unknown tuner "
@@ -2825,6 +2913,16 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core)
 		cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
 		udelay(1000);
 		break;
+
+	case CX88_BOARD_WINFAST_DTV1800H:
+		/* GPIO 12 (xc3028 tuner reset) */
+		cx_set(MO_GP1_IO, 0x1010);
+		mdelay(50);
+		cx_clear(MO_GP1_IO, 0x10);
+		mdelay(50);
+		cx_set(MO_GP1_IO, 0x10);
+		mdelay(50);
+		break;
 	}
 }
 
@@ -2845,6 +2943,7 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
 			core->i2c_algo.udelay = 16;
 		break;
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+	case CX88_BOARD_WINFAST_DTV1800H:
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
 	case CX88_BOARD_KWORLD_ATSC_120:
@@ -2907,6 +3006,7 @@ static void cx88_card_setup(struct cx88_core *core)
 	case CX88_BOARD_HAUPPAUGE_HVR1300:
 	case CX88_BOARD_HAUPPAUGE_HVR4000:
 	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+	case CX88_BOARD_HAUPPAUGE_IRONLY:
 		if (0 == core->i2c_rc)
 			hauppauge_eeprom(core, eeprom);
 		break;
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 0e149b22bd1..cf634606ba9 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -231,7 +231,7 @@ cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf)
  * can use the whole SDRAM for the DMA fifos.  To simplify things, we
  * use a static memory layout.  That surely will waste memory in case
  * we don't use all DMA channels at the same time (which will be the
- * case most of the time).  But that still gives us enougth FIFO space
+ * case most of the time).  But that still gives us enough FIFO space
  * to be able to deal with insane long pci latencies ...
  *
  * FIFO space allocations:
@@ -241,6 +241,7 @@ cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf)
  *    channel  24    (vbi)      -  4.0k
  *    channels 25+26 (audio)    -  4.0k
  *    channel  28    (mpeg)     -  4.0k
+ *    channel  27    (audio rds)-  3.0k
  *    TOTAL                     = 29.0k
  *
  * Every channel has 160 bytes control data (64 bytes instruction
@@ -337,6 +338,18 @@ struct sram_channel cx88_sram_channels[] = {
 		.cnt1_reg   = MO_DMA28_CNT1,
 		.cnt2_reg   = MO_DMA28_CNT2,
 	},
+	[SRAM_CH27] = {
+		.name       = "audio rds",
+		.cmds_start = 0x1801C0,
+		.ctrl_start = 0x180860,
+		.cdt        = 0x180860 + 64,
+		.fifo_start = 0x187400,
+		.fifo_size  = 0x000C00,
+		.ptr1_reg   = MO_DMA27_PTR1,
+		.ptr2_reg   = MO_DMA27_PTR2,
+		.cnt1_reg   = MO_DMA27_CNT1,
+		.cnt2_reg   = MO_DMA27_CNT2,
+	},
 };
 
 int cx88_sram_channel_setup(struct cx88_core *core,
@@ -598,6 +611,7 @@ int cx88_reset(struct cx88_core *core)
 	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
 	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
 	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH28], 188*4, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH27], 128, 0);
 
 	/* misc init ... */
 	cx_write(MO_INPUT_FORMAT, ((1 << 13) |   // agc enable
@@ -796,6 +810,8 @@ int cx88_start_audio_dma(struct cx88_core *core)
 	/* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */
 	int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4;
 
+	int rds_bpl = cx88_sram_channels[SRAM_CH27].fifo_size/AUD_RDS_LINES;
+
 	/* If downstream RISC is enabled, bail out; ALSA is managing DMA */
 	if (cx_read(MO_AUD_DMACNTRL) & 0x10)
 		return 0;
@@ -803,12 +819,14 @@ int cx88_start_audio_dma(struct cx88_core *core)
 	/* setup fifo + format */
 	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0);
 	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH27],
+				rds_bpl, 0);
 
 	cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */
-	cx_write(MO_AUDR_LNGTH, bpl); /* fifo bpl size */
+	cx_write(MO_AUDR_LNGTH, rds_bpl); /* fifo bpl size */
 
-	/* start dma */
-	cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */
+	/* enable Up, Down and Audio RDS fifo */
+	cx_write(MO_AUD_DMACNTRL, 0x0007);
 
 	return 0;
 }
@@ -1010,7 +1028,6 @@ struct video_device *cx88_vdev_init(struct cx88_core *core,
 	if (NULL == vfd)
 		return NULL;
 	*vfd = *template;
-	vfd->minor   = -1;
 	vfd->v4l2_dev = &core->v4l2_dev;
 	vfd->parent = &pci->dev;
 	vfd->release = video_device_release;
diff --git a/drivers/media/video/cx88/cx88-dsp.c b/drivers/media/video/cx88/cx88-dsp.c
new file mode 100644
index 00000000000..3e5eaf3fe2a
--- /dev/null
+++ b/drivers/media/video/cx88/cx88-dsp.c
@@ -0,0 +1,312 @@
+/*
+ *
+ *  Stereo and SAP detection for cx88
+ *
+ *  Copyright (c) 2009 Marton Balint <cus@fazekas.hu>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <asm/div64.h>
+
+#include "cx88.h"
+#include "cx88-reg.h"
+
+#define INT_PI			((s32)(3.141592653589 * 32768.0))
+
+#define compat_remainder(a, b) \
+	 ((float)(((s32)((a)*100))%((s32)((b)*100)))/100.0)
+
+#define baseband_freq(carrier, srate, tone) ((s32)( \
+	 (compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
+
+/* We calculate the baseband frequencies of the carrier and the pilot tones
+ * based on the the sampling rate of the audio rds fifo. */
+
+#define FREQ_A2_CARRIER         baseband_freq(54687.5, 2689.36, 0.0)
+#define FREQ_A2_DUAL            baseband_freq(54687.5, 2689.36, 274.1)
+#define FREQ_A2_STEREO          baseband_freq(54687.5, 2689.36, 117.5)
+
+/* The frequencies below are from the reference driver. They probably need
+ * further adjustments, because they are not tested at all. You may even need
+ * to play a bit with the registers of the chip to select the proper signal
+ * for the input of the audio rds fifo, and measure it's sampling rate to
+ * calculate the proper baseband frequencies... */
+
+#define FREQ_A2M_CARRIER	((s32)(2.114516 * 32768.0))
+#define FREQ_A2M_DUAL		((s32)(2.754916 * 32768.0))
+#define FREQ_A2M_STEREO		((s32)(2.462326 * 32768.0))
+
+#define FREQ_EIAJ_CARRIER	((s32)(1.963495 * 32768.0)) /* 5pi/8  */
+#define FREQ_EIAJ_DUAL		((s32)(2.562118 * 32768.0))
+#define FREQ_EIAJ_STEREO	((s32)(2.601053 * 32768.0))
+
+#define FREQ_BTSC_DUAL		((s32)(1.963495 * 32768.0)) /* 5pi/8  */
+#define FREQ_BTSC_DUAL_REF	((s32)(1.374446 * 32768.0)) /* 7pi/16 */
+
+#define FREQ_BTSC_SAP		((s32)(2.471532 * 32768.0))
+#define FREQ_BTSC_SAP_REF	((s32)(1.730072 * 32768.0))
+
+/* The spectrum of the signal should be empty between these frequencies. */
+#define FREQ_NOISE_START	((s32)(0.100000 * 32768.0))
+#define FREQ_NOISE_END		((s32)(1.200000 * 32768.0))
+
+static unsigned int dsp_debug;
+module_param(dsp_debug, int, 0644);
+MODULE_PARM_DESC(dsp_debug, "enable audio dsp debug messages");
+
+#define dprintk(level, fmt, arg...)	if (dsp_debug >= level) \
+	printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
+
+static s32 int_cos(u32 x)
+{
+	u32 t2, t4, t6, t8;
+	s32 ret;
+	u16 period = x / INT_PI;
+	if (period % 2)
+		return -int_cos(x - INT_PI);
+	x = x % INT_PI;
+	if (x > INT_PI/2)
+		return -int_cos(INT_PI/2 - (x % (INT_PI/2)));
+	/* Now x is between 0 and INT_PI/2.
+	 * To calculate cos(x) we use it's Taylor polinom. */
+	t2 = x*x/32768/2;
+	t4 = t2*x/32768*x/32768/3/4;
+	t6 = t4*x/32768*x/32768/5/6;
+	t8 = t6*x/32768*x/32768/7/8;
+	ret = 32768-t2+t4-t6+t8;
+	return ret;
+}
+
+static u32 int_goertzel(s16 x[], u32 N, u32 freq)
+{
+	/* We use the Goertzel algorithm to determine the power of the
+	 * given frequency in the signal */
+	s32 s_prev = 0;
+	s32 s_prev2 = 0;
+	s32 coeff = 2*int_cos(freq);
+	u32 i;
+
+	u64 tmp;
+	u32 divisor;
+
+	for (i = 0; i < N; i++) {
+		s32 s = x[i] + ((s64)coeff*s_prev/32768) - s_prev2;
+		s_prev2 = s_prev;
+		s_prev = s;
+	}
+
+	tmp = (s64)s_prev2 * s_prev2 + (s64)s_prev * s_prev -
+		      (s64)coeff * s_prev2 * s_prev / 32768;
+
+	/* XXX: N must be low enough so that N*N fits in s32.
+	 * Else we need two divisions. */
+	divisor = N * N;
+	do_div(tmp, divisor);
+
+	return (u32) tmp;
+}
+
+static u32 freq_magnitude(s16 x[], u32 N, u32 freq)
+{
+	u32 sum = int_goertzel(x, N, freq);
+	return (u32)int_sqrt(sum);
+}
+
+static u32 noise_magnitude(s16 x[], u32 N, u32 freq_start, u32 freq_end)
+{
+	int i;
+	u32 sum = 0;
+	u32 freq_step;
+	int samples = 5;
+
+	if (N > 192) {
+		/* The last 192 samples are enough for noise detection */
+		x += (N-192);
+		N = 192;
+	}
+
+	freq_step = (freq_end - freq_start) / (samples - 1);
+
+	for (i = 0; i < samples; i++) {
+		sum += int_goertzel(x, N, freq_start);
+		freq_start += freq_step;
+	}
+
+	return (u32)int_sqrt(sum / samples);
+}
+
+static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N)
+{
+	s32 carrier, stereo, dual, noise;
+	s32 carrier_freq, stereo_freq, dual_freq;
+	s32 ret;
+
+	switch (core->tvaudio) {
+	case WW_BG:
+	case WW_DK:
+		carrier_freq = FREQ_A2_CARRIER;
+		stereo_freq = FREQ_A2_STEREO;
+		dual_freq = FREQ_A2_DUAL;
+		break;
+	case WW_M:
+		carrier_freq = FREQ_A2M_CARRIER;
+		stereo_freq = FREQ_A2M_STEREO;
+		dual_freq = FREQ_A2M_DUAL;
+		break;
+	case WW_EIAJ:
+		carrier_freq = FREQ_EIAJ_CARRIER;
+		stereo_freq = FREQ_EIAJ_STEREO;
+		dual_freq = FREQ_EIAJ_DUAL;
+		break;
+	default:
+		printk(KERN_WARNING "%s/0: unsupported audio mode %d for %s\n",
+		       core->name, core->tvaudio, __func__);
+		return UNSET;
+	}
+
+	carrier = freq_magnitude(x, N, carrier_freq);
+	stereo  = freq_magnitude(x, N, stereo_freq);
+	dual    = freq_magnitude(x, N, dual_freq);
+	noise   = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END);
+
+	dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, "
+		   "noise=%d\n", carrier, stereo, dual, noise);
+
+	if (stereo > dual)
+		ret = V4L2_TUNER_SUB_STEREO;
+	else
+		ret = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+
+	if (core->tvaudio == WW_EIAJ) {
+		/* EIAJ checks may need adjustments */
+		if ((carrier > max(stereo, dual)*2) &&
+		    (carrier < max(stereo, dual)*6) &&
+		    (carrier > 20 && carrier < 200) &&
+		    (max(stereo, dual) > min(stereo, dual))) {
+			/* For EIAJ the carrier is always present,
+			   so we probably don't need noise detection */
+			return ret;
+		}
+	} else {
+		if ((carrier > max(stereo, dual)*2) &&
+		    (carrier < max(stereo, dual)*8) &&
+		    (carrier > 20 && carrier < 200) &&
+		    (noise < 10) &&
+		    (max(stereo, dual) > min(stereo, dual)*2)) {
+			return ret;
+		}
+	}
+	return V4L2_TUNER_SUB_MONO;
+}
+
+static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N)
+{
+	s32 sap_ref = freq_magnitude(x, N, FREQ_BTSC_SAP_REF);
+	s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP);
+	s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF);
+	s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL);
+	dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d"
+		   "\n", dual_ref, dual, sap_ref, sap);
+	/* FIXME: Currently not supported */
+	return UNSET;
+}
+
+static s16 *read_rds_samples(struct cx88_core *core, u32 *N)
+{
+	struct sram_channel *srch = &cx88_sram_channels[SRAM_CH27];
+	s16 *samples;
+
+	unsigned int i;
+	unsigned int bpl = srch->fifo_size/AUD_RDS_LINES;
+	unsigned int spl = bpl/4;
+	unsigned int sample_count = spl*(AUD_RDS_LINES-1);
+
+	u32 current_address = cx_read(srch->ptr1_reg);
+	u32 offset = (current_address - srch->fifo_start + bpl);
+
+	dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), "
+		"sample_count=%d, aud_intstat=%08x\n", current_address,
+		current_address - srch->fifo_start, sample_count,
+		cx_read(MO_AUD_INTSTAT));
+
+	samples = kmalloc(sizeof(s16)*sample_count, GFP_KERNEL);
+	if (!samples)
+		return NULL;
+
+	*N = sample_count;
+
+	for (i = 0; i < sample_count; i++)  {
+		offset = offset % (AUD_RDS_LINES*bpl);
+		samples[i] = cx_read(srch->fifo_start + offset);
+		offset += 4;
+	}
+
+	if (dsp_debug >= 2) {
+		dprintk(2, "RDS samples dump: ");
+		for (i = 0; i < sample_count; i++)
+			printk("%hd ", samples[i]);
+		printk(".\n");
+	}
+
+	return samples;
+}
+
+s32 cx88_dsp_detect_stereo_sap(struct cx88_core *core)
+{
+	s16 *samples;
+	u32 N = 0;
+	s32 ret = UNSET;
+
+	/* If audio RDS fifo is disabled, we can't read the samples */
+	if (!(cx_read(MO_AUD_DMACNTRL) & 0x04))
+		return ret;
+	if (!(cx_read(AUD_CTL) & EN_FMRADIO_EN_RDS))
+		return ret;
+
+	/* Wait at least 500 ms after an audio standard change */
+	if (time_before(jiffies, core->last_change + msecs_to_jiffies(500)))
+		return ret;
+
+	samples = read_rds_samples(core, &N);
+
+	if (!samples)
+		return ret;
+
+	switch (core->tvaudio) {
+	case WW_BG:
+	case WW_DK:
+		ret = detect_a2_a2m_eiaj(core, samples, N);
+		break;
+	case WW_BTSC:
+		ret = detect_btsc(core, samples, N);
+		break;
+	}
+
+	kfree(samples);
+
+	if (UNSET != ret)
+		dprintk(1, "stereo/sap detection result:%s%s%s\n",
+			   (ret & V4L2_TUNER_SUB_MONO) ? " mono" : "",
+			   (ret & V4L2_TUNER_SUB_STEREO) ? " stereo" : "",
+			   (ret & V4L2_TUNER_SUB_LANG2) ? " dual" : "");
+
+	return ret;
+}
+EXPORT_SYMBOL(cx88_dsp_detect_stereo_sap);
+
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 9389cf290c1..c44e8760021 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -1014,6 +1014,7 @@ static int dvb_register(struct cx8802_dev *dev)
 		}
 		break;
 	 case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+	case CX88_BOARD_WINFAST_DTV1800H:
 		fe0->dvb.frontend = dvb_attach(zl10353_attach,
 					       &cx88_pinnacle_hybrid_pctv,
 					       &core->i2c_adap);
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index 996b4ed5a4f..ee1ca39db06 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -180,6 +180,19 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
 			do_i2c_scan(core->name,&core->i2c_client);
 	} else
 		printk("%s: i2c register FAILED\n", core->name);
+
+	/* Instantiate the IR receiver device, if present */
+	if (0 == core->i2c_rc) {
+		struct i2c_board_info info;
+		const unsigned short addr_list[] = {
+			0x18, 0x6b, 0x71,
+			I2C_CLIENT_END
+		};
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+		i2c_new_probed_device(&core->i2c_adap, &info, addr_list);
+	}
 	return core->i2c_rc;
 }
 
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index ec05312a9b6..d91f5c51206 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -91,6 +91,8 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 		gpio=(gpio & 0x7fd) + (auxgpio & 0xef);
 		break;
 	case CX88_BOARD_WINFAST_DTV1000:
+	case CX88_BOARD_WINFAST_DTV1800H:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 		gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900);
 		auxgpio = gpio;
 		break;
@@ -217,11 +219,13 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
 	case CX88_BOARD_PCHDTV_HD3000:
 	case CX88_BOARD_PCHDTV_HD5500:
+	case CX88_BOARD_HAUPPAUGE_IRONLY:
 		ir_codes = ir_codes_hauppauge_new;
 		ir_type = IR_TYPE_RC5;
 		ir->sampling = 1;
 		break;
 	case CX88_BOARD_WINFAST_DTV2000H:
+	case CX88_BOARD_WINFAST_DTV1800H:
 		ir_codes = ir_codes_winfast;
 		ir->gpio_addr = MO_GP0_IO;
 		ir->mask_keycode = 0x8f8;
@@ -230,6 +234,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_WINFAST2000XP_EXPERT:
 	case CX88_BOARD_WINFAST_DTV1000:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 		ir_codes = ir_codes_winfast;
 		ir->gpio_addr = MO_GP0_IO;
 		ir->mask_keycode = 0x8f8;
@@ -459,6 +464,7 @@ void cx88_ir_irq(struct cx88_core *core)
 	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
 	case CX88_BOARD_PCHDTV_HD3000:
 	case CX88_BOARD_PCHDTV_HD5500:
+	case CX88_BOARD_HAUPPAUGE_IRONLY:
 		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
 		ir_dprintk("biphase decoded: %x\n", ircode);
 		/*
diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c
index 7dd506b987f..e8316cf7f32 100644
--- a/drivers/media/video/cx88/cx88-tvaudio.c
+++ b/drivers/media/video/cx88/cx88-tvaudio.c
@@ -163,6 +163,8 @@ static void set_audio_finish(struct cx88_core *core, u32 ctl)
 	/* unmute */
 	volume = cx_sread(SHADOW_AUD_VOL_CTL);
 	cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, volume);
+
+	core->last_change = jiffies;
 }
 
 /* ----------------------------------------------------------- */
@@ -745,6 +747,7 @@ void cx88_set_tvaudio(struct cx88_core *core)
 		break;
 	case WW_BG:
 	case WW_DK:
+	case WW_M:
 	case WW_I:
 	case WW_L:
 		/* prepare all dsp registers */
@@ -756,6 +759,7 @@ void cx88_set_tvaudio(struct cx88_core *core)
 		if (0 == cx88_detect_nicam(core)) {
 			/* fall back to fm / am mono */
 			set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
+			core->audiomode_current = V4L2_TUNER_MODE_MONO;
 			core->use_nicam = 0;
 		} else {
 			core->use_nicam = 1;
@@ -787,6 +791,7 @@ void cx88_set_tvaudio(struct cx88_core *core)
 void cx88_newstation(struct cx88_core *core)
 {
 	core->audiomode_manual = UNSET;
+	core->last_change = jiffies;
 }
 
 void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t)
@@ -805,12 +810,50 @@ void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t)
 			aud_ctl_names[cx_read(AUD_CTL) & 63]);
 	core->astat = reg;
 
-/* TODO
-	Reading from AUD_STATUS is not enough
-	for auto-detecting sap/dual-fm/nicam.
-	Add some code here later.
-*/
+	t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP |
+	    V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
+	t->rxsubchans = UNSET;
+	t->audmode = V4L2_TUNER_MODE_MONO;
+
+	switch (mode) {
+	case 0:
+		t->audmode = V4L2_TUNER_MODE_STEREO;
+		break;
+	case 1:
+		t->audmode = V4L2_TUNER_MODE_LANG2;
+		break;
+	case 2:
+		t->audmode = V4L2_TUNER_MODE_MONO;
+		break;
+	case 3:
+		t->audmode = V4L2_TUNER_MODE_SAP;
+		break;
+	}
 
+	switch (core->tvaudio) {
+	case WW_BTSC:
+	case WW_BG:
+	case WW_DK:
+	case WW_M:
+	case WW_EIAJ:
+		if (!core->use_nicam) {
+			t->rxsubchans = cx88_dsp_detect_stereo_sap(core);
+			break;
+		}
+		break;
+	default:
+		/* nothing */
+		break;
+	}
+
+	/* If software stereo detection is not supported... */
+	if (UNSET == t->rxsubchans) {
+		t->rxsubchans = V4L2_TUNER_SUB_MONO;
+		/* If the hardware itself detected stereo, also return
+		   stereo as an available subchannel */
+		if (V4L2_TUNER_MODE_STEREO == t->audmode)
+			t->rxsubchans |= V4L2_TUNER_SUB_STEREO;
+	}
 	return;
 }
 
@@ -847,6 +890,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
 		break;
 	case WW_BG:
 	case WW_DK:
+	case WW_M:
 	case WW_I:
 	case WW_L:
 		if (1 == core->use_nicam) {
@@ -872,20 +916,18 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
 				set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
 			} else {
 				/* TODO: Add A2 autodection */
+				mask = 0x3f;
 				switch (mode) {
 				case V4L2_TUNER_MODE_MONO:
 				case V4L2_TUNER_MODE_LANG1:
-					set_audio_standard_A2(core,
-							      EN_A2_FORCE_MONO1);
+					ctl = EN_A2_FORCE_MONO1;
 					break;
 				case V4L2_TUNER_MODE_LANG2:
-					set_audio_standard_A2(core,
-							      EN_A2_FORCE_MONO2);
+					ctl = EN_A2_FORCE_MONO2;
 					break;
 				case V4L2_TUNER_MODE_STEREO:
 				case V4L2_TUNER_MODE_LANG1_LANG2:
-					set_audio_standard_A2(core,
-							      EN_A2_FORCE_STEREO);
+					ctl = EN_A2_FORCE_STEREO;
 					break;
 				}
 			}
@@ -932,24 +974,39 @@ int cx88_audio_thread(void *data)
 			break;
 		try_to_freeze();
 
-		/* just monitor the audio status for now ... */
-		memset(&t, 0, sizeof(t));
-		cx88_get_stereo(core, &t);
-
-		if (UNSET != core->audiomode_manual)
-			/* manually set, don't do anything. */
-			continue;
-
-		/* monitor signal */
-		if (t.rxsubchans & V4L2_TUNER_SUB_STEREO)
-			mode = V4L2_TUNER_MODE_STEREO;
-		else
-			mode = V4L2_TUNER_MODE_MONO;
-		if (mode == core->audiomode_current)
-			continue;
-
-		/* automatically switch to best available mode */
-		cx88_set_stereo(core, mode, 0);
+		switch (core->tvaudio) {
+		case WW_BG:
+		case WW_DK:
+		case WW_M:
+		case WW_I:
+		case WW_L:
+			if (core->use_nicam)
+				goto hw_autodetect;
+
+			/* just monitor the audio status for now ... */
+			memset(&t, 0, sizeof(t));
+			cx88_get_stereo(core, &t);
+
+			if (UNSET != core->audiomode_manual)
+				/* manually set, don't do anything. */
+				continue;
+
+			/* monitor signal and set stereo if available */
+			if (t.rxsubchans & V4L2_TUNER_SUB_STEREO)
+				mode = V4L2_TUNER_MODE_STEREO;
+			else
+				mode = V4L2_TUNER_MODE_MONO;
+			if (mode == core->audiomode_current)
+				continue;
+			/* automatically switch to best available mode */
+			cx88_set_stereo(core, mode, 0);
+			break;
+		default:
+hw_autodetect:
+			/* stereo autodetection is supported by hardware so
+			   we don't need to do it manually. Do nothing. */
+			break;
+		}
 	}
 
 	dprintk("cx88: tvaudio thread exiting\n");
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index b993d42fe73..0ccac702bea 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -869,6 +869,7 @@ video_poll(struct file *file, struct poll_table_struct *wait)
 {
 	struct cx8800_fh *fh = file->private_data;
 	struct cx88_buffer *buf;
+	unsigned int rc = POLLERR;
 
 	if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) {
 		if (!res_get(fh->dev,fh,RESOURCE_VBI))
@@ -876,22 +877,27 @@ video_poll(struct file *file, struct poll_table_struct *wait)
 		return videobuf_poll_stream(file, &fh->vbiq, wait);
 	}
 
+	mutex_lock(&fh->vidq.vb_lock);
 	if (res_check(fh,RESOURCE_VIDEO)) {
 		/* streaming capture */
 		if (list_empty(&fh->vidq.stream))
-			return POLLERR;
+			goto done;
 		buf = list_entry(fh->vidq.stream.next,struct cx88_buffer,vb.stream);
 	} else {
 		/* read() capture */
 		buf = (struct cx88_buffer*)fh->vidq.read_buf;
 		if (NULL == buf)
-			return POLLERR;
+			goto done;
 	}
 	poll_wait(file, &buf->vb.done, wait);
 	if (buf->vb.state == VIDEOBUF_DONE ||
 	    buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN|POLLRDNORM;
-	return 0;
+		rc = POLLIN|POLLRDNORM;
+	else
+		rc = 0;
+done:
+	mutex_unlock(&fh->vidq.vb_lock);
+	return rc;
 }
 
 static int video_release(struct file *file)
@@ -926,8 +932,10 @@ static int video_release(struct file *file)
 	file->private_data = NULL;
 	kfree(fh);
 
+	mutex_lock(&dev->core->lock);
 	if(atomic_dec_and_test(&dev->core->users))
 		call_all(dev->core, tuner, s_standby);
+	mutex_unlock(&dev->core->lock);
 
 	return 0;
 }
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 7724d168fc0..9d83762163f 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -65,6 +65,8 @@
 #define VBI_LINE_COUNT              17
 #define VBI_LINE_LENGTH           2048
 
+#define AUD_RDS_LINES		     4
+
 /* need "shadow" registers for some write-only ones ... */
 #define SHADOW_AUD_VOL_CTL           1
 #define SHADOW_AUD_BAL_CTL           2
@@ -132,6 +134,7 @@ struct cx88_ctrl {
 #define SRAM_CH25 4   /* audio */
 #define SRAM_CH26 5
 #define SRAM_CH28 6   /* mpeg */
+#define SRAM_CH27 7   /* audio rds */
 /* more */
 
 struct sram_channel {
@@ -232,6 +235,8 @@ extern struct sram_channel cx88_sram_channels[];
 #define CX88_BOARD_TBS_8910                77
 #define CX88_BOARD_PROF_6200               78
 #define CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII 79
+#define CX88_BOARD_HAUPPAUGE_IRONLY        80
+#define CX88_BOARD_WINFAST_DTV1800H        81
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,
@@ -350,6 +355,7 @@ struct cx88_core {
 	u32                        input;
 	u32                        astat;
 	u32			   use_nicam;
+	unsigned long		   last_change;
 
 	/* IR remote control state */
 	struct cx88_IR             *ir;
@@ -652,6 +658,7 @@ extern void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl);
 #define WW_I2SPT	 8
 #define WW_FM		 9
 #define WW_I2SADC	 10
+#define WW_M		 11
 
 void cx88_set_tvaudio(struct cx88_core *core);
 void cx88_newstation(struct cx88_core *core);
@@ -665,6 +672,11 @@ struct cx8802_dev *cx8802_get_device(int minor);
 struct cx8802_driver * cx8802_get_driver(struct cx8802_dev *dev, enum cx88_board_type btype);
 
 /* ----------------------------------------------------------- */
+/* cx88-dsp.c                                                  */
+
+s32 cx88_dsp_detect_stereo_sap(struct cx88_core *core);
+
+/* ----------------------------------------------------------- */
 /* cx88-input.c                                                */
 
 int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci);
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index ba3709bec3f..ec2f45dde16 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -747,8 +747,14 @@ static const struct file_operations dabusb_fops =
 	.release =	dabusb_release,
 };
 
+static char *dabusb_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
 static struct usb_class_driver dabusb_class = {
 	.name =		"dabusb%d",
+	.nodename =	dabusb_nodename,
 	.fops =		&dabusb_fops,
 	.minor_base =	DABUSB_MINOR,
 };
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 0131322475b..7bd8a70f0a0 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -339,6 +339,11 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream)
 	mutex_lock(&dev->lock);
 	dev->adev.users--;
 	em28xx_audio_analog_set(dev);
+	if (substream->runtime->dma_area) {
+		dprintk("freeing\n");
+		vfree(substream->runtime->dma_area);
+		substream->runtime->dma_area = NULL;
+	}
 	mutex_unlock(&dev->lock);
 
 	return 0;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 7c70738479d..00cc791a9e4 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -49,6 +49,11 @@ static unsigned int disable_ir;
 module_param(disable_ir, int, 0444);
 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
 
+static unsigned int disable_usb_speed_check;
+module_param(disable_usb_speed_check, int, 0444);
+MODULE_PARM_DESC(disable_usb_speed_check,
+		 "override min bandwidth requirement of 480M bps");
+
 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
 module_param_array(card,  int, NULL, 0444);
 MODULE_PARM_DESC(card,     "card type");
@@ -104,6 +109,24 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 /* Board  - EM2870 Kworld 355u
    Analog - No input analog */
 
+/* Board - EM2882 Kworld 315U digital */
+static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM28XX_R08_GPIO,	0xfe,	0xff,		10},
+	{EM2880_R04_GPO,	0x04,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x7e,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
+	{EM2880_R04_GPO,	0x08,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		10},
+	{EM2880_R04_GPO,	0x08,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
 static struct em28xx_reg_seq kworld_330u_analog[] = {
 	{EM28XX_R08_GPIO,	0x6d,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x00,	0xff,		10},
@@ -140,6 +163,16 @@ static struct em28xx_reg_seq compro_mute_gpio[] = {
 	{  -1,			-1,		-1,		-1},
 };
 
+/* Terratec AV350 */
+static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
+	{EM28XX_R08_GPIO,	0xff,	0x7f,		10},
+	{	-1,		-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{	-1,		-1,	-1,		-1},
+};
 /*
  *  Board definitions
  */
@@ -992,16 +1025,17 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
-	[EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
-		.name                = "PointNix Intra-Oral Camera",
+	[EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
+		.name                = "EM2860/SAA711X Reference Design",
 		.has_snapshot_button = 1,
-		.tda9887_conf        = TDA9887_PRESENT,
 		.tuner_type          = TUNER_ABSENT,
 		.decoder             = EM28XX_SAA711X,
 		.input               = { {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = EM28XX_AMUX_VIDEO,
+		}, {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
 		} },
 	},
 	[EM2880_BOARD_MSI_DIGIVOX_AD] = {
@@ -1095,6 +1129,63 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = default_analog,
 		} },
 	},
+	[EM2882_BOARD_KWORLD_ATSC_315U] = {
+		.name		= "KWorld ATSC 315U HDTV TV Box",
+		.valid		= EM28XX_BOARD_NOT_VALIDATED,
+		.tuner_type	= TUNER_THOMSON_DTT761X,
+		.tuner_gpio	= em2882_kworld_315u_tuner_gpio,
+		.tda9887_conf	= TDA9887_PRESENT,
+		.decoder	= EM28XX_SAA711X,
+		.has_dvb	= 1,
+		.dvb_gpio	= em2882_kworld_315u_digital,
+		.xclk		= EM28XX_XCLK_FREQUENCY_12MHZ,
+		.i2c_speed	= EM28XX_I2C_CLK_WAIT_ENABLE,
+		/* Analog mode - still not ready */
+		/*.input        = { {
+			.type = EM28XX_VMUX_TELEVISION,
+			.vmux = SAA7115_COMPOSITE2,
+			.amux = EM28XX_AMUX_VIDEO,
+			.gpio = em2882_kworld_315u_analog,
+			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+		}, {
+			.type = EM28XX_VMUX_COMPOSITE1,
+			.vmux = SAA7115_COMPOSITE0,
+			.amux = EM28XX_AMUX_LINE_IN,
+			.gpio = em2882_kworld_315u_analog1,
+			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+		}, {
+			.type = EM28XX_VMUX_SVIDEO,
+			.vmux = SAA7115_SVIDEO3,
+			.amux = EM28XX_AMUX_LINE_IN,
+			.gpio = em2882_kworld_315u_analog1,
+			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+		} }, */
+	},
+	[EM2880_BOARD_EMPIRE_DUAL_TV] = {
+		.name = "Empire dual TV",
+		.tuner_type = TUNER_XC2028,
+		.tuner_gpio = default_tuner_gpio,
+		.has_dvb = 1,
+		.dvb_gpio = default_digital,
+		.mts_firmware = 1,
+		.decoder = EM28XX_TVP5150,
+		.input = { {
+			.type = EM28XX_VMUX_TELEVISION,
+			.vmux = TVP5150_COMPOSITE0,
+			.amux = EM28XX_AMUX_VIDEO,
+			.gpio = default_analog,
+		}, {
+			.type = EM28XX_VMUX_COMPOSITE1,
+			.vmux = TVP5150_COMPOSITE1,
+			.amux = EM28XX_AMUX_LINE_IN,
+			.gpio = default_analog,
+		}, {
+			.type = EM28XX_VMUX_SVIDEO,
+			.vmux = TVP5150_SVIDEO,
+			.amux = EM28XX_AMUX_LINE_IN,
+			.gpio = default_analog,
+		} },
+	},
 	[EM2881_BOARD_DNT_DA2_HYBRID] = {
 		.name         = "DNT DA2 Hybrid",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
@@ -1322,6 +1413,42 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_VIDEO,
 		} },
 	},
+	[EM2860_BOARD_TERRATEC_GRABBY] = {
+		.name            = "Terratec Grabby",
+		.vchannels       = 2,
+		.tuner_type      = TUNER_ABSENT,
+		.decoder         = EM28XX_SAA711X,
+		.xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
+		.input           = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = SAA7115_COMPOSITE0,
+			.amux     = EM28XX_AMUX_VIDEO2,
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = SAA7115_SVIDEO3,
+			.amux     = EM28XX_AMUX_VIDEO2,
+		} },
+	},
+	[EM2860_BOARD_TERRATEC_AV350] = {
+		.name            = "Terratec AV350",
+		.vchannels       = 2,
+		.tuner_type      = TUNER_ABSENT,
+		.decoder         = EM28XX_TVP5150,
+		.xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
+		.mute_gpio       = terratec_av350_mute_gpio,
+		.input           = { {
+			.type     = EM28XX_VMUX_COMPOSITE1,
+			.vmux     = TVP5150_COMPOSITE1,
+			.amux     = EM28XX_AUDIO_SRC_LINE,
+			.gpio     = terratec_av350_unmute_gpio,
+
+		}, {
+			.type     = EM28XX_VMUX_SVIDEO,
+			.vmux     = TVP5150_SVIDEO,
+			.amux     = EM28XX_AUDIO_SRC_LINE,
+			.gpio     = terratec_av350_unmute_gpio,
+		} },
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1355,6 +1482,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2880_BOARD_KWORLD_DVB_305U },
 	{ USB_DEVICE(0xeb1a, 0xe310),
 			.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
+	{ USB_DEVICE(0xeb1a, 0xa313),
+		.driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
 	{ USB_DEVICE(0xeb1a, 0xa316),
 			.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
 	{ USB_DEVICE(0xeb1a, 0xe320),
@@ -1385,6 +1514,10 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2870_BOARD_TERRATEC_XS },
 	{ USB_DEVICE(0x0ccd, 0x0047),
 			.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
+	{ USB_DEVICE(0x0ccd, 0x0084),
+			.driver_info = EM2860_BOARD_TERRATEC_AV350 },
+	{ USB_DEVICE(0x0ccd, 0x0096),
+			.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
 	{ USB_DEVICE(0x185b, 0x2870),
 			.driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
 	{ USB_DEVICE(0x185b, 0x2041),
@@ -1437,13 +1570,14 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
 	{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
 	{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
+	{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
 static struct em28xx_hash_table em28xx_i2c_hash[] = {
 	{0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
 	{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
-	{0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
+	{0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
 	{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
 };
 
@@ -1619,6 +1753,17 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
 		break;
 
+	case EM2882_BOARD_KWORLD_ATSC_315U:
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+		msleep(10);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+		msleep(10);
+		em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
+		msleep(10);
+		em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
+		msleep(10);
+		break;
+
 	case EM2860_BOARD_KAIOMY_TVNPC_U2:
 		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
 		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
@@ -1664,6 +1809,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 	ctl->mts = em28xx_boards[dev->model].mts_firmware;
 
 	switch (dev->model) {
+	case EM2880_BOARD_EMPIRE_DUAL_TV:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
@@ -1835,12 +1981,20 @@ static int em28xx_hint_board(struct em28xx *dev)
 }
 
 /* ----------------------------------------------------------------------- */
-void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
+void em28xx_register_i2c_ir(struct em28xx *dev)
 {
-	if (disable_ir) {
-		ir->get_key = NULL;
-		return ;
-	}
+	struct i2c_board_info info;
+	struct IR_i2c_init_data init_data;
+	const unsigned short addr_list[] = {
+		 0x30, 0x47, I2C_CLIENT_END
+	};
+
+	if (disable_ir)
+		return;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
+	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 
 	/* detect & configure */
 	switch (dev->model) {
@@ -1850,22 +2004,19 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
 		break;
 	case (EM2800_BOARD_TERRATEC_CINERGY_200):
 	case (EM2820_BOARD_TERRATEC_CINERGY_250):
-		ir->ir_codes = ir_codes_em_terratec;
-		ir->get_key = em28xx_get_key_terratec;
-		snprintf(ir->c.name, sizeof(ir->c.name),
-			 "i2c IR (EM28XX Terratec)");
+		init_data.ir_codes = ir_codes_em_terratec;
+		init_data.get_key = em28xx_get_key_terratec;
+		init_data.name = "i2c IR (EM28XX Terratec)";
 		break;
 	case (EM2820_BOARD_PINNACLE_USB_2):
-		ir->ir_codes = ir_codes_pinnacle_grey;
-		ir->get_key = em28xx_get_key_pinnacle_usb_grey;
-		snprintf(ir->c.name, sizeof(ir->c.name),
-			 "i2c IR (EM28XX Pinnacle PCTV)");
+		init_data.ir_codes = ir_codes_pinnacle_grey;
+		init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
+		init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
 		break;
 	case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
-		ir->ir_codes = ir_codes_hauppauge_new;
-		ir->get_key = em28xx_get_key_em_haup;
-		snprintf(ir->c.name, sizeof(ir->c.name),
-			 "i2c IR (EM2840 Hauppauge)");
+		init_data.ir_codes = ir_codes_hauppauge_new;
+		init_data.get_key = em28xx_get_key_em_haup;
+		init_data.name = "i2c IR (EM2840 Hauppauge)";
 		break;
 	case (EM2820_BOARD_MSI_VOX_USB_2):
 		break;
@@ -1876,6 +2027,10 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
 	case (EM2800_BOARD_GRABBEEX_USB2800):
 		break;
 	}
+
+	if (init_data.name)
+		info.platform_data = &init_data;
+	i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
 }
 
 void em28xx_card_setup(struct em28xx *dev)
@@ -1886,6 +2041,9 @@ void em28xx_card_setup(struct em28xx *dev)
 	if (em28xx_boards[dev->model].tuner_addr)
 		dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
 
+	if (em28xx_boards[dev->model].tda9887_conf)
+		dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
+
 	/* request some modules */
 	switch (dev->model) {
 	case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
@@ -1915,6 +2073,12 @@ void em28xx_card_setup(struct em28xx *dev)
 #endif
 		break;
 	}
+	case EM2882_BOARD_KWORLD_ATSC_315U:
+		em28xx_write_reg(dev, 0x0d, 0x42);
+		msleep(10);
+		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+		msleep(10);
+		break;
 	case EM2820_BOARD_KWORLD_PVRTV2800RF:
 		/* GPIO enables sound on KWORLD PVR TV 2800RF */
 		em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
@@ -2279,6 +2443,20 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		ifnum,
 		interface->altsetting->desc.bInterfaceNumber);
 
+	/*
+	 * Make sure we have 480 Mbps of bandwidth, otherwise things like
+	 * video stream wouldn't likely work, since 12 Mbps is generally
+	 * not enough even for most Digital TV streams.
+	 */
+	if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
+		printk(DRIVER_NAME ": Device initialization failed.\n");
+		printk(DRIVER_NAME ": Device must be connected to a high-speed"
+		       " USB 2.0 port.\n");
+		em28xx_devused &= ~(1<<nr);
+		retval = -ENODEV;
+		goto err;
+	}
+
 	if (nr >= EM28XX_MAXBOARDS) {
 		printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
 				EM28XX_MAXBOARDS);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 192b76cdd5d..c8d7ce8fbd3 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -500,18 +500,21 @@ int em28xx_audio_setup(struct em28xx *dev)
 
 	/* See how this device is configured */
 	cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
-	if (cfg < 0)
+	em28xx_info("Config register raw data: 0x%02x\n", cfg);
+	if (cfg < 0) {
+		/* Register read error?  */
 		cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
-	else
-		em28xx_info("Config register raw data: 0x%02x\n", cfg);
-
-	if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
-		    EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
+	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
+		/* The device doesn't have vendor audio at all */
+		dev->has_alsa_audio = 0;
+		dev->audio_mode.has_audio = 0;
+		return 0;
+	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+		   EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
 		em28xx_info("I2S Audio (3 sample rates)\n");
 		dev->audio_mode.i2s_3rates = 1;
-	}
-	if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
-		    EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
+	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+		   EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
 		em28xx_info("I2S Audio (5 sample rates)\n");
 		dev->audio_mode.i2s_5rates = 1;
 	}
@@ -938,7 +941,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 	dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
 					      GFP_KERNEL);
 	if (!dev->isoc_ctl.transfer_buffer) {
-		em28xx_errdev("cannot allocate memory for usbtransfer\n");
+		em28xx_errdev("cannot allocate memory for usb transfer\n");
 		kfree(dev->isoc_ctl.urb);
 		return -ENOMEM;
 	}
@@ -1012,6 +1015,41 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 }
 EXPORT_SYMBOL_GPL(em28xx_init_isoc);
 
+/* Determine the packet size for the DVB stream for the given device
+   (underlying value programmed into the eeprom) */
+int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
+{
+	unsigned int chip_cfg2;
+	unsigned int packet_size = 564;
+
+	if (dev->chip_id == CHIP_ID_EM2874) {
+		/* FIXME - for now assume 564 like it was before, but the
+		   em2874 code should be added to return the proper value... */
+		packet_size = 564;
+	} else {
+		/* TS max packet size stored in bits 1-0 of R01 */
+		chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2);
+		switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) {
+		case EM28XX_CHIPCFG2_TS_PACKETSIZE_188:
+			packet_size = 188;
+			break;
+		case EM28XX_CHIPCFG2_TS_PACKETSIZE_376:
+			packet_size = 376;
+			break;
+		case EM28XX_CHIPCFG2_TS_PACKETSIZE_564:
+			packet_size = 564;
+			break;
+		case EM28XX_CHIPCFG2_TS_PACKETSIZE_752:
+			packet_size = 752;
+			break;
+		}
+	}
+
+	em28xx_coredbg("dvb max packet size=%d\n", packet_size);
+	return packet_size;
+}
+EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize);
+
 /*
  * em28xx_wake_i2c()
  * configure i2c attached devices
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index fcd25511209..563dd2b1c8e 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -25,6 +25,8 @@
 #include "em28xx.h"
 #include <media/v4l2-common.h>
 #include <media/videobuf-vmalloc.h>
+#include <media/tuner.h>
+#include "tuner-simple.h"
 
 #include "lgdt330x.h"
 #include "zl10353.h"
@@ -46,7 +48,6 @@ if (debug >= level) 						\
 } while (0)
 
 #define EM28XX_DVB_NUM_BUFS 5
-#define EM28XX_DVB_MAX_PACKETSIZE 564
 #define EM28XX_DVB_MAX_PACKETS 64
 
 struct em28xx_dvb {
@@ -142,14 +143,17 @@ static int start_streaming(struct em28xx_dvb *dvb)
 {
 	int rc;
 	struct em28xx *dev = dvb->adapter.priv;
+	int max_dvb_packet_size;
 
 	usb_set_interface(dev->udev, 0, 1);
 	rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	if (rc < 0)
 		return rc;
 
+	max_dvb_packet_size = em28xx_isoc_dvb_max_packetsize(dev);
+
 	return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS,
-				EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE,
+				EM28XX_DVB_NUM_BUFS, max_dvb_packet_size,
 				dvb_isoc_copy);
 }
 
@@ -431,6 +435,7 @@ static int dvb_init(struct em28xx *dev)
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 	case EM2880_BOARD_TERRATEC_HYBRID_XS:
 	case EM2880_BOARD_KWORLD_DVB_310U:
+	case EM2880_BOARD_EMPIRE_DUAL_TV:
 		dvb->frontend = dvb_attach(zl10353_attach,
 					   &em28xx_zl10353_with_xc3028,
 					   &dev->i2c_adap);
@@ -448,6 +453,18 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM2882_BOARD_KWORLD_ATSC_315U:
+		dvb->frontend = dvb_attach(lgdt330x_attach,
+					   &em2880_lgdt3303_dev,
+					   &dev->i2c_adap);
+		if (dvb->frontend != NULL) {
+			if (!dvb_attach(simple_tuner_attach, dvb->frontend,
+				&dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) {
+				result = -EINVAL;
+				goto out_free;
+			}
+		}
+		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
 #ifdef EM28XX_DRX397XD_SUPPORT
 		/* We don't have the config structure properly populated, so
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index f0bf1d960c7..2c86fcf089f 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -451,27 +451,6 @@ static u32 functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_SMBUS_EMUL;
 }
 
-/*
- * attach_inform()
- * gets called when a device attaches to the i2c bus
- * does some basic configuration
- */
-static int attach_inform(struct i2c_client *client)
-{
-	struct em28xx *dev = client->adapter->algo_data;
-	struct IR_i2c *ir = i2c_get_clientdata(client);
-
-	switch (client->addr << 1) {
-	case 0x60:
-	case 0x8e:
-		dprintk1(1, "attach_inform: IR detected (%s).\n", ir->phys);
-		em28xx_set_ir(dev, ir);
-		break;
-	}
-
-	return 0;
-}
-
 static struct i2c_algorithm em28xx_algo = {
 	.master_xfer   = em28xx_i2c_xfer,
 	.functionality = functionality,
@@ -482,7 +461,6 @@ static struct i2c_adapter em28xx_adap_template = {
 	.name = "em28xx",
 	.id = I2C_HW_B_EM28XX,
 	.algo = &em28xx_algo,
-	.client_register = attach_inform,
 };
 
 static struct i2c_client em28xx_client_template = {
@@ -575,6 +553,9 @@ int em28xx_i2c_register(struct em28xx *dev)
 	if (i2c_scan)
 		em28xx_do_i2c_scan(dev);
 
+	/* Instantiate the IR receiver device, if present */
+	em28xx_register_i2c_ir(dev);
+
 	return 0;
 }
 
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index a5abfd7a19f..7a0fe3816e3 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -40,7 +40,7 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
 
 #define i2cdprintk(fmt, arg...) \
 	if (ir_debug) { \
-		printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \
+		printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
 	}
 
 #define dprintk(fmt, arg...) \
@@ -85,7 +85,7 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char b;
 
 	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c, &b, 1)) {
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -114,7 +114,7 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char code;
 
 	/* poll IR chip */
-	if (2 != i2c_master_recv(&ir->c, buf, 2))
+	if (2 != i2c_master_recv(ir->c, buf, 2))
 		return -EIO;
 
 	/* Does eliminate repeated parity code */
@@ -147,7 +147,7 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
 
 	/* poll IR chip */
 
-	if (3 != i2c_master_recv(&ir->c, buf, 3)) {
+	if (3 != i2c_master_recv(ir->c, buf, 3)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 24e39c56811..a2676d63cfd 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -27,6 +27,22 @@
 #define EM28XX_CHIPCFG_AC97			0x10
 #define EM28XX_CHIPCFG_AUDIOMASK		0x30
 
+#define EM28XX_R01_CHIPCFG2	0x01
+
+/* em28xx Chip Configuration 2 0x01 */
+#define EM28XX_CHIPCFG2_TS_PRESENT		0x10
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_MASK	0x0c /* bits 3-2 */
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_1MF	0x00
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_2MF	0x04
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_4MF	0x08
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_8MF	0x0c
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK	0x03 /* bits 0-1 */
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_188	0x00
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_376	0x01
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_564	0x02
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752	0x03
+
+
 	/* GPIO/GPO registers */
 #define EM2880_R04_GPO	0x04    /* em2880-em2883 only */
 #define EM28XX_R08_GPIO	0x08	/* em2820 or upper */
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 4c4e58004f5..8bf81be1da6 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -58,7 +58,7 @@
 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950	16
 #define EM2880_BOARD_PINNACLE_PCTV_HD_PRO	17
 #define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2	18
-#define EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA  19
+#define EM2860_BOARD_SAA711X_REFERENCE_DESIGN	19
 #define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600   20
 #define EM2800_BOARD_GRABBEEX_USB2800           21
 #define EM2750_BOARD_UNKNOWN			  22
@@ -102,6 +102,10 @@
 #define EM2860_BOARD_KAIOMY_TVNPC_U2              63
 #define EM2860_BOARD_EASYCAP                      64
 #define EM2820_BOARD_IODATA_GVMVP_SZ		  65
+#define EM2880_BOARD_EMPIRE_DUAL_TV		  66
+#define EM2860_BOARD_TERRATEC_GRABBY		  67
+#define EM2860_BOARD_TERRATEC_AV350		  68
+#define EM2882_BOARD_KWORLD_ATSC_315U		  69
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
@@ -615,6 +619,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 		     int num_bufs, int max_pkt_size,
 		     int (*isoc_copy) (struct em28xx *dev, struct urb *urb));
 void em28xx_uninit_isoc(struct em28xx *dev);
+int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev);
 int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
 int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
 void em28xx_wake_i2c(struct em28xx *dev);
@@ -639,7 +644,7 @@ extern void em28xx_card_setup(struct em28xx *dev);
 extern struct em28xx_board em28xx_boards[];
 extern struct usb_device_id em28xx_id_table[];
 extern const unsigned int em28xx_bcount;
-void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir);
+void em28xx_register_i2c_ir(struct em28xx *dev);
 int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
 void em28xx_release_resources(struct em28xx *dev);
 
diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c
index 00e6863ed66..480ec5c87d0 100644
--- a/drivers/media/video/gspca/finepix.c
+++ b/drivers/media/video/gspca/finepix.c
@@ -168,6 +168,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	cam->cam_mode = fpix_mode;
 	cam->nmodes = 1;
+	cam->bulk = 1;
 	cam->bulk_size = FPIX_MAX_TRANSFER;
 
 	INIT_WORK(&dev->work_struct, dostream);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index a2741d7dccf..f7e0355ad64 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1,7 +1,7 @@
 /*
  * Main USB camera driver
  *
- * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ * Copyright (C) 2008-2009 Jean-Francois Moine (http://moinejf.free.fr)
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -47,7 +47,7 @@ MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("GSPCA USB Camera Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 5, 0)
+#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 6, 0)
 
 #ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE;
@@ -441,7 +441,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
  * look for an input transfer endpoint in an alternate setting
  */
 static struct usb_host_endpoint *alt_xfer(struct usb_host_interface *alt,
-					  __u8 xfer)
+					  int xfer)
 {
 	struct usb_host_endpoint *ep;
 	int i, attr;
@@ -449,7 +449,8 @@ static struct usb_host_endpoint *alt_xfer(struct usb_host_interface *alt,
 	for (i = 0; i < alt->desc.bNumEndpoints; i++) {
 		ep = &alt->endpoint[i];
 		attr = ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-		if (attr == xfer)
+		if (attr == xfer
+		    && ep->desc.wMaxPacketSize != 0)
 			return ep;
 	}
 	return NULL;
@@ -467,37 +468,28 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
 {
 	struct usb_interface *intf;
 	struct usb_host_endpoint *ep;
-	int i, ret;
+	int xfer, i, ret;
 
 	intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
 	ep = NULL;
+	xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK
+				   : USB_ENDPOINT_XFER_ISOC;
 	i = gspca_dev->alt;			/* previous alt setting */
-
-	/* try isoc */
 	while (--i >= 0) {
-		ep = alt_xfer(&intf->altsetting[i],
-				USB_ENDPOINT_XFER_ISOC);
+		ep = alt_xfer(&intf->altsetting[i], xfer);
 		if (ep)
 			break;
 	}
-
-	/* if no isoc, try bulk (alt 0 only) */
 	if (ep == NULL) {
-		ep = alt_xfer(&intf->altsetting[0],
-				USB_ENDPOINT_XFER_BULK);
-		if (ep == NULL) {
-			err("no transfer endpoint found");
-			return NULL;
-		}
-		i = 0;
-		gspca_dev->bulk = 1;
+		err("no transfer endpoint found");
+		return NULL;
 	}
 	PDEBUG(D_STREAM, "use alt %d ep 0x%02x",
 			i, ep->desc.bEndpointAddress);
-	if (i > 0) {
+	if (gspca_dev->nbalt > 1) {
 		ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i);
 		if (ret < 0) {
-			err("set interface err %d", ret);
+			err("set alt %d err %d", i, ret);
 			return NULL;
 		}
 	}
@@ -517,13 +509,13 @@ static int create_urbs(struct gspca_dev *gspca_dev,
 	/* calculate the packet size and the number of packets */
 	psize = le16_to_cpu(ep->desc.wMaxPacketSize);
 
-	if (!gspca_dev->bulk) {			/* isoc */
+	if (!gspca_dev->cam.bulk) {		/* isoc */
 
 		/* See paragraph 5.9 / table 5-11 of the usb 2.0 spec. */
 		psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
-		npkt = ISO_MAX_SIZE / psize;
-		if (npkt > ISO_MAX_PKT)
-			npkt = ISO_MAX_PKT;
+		npkt = gspca_dev->cam.npkt;
+		if (npkt == 0)
+			npkt = 32;		/* default value */
 		bsize = psize * npkt;
 		PDEBUG(D_STREAM,
 			"isoc %d pkts size %d = bsize:%d",
@@ -617,7 +609,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 			goto out;
 
 		/* clear the bulk endpoint */
-		if (gspca_dev->bulk)
+		if (gspca_dev->cam.bulk)
 			usb_clear_halt(gspca_dev->dev,
 					gspca_dev->urb[0]->pipe);
 
@@ -630,7 +622,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 		gspca_dev->streaming = 1;
 
 		/* some bulk transfers are started by the subdriver */
-		if (gspca_dev->bulk && gspca_dev->cam.bulk_nurbs == 0)
+		if (gspca_dev->cam.bulk && gspca_dev->cam.bulk_nurbs == 0)
 			break;
 
 		/* submit the URBs */
@@ -661,6 +653,8 @@ static int gspca_set_alt0(struct gspca_dev *gspca_dev)
 {
 	int ret;
 
+	if (gspca_dev->alt == 0)
+		return 0;
 	ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 0);
 	if (ret < 0)
 		PDEBUG(D_ERR|D_STREAM, "set alt 0 err %d", ret);
@@ -869,6 +863,32 @@ out:
 	return ret;
 }
 
+static int vidioc_enum_framesizes(struct file *file, void *priv,
+				  struct v4l2_frmsizeenum *fsize)
+{
+	struct gspca_dev *gspca_dev = priv;
+	int i;
+	__u32 index = 0;
+
+	for (i = 0; i < gspca_dev->cam.nmodes; i++) {
+		if (fsize->pixel_format !=
+				gspca_dev->cam.cam_mode[i].pixelformat)
+			continue;
+
+		if (fsize->index == index) {
+			fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+			fsize->discrete.width =
+				gspca_dev->cam.cam_mode[i].width;
+			fsize->discrete.height =
+				gspca_dev->cam.cam_mode[i].height;
+			return 0;
+		}
+		index++;
+	}
+
+	return -EINVAL;
+}
+
 static void gspca_release(struct video_device *vfd)
 {
 	struct gspca_dev *gspca_dev = container_of(vfd, struct gspca_dev, vdev);
@@ -989,43 +1009,54 @@ out:
 	return ret;
 }
 
+static const struct ctrl *get_ctrl(struct gspca_dev *gspca_dev,
+				   int id)
+{
+	const struct ctrl *ctrls;
+	int i;
+
+	for (i = 0, ctrls = gspca_dev->sd_desc->ctrls;
+	     i < gspca_dev->sd_desc->nctrls;
+	     i++, ctrls++) {
+		if (gspca_dev->ctrl_dis & (1 << i))
+			continue;
+		if (id == ctrls->qctrl.id)
+			return ctrls;
+	}
+	return NULL;
+}
+
 static int vidioc_queryctrl(struct file *file, void *priv,
 			   struct v4l2_queryctrl *q_ctrl)
 {
 	struct gspca_dev *gspca_dev = priv;
-	int i, ix;
+	const struct ctrl *ctrls;
+	int i;
 	u32 id;
 
-	ix = -1;
+	ctrls = NULL;
 	id = q_ctrl->id;
 	if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
 		id &= V4L2_CTRL_ID_MASK;
 		id++;
 		for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
-			if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
+			if (gspca_dev->ctrl_dis & (1 << i))
 				continue;
-			if (ix < 0) {
-				ix = i;
+			if (ctrls->qctrl.id < id)
 				continue;
+			if (ctrls != NULL) {
+				if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+					    > ctrls->qctrl.id)
+					continue;
 			}
-			if (gspca_dev->sd_desc->ctrls[i].qctrl.id
-				    > gspca_dev->sd_desc->ctrls[ix].qctrl.id)
-				continue;
-			ix = i;
-		}
-	}
-	for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
-		if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) {
-			ix = i;
-			break;
+			ctrls = &gspca_dev->sd_desc->ctrls[i];
 		}
+	} else {
+		ctrls = get_ctrl(gspca_dev, id);
 	}
-	if (ix < 0)
+	if (ctrls == NULL)
 		return -EINVAL;
-	memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl,
-		sizeof *q_ctrl);
-	if (gspca_dev->ctrl_dis & (1 << ix))
-		q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
+	memcpy(q_ctrl, ctrls, sizeof *q_ctrl);
 	return 0;
 }
 
@@ -1034,56 +1065,45 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 {
 	struct gspca_dev *gspca_dev = priv;
 	const struct ctrl *ctrls;
-	int i, ret;
+	int ret;
 
-	for (i = 0, ctrls = gspca_dev->sd_desc->ctrls;
-	     i < gspca_dev->sd_desc->nctrls;
-	     i++, ctrls++) {
-		if (ctrl->id != ctrls->qctrl.id)
-			continue;
-		if (gspca_dev->ctrl_dis & (1 << i))
-			return -EINVAL;
-		if (ctrl->value < ctrls->qctrl.minimum
-		    || ctrl->value > ctrls->qctrl.maximum)
-			return -ERANGE;
-		PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value);
-		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
-			return -ERESTARTSYS;
-		if (gspca_dev->present)
-			ret = ctrls->set(gspca_dev, ctrl->value);
-		else
-			ret = -ENODEV;
-		mutex_unlock(&gspca_dev->usb_lock);
-		return ret;
-	}
-	return -EINVAL;
+	ctrls = get_ctrl(gspca_dev, ctrl->id);
+	if (ctrls == NULL)
+		return -EINVAL;
+
+	if (ctrl->value < ctrls->qctrl.minimum
+	    || ctrl->value > ctrls->qctrl.maximum)
+		return -ERANGE;
+	PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value);
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = ctrls->set(gspca_dev, ctrl->value);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+	return ret;
 }
 
 static int vidioc_g_ctrl(struct file *file, void *priv,
 			 struct v4l2_control *ctrl)
 {
 	struct gspca_dev *gspca_dev = priv;
-
 	const struct ctrl *ctrls;
-	int i, ret;
+	int ret;
 
-	for (i = 0, ctrls = gspca_dev->sd_desc->ctrls;
-	     i < gspca_dev->sd_desc->nctrls;
-	     i++, ctrls++) {
-		if (ctrl->id != ctrls->qctrl.id)
-			continue;
-		if (gspca_dev->ctrl_dis & (1 << i))
-			return -EINVAL;
-		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
-			return -ERESTARTSYS;
-		if (gspca_dev->present)
-			ret = ctrls->get(gspca_dev, &ctrl->value);
-		else
-			ret = -ENODEV;
-		mutex_unlock(&gspca_dev->usb_lock);
-		return ret;
-	}
-	return -EINVAL;
+	ctrls = get_ctrl(gspca_dev, ctrl->id);
+	if (ctrls == NULL)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = ctrls->get(gspca_dev, &ctrl->value);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+	return ret;
 }
 
 /*fixme: have an audio flag in gspca_dev?*/
@@ -1864,6 +1884,7 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = {
 	.vidioc_g_parm		= vidioc_g_parm,
 	.vidioc_s_parm		= vidioc_s_parm,
 	.vidioc_s_std		= vidioc_s_std,
+	.vidioc_enum_framesizes = vidioc_enum_framesizes,
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 	.vidiocgmbuf          = vidiocgmbuf,
 #endif
@@ -1943,7 +1964,7 @@ int gspca_dev_probe(struct usb_interface *intf,
 
 	/* init video stuff */
 	memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template);
-	gspca_dev->vdev.parent = &dev->dev;
+	gspca_dev->vdev.parent = &intf->dev;
 	gspca_dev->module = module;
 	gspca_dev->present = 1;
 	ret = video_register_device(&gspca_dev->vdev,
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 58e8ff02136..bd1faff8864 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -44,8 +44,6 @@ extern int gspca_debug;
 #define GSPCA_MAX_FRAMES 16	/* maximum number of video frame buffers */
 /* image transfers */
 #define MAX_NURBS 4		/* max number of URBs */
-#define ISO_MAX_PKT 32		/* max number of packets in an ISOC transfer */
-#define ISO_MAX_SIZE 0x8000	/* max size of one URB buffer (32 Kb) */
 
 /* device information - set at probe time */
 struct cam {
@@ -56,6 +54,9 @@ struct cam {
 				 * - cannot be > MAX_NURBS
 				 * - when 0 and bulk_size != 0 means
 				 *   1 URB and submit done by subdriver */
+	u8 bulk;		/* image transfer by 0:isoc / 1:bulk */
+	u8 npkt;		/* number of packets in an ISOC message
+				 * 0 is the default value: 32 packets */
 	u32 input_flags;	/* value for ENUM_INPUT status flags */
 };
 
@@ -168,7 +169,6 @@ struct gspca_dev {
 	__u8 iface;			/* USB interface number */
 	__u8 alt;			/* USB alternate setting */
 	__u8 nbalt;			/* number of USB alternate settings */
-	u8 bulk;			/* image transfer by 0:isoc / 1:bulk */
 };
 
 int gspca_dev_probe(struct usb_interface *intf,
diff --git a/drivers/media/video/gspca/m5602/Makefile b/drivers/media/video/gspca/m5602/Makefile
index 9fa3644f486..bf7a19a1e6d 100644
--- a/drivers/media/video/gspca/m5602/Makefile
+++ b/drivers/media/video/gspca/m5602/Makefile
@@ -2,9 +2,10 @@ obj-$(CONFIG_USB_M5602) += gspca_m5602.o
 
 gspca_m5602-objs := m5602_core.o \
 		    m5602_ov9650.o \
+		    m5602_ov7660.o \
 		    m5602_mt9m111.o \
 		    m5602_po1030.o \
 		    m5602_s5k83a.o \
 		    m5602_s5k4aa.o
 
-EXTRA_CFLAGS += -Idrivers/media/video/gspca
\ No newline at end of file
+EXTRA_CFLAGS += -Idrivers/media/video/gspca
diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h
index 8f1cea6fd3b..1127a405c9b 100644
--- a/drivers/media/video/gspca/m5602/m5602_bridge.h
+++ b/drivers/media/video/gspca/m5602/m5602_bridge.h
@@ -45,6 +45,15 @@
 #define M5602_XB_SEN_CLK_DIV		0x15
 #define M5602_XB_AUD_CLK_CTRL		0x16
 #define M5602_XB_AUD_CLK_DIV		0x17
+#define M5602_OB_AC_LINK_STATE		0x22
+#define M5602_OB_PCM_SLOT_INDEX		0x24
+#define M5602_OB_GPIO_SLOT_INDEX	0x25
+#define M5602_OB_ACRX_STATUS_ADDRESS_H	0x28
+#define M5602_OB_ACRX_STATUS_DATA_L	0x29
+#define M5602_OB_ACRX_STATUS_DATA_H	0x2a
+#define M5602_OB_ACTX_COMMAND_ADDRESS	0x31
+#define M5602_OB_ACRX_COMMAND_DATA_L	0x32
+#define M5602_OB_ACTX_COMMAND_DATA_H	0X33
 #define M5602_XB_DEVCTR1		0x41
 #define M5602_XB_EPSETR0		0x42
 #define M5602_XB_EPAFCTR		0x47
@@ -77,7 +86,18 @@
 #define M5602_XB_GPIO_EN_L		0x75
 #define M5602_XB_GPIO_DAT		0x76
 #define M5602_XB_GPIO_DIR		0x77
-#define M5602_XB_MISC_CTL		0x70
+#define M5602_XB_SEN_CLK_CONTROL	0x80
+#define M5602_XB_SEN_CLK_DIVISION	0x81
+#define M5602_XB_CPR_CLK_CONTROL	0x82
+#define M5602_XB_CPR_CLK_DIVISION	0x83
+#define M5602_XB_MCU_CLK_CONTROL	0x84
+#define M5602_XB_MCU_CLK_DIVISION	0x85
+#define M5602_XB_DCT_CLK_CONTROL	0x86
+#define M5602_XB_DCT_CLK_DIVISION	0x87
+#define M5602_XB_EC_CLK_CONTROL		0x88
+#define M5602_XB_EC_CLK_DIVISION	0x89
+#define M5602_XB_LBUF_CLK_CONTROL	0x8a
+#define M5602_XB_LBUF_CLK_DIVISION	0x8b
 
 #define I2C_BUSY 0x80
 
@@ -128,10 +148,10 @@ struct sd {
 };
 
 int m5602_read_bridge(
-	struct sd *sd, u8 address, u8 *i2c_data);
+	struct sd *sd, const u8 address, u8 *i2c_data);
 
 int m5602_write_bridge(
-	struct sd *sd, u8 address, u8 i2c_data);
+	struct sd *sd, const u8 address, const u8 i2c_data);
 
 int m5602_write_sensor(struct sd *sd, const u8 address,
 		       u8 *i2c_data, const u8 len);
diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c
index 1aac2985fee..8a5bba16ff3 100644
--- a/drivers/media/video/gspca/m5602/m5602_core.c
+++ b/drivers/media/video/gspca/m5602/m5602_core.c
@@ -17,6 +17,7 @@
  */
 
 #include "m5602_ov9650.h"
+#include "m5602_ov7660.h"
 #include "m5602_mt9m111.h"
 #include "m5602_po1030.h"
 #include "m5602_s5k83a.h"
@@ -35,7 +36,7 @@ static const __devinitdata struct usb_device_id m5602_table[] = {
 MODULE_DEVICE_TABLE(usb, m5602_table);
 
 /* Reads a byte from the m5602 */
-int m5602_read_bridge(struct sd *sd, u8 address, u8 *i2c_data)
+int m5602_read_bridge(struct sd *sd, const u8 address, u8 *i2c_data)
 {
 	int err;
 	struct usb_device *udev = sd->gspca_dev.dev;
@@ -56,7 +57,7 @@ int m5602_read_bridge(struct sd *sd, u8 address, u8 *i2c_data)
 }
 
 /* Writes a byte to to the m5602 */
-int m5602_write_bridge(struct sd *sd, u8 address, u8 i2c_data)
+int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data)
 {
 	int err;
 	struct usb_device *udev = sd->gspca_dev.dev;
@@ -80,6 +81,17 @@ int m5602_write_bridge(struct sd *sd, u8 address, u8 i2c_data)
 	return (err < 0) ? err : 0;
 }
 
+int m5602_wait_for_i2c(struct sd *sd)
+{
+	int err;
+	u8 data;
+
+	do {
+		err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, &data);
+	} while ((data & I2C_BUSY) && !err);
+	return err;
+}
+
 int m5602_read_sensor(struct sd *sd, const u8 address,
 		       u8 *i2c_data, const u8 len)
 {
@@ -88,9 +100,7 @@ int m5602_read_sensor(struct sd *sd, const u8 address,
 	if (!len || len > sd->sensor->i2c_regW)
 		return -EINVAL;
 
-	do {
-		err = m5602_read_bridge(sd, M5602_XB_I2C_STATUS, i2c_data);
-	} while ((*i2c_data & I2C_BUSY) && !err);
+	err = m5602_wait_for_i2c(sd);
 	if (err < 0)
 		return err;
 
@@ -103,21 +113,25 @@ int m5602_read_sensor(struct sd *sd, const u8 address,
 	if (err < 0)
 		return err;
 
+	/* Sensors with registers that are of only
+	   one byte width are differently read */
+
+	/* FIXME: This works with the ov9650, but has issues with the po1030 */
 	if (sd->sensor->i2c_regW == 1) {
-		err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, len);
+		err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 1);
 		if (err < 0)
 			return err;
 
 		err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x08);
-		if (err < 0)
-			return err;
 	} else {
 		err = m5602_write_bridge(sd, M5602_XB_I2C_CTRL, 0x18 + len);
-		if (err < 0)
-			return err;
 	}
 
 	for (i = 0; (i < len) && !err; i++) {
+		err = m5602_wait_for_i2c(sd);
+		if (err < 0)
+			return err;
+
 		err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i]));
 
 		PDEBUG(D_CONF, "Reading sensor register "
@@ -206,6 +220,11 @@ static int m5602_probe_sensor(struct sd *sd)
 	if (!sd->sensor->probe(sd))
 		return 0;
 
+	/* Try the ov7660 */
+	sd->sensor = &ov7660;
+	if (!sd->sensor->probe(sd))
+		return 0;
+
 	/* Try the s5k83a */
 	sd->sensor = &s5k83a;
 	if (!sd->sensor->probe(sd))
@@ -409,8 +428,9 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 module_param(force_sensor, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(force_sensor,
-		"force detection of sensor, "
-		"1 = OV9650, 2 = S5K83A, 3 = S5K4AA, 4 = MT9M111, 5 = PO1030");
+		"forces detection of a sensor, "
+		"1 = OV9650, 2 = S5K83A, 3 = S5K4AA, "
+		"4 = MT9M111, 5 = PO1030, 6 = OV7660");
 
 module_param(dump_bridge, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup");
diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c
index 7d3f9e348ef..8d071dff694 100644
--- a/drivers/media/video/gspca/m5602/m5602_mt9m111.c
+++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c
@@ -18,6 +18,23 @@
 
 #include "m5602_mt9m111.h"
 
+static int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
+static int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
+static int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int mt9m111_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 val);
+static int mt9m111_get_auto_white_balance(struct gspca_dev *gspca_dev,
+					  __s32 *val);
+static int mt9m111_get_green_balance(struct gspca_dev *gspca_dev, __s32 *val);
+static int mt9m111_set_green_balance(struct gspca_dev *gspca_dev, __s32 val);
+static int mt9m111_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val);
+static int mt9m111_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val);
+static int mt9m111_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val);
+static int mt9m111_set_red_balance(struct gspca_dev *gspca_dev, __s32 val);
+
 static struct v4l2_pix_format mt9m111_modes[] = {
 	{
 		640,
@@ -32,6 +49,7 @@ static struct v4l2_pix_format mt9m111_modes[] = {
 };
 
 const static struct ctrl mt9m111_ctrls[] = {
+#define VFLIP_IDX 0
 	{
 		{
 			.id		= V4L2_CID_VFLIP,
@@ -44,7 +62,9 @@ const static struct ctrl mt9m111_ctrls[] = {
 		},
 		.set = mt9m111_set_vflip,
 		.get = mt9m111_get_vflip
-	}, {
+	},
+#define HFLIP_IDX 1
+	{
 		{
 			.id             = V4L2_CID_HFLIP,
 			.type           = V4L2_CTRL_TYPE_BOOLEAN,
@@ -56,7 +76,9 @@ const static struct ctrl mt9m111_ctrls[] = {
 		},
 		.set = mt9m111_set_hflip,
 		.get = mt9m111_get_hflip
-	}, {
+	},
+#define GAIN_IDX 2
+	{
 		{
 			.id             = V4L2_CID_GAIN,
 			.type           = V4L2_CTRL_TYPE_INTEGER,
@@ -64,21 +86,80 @@ const static struct ctrl mt9m111_ctrls[] = {
 			.minimum        = 0,
 			.maximum        = (INITIAL_MAX_GAIN - 1) * 2 * 2 * 2,
 			.step           = 1,
-			.default_value  = DEFAULT_GAIN,
+			.default_value  = MT9M111_DEFAULT_GAIN,
 			.flags          = V4L2_CTRL_FLAG_SLIDER
 		},
 		.set = mt9m111_set_gain,
 		.get = mt9m111_get_gain
-	}
+	},
+#define AUTO_WHITE_BALANCE_IDX 3
+	{
+		{
+			.id             = V4L2_CID_AUTO_WHITE_BALANCE,
+			.type           = V4L2_CTRL_TYPE_BOOLEAN,
+			.name           = "auto white balance",
+			.minimum        = 0,
+			.maximum        = 1,
+			.step           = 1,
+			.default_value  = 0,
+		},
+		.set = mt9m111_set_auto_white_balance,
+		.get = mt9m111_get_auto_white_balance
+	},
+#define GREEN_BALANCE_IDX 4
+	{
+		{
+			.id 		= M5602_V4L2_CID_GREEN_BALANCE,
+			.type 		= V4L2_CTRL_TYPE_INTEGER,
+			.name 		= "green balance",
+			.minimum 	= 0x00,
+			.maximum 	= 0x7ff,
+			.step 		= 0x1,
+			.default_value 	= MT9M111_GREEN_GAIN_DEFAULT,
+			.flags         	= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = mt9m111_set_green_balance,
+		.get = mt9m111_get_green_balance
+	},
+#define BLUE_BALANCE_IDX 5
+	{
+		{
+			.id 		= V4L2_CID_BLUE_BALANCE,
+			.type 		= V4L2_CTRL_TYPE_INTEGER,
+			.name 		= "blue balance",
+			.minimum 	= 0x00,
+			.maximum 	= 0x7ff,
+			.step 		= 0x1,
+			.default_value 	= MT9M111_BLUE_GAIN_DEFAULT,
+			.flags         	= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = mt9m111_set_blue_balance,
+		.get = mt9m111_get_blue_balance
+	},
+#define RED_BALANCE_IDX 5
+	{
+		{
+			.id 		= V4L2_CID_RED_BALANCE,
+			.type 		= V4L2_CTRL_TYPE_INTEGER,
+			.name 		= "red balance",
+			.minimum 	= 0x00,
+			.maximum 	= 0x7ff,
+			.step 		= 0x1,
+			.default_value 	= MT9M111_RED_GAIN_DEFAULT,
+			.flags         	= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = mt9m111_set_red_balance,
+		.get = mt9m111_get_red_balance
+	},
 };
 
-
 static void mt9m111_dump_registers(struct sd *sd);
 
 int mt9m111_probe(struct sd *sd)
 {
 	u8 data[2] = {0x00, 0x00};
 	int i;
+	s32 *sensor_settings;
 
 	if (force_sensor) {
 		if (force_sensor == MT9M111_SENSOR) {
@@ -117,16 +198,27 @@ int mt9m111_probe(struct sd *sd)
 	return -ENODEV;
 
 sensor_found:
+	sensor_settings = kmalloc(ARRAY_SIZE(mt9m111_ctrls) * sizeof(s32),
+				  GFP_KERNEL);
+	if (!sensor_settings)
+		return -ENOMEM;
+
 	sd->gspca_dev.cam.cam_mode = mt9m111_modes;
 	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(mt9m111_modes);
 	sd->desc->ctrls = mt9m111_ctrls;
 	sd->desc->nctrls = ARRAY_SIZE(mt9m111_ctrls);
+
+	for (i = 0; i < ARRAY_SIZE(mt9m111_ctrls); i++)
+		sensor_settings[i] = mt9m111_ctrls[i].qctrl.default_value;
+	sd->sensor_priv = sensor_settings;
+
 	return 0;
 }
 
 int mt9m111_init(struct sd *sd)
 {
 	int i, err = 0;
+	s32 *sensor_settings = sd->sensor_priv;
 
 	/* Init the sensor */
 	for (i = 0; i < ARRAY_SIZE(init_mt9m111) && !err; i++) {
@@ -147,36 +239,154 @@ int mt9m111_init(struct sd *sd)
 	if (dump_sensor)
 		mt9m111_dump_registers(sd);
 
-	return (err < 0) ? err : 0;
+	err = mt9m111_set_vflip(&sd->gspca_dev, sensor_settings[VFLIP_IDX]);
+	if (err < 0)
+		return err;
+
+	err = mt9m111_set_hflip(&sd->gspca_dev, sensor_settings[HFLIP_IDX]);
+	if (err < 0)
+		return err;
+
+	err = mt9m111_set_green_balance(&sd->gspca_dev,
+					 sensor_settings[GREEN_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = mt9m111_set_blue_balance(&sd->gspca_dev,
+					 sensor_settings[BLUE_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = mt9m111_set_red_balance(&sd->gspca_dev,
+					sensor_settings[RED_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	return mt9m111_set_gain(&sd->gspca_dev, sensor_settings[GAIN_IDX]);
 }
 
-int mt9m111_power_down(struct sd *sd)
+int mt9m111_start(struct sd *sd)
 {
-	return 0;
+	int i, err = 0;
+	u8 data[2];
+	struct cam *cam = &sd->gspca_dev.cam;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	int width = cam->cam_mode[sd->gspca_dev.curr_mode].width - 1;
+	int height = cam->cam_mode[sd->gspca_dev.curr_mode].height;
+
+	for (i = 0; i < ARRAY_SIZE(start_mt9m111) && !err; i++) {
+		if (start_mt9m111[i][0] == BRIDGE) {
+			err = m5602_write_bridge(sd,
+				start_mt9m111[i][1],
+				start_mt9m111[i][2]);
+		} else {
+			data[0] = start_mt9m111[i][2];
+			data[1] = start_mt9m111[i][3];
+			err = m5602_write_sensor(sd,
+				start_mt9m111[i][1], data, 2);
+		}
+	}
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, (height >> 8) & 0xff);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, (height & 0xff));
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < 2 && !err; i++)
+		err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, 0);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 2);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < 2 && !err; i++)
+		err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA, 0);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA,
+				 (width >> 8) & 0xff);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA, width & 0xff);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0);
+	if (err < 0)
+		return err;
+
+	switch (width) {
+	case 640:
+		PDEBUG(D_V4L2, "Configuring camera for VGA mode");
+		data[0] = MT9M111_RMB_OVER_SIZED;
+		data[1] = MT9M111_RMB_ROW_SKIP_2X |
+			  MT9M111_RMB_COLUMN_SKIP_2X |
+			  (sensor_settings[VFLIP_IDX] << 0) |
+			  (sensor_settings[HFLIP_IDX] << 1);
+
+		err = m5602_write_sensor(sd,
+					 MT9M111_SC_R_MODE_CONTEXT_B, data, 2);
+		break;
+
+	case 320:
+		PDEBUG(D_V4L2, "Configuring camera for QVGA mode");
+		data[0] = MT9M111_RMB_OVER_SIZED;
+		data[1] = MT9M111_RMB_ROW_SKIP_4X |
+				MT9M111_RMB_COLUMN_SKIP_4X |
+				(sensor_settings[VFLIP_IDX] << 0) |
+				(sensor_settings[HFLIP_IDX] << 1);
+		err = m5602_write_sensor(sd,
+					 MT9M111_SC_R_MODE_CONTEXT_B, data, 2);
+		break;
+	}
+	return err;
 }
 
-int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
+void mt9m111_disconnect(struct sd *sd)
+{
+	sd->sensor = NULL;
+	kfree(sd->sensor_priv);
+}
+
+static int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
 {
-	int err;
-	u8 data[2] = {0x00, 0x00};
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B,
-				  data, 2);
-	*val = data[0] & MT9M111_RMB_MIRROR_ROWS;
+	*val = sensor_settings[VFLIP_IDX];
 	PDEBUG(D_V4L2, "Read vertical flip %d", *val);
 
-	return err;
+	return 0;
 }
 
-int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
+static int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 data[2] = {0x00, 0x00};
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 
 	PDEBUG(D_V4L2, "Set vertical flip to %d", val);
 
+	sensor_settings[VFLIP_IDX] = val;
+
+	/* The mt9m111 is flipped by default */
+	val = !val;
+
 	/* Set the correct page map */
 	err = m5602_write_sensor(sd, MT9M111_PAGE_MAP, data, 2);
 	if (err < 0)
@@ -186,34 +396,37 @@ int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 	if (err < 0)
 		return err;
 
-	data[0] = (data[0] & 0xfe) | val;
+	data[1] = (data[1] & 0xfe) | val;
 	err = m5602_write_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B,
 				   data, 2);
 	return err;
 }
 
-int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
 {
-	int err;
-	u8 data[2] = {0x00, 0x00};
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B,
-				  data, 2);
-	*val = data[0] & MT9M111_RMB_MIRROR_COLS;
+	*val = sensor_settings[HFLIP_IDX];
 	PDEBUG(D_V4L2, "Read horizontal flip %d", *val);
 
-	return err;
+	return 0;
 }
 
-int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
+static int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 data[2] = {0x00, 0x00};
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 
 	PDEBUG(D_V4L2, "Set horizontal flip to %d", val);
 
+	sensor_settings[HFLIP_IDX] = val;
+
+	/* The mt9m111 is flipped by default */
+	val = !val;
+
 	/* Set the correct page map */
 	err = m5602_write_sensor(sd, MT9M111_PAGE_MAP, data, 2);
 	if (err < 0)
@@ -223,36 +436,62 @@ int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 	if (err < 0)
 		return err;
 
-	data[0] = (data[0] & 0xfd) | ((val << 1) & 0x02);
+	data[1] = (data[1] & 0xfd) | ((val << 1) & 0x02);
 	err = m5602_write_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B,
 					data, 2);
 	return err;
 }
 
-int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+static int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
 {
-	int err, tmp;
-	u8 data[2] = {0x00, 0x00};
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, MT9M111_SC_GLOBAL_GAIN, data, 2);
-	tmp = ((data[1] << 8) | data[0]);
+	*val = sensor_settings[GAIN_IDX];
+	PDEBUG(D_V4L2, "Read gain %d", *val);
 
-	*val = ((tmp & (1 << 10)) * 2) |
-	      ((tmp & (1 <<  9)) * 2) |
-	      ((tmp & (1 <<  8)) * 2) |
-	       (tmp & 0x7f);
+	return 0;
+}
 
-	PDEBUG(D_V4L2, "Read gain %d", *val);
+static int mt9m111_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					  __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+	int err;
+	u8 data[2];
+
+	err = m5602_read_sensor(sd, MT9M111_CP_OPERATING_MODE_CTL, data, 2);
+	if (err < 0)
+		return err;
+
+	sensor_settings[AUTO_WHITE_BALANCE_IDX] = val & 0x01;
+	data[1] = ((data[1] & 0xfd) | ((val & 0x01) << 1));
 
+	err = m5602_write_sensor(sd, MT9M111_CP_OPERATING_MODE_CTL, data, 2);
+
+	PDEBUG(D_V4L2, "Set auto white balance %d", val);
 	return err;
 }
 
-int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+static int mt9m111_get_auto_white_balance(struct gspca_dev *gspca_dev,
+					  __s32 *val) {
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[AUTO_WHITE_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read auto white balance %d", *val);
+	return 0;
+}
+
+static int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err, tmp;
 	u8 data[2] = {0x00, 0x00};
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[GAIN_IDX] = val;
 
 	/* Set the correct page map */
 	err = m5602_write_sensor(sd, MT9M111_PAGE_MAP, data, 2);
@@ -275,8 +514,8 @@ int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 	else
 		tmp = val;
 
-	data[1] = (tmp & 0xff00) >> 8;
-	data[0] = (tmp & 0xff);
+	data[1] = (tmp & 0xff);
+	data[0] = (tmp & 0xff00) >> 8;
 	PDEBUG(D_V4L2, "tmp=%d, data[1]=%d, data[0]=%d", tmp,
 	       data[1], data[0]);
 
@@ -286,6 +525,89 @@ int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
+static int mt9m111_set_green_balance(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 data[2];
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[GREEN_BALANCE_IDX] = val;
+	data[1] = (val & 0xff);
+	data[0] = (val & 0xff00) >> 8;
+
+	PDEBUG(D_V4L2, "Set green balance %d", val);
+	err = m5602_write_sensor(sd, MT9M111_SC_GREEN_1_GAIN,
+				 data, 2);
+	if (err < 0)
+		return err;
+
+	return m5602_write_sensor(sd, MT9M111_SC_GREEN_2_GAIN,
+				  data, 2);
+}
+
+static int mt9m111_get_green_balance(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[GREEN_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read green balance %d", *val);
+	return 0;
+}
+
+static int mt9m111_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
+{
+	u8 data[2];
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[BLUE_BALANCE_IDX] = val;
+	data[1] = (val & 0xff);
+	data[0] = (val & 0xff00) >> 8;
+
+	PDEBUG(D_V4L2, "Set blue balance %d", val);
+
+	return m5602_write_sensor(sd, MT9M111_SC_BLUE_GAIN,
+				  data, 2);
+}
+
+static int mt9m111_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[BLUE_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read blue balance %d", *val);
+	return 0;
+}
+
+static int mt9m111_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
+{
+	u8 data[2];
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	sensor_settings[RED_BALANCE_IDX] = val;
+	data[1] = (val & 0xff);
+	data[0] = (val & 0xff00) >> 8;
+
+	PDEBUG(D_V4L2, "Set red balance %d", val);
+
+	return m5602_write_sensor(sd, MT9M111_SC_RED_GAIN,
+				  data, 2);
+}
+
+static int mt9m111_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[RED_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read red balance %d", *val);
+	return 0;
+}
+
 static void mt9m111_dump_registers(struct sd *sd)
 {
 	u8 address, value[2] = {0x00, 0x00};
diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/video/gspca/m5602/m5602_mt9m111.h
index 00c6db02bdb..b3de7782309 100644
--- a/drivers/media/video/gspca/m5602/m5602_mt9m111.h
+++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.h
@@ -37,7 +37,6 @@
 #define MT9M111_SC_VBLANK_CONTEXT_A		0x08
 #define MT9M111_SC_SHUTTER_WIDTH		0x09
 #define MT9M111_SC_ROW_SPEED			0x0a
-
 #define MT9M111_SC_EXTRA_DELAY			0x0b
 #define MT9M111_SC_SHUTTER_DELAY		0x0c
 #define MT9M111_SC_RESET			0x0d
@@ -50,9 +49,6 @@
 #define MT9M111_SC_GREEN_2_GAIN			0x2e
 #define MT9M111_SC_GLOBAL_GAIN			0x2f
 
-#define MT9M111_RMB_MIRROR_ROWS			(1 << 0)
-#define MT9M111_RMB_MIRROR_COLS			(1 << 1)
-
 #define MT9M111_CONTEXT_CONTROL			0xc8
 #define MT9M111_PAGE_MAP			0xf0
 #define MT9M111_BYTEWISE_ADDRESS		0xf1
@@ -74,8 +70,37 @@
 #define MT9M111_COLORPIPE			0x01
 #define MT9M111_CAMERA_CONTROL			0x02
 
+#define MT9M111_RESET 				(1 << 0)
+#define MT9M111_RESTART				(1 << 1)
+#define MT9M111_ANALOG_STANDBY			(1 << 2)
+#define MT9M111_CHIP_ENABLE			(1 << 3)
+#define MT9M111_CHIP_DISABLE			(0 << 3)
+#define MT9M111_OUTPUT_DISABLE			(1 << 4)
+#define MT9M111_SHOW_BAD_FRAMES			(1 << 0)
+#define MT9M111_RESTART_BAD_FRAMES		(1 << 1)
+#define MT9M111_SYNCHRONIZE_CHANGES		(1 << 7)
+
+#define MT9M111_RMB_OVER_SIZED			(1 << 0)
+#define MT9M111_RMB_MIRROR_ROWS			(1 << 0)
+#define MT9M111_RMB_MIRROR_COLS			(1 << 1)
+#define MT9M111_RMB_ROW_SKIP_2X			(1 << 2)
+#define MT9M111_RMB_COLUMN_SKIP_2X		(1 << 3)
+#define MT9M111_RMB_ROW_SKIP_4X			(1 << 4)
+#define MT9M111_RMB_COLUMN_SKIP_4X		(1 << 5)
+
+#define MT9M111_COLOR_MATRIX_BYPASS		(1 << 4)
+#define MT9M111_SEL_CONTEXT_B			(1 << 3)
+
+#define MT9M111_TRISTATE_PIN_IN_STANDBY		(1 << 1)
+#define MT9M111_SOC_SOFT_STANDBY		(1 << 0)
+
+#define MT9M111_2D_DEFECT_CORRECTION_ENABLE	(1 << 0)
+
 #define INITIAL_MAX_GAIN			64
-#define DEFAULT_GAIN 				283
+#define MT9M111_DEFAULT_GAIN 			283
+#define MT9M111_GREEN_GAIN_DEFAULT		0x20
+#define MT9M111_BLUE_GAIN_DEFAULT		0x20
+#define MT9M111_RED_GAIN_DEFAULT		0x20
 
 /*****************************************************************************/
 
@@ -85,16 +110,10 @@ extern int dump_sensor;
 
 int mt9m111_probe(struct sd *sd);
 int mt9m111_init(struct sd *sd);
-int mt9m111_power_down(struct sd *sd);
+int mt9m111_start(struct sd *sd);
+void mt9m111_disconnect(struct sd *sd);
 
-int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
-int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
-int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
-int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
-int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
-int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val);
-
-const static struct m5602_sensor mt9m111 = {
+static const struct m5602_sensor mt9m111 = {
 	.name = "MT9M111",
 
 	.i2c_slave_id = 0xba,
@@ -102,7 +121,8 @@ const static struct m5602_sensor mt9m111 = {
 
 	.probe = mt9m111_probe,
 	.init = mt9m111_init,
-	.power_down = mt9m111_power_down
+	.disconnect = mt9m111_disconnect,
+	.start = mt9m111_start,
 };
 
 static const unsigned char preinit_mt9m111[][4] =
@@ -117,7 +137,14 @@ static const unsigned char preinit_mt9m111[][4] =
 	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
 
 	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0xff, 0xf7},
+	{SENSOR, MT9M111_SC_RESET,
+		MT9M111_RESET |
+		MT9M111_RESTART |
+		MT9M111_ANALOG_STANDBY |
+		MT9M111_CHIP_DISABLE,
+		MT9M111_SHOW_BAD_FRAMES |
+		MT9M111_RESTART_BAD_FRAMES |
+		MT9M111_SYNCHRONIZE_CHANGES},
 
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00},
@@ -145,731 +172,42 @@ static const unsigned char init_mt9m111[][4] =
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
 	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
 	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0xff, 0xff},
-	{SENSOR, MT9M111_SC_RESET, 0xff, 0xff},
-	{SENSOR, MT9M111_SC_RESET, 0xff, 0xde},
-	{SENSOR, MT9M111_SC_RESET, 0xff, 0xff},
-	{SENSOR, MT9M111_SC_RESET, 0xff, 0xf7},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
 
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00},
-
-	{SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0xff, 0xff},
-
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00},
 	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
 	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00},
-
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x05},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10},
-	{SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00},
-	{SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00},
-	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00},
-	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00},
-
-	{SENSOR, 0xcd, 0x00, 0x0e},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00},
-	{SENSOR, 0xd0, 0x00, 0x40},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02},
-	{SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-	{SENSOR, 0x33, 0x03, 0x49},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-
-	{SENSOR, 0x33, 0x03, 0x49},
-	{SENSOR, 0x34, 0xc0, 0x19},
-	{SENSOR, 0x3f, 0x20, 0x20},
-	{SENSOR, 0x40, 0x20, 0x20},
-	{SENSOR, 0x5a, 0xc0, 0x0a},
-	{SENSOR, 0x70, 0x7b, 0x0a},
-	{SENSOR, 0x71, 0xff, 0x00},
-	{SENSOR, 0x72, 0x19, 0x0e},
-	{SENSOR, 0x73, 0x18, 0x0f},
-	{SENSOR, 0x74, 0x57, 0x32},
-	{SENSOR, 0x75, 0x56, 0x34},
-	{SENSOR, 0x76, 0x73, 0x35},
-	{SENSOR, 0x77, 0x30, 0x12},
-	{SENSOR, 0x78, 0x79, 0x02},
-	{SENSOR, 0x79, 0x75, 0x06},
-	{SENSOR, 0x7a, 0x77, 0x0a},
-	{SENSOR, 0x7b, 0x78, 0x09},
-	{SENSOR, 0x7c, 0x7d, 0x06},
-	{SENSOR, 0x7d, 0x31, 0x10},
-	{SENSOR, 0x7e, 0x00, 0x7e},
-	{SENSOR, 0x80, 0x59, 0x04},
-	{SENSOR, 0x81, 0x59, 0x04},
-	{SENSOR, 0x82, 0x57, 0x0a},
-	{SENSOR, 0x83, 0x58, 0x0b},
-	{SENSOR, 0x84, 0x47, 0x0c},
-	{SENSOR, 0x85, 0x48, 0x0e},
-	{SENSOR, 0x86, 0x5b, 0x02},
-	{SENSOR, 0x87, 0x00, 0x5c},
-	{SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08},
-	{SENSOR, 0x60, 0x00, 0x80},
-	{SENSOR, 0x61, 0x00, 0x00},
-	{SENSOR, 0x62, 0x00, 0x00},
-	{SENSOR, 0x63, 0x00, 0x00},
-	{SENSOR, 0x64, 0x00, 0x00},
-
-	{SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d},
-	{SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18},
-	{SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04},
-	{SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03},
-	{SENSOR, 0x30, 0x04, 0x00},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4},
-	{SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x09},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x0c},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x04},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00},
-	{SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00},
-
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x05},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10},
-	{SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00},
-	{SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00},
-	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00},
-	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00},
-
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00},
-	{SENSOR, 0xcd, 0x00, 0x0e},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00},
-	{SENSOR, 0xd0, 0x00, 0x40},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02},
-	{SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-	{SENSOR, 0x33, 0x03, 0x49},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-
-	{SENSOR, 0x33, 0x03, 0x49},
-	{SENSOR, 0x34, 0xc0, 0x19},
-	{SENSOR, 0x3f, 0x20, 0x20},
-	{SENSOR, 0x40, 0x20, 0x20},
-	{SENSOR, 0x5a, 0xc0, 0x0a},
-	{SENSOR, 0x70, 0x7b, 0x0a},
-	{SENSOR, 0x71, 0xff, 0x00},
-	{SENSOR, 0x72, 0x19, 0x0e},
-	{SENSOR, 0x73, 0x18, 0x0f},
-	{SENSOR, 0x74, 0x57, 0x32},
-	{SENSOR, 0x75, 0x56, 0x34},
-	{SENSOR, 0x76, 0x73, 0x35},
-	{SENSOR, 0x77, 0x30, 0x12},
-	{SENSOR, 0x78, 0x79, 0x02},
-	{SENSOR, 0x79, 0x75, 0x06},
-	{SENSOR, 0x7a, 0x77, 0x0a},
-	{SENSOR, 0x7b, 0x78, 0x09},
-	{SENSOR, 0x7c, 0x7d, 0x06},
-	{SENSOR, 0x7d, 0x31, 0x10},
-	{SENSOR, 0x7e, 0x00, 0x7e},
-	{SENSOR, 0x80, 0x59, 0x04},
-	{SENSOR, 0x81, 0x59, 0x04},
-	{SENSOR, 0x82, 0x57, 0x0a},
-	{SENSOR, 0x83, 0x58, 0x0b},
-	{SENSOR, 0x84, 0x47, 0x0c},
-	{SENSOR, 0x85, 0x48, 0x0e},
-	{SENSOR, 0x86, 0x5b, 0x02},
-	{SENSOR, 0x87, 0x00, 0x5c},
-	{SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08},
-	{SENSOR, 0x60, 0x00, 0x80},
-	{SENSOR, 0x61, 0x00, 0x00},
-	{SENSOR, 0x62, 0x00, 0x00},
-	{SENSOR, 0x63, 0x00, 0x00},
-	{SENSOR, 0x64, 0x00, 0x00},
-
-	{SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d},
-	{SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18},
-	{SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04},
-	{SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03},
-	{SENSOR, 0x30, 0x04, 0x00},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4},
-	{SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x09},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x0c},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x04},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00},
-	{SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
 	{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00},
 
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x05},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
 	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
 	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
 	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
 	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10},
+	{SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00,
+			MT9M111_CP_OPERATING_MODE_CTL},
 	{SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01},
+	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00,
+				MT9M111_2D_DEFECT_CORRECTION_ENABLE},
+	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00,
+				MT9M111_2D_DEFECT_CORRECTION_ENABLE},
 	{SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00},
 	{SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00},
 	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00},
 	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00},
-
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00},
 	{SENSOR, 0xcd, 0x00, 0x0e},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00},
 	{SENSOR, 0xd0, 0x00, 0x40},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02},
-	{SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-	{SENSOR, 0x33, 0x03, 0x49},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-
-	{SENSOR, 0x33, 0x03, 0x49},
-	{SENSOR, 0x34, 0xc0, 0x19},
-	{SENSOR, 0x3f, 0x20, 0x20},
-	{SENSOR, 0x40, 0x20, 0x20},
-	{SENSOR, 0x5a, 0xc0, 0x0a},
-	{SENSOR, 0x70, 0x7b, 0x0a},
-	{SENSOR, 0x71, 0xff, 0x00},
-	{SENSOR, 0x72, 0x19, 0x0e},
-	{SENSOR, 0x73, 0x18, 0x0f},
-	{SENSOR, 0x74, 0x57, 0x32},
-	{SENSOR, 0x75, 0x56, 0x34},
-	{SENSOR, 0x76, 0x73, 0x35},
-	{SENSOR, 0x77, 0x30, 0x12},
-	{SENSOR, 0x78, 0x79, 0x02},
-	{SENSOR, 0x79, 0x75, 0x06},
-	{SENSOR, 0x7a, 0x77, 0x0a},
-	{SENSOR, 0x7b, 0x78, 0x09},
-	{SENSOR, 0x7c, 0x7d, 0x06},
-	{SENSOR, 0x7d, 0x31, 0x10},
-	{SENSOR, 0x7e, 0x00, 0x7e},
-	{SENSOR, 0x80, 0x59, 0x04},
-	{SENSOR, 0x81, 0x59, 0x04},
-	{SENSOR, 0x82, 0x57, 0x0a},
-	{SENSOR, 0x83, 0x58, 0x0b},
-	{SENSOR, 0x84, 0x47, 0x0c},
-	{SENSOR, 0x85, 0x48, 0x0e},
-	{SENSOR, 0x86, 0x5b, 0x02},
-	{SENSOR, 0x87, 0x00, 0x5c},
-	{SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08},
-	{SENSOR, 0x60, 0x00, 0x80},
-	{SENSOR, 0x61, 0x00, 0x00},
-	{SENSOR, 0x62, 0x00, 0x00},
-	{SENSOR, 0x63, 0x00, 0x00},
-	{SENSOR, 0x64, 0x00, 0x00},
 
-	{SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d},
-	{SENSOR, MT9M111_SC_COLSTART, 0x00, 0x18},
-	{SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x04},
-	{SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x08},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x38},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x38},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x03},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x03},
-	{SENSOR, 0x30, 0x04, 0x00},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x07, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0xf4},
-	{SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xea},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x09},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x0c},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x04},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x05},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10},
-	{SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00},
-	{SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00},
-	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00},
-	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00},
-
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, 0xcd, 0x00, 0x0e},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, 0xd0, 0x00, 0x40},
 	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02},
 	{SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
 	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, 0x33, 0x03, 0x49},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-
-	{SENSOR, 0x33, 0x03, 0x49},
-	{SENSOR, 0x34, 0xc0, 0x19},
-	{SENSOR, 0x3f, 0x20, 0x20},
-	{SENSOR, 0x40, 0x20, 0x20},
-	{SENSOR, 0x5a, 0xc0, 0x0a},
-	{SENSOR, 0x70, 0x7b, 0x0a},
-	{SENSOR, 0x71, 0xff, 0x00},
-	{SENSOR, 0x72, 0x19, 0x0e},
-	{SENSOR, 0x73, 0x18, 0x0f},
-	{SENSOR, 0x74, 0x57, 0x32},
-	{SENSOR, 0x75, 0x56, 0x34},
-	{SENSOR, 0x76, 0x73, 0x35},
-	{SENSOR, 0x77, 0x30, 0x12},
-	{SENSOR, 0x78, 0x79, 0x02},
-	{SENSOR, 0x79, 0x75, 0x06},
-	{SENSOR, 0x7a, 0x77, 0x0a},
-	{SENSOR, 0x7b, 0x78, 0x09},
-	{SENSOR, 0x7c, 0x7d, 0x06},
-	{SENSOR, 0x7d, 0x31, 0x10},
-	{SENSOR, 0x7e, 0x00, 0x7e},
-	{SENSOR, 0x80, 0x59, 0x04},
-	{SENSOR, 0x81, 0x59, 0x04},
-	{SENSOR, 0x82, 0x57, 0x0a},
-	{SENSOR, 0x83, 0x58, 0x0b},
-	{SENSOR, 0x84, 0x47, 0x0c},
-	{SENSOR, 0x85, 0x48, 0x0e},
-	{SENSOR, 0x86, 0x5b, 0x02},
-	{SENSOR, 0x87, 0x00, 0x5c},
-	{SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08},
-	{SENSOR, 0x60, 0x00, 0x80},
-	{SENSOR, 0x61, 0x00, 0x00},
-	{SENSOR, 0x62, 0x00, 0x00},
-	{SENSOR, 0x63, 0x00, 0x00},
-	{SENSOR, 0x64, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d},
-	{SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12},
-	{SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00},
-	{SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x0f},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f},
-	{SENSOR, 0x30, 0x04, 0x00},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe3, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90},
-	{SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x00, 0xe6},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x09},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x0c},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x04},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xb3, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_CP_GLOBAL_CLK_CONTROL, 0x00, 0x03},
 
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x3e, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x3e, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x07, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x0b, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a, 0x00},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x05},
 	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x29},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x0d, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_SC_RESET, 0x00, 0x08},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_OPERATING_MODE_CTL, 0x00, 0x10},
-	{SENSOR, MT9M111_CP_LENS_CORRECTION_1, 0x04, 0x2a},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_A, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_DEFECT_CORR_CONTEXT_B, 0x00, 0x01},
-	{SENSOR, MT9M111_CP_LUMA_OFFSET, 0x00, 0x00},
-	{SENSOR, MT9M111_CP_LUMA_CLIP, 0xff, 0x00},
-	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A, 0x14, 0x00},
-	{SENSOR, MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B, 0x14, 0x00},
-
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xcd, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, 0xcd, 0x00, 0x0e},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0xd0, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, 0xd0, 0x00, 0x40},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x02},
-	{SENSOR, MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x07},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x28, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, MT9M111_CC_AWB_PARAMETER_7, 0xef, 0x03},
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-	{SENSOR, 0x33, 0x03, 0x49},
-	{BRIDGE, M5602_XB_I2C_DEV_ADDR, 0xba, 0x00},
-	{BRIDGE, M5602_XB_I2C_REG_ADDR, 0x33, 0x00},
-	{BRIDGE, M5602_XB_I2C_CTRL, 0x1a, 0x00},
-
 	{SENSOR, 0x33, 0x03, 0x49},
 	{SENSOR, 0x34, 0xc0, 0x19},
 	{SENSOR, 0x3f, 0x20, 0x20},
@@ -898,25 +236,29 @@ static const unsigned char init_mt9m111[][4] =
 	{SENSOR, 0x85, 0x48, 0x0e},
 	{SENSOR, 0x86, 0x5b, 0x02},
 	{SENSOR, 0x87, 0x00, 0x5c},
-	{SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, 0x08},
+	{SENSOR, MT9M111_CONTEXT_CONTROL, 0x00, MT9M111_SEL_CONTEXT_B},
 	{SENSOR, 0x60, 0x00, 0x80},
 	{SENSOR, 0x61, 0x00, 0x00},
 	{SENSOR, 0x62, 0x00, 0x00},
 	{SENSOR, 0x63, 0x00, 0x00},
 	{SENSOR, 0x64, 0x00, 0x00},
 
-	{SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d},
-	{SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12},
-	{SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00},
-	{SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60},
-	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_B, 0x01, 0x0f},
-	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f},
+	{SENSOR, MT9M111_SC_ROWSTART, 0x00, 0x0d}, /* 13 */
+	{SENSOR, MT9M111_SC_COLSTART, 0x00, 0x12}, /* 18 */
+	{SENSOR, MT9M111_SC_WINDOW_HEIGHT, 0x04, 0x00}, /* 1024 */
+	{SENSOR, MT9M111_SC_WINDOW_WIDTH, 0x05, 0x10}, /* 1296 */
+	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_B, 0x01, 0x60}, /* 352 */
+	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_B, 0x00, 0x11}, /* 17 */
+	{SENSOR, MT9M111_SC_HBLANK_CONTEXT_A, 0x01, 0x60}, /* 352 */
+	{SENSOR, MT9M111_SC_VBLANK_CONTEXT_A, 0x00, 0x11}, /* 17 */
+	{SENSOR, MT9M111_SC_R_MODE_CONTEXT_A, 0x01, 0x0f}, /* 271 */
 	{SENSOR, 0x30, 0x04, 0x00},
+	/* Set number of blank rows chosen to 400 */
+	{SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90},
+};
 
+static const unsigned char start_mt9m111[][4] =
+{
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
 	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
@@ -928,25 +270,6 @@ static const unsigned char init_mt9m111[][4] =
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe0, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, /* 639*/
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{SENSOR, MT9M111_PAGE_MAP, 0x00, 0x00},
-	/* Set number of blank rows chosen to 400 */
-	{SENSOR, MT9M111_SC_SHUTTER_WIDTH, 0x01, 0x90},
-	/* Set the global gain to 283 (of 512) */
-	{SENSOR, MT9M111_SC_GLOBAL_GAIN, 0x03, 0x63}
 };
 
 #endif
diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
new file mode 100644
index 00000000000..7aafeb7cfa0
--- /dev/null
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -0,0 +1,227 @@
+/*
+ * Driver for the ov7660 sensor
+ *
+ * Copyright (C) 2009 Erik Andrén
+ * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
+ * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
+ *
+ * Portions of code to USB interface and ALi driver software,
+ * Copyright (c) 2006 Willem Duinker
+ * v4l2 interface modeled after the V4L2 driver
+ * for SN9C10x PC Camera Controllers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include "m5602_ov7660.h"
+
+static int ov7660_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+
+const static struct ctrl ov7660_ctrls[] = {
+#define GAIN_IDX 1
+	{
+		{
+			.id		= V4L2_CID_GAIN,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "gain",
+			.minimum	= 0x00,
+			.maximum	= 0xff,
+			.step		= 0x1,
+			.default_value	= OV7660_DEFAULT_GAIN,
+			.flags		= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = ov7660_set_gain,
+		.get = ov7660_get_gain
+	},
+};
+
+static struct v4l2_pix_format ov7660_modes[] = {
+	{
+		640,
+		480,
+		V4L2_PIX_FMT_SBGGR8,
+		V4L2_FIELD_NONE,
+		.sizeimage =
+			640 * 480,
+		.bytesperline = 640,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	}
+};
+
+static void ov7660_dump_registers(struct sd *sd);
+
+int ov7660_probe(struct sd *sd)
+{
+	int err = 0, i;
+	u8 prod_id = 0, ver_id = 0;
+
+	s32 *sensor_settings;
+
+	if (force_sensor) {
+		if (force_sensor == OV7660_SENSOR) {
+			info("Forcing an %s sensor", ov7660.name);
+			goto sensor_found;
+		}
+		/* If we want to force another sensor,
+		don't try to probe this one */
+		return -ENODEV;
+	}
+
+	/* Do the preinit */
+	for (i = 0; i < ARRAY_SIZE(preinit_ov7660) && !err; i++) {
+		u8 data[2];
+
+		if (preinit_ov7660[i][0] == BRIDGE) {
+			err = m5602_write_bridge(sd,
+				preinit_ov7660[i][1],
+				preinit_ov7660[i][2]);
+		} else {
+			data[0] = preinit_ov7660[i][2];
+			err = m5602_write_sensor(sd,
+				preinit_ov7660[i][1], data, 1);
+		}
+	}
+	if (err < 0)
+		return err;
+
+	if (m5602_read_sensor(sd, OV7660_PID, &prod_id, 1))
+		return -ENODEV;
+
+	if (m5602_read_sensor(sd, OV7660_VER, &ver_id, 1))
+		return -ENODEV;
+
+	info("Sensor reported 0x%x%x", prod_id, ver_id);
+
+	if ((prod_id == 0x76) && (ver_id == 0x60)) {
+		info("Detected a ov7660 sensor");
+		goto sensor_found;
+	}
+	return -ENODEV;
+
+sensor_found:
+	sensor_settings = kmalloc(
+		ARRAY_SIZE(ov7660_ctrls) * sizeof(s32), GFP_KERNEL);
+	if (!sensor_settings)
+		return -ENOMEM;
+
+	sd->gspca_dev.cam.cam_mode = ov7660_modes;
+	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(ov7660_modes);
+	sd->desc->ctrls = ov7660_ctrls;
+	sd->desc->nctrls = ARRAY_SIZE(ov7660_ctrls);
+
+	for (i = 0; i < ARRAY_SIZE(ov7660_ctrls); i++)
+		sensor_settings[i] = ov7660_ctrls[i].qctrl.default_value;
+	sd->sensor_priv = sensor_settings;
+
+	return 0;
+}
+
+int ov7660_init(struct sd *sd)
+{
+	int i, err = 0;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	/* Init the sensor */
+	for (i = 0; i < ARRAY_SIZE(init_ov7660); i++) {
+		u8 data[2];
+
+		if (init_ov7660[i][0] == BRIDGE) {
+			err = m5602_write_bridge(sd,
+				init_ov7660[i][1],
+				init_ov7660[i][2]);
+		} else {
+			data[0] = init_ov7660[i][2];
+			err = m5602_write_sensor(sd,
+					init_ov7660[i][1], data, 1);
+		}
+	}
+
+	if (dump_sensor)
+		ov7660_dump_registers(sd);
+
+	err = ov7660_set_gain(&sd->gspca_dev, sensor_settings[GAIN_IDX]);
+	if (err < 0)
+		return err;
+
+	return err;
+}
+
+int ov7660_start(struct sd *sd)
+{
+	return 0;
+}
+
+int ov7660_stop(struct sd *sd)
+{
+	return 0;
+}
+
+void ov7660_disconnect(struct sd *sd)
+{
+	ov7660_stop(sd);
+
+	sd->sensor = NULL;
+	kfree(sd->sensor_priv);
+}
+
+static int ov7660_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[GAIN_IDX];
+	PDEBUG(D_V4L2, "Read gain %d", *val);
+	return 0;
+}
+
+static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	PDEBUG(D_V4L2, "Setting gain to %d", val);
+
+	sensor_settings[GAIN_IDX] = val;
+
+	err = m5602_write_sensor(sd, OV7660_GAIN, &i2c_data, 1);
+	return err;
+}
+
+static void ov7660_dump_registers(struct sd *sd)
+{
+	int address;
+	info("Dumping the ov7660 register state");
+	for (address = 0; address < 0xa9; address++) {
+		u8 value;
+		m5602_read_sensor(sd, address, &value, 1);
+		info("register 0x%x contains 0x%x",
+		     address, value);
+	}
+
+	info("ov7660 register state dump complete");
+
+	info("Probing for which registers that are read/write");
+	for (address = 0; address < 0xff; address++) {
+		u8 old_value, ctrl_value;
+		u8 test_value[2] = {0xff, 0xff};
+
+		m5602_read_sensor(sd, address, &old_value, 1);
+		m5602_write_sensor(sd, address, test_value, 1);
+		m5602_read_sensor(sd, address, &ctrl_value, 1);
+
+		if (ctrl_value == test_value[0])
+			info("register 0x%x is writeable", address);
+		else
+			info("register 0x%x is read only", address);
+
+		/* Restore original value */
+		m5602_write_sensor(sd, address, &old_value, 1);
+	}
+}
diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
new file mode 100644
index 00000000000..3f2c169a93e
--- /dev/null
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -0,0 +1,279 @@
+/*
+ * Driver for the ov7660 sensor
+ *
+ * Copyright (C) 2009 Erik Andrén
+ * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
+ * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
+ *
+ * Portions of code to USB interface and ALi driver software,
+ * Copyright (c) 2006 Willem Duinker
+ * v4l2 interface modeled after the V4L2 driver
+ * for SN9C10x PC Camera Controllers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ */
+
+#ifndef M5602_OV7660_H_
+#define M5602_OV7660_H_
+
+#include "m5602_sensor.h"
+
+#define OV7660_GAIN		0x00
+#define OV7660_BLUE_GAIN	0x01
+#define OV7660_RED_GAIN		0x02
+#define OV7660_VREF		0x03
+#define OV7660_COM1		0x04
+#define OV7660_BAVE		0x05
+#define OV7660_GEAVE		0x06
+#define OV7660_AECHH		0x07
+#define OV7660_RAVE		0x08
+#define OV7660_COM2		0x09
+#define OV7660_PID		0x0a
+#define OV7660_VER		0x0b
+#define OV7660_COM3		0x0c
+#define OV7660_COM4		0x0d
+#define OV7660_COM5		0x0e
+#define OV7660_COM6		0x0f
+#define OV7660_AECH		0x10
+#define OV7660_CLKRC		0x11
+#define OV7660_COM7		0x12
+#define OV7660_COM8		0x13
+#define OV7660_COM9		0x14
+#define OV7660_COM10		0x15
+#define OV7660_RSVD16		0x16
+#define OV7660_HSTART		0x17
+#define OV7660_HSTOP		0x18
+#define OV7660_VSTART		0x19
+#define OV7660_VSTOP		0x1a
+#define OV7660_PSHFT		0x1b
+#define OV7660_MIDH		0x1c
+#define OV7660_MIDL		0x1d
+#define OV7660_MVFP		0x1e
+#define OV7660_LAEC		0x1f
+#define OV7660_BOS		0x20
+#define OV7660_GBOS		0x21
+#define OV7660_GROS		0x22
+#define OV7660_ROS		0x23
+#define OV7660_AEW		0x24
+#define OV7660_AEB		0x25
+#define OV7660_VPT		0x26
+#define OV7660_BBIAS		0x27
+#define OV7660_GbBIAS		0x28
+#define OV7660_RSVD29		0x29
+#define OV7660_RBIAS		0x2c
+#define OV7660_HREF		0x32
+#define OV7660_ADC		0x37
+#define OV7660_OFON 		0x39
+#define OV7660_TSLB 		0x3a
+#define OV7660_COM12 		0x3c
+#define OV7660_COM13 		0x3d
+#define OV7660_LCC1		0x62
+#define OV7660_LCC2		0x63
+#define OV7660_LCC3		0x64
+#define OV7660_LCC4		0x65
+#define OV7660_LCC5		0x66
+#define OV7660_HV 		0x69
+#define OV7660_RSVDA1 		0xa1
+
+#define OV7660_DEFAULT_GAIN		0x0e
+#define OV7660_DEFAULT_RED_GAIN	0x80
+#define OV7660_DEFAULT_BLUE_GAIN 	0x80
+#define OV7660_DEFAULT_SATURATION	0x00
+#define OV7660_DEFAULT_EXPOSURE	0x20
+
+/* Kernel module parameters */
+extern int force_sensor;
+extern int dump_sensor;
+
+int ov7660_probe(struct sd *sd);
+int ov7660_init(struct sd *sd);
+int ov7660_start(struct sd *sd);
+int ov7660_stop(struct sd *sd);
+void ov7660_disconnect(struct sd *sd);
+
+const static struct m5602_sensor ov7660 = {
+	.name = "ov7660",
+	.i2c_slave_id = 0x42,
+	.i2c_regW = 1,
+	.probe = ov7660_probe,
+	.init = ov7660_init,
+	.start = ov7660_start,
+	.stop = ov7660_stop,
+	.disconnect = ov7660_disconnect,
+};
+
+static const unsigned char preinit_ov7660[][4] =
+{
+	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
+	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d},
+	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x03},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x03},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+
+	{SENSOR, OV7660_OFON, 0x0c},
+	{SENSOR, OV7660_COM2, 0x11},
+	{SENSOR, OV7660_COM7, 0x05},
+
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00}
+};
+
+static const unsigned char init_ov7660[][4] =
+{
+	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
+	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d},
+	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x03},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x03},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+
+	{SENSOR, OV7660_OFON, 0x0c},
+	{SENSOR, OV7660_COM2, 0x11},
+	{SENSOR, OV7660_COM7, 0x05},
+
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x02},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+
+	{SENSOR, OV7660_AECH, OV7660_DEFAULT_EXPOSURE},
+	{SENSOR, OV7660_COM1, 0x00},
+
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+
+	{SENSOR, OV7660_COM7, 0x80},
+	{SENSOR, OV7660_CLKRC, 0x80},
+	{SENSOR, OV7660_BLUE_GAIN, 0x80},
+	{SENSOR, OV7660_RED_GAIN, 0x80},
+	{SENSOR, OV7660_COM9, 0x4c},
+	{SENSOR, OV7660_OFON, 0x43},
+	{SENSOR, OV7660_COM12, 0x28},
+	{SENSOR, OV7660_COM8, 0x00},
+	{SENSOR, OV7660_COM10, 0x40},
+	{SENSOR, OV7660_HSTART, 0x0c},
+	{SENSOR, OV7660_HSTOP, 0x61},
+	{SENSOR, OV7660_HREF, 0xa4},
+	{SENSOR, OV7660_PSHFT, 0x0b},
+	{SENSOR, OV7660_VSTART, 0x01},
+	{SENSOR, OV7660_VSTOP, 0x7a},
+	{SENSOR, OV7660_VREF, 0x00},
+	{SENSOR, OV7660_COM7, 0x05},
+	{SENSOR, OV7660_COM6, 0x4b},
+	{SENSOR, OV7660_BBIAS, 0x98},
+	{SENSOR, OV7660_GbBIAS, 0x98},
+	{SENSOR, OV7660_RSVD29, 0x98},
+	{SENSOR, OV7660_RBIAS, 0x98},
+	{SENSOR, OV7660_COM1, 0x00},
+	{SENSOR, OV7660_AECH, 0x00},
+	{SENSOR, OV7660_AECHH, 0x00},
+	{SENSOR, OV7660_ADC, 0x04},
+	{SENSOR, OV7660_COM13, 0x00},
+	{SENSOR, OV7660_RSVDA1, 0x23},
+	{SENSOR, OV7660_TSLB, 0x0d},
+	{SENSOR, OV7660_HV, 0x80},
+	{SENSOR, OV7660_LCC1, 0x00},
+	{SENSOR, OV7660_LCC2, 0x00},
+	{SENSOR, OV7660_LCC3, 0x10},
+	{SENSOR, OV7660_LCC4, 0x40},
+	{SENSOR, OV7660_LCC5, 0x01},
+
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
+	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
+	{BRIDGE, M5602_XB_SIG_INI, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x08},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe0}, /* 480 */
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x02},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x27}, /* 39 */
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x02},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0xa7}, /* 679 */
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+
+	{SENSOR, OV7660_AECH, 0x20},
+	{SENSOR, OV7660_COM1, 0x00},
+	{SENSOR, OV7660_OFON, 0x0c},
+	{SENSOR, OV7660_COM2, 0x11},
+	{SENSOR, OV7660_COM7, 0x05},
+	{SENSOR, OV7660_BLUE_GAIN, 0x80},
+	{SENSOR, OV7660_RED_GAIN, 0x80},
+
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}
+};
+
+#endif
diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c
index fc4548fd441..c2739d6605a 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov9650.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c
@@ -18,44 +18,87 @@
 
 #include "m5602_ov9650.h"
 
+static int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
+static int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val);
+static int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val);
+static int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
+static int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
+static int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 *val);
+static int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 val);
+static int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int ov9650_get_auto_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov9650_set_auto_exposure(struct gspca_dev *gspca_dev, __s32 val);
+
 /* Vertically and horizontally flips the image if matched, needed for machines
    where the sensor is mounted upside down */
 static
     const
 	struct dmi_system_id ov9650_flip_dmi_table[] = {
 	{
-		.ident = "ASUS A6VC",
+		.ident = "ASUS A6Ja",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6VC")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6J")
 		}
 	},
 	{
-		.ident = "ASUS A6VM",
+		.ident = "ASUS A6JC",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6VM")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6JC")
 		}
 	},
 	{
-		.ident = "ASUS A6JC",
+		.ident = "ASUS A6K",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6JC")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6K")
 		}
 	},
 	{
-		.ident = "ASUS A6Ja",
+		.ident = "ASUS A6Kt",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6J")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt")
 		}
 	},
 	{
-		.ident = "ASUS A6Kt",
+		.ident = "ASUS A6VA",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt")
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6VA")
+		}
+	},
+	{
+
+		.ident = "ASUS A6VC",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6VC")
+		}
+	},
+	{
+		.ident = "ASUS A6VM",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A6VM")
+		}
+	},
+	{
+		.ident = "ASUS A7V",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A7V")
 		}
 	},
 	{
@@ -68,7 +111,7 @@ static
 	{}
 };
 
-const static struct ctrl ov9650_ctrls[] = {
+static const struct ctrl ov9650_ctrls[] = {
 #define EXPOSURE_IDX 0
 	{
 		{
@@ -102,6 +145,7 @@ const static struct ctrl ov9650_ctrls[] = {
 #define RED_BALANCE_IDX 2
 	{
 		{
+			.id		= V4L2_CID_RED_BALANCE,
 			.type 		= V4L2_CTRL_TYPE_INTEGER,
 			.name 		= "red balance",
 			.minimum 	= 0x00,
@@ -116,6 +160,7 @@ const static struct ctrl ov9650_ctrls[] = {
 #define BLUE_BALANCE_IDX 3
 	{
 		{
+			.id		= V4L2_CID_BLUE_BALANCE,
 			.type 		= V4L2_CTRL_TYPE_INTEGER,
 			.name 		= "blue balance",
 			.minimum 	= 0x00,
@@ -182,7 +227,22 @@ const static struct ctrl ov9650_ctrls[] = {
 		},
 		.set = ov9650_set_auto_gain,
 		.get = ov9650_get_auto_gain
+	},
+#define AUTO_EXPOSURE_IDX 8
+	{
+		{
+			.id 		= V4L2_CID_EXPOSURE_AUTO,
+			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name 		= "auto exposure",
+			.minimum 	= 0,
+			.maximum 	= 1,
+			.step 		= 1,
+			.default_value 	= 1
+		},
+		.set = ov9650_set_auto_exposure,
+		.get = ov9650_get_auto_exposure
 	}
+
 };
 
 static struct v4l2_pix_format ov9650_modes[] = {
@@ -289,12 +349,6 @@ sensor_found:
 	for (i = 0; i < ARRAY_SIZE(ov9650_ctrls); i++)
 		sensor_settings[i] = ov9650_ctrls[i].qctrl.default_value;
 	sd->sensor_priv = sensor_settings;
-
-	if (dmi_check_system(ov9650_flip_dmi_table) && !err) {
-		info("vflip quirk active");
-		sensor_settings[VFLIP_IDX] = 1;
-	}
-
 	return 0;
 }
 
@@ -316,7 +370,8 @@ int ov9650_init(struct sd *sd)
 			err = m5602_write_bridge(sd, init_ov9650[i][1], data);
 	}
 
-	err = ov9650_set_exposure(&sd->gspca_dev, sensor_settings[EXPOSURE_IDX]);
+	err = ov9650_set_exposure(&sd->gspca_dev,
+				   sensor_settings[EXPOSURE_IDX]);
 	if (err < 0)
 		return err;
 
@@ -324,11 +379,13 @@ int ov9650_init(struct sd *sd)
 	if (err < 0)
 		return err;
 
-	err = ov9650_set_red_balance(&sd->gspca_dev, sensor_settings[RED_BALANCE_IDX]);
+	err = ov9650_set_red_balance(&sd->gspca_dev,
+				      sensor_settings[RED_BALANCE_IDX]);
 	if (err < 0)
 		return err;
 
-	err = ov9650_set_blue_balance(&sd->gspca_dev, sensor_settings[BLUE_BALANCE_IDX]);
+	err = ov9650_set_blue_balance(&sd->gspca_dev,
+				       sensor_settings[BLUE_BALANCE_IDX]);
 	if (err < 0)
 		return err;
 
@@ -340,11 +397,18 @@ int ov9650_init(struct sd *sd)
 	if (err < 0)
 		return err;
 
-	err = ov9650_set_auto_white_balance(&sd->gspca_dev, sensor_settings[AUTO_WHITE_BALANCE_IDX]);
+	err = ov9650_set_auto_exposure(&sd->gspca_dev,
+				sensor_settings[AUTO_EXPOSURE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = ov9650_set_auto_white_balance(&sd->gspca_dev,
+				sensor_settings[AUTO_WHITE_BALANCE_IDX]);
 	if (err < 0)
 		return err;
 
-	err = ov9650_set_auto_gain(&sd->gspca_dev, sensor_settings[AUTO_GAIN_CTRL_IDX]);
+	err = ov9650_set_auto_gain(&sd->gspca_dev,
+				sensor_settings[AUTO_GAIN_CTRL_IDX]);
 	return err;
 }
 
@@ -360,7 +424,10 @@ int ov9650_start(struct sd *sd)
 	int ver_offs = cam->cam_mode[sd->gspca_dev.curr_mode].priv;
 	int hor_offs = OV9650_LEFT_OFFSET;
 
-	if (sensor_settings[VFLIP_IDX])
+	if ((!dmi_check_system(ov9650_flip_dmi_table) &&
+		sensor_settings[VFLIP_IDX]) ||
+		(dmi_check_system(ov9650_flip_dmi_table) &&
+		!sensor_settings[VFLIP_IDX]))
 		ver_offs--;
 
 	if (width <= 320)
@@ -406,6 +473,14 @@ int ov9650_start(struct sd *sd)
 	if (err < 0)
 		return err;
 
+	err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 2);
+	if (err < 0)
+		return err;
+
 	err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA,
 				 (hor_offs >> 8) & 0xff);
 	if (err < 0)
@@ -425,6 +500,10 @@ int ov9650_start(struct sd *sd)
 	if (err < 0)
 		return err;
 
+	err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0);
+	if (err < 0)
+		return err;
+
 	switch (width) {
 	case 640:
 		PDEBUG(D_V4L2, "Configuring camera for VGA mode");
@@ -467,32 +546,15 @@ int ov9650_stop(struct sd *sd)
 	return m5602_write_sensor(sd, OV9650_COM2, &data, 1);
 }
 
-int ov9650_power_down(struct sd *sd)
-{
-	int i, err = 0;
-	for (i = 0; i < ARRAY_SIZE(power_down_ov9650) && !err; i++) {
-		u8 data = power_down_ov9650[i][2];
-		if (power_down_ov9650[i][0] == SENSOR)
-			err = m5602_write_sensor(sd,
-					    power_down_ov9650[i][1], &data, 1);
-		else
-			err = m5602_write_bridge(sd, power_down_ov9650[i][1],
-						 data);
-	}
-
-	return err;
-}
-
 void ov9650_disconnect(struct sd *sd)
 {
 	ov9650_stop(sd);
-	ov9650_power_down(sd);
 
 	sd->sensor = NULL;
 	kfree(sd->sensor_priv);
 }
 
-int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -502,7 +564,7 @@ int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -532,7 +594,7 @@ int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -542,7 +604,7 @@ int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 i2c_data;
@@ -573,7 +635,7 @@ int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -583,7 +645,7 @@ int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 i2c_data;
@@ -599,7 +661,7 @@ int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -610,7 +672,7 @@ int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 i2c_data;
@@ -626,7 +688,7 @@ int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -636,7 +698,7 @@ int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 i2c_data;
@@ -646,13 +708,20 @@ int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 	PDEBUG(D_V4L2, "Set horizontal flip to %d", val);
 
 	sensor_settings[HFLIP_IDX] = val;
-	i2c_data = ((val & 0x01) << 5) | (sensor_settings[VFLIP_IDX] << 4);
+
+	if (!dmi_check_system(ov9650_flip_dmi_table))
+		i2c_data = ((val & 0x01) << 5) |
+				(sensor_settings[VFLIP_IDX] << 4);
+	else
+		i2c_data = ((val & 0x01) << 5) |
+				(!sensor_settings[VFLIP_IDX] << 4);
+
 	err = m5602_write_sensor(sd, OV9650_MVFP, &i2c_data, 1);
 
 	return err;
 }
 
-int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -663,7 +732,7 @@ int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 i2c_data;
@@ -673,6 +742,9 @@ int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 	PDEBUG(D_V4L2, "Set vertical flip to %d", val);
 	sensor_settings[VFLIP_IDX] = val;
 
+	if (dmi_check_system(ov9650_flip_dmi_table))
+		val = !val;
+
 	i2c_data = ((val & 0x01) << 4) | (sensor_settings[VFLIP_IDX] << 5);
 	err = m5602_write_sensor(sd, OV9650_MVFP, &i2c_data, 1);
 	if (err < 0)
@@ -685,48 +757,38 @@ int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_auto_exposure(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
 
-	*val = sensor_settings[GAIN_IDX];
-	PDEBUG(D_V4L2, "Read gain %d", *val);
-
+	*val = sensor_settings[AUTO_EXPOSURE_IDX];
+	PDEBUG(D_V4L2, "Read auto exposure control %d", *val);
 	return 0;
 }
 
-int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_auto_exposure(struct gspca_dev *gspca_dev,
+				    __s32 val)
 {
 	int err;
 	u8 i2c_data;
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
 
-	PDEBUG(D_V4L2, "Set gain to %d", val);
-
-	sensor_settings[GAIN_IDX] = val;
+	PDEBUG(D_V4L2, "Set auto exposure control to %d", val);
 
-	/* Read the OV9650_VREF register first to avoid
-		corrupting the VREF high and low bits */
-	err = m5602_read_sensor(sd, OV9650_VREF, &i2c_data, 1);
-	if (err < 0)
-		return err;
-
-	/* Mask away all uninteresting bits */
-	i2c_data = ((val & 0x0300) >> 2) | (i2c_data & 0x3F);
-	err = m5602_write_sensor(sd, OV9650_VREF, &i2c_data, 1);
+	sensor_settings[AUTO_EXPOSURE_IDX] = val;
+	err = m5602_read_sensor(sd, OV9650_COM8, &i2c_data, 1);
 	if (err < 0)
 		return err;
 
-	/* The 8 LSBs */
-	i2c_data = val & 0xff;
-	err = m5602_write_sensor(sd, OV9650_GAIN, &i2c_data, 1);
+	i2c_data = ((i2c_data & 0xfe) | ((val & 0x01) << 0));
 
-	return err;
+	return m5602_write_sensor(sd, OV9650_COM8, &i2c_data, 1);
 }
 
-int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -735,7 +797,8 @@ int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 val)
 {
 	int err;
 	u8 i2c_data;
@@ -755,7 +818,7 @@ int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val)
+static int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	s32 *sensor_settings = sd->sensor_priv;
@@ -765,7 +828,7 @@ int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val)
+static int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 i2c_data;
@@ -780,9 +843,8 @@ int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val)
 		return err;
 
 	i2c_data = ((i2c_data & 0xfb) | ((val & 0x01) << 2));
-	err = m5602_write_sensor(sd, OV9650_COM8, &i2c_data, 1);
 
-	return err;
+	return m5602_write_sensor(sd, OV9650_COM8, &i2c_data, 1);
 }
 
 static void ov9650_dump_registers(struct sd *sd)
diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h
index fcc54e4c0f4..c98c40d69e0 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov9650.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h
@@ -120,6 +120,10 @@
 #define OV9650_SOFT_SLEEP		(1 << 4)
 #define OV9650_OUTPUT_DRIVE_2X		(1 << 0)
 
+#define OV9650_DENOISE_ENABLE		(1 << 5)
+#define OV9650_WHITE_PIXEL_ENABLE	(1 << 1)
+#define OV9650_WHITE_PIXEL_OPTION	(1 << 0)
+
 #define OV9650_LEFT_OFFSET		0x62
 
 #define GAIN_DEFAULT			0x14
@@ -137,29 +141,9 @@ int ov9650_probe(struct sd *sd);
 int ov9650_init(struct sd *sd);
 int ov9650_start(struct sd *sd);
 int ov9650_stop(struct sd *sd);
-int ov9650_power_down(struct sd *sd);
 void ov9650_disconnect(struct sd *sd);
 
-int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
-int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val);
-int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val);
-int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val);
-int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
-int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
-int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
-int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val);
-int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val);
-int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val);
-
-const static struct m5602_sensor ov9650 = {
+static const struct m5602_sensor ov9650 = {
 	.name = "OV9650",
 	.i2c_slave_id = 0x60,
 	.i2c_regW = 1,
@@ -167,7 +151,6 @@ const static struct m5602_sensor ov9650 = {
 	.init = ov9650_init,
 	.start = ov9650_start,
 	.stop = ov9650_stop,
-	.power_down = ov9650_power_down,
 	.disconnect = ov9650_disconnect,
 };
 
@@ -219,7 +202,7 @@ static const unsigned char init_ov9650[][3] =
 	/* Reset chip */
 	{SENSOR, OV9650_COM7, OV9650_REGISTER_RESET},
 	/* One extra reset is needed in order to make the sensor behave
-	   properly when resuming from ram */
+	   properly when resuming from ram, could be a timing issue */
 	{SENSOR, OV9650_COM7, OV9650_REGISTER_RESET},
 
 	/* Enable double clock */
@@ -229,8 +212,7 @@ static const unsigned char init_ov9650[][3] =
 
 	/* Set fast AGC/AEC algorithm with unlimited step size */
 	{SENSOR, OV9650_COM8, OV9650_FAST_AGC_AEC |
-			      OV9650_AEC_UNLIM_STEP_SIZE |
-			      OV9650_AWB_EN | OV9650_AGC_EN},
+			      OV9650_AEC_UNLIM_STEP_SIZE},
 
 	{SENSOR, OV9650_CHLF, 0x10},
 	{SENSOR, OV9650_ARBLM, 0xbf},
@@ -301,8 +283,11 @@ static const unsigned char init_ov9650[][3] =
 	{SENSOR, OV9650_VREF, 0x10},
 	{SENSOR, OV9650_ADC, 0x04},
 	{SENSOR, OV9650_HV, 0x40},
+
 	/* Enable denoise, and white-pixel erase */
-	{SENSOR, OV9650_COM22, 0x23},
+	{SENSOR, OV9650_COM22, OV9650_DENOISE_ENABLE |
+		 OV9650_WHITE_PIXEL_ENABLE |
+		 OV9650_WHITE_PIXEL_OPTION},
 
 	/* Enable VARIOPIXEL */
 	{SENSOR, OV9650_COM3, OV9650_VARIOPIXEL},
@@ -312,26 +297,6 @@ static const unsigned char init_ov9650[][3] =
 	{SENSOR, OV9650_COM2, OV9650_SOFT_SLEEP | OV9650_OUTPUT_DRIVE_2X},
 };
 
-static const unsigned char power_down_ov9650[][3] =
-{
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{SENSOR, OV9650_COM7, 0x80},
-	{SENSOR, OV9650_OFON, 0xf4},
-	{SENSOR, OV9650_MVFP, 0x80},
-	{SENSOR, OV9650_DBLV, 0x3f},
-	{SENSOR, OV9650_RSVD36, 0x49},
-	{SENSOR, OV9650_COM7, 0x05},
-
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-};
-
 static const unsigned char res_init_ov9650[][3] =
 {
 	{SENSOR, OV9650_COM2, OV9650_OUTPUT_DRIVE_2X},
diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c
index eaddf488bad..8d74d8065b7 100644
--- a/drivers/media/video/gspca/m5602/m5602_po1030.c
+++ b/drivers/media/video/gspca/m5602/m5602_po1030.c
@@ -18,6 +18,29 @@
 
 #include "m5602_po1030.h"
 
+static int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
+static int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val);
+static int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val);
+static int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val);
+static int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val);
+static int po1030_get_green_balance(struct gspca_dev *gspca_dev, __s32 *val);
+static int po1030_set_green_balance(struct gspca_dev *gspca_dev, __s32 val);
+static int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
+static int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
+static int po1030_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 val);
+static int po1030_get_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 *val);
+static int po1030_set_auto_exposure(struct gspca_dev *gspca_dev,
+					 __s32 val);
+static int po1030_get_auto_exposure(struct gspca_dev *gspca_dev,
+					 __s32 *val);
+
 static struct v4l2_pix_format po1030_modes[] = {
 	{
 		640,
@@ -27,11 +50,12 @@ static struct v4l2_pix_format po1030_modes[] = {
 		.sizeimage = 640 * 480,
 		.bytesperline = 640,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0
+		.priv = 2
 	}
 };
 
-const static struct ctrl po1030_ctrls[] = {
+static const struct ctrl po1030_ctrls[] = {
+#define GAIN_IDX 0
 	{
 		{
 			.id 		= V4L2_CID_GAIN,
@@ -45,7 +69,9 @@ const static struct ctrl po1030_ctrls[] = {
 		},
 		.set = po1030_set_gain,
 		.get = po1030_get_gain
-	}, {
+	},
+#define EXPOSURE_IDX 1
+	{
 		{
 			.id 		= V4L2_CID_EXPOSURE,
 			.type 		= V4L2_CTRL_TYPE_INTEGER,
@@ -58,7 +84,9 @@ const static struct ctrl po1030_ctrls[] = {
 		},
 		.set = po1030_set_exposure,
 		.get = po1030_get_exposure
-	}, {
+	},
+#define RED_BALANCE_IDX 2
+	{
 		{
 			.id 		= V4L2_CID_RED_BALANCE,
 			.type 		= V4L2_CTRL_TYPE_INTEGER,
@@ -71,7 +99,9 @@ const static struct ctrl po1030_ctrls[] = {
 		},
 		.set = po1030_set_red_balance,
 		.get = po1030_get_red_balance
-	}, {
+	},
+#define BLUE_BALANCE_IDX 3
+	{
 		{
 			.id 		= V4L2_CID_BLUE_BALANCE,
 			.type 		= V4L2_CTRL_TYPE_INTEGER,
@@ -84,7 +114,9 @@ const static struct ctrl po1030_ctrls[] = {
 		},
 		.set = po1030_set_blue_balance,
 		.get = po1030_get_blue_balance
-	}, {
+	},
+#define HFLIP_IDX 4
+	{
 		{
 			.id 		= V4L2_CID_HFLIP,
 			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
@@ -96,7 +128,9 @@ const static struct ctrl po1030_ctrls[] = {
 		},
 		.set = po1030_set_hflip,
 		.get = po1030_get_hflip
-	}, {
+	},
+#define VFLIP_IDX 5
+	{
 		{
 			.id 		= V4L2_CID_VFLIP,
 			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
@@ -108,14 +142,58 @@ const static struct ctrl po1030_ctrls[] = {
 		},
 		.set = po1030_set_vflip,
 		.get = po1030_get_vflip
-	}
+	},
+#define AUTO_WHITE_BALANCE_IDX 6
+	{
+		{
+			.id 		= V4L2_CID_AUTO_WHITE_BALANCE,
+			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name 		= "auto white balance",
+			.minimum 	= 0,
+			.maximum 	= 1,
+			.step 		= 1,
+			.default_value 	= 0,
+		},
+		.set = po1030_set_auto_white_balance,
+		.get = po1030_get_auto_white_balance
+	},
+#define AUTO_EXPOSURE_IDX 7
+	{
+		{
+			.id 		= V4L2_CID_EXPOSURE_AUTO,
+			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name 		= "auto exposure",
+			.minimum 	= 0,
+			.maximum 	= 1,
+			.step 		= 1,
+			.default_value 	= 0,
+		},
+		.set = po1030_set_auto_exposure,
+		.get = po1030_get_auto_exposure
+	},
+#define GREEN_BALANCE_IDX 8
+	{
+		{
+			.id 		= M5602_V4L2_CID_GREEN_BALANCE,
+			.type 		= V4L2_CTRL_TYPE_INTEGER,
+			.name 		= "green balance",
+			.minimum 	= 0x00,
+			.maximum 	= 0xff,
+			.step 		= 0x1,
+			.default_value 	= PO1030_GREEN_GAIN_DEFAULT,
+			.flags         	= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = po1030_set_green_balance,
+		.get = po1030_get_green_balance
+	},
 };
 
 static void po1030_dump_registers(struct sd *sd);
 
 int po1030_probe(struct sd *sd)
 {
-	u8 prod_id = 0, ver_id = 0, i;
+	u8 dev_id_h = 0, i;
+	s32 *sensor_settings;
 
 	if (force_sensor) {
 		if (force_sensor == PO1030_SENSOR) {
@@ -139,28 +217,36 @@ int po1030_probe(struct sd *sd)
 			m5602_write_bridge(sd, preinit_po1030[i][1], data);
 	}
 
-	if (m5602_read_sensor(sd, 0x3, &prod_id, 1))
+	if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))
 		return -ENODEV;
 
-	if (m5602_read_sensor(sd, 0x4, &ver_id, 1))
-		return -ENODEV;
-
-	if ((prod_id == 0x02) && (ver_id == 0xef)) {
+	if (dev_id_h == 0x30) {
 		info("Detected a po1030 sensor");
 		goto sensor_found;
 	}
 	return -ENODEV;
 
 sensor_found:
+	sensor_settings = kmalloc(
+		ARRAY_SIZE(po1030_ctrls) * sizeof(s32), GFP_KERNEL);
+	if (!sensor_settings)
+		return -ENOMEM;
+
 	sd->gspca_dev.cam.cam_mode = po1030_modes;
 	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(po1030_modes);
 	sd->desc->ctrls = po1030_ctrls;
 	sd->desc->nctrls = ARRAY_SIZE(po1030_ctrls);
+
+	for (i = 0; i < ARRAY_SIZE(po1030_ctrls); i++)
+		sensor_settings[i] = po1030_ctrls[i].qctrl.default_value;
+	sd->sensor_priv = sensor_settings;
+
 	return 0;
 }
 
 int po1030_init(struct sd *sd)
 {
+	s32 *sensor_settings = sd->sensor_priv;
 	int i, err = 0;
 
 	/* Init the sensor */
@@ -185,47 +271,206 @@ int po1030_init(struct sd *sd)
 			return -EINVAL;
 		}
 	}
+	if (err < 0)
+		return err;
 
 	if (dump_sensor)
 		po1030_dump_registers(sd);
 
+	err = po1030_set_exposure(&sd->gspca_dev,
+				   sensor_settings[EXPOSURE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = po1030_set_gain(&sd->gspca_dev, sensor_settings[GAIN_IDX]);
+	if (err < 0)
+		return err;
+
+	err = po1030_set_hflip(&sd->gspca_dev, sensor_settings[HFLIP_IDX]);
+	if (err < 0)
+		return err;
+
+	err = po1030_set_vflip(&sd->gspca_dev, sensor_settings[VFLIP_IDX]);
+	if (err < 0)
+		return err;
+
+	err = po1030_set_red_balance(&sd->gspca_dev,
+				      sensor_settings[RED_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = po1030_set_blue_balance(&sd->gspca_dev,
+				      sensor_settings[BLUE_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = po1030_set_green_balance(&sd->gspca_dev,
+				       sensor_settings[GREEN_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = po1030_set_auto_white_balance(&sd->gspca_dev,
+				sensor_settings[AUTO_WHITE_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = po1030_set_auto_exposure(&sd->gspca_dev,
+				sensor_settings[AUTO_EXPOSURE_IDX]);
 	return err;
 }
 
-int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+int po1030_start(struct sd *sd)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-	u8 i2c_data;
-	int err;
+	struct cam *cam = &sd->gspca_dev.cam;
+	int i, err = 0;
+	int width = cam->cam_mode[sd->gspca_dev.curr_mode].width;
+	int height = cam->cam_mode[sd->gspca_dev.curr_mode].height;
+	int ver_offs = cam->cam_mode[sd->gspca_dev.curr_mode].priv;
+	u8 data;
+
+	switch (width) {
+	case 320:
+		data = PO1030_SUBSAMPLING;
+		err = m5602_write_sensor(sd, PO1030_CONTROL3, &data, 1);
+		if (err < 0)
+			return err;
+
+		data = ((width + 3) >> 8) & 0xff;
+		err = m5602_write_sensor(sd, PO1030_WINDOWWIDTH_H, &data, 1);
+		if (err < 0)
+			return err;
+
+		data = (width + 3) & 0xff;
+		err = m5602_write_sensor(sd, PO1030_WINDOWWIDTH_L, &data, 1);
+		if (err < 0)
+			return err;
+
+		data = ((height + 1) >> 8) & 0xff;
+		err = m5602_write_sensor(sd, PO1030_WINDOWHEIGHT_H, &data, 1);
+		if (err < 0)
+			return err;
+
+		data = (height + 1) & 0xff;
+		err = m5602_write_sensor(sd, PO1030_WINDOWHEIGHT_L, &data, 1);
+
+		height += 6;
+		width -= 1;
+		break;
+
+	case 640:
+		data = 0;
+		err = m5602_write_sensor(sd, PO1030_CONTROL3, &data, 1);
+		if (err < 0)
+			return err;
+
+		data = ((width + 7) >> 8) & 0xff;
+		err = m5602_write_sensor(sd, PO1030_WINDOWWIDTH_H, &data, 1);
+		if (err < 0)
+			return err;
+
+		data = (width + 7) & 0xff;
+		err = m5602_write_sensor(sd, PO1030_WINDOWWIDTH_L, &data, 1);
+		if (err < 0)
+			return err;
+
+		data = ((height + 3) >> 8) & 0xff;
+		err = m5602_write_sensor(sd, PO1030_WINDOWHEIGHT_H, &data, 1);
+		if (err < 0)
+			return err;
+
+		data = (height + 3) & 0xff;
+		err = m5602_write_sensor(sd, PO1030_WINDOWHEIGHT_L, &data, 1);
+
+		height += 12;
+		width -= 2;
+		break;
+	}
+	err = m5602_write_bridge(sd, M5602_XB_SENSOR_TYPE, 0x0c);
+	if (err < 0)
+		return err;
 
-	err = m5602_read_sensor(sd, PO1030_REG_INTEGLINES_H,
-				 &i2c_data, 1);
+	err = m5602_write_bridge(sd, M5602_XB_LINE_OF_FRAME_H, 0x81);
 	if (err < 0)
 		return err;
-	*val = (i2c_data << 8);
 
-	err = m5602_read_sensor(sd, PO1030_REG_INTEGLINES_M,
-				 &i2c_data, 1);
-	*val |= i2c_data;
+	err = m5602_write_bridge(sd, M5602_XB_PIX_OF_LINE_H, 0x82);
+	if (err < 0)
+		return err;
 
-	PDEBUG(D_V4L2, "Exposure read as %d", *val);
+	err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0x01);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA,
+				 ((ver_offs >> 8) & 0xff));
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, (ver_offs & 0xff));
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < 2 && !err; i++)
+		err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, 0);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, (height >> 8) & 0xff);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, (height & 0xff));
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < 2 && !err; i++)
+		err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, 0);
+
+	for (i = 0; i < 2 && !err; i++)
+		err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0);
+
+	for (i = 0; i < 2 && !err; i++)
+		err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA, 0);
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA, (width >> 8) & 0xff);
+	if (err < 0)
+		return err;
 
+	err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA, (width & 0xff));
+	if (err < 0)
+		return err;
+
+	err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0);
 	return err;
 }
 
-int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+static int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[EXPOSURE_IDX];
+	PDEBUG(D_V4L2, "Exposure read as %d", *val);
+	return 0;
+}
+
+static int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 i2c_data;
 	int err;
 
+	sensor_settings[EXPOSURE_IDX] = val;
 	PDEBUG(D_V4L2, "Set exposure to %d", val & 0xffff);
 
 	i2c_data = ((val & 0xff00) >> 8);
 	PDEBUG(D_V4L2, "Set exposure to high byte to 0x%x",
 	       i2c_data);
 
-	err = m5602_write_sensor(sd, PO1030_REG_INTEGLINES_H,
+	err = m5602_write_sensor(sd, PO1030_INTEGLINES_H,
 				  &i2c_data, 1);
 	if (err < 0)
 		return err;
@@ -233,167 +478,256 @@ int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 	i2c_data = (val & 0xff);
 	PDEBUG(D_V4L2, "Set exposure to low byte to 0x%x",
 	       i2c_data);
-	err = m5602_write_sensor(sd, PO1030_REG_INTEGLINES_M,
+	err = m5602_write_sensor(sd, PO1030_INTEGLINES_M,
 				  &i2c_data, 1);
 
 	return err;
 }
 
-int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+static int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 i2c_data;
-	int err;
+	s32 *sensor_settings = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, PO1030_REG_GLOBALGAIN,
-				 &i2c_data, 1);
-	*val = i2c_data;
+	*val = sensor_settings[GAIN_IDX];
 	PDEBUG(D_V4L2, "Read global gain %d", *val);
-
-	return err;
+	return 0;
 }
 
-int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 i2c_data;
 	int err;
 
-	err = m5602_read_sensor(sd, PO1030_REG_CONTROL2,
+	sensor_settings[GAIN_IDX] = val;
+
+	i2c_data = val & 0xff;
+	PDEBUG(D_V4L2, "Set global gain to %d", i2c_data);
+	err = m5602_write_sensor(sd, PO1030_GLOBALGAIN,
 				 &i2c_data, 1);
+	return err;
+}
 
-	*val = (i2c_data >> 7) & 0x01 ;
+static int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 
+	*val = sensor_settings[HFLIP_IDX];
 	PDEBUG(D_V4L2, "Read hflip %d", *val);
 
-	return err;
+	return 0;
 }
 
-int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
+static int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 i2c_data;
 	int err;
 
+	sensor_settings[HFLIP_IDX] = val;
+
 	PDEBUG(D_V4L2, "Set hflip %d", val);
-	err = m5602_read_sensor(sd, PO1030_REG_CONTROL2, &i2c_data, 1);
+	err = m5602_read_sensor(sd, PO1030_CONTROL2, &i2c_data, 1);
 	if (err < 0)
 		return err;
 
 	i2c_data = (0x7f & i2c_data) | ((val & 0x01) << 7);
 
-	err = m5602_write_sensor(sd, PO1030_REG_CONTROL2,
+	err = m5602_write_sensor(sd, PO1030_CONTROL2,
 				 &i2c_data, 1);
 
 	return err;
 }
 
-int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 i2c_data;
-	int err;
-
-	err = m5602_read_sensor(sd, PO1030_REG_GLOBALGAIN,
-				 &i2c_data, 1);
-
-	*val = (i2c_data >> 6) & 0x01;
+	s32 *sensor_settings = sd->sensor_priv;
 
+	*val = sensor_settings[VFLIP_IDX];
 	PDEBUG(D_V4L2, "Read vflip %d", *val);
 
-	return err;
+	return 0;
 }
 
-int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
+static int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 i2c_data;
 	int err;
 
+	sensor_settings[VFLIP_IDX] = val;
+
 	PDEBUG(D_V4L2, "Set vflip %d", val);
-	err = m5602_read_sensor(sd, PO1030_REG_CONTROL2, &i2c_data, 1);
+	err = m5602_read_sensor(sd, PO1030_CONTROL2, &i2c_data, 1);
 	if (err < 0)
 		return err;
 
 	i2c_data = (i2c_data & 0xbf) | ((val & 0x01) << 6);
 
-	err = m5602_write_sensor(sd, PO1030_REG_CONTROL2,
+	err = m5602_write_sensor(sd, PO1030_CONTROL2,
 				 &i2c_data, 1);
 
 	return err;
 }
 
-int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+static int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[RED_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read red gain %d", *val);
+	return 0;
+}
+
+static int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 i2c_data;
 	int err;
 
+	sensor_settings[RED_BALANCE_IDX] = val;
+
 	i2c_data = val & 0xff;
-	PDEBUG(D_V4L2, "Set global gain to %d", i2c_data);
-	err = m5602_write_sensor(sd, PO1030_REG_GLOBALGAIN,
+	PDEBUG(D_V4L2, "Set red gain to %d", i2c_data);
+	err = m5602_write_sensor(sd, PO1030_RED_GAIN,
 				  &i2c_data, 1);
 	return err;
 }
 
-int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val)
+static int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 i2c_data;
-	int err;
+	s32 *sensor_settings = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, PO1030_REG_RED_GAIN,
-				 &i2c_data, 1);
-	*val = i2c_data;
-	PDEBUG(D_V4L2, "Read red gain %d", *val);
-	return err;
+	*val = sensor_settings[BLUE_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read blue gain %d", *val);
+
+	return 0;
 }
 
-int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
+static int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 i2c_data;
 	int err;
 
+	sensor_settings[BLUE_BALANCE_IDX] = val;
+
 	i2c_data = val & 0xff;
-	PDEBUG(D_V4L2, "Set red gain to %d", i2c_data);
-	err = m5602_write_sensor(sd, PO1030_REG_RED_GAIN,
+	PDEBUG(D_V4L2, "Set blue gain to %d", i2c_data);
+	err = m5602_write_sensor(sd, PO1030_BLUE_GAIN,
 				  &i2c_data, 1);
+
 	return err;
 }
 
-int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val)
+static int po1030_get_green_balance(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[GREEN_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read green gain %d", *val);
+
+	return 0;
+}
+
+static int po1030_set_green_balance(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 i2c_data;
 	int err;
 
-	err = m5602_read_sensor(sd, PO1030_REG_BLUE_GAIN,
+	sensor_settings[GREEN_BALANCE_IDX] = val;
+	i2c_data = val & 0xff;
+	PDEBUG(D_V4L2, "Set green gain to %d", i2c_data);
+
+	err = m5602_write_sensor(sd, PO1030_GREEN_1_GAIN,
+			   &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	return m5602_write_sensor(sd, PO1030_GREEN_2_GAIN,
 				 &i2c_data, 1);
-	*val = i2c_data;
-	PDEBUG(D_V4L2, "Read blue gain %d", *val);
+}
 
-	return err;
+static int po1030_get_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[AUTO_WHITE_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Auto white balancing is %d", *val);
+
+	return 0;
 }
 
-int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
+static int po1030_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 i2c_data;
 	int err;
-	i2c_data = val & 0xff;
-	PDEBUG(D_V4L2, "Set blue gain to %d", i2c_data);
-	err = m5602_write_sensor(sd, PO1030_REG_BLUE_GAIN,
-				  &i2c_data, 1);
 
+	sensor_settings[AUTO_WHITE_BALANCE_IDX] = val;
+
+	err = m5602_read_sensor(sd, PO1030_AUTOCTRL1, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	PDEBUG(D_V4L2, "Set auto white balance to %d", val);
+	i2c_data = (i2c_data & 0xfe) | (val & 0x01);
+	err = m5602_write_sensor(sd, PO1030_AUTOCTRL1, &i2c_data, 1);
 	return err;
 }
 
-int po1030_power_down(struct sd *sd)
+static int po1030_get_auto_exposure(struct gspca_dev *gspca_dev,
+				    __s32 *val)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[AUTO_EXPOSURE_IDX];
+	PDEBUG(D_V4L2, "Auto exposure is %d", *val);
 	return 0;
 }
 
+static int po1030_set_auto_exposure(struct gspca_dev *gspca_dev,
+				    __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+	u8 i2c_data;
+	int err;
+
+	sensor_settings[AUTO_EXPOSURE_IDX] = val;
+	err = m5602_read_sensor(sd, PO1030_AUTOCTRL1, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	PDEBUG(D_V4L2, "Set auto exposure to %d", val);
+	i2c_data = (i2c_data & 0xfd) | ((val & 0x01) << 1);
+	return m5602_write_sensor(sd, PO1030_AUTOCTRL1, &i2c_data, 1);
+}
+
+void po1030_disconnect(struct sd *sd)
+{
+	sd->sensor = NULL;
+	kfree(sd->sensor_priv);
+}
+
 static void po1030_dump_registers(struct sd *sd)
 {
 	int address;
diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h
index c10b1233581..1ea380b2bbe 100644
--- a/drivers/media/video/gspca/m5602/m5602_po1030.h
+++ b/drivers/media/video/gspca/m5602/m5602_po1030.h
@@ -25,98 +25,123 @@
 
 /*****************************************************************************/
 
-#define PO1030_REG_DEVID_H		0x00
-#define PO1030_REG_DEVID_L		0x01
-#define PO1030_REG_FRAMEWIDTH_H		0x04
-#define PO1030_REG_FRAMEWIDTH_L		0x05
-#define PO1030_REG_FRAMEHEIGHT_H	0x06
-#define PO1030_REG_FRAMEHEIGHT_L	0x07
-#define PO1030_REG_WINDOWX_H		0x08
-#define PO1030_REG_WINDOWX_L		0x09
-#define PO1030_REG_WINDOWY_H		0x0a
-#define PO1030_REG_WINDOWY_L		0x0b
-#define PO1030_REG_WINDOWWIDTH_H	0x0c
-#define PO1030_REG_WINDOWWIDTH_L	0x0d
-#define PO1030_REG_WINDOWHEIGHT_H	0x0e
-#define PO1030_REG_WINDOWHEIGHT_L	0x0f
-
-#define PO1030_REG_GLOBALIBIAS		0x12
-#define PO1030_REG_PIXELIBIAS		0x13
-
-#define PO1030_REG_GLOBALGAIN		0x15
-#define PO1030_REG_RED_GAIN		0x16
-#define PO1030_REG_GREEN_1_GAIN		0x17
-#define PO1030_REG_BLUE_GAIN		0x18
-#define PO1030_REG_GREEN_2_GAIN		0x19
-
-#define PO1030_REG_INTEGLINES_H		0x1a
-#define PO1030_REG_INTEGLINES_M		0x1b
-#define PO1030_REG_INTEGLINES_L		0x1c
-
-#define PO1030_REG_CONTROL1		0x1d
-#define PO1030_REG_CONTROL2		0x1e
-#define PO1030_REG_CONTROL3		0x1f
-#define PO1030_REG_CONTROL4		0x20
-
-#define PO1030_REG_PERIOD50_H		0x23
-#define PO1030_REG_PERIOD50_L		0x24
-#define PO1030_REG_PERIOD60_H		0x25
-#define PO1030_REG_PERIOD60_L		0x26
-#define PO1030_REG_REGCLK167		0x27
-#define PO1030_REG_DELTA50		0x28
-#define PO1030_REG_DELTA60		0x29
-
-#define PO1030_REG_ADCOFFSET		0x2c
+#define PO1030_DEVID_H		0x00
+#define PO1030_DEVID_L		0x01
+#define PO1030_FRAMEWIDTH_H	0x04
+#define PO1030_FRAMEWIDTH_L	0x05
+#define PO1030_FRAMEHEIGHT_H	0x06
+#define PO1030_FRAMEHEIGHT_L	0x07
+#define PO1030_WINDOWX_H	0x08
+#define PO1030_WINDOWX_L	0x09
+#define PO1030_WINDOWY_H	0x0a
+#define PO1030_WINDOWY_L	0x0b
+#define PO1030_WINDOWWIDTH_H	0x0c
+#define PO1030_WINDOWWIDTH_L	0x0d
+#define PO1030_WINDOWHEIGHT_H	0x0e
+#define PO1030_WINDOWHEIGHT_L	0x0f
+
+#define PO1030_GLOBALIBIAS	0x12
+#define PO1030_PIXELIBIAS	0x13
+
+#define PO1030_GLOBALGAIN	0x15
+#define PO1030_RED_GAIN		0x16
+#define PO1030_GREEN_1_GAIN	0x17
+#define PO1030_BLUE_GAIN	0x18
+#define PO1030_GREEN_2_GAIN	0x19
+
+#define PO1030_INTEGLINES_H	0x1a
+#define PO1030_INTEGLINES_M	0x1b
+#define PO1030_INTEGLINES_L	0x1c
+
+#define PO1030_CONTROL1		0x1d
+#define PO1030_CONTROL2		0x1e
+#define PO1030_CONTROL3		0x1f
+#define PO1030_CONTROL4		0x20
+
+#define PO1030_PERIOD50_H	0x23
+#define PO1030_PERIOD50_L	0x24
+#define PO1030_PERIOD60_H	0x25
+#define PO1030_PERIOD60_L	0x26
+#define PO1030_REGCLK167	0x27
+#define PO1030_FLICKER_DELTA50	0x28
+#define PO1030_FLICKERDELTA60	0x29
+
+#define PO1030_ADCOFFSET	0x2c
 
 /* Gamma Correction Coeffs */
-#define PO1030_REG_GC0			0x2d
-#define PO1030_REG_GC1			0x2e
-#define PO1030_REG_GC2			0x2f
-#define PO1030_REG_GC3			0x30
-#define PO1030_REG_GC4			0x31
-#define PO1030_REG_GC5			0x32
-#define PO1030_REG_GC6			0x33
-#define PO1030_REG_GC7			0x34
+#define PO1030_GC0		0x2d
+#define PO1030_GC1		0x2e
+#define PO1030_GC2		0x2f
+#define PO1030_GC3		0x30
+#define PO1030_GC4		0x31
+#define PO1030_GC5		0x32
+#define PO1030_GC6		0x33
+#define PO1030_GC7		0x34
 
 /* Color Transform Matrix */
-#define PO1030_REG_CT0			0x35
-#define PO1030_REG_CT1			0x36
-#define PO1030_REG_CT2			0x37
-#define PO1030_REG_CT3			0x38
-#define PO1030_REG_CT4			0x39
-#define PO1030_REG_CT5			0x3a
-#define PO1030_REG_CT6			0x3b
-#define PO1030_REG_CT7			0x3c
-#define PO1030_REG_CT8			0x3d
-
-#define PO1030_REG_AUTOCTRL1		0x3e
-#define PO1030_REG_AUTOCTRL2		0x3f
-
-#define PO1030_REG_YTARGET		0x40
-#define PO1030_REG_GLOBALGAINMIN	0x41
-#define PO1030_REG_GLOBALGAINMAX	0x42
+#define PO1030_CT0		0x35
+#define PO1030_CT1		0x36
+#define PO1030_CT2		0x37
+#define PO1030_CT3		0x38
+#define PO1030_CT4		0x39
+#define PO1030_CT5		0x3a
+#define PO1030_CT6		0x3b
+#define PO1030_CT7		0x3c
+#define PO1030_CT8		0x3d
+
+#define PO1030_AUTOCTRL1	0x3e
+#define PO1030_AUTOCTRL2	0x3f
+
+#define PO1030_YTARGET		0x40
+#define PO1030_GLOBALGAINMIN	0x41
+#define PO1030_GLOBALGAINMAX	0x42
+
+#define PO1030_AWB_RED_TUNING	0x47
+#define PO1030_AWB_BLUE_TUNING	0x48
 
 /* Output format control */
-#define PO1030_REG_OUTFORMCTRL1		0x5a
-#define PO1030_REG_OUTFORMCTRL2		0x5b
-#define PO1030_REG_OUTFORMCTRL3		0x5c
-#define PO1030_REG_OUTFORMCTRL4		0x5d
-#define PO1030_REG_OUTFORMCTRL5		0x5e
+#define PO1030_OUTFORMCTRL1	0x5a
+#define PO1030_OUTFORMCTRL2	0x5b
+#define PO1030_OUTFORMCTRL3	0x5c
+#define PO1030_OUTFORMCTRL4	0x5d
+#define PO1030_OUTFORMCTRL5	0x5e
 
-/* Imaging coefficients */
-#define PO1030_REG_YBRIGHT		0x73
-#define PO1030_REG_YCONTRAST		0x74
-#define PO1030_REG_YSATURATION		0x75
+#define PO1030_EDGE_ENH_OFF	0x5f
+#define PO1030_EGA		0x60
 
-#define PO1030_HFLIP			(1 << 7)
-#define PO1030_VFLIP			(1 << 6)
+#define PO1030_Cb_U_GAIN	0x63
+#define PO1030_Cr_V_GAIN	0x64
+
+#define PO1030_YCONTRAST	0x74
+#define PO1030_YSATURATION	0x75
+
+#define PO1030_HFLIP		(1 << 7)
+#define PO1030_VFLIP		(1 << 6)
+
+#define PO1030_HREF_ENABLE	(1 << 6)
+
+#define PO1030_RAW_RGB_BAYER	0x4
+
+#define PO1030_FRAME_EQUAL	(1 << 3)
+#define PO1030_AUTO_SUBSAMPLING (1 << 4)
+
+#define PO1030_WEIGHT_WIN_2X	(1 << 3)
+
+#define PO1030_SHUTTER_MODE	(1 << 6)
+#define PO1030_AUTO_SUBSAMPLING	(1 << 4)
+#define PO1030_FRAME_EQUAL	(1 << 3)
+
+#define PO1030_SENSOR_RESET	(1 << 5)
+
+#define PO1030_SUBSAMPLING	(1 << 6)
 
 /*****************************************************************************/
 
 #define PO1030_GLOBAL_GAIN_DEFAULT	0x12
 #define PO1030_EXPOSURE_DEFAULT		0x0085
-#define PO1030_BLUE_GAIN_DEFAULT 	0x40
-#define PO1030_RED_GAIN_DEFAULT 	0x40
+#define PO1030_BLUE_GAIN_DEFAULT 	0x36
+#define PO1030_RED_GAIN_DEFAULT 	0x36
+#define PO1030_GREEN_GAIN_DEFAULT 	0x40
 
 /*****************************************************************************/
 
@@ -126,20 +151,8 @@ extern int dump_sensor;
 
 int po1030_probe(struct sd *sd);
 int po1030_init(struct sd *sd);
-int po1030_power_down(struct sd *sd);
-
-int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
-int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
-int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
-int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val);
-int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val);
-int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val);
-int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val);
-int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val);
-int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
-int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
-int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
-int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
+int po1030_start(struct sd *sd);
+void po1030_disconnect(struct sd *sd);
 
 static const struct m5602_sensor po1030 = {
 	.name = "PO1030",
@@ -149,7 +162,8 @@ static const struct m5602_sensor po1030 = {
 
 	.probe = po1030_probe,
 	.init = po1030_init,
-	.power_down = po1030_power_down,
+	.start = po1030_start,
+	.disconnect = po1030_disconnect,
 };
 
 static const unsigned char preinit_po1030[][3] =
@@ -159,248 +173,103 @@ static const unsigned char preinit_po1030[][3] =
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d},
 	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
 	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-
-	{SENSOR, PO1030_REG_AUTOCTRL2, 0x24},
-
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x87},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-
-	{SENSOR, PO1030_REG_AUTOCTRL2, 0x24},
-
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
 	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
 	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
 	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
+
+	{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
+
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
 	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x00}
 };
 
-static const unsigned char init_po1030[][4] =
+static const unsigned char init_po1030[][3] =
 {
 	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
 	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
-	/*sequence 1*/
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d},
-
 	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
 	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	/*end of sequence 1*/
-
-	/*sequence 2 (same as stop sequence)*/
-	{SENSOR, PO1030_REG_AUTOCTRL2, 0x24},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	/*end of sequence 2*/
 
-	/*sequence 5*/
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x87},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	/*end of sequence 5*/
-
-	/*sequence 2 stop */
-	{SENSOR, PO1030_REG_AUTOCTRL2, 0x24},
+	{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
 
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
 	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
 	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	/*end of sequence 2 stop */
-
-/* ---------------------------------
- * end of init - begin of start
- * --------------------------------- */
-
-	/*sequence 3*/
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	/*end of sequence 3*/
-	/*sequence 4*/
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
 
-	{SENSOR, PO1030_REG_AUTOCTRL2, 0x04},
+	{SENSOR, PO1030_AUTOCTRL2, 0x04},
+
+	{SENSOR, PO1030_OUTFORMCTRL2, PO1030_RAW_RGB_BAYER},
+	{SENSOR, PO1030_AUTOCTRL1, PO1030_WEIGHT_WIN_2X},
+
+	{SENSOR, PO1030_CONTROL2, 0x03},
+	{SENSOR, 0x21, 0x90},
+	{SENSOR, PO1030_YTARGET, 0x60},
+	{SENSOR, 0x59, 0x13},
+	{SENSOR, PO1030_OUTFORMCTRL1, PO1030_HREF_ENABLE},
+	{SENSOR, PO1030_EDGE_ENH_OFF, 0x00},
+	{SENSOR, PO1030_EGA, 0x80},
+	{SENSOR, 0x78, 0x14},
+	{SENSOR, 0x6f, 0x01},
+	{SENSOR, PO1030_GLOBALGAINMAX, 0x14},
+	{SENSOR, PO1030_Cb_U_GAIN, 0x38},
+	{SENSOR, PO1030_Cr_V_GAIN, 0x38},
+	{SENSOR, PO1030_CONTROL1, PO1030_SHUTTER_MODE |
+				  PO1030_AUTO_SUBSAMPLING |
+				  PO1030_FRAME_EQUAL},
+	{SENSOR, PO1030_GC0, 0x10},
+	{SENSOR, PO1030_GC1, 0x20},
+	{SENSOR, PO1030_GC2, 0x40},
+	{SENSOR, PO1030_GC3, 0x60},
+	{SENSOR, PO1030_GC4, 0x80},
+	{SENSOR, PO1030_GC5, 0xa0},
+	{SENSOR, PO1030_GC6, 0xc0},
+	{SENSOR, PO1030_GC7, 0xff},
 
 	/* Set the width to 751 */
-	{SENSOR, PO1030_REG_FRAMEWIDTH_H, 0x02},
-	{SENSOR, PO1030_REG_FRAMEWIDTH_L, 0xef},
+	{SENSOR, PO1030_FRAMEWIDTH_H, 0x02},
+	{SENSOR, PO1030_FRAMEWIDTH_L, 0xef},
 
 	/* Set the height to 540 */
-	{SENSOR, PO1030_REG_FRAMEHEIGHT_H, 0x02},
-	{SENSOR, PO1030_REG_FRAMEHEIGHT_L, 0x1c},
+	{SENSOR, PO1030_FRAMEHEIGHT_H, 0x02},
+	{SENSOR, PO1030_FRAMEHEIGHT_L, 0x1c},
 
 	/* Set the x window to 1 */
-	{SENSOR, PO1030_REG_WINDOWX_H, 0x00},
-	{SENSOR, PO1030_REG_WINDOWX_L, 0x01},
+	{SENSOR, PO1030_WINDOWX_H, 0x00},
+	{SENSOR, PO1030_WINDOWX_L, 0x01},
 
 	/* Set the y window to 1 */
-	{SENSOR, PO1030_REG_WINDOWY_H, 0x00},
-	{SENSOR, PO1030_REG_WINDOWY_L, 0x01},
-
-	{SENSOR, PO1030_REG_WINDOWWIDTH_H, 0x02},
-	{SENSOR, PO1030_REG_WINDOWWIDTH_L, 0x87},
-	{SENSOR, PO1030_REG_WINDOWHEIGHT_H, 0x01},
-	{SENSOR, PO1030_REG_WINDOWHEIGHT_L, 0xe3},
-
-	{SENSOR, PO1030_REG_OUTFORMCTRL2, 0x04},
-	{SENSOR, PO1030_REG_OUTFORMCTRL2, 0x04},
-	{SENSOR, PO1030_REG_AUTOCTRL1, 0x08},
-	{SENSOR, PO1030_REG_CONTROL2, 0x03},
-	{SENSOR, 0x21, 0x90},
-	{SENSOR, PO1030_REG_YTARGET, 0x60},
-	{SENSOR, 0x59, 0x13},
-	{SENSOR, PO1030_REG_OUTFORMCTRL1, 0x40},
-	{SENSOR, 0x5f, 0x00},
-	{SENSOR, 0x60, 0x80},
-	{SENSOR, 0x78, 0x14},
-	{SENSOR, 0x6f, 0x01},
-	{SENSOR, PO1030_REG_CONTROL1, 0x18},
-	{SENSOR, PO1030_REG_GLOBALGAINMAX, 0x14},
-	{SENSOR, 0x63, 0x38},
-	{SENSOR, 0x64, 0x38},
-	{SENSOR, PO1030_REG_CONTROL1, 0x58},
-	{SENSOR, PO1030_REG_RED_GAIN, 0x30},
-	{SENSOR, PO1030_REG_GREEN_1_GAIN, 0x30},
-	{SENSOR, PO1030_REG_BLUE_GAIN, 0x30},
-	{SENSOR, PO1030_REG_GREEN_2_GAIN, 0x30},
-	{SENSOR, PO1030_REG_GC0, 0x10},
-	{SENSOR, PO1030_REG_GC1, 0x20},
-	{SENSOR, PO1030_REG_GC2, 0x40},
-	{SENSOR, PO1030_REG_GC3, 0x60},
-	{SENSOR, PO1030_REG_GC4, 0x80},
-	{SENSOR, PO1030_REG_GC5, 0xa0},
-	{SENSOR, PO1030_REG_GC6, 0xc0},
-	{SENSOR, PO1030_REG_GC7, 0xff},
-	/*end of sequence 4*/
-	/*sequence 5*/
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x7e},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	/*end of sequence 5*/
-
-	/*sequence 6*/
-	/* Changing 40 in f0 the image becomes green in bayer mode and red in
-	 * rgb mode */
-	{SENSOR, PO1030_REG_RED_GAIN, PO1030_RED_GAIN_DEFAULT},
-	/* in changing 40 in f0 the image becomes green in bayer mode and red in
-	 * rgb mode */
-	{SENSOR, PO1030_REG_BLUE_GAIN, PO1030_BLUE_GAIN_DEFAULT},
+	{SENSOR, PO1030_WINDOWY_H, 0x00},
+	{SENSOR, PO1030_WINDOWY_L, 0x01},
 
 	/* with a very low lighted environment increase the exposure but
 	 * decrease the FPS (Frame Per Second) */
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 
-	/* Controls high exposure more than SENSOR_LOW_EXPOSURE, use only in
-	 * low lighted environment (f0 is more than ff ?)*/
-	{SENSOR, PO1030_REG_INTEGLINES_H, ((PO1030_EXPOSURE_DEFAULT >> 2)
-		& 0xff)},
-
-	/* Controls middle exposure, use only in high lighted environment */
-	{SENSOR, PO1030_REG_INTEGLINES_M, PO1030_EXPOSURE_DEFAULT & 0xff},
-
-	/* Controls clarity (not sure) */
-	{SENSOR, PO1030_REG_INTEGLINES_L, 0x00},
-	/* Controls gain (the image is more lighted) */
-	{SENSOR, PO1030_REG_GLOBALGAIN, PO1030_GLOBAL_GAIN_DEFAULT},
-
-	/* Sets the width */
-	{SENSOR, PO1030_REG_FRAMEWIDTH_H, 0x02},
-	{SENSOR, PO1030_REG_FRAMEWIDTH_L, 0xef}
-	/*end of sequence 6*/
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
 };
 
 #endif
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 4306d596056..191bcd71897 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -18,6 +18,19 @@
 
 #include "m5602_s5k4aa.h"
 
+static int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k4aa_get_noise(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k4aa_set_noise(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k4aa_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k4aa_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
+
 static
     const
 	struct dmi_system_id s5k4aa_vflip_dmi_table[] = {
@@ -46,6 +59,18 @@ static
 			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "GX700/GX705/EX700")
 		}
+	}, {
+		.ident = "MSI L735",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MS-1717X")
+		}
+	}, {
+		.ident = "Lenovo Y300",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "L3000 Y300"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Y300")
+		}
 	},
 	{ }
 };
@@ -61,10 +86,22 @@ static struct v4l2_pix_format s5k4aa_modes[] = {
 		.bytesperline = 640,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0
+	},
+	{
+		1280,
+		1024,
+		V4L2_PIX_FMT_SBGGR8,
+		V4L2_FIELD_NONE,
+		.sizeimage =
+			1280 * 1024,
+		.bytesperline = 1280,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
 	}
 };
 
-const static struct ctrl s5k4aa_ctrls[] = {
+static const struct ctrl s5k4aa_ctrls[] = {
+#define VFLIP_IDX 0
 	{
 		{
 			.id 		= V4L2_CID_VFLIP,
@@ -77,8 +114,9 @@ const static struct ctrl s5k4aa_ctrls[] = {
 		},
 		.set = s5k4aa_set_vflip,
 		.get = s5k4aa_get_vflip
-
-	}, {
+	},
+#define HFLIP_IDX 1
+	{
 		{
 			.id 		= V4L2_CID_HFLIP,
 			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
@@ -90,8 +128,9 @@ const static struct ctrl s5k4aa_ctrls[] = {
 		},
 		.set = s5k4aa_set_hflip,
 		.get = s5k4aa_get_hflip
-
-	}, {
+	},
+#define GAIN_IDX 2
+	{
 		{
 			.id		= V4L2_CID_GAIN,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
@@ -99,12 +138,14 @@ const static struct ctrl s5k4aa_ctrls[] = {
 			.minimum	= 0,
 			.maximum	= 127,
 			.step		= 1,
-			.default_value	= 0xa0,
+			.default_value	= S5K4AA_DEFAULT_GAIN,
 			.flags		= V4L2_CTRL_FLAG_SLIDER
 		},
 		.set = s5k4aa_set_gain,
 		.get = s5k4aa_get_gain
-	}, {
+	},
+#define EXPOSURE_IDX 3
+	{
 		{
 			.id		= V4L2_CID_EXPOSURE,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
@@ -117,7 +158,36 @@ const static struct ctrl s5k4aa_ctrls[] = {
 		},
 		.set = s5k4aa_set_exposure,
 		.get = s5k4aa_get_exposure
-	}
+	},
+#define NOISE_SUPP_IDX 4
+	{
+		{
+			.id		= V4L2_CID_PRIVATE_BASE,
+			.type		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name		= "Noise suppression (smoothing)",
+			.minimum	= 0,
+			.maximum	= 1,
+			.step		= 1,
+			.default_value	= 1,
+		},
+			.set = s5k4aa_set_noise,
+			.get = s5k4aa_get_noise
+	},
+#define BRIGHTNESS_IDX 5
+	{
+		{
+			.id		= V4L2_CID_BRIGHTNESS,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "Brightness",
+			.minimum	= 0,
+			.maximum	= 0x1f,
+			.step		= 1,
+			.default_value	= S5K4AA_DEFAULT_BRIGHTNESS,
+		},
+			.set = s5k4aa_set_brightness,
+			.get = s5k4aa_get_brightness
+	},
+
 };
 
 static void s5k4aa_dump_registers(struct sd *sd);
@@ -127,6 +197,7 @@ int s5k4aa_probe(struct sd *sd)
 	u8 prod_id[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
 	const u8 expected_prod_id[6] = {0x00, 0x10, 0x00, 0x4b, 0x33, 0x75};
 	int i, err = 0;
+	s32 *sensor_settings;
 
 	if (force_sensor) {
 		if (force_sensor == S5K4AA_SENSOR) {
@@ -185,10 +256,20 @@ int s5k4aa_probe(struct sd *sd)
 		info("Detected a s5k4aa sensor");
 
 sensor_found:
+	sensor_settings = kmalloc(
+		ARRAY_SIZE(s5k4aa_ctrls) * sizeof(s32), GFP_KERNEL);
+	if (!sensor_settings)
+		return -ENOMEM;
+
 	sd->gspca_dev.cam.cam_mode = s5k4aa_modes;
 	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(s5k4aa_modes);
 	sd->desc->ctrls = s5k4aa_ctrls;
 	sd->desc->nctrls = ARRAY_SIZE(s5k4aa_ctrls);
+
+	for (i = 0; i < ARRAY_SIZE(s5k4aa_ctrls); i++)
+		sensor_settings[i] = s5k4aa_ctrls[i].qctrl.default_value;
+	sd->sensor_priv = sensor_settings;
+
 	return 0;
 }
 
@@ -197,9 +278,45 @@ int s5k4aa_start(struct sd *sd)
 	int i, err = 0;
 	u8 data[2];
 	struct cam *cam = &sd->gspca_dev.cam;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	switch (cam->cam_mode[sd->gspca_dev.curr_mode].width) {
+	case 1280:
+		PDEBUG(D_V4L2, "Configuring camera for SXGA mode");
+
+		for (i = 0; i < ARRAY_SIZE(SXGA_s5k4aa); i++) {
+			switch (SXGA_s5k4aa[i][0]) {
+			case BRIDGE:
+				err = m5602_write_bridge(sd,
+						 SXGA_s5k4aa[i][1],
+						 SXGA_s5k4aa[i][2]);
+			break;
+
+			case SENSOR:
+				data[0] = SXGA_s5k4aa[i][2];
+				err = m5602_write_sensor(sd,
+						 SXGA_s5k4aa[i][1],
+						 data, 1);
+			break;
+
+			case SENSOR_LONG:
+				data[0] = SXGA_s5k4aa[i][2];
+				data[1] = SXGA_s5k4aa[i][3];
+				err = m5602_write_sensor(sd,
+						  SXGA_s5k4aa[i][1],
+						  data, 2);
+			break;
+
+			default:
+				err("Invalid stream command, exiting init");
+				return -EINVAL;
+			}
+		}
+		err = s5k4aa_set_noise(&sd->gspca_dev, 0);
+		if (err < 0)
+			return err;
+		break;
 
-	switch (cam->cam_mode[sd->gspca_dev.curr_mode].width)
-	{
 	case 640:
 		PDEBUG(D_V4L2, "Configuring camera for VGA mode");
 
@@ -231,8 +348,37 @@ int s5k4aa_start(struct sd *sd)
 				return -EINVAL;
 			}
 		}
+		err = s5k4aa_set_noise(&sd->gspca_dev, 1);
+		if (err < 0)
+			return err;
+		break;
 	}
-	return err;
+	if (err < 0)
+		return err;
+
+	err = s5k4aa_set_exposure(&sd->gspca_dev,
+				   sensor_settings[EXPOSURE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = s5k4aa_set_gain(&sd->gspca_dev, sensor_settings[GAIN_IDX]);
+	if (err < 0)
+		return err;
+
+	err = s5k4aa_set_brightness(&sd->gspca_dev,
+				     sensor_settings[BRIGHTNESS_IDX]);
+	if (err < 0)
+		return err;
+
+	err = s5k4aa_set_noise(&sd->gspca_dev, sensor_settings[NOISE_SUPP_IDX]);
+	if (err < 0)
+		return err;
+
+	err = s5k4aa_set_vflip(&sd->gspca_dev, sensor_settings[VFLIP_IDX]);
+	if (err < 0)
+		return err;
+
+	return s5k4aa_set_hflip(&sd->gspca_dev, sensor_settings[HFLIP_IDX]);
 }
 
 int s5k4aa_init(struct sd *sd)
@@ -270,62 +416,28 @@ int s5k4aa_init(struct sd *sd)
 	if (dump_sensor)
 		s5k4aa_dump_registers(sd);
 
-	if (!err && dmi_check_system(s5k4aa_vflip_dmi_table)) {
-		u8 data = 0x02;
-		info("vertical flip quirk active");
-		m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
-		m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
-		data |= S5K4AA_RM_V_FLIP;
-		data &= ~S5K4AA_RM_H_FLIP;
-		m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
-
-		/* Decrement COLSTART to preserve color order (BGGR) */
-		m5602_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1);
-		data--;
-		m5602_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1);
-
-		/* Increment ROWSTART to preserve color order (BGGR) */
-		m5602_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1);
-		data++;
-		m5602_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1);
-	}
-
-	return (err < 0) ? err : 0;
-}
-
-int s5k4aa_power_down(struct sd *sd)
-{
-	return 0;
+	return err;
 }
 
-int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+static int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 data = S5K4AA_PAGE_MAP_2;
-	int err;
-
-	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
-	if (err < 0)
-		return err;
+	s32 *sensor_settings = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, S5K4AA_EXPOSURE_HI, &data, 1);
-	if (err < 0)
-		return err;
-
-	*val = data << 8;
-	err = m5602_read_sensor(sd, S5K4AA_EXPOSURE_LO, &data, 1);
-	*val |= data;
+	*val = sensor_settings[EXPOSURE_IDX];
 	PDEBUG(D_V4L2, "Read exposure %d", *val);
 
-	return err;
+	return 0;
 }
 
-int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 data = S5K4AA_PAGE_MAP_2;
 	int err;
 
+	sensor_settings[EXPOSURE_IDX] = val;
 	PDEBUG(D_V4L2, "Set exposure to %d", val);
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
@@ -340,29 +452,26 @@ int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 data = S5K4AA_PAGE_MAP_2;
-	int err;
-
-	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
-	if (err < 0)
-		return err;
+	s32 *sensor_settings = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
-	*val = (data & S5K4AA_RM_V_FLIP) >> 7;
+	*val = sensor_settings[VFLIP_IDX];
 	PDEBUG(D_V4L2, "Read vertical flip %d", *val);
 
-	return err;
+	return 0;
 }
 
-int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 data = S5K4AA_PAGE_MAP_2;
 	int err;
 
+	sensor_settings[VFLIP_IDX] = val;
+
 	PDEBUG(D_V4L2, "Set vertical flip to %d", val);
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
@@ -370,56 +479,48 @@ int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 	err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
 	if (err < 0)
 		return err;
-	data = ((data & ~S5K4AA_RM_V_FLIP)
-			| ((val & 0x01) << 7));
-	err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
+
+	err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
 	if (err < 0)
 		return err;
 
-	if (val) {
-		err = m5602_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1);
-		if (err < 0)
-			return err;
-
-		data++;
-		err = m5602_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1);
-	} else {
-		err = m5602_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1);
-		if (err < 0)
-			return err;
+	if (dmi_check_system(s5k4aa_vflip_dmi_table))
+		val = !val;
 
-		data--;
-		err = m5602_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1);
-	}
+	data = ((data & ~S5K4AA_RM_V_FLIP) | ((val & 0x01) << 7));
+	err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
+	if (err < 0)
+		return err;
 
+	err = m5602_read_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1);
+	if (err < 0)
+		return err;
+	data = (data & 0xfe) | !val;
+	err = m5602_write_sensor(sd, S5K4AA_ROWSTART_LO, &data, 1);
 	return err;
 }
 
-int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 data = S5K4AA_PAGE_MAP_2;
-	int err;
-
-	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
-	if (err < 0)
-		return err;
+	s32 *sensor_settings = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
-	*val = (data & S5K4AA_RM_H_FLIP) >> 6;
+	*val = sensor_settings[HFLIP_IDX];
 	PDEBUG(D_V4L2, "Read horizontal flip %d", *val);
 
-	return err;
+	return 0;
 }
 
-int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 data = S5K4AA_PAGE_MAP_2;
 	int err;
 
-	PDEBUG(D_V4L2, "Set horizontal flip to %d",
-	       val);
+	sensor_settings[HFLIP_IDX] = val;
+
+	PDEBUG(D_V4L2, "Set horizontal flip to %d", val);
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
 		return err;
@@ -427,62 +528,116 @@ int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 	if (err < 0)
 		return err;
 
+	err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
+	if (err < 0)
+		return err;
+
+	if (dmi_check_system(s5k4aa_vflip_dmi_table))
+		val = !val;
+
 	data = ((data & ~S5K4AA_RM_H_FLIP) | ((val & 0x01) << 6));
 	err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
 	if (err < 0)
 		return err;
 
-	if (val) {
-		err = m5602_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1);
-		if (err < 0)
-			return err;
-		data++;
-		err = m5602_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1);
-		if (err < 0)
-			return err;
-	} else {
-		err = m5602_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1);
-		if (err < 0)
-			return err;
-		data--;
-		err = m5602_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1);
-	}
-
+	err = m5602_read_sensor(sd, S5K4AA_COLSTART_LO, &data, 1);
+	if (err < 0)
+		return err;
+	data = (data & 0xfe) | !val;
+	err = m5602_write_sensor(sd, S5K4AA_COLSTART_LO, &data, 1);
 	return err;
 }
 
-int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+static int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[GAIN_IDX];
+	PDEBUG(D_V4L2, "Read gain %d", *val);
+	return 0;
+}
+
+static int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 data = S5K4AA_PAGE_MAP_2;
 	int err;
 
+	sensor_settings[GAIN_IDX] = val;
+
+	PDEBUG(D_V4L2, "Set gain to %d", val);
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
 		return err;
 
-	err = m5602_read_sensor(sd, S5K4AA_GAIN_2, &data, 1);
-	*val = data;
-	PDEBUG(D_V4L2, "Read gain %d", *val);
+	data = val & 0xff;
+	err = m5602_write_sensor(sd, S5K4AA_GAIN, &data, 1);
 
 	return err;
 }
 
-int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k4aa_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[BRIGHTNESS_IDX];
+	PDEBUG(D_V4L2, "Read brightness %d", *val);
+	return 0;
+}
+
+static int s5k4aa_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
 	u8 data = S5K4AA_PAGE_MAP_2;
 	int err;
 
-	PDEBUG(D_V4L2, "Set gain to %d", val);
+	sensor_settings[BRIGHTNESS_IDX] = val;
+
+	PDEBUG(D_V4L2, "Set brightness to %d", val);
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
 		return err;
 
 	data = val & 0xff;
-	err = m5602_write_sensor(sd, S5K4AA_GAIN_2, &data, 1);
+	return m5602_write_sensor(sd, S5K4AA_BRIGHTNESS, &data, 1);
+}
 
-	return err;
+static int s5k4aa_get_noise(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[NOISE_SUPP_IDX];
+	PDEBUG(D_V4L2, "Read noise %d", *val);
+	return 0;
+}
+
+static int s5k4aa_set_noise(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+	u8 data = S5K4AA_PAGE_MAP_2;
+	int err;
+
+	sensor_settings[NOISE_SUPP_IDX] = val;
+
+	PDEBUG(D_V4L2, "Set noise to %d", val);
+	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
+	if (err < 0)
+		return err;
+
+	data = val & 0x01;
+	return m5602_write_sensor(sd, S5K4AA_NOISE_SUPP, &data, 1);
+}
+
+void s5k4aa_disconnect(struct sd *sd)
+{
+	sd->sensor = NULL;
+	kfree(sd->sensor_priv);
 }
 
 static void s5k4aa_dump_registers(struct sd *sd)
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h
index ca854d4f947..4440da4e7f0 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h
@@ -47,8 +47,9 @@
 #define S5K4AA_H_BLANK_LO__		0x1e
 #define S5K4AA_EXPOSURE_HI		0x17
 #define S5K4AA_EXPOSURE_LO		0x18
-#define S5K4AA_GAIN_1			0x1f /* (digital?) gain : 5 bits */
-#define S5K4AA_GAIN_2			0x20 /* (analogue?) gain : 7 bits */
+#define S5K4AA_BRIGHTNESS		0x1f /* (digital?) gain : 5 bits */
+#define S5K4AA_GAIN			0x20 /* (analogue?) gain : 7 bits */
+#define S5K4AA_NOISE_SUPP		0x37
 
 #define S5K4AA_RM_ROW_SKIP_4X		0x08
 #define S5K4AA_RM_ROW_SKIP_2X		0x04
@@ -57,6 +58,9 @@
 #define S5K4AA_RM_H_FLIP		0x40
 #define S5K4AA_RM_V_FLIP		0x80
 
+#define S5K4AA_DEFAULT_GAIN		0x5f
+#define S5K4AA_DEFAULT_BRIGHTNESS	0x10
+
 /*****************************************************************************/
 
 /* Kernel module parameters */
@@ -66,25 +70,17 @@ extern int dump_sensor;
 int s5k4aa_probe(struct sd *sd);
 int s5k4aa_init(struct sd *sd);
 int s5k4aa_start(struct sd *sd);
-int s5k4aa_power_down(struct sd *sd);
-
-int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
-int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
-int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
-int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+void s5k4aa_disconnect(struct sd *sd);
 
 static const struct m5602_sensor s5k4aa = {
 	.name = "S5K4AA",
+	.i2c_slave_id = 0x5a,
+	.i2c_regW = 2,
+
 	.probe = s5k4aa_probe,
 	.init = s5k4aa_init,
 	.start = s5k4aa_start,
-	.power_down = s5k4aa_power_down,
-	.i2c_slave_id = 0x5a,
-	.i2c_regW = 2,
+	.disconnect = s5k4aa_disconnect,
 };
 
 static const unsigned char preinit_s5k4aa[][4] =
@@ -179,30 +175,12 @@ static const unsigned char init_s5k4aa[][4] =
 	{SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00},
 	{SENSOR, 0x0c, 0x05, 0x00},
 	{SENSOR, 0x02, 0x0e, 0x00},
-	{SENSOR, S5K4AA_GAIN_1, 0x0f, 0x00},
-	{SENSOR, S5K4AA_GAIN_2, 0x00, 0x00},
-	{SENSOR, S5K4AA_GLOBAL_GAIN__, 0x01, 0x00},
-	{SENSOR, 0x11, 0x00, 0x00},
-	{SENSOR, 0x12, 0x00, 0x00},
-	{SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00},
 	{SENSOR, S5K4AA_READ_MODE, 0xa0, 0x00},
 	{SENSOR, 0x37, 0x00, 0x00},
-	{SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00},
-	{SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00},
-	{SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00},
-	{SENSOR, S5K4AA_COLSTART_LO, 0x0b, 0x00},
-	{SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x03, 0x00},
-	{SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0xc4, 0x00},
-	{SENSOR, S5K4AA_WINDOW_WIDTH_HI, 0x05, 0x00},
-	{SENSOR, S5K4AA_WINDOW_WIDTH_LO, 0x08, 0x00},
-	{SENSOR, S5K4AA_H_BLANK_HI__, 0x00, 0x00},
-	{SENSOR, S5K4AA_H_BLANK_LO__, 0x48, 0x00},
-	{SENSOR, S5K4AA_EXPOSURE_HI, 0x00, 0x00},
-	{SENSOR, S5K4AA_EXPOSURE_LO, 0x43, 0x00},
-	{SENSOR, 0x11, 0x04, 0x00},
-	{SENSOR, 0x12, 0xc3, 0x00},
-	{SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00},
+};
 
+static const unsigned char VGA_s5k4aa[][4] =
+{
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
 	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
@@ -238,7 +216,7 @@ static const unsigned char init_s5k4aa[][4] =
 	{SENSOR, 0x37, 0x01, 0x00},
 	/* ROWSTART_HI, ROWSTART_LO : 10 + (1024-960)/2 = 42 = 0x002a */
 	{SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00},
-	{SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00},
+	{SENSOR, S5K4AA_ROWSTART_LO, 0x29, 0x00},
 	{SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00},
 	{SENSOR, S5K4AA_COLSTART_LO, 0x0c, 0x00},
 	/* window_height_hi, window_height_lo : 960 = 0x03c0 */
@@ -255,12 +233,9 @@ static const unsigned char init_s5k4aa[][4] =
 	{SENSOR, 0x12, 0xc3, 0x00},
 	{SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00},
 	{SENSOR, 0x02, 0x0e, 0x00},
-	{SENSOR_LONG, S5K4AA_GLOBAL_GAIN__, 0x0f, 0x00},
-	{SENSOR, S5K4AA_GAIN_1, 0x0b, 0x00},
-	{SENSOR, S5K4AA_GAIN_2, 0xa0, 0x00}
 };
 
-static const unsigned char VGA_s5k4aa[][4] =
+static const unsigned char SXGA_s5k4aa[][4] =
 {
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
@@ -273,50 +248,42 @@ static const unsigned char VGA_s5k4aa[][4] =
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	/* VSYNC_PARA, VSYNC_PARA : img height 480 = 0x01e0 */
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe0, 0x00},
+	/* VSYNC_PARA, VSYNC_PARA : img height 1024 = 0x0400 */
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x04, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	/* HSYNC_PARA, HSYNC_PARA : img width 640 = 0x0280 */
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x80, 0x00},
+	/* HSYNC_PARA, HSYNC_PARA : img width 1280 = 0x0500 */
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x05, 0x00},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xa0, 0x00}, /* 48 MHz */
 
 	{SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00},
-	{SENSOR, S5K4AA_READ_MODE, S5K4AA_RM_H_FLIP | S5K4AA_RM_ROW_SKIP_2X
-		| S5K4AA_RM_COL_SKIP_2X, 0x00},
-	/* 0x37 : Fix image stability when light is too bright and improves
-	 * image quality in 640x480, but worsens it in 1280x1024 */
+	{SENSOR, S5K4AA_READ_MODE, S5K4AA_RM_H_FLIP, 0x00},
 	{SENSOR, 0x37, 0x01, 0x00},
-	/* ROWSTART_HI, ROWSTART_LO : 10 + (1024-960)/2 = 42 = 0x002a */
 	{SENSOR, S5K4AA_ROWSTART_HI, 0x00, 0x00},
-	{SENSOR, S5K4AA_ROWSTART_LO, 0x2a, 0x00},
+	{SENSOR, S5K4AA_ROWSTART_LO, 0x09, 0x00},
 	{SENSOR, S5K4AA_COLSTART_HI, 0x00, 0x00},
-	{SENSOR, S5K4AA_COLSTART_LO, 0x0c, 0x00},
-	/* window_height_hi, window_height_lo : 960 = 0x03c0 */
-	{SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x03, 0x00},
-	{SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0xc0, 0x00},
-	/* window_width_hi, window_width_lo : 1280 = 0x0500 */
+	{SENSOR, S5K4AA_COLSTART_LO, 0x0a, 0x00},
+	{SENSOR, S5K4AA_WINDOW_HEIGHT_HI, 0x04, 0x00},
+	{SENSOR, S5K4AA_WINDOW_HEIGHT_LO, 0x00, 0x00},
 	{SENSOR, S5K4AA_WINDOW_WIDTH_HI, 0x05, 0x00},
 	{SENSOR, S5K4AA_WINDOW_WIDTH_LO, 0x00, 0x00},
-	{SENSOR, S5K4AA_H_BLANK_HI__, 0x00, 0x00},
-	{SENSOR, S5K4AA_H_BLANK_LO__, 0xa8, 0x00}, /* helps to sync... */
+	{SENSOR, S5K4AA_H_BLANK_HI__, 0x01, 0x00},
+	{SENSOR, S5K4AA_H_BLANK_LO__, 0xa8, 0x00},
 	{SENSOR, S5K4AA_EXPOSURE_HI, 0x01, 0x00},
 	{SENSOR, S5K4AA_EXPOSURE_LO, 0x00, 0x00},
 	{SENSOR, 0x11, 0x04, 0x00},
 	{SENSOR, 0x12, 0xc3, 0x00},
 	{SENSOR, S5K4AA_PAGE_MAP, 0x02, 0x00},
 	{SENSOR, 0x02, 0x0e, 0x00},
-	{SENSOR_LONG, S5K4AA_GLOBAL_GAIN__, 0x0f, 0x00},
-	{SENSOR, S5K4AA_GAIN_1, 0x0b, 0x00},
-	{SENSOR, S5K4AA_GAIN_2, 0xa0, 0x00}
 };
 
+
 #endif
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c
index 42c86aa4dc8..7127321ace8 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c
@@ -16,8 +16,20 @@
  *
  */
 
+#include <linux/kthread.h>
 #include "m5602_s5k83a.h"
 
+static int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k83a_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k83a_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k83a_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
+static int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
+
 static struct v4l2_pix_format s5k83a_modes[] = {
 	{
 		640,
@@ -32,68 +44,77 @@ static struct v4l2_pix_format s5k83a_modes[] = {
 	}
 };
 
-const static struct ctrl s5k83a_ctrls[] = {
+static const struct ctrl s5k83a_ctrls[] = {
+#define GAIN_IDX 0
 	{
 		{
-			.id = V4L2_CID_BRIGHTNESS,
+			.id = V4L2_CID_GAIN,
 			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "brightness",
+			.name = "gain",
 			.minimum = 0x00,
 			.maximum = 0xff,
 			.step = 0x01,
-			.default_value = S5K83A_DEFAULT_BRIGHTNESS,
+			.default_value = S5K83A_DEFAULT_GAIN,
 			.flags = V4L2_CTRL_FLAG_SLIDER
 		},
-			.set = s5k83a_set_brightness,
-			.get = s5k83a_get_brightness
+			.set = s5k83a_set_gain,
+			.get = s5k83a_get_gain
 
-	}, {
+	},
+#define BRIGHTNESS_IDX 1
+	{
 		{
-			.id = V4L2_CID_WHITENESS,
+			.id = V4L2_CID_BRIGHTNESS,
 			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "whiteness",
+			.name = "brightness",
 			.minimum = 0x00,
 			.maximum = 0xff,
 			.step = 0x01,
-			.default_value = S5K83A_DEFAULT_WHITENESS,
+			.default_value = S5K83A_DEFAULT_BRIGHTNESS,
 			.flags = V4L2_CTRL_FLAG_SLIDER
 		},
-			.set = s5k83a_set_whiteness,
-			.get = s5k83a_get_whiteness,
-	}, {
+			.set = s5k83a_set_brightness,
+			.get = s5k83a_get_brightness,
+	},
+#define EXPOSURE_IDX 2
+	{
 		{
-			.id = V4L2_CID_GAIN,
+			.id = V4L2_CID_EXPOSURE,
 			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "gain",
+			.name = "exposure",
 			.minimum = 0x00,
-			.maximum = S5K83A_MAXIMUM_GAIN,
+			.maximum = S5K83A_MAXIMUM_EXPOSURE,
 			.step = 0x01,
-			.default_value = S5K83A_DEFAULT_GAIN,
+			.default_value = S5K83A_DEFAULT_EXPOSURE,
 			.flags = V4L2_CTRL_FLAG_SLIDER
 		},
-			.set = s5k83a_set_gain,
-			.get = s5k83a_get_gain
-	}, {
+			.set = s5k83a_set_exposure,
+			.get = s5k83a_get_exposure
+	},
+#define HFLIP_IDX 3
+	{
 		{
-			.id         = V4L2_CID_HFLIP,
-			.type       = V4L2_CTRL_TYPE_BOOLEAN,
-			.name       = "horizontal flip",
-			.minimum    = 0,
-			.maximum    = 1,
-			.step       = 1,
-			.default_value  = 0
+			.id = V4L2_CID_HFLIP,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "horizontal flip",
+			.minimum = 0,
+			.maximum = 1,
+			.step = 1,
+			.default_value = 0
 		},
 			.set = s5k83a_set_hflip,
 			.get = s5k83a_get_hflip
-	}, {
+	},
+#define VFLIP_IDX 4
+	{
 		{
-		 .id         = V4L2_CID_VFLIP,
-		.type       = V4L2_CTRL_TYPE_BOOLEAN,
-		.name       = "vertical flip",
-		.minimum    = 0,
-		.maximum    = 1,
-		.step       = 1,
-		.default_value  = 0
+			.id = V4L2_CID_VFLIP,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "vertical flip",
+			.minimum = 0,
+			.maximum = 1,
+			.step = 1,
+			.default_value = 0
 		},
 		.set = s5k83a_set_vflip,
 		.get = s5k83a_get_vflip
@@ -101,9 +122,14 @@ const static struct ctrl s5k83a_ctrls[] = {
 };
 
 static void s5k83a_dump_registers(struct sd *sd);
+static int s5k83a_get_rotation(struct sd *sd, u8 *reg_data);
+static int s5k83a_set_led_indication(struct sd *sd, u8 val);
+static int s5k83a_set_flip_real(struct gspca_dev *gspca_dev,
+				__s32 vflip, __s32 hflip);
 
 int s5k83a_probe(struct sd *sd)
 {
+	struct s5k83a_priv *sens_priv;
 	u8 prod_id = 0, ver_id = 0;
 	int i, err = 0;
 
@@ -145,16 +171,36 @@ int s5k83a_probe(struct sd *sd)
 		info("Detected a s5k83a sensor");
 
 sensor_found:
+	sens_priv = kmalloc(
+		sizeof(struct s5k83a_priv), GFP_KERNEL);
+	if (!sens_priv)
+		return -ENOMEM;
+
+	sens_priv->settings =
+	kmalloc(sizeof(s32)*ARRAY_SIZE(s5k83a_ctrls), GFP_KERNEL);
+	if (!sens_priv->settings)
+		return -ENOMEM;
+
 	sd->gspca_dev.cam.cam_mode = s5k83a_modes;
 	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(s5k83a_modes);
 	sd->desc->ctrls = s5k83a_ctrls;
 	sd->desc->nctrls = ARRAY_SIZE(s5k83a_ctrls);
+
+	/* null the pointer! thread is't running now */
+	sens_priv->rotation_thread = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(s5k83a_ctrls); i++)
+		sens_priv->settings[i] = s5k83a_ctrls[i].qctrl.default_value;
+
+	sd->sensor_priv = sens_priv;
 	return 0;
 }
 
 int s5k83a_init(struct sd *sd)
 {
 	int i, err = 0;
+	s32 *sensor_settings =
+			((struct s5k83a_priv *) sd->sensor_priv)->settings;
 
 	for (i = 0; i < ARRAY_SIZE(init_s5k83a) && !err; i++) {
 		u8 data[2] = {0x00, 0x00};
@@ -187,87 +233,138 @@ int s5k83a_init(struct sd *sd)
 	if (dump_sensor)
 		s5k83a_dump_registers(sd);
 
-	return (err < 0) ? err : 0;
-}
+	err = s5k83a_set_gain(&sd->gspca_dev, sensor_settings[GAIN_IDX]);
+	if (err < 0)
+		return err;
 
-int s5k83a_start(struct sd *sd)
-{
-	return s5k83a_set_led_indication(sd, 1);
-}
+	err = s5k83a_set_brightness(&sd->gspca_dev,
+				     sensor_settings[BRIGHTNESS_IDX]);
+	if (err < 0)
+		return err;
 
-int s5k83a_stop(struct sd *sd)
-{
-	return s5k83a_set_led_indication(sd, 0);
+	err = s5k83a_set_exposure(&sd->gspca_dev,
+				   sensor_settings[EXPOSURE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = s5k83a_set_hflip(&sd->gspca_dev, sensor_settings[HFLIP_IDX]);
+	if (err < 0)
+		return err;
+
+	err = s5k83a_set_vflip(&sd->gspca_dev, sensor_settings[VFLIP_IDX]);
+
+	return err;
 }
 
-int s5k83a_power_down(struct sd *sd)
+static int rotation_thread_function(void *data)
 {
+	struct sd *sd = (struct sd *) data;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
+	u8 reg, previous_rotation = 0;
+	__s32 vflip, hflip;
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	while (!schedule_timeout(100)) {
+		if (mutex_lock_interruptible(&sd->gspca_dev.usb_lock))
+			break;
+
+		s5k83a_get_rotation(sd, &reg);
+		if (previous_rotation != reg) {
+			previous_rotation = reg;
+			info("Camera was flipped");
+
+			s5k83a_get_vflip((struct gspca_dev *) sd, &vflip);
+			s5k83a_get_hflip((struct gspca_dev *) sd, &hflip);
+
+			if (reg) {
+				vflip = !vflip;
+				hflip = !hflip;
+			}
+			s5k83a_set_flip_real((struct gspca_dev *) sd,
+					      vflip, hflip);
+		}
+
+		mutex_unlock(&sd->gspca_dev.usb_lock);
+		set_current_state(TASK_INTERRUPTIBLE);
+	}
+
+	/* return to "front" flip */
+	if (previous_rotation) {
+		s5k83a_get_vflip((struct gspca_dev *) sd, &vflip);
+		s5k83a_get_hflip((struct gspca_dev *) sd, &hflip);
+		s5k83a_set_flip_real((struct gspca_dev *) sd, vflip, hflip);
+	}
+
+	sens_priv->rotation_thread = NULL;
 	return 0;
 }
 
-static void s5k83a_dump_registers(struct sd *sd)
+int s5k83a_start(struct sd *sd)
 {
-	int address;
-	u8 page, old_page;
-	m5602_read_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1);
+	int i, err = 0;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-	for (page = 0; page < 16; page++) {
-		m5602_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1);
-		info("Dumping the s5k83a register state for page 0x%x", page);
-		for (address = 0; address <= 0xff; address++) {
-			u8 val = 0;
-			m5602_read_sensor(sd, address, &val, 1);
-			info("register 0x%x contains 0x%x",
-			     address, val);
-		}
+	/* Create another thread, polling the GPIO ports of the camera to check
+	   if it got rotated. This is how the windows driver does it so we have
+	   to assume that there is no better way of accomplishing this */
+	sens_priv->rotation_thread = kthread_create(rotation_thread_function,
+						    sd, "rotation thread");
+	wake_up_process(sens_priv->rotation_thread);
+
+	/* Preinit the sensor */
+	for (i = 0; i < ARRAY_SIZE(start_s5k83a) && !err; i++) {
+		u8 data[2] = {start_s5k83a[i][2], start_s5k83a[i][3]};
+		if (start_s5k83a[i][0] == SENSOR)
+			err = m5602_write_sensor(sd, start_s5k83a[i][1],
+				data, 2);
+		else
+			err = m5602_write_bridge(sd, start_s5k83a[i][1],
+				data[0]);
 	}
-	info("s5k83a register state dump complete");
+	if (err < 0)
+		return err;
 
-	for (page = 0; page < 16; page++) {
-		m5602_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1);
-		info("Probing for which registers that are read/write "
-		      "for page 0x%x", page);
-		for (address = 0; address <= 0xff; address++) {
-			u8 old_val, ctrl_val, test_val = 0xff;
+	return s5k83a_set_led_indication(sd, 1);
+}
 
-			m5602_read_sensor(sd, address, &old_val, 1);
-			m5602_write_sensor(sd, address, &test_val, 1);
-			m5602_read_sensor(sd, address, &ctrl_val, 1);
+int s5k83a_stop(struct sd *sd)
+{
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-			if (ctrl_val == test_val)
-				info("register 0x%x is writeable", address);
-			else
-				info("register 0x%x is read only", address);
+	if (sens_priv->rotation_thread)
+		kthread_stop(sens_priv->rotation_thread);
 
-			/* Restore original val */
-			m5602_write_sensor(sd, address, &old_val, 1);
-		}
-	}
-	info("Read/write register probing complete");
-	m5602_write_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1);
+	return s5k83a_set_led_indication(sd, 0);
 }
 
-int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
+void s5k83a_disconnect(struct sd *sd)
 {
-	int err;
-	u8 data[2];
-	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, S5K83A_BRIGHTNESS, data, 2);
-	if (err < 0)
-		return err;
+	s5k83a_stop(sd);
+
+	sd->sensor = NULL;
+	kfree(sens_priv->settings);
+	kfree(sens_priv);
+}
 
-	data[1] = data[1] << 1;
-	*val = data[1];
+static int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-	return err;
+	*val = sens_priv->settings[GAIN_IDX];
+	return 0;
 }
 
-int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 data[2];
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
+
+	sens_priv->settings[GAIN_IDX] = val;
 
 	data[0] = 0x00;
 	data[1] = 0x20;
@@ -283,89 +380,69 @@ int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
 
 	/* FIXME: This is not sane, we need to figure out the composition
 		  of these registers */
-	data[0] = val >> 3; /* brightness, high 5 bits */
-	data[1] = val >> 1; /* brightness, high 7 bits */
-	err = m5602_write_sensor(sd, S5K83A_BRIGHTNESS, data, 2);
+	data[0] = val >> 3; /* gain, high 5 bits */
+	data[1] = val >> 1; /* gain, high 7 bits */
+	err = m5602_write_sensor(sd, S5K83A_GAIN, data, 2);
 
 	return err;
 }
 
-int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val)
+static int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
 {
-	int err;
-	u8 data;
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, S5K83A_WHITENESS, &data, 1);
-	if (err < 0)
-		return err;
-
-	*val = data;
-
-	return err;
+	*val = sens_priv->settings[BRIGHTNESS_IDX];
+	return 0;
 }
 
-int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 data[1];
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
+	sens_priv->settings[BRIGHTNESS_IDX] = val;
 	data[0] = val;
-	err = m5602_write_sensor(sd, S5K83A_WHITENESS, data, 1);
-
+	err = m5602_write_sensor(sd, S5K83A_BRIGHTNESS, data, 1);
 	return err;
 }
 
-int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+static int s5k83a_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
 {
-	int err;
-	u8 data[2];
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-	err = m5602_read_sensor(sd, S5K83A_GAIN, data, 2);
-	if (err < 0)
-		return err;
-
-	data[1] = data[1] & 0x3f;
-	if (data[1] > S5K83A_MAXIMUM_GAIN)
-		data[1] = S5K83A_MAXIMUM_GAIN;
-
-	*val = data[1];
-
-	return err;
+	*val = sens_priv->settings[EXPOSURE_IDX];
+	return 0;
 }
 
-int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k83a_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
 	u8 data[2];
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
+	sens_priv->settings[EXPOSURE_IDX] = val;
 	data[0] = 0;
 	data[1] = val;
-	err = m5602_write_sensor(sd, S5K83A_GAIN, data, 2);
+	err = m5602_write_sensor(sd, S5K83A_EXPOSURE, data, 2);
 	return err;
 }
 
-int s5k83a_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int s5k83a_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
 {
-	int err;
-	u8 data[1];
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-	data[0] = 0x05;
-	err = m5602_write_sensor(sd, S5K83A_PAGE_MAP, data, 1);
-	if (err < 0)
-		return err;
-
-	err = m5602_read_sensor(sd, S5K83A_FLIP, data, 1);
-	*val = (data[0] | 0x40) ? 1 : 0;
-
-	return err;
+	*val = sens_priv->settings[VFLIP_IDX];
+	return 0;
 }
 
-int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k83a_set_flip_real(struct gspca_dev *gspca_dev,
+				__s32 vflip, __s32 hflip)
 {
 	int err;
 	u8 data[1];
@@ -376,69 +453,83 @@ int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 	if (err < 0)
 		return err;
 
-	err = m5602_read_sensor(sd, S5K83A_FLIP, data, 1);
-	if (err < 0)
-		return err;
+	/* six bit is vflip, seven is hflip */
+	data[0] = S5K83A_FLIP_MASK;
+	data[0] = (vflip) ? data[0] | 0x40 : data[0];
+	data[0] = (hflip) ? data[0] | 0x80 : data[0];
 
-	/* set or zero six bit, seven is hflip */
-	data[0] = (val) ? (data[0] & 0x80) | 0x40 | S5K83A_FLIP_MASK
-			: (data[0] & 0x80) | S5K83A_FLIP_MASK;
 	err = m5602_write_sensor(sd, S5K83A_FLIP, data, 1);
 	if (err < 0)
 		return err;
 
-	data[0] = (val) ? 0x0b : 0x0a;
+	data[0] = (vflip) ? 0x0b : 0x0a;
 	err = m5602_write_sensor(sd, S5K83A_VFLIP_TUNE, data, 1);
+	if (err < 0)
+		return err;
 
+	data[0] = (hflip) ? 0x0a : 0x0b;
+	err = m5602_write_sensor(sd, S5K83A_HFLIP_TUNE, data, 1);
 	return err;
 }
 
-int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
+static int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
-	u8 data[1];
+	u8 reg;
+	__s32 hflip;
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-	data[0] = 0x05;
-	err = m5602_write_sensor(sd, S5K83A_PAGE_MAP, data, 1);
+	sens_priv->settings[VFLIP_IDX] = val;
+
+	s5k83a_get_hflip(gspca_dev, &hflip);
+
+	err = s5k83a_get_rotation(sd, &reg);
 	if (err < 0)
 		return err;
+	if (reg) {
+		val = !val;
+		hflip = !hflip;
+	}
 
-	err = m5602_read_sensor(sd, S5K83A_FLIP, data, 1);
-	*val = (data[0] | 0x80) ? 1 : 0;
-
+	err = s5k83a_set_flip_real(gspca_dev, val, hflip);
 	return err;
 }
 
-int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
+static int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
+
+	*val = sens_priv->settings[HFLIP_IDX];
+	return 0;
+}
+
+static int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 {
 	int err;
-	u8 data[1];
+	u8 reg;
+	__s32 vflip;
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct s5k83a_priv *sens_priv = sd->sensor_priv;
 
-	data[0] = 0x05;
-	err = m5602_write_sensor(sd, S5K83A_PAGE_MAP, data, 1);
-	if (err < 0)
-		return err;
+	sens_priv->settings[HFLIP_IDX] = val;
 
-	err = m5602_read_sensor(sd, S5K83A_FLIP, data, 1);
-	if (err < 0)
-		return err;
+	s5k83a_get_vflip(gspca_dev, &vflip);
 
-	/* set or zero seven bit, six is vflip */
-	data[0] = (val) ? (data[0] & 0x40) | 0x80 | S5K83A_FLIP_MASK
-			: (data[0] & 0x40) | S5K83A_FLIP_MASK;
-	err = m5602_write_sensor(sd, S5K83A_FLIP, data, 1);
+	err = s5k83a_get_rotation(sd, &reg);
 	if (err < 0)
 		return err;
+	if (reg) {
+		val = !val;
+		vflip = !vflip;
+	}
 
-	data[0] = (val) ? 0x0a : 0x0b;
-	err = m5602_write_sensor(sd, S5K83A_HFLIP_TUNE, data, 1);
-
+	err = s5k83a_set_flip_real(gspca_dev, vflip, val);
 	return err;
 }
 
-int s5k83a_set_led_indication(struct sd *sd, u8 val)
+static int s5k83a_set_led_indication(struct sd *sd, u8 val)
 {
 	int err = 0;
 	u8 data[1];
@@ -454,5 +545,55 @@ int s5k83a_set_led_indication(struct sd *sd, u8 val)
 
 	err = m5602_write_bridge(sd, M5602_XB_GPIO_DAT, data[0]);
 
-	return (err < 0) ? err : 0;
+	return err;
+}
+
+/* Get camera rotation on Acer notebooks */
+static int s5k83a_get_rotation(struct sd *sd, u8 *reg_data)
+{
+	int err = m5602_read_bridge(sd, M5602_XB_GPIO_DAT, reg_data);
+	*reg_data = (*reg_data & S5K83A_GPIO_ROTATION_MASK) ? 0 : 1;
+	return err;
+}
+
+static void s5k83a_dump_registers(struct sd *sd)
+{
+	int address;
+	u8 page, old_page;
+	m5602_read_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1);
+
+	for (page = 0; page < 16; page++) {
+		m5602_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1);
+		info("Dumping the s5k83a register state for page 0x%x", page);
+		for (address = 0; address <= 0xff; address++) {
+			u8 val = 0;
+			m5602_read_sensor(sd, address, &val, 1);
+			info("register 0x%x contains 0x%x",
+			     address, val);
+		}
+	}
+	info("s5k83a register state dump complete");
+
+	for (page = 0; page < 16; page++) {
+		m5602_write_sensor(sd, S5K83A_PAGE_MAP, &page, 1);
+		info("Probing for which registers that are read/write "
+				"for page 0x%x", page);
+		for (address = 0; address <= 0xff; address++) {
+			u8 old_val, ctrl_val, test_val = 0xff;
+
+			m5602_read_sensor(sd, address, &old_val, 1);
+			m5602_write_sensor(sd, address, &test_val, 1);
+			m5602_read_sensor(sd, address, &ctrl_val, 1);
+
+			if (ctrl_val == test_val)
+				info("register 0x%x is writeable", address);
+			else
+				info("register 0x%x is read only", address);
+
+			/* Restore original val */
+			m5602_write_sensor(sd, address, &old_val, 1);
+		}
+	}
+	info("Read/write register probing complete");
+	m5602_write_sensor(sd, S5K83A_PAGE_MAP, &old_page, 1);
 }
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h
index 819ab25272b..7814b078acd 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k83a.h
+++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h
@@ -21,20 +21,21 @@
 
 #include "m5602_sensor.h"
 
-#define S5K83A_FLIP				0x01
-#define S5K83A_HFLIP_TUNE			0x03
-#define S5K83A_VFLIP_TUNE			0x05
-#define S5K83A_WHITENESS			0x0a
-#define S5K83A_GAIN				0x18
-#define S5K83A_BRIGHTNESS			0x1b
-#define S5K83A_PAGE_MAP				0xec
-
-#define S5K83A_DEFAULT_BRIGHTNESS		0x71
-#define S5K83A_DEFAULT_WHITENESS		0x7e
-#define S5K83A_DEFAULT_GAIN			0x00
-#define S5K83A_MAXIMUM_GAIN			0x3c
-#define S5K83A_FLIP_MASK			0x10
+#define S5K83A_FLIP			0x01
+#define S5K83A_HFLIP_TUNE		0x03
+#define S5K83A_VFLIP_TUNE		0x05
+#define S5K83A_BRIGHTNESS		0x0a
+#define S5K83A_EXPOSURE			0x18
+#define S5K83A_GAIN			0x1b
+#define S5K83A_PAGE_MAP			0xec
+
+#define S5K83A_DEFAULT_GAIN		0x71
+#define S5K83A_DEFAULT_BRIGHTNESS	0x7e
+#define S5K83A_DEFAULT_EXPOSURE		0x00
+#define S5K83A_MAXIMUM_EXPOSURE		0x3c
+#define S5K83A_FLIP_MASK		0x10
 #define S5K83A_GPIO_LED_MASK		0x10
+#define S5K83A_GPIO_ROTATION_MASK 	0x40
 
 /*****************************************************************************/
 
@@ -46,20 +47,7 @@ int s5k83a_probe(struct sd *sd);
 int s5k83a_init(struct sd *sd);
 int s5k83a_start(struct sd *sd);
 int s5k83a_stop(struct sd *sd);
-int s5k83a_power_down(struct sd *sd);
-
-int s5k83a_set_led_indication(struct sd *sd, u8 val);
-
-int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
-int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k83a_set_whiteness(struct gspca_dev *gspca_dev, __s32 val);
-int s5k83a_get_whiteness(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val);
-int s5k83a_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k83a_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
-int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
-int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
+void s5k83a_disconnect(struct sd *sd);
 
 static const struct m5602_sensor s5k83a = {
 	.name = "S5K83A",
@@ -67,11 +55,18 @@ static const struct m5602_sensor s5k83a = {
 	.init = s5k83a_init,
 	.start = s5k83a_start,
 	.stop = s5k83a_stop,
-	.power_down = s5k83a_power_down,
+	.disconnect = s5k83a_disconnect,
 	.i2c_slave_id = 0x5a,
 	.i2c_regW = 2,
 };
 
+struct s5k83a_priv {
+	/* We use another thread periodically
+	   probing the orientation of the camera */
+	struct task_struct *rotation_thread;
+	s32 *settings;
+};
+
 static const unsigned char preinit_s5k83a[][4] =
 {
 	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00},
@@ -108,8 +103,6 @@ static const unsigned char preinit_s5k83a[][4] =
 	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
 	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
 	{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00},
-
-	{SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00}
 };
 
 /* This could probably be considerably shortened.
@@ -117,86 +110,8 @@ static const unsigned char preinit_s5k83a[][4] =
 */
 static const unsigned char init_s5k83a[][4] =
 {
-	{SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00},
-	{SENSOR, 0xaf, 0x01, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, 0x7b, 0xff, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	{SENSOR, 0x01, 0x50, 0x00},
-	{SENSOR, 0x12, 0x20, 0x00},
-	{SENSOR, 0x17, 0x40, 0x00},
-	{SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00},
-	{SENSOR, 0x1c, 0x00, 0x00},
-	{SENSOR, 0x02, 0x70, 0x00},
-	{SENSOR, 0x03, 0x0b, 0x00},
-	{SENSOR, 0x04, 0xf0, 0x00},
-	{SENSOR, 0x05, 0x0b, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	{SENSOR, 0x06, 0x71, 0x00},
-	{SENSOR, 0x07, 0xe8, 0x00},
-	{SENSOR, 0x08, 0x02, 0x00},
-	{SENSOR, 0x09, 0x88, 0x00},
-	{SENSOR, 0x14, 0x00, 0x00},
-	{SENSOR, 0x15, 0x20, 0x00},
-	{SENSOR, 0x19, 0x00, 0x00},
-	{SENSOR, 0x1a, 0x98, 0x00},
-	{SENSOR, 0x0f, 0x02, 0x00},
-	{SENSOR, 0x10, 0xe5, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	{SENSOR_LONG, 0x14, 0x00, 0x20},
-	{SENSOR_LONG, 0x0d, 0x00, 0x7d},
-	{SENSOR_LONG, 0x1b, 0x0d, 0x05},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x87, 0x00},
-
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
+	/* The following sequence is useless after a clean boot
+	   but is necessary after resume from suspend */
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
 	{BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00},
@@ -216,7 +131,7 @@ static const unsigned char init_s5k83a[][4] =
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
 	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00},
 	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
@@ -225,109 +140,34 @@ static const unsigned char init_s5k83a[][4] =
 
 	{SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00},
 	{SENSOR, 0xaf, 0x01, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	/* ff ( init value )is very dark) || 71 and f0 better */
+	{SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00},
 	{SENSOR, 0x7b, 0xff, 0x00},
 	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
 	{SENSOR, 0x01, 0x50, 0x00},
 	{SENSOR, 0x12, 0x20, 0x00},
 	{SENSOR, 0x17, 0x40, 0x00},
-	{SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00},
 	{SENSOR, 0x1c, 0x00, 0x00},
 	{SENSOR, 0x02, 0x70, 0x00},
-	/* some values like 0x10 give a blue-purple image */
 	{SENSOR, 0x03, 0x0b, 0x00},
 	{SENSOR, 0x04, 0xf0, 0x00},
 	{SENSOR, 0x05, 0x0b, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
-	/* under 80 don't work, highter depend on value */
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00},
-
-	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
 	{SENSOR, 0x06, 0x71, 0x00},
-	{SENSOR, 0x07, 0xe8, 0x00},
+	{SENSOR, 0x07, 0xe8, 0x00}, /* 488 */
 	{SENSOR, 0x08, 0x02, 0x00},
-	{SENSOR, 0x09, 0x88, 0x00},
+	{SENSOR, 0x09, 0x88, 0x00}, /* 648 */
 	{SENSOR, 0x14, 0x00, 0x00},
-	{SENSOR, 0x15, 0x20, 0x00},
+	{SENSOR, 0x15, 0x20, 0x00}, /* 32 */
 	{SENSOR, 0x19, 0x00, 0x00},
-	{SENSOR, 0x1a, 0x98, 0x00},
+	{SENSOR, 0x1a, 0x98, 0x00}, /* 152 */
 	{SENSOR, 0x0f, 0x02, 0x00},
-	{SENSOR, 0x10, 0xe5, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	{SENSOR_LONG, 0x14, 0x00, 0x20},
-	{SENSOR_LONG, 0x0d, 0x00, 0x7d},
-	{SENSOR_LONG, 0x1b, 0x0d, 0x05},
-
-	/* The following sequence is useless after a clean boot
-	   but is necessary after resume from suspend */
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00},
-	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00},
-	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00},
-	{BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00},
-
-	{SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00},
-	{SENSOR, 0xaf, 0x01, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00},
-	{SENSOR, 0x7b, 0xff, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	{SENSOR, 0x01, 0x50, 0x00},
-	{SENSOR, 0x12, 0x20, 0x00},
-	{SENSOR, 0x17, 0x40, 0x00},
-	{SENSOR, S5K83A_BRIGHTNESS, 0x0f, 0x00},
-	{SENSOR, 0x1c, 0x00, 0x00},
-	{SENSOR, 0x02, 0x70, 0x00},
-	{SENSOR, 0x03, 0x0b, 0x00},
-	{SENSOR, 0x04, 0xf0, 0x00},
-	{SENSOR, 0x05, 0x0b, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
+	{SENSOR, 0x10, 0xe5, 0x00}, /* 741 */
+	/* normal colors
+	(this is value after boot, but after tries can be different) */
+	{SENSOR, 0x00, 0x06, 0x00},
+};
 
+static const unsigned char start_s5k83a[][4] =
+{
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
 	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00},
@@ -340,7 +180,7 @@ static const unsigned char init_s5k83a[][4] =
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, /* 484 */
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
@@ -348,50 +188,10 @@ static const unsigned char init_s5k83a[][4] =
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, /* 639 */
 	{BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00},
-
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	{SENSOR, 0x06, 0x71, 0x00},
-	{SENSOR, 0x07, 0xe8, 0x00},
-	{SENSOR, 0x08, 0x02, 0x00},
-	{SENSOR, 0x09, 0x88, 0x00},
-	{SENSOR, 0x14, 0x00, 0x00},
-	{SENSOR, 0x15, 0x20, 0x00},
-	{SENSOR, 0x19, 0x00, 0x00},
-	{SENSOR, 0x1a, 0x98, 0x00},
-	{SENSOR, 0x0f, 0x02, 0x00},
-
-	{SENSOR, 0x10, 0xe5, 0x00},
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	{SENSOR_LONG, 0x14, 0x00, 0x20},
-	{SENSOR_LONG, 0x0d, 0x00, 0x7d},
-	{SENSOR_LONG, 0x1b, 0x0d, 0x05},
-
-	/* normal colors
-	   (this is value after boot, but after tries can be different) */
-	{SENSOR, 0x00, 0x06, 0x00},
-
-	/* set default brightness */
-	{SENSOR_LONG, 0x14, 0x00, 0x20},
-	{SENSOR_LONG, 0x0d, 0x01, 0x00},
-	{SENSOR_LONG, 0x1b, S5K83A_DEFAULT_BRIGHTNESS >> 3,
-			    S5K83A_DEFAULT_BRIGHTNESS >> 1},
-
-	/* set default whiteness */
-	{SENSOR, S5K83A_WHITENESS, S5K83A_DEFAULT_WHITENESS, 0x00},
-
-	/* set default gain */
-	{SENSOR_LONG, 0x18, 0x00, S5K83A_DEFAULT_GAIN},
-
-	/* set default flip */
-	{SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00},
-	{SENSOR, S5K83A_FLIP, 0x00 | S5K83A_FLIP_MASK, 0x00},
-	{SENSOR, S5K83A_HFLIP_TUNE, 0x0b, 0x00},
-	{SENSOR, S5K83A_VFLIP_TUNE, 0x0a, 0x00}
-
 };
 
 #endif
diff --git a/drivers/media/video/gspca/m5602/m5602_sensor.h b/drivers/media/video/gspca/m5602/m5602_sensor.h
index 0d3026936f2..edff4f1f586 100644
--- a/drivers/media/video/gspca/m5602/m5602_sensor.h
+++ b/drivers/media/video/gspca/m5602/m5602_sensor.h
@@ -21,13 +21,17 @@
 
 #include "m5602_bridge.h"
 
+#define M5602_V4L2_CID_GREEN_BALANCE	(V4L2_CID_PRIVATE_BASE + 0)
+#define M5602_V4L2_CID_NOISE_SUPPRESION	(V4L2_CID_PRIVATE_BASE + 1)
+
 /* Enumerates all supported sensors */
 enum sensors {
 	OV9650_SENSOR	= 1,
 	S5K83A_SENSOR	= 2,
 	S5K4AA_SENSOR	= 3,
 	MT9M111_SENSOR	= 4,
-	PO1030_SENSOR	= 5
+	PO1030_SENSOR	= 5,
+	OV7660_SENSOR   = 6,
 };
 
 /* Enumerates all possible instruction types */
@@ -61,9 +65,6 @@ struct m5602_sensor {
 
 	/* Executed when the device is disconnected */
 	void (*disconnect)(struct sd *sd);
-
-	/* Performs a power down sequence */
-	int (*power_down)(struct sd *sd);
 };
 
 #endif
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index 2a901a4a6f0..30132513400 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -321,6 +321,7 @@ static const struct sd_desc sd_desc = {
 /* -- module initialisation -- */
 static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x08ca, 0x0111)},
+	{USB_DEVICE(0x093a, 0x010f)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -347,8 +348,11 @@ static struct usb_driver sd_driver = {
 /* -- module insert / remove -- */
 static int __init sd_mod_init(void)
 {
-	if (usb_register(&sd_driver) < 0)
-		return -1;
+	int ret;
+
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
 	PDEBUG(D_PROBE, "registered");
 	return 0;
 }
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 1fff37b7989..188866ac6ce 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -50,6 +50,13 @@ static int i2c_detect_tries = 10;
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
+	char bridge;
+#define BRIDGE_OV511		0
+#define BRIDGE_OV511PLUS	1
+#define BRIDGE_OV518		2
+#define BRIDGE_OV518PLUS	3
+#define BRIDGE_OV519		4
+
 	/* Determined by sensor type */
 	__u8 sif;
 
@@ -87,6 +94,9 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static void setbrightness(struct gspca_dev *gspca_dev);
+static void setcontrast(struct gspca_dev *gspca_dev);
+static void setcolors(struct gspca_dev *gspca_dev);
 
 static struct ctrl sd_ctrls[] = {
 	{
@@ -164,7 +174,7 @@ static struct ctrl sd_ctrls[] = {
 	},
 };
 
-static const struct v4l2_pix_format vga_mode[] = {
+static const struct v4l2_pix_format ov519_vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 8 + 590,
@@ -176,7 +186,7 @@ static const struct v4l2_pix_format vga_mode[] = {
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
-static const struct v4l2_pix_format sif_mode[] = {
+static const struct v4l2_pix_format ov519_sif_mode[] = {
 	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 176,
 		.sizeimage = 176 * 144 * 3 / 8 + 590,
@@ -189,6 +199,47 @@ static const struct v4l2_pix_format sif_mode[] = {
 		.priv = 0},
 };
 
+static const struct v4l2_pix_format ov518_vga_mode[] = {
+	{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+};
+static const struct v4l2_pix_format ov518_sif_mode[] = {
+	{176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 40000,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1},
+	{352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0},
+};
+
+
+/* Registers common to OV511 / OV518 */
+#define R51x_SYS_RESET          	0x50
+#define R51x_SYS_INIT         		0x53
+#define R51x_SYS_SNAP			0x52
+#define R51x_SYS_CUST_ID		0x5F
+#define R51x_COMP_LUT_BEGIN		0x80
+
+/* OV511 Camera interface register numbers */
+#define R511_SYS_LED_CTL		0x55	/* OV511+ only */
+#define	OV511_RESET_NOREGS		0x3F	/* All but OV511 & regs */
+
+/* OV518 Camera interface register numbers */
+#define R518_GPIO_OUT			0x56	/* OV518(+) only */
+#define R518_GPIO_CTL			0x57	/* OV518(+) only */
+
 /* OV519 Camera interface register numbers */
 #define OV519_R10_H_SIZE		0x10
 #define OV519_R11_V_SIZE		0x11
@@ -224,6 +275,8 @@ static const struct v4l2_pix_format sif_mode[] = {
 
 /* OV7610 registers */
 #define OV7610_REG_GAIN		0x00	/* gain setting (5:0) */
+#define OV7610_REG_BLUE		0x01	/* blue channel balance */
+#define OV7610_REG_RED		0x02	/* red channel balance */
 #define OV7610_REG_SAT		0x03	/* saturation */
 #define OV8610_REG_HUE		0x04	/* 04 reserved */
 #define OV7610_REG_CNT		0x05	/* Y contrast */
@@ -846,11 +899,12 @@ static unsigned char ov7670_abs_to_sm(unsigned char v)
 static int reg_w(struct sd *sd, __u16 index, __u8 value)
 {
 	int ret;
+	int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 2 : 1;
 
 	sd->gspca_dev.usb_buf[0] = value;
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
-			1,			/* REQ_IO (ov518/519) */
+			req,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, index,
 			sd->gspca_dev.usb_buf, 1, 500);
@@ -864,10 +918,11 @@ static int reg_w(struct sd *sd, __u16 index, __u8 value)
 static int reg_r(struct sd *sd, __u16 index)
 {
 	int ret;
+	int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 3 : 1;
 
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
-			1,			/* REQ_IO */
+			req,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, index, sd->gspca_dev.usb_buf, 1, 500);
 
@@ -924,6 +979,28 @@ static int reg_w_mask(struct sd *sd,
 }
 
 /*
+ * Writes multiple (n) byte value to a single register. Only valid with certain
+ * registers (0x30 and 0xc4 - 0xce).
+ */
+static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
+{
+	int ret;
+
+	*((u32 *)sd->gspca_dev.usb_buf) = __cpu_to_le32(value);
+
+	ret = usb_control_msg(sd->gspca_dev.dev,
+			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
+			1 /* REG_IO */,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			0, index,
+			sd->gspca_dev.usb_buf, n, 500);
+	if (ret < 0)
+		PDEBUG(D_ERR, "Write reg32 [%02x] %08x failed", index, value);
+	return ret;
+}
+
+
+/*
  * The OV518 I2C I/O procedure is different, hence, this function.
  * This is normally only called from i2c_w(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
@@ -1014,20 +1091,47 @@ static inline int ov51x_stop(struct sd *sd)
 {
 	PDEBUG(D_STREAM, "stopping");
 	sd->stopped = 1;
-	return reg_w(sd, OV519_SYS_RESET1, 0x0f);
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		return reg_w(sd, R51x_SYS_RESET, 0x3d);
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
+	case BRIDGE_OV519:
+		return reg_w(sd, OV519_SYS_RESET1, 0x0f);
+	}
+
+	return 0;
 }
 
 /* Restarts OV511 after ov511_stop() is called. Has no effect if it is not
  * actually stopped (for performance). */
 static inline int ov51x_restart(struct sd *sd)
 {
+	int rc;
+
 	PDEBUG(D_STREAM, "restarting");
 	if (!sd->stopped)
 		return 0;
 	sd->stopped = 0;
 
 	/* Reinitialize the stream */
-	return reg_w(sd, OV519_SYS_RESET1, 0x00);
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		return reg_w(sd, R51x_SYS_RESET, 0x00);
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		rc = reg_w(sd, 0x2f, 0x80);
+		if (rc < 0)
+			return rc;
+		return reg_w(sd, R51x_SYS_RESET, 0x00);
+	case BRIDGE_OV519:
+		return reg_w(sd, OV519_SYS_RESET1, 0x00);
+	}
+
+	return 0;
 }
 
 /* This does an initial reset of an OmniVision sensor and ensures that I2C
@@ -1287,16 +1391,161 @@ static int ov6xx0_configure(struct sd *sd)
 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
 static void ov51x_led_control(struct sd *sd, int on)
 {
-	reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
+	switch (sd->bridge) {
+	/* OV511 has no LED control */
+	case BRIDGE_OV511PLUS:
+		reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0);
+		break;
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02);
+		break;
+	case BRIDGE_OV519:
+		reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
+		break;
+	}
 }
 
-/* this function is called at probe time */
-static int sd_config(struct gspca_dev *gspca_dev,
-			const struct usb_device_id *id)
+/* OV518 quantization tables are 8x4 (instead of 8x8) */
+static int ov518_upload_quan_tables(struct sd *sd)
+{
+	const unsigned char yQuanTable518[] = {
+		5, 4, 5, 6, 6, 7, 7, 7,
+		5, 5, 5, 5, 6, 7, 7, 7,
+		6, 6, 6, 6, 7, 7, 7, 8,
+		7, 7, 6, 7, 7, 7, 8, 8
+	};
+
+	const unsigned char uvQuanTable518[] = {
+		6, 6, 6, 7, 7, 7, 7, 7,
+		6, 6, 6, 7, 7, 7, 7, 7,
+		6, 6, 6, 7, 7, 7, 7, 8,
+		7, 7, 7, 7, 7, 7, 8, 8
+	};
+
+	const unsigned char *pYTable = yQuanTable518;
+	const unsigned char *pUVTable = uvQuanTable518;
+	unsigned char val0, val1;
+	int i, rc, reg = R51x_COMP_LUT_BEGIN;
+
+	PDEBUG(D_PROBE, "Uploading quantization tables");
+
+	for (i = 0; i < 16; i++) {
+		val0 = *pYTable++;
+		val1 = *pYTable++;
+		val0 &= 0x0f;
+		val1 &= 0x0f;
+		val0 |= val1 << 4;
+		rc = reg_w(sd, reg, val0);
+		if (rc < 0)
+			return rc;
+
+		val0 = *pUVTable++;
+		val1 = *pUVTable++;
+		val0 &= 0x0f;
+		val1 &= 0x0f;
+		val0 |= val1 << 4;
+		rc = reg_w(sd, reg + 16, val0);
+		if (rc < 0)
+			return rc;
+
+		reg++;
+	}
+
+	return 0;
+}
+
+/* This initializes the OV518/OV518+ and the sensor */
+static int ov518_configure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct cam *cam;
+	int rc;
+
+	/* For 518 and 518+ */
+	static struct ov_regvals init_518[] = {
+		{ R51x_SYS_RESET,	0x40 },
+		{ R51x_SYS_INIT,	0xe1 },
+		{ R51x_SYS_RESET,	0x3e },
+		{ R51x_SYS_INIT,	0xe1 },
+		{ R51x_SYS_RESET,	0x00 },
+		{ R51x_SYS_INIT,	0xe1 },
+		{ 0x46,			0x00 },
+		{ 0x5d,			0x03 },
+	};
+
+	static struct ov_regvals norm_518[] = {
+		{ R51x_SYS_SNAP,	0x02 }, /* Reset */
+		{ R51x_SYS_SNAP,	0x01 }, /* Enable */
+		{ 0x31, 		0x0f },
+		{ 0x5d,			0x03 },
+		{ 0x24,			0x9f },
+		{ 0x25,			0x90 },
+		{ 0x20,			0x00 },
+		{ 0x51,			0x04 },
+		{ 0x71,			0x19 },
+		{ 0x2f,			0x80 },
+	};
+
+	static struct ov_regvals norm_518_p[] = {
+		{ R51x_SYS_SNAP,	0x02 }, /* Reset */
+		{ R51x_SYS_SNAP,	0x01 }, /* Enable */
+		{ 0x31, 		0x0f },
+		{ 0x5d,			0x03 },
+		{ 0x24,			0x9f },
+		{ 0x25,			0x90 },
+		{ 0x20,			0x60 },
+		{ 0x51,			0x02 },
+		{ 0x71,			0x19 },
+		{ 0x40,			0xff },
+		{ 0x41,			0x42 },
+		{ 0x46,			0x00 },
+		{ 0x33,			0x04 },
+		{ 0x21,			0x19 },
+		{ 0x3f,			0x10 },
+		{ 0x2f,			0x80 },
+	};
+
+	/* First 5 bits of custom ID reg are a revision ID on OV518 */
+	PDEBUG(D_PROBE, "Device revision %d",
+	       0x1F & reg_r(sd, R51x_SYS_CUST_ID));
+
+	rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518));
+	if (rc < 0)
+		return rc;
+
+	/* Set LED GPIO pin to output mode */
+	rc = reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02);
+	if (rc < 0)
+		return rc;
 
+	switch (sd->bridge) {
+	case BRIDGE_OV518:
+		rc = write_regvals(sd, norm_518, ARRAY_SIZE(norm_518));
+		if (rc < 0)
+			return rc;
+		break;
+	case BRIDGE_OV518PLUS:
+		rc = write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p));
+		if (rc < 0)
+			return rc;
+		break;
+	}
+
+	rc = ov518_upload_quan_tables(sd);
+	if (rc < 0) {
+		PDEBUG(D_ERR, "Error uploading quantization tables");
+		return rc;
+	}
+
+	rc = reg_w(sd, 0x2f, 0x80);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int ov519_configure(struct sd *sd)
+{
 	static const struct ov_regvals init_519[] = {
 		{ 0x5a,  0x6d }, /* EnableSystem */
 		{ 0x53,  0x9b },
@@ -1313,8 +1562,32 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		/* windows reads 0x55 at this point*/
 	};
 
-	if (write_regvals(sd, init_519, ARRAY_SIZE(init_519)))
+	return write_regvals(sd, init_519, ARRAY_SIZE(init_519));
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam;
+	int ret = 0;
+
+	sd->bridge = id->driver_info;
+
+	switch (sd->bridge) {
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		ret = ov518_configure(gspca_dev);
+		break;
+	case BRIDGE_OV519:
+		ret = ov519_configure(sd);
+		break;
+	}
+
+	if (ret)
 		goto error;
+
 	ov51x_led_control(sd, 0);	/* turn LED off */
 
 	/* Test for 76xx */
@@ -1360,12 +1633,26 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	}
 
 	cam = &gspca_dev->cam;
-	if (!sd->sif) {
-		cam->cam_mode = vga_mode;
-		cam->nmodes = ARRAY_SIZE(vga_mode);
-	} else {
-		cam->cam_mode = sif_mode;
-		cam->nmodes = ARRAY_SIZE(sif_mode);
+	switch (sd->bridge) {
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		if (!sd->sif) {
+			cam->cam_mode = ov518_vga_mode;
+			cam->nmodes = ARRAY_SIZE(ov518_vga_mode);
+		} else {
+			cam->cam_mode = ov518_sif_mode;
+			cam->nmodes = ARRAY_SIZE(ov518_sif_mode);
+		}
+		break;
+	case BRIDGE_OV519:
+		if (!sd->sif) {
+			cam->cam_mode = ov519_vga_mode;
+			cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
+		} else {
+			cam->cam_mode = ov519_sif_mode;
+			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
+		}
+		break;
 	}
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
@@ -1422,6 +1709,106 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+/* Sets up the OV518/OV518+ with the given image parameters
+ *
+ * OV518 needs a completely different approach, until we can figure out what
+ * the individual registers do. Also, only 15 FPS is supported now.
+ *
+ * Do not put any sensor-specific code in here (including I2C I/O functions)
+ */
+static int ov518_mode_init_regs(struct sd *sd)
+{
+	int hsegs, vsegs;
+
+	/******** Set the mode ********/
+
+	reg_w(sd, 0x2b, 0);
+	reg_w(sd, 0x2c, 0);
+	reg_w(sd, 0x2d, 0);
+	reg_w(sd, 0x2e, 0);
+	reg_w(sd, 0x3b, 0);
+	reg_w(sd, 0x3c, 0);
+	reg_w(sd, 0x3d, 0);
+	reg_w(sd, 0x3e, 0);
+
+	if (sd->bridge == BRIDGE_OV518) {
+		/* Set 8-bit (YVYU) input format */
+		reg_w_mask(sd, 0x20, 0x08, 0x08);
+
+		/* Set 12-bit (4:2:0) output format */
+		reg_w_mask(sd, 0x28, 0x80, 0xf0);
+		reg_w_mask(sd, 0x38, 0x80, 0xf0);
+	} else {
+		reg_w(sd, 0x28, 0x80);
+		reg_w(sd, 0x38, 0x80);
+	}
+
+	hsegs = sd->gspca_dev.width / 16;
+	vsegs = sd->gspca_dev.height / 4;
+
+	reg_w(sd, 0x29, hsegs);
+	reg_w(sd, 0x2a, vsegs);
+
+	reg_w(sd, 0x39, hsegs);
+	reg_w(sd, 0x3a, vsegs);
+
+	/* Windows driver does this here; who knows why */
+	reg_w(sd, 0x2f, 0x80);
+
+	/******** Set the framerate (to 30 FPS) ********/
+	if (sd->bridge == BRIDGE_OV518PLUS)
+		sd->clockdiv = 1;
+	else
+		sd->clockdiv = 0;
+
+	/* Mode independent, but framerate dependent, regs */
+	reg_w(sd, 0x51, 0x04);	/* Clock divider; lower==faster */
+	reg_w(sd, 0x22, 0x18);
+	reg_w(sd, 0x23, 0xff);
+
+	if (sd->bridge == BRIDGE_OV518PLUS)
+		reg_w(sd, 0x21, 0x19);
+	else
+		reg_w(sd, 0x71, 0x17);	/* Compression-related? */
+
+	/* FIXME: Sensor-specific */
+	/* Bit 5 is what matters here. Of course, it is "reserved" */
+	i2c_w(sd, 0x54, 0x23);
+
+	reg_w(sd, 0x2f, 0x80);
+
+	if (sd->bridge == BRIDGE_OV518PLUS) {
+		reg_w(sd, 0x24, 0x94);
+		reg_w(sd, 0x25, 0x90);
+		ov518_reg_w32(sd, 0xc4,    400, 2);	/* 190h   */
+		ov518_reg_w32(sd, 0xc6,    540, 2);	/* 21ch   */
+		ov518_reg_w32(sd, 0xc7,    540, 2);	/* 21ch   */
+		ov518_reg_w32(sd, 0xc8,    108, 2);	/* 6ch    */
+		ov518_reg_w32(sd, 0xca, 131098, 3);	/* 2001ah */
+		ov518_reg_w32(sd, 0xcb,    532, 2);	/* 214h   */
+		ov518_reg_w32(sd, 0xcc,   2400, 2);	/* 960h   */
+		ov518_reg_w32(sd, 0xcd,     32, 2);	/* 20h    */
+		ov518_reg_w32(sd, 0xce,    608, 2);	/* 260h   */
+	} else {
+		reg_w(sd, 0x24, 0x9f);
+		reg_w(sd, 0x25, 0x90);
+		ov518_reg_w32(sd, 0xc4,    400, 2);	/* 190h   */
+		ov518_reg_w32(sd, 0xc6,    381, 2);	/* 17dh   */
+		ov518_reg_w32(sd, 0xc7,    381, 2);	/* 17dh   */
+		ov518_reg_w32(sd, 0xc8,    128, 2);	/* 80h    */
+		ov518_reg_w32(sd, 0xca, 183331, 3);	/* 2cc23h */
+		ov518_reg_w32(sd, 0xcb,    746, 2);	/* 2eah   */
+		ov518_reg_w32(sd, 0xcc,   1750, 2);	/* 6d6h   */
+		ov518_reg_w32(sd, 0xcd,     45, 2);	/* 2dh    */
+		ov518_reg_w32(sd, 0xce,    851, 2);	/* 353h   */
+	}
+
+	reg_w(sd, 0x2f, 0x80);
+
+	return 0;
+}
+
+
 /* Sets up the OV519 with the given image parameters
  *
  * OV519 needs a completely different approach, until we can figure out what
@@ -1740,6 +2127,11 @@ static int set_ov_sensor_window(struct sd *sd)
 		hwebase = 0x3a;
 		vwsbase = 0x05;
 		vwebase = 0x06;
+		if (qvga) {
+			/* HDG: this fixes U and V getting swapped */
+			hwsbase--;
+			vwsbase--;
+		}
 		break;
 	case SEN_OV7620:
 		hwsbase = 0x2f;		/* From 7620.SET (spec is wrong) */
@@ -1855,15 +2247,28 @@ static int set_ov_sensor_window(struct sd *sd)
 static int sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int ret;
+	int ret = 0;
 
-	ret = ov519_mode_init_regs(sd);
+	switch (sd->bridge) {
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		ret = ov518_mode_init_regs(sd);
+		break;
+	case BRIDGE_OV519:
+		ret = ov519_mode_init_regs(sd);
+		break;
+	}
 	if (ret < 0)
 		goto out;
+
 	ret = set_ov_sensor_window(sd);
 	if (ret < 0)
 		goto out;
 
+	setcontrast(gspca_dev);
+	setbrightness(gspca_dev);
+	setcolors(gspca_dev);
+
 	ret = ov51x_restart(sd);
 	if (ret < 0)
 		goto out;
@@ -1882,7 +2287,30 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	ov51x_led_control(sd, 0);
 }
 
-static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame,	/* target */
+			__u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	PDEBUG(D_STREAM, "ov518_pkt_scan: %d bytes", len);
+
+	if (len & 7) {
+		len--;
+		PDEBUG(D_STREAM, "packet number: %d\n", (int)data[len]);
+	}
+
+	/* A false positive here is likely, until OVT gives me
+	 * the definitive SOF/EOF format */
+	if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
+		gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
+		gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
+	}
+
+	/* intermediate packet */
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+}
+
+static void ov519_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
@@ -1926,6 +2354,27 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			data, len);
 }
 
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame,	/* target */
+			__u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		break;
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		ov518_pkt_scan(gspca_dev, frame, data, len);
+		break;
+	case BRIDGE_OV519:
+		ov519_pkt_scan(gspca_dev, frame, data, len);
+		break;
+	}
+}
+
 /* -- management routines -- */
 
 static void setbrightness(struct gspca_dev *gspca_dev)
@@ -1970,6 +2419,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		break;
 	case SEN_OV6630:
 		i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f);
+		break;
 	case SEN_OV8610: {
 		static const __u8 ctab[] = {
 			0x03, 0x09, 0x0b, 0x0f, 0x53, 0x6f, 0x35, 0x7f
@@ -2136,19 +2586,21 @@ static const struct sd_desc sd_desc = {
 
 /* -- module initialisation -- */
 static const __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x041e, 0x4052)},
-	{USB_DEVICE(0x041e, 0x405f)},
-	{USB_DEVICE(0x041e, 0x4060)},
-	{USB_DEVICE(0x041e, 0x4061)},
-	{USB_DEVICE(0x041e, 0x4064)},
-	{USB_DEVICE(0x041e, 0x4068)},
-	{USB_DEVICE(0x045e, 0x028c)},
-	{USB_DEVICE(0x054c, 0x0154)},
-	{USB_DEVICE(0x054c, 0x0155)},
-	{USB_DEVICE(0x05a9, 0x0519)},
-	{USB_DEVICE(0x05a9, 0x0530)},
-	{USB_DEVICE(0x05a9, 0x4519)},
-	{USB_DEVICE(0x05a9, 0x8519)},
+	{USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
+	{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS },
 	{}
 };
 
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 19e0bc60de1..4b528b37291 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -60,10 +60,23 @@ struct sd {
 static struct ctrl sd_ctrls[] = {
 };
 
-static const struct v4l2_pix_format vga_mode[] = {
+static const struct v4l2_pix_format vga_yuyv_mode[] = {
 	{640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
 	 .bytesperline = 640 * 2,
 	 .sizeimage = 640 * 480 * 2,
+	 .colorspace = V4L2_COLORSPACE_SRGB,
+	 .priv = 0},
+};
+
+static const struct v4l2_pix_format vga_jpeg_mode[] = {
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	 .bytesperline = 320,
+	 .sizeimage = 320 * 240 * 3 / 8 + 590,
+	 .colorspace = V4L2_COLORSPACE_JPEG,
+	 .priv = 1},
+	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	 .bytesperline = 640,
+	 .sizeimage = 640 * 480 * 3 / 8 + 590,
 	 .colorspace = V4L2_COLORSPACE_JPEG,
 	 .priv = 0},
 };
@@ -244,7 +257,7 @@ static const u8 bridge_init_ov965x[][2] = {
 };
 
 static const u8 sensor_init_ov965x[][2] = {
-	{0x12, 0x80},	/* com7 - reset */
+	{0x12, 0x80},	/* com7 - SSCB reset */
 	{0x00, 0x00},	/* gain */
 	{0x01, 0x80},	/* blue */
 	{0x02, 0x80},	/* red */
@@ -254,10 +267,10 @@ static const u8 sensor_init_ov965x[][2] = {
 	{0x0e, 0x61},	/* com5 */
 	{0x0f, 0x42},	/* com6 */
 	{0x11, 0x00},	/* clkrc */
-	{0x12, 0x02},	/* com7 */
+	{0x12, 0x02},	/* com7 - 15fps VGA YUYV */
 	{0x13, 0xe7},	/* com8 - everything (AGC, AWB and AEC) */
 	{0x14, 0x28},	/* com9 */
-	{0x16, 0x24},	/* rsvd16 */
+	{0x16, 0x24},	/* reg16 */
 	{0x17, 0x1d},	/* hstart*/
 	{0x18, 0xbd},	/* hstop */
 	{0x19, 0x01},	/* vstrt */
@@ -269,24 +282,24 @@ static const u8 sensor_init_ov965x[][2] = {
 	{0x27, 0x08},	/* bbias */
 	{0x28, 0x08},	/* gbbias */
 	{0x29, 0x15},	/* gr com */
-	{0x2a, 0x00},
-	{0x2b, 0x00},
+	{0x2a, 0x00},	/* exhch */
+	{0x2b, 0x00},	/* exhcl */
 	{0x2c, 0x08},	/* rbias */
 	{0x32, 0xff},	/* href */
 	{0x33, 0x00},	/* chlf */
-	{0x34, 0x3f},	/* arblm */
-	{0x35, 0x00},	/* rsvd35 */
-	{0x36, 0xf8},	/* rsvd36 */
-	{0x38, 0x72},	/* acom38 */
-	{0x39, 0x57},	/* ofon */
-	{0x3a, 0x80},	/* tslb */
-	{0x3b, 0xc4},
+	{0x34, 0x3f},	/* aref1 */
+	{0x35, 0x00},	/* aref2 */
+	{0x36, 0xf8},	/* aref3 */
+	{0x38, 0x72},	/* adc2 */
+	{0x39, 0x57},	/* aref4 */
+	{0x3a, 0x80},	/* tslb - yuyv */
+	{0x3b, 0xc4},	/* com11 - night mode 1/4 frame rate */
 	{0x3d, 0x99},	/* com13 */
-	{0x3f, 0xc1},
+	{0x3f, 0xc1},	/* edge */
 	{0x40, 0xc0},	/* com15 */
 	{0x41, 0x40},	/* com16 */
-	{0x42, 0xc0},
-	{0x43, 0x0a},
+	{0x42, 0xc0},	/* com17 */
+	{0x43, 0x0a},	/* rsvd */
 	{0x44, 0xf0},
 	{0x45, 0x46},
 	{0x46, 0x62},
@@ -297,22 +310,22 @@ static const u8 sensor_init_ov965x[][2] = {
 	{0x4c, 0x7f},
 	{0x4d, 0x7f},
 	{0x4e, 0x7f},
-	{0x4f, 0x98},
+	{0x4f, 0x98},	/* matrix */
 	{0x50, 0x98},
 	{0x51, 0x00},
 	{0x52, 0x28},
 	{0x53, 0x70},
 	{0x54, 0x98},
-	{0x58, 0x1a},
-	{0x59, 0x85},
+	{0x58, 0x1a},	/* matrix coef sign */
+	{0x59, 0x85},	/* AWB control */
 	{0x5a, 0xa9},
 	{0x5b, 0x64},
 	{0x5c, 0x84},
 	{0x5d, 0x53},
 	{0x5e, 0x0e},
-	{0x5f, 0xf0},
-	{0x60, 0xf0},
-	{0x61, 0xf0},
+	{0x5f, 0xf0},	/* AWB blue limit */
+	{0x60, 0xf0},	/* AWB red limit */
+	{0x61, 0xf0},	/* AWB green limit */
 	{0x62, 0x00},	/* lcc1 */
 	{0x63, 0x00},	/* lcc2 */
 	{0x64, 0x02},	/* lcc3 */
@@ -324,15 +337,15 @@ static const u8 sensor_init_ov965x[][2] = {
 	{0x6d, 0x55},
 	{0x6e, 0x00},
 	{0x6f, 0x9d},
-	{0x70, 0x21},
+	{0x70, 0x21},	/* dnsth */
 	{0x71, 0x78},
-	{0x72, 0x00},
-	{0x73, 0x01},
-	{0x74, 0x3a},
-	{0x75, 0x35},
+	{0x72, 0x00},	/* poidx */
+	{0x73, 0x01},	/* pckdv */
+	{0x74, 0x3a},	/* xindx */
+	{0x75, 0x35},	/* yindx */
 	{0x76, 0x01},
 	{0x77, 0x02},
-	{0x7a, 0x12},
+	{0x7a, 0x12},	/* gamma curve */
 	{0x7b, 0x08},
 	{0x7c, 0x16},
 	{0x7d, 0x30},
@@ -349,33 +362,33 @@ static const u8 sensor_init_ov965x[][2] = {
 	{0x88, 0xe6},
 	{0x89, 0xf2},
 	{0x8a, 0x03},
-	{0x8c, 0x89},
+	{0x8c, 0x89},	/* com19 */
 	{0x14, 0x28},	/* com9 */
 	{0x90, 0x7d},
 	{0x91, 0x7b},
-	{0x9d, 0x03},
-	{0x9e, 0x04},
+	{0x9d, 0x03},	/* lcc6 */
+	{0x9e, 0x04},	/* lcc7 */
 	{0x9f, 0x7a},
 	{0xa0, 0x79},
 	{0xa1, 0x40},	/* aechm */
-	{0xa4, 0x50},
+	{0xa4, 0x50},	/* com21 */
 	{0xa5, 0x68},	/* com26 */
-	{0xa6, 0x4a},
-	{0xa8, 0xc1},	/* acoma8 */
-	{0xa9, 0xef},	/* acoma9 */
+	{0xa6, 0x4a},	/* AWB green */
+	{0xa8, 0xc1},	/* refa8 */
+	{0xa9, 0xef},	/* refa9 */
 	{0xaa, 0x92},
 	{0xab, 0x04},
-	{0xac, 0x80},
+	{0xac, 0x80},	/* black level control */
 	{0xad, 0x80},
 	{0xae, 0x80},
 	{0xaf, 0x80},
 	{0xb2, 0xf2},
 	{0xb3, 0x20},
-	{0xb4, 0x20},
+	{0xb4, 0x20},	/* ctrlb4 */
 	{0xb5, 0x00},
 	{0xb6, 0xaf},
 	{0xbb, 0xae},
-	{0xbc, 0x7f},
+	{0xbc, 0x7f},	/* ADC channel offsets */
 	{0xdb, 0x7f},
 	{0xbe, 0x7f},
 	{0xbf, 0x7f},
@@ -384,7 +397,7 @@ static const u8 sensor_init_ov965x[][2] = {
 	{0xc2, 0x01},
 	{0xc3, 0x4e},
 	{0xc6, 0x85},
-	{0xc7, 0x80},
+	{0xc7, 0x80},	/* com24 */
 	{0xc9, 0xe0},
 	{0xca, 0xe8},
 	{0xcb, 0xf0},
@@ -399,11 +412,11 @@ static const u8 sensor_init_ov965x[][2] = {
 	{0x58, 0x1a},
 	{0xff, 0x41},	/* read 41, write ff 00 */
 	{0x41, 0x40},	/* com16 */
-	{0xc5, 0x03},
-	{0x6a, 0x02},
+	{0xc5, 0x03},	/* 60 Hz banding filter */
+	{0x6a, 0x02},	/* 50 Hz banding filter */
 
-	{0x12, 0x62},	/* com7 - VGA + CIF */
-	{0x36, 0xfa},	/* rsvd36 */
+	{0x12, 0x62},	/* com7 - 30fps VGA YUV */
+	{0x36, 0xfa},	/* aref3 */
 	{0x69, 0x0a},	/* hv */
 	{0x8c, 0x89},	/* com22 */
 	{0x14, 0x28},	/* com9 */
@@ -442,8 +455,8 @@ static const u8 bridge_init_ov965x_2[][2] = {
 	{0x52, 0x3c},
 	{0x53, 0x00},
 	{0x54, 0x00},
-	{0x55, 0x00},
-	{0x57, 0x00},
+	{0x55, 0x00},	/* brightness */
+	{0x57, 0x00},	/* contrast 2 */
 	{0x5c, 0x00},
 	{0x5a, 0xa0},
 	{0x5b, 0x78},
@@ -489,9 +502,66 @@ static const u8 sensor_init_ov965x_2[][2] = {
 	{0x13, 0xe7},	/* com8 - everything (AGC, AWB and AEC) */
 };
 
+static const u8 sensor_start_ov965x[][2] = {
+	{0x12, 0x62},	/* com7 - 30fps VGA YUV */
+	{0x36, 0xfa},	/* aref3 */
+	{0x69, 0x0a},	/* hv */
+	{0x8c, 0x89},	/* com22 */
+	{0x14, 0x28},	/* com9 */
+	{0x3e, 0x0c},	/* com14 */
+	{0x41, 0x40},	/* com16 */
+	{0x72, 0x00},
+	{0x73, 0x00},
+	{0x74, 0x3a},
+	{0x75, 0x35},
+	{0x76, 0x01},
+	{0xc7, 0x80},	/* com24 */
+	{0x03, 0x12},	/* vref */
+	{0x17, 0x16},	/* hstart */
+	{0x18, 0x02},	/* hstop */
+	{0x19, 0x01},	/* vstrt */
+	{0x1a, 0x3d},	/* vstop */
+	{0x32, 0xff},	/* href */
+	{0xc0, 0xaa},
+	{}
+};
+
 static const u8 bridge_start_ov965x[][2] = {
+	{0x94, 0xaa},
+	{0xf1, 0x60},
+	{0xe5, 0x04},
+	{0xc0, 0x50},
+	{0xc1, 0x3c},
+	{0x8c, 0x00},
+	{0x8d, 0x1c},
+	{0x34, 0x05},
+	{}
+};
+
+static const u8 bridge_start_ov965x_vga[][2] = {
+	{0xc2, 0x0c},
+	{0xc3, 0xf9},
+	{0xda, 0x01},
+	{0x50, 0x00},
+	{0x51, 0xa0},
+	{0x52, 0x3c},
+	{0x53, 0x00},
+	{0x54, 0x00},
+	{0x55, 0x00},
+	{0x57, 0x00},
+	{0x5c, 0x00},
+	{0x5a, 0xa0},
+	{0x5b, 0x78},
+	{0x35, 0x02},
+	{0xd9, 0x10},
+	{0x94, 0x11},
+	{}
+};
+
+static const u8 bridge_start_ov965x_cif[][2] = {
 	{0xc2, 0x4c},
 	{0xc3, 0xf9},
+	{0xda, 0x00},
 	{0x50, 0x00},
 	{0x51, 0xa0},
 	{0x52, 0x78},
@@ -500,30 +570,54 @@ static const u8 bridge_start_ov965x[][2] = {
 	{0x55, 0x00},
 	{0x57, 0x00},
 	{0x5c, 0x00},
-	{0x5a, 0x28},
-	{0x5b, 0x1e},
-	{0x35, 0x00},
-	{0xd9, 0x21},
+	{0x5a, 0x50},
+	{0x5b, 0x3c},
+	{0x35, 0x02},
+	{0xd9, 0x10},
 	{0x94, 0x11},
+	{}
 };
 
-static const u8 sensor_start_ov965x[][2] = {
-	{0x3b, 0xe4},
+static const u8 sensor_start_ov965x_vga[][2] = {
+	{0x3b, 0xc4},	/* com11 - night mode 1/4 frame rate */
+	{0x1e, 0x04},	/* mvfp */
+	{0x13, 0xe0},	/* com8 */
+	{0x00, 0x00},
+	{0x13, 0xe7},	/* com8 - everything (AGC, AWB and AEC) */
+	{0x11, 0x03},	/* clkrc */
+	{0x6b, 0x5a},	/* dblv */
+	{0x6a, 0x05},	/* 50 Hz banding filter */
+	{0xc5, 0x07},	/* 60 Hz banding filter */
+	{0xa2, 0x4b},	/* bd50 */
+	{0xa3, 0x3e},	/* bd60 */
+
+	{0x2d, 0x00},	/* advfl */
+	{}
+};
+
+static const u8 sensor_start_ov965x_cif[][2] = {
+	{0x3b, 0xe4},	/* com11 - night mode 1/4 frame rate */
 	{0x1e, 0x04},	/* mvfp */
 	{0x13, 0xe0},	/* com8 */
 	{0x00, 0x00},
 	{0x13, 0xe7},	/* com8 - everything (AGC, AWB and AEC) */
 	{0x11, 0x01},	/* clkrc */
 	{0x6b, 0x5a},	/* dblv */
-	{0x6a, 0x02},
-	{0xc5, 0x03},
-	{0xa2, 0x96},
-	{0xa3, 0x7d},
+	{0x6a, 0x02},	/* 50 Hz banding filter */
+	{0xc5, 0x03},	/* 60 Hz banding filter */
+	{0xa2, 0x96},	/* bd50 */
+	{0xa3, 0x7d},	/* bd60 */
+
 	{0xff, 0x13},	/* read 13, write ff 00 */
 	{0x13, 0xe7},
-	{0x3a, 0x80},
+	{0x3a, 0x80},	/* tslb - yuyv */
+	{}
+};
+
+static const u8 sensor_start_ov965x_2[][2] = {
 	{0xff, 0x42},	/* read 42, write ff 00 */
-	{0x42, 0xc1},
+	{0x42, 0xc1},	/* com17 - 50 Hz filter */
+	{}
 };
 
 
@@ -705,11 +799,17 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	cam = &gspca_dev->cam;
 
-	cam->cam_mode = vga_mode;
-	cam->nmodes = ARRAY_SIZE(vga_mode);
+	if (sd->sensor == SENSOR_OV772X) {
+		cam->cam_mode = vga_yuyv_mode;
+		cam->nmodes = ARRAY_SIZE(vga_yuyv_mode);
 
-	cam->bulk_size = 16384;
-	cam->bulk_nurbs = 2;
+		cam->bulk = 1;
+		cam->bulk_size = 16384;
+		cam->bulk_nurbs = 2;
+	} else {		/* ov965x */
+		cam->cam_mode = vga_jpeg_mode;
+		cam->nmodes = ARRAY_SIZE(vga_jpeg_mode);
+	}
 
 	return 0;
 }
@@ -778,6 +878,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 static int sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	int mode;
 
 	switch (sd->sensor) {
 	case SENSOR_OV772X:
@@ -786,13 +887,28 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		break;
 	default:
 /*	case SENSOR_OV965X: */
-		reg_w_array(gspca_dev, bridge_start_ov965x,
-				ARRAY_SIZE(bridge_start_ov965x));
+
 		sccb_w_array(gspca_dev, sensor_start_ov965x,
 				ARRAY_SIZE(sensor_start_ov965x));
+		reg_w_array(gspca_dev, bridge_start_ov965x,
+				ARRAY_SIZE(bridge_start_ov965x));
+		mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+		if (mode != 0) {	/* 320x240 */
+			reg_w_array(gspca_dev, bridge_start_ov965x_cif,
+					ARRAY_SIZE(bridge_start_ov965x_cif));
+			sccb_w_array(gspca_dev, sensor_start_ov965x_cif,
+					ARRAY_SIZE(sensor_start_ov965x_cif));
+		} else {		/* 640x480 */
+			reg_w_array(gspca_dev, bridge_start_ov965x_vga,
+					ARRAY_SIZE(bridge_start_ov965x_vga));
+			sccb_w_array(gspca_dev, sensor_start_ov965x_vga,
+					ARRAY_SIZE(sensor_start_ov965x_vga));
+		}
+		sccb_w_array(gspca_dev, sensor_start_ov965x_2,
+				ARRAY_SIZE(sensor_start_ov965x_2));
+		ov534_reg_write(gspca_dev, 0xe0, 0x00);
 		ov534_reg_write(gspca_dev, 0xe0, 0x00);
 		ov534_set_led(gspca_dev, 1);
-/*fixme: other sensor start omitted*/
 	}
 	return 0;
 }
@@ -832,9 +948,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame,
 	__u32 this_pts;
 	u16 this_fid;
 	int remaining_len = len;
+	int payload_len;
 
+	payload_len = gspca_dev->cam.bulk ? 2048 : 2040;
 	do {
-		len = min(remaining_len, 2040);		/*fixme: was 2048*/
+		len = min(remaining_len, payload_len);
 
 		/* Payloads are prefixed with a UVC-style header.  We
 		   consider a frame to start when the FID toggles, or the PTS
@@ -864,30 +982,27 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame,
 
 		/* If PTS or FID has changed, start a new frame. */
 		if (this_pts != sd->last_pts || this_fid != sd->last_fid) {
-			gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-					NULL, 0);
+			if (gspca_dev->last_packet_type == INTER_PACKET)
+				frame = gspca_frame_add(gspca_dev,
+							LAST_PACKET, frame,
+							NULL, 0);
 			sd->last_pts = this_pts;
 			sd->last_fid = this_fid;
-		}
-
-		/* Add the data from this payload */
-		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+			gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
 					data + 12, len - 12);
-
 		/* If this packet is marked as EOF, end the frame */
-		if (data[1] & UVC_STREAM_EOF) {
+		} else if (data[1] & UVC_STREAM_EOF) {
 			sd->last_pts = 0;
-
-			if (frame->data_end - frame->data !=
-			    gspca_dev->width * gspca_dev->height * 2) {
-				PDEBUG(D_PACK, "short frame");
-				goto discard;
-			}
-
 			frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
-						NULL, 0);
+						data + 12, len - 12);
+		} else {
+
+			/* Add the data from this payload */
+			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+						data + 12, len - 12);
 		}
 
+
 		/* Done this payload */
 		goto scan_next;
 
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 153d0a91d4b..cf3af8de6e9 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -877,6 +877,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->cam_mode = sif_mode;
 		cam->nmodes = ARRAY_SIZE(sif_mode);
 	}
+	cam->npkt = 36;			/* 36 packets per ISOC message */
+
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->gain = GAIN_DEF;
 	sd->exposure = EXPOSURE_DEF;
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index c72e19d3ac3..dc6a6f11354 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -62,7 +62,6 @@ struct sd {
 #define BRIDGE_SN9C105 1
 #define BRIDGE_SN9C110 2
 #define BRIDGE_SN9C120 3
-#define BRIDGE_SN9C325 4
 	u8 sensor;			/* Type of image sensor chip */
 #define SENSOR_HV7131R 0
 #define SENSOR_MI0360 1
@@ -354,9 +353,9 @@ static const u8 sn_ov7648[0x1c] = {
 
 static const u8 sn_ov7660[0x1c] = {
 /*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
-	0x00,	0x61,	0x40,	0x00,	0x1a,	0x20,	0x20,	0x20,
+	0x00,	0x61,	0x40,	0x00,	0x1a,	0x00,	0x00,	0x00,
 /*	reg8	reg9	rega	regb	regc	regd	rege	regf */
-	0x81,	0x21,	0x07,	0x00,	0x00,	0x00,	0x00,	0x10,
+	0x81,	0x21,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
 /*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
 	0x03,	0x00,	0x01,	0x01,	0x08,	0x28,	0x1e,	0x20,
 /*	reg18	reg19	reg1a	reg1b */
@@ -757,6 +756,7 @@ static const u8 ov7660_sensor_init[][8] = {
 	{0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */
 	{0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */
 	{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */
+	{0xb1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
 /****** (some exchanges in the win trace) ******/
 	{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */
 						/* bits[3..0]reserved */
@@ -1065,9 +1065,9 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	const u8 *reg9a;
 	static const u8 reg9a_def[] =
-		{0x08, 0x40, 0x20, 0x10, 0x00, 0x04};
-	static const u8 reg9a_sn9c325[] =
-		{0x0a, 0x40, 0x38, 0x30, 0x00, 0x20};
+		{0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
+	static const u8 reg9a_spec[] =
+		{0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
 	static const u8 regd4[] = {0x60, 0x00, 0x00};
 
 	reg_w1(gspca_dev, 0xf1, 0x00);
@@ -1077,9 +1077,10 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 	reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
 	reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
 	reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);	/* jfm len was 3 */
-	switch (sd->bridge) {
-	case BRIDGE_SN9C325:
-		reg9a = reg9a_sn9c325;
+	switch (sd->sensor) {
+	case SENSOR_OV7660:
+	case SENSOR_SP80708:
+		reg9a = reg9a_spec;
 		break;
 	default:
 		reg9a = reg9a_def;
@@ -1104,7 +1105,6 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 		reg_w1(gspca_dev, 0x17, 0x64);
 		reg_w1(gspca_dev, 0x01, 0x42);
 		break;
-/*jfm: from win trace */
 	case SENSOR_OV7630:
 		reg_w1(gspca_dev, 0x01, 0x61);
 		reg_w1(gspca_dev, 0x17, 0xe2);
@@ -1114,18 +1114,15 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 	case SENSOR_OV7648:
 		reg_w1(gspca_dev, 0x01, 0x63);
 		reg_w1(gspca_dev, 0x17, 0x20);
+		reg_w1(gspca_dev, 0x01, 0x62);
 		reg_w1(gspca_dev, 0x01, 0x42);
 		break;
-/*jfm: from win trace */
 	case SENSOR_OV7660:
-		if (sd->bridge == BRIDGE_SN9C120) {
-			reg_w1(gspca_dev, 0x01, 0x61);
-			reg_w1(gspca_dev, 0x17, 0x20);
-			reg_w1(gspca_dev, 0x01, 0x60);
-			reg_w1(gspca_dev, 0x01, 0x40);
-			break;
-		}
-		/* fall thru */
+		reg_w1(gspca_dev, 0x01, 0x61);
+		reg_w1(gspca_dev, 0x17, 0x20);
+		reg_w1(gspca_dev, 0x01, 0x60);
+		reg_w1(gspca_dev, 0x01, 0x40);
+		break;
 	case SENSOR_SP80708:
 		reg_w1(gspca_dev, 0x01, 0x63);
 		reg_w1(gspca_dev, 0x17, 0x20);
@@ -1134,6 +1131,9 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 		mdelay(100);
 		reg_w1(gspca_dev, 0x02, 0x62);
 		break;
+/*	case SENSOR_HV7131R: */
+/*	case SENSOR_MI0360: */
+/*	case SENSOR_MO4000: */
 	default:
 		reg_w1(gspca_dev, 0x01, 0x43);
 		reg_w1(gspca_dev, 0x17, 0x61);
@@ -1280,6 +1280,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	cam = &gspca_dev->cam;
 	cam->cam_mode = vga_mode;
 	cam->nmodes = ARRAY_SIZE(vga_mode);
+	cam->npkt = 24;			/* 24 packets per ISOC message */
 
 	sd->bridge = id->driver_info >> 16;
 	sd->sensor = id->driver_info >> 8;
@@ -1683,13 +1684,9 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_OV7648:
 		reg17 = 0x20;
 		break;
-/*jfm: from win trace */
 	case SENSOR_OV7660:
-		if (sd->bridge == BRIDGE_SN9C120) {
-			reg17 = 0xa0;
-			break;
-		}
-		/* fall thru */
+		reg17 = 0xa0;
+		break;
 	default:
 		reg17 = 0x60;
 		break;
@@ -1714,16 +1711,17 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		reg_w1(gspca_dev, 0x9a, 0x0a);
 		reg_w1(gspca_dev, 0x99, 0x60);
 		break;
+	case SENSOR_OV7660:
+		reg_w1(gspca_dev, 0x9a, 0x05);
+		if (sd->bridge == BRIDGE_SN9C105)
+			reg_w1(gspca_dev, 0x99, 0xff);
+		else
+			reg_w1(gspca_dev, 0x99, 0x5b);
+		break;
 	case SENSOR_SP80708:
 		reg_w1(gspca_dev, 0x9a, 0x05);
 		reg_w1(gspca_dev, 0x99, 0x59);
 		break;
-	case SENSOR_OV7660:
-		if (sd->bridge == BRIDGE_SN9C120) {
-			reg_w1(gspca_dev, 0x9a, 0x05);
-			break;
-		}
-		/* fall thru */
 	default:
 		reg_w1(gspca_dev, 0x9a, 0x08);
 		reg_w1(gspca_dev, 0x99, 0x59);
@@ -2193,6 +2191,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0471, 0x0328), BSI(SN9C105, MI0360, 0x5d)},
 	{USB_DEVICE(0x0471, 0x0330), BSI(SN9C105, MI0360, 0x5d)},
 	{USB_DEVICE(0x06f8, 0x3004), BSI(SN9C105, OV7660, 0x21)},
+	{USB_DEVICE(0x06f8, 0x3008), BSI(SN9C105, OV7660, 0x21)},
 	{USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, HV7131R, 0x11)},
 /* bw600.inf:
 	{USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, MI0360, 0x5d)}, */
@@ -2211,7 +2210,12 @@ static const __devinitdata struct usb_device_id device_table[] = {
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x21)},
 #endif
+	{USB_DEVICE(0x0c45, 0x6100), BSI(SN9C120, MI0360, 0x5d)}, /*sn9c128*/
 /*	{USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x610a), BSI(SN9C120, OV7648, 0x21)}, /*sn9c128*/
+	{USB_DEVICE(0x0c45, 0x610b), BSI(SN9C120, OV7660, 0x21)}, /*sn9c128*/
+	{USB_DEVICE(0x0c45, 0x610c), BSI(SN9C120, HV7131R, 0x11)}, /*sn9c128*/
+	{USB_DEVICE(0x0c45, 0x610e), BSI(SN9C120, OV7630, 0x21)}, /*sn9c128*/
 /*	{USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */
 /*	{USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */
 	{USB_DEVICE(0x0c45, 0x6128), BSI(SN9C110, OM6802, 0x21)}, /*sn9c325?*/
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 6f38fa6d86b..8806b2ff82b 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -32,9 +32,6 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
-	__u8 packet[ISO_MAX_SIZE + 128];
-				 /* !! no more than 128 ff in an ISO packet */
-
 	unsigned char brightness;
 	unsigned char contrast;
 	unsigned char colors;
@@ -906,7 +903,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i;
-	__u8 *s, *d;
 	static __u8 ffd9[] = {0xff, 0xd9};
 
 /* frames are jpeg 4.1.1 without 0xff escape */
@@ -930,22 +926,19 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	}
 
 	/* add 0x00 after 0xff */
-	for (i = len; --i >= 0; )
-		if (data[i] == 0xff)
-			break;
-	if (i < 0) {			/* no 0xff */
-		gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
-		return;
-	}
-	s = data;
-	d = sd->packet;
-	for (i = 0; i < len; i++) {
-		*d++ = *s++;
-		if (s[-1] == 0xff)
-			*d++ = 0x00;
-	}
-	gspca_frame_add(gspca_dev, INTER_PACKET, frame,
-			sd->packet, d - sd->packet);
+	i = 0;
+	do {
+		if (data[i] == 0xff) {
+			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+					data, i + 1);
+			len -= i;
+			data += i;
+			*data = 0x00;
+			i = 0;
+		}
+		i++;
+	} while (i < len);
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index 2acec58b1b9..ea8c9fe2e96 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -637,19 +637,19 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->nmodes = ARRAY_SIZE(vga_mode) - 1;
 	sd->brightness = BRIGHTNESS_DEF;
 
-	if (sd->subtype == Nxultra) {
-		if (write_vector(gspca_dev, spca505b_init_data))
-			return -EIO;
-	} else {
-		if (write_vector(gspca_dev, spca505_init_data))
-			return -EIO;
-	}
 	return 0;
 }
 
 /* this function is called at probe and resume time */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (write_vector(gspca_dev,
+			 sd->subtype == Nxultra
+				? spca505b_init_data
+				: spca505_init_data))
+		return -EIO;
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index adacf843766..2ed2669bac3 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -1,7 +1,7 @@
 /*
  * SPCA508 chip based cameras subdriver
  *
- * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ * Copyright (C) 2009 Jean-Francois Moine <http://moinejf.free.fr>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -30,9 +30,9 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
-	unsigned char brightness;
+	u8 brightness;
 
-	char subtype;
+	u8 subtype;
 #define CreativeVista 0
 #define HamaUSBSightcam 1
 #define HamaUSBSightcam2 2
@@ -86,58 +86,34 @@ static const struct v4l2_pix_format sif_mode[] = {
 };
 
 /* Frame packet header offsets for the spca508 */
-#define SPCA508_OFFSET_TYPE 1
-#define SPCA508_OFFSET_COMPRESS 2
-#define SPCA508_OFFSET_FRAMSEQ 8
-#define SPCA508_OFFSET_WIN1LUM 11
 #define SPCA508_OFFSET_DATA 37
 
-#define SPCA508_SNAPBIT 0x20
-#define SPCA508_SNAPCTRL 0x40
-/*************** I2c ****************/
-#define SPCA508_INDEX_I2C_BASE 0x8800
-
 /*
  * Initialization data: this is the first set-up data written to the
  * device (before the open data).
  */
 static const u16 spca508_init_data[][2] =
 {
-	/*  line   URB      value, index */
-	/* 44274  1804 */ {0x0000, 0x870b},
-
-	/* 44299  1805 */ {0x0020, 0x8112},
-	/* Video drop enable, ISO streaming disable */
-	/* 44324  1806 */ {0x0003, 0x8111},
-	/* Reset compression & memory */
-	/* 44349  1807 */ {0x0000, 0x8110},
-	/* Disable all outputs */
-	/* 44372  1808 */ /* READ {0x0000, 0x8114} -> 0000: 00  */
-	/* 44398  1809 */ {0x0000, 0x8114},
-	/* SW GPIO data */
-	/* 44423  1810 */ {0x0008, 0x8110},
-	/* Enable charge pump output */
-	/* 44527  1811 */ {0x0002, 0x8116},
-	/* 200 kHz pump clock */
-	/* 44555  1812 */
-		/* UNKNOWN DIRECTION (URB_FUNCTION_SELECT_INTERFACE:) */
-	/* 44590  1813 */ {0x0003, 0x8111},
-	/* Reset compression & memory */
-	/* 44615  1814 */ {0x0000, 0x8111},
-	/* Normal mode (not reset) */
-	/* 44640  1815 */ {0x0098, 0x8110},
-	/* Enable charge pump output, sync.serial,external 2x clock */
-	/* 44665  1816 */ {0x000d, 0x8114},
-	/* SW GPIO data */
-	/* 44690  1817 */ {0x0002, 0x8116},
-	/* 200 kHz pump clock */
-	/* 44715  1818 */ {0x0020, 0x8112},
-	/* Video drop enable, ISO streaming disable */
+	{0x0000, 0x870b},
+
+	{0x0020, 0x8112},	/* Video drop enable, ISO streaming disable */
+	{0x0003, 0x8111},	/* Reset compression & memory */
+	{0x0000, 0x8110},	/* Disable all outputs */
+	/* READ {0x0000, 0x8114} -> 0000: 00  */
+	{0x0000, 0x8114},	/* SW GPIO data */
+	{0x0008, 0x8110},	/* Enable charge pump output */
+	{0x0002, 0x8116},	/* 200 kHz pump clock */
+	/* UNKNOWN DIRECTION (URB_FUNCTION_SELECT_INTERFACE:) */
+	{0x0003, 0x8111},	/* Reset compression & memory */
+	{0x0000, 0x8111},	/* Normal mode (not reset) */
+	{0x0098, 0x8110},
+		/* Enable charge pump output, sync.serial,external 2x clock */
+	{0x000d, 0x8114},	/* SW GPIO data */
+	{0x0002, 0x8116},	/* 200 kHz pump clock */
+	{0x0020, 0x8112},	/* Video drop enable, ISO streaming disable */
 /* --------------------------------------- */
-	/* 44740  1819 */ {0x000f, 0x8402},
-	/* memory bank */
-	/* 44765  1820 */ {0x0000, 0x8403},
-	/* ... address */
+	{0x000f, 0x8402},	/* memory bank */
+	{0x0000, 0x8403},	/* ... address */
 /* --------------------------------------- */
 /* 0x88__ is Synchronous Serial Interface. */
 /* TBD: This table could be expressed more compactly */
@@ -145,446 +121,384 @@ static const u16 spca508_init_data[][2] =
 /* TBD: Should see if the values in spca50x_i2c_data */
 /* would work with the VQ110 instead of the values */
 /* below. */
-	/* 44790  1821 */ {0x00c0, 0x8804},
-	/* SSI slave addr */
-	/* 44815  1822 */ {0x0008, 0x8802},
-	/* 375 Khz SSI clock */
-	/* 44838  1823 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 44862  1824 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 44888  1825 */ {0x0008, 0x8802},
-	/* 375 Khz SSI clock */
-	/* 44913  1826 */ {0x0012, 0x8801},
-	/* SSI reg addr */
-	/* 44938  1827 */ {0x0080, 0x8800},
-	/* SSI data to write */
-	/* 44961  1828 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 44985  1829 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45009  1830 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 45035  1831 */ {0x0008, 0x8802},
-	/* 375 Khz SSI clock */
-	/* 45060  1832 */ {0x0012, 0x8801},
-	/* SSI reg addr */
-	/* 45085  1833 */ {0x0000, 0x8800},
-	/* SSI data to write */
-	/* 45108  1834 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45132  1835 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45156  1836 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 45182  1837 */ {0x0008, 0x8802},
-	/* 375 Khz SSI clock */
-	/* 45207  1838 */ {0x0011, 0x8801},
-	/* SSI reg addr */
-	/* 45232  1839 */ {0x0040, 0x8800},
-	/* SSI data to write */
-	/* 45255  1840 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45279  1841 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45303  1842 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 45329  1843 */ {0x0008, 0x8802},
-	/* 45354  1844 */ {0x0013, 0x8801},
-	/* 45379  1845 */ {0x0000, 0x8800},
-	/* 45402  1846 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45426  1847 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45450  1848 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 45476  1849 */ {0x0008, 0x8802},
-	/* 45501  1850 */ {0x0014, 0x8801},
-	/* 45526  1851 */ {0x0000, 0x8800},
-	/* 45549  1852 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45573  1853 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45597  1854 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 45623  1855 */ {0x0008, 0x8802},
-	/* 45648  1856 */ {0x0015, 0x8801},
-	/* 45673  1857 */ {0x0001, 0x8800},
-	/* 45696  1858 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45720  1859 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45744  1860 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 45770  1861 */ {0x0008, 0x8802},
-	/* 45795  1862 */ {0x0016, 0x8801},
-	/* 45820  1863 */ {0x0003, 0x8800},
-	/* 45843  1864 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45867  1865 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 45891  1866 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 45917  1867 */ {0x0008, 0x8802},
-	/* 45942  1868 */ {0x0017, 0x8801},
-	/* 45967  1869 */ {0x0036, 0x8800},
-	/* 45990  1870 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46014  1871 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46038  1872 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 46064  1873 */ {0x0008, 0x8802},
-	/* 46089  1874 */ {0x0018, 0x8801},
-	/* 46114  1875 */ {0x00ec, 0x8800},
-	/* 46137  1876 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46161  1877 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46185  1878 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 46211  1879 */ {0x0008, 0x8802},
-	/* 46236  1880 */ {0x001a, 0x8801},
-	/* 46261  1881 */ {0x0094, 0x8800},
-	/* 46284  1882 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46308  1883 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46332  1884 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 46358  1885 */ {0x0008, 0x8802},
-	/* 46383  1886 */ {0x001b, 0x8801},
-	/* 46408  1887 */ {0x0000, 0x8800},
-	/* 46431  1888 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46455  1889 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46479  1890 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 46505  1891 */ {0x0008, 0x8802},
-	/* 46530  1892 */ {0x0027, 0x8801},
-	/* 46555  1893 */ {0x00a2, 0x8800},
-	/* 46578  1894 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46602  1895 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46626  1896 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 46652  1897 */ {0x0008, 0x8802},
-	/* 46677  1898 */ {0x0028, 0x8801},
-	/* 46702  1899 */ {0x0040, 0x8800},
-	/* 46725  1900 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46749  1901 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46773  1902 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 46799  1903 */ {0x0008, 0x8802},
-	/* 46824  1904 */ {0x002a, 0x8801},
-	/* 46849  1905 */ {0x0084, 0x8800},
-	/* 46872  1906 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 46896  1907 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */
-	/* 46920  1908 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 46946  1909 */ {0x0008, 0x8802},
-	/* 46971  1910 */ {0x002b, 0x8801},
-	/* 46996  1911 */ {0x00a8, 0x8800},
-	/* 47019  1912 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47043  1913 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47067  1914 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 47093  1915 */ {0x0008, 0x8802},
-	/* 47118  1916 */ {0x002c, 0x8801},
-	/* 47143  1917 */ {0x00fe, 0x8800},
-	/* 47166  1918 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47190  1919 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47214  1920 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 47240  1921 */ {0x0008, 0x8802},
-	/* 47265  1922 */ {0x002d, 0x8801},
-	/* 47290  1923 */ {0x0003, 0x8800},
-	/* 47313  1924 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47337  1925 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47361  1926 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 47387  1927 */ {0x0008, 0x8802},
-	/* 47412  1928 */ {0x0038, 0x8801},
-	/* 47437  1929 */ {0x0083, 0x8800},
-	/* 47460  1930 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47484  1931 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47508  1932 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 47534  1933 */ {0x0008, 0x8802},
-	/* 47559  1934 */ {0x0033, 0x8801},
-	/* 47584  1935 */ {0x0081, 0x8800},
-	/* 47607  1936 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47631  1937 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47655  1938 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 47681  1939 */ {0x0008, 0x8802},
-	/* 47706  1940 */ {0x0034, 0x8801},
-	/* 47731  1941 */ {0x004a, 0x8800},
-	/* 47754  1942 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47778  1943 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47802  1944 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 47828  1945 */ {0x0008, 0x8802},
-	/* 47853  1946 */ {0x0039, 0x8801},
-	/* 47878  1947 */ {0x0000, 0x8800},
-	/* 47901  1948 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47925  1949 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 47949  1950 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 47975  1951 */ {0x0008, 0x8802},
-	/* 48000  1952 */ {0x0010, 0x8801},
-	/* 48025  1953 */ {0x00a8, 0x8800},
-	/* 48048  1954 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48072  1955 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48096  1956 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 48122  1957 */ {0x0008, 0x8802},
-	/* 48147  1958 */ {0x0006, 0x8801},
-	/* 48172  1959 */ {0x0058, 0x8800},
-	/* 48195  1960 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48219  1961 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */
-	/* 48243  1962 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 48269  1963 */ {0x0008, 0x8802},
-	/* 48294  1964 */ {0x0000, 0x8801},
-	/* 48319  1965 */ {0x0004, 0x8800},
-	/* 48342  1966 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48366  1967 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48390  1968 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 48416  1969 */ {0x0008, 0x8802},
-	/* 48441  1970 */ {0x0040, 0x8801},
-	/* 48466  1971 */ {0x0080, 0x8800},
-	/* 48489  1972 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48513  1973 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48537  1974 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 48563  1975 */ {0x0008, 0x8802},
-	/* 48588  1976 */ {0x0041, 0x8801},
-	/* 48613  1977 */ {0x000c, 0x8800},
-	/* 48636  1978 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48660  1979 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48684  1980 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 48710  1981 */ {0x0008, 0x8802},
-	/* 48735  1982 */ {0x0042, 0x8801},
-	/* 48760  1983 */ {0x000c, 0x8800},
-	/* 48783  1984 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48807  1985 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48831  1986 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 48857  1987 */ {0x0008, 0x8802},
-	/* 48882  1988 */ {0x0043, 0x8801},
-	/* 48907  1989 */ {0x0028, 0x8800},
-	/* 48930  1990 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48954  1991 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 48978  1992 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 49004  1993 */ {0x0008, 0x8802},
-	/* 49029  1994 */ {0x0044, 0x8801},
-	/* 49054  1995 */ {0x0080, 0x8800},
-	/* 49077  1996 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49101  1997 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49125  1998 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 49151  1999 */ {0x0008, 0x8802},
-	/* 49176  2000 */ {0x0045, 0x8801},
-	/* 49201  2001 */ {0x0020, 0x8800},
-	/* 49224  2002 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49248  2003 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49272  2004 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 49298  2005 */ {0x0008, 0x8802},
-	/* 49323  2006 */ {0x0046, 0x8801},
-	/* 49348  2007 */ {0x0020, 0x8800},
-	/* 49371  2008 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49395  2009 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49419  2010 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 49445  2011 */ {0x0008, 0x8802},
-	/* 49470  2012 */ {0x0047, 0x8801},
-	/* 49495  2013 */ {0x0080, 0x8800},
-	/* 49518  2014 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49542  2015 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49566  2016 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 49592  2017 */ {0x0008, 0x8802},
-	/* 49617  2018 */ {0x0048, 0x8801},
-	/* 49642  2019 */ {0x004c, 0x8800},
-	/* 49665  2020 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49689  2021 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49713  2022 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 49739  2023 */ {0x0008, 0x8802},
-	/* 49764  2024 */ {0x0049, 0x8801},
-	/* 49789  2025 */ {0x0084, 0x8800},
-	/* 49812  2026 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49836  2027 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49860  2028 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 49886  2029 */ {0x0008, 0x8802},
-	/* 49911  2030 */ {0x004a, 0x8801},
-	/* 49936  2031 */ {0x0084, 0x8800},
-	/* 49959  2032 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 49983  2033 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 50007  2034 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 50033  2035 */ {0x0008, 0x8802},
-	/* 50058  2036 */ {0x004b, 0x8801},
-	/* 50083  2037 */ {0x0084, 0x8800},
-	/* 50106  2038 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
+	{0x00c0, 0x8804},	/* SSI slave addr */
+	{0x0008, 0x8802},	/* 375 Khz SSI clock */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},	/* 375 Khz SSI clock */
+	{0x0012, 0x8801},	/* SSI reg addr */
+	{0x0080, 0x8800},	/* SSI data to write */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},	/* 375 Khz SSI clock */
+	{0x0012, 0x8801},	/* SSI reg addr */
+	{0x0000, 0x8800},	/* SSI data to write */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},	/* 375 Khz SSI clock */
+	{0x0011, 0x8801},	/* SSI reg addr */
+	{0x0040, 0x8800},	/* SSI data to write */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0013, 0x8801},
+	{0x0000, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0014, 0x8801},
+	{0x0000, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0015, 0x8801},
+	{0x0001, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0016, 0x8801},
+	{0x0003, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0017, 0x8801},
+	{0x0036, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0018, 0x8801},
+	{0x00ec, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x001a, 0x8801},
+	{0x0094, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x001b, 0x8801},
+	{0x0000, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0027, 0x8801},
+	{0x00a2, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0028, 0x8801},
+	{0x0040, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x002a, 0x8801},
+	{0x0084, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00 */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x002b, 0x8801},
+	{0x00a8, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x002c, 0x8801},
+	{0x00fe, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x002d, 0x8801},
+	{0x0003, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0038, 0x8801},
+	{0x0083, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0033, 0x8801},
+	{0x0081, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0034, 0x8801},
+	{0x004a, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0039, 0x8801},
+	{0x0000, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0010, 0x8801},
+	{0x00a8, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0006, 0x8801},
+	{0x0058, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00 */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0000, 0x8801},
+	{0x0004, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0040, 0x8801},
+	{0x0080, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0041, 0x8801},
+	{0x000c, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0042, 0x8801},
+	{0x000c, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0043, 0x8801},
+	{0x0028, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0044, 0x8801},
+	{0x0080, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0045, 0x8801},
+	{0x0020, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0046, 0x8801},
+	{0x0020, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0047, 0x8801},
+	{0x0080, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0048, 0x8801},
+	{0x004c, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x0049, 0x8801},
+	{0x0084, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x004a, 0x8801},
+	{0x0084, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x0008, 0x8802},
+	{0x004b, 0x8801},
+	{0x0084, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 	/* --------------------------------------- */
-	/* 50132  2039 */ {0x0012, 0x8700},
-	/* Clock speed 48Mhz/(2+2)/2= 6 Mhz */
-	/* 50157  2040 */ {0x0000, 0x8701},
-	/* CKx1 clock delay adj */
-	/* 50182  2041 */ {0x0000, 0x8701},
-	/* CKx1 clock delay adj */
-	/* 50207  2042 */ {0x0001, 0x870c},
-	/* CKOx2 output */
+	{0x0012, 0x8700},	/* Clock speed 48Mhz/(2+2)/2= 6 Mhz */
+	{0x0000, 0x8701},	/* CKx1 clock delay adj */
+	{0x0000, 0x8701},	/* CKx1 clock delay adj */
+	{0x0001, 0x870c},	/* CKOx2 output */
 	/* --------------------------------------- */
-	/* 50232  2043 */ {0x0080, 0x8600},
-	/* Line memory read counter (L) */
-	/* 50257  2044 */ {0x0001, 0x8606},
-	/* reserved */
-	/* 50282  2045 */ {0x0064, 0x8607},
-	/* Line memory read counter (H) 0x6480=25,728 */
-	/* 50307  2046 */ {0x002a, 0x8601},
-	/* CDSP sharp interpolation mode,
+	{0x0080, 0x8600},	/* Line memory read counter (L) */
+	{0x0001, 0x8606},	/* reserved */
+	{0x0064, 0x8607},	/* Line memory read counter (H) 0x6480=25,728 */
+	{0x002a, 0x8601},	/* CDSP sharp interpolation mode,
 	 *			line sel for color sep, edge enhance enab */
-	/* 50332  2047 */ {0x0000, 0x8602},
-	/* optical black level for user settng = 0 */
-	/* 50357  2048 */ {0x0080, 0x8600},
-	/* Line memory read counter (L) */
-	/* 50382  2049 */ {0x000a, 0x8603},
-	/* optical black level calc mode: auto; optical black offset = 10 */
-	/* 50407  2050 */ {0x00df, 0x865b},
-	/* Horiz offset for valid pixels (L)=0xdf */
-	/* 50432  2051 */ {0x0012, 0x865c},
-	/* Vert offset for valid lines (L)=0x12 */
+	{0x0000, 0x8602},	/* optical black level for user settng = 0 */
+	{0x0080, 0x8600},	/* Line memory read counter (L) */
+	{0x000a, 0x8603},	/* optical black level calc mode:
+				 * auto; optical black offset = 10 */
+	{0x00df, 0x865b},	/* Horiz offset for valid pixels (L)=0xdf */
+	{0x0012, 0x865c},	/* Vert offset for valid lines (L)=0x12 */
 
 /* The following two lines seem to be the "wrong" resolution. */
 /* But perhaps these indicate the actual size of the sensor */
 /* rather than the size of the current video mode. */
-	/* 50457  2052 */ {0x0058, 0x865d},
-	/* Horiz valid pixels (*4) (L) = 352 */
-	/* 50482  2053 */ {0x0048, 0x865e},
-	/* Vert valid lines (*4) (L) = 288 */
-
-	/* 50507  2054 */ {0x0015, 0x8608},
-	/* A11 Coef ... */
-	/* 50532  2055 */ {0x0030, 0x8609},
-	/* 50557  2056 */ {0x00fb, 0x860a},
-	/* 50582  2057 */ {0x003e, 0x860b},
-	/* 50607  2058 */ {0x00ce, 0x860c},
-	/* 50632  2059 */ {0x00f4, 0x860d},
-	/* 50657  2060 */ {0x00eb, 0x860e},
-	/* 50682  2061 */ {0x00dc, 0x860f},
-	/* 50707  2062 */ {0x0039, 0x8610},
-	/* 50732  2063 */ {0x0001, 0x8611},
-	/* R offset for white balance ... */
-	/* 50757  2064 */ {0x0000, 0x8612},
-	/* 50782  2065 */ {0x0001, 0x8613},
-	/* 50807  2066 */ {0x0000, 0x8614},
-	/* 50832  2067 */ {0x005b, 0x8651},
-	/* R gain for white balance ... */
-	/* 50857  2068 */ {0x0040, 0x8652},
-	/* 50882  2069 */ {0x0060, 0x8653},
-	/* 50907  2070 */ {0x0040, 0x8654},
-	/* 50932  2071 */ {0x0000, 0x8655},
-	/* 50957  2072 */ {0x0001, 0x863f},
-	/* Fixed gamma correction enable, USB control,
-	 *			 lum filter disable, lum noise clip disable */
-	/* 50982  2073 */ {0x00a1, 0x8656},
-	/* Window1 size 256x256, Windows2 size 64x64,
-	 *		 gamma look-up disable, new edge enhancement enable */
-	/* 51007  2074 */ {0x0018, 0x8657},
-	/* Edge gain high thresh */
-	/* 51032  2075 */ {0x0020, 0x8658},
-	/* Edge gain low thresh */
-	/* 51057  2076 */ {0x000a, 0x8659},
-	/* Edge bandwidth high threshold */
-	/* 51082  2077 */ {0x0005, 0x865a},
-	/* Edge bandwidth low threshold */
+	{0x0058, 0x865d},	/* Horiz valid pixels (*4) (L) = 352 */
+	{0x0048, 0x865e},	/* Vert valid lines (*4) (L) = 288 */
+
+	{0x0015, 0x8608},	/* A11 Coef ... */
+	{0x0030, 0x8609},
+	{0x00fb, 0x860a},
+	{0x003e, 0x860b},
+	{0x00ce, 0x860c},
+	{0x00f4, 0x860d},
+	{0x00eb, 0x860e},
+	{0x00dc, 0x860f},
+	{0x0039, 0x8610},
+	{0x0001, 0x8611},	/* R offset for white balance ... */
+	{0x0000, 0x8612},
+	{0x0001, 0x8613},
+	{0x0000, 0x8614},
+	{0x005b, 0x8651},	/* R gain for white balance ... */
+	{0x0040, 0x8652},
+	{0x0060, 0x8653},
+	{0x0040, 0x8654},
+	{0x0000, 0x8655},
+	{0x0001, 0x863f},	/* Fixed gamma correction enable, USB control,
+				 * lum filter disable, lum noise clip disable */
+	{0x00a1, 0x8656},	/* Window1 size 256x256, Windows2 size 64x64,
+				 * gamma look-up disable,
+				 * new edge enhancement enable */
+	{0x0018, 0x8657},	/* Edge gain high thresh */
+	{0x0020, 0x8658},	/* Edge gain low thresh */
+	{0x000a, 0x8659},	/* Edge bandwidth high threshold */
+	{0x0005, 0x865a},	/* Edge bandwidth low threshold */
 	/* -------------------------------- */
-	/* 51107  2078 */ {0x0030, 0x8112},
-	/* Video drop enable, ISO streaming enable */
-	/* 51130  2079 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 51154  2080 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 51180  2081 */ {0xa908, 0x8802},
-	/* 51205  2082 */ {0x0034, 0x8801},
-	/* SSI reg addr */
-	/* 51230  2083 */ {0x00ca, 0x8800},
+	{0x0030, 0x8112},	/* Video drop enable, ISO streaming enable */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0xa908, 0x8802},
+	{0x0034, 0x8801},	/* SSI reg addr */
+	{0x00ca, 0x8800},
 	/* SSI data to write */
-	/* 51253  2084 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 51277  2085 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 51301  2086 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 51327  2087 */ {0x1f08, 0x8802},
-	/* 51352  2088 */ {0x0006, 0x8801},
-	/* 51377  2089 */ {0x0080, 0x8800},
-	/* 51400  2090 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0x1f08, 0x8802},
+	{0x0006, 0x8801},
+	{0x0080, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
 /* ----- Read back coefs we wrote earlier. */
-	/* 51424  2091 */ /* READ { 0, 0x0000, 0x8608 } -> 0000: 15  */
-	/* 51448  2092 */ /* READ { 0, 0x0000, 0x8609 } -> 0000: 30  */
-	/* 51472  2093 */ /* READ { 0, 0x0000, 0x860a } -> 0000: fb  */
-	/* 51496  2094 */ /* READ { 0, 0x0000, 0x860b } -> 0000: 3e  */
-	/* 51520  2095 */ /* READ { 0, 0x0000, 0x860c } -> 0000: ce  */
-	/* 51544  2096 */ /* READ { 0, 0x0000, 0x860d } -> 0000: f4  */
-	/* 51568  2097 */ /* READ { 0, 0x0000, 0x860e } -> 0000: eb  */
-	/* 51592  2098 */ /* READ { 0, 0x0000, 0x860f } -> 0000: dc  */
-	/* 51616  2099 */ /* READ { 0, 0x0000, 0x8610 } -> 0000: 39  */
-	/* 51640  2100 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 51664  2101 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08  */
-	/* 51690  2102 */ {0xb008, 0x8802},
-	/* 51715  2103 */ {0x0006, 0x8801},
-	/* 51740  2104 */ {0x007d, 0x8800},
-	/* 51763  2105 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0000, 0x8608 } -> 0000: 15  */
+	/* READ { 0x0000, 0x8609 } -> 0000: 30  */
+	/* READ { 0x0000, 0x860a } -> 0000: fb  */
+	/* READ { 0x0000, 0x860b } -> 0000: 3e  */
+	/* READ { 0x0000, 0x860c } -> 0000: ce  */
+	/* READ { 0x0000, 0x860d } -> 0000: f4  */
+	/* READ { 0x0000, 0x860e } -> 0000: eb  */
+	/* READ { 0x0000, 0x860f } -> 0000: dc  */
+	/* READ { 0x0000, 0x8610 } -> 0000: 39  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 08  */
+	{0xb008, 0x8802},
+	{0x0006, 0x8801},
+	{0x007d, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
 
 	/* This chunk is seemingly redundant with */
 	/* earlier commands (A11 Coef...), but if I disable it, */
 	/* the image appears too dark.  Maybe there was some kind of */
 	/* reset since the earlier commands, so this is necessary again. */
-	/* 51789  2106 */ {0x0015, 0x8608},
-	/* 51814  2107 */ {0x0030, 0x8609},
-	/* 51839  2108 */ {0xfffb, 0x860a},
-	/* 51864  2109 */ {0x003e, 0x860b},
-	/* 51889  2110 */ {0xffce, 0x860c},
-	/* 51914  2111 */ {0xfff4, 0x860d},
-	/* 51939  2112 */ {0xffeb, 0x860e},
-	/* 51964  2113 */ {0xffdc, 0x860f},
-	/* 51989  2114 */ {0x0039, 0x8610},
-	/* 52014  2115 */ {0x0018, 0x8657},
-
-	/* 52039  2116 */ {0x0000, 0x8508},
-	/* Disable compression. */
+	{0x0015, 0x8608},
+	{0x0030, 0x8609},
+	{0xfffb, 0x860a},
+	{0x003e, 0x860b},
+	{0xffce, 0x860c},
+	{0xfff4, 0x860d},
+	{0xffeb, 0x860e},
+	{0xffdc, 0x860f},
+	{0x0039, 0x8610},
+	{0x0018, 0x8657},
+
+	{0x0000, 0x8508},	/* Disable compression. */
 	/* Previous line was:
-	 * 52039  2116 *  { 0, 0x0021, 0x8508 },  * Enable compression. */
-	/* 52064  2117 */ {0x0032, 0x850b},
-	/* compression stuff */
-	/* 52089  2118 */ {0x0003, 0x8509},
-	/* compression stuff */
-	/* 52114  2119 */ {0x0011, 0x850a},
-	/* compression stuff */
-	/* 52139  2120 */ {0x0021, 0x850d},
-	/* compression stuff */
-	/* 52164  2121 */ {0x0010, 0x850c},
-	/* compression stuff */
-	/* 52189  2122 */ {0x0003, 0x8500},
-	/* *** Video mode: 160x120 */
-	/* 52214  2123 */ {0x0001, 0x8501},
-	/* Hardware-dominated snap control */
-	/* 52239  2124 */ {0x0061, 0x8656},
-	/* Window1 size 128x128, Windows2 size 128x128,
-	 *		gamma look-up disable, new edge enhancement enable */
-	/* 52264  2125 */ {0x0018, 0x8617},
-	/* Window1 start X (*2) */
-	/* 52289  2126 */ {0x0008, 0x8618},
-	/* Window1 start Y (*2) */
-	/* 52314  2127 */ {0x0061, 0x8656},
-	/* Window1 size 128x128, Windows2 size 128x128,
-	 *		gamma look-up disable, new edge enhancement enable */
-	/* 52339  2128 */ {0x0058, 0x8619},
-	/* Window2 start X (*2) */
-	/* 52364  2129 */ {0x0008, 0x861a},
-	/* Window2 start Y (*2) */
-	/* 52389  2130 */ {0x00ff, 0x8615},
-	/* High lum thresh for white balance */
-	/* 52414  2131 */ {0x0000, 0x8616},
-	/* Low lum thresh for white balance */
-	/* 52439  2132 */ {0x0012, 0x8700},
-	/* Clock speed 48Mhz/(2+2)/2= 6 Mhz */
-	/* 52464  2133 */ {0x0012, 0x8700},
-	/* Clock speed 48Mhz/(2+2)/2= 6 Mhz */
-	/* 52487  2134 */ /* READ { 0, 0x0000, 0x8656 } -> 0000: 61  */
-	/* 52513  2135 */ {0x0028, 0x8802},
-	/* 375 Khz SSI clock, SSI r/w sync with VSYNC */
-	/* 52536  2136 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 52560  2137 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 28  */
-	/* 52586  2138 */ {0x1f28, 0x8802},
-	/* 375 Khz SSI clock, SSI r/w sync with VSYNC */
-	/* 52611  2139 */ {0x0010, 0x8801},
-	/* SSI reg addr */
-	/* 52636  2140 */ {0x003e, 0x8800},
-	/* SSI data to write */
-	/* 52659  2141 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 52685  2142 */ {0x0028, 0x8802},
-	/* 52708  2143 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 52732  2144 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 28  */
-	/* 52758  2145 */ {0x1f28, 0x8802},
-	/* 52783  2146 */ {0x0000, 0x8801},
-	/* 52808  2147 */ {0x001f, 0x8800},
-	/* 52831  2148 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 52857  2149 */ {0x0001, 0x8602},
-	/* optical black level for user settning = 1 */
+	{0x0021, 0x8508},	 * Enable compression. */
+	{0x0032, 0x850b},	/* compression stuff */
+	{0x0003, 0x8509},	/* compression stuff */
+	{0x0011, 0x850a},	/* compression stuff */
+	{0x0021, 0x850d},	/* compression stuff */
+	{0x0010, 0x850c},	/* compression stuff */
+	{0x0003, 0x8500},	/* *** Video mode: 160x120 */
+	{0x0001, 0x8501},	/* Hardware-dominated snap control */
+	{0x0061, 0x8656},	/* Window1 size 128x128, Windows2 size 128x128,
+				 * gamma look-up disable,
+				 * new edge enhancement enable */
+	{0x0018, 0x8617},	/* Window1 start X (*2) */
+	{0x0008, 0x8618},	/* Window1 start Y (*2) */
+	{0x0061, 0x8656},	/* Window1 size 128x128, Windows2 size 128x128,
+				 * gamma look-up disable,
+				 * new edge enhancement enable */
+	{0x0058, 0x8619},	/* Window2 start X (*2) */
+	{0x0008, 0x861a},	/* Window2 start Y (*2) */
+	{0x00ff, 0x8615},	/* High lum thresh for white balance */
+	{0x0000, 0x8616},	/* Low lum thresh for white balance */
+	{0x0012, 0x8700},	/* Clock speed 48Mhz/(2+2)/2= 6 Mhz */
+	{0x0012, 0x8700},	/* Clock speed 48Mhz/(2+2)/2= 6 Mhz */
+	/* READ { 0x0000, 0x8656 } -> 0000: 61  */
+	{0x0028, 0x8802},    /* 375 Khz SSI clock, SSI r/w sync with VSYNC */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 28  */
+	{0x1f28, 0x8802},    /* 375 Khz SSI clock, SSI r/w sync with VSYNC */
+	{0x0010, 0x8801},	/* SSI reg addr */
+	{0x003e, 0x8800},	/* SSI data to write */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	{0x0028, 0x8802},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 28  */
+	{0x1f28, 0x8802},
+	{0x0000, 0x8801},
+	{0x001f, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	{0x0001, 0x8602},    /* optical black level for user settning = 1 */
 
 	/* Original: */
-	/* 52882  2150 */ {0x0023, 0x8700},
-	/* Clock speed 48Mhz/(3+2)/4= 2.4 Mhz */
-	/* 52907  2151 */ {0x000f, 0x8602},
-	/* optical black level for user settning = 15 */
-
-	/* 52932  2152 */ {0x0028, 0x8802},
-	/* 52955  2153 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 52979  2154 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 28  */
-	/* 53005  2155 */ {0x1f28, 0x8802},
-	/* 53030  2156 */ {0x0010, 0x8801},
-	/* 53055  2157 */ {0x007b, 0x8800},
-	/* 53078  2158 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00  */
-	/* 53104  2159 */ {0x002f, 0x8651},
-	/* R gain for white balance ... */
-	/* 53129  2160 */ {0x0080, 0x8653},
-	/* 53152  2161 */ /* READ { 0, 0x0000, 0x8655 } -> 0000: 00  */
-	/* 53178  2162 */ {0x0000, 0x8655},
-
-	/* 53203  2163 */ {0x0030, 0x8112},
-	/* Video drop enable, ISO streaming enable */
-	/* 53228  2164 */ {0x0020, 0x8112},
-	/* Video drop enable, ISO streaming disable */
-	/* 53252  2165 */
-	     /* UNKNOWN DIRECTION (URB_FUNCTION_SELECT_INTERFACE: (ALT=0) ) */
+	{0x0023, 0x8700},	/* Clock speed 48Mhz/(3+2)/4= 2.4 Mhz */
+	{0x000f, 0x8602},    /* optical black level for user settning = 15 */
+
+	{0x0028, 0x8802},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 28  */
+	{0x1f28, 0x8802},
+	{0x0010, 0x8801},
+	{0x007b, 0x8800},
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	{0x002f, 0x8651},	/* R gain for white balance ... */
+	{0x0080, 0x8653},
+	/* READ { 0x0000, 0x8655 } -> 0000: 00  */
+	{0x0000, 0x8655},
+
+	{0x0030, 0x8112},	/* Video drop enable, ISO streaming enable */
+	{0x0020, 0x8112},	/* Video drop enable, ISO streaming disable */
+	/* UNKNOWN DIRECTION (URB_FUNCTION_SELECT_INTERFACE: (ALT=0) ) */
 	{}
 };
 
@@ -592,27 +506,27 @@ static const u16 spca508_init_data[][2] =
  * Initialization data for Intel EasyPC Camera CS110
  */
 static const u16 spca508cs110_init_data[][2] = {
-	{0x0000, 0x870b}, /* Reset CTL3 */
-	{0x0003, 0x8111}, /* Soft Reset compression, memory, TG & CDSP */
-	{0x0000, 0x8111}, /* Normal operation on reset */
+	{0x0000, 0x870b},	/* Reset CTL3 */
+	{0x0003, 0x8111},	/* Soft Reset compression, memory, TG & CDSP */
+	{0x0000, 0x8111},	/* Normal operation on reset */
 	{0x0090, 0x8110},
 		 /* External Clock 2x & Synchronous Serial Interface Output */
-	{0x0020, 0x8112}, /* Video Drop packet enable */
-	{0x0000, 0x8114}, /* Software GPIO output data */
+	{0x0020, 0x8112},	/* Video Drop packet enable */
+	{0x0000, 0x8114},	/* Software GPIO output data */
 	{0x0001, 0x8114},
 	{0x0001, 0x8114},
 	{0x0001, 0x8114},
 	{0x0003, 0x8114},
 
 	/* Initial sequence Synchronous Serial Interface */
-	{0x000f, 0x8402}, /* Memory bank Address */
-	{0x0000, 0x8403}, /* Memory bank Address */
-	{0x00ba, 0x8804}, /* SSI Slave address */
-	{0x0010, 0x8802}, /* 93.75kHz SSI Clock Two DataByte */
-	{0x0010, 0x8802}, /* 93.75kHz SSI Clock two DataByte */
+	{0x000f, 0x8402},	/* Memory bank Address */
+	{0x0000, 0x8403},	/* Memory bank Address */
+	{0x00ba, 0x8804},	/* SSI Slave address */
+	{0x0010, 0x8802},	/* 93.75kHz SSI Clock Two DataByte */
+	{0x0010, 0x8802},	/* 93.75kHz SSI Clock two DataByte */
 
 	{0x0001, 0x8801},
-	{0x000a, 0x8805},/* a - NWG: Dunno what this is about */
+	{0x000a, 0x8805},	/* a - NWG: Dunno what this is about */
 	{0x0000, 0x8800},
 	{0x0010, 0x8802},
 
@@ -646,459 +560,459 @@ static const u16 spca508cs110_init_data[][2] = {
 	{0x0000, 0x8800},
 	{0x0010, 0x8802},
 
-	{0x0002, 0x8704}, /* External input CKIx1 */
-	{0x0001, 0x8606}, /* 1 Line memory Read Counter (H) Result: (d)410 */
-	{0x009a, 0x8600}, /* Line memory Read Counter (L) */
-	{0x0001, 0x865b}, /* 1 Horizontal Offset for Valid Pixel(L) */
-	{0x0003, 0x865c}, /* 3 Vertical Offset for Valid Lines(L) */
-	{0x0058, 0x865d}, /* 58 Horizontal Valid Pixel Window(L) */
+	{0x0002, 0x8704},	/* External input CKIx1 */
+	{0x0001, 0x8606},    /* 1 Line memory Read Counter (H) Result: (d)410 */
+	{0x009a, 0x8600},	/* Line memory Read Counter (L) */
+	{0x0001, 0x865b},	/* 1 Horizontal Offset for Valid Pixel(L) */
+	{0x0003, 0x865c},	/* 3 Vertical Offset for Valid Lines(L) */
+	{0x0058, 0x865d},	/* 58 Horizontal Valid Pixel Window(L) */
 
-	{0x0006, 0x8660}, /* Nibble data + input order */
+	{0x0006, 0x8660},	/* Nibble data + input order */
 
-	{0x000a, 0x8602}, /* Optical black level set to 0x0a */
-/* 1945 */ {0x0000, 0x8603}, /* Optical black level Offset */
+	{0x000a, 0x8602},	/* Optical black level set to 0x0a */
+	{0x0000, 0x8603},	/* Optical black level Offset */
 
-/* 1962 *  {0, 0x0000, 0x8611},  * 0 R  Offset for white Balance */
-/* 1963 *  {0, 0x0000, 0x8612},  * 1 Gr Offset for white Balance */
-/* 1964 *  {0, 0x0000, 0x8613},  * 1f B  Offset for white Balance */
-/* 1965 *  {0, 0x0000, 0x8614},  * f0 Gb Offset for white Balance */
+/*	{0x0000, 0x8611},	 * 0 R  Offset for white Balance */
+/*	{0x0000, 0x8612},	 * 1 Gr Offset for white Balance */
+/*	{0x0000, 0x8613},	 * 1f B  Offset for white Balance */
+/*	{0x0000, 0x8614},	 * f0 Gb Offset for white Balance */
 
-	{0x0040, 0x8651}, /* 2b BLUE gain for white balance  good at all 60 */
-	{0x0030, 0x8652}, /* 41 Gr Gain for white Balance (L) */
-	{0x0035, 0x8653}, /* 26 RED gain for white balance */
-	{0x0035, 0x8654}, /* 40Gb Gain for white Balance (L) */
+	{0x0040, 0x8651},   /* 2b BLUE gain for white balance  good at all 60 */
+	{0x0030, 0x8652},	/* 41 Gr Gain for white Balance (L) */
+	{0x0035, 0x8653},	/* 26 RED gain for white balance */
+	{0x0035, 0x8654},	/* 40Gb Gain for white Balance (L) */
 	{0x0041, 0x863f},
 	      /* Fixed Gamma correction enabled (makes colours look better) */
 
-/* 2422 */ {0x0000, 0x8655},
-	/* High bits for white balance*****brightness control*** */
+	{0x0000, 0x8655},
+		/* High bits for white balance*****brightness control*** */
 	{}
 };
 
 static const u16 spca508_sightcam_init_data[][2] = {
 /* This line seems to setup the frame/canvas */
-	/*368  */ {0x000f, 0x8402},
+	{0x000f, 0x8402},
 
 /* Theese 6 lines are needed to startup the webcam */
-	/*398  */ {0x0090, 0x8110},
-	/*399  */ {0x0001, 0x8114},
-	/*400  */ {0x0001, 0x8114},
-	/*401  */ {0x0001, 0x8114},
-	/*402  */ {0x0003, 0x8114},
-	/*403  */ {0x0080, 0x8804},
+	{0x0090, 0x8110},
+	{0x0001, 0x8114},
+	{0x0001, 0x8114},
+	{0x0001, 0x8114},
+	{0x0003, 0x8114},
+	{0x0080, 0x8804},
 
 /* This part seems to make the pictures darker? (autobrightness?) */
-	/*436  */ {0x0001, 0x8801},
-	/*437  */ {0x0004, 0x8800},
-	/*439  */ {0x0003, 0x8801},
-	/*440  */ {0x00e0, 0x8800},
-	/*442  */ {0x0004, 0x8801},
-	/*443  */ {0x00b4, 0x8800},
-	/*445  */ {0x0005, 0x8801},
-	/*446  */ {0x0000, 0x8800},
-
-	/*448  */ {0x0006, 0x8801},
-	/*449  */ {0x00e0, 0x8800},
-	/*451  */ {0x0007, 0x8801},
-	/*452  */ {0x000c, 0x8800},
+	{0x0001, 0x8801},
+	{0x0004, 0x8800},
+	{0x0003, 0x8801},
+	{0x00e0, 0x8800},
+	{0x0004, 0x8801},
+	{0x00b4, 0x8800},
+	{0x0005, 0x8801},
+	{0x0000, 0x8800},
+
+	{0x0006, 0x8801},
+	{0x00e0, 0x8800},
+	{0x0007, 0x8801},
+	{0x000c, 0x8800},
 
 /* This section is just needed, it probably
  * does something like the previous section,
  * but the cam won't start if it's not included.
  */
-	/*484  */ {0x0014, 0x8801},
-	/*485  */ {0x0008, 0x8800},
-	/*487  */ {0x0015, 0x8801},
-	/*488  */ {0x0067, 0x8800},
-	/*490  */ {0x0016, 0x8801},
-	/*491  */ {0x0000, 0x8800},
-	/*493  */ {0x0017, 0x8801},
-	/*494  */ {0x0020, 0x8800},
-	/*496  */ {0x0018, 0x8801},
-	/*497  */ {0x0044, 0x8800},
+	{0x0014, 0x8801},
+	{0x0008, 0x8800},
+	{0x0015, 0x8801},
+	{0x0067, 0x8800},
+	{0x0016, 0x8801},
+	{0x0000, 0x8800},
+	{0x0017, 0x8801},
+	{0x0020, 0x8800},
+	{0x0018, 0x8801},
+	{0x0044, 0x8800},
 
 /* Makes the picture darker - and the
  * cam won't start if not included
  */
-	/*505  */ {0x001e, 0x8801},
-	/*506  */ {0x00ea, 0x8800},
-	/*508  */ {0x001f, 0x8801},
-	/*509  */ {0x0001, 0x8800},
-	/*511  */ {0x0003, 0x8801},
-	/*512  */ {0x00e0, 0x8800},
+	{0x001e, 0x8801},
+	{0x00ea, 0x8800},
+	{0x001f, 0x8801},
+	{0x0001, 0x8800},
+	{0x0003, 0x8801},
+	{0x00e0, 0x8800},
 
 /* seems to place the colors ontop of each other #1 */
-	/*517  */ {0x0006, 0x8704},
-	/*518  */ {0x0001, 0x870c},
-	/*519  */ {0x0016, 0x8600},
-	/*520  */ {0x0002, 0x8606},
+	{0x0006, 0x8704},
+	{0x0001, 0x870c},
+	{0x0016, 0x8600},
+	{0x0002, 0x8606},
 
 /* if not included the pictures becomes _very_ dark */
-	/*521  */ {0x0064, 0x8607},
-	/*522  */ {0x003a, 0x8601},
-	/*523  */ {0x0000, 0x8602},
+	{0x0064, 0x8607},
+	{0x003a, 0x8601},
+	{0x0000, 0x8602},
 
 /* seems to place the colors ontop of each other #2 */
-	/*524  */ {0x0016, 0x8600},
-	/*525  */ {0x0018, 0x8617},
-	/*526  */ {0x0008, 0x8618},
-	/*527  */ {0x00a1, 0x8656},
+	{0x0016, 0x8600},
+	{0x0018, 0x8617},
+	{0x0008, 0x8618},
+	{0x00a1, 0x8656},
 
 /* webcam won't start if not included */
-	/*528  */ {0x0007, 0x865b},
-	/*529  */ {0x0001, 0x865c},
-	/*530  */ {0x0058, 0x865d},
-	/*531  */ {0x0048, 0x865e},
+	{0x0007, 0x865b},
+	{0x0001, 0x865c},
+	{0x0058, 0x865d},
+	{0x0048, 0x865e},
 
 /* adjusts the colors */
-	/*541  */ {0x0049, 0x8651},
-	/*542  */ {0x0040, 0x8652},
-	/*543  */ {0x004c, 0x8653},
-	/*544  */ {0x0040, 0x8654},
+	{0x0049, 0x8651},
+	{0x0040, 0x8652},
+	{0x004c, 0x8653},
+	{0x0040, 0x8654},
 	{}
 };
 
 static const u16 spca508_sightcam2_init_data[][2] = {
-/* 35 */ {0x0020, 0x8112},
-
-/* 36 */ {0x000f, 0x8402},
-/* 37 */ {0x0000, 0x8403},
-
-/* 38 */ {0x0008, 0x8201},
-/* 39 */ {0x0008, 0x8200},
-/* 40 */ {0x0001, 0x8200},
-/* 43 */ {0x0009, 0x8201},
-/* 44 */ {0x0008, 0x8200},
-/* 45 */ {0x0001, 0x8200},
-/* 48 */ {0x000a, 0x8201},
-/* 49 */ {0x0008, 0x8200},
-/* 50 */ {0x0001, 0x8200},
-/* 53 */ {0x000b, 0x8201},
-/* 54 */ {0x0008, 0x8200},
-/* 55 */ {0x0001, 0x8200},
-/* 58 */ {0x000c, 0x8201},
-/* 59 */ {0x0008, 0x8200},
-/* 60 */ {0x0001, 0x8200},
-/* 63 */ {0x000d, 0x8201},
-/* 64 */ {0x0008, 0x8200},
-/* 65 */ {0x0001, 0x8200},
-/* 68 */ {0x000e, 0x8201},
-/* 69 */ {0x0008, 0x8200},
-/* 70 */ {0x0001, 0x8200},
-/* 73 */ {0x0007, 0x8201},
-/* 74 */ {0x0008, 0x8200},
-/* 75 */ {0x0001, 0x8200},
-/* 78 */ {0x000f, 0x8201},
-/* 79 */ {0x0008, 0x8200},
-/* 80 */ {0x0001, 0x8200},
-
-/* 84 */ {0x0018, 0x8660},
-/* 85 */ {0x0010, 0x8201},
-
-/* 86 */ {0x0008, 0x8200},
-/* 87 */ {0x0001, 0x8200},
-/* 90 */ {0x0011, 0x8201},
-/* 91 */ {0x0008, 0x8200},
-/* 92 */ {0x0001, 0x8200},
-
-/* 95 */ {0x0000, 0x86b0},
-/* 96 */ {0x0034, 0x86b1},
-/* 97 */ {0x0000, 0x86b2},
-/* 98 */ {0x0049, 0x86b3},
-/* 99 */ {0x0000, 0x86b4},
-/* 100 */ {0x0000, 0x86b4},
-
-/* 101 */ {0x0012, 0x8201},
-/* 102 */ {0x0008, 0x8200},
-/* 103 */ {0x0001, 0x8200},
-/* 106 */ {0x0013, 0x8201},
-/* 107 */ {0x0008, 0x8200},
-/* 108 */ {0x0001, 0x8200},
-
-/* 111 */ {0x0001, 0x86b0},
-/* 112 */ {0x00aa, 0x86b1},
-/* 113 */ {0x0000, 0x86b2},
-/* 114 */ {0x00e4, 0x86b3},
-/* 115 */ {0x0000, 0x86b4},
-/* 116 */ {0x0000, 0x86b4},
-
-/* 118 */ {0x0018, 0x8660},
-
-/* 119 */ {0x0090, 0x8110},
-/* 120 */ {0x0001, 0x8114},
-/* 121 */ {0x0001, 0x8114},
-/* 122 */ {0x0001, 0x8114},
-/* 123 */ {0x0003, 0x8114},
-
-/* 124 */ {0x0080, 0x8804},
-/* 157 */ {0x0003, 0x8801},
-/* 158 */ {0x0012, 0x8800},
-/* 160 */ {0x0004, 0x8801},
-/* 161 */ {0x0005, 0x8800},
-/* 163 */ {0x0005, 0x8801},
-/* 164 */ {0x0000, 0x8800},
-/* 166 */ {0x0006, 0x8801},
-/* 167 */ {0x0000, 0x8800},
-/* 169 */ {0x0007, 0x8801},
-/* 170 */ {0x0000, 0x8800},
-/* 172 */ {0x0008, 0x8801},
-/* 173 */ {0x0005, 0x8800},
-/* 175 */ {0x000a, 0x8700},
-/* 176 */ {0x000e, 0x8801},
-/* 177 */ {0x0004, 0x8800},
-/* 179 */ {0x0005, 0x8801},
-/* 180 */ {0x0047, 0x8800},
-/* 182 */ {0x0006, 0x8801},
-/* 183 */ {0x0000, 0x8800},
-/* 185 */ {0x0007, 0x8801},
-/* 186 */ {0x00c0, 0x8800},
-/* 188 */ {0x0008, 0x8801},
-/* 189 */ {0x0003, 0x8800},
-/* 191 */ {0x0013, 0x8801},
-/* 192 */ {0x0001, 0x8800},
-/* 194 */ {0x0009, 0x8801},
-/* 195 */ {0x0000, 0x8800},
-/* 197 */ {0x000a, 0x8801},
-/* 198 */ {0x0000, 0x8800},
-/* 200 */ {0x000b, 0x8801},
-/* 201 */ {0x0000, 0x8800},
-/* 203 */ {0x000c, 0x8801},
-/* 204 */ {0x0000, 0x8800},
-/* 206 */ {0x000e, 0x8801},
-/* 207 */ {0x0004, 0x8800},
-/* 209 */ {0x000f, 0x8801},
-/* 210 */ {0x0000, 0x8800},
-/* 212 */ {0x0010, 0x8801},
-/* 213 */ {0x0006, 0x8800},
-/* 215 */ {0x0011, 0x8801},
-/* 216 */ {0x0006, 0x8800},
-/* 218 */ {0x0012, 0x8801},
-/* 219 */ {0x0000, 0x8800},
-/* 221 */ {0x0013, 0x8801},
-/* 222 */ {0x0001, 0x8800},
-
-/* 224 */ {0x000a, 0x8700},
-/* 225 */ {0x0000, 0x8702},
-/* 226 */ {0x0000, 0x8703},
-/* 227 */ {0x00c2, 0x8704},
-/* 228 */ {0x0001, 0x870c},
-
-/* 229 */ {0x0044, 0x8600},
-/* 230 */ {0x0002, 0x8606},
-/* 231 */ {0x0064, 0x8607},
-/* 232 */ {0x003a, 0x8601},
-/* 233 */ {0x0008, 0x8602},
-/* 234 */ {0x0044, 0x8600},
-/* 235 */ {0x0018, 0x8617},
-/* 236 */ {0x0008, 0x8618},
-/* 237 */ {0x00a1, 0x8656},
-/* 238 */ {0x0004, 0x865b},
-/* 239 */ {0x0002, 0x865c},
-/* 240 */ {0x0058, 0x865d},
-/* 241 */ {0x0048, 0x865e},
-/* 242 */ {0x0012, 0x8608},
-/* 243 */ {0x002c, 0x8609},
-/* 244 */ {0x0002, 0x860a},
-/* 245 */ {0x002c, 0x860b},
-/* 246 */ {0x00db, 0x860c},
-/* 247 */ {0x00f9, 0x860d},
-/* 248 */ {0x00f1, 0x860e},
-/* 249 */ {0x00e3, 0x860f},
-/* 250 */ {0x002c, 0x8610},
-/* 251 */ {0x006c, 0x8651},
-/* 252 */ {0x0041, 0x8652},
-/* 253 */ {0x0059, 0x8653},
-/* 254 */ {0x0040, 0x8654},
-/* 255 */ {0x00fa, 0x8611},
-/* 256 */ {0x00ff, 0x8612},
-/* 257 */ {0x00f8, 0x8613},
-/* 258 */ {0x0000, 0x8614},
-/* 259 */ {0x0001, 0x863f},
-/* 260 */ {0x0000, 0x8640},
-/* 261 */ {0x0026, 0x8641},
-/* 262 */ {0x0045, 0x8642},
-/* 263 */ {0x0060, 0x8643},
-/* 264 */ {0x0075, 0x8644},
-/* 265 */ {0x0088, 0x8645},
-/* 266 */ {0x009b, 0x8646},
-/* 267 */ {0x00b0, 0x8647},
-/* 268 */ {0x00c5, 0x8648},
-/* 269 */ {0x00d2, 0x8649},
-/* 270 */ {0x00dc, 0x864a},
-/* 271 */ {0x00e5, 0x864b},
-/* 272 */ {0x00eb, 0x864c},
-/* 273 */ {0x00f0, 0x864d},
-/* 274 */ {0x00f6, 0x864e},
-/* 275 */ {0x00fa, 0x864f},
-/* 276 */ {0x00ff, 0x8650},
-/* 277 */ {0x0060, 0x8657},
-/* 278 */ {0x0010, 0x8658},
-/* 279 */ {0x0018, 0x8659},
-/* 280 */ {0x0005, 0x865a},
-/* 281 */ {0x0018, 0x8660},
-/* 282 */ {0x0003, 0x8509},
-/* 283 */ {0x0011, 0x850a},
-/* 284 */ {0x0032, 0x850b},
-/* 285 */ {0x0010, 0x850c},
-/* 286 */ {0x0021, 0x850d},
-/* 287 */ {0x0001, 0x8500},
-/* 288 */ {0x0000, 0x8508},
-/* 289 */ {0x0012, 0x8608},
-/* 290 */ {0x002c, 0x8609},
-/* 291 */ {0x0002, 0x860a},
-/* 292 */ {0x0039, 0x860b},
-/* 293 */ {0x00d0, 0x860c},
-/* 294 */ {0x00f7, 0x860d},
-/* 295 */ {0x00ed, 0x860e},
-/* 296 */ {0x00db, 0x860f},
-/* 297 */ {0x0039, 0x8610},
-/* 298 */ {0x0012, 0x8657},
-/* 299 */ {0x000c, 0x8619},
-/* 300 */ {0x0004, 0x861a},
-/* 301 */ {0x00a1, 0x8656},
-/* 302 */ {0x00c8, 0x8615},
-/* 303 */ {0x0032, 0x8616},
-
-/* 306 */ {0x0030, 0x8112},
-/* 313 */ {0x0020, 0x8112},
-/* 314 */ {0x0020, 0x8112},
-/* 315 */ {0x000f, 0x8402},
-/* 316 */ {0x0000, 0x8403},
-
-/* 317 */ {0x0090, 0x8110},
-/* 318 */ {0x0001, 0x8114},
-/* 319 */ {0x0001, 0x8114},
-/* 320 */ {0x0001, 0x8114},
-/* 321 */ {0x0003, 0x8114},
-/* 322 */ {0x0080, 0x8804},
-
-/* 355 */ {0x0003, 0x8801},
-/* 356 */ {0x0012, 0x8800},
-/* 358 */ {0x0004, 0x8801},
-/* 359 */ {0x0005, 0x8800},
-/* 361 */ {0x0005, 0x8801},
-/* 362 */ {0x0047, 0x8800},
-/* 364 */ {0x0006, 0x8801},
-/* 365 */ {0x0000, 0x8800},
-/* 367 */ {0x0007, 0x8801},
-/* 368 */ {0x00c0, 0x8800},
-/* 370 */ {0x0008, 0x8801},
-/* 371 */ {0x0003, 0x8800},
-/* 373 */ {0x000a, 0x8700},
-/* 374 */ {0x000e, 0x8801},
-/* 375 */ {0x0004, 0x8800},
-/* 377 */ {0x0005, 0x8801},
-/* 378 */ {0x0047, 0x8800},
-/* 380 */ {0x0006, 0x8801},
-/* 381 */ {0x0000, 0x8800},
-/* 383 */ {0x0007, 0x8801},
-/* 384 */ {0x00c0, 0x8800},
-/* 386 */ {0x0008, 0x8801},
-/* 387 */ {0x0003, 0x8800},
-/* 389 */ {0x0013, 0x8801},
-/* 390 */ {0x0001, 0x8800},
-/* 392 */ {0x0009, 0x8801},
-/* 393 */ {0x0000, 0x8800},
-/* 395 */ {0x000a, 0x8801},
-/* 396 */ {0x0000, 0x8800},
-/* 398 */ {0x000b, 0x8801},
-/* 399 */ {0x0000, 0x8800},
-/* 401 */ {0x000c, 0x8801},
-/* 402 */ {0x0000, 0x8800},
-/* 404 */ {0x000e, 0x8801},
-/* 405 */ {0x0004, 0x8800},
-/* 407 */ {0x000f, 0x8801},
-/* 408 */ {0x0000, 0x8800},
-/* 410 */ {0x0010, 0x8801},
-/* 411 */ {0x0006, 0x8800},
-/* 413 */ {0x0011, 0x8801},
-/* 414 */ {0x0006, 0x8800},
-/* 416 */ {0x0012, 0x8801},
-/* 417 */ {0x0000, 0x8800},
-/* 419 */ {0x0013, 0x8801},
-/* 420 */ {0x0001, 0x8800},
-/* 422 */ {0x000a, 0x8700},
-/* 423 */ {0x0000, 0x8702},
-/* 424 */ {0x0000, 0x8703},
-/* 425 */ {0x00c2, 0x8704},
-/* 426 */ {0x0001, 0x870c},
-/* 427 */ {0x0044, 0x8600},
-/* 428 */ {0x0002, 0x8606},
-/* 429 */ {0x0064, 0x8607},
-/* 430 */ {0x003a, 0x8601},
-/* 431 */ {0x0008, 0x8602},
-/* 432 */ {0x0044, 0x8600},
-/* 433 */ {0x0018, 0x8617},
-/* 434 */ {0x0008, 0x8618},
-/* 435 */ {0x00a1, 0x8656},
-/* 436 */ {0x0004, 0x865b},
-/* 437 */ {0x0002, 0x865c},
-/* 438 */ {0x0058, 0x865d},
-/* 439 */ {0x0048, 0x865e},
-/* 440 */ {0x0012, 0x8608},
-/* 441 */ {0x002c, 0x8609},
-/* 442 */ {0x0002, 0x860a},
-/* 443 */ {0x002c, 0x860b},
-/* 444 */ {0x00db, 0x860c},
-/* 445 */ {0x00f9, 0x860d},
-/* 446 */ {0x00f1, 0x860e},
-/* 447 */ {0x00e3, 0x860f},
-/* 448 */ {0x002c, 0x8610},
-/* 449 */ {0x006c, 0x8651},
-/* 450 */ {0x0041, 0x8652},
-/* 451 */ {0x0059, 0x8653},
-/* 452 */ {0x0040, 0x8654},
-/* 453 */ {0x00fa, 0x8611},
-/* 454 */ {0x00ff, 0x8612},
-/* 455 */ {0x00f8, 0x8613},
-/* 456 */ {0x0000, 0x8614},
-/* 457 */ {0x0001, 0x863f},
-/* 458 */ {0x0000, 0x8640},
-/* 459 */ {0x0026, 0x8641},
-/* 460 */ {0x0045, 0x8642},
-/* 461 */ {0x0060, 0x8643},
-/* 462 */ {0x0075, 0x8644},
-/* 463 */ {0x0088, 0x8645},
-/* 464 */ {0x009b, 0x8646},
-/* 465 */ {0x00b0, 0x8647},
-/* 466 */ {0x00c5, 0x8648},
-/* 467 */ {0x00d2, 0x8649},
-/* 468 */ {0x00dc, 0x864a},
-/* 469 */ {0x00e5, 0x864b},
-/* 470 */ {0x00eb, 0x864c},
-/* 471 */ {0x00f0, 0x864d},
-/* 472 */ {0x00f6, 0x864e},
-/* 473 */ {0x00fa, 0x864f},
-/* 474 */ {0x00ff, 0x8650},
-/* 475 */ {0x0060, 0x8657},
-/* 476 */ {0x0010, 0x8658},
-/* 477 */ {0x0018, 0x8659},
-/* 478 */ {0x0005, 0x865a},
-/* 479 */ {0x0018, 0x8660},
-/* 480 */ {0x0003, 0x8509},
-/* 481 */ {0x0011, 0x850a},
-/* 482 */ {0x0032, 0x850b},
-/* 483 */ {0x0010, 0x850c},
-/* 484 */ {0x0021, 0x850d},
-/* 485 */ {0x0001, 0x8500},
-/* 486 */ {0x0000, 0x8508},
-
-/* 487 */ {0x0012, 0x8608},
-/* 488 */ {0x002c, 0x8609},
-/* 489 */ {0x0002, 0x860a},
-/* 490 */ {0x0039, 0x860b},
-/* 491 */ {0x00d0, 0x860c},
-/* 492 */ {0x00f7, 0x860d},
-/* 493 */ {0x00ed, 0x860e},
-/* 494 */ {0x00db, 0x860f},
-/* 495 */ {0x0039, 0x8610},
-/* 496 */ {0x0012, 0x8657},
-/* 497 */ {0x0064, 0x8619},
+	{0x0020, 0x8112},
+
+	{0x000f, 0x8402},
+	{0x0000, 0x8403},
+
+	{0x0008, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x0009, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x000a, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x000b, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x000c, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x000d, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x000e, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x0007, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x000f, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+
+	{0x0018, 0x8660},
+	{0x0010, 0x8201},
+
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x0011, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+
+	{0x0000, 0x86b0},
+	{0x0034, 0x86b1},
+	{0x0000, 0x86b2},
+	{0x0049, 0x86b3},
+	{0x0000, 0x86b4},
+	{0x0000, 0x86b4},
+
+	{0x0012, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+	{0x0013, 0x8201},
+	{0x0008, 0x8200},
+	{0x0001, 0x8200},
+
+	{0x0001, 0x86b0},
+	{0x00aa, 0x86b1},
+	{0x0000, 0x86b2},
+	{0x00e4, 0x86b3},
+	{0x0000, 0x86b4},
+	{0x0000, 0x86b4},
+
+	{0x0018, 0x8660},
+
+	{0x0090, 0x8110},
+	{0x0001, 0x8114},
+	{0x0001, 0x8114},
+	{0x0001, 0x8114},
+	{0x0003, 0x8114},
+
+	{0x0080, 0x8804},
+	{0x0003, 0x8801},
+	{0x0012, 0x8800},
+	{0x0004, 0x8801},
+	{0x0005, 0x8800},
+	{0x0005, 0x8801},
+	{0x0000, 0x8800},
+	{0x0006, 0x8801},
+	{0x0000, 0x8800},
+	{0x0007, 0x8801},
+	{0x0000, 0x8800},
+	{0x0008, 0x8801},
+	{0x0005, 0x8800},
+	{0x000a, 0x8700},
+	{0x000e, 0x8801},
+	{0x0004, 0x8800},
+	{0x0005, 0x8801},
+	{0x0047, 0x8800},
+	{0x0006, 0x8801},
+	{0x0000, 0x8800},
+	{0x0007, 0x8801},
+	{0x00c0, 0x8800},
+	{0x0008, 0x8801},
+	{0x0003, 0x8800},
+	{0x0013, 0x8801},
+	{0x0001, 0x8800},
+	{0x0009, 0x8801},
+	{0x0000, 0x8800},
+	{0x000a, 0x8801},
+	{0x0000, 0x8800},
+	{0x000b, 0x8801},
+	{0x0000, 0x8800},
+	{0x000c, 0x8801},
+	{0x0000, 0x8800},
+	{0x000e, 0x8801},
+	{0x0004, 0x8800},
+	{0x000f, 0x8801},
+	{0x0000, 0x8800},
+	{0x0010, 0x8801},
+	{0x0006, 0x8800},
+	{0x0011, 0x8801},
+	{0x0006, 0x8800},
+	{0x0012, 0x8801},
+	{0x0000, 0x8800},
+	{0x0013, 0x8801},
+	{0x0001, 0x8800},
+
+	{0x000a, 0x8700},
+	{0x0000, 0x8702},
+	{0x0000, 0x8703},
+	{0x00c2, 0x8704},
+	{0x0001, 0x870c},
+
+	{0x0044, 0x8600},
+	{0x0002, 0x8606},
+	{0x0064, 0x8607},
+	{0x003a, 0x8601},
+	{0x0008, 0x8602},
+	{0x0044, 0x8600},
+	{0x0018, 0x8617},
+	{0x0008, 0x8618},
+	{0x00a1, 0x8656},
+	{0x0004, 0x865b},
+	{0x0002, 0x865c},
+	{0x0058, 0x865d},
+	{0x0048, 0x865e},
+	{0x0012, 0x8608},
+	{0x002c, 0x8609},
+	{0x0002, 0x860a},
+	{0x002c, 0x860b},
+	{0x00db, 0x860c},
+	{0x00f9, 0x860d},
+	{0x00f1, 0x860e},
+	{0x00e3, 0x860f},
+	{0x002c, 0x8610},
+	{0x006c, 0x8651},
+	{0x0041, 0x8652},
+	{0x0059, 0x8653},
+	{0x0040, 0x8654},
+	{0x00fa, 0x8611},
+	{0x00ff, 0x8612},
+	{0x00f8, 0x8613},
+	{0x0000, 0x8614},
+	{0x0001, 0x863f},
+	{0x0000, 0x8640},
+	{0x0026, 0x8641},
+	{0x0045, 0x8642},
+	{0x0060, 0x8643},
+	{0x0075, 0x8644},
+	{0x0088, 0x8645},
+	{0x009b, 0x8646},
+	{0x00b0, 0x8647},
+	{0x00c5, 0x8648},
+	{0x00d2, 0x8649},
+	{0x00dc, 0x864a},
+	{0x00e5, 0x864b},
+	{0x00eb, 0x864c},
+	{0x00f0, 0x864d},
+	{0x00f6, 0x864e},
+	{0x00fa, 0x864f},
+	{0x00ff, 0x8650},
+	{0x0060, 0x8657},
+	{0x0010, 0x8658},
+	{0x0018, 0x8659},
+	{0x0005, 0x865a},
+	{0x0018, 0x8660},
+	{0x0003, 0x8509},
+	{0x0011, 0x850a},
+	{0x0032, 0x850b},
+	{0x0010, 0x850c},
+	{0x0021, 0x850d},
+	{0x0001, 0x8500},
+	{0x0000, 0x8508},
+	{0x0012, 0x8608},
+	{0x002c, 0x8609},
+	{0x0002, 0x860a},
+	{0x0039, 0x860b},
+	{0x00d0, 0x860c},
+	{0x00f7, 0x860d},
+	{0x00ed, 0x860e},
+	{0x00db, 0x860f},
+	{0x0039, 0x8610},
+	{0x0012, 0x8657},
+	{0x000c, 0x8619},
+	{0x0004, 0x861a},
+	{0x00a1, 0x8656},
+	{0x00c8, 0x8615},
+	{0x0032, 0x8616},
+
+	{0x0030, 0x8112},
+	{0x0020, 0x8112},
+	{0x0020, 0x8112},
+	{0x000f, 0x8402},
+	{0x0000, 0x8403},
+
+	{0x0090, 0x8110},
+	{0x0001, 0x8114},
+	{0x0001, 0x8114},
+	{0x0001, 0x8114},
+	{0x0003, 0x8114},
+	{0x0080, 0x8804},
+
+	{0x0003, 0x8801},
+	{0x0012, 0x8800},
+	{0x0004, 0x8801},
+	{0x0005, 0x8800},
+	{0x0005, 0x8801},
+	{0x0047, 0x8800},
+	{0x0006, 0x8801},
+	{0x0000, 0x8800},
+	{0x0007, 0x8801},
+	{0x00c0, 0x8800},
+	{0x0008, 0x8801},
+	{0x0003, 0x8800},
+	{0x000a, 0x8700},
+	{0x000e, 0x8801},
+	{0x0004, 0x8800},
+	{0x0005, 0x8801},
+	{0x0047, 0x8800},
+	{0x0006, 0x8801},
+	{0x0000, 0x8800},
+	{0x0007, 0x8801},
+	{0x00c0, 0x8800},
+	{0x0008, 0x8801},
+	{0x0003, 0x8800},
+	{0x0013, 0x8801},
+	{0x0001, 0x8800},
+	{0x0009, 0x8801},
+	{0x0000, 0x8800},
+	{0x000a, 0x8801},
+	{0x0000, 0x8800},
+	{0x000b, 0x8801},
+	{0x0000, 0x8800},
+	{0x000c, 0x8801},
+	{0x0000, 0x8800},
+	{0x000e, 0x8801},
+	{0x0004, 0x8800},
+	{0x000f, 0x8801},
+	{0x0000, 0x8800},
+	{0x0010, 0x8801},
+	{0x0006, 0x8800},
+	{0x0011, 0x8801},
+	{0x0006, 0x8800},
+	{0x0012, 0x8801},
+	{0x0000, 0x8800},
+	{0x0013, 0x8801},
+	{0x0001, 0x8800},
+	{0x000a, 0x8700},
+	{0x0000, 0x8702},
+	{0x0000, 0x8703},
+	{0x00c2, 0x8704},
+	{0x0001, 0x870c},
+	{0x0044, 0x8600},
+	{0x0002, 0x8606},
+	{0x0064, 0x8607},
+	{0x003a, 0x8601},
+	{0x0008, 0x8602},
+	{0x0044, 0x8600},
+	{0x0018, 0x8617},
+	{0x0008, 0x8618},
+	{0x00a1, 0x8656},
+	{0x0004, 0x865b},
+	{0x0002, 0x865c},
+	{0x0058, 0x865d},
+	{0x0048, 0x865e},
+	{0x0012, 0x8608},
+	{0x002c, 0x8609},
+	{0x0002, 0x860a},
+	{0x002c, 0x860b},
+	{0x00db, 0x860c},
+	{0x00f9, 0x860d},
+	{0x00f1, 0x860e},
+	{0x00e3, 0x860f},
+	{0x002c, 0x8610},
+	{0x006c, 0x8651},
+	{0x0041, 0x8652},
+	{0x0059, 0x8653},
+	{0x0040, 0x8654},
+	{0x00fa, 0x8611},
+	{0x00ff, 0x8612},
+	{0x00f8, 0x8613},
+	{0x0000, 0x8614},
+	{0x0001, 0x863f},
+	{0x0000, 0x8640},
+	{0x0026, 0x8641},
+	{0x0045, 0x8642},
+	{0x0060, 0x8643},
+	{0x0075, 0x8644},
+	{0x0088, 0x8645},
+	{0x009b, 0x8646},
+	{0x00b0, 0x8647},
+	{0x00c5, 0x8648},
+	{0x00d2, 0x8649},
+	{0x00dc, 0x864a},
+	{0x00e5, 0x864b},
+	{0x00eb, 0x864c},
+	{0x00f0, 0x864d},
+	{0x00f6, 0x864e},
+	{0x00fa, 0x864f},
+	{0x00ff, 0x8650},
+	{0x0060, 0x8657},
+	{0x0010, 0x8658},
+	{0x0018, 0x8659},
+	{0x0005, 0x865a},
+	{0x0018, 0x8660},
+	{0x0003, 0x8509},
+	{0x0011, 0x850a},
+	{0x0032, 0x850b},
+	{0x0010, 0x850c},
+	{0x0021, 0x850d},
+	{0x0001, 0x8500},
+	{0x0000, 0x8508},
+
+	{0x0012, 0x8608},
+	{0x002c, 0x8609},
+	{0x0002, 0x860a},
+	{0x0039, 0x860b},
+	{0x00d0, 0x860c},
+	{0x00f7, 0x860d},
+	{0x00ed, 0x860e},
+	{0x00db, 0x860f},
+	{0x0039, 0x8610},
+	{0x0012, 0x8657},
+	{0x0064, 0x8619},
 
 /* This line starts it all, it is not needed here */
 /* since it has been build into the driver */
 /* jfm: don't start now */
-/* 590  *  {0x0030, 0x8112}, */
+/*	{0x0030, 0x8112}, */
 	{}
 };
 
@@ -1109,14 +1023,14 @@ static const u16 spca508_vista_init_data[][2] = {
 	{0x0008, 0x8200},	/* Clear register */
 	{0x0000, 0x870b},	/* Reset CTL3 */
 	{0x0020, 0x8112},	/* Video Drop packet enable */
-	{0x0003, 0x8111},  /* Soft Reset compression, memory, TG & CDSP */
+	{0x0003, 0x8111},	/* Soft Reset compression, memory, TG & CDSP */
 	{0x0000, 0x8110},	/* Disable everything */
 	{0x0000, 0x8114},	/* Software GPIO output data */
 	{0x0000, 0x8114},
 
 	{0x0003, 0x8111},
 	{0x0000, 0x8111},
-	{0x0090, 0x8110},  /* Enable: SSI output, External 2X clock output */
+	{0x0090, 0x8110},    /* Enable: SSI output, External 2X clock output */
 	{0x0020, 0x8112},
 	{0x0000, 0x8114},
 	{0x0001, 0x8114},
@@ -1129,191 +1043,143 @@ static const u16 spca508_vista_init_data[][2] = {
 	{0x00ba, 0x8804},	/* SSI Slave address */
 	{0x0010, 0x8802},	/* 93.75kHz SSI Clock Two DataByte */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},	/* Will write 2 bytes (DATA1+DATA2) */
 	{0x0020, 0x8801},	/* Register address for SSI read/write */
 	{0x0044, 0x8805},	/* DATA2 */
 	{0x0004, 0x8800},	/* DATA1 -> write triggered */
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0009, 0x8801},
 	{0x0042, 0x8805},
 	{0x0001, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x003c, 0x8801},
 	{0x0001, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0001, 0x8801},
 	{0x000a, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0002, 0x8801},
 	{0x0000, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0003, 0x8801},
 	{0x0027, 0x8805},
 	{0x0001, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0004, 0x8801},
 	{0x0065, 0x8805},
 	{0x0001, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0005, 0x8801},
 	{0x0003, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0006, 0x8801},
 	{0x001c, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0007, 0x8801},
 	{0x002a, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x000e, 0x8801},
 	{0x0000, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0028, 0x8801},
 	{0x002e, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0039, 0x8801},
 	{0x0013, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x003b, 0x8801},
 	{0x000c, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0035, 0x8801},
 	{0x0028, 0x8805},
 	{0x0000, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
-	/* READ { 0, 0x0001, 0x8802 } ->
-		0000: 10  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
+	/* READ { 0x0001, 0x8802 } -> 0000: 10  */
 	{0x0010, 0x8802},
 	{0x0009, 0x8801},
 	{0x0042, 0x8805},
 	{0x0001, 0x8800},
-	/* READ { 0, 0x0001, 0x8803 } ->
-		0000: 00  */
+	/* READ { 0x0001, 0x8803 } -> 0000: 00  */
 
 	{0x0050, 0x8703},
 	{0x0002, 0x8704},	/* External input CKIx1 */
 	{0x0001, 0x870c},	/* Select CKOx2 output */
 	{0x009a, 0x8600},	/* Line memory Read Counter (L) */
-	{0x0001, 0x8606},  /* 1 Line memory Read Counter (H) Result: (d)410 */
+	{0x0001, 0x8606},    /* 1 Line memory Read Counter (H) Result: (d)410 */
 	{0x0023, 0x8601},
 	{0x0010, 0x8602},
 	{0x000a, 0x8603},
-	{0x009A, 0x8600},
+	{0x009a, 0x8600},
 	{0x0001, 0x865b},	/* 1 Horizontal Offset for Valid Pixel(L) */
 	{0x0003, 0x865c},	/* Vertical offset for valid lines (L) */
 	{0x0058, 0x865d},	/* Horizontal valid pixels window (L) */
@@ -1329,7 +1195,7 @@ static const u16 spca508_vista_init_data[][2] = {
 	{0x0005, 0x860a},	/* ... */
 	{0x0025, 0x860b},
 	{0x00e1, 0x860c},
-	{0x00fa, 0x860D},
+	{0x00fa, 0x860d},
 	{0x00f4, 0x860e},
 	{0x00e8, 0x860f},
 	{0x0025, 0x8610},	/* A33 Coef. */
@@ -1344,11 +1210,12 @@ static const u16 spca508_vista_init_data[][2] = {
 	{0x0040, 0x8654},	/* Gb gain for white balance (L) */
 	{0x0001, 0x863f},	/* Enable fixed gamma correction */
 
-	{0x00a1, 0x8656},	/* Size - Window1: 256x256, Window2: 128x128 */
-	/* UV division: UV no change, Enable New edge enhancement */
+	{0x00a1, 0x8656},	/* Size - Window1: 256x256, Window2: 128x128,
+				 * UV division: UV no change,
+				 * Enable New edge enhancement */
 	{0x0018, 0x8657},	/* Edge gain high threshold */
 	{0x0020, 0x8658},	/* Edge gain low threshold */
-	{0x000A, 0x8659},	/* Edge bandwidth high threshold */
+	{0x000a, 0x8659},	/* Edge bandwidth high threshold */
 	{0x0005, 0x865a},	/* Edge bandwidth low threshold */
 	{0x0064, 0x8607},	/* UV filter enable */
 
@@ -1384,29 +1251,20 @@ static const u16 spca508_vista_init_data[][2] = {
 	{0x0000, 0x86b4},
 	{0x001e, 0x8660},
 
-	/* READ { 0, 0x0000, 0x8608 } ->
-		0000: 13  */
-	/* READ { 0, 0x0000, 0x8609 } ->
-		0000: 28  */
-	/* READ { 0, 0x0000, 0x8610 } ->
-		0000: 05  */
-	/* READ { 0, 0x0000, 0x8611 } ->
-		0000: 25  */
-	/* READ { 0, 0x0000, 0x8612 } ->
-		0000: e1  */
-	/* READ { 0, 0x0000, 0x8613 } ->
-		0000: fa  */
-	/* READ { 0, 0x0000, 0x8614 } ->
-		0000: f4  */
-	/* READ { 0, 0x0000, 0x8615 } ->
-		0000: e8  */
-	/* READ { 0, 0x0000, 0x8616 } ->
-		0000: 25  */
+	/* READ { 0x0000, 0x8608 } -> 0000: 13  */
+	/* READ { 0x0000, 0x8609 } -> 0000: 28  */
+	/* READ { 0x0000, 0x8610 } -> 0000: 05  */
+	/* READ { 0x0000, 0x8611 } -> 0000: 25  */
+	/* READ { 0x0000, 0x8612 } -> 0000: e1  */
+	/* READ { 0x0000, 0x8613 } -> 0000: fa  */
+	/* READ { 0x0000, 0x8614 } -> 0000: f4  */
+	/* READ { 0x0000, 0x8615 } -> 0000: e8  */
+	/* READ { 0x0000, 0x8616 } -> 0000: 25  */
 	{}
 };
 
 static int reg_write(struct usb_device *dev,
-			__u16 index, __u16 value)
+			u16 index, u16 value)
 {
 	int ret;
 
@@ -1425,7 +1283,7 @@ static int reg_write(struct usb_device *dev,
 /* read 1 byte */
 /* returns: negative is error, pos or zero is data */
 static int reg_read(struct gspca_dev *gspca_dev,
-			__u16 index)	/* wIndex */
+			u16 index)	/* wIndex */
 {
 	int ret;
 
@@ -1447,16 +1305,16 @@ static int reg_read(struct gspca_dev *gspca_dev,
 }
 
 static int write_vector(struct gspca_dev *gspca_dev,
-			const u16 data[][2])
+			const u16 (*data)[2])
 {
 	struct usb_device *dev = gspca_dev->dev;
-	int ret, i = 0;
+	int ret;
 
-	while (data[i][1] != 0) {
-		ret = reg_write(dev, data[i][1], data[i][0]);
+	while ((*data)[1] != 0) {
+		ret = reg_write(dev, (*data)[1], (*data)[0]);
 		if (ret < 0)
 			return ret;
-		i++;
+		data++;
 	}
 	return 0;
 }
@@ -1468,6 +1326,15 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 	int data1, data2;
+	const u16 (*init_data)[2];
+	static const u16 (*(init_data_tb[]))[2] = {
+		spca508_vista_init_data,	/* CreativeVista 0 */
+		spca508_sightcam_init_data,	/* HamaUSBSightcam 1 */
+		spca508_sightcam2_init_data,	/* HamaUSBSightcam2 2 */
+		spca508cs110_init_data,		/* IntelEasyPCCamera 3 */
+		spca508cs110_init_data,		/* MicroInnovationIC200 4 */
+		spca508_init_data,		/* ViewQuestVQ110 5 */
+	};
 
 	/* Read from global register the USB product and vendor IDs, just to
 	 * prove that we can communicate with the device.  This works, which
@@ -1491,37 +1358,13 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->subtype = id->driver_info;
 	sd->brightness = BRIGHTNESS_DEF;
 
-	switch (sd->subtype) {
-	case ViewQuestVQ110:
-		if (write_vector(gspca_dev, spca508_init_data))
-			return -1;
-		break;
-	default:
-/*	case MicroInnovationIC200: */
-/*	case IntelEasyPCCamera: */
-		if (write_vector(gspca_dev, spca508cs110_init_data))
-			return -1;
-		break;
-	case HamaUSBSightcam:
-		if (write_vector(gspca_dev, spca508_sightcam_init_data))
-			return -1;
-		break;
-	case HamaUSBSightcam2:
-		if (write_vector(gspca_dev, spca508_sightcam2_init_data))
-			return -1;
-		break;
-	case CreativeVista:
-		if (write_vector(gspca_dev, spca508_vista_init_data))
-			return -1;
-		break;
-	}
-	return 0;			/* success */
+	init_data = init_data_tb[sd->subtype];
+	return write_vector(gspca_dev, init_data);
 }
 
 /* this function is called at probe and resume time */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
-/*	write_vector(gspca_dev, spca508_open_data); */
 	return 0;
 }
 
@@ -1529,7 +1372,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 {
 	int mode;
 
-	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
 	reg_write(gspca_dev->dev, 0x8500, mode);
 	switch (mode) {
 	case 0:
@@ -1554,7 +1397,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
-			__u8 *data,			/* isoc packet */
+			u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
 	switch (data[0]) {
@@ -1567,7 +1410,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 				data, len);
 		break;
 	case 0xff:			/* drop */
-/*		gspca_dev->last_packet_type = DISCARD_PACKET; */
 		break;
 	default:
 		data += 1;
@@ -1581,7 +1423,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 brightness = sd->brightness;
+	u8 brightness = sd->brightness;
 
 	/* MX seem contrast */
 	reg_write(gspca_dev->dev, 0x8651, brightness);
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index c99c5e34e21..27e82b35f3e 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -34,8 +34,8 @@ struct sd {
 
 	__u16 exposure;			/* rev12a only */
 #define EXPOSURE_MIN 1
-#define EXPOSURE_DEF 200
-#define EXPOSURE_MAX (4095 - 900) /* see set_exposure */
+#define EXPOSURE_DEF 700		/* == 10 fps */
+#define EXPOSURE_MAX (2047 + 325)	/* see setexposure */
 
 	__u8 contrast;			/* rev72a only */
 #define CONTRAST_MIN 0x00
@@ -48,9 +48,9 @@ struct sd {
 #define BRIGHTNESS_MAX 0x3f
 
 	__u8 white;
-#define WHITE_MIN 1
-#define WHITE_DEF 0x40
-#define WHITE_MAX 0x7f
+#define HUE_MIN 1
+#define HUE_DEF 0x40
+#define HUE_MAX 0x7f
 
 	__u8 autogain;
 #define AUTOGAIN_MIN 0
@@ -58,9 +58,9 @@ struct sd {
 #define AUTOGAIN_MAX 1
 
 	__u8 gain;			/* rev12a only */
-#define GAIN_MIN 0x0
-#define GAIN_DEF 0x24
-#define GAIN_MAX 0x24
+#define GAIN_MIN 0
+#define GAIN_DEF 63
+#define GAIN_MAX 255
 
 #define EXPO12A_DEF 3
 	__u8 expo12a;		/* expo/gain? for rev 12a */
@@ -461,7 +461,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	}
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
-	sd->white = WHITE_DEF;
+	sd->white = HUE_DEF;
 	sd->exposure = EXPOSURE_DEF;
 	sd->autogain = AUTOGAIN_DEF;
 	sd->gain = GAIN_DEF;
@@ -549,8 +549,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 static void setexposure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int expo;
-	int clock_divider;
+	int i, expo = 0;
 
 	/* Register 0x8309 controls exposure for the spca561,
 	   the basic exposure setting goes from 1-2047, where 1 is completely
@@ -564,16 +563,22 @@ static void setexposure(struct gspca_dev *gspca_dev)
 	   configure a divider for the base framerate which us used at the
 	   exposure setting of 1-300. These bits configure the base framerate
 	   according to the following formula: fps = 60 / (value + 2) */
-	if (sd->exposure < 2048) {
-		expo = sd->exposure;
-		clock_divider = 0;
-	} else {
-		/* Add 900 to make the 0 setting of the second part of the
-		   exposure equal to the 2047 setting of the first part. */
-		expo = (sd->exposure - 2048) + 900;
-		clock_divider = 3;
+
+	/* We choose to use the high bits setting the fixed framerate divisor
+	   asap, as setting high basic exposure setting without the fixed
+	   divider in combination with high gains makes the cam stop */
+	int table[] =  { 0, 450, 550, 625, EXPOSURE_MAX };
+
+	for (i = 0; i < ARRAY_SIZE(table) - 1; i++) {
+		if (sd->exposure <= table[i + 1]) {
+			expo  = sd->exposure - table[i];
+			if (i)
+				expo += 300;
+			expo |= i << 11;
+			break;
+		}
 	}
-	expo |= clock_divider << 11;
+
 	gspca_dev->usb_buf[0] = expo;
 	gspca_dev->usb_buf[1] = expo >> 8;
 	reg_w_buf(gspca_dev, 0x8309, 2);
@@ -584,7 +589,16 @@ static void setgain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	gspca_dev->usb_buf[0] = sd->gain;
+	/* gain reg low 6 bits  0-63 gain, bit 6 and 7, both double the
+	   sensitivity when set, so 31 + one of them set == 63, and 15
+	   with both of them set == 63 */
+	if (sd->gain < 64)
+		gspca_dev->usb_buf[0] = sd->gain;
+	else if (sd->gain < 128)
+		gspca_dev->usb_buf[0] = (sd->gain / 2) | 0x40;
+	else
+		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xC0;
+
 	gspca_dev->usb_buf[1] = 0;
 	reg_w_buf(gspca_dev, 0x8335, 2);
 }
@@ -629,8 +643,7 @@ static int sd_start_12a(struct gspca_dev *gspca_dev)
 	reg_w_buf(gspca_dev, 0x8391, 8);
 	reg_w_buf(gspca_dev, 0x8390, 8);
 	setwhite(gspca_dev);
-	setautogain(gspca_dev);
-/*	setgain(gspca_dev);		*/
+	setgain(gspca_dev);
 	setexposure(gspca_dev);
 	return 0;
 }
@@ -762,18 +775,6 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 			i2c_write(gspca_dev, expotimes | pixelclk, 0x09);
 		}
 		break;
-	case Rev012A:
-		reg_r(gspca_dev, 0x8330, 2);
-		if (gspca_dev->usb_buf[1] > 0x08) {
-			gspca_dev->usb_buf[0] = ++sd->expo12a;
-			gspca_dev->usb_buf[1] = 0;
-			reg_w_buf(gspca_dev, 0x8339, 2);
-		} else if (gspca_dev->usb_buf[1] < 0x02) {
-			gspca_dev->usb_buf[0] = --sd->expo12a;
-			gspca_dev->usb_buf[1] = 0;
-			reg_w_buf(gspca_dev, 0x8339, 2);
-		}
-		break;
 	}
 }
 
@@ -928,13 +929,13 @@ static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
 static struct ctrl sd_ctrls_12a[] = {
 	{
 	    {
-		.id = V4L2_CID_DO_WHITE_BALANCE,
+		.id = V4L2_CID_HUE,
 		.type = V4L2_CTRL_TYPE_INTEGER,
-		.name = "White Balance",
-		.minimum = WHITE_MIN,
-		.maximum = WHITE_MAX,
+		.name = "Hue",
+		.minimum = HUE_MIN,
+		.maximum = HUE_MAX,
 		.step = 1,
-		.default_value = WHITE_DEF,
+		.default_value = HUE_DEF,
 	    },
 	    .set = sd_setwhite,
 	    .get = sd_getwhite,
@@ -954,19 +955,6 @@ static struct ctrl sd_ctrls_12a[] = {
 	},
 	{
 	    {
-		.id = V4L2_CID_AUTOGAIN,
-		.type = V4L2_CTRL_TYPE_BOOLEAN,
-		.name = "Auto Gain",
-		.minimum = AUTOGAIN_MIN,
-		.maximum = AUTOGAIN_MAX,
-		.step = 1,
-		.default_value = AUTOGAIN_DEF,
-	    },
-	    .set = sd_setautogain,
-	    .get = sd_getautogain,
-	},
-	{
-	    {
 		.id = V4L2_CID_GAIN,
 		.type = V4L2_CTRL_TYPE_INTEGER,
 		.name = "Gain",
@@ -983,13 +971,13 @@ static struct ctrl sd_ctrls_12a[] = {
 static struct ctrl sd_ctrls_72a[] = {
 	{
 	    {
-		.id = V4L2_CID_DO_WHITE_BALANCE,
+		.id = V4L2_CID_HUE,
 		.type = V4L2_CTRL_TYPE_INTEGER,
-		.name = "White Balance",
-		.minimum = WHITE_MIN,
-		.maximum = WHITE_MAX,
+		.name = "Hue",
+		.minimum = HUE_MIN,
+		.maximum = HUE_MAX,
 		.step = 1,
-		.default_value = WHITE_DEF,
+		.default_value = HUE_DEF,
 	    },
 	    .set = sd_setwhite,
 	    .get = sd_getwhite,
@@ -1046,7 +1034,6 @@ static const struct sd_desc sd_desc_12a = {
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
-/*	.dq_callback = do_autogain,	 * fixme */
 };
 static const struct sd_desc sd_desc_72a = {
 	.name = MODULE_NAME,
diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c
index 2e1cdf068fd..715a68f0156 100644
--- a/drivers/media/video/gspca/sq905.c
+++ b/drivers/media/video/gspca/sq905.c
@@ -309,6 +309,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *dev = (struct sd *) gspca_dev;
 
 	/* We don't use the buffer gspca allocates so make it small. */
+	cam->bulk = 1;
 	cam->bulk_size = 64;
 
 	INIT_WORK(&dev->work_struct, sq905_dostream);
diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/video/gspca/sq905c.c
index 0bcb74a1b14..91689250543 100644
--- a/drivers/media/video/gspca/sq905c.c
+++ b/drivers/media/video/gspca/sq905c.c
@@ -206,6 +206,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->nmodes = 1;
 	/* We don't use the buffer gspca allocates so make it small. */
 	cam->bulk_size = 32;
+	cam->bulk = 1;
 	INIT_WORK(&dev->work_struct, sq905c_dostream);
 	return 0;
 }
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index 9dff2e65b11..e573c340632 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -293,8 +293,6 @@ static void stv06xx_stopN(struct gspca_dev *gspca_dev)
 		goto out;
 
 	err = sd->sensor->stop(sd);
-	if (err < 0)
-		goto out;
 
 out:
 	if (err < 0)
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c
index 69c77c932fc..11a0c002f5d 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c
@@ -80,12 +80,26 @@ static const struct ctrl vv6410_ctrl[] = {
 			.minimum	= 0,
 			.maximum	= 15,
 			.step		= 1,
-			.default_value  = 0
+			.default_value  = 10
 		},
 		.set = vv6410_set_analog_gain,
 		.get = vv6410_get_analog_gain
+	},
+#define EXPOSURE_IDX 3
+	{
+		{
+			.id		= V4L2_CID_EXPOSURE,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "exposure",
+			.minimum	= 0,
+			.maximum	= 32768,
+			.step		= 1,
+			.default_value  = 20000
+		},
+		.set = vv6410_set_exposure,
+		.get = vv6410_get_exposure
 	}
-};
+	};
 
 static int vv6410_probe(struct sd *sd)
 {
@@ -121,6 +135,7 @@ static int vv6410_probe(struct sd *sd)
 static int vv6410_init(struct sd *sd)
 {
 	int err = 0, i;
+	s32 *sensor_settings = sd->sensor_priv;
 
 	for (i = 0; i < ARRAY_SIZE(stv_bridge_init); i++) {
 		/* if NULL then len contains single value */
@@ -142,6 +157,16 @@ static int vv6410_init(struct sd *sd)
 
 	err = stv06xx_write_sensor_bytes(sd, (u8 *) vv6410_sensor_init,
 					 ARRAY_SIZE(vv6410_sensor_init));
+	if (err < 0)
+		return err;
+
+	err = vv6410_set_exposure(&sd->gspca_dev,
+				   sensor_settings[EXPOSURE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = vv6410_set_analog_gain(&sd->gspca_dev,
+				      sensor_settings[GAIN_IDX]);
 
 	return (err < 0) ? err : 0;
 }
@@ -318,3 +343,50 @@ static int vv6410_set_analog_gain(struct gspca_dev *gspca_dev, __s32 val)
 
 	return (err < 0) ? err : 0;
 }
+
+static int vv6410_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[EXPOSURE_IDX];
+
+	PDEBUG(D_V4L2, "Read exposure %d", *val);
+
+	return 0;
+}
+
+static int vv6410_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+	unsigned int fine, coarse;
+
+	sensor_settings[EXPOSURE_IDX] = val;
+
+	val = (val * val >> 14) + val / 4;
+
+	fine = val % VV6410_CIF_LINELENGTH;
+	coarse = min(512, val / VV6410_CIF_LINELENGTH);
+
+	PDEBUG(D_V4L2, "Set coarse exposure to %d, fine expsure to %d",
+	       coarse, fine);
+
+	err = stv06xx_write_sensor(sd, VV6410_FINEH, fine >> 8);
+	if (err < 0)
+		goto out;
+
+	err = stv06xx_write_sensor(sd, VV6410_FINEL, fine & 0xff);
+	if (err < 0)
+		goto out;
+
+	err = stv06xx_write_sensor(sd, VV6410_COARSEH, coarse >> 8);
+	if (err < 0)
+		goto out;
+
+	err = stv06xx_write_sensor(sd, VV6410_COARSEL, coarse & 0xff);
+
+out:
+	return err;
+}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
index 95ac55891bd..487d4055534 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
@@ -173,6 +173,8 @@
 #define VV6410_SUBSAMPLE		0x01
 #define VV6410_CROP_TO_QVGA		0x02
 
+#define VV6410_CIF_LINELENGTH		415
+
 static int vv6410_probe(struct sd *sd);
 static int vv6410_start(struct sd *sd);
 static int vv6410_init(struct sd *sd);
@@ -187,6 +189,8 @@ static int vv6410_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
 static int vv6410_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
 static int vv6410_get_analog_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int vv6410_set_analog_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int vv6410_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int vv6410_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
 
 const struct stv06xx_sensor stv06xx_sensor_vv6410 = {
 	.name = "ST VV6410",
@@ -242,12 +246,6 @@ static const u8 vv6410_sensor_init[][2] = {
 	/* Pre-clock generator divide off */
 	{VV6410_DATAFORMAT,	BIT(7) | BIT(0)},
 
-	/* Exposure registers */
-	{VV6410_FINEH,		VV6410_FINE_EXPOSURE >> 8},
-	{VV6410_FINEL,		VV6410_FINE_EXPOSURE & 0xff},
-	{VV6410_COARSEH,	VV6410_COARSE_EXPOSURE >> 8},
-	{VV6410_COARSEL,	VV6410_COARSE_EXPOSURE & 0xff},
-	{VV6410_ANALOGGAIN,	0xf0 | VV6410_DEFAULT_GAIN},
 	{VV6410_CLKDIV,		VV6410_CLK_DIV_2},
 
 	/* System registers */
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index c2b8c10c075..9623f294bda 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -32,9 +32,6 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	__u8 packet[ISO_MAX_SIZE + 128];
-				/* !! no more than 128 ff in an ISO packet */
-
 	unsigned char brightness;
 	unsigned char contrast;
 	unsigned char colors;
@@ -1103,7 +1100,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i, sof = 0;
-	unsigned char *s, *d;
 	static unsigned char ffd9[] = {0xff, 0xd9};
 
 /* frames are jpeg 4.1.1 without 0xff escape */
@@ -1177,22 +1173,19 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	}
 
 	/* add 0x00 after 0xff */
-	for (i = len; --i >= 0; )
-		if (data[i] == 0xff)
-			break;
-	if (i < 0) {			/* no 0xff */
-		gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
-		return;
-	}
-	s = data;
-	d = sd->packet;
-	for (i = 0; i < len; i++) {
-		*d++ = *s++;
-		if (s[-1] == 0xff)
-			*d++ = 0x00;
-	}
-	gspca_frame_add(gspca_dev, INTER_PACKET, frame,
-			sd->packet, d - sd->packet);
+	i = 0;
+	do {
+		if (data[i] == 0xff) {
+			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+					data, i + 1);
+			len -= i;
+			data += i;
+			*data = 0x00;
+			i = 0;
+		}
+		i++;
+	} while (i < len);
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
 static void setbrightness(struct gspca_dev *gspca_dev)
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index f63e37e2e4f..404214b8cd2 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -697,7 +697,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		return -EINVAL;
 	}
 
-	if (sd->sensor != SENSOR_OTHER) {
+	if (sd->sensor == SENSOR_OM6802) {
 		reg_w_buf(gspca_dev, n1, sizeof n1);
 		i = 5;
 		while (--i >= 0) {
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index e4e933c400b..26dd155efcc 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -42,7 +42,7 @@ struct sd {
 	char bridge;
 #define BRIDGE_VC0321 0
 #define BRIDGE_VC0323 1
-	char sensor;
+	u8 sensor;
 #define SENSOR_HV7131R 0
 #define SENSOR_MI0360 1
 #define SENSOR_MI1310_SOC 2
@@ -159,17 +159,17 @@ static const struct v4l2_pix_format vc0323_mode[] = {
 		.priv = 2},
 };
 static const struct v4l2_pix_format bi_mode[] = {
-	{320, 240, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
+	{320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
-	{640, 480, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
+	{640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
-	{1280, 1024, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
+	{1280, 1024, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
 		.bytesperline = 1280,
 		.sizeimage = 1280 * 1024 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
@@ -2453,6 +2453,17 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct usb_device *dev = gspca_dev->dev;
 	struct cam *cam;
 	int sensor;
+	static u8 npkt[] = {	/* number of packets per ISOC message */
+		64,		/* HV7131R 0 */
+		32,		/* MI0360 1 */
+		32,		/* MI1310_SOC 2 */
+		64,		/* MI1320 3 */
+		128,		/* MI1320_SOC 4 */
+		32,		/* OV7660 5 */
+		64,		/* OV7670 6 */
+		128,		/* PO1200 7 */
+		128,		/* PO3130NC 8 */
+	};
 
 	cam = &gspca_dev->cam;
 	sd->bridge = id->driver_info;
@@ -2508,6 +2519,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		case SENSOR_MI1320_SOC:
 			cam->cam_mode = bi_mode;
 			cam->nmodes = ARRAY_SIZE(bi_mode);
+			cam->input_flags = V4L2_IN_ST_VFLIP |
+					   V4L2_IN_ST_HFLIP;
 			break;
 		default:
 			cam->cam_mode = vc0323_mode;
@@ -2515,6 +2528,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			break;
 		}
 	}
+	cam->npkt = npkt[sd->sensor];
 
 	sd->hflip = HFLIP_DEF;
 	sd->vflip = VFLIP_DEF;
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 4fe01d8b6c8..08422d315e6 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -6307,7 +6307,7 @@ static __u16 i2c_read(struct gspca_dev *gspca_dev,
 	retbyte = reg_r_i(gspca_dev, 0x0091);		/* read status */
 	retval = reg_r_i(gspca_dev, 0x0095);		/* read Lowbyte */
 	retval |= reg_r_i(gspca_dev, 0x0096) << 8;	/* read Hightbyte */
-	PDEBUG(D_USBO, "i2c r [%02x] -> %04x (%02x)",
+	PDEBUG(D_USBI, "i2c r [%02x] -> %04x (%02x)",
 			reg, retval, retbyte);
 	return retval;
 }
@@ -6868,7 +6868,6 @@ static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
 	{0x8001, 0x13},
 	{0x8000, 0x14},		/* CS2102K */
 	{0x8400, 0x15},		/* TAS5130K */
-	{0x4001, 0x16},		/* ADCM2700 */
 };
 
 static int vga_3wr_probe(struct gspca_dev *gspca_dev)
@@ -6904,12 +6903,15 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 	retword |= reg_r(gspca_dev, 0x000a);
 	PDEBUG(D_PROBE, "probe 3wr vga 1 0x%04x", retword);
 	reg_r(gspca_dev, 0x0010);
-	/* this is tested only once anyway */
-	for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
-		if (chipset_revision_sensor[i].revision == retword) {
-			sd->chip_revision = retword;
-			send_unknown(dev, SENSOR_PB0330);
-			return chipset_revision_sensor[i].internal_sensor_id;
+	/* value 0x4001 is meaningless */
+	if (retword != 0x4001) {
+		for (i = 0; i < ARRAY_SIZE(chipset_revision_sensor); i++) {
+			if (chipset_revision_sensor[i].revision == retword) {
+				sd->chip_revision = retword;
+				send_unknown(dev, SENSOR_PB0330);
+				return chipset_revision_sensor[i]
+							.internal_sensor_id;
+			}
 		}
 	}
 
@@ -6980,12 +6982,12 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 	reg_w(dev, 0x01, 0x0001);
 	reg_w(dev, 0x03, 0x0012);
 	reg_w(dev, 0x01, 0x0012);
-	reg_w(dev, 0x05, 0x0001);
+	reg_w(dev, 0x05, 0x0012);
 	reg_w(dev, 0xd3, 0x008b);
 	retword = i2c_read(gspca_dev, 0x01);
 	if (retword != 0) {
 		PDEBUG(D_PROBE, "probe 3wr vga type 0a ? ret: %04x", retword);
-		return retword;
+		return 0x16;			/* adcm2700 (6100/6200) */
 	}
 	return -1;
 }
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 3e6ffee8dfe..ccd47f57f42 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -181,7 +181,7 @@ static int hdpvr_submit_buffers(struct hdpvr_device *dev)
 				 buff_list);
 		if (buf->status != BUFSTAT_AVAILABLE) {
 			v4l2_err(&dev->v4l2_dev,
-				 "buffer not marked as availbale\n");
+				 "buffer not marked as available\n");
 			ret = -EFAULT;
 			goto err;
 		}
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index 8e1463ee1b6..71c211402eb 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -224,7 +224,7 @@ static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
 {
 	DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index));
 
-	if (i->index < 0 || i->index >= HEXIUM_INPUTS)
+	if (i->index >= HEXIUM_INPUTS)
 		return -EINVAL;
 
 	memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input));
diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index 2bc39f62845..39d65ca41c6 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -325,7 +325,7 @@ static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
 {
 	DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index));
 
-	if (i->index < 0 || i->index >= HEXIUM_INPUTS)
+	if (i->index >= HEXIUM_INPUTS)
 		return -EINVAL;
 
 	memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input));
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 092c7da0f37..86f2fefe1ed 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -74,7 +74,7 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw,
 	int start, range, toggle, dev, code, ircode;
 
 	/* poll IR chip */
-	if (size != i2c_master_recv(&ir->c,buf,size))
+	if (size != i2c_master_recv(ir->c, buf, size))
 		return -EIO;
 
 	/* split rc5 data block ... */
@@ -137,7 +137,7 @@ static int get_key_pixelview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char b;
 
 	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c,&b,1)) {
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
 		dprintk(1,"read error\n");
 		return -EIO;
 	}
@@ -151,7 +151,7 @@ static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char b;
 
 	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c,&b,1)) {
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
 		dprintk(1,"read error\n");
 		return -EIO;
 	}
@@ -171,7 +171,7 @@ static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char buf[4];
 
 	/* poll IR chip */
-	if (4 != i2c_master_recv(&ir->c,buf,4)) {
+	if (4 != i2c_master_recv(ir->c, buf, 4)) {
 		dprintk(1,"read error\n");
 		return -EIO;
 	}
@@ -195,7 +195,7 @@ static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char b;
 
 	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c,&b,1)) {
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
 		dprintk(1,"read error\n");
 		return -EIO;
 	}
@@ -222,12 +222,12 @@ static int get_key_avermedia_cardbus(struct IR_i2c *ir,
 				     u32 *ir_key, u32 *ir_raw)
 {
 	unsigned char subaddr, key, keygroup;
-	struct i2c_msg msg[] = { { .addr = ir->c.addr, .flags = 0,
+	struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0,
 				   .buf = &subaddr, .len = 1},
-				 { .addr = ir->c.addr, .flags = I2C_M_RD,
+				 { .addr = ir->c->addr, .flags = I2C_M_RD,
 				  .buf = &key, .len = 1} };
 	subaddr = 0x0d;
-	if (2 != i2c_transfer(ir->c.adapter, msg, 2)) {
+	if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
 		dprintk(1, "read error\n");
 		return -EIO;
 	}
@@ -237,7 +237,7 @@ static int get_key_avermedia_cardbus(struct IR_i2c *ir,
 
 	subaddr = 0x0b;
 	msg[1].buf = &keygroup;
-	if (2 != i2c_transfer(ir->c.adapter, msg, 2)) {
+	if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
 		dprintk(1, "read error\n");
 		return -EIO;
 	}
@@ -286,7 +286,7 @@ static void ir_work(struct work_struct *work)
 
 	/* MSI TV@nywhere Plus requires more frequent polling
 	   otherwise it will miss some keypresses */
-	if (ir->c.adapter->id == I2C_HW_SAA7134 && ir->c.addr == 0x30)
+	if (ir->c->adapter->id == I2C_HW_SAA7134 && ir->c->addr == 0x30)
 		polling_interval = 50;
 
 	ir_key_poll(ir);
@@ -295,34 +295,15 @@ static void ir_work(struct work_struct *work)
 
 /* ----------------------------------------------------------------------- */
 
-static int ir_attach(struct i2c_adapter *adap, int addr,
-		      unsigned short flags, int kind);
-static int ir_detach(struct i2c_client *client);
-static int ir_probe(struct i2c_adapter *adap);
-
-static struct i2c_driver driver = {
-	.driver = {
-		.name   = "ir-kbd-i2c",
-	},
-	.id             = I2C_DRIVERID_INFRARED,
-	.attach_adapter = ir_probe,
-	.detach_client  = ir_detach,
-};
-
-static struct i2c_client client_template =
-{
-	.name = "unset",
-	.driver = &driver
-};
-
-static int ir_attach(struct i2c_adapter *adap, int addr,
-		     unsigned short flags, int kind)
+static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	IR_KEYTAB_TYPE *ir_codes = NULL;
-	char *name;
+	const char *name = NULL;
 	int ir_type;
 	struct IR_i2c *ir;
 	struct input_dev *input_dev;
+	struct i2c_adapter *adap = client->adapter;
+	unsigned short addr = client->addr;
 	int err;
 
 	ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL);
@@ -332,13 +313,9 @@ static int ir_attach(struct i2c_adapter *adap, int addr,
 		goto err_out_free;
 	}
 
-	ir->c = client_template;
+	ir->c = client;
 	ir->input = input_dev;
-
-	ir->c.adapter = adap;
-	ir->c.addr    = addr;
-
-	i2c_set_clientdata(&ir->c, ir);
+	i2c_set_clientdata(client, ir);
 
 	switch(addr) {
 	case 0x64:
@@ -403,44 +380,46 @@ static int ir_attach(struct i2c_adapter *adap, int addr,
 		ir_codes    = ir_codes_avermedia_cardbus;
 		break;
 	default:
-		/* shouldn't happen */
-		printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n", addr);
+		dprintk(1, DEVNAME ": Unsupported i2c address 0x%02x\n", addr);
 		err = -ENODEV;
 		goto err_out_free;
 	}
 
-	/* Sets name */
-	snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (%s)", name);
-	ir->ir_codes = ir_codes;
+	/* Let the caller override settings */
+	if (client->dev.platform_data) {
+		const struct IR_i2c_init_data *init_data =
+						client->dev.platform_data;
 
-	/* register i2c device
-	 * At device register, IR codes may be changed to be
-	 * board dependent.
-	 */
-	err = i2c_attach_client(&ir->c);
-	if (err)
-		goto err_out_free;
+		ir_codes = init_data->ir_codes;
+		name = init_data->name;
+		ir->get_key = init_data->get_key;
+	}
 
-	/* If IR not supported or disabled, unregisters driver */
-	if (ir->get_key == NULL) {
+	/* Make sure we are all setup before going on */
+	if (!name || !ir->get_key || !ir_codes) {
+		dprintk(1, DEVNAME ": Unsupported device at address 0x%02x\n",
+			addr);
 		err = -ENODEV;
-		goto err_out_detach;
+		goto err_out_free;
 	}
 
-	/* Phys addr can only be set after attaching (for ir->c.dev) */
+	/* Sets name */
+	snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name);
+	ir->ir_codes = ir_codes;
+
 	snprintf(ir->phys, sizeof(ir->phys), "%s/%s/ir0",
-		 dev_name(&ir->c.adapter->dev),
-		 dev_name(&ir->c.dev));
+		 dev_name(&adap->dev),
+		 dev_name(&client->dev));
 
 	/* init + register input device */
 	ir_input_init(input_dev, &ir->ir, ir_type, ir->ir_codes);
 	input_dev->id.bustype = BUS_I2C;
-	input_dev->name       = ir->c.name;
+	input_dev->name       = ir->name;
 	input_dev->phys       = ir->phys;
 
 	err = input_register_device(ir->input);
 	if (err)
-		goto err_out_detach;
+		goto err_out_free;
 
 	printk(DEVNAME ": %s detected at %s [%s]\n",
 	       ir->input->name, ir->input->phys, adap->name);
@@ -451,135 +430,42 @@ static int ir_attach(struct i2c_adapter *adap, int addr,
 
 	return 0;
 
- err_out_detach:
-	i2c_detach_client(&ir->c);
  err_out_free:
 	input_free_device(input_dev);
 	kfree(ir);
 	return err;
 }
 
-static int ir_detach(struct i2c_client *client)
+static int ir_remove(struct i2c_client *client)
 {
 	struct IR_i2c *ir = i2c_get_clientdata(client);
 
 	/* kill outstanding polls */
 	cancel_delayed_work_sync(&ir->work);
 
-	/* unregister devices */
+	/* unregister device */
 	input_unregister_device(ir->input);
-	i2c_detach_client(&ir->c);
 
 	/* free memory */
 	kfree(ir);
 	return 0;
 }
 
-static int ir_probe(struct i2c_adapter *adap)
-{
-
-	/* The external IR receiver is at i2c address 0x34 (0x35 for
-	   reads).  Future Hauppauge cards will have an internal
-	   receiver at 0x30 (0x31 for reads).  In theory, both can be
-	   fitted, and Hauppauge suggest an external overrides an
-	   internal.
-
-	   That's why we probe 0x1a (~0x34) first. CB
-	*/
-
-	static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1};
-	static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, 0x2d, -1 };
-	static const int probe_em28XX[] = { 0x30, 0x47, -1 };
-	static const int probe_cx88[] = { 0x18, 0x6b, 0x71, -1 };
-	static const int probe_cx23885[] = { 0x6b, -1 };
-	const int *probe;
-	struct i2c_msg msg = {
-		.flags = I2C_M_RD,
-		.len = 0,
-		.buf = NULL,
-	};
-	int i, rc;
-
-	switch (adap->id) {
-	case I2C_HW_B_BT848:
-		probe = probe_bttv;
-		break;
-	case I2C_HW_B_CX2341X:
-		probe = probe_bttv;
-		break;
-	case I2C_HW_SAA7134:
-		probe = probe_saa7134;
-		break;
-	case I2C_HW_B_EM28XX:
-		probe = probe_em28XX;
-		break;
-	case I2C_HW_B_CX2388x:
-		probe = probe_cx88;
-		break;
-	case I2C_HW_B_CX23885:
-		probe = probe_cx23885;
-		break;
-	default:
-		return 0;
-	}
-
-	for (i = 0; -1 != probe[i]; i++) {
-		msg.addr = probe[i];
-		rc = i2c_transfer(adap, &msg, 1);
-		dprintk(1,"probe 0x%02x @ %s: %s\n",
-			probe[i], adap->name,
-			(1 == rc) ? "yes" : "no");
-		if (1 == rc) {
-			ir_attach(adap, probe[i], 0, 0);
-			return 0;
-		}
-	}
-
-	/* Special case for MSI TV@nywhere Plus remote */
-	if (adap->id == I2C_HW_SAA7134) {
-		u8 temp;
-
-		/* MSI TV@nywhere Plus controller doesn't seem to
-		   respond to probes unless we read something from
-		   an existing device. Weird... */
-
-		msg.addr = 0x50;
-		rc = i2c_transfer(adap, &msg, 1);
-			dprintk(1, "probe 0x%02x @ %s: %s\n",
-			msg.addr, adap->name,
-			(1 == rc) ? "yes" : "no");
-
-		/* Now do the probe. The controller does not respond
-		   to 0-byte reads, so we use a 1-byte read instead. */
-		msg.addr = 0x30;
-		msg.len = 1;
-		msg.buf = &temp;
-		rc = i2c_transfer(adap, &msg, 1);
-		dprintk(1, "probe 0x%02x @ %s: %s\n",
-			msg.addr, adap->name,
-			(1 == rc) ? "yes" : "no");
-		if (1 == rc)
-			ir_attach(adap, msg.addr, 0, 0);
-	}
-
-	/* Special case for AVerMedia Cardbus remote */
-	if (adap->id == I2C_HW_SAA7134) {
-		unsigned char subaddr, data;
-		struct i2c_msg msg[] = { { .addr = 0x40, .flags = 0,
-					   .buf = &subaddr, .len = 1},
-					 { .addr = 0x40, .flags = I2C_M_RD,
-					   .buf = &data, .len = 1} };
-		subaddr = 0x0d;
-		rc = i2c_transfer(adap, msg, 2);
-		dprintk(1, "probe 0x%02x/0x%02x @ %s: %s\n",
-			msg[0].addr, subaddr, adap->name,
-			(2 == rc) ? "yes" : "no");
-		if (2 == rc)
-			ir_attach(adap, msg[0].addr, 0, 0);
-	}
+static const struct i2c_device_id ir_kbd_id[] = {
+	/* Generic entry for any IR receiver */
+	{ "ir_video", 0 },
+	/* IR device specific entries could be added here */
+	{ }
+};
 
-	return 0;
-}
+static struct i2c_driver driver = {
+	.driver = {
+		.name   = "ir-kbd-i2c",
+	},
+	.probe          = ir_probe,
+	.remove         = ir_remove,
+	.id_table       = ir_kbd_id,
+};
 
 /* ----------------------------------------------------------------------- */
 
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index db2ac9a99ac..558f8a837ff 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -455,7 +455,7 @@ static void ivtv_process_eeprom(struct ivtv *itv)
 			break;
 	}
 	if (tv.tuner_type == TUNER_ABSENT)
-		IVTV_ERR("tveeprom cannot autodetect tuner!");
+		IVTV_ERR("tveeprom cannot autodetect tuner!\n");
 
 	if (itv->options.tuner == -1)
 		itv->options.tuner = tv.tuner_type;
@@ -946,17 +946,14 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 	if (itv == NULL)
 		return -ENOMEM;
 	itv->pdev = pdev;
-	itv->instance = atomic_inc_return(&ivtv_instance) - 1;
+	itv->instance = v4l2_device_set_name(&itv->v4l2_dev, "ivtv",
+						&ivtv_instance);
 
 	retval = v4l2_device_register(&pdev->dev, &itv->v4l2_dev);
 	if (retval) {
 		kfree(itv);
 		return retval;
 	}
-	/* "ivtv + PCI ID" is a bit of a mouthful, so use
-	   "ivtv + instance" instead. */
-	snprintf(itv->v4l2_dev.name, sizeof(itv->v4l2_dev.name),
-			"ivtv%d", itv->instance);
 	IVTV_INFO("Initializing card %d\n", itv->instance);
 
 	ivtv_process_options(itv);
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 9e3d32b8004..e52aa322b13 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -579,9 +579,11 @@ static struct i2c_client ivtv_i2c_client_template = {
 	.name = "ivtv internal",
 };
 
-/* init + register i2c algo-bit adapter */
+/* init + register i2c adapter + instantiate IR receiver */
 int init_ivtv_i2c(struct ivtv *itv)
 {
+	int retval;
+
 	IVTV_DEBUG_I2C("i2c init\n");
 
 	/* Sanity checks for the I2C hardware arrays. They must be the
@@ -619,9 +621,37 @@ int init_ivtv_i2c(struct ivtv *itv)
 	ivtv_setsda(itv, 1);
 
 	if (itv->options.newi2c > 0)
-		return i2c_add_adapter(&itv->i2c_adap);
+		retval = i2c_add_adapter(&itv->i2c_adap);
 	else
-		return i2c_bit_add_bus(&itv->i2c_adap);
+		retval = i2c_bit_add_bus(&itv->i2c_adap);
+
+	/* Instantiate the IR receiver device, if present */
+	if (retval == 0) {
+		struct i2c_board_info info;
+		/* The external IR receiver is at i2c address 0x34 (0x35 for
+		   reads).  Future Hauppauge cards will have an internal
+		   receiver at 0x30 (0x31 for reads).  In theory, both can be
+		   fitted, and Hauppauge suggest an external overrides an
+		   internal.
+
+		   That's why we probe 0x1a (~0x34) first. CB
+		*/
+		const unsigned short addr_list[] = {
+			0x1a,	/* Hauppauge IR external */
+			0x18,	/* Hauppauge IR internal */
+			0x71,	/* Hauppauge IR (PVR150) */
+			0x64,	/* Pixelview IR */
+			0x30,	/* KNC ONE IR */
+			0x6b,	/* Adaptec IR */
+			I2C_CLIENT_END
+		};
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+		i2c_new_probed_device(&itv->i2c_adap, &info, addr_list);
+	}
+
+	return retval;
 }
 
 void exit_ivtv_i2c(struct ivtv *itv)
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index c342a9fe983..99f3c39a118 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -709,7 +709,7 @@ static int ivtv_itvc(struct ivtv *itv, unsigned int cmd, void *arg)
 	else if (itv->has_cx23415 && regs->reg >= IVTV_DECODER_OFFSET &&
 			regs->reg < IVTV_DECODER_OFFSET + IVTV_DECODER_SIZE)
 		reg_start = itv->dec_mem - IVTV_DECODER_OFFSET;
-	else if (regs->reg >= 0 && regs->reg < IVTV_ENCODER_SIZE)
+	else if (regs->reg < IVTV_ENCODER_SIZE)
 		reg_start = itv->enc_mem;
 	else
 		return -EINVAL;
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 684f62fa789..459c04cbf69 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -75,53 +75,50 @@ struct mt9m001 {
 	unsigned char autoexposure;
 };
 
-static int reg_read(struct soc_camera_device *icd, const u8 reg)
+static int reg_read(struct i2c_client *client, const u8 reg)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	struct i2c_client *client = mt9m001->client;
 	s32 data = i2c_smbus_read_word_data(client, reg);
 	return data < 0 ? data : swab16(data);
 }
 
-static int reg_write(struct soc_camera_device *icd, const u8 reg,
+static int reg_write(struct i2c_client *client, const u8 reg,
 		     const u16 data)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	return i2c_smbus_write_word_data(mt9m001->client, reg, swab16(data));
+	return i2c_smbus_write_word_data(client, reg, swab16(data));
 }
 
-static int reg_set(struct soc_camera_device *icd, const u8 reg,
+static int reg_set(struct i2c_client *client, const u8 reg,
 		   const u16 data)
 {
 	int ret;
 
-	ret = reg_read(icd, reg);
+	ret = reg_read(client, reg);
 	if (ret < 0)
 		return ret;
-	return reg_write(icd, reg, ret | data);
+	return reg_write(client, reg, ret | data);
 }
 
-static int reg_clear(struct soc_camera_device *icd, const u8 reg,
+static int reg_clear(struct i2c_client *client, const u8 reg,
 		     const u16 data)
 {
 	int ret;
 
-	ret = reg_read(icd, reg);
+	ret = reg_read(client, reg);
 	if (ret < 0)
 		return ret;
-	return reg_write(icd, reg, ret & ~data);
+	return reg_write(client, reg, ret & ~data);
 }
 
 static int mt9m001_init(struct soc_camera_device *icd)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(icd->control);
+	struct soc_camera_link *icl = client->dev.platform_data;
 	int ret;
 
 	dev_dbg(icd->vdev->parent, "%s\n", __func__);
 
 	if (icl->power) {
-		ret = icl->power(&mt9m001->client->dev, 1);
+		ret = icl->power(&client->dev, 1);
 		if (ret < 0) {
 			dev_err(icd->vdev->parent,
 				"Platform failed to power-on the camera.\n");
@@ -131,49 +128,53 @@ static int mt9m001_init(struct soc_camera_device *icd)
 
 	/* The camera could have been already on, we reset it additionally */
 	if (icl->reset)
-		ret = icl->reset(&mt9m001->client->dev);
+		ret = icl->reset(&client->dev);
 	else
 		ret = -ENODEV;
 
 	if (ret < 0) {
 		/* Either no platform reset, or platform reset failed */
-		ret = reg_write(icd, MT9M001_RESET, 1);
+		ret = reg_write(client, MT9M001_RESET, 1);
 		if (!ret)
-			ret = reg_write(icd, MT9M001_RESET, 0);
+			ret = reg_write(client, MT9M001_RESET, 0);
 	}
 	/* Disable chip, synchronous option update */
 	if (!ret)
-		ret = reg_write(icd, MT9M001_OUTPUT_CONTROL, 0);
+		ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
 
 	return ret;
 }
 
 static int mt9m001_release(struct soc_camera_device *icd)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(icd->control);
+	struct soc_camera_link *icl = client->dev.platform_data;
 
 	/* Disable the chip */
-	reg_write(icd, MT9M001_OUTPUT_CONTROL, 0);
+	reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
 
 	if (icl->power)
-		icl->power(&mt9m001->client->dev, 0);
+		icl->power(&client->dev, 0);
 
 	return 0;
 }
 
 static int mt9m001_start_capture(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
+
 	/* Switch to master "normal" mode */
-	if (reg_write(icd, MT9M001_OUTPUT_CONTROL, 2) < 0)
+	if (reg_write(client, MT9M001_OUTPUT_CONTROL, 2) < 0)
 		return -EIO;
 	return 0;
 }
 
 static int mt9m001_stop_capture(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
+
 	/* Stop sensor readout */
-	if (reg_write(icd, MT9M001_OUTPUT_CONTROL, 0) < 0)
+	if (reg_write(client, MT9M001_OUTPUT_CONTROL, 0) < 0)
 		return -EIO;
 	return 0;
 }
@@ -222,28 +223,29 @@ static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
 static int mt9m001_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
 	int ret;
 	const u16 hblank = 9, vblank = 25;
 
 	/* Blanking and start values - default... */
-	ret = reg_write(icd, MT9M001_HORIZONTAL_BLANKING, hblank);
+	ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank);
 	if (!ret)
-		ret = reg_write(icd, MT9M001_VERTICAL_BLANKING, vblank);
+		ret = reg_write(client, MT9M001_VERTICAL_BLANKING, vblank);
 
 	/* The caller provides a supported format, as verified per
 	 * call to icd->try_fmt() */
 	if (!ret)
-		ret = reg_write(icd, MT9M001_COLUMN_START, rect->left);
+		ret = reg_write(client, MT9M001_COLUMN_START, rect->left);
 	if (!ret)
-		ret = reg_write(icd, MT9M001_ROW_START, rect->top);
+		ret = reg_write(client, MT9M001_ROW_START, rect->top);
 	if (!ret)
-		ret = reg_write(icd, MT9M001_WINDOW_WIDTH, rect->width - 1);
+		ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect->width - 1);
 	if (!ret)
-		ret = reg_write(icd, MT9M001_WINDOW_HEIGHT,
+		ret = reg_write(client, MT9M001_WINDOW_HEIGHT,
 				rect->height + icd->y_skip_top - 1);
 	if (!ret && mt9m001->autoexposure) {
-		ret = reg_write(icd, MT9M001_SHUTTER_WIDTH,
+		ret = reg_write(client, MT9M001_SHUTTER_WIDTH,
 				rect->height + icd->y_skip_top + vblank);
 		if (!ret) {
 			const struct v4l2_queryctrl *qctrl =
@@ -312,16 +314,16 @@ static int mt9m001_get_chip_id(struct soc_camera_device *icd,
 static int mt9m001_get_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
+	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
 
-	if (reg->match.addr != mt9m001->client->addr)
+	if (reg->match.addr != client->addr)
 		return -ENODEV;
 
 	reg->size = 2;
-	reg->val = reg_read(icd, reg->reg);
+	reg->val = reg_read(client, reg->reg);
 
 	if (reg->val > 0xffff)
 		return -EIO;
@@ -332,15 +334,15 @@ static int mt9m001_get_register(struct soc_camera_device *icd,
 static int mt9m001_set_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
+	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
 
-	if (reg->match.addr != mt9m001->client->addr)
+	if (reg->match.addr != client->addr)
 		return -ENODEV;
 
-	if (reg_write(icd, reg->reg, reg->val) < 0)
+	if (reg_write(client, reg->reg, reg->val) < 0)
 		return -EIO;
 
 	return 0;
@@ -416,12 +418,13 @@ static struct soc_camera_ops mt9m001_ops = {
 
 static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
 	int data;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		data = reg_read(icd, MT9M001_READ_OPTIONS2);
+		data = reg_read(client, MT9M001_READ_OPTIONS2);
 		if (data < 0)
 			return -EIO;
 		ctrl->value = !!(data & 0x8000);
@@ -435,6 +438,7 @@ static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_contro
 
 static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
 	const struct v4l2_queryctrl *qctrl;
 	int data;
@@ -447,9 +451,9 @@ static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_contro
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
 		if (ctrl->value)
-			data = reg_set(icd, MT9M001_READ_OPTIONS2, 0x8000);
+			data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000);
 		else
-			data = reg_clear(icd, MT9M001_READ_OPTIONS2, 0x8000);
+			data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000);
 		if (data < 0)
 			return -EIO;
 		break;
@@ -463,7 +467,7 @@ static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_contro
 			data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
 
 			dev_dbg(&icd->dev, "Setting gain %d\n", data);
-			data = reg_write(icd, MT9M001_GLOBAL_GAIN, data);
+			data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
 			if (data < 0)
 				return -EIO;
 		} else {
@@ -481,8 +485,8 @@ static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_contro
 				data = ((gain - 64) * 7 + 28) / 56 + 96;
 
 			dev_dbg(&icd->dev, "Setting gain from %d to %d\n",
-				 reg_read(icd, MT9M001_GLOBAL_GAIN), data);
-			data = reg_write(icd, MT9M001_GLOBAL_GAIN, data);
+				 reg_read(client, MT9M001_GLOBAL_GAIN), data);
+			data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
 			if (data < 0)
 				return -EIO;
 		}
@@ -500,8 +504,8 @@ static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_contro
 						 range / 2) / range + 1;
 
 			dev_dbg(&icd->dev, "Setting shutter width from %d to %lu\n",
-				 reg_read(icd, MT9M001_SHUTTER_WIDTH), shutter);
-			if (reg_write(icd, MT9M001_SHUTTER_WIDTH, shutter) < 0)
+				 reg_read(client, MT9M001_SHUTTER_WIDTH), shutter);
+			if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0)
 				return -EIO;
 			icd->exposure = ctrl->value;
 			mt9m001->autoexposure = 0;
@@ -510,7 +514,7 @@ static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_contro
 	case V4L2_CID_EXPOSURE_AUTO:
 		if (ctrl->value) {
 			const u16 vblank = 25;
-			if (reg_write(icd, MT9M001_SHUTTER_WIDTH, icd->height +
+			if (reg_write(client, MT9M001_SHUTTER_WIDTH, icd->height +
 				      icd->y_skip_top + vblank) < 0)
 				return -EIO;
 			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
@@ -529,8 +533,9 @@ static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_contro
  * this wasn't our capture interface, so, we wait for the right one */
 static int mt9m001_video_probe(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
+	struct soc_camera_link *icl = client->dev.platform_data;
 	s32 data;
 	int ret;
 	unsigned long flags;
@@ -542,11 +547,11 @@ static int mt9m001_video_probe(struct soc_camera_device *icd)
 		return -ENODEV;
 
 	/* Enable the chip */
-	data = reg_write(icd, MT9M001_CHIP_ENABLE, 1);
+	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
 	dev_dbg(&icd->dev, "write: %d\n", data);
 
 	/* Read out the chip version register */
-	data = reg_read(icd, MT9M001_CHIP_VERSION);
+	data = reg_read(client, MT9M001_CHIP_VERSION);
 
 	/* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
 	switch (data) {
@@ -604,10 +609,13 @@ ei2c:
 static void mt9m001_video_remove(struct soc_camera_device *icd)
 {
 	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
+	struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
 
 	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9m001->client->addr,
 		icd->dev.parent, icd->vdev);
 	soc_camera_video_stop(icd);
+	if (icl->free_bus)
+		icl->free_bus(icl);
 }
 
 static int mt9m001_probe(struct i2c_client *client,
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index cdd1ddb5138..fc5e2de0376 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -113,10 +113,10 @@
  * mt9m111: Camera control register addresses (0x200..0x2ff not implemented)
  */
 
-#define reg_read(reg) mt9m111_reg_read(icd, MT9M111_##reg)
-#define reg_write(reg, val) mt9m111_reg_write(icd, MT9M111_##reg, (val))
-#define reg_set(reg, val) mt9m111_reg_set(icd, MT9M111_##reg, (val))
-#define reg_clear(reg, val) mt9m111_reg_clear(icd, MT9M111_##reg, (val))
+#define reg_read(reg) mt9m111_reg_read(client, MT9M111_##reg)
+#define reg_write(reg, val) mt9m111_reg_write(client, MT9M111_##reg, (val))
+#define reg_set(reg, val) mt9m111_reg_set(client, MT9M111_##reg, (val))
+#define reg_clear(reg, val) mt9m111_reg_clear(client, MT9M111_##reg, (val))
 
 #define MT9M111_MIN_DARK_ROWS	8
 #define MT9M111_MIN_DARK_COLS	24
@@ -184,58 +184,55 @@ static int reg_page_map_set(struct i2c_client *client, const u16 reg)
 	return ret;
 }
 
-static int mt9m111_reg_read(struct soc_camera_device *icd, const u16 reg)
+static int mt9m111_reg_read(struct i2c_client *client, const u16 reg)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-	struct i2c_client *client = mt9m111->client;
 	int ret;
 
 	ret = reg_page_map_set(client, reg);
 	if (!ret)
 		ret = swab16(i2c_smbus_read_word_data(client, (reg & 0xff)));
 
-	dev_dbg(&icd->dev, "read  reg.%03x -> %04x\n", reg, ret);
+	dev_dbg(&client->dev, "read  reg.%03x -> %04x\n", reg, ret);
 	return ret;
 }
 
-static int mt9m111_reg_write(struct soc_camera_device *icd, const u16 reg,
+static int mt9m111_reg_write(struct i2c_client *client, const u16 reg,
 			     const u16 data)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-	struct i2c_client *client = mt9m111->client;
 	int ret;
 
 	ret = reg_page_map_set(client, reg);
 	if (!ret)
-		ret = i2c_smbus_write_word_data(mt9m111->client, (reg & 0xff),
+		ret = i2c_smbus_write_word_data(client, (reg & 0xff),
 						swab16(data));
-	dev_dbg(&icd->dev, "write reg.%03x = %04x -> %d\n", reg, data, ret);
+	dev_dbg(&client->dev, "write reg.%03x = %04x -> %d\n", reg, data, ret);
 	return ret;
 }
 
-static int mt9m111_reg_set(struct soc_camera_device *icd, const u16 reg,
+static int mt9m111_reg_set(struct i2c_client *client, const u16 reg,
 			   const u16 data)
 {
 	int ret;
 
-	ret = mt9m111_reg_read(icd, reg);
+	ret = mt9m111_reg_read(client, reg);
 	if (ret >= 0)
-		ret = mt9m111_reg_write(icd, reg, ret | data);
+		ret = mt9m111_reg_write(client, reg, ret | data);
 	return ret;
 }
 
-static int mt9m111_reg_clear(struct soc_camera_device *icd, const u16 reg,
+static int mt9m111_reg_clear(struct i2c_client *client, const u16 reg,
 			     const u16 data)
 {
 	int ret;
 
-	ret = mt9m111_reg_read(icd, reg);
-	return mt9m111_reg_write(icd, reg, ret & ~data);
+	ret = mt9m111_reg_read(client, reg);
+	return mt9m111_reg_write(client, reg, ret & ~data);
 }
 
 static int mt9m111_set_context(struct soc_camera_device *icd,
 			       enum mt9m111_context ctxt)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	int valB = MT9M111_CTXT_CTRL_RESTART | MT9M111_CTXT_CTRL_DEFECTCOR_B
 		| MT9M111_CTXT_CTRL_RESIZE_B | MT9M111_CTXT_CTRL_CTRL2_B
 		| MT9M111_CTXT_CTRL_GAMMA_B | MT9M111_CTXT_CTRL_READ_MODE_B
@@ -252,6 +249,7 @@ static int mt9m111_set_context(struct soc_camera_device *icd,
 static int mt9m111_setup_rect(struct soc_camera_device *icd,
 			      struct v4l2_rect *rect)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
 	int ret, is_raw_format;
 	int width = rect->width;
@@ -296,6 +294,7 @@ static int mt9m111_setup_rect(struct soc_camera_device *icd,
 
 static int mt9m111_setup_pixfmt(struct soc_camera_device *icd, u16 outfmt)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	int ret;
 
 	ret = reg_write(OUTPUT_FORMAT_CTRL2_A, outfmt);
@@ -357,12 +356,13 @@ static int mt9m111_setfmt_yuv(struct soc_camera_device *icd)
 
 static int mt9m111_enable(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-	struct soc_camera_link *icl = mt9m111->client->dev.platform_data;
+	struct soc_camera_link *icl = client->dev.platform_data;
 	int ret;
 
 	if (icl->power) {
-		ret = icl->power(&mt9m111->client->dev, 1);
+		ret = icl->power(&client->dev, 1);
 		if (ret < 0) {
 			dev_err(icd->vdev->parent,
 				"Platform failed to power-on the camera.\n");
@@ -378,8 +378,9 @@ static int mt9m111_enable(struct soc_camera_device *icd)
 
 static int mt9m111_disable(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-	struct soc_camera_link *icl = mt9m111->client->dev.platform_data;
+	struct soc_camera_link *icl = client->dev.platform_data;
 	int ret;
 
 	ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE);
@@ -387,15 +388,15 @@ static int mt9m111_disable(struct soc_camera_device *icd)
 		mt9m111->powered = 0;
 
 	if (icl->power)
-		icl->power(&mt9m111->client->dev, 0);
+		icl->power(&client->dev, 0);
 
 	return ret;
 }
 
 static int mt9m111_reset(struct soc_camera_device *icd)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-	struct soc_camera_link *icl = mt9m111->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(icd->control);
+	struct soc_camera_link *icl = client->dev.platform_data;
 	int ret;
 
 	ret = reg_set(RESET, MT9M111_RESET_RESET_MODE);
@@ -406,7 +407,7 @@ static int mt9m111_reset(struct soc_camera_device *icd)
 				| MT9M111_RESET_RESET_SOC);
 
 	if (icl->reset)
-		icl->reset(&mt9m111->client->dev);
+		icl->reset(&client->dev);
 
 	return ret;
 }
@@ -562,15 +563,14 @@ static int mt9m111_get_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
 	int val;
-
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff)
 		return -EINVAL;
-	if (reg->match.addr != mt9m111->client->addr)
+	if (reg->match.addr != client->addr)
 		return -ENODEV;
 
-	val = mt9m111_reg_read(icd, reg->reg);
+	val = mt9m111_reg_read(client, reg->reg);
 	reg->size = 2;
 	reg->val = (u64)val;
 
@@ -583,15 +583,15 @@ static int mt9m111_get_register(struct soc_camera_device *icd,
 static int mt9m111_set_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff)
 		return -EINVAL;
 
-	if (reg->match.addr != mt9m111->client->addr)
+	if (reg->match.addr != client->addr)
 		return -ENODEV;
 
-	if (mt9m111_reg_write(icd, reg->reg, reg->val) < 0)
+	if (mt9m111_reg_write(client, reg->reg, reg->val) < 0)
 		return -EIO;
 
 	return 0;
@@ -672,6 +672,7 @@ static struct soc_camera_ops mt9m111_ops = {
 
 static int mt9m111_set_flip(struct soc_camera_device *icd, int flip, int mask)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
 	int ret;
 
@@ -692,6 +693,7 @@ static int mt9m111_set_flip(struct soc_camera_device *icd, int flip, int mask)
 
 static int mt9m111_get_global_gain(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	int data;
 
 	data = reg_read(GLOBAL_GAIN);
@@ -703,6 +705,7 @@ static int mt9m111_get_global_gain(struct soc_camera_device *icd)
 
 static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	u16 val;
 
 	if (gain > 63 * 2 * 2)
@@ -721,6 +724,7 @@ static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain)
 
 static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
 	int ret;
 
@@ -737,6 +741,7 @@ static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on)
 
 static int mt9m111_set_autowhitebalance(struct soc_camera_device *icd, int on)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
 	int ret;
 
@@ -754,6 +759,7 @@ static int mt9m111_set_autowhitebalance(struct soc_camera_device *icd, int on)
 static int mt9m111_get_control(struct soc_camera_device *icd,
 			       struct v4l2_control *ctrl)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
 	int data;
 
@@ -898,6 +904,7 @@ static int mt9m111_release(struct soc_camera_device *icd)
  */
 static int mt9m111_video_probe(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
 	s32 data;
 	int ret;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 2b0927bfd21..f72aeb7c4de 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -76,64 +76,61 @@ struct mt9t031 {
 	u16 yskip;
 };
 
-static int reg_read(struct soc_camera_device *icd, const u8 reg)
+static int reg_read(struct i2c_client *client, const u8 reg)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
-	struct i2c_client *client = mt9t031->client;
 	s32 data = i2c_smbus_read_word_data(client, reg);
 	return data < 0 ? data : swab16(data);
 }
 
-static int reg_write(struct soc_camera_device *icd, const u8 reg,
+static int reg_write(struct i2c_client *client, const u8 reg,
 		     const u16 data)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
-	return i2c_smbus_write_word_data(mt9t031->client, reg, swab16(data));
+	return i2c_smbus_write_word_data(client, reg, swab16(data));
 }
 
-static int reg_set(struct soc_camera_device *icd, const u8 reg,
+static int reg_set(struct i2c_client *client, const u8 reg,
 		   const u16 data)
 {
 	int ret;
 
-	ret = reg_read(icd, reg);
+	ret = reg_read(client, reg);
 	if (ret < 0)
 		return ret;
-	return reg_write(icd, reg, ret | data);
+	return reg_write(client, reg, ret | data);
 }
 
-static int reg_clear(struct soc_camera_device *icd, const u8 reg,
+static int reg_clear(struct i2c_client *client, const u8 reg,
 		     const u16 data)
 {
 	int ret;
 
-	ret = reg_read(icd, reg);
+	ret = reg_read(client, reg);
 	if (ret < 0)
 		return ret;
-	return reg_write(icd, reg, ret & ~data);
+	return reg_write(client, reg, ret & ~data);
 }
 
-static int set_shutter(struct soc_camera_device *icd, const u32 data)
+static int set_shutter(struct i2c_client *client, const u32 data)
 {
 	int ret;
 
-	ret = reg_write(icd, MT9T031_SHUTTER_WIDTH_UPPER, data >> 16);
+	ret = reg_write(client, MT9T031_SHUTTER_WIDTH_UPPER, data >> 16);
 
 	if (ret >= 0)
-		ret = reg_write(icd, MT9T031_SHUTTER_WIDTH, data & 0xffff);
+		ret = reg_write(client, MT9T031_SHUTTER_WIDTH, data & 0xffff);
 
 	return ret;
 }
 
-static int get_shutter(struct soc_camera_device *icd, u32 *data)
+static int get_shutter(struct i2c_client *client, u32 *data)
 {
 	int ret;
 
-	ret = reg_read(icd, MT9T031_SHUTTER_WIDTH_UPPER);
+	ret = reg_read(client, MT9T031_SHUTTER_WIDTH_UPPER);
 	*data = ret << 16;
 
 	if (ret >= 0)
-		ret = reg_read(icd, MT9T031_SHUTTER_WIDTH);
+		ret = reg_read(client, MT9T031_SHUTTER_WIDTH);
 	*data |= ret & 0xffff;
 
 	return ret < 0 ? ret : 0;
@@ -141,12 +138,12 @@ static int get_shutter(struct soc_camera_device *icd, u32 *data)
 
 static int mt9t031_init(struct soc_camera_device *icd)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
-	struct soc_camera_link *icl = mt9t031->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(icd->control);
+	struct soc_camera_link *icl = client->dev.platform_data;
 	int ret;
 
 	if (icl->power) {
-		ret = icl->power(&mt9t031->client->dev, 1);
+		ret = icl->power(&client->dev, 1);
 		if (ret < 0) {
 			dev_err(icd->vdev->parent,
 				"Platform failed to power-on the camera.\n");
@@ -155,44 +152,48 @@ static int mt9t031_init(struct soc_camera_device *icd)
 	}
 
 	/* Disable chip output, synchronous option update */
-	ret = reg_write(icd, MT9T031_RESET, 1);
+	ret = reg_write(client, MT9T031_RESET, 1);
 	if (ret >= 0)
-		ret = reg_write(icd, MT9T031_RESET, 0);
+		ret = reg_write(client, MT9T031_RESET, 0);
 	if (ret >= 0)
-		ret = reg_clear(icd, MT9T031_OUTPUT_CONTROL, 2);
+		ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
 
 	if (ret < 0 && icl->power)
-		icl->power(&mt9t031->client->dev, 0);
+		icl->power(&client->dev, 0);
 
 	return ret >= 0 ? 0 : -EIO;
 }
 
 static int mt9t031_release(struct soc_camera_device *icd)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
-	struct soc_camera_link *icl = mt9t031->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(icd->control);
+	struct soc_camera_link *icl = client->dev.platform_data;
 
 	/* Disable the chip */
-	reg_clear(icd, MT9T031_OUTPUT_CONTROL, 2);
+	reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
 
 	if (icl->power)
-		icl->power(&mt9t031->client->dev, 0);
+		icl->power(&client->dev, 0);
 
 	return 0;
 }
 
 static int mt9t031_start_capture(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
+
 	/* Switch to master "normal" mode */
-	if (reg_set(icd, MT9T031_OUTPUT_CONTROL, 2) < 0)
+	if (reg_set(client, MT9T031_OUTPUT_CONTROL, 2) < 0)
 		return -EIO;
 	return 0;
 }
 
 static int mt9t031_stop_capture(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
+
 	/* Stop sensor readout */
-	if (reg_clear(icd, MT9T031_OUTPUT_CONTROL, 2) < 0)
+	if (reg_clear(client, MT9T031_OUTPUT_CONTROL, 2) < 0)
 		return -EIO;
 	return 0;
 }
@@ -200,14 +201,16 @@ static int mt9t031_stop_capture(struct soc_camera_device *icd)
 static int mt9t031_set_bus_param(struct soc_camera_device *icd,
 				 unsigned long flags)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
+
 	/* The caller should have queried our parameters, check anyway */
 	if (flags & ~MT9T031_BUS_PARAM)
 		return -EINVAL;
 
 	if (flags & SOCAM_PCLK_SAMPLE_FALLING)
-		reg_clear(icd, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
+		reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
 	else
-		reg_set(icd, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
+		reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
 
 	return 0;
 }
@@ -235,6 +238,7 @@ static void recalculate_limits(struct soc_camera_device *icd,
 static int mt9t031_set_params(struct soc_camera_device *icd,
 			      struct v4l2_rect *rect, u16 xskip, u16 yskip)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
 	int ret;
 	u16 xbin, ybin, width, height, left, top;
@@ -277,22 +281,22 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 	}
 
 	/* Disable register update, reconfigure atomically */
-	ret = reg_set(icd, MT9T031_OUTPUT_CONTROL, 1);
+	ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 1);
 	if (ret < 0)
 		return ret;
 
 	/* Blanking and start values - default... */
-	ret = reg_write(icd, MT9T031_HORIZONTAL_BLANKING, hblank);
+	ret = reg_write(client, MT9T031_HORIZONTAL_BLANKING, hblank);
 	if (ret >= 0)
-		ret = reg_write(icd, MT9T031_VERTICAL_BLANKING, vblank);
+		ret = reg_write(client, MT9T031_VERTICAL_BLANKING, vblank);
 
 	if (yskip != mt9t031->yskip || xskip != mt9t031->xskip) {
 		/* Binning, skipping */
 		if (ret >= 0)
-			ret = reg_write(icd, MT9T031_COLUMN_ADDRESS_MODE,
+			ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
 					((xbin - 1) << 4) | (xskip - 1));
 		if (ret >= 0)
-			ret = reg_write(icd, MT9T031_ROW_ADDRESS_MODE,
+			ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
 					((ybin - 1) << 4) | (yskip - 1));
 	}
 	dev_dbg(&icd->dev, "new physical left %u, top %u\n", left, top);
@@ -300,16 +304,16 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 	/* The caller provides a supported format, as guaranteed by
 	 * icd->try_fmt_cap(), soc_camera_s_crop() and soc_camera_cropcap() */
 	if (ret >= 0)
-		ret = reg_write(icd, MT9T031_COLUMN_START, left);
+		ret = reg_write(client, MT9T031_COLUMN_START, left);
 	if (ret >= 0)
-		ret = reg_write(icd, MT9T031_ROW_START, top);
+		ret = reg_write(client, MT9T031_ROW_START, top);
 	if (ret >= 0)
-		ret = reg_write(icd, MT9T031_WINDOW_WIDTH, width - 1);
+		ret = reg_write(client, MT9T031_WINDOW_WIDTH, width - 1);
 	if (ret >= 0)
-		ret = reg_write(icd, MT9T031_WINDOW_HEIGHT,
+		ret = reg_write(client, MT9T031_WINDOW_HEIGHT,
 				height + icd->y_skip_top - 1);
 	if (ret >= 0 && mt9t031->autoexposure) {
-		ret = set_shutter(icd, height + icd->y_skip_top + vblank);
+		ret = set_shutter(client, height + icd->y_skip_top + vblank);
 		if (ret >= 0) {
 			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
 			const struct v4l2_queryctrl *qctrl =
@@ -324,7 +328,7 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 
 	/* Re-enable register update, commit all changes */
 	if (ret >= 0)
-		ret = reg_clear(icd, MT9T031_OUTPUT_CONTROL, 1);
+		ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 1);
 
 	return ret < 0 ? ret : 0;
 }
@@ -417,15 +421,15 @@ static int mt9t031_get_chip_id(struct soc_camera_device *icd,
 static int mt9t031_get_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
 
-	if (reg->match.addr != mt9t031->client->addr)
+	if (reg->match.addr != client->addr)
 		return -ENODEV;
 
-	reg->val = reg_read(icd, reg->reg);
+	reg->val = reg_read(client, reg->reg);
 
 	if (reg->val > 0xffff)
 		return -EIO;
@@ -436,15 +440,15 @@ static int mt9t031_get_register(struct soc_camera_device *icd,
 static int mt9t031_set_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
 
-	if (reg->match.addr != mt9t031->client->addr)
+	if (reg->match.addr != client->addr)
 		return -ENODEV;
 
-	if (reg_write(icd, reg->reg, reg->val) < 0)
+	if (reg_write(client, reg->reg, reg->val) < 0)
 		return -EIO;
 
 	return 0;
@@ -528,18 +532,19 @@ static struct soc_camera_ops mt9t031_ops = {
 
 static int mt9t031_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
 	int data;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		data = reg_read(icd, MT9T031_READ_MODE_2);
+		data = reg_read(client, MT9T031_READ_MODE_2);
 		if (data < 0)
 			return -EIO;
 		ctrl->value = !!(data & 0x8000);
 		break;
 	case V4L2_CID_HFLIP:
-		data = reg_read(icd, MT9T031_READ_MODE_2);
+		data = reg_read(client, MT9T031_READ_MODE_2);
 		if (data < 0)
 			return -EIO;
 		ctrl->value = !!(data & 0x4000);
@@ -553,6 +558,7 @@ static int mt9t031_get_control(struct soc_camera_device *icd, struct v4l2_contro
 
 static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
 	const struct v4l2_queryctrl *qctrl;
 	int data;
@@ -565,17 +571,17 @@ static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_contro
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
 		if (ctrl->value)
-			data = reg_set(icd, MT9T031_READ_MODE_2, 0x8000);
+			data = reg_set(client, MT9T031_READ_MODE_2, 0x8000);
 		else
-			data = reg_clear(icd, MT9T031_READ_MODE_2, 0x8000);
+			data = reg_clear(client, MT9T031_READ_MODE_2, 0x8000);
 		if (data < 0)
 			return -EIO;
 		break;
 	case V4L2_CID_HFLIP:
 		if (ctrl->value)
-			data = reg_set(icd, MT9T031_READ_MODE_2, 0x4000);
+			data = reg_set(client, MT9T031_READ_MODE_2, 0x4000);
 		else
-			data = reg_clear(icd, MT9T031_READ_MODE_2, 0x4000);
+			data = reg_clear(client, MT9T031_READ_MODE_2, 0x4000);
 		if (data < 0)
 			return -EIO;
 		break;
@@ -589,7 +595,7 @@ static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_contro
 			data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
 
 			dev_dbg(&icd->dev, "Setting gain %d\n", data);
-			data = reg_write(icd, MT9T031_GLOBAL_GAIN, data);
+			data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
 			if (data < 0)
 				return -EIO;
 		} else {
@@ -609,8 +615,8 @@ static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_contro
 				data = (((gain - 64 + 7) * 32) & 0xff00) | 0x60;
 
 			dev_dbg(&icd->dev, "Setting gain from 0x%x to 0x%x\n",
-				reg_read(icd, MT9T031_GLOBAL_GAIN), data);
-			data = reg_write(icd, MT9T031_GLOBAL_GAIN, data);
+				reg_read(client, MT9T031_GLOBAL_GAIN), data);
+			data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
 			if (data < 0)
 				return -EIO;
 		}
@@ -628,10 +634,10 @@ static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_contro
 					     range / 2) / range + 1;
 			u32 old;
 
-			get_shutter(icd, &old);
+			get_shutter(client, &old);
 			dev_dbg(&icd->dev, "Setting shutter width from %u to %u\n",
 				old, shutter);
-			if (set_shutter(icd, shutter) < 0)
+			if (set_shutter(client, shutter) < 0)
 				return -EIO;
 			icd->exposure = ctrl->value;
 			mt9t031->autoexposure = 0;
@@ -641,7 +647,7 @@ static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_contro
 		if (ctrl->value) {
 			const u16 vblank = MT9T031_VERTICAL_BLANK;
 			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
-			if (set_shutter(icd, icd->height +
+			if (set_shutter(client, icd->height +
 					icd->y_skip_top + vblank) < 0)
 				return -EIO;
 			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
@@ -661,6 +667,7 @@ static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_contro
  * this wasn't our capture interface, so, we wait for the right one */
 static int mt9t031_video_probe(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
 	s32 data;
 	int ret;
@@ -672,11 +679,11 @@ static int mt9t031_video_probe(struct soc_camera_device *icd)
 		return -ENODEV;
 
 	/* Enable the chip */
-	data = reg_write(icd, MT9T031_CHIP_ENABLE, 1);
+	data = reg_write(client, MT9T031_CHIP_ENABLE, 1);
 	dev_dbg(&icd->dev, "write: %d\n", data);
 
 	/* Read out the chip version register */
-	data = reg_read(icd, MT9T031_CHIP_VERSION);
+	data = reg_read(client, MT9T031_CHIP_VERSION);
 
 	switch (data) {
 	case 0x1621:
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 4d3b4813c32..be20d312b1d 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -91,51 +91,49 @@ struct mt9v022 {
 	u16 chip_control;
 };
 
-static int reg_read(struct soc_camera_device *icd, const u8 reg)
+static int reg_read(struct i2c_client *client, const u8 reg)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct i2c_client *client = mt9v022->client;
 	s32 data = i2c_smbus_read_word_data(client, reg);
 	return data < 0 ? data : swab16(data);
 }
 
-static int reg_write(struct soc_camera_device *icd, const u8 reg,
+static int reg_write(struct i2c_client *client, const u8 reg,
 		     const u16 data)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	return i2c_smbus_write_word_data(mt9v022->client, reg, swab16(data));
+	return i2c_smbus_write_word_data(client, reg, swab16(data));
 }
 
-static int reg_set(struct soc_camera_device *icd, const u8 reg,
+static int reg_set(struct i2c_client *client, const u8 reg,
 		   const u16 data)
 {
 	int ret;
 
-	ret = reg_read(icd, reg);
+	ret = reg_read(client, reg);
 	if (ret < 0)
 		return ret;
-	return reg_write(icd, reg, ret | data);
+	return reg_write(client, reg, ret | data);
 }
 
-static int reg_clear(struct soc_camera_device *icd, const u8 reg,
+static int reg_clear(struct i2c_client *client, const u8 reg,
 		     const u16 data)
 {
 	int ret;
 
-	ret = reg_read(icd, reg);
+	ret = reg_read(client, reg);
 	if (ret < 0)
 		return ret;
-	return reg_write(icd, reg, ret & ~data);
+	return reg_write(client, reg, ret & ~data);
 }
 
 static int mt9v022_init(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
+	struct soc_camera_link *icl = client->dev.platform_data;
 	int ret;
 
 	if (icl->power) {
-		ret = icl->power(&mt9v022->client->dev, 1);
+		ret = icl->power(&client->dev, 1);
 		if (ret < 0) {
 			dev_err(icd->vdev->parent,
 				"Platform failed to power-on the camera.\n");
@@ -148,27 +146,27 @@ static int mt9v022_init(struct soc_camera_device *icd)
 	 * if available. Soft reset is done in video_probe().
 	 */
 	if (icl->reset)
-		icl->reset(&mt9v022->client->dev);
+		icl->reset(&client->dev);
 
 	/* Almost the default mode: master, parallel, simultaneous, and an
 	 * undocumented bit 0x200, which is present in table 7, but not in 8,
 	 * plus snapshot mode to disable scan for now */
 	mt9v022->chip_control |= 0x10;
-	ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
+	ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
 	if (!ret)
-		ret = reg_write(icd, MT9V022_READ_MODE, 0x300);
+		ret = reg_write(client, MT9V022_READ_MODE, 0x300);
 
 	/* All defaults */
 	if (!ret)
 		/* AEC, AGC on */
-		ret = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x3);
+		ret = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x3);
 	if (!ret)
-		ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480);
+		ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480);
 	if (!ret)
 		/* default - auto */
-		ret = reg_clear(icd, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
+		ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
 	if (!ret)
-		ret = reg_write(icd, MT9V022_DIGITAL_TEST_PATTERN, 0);
+		ret = reg_write(client, MT9V022_DIGITAL_TEST_PATTERN, 0);
 
 	return ret;
 }
@@ -186,10 +184,11 @@ static int mt9v022_release(struct soc_camera_device *icd)
 
 static int mt9v022_start_capture(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
 	/* Switch to master "normal" mode */
 	mt9v022->chip_control &= ~0x10;
-	if (reg_write(icd, MT9V022_CHIP_CONTROL,
+	if (reg_write(client, MT9V022_CHIP_CONTROL,
 		      mt9v022->chip_control) < 0)
 		return -EIO;
 	return 0;
@@ -197,10 +196,11 @@ static int mt9v022_start_capture(struct soc_camera_device *icd)
 
 static int mt9v022_stop_capture(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
 	/* Switch to snapshot mode */
 	mt9v022->chip_control |= 0x10;
-	if (reg_write(icd, MT9V022_CHIP_CONTROL,
+	if (reg_write(client, MT9V022_CHIP_CONTROL,
 		      mt9v022->chip_control) < 0)
 		return -EIO;
 	return 0;
@@ -209,8 +209,9 @@ static int mt9v022_stop_capture(struct soc_camera_device *icd)
 static int mt9v022_set_bus_param(struct soc_camera_device *icd,
 				 unsigned long flags)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
+	struct soc_camera_link *icl = client->dev.platform_data;
 	unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK;
 	int ret;
 	u16 pixclk = 0;
@@ -243,14 +244,14 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd,
 	if (!(flags & SOCAM_VSYNC_ACTIVE_HIGH))
 		pixclk |= 0x2;
 
-	ret = reg_write(icd, MT9V022_PIXCLK_FV_LV, pixclk);
+	ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
 	if (ret < 0)
 		return ret;
 
 	if (!(flags & SOCAM_MASTER))
 		mt9v022->chip_control &= ~0x8;
 
-	ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
+	ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
 	if (ret < 0)
 		return ret;
 
@@ -282,35 +283,36 @@ static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
 static int mt9v022_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	int ret;
 
 	/* Like in example app. Contradicts the datasheet though */
-	ret = reg_read(icd, MT9V022_AEC_AGC_ENABLE);
+	ret = reg_read(client, MT9V022_AEC_AGC_ENABLE);
 	if (ret >= 0) {
 		if (ret & 1) /* Autoexposure */
-			ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
+			ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
 					rect->height + icd->y_skip_top + 43);
 		else
-			ret = reg_write(icd, MT9V022_TOTAL_SHUTTER_WIDTH,
+			ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
 					rect->height + icd->y_skip_top + 43);
 	}
 	/* Setup frame format: defaults apart from width and height */
 	if (!ret)
-		ret = reg_write(icd, MT9V022_COLUMN_START, rect->left);
+		ret = reg_write(client, MT9V022_COLUMN_START, rect->left);
 	if (!ret)
-		ret = reg_write(icd, MT9V022_ROW_START, rect->top);
+		ret = reg_write(client, MT9V022_ROW_START, rect->top);
 	if (!ret)
 		/* Default 94, Phytec driver says:
 		 * "width + horizontal blank >= 660" */
-		ret = reg_write(icd, MT9V022_HORIZONTAL_BLANKING,
+		ret = reg_write(client, MT9V022_HORIZONTAL_BLANKING,
 				rect->width > 660 - 43 ? 43 :
 				660 - rect->width);
 	if (!ret)
-		ret = reg_write(icd, MT9V022_VERTICAL_BLANKING, 45);
+		ret = reg_write(client, MT9V022_VERTICAL_BLANKING, 45);
 	if (!ret)
-		ret = reg_write(icd, MT9V022_WINDOW_WIDTH, rect->width);
+		ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect->width);
 	if (!ret)
-		ret = reg_write(icd, MT9V022_WINDOW_HEIGHT,
+		ret = reg_write(client, MT9V022_WINDOW_HEIGHT,
 				rect->height + icd->y_skip_top);
 
 	if (ret < 0)
@@ -396,16 +398,16 @@ static int mt9v022_get_chip_id(struct soc_camera_device *icd,
 static int mt9v022_get_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
+	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
 
-	if (reg->match.addr != mt9v022->client->addr)
+	if (reg->match.addr != client->addr)
 		return -ENODEV;
 
 	reg->size = 2;
-	reg->val = reg_read(icd, reg->reg);
+	reg->val = reg_read(client, reg->reg);
 
 	if (reg->val > 0xffff)
 		return -EIO;
@@ -416,15 +418,15 @@ static int mt9v022_get_register(struct soc_camera_device *icd,
 static int mt9v022_set_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
+	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
 
-	if (reg->match.addr != mt9v022->client->addr)
+	if (reg->match.addr != client->addr)
 		return -ENODEV;
 
-	if (reg_write(icd, reg->reg, reg->val) < 0)
+	if (reg_write(client, reg->reg, reg->val) < 0)
 		return -EIO;
 
 	return 0;
@@ -517,29 +519,30 @@ static struct soc_camera_ops mt9v022_ops = {
 static int mt9v022_get_control(struct soc_camera_device *icd,
 			       struct v4l2_control *ctrl)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	int data;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		data = reg_read(icd, MT9V022_READ_MODE);
+		data = reg_read(client, MT9V022_READ_MODE);
 		if (data < 0)
 			return -EIO;
 		ctrl->value = !!(data & 0x10);
 		break;
 	case V4L2_CID_HFLIP:
-		data = reg_read(icd, MT9V022_READ_MODE);
+		data = reg_read(client, MT9V022_READ_MODE);
 		if (data < 0)
 			return -EIO;
 		ctrl->value = !!(data & 0x20);
 		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		data = reg_read(icd, MT9V022_AEC_AGC_ENABLE);
+		data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
 		if (data < 0)
 			return -EIO;
 		ctrl->value = !!(data & 0x1);
 		break;
 	case V4L2_CID_AUTOGAIN:
-		data = reg_read(icd, MT9V022_AEC_AGC_ENABLE);
+		data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
 		if (data < 0)
 			return -EIO;
 		ctrl->value = !!(data & 0x2);
@@ -552,6 +555,7 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
 			       struct v4l2_control *ctrl)
 {
 	int data;
+	struct i2c_client *client = to_i2c_client(icd->control);
 	const struct v4l2_queryctrl *qctrl;
 
 	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
@@ -562,17 +566,17 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
 		if (ctrl->value)
-			data = reg_set(icd, MT9V022_READ_MODE, 0x10);
+			data = reg_set(client, MT9V022_READ_MODE, 0x10);
 		else
-			data = reg_clear(icd, MT9V022_READ_MODE, 0x10);
+			data = reg_clear(client, MT9V022_READ_MODE, 0x10);
 		if (data < 0)
 			return -EIO;
 		break;
 	case V4L2_CID_HFLIP:
 		if (ctrl->value)
-			data = reg_set(icd, MT9V022_READ_MODE, 0x20);
+			data = reg_set(client, MT9V022_READ_MODE, 0x20);
 		else
-			data = reg_clear(icd, MT9V022_READ_MODE, 0x20);
+			data = reg_clear(client, MT9V022_READ_MODE, 0x20);
 		if (data < 0)
 			return -EIO;
 		break;
@@ -593,12 +597,12 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
 			/* The user wants to set gain manually, hope, she
 			 * knows, what she's doing... Switch AGC off. */
 
-			if (reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
+			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
 				return -EIO;
 
 			dev_info(&icd->dev, "Setting gain from %d to %lu\n",
-				 reg_read(icd, MT9V022_ANALOG_GAIN), gain);
-			if (reg_write(icd, MT9V022_ANALOG_GAIN, gain) < 0)
+				 reg_read(client, MT9V022_ANALOG_GAIN), gain);
+			if (reg_write(client, MT9V022_ANALOG_GAIN, gain) < 0)
 				return -EIO;
 			icd->gain = ctrl->value;
 		}
@@ -614,13 +618,13 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
 			/* The user wants to set shutter width manually, hope,
 			 * she knows, what she's doing... Switch AEC off. */
 
-			if (reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x1) < 0)
+			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1) < 0)
 				return -EIO;
 
 			dev_dbg(&icd->dev, "Shutter width from %d to %lu\n",
-				reg_read(icd, MT9V022_TOTAL_SHUTTER_WIDTH),
+				reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
 				shutter);
-			if (reg_write(icd, MT9V022_TOTAL_SHUTTER_WIDTH,
+			if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
 				      shutter) < 0)
 				return -EIO;
 			icd->exposure = ctrl->value;
@@ -628,17 +632,17 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
 		break;
 	case V4L2_CID_AUTOGAIN:
 		if (ctrl->value)
-			data = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x2);
+			data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2);
 		else
-			data = reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x2);
+			data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2);
 		if (data < 0)
 			return -EIO;
 		break;
 	case V4L2_CID_EXPOSURE_AUTO:
 		if (ctrl->value)
-			data = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x1);
+			data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
 		else
-			data = reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x1);
+			data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
 		if (data < 0)
 			return -EIO;
 		break;
@@ -650,8 +654,9 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
  * this wasn't our capture interface, so, we wait for the right one */
 static int mt9v022_video_probe(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(icd->control);
 	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
+	struct soc_camera_link *icl = client->dev.platform_data;
 	s32 data;
 	int ret;
 	unsigned long flags;
@@ -661,7 +666,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
 		return -ENODEV;
 
 	/* Read out the chip version register */
-	data = reg_read(icd, MT9V022_CHIP_VERSION);
+	data = reg_read(client, MT9V022_CHIP_VERSION);
 
 	/* must be 0x1311 or 0x1313 */
 	if (data != 0x1311 && data != 0x1313) {
@@ -672,12 +677,12 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
 	}
 
 	/* Soft reset */
-	ret = reg_write(icd, MT9V022_RESET, 1);
+	ret = reg_write(client, MT9V022_RESET, 1);
 	if (ret < 0)
 		goto ei2c;
 	/* 15 clock cycles */
 	udelay(200);
-	if (reg_read(icd, MT9V022_RESET)) {
+	if (reg_read(client, MT9V022_RESET)) {
 		dev_err(&icd->dev, "Resetting MT9V022 failed!\n");
 		goto ei2c;
 	}
@@ -685,11 +690,11 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
 	/* Set monochrome or colour sensor type */
 	if (sensor_type && (!strcmp("colour", sensor_type) ||
 			    !strcmp("color", sensor_type))) {
-		ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11);
+		ret = reg_write(client, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11);
 		mt9v022->model = V4L2_IDENT_MT9V022IX7ATC;
 		icd->formats = mt9v022_colour_formats;
 	} else {
-		ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 0x11);
+		ret = reg_write(client, MT9V022_PIXEL_OPERATION_MODE, 0x11);
 		mt9v022->model = V4L2_IDENT_MT9V022IX7ATM;
 		icd->formats = mt9v022_monochrome_formats;
 	}
@@ -735,10 +740,13 @@ ei2c:
 static void mt9v022_video_remove(struct soc_camera_device *icd)
 {
 	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
+	struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
 
 	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9v022->client->addr,
 		icd->dev.parent, icd->vdev);
 	soc_camera_video_stop(icd);
+	if (icl->free_bus)
+		icl->free_bus(icl);
 }
 
 static int mt9v022_probe(struct i2c_client *client,
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 86fab56c5a2..2d075205bdf 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -102,10 +102,10 @@ struct mx1_buffer {
  * Interface. If anyone ever builds hardware to enable more than
  * one camera, they will have to modify this driver too */
 struct mx1_camera_dev {
+	struct soc_camera_host		soc_host;
 	struct soc_camera_device	*icd;
 	struct mx1_camera_pdata		*pdata;
 	struct mx1_buffer		*active;
-	struct device			*dev;
 	struct resource			*res;
 	struct clk			*clk;
 	struct list_head		capture;
@@ -219,7 +219,7 @@ static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 	int ret;
 
 	if (unlikely(!pcdev->active)) {
-		dev_err(pcdev->dev, "DMA End IRQ with no active buffer\n");
+		dev_err(pcdev->soc_host.dev, "DMA End IRQ with no active buffer\n");
 		return -EFAULT;
 	}
 
@@ -229,7 +229,7 @@ static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 		vbuf->size, pcdev->res->start +
 		CSIRXR, DMA_MODE_READ);
 	if (unlikely(ret))
-		dev_err(pcdev->dev, "Failed to setup DMA sg list\n");
+		dev_err(pcdev->soc_host.dev, "Failed to setup DMA sg list\n");
 
 	return ret;
 }
@@ -338,14 +338,14 @@ static void mx1_camera_dma_irq(int channel, void *data)
 	imx_dma_disable(channel);
 
 	if (unlikely(!pcdev->active)) {
-		dev_err(pcdev->dev, "DMA End IRQ with no active buffer\n");
+		dev_err(pcdev->soc_host.dev, "DMA End IRQ with no active buffer\n");
 		goto out;
 	}
 
 	vb = &pcdev->active->vb;
 	buf = container_of(vb, struct mx1_buffer, vb);
 	WARN_ON(buf->inwork || list_empty(&vb->queue));
-	dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(pcdev->soc_host.dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	mx1_camera_wakeup(pcdev, vb, buf);
@@ -366,7 +366,7 @@ static void mx1_camera_init_videobuf(struct videobuf_queue *q,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 
-	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, pcdev->dev,
+	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, ici->dev,
 					&pcdev->lock,
 					V4L2_BUF_TYPE_VIDEO_CAPTURE,
 					V4L2_FIELD_NONE,
@@ -385,7 +385,7 @@ static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
 	 * they get a nice Oops */
 	div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
 
-	dev_dbg(pcdev->dev, "System clock %lukHz, target freq %dkHz, "
+	dev_dbg(pcdev->soc_host.dev, "System clock %lukHz, target freq %dkHz, "
 		"divisor %lu\n", lcdclk / 1000, mclk / 1000, div);
 
 	return div;
@@ -395,7 +395,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 {
 	unsigned int csicr1 = CSICR1_EN;
 
-	dev_dbg(pcdev->dev, "Activate device\n");
+	dev_dbg(pcdev->soc_host.dev, "Activate device\n");
 
 	clk_enable(pcdev->clk);
 
@@ -411,7 +411,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 
 static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
 {
-	dev_dbg(pcdev->dev, "Deactivate device\n");
+	dev_dbg(pcdev->soc_host.dev, "Deactivate device\n");
 
 	/* Disable all CSI interface */
 	__raw_writel(0x00, pcdev->base + CSICR1);
@@ -550,7 +550,7 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pix->pixelformat);
+		dev_warn(ici->dev, "Format %x not found\n", pix->pixelformat);
 		return -EINVAL;
 	}
 
@@ -633,12 +633,6 @@ static struct soc_camera_host_ops mx1_soc_camera_host_ops = {
 	.querycap	= mx1_camera_querycap,
 };
 
-/* Should be allocated dynamically too, but we have only one. */
-static struct soc_camera_host mx1_soc_camera_host = {
-	.drv_name	= DRIVER_NAME,
-	.ops		= &mx1_soc_camera_host_ops,
-};
-
 static struct fiq_handler fh = {
 	.name		= "csi_sof"
 };
@@ -673,7 +667,6 @@ static int __init mx1_camera_probe(struct platform_device *pdev)
 		goto exit_put_clk;
 	}
 
-	dev_set_drvdata(&pdev->dev, pcdev);
 	pcdev->res = res;
 	pcdev->clk = clk;
 
@@ -707,16 +700,15 @@ static int __init mx1_camera_probe(struct platform_device *pdev)
 	}
 	pcdev->irq = irq;
 	pcdev->base = base;
-	pcdev->dev = &pdev->dev;
 
 	/* request dma */
 	pcdev->dma_chan = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_HIGH);
 	if (pcdev->dma_chan < 0) {
-		dev_err(pcdev->dev, "Can't request DMA for MX1 CSI\n");
+		dev_err(&pdev->dev, "Can't request DMA for MX1 CSI\n");
 		err = -EBUSY;
 		goto exit_iounmap;
 	}
-	dev_dbg(pcdev->dev, "got DMA channel %d\n", pcdev->dma_chan);
+	dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_chan);
 
 	imx_dma_setup_handlers(pcdev->dma_chan, mx1_camera_dma_irq, NULL,
 			       pcdev);
@@ -729,7 +721,7 @@ static int __init mx1_camera_probe(struct platform_device *pdev)
 	/* request irq */
 	err = claim_fiq(&fh);
 	if (err) {
-		dev_err(pcdev->dev, "Camera interrupt register failed \n");
+		dev_err(&pdev->dev, "Camera interrupt register failed \n");
 		goto exit_free_dma;
 	}
 
@@ -746,10 +738,12 @@ static int __init mx1_camera_probe(struct platform_device *pdev)
 	mxc_set_irq_fiq(irq, 1);
 	enable_fiq(irq);
 
-	mx1_soc_camera_host.priv	= pcdev;
-	mx1_soc_camera_host.dev.parent	= &pdev->dev;
-	mx1_soc_camera_host.nr		= pdev->id;
-	err = soc_camera_host_register(&mx1_soc_camera_host);
+	pcdev->soc_host.drv_name	= DRIVER_NAME;
+	pcdev->soc_host.ops		= &mx1_soc_camera_host_ops;
+	pcdev->soc_host.priv		= pcdev;
+	pcdev->soc_host.dev		= &pdev->dev;
+	pcdev->soc_host.nr		= pdev->id;
+	err = soc_camera_host_register(&pcdev->soc_host);
 	if (err)
 		goto exit_free_irq;
 
@@ -777,7 +771,9 @@ exit:
 
 static int __exit mx1_camera_remove(struct platform_device *pdev)
 {
-	struct mx1_camera_dev *pcdev = platform_get_drvdata(pdev);
+	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+	struct mx1_camera_dev *pcdev = container_of(soc_host,
+					struct mx1_camera_dev, soc_host);
 	struct resource *res;
 
 	imx_dma_free(pcdev->dma_chan);
@@ -787,7 +783,7 @@ static int __exit mx1_camera_remove(struct platform_device *pdev)
 
 	clk_put(pcdev->clk);
 
-	soc_camera_host_unregister(&mx1_soc_camera_host);
+	soc_camera_host_unregister(soc_host);
 
 	iounmap(pcdev->base);
 
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 2d0781118eb..e605c076ed8 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -87,7 +87,6 @@ struct mx3_camera_buffer {
  * @soc_host:		embedded soc_host object
  */
 struct mx3_camera_dev {
-	struct device		*dev;
 	/*
 	 * i.MX3x is only supposed to handle one camera on its Camera Sensor
 	 * Interface. If anyone ever builds hardware to enable more than one
@@ -431,7 +430,7 @@ static void mx3_camera_init_videobuf(struct videobuf_queue *q,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 
-	videobuf_queue_dma_contig_init(q, &mx3_videobuf_ops, mx3_cam->dev,
+	videobuf_queue_dma_contig_init(q, &mx3_videobuf_ops, ici->dev,
 				       &mx3_cam->lock,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       V4L2_FIELD_NONE,
@@ -599,7 +598,8 @@ static int test_platform_param(struct mx3_camera_dev *mx3_cam,
 		*flags |= SOCAM_DATAWIDTH_4;
 		break;
 	default:
-		dev_info(mx3_cam->dev, "Unsupported bus width %d\n", buswidth);
+		dev_info(mx3_cam->soc_host.dev, "Unsupported bus width %d\n",
+			 buswidth);
 		return -EINVAL;
 	}
 
@@ -614,7 +614,7 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 	unsigned long bus_flags, camera_flags;
 	int ret = test_platform_param(mx3_cam, depth, &bus_flags);
 
-	dev_dbg(&ici->dev, "requested bus width %d bit: %d\n", depth, ret);
+	dev_dbg(ici->dev, "requested bus width %d bit: %d\n", depth, ret);
 
 	if (ret < 0)
 		return ret;
@@ -637,7 +637,7 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
 	if (!rq)
 		return false;
 
-	pdata = rq->mx3_cam->dev->platform_data;
+	pdata = rq->mx3_cam->soc_host.dev->platform_data;
 
 	return rq->id == chan->chan_id &&
 		pdata->dma_dev == chan->device->dev;
@@ -697,7 +697,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(&ici->dev, "Providing format %s using %s\n",
+			dev_dbg(ici->dev, "Providing format %s using %s\n",
 				mx3_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -709,7 +709,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(&ici->dev, "Providing format %s using %s\n",
+			dev_dbg(ici->dev, "Providing format %s using %s\n",
 				mx3_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -722,7 +722,7 @@ passthrough:
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(&ici->dev,
+			dev_dbg(ici->dev,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -829,7 +829,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pix->pixelformat);
+		dev_warn(ici->dev, "Format %x not found\n", pix->pixelformat);
 		return -EINVAL;
 	}
 
@@ -866,7 +866,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (pixfmt && !xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -933,11 +933,11 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
-	dev_dbg(&ici->dev, "requested bus width %d bit: %d\n",
+	dev_dbg(ici->dev, "requested bus width %d bit: %d\n",
 		icd->buswidth, ret);
 
 	if (ret < 0)
@@ -947,7 +947,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 
 	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
 	if (!common_flags) {
-		dev_dbg(&ici->dev, "no common flags: camera %lx, host %lx\n",
+		dev_dbg(ici->dev, "no common flags: camera %lx, host %lx\n",
 			camera_flags, bus_flags);
 		return -EINVAL;
 	}
@@ -1054,7 +1054,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 
 	csi_reg_write(mx3_cam, sens_conf | dw, CSI_SENS_CONF);
 
-	dev_dbg(&ici->dev, "Set SENS_CONF to %x\n", sens_conf | dw);
+	dev_dbg(ici->dev, "Set SENS_CONF to %x\n", sens_conf | dw);
 
 	return 0;
 }
@@ -1074,7 +1074,7 @@ static struct soc_camera_host_ops mx3_soc_camera_host_ops = {
 	.set_bus_param	= mx3_camera_set_bus_param,
 };
 
-static int mx3_camera_probe(struct platform_device *pdev)
+static int __devinit mx3_camera_probe(struct platform_device *pdev)
 {
 	struct mx3_camera_dev *mx3_cam;
 	struct resource *res;
@@ -1102,8 +1102,6 @@ static int mx3_camera_probe(struct platform_device *pdev)
 		goto eclkget;
 	}
 
-	dev_set_drvdata(&pdev->dev, mx3_cam);
-
 	mx3_cam->pdata = pdev->dev.platform_data;
 	mx3_cam->platform_flags = mx3_cam->pdata->flags;
 	if (!(mx3_cam->platform_flags & (MX3_CAMERA_DATAWIDTH_4 |
@@ -1135,14 +1133,14 @@ static int mx3_camera_probe(struct platform_device *pdev)
 	}
 
 	mx3_cam->base	= base;
-	mx3_cam->dev	= &pdev->dev;
 
 	soc_host		= &mx3_cam->soc_host;
 	soc_host->drv_name	= MX3_CAM_DRV_NAME;
 	soc_host->ops		= &mx3_soc_camera_host_ops;
 	soc_host->priv		= mx3_cam;
-	soc_host->dev.parent	= &pdev->dev;
+	soc_host->dev		= &pdev->dev;
 	soc_host->nr		= pdev->id;
+
 	err = soc_camera_host_register(soc_host);
 	if (err)
 		goto ecamhostreg;
@@ -1165,11 +1163,13 @@ egetres:
 
 static int __devexit mx3_camera_remove(struct platform_device *pdev)
 {
-	struct mx3_camera_dev *mx3_cam = platform_get_drvdata(pdev);
+	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+	struct mx3_camera_dev *mx3_cam = container_of(soc_host,
+					struct mx3_camera_dev, soc_host);
 
 	clk_put(mx3_cam->clk);
 
-	soc_camera_host_unregister(&mx3_cam->soc_host);
+	soc_camera_host_unregister(soc_host);
 
 	iounmap(mx3_cam->base);
 
@@ -1194,11 +1194,11 @@ static struct platform_driver mx3_camera_driver = {
 		.name	= MX3_CAM_DRV_NAME,
 	},
 	.probe		= mx3_camera_probe,
-	.remove		= __exit_p(mx3_camera_remove),
+	.remove		= __devexit_p(mx3_camera_remove),
 };
 
 
-static int __devinit mx3_camera_init(void)
+static int __init mx3_camera_init(void)
 {
 	return platform_driver_register(&mx3_camera_driver);
 }
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 3be5a71bdac..35890e8b243 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -453,7 +453,7 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *vc)
 static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
 {
 	DEB_EE(("VIDIOC_ENUMINPUT %d.\n", i->index));
-	if (i->index < 0 || i->index >= MXB_INPUTS)
+	if (i->index >= MXB_INPUTS)
 		return -EINVAL;
 	memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
 	return 0;
@@ -616,7 +616,7 @@ static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a)
 	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
 	struct mxb *mxb = (struct mxb *)dev->ext_priv;
 
-	if (a->index < 0 || a->index > MXB_INPUTS) {
+	if (a->index > MXB_INPUTS) {
 		DEB_D(("VIDIOC_G_AUDIO %d out of range.\n", a->index));
 		return -EINVAL;
 	}
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 9af5532db14..08cfd3e4ae8 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -112,6 +112,8 @@ static int framedrop		= -1;
 static int fastset;
 static int force_palette;
 static int backlight;
+/* Bitmask marking allocated devices from 0 to OV511_MAX_UNIT_VIDEO */
+static unsigned long ov511_devused;
 static int unit_video[OV511_MAX_UNIT_VIDEO];
 static int remove_zeros;
 static int mirror;
@@ -5720,7 +5722,7 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct usb_device *dev = interface_to_usbdev(intf);
 	struct usb_interface_descriptor *idesc;
 	struct usb_ov511 *ov;
-	int i;
+	int i, rc, nr;
 
 	PDEBUG(1, "probing for device...");
 
@@ -5845,33 +5847,41 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	ov->vdev->parent = &intf->dev;
 	video_set_drvdata(ov->vdev, ov);
 
-	for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) {
-		/* Minor 0 cannot be specified; assume user wants autodetect */
-		if (unit_video[i] == 0)
-			break;
+	mutex_lock(&ov->lock);
 
-		if (video_register_device(ov->vdev, VFL_TYPE_GRABBER,
-			unit_video[i]) >= 0) {
-			break;
-		}
-	}
+	/* Check to see next free device and mark as used */
+	nr = find_first_zero_bit(&ov511_devused, OV511_MAX_UNIT_VIDEO);
+
+	/* Registers device */
+	if (unit_video[nr] != 0)
+		rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER,
+					   unit_video[nr]);
+	else
+		rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1);
 
-	/* Use the next available one */
-	if ((ov->vdev->minor == -1) &&
-	    video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1) < 0) {
+	if (rc < 0) {
 		err("video_register_device failed");
+		mutex_unlock(&ov->lock);
 		goto error;
 	}
 
+	/* Mark device as used */
+	ov511_devused |= 1 << nr;
+	ov->nr = nr;
+
 	dev_info(&intf->dev, "Device at %s registered to minor %d\n",
 		 ov->usb_path, ov->vdev->minor);
 
 	usb_set_intfdata(intf, ov);
 	if (ov_create_sysfs(ov->vdev)) {
 		err("ov_create_sysfs failed");
+		ov511_devused &= ~(1 << nr);
+		mutex_unlock(&ov->lock);
 		goto error;
 	}
 
+	mutex_lock(&ov->lock);
+
 	return 0;
 
 error:
@@ -5906,10 +5916,16 @@ ov51x_disconnect(struct usb_interface *intf)
 
 	PDEBUG(3, "");
 
+	mutex_lock(&ov->lock);
 	usb_set_intfdata (intf, NULL);
 
-	if (!ov)
+	if (!ov) {
+		mutex_unlock(&ov->lock);
 		return;
+	}
+
+	/* Free device number */
+	ov511_devused &= ~(1 << ov->nr);
 
 	if (ov->vdev)
 		video_unregister_device(ov->vdev);
@@ -5927,6 +5943,7 @@ ov51x_disconnect(struct usb_interface *intf)
 
 	ov->streaming = 0;
 	ov51x_unlink_isoc(ov);
+	mutex_unlock(&ov->lock);
 
 	ov->dev = NULL;
 
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
index 70d99e52329..c450c92468d 100644
--- a/drivers/media/video/ov511.h
+++ b/drivers/media/video/ov511.h
@@ -494,6 +494,9 @@ struct usb_ov511 {
 	int has_decoder;	/* Device has a video decoder */
 	int pal;		/* Device is designed for PAL resolution */
 
+	/* ov511 device number ID */
+	int nr;			/* Stores a device number */
+
 	/* I2C interface */
 	struct mutex i2c_lock;	  /* Protect I2C controller regs */
 	unsigned char primary_i2c_slave;  /* I2C write id of sensor */
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index c0d91125286..0bce255168b 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -1067,10 +1067,12 @@ static int ov772x_probe(struct i2c_client *client,
 	struct i2c_adapter        *adapter = to_i2c_adapter(client->dev.parent);
 	int                        ret;
 
-	info = client->dev.platform_data;
-	if (!info)
+	if (!client->dev.platform_data)
 		return -EINVAL;
 
+	info = container_of(client->dev.platform_data,
+			    struct ov772x_camera_info, link);
+
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&adapter->dev,
 			"I2C-Adapter doesn't support "
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 1cb6a260e8b..336a20eded0 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -71,6 +71,7 @@ static const struct pvr2_device_desc pvr2_device_29xxx = {
 		.flag_has_svideo = !0,
 		.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
 		.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+		.ir_scheme = PVR2_IR_SCHEME_29XXX,
 };
 
 
@@ -284,6 +285,11 @@ static struct tda10048_config hauppauge_tda10048_config = {
 	.output_mode    = TDA10048_PARALLEL_OUTPUT,
 	.fwbulkwritelen = TDA10048_BULKWRITE_50,
 	.inversion      = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3800,
+	.dtv8_if_freq_khz = TDA10048_IF_4300,
+	.clk_freq_khz   = TDA10048_CLK_16000,
+	.disable_gate_access = 1,
 };
 
 static struct tda829x_config tda829x_no_probe = {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
index 3e553389cbc..ea04ecf8aa3 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
@@ -69,6 +69,7 @@ struct pvr2_string_table {
 #define PVR2_ROUTING_SCHEME_HAUPPAUGE 0
 #define PVR2_ROUTING_SCHEME_GOTVIEW 1
 #define PVR2_ROUTING_SCHEME_ONAIR 2
+#define PVR2_ROUTING_SCHEME_AV400 3
 
 #define PVR2_DIGITAL_SCHEME_NONE 0
 #define PVR2_DIGITAL_SCHEME_HAUPPAUGE 1
@@ -78,8 +79,10 @@ struct pvr2_string_table {
 #define PVR2_LED_SCHEME_HAUPPAUGE 1
 
 #define PVR2_IR_SCHEME_NONE 0
-#define PVR2_IR_SCHEME_24XXX 1
-#define PVR2_IR_SCHEME_ZILOG 2
+#define PVR2_IR_SCHEME_24XXX 1 /* FX2-controlled IR */
+#define PVR2_IR_SCHEME_ZILOG 2 /* HVR-1950 style (must be taken out of reset) */
+#define PVR2_IR_SCHEME_24XXX_MCE 3 /* 24xxx MCE device */
+#define PVR2_IR_SCHEME_29XXX 4 /* Original 29xxx device */
 
 /* This describes a particular hardware type (except for the USB device ID
    which must live in a separate structure due to environmental
@@ -162,19 +165,9 @@ struct pvr2_device_desc {
 	   ensure that it is found. */
 	unsigned int flag_has_wm8775:1;
 
-	/* Indicate any specialized IR scheme that might need to be
-	   supported by this driver.  If not set, then it is assumed that
-	   IR can work without help from the driver (which is frequently
-	   the case).  This is otherwise set to one of
-	   PVR2_IR_SCHEME_xxxx.  For "xxxx", the value "24XXX" indicates a
-	   Hauppauge 24xxx class device which has an FPGA-hosted IR
-	   receiver that can only be reached via FX2 command codes.  In
-	   that case the pvrusb2 driver will emulate the behavior of the
-	   older 29xxx device's IR receiver (a "virtual" I2C chip) in terms
-	   of those command codes.  For the value "ZILOG", we're dealing
-	   with an IR chip that must be taken out of reset via another FX2
-	   command code (which is the case for HVR-1950 devices). */
-	unsigned int ir_scheme:2;
+	/* Indicate IR scheme of hardware.  If not set, then it is assumed
+	   that IR can work without any help from the driver. */
+	unsigned int ir_scheme:3;
 
 	/* These bits define which kinds of sources the device can handle.
 	   Note: Digital tuner presence is inferred by the
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index 5d75eb5211b..5b152ff20bd 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -200,6 +200,9 @@ struct pvr2_hdw {
 	int i2c_cx25840_hack_state;
 	int i2c_linked;
 
+	/* IR related */
+	unsigned int ir_scheme_active; /* IR scheme as seen from the outside */
+
 	/* Frequency table */
 	unsigned int freqTable[FREQTABLE_SIZE];
 	unsigned int freqProgSlot;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index add3395d324..0c745b142fb 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -142,6 +142,15 @@ static const unsigned char *module_i2c_addresses[] = {
 };
 
 
+static const char *ir_scheme_names[] = {
+	[PVR2_IR_SCHEME_NONE] = "none",
+	[PVR2_IR_SCHEME_29XXX] = "29xxx",
+	[PVR2_IR_SCHEME_24XXX] = "24xxx (29xxx emulation)",
+	[PVR2_IR_SCHEME_24XXX_MCE] = "24xxx (MCE device)",
+	[PVR2_IR_SCHEME_ZILOG] = "Zilog",
+};
+
+
 /* Define the list of additional controls we'll dynamically construct based
    on query of the cx2341x module. */
 struct pvr2_mpeg_ids {
@@ -2170,7 +2179,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
 	}
 
 	/* Take the IR chip out of reset, if appropriate */
-	if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_ZILOG) {
+	if (hdw->ir_scheme_active == PVR2_IR_SCHEME_ZILOG) {
 		pvr2_issue_simple_cmd(hdw,
 				      FX2CMD_HCW_ZILOG_RESET |
 				      (1 << 8) |
@@ -2451,6 +2460,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
 				GFP_KERNEL);
 	if (!hdw->controls) goto fail;
 	hdw->hdw_desc = hdw_desc;
+	hdw->ir_scheme_active = hdw->hdw_desc->ir_scheme;
 	for (idx = 0; idx < hdw->control_cnt; idx++) {
 		cptr = hdw->controls + idx;
 		cptr->hdw = hdw;
@@ -4809,6 +4819,12 @@ static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which,
 			stats.buffers_processed,
 			stats.buffers_failed);
 	}
+	case 6: {
+		unsigned int id = hdw->ir_scheme_active;
+		return scnprintf(buf, acnt, "ir scheme: id=%d %s", id,
+				 (id >= ARRAY_SIZE(ir_scheme_names) ?
+				  "?" : ir_scheme_names[id]));
+	}
 	default: break;
 	}
 	return 0;
@@ -4825,65 +4841,35 @@ static unsigned int pvr2_hdw_report_clients(struct pvr2_hdw *hdw,
 	unsigned int tcnt = 0;
 	unsigned int ccnt;
 	struct i2c_client *client;
-	struct list_head *item;
-	void *cd;
 	const char *p;
 	unsigned int id;
 
-	ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers:");
+	ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers and I2C clients:\n");
 	tcnt += ccnt;
 	v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
 		id = sd->grp_id;
 		p = NULL;
 		if (id < ARRAY_SIZE(module_names)) p = module_names[id];
 		if (p) {
-			ccnt = scnprintf(buf + tcnt, acnt - tcnt, " %s", p);
+			ccnt = scnprintf(buf + tcnt, acnt - tcnt, "  %s:", p);
 			tcnt += ccnt;
 		} else {
 			ccnt = scnprintf(buf + tcnt, acnt - tcnt,
-					 " (unknown id=%u)", id);
+					 "  (unknown id=%u):", id);
 			tcnt += ccnt;
 		}
-	}
-	ccnt = scnprintf(buf + tcnt, acnt - tcnt, "\n");
-	tcnt += ccnt;
-
-	ccnt = scnprintf(buf + tcnt, acnt - tcnt, "I2C clients:\n");
-	tcnt += ccnt;
-
-	mutex_lock(&hdw->i2c_adap.clist_lock);
-	list_for_each(item, &hdw->i2c_adap.clients) {
-		client = list_entry(item, struct i2c_client, list);
-		ccnt = scnprintf(buf + tcnt, acnt - tcnt,
-				 "  %s: i2c=%02x", client->name, client->addr);
-		tcnt += ccnt;
-		cd = i2c_get_clientdata(client);
-		v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
-			if (cd == sd) {
-				id = sd->grp_id;
-				p = NULL;
-				if (id < ARRAY_SIZE(module_names)) {
-					p = module_names[id];
-				}
-				if (p) {
-					ccnt = scnprintf(buf + tcnt,
-							 acnt - tcnt,
-							 " subdev=%s", p);
-					tcnt += ccnt;
-				} else {
-					ccnt = scnprintf(buf + tcnt,
-							 acnt - tcnt,
-							 " subdev= id %u)",
-							 id);
-					tcnt += ccnt;
-				}
-				break;
-			}
+		client = v4l2_get_subdevdata(sd);
+		if (client) {
+			ccnt = scnprintf(buf + tcnt, acnt - tcnt,
+					 " %s @ %02x\n", client->name,
+					 client->addr);
+			tcnt += ccnt;
+		} else {
+			ccnt = scnprintf(buf + tcnt, acnt - tcnt,
+					 " no i2c client\n");
+			tcnt += ccnt;
 		}
-		ccnt = scnprintf(buf + tcnt, acnt - tcnt, "\n");
-		tcnt += ccnt;
 	}
-	mutex_unlock(&hdw->i2c_adap.clist_lock);
 	return tcnt;
 }
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index 9af282f9e76..610bd848df2 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -42,6 +42,18 @@ static int ir_mode[PVR_NUM] = { [0 ... PVR_NUM-1] = 1 };
 module_param_array(ir_mode, int, NULL, 0444);
 MODULE_PARM_DESC(ir_mode,"specify: 0=disable IR reception, 1=normal IR");
 
+static int pvr2_disable_ir_video;
+module_param_named(disable_autoload_ir_video, pvr2_disable_ir_video,
+		   int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(disable_autoload_ir_video,
+		 "1=do not try to autoload ir_video IR receiver");
+
+/* Mapping of IR schemes to known I2C addresses - if any */
+static const unsigned char ir_video_addresses[] = {
+	[PVR2_IR_SCHEME_29XXX] = 0x18,
+	[PVR2_IR_SCHEME_24XXX] = 0x18,
+};
+
 static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */
 			  u8 i2c_addr,      /* I2C address we're talking to */
 			  u8 *data,         /* Data to write */
@@ -559,6 +571,31 @@ static void do_i2c_scan(struct pvr2_hdw *hdw)
 	printk(KERN_INFO "%s: i2c scan done.\n", hdw->name);
 }
 
+static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw)
+{
+	struct i2c_board_info info;
+	unsigned char addr = 0;
+	if (pvr2_disable_ir_video) {
+		pvr2_trace(PVR2_TRACE_INFO,
+			   "Automatic binding of ir_video has been disabled.");
+		return;
+	}
+	if (hdw->ir_scheme_active < ARRAY_SIZE(ir_video_addresses)) {
+		addr = ir_video_addresses[hdw->ir_scheme_active];
+	}
+	if (!addr) {
+		/* The device either doesn't support I2C-based IR or we
+		   don't know (yet) how to operate IR on the device. */
+		return;
+	}
+	pvr2_trace(PVR2_TRACE_INFO,
+		   "Binding ir_video to i2c address 0x%02x.", addr);
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+	info.addr = addr;
+	i2c_new_device(&hdw->i2c_adap, &info);
+}
+
 void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
 {
 	unsigned int idx;
@@ -574,7 +611,9 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
 		printk(KERN_INFO "%s: IR disabled\n",hdw->name);
 		hdw->i2c_func[0x18] = i2c_black_hole;
 	} else if (ir_mode[hdw->unit_number] == 1) {
-		if (hdw->hdw_desc->ir_scheme == PVR2_IR_SCHEME_24XXX) {
+		if (hdw->ir_scheme_active == PVR2_IR_SCHEME_24XXX) {
+			/* Set up translation so that our IR looks like a
+			   29xxx device */
 			hdw->i2c_func[0x18] = i2c_24xxx_ir;
 		}
 	}
@@ -597,15 +636,23 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw)
 	i2c_add_adapter(&hdw->i2c_adap);
 	if (hdw->i2c_func[0x18] == i2c_24xxx_ir) {
 		/* Probe for a different type of IR receiver on this
-		   device.  If present, disable the emulated IR receiver. */
+		   device.  This is really the only way to differentiate
+		   older 24xxx devices from 24xxx variants that include an
+		   IR blaster.  If the IR blaster is present, the IR
+		   receiver is part of that chip and thus we must disable
+		   the emulated IR receiver. */
 		if (do_i2c_probe(hdw, 0x71)) {
 			pvr2_trace(PVR2_TRACE_INFO,
 				   "Device has newer IR hardware;"
 				   " disabling unneeded virtual IR device");
 			hdw->i2c_func[0x18] = NULL;
+			/* Remember that this is a different device... */
+			hdw->ir_scheme_active = PVR2_IR_SCHEME_24XXX_MCE;
 		}
 	}
 	if (i2c_scan) do_i2c_scan(hdw);
+
+	pvr2_i2c_register_ir(hdw);
 }
 
 void pvr2_i2c_core_done(struct pvr2_hdw *hdw)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 299c1cbc383..6c23456e0bd 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -539,7 +539,7 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp)
 					 &sfp->attr_unit_number);
 	}
 	pvr2_sysfs_trace("Destroying class_dev id=%p",sfp->class_dev);
-	sfp->class_dev->driver_data = NULL;
+	dev_set_drvdata(sfp->class_dev, NULL);
 	device_unregister(sfp->class_dev);
 	sfp->class_dev = NULL;
 }
@@ -549,7 +549,7 @@ static ssize_t v4l_minor_number_show(struct device *class_dev,
 				     struct device_attribute *attr, char *buf)
 {
 	struct pvr2_sysfs *sfp;
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 	return scnprintf(buf,PAGE_SIZE,"%d\n",
 			 pvr2_hdw_v4l_get_minor_number(sfp->channel.hdw,
@@ -561,7 +561,7 @@ static ssize_t bus_info_show(struct device *class_dev,
 			     struct device_attribute *attr, char *buf)
 {
 	struct pvr2_sysfs *sfp;
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 	return scnprintf(buf,PAGE_SIZE,"%s\n",
 			 pvr2_hdw_get_bus_info(sfp->channel.hdw));
@@ -572,7 +572,7 @@ static ssize_t hdw_name_show(struct device *class_dev,
 			     struct device_attribute *attr, char *buf)
 {
 	struct pvr2_sysfs *sfp;
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 	return scnprintf(buf,PAGE_SIZE,"%s\n",
 			 pvr2_hdw_get_type(sfp->channel.hdw));
@@ -583,7 +583,7 @@ static ssize_t hdw_desc_show(struct device *class_dev,
 			     struct device_attribute *attr, char *buf)
 {
 	struct pvr2_sysfs *sfp;
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 	return scnprintf(buf,PAGE_SIZE,"%s\n",
 			 pvr2_hdw_get_desc(sfp->channel.hdw));
@@ -595,7 +595,7 @@ static ssize_t v4l_radio_minor_number_show(struct device *class_dev,
 					   char *buf)
 {
 	struct pvr2_sysfs *sfp;
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 	return scnprintf(buf,PAGE_SIZE,"%d\n",
 			 pvr2_hdw_v4l_get_minor_number(sfp->channel.hdw,
@@ -607,7 +607,7 @@ static ssize_t unit_number_show(struct device *class_dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct pvr2_sysfs *sfp;
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 	return scnprintf(buf,PAGE_SIZE,"%d\n",
 			 pvr2_hdw_get_unit_number(sfp->channel.hdw));
@@ -635,7 +635,7 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
 	class_dev->parent = &usb_dev->dev;
 
 	sfp->class_dev = class_dev;
-	class_dev->driver_data = sfp;
+	dev_set_drvdata(class_dev, sfp);
 	ret = device_register(class_dev);
 	if (ret) {
 		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
@@ -792,7 +792,7 @@ static ssize_t debuginfo_show(struct device *class_dev,
 			      struct device_attribute *attr, char *buf)
 {
 	struct pvr2_sysfs *sfp;
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 	pvr2_hdw_trigger_module_log(sfp->channel.hdw);
 	return pvr2_debugifc_print_info(sfp->channel.hdw,buf,PAGE_SIZE);
@@ -803,7 +803,7 @@ static ssize_t debugcmd_show(struct device *class_dev,
 			     struct device_attribute *attr, char *buf)
 {
 	struct pvr2_sysfs *sfp;
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 	return pvr2_debugifc_print_status(sfp->channel.hdw,buf,PAGE_SIZE);
 }
@@ -816,7 +816,7 @@ static ssize_t debugcmd_store(struct device *class_dev,
 	struct pvr2_sysfs *sfp;
 	int ret;
 
-	sfp = (struct pvr2_sysfs *)class_dev->driver_data;
+	sfp = dev_get_drvdata(class_dev);
 	if (!sfp) return -EINVAL;
 
 	ret = pvr2_debugifc_docmd(sfp->channel.hdw,buf,count);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 9e0f2b07b93..2d8825e5b1b 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -90,7 +90,7 @@ static struct v4l2_capability pvr_capability ={
 	.driver         = "pvrusb2",
 	.card           = "Hauppauge WinTV pvr-usb2",
 	.bus_info       = "usb",
-	.version        = KERNEL_VERSION(0,8,0),
+	.version        = KERNEL_VERSION(0, 9, 0),
 	.capabilities   = (V4L2_CAP_VIDEO_CAPTURE |
 			   V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO |
 			   V4L2_CAP_READWRITE),
@@ -267,7 +267,7 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		memset(&tmp,0,sizeof(tmp));
 		tmp.index = vi->index;
 		ret = 0;
-		if ((vi->index < 0) || (vi->index >= fh->input_cnt)) {
+		if (vi->index >= fh->input_cnt) {
 			ret = -EINVAL;
 			break;
 		}
@@ -331,7 +331,7 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	case VIDIOC_S_INPUT:
 	{
 		struct v4l2_input *vi = (struct v4l2_input *)arg;
-		if ((vi->index < 0) || (vi->index >= fh->input_cnt)) {
+		if (vi->index >= fh->input_cnt) {
 			ret = -ERANGE;
 			break;
 		}
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 7c542caf248..db25c3034c1 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -601,7 +601,7 @@ static void pwc_snapshot_button(struct pwc_device *pdev, int down)
 
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 	if (pdev->button_dev) {
-		input_report_key(pdev->button_dev, BTN_0, down);
+		input_report_key(pdev->button_dev, KEY_CAMERA, down);
 		input_sync(pdev->button_dev);
 	}
 #endif
@@ -1783,7 +1783,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		return -ENOMEM;
 	}
 	memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
-	pdev->vdev->parent = &(udev->dev);
+	pdev->vdev->parent = &intf->dev;
 	strcpy(pdev->vdev->name, name);
 	video_set_drvdata(pdev->vdev, pdev);
 
@@ -1847,7 +1847,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	usb_to_input_id(pdev->udev, &pdev->button_dev->id);
 	pdev->button_dev->dev.parent = &pdev->udev->dev;
 	pdev->button_dev->evbit[0] = BIT_MASK(EV_KEY);
-	pdev->button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+	pdev->button_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
 
 	rc = input_register_device(pdev->button_dev);
 	if (rc) {
diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c
index bc0a464295c..2876ce08451 100644
--- a/drivers/media/video/pwc/pwc-v4l.c
+++ b/drivers/media/video/pwc/pwc-v4l.c
@@ -1107,7 +1107,7 @@ long pwc_video_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 				return -EINVAL;
 			if (buf->memory != V4L2_MEMORY_MMAP)
 				return -EINVAL;
-			if (buf->index < 0 || buf->index >= pwc_mbufs)
+			if (buf->index >= pwc_mbufs)
 				return -EINVAL;
 
 			buf->flags |= V4L2_BUF_FLAG_QUEUED;
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index c639845460f..f60de40fd21 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -202,7 +202,7 @@ struct pxa_buffer {
 };
 
 struct pxa_camera_dev {
-	struct device		*dev;
+	struct soc_camera_host	soc_host;
 	/* PXA27x is only supposed to handle one camera on its Quick Capture
 	 * interface. If anyone ever builds hardware to enable more than
 	 * one camera, they will have to modify this driver too */
@@ -261,7 +261,6 @@ static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
 {
 	struct soc_camera_device *icd = vq->priv_data;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct pxa_camera_dev *pcdev = ici->priv;
 	struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
 	int i;
 
@@ -278,7 +277,7 @@ static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
 
 	for (i = 0; i < ARRAY_SIZE(buf->dmas); i++) {
 		if (buf->dmas[i].sg_cpu)
-			dma_free_coherent(pcdev->dev, buf->dmas[i].sg_size,
+			dma_free_coherent(ici->dev, buf->dmas[i].sg_size,
 					  buf->dmas[i].sg_cpu,
 					  buf->dmas[i].sg_dma);
 		buf->dmas[i].sg_cpu = NULL;
@@ -338,14 +337,14 @@ static int pxa_init_dma_channel(struct pxa_camera_dev *pcdev,
 	int dma_len = 0, xfer_len = 0;
 
 	if (pxa_dma->sg_cpu)
-		dma_free_coherent(pcdev->dev, pxa_dma->sg_size,
+		dma_free_coherent(pcdev->soc_host.dev, pxa_dma->sg_size,
 				  pxa_dma->sg_cpu, pxa_dma->sg_dma);
 
 	sglen = calculate_dma_sglen(*sg_first, dma->sglen,
 				    *sg_first_ofs, size);
 
 	pxa_dma->sg_size = (sglen + 1) * sizeof(struct pxa_dma_desc);
-	pxa_dma->sg_cpu = dma_alloc_coherent(pcdev->dev, pxa_dma->sg_size,
+	pxa_dma->sg_cpu = dma_alloc_coherent(pcdev->soc_host.dev, pxa_dma->sg_size,
 					     &pxa_dma->sg_dma, GFP_KERNEL);
 	if (!pxa_dma->sg_cpu)
 		return -ENOMEM;
@@ -353,7 +352,7 @@ static int pxa_init_dma_channel(struct pxa_camera_dev *pcdev,
 	pxa_dma->sglen = sglen;
 	offset = *sg_first_ofs;
 
-	dev_dbg(pcdev->dev, "DMA: sg_first=%p, sglen=%d, ofs=%d, dma.desc=%x\n",
+	dev_dbg(pcdev->soc_host.dev, "DMA: sg_first=%p, sglen=%d, ofs=%d, dma.desc=%x\n",
 		*sg_first, sglen, *sg_first_ofs, pxa_dma->sg_dma);
 
 
@@ -376,7 +375,7 @@ static int pxa_init_dma_channel(struct pxa_camera_dev *pcdev,
 		pxa_dma->sg_cpu[i].ddadr =
 			pxa_dma->sg_dma + (i + 1) * sizeof(struct pxa_dma_desc);
 
-		dev_vdbg(pcdev->dev, "DMA: desc.%08x->@phys=0x%08x, len=%d\n",
+		dev_vdbg(pcdev->soc_host.dev, "DMA: desc.%08x->@phys=0x%08x, len=%d\n",
 			 pxa_dma->sg_dma + i * sizeof(struct pxa_dma_desc),
 			 sg_dma_address(sg) + offset, xfer_len);
 		offset = 0;
@@ -488,7 +487,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 		ret = pxa_init_dma_channel(pcdev, buf, dma, 0, CIBR0, size_y,
 					   &sg, &next_ofs);
 		if (ret) {
-			dev_err(pcdev->dev,
+			dev_err(pcdev->soc_host.dev,
 				"DMA initialization for Y/RGB failed\n");
 			goto fail;
 		}
@@ -498,7 +497,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 			ret = pxa_init_dma_channel(pcdev, buf, dma, 1, CIBR1,
 						   size_u, &sg, &next_ofs);
 		if (ret) {
-			dev_err(pcdev->dev,
+			dev_err(pcdev->soc_host.dev,
 				"DMA initialization for U failed\n");
 			goto fail_u;
 		}
@@ -508,7 +507,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 			ret = pxa_init_dma_channel(pcdev, buf, dma, 2, CIBR2,
 						   size_v, &sg, &next_ofs);
 		if (ret) {
-			dev_err(pcdev->dev,
+			dev_err(pcdev->soc_host.dev,
 				"DMA initialization for V failed\n");
 			goto fail_v;
 		}
@@ -522,10 +521,10 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 	return 0;
 
 fail_v:
-	dma_free_coherent(pcdev->dev, buf->dmas[1].sg_size,
+	dma_free_coherent(pcdev->soc_host.dev, buf->dmas[1].sg_size,
 			  buf->dmas[1].sg_cpu, buf->dmas[1].sg_dma);
 fail_u:
-	dma_free_coherent(pcdev->dev, buf->dmas[0].sg_size,
+	dma_free_coherent(pcdev->soc_host.dev, buf->dmas[0].sg_size,
 			  buf->dmas[0].sg_cpu, buf->dmas[0].sg_dma);
 fail:
 	free_buffer(vq, buf);
@@ -549,7 +548,7 @@ static void pxa_dma_start_channels(struct pxa_camera_dev *pcdev)
 	active = pcdev->active;
 
 	for (i = 0; i < pcdev->channels; i++) {
-		dev_dbg(pcdev->dev, "%s (channel=%d) ddadr=%08x\n", __func__,
+		dev_dbg(pcdev->soc_host.dev, "%s (channel=%d) ddadr=%08x\n", __func__,
 			i, active->dmas[i].sg_dma);
 		DDADR(pcdev->dma_chans[i]) = active->dmas[i].sg_dma;
 		DCSR(pcdev->dma_chans[i]) = DCSR_RUN;
@@ -561,7 +560,7 @@ static void pxa_dma_stop_channels(struct pxa_camera_dev *pcdev)
 	int i;
 
 	for (i = 0; i < pcdev->channels; i++) {
-		dev_dbg(pcdev->dev, "%s (channel=%d)\n", __func__, i);
+		dev_dbg(pcdev->soc_host.dev, "%s (channel=%d)\n", __func__, i);
 		DCSR(pcdev->dma_chans[i]) = 0;
 	}
 }
@@ -597,7 +596,7 @@ static void pxa_camera_start_capture(struct pxa_camera_dev *pcdev)
 {
 	unsigned long cicr0, cifr;
 
-	dev_dbg(pcdev->dev, "%s\n", __func__);
+	dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
 	/* Reset the FIFOs */
 	cifr = __raw_readl(pcdev->base + CIFR) | CIFR_RESET_F;
 	__raw_writel(cifr, pcdev->base + CIFR);
@@ -617,7 +616,7 @@ static void pxa_camera_stop_capture(struct pxa_camera_dev *pcdev)
 	__raw_writel(cicr0, pcdev->base + CICR0);
 
 	pcdev->active = NULL;
-	dev_dbg(pcdev->dev, "%s\n", __func__);
+	dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
 }
 
 static void pxa_videobuf_queue(struct videobuf_queue *vq,
@@ -686,7 +685,7 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
 	do_gettimeofday(&vb->ts);
 	vb->field_count++;
 	wake_up(&vb->done);
-	dev_dbg(pcdev->dev, "%s dequeud buffer (vb=0x%p)\n", __func__, vb);
+	dev_dbg(pcdev->soc_host.dev, "%s dequeud buffer (vb=0x%p)\n", __func__, vb);
 
 	if (list_empty(&pcdev->capture)) {
 		pxa_camera_stop_capture(pcdev);
@@ -722,7 +721,7 @@ static void pxa_camera_check_link_miss(struct pxa_camera_dev *pcdev)
 	for (i = 0; i < pcdev->channels; i++)
 		if (DDADR(pcdev->dma_chans[i]) != DDADR_STOP)
 			is_dma_stopped = 0;
-	dev_dbg(pcdev->dev, "%s : top queued buffer=%p, dma_stopped=%d\n",
+	dev_dbg(pcdev->soc_host.dev, "%s : top queued buffer=%p, dma_stopped=%d\n",
 		__func__, pcdev->active, is_dma_stopped);
 	if (pcdev->active && is_dma_stopped)
 		pxa_camera_start_capture(pcdev);
@@ -747,12 +746,12 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
 		overrun |= CISR_IFO_1 | CISR_IFO_2;
 
 	if (status & DCSR_BUSERR) {
-		dev_err(pcdev->dev, "DMA Bus Error IRQ!\n");
+		dev_err(pcdev->soc_host.dev, "DMA Bus Error IRQ!\n");
 		goto out;
 	}
 
 	if (!(status & (DCSR_ENDINTR | DCSR_STARTINTR))) {
-		dev_err(pcdev->dev, "Unknown DMA IRQ source, "
+		dev_err(pcdev->soc_host.dev, "Unknown DMA IRQ source, "
 			"status: 0x%08x\n", status);
 		goto out;
 	}
@@ -776,7 +775,7 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
 	buf = container_of(vb, struct pxa_buffer, vb);
 	WARN_ON(buf->inwork || list_empty(&vb->queue));
 
-	dev_dbg(pcdev->dev, "%s channel=%d %s%s(vb=0x%p) dma.desc=%x\n",
+	dev_dbg(pcdev->soc_host.dev, "%s channel=%d %s%s(vb=0x%p) dma.desc=%x\n",
 		__func__, channel, status & DCSR_STARTINTR ? "SOF " : "",
 		status & DCSR_ENDINTR ? "EOF " : "", vb, DDADR(channel));
 
@@ -787,7 +786,7 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
 		 */
 		if (camera_status & overrun &&
 		    !list_is_last(pcdev->capture.next, &pcdev->capture)) {
-			dev_dbg(pcdev->dev, "FIFO overrun! CISR: %x\n",
+			dev_dbg(pcdev->soc_host.dev, "FIFO overrun! CISR: %x\n",
 				camera_status);
 			pxa_camera_stop_capture(pcdev);
 			pxa_camera_start_capture(pcdev);
@@ -854,7 +853,7 @@ static u32 mclk_get_divisor(struct pxa_camera_dev *pcdev)
 	/* mclk <= ciclk / 4 (27.4.2) */
 	if (mclk > lcdclk / 4) {
 		mclk = lcdclk / 4;
-		dev_warn(pcdev->dev, "Limiting master clock to %lu\n", mclk);
+		dev_warn(pcdev->soc_host.dev, "Limiting master clock to %lu\n", mclk);
 	}
 
 	/* We verify mclk != 0, so if anyone breaks it, here comes their Oops */
@@ -864,7 +863,7 @@ static u32 mclk_get_divisor(struct pxa_camera_dev *pcdev)
 	if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN)
 		pcdev->mclk = lcdclk / (2 * (div + 1));
 
-	dev_dbg(pcdev->dev, "LCD clock %luHz, target freq %luHz, "
+	dev_dbg(pcdev->soc_host.dev, "LCD clock %luHz, target freq %luHz, "
 		"divisor %u\n", lcdclk, mclk, div);
 
 	return div;
@@ -884,12 +883,12 @@ static void pxa_camera_activate(struct pxa_camera_dev *pcdev)
 	struct pxacamera_platform_data *pdata = pcdev->pdata;
 	u32 cicr4 = 0;
 
-	dev_dbg(pcdev->dev, "Registered platform device at %p data %p\n",
+	dev_dbg(pcdev->soc_host.dev, "Registered platform device at %p data %p\n",
 		pcdev, pdata);
 
 	if (pdata && pdata->init) {
-		dev_dbg(pcdev->dev, "%s: Init gpios\n", __func__);
-		pdata->init(pcdev->dev);
+		dev_dbg(pcdev->soc_host.dev, "%s: Init gpios\n", __func__);
+		pdata->init(pcdev->soc_host.dev);
 	}
 
 	/* disable all interrupts */
@@ -931,7 +930,7 @@ static irqreturn_t pxa_camera_irq(int irq, void *data)
 	struct videobuf_buffer *vb;
 
 	status = __raw_readl(pcdev->base + CISR);
-	dev_dbg(pcdev->dev, "Camera interrupt status 0x%lx\n", status);
+	dev_dbg(pcdev->soc_host.dev, "Camera interrupt status 0x%lx\n", status);
 
 	if (!status)
 		return IRQ_NONE;
@@ -1259,7 +1258,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(&ici->dev, "Providing format %s using %s\n",
+			dev_dbg(ici->dev, "Providing format %s using %s\n",
 				pxa_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -1274,7 +1273,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(&ici->dev, "Providing format %s packed\n",
+			dev_dbg(ici->dev, "Providing format %s packed\n",
 				icd->formats[idx].name);
 		}
 		break;
@@ -1286,7 +1285,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(&ici->dev,
+			dev_dbg(ici->dev,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -1315,11 +1314,11 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 	icd->sense = NULL;
 
 	if (ret < 0) {
-		dev_warn(&ici->dev, "Failed to crop to %ux%u@%u:%u\n",
+		dev_warn(ici->dev, "Failed to crop to %ux%u@%u:%u\n",
 			 rect->width, rect->height, rect->left, rect->top);
 	} else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
 		if (sense.pixel_clock > sense.pixel_clock_max) {
-			dev_err(&ici->dev,
+			dev_err(ici->dev,
 				"pixel clock %lu set by the camera too high!",
 				sense.pixel_clock);
 			return -EIO;
@@ -1347,7 +1346,7 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pix->pixelformat);
+		dev_warn(ici->dev, "Format %x not found\n", pix->pixelformat);
 		return -EINVAL;
 	}
 
@@ -1363,11 +1362,11 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 	icd->sense = NULL;
 
 	if (ret < 0) {
-		dev_warn(&ici->dev, "Failed to configure for format %x\n",
+		dev_warn(ici->dev, "Failed to configure for format %x\n",
 			 pix->pixelformat);
 	} else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
 		if (sense.pixel_clock > sense.pixel_clock_max) {
-			dev_err(&ici->dev,
+			dev_err(ici->dev,
 				"pixel clock %lu set by the camera too high!",
 				sense.pixel_clock);
 			return -EIO;
@@ -1395,7 +1394,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -1552,13 +1551,7 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
 	.set_bus_param	= pxa_camera_set_bus_param,
 };
 
-/* Should be allocated dynamically too, but we have only one. */
-static struct soc_camera_host pxa_soc_camera_host = {
-	.drv_name		= PXA_CAM_DRV_NAME,
-	.ops			= &pxa_soc_camera_host_ops,
-};
-
-static int pxa_camera_probe(struct platform_device *pdev)
+static int __devinit pxa_camera_probe(struct platform_device *pdev)
 {
 	struct pxa_camera_dev *pcdev;
 	struct resource *res;
@@ -1586,7 +1579,6 @@ static int pxa_camera_probe(struct platform_device *pdev)
 		goto exit_kfree;
 	}
 
-	dev_set_drvdata(&pdev->dev, pcdev);
 	pcdev->res = res;
 
 	pcdev->pdata = pdev->dev.platform_data;
@@ -1607,7 +1599,6 @@ static int pxa_camera_probe(struct platform_device *pdev)
 		pcdev->mclk = 20000000;
 	}
 
-	pcdev->dev = &pdev->dev;
 	pcdev->mclk_divisor = mclk_get_divisor(pcdev);
 
 	INIT_LIST_HEAD(&pcdev->capture);
@@ -1616,13 +1607,13 @@ static int pxa_camera_probe(struct platform_device *pdev)
 	/*
 	 * Request the regions.
 	 */
-	if (!request_mem_region(res->start, res->end - res->start + 1,
+	if (!request_mem_region(res->start, resource_size(res),
 				PXA_CAM_DRV_NAME)) {
 		err = -EBUSY;
 		goto exit_clk;
 	}
 
-	base = ioremap(res->start, res->end - res->start + 1);
+	base = ioremap(res->start, resource_size(res));
 	if (!base) {
 		err = -ENOMEM;
 		goto exit_release;
@@ -1634,29 +1625,29 @@ static int pxa_camera_probe(struct platform_device *pdev)
 	err = pxa_request_dma("CI_Y", DMA_PRIO_HIGH,
 			      pxa_camera_dma_irq_y, pcdev);
 	if (err < 0) {
-		dev_err(pcdev->dev, "Can't request DMA for Y\n");
+		dev_err(&pdev->dev, "Can't request DMA for Y\n");
 		goto exit_iounmap;
 	}
 	pcdev->dma_chans[0] = err;
-	dev_dbg(pcdev->dev, "got DMA channel %d\n", pcdev->dma_chans[0]);
+	dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_chans[0]);
 
 	err = pxa_request_dma("CI_U", DMA_PRIO_HIGH,
 			      pxa_camera_dma_irq_u, pcdev);
 	if (err < 0) {
-		dev_err(pcdev->dev, "Can't request DMA for U\n");
+		dev_err(&pdev->dev, "Can't request DMA for U\n");
 		goto exit_free_dma_y;
 	}
 	pcdev->dma_chans[1] = err;
-	dev_dbg(pcdev->dev, "got DMA channel (U) %d\n", pcdev->dma_chans[1]);
+	dev_dbg(&pdev->dev, "got DMA channel (U) %d\n", pcdev->dma_chans[1]);
 
 	err = pxa_request_dma("CI_V", DMA_PRIO_HIGH,
 			      pxa_camera_dma_irq_v, pcdev);
 	if (err < 0) {
-		dev_err(pcdev->dev, "Can't request DMA for V\n");
+		dev_err(&pdev->dev, "Can't request DMA for V\n");
 		goto exit_free_dma_u;
 	}
 	pcdev->dma_chans[2] = err;
-	dev_dbg(pcdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]);
+	dev_dbg(&pdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]);
 
 	DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
 	DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
@@ -1666,14 +1657,17 @@ static int pxa_camera_probe(struct platform_device *pdev)
 	err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME,
 			  pcdev);
 	if (err) {
-		dev_err(pcdev->dev, "Camera interrupt register failed \n");
+		dev_err(&pdev->dev, "Camera interrupt register failed \n");
 		goto exit_free_dma;
 	}
 
-	pxa_soc_camera_host.priv	= pcdev;
-	pxa_soc_camera_host.dev.parent	= &pdev->dev;
-	pxa_soc_camera_host.nr		= pdev->id;
-	err = soc_camera_host_register(&pxa_soc_camera_host);
+	pcdev->soc_host.drv_name	= PXA_CAM_DRV_NAME;
+	pcdev->soc_host.ops		= &pxa_soc_camera_host_ops;
+	pcdev->soc_host.priv		= pcdev;
+	pcdev->soc_host.dev		= &pdev->dev;
+	pcdev->soc_host.nr		= pdev->id;
+
+	err = soc_camera_host_register(&pcdev->soc_host);
 	if (err)
 		goto exit_free_irq;
 
@@ -1690,7 +1684,7 @@ exit_free_dma_y:
 exit_iounmap:
 	iounmap(base);
 exit_release:
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 exit_clk:
 	clk_put(pcdev->clk);
 exit_kfree:
@@ -1701,7 +1695,9 @@ exit:
 
 static int __devexit pxa_camera_remove(struct platform_device *pdev)
 {
-	struct pxa_camera_dev *pcdev = platform_get_drvdata(pdev);
+	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+	struct pxa_camera_dev *pcdev = container_of(soc_host,
+					struct pxa_camera_dev, soc_host);
 	struct resource *res;
 
 	clk_put(pcdev->clk);
@@ -1711,12 +1707,12 @@ static int __devexit pxa_camera_remove(struct platform_device *pdev)
 	pxa_free_dma(pcdev->dma_chans[2]);
 	free_irq(pcdev->irq, pcdev);
 
-	soc_camera_host_unregister(&pxa_soc_camera_host);
+	soc_camera_host_unregister(soc_host);
 
 	iounmap(pcdev->base);
 
 	res = pcdev->res;
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 
 	kfree(pcdev);
 
@@ -1730,11 +1726,11 @@ static struct platform_driver pxa_camera_driver = {
 		.name	= PXA_CAM_DRV_NAME,
 	},
 	.probe		= pxa_camera_probe,
-	.remove		= __exit_p(pxa_camera_remove),
+	.remove		= __devexit_p(pxa_camera_remove),
 };
 
 
-static int __devinit pxa_camera_init(void)
+static int __init pxa_camera_init(void)
 {
 	return platform_driver_register(&pxa_camera_driver);
 }
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 30f4698be90..6be845ccc7d 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -77,6 +77,8 @@
 #define MAX_CHANNELS		4
 #define S2255_MARKER_FRAME	0x2255DA4AL
 #define S2255_MARKER_RESPONSE	0x2255ACACL
+#define S2255_RESPONSE_SETMODE  0x01
+#define S2255_RESPONSE_FW       0x10
 #define S2255_USB_XFER_SIZE	(16 * 1024)
 #define MAX_CHANNELS		4
 #define MAX_PIPE_BUFFERS	1
@@ -107,6 +109,8 @@
 #define SCALE_4CIFS	1	/* 640x480(NTSC) or 704x576(PAL) */
 #define SCALE_2CIFS	2	/* 640x240(NTSC) or 704x288(PAL) */
 #define SCALE_1CIFS	3	/* 320x240(NTSC) or 352x288(PAL) */
+/* SCALE_4CIFSI is the 2 fields interpolated into one */
+#define SCALE_4CIFSI	4	/* 640x480(NTSC) or 704x576(PAL) high quality */
 
 #define COLOR_YUVPL	1	/* YUV planar */
 #define COLOR_YUVPK	2	/* YUV packed */
@@ -178,9 +182,6 @@ struct s2255_bufferi {
 
 struct s2255_dmaqueue {
 	struct list_head	active;
-	/* thread for acquisition */
-	struct task_struct	*kthread;
-	int			frame;
 	struct s2255_dev	*dev;
 	int			channel;
 };
@@ -210,16 +211,11 @@ struct s2255_pipeinfo {
 	u32 max_transfer_size;
 	u32 cur_transfer_size;
 	u8 *transfer_buffer;
-	u32 transfer_flags;;
 	u32 state;
-	u32 prev_state;
-	u32 urb_size;
 	void *stream_urb;
 	void *dev;	/* back pointer to s2255_dev struct*/
 	u32 err_count;
-	u32 buf_index;
 	u32 idx;
-	u32 priority_set;
 };
 
 struct s2255_fmt; /*forward declaration */
@@ -239,13 +235,13 @@ struct s2255_dev {
 	struct list_head	s2255_devlist;
 	struct timer_list	timer;
 	struct s2255_fw	*fw_data;
-	int			board_num;
-	int			is_open;
 	struct s2255_pipeinfo	pipes[MAX_PIPE_BUFFERS];
 	struct s2255_bufferi		buffer[MAX_CHANNELS];
 	struct s2255_mode	mode[MAX_CHANNELS];
 	/* jpeg compression */
 	struct v4l2_jpegcompression jc[MAX_CHANNELS];
+	/* capture parameters (for high quality mode full size) */
+	struct v4l2_captureparm cap_parm[MAX_CHANNELS];
 	const struct s2255_fmt	*cur_fmt[MAX_CHANNELS];
 	int			cur_frame[MAX_CHANNELS];
 	int			last_frame[MAX_CHANNELS];
@@ -297,9 +293,10 @@ struct s2255_fh {
 	int			resources[MAX_CHANNELS];
 };
 
-#define CUR_USB_FWVER	774	/* current cypress EEPROM firmware version */
+/* current cypress EEPROM firmware version */
+#define S2255_CUR_USB_FWVER	((3 << 8) | 6)
 #define S2255_MAJOR_VERSION	1
-#define S2255_MINOR_VERSION	13
+#define S2255_MINOR_VERSION	14
 #define S2255_RELEASE		0
 #define S2255_VERSION		KERNEL_VERSION(S2255_MAJOR_VERSION, \
 					       S2255_MINOR_VERSION, \
@@ -1027,9 +1024,16 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	fh->type = f->type;
 	norm = norm_minw(fh->dev->vdev[fh->channel]);
 	if (fh->width > norm_minw(fh->dev->vdev[fh->channel])) {
-		if (fh->height > norm_minh(fh->dev->vdev[fh->channel]))
-			fh->mode.scale = SCALE_4CIFS;
-		else
+		if (fh->height > norm_minh(fh->dev->vdev[fh->channel])) {
+			if (fh->dev->cap_parm[fh->channel].capturemode &
+			    V4L2_MODE_HIGHQUALITY) {
+				fh->mode.scale = SCALE_4CIFSI;
+				dprintk(2, "scale 4CIFSI\n");
+			} else {
+				fh->mode.scale = SCALE_4CIFS;
+				dprintk(2, "scale 4CIFS\n");
+			}
+		} else
 			fh->mode.scale = SCALE_2CIFS;
 
 	} else {
@@ -1130,6 +1134,7 @@ static u32 get_transfer_size(struct s2255_mode *mode)
 	if (mode->format == FORMAT_NTSC) {
 		switch (mode->scale) {
 		case SCALE_4CIFS:
+		case SCALE_4CIFSI:
 			linesPerFrame = NUM_LINES_4CIFS_NTSC * 2;
 			pixelsPerLine = LINE_SZ_4CIFS_NTSC;
 			break;
@@ -1147,6 +1152,7 @@ static u32 get_transfer_size(struct s2255_mode *mode)
 	} else if (mode->format == FORMAT_PAL) {
 		switch (mode->scale) {
 		case SCALE_4CIFS:
+		case SCALE_4CIFSI:
 			linesPerFrame = NUM_LINES_4CIFS_PAL * 2;
 			pixelsPerLine = LINE_SZ_4CIFS_PAL;
 			break;
@@ -1502,6 +1508,33 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv,
 	dprintk(2, "setting jpeg quality %d\n", jc->quality);
 	return 0;
 }
+
+static int vidioc_g_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *sp)
+{
+	struct s2255_fh *fh = priv;
+	struct s2255_dev *dev = fh->dev;
+	if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	sp->parm.capture.capturemode = dev->cap_parm[fh->channel].capturemode;
+	dprintk(2, "getting parm %d\n", sp->parm.capture.capturemode);
+	return 0;
+}
+
+static int vidioc_s_parm(struct file *file, void *priv,
+			 struct v4l2_streamparm *sp)
+{
+	struct s2255_fh *fh = priv;
+	struct s2255_dev *dev = fh->dev;
+
+	if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	dev->cap_parm[fh->channel].capturemode = sp->parm.capture.capturemode;
+	dprintk(2, "setting param capture mode %d\n",
+		sp->parm.capture.capturemode);
+	return 0;
+}
 static int s2255_open(struct file *file)
 {
 	int minor = video_devdata(file)->minor;
@@ -1793,6 +1826,8 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
 #endif
 	.vidioc_s_jpegcomp = vidioc_s_jpegcomp,
 	.vidioc_g_jpegcomp = vidioc_g_jpegcomp,
+	.vidioc_s_parm = vidioc_s_parm,
+	.vidioc_g_parm = vidioc_g_parm,
 };
 
 static struct video_device template = {
@@ -1818,7 +1853,6 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
 		INIT_LIST_HEAD(&dev->vidq[i].active);
 		dev->vidq[i].dev = dev;
 		dev->vidq[i].channel = i;
-		dev->vidq[i].kthread = NULL;
 		/* register 4 video devices */
 		dev->vdev[i] = video_device_alloc();
 		memcpy(dev->vdev[i], &template, sizeof(struct video_device));
@@ -1839,7 +1873,9 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
 			return ret;
 		}
 	}
-	printk(KERN_INFO "Sensoray 2255 V4L driver\n");
+	printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %d.%d\n",
+	       S2255_MAJOR_VERSION,
+	       S2255_MINOR_VERSION);
 	return ret;
 }
 
@@ -1929,14 +1965,14 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info)
 				if (!(cc >= 0 && cc < MAX_CHANNELS))
 					break;
 				switch (pdword[2]) {
-				case 0x01:
+				case S2255_RESPONSE_SETMODE:
 					/* check if channel valid */
 					/* set mode ready */
 					dev->setmode_ready[cc] = 1;
 					wake_up(&dev->wait_setmode[cc]);
 					dprintk(5, "setmode ready %d\n", cc);
 					break;
-				case 0x10:
+				case S2255_RESPONSE_FW:
 
 					dev->chn_ready |= (1 << cc);
 					if ((dev->chn_ready & 0x0f) != 0x0f)
@@ -2172,10 +2208,15 @@ static int s2255_board_init(struct s2255_dev *dev)
 	/* query the firmware */
 	fw_ver = s2255_get_fx2fw(dev);
 
-	printk(KERN_INFO "2255 usb firmware version %d \n", fw_ver);
-	if (fw_ver < CUR_USB_FWVER)
+	printk(KERN_INFO "2255 usb firmware version %d.%d\n",
+	       (fw_ver >> 8) & 0xff,
+	       fw_ver & 0xff);
+
+	if (fw_ver < S2255_CUR_USB_FWVER)
 		dev_err(&dev->udev->dev,
-			"usb firmware not up to date %d\n", fw_ver);
+			"usb firmware not up to date %d.%d\n",
+			(fw_ver >> 8) & 0xff,
+			fw_ver & 0xff);
 
 	for (j = 0; j < MAX_CHANNELS; j++) {
 		dev->b_acquire[j] = 0;
@@ -2240,8 +2281,10 @@ static void read_pipe_completion(struct urb *purb)
 		return;
 	}
 	status = purb->status;
-	if (status != 0) {
-		dprintk(2, "read_pipe_completion: err\n");
+	/* if shutting down, do not resubmit, exit immediately */
+	if (status == -ESHUTDOWN) {
+		dprintk(2, "read_pipe_completion: err shutdown\n");
+		pipe_info->err_count++;
 		return;
 	}
 
@@ -2250,9 +2293,13 @@ static void read_pipe_completion(struct urb *purb)
 		return;
 	}
 
-	s2255_read_video_callback(dev, pipe_info);
+	if (status == 0)
+		s2255_read_video_callback(dev, pipe_info);
+	else {
+		pipe_info->err_count++;
+		dprintk(1, "s2255drv: failed URB %d\n", status);
+	}
 
-	pipe_info->err_count = 0;
 	pipe = usb_rcvbulkpipe(dev->udev, dev->read_endpoint);
 	/* reuse urb */
 	usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
@@ -2264,7 +2311,6 @@ static void read_pipe_completion(struct urb *purb)
 	if (pipe_info->state != 0) {
 		if (usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL)) {
 			dev_err(&dev->udev->dev, "error submitting urb\n");
-			usb_free_urb(pipe_info->stream_urb);
 		}
 	} else {
 		dprintk(2, "read pipe complete state 0\n");
@@ -2283,8 +2329,7 @@ static int s2255_start_readpipe(struct s2255_dev *dev)
 
 	for (i = 0; i < MAX_PIPE_BUFFERS; i++) {
 		pipe_info->state = 1;
-		pipe_info->buf_index = (u32) i;
-		pipe_info->priority_set = 0;
+		pipe_info->err_count = 0;
 		pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!pipe_info->stream_urb) {
 			dev_err(&dev->udev->dev,
@@ -2298,7 +2343,6 @@ static int s2255_start_readpipe(struct s2255_dev *dev)
 				  pipe_info->cur_transfer_size,
 				  read_pipe_completion, pipe_info);
 
-		pipe_info->urb_size = sizeof(pipe_info->stream_urb);
 		dprintk(4, "submitting URB %p\n", pipe_info->stream_urb);
 		retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL);
 		if (retval) {
@@ -2403,8 +2447,6 @@ static void s2255_stop_readpipe(struct s2255_dev *dev)
 			if (pipe_info->state == 0)
 				continue;
 			pipe_info->state = 0;
-			pipe_info->prev_state = 1;
-
 		}
 	}
 
@@ -2542,7 +2584,9 @@ static int s2255_probe(struct usb_interface *interface,
 	s2255_probe_v4l(dev);
 	usb_reset_device(dev->udev);
 	/* load 2255 board specific */
-	s2255_board_init(dev);
+	retval = s2255_board_init(dev);
+	if (retval)
+		goto error;
 
 	dprintk(4, "before probe done %p\n", dev);
 	spin_lock_init(&dev->slock);
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 0ba68987bfc..5bcce092e80 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -44,6 +44,7 @@ config VIDEO_SAA7134_DVB
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
 	---help---
diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile
index 3dbaa19a6d0..604158a8c23 100644
--- a/drivers/media/video/saa7134/Makefile
+++ b/drivers/media/video/saa7134/Makefile
@@ -3,8 +3,7 @@ saa7134-objs :=	saa7134-cards.o saa7134-core.o saa7134-i2c.o	\
 		saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o    \
 		saa7134-video.o saa7134-input.o
 
-obj-$(CONFIG_VIDEO_SAA7134) +=  saa7134.o saa7134-empress.o \
-				saa6752hs.o
+obj-$(CONFIG_VIDEO_SAA7134) +=  saa6752hs.o saa7134.o saa7134-empress.o
 
 obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o
 
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index fdb19449d26..06861b782b9 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -1669,6 +1669,39 @@ struct saa7134_board saa7134_boards[] = {
 			.amux = LINE1,
 		},
 	},
+	[SAA7134_BOARD_AVERMEDIA_CARDBUS_501] = {
+		/* Oldrich Jedlicka <oldium.pro@seznam.cz> */
+		.name           = "AVerMedia Cardbus TV/Radio (E501R)",
+		.audio_clock    = 0x187de7,
+		.tuner_type     = TUNER_ALPS_TSBE5_PAL,
+		.radio_type     = TUNER_TEA5767,
+		.tuner_addr	= 0x61,
+		.radio_addr	= 0x60,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.gpiomask       = 0x08000000,
+		.inputs         = { {
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.tv   = 1,
+			.gpio = 0x08000000,
+		}, {
+			.name = name_comp1,
+			.vmux = 3,
+			.amux = LINE1,
+			.gpio = 0x08000000,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+			.gpio = 0x08000000,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+			.gpio = 0x00000000,
+		},
+	},
 	[SAA7134_BOARD_CINERGY400_CARDBUS] = {
 		.name           = "Terratec Cinergy 400 mobile",
 		.audio_clock    = 0x187de7,
@@ -3331,13 +3364,15 @@ struct saa7134_board saa7134_boards[] = {
 		},
 	},
 	[SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = {
-		.name           = "Hauppauge WinTV-HVR1110r3",
+		.name           = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_TDA8290,
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
 		.tuner_config   = 3,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.ts_type	= SAA7134_MPEG_TS_SERIAL,
 		.gpiomask       = 0x0800100, /* GPIO 21 is an INPUT */
 		.inputs         = {{
 			.name = name_tv,
@@ -4006,7 +4041,7 @@ struct saa7134_board saa7134_boards[] = {
 	[SAA7134_BOARD_BEHOLD_505FM] = {
 		/*       Beholder Intl. Ltd. 2008      */
 		/*Dmitry Belimov <d.belimov@gmail.com> */
-		.name           = "Beholder BeholdTV 505 FM/RDS",
+		.name           = "Beholder BeholdTV 505 FM",
 		.audio_clock    = 0x00200000,
 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
 		.radio_type     = UNSET,
@@ -4019,6 +4054,40 @@ struct saa7134_board saa7134_boards[] = {
 			.vmux = 3,
 			.amux = LINE2,
 			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.mute = {
+			.name = name_mute,
+			.amux = LINE1,
+		},
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_505RDS] = {
+		/*       Beholder Intl. Ltd. 2008      */
+		/*Dmitry Belimov <d.belimov@gmail.com> */
+		.name           = "Beholder BeholdTV 505 RDS",
+		.audio_clock    = 0x00200000,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.gpiomask       = 0x00008000,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = LINE2,
+			.tv   = 1,
 		},{
 			.name = name_comp1,
 			.vmux = 1,
@@ -4040,7 +4109,7 @@ struct saa7134_board saa7134_boards[] = {
 	[SAA7134_BOARD_BEHOLD_507_9FM] = {
 		/*       Beholder Intl. Ltd. 2008      */
 		/*Dmitry Belimov <d.belimov@gmail.com> */
-		.name           = "Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM",
+		.name           = "Beholder BeholdTV 507 FM / BeholdTV 509 FM",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
 		.radio_type     = UNSET,
@@ -4067,6 +4136,66 @@ struct saa7134_board saa7134_boards[] = {
 			.amux = LINE2,
 		},
 	},
+	[SAA7134_BOARD_BEHOLD_507RDS_MK5] = {
+		/*       Beholder Intl. Ltd. 2008      */
+		/*Dmitry Belimov <d.belimov@gmail.com> */
+		.name           = "Beholder BeholdTV 507 RDS",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.gpiomask       = 0x00008000,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+			.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_507RDS_MK3] = {
+		/*       Beholder Intl. Ltd. 2008      */
+		/*Dmitry Belimov <d.belimov@gmail.com> */
+		.name           = "Beholder BeholdTV 507 RDS",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.gpiomask       = 0x00008000,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+			.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
 	[SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = {
 		/*       Beholder Intl. Ltd. 2008      */
 		/*Dmitry Belimov <d.belimov@gmail.com> */
@@ -4101,9 +4230,121 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x000A8000,
 		},
 	},
-	[SAA7134_BOARD_BEHOLD_607_9FM] = {
+	[SAA7134_BOARD_BEHOLD_607FM_MK3] = {
+		/* Andrey Melnikoff <temnota@kmv.ru> */
+		.name           = "Beholder BeholdTV 607 FM",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_609FM_MK3] = {
+		/* Andrey Melnikoff <temnota@kmv.ru> */
+		.name           = "Beholder BeholdTV 609 FM",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_607FM_MK5] = {
+		/* Andrey Melnikoff <temnota@kmv.ru> */
+		.name           = "Beholder BeholdTV 607 FM",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_609FM_MK5] = {
 		/* Andrey Melnikoff <temnota@kmv.ru> */
-		.name           = "Beholder BeholdTV 607 / BeholdTV 609",
+		.name           = "Beholder BeholdTV 609 FM",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_607RDS_MK3] = {
+		/* Andrey Melnikoff <temnota@kmv.ru> */
+		.name           = "Beholder BeholdTV 607 RDS",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
 		.radio_type     = UNSET,
@@ -4115,6 +4356,90 @@ struct saa7134_board saa7134_boards[] = {
 			.vmux = 3,
 			.amux = TV,
 			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_609RDS_MK3] = {
+		/* Andrey Melnikoff <temnota@kmv.ru> */
+		.name           = "Beholder BeholdTV 609 RDS",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_607RDS_MK5] = {
+		/* Andrey Melnikoff <temnota@kmv.ru> */
+		.name           = "Beholder BeholdTV 607 RDS",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 1,
+			.amux = LINE1,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+		},
+	},
+	[SAA7134_BOARD_BEHOLD_609RDS_MK5] = {
+		/* Andrey Melnikoff <temnota@kmv.ru> */
+		.name           = "Beholder BeholdTV 609 RDS",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 3,
+			.amux = TV,
+			.tv   = 1,
 		},{
 			.name = name_comp1,
 			.vmux = 1,
@@ -4133,6 +4458,7 @@ struct saa7134_board saa7134_boards[] = {
 		/* Igor Kuznetsov <igk@igk.ru> */
 		/* Andrey Melnikoff <temnota@kmv.ru> */
 		/* Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> */
+		/* Alexey Osipov <lion-simba@pridelands.ru> */
 		.name           = "Beholder BeholdTV M6",
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
@@ -4207,10 +4533,10 @@ struct saa7134_board saa7134_boards[] = {
 		/* Igor Kuznetsov <igk@igk.ru> */
 		/* Andrey Melnikoff <temnota@kmv.ru> */
 		/* Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> */
+		/* Alexey Osipov <lion-simba@pridelands.ru> */
 		.name           = "Beholder BeholdTV M6 Extra",
 		.audio_clock    = 0x00187de7,
-		/* FIXME: Must be PHILIPS_FM1216ME_MK5*/
-		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -4465,7 +4791,6 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
-		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs = {{
 			.name   = name_tv,
 			.vmux   = 3,
@@ -4753,6 +5078,44 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x01,
 		},
 	},
+	[SAA7134_BOARD_AVERMEDIA_STUDIO_507UA] = {
+		/* Andy Shevchenko <andy@smile.org.ua> */
+		.name           = "Avermedia AVerTV Studio 507UA",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* Should be MK5 */
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.gpiomask       = 0x03,
+		.inputs         = { {
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.tv   = 1,
+			.gpio = 0x00,
+		}, {
+			.name = name_comp1,
+			.vmux = 3,
+			.amux = LINE1,
+			.gpio = 0x00,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE1,
+			.gpio = 0x00,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE2,
+			.gpio = 0x01,
+		},
+		.mute  = {
+			.name = name_mute,
+			.amux = LINE1,
+			.gpio = 0x00,
+		},
+	},
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -5027,6 +5390,13 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subdevice    = 0xd6ee,
 		.driver_data  = SAA7134_BOARD_AVERMEDIA_CARDBUS,
 	},{
+		/* AVerMedia CardBus */
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
+		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
+		.subdevice    = 0xb7e9,
+		.driver_data  = SAA7134_BOARD_AVERMEDIA_CARDBUS_501,
+	}, {
 		/* TransGear 3000TV */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
@@ -5441,6 +5811,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.driver_data  = SAA7134_BOARD_AVERMEDIA_STUDIO_507,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
+		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
+		.subdevice    = 0xa11b,
+		.driver_data  = SAA7134_BOARD_AVERMEDIA_STUDIO_507UA,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x1043,
 		.subdevice    = 0x4876,
@@ -5647,14 +6023,8 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
 		.subvendor    = 0x0000,
-		.subdevice    = 0x5051,
-		.driver_data  = SAA7134_BOARD_BEHOLD_505FM,
-	},{
-		.vendor       = PCI_VENDOR_ID_PHILIPS,
-		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
-		.subvendor    = 0x0000,
 		.subdevice    = 0x505B,
-		.driver_data  = SAA7134_BOARD_BEHOLD_505FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_505RDS,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
@@ -5666,13 +6036,13 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0000,
 		.subdevice    = 0x5071,
-		.driver_data  = SAA7134_BOARD_BEHOLD_507_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_507RDS_MK3,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x0000,
 		.subdevice    = 0x507B,
-		.driver_data  = SAA7134_BOARD_BEHOLD_507_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_507RDS_MK5,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -5696,49 +6066,49 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
 		.subvendor    = 0x5ace,
 		.subdevice    = 0x6070,
-		.driver_data  = SAA7134_BOARD_BEHOLD_607_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_607FM_MK3,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
 		.subvendor    = 0x5ace,
 		.subdevice    = 0x6071,
-		.driver_data  = SAA7134_BOARD_BEHOLD_607_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_607FM_MK5,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
 		.subvendor    = 0x5ace,
 		.subdevice    = 0x6072,
-		.driver_data  = SAA7134_BOARD_BEHOLD_607_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_607RDS_MK3,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
 		.subvendor    = 0x5ace,
 		.subdevice    = 0x6073,
-		.driver_data  = SAA7134_BOARD_BEHOLD_607_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_607RDS_MK5,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x5ace,
 		.subdevice    = 0x6090,
-		.driver_data  = SAA7134_BOARD_BEHOLD_607_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_609FM_MK3,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x5ace,
 		.subdevice    = 0x6091,
-		.driver_data  = SAA7134_BOARD_BEHOLD_607_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_609FM_MK5,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x5ace,
 		.subdevice    = 0x6092,
-		.driver_data  = SAA7134_BOARD_BEHOLD_607_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_609RDS_MK3,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x5ace,
 		.subdevice    = 0x6093,
-		.driver_data  = SAA7134_BOARD_BEHOLD_607_9FM,
+		.driver_data  = SAA7134_BOARD_BEHOLD_609RDS_MK5,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -5832,6 +6202,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 	}, {
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
+		.subdevice    = 0xf736,
+		.driver_data  = SAA7134_BOARD_AVERMEDIA_M103,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x1043,
 		.subdevice    = 0x4878, /* REV:1.02G */
 		.driver_data  = SAA7134_BOARD_ASUSTeK_TIGER_3IN1,
@@ -6114,7 +6490,6 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_VIDEOMATE_DVBT_300:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_200:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
-	case SAA7134_BOARD_VIDEOMATE_T750:
 	case SAA7134_BOARD_MANLI_MTV001:
 	case SAA7134_BOARD_MANLI_MTV002:
 	case SAA7134_BOARD_BEHOLD_409FM:
@@ -6142,7 +6517,10 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_BEHOLD_407FM:
 	case SAA7134_BOARD_BEHOLD_409:
 	case SAA7134_BOARD_BEHOLD_505FM:
+	case SAA7134_BOARD_BEHOLD_505RDS:
 	case SAA7134_BOARD_BEHOLD_507_9FM:
+	case SAA7134_BOARD_BEHOLD_507RDS_MK3:
+	case SAA7134_BOARD_BEHOLD_507RDS_MK5:
 	case SAA7134_BOARD_GENIUS_TVGO_A11MCE:
 	case SAA7134_BOARD_REAL_ANGEL_220:
 	case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
@@ -6196,6 +6574,16 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
 		msleep(10);
 		break;
+	case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
+		/* power-down tuner chip */
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x08400000, 0x08400000);
+		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08400000, 0);
+		msleep(10);
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x08400000, 0x08400000);
+		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08400000, 0x08400000);
+		msleep(10);
+		dev->has_remote = SAA7134_REMOTE_I2C;
+		break;
 	case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
 		saa7134_set_gpio(dev, 23, 0);
 		msleep(10);
@@ -6253,7 +6641,14 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_UPMOST_PURPLE_TV:
 	case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1110:
-	case SAA7134_BOARD_BEHOLD_607_9FM:
+	case SAA7134_BOARD_BEHOLD_607FM_MK3:
+	case SAA7134_BOARD_BEHOLD_607FM_MK5:
+	case SAA7134_BOARD_BEHOLD_609FM_MK3:
+	case SAA7134_BOARD_BEHOLD_609FM_MK5:
+	case SAA7134_BOARD_BEHOLD_607RDS_MK3:
+	case SAA7134_BOARD_BEHOLD_607RDS_MK5:
+	case SAA7134_BOARD_BEHOLD_609RDS_MK3:
+	case SAA7134_BOARD_BEHOLD_609RDS_MK5:
 	case SAA7134_BOARD_BEHOLD_M6:
 	case SAA7134_BOARD_BEHOLD_M63:
 	case SAA7134_BOARD_BEHOLD_M6_EXTRA:
@@ -6635,6 +7030,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 
 	switch (dev->board) {
 	case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
+	case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
 	{
 		struct v4l2_priv_tun_config tea5767_cfg;
 		struct tea5767_ctrl ctl;
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 2def6fec814..94a023a14bb 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -331,6 +331,10 @@ void saa7134_buffer_next(struct saa7134_dev *dev,
 		dprintk("buffer_next %p\n",NULL);
 		saa7134_set_dmabits(dev);
 		del_timer(&q->timeout);
+
+		if (card_has_mpeg(dev))
+			if (dev->ts_started)
+				saa7134_ts_stop(dev);
 	}
 }
 
@@ -416,6 +420,19 @@ int saa7134_set_dmabits(struct saa7134_dev *dev)
 		ctrl |= SAA7134_MAIN_CTRL_TE5;
 		irq  |= SAA7134_IRQ1_INTE_RA2_1 |
 			SAA7134_IRQ1_INTE_RA2_0;
+
+		/* dma: setup channel 5 (= TS) */
+
+		saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
+		saa_writeb(SAA7134_TS_DMA1,
+			((dev->ts.nr_packets - 1) >> 8) & 0xff);
+		/* TSNOPIT=0, TSCOLAP=0 */
+		saa_writeb(SAA7134_TS_DMA2,
+			(((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
+		saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
+		saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
+						  SAA7134_RS_CONTROL_ME |
+						  (dev->ts.pt_ts.dma >> 12));
 	}
 
 	/* set task conditions + field handling */
@@ -775,7 +792,6 @@ static struct video_device *vdev_init(struct saa7134_dev *dev,
 	if (NULL == vfd)
 		return NULL;
 	*vfd = *template;
-	vfd->minor   = -1;
 	vfd->v4l2_dev  = &dev->v4l2_dev;
 	vfd->release = video_device_release;
 	vfd->debug   = video_debug;
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 4eff1ca8593..31930f26ffc 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -48,6 +48,7 @@
 #include "isl6405.h"
 #include "lnbp21.h"
 #include "tuner-simple.h"
+#include "tda10048.h"
 #include "tda18271.h"
 #include "lgdt3305.h"
 #include "tda8290.h"
@@ -978,6 +979,18 @@ static struct lgdt3305_config hcw_lgdt3305_config = {
 	.vsb_if_khz         = 3250,
 };
 
+static struct tda10048_config hcw_tda10048_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+	.disable_gate_access = 1,
+};
+
 static struct tda18271_std_map hauppauge_tda18271_std_map = {
 	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,
 		      .if_lvl = 1, .rfagc_top = 0x58, },
@@ -1106,6 +1119,19 @@ static int dvb_init(struct saa7134_dev *dev)
 					 &tda827x_cfg_2) < 0)
 			goto dettach_frontend;
 		break;
+	case SAA7134_BOARD_HAUPPAUGE_HVR1110R3:
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
+					       &hcw_tda10048_config,
+					       &dev->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda829x_attach, fe0->dvb.frontend,
+				   &dev->i2c_adap, 0x4b,
+				   &tda829x_no_probe);
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_adap,
+				   &hcw_tda18271_config);
+		}
+		break;
 	case SAA7134_BOARD_PHILIPS_TIGER:
 		if (configure_tda827x_fe(dev, &philips_tiger_config,
 					 &tda827x_cfg_0) < 0)
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 9db3472667e..add1757f893 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -255,6 +255,16 @@ static int empress_s_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
+static int empress_try_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct saa7134_dev *dev = file->private_data;
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
+
+	return 0;
+}
 
 static int empress_reqbufs(struct file *file, void *priv,
 					struct v4l2_requestbuffers *p)
@@ -450,6 +460,7 @@ static const struct v4l2_file_operations ts_fops =
 static const struct v4l2_ioctl_ops ts_ioctl_ops = {
 	.vidioc_querycap		= empress_querycap,
 	.vidioc_enum_fmt_vid_cap	= empress_enum_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap		= empress_try_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap		= empress_s_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap		= empress_g_fmt_vid_cap,
 	.vidioc_reqbufs			= empress_reqbufs,
@@ -491,11 +502,8 @@ static void empress_signal_update(struct work_struct *work)
 
 	if (dev->nosignal) {
 		dprintk("no video signal\n");
-		ts_reset_encoder(dev);
 	} else {
 		dprintk("video signal acquired\n");
-		if (atomic_read(&dev->empress_users))
-			ts_init_encoder(dev);
 	}
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
index f3e285aa2fb..8096dace5f6 100644
--- a/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -259,7 +259,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
 				/* workaround for a saa7134 i2c bug
 				 * needed to talk to the mt352 demux
 				 * thanks to pinnacle for the hint */
-				int quirk = 0xfd;
+				int quirk = 0xfe;
 				d1printk(" [%02x quirk]",quirk);
 				i2c_send_byte(dev,START,quirk);
 				i2c_recv_byte(dev);
@@ -321,33 +321,6 @@ static u32 functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_SMBUS_EMUL;
 }
 
-static int attach_inform(struct i2c_client *client)
-{
-	struct saa7134_dev *dev = client->adapter->algo_data;
-
-	d1printk( "%s i2c attach [addr=0x%x,client=%s]\n",
-		client->driver->driver.name, client->addr, client->name);
-
-	/* Am I an i2c remote control? */
-
-	switch (client->addr) {
-		case 0x7a:
-		case 0x47:
-		case 0x71:
-		case 0x2d:
-		case 0x30:
-		{
-			struct IR_i2c *ir = i2c_get_clientdata(client);
-			d1printk("%s i2c IR detected (%s).\n",
-				 client->driver->driver.name, ir->phys);
-			saa7134_set_i2c_ir(dev,ir);
-			break;
-		}
-	}
-
-	return 0;
-}
-
 static struct i2c_algorithm saa7134_algo = {
 	.master_xfer   = saa7134_i2c_xfer,
 	.functionality = functionality,
@@ -358,7 +331,6 @@ static struct i2c_adapter saa7134_adap_template = {
 	.name          = "saa7134",
 	.id            = I2C_HW_SAA7134,
 	.algo          = &saa7134_algo,
-	.client_register = attach_inform,
 };
 
 static struct i2c_client saa7134_client_template = {
@@ -433,6 +405,9 @@ int saa7134_i2c_register(struct saa7134_dev *dev)
 	saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata));
 	if (i2c_scan)
 		do_i2c_scan(dev->name,&dev->i2c_client);
+
+	/* Instantiate the IR receiver device, if present */
+	saa7134_probe_i2c_ir(dev);
 	return 0;
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 8a106d36e72..6e219c2db84 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -60,7 +60,7 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
 #define dprintk(fmt, arg...)	if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
-	printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg)
+	printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg)
 
 /* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */
 static int saa7134_rc5_irq(struct saa7134_dev *dev);
@@ -134,10 +134,10 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 	int gpio;
 
 	/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
-	struct saa7134_dev *dev = ir->c.adapter->algo_data;
+	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 	if (dev == NULL) {
 		dprintk("get_key_msi_tvanywhere_plus: "
-			"gir->c.adapter->algo_data is NULL!\n");
+			"gir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 
@@ -156,7 +156,7 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 
 	/* GPIO says there is a button press. Get it. */
 
-	if (1 != i2c_master_recv(&ir->c, &b, 1)) {
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -179,7 +179,7 @@ static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char b;
 
 	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c,&b,1)) {
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -202,7 +202,7 @@ static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char buf[5], cod4, code3, code4;
 
 	/* poll IR chip */
-	if (5 != i2c_master_recv(&ir->c,buf,5))
+	if (5 != i2c_master_recv(ir->c, buf, 5))
 		return -EIO;
 
 	cod4	= buf[4];
@@ -224,7 +224,7 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	unsigned char data[12];
 	u32 gpio;
 
-	struct saa7134_dev *dev = ir->c.adapter->algo_data;
+	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 
 	/* rising SAA7134_GPIO_GPRESCAN reads the status */
 	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
@@ -235,9 +235,9 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	if (0x400000 & ~gpio)
 		return 0; /* No button press */
 
-	ir->c.addr = 0x5a >> 1;
+	ir->c->addr = 0x5a >> 1;
 
-	if (12 != i2c_master_recv(&ir->c, data, 12)) {
+	if (12 != i2c_master_recv(ir->c, data, 12)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -267,7 +267,7 @@ static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw,
 	unsigned int start = 0,parity = 0,code = 0;
 
 	/* poll IR chip */
-	if (4 != i2c_master_recv(&ir->c, b, 4)) {
+	if (4 != i2c_master_recv(ir->c, b, 4)) {
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
@@ -447,6 +447,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
 	case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
 	case SAA7134_BOARD_AVERMEDIA_STUDIO_507:
+	case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA:
 	case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
 	case SAA7134_BOARD_AVERMEDIA_M102:
 	case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS:
@@ -506,7 +507,10 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_BEHOLD_407FM:
 	case SAA7134_BOARD_BEHOLD_409:
 	case SAA7134_BOARD_BEHOLD_505FM:
+	case SAA7134_BOARD_BEHOLD_505RDS:
 	case SAA7134_BOARD_BEHOLD_507_9FM:
+	case SAA7134_BOARD_BEHOLD_507RDS_MK3:
+	case SAA7134_BOARD_BEHOLD_507RDS_MK5:
 		ir_codes     = ir_codes_manli;
 		mask_keycode = 0x003f00;
 		mask_keyup   = 0x004000;
@@ -678,55 +682,101 @@ void saa7134_input_fini(struct saa7134_dev *dev)
 	dev->remote = NULL;
 }
 
-void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir)
+void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 {
+	struct i2c_board_info info;
+	struct IR_i2c_init_data init_data;
+	const unsigned short addr_list[] = {
+		0x7a, 0x47, 0x71, 0x2d,
+		I2C_CLIENT_END
+	};
+
+	struct i2c_msg msg_msi = {
+		.addr = 0x50,
+		.flags = I2C_M_RD,
+		.len = 0,
+		.buf = NULL,
+	};
+
+	int rc;
+
 	if (disable_ir) {
-		dprintk("Found supported i2c remote, but IR has been disabled\n");
-		ir->get_key=NULL;
+		dprintk("IR has been disabled, not probing for i2c remote\n");
 		return;
 	}
 
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
+	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+
 	switch (dev->board) {
 	case SAA7134_BOARD_PINNACLE_PCTV_110i:
 	case SAA7134_BOARD_PINNACLE_PCTV_310i:
-		snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV");
+		init_data.name = "Pinnacle PCTV";
 		if (pinnacle_remote == 0) {
-			ir->get_key   = get_key_pinnacle_color;
-			ir->ir_codes = ir_codes_pinnacle_color;
+			init_data.get_key = get_key_pinnacle_color;
+			init_data.ir_codes = ir_codes_pinnacle_color;
 		} else {
-			ir->get_key   = get_key_pinnacle_grey;
-			ir->ir_codes = ir_codes_pinnacle_grey;
+			init_data.get_key = get_key_pinnacle_grey;
+			init_data.ir_codes = ir_codes_pinnacle_grey;
 		}
 		break;
 	case SAA7134_BOARD_UPMOST_PURPLE_TV:
-		snprintf(ir->c.name, sizeof(ir->c.name), "Purple TV");
-		ir->get_key   = get_key_purpletv;
-		ir->ir_codes  = ir_codes_purpletv;
+		init_data.name = "Purple TV";
+		init_data.get_key = get_key_purpletv;
+		init_data.ir_codes = ir_codes_purpletv;
 		break;
 	case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS:
-		snprintf(ir->c.name, sizeof(ir->c.name), "MSI TV@nywhere Plus");
-		ir->get_key  = get_key_msi_tvanywhere_plus;
-		ir->ir_codes = ir_codes_msi_tvanywhere_plus;
+		init_data.name = "MSI TV@nywhere Plus";
+		init_data.get_key = get_key_msi_tvanywhere_plus;
+		init_data.ir_codes = ir_codes_msi_tvanywhere_plus;
+		info.addr = 0x30;
+		/* MSI TV@nywhere Plus controller doesn't seem to
+		   respond to probes unless we read something from
+		   an existing device. Weird...
+		   REVISIT: might no longer be needed */
+		rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
+		dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n",
+			msg_msi.addr, dev->i2c_adap.name,
+			(1 == rc) ? "yes" : "no");
 		break;
 	case SAA7134_BOARD_HAUPPAUGE_HVR1110:
-		snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110");
-		ir->get_key   = get_key_hvr1110;
-		ir->ir_codes  = ir_codes_hauppauge_new;
-		break;
-	case SAA7134_BOARD_BEHOLD_607_9FM:
+		init_data.name = "HVR 1110";
+		init_data.get_key = get_key_hvr1110;
+		init_data.ir_codes = ir_codes_hauppauge_new;
+		break;
+	case SAA7134_BOARD_BEHOLD_607FM_MK3:
+	case SAA7134_BOARD_BEHOLD_607FM_MK5:
+	case SAA7134_BOARD_BEHOLD_609FM_MK3:
+	case SAA7134_BOARD_BEHOLD_609FM_MK5:
+	case SAA7134_BOARD_BEHOLD_607RDS_MK3:
+	case SAA7134_BOARD_BEHOLD_607RDS_MK5:
+	case SAA7134_BOARD_BEHOLD_609RDS_MK3:
+	case SAA7134_BOARD_BEHOLD_609RDS_MK5:
 	case SAA7134_BOARD_BEHOLD_M6:
 	case SAA7134_BOARD_BEHOLD_M63:
 	case SAA7134_BOARD_BEHOLD_M6_EXTRA:
 	case SAA7134_BOARD_BEHOLD_H6:
-		snprintf(ir->c.name, sizeof(ir->c.name), "BeholdTV");
-		ir->get_key   = get_key_beholdm6xx;
-		ir->ir_codes  = ir_codes_behold;
+		init_data.name = "BeholdTV";
+		init_data.get_key = get_key_beholdm6xx;
+		init_data.ir_codes = ir_codes_behold;
 		break;
-	default:
-		dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board);
+	case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
+	case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+		info.addr = 0x40;
 		break;
 	}
 
+	if (init_data.name)
+		info.platform_data = &init_data;
+	/* No need to probe if address is known */
+	if (info.addr) {
+		i2c_new_device(&dev->i2c_adap, &info);
+		return;
+	}
+
+	/* Address not known, fallback to probing */
+	i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
 }
 
 static int saa7134_rc5_irq(struct saa7134_dev *dev)
diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c
index cc8b923afbc..3fa652279ac 100644
--- a/drivers/media/video/saa7134/saa7134-ts.c
+++ b/drivers/media/video/saa7134/saa7134-ts.c
@@ -65,35 +65,10 @@ static int buffer_activate(struct saa7134_dev *dev,
 	/* start DMA */
 	saa7134_set_dmabits(dev);
 
-	mod_timer(&dev->ts_q.timeout, jiffies+BUFFER_TIMEOUT);
-
-	if (dev->ts_state == SAA7134_TS_BUFF_DONE) {
-		/* Clear TS cache */
-		dev->buff_cnt = 0;
-		saa_writeb(SAA7134_TS_SERIAL1, 0x00);
-		saa_writeb(SAA7134_TS_SERIAL1, 0x03);
-		saa_writeb(SAA7134_TS_SERIAL1, 0x00);
-		saa_writeb(SAA7134_TS_SERIAL1, 0x01);
-
-		/* TS clock non-inverted */
-		saa_writeb(SAA7134_TS_SERIAL1, 0x00);
-
-		/* Start TS stream */
-		switch (saa7134_boards[dev->board].ts_type) {
-		case SAA7134_MPEG_TS_PARALLEL:
-			saa_writeb(SAA7134_TS_SERIAL0, 0x40);
-			saa_writeb(SAA7134_TS_PARALLEL, 0xec);
-			break;
-		case SAA7134_MPEG_TS_SERIAL:
-			saa_writeb(SAA7134_TS_SERIAL0, 0xd8);
-			saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
-			saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc);
-			saa_writeb(SAA7134_TS_SERIAL1, 0x02);
-			break;
-		}
+	mod_timer(&dev->ts_q.timeout, jiffies+TS_BUFFER_TIMEOUT);
 
-		dev->ts_state = SAA7134_TS_STARTED;
-	}
+	if (!dev->ts_started)
+		saa7134_ts_start(dev);
 
 	return 0;
 }
@@ -104,7 +79,6 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	struct saa7134_dev *dev = q->priv_data;
 	struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb);
 	unsigned int lines, llength, size;
-	u32 control;
 	int err;
 
 	dprintk("buffer_prepare [%p,%s]\n",buf,v4l2_field_names[field]);
@@ -121,8 +95,11 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	}
 
 	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+
 		struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
 
+		dprintk("buffer_prepare: needs_init\n");
+
 		buf->vb.width  = llength;
 		buf->vb.height = lines;
 		buf->vb.size   = size;
@@ -139,23 +116,6 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 			goto oops;
 	}
 
-	dev->buff_cnt++;
-
-	if (dev->buff_cnt == dev->ts.nr_bufs) {
-		dev->ts_state = SAA7134_TS_BUFF_DONE;
-		/* dma: setup channel 5 (= TS) */
-		control = SAA7134_RS_CONTROL_BURST_16 |
-			SAA7134_RS_CONTROL_ME |
-			(buf->pt->dma >> 12);
-
-		saa_writeb(SAA7134_TS_DMA0, (lines - 1) & 0xff);
-		saa_writeb(SAA7134_TS_DMA1, ((lines - 1) >> 8) & 0xff);
-		/* TSNOPIT=0, TSCOLAP=0 */
-		saa_writeb(SAA7134_TS_DMA2, (((lines - 1) >> 16) & 0x3f) | 0x00);
-		saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
-		saa_writel(SAA7134_RS_CONTROL(5), control);
-	}
-
 	buf->vb.state = VIDEOBUF_PREPARED;
 	buf->activate = buffer_activate;
 	buf->vb.field = field;
@@ -175,8 +135,7 @@ buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
 	if (0 == *count)
 		*count = dev->ts.nr_bufs;
 	*count = saa7134_buffer_count(*size,*count);
-	dev->buff_cnt = 0;
-	dev->ts_state = SAA7134_TS_STOPPED;
+
 	return 0;
 }
 
@@ -193,11 +152,9 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 	struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb);
 	struct saa7134_dev *dev = q->priv_data;
 
-	if (dev->ts_state == SAA7134_TS_STARTED) {
-		/* Stop TS transport */
-		saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
-		dev->ts_state = SAA7134_TS_STOPPED;
-	}
+	if (dev->ts_started)
+		saa7134_ts_stop(dev);
+
 	saa7134_dma_free(q,buf);
 }
 
@@ -214,7 +171,7 @@ EXPORT_SYMBOL_GPL(saa7134_ts_qops);
 
 static unsigned int tsbufs = 8;
 module_param(tsbufs, int, 0444);
-MODULE_PARM_DESC(tsbufs,"number of ts buffers, range 2-32");
+MODULE_PARM_DESC(tsbufs, "number of ts buffers for read/write IO, range 2-32");
 
 static unsigned int ts_nr_packets = 64;
 module_param(ts_nr_packets, int, 0444);
@@ -256,6 +213,7 @@ int saa7134_ts_init1(struct saa7134_dev *dev)
 	dev->ts_q.timeout.data     = (unsigned long)(&dev->ts_q);
 	dev->ts_q.dev              = dev;
 	dev->ts_q.need_two         = 1;
+	dev->ts_started            = 0;
 	saa7134_pgtable_alloc(dev->pci,&dev->ts.pt_ts);
 
 	/* init TS hw */
@@ -264,13 +222,67 @@ int saa7134_ts_init1(struct saa7134_dev *dev)
 	return 0;
 }
 
+/* Function for stop TS */
+int saa7134_ts_stop(struct saa7134_dev *dev)
+{
+	dprintk("TS stop\n");
+
+	BUG_ON(!dev->ts_started);
+
+	/* Stop TS stream */
+	switch (saa7134_boards[dev->board].ts_type) {
+	case SAA7134_MPEG_TS_PARALLEL:
+		saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
+		dev->ts_started = 0;
+		break;
+	case SAA7134_MPEG_TS_SERIAL:
+		saa_writeb(SAA7134_TS_SERIAL0, 0x40);
+		dev->ts_started = 0;
+		break;
+	}
+	return 0;
+}
+
+/* Function for start TS */
+int saa7134_ts_start(struct saa7134_dev *dev)
+{
+	dprintk("TS start\n");
+
+	BUG_ON(dev->ts_started);
+
+	saa_writeb(SAA7134_TS_SERIAL1, 0x00);
+	saa_writeb(SAA7134_TS_SERIAL1, 0x03);
+	saa_writeb(SAA7134_TS_SERIAL1, 0x00);
+	saa_writeb(SAA7134_TS_SERIAL1, 0x01);
+
+	/* TS clock non-inverted */
+	saa_writeb(SAA7134_TS_SERIAL1, 0x00);
+
+	/* Start TS stream */
+	switch (saa7134_boards[dev->board].ts_type) {
+	case SAA7134_MPEG_TS_PARALLEL:
+		saa_writeb(SAA7134_TS_SERIAL0, 0x40);
+		saa_writeb(SAA7134_TS_PARALLEL, 0xec);
+		break;
+	case SAA7134_MPEG_TS_SERIAL:
+		saa_writeb(SAA7134_TS_SERIAL0, 0xd8);
+		saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
+		saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc);
+		saa_writeb(SAA7134_TS_SERIAL1, 0x02);
+		break;
+	}
+
+	dev->ts_started = 1;
+
+	return 0;
+}
+
 int saa7134_ts_fini(struct saa7134_dev *dev)
 {
 	saa7134_pgtable_free(dev->pci,&dev->ts.pt_ts);
 	return 0;
 }
 
-
 void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status)
 {
 	enum v4l2_field field;
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index 493cad94146..e305c1674ce 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1057,6 +1057,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 		buf->vb.field  = field;
 		buf->fmt       = fh->fmt;
 		buf->pt        = &fh->pt_cap;
+		dev->video_q.curr = NULL;
 
 		err = videobuf_iolock(q,&buf->vb,&dev->ovbuf);
 		if (err)
@@ -1423,11 +1424,13 @@ video_poll(struct file *file, struct poll_table_struct *wait)
 {
 	struct saa7134_fh *fh = file->private_data;
 	struct videobuf_buffer *buf = NULL;
+	unsigned int rc = 0;
 
 	if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type)
 		return videobuf_poll_stream(file, &fh->vbi, wait);
 
 	if (res_check(fh,RESOURCE_VIDEO)) {
+		mutex_lock(&fh->cap.vb_lock);
 		if (!list_empty(&fh->cap.stream))
 			buf = list_entry(fh->cap.stream.next, struct videobuf_buffer, stream);
 	} else {
@@ -1446,13 +1449,14 @@ video_poll(struct file *file, struct poll_table_struct *wait)
 	}
 
 	if (!buf)
-		return POLLERR;
+		goto err;
 
 	poll_wait(file, &buf->done, wait);
 	if (buf->state == VIDEOBUF_DONE ||
 	    buf->state == VIDEOBUF_ERROR)
-		return POLLIN|POLLRDNORM;
-	return 0;
+		rc = POLLIN|POLLRDNORM;
+	mutex_unlock(&fh->cap.vb_lock);
+	return rc;
 
 err:
 	mutex_unlock(&fh->cap.vb_lock);
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 0cbaf90d487..82268848f26 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -252,7 +252,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_BEHOLD_505FM	126
 #define SAA7134_BOARD_BEHOLD_507_9FM	127
 #define SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM 128
-#define SAA7134_BOARD_BEHOLD_607_9FM	129
+#define SAA7134_BOARD_BEHOLD_607FM_MK3	129
 #define SAA7134_BOARD_BEHOLD_M6		130
 #define SAA7134_BOARD_TWINHAN_DTV_DVB_3056 131
 #define SAA7134_BOARD_GENIUS_TVGO_A11MCE   132
@@ -280,6 +280,18 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154
 #define SAA7134_BOARD_HAUPPAUGE_HVR1120     155
 #define SAA7134_BOARD_HAUPPAUGE_HVR1110R3   156
+#define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157
+#define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158
+#define SAA7134_BOARD_BEHOLD_505RDS         159
+#define SAA7134_BOARD_BEHOLD_507RDS_MK3     160
+#define SAA7134_BOARD_BEHOLD_507RDS_MK5     161
+#define SAA7134_BOARD_BEHOLD_607FM_MK5      162
+#define SAA7134_BOARD_BEHOLD_609FM_MK3      163
+#define SAA7134_BOARD_BEHOLD_609FM_MK5      164
+#define SAA7134_BOARD_BEHOLD_607RDS_MK3     165
+#define SAA7134_BOARD_BEHOLD_607RDS_MK5     166
+#define SAA7134_BOARD_BEHOLD_609RDS_MK3     167
+#define SAA7134_BOARD_BEHOLD_609RDS_MK5     168
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
@@ -364,6 +376,7 @@ struct saa7134_board {
 #define INTERLACE_OFF          2
 
 #define BUFFER_TIMEOUT     msecs_to_jiffies(500)  /* 0.5 seconds */
+#define TS_BUFFER_TIMEOUT  msecs_to_jiffies(1000)  /* 1 second */
 
 struct saa7134_dev;
 struct saa7134_dma;
@@ -480,12 +493,6 @@ struct saa7134_mpeg_ops {
 	void                       (*signal_change)(struct saa7134_dev *dev);
 };
 
-enum saa7134_ts_status {
-	SAA7134_TS_STOPPED,
-	SAA7134_TS_BUFF_DONE,
-	SAA7134_TS_STARTED,
-};
-
 /* global device status */
 struct saa7134_dev {
 	struct list_head           devlist;
@@ -580,8 +587,7 @@ struct saa7134_dev {
 	/* SAA7134_MPEG_* */
 	struct saa7134_ts          ts;
 	struct saa7134_dmaqueue    ts_q;
-	enum saa7134_ts_status 	   ts_state;
-	unsigned int 		   buff_cnt;
+	int                        ts_started;
 	struct saa7134_mpeg_ops    *mops;
 
 	/* SAA7134_MPEG_EMPRESS only */
@@ -739,6 +745,9 @@ void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops);
 
 int saa7134_ts_init_hw(struct saa7134_dev *dev);
 
+int saa7134_ts_start(struct saa7134_dev *dev);
+int saa7134_ts_stop(struct saa7134_dev *dev);
+
 /* ----------------------------------------------------------- */
 /* saa7134-vbi.c                                               */
 
@@ -786,7 +795,7 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status);
 int  saa7134_input_init1(struct saa7134_dev *dev);
 void saa7134_input_fini(struct saa7134_dev *dev);
 void saa7134_input_irq(struct saa7134_dev *dev);
-void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir);
+void saa7134_probe_i2c_ir(struct saa7134_dev *dev);
 void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir);
 void saa7134_ir_stop(struct saa7134_dev *dev);
 
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index 5990ab38a12..c8f05297d0f 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -38,7 +38,7 @@ static const char version[] = "0.24";
 static int flickerless;
 static int video_nr = -1;
 
-static struct usb_device_id device_table [] = {
+static struct usb_device_id device_table[] = {
 	{ USB_DEVICE(0x03e8, 0x0004) },/* Endpoints/Aox SE401 */
 	{ USB_DEVICE(0x0471, 0x030b) },/* Philips PCVC665K */
 	{ USB_DEVICE(0x047d, 0x5001) },/* Kensington 67014 */
@@ -53,7 +53,8 @@ MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>");
 MODULE_DESCRIPTION("SE401 USB Camera Driver");
 MODULE_LICENSE("GPL");
 module_param(flickerless, int, 0);
-MODULE_PARM_DESC(flickerless, "Net frequency to adjust exposure time to (0/50/60)");
+MODULE_PARM_DESC(flickerless,
+		"Net frequency to adjust exposure time to (0/50/60)");
 module_param(video_nr, int, 0);
 
 static struct usb_driver se401_driver;
@@ -78,8 +79,8 @@ static void *rvmalloc(unsigned long size)
 	adr = (unsigned long) mem;
 	while (size > 0) {
 		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
+		adr +=  PAGE_SIZE;
+		size -=  PAGE_SIZE;
 	}
 
 	return mem;
@@ -95,8 +96,8 @@ static void rvfree(void *mem, unsigned long size)
 	adr = (unsigned long) mem;
 	while ((long) size > 0) {
 		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
+		adr +=  PAGE_SIZE;
+		size -=  PAGE_SIZE;
 	}
 	vfree(mem);
 }
@@ -112,7 +113,7 @@ static void rvfree(void *mem, unsigned long size)
 static int se401_sndctrl(int set, struct usb_se401 *se401, unsigned short req,
 			 unsigned short value, unsigned char *cp, int size)
 {
-	return usb_control_msg (
+	return usb_control_msg(
 		se401->dev,
 		set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0),
 		req,
@@ -132,7 +133,7 @@ static int se401_set_feature(struct usb_se401 *se401, unsigned short selector,
 	   and the param in index, but in the logs of the windows driver they do
 	   this the other way around...
 	 */
-	return usb_control_msg (
+	return usb_control_msg(
 		se401->dev,
 		usb_sndctrlpipe(se401->dev, 0),
 		SE401_REQ_SET_EXT_FEATURE,
@@ -152,7 +153,7 @@ static unsigned short se401_get_feature(struct usb_se401 *se401,
 	   wrong here to....
 	 */
 	unsigned char cp[2];
-	usb_control_msg (
+	usb_control_msg(
 		se401->dev,
 		usb_rcvctrlpipe(se401->dev, 0),
 		SE401_REQ_GET_EXT_FEATURE,
@@ -175,46 +176,51 @@ static unsigned short se401_get_feature(struct usb_se401 *se401,
 
 static int se401_send_pict(struct usb_se401 *se401)
 {
-	se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);/* integration time low */
-	se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);/* integration time mid */
-	se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);/* integration time mid */
-	se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);/* reset level value */
-	se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);/* red color gain */
-	se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);/* green color gain */
-	se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);/* blue color gain */
+	/* integration time low */
+	se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);
+	/* integration time mid */
+	se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);
+	/* integration time mid */
+	se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);
+	/* reset level value */
+	se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);
+	/* red color gain */
+	se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);
+	/* green color gain */
+	se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);
+	/* blue color gain */
+	se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);
 
 	return 0;
 }
 
 static void se401_set_exposure(struct usb_se401 *se401, int brightness)
 {
-	int integration=brightness<<5;
-
-	if (flickerless==50) {
-		integration=integration-integration%106667;
-	}
-	if (flickerless==60) {
-		integration=integration-integration%88889;
-	}
-	se401->brightness=integration>>5;
-	se401->expose_h=(integration>>16)&0xff;
-	se401->expose_m=(integration>>8)&0xff;
-	se401->expose_l=integration&0xff;
+	int integration = brightness << 5;
+
+	if (flickerless == 50)
+		integration = integration-integration % 106667;
+	if (flickerless == 60)
+		integration = integration-integration % 88889;
+	se401->brightness = integration >> 5;
+	se401->expose_h = (integration >> 16) & 0xff;
+	se401->expose_m = (integration >> 8) & 0xff;
+	se401->expose_l = integration & 0xff;
 }
 
 static int se401_get_pict(struct usb_se401 *se401, struct video_picture *p)
 {
-	p->brightness=se401->brightness;
-	if (se401->enhance) {
-		p->whiteness=32768;
-	} else {
-		p->whiteness=0;
-	}
-	p->colour=65535;
-	p->contrast=65535;
-	p->hue=se401->rgain<<10;
-	p->palette=se401->palette;
-	p->depth=3; /* rgb24 */
+	p->brightness = se401->brightness;
+	if (se401->enhance)
+		p->whiteness = 32768;
+	else
+		p->whiteness = 0;
+
+	p->colour = 65535;
+	p->contrast = 65535;
+	p->hue = se401->rgain << 10;
+	p->palette = se401->palette;
+	p->depth = 3; /* rgb24 */
 	return 0;
 }
 
@@ -223,20 +229,19 @@ static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p)
 {
 	if (p->palette != VIDEO_PALETTE_RGB24)
 		return 1;
-	se401->palette=p->palette;
-	if (p->hue!=se401->hue) {
-		se401->rgain= p->hue>>10;
-		se401->bgain= 0x40-(p->hue>>10);
-		se401->hue=p->hue;
+	se401->palette = p->palette;
+	if (p->hue != se401->hue) {
+		se401->rgain =  p->hue >> 10;
+		se401->bgain =  0x40-(p->hue >> 10);
+		se401->hue = p->hue;
 	}
-	if (p->brightness!=se401->brightness) {
+	if (p->brightness != se401->brightness)
 		se401_set_exposure(se401, p->brightness);
-	}
-	if (p->whiteness>=32768) {
-		se401->enhance=1;
-	} else {
-		se401->enhance=0;
-	}
+
+	if (p->whiteness >= 32768)
+		se401->enhance = 1;
+	else
+		se401->enhance = 0;
 	se401_send_pict(se401);
 	se401_send_pict(se401);
 	return 0;
@@ -249,7 +254,7 @@ static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p)
 static void se401_auto_resetlevel(struct usb_se401 *se401)
 {
 	unsigned int ahrc, alrc;
-	int oldreset=se401->resetlevel;
+	int oldreset = se401->resetlevel;
 
 	/* For some reason this normally read-only register doesn't get reset
 	   to zero after reading them just once...
@@ -258,24 +263,24 @@ static void se401_auto_resetlevel(struct usb_se401 *se401)
 	se401_get_feature(se401, HV7131_REG_HIREFNOL);
 	se401_get_feature(se401, HV7131_REG_LOREFNOH);
 	se401_get_feature(se401, HV7131_REG_LOREFNOL);
-	ahrc=256*se401_get_feature(se401, HV7131_REG_HIREFNOH) +
+	ahrc = 256*se401_get_feature(se401, HV7131_REG_HIREFNOH) +
 	    se401_get_feature(se401, HV7131_REG_HIREFNOL);
-	alrc=256*se401_get_feature(se401, HV7131_REG_LOREFNOH) +
+	alrc = 256*se401_get_feature(se401, HV7131_REG_LOREFNOH) +
 	    se401_get_feature(se401, HV7131_REG_LOREFNOL);
 
 	/* Not an exact science, but it seems to work pretty well... */
 	if (alrc > 10) {
-		while (alrc>=10 && se401->resetlevel < 63) {
+		while (alrc >= 10 && se401->resetlevel < 63) {
 			se401->resetlevel++;
-			alrc /=2;
+			alrc /= 2;
 		}
 	} else if (ahrc > 20) {
-		while (ahrc>=20 && se401->resetlevel > 0) {
+		while (ahrc >= 20 && se401->resetlevel > 0) {
 			se401->resetlevel--;
-			ahrc /=2;
+			ahrc /= 2;
 		}
 	}
-	if (se401->resetlevel!=oldreset)
+	if (se401->resetlevel != oldreset)
 		se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);
 
 	return;
@@ -300,21 +305,22 @@ static void se401_button_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
+		dbg("%s - urb shutting down with status: %d",
+							__func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
+		dbg("%s - nonzero urb status received: %d",
+							__func__, urb->status);
 		goto exit;
 	}
 
-	if (urb->actual_length >=2) {
+	if (urb->actual_length  >= 2)
 		if (se401->button)
-			se401->buttonpressed=1;
-	}
+			se401->buttonpressed = 1;
 exit:
-	status = usb_submit_urb (urb, GFP_ATOMIC);
+	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status)
-		err ("%s - usb_submit_urb failed with result %d",
+		err("%s - usb_submit_urb failed with result %d",
 		     __func__, status);
 }
 
@@ -336,55 +342,52 @@ static void se401_video_irq(struct urb *urb)
 	   keeps sending them forever...
 	 */
 	if (length && !urb->status) {
-		se401->nullpackets=0;
-		switch(se401->scratch[se401->scratch_next].state) {
-			case BUFFER_READY:
-			case BUFFER_BUSY: {
-				se401->dropped++;
-				break;
-			}
-			case BUFFER_UNUSED: {
-				memcpy(se401->scratch[se401->scratch_next].data, (unsigned char *)urb->transfer_buffer, length);
-				se401->scratch[se401->scratch_next].state=BUFFER_READY;
-				se401->scratch[se401->scratch_next].offset=se401->bayeroffset;
-				se401->scratch[se401->scratch_next].length=length;
-				if (waitqueue_active(&se401->wq)) {
-					wake_up_interruptible(&se401->wq);
-				}
-				se401->scratch_overflow=0;
-				se401->scratch_next++;
-				if (se401->scratch_next>=SE401_NUMSCRATCH)
-					se401->scratch_next=0;
-				break;
-			}
-		}
-		se401->bayeroffset+=length;
-		if (se401->bayeroffset>=se401->cheight*se401->cwidth) {
-			se401->bayeroffset=0;
+		se401->nullpackets = 0;
+		switch (se401->scratch[se401->scratch_next].state) {
+		case BUFFER_READY:
+		case BUFFER_BUSY:
+			se401->dropped++;
+			break;
+		case BUFFER_UNUSED:
+			memcpy(se401->scratch[se401->scratch_next].data,
+				(unsigned char *)urb->transfer_buffer, length);
+			se401->scratch[se401->scratch_next].state
+							= BUFFER_READY;
+			se401->scratch[se401->scratch_next].offset
+							= se401->bayeroffset;
+			se401->scratch[se401->scratch_next].length = length;
+			if (waitqueue_active(&se401->wq))
+				wake_up_interruptible(&se401->wq);
+			se401->scratch_overflow = 0;
+			se401->scratch_next++;
+			if (se401->scratch_next >= SE401_NUMSCRATCH)
+				se401->scratch_next = 0;
+			break;
 		}
+		se401->bayeroffset += length;
+		if (se401->bayeroffset >= se401->cheight * se401->cwidth)
+			se401->bayeroffset = 0;
 	} else {
 		se401->nullpackets++;
-		if (se401->nullpackets > SE401_MAX_NULLPACKETS) {
-			if (waitqueue_active(&se401->wq)) {
+		if (se401->nullpackets > SE401_MAX_NULLPACKETS)
+			if (waitqueue_active(&se401->wq))
 				wake_up_interruptible(&se401->wq);
-			}
-		}
 	}
 
 	/* Resubmit urb for new data */
-	urb->status=0;
-	urb->dev=se401->dev;
-	if(usb_submit_urb(urb, GFP_KERNEL))
+	urb->status = 0;
+	urb->dev = se401->dev;
+	if (usb_submit_urb(urb, GFP_KERNEL))
 		dev_info(&urb->dev->dev, "urb burned down\n");
 	return;
 }
 
 static void se401_send_size(struct usb_se401 *se401, int width, int height)
 {
-	int i=0;
-	int mode=0x03; /* No compression */
-	int sendheight=height;
-	int sendwidth=width;
+	int i = 0;
+	int mode = 0x03; /* No compression */
+	int sendheight = height;
+	int sendwidth = width;
 
 	/* JangGu compression can only be used with the camera supported sizes,
 	   but bayer seems to work with any size that fits on the sensor.
@@ -392,18 +395,21 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height)
 	   4 or 16 times subcapturing, if not we use uncompressed bayer data
 	   but this will result in cutouts of the maximum size....
 	 */
-	while (i<se401->sizes && !(se401->width[i]==width && se401->height[i]==height))
+	while (i < se401->sizes && !(se401->width[i] == width &&
+						se401->height[i] == height))
 		i++;
-	while (i<se401->sizes) {
-		if (se401->width[i]==width*2 && se401->height[i]==height*2) {
-			sendheight=se401->height[i];
-			sendwidth=se401->width[i];
-			mode=0x40;
+	while (i < se401->sizes) {
+		if (se401->width[i] == width * 2 &&
+				se401->height[i] == height * 2) {
+			sendheight = se401->height[i];
+			sendwidth = se401->width[i];
+			mode = 0x40;
 		}
-		if (se401->width[i]==width*4 && se401->height[i]==height*4) {
-			sendheight=se401->height[i];
-			sendwidth=se401->width[i];
-			mode=0x42;
+		if (se401->width[i] == width * 4 &&
+				se401->height[i] == height * 4) {
+			sendheight = se401->height[i];
+			sendwidth = se401->width[i];
+			mode = 0x42;
 		}
 		i++;
 	}
@@ -412,13 +418,10 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height)
 	se401_sndctrl(1, se401, SE401_REQ_SET_HEIGHT, sendheight, NULL, 0);
 	se401_set_feature(se401, SE401_OPERATINGMODE, mode);
 
-	if (mode==0x03) {
-		se401->format=FMT_BAYER;
-	} else {
-		se401->format=FMT_JANGGU;
-	}
-
-	return;
+	if (mode == 0x03)
+		se401->format = FMT_BAYER;
+	else
+		se401->format = FMT_JANGGU;
 }
 
 /*
@@ -429,29 +432,31 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height)
 static int se401_start_stream(struct usb_se401 *se401)
 {
 	struct urb *urb;
-	int err=0, i;
-	se401->streaming=1;
+	int err = 0, i;
+	se401->streaming = 1;
 
 	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
 	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
 
 	/* Set picture settings */
-	se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);/*windowed + pix intg */
+	/* windowed + pix intg */
+	se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);
 	se401_send_pict(se401);
 
 	se401_send_size(se401, se401->cwidth, se401->cheight);
 
-	se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, NULL, 0);
+	se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE,
+								0, NULL, 0);
 
 	/* Do some memory allocation */
-	for (i=0; i<SE401_NUMFRAMES; i++) {
-		se401->frame[i].data=se401->fbuf + i * se401->maxframesize;
-		se401->frame[i].curpix=0;
+	for (i = 0; i < SE401_NUMFRAMES; i++) {
+		se401->frame[i].data = se401->fbuf + i * se401->maxframesize;
+		se401->frame[i].curpix = 0;
 	}
-	for (i=0; i<SE401_NUMSBUF; i++) {
-		se401->sbuf[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
+	for (i = 0; i < SE401_NUMSBUF; i++) {
+		se401->sbuf[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
 		if (!se401->sbuf[i].data) {
-			for(i = i - 1; i >= 0; i--) {
+			for (i = i - 1; i >= 0; i--) {
 				kfree(se401->sbuf[i].data);
 				se401->sbuf[i].data = NULL;
 			}
@@ -459,26 +464,26 @@ static int se401_start_stream(struct usb_se401 *se401)
 		}
 	}
 
-	se401->bayeroffset=0;
-	se401->scratch_next=0;
-	se401->scratch_use=0;
-	se401->scratch_overflow=0;
-	for (i=0; i<SE401_NUMSCRATCH; i++) {
-		se401->scratch[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
+	se401->bayeroffset = 0;
+	se401->scratch_next = 0;
+	se401->scratch_use = 0;
+	se401->scratch_overflow = 0;
+	for (i = 0; i < SE401_NUMSCRATCH; i++) {
+		se401->scratch[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL);
 		if (!se401->scratch[i].data) {
-			for(i = i - 1; i >= 0; i--) {
+			for (i = i - 1; i >= 0; i--) {
 				kfree(se401->scratch[i].data);
 				se401->scratch[i].data = NULL;
 			}
 			goto nomem_sbuf;
 		}
-		se401->scratch[i].state=BUFFER_UNUSED;
+		se401->scratch[i].state = BUFFER_UNUSED;
 	}
 
-	for (i=0; i<SE401_NUMSBUF; i++) {
-		urb=usb_alloc_urb(0, GFP_KERNEL);
-		if(!urb) {
-			for(i = i - 1; i >= 0; i--) {
+	for (i = 0; i < SE401_NUMSBUF; i++) {
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			for (i = i - 1; i >= 0; i--) {
 				usb_kill_urb(se401->urb[i]);
 				usb_free_urb(se401->urb[i]);
 				se401->urb[i] = NULL;
@@ -492,24 +497,24 @@ static int se401_start_stream(struct usb_se401 *se401)
 			se401_video_irq,
 			se401);
 
-		se401->urb[i]=urb;
+		se401->urb[i] = urb;
 
-		err=usb_submit_urb(se401->urb[i], GFP_KERNEL);
-		if(err)
+		err = usb_submit_urb(se401->urb[i], GFP_KERNEL);
+		if (err)
 			err("urb burned down");
 	}
 
-	se401->framecount=0;
+	se401->framecount = 0;
 
 	return 0;
 
  nomem_scratch:
-	for (i=0; i<SE401_NUMSCRATCH; i++) {
+	for (i = 0; i < SE401_NUMSCRATCH; i++) {
 		kfree(se401->scratch[i].data);
 		se401->scratch[i].data = NULL;
 	}
  nomem_sbuf:
-	for (i=0; i<SE401_NUMSBUF; i++) {
+	for (i = 0; i < SE401_NUMSBUF; i++) {
 		kfree(se401->sbuf[i].data);
 		se401->sbuf[i].data = NULL;
 	}
@@ -523,22 +528,23 @@ static int se401_stop_stream(struct usb_se401 *se401)
 	if (!se401->streaming || !se401->dev)
 		return 1;
 
-	se401->streaming=0;
+	se401->streaming = 0;
 
 	se401_sndctrl(1, se401, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, NULL, 0);
 
 	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0);
 	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
 
-	for (i=0; i<SE401_NUMSBUF; i++) if (se401->urb[i]) {
-		usb_kill_urb(se401->urb[i]);
-		usb_free_urb(se401->urb[i]);
-		se401->urb[i]=NULL;
-		kfree(se401->sbuf[i].data);
-	}
-	for (i=0; i<SE401_NUMSCRATCH; i++) {
+	for (i = 0; i < SE401_NUMSBUF; i++)
+		if (se401->urb[i]) {
+			usb_kill_urb(se401->urb[i]);
+			usb_free_urb(se401->urb[i]);
+			se401->urb[i] = NULL;
+			kfree(se401->sbuf[i].data);
+		}
+	for (i = 0; i < SE401_NUMSCRATCH; i++) {
 		kfree(se401->scratch[i].data);
-		se401->scratch[i].data=NULL;
+		se401->scratch[i].data = NULL;
 	}
 
 	return 0;
@@ -546,9 +552,9 @@ static int se401_stop_stream(struct usb_se401 *se401)
 
 static int se401_set_size(struct usb_se401 *se401, int width, int height)
 {
-	int wasstreaming=se401->streaming;
+	int wasstreaming = se401->streaming;
 	/* Check to see if we need to change */
-	if (se401->cwidth==width && se401->cheight==height)
+	if (se401->cwidth == width && se401->cheight == height)
 		return 0;
 
 	/* Check for a valid mode */
@@ -556,16 +562,16 @@ static int se401_set_size(struct usb_se401 *se401, int width, int height)
 		return 1;
 	if ((width & 1) || (height & 1))
 		return 1;
-	if (width>se401->width[se401->sizes-1])
+	if (width > se401->width[se401->sizes-1])
 		return 1;
-	if (height>se401->height[se401->sizes-1])
+	if (height > se401->height[se401->sizes-1])
 		return 1;
 
 	/* Stop a current stream and start it again at the new size */
 	if (wasstreaming)
 		se401_stop_stream(se401);
-	se401->cwidth=width;
-	se401->cheight=height;
+	se401->cwidth = width;
+	se401->cheight = height;
 	if (wasstreaming)
 		se401_start_stream(se401);
 	return 0;
@@ -586,68 +592,68 @@ static int se401_set_size(struct usb_se401 *se401, int width, int height)
 static inline void enhance_picture(unsigned char *frame, int len)
 {
 	while (len--) {
-		*frame=(((*frame^255)*(*frame^255))/255)^255;
+		*frame = (((*frame^255)*(*frame^255))/255)^255;
 		frame++;
 	}
 }
 
 static inline void decode_JangGu_integrate(struct usb_se401 *se401, int data)
 {
-	struct se401_frame *frame=&se401->frame[se401->curframe];
-	int linelength=se401->cwidth*3;
+	struct se401_frame *frame = &se401->frame[se401->curframe];
+	int linelength = se401->cwidth * 3;
 
 	if (frame->curlinepix >= linelength) {
-		frame->curlinepix=0;
-		frame->curline+=linelength;
+		frame->curlinepix = 0;
+		frame->curline += linelength;
 	}
 
 	/* First three are absolute, all others relative.
 	 * Format is rgb from right to left (mirrorred image),
 	 * we flip it to get bgr from left to right. */
-	if (frame->curlinepix < 3) {
-		*(frame->curline-frame->curlinepix)=1+data*4;
-	} else {
-		*(frame->curline-frame->curlinepix)=
-		    *(frame->curline-frame->curlinepix+3)+data*4;
-	}
+	if (frame->curlinepix < 3)
+		*(frame->curline-frame->curlinepix) = 1 + data * 4;
+	else
+		*(frame->curline-frame->curlinepix) =
+		    *(frame->curline-frame->curlinepix + 3) + data * 4;
 	frame->curlinepix++;
 }
 
-static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *data, int bit_exp, int packetlength)
+static inline void decode_JangGu_vlc(struct usb_se401 *se401,
+			unsigned char *data, int bit_exp, int packetlength)
 {
-	int pos=0;
-	int vlc_cod=0;
-	int vlc_size=0;
-	int vlc_data=0;
+	int pos = 0;
+	int vlc_cod = 0;
+	int vlc_size = 0;
+	int vlc_data = 0;
 	int bit_cur;
 	int bit;
-	data+=4;
+	data += 4;
 	while (pos < packetlength) {
-		bit_cur=8;
+		bit_cur = 8;
 		while (bit_cur && bit_exp) {
-			bit=((*data)>>(bit_cur-1))&1;
+			bit = ((*data) >> (bit_cur-1))&1;
 			if (!vlc_cod) {
 				if (bit) {
 					vlc_size++;
 				} else {
-					if (!vlc_size) {
+					if (!vlc_size)
 						decode_JangGu_integrate(se401, 0);
-					} else {
-						vlc_cod=2;
-						vlc_data=0;
+					else {
+						vlc_cod = 2;
+						vlc_data = 0;
 					}
 				}
 			} else {
-				if (vlc_cod==2) {
+				if (vlc_cod == 2) {
 					if (!bit)
-						vlc_data =  -(1<<vlc_size) + 1;
+						vlc_data =  -(1 << vlc_size) + 1;
 					vlc_cod--;
 				}
 				vlc_size--;
-				vlc_data+=bit<<vlc_size;
+				vlc_data += bit << vlc_size;
 				if (!vlc_size) {
 					decode_JangGu_integrate(se401, vlc_data);
-					vlc_cod=0;
+					vlc_cod = 0;
 				}
 			}
 			bit_cur--;
@@ -658,186 +664,188 @@ static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *da
 	}
 }
 
-static inline void decode_JangGu (struct usb_se401 *se401, struct se401_scratch *buffer)
+static inline void decode_JangGu(struct usb_se401 *se401,
+						struct se401_scratch *buffer)
 {
-	unsigned char *data=buffer->data;
-	int len=buffer->length;
-	int bit_exp=0, pix_exp=0, frameinfo=0, packetlength=0, size;
-	int datapos=0;
+	unsigned char *data = buffer->data;
+	int len = buffer->length;
+	int bit_exp = 0, pix_exp = 0, frameinfo = 0, packetlength = 0, size;
+	int datapos = 0;
 
 	/* New image? */
 	if (!se401->frame[se401->curframe].curpix) {
-		se401->frame[se401->curframe].curlinepix=0;
-		se401->frame[se401->curframe].curline=
+		se401->frame[se401->curframe].curlinepix = 0;
+		se401->frame[se401->curframe].curline =
 		    se401->frame[se401->curframe].data+
-		    se401->cwidth*3-1;
-		if (se401->frame[se401->curframe].grabstate==FRAME_READY)
-			se401->frame[se401->curframe].grabstate=FRAME_GRABBING;
-		se401->vlcdatapos=0;
+		    se401->cwidth * 3 - 1;
+		if (se401->frame[se401->curframe].grabstate == FRAME_READY)
+			se401->frame[se401->curframe].grabstate = FRAME_GRABBING;
+		se401->vlcdatapos = 0;
 	}
 	while (datapos < len) {
-		size=1024-se401->vlcdatapos;
+		size = 1024 - se401->vlcdatapos;
 		if (size+datapos > len)
-			size=len-datapos;
+			size = len-datapos;
 		memcpy(se401->vlcdata+se401->vlcdatapos, data+datapos, size);
-		se401->vlcdatapos+=size;
-		packetlength=0;
+		se401->vlcdatapos += size;
+		packetlength = 0;
 		if (se401->vlcdatapos >= 4) {
-			bit_exp=se401->vlcdata[3]+(se401->vlcdata[2]<<8);
-			pix_exp=se401->vlcdata[1]+((se401->vlcdata[0]&0x3f)<<8);
-			frameinfo=se401->vlcdata[0]&0xc0;
-			packetlength=((bit_exp+47)>>4)<<1;
+			bit_exp = se401->vlcdata[3] + (se401->vlcdata[2] << 8);
+			pix_exp = se401->vlcdata[1] +
+					((se401->vlcdata[0] & 0x3f) << 8);
+			frameinfo = se401->vlcdata[0] & 0xc0;
+			packetlength = ((bit_exp + 47) >> 4) << 1;
 			if (packetlength > 1024) {
-				se401->vlcdatapos=0;
-				datapos=len;
-				packetlength=0;
+				se401->vlcdatapos = 0;
+				datapos = len;
+				packetlength = 0;
 				se401->error++;
-				se401->frame[se401->curframe].curpix=0;
+				se401->frame[se401->curframe].curpix = 0;
 			}
 		}
 		if (packetlength && se401->vlcdatapos >= packetlength) {
-			decode_JangGu_vlc(se401, se401->vlcdata, bit_exp, packetlength);
-			se401->frame[se401->curframe].curpix+=pix_exp*3;
-			datapos+=size-(se401->vlcdatapos-packetlength);
-			se401->vlcdatapos=0;
-			if (se401->frame[se401->curframe].curpix>=se401->cwidth*se401->cheight*3) {
-				if (se401->frame[se401->curframe].curpix==se401->cwidth*se401->cheight*3) {
-					if (se401->frame[se401->curframe].grabstate==FRAME_GRABBING) {
-						se401->frame[se401->curframe].grabstate=FRAME_DONE;
+			decode_JangGu_vlc(se401, se401->vlcdata, bit_exp,
+								packetlength);
+			se401->frame[se401->curframe].curpix += pix_exp * 3;
+			datapos += size-(se401->vlcdatapos-packetlength);
+			se401->vlcdatapos = 0;
+			if (se401->frame[se401->curframe].curpix >= se401->cwidth * se401->cheight * 3) {
+				if (se401->frame[se401->curframe].curpix == se401->cwidth * se401->cheight * 3) {
+					if (se401->frame[se401->curframe].grabstate == FRAME_GRABBING) {
+						se401->frame[se401->curframe].grabstate = FRAME_DONE;
 						se401->framecount++;
 						se401->readcount++;
 					}
-					if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) {
-						se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1);
-					}
-				} else {
+					if (se401->frame[(se401->curframe + 1) & (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY)
+						se401->curframe = (se401->curframe + 1) & (SE401_NUMFRAMES - 1);
+				} else
 					se401->error++;
-				}
-				se401->frame[se401->curframe].curpix=0;
-				datapos=len;
+				se401->frame[se401->curframe].curpix = 0;
+				datapos = len;
 			}
-		} else {
-			datapos+=size;
-		}
+		} else
+			datapos += size;
 	}
 }
 
-static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch *buffer)
+static inline void decode_bayer(struct usb_se401 *se401,
+						struct se401_scratch *buffer)
 {
-	unsigned char *data=buffer->data;
-	int len=buffer->length;
-	int offset=buffer->offset;
-	int datasize=se401->cwidth*se401->cheight;
-	struct se401_frame *frame=&se401->frame[se401->curframe];
+	unsigned char *data = buffer->data;
+	int len = buffer->length;
+	int offset = buffer->offset;
+	int datasize = se401->cwidth * se401->cheight;
+	struct se401_frame *frame = &se401->frame[se401->curframe];
+	unsigned char *framedata = frame->data, *curline, *nextline;
+	int width = se401->cwidth;
+	int blineoffset = 0, bline;
+	int linelength = width * 3, i;
 
-	unsigned char *framedata=frame->data, *curline, *nextline;
-	int width=se401->cwidth;
-	int blineoffset=0, bline;
-	int linelength=width*3, i;
 
+	if (frame->curpix == 0) {
+		if (frame->grabstate == FRAME_READY)
+			frame->grabstate = FRAME_GRABBING;
 
-	if (frame->curpix==0) {
-		if (frame->grabstate==FRAME_READY) {
-			frame->grabstate=FRAME_GRABBING;
-		}
-		frame->curline=framedata+linelength;
-		frame->curlinepix=0;
+		frame->curline = framedata + linelength;
+		frame->curlinepix = 0;
 	}
 
-	if (offset!=frame->curpix) {
+	if (offset != frame->curpix) {
 		/* Regard frame as lost :( */
-		frame->curpix=0;
+		frame->curpix = 0;
 		se401->error++;
 		return;
 	}
 
 	/* Check if we have to much data */
-	if (frame->curpix+len > datasize) {
-		len=datasize-frame->curpix;
-	}
-	if (se401->cheight%4)
-		blineoffset=1;
-	bline=frame->curpix/se401->cwidth+blineoffset;
-
-	curline=frame->curline;
-	nextline=curline+linelength;
-	if (nextline >= framedata+datasize*3)
-		nextline=curline;
+	if (frame->curpix + len > datasize)
+		len = datasize-frame->curpix;
+
+	if (se401->cheight % 4)
+		blineoffset = 1;
+	bline = frame->curpix / se401->cwidth+blineoffset;
+
+	curline = frame->curline;
+	nextline = curline + linelength;
+	if (nextline >= framedata+datasize * 3)
+		nextline = curline;
 	while (len) {
-		if (frame->curlinepix>=width) {
-			frame->curlinepix-=width;
-			bline=frame->curpix/width+blineoffset;
-			curline+=linelength*2;
-			nextline+=linelength*2;
-			if (curline >= framedata+datasize*3) {
+		if (frame->curlinepix >= width) {
+			frame->curlinepix -= width;
+			bline = frame->curpix / width + blineoffset;
+			curline += linelength*2;
+			nextline += linelength*2;
+			if (curline >= framedata+datasize * 3) {
 				frame->curlinepix++;
-				curline-=3;
-				nextline-=3;
+				curline -= 3;
+				nextline -= 3;
 				len--;
 				data++;
 				frame->curpix++;
 			}
 			if (nextline >= framedata+datasize*3)
-				nextline=curline;
+				nextline = curline;
 		}
-		if ((bline&1)) {
-			if ((frame->curlinepix&1)) {
-				*(curline+2)=*data;
-				*(curline-1)=*data;
-				*(nextline+2)=*data;
-				*(nextline-1)=*data;
+		if (bline & 1) {
+			if (frame->curlinepix & 1) {
+				*(curline + 2) = *data;
+				*(curline - 1) = *data;
+				*(nextline + 2) = *data;
+				*(nextline - 1) = *data;
 			} else {
-				*(curline+1)=
-					(*(curline+1)+*data)/2;
-				*(curline-2)=
-					(*(curline-2)+*data)/2;
-				*(nextline+1)=*data;
-				*(nextline-2)=*data;
+				*(curline + 1) =
+					(*(curline + 1) + *data) / 2;
+				*(curline-2) =
+					(*(curline - 2) + *data) / 2;
+				*(nextline + 1) = *data;
+				*(nextline - 2) = *data;
 			}
 		} else {
-			if ((frame->curlinepix&1)) {
-				*(curline+1)=
-					(*(curline+1)+*data)/2;
-				*(curline-2)=
-					(*(curline-2)+*data)/2;
-				*(nextline+1)=*data;
-				*(nextline-2)=*data;
+			if (frame->curlinepix & 1) {
+				*(curline + 1) =
+					(*(curline + 1) + *data) / 2;
+				*(curline - 2) =
+					(*(curline - 2) + *data) / 2;
+				*(nextline + 1) = *data;
+				*(nextline - 2) = *data;
 			} else {
-				*curline=*data;
-				*(curline-3)=*data;
-				*nextline=*data;
-				*(nextline-3)=*data;
+				*curline = *data;
+				*(curline - 3) = *data;
+				*nextline = *data;
+				*(nextline - 3) = *data;
 			}
 		}
 		frame->curlinepix++;
-		curline-=3;
-		nextline-=3;
+		curline -= 3;
+		nextline -= 3;
 		len--;
 		data++;
 		frame->curpix++;
 	}
-	frame->curline=curline;
+	frame->curline = curline;
 
-	if (frame->curpix>=datasize) {
+	if (frame->curpix >= datasize) {
 		/* Fix the top line */
-		framedata+=linelength;
-		for (i=0; i<linelength; i++) {
+		framedata += linelength;
+		for (i = 0; i < linelength; i++) {
 			framedata--;
-			*framedata=*(framedata+linelength);
+			*framedata = *(framedata + linelength);
 		}
 		/* Fix the left side (green is already present) */
-		for (i=0; i<se401->cheight; i++) {
-			*framedata=*(framedata+3);
-			*(framedata+1)=*(framedata+4);
-			*(framedata+2)=*(framedata+5);
-			framedata+=linelength;
+		for (i = 0; i < se401->cheight; i++) {
+			*framedata = *(framedata + 3);
+			*(framedata + 1) = *(framedata + 4);
+			*(framedata + 2) = *(framedata + 5);
+			framedata += linelength;
 		}
-		frame->curpix=0;
-		frame->grabstate=FRAME_DONE;
+		frame->curpix = 0;
+		frame->grabstate = FRAME_DONE;
 		se401->framecount++;
 		se401->readcount++;
-		if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) {
-			se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1);
+		if (se401->frame[(se401->curframe + 1) &
+		    (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY) {
+			se401->curframe = (se401->curframe+1) &
+							(SE401_NUMFRAMES-1);
 		}
 	}
 }
@@ -845,72 +853,76 @@ static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch *
 static int se401_newframe(struct usb_se401 *se401, int framenr)
 {
 	DECLARE_WAITQUEUE(wait, current);
-	int errors=0;
+	int errors = 0;
 
 	while (se401->streaming &&
-	    (se401->frame[framenr].grabstate==FRAME_READY ||
-	     se401->frame[framenr].grabstate==FRAME_GRABBING) ) {
-		if(!se401->frame[framenr].curpix) {
+	    (se401->frame[framenr].grabstate == FRAME_READY ||
+	     se401->frame[framenr].grabstate == FRAME_GRABBING)) {
+		if (!se401->frame[framenr].curpix)
 			errors++;
-		}
+
 		wait_interruptible(
-		    se401->scratch[se401->scratch_use].state!=BUFFER_READY,
-		    &se401->wq,
-		    &wait
-		);
+		    se401->scratch[se401->scratch_use].state != BUFFER_READY,
+						    &se401->wq, &wait);
 		if (se401->nullpackets > SE401_MAX_NULLPACKETS) {
-			se401->nullpackets=0;
+			se401->nullpackets = 0;
 			dev_info(&se401->dev->dev,
-				 "too many null length packets, restarting capture\n");
+			 "too many null length packets, restarting capture\n");
 			se401_stop_stream(se401);
 			se401_start_stream(se401);
 		} else {
-			if (se401->scratch[se401->scratch_use].state!=BUFFER_READY) {
-				se401->frame[framenr].grabstate=FRAME_ERROR;
+			if (se401->scratch[se401->scratch_use].state !=
+								BUFFER_READY) {
+				se401->frame[framenr].grabstate = FRAME_ERROR;
 				return -EIO;
 			}
-			se401->scratch[se401->scratch_use].state=BUFFER_BUSY;
-			if (se401->format==FMT_JANGGU) {
-				decode_JangGu(se401, &se401->scratch[se401->scratch_use]);
-			} else {
-				decode_bayer(se401, &se401->scratch[se401->scratch_use]);
-			}
-			se401->scratch[se401->scratch_use].state=BUFFER_UNUSED;
+			se401->scratch[se401->scratch_use].state = BUFFER_BUSY;
+			if (se401->format == FMT_JANGGU)
+				decode_JangGu(se401,
+					&se401->scratch[se401->scratch_use]);
+			else
+				decode_bayer(se401,
+					&se401->scratch[se401->scratch_use]);
+
+			se401->scratch[se401->scratch_use].state =
+							BUFFER_UNUSED;
 			se401->scratch_use++;
-			if (se401->scratch_use>=SE401_NUMSCRATCH)
-				se401->scratch_use=0;
+			if (se401->scratch_use >= SE401_NUMSCRATCH)
+				se401->scratch_use = 0;
 			if (errors > SE401_MAX_ERRORS) {
-				errors=0;
+				errors = 0;
 				dev_info(&se401->dev->dev,
-					 "too many errors, restarting capture\n");
+				      "too many errors, restarting capture\n");
 				se401_stop_stream(se401);
 				se401_start_stream(se401);
 			}
 		}
 	}
 
-	if (se401->frame[framenr].grabstate==FRAME_DONE)
+	if (se401->frame[framenr].grabstate == FRAME_DONE)
 		if (se401->enhance)
-			enhance_picture(se401->frame[framenr].data, se401->cheight*se401->cwidth*3);
+			enhance_picture(se401->frame[framenr].data,
+					se401->cheight * se401->cwidth * 3);
 	return 0;
 }
 
-static void usb_se401_remove_disconnected (struct usb_se401 *se401)
+static void usb_se401_remove_disconnected(struct usb_se401 *se401)
 {
 	int i;
 
 	se401->dev = NULL;
 
-	for (i=0; i<SE401_NUMSBUF; i++)
+	for (i = 0; i < SE401_NUMSBUF; i++)
 		if (se401->urb[i]) {
 			usb_kill_urb(se401->urb[i]);
 			usb_free_urb(se401->urb[i]);
 			se401->urb[i] = NULL;
 			kfree(se401->sbuf[i].data);
 		}
-	for (i=0; i<SE401_NUMSCRATCH; i++) {
+
+	for (i = 0; i < SE401_NUMSCRATCH; i++)
 		kfree(se401->scratch[i].data);
-	}
+
 	if (se401->inturb) {
 		usb_kill_urb(se401->inturb);
 		usb_free_urb(se401->inturb);
@@ -965,11 +977,11 @@ static int se401_close(struct file *file)
 		dev_info(&se401->dev->dev, "device unregistered\n");
 		usb_se401_remove_disconnected(se401);
 	} else {
-		for (i=0; i<SE401_NUMFRAMES; i++)
-			se401->frame[i].grabstate=FRAME_UNUSED;
+		for (i = 0; i < SE401_NUMFRAMES; i++)
+			se401->frame[i].grabstate = FRAME_UNUSED;
 		if (se401->streaming)
 			se401_stop_stream(se401);
-		se401->user=0;
+		se401->user = 0;
 	}
 	file->private_data = NULL;
 	return 0;
@@ -1065,7 +1077,7 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		memset(vm, 0, sizeof(*vm));
 		vm->size = SE401_NUMFRAMES * se401->maxframesize;
 		vm->frames = SE401_NUMFRAMES;
-		for (i=0; i<SE401_NUMFRAMES; i++)
+		for (i = 0; i < SE401_NUMFRAMES; i++)
 			vm->offsets[i] = se401->maxframesize * i;
 		return 0;
 	}
@@ -1083,16 +1095,16 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		/* Is this according to the v4l spec??? */
 		if (se401_set_size(se401, vm->width, vm->height))
 			return -EINVAL;
-		se401->frame[vm->frame].grabstate=FRAME_READY;
+		se401->frame[vm->frame].grabstate = FRAME_READY;
 
 		if (!se401->streaming)
 			se401_start_stream(se401);
 
 		/* Set the picture properties */
-		if (se401->framecount==0)
+		if (se401->framecount == 0)
 			se401_send_pict(se401);
 		/* Calibrate the reset level after a few frames. */
-		if (se401->framecount%20==1)
+		if (se401->framecount % 20 == 1)
 			se401_auto_resetlevel(se401);
 
 		return 0;
@@ -1100,13 +1112,13 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	case VIDIOCSYNC:
 	{
 		int *frame = arg;
-		int ret=0;
+		int ret = 0;
 
-		if(*frame <0 || *frame >= SE401_NUMFRAMES)
+		if (*frame < 0 || *frame >= SE401_NUMFRAMES)
 			return -EINVAL;
 
-		ret=se401_newframe(se401, *frame);
-		se401->frame[*frame].grabstate=FRAME_UNUSED;
+		ret = se401_newframe(se401, *frame);
+		se401->frame[*frame].grabstate = FRAME_UNUSED;
 		return ret;
 	}
 	case VIDIOCGFBUF:
@@ -1147,36 +1159,36 @@ static long se401_ioctl(struct file *file,
 static ssize_t se401_read(struct file *file, char __user *buf,
 		     size_t count, loff_t *ppos)
 {
-	int realcount=count, ret=0;
+	int realcount = count, ret = 0;
 	struct video_device *dev = file->private_data;
 	struct usb_se401 *se401 = (struct usb_se401 *)dev;
 
 
-	if (se401->dev == NULL)
+	if (se401->dev ==  NULL)
 		return -EIO;
 	if (realcount > se401->cwidth*se401->cheight*3)
-		realcount=se401->cwidth*se401->cheight*3;
+		realcount = se401->cwidth*se401->cheight*3;
 
 	/* Shouldn't happen: */
-	if (se401->frame[0].grabstate==FRAME_GRABBING)
+	if (se401->frame[0].grabstate == FRAME_GRABBING)
 		return -EBUSY;
-	se401->frame[0].grabstate=FRAME_READY;
-	se401->frame[1].grabstate=FRAME_UNUSED;
-	se401->curframe=0;
+	se401->frame[0].grabstate = FRAME_READY;
+	se401->frame[1].grabstate = FRAME_UNUSED;
+	se401->curframe = 0;
 
 	if (!se401->streaming)
 		se401_start_stream(se401);
 
 	/* Set the picture properties */
-	if (se401->framecount==0)
+	if (se401->framecount == 0)
 		se401_send_pict(se401);
 	/* Calibrate the reset level after a few frames. */
-	if (se401->framecount%20==1)
+	if (se401->framecount%20 == 1)
 		se401_auto_resetlevel(se401);
 
-	ret=se401_newframe(se401, 0);
+	ret = se401_newframe(se401, 0);
 
-	se401->frame[0].grabstate=FRAME_UNUSED;
+	se401->frame[0].grabstate = FRAME_UNUSED;
 	if (ret)
 		return ret;
 	if (copy_to_user(buf, se401->frame[0].data, realcount))
@@ -1195,11 +1207,12 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma)
 
 	mutex_lock(&se401->lock);
 
-	if (se401->dev == NULL) {
+	if (se401->dev ==  NULL) {
 		mutex_unlock(&se401->lock);
 		return -EIO;
 	}
-	if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) {
+	if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1)
+							& ~(PAGE_SIZE - 1))) {
 		mutex_unlock(&se401->lock);
 		return -EINVAL;
 	}
@@ -1210,10 +1223,10 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma)
 			mutex_unlock(&se401->lock);
 			return -EAGAIN;
 		}
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
+		start +=  PAGE_SIZE;
+		pos +=  PAGE_SIZE;
 		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
+			size -=  PAGE_SIZE;
 		else
 			size = 0;
 	}
@@ -1223,7 +1236,7 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma)
 }
 
 static const struct v4l2_file_operations se401_fops = {
-	.owner =	THIS_MODULE,
+	.owner  = 	THIS_MODULE,
 	.open =         se401_open,
 	.release =      se401_close,
 	.read =         se401_read,
@@ -1241,71 +1254,76 @@ static struct video_device se401_template = {
 /***************************/
 static int se401_init(struct usb_se401 *se401, int button)
 {
-	int i=0, rc;
+	int i = 0, rc;
 	unsigned char cp[0x40];
 	char temp[200];
+	int slen;
 
 	/* led on */
 	se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
 
 	/* get camera descriptor */
-	rc=se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, cp, sizeof(cp));
-	if (cp[1]!=0x41) {
+	rc = se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0,
+							cp, sizeof(cp));
+	if (cp[1] != 0x41) {
 		err("Wrong descriptor type");
 		return 1;
 	}
-	sprintf (temp, "ExtraFeatures: %d", cp[3]);
+	slen = snprintf(temp, 200, "ExtraFeatures: %d", cp[3]);
 
-	se401->sizes=cp[4]+cp[5]*256;
-	se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
+	se401->sizes = cp[4] + cp[5] * 256;
+	se401->width = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
 	if (!se401->width)
 		return 1;
-	se401->height=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
+	se401->height = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL);
 	if (!se401->height) {
 		kfree(se401->width);
 		return 1;
 	}
-	for (i=0; i<se401->sizes; i++) {
-		    se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256;
-		    se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256;
+	for (i = 0; i < se401->sizes; i++) {
+		se401->width[i] = cp[6 + i * 4 + 0] + cp[6 + i*4 + 1] * 256;
+		se401->height[i] = cp[6 + i * 4 + 2] + cp[6 + i * 4 + 3] * 256;
 	}
-	sprintf (temp, "%s Sizes:", temp);
-	for (i=0; i<se401->sizes; i++) {
-		sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]);
+	slen += snprintf(temp + slen, 200 - slen, " Sizes:");
+	for (i = 0; i < se401->sizes; i++) {
+		slen +=  snprintf(temp + slen, 200 - slen,
+			" %dx%d", se401->width[i], se401->height[i]);
 	}
 	dev_info(&se401->dev->dev, "%s\n", temp);
-	se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3;
+	se401->maxframesize = se401->width[se401->sizes-1] *
+					se401->height[se401->sizes - 1] * 3;
 
-	rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp));
-	se401->cwidth=cp[0]+cp[1]*256;
-	rc=se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp));
-	se401->cheight=cp[0]+cp[1]*256;
+	rc = se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp));
+	se401->cwidth = cp[0]+cp[1]*256;
+	rc = se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp));
+	se401->cheight = cp[0]+cp[1]*256;
 
 	if (!(cp[2] & SE401_FORMAT_BAYER)) {
 		err("Bayer format not supported!");
 		return 1;
 	}
 	/* set output mode (BAYER) */
-	se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, SE401_FORMAT_BAYER, NULL, 0);
+	se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE,
+						SE401_FORMAT_BAYER, NULL, 0);
 
-	rc=se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp));
-	se401->brightness=cp[0]+cp[1]*256;
+	rc = se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp));
+	se401->brightness = cp[0]+cp[1]*256;
 	/* some default values */
-	se401->resetlevel=0x2d;
-	se401->rgain=0x20;
-	se401->ggain=0x20;
-	se401->bgain=0x20;
+	se401->resetlevel = 0x2d;
+	se401->rgain = 0x20;
+	se401->ggain = 0x20;
+	se401->bgain = 0x20;
 	se401_set_exposure(se401, 20000);
-	se401->palette=VIDEO_PALETTE_RGB24;
-	se401->enhance=1;
-	se401->dropped=0;
-	se401->error=0;
-	se401->framecount=0;
-	se401->readcount=0;
+	se401->palette = VIDEO_PALETTE_RGB24;
+	se401->enhance = 1;
+	se401->dropped = 0;
+	se401->error = 0;
+	se401->framecount = 0;
+	se401->readcount = 0;
 
 	/* Start interrupt transfers for snapshot button */
 	if (button) {
-		se401->inturb=usb_alloc_urb(0, GFP_KERNEL);
+		se401->inturb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!se401->inturb) {
 			dev_info(&se401->dev->dev,
 				 "Allocation of inturb failed\n");
@@ -1323,7 +1341,7 @@ static int se401_init(struct usb_se401 *se401, int button)
 			return 1;
 		}
 	} else
-		se401->inturb=NULL;
+		se401->inturb = NULL;
 
 	/* Flash the led */
 	se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
@@ -1340,8 +1358,8 @@ static int se401_probe(struct usb_interface *intf,
 	struct usb_device *dev = interface_to_usbdev(intf);
 	struct usb_interface_descriptor *interface;
 	struct usb_se401 *se401;
-	char *camera_name=NULL;
-	int button=1;
+	char *camera_name = NULL;
+	int button = 1;
 
 	/* We don't handle multi-config cameras */
 	if (dev->descriptor.bNumConfigurations != 1)
@@ -1350,22 +1368,22 @@ static int se401_probe(struct usb_interface *intf,
 	interface = &intf->cur_altsetting->desc;
 
 	/* Is it an se401? */
-	if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 &&
-	    le16_to_cpu(dev->descriptor.idProduct) == 0x0004) {
-		camera_name="Endpoints/Aox SE401";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 &&
-	    le16_to_cpu(dev->descriptor.idProduct) == 0x030b) {
-		camera_name="Philips PCVC665K";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) == 0x5001) {
-		camera_name="Kensington VideoCAM 67014";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) == 0x5002) {
-		camera_name="Kensington VideoCAM 6701(5/7)";
-	} else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
-	    le16_to_cpu(dev->descriptor.idProduct) == 0x5003) {
-		camera_name="Kensington VideoCAM 67016";
-		button=0;
+	if (le16_to_cpu(dev->descriptor.idVendor) ==  0x03e8 &&
+	    le16_to_cpu(dev->descriptor.idProduct) ==  0x0004) {
+		camera_name = "Endpoints/Aox SE401";
+	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x0471 &&
+	    le16_to_cpu(dev->descriptor.idProduct) ==  0x030b) {
+		camera_name = "Philips PCVC665K";
+	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
+	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5001) {
+		camera_name = "Kensington VideoCAM 67014";
+	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
+	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5002) {
+		camera_name = "Kensington VideoCAM 6701(5/7)";
+	} else if (le16_to_cpu(dev->descriptor.idVendor) ==  0x047d &&
+	    le16_to_cpu(dev->descriptor.idProduct) ==  0x5003) {
+		camera_name = "Kensington VideoCAM 67016";
+		button = 0;
 	} else
 		return -ENODEV;
 
@@ -1378,7 +1396,8 @@ static int se401_probe(struct usb_interface *intf,
 	/* We found one */
 	dev_info(&intf->dev, "SE401 camera found: %s\n", camera_name);
 
-	if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) {
+	se401 = kzalloc(sizeof(*se401), GFP_KERNEL);
+	if (se401 ==  NULL) {
 		err("couldn't kmalloc se401 struct");
 		return -ENOMEM;
 	}
@@ -1396,12 +1415,14 @@ static int se401_probe(struct usb_interface *intf,
 	}
 
 	memcpy(&se401->vdev, &se401_template, sizeof(se401_template));
-	memcpy(se401->vdev.name, se401->camera_name, strlen(se401->camera_name));
+	memcpy(se401->vdev.name, se401->camera_name,
+					strlen(se401->camera_name));
 	init_waitqueue_head(&se401->wq);
 	mutex_init(&se401->lock);
 	wmb();
 
-	if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
+	if (video_register_device(&se401->vdev,
+					VFL_TYPE_GRABBER, video_nr) < 0) {
 		kfree(se401);
 		err("video_register_device failed");
 		return -EIO;
@@ -1409,20 +1430,20 @@ static int se401_probe(struct usb_interface *intf,
 	dev_info(&intf->dev, "registered new video device: video%d\n",
 		 se401->vdev.num);
 
-	usb_set_intfdata (intf, se401);
+	usb_set_intfdata(intf, se401);
 	return 0;
 }
 
 static void se401_disconnect(struct usb_interface *intf)
 {
-	struct usb_se401 *se401 = usb_get_intfdata (intf);
+	struct usb_se401 *se401 = usb_get_intfdata(intf);
 
-	usb_set_intfdata (intf, NULL);
+	usb_set_intfdata(intf, NULL);
 	if (se401) {
 		video_unregister_device(&se401->vdev);
-		if (!se401->user){
+		if (!se401->user)
 			usb_se401_remove_disconnected(se401);
-		} else {
+		else {
 			se401->frame[0].grabstate = FRAME_ERROR;
 			se401->frame[0].grabstate = FRAME_ERROR;
 
@@ -1435,10 +1456,10 @@ static void se401_disconnect(struct usb_interface *intf)
 }
 
 static struct usb_driver se401_driver = {
-	.name		= "se401",
-	.id_table	= device_table,
-	.probe		= se401_probe,
-	.disconnect	= se401_disconnect,
+	.name		 =  "se401",
+	.id_table	 =  device_table,
+	.probe		 =  se401_probe,
+	.disconnect	 =  se401_disconnect,
 };
 
 
@@ -1451,9 +1472,10 @@ static struct usb_driver se401_driver = {
 
 static int __init usb_se401_init(void)
 {
-	printk(KERN_INFO "SE401 usb camera driver version %s registering\n", version);
+	printk(KERN_INFO "SE401 usb camera driver version %s registering\n",
+								version);
 	if (flickerless)
-		if (flickerless!=50 && flickerless!=60) {
+		if (flickerless != 50 && flickerless != 60) {
 			printk(KERN_ERR "Invallid flickerless value, use 0, 50 or 60.\n");
 			return -1;
 	}
diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h
index 2ce685db5d8..bf7d2e9765b 100644
--- a/drivers/media/video/se401.h
+++ b/drivers/media/video/se401.h
@@ -2,7 +2,7 @@
 #ifndef __LINUX_se401_H
 #define __LINUX_se401_H
 
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/videodev.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
@@ -12,9 +12,10 @@
 
 #ifdef se401_DEBUG
 #  define PDEBUG(level, fmt, args...) \
-if (debug >= level) info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args)
+if (debug >= level) \
+	info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args)
 #else
-#  define PDEBUG(level, fmt, args...) do {} while(0)
+#  define PDEBUG(level, fmt, args...) do {} while (0)
 #endif
 
 /* An almost drop-in replacement for sleep_on_interruptible */
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index b5e37a530c6..d369e8409ab 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -81,7 +81,6 @@ struct sh_mobile_ceu_buffer {
 };
 
 struct sh_mobile_ceu_dev {
-	struct device *dev;
 	struct soc_camera_host ici;
 	struct soc_camera_device *icd;
 
@@ -617,7 +616,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(&ici->dev, "Providing format %s using %s\n",
+			dev_dbg(ici->dev, "Providing format %s using %s\n",
 				sh_mobile_ceu_formats[k].name,
 				icd->formats[idx].name);
 		}
@@ -630,7 +629,7 @@ add_single_format:
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(&ici->dev,
+			dev_dbg(ici->dev,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -657,7 +656,7 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -684,7 +683,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -782,7 +781,7 @@ static void sh_mobile_ceu_init_videobuf(struct videobuf_queue *q,
 
 	videobuf_queue_dma_contig_init(q,
 				       &sh_mobile_ceu_videobuf_ops,
-				       &ici->dev, &pcdev->lock,
+				       ici->dev, &pcdev->lock,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       pcdev->is_interlaced ?
 				       V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE,
@@ -829,7 +828,6 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 		goto exit;
 	}
 
-	platform_set_drvdata(pdev, pcdev);
 	INIT_LIST_HEAD(&pcdev->capture);
 	spin_lock_init(&pcdev->lock);
 
@@ -840,7 +838,7 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 		goto exit_kfree;
 	}
 
-	base = ioremap_nocache(res->start, res->end - res->start + 1);
+	base = ioremap_nocache(res->start, resource_size(res));
 	if (!base) {
 		err = -ENXIO;
 		dev_err(&pdev->dev, "Unable to ioremap CEU registers.\n");
@@ -850,13 +848,12 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 	pcdev->irq = irq;
 	pcdev->base = base;
 	pcdev->video_limit = 0; /* only enabled if second resource exists */
-	pcdev->dev = &pdev->dev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (res) {
 		err = dma_declare_coherent_memory(&pdev->dev, res->start,
 						  res->start,
-						  (res->end - res->start) + 1,
+						  resource_size(res),
 						  DMA_MEMORY_MAP |
 						  DMA_MEMORY_EXCLUSIVE);
 		if (!err) {
@@ -865,7 +862,7 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 			goto exit_iounmap;
 		}
 
-		pcdev->video_limit = (res->end - res->start) + 1;
+		pcdev->video_limit = resource_size(res);
 	}
 
 	/* request irq */
@@ -885,7 +882,7 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 	}
 
 	pcdev->ici.priv = pcdev;
-	pcdev->ici.dev.parent = &pdev->dev;
+	pcdev->ici.dev = &pdev->dev;
 	pcdev->ici.nr = pdev->id;
 	pcdev->ici.drv_name = dev_name(&pdev->dev);
 	pcdev->ici.ops = &sh_mobile_ceu_host_ops;
@@ -913,9 +910,11 @@ exit:
 
 static int sh_mobile_ceu_remove(struct platform_device *pdev)
 {
-	struct sh_mobile_ceu_dev *pcdev = platform_get_drvdata(pdev);
+	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+	struct sh_mobile_ceu_dev *pcdev = container_of(soc_host,
+					struct sh_mobile_ceu_dev, ici);
 
-	soc_camera_host_unregister(&pcdev->ici);
+	soc_camera_host_unregister(soc_host);
 	clk_put(pcdev->clk);
 	free_irq(pcdev->irq, pcdev);
 	if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 0e890cc2337..16f595d4337 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -16,19 +16,21 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
-#include <linux/init.h>
 #include <linux/device.h>
-#include <linux/list.h>
 #include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
 #include <linux/vmalloc.h>
 
+#include <media/soc_camera.h>
 #include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
 #include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
 #include <media/videobuf-core.h>
-#include <media/soc_camera.h>
 
 /* Default to VGA resolution */
 #define DEFAULT_WIDTH	640
@@ -279,7 +281,7 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf,
 		return ret;
 	} else if (!icd->current_fmt ||
 		   icd->current_fmt->fourcc != pix->pixelformat) {
-		dev_err(&ici->dev,
+		dev_err(ici->dev,
 			"Host driver hasn't set up current format correctly!\n");
 		return -EINVAL;
 	}
@@ -794,7 +796,7 @@ static void scan_add_host(struct soc_camera_host *ici)
 
 	list_for_each_entry(icd, &devices, list) {
 		if (icd->iface == ici->nr) {
-			icd->dev.parent = &ici->dev;
+			icd->dev.parent = ici->dev;
 			device_register_link(icd);
 		}
 	}
@@ -818,7 +820,7 @@ static int scan_add_device(struct soc_camera_device *icd)
 	list_for_each_entry(ici, &hosts, list) {
 		if (icd->iface == ici->nr) {
 			ret = 1;
-			icd->dev.parent = &ici->dev;
+			icd->dev.parent = ici->dev;
 			break;
 		}
 	}
@@ -952,7 +954,6 @@ static void dummy_release(struct device *dev)
 
 int soc_camera_host_register(struct soc_camera_host *ici)
 {
-	int ret;
 	struct soc_camera_host *ix;
 
 	if (!ici || !ici->ops ||
@@ -965,12 +966,10 @@ int soc_camera_host_register(struct soc_camera_host *ici)
 	    !ici->ops->reqbufs ||
 	    !ici->ops->add ||
 	    !ici->ops->remove ||
-	    !ici->ops->poll)
+	    !ici->ops->poll ||
+	    !ici->dev)
 		return -EINVAL;
 
-	/* Number might be equal to the platform device ID */
-	dev_set_name(&ici->dev, "camera_host%d", ici->nr);
-
 	mutex_lock(&list_lock);
 	list_for_each_entry(ix, &hosts, list) {
 		if (ix->nr == ici->nr) {
@@ -979,26 +978,14 @@ int soc_camera_host_register(struct soc_camera_host *ici)
 		}
 	}
 
+	dev_set_drvdata(ici->dev, ici);
+
 	list_add_tail(&ici->list, &hosts);
 	mutex_unlock(&list_lock);
 
-	ici->dev.release = dummy_release;
-
-	ret = device_register(&ici->dev);
-
-	if (ret)
-		goto edevr;
-
 	scan_add_host(ici);
 
 	return 0;
-
-edevr:
-	mutex_lock(&list_lock);
-	list_del(&ici->list);
-	mutex_unlock(&list_lock);
-
-	return ret;
 }
 EXPORT_SYMBOL(soc_camera_host_register);
 
@@ -1012,7 +999,7 @@ void soc_camera_host_unregister(struct soc_camera_host *ici)
 	list_del(&ici->list);
 
 	list_for_each_entry(icd, &devices, list) {
-		if (icd->dev.parent == &ici->dev) {
+		if (icd->dev.parent == ici->dev) {
 			device_unregister(&icd->dev);
 			/* Not before device_unregister(), .remove
 			 * needs parent to call ici->ops->remove() */
@@ -1023,7 +1010,7 @@ void soc_camera_host_unregister(struct soc_camera_host *ici)
 
 	mutex_unlock(&list_lock);
 
-	device_unregister(&ici->dev);
+	dev_set_drvdata(ici->dev, NULL);
 }
 EXPORT_SYMBOL(soc_camera_host_unregister);
 
@@ -1130,7 +1117,7 @@ int soc_camera_video_start(struct soc_camera_device *icd)
 	vdev = video_device_alloc();
 	if (!vdev)
 		goto evidallocd;
-	dev_dbg(&ici->dev, "Allocated video_device %p\n", vdev);
+	dev_dbg(ici->dev, "Allocated video_device %p\n", vdev);
 
 	strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name));
 
@@ -1174,6 +1161,57 @@ void soc_camera_video_stop(struct soc_camera_device *icd)
 }
 EXPORT_SYMBOL(soc_camera_video_stop);
 
+static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
+{
+	struct soc_camera_link *icl = pdev->dev.platform_data;
+	struct i2c_adapter *adap;
+	struct i2c_client *client;
+
+	if (!icl)
+		return -EINVAL;
+
+	adap = i2c_get_adapter(icl->i2c_adapter_id);
+	if (!adap) {
+		dev_warn(&pdev->dev, "Cannot get adapter #%d. No driver?\n",
+			 icl->i2c_adapter_id);
+		/* -ENODEV and -ENXIO do not produce an error on probe()... */
+		return -ENOENT;
+	}
+
+	icl->board_info->platform_data = icl;
+	client = i2c_new_device(adap, icl->board_info);
+	if (!client) {
+		i2c_put_adapter(adap);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, client);
+
+	return 0;
+}
+
+static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev)
+{
+	struct i2c_client *client = platform_get_drvdata(pdev);
+
+	if (!client)
+		return -ENODEV;
+
+	i2c_unregister_device(client);
+	i2c_put_adapter(client->adapter);
+
+	return 0;
+}
+
+static struct platform_driver __refdata soc_camera_pdrv = {
+	.probe	= soc_camera_pdrv_probe,
+	.remove	= __devexit_p(soc_camera_pdrv_remove),
+	.driver	= {
+		.name = "soc-camera-pdrv",
+		.owner = THIS_MODULE,
+	},
+};
+
 static int __init soc_camera_init(void)
 {
 	int ret = bus_register(&soc_camera_bus_type);
@@ -1183,8 +1221,14 @@ static int __init soc_camera_init(void)
 	if (ret)
 		goto edrvr;
 
+	ret = platform_driver_register(&soc_camera_pdrv);
+	if (ret)
+		goto epdr;
+
 	return 0;
 
+epdr:
+	driver_unregister(&ic_drv);
 edrvr:
 	bus_unregister(&soc_camera_bus_type);
 	return ret;
@@ -1192,6 +1236,7 @@ edrvr:
 
 static void __exit soc_camera_exit(void)
 {
+	platform_driver_unregister(&soc_camera_pdrv);
 	driver_unregister(&ic_drv);
 	bus_unregister(&soc_camera_bus_type);
 }
@@ -1202,3 +1247,4 @@ module_exit(soc_camera_exit);
 MODULE_DESCRIPTION("Image capture bus driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:soc-camera-pdrv");
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 1a6d39cbd6f..2e593704727 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -1137,7 +1137,7 @@ static int stk_vidioc_querybuf(struct file *filp,
 	struct stk_camera *dev = priv;
 	struct stk_sio_buffer *sbuf;
 
-	if (buf->index < 0 || buf->index >= dev->n_sbufs)
+	if (buf->index >= dev->n_sbufs)
 		return -EINVAL;
 	sbuf = dev->sio_bufs + buf->index;
 	*buf = sbuf->v4lbuf;
@@ -1154,7 +1154,7 @@ static int stk_vidioc_qbuf(struct file *filp,
 	if (buf->memory != V4L2_MEMORY_MMAP)
 		return -EINVAL;
 
-	if (buf->index < 0 || buf->index >= dev->n_sbufs)
+	if (buf->index >= dev->n_sbufs)
 		return -EINVAL;
 	sbuf = dev->sio_bufs + buf->index;
 	if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED)
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
index 005f8a46803..80f1cee23fa 100644
--- a/drivers/media/video/tda7432.c
+++ b/drivers/media/video/tda7432.c
@@ -20,20 +20,6 @@
  * loudness - set between 0 and 15 for varying degrees of loudness effect
  *
  * maxvol   - set maximium volume to +20db (1), default is 0db(0)
- *
- *
- *  Revision: 0.7 - maxvol module parm to set maximium volume 0db or +20db
- *  				store if muted so we can return it
- *  				change balance only if flaged to
- *  Revision: 0.6 - added tone controls
- *  Revision: 0.5 - Fixed odd balance problem
- *  Revision: 0.4 - added muting
- *  Revision: 0.3 - Fixed silly reversed volume controls.  :)
- *  Revision: 0.2 - Cleaned up #defines
- *			fixed volume control
- *          Added I2C_DRIVERID_TDA7432
- *			added loudness insmod control
- *  Revision: 0.1 - initial version
  */
 
 #include <linux/module.h>
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index d4a9ed45764..1585839bd0b 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -141,7 +141,6 @@ static const struct v4l2_subdev_ops tea6415c_ops = {
 	.video = &tea6415c_video_ops,
 };
 
-/* this function is called by i2c_probe */
 static int tea6415c_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index ced6eadf347..0446524d354 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -112,7 +112,6 @@ static const struct v4l2_subdev_ops tea6420_ops = {
 	.audio = &tea6420_audio_ops,
 };
 
-/* this function is called by i2c_probe */
 static int tea6420_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
diff --git a/drivers/media/video/ths7303.c b/drivers/media/video/ths7303.c
new file mode 100644
index 00000000000..21781f8a0e8
--- /dev/null
+++ b/drivers/media/video/ths7303.c
@@ -0,0 +1,151 @@
+/*
+ * ths7303- THS7303 Video Amplifier driver
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/i2c.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("TI THS7303 video amplifier driver");
+MODULE_AUTHOR("Chaithrika U S");
+MODULE_LICENSE("GPL");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+/* following function is used to set ths7303 */
+static int ths7303_setvalue(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	int err = 0;
+	u8 val;
+	struct i2c_client *client;
+
+	client = v4l2_get_subdevdata(sd);
+
+	if (std & (V4L2_STD_ALL & ~V4L2_STD_SECAM)) {
+		val = 0x02;
+		v4l2_dbg(1, debug, sd, "setting value for SDTV format\n");
+	} else {
+		val = 0x00;
+		v4l2_dbg(1, debug, sd, "disabling all channels\n");
+	}
+
+	err |= i2c_smbus_write_byte_data(client, 0x01, val);
+	err |= i2c_smbus_write_byte_data(client, 0x02, val);
+	err |= i2c_smbus_write_byte_data(client, 0x03, val);
+
+	if (err)
+		v4l2_err(sd, "write failed\n");
+
+	return err;
+}
+
+static int ths7303_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	return ths7303_setvalue(sd, norm);
+}
+
+static int ths7303_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *chip)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_THS7303, 0);
+}
+
+static const struct v4l2_subdev_video_ops ths7303_video_ops = {
+	.s_std_output	= ths7303_s_std_output,
+};
+
+static const struct v4l2_subdev_core_ops ths7303_core_ops = {
+	.g_chip_ident = ths7303_g_chip_ident,
+};
+
+static const struct v4l2_subdev_ops ths7303_ops = {
+	.core	= &ths7303_core_ops,
+	.video 	= &ths7303_video_ops,
+};
+
+static int ths7303_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct v4l2_subdev *sd;
+	v4l2_std_id std_id = V4L2_STD_NTSC;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	v4l_info(client, "chip found @ 0x%x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	if (sd == NULL)
+		return -ENOMEM;
+
+	v4l2_i2c_subdev_init(sd, client, &ths7303_ops);
+
+	return ths7303_setvalue(sd, std_id);
+}
+
+static int ths7303_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+	v4l2_device_unregister_subdev(sd);
+	kfree(sd);
+
+	return 0;
+}
+
+static const struct i2c_device_id ths7303_id[] = {
+	{"ths7303", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, ths7303_id);
+
+static struct i2c_driver ths7303_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "ths7303",
+	},
+	.probe		= ths7303_probe,
+	.remove		= ths7303_remove,
+	.id_table	= ths7303_id,
+};
+
+static int __init ths7303_init(void)
+{
+	return i2c_add_driver(&ths7303_driver);
+}
+
+static void __exit ths7303_exit(void)
+{
+	i2c_del_driver(&ths7303_driver);
+}
+
+module_init(ths7303_init);
+module_exit(ths7303_exit);
+
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 78c377a399c..537594211a9 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -309,32 +309,6 @@ static void set_freq(struct i2c_client *c, unsigned long freq)
 	}
 }
 
-static void tuner_i2c_address_check(struct tuner *t)
-{
-	if ((t->type == UNSET || t->type == TUNER_ABSENT) ||
-	    ((t->i2c->addr < 0x64) || (t->i2c->addr > 0x6f)))
-		return;
-
-	/* We already know that the XC5000 can only be located at
-	 * i2c address 0x61, 0x62, 0x63 or 0x64 */
-	if ((t->type == TUNER_XC5000) &&
-	    ((t->i2c->addr <= 0x64)) && (t->i2c->addr >= 0x61))
-		return;
-
-	tuner_warn("====================== WARNING! ======================\n");
-	tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n");
-	tuner_warn("will soon be dropped. This message indicates that your\n");
-	tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n",
-		   t->name, t->i2c->addr);
-	tuner_warn("To ensure continued support for your device, please\n");
-	tuner_warn("send a copy of this message, along with full dmesg\n");
-	tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n");
-	tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n");
-	tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n",
-		   t->i2c->adapter->name, t->i2c->addr, t->type, t->name);
-	tuner_warn("====================== WARNING! ======================\n");
-}
-
 static struct xc5000_config xc5000_cfg;
 
 static void set_type(struct i2c_client *c, unsigned int type,
@@ -438,18 +412,12 @@ static void set_type(struct i2c_client *c, unsigned int type,
 		break;
 	case TUNER_XC5000:
 	{
-		struct dvb_tuner_ops *xc_tuner_ops;
-
 		xc5000_cfg.i2c_address	  = t->i2c->addr;
 		/* if_khz will be set when the digital dvb_attach() occurs */
 		xc5000_cfg.if_khz	  = 0;
 		if (!dvb_attach(xc5000_attach,
 				&t->fe, t->i2c->adapter, &xc5000_cfg))
 			goto attach_failed;
-
-		xc_tuner_ops = &t->fe.ops.tuner_ops;
-		if (xc_tuner_ops->init)
-			xc_tuner_ops->init(&t->fe);
 		break;
 	}
 	default:
@@ -490,7 +458,6 @@ static void set_type(struct i2c_client *c, unsigned int type,
 	tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n",
 		  c->adapter->name, c->driver->driver.name, c->addr << 1, type,
 		  t->mode_mask);
-	tuner_i2c_address_check(t);
 	return;
 
 attach_failed:
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index e24a38c7fa4..ac02808106c 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -184,7 +184,7 @@ hauppauge_tuner[] =
 	{ TUNER_ABSENT,        		"Silicon TDA8275C1 8290 FM"},
 	{ TUNER_ABSENT,        		"Thompson DTT757"},
 	/* 80-89 */
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FQ1216LME MK3"},
+	{ TUNER_PHILIPS_FQ1216LME_MK3, 	"Philips FQ1216LME MK3"},
 	{ TUNER_LG_PAL_NEW_TAPC, 	"LG TAPC G701D"},
 	{ TUNER_LG_NTSC_NEW_TAPC, 	"LG TAPC H791F"},
 	{ TUNER_LG_PAL_NEW_TAPC, 	"TCL 2002MB 3"},
@@ -210,7 +210,7 @@ hauppauge_tuner[] =
 	{ TUNER_TEA5767,       		"Philips TEA5768HL FM Radio"},
 	{ TUNER_ABSENT,        		"Panasonic ENV57H12D5"},
 	{ TUNER_PHILIPS_FM1236_MK3, 	"TCL MFNM05-4"},
-	{ TUNER_ABSENT,        		"TCL MNM05-4"},
+	{ TUNER_PHILIPS_FM1236_MK3,	"TCL MNM05-4"},
 	{ TUNER_PHILIPS_FM1216ME_MK3, 	"TCL MPE05-2"},
 	{ TUNER_ABSENT,        		"TCL MQNM05-4"},
 	{ TUNER_ABSENT,        		"LG TAPC-W701D"},
@@ -229,7 +229,7 @@ hauppauge_tuner[] =
 	{ TUNER_ABSENT,        		"Samsung THPD5222FG30A"},
 	/* 120-129 */
 	{ TUNER_XC2028,        		"Xceive XC3028"},
-	{ TUNER_ABSENT,        		"Philips FQ1216LME MK5"},
+	{ TUNER_PHILIPS_FQ1216LME_MK3,	"Philips FQ1216LME MK5"},
 	{ TUNER_ABSENT,        		"Philips FQD1216LME"},
 	{ TUNER_ABSENT,        		"Conexant CX24118A"},
 	{ TUNER_ABSENT,        		"TCL DMF11WIP"},
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index 4262e60b811..3750f7fadb1 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -692,7 +692,7 @@ static int ioctl_s_routing(struct v4l2_int_device *s,
 			break;	/* Input detected */
 	}
 
-	if ((current_std == STD_INVALID) || (try_count <= 0))
+	if ((current_std == STD_INVALID) || (try_count < 0))
 		return -EINVAL;
 
 	decoder->current_std = current_std;
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index a3994764399..aa5065ea09e 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -875,10 +875,12 @@ static int tw9910_probe(struct i2c_client *client,
 	const struct tw9910_scale_ctrl *scale;
 	int                             i, ret;
 
-	info = client->dev.platform_data;
-	if (!info)
+	if (!client->dev.platform_data)
 		return -EINVAL;
 
+	info = container_of(client->dev.platform_data,
+			    struct tw9910_video_info, link);
+
 	if (!i2c_check_functionality(to_i2c_adapter(client->dev.parent),
 				     I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&client->dev,
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
index 900ec2129ca..31d57f2d09e 100644
--- a/drivers/media/video/usbvideo/konicawc.c
+++ b/drivers/media/video/usbvideo/konicawc.c
@@ -240,7 +240,7 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev
 	input_dev->dev.parent = &dev->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+	input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
 
 	error = input_register_device(cam->input);
 	if (error) {
@@ -263,7 +263,7 @@ static void konicawc_unregister_input(struct konicawc *cam)
 static void konicawc_report_buttonstat(struct konicawc *cam)
 {
 	if (cam->input) {
-		input_report_key(cam->input, BTN_0, cam->buttonsts);
+		input_report_key(cam->input, KEY_CAMERA, cam->buttonsts);
 		input_sync(cam->input);
 	}
 }
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index fd112f0b9d3..803d3e4e29a 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -103,7 +103,7 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
 	input_dev->dev.parent = &dev->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);
+	input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
 
 	error = input_register_device(cam->input);
 	if (error) {
@@ -126,7 +126,7 @@ static void qcm_unregister_input(struct qcm *cam)
 static void qcm_report_buttonstat(struct qcm *cam)
 {
 	if (cam->input) {
-		input_report_key(cam->input, BTN_0, cam->button_sts);
+		input_report_key(cam->input, KEY_CAMERA, cam->button_sts);
 		input_sync(cam->input);
 	}
 }
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index 8bc03b9e131..6ba16abeebd 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -390,10 +390,9 @@ int usbvision_scratch_alloc(struct usb_usbvision *usbvision)
 
 void usbvision_scratch_free(struct usb_usbvision *usbvision)
 {
-	if (usbvision->scratch != NULL) {
-		vfree(usbvision->scratch);
-		usbvision->scratch = NULL;
-	}
+	vfree(usbvision->scratch);
+	usbvision->scratch = NULL;
+
 }
 
 /*
@@ -506,10 +505,9 @@ int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
  */
 void usbvision_decompress_free(struct usb_usbvision *usbvision)
 {
-	if (usbvision->IntraFrameBuffer != NULL) {
-		vfree(usbvision->IntraFrameBuffer);
-		usbvision->IntraFrameBuffer = NULL;
-	}
+	vfree(usbvision->IntraFrameBuffer);
+	usbvision->IntraFrameBuffer = NULL;
+
 }
 
 /************************************************************
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index d7056a5b7f9..90b58914f98 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -541,7 +541,7 @@ static int vidioc_enum_input (struct file *file, void *priv,
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int chan;
 
-	if ((vi->index >= usbvision->video_inputs) || (vi->index < 0) )
+	if (vi->index >= usbvision->video_inputs)
 		return -EINVAL;
 	if (usbvision->have_tuner) {
 		chan = vi->index;
@@ -1794,7 +1794,7 @@ static struct usb_driver usbvision_driver = {
 	.name		= "usbvision",
 	.id_table	= usbvision_table,
 	.probe		= usbvision_probe,
-	.disconnect	= usbvision_disconnect
+	.disconnect	= __devexit_p(usbvision_disconnect),
 };
 
 /*
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 0d7e38d6ff6..36a6ba92df2 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1372,21 +1372,19 @@ end:
 }
 
 /*
- * Prune an entity of its bogus controls. This currently includes processing
- * unit auto controls for which no corresponding manual control is available.
- * Such auto controls make little sense if any, and are known to crash at
- * least the SiGma Micro webcam.
+ * Prune an entity of its bogus controls using a blacklist. Bogus controls
+ * are currently the ones that crash the camera or unconditionally return an
+ * error when queried.
  */
 static void
-uvc_ctrl_prune_entity(struct uvc_entity *entity)
+uvc_ctrl_prune_entity(struct uvc_device *dev, struct uvc_entity *entity)
 {
 	static const struct {
-		u8 idx_manual;
-		u8 idx_auto;
+		struct usb_device_id id;
+		u8 index;
 	} blacklist[] = {
-		{ 2, 11 }, /* Hue */
-		{ 6, 12 }, /* White Balance Temperature */
-		{ 7, 13 }, /* White Balance Component */
+		{ { USB_DEVICE(0x1c4f, 0x3000) }, 6 }, /* WB Temperature */
+		{ { USB_DEVICE(0x5986, 0x0241) }, 2 }, /* Hue */
 	};
 
 	u8 *controls;
@@ -1400,19 +1398,17 @@ uvc_ctrl_prune_entity(struct uvc_entity *entity)
 	size = entity->processing.bControlSize;
 
 	for (i = 0; i < ARRAY_SIZE(blacklist); ++i) {
-		if (blacklist[i].idx_auto >= 8 * size ||
-		    blacklist[i].idx_manual >= 8 * size)
+		if (!usb_match_id(dev->intf, &blacklist[i].id))
 			continue;
 
-		if (!uvc_test_bit(controls, blacklist[i].idx_auto) ||
-		     uvc_test_bit(controls, blacklist[i].idx_manual))
+		if (blacklist[i].index >= 8 * size ||
+		    !uvc_test_bit(controls, blacklist[i].index))
 			continue;
 
-		uvc_trace(UVC_TRACE_CONTROL, "Auto control %u/%u has no "
-			"matching manual control, removing it.\n", entity->id,
-			blacklist[i].idx_auto);
+		uvc_trace(UVC_TRACE_CONTROL, "%u/%u control is black listed, "
+			"removing it.\n", entity->id, blacklist[i].index);
 
-		uvc_clear_bit(controls, blacklist[i].idx_auto);
+		uvc_clear_bit(controls, blacklist[i].index);
 	}
 }
 
@@ -1442,8 +1438,7 @@ int uvc_ctrl_init_device(struct uvc_device *dev)
 			bControlSize = entity->camera.bControlSize;
 		}
 
-		if (dev->quirks & UVC_QUIRK_PRUNE_CONTROLS)
-			uvc_ctrl_prune_entity(entity);
+		uvc_ctrl_prune_entity(dev, entity);
 
 		for (i = 0; i < bControlSize; ++i)
 			ncontrols += hweight8(bmControls[i]);
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 507dc85646b..89927b7aec2 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -289,10 +289,8 @@ static int uvc_parse_format(struct uvc_device *dev,
 	struct uvc_format_desc *fmtdesc;
 	struct uvc_frame *frame;
 	const unsigned char *start = buffer;
-	unsigned char *_buffer;
 	unsigned int interval;
 	unsigned int i, n;
-	int _buflen;
 	__u8 ftype;
 
 	format->type = buffer[2];
@@ -303,7 +301,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 	case VS_FORMAT_FRAME_BASED:
 		n = buffer[2] == VS_FORMAT_UNCOMPRESSED ? 27 : 28;
 		if (buflen < n) {
-			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
 			       "interface %d FORMAT error\n",
 			       dev->udev->devnum,
 			       alts->desc.bInterfaceNumber);
@@ -338,7 +336,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 
 	case VS_FORMAT_MJPEG:
 		if (buflen < 11) {
-			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
 			       "interface %d FORMAT error\n",
 			       dev->udev->devnum,
 			       alts->desc.bInterfaceNumber);
@@ -354,7 +352,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 
 	case VS_FORMAT_DV:
 		if (buflen < 9) {
-			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
 			       "interface %d FORMAT error\n",
 			       dev->udev->devnum,
 			       alts->desc.bInterfaceNumber);
@@ -372,7 +370,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 			strlcpy(format->name, "HD-DV", sizeof format->name);
 			break;
 		default:
-			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
 			       "interface %d: unknown DV format %u\n",
 			       dev->udev->devnum,
 			       alts->desc.bInterfaceNumber, buffer[8]);
@@ -401,7 +399,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 	case VS_FORMAT_STREAM_BASED:
 		/* Not supported yet. */
 	default:
-		uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+		uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
 		       "interface %d unsupported format %u\n",
 		       dev->udev->devnum, alts->desc.bInterfaceNumber,
 		       buffer[2]);
@@ -413,20 +411,11 @@ static int uvc_parse_format(struct uvc_device *dev,
 	buflen -= buffer[0];
 	buffer += buffer[0];
 
-	/* Count the number of frame descriptors to test the bFrameIndex
-	 * field when parsing the descriptors. We can't rely on the
-	 * bNumFrameDescriptors field as some cameras don't initialize it
-	 * properly.
-	 */
-	for (_buflen = buflen, _buffer = buffer;
-	     _buflen > 2 && _buffer[2] == ftype;
-	     _buflen -= _buffer[0], _buffer += _buffer[0])
-		format->nframes++;
-
 	/* Parse the frame descriptors. Only uncompressed, MJPEG and frame
 	 * based formats have frame descriptors.
 	 */
 	while (buflen > 2 && buffer[2] == ftype) {
+		frame = &format->frame[format->nframes];
 		if (ftype != VS_FRAME_FRAME_BASED)
 			n = buflen > 25 ? buffer[25] : 0;
 		else
@@ -435,22 +424,12 @@ static int uvc_parse_format(struct uvc_device *dev,
 		n = n ? n : 3;
 
 		if (buflen < 26 + 4*n) {
-			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
 			       "interface %d FRAME error\n", dev->udev->devnum,
 			       alts->desc.bInterfaceNumber);
 			return -EINVAL;
 		}
 
-		if (buffer[3] - 1 >= format->nframes) {
-			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
-			       "interface %d frame index %u out of range\n",
-			       dev->udev->devnum, alts->desc.bInterfaceNumber,
-			       buffer[3]);
-			return -EINVAL;
-		}
-
-		frame = &format->frame[buffer[3] - 1];
-
 		frame->bFrameIndex = buffer[3];
 		frame->bmCapabilities = buffer[4];
 		frame->wWidth = get_unaligned_le16(&buffer[5]);
@@ -507,6 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 			10000000/frame->dwDefaultFrameInterval,
 			(100000000/frame->dwDefaultFrameInterval)%10);
 
+		format->nframes++;
 		buflen -= buffer[0];
 		buffer += buffer[0];
 	}
@@ -518,7 +498,7 @@ static int uvc_parse_format(struct uvc_device *dev,
 
 	if (buflen > 2 && buffer[2] == VS_COLORFORMAT) {
 		if (buflen < 6) {
-			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming"
+			uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
 			       "interface %d COLORFORMAT error\n",
 			       dev->udev->devnum,
 			       alts->desc.bInterfaceNumber);
@@ -664,7 +644,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
 	_buflen = buflen;
 
 	/* Count the format and frame descriptors. */
-	while (_buflen > 2) {
+	while (_buflen > 2 && _buffer[1] == CS_INTERFACE) {
 		switch (_buffer[2]) {
 		case VS_FORMAT_UNCOMPRESSED:
 		case VS_FORMAT_MJPEG:
@@ -729,7 +709,7 @@ static int uvc_parse_streaming(struct uvc_device *dev,
 	streaming->nformats = nformats;
 
 	/* Parse the format descriptors. */
-	while (buflen > 2) {
+	while (buflen > 2 && buffer[1] == CS_INTERFACE) {
 		switch (buffer[2]) {
 		case VS_FORMAT_UNCOMPRESSED:
 		case VS_FORMAT_MJPEG:
@@ -1316,7 +1296,7 @@ static int uvc_scan_chain_forward(struct uvc_video_device *video,
 			continue;
 
 		if (forward->extension.bNrInPins != 1) {
-			uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has"
+			uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has "
 				"more than 1 input pin.\n", entity->id);
 			return -1;
 		}
@@ -1614,6 +1594,7 @@ static int uvc_probe(struct usb_interface *intf,
 	INIT_LIST_HEAD(&dev->entities);
 	INIT_LIST_HEAD(&dev->streaming);
 	kref_init(&dev->kref);
+	atomic_set(&dev->users, 0);
 
 	dev->udev = usb_get_dev(udev);
 	dev->intf = usb_get_intf(intf);
@@ -1927,7 +1908,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
-	/* Lenovo Thinkpad SL500 */
+	/* Lenovo Thinkpad SL400/SL500 */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
 	  .idVendor		= 0x17ef,
@@ -1936,6 +1917,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_STREAM_NO_FID },
+	/* Aveo Technology USB 2.0 Camera */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x1871,
+	  .idProduct		= 0x0306,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_EXTRAFIELDS },
 	/* Ecamm Pico iMage */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
@@ -1945,6 +1935,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_EXTRAFIELDS },
+	/* FSC WebCam V30S */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x18ec,
+	  .idProduct		= 0x3288,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_PROBE_MINMAX },
 	/* Bodelin ProScopeHR */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_DEV_HI
@@ -1965,8 +1964,7 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX
-				| UVC_QUIRK_IGNORE_SELECTOR_UNIT
-				| UVC_QUIRK_PRUNE_CONTROLS },
+				| UVC_QUIRK_IGNORE_SELECTOR_UNIT },
 	/* Generic USB Video Class */
 	{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
 	{}
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index 0155752e4a5..f854698c406 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -172,6 +172,20 @@ int uvc_free_buffers(struct uvc_video_queue *queue)
 	return 0;
 }
 
+/*
+ * Check if buffers have been allocated.
+ */
+int uvc_queue_allocated(struct uvc_video_queue *queue)
+{
+	int allocated;
+
+	mutex_lock(&queue->mutex);
+	allocated = queue->count != 0;
+	mutex_unlock(&queue->mutex);
+
+	return allocated;
+}
+
 static void __uvc_query_buffer(struct uvc_buffer *buf,
 		struct v4l2_buffer *v4l2_buf)
 {
diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c
index 21d87124986..f152a990386 100644
--- a/drivers/media/video/uvc/uvc_status.c
+++ b/drivers/media/video/uvc/uvc_status.c
@@ -194,7 +194,7 @@ int uvc_status_init(struct uvc_device *dev)
 		dev->status, UVC_MAX_STATUS_SIZE, uvc_status_complete,
 		dev, interval);
 
-	return usb_submit_urb(dev->int_urb, GFP_KERNEL);
+	return 0;
 }
 
 void uvc_status_cleanup(struct uvc_device *dev)
@@ -205,15 +205,30 @@ void uvc_status_cleanup(struct uvc_device *dev)
 	uvc_input_cleanup(dev);
 }
 
-int uvc_status_suspend(struct uvc_device *dev)
+int uvc_status_start(struct uvc_device *dev)
+{
+	if (dev->int_urb == NULL)
+		return 0;
+
+	return usb_submit_urb(dev->int_urb, GFP_KERNEL);
+}
+
+void uvc_status_stop(struct uvc_device *dev)
 {
 	usb_kill_urb(dev->int_urb);
+}
+
+int uvc_status_suspend(struct uvc_device *dev)
+{
+	if (atomic_read(&dev->users))
+		usb_kill_urb(dev->int_urb);
+
 	return 0;
 }
 
 int uvc_status_resume(struct uvc_device *dev)
 {
-	if (dev->int_urb == NULL)
+	if (dev->int_urb == NULL || atomic_read(&dev->users) == 0)
 		return 0;
 
 	return usb_submit_urb(dev->int_urb, GFP_NOIO);
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 2a80caa54fb..5e77cad2969 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -46,6 +46,8 @@ static int uvc_v4l2_query_menu(struct uvc_video_device *video,
 	struct uvc_menu_info *menu_info;
 	struct uvc_control_mapping *mapping;
 	struct uvc_control *ctrl;
+	u32 index = query_menu->index;
+	u32 id = query_menu->id;
 
 	ctrl = uvc_find_control(video, query_menu->id, &mapping);
 	if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU)
@@ -54,6 +56,10 @@ static int uvc_v4l2_query_menu(struct uvc_video_device *video,
 	if (query_menu->index >= mapping->menu_count)
 		return -EINVAL;
 
+	memset(query_menu, 0, sizeof(*query_menu));
+	query_menu->id = id;
+	query_menu->index = index;
+
 	menu_info = &mapping->menu_info[query_menu->index];
 	strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
 	return 0;
@@ -245,7 +251,7 @@ static int uvc_v4l2_set_format(struct uvc_video_device *video,
 	if (fmt->type != video->streaming->type)
 		return -EINVAL;
 
-	if (uvc_queue_streaming(&video->queue))
+	if (uvc_queue_allocated(&video->queue))
 		return -EBUSY;
 
 	ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame);
@@ -433,6 +439,15 @@ static int uvc_v4l2_open(struct file *file)
 		goto done;
 	}
 
+	if (atomic_inc_return(&video->dev->users) == 1) {
+		if ((ret = uvc_status_start(video->dev)) < 0) {
+			usb_autopm_put_interface(video->dev->intf);
+			atomic_dec(&video->dev->users);
+			kfree(handle);
+			goto done;
+		}
+	}
+
 	handle->device = video;
 	handle->state = UVC_HANDLE_PASSIVE;
 	file->private_data = handle;
@@ -467,6 +482,9 @@ static int uvc_v4l2_release(struct file *file)
 	kfree(handle);
 	file->private_data = NULL;
 
+	if (atomic_dec_return(&video->dev->users) == 0)
+		uvc_status_stop(video->dev);
+
 	usb_autopm_put_interface(video->dev->intf);
 	kref_put(&video->dev->kref, uvc_delete);
 	return 0;
@@ -512,7 +530,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		memset(&xctrl, 0, sizeof xctrl);
 		xctrl.id = ctrl->id;
 
-		uvc_ctrl_begin(video);
+	       ret = uvc_ctrl_begin(video);
+	       if (ret < 0)
+			return ret;
+
 		ret = uvc_ctrl_get(video, &xctrl);
 		uvc_ctrl_rollback(video);
 		if (ret >= 0)
@@ -529,7 +550,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		xctrl.id = ctrl->id;
 		xctrl.value = ctrl->value;
 
-		uvc_ctrl_begin(video);
+	       ret = uvc_ctrl_begin(video);
+	       if (ret < 0)
+			return ret;
+
 		ret = uvc_ctrl_set(video, &xctrl);
 		if (ret < 0) {
 			uvc_ctrl_rollback(video);
@@ -548,7 +572,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		struct v4l2_ext_control *ctrl = ctrls->controls;
 		unsigned int i;
 
-		uvc_ctrl_begin(video);
+	       ret = uvc_ctrl_begin(video);
+	       if (ret < 0)
+			return ret;
+
 		for (i = 0; i < ctrls->count; ++ctrl, ++i) {
 			ret = uvc_ctrl_get(video, ctrl);
 			if (ret < 0) {
@@ -648,7 +675,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 	case VIDIOC_S_INPUT:
 	{
-		u8 input = *(u32 *)arg + 1;
+		u32 input = *(u32 *)arg + 1;
 
 		if ((ret = uvc_acquire_privileges(handle)) < 0)
 			return ret;
@@ -660,7 +687,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 			break;
 		}
 
-		if (input > video->selector->selector.bNrInPins)
+		if (input == 0 || input > video->selector->selector.bNrInPins)
 			return -EINVAL;
 
 		return uvc_query_ctrl(video->dev, SET_CUR, video->selector->id,
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 6ce974d7362..01b633c7348 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -65,7 +65,8 @@ static void uvc_fixup_video_ctrl(struct uvc_video_device *video,
 	struct uvc_streaming_control *ctrl)
 {
 	struct uvc_format *format;
-	struct uvc_frame *frame;
+	struct uvc_frame *frame = NULL;
+	unsigned int i;
 
 	if (ctrl->bFormatIndex <= 0 ||
 	    ctrl->bFormatIndex > video->streaming->nformats)
@@ -73,11 +74,15 @@ static void uvc_fixup_video_ctrl(struct uvc_video_device *video,
 
 	format = &video->streaming->format[ctrl->bFormatIndex - 1];
 
-	if (ctrl->bFrameIndex <= 0 ||
-	    ctrl->bFrameIndex > format->nframes)
-		return;
+	for (i = 0; i < format->nframes; ++i) {
+		if (format->frame[i].bFrameIndex == ctrl->bFrameIndex) {
+			frame = &format->frame[i];
+			break;
+		}
+	}
 
-	frame = &format->frame[ctrl->bFrameIndex - 1];
+	if (frame == NULL)
+		return;
 
 	if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) ||
 	     (ctrl->dwMaxVideoFrameSize == 0 &&
@@ -1089,7 +1094,7 @@ int uvc_video_init(struct uvc_video_device *video)
 	/* Zero bFrameIndex might be correct. Stream-based formats (including
 	 * MPEG-2 TS and DV) do not support frames but have a dummy frame
 	 * descriptor with bFrameIndex set to zero. If the default frame
-	 * descriptor is not found, use the first avalable frame.
+	 * descriptor is not found, use the first available frame.
 	 */
 	for (i = format->nframes; i > 0; --i) {
 		frame = &format->frame[i-1];
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index e5014e668f9..3c78d3c1e4c 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -313,7 +313,6 @@ struct uvc_xu_control {
 #define UVC_QUIRK_BUILTIN_ISIGHT	0x00000008
 #define UVC_QUIRK_STREAM_NO_FID		0x00000010
 #define UVC_QUIRK_IGNORE_SELECTOR_UNIT	0x00000020
-#define UVC_QUIRK_PRUNE_CONTROLS	0x00000040
 #define UVC_QUIRK_FIX_BANDWIDTH		0x00000080
 
 /* Format flags */
@@ -634,6 +633,7 @@ struct uvc_device {
 	enum uvc_device_state state;
 	struct kref kref;
 	struct list_head list;
+	atomic_t users;
 
 	/* Video control interface */
 	__u16 uvc_version;
@@ -747,6 +747,7 @@ extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 		struct uvc_buffer *buf);
 extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
 		struct file *file, poll_table *wait);
+extern int uvc_queue_allocated(struct uvc_video_queue *queue);
 static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
 {
 	return queue->flags & UVC_QUEUE_STREAMING;
@@ -770,6 +771,8 @@ extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit,
 /* Status */
 extern int uvc_status_init(struct uvc_device *dev);
 extern void uvc_status_cleanup(struct uvc_device *dev);
+extern int uvc_status_start(struct uvc_device *dev);
+extern void uvc_status_stop(struct uvc_device *dev);
 extern int uvc_status_suspend(struct uvc_device *dev);
 extern int uvc_status_resume(struct uvc_device *dev);
 
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index f576ef66b80..f96475626da 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -746,6 +746,7 @@ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
 		const struct v4l2_subdev_ops *ops)
 {
 	v4l2_subdev_init(sd, ops);
+	sd->flags |= V4L2_SUBDEV_FL_IS_I2C;
 	/* the owner is the same as the i2c_client's driver owner */
 	sd->owner = client->driver->driver.owner;
 	/* i2c_client and v4l2_subdev point to one another */
@@ -897,8 +898,7 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type)
 	};
 	static const unsigned short tv_addrs[] = {
 		0x42, 0x43, 0x4a, 0x4b,		/* tda8290 */
-		0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
-		0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
+		0x60, 0x61, 0x62, 0x63, 0x64,
 		I2C_CLIENT_END
 	};
 
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 94aa485ade5..0d06e7cbd5b 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -49,6 +49,22 @@ int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev)
 }
 EXPORT_SYMBOL_GPL(v4l2_device_register);
 
+int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename,
+						atomic_t *instance)
+{
+	int num = atomic_inc_return(instance) - 1;
+	int len = strlen(basename);
+
+	if (basename[len - 1] >= '0' && basename[len - 1] <= '9')
+		snprintf(v4l2_dev->name, sizeof(v4l2_dev->name),
+				"%s-%d", basename, num);
+	else
+		snprintf(v4l2_dev->name, sizeof(v4l2_dev->name),
+				"%s%d", basename, num);
+	return num;
+}
+EXPORT_SYMBOL_GPL(v4l2_device_set_name);
+
 void v4l2_device_disconnect(struct v4l2_device *v4l2_dev)
 {
 	if (v4l2_dev->dev) {
@@ -67,8 +83,21 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev)
 	v4l2_device_disconnect(v4l2_dev);
 
 	/* Unregister subdevs */
-	list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list)
+	list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) {
 		v4l2_device_unregister_subdev(sd);
+#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
+		if (sd->flags & V4L2_SUBDEV_FL_IS_I2C) {
+			struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+			/* We need to unregister the i2c client explicitly.
+			   We cannot rely on i2c_del_adapter to always
+			   unregister clients for us, since if the i2c bus
+			   is a platform bus, then it is never deleted. */
+			if (client)
+				i2c_unregister_device(client);
+		}
+#endif
+	}
 }
 EXPORT_SYMBOL_GPL(v4l2_device_unregister);
 
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index b7b05842cf2..f1ccf98c0a6 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -118,6 +118,7 @@ void videobuf_queue_core_init(struct videobuf_queue *q,
 			 void *priv,
 			 struct videobuf_qtype_ops *int_ops)
 {
+	BUG_ON(!q);
 	memset(q, 0, sizeof(*q));
 	q->irqlock   = irqlock;
 	q->dev       = dev;
@@ -439,6 +440,7 @@ int videobuf_reqbufs(struct videobuf_queue *q,
 	}
 
 	req->count = retval;
+	retval = 0;
 
  done:
 	mutex_unlock(&q->vb_lock);
@@ -454,7 +456,7 @@ int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b)
 		dprintk(1, "querybuf: Wrong type.\n");
 		goto done;
 	}
-	if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) {
+	if (unlikely(b->index >= VIDEO_MAX_FRAME)) {
 		dprintk(1, "querybuf: index out of range.\n");
 		goto done;
 	}
@@ -495,7 +497,7 @@ int videobuf_qbuf(struct videobuf_queue *q,
 		dprintk(1, "qbuf: Wrong type.\n");
 		goto done;
 	}
-	if (b->index < 0 || b->index >= VIDEO_MAX_FRAME) {
+	if (b->index >= VIDEO_MAX_FRAME) {
 		dprintk(1, "qbuf: index out of range.\n");
 		goto done;
 	}
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index 6109fb5f34e..d09ce83a942 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/pagemap.h>
 #include <linux/dma-mapping.h>
 #include <media/videobuf-dma-contig.h>
 
@@ -25,6 +26,7 @@ struct videobuf_dma_contig_memory {
 	void *vaddr;
 	dma_addr_t dma_handle;
 	unsigned long size;
+	int is_userptr;
 };
 
 #define MAGIC_DC_MEM 0x0733ac61
@@ -108,6 +110,82 @@ static struct vm_operations_struct videobuf_vm_ops = {
 	.close    = videobuf_vm_close,
 };
 
+/**
+ * videobuf_dma_contig_user_put() - reset pointer to user space buffer
+ * @mem: per-buffer private videobuf-dma-contig data
+ *
+ * This function resets the user space pointer
+ */
+static void videobuf_dma_contig_user_put(struct videobuf_dma_contig_memory *mem)
+{
+	mem->is_userptr = 0;
+	mem->dma_handle = 0;
+	mem->size = 0;
+}
+
+/**
+ * videobuf_dma_contig_user_get() - setup user space memory pointer
+ * @mem: per-buffer private videobuf-dma-contig data
+ * @vb: video buffer to map
+ *
+ * This function validates and sets up a pointer to user space memory.
+ * Only physically contiguous pfn-mapped memory is accepted.
+ *
+ * Returns 0 if successful.
+ */
+static int videobuf_dma_contig_user_get(struct videobuf_dma_contig_memory *mem,
+					struct videobuf_buffer *vb)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	unsigned long prev_pfn, this_pfn;
+	unsigned long pages_done, user_address;
+	int ret;
+
+	mem->size = PAGE_ALIGN(vb->size);
+	mem->is_userptr = 0;
+	ret = -EINVAL;
+
+	down_read(&mm->mmap_sem);
+
+	vma = find_vma(mm, vb->baddr);
+	if (!vma)
+		goto out_up;
+
+	if ((vb->baddr + mem->size) > vma->vm_end)
+		goto out_up;
+
+	pages_done = 0;
+	prev_pfn = 0; /* kill warning */
+	user_address = vb->baddr;
+
+	while (pages_done < (mem->size >> PAGE_SHIFT)) {
+		ret = follow_pfn(vma, user_address, &this_pfn);
+		if (ret)
+			break;
+
+		if (pages_done == 0)
+			mem->dma_handle = this_pfn << PAGE_SHIFT;
+		else if (this_pfn != (prev_pfn + 1))
+			ret = -EFAULT;
+
+		if (ret)
+			break;
+
+		prev_pfn = this_pfn;
+		user_address += PAGE_SIZE;
+		pages_done++;
+	}
+
+	if (!ret)
+		mem->is_userptr = 1;
+
+ out_up:
+	up_read(&current->mm->mmap_sem);
+
+	return ret;
+}
+
 static void *__videobuf_alloc(size_t size)
 {
 	struct videobuf_dma_contig_memory *mem;
@@ -154,12 +232,11 @@ static int __videobuf_iolock(struct videobuf_queue *q,
 	case V4L2_MEMORY_USERPTR:
 		dev_dbg(q->dev, "%s memory method USERPTR\n", __func__);
 
-		/* The only USERPTR currently supported is the one needed for
-		   read() method.
-		 */
+		/* handle pointer from user space */
 		if (vb->baddr)
-			return -EINVAL;
+			return videobuf_dma_contig_user_get(mem, vb);
 
+		/* allocate memory for the read() method */
 		mem->size = PAGE_ALIGN(vb->size);
 		mem->vaddr = dma_alloc_coherent(q->dev, mem->size,
 						&mem->dma_handle, GFP_KERNEL);
@@ -182,19 +259,6 @@ static int __videobuf_iolock(struct videobuf_queue *q,
 	return 0;
 }
 
-static int __videobuf_sync(struct videobuf_queue *q,
-			   struct videobuf_buffer *buf)
-{
-	struct videobuf_dma_contig_memory *mem = buf->priv;
-
-	BUG_ON(!mem);
-	MAGIC_CHECK(mem->magic, MAGIC_DC_MEM);
-
-	dma_sync_single_for_cpu(q->dev, mem->dma_handle, mem->size,
-				DMA_FROM_DEVICE);
-	return 0;
-}
-
 static int __videobuf_mmap_free(struct videobuf_queue *q)
 {
 	unsigned int i;
@@ -356,7 +420,6 @@ static struct videobuf_qtype_ops qops = {
 
 	.alloc        = __videobuf_alloc,
 	.iolock       = __videobuf_iolock,
-	.sync         = __videobuf_sync,
 	.mmap_free    = __videobuf_mmap_free,
 	.mmap_mapper  = __videobuf_mmap_mapper,
 	.video_copy_to_user = __videobuf_copy_to_user,
@@ -400,7 +463,7 @@ void videobuf_dma_contig_free(struct videobuf_queue *q,
 	   So, it should free memory only if the memory were allocated for
 	   read() operation.
 	 */
-	if ((buf->memory != V4L2_MEMORY_USERPTR) || buf->baddr)
+	if (buf->memory != V4L2_MEMORY_USERPTR)
 		return;
 
 	if (!mem)
@@ -408,6 +471,13 @@ void videobuf_dma_contig_free(struct videobuf_queue *q,
 
 	MAGIC_CHECK(mem->magic, MAGIC_DC_MEM);
 
+	/* handle user space pointer case */
+	if (buf->baddr) {
+		videobuf_dma_contig_user_put(mem);
+		return;
+	}
+
+	/* read() method */
 	dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
 	mem->vaddr = NULL;
 }
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index da1790e57a8..a8dd22ace3f 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -58,9 +58,10 @@ videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages)
 	struct page *pg;
 	int i;
 
-	sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
+	sglist = vmalloc(nr_pages * sizeof(*sglist));
 	if (NULL == sglist)
 		return NULL;
+	memset(sglist, 0, nr_pages * sizeof(*sglist));
 	sg_init_table(sglist, nr_pages);
 	for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
 		pg = vmalloc_to_page(virt);
@@ -72,7 +73,7 @@ videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages)
 	return sglist;
 
  err:
-	kfree(sglist);
+	vfree(sglist);
 	return NULL;
 }
 
@@ -84,7 +85,7 @@ videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset)
 
 	if (NULL == pages[0])
 		return NULL;
-	sglist = kmalloc(nr_pages * sizeof(*sglist), GFP_KERNEL);
+	sglist = vmalloc(nr_pages * sizeof(*sglist));
 	if (NULL == sglist)
 		return NULL;
 	sg_init_table(sglist, nr_pages);
@@ -104,12 +105,12 @@ videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset)
 
  nopage:
 	dprintk(2,"sgl: oops - no page\n");
-	kfree(sglist);
+	vfree(sglist);
 	return NULL;
 
  highmem:
 	dprintk(2,"sgl: oops - highmem page\n");
-	kfree(sglist);
+	vfree(sglist);
 	return NULL;
 }
 
@@ -230,7 +231,7 @@ int videobuf_dma_map(struct videobuf_queue* q, struct videobuf_dmabuf *dma)
 						(dma->vmalloc,dma->nr_pages);
 	}
 	if (dma->bus_addr) {
-		dma->sglist = kmalloc(sizeof(struct scatterlist), GFP_KERNEL);
+		dma->sglist = vmalloc(sizeof(*dma->sglist));
 		if (NULL != dma->sglist) {
 			dma->sglen  = 1;
 			sg_dma_address(&dma->sglist[0]) = dma->bus_addr & PAGE_MASK;
@@ -248,10 +249,10 @@ int videobuf_dma_map(struct videobuf_queue* q, struct videobuf_dmabuf *dma)
 		if (0 == dma->sglen) {
 			printk(KERN_WARNING
 			       "%s: videobuf_map_sg failed\n",__func__);
-			kfree(dma->sglist);
+			vfree(dma->sglist);
 			dma->sglist = NULL;
 			dma->sglen = 0;
-			return -EIO;
+			return -ENOMEM;
 		}
 	}
 	return 0;
@@ -274,7 +275,7 @@ int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma)
 
 	dma_unmap_sg(q->dev, dma->sglist, dma->nr_pages, dma->direction);
 
-	kfree(dma->sglist);
+	vfree(dma->sglist);
 	dma->sglist = NULL;
 	dma->sglen = 0;
 	return 0;
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 43e0998adb5..97b082fe447 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -868,9 +868,9 @@ static void vino_sync_buffer(struct vino_framebuffer *fb)
 	dprintk("vino_sync_buffer():\n");
 
 	for (i = 0; i < fb->desc_table.page_count; i++)
-		dma_sync_single(NULL,
-				fb->desc_table.dma_cpu[VINO_PAGE_RATIO * i],
-				PAGE_SIZE, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(NULL,
+					fb->desc_table.dma_cpu[VINO_PAGE_RATIO * i],
+					PAGE_SIZE, DMA_FROM_DEVICE);
 }
 
 /* Framebuffer fifo functions (need to be locked externally) */
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index ea6c577b0eb..03dc2f3cf84 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -1022,7 +1022,7 @@ zr36057_init (struct zoran *zr)
 	zr->vbuf_bytesperline = 0;
 
 	/* Avoid nonsense settings from user for default input/norm */
-	if (default_norm < 0 && default_norm > 2)
+	if (default_norm < 0 || default_norm > 2)
 		default_norm = 0;
 	if (default_norm == 0) {
 		zr->norm = V4L2_STD_PAL;
@@ -1477,7 +1477,7 @@ static struct pci_driver zoran_driver = {
 	.name = "zr36067",
 	.id_table = zr36067_pci_tbl,
 	.probe = zoran_probe,
-	.remove = zoran_remove,
+	.remove = __devexit_p(zoran_remove),
 };
 
 static int __init zoran_init(void)
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index ac169c9eb18..fc976f42f43 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -882,9 +882,11 @@ static void zr364xx_disconnect(struct usb_interface *intf)
 		video_unregister_device(cam->vdev);
 	cam->vdev = NULL;
 	kfree(cam->buffer);
-	if (cam->framebuf)
-		vfree(cam->framebuf);
+	cam->buffer = NULL;
+	vfree(cam->framebuf);
+	cam->framebuf = NULL;
 	kfree(cam);
+	cam = NULL;
 }
 
 
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 693e4b51135..fa9249b4971 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -130,7 +130,7 @@ mpi_ioc.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *                      New format for FWVersion and ProductId in
  *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ *  08-31-01  01.02.02  Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
  *                      related structure and defines.
  *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
  *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -190,7 +190,7 @@ mpi_ioc.h
  *  10-11-06  01.05.12  Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
  *                      Added MaxInitiators field to PortFacts reply.
  *                      Added SAS Device Status Change ReasonCode for
- *                      asynchronous notificaiton.
+ *                      asynchronous notification.
  *                      Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
  *                      data structure.
  *                      Added new ImageType values for FWDownload and FWUpload
@@ -623,7 +623,7 @@ mpi_fc.h
  *  11-02-00  01.01.01  Original release for post 1.0 work
  *  12-04-00  01.01.02  Added messages for Common Transport Send and
  *                      Primitive Send.
- *  01-09-01  01.01.03  Modifed some of the new flags to have an MPI prefix
+ *  01-09-01  01.01.03  Modified some of the new flags to have an MPI prefix
  *                      and modified the FcPrimitiveSend flags.
  *  01-25-01  01.01.04  Move InitiatorIndex in LinkServiceRsp reply to a larger
  *                      field.
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 44b93150445..0df065275cd 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1023,8 +1023,7 @@ mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
 }
 
 /**
- *	mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr
- *	(1078 workaround).
+ *	mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
  *	@pAddr: virtual address for SGE
  *	@flagslength: SGE flags and data transfer length
  *	@dma_addr: Physical address
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index c2804f26cb4..a9e48e28b1d 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -703,7 +703,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 
 		printk (KERN_ERR "%s: no tx context available: %u\n",
 			__func__, priv->mpt_txfidx_tail);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	mf = mpt_get_msg_frame(LanCtx, mpt_dev);
@@ -713,7 +713,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 
 		printk (KERN_ERR "%s: Unable to alloc request frame\n",
 			__func__);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	ctx = priv->mpt_txfidx[priv->mpt_txfidx_tail--];
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 024e8305bcf..8440f78f696 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2675,8 +2675,8 @@ mptscsih_timer_expired(unsigned long data)
 /**
  *	mptscsih_get_completion_code -
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@reply:
- *	@cmd:
+ *	@req: Pointer to original MPT request frame
+ *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
  *
  **/
 static int
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 386da1566fc..cb73051e43d 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -35,7 +35,7 @@ struct pasic3_data {
  */
 void pasic3_write_register(struct device *dev, u32 reg, u8 val)
 {
-	struct pasic3_data *asic = dev->driver_data;
+	struct pasic3_data *asic = dev_get_drvdata(dev);
 	int bus_shift = asic->bus_shift;
 	void __iomem *addr = asic->mapping + (REG_ADDR << bus_shift);
 	void __iomem *data = asic->mapping + (REG_DATA << bus_shift);
@@ -50,7 +50,7 @@ EXPORT_SYMBOL(pasic3_write_register); /* for leds-pasic3 */
  */
 u8 pasic3_read_register(struct device *dev, u32 reg)
 {
-	struct pasic3_data *asic = dev->driver_data;
+	struct pasic3_data *asic = dev_get_drvdata(dev);
 	int bus_shift = asic->bus_shift;
 	void __iomem *addr = asic->mapping + (REG_ADDR << bus_shift);
 	void __iomem *data = asic->mapping + (REG_DATA << bus_shift);
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 11a6248cc1c..082c197ab9b 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -618,7 +618,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 
 		pdev->dev.parent = pcf->dev;
 		pdev->dev.platform_data = &pdata->reg_init_data[i];
-		pdev->dev.driver_data = pcf;
+		dev_set_drvdata(&pdev->dev, pcf);
 		pcf->regulator_pdev[i] = pdev;
 
 		platform_device_add(pdev);
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index e9f4323dd2c..875f7a87573 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -108,6 +108,10 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
+static const struct tmio_mmc_data t7166xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static const struct resource t7l66xb_mmc_resources[] = {
 	{
 		.start = 0x800,
@@ -149,6 +153,7 @@ static struct mfd_cell t7l66xb_cells[] = {
 		.name = "tmio-mmc",
 		.enable = t7l66xb_mmc_enable,
 		.disable = t7l66xb_mmc_disable,
+		.driver_data = &t7166xb_mmc_data,
 		.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
 		.resources = t7l66xb_mmc_resources,
 	},
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 43222c12fec..c3993ac2054 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -75,6 +75,10 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
+const static struct tmio_mmc_data tc6387xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static struct resource tc6387xb_mmc_resources[] = {
 	{
 		.start = 0x800,
@@ -98,6 +102,7 @@ static struct mfd_cell tc6387xb_cells[] = {
 		.name = "tmio-mmc",
 		.enable = tc6387xb_mmc_enable,
 		.disable = tc6387xb_mmc_disable,
+		.driver_data = &tc6387xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
 		.resources = tc6387xb_mmc_resources,
 	},
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 77a12fc8045..9d2abb5d6e2 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,6 +136,10 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 	return 0;
 }
 
+const static struct tmio_mmc_data tc6393xb_mmc_data = {
+	.hclk = 24000000,
+};
+
 static struct resource __devinitdata tc6393xb_nand_resources[] = {
 	{
 		.start	= 0x1000,
@@ -351,6 +355,7 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 	},
 	[TC6393XB_CELL_MMC] = {
 		.name = "tmio-mmc",
+		.driver_data = &tc6393xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
 		.resources = tc6393xb_mmc_resources,
 	},
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index cf30d06a010..7c21bf79156 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -265,7 +265,7 @@ static int wm8400_init(struct wm8400 *wm8400,
 
 	mutex_init(&wm8400->io_lock);
 
-	wm8400->dev->driver_data = wm8400;
+	dev_set_drvdata(wm8400->dev, wm8400);
 
 	/* Check that this is actually a WM8400 */
 	ret = wm8400->read_dev(wm8400->io_data, WM8400_RESET_ID, 1, &reg);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6d1ac180f6e..68ab39d7cb3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -235,5 +235,6 @@ config ISL29003
 
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7871f05dcb9..36f733cd60e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-y				+= eeprom/
+obj-y				+= cb710/
diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c
index 0207dd59090..b5346b4db91 100644
--- a/drivers/misc/c2port/core.c
+++ b/drivers/misc/c2port/core.c
@@ -15,6 +15,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
+#include <linux/kmemcheck.h>
 #include <linux/ctype.h>
 #include <linux/delay.h>
 #include <linux/idr.h>
@@ -891,6 +892,7 @@ struct c2port_device *c2port_device_register(char *name,
 		return ERR_PTR(-EINVAL);
 
 	c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL);
+	kmemcheck_annotate_bitfield(c2dev, flags);
 	if (unlikely(!c2dev))
 		return ERR_PTR(-ENOMEM);
 
diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig
new file mode 100644
index 00000000000..22429b8b106
--- /dev/null
+++ b/drivers/misc/cb710/Kconfig
@@ -0,0 +1,25 @@
+config CB710_CORE
+	tristate "ENE CB710/720 Flash memory card reader support"
+	depends on PCI
+	help
+	  This option enables support for PCI ENE CB710/720 Flash memory card
+	  reader found in some laptops (ie. some versions of HP Compaq nx9500).
+
+	  You will also have to select some flash card format drivers (MMC/SD,
+	  MemoryStick).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710.
+
+config CB710_DEBUG
+	bool "Enable driver debugging"
+	depends on CB710_CORE != n
+	default n
+	help
+	  This is an option for use by developers; most people should
+	  say N here.  This adds a lot of debugging output to dmesg.
+
+config CB710_DEBUG_ASSUMPTIONS
+	bool
+	depends on CB710_CORE != n
+	default y
diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile
new file mode 100644
index 00000000000..7b80cbf1a60
--- /dev/null
+++ b/drivers/misc/cb710/Makefile
@@ -0,0 +1,8 @@
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif
+
+obj-$(CONFIG_CB710_CORE)	+= cb710.o
+
+cb710-y				:= core.o sgbuf2.o
+cb710-$(CONFIG_CB710_DEBUG)	+= debug.o
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
new file mode 100644
index 00000000000..b14eab0f2ba
--- /dev/null
+++ b/drivers/misc/cb710/core.c
@@ -0,0 +1,357 @@
+/*
+ *  cb710/core.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/cb710.h>
+
+static DEFINE_IDA(cb710_ida);
+static DEFINE_SPINLOCK(cb710_ida_lock);
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t mask, uint32_t xor)
+{
+	u32 rval;
+
+	pci_read_config_dword(pdev, reg, &rval);
+	rval = (rval & mask) ^ xor;
+	pci_write_config_dword(pdev, reg, rval);
+}
+EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
+
+/* Some magic writes based on Windows driver init code */
+static int __devinit cb710_pci_configure(struct pci_dev *pdev)
+{
+	unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+	struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
+	u32 val;
+
+	cb710_pci_update_config_reg(pdev, 0x48,
+		~0x000000FF, 0x0000003F);
+
+	pci_read_config_dword(pdev, 0x48, &val);
+	if (val & 0x80000000)
+		return 0;
+
+	if (!pdev0)
+		return -ENODEV;
+
+	if (pdev0->vendor == PCI_VENDOR_ID_ENE
+	    && pdev0->device == PCI_DEVICE_ID_ENE_720) {
+		cb710_pci_update_config_reg(pdev0, 0x8C,
+			~0x00F00000, 0x00100000);
+		cb710_pci_update_config_reg(pdev0, 0xB0,
+			~0x08000000, 0x08000000);
+	}
+
+	cb710_pci_update_config_reg(pdev0, 0x8C,
+		~0x00000F00, 0x00000200);
+	cb710_pci_update_config_reg(pdev0, 0x90,
+		~0x00060000, 0x00040000);
+
+	pci_dev_put(pdev0);
+
+	return 0;
+}
+
+static irqreturn_t cb710_irq_handler(int irq, void *data)
+{
+	struct cb710_chip *chip = data;
+	struct cb710_slot *slot = &chip->slot[0];
+	irqreturn_t handled = IRQ_NONE;
+	unsigned nr;
+
+	spin_lock(&chip->irq_lock); /* incl. smp_rmb() */
+
+	for (nr = chip->slots; nr; ++slot, --nr) {
+		cb710_irq_handler_t handler_func = slot->irq_handler;
+		if (handler_func && handler_func(slot))
+			handled = IRQ_HANDLED;
+	}
+
+	spin_unlock(&chip->irq_lock);
+
+	return handled;
+}
+
+static void cb710_release_slot(struct device *dev)
+{
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev));
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+
+	/* slot struct can be freed now */
+	atomic_dec(&chip->slot_refs_count);
+#endif
+}
+
+static int __devinit cb710_register_slot(struct cb710_chip *chip,
+	unsigned slot_mask, unsigned io_offset, const char *name)
+{
+	int nr = chip->slots;
+	struct cb710_slot *slot = &chip->slot[nr];
+	int err;
+
+	dev_dbg(cb710_chip_dev(chip),
+		"register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n",
+		name, chip->platform_id, nr, slot_mask, io_offset);
+
+	/* slot->irq_handler == NULL here; this needs to be
+	 * seen before platform_device_register() */
+	++chip->slots;
+	smp_wmb();
+
+	slot->iobase = chip->iobase + io_offset;
+	slot->pdev.name = name;
+	slot->pdev.id = chip->platform_id;
+	slot->pdev.dev.parent = &chip->pdev->dev;
+	slot->pdev.dev.release = cb710_release_slot;
+
+	err = platform_device_register(&slot->pdev);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_inc(&chip->slot_refs_count);
+#endif
+
+	if (err) {
+		/* device_initialize() called from platform_device_register()
+		 * wants this on error path */
+		platform_device_put(&slot->pdev);
+
+		/* slot->irq_handler == NULL here anyway, so no lock needed */
+		--chip->slots;
+		return err;
+	}
+
+	chip->slot_mask |= slot_mask;
+
+	return 0;
+}
+
+static void cb710_unregister_slot(struct cb710_chip *chip,
+	unsigned slot_mask)
+{
+	int nr = chip->slots - 1;
+
+	if (!(chip->slot_mask & slot_mask))
+		return;
+
+	platform_device_unregister(&chip->slot[nr].pdev);
+
+	/* complementary to spin_unlock() in cb710_set_irq_handler() */
+	smp_rmb();
+	BUG_ON(chip->slot[nr].irq_handler != NULL);
+
+	/* slot->irq_handler == NULL here, so no lock needed */
+	--chip->slots;
+	chip->slot_mask &= ~slot_mask;
+}
+
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler)
+{
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chip->irq_lock, flags);
+	slot->irq_handler = handler;
+	spin_unlock_irqrestore(&chip->irq_lock, flags);
+}
+EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
+
+#ifdef CONFIG_PM
+
+static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+
+	free_irq(pdev->irq, chip);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	if (state.event & PM_EVENT_SLEEP)
+		pci_set_power_state(pdev, PCI_D3cold);
+	return 0;
+}
+
+static int cb710_resume(struct pci_dev *pdev)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+	int err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	return devm_request_irq(&pdev->dev, pdev->irq,
+		cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_probe(struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	struct cb710_chip *chip;
+	unsigned long flags;
+	u32 val;
+	int err;
+	int n = 0;
+
+	err = cb710_pci_configure(pdev);
+	if (err)
+		return err;
+
+	/* this is actually magic... */
+	pci_read_config_dword(pdev, 0x48, &val);
+	if (!(val & 0x80000000)) {
+		pci_write_config_dword(pdev, 0x48, val|0x71000000);
+		pci_read_config_dword(pdev, 0x48, &val);
+	}
+
+	dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val);
+	if (!(val & 0x70000000))
+		return -ENODEV;
+	val = (val >> 28) & 7;
+	if (val & CB710_SLOT_MMC)
+		++n;
+	if (val & CB710_SLOT_MS)
+		++n;
+	if (val & CB710_SLOT_SM)
+		++n;
+
+	chip = devm_kzalloc(&pdev->dev,
+		sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME);
+	if (err)
+		return err;
+
+	chip->pdev = pdev;
+	chip->iobase = pcim_iomap_table(pdev)[0];
+
+	pci_set_drvdata(pdev, chip);
+
+	err = devm_request_irq(&pdev->dev, pdev->irq,
+		cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (err)
+		return err;
+
+	do {
+		if (!ida_pre_get(&cb710_ida, GFP_KERNEL))
+			return -ENOMEM;
+
+		spin_lock_irqsave(&cb710_ida_lock, flags);
+		err = ida_get_new(&cb710_ida, &chip->platform_id);
+		spin_unlock_irqrestore(&cb710_ida_lock, flags);
+
+		if (err && err != -EAGAIN)
+			return err;
+	} while (err);
+
+
+	dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n",
+		chip->platform_id, chip->iobase, pdev->irq);
+
+	if (val & CB710_SLOT_MMC) {	/* MMC/SD slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_MMC, 0x00, "cb710-mmc");
+		if (err)
+			return err;
+	}
+
+	if (val & CB710_SLOT_MS) {	/* MemoryStick slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_MS, 0x40, "cb710-ms");
+		if (err)
+			goto unreg_mmc;
+	}
+
+	if (val & CB710_SLOT_SM) {	/* SmartMedia slot */
+		err = cb710_register_slot(chip,
+			CB710_SLOT_SM, 0x60, "cb710-sm");
+		if (err)
+			goto unreg_ms;
+	}
+
+	return 0;
+unreg_ms:
+	cb710_unregister_slot(chip, CB710_SLOT_MS);
+unreg_mmc:
+	cb710_unregister_slot(chip, CB710_SLOT_MMC);
+
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+	return err;
+}
+
+static void __devexit cb710_remove_one(struct pci_dev *pdev)
+{
+	struct cb710_chip *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	cb710_unregister_slot(chip, CB710_SLOT_SM);
+	cb710_unregister_slot(chip, CB710_SLOT_MS);
+	cb710_unregister_slot(chip, CB710_SLOT_MMC);
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	BUG_ON(atomic_read(&chip->slot_refs_count) != 0);
+#endif
+
+	spin_lock_irqsave(&cb710_ida_lock, flags);
+	ida_remove(&cb710_ida, chip->platform_id);
+	spin_unlock_irqrestore(&cb710_ida_lock, flags);
+}
+
+static const struct pci_device_id cb710_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }
+};
+
+static struct pci_driver cb710_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = cb710_pci_tbl,
+	.probe = cb710_probe,
+	.remove = __devexit_p(cb710_remove_one),
+#ifdef CONFIG_PM
+	.suspend = cb710_suspend,
+	.resume = cb710_resume,
+#endif
+};
+
+static int __init cb710_init_module(void)
+{
+	return pci_register_driver(&cb710_driver);
+}
+
+static void __exit cb710_cleanup_module(void)
+{
+	pci_unregister_driver(&cb710_driver);
+	ida_destroy(&cb710_ida);
+}
+
+module_init(cb710_init_module);
+module_exit(cb710_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cb710_pci_tbl);
diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c
new file mode 100644
index 00000000000..02358d086e0
--- /dev/null
+++ b/drivers/misc/cb710/debug.c
@@ -0,0 +1,119 @@
+/*
+ *  cb710/debug.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cb710.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define CB710_REG_COUNT		0x80
+
+static const u16 allow[CB710_REG_COUNT/16] = {
+	0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+	0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF,
+};
+static const char *const prefix[ARRAY_SIZE(allow)] = {
+	"MMC", "MMC", "MMC", "MMC",
+	"MS?", "MS?", "SM?", "SM?"
+};
+
+static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits)
+{
+	unsigned mask = (1 << bits/8) - 1;
+	offset *= bits/8;
+	return ((allow[block] >> offset) & mask) == mask;
+}
+
+#define CB710_READ_REGS_TEMPLATE(t)					\
+static void cb710_read_regs_##t(void __iomem *iobase,			\
+	u##t *reg, unsigned select)					\
+{									\
+	unsigned i, j;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) {	\
+		if (!(select & (1 << i)))					\
+			continue;					\
+									\
+		for (j = 0; j < 0x10/(t/8); ++j) {			\
+			if (!allow_reg_read(i, j, t))			\
+				continue;				\
+			reg[j] = ioread##t(iobase			\
+				+ (i << 4) + (j * (t/8)));		\
+		}							\
+	}								\
+}
+
+static const char cb710_regf_8[] = "%02X";
+static const char cb710_regf_16[] = "%04X";
+static const char cb710_regf_32[] = "%08X";
+static const char cb710_xes[] = "xxxxxxxx";
+
+#define CB710_DUMP_REGS_TEMPLATE(t)					\
+static void cb710_dump_regs_##t(struct device *dev,			\
+	const u##t *reg, unsigned select)				\
+{									\
+	const char *const xp = &cb710_xes[8 - t/4];			\
+	const char *const format = cb710_regf_##t;			\
+									\
+	char msg[100], *p;						\
+	unsigned i, j;							\
+									\
+	for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) {	\
+		if (!(select & (1 << i)))				\
+			continue;					\
+		p = msg;						\
+		for (j = 0; j < 0x10/(t/8); ++j) {			\
+			*p++ = ' ';					\
+			if (j == 8/(t/8))				\
+				*p++ = ' ';				\
+			if (allow_reg_read(i, j, t))			\
+				p += sprintf(p, format, reg[j]);	\
+			else						\
+				p += sprintf(p, "%s", xp);		\
+		}							\
+		dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg);	\
+	}								\
+}
+
+#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t)				\
+static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip,	\
+	unsigned select)						\
+{									\
+	u##t regs[CB710_REG_COUNT/sizeof(u##t)];			\
+									\
+	memset(&regs, 0, sizeof(regs));					\
+	cb710_read_regs_##t(chip->iobase, regs, select);		\
+	cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select);	\
+}
+
+#define CB710_REG_ACCESS_TEMPLATES(t)		\
+  CB710_READ_REGS_TEMPLATE(t)			\
+  CB710_DUMP_REGS_TEMPLATE(t)			\
+  CB710_READ_AND_DUMP_REGS_TEMPLATE(t)
+
+CB710_REG_ACCESS_TEMPLATES(8)
+CB710_REG_ACCESS_TEMPLATES(16)
+CB710_REG_ACCESS_TEMPLATES(32)
+
+void cb710_dump_regs(struct cb710_chip *chip, unsigned select)
+{
+	if (!(select & CB710_DUMP_REGS_MASK))
+		select = CB710_DUMP_REGS_ALL;
+	if (!(select & CB710_DUMP_ACCESS_MASK))
+		select |= CB710_DUMP_ACCESS_8;
+
+	if (select & CB710_DUMP_ACCESS_32)
+		cb710_read_and_dump_regs_32(chip, select);
+	if (select & CB710_DUMP_ACCESS_16)
+		cb710_read_and_dump_regs_16(chip, select);
+	if (select & CB710_DUMP_ACCESS_8)
+		cb710_read_and_dump_regs_8(chip, select);
+}
+EXPORT_SYMBOL_GPL(cb710_dump_regs);
+
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
new file mode 100644
index 00000000000..d38a7acdb6e
--- /dev/null
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -0,0 +1,150 @@
+/*
+ *  cb710/sgbuf2.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cb710.h>
+
+static bool sg_dwiter_next(struct sg_mapping_iter *miter)
+{
+	if (sg_miter_next(miter)) {
+		miter->consumed = 0;
+		return true;
+	} else
+		return false;
+}
+
+static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter)
+{
+	return miter->length == miter->consumed && !sg_dwiter_next(miter);
+}
+
+static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
+{
+	size_t len, left = 4;
+	uint32_t data;
+	void *addr = &data;
+
+	do {
+		len = min(miter->length - miter->consumed, left);
+		memcpy(addr, miter->addr + miter->consumed, len);
+		miter->consumed += len;
+		left -= len;
+		if (!left)
+			return data;
+		addr += len;
+	} while (sg_dwiter_next(miter));
+
+	memset(addr, 0, left);
+	return data;
+}
+
+static inline bool needs_unaligned_copy(const void *ptr)
+{
+#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+	return false;
+#else
+	return ((ptr - NULL) & 3) != 0;
+#endif
+}
+
+static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr)
+{
+	size_t len;
+
+	if (sg_dwiter_is_at_end(miter))
+		return true;
+
+	len = miter->length - miter->consumed;
+
+	if (likely(len >= 4 && !needs_unaligned_copy(
+			miter->addr + miter->consumed))) {
+		*ptr = miter->addr + miter->consumed;
+		miter->consumed += 4;
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer
+ * @miter: sg mapping iterator used for reading
+ *
+ * Description:
+ *   Returns 32-bit word starting at byte pointed to by @miter@
+ *   handling any alignment issues.  Bytes past the buffer's end
+ *   are not accessed (read) but are returned as zeroes.  @miter@
+ *   is advanced by 4 bytes or to the end of buffer whichever is
+ *   closer.
+ *
+ * Context:
+ *   Same requirements as in sg_miter_next().
+ *
+ * Returns:
+ *   32-bit word just read.
+ */
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter)
+{
+	uint32_t *ptr = NULL;
+
+	if (likely(sg_dwiter_get_next_block(miter, &ptr)))
+		return ptr ? *ptr : 0;
+
+	return sg_dwiter_read_buffer(miter);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block);
+
+static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
+{
+	size_t len, left = 4;
+	void *addr = &data;
+
+	do {
+		len = min(miter->length - miter->consumed, left);
+		memcpy(miter->addr, addr, len);
+		miter->consumed += len;
+		left -= len;
+		if (!left)
+			return;
+		addr += len;
+		flush_kernel_dcache_page(miter->page);
+	} while (sg_dwiter_next(miter));
+}
+
+/**
+ * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
+ * @miter: sg mapping iterator used for writing
+ *
+ * Description:
+ *   Writes 32-bit word starting at byte pointed to by @miter@
+ *   handling any alignment issues.  Bytes which would be written
+ *   past the buffer's end are silently discarded. @miter@ is
+ *   advanced by 4 bytes or to the end of buffer whichever is closer.
+ *
+ * Context:
+ *   Same requirements as in sg_miter_next().
+ */
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data)
+{
+	uint32_t *ptr = NULL;
+
+	if (likely(sg_dwiter_get_next_block(miter, &ptr))) {
+		if (ptr)
+			*ptr = data;
+		else
+			return;
+	} else
+		sg_dwiter_write_slow(miter, data);
+
+	if (miter->length == miter->consumed)
+		flush_kernel_dcache_page(miter->page);
+}
+EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
+
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 89fec052f3b..9118613af32 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -48,6 +48,20 @@ config EEPROM_LEGACY
 	  This driver can also be built as a module.  If so, the module
 	  will be called eeprom.
 
+config EEPROM_MAX6875
+	tristate "Maxim MAX6874/5 power supply supervisor"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get read-only support for the user EEPROM of
+	  the Maxim MAX6874/5 EEPROM-programmable, quad power-supply
+	  sequencer/supervisor.
+
+	  All other features of this chip should be accessed via i2c-dev.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max6875.
+
+
 config EEPROM_93CX6
 	tristate "EEPROM 93CX6 support"
 	help
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index 539dd8f8812..df3d68ffa9d 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_EEPROM_AT24)	+= at24.o
 obj-$(CONFIG_EEPROM_AT25)	+= at25.o
 obj-$(CONFIG_EEPROM_LEGACY)	+= eeprom.o
+obj-$(CONFIG_EEPROM_MAX6875)	+= max6875.o
 obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
diff --git a/drivers/i2c/chips/max6875.c b/drivers/misc/eeprom/max6875.c
index 033d9d81ec8..3c0c58eed34 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -3,7 +3,7 @@
 
     Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
 
-    Based on i2c/chips/eeprom.c
+    Based on eeprom.c
 
     The MAX6875 has a bank of registers and two banks of EEPROM.
     Address ranges are defined as follows:
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index bbefe77c67a..3ce2920e2bf 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -302,7 +302,7 @@ static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr)
 		pnode = uv_node_to_pnode(nid);
 		if (bid < 0 || gru_base[bid])
 			continue;
-		page = alloc_pages_node(nid, GFP_KERNEL, order);
+		page = alloc_pages_exact_node(nid, GFP_KERNEL, order);
 		if (!page)
 			goto fail;
 		gru_base[bid] = page_address(page);
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 9172fcdee4e..c76677afda1 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -232,7 +232,7 @@ xpc_create_gru_mq_uv(unsigned int mq_size, int cpu, char *irq_name,
 	mq->mmr_blade = uv_cpu_to_blade_id(cpu);
 
 	nid = cpu_to_node(cpu);
-	page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+	page = alloc_pages_exact_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
 				pg_order);
 	if (page == NULL) {
 		dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d "
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 6faefcffcb5..8d1c60a3f0d 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -450,7 +450,8 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			 "packet\n", sizeof(struct xpnet_pending_msg));
 
 		dev->stats.tx_errors++;
-		return -ENOMEM;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
 	}
 
 	/* get the beginning of the first cacheline and end of last */
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 98ffc41eaf2..adc205c49fb 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -147,7 +147,8 @@ struct mmc_blk_request {
 static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 {
 	int err;
-	__be32 blocks;
+	u32 result;
+	__be32 *blocks;
 
 	struct mmc_request mrq;
 	struct mmc_command cmd;
@@ -199,14 +200,21 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	mrq.cmd = &cmd;
 	mrq.data = &data;
 
-	sg_init_one(&sg, &blocks, 4);
+	blocks = kmalloc(4, GFP_KERNEL);
+	if (!blocks)
+		return (u32)-1;
+
+	sg_init_one(&sg, blocks, 4);
 
 	mmc_wait_for_req(card->host, &mrq);
 
+	result = ntohl(*blocks);
+	kfree(blocks);
+
 	if (cmd.error || data.error)
-		return (u32)-1;
+		result = (u32)-1;
 
-	return ntohl(blocks);
+	return result;
 }
 
 static u32 get_card_status(struct mmc_card *card, struct request *req)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 26491173275..d84c880fac8 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -708,7 +708,13 @@ static void mmc_power_up(struct mmc_host *host)
 	 */
 	mmc_delay(10);
 
-	host->ios.clock = host->f_min;
+	if (host->f_min > 400000) {
+		pr_warning("%s: Minimum clock frequency too high for "
+				"identification mode\n", mmc_hostname(host));
+		host->ios.clock = host->f_min;
+	} else
+		host->ios.clock = 400000;
+
 	host->ios.power_mode = MMC_POWER_ON;
 	mmc_set_ios(host);
 
@@ -855,61 +861,72 @@ void mmc_rescan(struct work_struct *work)
 
 	mmc_bus_get(host);
 
-	if (host->bus_ops == NULL) {
-		/*
-		 * Only we can add a new handler, so it's safe to
-		 * release the lock here.
-		 */
+	/* if there is a card registered, check whether it is still present */
+	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
+		host->bus_ops->detect(host);
+
+	mmc_bus_put(host);
+
+
+	mmc_bus_get(host);
+
+	/* if there still is a card present, stop here */
+	if (host->bus_ops != NULL) {
 		mmc_bus_put(host);
+		goto out;
+	}
 
-		if (host->ops->get_cd && host->ops->get_cd(host) == 0)
-			goto out;
+	/* detect a newly inserted card */
 
-		mmc_claim_host(host);
+	/*
+	 * Only we can add a new handler, so it's safe to
+	 * release the lock here.
+	 */
+	mmc_bus_put(host);
 
-		mmc_power_up(host);
-		mmc_go_idle(host);
+	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
+		goto out;
 
-		mmc_send_if_cond(host, host->ocr_avail);
+	mmc_claim_host(host);
 
-		/*
-		 * First we search for SDIO...
-		 */
-		err = mmc_send_io_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_sdio(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	mmc_power_up(host);
+	mmc_go_idle(host);
 
-		/*
-		 * ...then normal SD...
-		 */
-		err = mmc_send_app_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_sd(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	mmc_send_if_cond(host, host->ocr_avail);
 
-		/*
-		 * ...and finally MMC.
-		 */
-		err = mmc_send_op_cond(host, 0, &ocr);
-		if (!err) {
-			if (mmc_attach_mmc(host, ocr))
-				mmc_power_off(host);
-			goto out;
-		}
+	/*
+	 * First we search for SDIO...
+	 */
+	err = mmc_send_io_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_sdio(host, ocr))
+			mmc_power_off(host);
+		goto out;
+	}
 
-		mmc_release_host(host);
-		mmc_power_off(host);
-	} else {
-		if (host->bus_ops->detect && !host->bus_dead)
-			host->bus_ops->detect(host);
+	/*
+	 * ...then normal SD...
+	 */
+	err = mmc_send_app_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_sd(host, ocr))
+			mmc_power_off(host);
+		goto out;
+	}
 
-		mmc_bus_put(host);
+	/*
+	 * ...and finally MMC.
+	 */
+	err = mmc_send_op_cond(host, 0, &ocr);
+	if (!err) {
+		if (mmc_attach_mmc(host, ocr))
+			mmc_power_off(host);
+		goto out;
 	}
+
+	mmc_release_host(host);
+	mmc_power_off(host);
+
 out:
 	if (host->caps & MMC_CAP_NEEDS_POLL)
 		mmc_schedule_delayed_work(&host->detect, HZ);
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691f3f6..40111a6d8d5 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -83,6 +83,17 @@ config MMC_SDHCI_OF
 
 	  If unsure, say N.
 
+config MMC_SDHCI_PLTFM
+	tristate "SDHCI support on the platform specific bus"
+	depends on MMC_SDHCI
+	help
+	  This selects the platform specific bus support for Secure Digital Host
+	  Controller Interface.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -155,7 +166,7 @@ config MMC_ATMELMCI_DMA
 
 config MMC_IMX
 	tristate "Motorola i.MX Multimedia Card Interface support"
-	depends on ARCH_IMX
+	depends on ARCH_MX1
 	help
 	  This selects the Motorola i.MX Multimedia card Interface.
 	  If you have a i.MX platform with a Multimedia Card slot,
@@ -237,7 +248,20 @@ config MMC_SDRICOH_CS
 
 config MMC_TMIO
 	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
-	depends on MFD_TMIO
+	depends on MFD_TMIO || MFD_ASIC3
 	help
 	  This provides support for the SD/MMC cell found in TC6393XB,
-	  T7L66XB and also ipaq ASIC3
+	  T7L66XB and also HTC ASIC3
+
+config MMC_CB710
+	tristate "ENE CB710 MMC/SD Interface support"
+	depends on PCI
+	select CB710_CORE
+	help
+	  This option enables support for MMC/SD part of ENE CB710/720 Flash
+	  memory card reader found in some laptops (ie. some versions of
+	  HP Compaq nx9500).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cb710-mmc.
+
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 970a997620e..79da397c5fe 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)	+= ricoh_mmc.o
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
+obj-$(CONFIG_MMC_SDHCI_PLTFM)	+= sdhci-pltfm.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
@@ -29,4 +30,8 @@ endif
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
 
+ifeq ($(CONFIG_CB710_DEBUG),y)
+	CFLAGS-cb710-mmc	+= -DDEBUG
+endif
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index b58364ed6bb..fc8a0fe7c5c 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -7,6 +7,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+/*
+ * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
+ * Registers and bitfields marked with [2] are only available in MCI2
+ */
+
 #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
 #define __DRIVERS_MMC_ATMEL_MCI_H__
 
@@ -14,11 +20,17 @@
 #define MCI_CR			0x0000	/* Control */
 # define MCI_CR_MCIEN		(  1 <<  0)	/* MCI Enable */
 # define MCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
+# define MCI_CR_PWSEN		(  1 <<  2)	/* Power Save Enable */
+# define MCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
 # define MCI_CR_SWRST		(  1 <<  7)	/* Software Reset */
 #define MCI_MR			0x0004	/* Mode */
 # define MCI_MR_CLKDIV(x)	((x) <<  0)	/* Clock Divider */
+# define MCI_MR_PWSDIV(x)	((x) <<  8)	/* Power Saving Divider */
 # define MCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
 # define MCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
+# define MCI_MR_PDCFBYTE	(  1 << 13)	/* Force Byte Transfer */
+# define MCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
+# define MCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
 #define MCI_DTOR		0x0008	/* Data Timeout */
 # define MCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
 # define MCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
@@ -28,6 +40,7 @@
 # define MCI_SDCSEL_MASK	(  3 <<  0)
 # define MCI_SDCBUS_1BIT	(  0 <<  6)	/* 1-bit data bus */
 # define MCI_SDCBUS_4BIT	(  2 <<  6)	/* 4-bit data bus */
+# define MCI_SDCBUS_8BIT	(  3 <<  6)	/* 8-bit data bus[2] */
 # define MCI_SDCBUS_MASK	(  3 <<  6)
 #define MCI_ARGR		0x0010	/* Command Argument */
 #define MCI_CMDR		0x0014	/* Command */
@@ -56,6 +69,9 @@
 #define MCI_BLKR		0x0018	/* Block */
 # define MCI_BCNT(x)		((x) <<  0)	/* Data Block Count */
 # define MCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
+#define MCI_CSTOR		0x001c	/* Completion Signal Timeout[2] */
+# define MCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
+# define MCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
 #define MCI_RSPR		0x0020	/* Response 0 */
 #define MCI_RSPR1		0x0024	/* Response 1 */
 #define MCI_RSPR2		0x0028	/* Response 2 */
@@ -83,7 +99,24 @@
 # define MCI_DTOE		(  1 <<  22)	/* Data Time-Out Error */
 # define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
 # define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
+#define MCI_DMA			0x0050	/* DMA Configuration[2] */
+# define MCI_DMA_OFFSET(x)	((x) <<  0)	/* DMA Write Buffer Offset */
+# define MCI_DMA_CHKSIZE(x)	((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
+# define MCI_DMAEN		(  1 <<  8)	/* DMA Hardware Handshaking Enable */
+#define MCI_CFG			0x0054	/* Configuration[2] */
+# define MCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
+# define MCI_CFG_FERRCTRL_COR	(  1 <<  4)	/* Flow Error flag reset control mode */
+# define MCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
+# define MCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
+#define MCI_WPMR		0x00e4	/* Write Protection Mode[2] */
+# define MCI_WP_EN		(  1 <<  0)	/* WP Enable */
+# define MCI_WP_KEY		(0x4d4349 << 8)	/* WP Key */
+#define MCI_WPSR		0x00e8	/* Write Protection Status[2] */
+# define MCI_GET_WP_VS(x)	((x) & 0x0f)
+# define MCI_GET_WP_VSRC(x)	(((x) >> 8) & 0xffff)
+#define MCI_FIFO_APERTURE	0x0200	/* FIFO Aperture[2] */
 
+/* This is not including the FIFO Aperture on MCI2 */
 #define MCI_REGS_SIZE		0x100
 
 /* Register access macros */
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
new file mode 100644
index 00000000000..11efefb1af5
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -0,0 +1,804 @@
+/*
+ *  cb710/mmc.c
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "cb710-mmc.h"
+
+static const u8 cb710_clock_divider_log2[8] = {
+/*	1, 2, 4, 8, 16, 32, 128, 512 */
+	0, 1, 2, 3,  4,  5,   7,   9
+};
+#define CB710_MAX_DIVIDER_IDX	\
+	(ARRAY_SIZE(cb710_clock_divider_log2) - 1)
+
+static const u8 cb710_src_freq_mhz[16] = {
+	33, 10, 20, 25, 30, 35, 40, 45,
+	50, 55, 60, 65, 70, 75, 80, 85
+};
+
+static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev;
+	u32 src_freq_idx;
+	u32 divider_idx;
+	int src_hz;
+
+	/* this is magic, unverifiable for me, unless I get
+	 * MMC card with cables connected to bus signals */
+	pci_read_config_dword(pdev, 0x48, &src_freq_idx);
+	src_freq_idx = (src_freq_idx >> 16) & 0xF;
+	src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000;
+
+	for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) {
+		if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx])
+			break;
+	}
+
+	if (src_freq_idx)
+		divider_idx |= 0x8;
+
+	cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28);
+
+	dev_dbg(cb710_slot_dev(slot),
+		"clock set to %d Hz, wanted %d Hz; flag = %d\n",
+		src_hz >> cb710_clock_divider_log2[divider_idx & 7],
+		hz, (divider_idx & 8) != 0);
+}
+
+static void __cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	/* clear global IE
+	 * - it gets set later if any interrupt sources are enabled */
+	mask |= CB710_MMC_IE_IRQ_ENABLE;
+
+	/* look like interrupt is fired whenever
+	 * WORD[0x0C] & WORD[0x10] != 0;
+	 * -> bit 15 port 0x0C seems to be global interrupt enable
+	 */
+
+	enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT)
+		& ~mask) | enable;
+
+	if (enable)
+		enable |= CB710_MMC_IE_IRQ_ENABLE;
+
+	cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable);
+}
+
+static void cb710_mmc_enable_irq(struct cb710_slot *slot,
+	unsigned short enable, unsigned short mask)
+{
+	struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot));
+	unsigned long flags;
+
+	spin_lock_irqsave(&reader->irq_lock, flags);
+	/* this is the only thing irq_lock protects */
+	__cb710_mmc_enable_irq(slot, enable, mask);
+	spin_unlock_irqrestore(&reader->irq_lock, flags);
+}
+
+static void cb710_mmc_reset_events(struct cb710_slot *slot)
+{
+	cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF);
+	cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF);
+}
+
+static int cb710_mmc_is_card_inserted(struct cb710_slot *slot)
+{
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_CARD_DETECTED;
+}
+
+static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable)
+{
+	dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n",
+		enable ? 4 : 1, enable ? "s" : "");
+	if (enable)
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			CB710_MMC_C1_4BIT_DATA_BUS, 0);
+	else
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT,
+			0, CB710_MMC_C1_4BIT_DATA_BUS);
+}
+
+static int cb710_check_event(struct cb710_slot *slot, u8 what)
+{
+	u16 status;
+
+	status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT);
+
+	if (status & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		/* it is just a guess, so log it */
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : ignoring bit 6 in status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		status &= ~CB710_MMC_S0_FIFO_UNDERFLOW;
+	}
+
+	if (status & CB710_MMC_STATUS_ERROR_EVENTS) {
+		dev_dbg(cb710_slot_dev(slot),
+			"CHECK : returning EIO on status %04X\n", status);
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF);
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_RESET);
+		return -EIO;
+	}
+
+	/* 'what' is a bit in MMC_STATUS1 */
+	if ((status >> 8) & what) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int cb710_wait_for_event(struct cb710_slot *slot, u8 what)
+{
+	int err = 0;
+	unsigned limit = 2000000;	/* FIXME: real timeout */
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (!(err = cb710_check_event(slot, what))) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 2000000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n",
+			limit, what, e, x);
+#endif
+	return err < 0 ? err : 0;
+}
+
+
+static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask)
+{
+	unsigned limit = 500000;	/* FIXME: real timeout */
+	int err = 0;
+
+#ifdef CONFIG_CB710_DEBUG
+	u32 e, x;
+	e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+#endif
+
+	while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) {
+		if (!--limit) {
+			cb710_dump_regs(cb710_slot_to_chip(slot),
+				CB710_DUMP_REGS_MMC);
+			err = -ETIMEDOUT;
+			break;
+		}
+		udelay(1);
+	}
+
+#ifdef CONFIG_CB710_DEBUG
+	x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+
+	limit = 500000 - limit;
+	if (limit > 100)
+		dev_dbg(cb710_slot_dev(slot),
+			"WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n",
+			limit, mask, e, x);
+#endif
+	return 0;
+}
+
+static void cb710_mmc_set_transfer_size(struct cb710_slot *slot,
+	size_t count, size_t blocksize)
+{
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT,
+		((count - 1) << 16)|(blocksize - 1));
+
+	dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n",
+		count, count == 1 ? "" : "s", blocksize);
+}
+
+static void cb710_mmc_fifo_hack(struct cb710_slot *slot)
+{
+	/* without this, received data is prepended with 8-bytes of zeroes */
+	u32 r1, r2;
+	int ok = 0;
+
+	r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT);
+	if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT)
+	    & CB710_MMC_S0_FIFO_UNDERFLOW) {
+		cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT,
+			CB710_MMC_S0_FIFO_UNDERFLOW);
+		ok = 1;
+	}
+
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: expected STATUS0 bit was %s\n",
+		ok ? "set." : "NOT SET!");
+	dev_dbg(cb710_slot_dev(slot),
+		"FIFO-read-hack: dwords ignored: %08X %08X - %s\n",
+		r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok");
+}
+
+static int cb710_mmc_receive_pio(struct cb710_slot *slot,
+	struct sg_mapping_iter *miter, size_t dw_count)
+{
+	if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) {
+		int err = cb710_wait_for_event(slot,
+			CB710_MMC_S1_PIO_TRANSFER_DONE);
+		if (err)
+			return err;
+	}
+
+	cb710_sg_dwiter_write_from_io(miter,
+		slot->iobase + CB710_MMC_DATA_PORT, dw_count);
+
+	return 0;
+}
+
+static bool cb710_is_transfer_size_supported(struct mmc_data *data)
+{
+	return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8));
+}
+
+static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles non-16B-boundary blocks
+	 * except single 8B block */
+	if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	cb710_mmc_fifo_hack(slot);
+
+	while (blocks-- > 0) {
+		len = data->blksz;
+
+		while (len >= 16) {
+			err = cb710_mmc_receive_pio(slot, &miter, 4);
+			if (err)
+				goto out;
+			len -= 16;
+		}
+
+		if (!len)
+			continue;
+
+		cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+			len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+		len = (len >= 8) ? 4 : 2;
+		err = cb710_mmc_receive_pio(slot, &miter, len);
+		if (err)
+			goto out;
+	}
+out:
+	cb710_sg_miter_stop_writing(&miter);
+	return err;
+}
+
+static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
+{
+	struct sg_mapping_iter miter;
+	size_t len, blocks = data->blocks;
+	int err = 0;
+
+	/* TODO: I don't know how/if the hardware handles multiple
+	 * non-16B-boundary blocks */
+	if (unlikely(data->blocks > 1 && data->blksz & 15))
+		return -EINVAL;
+
+	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
+		0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
+
+	while (blocks-- > 0) {
+		len = (data->blksz + 15) >> 4;
+		do {
+			if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT)
+			    & CB710_MMC_S2_FIFO_EMPTY)) {
+				err = cb710_wait_for_event(slot,
+					CB710_MMC_S1_PIO_TRANSFER_DONE);
+				if (err)
+					goto out;
+			}
+			cb710_sg_dwiter_read_to_io(&miter,
+				slot->iobase + CB710_MMC_DATA_PORT, 4);
+		} while (--len);
+	}
+out:
+	sg_miter_stop(&miter);
+	return err;
+}
+
+static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader,
+	struct mmc_command *cmd)
+{
+	unsigned int flags = cmd->flags;
+	u16 cb_flags = 0;
+
+	/* Windows driver returned 0 for commands for which no response
+	 * is expected. It happened that there were only two such commands
+	 * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might
+	 * as well be a bug in that driver.
+	 *
+	 * Original driver set bit 14 for MMC/SD application
+	 * commands. There's no difference 'on the wire' and
+	 * it apparently works without it anyway.
+	 */
+
+	switch (flags & MMC_CMD_MASK) {
+	case MMC_CMD_AC:	cb_flags = CB710_MMC_CMD_AC;	break;
+	case MMC_CMD_ADTC:	cb_flags = CB710_MMC_CMD_ADTC;	break;
+	case MMC_CMD_BC:	cb_flags = CB710_MMC_CMD_BC;	break;
+	case MMC_CMD_BCR:	cb_flags = CB710_MMC_CMD_BCR;	break;
+	}
+
+	if (flags & MMC_RSP_BUSY)
+		cb_flags |= CB710_MMC_RSP_BUSY;
+
+	cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT;
+
+	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+		cb_flags |= CB710_MMC_DATA_READ;
+
+	if (flags & MMC_RSP_PRESENT) {
+		/* Windows driver set 01 at bits 4,3 except for
+		 * MMC_SET_BLOCKLEN where it set 10. Maybe the
+		 * hardware can do something special about this
+		 * command? The original driver looks buggy/incomplete
+		 * anyway so we ignore this for now.
+		 *
+		 * I assume that 00 here means no response is expected.
+		 */
+		cb_flags |= CB710_MMC_RSP_PRESENT;
+
+		if (flags & MMC_RSP_136)
+			cb_flags |= CB710_MMC_RSP_136;
+		if (!(flags & MMC_RSP_CRC))
+			cb_flags |= CB710_MMC_RSP_NO_CRC;
+	}
+
+	return cb_flags;
+}
+
+static void cb710_receive_response(struct cb710_slot *slot,
+	struct mmc_command *cmd)
+{
+	unsigned rsp_opcode, wanted_opcode;
+
+	/* Looks like final byte with CRC is always stripped (same as SDHCI) */
+	if (cmd->flags & MMC_RSP_136) {
+		u32 resp[4];
+
+		resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT);
+		resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT);
+		resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT);
+		resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+		rsp_opcode = resp[0] >> 24;
+
+		cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24);
+		cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24);
+		cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24);
+		cmd->resp[3] = (resp[3] << 8);
+	} else {
+		rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F;
+		cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT);
+	}
+
+	wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F;
+	if (rsp_opcode != wanted_opcode)
+		cmd->error = -EILSEQ;
+}
+
+static int cb710_mmc_transfer_data(struct cb710_slot *slot,
+	struct mmc_data *data)
+{
+	int error, to;
+
+	if (data->flags & MMC_DATA_READ)
+		error = cb710_mmc_receive(slot, data);
+	else
+		error = cb710_mmc_send(slot, data);
+
+	to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE);
+	if (!error)
+		error = to;
+
+	if (!error)
+		data->bytes_xfered = data->blksz * data->blocks;
+	return error;
+}
+
+static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_data *data = cmd->data;
+
+	u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd);
+	dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd);
+
+	if (data) {
+		if (!cb710_is_transfer_size_supported(data)) {
+			data->error = -EINVAL;
+			return -1;
+		}
+		cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz);
+	}
+
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10);
+	cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg);
+	cb710_mmc_reset_events(slot);
+	cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0);
+
+	cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT);
+	if (cmd->error)
+		return -1;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		cb710_receive_response(slot, cmd);
+		if (cmd->error)
+			return -1;
+	}
+
+	if (data)
+		data->error = cb710_mmc_transfer_data(slot, data);
+	return 0;
+}
+
+static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	WARN_ON(reader->mrq != NULL);
+
+	reader->mrq = mrq;
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+
+	if (cb710_mmc_is_card_inserted(slot)) {
+		if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop)
+			cb710_mmc_command(mmc, mrq->stop);
+		mdelay(1);
+	} else {
+		mrq->cmd->error = -ENOMEDIUM;
+	}
+
+	tasklet_schedule(&reader->finish_req_tasklet);
+}
+
+static int cb710_mmc_powerup(struct cb710_slot *slot)
+{
+#ifdef CONFIG_CB710_DEBUG
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+#endif
+	int err;
+
+	/* a lot of magic; see comment in cb710_mmc_set_clock() */
+	dev_dbg(cb710_slot_dev(slot), "bus powerup\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 1\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(1);
+	dev_dbg(cb710_slot_dev(slot), "after delay 2\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	mdelay(2);
+	dev_dbg(cb710_slot_dev(slot), "after delay 3\n");
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20);
+	if (unlikely(err))
+		return err;
+	/* This port behaves weird: quick byte reads of 0x08,0x09 return
+	 * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when
+	 * read/written from userspace...  What am I missing here?
+	 * (it doesn't depend on write-to-read delay) */
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+	dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n");
+
+	return cb710_check_event(slot, 0);
+}
+
+static void cb710_mmc_powerdown(struct cb710_slot *slot)
+{
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81);
+	cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80);
+}
+
+static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	int err;
+
+	cb710_mmc_set_clock(mmc, ios->clock);
+
+	if (!cb710_mmc_is_card_inserted(slot)) {
+		dev_dbg(cb710_slot_dev(slot),
+			"no card inserted - ignoring bus powerup request\n");
+		ios->power_mode = MMC_POWER_OFF;
+	}
+
+	if (ios->power_mode != reader->last_power_mode)
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+		err = cb710_mmc_powerup(slot);
+		if (err) {
+			dev_warn(cb710_slot_dev(slot),
+				"powerup failed (%d)- retrying\n", err);
+			cb710_mmc_powerdown(slot);
+			udelay(1);
+			err = cb710_mmc_powerup(slot);
+			if (err)
+				dev_warn(cb710_slot_dev(slot),
+					"powerup retry failed (%d) - expect errors\n",
+					err);
+		}
+		reader->last_power_mode = MMC_POWER_ON;
+		break;
+	case MMC_POWER_OFF:
+		cb710_mmc_powerdown(slot);
+		reader->last_power_mode = MMC_POWER_OFF;
+		break;
+	case MMC_POWER_UP:
+	default:
+		/* ignore */;
+	}
+
+	cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1);
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0);
+}
+
+static int cb710_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct cb710_slot *slot = cb710_mmc_to_slot(mmc);
+
+	return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT)
+		& CB710_MMC_S3_WRITE_PROTECTED;
+}
+
+static int cb710_mmc_irq_handler(struct cb710_slot *slot)
+{
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	u32 status, config1, config2, irqen;
+
+	status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT);
+	irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT);
+	config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT);
+	config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT);
+
+	dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, "
+		"ie: %08X, c2: %08X, c1: %08X\n",
+		status, irqen, config2, config1);
+
+	if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) {
+		/* ack the event */
+		cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT,
+			CB710_MMC_S1_CARD_CHANGED);
+		if ((irqen & CB710_MMC_IE_CISTATUS_MASK)
+		    == CB710_MMC_IE_CISTATUS_MASK)
+			mmc_detect_change(mmc, HZ/5);
+	} else {
+		dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n");
+		spin_lock(&reader->irq_lock);
+		__cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK);
+		spin_unlock(&reader->irq_lock);
+	}
+
+	return 1;
+}
+
+static void cb710_mmc_finish_request_tasklet(unsigned long data)
+{
+	struct mmc_host *mmc = (void *)data;
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+	struct mmc_request *mrq = reader->mrq;
+
+	reader->mrq = NULL;
+	mmc_request_done(mmc, mrq);
+}
+
+static const struct mmc_host_ops cb710_mmc_host = {
+	.request = cb710_mmc_request,
+	.set_ios = cb710_mmc_set_ios,
+	.get_ro = cb710_mmc_get_ro
+};
+
+#ifdef CONFIG_PM
+
+static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	int err;
+
+	err = mmc_suspend_host(mmc, state);
+	if (err)
+		return err;
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	return 0;
+}
+
+static int cb710_mmc_resume(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+
+	return mmc_resume_host(mmc);
+}
+
+#endif /* CONFIG_PM */
+
+static int __devinit cb710_mmc_init(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct cb710_chip *chip = cb710_slot_to_chip(slot);
+	struct mmc_host *mmc;
+	struct cb710_mmc_reader *reader;
+	int err;
+	u32 val;
+
+	mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot));
+	if (!mmc)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, mmc);
+
+	/* harmless (maybe) magic */
+	pci_read_config_dword(chip->pdev, 0x48, &val);
+	val = cb710_src_freq_mhz[(val >> 16) & 0xF];
+	dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val);
+	val *= 1000000;
+
+	mmc->ops = &cb710_mmc_host;
+	mmc->f_max = val;
+	mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
+	mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	reader = mmc_priv(mmc);
+
+	tasklet_init(&reader->finish_req_tasklet,
+		cb710_mmc_finish_request_tasklet, (unsigned long)mmc);
+	spin_lock_init(&reader->irq_lock);
+	cb710_dump_regs(chip, CB710_DUMP_REGS_MMC);
+
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, cb710_mmc_irq_handler);
+
+	err = mmc_add_host(mmc);
+	if (unlikely(err))
+		goto err_free_mmc;
+
+	dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n",
+		mmc_hostname(mmc));
+
+	cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0);
+
+	return 0;
+
+err_free_mmc:
+	dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err);
+
+	mmc_free_host(mmc);
+	return err;
+}
+
+static int __devexit cb710_mmc_exit(struct platform_device *pdev)
+{
+	struct cb710_slot *slot = cb710_pdev_to_slot(pdev);
+	struct mmc_host *mmc = cb710_slot_to_mmc(slot);
+	struct cb710_mmc_reader *reader = mmc_priv(mmc);
+
+	cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS);
+
+	mmc_remove_host(mmc);
+
+	/* IRQs should be disabled now, but let's stay on the safe side */
+	cb710_mmc_enable_irq(slot, 0, ~0);
+	cb710_set_irq_handler(slot, NULL);
+
+	/* clear config ports - just in case */
+	cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0);
+	cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0);
+
+	tasklet_kill(&reader->finish_req_tasklet);
+
+	mmc_free_host(mmc);
+	return 0;
+}
+
+static struct platform_driver cb710_mmc_driver = {
+	.driver.name = "cb710-mmc",
+	.probe = cb710_mmc_init,
+	.remove = __devexit_p(cb710_mmc_exit),
+#ifdef CONFIG_PM
+	.suspend = cb710_mmc_suspend,
+	.resume = cb710_mmc_resume,
+#endif
+};
+
+static int __init cb710_mmc_init_module(void)
+{
+	return platform_driver_register(&cb710_mmc_driver);
+}
+
+static void __exit cb710_mmc_cleanup_module(void)
+{
+	platform_driver_unregister(&cb710_mmc_driver);
+}
+
+module_init(cb710_mmc_init_module);
+module_exit(cb710_mmc_cleanup_module);
+
+MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>");
+MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cb710-mmc");
diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h
new file mode 100644
index 00000000000..e845c776bdd
--- /dev/null
+++ b/drivers/mmc/host/cb710-mmc.h
@@ -0,0 +1,104 @@
+/*
+ *  cb710/cb710-mmc.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_MMC_H
+#define LINUX_CB710_MMC_H
+
+#include <linux/cb710.h>
+
+/* per-MMC-reader structure */
+struct cb710_mmc_reader {
+	struct tasklet_struct finish_req_tasklet;
+	struct mmc_request *mrq;
+	spinlock_t irq_lock;
+	unsigned char last_power_mode;
+};
+
+/* some device struct walking */
+
+static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(&slot->pdev.dev);
+}
+
+static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
+{
+	struct platform_device *pdev = container_of(mmc_dev(mmc),
+		struct platform_device, dev);
+	return cb710_pdev_to_slot(pdev);
+}
+
+/* registers (this might be all wrong ;) */
+
+#define CB710_MMC_DATA_PORT		0x00
+
+#define CB710_MMC_CONFIG_PORT		0x04
+#define CB710_MMC_CONFIG0_PORT		0x04
+#define CB710_MMC_CONFIG1_PORT		0x05
+#define   CB710_MMC_C1_4BIT_DATA_BUS		0x40
+#define CB710_MMC_CONFIG2_PORT		0x06
+#define   CB710_MMC_C2_READ_PIO_SIZE_MASK	0x0F	/* N-1 */
+#define CB710_MMC_CONFIG3_PORT		0x07
+
+#define CB710_MMC_CONFIGB_PORT		0x08
+
+#define CB710_MMC_IRQ_ENABLE_PORT	0x0C
+#define   CB710_MMC_IE_TEST_MASK		0x00BF
+#define   CB710_MMC_IE_CARD_INSERTION_STATUS	0x1000
+#define   CB710_MMC_IE_IRQ_ENABLE		0x8000
+#define   CB710_MMC_IE_CISTATUS_MASK		\
+		(CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE)
+
+#define CB710_MMC_STATUS_PORT		0x10
+#define   CB710_MMC_STATUS_ERROR_EVENTS		0x60FF
+#define CB710_MMC_STATUS0_PORT		0x10
+#define   CB710_MMC_S0_FIFO_UNDERFLOW		0x40
+#define CB710_MMC_STATUS1_PORT		0x11
+#define   CB710_MMC_S1_COMMAND_SENT		0x01
+#define   CB710_MMC_S1_DATA_TRANSFER_DONE	0x02
+#define   CB710_MMC_S1_PIO_TRANSFER_DONE	0x04
+#define   CB710_MMC_S1_CARD_CHANGED		0x10
+#define   CB710_MMC_S1_RESET			0x20
+#define CB710_MMC_STATUS2_PORT		0x12
+#define   CB710_MMC_S2_FIFO_READY		0x01
+#define   CB710_MMC_S2_FIFO_EMPTY		0x02
+#define   CB710_MMC_S2_BUSY_10			0x10
+#define   CB710_MMC_S2_BUSY_20			0x20
+#define CB710_MMC_STATUS3_PORT		0x13
+#define   CB710_MMC_S3_CARD_DETECTED		0x02
+#define   CB710_MMC_S3_WRITE_PROTECTED		0x04
+
+#define CB710_MMC_CMD_TYPE_PORT		0x14
+#define   CB710_MMC_RSP_TYPE_MASK		0x0007
+#define     CB710_MMC_RSP_R1			(0)
+#define     CB710_MMC_RSP_136			(5)
+#define     CB710_MMC_RSP_NO_CRC		(2)
+#define   CB710_MMC_RSP_PRESENT_MASK		0x0018
+#define     CB710_MMC_RSP_NONE			(0 << 3)
+#define     CB710_MMC_RSP_PRESENT		(1 << 3)
+#define     CB710_MMC_RSP_PRESENT_X		(2 << 3)
+#define   CB710_MMC_CMD_TYPE_MASK		0x0060
+#define     CB710_MMC_CMD_BC			(0 << 5)
+#define     CB710_MMC_CMD_BCR			(1 << 5)
+#define     CB710_MMC_CMD_AC			(2 << 5)
+#define     CB710_MMC_CMD_ADTC			(3 << 5)
+#define   CB710_MMC_DATA_READ			0x0080
+#define   CB710_MMC_CMD_CODE_MASK		0x3F00
+#define   CB710_MMC_CMD_CODE_SHIFT		8
+#define   CB710_MMC_IS_APP_CMD			0x4000
+#define   CB710_MMC_RSP_BUSY			0x8000
+
+#define CB710_MMC_CMD_PARAM_PORT	0x18
+#define CB710_MMC_TRANSFER_SIZE_PORT	0x1C
+#define CB710_MMC_RESPONSE0_PORT	0x20
+#define CB710_MMC_RESPONSE1_PORT	0x24
+#define CB710_MMC_RESPONSE2_PORT	0x28
+#define CB710_MMC_RESPONSE3_PORT	0x2C
+
+#endif /* LINUX_CB710_MMC_H */
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index f48349d18c9..240608cc7ae 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -97,6 +97,14 @@
  */
 #define r1b_timeout		(HZ * 3)
 
+/* One of the critical speed parameters is the amount of data which may
+ * be transfered in one command. If this value is too low, the SD card
+ * controller has to do multiple partial block writes (argggh!). With
+ * today (2008) SD cards there is little speed gain if we transfer more
+ * than 64 KBytes at a time. So use this value until there is any indication
+ * that we should do more here.
+ */
+#define MMC_SPI_BLOCKSATONCE	128
 
 /****************************************************************************/
 
@@ -327,15 +335,16 @@ checkstatus:
 
 	/* Status byte: the entire seven-bit R1 response.  */
 	if (cmd->resp[0] != 0) {
-		if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
-				      | R1_SPI_ILLEGAL_COMMAND)
+		if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS)
 				& cmd->resp[0])
-			value = -EINVAL;
+			value = -EFAULT; /* Bad address */
+		else if (R1_SPI_ILLEGAL_COMMAND & cmd->resp[0])
+			value = -ENOSYS; /* Function not implemented */
 		else if (R1_SPI_COM_CRC & cmd->resp[0])
-			value = -EILSEQ;
+			value = -EILSEQ; /* Illegal byte sequence */
 		else if ((R1_SPI_ERASE_SEQ | R1_SPI_ERASE_RESET)
 				& cmd->resp[0])
-			value = -EIO;
+			value = -EIO;    /* I/O error */
 		/* else R1_SPI_IDLE, "it's resetting" */
 	}
 
@@ -1366,6 +1375,10 @@ static int mmc_spi_probe(struct spi_device *spi)
 
 	mmc->ops = &mmc_spi_ops;
 	mmc->max_blk_size = MMC_SPI_BLOCKSIZE;
+	mmc->max_hw_segs = MMC_SPI_BLOCKSATONCE;
+	mmc->max_phys_segs = MMC_SPI_BLOCKSATONCE;
+	mmc->max_req_size = MMC_SPI_BLOCKSATONCE * MMC_SPI_BLOCKSIZE;
+	mmc->max_blk_count = MMC_SPI_BLOCKSATONCE;
 
 	mmc->caps = MMC_CAP_SPI;
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7d4febdab28..e1aa8471ab1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -546,7 +546,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		host->mclk = clk_get_rate(host->clk);
 		DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
 	}
-	host->base = ioremap(dev->res.start, SZ_4K);
+	host->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!host->base) {
 		ret = -ENOMEM;
 		goto clk_disable;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f4cbe473670..bc14bb1b057 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -746,8 +746,6 @@ static int mxcmci_probe(struct platform_device *pdev)
 	}
 
 	mmc->f_min = clk_get_rate(host->clk) >> 16;
-	if (mmc->f_min < 400000)
-		mmc->f_min = 400000;
 	mmc->f_max = clk_get_rate(host->clk) >> 1;
 
 	/* recommended in data sheet */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index dceb5ee3bda..e7a331de573 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1593,7 +1593,6 @@ static int mmc_omap_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver mmc_omap_driver = {
-	.probe		= mmc_omap_probe,
 	.remove		= mmc_omap_remove,
 	.suspend	= mmc_omap_suspend,
 	.resume		= mmc_omap_resume,
@@ -1605,7 +1604,7 @@ static struct platform_driver mmc_omap_driver = {
 
 static int __init mmc_omap_init(void)
 {
-	return platform_driver_register(&mmc_omap_driver);
+	return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe);
 }
 
 static void __exit mmc_omap_exit(void)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index c40cb96255a..1cf9cfb3b64 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
 
-	mmc->ocr_avail = mmc_slot(host).ocr_mask;
 	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
 
 	if (pdata->slots[host->slot_id].wires >= 8)
@@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
+	/* initialize power supplies, gpios, etc */
 	if (pdata->init != NULL) {
 		if (pdata->init(&pdev->dev) != 0) {
-			dev_dbg(mmc_dev(host->mmc),
-				"Unable to configure MMC IRQs\n");
+			dev_dbg(mmc_dev(host->mmc), "late init error\n");
 			goto err_irq_cd_init;
 		}
 	}
+	mmc->ocr_avail = mmc_slot(host).ocr_mask;
 
 	/* Request IRQ for card detect */
 	if ((mmc_slot(host).card_detect_irq)) {
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 430095725f9..d7d7109ef47 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -27,6 +27,7 @@
 #include <linux/err.h>
 #include <linux/mmc/host.h>
 #include <linux/io.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/sizes.h>
 
@@ -67,8 +68,42 @@ struct pxamci_host {
 	unsigned int		dma_dir;
 	unsigned int		dma_drcmrrx;
 	unsigned int		dma_drcmrtx;
+
+	struct regulator	*vcc;
 };
 
+static inline void pxamci_init_ocr(struct pxamci_host *host)
+{
+#ifdef CONFIG_REGULATOR
+	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+
+	if (IS_ERR(host->vcc))
+		host->vcc = NULL;
+	else {
+		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+		if (host->pdata && host->pdata->ocr_mask)
+			dev_warn(mmc_dev(host->mmc),
+				"ocr_mask/setpower will not be used\n");
+	}
+#endif
+	if (host->vcc == NULL) {
+		/* fall-back to platform data */
+		host->mmc->ocr_avail = host->pdata ?
+			host->pdata->ocr_mask :
+			MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+}
+
+static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
+{
+#ifdef CONFIG_REGULATOR
+	if (host->vcc)
+		mmc_regulator_set_ocr(host->vcc, vdd);
+#endif
+	if (!host->vcc && host->pdata && host->pdata->setpower)
+		host->pdata->setpower(mmc_dev(host->mmc), vdd);
+}
+
 static void pxamci_stop_clock(struct pxamci_host *host)
 {
 	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
@@ -438,8 +473,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->power_mode != ios->power_mode) {
 		host->power_mode = ios->power_mode;
 
-		if (host->pdata && host->pdata->setpower)
-			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+		pxamci_set_power(host, ios->vdd);
 
 		if (ios->power_mode == MMC_POWER_ON)
 			host->cmdat |= CMDAT_INIT;
@@ -562,9 +596,8 @@ static int pxamci_probe(struct platform_device *pdev)
 	mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
 							  : host->clkrate;
 
-	mmc->ocr_avail = host->pdata ?
-			 host->pdata->ocr_mask :
-			 MMC_VDD_32_33|MMC_VDD_33_34;
+	pxamci_init_ocr(host);
+
 	mmc->caps = 0;
 	host->cmdat = 0;
 	if (!cpu_is_pxa25x()) {
@@ -661,6 +694,9 @@ static int pxamci_remove(struct platform_device *pdev)
 	if (mmc) {
 		struct pxamci_host *host = mmc_priv(mmc);
 
+		if (host->vcc)
+			regulator_put(host->vcc);
+
 		if (host->pdata && host->pdata->exit)
 			host->pdata->exit(&pdev->dev, mmc);
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2db166b7096..4eb4f37544a 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -17,6 +17,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
@@ -789,7 +790,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
 
 	last_source = source;
 
-	s3c2410_dma_devconfig(host->dma, source, 3,
+	s3c2410_dma_devconfig(host->dma, source,
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
@@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 	default:
 		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
new file mode 100644
index 00000000000..297f40ae6ad
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -0,0 +1,168 @@
+/*
+ * sdhci-pltfm.c Support for SDHCI platform devices
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform devices
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/io.h>
+
+#include "sdhci.h"
+
+/*****************************************************************************\
+ *                                                                           *
+ * SDHCI core callbacks                                                      *
+ *                                                                           *
+\*****************************************************************************/
+
+static struct sdhci_ops sdhci_pltfm_ops = {
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Device probing/removal                                                    *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct resource *iomem;
+	int ret;
+
+	BUG_ON(pdev == NULL);
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (resource_size(iomem) != 0x100)
+		dev_err(&pdev->dev, "Invalid iomem size. You may "
+			"experience problems.\n");
+
+	if (pdev->dev.parent)
+		host = sdhci_alloc_host(pdev->dev.parent, 0);
+	else
+		host = sdhci_alloc_host(&pdev->dev, 0);
+
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		goto err;
+	}
+
+	host->hw_name = "platform";
+	host->ops = &sdhci_pltfm_ops;
+	host->irq = platform_get_irq(pdev, 0);
+
+	if (!request_mem_region(iomem->start, resource_size(iomem),
+		mmc_hostname(host->mmc))) {
+		dev_err(&pdev->dev, "cannot request region\n");
+		ret = -EBUSY;
+		goto err_request;
+	}
+
+	host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+	if (!host->ioaddr) {
+		dev_err(&pdev->dev, "failed to remap registers\n");
+		ret = -ENOMEM;
+		goto err_remap;
+	}
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_add_host;
+
+	platform_set_drvdata(pdev, host);
+
+	return 0;
+
+err_add_host:
+	iounmap(host->ioaddr);
+err_remap:
+	release_mem_region(iomem->start, resource_size(iomem));
+err_request:
+	sdhci_free_host(host);
+err:
+	printk(KERN_ERR"Probing of sdhci-pltfm failed: %d\n", ret);
+	return ret;
+}
+
+static int __devexit sdhci_pltfm_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int dead;
+	u32 scratch;
+
+	dead = 0;
+	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+	if (scratch == (u32)-1)
+		dead = 1;
+
+	sdhci_remove_host(host, dead);
+	iounmap(host->ioaddr);
+	release_mem_region(iomem->start, resource_size(iomem));
+	sdhci_free_host(host);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver sdhci_pltfm_driver = {
+	.driver = {
+		.name	= "sdhci",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= sdhci_pltfm_probe,
+	.remove		= __devexit_p(sdhci_pltfm_remove),
+};
+
+/*****************************************************************************\
+ *                                                                           *
+ * Driver init/exit                                                          *
+ *                                                                           *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+	return platform_driver_register(&sdhci_pltfm_driver);
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+	platform_driver_unregister(&sdhci_pltfm_driver);
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sdhci");
+
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9234be2226e..35789c6edc1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -78,6 +78,11 @@ static void sdhci_dumpregs(struct sdhci_host *host)
 		sdhci_readl(host, SDHCI_CAPABILITIES),
 		sdhci_readl(host, SDHCI_MAX_CURRENT));
 
+	if (host->flags & SDHCI_USE_ADMA)
+		printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+		       readl(host->ioaddr + SDHCI_ADMA_ERROR),
+		       readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+
 	printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
 }
 
@@ -1005,12 +1010,34 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
 	u8 pwr;
 
-	if (host->power == power)
+	if (power == (unsigned short)-1)
+		pwr = 0;
+	else {
+		switch (1 << power) {
+		case MMC_VDD_165_195:
+			pwr = SDHCI_POWER_180;
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			pwr = SDHCI_POWER_300;
+			break;
+		case MMC_VDD_32_33:
+		case MMC_VDD_33_34:
+			pwr = SDHCI_POWER_330;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+	if (host->pwr == pwr)
 		return;
 
-	if (power == (unsigned short)-1) {
+	host->pwr = pwr;
+
+	if (pwr == 0) {
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-		goto out;
+		return;
 	}
 
 	/*
@@ -1020,35 +1047,16 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
-	pwr = SDHCI_POWER_ON;
-
-	switch (1 << power) {
-	case MMC_VDD_165_195:
-		pwr |= SDHCI_POWER_180;
-		break;
-	case MMC_VDD_29_30:
-	case MMC_VDD_30_31:
-		pwr |= SDHCI_POWER_300;
-		break;
-	case MMC_VDD_32_33:
-	case MMC_VDD_33_34:
-		pwr |= SDHCI_POWER_330;
-		break;
-	default:
-		BUG();
-	}
-
 	/*
 	 * At least the Marvell CaFe chip gets confused if we set the voltage
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
 	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
-		sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
-	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+	pwr |= SDHCI_POWER_ON;
 
-out:
-	host->power = power;
+	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 }
 
 /*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 65c6f996bbd..2de08349c3c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -255,7 +255,7 @@ struct sdhci_host {
 	unsigned int		timeout_clk;	/* Timeout freq (KHz) */
 
 	unsigned int		clock;		/* Current clock (MHz) */
-	unsigned short		power;		/* Current voltage */
+	u8			pwr;		/* Current voltage */
 
 	struct mmc_request	*mrq;		/* Current request */
 	struct mmc_command	*cmd;		/* Current command */
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 63fbd5b7d31..91991b460c4 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -10,7 +10,7 @@
  *
  * Driver for the MMC / SD / SDIO cell found in:
  *
- * TC6393XB TC6391XB TC6387XB T7L66XB
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
  *
  * This driver draws mainly on scattered spec sheets, Reverse engineering
  * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
@@ -35,69 +35,47 @@
 
 #include "tmio_mmc.h"
 
-/*
- * Fixme - documentation conflicts on what the clock values are for the
- * various dividers.
- * One document I have says that its a divisor of a 24MHz clock, another 33.
- * This probably depends on HCLK for a given platform, so we may need to
- * require HCLK be passed to us from the MFD core.
- *
- */
-
 static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
 {
-	void __iomem *cnf = host->cnf;
-	void __iomem *ctl = host->ctl;
 	u32 clk = 0, clock;
 
 	if (new_clock) {
-		for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+		for (clock = host->mmc->f_min, clk = 0x80000080;
+			new_clock >= (clock<<1); clk >>= 1)
 			clock <<= 1;
-			clk >>= 1;
-		}
-		if (clk & 0x1)
-			clk = 0x20000;
-
-		clk >>= 2;
-		tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
 		clk |= 0x100;
 	}
 
-	tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+	sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
 }
 
 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
-	tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
 	msleep(10);
-	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
-	       ctl + CTL_SD_CARD_CLK_CTL);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 &
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
 }
 
 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
-	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
-	       ctl + CTL_SD_CARD_CLK_CTL);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
+		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
-	tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+	sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
 	msleep(10);
 }
 
 static void reset(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
-
 	/* FIXME - should we set stop clock reg here */
-	tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
-	tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
+	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
 	msleep(10);
-	tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
-	tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+	sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
 	msleep(10);
 }
 
@@ -129,13 +107,12 @@ tmio_mmc_finish_request(struct tmio_mmc_host *host)
 static int
 tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	int c = cmd->opcode;
 
 	/* Command 12 is handled by hardware */
 	if (cmd->opcode == 12 && !cmd->arg) {
-		tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
 		return 0;
 	}
 
@@ -160,18 +137,18 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 	if (data) {
 		c |= DATA_PRESENT;
 		if (data->blocks > 1) {
-			tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100);
 			c |= TRANSFER_MULTI;
 		}
 		if (data->flags & MMC_DATA_READ)
 			c |= TRANSFER_READ;
 	}
 
-	enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+	enable_mmc_irqs(host, TMIO_MASK_CMD);
 
 	/* Fire off the command */
-	tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
-	tmio_iowrite16(c, ctl + CTL_SD_CMD);
+	sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg);
+	sd_ctrl_write16(host, CTL_SD_CMD, c);
 
 	return 0;
 }
@@ -183,7 +160,6 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
  */
 static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	unsigned short *buf;
 	unsigned int count;
@@ -206,9 +182,9 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 	/* Transfer the data */
 	if (data->flags & MMC_DATA_READ)
-		tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+		sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
 	else
-		tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+		sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
 
 	host->sg_off += count;
 
@@ -222,7 +198,6 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 {
-	void __iomem *ctl = host->ctl;
 	struct mmc_data *data = host->data;
 	struct mmc_command *stop;
 
@@ -251,13 +226,13 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 	 */
 
 	if (data->flags & MMC_DATA_READ)
-		disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+		disable_mmc_irqs(host, TMIO_MASK_READOP);
 	else
-		disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+		disable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 
 	if (stop) {
 		if (stop->opcode == 12 && !stop->arg)
-			tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
 		else
 			BUG();
 	}
@@ -268,9 +243,8 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	unsigned int stat)
 {
-	void __iomem *ctl = host->ctl, *addr;
 	struct mmc_command *cmd = host->cmd;
-	int i;
+	int i, addr;
 
 	if (!host->cmd) {
 		pr_debug("Spurious CMD irq\n");
@@ -284,8 +258,8 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	 * modify the order of the response for short response command types.
 	 */
 
-	for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
-		cmd->resp[i] = tmio_ioread32(addr);
+	for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+		cmd->resp[i] = sd_ctrl_read32(host, addr);
 
 	if (cmd->flags &  MMC_RSP_136) {
 		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
@@ -307,9 +281,9 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 	 */
 	if (host->data && !cmd->error) {
 		if (host->data->flags & MMC_DATA_READ)
-			enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+			enable_mmc_irqs(host, TMIO_MASK_READOP);
 		else
-			enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+			enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 	} else {
 		tmio_mmc_finish_request(host);
 	}
@@ -321,20 +295,19 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
 static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 {
 	struct tmio_mmc_host *host = devid;
-	void __iomem *ctl = host->ctl;
 	unsigned int ireg, irq_mask, status;
 
 	pr_debug("MMC IRQ begin\n");
 
-	status = tmio_ioread32(ctl + CTL_STATUS);
-	irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+	status = sd_ctrl_read32(host, CTL_STATUS);
+	irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
 	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
 
 	pr_debug_status(status);
 	pr_debug_status(ireg);
 
 	if (!ireg) {
-		disable_mmc_irqs(ctl, status & ~irq_mask);
+		disable_mmc_irqs(host, status & ~irq_mask);
 
 		pr_debug("tmio_mmc: Spurious irq, disabling! "
 			"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
@@ -346,7 +319,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 	while (ireg) {
 		/* Card insert / remove attempts */
 		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
-			ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+			ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
 				TMIO_STAT_CARD_REMOVE);
 			mmc_detect_change(host->mmc, 0);
 		}
@@ -358,25 +331,25 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
 
 		/* Command completion */
 		if (ireg & TMIO_MASK_CMD) {
-			ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+			ack_mmc_irqs(host, TMIO_MASK_CMD);
 			tmio_mmc_cmd_irq(host, status);
 		}
 
 		/* Data transfer */
 		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
-			ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+			ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
 			tmio_mmc_pio_irq(host);
 		}
 
 		/* Data transfer completion */
 		if (ireg & TMIO_STAT_DATAEND) {
-			ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+			ack_mmc_irqs(host, TMIO_STAT_DATAEND);
 			tmio_mmc_data_irq(host);
 		}
 
 		/* Check status - keep going until we've handled it all */
-		status = tmio_ioread32(ctl + CTL_STATUS);
-		irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+		status = sd_ctrl_read32(host, CTL_STATUS);
+		irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK);
 		ireg = status & TMIO_MASK_IRQ & ~irq_mask;
 
 		pr_debug("Status at end of loop: %08x\n", status);
@@ -391,8 +364,6 @@ out:
 static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 	struct mmc_data *data)
 {
-	void __iomem *ctl = host->ctl;
-
 	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
 	    data->blksz, data->blocks);
 
@@ -407,8 +378,8 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 	host->data = data;
 
 	/* Set transfer length / blocksize */
-	tmio_iowrite16(data->blksz,  ctl + CTL_SD_XFER_LEN);
-	tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
+	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
 
 	return 0;
 }
@@ -449,8 +420,6 @@ fail:
 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *cnf = host->cnf;
-	void __iomem *ctl = host->ctl;
 
 	if (ios->clock)
 		tmio_mmc_set_clock(host, ios->clock);
@@ -458,12 +427,12 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	/* Power sequence - OFF -> ON -> UP */
 	switch (ios->power_mode) {
 	case MMC_POWER_OFF: /* power down SD bus */
-		tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+		sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
 		tmio_mmc_clk_stop(host);
 		break;
 	case MMC_POWER_ON: /* power up SD bus */
 
-		tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+		sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
 		break;
 	case MMC_POWER_UP: /* start bus clock */
 		tmio_mmc_clk_start(host);
@@ -472,10 +441,10 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_1:
-		tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
 	break;
 	case MMC_BUS_WIDTH_4:
-		tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
 	break;
 	}
 
@@ -486,9 +455,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 static int tmio_mmc_get_ro(struct mmc_host *mmc)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *ctl = host->ctl;
 
-	return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+	return (sd_ctrl_read16(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
 }
 
 static struct mmc_host_ops tmio_mmc_ops = {
@@ -518,13 +486,8 @@ static int tmio_mmc_resume(struct platform_device *dev)
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
 	struct mmc_host *mmc = platform_get_drvdata(dev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
-	void __iomem *cnf = host->cnf;
 	int ret = 0;
 
-	/* Enable the MMC/SD Control registers */
-	tmio_iowrite16(SDCREN, cnf + CNF_CMD);
-	tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
 		ret = cell->enable(dev);
@@ -532,6 +495,11 @@ static int tmio_mmc_resume(struct platform_device *dev)
 			goto out;
 	}
 
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(host, CNF_CMD, SDCREN);
+	sd_config_write32(host, CNF_CTL_BASE,
+		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
 	mmc_resume_host(mmc);
 
 out:
@@ -545,20 +513,25 @@ out:
 static int __devinit tmio_mmc_probe(struct platform_device *dev)
 {
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct tmio_mmc_data *pdata;
 	struct resource *res_ctl, *res_cnf;
 	struct tmio_mmc_host *host;
 	struct mmc_host *mmc;
-	int ret = -ENOMEM;
+	int ret = -EINVAL;
 
 	if (dev->num_resources != 3)
 		goto out;
 
 	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	if (!res_ctl || !res_cnf) {
-		ret = -EINVAL;
+	if (!res_ctl || !res_cnf)
 		goto out;
-	}
+
+	pdata = cell->driver_data;
+	if (!pdata || !pdata->hclk)
+		goto out;
+
+	ret = -ENOMEM;
 
 	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
 	if (!mmc)
@@ -568,6 +541,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 	host->mmc = mmc;
 	platform_set_drvdata(dev, mmc);
 
+	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+	host->bus_shift = resource_size(res_ctl) >> 10;
+
 	host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
 	if (!host->ctl)
 		goto host_free;
@@ -578,15 +554,10 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 
 	mmc->ops = &tmio_mmc_ops;
 	mmc->caps = MMC_CAP_4_BIT_DATA;
-	mmc->f_min = 46875; /* 24000000 / 512 */
-	mmc->f_max = 24000000;
+	mmc->f_max = pdata->hclk;
+	mmc->f_min = mmc->f_max / 512;
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
-	/* Enable the MMC/SD Control registers */
-	tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
-	tmio_iowrite32(dev->resource[0].start & 0xfffe,
-		host->cnf + CNF_CTL_BASE);
-
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->enable) {
 		ret = cell->enable(dev);
@@ -594,14 +565,19 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 			goto unmap_cnf;
 	}
 
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(host, CNF_CMD, SDCREN);
+	sd_config_write32(host, CNF_CTL_BASE,
+		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
+
 	/* Disable SD power during suspend */
-	tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+	sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
 
 	/* The below is required but why? FIXME */
-	tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+	sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
 
 	/* Power down SD bus*/
-	tmio_iowrite8(0x0,  host->cnf + CNF_PWR_CTL_2);
+	sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
 
 	tmio_mmc_clk_stop(host);
 	reset(host);
@@ -612,22 +588,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
 	else
 		goto unmap_cnf;
 
-	disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+	disable_mmc_irqs(host, TMIO_MASK_ALL);
 
-	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
-		host);
+	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
+		IRQF_TRIGGER_FALLING, "tmio-mmc", host);
 	if (ret)
 		goto unmap_cnf;
 
-	set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
-
 	mmc_add_host(mmc);
 
 	printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
 	       (unsigned long)host->ctl, host->irq);
 
 	/* Unmask the IRQs we want to know about */
-	enable_mmc_irqs(host->ctl,  TMIO_MASK_IRQ);
+	enable_mmc_irqs(host, TMIO_MASK_IRQ);
 
 	return 0;
 
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9c831ab2ece..9fa99859497 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -83,34 +83,36 @@
 		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
 #define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
 
-#define enable_mmc_irqs(ctl, i) \
+
+#define enable_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
 		mask &= ~((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
 	} while (0)
 
-#define disable_mmc_irqs(ctl, i) \
+#define disable_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask  = sd_ctrl_read32((host), CTL_IRQ_MASK); \
 		mask |= ((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+		sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \
 	} while (0)
 
-#define ack_mmc_irqs(ctl, i) \
+#define ack_mmc_irqs(host, i) \
 	do { \
 		u32 mask;\
-		mask  = tmio_ioread32((ctl) + CTL_STATUS); \
+		mask  = sd_ctrl_read32((host), CTL_STATUS); \
 		mask &= ~((i) & TMIO_MASK_IRQ); \
-		tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+		sd_ctrl_write32((host), CTL_STATUS, mask); \
 	} while (0)
 
 
 struct tmio_mmc_host {
 	void __iomem *cnf;
 	void __iomem *ctl;
+	unsigned long bus_shift;
 	struct mmc_command      *cmd;
 	struct mmc_request      *mrq;
 	struct mmc_data         *data;
@@ -123,6 +125,63 @@ struct tmio_mmc_host {
 	unsigned int            sg_off;
 };
 
+#include <linux/io.h>
+
+static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
+{
+	return readw(host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
+		u16 *buf, int count)
+{
+	readsw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
+{
+	return readw(host->ctl + (addr << host->bus_shift)) |
+	       readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
+}
+
+static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr,
+		u16 val)
+{
+	writew(val, host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
+		u16 *buf, int count)
+{
+	writesw(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr,
+		u32 val)
+{
+	writew(val, host->ctl + (addr << host->bus_shift));
+	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
+}
+
+static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
+		u8 val)
+{
+	writeb(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
+		u16 val)
+{
+	writew(val, host->cnf + (addr << host->bus_shift));
+}
+
+static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
+		u32 val)
+{
+	writew(val, host->cnf + (addr << host->bus_shift));
+	writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
+}
+
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
 
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 7d04fb9ddca..b8e35a0b4d7 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -154,7 +154,8 @@ config MTD_AFS_PARTS
 
 	  You will still need the parsing functions to be called by the driver
 	  for your particular device. It won't happen automatically. The
-	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+	  'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for
+	  example.
 
 config MTD_OF_PARTS
 	tristate "Flash partition map based on OF description"
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 6fde0a2e356..325fab92a62 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -49,7 +49,7 @@ config MTD_MS02NV
 	  If you want to compile this driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called ms02-nv.ko.
+	  The module will be called ms02-nv.
 
 config MTD_DATAFLASH
 	tristate "Support for AT45xxx DataFlash"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 890936d0275..f3276897859 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE
 	help
           This enables the driver for the NAND flash device found on the
           Basler eXcite Smart Camera. If built as a module, the driver
-          will be named "excite_nandflash.ko".
+          will be named excite_nandflash.
 
 config MTD_NAND_CAFE
 	tristate "NAND support for OLPC CAFÉ chip"
@@ -282,7 +282,7 @@ config MTD_NAND_CS553X
 	  controller is enabled for NAND, and currently requires that
 	  the controller be in MMIO mode.
 
-	  If you say "m", the module will be called "cs553x_nand.ko".
+	  If you say "m", the module will be called cs553x_nand.
 
 config MTD_NAND_ATMEL
 	tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index f2e9de1414d..6391e3dc800 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -39,7 +39,6 @@
 #include <mach/gpmc.h>
 #include <mach/onenand.h>
 #include <mach/gpio.h>
-#include <mach/pm.h>
 
 #include <mach/dma.h>
 
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 1c5344aa57c..367bec63620 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -281,7 +281,7 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 		autoirq = probe_irq_off(irq_mask);
 
 		if (autoirq == 0) {
-			printk(KERN_WARNING "%s probe at %#x failed to detect IRQ line.\n",
+			pr_warning("%s probe at %#x failed to detect IRQ line.\n",
 				mname, ioaddr);
 			release_region(ioaddr, EL1_IO_EXTENT);
 			return -EAGAIN;
@@ -297,16 +297,16 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 	if (autoirq)
 		dev->irq = autoirq;
 
-	printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
+	pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
 			dev->name, mname, dev->base_addr,
 			autoirq ? "auto":"assigned ", dev->irq);
 
 #ifdef CONFIG_IP_MULTICAST
-	printk(KERN_WARNING "WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
+	pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
 #endif
 
 	if (el_debug)
-		printk(KERN_DEBUG "%s", version);
+		pr_debug("%s", version);
 
 	lp = netdev_priv(dev);
 	memset(lp, 0, sizeof(struct net_local));
@@ -343,7 +343,7 @@ static int el_open(struct net_device *dev)
 	unsigned long flags;
 
 	if (el_debug > 2)
-		printk(KERN_DEBUG "%s: Doing el_open()...", dev->name);
+		pr_debug("%s: Doing el_open()...\n", dev->name);
 
 	retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev);
 	if (retval)
@@ -374,7 +374,7 @@ static void el_timeout(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el_debug)
-		printk(KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
+		pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
 			dev->name, inb(TX_STATUS),
 			inb(AX_STATUS), inb(RX_STATUS));
 	dev->stats.tx_errors++;
@@ -483,14 +483,13 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			lp->loading = 0;
 			dev->trans_start = jiffies;
 			if (el_debug > 2)
-				printk(KERN_DEBUG " queued xmit.\n");
+				pr_debug(" queued xmit.\n");
 			dev_kfree_skb(skb);
 			return 0;
 		}
 		/* A receive upset our load, despite our best efforts */
 		if (el_debug > 2)
-			printk(KERN_DEBUG "%s: burped during tx load.\n",
-				dev->name);
+			pr_debug("%s: burped during tx load.\n", dev->name);
 		spin_lock_irqsave(&lp->lock, flags);
 	} while (1);
 }
@@ -540,11 +539,10 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 	 */
 
 	if (el_debug > 3)
-		printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x",
-							dev->name, axsr);
+		pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr);
 
 	if (lp->loading == 1 && !lp->txing)
-		printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
+		pr_warning("%s: Inconsistent state loading while not in tx\n",
 			dev->name);
 
 	if (lp->txing) {
@@ -555,19 +553,17 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 		int txsr = inb(TX_STATUS);
 
 		if (lp->loading == 1) {
-			if (el_debug > 2) {
-				printk(KERN_DEBUG "%s: Interrupt while loading [",
-					dev->name);
-				printk(" txsr=%02x gp=%04x rp=%04x]\n",
-					txsr, inw(GP_LOW), inw(RX_LOW));
-			}
+			if (el_debug > 2)
+				pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n",
+					dev->name, txsr, inw(GP_LOW), inw(RX_LOW));
+
 			/* Force a reload */
 			lp->loading = 2;
 			spin_unlock(&lp->lock);
 			goto out;
 		}
 		if (el_debug > 6)
-			printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x",
+			pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name,
 					txsr, inw(GP_LOW), inw(RX_LOW));
 
 		if ((axsr & 0x80) && (txsr & TX_READY) == 0) {
@@ -576,7 +572,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 *	on trying or reset immediately ?
 			 */
 			if (el_debug > 1)
-				printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
+				pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
 					dev->name, txsr, axsr,
 					inw(ioaddr + EL1_DATAPTR),
 					inw(ioaddr + EL1_RXPTR));
@@ -587,7 +583,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 *	Timed out
 			 */
 			if (el_debug)
-				printk(KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
+				pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
 			outb(AX_SYS, AX_CMD);
 			lp->txing = 0;
 			dev->stats.tx_aborted_errors++;
@@ -598,7 +594,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 */
 
 			if (el_debug > 6)
-				printk(KERN_DEBUG " retransmitting after a collision.\n");
+				pr_debug("%s: retransmitting after a collision.\n", dev->name);
 			/*
 			 *	Poor little chip can't reset its own start
 			 *	pointer
@@ -616,9 +612,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 */
 			dev->stats.tx_packets++;
 			if (el_debug > 6)
-				printk(KERN_DEBUG " Tx succeeded %s\n",
-					(txsr & TX_RDY) ? "." :
-							"but tx is busy!");
+				pr_debug("%s: Tx succeeded %s\n", dev->name,
+					(txsr & TX_RDY) ? "." : "but tx is busy!");
 			/*
 			 *	This is safe the interrupt is atomic WRT itself.
 			 */
@@ -633,7 +628,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 
 		int rxsr = inb(RX_STATUS);
 		if (el_debug > 5)
-			printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS), inw(RX_LOW));
+			pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n",
+				dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW));
 		/*
 		 *	Just reading rx_status fixes most errors.
 		 */
@@ -643,7 +639,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			/* Handled to avoid board lock-up. */
 			dev->stats.rx_length_errors++;
 			if (el_debug > 5)
-				printk(KERN_DEBUG " runt.\n");
+				pr_debug("%s: runt.\n", dev->name);
 		} else if (rxsr & RX_GOOD) {
 			/*
 			 *	Receive worked.
@@ -654,12 +650,10 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			 *	Nothing?  Something is broken!
 			 */
 			if (el_debug > 2)
-				printk(KERN_DEBUG "%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
+				pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
 					dev->name, rxsr);
 			el_reset(dev);
 		}
-		if (el_debug > 3)
-			printk(KERN_DEBUG ".\n");
 	}
 
 	/*
@@ -695,11 +689,11 @@ static void el_receive(struct net_device *dev)
 	pkt_len = inw(RX_LOW);
 
 	if (el_debug > 4)
-		printk(KERN_DEBUG " el_receive %d.\n", pkt_len);
+		pr_debug(" el_receive %d.\n", pkt_len);
 
 	if (pkt_len < 60 || pkt_len > 1536) {
 		if (el_debug)
-			printk(KERN_DEBUG "%s: bogus packet, length=%d\n",
+			pr_debug("%s: bogus packet, length=%d\n",
 						dev->name, pkt_len);
 		dev->stats.rx_over_errors++;
 		return;
@@ -718,8 +712,7 @@ static void el_receive(struct net_device *dev)
 
 	outw(0x00, GP_LOW);
 	if (skb == NULL) {
-		printk(KERN_INFO "%s: Memory squeeze, dropping packet.\n",
-								dev->name);
+		pr_info("%s: Memory squeeze, dropping packet.\n", dev->name);
 		dev->stats.rx_dropped++;
 		return;
 	} else {
@@ -753,7 +746,7 @@ static void  el_reset(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el_debug > 2)
-		printk(KERN_INFO "3c501 reset...");
+		pr_info("3c501 reset...\n");
 	outb(AX_RESET, AX_CMD);		/* Reset the chip */
 	/* Aux control, irq and loopback enabled */
 	outb(AX_LOOP, AX_CMD);
@@ -787,7 +780,7 @@ static int el1_close(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el_debug > 2)
-		printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n",
+		pr_info("%s: Shutting down Ethernet card at %#x.\n",
 						dev->name, ioaddr);
 
 	netif_stop_queue(dev);
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index 4f08bd99583..134638a9759 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -234,16 +234,16 @@ el2_probe1(struct net_device *dev, int ioaddr)
     }
 
     if (ei_debug  &&  version_printed++ == 0)
-	printk(version);
+	pr_debug("%s", version);
 
     dev->base_addr = ioaddr;
 
-    printk("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
+    pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
 
     /* Retrieve and print the ethernet address. */
     for (i = 0; i < 6; i++)
 	dev->dev_addr[i] = inb(ioaddr + i);
-    printk("%pM", dev->dev_addr);
+    pr_cont("%pM", dev->dev_addr);
 
     /* Map the 8390 back into the window. */
     outb(ECNTRL_THIN, ioaddr + 0x406);
@@ -256,7 +256,8 @@ el2_probe1(struct net_device *dev, int ioaddr)
     outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
 
     /* Probe for, turn on and clear the board's shared memory. */
-    if (ei_debug > 2) printk(" memory jumpers %2.2x ", membase_reg);
+    if (ei_debug > 2)
+	pr_cont(" memory jumpers %2.2x ", membase_reg);
     outb(EGACFR_NORM, ioaddr + 0x405);	/* Enable RAM */
 
     /* This should be probed for (or set via an ioctl()) at run-time.
@@ -268,7 +269,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
 #else
     ei_status.interface_num = dev->mem_end & 0xf;
 #endif
-    printk(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
+    pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
 
     if ((membase_reg & 0xf0) == 0) {
 	dev->mem_start = 0;
@@ -292,7 +293,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
 		writel(test_val, mem_base + i);
 		if (readl(mem_base) != 0xba5eba5e
 		    || readl(mem_base + i) != test_val) {
-		    printk("3c503: memory failure or memory address conflict.\n");
+		    pr_warning("3c503: memory failure or memory address conflict.\n");
 		    dev->mem_start = 0;
 		    ei_status.name = "3c503-PIO";
 		    iounmap(mem_base);
@@ -344,7 +345,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
     if (dev->irq == 2)
 	dev->irq = 9;
     else if (dev->irq > 5 && dev->irq != 9) {
-	printk("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
+	pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
 	       dev->irq);
 	dev->irq = 0;
     }
@@ -359,7 +360,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
 	goto out1;
 
     if (dev->mem_start)
-	printk("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
+	pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
 		dev->name, ei_status.name, (wordlength+1)<<3,
 		dev->mem_start, dev->mem_end-1);
 
@@ -367,7 +368,7 @@ el2_probe1(struct net_device *dev, int ioaddr)
     {
 	ei_status.tx_start_page = EL2_MB1_START_PG;
 	ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
-	printk("\n%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
+	pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
 	       dev->name, ei_status.name, (wordlength+1)<<3);
     }
     release_region(ioaddr + 0x400, 8);
@@ -435,15 +436,16 @@ static void
 el2_reset_8390(struct net_device *dev)
 {
     if (ei_debug > 1) {
-	printk("%s: Resetting the 3c503 board...", dev->name);
-	printk("%#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
+	pr_debug("%s: Resetting the 3c503 board...", dev->name);
+	pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
 	       E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR));
     }
     outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL);
     ei_status.txing = 0;
     outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
     el2_init_card(dev);
-    if (ei_debug > 1) printk("done\n");
+    if (ei_debug > 1)
+	pr_cont("done\n");
 }
 
 /* Initialize the 3c503 GA registers after a reset. */
@@ -529,7 +531,7 @@ el2_block_output(struct net_device *dev, int count,
         {
             if(!boguscount--)
             {
-                printk("%s: FIFO blocked in el2_block_output.\n", dev->name);
+                pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name);
                 el2_reset_8390(dev);
                 goto blocked;
             }
@@ -581,7 +583,7 @@ el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_pag
     {
         if(!boguscount--)
         {
-            printk("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
+            pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
             memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr));
             el2_reset_8390(dev);
             goto blocked;
@@ -645,7 +647,7 @@ el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring
         {
             if(!boguscount--)
             {
-                printk("%s: FIFO blocked in el2_block_input.\n", dev->name);
+                pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name);
                 el2_reset_8390(dev);
                 goto blocked;
             }
@@ -707,7 +709,7 @@ init_module(void)
 	for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
 		if (io[this_dev] == 0)  {
 			if (this_dev != 0) break; /* only autoprobe 1st one */
-			printk(KERN_NOTICE "3c503.c: Presently autoprobing (not recommended) for a single card.\n");
+			pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n");
 		}
 		dev = alloc_eip_netdev();
 		if (!dev)
@@ -720,7 +722,7 @@ init_module(void)
 			continue;
 		}
 		free_netdev(dev);
-		printk(KERN_WARNING "3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
+		pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
 		break;
 	}
 	if (found)
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index 2de1c9cd7bd..f71b3540275 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -126,26 +126,25 @@
  *
  *********************************************************/
 
-static const char filename[] = __FILE__;
+#define filename __FILE__
 
-static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
+#define timeout_msg "*** timeout at %s:%s (line %d) ***\n"
 #define TIMEOUT_MSG(lineno) \
-	printk(timeout_msg, filename,__func__,(lineno))
+	pr_notice(timeout_msg, filename, __func__, (lineno))
 
-static const char invalid_pcb_msg[] =
-"*** invalid pcb length %d at %s:%s (line %d) ***\n";
+#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n"
 #define INVALID_PCB_MSG(len) \
-	printk(invalid_pcb_msg, (len),filename,__func__,__LINE__)
+	pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__)
 
-static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
+#define search_msg "%s: Looking for 3c505 adapter at address %#x..."
 
-static char stilllooking_msg[] __initdata = "still looking...";
+#define stilllooking_msg "still looking..."
 
-static char found_msg[] __initdata = "found.\n";
+#define found_msg "found.\n"
 
-static char notfound_msg[] __initdata = "not found (reason = %d)\n";
+#define notfound_msg "not found (reason = %d)\n"
 
-static char couldnot_msg[] __initdata = KERN_INFO "%s: 3c505 not found\n";
+#define couldnot_msg "%s: 3c505 not found\n"
 
 /*********************************************************
  *
@@ -284,7 +283,7 @@ static inline void adapter_reset(struct net_device *dev)
 
 	outb_control(orig_hcr, dev);
 	if (!start_receive(dev, &adapter->tx_pcb))
-		printk(KERN_ERR "%s: start receive command failed \n", dev->name);
+		pr_err("%s: start receive command failed\n", dev->name);
 }
 
 /* Check to make sure that a DMA transfer hasn't timed out.  This should
@@ -296,7 +295,9 @@ static inline void check_3c505_dma(struct net_device *dev)
 	elp_device *adapter = netdev_priv(dev);
 	if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
 		unsigned long flags, f;
-		printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
+		pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name,
+			adapter->current_dma.direction ? "download" : "upload",
+			get_dma_residue(dev->dma));
 		spin_lock_irqsave(&adapter->lock, flags);
 		adapter->dmaing = 0;
 		adapter->busy = 0;
@@ -321,7 +322,7 @@ static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte)
 		if (inb_status(base_addr) & HCRE)
 			return false;
 	}
-	printk(KERN_WARNING "3c505: send_pcb_slow timed out\n");
+	pr_warning("3c505: send_pcb_slow timed out\n");
 	return true;
 }
 
@@ -333,7 +334,7 @@ static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte)
 		if (inb_status(base_addr) & HCRE)
 			return false;
 	}
-	printk(KERN_WARNING "3c505: send_pcb_fast timed out\n");
+	pr_warning("3c505: send_pcb_fast timed out\n");
 	return true;
 }
 
@@ -386,7 +387,7 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
 	/* Avoid contention */
 	if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) {
 		if (elp_debug >= 3) {
-			printk(KERN_DEBUG "%s: send_pcb entered while threaded\n", dev->name);
+			pr_debug("%s: send_pcb entered while threaded\n", dev->name);
 		}
 		return false;
 	}
@@ -424,14 +425,15 @@ static bool send_pcb(struct net_device *dev, pcb_struct * pcb)
 
 		case ASF_PCB_NAK:
 #ifdef ELP_DEBUG
-			printk(KERN_DEBUG "%s: send_pcb got NAK\n", dev->name);
+			pr_debug("%s: send_pcb got NAK\n", dev->name);
 #endif
 			goto abort;
 		}
 	}
 
 	if (elp_debug >= 1)
-		printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
+		pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n",
+			dev->name, inb_status(dev->base_addr));
 	goto abort;
 
       sti_abort:
@@ -481,7 +483,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
 	while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
 	if (time_after_eq(jiffies, timeout)) {
 		TIMEOUT_MSG(__LINE__);
-		printk(KERN_INFO "%s: status %02x\n", dev->name, stat);
+		pr_info("%s: status %02x\n", dev->name, stat);
 		return false;
 	}
 	pcb->length = inb_command(dev->base_addr);
@@ -518,7 +520,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
 	/* safety check total length vs data length */
 	if (total_length != (pcb->length + 2)) {
 		if (elp_debug >= 2)
-			printk(KERN_WARNING "%s: mangled PCB received\n", dev->name);
+			pr_warning("%s: mangled PCB received\n", dev->name);
 		set_hsf(dev, HSF_PCB_NAK);
 		return false;
 	}
@@ -527,7 +529,7 @@ static bool receive_pcb(struct net_device *dev, pcb_struct * pcb)
 		if (test_and_set_bit(0, (void *) &adapter->busy)) {
 			if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
 				set_hsf(dev, HSF_PCB_NAK);
-				printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
+				pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
 				pcb->command = 0;
 				return true;
 			} else {
@@ -552,7 +554,7 @@ static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb)
 	elp_device *adapter = netdev_priv(dev);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
+		pr_debug("%s: restarting receiver\n", dev->name);
 	tx_pcb->command = CMD_RECEIVE_PACKET;
 	tx_pcb->length = sizeof(struct Rcv_pkt);
 	tx_pcb->data.rcv_pkt.buf_seg
@@ -586,7 +588,7 @@ static void receive_packet(struct net_device *dev, int len)
 	skb = dev_alloc_skb(rlen + 2);
 
 	if (!skb) {
-		printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
+		pr_warning("%s: memory squeeze, dropping packet\n", dev->name);
 		target = adapter->dma_buffer;
 		adapter->current_dma.target = NULL;
 		/* FIXME: stats */
@@ -604,7 +606,8 @@ static void receive_packet(struct net_device *dev, int len)
 
 	/* if this happens, we die */
 	if (test_and_set_bit(0, (void *) &adapter->dmaing))
-		printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
+		pr_err("%s: rx blocked, DMA in progress, dir %d\n",
+			dev->name, adapter->current_dma.direction);
 
 	adapter->current_dma.direction = 0;
 	adapter->current_dma.length = rlen;
@@ -623,14 +626,14 @@ static void receive_packet(struct net_device *dev, int len)
 	release_dma_lock(flags);
 
 	if (elp_debug >= 3) {
-		printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name);
+		pr_debug("%s: rx DMA transfer started\n", dev->name);
 	}
 
 	if (adapter->rx_active)
 		adapter->rx_active--;
 
 	if (!adapter->busy)
-		printk(KERN_WARNING "%s: receive_packet called, busy not set.\n", dev->name);
+		pr_warning("%s: receive_packet called, busy not set.\n", dev->name);
 }
 
 /******************************************************
@@ -655,12 +658,13 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 		 * has a DMA transfer finished?
 		 */
 		if (inb_status(dev->base_addr) & DONE) {
-			if (!adapter->dmaing) {
-				printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name);
-			}
-			if (elp_debug >= 3) {
-				printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
-			}
+			if (!adapter->dmaing)
+				pr_warning("%s: phantom DMA completed\n", dev->name);
+
+			if (elp_debug >= 3)
+				pr_debug("%s: %s DMA complete, status %02x\n", dev->name,
+					adapter->current_dma.direction ? "tx" : "rx",
+					inb_status(dev->base_addr));
 
 			outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
 			if (adapter->current_dma.direction) {
@@ -682,7 +686,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
 				adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
 				if (elp_debug >= 2)
-					printk(KERN_DEBUG "%s: receiving backlogged packet (%d)\n", dev->name, t);
+					pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t);
 				receive_packet(dev, t);
 			} else {
 				adapter->busy = 0;
@@ -713,21 +717,23 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 					len = adapter->irx_pcb.data.rcv_resp.pkt_len;
 					dlen = adapter->irx_pcb.data.rcv_resp.buf_len;
 					if (adapter->irx_pcb.data.rcv_resp.timeout != 0) {
-						printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name);
+						pr_err("%s: interrupt - packet not received correctly\n", dev->name);
 					} else {
 						if (elp_debug >= 3) {
-							printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
+							pr_debug("%s: interrupt - packet received of length %i (%i)\n",
+								dev->name, len, dlen);
 						}
 						if (adapter->irx_pcb.command == 0xff) {
 							if (elp_debug >= 2)
-								printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
+								pr_debug("%s: adding packet to backlog (len = %d)\n",
+									dev->name, dlen);
 							adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
 							adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
 						} else {
 							receive_packet(dev, dlen);
 						}
 						if (elp_debug >= 3)
-							printk(KERN_DEBUG "%s: packet received\n", dev->name);
+							pr_debug("%s: packet received\n", dev->name);
 					}
 					break;
 
@@ -737,7 +743,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				case CMD_CONFIGURE_82586_RESPONSE:
 					adapter->got[CMD_CONFIGURE_82586] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name);
+						pr_debug("%s: interrupt - configure response received\n", dev->name);
 					break;
 
 					/*
@@ -746,7 +752,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				case CMD_CONFIGURE_ADAPTER_RESPONSE:
 					adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name,
+						pr_debug("%s: Adapter memory configuration %s.\n", dev->name,
 						       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 					break;
 
@@ -756,7 +762,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				case CMD_LOAD_MULTICAST_RESPONSE:
 					adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name,
+						pr_debug("%s: Multicast address list loading %s.\n", dev->name,
 						       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 					break;
 
@@ -766,7 +772,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 				case CMD_SET_ADDRESS_RESPONSE:
 					adapter->got[CMD_SET_STATION_ADDRESS] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name,
+						pr_debug("%s: Ethernet address setting %s.\n", dev->name,
 						       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
 					break;
 
@@ -783,7 +789,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 					dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
 					adapter->got[CMD_NETWORK_STATISTICS] = 1;
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name);
+						pr_debug("%s: interrupt - statistics response received\n", dev->name);
 					break;
 
 					/*
@@ -791,17 +797,17 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 					 */
 				case CMD_TRANSMIT_PACKET_COMPLETE:
 					if (elp_debug >= 3)
-						printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name);
+						pr_debug("%s: interrupt - packet sent\n", dev->name);
 					if (!netif_running(dev))
 						break;
 					switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
 					case 0xffff:
 						dev->stats.tx_aborted_errors++;
-						printk(KERN_INFO "%s: transmit timed out, network cable problem?\n", dev->name);
+						pr_info("%s: transmit timed out, network cable problem?\n", dev->name);
 						break;
 					case 0xfffe:
 						dev->stats.tx_fifo_errors++;
-						printk(KERN_INFO "%s: transmit timed out, FIFO underrun\n", dev->name);
+						pr_info("%s: transmit timed out, FIFO underrun\n", dev->name);
 						break;
 					}
 					netif_wake_queue(dev);
@@ -811,11 +817,12 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id)
 					 * some unknown PCB
 					 */
 				default:
-					printk(KERN_DEBUG "%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command);
+					pr_debug("%s: unknown PCB received - %2.2x\n",
+						dev->name, adapter->irx_pcb.command);
 					break;
 				}
 			} else {
-				printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name);
+				pr_warning("%s: failed to read PCB on interrupt\n", dev->name);
 				adapter_reset(dev);
 			}
 		}
@@ -844,13 +851,13 @@ static int elp_open(struct net_device *dev)
 	int retval;
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request to open device\n", dev->name);
+		pr_debug("%s: request to open device\n", dev->name);
 
 	/*
 	 * make sure we actually found the device
 	 */
 	if (adapter == NULL) {
-		printk(KERN_ERR "%s: Opening a non-existent physical device\n", dev->name);
+		pr_err("%s: Opening a non-existent physical device\n", dev->name);
 		return -EAGAIN;
 	}
 	/*
@@ -880,17 +887,17 @@ static int elp_open(struct net_device *dev)
 	 * install our interrupt service routine
 	 */
 	if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) {
-		printk(KERN_ERR "%s: could not allocate IRQ%d\n", dev->name, dev->irq);
+		pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq);
 		return retval;
 	}
 	if ((retval = request_dma(dev->dma, dev->name))) {
 		free_irq(dev->irq, dev);
-		printk(KERN_ERR "%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
+		pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
 		return retval;
 	}
 	adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE);
 	if (!adapter->dma_buffer) {
-		printk(KERN_ERR "%s: could not allocate DMA buffer\n", dev->name);
+		pr_err("%s: could not allocate DMA buffer\n", dev->name);
 		free_dma(dev->dma);
 		free_irq(dev->irq, dev);
 		return -ENOMEM;
@@ -906,7 +913,7 @@ static int elp_open(struct net_device *dev)
 	 * configure adapter memory: we need 10 multicast addresses, default==0
 	 */
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: sending 3c505 memory configuration command\n", dev->name);
+		pr_debug("%s: sending 3c505 memory configuration command\n", dev->name);
 	adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
 	adapter->tx_pcb.data.memconf.cmd_q = 10;
 	adapter->tx_pcb.data.memconf.rcv_q = 20;
@@ -917,7 +924,7 @@ static int elp_open(struct net_device *dev)
 	adapter->tx_pcb.length = sizeof(struct Memconf);
 	adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
 	if (!send_pcb(dev, &adapter->tx_pcb))
-		printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name);
+		pr_err("%s: couldn't send memory configuration command\n", dev->name);
 	else {
 		unsigned long timeout = jiffies + TIMEOUT;
 		while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
@@ -930,13 +937,13 @@ static int elp_open(struct net_device *dev)
 	 * configure adapter to receive broadcast messages and wait for response
 	 */
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
+		pr_debug("%s: sending 82586 configure command\n", dev->name);
 	adapter->tx_pcb.command = CMD_CONFIGURE_82586;
 	adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
 	adapter->tx_pcb.length = 2;
 	adapter->got[CMD_CONFIGURE_82586] = 0;
 	if (!send_pcb(dev, &adapter->tx_pcb))
-		printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
+		pr_err("%s: couldn't send 82586 configure command\n", dev->name);
 	else {
 		unsigned long timeout = jiffies + TIMEOUT;
 		while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
@@ -952,7 +959,7 @@ static int elp_open(struct net_device *dev)
 	 */
 	prime_rx(dev);
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
+		pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
 
 	/*
 	 * device is now officially open!
@@ -982,7 +989,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
 
 	if (test_and_set_bit(0, (void *) &adapter->busy)) {
 		if (elp_debug >= 2)
-			printk(KERN_DEBUG "%s: transmit blocked\n", dev->name);
+			pr_debug("%s: transmit blocked\n", dev->name);
 		return false;
 	}
 
@@ -1004,7 +1011,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
 	}
 	/* if this happens, we die */
 	if (test_and_set_bit(0, (void *) &adapter->dmaing))
-		printk(KERN_DEBUG "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
+		pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
 
 	adapter->current_dma.direction = 1;
 	adapter->current_dma.start_time = jiffies;
@@ -1030,7 +1037,7 @@ static bool send_packet(struct net_device *dev, struct sk_buff *skb)
 	release_dma_lock(flags);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
+		pr_debug("%s: DMA transfer started\n", dev->name);
 
 	return true;
 }
@@ -1044,9 +1051,10 @@ static void elp_timeout(struct net_device *dev)
 	int stat;
 
 	stat = inb_status(dev->base_addr);
-	printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command");
+	pr_warning("%s: transmit timed out, lost %s?\n", dev->name,
+		   (stat & ACRF) ? "interrupt" : "command");
 	if (elp_debug >= 1)
-		printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat);
+		pr_debug("%s: status %#02x\n", dev->name, stat);
 	dev->trans_start = jiffies;
 	dev->stats.tx_dropped++;
 	netif_wake_queue(dev);
@@ -1068,7 +1076,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	check_3c505_dma(dev);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
+		pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len);
 
 	netif_stop_queue(dev);
 
@@ -1077,13 +1085,13 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	if (!send_packet(dev, skb)) {
 		if (elp_debug >= 2) {
-			printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name);
+			pr_debug("%s: failed to transmit packet\n", dev->name);
 		}
 		spin_unlock_irqrestore(&adapter->lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len);
+		pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len);
 
 	/*
 	 * start the transmit timeout
@@ -1107,7 +1115,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
 	elp_device *adapter = netdev_priv(dev);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request for stats\n", dev->name);
+		pr_debug("%s: request for stats\n", dev->name);
 
 	/* If the device is closed, just return the latest stats we have,
 	   - we cannot ask from the adapter without interrupts */
@@ -1119,7 +1127,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
 	adapter->tx_pcb.length = 0;
 	adapter->got[CMD_NETWORK_STATISTICS] = 0;
 	if (!send_pcb(dev, &adapter->tx_pcb))
-		printk(KERN_ERR "%s: couldn't send get statistics command\n", dev->name);
+		pr_err("%s: couldn't send get statistics command\n", dev->name);
 	else {
 		unsigned long timeout = jiffies + TIMEOUT;
 		while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
@@ -1169,7 +1177,7 @@ static int elp_close(struct net_device *dev)
 	elp_device *adapter = netdev_priv(dev);
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request to close device\n", dev->name);
+		pr_debug("%s: request to close device\n", dev->name);
 
 	netif_stop_queue(dev);
 
@@ -1213,7 +1221,7 @@ static void elp_set_mc_list(struct net_device *dev)
 	unsigned long flags;
 
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
+		pr_debug("%s: request to set multicast list\n", dev->name);
 
 	spin_lock_irqsave(&adapter->lock, flags);
 
@@ -1228,7 +1236,7 @@ static void elp_set_mc_list(struct net_device *dev)
 		}
 		adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
 		if (!send_pcb(dev, &adapter->tx_pcb))
-			printk(KERN_ERR "%s: couldn't send set_multicast command\n", dev->name);
+			pr_err("%s: couldn't send set_multicast command\n", dev->name);
 		else {
 			unsigned long timeout = jiffies + TIMEOUT;
 			while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
@@ -1247,14 +1255,14 @@ static void elp_set_mc_list(struct net_device *dev)
 	 * and wait for response
 	 */
 	if (elp_debug >= 3)
-		printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
+		pr_debug("%s: sending 82586 configure command\n", dev->name);
 	adapter->tx_pcb.command = CMD_CONFIGURE_82586;
 	adapter->tx_pcb.length = 2;
 	adapter->got[CMD_CONFIGURE_82586] = 0;
 	if (!send_pcb(dev, &adapter->tx_pcb))
 	{
 		spin_unlock_irqrestore(&adapter->lock, flags);
-		printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
+		pr_err("%s: couldn't send 82586 configure command\n", dev->name);
 	}
 	else {
 		unsigned long timeout = jiffies + TIMEOUT;
@@ -1283,17 +1291,17 @@ static int __init elp_sense(struct net_device *dev)
 	orig_HSR = inb_status(addr);
 
 	if (elp_debug > 0)
-		printk(search_msg, name, addr);
+		pr_debug(search_msg, name, addr);
 
 	if (orig_HSR == 0xff) {
 		if (elp_debug > 0)
-			printk(notfound_msg, 1);
+			pr_cont(notfound_msg, 1);
 		goto out;
 	}
 
 	/* Wait for a while; the adapter may still be booting up */
 	if (elp_debug > 0)
-		printk(stilllooking_msg);
+		pr_cont(stilllooking_msg);
 
 	if (orig_HSR & DIR) {
 		/* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
@@ -1301,7 +1309,7 @@ static int __init elp_sense(struct net_device *dev)
 		msleep(300);
 		if (inb_status(addr) & DIR) {
 			if (elp_debug > 0)
-				printk(notfound_msg, 2);
+				pr_cont(notfound_msg, 2);
 			goto out;
 		}
 	} else {
@@ -1310,7 +1318,7 @@ static int __init elp_sense(struct net_device *dev)
 		msleep(300);
 		if (!(inb_status(addr) & DIR)) {
 			if (elp_debug > 0)
-				printk(notfound_msg, 3);
+				pr_cont(notfound_msg, 3);
 			goto out;
 		}
 	}
@@ -1318,7 +1326,7 @@ static int __init elp_sense(struct net_device *dev)
 	 * It certainly looks like a 3c505.
 	 */
 	if (elp_debug > 0)
-		printk(found_msg);
+		pr_cont(found_msg);
 
 	return 0;
 out:
@@ -1349,7 +1357,7 @@ static int __init elp_autodetect(struct net_device *dev)
 
 	/* could not find an adapter */
 	if (elp_debug > 0)
-		printk(couldnot_msg, dev->name);
+		pr_debug(couldnot_msg, dev->name);
 
 	return 0;		/* Because of this, the layer above will return -ENODEV */
 }
@@ -1424,16 +1432,16 @@ static int __init elplus_setup(struct net_device *dev)
 			/* Nope, it's ignoring the command register.  This means that
 			 * either it's still booting up, or it's died.
 			 */
-			printk(KERN_ERR "%s: command register wouldn't drain, ", dev->name);
+			pr_err("%s: command register wouldn't drain, ", dev->name);
 			if ((inb_status(dev->base_addr) & 7) == 3) {
 				/* If the adapter status is 3, it *could* still be booting.
 				 * Give it the benefit of the doubt for 10 seconds.
 				 */
-				printk("assuming 3c505 still starting\n");
+				pr_cont("assuming 3c505 still starting\n");
 				timeout = jiffies + 10*HZ;
 				while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
 				if (inb_status(dev->base_addr) & 7) {
-					printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name);
+					pr_err("%s: 3c505 failed to start\n", dev->name);
 				} else {
 					okay = 1;  /* It started */
 				}
@@ -1441,7 +1449,7 @@ static int __init elplus_setup(struct net_device *dev)
 				/* Otherwise, it must just be in a strange
 				 * state.  We probably need to kick it.
 				 */
-				printk("3c505 is sulking\n");
+				pr_cont("3c505 is sulking\n");
 			}
 		}
 		for (tries = 0; tries < 5 && okay; tries++) {
@@ -1454,18 +1462,19 @@ static int __init elplus_setup(struct net_device *dev)
 			adapter->tx_pcb.length = 0;
 			cookie = probe_irq_on();
 			if (!send_pcb(dev, &adapter->tx_pcb)) {
-				printk(KERN_ERR "%s: could not send first PCB\n", dev->name);
+				pr_err("%s: could not send first PCB\n", dev->name);
 				probe_irq_off(cookie);
 				continue;
 			}
 			if (!receive_pcb(dev, &adapter->rx_pcb)) {
-				printk(KERN_ERR "%s: could not read first PCB\n", dev->name);
+				pr_err("%s: could not read first PCB\n", dev->name);
 				probe_irq_off(cookie);
 				continue;
 			}
 			if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
 			    (adapter->rx_pcb.length != 6)) {
-				printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
+				pr_err("%s: first PCB wrong (%d, %d)\n", dev->name,
+					adapter->rx_pcb.command, adapter->rx_pcb.length);
 				probe_irq_off(cookie);
 				continue;
 			}
@@ -1474,32 +1483,32 @@ static int __init elplus_setup(struct net_device *dev)
 		/* It's broken.  Do a hard reset to re-initialise the board,
 		 * and try again.
 		 */
-		printk(KERN_INFO "%s: resetting adapter\n", dev->name);
+		pr_info("%s: resetting adapter\n", dev->name);
 		outb_control(adapter->hcr_val | FLSH | ATTN, dev);
 		outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
 	}
-	printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name);
+	pr_err("%s: failed to initialise 3c505\n", dev->name);
 	goto out;
 
       okay:
 	if (dev->irq) {		/* Is there a preset IRQ? */
 		int rpt = probe_irq_off(cookie);
 		if (dev->irq != rpt) {
-			printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
+			pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
 		}
 		/* if dev->irq == probe_irq_off(cookie), all is well */
 	} else		       /* No preset IRQ; just use what we can detect */
 		dev->irq = probe_irq_off(cookie);
 	switch (dev->irq) {    /* Legal, sane? */
 	case 0:
-		printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n",
+		pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n",
 		       dev->name);
 		goto out;
 	case 1:
 	case 6:
 	case 8:
 	case 13:
-		printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n",
+		pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n",
 		       dev->name, dev->irq);
 		       goto out;
 	}
@@ -1521,7 +1530,7 @@ static int __init elplus_setup(struct net_device *dev)
 			dev->dma = dev->mem_start & 7;
 		}
 		else {
-			printk(KERN_WARNING "%s: warning, DMA channel not specified, using default\n", dev->name);
+			pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name);
 			dev->dma = ELP_DMA;
 		}
 	}
@@ -1529,11 +1538,8 @@ static int __init elplus_setup(struct net_device *dev)
 	/*
 	 * print remainder of startup message
 	 */
-	printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, "
-	       "addr %pM, ",
-	       dev->name, dev->base_addr, dev->irq, dev->dma,
-	       dev->dev_addr);
-
+	pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ",
+		dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr);
 	/*
 	 * read more information from the adapter
 	 */
@@ -1544,9 +1550,10 @@ static int __init elplus_setup(struct net_device *dev)
 	    !receive_pcb(dev, &adapter->rx_pcb) ||
 	    (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) ||
 	    (adapter->rx_pcb.length != 10)) {
-		printk("not responding to second PCB\n");
+		pr_cont("not responding to second PCB\n");
 	}
-	printk("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
+	pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers,
+		adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
 
 	/*
 	 * reconfigure the adapter memory to better suit our purposes
@@ -1563,10 +1570,10 @@ static int __init elplus_setup(struct net_device *dev)
 	    !receive_pcb(dev, &adapter->rx_pcb) ||
 	    (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
 	    (adapter->rx_pcb.length != 2)) {
-		printk(KERN_ERR "%s: could not configure adapter memory\n", dev->name);
+		pr_err("%s: could not configure adapter memory\n", dev->name);
 	}
 	if (adapter->rx_pcb.data.configure) {
-		printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
+		pr_err("%s: adapter configuration failed\n", dev->name);
 	}
 
 	dev->netdev_ops = &elp_netdev_ops;
@@ -1631,17 +1638,17 @@ int __init init_module(void)
 			dev->dma = dma[this_dev];
 		} else {
 			dev->dma = ELP_DMA;
-			printk(KERN_WARNING "3c505.c: warning, using default DMA channel,\n");
+			pr_warning("3c505.c: warning, using default DMA channel,\n");
 		}
 		if (io[this_dev] == 0) {
 			if (this_dev) {
 				free_netdev(dev);
 				break;
 			}
-			printk(KERN_NOTICE "3c505.c: module autoprobe not recommended, give io=xx.\n");
+			pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n");
 		}
 		if (elplus_setup(dev) != 0) {
-			printk(KERN_WARNING "3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
+			pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
 			free_netdev(dev);
 			break;
 		}
diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c
index fbbaf826def..96b86659381 100644
--- a/drivers/net/3c507.c
+++ b/drivers/net/3c507.c
@@ -364,7 +364,7 @@ static const struct net_device_ops netdev_ops = {
 
 static int __init el16_probe1(struct net_device *dev, int ioaddr)
 {
-	static unsigned char init_ID_done, version_printed;
+	static unsigned char init_ID_done;
 	int i, irq, irqval, retval;
 	struct net_local *lp;
 
@@ -391,10 +391,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 		goto out;
 	}
 
-	if (net_debug  &&  version_printed++ == 0)
-		printk(version);
-
-	printk("%s: 3c507 at %#x,", dev->name, ioaddr);
+	pr_info("%s: 3c507 at %#x,", dev->name, ioaddr);
 
 	/* We should make a few more checks here, like the first three octets of
 	   the S.A. for the manufacturer's code. */
@@ -403,7 +400,8 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 
 	irqval = request_irq(irq, &el16_interrupt, 0, DRV_NAME, dev);
 	if (irqval) {
-		printk(KERN_ERR "3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
+		pr_cont("\n");
+		pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
 		retval = -EAGAIN;
 		goto out;
 	}
@@ -414,7 +412,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 	outb(0x01, ioaddr + MISC_CTRL);
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = inb(ioaddr + i);
-	printk(" %pM", dev->dev_addr);
+	pr_cont(" %pM", dev->dev_addr);
 
 	if (mem_start)
 		net_debug = mem_start & 7;
@@ -443,18 +441,18 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 	dev->if_port = (inb(ioaddr + ROM_CONFIG) & 0x80) ? 1 : 0;
 	dev->irq = inb(ioaddr + IRQ_CONFIG) & 0x0f;
 
-	printk(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
+	pr_cont(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
 		   dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end-1);
 
 	if (net_debug)
-		printk(version);
+		pr_debug("%s", version);
 
 	lp = netdev_priv(dev);
  	memset(lp, 0, sizeof(*lp));
 	spin_lock_init(&lp->lock);
 	lp->base = ioremap(dev->mem_start, RX_BUF_END);
 	if (!lp->base) {
-		printk(KERN_ERR "3c507: unable to remap memory\n");
+		pr_err("3c507: unable to remap memory\n");
 		retval = -EAGAIN;
 		goto out1;
 	}
@@ -488,20 +486,20 @@ static void el16_tx_timeout (struct net_device *dev)
 	void __iomem *shmem = lp->base;
 
 	if (net_debug > 1)
-		printk ("%s: transmit timed out, %s?  ", dev->name,
+		pr_debug("%s: transmit timed out, %s?  ", dev->name,
 			readw(shmem + iSCB_STATUS) & 0x8000 ? "IRQ conflict" :
 			"network cable problem");
 	/* Try to restart the adaptor. */
 	if (lp->last_restart == dev->stats.tx_packets) {
 		if (net_debug > 1)
-			printk ("Resetting board.\n");
+			pr_cont("Resetting board.\n");
 		/* Completely reset the adaptor. */
 		init_82586_mem (dev);
 		lp->tx_pkts_in_ring = 0;
 	} else {
 		/* Issue the channel attention signal and hope it "gets better". */
 		if (net_debug > 1)
-			printk ("Kicking board.\n");
+			pr_cont("Kicking board.\n");
 		writew(0xf000 | CUC_START | RX_START, shmem + iSCB_CMD);
 		outb (0, ioaddr + SIGNAL_CA);	/* Issue channel-attn. */
 		lp->last_restart = dev->stats.tx_packets;
@@ -553,7 +551,8 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 	void __iomem *shmem;
 
 	if (dev == NULL) {
-		printk ("net_interrupt(): irq %d for unknown device.\n", irq);
+		pr_err("%s: net_interrupt(): irq %d for unknown device.\n",
+			dev->name, irq);
 		return IRQ_NONE;
 	}
 
@@ -566,7 +565,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 	status = readw(shmem+iSCB_STATUS);
 
 	if (net_debug > 4) {
-		printk("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
+		pr_debug("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
 	}
 
 	/* Disable the 82586's input to the interrupt line. */
@@ -577,7 +576,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 	  unsigned short tx_status = readw(shmem+lp->tx_reap);
 	  if (!(tx_status & 0x8000)) {
 		if (net_debug > 5)
-			printk("Tx command incomplete (%#x).\n", lp->tx_reap);
+			pr_debug("Tx command incomplete (%#x).\n", lp->tx_reap);
 		break;
 	  }
 	  /* Tx unsuccessful or some interesting status bit set. */
@@ -591,7 +590,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 	  }
 	  dev->stats.tx_packets++;
 	  if (net_debug > 5)
-		  printk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
+		  pr_debug("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
 	  lp->tx_reap += TX_BUF_SIZE;
 	  if (lp->tx_reap > RX_BUF_START - TX_BUF_SIZE)
 		lp->tx_reap = TX_BUF_START;
@@ -606,7 +605,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 
 	if (status & 0x4000) { /* Packet received. */
 		if (net_debug > 5)
-			printk("Received packet, rx_head %04x.\n", lp->rx_head);
+			pr_debug("Received packet, rx_head %04x.\n", lp->rx_head);
 		el16_rx(dev);
 	}
 
@@ -615,7 +614,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 
 	if ((status & 0x0700) != 0x0200 && netif_running(dev)) {
 		if (net_debug)
-			printk("%s: Command unit stopped, status %04x, restarting.\n",
+			pr_debug("%s: Command unit stopped, status %04x, restarting.\n",
 				   dev->name, status);
 		/* If this ever occurs we should really re-write the idle loop, reset
 		   the Tx list, and do a complete restart of the command unit.
@@ -627,7 +626,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id)
 		/* The Rx unit is not ready, it must be hung.  Restart the receiver by
 		   initializing the rx buffers, and issuing an Rx start command. */
 		if (net_debug)
-			printk("%s: Rx unit stopped, status %04x, restarting.\n",
+			pr_debug("%s: Rx unit stopped, status %04x, restarting.\n",
 				   dev->name, status);
 		init_rx_bufs(dev);
 		writew(RX_BUF_START,shmem+iSCB_RFA);
@@ -753,9 +752,8 @@ static void init_82586_mem(struct net_device *dev)
 		int boguscnt = 50;
 		while (readw(shmem+iSCB_STATUS) == 0)
 			if (--boguscnt == 0) {
-				printk("%s: i82586 initialization timed out with status %04x, "
-					   "cmd %04x.\n", dev->name,
-					   readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
+				pr_warning("%s: i82586 initialization timed out with status %04x, cmd %04x.\n",
+					dev->name, readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
 				break;
 			}
 		/* Issue channel-attn -- the 82586 won't start. */
@@ -765,7 +763,7 @@ static void init_82586_mem(struct net_device *dev)
 	/* Disable loopback and enable interrupts. */
 	outb(0x84, ioaddr + MISC_CTRL);
 	if (net_debug > 4)
-		printk("%s: Initialized 82586, status %04x.\n", dev->name,
+		pr_debug("%s: Initialized 82586, status %04x.\n", dev->name,
 			   readw(shmem+iSCB_STATUS));
 	return;
 }
@@ -810,7 +808,7 @@ static void hardware_send_packet(struct net_device *dev, void *buf, short length
 		lp->tx_head = TX_BUF_START;
 
 	if (net_debug > 4) {
-		printk("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
+		pr_debug("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
 			   dev->name, ioaddr, length, tx_block, lp->tx_head);
 	}
 
@@ -838,7 +836,7 @@ static void el16_rx(struct net_device *dev)
 
 		if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
 			|| (pkt_len & 0xC000) != 0xC000) {
-			printk(KERN_ERR "%s: Rx frame at %#x corrupted, "
+			pr_err("%s: Rx frame at %#x corrupted, "
 			       "status %04x cmd %04x next %04x "
 			       "data-buf @%04x %04x.\n",
 			       dev->name, rx_head, frame_status, rfd_cmd,
@@ -858,8 +856,7 @@ static void el16_rx(struct net_device *dev)
 			pkt_len &= 0x3fff;
 			skb = dev_alloc_skb(pkt_len+2);
 			if (skb == NULL) {
-				printk(KERN_ERR "%s: Memory squeeze, "
-				       "dropping packet.\n",
+				pr_err("%s: Memory squeeze, dropping packet.\n",
 				       dev->name);
 				dev->stats.rx_dropped++;
 				break;
@@ -926,7 +923,7 @@ MODULE_PARM_DESC(irq, "(ignored)");
 int __init init_module(void)
 {
 	if (io == 0)
-		printk("3c507: You should not use auto-probing with insmod!\n");
+		pr_notice("3c507: You should not use auto-probing with insmod!\n");
 	dev_3c507 = el16_probe(-1);
 	return IS_ERR(dev_3c507) ? PTR_ERR(dev_3c507) : 0;
 }
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 682aad89708..d2137efbd45 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -257,7 +257,7 @@ static int el3_isa_id_sequence(__be16 *phys_addr)
 			    && !memcmp(phys_addr, el3_devs[i]->dev_addr,
 				       ETH_ALEN)) {
 				if (el3_debug > 3)
-					printk(KERN_DEBUG "3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
+					pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
 						phys_addr[0] & 0xff, phys_addr[0] >> 8,
 						phys_addr[1] & 0xff, phys_addr[1] >> 8,
 						phys_addr[2] & 0xff, phys_addr[2] >> 8);
@@ -578,19 +578,18 @@ static int __devinit el3_common_init(struct net_device *dev)
 
 	err = register_netdev(dev);
 	if (err) {
-		printk(KERN_ERR "Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
+		pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
 			dev->base_addr, dev->irq);
 		release_region(dev->base_addr, EL3_IO_EXTENT);
 		return err;
 	}
 
-	printk(KERN_INFO "%s: 3c5x9 found at %#3.3lx, %s port, "
-	       "address %pM, IRQ %d.\n",
+	pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n",
 	       dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)],
 	       dev->dev_addr, dev->irq);
 
 	if (el3_debug > 0)
-		printk(KERN_INFO "%s", version);
+		pr_info("%s", version);
 	return 0;
 
 }
@@ -629,8 +628,8 @@ static int __init el3_mca_probe(struct device *device)
 	irq = pos5 & 0x0f;
 
 
-	printk(KERN_INFO "3c529: found %s at slot %d\n",
-		   el3_mca_adapter_names[mdev->index], slot + 1);
+	pr_info("3c529: found %s at slot %d\n",
+		el3_mca_adapter_names[mdev->index], slot + 1);
 
 	/* claim the slot */
 	strncpy(mdev->name, el3_mca_adapter_names[mdev->index],
@@ -642,7 +641,7 @@ static int __init el3_mca_probe(struct device *device)
 	irq = mca_device_transform_irq(mdev, irq);
 	ioaddr = mca_device_transform_ioport(mdev, ioaddr);
 	if (el3_debug > 2) {
-			printk(KERN_DEBUG "3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);
+		pr_debug("3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);
 	}
 	EL3WINDOW(0);
 	for (i = 0; i < 3; i++)
@@ -657,11 +656,11 @@ static int __init el3_mca_probe(struct device *device)
 	netdev_boot_setup_check(dev);
 
 	el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_MCA);
-	device->driver_data = dev;
+	dev_set_drvdata(device, dev);
 	err = el3_common_init(dev);
 
 	if (err) {
-		device->driver_data = NULL;
+		dev_set_drvdata(device, NULL);
 		free_netdev(dev);
 		return -ENOMEM;
 	}
@@ -725,12 +724,12 @@ static int __init el3_eisa_probe (struct device *device)
 
 /* This remove works for all device types.
  *
- * The net dev must be stored in the driver_data field */
+ * The net dev must be stored in the driver data field */
 static int __devexit el3_device_remove (struct device *device)
 {
 	struct net_device *dev;
 
-	dev  = device->driver_data;
+	dev = dev_get_drvdata(device);
 
 	el3_common_remove (dev);
 	return 0;
@@ -765,7 +764,7 @@ static ushort id_read_eeprom(int index)
 		word = (word << 1) + (inb(id_port) & 0x01);
 
 	if (el3_debug > 3)
-		printk(KERN_DEBUG "  3c509 EEPROM word %d %#4.4x.\n", index, word);
+		pr_debug("  3c509 EEPROM word %d %#4.4x.\n", index, word);
 
 	return word;
 }
@@ -787,13 +786,13 @@ el3_open(struct net_device *dev)
 
 	EL3WINDOW(0);
 	if (el3_debug > 3)
-		printk(KERN_DEBUG "%s: Opening, IRQ %d	 status@%x %4.4x.\n", dev->name,
+		pr_debug("%s: Opening, IRQ %d	 status@%x %4.4x.\n", dev->name,
 			   dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
 
 	el3_up(dev);
 
 	if (el3_debug > 3)
-		printk(KERN_DEBUG "%s: Opened 3c509  IRQ %d  status %4.4x.\n",
+		pr_debug("%s: Opened 3c509  IRQ %d  status %4.4x.\n",
 			   dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
 
 	return 0;
@@ -805,8 +804,7 @@ el3_tx_timeout (struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	/* Transmitter timeout, serious problems. */
-	printk(KERN_WARNING "%s: transmit timed out, Tx_status %2.2x status %4.4x "
-		   "Tx FIFO room %d.\n",
+	pr_warning("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d.\n",
 		   dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
 		   inw(ioaddr + TX_FREE));
 	dev->stats.tx_errors++;
@@ -830,7 +828,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->stats.tx_bytes += skb->len;
 
 	if (el3_debug > 4) {
-		printk(KERN_DEBUG "%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
+		pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
 			   dev->name, skb->len, inw(ioaddr + EL3_STATUS));
 	}
 #if 0
@@ -839,7 +837,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		ushort status = inw(ioaddr + EL3_STATUS);
 		if (status & 0x0001 		/* IRQ line active, missed one. */
 			&& inw(ioaddr + EL3_STATUS) & 1) { 			/* Make sure. */
-			printk(KERN_DEBUG "%s: Missed interrupt, status then %04x now %04x"
+			pr_debug("%s: Missed interrupt, status then %04x now %04x"
 				   "  Tx %2.2x Rx %4.4x.\n", dev->name, status,
 				   inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
 				   inw(ioaddr + RX_STATUS));
@@ -913,7 +911,7 @@ el3_interrupt(int irq, void *dev_id)
 
 	if (el3_debug > 4) {
 		status = inw(ioaddr + EL3_STATUS);
-		printk(KERN_DEBUG "%s: interrupt, status %4.4x.\n", dev->name, status);
+		pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status);
 	}
 
 	while ((status = inw(ioaddr + EL3_STATUS)) &
@@ -924,7 +922,7 @@ el3_interrupt(int irq, void *dev_id)
 
 		if (status & TxAvailable) {
 			if (el3_debug > 5)
-				printk(KERN_DEBUG "	TX room bit was handled.\n");
+				pr_debug("	TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
 			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue (dev);
@@ -962,7 +960,7 @@ el3_interrupt(int irq, void *dev_id)
 		}
 
 		if (--i < 0) {
-			printk(KERN_ERR "%s: Infinite loop in interrupt, status %4.4x.\n",
+			pr_err("%s: Infinite loop in interrupt, status %4.4x.\n",
 				   dev->name, status);
 			/* Clear all interrupts. */
 			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
@@ -973,7 +971,7 @@ el3_interrupt(int irq, void *dev_id)
 	}
 
 	if (el3_debug > 4) {
-		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name,
+		pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name,
 			   inw(ioaddr + EL3_STATUS));
 	}
 	spin_unlock(&lp->lock);
@@ -1021,7 +1019,7 @@ static void update_stats(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el3_debug > 5)
-		printk("   Updating the statistics.\n");
+		pr_debug("   Updating the statistics.\n");
 	/* Turn off statistics updates while reading. */
 	outw(StatsDisable, ioaddr + EL3_CMD);
 	/* Switch to the stats window, and read everything. */
@@ -1051,7 +1049,7 @@ el3_rx(struct net_device *dev)
 	short rx_status;
 
 	if (el3_debug > 5)
-		printk("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+		pr_debug("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
 			   inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
 	while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {
 		if (rx_status & 0x4000) { /* Error, update stats. */
@@ -1073,7 +1071,7 @@ el3_rx(struct net_device *dev)
 
 			skb = dev_alloc_skb(pkt_len+5);
 			if (el3_debug > 4)
-				printk("Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 					   pkt_len, rx_status);
 			if (skb != NULL) {
 				skb_reserve(skb, 2);     /* Align IP on 16 byte */
@@ -1092,12 +1090,12 @@ el3_rx(struct net_device *dev)
 			outw(RxDiscard, ioaddr + EL3_CMD);
 			dev->stats.rx_dropped++;
 			if (el3_debug)
-				printk("%s: Couldn't allocate a sk_buff of size %d.\n",
+				pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n",
 					   dev->name, pkt_len);
 		}
 		inw(ioaddr + EL3_STATUS); 				/* Delay. */
 		while (inw(ioaddr + EL3_STATUS) & 0x1000)
-			printk(KERN_DEBUG "	Waiting for 3c509 to discard packet, status %x.\n",
+			pr_debug("	Waiting for 3c509 to discard packet, status %x.\n",
 				   inw(ioaddr + EL3_STATUS) );
 	}
 
@@ -1118,7 +1116,7 @@ set_multicast_list(struct net_device *dev)
 		static int old;
 		if (old != dev->mc_count) {
 			old = dev->mc_count;
-			printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
+			pr_debug("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
 		}
 	}
 	spin_lock_irqsave(&lp->lock, flags);
@@ -1141,7 +1139,7 @@ el3_close(struct net_device *dev)
 	struct el3_private *lp = netdev_priv(dev);
 
 	if (el3_debug > 2)
-		printk("%s: Shutting down ethercard.\n", dev->name);
+		pr_debug("%s: Shutting down ethercard.\n", dev->name);
 
 	el3_down(dev);
 
@@ -1388,30 +1386,30 @@ el3_up(struct net_device *dev)
 		EL3WINDOW(4);
 		net_diag = inw(ioaddr + WN4_NETDIAG);
 		net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */
-		printk("%s: ", dev->name);
+		pr_info("%s: ", dev->name);
 		switch (dev->if_port & 0x0c) {
 			case 12:
 				/* force full-duplex mode if 3c5x9b */
 				if (sw_info & 0x000f) {
-					printk("Forcing 3c5x9b full-duplex mode");
+					pr_cont("Forcing 3c5x9b full-duplex mode");
 					break;
 				}
 			case 8:
 				/* set full-duplex mode based on eeprom config setting */
 				if ((sw_info & 0x000f) && (sw_info & 0x8000)) {
-					printk("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
+					pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
 					break;
 				}
 			default:
 				/* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */
-				printk("Setting 3c5x9/3c5x9B half-duplex mode");
+				pr_cont("Setting 3c5x9/3c5x9B half-duplex mode");
 				net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */
 		}
 
 		outw(net_diag, ioaddr + WN4_NETDIAG);
-		printk(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
+		pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
 		if (el3_debug > 3)
-			printk("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
+			pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
 		/* Enable link beat and jabber check. */
 		outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);
 	}
@@ -1455,7 +1453,7 @@ el3_suspend(struct device *pdev, pm_message_t state)
 	struct el3_private *lp;
 	int ioaddr;
 
-	dev = pdev->driver_data;
+	dev = dev_get_drvdata(pdev);
 	lp = netdev_priv(dev);
 	ioaddr = dev->base_addr;
 
@@ -1479,7 +1477,7 @@ el3_resume(struct device *pdev)
 	struct el3_private *lp;
 	int ioaddr;
 
-	dev = pdev->driver_data;
+	dev = dev_get_drvdata(pdev);
 	lp = netdev_priv(dev);
 	ioaddr = dev->base_addr;
 
@@ -1539,7 +1537,7 @@ static int __init el3_init_module(void)
 	}
 	if (id_port >= 0x200) {
 		id_port = 0;
-		printk(KERN_ERR "No I/O port available for 3c509 activation.\n");
+		pr_err("No I/O port available for 3c509 activation.\n");
 	} else {
 		ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS);
 		if (!ret)
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 167bf23066e..3e00fa8ea65 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -420,7 +420,7 @@ int init_module(void)
 	if (debug >= 0)
 		corkscrew_debug = debug;
 	if (corkscrew_debug)
-		printk(version);
+		pr_debug("%s", version);
 	while (corkscrew_scan(-1))
 		found++;
 	return found ? 0 : -ENODEV;
@@ -437,7 +437,7 @@ struct net_device *tc515_probe(int unit)
 
 	if (corkscrew_debug > 0 && !printed) {
 		printed = 1;
-		printk(version);
+		pr_debug("%s", version);
 	}
 
 	return dev;
@@ -516,7 +516,7 @@ static struct net_device *corkscrew_scan(int unit)
 			if (pnp_device_attach(idev) < 0)
 				continue;
 			if (pnp_activate_dev(idev) < 0) {
-				printk("pnp activate failed (out of resources?)\n");
+				pr_warning("pnp activate failed (out of resources?)\n");
 				pnp_device_detach(idev);
 				continue;
 			}
@@ -531,9 +531,9 @@ static struct net_device *corkscrew_scan(int unit)
 				continue;
 			}
 			if(corkscrew_debug)
-				printk ("ISAPNP reports %s at i/o 0x%x, irq %d\n",
+				pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n",
 					(char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq);
-			printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+			pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
 		     		inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
 			/* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */
 			SET_NETDEV_DEV(dev, &idev->dev);
@@ -552,7 +552,7 @@ no_pnp:
 		if (!check_device(ioaddr))
 			continue;
 
-		printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+		pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
 		     inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
 		err = corkscrew_setup(dev, ioaddr, NULL, cards_found++);
 		if (!err)
@@ -625,7 +625,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 	list_add(&vp->list, &root_corkscrew_dev);
 #endif
 
-	printk(KERN_INFO "%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
+	pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
 
 	spin_lock_init(&vp->lock);
 
@@ -648,19 +648,19 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 	}
 	checksum = (checksum ^ (checksum >> 8)) & 0xff;
 	if (checksum != 0x00)
-		printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
-	printk(" %pM", dev->dev_addr);
+		pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+	pr_cont(" %pM", dev->dev_addr);
 	if (eeprom[16] == 0x11c7) {	/* Corkscrew */
 		if (request_dma(dev->dma, "3c515")) {
-			printk(", DMA %d allocation failed", dev->dma);
+			pr_cont(", DMA %d allocation failed", dev->dma);
 			dev->dma = 0;
 		} else
-			printk(", DMA %d", dev->dma);
+			pr_cont(", DMA %d", dev->dma);
 	}
-	printk(", IRQ %d\n", dev->irq);
+	pr_cont(", IRQ %d\n", dev->irq);
 	/* Tell them about an invalid IRQ. */
 	if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
-		printk(KERN_WARNING " *** Warning: this IRQ is unlikely to work! ***\n");
+		pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n");
 
 	{
 		char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
@@ -669,9 +669,9 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 		vp->available_media = inw(ioaddr + Wn3_Options);
 		config = inl(ioaddr + Wn3_Config);
 		if (corkscrew_debug > 1)
-			printk(KERN_INFO "  Internal config register is %4.4x, transceivers %#x.\n",
+			pr_info("  Internal config register is %4.4x, transceivers %#x.\n",
 				config, inw(ioaddr + Wn3_Options));
-		printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+		pr_info("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
 			8 << config & Ram_size,
 			config & Ram_width ? "word" : "byte",
 			ram_split[(config & Ram_split) >> Ram_split_shift],
@@ -682,7 +682,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 		dev->if_port = vp->default_media;
 	}
 	if (vp->media_override != 7) {
-		printk(KERN_INFO "  Media override to transceiver type %d (%s).\n",
+		pr_info("  Media override to transceiver type %d (%s).\n",
 		       vp->media_override,
 		       media_tbl[vp->media_override].name);
 		dev->if_port = vp->media_override;
@@ -718,7 +718,7 @@ static int corkscrew_open(struct net_device *dev)
 
 	if (vp->media_override != 7) {
 		if (corkscrew_debug > 1)
-			printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+			pr_info("%s: Media override to transceiver %d (%s).\n",
 				dev->name, vp->media_override,
 				media_tbl[vp->media_override].name);
 		dev->if_port = vp->media_override;
@@ -729,7 +729,7 @@ static int corkscrew_open(struct net_device *dev)
 			dev->if_port = media_tbl[dev->if_port].next;
 
 		if (corkscrew_debug > 1)
-			printk("%s: Initial media type %s.\n",
+			pr_debug("%s: Initial media type %s.\n",
 			       dev->name, media_tbl[dev->if_port].name);
 
 		init_timer(&vp->timer);
@@ -744,7 +744,7 @@ static int corkscrew_open(struct net_device *dev)
 	outl(config, ioaddr + Wn3_Config);
 
 	if (corkscrew_debug > 1) {
-		printk("%s: corkscrew_open() InternalConfig %8.8x.\n",
+		pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n",
 		       dev->name, config);
 	}
 
@@ -777,7 +777,7 @@ static int corkscrew_open(struct net_device *dev)
 
 	if (corkscrew_debug > 1) {
 		EL3WINDOW(4);
-		printk("%s: corkscrew_open() irq %d media status %4.4x.\n",
+		pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n",
 		       dev->name, dev->irq, inw(ioaddr + Wn4_Media));
 	}
 
@@ -814,8 +814,7 @@ static int corkscrew_open(struct net_device *dev)
 	if (vp->full_bus_master_rx) {	/* Boomerang bus master. */
 		vp->cur_rx = vp->dirty_rx = 0;
 		if (corkscrew_debug > 2)
-			printk("%s:  Filling in the Rx ring.\n",
-			       dev->name);
+			pr_debug("%s:  Filling in the Rx ring.\n", dev->name);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			struct sk_buff *skb;
 			if (i < (RX_RING_SIZE - 1))
@@ -877,7 +876,7 @@ static void corkscrew_timer(unsigned long data)
 	int ok = 0;
 
 	if (corkscrew_debug > 1)
-		printk("%s: Media selection timer tick happened, %s.\n",
+		pr_debug("%s: Media selection timer tick happened, %s.\n",
 		       dev->name, media_tbl[dev->if_port].name);
 
 	spin_lock_irqsave(&vp->lock, flags);
@@ -894,12 +893,12 @@ static void corkscrew_timer(unsigned long data)
 			if (media_status & Media_LnkBeat) {
 				ok = 1;
 				if (corkscrew_debug > 1)
-					printk("%s: Media %s has link beat, %x.\n",
+					pr_debug("%s: Media %s has link beat, %x.\n",
 						dev->name,
 						media_tbl[dev->if_port].name,
 						media_status);
 			} else if (corkscrew_debug > 1)
-				printk("%s: Media %s is has no link beat, %x.\n",
+				pr_debug("%s: Media %s is has no link beat, %x.\n",
 					dev->name,
 					media_tbl[dev->if_port].name,
 					media_status);
@@ -907,7 +906,7 @@ static void corkscrew_timer(unsigned long data)
 			break;
 		default:	/* Other media types handled by Tx timeouts. */
 			if (corkscrew_debug > 1)
-				printk("%s: Media %s is has no indication, %x.\n",
+				pr_debug("%s: Media %s is has no indication, %x.\n",
 					dev->name,
 					media_tbl[dev->if_port].name,
 					media_status);
@@ -925,12 +924,12 @@ static void corkscrew_timer(unsigned long data)
 			if (dev->if_port == 8) {	/* Go back to default. */
 				dev->if_port = vp->default_media;
 				if (corkscrew_debug > 1)
-					printk("%s: Media selection failing, using default %s port.\n",
+					pr_debug("%s: Media selection failing, using default %s port.\n",
 						dev->name,
 						media_tbl[dev->if_port].name);
 			} else {
 				if (corkscrew_debug > 1)
-					printk("%s: Media selection failed, now trying %s port.\n",
+					pr_debug("%s: Media selection failed, now trying %s port.\n",
 						dev->name,
 						media_tbl[dev->if_port].name);
 				vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
@@ -953,7 +952,7 @@ static void corkscrew_timer(unsigned long data)
 
 	spin_unlock_irqrestore(&vp->lock, flags);
 	if (corkscrew_debug > 1)
-		printk("%s: Media selection timer finished, %s.\n",
+		pr_debug("%s: Media selection timer finished, %s.\n",
 		       dev->name, media_tbl[dev->if_port].name);
 
 #endif				/* AUTOMEDIA */
@@ -966,23 +965,21 @@ static void corkscrew_timeout(struct net_device *dev)
 	struct corkscrew_private *vp = netdev_priv(dev);
 	int ioaddr = dev->base_addr;
 
-	printk(KERN_WARNING
-	       "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+	pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
 	       dev->name, inb(ioaddr + TxStatus),
 	       inw(ioaddr + EL3_STATUS));
 	/* Slight code bloat to be user friendly. */
 	if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
-		printk(KERN_WARNING
-		       "%s: Transmitter encountered 16 collisions -- network"
+		pr_warning("%s: Transmitter encountered 16 collisions --"
 		       " network cable problem?\n", dev->name);
 #ifndef final_version
-	printk("  Flags; bus-master %d, full %d; dirty %d current %d.\n",
+	pr_debug("  Flags; bus-master %d, full %d; dirty %d current %d.\n",
 	       vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
 	       vp->cur_tx);
-	printk("  Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
+	pr_debug("  Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
 	       &vp->tx_ring[0]);
 	for (i = 0; i < TX_RING_SIZE; i++) {
-		printk("  %d: %p  length %8.8x status %8.8x\n", i,
+		pr_debug("  %d: %p  length %8.8x status %8.8x\n", i,
 		       &vp->tx_ring[i],
 		       vp->tx_ring[i].length, vp->tx_ring[i].status);
 	}
@@ -1017,13 +1014,13 @@ static int corkscrew_start_xmit(struct sk_buff *skb,
 		int i;
 
 		if (vp->tx_full)	/* No room to transmit with */
-			return 1;
+			return NETDEV_TX_BUSY;
 		if (vp->cur_tx != 0)
 			prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE];
 		else
 			prev_entry = NULL;
 		if (corkscrew_debug > 3)
-			printk("%s: Trying to send a packet, Tx index %d.\n",
+			pr_debug("%s: Trying to send a packet, Tx index %d.\n",
 				dev->name, vp->cur_tx);
 		/* vp->tx_full = 1; */
 		vp->tx_skbuff[entry] = skb;
@@ -1102,7 +1099,7 @@ static int corkscrew_start_xmit(struct sk_buff *skb,
 		while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) {
 			if (tx_status & 0x3C) {	/* A Tx-disabling error occurred.  */
 				if (corkscrew_debug > 2)
-					printk("%s: Tx error, status %2.2x.\n",
+					pr_debug("%s: Tx error, status %2.2x.\n",
 						dev->name, tx_status);
 				if (tx_status & 0x04)
 					dev->stats.tx_fifo_errors++;
@@ -1143,7 +1140,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 	status = inw(ioaddr + EL3_STATUS);
 
 	if (corkscrew_debug > 4)
-		printk("%s: interrupt, status %4.4x, timer %d.\n",
+		pr_debug("%s: interrupt, status %4.4x, timer %d.\n",
 			dev->name, status, latency);
 	if ((status & 0xE000) != 0xE000) {
 		static int donedidthis;
@@ -1151,7 +1148,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 		   Ignore a single early interrupt, but don't hang the machine for
 		   other interrupt problems. */
 		if (donedidthis++ > 100) {
-			printk(KERN_ERR "%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
+			pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
 				   dev->name, status, netif_running(dev));
 			free_irq(dev->irq, dev);
 			dev->irq = -1;
@@ -1160,14 +1157,14 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 
 	do {
 		if (corkscrew_debug > 5)
-			printk("%s: In interrupt loop, status %4.4x.\n",
+			pr_debug("%s: In interrupt loop, status %4.4x.\n",
 			       dev->name, status);
 		if (status & RxComplete)
 			corkscrew_rx(dev);
 
 		if (status & TxAvailable) {
 			if (corkscrew_debug > 5)
-				printk("	TX room bit was handled.\n");
+				pr_debug("	TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
 			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue(dev);
@@ -1212,19 +1209,20 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 			if (status & StatsFull) {	/* Empty statistics. */
 				static int DoneDidThat;
 				if (corkscrew_debug > 4)
-					printk("%s: Updating stats.\n", dev->name);
+					pr_debug("%s: Updating stats.\n", dev->name);
 				update_stats(ioaddr, dev);
 				/* DEBUG HACK: Disable statistics as an interrupt source. */
 				/* This occurs when we have the wrong media type! */
 				if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) {
 					int win, reg;
-					printk("%s: Updating stats failed, disabling stats as an"
-					     " interrupt source.\n", dev->name);
+					pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n",
+						dev->name);
 					for (win = 0; win < 8; win++) {
 						EL3WINDOW(win);
-						printk("\n Vortex window %d:", win);
+						pr_notice("Vortex window %d:", win);
 						for (reg = 0; reg < 16; reg++)
-							printk(" %2.2x", inb(ioaddr + reg));
+							pr_cont(" %2.2x", inb(ioaddr + reg));
+						pr_cont("\n");
 					}
 					EL3WINDOW(7);
 					outw(SetIntrEnb | TxAvailable |
@@ -1246,9 +1244,8 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 		}
 
 		if (--i < 0) {
-			printk(KERN_ERR "%s: Too much work in interrupt, status %4.4x.  "
-			     "Disabling functions (%4.4x).\n", dev->name,
-			     status, SetStatusEnb | ((~status) & 0x7FE));
+			pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n",
+				dev->name, status, SetStatusEnb | ((~status) & 0x7FE));
 			/* Disable all pending interrupts. */
 			outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD);
 			outw(AckIntr | 0x7FF, ioaddr + EL3_CMD);
@@ -1262,7 +1259,7 @@ static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
 	spin_unlock(&lp->lock);
 
 	if (corkscrew_debug > 4)
-		printk("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
+		pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
 	return IRQ_HANDLED;
 }
 
@@ -1273,13 +1270,13 @@ static int corkscrew_rx(struct net_device *dev)
 	short rx_status;
 
 	if (corkscrew_debug > 5)
-		printk("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+		pr_debug("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
 		     inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
 	while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
 		if (rx_status & 0x4000) {	/* Error, update stats. */
 			unsigned char rx_error = inb(ioaddr + RxErrors);
 			if (corkscrew_debug > 2)
-				printk(" Rx error: status %2.2x.\n",
+				pr_debug(" Rx error: status %2.2x.\n",
 				       rx_error);
 			dev->stats.rx_errors++;
 			if (rx_error & 0x01)
@@ -1299,7 +1296,7 @@ static int corkscrew_rx(struct net_device *dev)
 
 			skb = dev_alloc_skb(pkt_len + 5 + 2);
 			if (corkscrew_debug > 4)
-				printk("Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 				     pkt_len, rx_status);
 			if (skb != NULL) {
 				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
@@ -1318,7 +1315,7 @@ static int corkscrew_rx(struct net_device *dev)
 						break;
 				continue;
 			} else if (corkscrew_debug)
-				printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
+				pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
 		}
 		outw(RxDiscard, ioaddr + EL3_CMD);
 		dev->stats.rx_dropped++;
@@ -1338,13 +1335,13 @@ static int boomerang_rx(struct net_device *dev)
 	int rx_status;
 
 	if (corkscrew_debug > 5)
-		printk("   In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
+		pr_debug("   In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
 			inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
 	while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) {
 		if (rx_status & RxDError) {	/* Error, update stats. */
 			unsigned char rx_error = rx_status >> 16;
 			if (corkscrew_debug > 2)
-				printk(" Rx error: status %2.2x.\n",
+				pr_debug(" Rx error: status %2.2x.\n",
 				       rx_error);
 			dev->stats.rx_errors++;
 			if (rx_error & 0x01)
@@ -1364,7 +1361,7 @@ static int boomerang_rx(struct net_device *dev)
 
 			dev->stats.rx_bytes += pkt_len;
 			if (corkscrew_debug > 4)
-				printk("Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 				     pkt_len, rx_status);
 
 			/* Check if the packet is long enough to just accept without
@@ -1385,7 +1382,7 @@ static int boomerang_rx(struct net_device *dev)
 				temp = skb_put(skb, pkt_len);
 				/* Remove this checking code for final release. */
 				if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
-					    printk("%s: Warning -- the skbuff addresses do not match"
+					pr_warning("%s: Warning -- the skbuff addresses do not match"
 					     " in boomerang_rx: %p vs. %p / %p.\n",
 					     dev->name,
 					     isa_bus_to_virt(vp->
@@ -1427,12 +1424,11 @@ static int corkscrew_close(struct net_device *dev)
 	netif_stop_queue(dev);
 
 	if (corkscrew_debug > 1) {
-		printk("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
+		pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
 		     dev->name, inw(ioaddr + EL3_STATUS),
 		     inb(ioaddr + TxStatus));
-		printk("%s: corkscrew close stats: rx_nocopy %d rx_copy %d"
-		       " tx_queued %d.\n", dev->name, rx_nocopy, rx_copy,
-		       queued_packet);
+		pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n",
+			dev->name, rx_nocopy, rx_copy, queued_packet);
 	}
 
 	del_timer(&vp->timer);
@@ -1534,7 +1530,7 @@ static void set_rx_mode(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {
 		if (corkscrew_debug > 3)
-			printk("%s: Setting promiscuous mode.\n",
+			pr_debug("%s: Setting promiscuous mode.\n",
 			       dev->name);
 		new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
 	} else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 8f734d74b51..cdd955c4014 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -176,7 +176,7 @@ sizeof(nop_cmd) = 8;
     if(!p->scb->cmd) break; \
     DELAY_16(); \
     if(i == 1023) { \
-      printk(KERN_WARNING "%s:%d: scb_cmd timed out .. resetting i82586\n",\
+      pr_warning("%s:%d: scb_cmd timed out .. resetting i82586\n",\
       	dev->name,__LINE__); \
       elmc_id_reset586(); } } }
 
@@ -291,7 +291,7 @@ static int elmc_open(struct net_device *dev)
 	ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM,
 			  dev->name, dev);
 	if (ret) {
-		printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq);
+		pr_err("%s: couldn't get irq %d\n", dev->name, dev->irq);
 		elmc_id_reset586();
 		return ret;
 	}
@@ -371,9 +371,9 @@ static void alloc586(struct net_device *dev)
 
 	DELAY(2);
 
-	if (p->iscp->busy) {
-		printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name);
-	}
+	if (p->iscp->busy)
+		pr_err("%s: Init-Problems (alloc).\n", dev->name);
+
 	memset((char *) p->scb, 0, sizeof(struct scb_struct));
 }
 
@@ -470,7 +470,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 	mca_set_adapter_procfn(slot, (MCA_ProcFn) elmc_getinfo, dev);
 
 	/* if we get this far, adapter has been found - carry on */
-	printk(KERN_INFO "%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1);
+	pr_info("%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1);
 
 	/* Now we extract configuration info from the card.
 	   The 3c523 provides information in two of the POS registers, but
@@ -507,7 +507,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 	memset(pr, 0, sizeof(struct priv));
 	pr->slot = slot;
 
-	printk(KERN_INFO "%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision,
+	pr_info("%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision,
 	       dev->base_addr);
 
 	/* Determine if we're using the on-board transceiver (i.e. coax) or
@@ -529,7 +529,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 
 	size = 0x4000;		/* check for 16K mem */
 	if (!check586(dev, dev->mem_start, size)) {
-		printk(KERN_ERR "%s: memprobe, Can't find memory at 0x%lx!\n", dev->name,
+		pr_err("%s: memprobe, Can't find memory at 0x%lx!\n", dev->name,
 		       dev->mem_start);
 		retval = -ENODEV;
 		goto err_out;
@@ -546,7 +546,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 	pr->num_recv_buffs = NUM_RECV_BUFFS_16;
 
 	/* dump all the assorted information */
-	printk(KERN_INFO "%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
+	pr_info("%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
 	       dev->irq, dev->if_port ? "ex" : "in",
 	       dev->mem_start, dev->mem_end - 1);
 
@@ -555,7 +555,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = inb(dev->base_addr + i);
 
-	printk(KERN_INFO "%s: hardware address %pM\n",
+	pr_info("%s: hardware address %pM\n",
 	       dev->name, dev->dev_addr);
 
 	dev->netdev_ops = &netdev_ops;
@@ -660,7 +660,7 @@ static int init586(struct net_device *dev)
 	}
 
 	if ((cfg_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_COMPL | STAT_OK)) {
-		printk(KERN_WARNING "%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status);
+		pr_warning("%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status);
 		return 1;
 	}
 	/*
@@ -686,7 +686,8 @@ static int init586(struct net_device *dev)
 	}
 
 	if ((ias_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_OK | STAT_COMPL)) {
-		printk(KERN_WARNING "%s (elmc): individual address setup command failed: %04x\n", dev->name, ias_cmd->cmd_status);
+		pr_warning("%s (elmc): individual address setup command failed: %04x\n",
+			dev->name, ias_cmd->cmd_status);
 		return 1;
 	}
 	/*
@@ -707,7 +708,7 @@ static int init586(struct net_device *dev)
 	s = jiffies;
 	while (!(tdr_cmd->cmd_status & STAT_COMPL)) {
 		if (time_after(jiffies, s + 30*HZ/100)) {
-			printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
+			pr_warning("%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
 			result = 1;
 			break;
 		}
@@ -723,14 +724,14 @@ static int init586(struct net_device *dev)
 		if (result & TDR_LNK_OK) {
 			/* empty */
 		} else if (result & TDR_XCVR_PRB) {
-			printk(KERN_WARNING "%s: TDR: Transceiver problem!\n", dev->name);
+			pr_warning("%s: TDR: Transceiver problem!\n", dev->name);
 		} else if (result & TDR_ET_OPN) {
-			printk(KERN_WARNING "%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
+			pr_warning("%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
 		} else if (result & TDR_ET_SRT) {
 			if (result & TDR_TIMEMASK)	/* time == 0 -> strange :-) */
-				printk(KERN_WARNING "%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
+				pr_warning("%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
 		} else {
-			printk(KERN_WARNING "%s: TDR: Unknown status %04x\n", dev->name, result);
+			pr_warning("%s: TDR: Unknown status %04x\n", dev->name, result);
 		}
 	}
 	/*
@@ -774,11 +775,11 @@ static int init586(struct net_device *dev)
 		/* I don't understand this: do we really need memory after the init? */
 		int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
 		if (len <= 0) {
-			printk(KERN_ERR "%s: Ooooops, no memory for MC-Setup!\n", dev->name);
+			pr_err("%s: Ooooops, no memory for MC-Setup!\n", dev->name);
 		} else {
 			if (len < num_addrs) {
 				num_addrs = len;
-				printk(KERN_WARNING "%s: Sorry, can only apply %d MC-Address(es).\n",
+				pr_warning("%s: Sorry, can only apply %d MC-Address(es).\n",
 				       dev->name, num_addrs);
 			}
 			mc_cmd = (struct mcsetup_cmd_struct *) ptr;
@@ -799,7 +800,7 @@ static int init586(struct net_device *dev)
 					break;
 			}
 			if (!(mc_cmd->cmd_status & STAT_COMPL)) {
-				printk(KERN_WARNING "%s: Can't apply multicast-address-list.\n", dev->name);
+				pr_warning("%s: Can't apply multicast-address-list.\n", dev->name);
 			}
 		}
 	}
@@ -812,7 +813,7 @@ static int init586(struct net_device *dev)
 		p->xmit_buffs[i] = (struct tbd_struct *) ptr;	/* TBD */
 		ptr = (char *) ptr + sizeof(struct tbd_struct);
 		if ((void *) ptr > (void *) p->iscp) {
-			printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n", dev->name);
+			pr_err("%s: not enough shared-mem for your configuration!\n", dev->name);
 			return 1;
 		}
 		memset((char *) (p->xmit_cmds[i]), 0, sizeof(struct transmit_cmd_struct));
@@ -936,7 +937,8 @@ elmc_interrupt(int irq, void *dev_id)
 		if (stat & STAT_CNA) {
 			/* CU went 'not ready' */
 			if (netif_running(dev)) {
-				printk(KERN_WARNING "%s: oops! CU has left active state. stat: %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
+				pr_warning("%s: oops! CU has left active state. stat: %04x/%04x.\n",
+					dev->name, (int) stat, (int) p->scb->status);
 			}
 		}
 #endif
@@ -951,7 +953,8 @@ elmc_interrupt(int irq, void *dev_id)
 				p->scb->cmd = RUC_RESUME;
 				elmc_attn586();
 			} else {
-				printk(KERN_WARNING "%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
+				pr_warning("%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n",
+					dev->name, (int) stat, (int) p->scb->status);
 				elmc_rnr_int(dev);
 			}
 		}
@@ -995,11 +998,11 @@ static void elmc_rcv_int(struct net_device *dev)
 					dev->stats.rx_dropped++;
 				}
 			} else {
-				printk(KERN_WARNING "%s: received oversized frame.\n", dev->name);
+				pr_warning("%s: received oversized frame.\n", dev->name);
 				dev->stats.rx_dropped++;
 			}
 		} else {	/* frame !(ok), only with 'save-bad-frames' */
-			printk(KERN_WARNING "%s: oops! rfd-error-status: %04x\n", dev->name, status);
+			pr_warning("%s: oops! rfd-error-status: %04x\n", dev->name, status);
 			dev->stats.rx_errors++;
 		}
 		p->rfd_top->status = 0;
@@ -1028,7 +1031,7 @@ static void elmc_rnr_int(struct net_device *dev)
 	alloc_rfa(dev, (char *) p->rfd_first);
 	startrecv586(dev);	/* restart RU */
 
-	printk(KERN_WARNING "%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status);
+	pr_warning("%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status);
 
 }
 
@@ -1043,7 +1046,7 @@ static void elmc_xmt_int(struct net_device *dev)
 
 	status = p->xmit_cmds[p->xmit_last]->cmd_status;
 	if (!(status & STAT_COMPL)) {
-		printk(KERN_WARNING "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
+		pr_warning("%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
 	}
 	if (status & STAT_OK) {
 		dev->stats.tx_packets++;
@@ -1051,18 +1054,18 @@ static void elmc_xmt_int(struct net_device *dev)
 	} else {
 		dev->stats.tx_errors++;
 		if (status & TCMD_LATECOLL) {
-			printk(KERN_WARNING "%s: late collision detected.\n", dev->name);
+			pr_warning("%s: late collision detected.\n", dev->name);
 			dev->stats.collisions++;
 		} else if (status & TCMD_NOCARRIER) {
 			dev->stats.tx_carrier_errors++;
-			printk(KERN_WARNING "%s: no carrier detected.\n", dev->name);
+			pr_warning("%s: no carrier detected.\n", dev->name);
 		} else if (status & TCMD_LOSTCTS) {
-			printk(KERN_WARNING "%s: loss of CTS detected.\n", dev->name);
+			pr_warning("%s: loss of CTS detected.\n", dev->name);
 		} else if (status & TCMD_UNDERRUN) {
 			dev->stats.tx_fifo_errors++;
-			printk(KERN_WARNING "%s: DMA underrun detected.\n", dev->name);
+			pr_warning("%s: DMA underrun detected.\n", dev->name);
 		} else if (status & TCMD_MAXCOLL) {
-			printk(KERN_WARNING "%s: Max. collisions exceeded.\n", dev->name);
+			pr_warning("%s: Max. collisions exceeded.\n", dev->name);
 			dev->stats.collisions += 16;
 		}
 	}
@@ -1099,10 +1102,11 @@ static void elmc_timeout(struct net_device *dev)
 	struct priv *p = netdev_priv(dev);
 	/* COMMAND-UNIT active? */
 	if (p->scb->status & CU_ACTIVE) {
-#ifdef DEBUG
-		printk("%s: strange ... timeout with CU active?!?\n", dev->name);
-		printk("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name, (int) p->xmit_cmds[0]->cmd_status, (int) p->nop_cmds[0]->cmd_status, (int) p->nop_cmds[1]->cmd_status, (int) p->nop_point);
-#endif
+		pr_debug("%s: strange ... timeout with CU active?!?\n", dev->name);
+		pr_debug("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name,
+			(int)p->xmit_cmds[0]->cmd_status,
+			(int)p->nop_cmds[0]->cmd_status,
+			(int)p->nop_cmds[1]->cmd_status, (int)p->nop_point);
 		p->scb->cmd = CUC_ABORT;
 		elmc_attn586();
 		WAIT_4_SCB_CMD();
@@ -1112,10 +1116,10 @@ static void elmc_timeout(struct net_device *dev)
 		WAIT_4_SCB_CMD();
 		netif_wake_queue(dev);
 	} else {
-#ifdef DEBUG
-		printk("%s: xmitter timed out, try to restart! stat: %04x\n", dev->name, p->scb->status);
-		printk("%s: command-stats: %04x %04x\n", dev->name, p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status);
-#endif
+		pr_debug("%s: xmitter timed out, try to restart! stat: %04x\n",
+			dev->name, p->scb->status);
+		pr_debug("%s: command-stats: %04x %04x\n", dev->name,
+			p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status);
 		elmc_close(dev);
 		elmc_open(dev);
 	}
@@ -1162,7 +1166,7 @@ static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev)
 			break;
 		}
 		if (i == 15) {
-			printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name);
+			pr_warning("%s: Can't start transmit-command.\n", dev->name);
 		}
 	}
 #else
@@ -1287,11 +1291,12 @@ int __init init_module(void)
 		free_netdev(dev);
 		if (io[this_dev]==0)
 			break;
-		printk(KERN_WARNING "3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]);
+		pr_warning("3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]);
 	}
 
 	if(found==0) {
-		if(io[0]==0) printk(KERN_NOTICE "3c523.c: No 3c523 cards found\n");
+		if (io[0]==0)
+			pr_notice("3c523.c: No 3c523 cards found\n");
 		return -ENXIO;
 	} else return 0;
 }
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index b61073c42bf..aaa8a9f405d 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -125,8 +125,6 @@ static const char* cardname = DRV_NAME;
 #define NET_DEBUG 2
 #endif
 
-#undef DEBUG_IRQ
-
 static unsigned int mc32_debug = NET_DEBUG;
 
 /* The number of low I/O ports used by the ethercard. */
@@ -351,15 +349,15 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	/* Time to play MCA games */
 
 	if (mc32_debug  &&  version_printed++ == 0)
-		printk(KERN_DEBUG "%s", version);
+		pr_debug("%s", version);
 
-	printk(KERN_INFO "%s: %s found in slot %d:", dev->name, cardname, slot);
+	pr_info("%s: %s found in slot %d: ", dev->name, cardname, slot);
 
 	POS = mca_read_stored_pos(slot, 2);
 
 	if(!(POS&1))
 	{
-		printk(" disabled.\n");
+		pr_cont("disabled.\n");
 		return -ENODEV;
 	}
 
@@ -370,7 +368,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	POS = mca_read_stored_pos(slot, 4);
 	if(!(POS&1))
 	{
-		printk("memory window disabled.\n");
+		pr_cont("memory window disabled.\n");
 		return -ENODEV;
 	}
 
@@ -379,7 +377,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	i=(POS>>4)&3;
 	if(i==3)
 	{
-		printk("invalid memory window.\n");
+		pr_cont("invalid memory window.\n");
 		return -ENODEV;
 	}
 
@@ -392,11 +390,11 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 
 	if(!request_region(dev->base_addr, MC32_IO_EXTENT, cardname))
 	{
-		printk("io 0x%3lX, which is busy.\n", dev->base_addr);
+		pr_cont("io 0x%3lX, which is busy.\n", dev->base_addr);
 		return -EBUSY;
 	}
 
-	printk("io 0x%3lX irq %d mem 0x%lX (%dK)\n",
+	pr_cont("io 0x%3lX irq %d mem 0x%lX (%dK)\n",
 		dev->base_addr, dev->irq, dev->mem_start, i/1024);
 
 
@@ -416,7 +414,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 		dev->dev_addr[i] = mca_read_pos(slot,3);
 	}
 
-	printk("%s: Address %pM", dev->name, dev->dev_addr);
+	pr_info("%s: Address %pM ", dev->name, dev->dev_addr);
 
 	mca_write_pos(slot, 6, 0);
 	mca_write_pos(slot, 7, 0);
@@ -424,9 +422,9 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	POS = mca_read_stored_pos(slot, 4);
 
 	if(POS&2)
-		printk(" : BNC port selected.\n");
+		pr_cont(": BNC port selected.\n");
 	else
-		printk(" : AUI port selected.\n");
+		pr_cont(": AUI port selected.\n");
 
 	POS=inb(dev->base_addr+HOST_CTRL);
 	POS|=HOST_CTRL_ATTN|HOST_CTRL_RESET;
@@ -447,7 +445,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	err = request_irq(dev->irq, &mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev);
 	if (err) {
 		release_region(dev->base_addr, MC32_IO_EXTENT);
-		printk(KERN_ERR "%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
+		pr_err("%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
 		goto err_exit_ports;
 	}
 
@@ -463,7 +461,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 		i++;
 		if(i == 1000)
 		{
-			printk(KERN_ERR "%s: failed to boot adapter.\n", dev->name);
+			pr_err("%s: failed to boot adapter.\n", dev->name);
 			err = -ENODEV;
 			goto err_exit_irq;
 		}
@@ -475,10 +473,10 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	if(base>0)
 	{
 		if(base < 0x0C)
-			printk(KERN_ERR "%s: %s%s.\n", dev->name, failures[base-1],
+			pr_err("%s: %s%s.\n", dev->name, failures[base-1],
 				base<0x0A?" test failure":"");
 		else
-			printk(KERN_ERR "%s: unknown failure %d.\n", dev->name, base);
+			pr_err("%s: unknown failure %d.\n", dev->name, base);
 		err = -ENODEV;
 		goto err_exit_irq;
 	}
@@ -494,7 +492,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 			udelay(50);
 			if(n>100)
 			{
-				printk(KERN_ERR "%s: mailbox read fail (%d).\n", dev->name, i);
+				pr_err("%s: mailbox read fail (%d).\n", dev->name, i);
 				err = -ENODEV;
 				goto err_exit_irq;
 			}
@@ -527,7 +525,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	init_completion(&lp->execution_cmd);
 	init_completion(&lp->xceiver_cmd);
 
-	printk("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
+	pr_info("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
 		dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base);
 
 	dev->netdev_ops		= &netdev_ops;
@@ -939,7 +937,7 @@ static int mc32_open(struct net_device *dev)
 	 */
 
 	if(mc32_command(dev, 8, descnumbuffs, 4)) {
-		printk("%s: %s rejected our buffer configuration!\n",
+		pr_info("%s: %s rejected our buffer configuration!\n",
 	 	       dev->name, cardname);
 		mc32_close(dev);
 		return -ENOBUFS;
@@ -995,7 +993,7 @@ static int mc32_open(struct net_device *dev)
 
 static void mc32_timeout(struct net_device *dev)
 {
-	printk(KERN_WARNING "%s: transmit timed out?\n", dev->name);
+	pr_warning("%s: transmit timed out?\n", dev->name);
 	/* Try to restart the adaptor. */
 	netif_wake_queue(dev);
 }
@@ -1032,7 +1030,7 @@ static int mc32_send_packet(struct sk_buff *skb, struct net_device *dev)
 	netif_stop_queue(dev);
 
 	if(atomic_read(&lp->tx_count)==0) {
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	if (skb_padto(skb, ETH_ZLEN)) {
@@ -1335,11 +1333,9 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
 	{
 		status=inb(ioaddr+HOST_CMD);
 
-#ifdef DEBUG_IRQ
-		printk("Status TX%d RX%d EX%d OV%d BC%d\n",
+		pr_debug("Status TX%d RX%d EX%d OV%d BC%d\n",
 			(status&7), (status>>3)&7, (status>>6)&1,
 			(status>>7)&1, boguscount);
-#endif
 
 		switch(status&7)
 		{
@@ -1354,7 +1350,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
 				complete(&lp->xceiver_cmd);
 				break;
 			default:
-				printk("%s: strange tx ack %d\n", dev->name, status&7);
+				pr_notice("%s: strange tx ack %d\n", dev->name, status&7);
 		}
 		status>>=3;
 		switch(status&7)
@@ -1376,7 +1372,7 @@ static irqreturn_t mc32_interrupt(int irq, void *dev_id)
 				mc32_start_transceiver(dev);
 				break;
 			default:
-				printk("%s: strange rx ack %d\n",
+				pr_notice("%s: strange rx ack %d\n",
 					dev->name, status&7);
 		}
 		status>>=3;
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index c5669840242..c34aee91250 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -828,14 +828,14 @@ static int vortex_resume(struct pci_dev *pdev)
 		pci_restore_state(pdev);
 		err = pci_enable_device(pdev);
 		if (err) {
-			printk(KERN_WARNING "%s: Could not enable device \n",
+			pr_warning("%s: Could not enable device\n",
 				dev->name);
 			return err;
 		}
 		pci_set_master(pdev);
 		if (request_irq(dev->irq, vp->full_bus_master_rx ?
 				&boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
-			printk(KERN_WARNING "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+			pr_warning("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
 			pci_disable_device(pdev);
 			return -EBUSY;
 		}
@@ -894,7 +894,7 @@ static int __devexit vortex_eisa_remove(struct device *device)
 	dev = eisa_get_drvdata(edev);
 
 	if (!dev) {
-		printk("vortex_eisa_remove called for Compaq device!\n");
+		pr_err("vortex_eisa_remove called for Compaq device!\n");
 		BUG();
 	}
 
@@ -1051,7 +1051,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	struct eisa_device *edev = NULL;
 
 	if (!printed_version) {
-		printk (version);
+		pr_info("%s", version);
 		printed_version = 1;
 	}
 
@@ -1068,7 +1068,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	dev = alloc_etherdev(sizeof(*vp));
 	retval = -ENOMEM;
 	if (!dev) {
-		printk (KERN_ERR PFX "unable to allocate etherdev, aborting\n");
+		pr_err(PFX "unable to allocate etherdev, aborting\n");
 		goto out;
 	}
 	SET_NETDEV_DEV(dev, gendev);
@@ -1100,9 +1100,9 @@ static int __devinit vortex_probe1(struct device *gendev,
 
 	print_info = (vortex_debug > 1);
 	if (print_info)
-		printk (KERN_INFO "See Documentation/networking/vortex.txt\n");
+		pr_info("See Documentation/networking/vortex.txt\n");
 
-	printk(KERN_INFO "%s: 3Com %s %s at %p.\n",
+	pr_info("%s: 3Com %s %s at %p.\n",
 	       print_name,
 	       pdev ? "PCI" : "EISA",
 	       vci->name,
@@ -1144,10 +1144,9 @@ static int __devinit vortex_probe1(struct device *gendev,
 			   chip only. */
 			pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
 			if (pci_latency < new_latency) {
-				printk(KERN_INFO "%s: Overriding PCI latency"
-					" timer (CFLT) setting of %d, new value is %d.\n",
+				pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n",
 					print_name, pci_latency, new_latency);
-					pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
+				pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
 			}
 		}
 	}
@@ -1236,17 +1235,17 @@ static int __devinit vortex_probe1(struct device *gendev,
 		checksum = (checksum ^ (checksum >> 8)) & 0xff;
 	}
 	if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO))
-		printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+		pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
 	for (i = 0; i < 3; i++)
 		((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]);
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 	if (print_info)
-		printk(" %pM", dev->dev_addr);
+		pr_cont(" %pM", dev->dev_addr);
 	/* Unfortunately an all zero eeprom passes the checksum and this
 	   gets found in the wild in failure cases. Crypto is hard 8) */
 	if (!is_valid_ether_addr(dev->dev_addr)) {
 		retval = -EINVAL;
-		printk(KERN_ERR "*** EEPROM MAC address is invalid.\n");
+		pr_err("*** EEPROM MAC address is invalid.\n");
 		goto free_ring;	/* With every pack */
 	}
 	EL3WINDOW(2);
@@ -1254,17 +1253,17 @@ static int __devinit vortex_probe1(struct device *gendev,
 		iowrite8(dev->dev_addr[i], ioaddr + i);
 
 	if (print_info)
-		printk(", IRQ %d\n", dev->irq);
+		pr_cont(", IRQ %d\n", dev->irq);
 	/* Tell them about an invalid IRQ. */
 	if (dev->irq <= 0 || dev->irq >= nr_irqs)
-		printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n",
+		pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n",
 			   dev->irq);
 
 	EL3WINDOW(4);
 	step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;
 	if (print_info) {
-		printk(KERN_INFO "  product code %02x%02x rev %02x.%d date %02d-"
-			"%02d-%02d\n", eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
+		pr_info("  product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n",
+			eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
 			step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9);
 	}
 
@@ -1279,8 +1278,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		}
 
 		if (print_info) {
-			printk(KERN_INFO "%s: CardBus functions mapped "
-				"%16.16llx->%p\n",
+			pr_info("%s: CardBus functions mapped %16.16llx->%p\n",
 				print_name,
 				(unsigned long long)pci_resource_start(pdev, 2),
 				vp->cb_fn_base);
@@ -1307,7 +1305,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (vp->info1 & 0x8000) {
 		vp->full_duplex = 1;
 		if (print_info)
-			printk(KERN_INFO "Full duplex capable\n");
+			pr_info("Full duplex capable\n");
 	}
 
 	{
@@ -1319,9 +1317,9 @@ static int __devinit vortex_probe1(struct device *gendev,
 			vp->available_media = 0x40;
 		config = ioread32(ioaddr + Wn3_Config);
 		if (print_info) {
-			printk(KERN_DEBUG "  Internal config register is %4.4x, "
-				   "transceivers %#x.\n", config, ioread16(ioaddr + Wn3_Options));
-			printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+			pr_debug("  Internal config register is %4.4x, transceivers %#x.\n",
+				config, ioread16(ioaddr + Wn3_Options));
+			pr_info("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
 				   8 << RAM_SIZE(config),
 				   RAM_WIDTH(config) ? "word" : "byte",
 				   ram_split[RAM_SPLIT(config)],
@@ -1336,7 +1334,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	}
 
 	if (vp->media_override != 7) {
-		printk(KERN_INFO "%s:  Media override to transceiver type %d (%s).\n",
+		pr_info("%s:  Media override to transceiver type %d (%s).\n",
 				print_name, vp->media_override,
 				media_tbl[vp->media_override].name);
 		dev->if_port = vp->media_override;
@@ -1369,8 +1367,8 @@ static int __devinit vortex_probe1(struct device *gendev,
 			if (mii_status  &&  mii_status != 0xffff) {
 				vp->phys[phy_idx++] = phyx;
 				if (print_info) {
-					printk(KERN_INFO "  MII transceiver found at address %d,"
-						" status %4x.\n", phyx, mii_status);
+					pr_info("  MII transceiver found at address %d, status %4x.\n",
+						phyx, mii_status);
 				}
 				if ((mii_status & 0x0040) == 0)
 					mii_preamble_required++;
@@ -1378,7 +1376,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		}
 		mii_preamble_required--;
 		if (phy_idx == 0) {
-			printk(KERN_WARNING"  ***WARNING*** No MII transceivers found!\n");
+			pr_warning("  ***WARNING*** No MII transceivers found!\n");
 			vp->phys[0] = 24;
 		} else {
 			vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
@@ -1394,7 +1392,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	if (vp->capabilities & CapBusMaster) {
 		vp->full_bus_master_tx = 1;
 		if (print_info) {
-			printk(KERN_INFO "  Enabling bus-master transmits and %s receives.\n",
+			pr_info("  Enabling bus-master transmits and %s receives.\n",
 			(vp->info2 & 1) ? "early" : "whole-frame" );
 		}
 		vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2;
@@ -1414,7 +1412,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 		dev->netdev_ops =  &vortex_netdev_ops;
 
 	if (print_info) {
-		printk(KERN_INFO "%s: scatter/gather %sabled. h/w checksums %sabled\n",
+		pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n",
 				print_name,
 				(dev->features & NETIF_F_SG) ? "en":"dis",
 				(dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
@@ -1442,7 +1440,7 @@ free_region:
 	if (vp->must_free_region)
 		release_region(dev->base_addr, vci->io_size);
 	free_netdev(dev);
-	printk(KERN_ERR PFX "vortex_probe1 fails.  Returns %d\n", retval);
+	pr_err(PFX "vortex_probe1 fails.  Returns %d\n", retval);
 out:
 	return retval;
 }
@@ -1464,13 +1462,13 @@ issue_and_wait(struct net_device *dev, int cmd)
 	for (i = 0; i < 100000; i++) {
 		if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
 			if (vortex_debug > 1)
-				printk(KERN_INFO "%s: command 0x%04x took %d usecs\n",
+				pr_info("%s: command 0x%04x took %d usecs\n",
 					   dev->name, cmd, i * 10);
 			return;
 		}
 		udelay(10);
 	}
-	printk(KERN_ERR "%s: command 0x%04x did not complete! Status=0x%x\n",
+	pr_err("%s: command 0x%04x did not complete! Status=0x%x\n",
 			   dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
 }
 
@@ -1480,7 +1478,7 @@ vortex_set_duplex(struct net_device *dev)
 	struct vortex_private *vp = netdev_priv(dev);
 	void __iomem *ioaddr = vp->ioaddr;
 
-	printk(KERN_INFO "%s:  setting %s-duplex.\n",
+	pr_info("%s:  setting %s-duplex.\n",
 		dev->name, (vp->full_duplex) ? "full" : "half");
 
 	EL3WINDOW(3);
@@ -1522,7 +1520,7 @@ vortex_up(struct net_device *dev)
 			pci_restore_state(VORTEX_PCI(vp));
 		err = pci_enable_device(VORTEX_PCI(vp));
 		if (err) {
-			printk(KERN_WARNING "%s: Could not enable device \n",
+			pr_warning("%s: Could not enable device\n",
 				dev->name);
 			goto err_out;
 		}
@@ -1533,14 +1531,14 @@ vortex_up(struct net_device *dev)
 	config = ioread32(ioaddr + Wn3_Config);
 
 	if (vp->media_override != 7) {
-		printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
+		pr_info("%s: Media override to transceiver %d (%s).\n",
 			   dev->name, vp->media_override,
 			   media_tbl[vp->media_override].name);
 		dev->if_port = vp->media_override;
 	} else if (vp->autoselect) {
 		if (vp->has_nway) {
 			if (vortex_debug > 1)
-				printk(KERN_INFO "%s: using NWAY device table, not %d\n",
+				pr_info("%s: using NWAY device table, not %d\n",
 								dev->name, dev->if_port);
 			dev->if_port = XCVR_NWAY;
 		} else {
@@ -1549,13 +1547,13 @@ vortex_up(struct net_device *dev)
 			while (! (vp->available_media & media_tbl[dev->if_port].mask))
 				dev->if_port = media_tbl[dev->if_port].next;
 			if (vortex_debug > 1)
-				printk(KERN_INFO "%s: first available media type: %s\n",
+				pr_info("%s: first available media type: %s\n",
 					dev->name, media_tbl[dev->if_port].name);
 		}
 	} else {
 		dev->if_port = vp->default_media;
 		if (vortex_debug > 1)
-			printk(KERN_INFO "%s: using default media %s\n",
+			pr_info("%s: using default media %s\n",
 				dev->name, media_tbl[dev->if_port].name);
 	}
 
@@ -1570,13 +1568,13 @@ vortex_up(struct net_device *dev)
 	vp->rx_oom_timer.function = rx_oom_timer;
 
 	if (vortex_debug > 1)
-		printk(KERN_DEBUG "%s: Initial media type %s.\n",
+		pr_debug("%s: Initial media type %s.\n",
 			   dev->name, media_tbl[dev->if_port].name);
 
 	vp->full_duplex = vp->mii.force_media;
 	config = BFINS(config, dev->if_port, 20, 4);
 	if (vortex_debug > 6)
-		printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
+		pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config);
 	iowrite32(config, ioaddr + Wn3_Config);
 
 	if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
@@ -1602,7 +1600,7 @@ vortex_up(struct net_device *dev)
 
 	if (vortex_debug > 1) {
 		EL3WINDOW(4);
-		printk(KERN_DEBUG "%s: vortex_up() irq %d media status %4.4x.\n",
+		pr_debug("%s: vortex_up() irq %d media status %4.4x.\n",
 			   dev->name, dev->irq, ioread16(ioaddr + Wn4_Media));
 	}
 
@@ -1704,13 +1702,13 @@ vortex_open(struct net_device *dev)
 	/* Use the now-standard shared IRQ implementation. */
 	if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ?
 				&boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev))) {
-		printk(KERN_ERR "%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+		pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
 		goto err;
 	}
 
 	if (vp->full_bus_master_rx) { /* Boomerang bus master. */
 		if (vortex_debug > 2)
-			printk(KERN_DEBUG "%s:  Filling in the Rx ring.\n", dev->name);
+			pr_debug("%s:  Filling in the Rx ring.\n", dev->name);
 		for (i = 0; i < RX_RING_SIZE; i++) {
 			struct sk_buff *skb;
 			vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
@@ -1728,7 +1726,7 @@ vortex_open(struct net_device *dev)
 		}
 		if (i != RX_RING_SIZE) {
 			int j;
-			printk(KERN_EMERG "%s: no memory for rx ring\n", dev->name);
+			pr_emerg("%s: no memory for rx ring\n", dev->name);
 			for (j = 0; j < i; j++) {
 				if (vp->rx_skbuff[j]) {
 					dev_kfree_skb(vp->rx_skbuff[j]);
@@ -1750,7 +1748,7 @@ err_free_irq:
 	free_irq(dev->irq, dev);
 err:
 	if (vortex_debug > 1)
-		printk(KERN_ERR "%s: vortex_open() fails: returning %d\n", dev->name, retval);
+		pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval);
 out:
 	return retval;
 }
@@ -1766,9 +1764,9 @@ vortex_timer(unsigned long data)
 	int media_status, old_window;
 
 	if (vortex_debug > 2) {
-		printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n",
+		pr_debug("%s: Media selection timer tick happened, %s.\n",
 			   dev->name, media_tbl[dev->if_port].name);
-		printk(KERN_DEBUG "dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
+		pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
 	}
 
 	disable_irq_lockdep(dev->irq);
@@ -1781,12 +1779,12 @@ vortex_timer(unsigned long data)
 			netif_carrier_on(dev);
 			ok = 1;
 			if (vortex_debug > 1)
-				printk(KERN_DEBUG "%s: Media %s has link beat, %x.\n",
+				pr_debug("%s: Media %s has link beat, %x.\n",
 					   dev->name, media_tbl[dev->if_port].name, media_status);
 		} else {
 			netif_carrier_off(dev);
 			if (vortex_debug > 1) {
-				printk(KERN_DEBUG "%s: Media %s has no link beat, %x.\n",
+				pr_debug("%s: Media %s has no link beat, %x.\n",
 					   dev->name, media_tbl[dev->if_port].name, media_status);
 			}
 		}
@@ -1802,7 +1800,7 @@ vortex_timer(unsigned long data)
 		break;
 	  default:					/* Other media types handled by Tx timeouts. */
 		if (vortex_debug > 1)
-		  printk(KERN_DEBUG "%s: Media %s has no indication, %x.\n",
+		  pr_debug("%s: Media %s has no indication, %x.\n",
 				 dev->name, media_tbl[dev->if_port].name, media_status);
 		ok = 1;
 	}
@@ -1822,13 +1820,11 @@ vortex_timer(unsigned long data)
 		if (dev->if_port == XCVR_Default) { /* Go back to default. */
 		  dev->if_port = vp->default_media;
 		  if (vortex_debug > 1)
-			printk(KERN_DEBUG "%s: Media selection failing, using default "
-				   "%s port.\n",
+			pr_debug("%s: Media selection failing, using default %s port.\n",
 				   dev->name, media_tbl[dev->if_port].name);
 		} else {
 			if (vortex_debug > 1)
-				printk(KERN_DEBUG "%s: Media selection failed, now trying "
-					   "%s port.\n",
+				pr_debug("%s: Media selection failed, now trying %s port.\n",
 					   dev->name, media_tbl[dev->if_port].name);
 			next_tick = media_tbl[dev->if_port].wait;
 		}
@@ -1843,13 +1839,13 @@ vortex_timer(unsigned long data)
 		iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
 			 ioaddr + EL3_CMD);
 		if (vortex_debug > 1)
-			printk(KERN_DEBUG "wrote 0x%08x to Wn3_Config\n", config);
+			pr_debug("wrote 0x%08x to Wn3_Config\n", config);
 		/* AKPM: FIXME: Should reset Rx & Tx here.  P60 of 3c90xc.pdf */
 	}
 
 leave_media_alone:
 	if (vortex_debug > 2)
-	  printk(KERN_DEBUG "%s: Media selection timer finished, %s.\n",
+	  pr_debug("%s: Media selection timer finished, %s.\n",
 			 dev->name, media_tbl[dev->if_port].name);
 
 	EL3WINDOW(old_window);
@@ -1865,21 +1861,21 @@ static void vortex_tx_timeout(struct net_device *dev)
 	struct vortex_private *vp = netdev_priv(dev);
 	void __iomem *ioaddr = vp->ioaddr;
 
-	printk(KERN_ERR "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+	pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
 		   dev->name, ioread8(ioaddr + TxStatus),
 		   ioread16(ioaddr + EL3_STATUS));
 	EL3WINDOW(4);
-	printk(KERN_ERR "  diagnostics: net %04x media %04x dma %08x fifo %04x\n",
+	pr_err("  diagnostics: net %04x media %04x dma %08x fifo %04x\n",
 			ioread16(ioaddr + Wn4_NetDiag),
 			ioread16(ioaddr + Wn4_Media),
 			ioread32(ioaddr + PktStatus),
 			ioread16(ioaddr + Wn4_FIFODiag));
 	/* Slight code bloat to be user friendly. */
 	if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
-		printk(KERN_ERR "%s: Transmitter encountered 16 collisions --"
+		pr_err("%s: Transmitter encountered 16 collisions --"
 			   " network cable problem?\n", dev->name);
 	if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
-		printk(KERN_ERR "%s: Interrupt posted but not delivered --"
+		pr_err("%s: Interrupt posted but not delivered --"
 			   " IRQ blocked by another device?\n", dev->name);
 		/* Bad idea here.. but we might as well handle a few events. */
 		{
@@ -1903,7 +1899,7 @@ static void vortex_tx_timeout(struct net_device *dev)
 
 	dev->stats.tx_errors++;
 	if (vp->full_bus_master_tx) {
-		printk(KERN_DEBUG "%s: Resetting the Tx ring pointer.\n", dev->name);
+		pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name);
 		if (vp->cur_tx - vp->dirty_tx > 0  &&  ioread32(ioaddr + DownListPtr) == 0)
 			iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
 				 ioaddr + DownListPtr);
@@ -1938,7 +1934,7 @@ vortex_error(struct net_device *dev, int status)
 	unsigned char tx_status = 0;
 
 	if (vortex_debug > 2) {
-		printk(KERN_ERR "%s: vortex_error(), status=0x%x\n", dev->name, status);
+		pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status);
 	}
 
 	if (status & TxComplete) {			/* Really "TxError" for us. */
@@ -1946,10 +1942,10 @@ vortex_error(struct net_device *dev, int status)
 		/* Presumably a tx-timeout. We must merely re-enable. */
 		if (vortex_debug > 2
 			|| (tx_status != 0x88 && vortex_debug > 0)) {
-			printk(KERN_ERR "%s: Transmit error, Tx status register %2.2x.\n",
+			pr_err("%s: Transmit error, Tx status register %2.2x.\n",
 				   dev->name, tx_status);
 			if (tx_status == 0x82) {
-				printk(KERN_ERR "Probably a duplex mismatch.  See "
+				pr_err("Probably a duplex mismatch.  See "
 						"Documentation/networking/vortex.txt\n");
 			}
 			dump_tx_ring(dev);
@@ -1975,13 +1971,13 @@ vortex_error(struct net_device *dev, int status)
 	if (status & StatsFull) {			/* Empty statistics. */
 		static int DoneDidThat;
 		if (vortex_debug > 4)
-			printk(KERN_DEBUG "%s: Updating stats.\n", dev->name);
+			pr_debug("%s: Updating stats.\n", dev->name);
 		update_stats(ioaddr, dev);
 		/* HACK: Disable statistics as an interrupt source. */
 		/* This occurs when we have the wrong media type! */
 		if (DoneDidThat == 0  &&
 			ioread16(ioaddr + EL3_STATUS) & StatsFull) {
-			printk(KERN_WARNING "%s: Updating statistics failed, disabling "
+			pr_warning("%s: Updating statistics failed, disabling "
 				   "stats as an interrupt source.\n", dev->name);
 			EL3WINDOW(5);
 			iowrite16(SetIntrEnb | (ioread16(ioaddr + 10) & ~StatsFull), ioaddr + EL3_CMD);
@@ -1998,7 +1994,7 @@ vortex_error(struct net_device *dev, int status)
 		u16 fifo_diag;
 		EL3WINDOW(4);
 		fifo_diag = ioread16(ioaddr + Wn4_FIFODiag);
-		printk(KERN_ERR "%s: Host error, FIFO diagnostic register %4.4x.\n",
+		pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n",
 			   dev->name, fifo_diag);
 		/* Adapter failure requires Tx/Rx reset and reinit. */
 		if (vp->full_bus_master_tx) {
@@ -2006,7 +2002,7 @@ vortex_error(struct net_device *dev, int status)
 			/* 0x80000000 PCI master abort. */
 			/* 0x40000000 PCI target abort. */
 			if (vortex_debug)
-				printk(KERN_ERR "%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
+				pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
 
 			/* In this case, blow the card away */
 			/* Must not enter D3 or we can't legally issue the reset! */
@@ -2075,7 +2071,7 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		while (--i > 0	&&	(tx_status = ioread8(ioaddr + TxStatus)) > 0) {
 			if (tx_status & 0x3C) {		/* A Tx-disabling error occurred.  */
 				if (vortex_debug > 2)
-				  printk(KERN_DEBUG "%s: Tx error, status %2.2x.\n",
+				  pr_debug("%s: Tx error, status %2.2x.\n",
 						 dev->name, tx_status);
 				if (tx_status & 0x04) dev->stats.tx_fifo_errors++;
 				if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
@@ -2101,17 +2097,17 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 
 	if (vortex_debug > 6) {
-		printk(KERN_DEBUG "boomerang_start_xmit()\n");
-		printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n",
+		pr_debug("boomerang_start_xmit()\n");
+		pr_debug("%s: Trying to send a packet, Tx index %d.\n",
 			   dev->name, vp->cur_tx);
 	}
 
 	if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
 		if (vortex_debug > 0)
-			printk(KERN_WARNING "%s: BUG! Tx Ring full, refusing to send buffer.\n",
+			pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n",
 				   dev->name);
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	vp->tx_skbuff[entry] = skb;
@@ -2204,7 +2200,7 @@ vortex_interrupt(int irq, void *dev_id)
 	status = ioread16(ioaddr + EL3_STATUS);
 
 	if (vortex_debug > 6)
-		printk("vortex_interrupt(). status=0x%4x\n", status);
+		pr_debug("vortex_interrupt(). status=0x%4x\n", status);
 
 	if ((status & IntLatch) == 0)
 		goto handler_exit;		/* No interrupt: shared IRQs cause this */
@@ -2219,19 +2215,19 @@ vortex_interrupt(int irq, void *dev_id)
 		goto handler_exit;
 
 	if (vortex_debug > 4)
-		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+		pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
 			   dev->name, status, ioread8(ioaddr + Timer));
 
 	do {
 		if (vortex_debug > 5)
-				printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+				pr_debug("%s: In interrupt loop, status %4.4x.\n",
 					   dev->name, status);
 		if (status & RxComplete)
 			vortex_rx(dev);
 
 		if (status & TxAvailable) {
 			if (vortex_debug > 5)
-				printk(KERN_DEBUG "	TX room bit was handled.\n");
+				pr_debug("	TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
 			iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue (dev);
@@ -2263,8 +2259,8 @@ vortex_interrupt(int irq, void *dev_id)
 		}
 
 		if (--work_done < 0) {
-			printk(KERN_WARNING "%s: Too much work in interrupt, status "
-				   "%4.4x.\n", dev->name, status);
+			pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+				dev->name, status);
 			/* Disable all pending interrupts. */
 			do {
 				vp->deferred |= status;
@@ -2281,7 +2277,7 @@ vortex_interrupt(int irq, void *dev_id)
 	} while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
 
 	if (vortex_debug > 4)
-		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+		pr_debug("%s: exiting interrupt, status %4.4x.\n",
 			   dev->name, status);
 handler_exit:
 	spin_unlock(&vp->lock);
@@ -2313,14 +2309,14 @@ boomerang_interrupt(int irq, void *dev_id)
 	status = ioread16(ioaddr + EL3_STATUS);
 
 	if (vortex_debug > 6)
-		printk(KERN_DEBUG "boomerang_interrupt. status=0x%4x\n", status);
+		pr_debug("boomerang_interrupt. status=0x%4x\n", status);
 
 	if ((status & IntLatch) == 0)
 		goto handler_exit;		/* No interrupt: shared IRQs can cause this */
 
 	if (status == 0xffff) {		/* h/w no longer present (hotplug)? */
 		if (vortex_debug > 1)
-			printk(KERN_DEBUG "boomerang_interrupt(1): status = 0xffff\n");
+			pr_debug("boomerang_interrupt(1): status = 0xffff\n");
 		goto handler_exit;
 	}
 
@@ -2330,16 +2326,16 @@ boomerang_interrupt(int irq, void *dev_id)
 	}
 
 	if (vortex_debug > 4)
-		printk(KERN_DEBUG "%s: interrupt, status %4.4x, latency %d ticks.\n",
+		pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
 			   dev->name, status, ioread8(ioaddr + Timer));
 	do {
 		if (vortex_debug > 5)
-				printk(KERN_DEBUG "%s: In interrupt loop, status %4.4x.\n",
+				pr_debug("%s: In interrupt loop, status %4.4x.\n",
 					   dev->name, status);
 		if (status & UpComplete) {
 			iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
 			if (vortex_debug > 5)
-				printk(KERN_DEBUG "boomerang_interrupt->boomerang_rx\n");
+				pr_debug("boomerang_interrupt->boomerang_rx\n");
 			boomerang_rx(dev);
 		}
 
@@ -2374,7 +2370,7 @@ boomerang_interrupt(int irq, void *dev_id)
 					dev_kfree_skb_irq(skb);
 					vp->tx_skbuff[entry] = NULL;
 				} else {
-					printk(KERN_DEBUG "boomerang_interrupt: no skb!\n");
+					pr_debug("boomerang_interrupt: no skb!\n");
 				}
 				/* dev->stats.tx_packets++;  Counted below. */
 				dirty_tx++;
@@ -2382,7 +2378,7 @@ boomerang_interrupt(int irq, void *dev_id)
 			vp->dirty_tx = dirty_tx;
 			if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) {
 				if (vortex_debug > 6)
-					printk(KERN_DEBUG "boomerang_interrupt: wake queue\n");
+					pr_debug("boomerang_interrupt: wake queue\n");
 				netif_wake_queue (dev);
 			}
 		}
@@ -2392,8 +2388,8 @@ boomerang_interrupt(int irq, void *dev_id)
 			vortex_error(dev, status);
 
 		if (--work_done < 0) {
-			printk(KERN_WARNING "%s: Too much work in interrupt, status "
-				   "%4.4x.\n", dev->name, status);
+			pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+				dev->name, status);
 			/* Disable all pending interrupts. */
 			do {
 				vp->deferred |= status;
@@ -2413,7 +2409,7 @@ boomerang_interrupt(int irq, void *dev_id)
 	} while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
 
 	if (vortex_debug > 4)
-		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n",
+		pr_debug("%s: exiting interrupt, status %4.4x.\n",
 			   dev->name, status);
 handler_exit:
 	spin_unlock(&vp->lock);
@@ -2428,13 +2424,13 @@ static int vortex_rx(struct net_device *dev)
 	short rx_status;
 
 	if (vortex_debug > 5)
-		printk(KERN_DEBUG "vortex_rx(): status %4.4x, rx_status %4.4x.\n",
+		pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n",
 			   ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
 	while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
 		if (rx_status & 0x4000) { /* Error, update stats. */
 			unsigned char rx_error = ioread8(ioaddr + RxErrors);
 			if (vortex_debug > 2)
-				printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+				pr_debug(" Rx error: status %2.2x.\n", rx_error);
 			dev->stats.rx_errors++;
 			if (rx_error & 0x01)  dev->stats.rx_over_errors++;
 			if (rx_error & 0x02)  dev->stats.rx_length_errors++;
@@ -2448,7 +2444,7 @@ static int vortex_rx(struct net_device *dev)
 
 			skb = dev_alloc_skb(pkt_len + 5);
 			if (vortex_debug > 4)
-				printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 					   pkt_len, rx_status);
 			if (skb != NULL) {
 				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
@@ -2478,8 +2474,8 @@ static int vortex_rx(struct net_device *dev)
 						break;
 				continue;
 			} else if (vortex_debug > 0)
-				printk(KERN_NOTICE "%s: No memory to allocate a sk_buff of "
-					   "size %d.\n", dev->name, pkt_len);
+				pr_notice("%s: No memory to allocate a sk_buff of size %d.\n",
+					dev->name, pkt_len);
 			dev->stats.rx_dropped++;
 		}
 		issue_and_wait(dev, RxDiscard);
@@ -2498,7 +2494,7 @@ boomerang_rx(struct net_device *dev)
 	int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx;
 
 	if (vortex_debug > 5)
-		printk(KERN_DEBUG "boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
+		pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
 
 	while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
 		if (--rx_work_limit < 0)
@@ -2506,7 +2502,7 @@ boomerang_rx(struct net_device *dev)
 		if (rx_status & RxDError) { /* Error, update stats. */
 			unsigned char rx_error = rx_status >> 16;
 			if (vortex_debug > 2)
-				printk(KERN_DEBUG " Rx error: status %2.2x.\n", rx_error);
+				pr_debug(" Rx error: status %2.2x.\n", rx_error);
 			dev->stats.rx_errors++;
 			if (rx_error & 0x01)  dev->stats.rx_over_errors++;
 			if (rx_error & 0x02)  dev->stats.rx_length_errors++;
@@ -2520,7 +2516,7 @@ boomerang_rx(struct net_device *dev)
 			dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr);
 
 			if (vortex_debug > 4)
-				printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
+				pr_debug("Receiving packet size %d status %4.4x.\n",
 					   pkt_len, rx_status);
 
 			/* Check if the packet is long enough to just accept without
@@ -2566,7 +2562,7 @@ boomerang_rx(struct net_device *dev)
 			if (skb == NULL) {
 				static unsigned long last_jif;
 				if (time_after(jiffies, last_jif + 10 * HZ)) {
-					printk(KERN_WARNING "%s: memory shortage\n", dev->name);
+					pr_warning("%s: memory shortage\n", dev->name);
 					last_jif = jiffies;
 				}
 				if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)
@@ -2598,7 +2594,7 @@ rx_oom_timer(unsigned long arg)
 	if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)	/* This test is redundant, but makes me feel good */
 		boomerang_rx(dev);
 	if (vortex_debug > 1) {
-		printk(KERN_DEBUG "%s: rx_oom_timer %s\n", dev->name,
+		pr_debug("%s: rx_oom_timer %s\n", dev->name,
 			((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying");
 	}
 	spin_unlock_irq(&vp->lock);
@@ -2655,9 +2651,9 @@ vortex_close(struct net_device *dev)
 		vortex_down(dev, 1);
 
 	if (vortex_debug > 1) {
-		printk(KERN_DEBUG"%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
+		pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
 			   dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
-		printk(KERN_DEBUG "%s: vortex close stats: rx_nocopy %d rx_copy %d"
+		pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d"
 			   " tx_queued %d Rx pre-checksummed %d.\n",
 			   dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
 	}
@@ -2666,8 +2662,7 @@ vortex_close(struct net_device *dev)
 	if (vp->rx_csumhits &&
 	    (vp->drv_flags & HAS_HWCKSM) == 0 &&
 	    (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
-			printk(KERN_WARNING "%s supports hardware checksums, and we're "
-						"not using them!\n", dev->name);
+		pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name);
 	}
 #endif
 
@@ -2717,16 +2712,16 @@ dump_tx_ring(struct net_device *dev)
 			int i;
 			int stalled = ioread32(ioaddr + PktStatus) & 0x04;	/* Possible racy. But it's only debug stuff */
 
-			printk(KERN_ERR "  Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
+			pr_err("  Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
 					vp->full_bus_master_tx,
 					vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
 					vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
-			printk(KERN_ERR "  Transmit list %8.8x vs. %p.\n",
+			pr_err("  Transmit list %8.8x vs. %p.\n",
 				   ioread32(ioaddr + DownListPtr),
 				   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
 			issue_and_wait(dev, DownStall);
 			for (i = 0; i < TX_RING_SIZE; i++) {
-				printk(KERN_ERR "  %d: @%p  length %8.8x status %8.8x\n", i,
+				pr_err("  %d: @%p  length %8.8x status %8.8x\n", i,
 					   &vp->tx_ring[i],
 #if DO_ZEROCOPY
 					   le32_to_cpu(vp->tx_ring[i].frag[0].length),
@@ -2970,7 +2965,7 @@ static void set_rx_mode(struct net_device *dev)
 
 	if (dev->flags & IFF_PROMISC) {
 		if (vortex_debug > 3)
-			printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name);
+			pr_notice("%s: Setting promiscuous mode.\n", dev->name);
 		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
 	} else	if ((dev->mc_list)  ||  (dev->flags & IFF_ALLMULTI)) {
 		new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
@@ -3145,8 +3140,7 @@ static void acpi_set_WOL(struct net_device *dev)
 		iowrite16(RxEnable, ioaddr + EL3_CMD);
 
 		if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) {
-			printk(KERN_INFO "%s: WOL not supported.\n",
-					pci_name(VORTEX_PCI(vp)));
+			pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp)));
 
 			vp->enable_wol = 0;
 			return;
@@ -3164,7 +3158,7 @@ static void __devexit vortex_remove_one(struct pci_dev *pdev)
 	struct vortex_private *vp;
 
 	if (!dev) {
-		printk("vortex_remove_one called for Compaq device!\n");
+		pr_err("vortex_remove_one called for Compaq device!\n");
 		BUG();
 	}
 
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 7a331acc34a..69f5b7d298a 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -541,7 +541,7 @@ int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 
         if (!TX_BUFFS_AVAIL)
-                return -1;
+                return NETDEV_TX_LOCKED;
 
 	netif_stop_queue (dev);
 
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 02330f3d5a5..50efde11ea6 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -471,8 +471,7 @@ static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
 			    u32 status, u32 len)
 {
 	if (netif_msg_rx_err (cp))
-		printk (KERN_DEBUG
-			"%s: rx err, slot %d status 0x%x len %d\n",
+		pr_debug("%s: rx err, slot %d status 0x%x len %d\n",
 			cp->dev->name, rx_tail, status, len);
 	cp->dev->stats.rx_errors++;
 	if (status & RxErrFrame)
@@ -547,7 +546,7 @@ rx_status_loop:
 		}
 
 		if (netif_msg_rx_status(cp))
-			printk(KERN_DEBUG "%s: rx slot %d status 0x%x len %d\n",
+			pr_debug("%s: rx slot %d status 0x%x len %d\n",
 			       dev->name, rx_tail, status, len);
 
 		buflen = cp->rx_buf_sz + NET_IP_ALIGN;
@@ -626,7 +625,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 		return IRQ_NONE;
 
 	if (netif_msg_intr(cp))
-		printk(KERN_DEBUG "%s: intr, status %04x cmd %02x cpcmd %04x\n",
+		pr_debug("%s: intr, status %04x cmd %02x cpcmd %04x\n",
 		        dev->name, status, cpr8(Cmd), cpr16(CpCmd));
 
 	cpw16(IntrStatus, status & ~cp_rx_intr_mask);
@@ -658,7 +657,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 
 		pci_read_config_word(cp->pdev, PCI_STATUS, &pci_status);
 		pci_write_config_word(cp->pdev, PCI_STATUS, pci_status);
-		printk(KERN_ERR "%s: PCI bus error, status=%04x, PCI status=%04x\n",
+		pr_err("%s: PCI bus error, status=%04x, PCI status=%04x\n",
 		       dev->name, status, pci_status);
 
 		/* TODO: reset hardware */
@@ -705,7 +704,7 @@ static void cp_tx (struct cp_private *cp)
 		if (status & LastFrag) {
 			if (status & (TxError | TxFIFOUnder)) {
 				if (netif_msg_tx_err(cp))
-					printk(KERN_DEBUG "%s: tx err, status 0x%x\n",
+					pr_debug("%s: tx err, status 0x%x\n",
 					       cp->dev->name, status);
 				cp->dev->stats.tx_errors++;
 				if (status & TxOWC)
@@ -722,7 +721,7 @@ static void cp_tx (struct cp_private *cp)
 				cp->dev->stats.tx_packets++;
 				cp->dev->stats.tx_bytes += skb->len;
 				if (netif_msg_tx_done(cp))
-					printk(KERN_DEBUG "%s: tx done, slot %d\n", cp->dev->name, tx_tail);
+					pr_debug("%s: tx done, slot %d\n", cp->dev->name, tx_tail);
 			}
 			dev_kfree_skb_irq(skb);
 		}
@@ -755,9 +754,9 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
 		netif_stop_queue(dev);
 		spin_unlock_irqrestore(&cp->lock, intr_flags);
-		printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
+		pr_err(PFX "%s: BUG! Tx Ring full when queue awake!\n",
 		       dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 #if CP_VLAN_TAG_USED
@@ -882,7 +881,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	}
 	cp->tx_head = entry;
 	if (netif_msg_tx_queued(cp))
-		printk(KERN_DEBUG "%s: tx queued, slot %d, skblen %d\n",
+		pr_debug("%s: tx queued, slot %d, skblen %d\n",
 		       dev->name, entry, skb->len);
 	if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
 		netif_stop_queue(dev);
@@ -996,7 +995,7 @@ static void cp_reset_hw (struct cp_private *cp)
 		schedule_timeout_uninterruptible(10);
 	}
 
-	printk(KERN_ERR "%s: hardware reset timeout\n", cp->dev->name);
+	pr_err("%s: hardware reset timeout\n", cp->dev->name);
 }
 
 static inline void cp_start_hw (struct cp_private *cp)
@@ -1166,7 +1165,7 @@ static int cp_open (struct net_device *dev)
 	int rc;
 
 	if (netif_msg_ifup(cp))
-		printk(KERN_DEBUG "%s: enabling interface\n", dev->name);
+		pr_debug("%s: enabling interface\n", dev->name);
 
 	rc = cp_alloc_rings(cp);
 	if (rc)
@@ -1201,7 +1200,7 @@ static int cp_close (struct net_device *dev)
 	napi_disable(&cp->napi);
 
 	if (netif_msg_ifdown(cp))
-		printk(KERN_DEBUG "%s: disabling interface\n", dev->name);
+		pr_debug("%s: disabling interface\n", dev->name);
 
 	spin_lock_irqsave(&cp->lock, flags);
 
@@ -1224,7 +1223,7 @@ static void cp_tx_timeout(struct net_device *dev)
 	unsigned long flags;
 	int rc;
 
-	printk(KERN_WARNING "%s: Transmit timeout, status %2x %4x %4x %4x\n",
+	pr_warning("%s: Transmit timeout, status %2x %4x %4x %4x\n",
 	       dev->name, cpr8(Cmd), cpr16(CpCmd),
 	       cpr16(IntrStatus), cpr16(IntrMask));
 
@@ -1873,7 +1872,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 #ifndef MODULE
 	static int version_printed;
 	if (version_printed++ == 0)
-		printk("%s", version);
+		pr_info("%s", version);
 #endif
 
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
@@ -1995,8 +1994,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		goto err_out_iomap;
 
-	printk (KERN_INFO "%s: RTL-8139C+ at 0x%lx, "
-		"%pM, IRQ %d\n",
+	pr_info("%s: RTL-8139C+ at 0x%lx, %pM, IRQ %d\n",
 		dev->name,
 		dev->base_addr,
 		dev->dev_addr,
@@ -2113,7 +2111,7 @@ static struct pci_driver cp_driver = {
 static int __init cp_init (void)
 {
 #ifdef MODULE
-	printk("%s", version);
+	pr_info("%s", version);
 #endif
 	return pci_register_driver(&cp_driver);
 }
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 1fc45431a62..8ae72ec1445 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -126,19 +126,12 @@
 #undef RTL8139_NDEBUG
 
 
-#if RTL8139_DEBUG
-/* note: prints function name for you */
-#  define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
-#else
-#  define DPRINTK(fmt, args...)
-#endif
-
 #ifdef RTL8139_NDEBUG
 #  define assert(expr) do {} while (0)
 #else
 #  define assert(expr) \
         if(unlikely(!(expr))) {				        \
-        printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n",	\
+        pr_err("Assertion failed! %s,%s,%s,line=%d\n",	\
 	#expr, __FILE__, __func__, __LINE__);			\
         }
 #endif
@@ -784,8 +777,8 @@ static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
 
 	/* set this immediately, we need to know before
 	 * we talk to the chip directly */
-	DPRINTK("PIO region size == 0x%02X\n", pio_len);
-	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
+	pr_debug("PIO region size == 0x%02lX\n", pio_len);
+	pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
 
 retry:
 	if (use_io) {
@@ -865,19 +858,17 @@ retry:
 		}
 
 	/* if unknown chip, assume array element #0, original RTL-8139 in this case */
-	dev_printk (KERN_DEBUG, &pdev->dev,
-		    "unknown chip version, assuming RTL-8139\n");
-	dev_printk (KERN_DEBUG, &pdev->dev,
-		    "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+	dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+	dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
 	tp->chipset = 0;
 
 match:
-	DPRINTK ("chipset id (%d) == index %d, '%s'\n",
+	pr_debug("chipset id (%d) == index %d, '%s'\n",
 		 version, i, rtl_chip_info[i].name);
 
 	if (tp->chipset >= CH_8139B) {
 		u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
-		DPRINTK("PCI PM wakeup\n");
+		pr_debug("PCI PM wakeup\n");
 		if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
 		    (tmp8 & LWAKE))
 			new_tmp8 &= ~LWAKE;
@@ -896,7 +887,7 @@ match:
 			}
 		}
 	} else {
-		DPRINTK("Old chip wakeup\n");
+		pr_debug("Old chip wakeup\n");
 		tmp8 = RTL_R8 (Config1);
 		tmp8 &= ~(SLEEP | PWRDN);
 		RTL_W8 (Config1, tmp8);
@@ -949,7 +940,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	{
 		static int printed_version;
 		if (!printed_version++)
-			printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+			pr_info(RTL8139_DRIVER_NAME "\n");
 	}
 #endif
 
@@ -965,7 +956,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
 	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
 	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
-		printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
+		pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
 		use_io = 1;
 	}
 
@@ -1018,21 +1009,20 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	tp->mii.reg_num_mask = 0x1f;
 
 	/* dev is fully set up and ready to use now */
-	DPRINTK("about to register device named %s (%p)...\n", dev->name, dev);
+	pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
 	i = register_netdev (dev);
 	if (i) goto err_out;
 
 	pci_set_drvdata (pdev, dev);
 
-	printk (KERN_INFO "%s: %s at 0x%lx, "
-		"%pM, IRQ %d\n",
+	pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
 		dev->name,
 		board_info[ent->driver_data].name,
 		dev->base_addr,
 		dev->dev_addr,
 		dev->irq);
 
-	printk (KERN_DEBUG "%s:  Identified 8139 chip type '%s'\n",
+	pr_debug("%s:  Identified 8139 chip type '%s'\n",
 		dev->name, rtl_chip_info[tp->chipset].name);
 
 	/* Find the connected MII xcvrs.
@@ -1046,14 +1036,12 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
 				u16 advertising = mdio_read(dev, phy, 4);
 				tp->phys[phy_idx++] = phy;
-				printk(KERN_INFO "%s: MII transceiver %d status 0x%4.4x "
-					   "advertising %4.4x.\n",
+				pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
 					   dev->name, phy, mii_status, advertising);
 			}
 		}
 		if (phy_idx == 0) {
-			printk(KERN_INFO "%s: No MII transceivers found!  Assuming SYM "
-				   "transceiver.\n",
+			pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
 				   dev->name);
 			tp->phys[0] = 32;
 		}
@@ -1073,13 +1061,13 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	if (board_idx < MAX_UNITS  &&  full_duplex[board_idx] > 0)
 		tp->mii.full_duplex = full_duplex[board_idx];
 	if (tp->mii.full_duplex) {
-		printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
+		pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
 		/* Changing the MII-advertised media because might prevent
 		   re-connection. */
 		tp->mii.force_media = 1;
 	}
 	if (tp->default_port) {
-		printk(KERN_INFO "  Forcing %dMbps %s-duplex operation.\n",
+		pr_info("  Forcing %dMbps %s-duplex operation.\n",
 			   (option & 0x20 ? 100 : 10),
 			   (option & 0x10 ? "full" : "half"));
 		mdio_write(dev, tp->phys[0], 0,
@@ -1342,7 +1330,7 @@ static int rtl8139_open (struct net_device *dev)
 	netif_start_queue (dev);
 
 	if (netif_msg_ifup(tp))
-		printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
+		pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
 			" GP Pins %2.2x %s-duplex.\n", dev->name,
 			(unsigned long long)pci_resource_start (tp->pci_dev, 1),
 			dev->irq, RTL_R8 (MediaStatus),
@@ -1404,7 +1392,7 @@ static void rtl8139_hw_start (struct net_device *dev)
 		RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
 	}
 
-	DPRINTK("init buffer addresses\n");
+	pr_debug("init buffer addresses\n");
 
 	/* Lock Config[01234] and BMCR register writes */
 	RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1566,14 +1554,13 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
 			tp->mii.full_duplex = duplex;
 
 			if (mii_lpa) {
-				printk (KERN_INFO
-					"%s: Setting %s-duplex based on MII #%d link"
+				pr_info("%s: Setting %s-duplex based on MII #%d link"
 					" partner ability of %4.4x.\n",
 					dev->name,
 					tp->mii.full_duplex ? "full" : "half",
 					tp->phys[0], mii_lpa);
 			} else {
-				printk(KERN_INFO"%s: media is unconnected, link down, or incompatible connection\n",
+				pr_info("%s: media is unconnected, link down, or incompatible connection\n",
 				       dev->name);
 			}
 #if 0
@@ -1588,11 +1575,11 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
 
 	rtl8139_tune_twister (dev, tp);
 
-	DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
+	pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
 		 dev->name, RTL_R16 (NWayLPAR));
-	DPRINTK ("%s:  Other registers are IntMask %4.4x IntStatus %4.4x\n",
+	pr_debug("%s:  Other registers are IntMask %4.4x IntStatus %4.4x\n",
 		 dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
-	DPRINTK ("%s:  Chip config %2.2x %2.2x.\n",
+	pr_debug("%s:  Chip config %2.2x %2.2x.\n",
 		 dev->name, RTL_R8 (Config0),
 		 RTL_R8 (Config1));
 }
@@ -1652,14 +1639,14 @@ static void rtl8139_tx_timeout_task (struct work_struct *work)
 	int i;
 	u8 tmp8;
 
-	printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
-		"media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
+	pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
+		dev->name, RTL_R8 (ChipCmd),
 		RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
 	/* Emit info to figure out what went wrong. */
-	printk (KERN_DEBUG "%s: Tx queue start entry %ld  dirty entry %ld.\n",
+	pr_debug("%s: Tx queue start entry %ld  dirty entry %ld.\n",
 		dev->name, tp->cur_tx, tp->dirty_tx);
 	for (i = 0; i < NUM_TX_DESC; i++)
-		printk (KERN_DEBUG "%s:  Tx descriptor %d is %8.8lx.%s\n",
+		pr_debug("%s:  Tx descriptor %d is %8.8lx.%s\n",
 			dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
 			i == tp->dirty_tx % NUM_TX_DESC ?
 				" (queue head)" : "");
@@ -1741,7 +1728,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&tp->lock, flags);
 
 	if (netif_msg_tx_queued(tp))
-		printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
+		pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
 			dev->name, len, entry);
 
 	return 0;
@@ -1772,7 +1759,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
 		if (txstatus & (TxOutOfWindow | TxAborted)) {
 			/* There was an major error, log it. */
 			if (netif_msg_tx_err(tp))
-				printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+				pr_debug("%s: Transmit error, Tx status %8.8x.\n",
 					dev->name, txstatus);
 			dev->stats.tx_errors++;
 			if (txstatus & TxAborted) {
@@ -1803,7 +1790,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
 
 #ifndef RTL8139_NDEBUG
 	if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
-		printk (KERN_ERR "%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
+		pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
 		        dev->name, dirty_tx, tp->cur_tx);
 		dirty_tx += NUM_TX_DESC;
 	}
@@ -1828,12 +1815,12 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 #endif
 
 	if (netif_msg_rx_err (tp))
-		printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
+		pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
 			dev->name, rx_status);
 	dev->stats.rx_errors++;
 	if (!(rx_status & RxStatusOK)) {
 		if (rx_status & RxTooLong) {
-			DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
+			pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
 			 	dev->name, rx_status);
 			/* A.C.: The chip hangs here. */
 		}
@@ -1866,7 +1853,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 			break;
 	}
 	if (tmp_work <= 0)
-		printk (KERN_WARNING PFX "rx stop wait too long\n");
+		pr_warning(PFX "rx stop wait too long\n");
 	/* restart receive */
 	tmp_work = 200;
 	while (--tmp_work > 0) {
@@ -1877,7 +1864,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 			break;
 	}
 	if (tmp_work <= 0)
-		printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
+		pr_warning(PFX "tx/rx enable wait too long\n");
 
 	/* and reinitialize all rx related registers */
 	RTL_W8_F (Cfg9346, Cfg9346_Unlock);
@@ -1888,7 +1875,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
 	RTL_W32 (RxConfig, tp->rx_config);
 	tp->cur_rx = 0;
 
-	DPRINTK("init buffer addresses\n");
+	pr_debug("init buffer addresses\n");
 
 	/* Lock Config[01234] and BMCR register writes */
 	RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1942,7 +1929,7 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 	unsigned int cur_rx = tp->cur_rx;
 	unsigned int rx_size = 0;
 
-	DPRINTK ("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+	pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
 		 " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
 		 RTL_R16 (RxBufAddr),
 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
@@ -1962,17 +1949,17 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 		pkt_size = rx_size - 4;
 
 		if (netif_msg_rx_status(tp))
-			printk(KERN_DEBUG "%s:  rtl8139_rx() status %4.4x, size %4.4x,"
+			pr_debug("%s:  rtl8139_rx() status %4.4x, size %4.4x,"
 				" cur %4.4x.\n", dev->name, rx_status,
 			 rx_size, cur_rx);
 #if RTL8139_DEBUG > 2
 		{
 			int i;
-			DPRINTK ("%s: Frame contents ", dev->name);
+			pr_debug("%s: Frame contents ", dev->name);
 			for (i = 0; i < 70; i++)
-				printk (" %2.2x",
+				pr_cont(" %2.2x",
 					rx_ring[ring_offset + i]);
-			printk (".\n");
+			pr_cont(".\n");
 		}
 #endif
 
@@ -1984,12 +1971,12 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
 			if (!tp->fifo_copy_timeout)
 				tp->fifo_copy_timeout = jiffies + 2;
 			else if (time_after(jiffies, tp->fifo_copy_timeout)) {
-				DPRINTK ("%s: hung FIFO. Reset.", dev->name);
+				pr_debug("%s: hung FIFO. Reset.", dev->name);
 				rx_size = 0;
 				goto no_early_rx;
 			}
 			if (netif_msg_intr(tp)) {
-				printk(KERN_DEBUG "%s: fifo copy in progress.",
+				pr_debug("%s: fifo copy in progress.",
 				       dev->name);
 			}
 			tp->xstats.early_rx++;
@@ -2033,8 +2020,7 @@ no_early_rx:
 			netif_receive_skb (skb);
 		} else {
 			if (net_ratelimit())
-				printk (KERN_WARNING
-					"%s: Memory squeeze, dropping packet.\n",
+				pr_warning("%s: Memory squeeze, dropping packet.\n",
 					dev->name);
 			dev->stats.rx_dropped++;
 		}
@@ -2049,12 +2035,10 @@ no_early_rx:
 	if (unlikely(!received || rx_size == 0xfff0))
 		rtl8139_isr_ack(tp);
 
-#if RTL8139_DEBUG > 1
-	DPRINTK ("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
+	pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
 		 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
 		 RTL_R16 (RxBufAddr),
 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
-#endif
 
 	tp->cur_rx = cur_rx;
 
@@ -2075,7 +2059,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
 				     void __iomem *ioaddr,
 				     int status, int link_changed)
 {
-	DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
+	pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
 		 dev->name, status);
 
 	assert (dev != NULL);
@@ -2104,7 +2088,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
 		pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
 		pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
 
-		printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
+		pr_err("%s: PCI Bus error %4.4x.\n",
 			dev->name, pci_cmd_status);
 	}
 }
@@ -2198,7 +2182,7 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
  out:
 	spin_unlock (&tp->lock);
 
-	DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
+	pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
 		 dev->name, RTL_R16 (IntrStatus));
 	return IRQ_RETVAL(handled);
 }
@@ -2249,7 +2233,7 @@ static int rtl8139_close (struct net_device *dev)
 	napi_disable(&tp->napi);
 
 	if (netif_msg_ifdown(tp))
-		printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
+		pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
 			dev->name, RTL_R16 (IntrStatus));
 
 	spin_lock_irqsave (&tp->lock, flags);
@@ -2292,11 +2276,11 @@ static int rtl8139_close (struct net_device *dev)
    other threads or interrupts aren't messing with the 8139.  */
 static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	void __iomem *ioaddr = np->mmio_addr;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
 
-	spin_lock_irq(&np->lock);
-	if (rtl_chip_info[np->chipset].flags & HasLWake) {
+	spin_lock_irq(&tp->lock);
+	if (rtl_chip_info[tp->chipset].flags & HasLWake) {
 		u8 cfg3 = RTL_R8 (Config3);
 		u8 cfg5 = RTL_R8 (Config5);
 
@@ -2317,7 +2301,7 @@ static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 		if (cfg5 & Cfg5_BWF)
 			wol->wolopts |= WAKE_BCAST;
 	}
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irq(&tp->lock);
 }
 
 
@@ -2326,19 +2310,19 @@ static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
    aren't messing with the 8139.  */
 static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	void __iomem *ioaddr = np->mmio_addr;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
 	u32 support;
 	u8 cfg3, cfg5;
 
-	support = ((rtl_chip_info[np->chipset].flags & HasLWake)
+	support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
 		   ? (WAKE_PHY | WAKE_MAGIC
 		      | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
 		   : 0);
 	if (wol->wolopts & ~support)
 		return -EINVAL;
 
-	spin_lock_irq(&np->lock);
+	spin_lock_irq(&tp->lock);
 	cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
 	if (wol->wolopts & WAKE_PHY)
 		cfg3 |= Cfg3_LinkUp;
@@ -2359,87 +2343,87 @@ static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & WAKE_BCAST)
 		cfg5 |= Cfg5_BWF;
 	RTL_W8 (Config5, cfg5);	/* need not unlock via Cfg9346 */
-	spin_unlock_irq(&np->lock);
+	spin_unlock_irq(&tp->lock);
 
 	return 0;
 }
 
 static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 	strcpy(info->driver, DRV_NAME);
 	strcpy(info->version, DRV_VERSION);
-	strcpy(info->bus_info, pci_name(np->pci_dev));
-	info->regdump_len = np->regs_len;
+	strcpy(info->bus_info, pci_name(tp->pci_dev));
+	info->regdump_len = tp->regs_len;
 }
 
 static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	spin_lock_irq(&np->lock);
-	mii_ethtool_gset(&np->mii, cmd);
-	spin_unlock_irq(&np->lock);
+	struct rtl8139_private *tp = netdev_priv(dev);
+	spin_lock_irq(&tp->lock);
+	mii_ethtool_gset(&tp->mii, cmd);
+	spin_unlock_irq(&tp->lock);
 	return 0;
 }
 
 static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 	int rc;
-	spin_lock_irq(&np->lock);
-	rc = mii_ethtool_sset(&np->mii, cmd);
-	spin_unlock_irq(&np->lock);
+	spin_lock_irq(&tp->lock);
+	rc = mii_ethtool_sset(&tp->mii, cmd);
+	spin_unlock_irq(&tp->lock);
 	return rc;
 }
 
 static int rtl8139_nway_reset(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	return mii_nway_restart(&np->mii);
+	struct rtl8139_private *tp = netdev_priv(dev);
+	return mii_nway_restart(&tp->mii);
 }
 
 static u32 rtl8139_get_link(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	return mii_link_ok(&np->mii);
+	struct rtl8139_private *tp = netdev_priv(dev);
+	return mii_link_ok(&tp->mii);
 }
 
 static u32 rtl8139_get_msglevel(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	return np->msg_enable;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	return tp->msg_enable;
 }
 
 static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
-	np->msg_enable = datum;
+	struct rtl8139_private *tp = netdev_priv(dev);
+	tp->msg_enable = datum;
 }
 
 static int rtl8139_get_regs_len(struct net_device *dev)
 {
-	struct rtl8139_private *np;
+	struct rtl8139_private *tp;
 	/* TODO: we are too slack to do reg dumping for pio, for now */
 	if (use_io)
 		return 0;
-	np = netdev_priv(dev);
-	return np->regs_len;
+	tp = netdev_priv(dev);
+	return tp->regs_len;
 }
 
 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
 {
-	struct rtl8139_private *np;
+	struct rtl8139_private *tp;
 
 	/* TODO: we are too slack to do reg dumping for pio, for now */
 	if (use_io)
 		return;
-	np = netdev_priv(dev);
+	tp = netdev_priv(dev);
 
 	regs->version = RTL_REGS_VER;
 
-	spin_lock_irq(&np->lock);
-	memcpy_fromio(regbuf, np->mmio_addr, regs->len);
-	spin_unlock_irq(&np->lock);
+	spin_lock_irq(&tp->lock);
+	memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+	spin_unlock_irq(&tp->lock);
 }
 
 static int rtl8139_get_sset_count(struct net_device *dev, int sset)
@@ -2454,12 +2438,12 @@ static int rtl8139_get_sset_count(struct net_device *dev, int sset)
 
 static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 
-	data[0] = np->xstats.early_rx;
-	data[1] = np->xstats.tx_buf_mapped;
-	data[2] = np->xstats.tx_timeouts;
-	data[3] = np->xstats.rx_lost_in_ring;
+	data[0] = tp->xstats.early_rx;
+	data[1] = tp->xstats.tx_buf_mapped;
+	data[2] = tp->xstats.tx_timeouts;
+	data[3] = tp->xstats.rx_lost_in_ring;
 }
 
 static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
@@ -2486,15 +2470,15 @@ static const struct ethtool_ops rtl8139_ethtool_ops = {
 
 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 	int rc;
 
 	if (!netif_running(dev))
 		return -EINVAL;
 
-	spin_lock_irq(&np->lock);
-	rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL);
-	spin_unlock_irq(&np->lock);
+	spin_lock_irq(&tp->lock);
+	rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+	spin_unlock_irq(&tp->lock);
 
 	return rc;
 }
@@ -2527,7 +2511,7 @@ static void __set_rx_mode (struct net_device *dev)
 	int i, rx_mode;
 	u32 tmp;
 
-	DPRINTK ("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
+	pr_debug("%s:   rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
 			dev->name, dev->flags, RTL_R32 (RxConfig));
 
 	/* Note: do not reorder, GCC is clever about common statements. */
@@ -2643,7 +2627,7 @@ static int __init rtl8139_init_module (void)
 	 * even if no 8139 board is found.
 	 */
 #ifdef MODULE
-	printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+	pr_info(RTL8139_DRIVER_NAME "\n");
 #endif
 
 	return pci_register_driver(&rtl8139_pci_driver);
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index cca94b9c08a..77547545509 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -122,13 +122,13 @@ static char version[] __initdata =
 #define ISCP_BUSY	0x00010000
 #define MACH_IS_APRICOT	0
 #else
-#define WSWAPrfd(x)     ((struct i596_rfd *)(x))
-#define WSWAPrbd(x)     ((struct i596_rbd *)(x))
-#define WSWAPiscp(x)    ((struct i596_iscp *)(x))
-#define WSWAPscb(x)     ((struct i596_scb *)(x))
-#define WSWAPcmd(x)     ((struct i596_cmd *)(x))
-#define WSWAPtbd(x)     ((struct i596_tbd *)(x))
-#define WSWAPchar(x)    ((char *)(x))
+#define WSWAPrfd(x)     ((struct i596_rfd *)((long)x))
+#define WSWAPrbd(x)     ((struct i596_rbd *)((long)x))
+#define WSWAPiscp(x)    ((struct i596_iscp *)((long)x))
+#define WSWAPscb(x)     ((struct i596_scb *)((long)x))
+#define WSWAPcmd(x)     ((struct i596_cmd *)((long)x))
+#define WSWAPtbd(x)     ((struct i596_tbd *)((long)x))
+#define WSWAPchar(x)    ((char *)((long)x))
 #define ISCP_BUSY	0x0001
 #define MACH_IS_APRICOT	1
 #endif
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index ec3e22e6306..21153dea8eb 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -74,14 +74,8 @@ EXPORT_SYMBOL(ei_netdev_ops);
 struct net_device *__alloc_ei_netdev(int size)
 {
 	struct net_device *dev = ____alloc_ei_netdev(size);
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	if (dev) {
-		dev->hard_start_xmit = ei_start_xmit;
-		dev->get_stats	= ei_get_stats;
-		dev->set_multicast_list = ei_set_multicast_list;
-		dev->tx_timeout = ei_tx_timeout;
-	}
-#endif
+	if (dev)
+		dev->netdev_ops = &ei_netdev_ops;
 	return dev;
 }
 EXPORT_SYMBOL(__alloc_ei_netdev);
diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c
index da863c91d1d..d225c291fd9 100644
--- a/drivers/net/8390p.c
+++ b/drivers/net/8390p.c
@@ -79,14 +79,8 @@ EXPORT_SYMBOL(eip_netdev_ops);
 struct net_device *__alloc_eip_netdev(int size)
 {
 	struct net_device *dev = ____alloc_ei_netdev(size);
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	if (dev) {
-		dev->hard_start_xmit = eip_start_xmit;
-		dev->get_stats	= eip_get_stats;
-		dev->set_multicast_list = eip_set_multicast_list;
-		dev->tx_timeout = eip_tx_timeout;
-	}
-#endif
+	if (dev)
+		dev->netdev_ops = &eip_netdev_ops;
 	return dev;
 }
 EXPORT_SYMBOL(__alloc_eip_netdev);
@@ -97,16 +91,15 @@ void NS8390p_init(struct net_device *dev, int startp)
 }
 EXPORT_SYMBOL(NS8390p_init);
 
-#if defined(MODULE)
-
-int init_module(void)
+static int __init NS8390p_init_module(void)
 {
 	return 0;
 }
 
-void cleanup_module(void)
+static void __exit NS8390p_cleanup_module(void)
 {
 }
 
-#endif /* MODULE */
+module_init(NS8390p_init_module);
+module_exit(NS8390p_cleanup_module);
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f3c4a3b910b..3b6383168c6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1,4 +1,3 @@
-
 #
 # Network device configuration
 #
@@ -26,15 +25,6 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
-config COMPAT_NET_DEV_OPS
-       default y
-       bool "Enable older network device API compatibility"
-       ---help---
-          This option enables kernel compatibility with older network devices
-          that do not use net_device_ops interface.
-
-	  If unsure, say Y.
-
 config IFB
 	tristate "Intermediate Functional Block support"
 	depends on NET_CLS_ACT
@@ -526,15 +516,16 @@ config STNIC
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
 	depends on SUPERH && \
-		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
-		 CPU_SUBTYPE_SH7619)
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
+		 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
+		 CPU_SUBTYPE_SH7724)
 	select CRC32
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB
 	help
 	  Renesas SuperH Ethernet device driver.
-	  This driver support SH7710, SH7712, SH7763 and SH7619.
+	  This driver support SH7710, SH7712, SH7763, SH7619, and SH7724.
 
 config SUNLANCE
 	tristate "Sun LANCE support"
@@ -927,6 +918,16 @@ config NET_NETX
 	  To compile this driver as a module, choose M here. The module
 	  will be called netx-eth.
 
+config TI_DAVINCI_EMAC
+	tristate "TI DaVinci EMAC Support"
+	depends on ARM && ARCH_DAVINCI
+	select PHYLIB
+	help
+	  This driver supports TI's DaVinci Ethernet .
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_emac_driver.  This is recommended.
+
 config DM9000
 	tristate "DM9000 support"
 	depends on ARM || BLACKFIN || MIPS
@@ -1000,7 +1001,7 @@ config SMC911X
 
 config SMSC911X
 	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
-	depends on ARM || SUPERH
+	depends on ARM || SUPERH || BLACKFIN
 	select CRC32
 	select MII
 	select PHYLIB
@@ -1722,6 +1723,11 @@ config TLAN
 
 	  Please email feedback to <torben.mathiasen@compaq.com>.
 
+config KS8842
+	tristate "Micrel KSZ8842"
+	help
+	  This platform driver is for Micrel KSZ8842 chip.
+
 config VIA_RHINE
 	tristate "VIA Rhine support"
 	depends on NET_PCI && PCI
@@ -1858,8 +1864,8 @@ config 68360_ENET
 	  the Motorola 68360 processor.
 
 config FEC
-	bool "FEC ethernet controller (of ColdFire CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27
+	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
+	depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire and Freescale i.MX processors.
@@ -1880,7 +1886,7 @@ config FEC_MPC52xx
 	---help---
 	  This option enables support for the MPC5200's on-chip
 	  Fast Ethernet Controller
-	  If compiled as module, it will be called 'fec_mpc52xx.ko'.
+	  If compiled as module, it will be called fec_mpc52xx.
 
 config FEC_MPC52xx_MDIO
 	bool "MPC52xx FEC MDIO bus driver"
@@ -1892,7 +1898,7 @@ config FEC_MPC52xx_MDIO
 	  (Motorola? industry standard).
 	  If your board uses an external PHY connected to FEC, enable this.
 	  If not sure, enable.
-	  If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+	  If compiled as module, it will be called fec_mpc52xx_phy.
 
 config NE_H8300
 	tristate "NE2000 compatible support for H8/300"
@@ -2200,7 +2206,7 @@ config SKGE_DEBUG
        depends on SKGE && DEBUG_FS
        help
 	 This option adds the ability to dump driver state for debugging.
-	 The file debugfs/skge/ethX displays the state of the internal
+	 The file /sys/kernel/debug/skge/ethX displays the state of the internal
 	 transmit and receive rings.
 
 	 If unsure, say N.
@@ -2226,7 +2232,7 @@ config SKY2_DEBUG
        depends on SKY2 && DEBUG_FS
        help
 	 This option adds the ability to dump driver state for debugging.
-	 The file debugfs/sky2/ethX displays the state of the internal
+	 The file /sys/kernel/debug/sky2/ethX displays the state of the internal
 	 transmit and receive rings.
 
 	 If unsure, say N.
@@ -2362,7 +2368,7 @@ config UGETH_TX_ON_DEMAND
 
 config MV643XX_ETH
 	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
+	depends on MV64X60 || PPC32 || PLAT_ORION
 	select INET_LRO
 	select PHYLIB
 	help
@@ -2373,6 +2379,14 @@ config MV643XX_ETH
 	  Some boards that use the Discovery chipset are the Momenco
 	  Ocelot C and Jaguar ATX and Pegasos II.
 
+config XILINX_LL_TEMAC
+	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+	select PHYLIB
+	depends on PPC_DCR_NATIVE
+	help
+	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
+	  core used in Xilinx Spartan and Virtex FPGAs
+
 config QLA3XXX
 	tristate "QLogic QLA3XXX Network Driver Support"
 	depends on PCI
@@ -2446,10 +2460,14 @@ menuconfig NETDEV_10000
 
 if NETDEV_10000
 
+config MDIO
+	tristate
+
 config CHELSIO_T1
         tristate "Chelsio 10Gb Ethernet support"
         depends on PCI
 	select CRC32
+	select MDIO
         help
           This driver supports Chelsio gigabit and 10-gigabit
           Ethernet cards. More information about adapter features and
@@ -2482,6 +2500,7 @@ config CHELSIO_T3
 	tristate "Chelsio Communications T3 10Gb Ethernet support"
 	depends on CHELSIO_T3_DEPENDS
 	select FW_LOADER
+	select MDIO
 	help
 	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
 	  adapters.
@@ -2517,6 +2536,7 @@ config ENIC
 config IXGBE
 	tristate "Intel(R) 10GbE PCI Express adapters support"
 	depends on PCI && INET
+	select MDIO
 	---help---
 	  This driver supports Intel(R) 10GbE PCI Express family of
 	  adapters.  For more information on how to identify your adapter, go
@@ -2679,6 +2699,7 @@ config TEHUTI
 config BNX2X
 	tristate "Broadcom NetXtremeII 10Gb support"
 	depends on PCI
+	select FW_LOADER
 	select ZLIB_INFLATE
 	select LIBCRC32C
 	help
@@ -2715,6 +2736,8 @@ source "drivers/net/wan/Kconfig"
 
 source "drivers/atm/Kconfig"
 
+source "drivers/ieee802154/Kconfig"
+
 source "drivers/s390/net/Kconfig"
 
 config XEN_NETDEV_FRONTEND
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index db30ebd7b26..d366fb2b40e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the Linux network (ethercard) device drivers.
 #
 
+obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
+
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_E1000E) += e1000e/
 obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
@@ -85,6 +87,7 @@ obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
 obj-$(CONFIG_SKFP) += skfp/
+obj-$(CONFIG_KS8842)	+= ks8842.o
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
@@ -96,6 +99,7 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
 #
 
 obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
 obj-$(CONFIG_PHYLIB) += phy/
 
 obj-$(CONFIG_SUNDANCE) += sundance.o
@@ -135,6 +139,8 @@ obj-$(CONFIG_AX88796) += ax88796.o
 
 obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
+obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
 obj-$(CONFIG_QLA3XXX) += qla3xxx.o
 obj-$(CONFIG_QLGE) += qlge/
 
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 02f64d57864..85a18175730 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -564,7 +564,7 @@ static int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
 
 	if (!TX_BUFFS_AVAIL){
 		local_irq_restore(flags);
-		return -1;
+		return NETDEV_TX_LOCKED;
 	}
 
 #ifdef DEBUG_DRIVER
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 57bc7152785..08419ee1029 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -2573,7 +2573,6 @@ restart:
 			netif_wake_queue(dev);
 	}
 
-	dev->trans_start = jiffies;
 	return NETDEV_TX_OK;
 
 overflow:
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index da64ba88d7f..78cea5e80b1 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -39,6 +39,7 @@
 static const char version[] = KERN_INFO "ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>\n";
 
 static struct ipddp_route *ipddp_route_list;
+static DEFINE_SPINLOCK(ipddp_route_lock);
 
 #ifdef CONFIG_IPDDP_ENCAP
 static int ipddp_mode = IPDDP_ENCAP;
@@ -50,7 +51,7 @@ static int ipddp_mode = IPDDP_DECAP;
 static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev);
 static int ipddp_create(struct ipddp_route *new_rt);
 static int ipddp_delete(struct ipddp_route *rt);
-static struct ipddp_route* ipddp_find_route(struct ipddp_route *rt);
+static struct ipddp_route* __ipddp_find_route(struct ipddp_route *rt);
 static int ipddp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 
 static const struct net_device_ops ipddp_netdev_ops = {
@@ -71,6 +72,7 @@ static struct net_device * __init ipddp_init(void)
 	if (!dev)
 		return ERR_PTR(-ENOMEM);
 
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 	strcpy(dev->name, "ipddp%d");
 
 	if (version_printed++ == 0)
@@ -113,11 +115,13 @@ static struct net_device * __init ipddp_init(void)
  */
 static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	__be32 paddr = ((struct rtable*)skb->dst)->rt_gateway;
+	__be32 paddr = skb_rtable(skb)->rt_gateway;
         struct ddpehdr *ddp;
         struct ipddp_route *rt;
         struct atalk_addr *our_addr;
 
+	spin_lock(&ipddp_route_lock);
+
 	/*
          * Find appropriate route to use, based only on IP number.
          */
@@ -126,8 +130,10 @@ static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev)
                 if(rt->ip == paddr)
                         break;
         }
-        if(rt == NULL)
+        if(rt == NULL) {
+		spin_unlock(&ipddp_route_lock);
                 return 0;
+	}
 
         our_addr = atalk_find_dev_addr(rt->dev);
 
@@ -173,6 +179,8 @@ static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev)
         if(aarp_send_ddp(rt->dev, skb, &rt->at, NULL) < 0)
                 dev_kfree_skb(skb);
 
+	spin_unlock(&ipddp_route_lock);
+
         return 0;
 }
 
@@ -195,7 +203,9 @@ static int ipddp_create(struct ipddp_route *new_rt)
                 return -ENETUNREACH;
         }
 
-	if (ipddp_find_route(rt)) {
+	spin_lock_bh(&ipddp_route_lock);
+	if (__ipddp_find_route(rt)) {
+		spin_unlock_bh(&ipddp_route_lock);
 		kfree(rt);
 		return -EEXIST;
 	}
@@ -203,6 +213,8 @@ static int ipddp_create(struct ipddp_route *new_rt)
         rt->next = ipddp_route_list;
         ipddp_route_list = rt;
 
+	spin_unlock_bh(&ipddp_route_lock);
+
         return 0;
 }
 
@@ -215,6 +227,7 @@ static int ipddp_delete(struct ipddp_route *rt)
         struct ipddp_route **r = &ipddp_route_list;
         struct ipddp_route *tmp;
 
+	spin_lock_bh(&ipddp_route_lock);
         while((tmp = *r) != NULL)
         {
                 if(tmp->ip == rt->ip
@@ -222,19 +235,21 @@ static int ipddp_delete(struct ipddp_route *rt)
                         && tmp->at.s_node == rt->at.s_node)
                 {
                         *r = tmp->next;
+			spin_unlock_bh(&ipddp_route_lock);
                         kfree(tmp);
                         return 0;
                 }
                 r = &tmp->next;
         }
 
+	spin_unlock_bh(&ipddp_route_lock);
         return (-ENOENT);
 }
 
 /*
  * Find a routing entry, we only return a FULL match
  */
-static struct ipddp_route* ipddp_find_route(struct ipddp_route *rt)
+static struct ipddp_route* __ipddp_find_route(struct ipddp_route *rt)
 {
         struct ipddp_route *f;
 
@@ -252,7 +267,7 @@ static struct ipddp_route* ipddp_find_route(struct ipddp_route *rt)
 static int ipddp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
         struct ipddp_route __user *rt = ifr->ifr_data;
-        struct ipddp_route rcp;
+        struct ipddp_route rcp, rcp2, *rp;
 
         if(!capable(CAP_NET_ADMIN))
                 return -EPERM;
@@ -266,9 +281,19 @@ static int ipddp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
                         return (ipddp_create(&rcp));
 
                 case SIOCFINDIPDDPRT:
-                        if(copy_to_user(rt, ipddp_find_route(&rcp), sizeof(struct ipddp_route)))
-                                return -EFAULT;
-                        return 0;
+			spin_lock_bh(&ipddp_route_lock);
+			rp = __ipddp_find_route(&rcp);
+			if (rp)
+				memcpy(&rcp2, rp, sizeof(rcp2));
+			spin_unlock_bh(&ipddp_route_lock);
+
+			if (rp) {
+				if (copy_to_user(rt, &rcp2,
+						 sizeof(struct ipddp_route)))
+					return -EFAULT;
+				return 0;
+			} else
+				return -ENOENT;
 
                 case SIOCDELIPDDPRT:
                         return (ipddp_delete(&rcp));
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 78cc7146913..b642647170b 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1220,7 +1220,7 @@ static int __init ltpc_setup(char *str)
 		if (ints[0] > 2) {
 			dma = ints[3];
 		}
-		/* ignore any other paramters */
+		/* ignore any other parameters */
 	}
 	return 1;
 }
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 7f4bc8ae546..2e7419a6119 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -829,7 +829,7 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev->trans_start = jiffies;
 	} else {
 		printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
-		return 1;	/* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
+		return NETDEV_TX_BUSY;	/* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
 				on this skb, he also reports -ENETDOWN and printk's, so either
 				we free and return(0) or don't free and return 1 */
 	}
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index b72b3d639f6..fbf4645417d 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -253,7 +253,7 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
 		skb = dev_alloc_skb(length + 2);
 		if (likely(skb != NULL)) {
 			skb_reserve(skb, 2);
-			dma_sync_single(NULL, ep->descs->rdesc[entry].buf_addr,
+			dma_sync_single_for_cpu(NULL, ep->descs->rdesc[entry].buf_addr,
 						length, DMA_FROM_DEVICE);
 			skb_copy_to_linear_data(skb, ep->rx_buf[entry], length);
 			skb_put(skb, length);
@@ -331,7 +331,7 @@ static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev)
 	ep->descs->tdesc[entry].tdesc1 =
 		TDESC1_EOF | (entry << 16) | (skb->len & 0xfff);
 	skb_copy_and_csum_dev(skb, ep->tx_buf[entry]);
-	dma_sync_single(NULL, ep->descs->tdesc[entry].buf_addr,
+	dma_sync_single_for_cpu(NULL, ep->descs->tdesc[entry].buf_addr,
 				skb->len, DMA_TO_DEVICE);
 	dev_kfree_skb(skb);
 
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index ec8a1ae1e88..455037134aa 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -526,7 +526,7 @@ ether3_sendpacket(struct sk_buff *skb, struct net_device *dev)
 
 	if (priv(dev)->tx_tail == next_ptr) {
 		local_irq_restore(flags);
-		return 1;	/* unable to queue */
+		return NETDEV_TX_BUSY;	/* unable to queue */
 	}
 
 	dev->trans_start = jiffies;
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index a740053d3af..6f42ad72891 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -456,7 +456,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
-	BUG_ON(qmgr_stat_overflow(queue));
+	/* Don't check for queue overflow here, we've allocated sufficient
+	   length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -512,8 +513,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
 #endif
 			napi_complete(napi);
 			qmgr_enable_irq(rxq);
-			if (!qmgr_stat_empty(rxq) &&
-			    napi_reschedule(napi)) {
+			if (!qmgr_stat_below_low_watermark(rxq) &&
+			    napi_reschedule(napi)) { /* not empty again */
 #if DEBUG_RX
 				printk(KERN_DEBUG "%s: eth_poll"
 				       " napi_reschedule successed\n",
@@ -561,8 +562,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
 		dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
 				 RX_BUFF_SIZE, DMA_FROM_DEVICE);
 #else
-		dma_sync_single(&dev->dev, desc->data - NET_IP_ALIGN,
-				RX_BUFF_SIZE, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN,
+					RX_BUFF_SIZE, DMA_FROM_DEVICE);
 		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
 			      ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
 #endif
@@ -630,9 +631,9 @@ static void eth_txdone_irq(void *unused)
 			port->tx_buff_tab[n_desc] = NULL;
 		}
 
-		start = qmgr_stat_empty(port->plat->txreadyq);
+		start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 		queue_put_desc(port->plat->txreadyq, phys, desc);
-		if (start) {
+		if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
 			       port->netdev->name);
@@ -708,13 +709,14 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
 	dev->trans_start = jiffies;
 
-	if (qmgr_stat_empty(txreadyq)) {
+	if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
 		printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
 #endif
 		netif_stop_queue(dev);
 		/* we could miss TX ready interrupt */
-		if (!qmgr_stat_empty(txreadyq)) {
+		/* really empty in fact */
+		if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: eth_xmit ready again\n",
 			       dev->name);
@@ -814,29 +816,29 @@ static int request_queues(struct port *port)
 	int err;
 
 	err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
-			    "%s:RX-free", port->netdev->name);
+				 "%s:RX-free", port->netdev->name);
 	if (err)
 		return err;
 
 	err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
-			    "%s:RX", port->netdev->name);
+				 "%s:RX", port->netdev->name);
 	if (err)
 		goto rel_rxfree;
 
 	err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
-			    "%s:TX", port->netdev->name);
+				 "%s:TX", port->netdev->name);
 	if (err)
 		goto rel_rx;
 
 	err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
-			    "%s:TX-ready", port->netdev->name);
+				 "%s:TX-ready", port->netdev->name);
 	if (err)
 		goto rel_tx;
 
 	/* TX-done queue handles skbs sent out by the NPEs */
 	if (!ports_open) {
 		err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
-				    "%s:TX-done", DRV_NAME);
+					 "%s:TX-done", DRV_NAME);
 		if (err)
 			goto rel_txready;
 	}
@@ -1149,7 +1151,7 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 	struct net_device *dev;
 	struct eth_plat_info *plat = pdev->dev.platform_data;
 	u32 regs_phys;
-	char phy_id[BUS_ID_SIZE];
+	char phy_id[MII_BUS_ID_SIZE + 3];
 	int err;
 
 	if (!(dev = alloc_etherdev(sizeof(struct port))))
@@ -1207,7 +1209,7 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
 	udelay(50);
 
-	snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy);
+	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
 	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
 				   PHY_INTERFACE_MODE_MII);
 	if ((err = IS_ERR(port->phydev)))
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index 45c5b7332cd..e4afbd628c2 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -271,7 +271,7 @@ static int atl1c_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct atl1c_adapter *adapter = netdev_priv(netdev);
 
 	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
-			    WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+			    WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
 		return -EOPNOTSUPP;
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 83a12125b94..cd547a205fb 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -164,6 +164,24 @@ static inline void atl1c_irq_reset(struct atl1c_adapter *adapter)
 }
 
 /*
+ * atl1c_wait_until_idle - wait up to AT_HW_MAX_IDLE_DELAY reads
+ * of the idle status register until the device is actually idle
+ */
+static u32 atl1c_wait_until_idle(struct atl1c_hw *hw)
+{
+	int timeout;
+	u32 data;
+
+	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+		AT_READ_REG(hw, REG_IDLE_STATUS, &data);
+		if ((data & IDLE_STATUS_MASK) == 0)
+			return 0;
+		msleep(1);
+	}
+	return data;
+}
+
+/*
  * atl1c_phy_config - Timer Call-back
  * @data: pointer to netdev cast into an unsigned long
  */
@@ -220,11 +238,11 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
 		/* link down */
 		if (netif_carrier_ok(netdev)) {
 			hw->hibernate = true;
-			atl1c_set_aspm(hw, false);
 			if (atl1c_stop_mac(hw) != 0)
 				if (netif_msg_hw(adapter))
 					dev_warn(&pdev->dev,
 						"stop mac failed\n");
+			atl1c_set_aspm(hw, false);
 		}
 		netif_carrier_off(netdev);
 	} else {
@@ -240,10 +258,10 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
 		    adapter->link_duplex != duplex) {
 			adapter->link_speed  = speed;
 			adapter->link_duplex = duplex;
+			atl1c_set_aspm(hw, true);
 			atl1c_enable_tx_ctrl(hw);
 			atl1c_enable_rx_ctrl(hw);
 			atl1c_setup_mac_ctrl(adapter);
-			atl1c_set_aspm(hw, true);
 			if (netif_msg_link(adapter))
 				dev_info(&pdev->dev,
 					"%s: %s NIC Link is Up<%d Mbps %s>\n",
@@ -1106,7 +1124,6 @@ static void atl1c_configure_dma(struct atl1c_adapter *adapter)
 static int atl1c_stop_mac(struct atl1c_hw *hw)
 {
 	u32 data;
-	int timeout;
 
 	AT_READ_REG(hw, REG_RXQ_CTRL, &data);
 	data &= ~(RXQ1_CTRL_EN | RXQ2_CTRL_EN |
@@ -1117,25 +1134,13 @@ static int atl1c_stop_mac(struct atl1c_hw *hw)
 	data &= ~TXQ_CTRL_EN;
 	AT_WRITE_REG(hw, REG_TWSI_CTRL, data);
 
-	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-		AT_READ_REG(hw, REG_IDLE_STATUS, &data);
-		if ((data & (IDLE_STATUS_RXQ_NO_IDLE |
-			IDLE_STATUS_TXQ_NO_IDLE)) == 0)
-			break;
-		msleep(1);
-	}
+	atl1c_wait_until_idle(hw);
 
 	AT_READ_REG(hw, REG_MAC_CTRL, &data);
 	data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN);
 	AT_WRITE_REG(hw, REG_MAC_CTRL, data);
 
-	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-		AT_READ_REG(hw, REG_IDLE_STATUS, &data);
-		if ((data & IDLE_STATUS_MASK) == 0)
-			return 0;
-		msleep(1);
-	}
-	return data;
+	return (int)atl1c_wait_until_idle(hw);
 }
 
 static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw)
@@ -1178,8 +1183,6 @@ static int atl1c_reset_mac(struct atl1c_hw *hw)
 {
 	struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
 	struct pci_dev *pdev = adapter->pdev;
-	u32 idle_status_data = 0;
-	int timeout = 0;
 	int ret;
 
 	AT_WRITE_REG(hw, REG_IMR, 0);
@@ -1198,15 +1201,10 @@ static int atl1c_reset_mac(struct atl1c_hw *hw)
 	AT_WRITE_FLUSH(hw);
 	msleep(10);
 	/* Wait at least 10ms for All module to be Idle */
-	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
-		AT_READ_REG(hw, REG_IDLE_STATUS, &idle_status_data);
-		if ((idle_status_data & IDLE_STATUS_MASK) == 0)
-			break;
-		msleep(1);
-	}
-	if (timeout >= AT_HW_MAX_IDLE_DELAY) {
+
+	if (atl1c_wait_until_idle(hw)) {
 		dev_err(&pdev->dev,
-			"MAC state machine cann't be idle since"
+			"MAC state machine can't be idle since"
 			" disabled for 10ms second\n");
 		return -1;
 	}
@@ -1242,9 +1240,7 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
 
 	AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
 
-	pm_ctrl_data &= PM_CTRL_SERDES_PD_EX_L1;
-	pm_ctrl_data |= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
-	pm_ctrl_data |= ~PM_CTRL_SERDES_L1_EN;
+	pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1;
 	pm_ctrl_data &=  ~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
 			PM_CTRL_L1_ENTRY_TIMER_SHIFT);
 
@@ -1254,19 +1250,11 @@ static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
 		pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
 		pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
 
-		if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) {
-			pm_ctrl_data |= AT_ASPM_L1_TIMER <<
-				PM_CTRL_L1_ENTRY_TIMER_SHIFT;
-			pm_ctrl_data |= PM_CTRL_ASPM_L1_EN;
-		} else
-			pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
-
-		if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT)
-			pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN;
-		else
-			pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
-
+		pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN;
+		pm_ctrl_data |= PM_CTRL_SERDES_L1_EN;
 	} else {
+		pm_ctrl_data &= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
+		pm_ctrl_data &= ~PM_CTRL_SERDES_L1_EN;
 		pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
 		pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN;
 
@@ -2123,7 +2111,6 @@ static int atl1c_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	atl1c_tx_map(adapter, skb, tpd, type);
 	atl1c_tx_queue(adapter, skb, tpd, type);
 
-	netdev->trans_start = jiffies;
 	spin_unlock_irqrestore(&adapter->tx_lock, flags);
 	return NETDEV_TX_OK;
 }
diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h
index 2bf63b4368e..ba48220df16 100644
--- a/drivers/net/atl1e/atl1e.h
+++ b/drivers/net/atl1e/atl1e.h
@@ -429,7 +429,6 @@ struct atl1e_adapter {
 	struct mii_if_info  mii;    /* MII interface info */
 	struct atl1e_hw        hw;
 	struct atl1e_hw_stats  hw_stats;
-	struct net_device_stats net_stats;
 
 	bool have_msi;
 	u32 wol;
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 1342418fb20..9fc6d6d9060 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -1154,7 +1154,7 @@ static struct net_device_stats *atl1e_get_stats(struct net_device *netdev)
 {
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
 	struct atl1e_hw_stats  *hw_stats = &adapter->hw_stats;
-	struct net_device_stats *net_stats = &adapter->net_stats;
+	struct net_device_stats *net_stats = &netdev->stats;
 
 	net_stats->rx_packets = hw_stats->rx_ok;
 	net_stats->tx_packets = hw_stats->tx_ok;
@@ -1182,7 +1182,7 @@ static struct net_device_stats *atl1e_get_stats(struct net_device *netdev)
 	net_stats->tx_aborted_errors = hw_stats->tx_abort_col;
 	net_stats->tx_window_errors  = hw_stats->tx_late_col;
 
-	return &adapter->net_stats;
+	return net_stats;
 }
 
 static void atl1e_update_hw_stats(struct atl1e_adapter *adapter)
@@ -1310,7 +1310,7 @@ static irqreturn_t atl1e_intr(int irq, void *data)
 
 		/* link event */
 		if (status & (ISR_GPHY | ISR_MANUAL)) {
-			adapter->net_stats.tx_carrier_errors++;
+			netdev->stats.tx_carrier_errors++;
 			atl1e_link_chg_event(adapter);
 			break;
 		}
@@ -1602,7 +1602,7 @@ static u16 atl1e_cal_tdp_req(const struct sk_buff *skb)
 	}
 
 	if (skb_is_gso(skb)) {
-		if (skb->protocol == ntohs(ETH_P_IP) ||
+		if (skb->protocol == htons(ETH_P_IP) ||
 		   (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6)) {
 			proto_hdr_len = skb_transport_offset(skb) +
 					tcp_hdrlen(skb);
@@ -1795,8 +1795,7 @@ static void atl1e_tx_map(struct atl1e_adapter *adapter,
 			memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc));
 
 			tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
-			if (tx_buffer->skb)
-				BUG();
+			BUG_ON(tx_buffer->skb);
 
 			tx_buffer->skb = NULL;
 			tx_buffer->length =
@@ -1879,7 +1878,7 @@ static int atl1e_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 				TPD_VLAN_SHIFT;
 	}
 
-	if (skb->protocol == ntohs(ETH_P_8021Q))
+	if (skb->protocol == htons(ETH_P_8021Q))
 		tpd->word3 |= 1 << TPD_VL_TAGGED_SHIFT;
 
 	if (skb_network_offset(skb) != ETH_HLEN)
@@ -1895,7 +1894,7 @@ static int atl1e_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	atl1e_tx_map(adapter, skb, tpd);
 	atl1e_tx_queue(adapter, tpd_req, tpd);
 
-	netdev->trans_start = jiffies;
+	netdev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
 	spin_unlock_irqrestore(&adapter->tx_lock, flags);
 	return NETDEV_TX_OK;
 }
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 4e817126e28..94d7325caf4 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2213,8 +2213,7 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	next_to_use = atomic_read(&tpd_ring->next_to_use);
 	buffer_info = &tpd_ring->buffer_info[next_to_use];
-	if (unlikely(buffer_info->skb))
-		BUG();
+	BUG_ON(buffer_info->skb);
 	/* put skb in last TPD */
 	buffer_info->skb = NULL;
 
@@ -2280,8 +2279,8 @@ static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
 			ATL1_MAX_TX_BUF_LEN;
 		for (i = 0; i < nseg; i++) {
 			buffer_info = &tpd_ring->buffer_info[next_to_use];
-			if (unlikely(buffer_info->skb))
-				BUG();
+			BUG_ON(buffer_info->skb);
+
 			buffer_info->skb = NULL;
 			buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
 				ATL1_MAX_TX_BUF_LEN : buf_len;
@@ -2383,7 +2382,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	mss = skb_shinfo(skb)->gso_size;
 	if (mss) {
-		if (skb->protocol == ntohs(ETH_P_IP)) {
+		if (skb->protocol == htons(ETH_P_IP)) {
 			proto_hdr_len = (skb_transport_offset(skb) +
 					 tcp_hdrlen(skb));
 			if (unlikely(proto_hdr_len > len)) {
@@ -2438,7 +2437,6 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	atl1_tx_queue(adapter, count, ptpd);
 	atl1_update_mailbox(adapter);
 	mmiowb();
-	netdev->trans_start = jiffies;
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index d58c105fc77..d3c734f4d67 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -957,7 +957,7 @@ static int au1000_tx(struct sk_buff *skb, struct net_device *dev)
 		/* We've wrapped around and the transmitter is still busy */
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	else if (buff_stat & TX_T_DONE) {
 		update_tx_stats(dev, ptxd->status);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index b70b81ec34c..36d4d377ec2 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -782,7 +782,7 @@ static int b44_rx(struct b44 *bp, int budget)
 		drop_it:
 			b44_recycle_rx(bp, cons, bp->rx_prod);
 		drop_it_no_recycle:
-			bp->stats.rx_dropped++;
+			bp->dev->stats.rx_dropped++;
 			goto next_pkt;
 		}
 
@@ -1647,7 +1647,7 @@ static int b44_close(struct net_device *dev)
 static struct net_device_stats *b44_get_stats(struct net_device *dev)
 {
 	struct b44 *bp = netdev_priv(dev);
-	struct net_device_stats *nstat = &bp->stats;
+	struct net_device_stats *nstat = &dev->stats;
 	struct b44_hw_stats *hwstat = &bp->hw_stats;
 
 	/* Convert HW stats into netdevice stats. */
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index e678498de6d..e1905a49279 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -97,7 +97,7 @@
 #define B44_DMARX_STAT	0x021CUL /* DMA RX Current Active Desc. + Status */
 #define  DMARX_STAT_CDMASK	0x00000fff /* Current Descriptor Mask */
 #define  DMARX_STAT_SMASK	0x0000f000 /* State Mask */
-#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disbaled */
+#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disabled */
 #define  DMARX_STAT_SACTIVE	0x00001000 /* State Active */
 #define  DMARX_STAT_SIDLE	0x00002000 /* State Idle Wait */
 #define  DMARX_STAT_SSTOPPED	0x00003000 /* State Stopped */
@@ -384,7 +384,6 @@ struct b44 {
 
 	struct timer_list	timer;
 
-	struct net_device_stats	stats;
 	struct b44_hw_stats	hw_stats;
 
 	struct ssb_device	*sdev;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 5c378b5e8e4..66bb56874d9 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -168,6 +168,7 @@ static void netdev_stats_update(struct be_adapter *adapter)
 	struct be_port_rxf_stats *port_stats =
 			&rxf_stats->port[adapter->port_num];
 	struct net_device_stats *dev_stats = &adapter->stats.net_stats;
+	struct be_erx_stats *erx_stats = &hw_stats->erx;
 
 	dev_stats->rx_packets = port_stats->rx_total_frames;
 	dev_stats->tx_packets = port_stats->tx_unicastframes +
@@ -181,29 +182,33 @@ static void netdev_stats_update(struct be_adapter *adapter)
 	dev_stats->rx_errors = port_stats->rx_crc_errors +
 		port_stats->rx_alignment_symbol_errors +
 		port_stats->rx_in_range_errors +
-		port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
-
-	/*  packet transmit problems */
-	dev_stats->tx_errors = 0;
-
-	/*  no space in linux buffers */
-	dev_stats->rx_dropped = 0;
-
-	/* no space available in linux */
-	dev_stats->tx_dropped = 0;
-
-	dev_stats->multicast = port_stats->tx_multicastframes;
-	dev_stats->collisions = 0;
+		port_stats->rx_out_range_errors +
+		port_stats->rx_frame_too_long +
+		port_stats->rx_dropped_too_small +
+		port_stats->rx_dropped_too_short +
+		port_stats->rx_dropped_header_too_small +
+		port_stats->rx_dropped_tcp_length +
+		port_stats->rx_dropped_runt +
+		port_stats->rx_tcp_checksum_errs +
+		port_stats->rx_ip_checksum_errs +
+		port_stats->rx_udp_checksum_errs;
+
+	/*  no space in linux buffers: best possible approximation */
+	dev_stats->rx_dropped = erx_stats->rx_drops_no_fragments[0];
 
 	/* detailed rx errors */
 	dev_stats->rx_length_errors = port_stats->rx_in_range_errors +
-		port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
+		port_stats->rx_out_range_errors +
+		port_stats->rx_frame_too_long;
+
 	/* receive ring buffer overflow */
 	dev_stats->rx_over_errors = 0;
+
 	dev_stats->rx_crc_errors = port_stats->rx_crc_errors;
 
 	/* frame alignment errors */
 	dev_stats->rx_frame_errors = port_stats->rx_alignment_symbol_errors;
+
 	/* receiver fifo overrun */
 	/* drops_no_pbuf is no per i/f, it's per BE card */
 	dev_stats->rx_fifo_errors = port_stats->rx_fifo_overflow +
@@ -211,6 +216,16 @@ static void netdev_stats_update(struct be_adapter *adapter)
 					rxf_stats->rx_drops_no_pbuf;
 	/* receiver missed packetd */
 	dev_stats->rx_missed_errors = 0;
+
+	/*  packet transmit problems */
+	dev_stats->tx_errors = 0;
+
+	/* no space available in linux */
+	dev_stats->tx_dropped = 0;
+
+	dev_stats->multicast = port_stats->tx_multicastframes;
+	dev_stats->collisions = 0;
+
 	/* detailed tx_errors */
 	dev_stats->tx_aborted_errors = 0;
 	dev_stats->tx_carrier_errors = 0;
@@ -337,13 +352,10 @@ static void be_tx_stats_update(struct be_adapter *adapter,
 /* Determine number of WRB entries needed to xmit data in an skb */
 static u32 wrb_cnt_for_skb(struct sk_buff *skb, bool *dummy)
 {
-	int cnt = 0;
-	while (skb) {
-		if (skb->len > skb->data_len)
-			cnt++;
-		cnt += skb_shinfo(skb)->nr_frags;
-		skb = skb_shinfo(skb)->frag_list;
-	}
+	int cnt = (skb->len > skb->data_len);
+
+	cnt += skb_shinfo(skb)->nr_frags;
+
 	/* to account for hdr wrb */
 	cnt++;
 	if (cnt & 1) {
@@ -409,31 +421,28 @@ static int make_tx_wrbs(struct be_adapter *adapter,
 	hdr = queue_head_node(txq);
 	queue_head_inc(txq);
 
-	while (skb) {
-		if (skb->len > skb->data_len) {
-			int len = skb->len - skb->data_len;
-			busaddr = pci_map_single(pdev, skb->data, len,
-					PCI_DMA_TODEVICE);
-			wrb = queue_head_node(txq);
-			wrb_fill(wrb, busaddr, len);
-			be_dws_cpu_to_le(wrb, sizeof(*wrb));
-			queue_head_inc(txq);
-			copied += len;
-		}
+	if (skb->len > skb->data_len) {
+		int len = skb->len - skb->data_len;
+		busaddr = pci_map_single(pdev, skb->data, len,
+					 PCI_DMA_TODEVICE);
+		wrb = queue_head_node(txq);
+		wrb_fill(wrb, busaddr, len);
+		be_dws_cpu_to_le(wrb, sizeof(*wrb));
+		queue_head_inc(txq);
+		copied += len;
+	}
 
-		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-			struct skb_frag_struct *frag =
-				&skb_shinfo(skb)->frags[i];
-			busaddr = pci_map_page(pdev, frag->page,
-					frag->page_offset,
-					frag->size, PCI_DMA_TODEVICE);
-			wrb = queue_head_node(txq);
-			wrb_fill(wrb, busaddr, frag->size);
-			be_dws_cpu_to_le(wrb, sizeof(*wrb));
-			queue_head_inc(txq);
-			copied += frag->size;
-		}
-		skb = skb_shinfo(skb)->frag_list;
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		struct skb_frag_struct *frag =
+			&skb_shinfo(skb)->frags[i];
+		busaddr = pci_map_page(pdev, frag->page,
+				       frag->page_offset,
+				       frag->size, PCI_DMA_TODEVICE);
+		wrb = queue_head_node(txq);
+		wrb_fill(wrb, busaddr, frag->size);
+		be_dws_cpu_to_le(wrb, sizeof(*wrb));
+		queue_head_inc(txq);
+		copied += frag->size;
 	}
 
 	if (dummy_wrb) {
@@ -478,8 +487,6 @@ static int be_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 	be_txq_notify(&adapter->ctrl, txq->id, wrb_cnt);
 
-	netdev->trans_start = jiffies;
-
 	be_tx_stats_update(adapter, wrb_cnt, copied, stopped);
 	return NETDEV_TX_OK;
 }
@@ -637,6 +644,22 @@ static void be_rx_stats_update(struct be_adapter *adapter,
 	stats->be_rx_bytes += pktsize;
 }
 
+static inline bool do_pkt_csum(struct be_eth_rx_compl *rxcp, bool cso)
+{
+	u8 l4_cksm, ip_version, ipcksm, tcpf = 0, udpf = 0, ipv6_chk;
+
+	l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
+	ipcksm = AMAP_GET_BITS(struct amap_eth_rx_compl, ipcksm, rxcp);
+	ip_version = AMAP_GET_BITS(struct amap_eth_rx_compl, ip_version, rxcp);
+	if (ip_version) {
+		tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
+		udpf = AMAP_GET_BITS(struct amap_eth_rx_compl, udpf, rxcp);
+	}
+	ipv6_chk = (ip_version && (tcpf || udpf));
+
+	return ((l4_cksm && ipv6_chk && ipcksm) && cso) ? false : true;
+}
+
 static struct be_rx_page_info *
 get_rx_page_info(struct be_adapter *adapter, u16 frag_idx)
 {
@@ -720,7 +743,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 
 	if (pktsize <= rx_frag_size) {
 		BUG_ON(num_rcvd != 1);
-		return;
+		goto done;
 	}
 
 	/* More frags present for this completion */
@@ -742,6 +765,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 		memset(page_info, 0, sizeof(*page_info));
 	}
 
+done:
 	be_rx_stats_update(adapter, pktsize, num_rcvd);
 	return;
 }
@@ -752,9 +776,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 {
 	struct sk_buff *skb;
 	u32 vtp, vid;
-	int l4_cksm;
 
-	l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
 	vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
 
 	skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
@@ -769,10 +791,10 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 
 	skb_fill_rx_data(adapter, skb, rxcp);
 
-	if (l4_cksm && adapter->rx_csum)
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-	else
+	if (do_pkt_csum(rxcp, adapter->rx_csum))
 		skb->ip_summed = CHECKSUM_NONE;
+	else
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	skb->truesize = skb->len + sizeof(struct sk_buff);
 	skb->protocol = eth_type_trans(skb, adapter->netdev);
@@ -854,12 +876,19 @@ static struct be_eth_rx_compl *be_rx_compl_get(struct be_adapter *adapter)
 
 	be_dws_le_to_cpu(rxcp, sizeof(*rxcp));
 
-	rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] = 0;
-
 	queue_tail_inc(&adapter->rx_obj.cq);
 	return rxcp;
 }
 
+/* To reset the valid bit, we need to reset the whole word as
+ * when walking the queue the valid entries are little-endian
+ * and invalid entries are host endian
+ */
+static inline void be_rx_compl_reset(struct be_eth_rx_compl *rxcp)
+{
+	rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] = 0;
+}
+
 static inline struct page *be_alloc_pages(u32 size)
 {
 	gfp_t alloc_flags = GFP_ATOMIC;
@@ -991,6 +1020,7 @@ static void be_rx_q_clean(struct be_adapter *adapter)
 	/* First cleanup pending rx completions */
 	while ((rxcp = be_rx_compl_get(adapter)) != NULL) {
 		be_rx_compl_discard(adapter, rxcp);
+		be_rx_compl_reset(rxcp);
 		be_cq_notify(&adapter->ctrl, rx_cq->id, true, 1);
 	}
 
@@ -1026,8 +1056,13 @@ static void be_tx_queues_destroy(struct be_adapter *adapter)
 	struct be_queue_info *q;
 
 	q = &adapter->tx_obj.q;
-	if (q->created)
+	if (q->created) {
 		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_TXQ);
+
+		/* No more tx completions can be rcvd now; clean up if there
+		 * are any pending completions or pending tx requests */
+		be_tx_q_clean(adapter);
+	}
 	be_queue_free(adapter, q);
 
 	q = &adapter->tx_obj.cq;
@@ -1035,10 +1070,6 @@ static void be_tx_queues_destroy(struct be_adapter *adapter)
 		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
 	be_queue_free(adapter, q);
 
-	/* No more tx completions can be rcvd now; clean up if there are
-	 * any pending completions or pending tx requests */
-	be_tx_q_clean(adapter);
-
 	q = &adapter->tx_eq.q;
 	if (q->created)
 		be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
@@ -1272,6 +1303,8 @@ int be_poll_rx(struct napi_struct *napi, int budget)
 			be_rx_compl_process_lro(adapter, rxcp);
 		else
 			be_rx_compl_process(adapter, rxcp);
+
+		be_rx_compl_reset(rxcp);
 	}
 
 	lro_flush_all(&adapter->rx_obj.lro_mgr);
@@ -1527,7 +1560,7 @@ static int be_close(struct net_device *netdev)
 	struct be_eq_obj *tx_eq = &adapter->tx_eq;
 	int vec;
 
-	cancel_delayed_work(&adapter->work);
+	cancel_delayed_work_sync(&adapter->work);
 
 	netif_stop_queue(netdev);
 	netif_carrier_off(netdev);
@@ -1626,10 +1659,12 @@ static void be_netdev_init(struct net_device *netdev)
 
 	netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
 		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM |
-		NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+		NETIF_F_IPV6_CSUM;
 
 	netdev->flags |= IFF_MULTICAST;
 
+	adapter->rx_csum = true;
+
 	BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
 
 	SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index b4da1821332..c15fc281f79 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -194,13 +194,13 @@ static int desc_list_init(void)
 		struct dma_descriptor *b = &(r->desc_b);
 
 		/* allocate a new skb for next time receive */
-		new_skb = dev_alloc_skb(PKT_BUF_SZ + 2);
+		new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 		if (!new_skb) {
 			printk(KERN_NOTICE DRV_NAME
 			       ": init: low on mem - packet dropped\n");
 			goto init_error;
 		}
-		skb_reserve(new_skb, 2);
+		skb_reserve(new_skb, NET_IP_ALIGN);
 		r->skb = new_skb;
 
 		/*
@@ -566,9 +566,9 @@ static void adjust_tx_list(void)
 	 */
 	if (current_tx_ptr->next->next == tx_list_head) {
 		while (tx_list_head->status.status_word == 0) {
-			mdelay(1);
+			udelay(10);
 			if (tx_list_head->status.status_word != 0
-			    || !(bfin_read_DMA2_IRQ_STATUS() & 0x08)) {
+			    || !(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)) {
 				goto adjust_head;
 			}
 			if (timeout_cnt-- < 0) {
@@ -606,93 +606,41 @@ static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev)
 {
 	u16 *data;
-
+	u32 data_align = (unsigned long)(skb->data) & 0x3;
 	current_tx_ptr->skb = skb;
 
-	if (ANOMALY_05000285) {
-		/*
-		 * TXDWA feature is not avaible to older revision < 0.3 silicon
-		 * of BF537
-		 *
-		 * Only if data buffer is ODD WORD alignment, we do not
-		 * need to memcpy
-		 */
-		u32 data_align = (u32)(skb->data) & 0x3;
-		if (data_align == 0x2) {
-			/* move skb->data to current_tx_ptr payload */
-			data = (u16 *)(skb->data) - 1;
-			*data = (u16)(skb->len);
-			current_tx_ptr->desc_a.start_addr = (u32)data;
-			/* this is important! */
-			blackfin_dcache_flush_range((u32)data,
-					(u32)((u8 *)data + skb->len + 4));
-		} else {
-			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
-			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
-				skb->len);
-			current_tx_ptr->desc_a.start_addr =
-				(u32)current_tx_ptr->packet;
-			if (current_tx_ptr->status.status_word != 0)
-				current_tx_ptr->status.status_word = 0;
-			blackfin_dcache_flush_range(
-				(u32)current_tx_ptr->packet,
-				(u32)(current_tx_ptr->packet + skb->len + 2));
-		}
+	if (data_align == 0x2) {
+		/* move skb->data to current_tx_ptr payload */
+		data = (u16 *)(skb->data) - 1;
+				*data = (u16)(skb->len);
+		current_tx_ptr->desc_a.start_addr = (u32)data;
+		/* this is important! */
+		blackfin_dcache_flush_range((u32)data,
+				(u32)((u8 *)data + skb->len + 4));
 	} else {
-		/*
-		 * TXDWA feature is avaible to revision < 0.3 silicon of
-		 * BF537 and always avaible to BF52x
-		 */
-		u32 data_align = (u32)(skb->data) & 0x3;
-		if (data_align == 0x0) {
-			u16 sysctl = bfin_read_EMAC_SYSCTL();
-			sysctl |= TXDWA;
-			bfin_write_EMAC_SYSCTL(sysctl);
-
-			/* move skb->data to current_tx_ptr payload */
-			data = (u16 *)(skb->data) - 2;
-			*data = (u16)(skb->len);
-			current_tx_ptr->desc_a.start_addr = (u32)data;
-			/* this is important! */
-			blackfin_dcache_flush_range(
-					(u32)data,
-					(u32)((u8 *)data + skb->len + 4));
-		} else if (data_align == 0x2) {
-			u16 sysctl = bfin_read_EMAC_SYSCTL();
-			sysctl &= ~TXDWA;
-			bfin_write_EMAC_SYSCTL(sysctl);
-
-			/* move skb->data to current_tx_ptr payload */
-			data = (u16 *)(skb->data) - 1;
-			*data = (u16)(skb->len);
-			current_tx_ptr->desc_a.start_addr = (u32)data;
-			/* this is important! */
-			blackfin_dcache_flush_range(
-					(u32)data,
-					(u32)((u8 *)data + skb->len + 4));
-		} else {
-			u16 sysctl = bfin_read_EMAC_SYSCTL();
-			sysctl &= ~TXDWA;
-			bfin_write_EMAC_SYSCTL(sysctl);
-
-			*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
-			memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
-				skb->len);
-			current_tx_ptr->desc_a.start_addr =
-				(u32)current_tx_ptr->packet;
-			if (current_tx_ptr->status.status_word != 0)
-				current_tx_ptr->status.status_word = 0;
-			blackfin_dcache_flush_range(
-				(u32)current_tx_ptr->packet,
-				(u32)(current_tx_ptr->packet + skb->len + 2));
-		}
+		*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+		memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+			skb->len);
+		current_tx_ptr->desc_a.start_addr =
+			(u32)current_tx_ptr->packet;
+		if (current_tx_ptr->status.status_word != 0)
+			current_tx_ptr->status.status_word = 0;
+		blackfin_dcache_flush_range(
+			(u32)current_tx_ptr->packet,
+			(u32)(current_tx_ptr->packet + skb->len + 2));
 	}
 
+	/* make sure the internal data buffers in the core are drained
+	 * so that the DMA descriptors are completely written when the
+	 * DMA engine goes to fetch them below
+	 */
+	SSYNC();
+
 	/* enable this packet's dma */
 	current_tx_ptr->desc_a.config |= DMAEN;
 
 	/* tx dma is running, just return */
-	if (bfin_read_DMA2_IRQ_STATUS() & 0x08)
+	if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
 		goto out;
 
 	/* tx dma is not running */
@@ -718,7 +666,7 @@ static void bfin_mac_rx(struct net_device *dev)
 
 	/* allocate a new skb for next time receive */
 	skb = current_rx_ptr->skb;
-	new_skb = dev_alloc_skb(PKT_BUF_SZ + 2);
+	new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 	if (!new_skb) {
 		printk(KERN_NOTICE DRV_NAME
 		       ": rx: low on mem - packet dropped\n");
@@ -726,7 +674,7 @@ static void bfin_mac_rx(struct net_device *dev)
 		goto out;
 	}
 	/* reserve 2 bytes for RXDWA padding */
-	skb_reserve(new_skb, 2);
+	skb_reserve(new_skb, NET_IP_ALIGN);
 	current_rx_ptr->skb = new_skb;
 	current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
 
@@ -1022,7 +970,8 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 {
 	struct net_device *ndev;
 	struct bfin_mac_local *lp;
-	int rc, i;
+	struct platform_device *pd;
+	int rc;
 
 	ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
 	if (!ndev) {
@@ -1047,13 +996,6 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 		goto out_err_probe_mac;
 	}
 
-	/* set the GPIO pins to Ethernet mode */
-	rc = peripheral_request_list(pin_req, DRV_NAME);
-	if (rc) {
-		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
-		rc = -EFAULT;
-		goto out_err_setup_pin_mux;
-	}
 
 	/*
 	 * Is it valid? (Did bootloader initialize it?)
@@ -1069,26 +1011,14 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 
 	setup_mac_addr(ndev->dev_addr);
 
-	/* MDIO bus initial */
-	lp->mii_bus = mdiobus_alloc();
-	if (lp->mii_bus == NULL)
-		goto out_err_mdiobus_alloc;
-
-	lp->mii_bus->priv = ndev;
-	lp->mii_bus->read = bfin_mdiobus_read;
-	lp->mii_bus->write = bfin_mdiobus_write;
-	lp->mii_bus->reset = bfin_mdiobus_reset;
-	lp->mii_bus->name = "bfin_mac_mdio";
-	snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "0");
-	lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-	for (i = 0; i < PHY_MAX_ADDR; ++i)
-		lp->mii_bus->irq[i] = PHY_POLL;
-
-	rc = mdiobus_register(lp->mii_bus);
-	if (rc) {
-		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
-		goto out_err_mdiobus_register;
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
+		rc = -ENODEV;
+		goto out_err_probe_mac;
 	}
+	pd = pdev->dev.platform_data;
+	lp->mii_bus = platform_get_drvdata(pd);
+	lp->mii_bus->priv = ndev;
 
 	rc = mii_probe(ndev);
 	if (rc) {
@@ -1107,7 +1037,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 	/* now, enable interrupts */
 	/* register irq handler */
 	rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt,
-			IRQF_DISABLED | IRQF_SHARED, "EMAC_RX", ndev);
+			IRQF_DISABLED, "EMAC_RX", ndev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n");
 		rc = -EBUSY;
@@ -1130,11 +1060,8 @@ out_err_reg_ndev:
 out_err_request_irq:
 out_err_mii_probe:
 	mdiobus_unregister(lp->mii_bus);
-out_err_mdiobus_register:
 	mdiobus_free(lp->mii_bus);
-out_err_mdiobus_alloc:
 	peripheral_free_list(pin_req);
-out_err_setup_pin_mux:
 out_err_probe_mac:
 	platform_set_drvdata(pdev, NULL);
 	free_netdev(ndev);
@@ -1149,8 +1076,7 @@ static int __devexit bfin_mac_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	mdiobus_unregister(lp->mii_bus);
-	mdiobus_free(lp->mii_bus);
+	lp->mii_bus->priv = NULL;
 
 	unregister_netdev(ndev);
 
@@ -1188,6 +1114,74 @@ static int bfin_mac_resume(struct platform_device *pdev)
 #define bfin_mac_resume NULL
 #endif	/* CONFIG_PM */
 
+static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
+{
+	struct mii_bus *miibus;
+	int rc, i;
+
+	/*
+	 * We are setting up a network card,
+	 * so set the GPIO pins to Ethernet mode
+	 */
+	rc = peripheral_request_list(pin_req, DRV_NAME);
+	if (rc) {
+		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
+		return rc;
+	}
+
+	rc = -ENOMEM;
+	miibus = mdiobus_alloc();
+	if (miibus == NULL)
+		goto out_err_alloc;
+	miibus->read = bfin_mdiobus_read;
+	miibus->write = bfin_mdiobus_write;
+	miibus->reset = bfin_mdiobus_reset;
+
+	miibus->parent = &pdev->dev;
+	miibus->name = "bfin_mii_bus";
+	snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
+	miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+	if (miibus->irq == NULL)
+		goto out_err_alloc;
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		miibus->irq[i] = PHY_POLL;
+
+	rc = mdiobus_register(miibus);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+		goto out_err_mdiobus_register;
+	}
+
+	platform_set_drvdata(pdev, miibus);
+	return 0;
+
+out_err_mdiobus_register:
+	mdiobus_free(miibus);
+out_err_alloc:
+	peripheral_free_list(pin_req);
+
+	return rc;
+}
+
+static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
+{
+	struct mii_bus *miibus = platform_get_drvdata(pdev);
+	platform_set_drvdata(pdev, NULL);
+	mdiobus_unregister(miibus);
+	mdiobus_free(miibus);
+	peripheral_free_list(pin_req);
+	return 0;
+}
+
+static struct platform_driver bfin_mii_bus_driver = {
+	.probe = bfin_mii_bus_probe,
+	.remove = __devexit_p(bfin_mii_bus_remove),
+	.driver = {
+		.name = "bfin_mii_bus",
+		.owner	= THIS_MODULE,
+	},
+};
+
 static struct platform_driver bfin_mac_driver = {
 	.probe = bfin_mac_probe,
 	.remove = __devexit_p(bfin_mac_remove),
@@ -1201,7 +1195,11 @@ static struct platform_driver bfin_mac_driver = {
 
 static int __init bfin_mac_init(void)
 {
-	return platform_driver_register(&bfin_mac_driver);
+	int ret;
+	ret = platform_driver_register(&bfin_mii_bus_driver);
+	if (!ret)
+		return platform_driver_register(&bfin_mac_driver);
+	return -ENODEV;
 }
 
 module_init(bfin_mac_init);
@@ -1209,6 +1207,7 @@ module_init(bfin_mac_init);
 static void __exit bfin_mac_cleanup(void)
 {
 	platform_driver_unregister(&bfin_mac_driver);
+	platform_driver_unregister(&bfin_mii_bus_driver);
 }
 
 module_exit(bfin_mac_cleanup);
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 44d015f70d1..9578a3dfac0 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1247,6 +1247,16 @@ static const struct ethtool_ops bmac_ethtool_ops = {
 	.get_link		= ethtool_op_get_link,
 };
 
+static const struct net_device_ops bmac_netdev_ops = {
+	.ndo_open		= bmac_open,
+	.ndo_stop		= bmac_close,
+	.ndo_start_xmit		= bmac_output,
+	.ndo_set_multicast_list	= bmac_set_multicast,
+	.ndo_set_mac_address	= bmac_set_address,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __devinit bmac_probe(struct macio_dev *mdev, const struct of_device_id *match)
 {
 	int j, rev, ret;
@@ -1308,12 +1318,8 @@ static int __devinit bmac_probe(struct macio_dev *mdev, const struct of_device_i
 	bmac_enable_and_reset_chip(dev);
 	bmwrite(dev, INTDISABLE, DisableAll);
 
-	dev->open = bmac_open;
-	dev->stop = bmac_close;
+	dev->netdev_ops = &bmac_netdev_ops;
 	dev->ethtool_ops = &bmac_ethtool_ops;
-	dev->hard_start_xmit = bmac_output;
-	dev->set_multicast_list = bmac_set_multicast;
-	dev->set_mac_address = bmac_set_address;
 
 	bmac_get_station_address(dev, addr);
 	if (bmac_verify_checksum(dev) != 0)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 3f5fcb0156a..7e3738112c4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -48,6 +48,7 @@
 #include <linux/cache.h>
 #include <linux/firmware.h>
 #include <linux/log2.h>
+#include <linux/list.h>
 
 #if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
 #define BCM_CNIC 1
@@ -703,8 +704,7 @@ bnx2_free_rx_mem(struct bnx2 *bp)
 						    rxr->rx_desc_mapping[j]);
 			rxr->rx_desc_ring[j] = NULL;
 		}
-		if (rxr->rx_buf_ring)
-			vfree(rxr->rx_buf_ring);
+		vfree(rxr->rx_buf_ring);
 		rxr->rx_buf_ring = NULL;
 
 		for (j = 0; j < bp->rx_max_pg_ring; j++) {
@@ -714,8 +714,7 @@ bnx2_free_rx_mem(struct bnx2 *bp)
 						    rxr->rx_pg_desc_mapping[j]);
 			rxr->rx_pg_desc_ring[j] = NULL;
 		}
-		if (rxr->rx_pg_ring)
-			vfree(rxr->rx_pg_ring);
+		vfree(rxr->rx_pg_ring);
 		rxr->rx_pg_ring = NULL;
 	}
 }
@@ -2788,14 +2787,15 @@ bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		tx_buf = &txr->tx_buf_ring[sw_ring_cons];
 		skb = tx_buf->skb;
 
+		/* prefetch skb_end_pointer() to speedup skb_shinfo(skb) */
+		prefetch(&skb->end);
+
 		/* partial BD completions possible with TSO packets */
-		if (skb_is_gso(skb)) {
+		if (tx_buf->is_gso) {
 			u16 last_idx, last_ring_idx;
 
-			last_idx = sw_cons +
-				skb_shinfo(skb)->nr_frags + 1;
-			last_ring_idx = sw_ring_cons +
-				skb_shinfo(skb)->nr_frags + 1;
+			last_idx = sw_cons + tx_buf->nr_frags + 1;
+			last_ring_idx = sw_ring_cons + tx_buf->nr_frags + 1;
 			if (unlikely(last_ring_idx >= MAX_TX_DESC_CNT)) {
 				last_idx++;
 			}
@@ -2807,7 +2807,7 @@ bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		skb_dma_unmap(&bp->pdev->dev, skb, DMA_TO_DEVICE);
 
 		tx_buf->skb = NULL;
-		last = skb_shinfo(skb)->nr_frags;
+		last = tx_buf->nr_frags;
 
 		for (i = 0; i < last; i++) {
 			sw_cons = NEXT_TX_BD(sw_cons);
@@ -2820,7 +2820,8 @@ bnx2_tx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		if (tx_pkt == budget)
 			break;
 
-		hw_cons = bnx2_get_hw_tx_cons(bnapi);
+		if (hw_cons == sw_cons)
+			hw_cons = bnx2_get_hw_tx_cons(bnapi);
 	}
 
 	txr->hw_tx_cons = hw_cons;
@@ -3492,7 +3493,7 @@ bnx2_set_rx_mode(struct net_device *dev)
 {
 	struct bnx2 *bp = netdev_priv(dev);
 	u32 rx_mode, sort_mode;
-	struct dev_addr_list *uc_ptr;
+	struct netdev_hw_addr *ha;
 	int i;
 
 	if (!netif_running(dev))
@@ -3551,21 +3552,19 @@ bnx2_set_rx_mode(struct net_device *dev)
 		sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN;
 	}
 
-	uc_ptr = NULL;
 	if (dev->uc_count > BNX2_MAX_UNICAST_ADDRESSES) {
 		rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
 		sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN |
 			     BNX2_RPM_SORT_USER0_PROM_VLAN;
 	} else if (!(dev->flags & IFF_PROMISC)) {
-		uc_ptr = dev->uc_list;
-
 		/* Add all entries into to the match filter list */
-		for (i = 0; i < dev->uc_count; i++) {
-			bnx2_set_mac_addr(bp, uc_ptr->da_addr,
+		i = 0;
+		list_for_each_entry(ha, &dev->uc_list, list) {
+			bnx2_set_mac_addr(bp, ha->addr,
 					  i + BNX2_START_UNICAST_ADDRESS_INDEX);
 			sort_mode |= (1 <<
 				      (i + BNX2_START_UNICAST_ADDRESS_INDEX));
-			uc_ptr = uc_ptr->next;
+			i++;
 		}
 
 	}
@@ -5673,7 +5672,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
 		dev_kfree_skb(skb);
 		return -EIO;
 	}
-	map = skb_shinfo(skb)->dma_maps[0];
+	map = skb_shinfo(skb)->dma_head;
 
 	REG_WR(bp, BNX2_HC_COMMAND,
 	       bp->hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
@@ -6353,7 +6352,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	sp = skb_shinfo(skb);
-	mapping = sp->dma_maps[0];
+	mapping = sp->dma_head;
 
 	tx_buf = &txr->tx_buf_ring[ring_prod];
 	tx_buf->skb = skb;
@@ -6366,6 +6365,8 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	txbd->tx_bd_vlan_tag_flags = vlan_tag_flags | TX_BD_FLAGS_START;
 
 	last_frag = skb_shinfo(skb)->nr_frags;
+	tx_buf->nr_frags = last_frag;
+	tx_buf->is_gso = skb_is_gso(skb);
 
 	for (i = 0; i < last_frag; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
@@ -6375,7 +6376,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		txbd = &txr->tx_desc_ring[ring_prod];
 
 		len = frag->size;
-		mapping = sp->dma_maps[i + 1];
+		mapping = sp->dma_maps[i];
 
 		txbd->tx_bd_haddr_hi = (u64) mapping >> 32;
 		txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff;
@@ -6394,7 +6395,6 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	mmiowb();
 
 	txr->tx_prod = prod;
-	dev->trans_start = jiffies;
 
 	if (unlikely(bnx2_tx_avail(bp, txr) <= MAX_SKB_FRAGS)) {
 		netif_tx_stop_queue(txq);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index a1ff739bc9b..f1edfaa9e56 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6556,6 +6556,8 @@ struct sw_pg {
 
 struct sw_tx_bd {
 	struct sk_buff		*skb;
+	unsigned short		is_gso;
+	unsigned short		nr_frags;
 };
 
 #define SW_RXBD_RING_SIZE (sizeof(struct sw_bd) * RX_DESC_CNT)
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index a329bee2555..8678457849f 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -965,6 +965,21 @@ struct bnx2x {
 	int			gunzip_outlen;
 #define FW_BUF_SIZE			0x8000
 
+	struct raw_op          *init_ops;
+	/* Init blocks offsets inside init_ops */
+	u16                    *init_ops_offsets;
+	/* Data blob - has 32 bit granularity */
+	u32                    *init_data;
+	/* Zipped PRAM blobs - raw data */
+	const u8               *tsem_int_table_data;
+	const u8               *tsem_pram_data;
+	const u8               *usem_int_table_data;
+	const u8               *usem_pram_data;
+	const u8               *xsem_int_table_data;
+	const u8               *xsem_pram_data;
+	const u8               *csem_int_table_data;
+	const u8               *csem_pram_data;
+        const struct firmware  *firmware;
 };
 
 
diff --git a/drivers/net/bnx2x_fw_file_hdr.h b/drivers/net/bnx2x_fw_file_hdr.h
new file mode 100644
index 00000000000..3f5ee5d7cc2
--- /dev/null
+++ b/drivers/net/bnx2x_fw_file_hdr.h
@@ -0,0 +1,37 @@
+/* bnx2x_fw_file_hdr.h: FW binary file header structure.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ * Based on the original idea of John Wright <john.wright@hp.com>.
+ */
+
+#ifndef BNX2X_INIT_FILE_HDR_H
+#define BNX2X_INIT_FILE_HDR_H
+
+struct bnx2x_fw_file_section {
+	__be32 len;
+	__be32 offset;
+};
+
+struct bnx2x_fw_file_hdr {
+	struct bnx2x_fw_file_section init_ops;
+	struct bnx2x_fw_file_section init_ops_offsets;
+	struct bnx2x_fw_file_section init_data;
+	struct bnx2x_fw_file_section tsem_int_table_data;
+	struct bnx2x_fw_file_section tsem_pram_data;
+	struct bnx2x_fw_file_section usem_int_table_data;
+	struct bnx2x_fw_file_section usem_pram_data;
+	struct bnx2x_fw_file_section csem_int_table_data;
+	struct bnx2x_fw_file_section csem_pram_data;
+	struct bnx2x_fw_file_section xsem_int_table_data;
+	struct bnx2x_fw_file_section xsem_pram_data;
+	struct bnx2x_fw_file_section fw_version;
+};
+
+#endif /* BNX2X_INIT_FILE_HDR_H */
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 39ba2936c0c..3ba4d888068 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -1,4 +1,5 @@
 /* bnx2x_init.h: Broadcom Everest network driver.
+ *               Structures and macroes needed during the initialization.
  *
  * Copyright (c) 2007-2009 Broadcom Corporation
  *
@@ -8,6 +9,7 @@
  *
  * Maintained by: Eilon Greenstein <eilong@broadcom.com>
  * Written by: Eliezer Tamir
+ * Modified by: Vladislav Zolotarov <vladz@broadcom.com>
  */
 
 #ifndef BNX2X_INIT_H
@@ -45,33 +47,71 @@
 #define OP_WR_64		0x8 /* write 64 bit pattern */
 #define OP_WB			0x9 /* copy a string using DMAE */
 
-/* Operation specific for E1 */
-#define OP_RD_E1		0xa /* read single register */
-#define OP_WR_E1		0xb /* write single register */
-#define OP_IW_E1		0xc /* write single register using mailbox */
-#define OP_SW_E1		0xd /* copy a string to the device */
-#define OP_SI_E1		0xe /* copy a string using mailbox */
-#define OP_ZR_E1		0xf /* clear memory */
-#define OP_ZP_E1		0x10 /* unzip then copy with DMAE */
-#define OP_WR_64_E1		0x11 /* write 64 bit pattern on E1 */
-#define OP_WB_E1		0x12 /* copy a string using DMAE */
-
-/* Operation specific for E1H */
-#define OP_RD_E1H		0x13 /* read single register */
-#define OP_WR_E1H		0x14 /* write single register */
-#define OP_IW_E1H		0x15 /* write single register using mailbox */
-#define OP_SW_E1H		0x16 /* copy a string to the device */
-#define OP_SI_E1H		0x17 /* copy a string using mailbox */
-#define OP_ZR_E1H		0x18 /* clear memory */
-#define OP_ZP_E1H		0x19 /* unzip then copy with DMAE */
-#define OP_WR_64_E1H		0x1a /* write 64 bit pattern on E1H */
-#define OP_WB_E1H		0x1b /* copy a string using DMAE */
-
 /* FPGA and EMUL specific operations */
-#define OP_WR_EMUL_E1H		0x1c /* write single register on E1H Emul */
-#define OP_WR_EMUL		0x1d /* write single register on Emulation */
-#define OP_WR_FPGA		0x1e /* write single register on FPGA */
-#define OP_WR_ASIC		0x1f /* write single register on ASIC */
+#define OP_WR_EMUL		0xa /* write single register on Emulation */
+#define OP_WR_FPGA		0xb /* write single register on FPGA */
+#define OP_WR_ASIC		0xc /* write single register on ASIC */
+
+/* Init stages */
+#define COMMON_STAGE            0
+#define PORT0_STAGE     	1
+#define PORT1_STAGE     	2
+/* Never reorder FUNCx stages !!! */
+#define FUNC0_STAGE     	3
+#define FUNC1_STAGE     	4
+#define FUNC2_STAGE     	5
+#define FUNC3_STAGE     	6
+#define FUNC4_STAGE     	7
+#define FUNC5_STAGE     	8
+#define FUNC6_STAGE     	9
+#define FUNC7_STAGE     	10
+#define STAGE_IDX_MAX   	11
+
+#define STAGE_START     	0
+#define STAGE_END       	1
+
+
+/* Indices of blocks */
+#define PRS_BLOCK               0
+#define SRCH_BLOCK              1
+#define TSDM_BLOCK              2
+#define TCM_BLOCK               3
+#define BRB1_BLOCK              4
+#define TSEM_BLOCK              5
+#define PXPCS_BLOCK             6
+#define EMAC0_BLOCK             7
+#define EMAC1_BLOCK             8
+#define DBU_BLOCK               9
+#define MISC_BLOCK              10
+#define DBG_BLOCK               11
+#define NIG_BLOCK               12
+#define MCP_BLOCK               13
+#define UPB_BLOCK               14
+#define CSDM_BLOCK              15
+#define USDM_BLOCK              16
+#define CCM_BLOCK               17
+#define UCM_BLOCK               18
+#define USEM_BLOCK              19
+#define CSEM_BLOCK              20
+#define XPB_BLOCK               21
+#define DQ_BLOCK                22
+#define TIMERS_BLOCK            23
+#define XSDM_BLOCK              24
+#define QM_BLOCK                25
+#define PBF_BLOCK               26
+#define XCM_BLOCK               27
+#define XSEM_BLOCK              28
+#define CDU_BLOCK               29
+#define DMAE_BLOCK              30
+#define PXP_BLOCK               31
+#define CFC_BLOCK               32
+#define HC_BLOCK                33
+#define PXP2_BLOCK              34
+#define MISC_AEU_BLOCK          35
+
+/* Returns the index of start or end of a specific block stage in ops array*/
+#define BLOCK_OPS_IDX(block, stage, end) \
+       (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
 
 
 struct raw_op {
@@ -118,292 +158,6 @@ union init_op {
 	struct raw_op		raw;
 };
 
-#include "bnx2x_init_values.h"
-
-static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len);
-
-static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
-			      u32 len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		REG_WR(bp, addr + i*4, data[i]);
-		if (!(i % 10000)) {
-			touch_softlockup_watchdog();
-			cpu_relax();
-		}
-	}
-}
-
-static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
-			      u16 len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		REG_WR_IND(bp, addr + i*4, data[i]);
-		if (!(i % 10000)) {
-			touch_softlockup_watchdog();
-			cpu_relax();
-		}
-	}
-}
-
-static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
-{
-	int offset = 0;
-
-	if (bp->dmae_ready) {
-		while (len > DMAE_LEN32_WR_MAX) {
-			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-					 addr + offset, DMAE_LEN32_WR_MAX);
-			offset += DMAE_LEN32_WR_MAX * 4;
-			len -= DMAE_LEN32_WR_MAX;
-		}
-		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-				 addr + offset, len);
-	} else
-		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
-{
-	u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
-	u32 buf_len32 = buf_len / 4;
-	int i;
-
-	memset(bp->gunzip_buf, fill, buf_len);
-
-	for (i = 0; i < len; i += buf_len32) {
-		u32 cur_len = min(buf_len32, len - i);
-
-		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
-	}
-}
-
-static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
-			     u32 len64)
-{
-	u32 buf_len32 = FW_BUF_SIZE / 4;
-	u32 len = len64 * 2;
-	u64 data64 = 0;
-	int i;
-
-	/* 64 bit value is in a blob: first low DWORD, then high DWORD */
-	data64 = HILO_U64((*(data + 1)), (*data));
-	len64 = min((u32)(FW_BUF_SIZE/8), len64);
-	for (i = 0; i < len64; i++) {
-		u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
-
-		*pdata = data64;
-	}
-
-	for (i = 0; i < len; i += buf_len32) {
-		u32 cur_len = min(buf_len32, len - i);
-
-		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
-	}
-}
-
-/*********************************************************
-   There are different blobs for each PRAM section.
-   In addition, each blob write operation is divided into a few operations
-   in order to decrease the amount of phys. contiguous buffer needed.
-   Thus, when we select a blob the address may be with some offset
-   from the beginning of PRAM section.
-   The same holds for the INT_TABLE sections.
-**********************************************************/
-#define IF_IS_INT_TABLE_ADDR(base, addr) \
-			if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
-
-#define IF_IS_PRAM_ADDR(base, addr) \
-			if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
-
-static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1)
-{
-	IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
-		data = is_e1 ? tsem_int_table_data_e1 :
-			       tsem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
-			data = is_e1 ? csem_int_table_data_e1 :
-				       csem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
-			data = is_e1 ? usem_int_table_data_e1 :
-				       usem_int_table_data_e1h;
-	else
-		IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
-			data = is_e1 ? xsem_int_table_data_e1 :
-				       xsem_int_table_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
-			data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
-			data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
-			data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h;
-	else
-		IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
-			data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h;
-
-	return data;
-}
-
-static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
-			     u32 len, int gunzip, int is_e1, u32 blob_off)
-{
-	int offset = 0;
-
-	data = bnx2x_sel_blob(addr, data, is_e1) + blob_off;
-
-	if (gunzip) {
-		int rc;
-#ifdef __BIG_ENDIAN
-		int i, size;
-		u32 *temp;
-
-		temp = kmalloc(len, GFP_KERNEL);
-		size = (len / 4) + ((len % 4) ? 1 : 0);
-		for (i = 0; i < size; i++)
-			temp[i] = swab32(data[i]);
-		data = temp;
-#endif
-		rc = bnx2x_gunzip(bp, (u8 *)data, len);
-		if (rc) {
-			BNX2X_ERR("gunzip failed ! rc %d\n", rc);
-#ifdef __BIG_ENDIAN
-			kfree(temp);
-#endif
-			return;
-		}
-		len = bp->gunzip_outlen;
-#ifdef __BIG_ENDIAN
-		kfree(temp);
-		for (i = 0; i < len; i++)
-			((u32 *)bp->gunzip_buf)[i] =
-					swab32(((u32 *)bp->gunzip_buf)[i]);
-#endif
-	} else {
-		if ((len * 4) > FW_BUF_SIZE) {
-			BNX2X_ERR("LARGE DMAE OPERATION ! "
-				  "addr 0x%x  len 0x%x\n", addr, len*4);
-			return;
-		}
-		memcpy(bp->gunzip_buf, data, len * 4);
-	}
-
-	if (bp->dmae_ready) {
-		while (len > DMAE_LEN32_WR_MAX) {
-			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-					 addr + offset, DMAE_LEN32_WR_MAX);
-			offset += DMAE_LEN32_WR_MAX * 4;
-			len -= DMAE_LEN32_WR_MAX;
-		}
-		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
-				 addr + offset, len);
-	} else
-		bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
-}
-
-static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
-{
-	int is_e1       = CHIP_IS_E1(bp);
-	int is_e1h      = CHIP_IS_E1H(bp);
-	int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h);
-	int hw_wr, i;
-	union init_op *op;
-	u32 op_type, addr, len;
-	const u32 *data, *data_base;
-
-	if (CHIP_REV_IS_FPGA(bp))
-		hw_wr = OP_WR_FPGA;
-	else if (CHIP_REV_IS_EMUL(bp))
-		hw_wr = OP_WR_EMUL;
-	else
-		hw_wr = OP_WR_ASIC;
-
-	if (is_e1)
-		data_base = init_data_e1;
-	else /* CHIP_IS_E1H(bp) */
-		data_base = init_data_e1h;
-
-	for (i = op_start; i < op_end; i++) {
-
-		op = (union init_op *)&(init_ops[i]);
-
-		op_type = op->str_wr.op;
-		addr = op->str_wr.offset;
-		len = op->str_wr.data_len;
-		data = data_base + op->str_wr.data_off;
-
-		/* careful! it must be in order */
-		if (unlikely(op_type > OP_WB)) {
-
-			/* If E1 only */
-			if (op_type <= OP_WB_E1) {
-				if (is_e1)
-					op_type -= (OP_RD_E1 - OP_RD);
-
-			/* If E1H only */
-			} else if (op_type <= OP_WB_E1H) {
-				if (is_e1h)
-					op_type -= (OP_RD_E1H - OP_RD);
-			}
-
-			/* HW/EMUL specific */
-			if (op_type == hw_wr)
-				op_type = OP_WR;
-
-			/* EMUL on E1H is special */
-			if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h)
-				op_type = OP_WR;
-		}
-
-		switch (op_type) {
-		case OP_RD:
-			REG_RD(bp, addr);
-			break;
-		case OP_WR:
-			REG_WR(bp, addr, op->write.val);
-			break;
-		case OP_SW:
-			bnx2x_init_str_wr(bp, addr, data, len);
-			break;
-		case OP_WB:
-			bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0);
-			break;
-		case OP_SI:
-			bnx2x_init_ind_wr(bp, addr, data, len);
-			break;
-		case OP_ZR:
-			bnx2x_init_fill(bp, addr, 0, op->zero.len);
-			break;
-		case OP_ZP:
-			bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1,
-					 op->str_wr.data_off);
-			break;
-		case OP_WR_64:
-			bnx2x_init_wr_64(bp, addr, data, len);
-			break;
-		default:
-			/* happens whenever an op is of a diff HW */
-#if 0
-			DP(NETIF_MSG_HW, "skipping init operation  "
-			   "index %d[%d:%d]: type %d  addr 0x%x  "
-			   "len %d(0x%x)\n",
-			   i, op_start, op_end, op_type, addr, len, len);
-#endif
-			break;
-		}
-	}
-}
-
-
 /****************************************************************************
 * PXP
 ****************************************************************************/
@@ -567,111 +321,6 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
 		PXP2_REG_RQ_BW_WR_UBOUND30}
 };
 
-static void bnx2x_init_pxp(struct bnx2x *bp)
-{
-	u16 devctl;
-	int r_order, w_order;
-	u32 val, i;
-
-	pci_read_config_word(bp->pdev,
-			     bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
-	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
-	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
-	if (bp->mrrs == -1)
-		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
-	else {
-		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
-		r_order = bp->mrrs;
-	}
-
-	if (r_order > MAX_RD_ORD) {
-		DP(NETIF_MSG_HW, "read order of %d  order adjusted to %d\n",
-		   r_order, MAX_RD_ORD);
-		r_order = MAX_RD_ORD;
-	}
-	if (w_order > MAX_WR_ORD) {
-		DP(NETIF_MSG_HW, "write order of %d  order adjusted to %d\n",
-		   w_order, MAX_WR_ORD);
-		w_order = MAX_WR_ORD;
-	}
-	if (CHIP_REV_IS_FPGA(bp)) {
-		DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
-		w_order = 0;
-	}
-	DP(NETIF_MSG_HW, "read order %d  write order %d\n", r_order, w_order);
-
-	for (i = 0; i < NUM_RD_Q-1; i++) {
-		REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
-		REG_WR(bp, read_arb_addr[i].add,
-		       read_arb_data[i][r_order].add);
-		REG_WR(bp, read_arb_addr[i].ubound,
-		       read_arb_data[i][r_order].ubound);
-	}
-
-	for (i = 0; i < NUM_WR_Q-1; i++) {
-		if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
-		    (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
-
-			REG_WR(bp, write_arb_addr[i].l,
-			       write_arb_data[i][w_order].l);
-
-			REG_WR(bp, write_arb_addr[i].add,
-			       write_arb_data[i][w_order].add);
-
-			REG_WR(bp, write_arb_addr[i].ubound,
-			       write_arb_data[i][w_order].ubound);
-		} else {
-
-			val = REG_RD(bp, write_arb_addr[i].l);
-			REG_WR(bp, write_arb_addr[i].l,
-			       val | (write_arb_data[i][w_order].l << 10));
-
-			val = REG_RD(bp, write_arb_addr[i].add);
-			REG_WR(bp, write_arb_addr[i].add,
-			       val | (write_arb_data[i][w_order].add << 10));
-
-			val = REG_RD(bp, write_arb_addr[i].ubound);
-			REG_WR(bp, write_arb_addr[i].ubound,
-			       val | (write_arb_data[i][w_order].ubound << 7));
-		}
-	}
-
-	val =  write_arb_data[NUM_WR_Q-1][w_order].add;
-	val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
-	val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
-	REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
-
-	val =  read_arb_data[NUM_RD_Q-1][r_order].add;
-	val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
-	val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
-	REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
-
-	REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
-	REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
-	REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
-	REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
-
-	if (r_order == MAX_RD_ORD)
-		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
-
-	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
-
-	if (CHIP_IS_E1H(bp)) {
-		val = ((w_order == 0) ? 2 : 3);
-		REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
-		REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
-		REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
-	}
-}
-
 
 /****************************************************************************
 * CDU
@@ -695,128 +344,12 @@ static void bnx2x_init_pxp(struct bnx2x *bp)
 	(0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7))
 #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val)	((_val) & ~0x80)
 
-/*****************************************************************************
- * Description:
- *         Calculates crc 8 on a word value: polynomial 0-1-2-8
- *         Code was translated from Verilog.
- ****************************************************************************/
-static u8 calc_crc8(u32 data, u8 crc)
-{
-	u8 D[32];
-	u8 NewCRC[8];
-	u8 C[8];
-	u8 crc_res;
-	u8 i;
-
-	/* split the data into 31 bits */
-	for (i = 0; i < 32; i++) {
-		D[i] = data & 1;
-		data = data >> 1;
-	}
-
-	/* split the crc into 8 bits */
-	for (i = 0; i < 8; i++) {
-		C[i] = crc & 1;
-		crc = crc >> 1;
-	}
-
-	NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
-		D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
-		C[6] ^ C[7];
-	NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
-		D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
-		D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
-	NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
-		D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
-		C[0] ^ C[1] ^ C[4] ^ C[5];
-	NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
-		D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
-		C[1] ^ C[2] ^ C[5] ^ C[6];
-	NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
-		D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
-		C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
-	NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
-		D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
-		C[3] ^ C[4] ^ C[7];
-	NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
-		D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
-		C[5];
-	NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
-		D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
-		C[6];
-
-	crc_res = 0;
-	for (i = 0; i < 8; i++)
-		crc_res |= (NewCRC[i] << i);
-
-	return crc_res;
-}
 
 /* registers addresses are not in order
    so these arrays help simplify the code */
-static const int cm_start[E1H_FUNC_MAX][9] = {
-	{MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
-	 XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START,
-	 XSEM_FUNC0_START},
-	{MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START,
-	 XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START,
-	 XSEM_FUNC1_START},
-	{MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START,
-	 XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START,
-	 XSEM_FUNC2_START},
-	{MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START,
-	 XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START,
-	 XSEM_FUNC3_START},
-	{MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START,
-	 XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START,
-	 XSEM_FUNC4_START},
-	{MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START,
-	 XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START,
-	 XSEM_FUNC5_START},
-	{MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START,
-	 XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START,
-	 XSEM_FUNC6_START},
-	{MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START,
-	 XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START,
-	 XSEM_FUNC7_START}
-};
-
-static const int cm_end[E1H_FUNC_MAX][9] = {
-	{MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END,
-	 XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END,
-	 XSEM_FUNC0_END},
-	{MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END,
-	 XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END,
-	 XSEM_FUNC1_END},
-	{MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END,
-	 XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END,
-	 XSEM_FUNC2_END},
-	{MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END,
-	 XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END,
-	 XSEM_FUNC3_END},
-	{MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END,
-	 XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END,
-	 XSEM_FUNC4_END},
-	{MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END,
-	 XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END,
-	 XSEM_FUNC5_END},
-	{MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END,
-	 XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END,
-	 XSEM_FUNC6_END},
-	{MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END,
-	 XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END,
-	 XSEM_FUNC7_END},
-};
-
-static const int hc_limits[E1H_FUNC_MAX][2] = {
-	{HC_FUNC0_START, HC_FUNC0_END},
-	{HC_FUNC1_START, HC_FUNC1_END},
-	{HC_FUNC2_START, HC_FUNC2_END},
-	{HC_FUNC3_START, HC_FUNC3_END},
-	{HC_FUNC4_START, HC_FUNC4_END},
-	{HC_FUNC5_START, HC_FUNC5_END},
-	{HC_FUNC6_START, HC_FUNC6_END},
-	{HC_FUNC7_START, HC_FUNC7_END}
+static const int cm_blocks[9] = {
+	MISC_BLOCK, TCM_BLOCK,  UCM_BLOCK,  CCM_BLOCK, XCM_BLOCK,
+	TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK
 };
 
 #endif /* BNX2X_INIT_H */
diff --git a/drivers/net/bnx2x_init_ops.h b/drivers/net/bnx2x_init_ops.h
new file mode 100644
index 00000000000..32552b9366c
--- /dev/null
+++ b/drivers/net/bnx2x_init_ops.h
@@ -0,0 +1,442 @@
+/* bnx2x_init_ops.h: Broadcom Everest network driver.
+ *               Static functions needed during the initialization.
+ *               This file is "included" in bnx2x_main.c.
+ *
+ * Copyright (c) 2007-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Vladislav Zolotarov <vladz@broadcom.com>
+ */
+#ifndef BNX2X_INIT_OPS_H
+#define BNX2X_INIT_OPS_H
+
+static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len);
+
+static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+			      u32 len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		REG_WR(bp, addr + i*4, data[i]);
+		if (!(i % 10000)) {
+			touch_softlockup_watchdog();
+			cpu_relax();
+		}
+	}
+}
+
+static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
+			      u16 len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		REG_WR_IND(bp, addr + i*4, data[i]);
+		if (!(i % 10000)) {
+			touch_softlockup_watchdog();
+			cpu_relax();
+		}
+	}
+}
+
+static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
+{
+	int offset = 0;
+
+	if (bp->dmae_ready) {
+		while (len > DMAE_LEN32_WR_MAX) {
+			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+					 addr + offset, DMAE_LEN32_WR_MAX);
+			offset += DMAE_LEN32_WR_MAX * 4;
+			len -= DMAE_LEN32_WR_MAX;
+		}
+		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+				 addr + offset, len);
+	} else
+		bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
+{
+	u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
+	u32 buf_len32 = buf_len / 4;
+	int i;
+
+	memset(bp->gunzip_buf, fill, buf_len);
+
+	for (i = 0; i < len; i += buf_len32) {
+		u32 cur_len = min(buf_len32, len - i);
+
+		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+	}
+}
+
+static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
+			     u32 len64)
+{
+	u32 buf_len32 = FW_BUF_SIZE / 4;
+	u32 len = len64 * 2;
+	u64 data64 = 0;
+	int i;
+
+	/* 64 bit value is in a blob: first low DWORD, then high DWORD */
+	data64 = HILO_U64((*(data + 1)), (*data));
+	len64 = min((u32)(FW_BUF_SIZE/8), len64);
+	for (i = 0; i < len64; i++) {
+		u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
+
+		*pdata = data64;
+	}
+
+	for (i = 0; i < len; i += buf_len32) {
+		u32 cur_len = min(buf_len32, len - i);
+
+		bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+	}
+}
+
+/*********************************************************
+   There are different blobs for each PRAM section.
+   In addition, each blob write operation is divided into a few operations
+   in order to decrease the amount of phys. contiguous buffer needed.
+   Thus, when we select a blob the address may be with some offset
+   from the beginning of PRAM section.
+   The same holds for the INT_TABLE sections.
+**********************************************************/
+#define IF_IS_INT_TABLE_ADDR(base, addr) \
+			if (((base) <= (addr)) && ((base) + 0x400 >= (addr)))
+
+#define IF_IS_PRAM_ADDR(base, addr) \
+			if (((base) <= (addr)) && ((base) + 0x40000 >= (addr)))
+
+static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, const u8 *data)
+{
+	IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
+		data = bp->tsem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
+		data = bp->csem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
+		data = bp->usem_int_table_data;
+	else IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
+		data = bp->xsem_int_table_data;
+	else IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
+		data = bp->tsem_pram_data;
+	else IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
+		data = bp->csem_pram_data;
+	else IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
+		data = bp->usem_pram_data;
+	else IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
+		data = bp->xsem_pram_data;
+
+	return data;
+}
+
+static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len)
+{
+	int offset = 0;
+
+	if (bp->dmae_ready) {
+		while (len > DMAE_LEN32_WR_MAX) {
+			bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+					 addr + offset, DMAE_LEN32_WR_MAX);
+			offset += DMAE_LEN32_WR_MAX * 4;
+			len -= DMAE_LEN32_WR_MAX;
+		}
+		bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
+				 addr + offset, len);
+	} else
+		bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
+}
+
+static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
+			     u32 len)
+{
+	/* This is needed for NO_ZIP mode, currently supported
+	   in little endian mode only */
+	data = (const u32*)bnx2x_sel_blob(bp, addr, (const u8*)data);
+
+	if ((len * 4) > FW_BUF_SIZE) {
+		BNX2X_ERR("LARGE DMAE OPERATION ! "
+			  "addr 0x%x  len 0x%x\n", addr, len*4);
+		return;
+	}
+	memcpy(bp->gunzip_buf, data, len * 4);
+
+	bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr,
+			     u32 len, u32 blob_off)
+{
+	int rc, i;
+        const u8 *data = NULL;
+
+	data = bnx2x_sel_blob(bp, addr, data) + 4*blob_off;
+
+	if (data == NULL) {
+		panic("Blob not found for addr 0x%x\n", addr);
+		return;
+	}
+
+	rc = bnx2x_gunzip(bp, data, len);
+	if (rc) {
+		BNX2X_ERR("gunzip failed ! addr 0x%x rc %d\n", addr, rc);
+		BNX2X_ERR("blob_offset=0x%x\n", blob_off);
+		return;
+	}
+
+	/* gunzip_outlen is in dwords */
+	len = bp->gunzip_outlen;
+	for (i = 0; i < len; i++)
+		((u32 *)bp->gunzip_buf)[i] =
+			cpu_to_le32(((u32 *)bp->gunzip_buf)[i]);
+
+	bnx2x_write_big_buf_wb(bp, addr, len);
+}
+
+static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage)
+{
+	int hw_wr, i;
+	u16 op_start =
+		bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_START)];
+	u16 op_end =
+		bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_END)];
+	union init_op *op;
+	u32 op_type, addr, len;
+	const u32 *data, *data_base;
+
+	/* If empty block */
+	if (op_start == op_end)
+		return;
+
+	if (CHIP_REV_IS_FPGA(bp))
+		hw_wr = OP_WR_FPGA;
+	else if (CHIP_REV_IS_EMUL(bp))
+		hw_wr = OP_WR_EMUL;
+	else
+		hw_wr = OP_WR_ASIC;
+
+	data_base = bp->init_data;
+
+	for (i = op_start; i < op_end; i++) {
+
+		op = (union init_op *)&(bp->init_ops[i]);
+
+		op_type = op->str_wr.op;
+		addr = op->str_wr.offset;
+		len = op->str_wr.data_len;
+		data = data_base + op->str_wr.data_off;
+
+		/* HW/EMUL specific */
+		if (unlikely((op_type > OP_WB) && (op_type == hw_wr)))
+			op_type = OP_WR;
+
+		switch (op_type) {
+		case OP_RD:
+			REG_RD(bp, addr);
+			break;
+		case OP_WR:
+			REG_WR(bp, addr, op->write.val);
+			break;
+		case OP_SW:
+			bnx2x_init_str_wr(bp, addr, data, len);
+			break;
+		case OP_WB:
+			bnx2x_init_wr_wb(bp, addr, data, len);
+			break;
+		case OP_SI:
+			bnx2x_init_ind_wr(bp, addr, data, len);
+			break;
+		case OP_ZR:
+			bnx2x_init_fill(bp, addr, 0, op->zero.len);
+			break;
+		case OP_ZP:
+			bnx2x_init_wr_zp(bp, addr, len,
+					 op->str_wr.data_off);
+			break;
+		case OP_WR_64:
+			bnx2x_init_wr_64(bp, addr, data, len);
+			break;
+		default:
+			/* happens whenever an op is of a diff HW */
+#if 0
+			DP(NETIF_MSG_HW, "skipping init operation  "
+			   "index %d[%d:%d]: type %d  addr 0x%x  "
+			   "len %d(0x%x)\n",
+			   i, op_start, op_end, op_type, addr, len, len);
+#endif
+			break;
+		}
+	}
+}
+
+/* PXP */
+static void bnx2x_init_pxp(struct bnx2x *bp)
+{
+	u16 devctl;
+	int r_order, w_order;
+	u32 val, i;
+
+	pci_read_config_word(bp->pdev,
+			     bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
+	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+	if (bp->mrrs == -1)
+		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+	else {
+		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
+		r_order = bp->mrrs;
+	}
+
+	if (r_order > MAX_RD_ORD) {
+		DP(NETIF_MSG_HW, "read order of %d  order adjusted to %d\n",
+		   r_order, MAX_RD_ORD);
+		r_order = MAX_RD_ORD;
+	}
+	if (w_order > MAX_WR_ORD) {
+		DP(NETIF_MSG_HW, "write order of %d  order adjusted to %d\n",
+		   w_order, MAX_WR_ORD);
+		w_order = MAX_WR_ORD;
+	}
+	if (CHIP_REV_IS_FPGA(bp)) {
+		DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n");
+		w_order = 0;
+	}
+	DP(NETIF_MSG_HW, "read order %d  write order %d\n", r_order, w_order);
+
+	for (i = 0; i < NUM_RD_Q-1; i++) {
+		REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l);
+		REG_WR(bp, read_arb_addr[i].add,
+		       read_arb_data[i][r_order].add);
+		REG_WR(bp, read_arb_addr[i].ubound,
+		       read_arb_data[i][r_order].ubound);
+	}
+
+	for (i = 0; i < NUM_WR_Q-1; i++) {
+		if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) ||
+		    (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) {
+
+			REG_WR(bp, write_arb_addr[i].l,
+			       write_arb_data[i][w_order].l);
+
+			REG_WR(bp, write_arb_addr[i].add,
+			       write_arb_data[i][w_order].add);
+
+			REG_WR(bp, write_arb_addr[i].ubound,
+			       write_arb_data[i][w_order].ubound);
+		} else {
+
+			val = REG_RD(bp, write_arb_addr[i].l);
+			REG_WR(bp, write_arb_addr[i].l,
+			       val | (write_arb_data[i][w_order].l << 10));
+
+			val = REG_RD(bp, write_arb_addr[i].add);
+			REG_WR(bp, write_arb_addr[i].add,
+			       val | (write_arb_data[i][w_order].add << 10));
+
+			val = REG_RD(bp, write_arb_addr[i].ubound);
+			REG_WR(bp, write_arb_addr[i].ubound,
+			       val | (write_arb_data[i][w_order].ubound << 7));
+		}
+	}
+
+	val =  write_arb_data[NUM_WR_Q-1][w_order].add;
+	val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10;
+	val += write_arb_data[NUM_WR_Q-1][w_order].l << 17;
+	REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val);
+
+	val =  read_arb_data[NUM_RD_Q-1][r_order].add;
+	val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10;
+	val += read_arb_data[NUM_RD_Q-1][r_order].l << 17;
+	REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
+
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
+	REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
+	REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
+
+	if (r_order == MAX_RD_ORD)
+		REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+	REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
+
+	if (CHIP_IS_E1H(bp)) {
+		val = ((w_order == 0) ? 2 : 3);
+		REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_QM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_TM_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_SRC_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_DBG_MPS, val);
+		REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */
+		REG_WR(bp, PXP2_REG_WR_CDU_MPS, val);
+	}
+}
+
+/*****************************************************************************
+ * Description:
+ *         Calculates crc 8 on a word value: polynomial 0-1-2-8
+ *         Code was translated from Verilog.
+ ****************************************************************************/
+static u8 calc_crc8(u32 data, u8 crc)
+{
+	u8 D[32];
+	u8 NewCRC[8];
+	u8 C[8];
+	u8 crc_res;
+	u8 i;
+
+	/* split the data into 31 bits */
+	for (i = 0; i < 32; i++) {
+		D[i] = data & 1;
+		data = data >> 1;
+	}
+
+	/* split the crc into 8 bits */
+	for (i = 0; i < 8; i++) {
+		C[i] = crc & 1;
+		crc = crc >> 1;
+	}
+
+	NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
+		D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
+		C[6] ^ C[7];
+	NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
+		D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
+		D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
+	NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
+		D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
+		C[0] ^ C[1] ^ C[4] ^ C[5];
+	NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
+		D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
+		C[1] ^ C[2] ^ C[5] ^ C[6];
+	NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
+		D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
+		C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
+	NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
+		D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
+		C[3] ^ C[4] ^ C[7];
+	NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
+		D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
+		C[5];
+	NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
+		D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
+		C[6];
+
+	crc_res = 0;
+	for (i = 0; i < 8; i++)
+		crc_res |= (NewCRC[i] << i);
+
+	return crc_res;
+}
+
+#endif /* BNX2X_INIT_OPS_H */
diff --git a/drivers/net/bnx2x_init_values.h b/drivers/net/bnx2x_init_values.h
deleted file mode 100644
index 1f22c9ab66d..00000000000
--- a/drivers/net/bnx2x_init_values.h
+++ /dev/null
@@ -1,16322 +0,0 @@
-#ifndef __BNX2X_INIT_VALUES_H__
-#define __BNX2X_INIT_VALUES_H__
-
-/* bnx2x_init_values.h: Broadcom NX2 10G network driver.
- *
- * Copyright (c) 2007-2009 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, except as noted below.
- *
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2007-2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- *
- *
- * This array contains the list of operations needed to initialize the chip.
- *
- * For each block in the chip there are three init stages:
- * common - HW used by both ports,
- * port1 and port2 - initialization for a specific Ethernet port.
- * When a port is opened or closed, the management CPU tells the driver
- * whether to init/disable common HW in addition to the port HW.
- * This way the first port going up will first initializes the common HW,
- * and the last port going down also resets the common HW
- *
- * For each init stage/block there is a list of actions needed in a format:
- * {operation, register, data}
- * where:
- * OP_WR - write a value to the chip.
- * OP_RD - read a register (usually a clear on read register).
- * OP_SW - string write, write a section of consecutive addresses to the chip.
- * OP_SI - copy a string using indirect writes.
- * OP_ZR - clear a range of memory.
- * OP_ZP - unzip and copy using DMAE.
- * OP_WB - string copy using DMAE.
- *
- * The #defines mark the stages.
- *
- */
-
-static const struct raw_op init_ops[] = {
-#define PRS_COMMON_START        0
-	{OP_WR, PRS_REG_INC_VALUE, 0xf},
-	{OP_WR, PRS_REG_EVENT_ID_1, 0x45},
-	{OP_WR, PRS_REG_EVENT_ID_2, 0x84},
-	{OP_WR, PRS_REG_EVENT_ID_3, 0x6},
-	{OP_WR, PRS_REG_NO_MATCH_EVENT_ID, 0x4},
-	{OP_WR, PRS_REG_CM_HDR_TYPE_0, 0x0},
-	{OP_WR, PRS_REG_CM_HDR_TYPE_1, 0x12170000},
-	{OP_WR, PRS_REG_CM_HDR_TYPE_2, 0x22170000},
-	{OP_WR, PRS_REG_CM_HDR_TYPE_3, 0x32170000},
-	{OP_ZR, PRS_REG_CM_HDR_TYPE_4, 0x5},
-	{OP_WR, PRS_REG_CM_HDR_LOOPBACK_TYPE_1, 0x12150000},
-	{OP_WR, PRS_REG_CM_HDR_LOOPBACK_TYPE_2, 0x22150000},
-	{OP_WR, PRS_REG_CM_HDR_LOOPBACK_TYPE_3, 0x32150000},
-	{OP_ZR, PRS_REG_CM_HDR_LOOPBACK_TYPE_4, 0x4},
-	{OP_WR, PRS_REG_CM_NO_MATCH_HDR, 0x2100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0, 0x100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1, 0x10100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2, 0x20100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3, 0x30100000},
-	{OP_ZR_E1, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4, 0x4},
-	{OP_WR_E1H, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4, 0x40100000},
-	{OP_ZR_E1H, PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5, 0x3},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0, 0x100000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1, 0x12140000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2, 0x22140000},
-	{OP_WR, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3, 0x32140000},
-	{OP_ZR_E1, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4, 0x4},
-	{OP_WR_E1H, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4, 0x42140000},
-	{OP_ZR_E1H, PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5, 0x3},
-	{OP_RD, PRS_REG_NUM_OF_PACKETS, 0x0},
-	{OP_RD, PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES, 0x0},
-	{OP_RD, PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES, 0x0},
-	{OP_RD, PRS_REG_NUM_OF_DEAD_CYCLES, 0x0},
-	{OP_WR_E1H, PRS_REG_FCOE_TYPE, 0x8906},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_0, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_1, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_2, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_3, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_4, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_5, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_6, 0xff},
-	{OP_WR, PRS_REG_FLUSH_REGIONS_TYPE_7, 0xff},
-	{OP_WR, PRS_REG_PURE_REGIONS, 0x3e},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_0, 0x0},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_1, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_2, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_3, 0x3f},
-	{OP_WR_E1, PRS_REG_PACKET_REGIONS_TYPE_4, 0x0},
-	{OP_WR_E1H, PRS_REG_PACKET_REGIONS_TYPE_4, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_5, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_6, 0x3f},
-	{OP_WR, PRS_REG_PACKET_REGIONS_TYPE_7, 0x3f},
-#define PRS_COMMON_END          52
-#define SRCH_COMMON_START       52
-	{OP_WR_E1H, SRC_REG_E1HMF_ENABLE, 0x1},
-#define SRCH_COMMON_END         53
-#define TSDM_COMMON_START       53
-	{OP_WR_E1, TSDM_REG_CFC_RSP_START_ADDR, 0x411},
-	{OP_WR_E1H, TSDM_REG_CFC_RSP_START_ADDR, 0x211},
-	{OP_WR_E1, TSDM_REG_CMP_COUNTER_START_ADDR, 0x400},
-	{OP_WR_E1H, TSDM_REG_CMP_COUNTER_START_ADDR, 0x200},
-	{OP_WR_E1, TSDM_REG_Q_COUNTER_START_ADDR, 0x404},
-	{OP_WR_E1H, TSDM_REG_Q_COUNTER_START_ADDR, 0x204},
-	{OP_WR_E1, TSDM_REG_PCK_END_MSG_START_ADDR, 0x419},
-	{OP_WR_E1H, TSDM_REG_PCK_END_MSG_START_ADDR, 0x219},
-	{OP_WR, TSDM_REG_CMP_COUNTER_MAX0, 0xffff},
-	{OP_WR, TSDM_REG_CMP_COUNTER_MAX1, 0xffff},
-	{OP_WR, TSDM_REG_CMP_COUNTER_MAX2, 0xffff},
-	{OP_WR, TSDM_REG_CMP_COUNTER_MAX3, 0xffff},
-	{OP_ZR_E1, TSDM_REG_AGG_INT_EVENT_0, 0x2},
-	{OP_WR_E1H, TSDM_REG_AGG_INT_EVENT_0, 0x20},
-	{OP_WR_E1H, TSDM_REG_AGG_INT_EVENT_1, 0x0},
-	{OP_WR, TSDM_REG_AGG_INT_EVENT_2, 0x34},
-	{OP_WR, TSDM_REG_AGG_INT_EVENT_3, 0x35},
-	{OP_ZR_E1, TSDM_REG_AGG_INT_EVENT_4, 0x7c},
-	{OP_ZR_E1H, TSDM_REG_AGG_INT_EVENT_4, 0x1c},
-	{OP_WR_E1H, TSDM_REG_AGG_INT_T_0, 0x1},
-	{OP_ZR_E1H, TSDM_REG_AGG_INT_T_1, 0x5f},
-	{OP_WR, TSDM_REG_ENABLE_IN1, 0x7ffffff},
-	{OP_WR, TSDM_REG_ENABLE_IN2, 0x3f},
-	{OP_WR, TSDM_REG_ENABLE_OUT1, 0x7ffffff},
-	{OP_WR, TSDM_REG_ENABLE_OUT2, 0xf},
-	{OP_RD, TSDM_REG_NUM_OF_Q0_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q1_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q3_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q4_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q5_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q6_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q7_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q8_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q9_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q10_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_Q11_CMD, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_PKT_END_MSG, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_PXP_ASYNC_REQ, 0x0},
-	{OP_RD, TSDM_REG_NUM_OF_ACK_AFTER_PLACE, 0x0},
-	{OP_WR_E1, TSDM_REG_INIT_CREDIT_PXP_CTRL, 0x1},
-	{OP_WR_ASIC, TSDM_REG_TIMER_TICK, 0x3e8},
-	{OP_WR_EMUL, TSDM_REG_TIMER_TICK, 0x1},
-	{OP_WR_FPGA, TSDM_REG_TIMER_TICK, 0xa},
-#define TSDM_COMMON_END         96
-#define TCM_COMMON_START        96
-	{OP_WR, TCM_REG_XX_MAX_LL_SZ, 0x20},
-	{OP_WR, TCM_REG_XX_OVFL_EVNT_ID, 0x32},
-	{OP_WR, TCM_REG_TQM_TCM_HDR_P, 0x2150020},
-	{OP_WR, TCM_REG_TQM_TCM_HDR_S, 0x2150020},
-	{OP_WR, TCM_REG_TM_TCM_HDR, 0x30},
-	{OP_WR, TCM_REG_ERR_TCM_HDR, 0x8100000},
-	{OP_WR, TCM_REG_ERR_EVNT_ID, 0x33},
-	{OP_WR, TCM_REG_EXPR_EVNT_ID, 0x30},
-	{OP_WR, TCM_REG_STOP_EVNT_ID, 0x31},
-	{OP_WR, TCM_REG_STORM_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_PRS_WEIGHT, 0x5},
-	{OP_WR, TCM_REG_PBF_WEIGHT, 0x6},
-	{OP_WR, TCM_REG_USEM_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_CSEM_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_CP_WEIGHT, 0x0},
-	{OP_WR, TCM_REG_TSDM_WEIGHT, 0x5},
-	{OP_WR, TCM_REG_TQM_P_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_TQM_S_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_TM_WEIGHT, 0x2},
-	{OP_WR, TCM_REG_TCM_TQM_USE_Q, 0x1},
-	{OP_WR, TCM_REG_GR_ARB_TYPE, 0x1},
-	{OP_WR, TCM_REG_GR_LD0_PR, 0x1},
-	{OP_WR, TCM_REG_GR_LD1_PR, 0x2},
-	{OP_WR, TCM_REG_CFC_INIT_CRD, 0x1},
-	{OP_WR, TCM_REG_FIC0_INIT_CRD, 0x40},
-	{OP_WR, TCM_REG_FIC1_INIT_CRD, 0x40},
-	{OP_WR, TCM_REG_TQM_INIT_CRD, 0x20},
-	{OP_WR, TCM_REG_XX_INIT_CRD, 0x13},
-	{OP_WR, TCM_REG_XX_MSG_NUM, 0x20},
-	{OP_ZR, TCM_REG_XX_TABLE, 0xa},
-	{OP_SW, TCM_REG_XX_DESCR_TABLE, 0x200000},
-	{OP_WR, TCM_REG_N_SM_CTX_LD_0, 0x7},
-	{OP_WR, TCM_REG_N_SM_CTX_LD_1, 0x7},
-	{OP_WR, TCM_REG_N_SM_CTX_LD_2, 0x8},
-	{OP_WR, TCM_REG_N_SM_CTX_LD_3, 0x8},
-	{OP_ZR_E1, TCM_REG_N_SM_CTX_LD_4, 0x4},
-	{OP_WR_E1H, TCM_REG_N_SM_CTX_LD_4, 0x1},
-	{OP_ZR_E1H, TCM_REG_N_SM_CTX_LD_5, 0x3},
-	{OP_WR, TCM_REG_TCM_REG0_SZ, 0x6},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM0_0, 0xd},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM0_1, 0x2d},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM1_0, 0x7},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM1_1, 0x27},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM2_0, 0x7},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM2_1, 0x27},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM3_0, 0x7},
-	{OP_WR_E1, TCM_REG_PHYS_QNUM3_1, 0x27},
-	{OP_WR, TCM_REG_TCM_STORM0_IFEN, 0x1},
-	{OP_WR, TCM_REG_TCM_STORM1_IFEN, 0x1},
-	{OP_WR, TCM_REG_TCM_TQM_IFEN, 0x1},
-	{OP_WR, TCM_REG_STORM_TCM_IFEN, 0x1},
-	{OP_WR, TCM_REG_TQM_TCM_IFEN, 0x1},
-	{OP_WR, TCM_REG_TSDM_IFEN, 0x1},
-	{OP_WR, TCM_REG_TM_TCM_IFEN, 0x1},
-	{OP_WR, TCM_REG_PRS_IFEN, 0x1},
-	{OP_WR, TCM_REG_PBF_IFEN, 0x1},
-	{OP_WR, TCM_REG_USEM_IFEN, 0x1},
-	{OP_WR, TCM_REG_CSEM_IFEN, 0x1},
-	{OP_WR, TCM_REG_CDU_AG_WR_IFEN, 0x1},
-	{OP_WR, TCM_REG_CDU_AG_RD_IFEN, 0x1},
-	{OP_WR, TCM_REG_CDU_SM_WR_IFEN, 0x1},
-	{OP_WR, TCM_REG_CDU_SM_RD_IFEN, 0x1},
-	{OP_WR, TCM_REG_TCM_CFC_IFEN, 0x1},
-#define TCM_COMMON_END          159
-#define TCM_FUNC0_START         159
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_0, 0xd},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_0, 0x7},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_0, 0x7},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_0, 0x7},
-#define TCM_FUNC0_END           163
-#define TCM_FUNC1_START         163
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_1, 0x2d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_1, 0x27},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_1, 0x27},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_1, 0x27},
-#define TCM_FUNC1_END           167
-#define TCM_FUNC2_START         167
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_0, 0x1d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_0, 0x17},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_0, 0x17},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_0, 0x17},
-#define TCM_FUNC2_END           171
-#define TCM_FUNC3_START         171
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_1, 0x3d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_1, 0x37},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_1, 0x37},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_1, 0x37},
-#define TCM_FUNC3_END           175
-#define TCM_FUNC4_START         175
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_0, 0x4d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_0, 0x47},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_0, 0x47},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_0, 0x47},
-#define TCM_FUNC4_END           179
-#define TCM_FUNC5_START         179
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_1, 0x6d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_1, 0x67},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_1, 0x67},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_1, 0x67},
-#define TCM_FUNC5_END           183
-#define TCM_FUNC6_START         183
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_0, 0x5d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_0, 0x57},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_0, 0x57},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_0, 0x57},
-#define TCM_FUNC6_END           187
-#define TCM_FUNC7_START         187
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM0_1, 0x7d},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM1_1, 0x77},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM2_1, 0x77},
-	{OP_WR_E1H, TCM_REG_PHYS_QNUM3_1, 0x77},
-#define TCM_FUNC7_END           191
-#define BRB1_COMMON_START       191
-	{OP_SW, BRB1_REG_LL_RAM, 0x2000020},
-	{OP_WR, BRB1_REG_SOFT_RESET, 0x1},
-	{OP_RD, BRB1_REG_NUM_OF_FULL_CYCLES_4, 0x0},
-	{OP_SW, BRB1_REG_FREE_LIST_PRS_CRDT, 0x30220},
-	{OP_WR, BRB1_REG_SOFT_RESET, 0x0},
-#define BRB1_COMMON_END         196
-#define BRB1_PORT0_START        196
-	{OP_WR_E1, BRB1_REG_PAUSE_LOW_THRESHOLD_0, 0xb8},
-	{OP_WR_E1, BRB1_REG_PAUSE_HIGH_THRESHOLD_0, 0x114},
-	{OP_RD, BRB1_REG_NUM_OF_PAUSE_CYCLES_0, 0x0},
-	{OP_RD, BRB1_REG_NUM_OF_FULL_CYCLES_0, 0x0},
-#define BRB1_PORT0_END          200
-#define BRB1_PORT1_START        200
-	{OP_WR_E1, BRB1_REG_PAUSE_LOW_THRESHOLD_1, 0xb8},
-	{OP_WR_E1, BRB1_REG_PAUSE_HIGH_THRESHOLD_1, 0x114},
-	{OP_RD, BRB1_REG_NUM_OF_PAUSE_CYCLES_1, 0x0},
-	{OP_RD, BRB1_REG_NUM_OF_FULL_CYCLES_1, 0x0},
-#define BRB1_PORT1_END          204
-#define TSEM_COMMON_START       204
-	{OP_RD, TSEM_REG_MSG_NUM_FIC0, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FIC1, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FOC0, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FOC1, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FOC2, 0x0},
-	{OP_RD, TSEM_REG_MSG_NUM_FOC3, 0x0},
-	{OP_WR, TSEM_REG_ARB_ELEMENT0, 0x1},
-	{OP_WR, TSEM_REG_ARB_ELEMENT1, 0x2},
-	{OP_WR, TSEM_REG_ARB_ELEMENT2, 0x3},
-	{OP_WR, TSEM_REG_ARB_ELEMENT3, 0x0},
-	{OP_WR, TSEM_REG_ARB_ELEMENT4, 0x4},
-	{OP_WR, TSEM_REG_ARB_CYCLE_SIZE, 0x1},
-	{OP_WR, TSEM_REG_TS_0_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_1_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_2_AS, 0x4},
-	{OP_WR, TSEM_REG_TS_3_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_4_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_5_AS, 0x3},
-	{OP_WR, TSEM_REG_TS_6_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_7_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_8_AS, 0x4},
-	{OP_WR, TSEM_REG_TS_9_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_10_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_11_AS, 0x3},
-	{OP_WR, TSEM_REG_TS_12_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_13_AS, 0x1},
-	{OP_WR, TSEM_REG_TS_14_AS, 0x4},
-	{OP_WR, TSEM_REG_TS_15_AS, 0x0},
-	{OP_WR, TSEM_REG_TS_16_AS, 0x4},
-	{OP_WR, TSEM_REG_TS_17_AS, 0x3},
-	{OP_ZR, TSEM_REG_TS_18_AS, 0x2},
-	{OP_WR, TSEM_REG_ENABLE_IN, 0x3fff},
-	{OP_WR, TSEM_REG_ENABLE_OUT, 0x3ff},
-	{OP_WR, TSEM_REG_FIC0_DISABLE, 0x0},
-	{OP_WR, TSEM_REG_FIC1_DISABLE, 0x0},
-	{OP_WR, TSEM_REG_PAS_DISABLE, 0x0},
-	{OP_WR, TSEM_REG_THREADS_LIST, 0xff},
-	{OP_ZR, TSEM_REG_PASSIVE_BUFFER, 0x400},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x18bc0, 0x1},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x18000, 0x34},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x18040, 0x18},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x18080, 0xc},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x180c0, 0x20},
-	{OP_WR_ASIC, TSEM_REG_FAST_MEMORY + 0x18300, 0x7a120},
-	{OP_WR_EMUL, TSEM_REG_FAST_MEMORY + 0x18300, 0x138},
-	{OP_WR_FPGA, TSEM_REG_FAST_MEMORY + 0x18300, 0x1388},
-	{OP_WR, TSEM_REG_FAST_MEMORY + 0x183c0, 0x1f4},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x2000, 0xb2},
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x11480, 0x1},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x23c8, 0xc1},
-	{OP_WR_EMUL_E1H, TSEM_REG_FAST_MEMORY + 0x11480, 0x0},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x23c8 + 0x304, 0x10223},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x1000, 0x2b3},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1020, 0xc8},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x1000 + 0xacc, 0x10223},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1000, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xa020, 0xc8},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1c18, 0x4},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xa000, 0x2},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1c10, 0x2},
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x1ad0, 0x0},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x800, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x1ad8, 0x4},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x808, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3678, 0x6},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x810, 0x4},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3670, 0x2},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1fb0, 0x40224},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5000, 0x2},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x4cb0, 0x80228},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5008, 0x4},
-	{OP_ZP_E1, TSEM_REG_INT_TABLE, 0x930000},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5018, 0x4},
-	{OP_WR_64_E1, TSEM_REG_INT_TABLE + 0x360, 0x140230},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5028, 0x4},
-	{OP_ZP_E1, TSEM_REG_PRAM, 0x324f0000},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5038, 0x4},
-	{OP_ZP_E1, TSEM_REG_PRAM + 0x8000, 0x33250c94},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5048, 0x4},
-	{OP_ZP_E1, TSEM_REG_PRAM + 0x10000, 0xe4d195e},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5058, 0x4},
-	{OP_WR_64_E1, TSEM_REG_PRAM + 0x11e00, 0x5c400232},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5068, 0x4},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5078, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x4000, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x4008, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x62c0, 0x200224},
-	{OP_ZP_E1H, TSEM_REG_INT_TABLE, 0x9b0000},
-	{OP_WR_64_E1H, TSEM_REG_INT_TABLE + 0x398, 0xd0244},
-	{OP_ZP_E1H, TSEM_REG_PRAM, 0x325e0000},
-	{OP_ZP_E1H, TSEM_REG_PRAM + 0x8000, 0x35960c98},
-	{OP_ZP_E1H, TSEM_REG_PRAM + 0x10000, 0x1aea19fe},
-	{OP_WR_64_E1H, TSEM_REG_PRAM + 0x143d0, 0x57860246},
-#define TSEM_COMMON_END         297
-#define TSEM_PORT0_START        297
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x22c8, 0x20},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x2000, 0x16c},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x4000, 0x16c},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xb000, 0x28},
-	{OP_WR_E1, TSEM_REG_FAST_MEMORY + 0x4b60, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xb140, 0xc},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1400, 0xa},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x32c0, 0x12},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1450, 0x6},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3350, 0x64},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1500, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x8108, 0x2},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1500 + 0x8, 0x50234},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1500 + 0x1c, 0x7},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1570, 0x12},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x9c0, 0x4c},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x800, 0x2},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x820, 0xe},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1fb0, 0x20239},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x2908, 0x2},
-#define TSEM_PORT0_END          317
-#define TSEM_PORT1_START        317
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x2348, 0x20},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x25b0, 0x16c},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x45b0, 0x16c},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xb0a0, 0x28},
-	{OP_WR_E1, TSEM_REG_FAST_MEMORY + 0x4b64, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0xb170, 0xc},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1428, 0xa},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3308, 0x12},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1468, 0x6},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x34e0, 0x64},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1538, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x8110, 0x2},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1538 + 0x8, 0x5023b},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x1538 + 0x1c, 0x7},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x15b8, 0x12},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0xaf0, 0x4c},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x808, 0x2},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x858, 0xe},
-	{OP_SW_E1, TSEM_REG_FAST_MEMORY + 0x1fb8, 0x20240},
-	{OP_ZR_E1, TSEM_REG_FAST_MEMORY + 0x2910, 0x2},
-#define TSEM_PORT1_END          337
-#define TSEM_FUNC0_START        337
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b60, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3000, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3000 + 0x8, 0x50248},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3000 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x31c0, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5000, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5080, 0x12},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x4000, 0x2},
-#define TSEM_FUNC0_END          345
-#define TSEM_FUNC1_START        345
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b64, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3038, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3038 + 0x8, 0x5024d},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3038 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x31e0, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5010, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x50c8, 0x12},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x4008, 0x2},
-#define TSEM_FUNC1_END          353
-#define TSEM_FUNC2_START        353
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b68, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3070, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3070 + 0x8, 0x50252},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3070 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3200, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5020, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5110, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4010, 0x20257},
-#define TSEM_FUNC2_END          361
-#define TSEM_FUNC3_START        361
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b6c, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x30a8, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x30a8 + 0x8, 0x50259},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x30a8 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3220, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5030, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5158, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4018, 0x2025e},
-#define TSEM_FUNC3_END          369
-#define TSEM_FUNC4_START        369
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b70, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x30e0, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x30e0 + 0x8, 0x50260},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x30e0 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3240, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5040, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x51a0, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4020, 0x20265},
-#define TSEM_FUNC4_END          377
-#define TSEM_FUNC5_START        377
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b74, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3118, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3118 + 0x8, 0x50267},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3118 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3260, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5050, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x51e8, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4028, 0x2026c},
-#define TSEM_FUNC5_END          385
-#define TSEM_FUNC6_START        385
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b78, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3150, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3150 + 0x8, 0x5026e},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3150 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3280, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5060, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5230, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4030, 0x20273},
-#define TSEM_FUNC6_END          393
-#define TSEM_FUNC7_START        393
-	{OP_WR_E1H, TSEM_REG_FAST_MEMORY + 0x2b7c, 0x0},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3188, 0x2},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x3188 + 0x8, 0x50275},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x3188 + 0x1c, 0x7},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x32a0, 0x8},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5070, 0x2},
-	{OP_ZR_E1H, TSEM_REG_FAST_MEMORY + 0x5278, 0x12},
-	{OP_SW_E1H, TSEM_REG_FAST_MEMORY + 0x4038, 0x2027a},
-#define TSEM_FUNC7_END          401
-#define MISC_COMMON_START       401
-	{OP_WR_E1, MISC_REG_GRC_TIMEOUT_EN, 0x1},
-	{OP_WR, MISC_REG_PLL_STORM_CTRL_1, 0x71d2911},
-	{OP_WR, MISC_REG_PLL_STORM_CTRL_2, 0x0},
-	{OP_WR, MISC_REG_PLL_STORM_CTRL_3, 0x9c0424},
-	{OP_WR, MISC_REG_PLL_STORM_CTRL_4, 0x0},
-	{OP_WR, MISC_REG_LCPLL_CTRL_1, 0x209},
-	{OP_WR_E1, MISC_REG_SPIO, 0xff000000},
-#define MISC_COMMON_END         408
-#define MISC_FUNC0_START        408
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P0, 0x0},
-#define MISC_FUNC0_END          409
-#define MISC_FUNC1_START        409
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P1, 0x0},
-#define MISC_FUNC1_END          410
-#define MISC_FUNC2_START        410
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P0, 0x0},
-#define MISC_FUNC2_END          411
-#define MISC_FUNC3_START        411
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P1, 0x0},
-#define MISC_FUNC3_END          412
-#define MISC_FUNC4_START        412
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P0, 0x0},
-#define MISC_FUNC4_END          413
-#define MISC_FUNC5_START        413
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P1, 0x0},
-#define MISC_FUNC5_END          414
-#define MISC_FUNC6_START        414
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P0, 0x0},
-#define MISC_FUNC6_END          415
-#define MISC_FUNC7_START        415
-	{OP_WR_E1H, MISC_REG_NIG_WOL_P1, 0x0},
-#define MISC_FUNC7_END          416
-#define NIG_COMMON_START        416
-	{OP_WR, NIG_REG_PBF_LB_IN_EN, 0x1},
-	{OP_WR, NIG_REG_PRS_REQ_IN_EN, 0x1},
-	{OP_WR, NIG_REG_EGRESS_DEBUG_IN_EN, 0x1},
-	{OP_WR, NIG_REG_BRB_LB_OUT_EN, 0x1},
-	{OP_WR, NIG_REG_PRS_EOP_OUT_EN, 0x1},
-#define NIG_COMMON_END          421
-#define NIG_PORT0_START         421
-	{OP_WR, NIG_REG_LLH0_CM_HEADER, 0x300000},
-	{OP_WR, NIG_REG_LLH0_EVENT_ID, 0x28},
-	{OP_WR, NIG_REG_LLH0_ERROR_MASK, 0x0},
-	{OP_WR, NIG_REG_LLH0_XCM_MASK, 0x4},
-	{OP_WR, NIG_REG_LLH0_BRB1_NOT_MCP, 0x1},
-	{OP_WR, NIG_REG_STATUS_INTERRUPT_PORT0, 0x0},
-	{OP_WR_E1H, NIG_REG_LLH0_CLS_TYPE, 0x1},
-	{OP_WR, NIG_REG_LLH0_XCM_INIT_CREDIT, 0x30},
-	{OP_WR, NIG_REG_BRB0_PAUSE_IN_EN, 0x1},
-	{OP_WR, NIG_REG_EGRESS_PBF0_IN_EN, 0x1},
-	{OP_WR, NIG_REG_BRB0_OUT_EN, 0x1},
-	{OP_WR, NIG_REG_XCM0_OUT_EN, 0x1},
-#define NIG_PORT0_END           433
-#define NIG_PORT1_START         433
-	{OP_WR, NIG_REG_LLH1_CM_HEADER, 0x300000},
-	{OP_WR, NIG_REG_LLH1_EVENT_ID, 0x28},
-	{OP_WR, NIG_REG_LLH1_ERROR_MASK, 0x0},
-	{OP_WR, NIG_REG_LLH1_XCM_MASK, 0x4},
-	{OP_WR, NIG_REG_LLH1_BRB1_NOT_MCP, 0x1},
-	{OP_WR, NIG_REG_STATUS_INTERRUPT_PORT1, 0x0},
-	{OP_WR_E1H, NIG_REG_LLH1_CLS_TYPE, 0x1},
-	{OP_WR, NIG_REG_LLH1_XCM_INIT_CREDIT, 0x30},
-	{OP_WR, NIG_REG_BRB1_PAUSE_IN_EN, 0x1},
-	{OP_WR, NIG_REG_EGRESS_PBF1_IN_EN, 0x1},
-	{OP_WR, NIG_REG_BRB1_OUT_EN, 0x1},
-	{OP_WR, NIG_REG_XCM1_OUT_EN, 0x1},
-#define NIG_PORT1_END           445
-#define UPB_COMMON_START        445
-	{OP_WR, GRCBASE_UPB + PB_REG_CONTROL, 0x20},
-#define UPB_COMMON_END          446
-#define CSDM_COMMON_START       446
-	{OP_WR_E1, CSDM_REG_CFC_RSP_START_ADDR, 0xa11},
-	{OP_WR_E1H, CSDM_REG_CFC_RSP_START_ADDR, 0x211},
-	{OP_WR_E1, CSDM_REG_CMP_COUNTER_START_ADDR, 0xa00},
-	{OP_WR_E1H, CSDM_REG_CMP_COUNTER_START_ADDR, 0x200},
-	{OP_WR_E1, CSDM_REG_Q_COUNTER_START_ADDR, 0xa04},
-	{OP_WR_E1H, CSDM_REG_Q_COUNTER_START_ADDR, 0x204},
-	{OP_WR, CSDM_REG_CMP_COUNTER_MAX0, 0xffff},
-	{OP_WR, CSDM_REG_CMP_COUNTER_MAX1, 0xffff},
-	{OP_WR, CSDM_REG_CMP_COUNTER_MAX2, 0xffff},
-	{OP_WR, CSDM_REG_CMP_COUNTER_MAX3, 0xffff},
-	{OP_WR, CSDM_REG_AGG_INT_EVENT_0, 0xc6},
-	{OP_WR, CSDM_REG_AGG_INT_EVENT_1, 0x0},
-	{OP_WR, CSDM_REG_AGG_INT_EVENT_2, 0x34},
-	{OP_WR, CSDM_REG_AGG_INT_EVENT_3, 0x35},
-	{OP_ZR, CSDM_REG_AGG_INT_EVENT_4, 0x1c},
-	{OP_WR, CSDM_REG_AGG_INT_T_0, 0x1},
-	{OP_ZR, CSDM_REG_AGG_INT_T_1, 0x5f},
-	{OP_WR, CSDM_REG_ENABLE_IN1, 0x7ffffff},
-	{OP_WR, CSDM_REG_ENABLE_IN2, 0x3f},
-	{OP_WR, CSDM_REG_ENABLE_OUT1, 0x7ffffff},
-	{OP_WR, CSDM_REG_ENABLE_OUT2, 0xf},
-	{OP_RD, CSDM_REG_NUM_OF_Q0_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q1_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q3_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q4_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q5_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q6_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q7_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q8_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q9_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q10_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_Q11_CMD, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_PKT_END_MSG, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_PXP_ASYNC_REQ, 0x0},
-	{OP_RD, CSDM_REG_NUM_OF_ACK_AFTER_PLACE, 0x0},
-	{OP_WR_E1, CSDM_REG_INIT_CREDIT_PXP_CTRL, 0x1},
-	{OP_WR_ASIC, CSDM_REG_TIMER_TICK, 0x3e8},
-	{OP_WR_EMUL, CSDM_REG_TIMER_TICK, 0x1},
-	{OP_WR_FPGA, CSDM_REG_TIMER_TICK, 0xa},
-#define CSDM_COMMON_END         485
-#define USDM_COMMON_START       485
-	{OP_WR_E1, USDM_REG_CFC_RSP_START_ADDR, 0xa11},
-	{OP_WR_E1H, USDM_REG_CFC_RSP_START_ADDR, 0x411},
-	{OP_WR_E1, USDM_REG_CMP_COUNTER_START_ADDR, 0xa00},
-	{OP_WR_E1H, USDM_REG_CMP_COUNTER_START_ADDR, 0x400},
-	{OP_WR_E1, USDM_REG_Q_COUNTER_START_ADDR, 0xa04},
-	{OP_WR_E1H, USDM_REG_Q_COUNTER_START_ADDR, 0x404},
-	{OP_WR_E1, USDM_REG_PCK_END_MSG_START_ADDR, 0xa21},
-	{OP_WR_E1H, USDM_REG_PCK_END_MSG_START_ADDR, 0x421},
-	{OP_WR, USDM_REG_CMP_COUNTER_MAX0, 0xffff},
-	{OP_WR, USDM_REG_CMP_COUNTER_MAX1, 0xffff},
-	{OP_WR, USDM_REG_CMP_COUNTER_MAX2, 0xffff},
-	{OP_WR, USDM_REG_CMP_COUNTER_MAX3, 0xffff},
-	{OP_WR, USDM_REG_AGG_INT_EVENT_0, 0x46},
-	{OP_WR, USDM_REG_AGG_INT_EVENT_1, 0x5},
-	{OP_WR, USDM_REG_AGG_INT_EVENT_2, 0x34},
-	{OP_WR, USDM_REG_AGG_INT_EVENT_3, 0x35},
-	{OP_ZR_E1, USDM_REG_AGG_INT_EVENT_4, 0x5c},
-	{OP_WR_E1H, USDM_REG_AGG_INT_EVENT_4, 0x7},
-	{OP_ZR_E1H, USDM_REG_AGG_INT_EVENT_5, 0x5b},
-	{OP_WR, USDM_REG_AGG_INT_MODE_0, 0x1},
-	{OP_ZR_E1, USDM_REG_AGG_INT_MODE_1, 0x1f},
-	{OP_ZR_E1H, USDM_REG_AGG_INT_MODE_1, 0x3},
-	{OP_WR_E1H, USDM_REG_AGG_INT_MODE_4, 0x1},
-	{OP_ZR_E1H, USDM_REG_AGG_INT_MODE_5, 0x1b},
-	{OP_WR, USDM_REG_ENABLE_IN1, 0x7ffffff},
-	{OP_WR, USDM_REG_ENABLE_IN2, 0x3f},
-	{OP_WR, USDM_REG_ENABLE_OUT1, 0x7ffffff},
-	{OP_WR, USDM_REG_ENABLE_OUT2, 0xf},
-	{OP_RD, USDM_REG_NUM_OF_Q0_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q1_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q2_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q3_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q4_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q5_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q6_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q7_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q8_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q9_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q10_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_Q11_CMD, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_PKT_END_MSG, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_PXP_ASYNC_REQ, 0x0},
-	{OP_RD, USDM_REG_NUM_OF_ACK_AFTER_PLACE, 0x0},
-	{OP_WR_E1, USDM_REG_INIT_CREDIT_PXP_CTRL, 0x1},
-	{OP_WR_ASIC, USDM_REG_TIMER_TICK, 0x3e8},
-	{OP_WR_EMUL, USDM_REG_TIMER_TICK, 0x1},
-	{OP_WR_FPGA, USDM_REG_TIMER_TICK, 0xa},
-#define USDM_COMMON_END         532
-#define CCM_COMMON_START        532
-	{OP_WR, CCM_REG_XX_OVFL_EVNT_ID, 0x32},
-	{OP_WR, CCM_REG_CQM_CCM_HDR_P, 0x2150020},
-	{OP_WR, CCM_REG_CQM_CCM_HDR_S, 0x2150020},
-	{OP_WR, CCM_REG_ERR_CCM_HDR, 0x8100000},
-	{OP_WR, CCM_REG_ERR_EVNT_ID, 0x33},
-	{OP_WR, CCM_REG_STORM_WEIGHT, 0x2},
-	{OP_WR, CCM_REG_TSEM_WEIGHT, 0x0},
-	{OP_WR, CCM_REG_XSEM_WEIGHT, 0x5},
-	{OP_WR, CCM_REG_USEM_WEIGHT, 0x5},
-	{OP_ZR, CCM_REG_PBF_WEIGHT, 0x2},
-	{OP_WR, CCM_REG_CSDM_WEIGHT, 0x2},
-	{OP_WR, CCM_REG_CQM_P_WEIGHT, 0x3},
-	{OP_WR, CCM_REG_CQM_S_WEIGHT, 0x2},
-	{OP_WR, CCM_REG_CCM_CQM_USE_Q, 0x1},
-	{OP_WR, CCM_REG_CNT_AUX1_Q, 0x2},
-	{OP_WR, CCM_REG_CNT_AUX2_Q, 0x2},
-	{OP_WR, CCM_REG_INV_DONE_Q, 0x1},
-	{OP_WR, CCM_REG_GR_ARB_TYPE, 0x1},
-	{OP_WR, CCM_REG_GR_LD0_PR, 0x1},
-	{OP_WR, CCM_REG_GR_LD1_PR, 0x2},
-	{OP_WR, CCM_REG_CFC_INIT_CRD, 0x1},
-	{OP_WR, CCM_REG_CQM_INIT_CRD, 0x20},
-	{OP_WR, CCM_REG_FIC0_INIT_CRD, 0x40},
-	{OP_WR, CCM_REG_FIC1_INIT_CRD, 0x40},
-	{OP_WR, CCM_REG_XX_INIT_CRD, 0x3},
-	{OP_WR, CCM_REG_XX_MSG_NUM, 0x18},
-	{OP_ZR, CCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, CCM_REG_XX_DESCR_TABLE, 0x240242},
-	{OP_SW_E1H, CCM_REG_XX_DESCR_TABLE, 0x24027c},
-	{OP_WR, CCM_REG_N_SM_CTX_LD_0, 0x1},
-	{OP_WR, CCM_REG_N_SM_CTX_LD_1, 0x2},
-	{OP_WR, CCM_REG_N_SM_CTX_LD_2, 0x8},
-	{OP_WR, CCM_REG_N_SM_CTX_LD_3, 0x8},
-	{OP_ZR, CCM_REG_N_SM_CTX_LD_4, 0x4},
-	{OP_WR, CCM_REG_CCM_REG0_SZ, 0x4},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM0_0, 0x9},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM0_1, 0x29},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM1_0, 0xa},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM1_1, 0x2a},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM2_0, 0x7},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM2_1, 0x27},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM3_0, 0x7},
-	{OP_WR_E1, CCM_REG_QOS_PHYS_QNUM3_1, 0x27},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM1_0, 0xc},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM1_1, 0x2c},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM2_0, 0xc},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM2_1, 0x2c},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM3_0, 0xc},
-	{OP_WR_E1, CCM_REG_PHYS_QNUM3_1, 0x2c},
-	{OP_WR, CCM_REG_CCM_STORM0_IFEN, 0x1},
-	{OP_WR, CCM_REG_CCM_STORM1_IFEN, 0x1},
-	{OP_WR, CCM_REG_CCM_CQM_IFEN, 0x1},
-	{OP_WR, CCM_REG_STORM_CCM_IFEN, 0x1},
-	{OP_WR, CCM_REG_CQM_CCM_IFEN, 0x1},
-	{OP_WR, CCM_REG_CSDM_IFEN, 0x1},
-	{OP_WR, CCM_REG_TSEM_IFEN, 0x1},
-	{OP_WR, CCM_REG_XSEM_IFEN, 0x1},
-	{OP_WR, CCM_REG_USEM_IFEN, 0x1},
-	{OP_WR, CCM_REG_PBF_IFEN, 0x1},
-	{OP_WR, CCM_REG_CDU_AG_WR_IFEN, 0x1},
-	{OP_WR, CCM_REG_CDU_AG_RD_IFEN, 0x1},
-	{OP_WR, CCM_REG_CDU_SM_WR_IFEN, 0x1},
-	{OP_WR, CCM_REG_CDU_SM_RD_IFEN, 0x1},
-	{OP_WR, CCM_REG_CCM_CFC_IFEN, 0x1},
-#define CCM_COMMON_END          596
-#define CCM_FUNC0_START         596
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_0, 0x9},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_0, 0xa},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_0, 0x7},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_0, 0x7},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_0, 0xc},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_0, 0xb},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_0, 0x7},
-#define CCM_FUNC0_END           603
-#define CCM_FUNC1_START         603
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_1, 0x29},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_1, 0x2a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_1, 0x27},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_1, 0x27},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_1, 0x2c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_1, 0x2b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_1, 0x27},
-#define CCM_FUNC1_END           610
-#define CCM_FUNC2_START         610
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_0, 0x19},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_0, 0x1a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_0, 0x17},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_0, 0x17},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_0, 0x1c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_0, 0x1b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_0, 0x17},
-#define CCM_FUNC2_END           617
-#define CCM_FUNC3_START         617
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_1, 0x39},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_1, 0x3a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_1, 0x37},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_1, 0x37},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_1, 0x3c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_1, 0x3b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_1, 0x37},
-#define CCM_FUNC3_END           624
-#define CCM_FUNC4_START         624
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_0, 0x49},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_0, 0x4a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_0, 0x47},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_0, 0x47},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_0, 0x4c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_0, 0x4b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_0, 0x47},
-#define CCM_FUNC4_END           631
-#define CCM_FUNC5_START         631
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_1, 0x69},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_1, 0x6a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_1, 0x67},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_1, 0x67},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_1, 0x6c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_1, 0x6b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_1, 0x67},
-#define CCM_FUNC5_END           638
-#define CCM_FUNC6_START         638
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_0, 0x59},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_0, 0x5a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_0, 0x57},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_0, 0x57},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_0, 0x5c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_0, 0x5b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_0, 0x57},
-#define CCM_FUNC6_END           645
-#define CCM_FUNC7_START         645
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM0_1, 0x79},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM1_1, 0x7a},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM2_1, 0x77},
-	{OP_WR_E1H, CCM_REG_QOS_PHYS_QNUM3_1, 0x77},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM1_1, 0x7c},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM2_1, 0x7b},
-	{OP_WR_E1H, CCM_REG_PHYS_QNUM3_1, 0x77},
-#define CCM_FUNC7_END           652
-#define UCM_COMMON_START        652
-	{OP_WR, UCM_REG_XX_OVFL_EVNT_ID, 0x32},
-	{OP_WR, UCM_REG_UQM_UCM_HDR_P, 0x2150020},
-	{OP_WR, UCM_REG_UQM_UCM_HDR_S, 0x2150020},
-	{OP_WR, UCM_REG_TM_UCM_HDR, 0x30},
-	{OP_WR, UCM_REG_ERR_UCM_HDR, 0x8100000},
-	{OP_WR, UCM_REG_ERR_EVNT_ID, 0x33},
-	{OP_WR, UCM_REG_EXPR_EVNT_ID, 0x30},
-	{OP_WR, UCM_REG_STOP_EVNT_ID, 0x31},
-	{OP_WR, UCM_REG_STORM_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_TSEM_WEIGHT, 0x4},
-	{OP_WR, UCM_REG_CSEM_WEIGHT, 0x0},
-	{OP_WR, UCM_REG_XSEM_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_DORQ_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_CP_WEIGHT, 0x0},
-	{OP_WR, UCM_REG_USDM_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_UQM_P_WEIGHT, 0x7},
-	{OP_WR, UCM_REG_UQM_S_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_TM_WEIGHT, 0x2},
-	{OP_WR, UCM_REG_UCM_UQM_USE_Q, 0x1},
-	{OP_WR, UCM_REG_INV_CFLG_Q, 0x1},
-	{OP_WR, UCM_REG_GR_ARB_TYPE, 0x1},
-	{OP_WR, UCM_REG_GR_LD0_PR, 0x1},
-	{OP_WR, UCM_REG_GR_LD1_PR, 0x2},
-	{OP_WR, UCM_REG_CFC_INIT_CRD, 0x1},
-	{OP_WR, UCM_REG_FIC0_INIT_CRD, 0x40},
-	{OP_WR, UCM_REG_FIC1_INIT_CRD, 0x40},
-	{OP_WR, UCM_REG_TM_INIT_CRD, 0x4},
-	{OP_WR, UCM_REG_UQM_INIT_CRD, 0x20},
-	{OP_WR, UCM_REG_XX_INIT_CRD, 0xe},
-	{OP_WR, UCM_REG_XX_MSG_NUM, 0x1b},
-	{OP_ZR, UCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, UCM_REG_XX_DESCR_TABLE, 0x1b0266},
-	{OP_SW_E1H, UCM_REG_XX_DESCR_TABLE, 0x1b02a0},
-	{OP_WR, UCM_REG_N_SM_CTX_LD_0, 0x10},
-	{OP_WR, UCM_REG_N_SM_CTX_LD_1, 0x7},
-	{OP_WR, UCM_REG_N_SM_CTX_LD_2, 0xf},
-	{OP_WR, UCM_REG_N_SM_CTX_LD_3, 0x10},
-	{OP_ZR_E1, UCM_REG_N_SM_CTX_LD_4, 0x4},
-	{OP_WR_E1H, UCM_REG_N_SM_CTX_LD_4, 0xb},
-	{OP_ZR_E1H, UCM_REG_N_SM_CTX_LD_5, 0x3},
-	{OP_WR, UCM_REG_UCM_REG0_SZ, 0x3},
-	{OP_WR_E1, UCM_REG_PHYS_QNUM0_0, 0xf},
-	{OP_WR_E1, UCM_REG_PHYS_QNUM0_1, 0x2f},
-	{OP_WR_E1, UCM_REG_PHYS_QNUM1_0, 0xe},
-	{OP_WR_E1, UCM_REG_PHYS_QNUM1_1, 0x2e},
-	{OP_WR, UCM_REG_UCM_STORM0_IFEN, 0x1},
-	{OP_WR, UCM_REG_UCM_STORM1_IFEN, 0x1},
-	{OP_WR, UCM_REG_UCM_UQM_IFEN, 0x1},
-	{OP_WR, UCM_REG_STORM_UCM_IFEN, 0x1},
-	{OP_WR, UCM_REG_UQM_UCM_IFEN, 0x1},
-	{OP_WR, UCM_REG_USDM_IFEN, 0x1},
-	{OP_WR, UCM_REG_TM_UCM_IFEN, 0x1},
-	{OP_WR, UCM_REG_UCM_TM_IFEN, 0x1},
-	{OP_WR, UCM_REG_TSEM_IFEN, 0x1},
-	{OP_WR, UCM_REG_CSEM_IFEN, 0x1},
-	{OP_WR, UCM_REG_XSEM_IFEN, 0x1},
-	{OP_WR, UCM_REG_DORQ_IFEN, 0x1},
-	{OP_WR, UCM_REG_CDU_AG_WR_IFEN, 0x1},
-	{OP_WR, UCM_REG_CDU_AG_RD_IFEN, 0x1},
-	{OP_WR, UCM_REG_CDU_SM_WR_IFEN, 0x1},
-	{OP_WR, UCM_REG_CDU_SM_RD_IFEN, 0x1},
-	{OP_WR, UCM_REG_UCM_CFC_IFEN, 0x1},
-#define UCM_COMMON_END          714
-#define UCM_FUNC0_START         714
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_0, 0xf},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_0, 0xe},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_0, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_0, 0x0},
-#define UCM_FUNC0_END           718
-#define UCM_FUNC1_START         718
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_1, 0x2f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_1, 0x2e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_1, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_1, 0x0},
-#define UCM_FUNC1_END           722
-#define UCM_FUNC2_START         722
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_0, 0x1f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_0, 0x1e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_0, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_0, 0x0},
-#define UCM_FUNC2_END           726
-#define UCM_FUNC3_START         726
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_1, 0x3f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_1, 0x3e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_1, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_1, 0x0},
-#define UCM_FUNC3_END           730
-#define UCM_FUNC4_START         730
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_0, 0x4f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_0, 0x4e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_0, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_0, 0x0},
-#define UCM_FUNC4_END           734
-#define UCM_FUNC5_START         734
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_1, 0x6f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_1, 0x6e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_1, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_1, 0x0},
-#define UCM_FUNC5_END           738
-#define UCM_FUNC6_START         738
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_0, 0x5f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_0, 0x5e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_0, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_0, 0x0},
-#define UCM_FUNC6_END           742
-#define UCM_FUNC7_START         742
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM0_1, 0x7f},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM1_1, 0x7e},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM2_1, 0x0},
-	{OP_WR_E1H, UCM_REG_PHYS_QNUM3_1, 0x0},
-#define UCM_FUNC7_END           746
-#define USEM_COMMON_START       746
-	{OP_RD, USEM_REG_MSG_NUM_FIC0, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FIC1, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FOC0, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FOC1, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FOC2, 0x0},
-	{OP_RD, USEM_REG_MSG_NUM_FOC3, 0x0},
-	{OP_WR, USEM_REG_ARB_ELEMENT0, 0x1},
-	{OP_WR, USEM_REG_ARB_ELEMENT1, 0x2},
-	{OP_WR, USEM_REG_ARB_ELEMENT2, 0x3},
-	{OP_WR, USEM_REG_ARB_ELEMENT3, 0x0},
-	{OP_WR, USEM_REG_ARB_ELEMENT4, 0x4},
-	{OP_WR, USEM_REG_ARB_CYCLE_SIZE, 0x1},
-	{OP_WR, USEM_REG_TS_0_AS, 0x0},
-	{OP_WR, USEM_REG_TS_1_AS, 0x1},
-	{OP_WR, USEM_REG_TS_2_AS, 0x4},
-	{OP_WR, USEM_REG_TS_3_AS, 0x0},
-	{OP_WR, USEM_REG_TS_4_AS, 0x1},
-	{OP_WR, USEM_REG_TS_5_AS, 0x3},
-	{OP_WR, USEM_REG_TS_6_AS, 0x0},
-	{OP_WR, USEM_REG_TS_7_AS, 0x1},
-	{OP_WR, USEM_REG_TS_8_AS, 0x4},
-	{OP_WR, USEM_REG_TS_9_AS, 0x0},
-	{OP_WR, USEM_REG_TS_10_AS, 0x1},
-	{OP_WR, USEM_REG_TS_11_AS, 0x3},
-	{OP_WR, USEM_REG_TS_12_AS, 0x0},
-	{OP_WR, USEM_REG_TS_13_AS, 0x1},
-	{OP_WR, USEM_REG_TS_14_AS, 0x4},
-	{OP_WR, USEM_REG_TS_15_AS, 0x0},
-	{OP_WR, USEM_REG_TS_16_AS, 0x4},
-	{OP_WR, USEM_REG_TS_17_AS, 0x3},
-	{OP_ZR, USEM_REG_TS_18_AS, 0x2},
-	{OP_WR, USEM_REG_ENABLE_IN, 0x3fff},
-	{OP_WR, USEM_REG_ENABLE_OUT, 0x3ff},
-	{OP_WR, USEM_REG_FIC0_DISABLE, 0x0},
-	{OP_WR, USEM_REG_FIC1_DISABLE, 0x0},
-	{OP_WR, USEM_REG_PAS_DISABLE, 0x0},
-	{OP_WR, USEM_REG_THREADS_LIST, 0xffff},
-	{OP_ZR, USEM_REG_PASSIVE_BUFFER, 0x800},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x18bc0, 0x1},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x18000, 0x1a},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x18040, 0x4e},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x18080, 0x10},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x180c0, 0x20},
-	{OP_WR_ASIC, USEM_REG_FAST_MEMORY + 0x18300, 0x7a120},
-	{OP_WR_EMUL, USEM_REG_FAST_MEMORY + 0x18300, 0x138},
-	{OP_WR_FPGA, USEM_REG_FAST_MEMORY + 0x18300, 0x1388},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x183c0, 0x1f4},
-	{OP_WR_ASIC, USEM_REG_FAST_MEMORY + 0x18380, 0x1dcd6500},
-	{OP_WR_EMUL, USEM_REG_FAST_MEMORY + 0x18380, 0x4c4b4},
-	{OP_WR_FPGA, USEM_REG_FAST_MEMORY + 0x18380, 0x4c4b40},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5000, 0xc2},
-	{OP_WR_EMUL_E1H, USEM_REG_FAST_MEMORY + 0x11480, 0x0},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1020, 0xc8},
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x11480, 0x1},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1000, 0x2},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2000, 0x102},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4640, 0x40},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x8980, 0xc8},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x57f0, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x8960, 0x2},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x57d8, 0x5},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3228, 0x4},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x57d8 + 0x14, 0x10281},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3200, 0x9},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1c60, 0x20},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x3200 + 0x24, 0x102bb},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x20282},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3180, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x400},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4000, 0x2},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x4000 + 0x8, 0x102bc},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4000 + 0xc, 0x3},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b68, 0x2},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x6b68 + 0x8, 0x202bd},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b10, 0x2},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x74c0, 0x202bf},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x100284},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c00, 0x1002c1},
-	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x100294},
-	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c40, 0x1002d1},
-	{OP_ZP_E1, USEM_REG_INT_TABLE, 0xc30000},
-	{OP_ZP_E1H, USEM_REG_INT_TABLE, 0xd20000},
-	{OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x1302a4},
-	{OP_WR_64_E1H, USEM_REG_INT_TABLE + 0x3a8, 0xb02e1},
-	{OP_ZP_E1, USEM_REG_PRAM, 0x314c0000},
-	{OP_ZP_E1H, USEM_REG_PRAM, 0x31b60000},
-	{OP_ZP_E1, USEM_REG_PRAM + 0x8000, 0x35ef0c53},
-	{OP_ZP_E1H, USEM_REG_PRAM + 0x8000, 0x36500c6e},
-	{OP_ZP_E1, USEM_REG_PRAM + 0x10000, 0x361319cf},
-	{OP_ZP_E1H, USEM_REG_PRAM + 0x10000, 0x37591a02},
-	{OP_ZP_E1, USEM_REG_PRAM + 0x18000, 0x7112754},
-	{OP_ZP_E1H, USEM_REG_PRAM + 0x18000, 0x286127d9},
-	{OP_WR_64_E1, USEM_REG_PRAM + 0x18ee0, 0x4e2402a6},
-	{OP_WR_64_E1H, USEM_REG_PRAM + 0x1ff40, 0x401802e3},
-#define USEM_COMMON_END         842
-#define USEM_PORT0_START        842
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1400, 0xa0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9000, 0xa0},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1900, 0x10},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9500, 0x40},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1980, 0x30},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9700, 0x3c},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4740, 0xb4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2450, 0xb4},
-	{OP_WR_E1, USEM_REG_FAST_MEMORY + 0x1d90, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2ad0, 0x2},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1b40, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3080, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1b60, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x8000, 0x12c},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5318, 0x98},
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x3238, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5100, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5200, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5300, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5400, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5500, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5600, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5700, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5800, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5900, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f00, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b78, 0x52},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e08, 0xc},
-#define USEM_PORT0_END          876
-#define USEM_PORT1_START        876
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1680, 0xa0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9280, 0xa0},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1940, 0x10},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9600, 0x40},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1a40, 0x30},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x97f0, 0x3c},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4a10, 0xb4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2720, 0xb4},
-	{OP_WR_E1, USEM_REG_FAST_MEMORY + 0x1d94, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x2ad8, 0x2},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1b50, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3100, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1be0, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x84b0, 0x12c},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5578, 0x98},
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x323c, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5080, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5180, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5280, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5380, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5480, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5580, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5680, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5780, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5880, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5980, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f80, 0x20},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6cc0, 0x52},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e38, 0xc},
-#define USEM_PORT1_END          910
-#define USEM_FUNC0_START        910
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a30, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3000, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4018, 0x2},
-#define USEM_FUNC0_END          913
-#define USEM_FUNC1_START        913
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a34, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3010, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4028, 0x2},
-#define USEM_FUNC1_END          916
-#define USEM_FUNC2_START        916
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a38, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3020, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4038, 0x2},
-#define USEM_FUNC2_END          919
-#define USEM_FUNC3_START        919
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a3c, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3030, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4048, 0x2},
-#define USEM_FUNC3_END          922
-#define USEM_FUNC4_START        922
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a40, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3040, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4058, 0x2},
-#define USEM_FUNC4_END          925
-#define USEM_FUNC5_START        925
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a44, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3050, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4068, 0x2},
-#define USEM_FUNC5_END          928
-#define USEM_FUNC6_START        928
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a48, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3060, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4078, 0x2},
-#define USEM_FUNC6_END          931
-#define USEM_FUNC7_START        931
-	{OP_WR_E1H, USEM_REG_FAST_MEMORY + 0x2a4c, 0x0},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3070, 0x4},
-	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4088, 0x2},
-#define USEM_FUNC7_END          934
-#define CSEM_COMMON_START       934
-	{OP_RD, CSEM_REG_MSG_NUM_FIC0, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FIC1, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FOC0, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FOC1, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FOC2, 0x0},
-	{OP_RD, CSEM_REG_MSG_NUM_FOC3, 0x0},
-	{OP_WR, CSEM_REG_ARB_ELEMENT0, 0x1},
-	{OP_WR, CSEM_REG_ARB_ELEMENT1, 0x2},
-	{OP_WR, CSEM_REG_ARB_ELEMENT2, 0x3},
-	{OP_WR, CSEM_REG_ARB_ELEMENT3, 0x0},
-	{OP_WR, CSEM_REG_ARB_ELEMENT4, 0x4},
-	{OP_WR, CSEM_REG_ARB_CYCLE_SIZE, 0x1},
-	{OP_WR, CSEM_REG_TS_0_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_1_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_2_AS, 0x4},
-	{OP_WR, CSEM_REG_TS_3_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_4_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_5_AS, 0x3},
-	{OP_WR, CSEM_REG_TS_6_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_7_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_8_AS, 0x4},
-	{OP_WR, CSEM_REG_TS_9_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_10_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_11_AS, 0x3},
-	{OP_WR, CSEM_REG_TS_12_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_13_AS, 0x1},
-	{OP_WR, CSEM_REG_TS_14_AS, 0x4},
-	{OP_WR, CSEM_REG_TS_15_AS, 0x0},
-	{OP_WR, CSEM_REG_TS_16_AS, 0x4},
-	{OP_WR, CSEM_REG_TS_17_AS, 0x3},
-	{OP_ZR, CSEM_REG_TS_18_AS, 0x2},
-	{OP_WR, CSEM_REG_ENABLE_IN, 0x3fff},
-	{OP_WR, CSEM_REG_ENABLE_OUT, 0x3ff},
-	{OP_WR, CSEM_REG_FIC0_DISABLE, 0x0},
-	{OP_WR, CSEM_REG_FIC1_DISABLE, 0x0},
-	{OP_WR, CSEM_REG_PAS_DISABLE, 0x0},
-	{OP_WR, CSEM_REG_THREADS_LIST, 0xffff},
-	{OP_ZR, CSEM_REG_PASSIVE_BUFFER, 0x800},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x18bc0, 0x1},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x18000, 0x10},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x18040, 0x12},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x18080, 0x30},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x180c0, 0xe},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x183c0, 0x1f4},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x5000, 0x42},
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x11480, 0x1},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1020, 0xc8},
-	{OP_WR_EMUL_E1H, CSEM_REG_FAST_MEMORY + 0x11480, 0x0},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1000, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x1000, 0x42},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2000, 0xc0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x7020, 0xc8},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3070, 0x80},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x7000, 0x2},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x4280, 0x4},
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x11e8, 0x0},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x25c0, 0x240},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3000, 0xc0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a8},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4070, 0x80},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x5280, 0x4},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6700, 0x100},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x9000, 0x400},
-	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x6b08, 0x2002e5},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x13fffff},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002b0},
-	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c00, 0x100305},
-	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002c0},
-	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c40, 0x100315},
-	{OP_ZP_E1, CSEM_REG_INT_TABLE, 0x710000},
-	{OP_ZP_E1H, CSEM_REG_INT_TABLE, 0x740000},
-	{OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002d0},
-	{OP_WR_64_E1H, CSEM_REG_INT_TABLE + 0x380, 0x100325},
-	{OP_ZP_E1, CSEM_REG_PRAM, 0x32290000},
-	{OP_ZP_E1H, CSEM_REG_PRAM, 0x32260000},
-	{OP_ZP_E1, CSEM_REG_PRAM + 0x8000, 0x23630c8b},
-	{OP_ZP_E1H, CSEM_REG_PRAM + 0x8000, 0x246e0c8a},
-	{OP_WR_64_E1, CSEM_REG_PRAM + 0xc930, 0x654002d2},
-	{OP_WR_64_E1H, CSEM_REG_PRAM + 0xcbb0, 0x64f00327},
-#define CSEM_COMMON_END         1014
-#define CSEM_PORT0_START        1014
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1400, 0xa0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8000, 0xa0},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1900, 0x10},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8500, 0x40},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1980, 0x30},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8700, 0x3c},
-	{OP_WR_E1, CSEM_REG_FAST_MEMORY + 0x5118, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4040, 0x6},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2300, 0xe},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3040, 0x6},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2410, 0x30},
-#define CSEM_PORT0_END          1025
-#define CSEM_PORT1_START        1025
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1680, 0xa0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8280, 0xa0},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1940, 0x10},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8600, 0x40},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1a40, 0x30},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x87f0, 0x3c},
-	{OP_WR_E1, CSEM_REG_FAST_MEMORY + 0x511c, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4058, 0x6},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2338, 0xe},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3058, 0x6},
-	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x24d0, 0x30},
-#define CSEM_PORT1_END          1036
-#define CSEM_FUNC0_START        1036
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1148, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3300, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6040, 0x30},
-#define CSEM_FUNC0_END          1039
-#define CSEM_FUNC1_START        1039
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x114c, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3308, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6100, 0x30},
-#define CSEM_FUNC1_END          1042
-#define CSEM_FUNC2_START        1042
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1150, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3310, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x61c0, 0x30},
-#define CSEM_FUNC2_END          1045
-#define CSEM_FUNC3_START        1045
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1154, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3318, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6280, 0x30},
-#define CSEM_FUNC3_END          1048
-#define CSEM_FUNC4_START        1048
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1158, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3320, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6340, 0x30},
-#define CSEM_FUNC4_END          1051
-#define CSEM_FUNC5_START        1051
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x115c, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3328, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6400, 0x30},
-#define CSEM_FUNC5_END          1054
-#define CSEM_FUNC6_START        1054
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1160, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3330, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x64c0, 0x30},
-#define CSEM_FUNC6_END          1057
-#define CSEM_FUNC7_START        1057
-	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1164, 0x0},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3338, 0x2},
-	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6580, 0x30},
-#define CSEM_FUNC7_END          1060
-#define XPB_COMMON_START        1060
-	{OP_WR, GRCBASE_XPB + PB_REG_CONTROL, 0x20},
-#define XPB_COMMON_END          1061
-#define DQ_COMMON_START         1061
-	{OP_WR, DORQ_REG_MODE_ACT, 0x2},
-	{OP_WR, DORQ_REG_NORM_CID_OFST, 0x3},
-	{OP_WR, DORQ_REG_OUTST_REQ, 0x4},
-	{OP_WR, DORQ_REG_DPM_CID_ADDR, 0x8},
-	{OP_WR, DORQ_REG_RSP_INIT_CRD, 0x2},
-	{OP_WR, DORQ_REG_NORM_CMHEAD_TX, 0x90},
-	{OP_WR, DORQ_REG_CMHEAD_RX, 0x90},
-	{OP_WR, DORQ_REG_SHRT_CMHEAD, 0x800090},
-	{OP_WR, DORQ_REG_ERR_CMHEAD, 0x8140000},
-	{OP_WR, DORQ_REG_AGG_CMD0, 0x8a},
-	{OP_WR, DORQ_REG_AGG_CMD1, 0x80},
-	{OP_WR, DORQ_REG_AGG_CMD2, 0x90},
-	{OP_WR, DORQ_REG_AGG_CMD3, 0x80},
-	{OP_WR, DORQ_REG_SHRT_ACT_CNT, 0x6},
-	{OP_WR, DORQ_REG_DQ_FIFO_FULL_TH, 0x7d0},
-	{OP_WR, DORQ_REG_DQ_FIFO_AFULL_TH, 0x76c},
-	{OP_WR, DORQ_REG_REGN, 0x7c1004},
-	{OP_WR, DORQ_REG_IF_EN, 0xf},
-#define DQ_COMMON_END           1079
-#define TIMERS_COMMON_START     1079
-	{OP_ZR, TM_REG_CLIN_PRIOR0_CLIENT, 0x2},
-	{OP_WR, TM_REG_LIN_SETCLR_FIFO_ALFULL_THR, 0x1c},
-	{OP_WR, TM_REG_CFC_AC_CRDCNT_VAL, 0x1},
-	{OP_WR, TM_REG_CFC_CLD_CRDCNT_VAL, 0x1},
-	{OP_WR, TM_REG_CLOUT_CRDCNT0_VAL, 0x1},
-	{OP_WR, TM_REG_CLOUT_CRDCNT1_VAL, 0x1},
-	{OP_WR, TM_REG_CLOUT_CRDCNT2_VAL, 0x1},
-	{OP_WR, TM_REG_EXP_CRDCNT_VAL, 0x1},
-	{OP_WR_E1, TM_REG_PCIARB_CRDCNT_VAL, 0x1},
-	{OP_WR_E1H, TM_REG_PCIARB_CRDCNT_VAL, 0x2},
-	{OP_WR_ASIC, TM_REG_TIMER_TICK_SIZE, 0x3d090},
-	{OP_WR_EMUL, TM_REG_TIMER_TICK_SIZE, 0x9c},
-	{OP_WR_FPGA, TM_REG_TIMER_TICK_SIZE, 0x9c4},
-	{OP_WR, TM_REG_CL0_CONT_REGION, 0x8},
-	{OP_WR, TM_REG_CL1_CONT_REGION, 0xc},
-	{OP_WR, TM_REG_CL2_CONT_REGION, 0x10},
-	{OP_WR, TM_REG_TM_CONTEXT_REGION, 0x20},
-	{OP_WR, TM_REG_EN_TIMERS, 0x1},
-	{OP_WR, TM_REG_EN_REAL_TIME_CNT, 0x1},
-	{OP_WR, TM_REG_EN_CL0_INPUT, 0x1},
-	{OP_WR, TM_REG_EN_CL1_INPUT, 0x1},
-	{OP_WR, TM_REG_EN_CL2_INPUT, 0x1},
-#define TIMERS_COMMON_END       1101
-#define TIMERS_PORT0_START      1101
-	{OP_WR, TM_REG_LIN0_LOGIC_ADDR, 0x0},
-	{OP_WR, TM_REG_LIN0_PHY_ADDR_VALID, 0x0},
-	{OP_ZR, TM_REG_LIN0_PHY_ADDR, 0x2},
-#define TIMERS_PORT0_END        1104
-#define TIMERS_PORT1_START      1104
-	{OP_WR, TM_REG_LIN1_LOGIC_ADDR, 0x0},
-	{OP_WR, TM_REG_LIN1_PHY_ADDR_VALID, 0x0},
-	{OP_ZR, TM_REG_LIN1_PHY_ADDR, 0x2},
-#define TIMERS_PORT1_END        1107
-#define XSDM_COMMON_START       1107
-	{OP_WR_E1, XSDM_REG_CFC_RSP_START_ADDR, 0x614},
-	{OP_WR_E1H, XSDM_REG_CFC_RSP_START_ADDR, 0x424},
-	{OP_WR_E1, XSDM_REG_CMP_COUNTER_START_ADDR, 0x600},
-	{OP_WR_E1H, XSDM_REG_CMP_COUNTER_START_ADDR, 0x410},
-	{OP_WR_E1, XSDM_REG_Q_COUNTER_START_ADDR, 0x604},
-	{OP_WR_E1H, XSDM_REG_Q_COUNTER_START_ADDR, 0x414},
-	{OP_WR, XSDM_REG_CMP_COUNTER_MAX0, 0xffff},
-	{OP_WR, XSDM_REG_CMP_COUNTER_MAX1, 0xffff},
-	{OP_WR, XSDM_REG_CMP_COUNTER_MAX2, 0xffff},
-	{OP_WR, XSDM_REG_CMP_COUNTER_MAX3, 0xffff},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_0, 0x20},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_1, 0x20},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_2, 0x34},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_3, 0x35},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_4, 0x23},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_5, 0x24},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_6, 0x25},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_7, 0x26},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_8, 0x27},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_9, 0x29},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_10, 0x2a},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_11, 0x2b},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_12, 0x2c},
-	{OP_WR, XSDM_REG_AGG_INT_EVENT_13, 0x2d},
-	{OP_ZR, XSDM_REG_AGG_INT_EVENT_14, 0x52},
-	{OP_WR, XSDM_REG_AGG_INT_MODE_0, 0x1},
-	{OP_ZR, XSDM_REG_AGG_INT_MODE_1, 0x1f},
-	{OP_WR, XSDM_REG_ENABLE_IN1, 0x7ffffff},
-	{OP_WR, XSDM_REG_ENABLE_IN2, 0x3f},
-	{OP_WR, XSDM_REG_ENABLE_OUT1, 0x7ffffff},
-	{OP_WR, XSDM_REG_ENABLE_OUT2, 0xf},
-	{OP_RD, XSDM_REG_NUM_OF_Q0_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q1_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q3_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q4_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q5_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q6_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q7_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q8_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q9_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q10_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_Q11_CMD, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_PKT_END_MSG, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_PXP_ASYNC_REQ, 0x0},
-	{OP_RD, XSDM_REG_NUM_OF_ACK_AFTER_PLACE, 0x0},
-	{OP_WR_E1, XSDM_REG_INIT_CREDIT_PXP_CTRL, 0x1},
-	{OP_WR_ASIC, XSDM_REG_TIMER_TICK, 0x3e8},
-	{OP_WR_EMUL, XSDM_REG_TIMER_TICK, 0x1},
-	{OP_WR_FPGA, XSDM_REG_TIMER_TICK, 0xa},
-#define XSDM_COMMON_END         1156
-#define QM_COMMON_START         1156
-	{OP_WR, QM_REG_ACTCTRINITVAL_0, 0x6},
-	{OP_WR, QM_REG_ACTCTRINITVAL_1, 0x5},
-	{OP_WR, QM_REG_ACTCTRINITVAL_2, 0xa},
-	{OP_WR, QM_REG_ACTCTRINITVAL_3, 0x5},
-	{OP_WR, QM_REG_PCIREQAT, 0x2},
-	{OP_WR, QM_REG_CMINITCRD_0, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_1, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_2, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_3, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_4, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_5, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_6, 0x4},
-	{OP_WR, QM_REG_CMINITCRD_7, 0x4},
-	{OP_WR, QM_REG_OUTLDREQ, 0x4},
-	{OP_WR, QM_REG_CTXREG_0, 0x7c},
-	{OP_WR, QM_REG_CTXREG_1, 0x3d},
-	{OP_WR, QM_REG_CTXREG_2, 0x3f},
-	{OP_WR, QM_REG_CTXREG_3, 0x9c},
-	{OP_WR, QM_REG_ENSEC, 0x7},
-	{OP_ZR, QM_REG_QVOQIDX_0, 0x5},
-	{OP_WR, QM_REG_WRRWEIGHTS_0, 0x1010101},
-	{OP_WR, QM_REG_QVOQIDX_5, 0x0},
-	{OP_WR, QM_REG_QVOQIDX_6, 0x4},
-	{OP_WR, QM_REG_QVOQIDX_7, 0x4},
-	{OP_WR, QM_REG_QVOQIDX_8, 0x2},
-	{OP_WR, QM_REG_WRRWEIGHTS_1, 0x8012004},
-	{OP_WR, QM_REG_QVOQIDX_9, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_10, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_11, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_12, 0x5},
-	{OP_WR, QM_REG_WRRWEIGHTS_2, 0x20081001},
-	{OP_WR, QM_REG_QVOQIDX_13, 0x8},
-	{OP_WR, QM_REG_QVOQIDX_14, 0x6},
-	{OP_WR, QM_REG_QVOQIDX_15, 0x7},
-	{OP_WR, QM_REG_QVOQIDX_16, 0x0},
-	{OP_WR, QM_REG_WRRWEIGHTS_3, 0x1010120},
-	{OP_ZR, QM_REG_QVOQIDX_17, 0x4},
-	{OP_WR, QM_REG_WRRWEIGHTS_4, 0x1010101},
-	{OP_ZR_E1, QM_REG_QVOQIDX_21, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_21, 0x0},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_5, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_22, 0x4},
-	{OP_ZR_E1, QM_REG_QVOQIDX_25, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_23, 0x4},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_6, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_24, 0x2},
-	{OP_ZR_E1, QM_REG_QVOQIDX_29, 0x3},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_5, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_25, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_26, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_27, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_28, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_6, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_29, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_30, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_31, 0x7},
-	{OP_WR, QM_REG_QVOQIDX_32, 0x1},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_7, 0x1010101},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_7, 0x1010120},
-	{OP_WR, QM_REG_QVOQIDX_33, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_34, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_35, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_36, 0x1},
-	{OP_WR, QM_REG_WRRWEIGHTS_8, 0x1010101},
-	{OP_WR, QM_REG_QVOQIDX_37, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_38, 0x4},
-	{OP_WR, QM_REG_QVOQIDX_39, 0x4},
-	{OP_WR, QM_REG_QVOQIDX_40, 0x2},
-	{OP_WR, QM_REG_WRRWEIGHTS_9, 0x8012004},
-	{OP_WR, QM_REG_QVOQIDX_41, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_42, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_43, 0x5},
-	{OP_WR, QM_REG_QVOQIDX_44, 0x5},
-	{OP_WR, QM_REG_WRRWEIGHTS_10, 0x20081001},
-	{OP_WR, QM_REG_QVOQIDX_45, 0x8},
-	{OP_WR, QM_REG_QVOQIDX_46, 0x6},
-	{OP_WR, QM_REG_QVOQIDX_47, 0x7},
-	{OP_WR, QM_REG_QVOQIDX_48, 0x1},
-	{OP_WR, QM_REG_WRRWEIGHTS_11, 0x1010120},
-	{OP_WR, QM_REG_QVOQIDX_49, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_50, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_51, 0x1},
-	{OP_WR, QM_REG_QVOQIDX_52, 0x1},
-	{OP_WR, QM_REG_WRRWEIGHTS_12, 0x1010101},
-	{OP_WR, QM_REG_QVOQIDX_53, 0x1},
-	{OP_WR_E1, QM_REG_QVOQIDX_54, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_54, 0x4},
-	{OP_WR_E1, QM_REG_QVOQIDX_55, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_55, 0x4},
-	{OP_WR_E1, QM_REG_QVOQIDX_56, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_56, 0x2},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_13, 0x1010101},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_13, 0x8012004},
-	{OP_WR_E1, QM_REG_QVOQIDX_57, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_57, 0x5},
-	{OP_WR_E1, QM_REG_QVOQIDX_58, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_58, 0x5},
-	{OP_WR_E1, QM_REG_QVOQIDX_59, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_59, 0x5},
-	{OP_WR_E1, QM_REG_QVOQIDX_60, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_60, 0x5},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_14, 0x1010101},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_14, 0x20081001},
-	{OP_WR_E1, QM_REG_QVOQIDX_61, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_61, 0x8},
-	{OP_WR_E1, QM_REG_QVOQIDX_62, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_62, 0x6},
-	{OP_WR_E1, QM_REG_QVOQIDX_63, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_63, 0x7},
-	{OP_WR_E1, QM_REG_WRRWEIGHTS_15, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_64, 0x0},
-	{OP_WR_E1, QM_REG_VOQQMASK_0_LSB, 0xffff003f},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_15, 0x1010120},
-	{OP_ZR_E1, QM_REG_VOQQMASK_0_MSB, 0x2},
-	{OP_ZR_E1H, QM_REG_QVOQIDX_65, 0x4},
-	{OP_WR_E1, QM_REG_VOQQMASK_1_MSB, 0xffff003f},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_16, 0x1010101},
-	{OP_WR_E1, QM_REG_VOQQMASK_2_LSB, 0x100},
-	{OP_WR_E1H, QM_REG_QVOQIDX_69, 0x0},
-	{OP_WR_E1, QM_REG_VOQQMASK_2_MSB, 0x100},
-	{OP_WR_E1H, QM_REG_QVOQIDX_70, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_71, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_72, 0x2},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_17, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_73, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_74, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_75, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_76, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_18, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_77, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_78, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_79, 0x7},
-	{OP_WR_E1H, QM_REG_QVOQIDX_80, 0x0},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_19, 0x1010120},
-	{OP_ZR_E1H, QM_REG_QVOQIDX_81, 0x4},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_20, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_85, 0x0},
-	{OP_WR_E1H, QM_REG_QVOQIDX_86, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_87, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_88, 0x2},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_21, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_89, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_90, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_91, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_92, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_22, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_93, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_94, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_95, 0x7},
-	{OP_WR_E1H, QM_REG_QVOQIDX_96, 0x1},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_23, 0x1010120},
-	{OP_WR_E1H, QM_REG_QVOQIDX_97, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_98, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_99, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_100, 0x1},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_24, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_101, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_102, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_103, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_104, 0x2},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_25, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_105, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_106, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_107, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_108, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_26, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_109, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_110, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_111, 0x7},
-	{OP_WR_E1H, QM_REG_QVOQIDX_112, 0x1},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_27, 0x1010120},
-	{OP_WR_E1H, QM_REG_QVOQIDX_113, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_114, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_115, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_116, 0x1},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_28, 0x1010101},
-	{OP_WR_E1H, QM_REG_QVOQIDX_117, 0x1},
-	{OP_WR_E1H, QM_REG_QVOQIDX_118, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_119, 0x4},
-	{OP_WR_E1H, QM_REG_QVOQIDX_120, 0x2},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_29, 0x8012004},
-	{OP_WR_E1H, QM_REG_QVOQIDX_121, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_122, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_123, 0x5},
-	{OP_WR_E1H, QM_REG_QVOQIDX_124, 0x5},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_30, 0x20081001},
-	{OP_WR_E1H, QM_REG_QVOQIDX_125, 0x8},
-	{OP_WR_E1H, QM_REG_QVOQIDX_126, 0x6},
-	{OP_WR_E1H, QM_REG_QVOQIDX_127, 0x7},
-	{OP_WR_E1H, QM_REG_WRRWEIGHTS_31, 0x1010120},
-	{OP_WR_E1H, QM_REG_VOQQMASK_0_LSB, 0x3f003f},
-	{OP_WR_E1H, QM_REG_VOQQMASK_0_MSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_0_LSB_EXT_A, 0x3f003f},
-	{OP_WR_E1H, QM_REG_VOQQMASK_0_MSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_1_LSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_1_MSB, 0x3f003f},
-	{OP_WR_E1H, QM_REG_VOQQMASK_1_LSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_1_MSB_EXT_A, 0x3f003f},
-	{OP_WR_E1H, QM_REG_VOQQMASK_2_LSB, 0x1000100},
-	{OP_WR_E1H, QM_REG_VOQQMASK_2_MSB, 0x1000100},
-	{OP_WR_E1H, QM_REG_VOQQMASK_2_LSB_EXT_A, 0x1000100},
-	{OP_WR_E1H, QM_REG_VOQQMASK_2_MSB_EXT_A, 0x1000100},
-	{OP_ZR, QM_REG_VOQQMASK_3_LSB, 0x2},
-	{OP_WR_E1, QM_REG_VOQQMASK_4_LSB, 0xc0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_3_LSB_EXT_A, 0x0},
-	{OP_WR_E1, QM_REG_VOQQMASK_4_MSB, 0xc0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_3_MSB_EXT_A, 0x0},
-	{OP_WR_E1, QM_REG_VOQQMASK_5_LSB, 0x1e00},
-	{OP_WR_E1H, QM_REG_VOQQMASK_4_LSB, 0xc000c0},
-	{OP_WR_E1, QM_REG_VOQQMASK_5_MSB, 0x1e00},
-	{OP_WR_E1H, QM_REG_VOQQMASK_4_MSB, 0xc000c0},
-	{OP_WR_E1, QM_REG_VOQQMASK_6_LSB, 0x4000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_4_LSB_EXT_A, 0xc000c0},
-	{OP_WR_E1, QM_REG_VOQQMASK_6_MSB, 0x4000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_4_MSB_EXT_A, 0xc000c0},
-	{OP_WR_E1, QM_REG_VOQQMASK_7_LSB, 0x8000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_5_LSB, 0x1e001e00},
-	{OP_WR_E1, QM_REG_VOQQMASK_7_MSB, 0x8000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_5_MSB, 0x1e001e00},
-	{OP_WR_E1, QM_REG_VOQQMASK_8_LSB, 0x2000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_5_LSB_EXT_A, 0x1e001e00},
-	{OP_WR_E1, QM_REG_VOQQMASK_8_MSB, 0x2000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_5_MSB_EXT_A, 0x1e001e00},
-	{OP_ZR_E1, QM_REG_VOQQMASK_9_LSB, 0x7},
-	{OP_WR_E1H, QM_REG_VOQQMASK_6_LSB, 0x40004000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_6_MSB, 0x40004000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_6_LSB_EXT_A, 0x40004000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_6_MSB_EXT_A, 0x40004000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_7_LSB, 0x80008000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_7_MSB, 0x80008000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_7_LSB_EXT_A, 0x80008000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_7_MSB_EXT_A, 0x80008000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_8_LSB, 0x20002000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_8_MSB, 0x20002000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_8_LSB_EXT_A, 0x20002000},
-	{OP_WR_E1H, QM_REG_VOQQMASK_8_MSB_EXT_A, 0x20002000},
-	{OP_ZR_E1H, QM_REG_VOQQMASK_9_LSB, 0x2},
-	{OP_WR_E1H, QM_REG_VOQQMASK_9_LSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_9_MSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_10_LSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_10_MSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_10_LSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_10_MSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_11_LSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_11_MSB, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_11_LSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQQMASK_11_MSB_EXT_A, 0x0},
-	{OP_WR_E1H, QM_REG_VOQPORT_0, 0x0},
-	{OP_WR, QM_REG_VOQPORT_1, 0x1},
-	{OP_ZR, QM_REG_VOQPORT_2, 0xa},
-	{OP_WR, QM_REG_CMINTVOQMASK_0, 0xc08},
-	{OP_WR, QM_REG_CMINTVOQMASK_1, 0x40},
-	{OP_WR, QM_REG_CMINTVOQMASK_2, 0x100},
-	{OP_WR, QM_REG_CMINTVOQMASK_3, 0x20},
-	{OP_WR, QM_REG_CMINTVOQMASK_4, 0x17},
-	{OP_WR, QM_REG_CMINTVOQMASK_5, 0x80},
-	{OP_WR, QM_REG_CMINTVOQMASK_6, 0x200},
-	{OP_WR, QM_REG_CMINTVOQMASK_7, 0x0},
-	{OP_WR_E1, QM_REG_HWAEMPTYMASK_LSB, 0xffff01ff},
-	{OP_WR_E1H, QM_REG_HWAEMPTYMASK_LSB, 0x1ff01ff},
-	{OP_WR_E1, QM_REG_HWAEMPTYMASK_MSB, 0xffff01ff},
-	{OP_WR_E1H, QM_REG_HWAEMPTYMASK_MSB, 0x1ff01ff},
-	{OP_WR_E1H, QM_REG_HWAEMPTYMASK_LSB_EXT_A, 0x1ff01ff},
-	{OP_WR_E1H, QM_REG_HWAEMPTYMASK_MSB_EXT_A, 0x1ff01ff},
-	{OP_WR, QM_REG_ENBYPVOQMASK, 0x13},
-	{OP_WR, QM_REG_VOQCREDITAFULLTHR, 0x13f},
-	{OP_WR, QM_REG_VOQINITCREDIT_0, 0x140},
-	{OP_WR, QM_REG_VOQINITCREDIT_1, 0x140},
-	{OP_ZR, QM_REG_VOQINITCREDIT_2, 0x2},
-	{OP_WR, QM_REG_VOQINITCREDIT_4, 0xc0},
-	{OP_ZR, QM_REG_VOQINITCREDIT_5, 0x7},
-	{OP_WR, QM_REG_TASKCRDCOST_0, 0x48},
-	{OP_WR, QM_REG_TASKCRDCOST_1, 0x48},
-	{OP_ZR, QM_REG_TASKCRDCOST_2, 0x2},
-	{OP_WR, QM_REG_TASKCRDCOST_4, 0x48},
-	{OP_ZR, QM_REG_TASKCRDCOST_5, 0x7},
-	{OP_WR, QM_REG_BYTECRDINITVAL, 0x8000},
-	{OP_WR, QM_REG_BYTECRDCOST, 0x25e4},
-	{OP_WR, QM_REG_BYTECREDITAFULLTHR, 0x7fff},
-	{OP_WR_E1, QM_REG_ENBYTECRD_LSB, 0x7},
-	{OP_WR_E1H, QM_REG_ENBYTECRD_LSB, 0x70007},
-	{OP_WR_E1, QM_REG_ENBYTECRD_MSB, 0x7},
-	{OP_WR_E1H, QM_REG_ENBYTECRD_MSB, 0x70007},
-	{OP_WR_E1H, QM_REG_ENBYTECRD_LSB_EXT_A, 0x70007},
-	{OP_WR_E1H, QM_REG_ENBYTECRD_MSB_EXT_A, 0x70007},
-	{OP_WR, QM_REG_BYTECRDPORT_LSB, 0x0},
-	{OP_WR, QM_REG_BYTECRDPORT_MSB, 0xffffffff},
-	{OP_WR_E1, QM_REG_FUNCNUMSEL_LSB, 0x0},
-	{OP_WR_E1H, QM_REG_BYTECRDPORT_LSB_EXT_A, 0x0},
-	{OP_WR_E1, QM_REG_FUNCNUMSEL_MSB, 0xffffffff},
-	{OP_WR_E1H, QM_REG_BYTECRDPORT_MSB_EXT_A, 0xffffffff},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_0, 0x0},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_1, 0x2},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_2, 0x1},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_3, 0x3},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_4, 0x4},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_5, 0x6},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_6, 0x5},
-	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_7, 0x7},
-	{OP_WR, QM_REG_CMINTEN, 0xff},
-#define QM_COMMON_END           1456
-#define PBF_COMMON_START        1456
-	{OP_WR, PBF_REG_INIT, 0x1},
-	{OP_WR, PBF_REG_INIT_P4, 0x1},
-	{OP_WR, PBF_REG_MAC_LB_ENABLE, 0x1},
-	{OP_WR, PBF_REG_IF_ENABLE_REG, 0x7fff},
-	{OP_WR, PBF_REG_INIT_P4, 0x0},
-	{OP_WR, PBF_REG_INIT, 0x0},
-	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P4, 0x0},
-#define PBF_COMMON_END          1463
-#define PBF_PORT0_START         1463
-	{OP_WR, PBF_REG_INIT_P0, 0x1},
-	{OP_WR, PBF_REG_MAC_IF0_ENABLE, 0x1},
-	{OP_WR, PBF_REG_INIT_P0, 0x0},
-	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P0, 0x0},
-#define PBF_PORT0_END           1467
-#define PBF_PORT1_START         1467
-	{OP_WR, PBF_REG_INIT_P1, 0x1},
-	{OP_WR, PBF_REG_MAC_IF1_ENABLE, 0x1},
-	{OP_WR, PBF_REG_INIT_P1, 0x0},
-	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P1, 0x0},
-#define PBF_PORT1_END           1471
-#define XCM_COMMON_START        1471
-	{OP_WR, XCM_REG_XX_OVFL_EVNT_ID, 0x32},
-	{OP_WR, XCM_REG_XQM_XCM_HDR_P, 0x3150020},
-	{OP_WR, XCM_REG_XQM_XCM_HDR_S, 0x3150020},
-	{OP_WR, XCM_REG_TM_XCM_HDR, 0x1000030},
-	{OP_WR, XCM_REG_ERR_XCM_HDR, 0x8100000},
-	{OP_WR, XCM_REG_ERR_EVNT_ID, 0x33},
-	{OP_WR, XCM_REG_EXPR_EVNT_ID, 0x30},
-	{OP_WR, XCM_REG_STOP_EVNT_ID, 0x31},
-	{OP_WR, XCM_REG_STORM_WEIGHT, 0x3},
-	{OP_WR, XCM_REG_TSEM_WEIGHT, 0x6},
-	{OP_WR, XCM_REG_CSEM_WEIGHT, 0x3},
-	{OP_WR, XCM_REG_USEM_WEIGHT, 0x3},
-	{OP_WR, XCM_REG_DORQ_WEIGHT, 0x2},
-	{OP_WR, XCM_REG_PBF_WEIGHT, 0x0},
-	{OP_WR, XCM_REG_NIG0_WEIGHT, 0x2},
-	{OP_WR, XCM_REG_CP_WEIGHT, 0x0},
-	{OP_WR, XCM_REG_XSDM_WEIGHT, 0x6},
-	{OP_WR, XCM_REG_XQM_P_WEIGHT, 0x4},
-	{OP_WR, XCM_REG_XQM_S_WEIGHT, 0x2},
-	{OP_WR, XCM_REG_TM_WEIGHT, 0x2},
-	{OP_WR, XCM_REG_XCM_XQM_USE_Q, 0x1},
-	{OP_WR, XCM_REG_XQM_BYP_ACT_UPD, 0x6},
-	{OP_WR, XCM_REG_UNA_GT_NXT_Q, 0x0},
-	{OP_WR, XCM_REG_AUX1_Q, 0x2},
-	{OP_WR, XCM_REG_AUX_CNT_FLG_Q_19, 0x1},
-	{OP_WR, XCM_REG_GR_ARB_TYPE, 0x1},
-	{OP_WR, XCM_REG_GR_LD0_PR, 0x1},
-	{OP_WR, XCM_REG_GR_LD1_PR, 0x2},
-	{OP_WR, XCM_REG_CFC_INIT_CRD, 0x1},
-	{OP_WR, XCM_REG_FIC0_INIT_CRD, 0x40},
-	{OP_WR, XCM_REG_FIC1_INIT_CRD, 0x40},
-	{OP_WR, XCM_REG_TM_INIT_CRD, 0x4},
-	{OP_WR, XCM_REG_XQM_INIT_CRD, 0x20},
-	{OP_WR, XCM_REG_XX_INIT_CRD, 0x2},
-	{OP_WR_E1, XCM_REG_XX_MSG_NUM, 0x1f},
-	{OP_WR_E1H, XCM_REG_XX_MSG_NUM, 0x20},
-	{OP_ZR, XCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02d4},
-	{OP_SW_E1H, XCM_REG_XX_DESCR_TABLE, 0x1f0329},
-	{OP_WR, XCM_REG_N_SM_CTX_LD_0, 0xf},
-	{OP_WR, XCM_REG_N_SM_CTX_LD_1, 0x7},
-	{OP_WR, XCM_REG_N_SM_CTX_LD_2, 0xb},
-	{OP_WR, XCM_REG_N_SM_CTX_LD_3, 0xe},
-	{OP_ZR_E1, XCM_REG_N_SM_CTX_LD_4, 0x4},
-	{OP_WR_E1H, XCM_REG_N_SM_CTX_LD_4, 0xe},
-	{OP_ZR_E1H, XCM_REG_N_SM_CTX_LD_5, 0x3},
-	{OP_WR, XCM_REG_XCM_REG0_SZ, 0x4},
-	{OP_WR, XCM_REG_XCM_STORM0_IFEN, 0x1},
-	{OP_WR, XCM_REG_XCM_STORM1_IFEN, 0x1},
-	{OP_WR, XCM_REG_XCM_XQM_IFEN, 0x1},
-	{OP_WR, XCM_REG_STORM_XCM_IFEN, 0x1},
-	{OP_WR, XCM_REG_XQM_XCM_IFEN, 0x1},
-	{OP_WR, XCM_REG_XSDM_IFEN, 0x1},
-	{OP_WR, XCM_REG_TM_XCM_IFEN, 0x1},
-	{OP_WR, XCM_REG_XCM_TM_IFEN, 0x1},
-	{OP_WR, XCM_REG_TSEM_IFEN, 0x1},
-	{OP_WR, XCM_REG_CSEM_IFEN, 0x1},
-	{OP_WR, XCM_REG_USEM_IFEN, 0x1},
-	{OP_WR, XCM_REG_DORQ_IFEN, 0x1},
-	{OP_WR, XCM_REG_PBF_IFEN, 0x1},
-	{OP_WR, XCM_REG_NIG0_IFEN, 0x1},
-	{OP_WR, XCM_REG_NIG1_IFEN, 0x1},
-	{OP_WR, XCM_REG_CDU_AG_WR_IFEN, 0x1},
-	{OP_WR, XCM_REG_CDU_AG_RD_IFEN, 0x1},
-	{OP_WR, XCM_REG_CDU_SM_WR_IFEN, 0x1},
-	{OP_WR, XCM_REG_CDU_SM_RD_IFEN, 0x1},
-	{OP_WR, XCM_REG_XCM_CFC_IFEN, 0x1},
-#define XCM_COMMON_END          1538
-#define XCM_PORT0_START         1538
-	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-#define XCM_PORT0_END           1546
-#define XCM_PORT1_START         1546
-	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-#define XCM_PORT1_END           1554
-#define XCM_FUNC0_START         1554
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC0_END           1563
-#define XCM_FUNC1_START         1563
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC1_END           1572
-#define XCM_FUNC2_START         1572
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC2_END           1581
-#define XCM_FUNC3_START         1581
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC3_END           1590
-#define XCM_FUNC4_START         1590
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC4_END           1599
-#define XCM_FUNC5_START         1599
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC5_END           1608
-#define XCM_FUNC6_START         1608
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD00, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD10, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC6_END           1617
-#define XCM_FUNC7_START         1617
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
-	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11, 0x0},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD01, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_CMD11, 0x2},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
-	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC7_END           1626
-#define XSEM_COMMON_START       1626
-	{OP_RD, XSEM_REG_MSG_NUM_FIC0, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FIC1, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FOC0, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FOC1, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FOC2, 0x0},
-	{OP_RD, XSEM_REG_MSG_NUM_FOC3, 0x0},
-	{OP_WR, XSEM_REG_ARB_ELEMENT0, 0x1},
-	{OP_WR, XSEM_REG_ARB_ELEMENT1, 0x2},
-	{OP_WR, XSEM_REG_ARB_ELEMENT2, 0x3},
-	{OP_WR, XSEM_REG_ARB_ELEMENT3, 0x0},
-	{OP_WR, XSEM_REG_ARB_ELEMENT4, 0x4},
-	{OP_WR, XSEM_REG_ARB_CYCLE_SIZE, 0x1},
-	{OP_WR, XSEM_REG_TS_0_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_1_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_2_AS, 0x4},
-	{OP_WR, XSEM_REG_TS_3_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_4_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_5_AS, 0x3},
-	{OP_WR, XSEM_REG_TS_6_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_7_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_8_AS, 0x4},
-	{OP_WR, XSEM_REG_TS_9_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_10_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_11_AS, 0x3},
-	{OP_WR, XSEM_REG_TS_12_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_13_AS, 0x1},
-	{OP_WR, XSEM_REG_TS_14_AS, 0x4},
-	{OP_WR, XSEM_REG_TS_15_AS, 0x0},
-	{OP_WR, XSEM_REG_TS_16_AS, 0x4},
-	{OP_WR, XSEM_REG_TS_17_AS, 0x3},
-	{OP_ZR, XSEM_REG_TS_18_AS, 0x2},
-	{OP_WR, XSEM_REG_ENABLE_IN, 0x3fff},
-	{OP_WR, XSEM_REG_ENABLE_OUT, 0x3ff},
-	{OP_WR, XSEM_REG_FIC0_DISABLE, 0x0},
-	{OP_WR, XSEM_REG_FIC1_DISABLE, 0x0},
-	{OP_WR, XSEM_REG_PAS_DISABLE, 0x0},
-	{OP_WR, XSEM_REG_THREADS_LIST, 0xffff},
-	{OP_ZR, XSEM_REG_PASSIVE_BUFFER, 0x800},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x18bc0, 0x1},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x18000, 0x0},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x18040, 0x18},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x18080, 0xc},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x180c0, 0x66},
-	{OP_WR_ASIC, XSEM_REG_FAST_MEMORY + 0x18300, 0x7a120},
-	{OP_WR_EMUL, XSEM_REG_FAST_MEMORY + 0x18300, 0x138},
-	{OP_WR_FPGA, XSEM_REG_FAST_MEMORY + 0x18300, 0x1388},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x183c0, 0x1f4},
-	{OP_WR_ASIC, XSEM_REG_FAST_MEMORY + 0x18340, 0x1f4},
-	{OP_WR_EMUL, XSEM_REG_FAST_MEMORY + 0x18340, 0x0},
-	{OP_WR_FPGA, XSEM_REG_FAST_MEMORY + 0x18340, 0x5},
-	{OP_WR_EMUL, XSEM_REG_FAST_MEMORY + 0x18380, 0x4c4b4},
-	{OP_WR_ASIC, XSEM_REG_FAST_MEMORY + 0x18380, 0x1dcd6500},
-	{OP_WR_EMUL_E1H, XSEM_REG_FAST_MEMORY + 0x11480, 0x0},
-	{OP_WR_FPGA, XSEM_REG_FAST_MEMORY + 0x18380, 0x4c4b40},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3d60, 0x4},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x11480, 0x1},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d60 + 0x10, 0x202f3},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x29c8, 0x4},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3000, 0x48},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29c8 + 0x10, 0x20348},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1020, 0xc8},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2080, 0x48},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1000, 0x2},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x9020, 0xc8},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3128, 0x8e},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x9000, 0x2},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3368, 0x0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x21a8, 0x86},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202f5},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2000, 0x20},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402f7},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x23c8, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3e20, 0x202fb},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x23d0, 0x2034a},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1518, 0x1},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2498, 0x4034c},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1830, 0x0},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2c20, 0x0},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1838, 0x0},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2c10, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202fd},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2c08, 0x20350},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4ac0, 0x2},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3010, 0x1},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b00, 0x4},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x4040, 0x10},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f48, 0x202ff},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x4000, 0x100352},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6ac0, 0x2},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b00, 0x4},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x8408, 0x20362},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x100301},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c00, 0x100364},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80311},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80374},
-	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x2000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x80319},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8037c},
-	{OP_ZP_E1, XSEM_REG_INT_TABLE, 0xb50000},
-	{OP_ZP_E1H, XSEM_REG_INT_TABLE, 0xbd0000},
-	{OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130321},
-	{OP_WR_64_E1H, XSEM_REG_INT_TABLE + 0x3a8, 0xb0384},
-	{OP_ZP_E1, XSEM_REG_PRAM, 0x33660000},
-	{OP_ZP_E1H, XSEM_REG_PRAM, 0x34060000},
-	{OP_ZP_E1, XSEM_REG_PRAM + 0x8000, 0x38b30cda},
-	{OP_ZP_E1H, XSEM_REG_PRAM + 0x8000, 0x37960d02},
-	{OP_ZP_E1, XSEM_REG_PRAM + 0x10000, 0x3bb11b07},
-	{OP_ZP_E1H, XSEM_REG_PRAM + 0x10000, 0x3bc31ae8},
-	{OP_ZP_E1, XSEM_REG_PRAM + 0x18000, 0x2a2629f4},
-	{OP_ZP_E1H, XSEM_REG_PRAM + 0x18000, 0x382629d9},
-	{OP_WR_64_E1, XSEM_REG_PRAM + 0x1d6c0, 0x45280323},
-	{OP_ZP_E1H, XSEM_REG_PRAM + 0x20000, 0x124537e3},
-	{OP_WR_64_E1H, XSEM_REG_PRAM + 0x22220, 0x3bbc0386},
-#define XSEM_COMMON_END         1741
-#define XSEM_PORT0_START        1741
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3ba0, 0x14},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc000, 0xfc},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c40, 0x24},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x24a8, 0x14},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1400, 0xa},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2548, 0x24},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1450, 0x6},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2668, 0x24},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3378, 0xfc},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2788, 0x24},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b58, 0x0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x28a8, 0x24},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d78, 0x20325},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa000, 0x28},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d88, 0x100327},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa140, 0xc},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1500, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29e0, 0x20388},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1508, 0x1},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3000, 0x1},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5020, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5030, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5000, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5010, 0x2},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x5040, 0x0},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x5208, 0x1},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x5048, 0xe},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ac8, 0x2038a},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50b8, 0x1},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b10, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x20337},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d20, 0x4},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b10, 0x42},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d20, 0x4},
-#define XSEM_PORT0_END          1775
-#define XSEM_PORT1_START        1775
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3bf0, 0x14},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc3f0, 0xfc},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3cd0, 0x24},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x24f8, 0x14},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1428, 0xa},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x25d8, 0x24},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x1468, 0x6},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x26f8, 0x24},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3768, 0xfc},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2818, 0x24},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b5c, 0x0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2938, 0x24},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d80, 0x20339},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa0a0, 0x28},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3dc8, 0x10033b},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa170, 0xc},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1504, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29e8, 0x2038c},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x150c, 0x1},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3004, 0x1},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5028, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5038, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5008, 0x2},
-	{OP_ZR, XSEM_REG_FAST_MEMORY + 0x5018, 0x2},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x5044, 0x0},
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x520c, 0x1},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x5080, 0xe},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ad0, 0x2038e},
-	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50bc, 0x1},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6c18, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2034b},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d30, 0x4},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4c18, 0x42},
-	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d30, 0x4},
-#define XSEM_PORT1_END          1809
-#define XSEM_FUNC0_START        1809
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e0, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29f0, 0x100390},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5048, 0xe},
-#define XSEM_FUNC0_END          1812
-#define XSEM_FUNC1_START        1812
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e4, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a30, 0x1003a0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5080, 0xe},
-#define XSEM_FUNC1_END          1815
-#define XSEM_FUNC2_START        1815
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e8, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a70, 0x1003b0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50b8, 0xe},
-#define XSEM_FUNC2_END          1818
-#define XSEM_FUNC3_START        1818
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7ec, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2ab0, 0x1003c0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50f0, 0xe},
-#define XSEM_FUNC3_END          1821
-#define XSEM_FUNC4_START        1821
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f0, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2af0, 0x1003d0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5128, 0xe},
-#define XSEM_FUNC4_END          1824
-#define XSEM_FUNC5_START        1824
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f4, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2b30, 0x1003e0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5160, 0xe},
-#define XSEM_FUNC5_END          1827
-#define XSEM_FUNC6_START        1827
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f8, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2b70, 0x1003f0},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5198, 0xe},
-#define XSEM_FUNC6_END          1830
-#define XSEM_FUNC7_START        1830
-	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7fc, 0x0},
-	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2bb0, 0x100400},
-	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x51d0, 0xe},
-#define XSEM_FUNC7_END          1833
-#define CDU_COMMON_START        1833
-	{OP_WR, CDU_REG_CDU_CONTROL0, 0x1},
-	{OP_WR_E1H, CDU_REG_MF_MODE, 0x1},
-	{OP_WR, CDU_REG_CDU_CHK_MASK0, 0x3d000},
-	{OP_WR, CDU_REG_CDU_CHK_MASK1, 0x3d},
-	{OP_WB_E1, CDU_REG_L1TT, 0x200034d},
-	{OP_WB_E1H, CDU_REG_L1TT, 0x2000410},
-	{OP_WB_E1, CDU_REG_MATT, 0x20054d},
-	{OP_WB_E1H, CDU_REG_MATT, 0x280610},
-	{OP_ZR_E1, CDU_REG_MATT + 0x80, 0x2},
-	{OP_WB_E1, CDU_REG_MATT + 0x88, 0x6056d},
-	{OP_ZR, CDU_REG_MATT + 0xa0, 0x18},
-#define CDU_COMMON_END          1844
-#define DMAE_COMMON_START       1844
-	{OP_ZR, DMAE_REG_CMD_MEM, 0xe0},
-	{OP_WR, DMAE_REG_CRC16C_INIT, 0x0},
-	{OP_WR, DMAE_REG_CRC16T10_INIT, 0x1},
-	{OP_WR_E1, DMAE_REG_PXP_REQ_INIT_CRD, 0x1},
-	{OP_WR_E1H, DMAE_REG_PXP_REQ_INIT_CRD, 0x2},
-	{OP_WR, DMAE_REG_PCI_IFEN, 0x1},
-	{OP_WR, DMAE_REG_GRC_IFEN, 0x1},
-#define DMAE_COMMON_END         1851
-#define PXP_COMMON_START        1851
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50573},
-	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT + 0x400, 0x50638},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x50578},
-	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT, 0x5063d},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5057d},
-	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT + 0x20, 0x50642},
-#define PXP_COMMON_END          1857
-#define CFC_COMMON_START        1857
-	{OP_ZR_E1H, CFC_REG_LINK_LIST, 0x100},
-	{OP_WR, CFC_REG_CONTROL0, 0x10},
-	{OP_WR, CFC_REG_DISABLE_ON_ERROR, 0x3fff},
-	{OP_WR, CFC_REG_INTERFACES, 0x280000},
-	{OP_WR, CFC_REG_LCREQ_WEIGHTS, 0x84924a},
-	{OP_WR, CFC_REG_INTERFACES, 0x0},
-#define CFC_COMMON_END          1863
-#define HC_COMMON_START         1863
-	{OP_ZR_E1, HC_REG_USTORM_ADDR_FOR_COALESCE, 0x4},
-#define HC_COMMON_END           1864
-#define HC_PORT0_START          1864
-	{OP_WR_E1, HC_REG_CONFIG_0, 0x1080},
-	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_0, 0x2},
-	{OP_WR_E1, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1, HC_REG_LEADING_EDGE_0, 0xffff},
-	{OP_WR_E1, HC_REG_TRAILING_EDGE_0, 0xffff},
-	{OP_WR_E1, HC_REG_AGG_INT_0, 0x0},
-	{OP_WR_E1, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_PORT0_END            1882
-#define HC_PORT1_START          1882
-	{OP_WR_E1, HC_REG_CONFIG_1, 0x1080},
-	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_1, 0x2},
-	{OP_WR_E1, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1, HC_REG_LEADING_EDGE_1, 0xffff},
-	{OP_WR_E1, HC_REG_TRAILING_EDGE_1, 0xffff},
-	{OP_WR_E1, HC_REG_AGG_INT_1, 0x0},
-	{OP_WR_E1, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_PORT1_END            1900
-#define HC_FUNC0_START          1900
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x0},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1H, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC0_END            1915
-#define HC_FUNC1_START          1915
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x1},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1H, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC1_END            1930
-#define HC_FUNC2_START          1930
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x2},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1H, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC2_END            1945
-#define HC_FUNC3_START          1945
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x3},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1H, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC3_END            1960
-#define HC_FUNC4_START          1960
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x4},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1H, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC4_END            1975
-#define HC_FUNC5_START          1975
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x5},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1H, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC5_END            1990
-#define HC_FUNC6_START          1990
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x6},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_0, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_0, 0x0},
-	{OP_ZR_E1H, HC_REG_P0_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC6_END            2005
-#define HC_FUNC7_START          2005
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
-	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x7},
-	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
-	{OP_WR_E1H, HC_REG_ATTN_IDX + 0x4, 0x0},
-	{OP_ZR_E1H, HC_REG_ATTN_BIT + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_VQID_1, 0x2b5},
-	{OP_WR_E1H, HC_REG_PCI_CONFIG_1, 0x0},
-	{OP_ZR_E1H, HC_REG_P1_PROD_CONS, 0x4a},
-	{OP_WR_E1H, HC_REG_INT_MASK + 0x4, 0x1ffff},
-	{OP_ZR_E1H, HC_REG_PBA_COMMAND + 0x8, 0x2},
-	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1a80},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x90, 0x24},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
-	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC7_END            2020
-#define PXP2_COMMON_START       2020
-	{OP_WR_E1H, PXP2_REG_RQ_DRAM_ALIGN, 0x1},
-	{OP_WR, PXP2_REG_PGL_CONTROL0, 0xe38340},
-	{OP_WR, PXP2_REG_PGL_CONTROL1, 0x3c10},
-	{OP_WR_E1H, PXP2_REG_RQ_ELT_DISABLE, 0x1},
-	{OP_WR_E1H, PXP2_REG_WR_REV_MODE, 0x0},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_0, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_1, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_2, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_3, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_4, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_5, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_6, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_TSDM_7, 0xffffffff},
-	{OP_WR_E1, PXP2_REG_PGL_INT_USDM_1, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_2, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_3, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_4, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_5, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_6, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_USDM_7, 0xffffffff},
-	{OP_WR_E1H, PXP2_REG_PGL_INT_XSDM_1, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_2, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_3, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_4, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_5, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_6, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_XSDM_7, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_0, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_1, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_2, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_3, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_4, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_5, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_6, 0xffffffff},
-	{OP_WR, PXP2_REG_PGL_INT_CSDM_7, 0xffffffff},
-	{OP_WR_E1, PXP2_REG_PGL_INT_XSDM_0, 0xffff3330},
-	{OP_WR_E1H, PXP2_REG_PGL_INT_XSDM_0, 0xff802000},
-	{OP_WR_E1, PXP2_REG_PGL_INT_XSDM_1, 0xffff3340},
-	{OP_WR_E1H, PXP2_REG_PGL_INT_USDM_0, 0xf0005000},
-	{OP_WR_E1, PXP2_REG_PGL_INT_USDM_0, 0xf0003000},
-	{OP_WR_E1H, PXP2_REG_PGL_INT_USDM_1, 0xf0008000},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ6, 0x8},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ9, 0x8},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ10, 0x8},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ11, 0x2},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ17, 0x4},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ18, 0x5},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ19, 0x4},
-	{OP_WR, PXP2_REG_RD_MAX_BLKS_VQ22, 0x0},
-	{OP_WR, PXP2_REG_RD_START_INIT, 0x1},
-	{OP_WR, PXP2_REG_WR_DMAE_TH, 0x3f},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD0, 0x40},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD1, 0x1808},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD2, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD3, 0x803},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD4, 0x40},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD5, 0x3},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD6, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD7, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD8, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD9, 0x10003},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD10, 0x803},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD11, 0x803},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD12, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD13, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD14, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD15, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD16, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD17, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD18, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD19, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD20, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD22, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD23, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD24, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD25, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD26, 0x3},
-	{OP_WR, PXP2_REG_RQ_BW_RD_ADD27, 0x3},
-	{OP_WR, PXP2_REG_PSWRQ_BW_ADD28, 0x2403},
-	{OP_WR, PXP2_REG_RQ_BW_WR_ADD29, 0x2f},
-	{OP_WR, PXP2_REG_RQ_BW_WR_ADD30, 0x9},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND0, 0x19},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB1, 0x184},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB2, 0x183},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB3, 0x306},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND4, 0x19},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND5, 0x6},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB6, 0x306},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB7, 0x306},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB8, 0x306},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB9, 0xc86},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB10, 0x306},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB11, 0x306},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND12, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND13, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND14, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND15, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND16, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND17, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND18, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND19, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND20, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND22, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND23, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND24, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND25, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND26, 0x6},
-	{OP_WR, PXP2_REG_RQ_BW_RD_UBOUND27, 0x6},
-	{OP_WR, PXP2_REG_PSWRQ_BW_UB28, 0x306},
-	{OP_WR, PXP2_REG_RQ_BW_WR_UBOUND29, 0x13},
-	{OP_WR, PXP2_REG_RQ_BW_WR_UBOUND30, 0x6},
-	{OP_WR, PXP2_REG_PSWRQ_BW_L1, 0x1004},
-	{OP_WR, PXP2_REG_PSWRQ_BW_L2, 0x1004},
-	{OP_WR, PXP2_REG_PSWRQ_BW_RD, 0x106440},
-	{OP_WR, PXP2_REG_PSWRQ_BW_WR, 0x106440},
-	{OP_WR_E1H, PXP2_REG_RQ_ILT_MODE, 0x1},
-	{OP_WR, PXP2_REG_RQ_RBC_DONE, 0x1},
-#define PXP2_COMMON_END         2137
-#define MISC_AEU_COMMON_START   2137
-	{OP_ZR, MISC_REG_AEU_GENERAL_ATTN_0, 0x16},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_NIG_0, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_NIG_0, 0x55555555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE3_NIG_0, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_NIG_0, 0xf0000000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_PXP_0, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_PXP_0, 0x55555555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE3_PXP_0, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_PXP_0, 0xf0000000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_NIG_1, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_NIG_1, 0x55555555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE3_NIG_1, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_NIG_1, 0xf0000000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_PXP_1, 0x0},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_PXP_1, 0x10000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE3_PXP_1, 0x5014},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_PXP_1, 0x0},
-	{OP_WR_E1H, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0xc00},
-	{OP_WR_E1H, MISC_REG_AEU_GENERAL_MASK, 0x3},
-#define MISC_AEU_COMMON_END     2156
-#define MISC_AEU_PORT0_START    2156
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xbf5c0000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xff5c0000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0, 0xfff51fef},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0, 0xfff55fff},
-	{OP_WR, MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0, 0xffff},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, 0x500003e0},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, 0xf00003e0},
-	{OP_WR, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1, 0x0},
-	{OP_WR, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1, 0xa000},
-	{OP_ZR, MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1, 0x5},
-	{OP_WR, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2, 0xfe00000},
-	{OP_ZR_E1, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3, 0x14},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3, 0x7},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_NIG_0, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4, 0x400},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_NIG_0, 0x55555555},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE3_NIG_0, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5, 0x1000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_NIG_0, 0x0},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_PXP_0, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6, 0x4000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_PXP_0, 0x55555555},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE3_PXP_0, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7, 0x10000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_PXP_0, 0x0},
-	{OP_ZR_E1H, MISC_REG_AEU_INVERTER_1_FUNC_0, 0x4},
-	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_0, 0x0},
-	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_0, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_0, 0x7},
-#define MISC_AEU_PORT0_END      2188
-#define MISC_AEU_PORT1_START    2188
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xbf5c0000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xff5c0000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0, 0xfff51fef},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0, 0xfff55fff},
-	{OP_WR, MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0, 0xffff},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, 0x500003e0},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, 0xf00003e0},
-	{OP_WR, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1, 0x0},
-	{OP_WR, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1, 0xa000},
-	{OP_ZR, MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1, 0x5},
-	{OP_WR, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2, 0xfe00000},
-	{OP_ZR_E1, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3, 0x14},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3, 0x7},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_NIG_1, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4, 0x800},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_NIG_1, 0x55555555},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE3_NIG_1, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5, 0x2000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_NIG_1, 0x0},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE1_PXP_1, 0x55540000},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6, 0x8000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE2_PXP_1, 0x55555555},
-	{OP_ZR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE3_PXP_1, 0x5555},
-	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7, 0x20000},
-	{OP_WR_E1, MISC_REG_AEU_ENABLE4_PXP_1, 0x0},
-	{OP_ZR_E1H, MISC_REG_AEU_INVERTER_1_FUNC_1, 0x4},
-	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_1, 0x0},
-	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_1, 0x3},
-	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_1, 0x7},
-#define MISC_AEU_PORT1_END      2220
-
-};
-
-static const u32 init_data_e1[] = {
-	0x00010000, 0x000204c0, 0x00030980, 0x00040e40, 0x00051300, 0x000617c0,
-	0x00071c80, 0x00082140, 0x00092600, 0x000a2ac0, 0x000b2f80, 0x000c3440,
-	0x000d3900, 0x000e3dc0, 0x000f4280, 0x00104740, 0x00114c00, 0x001250c0,
-	0x00135580, 0x00145a40, 0x00155f00, 0x001663c0, 0x00176880, 0x00186d40,
-	0x00197200, 0x001a76c0, 0x001b7b80, 0x001c8040, 0x001d8500, 0x001e89c0,
-	0x001f8e80, 0x00209340, 0x00002000, 0x00004000, 0x00006000, 0x00008000,
-	0x0000a000, 0x0000c000, 0x0000e000, 0x00010000, 0x00012000, 0x00014000,
-	0x00016000, 0x00018000, 0x0001a000, 0x0001c000, 0x0001e000, 0x00020000,
-	0x00022000, 0x00024000, 0x00026000, 0x00028000, 0x0002a000, 0x0002c000,
-	0x0002e000, 0x00030000, 0x00032000, 0x00034000, 0x00036000, 0x00038000,
-	0x0003a000, 0x0003c000, 0x0003e000, 0x00040000, 0x00042000, 0x00044000,
-	0x00046000, 0x00048000, 0x0004a000, 0x0004c000, 0x0004e000, 0x00050000,
-	0x00052000, 0x00054000, 0x00056000, 0x00058000, 0x0005a000, 0x0005c000,
-	0x0005e000, 0x00060000, 0x00062000, 0x00064000, 0x00066000, 0x00068000,
-	0x0006a000, 0x0006c000, 0x0006e000, 0x00070000, 0x00072000, 0x00074000,
-	0x00076000, 0x00078000, 0x0007a000, 0x0007c000, 0x0007e000, 0x00080000,
-	0x00082000, 0x00084000, 0x00086000, 0x00088000, 0x0008a000, 0x0008c000,
-	0x0008e000, 0x00090000, 0x00092000, 0x00094000, 0x00096000, 0x00098000,
-	0x0009a000, 0x0009c000, 0x0009e000, 0x000a0000, 0x000a2000, 0x000a4000,
-	0x000a6000, 0x000a8000, 0x000aa000, 0x000ac000, 0x000ae000, 0x000b0000,
-	0x000b2000, 0x000b4000, 0x000b6000, 0x000b8000, 0x000ba000, 0x000bc000,
-	0x000be000, 0x000c0000, 0x000c2000, 0x000c4000, 0x000c6000, 0x000c8000,
-	0x000ca000, 0x000cc000, 0x000ce000, 0x000d0000, 0x000d2000, 0x000d4000,
-	0x000d6000, 0x000d8000, 0x000da000, 0x000dc000, 0x000de000, 0x000e0000,
-	0x000e2000, 0x000e4000, 0x000e6000, 0x000e8000, 0x000ea000, 0x000ec000,
-	0x000ee000, 0x000f0000, 0x000f2000, 0x000f4000, 0x000f6000, 0x000f8000,
-	0x000fa000, 0x000fc000, 0x000fe000, 0x00100000, 0x00102000, 0x00104000,
-	0x00106000, 0x00108000, 0x0010a000, 0x0010c000, 0x0010e000, 0x00110000,
-	0x00112000, 0x00114000, 0x00116000, 0x00118000, 0x0011a000, 0x0011c000,
-	0x0011e000, 0x00120000, 0x00122000, 0x00124000, 0x00126000, 0x00128000,
-	0x0012a000, 0x0012c000, 0x0012e000, 0x00130000, 0x00132000, 0x00134000,
-	0x00136000, 0x00138000, 0x0013a000, 0x0013c000, 0x0013e000, 0x00140000,
-	0x00142000, 0x00144000, 0x00146000, 0x00148000, 0x0014a000, 0x0014c000,
-	0x0014e000, 0x00150000, 0x00152000, 0x00154000, 0x00156000, 0x00158000,
-	0x0015a000, 0x0015c000, 0x0015e000, 0x00160000, 0x00162000, 0x00164000,
-	0x00166000, 0x00168000, 0x0016a000, 0x0016c000, 0x0016e000, 0x00170000,
-	0x00172000, 0x00174000, 0x00176000, 0x00178000, 0x0017a000, 0x0017c000,
-	0x0017e000, 0x00180000, 0x00182000, 0x00184000, 0x00186000, 0x00188000,
-	0x0018a000, 0x0018c000, 0x0018e000, 0x00190000, 0x00192000, 0x00194000,
-	0x00196000, 0x00198000, 0x0019a000, 0x0019c000, 0x0019e000, 0x001a0000,
-	0x001a2000, 0x001a4000, 0x001a6000, 0x001a8000, 0x001aa000, 0x001ac000,
-	0x001ae000, 0x001b0000, 0x001b2000, 0x001b4000, 0x001b6000, 0x001b8000,
-	0x001ba000, 0x001bc000, 0x001be000, 0x001c0000, 0x001c2000, 0x001c4000,
-	0x001c6000, 0x001c8000, 0x001ca000, 0x001cc000, 0x001ce000, 0x001d0000,
-	0x001d2000, 0x001d4000, 0x001d6000, 0x001d8000, 0x001da000, 0x001dc000,
-	0x001de000, 0x001e0000, 0x001e2000, 0x001e4000, 0x001e6000, 0x001e8000,
-	0x001ea000, 0x001ec000, 0x001ee000, 0x001f0000, 0x001f2000, 0x001f4000,
-	0x001f6000, 0x001f8000, 0x001fa000, 0x001fc000, 0x001fe000, 0x00200000,
-	0x00202000, 0x00204000, 0x00206000, 0x00208000, 0x0020a000, 0x0020c000,
-	0x0020e000, 0x00210000, 0x00212000, 0x00214000, 0x00216000, 0x00218000,
-	0x0021a000, 0x0021c000, 0x0021e000, 0x00220000, 0x00222000, 0x00224000,
-	0x00226000, 0x00228000, 0x0022a000, 0x0022c000, 0x0022e000, 0x00230000,
-	0x00232000, 0x00234000, 0x00236000, 0x00238000, 0x0023a000, 0x0023c000,
-	0x0023e000, 0x00240000, 0x00242000, 0x00244000, 0x00246000, 0x00248000,
-	0x0024a000, 0x0024c000, 0x0024e000, 0x00250000, 0x00252000, 0x00254000,
-	0x00256000, 0x00258000, 0x0025a000, 0x0025c000, 0x0025e000, 0x00260000,
-	0x00262000, 0x00264000, 0x00266000, 0x00268000, 0x0026a000, 0x0026c000,
-	0x0026e000, 0x00270000, 0x00272000, 0x00274000, 0x00276000, 0x00278000,
-	0x0027a000, 0x0027c000, 0x0027e000, 0x00280000, 0x00282000, 0x00284000,
-	0x00286000, 0x00288000, 0x0028a000, 0x0028c000, 0x0028e000, 0x00290000,
-	0x00292000, 0x00294000, 0x00296000, 0x00298000, 0x0029a000, 0x0029c000,
-	0x0029e000, 0x002a0000, 0x002a2000, 0x002a4000, 0x002a6000, 0x002a8000,
-	0x002aa000, 0x002ac000, 0x002ae000, 0x002b0000, 0x002b2000, 0x002b4000,
-	0x002b6000, 0x002b8000, 0x002ba000, 0x002bc000, 0x002be000, 0x002c0000,
-	0x002c2000, 0x002c4000, 0x002c6000, 0x002c8000, 0x002ca000, 0x002cc000,
-	0x002ce000, 0x002d0000, 0x002d2000, 0x002d4000, 0x002d6000, 0x002d8000,
-	0x002da000, 0x002dc000, 0x002de000, 0x002e0000, 0x002e2000, 0x002e4000,
-	0x002e6000, 0x002e8000, 0x002ea000, 0x002ec000, 0x002ee000, 0x002f0000,
-	0x002f2000, 0x002f4000, 0x002f6000, 0x002f8000, 0x002fa000, 0x002fc000,
-	0x002fe000, 0x00300000, 0x00302000, 0x00304000, 0x00306000, 0x00308000,
-	0x0030a000, 0x0030c000, 0x0030e000, 0x00310000, 0x00312000, 0x00314000,
-	0x00316000, 0x00318000, 0x0031a000, 0x0031c000, 0x0031e000, 0x00320000,
-	0x00322000, 0x00324000, 0x00326000, 0x00328000, 0x0032a000, 0x0032c000,
-	0x0032e000, 0x00330000, 0x00332000, 0x00334000, 0x00336000, 0x00338000,
-	0x0033a000, 0x0033c000, 0x0033e000, 0x00340000, 0x00342000, 0x00344000,
-	0x00346000, 0x00348000, 0x0034a000, 0x0034c000, 0x0034e000, 0x00350000,
-	0x00352000, 0x00354000, 0x00356000, 0x00358000, 0x0035a000, 0x0035c000,
-	0x0035e000, 0x00360000, 0x00362000, 0x00364000, 0x00366000, 0x00368000,
-	0x0036a000, 0x0036c000, 0x0036e000, 0x00370000, 0x00372000, 0x00374000,
-	0x00376000, 0x00378000, 0x0037a000, 0x0037c000, 0x0037e000, 0x00380000,
-	0x00382000, 0x00384000, 0x00386000, 0x00388000, 0x0038a000, 0x0038c000,
-	0x0038e000, 0x00390000, 0x00392000, 0x00394000, 0x00396000, 0x00398000,
-	0x0039a000, 0x0039c000, 0x0039e000, 0x003a0000, 0x003a2000, 0x003a4000,
-	0x003a6000, 0x003a8000, 0x003aa000, 0x003ac000, 0x003ae000, 0x003b0000,
-	0x003b2000, 0x003b4000, 0x003b6000, 0x003b8000, 0x003ba000, 0x003bc000,
-	0x003be000, 0x003c0000, 0x003c2000, 0x003c4000, 0x003c6000, 0x003c8000,
-	0x003ca000, 0x003cc000, 0x003ce000, 0x003d0000, 0x003d2000, 0x003d4000,
-	0x003d6000, 0x003d8000, 0x003da000, 0x003dc000, 0x003de000, 0x003e0000,
-	0x003e2000, 0x003e4000, 0x003e6000, 0x003e8000, 0x003ea000, 0x003ec000,
-	0x003ee000, 0x003f0000, 0x003f2000, 0x003f4000, 0x003f6000, 0x003f8000,
-	0x003fa000, 0x003fc000, 0x003fe000, 0x003fe001, 0x00000000, 0x000001ff,
-	0x00000200, 0x00000001, 0x00000003, 0x00bebc20, 0x00000003, 0x00bebc20,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0x00000000, 0x00007ff8, 0x00000000, 0x00003500,
-	0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000003,
-	0x00bebc20, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff,
-	0x00000003, 0x00bebc20, 0x00002000, 0x000040c0, 0x00006180, 0x00008240,
-	0x0000a300, 0x0000c3c0, 0x0000e480, 0x00010540, 0x00012600, 0x000146c0,
-	0x00016780, 0x00018840, 0x0001a900, 0x0001c9c0, 0x0001ea80, 0x00020b40,
-	0x00022c00, 0x00024cc0, 0x00026d80, 0x00028e40, 0x0002af00, 0x0002cfc0,
-	0x0002f080, 0x00031140, 0x00033200, 0x000352c0, 0x00037380, 0x00039440,
-	0x0003b500, 0x0003d5c0, 0x0003f680, 0x00041740, 0x00043800, 0x000458c0,
-	0x00047980, 0x00049a40, 0x00008000, 0x00010380, 0x00018700, 0x00020a80,
-	0x00028e00, 0x00031180, 0x00039500, 0x00041880, 0x00049c00, 0x00051f80,
-	0x0005a300, 0x00062680, 0x0006aa00, 0x00072d80, 0x0007b100, 0x00083480,
-	0x0008b800, 0x00093b80, 0x0009bf00, 0x000a4280, 0x000ac600, 0x000b4980,
-	0x000bcd00, 0x000c5080, 0x000cd400, 0x000d5780, 0x000ddb00, 0x00001900,
-	0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
-	0x00000000, 0x00001500, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x00000000, 0x00007ff8, 0x00000000, 0x00001500, 0x00001000, 0x00002080,
-	0x00003100, 0x00004180, 0x00005200, 0x00006280, 0x00007300, 0x00008380,
-	0x00009400, 0x0000a480, 0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680,
-	0x0000f700, 0x00010780, 0x00011800, 0x00012880, 0x00013900, 0x00014980,
-	0x00015a00, 0x00016a80, 0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80,
-	0x0001bd00, 0x0001cd80, 0x0001de00, 0x0001ee80, 0x0001ff00, 0x10000000,
-	0x000028ad, 0x00000000, 0x00010001, 0x00350804, 0xccccccc1, 0xffffffff,
-	0xffffffff, 0x7058103c, 0x00000000, 0xcccc0201, 0xcccccccc, 0x00000000,
-	0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000,
-	0x00003500, 0x000e01b7, 0x011600d6, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x00100000, 0x00000000, 0x007201bb, 0x012300f3, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x00100000, 0x00000000, 0xfffffff3,
-	0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xfffffff1, 0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
-	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7,
-	0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xfffffff5, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x310fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
-	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
-	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7, 0x30efffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xfffffff3, 0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
-	0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
-	0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
-	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
-	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xffffff97, 0x056fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
-	0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
-	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffff8a, 0x042fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
-	0x05cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x300fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
-	0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
-	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x040fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
-	0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0x00100000, 0x00070100, 0x00028170, 0x000b8198, 0x00020250,
-	0x00010270, 0x000f0280, 0x00010370, 0x00080000, 0x00080080, 0x00028100,
-	0x000b8128, 0x000201e0, 0x00010200, 0x00070210, 0x00020280, 0x000f0000,
-	0x000800f0, 0x00028170, 0x000b8198, 0x00020250, 0x00010270, 0x000b8280,
-	0x00080338, 0x00100000, 0x00080100, 0x00028180, 0x000b81a8, 0x00020260,
-	0x00018280, 0x000e8298, 0x00080380, 0x00028000, 0x000b8028, 0x000200e0,
-	0x00010100, 0x00008110, 0x00000118, 0xcccccccc, 0xcccccccc, 0xcccccccc,
-	0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc,
-	0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000
-};
-
-static const u32 init_data_e1h[] = {
-	0x00010000, 0x000204c0, 0x00030980, 0x00040e40, 0x00051300, 0x000617c0,
-	0x00071c80, 0x00082140, 0x00092600, 0x000a2ac0, 0x000b2f80, 0x000c3440,
-	0x000d3900, 0x000e3dc0, 0x000f4280, 0x00104740, 0x00114c00, 0x001250c0,
-	0x00135580, 0x00145a40, 0x00155f00, 0x001663c0, 0x00176880, 0x00186d40,
-	0x00197200, 0x001a76c0, 0x001b7b80, 0x001c8040, 0x001d8500, 0x001e89c0,
-	0x001f8e80, 0x00209340, 0x00002000, 0x00004000, 0x00006000, 0x00008000,
-	0x0000a000, 0x0000c000, 0x0000e000, 0x00010000, 0x00012000, 0x00014000,
-	0x00016000, 0x00018000, 0x0001a000, 0x0001c000, 0x0001e000, 0x00020000,
-	0x00022000, 0x00024000, 0x00026000, 0x00028000, 0x0002a000, 0x0002c000,
-	0x0002e000, 0x00030000, 0x00032000, 0x00034000, 0x00036000, 0x00038000,
-	0x0003a000, 0x0003c000, 0x0003e000, 0x00040000, 0x00042000, 0x00044000,
-	0x00046000, 0x00048000, 0x0004a000, 0x0004c000, 0x0004e000, 0x00050000,
-	0x00052000, 0x00054000, 0x00056000, 0x00058000, 0x0005a000, 0x0005c000,
-	0x0005e000, 0x00060000, 0x00062000, 0x00064000, 0x00066000, 0x00068000,
-	0x0006a000, 0x0006c000, 0x0006e000, 0x00070000, 0x00072000, 0x00074000,
-	0x00076000, 0x00078000, 0x0007a000, 0x0007c000, 0x0007e000, 0x00080000,
-	0x00082000, 0x00084000, 0x00086000, 0x00088000, 0x0008a000, 0x0008c000,
-	0x0008e000, 0x00090000, 0x00092000, 0x00094000, 0x00096000, 0x00098000,
-	0x0009a000, 0x0009c000, 0x0009e000, 0x000a0000, 0x000a2000, 0x000a4000,
-	0x000a6000, 0x000a8000, 0x000aa000, 0x000ac000, 0x000ae000, 0x000b0000,
-	0x000b2000, 0x000b4000, 0x000b6000, 0x000b8000, 0x000ba000, 0x000bc000,
-	0x000be000, 0x000c0000, 0x000c2000, 0x000c4000, 0x000c6000, 0x000c8000,
-	0x000ca000, 0x000cc000, 0x000ce000, 0x000d0000, 0x000d2000, 0x000d4000,
-	0x000d6000, 0x000d8000, 0x000da000, 0x000dc000, 0x000de000, 0x000e0000,
-	0x000e2000, 0x000e4000, 0x000e6000, 0x000e8000, 0x000ea000, 0x000ec000,
-	0x000ee000, 0x000f0000, 0x000f2000, 0x000f4000, 0x000f6000, 0x000f8000,
-	0x000fa000, 0x000fc000, 0x000fe000, 0x00100000, 0x00102000, 0x00104000,
-	0x00106000, 0x00108000, 0x0010a000, 0x0010c000, 0x0010e000, 0x00110000,
-	0x00112000, 0x00114000, 0x00116000, 0x00118000, 0x0011a000, 0x0011c000,
-	0x0011e000, 0x00120000, 0x00122000, 0x00124000, 0x00126000, 0x00128000,
-	0x0012a000, 0x0012c000, 0x0012e000, 0x00130000, 0x00132000, 0x00134000,
-	0x00136000, 0x00138000, 0x0013a000, 0x0013c000, 0x0013e000, 0x00140000,
-	0x00142000, 0x00144000, 0x00146000, 0x00148000, 0x0014a000, 0x0014c000,
-	0x0014e000, 0x00150000, 0x00152000, 0x00154000, 0x00156000, 0x00158000,
-	0x0015a000, 0x0015c000, 0x0015e000, 0x00160000, 0x00162000, 0x00164000,
-	0x00166000, 0x00168000, 0x0016a000, 0x0016c000, 0x0016e000, 0x00170000,
-	0x00172000, 0x00174000, 0x00176000, 0x00178000, 0x0017a000, 0x0017c000,
-	0x0017e000, 0x00180000, 0x00182000, 0x00184000, 0x00186000, 0x00188000,
-	0x0018a000, 0x0018c000, 0x0018e000, 0x00190000, 0x00192000, 0x00194000,
-	0x00196000, 0x00198000, 0x0019a000, 0x0019c000, 0x0019e000, 0x001a0000,
-	0x001a2000, 0x001a4000, 0x001a6000, 0x001a8000, 0x001aa000, 0x001ac000,
-	0x001ae000, 0x001b0000, 0x001b2000, 0x001b4000, 0x001b6000, 0x001b8000,
-	0x001ba000, 0x001bc000, 0x001be000, 0x001c0000, 0x001c2000, 0x001c4000,
-	0x001c6000, 0x001c8000, 0x001ca000, 0x001cc000, 0x001ce000, 0x001d0000,
-	0x001d2000, 0x001d4000, 0x001d6000, 0x001d8000, 0x001da000, 0x001dc000,
-	0x001de000, 0x001e0000, 0x001e2000, 0x001e4000, 0x001e6000, 0x001e8000,
-	0x001ea000, 0x001ec000, 0x001ee000, 0x001f0000, 0x001f2000, 0x001f4000,
-	0x001f6000, 0x001f8000, 0x001fa000, 0x001fc000, 0x001fe000, 0x00200000,
-	0x00202000, 0x00204000, 0x00206000, 0x00208000, 0x0020a000, 0x0020c000,
-	0x0020e000, 0x00210000, 0x00212000, 0x00214000, 0x00216000, 0x00218000,
-	0x0021a000, 0x0021c000, 0x0021e000, 0x00220000, 0x00222000, 0x00224000,
-	0x00226000, 0x00228000, 0x0022a000, 0x0022c000, 0x0022e000, 0x00230000,
-	0x00232000, 0x00234000, 0x00236000, 0x00238000, 0x0023a000, 0x0023c000,
-	0x0023e000, 0x00240000, 0x00242000, 0x00244000, 0x00246000, 0x00248000,
-	0x0024a000, 0x0024c000, 0x0024e000, 0x00250000, 0x00252000, 0x00254000,
-	0x00256000, 0x00258000, 0x0025a000, 0x0025c000, 0x0025e000, 0x00260000,
-	0x00262000, 0x00264000, 0x00266000, 0x00268000, 0x0026a000, 0x0026c000,
-	0x0026e000, 0x00270000, 0x00272000, 0x00274000, 0x00276000, 0x00278000,
-	0x0027a000, 0x0027c000, 0x0027e000, 0x00280000, 0x00282000, 0x00284000,
-	0x00286000, 0x00288000, 0x0028a000, 0x0028c000, 0x0028e000, 0x00290000,
-	0x00292000, 0x00294000, 0x00296000, 0x00298000, 0x0029a000, 0x0029c000,
-	0x0029e000, 0x002a0000, 0x002a2000, 0x002a4000, 0x002a6000, 0x002a8000,
-	0x002aa000, 0x002ac000, 0x002ae000, 0x002b0000, 0x002b2000, 0x002b4000,
-	0x002b6000, 0x002b8000, 0x002ba000, 0x002bc000, 0x002be000, 0x002c0000,
-	0x002c2000, 0x002c4000, 0x002c6000, 0x002c8000, 0x002ca000, 0x002cc000,
-	0x002ce000, 0x002d0000, 0x002d2000, 0x002d4000, 0x002d6000, 0x002d8000,
-	0x002da000, 0x002dc000, 0x002de000, 0x002e0000, 0x002e2000, 0x002e4000,
-	0x002e6000, 0x002e8000, 0x002ea000, 0x002ec000, 0x002ee000, 0x002f0000,
-	0x002f2000, 0x002f4000, 0x002f6000, 0x002f8000, 0x002fa000, 0x002fc000,
-	0x002fe000, 0x00300000, 0x00302000, 0x00304000, 0x00306000, 0x00308000,
-	0x0030a000, 0x0030c000, 0x0030e000, 0x00310000, 0x00312000, 0x00314000,
-	0x00316000, 0x00318000, 0x0031a000, 0x0031c000, 0x0031e000, 0x00320000,
-	0x00322000, 0x00324000, 0x00326000, 0x00328000, 0x0032a000, 0x0032c000,
-	0x0032e000, 0x00330000, 0x00332000, 0x00334000, 0x00336000, 0x00338000,
-	0x0033a000, 0x0033c000, 0x0033e000, 0x00340000, 0x00342000, 0x00344000,
-	0x00346000, 0x00348000, 0x0034a000, 0x0034c000, 0x0034e000, 0x00350000,
-	0x00352000, 0x00354000, 0x00356000, 0x00358000, 0x0035a000, 0x0035c000,
-	0x0035e000, 0x00360000, 0x00362000, 0x00364000, 0x00366000, 0x00368000,
-	0x0036a000, 0x0036c000, 0x0036e000, 0x00370000, 0x00372000, 0x00374000,
-	0x00376000, 0x00378000, 0x0037a000, 0x0037c000, 0x0037e000, 0x00380000,
-	0x00382000, 0x00384000, 0x00386000, 0x00388000, 0x0038a000, 0x0038c000,
-	0x0038e000, 0x00390000, 0x00392000, 0x00394000, 0x00396000, 0x00398000,
-	0x0039a000, 0x0039c000, 0x0039e000, 0x003a0000, 0x003a2000, 0x003a4000,
-	0x003a6000, 0x003a8000, 0x003aa000, 0x003ac000, 0x003ae000, 0x003b0000,
-	0x003b2000, 0x003b4000, 0x003b6000, 0x003b8000, 0x003ba000, 0x003bc000,
-	0x003be000, 0x003c0000, 0x003c2000, 0x003c4000, 0x003c6000, 0x003c8000,
-	0x003ca000, 0x003cc000, 0x003ce000, 0x003d0000, 0x003d2000, 0x003d4000,
-	0x003d6000, 0x003d8000, 0x003da000, 0x003dc000, 0x003de000, 0x003e0000,
-	0x003e2000, 0x003e4000, 0x003e6000, 0x003e8000, 0x003ea000, 0x003ec000,
-	0x003ee000, 0x003f0000, 0x003f2000, 0x003f4000, 0x003f6000, 0x003f8000,
-	0x003fa000, 0x003fc000, 0x003fe000, 0x003fe001, 0x00000000, 0x000001ff,
-	0x00000200, 0x00000001, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x00000000, 0x00007ff8,
-	0x00000000, 0x00003500, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000,
-	0xffffffff, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff,
-	0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000003,
-	0x00bebc20, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000, 0xffffffff,
-	0x00000003, 0x00bebc20, 0xffffffff, 0x00000000, 0xffffffff, 0x00000000,
-	0xffffffff, 0x00000003, 0x00bebc20, 0xffffffff, 0x00000000, 0xffffffff,
-	0x00000000, 0xffffffff, 0x00000003, 0x00bebc20, 0xffffffff, 0x00000000,
-	0xffffffff, 0x00000000, 0xffffffff, 0x00000003, 0x00bebc20, 0xffffffff,
-	0x00000000, 0xffffffff, 0x00000000, 0xffffffff, 0x00000003, 0x00bebc20,
-	0x00002000, 0x000040c0, 0x00006180, 0x00008240, 0x0000a300, 0x0000c3c0,
-	0x0000e480, 0x00010540, 0x00012600, 0x000146c0, 0x00016780, 0x00018840,
-	0x0001a900, 0x0001c9c0, 0x0001ea80, 0x00020b40, 0x00022c00, 0x00024cc0,
-	0x00026d80, 0x00028e40, 0x0002af00, 0x0002cfc0, 0x0002f080, 0x00031140,
-	0x00033200, 0x000352c0, 0x00037380, 0x00039440, 0x0003b500, 0x0003d5c0,
-	0x0003f680, 0x00041740, 0x00043800, 0x000458c0, 0x00047980, 0x00049a40,
-	0x00008000, 0x00010380, 0x00018700, 0x00020a80, 0x00028e00, 0x00031180,
-	0x00039500, 0x00041880, 0x00049c00, 0x00051f80, 0x0005a300, 0x00062680,
-	0x0006aa00, 0x00072d80, 0x0007b100, 0x00083480, 0x0008b800, 0x00093b80,
-	0x0009bf00, 0x000a4280, 0x000ac600, 0x000b4980, 0x000bcd00, 0x000c5080,
-	0x000cd400, 0x000d5780, 0x000ddb00, 0x00001900, 0x00000028, 0x00100000,
-	0x00000000, 0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000,
-	0x00007ff8, 0x00000000, 0x00001500, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x00000000, 0x00007ff8, 0x00000000, 0x00001500, 0x00001000,
-	0x00002080, 0x00003100, 0x00004180, 0x00005200, 0x00006280, 0x00007300,
-	0x00008380, 0x00009400, 0x0000a480, 0x0000b500, 0x0000c580, 0x0000d600,
-	0x0000e680, 0x0000f700, 0x00010780, 0x00011800, 0x00012880, 0x00013900,
-	0x00014980, 0x00015a00, 0x00016a80, 0x00017b00, 0x00018b80, 0x00019c00,
-	0x0001ac80, 0x0001bd00, 0x0001cd80, 0x0001de00, 0x0001ee80, 0x0001ff00,
-	0x10000000, 0x000028ad, 0x00000000, 0x00010001, 0x00350804, 0xccccccc5,
-	0xffffffff, 0xffffffff, 0x7058103c, 0x00000000, 0xcccc0201, 0xcccccccc,
-	0xcccc0201, 0xcccccccc, 0xcccc0201, 0xcccccccc, 0xcccc0201, 0xcccccccc,
-	0xcccc0201, 0xcccccccc, 0xcccc0201, 0xcccccccc, 0xcccc0201, 0xcccccccc,
-	0xcccc0201, 0xcccccccc, 0x00000000, 0xffffffff, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x00000000, 0x00007ff8, 0x00000000, 0x00003500, 0x000e0232, 0x011600d6,
-	0x00100000, 0x00000000, 0x00720236, 0x012300f3, 0x00100000, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000,
-	0x0000ffff, 0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x30efffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd,
-	0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3,
-	0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd,
-	0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0010cf3c, 0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x302fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd,
-	0xfffffff3, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd,
-	0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3,
-	0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd,
-	0xfffffff7, 0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x31efffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd,
-	0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff,
-	0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd,
-	0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x056fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd,
-	0xfffffff5, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd,
-	0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3,
-	0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd,
-	0xffffff8a, 0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3,
-	0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x310fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd,
-	0xfffffff3, 0x316fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x302fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd,
-	0xfffffff6, 0x30bfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf314, 0xf3cf3cf3,
-	0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd,
-	0xfffffff7, 0x31cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3,
-	0x0020cf3c, 0xcdcdcdcd, 0xfffffff0, 0x307fffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0002cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0010cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0000cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0004cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff,
-	0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd,
-	0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3,
-	0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3,
-	0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000, 0x00070100,
-	0x00028170, 0x000b8198, 0x00020250, 0x00010270, 0x000f0280, 0x00010370,
-	0x00080000, 0x00080080, 0x00028100, 0x000b8128, 0x000201e0, 0x00010200,
-	0x00070210, 0x00020280, 0x000f0000, 0x000800f0, 0x00028170, 0x000b8198,
-	0x00020250, 0x00010270, 0x000b8280, 0x00080338, 0x00100000, 0x00080100,
-	0x00028180, 0x000b81a8, 0x00020260, 0x00018280, 0x000e8298, 0x00080380,
-	0x000b0000, 0x000100b0, 0x000280c0, 0x000580e8, 0x00020140, 0x00010160,
-	0x000e0170, 0x00038250, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc,
-	0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000,
-	0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x04002000
-};
-
-static const u32 tsem_int_table_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x51fbff00, 0x03f0c0cf, 0x19d9458a, 0x1138fc18,
-	0x5980a1fc, 0xd8181998, 0x88039880, 0x81b8803d, 0x91a18191, 0xdafd7891,
-	0xbf760862, 0x6ec30330, 0x0211e620, 0x1082239a, 0xf354029f, 0x0f5fc806,
-	0x6512b315, 0x3a263860, 0x06a77ef0, 0x298d2ade, 0xc1124536, 0x1e4586de,
-	0x93476f19, 0xca8922ff, 0xff4041df, 0x65296340, 0x229dbe54, 0x04a65e84,
-	0xe4d1a5a1, 0xd7f2a1ed, 0x5192fea1, 0x0dee6ec6, 0xf8003ca8, 0x6065495c,
-	0x00606549
-};
-
-static const u32 tsem_pram_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x7dedff00, 0xd554780b, 0x733ef0b5, 0x49999cce,
-	0x424e4cce, 0x4c22f212, 0x21a08812, 0x8a80af0c, 0x2201277f, 0x282039f5,
-	0x4201d458, 0xd4837908, 0xcdedaf4b, 0x11102484, 0x0547f435, 0x5088768b,
-	0x340da2d1, 0x0ec160d2, 0x6d7b1420, 0xc0faf06f, 0x480bf5ea, 0xb12f3141,
-	0xcbc57e20, 0xe7dad6bf, 0x264ce664, 0xafdbd880, 0xb4fdffff, 0xece7d9b8,
-	0xebdaf7b3, 0x7b5ad7b5, 0x75923ded, 0xc7bf9302, 0x03fc45d8, 0x8c4d4fe5,
-	0xf2c109b1, 0x80f66667, 0xc9b18727, 0x473afebd, 0x6d55633c, 0x9da23b19,
-	0x99ec258c, 0x50281421, 0x2c23d5fe, 0xbfdf8250, 0xf097c365, 0x4219b6ff,
-	0xd0977c3e, 0xc3e611e9, 0x02d5e4fb, 0x933a876b, 0xea0c319c, 0x4b19b98c,
-	0x126b2c64, 0x4b223fa3, 0xe0ff828d, 0x8f392573, 0x27fc34b1, 0x61467574,
-	0xc678c0ae, 0x5c531e32, 0x38a9d0d4, 0x843f7815, 0xbcd2c67f, 0x0731b725,
-	0xbc03cf63, 0xbcf071c9, 0x61de3a5a, 0xc22eefe5, 0x3af3a1df, 0xae58cd6a,
-	0x32773e30, 0x416589a7, 0xf3e33ebf, 0x3d6346ac, 0x4fe3d99b, 0xec3fc346,
-	0x8c517ecc, 0xb1138f30, 0xcb3c018c, 0x632f0e54, 0x5467b2bd, 0x6a9b1f10,
-	0x2c32a258, 0x852f0f58, 0x56338765, 0xed975e03, 0xf8165c16, 0x2f6c39fe,
-	0xbed7e631, 0x15ead66b, 0xa362593e, 0xb50404a1, 0x67eff4e4, 0x11bfcb11,
-	0x2b30fef1, 0xea4ab2a0, 0xaf805595, 0xfb765aaa, 0x67edfe95, 0x54e88933,
-	0x5bf6b929, 0x5adefc61, 0xf1866ae6, 0x02d59997, 0x91fb2fac, 0x7a83e5d3,
-	0x21476366, 0x36d0fa83, 0xc1198981, 0x9e00afef, 0x007f91db, 0xa52b2a1e,
-	0x740642de, 0xb02bddec, 0x871c0ce6, 0x776cbbf7, 0x0c65f306, 0x6658e70c,
-	0x32e73826, 0x74893a41, 0xd2073071, 0xf324bcc1, 0xcea84289, 0xb0f3dc54,
-	0x9de29f7f, 0xe7f4ed87, 0x38e60b49, 0xf25700bd, 0x57a06650, 0x9d3ab5b1,
-	0xea563265, 0xbe442969, 0x8decb538, 0x9e025855, 0xf7c02413, 0x08a78b7c,
-	0x5798a9fb, 0xa780cd9d, 0x8d1859e6, 0xff2db43f, 0x0cf80933, 0xc4c5f3ba,
-	0x76313f21, 0xf04f843c, 0x5a11f1cf, 0xde981c5d, 0xb08b2b97, 0x05f1091f,
-	0x1f011772, 0x26a0423f, 0x544d28e0, 0x29fc573a, 0xd0a0d86b, 0xc3595bfa,
-	0xe50069c6, 0x3f0cbc11, 0x0843ac61, 0x1cbd4be5, 0xb0ff3bba, 0x3c303b94,
-	0x04f3d3ff, 0xab7e1274, 0x1fc8b700, 0xbfd97615, 0xca61f812, 0xf7c0e6ab,
-	0x362a3f80, 0xd40b7e0b, 0xe8dbaf4d, 0x5e26f77d, 0x3765d80f, 0x16d74ff2,
-	0xbdf00ba8, 0x1bf1fda5, 0x155ebf91, 0x3b763359, 0xfa84ca22, 0x3b06a4e5,
-	0xc0750f1b, 0x578db147, 0xbbef362b, 0x692fbf1f, 0xf41b30b3, 0xf17bb157,
-	0x7d42371d, 0xc33361f1, 0x6b5b1526, 0x2fa814e5, 0x582d0bf1, 0xf0e029ef,
-	0xfe8976f9, 0xc7bed0ad, 0x1b389ed1, 0xc6ba73e8, 0x63329cca, 0xc4f6f675,
-	0xa567c059, 0xf8851dfe, 0xc176e95d, 0xf29f6885, 0xc943d6ea, 0xb917af38,
-	0x8b6d977c, 0x7f1d4e66, 0xab64f7f0, 0xbc1ef818, 0x64f3065f, 0xd662efd0,
-	0xb07a8854, 0xd93aeb62, 0xebe20f69, 0xe34a8d74, 0x8bdfc9f4, 0x577c0e30,
-	0xc2e08af9, 0x989a5629, 0x7bb0e517, 0xf3ce6db7, 0x56afce0a, 0xbce3b6ce,
-	0x6ed8cb56, 0x2efe7fb1, 0xfea5cd54, 0xbc2172cd, 0x59b4dd2f, 0xdb910e2e,
-	0x8c836db2, 0x1ac86d70, 0xd7208dec, 0xd7807841, 0x52f583b2, 0x0fa803d4,
-	0x233cbf25, 0x852acf84, 0xb2cbe258, 0x1a73226d, 0xddd388f8, 0x13fc2ef7,
-	0x6bdbe5f0, 0x74eabc27, 0x1aa7d3eb, 0x1aa8cedd, 0xbcdea51d, 0xf8f81119,
-	0xc003a471, 0x827884d3, 0x9f06ad72, 0x97cb3263, 0x9b877fa0, 0x3cbb02a9,
-	0xd999365f, 0xf563067c, 0xd2dd07b0, 0xd99750f5, 0xf582e652, 0x7bb1fa50,
-	0x0493d42a, 0x9f3867ef, 0xc25bc17a, 0x2496abd7, 0x9579e00f, 0xfce0e6c0,
-	0x30d0218f, 0xc0c955af, 0xa6f7809f, 0x8bcf7969, 0x3c7b0682, 0xb17f8bd6,
-	0x39fa8326, 0xa198fd43, 0xf7cbac9f, 0x324e16a3, 0x9616a3f4, 0x8dfcfde8,
-	0x595db1fa, 0x37854d3f, 0x2c29e118, 0x0491fbd5, 0xbf6f5768, 0x37a979b2,
-	0x73c2364f, 0x13f53973, 0xbcc5d53b, 0x1ae7ae0a, 0xb776b03f, 0xed95ef08,
-	0xb0d763b1, 0x5028be50, 0x0edb8005, 0x17ca1252, 0x0ca29331, 0x8eeb187c,
-	0x27a1d433, 0x4175e4f5, 0x958813fd, 0x45397c69, 0x9f90bd26, 0x43faa562,
-	0x85e90a29, 0x5ef06e87, 0x8e20eb83, 0x2ea192cd, 0x11ab477b, 0x14e01af8,
-	0x60961258, 0x7ff52417, 0xf1ccdabf, 0x217a9050, 0x5f7c18fb, 0x8ecdea65,
-	0xa635fa85, 0x6f116bfc, 0xe5eb812e, 0x63559128, 0x230b28bb, 0x233ab4fd,
-	0x085f79ef, 0x00871a9e, 0xbf6085fd, 0x126f668d, 0xdaf8d7f2, 0xc0127c67,
-	0xcc086ab7, 0x12ba0527, 0x60f8099e, 0xa43d5a3d, 0x69f10938, 0x43be4191,
-	0xfc6197c7, 0x06ff1a1c, 0xc71ba3c4, 0xbe3fe84f, 0x61927325, 0x897a6b7c,
-	0x0cab7c61, 0x4fbf03e3, 0xc6d66dad, 0xc0ddfc07, 0x99a134d8, 0x97a4b7c6,
-	0x65abf8d0, 0x3f186256, 0x5bfc6faa, 0x819efe70, 0x83799fe6, 0xa5e9fe71,
-	0x7ccbf9c6, 0x5f6ab3fe, 0xa28fc6d2, 0x5e16cff9, 0x2f4ff3e2, 0xf0b7f3e5,
-	0x77c6fb7e, 0x5effe1f4, 0x8077bf9c, 0x93592df1, 0x5a1ff38d, 0x85bf9c6e,
-	0xbb545f8f, 0xa15f1b53, 0x3b0917f1, 0x9687fcf9, 0xc5b2f8d3, 0x923e42eb,
-	0xfdaaa353, 0x81a44f68, 0x1d260c40, 0x0472a6e5, 0x1fa00518, 0x04990a86,
-	0x9c5143c7, 0x0145ceef, 0x7d4129bf, 0x5120fcc7, 0x352acfa0, 0x9edb2f9e,
-	0xa59ea32f, 0x376889f7, 0x6d453ff1, 0x6c37ad22, 0x1c3fc5bd, 0x136eede0,
-	0x5a2f587d, 0xa45f937f, 0xe5db8ef5, 0xf005c660, 0x1c9e5ff9, 0xaf3a1cd5,
-	0x935172f0, 0x418764f9, 0xbe3c388e, 0x1aa23602, 0x26476be0, 0x9fac1098,
-	0xc60a3d04, 0x7a0e3b2f, 0x6653cb14, 0x009c8f6e, 0x50e4cb3d, 0xf6e5a9b9,
-	0x93bd8f88, 0x5bbaf303, 0xc4a4ff83, 0xb9727df1, 0x9ffc47e0, 0x4654b75b,
-	0x09a8b4fd, 0x7910e98c, 0xd4e8d2af, 0x6fe2dbbb, 0x4e9f0816, 0x243dcfc4,
-	0x97fd8c8a, 0xde2fd766, 0xddf0c830, 0x486fe63c, 0xd70bf682, 0xc2a21fce,
-	0xc7307ffc, 0x53ed1632, 0x13548490, 0x354b31c9, 0xa7316f81, 0x15399d75,
-	0x31ccf72a, 0xb9faec1b, 0x07fd635e, 0xb77ac625, 0xa1366fd9, 0x6044b1bd,
-	0xfbdfa19b, 0xf5ef8daa, 0x71093671, 0x78daae9c, 0x78722777, 0x2c72c3ef,
-	0xae89563e, 0x5bfcabf7, 0x87aa9e1d, 0xeb402ccd, 0x43024765, 0xc812fa3a,
-	0x7caaf35e, 0xdef0e1de, 0x3dbab66f, 0x3ffdcf00, 0xe19f0912, 0x1ebc77f0,
-	0x1d8136ed, 0x4be1b1d7, 0xe1b7da33, 0xff8709f3, 0xf3e11581, 0xf7d46551,
-	0xcfe17df3, 0xf3849f39, 0xfe5b5553, 0xed2113a0, 0x3fbe5a2a, 0x7f0844e8,
-	0x619b6d95, 0xcff12fa8, 0xbc5fb435, 0xfde1be61, 0x8625a6a2, 0x971b0bf7,
-	0x7df3ea1a, 0x7fb4323f, 0xe1ad4560, 0x8fd57dfd, 0xa0ffde18, 0x3ea19d64,
-	0xd0d1bbd7, 0x9b399efe, 0xaf4def0d, 0xe513bc8f, 0x915deea8, 0x5671bae1,
-	0xda38f939, 0xc9156783, 0xb4f8f485, 0xe0e48926, 0xca938d74, 0x5671b6ee,
-	0xc583d72f, 0x5e9c4c0c, 0x71af9ce1, 0x4665ea32, 0xc2aff3fa, 0xea0f9f05,
-	0x849c137f, 0xcc83713f, 0x02c2c002, 0xe3e3eb8b, 0x7de4315e, 0x6fde65c7,
-	0xd71f4100, 0x11d8bdff, 0xf35579f9, 0x046aa1fc, 0xb72821ff, 0xb9d7152c,
-	0x0f7d6d1e, 0x302e5f7f, 0xc673e84f, 0xd79c9256, 0xb94ceb69, 0xf941f5cc,
-	0xf402e4ce, 0x40e5cbbf, 0xc6a5f576, 0xa2a4016b, 0x3ceb449e, 0xa401f901,
-	0x592fc0c0, 0xdceef906, 0x955c1227, 0xaf4013a8, 0xc19e63ae, 0x8133d426,
-	0x8d77e903, 0x49dc3842, 0xa04b6f54, 0x66b3bd75, 0x1213a0fa, 0xe543c7d2,
-	0xa87335a7, 0xa5e3593c, 0x094d44f2, 0xaa6bc795, 0x59a8eca9, 0x35c7e541,
-	0xaa3f2a3e, 0xcff2a469, 0x1e544d35, 0xe540d9ad, 0x2a7e357b, 0x54dc6bbb,
-	0xba2bf9f6, 0xecd78dfe, 0x80afcd55, 0x67ea8795, 0x43d4b9b4, 0x739276db,
-	0xf9ca1257, 0x365ce519, 0x8e67e3da, 0x31996382, 0xf9c2be30, 0xba3a606d,
-	0xf6295ec9, 0xf5c7fd03, 0xe28b6f7f, 0xd899b274, 0xd9a67074, 0xe17fc323,
-	0x7543905a, 0x16065909, 0x7b0cd724, 0xed617e84, 0x8e5d7a43, 0x9bddcc4e,
-	0x71e8133b, 0xe5bf99f2, 0xda75bf61, 0x407517fa, 0x059875a4, 0xbd21779e,
-	0xeb46f042, 0x9aabef5a, 0xfe0cbfbe, 0xd7f0faba, 0xfbfe8e9e, 0xfea54141,
-	0x985ab4cf, 0x13dc7884, 0x67e607ed, 0xef3f0e67, 0x965c7940, 0x444f5264,
-	0x565e83c0, 0x4aa864b4, 0x66d3fae8, 0x12699fac, 0x7ad0b7a6, 0x35998cec,
-	0x554af90a, 0xfa430c4f, 0xf7a95127, 0x56492cb3, 0x9ebc804f, 0xc31596de,
-	0x5f3f6fd7, 0x12c7b707, 0x485f82bf, 0xf0deffed, 0x0e8fd40c, 0xecad630f,
-	0x03ea2b13, 0xedf59778, 0xfd2672fd, 0x6c57e295, 0xda1cf98f, 0x7bf8160b,
-	0x1207e291, 0xab7ef5d5, 0x659f445a, 0x6edf3e34, 0x73be0f18, 0xc5f73eea,
-	0xadf14bcc, 0xc4864ec4, 0xf169d611, 0x366db2c6, 0xc4aeb8d5, 0x6d55ea1a,
-	0x9d61aac9, 0xfc807fc1, 0x42416ab3, 0xb8d729be, 0x1a5247a8, 0xdcaf8005,
-	0xab7ea4e4, 0xc2aede04, 0xe17b21da, 0xa72b5751, 0x9df040db, 0x94ec39ae,
-	0xac4bde40, 0x7c0201e0, 0xa7232d25, 0x6aeb9ea2, 0x7b444bad, 0xf33c4cb0,
-	0xf7c22790, 0x8d024d3b, 0xee6fc4b7, 0x1aa3ae35, 0x57e8307f, 0x167e4e7f,
-	0xd4864e53, 0xcedc4d3b, 0x80f7ef0e, 0xf0e5efd6, 0x48fdb953, 0xfece8de1,
-	0xfb6caa78, 0x1c92f642, 0x82f2ffc1, 0x57f1d278, 0x401cf26e, 0xedba5a7d,
-	0x9fa3d918, 0x0fd97d9a, 0xf53f425f, 0x44929f9f, 0x5e7d5271, 0x6129303e,
-	0x7c5a059c, 0x9ef7f817, 0xfd3d610f, 0x6ccddfec, 0x2ec7c00d, 0x6f782b40,
-	0x13335fd6, 0xa17d4133, 0x5ad05b56, 0xcfdd7146, 0x2a8edc4c, 0xd1071e62,
-	0xa1e53581, 0x4cc5d91d, 0x5d4f11d3, 0xb8c76dec, 0x329c3a10, 0x1667a4c9,
-	0x18ed1a36, 0xf50d7fb0, 0xf58c1bc5, 0x11333662, 0x7af149f5, 0x340bf333,
-	0xf7fbc33f, 0x7fe12a4d, 0x855eab31, 0xf9a4aaeb, 0x26540b23, 0x157c02a5,
-	0x6f3679bf, 0x4c5fc63e, 0xe3d10fdc, 0x38e24b23, 0x7ef1a5fc, 0x3fef0dd9,
-	0xf7771d69, 0x8b06488d, 0x89c6157f, 0x6d730c58, 0xfbf1fd65, 0x870fe16d,
-	0xfbaf5f57, 0x383469c5, 0xdb826dc4, 0x2f7f811f, 0xeba67c68, 0xd5445beb,
-	0x8ddc17e0, 0x21bf10f5, 0xb2e2d446, 0xee911322, 0x67d5aa5d, 0x14f7a18a,
-	0xb4edf7b7, 0xde80eab8, 0x0679373f, 0x4ec81389, 0xed2165c8, 0xd2f26e7e,
-	0xade14ef3, 0x995bb462, 0x3b45c814, 0xe218d614, 0x07e35953, 0x8b91ca31,
-	0x833b66f1, 0x6fe81475, 0x9fa0f841, 0xdb92f655, 0xbbc62e58, 0xbfa1de41,
-	0x87851cc7, 0x94dba805, 0x59fd8656, 0x7cf18c92, 0xaf58d39b, 0x1d207fc2,
-	0x3f8a3046, 0xc2908f45, 0xa86018f0, 0xe32eed0f, 0x84e851f3, 0x201fdd91,
-	0x8b10763e, 0x02556943, 0x26cf8c22, 0xfe7d9d49, 0x7bfa2656, 0x2f8a7e1c,
-	0x2ae5fb40, 0xc5a95f6f, 0x507f97cf, 0x12ee3830, 0x3ceaa8fa, 0x21419068,
-	0x7fbe3d75, 0x71fe625e, 0x3a6f41df, 0xd10d5561, 0xde4d739b, 0xd40f4869,
-	0x009f0893, 0x760d78e3, 0x2a1a9a60, 0xf8c20be7, 0x88e1aae3, 0x5dfd0667,
-	0x2ddef26e, 0xe387f426, 0xea4ffbaa, 0x4882ffd7, 0xfeeabcf3, 0xbfebf587,
-	0x15ff5232, 0x977979bf, 0xf4a9f80f, 0x803a4f57, 0x5267d999, 0xe80ba253,
-	0xc1b5be5e, 0xa9f97281, 0x5d2073e4, 0xd38bf33f, 0x16e7c923, 0xb74f9751,
-	0xff11e422, 0x7e9d1f10, 0xd03bd1e9, 0xd5b73aae, 0x607c52ac, 0x0160259b,
-	0x5d6caca6, 0x9b63e5c2, 0xafaf18e5, 0xb3f902fe, 0x2fa8cdaa, 0x32785f4a,
-	0x40cde311, 0x0e7fcd49, 0xb9507f90, 0x68852fe5, 0x5eb15577, 0xdfe17bd2,
-	0xe3e7f8e1, 0x2f981ec8, 0xaf7ff4c7, 0x6955f3ef, 0x7d6aa978, 0x84910bf4,
-	0xcdfc83a5, 0x9a25f6f0, 0x68a4ffbd, 0xdf38a78f, 0xf9113644, 0xf307c74c,
-	0xeebf7b73, 0x8f73a7c5, 0x5b9d3c01, 0xe421ddfe, 0xd727f284, 0x165a677b,
-	0xe735fcfe, 0x0dd4f2c0, 0xaed4317a, 0x6767d7d6, 0xeca7e69b, 0x39b965e1,
-	0xb03f40e0, 0xe5d9b37c, 0xfcbeba43, 0xc19e2ffc, 0x1607ccb8, 0xbfe870d7,
-	0xef83e5ec, 0xb2f500dd, 0xdbf8e61d, 0x211434f8, 0x2a974831, 0x6c62bbf8,
-	0xbfa50e90, 0x473b283e, 0x8e3fe7f1, 0x6ca3d20b, 0x8d993ec7, 0x298f8fea,
-	0x0ee4fb2d, 0x5a5d0225, 0x3fa2158e, 0x57e2f751, 0xcfafea32, 0xe0d8175e,
-	0xdcf8088c, 0x62ec907c, 0x51d113c4, 0xdd1f53a3, 0x0157dac2, 0xeabf505d,
-	0xff7f0a74, 0xc7fe9a2f, 0xc4399cfe, 0x86bcafcf, 0xb67f28fb, 0x25fe70b8,
-	0xc0e83caf, 0xaa929c79, 0xdb3f5f39, 0x7186e890, 0x44becc4b, 0xbcfe4a95,
-	0x121fb9e4, 0xf23e2dbf, 0x7f8a44c3, 0x89b27730, 0x325f056c, 0xa6d16fce,
-	0x62bf34d9, 0x2bbe25e6, 0xe0f45679, 0x8959e0fe, 0x4111df4d, 0xae24522e,
-	0x5b354f8f, 0xa7654d70, 0x7dc0e170, 0xff45b785, 0x2dff8a56, 0x0fcaf8a5,
-	0xb620fdf5, 0xad67ea8c, 0x885f4e9c, 0xac1abefa, 0xbafca13c, 0xd23b7565,
-	0xf710f4e7, 0x571b8c60, 0xe1a7c931, 0xfd08b843, 0x0da6478a, 0x4e61f4e6,
-	0x0efb4f29, 0x7c14fdf4, 0xcddbed8e, 0xe1ae5b6e, 0x2331763b, 0x6d72fe38,
-	0x0a3b807c, 0x8953d5ed, 0x9845ff60, 0xafa4a15f, 0x85576037, 0x7c8857f0,
-	0xf2df7973, 0x5d6f9708, 0xa633fdde, 0xbebffbe3, 0xbf07e5c3, 0xe0057b43,
-	0xf7a60c0a, 0xa40966fb, 0x102c2c0f, 0x98b7ae49, 0xbe36b935, 0xe004f9d7,
-	0xeddd7096, 0x3fec17e3, 0x764ff08e, 0xf87af16c, 0x565f442e, 0xfe8e78e1,
-	0xbb72e9fd, 0x04ff9358, 0x6cff28c9, 0x81fb9713, 0x8f1f09fd, 0xbffd984b,
-	0x15e50678, 0xaff713e4, 0x7b365fcb, 0x6f9fde70, 0xbddef03f, 0xb79fa720,
-	0xd46a72e8, 0x5a72e19f, 0x8b0273b2, 0x639fa724, 0x3924421a, 0xe511e785,
-	0x3e20e954, 0x4fe947fe, 0x85377f1d, 0x87d74fe1, 0x5c31e103, 0x7459fe1f,
-	0xf087d446, 0xd7961de7, 0xbe74ff9f, 0xf4adf9d3, 0x29431597, 0xa5f3a63e,
-	0x7c7d77ce, 0xbf5df3a9, 0x7f01a378, 0x182defe1, 0x3cb80183, 0x4714cdbb,
-	0xf7c3df28, 0x43bbe17f, 0x4f09e3a9, 0x58c65a6e, 0xf8d4a1d3, 0xac3fbad0,
-	0xded612de, 0x84f7561d, 0xd586f7b5, 0xcbed0dab, 0x3cc80edb, 0x686025af,
-	0x8678ae27, 0x1228327d, 0x5fb9fabf, 0xec85fada, 0x7a50be43, 0x4af37be9,
-	0x3c63b3e6, 0xf148af7c, 0xf1c01e91, 0x67a7182a, 0xf31f867b, 0x3c6c1a24,
-	0xf6a3d4ee, 0x6c5ed03a, 0xdef5e588, 0xea157904, 0xaf79fd3d, 0x7af5c78d,
-	0xd88ebd3c, 0xd8edfb10, 0x76f4911e, 0x8f4d9f87, 0x8ac267e4, 0xc1d47242,
-	0xe3cf7a06, 0x2544d3fd, 0x5fc6057d, 0x8617449a, 0xef6a8a74, 0x419e6071,
-	0x3bac9ecf, 0x45f3c0e7, 0x8db48a6f, 0x7b7683d8, 0x2dc7920c, 0x77f88725,
-	0x53df329f, 0xbf7e3193, 0x4579fb87, 0x11ecc36b, 0xa9f896b6, 0xa32e5958,
-	0xecbf053e, 0x82ff71b8, 0xd6a945cb, 0xe326c95f, 0xdc7bfd7b, 0xbdfb45c1,
-	0xbdf18b74, 0x34078b57, 0x863272eb, 0x71fcd18d, 0xf4d28f1e, 0xe73134f2,
-	0x8f4039ce, 0xc322c39e, 0x7b33fbfd, 0x99c7a244, 0x9ebf7ced, 0x23d7f6e2,
-	0x3e92f77f, 0x89d4f1d4, 0xac0f24f2, 0xfd5f3aaf, 0x9187bcaf, 0x987d766f,
-	0x3b2833fb, 0xfd907d77, 0xe6ffac5b, 0x590ff4fd, 0x5e53f6ff, 0x493ed1b7,
-	0xe276ebcf, 0x7fbd9ef7, 0xeb187f4c, 0x9f142dbb, 0xabfd79ee, 0x9e9fe45c,
-	0xd4129695, 0x80433d77, 0xec1f68fe, 0x83b72afd, 0xa27ad7d6, 0x99251fdb,
-	0xfe7b47db, 0x8f10b1f6, 0xed0acc25, 0x49a3d786, 0xb35eaa9e, 0x67ad3c51,
-	0xa17957ef, 0x9d77ff76, 0x7fb6a54f, 0x736763d9, 0xb17c2276, 0xeaa7df7c,
-	0x5f3fd7b7, 0xad17f98b, 0xf085e4fb, 0xbeefca7e, 0xda3d45c9, 0x43db93b3,
-	0xe78ee6dd, 0x68ee7f70, 0x6695dcfd, 0x0a3773c0, 0x9bac0a55, 0xa014cf0d,
-	0xcbc7f4dc, 0xbc271437, 0xfcf47c52, 0xc10f835f, 0xdd9df5cd, 0xde70156f,
-	0x21fc7f5f, 0x2dd785ea, 0x7cfa97c4, 0x25a96f3f, 0xf372e57b, 0x9c799876,
-	0x799dffe4, 0x992b810b, 0x3ff328f7, 0x2d7fbd37, 0xe12e8939, 0xcf9fd072,
-	0xf5443ef7, 0x822eed97, 0xfdf90af7, 0xf9f27ff6, 0xefba6b7f, 0x2e3bba04,
-	0x7ff2ef3f, 0x4c0f79f2, 0xd7ef37f7, 0x7e62aee8, 0xbeefd54b, 0xadbef821,
-	0x4ffb5b9e, 0xcd03ef2e, 0xd7ebb75f, 0x994d5c98, 0xaf439f18, 0xc569d601,
-	0xc311b33e, 0xcc466b85, 0x14ced154, 0xf52bf6c3, 0xfb99af72, 0x5bee224d,
-	0x086f9c62, 0xcd31f38f, 0x3d2da28f, 0x8a525a18, 0x94958ec9, 0x96bedc55,
-	0xc06eed5c, 0x176b9acb, 0x887728b8, 0xc5ea3d8d, 0x1764da7a, 0xfcc3afc5,
-	0xb9817ac9, 0xa56fb005, 0x8c396f6b, 0x84798dfe, 0xa5c96029, 0xab9618f2,
-	0x59a4b8b5, 0x8f7e0d95, 0xdbac6392, 0x45bac69c, 0x38cacfeb, 0xe624d6fc,
-	0x38b4f8c7, 0x798abf72, 0x8918e26d, 0xb1b75009, 0x17fa1f26, 0xf7e32496,
-	0x1ec0311b, 0x5abdcf12, 0xe1f6f63c, 0x1bbb6c71, 0x44d238f1, 0x2e4a6b71,
-	0xfcb8bc25, 0x8d9e786b, 0x55d788d5, 0x094f88ed, 0x7f6e5ffd, 0x34ccdf91,
-	0xbad2597f, 0xdc984690, 0xcd3b6336, 0x9d2cbe4f, 0xcbd25d38, 0x332d3a35,
-	0x43a745d0, 0xe818fa04, 0xdbf9e3a2, 0x2e9c27d2, 0x6fdff8e1, 0x07fe1276,
-	0x974e97a2, 0x50cdc534, 0xbf9acd5e, 0x49fd1530, 0x1879a7ac, 0xfe6b33ed,
-	0x66ef1482, 0xea93a43e, 0xf42f4862, 0xb7e002db, 0xf3fb7efd, 0x7aea2714,
-	0x081dd8e9, 0x456fd94f, 0x75fc0566, 0x00b3b76f, 0x65f92f7e, 0x5b4b43f4,
-	0x33fb8a45, 0x57779029, 0x6eafbec8, 0xcafd97f7, 0xdd29f34e, 0x06dff169,
-	0xfaee97df, 0xb0ec9724, 0xd7e4bd95, 0x38125ef8, 0xb91d7ddd, 0x2a5bafb8,
-	0x9c23ff71, 0x9e65625f, 0x3bb9d027, 0x6dc60e7a, 0xdf3c6d84, 0x1ee5b4b6,
-	0x7f90c5b3, 0x91dbd666, 0x28bdf05e, 0xc213be50, 0xa9e79a17, 0x2f9d1dfb,
-	0x36be1c0a, 0x76f31fb3, 0xe8edb74b, 0xe953f8c6, 0xc30b8b51, 0xbedb55d2,
-	0x298dfda0, 0xd1d97abf, 0x68b6fe41, 0xf3f43f88, 0xc489b7fb, 0x15ad951f,
-	0x9d4087e4, 0x25b2a2f8, 0x72ebfc72, 0xafd969fe, 0x01f2eef6, 0xfd7ecb0a,
-	0x5be30382, 0x3ab7dba7, 0x76dfffc8, 0x3f5bb8e9, 0x91e5bf3f, 0xa7f9fa4b,
-	0xbfe01ff1, 0xc58720dc, 0x220db649, 0xcbe0047f, 0xadef948b, 0xcbd95bf3,
-	0x38c39f67, 0xcfcee774, 0xcb78439f, 0xe7cbfbff, 0xaf609fd0, 0x88add4db,
-	0xa5de9797, 0xddfe9e38, 0x9dc7992c, 0x817c5fbb, 0x1fdd9fe2, 0x7f01df80,
-	0x4a9ef7ba, 0x7bb27f47, 0x1889d7c7, 0x77be592f, 0xef9c60da, 0x0ca757f2,
-	0x88f41166, 0xfadf225e, 0x1afe20af, 0xad03af4e, 0xe9efc807, 0xdfa37a02,
-	0x69b717d9, 0x3071e0a9, 0xd9af16a7, 0xddce391e, 0x7ad33e2f, 0x8d379dd7,
-	0x72ecd2c7, 0xd3882bb2, 0x1c7403bc, 0xdbf4057d, 0x7fe688fe, 0x175fa646,
-	0xb4e803fe, 0x677e8c2c, 0xfcfd175b, 0x3ad77c19, 0x4d38c068, 0xa6f00ae0,
-	0x27bfd1c7, 0xa3227fbb, 0x25fced7c, 0x6e90c5c5, 0xbb44c1b7, 0x8e9b3e5f,
-	0x9a9f0ffb, 0xe7e7ef7b, 0xc62a2c32, 0xbef74a1b, 0xfdd3f24f, 0x538a11ea,
-	0xdd9e2d33, 0xf0fefacd, 0x5396a3f8, 0xcec5b559, 0xfe1a3be3, 0x74e3fe31,
-	0xce2d73d0, 0x8f58f9c3, 0xf7140cff, 0xde799569, 0xafdf1e88, 0x16a1f2d8,
-	0x4bd2094f, 0x3a748498, 0x08fdc976, 0xe22a0f1d, 0x1c686261, 0xad7c7233,
-	0xd1adde2f, 0xf187e90b, 0x2538becb, 0x6e30d3d4, 0x67de17e5, 0xf741f411,
-	0xecff1e66, 0xa3ce4736, 0xbf9ae3d2, 0xff53970a, 0x2f33c595, 0xc5b7ff07,
-	0x52765f8f, 0xea78e1bf, 0x8f5910bc, 0x75f32dbf, 0xc5f7aaff, 0xbe4305ca,
-	0x7bc9b941, 0xa2b1f904, 0xcfcc98f5, 0x52f3f0a5, 0xb53b7cfa, 0x97ced1bc,
-	0xad778a44, 0x7a40396a, 0xe85f5c3c, 0xf0e1a6fb, 0xade0d09e, 0x44ebe36c,
-	0x5fbb4ee7, 0xf73a7e81, 0xae7e26ef, 0xe28c7edc, 0xfdb6876d, 0x5908ee5a,
-	0xf09d7157, 0xf9dfc087, 0x1e5cbeca, 0xec79e5b7, 0xd19ce3e1, 0x9ed561f4,
-	0x6d54e3c8, 0x4e30c2ff, 0xe645af99, 0xc7a5fdeb, 0xefb92d3b, 0xb74efec1,
-	0x79e6199b, 0xa7116e9e, 0xf5173a47, 0xea6eb6ae, 0xbd707ee7, 0x23fd7ca4,
-	0xf8cc5cfc, 0x1f28a3b7, 0xe991f97e, 0x63c4c61f, 0xfe878409, 0x9f396b5a,
-	0x9dc4feb6, 0x3d6ef48a, 0xeb88af72, 0x6fc42ed4, 0xf79f9d88, 0x3b14f54e,
-	0x8fbc85e8, 0x5d91e33c, 0xc4cdf5c3, 0xfc0326a3, 0x5c60ce30, 0x1fa1ea07,
-	0xf982a73c, 0xe88f086e, 0xf08e9c28, 0xb549aa88, 0x61e7fd09, 0x5e743c56,
-	0xacd7ef40, 0xb003cf1a, 0xd89ce30b, 0x1e4cd24f, 0x8bbe4c47, 0x3cfd3e97,
-	0xbf94714e, 0xa059e60e, 0xf02cd378, 0x7d7d927d, 0xe78641c6, 0xde5126bf,
-	0x78c59676, 0x554bac6e, 0xdfd0267c, 0x596ce4cf, 0xf949d937, 0x4258d707,
-	0x20580ff3, 0x6f51f917, 0x587defd7, 0x7e1a427e, 0x1a88fd02, 0x7e5a597c,
-	0x21d610c2, 0xc9bd7da0, 0x0e27cfce, 0xf84de255, 0xbd9af3fd, 0xec3f9fa9,
-	0xec315e77, 0xcee5e29c, 0xc94fc627, 0x05d43a5f, 0xcf7ab4fc, 0x8f5fcc14,
-	0x477f27bf, 0x12798aaa, 0xe7829e7f, 0xc85fe257, 0xf50c931f, 0x9c1fab13,
-	0xc8fff54a, 0xf50e931f, 0x8dff1a6f, 0xca04cbd7, 0x3d582d57, 0xebf22a7a,
-	0x2cf9cb55, 0xce5188c0, 0x75bc40ef, 0x7bba3e79, 0x1ff31391, 0x5f8e657a,
-	0x4376c1e6, 0xa5bc7126, 0x40ed1f29, 0x75350d3c, 0xfe7f22d4, 0xb157ef7c,
-	0x4c9c17a8, 0xaca8fc25, 0xc1fa455e, 0x2f1749a3, 0x9e174791, 0x93eba64f,
-	0x01f78acd, 0xf991e384, 0xe05ce823, 0xad332533, 0x98cf5f3c, 0x78d4c0c7,
-	0x469167a2, 0x1ad3844f, 0x58bf8f92, 0x5cfcc9f4, 0xafa6934c, 0x9e38aaa6,
-	0x2f172be0, 0xe1edf75e, 0x4be7507a, 0xc8695ced, 0x1087c679, 0x7de29f5e,
-	0xffd092c8, 0x161de33c, 0x9f7c0acf, 0x1d3e7c5c, 0x9f3f5bf9, 0x91ce7e18,
-	0x48a6bd49, 0x76b35ff6, 0x782071ce, 0x2aef563d, 0x77f3371c, 0x41879dce,
-	0xc91746be, 0x1ccd4c2e, 0x827c62bd, 0x5215cfc4, 0x4695439e, 0x971324bf,
-	0xa310f643, 0x8b1ed67d, 0xb9bf46e0, 0xf49541e7, 0x6dd15a77, 0x44f557e4,
-	0x3e60b467, 0xfcc3cf50, 0x4c66295c, 0xd90d1ca3, 0xbf401313, 0x5ce0e40f,
-	0x339c1c98, 0x71c673ae, 0xdb3a2e7b, 0x553fa83a, 0xb00c0feb, 0xe0b9e0c4,
-	0xe5eb911e, 0xc1271a9e, 0xf6f98431, 0xa57efae1, 0x18b56de3, 0xde02fdcf,
-	0xe8bc405f, 0xc0e5ff78, 0xa3457bf4, 0xe8912bdf, 0x74fe7e17, 0x6bfbc5be,
-	0xf8aa7f6c, 0x15742ad0, 0x869dcfc3, 0x6a4ab5d3, 0x78ae88da, 0x682f9ee2,
-	0x36e9d19d, 0x412b857a, 0xe3a0641a, 0xe8efd8eb, 0x10985f3d, 0x4f7e9d5e,
-	0xfdef900f, 0xcf5f0b07, 0x9c4bc7c2, 0x8de291d3, 0x1060feb4, 0xcf58212e,
-	0xf8d1e6b5, 0xde3c4d83, 0x10bdbfd3, 0x7fd03e71, 0x30f2a5e6, 0x2fde5573,
-	0x50fdffe0, 0xf110ffbe, 0xfe22223f, 0x03bc463f, 0xf6c63ffe, 0x4fff8057,
-	0xdd7f852e, 0xf4d32fae, 0x2bee1942, 0xc5fcff01, 0x13313339, 0x15142dc6,
-	0x5b25ffe2, 0xd21f6d45, 0x62725b7d, 0xb92c8f50, 0x199f7abe, 0xb3c970f8,
-	0x9169f102, 0x73fd5e76, 0x784b5ced, 0x1cf15f5e, 0xcbc9e91f, 0x49f9f7e7,
-	0x336d950f, 0xe410bf3e, 0xc7ca74db, 0x93f3f1f5, 0xe11726a2, 0x68a33ff8,
-	0xd628a2fa, 0x0e9c2ed0, 0x864daa43, 0x29e4f03c, 0x9f90fd7d, 0xbe726497,
-	0x3fb5f14f, 0x07c61998, 0xf8fc52dc, 0xbc63e200, 0xcdfb1530, 0xef56e4d7,
-	0xe30ae86f, 0x33e19f3a, 0x6acbfb9e, 0x1bfb9e34, 0x686294de, 0x4c86cd7f,
-	0xfe91fbc3, 0xafef0d6b, 0x50d636db, 0x8372d51f, 0xb6e8fda1, 0x4c7d4302,
-	0xfb4316e0, 0x1a678771, 0xefda13ea, 0x789fb435, 0xfde18174, 0x86a51df5,
-	0xba7e37f7, 0xa9bf50cc, 0xed0d5ff7, 0x5eb88b03, 0x94935fdc, 0x740ae786,
-	0x2a5fecbc, 0xbe7c549b, 0xe6a4db34, 0x744f3e86, 0xccb1733b, 0x357fa373,
-	0xb14cbc90, 0xae85a726, 0x6cccf9cf, 0xac536bd0, 0x55817ac6, 0xe07497e3,
-	0xcdfe2017, 0xa55ca356, 0x026bcf56, 0x2ca59bb3, 0xd2f94619, 0x58b75f20,
-	0xc5bb7eb9, 0xedfa657a, 0xaa7f6c4e, 0xece74032, 0x444be5c3, 0xd2a2caf9,
-	0xcca9fb47, 0x1b96f945, 0x4d3e466d, 0xccaf401a, 0xc3cf1ab3, 0x9b61ea8b,
-	0xfd139064, 0xd0a8f9f9, 0xdbe2c2e7, 0xa0676f28, 0x05a4e57e, 0x7d016eb7,
-	0xa97b2729, 0x9aaf9fd4, 0x97988a63, 0x3bf590f7, 0xfa1b49fa, 0x210f4fd9,
-	0xde92bb7e, 0xccf30a7e, 0x92f5e72a, 0x316c94bf, 0x775825e2, 0x5479e60d,
-	0x508e7e4e, 0x54dcffe5, 0xae2b78d3, 0x173cfaf7, 0x1133307d, 0x06d203f3,
-	0xd55e9ff0, 0x4d5cf1e6, 0xc345adc9, 0x14d53fb0, 0x7a45bf7a, 0xfd10aaa0,
-	0x1e5aa198, 0xc8a653f4, 0xd53f4af9, 0x0a8c19fa, 0x5503ed14, 0xaba0fb21,
-	0x048723f8, 0x9377f8f3, 0x17c8a7f7, 0xe7b7460b, 0x6ecb73f1, 0xabb24cd7,
-	0xd75f8254, 0xe78ae943, 0xe92bd429, 0x66731249, 0xf06787f4, 0x06636f3c,
-	0x338fafbc, 0xf7aa14b9, 0xe59e380a, 0x820d8cc7, 0x5bffeaf1, 0xf7eaf824,
-	0x3cf94f5f, 0xe29aa516, 0x993cfaa7, 0xc7afdfb6, 0xcd26cf8b, 0xd63c418a,
-	0x6e77db5f, 0xacfd6187, 0x7ec76de2, 0xd337aecf, 0x8205f5b8, 0x6f3ebde1,
-	0x741dc369, 0xe15d2b1e, 0x79862ef3, 0x3496dc23, 0x73fd570e, 0xb8234b02,
-	0x43d2f7fe, 0x8aecbfe8, 0x0dbc6176, 0xe889b1f0, 0x6738ceed, 0xf30f27d2,
-	0x34a418aa, 0x25fb21af, 0x96fa1fb2, 0x4cdbaf95, 0xf688959d, 0x4635f254,
-	0x66f5c5b8, 0xc51707f2, 0xe0af942a, 0xd1a159af, 0x55ef38d5, 0x9cef3349,
-	0xbdd4f00b, 0xfd4c3223, 0x2d347671, 0x15df043d, 0xfcbb46b7, 0xef78fece,
-	0x01387272, 0x6e10b7ee, 0xcd214371, 0xdc21da9b, 0x33d8173f, 0xde77c819,
-	0x14ff44e9, 0x977dc313, 0xd3fff870, 0xefc4e3ca, 0x879a5558, 0xeb7c549c,
-	0x16584196, 0xb51ddc91, 0x7fceb80e, 0xfcebe568, 0xeb08d687, 0xfdeee5fc,
-	0x7ed39f28, 0x6dd14b08, 0xeadaecd2, 0x197b50ec, 0xec49d6f4, 0x318baf57,
-	0x7ec5ce3f, 0x3ccbb607, 0x9719d94d, 0x1ed0cbb7, 0xedd3fe43, 0x8d5abfb1,
-	0x9e886476, 0xb3d34afd, 0x9ea15d5f, 0x4eed80bd, 0x68881bdd, 0x91c824c7,
-	0x1b38dcf5, 0x2a957fc7, 0x1be3ca33, 0x6d9f9e20, 0x0e1f6c8b, 0xce5d0eb4,
-	0xd68cc8cf, 0xefd754f9, 0xc560dfdc, 0x9c2fed32, 0x247fe0d9, 0xe329f71b,
-	0xedde5187, 0xaea4fd40, 0xf10d83f8, 0x886de3ab, 0xc04f88cd, 0xf9c6d3a3,
-	0x648b69c4, 0x1e03960f, 0x0e3c064d, 0xd903f6c7, 0xdfad5783, 0x6ee78c4b,
-	0x837c35ba, 0xbc71979e, 0xce3ebbae, 0xe545b8c3, 0xe7a473ec, 0x399c7aaf,
-	0xf74475c6, 0x011c61bf, 0xd77ddfe7, 0xb7716b7f, 0xd5178a0e, 0x0c4d7abd,
-	0x0a2aa7c6, 0x9586f4fa, 0xa49985db, 0x5976bb07, 0x576708dc, 0xece7cf1c,
-	0x10f135da, 0xaf3e39c6, 0x85299c39, 0xaf5d2dd8, 0x4333c91c, 0x8f3b5d7f,
-	0x209449e4, 0xd17e27e7, 0xfc5c57df, 0x128f3ccf, 0xc7d0273c, 0x0ebe566f,
-	0xf8f1b7ad, 0xc798d3c9, 0xf7b19a36, 0xfaf963a3, 0x1c7a6891, 0xe3bf479f,
-	0x7f7ea1f3, 0xc7e57054, 0xdd262b00, 0xab664c55, 0x00a68de5, 0x6e0a8f96,
-	0xbe55e311, 0x4d3cfc91, 0x911b1652, 0x4728fd01, 0x8e0803db, 0x8dd7a3a3,
-	0xa7ea29db, 0x0b2c3eea, 0xc402ef14, 0x2baf5c7b, 0x37fc7d09, 0xa1b38d87,
-	0xe14d215f, 0x7e77b77a, 0x29ef1f94, 0x8fb9344a, 0x6767aa80, 0xc58c2f0e,
-	0xe68b7ff7, 0xd258f2f2, 0x8e5c2689, 0x38a03970, 0x5a669bd4, 0x710d96df,
-	0xef822f27, 0xe7884d97, 0x9805e97e, 0x9639c87d, 0x0967e3c7, 0x00b90714,
-	0x14e78178, 0xb53e02fa, 0x3317cc4b, 0x89b0f416, 0x0bf055b9, 0xee4293ec,
-	0x68ffc1d9, 0x4d60fc76, 0x4d38f6ff, 0x45e0333e, 0xd5db1976, 0x5c0cee09,
-	0xfc81774f, 0xb4fa030d, 0x7ca958d5, 0x184d46ad, 0xa7b8f206, 0xafea8926,
-	0x0ca938d7, 0xe7a08cd4, 0x545c6bfb, 0xa7b5368f, 0x552c7ad3, 0xfe879baf,
-	0x0b12fdf5, 0xbc23b7bd, 0x8e567bc4, 0x97f9c887, 0x0093e62e, 0x3d352fae,
-	0x38d6fb52, 0xc6a7afe2, 0xfd31d400, 0x8ad9ffbf, 0x054d643f, 0xa3fa983d,
-	0x415359c3, 0x78129f8e, 0x181e02fe, 0x552e748e, 0xb7329f2f, 0xf0a9a2c4,
-	0x4df31b6b, 0xc8bcc24d, 0x8e153fde, 0xe8f6cc61, 0x1d4ea69f, 0xfdc7f309,
-	0xf6c614fe, 0xc7abdeda, 0xfba9d873, 0x818bab3f, 0xfc6dc8f9, 0x82899f3e,
-	0x7d4056a7, 0x0bf39b33, 0x98b53c93, 0x3773d9cf, 0xbefee273, 0x1b5ece3e,
-	0xdb7613b7, 0x51399db8, 0xe6c1fce0, 0x411e5aca, 0xbae86e6f, 0xef3ede11,
-	0x8f74d7c0, 0x2fb78c0f, 0x2f5e30d5, 0xfa0711c5, 0xd7ff752e, 0xe95c8eb4,
-	0x491f3d77, 0xc4847cfc, 0xe6ba2bf3, 0xfda66e26, 0xba1f6878, 0x4723da8f,
-	0xd2ded7b6, 0xed0681d6, 0x659fb7be, 0xa68372f0, 0xf5c62457, 0x05d16bff,
-	0x61b947bf, 0x5fda38de, 0x09e2d3aa, 0xe57a3a93, 0x2f7e76f9, 0x13d43e5c,
-	0x3c04784e, 0xd1a5d70f, 0x1e605533, 0x6048ffcc, 0x28028433, 0xdbcf36dd,
-	0xc2d24fd8, 0xd197be4d, 0x7165d85e, 0xe3a3d9a2, 0xd903eeab, 0x6121fa8a,
-	0x8fda31cf, 0x643a13aa, 0x8f97f7a4, 0xcb714d7c, 0x3275733a, 0x1b176dd5,
-	0xbdb4feb0, 0x99d6237a, 0x6fa9ebef, 0xd60c3f00, 0x13e3e1ce, 0x90bb63d4,
-	0x3b5829e8, 0x7e06ef57, 0xf5e665d8, 0x4b391f2f, 0x5ccbb1fc, 0xe18d9f3d,
-	0xef987af5, 0xaa6f58ae, 0x52905409, 0xe1fd65fb, 0xb7aeb09b, 0x77da92ff,
-	0x3f6e54db, 0xa40cde2a, 0x855d5f7f, 0x2ea43dba, 0xf2b33af1, 0xc55f9f52,
-	0x7f29af81, 0xe70f72b8, 0xce1bc447, 0xc3cdef13, 0x7a8ce975, 0xa4eb51d4,
-	0xd73673b8, 0x9f0301d7, 0xb753e7e9, 0x2a2cbc98, 0x085ecf44, 0xce42ff5b,
-	0x84a8b1d9, 0x38b4fe90, 0xbb033a76, 0x6f182b34, 0x2a2e64cd, 0x950f3187,
-	0xee96dbd9, 0xbb2db447, 0x7a89d5af, 0xfad73e2b, 0x68e89780, 0xd09e1ff4,
-	0xe8fae2f4, 0x01a31bfc, 0x7782f59e, 0xf17a888d, 0xe74ab365, 0xb2243a2f,
-	0x35b53b37, 0x5330ad8c, 0xf73b5cbd, 0x5de95e6d, 0xeef51233, 0x19ab9322,
-	0x4f0cb3d7, 0x2fbe19be, 0xaae19ddb, 0xe7bcc165, 0xc496d8b2, 0xef304ab1,
-	0xaa3faf59, 0xb546d9f1, 0xd2f786c9, 0x9543fbe8, 0x71d2eb6d, 0x7db3fb7f,
-	0xbd3c901f, 0x7c41951f, 0x447ad15c, 0xbf69daf6, 0x29f3c64c, 0xd6fad99f,
-	0xbef75a3f, 0x0b74196c, 0xeb2ff5ea, 0x79b8744d, 0x06f43d20, 0x38373fe8,
-	0xac6a87c8, 0x5dc2fe54, 0xde9a2d7d, 0xd3295105, 0xbfb4606c, 0x9156e990,
-	0xb9ade68f, 0x7c0ac1a6, 0x8eac82f4, 0x179b3e44, 0x5b7c4b95, 0xbe722b16,
-	0xdd07b964, 0x0dcfb692, 0x6535d4f5, 0x3c53bed3, 0x6f68c8be, 0x88526d54,
-	0xc80ec00f, 0xdca83e47, 0x7ee1f260, 0x4edac9a2, 0x45e77de7, 0x368fcd31,
-	0xaf5c4f9e, 0x6cdf3be9, 0xdcbddf1e, 0xf392c539, 0x511e7451, 0xe51fbfaf,
-	0x9128be24, 0x55ffb47c, 0xe741de72, 0x38fbbf18, 0xc879c356, 0x0428e3fe,
-	0x794e3e87, 0x57d21c70, 0x27ec1fe5, 0x6b8df83f, 0x4dd67b75, 0x3be5ac71,
-	0x9b05fcb4, 0xf3f6307b, 0x1827a6b4, 0x7780b1fa, 0xeeafa329, 0x1ccf4093,
-	0xf933d3ec, 0x90d3530d, 0x6cf7c1be, 0xb90f4192, 0xc1d3a025, 0xfbeead28,
-	0x51f6e47e, 0xf533ed61, 0xa986ccfa, 0xf3c3fb93, 0xb7582db4, 0x1be97b42,
-	0xe11d5f4b, 0xa1f573a3, 0xe3e9c5fd, 0xe9fd4bdf, 0xb51a97fc, 0xf80fa0f0,
-	0x27ac60ef, 0x7a7cf31f, 0xca273367, 0x8d4966e1, 0x21d08572, 0x37af8a35,
-	0x35afe725, 0xf7883fe0, 0x4ffd035c, 0xfb0d38d5, 0x968b8b8a, 0x549879d1,
-	0xc7cc5e9d, 0xca6d77cf, 0xfe27ec32, 0x16ae387f, 0x7000f70e, 0xc307fd4c,
-	0x5e30c231, 0x031c8e10, 0x870b577c, 0x7a6b3b18, 0x8f6bda06, 0x280f2898,
-	0x66b3e4d1, 0x6ff65da2, 0x0ca78a26, 0x880f3c67, 0xfb0de329, 0x2c7b99b4,
-	0x9efe31f3, 0xd2c3b129, 0xb7279458, 0xa9d716b3, 0x5f64489f, 0x39ab73c1,
-	0x726e870e, 0x204ffde3, 0x665fd495, 0x1f82b7b9, 0x82fbe6f2, 0x70d33efa,
-	0xbde3e595, 0xe7a39ba0, 0xfb8d18df, 0xaa1e7366, 0xe7983cc2, 0x352ff195,
-	0x92bc8330, 0x2c20d21d, 0xabe33b25, 0x701b87a8, 0x147076bf, 0xf6045bb7,
-	0xe4e1c370, 0xbcb9ef48, 0xf0f35b9e, 0x341b8c34, 0x8b5e74af, 0xcdb353fe,
-	0xf31fb2df, 0xe8531e76, 0x47acd6de, 0x50998dfd, 0x6899d717, 0xfd6314bd,
-	0xdf719adb, 0x176cc9fd, 0x68cd11da, 0x47fb60bf, 0x566bf214, 0xf0d338d5,
-	0x6d3a927e, 0x76b2d81d, 0xc1798ab2, 0x87148af5, 0x732addeb, 0x773c5cf5,
-	0x8dd1ee31, 0x51ebd60d, 0x071ab98f, 0x949ebca9, 0x339aeb8c, 0x7b463ad3,
-	0xae68c80f, 0xb1a8a675, 0x6ff0fac1, 0x3d20fac0, 0x9dc1b1b3, 0x2b2efd86,
-	0x883bfad5, 0xe2178a71, 0xef68bc34, 0xd2f4fb33, 0xcbcc06c6, 0xf5836b12,
-	0xaddf30a9, 0x353d72cf, 0xfb47fa18, 0xc3e3e60b, 0x877b057b, 0xca4e744b,
-	0x603b6306, 0x9991b67e, 0x0cd7dfb4, 0x2bef117a, 0xdfc91dee, 0xf234fbeb,
-	0xd3ed1370, 0x6f5c7b60, 0xbdbcc96c, 0x57df833c, 0x8a15db20, 0x307ac037,
-	0x149ef315, 0xf371ffa6, 0x8fb6a4b8, 0x01f78511, 0x75a3f084, 0xf73a32ed,
-	0xdc661d69, 0x8cd3979f, 0x16798975, 0xaa27bfa0, 0x4637e7c6, 0x8341f96b,
-	0x6dda0a58, 0x133e4dc3, 0xfcc91bb6, 0x02c75e54, 0x628d8f64, 0x8d1f541d,
-	0x1e16635e, 0x41d2725b, 0x2dcc71ab, 0x47aa38f2, 0x71313b44, 0xf2471eae,
-	0x74be414e, 0x61766b47, 0x7e3fef0a, 0xf7ca2cc6, 0xcdef69f5, 0x313d8633,
-	0x7eb5e60d, 0x50ceddc6, 0x2f5f4efb, 0x48adfb75, 0x68cbf983, 0xa0bda221,
-	0x364575db, 0xe5984f5e, 0xc6147a7e, 0x26cddb11, 0x58ad9fbc, 0x6f16638b,
-	0xbb444fc8, 0x5cdf68ac, 0x44d787b2, 0xd16cbb73, 0x77b219fa, 0x9af79e14,
-	0xfe7f764f, 0x183109ba, 0xb9b06fa7, 0xfe47ae62, 0xdfbf23fd, 0xb1ed4af5,
-	0x0a6bc4e6, 0xc19b1e50, 0x8ffbc6af, 0xcadd9a0e, 0x758be418, 0x6ccec8c3,
-	0xc7d6f28e, 0xffcdbf42, 0x41d574ea, 0xf73667fd, 0x4e3823f8, 0x8f7f1443,
-	0x6f2126f7, 0x3ff7edf6, 0x1e8c5c2f, 0xfdf0fc78, 0x91b183fe, 0x43bdf1ef,
-	0xfed05fc3, 0xd9dd90f0, 0xdcc4f660, 0xcbbdf087, 0xead679e7, 0x112f5189,
-	0x86b4fb67, 0xd67603e7, 0xe64058b8, 0xbd62d1f7, 0xdd3f68a4, 0x22d25caf,
-	0x097cdc50, 0x3a3d226b, 0xeed5894c, 0xc5e631a7, 0x4dbd1696, 0x795b4bed,
-	0x42d632fb, 0xe17a75ed, 0x8301b5bd, 0xf0ce3a1d, 0xdcd11dfd, 0x78acdd6f,
-	0xfffb431f, 0xc4d91991, 0x1167c04f, 0x07e22df3, 0x31b977d8, 0x371faf9a,
-	0xf6c8db62, 0xb863f128, 0xe05cb87d, 0xc207b3e7, 0x9379d553, 0xde0a3d61,
-	0x7ad3219f, 0x49f9add4, 0xeb7c9387, 0x7ff9846f, 0x244af59f, 0x23bddaa7,
-	0x425f8275, 0x33befaf9, 0x2d1bdeec, 0xa6ba680f, 0xcb43fe25, 0x6b3ef9ef,
-	0xfd0dc379, 0xf402cedc, 0x9eed61dd, 0x48a41412, 0xafd01979, 0x3adc1f41,
-	0xddbf58c2, 0x39dfac65, 0x7d3df229, 0xb4d46b6b, 0xd6aa7bd0, 0xf38e700e,
-	0x575e8d2d, 0x0b12df7f, 0x0b7bebcf, 0xf9815ee9, 0xc17fb494, 0x1b14faf3,
-	0xd91ea0f3, 0xfb46cfbf, 0xbc8a5521, 0x55164319, 0xbde2efe0, 0x9f9d8af0,
-	0x17ff4037, 0x998a05e3, 0x97de0fb7, 0x1251f7c4, 0x3c5a493c, 0x633495c3,
-	0x1b87b7d4, 0x0bca2afd, 0xdc46d896, 0x27e60d77, 0xe8edef1a, 0x0f38fe8a,
-	0xcf9863fd, 0xe84f8c6c, 0x3e7d5a71, 0x2c7f28ff, 0x39cfbb5a, 0x346b6e9c,
-	0xa30ba8f9, 0x39d23d73, 0xb973df07, 0x87bb52f9, 0x43c129ff, 0x26896879,
-	0xb3ac171e, 0x9c528eb9, 0xea0ff344, 0xf306b8b4, 0x56ef5d7d, 0x1095ecc2,
-	0xed7d22ff, 0x39f5f5d7, 0x38f377e4, 0x156a2d88, 0x360dc3ae, 0xfaa66ebd,
-	0x00a6e6d3, 0x5aaffdf9, 0x831f189c, 0x6718ddef, 0x411dcdf3, 0x065d5d7e,
-	0x0e7bc14b, 0xb4cbb0de, 0x6abdd6fe, 0xd8f5c669, 0xdb76f36d, 0xba49f242,
-	0xf9d1efec, 0xf9fd08a6, 0xf90dfd0c, 0xf8c1fd76, 0xfd7788ad, 0xa7f61bfd,
-	0xceff2202, 0x691bf949, 0xa17b1fed, 0x42cbb89e, 0xf7fd4f71, 0xe7cfca0f,
-	0x7a8cfdd1, 0x4e14137f, 0xd51ace87, 0x8e5d8f90, 0xe507377a, 0x67f49da0,
-	0x8320cb45, 0x69f5d4de, 0x681bf9c5, 0x57482cbf, 0xb5212e2d, 0x38aa5e93,
-	0xbc68bfff, 0x349e903b, 0xf7e9124e, 0x3549c781, 0x38e0e3e8, 0xf7700c93,
-	0xc132671f, 0xdac38fa1, 0x9fe70ca2, 0xae3ccceb, 0x33986672, 0x1e823626,
-	0x83714bd1, 0x60ff70c9, 0x62b2e49d, 0x4eca75ff, 0x287f3435, 0xef005f7c,
-	0xf02164c5, 0x867ac1d5, 0xf30b72c1, 0x3d405e52, 0x072213f6, 0x62a5d9a2,
-	0xf8c262bf, 0xc62ef9e9, 0xbdb945fe, 0x33727d10, 0x8bd82df2, 0x7e3b583f,
-	0x49ec0f95, 0x4769ecc9, 0x93764aba, 0x6b68f313, 0x45c51315, 0x64ac92eb,
-	0xca12adff, 0xbd739455, 0x2243a95f, 0x8f7df438, 0x9f29e681, 0xc33cd077,
-	0x9ffb3bef, 0x76a14f1b, 0x3b57eefd, 0x0f93d730, 0x93545bfd, 0x4e5d450b,
-	0x2127d853, 0x47ef0ff4, 0xec4520da, 0x8e9dbc27, 0x6ce901ff, 0x3d2070ee,
-	0x88a5e3ba, 0x951b1079, 0x310798ef, 0x271f4c2f, 0xe00ecd1c, 0x238742f7,
-	0xe5f48323, 0xa5f50546, 0xdc9fccfd, 0xb4cbd24e, 0x7fafadef, 0x56a984e6,
-	0xbc6c4f9e, 0xfe206f57, 0x7d62f1d3, 0xf3c641f3, 0x7f94bd53, 0x483c3972,
-	0xfb43cb82, 0xe2297600, 0x425836be, 0x4938fc86, 0x354fe631, 0x63e21e48,
-	0x56d54df3, 0x5b4927da, 0x927dc569, 0x063392d5, 0x37ded8fd, 0xf983fec1,
-	0xbe793a35, 0x6bff786a, 0xb4661ef0, 0xc4531573, 0x06a379fb, 0x34baafb0,
-	0x77d9acfa, 0xf501fe69, 0x3775c1e1, 0x71524e2a, 0x399b35dd, 0x4bad03bc,
-	0xe103bf7a, 0xfc7dd1eb, 0x392c1bf7, 0xffae3f56, 0x4a35e3e1, 0xbc3e4f1e,
-	0x7078046f, 0xcd31acdf, 0x546df84d, 0xd5fd1525, 0xcc5111e8, 0x656fea1a,
-	0x67f7a2cc, 0xccf1e3e2, 0x8f8c6b22, 0xe3a3979c, 0x1df2b769, 0x186f1ded,
-	0x8f7f0e5f, 0x7c21e8e2, 0xe84ca9d9, 0x91bb97cf, 0xfc381317, 0x5aa6f7a1,
-	0xbc458633, 0x7f1fb27f, 0xde4df186, 0xf7e74664, 0x19b94306, 0xeed56efa,
-	0xb5c0aa43, 0xf2f4fc0b, 0xc2a6147b, 0xe477e6fa, 0xc939405f, 0xcfcfdf6b,
-	0xf026b4d1, 0xefb51e7b, 0x625dc7c3, 0x12c8fee7, 0xcc654abb, 0xf12ff751,
-	0xdb5a37f7, 0x5e789ca3, 0xb22e35b1, 0xd763931f, 0xb49a68f3, 0xb41d0873,
-	0xcfb7a14f, 0xcddcc79b, 0x1b3dc50a, 0x257fe0ad, 0xa9ffb5f4, 0x82023fb6,
-	0xf9dce30b, 0xf99aebdb, 0x7f3e51f9, 0xfb62ab8c, 0x5c8ec4c4, 0x740efc41,
-	0xf70cc6db, 0x3b5855db, 0xe7ce51b2, 0x7699bc9a, 0x68eaa718, 0x5bd62247,
-	0x4e9d3edf, 0xb71d6f7e, 0x47777b37, 0x3fa0dc53, 0x79f96a7d, 0xcc29f3f2,
-	0xdd3fa837, 0xad00a5ca, 0xd3e7e5ab, 0xcd1c6f99, 0x0b8d67db, 0xc2d3bfbe,
-	0xc8b1a4d8, 0x884f1c00, 0x30f4489f, 0x7a064ddb, 0x675e3c80, 0x7881e8d7,
-	0x76b7a3ea, 0x76a74bef, 0xcd71e0bf, 0xf72a615f, 0xa5fbf5d7, 0xe5f7678e,
-	0x5b7dd05b, 0x13f736e5, 0x3b0b4f78, 0xe6be5222, 0xfefc29c2, 0x771685c4,
-	0x0b57da0c, 0x6a1453ff, 0xf3937f69, 0x7f0d22fd, 0xf745cc9d, 0xdad6f80e,
-	0x984ebef8, 0x54f1967f, 0xc23fb8fe, 0x44da8bf7, 0x305f1bca, 0xbf61f145,
-	0xbf05ed79, 0xe2f9fdc4, 0x773a68c6, 0xae7bf0be, 0x2dd76893, 0xc4e6c27c,
-	0xfe597bdf, 0x327e6641, 0xc9fcbbf4, 0xdf07d50c, 0x24f0af45, 0x27a05d59,
-	0x8853db1f, 0x3083457e, 0x0630be7f, 0x0ec7cafc, 0x98b8c2ac, 0xcf94cdf4,
-	0xf47f506d, 0x615677b1, 0x18b7e9bc, 0xf63b26e7, 0x63b442dd, 0xf4d0425f,
-	0xc1c03ffd, 0x5a4d874b, 0xa9aac4fd, 0x4daff2a0, 0x2a293568, 0x562765fa,
-	0xc4d939e1, 0x1318f738, 0xfd8ef78c, 0x6fec42b3, 0xcea313c1, 0xe7f7806d,
-	0xbec817ed, 0xdf693a00, 0x014f370b, 0xb278bbbb, 0x582d975e, 0x86668f8f,
-	0x3339be38, 0xd9da3e38, 0x8b7c7aad, 0x718cdd45, 0xd505e3f7, 0x3fe82453,
-	0xceaea1c3, 0xc4d8c919, 0x1baaf9f5, 0xc476cfc6, 0x98f18cdd, 0x837dbed6,
-	0x1f18d5f8, 0x03de656b, 0xd37f7866, 0xb66e43e3, 0x07e36202, 0x30a8c679,
-	0x29d641ff, 0xf4dfa7ab, 0x4463e41d, 0x0d59f3bf, 0x939204f6, 0xf4d28843,
-	0xc2defc15, 0xe34ef93e, 0x1f57db7c, 0xc3cfc1d1, 0x5e24f5e8, 0x59195d6f,
-	0xc312dc5f, 0x2a35baf9, 0x4d66fbf2, 0x03be003f, 0x8b6d7f14, 0x08cf0ff6,
-	0x1f900fea, 0xa79224eb, 0x807f5c75, 0x93b4cd1c, 0xefec46dc, 0xab6bcadb,
-	0xab79af76, 0xf8c68ee4, 0x30c7ae82, 0xcce38682, 0xfa0d3bb5, 0x017daf39,
-	0x3151d7e9, 0xc9c7872a, 0xc53093f1, 0xb59847a8, 0xdf743b3d, 0x3cda77fe,
-	0xe3d3ae33, 0x7439013f, 0x8ef969df, 0x9f9e4bfc, 0x7f38c72d, 0x9c1dbd88,
-	0x678a54c7, 0xfa17ebf4, 0xbbfd6a73, 0x5f04ae72, 0x15f065ea, 0xdcbaf84f,
-	0x19fd833c, 0xfbfd2fe3, 0xc17db593, 0x223ae326, 0xa4f38647, 0x7f8027ce,
-	0x2cfe8853, 0x9ea9f4d6, 0x6bbdd107, 0x064fe524, 0x31e7e5c7, 0xc4bfbe81,
-	0x81f25ddf, 0x963d453e, 0xc56fb927, 0x71ed79f6, 0xc0efda2a, 0xbf1af56f,
-	0x3a6fc849, 0xaae35b9d, 0xebbe69f3, 0xfa4bb204, 0x3ada41d9, 0xd024d79a,
-	0x9e0d99ef, 0x87e715e7, 0x7beba7c0, 0xeb55bfe8, 0xe7e73c7f, 0xf9f8fb67,
-	0xcd1f943e, 0x0eae679f, 0x1c3d5fba, 0x732885fe, 0xd5eb2109, 0xeb8a36ab,
-	0x5abb78eb, 0x85edd7fe, 0x25d701f2, 0xf8377d07, 0x84e1c068, 0x1e518b76,
-	0x7cb55f50, 0xb664f742, 0x7f0c89b6, 0x8de700b2, 0xd74f237a, 0x8795be93,
-	0x5bb2240a, 0x49d97a82, 0x37ae8bf6, 0xb06b5603, 0x2bb5b9fd, 0xaf51eb0b,
-	0xc7ecf76a, 0xc7c5a08b, 0x7348e106, 0x9277bb70, 0xddfc4597, 0x5dbb1cb8,
-	0x8f3423d7, 0xe80a2b8d, 0x6d2a855e, 0xe1d49d3d, 0x345378a3, 0x104271e2,
-	0x7d7afa1f, 0x15e3a5a7, 0x8197bced, 0xd83af51f, 0xaca69525, 0x7ef8ff60,
-	0xe7df0866, 0x841f3839, 0xeabbe7d3, 0x0f83c027, 0x0d43f0f1, 0xc75009ef,
-	0x04982d7b, 0xfde617eb, 0x6b5c50cc, 0x56e04232, 0x104e3eb8, 0x5d8f5c4d,
-	0x07e22e46, 0x58f7ed31, 0x41cf24ec, 0xe5bb707c, 0xe7168701, 0x3f29eed5,
-	0xa1390268, 0xcf3e367d, 0xd4c95dee, 0xddad6cef, 0x6f2f4bdf, 0x7496f2d6,
-	0xb5e2b17b, 0xf846cdd4, 0x1cbb7f79, 0x47792f1c, 0x8ed063dd, 0x5c51ee19,
-	0xb5e41fe8, 0xf98fdccf, 0xf07bd924, 0x7c820407, 0xe5c2dd9e, 0xc34bb814,
-	0x43db9bcb, 0xd874adfb, 0xbbfb3975, 0x28fb23cc, 0xcba457e7, 0x5a72217d,
-	0xbe3850e3, 0xc4167e60, 0xa3d464a7, 0x83f7f97a, 0xcf1fb3c3, 0x3e039525,
-	0x78eb6d50, 0xbf996d6b, 0x7c7286d2, 0x8e50b994, 0x9be65bbb, 0x315d2146,
-	0xa219cc11, 0x79f3d61f, 0xf02876e8, 0xe5f20b65, 0x1a10c73a, 0x7751f86f,
-	0x1fbc0e74, 0xc613768e, 0x7eec5b7d, 0x0efc23f4, 0xe2072eef, 0x14ef5673,
-	0x8cad4fdc, 0x85b5aeae, 0xdf6bef3c, 0x8f89ed06, 0x1fee22bd, 0xf8c03f95,
-	0x7cdaf1bd, 0x02cfa9a0, 0x20c855e3, 0x0f5459a7, 0x655ade20, 0x3ef7bede,
-	0x5611a5fa, 0xf97bf229, 0x95befd60, 0x536df3f8, 0xfd17d21c, 0xcb93b424,
-	0xee1a4f45, 0x16c1b27b, 0xe003ae17, 0x1fbf1077, 0x06c931b4, 0x4a1efffd,
-	0xc4d3d3d4, 0x6b8e74a5, 0xfb40965a, 0x8f7fba44, 0xa4fd0b7a, 0x4d17bf3b,
-	0x3c2ec8fc, 0xd3e30c38, 0x4e9cd109, 0xeb558fd0, 0x1b1d6ac7, 0x48ffbf94,
-	0x8efe491f, 0x141dbebe, 0xe0e7ea04, 0xd735d74d, 0xd841f885, 0x83ffea1f,
-	0xa5b48cc2, 0x1f9affc8, 0x7c61f647, 0x7b45dd70, 0xce21ac65, 0xebe0d3e6,
-	0x0a3e4748, 0x3ed147b5, 0x7d67b3ed, 0x0cdf57f3, 0xf4e2767a, 0x715e0096,
-	0x6e8acb5f, 0x6fe817fe, 0x36b3d81a, 0x8d3ec3c0, 0xf8660e2f, 0x3d4fdc44,
-	0xfba05c38, 0x79450fdc, 0xe095aa73, 0x5c5a8938, 0x33cb5120, 0xe5e28c4f,
-	0x1eb8620f, 0xaf863cfc, 0xbca837d7, 0x1c88e89e, 0xbdad9847, 0xeb89a9ff,
-	0x91f935f7, 0x684fd1f3, 0xedaaf5fa, 0xfc211cde, 0x8e13eebe, 0xdd7dda09,
-	0xe3c76f94, 0xfe340bfd, 0xe8873b06, 0xf8abb414, 0x876e9d7e, 0x4d9f6d9e,
-	0xf78213f5, 0x2c047bbd, 0x9f904f3d, 0xf148aef4, 0x6f58e2a1, 0x55a5e622,
-	0xcb8e4544, 0xf4f0d20c, 0x38a30d59, 0xcfdc29ef, 0xb7bfe6cb, 0x1b25f585,
-	0x1d7ba49e, 0xe29f994a, 0x1a1b45bd, 0xc8aebf68, 0x80a7302f, 0xc78799fe,
-	0x943a3581, 0x710d116e, 0xb552c5e7, 0xe4139b1c, 0xae1dfc5b, 0x9b25f7d0,
-	0x57ea19c6, 0x1816976f, 0x7a823bf2, 0xbfec90a7, 0x3e757ef0, 0x8f4fb70f,
-	0xf10d38d7, 0x861b05ee, 0x78cdf217, 0x73217ede, 0x36177cd1, 0x11ef1966,
-	0xb2b84c6e, 0x1ec1827b, 0x538445f5, 0x3fa8fd26, 0xf7f80e3f, 0x17f7c485,
-	0xe08c3a7c, 0x7bc38bf8, 0x8e018c5d, 0xc433e668, 0xdff326cf, 0xf8f1b429,
-	0xef8ff023, 0x7e407652, 0x07f577cc, 0x1fc01dae, 0xfa87fdc8, 0xb9937903,
-	0x024d65fe, 0x9c4ce0e5, 0x66cfb46a, 0x6e75f0c7, 0xc1b44c76, 0x679a2b3e,
-	0x6b57376c, 0x776b5737, 0xa84a38b9, 0xa164265d, 0xe9fde33e, 0x71951fbf,
-	0xffca6dfa, 0xedc310dc, 0x6eaa9fd7, 0xbbf40c6f, 0xd0773b56, 0xefdade6f,
-	0xf735ad4a, 0x5e5285e5, 0x1e6fe6e0, 0x09dfc3ac, 0xf601dde9, 0xfcc1e83f,
-	0x7ba0df67, 0x6eeff4ba, 0xb432d15f, 0xa954f008, 0x8bb973c9, 0x15dcafcf,
-	0x3f418790, 0xae1ce529, 0x827d96b4, 0x5a5df214, 0x22b76f09, 0x2ff06cc6,
-	0xffd5a27f, 0x6549c635, 0x1840495a, 0x3652ed06, 0xec24116d, 0x0b577f0f,
-	0x66a949e0, 0x93dfd0fe, 0xedcf194a, 0x6fc7db9a, 0x04e61616, 0x9a68d0f1,
-	0x5c62a391, 0x85da3135, 0xaa47cceb, 0x50f10eb7, 0xce8051fe, 0xa8fc4c49,
-	0xbdbb425d, 0x23d7755b, 0x7078eb7f, 0xae0a6a8a, 0x711fd1a3, 0xfcfa9b38,
-	0x30bebe62, 0x4766a8f6, 0xe976eb37, 0x42edc661, 0x5712a75a, 0x3efc308e,
-	0xb69c6261, 0xef32244e, 0x37da854e, 0xa327a232, 0xccae24f9, 0x2c76e66e,
-	0x2cb4f7a7, 0x3e7c16cf, 0xb1c8f06d, 0xd647df78, 0xbf8480da, 0x26dafe3b,
-	0x51fbc453, 0xc3fc359a, 0xf9c59e3c, 0x9cb8f3e9, 0x99dbd05e, 0xe84f8807,
-	0x3d3d10f2, 0xd8c1dfb2, 0xff3ef4e3, 0xe97bf8d9, 0x997acafe, 0xc74e4f7e,
-	0x69eab77f, 0xb4a6bc41, 0x3708166c, 0xdc7a78da, 0x5ca39f0e, 0xe78d971e,
-	0xfb94073a, 0x16873b15, 0xbd7dca85, 0x1cd9f44c, 0xdbafe796, 0xe1887ff7,
-	0x5890eaeb, 0x4bc43ecf, 0x8a3adb65, 0xc2d92cef, 0x4067f77f, 0xfe215cfc,
-	0x07ee1284, 0xfbe1cf94, 0x4acff95e, 0x7ab2ff44, 0xe5acfbfe, 0xb8f077db,
-	0x0b998fce, 0xcb7943f5, 0x0728a10e, 0x8773077f, 0x9f0428b0, 0xca7ee5a9,
-	0xaec6bf83, 0x5bd71fcb, 0x718efce1, 0x0e53b462, 0xe87eb8d9, 0xb87c57cc,
-	0xf669dc1f, 0xcebb6396, 0xe61768e4, 0xfff8e977, 0xe99b8efd, 0xa77db5dc,
-	0xa3658025, 0x8ac939a9, 0xcad70efb, 0x6eabe42e, 0xe9127bd5, 0x5a792713,
-	0x78d8fbf1, 0xbe16abbb, 0x58d85a75, 0x3c72b955, 0x8fe30c4c, 0x72e63f89,
-	0xf43aa493, 0x24b186bc, 0xeb9daa37, 0x67d7132d, 0x1e7ccc87, 0xf787193b,
-	0xb3ee3107, 0xe3878724, 0xf294dc68, 0xca1f9d00, 0x70d3bd38, 0x5fc830ce,
-	0x1b7dbfee, 0x2c3fff7e, 0x00284ba1, 0x0000284b, 0x00088b1f, 0x00000000,
-	0x7dd5ff00, 0xc5547c7b, 0xbddcf8f5, 0x0dd90afb, 0xdc3bf79b, 0x24280c10,
-	0x01049e6c, 0x878424d9, 0x28026e20, 0x47796bc8, 0xd2026c92, 0x6dfad0fe,
-	0xe5318316, 0x16d46b6b, 0x882ea945, 0x835ab696, 0xb80d06a2, 0x47d62228,
-	0x2d8aa523, 0x2220a5da, 0xfb1b6484, 0x6fcb56c0, 0xec9999ce, 0x0f0d9bde,
-	0x7cf9fb6b, 0xdcc98fe1, 0xe6739f79, 0x9ce7339c, 0xb5331d99, 0x228ca8cd,
-	0x389aa6a4, 0xfd2d34bc, 0x84e90ee9, 0xf00b9085, 0x8321226f, 0xf121326c,
-	0xbd3ca484, 0x582c524d, 0x1c5a7fbe, 0x052627d6, 0xaed84bbe, 0xa0af9686,
-	0x84225ba9, 0xa0e4258c, 0x31cc7881, 0x2ae8b484, 0xfd68d947, 0x7b488496,
-	0x663b2d13, 0x68db4573, 0x9d63967f, 0xeab4ac07, 0xa33e6398, 0xda4bf68b,
-	0x4264c7e9, 0x121230de, 0x8c1ddb41, 0x6dd3ed60, 0x42229074, 0x07891b26,
-	0x233d1bbf, 0xc1dfda14, 0xbfb083a1, 0xa6eab797, 0xc37b697a, 0x19d8b220,
-	0x9b74ef32, 0x6ca5db0e, 0xe8e921dd, 0x5a48b8f7, 0x513f321e, 0x595b01ef,
-	0xcc67cc26, 0x43844ed4, 0xae3d56dd, 0x1ce8c2a7, 0xb05466b6, 0x8fe868de,
-	0xe6ed7bd6, 0xfa7e8c4f, 0xbd2fc7fd, 0xbf50246f, 0xc1b47255, 0x37df5bfc,
-	0xa9a1c9ce, 0x4932e7e7, 0x613a6420, 0xf0bf36ff, 0xdfa151be, 0x70a6efa7,
-	0x76eaf5a2, 0xa32fd2ef, 0xc5a95769, 0x24268d23, 0x8b6bccf3, 0xdefd2148,
-	0x74112266, 0x5736dd6e, 0xfbce8d91, 0x0e535dcd, 0x58845149, 0x20f9339f,
-	0xc421f015, 0x06b4e19f, 0x3a5225e7, 0x722fce30, 0x10b3fd2a, 0x55ef46b2,
-	0x95ddf099, 0xb7eb4559, 0xccf830c6, 0x42e0cc1f, 0x157bec2c, 0x0b80975f,
-	0x8c0a7f1d, 0xdce5915f, 0x2454fd01, 0x329bd846, 0xaff99e61, 0xebdc2999,
-	0x823d92ec, 0x672b8d56, 0x579d0cf0, 0x79b84e65, 0xe2f1c06d, 0x44f8d963,
-	0x7180cfef, 0xefb2f109, 0xf9216932, 0x3873f6c1, 0x1f77e9be, 0x3a864efb,
-	0xd7f38273, 0x4d836fe2, 0xe861fac2, 0xa3ac116c, 0xc7cf98f6, 0x0f53ace8,
-	0xe6799674, 0xd043e230, 0xeab6cfcd, 0xd5fd1531, 0x5fd88cd9, 0x708f4d9d,
-	0x1a780cd9, 0x2c03534c, 0xcc1ba69a, 0xc7850f5e, 0x1f26f39b, 0x7e297292,
-	0x20fa316e, 0xb4b7437d, 0x48dfca16, 0xe8b7e361, 0xdf216b74, 0x34859772,
-	0x6e1d5e21, 0x376bcf98, 0x6a7e2147, 0x26bd1ae7, 0x9f8fcfda, 0x63de5897,
-	0x67fa12f1, 0x72f66bad, 0x22e24768, 0xfe024fec, 0x738c075c, 0x4ae9fdac,
-	0x51bf6e79, 0xb7a7dfa1, 0xf027fdb1, 0xe8c6db50, 0x0107ec4b, 0xbd3c20d7,
-	0xf024fdaa, 0x8db07f31, 0x17a505d1, 0xcecd7780, 0x3349db08, 0x0102eb1b,
-	0xe5568cfa, 0x6d93dbeb, 0xf3044727, 0xd007f035, 0x81620ec1, 0x79f2d679,
-	0xeeb9d3ce, 0x6755fd83, 0x50341ff6, 0x0d1f16d4, 0x881f7ee0, 0xffd66b7e,
-	0x0164fb3a, 0x0e93ab21, 0xadf62a61, 0x7f7aa861, 0x6f78e56f, 0x7bb69482,
-	0x4d4dd382, 0xcbee1b61, 0xb80d939a, 0x19532d9f, 0x231cb35f, 0x133c508e,
-	0xdebe43f2, 0x457db17b, 0x9964db64, 0x71e2bdc2, 0xfa44d6c9, 0xaba44fcf,
-	0xa36ce224, 0xf5b67dfd, 0x0025a8f5, 0xc82eafdf, 0x37ae98a4, 0x3777ad82,
-	0x3b5d3be7, 0xde91c029, 0xcc248c1b, 0x3fb72f7a, 0x01223be2, 0xec386b3c,
-	0x1f2e9ebb, 0x17a529fb, 0xf6c1cecf, 0xcf92e8ab, 0xf6eb3d3e, 0xbbbce94f,
-	0xcbb44c76, 0x4e4d3640, 0x7c409fa4, 0xa53b7d84, 0x4c99389f, 0x37de2895,
-	0x351ebdb4, 0xfcfbb68e, 0x81f3a397, 0xf7cdbf6f, 0xe5e799fd, 0xbb9700f5,
-	0x75ecf67e, 0x95e35e50, 0xce304d62, 0x95ffc7ce, 0xdea9fb42, 0x26100f51,
-	0xd57cbf4d, 0x74f5a7e8, 0xfbec6dde, 0xa836c1ce, 0xf713f9f7, 0x6ef0075f,
-	0xf2c26b6a, 0xc36c4f33, 0x7b3f6bfc, 0x683fdf76, 0x94675abd, 0x799dea1d,
-	0xa5e23f7e, 0xc077a5d6, 0xeba2077a, 0x33f6bbcd, 0xe126d97e, 0x1973237e,
-	0x2d74131f, 0x9ff3f7e8, 0x2a1b1e2d, 0x16f7c437, 0x833b9723, 0xcb391c98,
-	0x994d6ff7, 0xb3d205a5, 0x85cc44cf, 0xfe8dbaf5, 0xcf9868ec, 0x1f174628,
-	0xb6d47871, 0x2db831ad, 0xf9fb1ed8, 0x487bee80, 0x9e7d2873, 0x6b4ef4a2,
-	0x0050b8ed, 0xeb0afde3, 0x11257ad3, 0x2f37be14, 0x7cc12e38, 0x18354722,
-	0xbf9e706a, 0xd574e564, 0xebc5e5a1, 0xe96a3d18, 0x059b0be0, 0x907d8beb,
-	0x4d32bbb2, 0xb2603e41, 0xd6ce3e33, 0x6aed5297, 0xd7efd2b2, 0x65d973af,
-	0x4f97c78a, 0x4a9c9e1f, 0x211b3ff3, 0x65fe2015, 0x8f39c989, 0x5ba9c705,
-	0xd04e465f, 0xd9a2eaf9, 0x11b0497e, 0x07c8b5fd, 0xd7ba31b6, 0xf205bd13,
-	0x89f200fa, 0x072e16ba, 0x1279b077, 0x96632073, 0xae59db15, 0x83ce098d,
-	0x3058b3b6, 0x29b8c81f, 0x678ee407, 0xc51dca2e, 0x233df388, 0xe4f101f8,
-	0xee09cc2e, 0x711d04b7, 0x8c13fe01, 0x7e30b534, 0x4ffb4953, 0x8a4d2e8f,
-	0x09a60a2e, 0x16b95883, 0xf2f0b74e, 0x923b451f, 0x3b5e01a2, 0x60f25563,
-	0xdaf2be20, 0x6e4cddcd, 0xe91c72bf, 0x08740dd0, 0xaa4ebbe3, 0x6472f6e4,
-	0xf70e94ae, 0x5c3a471c, 0xabf8cede, 0xb8d4bdbb, 0x259ba68c, 0xefe61732,
-	0x7404f4e6, 0x9bf9a764, 0x7d71a3a2, 0xd9fcebee, 0x39baa7c0, 0x61ef75dd,
-	0x4e86f6f4, 0xbcf801e7, 0x36e47db1, 0xf95a0790, 0x113b5528, 0x6f8a6edf,
-	0xd67a0493, 0x67a0c3ba, 0x3b1355d5, 0x6ef757ec, 0x081a1fbe, 0x7b7707ee,
-	0x2fe872e5, 0x5d9a6e35, 0x992f5096, 0xeef34a9c, 0xfb04525a, 0xd96b652d,
-	0xd20ba01e, 0x20ab912e, 0x0ddced5f, 0xab8fafed, 0x2099cbb3, 0x9927b6f7,
-	0x47ebfd69, 0xcdfb6314, 0xf4294ae9, 0xb620a9e7, 0x706f2127, 0x9cdb3ca1,
-	0xf20ed23c, 0x88daedce, 0x0651177a, 0xb89ca1d9, 0xbea16bf4, 0x6c80b3db,
-	0xe3ecc292, 0xcb03923d, 0x08de91bd, 0x3b7a7eda, 0xeddc7fd3, 0x139f1f6c,
-	0xa1a911f0, 0xd78c1173, 0x788982fd, 0xbd9d20a4, 0x930a67b9, 0x509a2fb3,
-	0x746d9ece, 0x34541390, 0x10568c8f, 0x358e02af, 0xa03a99ad, 0x9966425b,
-	0xf8cb1e60, 0x4c0d5a3c, 0x3973446e, 0x9b2f7590, 0x1fbe72c7, 0x78eb4796,
-	0xaffbe46a, 0x9b05c995, 0xe0e41727, 0x921e3e39, 0x73970245, 0xe5bae874,
-	0xb527dc3e, 0xe2feb34f, 0xdbbc8e4c, 0xe855e842, 0x6c7a5a47, 0x6ca6e3e2,
-	0x3301203d, 0xa55ad949, 0x57d7e7da, 0x5d3d5f13, 0x755bf5e7, 0xa8b989be,
-	0xfc82dd37, 0x6c91837c, 0x77f7fa97, 0x5be3344f, 0x3cceb115, 0xcdd7e409,
-	0xfa3fd416, 0x8720e9f6, 0xb8f4022e, 0x84dec97c, 0xea1670ab, 0x09d3bd68,
-	0xede03b56, 0x5a8e1c47, 0xbdafab7d, 0xd19c0f46, 0x4325c9ea, 0x4186e969,
-	0x549e0173, 0xa198b75f, 0xa7b68d9d, 0x8fb612f5, 0xf213627b, 0xf7ec26ab,
-	0xeb1b68f6, 0xd859d627, 0xcb2e2c00, 0x27c98eb9, 0x7adc3dab, 0x9e85a3d2,
-	0x074f28bd, 0x82db33f4, 0xafc7e1fb, 0xbd194b48, 0x01284151, 0x41fdb23d,
-	0x5278fee8, 0x3d447a41, 0xf4e0ddca, 0xb647a786, 0xaf54dc5f, 0xd29b3d02,
-	0x27a65ae3, 0x4fdb085b, 0xa7232e8c, 0x7c007932, 0x159f542b, 0xefbb54fb,
-	0xedf6fd05, 0xefdccbfb, 0x1fb606dd, 0x801c29bb, 0xfce8fbde, 0x9be74665,
-	0x48fdd036, 0xfdd137cb, 0xffc214d8, 0x981fe7b5, 0x04079c27, 0x73663dbf,
-	0x745f0076, 0x19ab7f6f, 0x47f396c9, 0xc83fcbf7, 0x65de98be, 0x5fb4ca86,
-	0xa1afdd33, 0xe0a663f4, 0xea63e6b6, 0xb9113901, 0x8947ad5e, 0x266883f4,
-	0xdeb1bebf, 0xa3d24238, 0x55f1c3de, 0x007d73ab, 0x46f41e7c, 0x6324114a,
-	0x131bd33d, 0xde00e640, 0x417a47b6, 0x20484e3f, 0xccc2e7ae, 0x67df3f67,
-	0xfce29f02, 0xeac51090, 0xff7df2f7, 0x4ff7af29, 0x4b9c869e, 0x3a283f70,
-	0x0f2271d7, 0x3b448f2c, 0x172c2f3a, 0xd73be9f3, 0x137cd998, 0xbedecaee,
-	0xc18f0429, 0x3e75757d, 0x5eeb37e0, 0x25a97e9f, 0x8b908e38, 0xf981ba5a,
-	0xf581fc83, 0xb81a8e54, 0x7e7eeb5e, 0x71d0d33e, 0x7b5fdf04, 0xb482b8a8,
-	0x2bfbe0d5, 0x5635c7ee, 0x2522fa02, 0x9d2c4707, 0xe1befd57, 0x088d1f6c,
-	0xeafb4364, 0x314dd758, 0x9331dfb4, 0xdfa0fef8, 0xa09ce0ab, 0x0c531e27,
-	0xf5e0dde0, 0xd3f9e087, 0x8f7fd618, 0xe991ecd5, 0xd623b8fe, 0x3ded0d15,
-	0x03eec465, 0xe5077339, 0x896fb027, 0x4df808af, 0x0147f13d, 0x5d58c79c,
-	0xbf4031f1, 0xc9366772, 0xf257fca2, 0x63f7c2e7, 0x84b95111, 0xfb71f3f6,
-	0x85799f6f, 0xcaf85ab6, 0x03df85b9, 0x22317afa, 0x18e2e803, 0x513b97d5,
-	0x830656df, 0x944bddbe, 0xfc30b6c1, 0xcc0ba457, 0x20beb33a, 0x55663f98,
-	0x7a442f9f, 0x6fc30c4d, 0xe214f9fd, 0x09fe8589, 0x627bbf9e, 0x1f5df614,
-	0x56ea8230, 0x78833e7f, 0xeb1f7f68, 0x985b7548, 0x30c53771, 0xc84ddb7a,
-	0xf7e570d4, 0x0f7671f1, 0xb030fb65, 0x7f02f24d, 0xe1bf5eac, 0x07e532cf,
-	0x3eacebd5, 0xe831694c, 0x8f36d56f, 0xc7f3474f, 0xd11f8c0c, 0xc5cdb37f,
-	0xeb47b941, 0x0e03c7e9, 0x4b20f43c, 0x2e52e0f9, 0xbc3596b7, 0x13d825f9,
-	0x3cc4f5aa, 0xdcb3f69e, 0x4a983cec, 0x2cb33e8b, 0xbfb6028f, 0x25b73bf2,
-	0x5c4a5c80, 0x32eccad0, 0xf40d9264, 0x4331c95e, 0x317910be, 0xfa8f4b3d,
-	0xe29fe231, 0xe7188beb, 0x82f7c04c, 0x80f504c1, 0x7a45b705, 0xd07c213d,
-	0xa5a1e1cc, 0x7eb84f9b, 0x767feda5, 0xfe81196c, 0x739ca23a, 0xdc163e81,
-	0xcfc54e76, 0x53ff25ba, 0xad5d028f, 0x649fdab1, 0x433865dd, 0x623bfee8,
-	0xc43af3bc, 0x675e4f53, 0xa04cfaf6, 0x87c640df, 0x30eacf60, 0x940a3cd9,
-	0xa2cf111b, 0x291a9fdd, 0xe60ecbe3, 0x361e9e97, 0x196be819, 0xde0337b1,
-	0x1244b597, 0x033f084f, 0xc3e81805, 0x3f609e7d, 0x3cde3b4b, 0xaddcfc0a,
-	0x2c9d23f7, 0x8f105b35, 0x9c7af3ee, 0x74316907, 0x8a7b45f9, 0x8e5123fb,
-	0x9e7d60db, 0x9f47c67b, 0x263f491a, 0x7eb8efd2, 0xfdf0edd7, 0xe228c8a1,
-	0x4b78fa00, 0xf3a70ef6, 0x832b35ef, 0xeabc2863, 0x460e948d, 0x734e3763,
-	0xd243fe88, 0x77fc6aac, 0xcc25f5bc, 0x65d9b967, 0xc2be3904, 0x32a7cf41,
-	0x6457c9e0, 0xef8a151b, 0x9185f2f1, 0x45ef8f97, 0x6c7fbf7c, 0x661ff4a4,
-	0xe1c7dd1f, 0xa5ea23df, 0x71f27db0, 0x0e7ea906, 0x4a686bd2, 0x943c7ddb,
-	0x3e79f3e7, 0x604bd79b, 0x9f7c1df9, 0xeacb9c7c, 0xc5f1c769, 0x3b36fe30,
-	0xe015b1d6, 0x8cf9db45, 0x22fb1740, 0x16b7a8bc, 0xfc077e52, 0xea3a6d6d,
-	0xedaf94ad, 0xc4d97ac0, 0x4cf58d17, 0x03485728, 0xcfb07be5, 0xcf84148b,
-	0x274a52a6, 0xd7b03cb4, 0x04aedb64, 0xa9f02af1, 0x8c7b63c5, 0xc3c9eff4,
-	0xd43e9251, 0x61e5428e, 0xa3b30c7b, 0xd27f6118, 0x9e991899, 0x85f10c36,
-	0x3e5f2274, 0x608c6ebe, 0xf4fba078, 0x7bd418b5, 0xfba1397d, 0x97c704e5,
-	0x0f1f67e0, 0x8ab5e352, 0x5e6de1e3, 0x8d8c516f, 0x007b4fc9, 0x31c7ddf7,
-	0x165c7eac, 0x0f424393, 0xcb8703ff, 0xc8549a4d, 0xd5533195, 0x1c4dc5fa,
-	0x44c5379f, 0x087ebc09, 0x88f215f3, 0x345f17f2, 0x5e0b0fdd, 0x217f2135,
-	0xb0d9031b, 0x63bd68ff, 0x2c0a6e58, 0xe472a58a, 0x18dfaa26, 0x22ddb1f3,
-	0x3cefdf68, 0x85d04a3f, 0x3e9c8095, 0x1853d625, 0xe54f7e40, 0x296bae1d,
-	0xba437ca1, 0xd037fe34, 0xd694c93a, 0xd8560c87, 0x03a64ef9, 0x208fed02,
-	0xe147f40a, 0xb850e7fe, 0xc63bc76b, 0x319fe0e9, 0x96f11e92, 0x9f70f247,
-	0x7585ffbd, 0x9cf2ed21, 0x51d1eccd, 0xceb8ffbe, 0xe9fa0175, 0xd42dfdba,
-	0x7d198fcb, 0x3096add9, 0x63df46e5, 0xf2c1490f, 0x3d973fc5, 0x762fca46,
-	0xe4fd7677, 0xa5eeba66, 0x861db29d, 0x5fe77a5c, 0x7a031ddf, 0x0ec1a775,
-	0xdf2a46e7, 0xbcc3d5ef, 0x791e981b, 0x83a6a74c, 0x9f55dfb3, 0x1962d273,
-	0x83dea8be, 0x3be09cfa, 0x4adf7e42, 0x5c81577c, 0x461c465f, 0x66b4ff48,
-	0xe1420cd5, 0x0eb2c2b7, 0x6be7d1f9, 0xbc1ea1a7, 0x7cb07892, 0x4fe18b59,
-	0x4561f2a1, 0xeabf3aab, 0x56fe7561, 0x67df3aaf, 0x2f0f2e7f, 0x32c7a7df,
-	0xd94b3e3a, 0xb03fe03e, 0x3d05e4c1, 0x98af5b48, 0x3ca4cbd7, 0x24f813b1,
-	0x4760fb95, 0x48e11758, 0x6ebebe04, 0xc5e2696f, 0xe7f57cec, 0x10de21af,
-	0x37a8237d, 0x6c6f12e4, 0x63cb7eff, 0xf4238415, 0xe071f0ab, 0x2cb671bc,
-	0xc6263afc, 0x10653d0a, 0x8bbe27f6, 0x45e3827e, 0xcfea3ce1, 0x8f98079b,
-	0x5d9fdb05, 0x1b9c7e19, 0xa9b1c6fa, 0x7db064e4, 0xfc6b931c, 0xa3e82d1c,
-	0x7e127cfe, 0x07a17917, 0x31a5db07, 0xd9a48afd, 0xf906454e, 0x8b63b094,
-	0x224270fd, 0x3bb464e6, 0xebcfcfdd, 0x5fb05cf6, 0x083d009f, 0x6514e3f6,
-	0x714e9f9f, 0x66c6f7d9, 0xf70687eb, 0x941d768b, 0x43f8ceae, 0x58b2eef8,
-	0x6b8e1c6b, 0x57187627, 0xdba2fbd0, 0xe8bb062b, 0x6778ff7c, 0x546ba279,
-	0x30f53f28, 0xe85189bf, 0x9c95165f, 0xbc391a25, 0xd42dfdac, 0x95bea8bb,
-	0xd3e74c0d, 0xbd23b7bd, 0x04ce24af, 0xbd9ef3a0, 0xff5c33c3, 0xf315fc86,
-	0x6259e599, 0x9ba79820, 0x2abfee98, 0x1d599f3e, 0x99d3ef4c, 0xc71c061d,
-	0x025b1441, 0x7cd9a51e, 0xd3d4f329, 0xf9be84fc, 0x908e9183, 0x12fe7cf1,
-	0x9df0a7b4, 0xd4b253c0, 0x36f30495, 0xbc74b8c1, 0x824de208, 0x5dac69b4,
-	0xe4a27481, 0x3079b3d4, 0x0d264f3c, 0x675f5069, 0x9d6ccbf6, 0xd0090674,
-	0x985e0fbe, 0xc6fcf2b7, 0x568bbdd9, 0x158b77c0, 0xcf9188f9, 0xe52c4763,
-	0x2fe46687, 0xc9b75866, 0xfd1cfbe2, 0x94f53c64, 0x3d8fb829, 0x3bda0943,
-	0x02369106, 0xe72c5ae3, 0x1b58b03c, 0x8f9049b1, 0xe0faf5b0, 0x66ce70fc,
-	0x2346e8f1, 0x0b19dc9f, 0x677a527c, 0xf285e025, 0x19ff6665, 0xc3ef5ca8,
-	0x73e0b773, 0x4d7e7c31, 0x1325cf9c, 0xe2588706, 0xb01ef1c0, 0x40419cae,
-	0x49d65984, 0xd44b7ed0, 0x25eff454, 0x7969e000, 0x8abd54ec, 0xd53bc56f,
-	0xeab9c4f9, 0x9d4bb27c, 0x3f93d337, 0xcf928be8, 0x16217499, 0xc02359cf,
-	0xfce062de, 0xebcf99a2, 0x3d74a408, 0xfd3e71ef, 0xbb13f58d, 0x8eeebcfa,
-	0xe3b41231, 0xd0cd9825, 0xde57d53f, 0xcafa658b, 0x97281e27, 0xf3cfc803,
-	0xc0f9b626, 0x837cd3ae, 0x7e8bbf64, 0x1b2ab66f, 0x3d5494f4, 0xc76624d3,
-	0xf54adbd1, 0x865b7cb4, 0xe689becd, 0x1d7ec1eb, 0xd5b7f30b, 0x49f68d3c,
-	0x0247ab13, 0xdc8fe0cd, 0x8366c9b6, 0x81e5717a, 0x8bd046c9, 0x76db1057,
-	0xbfbe8612, 0xce86fba2, 0x53c809f7, 0x5e9c48bc, 0xf3290f22, 0x7cbc0d71,
-	0xc59dfc07, 0xe18b13f2, 0x65feca5c, 0x3a75e475, 0x90e0eec0, 0x77d62e51,
-	0xa16ebde4, 0xcecd65e3, 0xb3bc3b43, 0x0973f99c, 0x3463f7df, 0x905c6afb,
-	0x8f3cb1ce, 0x707587e7, 0x899c6ebb, 0x746d6bf9, 0x36666288, 0x8c71fac0,
-	0xfc44edfe, 0x5af2fb63, 0xfd07fc12, 0x47fb0795, 0x5829343e, 0x7467dc1c,
-	0xbdb37ca8, 0x1bd696a9, 0x87edf7a3, 0xa78e3c7d, 0xa37d3c79, 0xbf9406f4,
-	0x628b3a9d, 0x6d7db1d4, 0x861302ce, 0x14b80653, 0x04d07edb, 0x7c904cfd,
-	0xbd4c6698, 0x5fa609bf, 0xd147edc5, 0x06ef4649, 0x12a68eba, 0x77b4678a,
-	0xd820f9fc, 0x4907e5a5, 0x88e9e001, 0x0739c841, 0x7a15d39e, 0x3a1afb1c,
-	0xfd406c98, 0x2a932ffc, 0xd5013bf0, 0xd2bbce8c, 0xbe2116c6, 0x755f2c0f,
-	0xe36a3f28, 0xb337e464, 0x6abf32a6, 0x57b35cfd, 0x10ce4092, 0xbbd277e6,
-	0xb10a6f32, 0xc43f0897, 0x773206fb, 0x44f39857, 0x4fd31c6d, 0x3b3066ab,
-	0xa346fd6f, 0x1d537fca, 0x335eecc7, 0x8c8f26e3, 0xfcc47943, 0x5c7179a7,
-	0x46411b6f, 0xe10a9f00, 0xaf504523, 0x81edf4ab, 0x9cba8cf8, 0x8e3999f3,
-	0xfdea0302, 0xbe08df9c, 0xf6c41cee, 0xd2423cf3, 0x9367ae81, 0x87ffe406,
-	0x7e456f4b, 0x18f11373, 0x951f6f00, 0x310278b1, 0xd55359ef, 0xa71cd27a,
-	0x5cf37f3a, 0xf0c51ead, 0xe79dc621, 0x09579752, 0x5aaa783d, 0xfff05e0f,
-	0xb9468abe, 0xdd54f89a, 0xe7e02185, 0xc000f660, 0xe873f30b, 0x1bdc6e91,
-	0xbebc3f99, 0x388def3d, 0x127767d8, 0x4976cfbe, 0xb2ffd1cb, 0x82115a4b,
-	0xaf5ad4ff, 0xb8647204, 0x987dd855, 0x7934e4de, 0xc3df83f7, 0x91128359,
-	0x49e3cebc, 0x493c400e, 0xadbe907e, 0x57165665, 0x30b51c41, 0xa45b349f,
-	0x16fef41d, 0x65da3e5d, 0x2aaca25b, 0x0da6fa3b, 0x13d4054a, 0x44c558f6,
-	0x6e9c6df2, 0xd7779dc2, 0xbafe31c5, 0x71766259, 0x9e333ccf, 0x9cb3e32b,
-	0xbc413f2a, 0x9d828e4c, 0x229c6470, 0x63fda3ea, 0x5c95c1b3, 0x44af5340,
-	0xd2171197, 0xd11b265e, 0x4fe1a8ae, 0xb476b1f1, 0xce0fc7eb, 0x9cfd3b41,
-	0x2fb43c8e, 0xfd844b12, 0xffd8292a, 0xf4dbd99c, 0xdf53a710, 0xdcbf4db1,
-	0x7bbba412, 0x8d5cb8e2, 0xaf409124, 0xe7ba767d, 0x7ba7684c, 0x5ffce75c,
-	0xa35acba0, 0x2171ed0f, 0x07df8af4, 0x38ab8b92, 0x9cca18bd, 0xf9d056f3,
-	0xb46bbcf5, 0x1d19f9c3, 0xe7ffb46d, 0x9da344f7, 0x50455f51, 0x652c6d3e,
-	0xec07a47c, 0x9f1d745f, 0xf9e35745, 0x8ad4a360, 0x663ba3f2, 0x6af1d232,
-	0x073c01cb, 0x74a56f57, 0x569f2218, 0x6be750ef, 0xdf9e2748, 0x47ee9f6b,
-	0x0517c8cf, 0x56ef761f, 0xd4c323b7, 0xcb8f377c, 0x7da77c8b, 0x7d4c0556,
-	0x9d8b3dae, 0x8641e9c3, 0x1de8a3ae, 0x2eefb723, 0x008a9db0, 0x7494fb56,
-	0xc7adfd31, 0xfb665a7a, 0x2283c99f, 0x6e568e3e, 0xedbd7115, 0xe0bfca3a,
-	0xb0f42afc, 0x07f2c222, 0x92721d74, 0x42df382e, 0x7fe84ede, 0x7c084e42,
-	0x52109695, 0xa743f742, 0xc9434fe0, 0xed37c050, 0x0489f71f, 0xd8314391,
-	0x7dce07bf, 0x9478f8e3, 0xb7203c1e, 0x17b33a3d, 0x6a59abe8, 0x06693940,
-	0x9ba69f3d, 0x83ca1724, 0x323daa97, 0x692c7bc0, 0xd6833598, 0x8cee6f1b,
-	0x3a513804, 0x3f4a1239, 0xb197c44d, 0x11d1524b, 0xbf457796, 0x848e961d,
-	0xc47df33c, 0x74e998f4, 0x054fd0c5, 0x7a687e38, 0xc8e76240, 0xeb1f9629,
-	0xbadbfda1, 0x53274869, 0xf30f5789, 0xf1a9b0ab, 0x9d49253f, 0xa3f4a69f,
-	0x70c38c0f, 0x1f4e7870, 0x08772ea1, 0xfcd4477e, 0x857c932e, 0xc1f9187a,
-	0x5d80efc1, 0x193d7221, 0xd50dfa01, 0x6a1f7144, 0xb8ebe0e9, 0xf26fdd6f,
-	0xbf185c75, 0x13b70f49, 0x2bfc4b5f, 0xd3fa969f, 0xeb1bf759, 0x7a10a4e5,
-	0x65e2fb14, 0x907f8b03, 0xa9fe655e, 0xe5193312, 0x642afa03, 0x3fb14576,
-	0x8cfa05ae, 0x315dd209, 0xcf119eff, 0x19086ce9, 0xa1367402, 0x5327c23d,
-	0xfef1e4bc, 0xcbba05ae, 0xe223ea0f, 0xd254d15c, 0xa532be8f, 0x705fd42c,
-	0xa47d09df, 0xd26b6a40, 0xb91f0267, 0x1be609a7, 0xe3434f42, 0x512f808b,
-	0xda7dc27a, 0xcbaace4f, 0xf026f435, 0x52e5f42e, 0x367480d2, 0xea60a75b,
-	0xf2855cab, 0x5b32dcb5, 0xacdfed0f, 0x0936f462, 0xea0b31e8, 0xdca5e9ab,
-	0xe96bceac, 0x0ba88e91, 0x9f4b571d, 0x10dbd103, 0x5f2137a0, 0x6f4d2f63,
-	0x75bfe3d3, 0x7f1e9b7a, 0xd2d37a11, 0xbb5fe099, 0xa0e56c22, 0x4b57d73f,
-	0xde0a0f28, 0xf904d61d, 0xa89975e1, 0xb68aef4f, 0xdf5d7ea3, 0x3b0bcac0,
-	0xbdc4321d, 0xe5e3ad64, 0xc872ce99, 0xe5a7afd7, 0x23a2ebb4, 0xd8662e2c,
-	0xef3cac9d, 0xadd786ae, 0x587867a0, 0x6f3f97fb, 0xb968a396, 0x2fb799b7,
-	0x7c872d6d, 0xff6b0b7d, 0x46a9f819, 0xb79a7c43, 0x7d5fbe09, 0x1d9da66f,
-	0x3efe99ab, 0x9777af91, 0xd8ebdcf4, 0x5bb595ae, 0x883cd075, 0xe99ff9e0,
-	0x75f1d7e5, 0xd6cadc4e, 0xfae27719, 0x8ba50aa9, 0xea0f0115, 0xb574a76f,
-	0x06dfc8c5, 0x4a973f38, 0x4e9069ad, 0x5217eca1, 0x22ded987, 0xcc7e650f,
-	0x7b8874ed, 0x45fd99e2, 0xce20fff8, 0x9f4432a0, 0xd99e27b8, 0x84bd4563,
-	0xa0018a18, 0xa8ac4787, 0xa4ff0b5f, 0x812221ef, 0x723587bc, 0xbfac243d,
-	0x03564a72, 0x865311ea, 0x5fa53f08, 0x9b8e94bf, 0xc98be177, 0x3f43ece1,
-	0xe69ee3e2, 0x7a7d1371, 0x075337b2, 0x880bb174, 0xf4800524, 0x7f41afde,
-	0x487e05db, 0xa43ca426, 0xf2caf004, 0xbd7fe35b, 0x853c65a9, 0xef41aeaf,
-	0x2196a101, 0xccc9dc61, 0x1c1be24e, 0x53fe7fd5, 0xc467c4f4, 0xff362638,
-	0x1e544d95, 0x7e31d123, 0x8fe38736, 0xe90abf8c, 0xd3c73677, 0x2a7f05cf,
-	0x9fc00520, 0xddbc70e6, 0x347aa664, 0x8356c3f2, 0x133c6f86, 0xcb6a720f,
-	0xbabbfa80, 0xaa57c35c, 0xb92bb8f9, 0x092b7ede, 0x4a727ea0, 0x7a7a62f2,
-	0x6bdbd30b, 0xbf50472c, 0xe98479e9, 0x8fc4b5ed, 0xbed68ffa, 0x9d53b359,
-	0xe7536baf, 0xf9d5dbeb, 0x8e0f1c9e, 0xaea5b3d3, 0xd58aec18, 0x768bbf0f,
-	0x5fc16aec, 0x42fe6abc, 0x5fc67115, 0xed06ba1e, 0x6f98df51, 0x6f4f4d3c,
-	0xd0b8aac5, 0xfa9c02df, 0xb22f35ec, 0x613714f8, 0xeb1e8276, 0x4e70f988,
-	0xa4791a25, 0x9c7927e5, 0x86fb089f, 0x84792fe0, 0x8e7a23c9, 0x8241d77d,
-	0xd7ab5c7c, 0xbd73c4f5, 0x84d39f97, 0xfa0793fe, 0x35d3d00f, 0x4164480d,
-	0xdb7f6439, 0x9fc88724, 0xc0668579, 0xee99be73, 0x6c978067, 0x545971c9,
-	0xca05f0f4, 0x7bcf8199, 0xbd0d72ea, 0x2dd6f388, 0x81665e9c, 0xff8e8527,
-	0xe781c97b, 0x32b7c3ba, 0x5963997a, 0xd1faf487, 0xe22f466a, 0xe7e577dc,
-	0x4dfc873c, 0x747d79ce, 0x5ef54112, 0x17491e9a, 0x8fe67ce7, 0x1d1897af,
-	0xf87d55d4, 0x82cfe818, 0x246e1c2f, 0x3e10faf1, 0x64cd34d1, 0x934a3b06,
-	0xaa839d81, 0xbc5c7fa6, 0x38cf8434, 0x13134a22, 0x88ee5940, 0x5d6cfb47,
-	0x669c7aa4, 0x7fbbf3a9, 0x4fd2f380, 0xd44ed123, 0x954130fb, 0x70eb77a4,
-	0x6b3edb8c, 0x31527e60, 0x7707559f, 0x7ec3f3ee, 0x08ebff5c, 0x359f953d,
-	0x5ac5f792, 0xe4c4b65a, 0x6a7186ca, 0xb3233e74, 0x5fa27663, 0xb03b8c57,
-	0xf283d65d, 0x931af8d5, 0x106901c3, 0xefd2e1c6, 0xb5fea1d9, 0x4f8c89d1,
-	0x2aeb11df, 0xca0f8848, 0xa43f614b, 0xc6a49652, 0xc126fd04, 0x376606f8,
-	0x5c710bf9, 0x6361be32, 0xb69e7d88, 0x568f1b0f, 0xf5f8c096, 0x61ce29f7,
-	0x1da307de, 0xd39f30e5, 0x9a7b8fdc, 0x474efdfb, 0xcce03f31, 0x752cfabe,
-	0xf734f4f1, 0x518e9e13, 0xbd4487fb, 0x8ecc09a5, 0x6cd1b272, 0xbf07a8de,
-	0x1c6f313a, 0x21ec4946, 0x93c60353, 0xea78602c, 0x6dbd13d9, 0xa5ff8853,
-	0xfbf4a12e, 0xd87f9f30, 0xba43379c, 0x31b8f5bc, 0x23df0ed4, 0x0f77f3b1,
-	0x089e97a7, 0xeb718a96, 0x0fbf2a12, 0xe799ec78, 0xe5f63c47, 0x13bc8ac7,
-	0xc099effb, 0xfe5f6bf8, 0xb84f2c3b, 0xf5d843dd, 0x69f7f207, 0xd0547bfd,
-	0x044073b0, 0xfd6bcfb3, 0x3f050bf3, 0x05f9fee3, 0xec2d1f9c, 0x45827e60,
-	0x4a9cd266, 0x247717cb, 0x946e73b2, 0x9fe55b27, 0x515e44f7, 0xcba0863c,
-	0x3ecef49e, 0x2123f67f, 0xee3aecfe, 0xeb13accf, 0xdf5eaddb, 0xbadf0903,
-	0x8481fb3f, 0x6d6cfe30, 0xa08bc3dc, 0xe20b0c47, 0xc18dad61, 0x2dae42ad,
-	0xef6f7b07, 0xe8718272, 0xd65adf6b, 0xb5e0f604, 0x2a0b003f, 0xa7d431f2,
-	0x079c38eb, 0x53bc575a, 0x9d951447, 0x4251107d, 0x8aec9fe6, 0x4351e551,
-	0x4d03890f, 0xb5514ead, 0xaa186f4f, 0xfd643faa, 0x4cf2aa35, 0x9f2abe4f,
-	0xaaad72d5, 0x65ad55fe, 0x87f0fcaa, 0xcfd557af, 0xa3074323, 0x0c90ecfd,
-	0xb57221b6, 0x3e554ab7, 0xaa2de772, 0x86919ff6, 0xbd69e3cd, 0x79fe42dd,
-	0x8aa39d1c, 0x39ce7183, 0xed554b6d, 0x62b6a49b, 0x9f46f01f, 0xbd6893e4,
-	0xcb5f1c15, 0x62ff993b, 0x556afb74, 0xd8a367ff, 0x5fad183d, 0xa32e7696,
-	0x912ed61e, 0x7efea447, 0xfb8eeada, 0xa8ee219b, 0xf296bfbf, 0x356eda4d,
-	0xfe80bf3d, 0x8e6fd5a6, 0x5d3f7026, 0x7461490a, 0x0b0ba5ad, 0x5bbd7fea,
-	0xe627b465, 0xc687ec91, 0xc40cbc23, 0x5fc7f4ab, 0xae76612f, 0x76ada7de,
-	0xf559ff88, 0x47a432d6, 0x2e9a9253, 0x5d351422, 0xd3508e44, 0xa6aed585,
-	0x6a25c183, 0x3dc2d03a, 0x0ba6a1da, 0x43ffa7e2, 0x2ae02de0, 0x553b1ee0,
-	0x785a374d, 0xda0093e7, 0xc95eddd9, 0xfc6123ee, 0x70dbede2, 0x1fd2975d,
-	0xf86a89f5, 0x34701c16, 0x2c6e1059, 0x61e84cbe, 0x68ffae26, 0xaf4213fd,
-	0x7ae44b89, 0xf847ef15, 0x0f259a17, 0xfe7d51ea, 0x865f12c2, 0xa7f4132f,
-	0x44ecc206, 0xf0c4a4ce, 0x3efc4676, 0xc0519d90, 0x2620f675, 0x03886b2f,
-	0x882be1ed, 0xc9ddf90b, 0x3ed15bca, 0x63f2cab4, 0xad9ebbf4, 0x35527a62,
-	0xbf9f22f1, 0xaa02b8e2, 0xfb109287, 0x528e16ab, 0x02b3e487, 0x20f2e1bf,
-	0x79087485, 0x1378c2e0, 0x62e6864a, 0xad471f95, 0x30df82e7, 0xbd097f84,
-	0xe0278c57, 0x189af829, 0xe41a44cf, 0x1a17d824, 0x6846473e, 0x3b6a48fd,
-	0xe0f3b08d, 0x22fe2160, 0x44265dad, 0xe9916e0f, 0xcc90f238, 0x57f14226,
-	0xdda07360, 0xce7488af, 0xe625ef87, 0xc2bd26b6, 0x935713ed, 0x80c4fb3e,
-	0xfe12eaf2, 0xc91e59e8, 0x7f6668ff, 0x6bf0b43f, 0xf89fe5d3, 0x5e3c6d03,
-	0x55ef1052, 0x078f0f2f, 0xa76fea7a, 0x857d1fb4, 0x02eb23f6, 0xc3f6a1b1,
-	0x9206fbbe, 0x1373d71f, 0x424ddc71, 0x693710f4, 0x133f3c9b, 0x4e54c4ec,
-	0xecca4146, 0xab5da458, 0x8ed1eb07, 0x012ba3ac, 0x2121afba, 0x60ccda7e,
-	0xfee5e639, 0x74371179, 0x42e27d29, 0x3fc78da2, 0xc22778b0, 0x5f38a0f9,
-	0x139e740e, 0xcf701471, 0x2221fc16, 0x9139a84e, 0x4973839f, 0xf74ff42e,
-	0xb444a6db, 0x29fdd01f, 0xbec7ee85, 0xef2c22b8, 0xeb351fb7, 0xb2147117,
-	0x42ed10b5, 0x7bd742cb, 0x7a10f019, 0x3ea86fcb, 0x1234f780, 0x0dd7a615,
-	0x0381f63a, 0x553b0b8a, 0x46f59e71, 0x7b01807a, 0x8e3c8bc1, 0xafad4daf,
-	0xe3c89b3f, 0xe739f893, 0x181af052, 0x4eee3c1f, 0xf532e3e0, 0x27771130,
-	0x7f42f8e0, 0xc151efb8, 0xd8bcefb5, 0xe13df707, 0x72e02ee0, 0x29f3a8ae,
-	0x3d6c97c0, 0xeef00092, 0x83ee7288, 0xfd47e9fa, 0x705d24a7, 0x1772155e,
-	0xb6f6cbc6, 0xcf3f78cb, 0x5bc5813d, 0xc8c8f7b9, 0x4c3bba1a, 0x6ead37e8,
-	0xc2f51d7f, 0x68ca46ae, 0xa6761ea9, 0xbfa90e91, 0x0340bd88, 0x47ce81ef,
-	0x681f3d62, 0x75e22fd6, 0x7f7f3ae8, 0x3efc3809, 0xe42a1c1c, 0x9ee18351,
-	0x919c5f57, 0x1551903e, 0x75da1f42, 0xb0f4e66c, 0x013cef56, 0x4cef1dfd,
-	0x55fd0cdb, 0x53071dc8, 0x24eb3e00, 0xd1357fbc, 0x26cbeec4, 0x2574fbf3,
-	0xdc3b06fe, 0xb34a4e37, 0xe1a9fde0, 0xe09d91df, 0xdd78fe17, 0x4f70316d,
-	0x5c3ff44c, 0x4efde1d2, 0xe4fb9e42, 0x57f0428e, 0xa26fb02e, 0x162685b9,
-	0xddf99197, 0xe5165f48, 0x891aaf23, 0x61a3f619, 0x6bde0368, 0x68cb4409,
-	0xc9938cb7, 0x313ba024, 0x561f716f, 0xfafb877c, 0x7c52ef70, 0x2814d89f,
-	0x0ed34b58, 0xdd620f4e, 0x0503cb13, 0xfc20960d, 0x16a65c45, 0x3c385b3e,
-	0x66c6f1dc, 0xcdbb17d0, 0x52c9fce2, 0x9f23d362, 0xfb666759, 0xe255d8e6,
-	0xc2b3edfc, 0xe11dd4b9, 0xf6063c18, 0x7932fbdf, 0xb17f2692, 0xe3470639,
-	0xc7d415fa, 0xbb58d9d7, 0xbf071e6e, 0x44b2a3ee, 0x6f8e5f88, 0xa66f1f0a,
-	0x5c73b124, 0x8beff72d, 0x1f7ab5ef, 0x42d58dc6, 0xf04176bc, 0x6bc695fb,
-	0x01fc788b, 0x27ad10e1, 0xef78d1fa, 0x7ab179dc, 0x0e4bfcaf, 0x3ebebe7b,
-	0x0fe22749, 0xcf4defd1, 0x0be3615b, 0xf9d8934b, 0xe807182a, 0x7dc37bc7,
-	0x4a7b85f1, 0xce45c913, 0x0ef3eefb, 0x889fdc55, 0x9f9f7737, 0xfd7e7184,
-	0x29fda5fa, 0xe15c6096, 0x92dff040, 0x86e5e6c8, 0xd082bf78, 0xdefb0aef,
-	0x8f1c4e37, 0xc147f3df, 0xbb45fd3e, 0x7feaf78c, 0x75374871, 0xd779987b,
-	0x5db83127, 0x7dc7af13, 0x1c47d233, 0x2f8cc2db, 0x35fb89ea, 0x76aa9ee2,
-	0xfccbbb7e, 0x10fe608b, 0xbc6e1c47, 0xc48e9ca5, 0x30c777bc, 0x99f7b87c,
-	0xed059ef0, 0x77bde317, 0xe257f8c7, 0xf1a9b0be, 0xd7b73b7c, 0x9fdebeec,
-	0xa6bcf781, 0x40c33b31, 0x728de0f4, 0xd8f504fd, 0x4a65699b, 0x06fac53f,
-	0xffb216c9, 0x410f452e, 0x7854ebb8, 0x23770fed, 0xfbf457e2, 0x4fbe61f9,
-	0xe702c389, 0xbe5c25b7, 0x8351d92d, 0x1f38affa, 0x8cb0fe7d, 0x139f17f1,
-	0xbcf927e6, 0xcff3c255, 0xeb211752, 0xf95a1f29, 0x88334164, 0x844925b9,
-	0xbec3175c, 0x46e909df, 0xf97c9fb5, 0x87ecfdbd, 0xaeae5424, 0x57280d20,
-	0xdd58fe56, 0xfbdc9aae, 0xb49fd067, 0xdce1fbfe, 0xb1d6272e, 0x479e8939,
-	0x2629ef40, 0xd61f20c5, 0x3185f93e, 0x1f78194a, 0x777ca69c, 0xaff81e98,
-	0x46aed319, 0x48bfa61b, 0x44963c72, 0xc927b7f1, 0x9ed20db5, 0xbdff59f7,
-	0x7e4cbdb5, 0xb9438d6c, 0x2efd64d5, 0x087975f2, 0xc0f7ebe3, 0x1e14093b,
-	0x97d31326, 0x720d7412, 0x5e2dea14, 0xf1e387a4, 0x6266aa6b, 0x74049ede,
-	0x29cbf71f, 0xefce3153, 0x800e9197, 0x4752a6f7, 0x3625d81e, 0x997bb255,
-	0xb3f31366, 0xf6317f7b, 0x0c837035, 0x0cbfbb6b, 0x8eb6c1ce, 0xf7b03efd,
-	0x7cfee8b4, 0x5a57e210, 0x8bf163ae, 0xfeff3a09, 0xe2f190d4, 0xe049bd23,
-	0x691f8f87, 0x388f38c4, 0x21af34b9, 0xcdca5e24, 0x9edbd171, 0x1ec27685,
-	0xb61bb083, 0xa8bde045, 0x8183a1da, 0x18435c8f, 0x1bdc459e, 0xdf5421cc,
-	0x8470a2ed, 0xbf914ba0, 0x19f24da6, 0x12fdf0a2, 0xded4e3f4, 0x0f984be5,
-	0x7ae7ea72, 0xf98983f4, 0x5c9abdc5, 0x212efe06, 0x364be69f, 0xfae34766,
-	0xfe223cfc, 0x5cd97f31, 0xb8f3274e, 0x923f3f1e, 0xb1297bc1, 0x5bbb4067,
-	0x474a24cc, 0xf2fcd4b7, 0x675c22b6, 0xf41a218d, 0x19f7e105, 0x6f08cf58,
-	0x653f72ff, 0xa58df765, 0x72743640, 0x62e7c286, 0xf9c030fb, 0xdd9b3bb2,
-	0x88c323bb, 0xee8cfc03, 0x81b7c37d, 0x8834c27d, 0x7f29aff9, 0xa3e49732,
-	0x73866d5e, 0x44afadd4, 0x2f22f8f0, 0xc8ec4fbf, 0xfa9cf883, 0x8c7cb4aa,
-	0xc01a3913, 0x0dba3777, 0xc7dc0cfe, 0x5448ef94, 0xf2da0e36, 0xb87a19fd,
-	0xf54299af, 0xd92f9a35, 0x0fcb2f72, 0xd1d4aff5, 0x4f2d92fc, 0xfdd3d0cd,
-	0x7fc6bee1, 0x5b35f20a, 0xbe7cb176, 0xf34ca57f, 0x655e5bcd, 0x4960e1f5,
-	0x2dc1ec09, 0x68786707, 0xb9a267ff, 0xf1fbb7bc, 0xe5fbb59e, 0x3b50bae1,
-	0xe332636b, 0x9db8675b, 0x59264cf8, 0x1ef0055c, 0xb2febe11, 0x5a0f1d64,
-	0xac54c569, 0x4927b457, 0xf325dbe1, 0xf7e56e71, 0x924627a3, 0xb7e60896,
-	0x3c5144f3, 0x8e18e81c, 0x93afc77e, 0x6e9e9862, 0x38fbe3f3, 0x4f011fa2,
-	0x77189fd1, 0xe067c835, 0xac789acb, 0x3f8664ec, 0x1c46ce3a, 0xdd839867,
-	0xcb4aae2b, 0xbc51fc03, 0xf4de39e9, 0x8dbbfcec, 0x1bf68fcd, 0xa0728b9d,
-	0x07f8ec00, 0x33f5a2be, 0xd2d6f383, 0x93324149, 0x3136b72f, 0x3a206b7f,
-	0x6269e90b, 0xa5677f24, 0x668ebd50, 0xe4c6870e, 0x466f7e68, 0xc2512bc0,
-	0x1c389a71, 0xcf78fcd3, 0x5dd74af2, 0x775a1ff1, 0xf01cbe08, 0xf681ca5e,
-	0xf5b3b7ab, 0xcd7bf0c4, 0xd4188cfe, 0xf557eef7, 0xa6836677, 0xb8c1097d,
-	0x164c7736, 0x8227bfb6, 0xd93bf198, 0x332ed7de, 0xa0ade997, 0x2c778acf,
-	0x123ae788, 0x7bec47ea, 0xc58da2af, 0x39d70667, 0xd3af90a3, 0x6369d7c6,
-	0xe8aaf4eb, 0x64091c95, 0xa7f6b6cc, 0xf7f83ee3, 0x9f2a37f5, 0xe7daa7f7,
-	0x7d83fae1, 0xd65e103d, 0xd6f93a73, 0xa9e622f0, 0x9c1f6781, 0xf013f335,
-	0xed8dfd84, 0x52e9a946, 0x5926b3cc, 0xfb35939c, 0x8e1bf33b, 0xd5daca57,
-	0xb9e2cedd, 0xeba6a289, 0x3a99ddba, 0xed102b88, 0x1027c16a, 0x3dffb41f,
-	0x89edcc9a, 0x806d2469, 0x93c7c4f8, 0x0ddac28b, 0x9cf6bbf1, 0xe2cd13d8,
-	0x8af6b5d5, 0x277b789e, 0x9cf4afdc, 0x8c0aef63, 0xc06fd8d3, 0x259cf4cf,
-	0x5f282ed8, 0x9c73f9d4, 0x3fb7f63f, 0x7e603205, 0xe7b2a685, 0x47d53b15,
-	0x7e431cb6, 0xecb8385d, 0x7f9a4cb6, 0xc88ff935, 0xcb530bcf, 0xfca4c8be,
-	0x9fb27f7c, 0x7d9647e5, 0x5bf21431, 0x44feacfc, 0xefc0f3c7, 0x633fc789,
-	0xaf507252, 0x41592d78, 0x3ae5c9b8, 0x02647402, 0xc7ae8625, 0xe309aaf4,
-	0x075c04f6, 0xba4d0b4a, 0x6ff77086, 0x07a3eedf, 0x812957e6, 0xf3b0153f,
-	0x5f803b71, 0xf403b2af, 0xdf7bb144, 0x8eff7b3d, 0x483e5df7, 0x1e027576,
-	0x16bb23ea, 0x5dfcd265, 0x1fa09f91, 0x3dd0724f, 0xc515f601, 0xf9d01646,
-	0x9c9b5d4a, 0xd5913fa0, 0xe11eb376, 0x745eedca, 0xfc28178d, 0xf3f7d95e,
-	0x61b2a5ef, 0xb18f309c, 0xefd40f9c, 0xe06ff2fb, 0x633fadf7, 0x7af983b1,
-	0xdb96c76c, 0xdb1aff40, 0x4c97f6f1, 0x39fbb30e, 0xc163de62, 0x97bf49ae,
-	0xfe709bb4, 0x5eae3b63, 0xfdc7f501, 0xe80b23b6, 0x5f31c264, 0x9e85b013,
-	0xaaa52fbd, 0xcf90e5ee, 0x39d71a2e, 0xc04ddfa0, 0x54aa53e3, 0xf478460d,
-	0x857c7832, 0xf1dd67f1, 0x68fd9b87, 0x7fdf54fc, 0xfa3afaa2, 0x20c97b91,
-	0xc433f83b, 0xbdad7a7d, 0x5d2568f4, 0x213efd1f, 0xa2106740, 0x6f3c4f4f,
-	0x98248ca6, 0xaad1252f, 0x5939b97c, 0x96c2bf55, 0x929f2aa9, 0x7caab574,
-	0xcaa7929a, 0x56311f4f, 0x7b06ff55, 0x637f2aa9, 0xfd5534c9, 0x2aa5474a,
-	0x536be79f, 0xd4382fd5, 0x423f2eae, 0xfe43c064, 0x90ebfb51, 0xa0749d16,
-	0x74f8b5d9, 0x8e90ebc3, 0x87030bfd, 0xed7c5ed6, 0xe1d7b6f9, 0x6b17b0bb,
-	0xfb0933ef, 0xc5b2cdf1, 0x276f0c6b, 0x0567d24e, 0x75901fdf, 0x18d33eec,
-	0x94eaebab, 0xa67de0a2, 0xa62f6089, 0x7c58a848, 0x00e347ee, 0x3d980b4f,
-	0x062028ed, 0x68adbee3, 0x686a3c87, 0x2c0fe678, 0xf81d200e, 0x5cc084de,
-	0x9e27bad5, 0x5dd6a977, 0xe0d56e4a, 0x5f2a8d69, 0x555dbb61, 0x06d24a7f,
-	0xe534f955, 0xdd3c1a07, 0x60dfcaaf, 0xd3c1a2df, 0x7e9e0d36, 0xf4172aae,
-	0x5aedc1dd, 0x451ec0fb, 0xcefef1d3, 0x75c3c072, 0x8f8803a7, 0x72d6ce92,
-	0x47b5d3c0, 0x855f10db, 0xb039673e, 0x0d43e2cb, 0xa3ea43af, 0xf76831e7,
-	0xa612635a, 0xb4151a07, 0x1c6c1d6b, 0x46a1e981, 0x75ff7e3b, 0xefa60963,
-	0x7d303a34, 0xa62a71af, 0x4c4e8d9d, 0xb0db1adb, 0xed8d73fe, 0xdb162ecc,
-	0x3a45def7, 0x75ba07d8, 0x8278377e, 0x77923f17, 0xeecbf003, 0xc86efe41,
-	0x37ec45df, 0x25f9a24c, 0xbee844c0, 0x374f29fc, 0x80023aa4, 0xca1c3757,
-	0x18f1828a, 0x1e473a6d, 0xa477e1e8, 0x3ea1f84c, 0x37bb909d, 0xd16c9338,
-	0x79a66f2c, 0xb3c63644, 0x83a1f84d, 0x2033d712, 0x33a9d04a, 0xf7c806e1,
-	0x7772b044, 0x401b84ca, 0xfec6ff0f, 0xff3f4773, 0x61291df9, 0x9ccfe7fc,
-	0xd760ac56, 0x70d5fc39, 0x30e3c02b, 0x48396fb7, 0x4d09619e, 0x0679f54b,
-	0x0747b390, 0x80f0b7b8, 0xe009b4ae, 0xcfb3a6d0, 0xebef78c1, 0xb7e8040d,
-	0x5fe7624a, 0xca95cf51, 0x0dcf41e4, 0x1d4f3c26, 0x605639d1, 0x7814995c,
-	0x3dbce00c, 0xdee112a5, 0x00640d63, 0x4e29bcfc, 0x3c0f8f96, 0xf243d926,
-	0x079f0606, 0xb6fc6e52, 0x3858f3e1, 0x62913cf8, 0xcfb6fa63, 0x807a0e91,
-	0x74a91fc8, 0x3e7ec1d4, 0x0ab8ea52, 0x4d38cfef, 0xad3aff6c, 0x3ed0abde,
-	0x139a28e4, 0x9219e762, 0xd1f7606a, 0xd82262e1, 0x71916f3b, 0x39e16b9f,
-	0x7be99521, 0xce702748, 0xe789179c, 0xf63a2382, 0xfeb6819e, 0xb3d70e02,
-	0xe3dbc283, 0xbd32a616, 0xdd566ca2, 0xfed02f33, 0x6045d67a, 0xe1ce3dd7,
-	0x34f58fa8, 0x342ae850, 0x8e70dd3d, 0x1cec9b95, 0x9dbfe824, 0xf2d17f0f,
-	0xfb6e3a67, 0xfd68efeb, 0xda45d64f, 0xaed88651, 0xc2ddf841, 0x358c2f2b,
-	0xb0b4fea3, 0xe40cbd2a, 0x07ee7ce2, 0x27d5645c, 0x1f503ba0, 0x1727846d,
-	0x9af25b97, 0xcac90429, 0x3c234ab8, 0xb69d5525, 0xd5d219a6, 0xc237eec3,
-	0xa3b52913, 0x1a833576, 0x70b7475b, 0xff3ff211, 0x5e748dbb, 0x0acbd78b,
-	0xfb89cf3b, 0x145735ae, 0xf7e822cf, 0xa23b8f08, 0xeaf3c040, 0xd16f0e22,
-	0xd787116e, 0x3fae1489, 0x0b9c90e6, 0x67d63f6a, 0x0b5def40, 0xc01ecddf,
-	0xe72ea0cf, 0x4607e3fa, 0xfdf6ae36, 0xe2ee3112, 0x3afe7654, 0x0994a462,
-	0x4c2de4fa, 0xfdcee40e, 0xba22aee2, 0x9b0edcfe, 0x1615e30e, 0x7800bdd7,
-	0x78e76de8, 0xd8769034, 0x4b3cb34f, 0x221df93e, 0x8f754e26, 0xd2f252f7,
-	0x0f2b69de, 0x7e859795, 0xbca87967, 0x96b4092c, 0xf2145c83, 0x7d4ff851,
-	0x2f9cd58d, 0x3d3f2037, 0xf31eb8d0, 0x983d1b07, 0xe16c6a1e, 0xcb15b97c,
-	0x987c69df, 0xe72f65f3, 0x7bf13bcb, 0x4c5ce347, 0x58ba35f7, 0x9519ca3e,
-	0xecc4fb0a, 0x37c4f8c2, 0xf80898b6, 0x4c3b7ae7, 0x77419f18, 0xc68f63c4,
-	0x0991fc41, 0xe36a71ef, 0xbe7cb490, 0xf7761e8f, 0x0525377b, 0x1f8be9c6,
-	0xc8717d02, 0x9874f4c0, 0x4be05628, 0xe4fe8ff9, 0x0fafd006, 0xf4158a2b,
-	0xcdd482e9, 0xac50ef2c, 0x7c2f9a06, 0x8a5de794, 0x22ac04d5, 0x5be421f5,
-	0x358a3d87, 0x1f8be682, 0x7b95887d, 0xc7f33a09, 0x06f5ba3d, 0x2259f00f,
-	0x51fd801d, 0x449cce6e, 0xd79505c5, 0x5f6007a5, 0x325a494c, 0xcec5f609,
-	0x63e90514, 0x00e1b29a, 0xd88fa7e4, 0xfaab87a6, 0x46de4b0e, 0x57165768,
-	0x937687a9, 0x846cd6d2, 0xdd879376, 0x376d0faf, 0x8daed475, 0xdf619f90,
-	0x74fd07a6, 0xf8b1f027, 0x2f223f60, 0x169f05ca, 0x3ba37271, 0x720f289c,
-	0x0f289ddb, 0x66ca5c04, 0xf60dde57, 0xc976facf, 0x663cc126, 0x0a417d4b,
-	0x86e89310, 0xbf2949f7, 0x97f53ebe, 0x5db40dd6, 0xc5afe43d, 0x7c370ffc,
-	0xa6fbfcbb, 0xfbfc30d4, 0x41dfbe43, 0xfbdc43de, 0x0ef64687, 0x2e1c33cc,
-	0xac4b1df5, 0x712a8ef8, 0x7acf4159, 0x97f3cb9e, 0x9fe5a520, 0x7f8bb4f1,
-	0x70e7407f, 0x52ab38c1, 0x3fb21fb9, 0x6549a87f, 0x8f735ffb, 0xce728064,
-	0x6d52ea1f, 0xea3cf7aa, 0x76bfbb08, 0x6d3b38a9, 0xee36b89c, 0x3b693564,
-	0x1fecc8e8, 0xf70b526f, 0xc7fab2dc, 0x6a788b7f, 0xdf781c6d, 0xe3106ab9,
-	0xd78173a7, 0x496eba50, 0xde4f901d, 0xdc38097b, 0xfd0e0e1b, 0x9c5843d6,
-	0x2438bf7b, 0x5daeef1e, 0xb3c57117, 0xfc798d77, 0x827d76bb, 0xafaffa2e,
-	0xcf5fc195, 0xbbf54fe0, 0x157e60c7, 0xec04ad8b, 0xe7fca156, 0x3fe11777,
-	0x6df67e5a, 0x179bc9f1, 0x65bbe1d7, 0xf3d8f861, 0xb898f8e1, 0x854dafcf,
-	0xf3f70a9e, 0xde121e20, 0x7e738239, 0x1f6ba265, 0x1653d3f4, 0xce0e9bf8,
-	0xddec71a1, 0xaed183f0, 0x325df0fd, 0x1106b8b2, 0xe75a7c97, 0x6de815f9,
-	0x19fa3def, 0x106eb3f2, 0xbc8f7416, 0x97a0f341, 0x7ce6c3fd, 0x4647e013,
-	0xefa18df8, 0x7f140f8f, 0xff2e1bfb, 0xdf6ca7fa, 0x9ed43889, 0xa0665f6d,
-	0xfb12eefd, 0x54782062, 0x70fde3c8, 0x24b7a43f, 0x9767e512, 0xdef07c44,
-	0x02695771, 0xe95d2dea, 0xdfa43d46, 0x2bb8b9f6, 0xd7fb1b3d, 0x92bb8f9e,
-	0xdc6ccc4b, 0x7d2153c9, 0x2154f92f, 0xf0dfbdc8, 0xa376cbf8, 0xb03de0a7,
-	0x408d8f0f, 0x928dfeff, 0xa0e010bf, 0xbd77573d, 0xc94ca0b5, 0xa6be7fed,
-	0xeb049beb, 0xbbae3dab, 0xe95dbe1b, 0xfd76bb79, 0xb9c408df, 0x15ff5b8f,
-	0xaeeff781, 0x19ddfcfc, 0x5e80ab93, 0x12026ae1, 0xf545d319, 0x54bf9a09,
-	0x8939d6fc, 0x4333d39e, 0x6f25e5ce, 0x9e2e38b3, 0xfde7cf6a, 0xed5c09de,
-	0x960dc751, 0x5e308afa, 0xe147f645, 0x7b1d60bd, 0x73c4436f, 0xf3cfc9bd,
-	0x243ebcf4, 0x9d70ed0d, 0xfaf3aa19, 0xfa2d1f1d, 0x0881f21e, 0xa678ef8c,
-	0xcc3c44fd, 0xf19d8ff5, 0x0945793f, 0xedbd77d2, 0x9df4246f, 0xbdf5dac0,
-	0x86d77caa, 0x7056fbe0, 0x5ff6ab1f, 0x2a25ca32, 0x4f105ac7, 0xdae335e4,
-	0xda4af910, 0xef07dcfe, 0x55df94d1, 0xbe50c002, 0xd074cf36, 0x3cfc9576,
-	0x8de44844, 0x92aeda0e, 0x67891f9f, 0xe78f2b25, 0xb09f3df5, 0xff28ba7c,
-	0x7fac4ce3, 0x1c6fe895, 0x79164f2b, 0x22d5dfde, 0x9623789f, 0x25f68a67,
-	0xc6239f2c, 0xaded64af, 0xade4feac, 0x7a099cff, 0x33f7e08d, 0xe09cb8d2,
-	0xfe5152ef, 0xba2b4cef, 0xba8ebc68, 0xf107cb9c, 0x1dc5550e, 0x85df22d3,
-	0x6126dc7d, 0x9ded61ec, 0x9fe7b406, 0x0dcb698d, 0xe22f2fbd, 0x56e59c7a,
-	0x7baaf38c, 0x9976f871, 0x1e813bc7, 0xe9fb9cb3, 0xfa0b642b, 0x65ef7a61,
-	0x3d207e7c, 0x97fae570, 0x57ecf855, 0x46d3dfce, 0xef1d2547, 0xf1130fdc,
-	0xd619027e, 0xee02f189, 0x27c44934, 0x116abde0, 0x45971757, 0x8e7e701c,
-	0xbd82297b, 0x13b27aa7, 0x97caeff9, 0x6ebb7d98, 0xef28ebcb, 0xda0aca96,
-	0xea1ebe97, 0xe9f0075a, 0x2f77b2b6, 0x87dfae57, 0xc531f4fb, 0x8160fdc6,
-	0xbcf0a151, 0x3dfc3fb3, 0x8517f169, 0x3ffcbabf, 0x5dad7f0c, 0x5fd7dc5d,
-	0x7ff1857d, 0x07e656dd, 0xfd3c73b6, 0x7314a749, 0xf0023d78, 0x33a2b73a,
-	0x20865a3b, 0x778c4eee, 0x29df90ab, 0x6f56f382, 0xde009583, 0xdccea5bb,
-	0x5fe0c30f, 0x9f38ae7b, 0x69715441, 0xf7c3fb3b, 0xf7d04be9, 0xfa4dffd3,
-	0x8dfbd44e, 0x1f1bf076, 0x15e5ef65, 0x18c9fe77, 0x4ef41f1a, 0x0f073b1a,
-	0x317e676e, 0x2c171711, 0x713c32b7, 0xd55d53ff, 0xffc1e33b, 0xc4c3f624,
-	0xfe06d248, 0x76d74a04, 0xa076d74e, 0x41bf416b, 0x176d143f, 0xfa41be06,
-	0x912e2c25, 0xfdb7e9c3, 0x25e1fae1, 0x7fe1fae0, 0xa9bbae13, 0xdbfe8c3e,
-	0x4ed02217, 0x3ff385a3, 0xbc055c38, 0x0e2fd323, 0xfff4c8e7, 0xd3239c0c,
-	0x439d9515, 0xf9207bc0, 0x988fc5a4, 0x5a7d9877, 0xe9f64df4, 0x4f9c1923,
-	0x8f18fde9, 0x4c7bc5ab, 0x27bc3f7a, 0xef1c5fa4, 0x30fff2ea, 0xd370b5de,
-	0x9fdcb5a6, 0x985efdab, 0xfbbf203e, 0x7ff8e056, 0xb0b04fcd, 0x7caabf61,
-	0x54b7faf1, 0xef3c4be5, 0x415f965f, 0x5bfffbd8, 0x57e105fe, 0x2afcf998,
-	0xb51ff81d, 0xc43741f2, 0xc7a023f9, 0x7afe5f1b, 0xf93087d4, 0xb78c6cea,
-	0xe5af8dba, 0xff7ff18b, 0xbe947be4, 0xf66068be, 0x3ffb63d6, 0xfd392837,
-	0x79e165e9, 0xd084711d, 0xeff5c2d9, 0x5acf401b, 0x54fbd848, 0xa60ffada,
-	0xc6307b33, 0x30be5149, 0x710c4cd7, 0x9dcc1f94, 0xcf4beecb, 0x0c630705,
-	0x2d173ea6, 0x3e27a99f, 0xd2bb8f78, 0xd099f7a2, 0xffbea9ef, 0x75efe26e,
-	0xd558b893, 0x21d9783d, 0x9cdf9c63, 0xbd2fe612, 0xf786d2c5, 0xba1de787,
-	0x60f7dceb, 0x14f46f2f, 0x7177b8b1, 0xbaf7f0ff, 0x3e83f12b, 0x9c2a7a08,
-	0x5fee24fb, 0xff40635f, 0x2addb6ba, 0xca669fbe, 0xd9a38b12, 0xc533e2c3,
-	0x3beba4fe, 0xf767ca64, 0x48f7e060, 0xbe0c1b2a, 0x67a0b9e1, 0xbb3d47ef,
-	0x2e4364be, 0x927eafe0, 0x1b94dc74, 0xafd4ef3c, 0xd7b60bff, 0x7a6d67f2,
-	0x4fd5f6b9, 0xbd210f1a, 0xb1d17388, 0xb5e61f46, 0x1305d6f6, 0x93fd17ff,
-	0x6de2ff63, 0x57dc7482, 0xd0c70f8e, 0x3b1bfb75, 0x827b2dff, 0xbb0823b0,
-	0x214ed682, 0xbf7888f8, 0xe36e97d2, 0xa296b2ef, 0x59e883df, 0xc1edf82a,
-	0xd7f9fcfe, 0x27d717e9, 0x61ffe5d5, 0xf4b97cfe, 0xe4c49b5f, 0x8fee96aa,
-	0xed0cfd56, 0xb5be82cf, 0x6200bff4, 0x0bf8e852, 0x27bc25ea, 0xab55773e,
-	0xcdf49c61, 0xe5b57de9, 0x9b830664, 0xb15c2e46, 0x3c78503c, 0x0be78c87,
-	0x0ec6bc93, 0x87810f76, 0xefd5d3af, 0x48bc5303, 0xab971719, 0xfafff2ea,
-	0xa2e4e039, 0x8917266f, 0xcb489f4a, 0xe56eb7e8, 0xfe56eb12, 0xb90eeb9b,
-	0xd648b4a7, 0x40e3ef05, 0x81c435fc, 0xfdd978f6, 0x56ccead4, 0x5203ddfc,
-	0x7e028812, 0x995eeb77, 0xde8e9efd, 0x790e4fa1, 0xf88bad3f, 0x5c7a003e,
-	0x3bbd9e35, 0x769b8da4, 0xd5ea78f3, 0xbf78dd96, 0x9a0efb51, 0xf376cb88,
-	0xa1efb4fe, 0x9de2f689, 0x687bed03, 0x1c783253, 0x67c93e76, 0xe7172971,
-	0xcf20dda3, 0xdd35fc43, 0x5da2355f, 0x4ac7c6e1, 0x05a4f3ee, 0xa32732f1,
-	0x9799df1f, 0xa3be7171, 0xd32fff2e, 0x81dd6caf, 0x94aed8f7, 0x3a64477e,
-	0x827f40dc, 0x9bf1f72f, 0x6fc84c57, 0x3df33bc4, 0xf7c19e6b, 0x24be7a87,
-	0xd4bd97e8, 0xbb13e33b, 0x09c435d8, 0x564dbd27, 0xc771d78a, 0x1baf683c,
-	0xf785c47b, 0xe3bcc776, 0x927f8880, 0xc329c077, 0x233e85bc, 0xff209bf4,
-	0x78d9f7e2, 0xf2e5d59c, 0x37f52bb9, 0x8cfca7fe, 0xb75d5ee2, 0xbf0457c1,
-	0x13d9e0e7, 0xa103bf81, 0x1993ff9d, 0x93be8bba, 0x7ae511dc, 0x8b34f012,
-	0x5ef109cb, 0xdecc8572, 0x94edef49, 0xeeb85ed1, 0xabfb7e7f, 0xdb4b9547,
-	0xbd6dea15, 0x2265cf61, 0x7bb1d7ad, 0x0ae5f92d, 0x79c249c6, 0xc287ec0d,
-	0x7fada89e, 0x297b294a, 0xe35bed03, 0xdeda3df1, 0x067cd987, 0xfafd57c2,
-	0x603f8e00, 0x7ebf1f39, 0xf42d916f, 0x19f3959d, 0xdb43e77d, 0xdf107329,
-	0xff174b97, 0x332dced7, 0xa891e265, 0xbc91cd7c, 0x4c25ef4c, 0x3a405dff,
-	0x02445d31, 0xbb08ba98, 0xd894b0cf, 0x9c4e5d31, 0x5c55ae98, 0x3718195d,
-	0xf8c04814, 0x39ff17d3, 0xdce6e80a, 0x215ae375, 0xf2dbf146, 0xbef56923,
-	0xbd853c9e, 0x3fc2f497, 0xd9f4077f, 0xcb863ff3, 0xa2471be2, 0x1848641c,
-	0xa57bd33f, 0x54d7bb32, 0x17dc5df2, 0x325dfde2, 0x96e1f989, 0xfee26627,
-	0xc4cdf209, 0x826f826d, 0xb8e7393f, 0xdcc3c58e, 0xc67be12a, 0x6e1d7eed,
-	0x99159cb1, 0xb9ddf85e, 0x3cacddf6, 0x2bda2ea7, 0xd8ce7cd1, 0x26be5608,
-	0x4ff70bda, 0xee3f1216, 0xfb70c5cb, 0x4bfb8644, 0xdf8a2f8c, 0x8227a00b,
-	0xbf6d12a1, 0xeeccc3a2, 0x30ff1051, 0x70b9ffe0, 0x4f170a7e, 0xf1f18433,
-	0xbf1943d1, 0xb6a65d1f, 0xe5e50c87, 0xdf6529f7, 0x0cb47807, 0x810d6471,
-	0x9b9d31fa, 0x3b042c1e, 0x9f808e90, 0xb7b1b3e6, 0xb4535fa3, 0x1b29517b,
-	0x959ff501, 0x67bfbc58, 0x4c6fbf2f, 0xfea10902, 0x794ab5b1, 0x1a2bd42e,
-	0x40d3f8c2, 0x51df8570, 0x2f398674, 0xd1d1f88a, 0xbb436670, 0xd277c13c,
-	0x7e58959e, 0x6f5be3f2, 0x5f4168dc, 0xe3f40782, 0x44d71517, 0x91b46f18,
-	0xffcc0b10, 0x1b7efca7, 0xbb00c869, 0x4cc7aae8, 0x3e2fd03a, 0xee18e2a2,
-	0x9e81fcf7, 0x98fd21b7, 0xfd219b9e, 0x43373d23, 0x9b9e9c7a, 0xcf413d21,
-	0x38ae90cd, 0xccc7876f, 0x8e2189c9, 0xf0bfd0b9, 0x5be769f7, 0xd7f18439,
-	0x1af7f1be, 0x14fbfc71, 0x0fb7c217, 0xfe087bdf, 0xd1b3edde, 0x8b989481,
-	0xdecf5bd0, 0x749fa3bf, 0xff08b820, 0x0a7cb6a3, 0x6eee6bc7, 0xdcffca3d,
-	0xcad47f76, 0x872b7a90, 0xce7db118, 0xa0a3270b, 0x1f5b6eff, 0x5d121d7c,
-	0xcb1d4cf2, 0xb9fc7caf, 0x828e371b, 0x0fbe3bf9, 0xf9f74174, 0xdb73486a,
-	0xfc00fb7f, 0x1fed2a5e, 0xa47a24e3, 0x2f3c66c0, 0x85a1d668, 0xb3d75883,
-	0xa09b9dd1, 0x0c2fb3fd, 0xbe509585, 0x01bed843, 0xadc2923a, 0xe7ae0377,
-	0x10a05346, 0x78dd0bee, 0xa71b0e41, 0x8a529f7d, 0x7a064e70, 0xcaddfe43,
-	0x025f4653, 0x7f74df6f, 0xe223fb6b, 0xa5e015fd, 0xafa5c80a, 0xac2f40a2,
-	0xed04f1e4, 0x06fd87bb, 0x2439e9d6, 0xdabdf813, 0xfdea31d1, 0x49e38bb7,
-	0x8d7b39a4, 0xb3d7c04e, 0x830d4f7b, 0x7e2989f7, 0xc57bc186, 0x455c86db,
-	0x31ef7f42, 0x8f97ec67, 0xf587183c, 0xe769f7f1, 0x10156d91, 0xbcdf3337,
-	0xd2580dff, 0x0af1db42, 0x9c599b88, 0x74841d24, 0x19399289, 0x7dc465e2,
-	0x4a236583, 0x9a96c20f, 0x7d44af61, 0x4c9814ae, 0x37287c88, 0xd847f247,
-	0x558a3c85, 0xa524a7e5, 0x534feaaa, 0xd3e554b2, 0x95548c47, 0xd867718b,
-	0x46f5540b, 0xc28604c7, 0x83ae8e79, 0xa4ff03bd, 0x3986f18c, 0x7eb91c2f,
-	0x7ccfcd24, 0x43be0e6a, 0x9f2f2cf9, 0x17b95cf9, 0xe143d1f0, 0xd50aa469,
-	0x6c1f92e9, 0xd33a107e, 0xf76a179c, 0xa1d0713e, 0xe179c65c, 0x8184e712,
-	0xed164fde, 0xca04e7b5, 0xbe001f37, 0xd9c5fa39, 0x3edbf036, 0x14cbf63b,
-	0xcdfd4788, 0x0caefe10, 0x440c3f3f, 0x43fb7d37, 0xbcdd1852, 0xc3279325,
-	0xf2440dd0, 0xe9643a32, 0x7eecc3cc, 0xb5f295de, 0xa1af814f, 0x4243c0bd,
-	0x6b577f7f, 0xb46d1bdf, 0xb036e6ff, 0xc32bbd47, 0x7bbea50d, 0x6fe12b93,
-	0x64ef4839, 0x93bbb6f9, 0x07bbf0e3, 0xb73761f4, 0xb8520df7, 0xffbb553e,
-	0x60c2e4ee, 0x5c775939, 0x29dc9f55, 0x1bf2ab35, 0x7bf9d533, 0xdb439b4b,
-	0xad8fa40f, 0xd189787c, 0x6ef70395, 0x37bfb0a5, 0xfff3e62c, 0xd5800901,
-	0x00800020, 0x00000000, 0x00088b1f, 0x00000000, 0x19b5ff00, 0x6554540b,
-	0xcef7bbfa, 0x7860190b, 0x77421028, 0x840a4498, 0xb0285789, 0xd71ea08d,
-	0x8f4c1ada, 0xe5935654, 0xe04d7903, 0xe3d8f4b6, 0xb68fad18, 0x695b6d07,
-	0x9656356b, 0xb139e4e7, 0x36254644, 0xeb495bae, 0x66a254d6, 0x42d899e4,
-	0x7a26704c, 0xf75a9d6d, 0x5efffefb, 0x5b602e67, 0xe74ed69d, 0xffffef9f,
-	0x27ef7ffb, 0x70ca1490, 0xf60800ce, 0x9970ccac, 0xd6f70601, 0x8018e41a,
-	0xe2eff4d3, 0xf9b8daf0, 0xcf03837a, 0x3a380057, 0x01cfe3cc, 0x031401d6,
-	0x7b81295c, 0x5914f3a2, 0xff60e760, 0x2fbdf165, 0x00490801, 0xde8d179e,
-	0xe38456ed, 0x6e67065c, 0xf08d9ef8, 0xd918064e, 0xbfefff72, 0x25f5c22a,
-	0x8c0ee3b0, 0xbd0d43c4, 0x5c75d79b, 0x9fcd7114, 0x77d1d704, 0x98809679,
-	0x55706b80, 0x00e207b4, 0x3c636a9a, 0x679e3e62, 0x2e990e86, 0xa6f1c804,
-	0x01529bb5, 0xc0228a8e, 0x78074439, 0xe3ef14a0, 0x245f041b, 0xa4ef39a7,
-	0x67c8b9df, 0xe7c72fcc, 0x35b03245, 0xe99432bf, 0x7ed77bc6, 0xbf1ce787,
-	0xce91a203, 0x8f4a803f, 0x2e5c4c03, 0x19bdbb04, 0x3f233ffe, 0x1812bd4d,
-	0xf0619f90, 0x605aba1d, 0x25a9ccd7, 0xa7e92b00, 0x061dfb4c, 0x196fd890,
-	0xb2957f70, 0xe57cb2bf, 0xf08b10a5, 0x2040fd56, 0xa70fbd9b, 0x7fd5fff1,
-	0xf198376f, 0xda53f57c, 0x530f427d, 0xfbe52f90, 0x77b3f03a, 0x3de277eb,
-	0x235ef853, 0x8499fddc, 0x697636ef, 0xc7245fbf, 0xe0e60d24, 0x3828028f,
-	0x916db12d, 0xf1366bde, 0xdf4ae6f7, 0xea097bbd, 0xc925e9b1, 0xd1adc46e,
-	0x00e2d3dd, 0xa83983f9, 0xf2f1d4e4, 0x7a8cda6b, 0xa7c30c2a, 0xbdf34b76,
-	0xca175f74, 0x5e319ea8, 0xe2c960ce, 0x5f1c2cf8, 0x0bd7c573, 0xf735f101,
-	0x7ed0d0e8, 0x1146cf00, 0xcf3c08e4, 0xf2ae31ed, 0x07f4c39a, 0xfcc79c2d,
-	0x66132f9e, 0x1d75f2e7, 0x1ced01d1, 0x98bf702f, 0x093e8021, 0x60b541f1,
-	0x5f4b8edf, 0xc925724f, 0x9f004fbf, 0x589ec05c, 0x5cfd4264, 0x7da39fc1,
-	0x8fe02433, 0xe11d6c94, 0xfdc8a859, 0x7c7fd28a, 0x8b77e023, 0x434f167b,
-	0xd750e00a, 0x0cd43eb2, 0x0c6d906c, 0xe8f012df, 0xf17d2f49, 0xa416f4ce,
-	0x604932f3, 0x1f17dff6, 0x7f10161a, 0xd0b4455f, 0xeff7b026, 0xbe55f7a4,
-	0x74cef4fa, 0x8e6be337, 0x26f51065, 0x4e902e38, 0x47978f47, 0x183aae58,
-	0x712bf554, 0x9c7f2177, 0xfb3edd2b, 0xd1dbf412, 0x223160a5, 0x684b97bd,
-	0xabc30838, 0x49ab8fdc, 0xae5133d6, 0xe8813f82, 0x6e17966c, 0xe4bbf191,
-	0x97417bd6, 0x1d372118, 0x2f5533f7, 0xd3c71caa, 0xf72de2a1, 0xd1bf903b,
-	0x9fb3021d, 0xecccbb46, 0xe4fcb1b3, 0x7f104b83, 0x0bb25fa3, 0xeeb2cf48,
-	0x7e4847bd, 0x403b6b1d, 0xe7401e77, 0x2eb66eda, 0x527d9933, 0xd98be31e,
-	0x414688ad, 0x6056ad7c, 0x7c35a7c6, 0x0c7be61e, 0x7c3f51bc, 0x3804ce06,
-	0x9e7ceb18, 0xfbf35bf8, 0x1096fbcf, 0xe3ca1bb5, 0xad901f99, 0x3fa61b9d,
-	0x466000df, 0xa3db43fa, 0x3c304fbd, 0x6125af68, 0x27b13d7b, 0x9e0b70eb,
-	0xcf53789f, 0xc55f75cc, 0x416ea7c3, 0x68f6cd78, 0x0913e726, 0xf3a549e0,
-	0x3d7ba627, 0x18a56178, 0xb9216fea, 0xb7d8c677, 0x47f1f9e3, 0x13bb3fa7,
-	0xa767dae1, 0xf24c89d9, 0x7de5191f, 0xda011d3c, 0x7d953e7f, 0xef1c2907,
-	0xa52fc50a, 0x57dc6667, 0x24cfe74e, 0xaa8f09da, 0xa347a1bf, 0xfaf2801c,
-	0x16797c12, 0x8293bd34, 0x87c45067, 0xc79dc4eb, 0xdbcbb404, 0xc483ae0c,
-	0xfe47eaf7, 0xf90ca87a, 0x37e67aa9, 0xfa44cf0f, 0x0c9bdf6a, 0xaf584ef4,
-	0x6c40e2e3, 0xdffc9720, 0x915ffdc6, 0x288edd4f, 0x7111c7cb, 0x5e23a1a6,
-	0xa7753703, 0x888e3e5a, 0x65c07537, 0x8e82f50c, 0xfc57a9f8, 0x1d745eaa,
-	0x201aba25, 0x8422e3c0, 0x0557640c, 0x78a0e092, 0xc8c7ba10, 0xced63fe4,
-	0xd1916546, 0x8b822f51, 0x224179e2, 0x6fc85298, 0xc17e5c5d, 0x713fa67b,
-	0x9266ca17, 0xfbf54135, 0x223385ac, 0xf1bfb3ed, 0xcdcfb215, 0xc39f6646,
-	0x8d2f3c51, 0x391ff3c5, 0xc2bf7d9e, 0x87f305f4, 0xf5a4f933, 0x17385adf,
-	0x0aef141c, 0x9bc2e4da, 0xf4516d70, 0x29c52c72, 0x1dee4958, 0xc03aeff7,
-	0xe6f5b9e4, 0xbf7784a3, 0x0e0fe999, 0x0507b970, 0xf7d5279e, 0xa0429856,
-	0xb77a242b, 0xfdd57a31, 0xf3872dc1, 0xe0fef85c, 0x8079390b, 0xf24cbcf6,
-	0xe505fe0f, 0x7fc62a73, 0x3b5c36ec, 0x853bbff7, 0x7a58e0f2, 0xd9475beb,
-	0x2c3c2a7b, 0x4f5438f0, 0xf7fee07c, 0xa264ce99, 0x8b08c313, 0xcd77030f,
-	0x2b9bf260, 0xfe91c6e5, 0xf4b42783, 0x7d53a58d, 0x7d4fa55f, 0xcd37bd5f,
-	0x8e39322a, 0x9479fc18, 0x90cc5ff7, 0xc48d7c35, 0xcde2f3fa, 0x75e16fb4,
-	0x11c20244, 0x3f4356f6, 0x2635bf51, 0x5f48db8c, 0x6f608d4d, 0xa1efb603,
-	0xcfab89b8, 0x29f5e785, 0x03722b2f, 0x78ed09a7, 0x906762b1, 0x6eecc894,
-	0x5ebb7011, 0xabedc4ac, 0xe80f43a0, 0x75c4472f, 0xfda035bf, 0xa03c770d,
-	0x5dc64577, 0x74f151cf, 0xbb8f4fce, 0xa6c84a9e, 0x31623df8, 0x9e66bab3,
-	0x7bb1d055, 0xf74e90e9, 0x43eedcf0, 0x1a74f03b, 0xcf486ded, 0x8173a2e3,
-	0x6f53e515, 0x1f91e5f0, 0x2e3ddfa8, 0xb0fed8ba, 0xe9056070, 0x3cbe741b,
-	0x1bc4ef56, 0x233ac040, 0x77eed938, 0x25f65d50, 0xd412b8b0, 0xe2274d43,
-	0xdd12aa2d, 0x3c70e69d, 0x5167e354, 0x5ca3ee0e, 0xf55f682b, 0xa29bb457,
-	0x30fded7c, 0xb8f85a3f, 0x515dfb95, 0x98eee8a2, 0x576e5fc0, 0x1d06dcf4,
-	0x9e67f712, 0xb914cb47, 0x4522dd63, 0x4a8d2dd6, 0x9ac60f9c, 0x53f2123c,
-	0x82f51bb6, 0xb7ce9970, 0x028c5697, 0x9dfa8ad0, 0x5efe3e05, 0x539e36b7,
-	0xf2ca590e, 0xcbcb0e72, 0xaf7514b3, 0x7a40dc17, 0xc2fe5135, 0x2fc12ef5,
-	0x082bfad1, 0x1601d5b1, 0x06a8ad1d, 0x2701ceb6, 0x9b81e75b, 0x9da1f3ad,
-	0x83a00bad, 0x9f8297ad, 0xaf8170ad, 0xb83e580d, 0xf98832dd, 0x52bd7e18,
-	0xb45cbca4, 0xfc7ae264, 0x675e4571, 0xf9460797, 0x8f2f9f92, 0x614ae079,
-	0x2e4d9d74, 0xdd99b353, 0x923172ab, 0x5177e27d, 0xb5a14de0, 0x9dec0202,
-	0xf190c98b, 0xeb20d99d, 0x0702ae08, 0x48fee783, 0x5c069479, 0x04ee573a,
-	0xd89aa972, 0x7628764e, 0x5d364c52, 0x87d7d61c, 0x54171e56, 0x49d201bd,
-	0x3ebc60f9, 0x2ce88321, 0x5cfcae8a, 0xdaf190c6, 0x3a9df7b6, 0x8545a38c,
-	0x84362d95, 0xe53f590f, 0xf3e55970, 0xd91f0899, 0x9ba9d276, 0x595e7649,
-	0x1563b7a8, 0x39d86eba, 0x184dcf07, 0x4e50a3fc, 0x52824d92, 0xb1515d5c,
-	0x677e8079, 0x74ebac94, 0xdbc657e8, 0x5719c580, 0xd59f8014, 0xe46568b3,
-	0x7ebc3527, 0x7ae1635d, 0xbd706bdb, 0x60da7e4a, 0xc8cac5f2, 0x73759ad3,
-	0x6e5f2993, 0x3ff7f030, 0xbce72c9a, 0x22327282, 0x9841533e, 0x44f73c4f,
-	0xe4101c21, 0x186b5696, 0xf7c08fff, 0x77c21fcf, 0x5deb8a6b, 0x594dcf16,
-	0x534ffa40, 0x676779f2, 0x245d8a59, 0x3f8616fc, 0xd2d59310, 0x5207478a,
-	0x7bd21f9c, 0x776e18c1, 0x5eb95a1f, 0x329ab6ce, 0x27581f1d, 0xfbae0fd8,
-	0xe28f977a, 0x084827d0, 0xd599f3be, 0x34744035, 0x428c8189, 0xd11dd7d4,
-	0x27640cc7, 0xa80b1daa, 0x7fc8a5bc, 0x06bc039b, 0x96e51fe6, 0x2d98f533,
-	0xe5c107ec, 0xa5ca1ef8, 0xd2ace9c8, 0x8d4971e3, 0xa5ad1f7b, 0x3c2af6ae,
-	0xa2413c21, 0xad0a49a7, 0x1538bb20, 0x13e19eff, 0xb953a7e6, 0xabf12a3d,
-	0x6def4f67, 0x42741c69, 0xed361f84, 0x0fabe6f9, 0xa34ddf50, 0x0f5d3b66,
-	0x1696dffb, 0x1ab00bea, 0xd517c4d4, 0x1b75672f, 0x955fd47d, 0x397f3eed,
-	0xaf78abdd, 0xfa7146df, 0x1b40fee2, 0x9ec1cb95, 0x2fdc69c3, 0x6bfe3ad4,
-	0x93e4e7e1, 0x750512b9, 0x905ecbac, 0xabe446bc, 0x050bea99, 0xdc7c20f6,
-	0x47137684, 0xa9bf79f7, 0xbd0d95f6, 0x2fa819af, 0xc43c67c1, 0xff42ad6f,
-	0x5c37adaa, 0xad62f54a, 0xd62fdb57, 0x13d77bf5, 0xb43b75dd, 0xd9bf6afb,
-	0x4f5f7ca4, 0xea8d9af5, 0x26bded3e, 0xa8f337ea, 0x67eed3fe, 0xa6fd2a66,
-	0xa940ff92, 0x772a5733, 0xeb333f88, 0x235e0cff, 0x68fcd6f2, 0x7042dd8b,
-	0xe2ced9ba, 0x6606fd6d, 0xd87deac7, 0x446cc89a, 0x8ddadbf5, 0x5567eac0,
-	0x1b4ff98e, 0xfc8fa41d, 0x5d5993a7, 0xab3cf58c, 0xf09e3047, 0x22651efe,
-	0x173ddda0, 0x1114ca1f, 0xd93d73cf, 0x5fb7aa76, 0x7f80eb5e, 0x4fa6179d,
-	0x4ae7f7ad, 0xd40cab3b, 0x7d88dd47, 0xf7356e14, 0x4266d93e, 0xd01379b8,
-	0x3b2d240d, 0xe2a6ea8e, 0xe97812fd, 0x503ef01d, 0x1a976b8e, 0xbeb0524f,
-	0x9447908f, 0x09e4093c, 0xa2a379fa, 0x04ece8b7, 0xfd8c79cd, 0x71f7cd1c,
-	0xefda99a5, 0x6e7f0e3d, 0xfe73c509, 0x02e3bc7d, 0xc136fdcd, 0xcd91f76d,
-	0xbc3ff004, 0xb188ae57, 0xcd82bfc2, 0x17e7121d, 0x886fee68, 0xec9fb79d,
-	0xdd0bfcbb, 0x4b703b18, 0x01657764, 0x2f504780, 0xe7b586b3, 0x21db07c5,
-	0x1d47f116, 0x57998dd4, 0x16ea8078, 0x5fddaca3, 0x54c5daae, 0x4399aa98,
-	0xb73b919c, 0x9121d1fb, 0x9c0945d9, 0x117970f7, 0x5e0f59c9, 0x46dcbc79,
-	0x66fba569, 0x598bf303, 0x8a762dbd, 0x5a9d9347, 0x68d727f9, 0xd2ea9fe5,
-	0x956d3bca, 0x6ee9de56, 0x6dcfbcad, 0xead7cad5, 0xb6cfcad1, 0xfee69671,
-	0x0d4af6b4, 0x02f37d3c, 0xbdf3fdcd, 0xce70350b, 0xf734ab8e, 0xd32c7467,
-	0xaf77e79c, 0x76ab9cd6, 0x2e0ed636, 0xb18f35f4, 0x08c41133, 0x567aabfd,
-	0xff70a0ed, 0xff3c1aad, 0x1f6ffd6f, 0xc8a7ffa3, 0xbdde31d7, 0x37743b15,
-	0xd165ebb9, 0x999dae3c, 0x59eb9427, 0x9cb6f6bf, 0x77431558, 0x54e6fc95,
-	0xff941bf2, 0x0e16c391, 0x7df6fddb, 0x8e0acf14, 0xae88ab38, 0x1f7b80a2,
-	0xa192f385, 0xba38aaf6, 0x32d900ef, 0xe89c8f85, 0x02a5e5fe, 0x857e34e8,
-	0x3cb094f0, 0x93acf0af, 0xd972f0e2, 0x1636de77, 0x4be9c96e, 0xa120f3c2,
-	0x6a85e794, 0x22e81447, 0xeca152e4, 0x29e92503, 0xf3abf961, 0xc007ec23,
-	0x6880fd40, 0x2759b6f2, 0x9bec77aa, 0xb98f5625, 0x86f67d58, 0xa57362e0,
-	0x067f2645, 0x25dff7c5, 0xc4cedebb, 0xb44a76b8, 0x139eaccb, 0x54c46d02,
-	0xa4a31890, 0x76afa9e5, 0xed871f50, 0xff2bcd2c, 0xb56d4774, 0x6f919727,
-	0xb6f09409, 0x67f5fe99, 0xa2648eba, 0xcb0407fc, 0xf6fc42fa, 0x332759ad,
-	0x25197f28, 0xcd014494, 0xe9471c4f, 0x24dcccfc, 0x78c3f919, 0x0f65101b,
-	0xab73c289, 0x9390fac0, 0x08ccd8f4, 0x67a8ddff, 0xbe940b79, 0x5e451aec,
-	0x54b65f6a, 0x4f803fc1, 0x7e78c2ac, 0x4c1bf74d, 0xc329752e, 0x6dca1cca,
-	0x37fbe0b7, 0x5017354c, 0x428e0a5f, 0xd5e7ef3b, 0xfa4d2d3e, 0xed557929,
-	0xbf76cf6b, 0xd348652e, 0xc4cec32f, 0x6391e709, 0xbe615ee7, 0x9b03fbf9,
-	0x1a1e59a2, 0xe6ce94d8, 0x4ff7e18b, 0x71aff7b1, 0x93b1a3bf, 0xd7df5aeb,
-	0x9ef5dfd8, 0x81e7348f, 0x0d3e90a4, 0x4aec0ff9, 0xca35779d, 0x6305e46f,
-	0xa8abf509, 0x715b38b7, 0x3dc0fdf8, 0xbe10e7d3, 0xa7e7cdff, 0x6bfdbe4c,
-	0xa6ee6cfd, 0xed6c79f2, 0xd6070611, 0x963ad806, 0x55bfb54f, 0x20dfc357,
-	0x90e5ea9b, 0xd13ec930, 0x1b31e6bc, 0x67fa83ef, 0x7ca4a94f, 0xd06e9fdc,
-	0xc38b35f1, 0x0e26a5a9, 0x6b4f9bcf, 0x48de6f50, 0x00bf6dfd, 0x61ed010e,
-	0xec7ce0a9, 0x3abbe47a, 0xa36b95d9, 0x2875727a, 0xd0fe874f, 0x56b81f94,
-	0x1ebe7d40, 0xfe27caef, 0x53062c05, 0x599d1813, 0x890c37d4, 0x63013c9e,
-	0x764f4dc1, 0x3ffd5357, 0x8a73c934, 0xadad7632, 0x83fa9aab, 0x8ff70321,
-	0x847c9e5b, 0x16b7c3f9, 0xe77a4cd7, 0x31f24113, 0xf0497e7b, 0x16f6676e,
-	0xf88c2c30, 0xaf3a82bb, 0xfa9b7ea1, 0x5f14609b, 0xdff8db67, 0xacc72a5f,
-	0xae3c6d4b, 0x316b42dd, 0x2ceee5e9, 0xe8ca7bfa, 0x5f902366, 0x48873e20,
-	0x5cf87af8, 0x40f20a76, 0x6f560d75, 0x78285fac, 0xf8a3e8d5, 0x1675cea1,
-	0xbdecacdb, 0xd79f1b24, 0xf467dd24, 0xeefcb1b6, 0x3a46a8cf, 0xef58f5db,
-	0x1070df50, 0x846d1cd8, 0x7a1161e6, 0xfde36c59, 0xc008dc17, 0xd1b793cf,
-	0xc0ef4379, 0xdf278a31, 0x24aeba67, 0x72880c39, 0x8693c509, 0xdeacbdd8,
-	0xecc9b66b, 0xf197a43b, 0x4ee1718f, 0x382fcfd2, 0xfa455c0f, 0x7805306d,
-	0x03ccaadd, 0x91b726cf, 0x7287fee5, 0x9ecbfcd9, 0xf4a9f441, 0xb6cdfd22,
-	0x4a9db988, 0x1f9df87f, 0xae750bf6, 0x5b83c2a5, 0x9f916436, 0xbcf85ea1,
-	0x5bae1251, 0x0ff7c138, 0x963efa2a, 0xfe10f4e2, 0xf73e6ed5, 0xfb4ddb0b,
-	0xcf4947cd, 0x271666bd, 0x58fdf6cf, 0xf4f61b3e, 0x9f207932, 0x117f12d7,
-	0xc91bde7c, 0xe1cf48e7, 0x9fe57287, 0x9d305fcf, 0xb8291dff, 0x190c9bed,
-	0xfdd86fbf, 0xbbb211c6, 0xdf1e7506, 0x18339da5, 0x9aff6127, 0x1d1cd130,
-	0x5d444fb3, 0x9fbf5466, 0x8f7ed3aa, 0xa9cd3905, 0xa9dfc9bb, 0xbff0717e,
-	0xb8f9a98b, 0x846be94b, 0x1f2cebc0, 0x87f23e10, 0xe58782f5, 0xd18e7545,
-	0x23de6026, 0x585abadd, 0x35ce909e, 0xbb9ec9db, 0xe4fd06d0, 0x34473a07,
-	0xe98f5f9b, 0xb835bfa3, 0xd6fc9176, 0x4c9953bc, 0x9be7767d, 0x8d7e940b,
-	0xc562a9e7, 0x3f098b2e, 0xc71b9fd1, 0xa148b5ec, 0xf584c4af, 0x7c852650,
-	0x15e7c48f, 0xd363fcca, 0xef3e9aeb, 0x685932bf, 0x001e0053, 0x00000000
-};
-
-static const u32 usem_int_table_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x51fbff00, 0x03f0c0cf, 0x1915c58a, 0x19d44418,
-	0x18344c18, 0x20685618, 0xb58969c4, 0x9fd329b8, 0x90c0c2c9, 0x40b9c40d,
-	0x7cc40f9c, 0xfc0c0c4c, 0x17ebc44c, 0xf5b04514, 0x84181904, 0x026ffc80,
-	0x85d70c0c, 0x8bbe1818, 0x03083030, 0xf1402ef9, 0x01ce2004, 0x58a06f62,
-	0x045e900b, 0x2c40ddc4, 0x7cdf8a22, 0x6bf20251, 0x37f95185, 0x847bf8d1,
-	0x1057ebf0, 0x47af2fc1, 0x161b1e40, 0x3e3f22d1, 0x3bd02922, 0x015f5810,
-	0xc7265f95, 0x0f27d0c0, 0xb8a87f8c, 0x4bfc9201, 0x0e5cbb20, 0x6096f6c2,
-	0xf2062860, 0x9bb0150d, 0x2f9403eb, 0x857dca01, 0xcc0003ca, 0x688cbacc,
-	0x00688cba
-};
-
-static const u32 usem_pram_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0x4514780b, 0x74f570b6, 0x9924ccf7,
-	0xf2124c99, 0x00493de0, 0x210e0311, 0x9970c044, 0x46a2c024, 0x141a020d,
-	0x84920275, 0x7e889790, 0x33feaeec, 0xa8a08901, 0x17acb9f1, 0x376141dd,
-	0x0c06e8b2, 0x60e03518, 0xba2eb300, 0xe7c045c1, 0x36bc8026, 0xb9f04324,
-	0x9d6f5ecb, 0xdd33d553, 0xc7c4099d, 0xffef7fde, 0xa55f9f8f, 0x71ebaaba,
-	0xe9d4e7de, 0x278f3242, 0xdf210a64, 0x9f968fc1, 0xf890848b, 0x206f5950,
-	0x8841922e, 0x6df466d7, 0x88cfa64c, 0x68e67a23, 0xd11d985a, 0xef435837,
-	0x9ed5cbe9, 0x186934a4, 0x1c790f21, 0x23e21258, 0x5ab54e84, 0x16f50520,
-	0xe0933ba8, 0x213e3a7d, 0x0ff8e8fd, 0x30f8e246, 0x1a18992d, 0xe0311067,
-	0xf9ad537b, 0x421eb089, 0xc3e6476a, 0x213b16fc, 0x9f9f7bfd, 0xa7eb888e,
-	0xf7c10def, 0xb59efa24, 0x6529efef, 0x13fd0e57, 0xf66ddff6, 0xf108146d,
-	0x71c7fcef, 0x8699ef58, 0x5d130e39, 0xd9b7766f, 0xbeea053f, 0xb6899f6c,
-	0xc0fb6ee7, 0xe5fed126, 0xda0944db, 0xf0233b0d, 0x8275cefd, 0xa695ea0f,
-	0xa4ae47d6, 0x9136c0f5, 0xf8d30f3c, 0x4092062d, 0x613371c8, 0xeb15873f,
-	0x5aac1145, 0x6dd77ebe, 0xa3495f30, 0xf7d04489, 0x2e88378f, 0x28d92fa8,
-	0xaf9d08f8, 0x8c07b5fc, 0xc578e803, 0xc23ea13e, 0x1f1beb41, 0x3ee83a33,
-	0xd8fcef97, 0x7ce146d6, 0x0e2663da, 0xa4a3ee23, 0x52908d3e, 0x03e996df,
-	0x9ba5fbe8, 0xbe802705, 0x4ed9dd74, 0x83695f58, 0xe3a45c3c, 0x228bae2d,
-	0xee6c918e, 0xd7cc08ef, 0xdbe7147c, 0xf9830f26, 0x65dfce4a, 0x6ee52404,
-	0xca2e9193, 0xdf603ae9, 0x3da7bcca, 0x053e716b, 0xd22fe59e, 0x8abf68f9,
-	0x6c270597, 0xdc40c2b1, 0xd7ce8eb0, 0xb05e0a22, 0x8daafec0, 0x7deaac23,
-	0x7d876e14, 0x1bd6fa94, 0x7d605ba7, 0x69458deb, 0xd716f1a1, 0x7d76a7fd,
-	0xdd13536b, 0xf3e3bd69, 0x748287b4, 0x4a5ea844, 0x4fe90b88, 0x8e8119f2,
-	0x85e7e795, 0xe2f7c418, 0xcc38913a, 0x3a15f1a1, 0xe9c07ef0, 0xf1958774,
-	0x12dbc701, 0x842ce03b, 0xc73b6eb7, 0x54c814a3, 0x8f94af8f, 0x7ae83e00,
-	0x2c763d6a, 0x6124f71f, 0x81c7a4f9, 0x33da7b70, 0x1eb5cb12, 0xc67f3e27,
-	0x75cb0133, 0xcf96171e, 0xe9606679, 0xbf63e4f3, 0x58053de7, 0xf1b8f06e,
-	0x253d6ff9, 0xaa79d658, 0xcf26f9f0, 0x7b372c32, 0x65fcf8bc, 0xeb2c2acf,
-	0x6e58b53d, 0xb2d17c05, 0x7ec3e3c1, 0x58753ddb, 0xf1ea7a36, 0x469eebf9,
-	0x3870d72c, 0xb648b2da, 0x7360e144, 0x3b453b11, 0x6573cd89, 0x9b1eb4cb,
-	0xf309eacf, 0x5a46d9bc, 0x3ad3704f, 0x3280cb85, 0xd689b67f, 0xf6b15407,
-	0x1c92f721, 0xf10fad33, 0x3594f6b2, 0x5a089cae, 0xed65a94f, 0x7379d623,
-	0x847d6922, 0xda8fb58f, 0xa289cfec, 0xacf551f5, 0xc9134c7d, 0x18fad0b5,
-	0xefa7ab3f, 0x695ae573, 0xd595bd3d, 0xe6f13f33, 0xb33d68da, 0xa93fbd8d,
-	0x2c3a27c3, 0x55b0f13d, 0x14202c76, 0xb9de4d57, 0x9bca892e, 0x5dc746ad,
-	0x7bc849c4, 0x892ef9de, 0xd90687ca, 0xde6ded85, 0x746eacc5, 0x77b77b61,
-	0x2edff629, 0xaa5db1bb, 0xb7db0fbe, 0x9ed8dd1b, 0xed835d50, 0xdb17b28d,
-	0x8a3f5647, 0x2f468ded, 0x5eaa4fb6, 0x65d7f58b, 0x55e7b61f, 0xaffec7af,
-	0xfed87d1b, 0x5c9bfdf8, 0x05fd6953, 0xe41dbdc1, 0x5dc10ade, 0x9e815242,
-	0xee4093ea, 0xf9f970d5, 0x6d1d101c, 0x446fe9af, 0x6efadc3e, 0xbfc00be6,
-	0xf507ebf8, 0x983edfa2, 0x89bce38c, 0x1c74c8e3, 0xa4e3e2f1, 0x334137bf,
-	0x257bfa4e, 0x382d38ca, 0xc6df444e, 0x24defad9, 0x2bde7aed, 0x0fd9c655,
-	0xdac2b4fc, 0xffa57db7, 0x9ebb4b39, 0xe329973f, 0x89eb847c, 0x1a7adbe9,
-	0xa7c2d03e, 0x7c2083e1, 0xf138e28e, 0xc64f5b7d, 0x327c2d41, 0xd3e1060e,
-	0xeff4e381, 0x070d38db, 0x3869f0b5, 0x97cf8418, 0x7dc19f08, 0x21c657db,
-	0x0e327c2d, 0x5ff3e105, 0xbee49eb8, 0x53fdb38d, 0x7fb67c2d, 0x498f841a,
-	0xef0cf580, 0x3f32bedb, 0xf327c2d3, 0xec7c20b3, 0x7da5ce38, 0x67fb671b,
-	0xff6cf85a, 0xfe9f082c, 0xbee8ce38, 0xaff32bed, 0xfe64f85a, 0x149f0835,
-	0xb633e001, 0xfc69eb6f, 0xc69f0b5c, 0xb9f083cf, 0xdf19c70c, 0x384cf5b7,
-	0x84cf85ae, 0x64f841e3, 0xf626bee0, 0xe3c69c6d, 0x1e34f85a, 0x3267c20f,
-	0x6fb9338e, 0x42709afb, 0x27099f0b, 0x8e99f082, 0xebbb64e3, 0xc7465198,
-	0xce3ef6b1, 0xf0b467eb, 0x104cfd79, 0x38e3d73e, 0xa938e8d3, 0x52671f17,
-	0x933e16a7, 0x29f0833a, 0xeaae71c0, 0x77af38db, 0x7af3e16a, 0x853e1067,
-	0x7db5ce38, 0x2ea4d7db, 0x75267c2d, 0x3b8cf831, 0xa36b9550, 0x3a1754ed,
-	0x95cafa45, 0x40972e1d, 0xd59da2eb, 0x8093bb45, 0xf62a225d, 0x89756906,
-	0xe6cb7df4, 0x8907f498, 0xb9c8eeda, 0x4ac7e813, 0xddb531ad, 0x52213d11,
-	0xb8c4e763, 0xb8f53562, 0xfd340319, 0x3453f3e3, 0xa30589ed, 0xddfded34,
-	0xc0fa9ae9, 0xfe9a4992, 0x3472ab83, 0xaecba1f5, 0xf64ff4d6, 0xa7a9a0de,
-	0xd359baae, 0x7ced787f, 0x6b25fb4d, 0x97ed354b, 0xea6896fa, 0x42fdd597,
-	0xfd747fd3, 0xe5fb4d72, 0xda6a0f8d, 0xd71ffac7, 0x3cb5c7d4, 0xbe3fe9a3,
-	0xfb4d79f5, 0x69378715, 0x6db627da, 0x3cafd4d5, 0xcecebaf9, 0x5f8fd8b3,
-	0xd022ebc6, 0x7f76613d, 0xf8f7e67f, 0x1bac46ad, 0x8ed05807, 0x722d65df,
-	0x35f8a31c, 0xd1c0b5be, 0x7017e28f, 0xf6457e0a, 0xda4b9280, 0x267bf3e8,
-	0xd3b12fb9, 0xdd18f7e7, 0xd8c3db97, 0x041e94a7, 0xc3a50492, 0xfdbea500,
-	0x63d19901, 0x23f3c0ce, 0x95fbe9da, 0x1888c086, 0xb312cf5a, 0x777e811b,
-	0x8a2fcc0a, 0xf4154914, 0xf411348b, 0xce481e0b, 0xa2abc17c, 0x298355d7,
-	0x71a10a1f, 0x24eec957, 0xaade33b0, 0x1d82f76e, 0xee983352, 0xcd21006b,
-	0x4bdfbb42, 0x0607b4fd, 0xe9b92517, 0xb5232678, 0x1bf3d5d3, 0x3869fce9,
-	0xebd00b7f, 0x7c7f307b, 0x294df9cf, 0x9bf33413, 0xe6689487, 0xfce91b37,
-	0xafde4276, 0xa7e7c53e, 0xc8449848, 0x3853845f, 0x094869bf, 0x9180ffce,
-	0xf9ea2bfa, 0x1ff38323, 0xd67ffd86, 0x2653fedb, 0xa43ff769, 0x237fbb54,
-	0xea91ffdb, 0x48fe7cb3, 0xe151ffdc, 0x90ffdb2c, 0x137fb652, 0xbf38371b,
-	0x93ff082d, 0x2f677f30, 0xb3529bf3, 0x5a1ffbb4, 0x89bfdda6, 0xfd5ddfcd,
-	0x82df9f2d, 0xbe139ff3, 0x5a1ffb65, 0x4d1bf386, 0x8fd0276e, 0x95646071,
-	0x1d4fce8f, 0x04490761, 0x40f3a172, 0xfd163239, 0x148497e4, 0x913dc75c,
-	0x8abede8c, 0xf286f4a4, 0x58fccbc6, 0x996c951f, 0xb4e2efd4, 0xb67378be,
-	0xb612e411, 0x21657f53, 0x8d1dea5f, 0x7937d222, 0x4e1be4d2, 0x28d9dbd7,
-	0xc77ea17a, 0x207d9393, 0xe44d2aff, 0x4f787cf6, 0xfe787e22, 0x9fa353f9,
-	0x5f4bef57, 0x8f95ac2e, 0x2df8a9b7, 0x90e547e8, 0x98165591, 0x1fa9aed7,
-	0xa1107ea1, 0xd427c5fe, 0x249420cf, 0xbe6cca8f, 0x04bfa8cf, 0x2fea36f5,
-	0xd5213b41, 0x75e25fb8, 0xae8c307d, 0x3f289f3f, 0x26f3ee17, 0x9e3a2964,
-	0xc8f7f8c4, 0xf807c11a, 0x14597db8, 0x3d687e05, 0x4d38de85, 0xfb0fee9d,
-	0x7c12ae07, 0x86380bcf, 0x9333e01b, 0xbd60478f, 0x67605eb4, 0xe8a21cef,
-	0xb0514fef, 0x8a40d560, 0xb338d08b, 0xa44e4b88, 0x5a59cfef, 0xa2e84328,
-	0x2f061055, 0x2059fa01, 0xe0119753, 0x69278de7, 0x7ae8389c, 0xf1b3b66f,
-	0x63e4ba67, 0x14f5aa6d, 0x3e5766c8, 0xa1414f5d, 0x359feb88, 0xd1fedb43,
-	0x619728ce, 0x3d572d0c, 0xc9ccf381, 0x54dfb6d7, 0x75cfada0, 0xef54eb6b,
-	0x6ef7a0c9, 0xa73fd129, 0x9cfba160, 0x5d2b8417, 0xade75d28, 0x56b70e1c,
-	0x5e0d5ec9, 0xda556dc1, 0x26e0a021, 0x5f7c2fb8, 0xf6ffd9ec, 0xa17ada65,
-	0xb05f5b57, 0xa73e374a, 0xff1ce39b, 0x683e8047, 0x83e80279, 0xa718f3c2,
-	0xd55c908f, 0xc18dc7d2, 0x50fa306d, 0x625c71f6, 0x8ebe3828, 0xdac2c7d1,
-	0x50f4f0a8, 0x9707a418, 0x7a14be9a, 0xc3d38db8, 0x8a1e9ca7, 0x6ae96ad7,
-	0x4cadf12e, 0xb2dfefa2, 0xe9e21766, 0xe8c850a0, 0x3d0a97e1, 0xc1e869b4,
-	0x8f41e9cd, 0x3d38dbbf, 0x4673f6dc, 0xb67c7a0f, 0x5b687a71, 0x29264e7b,
-	0xf14af13d, 0x3c53a9a0, 0x376ef0e8, 0x7c503d02, 0xf987a584, 0x8dd37dc1,
-	0xde02fad3, 0x9c5f03d6, 0x053db01e, 0x4e104ec0, 0xcf6a7ef8, 0x684e54fe,
-	0xc36bc5ea, 0x31b2bfe3, 0x6a98ee3b, 0x57f5e55d, 0xf5531dc5, 0x53375c5b,
-	0x9be45f53, 0xbc5fe9ab, 0xbed350b6, 0xa69176b0, 0x3baac17d, 0xef42f535,
-	0x6ffd35cf, 0x69ad565f, 0xb56ab5bf, 0x9296fda6, 0xb9f534c7, 0xfa6b5fee,
-	0x5eb054df, 0xff273ed3, 0xacfb4d45, 0xf5345b19, 0x34d7ae99, 0x2f3b0dfd,
-	0x31e81ebd, 0xc048a0eb, 0x71e638fe, 0xf71fdd20, 0xa4f2c48c, 0x717c89c7,
-	0xcb0133da, 0x4fcd8d7d, 0x7cbb495c, 0x26882819, 0x91167f4c, 0x2cf64218,
-	0xcaaf5777, 0x504e7d02, 0x7971feef, 0x1077b551, 0x07065395, 0xad6f39c2,
-	0x11c7f891, 0xe2528022, 0x50c407f3, 0x6d1b567b, 0x3dbdeb8f, 0xb614ad6f,
-	0x0a4dab3d, 0xe3e56e3b, 0x61ed4385, 0x7e2133e2, 0x3ec10326, 0xb9f6e2ea,
-	0x204cbdbe, 0x84e7eaf9, 0x8ffe472c, 0x5cfd3031, 0xa2726466, 0x1cff6b6c,
-	0x7fba8362, 0xe685d544, 0x95cca7ab, 0xaa91f408, 0xb5e2e3e1, 0x3ce46997,
-	0x3c6de881, 0xcd38d9d0, 0x5775c5f3, 0xd8ebde6a, 0x2bbae225, 0x7d508640,
-	0x07e48c3d, 0xfd97a00c, 0x8d6643cd, 0xceba7586, 0x355e401a, 0xd8fda3c6,
-	0x771199e1, 0xe63c024c, 0x53d27963, 0x8f71e580, 0x9e63cb1b, 0x788f2c12,
-	0xf36cb0aa, 0x33f2c32c, 0x4fcb178f, 0xfcb0ab3c, 0xe58b53c8, 0x2c5acf61,
-	0x587c7a0f, 0x61d4f01e, 0x1ea7bef9, 0x234f56cb, 0x171e9d96, 0x29bf0a96,
-	0xddd3d0f0, 0x4fa7ae49, 0x805dfd03, 0x07c4e2ce, 0x0a0d57aa, 0x8ae259d1,
-	0x59bdab87, 0xd6f371a1, 0x249d389a, 0x0861e868, 0x81e364f8, 0x5e9c4c5e,
-	0xade7b7c2, 0x9ed82f95, 0x1d8726d5, 0x7ff9f2bf, 0xf9cdbd0d, 0xa216f491,
-	0x7a3a81a7, 0x3d18bd4a, 0x87c7124d, 0xc18e69e8, 0xa71ff4ce, 0x1f6087a7,
-	0x628ffc61, 0xabc6ea30, 0x14573aec, 0x73f3678b, 0xb2d16a07, 0x7b9f3678,
-	0x15ae1d05, 0x48df3fed, 0xc8f773c0, 0x78808fbf, 0xaa61f77d, 0xdf7b9328,
-	0x7a5e9e9f, 0xfd0bbb87, 0x551f22a0, 0xb67ae3a2, 0xb8324447, 0x0cc81846,
-	0xeac84e92, 0xce75bfe1, 0x44bac34f, 0x9f7de162, 0xf3986673, 0x4f670228,
-	0xeb871789, 0x6357eb0a, 0xcfe3bc60, 0xca1323fc, 0xe6148639, 0x688b34df,
-	0x0bff13df, 0x506f804e, 0x499c991f, 0x0c0f0710, 0x3ed1da37, 0xf0b459f0,
-	0x667ad2f3, 0x29ab7e08, 0xdf515a8c, 0xfc2126d7, 0xa2357d86, 0x77e01f7f,
-	0x317f3931, 0x0df7ce78, 0xf3c097f8, 0x62f1f262, 0x1cb89172, 0xfdd2372f,
-	0x9d1ced77, 0xe403a0fe, 0xade185e0, 0xd7e95f9c, 0x7d28bcf3, 0x4aee3a2f,
-	0x75b8e850, 0x88f3a108, 0xefc71da2, 0xc984b86e, 0xdbeec52f, 0x05f5f266,
-	0xb59267af, 0xf9c53de3, 0xbbaf194f, 0xf81b05e5, 0x0c924b5b, 0xf06163f6,
-	0xf5e594a0, 0xda8b76c9, 0xd6d46cfe, 0x19856bbb, 0x3a2768f5, 0x068f67a2,
-	0x1fb7613d, 0x3b72061b, 0x9c654b09, 0xfb464925, 0x4ef72a31, 0x3346a5d7,
-	0xe4c7cf3f, 0x9418e6c1, 0x663da717, 0xaf53ffec, 0x9471b7a7, 0x40d210f5,
-	0x1e419a8e, 0xded4b6d3, 0xcf4af7fb, 0x3c4617d2, 0xbf926df7, 0x4cd0fb02,
-	0xfc0effff, 0x5d61220d, 0x5eb2b719, 0x872e9af4, 0xf3359be7, 0xca1cf7d1,
-	0x2977eb19, 0x891be217, 0x96e8571c, 0x5c638bea, 0x8bae2c9f, 0xcfed6bb0,
-	0xb2bd4d18, 0x635dbfb1, 0x541fc28f, 0x412a92fe, 0xe329fa02, 0x5925d3e4,
-	0x7d740956, 0x1090426f, 0xfd6056e8, 0x466dcdca, 0x95ce03b7, 0x5b7ade19,
-	0x4cdfc51f, 0x897c9289, 0x61cf16b9, 0x9d2fea4b, 0x4ce67a0a, 0x88048ac3,
-	0xbb162c1b, 0xf30fc9ef, 0x79312cbe, 0x0727c8bf, 0xa73df6b4, 0x55c7420f,
-	0x945c639e, 0xeaab8e58, 0x8f16061d, 0x009b8fd1, 0x1c5fc6e3, 0xf79b153e,
-	0x413b074f, 0xc68aa70f, 0xca3746b3, 0x665ffa45, 0xfc0a4e08, 0x13f314de,
-	0x697e3a24, 0x2dc63b5d, 0x11deca4e, 0xbc80bcbf, 0x4b3fb9ec, 0xd528f1d2,
-	0x15a4bcbe, 0x813f99e6, 0x371c444f, 0xf8e54c7d, 0x04c93fa9, 0x4f3910e4,
-	0x4862657b, 0x063bfb86, 0xf90cc862, 0x161bf33b, 0x4fbc01e7, 0xe547bf81,
-	0xdf241de6, 0xb5207886, 0x9cdfe099, 0x00198621, 0x7de433a7, 0x1e1538db,
-	0x87232572, 0x94829533, 0xf1c14c1e, 0xefc1fddd, 0xb4d41532, 0xb9e0638a,
-	0xc23ff8a4, 0x72471877, 0x50b7980b, 0x897b9ec0, 0x97e81ab9, 0x3f1a51fa,
-	0x9a51fa8d, 0x34a3f53a, 0x437222f5, 0x1425e402, 0x9f13293d, 0xb4d27080,
-	0x88ec928f, 0x555262c7, 0xafd1f603, 0xbe6dfc79, 0xe903489d, 0x7d5fcb3e,
-	0xee90b336, 0xc5896ae7, 0xf57394fd, 0x0e0cb145, 0xa33e25a5, 0x7f73d2cb,
-	0xddc61b47, 0x8c3f2548, 0x6fcfcec7, 0x051e6236, 0xdc994ab4, 0x7de949f4,
-	0xa20d89ff, 0xfd06c22b, 0xbd6573e8, 0xff7fdfc9, 0xf212fdfa, 0xb4a3ee38,
-	0xfa01266e, 0xc02791eb, 0x09d723f7, 0x7e185f2e, 0xaf74e42a, 0x013ba7e8,
-	0xf143e37e, 0xf574fbac, 0x4abe1cd5, 0xfb5d29fd, 0xfd2f960f, 0xbcbe4688,
-	0x93efba29, 0x027933c6, 0x00a417f0, 0x1e0fd7f2, 0xf8c7a93f, 0x7f1f81ab,
-	0x6907f1b2, 0xff8e9ef9, 0xfeba4fd4, 0xbfd63d61, 0xcbfadc3e, 0xbb697d5f,
-	0xd297ea97, 0x23653c3f, 0x494edf94, 0x8a4e09b5, 0x2b8db2f7, 0x3b902e6d,
-	0x7c06d792, 0xce27ca71, 0x870f4708, 0x06a57cb8, 0x78804588, 0xc749fc2b,
-	0xa1e9bd3f, 0xf89ec0eb, 0xc76ca36a, 0xc99d6a38, 0x5cf4a26f, 0x8f28b0d1,
-	0x3b7ac18c, 0x16703fab, 0x51b2bfe8, 0xd3a6a23e, 0x953ddfd2, 0x94357900,
-	0x921a0652, 0x7fa3f4a0, 0xf3e1b152, 0x546f60e9, 0xabf20092, 0xff983dfe,
-	0x87d4589b, 0x9ee8c685, 0x499818ed, 0xafd9f780, 0xb3a1e1b2, 0x6afe0da2,
-	0xbe9038c3, 0x37f7097f, 0x3f6b245a, 0x82b9273c, 0x54f2015c, 0x31f10781,
-	0x8bc5637f, 0x4ed31abf, 0xe1b1d3d7, 0x0541364f, 0xea4fc527, 0x9bf05fae,
-	0xcbbd1dd7, 0x87ca4eef, 0xd156bb6a, 0xee468e4f, 0xb2b13527, 0xaedbf64c,
-	0x6ca4f2a4, 0xd2f4ecbd, 0xbd2f65c7, 0x2067dbf0, 0xc9a1fd7e, 0xbf8e9c39,
-	0x073da5f8, 0xe2fad127, 0x3cbf722d, 0x908b0db6, 0x254bc210, 0x7a597ffd,
-	0xafa50f08, 0x463a31ec, 0xc6f7e7b3, 0x78b1f086, 0x19232ecb, 0xb91e13dd,
-	0x6d8cbbf5, 0xa9783096, 0x760e9f6f, 0xbf178adf, 0x3bbc8236, 0x892053b5,
-	0xb9e061c9, 0x85da0f7e, 0x23c42700, 0x6f1053c7, 0x1495feba, 0x145fa02f,
-	0x37dbe93c, 0xe3027971, 0x9e90d239, 0xce9d7e5f, 0xc991f25f, 0x792ffb09,
-	0xec1b2ef9, 0xc55484e3, 0x95d9fae8, 0x4adf2009, 0x1d826f64, 0xe4bcf64b,
-	0xde91bbb9, 0x9ddff78a, 0xae92e2c0, 0x95d406fe, 0xbfb0fede, 0xe0e6eb85,
-	0x1b888afe, 0x59e4aee9, 0xcb47df31, 0x6332252f, 0xb8be184b, 0xf2726656,
-	0x2354f3c4, 0x509dfdd0, 0x22fbc0f4, 0x627703d7, 0xbe6ef3dc, 0x62316a17,
-	0xc3334bfd, 0xc0d930d3, 0x2bd32ce5, 0xf0dd7a41, 0xd38bea00, 0x70895d83,
-	0xd21956be, 0xc437a80f, 0x1912d3fd, 0xc19e987e, 0xc99ea8f7, 0xbfd0e785,
-	0x8c457655, 0x7a87bcd1, 0x297f9945, 0x3bae9f9f, 0x13b5ec12, 0x8ffde109,
-	0xdf0acb9f, 0x4542bb53, 0x66fe2a5f, 0x3561befc, 0xdf856fe3, 0x4067337d,
-	0x180717fb, 0xa07bc0ff, 0xfcbae967, 0x6bbed889, 0xc0f280b6, 0xf8e1fc44,
-	0xf9cc837a, 0xd0aedb5a, 0x24b75d09, 0x05e8ab44, 0xf8458fc6, 0x7a2f5ea3,
-	0x92a7be92, 0x9f309597, 0x0a78e7ad, 0xfe7316df, 0xf96b219f, 0xef8bac9f,
-	0x99653e53, 0x33edfbec, 0x3f94afc0, 0x57e00ebd, 0xfdf61f39, 0x07cdcdb7,
-	0xfa7ca66f, 0x4f857ab7, 0xcf53f2b5, 0xef5b25a7, 0x7a9f4026, 0xa0dbfd3e,
-	0x4f96122a, 0x7cb0f3e9, 0x7feda83a, 0xf02a7e54, 0x45f802ab, 0xc8a7e085,
-	0xa8e0dec3, 0xd9568797, 0xd21e5611, 0xd99201df, 0xba14fe93, 0xf4ade853,
-	0x4143e5f7, 0x52e904ee, 0x5d20bba1, 0xdfa7742a, 0xfa7e16af, 0xc13249f6,
-	0x26bfe575, 0xd65cffa3, 0xe942f2c4, 0x66077b7b, 0xa85c9c20, 0xdeed48c6,
-	0x75d4fd81, 0xaf5eae9f, 0xd5d2efeb, 0xddfd75f3, 0xa6957aba, 0xb363597f,
-	0xfdfe2091, 0xb2e27e9a, 0xb8d1c867, 0x63eaf470, 0x59c3597e, 0xc2e817a3,
-	0xe5f7c012, 0x790bc4e5, 0x221d8186, 0x28ba05c6, 0x7e206b8c, 0xe7d939b1,
-	0x656372a5, 0x743f8b04, 0x58b603d9, 0x618cae5a, 0xb1bc40f5, 0xf29ee406,
-	0xe2c1103c, 0x01f95d8a, 0x9fca8c5b, 0x51126f6a, 0xc8f9b76e, 0x167e708c,
-	0x47c828d5, 0x76b7a46d, 0x4d35ee76, 0x06590cb4, 0xd15aa571, 0x1df83609,
-	0xe0d937d5, 0x29aba9dc, 0xfa02faf5, 0x451fe17c, 0x8ae97b4c, 0x75818db4,
-	0xea4baf11, 0x4e6ff2af, 0x59d3ef12, 0x9a0b7f74, 0xc7739f98, 0x423d9d1a,
-	0x153d20d6, 0x411a9659, 0xe27f529e, 0x86bcf688, 0x1f2945f1, 0xb69d64af,
-	0xd29f795d, 0xa5f3fa01, 0x6eedb41b, 0xa07f0fee, 0x3258c9f0, 0x2ca3fb96,
-	0xf2e5c30e, 0xfaed3134, 0xae8f8a02, 0x68989116, 0x4449bbbd, 0x166f747c,
-	0x234f107c, 0xb7e478de, 0x7940120a, 0x03a9c0a8, 0xbbd8c9f8, 0xf6d8eabc,
-	0x812fe669, 0x3c7fb66e, 0xd9693fe6, 0x11c3fdb1, 0xd5fd406f, 0x263e4343,
-	0xeee7fb3d, 0xff73c08c, 0xa4569dae, 0xef1daef7, 0xd425f90e, 0x6139335f,
-	0xbf3b5d9d, 0xd3f4031e, 0x0254dcb5, 0x306baef2, 0xd8aec78b, 0x3698f5f1,
-	0x33f7afd4, 0xfe6461fd, 0x3fd37761, 0x41fa133e, 0x76057749, 0xe428cec3,
-	0x23d7caa7, 0x6bbbdf30, 0x6e99d7c7, 0x9fb74fcb, 0xd1e79e0a, 0x5b052565,
-	0x2c317d61, 0x8df2a18f, 0xd3542f89, 0x761bcbf9, 0xf6d01719, 0x39ff37dc,
-	0xd768e406, 0x750f6656, 0x41cf6dca, 0xf194431e, 0xe29972dc, 0x8a9813ab,
-	0x33bfcd3a, 0xdf02e466, 0x3fcb84f4, 0x57d63e31, 0xaffca478, 0x62e08781,
-	0x33eacef2, 0x6fefb00b, 0xe318fb3f, 0x4ba4269a, 0xab7fbf65, 0xe57b46af,
-	0xfecefb62, 0x82df6e7f, 0x76fb2fbf, 0xfbef9bff, 0x7abbd738, 0xe749e83e,
-	0xfac1ee3b, 0xae27564b, 0xeef48fb7, 0xffc7fd85, 0x7bffeefb, 0xc52b7de3,
-	0xfbe2edbb, 0x5affcdfe, 0x36f1ffbc, 0x7e3b778e, 0x3fe6f3d7, 0x57df7d71,
-	0x6ff9bdce, 0xf6def78e, 0xadf5d8af, 0x067b2a86, 0xa9015f5d, 0x316182b5,
-	0x92dbbe37, 0xd76c80e1, 0x8f30fd73, 0xc34bce0e, 0x23014df8, 0x904d0bf3,
-	0xfb7e0747, 0x0b89411c, 0x1d751fa2, 0x1bae1fb7, 0xc8768254, 0x9987ae75,
-	0xb55520dd, 0xadfed366, 0x989c0b39, 0x0fd24973, 0x7b3ea1bb, 0xfd6baf32,
-	0xe204f7c9, 0x7f1da812, 0x2d35ce5d, 0xef5ed760, 0xa5eed112, 0x1fbbda25,
-	0x9ece990c, 0x3dfad04f, 0xfadadd73, 0xfada054d, 0x8dde3e1c, 0xc6ffad84,
-	0x7107c17c, 0x13f65355, 0x356710f1, 0x9089942d, 0x5542f90c, 0x98bfc12b,
-	0x7f7daf93, 0xe3c1f81f, 0x531c3c7f, 0x971c0a4d, 0xb6485c20, 0xfa48dce8,
-	0xeebe4700, 0x7d63d9d6, 0x244ccf90, 0x8de38327, 0x838c4ee5, 0xe65b7f73,
-	0x5596cbef, 0xb2cfc0ad, 0xfc56cfce, 0x4de0dee5, 0xe38dffb8, 0x2fe084a4,
-	0xbff444bb, 0xadff9d65, 0xe2fbe5e0, 0x8fe3c143, 0x3a97cbc5, 0xb8b20cbc,
-	0xccabf008, 0x16a985fd, 0xca0fab27, 0xc8de7827, 0x9fa905fd, 0x42d3788b,
-	0xcc8bdf79, 0x5f386ce6, 0x30148f33, 0x1afd71de, 0x3983f511, 0xe575c04d,
-	0x8f31904f, 0x7e4373f8, 0x6f3be026, 0xbf1515dc, 0x0270cb60, 0xb871173c,
-	0xb42a9117, 0xeff9c95f, 0x84cacbbe, 0xf6820673, 0x211722ef, 0xadbf52d7,
-	0x47f04b28, 0x4b157852, 0x0e9d1bc4, 0x1c816f71, 0xb5bdc4d1, 0x47fdf875,
-	0x8b9c6842, 0xbe4deff5, 0x5fe5d4fc, 0x323b3ca9, 0x1e41fa8c, 0x5849bb9e,
-	0xaff156dc, 0x70626f6f, 0x7c132cac, 0x7e774829, 0xee755f39, 0x83e71cf8,
-	0x0e3bdebf, 0xa3f664e5, 0xefd1a3a3, 0x6fd03977, 0x437ee4a8, 0x0d11d7b7,
-	0xa6eeae71, 0x9b3e7e54, 0x55cb536b, 0xfdcfdca5, 0x7e40bfee, 0xa6bb2d21,
-	0xf822b50a, 0xf1802471, 0x08d4ef5c, 0xfe4c31b2, 0x1931ffeb, 0x6154fd38,
-	0x627e001c, 0xfd91e026, 0xd1abe98a, 0xadbc2ab1, 0x3494f6b9, 0xe01e27a6,
-	0x0e754477, 0x0be163f9, 0x75c03e7e, 0xf4db447f, 0xadfb30fc, 0x5638b135,
-	0xe2df5bde, 0x34379c77, 0x9700cb25, 0x9a8aa61b, 0x2655fb73, 0x238d97ee,
-	0x795d60e3, 0x9b655d6f, 0x11697808, 0x66ddf09d, 0xa359d365, 0xb079cc3b,
-	0x3e309e1e, 0xca8fd5c4, 0xe78022ce, 0x082387d1, 0xf2efd1f8, 0xf834c673,
-	0x430d226e, 0x2b882e3a, 0xb5c39afe, 0x72c764d3, 0x1cb65e56, 0x6b4de74f,
-	0xa3858fb0, 0x7fbc01d4, 0xe3211827, 0xbd878921, 0x501bf4a7, 0x1bb5fac6,
-	0xf6e115ed, 0xed823c3f, 0xef3898bf, 0xfbfc2099, 0x51fb2de1, 0xec073fab,
-	0xae3ca983, 0x09ae83d2, 0x0cf747f2, 0x1bfa07c1, 0xe7ac61fc, 0xdf84efb1,
-	0xbeb3be55, 0x8559e981, 0xde70f5ee, 0xccace1cb, 0xe2c4dc7f, 0xfce27faf,
-	0x8159c0a5, 0x4abd7eaf, 0xa6af2a7f, 0xd751e3a8, 0x197d8e37, 0x268a9bec,
-	0x43a06ec1, 0x466d4855, 0xc6cac3e0, 0x6f3864c7, 0xe360eb99, 0x8c7f2912,
-	0xd3a09f3a, 0x9a3bf2c4, 0x0dbcafd3, 0x1adce4e8, 0xe242e813, 0x0dace3ba,
-	0x06bbf0e4, 0x7be19fe7, 0x227bef6a, 0x790178d9, 0xcea7b1f5, 0x8f525535,
-	0x9ceb8c9b, 0x432d9655, 0xb296ecf8, 0x8aa2725d, 0xb14d3a9e, 0x1f3caed8,
-	0x8748e650, 0x5c3e74e7, 0x1311f787, 0xd242ef81, 0xfbf15bea, 0x62aa5bd4,
-	0xd4961d18, 0x3d6232ef, 0xf32bfb19, 0xf9e8f329, 0x369e7669, 0x6e4178ef,
-	0x4b8020db, 0xd4bfc99e, 0x1f4e8619, 0x8ee72b33, 0xb84f53df, 0xf98edd28,
-	0x2c4f48ff, 0x1b44f455, 0xef2bb9e6, 0x3e3335cf, 0xc489e957, 0x49627a70,
-	0xf01123b5, 0x6a4764b0, 0x92c93022, 0x084b4e3f, 0xf03e27a7, 0x43e373b0,
-	0xaeeebbfc, 0x5c4f54d9, 0xb313d2ae, 0xf44e9023, 0x959ae5ef, 0xe88b8d73,
-	0xff6f0509, 0x03e6f2c3, 0xf86113d0, 0x56b346fb, 0x54d8dc4f, 0xc6e27a88,
-	0xfbe6a2d9, 0x17cd6baa, 0x09d913d3, 0x3b2eb173, 0xcfd0c2a3, 0x39bfdc07,
-	0x61fbf3c4, 0x6b17d01e, 0x9b8476cc, 0x26f46f5e, 0x55f6c7d7, 0x825fffae,
-	0x97d722b3, 0x43f761cc, 0x8243a4f4, 0x2e64bcf4, 0xd002eb95, 0x4beb9323,
-	0x4e71e56e, 0x07cd9c9d, 0x96a19b39, 0x0afdecb3, 0x950bd337, 0x9abfc98d,
-	0xae6fdb47, 0xda669d95, 0xdc90e6ff, 0xddcb54cd, 0xe1096635, 0x96ee43dc,
-	0xae7bb930, 0x4fda1c69, 0x53efedbd, 0x3ca96f2e, 0x430ce61b, 0xa2f3051f,
-	0x1ddfdf34, 0xda76fb1d, 0xef2fc02b, 0xfb7e788a, 0xf603b739, 0x033b7d8d,
-	0x7c53e9ec, 0xfcb8db3d, 0x5cf8f4eb, 0xc81ca953, 0xd3d983bd, 0x84459be5,
-	0xe303455f, 0x91618aff, 0x4fad073e, 0xcf16ff4f, 0x60ef1761, 0x0774b0e7,
-	0xfc2ad979, 0xadb77e2f, 0x1605ce06, 0x1cf017af, 0x005fbe19, 0x78731678,
-	0xe3173916, 0xdaf14a39, 0xe53fe7f0, 0xa6a2dfbc, 0x5f0f18f5, 0x2bf6d3e4,
-	0x29f5761f, 0x4cf247f0, 0xaf790f0c, 0xc9f5be08, 0xeba0cf90, 0xe78d5ce7,
-	0xdaf5e547, 0x7ef907e7, 0xb4fe8a17, 0xe4fbe857, 0xd3bfcccf, 0x1ea0fbc3,
-	0x123f252e, 0x5c29fb2e, 0x70f5fe32, 0xd40e0de9, 0x01f3c7be, 0x2b0e3c3d,
-	0x649d2572, 0x6e7e1f00, 0xf15ca170, 0x42e143be, 0xb1e3bbe7, 0x40fb9ae1,
-	0xbcb8738e, 0xf4d7706b, 0x02157e87, 0xb75e2bf6, 0xad024f65, 0x6327abcf,
-	0x78a178e1, 0x070f56ad, 0x03837ef5, 0xaabcfaf5, 0xc7e4022d, 0xfbdfe42e,
-	0xc31ef895, 0x5d6e547b, 0xed3cf546, 0xe4dd20bf, 0xfdf07386, 0x9b940111,
-	0x47c6dd0a, 0x8e25fb30, 0x03a3a1cb, 0x3f515302, 0xe4760a35, 0xd3047f47,
-	0x704f1457, 0xc4f34bbf, 0xbc73a7af, 0x2352b8b0, 0xc52563c3, 0xf4f3f01b,
-	0x63af5e26, 0x4a2de076, 0x39f05ebd, 0xbbab9004, 0x8c5f7664, 0x8e04e240,
-	0x847e9504, 0x04ecd5f3, 0xb4779e15, 0x28dffa33, 0x8f81f138, 0xf043f7fe,
-	0x33dd2bdc, 0xf4afa63b, 0x3e29c0ae, 0xfde78b42, 0xe379ad11, 0x9bf9c1fa,
-	0x737bc4e0, 0x9cf0629a, 0xbb2d58e8, 0xbf9525ff, 0xf00be7a7, 0xd1f7d43b,
-	0x438584cc, 0x088cf37e, 0x79c50fcc, 0xa65d9853, 0x7bfa4f96, 0xfe6fbe80,
-	0x45692551, 0xc7942c7b, 0x04de7ee8, 0x3410cde3, 0x09104ef9, 0x09ff3a03,
-	0x7cd5bfc6, 0x9249f181, 0xef96f31d, 0xedcf2bb2, 0x5e2cbbec, 0x799c1e6f,
-	0xef851e68, 0x13a255b9, 0x0c9ba85c, 0x2059838e, 0x09941e6f, 0x7db9cbf0,
-	0x81e98bb2, 0x853bd428, 0xefc51eef, 0x0e590ad9, 0x8fbc291a, 0x7ca397e9,
-	0xbd511f3d, 0x0a5882ed, 0xf70f1fa9, 0xee76cce0, 0x7880e69a, 0x95fec64b,
-	0x2b39ce70, 0x20f07ed7, 0xbb3573e0, 0xaac8e907, 0xeed3f45c, 0x7e4053ba,
-	0x06f14c3b, 0x9d99cfef, 0x9d20f07c, 0xf155d6f7, 0xcf396e78, 0x9c237f15,
-	0x27dbce63, 0xdfb41d3a, 0x16adeb82, 0x66bcc738, 0x2adc48a4, 0x5a4adcf8,
-	0xaf33be31, 0xb039ceea, 0x0faa12ee, 0xf72864c5, 0xfa844b4f, 0xafdf013a,
-	0xf08dbaf4, 0xdaeb66bd, 0x3a0cc6b3, 0x07ed117f, 0xc75caf60, 0x106e55fa,
-	0x5dfa909c, 0xca18f4d4, 0x020da2cb, 0x4ad3345e, 0x1b335fed, 0xe3a667d7,
-	0xefa3aeb6, 0xbc317ad3, 0x886ee30f, 0x27ce11b9, 0xf13ae92b, 0x78d509fd,
-	0xdf445d2e, 0x75a4cda3, 0xde389dc3, 0x810275a2, 0x264b03ef, 0x01323f24,
-	0x3b27dbc6, 0xaed0fda1, 0xdd611b5f, 0xfaf9d1b7, 0x8817f1d3, 0x3fa0d36d,
-	0xc760a5f9, 0x46ea87fb, 0x0baddc60, 0x542f0c36, 0xe63ac70d, 0x0c103b13,
-	0x651f3a92, 0x4efb0447, 0x755968b8, 0xcdabec0d, 0x406c9f1b, 0x046b3aba,
-	0xc28c7e3d, 0x3c874ddb, 0x2e79646a, 0xc6a3decd, 0xfd1c9536, 0xdf152228,
-	0x1b31a3bf, 0x921626f3, 0x709bcc7c, 0xa47b3357, 0x0f84657d, 0xb2ed6ae2,
-	0x6f3c087d, 0xe7c2695e, 0xfd312f9d, 0x0db839d3, 0xd627dbe3, 0x5fbe04c9,
-	0xf52eb15c, 0x89e3c069, 0x9bd232cd, 0x1bcb2cf8, 0xc5897e28, 0xb1d79ac9,
-	0x352c4f71, 0xa0b57bb2, 0x5f8bd69d, 0xb40af254, 0x51c8ac72, 0x2f4a728a,
-	0x6b72f497, 0x46d593d1, 0xf21ed920, 0x9474e96a, 0xef54a557, 0x90f5a100,
-	0x306a8357, 0x5797aa6e, 0xc8a2c495, 0x5f8874a9, 0xbe0f9616, 0xf1d02d6d,
-	0x8183ecad, 0x5f6bff56, 0xb77a053e, 0x49e04acc, 0x5a7f6485, 0x80417460,
-	0x6d35e65f, 0xa0f812f9, 0xde045e64, 0xf01c75c7, 0x26b37c00, 0x8bafcf0e,
-	0x6f08857c, 0x78b72f25, 0x95ce96ad, 0xb75ce3f8, 0xfd6a5c48, 0x5c451255,
-	0xee877eaa, 0xe74af4a3, 0xf051bdb9, 0x743ca881, 0xbbdefb5f, 0xc76eb033,
-	0xf6e32d75, 0xd22b1ac1, 0x9f9fa1f3, 0x7af4095d, 0x0102bddb, 0xdd789d7b,
-	0x2b0fa035, 0x880e0ad6, 0xcbdf170f, 0xefa62fde, 0xfd0fbac3, 0xa515d19a,
-	0x7fd0076f, 0xf6c7bac5, 0x820dff62, 0xb43fc603, 0x89ed10be, 0xb048af12,
-	0xfa3b437d, 0x614f540f, 0x57b3599e, 0xaffa004c, 0x0764dfb8, 0x23a14953,
-	0xf9db2e85, 0xecc4087d, 0xbe8b331c, 0x15160ab7, 0xc51e93df, 0x4fa82102,
-	0xbd2a4e81, 0x5fdace8c, 0x36409d92, 0xf64ba717, 0xae09fc1d, 0xe767c55f,
-	0x74ef874c, 0x047ea98a, 0x975e6d3a, 0xe23b046b, 0xfcc04f84, 0x49749e8a,
-	0x4a3b6a2c, 0x0567cba1, 0xd07baf26, 0x7b0e8ea3, 0x4ba71dd0, 0x5128fe85,
-	0xb6595fa3, 0xfdf0264f, 0xdd1e9ebd, 0x908dfd72, 0x32f851ff, 0x6f5d0fdd,
-	0xd1cfcd6e, 0x48e0575e, 0x2f5009eb, 0x8fde5892, 0x12e50fc2, 0xdefb0fcb,
-	0xbfcdd3eb, 0x87e78229, 0x2c883f01, 0xe74fc97f, 0x0bf37b7d, 0x66792f98,
-	0x6875fb53, 0xe941bcdf, 0xd9bfe000, 0x7fe8fc4a, 0x950e50f8, 0x6f988836,
-	0xe67f244d, 0xaedf952c, 0xfe2cbfe4, 0x5de11583, 0xcbe4d5ba, 0x6e97efa3,
-	0xf3063a3f, 0x30079611, 0x49bbc7bf, 0xde1fe760, 0xfdf031b6, 0xf2c4a950,
-	0xc176f470, 0xe71648f0, 0xaa2d78ea, 0xa136ec00, 0x57b3dd8e, 0x6c937f5a,
-	0x0775c552, 0x2f38ca45, 0x63e787ed, 0xb8678a5e, 0xa7d6011f, 0xc94ddfbe,
-	0x9178e9bf, 0xa3695fd1, 0x695cf68c, 0xc84e96dd, 0x6c3d2cc3, 0xb2b73f42,
-	0xfc11acee, 0xbc3fdcd8, 0x55f3f784, 0x3c9a8a36, 0x6ff91ebc, 0x04dfa275,
-	0xe50d5bf9, 0xeb437e78, 0x0faf58ed, 0xb17a079f, 0x7fc5ad3c, 0x4bddb1d8,
-	0x95f8b841, 0xbef0d9df, 0x368dd6be, 0xeea9eefc, 0x3da7f9c2, 0x57eaddf2,
-	0xeddf305f, 0x0941fc34, 0x5d48baeb, 0x931d60be, 0x997d746b, 0xc4e261f9,
-	0xa5eb7b41, 0x7c839f2f, 0x7fad8eec, 0x5bd60e7b, 0x9ee75ff6, 0xb21abc83,
-	0xf60ec233, 0x0fa6e548, 0x79559f30, 0xd99224af, 0xfe2f9d7f, 0x3b80f30e,
-	0x6139343f, 0x271dceb4, 0xd1bd8086, 0x04dbe5b9, 0xba5defc8, 0x73c61a63,
-	0x4dcb6e96, 0x05e26124, 0xeb74094a, 0xb21e43eb, 0x0dcd5f1e, 0x73ff98cd,
-	0xe41be286, 0xb17f3043, 0x83e59cbe, 0xe2de783a, 0xdef9f0e6, 0x1b14f23d,
-	0x193f5d66, 0xb30362e4, 0xaf9a2e0b, 0xf1e28078, 0x6fe03ef2, 0x4f2e6af3,
-	0x0cefe3c2, 0x54f141fc, 0x57cda913, 0xe161b2fc, 0xb6819e6f, 0xf35eb886,
-	0x807dfd15, 0x3e4f929b, 0x58f5d22b, 0xd6cdf024, 0x287e63df, 0x01cf2de0,
-	0x21cbf9f2, 0x293e1710, 0x10fe3007, 0xefc261d8, 0x1c774b2c, 0xdce9fe42,
-	0xb5f31fb6, 0xeeebcf09, 0xcb1fc124, 0x9eb1e5c3, 0x96560dca, 0x0fe1c8e7,
-	0x1b0e9079, 0x8ef9e73e, 0x3c958e8c, 0x1ff2dec8, 0xf853225b, 0x4f2c2a7d,
-	0xc7c37cb3, 0x8430af3c, 0xe002612f, 0x7982fda9, 0xec1c0aa5, 0xd42b8700,
-	0xf3e1bcf9, 0xdf79834c, 0x3f805f1c, 0x7cc1d390, 0x041f5a5d, 0xe13e9bf9,
-	0x0f230910, 0x3cb3d73a, 0xfc394ee0, 0x7e4accf7, 0x4f9eb36f, 0xebcb7d7d,
-	0xbffad8bd, 0x221a7c2f, 0x1eae381d, 0xc3e71d4e, 0x9ce3f1cb, 0xf7f07fef,
-	0xfe826521, 0x81cf93fb, 0xda1bcb1e, 0x899f788d, 0xfdf13fe2, 0x5a78f076,
-	0xf31126c7, 0x9bea6b3e, 0xe5eb8e51, 0x273f0545, 0x1bf7afd1, 0x468adebe,
-	0xb63a27a6, 0x3a167d5a, 0xaf5bc74e, 0x6c573d21, 0xd3bcc76e, 0x18af75bd,
-	0xcbe754db, 0xaa7c27a0, 0xbcbc77f5, 0x6dca0c6b, 0x7e98bf7e, 0x9b14631e,
-	0xfc29b2a7, 0xcf9b953c, 0xec59e66a, 0x2dda37ad, 0xb4ef9f17, 0xc609bae4,
-	0xeccadd3b, 0xe2f5d3a5, 0xf9985f0c, 0x49bd714f, 0x0f3b2d48, 0xef12faa5,
-	0x7bb2b359, 0x245b44d5, 0xad4b5fda, 0xf7470e13, 0x7988d283, 0x79aa2b2f,
-	0xce7dcc9e, 0x0af7c024, 0xd604d5eb, 0xabe012bb, 0xbb65e3f2, 0x26dd809b,
-	0xa867e527, 0xf59459cf, 0x8819fb1b, 0xa5ff854f, 0xe08919d6, 0x3bc9127f,
-	0x5d71d608, 0xe812d7ca, 0x8b0f56bf, 0x47f393df, 0x56f3c187, 0x8e27bec9,
-	0x553adb8e, 0xb5e84270, 0x34fbdd27, 0x2e998671, 0xf8b17ded, 0x5fdd1c0d,
-	0xf680d3b7, 0xb7e0d5a0, 0x1ac42ed3, 0x0e849ad1, 0xa43883ac, 0x0214fc04,
-	0xf41e21f3, 0xfdc16798, 0xcd4236c8, 0x94e7e853, 0x449ff734, 0xf774904f,
-	0xc30390a1, 0x385abd28, 0x39712abd, 0x8e9bfb2b, 0xacf786db, 0x6a91a4c4,
-	0x5635df20, 0x4f0dda37, 0xe869fbf0, 0x41e4246f, 0xa74892c4, 0x3a26fefa,
-	0x38fbe6af, 0x1ea6af3a, 0xe3d6d2e3, 0xc2c74866, 0xbe3897e9, 0x05a2e98e,
-	0xcd3310e1, 0x796bf8a0, 0xeb4213c3, 0x4e27898e, 0x6b5fb43f, 0x2801efc1,
-	0xfbd5797b, 0xebb458b0, 0xc8d3eba6, 0x36b4e889, 0x53ad81af, 0x1c4edcf3,
-	0xa5dfee02, 0xabd74e7d, 0x714617a9, 0x09112779, 0xdcc59de4, 0xbbfc384a,
-	0x5fbef035, 0x013837da, 0x5fb843f0, 0xcf9025ed, 0x41f7cd12, 0xb7f4d7e7,
-	0xcd807443, 0x0c871daf, 0x43bfabb2, 0xbfeb9cbd, 0x25fc9651, 0x329e9451,
-	0x62615687, 0x49125676, 0x9ba5efc3, 0x4a7ca1fa, 0x79839659, 0xa32d4227,
-	0x086b61ab, 0x00b0cdf2, 0x3fba9bcf, 0x9351ed12, 0xd2237899, 0xe2367be1,
-	0x1661d395, 0x7043cf1f, 0xa1d0372c, 0xd69455a4, 0x814d7be8, 0x8a42c31c,
-	0xa2687a84, 0xb94657e3, 0x9f28a3aa, 0x2774ccd6, 0xf6c2c619, 0x3bb95ede,
-	0x52f6b90b, 0xaa1a0888, 0x1969eef7, 0xef04228c, 0xbdde20f1, 0x6bc6807b,
-	0xec153a95, 0x6d7f9df0, 0x32eeb064, 0x9b5f7953, 0x3e8feac2, 0xdc2577b4,
-	0xcf6e9337, 0x49f6147f, 0x7851f6cc, 0xd58fe5de, 0x9bddf3dc, 0x39d6517e,
-	0x173f8372, 0x3abe05ee, 0x1df5eec0, 0x777e0d6e, 0xa3787a8f, 0xd1fba945,
-	0xd86fc88f, 0xbcad728f, 0x1bb63f7e, 0xa1cb4ea0, 0x81dcfe71, 0x472f9f74,
-	0x74969a1d, 0xa1af1d29, 0xd93e0930, 0xd0ea357f, 0x30eef81e, 0x578f8704,
-	0x82141eee, 0xc3fcb483, 0xd5932d3d, 0x0f70f870, 0x857d21d8, 0x7d0fabc3,
-	0xebe87088, 0x6c5d29be, 0x935cbc07, 0xd6fbc06d, 0xc16c38ae, 0x45fd0af8,
-	0xe3e23ea0, 0xbbe5efac, 0xa11fc56c, 0xd354ece3, 0x429ef297, 0x4dd1bd57,
-	0x628fb12a, 0xe96a6cf7, 0xf5ca2ba7, 0x25abac36, 0x358f75ca, 0xf78ff71e,
-	0x76e35c00, 0x0b8ea73b, 0xb8b135d1, 0xeefdc1c7, 0x5bf32ca3, 0xf2f254a3,
-	0x6225ec9a, 0x81c9c40a, 0xfb43e217, 0x8de65f89, 0x19f74118, 0xde6032ef,
-	0xfb8b28fc, 0x2b63cc20, 0x7721f808, 0x1ee20aec, 0xbe218827, 0xd9abe650,
-	0x9af5fcc1, 0x396f8342, 0x6015ef3b, 0xb47d10bc, 0xc023e8e9, 0x1db1a3e8,
-	0xa9a2a3e9, 0x6347d19d, 0x06644e75, 0x3f03373b, 0xc60496bf, 0xa23bde02,
-	0x51269abe, 0x151a1ffa, 0x91ba01a8, 0xe5a6e7bd, 0x3d708a5d, 0x7c3f161d,
-	0x7abeca7d, 0x4b6d6fc3, 0xe06943ca, 0xe033ee4f, 0x37029779, 0x858c5fa5,
-	0x58b6c5e5, 0xfc035fdd, 0xedb4272a, 0x6d6fed85, 0x36f31f79, 0xd86efb6c,
-	0x66dbef05, 0x42390c53, 0x5beed6f3, 0xd767f78e, 0xd87dd806, 0x05e024d1,
-	0x3c3bdebd, 0xe104ff18, 0x1a4f7601, 0xf91da3c0, 0x5eff1365, 0x7051ab2c,
-	0x1a1f9e81, 0x890deec5, 0xebf3b0b4, 0xd7111621, 0xcec2c439, 0xbdf7e259,
-	0x95bf8225, 0xfb01bf75, 0xa69943c7, 0xbcfdffde, 0xaf89a4bf, 0xe854f82b,
-	0x28d24a89, 0x4ce47fb8, 0xa2d13b8c, 0xa8d89fa1, 0xca78d514, 0x88788f7b,
-	0x47aa0ef3, 0xff3dd8af, 0x94abd02e, 0xfc00be7e, 0x968dfb04, 0x4a6e0023,
-	0x70cfa07f, 0x0defa1f8, 0x1e60f987, 0xecb617b0, 0x3de2225e, 0x6bc47d1a,
-	0x491bdc26, 0x914667fb, 0xfdf4adaa, 0x425a68cc, 0x13d78e3d, 0x2b207d79,
-	0x1a713f53, 0x3d7cfa04, 0xb64ebb8f, 0xc931fcf0, 0xd186ea3e, 0x5c766750,
-	0xea245256, 0xe16f8505, 0xb738080e, 0x75f9f896, 0x00c5204a, 0x58f85378,
-	0x56fc180a, 0x2452b4aa, 0x18f20187, 0x7dd0f1de, 0x9dcbbd4b, 0xdf652fab,
-	0xcf9fea71, 0xc1f9ebe4, 0x3d17f5f6, 0x099eefbe, 0xb7372df0, 0xad03723d,
-	0x0e7a5c57, 0x479707cf, 0xa1795c55, 0xebf42f7b, 0xdbfce77f, 0x4d874051,
-	0x7ec298df, 0xe1c3550f, 0xc029e2d6, 0xbdf932f7, 0xc951242e, 0xb1e55633,
-	0xcbb71b42, 0xf8299510, 0xffaced1c, 0xf8081140, 0xf0b14af4, 0x9e32547e,
-	0xe5d14e1f, 0x9f87fead, 0xc132f9c5, 0x71250030, 0xcf3628c9, 0x324ecc37,
-	0x9ce0ffd3, 0x173f1a69, 0xaf72477b, 0xdef1d2b0, 0x357cec21, 0x19aaae33,
-	0xc6c4c4ea, 0xfbda26cf, 0x6b13320a, 0xb8c2c6a7, 0xdf18c9d1, 0xdaeb35ca,
-	0xc812bd53, 0x8c9a9269, 0x88d38979, 0x7a633eca, 0x08eeed03, 0xe3902eba,
-	0x742c8cd7, 0xe7ede54e, 0x4d43ffe8, 0x2a99f6e4, 0xc72ae37f, 0x8d54e75c,
-	0xf78b52fd, 0x9fe9fd01, 0xf2e1ede2, 0xfce33e2c, 0x77c9e2df, 0x1eb3f9c2,
-	0xe10e399e, 0x27a3ab7e, 0xd470f5dc, 0xab815dc3, 0x9fd98e1e, 0x86c6a738,
-	0x2e1e9381, 0x48ed48d3, 0xdc0a63d0, 0xc77970f5, 0x9de2e8cc, 0xabde1334,
-	0xe0c48ef8, 0x23350ef8, 0x9ba41ea1, 0x01ef1168, 0xf5e28cce, 0xbab04737,
-	0x64a8ef82, 0xae1eb7c4, 0xc666387a, 0x58e3f7f1, 0x2f00bdff, 0xe202e509,
-	0xcc9ba147, 0x31ddaad4, 0xec507a2a, 0x2e1c69eb, 0xfb46bed4, 0x8ade3739,
-	0xafb02671, 0xe08425a7, 0xd6ce5b96, 0xf2dc3b95, 0xf4a9f83c, 0x72bfbc75,
-	0xff3fe10a, 0xca2f3c14, 0xce0555e4, 0xdad1be53, 0xa69ad3c9, 0xc338829f,
-	0x7efb9350, 0x1080cfa0, 0x1475e783, 0x707447ee, 0xd767bed7, 0xf870f5d6,
-	0xb131fc03, 0x3a14bc27, 0xe3c2c0fb, 0x20c8034e, 0xbcc797b0, 0xf20d1196,
-	0x86c5349b, 0x715c4b8d, 0x0e383f38, 0x63a457a7, 0xcf83b881, 0x423fa9ed,
-	0x5aa3ed8e, 0x36c72552, 0x96d3ee8b, 0x4c729ef8, 0x8e64d3c1, 0xbbc4c987,
-	0x934be20b, 0xd045f489, 0xed0e481f, 0xe7d95bbf, 0xf6103240, 0xc1c58379,
-	0x67df3fe4, 0xbcd4df70, 0xf8b3f984, 0x0b6659fc, 0x02435f7e, 0xce104752,
-	0x91df7829, 0x5a1b18d7, 0x4fbf9287, 0x66115486, 0x7bc3cdcf, 0xc85c29ae,
-	0x75a15177, 0x8482ac98, 0x75f0fdf7, 0x7b33a99c, 0x5bad8f21, 0x9d814774,
-	0x1bec21d7, 0xfc93fb83, 0xe9ff4023, 0xee35cfdb, 0xda7680ae, 0xf1fb08af,
-	0x59162ff5, 0xc3b021fc, 0xb93e7be4, 0xb2953b77, 0x8509ea35, 0xfbe0b37e,
-	0xde81cbd4, 0xdd6103fd, 0xd1d54053, 0xf659e772, 0x6376431d, 0xecf304ba,
-	0xff7966e9, 0x8125c439, 0xdfa7ab7d, 0xa1a74bef, 0x08604578, 0x5d8a29f8,
-	0x1eead536, 0x57cfa569, 0x9b66eff3, 0x05188ece, 0xf4c1f978, 0x4f4b4074,
-	0xba511d0a, 0xecf00f1a, 0x69fcf8ca, 0xcddfc730, 0x7a009738, 0x43dfb151,
-	0x026b8a76, 0x3b37a7ac, 0x3dd5897e, 0x3b017ac5, 0x2e67b15e, 0xdd9087e6,
-	0x74a641d4, 0xcbc71b74, 0xccab733c, 0x600fcdee, 0x48eafdfe, 0x473b5ee5,
-	0xb791d824, 0x54d94ead, 0xd586e707, 0x6b7efe2c, 0x83f1ac95, 0x86dd90dd,
-	0x66fbb3ef, 0x6da65f6f, 0xfe604cff, 0xfb57a17e, 0x3412589c, 0x9cf6edf7,
-	0xc035e0d7, 0x3123c3bc, 0xaf3f413f, 0x79fa7f7e, 0xe6adf3f5, 0x636ad57e,
-	0xcaa748ed, 0x6560592e, 0xaaf750f6, 0xcae0ebc7, 0xe7e0deba, 0x93480f36,
-	0xb5abf754, 0x082c8ead, 0x328c6f77, 0x79ef029e, 0x00e2cfc4, 0xc3dff255,
-	0xe59b83dd, 0xde81f166, 0x98161de6, 0xe1a0768a, 0xf608bf49, 0x4100b0fc,
-	0xe02b3bfb, 0xf8d02c32, 0xee4fcc01, 0xbdc007e1, 0xd65eb426, 0x01f98bb0,
-	0x4fe8d5f5, 0x027f5194, 0x387accf4, 0x17c01e9b, 0x41fe8694, 0xfc85dfd0,
-	0xcfb82ca9, 0x12c3fb92, 0x5ad497a5, 0xf5a37fd6, 0x096ae35d, 0x927755fc,
-	0xe363294c, 0x98d7efc3, 0x93555fa9, 0xf508224c, 0xf8785eab, 0xc06be9fd,
-	0x09758e5f, 0xad287f70, 0xf7fa58d7, 0xf8debfdd, 0xb81afef0, 0x65fa946f,
-	0x7f2aaceb, 0x78fe37b7, 0x0b918c04, 0x3dba47f0, 0xa1f0237f, 0x8a68af12,
-	0x111f7ce0, 0x8068bba4, 0x57274297, 0x7e8f9b2f, 0xe725c445, 0x589e4087,
-	0x16ffc716, 0x46c38f2b, 0x129ff7b1, 0xbf905bdd, 0x023f3adf, 0x8cefcbe2,
-	0x5cfe8a3c, 0xe7c59593, 0xd04a79f7, 0xb9f0527e, 0x3f702acb, 0xf8103fc9,
-	0xcdf1daed, 0x6497e071, 0x43de02c9, 0x9efb24da, 0x7900cf4c, 0x82bedb34,
-	0xa26b296e, 0x6b13bf11, 0xbc0ff08a, 0x35a7655b, 0x9b4cfbf1, 0xa81deece,
-	0x661e63ce, 0x4565ddcd, 0x308bf3fa, 0xeec6567e, 0x7befa0c3, 0xfd212fd3,
-	0x7f4012e1, 0x13fbf390, 0x61a8fcf0, 0x42e20d8f, 0x827efc1d, 0x09cd0d33,
-	0xbe5969f3, 0xf0362fe5, 0x70e7ded7, 0xe2b52338, 0xdb654a3d, 0x83ffbc44,
-	0x0b709bce, 0x161ba7c4, 0xf7efb264, 0x8a6777d8, 0x67ff4cfe, 0x167cc0f3,
-	0xc8efc434, 0xb2727b14, 0xf583ebd9, 0x188b5535, 0xbbac9e2f, 0xbf0a6c37,
-	0x5f6f4c37, 0x712ab49e, 0x87cc04e9, 0xf3676a5a, 0x594fc6f4, 0x9f12c4df,
-	0x24b2df8a, 0xcfeb08bf, 0xc08126fa, 0x5a679715, 0x03c89e52, 0xcec89e3f,
-	0x44ac30e1, 0xcafda376, 0x6fe89fcf, 0xbe43dc37, 0x6cde5793, 0x4aeb3738,
-	0xfdfb6624, 0x77600997, 0xe0b1fbb9, 0x8a07d322, 0x1be5377d, 0x6f557c6d,
-	0x8d34e6e7, 0x41207fbd, 0xa77fb378, 0x55eec022, 0x06ff61eb, 0x7bb587a6,
-	0xe10c7909, 0xf52dbe90, 0x2947b81a, 0x3b068ffd, 0x7c02dbcc, 0x3cf80f11,
-	0x54fcf787, 0xd08dff10, 0xda20d15e, 0x927eb0fd, 0x95f01971, 0x70283762,
-	0x6cdf3c69, 0x91d7431e, 0x5f60d675, 0x3378874e, 0xcffa05f0, 0x2fbcfee3,
-	0x5357f40e, 0x8273c240, 0xa3bbb3ac, 0x60e4a816, 0x3e0379d3, 0x5bfcf37f,
-	0xd881e7da, 0x2dbde0cb, 0xef17e606, 0x28f7fbde, 0x9e6f4b90, 0x82f1c6ef,
-	0xbb4f4376, 0x6b91e118, 0x67718315, 0xc44c5db5, 0xb79003ac, 0xaa9a2d35,
-	0xbb77a131, 0x7213fb37, 0xb4f495bf, 0x1ec0721f, 0x11d8c311, 0x3e74ce1c,
-	0x6f48f809, 0xe36e5c57, 0x24c1e6f1, 0x6ca3ee1d, 0x18b71f3c, 0x8a6e1fbf,
-	0x7d472fb2, 0xaea5eccc, 0xbf1fa7dd, 0x13ef9e06, 0xe711fdd9, 0xb7a7e445,
-	0xda1e2e76, 0x2a5be2a6, 0x5f4f1139, 0xf9db3ff5, 0xd5ffed06, 0x4716489e,
-	0xa9979c97, 0xf50877bf, 0xf97871f7, 0x38f3b007, 0xd7b800ef, 0x2fdb07e9,
-	0xfafc3d1d, 0xc3da1b3c, 0x1ea0e981, 0x376bac46, 0xac5bfe02, 0x90d9d7f9,
-	0x00a3eadf, 0x33925e2e, 0xf3804c90, 0x7403927a, 0x7626a815, 0xb5b627f0,
-	0x97800c18, 0x98c98d8c, 0x9f89b3a7, 0xafaa2e57, 0xe8ab2635, 0xef3f1162,
-	0x877b293a, 0x1f9eaac4, 0x72f931b0, 0x6fe94f72, 0x43e34f30, 0xc61e1913,
-	0x31b06cde, 0xd18afb7d, 0xe866cd7b, 0xdf80c477, 0xfbdeed0d, 0xcfb85efa,
-	0xc761d178, 0x3dff8858, 0xbf607362, 0x6a9b7dc6, 0xf1b7cf20, 0x5452d013,
-	0x14286caf, 0x37de740d, 0xefc58388, 0x1fd0180e, 0x893dc60f, 0xf9f60e2b,
-	0x1bcf5f10, 0xf9cd062d, 0xdefc1bd8, 0x326d7bdd, 0x89b12fb6, 0x2dadc788,
-	0x37a07139, 0xbbeeac5a, 0x8e2fa06d, 0x12c0d5b5, 0x629f7894, 0xb03c4daf,
-	0xf4d19af5, 0x061d89cf, 0x71dba03b, 0xf61179e0, 0x484938eb, 0xd87a408c,
-	0x8f3c746f, 0x3a37bc7a, 0x1d7478d8, 0x2abf016f, 0xff9aa7f0, 0x7f5a34a1,
-	0x858a55a3, 0xfe052efc, 0xf9943eca, 0xb5c4f51d, 0xe4ac82de, 0xb8817ada,
-	0x3a5f92b3, 0x7f944ece, 0xd2e9012f, 0x6a3d7368, 0xda0ef663, 0x30f727d7,
-	0xae15e8bb, 0xe1524947, 0x829f8050, 0x8b1b7aa7, 0xe9eb2a33, 0xdbdffe6d,
-	0xca549e98, 0x9bd74bef, 0xe9178764, 0x0fcb1b66, 0xe6fd7877, 0x6b23c854,
-	0xcf7fc54c, 0xfb679549, 0x93e7a47b, 0x1b057bda, 0xf8060cdb, 0x8762ac0e,
-	0x6de68310, 0x20ebed1f, 0x48f5499d, 0x09878d7f, 0xdd6971f2, 0x48ee2c9d,
-	0x7fbf0de5, 0x81d1cf0d, 0x7a79f87f, 0x1396817f, 0x18afd69b, 0xdbf5f088,
-	0x7042af80, 0x65037ca2, 0xe811ad55, 0x5652d175, 0xe973f316, 0xc8dd6b45,
-	0x58eb459f, 0x5b1ee17e, 0x0ce7ae32, 0x886257a7, 0x27f9001c, 0x657f0e2e,
-	0x6e9c79dd, 0xd13c354f, 0xfa52f30c, 0x73e013fa, 0x4f63e352, 0x7a1572c3,
-	0xc641b53d, 0xb5224a71, 0x7cadf6e7, 0x18076dbc, 0x20dc4fbd, 0x5ffdc0e7,
-	0x0ec4bd13, 0x3637ec71, 0x7e41146c, 0x9cf401bf, 0xf41cf8cc, 0x0f3dc9ed,
-	0xf402fd46, 0x4081bb5c, 0x2315fcbc, 0xe2a2d929, 0x5febdd8b, 0x696ff0d5,
-	0x1835f55d, 0x158b6f97, 0x7c2bce40, 0x15fdc0ab, 0xe42af3a3, 0xfc74ebff,
-	0x2fbd953f, 0xdfb03b47, 0x9fff9c13, 0x9ff94198, 0x10d98a3e, 0xaf38c023,
-	0x07dfc318, 0xa40ff5f7, 0x6d5ca0bf, 0xbf5721eb, 0xcdb57266, 0xafe74a96,
-	0xe31bb6b8, 0x71f5c10c, 0xaa6279ba, 0x02c93742, 0x6296bfc0, 0x8bc01870,
-	0x99e815c2, 0xdfb7cdda, 0xd95c8690, 0x0f39e122, 0xf9e2473f, 0x0277ca1f,
-	0xe486bf0a, 0x6eb7c299, 0xd5d83473, 0x8056ab53, 0xe7971f5d, 0x253cfa45,
-	0x52c687b8, 0xf80a767d, 0x383c8c38, 0x57c7e5c1, 0xf762fbb2, 0x7a000fee,
-	0x221ea12e, 0x13ac87ec, 0xa51780ec, 0xdd8eb1dd, 0x5a3c3ac3, 0x2bbf9cd0,
-	0xef0c1ff5, 0x41fb8f40, 0x7c634787, 0x3c84603a, 0xa63e11d5, 0x839088c7,
-	0x570c40fc, 0x5b3e000f, 0xcdd7f544, 0x4a75fd2a, 0x553a45ae, 0x347970e0,
-	0xc55f5f93, 0x95ff7db0, 0xe21585d3, 0x2f73aa85, 0x024890ea, 0x605167e3,
-	0xf8c22e7c, 0xba4cf6a7, 0xdafde90a, 0x076ef4f0, 0xfe162aff, 0x48f5a73d,
-	0xec33319f, 0x13cb1df8, 0x46223392, 0xb0f91f63, 0x57f1bddc, 0xfd01d7e8,
-	0x46f7bf02, 0xff4025ff, 0xfbdd0c24, 0xf0abdd28, 0xa501d0a7, 0x55a26b8b,
-	0x174f41f2, 0x02a379ca, 0xe7745797, 0x33474f95, 0x9780b079, 0x66f25e8e,
-	0x60fcfd94, 0x81ec9f3c, 0xcf0cf9e7, 0x7c02be21, 0x67e1f22b, 0x3dafe117,
-	0xaf6c76d1, 0xe60174f9, 0x73f2d4a9, 0x9f3e7aab, 0xd1a5eeb2, 0x4b7ce682,
-	0xca34ee7f, 0x5a2bbee2, 0x48ea3e77, 0x34c7d10b, 0xd92ecf6e, 0xff73c268,
-	0x7802d02d, 0xbdfecddb, 0xbb3de56c, 0x0a4f0d44, 0x4cd115ea, 0xe1f42b8e,
-	0xc3246658, 0x55f2ffa8, 0xc86ee172, 0xab59f9ff, 0xdd346f37, 0x77a316c7,
-	0x07e8b5f6, 0xf182af38, 0xd833caaf, 0xc6241f21, 0xde201765, 0x7c0a2481,
-	0x33cd8fb8, 0x1979d52e, 0xe70ec9fa, 0x0f079038, 0xf8297c73, 0x9bd0e055,
-	0xaf0deb9e, 0xe27c387b, 0x8e5ebb79, 0x9efe7314, 0x5c5dfbc2, 0xe045788e,
-	0x2f711b27, 0x59fd6117, 0xe505fe4c, 0x73c11648, 0x727597c9, 0x5e9fe5e4,
-	0x91acbc8e, 0xc2da1323, 0x0bfa11ca, 0x1bf1ffcb, 0x4b1da216, 0x63b7870e,
-	0x3d334677, 0x93fa0f1c, 0xb2f78bf6, 0x3987def3, 0xc48a52dd, 0x0ddac9bc,
-	0x5713cc26, 0x366d90e4, 0xaf7f81c9, 0x16fa06d9, 0x1f76cd7a, 0xc5e70c9e,
-	0x9c074649, 0x03929f5f, 0xd453f788, 0xfa45af01, 0xc7fbc7c8, 0x0223c8c3,
-	0x47ef12f1, 0x9cefd083, 0x9f213626, 0x5046992c, 0x78deee7f, 0x4955d205,
-	0x74008a5e, 0x23175a5b, 0x54ec7b40, 0x94e401bb, 0x962b8fb2, 0x71b0c819,
-	0xd40707c8, 0x6f0ae472, 0xcdbbfe15, 0x49dce343, 0x47210c72, 0x33fb3d1f,
-	0x8da8bc75, 0x22f1d5d6, 0xfbe07f5a, 0x468e8bc4, 0x78801e07, 0xae6c3fd1,
-	0x94779876, 0xea28ff25, 0x912ac4b7, 0xc5d6e4a8, 0x4a1fb7ec, 0x2e3c952f,
-	0x34a95a45, 0x81c4d04e, 0x6073ab6f, 0x582bf81c, 0xe380c54f, 0x7870c34f,
-	0x7b5846af, 0x1fa3ad9b, 0x13e40b97, 0x97e8f882, 0xfc42255f, 0x063b9145,
-	0x2fe2ac7b, 0xa197900b, 0x037fdbf0, 0xd7b57d1c, 0x00008000, 0x00088b1f,
-	0x00000000, 0x7dcdff00, 0xd5947809, 0xe77df0d5, 0x24cb2d9d, 0x7642c993,
-	0x03bbec26, 0x4eb1ab09, 0x04906008, 0x8d441007, 0xb0900938, 0xd2910364,
-	0x208196d6, 0x2b188a06, 0x0eb154b5, 0x4551fa14, 0xdb1ab61b, 0x1a4013a0,
-	0xad563414, 0x61a5afd8, 0x80891d91, 0xe58ad3fd, 0x7bdce73b, 0x264ef333,
-	0xe79f6a02, 0xcdcf0f0f, 0xcf7bde5d, 0x773dfb3d, 0x79632d49, 0x9b19223b,
-	0xed50b390, 0xccc9a906, 0x831b163c, 0x43632f1f, 0x087a3e79, 0x6b9859e6,
-	0xf26b6320, 0x01de7975, 0x9fc75d8c, 0xa269fd3b, 0x678e3e15, 0x30d6fe6c,
-	0xb53349eb, 0x7fe1d767, 0x268c5d79, 0x649f595f, 0x9fc7d93d, 0x24bf8f9f,
-	0x4c33ffc1, 0x2b1812cf, 0xe1a7e263, 0x70ffdfcb, 0xdfc7b418, 0x54dec655,
-	0x805689dd, 0x12dcdca7, 0xd8ceddd5, 0x13c7f933, 0x52d491dc, 0x223ddf87,
-	0xb97178c6, 0x71debde3, 0x55de798c, 0x0fc816d9, 0x4a3d1936, 0x64e2fc34,
-	0xe8826b76, 0x06947e0f, 0x041967c5, 0x55437ff9, 0xfe97632c, 0xc5f4a3ad,
-	0x32f2b89f, 0x7a8afbe0, 0xb439639d, 0x185068ab, 0xd1cc62cb, 0x19cd7995,
-	0x4785d58c, 0x5fd0620d, 0xa748bece, 0x292fca01, 0x8329af66, 0x870800d1,
-	0xa23fc241, 0xd41b7d35, 0xd8983757, 0xca5ec86a, 0xe119ac61, 0xd9a23bd5,
-	0x077e3f00, 0x0fa67e1d, 0x6bca00cc, 0x630b2e1d, 0xff78c29b, 0x7b64c29b,
-	0xb483347b, 0xecd192db, 0xd7a7c004, 0xf40d1633, 0x6983c481, 0x036e92f6,
-	0x1f3099f4, 0x8018f33d, 0x3eadd94e, 0xadd2f115, 0x9163aed5, 0xadf471fe,
-	0x4ddbe68c, 0x6039d76f, 0xf7813afc, 0x543b4d9d, 0xd873e03d, 0x156ada98,
-	0xf728d2d2, 0xa8f3c458, 0x2c6aaaec, 0xa8f7cd8f, 0xa59f686e, 0x00b3ed54,
-	0xe678d85e, 0xcce502d8, 0x848f8307, 0x18d616fa, 0x2398d905, 0x2828ce2d,
-	0xd9c6751f, 0x1de60038, 0xf60a62ed, 0x1a32d8c7, 0xcba45fbf, 0x38b2fd85,
-	0xfd0052a7, 0x2307fb0c, 0x767ec8bc, 0xec568d36, 0xf35c6f00, 0xc01ec518,
-	0xe24d305f, 0xfeccf5ab, 0x73d7ec53, 0xba40e748, 0x7398ebda, 0xfaefb423,
-	0x2c31bf72, 0xd2bedfca, 0xb778d0aa, 0x46b9ddbb, 0xd879f346, 0x9c8fdf0a,
-	0x0067ddee, 0xf1cf8678, 0x03da33ec, 0x519733e6, 0x1e2d297f, 0x11d2479a,
-	0x8ba60e77, 0xcfd4312d, 0xc6be33a8, 0x4baed001, 0xca07cc15, 0x543f9ad3,
-	0x5569af10, 0x71d20acd, 0x825ed367, 0x3f79b537, 0xea11814f, 0x7201dd20,
-	0x8f301755, 0xcd1d16c5, 0xa145b163, 0x99c5e574, 0x7fa82e89, 0x6c5eeac4,
-	0xc79fea19, 0x62771cca, 0xbebff415, 0x7cfb5ba9, 0xb7bc027b, 0x278867c1,
-	0xab72dfd9, 0xb269fa91, 0xf3847fb8, 0x72de9cab, 0x476f7900, 0x48a39fd3,
-	0x88e21a2e, 0x8e8709be, 0x96123d13, 0x78a0ce00, 0x0a85a1fd, 0x85f5aa83,
-	0x23a53340, 0xddb8279e, 0x8899318e, 0xf89f806f, 0x09311ac7, 0x8c62f2f8,
-	0x91c706bb, 0xd91427ed, 0xb45f5022, 0xcf77c5e7, 0x598e652e, 0xfbcf003d,
-	0x6eb2778b, 0x12f77748, 0xbb7b7ba4, 0x21878f81, 0xb38b313f, 0xa4bbfb16,
-	0xce38e9b0, 0xf942984b, 0x979e064b, 0x95abfaf8, 0xeb11ebe3, 0x7896c5a4,
-	0xf02b278e, 0xbc614bf1, 0x7a1eb05d, 0xb3bfcad7, 0xcd617e0b, 0x1e705f9c,
-	0xbb64bfa8, 0xdbdfa2dd, 0x3d5cee9d, 0x08cd93e7, 0xde11c8e7, 0xc3b7c87d,
-	0x90fb3cf3, 0xe098d3ff, 0x27ce3c93, 0xcfbefcc1, 0x467ea36a, 0x8865699d,
-	0xb9852cf7, 0xd32ee902, 0xa1ae10d7, 0x89a3dfc8, 0xb61e407f, 0x52c378e3,
-	0x800354aa, 0x13acc712, 0xdec67758, 0x5da9dab6, 0x3ee708e6, 0xd3ab37e4,
-	0x207cf245, 0x2be54ac2, 0xc07f3833, 0xfc407ff7, 0x2ed3cb05, 0x7e01a394,
-	0x7e438a39, 0x8fc8ec8c, 0xbcf013bf, 0x63a5e42d, 0x613feeff, 0x3acd71ff,
-	0x0c9d02a7, 0x65e9123f, 0xa2f874d0, 0x8fe1152a, 0x00ffc063, 0x358e6da0,
-	0xa52ce507, 0x5d20a1cc, 0x875c229b, 0x230fd4ad, 0x4732b9bd, 0xef86ade7,
-	0x893b46e6, 0x3ed8df7e, 0x366667ec, 0xc01f6fcc, 0xe115fc1e, 0xb6b07b03,
-	0x6ff4f508, 0x3d4469ff, 0xd7f2976a, 0x38a22434, 0x48ae3f80, 0xf7a7e0bd,
-	0x410bd271, 0x73d60ef4, 0xebf6f4c1, 0x039ead05, 0xf4e05d7c, 0x9f226770,
-	0x522f35c5, 0xead07eb9, 0xd1e8ceb5, 0x3a083f41, 0x7e708a5c, 0x0c5cf881,
-	0x7ae38832, 0x583eb346, 0x0e1d99de, 0x76a4898b, 0x1c3b45ff, 0xd1df1316,
-	0xadcceb0e, 0x47c01507, 0x576a8379, 0x8fd50a61, 0xff489cd9, 0x8714eb17,
-	0x41a4e509, 0x71787e25, 0x4bd93865, 0xbb67ef09, 0xdbb107a3, 0xcff21520,
-	0x8ec9dddc, 0xf188c656, 0xf18790ed, 0xd679592f, 0xc5277568, 0x1793e804,
-	0x4308be1b, 0x644ff73c, 0x62c64e03, 0x0ed6a70b, 0xf0290883, 0x537f09bd,
-	0x6b83af10, 0x69ac1454, 0x95269dee, 0xfb1dd6e8, 0xfe5ace1b, 0xbd700d9c,
-	0xceb46dbc, 0xf537c81d, 0x05ec6757, 0xb8232bf8, 0xf7b4be5d, 0x33e42f5a,
-	0x92f77f59, 0x3f7bd262, 0x13192b07, 0xeedf1fa0, 0x61eb8273, 0xd53d6856,
-	0x2a76871f, 0x850023d7, 0x7a3ee651, 0x70d427f4, 0x27f5aa87, 0x7baa3988,
-	0x7f107e02, 0xbf84e18d, 0x77209eea, 0x48e70419, 0xc5bf7fec, 0xfca092c8,
-	0xb623c80a, 0x037f7093, 0xe2074778, 0xaa6f0fd1, 0xe08454f5, 0x5f0fd50b,
-	0x0e905d3b, 0xd16abfd0, 0xb12e3cd3, 0xb3d20770, 0x4864e8ce, 0xe151cf7f,
-	0x55ba081f, 0xd4bb9e08, 0x1b88f430, 0x91e2f7e6, 0x7f7e0754, 0x984afea9,
-	0x46fd122e, 0x979c14f7, 0x851ad69a, 0xc35f70f6, 0x032dbe95, 0xc54dbf48,
-	0x4e872bf2, 0xbe03dcd8, 0x8466fcd1, 0x7e7687a6, 0x9ac8fa95, 0x6150ff40,
-	0x7cc17e7c, 0xfe3434a4, 0xf244194b, 0x7a1f50c7, 0x1ab799d2, 0xa072bde6,
-	0x997ba7e0, 0x983ee51d, 0xabab46de, 0x6e402622, 0xaaed15ff, 0x9c70b842,
-	0xcf342194, 0x741f9885, 0x41a66678, 0xc31bf387, 0x7f4a6ed0, 0xb0effd0f,
-	0x4eff7e21, 0xfe7dafce, 0x3a0daf3d, 0x3fbe68c4, 0xf80071c6, 0xaf803ae5,
-	0xeac18c12, 0xfb79c08c, 0x62e51e88, 0x48e6e57e, 0x61f30a9f, 0x5a170cbb,
-	0xd6e81ea4, 0x4fa07e11, 0x19e7c20d, 0x46e238ed, 0xd235fefa, 0xd1f88d51,
-	0x5fd15b37, 0xc6acf985, 0x28a2367a, 0x2fdfe711, 0xf505b9d2, 0x18cb4bfc,
-	0x57a5f3f1, 0x4c137798, 0x1d7efb76, 0xd646cbf1, 0x9fbef88f, 0x570cf2ee,
-	0x3af3c924, 0xb9ab3b84, 0xb77a8756, 0x43aed7a7, 0xb9b7da7d, 0x3e23a74e,
-	0x8622ff70, 0x5799e4fc, 0xff5f00f4, 0x37ea556d, 0x686f07e4, 0xaf40ef7e,
-	0x92f481cd, 0x7c16cb78, 0x43788d90, 0xbfaad083, 0xe3f662d0, 0x52c3e80d,
-	0x63fb1d6c, 0xf11d25ac, 0xe9faf8d4, 0x5fd02d5e, 0x67a71bc5, 0xfe2a5e20,
-	0x18262260, 0xd1be87f3, 0xe59fefc8, 0x2e67f684, 0xe872ad2c, 0x257a9fc1,
-	0x85d91ba6, 0x446cd632, 0x6ebca13f, 0xa01f4381, 0x76ffa5cf, 0x8f9cd0c8,
-	0xaa1a1ffd, 0xe78065b2, 0x5de18e2b, 0xd13b0858, 0xbfa12fee, 0x472fb006,
-	0xafcf11d8, 0xff734567, 0x20f646d1, 0xa5a1fdb8, 0x7a631c73, 0xa1dfde74,
-	0xbdd361c1, 0x907e7df0, 0x8634741f, 0x18b6b5db, 0x2141876e, 0x8bce113b,
-	0x3d78b7bf, 0xc8717450, 0xfd0c5147, 0x641f5dcc, 0x2e8f807a, 0xfe47e6b2,
-	0x35767288, 0xf971d692, 0x5cca3f83, 0xe5cbf166, 0xdcf8231d, 0x70ed78ef,
-	0xe7da1d94, 0xe717df6f, 0x1ddfc009, 0x9db57f4c, 0x5c7033af, 0x7d33e346,
-	0x07a42f4b, 0x04d9e3fb, 0xaff9a43b, 0xf9c715bf, 0x74874120, 0xdbf4245e,
-	0xc028b0ef, 0x525fcedf, 0xf3247c41, 0xe6666de5, 0xebc80d8d, 0x04b88d9b,
-	0x648b6f2e, 0x37b7685e, 0x7a4712c6, 0xa3259926, 0x5f14e99e, 0xe0cf8937,
-	0x43cf8972, 0xa3a6cf83, 0x2759f15f, 0x1b6f70fe, 0xf7ced76f, 0xd74fc14b,
-	0x7ceff3fb, 0x0aec3ea5, 0x8d845df1, 0x638ae9d3, 0xf7f41764, 0x1ebe8df2,
-	0xe4ed10d6, 0x4f1832fa, 0x8d2b5f6f, 0xdf7f7ec0, 0x050bca66, 0xfba6de97,
-	0x21ca7e76, 0x1fc02a80, 0x53baa6dc, 0x9c1fc26d, 0xbe8af90c, 0xbad1c657,
-	0xd08bf25a, 0x4f30777b, 0x306fca23, 0xf77a487f, 0xfadd01b0, 0x296672a3,
-	0x318bb748, 0x4237ce76, 0x047ca41e, 0x9d3831e3, 0x50ee6460, 0x62af80eb,
-	0x98c35e24, 0x23e1f407, 0xdf640d1b, 0xf8fb5f0f, 0xf7e04cde, 0xd60c1bd3,
-	0x9ce430e5, 0x3ea5f617, 0x0673f503, 0xe40aac9b, 0x3d7ddb4f, 0x5f4bee50,
-	0x0fc85d50, 0x923c37a7, 0xf3d21330, 0x0065bf20, 0x0346e947, 0xf8d9cf95,
-	0x159f9528, 0x42fa5d72, 0x97d47f7c, 0x4eaff787, 0xf9ce3a40, 0x486989ea,
-	0x6b46ed97, 0x9690c1ff, 0x631c536d, 0x6f3df002, 0xbf269873, 0xe0e6c75d,
-	0x995d243c, 0x47af6ee2, 0xa6d53f13, 0x1f7176fb, 0x04dfd69f, 0xa0aa72ff,
-	0x3029c4e3, 0x57a18aef, 0x77dfafc8, 0xc9ec9c20, 0xf92a919b, 0xffc1be8f,
-	0x20db9def, 0xde95fb9f, 0xa09dbe41, 0x674158f3, 0xb7a45cb0, 0x9f3ccc4b,
-	0xfc9ebafb, 0x4a8b5ccf, 0x91f686f8, 0x7bfea163, 0xf40fbda2, 0x5321ca2c,
-	0x848dd7b3, 0x0da36376, 0xf7d0ed0c, 0x19f2f37c, 0xdb3bc9d8, 0x025bc7f4,
-	0xd59a33e6, 0x387f41f6, 0xca821987, 0xcf2c7a9d, 0xc7cb6b35, 0x2cfbb8f6,
-	0xad630ffa, 0x77c972da, 0xfab4d88f, 0x7381df62, 0xf3009b3f, 0x92a4392b,
-	0x7d237cff, 0xafc22efc, 0x5dbf3a47, 0x3bbe0db8, 0xf872b02c, 0x4915e9da,
-	0x142357c8, 0xd3acf186, 0xe3cb42d7, 0x665ea41f, 0x7e3edf40, 0xe63816fa,
-	0xdc51e7b6, 0xa0b119ef, 0xdff08f3d, 0x7afb1ebc, 0x8d9b753d, 0xed8233c7,
-	0xfcdcb046, 0xfe46ecb7, 0x3dd2b7e0, 0x837f4a16, 0x5ced85e9, 0x89eb06ef,
-	0xe1213b60, 0xbcb7860a, 0x0fb1a74d, 0x191ea15f, 0x8c27681a, 0xc3be2764,
-	0x6d8370f5, 0x30f5c768, 0x2f8431f8, 0xad3d30cf, 0x6adfc1c3, 0x220376c4,
-	0x0039b1ed, 0xb76b0ad2, 0x167fb208, 0x405b7ef7, 0xb6ffaa1c, 0x8dea1d5a,
-	0x418cf8f6, 0xeb91a71b, 0x9d8477d5, 0x1cfa13a8, 0xceb4abd6, 0x4eee18df,
-	0xc9b8e3d4, 0x8c96c746, 0x48f9f88e, 0xcfccefb4, 0xbeac7e95, 0x8fb1fb86,
-	0x389a5d58, 0xa893eb19, 0x5fa2fb89, 0xd9edf28e, 0xfcf34e1b, 0x420d7154,
-	0xe733d439, 0xf4016ddf, 0xf87036a9, 0x8f89e183, 0x319276e5, 0xb207f917,
-	0xd0e8f67c, 0xd5895c7a, 0x679cfb53, 0xff474fef, 0x07c6d3ed, 0x7ebf51d2,
-	0xede7141a, 0x169e1e4c, 0xb0a4faf2, 0x2e223123, 0x11ca14f0, 0x9dda41e4,
-	0x55fbe1db, 0x57245d4b, 0x9d3a5d3f, 0x2e9667d2, 0xb613faa1, 0x9adf1a0c,
-	0x775767f3, 0x35c9d3c0, 0xd989d92a, 0x18af5746, 0x59a4eef8, 0x1385f147,
-	0xbb799155, 0xd19cb122, 0xb3f6727a, 0x0278b613, 0x6c277ee2, 0x6743a27a,
-	0xfd8f8cf3, 0x9cbdfa66, 0xbda144b5, 0x23d7e76a, 0x2db5ec1d, 0xac7fe316,
-	0x55db0125, 0xb6bdcd2a, 0xb7c71d29, 0x2c7c6732, 0xf59197f2, 0x0ba9b947,
-	0xb828f6e7, 0xe72c4a5d, 0x1fa1bfc3, 0x8a7efd0b, 0x9e842b76, 0x2f3a0bb1,
-	0xb1ed38b4, 0xc922efa4, 0x81b8275f, 0x728cbe5f, 0x60b84776, 0xd313d65d,
-	0x7c785d61, 0x2ac5b16e, 0xf0a9c3f8, 0x5fab8e75, 0x5bf8886c, 0x609ef167,
-	0x7811de38, 0xc9038e0d, 0x8681c654, 0xbcf9f2c6, 0xe26ab36d, 0x0eff1842,
-	0x79f9ff15, 0x1ba3d72c, 0x2a3c5bc3, 0x7c03c3ca, 0xdb25de3d, 0x2b7c60a3,
-	0x0736bf25, 0xc5775fe3, 0x2da5b8f2, 0xeb889dcf, 0xa344e4f6, 0x3736e303,
-	0xea038f2b, 0xc05f7c9c, 0xd63823ad, 0x7ac27b37, 0xcd095c01, 0xa4231cee,
-	0x0d317153, 0xaac2edf8, 0xa0dd2196, 0x6b23211d, 0x9157b87f, 0x92686c8b,
-	0x4028f429, 0x6772861a, 0x454f728c, 0x559b0cba, 0xfa718d55, 0xffbe3294,
-	0x77715670, 0x9c9f01b5, 0xa43c2b7d, 0xe8225c3f, 0xc9d194cf, 0x36b3fa68,
-	0xacae081b, 0x819f3fcd, 0xf9b59f7c, 0xa012bd2e, 0x1ac79687, 0xdf67fe68,
-	0xe295d79a, 0x58989f16, 0xea7a10cf, 0x1e5f8287, 0x69d87410, 0x8b7fcd0c,
-	0xac6fbb45, 0x55405bcf, 0xe2f9f569, 0x5b3880d8, 0xd265f945, 0xed6393e7,
-	0xfaf3ce34, 0x80c903ba, 0x3167e7cf, 0xe68a0787, 0xf148dd6d, 0xbac69dd7,
-	0xe4efb8f1, 0xa431d0a9, 0x7f03fefb, 0x7e8c9038, 0x60fb2ce4, 0xbfda23f4,
-	0x4ad2f43f, 0x0e7e7f2c, 0x4ff88c1b, 0x60ad3ef2, 0x619fe63c, 0x7faf84b5,
-	0x65b1316e, 0xbf7db718, 0x210ffc6e, 0xc74cbebf, 0xcf04bf50, 0xe832461b,
-	0x19f53112, 0xfd382374, 0xba4a0f51, 0x91190303, 0x886e921e, 0xee90edbf,
-	0xc11af2df, 0x2a9ae12f, 0xb6f3dee2, 0x7c8f1f6e, 0x53665c92, 0xe1204e30,
-	0x793d91ba, 0xd9dbf631, 0x0ed0ef93, 0x221b12bf, 0x0ec21d2e, 0x610d88ef,
-	0x2fed8387, 0x637738b3, 0xe1d91bbb, 0x36ff82e1, 0x7fed06c6, 0x08597ee0,
-	0xed8d0dba, 0x1fdf0f10, 0xe3ff621b, 0xdef0f146, 0x43ff72b1, 0xc97f0f1b,
-	0xad6ff5c8, 0x293c3d8d, 0x1374bc84, 0xb5d6ebe3, 0xc67ed11a, 0xf5212835,
-	0x518b62d9, 0x1c7e1fee, 0x125fb01b, 0xe0438fac, 0xefb628f7, 0x17b7cdbb,
-	0xe9890d5b, 0x5bee8111, 0xdeb0ebbf, 0x29ce310d, 0x22fb3f81, 0xf6a6fb46,
-	0x0afa462a, 0x141e5ef2, 0x371429f4, 0x934f38b0, 0xbec1badd, 0x1cd69dd5,
-	0x3ee483f2, 0xd6ab54d5, 0x938b8c4f, 0x239f9ced, 0xd89d699c, 0x3c097f89,
-	0x70dbfcc1, 0x4c45b8dc, 0xf7231fb3, 0x3caae261, 0xcd0b318a, 0x6af8a311,
-	0x32f758d7, 0x1d6bb403, 0x209b1cc9, 0xcd685d1f, 0x9b6a7d41, 0xfdc468e3,
-	0x7917959a, 0x02e57e3c, 0xfd4e5de6, 0x7732f9f0, 0x17ca2f37, 0x2e302dd2,
-	0xe1c71110, 0x72e38888, 0x1cd27606, 0x8f0ae1c7, 0x9293b00b, 0x3e75ba1e,
-	0x1adae895, 0xd0054eda, 0x77df46d5, 0x50efd742, 0x3771ed2e, 0x8cf71fe7,
-	0x19be05bb, 0x7c737718, 0x4b4c14f3, 0x8f04dfec, 0x0ff38997, 0x2cf80f1e,
-	0xf826ee2b, 0xee2deaec, 0x50881e8f, 0xa5dc5dbe, 0xc4275e23, 0x6b77d085,
-	0x487d75f2, 0x4770b35f, 0x233abb28, 0x7dbff22e, 0xa086645e, 0x179d2df7,
-	0x2d27f179, 0xdcb3a446, 0x06f090f7, 0xe591139f, 0x264a0d15, 0xf6733fae,
-	0xc075a35d, 0xd37fc6a5, 0x79e3a03a, 0x42ee3e0f, 0x678003e4, 0xcea03aac,
-	0x7977f207, 0xea56919b, 0x22ffb32a, 0x4df6e31b, 0x53b5e606, 0xefb6337b,
-	0x7efb78c7, 0x633656db, 0xd31faadc, 0x547ac47b, 0xa8fdceb9, 0x7ee39468,
-	0x8d5b2a4d, 0xbebcadf9, 0x6197998a, 0x847a3a5c, 0xf003d98e, 0x670ce319,
-	0xc67c00f6, 0x7934d9e6, 0x2f9e4eb9, 0x25778dc6, 0x32efbe6b, 0x7da69bbd,
-	0xa69fbb92, 0x10ce653e, 0x6aad3e4d, 0x577da694, 0xf981cfb0, 0x9addcf0c,
-	0x266bddf6, 0x6b3df26b, 0x3fb4d01f, 0xcd9eaacd, 0x9c7a79c6, 0xce003dcd,
-	0xdece0259, 0xdf358beb, 0x0dd5d7f5, 0xf920a1f3, 0xffee1f14, 0x326c16cd,
-	0xfa73c44b, 0xfa69e77a, 0x5e6aff3d, 0x9df80293, 0x19386b5d, 0x7c219f18,
-	0xea4b7e00, 0x8c1cf615, 0x5b5eba5b, 0xe9e1a73f, 0xce902995, 0xe7cb6af5,
-	0x829cbee1, 0xdf2dadfc, 0x823d73ad, 0x71ed9deb, 0xe228ce22, 0x7f03ac3d,
-	0x97b8d244, 0x9778f037, 0xc41de9ea, 0xb13a5a1f, 0x762fc96f, 0x44a62fc1,
-	0xd984bf2d, 0x7a52fcb5, 0x1f30e770, 0x88ff88eb, 0xe47c413e, 0x78017f81,
-	0xf895f897, 0x7cb438b7, 0x9de15df5, 0xdb91af31, 0x3ff96d0d, 0xb5f1b4e2,
-	0xe3ee917e, 0xd4aeb7a8, 0xbf71522f, 0x7df1e58d, 0x57f52bfb, 0x6bb21d07,
-	0xdb3ad7f6, 0x17173a4f, 0xfb175718, 0x3f709749, 0x137636f1, 0xfefb89fb,
-	0xd900f885, 0x1f801b77, 0xb98708d8, 0xcc30ff7d, 0xac147fbf, 0x760a6537,
-	0xb238cbe3, 0xd77dfe27, 0x587af86a, 0x085c5ff4, 0x9387dcaf, 0xf9e472e7,
-	0xe7c91621, 0x3c01fb29, 0xf143f1a8, 0x022d9ffc, 0xf7dbadd7, 0x96f5a42f,
-	0xc4c43f3c, 0x7e10bfb9, 0x3aefe93f, 0xfc8935fc, 0x6e78f081, 0x6d3123cf,
-	0xf9c407f7, 0x3bcf692e, 0xb7ee47eb, 0x7b2a9675, 0x6c3fda55, 0x9b1dc255,
-	0x5e93d842, 0xfd72dff1, 0x1c43a675, 0xe07c57ba, 0x2bd1ebfa, 0x00aed007,
-	0xb962fbde, 0x5af602c5, 0x5febdbf1, 0xbf114444, 0xbd541eb6, 0xb2e0a1bd,
-	0x036d1ed9, 0x6984363c, 0xab4c88ed, 0xf403c9cc, 0x3daf58b1, 0x11f727e7,
-	0x6367db83, 0x27fd80fb, 0x8fe34ef8, 0xfdc21cac, 0x6e78ecb5, 0xe488bfdf,
-	0x9114c1fe, 0x175a0caf, 0xbf70d655, 0xe9f8236c, 0x4cfd010d, 0xfb50b789,
-	0x533911a5, 0xc08e29e2, 0x332bbbd7, 0x5627f214, 0x21f90a2a, 0x5347a267,
-	0x9cb8b5fd, 0x623fc4c9, 0xbbe8299c, 0x6edaffc1, 0x38bb1e1c, 0x37fb238f,
-	0xe6f6f3c7, 0x4e94d1f8, 0xb88ab789, 0xf21fb5b3, 0x93846547, 0xa1aa35fa,
-	0xc7a6a5f7, 0xb5ad79f3, 0x6a27e930, 0x84e3fee2, 0xbf38c4de, 0xf9a3fb89,
-	0x71fc1363, 0x7f66a67e, 0xf1138c68, 0x773e857d, 0x53ba9ea2, 0x78b3bdd0,
-	0x758fb3bf, 0x75276e3f, 0x12fbf78c, 0x1dfbc643, 0x0fde28e3, 0x5e71ea5f,
-	0xa47f71c1, 0x2fcd8443, 0xb7c48f3f, 0xd45483db, 0x7746f54f, 0x5abbae35,
-	0x0eff8377, 0x2dbc7dc5, 0xf0301fb4, 0xae077750, 0xb06656af, 0xb7e416bd,
-	0x7fa18c65, 0x5ba2df5f, 0x6bf5061e, 0xf58acc3c, 0x75f03723, 0xbb7ae95b,
-	0x8069a703, 0x8865b075, 0x8bac1f5f, 0xd7bc218f, 0xc46e4cb7, 0xf73581fd,
-	0xa19a1b32, 0x1b9b565a, 0x06d0fe85, 0xf8dd7216, 0x09b39094, 0xd4557b39,
-	0xdfe8f117, 0x53d3a087, 0x0fa04e82, 0x879d22d6, 0xf0afbab7, 0x4fae38fd,
-	0xfae22548, 0x1bcebf74, 0x373f3d6a, 0xf21d773a, 0xe86f40c1, 0x0b5ac3f5,
-	0x1175b7e7, 0xdda8e7ae, 0xb5ee7e2e, 0x59dfea54, 0xba07a63a, 0x9d74114f,
-	0xdf9f81b2, 0x5faed760, 0xc89fa557, 0x7a867fa8, 0x8b5ef4a5, 0xa543e317,
-	0x821e190d, 0x7a38a5cb, 0x7868bea2, 0xd2f985df, 0xc62b2cac, 0x657f9c23,
-	0xe43ea9ca, 0xbfae3262, 0xd494ecf4, 0xe3c76427, 0xb269df68, 0x16b5b7e0,
-	0x0d473f3b, 0xfc008e28, 0xb6586e97, 0x7cefcf17, 0xfb466bf4, 0xd6d4474b,
-	0x54d9d861, 0x2192ce40, 0x2159ea98, 0xfef82bc5, 0x1fa2bdd5, 0x5c61bfcf,
-	0xa9dc7fb3, 0x3e69070d, 0x63cc0c47, 0xb4ba3e06, 0xfa3b3ee7, 0xcde32bdb,
-	0xfb93c714, 0xf75547b2, 0xf48464e3, 0xda0815ad, 0x56110dfd, 0x43fc7f8c,
-	0x82465df0, 0xc7d21f7b, 0x057c7cbd, 0x6596c1da, 0xa3c474a6, 0x1a92797b,
-	0xd7ba7007, 0xd1ef342a, 0x788c93cb, 0x8ae6617e, 0x4f50e3c1, 0x95ce610d,
-	0x2879df18, 0xd3948596, 0x9d7cf1f3, 0x60655c58, 0x849a68c6, 0x172fe311,
-	0xbf8a146b, 0x015bfee0, 0x988e67d0, 0xf7aaf95f, 0xec3f88a3, 0x1e186ff0,
-	0x733fe5cb, 0x1e494aaa, 0xe46bcec1, 0x19d58ca7, 0x799fa093, 0xdb39606b,
-	0xf1fdec8d, 0xc043fe0e, 0x3af2ef79, 0x5b257d6d, 0x7f9d39f3, 0x5befe061,
-	0xeb682ed0, 0xe8f2953f, 0xaba40e60, 0x8cc5b17b, 0x0b4684e7, 0x51ad14bc,
-	0x665fa8ac, 0xbf8c68ae, 0x9b33f20f, 0xb4f20754, 0xe8eb0bc4, 0x8f39d3ef,
-	0x693d4dcb, 0x6ed9703d, 0xdced82ef, 0x2bff5c51, 0x2c70f77a, 0x3dd6287f,
-	0xadf1d71c, 0x9e18589f, 0x06d6399b, 0x1ec618fe, 0xc5106ccd, 0xd06cac1f,
-	0x5a3b00a4, 0x6026b064, 0x16c3dfbc, 0xb7be3226, 0x779c0e65, 0xf90d79a5,
-	0x07e89581, 0x1f91f9f2, 0x672c50f8, 0x15d7d6d5, 0xeac39f3a, 0x9a07e40d,
-	0xd6781f85, 0xae009b5e, 0x6e3d7317, 0xde2d3920, 0x687e4316, 0x235c8af1,
-	0xaef16ff2, 0xe043d218, 0x63d87e07, 0xc78e9f98, 0x481e6456, 0xeb8b7e84,
-	0x96aa1c32, 0xb8ff5a7e, 0x5ba498e6, 0x4b4fbf47, 0xe8a193b7, 0x94d2f406,
-	0xff0824a7, 0x3d8bd04e, 0x477e4b16, 0x7ab782e1, 0xcb9e019a, 0xee746155,
-	0x83ff33a8, 0xbed1c6a5, 0xe6175c9e, 0xdfafb725, 0xcafcdf68, 0xb744a19a,
-	0xfde57a60, 0xb470e667, 0x16afec27, 0xa1ec7a86, 0xc9e1ecee, 0xc2b0fe50,
-	0xeaa1ebe5, 0xa72879f1, 0x6f5c0959, 0x6614b7be, 0xfdec6468, 0xece666a5,
-	0x4b07d8c5, 0x68ff94ad, 0x3fe52269, 0xf4a76a5e, 0x287da593, 0x68e2293d,
-	0x0180ce52, 0x25475f88, 0x951af970, 0x6cdee220, 0x8caa2251, 0x307cffbc,
-	0xa1c56754, 0x4d8c27d2, 0x271eec63, 0xdfc02320, 0x046f7e99, 0xdf3db912,
-	0x4b8eb062, 0x9571ff44, 0xd8befa42, 0x3da6bb75, 0x3c4625f8, 0x64facdff,
-	0x9ce9cbfa, 0x1938dd98, 0xfcfef0f8, 0x69fb4d58, 0xfc9a2935, 0xcd3b04e4,
-	0x775e527b, 0x8503f94d, 0xa2f935fd, 0x9e024036, 0xf8db302f, 0xb7d8aafe,
-	0xd7c6cc67, 0xf6de56eb, 0x2ef0d56a, 0xaf7807df, 0x7d50321e, 0x5d243d30,
-	0x31d7ad67, 0x73368037, 0xfa0dcc3d, 0x933b593d, 0x11fceae4, 0x95fdd90b,
-	0x1ddf32db, 0xdb63f901, 0x7ebfb40c, 0x5aec456c, 0xb63e3fdc, 0x418a3e2d,
-	0x32a95eea, 0x7ac1fa1f, 0xe80591ab, 0xcb15dcb7, 0x9156fce8, 0xf940e4d7,
-	0xf9efda2f, 0xd1dbcc95, 0x5120441f, 0xbd543e3e, 0xe7e8853e, 0x14befc24,
-	0xf902dde6, 0xf1afa033, 0x16ccf8c8, 0x8519d70e, 0xd9fcc0ad, 0xfaf5bfb0,
-	0xb171c03e, 0x8744b6a0, 0x50f501eb, 0x1dcbe93c, 0x2dbe432a, 0xfda0605c,
-	0xa91fb9bb, 0x94cf311b, 0xde9c2921, 0x64479d2a, 0x7fa8992f, 0x021c0ad6,
-	0xd6fd16ed, 0x77d689b4, 0x0f77e44c, 0xfc16aef4, 0x26747c89, 0x08633986,
-	0x3de08558, 0x46fc7ef7, 0xd3e3f7ac, 0xfde7083b, 0x32b5dea5, 0x5cebf801,
-	0xe9107789, 0x49e2c7b5, 0x7ef182ae, 0x96f5c8d2, 0xf140e507, 0x9cbf4beb,
-	0x9d3e272d, 0x38247069, 0x25655f48, 0xb93abea1, 0x98e740c6, 0x3519de99,
-	0x3b3fd689, 0x38e58f88, 0x71f6f527, 0x9ac9df08, 0x96fb860c, 0xf2546bc5,
-	0x78ff9007, 0xffe72f7b, 0x1b3755a7, 0x28d6fd0e, 0x23a5d66e, 0x60b23cdf,
-	0x9a639d38, 0xc141d621, 0x9033e07a, 0x7f2f7755, 0x7e1ede7e, 0xb56586ce,
-	0x181defe8, 0x7c158f38, 0xbfde44bc, 0xd650073c, 0xd1474fed, 0xd4dcbee5,
-	0xf0ed1a3d, 0xe2550fd9, 0x6addb3b3, 0x3d022587, 0x0ef6e82f, 0xcfe43efb,
-	0xe94e7817, 0xb854ff21, 0xae02677b, 0xd26b7457, 0x3e786e95, 0xdbdac4f6,
-	0xaf73bbe1, 0xe6241c18, 0x7f49e24b, 0x6e697bcc, 0x8ef3c0d7, 0x2f97f51d,
-	0x38bfef99, 0xe7c01493, 0x38dd7b7c, 0x775c00eb, 0xe21d84bb, 0xe6e3b1f8,
-	0xbac5e02a, 0xc343c14e, 0xcb50c4ec, 0x3d773c6a, 0x3024c413, 0xec42784e,
-	0x7a101f8f, 0x1109fa45, 0xa67e785d, 0x7b37f38e, 0x0dbf2155, 0xbffa347e,
-	0x944f9c52, 0xebea5f7a, 0xfb4b5632, 0xf81247c1, 0x8ab9c639, 0xe055da97,
-	0xa8a82ece, 0x420f2b12, 0x79356d97, 0x97d419bd, 0x480fd035, 0xfbe762ee,
-	0x9e57c643, 0x652db645, 0x417e7ccd, 0xbc19ceed, 0x1d19cd25, 0x75894ded,
-	0xf51b0ae3, 0xfc60706f, 0x69c854a4, 0xf5e2ad79, 0xdd9079f1, 0xd98af194,
-	0xdb066ec2, 0x28f60ea7, 0x0ecd0ec8, 0x56acb3b2, 0xde01576b, 0xc2471c48,
-	0x2ba70c1b, 0x987842c2, 0xbda17007, 0x0f7b712d, 0x15b8244c, 0x03b25007,
-	0x35cca53c, 0x01e70626, 0x477b3ef5, 0xd5e782f8, 0xcf315e01, 0x1c4bb860,
-	0xff70fb9f, 0x5187cf18, 0x1e6829bc, 0xfec11e92, 0x894ba49a, 0xa4b7e387,
-	0x7e7a2141, 0x3207eeda, 0x7e491b8a, 0x9d500581, 0x44d77bf6, 0xeba567d4,
-	0xf866ff40, 0xd3f247f9, 0x8517563c, 0x7cc152fc, 0xbe50932b, 0x46d3757c,
-	0xe1bedfa2, 0x49ca237d, 0x53d7cda1, 0x5c288317, 0xb4bcd3fb, 0x1044f580,
-	0xd7446f9e, 0x9c378a6f, 0xbdc65e95, 0x37b34f00, 0x41b0ceab, 0x1ce2769a,
-	0x60e48791, 0xc463c78e, 0xb11cc6f8, 0x9c11bfee, 0x6e7e7a95, 0x76f086fc,
-	0x5b7d27e2, 0x68baf3b8, 0x9fbf62fd, 0x943a33d5, 0xaff76a9e, 0xdffaec82,
-	0x217e3c0c, 0xbd55f1f5, 0x5025e293, 0x2aaefc2e, 0x079b8f2b, 0x2cb4f1e9,
-	0xc225e3d2, 0x4e71cbae, 0xf149dfad, 0xf768d9b7, 0x5d3fca03, 0xfee293b7,
-	0x476657c6, 0x6a7dffa1, 0x78b5ccfd, 0xb6d4ebbe, 0x4be76499, 0xde76939f,
-	0x1ff40c6d, 0xbd17d772, 0xdfe463f8, 0x9f1461ad, 0x16efd92f, 0xabd01eeb,
-	0x9ebeced0, 0x8eb651eb, 0xb452d5eb, 0x1ec80387, 0x8b76c6f6, 0x51bddc4b,
-	0xc9ca020e, 0xe99e2e4e, 0xe81eddfe, 0x11cbf177, 0xc2a10f0e, 0xdf91d3ea,
-	0x3da1f56e, 0xf1f85f2c, 0x0ee73c51, 0x1fa3fff6, 0xd90ffb48, 0x92f77a8d,
-	0xc26f282e, 0x1bab97ee, 0x27e8add3, 0x5ff13b08, 0x3439bfc0, 0xfe1087fe,
-	0x01ff118b, 0x6bc720fb, 0x06679e38, 0x1ac4ffe1, 0xdb95974e, 0xfae147ba,
-	0x774d78f1, 0x6f8eb3f2, 0x9ff849eb, 0xcff01ab5, 0x3f5a5fe3, 0x8ff006ab,
-	0x3fc408eb, 0xdfbc5bc0, 0xe0eff02e, 0x78e1aff8, 0x3a786b67, 0x3d9e03ab,
-	0xf1618e74, 0xf40e4daf, 0xf984ce1b, 0xb33a9fc8, 0x01d5655d, 0x83f4987e,
-	0xbfb560be, 0xe24d7f42, 0xe6af6e7f, 0x0a7fa841, 0x1453fe9f, 0x76ee61d2,
-	0x80efa41e, 0x82ece67f, 0xfc7fb8fe, 0x95e9bf76, 0x7e01f12e, 0xa9d24dd3,
-	0xd918b982, 0x1d3f86c5, 0xe28375c1, 0x786d4f84, 0xd7dc468f, 0xd7ded7a8,
-	0x851933c0, 0x382f8c36, 0x278466cc, 0x8a1ef835, 0xf91c619b, 0x9f3f3d9f,
-	0xbce490b1, 0x6dbe7355, 0xba19f322, 0xa758ffa0, 0xf2c6fdd0, 0x39513945,
-	0x55d4e30c, 0x2ee9c704, 0x78fce68a, 0xff23aab9, 0xfdc8ccb1, 0xf93fb948,
-	0xde0ff0ae, 0x25d7c2ed, 0xd2b175ef, 0x18c29777, 0x164b81d9, 0x23ef17a3,
-	0x112a7ac0, 0x31ecf7c7, 0x228edd11, 0xd57f804c, 0x6036e228, 0x1f4f9102,
-	0x1f4f9c64, 0x38a26c8c, 0x5e54ac39, 0xd0f8bb40, 0xfc839312, 0x8a68b8da,
-	0xf4203ed7, 0x2b9183dd, 0x1e1f685d, 0x313a348a, 0x783d7e85, 0x1a30ce88,
-	0x0df18786, 0xafba46c9, 0x796e6853, 0x0fbe9705, 0xd4789e27, 0x06dea00c,
-	0x55c637ee, 0xd75dd7e0, 0xc5d23b63, 0x9c6d1f4f, 0x743c32a7, 0xe055a3dc,
-	0x293a714b, 0xbe82639e, 0x2b8e01c3, 0xdcb12f68, 0x9df1e56e, 0x8b27400d,
-	0xe5c1be9f, 0x03f7c3cc, 0xe35cf0ca, 0x6419c628, 0x935fe104, 0xfaf2332f,
-	0x26afc4f0, 0xec66cbac, 0x103ecccf, 0x3a8656e9, 0x45f7d704, 0x978c5ed1,
-	0x25f183df, 0xe27aa61b, 0xe67ac997, 0x26b4f1d1, 0x89cccf12, 0x8144d378,
-	0x9823a9cf, 0xeef01a2f, 0x778da83b, 0xf9d3e7dd, 0xef7e037a, 0x911afbd1,
-	0xbb66753f, 0xb8e30ac1, 0xb82194f2, 0x7e5b292e, 0x25a6f073, 0xa5d7f39a,
-	0xcfc75e42, 0x80feb585, 0x041e21c7, 0xcdbc4561, 0xeafdb3d0, 0x8807ce10,
-	0xdd9b4a97, 0x2816ed43, 0x71950f14, 0xc1ff4936, 0x1d207dd0, 0x41f0141f,
-	0xf851353f, 0xbd3431bd, 0xf5ca26fa, 0xabad1d73, 0x9bb90be7, 0x9b6de52f,
-	0x27c6de56, 0x82bda9da, 0xede0307e, 0x26769141, 0xff44e317, 0x5cb912e3,
-	0x78e2dd64, 0x9d35b22c, 0x7908b7ce, 0xfef13729, 0x88f7f8e5, 0x8da24c74,
-	0x00f095fa, 0x7ec71ebf, 0x9001a074, 0x56d64f5f, 0x87347f93, 0x33b5c405,
-	0x5f24edfc, 0xebb7cc77, 0x4c75dd11, 0x10b3ad8d, 0xc2f7caf5, 0x1f47a81c,
-	0xacf5d634, 0x4ed8ec8a, 0xb214dbee, 0x3d230366, 0xc261e229, 0x23558cfe,
-	0xa1407ce9, 0x5e0fefc2, 0x7478b1ca, 0x31a718d1, 0x630b6910, 0xf13f3a14,
-	0xf27fb137, 0x89e2f450, 0x5185d728, 0x33a63d46, 0xfbf52b58, 0xe8b76b77,
-	0x33de18fb, 0x0e763156, 0x77c88f03, 0xa8d5b8c2, 0x8d7e7877, 0x4aa29b33,
-	0x21c77f22, 0xdee1e027, 0xca7f406b, 0x09df2f7f, 0x4b7a5ffd, 0xe93bb3d4,
-	0x0b8f4bfb, 0xf2e4f63e, 0x7d65cffc, 0x92afcf1e, 0xff3cf9f5, 0xe45feca4,
-	0x5faa0e9f, 0x4bff5416, 0x3ebc5f9e, 0x7e83df3f, 0xd2ce68eb, 0xd214a385,
-	0xbe847b53, 0x23ee5c28, 0xf6ea16fc, 0xf33474f2, 0xdc6eb2e9, 0x6ba2536e,
-	0xd51fda0f, 0xf682d272, 0x2764d5f7, 0x704f9fe5, 0x75c44b2f, 0x63c524d4,
-	0xa1fb7d44, 0xc4c1ec97, 0xed1fce4e, 0xf8e3c2e9, 0xbfa0929b, 0x05fb7ea1,
-	0x8c4eacfd, 0x1c7ef5bf, 0x80ae1c49, 0x26f99e7e, 0x23a7fcf0, 0x49be1b3c,
-	0xb592b33f, 0x487f48fd, 0x86be7549, 0xe32763f3, 0xe645e734, 0x8d11c4ff,
-	0xe78627f1, 0xf3f50045, 0x67a5d797, 0x5ff3ff42, 0x04bd3d7d, 0xe76125fd,
-	0xcc74da2b, 0xdb34f789, 0x1be7a518, 0x7de2313f, 0x8d5d8ab3, 0xaed071c6,
-	0x00dcd212, 0x9c04cab8, 0x93f4e760, 0x8373ec03, 0x3d8c1bd0, 0x5f37f7cd,
-	0x7a47ab3d, 0x9dd5d7ce, 0xf6ed0e7a, 0x3ee42528, 0xddf166cd, 0x17ce4ed1,
-	0xe87a15ef, 0x11b39a6a, 0x8c6bf9e7, 0xb73e4021, 0x60fb93ba, 0x855f1c49,
-	0x1ccdeec2, 0x01db3166, 0xe43f43cf, 0x1b2554fb, 0x3c608632, 0xd184cdf8,
-	0x6d7e24ef, 0xc795b53c, 0x3c781b53, 0xbcd6d0b5, 0x33379408, 0x31ad9526,
-	0x84d8c1df, 0x0339485f, 0xf36f8591, 0x9d5f324c, 0xc79b263f, 0x767f30bb,
-	0x506b63fd, 0xb9c29a6e, 0xf0d0fb1f, 0x17a8e181, 0x7422325a, 0x37e79056,
-	0x498c8be3, 0x8efcb143, 0x639e5871, 0x222af4b2, 0x8be232fc, 0xc75de337,
-	0x3db05f90, 0x46dc41c6, 0x307dfc5f, 0x2adbf70f, 0x0f75a79d, 0xda87708a,
-	0xc087fa77, 0x4ac931ab, 0x19901369, 0x870917fd, 0xf9fc1f1c, 0xdfd0cd45,
-	0x8349e5c9, 0x9f71db57, 0x3490c725, 0x467e3fd4, 0xe072fb82, 0xac7527f8,
-	0x6e292e17, 0x024b8e16, 0x5dee030e, 0xd95dbe03, 0xac06732a, 0x898f26f3,
-	0xcdefe4d0, 0xc0ce658f, 0x29bded38, 0xc2f4fc9a, 0x0ff69aee, 0xa9afeacc,
-	0x6735302f, 0xb1f80555, 0x1e49fb9d, 0x62d2a782, 0xee7f4709, 0xfc5f0def,
-	0xfff441e5, 0xf40eab36, 0xd9eee755, 0xa1db97f2, 0x4e3c65d5, 0x3b47f145,
-	0xc9cecbc5, 0xa77a28f3, 0xe85f703e, 0xf3a66b22, 0x03ed9d3e, 0x7cee75c9,
-	0x773a7eeb, 0x03ef5df6, 0xeb124af5, 0x086c21dd, 0x55cbc3da, 0xaebc511f,
-	0xefcf9222, 0x8cc7ebe2, 0xfb8a0fb8, 0xdf81d78a, 0xd10fc2ef, 0x50f36c3f,
-	0xfeb73b3c, 0x1d9bed18, 0xba7ae448, 0x1e817522, 0x42551def, 0x1c68768a,
-	0xe068abe8, 0x3646e697, 0xbbee1770, 0x1fb85866, 0xb19936de, 0x1e2be458,
-	0x884a69df, 0xf3d77ba1, 0xbca8f26b, 0xfa9c2da2, 0x1e6d4f7f, 0x5f09e747,
-	0xa1ff6853, 0xe5a1e520, 0x29b87e78, 0x11e033dc, 0x77e0b718, 0xde21e577,
-	0xf3f1762a, 0x9fea05b5, 0x5a4016b3, 0xdf479b56, 0x49aca817, 0x42617f01,
-	0x05bfb72e, 0xaf21f368, 0x46acb30e, 0x7d1aabbb, 0x3d479ebd, 0x9e90b463,
-	0x807b6e89, 0x336cafc6, 0x24f7f7d3, 0xd0d77f71, 0xdb1ae1c2, 0xc972a2e6,
-	0xba93530f, 0x860fd669, 0x7c7acdf8, 0xc2d0c397, 0x6dddfda8, 0xf39528fd,
-	0xafcfbb7d, 0x21ae3ee9, 0x14b8eafe, 0x71dbf798, 0x90dc958a, 0xa57c3d20,
-	0x0b34786a, 0xc7daa7a1, 0xf4e7e369, 0xdcfc6d4c, 0x738a615e, 0x31c0127e,
-	0x3d16b1f1, 0x48b107ee, 0x35f115b3, 0x7b60c471, 0xa97c8049, 0x2237ef7b,
-	0xdeeb0c7d, 0x369da237, 0x501b9a41, 0x33ce2e5f, 0x05e9eb04, 0x2f4f5249,
-	0x1dda54a3, 0xf9067576, 0x82ac33a9, 0xccfc8501, 0x7e54fa10, 0x1a6b4cdf,
-	0x1e6ee3a0, 0xc5347fc7, 0x45f502bd, 0xbe9b0e73, 0x7366f483, 0x7cc3ee3a,
-	0x9d03f057, 0x89f90acd, 0x751e742d, 0x0ebb08e2, 0x04abffe3, 0x6f8e525c,
-	0xa2c58f34, 0x5b2a7bfd, 0x77befd82, 0x4ecd9de7, 0x47f1afe8, 0x0f689999,
-	0x25cfb8e4, 0xcc297bf1, 0xd70d7ada, 0x446f9583, 0x0bde51d8, 0xfb863170,
-	0xb44c7b9d, 0xda72814e, 0xc37ca8cf, 0x89ef09b4, 0x7ac14654, 0x7dcfc615,
-	0x7c87cc33, 0x9866f8dc, 0xef46ed1e, 0x4873f774, 0x7b37dccf, 0xa1f5c18f,
-	0x67a4c1b3, 0x9f38f7e4, 0x09db3d27, 0x5bd237bc, 0xe5267cc1, 0xe5c35dd3,
-	0x69f048a5, 0xb73f90b1, 0x552ba390, 0xaf0e485d, 0xe340063c, 0xca63e93e,
-	0x27e85dc0, 0x7ef42dd8, 0x02cb9493, 0x79410f5c, 0x3a18ff41, 0x8dfd2bff,
-	0x6b2c3960, 0xe5bf52b3, 0xef21766d, 0xb94bca36, 0x6372162b, 0x2cc67e12,
-	0x53bbe7c1, 0x5e20efdc, 0xee41aa0a, 0x3f1f68a3, 0xcfc9e50b, 0xf22b4637,
-	0x624df017, 0x54fc8049, 0xd0cfde37, 0xb9c5313f, 0x41666f88, 0xcc9fe81a,
-	0xac4ff76e, 0xfe0012e3, 0x74322b89, 0x9da9df78, 0xe6f9db7f, 0x8f7ff8e6,
-	0x48e29790, 0x67f44f5f, 0x0e61550d, 0x397e873c, 0x2cf7ef8e, 0xb8f1c55c,
-	0x45cae0d0, 0x2fe162ff, 0xa1978a15, 0x697a81df, 0x632a91d8, 0xfee51c60,
-	0x0ecc41b6, 0xd6d29878, 0x1337d283, 0x0f1147dc, 0x04d36d45, 0xa37d06be,
-	0x4ea1c5fd, 0x7832471e, 0x198d8e4d, 0xab724718, 0x6933e748, 0xe04cfacc,
-	0x1d7ade7e, 0xbee4c3c5, 0x992b8ca3, 0x807cbcf0, 0x5f42fd1d, 0x37ef4e9b,
-	0x7299c704, 0xb0bfddb8, 0xbf7640d9, 0xc3cff1ac, 0x2e7f5074, 0xed05d9c3,
-	0x777a97c9, 0xbcf5f21b, 0x0d57dec9, 0xe4ff9f90, 0x7691a8ce, 0xf4eb3e3f,
-	0x47689ebe, 0x188f00eb, 0xa35baaef, 0xbfb979e6, 0xc9f7c113, 0x7e4b7f38,
-	0x79f3e60e, 0x9f88dd6d, 0xc89954ae, 0xbe015d0e, 0x48760165, 0xe7a91dda,
-	0x7c91fda5, 0xfae7ae5d, 0xda323cab, 0xb408c9eb, 0x395c933b, 0xf87d77c8,
-	0xddbf1a79, 0x1476b4d9, 0x38a5c1ca, 0xed28b73a, 0xbc1cb046, 0xd31c14b6,
-	0x8eed1d5e, 0xcf52ebd4, 0xfa35bb4b, 0xfe772fe5, 0x8a55cd15, 0xe032407b,
-	0xb73d6eeb, 0x2deb775f, 0xe3633fc4, 0x6f91e926, 0x1e8f5e6e, 0x98f47a13,
-	0x74568f46, 0x27060762, 0x741c9adf, 0x4cf3ed15, 0x3d447fdc, 0xa3dfd81f,
-	0xe0c7a329, 0x7327c63c, 0xc15dfb3b, 0x1ffe99dd, 0xfa6b7c9f, 0x88b2587f,
-	0xff40ddf7, 0xfd732617, 0x99efac1f, 0x73a7bf95, 0x2f5f4f69, 0x0ca383da,
-	0xc1da03ec, 0x16fb0886, 0x5ec80f61, 0xbf7b4784, 0x4d5c1ece, 0x7888599b,
-	0x1e0f610a, 0xf616fe4a, 0x94a1f240, 0x5227291b, 0x48e5822e, 0x9f84c5ca,
-	0xe9113ac2, 0x57bf1ef4, 0x6cf7ae50, 0x7b46fda3, 0xcf9460c4, 0x976e3f76,
-	0xc1d6f242, 0xf1f9084e, 0x6ed68bcb, 0xf290b948, 0x5ca7e522, 0x20ecc5c8,
-	0xd6a7d8b9, 0xf70a333d, 0x6bdd92cb, 0x72fde393, 0xd823b652, 0x57ca743e,
-	0xb3645918, 0xf218aae3, 0x81a43955, 0x44ea657c, 0xbe499e1e, 0xd968bf35,
-	0x6fd3f24d, 0xf4fcfbfe, 0xe9f84e9b, 0x3f0dbe7f, 0x3f63f475, 0x3c03b2ce,
-	0xdf40b257, 0x6df9f866, 0xfb8c3bc2, 0x7af9dd0f, 0x0497d600, 0x8d319377,
-	0xae133ee2, 0x2f8a2ab3, 0x7494be0a, 0x6cc0fe96, 0x93387711, 0xe1077ae2,
-	0x82c0f5c5, 0x447bd39b, 0xb35c5367, 0xb327d711, 0x03f40d21, 0x9b7ff33a,
-	0xbdef516f, 0x3e749371, 0xfb9dfc96, 0x4392c78d, 0xb1c78dfb, 0xb5d29bfc,
-	0xf8899720, 0x300b8fde, 0x29e138de, 0x0acb6791, 0x46d38f10, 0x3c9ffac8,
-	0xfa81ece9, 0x38b8c981, 0x53de39c5, 0xf4b3de45, 0x3f6818f0, 0x8fe619e1,
-	0xd8fd439b, 0xb8f6e8ec, 0xedfcc288, 0x3b1fe795, 0x51e886bc, 0xddcce5cb,
-	0x3ffbe7a2, 0x79059f22, 0x447e404b, 0x6f037e50, 0x616fa51f, 0x9045e781,
-	0x9c21949f, 0xff00aece, 0x7fdf8601, 0x5585ed05, 0xa8d71861, 0xd6f8db8c,
-	0xf56bd415, 0xb545ed0a, 0x14d581e3, 0xfbc55338, 0x735f94b9, 0xc23e09d8,
-	0xbe78bb03, 0x93ed4a4f, 0x37e8bd1e, 0xa1bddce0, 0xb9d2714e, 0xb78a1183,
-	0x7c47465b, 0xdad149f7, 0x6bd1fc27, 0x1e7867bf, 0x6fbe56ef, 0x8dd6cfbf,
-	0x6e99f7be, 0xb2fbfc61, 0xfe7f9f43, 0xefe70a5e, 0x21d15931, 0xa8a5c7eb,
-	0x37111fbc, 0x68a1f1a0, 0x7be85d4a, 0xb8c513b0, 0x425fb8cd, 0x24f6dcf8,
-	0x28d9b7e2, 0x93f2fdf1, 0x196377c8, 0x60cfc4d3, 0x9fdfca7c, 0x8d4172f2,
-	0x19d74f9e, 0x9bafaf84, 0xa91480ef, 0xf2f8fdbf, 0xf4cbd104, 0x8476f835,
-	0xfb5db7c0, 0xe8ebefbd, 0xf7c3ac35, 0x48e76f82, 0xf86a763e, 0x22ef5a3d,
-	0x538e8cfe, 0x5747e8ac, 0xe0d6c2b8, 0x9f2fc17a, 0x6cbe27bf, 0x1d03fb96,
-	0x02b5efe4, 0x890abf94, 0x4febcf47, 0x74bafca2, 0x3cb9eded, 0x7335f3b6,
-	0x52bc01f6, 0x7fbe0fc8, 0x27faf9e4, 0x7c092e31, 0xd794f541, 0x2c1dc007,
-	0xf941758f, 0x15f920ec, 0x03fa47f2, 0xa9e001ed, 0xb8b7ea27, 0x007b4663,
-	0xd04cfc9f, 0x27b8a2e9, 0xfb9a3cda, 0x78ddcd93, 0xfb8523ba, 0x7c09cf8f,
-	0x9bed126e, 0x90f003c3, 0x1f1fe1aa, 0xe6025bae, 0x3fba784d, 0x93fbce4e,
-	0x63d07c82, 0xbf5e36cd, 0x27a3e52d, 0x7cfed93d, 0xa6af7f70, 0x7880527c,
-	0xf1fff7f1, 0xee23f461, 0x91db7817, 0x27b0e472, 0xc139d052, 0xf0214eff,
-	0x5163bd07, 0x74a1fc8e, 0x761f8fe4, 0xd04f4fe4, 0x774ef4f7, 0x3a7bdf67,
-	0xfa0cef7e, 0xea3de19e, 0xd05eff9b, 0xae883f2d, 0x1d744179, 0x942f9413,
-	0xff46af79, 0x5c5cbd4a, 0x09e3f4ff, 0x54df1871, 0x9fbf38e8, 0xbd934f9f,
-	0xfc956f99, 0xf230e67b, 0xcf9f9fab, 0xd7279e12, 0xce79ba09, 0x787a893d,
-	0x51e1ea12, 0xd414fcfe, 0x5f3f9443, 0x7e61fb80, 0xea81757b, 0xed91abef,
-	0x7afd922f, 0xefec8560, 0x3a4bca33, 0xb225cf32, 0xbd0bf777, 0xa4ad3cc3,
-	0xf035e7f7, 0xfe7d3fef, 0x2b5fc3f3, 0x7841b50f, 0xf79410d9, 0x775fb504,
-	0x22b6fb03, 0x82c7fbe8, 0xe504d7ea, 0x6be507d7, 0xcd17dfb4, 0x8b0e4852,
-	0xc9fdf046, 0xe60cb960, 0xda522f8f, 0xf6ed63e3, 0xff24895c, 0x1357234e,
-	0xfafe79aa, 0xa829fff3, 0xa7c80c89, 0xb21e89b0, 0xc05a30ef, 0xb9d041fd,
-	0xc1f8151e, 0xbcde89d0, 0xecde99d8, 0x79ef6c13, 0xd7f03ffd, 0xd22fda24,
-	0x54fb25f8, 0x9551be6d, 0xbbbd4770, 0x5f603228, 0xe2265995, 0xfdf3baba,
-	0x6389889b, 0x22fc0352, 0x6744f84f, 0xfb653cc0, 0x575d5f71, 0xd4f8bc71,
-	0x719b89f0, 0xd8b4687f, 0x14f1b4d7, 0xf68aa5ec, 0x6fc452ba, 0x5d39e1c6,
-	0xebee176c, 0x0fd030b9, 0x70bd7562, 0x523f8d9e, 0xd550bbf9, 0x53c01f40,
-	0x79d3b311, 0xea7899d3, 0x47d43bbe, 0x0df92f47, 0x47efb77c, 0xd3b412ea,
-	0xd2c49747, 0xa945a639, 0x17dcefdc, 0x366135dd, 0x1e231be4, 0xf8db7d26,
-	0xf74a58c4, 0xad95ceaa, 0x353ae856, 0x5f646279, 0x3c268fac, 0x4fc43639,
-	0x9dfc065c, 0x38276a99, 0x426b36dc, 0xabdbfa3d, 0x085fb40d, 0xfc457e2d,
-	0x3069a4f3, 0x968bb7ae, 0xb0fda7f5, 0x1a4f9fe2, 0x8ab0f787, 0x3ed0371f,
-	0x4ace8b49, 0xeaf72271, 0x6a2e74b1, 0x7a910ad6, 0xcdf4a2ee, 0x1abafcff,
-	0xbeb569ef, 0x0efbd0a0, 0x7bad5c77, 0x9b9e1067, 0xf74ee9ac, 0x7580de2e,
-	0x3efb9e00, 0x17b7bebe, 0x089f21cf, 0xa473a2ab, 0x8bee9ed0, 0xbfb35e95,
-	0xdb0b313b, 0xd0e5d6ab, 0xa39414fe, 0x956a7cff, 0x41ef09ba, 0xc2594515,
-	0xa9f6fcf1, 0x75c518af, 0xa26e3d4e, 0x478e2277, 0x8fac67ba, 0xe8b8fba3,
-	0x8a53b3e9, 0x3c014a3d, 0x67d0da4c, 0x96126262, 0xfb7d049b, 0x1e011544,
-	0xfced748a, 0x24a4f643, 0xa527e786, 0x05b899f6, 0x97ea71e6, 0xd87ce9bd,
-	0xe4e754c1, 0x2fd7c054, 0x52539cd2, 0x6e5e11e3, 0x0ffcdeb7, 0xe3fc8fdf,
-	0xe404e285, 0x395287af, 0x56d1bf5f, 0xbef8109c, 0x3d45c977, 0x469bc1f1,
-	0x277a22fb, 0xc14d3c30, 0x41f03675, 0x67cdc62c, 0xf00b7589, 0x219d92f3,
-	0xa9e1abfc, 0xf1abd12a, 0x48d9f1a7, 0x0f5f3f5f, 0x19f5177f, 0x5f2037ad,
-	0x2d7321b1, 0xa693b9da, 0x0f44ec25, 0x91fe7ed6, 0x3c230bed, 0x7985b619,
-	0x7e3032c3, 0xfc871cea, 0x7aeb12cd, 0xc804b64d, 0x77ff68a1, 0xfbe73f0f,
-	0xeb8f6877, 0xfe7bbfbe, 0x9fb812d7, 0x4697db21, 0x5ce83c59, 0xf458b69c,
-	0xfaa38f48, 0x3cf0a7a5, 0x060bc95a, 0x2f2503b2, 0x8ad63fc4, 0x06f807fa,
-	0xf3c16be3, 0x81aa63fa, 0x933a31c7, 0xad18cf4b, 0x1331b25c, 0xc99dbe71,
-	0xdc86cd65, 0x3b239b89, 0x2b52cb97, 0x5ee34fd7, 0x9651efe0, 0x71e8b50e,
-	0x0bf4737f, 0x7ba16d6f, 0x86c20b74, 0xd289bde0, 0xaf444c17, 0x63c58b16,
-	0x13ef0dbd, 0x9031f458, 0xedca9b3e, 0x9f90bd69, 0xcde9955c, 0x7ba52843,
-	0xf0df7212, 0x9e6792ec, 0xe797e3c5, 0x70da7798, 0x2765dfc0, 0xbbcbd3e7,
-	0x063f8a54, 0x1f9623ef, 0x61cc69dc, 0x788fb137, 0x32c3fd83, 0xdfde22d6,
-	0xf07dfd0d, 0xa9abe1fe, 0x0687fbc1, 0x2a5e4fba, 0x37730ff6, 0xe9770428,
-	0x3fcf7e12, 0x8dc79637, 0xfa052e4f, 0x1ede691b, 0x0f3c10eb, 0x294eedcd,
-	0xf866bc53, 0x0b0daef5, 0x13d98e28, 0x6e7184f1, 0x89e26ef1, 0xae3a4730,
-	0x085e4bf3, 0xfe96fc23, 0x7e5fee6a, 0xfaf78599, 0xd702e20a, 0x2f91fbd5,
-	0xde197e38, 0x9cfd941f, 0x7a63f65e, 0x45f731a7, 0x7cc31f58, 0xabd8634a,
-	0xbd2067f7, 0x9f71d292, 0x5d2bb653, 0xbc5ea3fe, 0x61afac1d, 0x4ab45d1d,
-	0xecc7efe5, 0x041d9136, 0x01644f59, 0xad672cf7, 0x72346838, 0x8712c63b,
-	0xeedaff09, 0x1c769fbf, 0x6eeaf1ea, 0x2687b8a5, 0x51ef27f1, 0xfbf8e915,
-	0x853a8574, 0x268157ee, 0x97497ba3, 0x7b5fb953, 0x679f953a, 0xd0774a28,
-	0xb5f29cfd, 0x0cf2c726, 0x7dfb4fde, 0x95df584f, 0x684b9aeb, 0x26f7f33f,
-	0xae54ab8a, 0x45867308, 0x3b17f3f1, 0x6af9d006, 0x51f011bd, 0xe2fae766,
-	0xa56f98b2, 0x745dd27d, 0x8ecf419f, 0xdcbea1e8, 0x7963f5c2, 0x923de00c,
-	0x186e8a33, 0xe8c767be, 0x9bf624dc, 0x7c602834, 0x3f439445, 0xbf7f28f6,
-	0x83563a4d, 0xdf6c1b71, 0x31e21077, 0x8474da76, 0xe49515ef, 0x76b49019,
-	0xaf7dfa04, 0xdeb899a8, 0x6fb55a2e, 0xf9dfea1c, 0x8de307db, 0xeaf45609,
-	0xe63f6407, 0x88b7fa0b, 0x90c56773, 0x22b677c7, 0xb93cb8d2, 0x8a2f1e55,
-	0xef345348, 0xf2fac910, 0xbf1e0655, 0x8a8f3d07, 0xc7d97ca5, 0xa5b96fd4,
-	0x6ff50139, 0x30c36ef9, 0x6951d3d4, 0x978b2e5c, 0x011f65a5, 0x44362abe,
-	0x6583bbd3, 0xe623029e, 0xca156acb, 0x4f8bbffb, 0xbf3d3e47, 0xe428b5e2,
-	0xbe61139f, 0x5a97689e, 0xe8398417, 0xc795a1de, 0xe8afceeb, 0x6695f749,
-	0xf82d9b59, 0x45acc19e, 0xbfa86ddd, 0x467d5a8f, 0x975a3fac, 0xd3bcc3a1,
-	0xbcc6cd6a, 0xe51b7f53, 0x2df38bcf, 0xa57c83f4, 0x6d973a70, 0xbfc467db,
-	0xcc44324f, 0x1f2be2f7, 0x4ff8c2f4, 0x2f737a79, 0x07c02bb4, 0xcf1052bd,
-	0x9764292f, 0xf3f1b62b, 0x2a0f92ee, 0xee400f90, 0xa83e09e6, 0xf7daf5d8,
-	0x902a1e51, 0xf23a43fe, 0x7ef3f011, 0x71b1df2a, 0xefdfe31c, 0x76913e47,
-	0x0c2bf20c, 0xf1df8c36, 0xa71a667c, 0xe18f943f, 0xfc019ee5, 0x39fb5d1c,
-	0x741c8d04, 0x1a575f46, 0xcbc587b7, 0x5d6fa44c, 0x5a1e5c69, 0x428eed56,
-	0x657c5dfa, 0x67dc01df, 0x5601df29, 0x1e421eda, 0x712a3e04, 0x3f0451fe,
-	0x389517f9, 0xfcff28df, 0xc85ef9db, 0xf3e32561, 0xd4adf393, 0x7acbf98b,
-	0xc124fdf1, 0xe04c652f, 0x2e6f576b, 0x50ce4277, 0x0ebde98e, 0x4db73f31,
-	0xf7e50efb, 0x22dcfcc5, 0x28bad665, 0x17d20fc4, 0x103e0ff5, 0x04fa9469,
-	0xbedc5c9a, 0x4bf1ce91, 0x57f8497a, 0xdf403809, 0x7e6c6339, 0xf274b63a,
-	0xe095644e, 0x778f639b, 0xfc07af49, 0xcf4adf9d, 0xeabf116c, 0x7c93c603,
-	0x7dcbc723, 0x38ddd279, 0x87dfe86f, 0x8f71cbfd, 0xd8f4227a, 0xe5c651cf,
-	0xe52fc243, 0xa1fab732, 0x614707bb, 0xee968bbb, 0x9cde7003, 0xacd2ab8e,
-	0xfd13bdf4, 0x59def805, 0xfadc50af, 0x1fe75898, 0xa8b5fc7b, 0x7e7e01e2,
-	0x277c427f, 0x307f0cf9, 0x6de1263e, 0x7038f1b2, 0x0f52dc30, 0x9f73b849,
-	0x2c6eefb8, 0xbee3f097, 0x4a9f2051, 0x957e4a3c, 0xf982f5f7, 0xda4e7896,
-	0xfe73b54f, 0x463d4cae, 0x943a77e7, 0xfc27f707, 0x5ce213a2, 0xe33c6b79,
-	0x8915ff71, 0x8af735fb, 0xb40c8b18, 0xc08ed23f, 0x807d1acf, 0xa7bf69fd,
-	0x8b3ce716, 0xd690bb74, 0xc73ffa8d, 0xd0398cea, 0xe699d96f, 0x9dcef871,
-	0xb8ef43f4, 0x31a353ea, 0x9f8bb55e, 0x52fc9377, 0xc93f6176, 0xffb8b941,
-	0x83eab454, 0xefc8e182, 0xbed035bf, 0x63e3d14e, 0xcfdfe88d, 0x187332dd,
-	0x41ef01a2, 0xbb3f5ea0, 0xbf266879, 0x984d6059, 0x3621f786, 0x01ed333f,
-	0xaf559f28, 0xd80dbbd2, 0xd16fca0f, 0x5f1499a3, 0x52d6113d, 0xf8fd0a30,
-	0xf456a81f, 0x32df6fe3, 0x7f6c31f4, 0x0c6ba5bb, 0x39b1b63d, 0x7d4ef296,
-	0xe907d934, 0x8073caf7, 0xc7dee2d5, 0x3fde845f, 0xe22a9edc, 0x2f755ffc,
-	0xdd6f8fdc, 0xacef4618, 0x75ed1a14, 0x4f6f1c3e, 0x54675a17, 0x23eaf11a,
-	0xbf255bdd, 0x99918e6c, 0xb9508693, 0x0fca0939, 0x451f9a1a, 0x51f0723b,
-	0x3f7c60cb, 0x86d7a992, 0x9a7f7315, 0x6ac63bef, 0x70912ddf, 0x0fc6247c,
-	0xdf7e4fee, 0x1b08eb84, 0xefa44fdd, 0xedf8aecf, 0x6783b434, 0xe1b4f6b7,
-	0x09ef4fbc, 0xa703fba3, 0xcf77da0d, 0x57def56e, 0x79297df0, 0x9a74f56f,
-	0xfc938fd6, 0x377bc37e, 0x839ed37f, 0xa5b9d1bc, 0xdd194b0b, 0x8d397efb,
-	0x2263f7d1, 0xe789dabe, 0x4d6a4b08, 0x7307bc56, 0xf71ef912, 0xfcab76b3,
-	0xcb99a5fe, 0x99ddc9c1, 0xe4b7bf74, 0x525f3c6f, 0x3ef178a7, 0x9fa7fef2,
-	0xb30af3a0, 0xabc4cfc1, 0xf3feed09, 0xa1a7a7ba, 0xb8765c38, 0xfe7de257,
-	0xf9f95bcb, 0x32ef0e8a, 0x2079dc1c, 0xdfb9dec9, 0xcbfb5dfc, 0x9f110e32,
-	0x2fcfbdae, 0x4fd72cf1, 0x8c3f026f, 0xdbc7e218, 0x90e74b67, 0xa9617cbf,
-	0xca4bd29b, 0x23b7b5b1, 0xe9a25b1f, 0xeb1fc0be, 0xbdf1519f, 0x835df2a8,
-	0x783ae1af, 0xbd346454, 0xd2d9f293, 0x7a8fb425, 0xa5156961, 0x0e32de92,
-	0x46aec777, 0xfab3eefa, 0x9fbc06cc, 0xb46446fb, 0x90b603b0, 0xdeeced74,
-	0xb9d79cb1, 0x4afa701f, 0x9d6dcfb8, 0x6af38519, 0x61b63e7c, 0x2235d224,
-	0x5f7e8ada, 0x724738a9, 0xabf73d6a, 0x7fa398cf, 0x3df40f93, 0x024a61b3,
-	0xbb3737be, 0x5869def1, 0xb147b25e, 0xb1c07ae2, 0xae145267, 0xb7d53edb,
-	0xa8fde144, 0x7bcbd74f, 0x3bfa5e55, 0xd8f2a354, 0xca3f6c14, 0x0cf667a7,
-	0x7c8d75be, 0x9e82f232, 0x879ebfee, 0x5c938a72, 0x0938a70b, 0xb9e2c4fc,
-	0xf3afd991, 0x3afb4af8, 0x6ef3ac57, 0x347ef317, 0x31f726dd, 0x04773ca8,
-	0x61bd3f2f, 0xefec44e7, 0x158366ec, 0xb36cfee1, 0x079ffa81, 0xc01d33eb,
-	0x5f2b667b, 0xd71e60f7, 0xf2b767cb, 0x3abccdf5, 0x5f29bebe, 0xfbf27060,
-	0xcc7e5aa2, 0xef47680d, 0x5ef274fb, 0x9f273cc8, 0x97b03cdf, 0xbe60df38,
-	0x7475618d, 0x9e9bec8f, 0xdbe60d17, 0x855f92f9, 0xd7e7687e, 0xe044f8ce,
-	0xf91de513, 0xbcc3f255, 0xdedf7cf5, 0x07383756, 0x47f24ef9, 0xd5593bf0,
-	0x57dfc646, 0x7bd385d4, 0xed2293b8, 0x530fb406, 0x20c65ae2, 0xe74e3e5a,
-	0xab9a807e, 0x37bde273, 0xf90a6d56, 0x748acece, 0x744557ee, 0xdeefc465,
-	0xcf3f2b74, 0xc97fee29, 0x86922614, 0x84527b76, 0x343b0bed, 0xaefd3a79,
-	0xcfc0f47b, 0x3db76e93, 0xd8c1ddda, 0xee0bd32f, 0x267cc3d1, 0x7776da65,
-	0xbff3fc83, 0xb7f3c09a, 0x201a86d9, 0x78994cbf, 0xd7c818cf, 0x4a9f3ba7,
-	0xece7180f, 0x38692e96, 0x19ff283f, 0xbbc5d796, 0xa5698e7f, 0x49760fb8,
-	0x24b41d69, 0xfdfedfc3, 0x7fa3963d, 0x2df3fbb4, 0x18ee9606, 0x7f097980,
-	0xdd25b4e8, 0xf8f4abf9, 0x8cc5e58e, 0xf5e74e3d, 0x0e1efc3c, 0x09ccb8fc,
-	0xf38a4f78, 0x97bcb15b, 0x2f741353, 0x9fefc1c7, 0xf252fbc9, 0xff5f543e,
-	0xb70db27d, 0x92ec9f72, 0x2a1dff81, 0x0fbda9c5, 0x89fc34a6, 0xf6a9f9de,
-	0xa23096b0, 0x4d9ef683, 0x7753be39, 0xa20bdd1b, 0x6f4c87fb, 0x57337d27,
-	0xac683bfa, 0x29dff987, 0xfcfc8960, 0x1f82a3c1, 0x3d652f4f, 0x9fe8807a,
-	0xca39b77f, 0x985c700e, 0xfa85ebe8, 0xfddc3220, 0xe9d7c427, 0x0ba9d50d,
-	0xaa1ef0e3, 0xed0f91c9, 0x7df978cf, 0xb7e132ce, 0x42f1cdb2, 0x3bbea82f,
-	0x46535da1, 0x87684ddf, 0x757c17de, 0xfe97c321, 0x192bd423, 0xed049d7c,
-	0xde5d3ce8, 0xb1e2bbf2, 0x4fed85dd, 0x700d98f4, 0xbc06009b, 0xfa1e35a7,
-	0xf7a3611c, 0xfb4a98aa, 0x7efe5ecf, 0xa2799e92, 0xd5eef86c, 0x3ee2e933,
-	0x9413dd11, 0xeff89274, 0x1a181740, 0x999d59fd, 0xbeee1019, 0xfdfd036c,
-	0xf91f492f, 0xddc2e2ce, 0x7742fe3c, 0xe31e4524, 0xe2cda748, 0xb0759fef,
-	0xbf916f8b, 0xd1e9620a, 0x330d9fe8, 0x11c9db43, 0xf5d88d1b, 0xff2f6d77,
-	0x92fc2e9d, 0xe0706cc1, 0xa2a5923b, 0xd0b558cd, 0x2d5bef8e, 0x7bd3378c,
-	0xe85f0b25, 0x96c1fc4e, 0xb60590fc, 0x89621b63, 0xa866565f, 0xf5b9ff84,
-	0x2a1dde8c, 0xf3a64fa8, 0x36f5f994, 0x12daa34a, 0x6fecfca9, 0x7ae2c9de,
-	0xe0a7d389, 0xa68cba7f, 0xd3ff4b73, 0xd9d6529b, 0x6691a77b, 0xf0bbcfba,
-	0x0b6bb720, 0xc7bfcaa7, 0xbbafefc2, 0xc8ae3804, 0xb90b8a1a, 0xe753dc3a,
-	0xf0ba57ef, 0xe77e00be, 0x677d5034, 0xfc4a57ef, 0x82dd049a, 0x7a9cb3df,
-	0xde913330, 0x59ef147f, 0x9aed174e, 0xceb3bdc5, 0x4fbcb5de, 0x6a227bb4,
-	0xddf2135c, 0xc8696774, 0x9ef52d77, 0xcffa0730, 0x7a48d486, 0x373ee147,
-	0xf59a97f8, 0xf11e8b4c, 0xbf9b2d30, 0xba753973, 0xfd90deb6, 0x4373e939,
-	0x92778776, 0x4d8fa80c, 0xecfb6d2e, 0xf50ec2ae, 0xf6bf7d65, 0x2354d15d,
-	0xbe3d4fd9, 0x69f90b3b, 0xf4515de2, 0xbfffd10f, 0xff10b4ec, 0xb83bc49b,
-	0x112b2ccd, 0xbeadc2f5, 0xdbfffb27, 0xefc1b1fb, 0x03bf06c4, 0x42eb7fdb,
-	0xdd607e4d, 0x6fed350f, 0xa9ae5fab, 0xad5bec1f, 0xfa6ccfa9, 0xb43f2699,
-	0xfb4d39f9, 0x693647e1, 0xbcb647ea, 0xfdbfa9a4, 0xfe4d0ecc, 0x683fd68e,
-	0xb6d9dfda, 0x61cf9357, 0xe7da68ef, 0xe4d03f9a, 0x57ff5ac7, 0xc4aefed3,
-	0xf1fa9a13, 0xfa9af3f6, 0x68ae7d09, 0x2f8e05f2, 0x373fed35, 0x457757ba,
-	0x0cea22bf, 0x433aadf1, 0xf944f861, 0x6629a6e5, 0xba6b07d4, 0xf8247d0a,
-	0xd3b0b96f, 0x7ba307ac, 0x6cd563ac, 0x3d5ff11f, 0xc1a0bbff, 0xde7f4f76,
-	0x1ff8c4e5, 0x6bdf8d7b, 0x527f068b, 0x8c7e301f, 0xff02ccd3, 0x9e6c5dee,
-	0x778f9355, 0x77da6a25, 0xd4d76e99, 0x68fbb927, 0x38e653ea, 0xaab4f934,
-	0x5df69a11, 0xf9353897, 0xa69e4f0c, 0x971af77d, 0x76b3df26, 0xef7da6ba,
-	0x7d4d6ef5, 0x4d1cef5f, 0x55adff7d, 0xbac0fc9a, 0xb7f69a25, 0xf5347bd5,
-	0x9a357d83, 0x5aa6ccfa, 0xf3687e4d, 0xe1fb4d7a, 0xfa9abc47, 0x355b2d91,
-	0xa99fb7f5, 0x68efe4d3, 0xbfb4d7ad, 0xc9a7cdb3, 0x9a83b0e7, 0xf7e6b9f6,
-	0xd6b1f935, 0xefed344f, 0xa9a63c4a, 0xab3f6f1f, 0xce7e97a9, 0x6b9f3e84,
-	0x53df85cb, 0xe697f8e0, 0x6ef7f6fb, 0x1f742877, 0x6ed75cea, 0x96c57df2,
-	0x24fd1530, 0x6c99c517, 0xf5111078, 0xb727de15, 0x8539f3f1, 0x238aaf14,
-	0x944c887f, 0x810bcf1d, 0xab8510df, 0xf40c8cb6, 0xfefc23ab, 0xccf5ea5b,
-	0xdadff79b, 0xd5dcff84, 0xf288beee, 0xfb6eaf31, 0x989f7a38, 0x1c225679,
-	0x77bffdf2, 0x956dde83, 0x19f378e9, 0x17f00fa6, 0xa6d5860f, 0x389af90e,
-	0x05f378c1, 0xb6c1ef86, 0x22e22bf7, 0x17bdc7f8, 0x16bff406, 0xf7f817d6,
-	0x9a976b23, 0xffc76fe9, 0xf295a96c, 0x522696eb, 0x3a00fffe, 0x0047bf29,
-	0x000047bf, 0x00088b1f, 0x00000000, 0x7dedff00, 0x4554780b, 0xeedd7096,
-	0x9d248fdb, 0x777579d0, 0x493cdc9e, 0xf09d0848, 0x3a3e00d8, 0xc0406021,
-	0x490435e6, 0x41a8c1a4, 0xf881ba43, 0xbb75744f, 0xb2021031, 0x10d191b3,
-	0x0186c195, 0x099d1964, 0x09d1a32e, 0xe09af09a, 0x1c604c3a, 0x3719d9c5,
-	0x8ee2a3a0, 0xcfe31e10, 0x7fc38fee, 0x937ba9ce, 0x380e9dbe, 0xf7ff3afe,
-	0xb4fbfa3f, 0xab755538, 0x739d554e, 0x2aaa3cea, 0x89895ead, 0xde6d6322,
-	0xf39f4a1c, 0xc99899da, 0x316f36d8, 0x0ebddbc1, 0x72defd82, 0x9d7a774a,
-	0x5bcbbf94, 0xaf1ef041, 0xdebdd28b, 0x79f74a1a, 0x92fe543d, 0x9fe081b7,
-	0xb6947d7a, 0xff299b7b, 0xc10b6f15, 0x046dbc07, 0x53f5eabf, 0x4bdde1da,
-	0x76de1be9, 0x76f4ef2a, 0xb7a6fc10, 0x6f2ee08b, 0xbc87c10f, 0xf11f04bd,
-	0x98f8269e, 0x1ed28fb7, 0xbe9467ef, 0xf2a7eded, 0x0957bc77, 0xdbbf8ebe,
-	0xcd2afc19, 0x2631e49f, 0x7ae69730, 0xc9ccc21e, 0x00f63226, 0xff824bfe,
-	0xcc8846e2, 0x8cfdd8c2, 0xb0d73eff, 0x9413769a, 0x3ff2fe77, 0x74c60285,
-	0x1f8d8ca5, 0xf662690f, 0xc634c6ce, 0xe675b026, 0xd318724f, 0x63d75740,
-	0x4e09fb07, 0xd6191319, 0x2d75dfc3, 0x58c7dffe, 0x94bffc3c, 0x834c78e5,
-	0x14095369, 0x55befb42, 0x1a777f82, 0x3e20d755, 0xbf1c8dab, 0x95135a69,
-	0xf82c3e57, 0x5563020d, 0x8be9f322, 0x587dfb18, 0xc11b0154, 0x2e8f25d8,
-	0x2172c447, 0x04830edc, 0x443a8ff8, 0x2c5d7e0e, 0x9da5b18e, 0xd29b1d86,
-	0x84aaf106, 0xfdf035ef, 0x0c1a562b, 0x3a3d64ab, 0x1df203c4, 0x9ec618da,
-	0x4ba6b8b7, 0x8a60ff90, 0xf687a7c6, 0xed9fc999, 0x2dec648c, 0xe6066b8b,
-	0x77dcf25f, 0xc07f1b0c, 0x7ec6cf6c, 0xe2ba1b66, 0xfdff4117, 0x9df6b5c7,
-	0xe1f3f0d2, 0x6c67296e, 0xdfca0ddc, 0x02ec973c, 0xa2ffca3c, 0x9ffce175,
-	0xf85645d0, 0x492f01f3, 0x1a4a78e0, 0xeadb3a55, 0x7cf8825a, 0x47b9e919,
-	0xe5f85303, 0xacf6ab6d, 0xae552181, 0x82e11aca, 0x2582eeef, 0xcd8c1963,
-	0x418e9265, 0x38e67cf9, 0x2d4d069a, 0x17822e64, 0x6fa51f31, 0xb1aabbc5,
-	0x4fccc59d, 0x21b26bb0, 0x82b8d435, 0x78cb72f1, 0x947c65b9, 0xabab71f4,
-	0x20e5e38e, 0xba4c4ebc, 0xa5c71b23, 0x5596f5e0, 0x58737aa2, 0xefc476ff,
-	0x3f1783cb, 0xd2863211, 0x174077c7, 0xeb1e6826, 0x73ac3d31, 0xf7d18ea3,
-	0x7e088f8d, 0x2e856ba4, 0xb791992a, 0x0be418fb, 0xf4027481, 0xd2fc8451,
-	0x92373a9f, 0x0949e4e8, 0x92707c1a, 0x0b1fa7d6, 0xb3f8d4e3, 0x87d12d05,
-	0x1efc005e, 0x48fa0388, 0xea0e9e1f, 0xe00d219a, 0x67afa01f, 0xaff3bdb0,
-	0xce0e5dff, 0x49cdfb97, 0xa357ce12, 0xe801d606, 0xd6b6f7d8, 0x99925bbe,
-	0x94ed6014, 0x6ba47e31, 0x73edda26, 0xb17ae0c7, 0xdfa84ea5, 0xfb0d65ad,
-	0xfbf687f3, 0xb417ae2a, 0x2ba6c27f, 0x9cbb53f7, 0x9ff295cf, 0x63c5fae2,
-	0x5eadebca, 0x16ad69f5, 0xe8713ff0, 0x131a5e9c, 0x6f0d1c62, 0xe00666e7,
-	0x3338eeef, 0xe44261dd, 0x45e7f2fa, 0x949fe60e, 0x1fa144e9, 0xb5d23ead,
-	0x178814c3, 0xf9e817ef, 0xd13744e7, 0x4419cf40, 0xe0f89fcf, 0x690639d3,
-	0xfb4822c4, 0x20ba6a60, 0xd660bd75, 0x672cdd23, 0x99ab4a76, 0x6007d293,
-	0x9d7e91f9, 0x38f4a7be, 0x76b20fef, 0xbe2bafca, 0x7cf482d7, 0x8a95c6bf,
-	0xa5eb2d70, 0x2feb377c, 0x2dfcc1b3, 0xd47b5e6c, 0x6fcf5806, 0x025a6a79,
-	0xff3cefcc, 0xce98a3b2, 0xe27c25dd, 0x7a3f8893, 0xc13eaf10, 0xfa113eb3,
-	0x92a5fbbf, 0x3f9049f5, 0x85d7cb47, 0x175f2bfd, 0x8f047e45, 0x97a1f81b,
-	0xe341cb8f, 0xab9546d2, 0x09f2a1f8, 0x9da010e6, 0xff0683fe, 0xfe00b4ce,
-	0xdfe87e28, 0x898e5093, 0x7ae0f7fd, 0xc434dfbb, 0x083f7ae0, 0x29c71be2,
-	0x806b1838, 0x2ad690fe, 0x882a8863, 0xe1621fde, 0xb9f7ac76, 0xa79fdf4c,
-	0xcfefa230, 0x4060e605, 0xa67417bf, 0x5ae50166, 0x0456cbaa, 0xbe60acf8,
-	0x6ee50626, 0x38054bcd, 0xd725234f, 0x1fd744a7, 0xa61537b5, 0xa7f7fca1,
-	0xf7ff280a, 0x698dec19, 0x5d84fdaa, 0xe321408f, 0x3f9f3861, 0x0ec776c0,
-	0x3e284bc5, 0x14429ff6, 0xf33d0663, 0xbf888b19, 0xebe444d9, 0x57f13d44,
-	0x066d4e23, 0x3c94e3f6, 0x9feda1a6, 0xf9edf190, 0xef744b4a, 0x16ecf183,
-	0xf7c3f542, 0x60f8432b, 0x2c3f243f, 0xa7d1fa8c, 0xfa563e71, 0x64bea663,
-	0x6a75d027, 0x86974b84, 0xc716c182, 0xcb998be5, 0x4fb49e97, 0xe67d7133,
-	0xc8a8de4c, 0xdd8f6a65, 0x09d1e5c6, 0xf843e49d, 0x1d9a4944, 0x9c80d724,
-	0x97f8abbd, 0xbb8f11a7, 0x2d2ea68c, 0xdd16eca4, 0x7d94fa9f, 0xff707d30,
-	0x7fd94bbd, 0xeffbe16f, 0xefb5991c, 0xf1babb12, 0x3aecc67b, 0xfd972fc4,
-	0x6d8f995e, 0xf22adfb8, 0x0b7ec871, 0xf9c5eb03, 0x832b2513, 0xc7c0b574,
-	0xdc253abf, 0x36c47c8f, 0xf4f8d2e7, 0xfe0cfcb2, 0x58c15ade, 0x13c651a6,
-	0x19704bfe, 0x20ce6659, 0x5663549c, 0x9b1e29c1, 0x06c8feaa, 0xe69e5549,
-	0x679551cb, 0x7055db34, 0xaab14b56, 0x8736a8fe, 0x97f5ce0a, 0xede7eaab,
-	0x31e0aa75, 0xfaaa15ed, 0xaa5c3b63, 0x1aaec2f2, 0x1eb8f955, 0xd09e0a8f,
-	0xffaaa0db, 0xaa7da777, 0xcd7d49f2, 0x9f29f2aa, 0x5be0a8b5, 0xf554dbfb,
-	0x57eabf6f, 0x7fb09795, 0x354f9556, 0xd3c157ee, 0xeaabafcc, 0x16fb80bf,
-	0xb61dcff0, 0x0cfe556e, 0xbbeab8e9, 0xaa4e733b, 0x75e417e0, 0x270e2df6,
-	0xe72d68be, 0xfb6cd1fb, 0x5876aa07, 0xfebe68e7, 0x7b6f3c61, 0x510b1fcf,
-	0xf4d76e4e, 0x4add21a7, 0xf222735a, 0xdcf16671, 0x2c664043, 0x14aab1db,
-	0xf94e5bc5, 0x1d308753, 0x8a5fdced, 0x715f926c, 0x05a610f2, 0xd0a58bae,
-	0x44d7b31c, 0xc8b4c61f, 0x8ad53853, 0x3dcc34a8, 0xdf44e98c, 0x5728a9aa,
-	0x3f5c785f, 0x2a28f91a, 0x074fa146, 0x827d67d1, 0x7eb9f886, 0xf28fc9b1,
-	0x24c532c7, 0x96139032, 0xb1d65a1f, 0x9a8b4c02, 0x1af66d31, 0xfa0f5f99,
-	0xba519780, 0xfe666bc9, 0xaf67206c, 0x93fae08d, 0x43a795f7, 0x44ab233b,
-	0xe699aa33, 0x48258f51, 0xe5f5bed0, 0x765d9c96, 0xb0edd6c6, 0x42e5d7cf,
-	0xc59e19ff, 0x4e01a23b, 0x30058e63, 0x2398167f, 0x25b19936, 0xfa76df3b,
-	0x97c287f2, 0x244d9d33, 0x5cf6c417, 0x7694ffd4, 0x6e7e9637, 0xdf2198d7,
-	0x11e74bf7, 0xf1adf798, 0xc21df4e1, 0xa75f9925, 0xb60b475d, 0xf69ef90b,
-	0x4cfc7c10, 0x977fdf1a, 0x0a7d73a4, 0x66eb8487, 0xacc6cbe5, 0x808ca7a0,
-	0xa93adcb9, 0xf0ea0ce1, 0xa027d9a2, 0xe0d7627c, 0x892b907b, 0xe0832958,
-	0x4e01c3db, 0x6c625840, 0xc7eb967f, 0xc5d5afd8, 0xfa00d9d8, 0xc351a849,
-	0xcf9e615b, 0xa3e20e66, 0x89f1aa5b, 0x8fdd0630, 0xf43b769d, 0xc60aadb3,
-	0x3d56f00b, 0x7a9437d7, 0xf68c34a3, 0xf8d32ff7, 0xcdaece7e, 0xf49ea3b7,
-	0xe79e3ca5, 0x3e8bfdbc, 0xeb7b44ce, 0x3589a52a, 0xf205c11e, 0xb4e95acd,
-	0xae9ea0fb, 0x8423e611, 0x348bf2de, 0x1dd7be91, 0xa090447e, 0x1269a7de,
-	0x7e9589c1, 0x0d52771a, 0xbf801bb4, 0x6609f44d, 0xe63db7c8, 0x9b3f1013,
-	0xf06769d9, 0x885a331d, 0x3cc8d7fe, 0xcbf86b61, 0x0f418fa2, 0x769d79d3,
-	0x13bba7ac, 0x271f33e8, 0xb86663d4, 0x47e3c94e, 0xa3eb10b0, 0x0d3e86a4,
-	0x9f40dc73, 0xd47d4a8f, 0xddc5fb43, 0xe80b2926, 0xa6c585fb, 0xda211d8a,
-	0x9f9e54fb, 0xfeea310d, 0x1f3e5a2d, 0x6cbedc8a, 0xf0a8ebe6, 0xa6689af1,
-	0x526be392, 0x846f5bc6, 0xc8cdb5af, 0x6ef8015c, 0xd0cc7e85, 0x55abe1be,
-	0xe83f1c66, 0x4fea4ed0, 0xc764f2e4, 0x6ec8728f, 0x21c75e0a, 0x3f9408f4,
-	0xa3e908a2, 0x7c08dfcf, 0xdbd2a868, 0xfeb26f51, 0x7b809343, 0x116b2273,
-	0x5358be50, 0xdc447aca, 0xae5744d7, 0x793e8433, 0xd654ba33, 0x839fd94f,
-	0x3d774bd7, 0x9c12fde3, 0x31d57fef, 0x1f56c7d4, 0x05718f8f, 0x3a4c53d0,
-	0xd662cba7, 0x98fe45a2, 0xbd29dacc, 0x7a52f585, 0xd4a7eb1b, 0xa622ccc1,
-	0x694ecca5, 0x3a527319, 0x2d28799d, 0xce942d67, 0xce94ed64, 0x8294bd62,
-	0x93a9433d, 0x9aeec999, 0xa637fb07, 0xd293980b, 0xa50f31ef, 0x7e9ce999,
-	0xc10b582b, 0x4a76b377, 0x24ef803b, 0x8c01fa3d, 0x9c827694, 0x904df4c3,
-	0x79769873, 0xa3652625, 0xd287201f, 0xa53b5e23, 0x94c5bcc7, 0x541d78f6,
-	0x396f6def, 0x9d78efa5, 0x56f09e94, 0x75ebda50, 0xde53bd51, 0xf5df4a1a,
-	0xcf7d287a, 0x69e940db, 0xdfd28faf, 0x1d299b79, 0xc67e07a5, 0x2be9cdf9,
-	0xf53e7d44, 0x0243bd23, 0xe591ecf9, 0xe68761d2, 0xb8f1dc99, 0x40661a6e,
-	0x235b283a, 0x7359fd20, 0xa43f0e34, 0x0b56729b, 0xe1ba42f7, 0x0cdfd704,
-	0x0fd248d6, 0x82f56dad, 0x0876ed04, 0x5808da7d, 0xa9e9e9cb, 0x9f208d73,
-	0xbad93a4b, 0x19c23b08, 0xee81194f, 0xfd3ce876, 0x64bca03b, 0x08d734a7,
-	0xc8e4d67b, 0x8fb1ff53, 0xe93e54c3, 0x03346b08, 0xfb3d2b3c, 0xe38138a9,
-	0x7befc281, 0xaee6733b, 0x253c44cd, 0x34c5f3c2, 0xbf512c30, 0xfa44c47e,
-	0xd9db6175, 0x93c00d42, 0x68454c1a, 0xebd40617, 0xae1fba42, 0xf2b9705e,
-	0x9655b6dd, 0x0d879c46, 0x0e5a809f, 0x7d19a959, 0xd5f3ab85, 0x5ebe6aed,
-	0x837b4cff, 0x09eb03fe, 0x7f6f6837, 0x7d32a396, 0x3a7effc2, 0xdd6fa60f,
-	0x6bf68ff5, 0x8e640fc8, 0x5774fdc1, 0xfd339734, 0x04ee9fa0, 0xc8c577bc,
-	0x1a4cc6f0, 0x5c43ca17, 0xd29b0db7, 0x77803efd, 0x1f573985, 0xd47ff2c7,
-	0xd14277d8, 0xa6d770ae, 0xc933825c, 0xc621b13f, 0x8f931393, 0x97df3cfa,
-	0x0d1f935a, 0xbff80293, 0xafcb9d39, 0xe95cb7ad, 0x447681dd, 0xc16586b3,
-	0x979b3b77, 0x7681cc6f, 0xf419bc7e, 0xdc478007, 0x0b31bd5a, 0x6a37d3ca,
-	0x19656a26, 0x78fc7887, 0x4d9ef573, 0x8f255fa8, 0x7686c98e, 0x99796433,
-	0xb857db1a, 0x55bce806, 0x95a7b6af, 0x7e649ff4, 0xce6686a9, 0x954d6c82,
-	0x3a1df4ed, 0xdfb81156, 0xefc64cfd, 0xd53c5957, 0x57fdcedd, 0xfee19186,
-	0x25fc6027, 0xc3bfb923, 0xfe48ceb2, 0x7ff24b0e, 0xca03bc9d, 0x7634db2d,
-	0x6b44e954, 0xea1d5aed, 0x3b598bfb, 0x810ee3f2, 0xe14bef7f, 0x0a28217a,
-	0xec0373e9, 0xd3deadf2, 0xfc03328b, 0x9f0ab684, 0xc97bf680, 0x0fa15ac8,
-	0x07e49ff7, 0x2dfbb405, 0x15c12e15, 0x8781f689, 0xb965cfca, 0xf80e927e,
-	0xfbe12ad9, 0xb992fd40, 0xa15d7012, 0xd2768adf, 0x605158f3, 0xf8b3a77f,
-	0x3b07ac3c, 0x75d5f499, 0x782bc27a, 0x97654ebe, 0x95f6c01e, 0xff2e0c75,
-	0xabb7067e, 0x5d013d77, 0xe24c1f20, 0xdd89f376, 0xce3fa489, 0xa0770d69,
-	0xa9e274fd, 0x6f0465d1, 0x3d40ec99, 0xc9eec4f2, 0xb39d31d3, 0x3bd52665,
-	0xb41eb021, 0xb96ce787, 0xd4fcc45b, 0xdb0bc00c, 0x7a27a33b, 0x41e5b39c,
-	0xcb47fbf9, 0xe358bcb0, 0x91da09fb, 0x22fb8dc5, 0x1c9e4ed0, 0xa6124af9,
-	0xf57d3427, 0x5dffd0dd, 0xdc2bf666, 0xe31b9d9e, 0xfe1cb1fe, 0x74a9f731,
-	0xbfd7ea1d, 0xf5a74f4b, 0xc41ccf9c, 0xec835007, 0xf6f65bba, 0x8a4d061e,
-	0x3fded6dd, 0xe65ccc15, 0xc11f30e8, 0x5ecbb4b4, 0xd657d386, 0xe9823ce3,
-	0x194f5ef4, 0xa7e52faa, 0xba608e5b, 0x3bf5d724, 0xff179f9c, 0xbcaf7be1,
-	0xc7c8f008, 0x07a8cdeb, 0x37d13e65, 0xebf92763, 0x21f90c74, 0x45a7926b,
-	0x746c048b, 0x787ca0c6, 0x835169f6, 0xad21b9fb, 0xc3610c25, 0xb41ae97d,
-	0xb745770b, 0xb3b8d0d4, 0xe3ce19c2, 0x210fb0db, 0x3b45645d, 0x809f9063,
-	0x3e1d692f, 0x10d3e993, 0x634731ed, 0x1fcf187e, 0xe1ce17a8, 0x5af503f3,
-	0x27ea04c2, 0x13fb2046, 0xbfdc06d4, 0xddfef26d, 0x38093cc6, 0xcf48d61f,
-	0x64ebf40e, 0x67fe7095, 0xb02e9c91, 0xfa44d37a, 0x96cd9c84, 0xb89dcf16,
-	0xe897560e, 0x3ba40beb, 0xf40706d8, 0x19827491, 0x055bd7da, 0x219c830e,
-	0x7e87f0bc, 0x42c98b0c, 0xbf828d7a, 0x0bda02b5, 0x1c7033d0, 0xdf834cf3,
-	0x9b177429, 0x4235c7c1, 0x65acbfa6, 0xdf053dbc, 0x9f2e0cb8, 0x83496f01,
-	0x7c6568f8, 0x009a1c60, 0xd1ea027c, 0x66f006f8, 0x05d21b76, 0xa7817a48,
-	0xc703124c, 0x8471ad5f, 0x7a645da1, 0x4fe8fbf5, 0x02394289, 0xf753fe78,
-	0x69f22324, 0x327238f0, 0x46df08d2, 0x6f5187d0, 0xfce2e99f, 0x11e958db,
-	0x18423ec8, 0x3a2c9fc7, 0x35681fd0, 0x017416ad, 0xf326b5e3, 0xa5667a7d,
-	0xcae51ba7, 0x3b08e2cc, 0xac9df7d2, 0xf3999d7d, 0xc04c91f7, 0xf81b146f,
-	0x41c4d899, 0x4f47f0bd, 0x97127bbf, 0x97b59934, 0xf9fee2e4, 0x70b3fdf8,
-	0x3a3eb6fd, 0x4ff107b3, 0x3baa79cc, 0x5e741a06, 0x197dd794, 0x6ca4ebf7,
-	0x1c0e3f13, 0xe0079247, 0x8d44bf40, 0x41e81cba, 0x65742b05, 0x71a21a13,
-	0xe444d1bf, 0x7a819ccf, 0xe486944a, 0x6129c83b, 0x33fd4841, 0xf9e4ae88,
-	0xaee7d657, 0x375a4c8c, 0x03af89ab, 0x171bb7eb, 0x5583ca46, 0x6dfa09d6,
-	0x011f3604, 0xa658df74, 0xd7680bf5, 0xac28fd62, 0x919de2cf, 0x8769d743,
-	0x03399a4e, 0x1ac3f4e5, 0x74366ef3, 0x7edc815e, 0xc3ed7a4b, 0xf90e5471,
-	0x7dfc91a2, 0x436af801, 0xb8f5eac1, 0xac6dfd59, 0xb48cee6b, 0xc989f9a1,
-	0x3ee2660b, 0x68cb589b, 0x47cb83fd, 0x575ea63d, 0xa3c737b2, 0xbbf988ff,
-	0xce7ac1be, 0x8655de4c, 0xbaf07cfa, 0x1a97742a, 0x105f7a1b, 0xa65f3933,
-	0x954fd846, 0x92215e93, 0x114ce09e, 0xa2ed03e3, 0x1f7c190d, 0x1335fdba,
-	0x23ec43ed, 0x5cb71fa3, 0x93ef577b, 0xa50eb0b9, 0xae683457, 0x1cefa3b0,
-	0x484ce1fa, 0xddeafda7, 0xf50affd5, 0x1a657da6, 0xb06ff987, 0x10e819be,
-	0x9d80f5f1, 0x2fdaf001, 0xa3a0b4f6, 0xd992b1a4, 0xfa55df71, 0xf3f723d9,
-	0x49df9d0b, 0x645735f2, 0x820e493b, 0x2f401e65, 0x7e896900, 0x56731978,
-	0x68dd90b6, 0x5907cccd, 0xf6bd6e8d, 0xfe5fb425, 0xefd0cf49, 0xd242af38,
-	0xe7f8c095, 0x65ba4a55, 0x5917c7e8, 0xf311ea39, 0x3f94ec2b, 0xf3ced2bf,
-	0x417f3c8d, 0x17f28385, 0xbe783a54, 0x3e61f209, 0x7bf85616, 0x42eed0bd,
-	0x41a48c53, 0x93a5783f, 0x50355f97, 0x0f603bf9, 0x87c90264, 0xde49f987,
-	0xe1a67cb7, 0xb84f12f1, 0x0d5c005f, 0x123d4591, 0x1a7ddfce, 0x8624167b,
-	0x01999114, 0xe9c2b67e, 0xf3f942d7, 0x13809fcc, 0x6af546f9, 0xbfe43667,
-	0x719a2c91, 0xc0386f7c, 0xabf9c66e, 0xe9de6915, 0x351bf007, 0xd8cf14c9,
-	0x7dadfb21, 0x67e48c2b, 0xfc875d05, 0xa2456cac, 0xf2f0c7ac, 0x7ecdcb6d,
-	0x0e40c7d4, 0xdff63ad2, 0x001e9227, 0x1cedf0f2, 0xca5e8bd4, 0x484987b4,
-	0xb37e6ab7, 0xa12f2f54, 0x19992af6, 0x9559f2ed, 0x97c6bdbc, 0xea0d7e34,
-	0x3379a655, 0xf71a0e91, 0xafda3b32, 0x2a9f56cf, 0x9b78458b, 0x87e5cedd,
-	0x56342e5a, 0xe12e396f, 0x731a3c78, 0x7ee7d516, 0xe94f46ad, 0xc830ad2e,
-	0xd2deb4cf, 0x2a18fca0, 0xd83dec6f, 0xa955424e, 0xb3d4137d, 0x8fd138c0,
-	0xf3cf4dbd, 0x1488f77d, 0x8b54b067, 0x4182e65d, 0xa7914efe, 0x187c82d0,
-	0xc545f245, 0x525fa35f, 0xf9923fc3, 0xc45df814, 0x3176f971, 0x5d95c93b,
-	0x27207aea, 0x52af2835, 0x67f9d4da, 0x2fc504b2, 0xe0879aa5, 0xb87ab679,
-	0xe71e0bdc, 0xc2bab8e0, 0x34b8d146, 0xd7285c7c, 0x74d73f20, 0x2b73f288,
-	0xa124bb45, 0x853f6bbc, 0x92f51fe3, 0x9e00bac8, 0x13345d55, 0x66d669e9,
-	0x6643b90d, 0x0b925eb3, 0xe2b71b37, 0x671e08df, 0x6436f8f0, 0x1cdf6968,
-	0x1bd707d0, 0x7d6c1f49, 0xb8c1a4c4, 0xe15be822, 0x973857e8, 0x099e1a55,
-	0x532230f3, 0x6bafd7d6, 0x34693cb9, 0xacea9d11, 0xfa04e58f, 0xa5d1841f,
-	0xeebeb023, 0x72bcec7a, 0x68e91b8a, 0xac72c1dc, 0x93639658, 0x2a7c60fa,
-	0x933873ff, 0xd6f7e602, 0x7c1518fe, 0x5544d5fb, 0x2e1012fd, 0x8d53e581,
-	0x69f2aa79, 0xf82a71e6, 0x5514db0e, 0x54d219fd, 0xce677c15, 0xb3faaa9d,
-	0xf055f3ed, 0x544bc55d, 0xee3ae7f5, 0x2fcf9555, 0xbe55487f, 0x0546b9d0,
-	0x7bf8aa2f, 0xaec5fd55, 0x92f95546, 0xe555279a, 0x9293f6c1, 0x3f726696,
-	0xe79b56cf, 0x8be483a4, 0x0e46704b, 0x14a967ad, 0x3dd703fb, 0x53eb822a,
-	0xe51af5c1, 0xe04178f5, 0x48feb1fd, 0xe29df20d, 0x91ed637f, 0xd75cff2a,
-	0x3ec6c9e4, 0xec72fa13, 0xb2dd23ef, 0xc51fdc13, 0xc53bfcfc, 0x04fdd57f,
-	0x56f683d4, 0x715ba647, 0xabbf43bf, 0xf9fd0f4b, 0xb7bfe435, 0xb40bd736,
-	0xe7ae6e0f, 0x7aab957e, 0xc00d8ae6, 0x7ef38583, 0x828e78e5, 0x70447327,
-	0xcf1860ff, 0x95fb26df, 0x52bf439e, 0xb03f6336, 0x17787e28, 0xac509bb5,
-	0x467fa1f7, 0x7a08f6a8, 0x662e5b94, 0x07284836, 0x97ff5397, 0x5823ec2b,
-	0xd2567988, 0x398daf56, 0xbd5b7da0, 0xc61ead6f, 0x69399756, 0xbcd0b3cb,
-	0x1fc8c3cd, 0x94e668f3, 0xe7816b2d, 0xa25321ff, 0xf9104975, 0xf75f3f3c,
-	0xd03db9c6, 0xa5956b5f, 0x706ae508, 0xf3bb9279, 0x941bb1e2, 0xd5f2bf3f,
-	0xd1bfee0f, 0x671d75f7, 0x87ca029a, 0x24568bf5, 0x1d004732, 0x7ed08648,
-	0x74c81ff9, 0x27ac9ee5, 0x5a33d63f, 0xcfc893d7, 0xd7ff2617, 0xddf0bdc4,
-	0x3dcae979, 0xfe43a7a8, 0xea1f300f, 0xcf9ebcd1, 0x29e744bc, 0xbf40f352,
-	0x2c3bfd47, 0x941edd34, 0x95ad17db, 0x5a07e8fd, 0xd097a91d, 0x7e324fce,
-	0x0eea7e46, 0x83abb71d, 0x07e7f7ed, 0xb276edec, 0xedcbf7bf, 0xad5396ec,
-	0x8ccf7f99, 0xe45a263e, 0xf98840f8, 0x09b546d0, 0xab12af28, 0xf9024fc5,
-	0x4f523ba2, 0x498b047e, 0x6a983bf6, 0xc5017e54, 0x791dd06f, 0x6f7480bf,
-	0x7e415ae9, 0x6017f47a, 0x75e5077b, 0x2417f609, 0xe8b4ff19, 0xb51bd8e3,
-	0x23f206cf, 0x04fd1084, 0x27f8a1e1, 0xa3f1fb82, 0xccfb813e, 0x27d270ca,
-	0x397dc782, 0x6650e4b3, 0xff48f23c, 0x7e503bc9, 0x7ed1d29f, 0x84bd1c38,
-	0x1fcce149, 0x266f7ed0, 0x7223efb7, 0x91f95462, 0x0fe644f6, 0x64b35ff4,
-	0x321127f3, 0x48cc5b0c, 0x51c6df7d, 0xbcdbdfd8, 0xbb3a13bf, 0xd841f48d,
-	0x7bfed0f6, 0xeee7e64f, 0xab69465c, 0x01b7976c, 0x9cfa631f, 0xd9fa4cd7,
-	0x843fe036, 0x4a257bb7, 0x4a1cdefd, 0x54ed7a77, 0x4c5bcbbe, 0x83af1ef0,
-	0x72debde0, 0x9d79f74a, 0xb792ff94, 0x7a9fe082, 0x7bb6945d, 0x15ff286b,
-	0x03e087af, 0x5f8206de, 0x44507d45, 0xa533753f, 0xa85b786f, 0x46dbd3bc,
-	0x3f5e9bf0, 0xbdde5da5, 0xdbc87f94, 0x6f11f04e, 0xbcc7c107, 0x78f7045d,
-	0xdb7d287b, 0xeff94bdb, 0xdc134f78, 0xb1938f2b, 0xfa2f5ee6, 0x84a25c2b,
-	0xaeb3ddfa, 0xd7ea336a, 0x331a65b6, 0x9736f38a, 0x39fa0566, 0x78f255b6,
-	0x86956d9f, 0x87a040fc, 0xb39f51fa, 0xf8fa7b2d, 0x405f2a34, 0x49b15be5,
-	0xabac4a30, 0x56cafeb8, 0x159ea9ea, 0x77c1020f, 0xfd2b6adb, 0xb25b805a,
-	0xbadca9c3, 0xedbb244a, 0x3a278d79, 0x245deb9b, 0xae3aadbf, 0x1074283f,
-	0x22e9fb21, 0x974a44b2, 0xa3fc7365, 0x23ef4232, 0xfc4a5919, 0xc707b9a4,
-	0xf182ab67, 0xf555be21, 0x5a5f8c46, 0x49f183ef, 0x3aae3fa4, 0xc3247804,
-	0xc07f1178, 0x6cc2fc87, 0xad97d719, 0xaf08eb55, 0x94f365e4, 0xda346778,
-	0xfa9e6de9, 0xa56f84b9, 0x36cd7e48, 0xfbe8a1d7, 0xe7ca4e50, 0xe1f1ac7c,
-	0x50fe7f4e, 0xf082327c, 0xddb8c6df, 0xd2fa0c90, 0x00e310fe, 0xc7a9478b,
-	0x198f78fd, 0x26f1fa43, 0xb2627acb, 0x3d8ff9c0, 0x6dff122c, 0xc1f7a067,
-	0x7e81cf77, 0x503943e7, 0xfa156fba, 0x72cd1eab, 0x3c02cc4d, 0x3f8d247e,
-	0x531c0224, 0xaf4fdbce, 0x1ea0f717, 0xae7deb0d, 0x3e37f209, 0xb689d9b8,
-	0x6966ec71, 0xdb5bb22d, 0xd01357b2, 0xa82c95ff, 0xcb4947d7, 0x3bb63c65,
-	0xd5cf7b78, 0xb64fe48b, 0x76903aae, 0x865bf784, 0xfa8e26fd, 0x61ba187d,
-	0x1a481632, 0x55c91914, 0x2fec45e2, 0xe5cda1ec, 0x66fc5fd8, 0x215fd287,
-	0xe775f7f6, 0x65e3e469, 0xbc085756, 0x37279386, 0xb38b2393, 0x8e48e322,
-	0x9424b124, 0xb8ebcf23, 0xe49df2dc, 0x861d24fa, 0x1fb43499, 0xc4ae7e25,
-	0xe8e383d3, 0x243d3235, 0x61c74219, 0xfde80d57, 0xddb7aa3e, 0xe749c9b1,
-	0x0b3e304b, 0x6c75ab45, 0xeaf3ae05, 0xdaf37092, 0xa4a0f410, 0x018e505b,
-	0x468bdfdf, 0xb9b3b523, 0xe1a3b79c, 0x56cadced, 0x32625c11, 0x6bc842fb,
-	0x6e5a7d25, 0x4e2c81e7, 0xbe0f49b7, 0xae18f1b4, 0x3a3adbef, 0xc69cf413,
-	0x04ed11bf, 0xc92d09df, 0xfb6d44d7, 0x78013d8e, 0x79e3cb35, 0xb5cfef4e,
-	0x7b40ff23, 0x915728f9, 0x7fc9f25f, 0xcc0566c1, 0x5addf2bb, 0xa3fd8fd9,
-	0x29a21b6b, 0x2eb55cbe, 0x36a3f50c, 0xb07a2466, 0x85d13cea, 0x4560f401,
-	0x1f410cba, 0x4af4b2fb, 0x3254d53c, 0x7c32e311, 0x728a9e5f, 0x583ef009,
-	0xe1fb451d, 0xdeef65d4, 0x5be01639, 0xd47688ae, 0xe5ab9ecb, 0xfd2713e7,
-	0x26e74351, 0xdb9c7cde, 0xb7fdb77d, 0x7bf41eb2, 0xb3e9c827, 0x7a41e768,
-	0x77b3334b, 0x52dcbac1, 0xcdff226d, 0xb3c557ad, 0xb91a7681, 0x7da3c7a4,
-	0x5335fdc1, 0x803ca1fa, 0xa67d26fe, 0xaa330fae, 0xa1233d45, 0xab6f9d4f,
-	0x1a66703a, 0xcb56d3f4, 0xf6bb6e3f, 0x7d8471fe, 0x93f21af5, 0xf429f500,
-	0x4dfe4093, 0xe78097d1, 0x191a3716, 0x32eb73c9, 0x41e519a3, 0xe49c25b7,
-	0x1362db5f, 0x321ba1e9, 0x9ea18757, 0x8faaa86c, 0xdea474c6, 0xa77d03b7,
-	0x7dffbbdd, 0xe4812d9e, 0x817f3f2d, 0xfa0c5984, 0xae7abdc0, 0xb6faf8e4,
-	0x7944cb4c, 0xc3f2a1a9, 0x8b7dffbb, 0xac077d0f, 0x3490f085, 0x7e0f912c,
-	0xe29bbe00, 0x2fdf02d4, 0x444e6740, 0xabae74f8, 0x4243e507, 0x8b1baf9c,
-	0x56ce9ab6, 0xcae2f9d2, 0x5d33e238, 0x31e987b5, 0x18c8b2bf, 0x9f0ae7c8,
-	0xfffcb5fc, 0xbbe71cb4, 0x59b81c99, 0xf7e337bb, 0xbe73a59f, 0x369ece19,
-	0x154f230c, 0x9acf18fb, 0x4b6c8a63, 0x7d59eafb, 0xf6eafd48, 0xc567ce6c,
-	0x643e7e7a, 0x72f4c54e, 0xfaf8c38a, 0x96c73c44, 0xa9f9cd93, 0x714912cd,
-	0xd674b6e2, 0xdf037185, 0xf7f70d72, 0xdafff1c4, 0x3fc9d32a, 0xa2782ad4,
-	0x3e78197d, 0xeb8695c2, 0x147306d7, 0xa6b7fd09, 0xfcceb972, 0xabc6331e,
-	0x409a9da1, 0xf3dec1fc, 0x9198e9a9, 0x0bfe4c3e, 0xa49ef12d, 0xa3b7f00f,
-	0x17fd1c5f, 0xdadddfc1, 0xbf6f86af, 0x984b86aa, 0x354f054e, 0x6669e1aa,
-	0xe6c96c35, 0x361dfa7a, 0x490cfe75, 0x1ca7270d, 0x73f0d309, 0x7f01a6ed,
-	0xbbf044b3, 0xa07e0199, 0x01769a0d, 0xafa525e7, 0xadb2fc96, 0x93dfdca9,
-	0x73f6af5c, 0xb596b224, 0x6df90231, 0xfcb6f954, 0x73fa0255, 0x7cead56c,
-	0x8c150798, 0xbff48acb, 0x9f95d724, 0x02e9718d, 0x4b3aee7e, 0xc5cde9eb,
-	0x238b6875, 0xcf934a3e, 0x1fdd0d05, 0x95b8d0b7, 0x7c0f9076, 0xfa45e301,
-	0xe62f840f, 0xc76726ba, 0x05f03e73, 0x7df997ee, 0xa503e43a, 0x41f8e1bf,
-	0x3962c7e1, 0xab9ca26e, 0xa5b722b9, 0x97a9ab9c, 0x0475c7cf, 0x92b9c79d,
-	0x81e7465c, 0x09aef4ae, 0xc877c50f, 0xce6cbe67, 0x946e9877, 0xdf20d7cf,
-	0xef9cf4f9, 0xd5f0df30, 0xfd28672a, 0xafbcbcf0, 0xcc37b43c, 0xf8c071fc,
-	0xab47b656, 0x82477760, 0xd3bcf039, 0x740ff843, 0x3a3337ba, 0x0f2b5a47,
-	0xbf338be7, 0xe908d3db, 0x0b975a5b, 0xd66567d7, 0x338f3d59, 0xfe51ebf5,
-	0xdff7979e, 0x38dd820d, 0xdb94c05a, 0xbb668da5, 0xccbdfd11, 0x57f2a19f,
-	0xd5877e28, 0x31acd22b, 0x0188ff80, 0x4cd3823f, 0x33e34de7, 0x35118fc9,
-	0x2b3771d5, 0xccf73c04, 0xa2046f98, 0x554e85dc, 0x658fc790, 0x97d0fd97,
-	0x035e383c, 0xce02abfa, 0x0f441923, 0x3573b923, 0xe7014995, 0xff655bca,
-	0x9b1f00c5, 0x7f609796, 0x7896cc3f, 0xd679863c, 0xda9fff72, 0x6ab8665f,
-	0xd833b553, 0xdfaab27e, 0x722fd956, 0xfed5f6f3, 0xf4d5c337, 0x0ecfda61,
-	0xb21cdf6a, 0xd576c1fd, 0x11afbc7e, 0x3e436f1f, 0xb5ffce18, 0x1ba7965f,
-	0xf45e9e6c, 0xd818e97f, 0x06071495, 0x6a8898fa, 0xc369ff23, 0x5d5379f9,
-	0xa60fdab2, 0x1f927e63, 0x90d647cf, 0x3e6048fc, 0x9859df8a, 0x47d7f287,
-	0xbbf1e74d, 0x1371b960, 0x8798c179, 0xfd00dea1, 0x3f57f2a9, 0x46d3f7c2,
-	0x3c42eec1, 0xfff3c783, 0x89abdd8a, 0xfa4bdf1c, 0x64b84a73, 0xdbde81b8,
-	0xe32575ea, 0x3dc21bf7, 0xfeeb1835, 0x762ebb3c, 0x1b3de83d, 0x7c08c630,
-	0x71bb3576, 0xfb84cfbe, 0xf58fa724, 0x27a21a71, 0x1d96ddcb, 0xb27a00da,
-	0xa8695de8, 0xf2345af7, 0xa1fc2f39, 0x65bd6cbf, 0xfd10a6e7, 0x029bfa2b,
-	0x8f002b5b, 0x956dba00, 0xfe81e6f5, 0xd0ee2496, 0x3163b406, 0x3fa90ab8,
-	0xd2a35ce5, 0xeb37d35f, 0xf7ecab6f, 0xdeb3fa52, 0x559f1ea3, 0x59f1a1ef,
-	0xe947fde5, 0x2f8e2b6f, 0xb4dd5f04, 0x1e8ed93f, 0x7aa96fe8, 0x8783567c,
-	0x72d567c6, 0x7f40e1ff, 0xbfacdf4d, 0x931ef936, 0xe1d3e64d, 0x0e37fdce,
-	0x1a76ab9c, 0x29b4ae51, 0x7f7940fe, 0xbfb414bb, 0x37f796ad, 0x714bfbe5,
-	0xbddfe4e9, 0x18df33d4, 0xfdc35f6a, 0x247ac98c, 0x2648f593, 0xcf0891eb,
-	0x3ea67a99, 0xf0b0e81e, 0x22f9b6c5, 0x1e73e3ec, 0x153e333a, 0xf62f19e0,
-	0x5f6117cf, 0x99e2f39a, 0xc9f04903, 0xccbe2fcb, 0xe6787fcb, 0x9b94324a,
-	0x2fcdef7c, 0x962a3803, 0xde0ac7ef, 0x8db7bf4a, 0xbba37ae2, 0xbfee73e1,
-	0xfb8af904, 0x87aa6356, 0x42f17fa1, 0x32d47f72, 0xe94eefa8, 0x310f2cb7,
-	0x6eea4a2f, 0x467e4f38, 0xff287914, 0x40bfe1e6, 0xee53cfb4, 0xefab9467,
-	0x6d454467, 0x8c2ffd22, 0xef28cdf9, 0xba0e8c22, 0x28d6f84f, 0x642c1fbe,
-	0x376e0af6, 0x39f25948, 0x31cfba0d, 0xd76e58bf, 0xb1cfcb7c, 0xb1c6a17c,
-	0xdfd9ed1e, 0x478aaa4e, 0x173958f5, 0x7f783797, 0x1bf5d772, 0xbe0e1f9c,
-	0x23e7393f, 0x23c2eb81, 0x3ba5bfb8, 0xb9f7e257, 0xa886fc02, 0x9f370ef7,
-	0x7db8a3b5, 0x0e9f383f, 0x0e319f3e, 0xfee69f3e, 0xfeb0b5a8, 0xcb7ee8ee,
-	0x5d9fc413, 0xc86be721, 0x5fcd06bc, 0xd8a628fd, 0xb7a45a79, 0x32b7cd9b,
-	0xc1f9caaf, 0xa2ca4146, 0x794feafd, 0x3183fd2a, 0x8e2a14bb, 0xb819f483,
-	0x4e6deabf, 0x5d19fe86, 0xcf073d9c, 0x45fe3795, 0xde5cf21b, 0xd63e796e,
-	0xb9d38546, 0x3d28c6ce, 0x51dddbd9, 0x97fa1933, 0x9a74d345, 0x72a8b297,
-	0x8da96f3a, 0x8f68ed65, 0xd7239f06, 0xce9bb88e, 0x68ad6901, 0x703a4041,
-	0xa461d92e, 0xe8b989f8, 0xc5c8e786, 0x8f239d9b, 0x91cfc999, 0x7425e947,
-	0xea45b459, 0x7f239e43, 0xf7df146c, 0x713c71bb, 0x278c3f88, 0xa21c706d,
-	0x31d1c799, 0xf5f2023f, 0x7f231766, 0xc7de3cba, 0xea5075e4, 0x861ecc1b,
-	0xb7ab40f2, 0x68a7a84b, 0x613ef9c3, 0x4e5869b0, 0xf7c8bf08, 0xfbe8e947,
-	0x34cd724f, 0xd7231aaf, 0x5afce7cb, 0x7a4fe908, 0x4fe29475, 0xc3674d0a,
-	0x0d3cc9d1, 0xf0a7473f, 0x9e9302e1, 0x302df7ce, 0x0fd14ad9, 0xef0800b2,
-	0xfa8098b3, 0xf7e22db7, 0x0dbb4581, 0x5337e7e9, 0x6ff9ff6e, 0xb9f9ba18,
-	0x43353e7c, 0x4ee3f747, 0x8f61cc09, 0xd57e7a19, 0x869e8ce9, 0x66bb9a6e,
-	0xec87599d, 0xeff2e2f7, 0x867b6115, 0x167553e3, 0x779fec89, 0xa85ca146,
-	0x0f1f5b4e, 0x42caa2f0, 0x94dfdd1d, 0x08ee44e3, 0xd19fc72e, 0xa28e4eba,
-	0x51e7d178, 0x624748a5, 0xa3e22a7f, 0xea0289c4, 0x9e2a37bd, 0xd7e1cdea,
-	0x18dea0c5, 0x7f67d394, 0x1eb462ef, 0x127a50b6, 0x302c4fda, 0x07cb236e,
-	0xf302a3b4, 0x01627ed1, 0x2f2c27eb, 0x9085f6b6, 0x609a4a17, 0x0d5292db,
-	0xd0909e7c, 0xff92a942, 0xee5b43ac, 0x57aeb10f, 0xc6fd75e5, 0x601b4c76,
-	0x8ed0713b, 0x2ae5fb01, 0xd517dbce, 0x61e32ca7, 0x17657548, 0xe9b18ec9,
-	0x88933e15, 0x1e6106bf, 0x45fb04af, 0xd5b0de75, 0xfba14beb, 0x6d38f2fe,
-	0xa346d62b, 0x1c55031d, 0xbcdb9f48, 0x9965296d, 0xcec8e383, 0x8d13e991,
-	0x17a889b6, 0x5c725ff3, 0x97f40ccb, 0x74349b24, 0x5326013e, 0x6e612f75,
-	0x38b4f459, 0xccdd4534, 0x2ed0926e, 0x3f3d25ef, 0xf896bae1, 0x62f0e120,
-	0xa4ab7186, 0xef0176b8, 0x23f40d03, 0x97ae6fdf, 0x5c57b9e3, 0x048e3465,
-	0xcefec0eb, 0xf38d0ec8, 0x747945cd, 0x518e69e5, 0xe5d58fc2, 0xdcfc71c9,
-	0xe1d5fdc2, 0x3ae8097e, 0x4057b6a9, 0x380c0138, 0x5c27c5f4, 0x426b4c6f,
-	0x045af279, 0x6db58bf9, 0xf207cc99, 0x45745527, 0xfb3ce0e5, 0xc9a6ffa5,
-	0xdf0b0790, 0x9c207cad, 0xa136b3f4, 0x25d90665, 0x285869f7, 0x1c98cf3f,
-	0xc828c7ee, 0x609ffce1, 0x1ea94d6b, 0x44d3e987, 0xcf975f37, 0x1db39067,
-	0x9f11d9f4, 0x1c58fa2d, 0x759a7bd4, 0x9b73e9a1, 0x7ec0efdc, 0x185fcf21,
-	0x7f911973, 0x3b9382b5, 0xdbeef739, 0xce82cfb7, 0x55e74613, 0x8d7ac936,
-	0x4e444ed2, 0xd846153b, 0x45cf0c1d, 0xdf07660a, 0x9b3ecc07, 0xf9abd60f,
-	0x7b486d2b, 0x791cc1eb, 0xb26b491f, 0x4cb2fd61, 0x94fd0dbb, 0x1a55f7c1,
-	0x70da26d3, 0x0c671a7d, 0x7031a9d0, 0xcb4ee85f, 0x53cf1f7e, 0x2c747a99,
-	0x70591cf0, 0x2173c7aa, 0x972837b1, 0x1d3797cf, 0x9b42e7e2, 0x78bd454c,
-	0x14c9a10e, 0xfec74457, 0xa99cfc4c, 0x3a64df52, 0x64def246, 0x1356f1e7,
-	0xa2020fee, 0x3ba1e7c7, 0x83cd18ed, 0x0e5a6f52, 0x7b26ab97, 0x5bfbc317,
-	0xd53f76e1, 0x3e9d130b, 0x161fe00d, 0x4ffee8c7, 0x55f39198, 0x318fac04,
-	0x7e95ef80, 0xd1d1cb6f, 0x172535bc, 0x7e1096f5, 0x6704de22, 0x1b22b64d,
-	0xdf38dbed, 0xb4636fd0, 0xaf9cdf42, 0x5be7971f, 0x3e51a769, 0x434f7aff,
-	0x58b2fcce, 0xd73913f4, 0xa6bb60e4, 0x83b446e5, 0x6fe391b4, 0x6186ded8,
-	0x285e6bdb, 0xf238f7b7, 0xc8b23685, 0x50e9ed8c, 0xc3a0845e, 0xfe76e467,
-	0x30ede357, 0x97df74b3, 0x9f305a60, 0xa3de942d, 0xa38c46a4, 0xddfa1b8f,
-	0xebbf9637, 0x90247ed4, 0xfc717bbf, 0x1ecf932b, 0xee1ca12b, 0xdb2eda3f,
-	0x619d8a27, 0x2ededb91, 0x3ee87bf0, 0xef4edc21, 0x8776c836, 0x0f3d4c25,
-	0xf941f783, 0xe0ae5c3a, 0xc72ee6e7, 0x046b8a31, 0x77e5f3f3, 0xb40e8a3e,
-	0x73ef504f, 0x04bb7364, 0x1c4bb453, 0x610d9fb2, 0x9da01bf4, 0x80fdf0a2,
-	0xfa42b75f, 0x3f005ba7, 0x0d6fc803, 0x7b242bb4, 0xc90dbe88, 0xe7c8697d,
-	0x053bf2a9, 0x5cd7f643, 0x4785a72e, 0xfe434b3f, 0x4feb8b2e, 0xf982efc0,
-	0xae4785fc, 0x5e78e026, 0xce703198, 0xab43e286, 0x7bf3a717, 0x1cffc7d9,
-	0xfed10aed, 0x457feecd, 0x86b4dd9d, 0x5ce5c0f4, 0xdf5bfc0f, 0x8cbedb07,
-	0x821d9deb, 0xcda4efda, 0x5fe77ae5, 0x7acc7de4, 0x2df7a455, 0x2eb965ce,
-	0x0ab61f20, 0x7f28e5e6, 0xe7e11f53, 0x5e3f56e6, 0x2103d9ff, 0xed1841f8,
-	0x804e73fa, 0xacdc5c3d, 0xa35a3f27, 0x8dc47d29, 0xafc31ce2, 0x71cb87b3,
-	0x1e4b7d79, 0x24f3f235, 0x5b17ae2e, 0x39d3f75c, 0x23f3e095, 0x243bd5c3,
-	0xbea53dcb, 0x7947db01, 0xfe479a62, 0x23684b80, 0x964dbfa0, 0x7678c17b,
-	0xf3c864e2, 0x12b90463, 0x18456875, 0xed93abb6, 0x3f8aedb1, 0xe8c8a2a3,
-	0xb75ef808, 0x1a58c8b8, 0x8c8d2f40, 0x6e0ddf9f, 0x01dcceff, 0xafa55a7d,
-	0x459f70e8, 0xf89c50df, 0x433901a7, 0xcab8658a, 0x0ffa518e, 0x70163f3e,
-	0xf38c2c5e, 0x5a67b729, 0xe818dcf1, 0x962b6bb7, 0x6df9c48f, 0x582f5d15,
-	0x3ffa1e61, 0xe739d030, 0xecbe650f, 0xb872f993, 0x43b1f3f5, 0xf6318ca0,
-	0x97823b04, 0xc64e80d6, 0x68fe408f, 0xfb94d4cc, 0x5cb38c43, 0xfd08671e,
-	0xafdcd6fa, 0xe6975fa7, 0x51afd086, 0xc504767f, 0xd461021f, 0xf4211d9b,
-	0xec8213eb, 0xedcf900f, 0x1d49d09c, 0x270f307d, 0x6f611d6e, 0x919ee894,
-	0xf6045ec3, 0x32678bc3, 0x239f6f51, 0x23c7bc0c, 0x608c31db, 0x221623b0,
-	0x6799735e, 0xc50203df, 0x48ee5a51, 0x5c04eea3, 0xa7ad9b8f, 0x3711fb24,
-	0xdc613ac2, 0xb2daf5a1, 0x0ce2a119, 0x274038ff, 0xef02ba28, 0x042ac007,
-	0xc48695c4, 0x63e282cb, 0x38194e18, 0x5a1dabff, 0x7562aeff, 0x35e36afc,
-	0xac30bfee, 0x0427fe60, 0x2eaa1f3c, 0x0bae5f9f, 0xe2a9cf8e, 0xba9d0b5a,
-	0x887c7c60, 0x6f8cb26f, 0x2907b6ca, 0x452d3e0e, 0x64acfde4, 0xc707cf64,
-	0xbd850cbd, 0xc3ea2d0e, 0xf7f48c15, 0x9e363f60, 0x5eff2517, 0x09cf6305,
-	0x7d5ade74, 0x59e9e4df, 0x1cfbf8e7, 0x8fd8e52d, 0x50c3532d, 0xafbe0e3f,
-	0xf09bc4a0, 0x7de04c98, 0x22dde569, 0xe10d62cb, 0x53b77cc7, 0x8797e2b9,
-	0x4b12a6fa, 0x55eeb9c0, 0xdd3ea06c, 0x1e85f2a3, 0x59d6d6f7, 0x1c4fef14,
-	0x82ec29ef, 0xa33b24a2, 0x66aa4879, 0x3cc00764, 0x86fae2a8, 0xce345d94,
-	0xc58c354b, 0xaaa038f2, 0x7076013c, 0xbf184fa4, 0xe30fce2a, 0x76c1c154,
-	0x4deccde7, 0x0de64a43, 0xfccdf9e5, 0x5e39068d, 0x646e46f8, 0x633be91c,
-	0x77d418d8, 0xa69f8b2c, 0xeb04b8f5, 0x34597e81, 0x03c54284, 0x68fb4337,
-	0x5f90ba07, 0xc4dfd1e2, 0x30caef54, 0xc9f74887, 0xb38e6284, 0xf1e4eb10,
-	0xfc467ce1, 0x9507086d, 0x9859f80b, 0xbce0706c, 0xc3000c1b, 0x333d0590,
-	0x56be4026, 0x15af37f6, 0x33308898, 0x4fdc8ddb, 0xe36bbca8, 0x866d77a7,
-	0xff7407eb, 0xcfec30be, 0xfa53bfc7, 0xdb8ef219, 0xfb27be0d, 0x7dfc1ccd,
-	0x951df919, 0xff9b87fe, 0xfb6ddee1, 0x2777d4c3, 0x3267bf70, 0x20e56bd1,
-	0x4cbc12bd, 0x1efc47a6, 0x4abdc2e5, 0x0c77adb1, 0xfb3c37de, 0xfd1d8470,
-	0xf0e303e0, 0xefe5a9dd, 0xed75fdd1, 0x9361e00d, 0x8c0fbe48, 0xafef6e4b,
-	0x02fd171d, 0xbc06dae4, 0x4fe78434, 0x279d192a, 0xcf4ab8b0, 0x000e7489,
-	0x1392a0c6, 0x4013ef01, 0xf10e1b7b, 0xf15baf73, 0xb0710b9d, 0xd02bd45f,
-	0x4255b06e, 0x483b087e, 0xbf19ab49, 0xd5e0ac1f, 0x1a3d07a8, 0xf5c352e9,
-	0x3ea6d9e8, 0xe935cf11, 0xe445fae2, 0x2e68e71f, 0x37e807c7, 0x0bf9d19e,
-	0xce7c926d, 0xdfc4a471, 0xfbe4cb4d, 0x84cfd29b, 0xfe591ad1, 0x47fbd2f7,
-	0xd54e23b3, 0xf2c6764b, 0x442fc5f6, 0x11ecfcff, 0x00d3eaa7, 0xe167d82e,
-	0x2ba9d270, 0xecc66669, 0xd10bacfb, 0xef3b3f9f, 0x807495d4, 0x78d9f68b,
-	0x464614f9, 0x097df8ce, 0x319fd10b, 0xd559b461, 0xd7385bfe, 0xd53cdff1,
-	0xcf21341a, 0x5a36df63, 0xe8c94f39, 0xf3b3ad3e, 0x2e31a797, 0x47f654e9,
-	0xdf482e87, 0xde0b2281, 0x717f9323, 0x9d0f1451, 0x9dd9d329, 0x1452eef8,
-	0x68bb2dfa, 0xfa0d477e, 0x6bfe9fe9, 0x4382f4fc, 0xccca9779, 0x1bff812a,
-	0x2c2b981b, 0x99ee8023, 0x9f9d7343, 0x81b8a603, 0xffd28f82, 0x6960bc10,
-	0xbc4098c5, 0x0a3b51b6, 0x0d0a175e, 0xc70587a4, 0xfd082e87, 0x549cf1db,
-	0x2fd6cfc4, 0x10ba75c2, 0x002a9fd9, 0x9eb79e1c, 0x7c42edd6, 0x1ec176ff,
-	0x3af8eb00, 0xa22bef56, 0xd6a3fc75, 0x027a3d51, 0xdfc5dbbe, 0xe396686f,
-	0xbbc64f50, 0x019f687c, 0x32b9d1dd, 0xfc9e8a5f, 0x05e36548, 0xb03fa047,
-	0xcbf7346e, 0x69d3925c, 0x49cf1686, 0x01f74ba0, 0xfa85ad81, 0xf5976bee,
-	0xeecc9fa8, 0x3d47a33c, 0x19c0eeba, 0xad4bde3d, 0xa9da1843, 0x8477a6db,
-	0x32feffd2, 0x97f2ab5a, 0xd1d77629, 0xe8f5ec94, 0x16abab77, 0xeade1ee8,
-	0x6e1fb9d7, 0x251c32f5, 0xb2df7763, 0x55b8fc9f, 0x98f5eece, 0x477d652e,
-	0xc588ddf1, 0xdceaad2e, 0x089a92c0, 0xcabe3c55, 0x9782ab13, 0xc0eac0b6,
-	0x21b4bb3e, 0xc31df549, 0xef82cf5d, 0xd0fe0e28, 0xd790affe, 0x736db171,
-	0x16bbfa2f, 0xcc7ad4bb, 0x62b5ceec, 0x11ede20c, 0xfece1aec, 0x84b77e12,
-	0x00d2108f, 0x7de60abd, 0xa3d7075a, 0x648c2aea, 0x0c22549f, 0xab595af3,
-	0x7393e3f5, 0x54f45347, 0xa810eeee, 0xbb972ddc, 0x576e046b, 0xa975f2cb,
-	0x8392e38c, 0x75d1a727, 0x37a39f52, 0xa5df0033, 0x88e7e515, 0x437d651e,
-	0xc4855719, 0x290d8df5, 0xddb0e9ef, 0x5817dfa5, 0x4b8d1a6c, 0xa92d47a5,
-	0x1e55c351, 0xd59e905d, 0xbdf943a7, 0xff9d41b4, 0xbef2d1f3, 0x90f2c79e,
-	0x2d18de9f, 0x07189f88, 0xbca53fe1, 0x81ef0277, 0x0f3ad25d, 0xead67d22,
-	0xdf700abb, 0x1175a4bb, 0x7e4394ac, 0xb8afdf1d, 0xce01a2be, 0x751befc3,
-	0xa7de330e, 0x8814adf5, 0x00b0976e, 0xb06d27bd, 0xa1dac13e, 0x7722bf70,
-	0xe4f59cc3, 0x98283d0f, 0x13286f51, 0x83de221d, 0x8fc61c6f, 0x83e6517e,
-	0x1f2fac13, 0x2246caf1, 0x9eca7585, 0x99f6823f, 0xf996b7ec, 0x3d948e30,
-	0xc4bf204e, 0x4371809d, 0xc922a611, 0x37b03991, 0xad9a4184, 0xf920af6d,
-	0xe66f563e, 0x58da62ef, 0xfc70bca0, 0xbe701333, 0x0bb27510, 0xfde87b93,
-	0x9b6d39bd, 0xcc5ca22f, 0x3d1470cc, 0x193df805, 0xf27ffbc6, 0x16bfc175,
-	0x3fcba9da, 0x0ad3f246, 0xd6fd81e4, 0xda3964d9, 0x5acff6a1, 0xc121ae51,
-	0x7ea7cacc, 0x32f89413, 0xc3ed15d0, 0x9fa4a55d, 0x9f7ee558, 0xddb8942d,
-	0x2e7ca0fc, 0xe2d6f98d, 0xd1befaf9, 0xf495f28c, 0xcaabfb1b, 0x5e283104,
-	0xe61a3750, 0x4fada579, 0x5be9de75, 0xe901bf6c, 0x187db82c, 0x395e2abe,
-	0x8a2d7b4d, 0xcc1d77ee, 0xfee8deb0, 0x3ea8d694, 0x8733a4b7, 0x53bbdd07,
-	0xf6d99fcb, 0x777ba0a4, 0xeef74119, 0xddee82f2, 0x2df9efa9, 0xba094e74,
-	0xe7bea777, 0x54cdb067, 0xe6930fd5, 0x9c88e0a9, 0x23f555bb, 0xe7d5cbed,
-	0xbcff8eae, 0x77c74842, 0x2e7d7d06, 0xe0668798, 0xc198e28d, 0x0a2f247d,
-	0x3e1a432a, 0x6984cc2e, 0x0ba1a173, 0x9139a4e9, 0xe386e7db, 0xa0badb0f,
-	0x9788e31d, 0xfc6fe88c, 0x452fe089, 0x9f28c4fb, 0x18fd1953, 0xaf33ed53,
-	0x52be7015, 0x5cf2dbd2, 0x7d61f3b3, 0x494af7f2, 0xdee01dfc, 0x463eb8d1,
-	0xf9036c7c, 0xaf7e55e6, 0x476cac78, 0x5f3ced28, 0x0f353258, 0xcc7fcfbe,
-	0xece28331, 0xf07efc1d, 0xa78f3d4e, 0xe7e55ef8, 0xfa3bf35b, 0xfe008e34,
-	0xf5c7993e, 0xa59c6790, 0xeba91f14, 0xf9165d84, 0x1eaceda9, 0x75d465ef,
-	0x7ee14776, 0xab3ce056, 0x60c9bf47, 0x89cfbcbe, 0xaf68e1fd, 0x743dacff,
-	0x9e6d6d3c, 0x98e3f89e, 0x1eabd72c, 0x91bb72d6, 0xb9e16639, 0x575e4571,
-	0xabe3e7ed, 0xe7e7a85a, 0x1d1a3160, 0x9c836e42, 0xc396ab3e, 0x707ef50e,
-	0xca3d7f8b, 0xaadf900e, 0x4c174b7a, 0x12b7bb27, 0x31f236e4, 0x797573c8,
-	0x17c91372, 0x7caae790, 0x3c80de77, 0xdf0ebfcf, 0x426a769d, 0x8170f38e,
-	0xda78f348, 0xffe69535, 0xf4479819, 0x64333da7, 0xde7cf8de, 0xc65ebe6c,
-	0xb7580fb5, 0x2ebf7ae0, 0xf2f6ebe0, 0x7dfaf230, 0x0a775d79, 0x4c2845bd,
-	0xa270cedd, 0x634625db, 0x387b9e09, 0x1365f296, 0x7eaae1c6, 0xfd3dd02e,
-	0x6e3eeb7f, 0xbf5ffd41, 0xfd05a8ff, 0xa3f6ee61, 0x594db016, 0x8b5a4ead,
-	0x85d03c7a, 0xba9ef51d, 0x7fc22e8e, 0x6eb8fb65, 0x21d95fcc, 0xee3dfbd0,
-	0xd3a71703, 0x135f5938, 0x0e770bc6, 0xf28fd783, 0x37befeb8, 0x307ee24f,
-	0xfb89f417, 0xdf8301fd, 0x801d202f, 0x5ebc425c, 0x35e5f017, 0xb1a373b6,
-	0xf51e9422, 0x1f7cf26f, 0xe867a8d9, 0xef85afaf, 0x52c71c71, 0x488de98e,
-	0xb205fb47, 0x27edddb5, 0xfb604617, 0xfa863af5, 0x17df8285, 0xe21fbd29,
-	0xd6a83ff8, 0x3580a7a1, 0xbe696b56, 0x52d7a83f, 0x74fbda3b, 0xc15e2f04,
-	0xae1c55cf, 0x0929a8fe, 0x56a0fdda, 0x530c7ba0, 0x31f3fbef, 0xe0af1784,
-	0x3d305afa, 0x4c1af42b, 0x3bf4c19f, 0xbe6b4e84, 0xc91e9d19, 0xe4d5ef93,
-	0xe7dc02b1, 0x59a7dd61, 0xe11e7e91, 0xae2be3f7, 0x7fa1d61d, 0x6cc9bd33,
-	0x31e0027f, 0x0b7aff5a, 0xbcc389ca, 0x8776b0bc, 0x748de5c0, 0x5261f237,
-	0xbda19eb3, 0x971e7efb, 0x7ae3ef4b, 0xfad0e3c5, 0x31af8c05, 0xe51d37b1,
-	0x4f1c9a52, 0x2ac7457a, 0x905c53f6, 0xaf319bcb, 0x96ef54d9, 0xbd71e537,
-	0x40839143, 0xe4fdaee6, 0xc44f6d97, 0xcb2f147b, 0xe55341e7, 0xfa32b2f6,
-	0xf485cfa7, 0x672f4caa, 0xf8143c64, 0x6cff4cb2, 0x1f68cfdb, 0x59c72d9f,
-	0xd1743666, 0x833ccc79, 0x879453eb, 0xabdf52b3, 0x39ae7dc5, 0x3a7cedfd,
-	0x25378d67, 0xc9fbe226, 0xd27877fc, 0x60d6dba7, 0x9c372fdc, 0xe0ec31d6,
-	0x381e7453, 0x35bc6b2c, 0x49439c54, 0x7a2557dd, 0x6aeeb08f, 0x3c0aa53a,
-	0x7d39d0f7, 0x1701d91f, 0x5c9f13a7, 0x2ddea9b5, 0x7bc654fc, 0x5d3ef28c,
-	0x80f3f727, 0x8b8b169c, 0xf329eb06, 0x1c659e80, 0x2ed6586f, 0xab35af5a,
-	0x75a92158, 0xcefe29ec, 0x0149ed66, 0xa458bddf, 0x304ce873, 0x608defdf,
-	0xfc8b1f25, 0x3657241d, 0x748c4dc6, 0xd784fb2f, 0xd7af704c, 0xaf29f046,
-	0x61ade944, 0x687c88ce, 0x4f11e167, 0xe1dbce16, 0xde275694, 0x8ef0bc57,
-	0x336ba64e, 0xd32e2fbf, 0x2d4ee5da, 0xeb9c6233, 0xc2e3e800, 0x5cf7fe20,
-	0xddfba44d, 0xa0fec3bf, 0xbf0d959f, 0xaf677921, 0xed1d38b9, 0x33dac2a2,
-	0x1bbb084d, 0xf51d3cfe, 0xff610f89, 0xf41ebd20, 0x72809b7b, 0xd3bd24e4,
-	0x8635795d, 0xd35979da, 0xcbf91d3f, 0xf740a6f7, 0xb8ec3e6f, 0xfdf2b7a8,
-	0x7873dc89, 0xf2fd1c2f, 0xb9a3f2b3, 0xd42ce91c, 0x243afad0, 0xddeb3bd5,
-	0x0a2bffa3, 0x20d8c3d7, 0x7e0a7afd, 0xc865a3df, 0xfb4a9bbf, 0xe421cca3,
-	0xdff469ef, 0xb071f365, 0x15e5a1ec, 0x9e165f7a, 0xe990ac93, 0x3cbcb838,
-	0xa13fc07f, 0xebefca73, 0xa1fe0108, 0x3fdfc62a, 0x2ba7bb05, 0xaab8f81c,
-	0x67f92a73, 0x0dc23caa, 0xd1c333fd, 0xeb4dd7e1, 0x28cff718, 0x818dda30,
-	0x1bb44d7e, 0x1f7faa99, 0x252b077f, 0x74f786f3, 0x14897ddc, 0x666bafcf,
-	0x795aef14, 0xe7a53475, 0x2120df5f, 0xfbc318ff, 0x6b7ee95b, 0x8cec86b6,
-	0xfeb53e95, 0xcb80a533, 0x7c052985, 0x60f95cde, 0x01b0e52f, 0xa2ec097b,
-	0x5db9f37b, 0xa9887514, 0x7ce0a5ec, 0xf28c97b2, 0x13101d3d, 0xe04257ae,
-	0x6941477d, 0xca977e0d, 0xd9ce885a, 0x72fefc3b, 0xe4d738f0, 0xf8553e73,
-	0x35f2317a, 0xe7076fd2, 0xe776e0eb, 0x41ac9415, 0x4c38da3e, 0xe65cab7c,
-	0x8c6d95fb, 0x16ddcbe6, 0x05f4f343, 0x0296736b, 0x78017e5d, 0x0bd23de0,
-	0x3444674e, 0xe5c17f7c, 0x3df3c08c, 0x6ba81c8a, 0x36efa70b, 0xc58bce66,
-	0x48cda373, 0xf9ded0f7, 0x9c46a98e, 0x38da7be7, 0x7dfd29ff, 0x1638b5d8,
-	0xae8269f9, 0xf2876f5f, 0x5133cee4, 0x784df7a8, 0xf22c7e7d, 0xfe7870e1,
-	0xcf1918fd, 0x1e12c486, 0x70bd8797, 0x004f6ca2, 0xba27ee7e, 0x87fa9de8,
-	0x6fd1181a, 0x56ffabf7, 0xbe7c7c87, 0xfb8cc233, 0x230717e6, 0x0bcabde8,
-	0x3de81a6f, 0x7df95a9a, 0x7d742fd5, 0x7cbf4873, 0x22f74b5d, 0x47fe6fdd,
-	0xfba3f22b, 0x3b9d0355, 0xc373a87c, 0x6af7dc45, 0xc39c673b, 0x5f6b5677,
-	0xc3f2dbfa, 0xd25486ca, 0x3ff8148b, 0xbe2746bc, 0xe45e7bf3, 0x8ea1e272,
-	0xf77d217f, 0x0b976ba1, 0x17ca7cf0, 0x44c7ff07, 0xb7ee6b94, 0x79444f2e,
-	0xe5c5fee6, 0x7eee5889, 0x4a13c22d, 0xc05eb95f, 0x7eca3efd, 0xa8aef699,
-	0x90ad0ff2, 0x5d6d23e9, 0x3d07bd0b, 0x7b02e4e1, 0x130fbbe0, 0xac4e34b2,
-	0x65b7e13f, 0x7c05f7b1, 0xa457aeb7, 0x93f8e338, 0x01d51165, 0x814f7974,
-	0x7e2ff14e, 0x930ebf23, 0xf019c7df, 0x77f2f4e3, 0x8af6367f, 0x1aa37dfc,
-	0x83a1ee81, 0x5ee432fe, 0x8affad1a, 0x88df7a58, 0xc73bce89, 0x8b38478c,
-	0x3e6205de, 0x00ccd1e3, 0xaf71693d, 0x7400cba6, 0xe869d154, 0x57befd22,
-	0xacb0433c, 0xf173dd3f, 0x2134c8d3, 0xe7267f84, 0xe39434d4, 0xf81a7ec1,
-	0x8ade2245, 0x71e955be, 0xc1fe20a5, 0x15a59bfe, 0x287f9077, 0xd6937fd8,
-	0x8f666a2b, 0xe9dff7c7, 0xf78c2f3a, 0x8bf22369, 0xfae287a2, 0xffc1081d,
-	0x3970c66b, 0xbad5f0a6, 0x5dff1e5e, 0xcc6a5bd7, 0xe656b484, 0x9db003ab,
-	0x75fda0fa, 0xa377f39d, 0xb5dd611f, 0x60631145, 0x3bbdd6be, 0xfc813d8f,
-	0x66352e6f, 0xeed777e1, 0x1fcc2e30, 0xfee097a4, 0xf2e18ca6, 0x184f4072,
-	0x97cbdf66, 0xed5bfaf1, 0xe463397f, 0x87ff6cf3, 0x87607fef, 0xedc31d8f,
-	0x4fdc25f0, 0xe0f0edc2, 0xc791437d, 0x792ebb4a, 0x63ca879d, 0xc04877fe,
-	0xec79265e, 0xbd51231a, 0xb1b9cee4, 0xbbbf4764, 0x0d325620, 0xb4433f6d,
-	0x87f2626b, 0x71e8afb6, 0xa8e39f6e, 0x871ced11, 0x1749fb96, 0x99bef408,
-	0x9db9f7a2, 0xeee3e902, 0xeb1f9d4a, 0x2ef57829, 0x85d57ee0, 0x4c3f9d0e,
-	0x150fd418, 0xdca071fd, 0xa2b9502e, 0x637a2a4f, 0x71fb93af, 0xe5e78c17,
-	0x16b986b7, 0xd87d7ce1, 0x13f94615, 0xc67cf126, 0x0093479c, 0x813df45e,
-	0xfacbff11, 0xc1a742a4, 0xcea5e6fa, 0xd7be1b8c, 0x4fa64db3, 0x8352cf85,
-	0xbfd943f8, 0xdd39f39a, 0x1dfee1d7, 0x7ff7fb8b, 0xe0f2f4aa, 0x7eff6176,
-	0x466ff108, 0x1fbe121d, 0x19d15bff, 0x4aff3eca, 0x5efe0bd6, 0x23debf59,
-	0x72af8825, 0x7db8764e, 0x6fd64eb5, 0xce6f2b86, 0xbcfc7aff, 0xdfdf1e47,
-	0x8e779f8a, 0x9f43bff9, 0xf50bd01d, 0x4779c7a1, 0xc64fc941, 0x6b86bcc0,
-	0x739e743d, 0x1ecdf7b8, 0xb055f595, 0x7c745573, 0x41af4534, 0xc35dc8bb,
-	0xd1cd03fd, 0x7ec9afd2, 0xf7a5ae39, 0xef921e57, 0xd5783e73, 0xea2d694c,
-	0xd92e90c9, 0xd9de927b, 0xc6a3525d, 0xb77d19bf, 0x34aafdf8, 0xb157eb8a,
-	0x552bf232, 0xf19b4675, 0x7c737fbc, 0x2be431fb, 0xb4ad6edf, 0xc6feb03b,
-	0x237d72d1, 0x44d5b7f7, 0x618fdfd3, 0x95407a41, 0x57df5827, 0x645305eb,
-	0xfa70d13f, 0xc3ba2fc1, 0xd1e95cb8, 0x39d79f12, 0xd055dff9, 0xe0b97277,
-	0xbf23086e, 0x886bda09, 0x820d67d7, 0x5f3ddf1f, 0x4cfbd729, 0x13ff25ec,
-	0xcaa0d3c5, 0x2ca7ceb9, 0xd4dfb20e, 0xbb95a3f1, 0x33724b7e, 0x73148e38,
-	0x0d0b8e40, 0xd2268dc4, 0x60959079, 0xbc9fe24f, 0x5dd24b72, 0x1f80ff38,
-	0x71dc93f3, 0x9730fca8, 0xfb223e7a, 0x3cebc973, 0x7e2433fe, 0xc7933cd4,
-	0x95ddf08f, 0xa5c87e10, 0xc51d8f23, 0xb374a3bf, 0xc75d51b8, 0x3247ba49,
-	0xd208ff44, 0x518dae3b, 0x8a4719fb, 0xb23b8fdc, 0x7fa33053, 0x8f3ca46a,
-	0x9c31b77f, 0x7fe9eaf4, 0x79458ea8, 0xf9d3aca0, 0xcf5e7cb9, 0x04a5707f,
-	0x07f89bbf, 0xe3061cd1, 0xf507c5fa, 0xb0e249bf, 0xbbf09464, 0x63b408fa,
-	0x7561ffce, 0x2febce04, 0x2fbfc520, 0x3169daf1, 0x2bd23fa4, 0x0fd82dcb,
-	0xbfc80ba3, 0x45a5fb2c, 0x07230fd8, 0xdfc139fd, 0x6bbf976d, 0xfc853306,
-	0xf8f3af98, 0x6b82737e, 0xa6cfc126, 0xa61efe33, 0xffcefc83, 0xfe8d7402,
-	0x2c183ca2, 0x1a7f9fc6, 0xbc61d6ce, 0xf5de39a8, 0xb3d1f136, 0x08f9091a,
-	0x9338a7be, 0xfb44bf6f, 0xc6194e23, 0xfcf40a73, 0x0cea465d, 0xbcb46bd6,
-	0xc760098e, 0xb0093c62, 0xe6f18059, 0x53ae393c, 0x6c44ce10, 0x6b9d49ff,
-	0xf997be13, 0x5f68b764, 0x8f604c4b, 0x83bf77c5, 0x83824be3, 0x3895c5c7,
-	0x1f1f1293, 0x6024ce2e, 0xee9c053f, 0x8715b9f8, 0x25737180, 0xe7bec49e,
-	0x635720a4, 0xf7ce87b1, 0x48c8533f, 0x718b7fae, 0x21f9259e, 0xc83548e2,
-	0xd5cf2463, 0x394dc571, 0xfe9d10af, 0x3dc4f1b5, 0x1cb7d863, 0x13f3e2ff,
-	0xe8f8f78c, 0xb7b2164b, 0x51effabe, 0x5e76cfb4, 0x42f0fda6, 0x8fbe41bf,
-	0xecfdc7d0, 0x2ff23a9d, 0x2dbb005c, 0x3d9f603e, 0x3ddbcf9a, 0xe89539d4,
-	0x596f40ff, 0x2f3fd604, 0x777c6fe7, 0x48d9fcc1, 0xbd22bd97, 0xe3e78b07,
-	0xd03b0ed0, 0xbd404e2b, 0x975c5be5, 0xb1098fef, 0xd0f0c62e, 0xcbe44cef,
-	0xc05f947c, 0x07ea63e9, 0xd772fedc, 0x598a38f3, 0x72ee0b96, 0x63c1c93d,
-	0xf1411629, 0xc5435b9f, 0xa7ef5e59, 0x856aa37d, 0xbe1cf740, 0xa3a59c71,
-	0x82b7de5b, 0xd3e5d3fc, 0xe70e6e49, 0x9b880eb7, 0x15b7caab, 0x23879c0c,
-	0x815475ff, 0xe31dc699, 0xb3c12c29, 0xbff8ca87, 0x73b875c5, 0xfb3a086c,
-	0x695fdb16, 0x9fdb6eff, 0xb6ddf792, 0x6e3be6bf, 0x77de6d7f, 0xf1dee71b,
-	0xf57fe31d, 0xccff6e3b, 0xaf3f3c77, 0x73ffffe5, 0x70700300, 0x5cf83f9c,
-	0xdfbc7040, 0x1f3efc70, 0x36106d96, 0x6a4177f7, 0x42b57a8c, 0x462d5100,
-	0x0877a2ef, 0x71e24d66, 0x46658db0, 0xf0610eff, 0x5f32807c, 0x1db90b4b,
-	0xe8bfce61, 0x4e79858b, 0xc596f475, 0x126c9fa2, 0x82fd877f, 0x132acefc,
-	0x18cef4cd, 0xfbc04cd4, 0xa161cdf1, 0x7261aae3, 0x23edc37b, 0xdc9617cf,
-	0xfe9e3631, 0xfbc8436c, 0xfec82f1d, 0x23077347, 0xa51324bf, 0xafd47984,
-	0xd0fa8094, 0x3f3c2388, 0x76398baa, 0xda525e10, 0xa507b23c, 0x8b6fc434,
-	0x998def1c, 0xfe869d99, 0x0bd018e8, 0x14f81e31, 0x8e2905c6, 0x4a7aa665,
-	0xe58c1f7f, 0x31d16dfd, 0xe55bee81, 0xac4cf3f2, 0x9e2aa0f9, 0xebae8ef7,
-	0xc50265e3, 0xfe2396f3, 0xe574d2bf, 0x89934cef, 0xff37e618, 0x8ce29980,
-	0x48bd2627, 0x8956777f, 0xf331adef, 0x6ed1872a, 0x1cd63c06, 0xbbf4471c,
-	0xf7a4d0e4, 0x7733e9f1, 0x750f68a6, 0x17f1514f, 0x1dfd969c, 0x8940bf8a,
-	0xf65efd6b, 0xfe887c93, 0x221fba17, 0xab1dea51, 0x27f7b6f9, 0xfc10d8ef,
-	0xfee045bf, 0xb8afdf21, 0xde9c687f, 0x6e78119e, 0xaf3cb372, 0xdc78bacb,
-	0xecf7f142, 0xee33c793, 0x01976d11, 0x4d71d2f6, 0xcfb8f463, 0x094a6b8f,
-	0xe1c0b4c7, 0xf07de0d7, 0x35fbd5c5, 0xa285faca, 0xb2b1d6a3, 0x9fa7a31f,
-	0x12ff7ae2, 0x60ffe714, 0x30bf3f2c, 0xf1e390af, 0x0824d801, 0x1b12c9af,
-	0x711c7d51, 0x2a1b598b, 0x7605549e, 0xacb9e231, 0xccade399, 0x34975577,
-	0x7339fb15, 0xd309bfb4, 0xa9b49aa2, 0xbdaf6fe4, 0x9bfa84d8, 0x63e5dafb,
-	0x4cbf93b7, 0x713da12f, 0xefda9f4f, 0xa5a30ab6, 0xfd2784f1, 0x0cdf5a9d,
-	0x71e3ec91, 0x9fa24433, 0xb230aa98, 0x4c74635f, 0x2e78426b, 0xca8a8bd7,
-	0xcc22a6e3, 0x3e934416, 0x4523d458, 0xe83f97df, 0x51998b07, 0x74f38f1f,
-	0xe2aaf8b3, 0xcc35bb4f, 0xe7ae1af1, 0x5d5f1b5f, 0x74bbcef9, 0x971954ae,
-	0x9c4a2f32, 0xaaf8b874, 0x5dc1ce72, 0x2e75457e, 0x4ff62dc3, 0xb8e3ff47,
-	0xf2f46783, 0xfe334b39, 0xfe25611d, 0x8bf5ee3a, 0xe2557714, 0x45cf6eac,
-	0x3be1abd2, 0x0e3f7e3d, 0x06213f96, 0xf1e217df, 0x9ef157d7, 0xffef1e94,
-	0xd4bee999, 0xc5fdf21b, 0xe63f184e, 0xa1cde9bf, 0xa76bcbb4, 0x98b790f4,
-	0x45e77752, 0x387ed78a, 0x53ef1d56, 0xb49779e2, 0xd56333ce, 0x0e0923e7,
-	0xc369f78e, 0xddc6bfb9, 0x97bfa3a3, 0x48c77ee1, 0x73a4bbf2, 0xfaebdd19,
-	0x246ba4f2, 0xf1875de2, 0x38ba00b6, 0xe187b0ef, 0x9de7613b, 0xb38c30f6,
-	0xa73eeb8d, 0x752ff3c7, 0xfd1eaf62, 0x12718061, 0x1f744d1e, 0xf7cfc8b8,
-	0xdfd09676, 0x5c69bae3, 0x136fe3ac, 0xe59ffb17, 0x00210141, 0x00002101,
-	0x00088b1f, 0x00000000, 0x17b5ff00, 0x67534c5d, 0xb7b77cf4, 0x0bdf96e5,
-	0x72223f2a, 0xa29862c1, 0xa740c2dc, 0xac741631, 0x4a8a5c13, 0x66b50102,
-	0x2d09922e, 0xcbc2ccd9, 0x01893ad2, 0xb8b2c3dd, 0x26a9f364, 0x87b6e883,
-	0x6ead93fa, 0x840b0b55, 0xc3e22e25, 0x52c9719c, 0xba33330d, 0xd8dc6281,
-	0xdf39d85c, 0xd8bdb5bd, 0xa4da2cbd, 0xdf3f3d39, 0xfff9df39, 0x0730000a,
-	0xb956e7da, 0xf84ce706, 0xffc6cfa5, 0x4fa43d0f, 0xbddde38c, 0x1726eb4b,
-	0x3ebbf1c4, 0x036935c9, 0xce9c5df8, 0xf6002b94, 0x1c5ace87, 0xaccf1f04,
-	0xedfc2176, 0x4ab5dfc2, 0xd2f7803a, 0xee202d4c, 0x96a666fd, 0xd2afdef8,
-	0x4fe9027a, 0x8ed77bdb, 0x70045e97, 0x106b4196, 0xc12e55f9, 0xb8e08271,
-	0x4546fac3, 0x25c06e5c, 0x80fce938, 0xe89b34ad, 0xd9a55cc7, 0xf5f4137b,
-	0x00674539, 0xdaaf39e9, 0x09f489ac, 0x06a019bb, 0xc15c0ce9, 0x556bf624,
-	0x7fdfdb81, 0x4a4f2ad2, 0xdbf11c7a, 0xe036cc1d, 0x3c8150de, 0xf7c71e59,
-	0xfc028fd3, 0xd422666e, 0xb9e97402, 0xd77264b8, 0x3bafa8aa, 0x52816a3f,
-	0x5c5b4ca2, 0xdf5e30ab, 0x12acfd4b, 0xbefcf860, 0x170568e2, 0xa0172095,
-	0xe0373f4d, 0xb19c5bdc, 0x3d7fc010, 0x4698ca05, 0x4adf9113, 0x2a8e143f,
-	0xa769da22, 0xb6e5785f, 0x4c27f7fc, 0xcdba11ab, 0xbdc268fe, 0xc3829dda,
-	0x2eedc99a, 0x7920ce6d, 0x212fce31, 0xb74bd3a5, 0x51cc22ad, 0xf413e428,
-	0x025ac217, 0x36ada8d2, 0x0406ef6e, 0x7ca1b07e, 0xa488539b, 0x70d69da0,
-	0x6f50044a, 0xdf045395, 0xcd7b088b, 0x7c461281, 0x2be726f1, 0xbf11366f,
-	0x042aae4f, 0xcbe7e3f4, 0x09417916, 0x3464dfbf, 0xf3aa8e21, 0x3c52fed3,
-	0x953176af, 0x34ef6adc, 0x4193f1f2, 0xe3d6ee7e, 0xfc3433b2, 0x5ff72172,
-	0xcb9e0136, 0x8e38031d, 0x18f67776, 0x756eedcf, 0x3f7461de, 0x337fa0f8,
-	0x904d81ca, 0x6bde8907, 0x3b3aa394, 0x001ff18d, 0x43d62670, 0x0d41d537,
-	0xe7e1c641, 0x45d513e8, 0x582a0615, 0xbf373f11, 0xf974467e, 0xf062faf9,
-	0x5117f10c, 0xd80d567d, 0x024dbf28, 0xf5e10194, 0x9f412d92, 0x9eb9155f,
-	0xfc01650f, 0xde17d728, 0x7e30c83e, 0x915f8f7d, 0x4a6e505a, 0xd2ca97ae,
-	0x32f7b8e3, 0x401653d6, 0x036cf0f5, 0x9858fbc5, 0x794d1581, 0x28bef1f3,
-	0x6eb17d57, 0xbc4ead9c, 0x31dfe6a7, 0x3a44f9cc, 0x0d9a81d5, 0x61205f9a,
-	0x5817fcbc, 0x55ed1060, 0x491c3d35, 0xb2b9f8a3, 0xec8532d5, 0x23a50ed8,
-	0x6b126dee, 0x3c2ee118, 0x160ef840, 0xf6e7f090, 0x005b9d2b, 0xd8b754ed,
-	0x5bdc52af, 0x15aacc3a, 0x40dade88, 0x50596bf4, 0xff122937, 0xc4a97bc4,
-	0x55aa672f, 0x9eb3be21, 0x445f8df8, 0xade7aa44, 0x7865a514, 0x8d28cbb7,
-	0xeac1b37d, 0x551f500e, 0xf411a337, 0x3587476f, 0x84b5fe40, 0xce90cd9b,
-	0xbea041eb, 0xedcf5b7b, 0x328f45b7, 0x099f48a3, 0x5f916757, 0x16d3cc0b,
-	0xea356115, 0x7841c82e, 0xb005bee1, 0xb4e2bc1f, 0x73b94645, 0x05ac4c3e,
-	0xc49f4be0, 0x8327c861, 0xd7c03963, 0xc30e7cbe, 0x2fd3853e, 0x8c39cafa,
-	0x470e54f8, 0xa8356b7c, 0x959e3cca, 0xdd02fbe1, 0x7059a727, 0x7e6f9b25,
-	0xf9623ebd, 0x29ef0baa, 0xba3e7ba6, 0x93962eea, 0x5a20c7c8, 0x6ad6142c,
-	0x6730c9fd, 0x06c3e75e, 0xe881e3b2, 0x60a73a61, 0x460d61be, 0xef308421,
-	0xaa6febbf, 0xd96f9b52, 0xf193b802, 0x04faf467, 0x3cd02287, 0xfad24b7a,
-	0x5fc5787f, 0x48529e3c, 0xf31eb2b9, 0x413719e6, 0xd48fd20a, 0xbe7f736b,
-	0x4f18eb9e, 0xc0ddb8c0, 0xcf9c1278, 0xcbf8b56f, 0x74ad1f28, 0xa7e7248f,
-	0x0ac4faf4, 0xb432bb30, 0x4fbc329c, 0x600e6c47, 0x8f30b220, 0x4916211d,
-	0x19df3ec5, 0x244774de, 0x96e0c3d8, 0xd73c7e71, 0x46e6d87d, 0xb6f389a5,
-	0xf9268d33, 0xd54a5c13, 0x34592ce2, 0xf6d56fd8, 0x8b5d935a, 0xb56e0c73,
-	0x9471756b, 0xfbeb059a, 0x381679e8, 0xa9e7fd88, 0x734ebb18, 0xd001cf2c,
-	0x93c7c38b, 0xd1311e9f, 0xef990f3c, 0xd8e3993d, 0x0c8a791f, 0x3794391d,
-	0x41f6260c, 0x24077e81, 0x63946dc0, 0x6e611c91, 0x192dca25, 0x9f7d259f,
-	0x2f6e15d8, 0x01905777, 0xfe0450ba, 0x465f3483, 0x1a77502d, 0x639d77ed,
-	0x3bfa9070, 0xf70502e0, 0x1bf1e8fd, 0xdd214f87, 0xb4c98e73, 0x5783ba8e,
-	0x16ef9ef9, 0x78ff7827, 0xbc2d77c2, 0x3537831e, 0x0239887a, 0x403af249,
-	0x6eed1dfb, 0x6e687f46, 0x05301f74, 0xc36ed052, 0xbdafad39, 0x41404b0e,
-	0x1de8ac7c, 0xe79df091, 0x1cd1e419, 0xa5162653, 0x1980ff11, 0xafdc2502,
-	0xfd84baa6, 0xfc855f84, 0xd8cfed8e, 0xf4c0f1fe, 0x6bd52158, 0x0a235327,
-	0x8cb73fdf, 0x922f05fb, 0xed2fdf1b, 0xcd3361a1, 0x0643dc1b, 0x868eddb9,
-	0x713f343b, 0x4be918cf, 0xf9e7df0e, 0x53af2880, 0x7e062fdc, 0xe1633d8d,
-	0x58092c6d, 0x38731509, 0xca5536cf, 0x6eaddf3c, 0x1f18dcc6, 0x91757049,
-	0xc991709f, 0xc7e76f34, 0xf5aed1ab, 0x419fa341, 0xc877e62f, 0xd0c7d5a2,
-	0xa3f0163a, 0x94a2237c, 0x7b8ba1f7, 0x1cfd0cfc, 0x40aa62aa, 0x8c2120f1,
-	0x3e3d16c7, 0x6e1f802f, 0x70a9fc4b, 0xe01aae6c, 0x2b61ac35, 0x5ea353d6,
-	0x6e01000f, 0xd4e3f9a7, 0x8e23bd08, 0x2af9839a, 0xf9f8977f, 0xe055677d,
-	0xe814d4fc, 0x6bafd649, 0x6ab375ec, 0xf33dc90d, 0x7b2ed3f7, 0x47d3f792,
-	0x3b2276f8, 0x244ced7b, 0x2bbe30bf, 0x15efbfa9, 0x411ccb5d, 0xb5c981f4,
-	0x5975ce8f, 0xbea9ab22, 0x1cdc981f, 0xee91f18f, 0x8b82fda1, 0x91f516ef,
-	0x87cf8c00, 0xcc67e523, 0xa2769794, 0x125beec7, 0xe9b8e397, 0x0aa1fc69,
-	0xa1efdacf, 0xfda79aca, 0x17fa867e, 0x7f57cfab, 0x1dbcb26e, 0xa497f9a2,
-	0xe7d27e7e, 0x9912c01f, 0x3893cbf7, 0x6487b683, 0xaa3c75e0, 0xa67ef5ef,
-	0xc87b48fc, 0x06199dff, 0xed5cf895, 0x7ff4d0cf, 0xc18beba6, 0x9bf61d51,
-	0xf6f9b935, 0xfc39f427, 0x8a71c98b, 0xa4f2bdee, 0xdf824a00, 0xa0a982ab,
-	0x195df824, 0xf6e031ca, 0x7c8362c8, 0x81a978f5, 0xc2b1335f, 0xbd735fc0,
-	0x14bf80ca, 0x5f90675d, 0x01bd6bff, 0xc5bd30df, 0xcff1bf20, 0xd63c066d,
-	0xb95875bf, 0x4936e789, 0x0ae41baf, 0x157e8d3b, 0x2afd18f5, 0x15fa35ee,
-	0x37e25bd3, 0xdfacb7fa, 0xf64e5fe8, 0xde855c83, 0x91fcffa1, 0x2060fb49,
-	0x34f3c33c, 0x13029d35, 0xa8c44734, 0x66c21fb6, 0xf0a617be, 0x84a2e2ff,
-	0xd7a72c3c, 0x0919da3f, 0xb9d2b32f, 0x2b369d0f, 0x512edbbd, 0xfe3e600d,
-	0x2e76d705, 0x000ee017, 0x00000000
-};
-
-static const u32 csem_int_table_data_e1[] = {
-	0x00088b1f, 0x00000000, 0xe3e3ff00, 0x51f86066, 0xb8d3c10f, 0x72361818,
-	0x0143f821, 0x684333b7, 0x0606163e, 0xc77e2001, 0x9ef0c0c8, 0x38330491,
-	0x207eec10, 0x27880abb, 0x7dcf5071, 0xe52f1143, 0x5f5d9fa1, 0x153d76a0,
-	0x837f7818, 0x031083b0, 0x03309b83, 0x8408b483, 0x55045fbf, 0xc10851de,
-	0x99412e7e, 0xfa819f5d, 0xbbeb8d01, 0x00038031, 0x00000000
-};
-
-static const u32 csem_pram_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xd5547c0b, 0x733ef7b5, 0x9993331e,
-	0x420f264c, 0x084f0042, 0x21842a20, 0x38880840, 0x8d069009, 0x8808089a,
-	0x420100ca, 0xa9113248, 0x676d5e97, 0x6ad11422, 0xa36d2d1b, 0x4101da97,
-	0x180d45a3, 0x1d0340e8, 0x5abc414c, 0x5b4a0a8d, 0x3c3141b5, 0xe878490a,
-	0xef5bd6c5, 0x33ef6b5e, 0x42667399, 0xfddfb6a2, 0x7f17dfbe, 0xecfb36fe,
-	0x7b5ef673, 0x7b5affad, 0x231fb5ed, 0xd313c659, 0x057c8415, 0x7213d77f,
-	0xf4842448, 0x0b3b4eeb, 0x108e3a68, 0xb0398e7f, 0xb4242055, 0x24edefef,
-	0x4db39085, 0x267355b3, 0x98c7fb21, 0xf2d3d743, 0x80fc81b3, 0xdd4f9699,
-	0xd121c479, 0x514ed57c, 0x3ed37282, 0xb1df7e2b, 0xde400851, 0xf1fd6e6b,
-	0xb5df34b5, 0x699b2453, 0x376424d5, 0xda425491, 0xa9fd842d, 0x6a5f98f1,
-	0x4daad965, 0xf682effb, 0x626683ca, 0x37b7dfa5, 0xafc86e89, 0x08042adc,
-	0xf76aaf6d, 0x5a00ca83, 0xd080b2df, 0x7e695568, 0x1a8a63eb, 0xfb03c84f,
-	0xb368ecfe, 0x67da7213, 0xfd82aa21, 0x491c6f28, 0x7b604548, 0x7dfa00e1,
-	0x65c136c5, 0x6c57f5a2, 0xf401d73c, 0xc3c93455, 0x8adf5a44, 0x47511b06,
-	0x22bfb6b0, 0x07cb5ed0, 0x794eded8, 0xfe57b428, 0x110a3de5, 0x1bb29fa1,
-	0x74a2abbe, 0x76b5bf40, 0xb1eafb4f, 0x559f8d3d, 0xe8f6d1cf, 0x0a2fd57b,
-	0xb562e82e, 0x8e807889, 0xb9d6dd8e, 0x7fa1db4f, 0xf8f0cab5, 0xdc2c7ec8,
-	0x08a8fd05, 0xed0a526c, 0x6526df40, 0xfaeec8e9, 0x87fc3456, 0xacfabe9e,
-	0x72889efe, 0x47da7a63, 0x3bbc3a59, 0xbb88415f, 0xa44bd691, 0xaa3a5280,
-	0x4207f9fb, 0xa1e32122, 0x96a8917e, 0xe4a9faee, 0x23fe0711, 0x0f949ff4,
-	0x81f1bdfe, 0x72dd99ad, 0x9904e95b, 0xbcedcb75, 0xea51cb93, 0x5fac8dca,
-	0xf20c7f4b, 0xf9d4f4a0, 0xee3e989c, 0x8374c34b, 0xfdbe454f, 0xd30237dc,
-	0x9f0b9f7a, 0xc3cbe93f, 0x8dcfa374, 0x22be53e9, 0x12be034c, 0x6fb36f7c,
-	0x7c5ba62e, 0x8cfe7c1e, 0x06d31caf, 0x7f3e0d5f, 0xd31ab7de, 0x3e3f3e6d,
-	0x1eb7d17f, 0x1d5f46d3, 0x5e403ba6, 0x05f26d34, 0xbe5dbdf0, 0xbe834c06,
-	0xc7be7c46, 0x11f4c417, 0x64c747ce, 0x3e512f92, 0x49c4dc38, 0x8a924ec5,
-	0xcd32f9dd, 0x7cb09527, 0x7cfe1dea, 0x3d53e685, 0x32f94f34, 0x6f9432a0,
-	0x3501f9a6, 0xfdf07cac, 0xf342c0a4, 0x7cacfd83, 0x02ee23c8, 0xa90fcd2b,
-	0x37c3e563, 0x68e20bfa, 0x9580787e, 0x542dbd5f, 0xabf9a360, 0x7679591b,
-	0xa76a9933, 0xcb10ecf9, 0x9ee1bce7, 0x39f34f1a, 0xfb9f2cad, 0x83aa7f81,
-	0xd8db73e6, 0x04ce93f7, 0x2d1ed544, 0xbab21d87, 0x6d595098, 0x4b70cff4,
-	0x515e6913, 0xca2e21ef, 0x6eadff1f, 0x43f29d29, 0xc8796376, 0x9bcb1f3f,
-	0xbf963714, 0xfcc32fe3, 0xe583d92e, 0x2c55fdc7, 0xfcb078af, 0x98bdff73,
-	0x2c7eca0f, 0x58fad4b7, 0xf963f15e, 0x58f5da80, 0x80391eff, 0x1f6b23e5,
-	0x4a3df2c3, 0x5f1fcb00, 0x1a7ba4fb, 0x3c11afcd, 0xd23c073f, 0x01649cb4,
-	0x4ad31a9e, 0x09d69e28, 0xf7e02e64, 0x8a3a0007, 0x0ae975cb, 0x3f8ee1ea,
-	0xfa0d3ee4, 0x90297f8b, 0xc3ccfa5f, 0xaffdf899, 0xd6991eb0, 0x4f5ef623,
-	0xba799bce, 0x2cde727a, 0x8069ead7, 0xfb58d6f7, 0x378ecf56, 0x79e9e927,
-	0x67ab42b3, 0xdf13d23b, 0xbce57eb7, 0xcf4f5935, 0x3d5a955b, 0xc49e907b,
-	0x74d3d1be, 0xa69fcf44, 0xb4fe6123, 0xfafd3d20, 0xf7b8cf46, 0xf719fcf4,
-	0x6f3f985e, 0x7de93d60, 0x3de9a7ab, 0xde9a7f3d, 0x08e7f30b, 0xdf506bf6,
-	0x7dee35fa, 0xbdc67f3d, 0x47cfe61f, 0xdf664f48, 0xa1f5d9ea, 0x3ebb3f9e,
-	0x04e7f30c, 0x6fac33d6, 0x48fdcafd, 0x8fdc9fcf, 0xc2e9fcc2, 0x5beaae7a,
-	0xd23ebb3d, 0x47d767f3, 0x817cfe61, 0x5bea8cf5, 0xa2ff72bf, 0x5fee4fe7,
-	0x0931fcc2, 0xbe98cf50, 0x54fc13d1, 0xa7e09fcf, 0xb0d8fe61, 0xa37df19e,
-	0xcf5daf27, 0x30f6bc9f, 0x9004527f, 0xd5bec4fb, 0xf3d76c13, 0xe61ed827,
-	0xe7ac20cf, 0x2bf5beba, 0x3f9e84ef, 0xfcc22779, 0xcafd8e19, 0xf40f7aa7,
-	0x7c4f5a10, 0x39ecf5cf, 0x9ecfe7ab, 0x8cfe61b3, 0xd3a67ac6, 0xaf7ab27a,
-	0x9e875267, 0xc23a933f, 0x7ac3c9fc, 0x9eadf466, 0xfe7a1d3d, 0xf308e9ec,
-	0x73f91f27, 0x35fadf53, 0x9fcf53a9, 0x3f8c9d49, 0x4cd70f63, 0x3a72d075,
-	0xfa44ba16, 0xdc67b5c9, 0x45e6816e, 0x4e8bcb27, 0x44bf0117, 0xd20dfcd4,
-	0xf7e916ea, 0x39896df6, 0xbf48930f, 0xfa14a0a3, 0xb1bd4f15, 0x2123bf48,
-	0xe7e74e2f, 0x7493ba24, 0x01a2e4f9, 0x95fbf7ba, 0xf795d10c, 0xaeb57b9f,
-	0xa393dd3c, 0x4f9467cb, 0xa83fbdd2, 0xbf9740a6, 0xba0df562, 0xb7fd33f7,
-	0xeb59f2ea, 0x3fbdd76f, 0xae916eac, 0x0afacafc, 0x8155f95d, 0x35fcba95,
-	0x7baeff0d, 0x03e3547f, 0xc1d1f2ba, 0x63e57587, 0xf2eb8f42, 0xa93d0f63,
-	0xeb7c7f7b, 0x84f95d66, 0xcaebcfa3, 0xd0edb627, 0xb93dafe5, 0xd9e7e0c7,
-	0xf0d7ed9d, 0x27b808bc, 0x574fefcc, 0xc50bdfd0, 0x0657982b, 0xdf8fd1d8,
-	0x3d54bf1f, 0xbcabe54e, 0xa14d58b2, 0x129905f2, 0x0fe7ae3a, 0x8db2bf28,
-	0x9277bf3e, 0x7d274ae7, 0x19e2af7e, 0x9fe18ced, 0x24083c52, 0x04d5520d,
-	0x41fcb1a9, 0x20b1e199, 0xc7e1cbe3, 0x535ef7e8, 0x9a44f0d7, 0xd7e62fef,
-	0x129e5e03, 0x38d3884c, 0x7bc0d491, 0xf3826671, 0x73330782, 0xe047f69f,
-	0xaa20fd75, 0xbd774287, 0x1a4f65eb, 0x6b9b19f8, 0x1f83f6df, 0xed106eb2,
-	0x9e4200d7, 0xf90ede16, 0x07efd287, 0xd0f34d2d, 0xf50accfa, 0x57db23d3,
-	0xb123fb68, 0xff6806fd, 0x37da1ec5, 0xb5d3c90f, 0xae5c196f, 0xd0a2df6b,
-	0x1fd49df6, 0x6f23fda8, 0x12610a9f, 0x7f0b2f21, 0x83cdf6c4, 0x07fdb1cb,
-	0x895f3a15, 0xdc2e3f6c, 0x77f4107e, 0x3e3fb41f, 0x4c87ff46, 0x707ff7d2,
-	0x0affbe85, 0xb52bffeb, 0x71fb78c7, 0xe116ffd8, 0xe0ffeb18, 0x337fd60a,
-	0xbedc37ab, 0x43ffcc23, 0x7b37ffd0, 0x64d67fea, 0xa8afff7d, 0xccdff7d4,
-	0xf6a77fda, 0x8edf6f14, 0x9c2bbfed, 0xa2bffd62, 0xcc57db12, 0x47e0171e,
-	0x09ab88c9, 0x40c9f6d0, 0x03fa986a, 0x903b685c, 0xa0a2488e, 0x6151e426,
-	0x6f71d208, 0xe7dbc31c, 0x686f1471, 0x9cf8fc6f, 0xcb65a804, 0x8e2ef3a5,
-	0xf2db15f5, 0x584bb015, 0x4b2be74e, 0x4165a938, 0x364df111, 0x28c30398,
-	0xd1411dbd, 0x0db2f90f, 0xfec005d7, 0x4164cd79, 0x91277c09, 0xf4ff3c10,
-	0x4736a367, 0x2e98cbf6, 0xdbdb93a9, 0x3c2df422, 0x23202a8f, 0xd37d286a,
-	0xbbe30401, 0x79d31ff3, 0x8bf3a110, 0x833ce80f, 0x227e4850, 0xa23ef6b3,
-	0xb7c825f3, 0x9412f9d1, 0xdf8b5213, 0xa70eead1, 0x384bfa51, 0x4c4b1ffd,
-	0x43be3f5f, 0x7ea9f808, 0x31bdfe7e, 0xb05d4f38, 0xde9946da, 0x7f42c74d,
-	0xfb4f2eb2, 0x753907e5, 0x360736ed, 0x155fc80b, 0xaa8a55f8, 0xf5e2c849,
-	0xddd79419, 0xc54fbfef, 0x7f594e9e, 0xfdcb711b, 0xae77fbe9, 0x69390612,
-	0xe6ddb3bb, 0xb84e361c, 0xd7a84c33, 0x4794c324, 0x634dadc8, 0x29035a64,
-	0xb71fcb75, 0xb33bb445, 0x5d9f9f48, 0xc877cfa2, 0xe944d96e, 0xc81528ea,
-	0x9cef5a26, 0xad72fab9, 0x8929bb1d, 0x57b799c9, 0x9be8ca92, 0x3c0e6903,
-	0xe79ca276, 0x1ab7d93a, 0x32c5de3d, 0x3c82c29d, 0xc808fdfd, 0xef829fd5,
-	0xfd64eedd, 0x573bd236, 0x684bb8b6, 0x142ee73f, 0x236f8003, 0x67da7ffd,
-	0x69b29b73, 0x32a7feba, 0xc7f74531, 0x8f3cff48, 0x328d3fb1, 0xcbf3c38c,
-	0x6e19cf8d, 0x3ffcb9da, 0xf4d07c06, 0xd283e004, 0xa3e39c7f, 0x7c32aedb,
-	0x9b9ecd78, 0x4f5d0f01, 0xcae50488, 0xc71b72f1, 0x3d3a92cb, 0xc8f1082e,
-	0x7365c720, 0x23879c85, 0xe3873070, 0x1ebd5960, 0xbf127737, 0x2e431e9c,
-	0xfa6c36f3, 0xdd1a9a61, 0x6e390fbf, 0x1fb23fe6, 0x4fdd13f9, 0xb8bba726,
-	0xd1acee9c, 0xe5c6df97, 0xeb97277a, 0x0ec7fadc, 0x6e41f350, 0xe8320357,
-	0x4d3ef7bb, 0x793a6d9e, 0x8d3cb87a, 0xe5c5de74, 0x98f7d779, 0xb6f48d3c,
-	0xd5b67971, 0x90c9905f, 0xf48d7a68, 0xd51d582d, 0xb9e4051f, 0x9e5b1fd0,
-	0xf27e60de, 0x55e788f1, 0x8f92338d, 0x8ad9e847, 0x7e5d5286, 0xee9e6079,
-	0x0bf565fd, 0xea4be575, 0x17caeb96, 0x975bbfaf, 0x9effe85f, 0xab05fdee,
-	0x77e5756b, 0x2ba43cd6, 0x98fe5f9f, 0xf3cf3f2e, 0x39fdee84, 0xcae93773,
-	0xa73c9767, 0xb4599f2b, 0x752f975d, 0x6fbdd6ef, 0x2dd577da, 0x8e37cf80,
-	0x89fc0488, 0x30275ccf, 0x4b99f82e, 0xc73bc176, 0xbae22a7d, 0xd30237dd,
-	0xe2173e93, 0x0f2fb4fe, 0x8b608ed3, 0x3a09c61d, 0x89252e2e, 0x6e9bccd4,
-	0x103f5dae, 0xe38269c6, 0xacd316e9, 0x4264ff5a, 0x91526d7e, 0x0af5c5df,
-	0x44258d09, 0xd386c180, 0x944625d1, 0x5e52f5b7, 0x727f0d4f, 0x5b717974,
-	0xc7dee7ec, 0x8ce15e17, 0xd6e97711, 0x7e019253, 0xbbf7274f, 0x0295e58d,
-	0x4e7c8929, 0xd7a803c8, 0x5bb8f8e7, 0xaffd30a9, 0x405e91dc, 0x0d0f901c,
-	0x7b5cb9af, 0xfde4148d, 0x3a592701, 0x7f565e3d, 0x13bece8d, 0x03f6ca88,
-	0x3dd58dbc, 0xad70d15f, 0xfb33bbee, 0x1abba445, 0x1844c56c, 0x375e4b16,
-	0xb50e1d81, 0x0a399e0c, 0x61bf74e8, 0xd82a7182, 0x33c2fd0f, 0xe3e4a2be,
-	0x04afc812, 0xb9be93d3, 0x3cfbb698, 0x95f71e98, 0xafb1fa63, 0xdf36d306,
-	0xf23f4c6a, 0xc0fd31f9, 0x3fd31eb7, 0x3d30eaf9, 0xf4c7abea, 0xd3005f3d,
-	0x4c06bec3, 0x6235f1df, 0x620beada, 0x6373e1da, 0x6f5de9aa, 0xc7c93bb8,
-	0xbf80d3e1, 0x78eb3818, 0xfaed5560, 0x3b38ddc9, 0xd6afba6f, 0xcf9bb03f,
-	0x8e66f5c5, 0x1e1d5487, 0x336080be, 0xf297ace2, 0xb0e3997a, 0x9763efa7,
-	0x6bff377b, 0xc4de36f0, 0x8a6fccfc, 0x653c6eb7, 0xd594f018, 0x89fa9e1b,
-	0x34f1bbe3, 0x7e64e4de, 0x8fd3c70f, 0xe6311fa0, 0x84e00515, 0xd7f08bf4,
-	0xa71636dc, 0xd409ebe6, 0x6a716553, 0xfa1af6de, 0x75fa2b6e, 0x6e301181,
-	0xb7f11f9c, 0x3f8710e1, 0x274cd47f, 0xcff73d7d, 0xf99e9388, 0xcdf9c6ee,
-	0xbc1d00d2, 0x5b9746c6, 0xad5f18e3, 0xe8445226, 0xb0d0f6b8, 0x468b5c67,
-	0x49225e62, 0x55c07df0, 0x5ea31f1a, 0x7f032bea, 0x9aebe37b, 0xa1b3cff8,
-	0xff27f6be, 0x78e90b9e, 0xe397f313, 0xdbf4445a, 0x1769e849, 0x2e3c37f0,
-	0x10695d99, 0xa61aeedf, 0x086fd138, 0xf3fcf5d8, 0x376e7cd3, 0x3ca21eff,
-	0xb771c56a, 0x37f90d2e, 0xe9e1f3f4, 0x6f5fe07d, 0x7e37bdf6, 0xf80c0a2e,
-	0x37b3f097, 0x5d9bd8fb, 0xc5f56e24, 0xe77fed20, 0x0f3951be, 0x870760ab,
-	0x0f5a79b0, 0xa5d6d6fc, 0xff7cf48c, 0x33b8e26b, 0xeb71c355, 0xf9db4260,
-	0xf9cbeb88, 0x40132ba6, 0x9c1eb42e, 0xe4ed741f, 0x722f7e7e, 0xafa99b3d,
-	0x2fac6bcf, 0x68c22141, 0xa2bc6eda, 0x6a420490, 0x22a3cf44, 0x6d5c6fce,
-	0xec1b887e, 0xa8d6b9b3, 0xfd3c6f30, 0x1a854866, 0xf385f1f5, 0xc0769e87,
-	0x9a656c3c, 0x863c79c9, 0xaab4b51c, 0x8f69d331, 0xf504af9c, 0x4275f3f9,
-	0xe7ce2351, 0xa35984d4, 0x3a719c60, 0xbb050f8f, 0x56a9869f, 0xc534cacf,
-	0xddda9c79, 0x09590dd3, 0x6017fe6c, 0x225b64f6, 0x3ed39bda, 0xcfffbe0b,
-	0x7aa7a7a6, 0x69087a34, 0xc0589f22, 0xacb2d39e, 0x51efdf9e, 0x0a8ba41f,
-	0xb34937c4, 0x37cc39fc, 0xaffff4ad, 0x12bd4086, 0xbd7ab5e6, 0x3cdfa28d,
-	0xd36f9e1a, 0x53bf47b5, 0xf857b5b5, 0x93bd67ae, 0x7b86bb48, 0xf957bf2a,
-	0x068af0fa, 0xc7ef53ab, 0xdef2ea26, 0xe753ba60, 0xc03fc2d7, 0x2411af71,
-	0x87255fc0, 0x5f64a75f, 0x0cda780f, 0xbf9843c1, 0x2abdec08, 0x51e29b4b,
-	0x015a5d51, 0x34f28b9f, 0xfe73abfc, 0xa9d4ed4c, 0x7a0265d7, 0x54a4be46,
-	0x20a9f2e5, 0x4c44cde2, 0xbf98bf34, 0x4569a8bd, 0xa75b8c31, 0x50fe6c4c,
-	0x301c4a46, 0x75272e3f, 0x3d4f10b9, 0xa0454c4b, 0x3bc9679f, 0xfa11b18e,
-	0xb0544e78, 0xf5ebc5d2, 0xdf9d3c7e, 0xeacbf2eb, 0xe4a5f9f5, 0x075854d6,
-	0x2641ba5f, 0x86ec0101, 0xe898fcbe, 0x91977ac4, 0x6e30759a, 0xbbc79cff,
-	0x94893916, 0xfaabe941, 0x17732fcd, 0x892e3a52, 0xd6d5fc6c, 0x31279771,
-	0x05662bfa, 0xff7d3714, 0xb7b1a693, 0xbf440b51, 0x7583ac0f, 0x71297f6d,
-	0xf2d1256d, 0x1bf4bafb, 0x81fcd5e9, 0x4e64f5a8, 0xe0834a47, 0x63b0c40e,
-	0x3d30248a, 0x6aeef6e3, 0x838ba9c9, 0x223e42e4, 0xf18df20e, 0x78744294,
-	0x067a2cda, 0x7e19e34b, 0xd4820f00, 0x4dbe78a5, 0xf55169fd, 0xfbf52d5f,
-	0x903fd627, 0xabab9fd6, 0x4a9ff73f, 0xfa28d0ff, 0x5fd5620b, 0x76179bf5,
-	0xa93da9f9, 0x0e67e978, 0x53c9c742, 0x8baa5d52, 0xeb72b5ca, 0x9a6e1d0f,
-	0x0efc949e, 0x80a9ebc0, 0xde4b1458, 0x76f2c3ab, 0xbb8805db, 0xfd693fc1,
-	0x11ff9fa7, 0xdf3e23c6, 0x9e313b2a, 0x990e60d6, 0x37563ea9, 0xd9262f2d,
-	0xf2c63f98, 0x21139e0f, 0xafe3d41f, 0xa59fd9e2, 0x8a0afec2, 0x0a5f1e14,
-	0xbd5b3fa1, 0x1c42d3e5, 0xea17489f, 0x683bf191, 0xda1252ff, 0x424a85bf,
-	0x13a53974, 0xce5e04e3, 0x8fd36f17, 0xf80e89ce, 0xdfce1b57, 0x7397ef8d,
-	0x14b974ff, 0xa36ed29f, 0x26409eff, 0xf8d43d80, 0x3fcc0241, 0x2fdcf35d,
-	0x7a518fb2, 0xdd796cce, 0x49f04421, 0x8df3a3d3, 0x47b57f8b, 0x76ded9ed,
-	0xf48b3d50, 0x4af1b483, 0xbabf720d, 0x7295a599, 0xd52d71c8, 0xb24dcafb,
-	0x571f4fcb, 0x33f4f0be, 0xf31c424f, 0x30d7668f, 0x178aff5a, 0x8937bc0e,
-	0x976c57e6, 0x37598a53, 0xb76a42ec, 0xfff4bc5c, 0x72dd39d5, 0x80f978a8,
-	0xcf628ea2, 0x96ea4fef, 0xfbed8ac7, 0x9a2a3215, 0xf71b531f, 0x18f66d2b,
-	0x563c6972, 0x9ac27e08, 0x814bfee7, 0x7da9e2f8, 0x199fe902, 0x0e9b9f83,
-	0x7c001fa0, 0x39723942, 0x7866e585, 0x02e54bdf, 0x93935af6, 0x6e46fcb1,
-	0x753ea04f, 0xc5f9e224, 0xf2fdb43d, 0xd05d993f, 0xef17f2ff, 0x4e3f4071,
-	0xd70c3548, 0x2a61fcbf, 0xd972afd8, 0x94c4ea9f, 0xea7f2f3d, 0x65b788bb,
-	0x15377f6f, 0x9dc449e3, 0xc7b1c26e, 0x5bfd0e9f, 0xf63671b2, 0x20f1296f,
-	0x297fcaee, 0xfa680496, 0xb68a4499, 0x0e8bd0c7, 0x362717ae, 0xf68c4753,
-	0x1fcc04ef, 0x23bf5ec1, 0x422abee2, 0xffa026ee, 0xa17de5df, 0x3fe6021e,
-	0x1d3930b3, 0xaf5c4c90, 0x8919b7a8, 0xb60f2dd7, 0x0f4e7c82, 0x7587f772,
-	0xfc912f16, 0x57c21f9c, 0xedf15eb4, 0x7c99fde9, 0xf2e52a88, 0x3f38e8ef,
-	0xfbc39e15, 0x9adbb2ad, 0x7c8efbad, 0xfeddd995, 0xa53ede2a, 0xe7c60e3b,
-	0xfdb1a913, 0xa6b201d5, 0x8e9c74f7, 0x7e8457c0, 0xf2df7d33, 0x4d6fd310,
-	0x45a503df, 0x30f17e50, 0x0ef81fd3, 0x574a3fc6, 0xef963fa8, 0x3da0259f,
-	0x58e6f3a0, 0xe645bd7a, 0xd72fad7a, 0x96e94270, 0xbc088484, 0xc849fd40,
-	0x595f5c7f, 0x177e81ba, 0xd0bd2f61, 0x3eba239e, 0x71976f4d, 0xfa053ffd,
-	0xfeb74d7f, 0xef4c8d93, 0xfc9ff67b, 0x07236e2c, 0xf412799e, 0x5fa7ea95,
-	0x4b957d05, 0xdd7fdfa0, 0xeddef2d6, 0xdaff4f54, 0xdea9e9a8, 0xb4f51a7e,
-	0x1278c77c, 0x6aff4f4b, 0x7a989177, 0xd4c79f4a, 0xe21b7b53, 0xfd94fff8,
-	0x2897f8d4, 0xd9a7f9eb, 0x68f89ec3, 0x4a2f87b4, 0x68d3f22a, 0x61dfe90f,
-	0x3f8d1b92, 0xde1a770d, 0x755d7e2a, 0x309dd805, 0x85dc352e, 0x2ee1a971,
-	0xe3ab7e2a, 0xcffcb19f, 0x74a26b10, 0x4fd4b7cd, 0xa5847981, 0x2bbce08b,
-	0xeb88967f, 0x048b96a6, 0xc880bef5, 0x7df06fb8, 0xf078cd53, 0xfdfca743,
-	0x52f7b3b6, 0xbf13e77a, 0xebe5d6cc, 0xbfebf464, 0xc9abeafc, 0x73b73fb4,
-	0xeca7cefe, 0x63ca89be, 0xe28424ae, 0x24f39d28, 0x82484fe2, 0x3e40acf8,
-	0x7e63a08e, 0x7f0f3eb9, 0xebbb5253, 0xaffdede9, 0xa6f90f3b, 0xb63edbe9,
-	0xa42ef576, 0x2979b143, 0x20a54f12, 0xef3fca57, 0x04302138, 0x549b52ed,
-	0x7aaf3112, 0xb79ddb9c, 0x0f1ccda7, 0x9cfe4bfe, 0xe70c0951, 0xeb7e7183,
-	0xbcebf6e5, 0xbb004d5f, 0x0b39be7e, 0x0fe7afe7, 0xb58f8e2d, 0xe385b26f,
-	0x575f00ec, 0x750bb4e9, 0x277dc522, 0xc5ff42e9, 0xad92b76f, 0xbefdd631,
-	0xe4f89b2f, 0xfe8dcb83, 0x736e5489, 0xd1e70e39, 0x2272134f, 0xa6eb36e4,
-	0x5a239253, 0x71f7f00e, 0xdbeb3cc4, 0x0d7017f2, 0xb6b16dfc, 0x88c49615,
-	0xf384fdd7, 0x5f2bca6f, 0x69d5fee0, 0xf012f9cd, 0xd45d9a71, 0xd41e39c5,
-	0x192475f4, 0x794d7409, 0xe3a3f965, 0x87bd8e29, 0x57ec1744, 0x539f36f5,
-	0xbbe6313c, 0xfd427e46, 0x901e47e0, 0x23afc89d, 0xe012c972, 0x56d991eb,
-	0xef96eb02, 0x58aaae2a, 0xb3374e74, 0x523cc878, 0xe138d9f2, 0xe6fe3eff,
-	0x150f89cf, 0xb79c7e50, 0xd1c0fdb3, 0x7f7a63f8, 0x6a0429de, 0xc8a1c005,
-	0x004229f2, 0xc48564e2, 0x0164e8f3, 0x48fafdf5, 0x2c1f95fb, 0xd5f6017d,
-	0x4e0b3754, 0x96af2d13, 0xb1c014da, 0x025db837, 0x9546fcff, 0x20de31b8,
-	0x159a8cd5, 0x203ad711, 0x96afc84b, 0x277eddbf, 0x2cc2f7f0, 0xdcba0133,
-	0x6039cf23, 0x3cd0bfdc, 0xa7a0f516, 0x47c1fd7e, 0xa0934ca6, 0x30f8821e,
-	0xc530a1e2, 0x9ecfcba6, 0xa8ba064a, 0xdb98a6dc, 0x90c571ee, 0xe18532df,
-	0xcdf6cfac, 0x7d99fff2, 0x1bed4c9b, 0x691cb5c3, 0x512b46df, 0x2c7fadf6,
-	0x56b2b6fb, 0x58b80fed, 0x3fab37b9, 0x6be575c8, 0xb2c5fa4b, 0xd8faaf6f,
-	0xbe35fdfc, 0x2073bb0f, 0x23a36fb5, 0x6a40dbec, 0x6dc462df, 0xffcd15d3,
-	0x59bec5ec, 0xeff477fe, 0x316fb055, 0xd1523bfa, 0xe6a2b7db, 0x456fb45a,
-	0x7edd4503, 0xcf852ca8, 0x6fb47ae7, 0x1b367f0b, 0x16cbb2f3, 0x57c03f03,
-	0x71af6fb0, 0x80ed073b, 0x38a45b9d, 0xdabefdb1, 0xdabed2b9, 0x3e25ffb9,
-	0xe56e766b, 0x239e7620, 0xcecc871a, 0x7664ccad, 0x665ee56e, 0x630e56e7,
-	0xdf68ce76, 0x1beca20a, 0x047abefb, 0x8be71efd, 0x83b8bf99, 0x95cf1796,
-	0x7efa165d, 0x5f9daab1, 0x691f19a8, 0x122916ef, 0xdeca39f2, 0x39e1ceb9,
-	0xddecde90, 0x86ef605b, 0x0a1b1da2, 0xc7c4647a, 0xba6d430d, 0xbe4772fd,
-	0x4bf5ff68, 0x107f2fa0, 0xbefd9e71, 0xf68bcd89, 0x163ed17d, 0xa7376ef4,
-	0xc98551e7, 0x47e7c3b3, 0x24753a7b, 0x43aaf7d3, 0x544e3871, 0xbfac0937,
-	0x15010bf7, 0x5dbf81c6, 0x9df2f9c2, 0x797cd97b, 0x83f1998e, 0xcec89bfc,
-	0x2c16505d, 0xdcc3c08c, 0xd718154b, 0x0b112b9c, 0x0e0baff8, 0xfc0a70dd,
-	0xd69705d6, 0x00bbbfa3, 0x89bec39e, 0x32eb6ded, 0x2e77bb68, 0xa1de7017,
-	0x1798efed, 0x3f7a97b6, 0xec737e76, 0x38531a7d, 0x13ee533d, 0xa72fb002,
-	0x2f107db7, 0x239bfd72, 0xc8bf21b6, 0xf8cc625b, 0x985ef6a4, 0x97c62e4f,
-	0x6fcc55aa, 0xf289f30e, 0xf9a2154d, 0xbc5d2544, 0x2f9bb530, 0xfda4ee77,
-	0xbfb9e94d, 0xf7a2df1a, 0x3e71b8e1, 0xd7bf80b3, 0x3e341f13, 0xf39ff547,
-	0xb8a9fa9d, 0x8fc8c79f, 0x5ccecd46, 0x5e814643, 0x3cf26fbe, 0xf4701e3a,
-	0x942f949f, 0x0de6dbce, 0xd9e79dd3, 0x9372f9c5, 0x54b4d8e7, 0x6a48f815,
-	0x97b76700, 0x4a903f6f, 0x3b8b77fb, 0xe6420733, 0x78a6ffb3, 0x62d0fe20,
-	0xa83b42ed, 0xcccd30e1, 0x8e57f870, 0x9c0323c3, 0x09bc70d3, 0xafd44e0a,
-	0xf1cec190, 0xca5e647d, 0x6f5fd067, 0x144f8f90, 0x859fa09f, 0x720578da,
-	0xa9bcffa1, 0x5bc5c999, 0x6e5ca023, 0x81075d26, 0x8229d5ef, 0x2aab442b,
-	0x21ff6e0c, 0xd57ab7ec, 0x9e839f4a, 0xcdae0b97, 0xf4f61d8c, 0x963898d4,
-	0x3718e162, 0x9b8c4609, 0x24bde00b, 0xc668b7d8, 0x1efceff6, 0x3f4647b3,
-	0xf5b98a65, 0xe533d008, 0x09b264df, 0x7fe8061e, 0xfa303811, 0xf07a5131,
-	0xa4fdf735, 0x2afdfb72, 0xfc0ec1c8, 0x1fc052ee, 0xf8d886f2, 0x257b95a3,
-	0x4df21a75, 0x8e904393, 0x1c98e32f, 0xc8dfa960, 0x3cb45be7, 0x6fde1fe0,
-	0x7ef86416, 0x324f9506, 0xfa6a9a2d, 0x7786a0e2, 0x2fcd1ab3, 0x47a42788,
-	0x6fb00dd8, 0xd596eb91, 0x4f91b7c1, 0xeea2ac37, 0x27cd1a99, 0x07603e4d,
-	0x28afc72f, 0x8fee09fd, 0x9bea7fb9, 0x599a4fea, 0xacfb3faf, 0x868faf5d,
-	0x015eda38, 0x4e690aed, 0xf20fc5d4, 0xd65e6ccc, 0xce20f562, 0x5d935ebb,
-	0xfb68d59b, 0x0b971573, 0xcf2257cc, 0x0e854def, 0xd3b1bac1, 0xfad13e4a,
-	0x2ce1843d, 0xd5783c72, 0xf5f941ea, 0x5e04ff54, 0x98fe4f7f, 0xb40eff96,
-	0x5516fb07, 0xf1c67b7d, 0xf5278b48, 0x6669afd6, 0x69be3f66, 0xbe76b4bf,
-	0x9783baee, 0x4dfc62b4, 0x2cd87f5b, 0xc32e7e7a, 0xd048b8fc, 0xca5073ad,
-	0x9ff2fd71, 0xe558ff50, 0xfc43f532, 0xfcf94428, 0x31a7b6ea, 0xf9f67d5e,
-	0xfe833763, 0x48adf8ac, 0x3a9f542c, 0x1093c5b6, 0x80a207db, 0x24d1509f,
-	0x91167ae2, 0x2333b942, 0xd6420cfc, 0x14bc7e30, 0x62a7768f, 0x4c503987,
-	0xf5d8afbf, 0xddc43649, 0xf6601e3a, 0xc73cffcf, 0x1b2dbfa3, 0x242bfbd6,
-	0x946f8eb6, 0x9f1cbdcf, 0xe6db7667, 0x1a16fd82, 0x8ad779d8, 0x39b239c6,
-	0x6550ce22, 0x7b5c5996, 0x59f70db7, 0x70139ffb, 0x17d0329f, 0xdb52ce79,
-	0x39e679ff, 0x822b9766, 0xcdce0072, 0xef6c3456, 0xc5783880, 0xaffa3351,
-	0x0a7386de, 0x5f53a7f8, 0x23fd017a, 0xc5d4506f, 0x8fe2a341, 0x0cc8620d,
-	0x2aa6b3f1, 0x7f3403b4, 0xb18df30c, 0xc5bdf0e3, 0xb4bc56c9, 0xb29f9777,
-	0xcfcbc570, 0x6cdcf03a, 0xc60756eb, 0x1f2e1b21, 0x378a8fff, 0xd9743e36,
-	0x8e69e378, 0xf5995f8f, 0x21a435eb, 0x9490e319, 0x1892dcbe, 0xee308b71,
-	0x29ecf85f, 0xb33b0f58, 0x014fafe3, 0xb8ff95bd, 0xe07dd4f0, 0x3ab3ed8f,
-	0x3ef6bc61, 0x13d7047f, 0x7376efb4, 0xee78ef3d, 0xe9875c59, 0x05d9a3f8,
-	0x3dec75b5, 0x23d61831, 0x917fb63a, 0x55db710a, 0x3ce3a77b, 0xa9ced56d,
-	0x798c49fd, 0x6e029680, 0x07587d03, 0xa5abca32, 0xd03065a9, 0x1bca9679,
-	0xfc70b65c, 0xc58ab1b8, 0x371e55e3, 0xbd7b16de, 0xdc4e2a2d, 0xeb96f334,
-	0x926efc60, 0x43e92a5d, 0x9530f8bc, 0xc83ee8e3, 0x9a43db6f, 0xbf298fbd,
-	0x2a0ff0b3, 0xf20df7a7, 0xc969acfb, 0xb2849eaf, 0xe31ee4a6, 0xf03ea1c5,
-	0xdbcf5b4d, 0x6c7f7662, 0xf1d9bd06, 0x83cf8c6b, 0x835ce8dc, 0xd9f0bc74,
-	0x9cb38860, 0xc2eebb94, 0xcd7b33fd, 0x62aa2fb8, 0x3fa8fbef, 0xc6df3b1d,
-	0xd7c232f5, 0xf8483ad5, 0xf083ad8f, 0x4b779c39, 0x73338b3c, 0x5a1c43fe,
-	0x1e73e075, 0xd638666f, 0xc53dd0e2, 0x6c2dd39f, 0xceb6913f, 0xcfe5b558,
-	0xf5c4310a, 0xd3903c85, 0x8baecbb1, 0x02707c6a, 0xae44261f, 0xf38ec4a7,
-	0xb8ddd787, 0xe07e40bc, 0x4bd7857f, 0xc4207e68, 0xfbc203cf, 0xe83d8624,
-	0x61d6c4d8, 0xfbd8e43a, 0x95f5b50f, 0x4f418b14, 0x575b7d03, 0xaffe8de9,
-	0x26191fcb, 0xf9a3e39b, 0xd8cbe674, 0x45827c76, 0x61fb76f8, 0xf5a8852a,
-	0xcfac0b7f, 0x60531d37, 0x638da1fe, 0xf0cf7f5a, 0xe799f279, 0xb1ef3c45,
-	0xed05b1ae, 0x545ed1b8, 0x341f1613, 0xd3833bd2, 0xe3641d5b, 0xf11d99c4,
-	0xe7ad3b01, 0x11bb2bcc, 0x8edbd5cf, 0xdf5a7e29, 0x959786c1, 0x52fd88b6,
-	0x22044e30, 0xe2f33fe8, 0x7eb66cfe, 0xc6e5e6c4, 0x76f0e676, 0xdbb1cdbc,
-	0xa73b6ef1, 0xbf85676b, 0x77e76151, 0x69dedf2e, 0xea073dc9, 0x132add3b,
-	0xba7fbfd8, 0xc40a2c51, 0x45927f68, 0x4cf2e2d6, 0x8978e86f, 0xd9e31de7,
-	0x493146f9, 0x557aff41, 0x84d1de7c, 0x15154814, 0x6a6b14e2, 0x35d2fed9,
-	0x81a577df, 0xde24d7bc, 0x756deb86, 0x533afe06, 0xbf10f99c, 0x192b4e70,
-	0xda357007, 0x49b7449b, 0xf8aaff47, 0x1e70fea2, 0xc7f72d7f, 0xf3c2e488,
-	0xb0a3a297, 0x3a23fa08, 0x8c6b4e4d, 0x5ed905f5, 0x7c113c42, 0xf3fa9d91,
-	0xb1cbe492, 0xeda3d42a, 0xb4b4a9a3, 0xa742c41e, 0x4b0ab71b, 0xfcddec79,
-	0x77ec4e59, 0x4f3e36e7, 0x99d51370, 0xc183f6ca, 0x23b9d1b8, 0xc68c9b21,
-	0xe29b890f, 0x0b9fc6d1, 0x07eff6db, 0x41d6b47b, 0xcf5489dc, 0x31555728,
-	0x8e8dce0b, 0x805908b1, 0xfe6f73d3, 0x6d6bd696, 0xd0fe7116, 0x85f6d769,
-	0xcf4113ba, 0xdc11e46c, 0xfe5007ff, 0x4e9bb92a, 0x0240bee3, 0xdf76a4af,
-	0xb45d312b, 0xfce7bce3, 0x10071646, 0x98bfd5c9, 0x2470e2cc, 0xf1f3f400,
-	0xf3a70564, 0x7ef0a43c, 0x3ae78299, 0x72f6bd96, 0x3930886e, 0xb92bf244,
-	0xb4be7f48, 0x86c8eade, 0x77e27975, 0x9939c2b7, 0xbf5f5e32, 0x53b9fd12,
-	0xd07e7eaa, 0x4f5c25d3, 0xf0b4baff, 0x32bfd810, 0xebb452cf, 0xcfeae7fd,
-	0x59f71aa5, 0x2fb0bd21, 0x93ddea8c, 0xabbef442, 0xd6c7e6f2, 0x7a397cc1,
-	0x011915ff, 0x482ac9fb, 0xe7ce0b9c, 0x97d068ac, 0x79bb03ef, 0xd893b015,
-	0xebef172f, 0xc36dbf95, 0xdc79317f, 0x0aebf965, 0xe2dbfbc1, 0xecb2ae31,
-	0x9f68c5b5, 0xfe7a69cc, 0x7f3d555a, 0x7c8c236d, 0xde39f3d4, 0x369be7a5,
-	0xcf89ecff, 0xf3fa7909, 0x4b3e46be, 0x021bc784, 0xb5110e2c, 0x09b82dbf,
-	0xd9f236e9, 0x0b76d7c8, 0x7ce2f75f, 0x96257fa5, 0x81b26654, 0x842974ee,
-	0xa3d4617a, 0x80487b0c, 0x094a0f7f, 0xae57e2d4, 0x69efb478, 0x19423fbc,
-	0x7a06cefb, 0x2ebd0224, 0xd13823d4, 0x46de7607, 0x5bb6703e, 0x909f5841,
-	0x59e9aeaf, 0xfe94f79e, 0xfa22d8fe, 0xefc046d5, 0x762bd468, 0x0489376e,
-	0x9e8264d6, 0x6e309cba, 0x6a2cfa37, 0x9ff70499, 0x286cb510, 0xc4e27bdc,
-	0x1f7cc7f4, 0x8248e74a, 0x431b82fb, 0x3ec15317, 0xeba738fd, 0xde7bb066,
-	0xec04a425, 0x6c71cde0, 0xa798b29e, 0xdc2ab77f, 0xed7b4eae, 0x59bef87a,
-	0x785ce156, 0xcb56f367, 0x4507c830, 0x9bc47fbc, 0xb4157758, 0x332cd1df,
-	0x812ccaba, 0xd8bf1061, 0x1dbb632b, 0x7cf19365, 0x6b6fd865, 0x3a40fb66,
-	0x2c713f9b, 0x1de7b08e, 0x055e9fc1, 0x4c27acf1, 0x0c9ff7b1, 0xfdf89ab7,
-	0xfc70df35, 0x7fda8c6d, 0xf6cadc37, 0x0878fdc7, 0xe97547ed, 0x330e3e79,
-	0xcb96b87d, 0x6f4bf7f9, 0x6ceffec0, 0x47185416, 0x6e3bc50a, 0x39fb451c,
-	0xe3c488f1, 0x392e2c30, 0x9bbfbf8e, 0x1f80d2b8, 0x0223af13, 0x3fc4f3e8,
-	0x35b7dc12, 0xce2966ae, 0xa0eb7eab, 0x7586cf38, 0xb05b8a52, 0xe8ec6773,
-	0x956f8fbf, 0x9c4cb874, 0x798169e6, 0x04a384e6, 0xa384eded, 0x123cf2fa,
-	0x369db110, 0x4f6bf3fd, 0x5605f3ea, 0x49076f8e, 0xf86f7c05, 0x3aba4452,
-	0x01eb88bb, 0xd9676f5a, 0xa6efbc00, 0xda9c22f3, 0x6297e9a5, 0x7e71ac51,
-	0xf281e026, 0xe08509eb, 0x52c4f2f8, 0x5fefc63b, 0x05715a59, 0x7f9feb8c,
-	0xac4573cf, 0x7611e073, 0xafed8129, 0xe2502772, 0x0ad7ae29, 0xe975df8c,
-	0xebf63125, 0x70d6386b, 0x7d39e1ad, 0xd6279c69, 0xad0fc4be, 0x58290fcc,
-	0x6050423a, 0x204fb65e, 0x078ed7c0, 0x373d973c, 0x640f27e3, 0xe0de3d00,
-	0x2db3f405, 0x963b82cd, 0xeacab19f, 0x07bef360, 0x1fb0b5fc, 0x94aa5eef,
-	0xae7b1f60, 0xabce0377, 0x2ba0876e, 0x5ba9677c, 0x9770e788, 0x8866c858,
-	0xe9754b67, 0xee03c6b7, 0x4758cea7, 0xc4b27de9, 0x427e7284, 0xfefd2176,
-	0xbe30422a, 0x03b5e3c0, 0x229b266f, 0xc0ff23cf, 0x95b0ff9a, 0xd5b0fbd6,
-	0xf6497289, 0xdfa004b8, 0xe5ffdff5, 0xbceebd00, 0x0e394664, 0xed1ff3e0,
-	0x4f9cadbb, 0x6bdce3a3, 0x3ca4ff01, 0xe5c3f505, 0xc965a871, 0xe5012f70,
-	0x54758c7b, 0xf24d2fcd, 0xe946db50, 0xf09bb249, 0x76e22e7e, 0xdf6d4eab,
-	0x45efe119, 0x090903e8, 0x69a5f604, 0x166854f6, 0xff14f142, 0x10f62ce3,
-	0xca9233cc, 0x0929bf69, 0xf5616256, 0xc2674ab5, 0x9f71aae7, 0x2e65c53b,
-	0xb8226e1c, 0xd2360daf, 0x9d9afd42, 0xdaf3ecd5, 0x66f68244, 0x605263ed,
-	0xa367ad0d, 0xf88566d4, 0x2d5ba649, 0x4944ad80, 0xbde78a92, 0x7d339507,
-	0x32fd65b4, 0x50afec31, 0x0ff31f65, 0xf5ac4171, 0xfcc38fba, 0xfc00bcf2,
-	0xf5d43eca, 0x2e35b80a, 0x75cf6b2b, 0x79fe82c0, 0x3f706ed8, 0xbb8f90ac,
-	0xb1353f13, 0xeba102fd, 0xb69dbf71, 0x1bb4668e, 0x15de0f54, 0x953eaf41,
-	0x75cf9e08, 0xb572ffd3, 0xf611772d, 0xb9938f83, 0xf4169ac1, 0x2d91c4dd,
-	0x5f6bc780, 0xa238bbc7, 0x3784c8ec, 0xde806b3c, 0x8c3f6a6f, 0xa2131878,
-	0x33e5c8fa, 0x2a7b8552, 0x943ce19c, 0xfcf95ab7, 0x949bdb8e, 0xd1fd71d2,
-	0x3338e5af, 0x6bd357f2, 0xace7bea3, 0xb198b576, 0xc13200d6, 0xba110ed8,
-	0xc0b350e9, 0x8221bd1e, 0x4f99df7f, 0xbae942f1, 0xfc0ef417, 0x19818bf3,
-	0xcd0d9b80, 0x7e82b1df, 0xa3f1e37c, 0xb11d7e99, 0xa227fabf, 0xf6cac3a7,
-	0x0f803b87, 0xf22ffbd5, 0x728423f1, 0xea95cb0e, 0x443c6447, 0xe711bdc3,
-	0x81ac5e9a, 0xf0b2330b, 0xf9011c7c, 0x0a234288, 0x3a364cd6, 0x7f9aaf81,
-	0xcfec26bd, 0x9eb9e226, 0xded64e55, 0xcbf3591a, 0xefe8165d, 0xfe82f8aa,
-	0xf5175b97, 0x97f3a25e, 0x5e30f388, 0x67e70ba9, 0x090a4bde, 0x7e0b7f24,
-	0xb9eb6905, 0xc4a57e3a, 0x0757e0c5, 0xfff8d1e8, 0x6d93fb27, 0x6a83cfec,
-	0x25ae7f77, 0x51b6df9e, 0x4f7b90bb, 0x05c33a7d, 0x89169c39, 0xd95ebe0b,
-	0x51e77e93, 0x2dd706fd, 0x7a0d9f4a, 0xea99b13c, 0x8f5a29b1, 0xde09725d,
-	0x6bdae75b, 0xd4677b43, 0x5fbc8beb, 0x7be31b5e, 0x1199e88d, 0x5371f307,
-	0x5dc060d7, 0x8b924ab6, 0x41d9b129, 0xb6afad91, 0x91c6eb26, 0x8fddf1e8,
-	0x2ff35276, 0xf8d2bf35, 0xe4afd85e, 0xcf1686e3, 0xff148214, 0xc7f7dfb4,
-	0x5f01e679, 0xfcd938d7, 0x829a0e13, 0xab03fcbf, 0xcfa00ee7, 0x0710fb46,
-	0x42231aeb, 0x125e2c99, 0x4f5be9d2, 0xe83365fa, 0xc248634f, 0xc74fcc71,
-	0xcf4261b1, 0x4b8bf4f4, 0xab52f464, 0xc0ca7e02, 0xab1ac25c, 0x7bafb826,
-	0x47bb3660, 0xbb0e6066, 0xe3dff1f7, 0x7dcc7ad8, 0xd0dc6c71, 0x4b581fd2,
-	0xc97e81ee, 0x739bf112, 0x40dd39be, 0xef0fc42a, 0x0ddf738f, 0xb914b0fc,
-	0x4e191fb1, 0xde2812e2, 0x0146a432, 0x552437f6, 0x1b8b02aa, 0x40ee3612,
-	0x28cbeb4a, 0xdc61f356, 0x16b6a0ca, 0xcd1920e2, 0x6cf5cfb1, 0x5dbf9388,
-	0xea29abbc, 0x3886ca3c, 0x541f6fe6, 0x8b937f68, 0x709479d9, 0x0f9286dc,
-	0xbf88edfc, 0xf1db3b0d, 0xf50f5b19, 0x1b3e3227, 0x30205fe7, 0xf3c497e8,
-	0x6488543f, 0x91f9c24d, 0x99df04df, 0xb23f382c, 0xd8235711, 0x58e297cf,
-	0xe09d755c, 0x9ff90f5a, 0xb8165d48, 0xffc3476f, 0xeadf278f, 0x8e2be892,
-	0xc367ceeb, 0xc3ea959c, 0x8eaf20f3, 0xaf87e7c9, 0x0d741ec5, 0x8b737866,
-	0x9aeffdba, 0x4eb282dc, 0x8788566e, 0x78ebda44, 0x1df7e705, 0xe60b9c42,
-	0x05cb1d43, 0xe160a746, 0x7d2403e7, 0x43db869c, 0x27781c6d, 0xb7e9132e,
-	0xbc18ff11, 0xb2e2cc1f, 0xfd1a3d00, 0x86a473e1, 0x73c69e73, 0xe15969a0,
-	0xee3a4db8, 0xe0512d93, 0xbe722f8e, 0x97fe86d9, 0xdff4c1d7, 0x60fe8788,
-	0x6e732e3c, 0x15abf292, 0xae5fdbe4, 0xdb7b0449, 0x0ee3ceff, 0x0f91af90,
-	0xcc7f829d, 0xfadf5841, 0x9f731c83, 0xa5a69688, 0x7f05280d, 0x0d3d2d34,
-	0xbd79ed53, 0x07198a5d, 0xeef5cd3c, 0x9eb5e31b, 0xc3f30c58, 0xb39fd0d3,
-	0x73de779e, 0x6177baa3, 0x8e3ebc7c, 0xd15ebbf1, 0x8026a8f8, 0x5de7759e,
-	0x927eec09, 0x90ff7644, 0x8373c993, 0x492a52cf, 0xd1b9ef91, 0xdc47e91f,
-	0x1181e633, 0xad9320d8, 0xbf166b88, 0x5065ced1, 0x97e4c743, 0xb9fae8c8,
-	0xec294c6f, 0xcc6d919f, 0x30dc5d2e, 0x254bdb1d, 0x5387580f, 0x312d2ebe,
-	0x73ae20b9, 0x1c9fd176, 0x517c1470, 0xe02e6b46, 0x91e888fd, 0xd431e36d,
-	0x65b7f38d, 0x88409573, 0x9ea52a42, 0x9726241a, 0xb8eeb819, 0xff7314d0,
-	0xe6c6ddb3, 0x4e71cddf, 0x06d2d34c, 0x8d8d9697, 0x39440fcc, 0x7aa47869,
-	0xae365e98, 0xc5309cfb, 0x6fb40a47, 0x994ea7d4, 0x40dd6104, 0x9c2987b3,
-	0xd63d9aff, 0xf40521f4, 0x4b01d60c, 0xe4d47da8, 0x9abf8439, 0xfc4af18a,
-	0xfd5f9a13, 0x8e03e602, 0xded00aeb, 0x8f5ffd51, 0xd98232fa, 0xd3d82b6f,
-	0xe7653888, 0xc107f7de, 0xdf87dffa, 0xeb0f10bf, 0xba917f40, 0x9e7ec1e2,
-	0x78ddffbc, 0xe1f43738, 0x715e2cfd, 0x351e6197, 0xfaecc6c1, 0x6c92b6a3,
-	0xdf02d7e8, 0x227ae77f, 0xb3564970, 0x01e58d75, 0x5c9e70d1, 0x554f2f7f,
-	0x9ee1b263, 0x5bd63f1e, 0x32e7efc5, 0xcb92a1ca, 0x4db6f961, 0xed0a864a,
-	0x7eb6dc7b, 0xa08f6e70, 0x14d93cbd, 0x8d11f38f, 0xc6db459e, 0xfa773028,
-	0xaf99b34b, 0x6ccab77f, 0xc317705c, 0xf387967a, 0xc1e748cd, 0x6fac367d,
-	0xfed8cfc9, 0xadb48594, 0x7abed4d5, 0x0b79d99a, 0x7c963f63, 0xa7f616a8,
-	0x90f25bc2, 0x7862f380, 0x4e3a7eff, 0x883f5679, 0x7ec65eeb, 0x31cdef1a,
-	0xe6d55f9e, 0xfcb8cb53, 0xf50788cb, 0x6b5cea2f, 0x369f5b33, 0x1fceffc6,
-	0xff61b2ca, 0x91fe3c6d, 0x79c0264b, 0x86871de8, 0x3eee5c24, 0x1efc33e5,
-	0x1a57b826, 0x823e93d2, 0x654db669, 0xbf3464f7, 0xaae02f7d, 0xef1db83a,
-	0xf6bafb19, 0x94f9aaa6, 0x6b30f603, 0x91fa8776, 0xa43f01ab, 0x97f9d04c,
-	0x282e9bd5, 0xf8cbbe6c, 0x7e7f0770, 0x1b37f407, 0x3fab59f6, 0x7ce54c9a,
-	0x317ca547, 0xbf321ef2, 0xa6ee7f4d, 0xfad5fdaf, 0x2b5bf5a9, 0xd1fbe2af,
-	0xf869df8c, 0x2c78e6cf, 0x6eba52db, 0x9ad16500, 0xf30627bd, 0x4e7868f3,
-	0x1197c347, 0x4948cb3f, 0x8110ba61, 0xb147e693, 0xcb3c9a5f, 0xfef216ea,
-	0xbaf8d3fb, 0x8fc41a5e, 0x118dc37a, 0xdb721d1f, 0x2367d060, 0xb87a3a3e,
-	0x3627e45f, 0xa99427e6, 0x678842ee, 0x9d763751, 0x394fc233, 0xbc1dd529,
-	0x0b6cf40f, 0xf8c479c3, 0xd7b99ccb, 0x57cf1c65, 0xe1fdabc6, 0xdb943d3e,
-	0x6017d844, 0x5a7bc3f6, 0xb73eed3b, 0x7c04a86b, 0xb4f4c22f, 0x7435c4af,
-	0xd2f97768, 0xc0382e27, 0x411cee8f, 0x11d38e30, 0x77f7a7af, 0xf9e91136,
-	0xa543971d, 0x3f8ffad4, 0xd2da8d83, 0xda1dfb8a, 0xa071e4bf, 0xb145cd2f,
-	0xfe27f9fa, 0x86f7e11d, 0x4cf5c5dd, 0xe02c979b, 0x99abbb72, 0xda2f67ad,
-	0x30f28a58, 0x437ad7ee, 0xd0661670, 0x638d3caa, 0x51bf9014, 0xdf5c4b3e,
-	0x51607dc1, 0xf08f2272, 0xdc1e017d, 0x2f5653a7, 0x28c3dc62, 0x93bb7cbf,
-	0x6b57a39d, 0x42b71e70, 0x790ebd8a, 0xb5f4dda5, 0xc7ec63fa, 0xed0126c2,
-	0x65fe91a4, 0x0dd76a5b, 0xd67fd020, 0x847ee8bf, 0xe25da206, 0x55fad4fd,
-	0xff785c46, 0x50fad440, 0x7224f5db, 0xe6f2f53f, 0xbf2fb8c5, 0xb09ff69a,
-	0x85c61238, 0x7a35fa34, 0x1428fd8d, 0x8816c8cf, 0x5c16aee3, 0xefa39f60,
-	0xeeeb7327, 0xb0d85c3f, 0xafc8207f, 0x66fb625d, 0xce02fddb, 0x203f3b0b,
-	0xbd607d6c, 0x3d69eb80, 0xed99afca, 0x8e59ea07, 0xe7dc0a35, 0x8851b657,
-	0xf565c729, 0x11a1aef9, 0x60796a76, 0x8ea86b86, 0x1fdc46de, 0x54a1a2b2,
-	0x9d807cf7, 0xfdb893c7, 0x48df4dee, 0x38cc624d, 0x9a5fa693, 0x97fa69be,
-	0x3cd9576f, 0xcc1c0a47, 0xfebb04c8, 0xa84bce18, 0xcedabe5d, 0xd1e607d7,
-	0xb89faa57, 0x581f5ba0, 0xb3e4c792, 0xe7c62c44, 0xca57d93d, 0x1e7d9d07,
-	0x7fefd767, 0xd1fdb6f8, 0x85e9a1fa, 0x5ea33fd6, 0xc5aff918, 0x30728cd5,
-	0x82e81ff2, 0x7b1bc1f9, 0x0407816d, 0xa74677d0, 0xe915af7f, 0x702b48ec,
-	0x3fc839c1, 0xce9407c0, 0x31dbf4ea, 0x9496235f, 0xc75e71da, 0xfae34de7,
-	0xe1c83f16, 0xab4ed67e, 0x473b2c7b, 0xb80c9254, 0x36db5298, 0xf8a4e2d3,
-	0x2174647c, 0xe53a2bdc, 0x1099b6b1, 0xc8f25efa, 0x5fb84298, 0xb6d6ca7e,
-	0xea2e2d77, 0x2d8ed5d7, 0x57e5fb84, 0xf680dd80, 0x10db9607, 0x89e53d57,
-	0x9579f2e7, 0x5cce3fbd, 0xcbdd9f32, 0x292bcacc, 0x3c742d8f, 0xfc3c3cab,
-	0x959fa0f7, 0x1045c5ad, 0x8884a9b7, 0xaacf1d37, 0x2d908edc, 0x93e78d9b,
-	0x6cdb7be8, 0xf076559e, 0xc5ad2eeb, 0xb0f2adf1, 0x0e44fa84, 0x44a8b8b1,
-	0xdfa56afb, 0x7ea38dad, 0xdaefe52f, 0xe60b8b24, 0x1fb9f4af, 0x936bb5e6,
-	0xf11aaadc, 0x7c1f935c, 0x35ac7407, 0xfdfb75b1, 0x684f0daf, 0xbf78ccbb,
-	0xc32647df, 0x67c5a43c, 0x9e58d4c1, 0x7cf138af, 0xc589be44, 0xbfe58c35,
-	0x512cecd2, 0xd5170033, 0xaf161487, 0x4fe07fa6, 0x17a61156, 0xeb9d84d5,
-	0xf04c3aaa, 0xa1f54b1c, 0x02c73c42, 0xd63ffcfb, 0x735ff0e1, 0x571ba58e,
-	0x92054f8c, 0xc08a5930, 0x55bb34f5, 0x9bfb1797, 0x887f4046, 0x7382e718,
-	0xa9866218, 0xbfed0766, 0x294d0578, 0x4ba7243f, 0xea5afb84, 0xe1114ea6,
-	0x3235a9be, 0x62623fdf, 0xf6b5cce7, 0xb47f389a, 0x64bdb4f4, 0xecfdc807,
-	0x36b9ad5b, 0xf3817eb6, 0x6bbfad61, 0x60113704, 0xe08075de, 0x149c80f9,
-	0xb3fc02d2, 0xe01e7711, 0x127b3ded, 0x375b37e7, 0x90197fa6, 0x97a6ccba,
-	0x57f78a55, 0xfa84591f, 0xdd304ae0, 0x6ff34993, 0x7cb197d9, 0x2642e986,
-	0xf6dbf085, 0xc6bf9672, 0xcd086174, 0xce5f6bbf, 0x49c0b0f2, 0xf623b607,
-	0x48ff428a, 0x7de38768, 0xc01afb9b, 0xf16264b7, 0x0515e917, 0x7db453d7,
-	0x44e96b21, 0x1ef8f00b, 0xa7884dd8, 0xdafc16d4, 0x02eaf106, 0x3dfb0ab7,
-	0x837bf336, 0xf1aa69be, 0x7099b455, 0xf02903fe, 0x4fce43ff, 0xc9a42e4d,
-	0x8bec0d7d, 0x6bee8d25, 0xb4ed1d60, 0xf606d3dd, 0xad1bec66, 0x377ec053,
-	0x5ca7f3bd, 0x0afc9fbc, 0x37d8cf56, 0xf6909ce8, 0x066fece7, 0x8f5c8a6d,
-	0xffcf6d3e, 0x62a3be14, 0x5054ff40, 0xaa0ee49d, 0x44dc6b87, 0xbe60b255,
-	0x362f9fac, 0xb69f6611, 0x82ce4ad9, 0x10c0c95c, 0xf6455b8e, 0x6bc84e92,
-	0x26b49cf6, 0x9b5f69f5, 0x845abd92, 0x23293971, 0xd8117478, 0x7bb1dfff,
-	0x1bb7043d, 0x14be73f7, 0xed8cd7be, 0xfec1b10f, 0x177fd010, 0xf2a7f349,
-	0x2f8b17f8, 0x88dc9493, 0x07ef3079, 0xec1a7efd, 0x63609f37, 0xbf6807fb,
-	0x63abb044, 0x58e98a88, 0x81656788, 0xdf983d28, 0xde8f1a43, 0xdc7feb47,
-	0x9649e2ca, 0x0f8ba206, 0x38b3c766, 0x8b074ccb, 0x8dc9c60f, 0x10ff82b7,
-	0xc1388e77, 0xa5fce87f, 0x22fee122, 0xae2379c9, 0x11341d8f, 0x3959f7a0,
-	0x99f584e0, 0x7524abae, 0xafaee933, 0xab5bcb93, 0xbd4571f7, 0x7372e20a,
-	0x7d3fcc1d, 0x7ee09f36, 0x4a53aee8, 0x934dd600, 0x91352c32, 0xf92b9ff1,
-	0x0b390f77, 0xfe21e332, 0x408e37bc, 0xc5f613fb, 0xbf0e4099, 0x056396de,
-	0x3c04bc3c, 0x32487ca2, 0xfa86ef3b, 0x7a502e92, 0xdb39f133, 0x63a92f27,
-	0x277f2812, 0xe15760dd, 0xad67a9be, 0x7ee0378d, 0x784c17d0, 0x8a4beebf,
-	0x2ff214ab, 0x609d579d, 0x6ccd9f7f, 0xbcfec38c, 0xbcfec260, 0xf575d714,
-	0xc3f74a4a, 0x4a7c5823, 0xec0911b2, 0x502a64b2, 0x73cfa6ef, 0x493cd9e3,
-	0xe3cbd3b3, 0x2e3cfe99, 0x200f3c10, 0x7f51f299, 0x9d3afdb4, 0xebf7045d,
-	0x2ad59bf4, 0x4ae38e02, 0x4851b8b5, 0xe4cf7884, 0xdb7e8212, 0xe78cbb64,
-	0x307f6072, 0xc29b1b9c, 0x0f94efed, 0x813d712a, 0xdc30e04a, 0xe762d97f,
-	0x75f168f7, 0x4e39ebc5, 0x226d23ae, 0x5dd791f8, 0x07882e22, 0x8a497f5d,
-	0xe74e47e9, 0x10233ef5, 0x97be8129, 0x0095517f, 0xef44f977, 0x2faf4de7,
-	0xe0e3053c, 0x39e18b54, 0x8f4889f8, 0x4ff7cf1b, 0x4fee1a77, 0xd6f3e78e,
-	0xe47064c1, 0x1d6d313e, 0xf238ba68, 0x8b53f409, 0x65f01714, 0x3efdddbb,
-	0x5bfa7bac, 0x38b97265, 0xb63e33e2, 0xa5c46f9f, 0xa1ff5c38, 0x2e03b4f8,
-	0xf3afaeae, 0xafbf695b, 0x07eaca1e, 0xb95d821c, 0xc92997f2, 0xf1cde760,
-	0xa968decc, 0x97c03b86, 0xcbe18133, 0x3f5bba39, 0xe267c557, 0x01be9a7b,
-	0x3d9ea0ee, 0xac7e6072, 0xd78a6575, 0xedd78055, 0xb3f38276, 0xe65ba51f,
-	0xed699e82, 0xf86789ec, 0x6aeba637, 0x7587ee57, 0x6c67ff1d, 0xe03698bc,
-	0xde391292, 0x3864e87f, 0x3375aaf3, 0xf3fda66f, 0xbf5c65da, 0x8be7e549,
-	0x1e92f122, 0x770d1781, 0xef16761d, 0x7533f0d1, 0x3c22bbf7, 0x2119fa9f,
-	0x9e124cce, 0x99f86887, 0x9c3867e2, 0x138d8872, 0xddc7e1bd, 0xe6069ce5,
-	0x87370a31, 0x280a6e18, 0xb7f7f03e, 0x118fc07a, 0x8af54f37, 0x3cf12f9b,
-	0x53bdaafc, 0x186ebb2f, 0x7df7e9f4, 0xb689d31a, 0x8f82fbd8, 0x56ef7e72,
-	0x06cc6eea, 0x8993717b, 0x48937f9d, 0xe714adc6, 0x7bb4e3bb, 0x20b26be5,
-	0xf6625dbf, 0x19b37b67, 0xbb76cfed, 0xd77183c7, 0xcb9e0b34, 0x0da79226,
-	0x06bbf5f6, 0xdfc8d458, 0xc72ef8d1, 0x9a1ca361, 0xeffc0278, 0xf3fc98d7,
-	0x1b81ca6e, 0x197a48ec, 0x93b8c393, 0xe21126ca, 0xfdfc8e42, 0xe04faf80,
-	0xc3c02d4e, 0x25ef0571, 0xa0ae3eaa, 0xbecdfc5d, 0xbe210bb7, 0x9e1feda9,
-	0xc2ede7b0, 0x3ef09182, 0xdc6bd9c3, 0x3c796aae, 0xd276014a, 0xc4fd2f70,
-	0xfd2679f0, 0x8025f2bd, 0x72eeec9f, 0x73eb7de3, 0x1d1784e0, 0x736d6e77,
-	0x60b3074d, 0x4e7d6fbc, 0x9b1f9d88, 0x1d3dd47d, 0x7dd4654c, 0xb70f1ceb,
-	0x715dd691, 0xdffdf462, 0x163e7c74, 0xd7fbf10f, 0xc1c40a43, 0x6b9a951b,
-	0x26a27cd8, 0xa68fec0b, 0xf947f877, 0x08e1f8d6, 0xc3ff7ddd, 0x88f3f8f8,
-	0x38f7624b, 0x4eb829b5, 0xdf6128f8, 0xeb71f235, 0x39f7ae2b, 0x0f9c5eab,
-	0xb96c70f6, 0x576dd71b, 0xfe7c4539, 0x64b21213, 0x125cbc81, 0xca3477ae,
-	0x4213d4ea, 0x2a447bf7, 0xe5a76119, 0x8dc5fa7b, 0x70eff685, 0xf00e4c78,
-	0x43aea42b, 0x4984ddf0, 0x6ec16339, 0x4dacc7db, 0xa34c7186, 0xb455d29b,
-	0x874dded5, 0xc7275746, 0x858e1dc9, 0xf678c726, 0xe0a1d81d, 0x7c0b76b1,
-	0x71a0e1af, 0xff2639ef, 0xfc803c08, 0x2c20f1bb, 0x07c6bc80, 0xfcb54f1b,
-	0xa10f1f3f, 0x1e9f2081, 0x087100f1, 0x43c2b7c7, 0xc355f016, 0xaed7f503,
-	0xfe68fe02, 0xf6c2a35a, 0x0d796a1d, 0x7cf64507, 0x10a5cf7c, 0xf6443fdc,
-	0x6d39d959, 0x57ae224f, 0x6d64ecbc, 0x3ed87e74, 0x6498ba98, 0xebf983b2,
-	0x8c89efda, 0x57e80909, 0xe106a18e, 0x06e3f40e, 0x71743da2, 0x4176917e,
-	0x71377b80, 0xf806796f, 0xd064a197, 0xe2e6318b, 0x877fe010, 0xf8064a6d,
-	0xc9b63987, 0x5daf8059, 0x0ebd5623, 0x01aed643, 0x516f2fe5, 0xcd27fdbb,
-	0x6af0b5ee, 0x746ff6b5, 0xbd74fb30, 0x020f9d9b, 0x87491dbb, 0x2c41ff66,
-	0x9a108740, 0x86cafa63, 0x0db9baf6, 0x41d039ec, 0x205fbaf9, 0xe41fe04d,
-	0x5329dc9b, 0x17ebcfc1, 0xcece8092, 0x860c5fbd, 0xf3716538, 0xde8147ab,
-	0xd43d6d62, 0x350f5fa5, 0xbf9ad1fa, 0x342bcda3, 0xcf9b487f, 0xe504df82,
-	0xd3b9fcd9, 0x26add6cc, 0x6e782c87, 0xeaf3f1f9, 0xbfae6e55, 0x3147ed12,
-	0xa42dc7ef, 0xeed2e915, 0xf399b91d, 0x9d10f8a3, 0x39436687, 0x3e513721,
-	0x1defc4dc, 0xbfa5c9b9, 0xbc96e157, 0x688ef7d8, 0xbef6f4f5, 0xd6b87c71,
-	0x6df46eb0, 0x763e43d3, 0xfa7fc8cf, 0xd2773cd8, 0xc12fd110, 0xce979a80,
-	0x327069ee, 0x62521c3e, 0xb9fb578f, 0xb5324efe, 0xe5b9c365, 0x8efe7bfd,
-	0x7b2be3e3, 0xf81efefe, 0x494f1389, 0x4eb5f604, 0x012e353a, 0xd2f3e7d7,
-	0xab593d70, 0x9369fbd7, 0x88e7b08d, 0x5777ed1f, 0xdc7a520e, 0xc167d00a,
-	0x1e67b7f4, 0x77d429ff, 0x2244b8f1, 0x2a144dcf, 0xc710a19e, 0xbfbfe42d,
-	0xfe605073, 0x907e5692, 0xf3c5eeff, 0x21b0b71c, 0xc48fbb42, 0x9be7211c,
-	0x9a193df8, 0x593a6f5c, 0x8eca4a74, 0xfdfc0f96, 0x5a0be233, 0xf399a15c,
-	0x11fcb48f, 0xa77cb7cf, 0xfc096ee9, 0x89a4eff3, 0xeed11dc4, 0xe0ce950c,
-	0x2f1ce223, 0x4a7e0c3b, 0xbd3f73cb, 0xde2b8e99, 0x4adc4437, 0xfede6de8,
-	0x5be4367a, 0x8ff798c5, 0x9dfbf918, 0xfef1bbe6, 0x2a092191, 0xfb5bd3d2,
-	0x38a6ae93, 0x27720d19, 0x65cbcfcc, 0xe51877f7, 0xff9ecafb, 0xd91b6e48,
-	0x927bbf33, 0xbf0e51bf, 0xeb80533d, 0xc3c9bd4e, 0xb47ddb88, 0xbfda7e9f,
-	0x9fa7ed10, 0xf8af63fa, 0xbdff989c, 0x1af30d2f, 0x9f7bbd5e, 0x4e7f064e,
-	0x64f4e9c3, 0xbb899b86, 0xec4c9a7f, 0xf232f2dd, 0xf30773ed, 0xd710e66b,
-	0x3fe99bec, 0x78ae0a77, 0xd27e17b4, 0x4ab3fb0a, 0x0e738d38, 0x41ffa217,
-	0xe31079f8, 0x1c473638, 0x7bdee789, 0xa19bddfd, 0x5b9832f9, 0xbf0578e3,
-	0x36b802c7, 0x6f45538e, 0xb2e049d4, 0x98ab4a15, 0xba7ee31d, 0xce519746,
-	0xf6094847, 0x8d3a27a3, 0xabd23038, 0xefdae7f9, 0x4c7e50c0, 0xddf5a24f,
-	0xff63e6aa, 0xce61c6a2, 0xdfc69e97, 0x9c95fa9e, 0x1cdee3c0, 0x4e4e17ff,
-	0xdbd80b7b, 0xe519be93, 0xecd72c66, 0x90342147, 0xfc1fa983, 0xa9092191,
-	0x97850fa8, 0xe3a6e214, 0x3fa8190c, 0xaf8a4eff, 0xe3ddbc40, 0xc27acf64,
-	0x1325f55b, 0xe37724f1, 0x663e0e4e, 0x96eddc03, 0x1f106cea, 0xba5ecebd,
-	0xda6f5406, 0xf0b305a7, 0x1336879e, 0xf4d99081, 0x102d73e6, 0x251ef047,
-	0xa0a03e78, 0xc054ff79, 0x56a5efe9, 0x5e75479c, 0x08b1e424, 0xbcd8333f,
-	0x587e06c6, 0x6f9d8530, 0x7448983b, 0x27f790fb, 0x8f06bc30, 0x1dd9bf9f,
-	0x2f12fca3, 0x29dc499f, 0xc72e38d9, 0x70a3fc63, 0x3ffb09bd, 0x481d704d,
-	0x9e65bf01, 0xce85f380, 0xa40e13bd, 0xee3b7a50, 0x333b444c, 0xdde0f83d,
-	0xc6882a4e, 0xcf8b1eff, 0x780a16bb, 0xeaa140cf, 0x59617cc2, 0x98dfee26,
-	0x99e48ff0, 0x433e50c5, 0x74cdf9c6, 0x788252b1, 0x2134d9d4, 0x7b8be607,
-	0xf85ab684, 0x297f5c1d, 0xfd38876b, 0x7cff30c9, 0x0c7938a7, 0xaa9c76fe,
-	0xefe187e5, 0x3cc31203, 0x0bced56d, 0x7cb4cdfb, 0xf7016cd5, 0x66774eef,
-	0x7e047f10, 0x7953d70a, 0x6cb8a58e, 0xb8005fee, 0x3fa4599e, 0xc4bb3837,
-	0xeb910246, 0xef138216, 0xf7c83b21, 0xfc097769, 0xe7ae7c5e, 0xcfbc7037,
-	0xfbac9b99, 0x3f3094ae, 0x6453bbd3, 0xb3e471f7, 0xf4d6a1df, 0x87ae46eb,
-	0xf1f9f037, 0x8e864f3c, 0xd288628e, 0x5b3f4088, 0x62e5be47, 0xa5cf0e1b,
-	0xe78707e2, 0x1c6ef6d3, 0x8ad79861, 0x17116b95, 0x6f1d6c69, 0x1382ec36,
-	0xdfea6ec1, 0x9f4f25bb, 0x97c7a18f, 0x3d9a13b5, 0xc457bd98, 0xf9d9c375,
-	0x8902cf94, 0xaebfd3f2, 0x726098bd, 0xd078801d, 0x78dc97ad, 0xbd944e8f,
-	0x1be8a0f8, 0x50df8bd9, 0x7aa3cc1d, 0x1f0264fd, 0x41910737, 0x8ba63760,
-	0x380a7edb, 0xa6e3a4ea, 0xb48e0639, 0xef9b4771, 0x063d5217, 0x6c3390dc,
-	0xa5fa659d, 0xa4efdc34, 0x76c3f7cd, 0xae25fa84, 0x6fd2fe18, 0xf774b212,
-	0x4aed847a, 0xe7225f84, 0x64bf7b7e, 0x9547f53a, 0x206fa01c, 0x7b458ff1,
-	0x42c97186, 0xf10518d8, 0x1873b4c1, 0x744af1e7, 0xf3e38afe, 0xb02f88d3,
-	0xb752427f, 0x15fd187e, 0xd63cce2d, 0x7a53f9a9, 0x8de3849c, 0xa57dd8b3,
-	0x810a4e1a, 0xb3ffa09f, 0xf4eb8c44, 0xfdad1b86, 0xa212f0de, 0x564c08f6,
-	0xfae1788f, 0xf2f175f7, 0x197c6d17, 0x05f6864a, 0x343e1a27, 0x9bc718bc,
-	0x83c434ff, 0xba6f1a7a, 0x0e6f197a, 0xaed1908c, 0x7cd7e6f7, 0xeaf3e4ea,
-	0x37a62704, 0x7f1b355c, 0xd82c6897, 0xf937f011, 0x6b8e15b8, 0x1c9c33d5,
-	0xc1245b68, 0xec1791fa, 0x1cb76647, 0xfff078b4, 0x81c4c600, 0x008000d5,
-	0x00000000, 0x00088b1f, 0x00000000, 0x7cbdff00, 0xd5547c0b, 0x67b7efb9,
-	0x332479ef, 0x49926649, 0x1d843c32, 0x09212108, 0x11bc210e, 0x11084937,
-	0x88a80ca2, 0x1f01d68f, 0x4d092060, 0x6f53d5ad, 0x52812133, 0xbd583d6c,
-	0xf4f47bd6, 0x41ed5837, 0x0108750d, 0x26702783, 0xd0f098a0, 0x7ac0f820,
-	0x452968da, 0x5a18921b, 0xf5cf6a0f, 0xf6b7df7c, 0x8326664e, 0x73def7a5,
-	0xd62e9f87, 0xf5af6b5e, 0x5ff9efad, 0x4a9b5adf, 0x500a9fc0, 0x982015b3,
-	0xe1f95006, 0x06484a86, 0x01203be8, 0x96d40314, 0xfe1b41c9, 0xb1fdb4b5,
-	0x0cdd45c7, 0x51df8956, 0xf5c02661, 0x950b7e20, 0x06e6c50e, 0xbc95e658,
-	0xd6801672, 0xe1bfde2e, 0x62a82592, 0xf9af7afd, 0xe89b1ee3, 0x5fff35fb,
-	0xb800c803, 0x197f7f51, 0x2ffb0ffd, 0x1860a4d3, 0x3b365d5f, 0x978dffba,
-	0xa6913fca, 0x62d72c02, 0x3e4fc39e, 0x22f2a793, 0xac24becc, 0x8fb74457,
-	0xcfb92673, 0xe32ff1d9, 0x32d7fc61, 0x65f3c5c0, 0xaff7516f, 0xc8ed77e9,
-	0x523d48f2, 0xace80166, 0xdb1971b7, 0x7f016e5e, 0x4d2581c8, 0x0065c450,
-	0x9d0a0152, 0x581998b8, 0x0d0164bf, 0x136308f9, 0x3ab9f7e0, 0xdf86131d,
-	0x07e3883f, 0x8e30dc70, 0x3801c81f, 0xfae4ef54, 0xae1ef56b, 0x2f82935f,
-	0x877fe3a4, 0xb8a8b0bf, 0xdfedc59e, 0xdf38fc51, 0x8f0a4be2, 0x93d69b3b,
-	0x71830b4f, 0xf73f9eb4, 0x0de3fd16, 0xb6bfdc30, 0xbf8b33fd, 0xf9ebf2f0,
-	0xa7e7f35b, 0xcd3f3ca8, 0xcf0c15ab, 0x180144bb, 0x9a5ceb83, 0x635fcd1b,
-	0xc6f9589e, 0xfeb96fca, 0x56fcac7e, 0x90c7acc4, 0x32a2f40f, 0xffc38a8d,
-	0xa6d0264b, 0x437e5e5f, 0xb3f8b1f2, 0xdb2305bd, 0x72c97e01, 0x974f1e1a,
-	0xbe2b7417, 0x19974142, 0xb752baf5, 0x40efd40b, 0xb2b9ca0a, 0x4889c213,
-	0x2be7f5d8, 0xf4a8513e, 0x9471f04a, 0x6c7c033e, 0x1e1e5bc8, 0xe425d17f,
-	0xbcf0da6b, 0x7764148b, 0x0b1f3d11, 0xa8eb3881, 0xea1471a1, 0x6c39601f,
-	0x155a61d9, 0x635c75c2, 0x547d3b81, 0xe0328a26, 0x937db894, 0xf6e3c4d3,
-	0x8266c5ff, 0x3e5e01ab, 0x48025998, 0x3cead79f, 0x42011306, 0xbff7e066,
-	0xdfb9524e, 0x240824e6, 0x74a0fce0, 0x945ec8db, 0xb45c8012, 0x25b4653b,
-	0x364388d8, 0xd91f612b, 0x8157bf61, 0x2fdbb406, 0x050ef78d, 0xc914076e,
-	0x4c738fe6, 0x7ef4598d, 0xf61e7bb8, 0xa8a4559b, 0xcb8bb0db, 0xda877eaa,
-	0x9d580efb, 0xfeff5ef4, 0x699877ef, 0x1780bf9c, 0x0ed78429, 0xe7da8158,
-	0xf241cc3b, 0xe3e48b1f, 0xfdeb09b2, 0xec560003, 0xb8557f3f, 0xd76e5014,
-	0x13a37740, 0xc724b9cb, 0x8d7bf238, 0xfece9bd6, 0xe50a31c3, 0xd39740b4,
-	0x956fdd02, 0x8fd9901e, 0x41c92694, 0x53f61ac8, 0x5a32ead7, 0x3a256c80,
-	0x7ae1b416, 0x4bdafdb1, 0xb4bf5c4a, 0xe1771f48, 0x9321419f, 0x7ad1085c,
-	0xf84da8bb, 0x14d012a3, 0x6d4b29c0, 0x97e4ed31, 0xce459e90, 0xc973e7e8,
-	0xef5ea277, 0xf84bf18e, 0xf7bcd133, 0x8bbcc53b, 0xf726bfe4, 0xb65ffae0,
-	0x43cdef68, 0x9a4e077a, 0x0e7c59e1, 0x6732b1e7, 0xd0da5f24, 0x973983ae,
-	0x07fd8bb7, 0xe9153513, 0xc7f49979, 0x9ad1f541, 0xfdf2f53a, 0x940cf6a7,
-	0xb9787760, 0x13028579, 0x7b4f1d58, 0x3df98632, 0xff3aaf82, 0x22d9f963,
-	0xf91d9341, 0x5bddb0bc, 0x0465ae46, 0x8f913b1f, 0x80c95ef8, 0x295cf3c6,
-	0x78fb0d1f, 0x46a25cf9, 0xb9f2fefa, 0xffcd1ad1, 0xfa6be92a, 0x3feffeb0,
-	0xfe48983b, 0x2aa8f913, 0x2e0317a8, 0xd659f79b, 0xa1f7a15f, 0x6dc13951,
-	0xf5d16f58, 0x81c4e5fc, 0xefc4f9a3, 0x67de4deb, 0xe3651a69, 0xe48515c4,
-	0x9c96b737, 0x0d2477c5, 0x7ed107a4, 0x7709d524, 0xfb401960, 0xa40b7d21,
-	0x1993eb02, 0x36f34042, 0x9534f06a, 0x29abe60b, 0x1c41efc4, 0xe341dbb3,
-	0xe7a429a9, 0x338bd7f0, 0xf923857d, 0x0a8f52de, 0xd6b4f385, 0x1b2534db,
-	0x93bd5f60, 0x1ef56deb, 0x57ad5f2e, 0x2c74dcb9, 0x8e20c1f9, 0x3459ab53,
-	0x7df86d25, 0x8fb0aa57, 0x8867e805, 0x052005ae, 0x0b73a803, 0x5ef5d61e,
-	0x249b8291, 0x27ae1392, 0x97289f82, 0x08dc9ec1, 0x4d2936fe, 0x35b26693,
-	0xf28bbcb0, 0x063efc4d, 0x59f3e0ff, 0xdca3fb23, 0x4baaeaa3, 0xbae67e62,
-	0x961724b4, 0x52f8743f, 0x6e916ca8, 0xb8017c39, 0x5bf512ee, 0xfe380be5,
-	0x7842f0f4, 0x74c3e310, 0x15f10c14, 0xfd13b77f, 0x402c3a33, 0xca80c1f2,
-	0xd3a45976, 0x492e7da3, 0x323e70e7, 0xe0c7af9d, 0x30cad67b, 0xe83ed1e9,
-	0x17be2349, 0xb4767cdb, 0xc843a428, 0xf66e9355, 0x9cde3848, 0x26578b74,
-	0xa6fa26d2, 0x75fe446f, 0xd884e3a4, 0x6323a3bf, 0xa6f68aac, 0x4fbc6f29,
-	0x1cd9ad76, 0xcc2b8161, 0x71113dbd, 0x719e133c, 0x9f22bc52, 0xbdf235f6,
-	0x01c977f3, 0x73886bf6, 0x9e758fc8, 0x7186f64a, 0xd92e6b9e, 0x7fd256bc,
-	0xf5ed117a, 0x54f26260, 0x5dd0cff2, 0xd6b8ebc6, 0x6f91d626, 0xd8bb17f6,
-	0x9f0f859f, 0x6dfef7c0, 0xe9fc8010, 0xca1fdd35, 0x9a94f480, 0x907b32f2,
-	0xe4d2c3ce, 0xfc9f2a14, 0x9701725d, 0x897b92a7, 0x764d073f, 0xa77de695,
-	0x46ce2d5e, 0x72ded17d, 0xd61d0098, 0x0a1cb782, 0xa1ea2795, 0xe5f51b38,
-	0x971b7aad, 0x5c9deb27, 0x70f7aa9e, 0x49db1879, 0x76c75e9f, 0xb037b7d2,
-	0xd85dea9d, 0x1c31e54e, 0xdba2ca97, 0x96bc7893, 0xb42c92db, 0xd0c9838e,
-	0xfa4fcc6c, 0xb70c4e14, 0x3fe01782, 0xab6afb1e, 0x978c2aed, 0x34a17f56,
-	0xb3f4f90d, 0xac142aaf, 0xee3c5b1f, 0xbb60bfa1, 0x1fa667f9, 0x9bde90db,
-	0x8f5a394e, 0xaa9edd63, 0xfa41d8fc, 0x9d112c79, 0xb9b59923, 0xa63a434b,
-	0xcd1c6f93, 0x3660d76c, 0x7af4d3d6, 0xd95d7cc0, 0xa595807c, 0x42e0f93d,
-	0xaf597125, 0x577f21b3, 0xa3dffdda, 0xabb025ba, 0xaa2aeca2, 0x7b248863,
-	0xb641cc97, 0x7b92b1f7, 0x95bbc605, 0x127fff0e, 0xd17b0dbf, 0x91a43fa4,
-	0x49a9987f, 0xbcb372e0, 0xe1a49383, 0x95bf46e7, 0x49ff458e, 0x25debafa,
-	0x98cd7db3, 0xc741692f, 0xfa35fb48, 0x96ab38cd, 0x9e66fc91, 0x72a26f2f,
-	0xeb8b8559, 0x9ab355be, 0x1ccbfec8, 0x94bf7b97, 0x65d07fdf, 0x512dbd66,
-	0x389c5fb0, 0x8e9bf468, 0x7bb8464a, 0xf8312ba0, 0x69f5e92c, 0xd612637f,
-	0x8ab27917, 0x0337dd64, 0xb63b5dd7, 0xebe57b51, 0xde576cad, 0xf2e12f24,
-	0x6990a899, 0x21d0bed8, 0x2a64c379, 0x4a6a3ff3, 0xe4a776a3, 0xd42db625,
-	0xa6289da6, 0xbbd96cf6, 0xd5a7ea90, 0xa7510a32, 0x2ef38594, 0xb9c5bf60,
-	0xbe1b5e29, 0xd0fc2a77, 0x85dfd245, 0x04de49b9, 0xf04af3f2, 0x7baa1ae9,
-	0x9506dead, 0x6958f1d6, 0x4aa38d32, 0x5bd6135e, 0x1ffd286e, 0x2f894744,
-	0xda892405, 0xd7e10a5d, 0xc3f77f27, 0x6bf62732, 0xd9012719, 0xde70a9cf,
-	0x85fe889f, 0x026a899d, 0xb38b69f9, 0xb16bde8c, 0x5c4dce48, 0xff5295f7,
-	0x7d598e40, 0x7e3dc71e, 0x41e39d9b, 0x8c055be5, 0x36df8e83, 0xe542e386,
-	0xa84bf35b, 0x78126e3c, 0xcaadf2bd, 0x41376e0a, 0xe54a9c98, 0xf7e2dfed,
-	0xb0fe97b6, 0x1fe38dcc, 0xdf62ef1b, 0x562a7282, 0xf624fc22, 0xbfde8907,
-	0x77fb9abd, 0x9d0f9948, 0x0b17fec5, 0x38ac8a52, 0x213bb97f, 0x58c57faa,
-	0x497d5457, 0x2562a8f6, 0x16564fc2, 0x6fd54564, 0xb38a9628, 0xe6fbfa23,
-	0x57d54427, 0xb38ab994, 0x54dffa23, 0xbeaa2a39, 0xa8aca6f2, 0x1cd342fa,
-	0x61ea3fe1, 0xf3b0997e, 0x20d965f9, 0xa9fc898c, 0x037df453, 0x3b26efdb,
-	0xa9f812ef, 0x09f885c8, 0x55d652e5, 0xd8b971cc, 0x00affbae, 0x92667b74,
-	0x2ebf17ff, 0x83de8f1c, 0x4999fe20, 0x16fc4878, 0x201e2376, 0xdc60a47c,
-	0xcca7a08e, 0x2bc71d11, 0xff27cd40, 0x84b9d15b, 0x67b954f1, 0x319a1979,
-	0xbdfa31f2, 0x8161f90a, 0x2ee86243, 0xa5c732ea, 0xf46c62b7, 0xabae06fb,
-	0x316be9d0, 0x09529bf9, 0x6eb4058b, 0x7ac635c2, 0xb72e3a0c, 0x8ef90a9e,
-	0xdfff1432, 0xfd2c575c, 0x7f791b00, 0xa0d74b11, 0x8881c74b, 0x760718a7,
-	0xc43e32a6, 0x3e1e3b9f, 0x254f7030, 0xa45737fa, 0xee48737f, 0xf79785e5,
-	0x97b8c66f, 0xb8c67bc3, 0x2cd0fbc6, 0xfbc6fcf3, 0x2955cf43, 0xd89df3fe,
-	0x73ce293f, 0xf9ff14b7, 0x17fdd173, 0x03a36a28, 0x4828f8ed, 0xfbf100de,
-	0x2410aab8, 0x35ad3d2b, 0x43e8b951, 0x747842bf, 0x1340d9f1, 0x837af395,
-	0xfeb8adc7, 0x956572eb, 0x1e060df2, 0x8cd75d8a, 0x3a4fb154, 0xabb5497a,
-	0x5012ded8, 0x68bfb4ed, 0xd3b55879, 0x8345aa3e, 0x6a2fda0a, 0x691b4d13,
-	0x63e5a1bf, 0x549cf589, 0x52f3e7e1, 0xca318e05, 0x5e7f6567, 0xb6d5962a,
-	0x8b09479e, 0x60317cd4, 0x94703021, 0x48c15e70, 0x0954779c, 0xa3be683a,
-	0xbe1d070f, 0xa57e3f08, 0x29146f38, 0xa7e93a5b, 0x91fa45a4, 0x16825b52,
-	0x391637e9, 0xaff5515d, 0xc7d8aa9c, 0xbd45467b, 0x159a9d77, 0x6bf10fd5,
-	0x46a0e12e, 0xe42ae40b, 0x5e894d47, 0x7cb177c2, 0xfd7d17fc, 0xe093875e,
-	0xaadd9813, 0x97138fec, 0x7f82a5bc, 0xa457cfb1, 0x6fea7d8a, 0x6e583d68,
-	0x35f4154f, 0xe2013ec9, 0x3e933710, 0x4f71d6c4, 0xc3c68aba, 0x77a43d91,
-	0x22e9bb5e, 0x4ef86f42, 0x29d7d5ea, 0xe9decfa8, 0xc44eefa6, 0x8ba923fa,
-	0x699e7d44, 0xffac04cf, 0xd45cb534, 0x374d36af, 0x057e017b, 0xc32baf8b,
-	0xe7dbba7a, 0xfb79c54f, 0x12ad8ecd, 0x24c519e2, 0x787b9141, 0x0588fbff,
-	0x160a29e3, 0x21734c95, 0xd8ab76ad, 0xa024d72f, 0x25fea3ff, 0xaafc4a9a,
-	0xdce43049, 0x1d714193, 0x9134ceee, 0x6ff630bf, 0x87be0b76, 0xfcd8e7ef,
-	0xc25f42b5, 0xa5fa2ac9, 0xca2ff7fb, 0x9ed8bd24, 0xe7f5e4ea, 0x21e799ef,
-	0x7d74857f, 0x7ffdfa97, 0x3c536ba4, 0x62cc9aba, 0xfc96de9e, 0xf9bb8a52,
-	0xd21c51e3, 0xbb70bcb0, 0x4213cfcf, 0xcb8c2ba8, 0xf5848f35, 0x4bc59746,
-	0x90fb7d38, 0x6cacaf7c, 0xb213f3d4, 0x9c8de85d, 0x1bb8da62, 0xfaeb9fcb,
-	0x3bcd14f2, 0x1819e683, 0x01f51cb7, 0x56e3039c, 0xe93a8a14, 0x0d172c83,
-	0xf81ede10, 0xf7979256, 0x7e0763c7, 0xbfac03fb, 0x97be4777, 0x8907f470,
-	0x82ab3f82, 0xb07b1a13, 0xbc1acd3e, 0x3e748c2a, 0x967fe694, 0x6b36e0f4,
-	0x9beb1270, 0x8d126363, 0xfbc0692f, 0x877f6310, 0x32d538fb, 0x1fee2471,
-	0x88d82f39, 0x11ccb7cf, 0x45e6367c, 0xee28da9e, 0x3c5b37bc, 0xf9c0e837,
-	0x06ff885b, 0xc074433d, 0x03c72758, 0x45a47910, 0x61e443b2, 0xbce260ff,
-	0x1f192d49, 0x359cf7d6, 0xcfaebef1, 0xe68057d8, 0x9b933d58, 0x27399e78,
-	0x6c4cc936, 0xd4ccff00, 0xb6af4859, 0xfa7de7ad, 0x7de8ee8c, 0x7f4eacfa,
-	0x9bdf03a9, 0x7cfc7ef5, 0xdc7d3cc8, 0x299410d9, 0x89e9cf5e, 0xdf4f37ee,
-	0x1f3bcfa7, 0x54cdfcfd, 0x868dbe3d, 0x8e7991d1, 0x33ff7d3a, 0x0a427c78,
-	0x3af929e9, 0x516ef919, 0x3a9d9865, 0xeb5a37ec, 0xf90e5fb1, 0x85971b47,
-	0x11779da7, 0xa8f56dfd, 0x93f216d0, 0x7b0d2e1e, 0x770d3c2a, 0x7988d4c2,
-	0xf837bd74, 0xe0bef838, 0xdc9eb4e3, 0xbac7cf9f, 0x410cd3b9, 0x739d7875,
-	0x820d3e75, 0xd3a0f3e0, 0xd99e7cc2, 0x61e9cbf5, 0x98f5647c, 0x5f588d40,
-	0x6a089a82, 0xe7b53f84, 0x65d546a6, 0xce3a3e43, 0x9f8fae98, 0x351d1de4,
-	0x0c37818e, 0x5a9abdf9, 0x643849de, 0xe31d63ba, 0x13d9948e, 0x3e2dc6a2,
-	0x64272b1e, 0x2476e11c, 0xd7089ff2, 0x70a2569f, 0x80772cc6, 0x3fb30038,
-	0xc9706254, 0x68ec9976, 0xe7e8d9ee, 0xc8cbb4e6, 0x84fc72ed, 0xef9f3fa9,
-	0xe9f9fbfe, 0x99f9a2d2, 0xcfcd1156, 0x3f345f74, 0xf3455733, 0x9a3f946d,
-	0x4dd6632f, 0x6abf6a89, 0x7d545163, 0xa37383fc, 0x006167fa, 0xdc4fac8c,
-	0xffaa24ba, 0xa22beda4, 0xba9f93ea, 0x5e7faa2d, 0x7b544d70, 0x2baacefe,
-	0xa8617f92, 0xb11faa2e, 0xf20df4d7, 0x1fedbabf, 0xeff9e6a2, 0x34a2ff96,
-	0xcbaf2f3d, 0x438e997f, 0xc7fa1a5c, 0x4538e1a2, 0x93f215e9, 0xbe37f6ae,
-	0xa04bfca0, 0x53bce544, 0x1b780960, 0xd909edb1, 0x1b5f9127, 0xa136ac83,
-	0xc13268df, 0x8ff7f23a, 0x879c4c9a, 0x2abcec34, 0xaa8be04d, 0x9ff7e134,
-	0xf8a69b46, 0xeccff066, 0x78449ede, 0xa0993643, 0xe29ae29b, 0xc671bf65,
-	0x716be101, 0x7034793e, 0x7934ab5e, 0xa899b2f6, 0x329bf287, 0xd1e51fef,
-	0x7d71507e, 0x3f1fc78d, 0x8b9ff941, 0xfa4a9b0e, 0x03faa72a, 0x7d70b714,
-	0x2461e7a1, 0x3eaf795e, 0x49f6893c, 0x67957d46, 0xbfea66e3, 0x93858eea,
-	0xf43aff68, 0x498e8efc, 0x88721165, 0x388adf5c, 0x697be8f8, 0xc4673f22,
-	0x6aacdb87, 0x6bca0f63, 0x3ffc2c9a, 0xa5ef85c6, 0x903ffae1, 0x9c0b361e,
-	0xbad33015, 0xde724e31, 0xba8085df, 0xe194cb0e, 0x8d7ea478, 0x84c1f54a,
-	0x26f9dc68, 0x08fb4411, 0xffc72a5b, 0xbb7f0d5b, 0x36f98f2e, 0x3fee88e8,
-	0xc144f778, 0xd7236fcf, 0x2c67df90, 0xdd061d62, 0xfc3f75e7, 0x7b87eea9,
-	0xe446ffc9, 0x78edd79b, 0xf5f0893c, 0xa7815c99, 0xe8cfe78d, 0x4d267d72,
-	0x3bf5e9e0, 0x79919c13, 0x2b90eac7, 0x36db5eaa, 0x423679ca, 0xeb1bd70f,
-	0xad0a4bf0, 0x3f6e8363, 0xc93d9dd5, 0xf1e301b7, 0xdc70d3a7, 0xbf171d9a,
-	0x37de8fbd, 0x3888640d, 0x6ef9e01a, 0xd7180f79, 0x4415f2df, 0xd297d2e1,
-	0x25e57e44, 0x95cb0ba2, 0xdf513858, 0x776c6256, 0xfcc6f951, 0x7c3bb272,
-	0xbeb0961e, 0x84cc13ac, 0xb3fb96d3, 0x53f4c4cc, 0x2f677de0, 0x9a5f6d2e,
-	0x04dcf3ca, 0xc5c5333e, 0x9d5dbf77, 0xc686fd44, 0x4319c633, 0x2bd459b9,
-	0x419cc057, 0x246b9af9, 0x9f380dc6, 0xeefb9e8d, 0xe299b318, 0xbbdf31af,
-	0x0ef0bfe0, 0xf00ac5ea, 0xf8c6b8f2, 0x7e51a900, 0x90cb03f8, 0xbf24ed1c,
-	0x98532eba, 0x677539f2, 0xd1fe7cac, 0xebf030df, 0xdfce9007, 0x57b17d55,
-	0xbb7fba42, 0xfb57e07a, 0x4fadf9f0, 0xb5c5dfa1, 0x87fddb66, 0xc3ce22d3,
-	0x917ddcce, 0xc8f10ced, 0x33924ff3, 0x25eac97a, 0xeaa0f8fb, 0xbc489ca5,
-	0x616d227f, 0xb307bd27, 0x479ee2d3, 0xab2beec4, 0x6ed93f48, 0x8699c655,
-	0xeba7de5e, 0x930bdd65, 0xd25d79f9, 0xfd447ad0, 0x57f39979, 0xbcac0775,
-	0xd7477fbf, 0xbf17aa87, 0x9f991998, 0x54bd416b, 0x7274a873, 0x2a9ce749,
-	0xf1cf66f2, 0x6fd4a9c1, 0x21efeca3, 0xe978393d, 0xefaa64e3, 0x5e4bf379,
-	0x6574dc0f, 0xf323f7f4, 0x9b5cf922, 0xf92ef034, 0x567dea93, 0xa550f295,
-	0xdd8ef2fb, 0x4e9af58e, 0x9eb83bf4, 0x239eae0b, 0x6a7ed34f, 0x979404bf,
-	0xb02709aa, 0x9569af73, 0xaac79482, 0x65bddb6a, 0x9aabd60c, 0xba931797,
-	0x3f0b26d6, 0x0522d356, 0xa7f03c69, 0x748a7f31, 0x357d28db, 0xb00b1fef,
-	0x18a8efbd, 0x787d5cff, 0x4ff459ea, 0x9d9f2d7d, 0xb4363a23, 0x763f3959,
-	0x196c292e, 0xd85ef383, 0xea02852d, 0xb9f6ddb0, 0x5d6a3ec4, 0xcd0b31e8,
-	0xe5b9eebb, 0xfb0f04d9, 0x90b49df6, 0xfad75c7f, 0xbcfeb958, 0x20fb8458,
-	0x9dfac5db, 0xf322931d, 0xfc21f749, 0x81f8c883, 0xf70805f4, 0x09e39082,
-	0xdaab3e5d, 0xbb123627, 0x7dedafd0, 0xe6bf625a, 0x3bdf9374, 0xffdfebb8,
-	0xffdde695, 0xff98932f, 0x7fc657c5, 0x4f1805f0, 0xc0f3e8d4, 0xda1653f9,
-	0x9ab4d61f, 0x173bc5cf, 0x77dbbefa, 0xf0c67b95, 0x571636fe, 0x3880b16f,
-	0xc10099b7, 0x381e29e7, 0x91ab2c06, 0x07511f9e, 0x0e7147a4, 0xdd60d658,
-	0x71467646, 0xc608e3c2, 0xb9d717db, 0xf70f9e15, 0x9de31b08, 0xedead657,
-	0x858f6aa5, 0x9e3570f2, 0x75e90b5e, 0x7113f84d, 0x51f6df5e, 0xbf6716b9,
-	0x7e16ed5c, 0xc303d0d3, 0xa7d2ebde, 0x87985db0, 0xc6c860e2, 0x66b85f76,
-	0xdd53e280, 0xda0ed47e, 0x03fcb817, 0x6f607744, 0x2beb4a82, 0xccc9f7dd,
-	0xfe79889e, 0x5187dba4, 0xa3f979af, 0xe7e266a9, 0x2aa68f9e, 0xfbcfc349,
-	0xe2eb1c32, 0xddaa55e5, 0x4e6f4e22, 0xb68f9df6, 0x186f0483, 0xb769ade7,
-	0xda07f9f3, 0xe28e96c1, 0x75b83b48, 0xf3d20edd, 0x168bd976, 0xcb6d3501,
-	0x3fdc0dfd, 0x91e24bc9, 0x480616db, 0x8fa7650f, 0x8afe13f5, 0xcfd4cdf3,
-	0xae52267d, 0xe91b7fdb, 0x4f08e291, 0xd46bcc8a, 0xd17e7a98, 0xb75c9121,
-	0xaf9a266b, 0xc96fd808, 0xef0f5f0e, 0x54338a9f, 0x9e1ec7da, 0xa7c40e51,
-	0x38901e9f, 0xf54e6b5f, 0xf922cd6f, 0xbfb9951e, 0x010bf0e5, 0x9bee973a,
-	0x9f44c506, 0x4e9fdeb1, 0xe38c830b, 0x2f042e6c, 0xff79bb4d, 0xdfd21e2d,
-	0x611fa69f, 0x86f7617c, 0x234afc80, 0xe7ca06e2, 0x61420bd8, 0xd721271a,
-	0x3ce32c57, 0xf3276e79, 0x7bf562cb, 0x4d941f29, 0x4d875c75, 0xfa23adf1,
-	0xb144ee6c, 0x657b1e9f, 0xb23eba79, 0x1bce857f, 0xe92f9cfd, 0xed3d0b33,
-	0x5f180abb, 0x399d1df3, 0xbe09a4d4, 0x6b2e76c1, 0x46a63adb, 0xf044dbc6,
-	0xdf79e8db, 0x44bc5bfe, 0xd75139bf, 0xb6448cf7, 0xfff9d88b, 0xe499f499,
-	0x35b35a6e, 0x7c4cf88b, 0x7bf64753, 0xf067ef5a, 0x2e7f1403, 0xaa922bd9,
-	0x8d0fcbc5, 0x4e3c9777, 0xea9cdd72, 0xf01575cb, 0xc300acf1, 0x76b8c49e,
-	0x57fffd87, 0xe91fff64, 0xf8a2dcfc, 0x4ddfc46d, 0xf16cdd7a, 0x7fb64ea9,
-	0x0ff34a9f, 0xfc746fad, 0xf6e9b5f5, 0xff8265ba, 0x4fb7d71b, 0x15399f5f,
-	0x4bc68df5, 0x4e67ee06, 0xff48060e, 0x78a0929a, 0xec3e3e13, 0xdd90f72a,
-	0xc5f4396d, 0xa6f7b238, 0x2807af24, 0xd66075af, 0x2dfbb22a, 0xfd636fa3,
-	0xbc85f4ff, 0x9e623922, 0xad256913, 0x697ebfe4, 0xcfe2cbac, 0x42fc75a5,
-	0x5d6323d7, 0xabdf6ee9, 0x11bc88ee, 0x915f758c, 0x9fbe80fe, 0x17f1eaf3,
-	0xff9c73f7, 0x2f4487eb, 0xd6ee279d, 0x3e02b771, 0x783b1bd6, 0x1a55c655,
-	0x1f7ba31c, 0xd8261d8d, 0xe4a6cb46, 0x5d39c454, 0x36326cb2, 0xb70d9a7d,
-	0x4c6c74e6, 0xebba6fed, 0xbd213496, 0x0b2021fb, 0xaf9d167c, 0xa4d24d00,
-	0x6bc53cc8, 0x14f3f155, 0xc91bf8cf, 0x9e56ff2e, 0xb4d84e62, 0xf7f292da,
-	0xbace2be7, 0x9f3df7a3, 0x2a2655ba, 0x31f42b94, 0x8a0c4e14, 0xa74c17bc,
-	0xf133537d, 0x067bff12, 0x2df6cad7, 0x5cdae5f5, 0xfbee4f68, 0x8b1d6db7,
-	0xd62d9776, 0xfa46f54f, 0x3dc0a77b, 0xd78ff943, 0x46ee30a6, 0xfef3273f,
-	0x12d3a9df, 0xc462b723, 0x88f7c06b, 0x27f2a352, 0x265f23e1, 0x4aed7e93,
-	0xb922df55, 0x7cc9740c, 0xe941244f, 0xd8e2b8b1, 0x03c23ed9, 0xd38bf7e8,
-	0xd6c43ec5, 0x6d17ce26, 0x317ec6aa, 0x269ce9c1, 0x79c5d847, 0x579fc8b7,
-	0x9c60f91f, 0x05dc3105, 0x02e4f1d3, 0xdec37f1c, 0xc34a6496, 0xf6f33fad,
-	0x5392ba4c, 0xe91df8a2, 0xa54ffeb8, 0xc236391d, 0x53835ba9, 0xf0a13f89,
-	0x93f21484, 0x94040a85, 0xf1f138a2, 0x14de22a9, 0x87c53cd7, 0x3ed850ff,
-	0xe5e12d7d, 0x2f58b0da, 0xa6c661cd, 0x7ae036bc, 0x2a635b5f, 0x6ffb578d,
-	0xbf934607, 0xe05d297a, 0x4d2f179a, 0xa02bef11, 0x74acff50, 0x41e7ae97,
-	0x5f0be513, 0x7d8cf3d2, 0xcfdc4c97, 0x6db0bf98, 0x3d44eca1, 0x3f6f0828,
-	0x76cd79c4, 0x4df24aab, 0x3f040e78, 0x771813da, 0x0c5c1ed6, 0x5dfae714,
-	0x7db095e0, 0x6fc0e257, 0x0e061f49, 0x773a5558, 0x876e704d, 0x977f1c54,
-	0x0f2b4f7e, 0x31c5b215, 0x2f98dcfc, 0x94e7fda1, 0xe0bd2413, 0x6504dff3,
-	0x88e35c3b, 0xd31277e4, 0xd5eba25d, 0x89b0c4ae, 0x260645ce, 0xe9875ee1,
-	0x7813a61a, 0x3cce835e, 0x2cbbfbf6, 0xe07ee703, 0xa49cba66, 0xe8207907,
-	0x2ac9f684, 0xa704d1f9, 0x7048ebc6, 0x3480deaa, 0xa9daae92, 0x6ed0fc08,
-	0x35e7251e, 0x6baed877, 0x36eb8713, 0x135d85b4, 0xff8f3f40, 0x8f3a36d5,
-	0x8393aa1f, 0xfefc3d99, 0x6c2fe92d, 0xf9cb1a6b, 0xa28c80bd, 0x949963b6,
-	0x7954eb4a, 0xb545e87d, 0x07c122f4, 0xb767afba, 0xfea1f689, 0xaa0ee7a8,
-	0xaf3f443b, 0x925f69d5, 0x8742f6c5, 0xf07843d7, 0xee7c297e, 0xded7b45a,
-	0x05297cc7, 0xd35eaeb8, 0xb19a07a1, 0x87569fdf, 0xe93ee872, 0x1aff5673,
-	0x3e57cfd2, 0x2148f35c, 0x665ddbf9, 0x9df9256f, 0x18cfc09e, 0x5668bf87,
-	0x1dd845b7, 0xe0c81d8c, 0xf33180fb, 0xf4d99ed4, 0xfdd7c233, 0xce9525fb,
-	0x03cdfbbd, 0x9aee88e3, 0xe85a3ff6, 0xfeed64be, 0x4b4f188f, 0x9a1afe19,
-	0x035b766f, 0x039b6bdf, 0x1b5ef9db, 0x9fbe43fa, 0x7f08f218, 0xe73a7832,
-	0x390886d9, 0xec2e913c, 0xe3fc060d, 0xebb55e29, 0xf6907af6, 0xedee58dd,
-	0x8d2275b8, 0x07cf57bf, 0xc035ef18, 0xf7c431a1, 0x971af04d, 0xa0fef3c6,
-	0x967a4152, 0x4eedaeff, 0xa3ffa22d, 0x3dbf02e9, 0x66702e9a, 0x89bf8676,
-	0xf1df5de8, 0xd69925b1, 0x8e343679, 0x4521b9f6, 0xf1c6714d, 0x1bf64323,
-	0xcab54f63, 0xd7fa8580, 0x2bf6079e, 0x14a6ef28, 0xef4bdf94, 0x8d594db6,
-	0x4ca2f7cf, 0xe2ae2852, 0xefe294fe, 0x0c6fb35e, 0xe7786ff5, 0xc7e4a9f3,
-	0xe74f481e, 0x607e7ff5, 0x1be278fd, 0x22497fea, 0x606ed9d9, 0x69d866bf,
-	0xbe29d901, 0x5ffa405f, 0xf63cf54c, 0xdd2cbbcb, 0xf72ed84b, 0x12ec809a,
-	0x01ed9ff5, 0xf849dff5, 0xf689c0ae, 0x664fefc0, 0x6dd5df3b, 0xa32718d2,
-	0xf5c49f5f, 0xbea91b92, 0xc9ccbbab, 0x05f74e76, 0xc35ec88a, 0x109c7887,
-	0x9d1224c0, 0xfca8be04, 0xe9993b88, 0xe7e5fc36, 0x86e3d06e, 0x75c5e29a,
-	0xca3965d8, 0xa4e2223e, 0xf4711ba8, 0x9edb33c9, 0xee817b40, 0x0fdc28d4,
-	0xffbf0bef, 0xd5563d5d, 0x59773ebd, 0xeeb3ae33, 0x07edcc84, 0x585e7df5,
-	0x7a4393d7, 0x86e2867e, 0xefdc5d3a, 0xb033e7a5, 0x675df74e, 0x094b1b6a,
-	0xd8aecd63, 0xb9ca987e, 0x412950be, 0xbaabf9c8, 0x99859b0f, 0xb5fe93e7,
-	0x9f2eba1e, 0x9ff5cdee, 0x920242b1, 0xc0e5fad8, 0xb5c45f6f, 0xf910703d,
-	0xe14e271f, 0x10ff5872, 0xcf018d6f, 0xc97ef6c8, 0x4bbd23f0, 0x5afb1f48,
-	0x123ae1e5, 0x4d8a8352, 0x3fd277f5, 0xbac016dd, 0x9f7b433f, 0x99c7e254,
-	0x3f49f7fe, 0x997e4ffb, 0xf7b96641, 0xb7c7d8b4, 0xd27cb45a, 0xb809d69f,
-	0xa7a38db5, 0x3c8ba5af, 0xe215b14f, 0xa57e4b9e, 0x009cc1c7, 0xfef1223c,
-	0x5106765c, 0x655a17ee, 0xe7f882cd, 0xce56043c, 0xe7a37f23, 0xfd01ef6f,
-	0x941fe1a7, 0xf57abdcf, 0x182bc21e, 0x627deeb7, 0x89bfb9c4, 0xbb6d69f4,
-	0x6b84ff04, 0xfc4cf75f, 0x5e46097b, 0x1db6beeb, 0x3ca0c647, 0xee8b9eab,
-	0x9ee861b7, 0xbdf7887b, 0xefa39a1b, 0xae957c1b, 0x308996e3, 0xea0b7091,
-	0xb307fb13, 0xd4569d02, 0xfd3257df, 0x7e5e109f, 0x84f824c9, 0xf2ed957e,
-	0x671eb713, 0x1a3f844a, 0x8f7c00b8, 0xe8676f28, 0x99d7dd30, 0xa5e59cdb,
-	0xa22ae639, 0x165b6e7d, 0x825019c7, 0x9837dd32, 0x19cbf9ad, 0xd3b4075f,
-	0x9d642f74, 0x89c127ee, 0xa3bf287f, 0x8e9d6baf, 0x460beee7, 0x82073dd3,
-	0xdacf348d, 0xd1fee29d, 0xbff19dfa, 0xc7d5a813, 0xc9d4f0d9, 0xac0e9423,
-	0xabf7450e, 0xdb53f9d5, 0x05bcfd16, 0x9f181278, 0xfccf7d11, 0xfc43ef4a,
-	0xc5f02cc9, 0x4638fadb, 0xc219b5fb, 0x7920d67f, 0x410ddf24, 0xb37a4839,
-	0x0b240a4e, 0xd58e0b7c, 0x865df748, 0x65f7e8be, 0x73f9d6ef, 0xbc2fae97,
-	0xfabf7c2e, 0xe7482919, 0x24ff7780, 0x427bfe9a, 0x1f49cbab, 0x5d6af562,
-	0x6df199b3, 0x10b46c15, 0xabd58dbe, 0xd97d21aa, 0x1638a16e, 0x7e354fab,
-	0x0b7432e9, 0x4b7ffe5c, 0x98737af7, 0xffeb4cf3, 0x3ca5e4a7, 0xdfadbdd4,
-	0x745e50b1, 0xf9087da4, 0xa27a1956, 0x5defebaf, 0x7c86edcf, 0x9614c0a7,
-	0x15da456f, 0xf1a283ee, 0x50cb6ef4, 0x7cf3929e, 0x38139d83, 0x51e86e3f,
-	0x3ae538ec, 0x14fc5f2e, 0xada17970, 0xa2f84ed4, 0x2bc9b8ff, 0x4c7f9ca9,
-	0x4c3e442e, 0xe103203f, 0x89f6fe8d, 0xfe90078f, 0x37c513a2, 0xfa7cbe52,
-	0xd83f8c09, 0xf8b3a7be, 0x115fe457, 0x7d91a4e1, 0x4ecaec2f, 0xc783bdfb,
-	0x7fddf8e1, 0x4af1e8bc, 0xcbc7c3f2, 0x095c698a, 0x787ee9db, 0x1a871e91,
-	0x7bd9178e, 0xfdd1e222, 0xbedf2219, 0x47fbf3c5, 0x78b05f69, 0xf94bd9b7,
-	0xff66c58e, 0xafa404a6, 0xdbc905e8, 0xe91db380, 0x8d24f43e, 0x52a4f68b,
-	0xeef166be, 0xf6a21def, 0xd3125dda, 0x28bedfdf, 0xc7c5177f, 0xb8a5eca0,
-	0x577edfd7, 0x7384bdc1, 0x7053dc0e, 0x477cc457, 0x595f8552, 0xe399957c,
-	0xfb68ef71, 0xcf292b2f, 0xff60eda9, 0x1eeafbd0, 0xb0577f0b, 0xae0f024b,
-	0xf0e788f3, 0xbd0f89af, 0x085a4efb, 0x9eb697e4, 0xf1c4f4b4, 0x017946cf,
-	0xce6171b7, 0xf0b76ebf, 0x7fbdca3d, 0x6b7ad0b0, 0xf388fb9e, 0x126d5569,
-	0x67aaa7fb, 0x794aa0e4, 0x58af039e, 0x9a6b3f48, 0x8accc825, 0x3b73376c,
-	0xffaa51f9, 0x65f859b1, 0xe8d7ef43, 0xbde86e7a, 0x746b0761, 0xd6d775ff,
-	0x17bf3d68, 0xf1a32db4, 0x579a7bfd, 0x7ba03df3, 0x5ff7c7b6, 0x4b5c1f86,
-	0x2b8c52fb, 0xee8a9f6b, 0x7e90df77, 0xc7bfd807, 0x3257c9fa, 0x3cd8f3f4,
-	0x1efd23c8, 0xaf19af0c, 0x7e7d3da0, 0xc43c6ab2, 0xd71e3bc9, 0x8f1180f1,
-	0x8e26c307, 0xfafdb167, 0x285a2eda, 0xfe76d68e, 0x796bf199, 0x872c67fb,
-	0xbe0ef6ca, 0xf83d7aaf, 0xaf1f1037, 0x093bb76f, 0x08f65747, 0x6ed25fbb,
-	0x6a25060d, 0x7c91350f, 0xef8a0ffb, 0x4aaf023b, 0xf740a38c, 0x7e756b7f,
-	0xb7f9d5ae, 0x6367f716, 0xbe8adee8, 0x772fbeff, 0xe2ba11c7, 0xdf3fa351,
-	0x993875d0, 0x8404b8f8, 0x12125a7f, 0x8790c9fe, 0xc6465f11, 0x936f81d1,
-	0x5bb7d73c, 0x52f8bef9, 0x6d2d3fdd, 0xc593df16, 0x51fe8bfa, 0xddff9176,
-	0x8d8de82b, 0xd1ad35a7, 0xd232bbfd, 0xea0fdfd9, 0xc313f878, 0xa8f2e8df,
-	0xe53b001c, 0xb2a897e7, 0x756fc837, 0xe77f342b, 0x63cf8954, 0x2989d53b,
-	0x194beef1, 0xce3a9be5, 0x28cbea37, 0x43fd864f, 0xc88eedce, 0x998dfc7d,
-	0xcd54af02, 0xcf240391, 0xb2cf7d88, 0xfbb8aca2, 0xba44c81e, 0xd77b18df,
-	0xee45a64f, 0x391db47b, 0xf23f67a4, 0xf7495e3c, 0x859b6a8c, 0x8d9be87f,
-	0x8e10a6e3, 0xb5c5c607, 0xed20d6cd, 0x4f516a4f, 0xd2307bf8, 0x76bfb20f,
-	0x07e91169, 0x991c1bee, 0x3a72cf48, 0x2ff5c4aa, 0x8e38c36f, 0xfb2f2fc3,
-	0x2baaf58c, 0xf91bac5b, 0x1f6f1996, 0x6a1fec61, 0x6a9c092e, 0x7a51af3c,
-	0xd3511f78, 0xb749ee2e, 0x5c62fa1e, 0x7fdbd216, 0xadc63fe0, 0xa64172c6,
-	0x25adbf88, 0xbee98fa1, 0x6cbbe7cf, 0x90e8f171, 0xd89a97bf, 0x3dcc6a0e,
-	0xf6578c19, 0x859c2e23, 0x4fedf37e, 0x7ad1df79, 0xca4ee128, 0xf1adf5c7,
-	0x837e778f, 0x13601a9c, 0xd04ddae3, 0x9ee125c4, 0xd6b81c48, 0xdd0fee29,
-	0xaa49c7ab, 0x7d7a8c3f, 0x505df62f, 0x03eecf14, 0x2349e65b, 0x1bf0dded,
-	0xafbebad5, 0x85b1d82f, 0xf163e08e, 0x476eb551, 0x2e39fc88, 0x1ba2e2c6,
-	0xb4f5a333, 0xc644ede1, 0xb25dfdb9, 0xc8c47293, 0x268c5fd7, 0x7ef887dc,
-	0xeb3c9c42, 0xf65ebaa7, 0x0dbee7ea, 0x9be665b3, 0x0d288e69, 0x63fc851c,
-	0xe93fe97d, 0xcb1c5208, 0x04caf83f, 0x9dfaff92, 0x2445e7d1, 0xdfdf3f3f,
-	0xaafcb20a, 0x433e7643, 0x3a5fda32, 0xd214caf8, 0xbfb786b3, 0xf97211cc,
-	0xbee2c722, 0x29467d3c, 0x6bff6249, 0x77fec492, 0x4c93d2af, 0xfddaaefb,
-	0xfef22fb2, 0xbbe721bc, 0x4501fd75, 0x65d7f3ec, 0x686f5caa, 0x3a617a17,
-	0x7f9c4a20, 0x98f3c8a5, 0xed11fe79, 0xdf2fa825, 0xe880b710, 0x9ad7d942,
-	0x6aef5807, 0x9e989a4f, 0x198393da, 0x05ef11d9, 0xf24cdc68, 0x801b0d7b,
-	0xc81d88fd, 0xefa52ebf, 0xf4beb10f, 0x59c604fd, 0x523c2647, 0x64adce29,
-	0xc0f5bf20, 0x239355db, 0x3d05fffd, 0xc1f103ee, 0x09e72843, 0x87cebf31,
-	0xcf42b04d, 0xae3d0813, 0xee2c71d2, 0x8ec89aaf, 0x5757f763, 0x0e1b938a,
-	0xc7f28158, 0xf9581fb5, 0x07e7d03e, 0x1dfef2d6, 0x9327f92e, 0xffbf019f,
-	0x381f2a6a, 0x3d3276b8, 0x7de0fcff, 0x53de7357, 0xaf9514da, 0x1e7d1008,
-	0x797f51c2, 0x97c276f7, 0x90e30a5d, 0xefd3aea2, 0x9eeaf9d2, 0x9b7f3356,
-	0xc677bd59, 0xc22481e3, 0xe94b454f, 0x9d3d9dbb, 0xe21feb0a, 0xd947032a,
-	0x289d4719, 0xe3851c66, 0x165c82f8, 0x71a4ab1f, 0x5314944f, 0xc9db0937,
-	0x1c274d9f, 0x55c618e5, 0x9cff3d06, 0xdfd9f829, 0x13f9c091, 0x3d082609,
-	0xba28ec83, 0xcebeb437, 0x9b436438, 0x86bdf51c, 0x4ceedef1, 0xd7b0ae71,
-	0xa490b3d0, 0x16ed1eb1, 0x3db686e5, 0xf58eb419, 0x49eb10e6, 0xb459b343,
-	0xd02512ef, 0xfe0ccdf9, 0xfc4038d8, 0x508f4639, 0xc12c4b2e, 0x77db84b1,
-	0xea079d0f, 0xe28239f7, 0xe7635d5e, 0x686efe44, 0x3b8f73b0, 0x4e39fc5e,
-	0xda4833e7, 0xcfb12cd1, 0xf3af6d89, 0xd1c67c88, 0x1e2fc233, 0x1c9fe85d,
-	0xa0063fcf, 0x25fbec44, 0xe6ad7e5d, 0x86e7788a, 0xdf223d1b, 0xe06c73b4,
-	0xef71e928, 0x373e04ee, 0xfc8975ec, 0x974b696c, 0xac9fdf42, 0x5066956f,
-	0xfb9f5a3c, 0x829f7f1e, 0x83f662f5, 0x6e7cfde1, 0xbbbcdd5a, 0xc7438b5c,
-	0x1f111eb5, 0x01dfe897, 0xbd57d08f, 0xd37814fd, 0x23da7df5, 0xaa735e74,
-	0xdf14ecd2, 0x4aef8999, 0xf9fdd06f, 0x199bd78d, 0xd5029d37, 0xc43fce2c,
-	0xdd32c539, 0xfba0df2f, 0x3bdf11f9, 0xe99b033f, 0x7bf6229c, 0xdfafc367,
-	0x02bf8fac, 0xf6371e34, 0x759bf5bb, 0x2fb3783c, 0x4ca5f9fa, 0x40e6071d,
-	0x10f3f90e, 0x1fbe17c6, 0x71c09791, 0xa4e1697a, 0xbe8338b8, 0xeff55703,
-	0xe434a9c0, 0x1ef790de, 0x1da3bfc7, 0xdfcd7e67, 0x80499c13, 0xc5ce7109,
-	0xe19fe386, 0xf2126e3f, 0xaa2dcfd6, 0x4346829d, 0x077017ee, 0x331f9916,
-	0xe7463ee4, 0x3df1ffff, 0x22505ca0, 0xcacf25f3, 0x3a1e31fe, 0x32f5b09f,
-	0x7015c6fe, 0x8d75c41c, 0xce35d7d3, 0x2edf111a, 0x571d5a8c, 0x97d7877f,
-	0xc471101a, 0x9e4765cd, 0x75627195, 0xfbefe248, 0x5f62c3aa, 0xf6265d5b,
-	0x02ad39b5, 0x49bcaea7, 0xbb126a0a, 0x9f44d3c3, 0x6ccb3fa1, 0x7a180f02,
-	0x5d2fc432, 0xf09da87f, 0x3e3a0dc1, 0xc9a3d588, 0xf94e5dd0, 0xc9345be6,
-	0x472af74b, 0x6abf3f7c, 0xeee4ebda, 0xa83fa72f, 0x22effc6f, 0xf7d1eac4,
-	0x0f12fe3d, 0x07bad3e5, 0xb8e21657, 0x38fef347, 0xe6a6f48e, 0x2df37632,
-	0x3b13888f, 0x7ca3811d, 0x3f45a4df, 0x6bc96fef, 0x747e21eb, 0x5ec7e302,
-	0x3a96f757, 0xbcf9ab81, 0xc09c3abf, 0xb75643df, 0xb0bbf9db, 0xc486d6ea,
-	0xdb7fe429, 0xeb1daf65, 0xcb27ad95, 0xc5959f88, 0xad4a3ee2, 0xb38bdc5d,
-	0x10b7fdb9, 0x3b7bd77d, 0x2df9cfa2, 0xfba8bf3d, 0xf58f3d06, 0xa3091b6b,
-	0xf9f7ffa5, 0x5f3a8d9b, 0x662ebaea, 0xfea9c14c, 0x26afe690, 0xfd7fec7d,
-	0xd71d0b45, 0xa5794ed5, 0x6d88ae9c, 0xefdca8f4, 0x268ee6fa, 0xf41af34a,
-	0xf93a6477, 0x707351f9, 0x82d2e32c, 0xd30fbb2b, 0xa98dffb0, 0x3afaa714,
-	0x225aa6ba, 0x0eb7bbf4, 0xf91c73fd, 0xb7498035, 0x494b855b, 0x25e3a15a,
-	0x07b5c761, 0x3e50670e, 0xb7ec97a2, 0x9277ca80, 0xdeacb1b3, 0x12792a7d,
-	0xa2bd96e1, 0xed19c21c, 0xa503f732, 0xa4e6e727, 0x3336fa48, 0x6242177d,
-	0x9c9e801c, 0xdb230b1b, 0xdb5fff1b, 0x27a4d3ff, 0x289eb6d5, 0x84f837fb,
-	0x3efe7cbb, 0xcad07037, 0xbce808f7, 0xc72115c6, 0x347f7457, 0x644b370b,
-	0x7ce873a7, 0x3b41227a, 0xbaa0ee05, 0x95256102, 0xb2c38bce, 0x96377fb8,
-	0x7d4cf7fd, 0xb84a59fe, 0xcee9ee83, 0xe737cfd1, 0x5bf73742, 0x6a5c0300,
-	0x8befe4e0, 0xe5cbc04b, 0x29785b6c, 0x5082f1c1, 0x099fbf88, 0x73ae2867,
-	0xe63bfd36, 0xe61ef238, 0x0ce7029b, 0x0e74c87e, 0xc51bee26, 0xd75ba7ae,
-	0xf09a59c7, 0xe81d043b, 0x086cee7e, 0x35fbb9f1, 0xbf9fa3d0, 0x3cc75fc7,
-	0xb9d1f7dc, 0x3b6835db, 0x208fcc89, 0xeb4f9ff7, 0xa7ade391, 0x198b2967,
-	0x9f449cca, 0x7d30ce14, 0x75f2bf6d, 0x4d6dd3f4, 0x35df57ca, 0xe283f7d0,
-	0x6f4b73e1, 0xd3ef1bfb, 0xd349627d, 0x97b1bef8, 0x7da6c7be, 0x1de9584e,
-	0x001363f2, 0xe6b3ddfe, 0xc66f6437, 0x07e01af7, 0xfb11e7be, 0xf72d06bd,
-	0x3df0c67c, 0xedfee335, 0x950ae0ce, 0x72ac6fee, 0xaddff8db, 0x9b8db229,
-	0x87ca794e, 0x21bffcd2, 0x6a40fabd, 0x2883c49e, 0x638c19c1, 0x83b2bd75,
-	0x2fd69b36, 0x22f7c669, 0xf432fac0, 0x006401ef, 0xb763b77f, 0x1e69ef8a,
-	0xa5b43d41, 0x74abf6b2, 0x2e1e1a0f, 0x6f2f0955, 0xf4bcd971, 0xe895ae5d,
-	0xdbd30fb5, 0x2ff71368, 0xb16bfb8c, 0x19b46c7c, 0x8daf4a79, 0x77cc7671,
-	0xfcda773e, 0xbfe89bff, 0x9324a93f, 0xcbfe6070, 0x3f7c3df3, 0x7758c129,
-	0xc3eb8d89, 0x37191af7, 0x6a7dd136, 0x1d31aba4, 0xe1e21ef8, 0xba149ca4,
-	0x25d8d51f, 0xa63753ee, 0x9b7fd807, 0xf3fb12fd, 0x4ed2cec6, 0x0e83078a,
-	0x6eabdf0b, 0xaa34f974, 0x4421d207, 0x3ef89ffe, 0x69bbe0df, 0xfd21ef98,
-	0xed91505e, 0xde5157d7, 0x4a1b9a7f, 0x6169bde9, 0xc0f1126d, 0xe5061ef8,
-	0x4e9519e0, 0x7befa3cf, 0xfbe4e281, 0x501c8617, 0x9d995831, 0xb90d7cba,
-	0xf8ef8d38, 0x3bea2535, 0x8f5e437e, 0x98b90a24, 0x44cc26e9, 0x71a5577e,
-	0xf061e563, 0x8f00bffd, 0x30b1ae40, 0x0030b1ae
-};
-
-static const u32 xsem_int_table_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x243bff00, 0xa3f0c0c3, 0x4aef811e, 0xf1303031,
-	0x12d18aa2, 0x6064e3ef, 0x6062e010, 0xfbe20530, 0x330c0c3c, 0x204cf480,
-	0x6066e516, 0x1ae20310, 0xc40dde20, 0x19f8807b, 0x1039fc50, 0x1be200ef,
-	0xbefd103c, 0xfe0c0c4c, 0xc4081c40, 0x95fc40c1, 0x1be18181, 0x73f6f103,
-	0x4c30330a, 0x2ff04715, 0x249fd903, 0xc1ffe7e9, 0xe90c4386, 0xa071df6b,
-	0x10acf37d, 0x7b20467c, 0x9aaa15be, 0xcdf85605, 0xbf268858, 0x18bf8d08,
-	0x0372fe8f, 0x4d5afe54, 0x81b5b334, 0xcd4909e9, 0x6efc4d3a, 0x40aac741,
-	0x3101a9ff, 0x5ff1ad00, 0x000368ca, 0x00000000
-};
-
-static const u32 xsem_pram_data_e1[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xd5947809, 0xe77df0d5, 0x9926665d,
-	0x6c81bc99, 0x44d84eac, 0x4242740b, 0x61db101a, 0x8311688b, 0x9817054b,
-	0x264f6408, 0xdac7f520, 0x0040cfef, 0x8b435151, 0x03b45a35, 0x341b0504,
-	0x024180d8, 0x2d82e00e, 0x5d6ad8d5, 0xc8a0d2da, 0x1b80931a, 0xcefc5dfe,
-	0xc9bef739, 0x82264efb, 0xf5ffffb5, 0xf8f8fefb, 0xf77bee5c, 0xce73ddb3,
-	0xe28ef73d, 0x8b94c718, 0xff12fb18, 0xdd98c7be, 0xd71b18c6, 0x2356329d,
-	0xcf2d4ad2, 0x03d058cd, 0xac62ccff, 0x9785addc, 0x653633a7, 0x5ef91a87,
-	0x4837e412, 0x6de43b61, 0xde549d7b, 0x23e79ebe, 0xa0cfcd6e, 0xc83aa3fc,
-	0xdeded04b, 0x5065c0f2, 0x6643b9de, 0x91dbb11b, 0xc2963671, 0xe30731d8,
-	0xcf90597f, 0xc9c0ac66, 0xf61be5b3, 0x45f6c5cd, 0x84e6764d, 0x1577cafe,
-	0xf20cbcce, 0x86550785, 0x2f37ca55, 0xbe43fad3, 0x60352c38, 0x9f3263be,
-	0x1ca7685f, 0x3bf50cde, 0x37292d3c, 0x553b18b8, 0x8d5e60e5, 0x4b776ab1,
-	0x18a3f5ca, 0xcf6f092b, 0xf52576c5, 0x3a970f92, 0x97e6c765, 0xb6bae1fb,
-	0x97bb3e4a, 0xf12dd2b1, 0xcf923bcc, 0xfff84be1, 0xf91ca358, 0x862f941e,
-	0xb7e83275, 0x32e4d590, 0xab5fc719, 0xf0dddd79, 0xd3a5553b, 0x7cbe4638,
-	0xed038c2b, 0x7c969e2a, 0x1b0ac4b8, 0xf8c0340b, 0xb39cbbed, 0x7d70b937,
-	0x6e11b4cb, 0x1addd75c, 0xe70c2bd6, 0x717a74ef, 0x5cb41b7e, 0xbf592f28,
-	0xd5182b41, 0x96e95fdd, 0xd579d6be, 0x980d4d0e, 0x53d3a3ca, 0x47798c55,
-	0x184be774, 0xbf4037f3, 0xb36b094c, 0xff7f7746, 0x96322580, 0xcccbfd8c,
-	0x1feee8eb, 0x43df4920, 0x013fc16f, 0x6e3da15e, 0xb781ab82, 0xdbfc3ac5,
-	0xb3b78ddb, 0xd2a3c0ba, 0xdfee6d99, 0x3c401f48, 0x106a7cc0, 0x11ae904e,
-	0x644cf3f3, 0xdfe81493, 0xc4ba67e3, 0x918f5f7a, 0x9f2ca8d6, 0x420b58c1,
-	0x78cafda3, 0x116c6bc8, 0x93f631f3, 0xa9fed915, 0x059fbf90, 0x57bce2e6,
-	0xc4228148, 0x690d6313, 0x24abbf48, 0xffd71b36, 0x94349c03, 0xf407eaaf,
-	0x99af7009, 0x9649bd96, 0x3093dcc4, 0xbdc4f05f, 0x214fd4e9, 0x3f42a3f5,
-	0x8fdfcf43, 0xe9639b9e, 0x322dcf47, 0x7ea4a9fa, 0x4fd6179c, 0xeb04ee4d,
-	0x8c4b727c, 0x7ea4ee7e, 0x2eb617dc, 0xd6898afd, 0x46515cf9, 0xf54e24fd,
-	0x97d400b1, 0x2d607a0d, 0x5dca197e, 0xef6389f5, 0x98ba6665, 0xdff912bc,
-	0xa6625c0d, 0x389c848b, 0xfa261d0b, 0xd0f258fb, 0x5bec7e93, 0x44830f22,
-	0x5f1a3512, 0x5c91afeb, 0x41dfd498, 0xbbfa3bf9, 0x31dc2e48, 0x0eb17021,
-	0x59b1c0f3, 0x816bc83f, 0xe831eb6f, 0xb129e61a, 0x36bd4c34, 0xefcba34c,
-	0x261c3956, 0x88dbf80f, 0x683ed023, 0x08911ceb, 0xa4d2f5f9, 0x365c205f,
-	0x27c11b33, 0x5895664e, 0x48cece2f, 0x9e9ddd3e, 0x826429bd, 0x8041ead3,
-	0xdfbba97f, 0x0d206ad5, 0xbb2b6be9, 0xb6f48421, 0xa7ac106a, 0x854f633f,
-	0x14848fae, 0x20a83f68, 0xd769e10d, 0xe3cdbf80, 0x28fe306b, 0x1c19ff1a,
-	0x3f8e0777, 0xf6f8e7ae, 0xf1963921, 0x2c8b831d, 0x18343be3, 0x177de81f,
-	0x0f8c55bb, 0xd8c09bf0, 0x685ba1f3, 0x22e0fb7c, 0x8d6eff1a, 0x8fc65915,
-	0x05ff1aeb, 0xdea5f71c, 0x82643fd6, 0x4b83fd75, 0xf8d7ebac, 0x0b655ffa,
-	0xb471f8c5, 0x16875ffe, 0x2e0ff5f0, 0xf3b7ebe1, 0xf7c6bb7e, 0x75ffc174,
-	0xdeadf71c, 0xa2743fd6, 0x9517fd75, 0xe76fd759, 0xcacbbfe3, 0x1a2ef8c5,
-	0x1950bdff, 0x6545ff5f, 0x0f66be34, 0xb48e90f8, 0x61957101, 0x040d9f18,
-	0x19254886, 0x6474a7e5, 0xfda0c61f, 0xe084363a, 0xa71c4770, 0x80e2cfbb,
-	0xf2dd5cde, 0xa381858e, 0x08559e40, 0x9fad2f9a, 0xa59ca1a4, 0x0b7b9072,
-	0x341754c5, 0xb0dfb4c9, 0x70f0f675, 0x937b6f98, 0x82fcc21c, 0x65879775,
-	0xbcd8efda, 0xb0a76c3c, 0xf0ff7e08, 0xcd1bd1a1, 0x174e8aeb, 0x5ac7a8d6,
-	0xe7c47c2d, 0x46cc9a13, 0xa6fcc256, 0xeb8c1121, 0x39031fce, 0xbe7e40ca,
-	0xd314720f, 0x078c2ae3, 0x9c828fdf, 0x6f999a65, 0x3c7df196, 0x991cdec4,
-	0xff827282, 0xbc38531d, 0xc2912d8f, 0xd6cfff08, 0x3e50d22e, 0x0789ac2d,
-	0x23cf77a0, 0xb9d4f028, 0x28de1ecb, 0x08bd3c11, 0x15891b9f, 0xa033fb19,
-	0xb6801fb5, 0xa5afb6b0, 0xbc2c2ddd, 0xcfea0d32, 0x483f935f, 0x3cdff587,
-	0xc6563edb, 0x07f983fd, 0xd98f88d8, 0x630e5b00, 0xaad71bb3, 0xe3732003,
-	0x56fdf56c, 0x0139fb53, 0x22e6fe6b, 0x0d5dbe6b, 0x37d436ab, 0x01b6258a,
-	0xd2b5bdfa, 0x938c6e5a, 0x78e1f528, 0x20fde315, 0x56f7cf85, 0x67e2c74c,
-	0x573af09d, 0xf98d6de7, 0x5952ef04, 0xd6cbf684, 0x4ff84664, 0x9d017aa6,
-	0xbe7a3baf, 0x3f875573, 0xf733e60f, 0x19e0994e, 0xbdd6ff3d, 0x18db7ef1,
-	0x563f6b48, 0xd7a30491, 0x79ff3d13, 0xa3d7a34b, 0x1f961e93, 0xe9cefe8a,
-	0x829e9a24, 0x1efa934d, 0x6f2bd535, 0x51efb2b8, 0x6e957d13, 0x17c96599,
-	0xea58e787, 0x5be6d617, 0x14d617ca, 0xafe7ca5b, 0xe7c9645e, 0xd4b4ee87,
-	0x9974b79f, 0xcad6fca5, 0x37e52c7b, 0xe4b5ad17, 0xb11e04e7, 0xf671bfd4,
-	0x6db94b06, 0x20d725ef, 0x25bf551f, 0x3e37dc33, 0x007b1d75, 0x5d4fc1f5,
-	0x71f10f8a, 0xf88d2aa2, 0x979554e0, 0x4ca6f6d2, 0xc1cb8047, 0x16715402,
-	0xad086b2e, 0x9972889e, 0x5e2cfc91, 0x1a1433b6, 0xe4adda08, 0xb5c9f825,
-	0x09008b1a, 0x174fac4b, 0xa6ca771d, 0x94f3d6f2, 0x67a302d7, 0x5b972cf6,
-	0x6e0f7f63, 0xe508bfcc, 0x00f26f4e, 0x3ee006fe, 0xf7f621d7, 0x8932f2e8,
-	0x33bf99e5, 0xfcf89cb6, 0x65b3909c, 0x6507971a, 0xcc9bf6cf, 0x8c8f983c,
-	0xf1aafca8, 0x28a8001a, 0x4f3b5127, 0x2e007a46, 0x50cbd0b0, 0xedb77f0b,
-	0x155e6993, 0xa3c61328, 0x235bc9c8, 0x1c899ca1, 0x68dd7c18, 0x7eff879c,
-	0x29aef909, 0xb6f5f699, 0x8f7de9aa, 0x3c9f882a, 0xcd544f4a, 0x5558f4a6,
-	0x55a3d280, 0x5fbe9445, 0x6b694955, 0x0f4a52d5, 0xfd288557, 0x4a6ad553,
-	0xa1aaabdf, 0x5aaa9df4, 0x1550ff4a, 0xcabdb4a6, 0x0fc1a94f, 0x4937f25d,
-	0xaec2abe8, 0xf2879d80, 0x565ac567, 0xe216dd40, 0xf21a5f73, 0x67d759f9,
-	0x3f1f5023, 0xa19d8efb, 0xbc1bdfbe, 0x77ade9a2, 0x5f49fa3c, 0xfe030829,
-	0x3b967b33, 0x9c9e38e3, 0x819d3636, 0xf867ba3c, 0x46dbbe13, 0x92415e51,
-	0x37c90d81, 0xdfa31dcb, 0x75f08c61, 0x7f313c3e, 0x016b98e7, 0xfd1ec71f,
-	0x7bf6366b, 0x717fec4e, 0x87da6407, 0x0f936459, 0x1b8265f1, 0x3b9d6bed,
-	0x0f3fbc84, 0x82ea3efc, 0x0660cb5f, 0x274904e9, 0x68db3bfa, 0xb1c20a67,
-	0xc40c3e39, 0xdc1ececf, 0x5c7e41e4, 0x8fd3669c, 0x918380c6, 0xeba43796,
-	0xd3fef32e, 0xad9fcd64, 0x9037a691, 0x5c26f63c, 0x4ae91a3f, 0x430e8fd7,
-	0x6a51a7fc, 0x4d38b3f4, 0xbf028fd3, 0x3432da9e, 0x61dfef81, 0x27d60fbe,
-	0x5d82bd12, 0xd5fff548, 0x1fade9f3, 0x358c3e63, 0x281c0fb2, 0xe86ca00f,
-	0x1e9dedf9, 0xd13e5778, 0xcd5f10f2, 0x2fa867ea, 0x5fffc1c4, 0x157ec10e,
-	0x06fd1bca, 0xfd90e41b, 0xdebdf8db, 0xf3b41e32, 0xb637361a, 0x156e9deb,
-	0x2ba0cc76, 0x1a1a5790, 0x3a2764cb, 0x92beeb75, 0x9b07c968, 0x7d96e9fa,
-	0xfc01ff06, 0x4152820f, 0x541329ba, 0x56b8a1d4, 0x23bf304b, 0x2f013f28,
-	0x2bd78941, 0x016ab477, 0x0b63912f, 0xe5b719ea, 0xbde77418, 0xef208ff1,
-	0x6546fe4f, 0xdff962f7, 0xae505660, 0xf720c51a, 0x2f9f906c, 0x9635b772,
-	0x77b940ce, 0xf9f7c6d2, 0x83cf2c05, 0xab114f46, 0xe73d46c9, 0x8e9b6623,
-	0xfb11fff4, 0x64d3279d, 0x1a6cf86f, 0x6afe73ad, 0xfa0b3eeb, 0x585f2599,
-	0xb017cd6b, 0xde90536b, 0x2ca9d60b, 0x5a5f212c, 0x9d36bdcb, 0x95642dfa,
-	0x41dec8ab, 0xbdc6057b, 0x00ca674d, 0x73f95f98, 0x43e7658f, 0xae363bfe,
-	0x7bf61ba7, 0xff3e1f71, 0xe6b0a492, 0x1a0ff287, 0x19707f33, 0x55e1f6c3,
-	0x6e42a728, 0x7accdbe6, 0xceebefe2, 0xc6be7a3f, 0x8fc3d27e, 0x6f21e620,
-	0x18e1fc91, 0x9b34da76, 0x10adf424, 0xbae037a5, 0xbe6b7a4d, 0x2f918380,
-	0x19dfca8f, 0xe9a7ff95, 0xe859892d, 0xc81488ed, 0xfa7325b7, 0x52417d42,
-	0x37c0b53a, 0x47ad3fe9, 0xd2ffe5ff, 0xff4207fe, 0xeffe96d9, 0x3ff697fc,
-	0x57fcc7ac, 0xfcbfeac6, 0x433b6db9, 0x9e4a6f20, 0x60c3c879, 0xd4a93a1f,
-	0xef00f8a4, 0x7a579b65, 0x284e0e90, 0xf3d20f21, 0x3d3cb0c9, 0x46ec3d16,
-	0xa23f207a, 0x5da125df, 0xfe84ff85, 0xdf753d4f, 0x3e67dc4c, 0x64eaacdb,
-	0x47b16d2f, 0x15afc0ec, 0xd833c58d, 0xe11fca18, 0xc8cfbbf9, 0xd2b26f98,
-	0x0f93c967, 0x0dffa0a5, 0x13d84528, 0x2a97d211, 0xc5cc3eea, 0x3ac8287d,
-	0xdba2cf89, 0xfae7f8e1, 0xd7cc7c90, 0xc3967a12, 0x0fcf493c, 0x1b04b80a,
-	0xa3233bef, 0x72b593ef, 0xfd54683f, 0xd4ffa122, 0xc749dcdb, 0xdf6274c0,
-	0x7941df61, 0x8583c069, 0xbd53feb9, 0x4731e1f5, 0x756d3e60, 0x2648f1bf,
-	0x767c1938, 0x2ffe61b6, 0x2ef6f79e, 0x9d85db8f, 0x4c2eddd7, 0x424dbced,
-	0x69e66b6f, 0xa0f11a99, 0x41b65c5e, 0x73e085f5, 0x4f4db6d9, 0xea768a3c,
-	0x70df76bb, 0xdb74bfe8, 0x00987f4b, 0x6aedd2f9, 0x0cbe0cd2, 0x8dd29497,
-	0xbffc2097, 0x1e376c74, 0x92f57e4a, 0xbfcd1de6, 0x374fb8ff, 0xefb74a3e,
-	0x9ee8d8d3, 0xb0d298f0, 0xc5756b4f, 0x91c34bc0, 0xaaafd45c, 0xa1ae7eb7,
-	0xaf72793d, 0x63d352c4, 0x4bc373c0, 0x9c2027a4, 0x4f028f08, 0xaa8b785d,
-	0xa0bc041f, 0x14f0373c, 0x9080fe5d, 0x779fd83f, 0xd3f3d114, 0xf95fa3cf,
-	0xd70fbb3d, 0xedf4f45f, 0x71c75c1e, 0xf5d392a5, 0xfc532b63, 0x1a916e30,
-	0xe529d14a, 0xff1e8bdf, 0xe15bd121, 0xe14c3f1b, 0x9fbfa0f6, 0x50a6f68d,
-	0xc2df5c3f, 0xfad037f5, 0xe880580a, 0x3931e8ae, 0xa7e90c2f, 0x3dbe9b0a,
-	0xc8645f06, 0x6f8e2f9c, 0xd60b8504, 0x12ed1c77, 0x4efeb3f4, 0x7f266f0e,
-	0xfc8622c8, 0x3fc343ff, 0xfe5316ce, 0x93c70753, 0xbe09b643, 0x4ccf6d02,
-	0xb77775af, 0x0d4e7e20, 0x1fa2a7f2, 0x9094c82d, 0x25f48780, 0x31bf2bf4,
-	0x87e3952d, 0xd16c9579, 0x2980f40e, 0xb7eb1df8, 0x18e77ea8, 0x65f63b4b,
-	0x4bf8f77a, 0xef30f8c4, 0x8fbfdc38, 0x86a2b0a7, 0x55bbeb18, 0xf61ef836,
-	0x997d1371, 0x7bf39bf8, 0xbf9c3ddd, 0xcf0f7e0d, 0x9fe58e9a, 0x07f9c9bc,
-	0x08fee1db, 0x52a48af3, 0x25ebbef9, 0x16760792, 0x75d7c589, 0x6b6be0aa,
-	0x302741b9, 0x304a456f, 0xdff60bd1, 0xfe4fe087, 0xd07582b3, 0x832f24ce,
-	0x67a79e38, 0x16df067f, 0x251ffe0a, 0xad9ff95b, 0xbbdf7ce7, 0x7da2157e,
-	0x3f0d4cae, 0x2bf228f1, 0x8bc867f0, 0xe1e6aafc, 0x1fd74fba, 0xc04dc3f8,
-	0x0c1ba7a7, 0xcfcab53e, 0x7a2d3e68, 0xf484b376, 0xa7a7cd19, 0x891b408b,
-	0x3df0a7c5, 0xb5169f26, 0x9f953ffe, 0x8faefc06, 0x0f219f82, 0xb463837b,
-	0xf3633c3c, 0xe5a33c12, 0xc9bdfc21, 0x9fd27bb2, 0xbd067741, 0xfcb2fc95,
-	0x1817f222, 0x5dd06974, 0x741a5d17, 0x62ffc3d7, 0xf9745f81, 0xa005a460,
-	0x2a5dbc93, 0xcd6555d9, 0xda0c3cfc, 0x8b203cbd, 0x6da7e4e0, 0x3cbcd58c,
-	0x0f9cc920, 0xa21be547, 0xf2a3fbea, 0x03f55179, 0x4b4af951, 0x03a6b2fd,
-	0x47fc231a, 0x4becf52c, 0xc41f651f, 0xfd8c87b0, 0x4678d826, 0x0c5d210b,
-	0xde50d4ec, 0x0541cba9, 0x1ee0ff45, 0x0ec5ec99, 0x182af180, 0x3d3ea3a7,
-	0xb1b9021c, 0xf0edc9d2, 0xd3d3bd0e, 0x8995d207, 0xac99df3c, 0x67b942ad,
-	0x7274ef7c, 0x5e47473f, 0xe4d127a7, 0x2cd238a7, 0x0d6edc93, 0xfcb1e9b3,
-	0x10a3b020, 0x6f595bde, 0x39ffdce5, 0x5e0d764d, 0x8d68f68a, 0x771343ec,
-	0x3d1bb2c1, 0x68e92ae8, 0x6ccd7a1e, 0x55f0bef8, 0x3a558e99, 0x70633ce2,
-	0x57e42c5e, 0x89ec99fa, 0xb3f42c13, 0x6ccfe889, 0x82c576e6, 0x08fa5135,
-	0x54f4435b, 0xa1a25ae0, 0xe03b053c, 0x973fab7d, 0xe88945f3, 0xb5bd68af,
-	0x278f68dc, 0x95df685a, 0x03cb59d4, 0x65da3ec2, 0xcb0649f0, 0x86833920,
-	0x42e7da0f, 0x47934f2e, 0xf01b335d, 0x665071d1, 0xb6799e78, 0x9c7c2659,
-	0x97e7e7ad, 0xfc4c942c, 0x493ac156, 0x6a701a1e, 0x7ad27e43, 0x3b6d5797,
-	0x177d9cfe, 0x3fcecdd2, 0xa439f98e, 0x1ddf3b6d, 0xcff31bb1, 0x8ff83dbd,
-	0x29fd67ac, 0x37e49d7b, 0x26ebd8ee, 0xf3d8ef7a, 0x6177c1db, 0xfc9d977e,
-	0x3f7b1d75, 0xd7f4831f, 0x845edcb1, 0x1063aef2, 0xf7aa87b7, 0x95a63e7c,
-	0x8415d7f6, 0xc6b2a3b7, 0xbfe6a3f5, 0x3092961e, 0xdea15585, 0xf89e37b0,
-	0x93bcf829, 0x7b1d0bfc, 0xb80ecf3e, 0xa9eb75fe, 0x1d39e710, 0x59fb366e,
-	0xf7225f9c, 0x8f770783, 0xcf0cb4df, 0x69f71ba3, 0xca7ca1f3, 0x831f7f0b,
-	0x59e3b472, 0xabb50fae, 0x79e38fad, 0xe1fc8745, 0xdce01532, 0x9fd54c8e,
-	0x1194fbb1, 0x62a34393, 0xe4efe5c1, 0x7850b937, 0x4fb70a68, 0x21e1fdff,
-	0x73bcb9f9, 0xae121d87, 0x7fc38bfb, 0xd7b0b944, 0xac69744e, 0x32c374f7,
-	0xb7ce57d2, 0x7fcae1ee, 0xd0b83a17, 0x0b914b75, 0x7fd4f759, 0x5aff7c73,
-	0xa2fcd2f6, 0x9d27a0f9, 0xf283b9ef, 0x9a3edcdb, 0xfbd205ef, 0x7869ff82,
-	0xeef0167f, 0xabbaff39, 0xddd7cdff, 0x9d5fde3b, 0xe3aef02b, 0x85f07f79,
-	0xbefcd3bf, 0xf4db9cae, 0x0dee94df, 0x9b15febd, 0xa80ccdf7, 0xb8d59d3f,
-	0xb2b8b150, 0x19abff7c, 0xc0cafa50, 0xdf388903, 0x37e751c9, 0xc2a6fa46,
-	0x92c9a6ed, 0x9641ec8d, 0x907b0928, 0x840351db, 0x496030fe, 0x0321e901,
-	0xf5cfde06, 0x0ebbc506, 0x195f1fcf, 0xb147df3c, 0x3bec6c14, 0x97ebcc01,
-	0x9ed5bc8b, 0xfcc4b9fc, 0x603a3478, 0xa20ff7f0, 0xa0703b5e, 0xa42f7a4c,
-	0xe8beefa4, 0x97bfce99, 0xe7bb1669, 0x0ed5af4a, 0xdab24dca, 0x7f45534b,
-	0xff9f18d3, 0x0e149734, 0x0f261c03, 0xfa1269fa, 0x570f2747, 0x5cf90499,
-	0xf6815816, 0xb59754c5, 0xc33c06bf, 0xe1cdf719, 0x380d5768, 0x8797590e,
-	0x93241c70, 0x70bcf49f, 0xdc1379c4, 0x2f18c232, 0x871f14c3, 0x1f729f63,
-	0xbd859df9, 0x904d474d, 0x5aab5c57, 0xb4159f90, 0xc81c3997, 0xe5ec36ce,
-	0x84cde0de, 0x2188adfd, 0x032bf80d, 0xdad3bf65, 0x06dfd91f, 0x3e2ebe5e,
-	0x537e3c0c, 0x851bbcbc, 0x45ae8197, 0x74ebf20a, 0x62fa17b4, 0x1f9e0cfd,
-	0xdce85218, 0x570bd84d, 0xa4291778, 0x50cc0cf7, 0x8e855f10, 0x1cf0aba6,
-	0x6893e1c4, 0xd9b7171e, 0x64707f68, 0x91f70449, 0xdfe50ab5, 0x10e3e9b0,
-	0x7b2f33df, 0x0c9df4ee, 0x8d7ee6fd, 0xf1e53dc7, 0x7dbf8ff3, 0x8c44e5f9,
-	0x2c781417, 0x46afff84, 0x167aff3f, 0x2d380389, 0xa1285854, 0x25bdfa0f,
-	0xefc5bef6, 0xdfe3cd6d, 0xfbba5377, 0xdefd5f39, 0x3abfcae4, 0xd8e40e7d,
-	0x5df300fb, 0xe1a30e98, 0xfd5db315, 0xaf0e669d, 0x1e1621e0, 0xe42ae3c2,
-	0xe139d33c, 0x9ffe821d, 0x99b3d3fb, 0xea4ed768, 0xe5c09518, 0x17b230eb,
-	0x385ec282, 0x3e09bccb, 0xa1d7ca17, 0x79fe7409, 0x8ac77650, 0xec2adc2b,
-	0x7c625fed, 0x751da409, 0xfb4646ac, 0x1f92758d, 0x60e75437, 0xb7c4639b,
-	0x9f86abe4, 0xfe0de04a, 0x8f3c6ce4, 0x842fe3e1, 0xbc6609a6, 0xa938cdb5,
-	0x0789e98c, 0x74df7bfc, 0xe14df51e, 0xc23df68b, 0x35b3ab77, 0xfc862f37,
-	0x6fc05db8, 0xc82ffee6, 0xf36979ff, 0xefd21b06, 0xcb3675a5, 0x2aa96af9,
-	0x6cb1b1ec, 0xe66bce2c, 0x0b3ba77e, 0xf65072f1, 0xb0673c61, 0x88168cf9,
-	0x0d182e71, 0xfd1fec4f, 0x9d555be9, 0xdab76bf8, 0xbae11f30, 0x430723fb,
-	0x56977a3b, 0x9e6b1a53, 0x9e7cec03, 0xedc3590b, 0xfdffd263, 0xc3a93be0,
-	0xf68c9915, 0x7e131d67, 0x63fa688f, 0xb767c744, 0xafee30b0, 0x5ca2af68,
-	0x68cf5b38, 0xdc90077f, 0xf037768f, 0x7eccf7fb, 0xb69b8b9c, 0x82f512ff,
-	0xc749668a, 0xa50a8623, 0x6d3f4355, 0xc65129b0, 0x6bc3387d, 0xa3eabbc4,
-	0xc5f137af, 0xf8215556, 0xfbb0981e, 0xe3f71c66, 0x9ea18d36, 0xd3b17fe2,
-	0xc7f8fb83, 0x07c499cd, 0x57ebadbd, 0xa9aaec55, 0x972a3748, 0x30f4d187,
-	0x92ce3eaa, 0xf40e4cbf, 0x699afe47, 0x8be25d6f, 0x6befbf81, 0xbc173892,
-	0xfe16f940, 0xbdbe4cff, 0x80b7c869, 0xa3e2679c, 0xf90f5abe, 0xbe4b1a96,
-	0xa9bc962d, 0x7bc5f708, 0x5e22a686, 0x26aabf17, 0xdb6f92c7, 0xe739f8aa,
-	0xb94e2233, 0xdbe411a3, 0xadf24db7, 0x8c5be411, 0x5fbf9078, 0xff0b7ca8,
-	0x36dff0d7, 0xd6316f94, 0xf9566bab, 0x08f9a636, 0x8d31b7c9, 0xaf3c4b36,
-	0x7c9f3b5d, 0x47af9293, 0xeaa0f8fd, 0x3f418f8b, 0xfe3e84db, 0xc44b888c,
-	0xe5ce5071, 0x7f8d3a6a, 0xe2ee72a1, 0xff73950b, 0xe4367045, 0x8c1de2dc,
-	0xd27b9ce2, 0x8b739721, 0x939c8177, 0x9cb91e90, 0x7187bc5b, 0x7c945cbf,
-	0xbe43d91b, 0x115faa31, 0x4d83ede1, 0x02df0fe9, 0xabf58dfd, 0x1fd4073e,
-	0xc6ef2ddb, 0xae5de599, 0x7adc10a6, 0x1783bbc8, 0x0876ef26, 0x6c720779,
-	0x68d7ca08, 0x5b35f0fa, 0x8f77c1e3, 0x2bff5e3f, 0xcadf97e4, 0x86f8de74,
-	0xbd0f9f8d, 0x1678fe36, 0x6263d7d2, 0xdc848b3e, 0x510aaf6b, 0xe45e53ff,
-	0xf1772beb, 0x468af138, 0xd4561fae, 0xfc2f614b, 0x17c27733, 0x78bfce1a,
-	0x2152c48f, 0xebcecb3f, 0xf38d27b3, 0xc3233632, 0x720b0f44, 0xbfcfc94a,
-	0xf40e6140, 0x72ba97e3, 0x5bfea24f, 0xfefdc39a, 0xf17be2a5, 0xd0abadab,
-	0x88fc5dff, 0x46a5e744, 0xe711ab7c, 0xa26e23db, 0x77f91979, 0x6627e3a3,
-	0x99a9b88a, 0x1bc294bf, 0x947fc462, 0x7fe6b16e, 0x966ff822, 0x62f04adc,
-	0xe331cbaf, 0x5d7a8c38, 0xe0283a70, 0x7ed32754, 0x802705da, 0x27bd379b,
-	0x33d3009c, 0xe1ba5232, 0x585bfc52, 0xebef566f, 0xbd16e035, 0x5d7fc36e,
-	0x0de9fa2a, 0x7b9c060e, 0x1dc05fac, 0x939202ec, 0xa758f0d1, 0x33b5f975,
-	0xe8094e31, 0xe84ce486, 0x181700d7, 0x70d26f2f, 0x47977dcb, 0xd664fd05,
-	0xe1829a4c, 0xae30b30c, 0x6a0bca1c, 0x0fdcbd17, 0x1dee31e0, 0x4edc58ef,
-	0x0f609b2f, 0x56ec39e0, 0x41c92767, 0x35db0e83, 0x141c07ae, 0xbfddddf0,
-	0xf9d93272, 0x7a8e924d, 0x24e23048, 0xae0106b8, 0xa828ff78, 0x8106fc70,
-	0x0eff911e, 0x8719f23c, 0x8bc91ee3, 0x635c9dfe, 0x40bc42bf, 0x8e66ccfd,
-	0x22586097, 0x4eb164bc, 0xa8a97f3a, 0x84117c95, 0x8206d35f, 0xe19f219f,
-	0x93c665cf, 0x58957e89, 0x4c954bf4, 0xa8a965fb, 0xf35ed337, 0x99e7a407,
-	0x036caa4f, 0xfbfe1b81, 0x4f3e7a2a, 0x9e34501c, 0xb6bc04da, 0x085d3c21,
-	0x77ae4eb7, 0xfba0be45, 0x50794650, 0x39e05909, 0x5f73d1e5, 0x0671af09,
-	0x518e90bc, 0xcbe735be, 0x92682f98, 0x9ef4df58, 0x50f3c5eb, 0xef17bf33,
-	0x7ffbc239, 0x18b1f24c, 0xba60beeb, 0x8b9e85ee, 0xbcf16e80, 0x8eba37a4,
-	0xd23b5386, 0xe9bab7f3, 0xe76735f9, 0xe7a44ca1, 0x43f7123d, 0xce5a2734,
-	0x1e763d35, 0x09d5b5f7, 0xeeeb0f74, 0x6df5557c, 0xcb90c6f4, 0x7ed1ee82,
-	0xbb37df30, 0xf1821704, 0x141c5ba2, 0x18f347ef, 0xb353f5c2, 0x64e6de7c,
-	0xf567d7c9, 0x2edbbfde, 0x37278cc5, 0x3f2323f4, 0xf8c3c71a, 0x6f1826f9,
-	0xd178f764, 0x2fe183fb, 0xfabadf38, 0xbad9bfdb, 0x6ebe718c, 0xb590543c,
-	0xb88d5e10, 0xe05223a8, 0x73ea2a47, 0xfc4b25d3, 0xc85ccc15, 0x7fdc6fad,
-	0x7bdc96aa, 0xa74d2cff, 0xebb774fb, 0xe89d77c6, 0xe2674f33, 0xdbe26f7c,
-	0xec7fefb8, 0x5998e7e7, 0x44d6f636, 0xab263fdc, 0xe3eae90c, 0xa1f92a43,
-	0xe3ca9e3f, 0xedf9af6e, 0x3e5d0501, 0x3898f0d7, 0x8938cd76, 0xb037acec,
-	0x87a8f1eb, 0x047f983b, 0xef132fc1, 0xd5d465ed, 0x5f02f14c, 0xae12dd8f,
-	0xa537d4c6, 0xc435e933, 0x219924db, 0x7dfc5ade, 0x7f20b8a7, 0x032c87fb,
-	0x1fa0a05d, 0x07b1fb50, 0x9bd63259, 0x33264fe0, 0x27e37c66, 0xf3075e6f,
-	0xf6487f18, 0xacdea179, 0x03172e03, 0x7ae47a7d, 0xe0980b1b, 0xab858135,
-	0xfe34dfd1, 0x9c3affa8, 0x3be81177, 0xa8a44f78, 0x07b54379, 0x6a25ebf3,
-	0x72050c1f, 0x6d9eb03d, 0xbf7267b5, 0xea017285, 0xf5c13761, 0x4eb05ebc,
-	0x728861f2, 0x8a5af341, 0x93a82a2f, 0xb6e142e8, 0xbc1cc4b0, 0xfa03b0df,
-	0xda1eb6dd, 0x05fee167, 0xbadfb1ed, 0x875e6f33, 0x49e60772, 0xb9f9ebed,
-	0xf3b4017c, 0x2dd4bf22, 0xd78afea2, 0xb3ef0c4b, 0x7df3d514, 0xea90e8a9,
-	0x7dc6f2c3, 0x3b7ed08f, 0x97ebc603, 0x6450fb8e, 0xca0bdd2a, 0x2fba7494,
-	0xf84c1a19, 0x7f1c60eb, 0xf220fa6c, 0xabbc520b, 0x98a0c097, 0x64fe63e3,
-	0xb3f2421f, 0xeb4cb7c0, 0x96bcfd0b, 0x236e9c93, 0xe7433aba, 0xde0147ed,
-	0x1bf78001, 0x40e55e22, 0xab5a07ce, 0xc2fc5f69, 0x9b9f943e, 0x38a24d34,
-	0x8f2c858e, 0x8e6638e2, 0xebe6fae7, 0xe8c33b97, 0xed5d7be7, 0x0fdf881c,
-	0xefa76e5c, 0x1cb8dbed, 0x4ad41f6e, 0xebe3f6fe, 0x58f78655, 0x24cbd7aa,
-	0xabd78e2f, 0x7e563f74, 0x1431c78c, 0xc7fae36e, 0xdfbcf581, 0xe1b7a8e3,
-	0x439607b9, 0x11ab70be, 0xb4e5c0e7, 0xe8167f61, 0x90c2fe3c, 0xdd62e5bb,
-	0x75a1f63d, 0xd92434cb, 0x2e5b7968, 0x8b0971e4, 0x2d1cbd90, 0x1cf1cb77,
-	0x197c83dd, 0xeae6271d, 0x0e9063b6, 0x5d105f22, 0x19521c57, 0x07d231da,
-	0x9714b96d, 0x73a247b6, 0x92cdf18b, 0x8a1ae31f, 0x4987b1de, 0xcfe70eff,
-	0x2fee11fb, 0x8619daef, 0x3c431f2c, 0xb1ca9c80, 0xa7e9fe77, 0x1be4fdf0,
-	0x02088c0e, 0xb827c9ba, 0x59be711b, 0x4f3c799b, 0x52eb1bd6, 0x9b2f3ef0,
-	0x40e497da, 0x02ccad61, 0x52713926, 0x13775ff2, 0xd4741fdf, 0x667c0c77,
-	0xb8053569, 0xc1cb7ebf, 0x66ef55f7, 0xd8646315, 0x043d84ef, 0xf51f81f6,
-	0x6b5de29b, 0x1d133453, 0x9b59ef14, 0x55f7c322, 0x1aa61e22, 0x576857f7,
-	0x8a71f1ac, 0x06fa4af7, 0x3f4638d3, 0x2edabf46, 0x1ee86ede, 0x7fd6f69e,
-	0xd68fce31, 0xf286a9f9, 0x1e9fba22, 0x4fd2f7e3, 0xadcfefce, 0x395e6093,
-	0xac14cbaf, 0x8cc1f39e, 0x1d73e6a1, 0xcafc3523, 0x98da6fd9, 0x9cbf04df,
-	0xbf31c53f, 0xe38ddf09, 0x7f01ef80, 0x61493757, 0x23f984a7, 0xe516795a,
-	0x0af3e475, 0x98ae7fe1, 0x1aebcfca, 0x8158de33, 0x4b233f7c, 0xa1607a22,
-	0x8937d680, 0xfa2f35f4, 0x78b30bfd, 0x8f6842fb, 0x08f8d8fc, 0x13904fe7,
-	0x1523945e, 0x52e6d7eb, 0x8bc93afd, 0xc86e37fd, 0x28a47d27, 0x5e546647,
-	0xa3f48477, 0x4923a6a2, 0xb7c0c7c8, 0xa81f50eb, 0x51d76898, 0x68fc1b8e,
-	0xe2ebf7f0, 0xe8732b3e, 0xc67ef1a3, 0x8be646ff, 0x21f2d7c1, 0xf583d72e,
-	0x39831f9c, 0xdf5f5f9c, 0x2f0ae2a6, 0x9f89bf84, 0xfce16f8f, 0x43763f2a,
-	0x2f87de2e, 0xc3efccdc, 0x453f581f, 0x78fa7d43, 0xa6fda258, 0xbd737f27,
-	0xabbf9a35, 0x7defbe25, 0xe0d2fd5d, 0xe18f836f, 0xaf1c6aef, 0xef14f80c,
-	0xf5f3464f, 0x0fe1b54c, 0xaf7cc3b7, 0x03d61a79, 0xddf29df3, 0x26ad3d3b,
-	0x14f90939, 0x3c2817cc, 0x2b90cb9e, 0xfb8f0ae5, 0x8bf3dafb, 0xb76c3f1a,
-	0x677e47fa, 0xebf1e44f, 0xfdd12a75, 0x07b3f8f9, 0x7f205d9f, 0x9d5f285e,
-	0xf18d3f8f, 0x7ed63de5, 0x2de8277e, 0x8076bfba, 0xfae0046b, 0x8a26fd4a,
-	0xa9e8fdf3, 0x3f113323, 0xce81bba5, 0xddeabe91, 0x4e72822c, 0x557ed309,
-	0x3dd328d2, 0xb244a601, 0xf99b73af, 0x956dc798, 0x7a26e33e, 0x1ed6792a,
-	0x4bed019e, 0x86307e76, 0x779668e2, 0xe85a5c52, 0x872fa129, 0x1f20c75a,
-	0x7e3c2894, 0x042e5a2c, 0xd70fdc1c, 0x367e2bb6, 0xc2da4fae, 0x69288fdf,
-	0x9bb551b8, 0x746e25ce, 0x3a3d46a8, 0x1d010dd7, 0x9c5dfde3, 0x02ddf99f,
-	0x6dac6e23, 0x2513972b, 0x81d92a4d, 0xb7b65b25, 0xc970fc63, 0x77f2763b,
-	0xa19cb705, 0x9e5310fb, 0x94fe46d9, 0x396c9360, 0xb711eb7f, 0xd88e45b9,
-	0xb1b0ee31, 0x211dce9c, 0x0df2847f, 0xcf97e3b1, 0xfa585f17, 0x219d9ecc,
-	0xafe96100, 0x7ca0f49e, 0xd9b2d539, 0x7e877083, 0xba6e32bf, 0xc3669c47,
-	0xa7195f3d, 0x01ff0a79, 0x438f738c, 0x9c4635d8, 0xa4be96eb, 0xb2fcc247,
-	0x739c62f3, 0xdbe5e974, 0xef1c7d3e, 0x7b3db411, 0x6f9c71fa, 0x7e3e3fd9,
-	0xd8c1e31c, 0x77ed275e, 0xa2dea7c1, 0xdda36c38, 0xb5dfb126, 0xe2927d6f,
-	0xb5dfdbd7, 0xf6b7b0fb, 0x6307c73d, 0xf6fb603c, 0x6fd0522f, 0x34cf64b9,
-	0xd92eebf2, 0xc5952531, 0x148c2fd8, 0x017c36e9, 0xf8d1f3f1, 0x8078d03a,
-	0x023ed6e2, 0xebfca37c, 0x286dbb8a, 0x5ecc71e7, 0x1f5b6f11, 0x8f429efb,
-	0xebc6daf8, 0xe51cb9ae, 0x1fd7237e, 0xfb671bcf, 0xdbf1e026, 0x7abf8017,
-	0x1b102fc3, 0x3fe11f7f, 0xa2fb4f00, 0xe369f7f0, 0x8a3c5fc2, 0x7b7d8d65,
-	0x5c8db38d, 0x7b8cdc00, 0xfc380f10, 0x88c91c87, 0x5c525fe7, 0x866de233,
-	0x4f9ff717, 0x91fde307, 0x5ce76a13, 0xc7b85fba, 0x68bc63ae, 0x89b79ec9,
-	0xbc77da7f, 0x26687e41, 0xb3b423ee, 0x3f1e3fae, 0xd675892e, 0xae7c79b9,
-	0xefc63f80, 0x5df43d7a, 0x3a72e9c4, 0x7b77e236, 0x9d95db8b, 0xee36cf5c,
-	0xfdd79467, 0x76c3c451, 0x41ca4be3, 0xcaf91d3c, 0x0e036878, 0xddc390ba,
-	0xe3b1e871, 0x2beebba3, 0xfe217c08, 0x8aea1f70, 0xc0fc8733, 0x7a37e4b1,
-	0x0790c59b, 0xfc781bed, 0xfb1abb7a, 0x9711b05e, 0x3e688ffe, 0x3c585f0d,
-	0xffe6f9fa, 0x81d3e175, 0x4f724fca, 0x2dfdb538, 0x774f1cb6, 0x9eecdf4a,
-	0x7d149961, 0x1cebca6f, 0x473b7187, 0xbb83b434, 0xdeb16cec, 0x6f57e136,
-	0x78a64a7b, 0x070d55e5, 0xcb478e48, 0x2f7c0a8b, 0x337cc625, 0x9a2b7cc5,
-	0xf6d13ef8, 0x82ec3bac, 0xeff6da7e, 0xa8ae7a22, 0xd2f1423f, 0x95f96f2f,
-	0x8b8a6ad6, 0x6c227dc0, 0xd3db7f9a, 0xdc90c6fb, 0x44b2ef16, 0x8c49338f,
-	0x3d8e6c13, 0x8cfeb04e, 0x50d29c65, 0xcebba683, 0xc529de3f, 0x77f6237f,
-	0x83eb85aa, 0xe9e41aa7, 0x0fe318e1, 0x77d6aa73, 0xa4bf60a1, 0xfcdc67f7,
-	0x13d919bd, 0x12e5fa47, 0x093bce77, 0x146a9849, 0x4cbd55af, 0x87fd77c4,
-	0x5df10d2f, 0xe18abeed, 0x7c22577c, 0x551e7e4d, 0x4bd4300f, 0x2cbcb4d5,
-	0xcb442bf4, 0xc6c92d1b, 0x2ffc26c2, 0xf54f4f71, 0x644779d2, 0x70f3e220,
-	0xfb1571c6, 0x9f944bfd, 0x5b0a2fea, 0xfbf30a95, 0x2df2484b, 0xdfd97e83,
-	0xe794183e, 0x977fd9ee, 0xd963f11e, 0xb0aa57e2, 0xbb461e77, 0xa4e0bd84,
-	0xaf7906f8, 0x08f9de93, 0xf5a4ee3e, 0xf9f1d81e, 0xff5fa413, 0xb9f8cec2,
-	0x202f580f, 0xde750aaf, 0x9f1df1c7, 0xd457fe3f, 0x8c31b19f, 0xd438f85f,
-	0x3ea1bb47, 0x8e9cec9e, 0xa0c61367, 0x85f0a45f, 0x3ca266bb, 0xf4e78c2b,
-	0x6a4cf858, 0x3bfa1ab8, 0xc7f3cc96, 0x77a20db6, 0x759f4a25, 0x81e8dc53,
-	0xe055cf1d, 0x4cfed4be, 0xa97dc33c, 0xe7a105fd, 0x53bc52ff, 0xcd7aab55,
-	0x4cc5e3f1, 0xf3ef9af1, 0x12de6294, 0x2fc8c4af, 0xfe847c41, 0xba04a6aa,
-	0xaffa0407, 0xd48f9fa5, 0x447c3bce, 0xfcfea1c7, 0x3fa453fe, 0x7ae883ca,
-	0xcebdf946, 0x395ee221, 0xd77573b4, 0x059d6a0f, 0x9fd35f3c, 0xaa1693cb,
-	0xf853b0ff, 0xcf79458f, 0x87fd797e, 0xeeeefc84, 0x10afb787, 0xd344d0ef,
-	0x6fd146ef, 0x5fbf96e9, 0x959deb1c, 0xefa7f318, 0xc858943f, 0x76ca7a86,
-	0x857fbd27, 0x7de028ef, 0x3f1a9d85, 0x44f32ad7, 0xdd9b9de8, 0xc5971e42,
-	0x9ddde845, 0x581e62fe, 0xd1ccf31f, 0x9fbd34fa, 0x61939cf6, 0x0bf9595c,
-	0xbbe23f6e, 0xc7e7e77c, 0x71859e7e, 0x1714f189, 0xffc2fe5f, 0xb7283a22,
-	0x3f22e647, 0xb3b76e74, 0xdbe7c88d, 0xfc8c1d5f, 0x0646a6da, 0xf38af9f7,
-	0xbb06f2ba, 0x58bffef5, 0xdaaaa9c7, 0xbbbef0cb, 0xa4b6af71, 0x57f33917,
-	0x5fa3d727, 0x725ffa71, 0xdf5bbf12, 0x35553a73, 0x59df133b, 0x3897ea30,
-	0x77c5cb62, 0x137c5e51, 0x71eaee39, 0x9c5df53f, 0x25ac47cf, 0x153efd05,
-	0x3ca377a0, 0x3e92d92f, 0xfb04fd10, 0x043bc69d, 0x8fdc04de, 0xb25eabf6,
-	0xef3531a7, 0x7caa2733, 0xf430ca99, 0x54cc8cdf, 0x1b1d1d60, 0x67f414ce,
-	0x9cea4718, 0x9dee4b1d, 0x3ad3c676, 0x98f61c4a, 0x09cf9df7, 0x8d0f7aba,
-	0x1e3e64fe, 0xee3187f2, 0x724c357e, 0x2f388ef8, 0xbb012bd5, 0x6e97bf08,
-	0x79699399, 0xa1a9457f, 0x04a7c07a, 0x4eb662cf, 0x6fc932cb, 0xa5e2bc63,
-	0x264a9959, 0x4ffe577e, 0xddcabd17, 0x24a16678, 0x01150bd2, 0x9faeb663,
-	0xa2887ee5, 0x7e1039e6, 0x15d3cb1a, 0x86a54919, 0x358e3df8, 0x7502ea50,
-	0x5653bf8b, 0x9e4e50c9, 0xe8f6e710, 0x1bb4c2ef, 0xdc92775e, 0x6c620d0f,
-	0x07be3a78, 0x4dd04de1, 0x10f153f0, 0x5763e61e, 0x1797192a, 0x93b47433,
-	0x7d8050a5, 0x5d54f409, 0xe9133d35, 0x18fcfe11, 0x07a64907, 0xbfa3cfcc,
-	0x41ea05fc, 0x3dfca740, 0x70b2efbf, 0xc3188035, 0x3aafc981, 0xe877f199,
-	0xccc3bf56, 0x71a5c6f6, 0x68e77892, 0x1731c91f, 0x84ebfeeb, 0x94558a3c,
-	0xff09d5b7, 0x4473c1c8, 0xa822ce97, 0x58bbc617, 0xd7521e24, 0x9994e528,
-	0x90593dff, 0x3ea9d137, 0xcd1e5ad1, 0xa2d72017, 0xf8206dc6, 0x449fbf41,
-	0x5449fbf5, 0x557c9fbf, 0x829c06bf, 0x7c3e8d8e, 0x556562a7, 0x1f1b809e,
-	0x06e021cf, 0xef8919f0, 0x9c5b31e8, 0x13879c4f, 0x6cc4e35c, 0xf01f58ec,
-	0x4e971e5a, 0x612fb978, 0x41c6276f, 0x865aa4b3, 0x890aef76, 0x97f0d3ef,
-	0x63b532e7, 0xf0f883ba, 0xb94e311e, 0xc30af380, 0xbea3d53f, 0x1eaff493,
-	0xd5bd9df5, 0xdf5d8b8f, 0xe27cdbdd, 0xb127cf63, 0xe26bfe97, 0x75fff663,
-	0x0bc552e5, 0xe786bf6f, 0x49f25db6, 0xf55bd007, 0xd438f2cc, 0xfd8f1333,
-	0x70be95a3, 0xd031d33d, 0xa438ef8a, 0xb8b7a06f, 0xd1efd661, 0x7d1bd274,
-	0x40758be5, 0xe00fd5de, 0x7f189370, 0xf73f1d6a, 0xf70965be, 0xe87981d3,
-	0x8b37fac7, 0x0a3937fa, 0xc470dfc9, 0xbabfdfc6, 0x91eb96a5, 0xa658fcb7,
-	0xef1ee9f3, 0x803fe151, 0x2a5d6edf, 0xb1e92385, 0x7562d7de, 0x9e6e3f78,
-	0xbdfa3f18, 0xe6f300aa, 0xbd6396ae, 0xd2e9c557, 0xfd1757b8, 0x9602c54e,
-	0xb321de27, 0xd4eb3f7e, 0xcd67e4bb, 0x2c7deea8, 0x1ee816b4, 0x7ba04ff5,
-	0xebc7973c, 0xe2171462, 0x485c78d1, 0x4f3a20cb, 0xd9dfe433, 0xdc04de91,
-	0x307f99af, 0xeff3aeff, 0xa6f4af8b, 0x2a1def9a, 0xef2ce2e7, 0xbeab54f5,
-	0xea6f9434, 0xc15fd039, 0x0dced654, 0x39535e61, 0xfcc4ade8, 0x7249be18,
-	0xa3094d2a, 0x3cf4545c, 0xaf7a8856, 0xa8c3ef78, 0xd55d25af, 0x0ebe67a5,
-	0x4b8e6fff, 0xbc5cbe26, 0xb6f74bd6, 0xdbcf8b3f, 0x7b24f489, 0x57017c72,
-	0xed087a4f, 0xc6aeebe0, 0x5cf7a775, 0xf3e6b54f, 0x157dbe91, 0x6ffc8080,
-	0x4fce073e, 0xf6df7bb6, 0xa37efce2, 0xf4bbf432, 0x44ef8f84, 0x86cfca18,
-	0x887c5007, 0x0463309c, 0xbc46bf8e, 0x6ababa6f, 0xaa2ba524, 0xbc794898,
-	0xaf2a8adc, 0xea447348, 0xaa74e917, 0x1a556f77, 0xf95557e5, 0xebe03528,
-	0xfbd0d5f0, 0x7c618e93, 0xf02e877c, 0xf0136497, 0xe5fe900b, 0x73a4ab48,
-	0x195ea745, 0xd8df77c1, 0x7077d840, 0xc10d7a59, 0xf919d357, 0xe53ea135,
-	0x548798ed, 0xf8419dad, 0x564af452, 0xc56fe508, 0x5c228e07, 0x2d4bde9d,
-	0xd3da5aef, 0x7fbd46c6, 0x836f051a, 0xb871b6de, 0x7a712fdf, 0xfdfb868b,
-	0xe3178b6a, 0xb2bfee22, 0x82295deb, 0x1c43983b, 0xe7e6bfee, 0xdee13db4,
-	0x09be7b32, 0xe9eceeee, 0x04fbf704, 0x7016ef9c, 0xa87816ad, 0x46acf016,
-	0xa47e53b8, 0x3a44fbc8, 0xc47bd29d, 0x112bb7fb, 0x08ca901f, 0x7d878077,
-	0x30c98854, 0xf179ba1e, 0x7412eecf, 0x1fc8dbab, 0xfcf2bb2a, 0x127b7708,
-	0x05c3bb87, 0x06ba2078, 0x3cb17bb8, 0x5d54f044, 0x9f50ce1c, 0x15e441e3,
-	0x7e267b84, 0xb800f8e7, 0x871f8df7, 0x058270f2, 0xe4d25ace, 0x23fb830b,
-	0x124b7f7c, 0xbf0d1e7c, 0xafbf8d24, 0x6f77f06b, 0x88b571fa, 0xef16aeb7,
-	0x511c2227, 0xe00879af, 0x4f0e34c3, 0xc8a47dfe, 0x164d28fb, 0xe0357ff6,
-	0x161fcb01, 0x19c210fa, 0x73c51fd3, 0x56c93cfb, 0x38454fb9, 0xf2efe1f5,
-	0x1b10a4b0, 0x6878cd98, 0x85a5fe2f, 0xc6f31798, 0x4ad7aff9, 0x44aeb23f,
-	0x7de903bd, 0xdd6de918, 0xcf0daaab, 0x57a5e43f, 0xcb67ee59, 0x5e89fdb3,
-	0x42407f82, 0xc13ee6bd, 0x5e916b87, 0x1edc7e68, 0xe0e8295e, 0xeefef16e,
-	0xee7e823d, 0xa0fcfc17, 0x7e3e3741, 0x74cd643f, 0x9498c71e, 0x20ef1361,
-	0x4e399846, 0xc0d7d130, 0xd9179834, 0xe94a5e36, 0x8ef64b9d, 0x7e36f89d,
-	0x7d23f314, 0x6773be25, 0x9b43bf98, 0xa1f50fd7, 0xd9dde344, 0x39c4de89,
-	0xa23d3174, 0x6520f788, 0xc4b64f6e, 0xdab5df7c, 0x7e81dfb7, 0x13e6de99,
-	0xafa7f3ef, 0x6be2f184, 0xf54764dd, 0x59cde40d, 0x2d577908, 0xcb0c55d8,
-	0xc1707cb9, 0xf44d0bbc, 0x5f8bdf11, 0x595d7547, 0xf64af480, 0xa93fa438,
-	0xf844ea1d, 0xe8bdac02, 0xcd487abf, 0xc1fb87eb, 0xfdb18943, 0xb9e2b370,
-	0x7593c4bf, 0xb09fc5a9, 0x3b53f54e, 0xde55a27d, 0x43fb13ac, 0xfe56a99f,
-	0xcb83f630, 0xc59f7f44, 0x0f147e07, 0x6e729674, 0xa4cfc92a, 0x0fef636b,
-	0xc216aad5, 0x47aa39f7, 0xe50ebe73, 0xee6f5c6b, 0x9d187721, 0x8c0d9c83,
-	0x2ffe88d8, 0x3396be83, 0x8c42e72e, 0xbac693eb, 0x3ef4867e, 0x9d01f702,
-	0x01f71ee8, 0x34c3cbcc, 0x5b949ba2, 0x587fe46c, 0x5eecf825, 0x046b5fc1,
-	0x7c803d5f, 0x81df0235, 0x13fa51f6, 0x90eb4fc1, 0x12dd20ff, 0x78f5ce9f,
-	0x6197bef1, 0x8c772cc7, 0xab1cf7a5, 0x0fda365d, 0x61ed7794, 0xfb05da17,
-	0xf7e8ebc6, 0x7a59dd91, 0x59e58dc0, 0x43c03f0e, 0x91d2cc4a, 0x2f733e5e,
-	0xe2abe8b8, 0xf4fd015b, 0x72a2b0ae, 0x949ea47f, 0x451fdec7, 0x9ef453a7,
-	0xcb5faa80, 0x70fd3fd0, 0xe113a552, 0x8f3c70fc, 0xcfcdaad3, 0x3e03b826,
-	0xe29bc5b6, 0x5f6752a5, 0x1f1ef5d5, 0x2f70ff76, 0x12ec12ef, 0x0c0d82f2,
-	0xf92661b1, 0x7bde2b50, 0x1b10de64, 0xcb139269, 0xf432e787, 0x0f94f5eb,
-	0xcdcbc8bd, 0x90ae5e5c, 0x434bcb62, 0x65e4377f, 0xd2315cb4, 0xb74d1795,
-	0x5d54a7dc, 0x66f2463e, 0xc1ff6c64, 0xfcede3ef, 0xf3e66a1d, 0x2cf7a7e5,
-	0xdefd7807, 0x83d42f0c, 0xf7c57f0c, 0x5a27ac62, 0xcab89e3e, 0xf40357d8,
-	0xcd02d03e, 0xaff8f0fb, 0xfbad57dc, 0xd5b9e141, 0x9c140fa4, 0xa8b4a1cb,
-	0x11f13a76, 0x9318d3c3, 0xfd7c7c9d, 0xdf883d0f, 0x7ce2b5e3, 0xc61abd7c,
-	0x1b7da4b8, 0x0e607aef, 0xe3c175c0, 0xe38f9d32, 0x14d90d3d, 0xbcb2c2df,
-	0xef1ba7a4, 0xdf0f1e23, 0x31c731ee, 0xe9d4fc14, 0x37bffd47, 0x1f582c7a,
-	0x8d537fdb, 0x83bb44ff, 0x5da246f9, 0x675dfa01, 0x9fbff504, 0x18dde938,
-	0x18da1f23, 0x8fc733ef, 0xf15be918, 0xdc21ced3, 0x33f78adf, 0xab9dd217,
-	0xf4d79d0f, 0xdc7c17ce, 0xc733e863, 0x4547d273, 0x7dc0359c, 0xca7fc596,
-	0x098f49cf, 0xf473187f, 0xca271e52, 0x7b94bdbd, 0xd3133c78, 0xd3ff9763,
-	0x3d51a47e, 0xb821b4ec, 0xd3daf2fe, 0x2fa5deab, 0x6280f3d6, 0x60bdc711,
-	0x79787c63, 0x2059be0c, 0x102f07ee, 0x7d065de7, 0xd0df7f15, 0x465d39b3,
-	0xd4f4add3, 0x1fa74425, 0x5fc9541f, 0x87f4015b, 0xd4f4987a, 0x698f7a78,
-	0x3d9713d9, 0xf9c00b78, 0x95324393, 0x10739d97, 0x87ffb65d, 0x3bfce28f,
-	0xefd2ab7f, 0x70727c26, 0xb7ebc51a, 0xbb9ef78b, 0xedc5cef8, 0x5c5c1bda,
-	0xbb9c14ae, 0x8bbbe897, 0x35f3c2ae, 0x7382dbe4, 0x565e900f, 0x4ebdef80,
-	0x788f75c0, 0xe8229279, 0x1fb60277, 0xea1cbb92, 0x3e72b615, 0x15431361,
-	0x10de8fe4, 0x0637bbef, 0xf2e0df3f, 0x0b45e25a, 0xff50d75b, 0x24c3f40c,
-	0x02c85c53, 0x8507fbf1, 0xe584b878, 0x21a5887a, 0xd6f908df, 0x77d6ff4d,
-	0xd69ddbb0, 0xc2e91a75, 0xb04e75ae, 0xebdd61d8, 0x73e72efc, 0xb6146fa1,
-	0x7579f0e6, 0xe3e7e7ad, 0x7ba7ad63, 0x7da9131d, 0xf1ec627b, 0x1fe317ef,
-	0x9bc22aab, 0xbc44ac5b, 0xbe105bb7, 0xd5f7c35d, 0xf627d60a, 0x2aeb4c91,
-	0xc4b52dac, 0xe6d4152b, 0x857afbd3, 0xdbb5f3eb, 0x1753fb4c, 0x97fe425e,
-	0xc6eb0d27, 0x2e6bfdcb, 0xaea8bc23, 0x7e913bbc, 0x7c553d8f, 0xec5e7bc7,
-	0x84e9e397, 0x49531a16, 0x4f76eaf2, 0xf74dfbac, 0x56a9e347, 0x80ec09e0,
-	0x0c9e132c, 0x3fb744fc, 0x8efcb9b6, 0xe21cf0f7, 0x509afe11, 0x0a2bf2ef,
-	0xe1b1e97f, 0xd7a0a4f7, 0x040fa063, 0xdf7e082e, 0xf5cbc4b2, 0x6f813f0a,
-	0x77c63e03, 0x08c2e7d0, 0x379127b7, 0x4e3fb193, 0x5b83e70f, 0x1e82f8f7,
-	0xcf5ec526, 0x59eb5d6b, 0xc7a042ca, 0x3eb8d49c, 0xee7afbd1, 0x05c72162,
-	0x4f8ba7ac, 0xfa7c2df3, 0x385b9ada, 0x9ffc0a9f, 0xd10f7fdc, 0xbc70b1f5,
-	0x7a54e30f, 0x486bcf5b, 0xd062e307, 0x1b10b0c1, 0x8f7ffd95, 0xfe684e0e,
-	0x3ee08f11, 0xee15fb02, 0xde4fc5d3, 0xbf3cc63f, 0xfd27e2b7, 0x9aa5f69e,
-	0x0ea73b0b, 0xf41df64d, 0xfb277ed2, 0x434961aa, 0x633f815d, 0xa3cf12fb,
-	0x6e9fa19f, 0xc6cfe245, 0x578bd2c4, 0xc72e0556, 0xaaea8bf3, 0x8fd1cba2,
-	0x973d0aaa, 0xce9b9ea1, 0xd623177f, 0xcdcc7d7b, 0xaab2bbf1, 0x983fce92,
-	0x94f4c423, 0xd80077ee, 0x47f24c89, 0x7eab2e2b, 0x1d01a9a6, 0x789adffd,
-	0x025540a7, 0xd0b3d3ab, 0x1194945f, 0x1fefc132, 0xb2ee7e2e, 0x8ebf6d26,
-	0xe8761ae7, 0x8e60fd1f, 0x8b59ca81, 0x6545ecff, 0x93c05f41, 0x1c731cf1,
-	0x124bf06b, 0x46cf13f9, 0x5acf13f9, 0xf30491e6, 0x5b3b0afe, 0x1ce87871,
-	0x8fc26152, 0x5f01e02c, 0x5bbb1f68, 0x1e5cebe7, 0x607d21ef, 0xb23645d5,
-	0xff09d6eb, 0x2fd0cff4, 0xe851704d, 0xe0c301bc, 0xc096beb0, 0x73c4e1d7,
-	0xaded190c, 0xf8dde508, 0x4f4c9762, 0x4f984a1f, 0xf3095e64, 0x1564597d,
-	0x931d0fda, 0x3f20ef5a, 0xe69033a0, 0xd67ebc06, 0x84b0e5af, 0x817912e7,
-	0xb5ce118b, 0x0bc32872, 0x77217ff5, 0xc1bd6066, 0x1f4ef450, 0xf7845e9e,
-	0xf3a60212, 0x8eb421ce, 0x33dcbcee, 0x2552d17f, 0x6feffcea, 0x5fcb9b17,
-	0xc62ffa71, 0xf93b5479, 0x1f4960fb, 0x57be7448, 0x94ee75dd, 0x64f2fb47,
-	0xd123c737, 0x41d5d205, 0x559d37ae, 0xc87d09bc, 0xf3323d9f, 0x7c3ccb45,
-	0xec22bc96, 0x53a03ad1, 0xe832a73c, 0xb7e29863, 0xaf0d1d21, 0x3c66ef81,
-	0xfb77d0c6, 0xf079e8b8, 0x31b9fa98, 0xe897183f, 0xcb973e55, 0x7a28e3f7,
-	0xf9f12dd8, 0xdced8a87, 0x1921646e, 0x20c73af1, 0xcf05653c, 0x8fe33227,
-	0x8d77b5ec, 0x82b62773, 0x0b9e75e7, 0xb9cfc6de, 0xa733e7a3, 0x3c16eef9,
-	0xdcd399ef, 0x7b9e3e6f, 0xf8ba29ce, 0xab774c43, 0x51e3fb9d, 0x2250fc5e,
-	0xb7a6f67d, 0x21e3545e, 0x46e6f1dd, 0xae609f7a, 0x73bfef9b, 0xf88aa759,
-	0xe35d300f, 0x5a6156e7, 0x27cc6ddf, 0xfa2a0df2, 0x84896e1d, 0x721ab86f,
-	0xbe18beb7, 0xb9bdd51a, 0x425f3b07, 0xf41a05b4, 0x321b3a5c, 0x5ef935da,
-	0xaede79e6, 0xf14e0e0b, 0x838a47fb, 0x6ebdd5d6, 0x58c1c107, 0x7c24d427,
-	0xbc49c174, 0xa5c066cf, 0x37f1dd6b, 0xf8fe855f, 0x1cdce4de, 0x790fe8c7,
-	0x579f3c9c, 0xc13e9c34, 0x0b939022, 0xb91ffedd, 0xb77afca1, 0xcb4c2eff,
-	0x95839d1c, 0x5537c421, 0x0390af98, 0x1c00a517, 0xb8141a3e, 0xd1e11938,
-	0xf482f7d2, 0x2e4ec3fe, 0x1ba70e0f, 0x1bab6d7a, 0xc8bd9be9, 0xf7e35af5,
-	0x38ed5632, 0x008dff7e, 0xe55e8f9f, 0xcb95cdef, 0x22ee6bde, 0x62ccb2ff,
-	0x7a4621d9, 0x1e0df858, 0x7bc4db76, 0xf39d7cd1, 0x79ef0e14, 0xcf74f18d,
-	0xd952de6e, 0xbcfdbef2, 0x957e3ca5, 0xae632d29, 0x2b09d8b7, 0xecf75d04,
-	0xd11afd07, 0x3a5fccfd, 0xd92dde99, 0xc893e9a9, 0xa738f1cf, 0xfd53f9b3,
-	0x4ffdc632, 0x1f912d58, 0x6f51fc69, 0xe7e42b53, 0xc87d1387, 0x5ceff3ae,
-	0x97ef899c, 0x3f70b454, 0x28bcaa67, 0x7d203fe3, 0xefdf3f68, 0xe108bf31,
-	0x5d7bf2e4, 0x369af3a6, 0x474332b5, 0xe5d5be7a, 0x7f907947, 0xc45dffbd,
-	0x30e7e1a7, 0x40e7ddf6, 0xce38c00f, 0x39bc5bfc, 0x0df91f48, 0x0ea53f4e,
-	0x5c81c4a6, 0x039857cb, 0x298d54d3, 0x98e34c4e, 0xe5ecd303, 0x9daa7f42,
-	0x2783fa45, 0xf7c34f27, 0x9f9bf3c4, 0x17db14fc, 0x927d912a, 0x9bf29e89,
-	0xee82fd5f, 0x28f3f9c3, 0x5b5bf74e, 0x39dd8b34, 0xff9ac1ba, 0x9f359376,
-	0x33e6b111, 0x03f35a0f, 0x7d266d70, 0x1e1eff73, 0x9a7a529f, 0x1e7defdf,
-	0x3c22a060, 0x3e49d9b6, 0xce6d294e, 0xd38778c6, 0x586dbb4f, 0xdceffbbe,
-	0xeadceeee, 0xf72577a4, 0xe2c717bd, 0x6a1df092, 0x3f2c46e7, 0x8d90d71d,
-	0x4fa845fe, 0xbbb04b71, 0x71bb408e, 0xbd06a5e7, 0x69be2986, 0xfdf83fe7,
-	0xf6adce94, 0x9c51c630, 0xd3e4f5de, 0xb7a79f48, 0xec7d200e, 0xc3642979,
-	0x70f7437e, 0xf3884ffc, 0xe954e458, 0x7e3dab16, 0x1d01e842, 0xe879b527,
-	0xd6b8ba17, 0xc24beeba, 0xa8a77cd6, 0x7d331b7f, 0x10f8c74f, 0xdc34aaef,
-	0x7ec53767, 0xc173fdbf, 0xa53d4f17, 0x8b2b7419, 0x37991ef7, 0xe2befba5,
-	0xdb73eeee, 0x8e800325, 0x4316114a, 0x4697bfba, 0x0f85db8d, 0x38927fd1,
-	0xadfceb2f, 0x5539f04c, 0xef896455, 0xaafbd2e8, 0x4d53697c, 0xed4151fb,
-	0xd27c94be, 0xdca5f757, 0xca67da66, 0xb9481eb6, 0xdb6bfa19, 0xebefd0a2,
-	0xe279cd95, 0xf8490981, 0xf9c06e5d, 0xe7fa3962, 0xf25e1ada, 0x8bd03d60,
-	0xbde39ac7, 0xa5c76b0a, 0xe9f1354d, 0x834ba5d7, 0x0e74ca9f, 0x5a72e79f,
-	0x461ef172, 0x1dff2d69, 0x1b86d2be, 0xe11abbae, 0x4fdf9ebe, 0x9e5856cf,
-	0xb653fc0c, 0x8fef86fd, 0xc7c1ef86, 0x3e70f9c6, 0x2d24f8d9, 0x3fadbbde,
-	0xee76f743, 0x44ff71b5, 0x7b465c34, 0xfdef7e38, 0xe508ab81, 0xa2f7f412,
-	0x3fb52c6d, 0xe47d0368, 0x6bd0e4c4, 0xd3954337, 0x570fe1ac, 0x95965c53,
-	0x253e809e, 0x373ab7d4, 0xf48dbe4b, 0xb5f67975, 0x97fb5aa8, 0x943a3c51,
-	0x8a37b4c7, 0xa27ed6c3, 0x47a57cf1, 0x68f77e32, 0xa25e99a4, 0x119df5eb,
-	0x2ab7dfa2, 0xcd720a5b, 0x1d97efa4, 0xd878a1ad, 0x19c871e8, 0xc13b8a68,
-	0x7c4bd1fd, 0x027a14ec, 0x22d91c93, 0xcf287c5e, 0x48a7bbd3, 0xa5104097,
-	0x5ea9b297, 0x6cb5eb84, 0x4bcfa63a, 0x99640791, 0x33f203cb, 0x79278b6d,
-	0x3eb7a6d0, 0xa3a473f1, 0x1e74d1fa, 0xefdc5fd6, 0xe846f36e, 0x77e358bd,
-	0x9e74da71, 0x5276692f, 0x8fe9d53c, 0xcb979234, 0xeb138e30, 0xd9b4ed3f,
-	0xbd3b5f40, 0x8c64efbd, 0xe06b6e0b, 0x6a9f8aef, 0xfb593be8, 0x9a37fd8a,
-	0xf17d8def, 0xdf13fe08, 0x8bf8f54f, 0xacdfb83d, 0xa9d371e0, 0x2a332b7d,
-	0x68c9e063, 0x6655a497, 0x79d2bda0, 0x91b7cbab, 0x0ae953eb, 0xc8d3ddf9,
-	0xfc2f92af, 0x79e9f749, 0xbea07877, 0xe1faea1b, 0xe5073eff, 0xfc77e88d,
-	0xa1ddf640, 0x1f3eed0f, 0xa015905f, 0x03f4e3fb, 0x7cfe3036, 0xa0144585,
-	0xafb8f9b7, 0xc93ca18c, 0x25ebf9cf, 0xb05c238a, 0x7c1ebac6, 0x1fbcdae7,
-	0x292fe116, 0xb0b8c50e, 0xd68b4a06, 0x718bcb5b, 0xbc50f0ff, 0x94cbc517,
-	0x19cb59d4, 0xad1f908b, 0x7b4bfeac, 0xca7db82c, 0x6bf9f58c, 0xa3b9163c,
-	0x50f9dc92, 0x95f5a3ce, 0xd20037a2, 0x1cfec49b, 0x6d2733bc, 0x4b1da401,
-	0xc82da427, 0x7cee7bc4, 0x8ed3231f, 0x8fbf98f8, 0x45953a57, 0x7177f106,
-	0xa58fee18, 0x346452cd, 0xe42c1de6, 0xe3bfcb19, 0x6eb820fb, 0x63313df3,
-	0xf35eb8dd, 0xc726f677, 0x10cf71ab, 0x2f2e6bd7, 0xab287013, 0x3afc5bb7,
-	0x90a5ea13, 0x7f78dbfb, 0x55da95a9, 0xb7697e34, 0x5ff62bf4, 0x1399b7d8,
-	0x68a135f0, 0x798b8c83, 0x878e4ba8, 0x0f75892f, 0xdf80b0e5, 0xf4143743,
-	0x107d7e43, 0x02fecff5, 0x9f2439c0, 0x45809f84, 0x5c5e301c, 0xca9e5766,
-	0xfcf397b3, 0x8ae04f3e, 0xaf6081da, 0x873a01a9, 0xbde72f9a, 0x471bf78c,
-	0x425e0626, 0xf9b7ccbc, 0xb7c42b07, 0x17e411fe, 0xf0e1ca5d, 0x4bcad8f0,
-	0xc5d9632a, 0x933fbf02, 0x3e5ce81a, 0xa3ef8bb4, 0xd54eacee, 0x8bfef7ec,
-	0xfb094790, 0x4f5ee95b, 0xee890ee7, 0x1d223f13, 0x8fb6fba1, 0x6865e95c,
-	0x9e01a7c7, 0x223eee50, 0x5ef815b1, 0xace3565e, 0x9e212f45, 0x787ce2b3,
-	0x38de5fde, 0xd1772e49, 0x15beb9fa, 0xcf01b95f, 0x8de75283, 0x0e748b1c,
-	0x2d779eeb, 0xe3d0ff7c, 0xb9faf1a5, 0x96d3de38, 0x8f17d287, 0x16f3f1c2,
-	0x387c84bd, 0xa1ee8e3a, 0xdcac02a7, 0x8d5d287d, 0xcb1a547a, 0x60fa87d8,
-	0x58ef0cda, 0xe43fb9f4, 0xdb24e3e1, 0x50b379e4, 0xf3cb1bcf, 0xf92c7e7d,
-	0xae111237, 0xed5271a5, 0x17ce3a6c, 0xe85ea3bf, 0xcb823f40, 0x9529ef84,
-	0xea7e3819, 0x69269e50, 0x3c0f8a11, 0x99bde064, 0xd12de9c7, 0x25e9c919,
-	0x454a4c5f, 0x1b50ee3b, 0xbf20d418, 0xec340d0e, 0xf48b88cc, 0x792361f0,
-	0x2df7617d, 0x5ff7e0c9, 0xfa1b0692, 0xa1d7af0f, 0x513213fa, 0xf5c1beae,
-	0x7e5c4ff1, 0xa65f57f2, 0x4fbf8ec5, 0x0a78e048, 0x61638b9e, 0x3838ff93,
-	0x13d233fb, 0x2c3ce783, 0xf027da6c, 0x1c734dbd, 0x7ed15977, 0x72841dfa,
-	0x01f742d6, 0x71ac1bca, 0xc5c597e7, 0xf3a0d71e, 0x0b1b39e0, 0x1e3225f5,
-	0x21d7f688, 0xc2d573a9, 0x4b17ba24, 0x73c13be7, 0xc6990b1a, 0x63eb9e0f,
-	0x33cd77cd, 0xaee9fa85, 0x9af5acc7, 0x2c7aa73e, 0xe383d5a7, 0xb4adebb4,
-	0x29cf048f, 0x6fd8ced4, 0x90b6c23a, 0xeedcfc0a, 0xe21de5e5, 0x6fa8cf3c,
-	0x5b3ed7f4, 0xf8def713, 0x556de8bb, 0x2e007820, 0x219f368f, 0xf359747f,
-	0x418b823e, 0x89f0dd0f, 0x7c132167, 0x225baa52, 0x69ede036, 0x7bb86e0f,
-	0xc990d814, 0x871f05fb, 0x9feddd36, 0xbbf8e508, 0x8ebe260f, 0x73e2eacf,
-	0xd90f3312, 0x42172e64, 0x9d4f7775, 0xfa8bca68, 0x9b43ed5d, 0x340a98af,
-	0xb78a3595, 0x27c1e6bf, 0x4e4e595e, 0xdf111a8b, 0xcf3839df, 0xa23bca6d,
-	0x8fc82ef2, 0xa8f5e536, 0xf2a8a4f2, 0x40fca8b4, 0x1dcdbf5e, 0x40fb2c19,
-	0xd4f83fde, 0x9efbf815, 0x7322fd6d, 0x358f05f1, 0xf02bb6f2, 0xb3cb7cf7,
-	0x56d3eff8, 0xc93e4b34, 0xba2b3f24, 0xb55bf3ce, 0x0e10a3f9, 0x1ca32f2d,
-	0x74926b28, 0x0d5debd4, 0xc79423db, 0xbb535e76, 0x963f6e06, 0x76a11c35,
-	0xd23ff6bd, 0xef7c7c46, 0xdea9f7c8, 0xd89fcef9, 0x5befeb0c, 0x751e76f5,
-	0x4e2c0a44, 0x7f7eee48, 0xdbfb6dbd, 0x0a2fbfdd, 0xf9fbdbdf, 0x8d1c900f,
-	0xc41e07ba, 0xf9bab8f9, 0xbde380c4, 0x7bd2cf23, 0xdd1c7fb4, 0x03aa16fc,
-	0x2cce4bf1, 0x9fdda053, 0x438f8fcb, 0xb4df0b7d, 0x67e37dc5, 0xdc12f852,
-	0x81651e8f, 0x5bdc704b, 0xc3ef87cb, 0xac384c9f, 0xef863eb6, 0xf0786f95,
-	0x98142be5, 0xeb7761df, 0xb709fc20, 0xf06f094d, 0x7f2b727c, 0x1dff4551,
-	0xa0f0e7e1, 0xc83641d6, 0xa6c0993f, 0xeb787e53, 0x3d7f9863, 0x3faf04e1,
-	0xac9075ba, 0xf27209a3, 0xdf90a98a, 0xf7e6c7ac, 0x37ae04da, 0x369bf31b,
-	0x8453ffdc, 0xfbe32b0b, 0x76335e0d, 0x5b9d3c80, 0x66db6a72, 0x1fdcc780,
-	0xdb9c93c5, 0x55dd76dc, 0x50870479, 0xa611c61e, 0x7ed3780a, 0x215d7248,
-	0xee1fa27d, 0xf1ba7d81, 0xe2dc1ee9, 0xd2e2fda5, 0x37a8edca, 0x451dcea4,
-	0xc7a145fb, 0xddc9e92f, 0x52193869, 0x3ae92fa8, 0x8db2eb97, 0xef5223e2,
-	0xf51e9372, 0x033df8a0, 0x0fa23be0, 0x36cbc097, 0x096d9eb1, 0x80f6bfdc,
-	0xf3f51a67, 0xc47fe49e, 0x42ca6321, 0xc5a7f24e, 0xf372be91, 0x202b9006,
-	0x7989d7d7, 0x097b5baf, 0x466e29f9, 0xfc28f13f, 0x67d7efee, 0xbffeb754,
-	0xaef2032e, 0xdd6ebb6e, 0xf33f7f2c, 0x0dbaf6b9, 0x5b90dcbc, 0x7b79d2eb,
-	0xad4abf63, 0x3ea4e3e6, 0x5c46c978, 0x28c2bc47, 0xece17b7e, 0xd1971b11,
-	0xad2d7ffe, 0xfdfdf99f, 0x5a3f0ed0, 0x7a86c43c, 0xc29f81a9, 0x1257fee1,
-	0x89373d60, 0xf035efdf, 0xb74f8c64, 0x907f51e2, 0x3b407f41, 0xeb403135,
-	0x0c627d07, 0xfae06e0f, 0x3316d204, 0xad2997c1, 0xfffbf0e3, 0xfdb53820,
-	0x4ff4e02b, 0xc947779f, 0x0c379021, 0x7a5f2ffb, 0xedff72dc, 0x23d1013f,
-	0x8000702a, 0x00008000, 0x00088b1f, 0x00000000, 0x7dc5ff00, 0xd554780b,
-	0x733ef0b5, 0x9992bcce, 0x924c2664, 0x84e3c849, 0x71100840, 0xf0444312,
-	0x51888431, 0xd4503b69, 0x20717ad8, 0x9926023c, 0x4b62d5a8, 0x79120cff,
-	0x22341809, 0x0281c150, 0x06f55bc5, 0x701a8c45, 0xaf7a8a44, 0xb7ad8ef6,
-	0xff7f6c57, 0x4a8f8808, 0xd2f5a232, 0x5ad7fd97, 0xce64ef7b, 0xb6b4a924,
-	0xdc3ef9bd, 0xd9cfb3ee, 0xd7b5ed7b, 0xf6b5af6b, 0x4cf5a61e, 0xd8c05c0a,
-	0xce6a2566, 0x7c2c64ae, 0x61edf148, 0x67cf07f0, 0xf7fb193b, 0x95d5a0b4,
-	0xf19fd8c9, 0xe6c60aef, 0x2729bf7e, 0x8ded0658, 0x61cb1823, 0xcfbbf52c,
-	0xd500ded4, 0x7a3f4bb9, 0x3f7c0f7c, 0x8ca97bf7, 0x43ef03e9, 0xf7c18c8f,
-	0x5b6dbcef, 0xd2842ecf, 0x793519d2, 0xf986bca0, 0xef7bc056, 0x27435898,
-	0xbe0ef7f4, 0x5563097a, 0x35e5bbdf, 0xdbb19136, 0x93632a5d, 0xf8ab5b18,
-	0x258a9873, 0xbbe0db0b, 0x644b2cf0, 0x7d63114f, 0x0cd85311, 0x23b875fd,
-	0xb8c1175b, 0xf995d71d, 0x1f5fd0c2, 0xef867e63, 0xf7a54b2d, 0x4c3ddc3a,
-	0x744bf6c3, 0x0ec24017, 0x19faa17e, 0x5a37e3d4, 0x7814bb22, 0x76c2ce5e,
-	0x3e325f6c, 0xf3fa8612, 0x7f7d0e30, 0x0f644a63, 0x8f82cfb6, 0xa371dea0,
-	0xfe861237, 0x47622cec, 0xfa763a78, 0x8c1c3273, 0x05acaae5, 0x8228efe1,
-	0x2b59943a, 0x0701cdd9, 0x713fcfe2, 0x0f007396, 0x6899775f, 0x3d95a93e,
-	0xf437ff4f, 0x7ddbd6c7, 0xe1b0a063, 0xcf6f58ab, 0x3b997826, 0x66f88558,
-	0xb803fc1a, 0x89c81fea, 0xcce7c3ac, 0xb1eb8557, 0x479fe9da, 0x5520fff0,
-	0xb61ff847, 0x0ab635b3, 0x66d61528, 0x0bfc00cb, 0x43fb5878, 0x37630c00,
-	0x978000e3, 0xd670d7ff, 0x2bf3c3a9, 0x07ad0a5d, 0x556df9fc, 0xbc67cd8c,
-	0xd4f2fe7d, 0x58899577, 0x1a6b51aa, 0xa5735b3c, 0xef46c7bf, 0xe28f3fb1,
-	0x0bfa0da5, 0x25b7f132, 0x09ba44ee, 0xd86977e2, 0xba9defff, 0xfdf0eb03,
-	0xf8765c44, 0xfbe074be, 0xf9a3173a, 0xfc3955cf, 0x475535ac, 0xc8fc4afc,
-	0xd7c24eb2, 0x713f90fe, 0x724e393c, 0xfcbaf7bf, 0x00be2237, 0x0f74d1ef,
-	0x75a545e2, 0x63d7864d, 0x43b06f89, 0xd556dcfb, 0x33e0377d, 0xf349ccb8,
-	0x9cdef095, 0x158cbf1d, 0x74ffee0f, 0x8695736a, 0xe9c65ff3, 0x02b72d9d,
-	0x62f112e2, 0x5d03a819, 0x63f1642c, 0xe7886526, 0x8445f45a, 0xc247517f,
-	0x2fdff4f7, 0x49ef89ac, 0x92ba617e, 0x2ba0bf04, 0xdd70d15d, 0x375f0a82,
-	0x373e258b, 0x6e183650, 0x82d5cf89, 0x245d24ee, 0xe2357be3, 0x7c60d27b,
-	0xf93d2c7b, 0x99706fd8, 0xdc94f095, 0xfa11633f, 0xf03b21ee, 0x16ddd00f,
-	0xdd7a2145, 0x646a5772, 0x3da7f225, 0x19f117be, 0xad157c3a, 0x1492ef77,
-	0xdb2bc19d, 0x9441302c, 0x9c9d8733, 0x4a7a4b8f, 0x617a9f90, 0x9f587ece,
-	0x9dd5d7de, 0xc1024561, 0xeaebf358, 0xdeffa42e, 0xfde6af67, 0x19d548ac,
-	0x618843d4, 0xfe143718, 0xbc032b43, 0x2cc5349e, 0xe0175e34, 0xff09c257,
-	0x435fe17a, 0xe8bc80c5, 0xbf1c06c3, 0x9807cb8b, 0xe71a12e1, 0x1d6c29db,
-	0x526cdb8c, 0x6f6826fc, 0xb23e3a5e, 0x4361c392, 0x20146a3e, 0x9b589b35,
-	0xf7c03152, 0x2513a6cd, 0x36f195b7, 0x85bbde0d, 0xf78175f1, 0x5f002a8e,
-	0x4c7d6da3, 0xfa45ba45, 0xd8a5f687, 0xff80345e, 0xf9bff5e6, 0x7cdfc213,
-	0x8d1748c0, 0xb1e7198f, 0x8a9e9134, 0xb524e806, 0xd589e392, 0x8018c8b0,
-	0xa9ea29d7, 0x8a88b1b5, 0xcd565a78, 0x66e9024e, 0x8199e91e, 0xecace3f4,
-	0x0ca1f364, 0x11fcc07d, 0xf74a7b80, 0xc24697ce, 0x58daeefb, 0xb4374e3e,
-	0x4e8bb6ec, 0xbeb0345d, 0xba4bce12, 0x41cca937, 0x0077d1e3, 0x83bf7f8a,
-	0xfb371bde, 0x6ef2c482, 0xa4d32efa, 0xe0f6bd12, 0xcd1be423, 0x38c0a39f,
-	0x328c979b, 0x82a67ae1, 0xbcb9437c, 0xaeec7db0, 0x7f678415, 0x07b7ca09,
-	0x09ce80d3, 0x942abe9f, 0xeaeea52f, 0xbfa0bb5f, 0xffd5dca7, 0x138e258d,
-	0x47f4e270, 0xa648be90, 0x23bd64e7, 0x6e2ecbdf, 0x0c716f29, 0x17f01eff,
-	0x35be2de1, 0x4d0fcb9d, 0xffa2faa1, 0x475cef30, 0x374469f0, 0x222f6db7,
-	0xdac0dc79, 0x591ade89, 0xbbf482c4, 0x69c2c6c8, 0xe08b1740, 0x172874b5,
-	0x3d32b16f, 0x4496fd61, 0x2146f58c, 0x31616e0f, 0x7d96fefa, 0x2c35ed49,
-	0x26f684ea, 0x62a68b1b, 0x6f6c69d9, 0xef417166, 0x3e26b67f, 0xbe7c1d67,
-	0x77758b37, 0x20d444d7, 0x1dab7bcc, 0xbe065774, 0x33eb4ed0, 0x5a4ef965,
-	0x7f0af4cf, 0x4fa83dd1, 0x76fb355e, 0x27bedd01, 0xe7e24bd6, 0xbbf5575e,
-	0xd514f788, 0xdf8ff344, 0x9cfc2563, 0xeb8dbd02, 0xdd9b9f7f, 0xdeca1b3c,
-	0x7a3bdd56, 0x55c9a234, 0x1839db30, 0xb39eebcf, 0xb8dd2037, 0xb7c226dd,
-	0x65cc7e7c, 0xddd57aa6, 0x522bff02, 0x088abb23, 0x9e9113dd, 0x7d4946aa,
-	0x82ce26ca, 0x5666bbfa, 0xe6f509d7, 0xec411deb, 0x07ed07af, 0xb9b817a8,
-	0x5b7028de, 0x2eb27e68, 0x06e92be7, 0x52fea1c6, 0x84a5e22e, 0xc85b8c63,
-	0x7f89b641, 0xe6eff427, 0x493b2925, 0xafd3f6ff, 0x96fd1189, 0xd7882c05,
-	0x795c84e7, 0x3695ca4e, 0x9a2b972b, 0xa832ee6b, 0x9941f73f, 0x95e01d6f,
-	0x83de8295, 0x4a3f1bef, 0x5e9e91d1, 0xef5fe8f9, 0x9fb419fd, 0x5ba2c0fd,
-	0xd2017da1, 0x73dbac18, 0x6047970a, 0x8fd4307f, 0x38f6c08d, 0xb1c1e36e,
-	0xb41c7f64, 0xc846fb08, 0xe0b4c6cf, 0x4fd085d6, 0x3e9993e3, 0xbcf664a0,
-	0x5ee8f239, 0xf7643f6c, 0x1b7e81ed, 0x1b5e3853, 0xdf491b9f, 0x4e0f613f,
-	0x733cc377, 0x3c9f91ad, 0x05e37281, 0x677bd92b, 0xc2117459, 0xaed3b67f,
-	0x70277be0, 0x4250e95e, 0xeaf3829b, 0x043d9276, 0x10b39a7c, 0x36b93bbe,
-	0xe04bcf9b, 0x0986e4e9, 0xcd9b17c4, 0xb3f0bc7c, 0xc27fbd0a, 0x0391981c,
-	0x974f13f5, 0x534056fb, 0xb512c05f, 0xee873d00, 0xbd5e76e3, 0x7881df49,
-	0x09538762, 0xa11eb95e, 0x62678b8d, 0xf2e9687b, 0x1c7ca3af, 0xde51cf8e,
-	0xd9b904b3, 0xc805e2cb, 0x461adb4f, 0x9f514675, 0x91f38f74, 0x585e655a,
-	0x171ba07c, 0x9994f77f, 0xc87e35e3, 0xbe7cf44c, 0xb57ce3fd, 0x707fae2a,
-	0x65c8109c, 0xe48ff926, 0x1d5d4272, 0xfec8ceaa, 0x2d973d0c, 0xfb633aec,
-	0x1de0ceeb, 0xe6bfa06e, 0x9de7fffb, 0x38df8465, 0x9ed645c9, 0xca797c49,
-	0x748b9fec, 0x5a89aeeb, 0xf3e827e6, 0xeaaf820d, 0x63fec2ad, 0x1f224b51,
-	0x6aaaf6ca, 0x72cbdd23, 0x677fa0bd, 0xc1f7cb8c, 0x1fc126ed, 0x1ea2b4df,
-	0x6641c29b, 0x1c47a885, 0xfd4ebfd8, 0x6a20f94f, 0xe17a87a9, 0x9165a8f2,
-	0x004f9128, 0xcc1b51df, 0x2756d4fb, 0x03406fe7, 0x3268b3f6, 0x48b97d23,
-	0x02b5fb05, 0x3d5deb9f, 0x9fa72eb0, 0xfafa7376, 0xf0056023, 0xf7898f3d,
-	0x82ef60ac, 0x4da67b1c, 0x607ee289, 0x2eeb16de, 0xb5f2117b, 0x7ae2755f,
-	0x8e48576e, 0x569b6bcd, 0x4bea15b2, 0xeb405c0f, 0xd399369f, 0x9b88d2e5,
-	0x2114e2f4, 0x11adeb1f, 0x3fdfd90b, 0x01f21851, 0x74764ff4, 0x53947c23,
-	0x280f1831, 0x10f40dd7, 0x5d83a849, 0xcb93a534, 0x9cf20655, 0x524bd825,
-	0x671ca3de, 0x919ff649, 0x1f52c23e, 0xf4c7b971, 0x527b946c, 0x0aebdf2e,
-	0xae49b974, 0xf5c6ce8d, 0x72e4f585, 0x7842bf73, 0xa42d626d, 0xe81ea44f,
-	0x91e8571f, 0xeb986ad3, 0x2a26eb2b, 0xd117775f, 0x27594b78, 0x57a913e9,
-	0xd783a386, 0x7e0e84bf, 0xed007486, 0xe8b01f8d, 0xe35e3065, 0x9a6d1672,
-	0x44e74bc8, 0x4f5c8fd2, 0xc49eb8da, 0xf43ce532, 0x4c7eb265, 0x7ac987d6,
-	0xf5c2db30, 0x69675c9d, 0xe74f64cf, 0xe594c076, 0xfcc19511, 0x3ff9a636,
-	0x60349cce, 0xb2de84d7, 0xb10bf4d9, 0xe0a3601e, 0xd369c5bd, 0xf686ca6e,
-	0xc8fcc690, 0x9780a957, 0xbb7cf09d, 0xb36b7bb0, 0x2d7bdd39, 0x5acd7e9c,
-	0x703b9580, 0xcfb4625d, 0x1732678d, 0xe7c4a3d2, 0x577c2776, 0xfd71df81,
-	0x8dbdffd4, 0x7c24a5b5, 0x9d9cfd5f, 0xcfe7eae4, 0xb256233a, 0x6e858247,
-	0x57eb2fe8, 0x7b53b256, 0x3e92739f, 0xd0fa15ed, 0xd128f683, 0x5fae2acb,
-	0x21275d71, 0x648f5535, 0x35cafb48, 0x4a045123, 0xcdc9acfb, 0xf6c1aced,
-	0x8a2f6890, 0xcae9cf5d, 0xcfccfb4a, 0x62773ddd, 0x6861e01d, 0x588fff9f,
-	0xe981d0e7, 0xe787dfe5, 0xc7c380a1, 0x472c1fb1, 0xdfaab57a, 0xf406deb9,
-	0x1e5d4335, 0xd1e60bbf, 0xa170ef94, 0xfc29ab9e, 0x846f2ff5, 0xcc0787fa,
-	0xbceb8acc, 0x1b1d7a67, 0x5dfcbc35, 0xe89f3112, 0x5b97e049, 0x4deb19f6,
-	0xa87ac69d, 0xc82f58cb, 0x4f4e7a70, 0xfbe1d920, 0xd5b5d033, 0x4ec1f2da,
-	0xbcfad780, 0xa7d1f495, 0x067160ee, 0xfc535bca, 0x5ad9e218, 0xf444f1f8,
-	0x3fba846f, 0x02b4b051, 0x38cac4ed, 0x3faf91fe, 0x742bcfb7, 0x01b7810d,
-	0x899b31fc, 0x3ad60cf0, 0x85ce492f, 0x2c789f04, 0x845f0ffe, 0x9d9a2ff9,
-	0x9e9bbae2, 0xaa4e67f8, 0x60927b42, 0x572da164, 0x2dfb887f, 0xae096f78,
-	0xf059e9ff, 0xb0d5c01e, 0x46c3eb85, 0xbe434b16, 0xd3bb066d, 0x477c4b06,
-	0x5b875f06, 0x5155e2da, 0x8c8edff8, 0xa70871da, 0x802d27f6, 0xfb1ab1f4,
-	0xaf93b04d, 0xe07ae0cd, 0xd7767d96, 0xdd1e0329, 0x2ba87a86, 0x912a75c7,
-	0x61fc84ff, 0xb8968a79, 0x09577a1f, 0x6bf88b5e, 0xa658f5b2, 0xfc57f8c1,
-	0xf79233e9, 0xa7cd978b, 0x5d80c47d, 0xb4f9256d, 0x3d20aef8, 0xdf2b697f,
-	0x6ade9e17, 0xa7ef11d7, 0xe3fdf3b7, 0xc4473ce2, 0x857bff06, 0x8bdbdb9b,
-	0x19453be1, 0xbc64c78c, 0x55f0ffbd, 0xf7a3a45e, 0xdc2f1f19, 0xf78fedc9,
-	0x62af805d, 0xf7f60efe, 0xefd8177e, 0xaaf9e20a, 0x2e2e510f, 0xd0faaede,
-	0x9c87604e, 0xbc598fe4, 0x0b71cafd, 0xa7dfd81d, 0x5fa1a623, 0xe895c768,
-	0x02f7c289, 0x89d7ee11, 0xb5cf015d, 0x1d93171d, 0x95bb7477, 0xedb6e9c3,
-	0xf15c79c5, 0x4af89527, 0xda20b133, 0xff161dc7, 0xfd67e438, 0x70333de1,
-	0x959fde5d, 0x1ff7a26b, 0xf10b9857, 0x85965ee1, 0x5a2b17cf, 0x61b7f900,
-	0x899992cb, 0x866a4ef6, 0xad35eb4a, 0x8f567970, 0x7ae9f883, 0xdb4da3d4,
-	0xfc707f81, 0xf2ff6fd9, 0x3f224f46, 0x4cc55edd, 0xc3cbf609, 0xc27a235f,
-	0x6be028bf, 0x57d7c0b1, 0xaa6b2be5, 0x12968be4, 0xef8ba394, 0x0d71296e,
-	0xf3f45761, 0x0f9cc3c5, 0xb850cbef, 0xc32f20ff, 0x6e18cfb0, 0x3528e65f,
-	0xf9b15e91, 0x940f7f98, 0xc62db0d9, 0x0c81f7fd, 0x640fda8d, 0xfb5f7b70,
-	0x5efb6ddd, 0xcd4d7987, 0x80cf6e08, 0x97f3217a, 0x71ebbae3, 0xb1983557,
-	0xbbb26288, 0x6e56c3d8, 0x8edc6ac7, 0xf6c99cde, 0x8fd84bae, 0x997f6277,
-	0x62f61724, 0xffc7bd3f, 0xdaf10c78, 0x44f1f05c, 0xe7420fb4, 0x1fa0b33e,
-	0x90add1cd, 0x02f8773c, 0xd425e90c, 0x282d8b3d, 0x21c3901b, 0xc913d71f,
-	0x0653faf3, 0x3c84efdf, 0xfde7ea71, 0x3b7f9c11, 0xb73e9cdc, 0x3f214b2d,
-	0xc44f36e4, 0xb5ff408e, 0xa5ed2a7c, 0x67efc225, 0x5f94fddb, 0x288efa45,
-	0xd75831ae, 0x35f47f39, 0x30a88dcc, 0x8bbb87ce, 0x77d9dfc9, 0x854f9a60,
-	0x1feec736, 0x788519ad, 0xf0fb32ea, 0x27af877d, 0xe1f7e70d, 0x386993ee,
-	0x2add86bf, 0xf221bbcd, 0xb2c2d649, 0x33f0b901, 0xca3af825, 0x1c52e601,
-	0x0f94be38, 0x34feee1f, 0xfb83816b, 0x567f480b, 0xa7978d0e, 0x8e7ed3dc,
-	0x39715fdf, 0x1e8f975f, 0xee5046b7, 0xfd07647d, 0x3f6f2096, 0x777d7272,
-	0xefee432a, 0xdf500b3a, 0x2a6fd7f4, 0xf89ca135, 0xdfcf8b8e, 0x402ce963,
-	0x628dfc7e, 0x1ae967ec, 0x6c808b13, 0x5006b25f, 0xa3e8f203, 0x40299f47,
-	0x9ee1ff79, 0x27e60a67, 0x9dfc97c0, 0x78e57b2c, 0xfd266fc2, 0x344b1ea8,
-	0xef9bc70f, 0xe57f72b3, 0xf9547e30, 0xfdc2db3e, 0xab3e7da1, 0xbf28748e,
-	0xf1486beb, 0xc7db7da3, 0xe6ff246c, 0xacbf0b77, 0x83da3fdf, 0x7df918fb,
-	0x1e15ff52, 0x974a4f4e, 0xd483fe42, 0xe3c938b2, 0x7bde59bf, 0xe4133d60,
-	0xbff3ac3d, 0xd9345f21, 0x3246c7e2, 0xe20b0fa2, 0xd0ecd2cd, 0xad653f50,
-	0xbf15f4e4, 0x2afb44c3, 0x81d7ae4b, 0x928aecf2, 0x30133694, 0x6d2527a2,
-	0xf201c622, 0xfde94b73, 0xfba73570, 0x7f231670, 0x516b0e5b, 0xb8bb5e48,
-	0x326f3edf, 0xea83ad73, 0x9edc11ac, 0x16df32f1, 0x5dd698b5, 0xc490ff41,
-	0x480bd487, 0x3f1f283f, 0x3f446c52, 0x7642b74a, 0x9cea6aa7, 0x470efd8b,
-	0xc847134f, 0xa7a73ffd, 0x893ffafe, 0x188f269e, 0x3a829e8e, 0x36d793d1,
-	0x3f093d34, 0xcfbf79f1, 0xbfdc01c2, 0xdd7c0b66, 0xfc4ee427, 0x9bf49b0e,
-	0x99df382b, 0x3699bfa2, 0xfd455447, 0x9c7f33e1, 0x187dffe8, 0x27dc5fec,
-	0x0efda0e5, 0xf395c8e5, 0x16375a74, 0x417f41eb, 0xd236c5ea, 0x629af78f,
-	0x64af6845, 0x8fd96f8f, 0xb73d9174, 0xed2562ac, 0xa8dcf2ff, 0x92b7500f,
-	0x7559741f, 0x0488d4e0, 0xdf10e17b, 0xe5df34cf, 0xbbd3e7a7, 0x1a107db9,
-	0x387b216d, 0x7184a5d4, 0x96039b9d, 0x6b41da08, 0x095fee15, 0x3cebb06f,
-	0xa0afa3ee, 0x740fcfb8, 0x488a171e, 0x8ecf6fff, 0x35bd23ef, 0x91efc838,
-	0xf83a3f1c, 0x1fc7ca85, 0x8efc68c3, 0xeaaf1e72, 0xfee75ab8, 0x1d7eb115,
-	0x6e39fcb3, 0x18d607b4, 0x85c659f9, 0x18809cfa, 0x7afe6f18, 0xae43ad3b,
-	0xd2ccf1ca, 0x0cff5c6d, 0x67e40b96, 0x162c9ace, 0xfa6fc446, 0x05241cf9,
-	0xbb4573d6, 0xcb39378c, 0x79684502, 0xb7e9bbbf, 0xbd00a4af, 0x8e9fa166,
-	0x68c2ca6f, 0x987f93f7, 0xfc7dc9d7, 0xc90009a0, 0x5cffd6c5, 0x42697357,
-	0xf03fbc5d, 0x6b6bdcfd, 0xf6ef48f2, 0xa0d823b7, 0x6fdd658f, 0x351e31d7,
-	0xbd81aed0, 0xf852eb6b, 0xb5c761f7, 0x3c068e57, 0xfffc7228, 0x7f47eb5c,
-	0xc6199da1, 0x4b4f844b, 0xfd0cdfea, 0x7ef9743b, 0x784af6bc, 0x590ac1e1,
-	0x1fad66bf, 0x6ccfbbe0, 0x2a508fec, 0x1c8ac7be, 0x6dacd6ef, 0x0de7d6eb,
-	0x276005d8, 0x39911aec, 0x7eac1f60, 0x85fb667b, 0xebaa5630, 0x5dea0b53,
-	0x1e43e7a9, 0x648fec85, 0xe4203d7e, 0x572cdfc3, 0xf47641f5, 0x57241181,
-	0x4b20667b, 0xe483fec2, 0x80796876, 0xf6073da1, 0xdbc21748, 0xd3e3fc7b,
-	0xef7b422f, 0x1b1fdfec, 0xb77be3a9, 0x37bb45ce, 0xba234e74, 0x2353ed0d,
-	0x4dadd00a, 0x71e80bf0, 0x7a480b8a, 0x7412ea5a, 0x8c330eea, 0x521c7473,
-	0xbe898526, 0x83ae0a5a, 0xf8f7ccb5, 0xe438425f, 0xde7932be, 0xf7c11ebf,
-	0xead2a10f, 0xffd825ad, 0x9da1856e, 0x44f4aeb0, 0x37da02d6, 0x30b59bbd,
-	0x5d25bbe1, 0x973e120f, 0x890f33ec, 0xe08f5fc7, 0x67e6de71, 0xdca3f69f,
-	0x90a228f8, 0x22d0684c, 0xbd40a76b, 0x9684c1a1, 0xcc8cab20, 0x1ce291bb,
-	0x06361675, 0xed0477e6, 0xdf638426, 0x7053c337, 0x814ff0de, 0x8b02db47,
-	0xab6e9f48, 0x4e2839b3, 0x56ff3a54, 0xc52b83c2, 0x5758788f, 0xe3839d5a,
-	0xe19acf34, 0xd808f8a2, 0x7cded871, 0x2fc8b7d7, 0xd75ae124, 0x3b45ae65,
-	0xb9ec0aa7, 0xfcee00a7, 0x7d6a6b8c, 0xd523c7c0, 0x3bb7e5fd, 0xb43e5e30,
-	0x266eff1c, 0x25368ba7, 0x2546fe10, 0xa25941f9, 0x8bb0b35f, 0x8d9f8ddb,
-	0x2be218b0, 0xf6e08d9f, 0xd8e1a5ec, 0xc39f2474, 0xda2a4f5a, 0xffe621d3,
-	0x2ccff704, 0xd0f7d0e0, 0xe479713a, 0x3fc9d569, 0xdcf4f366, 0x5fb6217b,
-	0x85fed1aa, 0xe00f3d69, 0x3d6bbdb8, 0xf04c75be, 0x2aefd601, 0xbd4f7da3,
-	0x3278a827, 0x7d70bcf9, 0xaabd9f7b, 0xd288fd1c, 0xa8fb5aee, 0x5ae6f49d,
-	0x2d7f7ea7, 0x69dfd3ca, 0x16c01f3c, 0x7e874d8f, 0x833efe96, 0x8f6b5dc6,
-	0x0ff5c5ac, 0xbda954ef, 0x607411d8, 0xb9be4bbf, 0x2bd22265, 0x504a4473,
-	0xed3d9a8f, 0xb618e90c, 0xb12fe42b, 0xe30c0279, 0xf3c3d3c4, 0x45f50534,
-	0x1d333d92, 0x5fb455fd, 0xb6bf90f1, 0x18c7f05a, 0x36d382a0, 0x3fb68562,
-	0x6fb0188f, 0x1ce3f95e, 0xbb4a1f0d, 0xfee364c7, 0x14ba9af3, 0x5b2df686,
-	0x42663f15, 0xc627bd7f, 0xea6e0ed0, 0xa69c6854, 0xb82d27d2, 0x93a5b96f,
-	0xec4877f3, 0x057f0033, 0xf18c5768, 0xa07b0aa4, 0x5839fb8d, 0xc448d8ec,
-	0x3d7c63f3, 0x12f78319, 0xad8cabfc, 0xf440f2e0, 0x86711167, 0x0257e126,
-	0x3eed484d, 0xef5bb48f, 0xf3b7fd16, 0x59bb8c52, 0xc455f989, 0xf062b96b,
-	0x2af2cb87, 0x91fa7df1, 0xdfe40cf8, 0xfa17d038, 0xb32ab697, 0xcc29fd6e,
-	0xf1a4eb6f, 0xbcc1343e, 0x056a4e40, 0x0452073e, 0x7d7657bc, 0x86e90332,
-	0xd7e232d5, 0x6a69aee6, 0x6fc78393, 0x4ec85ed0, 0xed89d96d, 0x929737d9,
-	0xc8f8c67e, 0x35fe786c, 0x1cb3e70f, 0x79d7f707, 0x61170eef, 0x48fd33bc,
-	0xe29fd6e0, 0x90a417f8, 0xd61b35bf, 0xe54199c6, 0x796ff41a, 0xa88bf959,
-	0xf533bd7f, 0xc647840a, 0x382e30f5, 0x38e48cab, 0x8a7c33d5, 0x3794177f,
-	0x0e34dc78, 0x116aefec, 0x711e7c5e, 0xd119c40c, 0x62e3876f, 0xdecb0f1c,
-	0x7e46a89c, 0x7be7d07e, 0xacbb4e90, 0xccd7c42e, 0x42df97ae, 0xc6d33b7d,
-	0x9aee293a, 0xd3c4b764, 0x3a4419be, 0x7a733bed, 0xd7083dc7, 0x947d0775,
-	0x8f6492cf, 0xb739715c, 0x93da3fcb, 0xec3f23aa, 0xec1b7212, 0x797f1e47,
-	0x9323ef9c, 0xf6efc8ed, 0x23b72faf, 0x777febfb, 0x17c3923b, 0x28f3c3de,
-	0x890f7ca4, 0xc35f5f7d, 0x5fd434d9, 0xaed23d2b, 0xd8f7ca4d, 0xba3df22d,
-	0xd0f7ce87, 0x0ff8f276, 0xee494186, 0xae222dba, 0x43cef7e5, 0x84bb87ff,
-	0x7b2bc0e4, 0x3748c353, 0x64ed3b67, 0x4b6e6997, 0x7b6ae114, 0x3cc11ada,
-	0xe0453688, 0x578890eb, 0x2c1c4459, 0x834744a3, 0x4025a0e2, 0xa4fc3f72,
-	0xd2abc799, 0x85ee8f22, 0x1ce1e37a, 0xd462cf11, 0x54d9f87f, 0x8a6377c2,
-	0x37fd8e9e, 0x8608fbfe, 0x183eaa71, 0x09f9d70f, 0x87bb707b, 0x7fbc5ae2,
-	0xe75582f6, 0x8968b3f1, 0x33b0f01b, 0x93bfedc2, 0x05a8a6a5, 0x8993bde6,
-	0x32f59f3c, 0xd9e7c5ae, 0x8f2461b7, 0x8231a0cb, 0xdcb5b2fb, 0xe32f545f,
-	0x1fb98755, 0xa5c45eae, 0xf45ece4e, 0xb458a608, 0xb8b52d29, 0xdd7cfb4f,
-	0xdf9ff234, 0x2a2cff79, 0xfd18d7eb, 0x3fd08bfd, 0x3f103c5f, 0xf9f77e96,
-	0xf6e167cc, 0xd0ff80f3, 0xbe8cf604, 0xfd46ab46, 0x775cc459, 0xc3d03ea3,
-	0x43177ab0, 0x1a2506d9, 0x19600af1, 0x7ad6d3de, 0x57bd7052, 0x6f4899b7,
-	0x7e4cdb85, 0xcbd24f7c, 0x67ae1eab, 0xbd70f5df, 0xe08ea803, 0x336cb238,
-	0xe883788b, 0x4533056f, 0xbc2934b1, 0x6ad2ed5c, 0xb2dfd287, 0x8b7336bf,
-	0xcdda1a6d, 0x77f226f9, 0xd7f16e7f, 0xa338bf91, 0xcda9d684, 0x96a6b2d9,
-	0x7d2f13b7, 0xa8078f6e, 0x1b8d32fd, 0x40cf4c96, 0x8782fa79, 0xf19217c7,
-	0x58ddb0b6, 0x2cc38e4f, 0xf5eb1889, 0xa736382c, 0x120dc798, 0xf420bf9f,
-	0x8aebe7c4, 0x167dbe04, 0xfe72bb94, 0xde38f22b, 0x1cbcf94c, 0x875d5f95,
-	0xe30a3074, 0x725845ca, 0x84cc2abf, 0x99751fe0, 0x48fa2147, 0xcdcdb782,
-	0x96bc29e9, 0x5aff21fb, 0xfee193f8, 0xf82593d0, 0xb8c5efd8, 0x42cbbd65,
-	0xf5f3e871, 0x1a64a497, 0xf5fdb7f7, 0x96feffbf, 0xaad7e7ef, 0x45c6bf22,
-	0x8bbe6972, 0xe2a4e5cf, 0xe7c51bdb, 0x701fb00e, 0x0ad56b1e, 0xbfd32394,
-	0x3479a0e9, 0x8239061f, 0x3de5ac71, 0x9bd7a805, 0x304a7bab, 0x5f8c935e,
-	0xf2935684, 0xef9bde0c, 0xda08fd81, 0xf18c6b0d, 0x55f1c1b8, 0x2666617f,
-	0xee4e7bee, 0xd7f5197f, 0x2fe93b7e, 0xad17bff8, 0x16cfffc8, 0x388b5c91,
-	0x2e316383, 0xee894a14, 0xda1171f8, 0x6a8edc31, 0x44eeb6ea, 0x5b7e713b,
-	0xff0f7c42, 0xef18deb3, 0xc8326b63, 0x8c3aceef, 0x4e1e1bcf, 0xfc506efa,
-	0x65d69daf, 0x0e3825b3, 0x10f41df9, 0x599c1de5, 0xbeb86262, 0x116faaf5,
-	0x7633a92a, 0xc67e7da3, 0x466bd7c9, 0x3e3fd4a6, 0xebfabfb2, 0x57d9d683,
-	0x6f5ceb82, 0x7ec4c162, 0x619d709a, 0x3ac51b7d, 0xe2fa799f, 0x8fe75c12,
-	0x825c5ff7, 0xdcd9bceb, 0x29be47ee, 0x41af0775, 0x32ba9cfc, 0xe615f640,
-	0x9d1f20ef, 0x94de3d2f, 0xfd378f44, 0x2eb1e8e3, 0x59321f31, 0xe3f4363f,
-	0x3d1fa8cb, 0xe50f3d16, 0xf59b7cc1, 0xfc49ea2f, 0x679fd21b, 0xe3ff92b3,
-	0xdd3f1ff0, 0xdd18f948, 0xb227d92a, 0xb05ac3bf, 0xc3a3ed18, 0x617d796f,
-	0xd3fef865, 0xb5e5fd85, 0x59fa30b1, 0xda40bee4, 0x78f2c997, 0x03cf98b9,
-	0x8cdffe99, 0x3ce21bf8, 0x20dc7fd2, 0x3e45b1de, 0x6eef76e5, 0xc7fdc7c5,
-	0x6e4fe49d, 0x85cf343e, 0x220fe2fe, 0xfcdc7fdc, 0x8ff93974, 0x8a5e4497,
-	0xeb193e62, 0x1fb85c56, 0xddfbb259, 0x9003cc34, 0xe7d85efb, 0xf9499fde,
-	0xeffdc635, 0x69939107, 0x70003798, 0xa7708fbf, 0xa416e27a, 0xffd866fb,
-	0xb360de61, 0xfd863f16, 0xd9187b36, 0xc65d9505, 0xef8ca0fd, 0x48580b6e,
-	0x56eb6eee, 0xb3af2822, 0x3ca2c12c, 0xcf2c6bd4, 0x80753a75, 0xfe9922cf,
-	0x077e9017, 0x5dfeeae2, 0xa7fe9758, 0x44e9ad9e, 0xe6663dbf, 0xdb3ca177,
-	0x4cf214ea, 0xdbf6f923, 0x7591dd87, 0x6fc37609, 0x584edc23, 0x34c1f322,
-	0xbd60d516, 0x1ff1cd16, 0x7946f5c7, 0xf7924d1f, 0xaf197589, 0x494585bf,
-	0x9eb1352f, 0xc4b0bcfe, 0xf9e392f7, 0xf4370718, 0x75ca5ac3, 0xe4dd93f4,
-	0xab9c51f0, 0x6356cfeb, 0x9bef987b, 0x55961f81, 0x5cafd00c, 0xcdbf4907,
-	0x6a1d1fc2, 0xe90ab138, 0xb8a5d437, 0xe8dd7f70, 0x08dbf4e3, 0x9bcc2ffb,
-	0xd677e64d, 0x1d13cc69, 0xdd7fff8e, 0xff9c77cf, 0x9cac3d7f, 0x5bf8c7fa,
-	0x3f97efdf, 0xfce5ef9c, 0x7fbeffa5, 0xe70add9e, 0x2579a4cb, 0xfd935bef,
-	0x79df72ee, 0x8bf0f2be, 0xf17c7c24, 0x70c7c60f, 0x6b2530f2, 0x7242fde8,
-	0x96afe35c, 0xf8e0ff87, 0x1e8723c6, 0xa881334a, 0xf6145258, 0x6fcebb72,
-	0x50cf1788, 0x371e7e1d, 0x453e7955, 0x9f5ddc72, 0x9ceee221, 0x5a7a5f9f,
-	0x126af5a5, 0x43a6e1f1, 0xdabe1f4e, 0xf14c58e0, 0xe9f8e4d9, 0x067fb652,
-	0x1c72512e, 0xb8f911b5, 0xa9e3cbf8, 0x3d396517, 0x56749f24, 0xc90a7984,
-	0x392f5a79, 0x4c111d3e, 0x32eaef58, 0x410c08d8, 0xcc2d36d7, 0x4f9e1232,
-	0xf4f6e2cb, 0xc89f224b, 0x05e7e16b, 0xfaa673ee, 0x35e31f71, 0x7ca77cf1,
-	0xd67a604f, 0x02ef9424, 0xc0decf9f, 0x4797804c, 0x4f249dcc, 0x1f0e4dc2,
-	0xc7e93fca, 0x10effd91, 0xa5f38b71, 0x19676ff3, 0xfebfbce9, 0x85fbe24f,
-	0xdaffbe92, 0xc016ddb8, 0x181f818d, 0x186befd1, 0x4c1a2a67, 0x33f5c3b7,
-	0xcb2efd1c, 0x459edc0a, 0xa44ff178, 0x94f3e6fc, 0xf195a92f, 0x622fe893,
-	0xfa3aac07, 0xfce26d37, 0x239f5b0b, 0xaabeebf6, 0xcd979459, 0x73c88fcf,
-	0x8fd9c336, 0x9ff9fb1b, 0xf5fd8fdb, 0xc8fd93bf, 0x9c7681dc, 0x7e69a9e7,
-	0xed5ffbca, 0x5f71f804, 0xc875a8f8, 0xdcf22cf3, 0x5df997c5, 0xcdc3f6f6,
-	0xb0ef6ae9, 0xe563ff70, 0x34ff93e7, 0x34fbf9f9, 0xdf0ea3f4, 0x7be4584f,
-	0x9e22fcc6, 0xf82576c6, 0x9e3143b7, 0x8092f7af, 0x447f3e57, 0x6cf4c5e8,
-	0xa75c51ff, 0x6cdb8f8f, 0x9e4c1d2c, 0x9b172e4a, 0x2f8a0e03, 0xbcf27734,
-	0x8ce5e697, 0xfa3377e4, 0xafd0cb4f, 0xbda18b38, 0xf8233537, 0xf57efc33,
-	0x9ab08edb, 0xd9f77e8e, 0xdebbed0c, 0xa9febce3, 0x6c73f83b, 0xa1ef2d0f,
-	0xecc74678, 0xaaef288f, 0xae9fcfea, 0x7824adaa, 0xb1e08fc9, 0x7cadcf1a,
-	0x0fe3c591, 0xbf43fcb2, 0x5f93f13c, 0x9e06e3ff, 0xf8f21d9f, 0x908fe85d,
-	0x3d54f17e, 0xe6a67e46, 0xab68dc03, 0xd87cf952, 0x9e88f3f7, 0x2b4c0f9a,
-	0xeb29ff47, 0x9da397b4, 0x072bf55b, 0xbe3ef7ed, 0x24f2972b, 0x0fc13dea,
-	0x2b3a3e51, 0x5da35723, 0xa0e3085a, 0xfef1fbbd, 0x6e11cbab, 0xa336ff29,
-	0xdfc61cff, 0xc7fa34ec, 0xd9e78d99, 0x4f9bdd2f, 0x4762cbfb, 0x6fec53f0,
-	0x11c39db3, 0xa3ce23de, 0x3279bf08, 0xcfbe4bff, 0x4e344d56, 0x146db7f6,
-	0x6172972f, 0x6d0599b3, 0xe4f203c5, 0xf22e9678, 0x635e444c, 0xa79e2cf7,
-	0x8f0eea22, 0x81f3bf31, 0x238f2bcc, 0xb4b3c73c, 0xe61f96af, 0x402f9418,
-	0x187e62fd, 0x9c5805c5, 0xe7a92dfc, 0xca3d1db8, 0x727a2165, 0x9c51df02,
-	0xed09e806, 0xb1e34bf9, 0x6b9e78e9, 0x52f44774, 0x73e1f3c4, 0x3693c226,
-	0xd38a35eb, 0xbc7c2ba4, 0x6b3df5e2, 0xc61fa2c7, 0xb865e6f5, 0xabbb7aa4,
-	0x353a511a, 0x4d9f9023, 0x52968cfb, 0xbffaaf1c, 0xf29f3ccc, 0x17f92a50,
-	0x291a0a3a, 0x6df7b29f, 0x4e3ce1ab, 0x77661972, 0xa8e4fe53, 0xbc505fae,
-	0x194079c0, 0x72762f32, 0xd6f083b6, 0xa0cd8e1c, 0x3d4b9b1c, 0x43b56724,
-	0xb538a2bf, 0x094356b6, 0x7eccdac4, 0x0b439e13, 0xefe460af, 0x32e1d31c,
-	0x8a157ae1, 0xc3be98fc, 0xa418987f, 0x0f8c8afd, 0x937e7844, 0xee1567b9,
-	0x3d15b4c3, 0x3d718797, 0xcd4db80e, 0xbc5fd865, 0x872dfc99, 0x4fd21952,
-	0xddf15761, 0xb85ea153, 0xb0f145c6, 0x296ee7be, 0xcc2aff24, 0xf310cc73,
-	0xf336ca2c, 0x9aa50ffe, 0x9b699f50, 0xd5470f98, 0x04d559dc, 0x875083f7,
-	0x3c8a467e, 0x453f1955, 0xa9ea143f, 0xd7e0ecf4, 0xffb63f30, 0x14b2d21c,
-	0xe3490e7e, 0xb2e712fe, 0xf3c71fb7, 0xfc2c3b3d, 0xc391e79c, 0xdf936613,
-	0xe0a6ad6f, 0xe6ee7c3a, 0x663794f9, 0x42e70c9b, 0x847ff006, 0x1d4756f2,
-	0x6bd705fa, 0xaff61630, 0x68bd3999, 0xd13b3d6b, 0x2d38b8bf, 0x97ba7948,
-	0x8a5545b5, 0x3d4eb99f, 0xec27ab50, 0x3d70b673, 0xef8fbcd3, 0x35f793cb,
-	0x6e5fa65f, 0x2dda36cb, 0x927ff5fd, 0xfe83f2dd, 0xfdc6fff1, 0xf3ee330a,
-	0xe497ed92, 0x3b20dd7d, 0xe1bfa93c, 0x8f9918ec, 0x0e303d52, 0xd29da7b7,
-	0xf21b0a4e, 0xe21daa75, 0xd8cda17c, 0x5c23e5ff, 0xbf995f34, 0x5f52b593,
-	0xf1fa7981, 0xd7f2301f, 0x70a23cc9, 0x09f7cf35, 0xee746c9b, 0x29dacbd0,
-	0x8b24687f, 0xd3f90a2a, 0x6d7ce87a, 0xc111e636, 0x47b2eb77, 0x99dbbf51,
-	0xf24a8d6f, 0x6e105752, 0x509fe63b, 0xeb646abe, 0x3ae71c22, 0xc7638d07,
-	0x308b93fc, 0x15bfc085, 0x06f4ebe5, 0x05c85f1e, 0x9bf48c7d, 0xa1d39a3b,
-	0xa1e78ebd, 0x99133cc8, 0x50f12217, 0x3b9bf02d, 0xca115176, 0xf04ab5c1,
-	0x99ae7151, 0x4e0dffcb, 0xec195e71, 0x79c0cf6b, 0xfbc63ee4, 0xf898370f,
-	0xaf376479, 0xf9d18c77, 0xf82fa079, 0x728ebb39, 0x2832779e, 0xaf09253f,
-	0xc9e53f32, 0xe411e0b4, 0xcbf3e497, 0xd6124e92, 0x6f47ce8f, 0xfaedc43b,
-	0xcd0b06ea, 0x35c96fa3, 0x5bec97e4, 0xffa86262, 0x9cadbbab, 0xdbc692ee,
-	0x51616756, 0xd88b57ec, 0xf5ca7e51, 0x16bb32ff, 0xfd14b5d6, 0x6b5a47be,
-	0x38053a2f, 0xa01ada3e, 0x74aecfb2, 0xf9d217aa, 0xa928b9d2, 0xf9f2d89e,
-	0xe60e5ab5, 0x140bc4db, 0xb7e79920, 0xea93347e, 0xb077f199, 0xcf16eafe,
-	0xc39034d7, 0x3be2637d, 0xffff7814, 0xdbc47f79, 0x19731691, 0x87a1f77b,
-	0x5f1d8666, 0x91fddf41, 0x9c71e725, 0xc4d3bd41, 0xc8c5567a, 0x5df4245f,
-	0x5e879725, 0x25ec8587, 0x653fc8af, 0x151f2235, 0x5f503b23, 0x714e5399,
-	0x0fd3077b, 0x8f3db0c4, 0x7682cf9f, 0x6395ffa2, 0x26da7fb8, 0x49e582e8,
-	0x184f54bf, 0x22cadbe5, 0x2fdf7d37, 0x23580f8f, 0xc7c63fdc, 0x0be9e37f,
-	0xf325be28, 0xe573196a, 0xf280b9cf, 0xfbf50c6c, 0xa61ce2ec, 0x73c7cae6,
-	0xc2cd2bec, 0x36f515ee, 0x8bc53067, 0x043e44f3, 0x2b8dee7b, 0x7c865bbf,
-	0xf7e0e674, 0xbb5ca347, 0x82fb02ca, 0xeed8e421, 0xfac72e1c, 0x0a358ecc,
-	0x0ce3577c, 0xfac2f08e, 0x773a95bf, 0xa8291e06, 0x82cd311b, 0xf8581747,
-	0x9af11551, 0x3dc4e829, 0xaee7c387, 0x77982809, 0xc7ced2ba, 0x7e6a0ccd,
-	0x9c10f73a, 0x70075ca3, 0xbcb854af, 0xc9d28f86, 0xd3d52a8e, 0xa3611cf1,
-	0x0aaad738, 0xe74971b9, 0xf5ed1526, 0x35beb79f, 0xe006d355, 0x878885fb,
-	0x78c8a2ff, 0xcbdca23e, 0xce5962ed, 0x900bf556, 0xf0ad56fe, 0x12f336bc,
-	0xf8e9ce7c, 0x9565b4ca, 0x557da798, 0xfa254b6a, 0x4f3d0769, 0x0965e787,
-	0xaf7f2b75, 0xc02f16d1, 0xed0be673, 0x8f8849c1, 0x7bbde7cf, 0x3b87ca27,
-	0x0778df73, 0x30de24f3, 0xaf91390b, 0x98eef588, 0x79eb069e, 0xf22dd8ac,
-	0x0f446c3c, 0x3f72c6c7, 0xdb1e7f64, 0xfaf28538, 0xe7e1ce66, 0xb165af49,
-	0x9ef81eb6, 0x3ed0159c, 0xd9117263, 0xde453391, 0x02b78cc5, 0x9817e869,
-	0x435c4371, 0x5d9c3a39, 0xacd79574, 0xc3f024f7, 0x7eb1bad5, 0xfeb1a96d,
-	0xfeb19f35, 0x1a7fc98d, 0xd97f589b, 0xf48d9fee, 0xf3c2bcf4, 0x3097c33e,
-	0x47bdd117, 0x32fda309, 0x715c99e1, 0x27e7970e, 0x77d8abfe, 0x5199333d,
-	0xdb3ed67b, 0x20373c2e, 0x68aad7fd, 0xb665e09f, 0xef7e0cc2, 0xb8bbea03,
-	0x3d1cf222, 0x0761d314, 0x3f71756f, 0x816bbc2e, 0xd3ce0e7e, 0x46aa3f89,
-	0x4e9052da, 0x76261cb2, 0xa552f239, 0x239aec8d, 0xb9e4ee82, 0x058d2aea,
-	0x8602cf30, 0x1be5839c, 0xe88bd766, 0xc87f0ea7, 0x69dbe718, 0x8a5be51a,
-	0x415b1831, 0x5d0487f5, 0xfff2911f, 0x57589a07, 0xef1840e0, 0x1e5cfaec,
-	0x74652e87, 0x656cfe5e, 0xdd25d509, 0xae01fe4b, 0x41a18d1e, 0xe927f445,
-	0x0b4ea7f9, 0xbf7a83d1, 0x34bbf849, 0xea590213, 0xb8807092, 0xc93d42c9,
-	0x7195fec8, 0x6c9b7cba, 0x7ef8fcd7, 0x7e75930e, 0xd44b2bde, 0xaa6a29a1,
-	0xf2fcfd40, 0x3b7f48ef, 0x879c417c, 0xe746cd25, 0xa3e38693, 0x767f825d,
-	0x4b91f125, 0xe8f89abb, 0x3b92cea7, 0x9c6bee08, 0xa5afd42e, 0x0cba9730,
-	0x2a23fd2a, 0x4fce3bf0, 0x474f8a6a, 0xed66f9be, 0x825aa9f1, 0x9bef869c,
-	0xc6a9f7f8, 0x7df0bdef, 0x69f7c246, 0xe0d97df0, 0x6d3b77ef, 0xec44d351,
-	0x21ef4aa7, 0xc9a5187d, 0xade6235e, 0xaeeff166, 0xa3b17911, 0xd47de0d3,
-	0x3cc6a55b, 0x67d93613, 0xa4e4fca3, 0x94ab92bc, 0x57c839e5, 0xba9adb57,
-	0x97bfa07b, 0x655e3ac5, 0x82e67e0a, 0x2dcf2fe7, 0x57fc8a39, 0x98688b6b,
-	0x8b2d77d7, 0xedc5c2ae, 0xc47c169b, 0xe1f24c5d, 0x6693e459, 0x03363835,
-	0xedcc67ea, 0x222d6fa3, 0x9bce79fe, 0x495e1839, 0xa45e1227, 0x493fa417,
-	0xf770c92f, 0x3bd7e7af, 0x3b6f1129, 0x4a5851d8, 0x16b18abb, 0xe7ad779e,
-	0x880bcc0f, 0x65ad8668, 0x2f35da34, 0xdc93092f, 0x00fdcab8, 0x9cbd65e5,
-	0x944ffc1b, 0x7e177567, 0xcbe1a052, 0x716379de, 0xc6f000df, 0x95e137fe,
-	0xbca0e3f6, 0x862d0fe3, 0xf8e1e3bc, 0x421b8e4c, 0xfcc550bb, 0x47949de4,
-	0xf0e39a1c, 0x109179e1, 0x5256c1e6, 0xc2ec8afc, 0x6f6e14e7, 0xb09b1587,
-	0x3f37cee3, 0xaf7b7199, 0x33dedfa9, 0x9477d7e4, 0x6e3bb873, 0x35fde5d5,
-	0xc79c5edc, 0x4b393db8, 0x51742fb4, 0xefc3ccbb, 0x86fdc9d8, 0xd58f4f1d,
-	0x03b05fb1, 0xe9607ec9, 0x322ccec2, 0x7f839bde, 0xde40d64a, 0xb73366f8,
-	0x7c99b75f, 0x62e79455, 0x9ce2f7e1, 0x318cfe91, 0xff64fc7c, 0x628e6e62,
-	0xd7f74f88, 0xc5fe4eff, 0x3f307752, 0x585bfa07, 0x4c502fe6, 0x33f71708,
-	0x1c3e7d02, 0xd6fe9863, 0xfeed1a32, 0x9bcb59ab, 0xcfa262a6, 0xcfa41ce2,
-	0xc59f4009, 0x9d1cfa06, 0x24e5c993, 0xb3e925c2, 0x934b2e9f, 0x1782caf3,
-	0xee1d3f60, 0xa3355fce, 0xf56ddcbd, 0x9e5abcf1, 0x072c9827, 0xa059e012,
-	0xaa3c7871, 0xc24cf04a, 0x39e19371, 0xa4493e1f, 0xf9c66ccf, 0xc97e3861,
-	0x59d858d6, 0x2f2fc031, 0x083583db, 0xacdf3f7f, 0x41a3fbe2, 0xa20eab70,
-	0xe46febaf, 0x2a509471, 0x4f1847d7, 0x67f181c9, 0x5faff189, 0xfaf0e9cb,
-	0xdd10b17f, 0x8451f802, 0x9f68b67f, 0x7944ddd5, 0xcc6bb354, 0x00ed1227,
-	0x13a9b719, 0x94f1cdef, 0xe605919b, 0x4bc634cc, 0xf1e26eea, 0x8b58eb9a,
-	0x7ebde119, 0x3a9fb18e, 0xcc13feb6, 0xc9bbab0b, 0xd3983cf8, 0x8b19671f,
-	0xc2a39671, 0xfc07d08f, 0xd3f4fc82, 0xdf0fc5cc, 0xf63bf40a, 0xe8156587,
-	0x6b32ba77, 0x504deec9, 0xf1b6f1ff, 0xd669ff54, 0x06f3bfb7, 0xa128efb6,
-	0xb9260d7a, 0xf9083ee1, 0xd54df511, 0xc114d78d, 0xa2ed47b8, 0x39f95bdf,
-	0xb04a6f02, 0xe7bc1663, 0xf28a389d, 0xbc846b21, 0xdbc85be9, 0xc9d0bdaf,
-	0xd66f5e53, 0x9358dfc9, 0x79f5efc2, 0x2bbffcad, 0x66b73f30, 0x3c57a894,
-	0x47eb1e3f, 0x1ee84f95, 0x8726de80, 0xce6ff886, 0x09da7ee5, 0x1c744aa5,
-	0x4326a5e0, 0xe7c4dff4, 0xd1e2b335, 0x9a8fe45c, 0x04cfde6a, 0xc5b5b4df,
-	0x2ce99ef8, 0x6d737bd5, 0x250f2869, 0x70e7b59f, 0xa9ed2cfd, 0x67fbe080,
-	0x8db6effc, 0x36037e80, 0x0c5387c5, 0xdf977e4c, 0xe7e0e55f, 0x22fe02cb,
-	0xd3bcfd0d, 0xb37f3cfd, 0x0722b6da, 0x0f5fe7f7, 0x5e712a5a, 0x51f95b2e,
-	0x27d26fb4, 0xf9449b4f, 0x466636be, 0xdf74073d, 0xf1787c41, 0x48690527,
-	0xdd230e6c, 0x259aba4b, 0x48c6bde9, 0xdbafc0d7, 0x5cbf3272, 0xdae81b5e,
-	0xc3d7403e, 0xd700b9d9, 0xa9ae098f, 0x3fd5fd46, 0x265f124e, 0xbc9c3b8f,
-	0x7944bfc0, 0x275f003a, 0x661e5ff1, 0x7f2315c5, 0xecfe4bb6, 0xa62c3842,
-	0x29b39d18, 0xe9e37c54, 0x7630ea60, 0x1f2f8486, 0x8315ae7d, 0x4d3fc2e1,
-	0xcffc7fda, 0x3cf2fb83, 0xf9df0ed1, 0x5c00c659, 0x242bfe30, 0x7871570f,
-	0x5c2d2bb6, 0x5c7b08be, 0xe59be7ee, 0xf38cbb7c, 0xe7e14aad, 0x77e8bdde,
-	0xf97bdf21, 0xcfb87ef8, 0x7ce41d63, 0xcf6f4242, 0x169c05b1, 0xee75db98,
-	0x1b9fa27a, 0xb469f858, 0x8339968f, 0x74f117ff, 0x843e14c4, 0xcc859cfb,
-	0xa057f14f, 0x1272778f, 0x6f090dec, 0x879a9e32, 0xf3c9a791, 0xc0cfc649,
-	0xbec8c5ba, 0xfad8e793, 0xf39e7be7, 0xc7897694, 0x6577f462, 0x8654ff08,
-	0x452147f0, 0xc99e7ea1, 0x2fb87c52, 0xc853ee98, 0x6cc998be, 0xd6679724,
-	0xe19e7d72, 0xd487f6e0, 0xc7f1c3fb, 0x92339715, 0x991b3357, 0xe7c73738,
-	0xd9874c95, 0x2c0ee7ac, 0xadf4da67, 0xd1ef900b, 0xe007d14e, 0x7ee0e99f,
-	0x215cecec, 0x24cf583f, 0xf5fdf3d4, 0x67be7a41, 0xe49fca12, 0x9e66c9fb,
-	0x8cd2fee3, 0x99ca8c73, 0xa12777be, 0xeda8cf9e, 0xcc728499, 0x737bf2e9,
-	0x1fdc0d27, 0xd1c78c98, 0x871926b9, 0x4cfa2f3b, 0x3f191fe6, 0xc706736b,
-	0xcfd238e2, 0x55894671, 0x1e154be1, 0x583fe897, 0x76ec7484, 0xff434d15,
-	0xe81b1cc5, 0xcbba1823, 0x1730bc15, 0x008fede9, 0xf10e6e0f, 0x75e3c055,
-	0x347bc135, 0xe1e12c3e, 0x2b878136, 0xfb3d5e85, 0x89f14ab0, 0x43e97f1a,
-	0xbd084218, 0xe2116662, 0x45e93f57, 0x59d8bf79, 0xf8a2a030, 0xb24e63fe,
-	0x5abf1633, 0xb195f14f, 0x4f4c4c5b, 0x22e393d0, 0x327b8629, 0x30cbec26,
-	0xcce82fd4, 0x617fbc35, 0x7b4328d7, 0xa1bc7479, 0x2a57a2fd, 0xb149f50c,
-	0x2ff78629, 0x50daab7e, 0x1ae7a4bf, 0x3f53fbc3, 0x83a86d98, 0xde70d0c6,
-	0xd8559f7b, 0x65f79836, 0xbe196ff1, 0x19b6cdff, 0xf3bc60af, 0xb2f7d8a4,
-	0x0a563fb0, 0xe9205878, 0x637cdcf6, 0xaa25517f, 0xf3df2154, 0x79eb05bf,
-	0xc034f6be, 0x0bbf625c, 0xc4f68ddb, 0x7ac62de2, 0x55a6f743, 0xe7071b28,
-	0xe354b479, 0x79c93955, 0x79ae351e, 0x50cfa426, 0xe317d82e, 0x62ec1110,
-	0x8e1b33cc, 0xfd6cbfcf, 0x2fe8d84b, 0xfefe7f5b, 0xf5d90b16, 0xaa7d5f8b,
-	0xac8f0a2a, 0xdbfae35e, 0xa7fae375, 0xdfd71a96, 0x7fae33e9, 0xfae364fa,
-	0xf5c6fdbb, 0x5c6b511f, 0x7180ccff, 0x8cebb3fd, 0x34139feb, 0x06c8ffae,
-	0xb7e7fae3, 0x70bbd718, 0x8b3d7199, 0xed0d4bc2, 0xe52febc9, 0xdb9af165,
-	0x7a01ef8c, 0x2074094d, 0xa04168e9, 0xc677f281, 0x30cf7fb4, 0xc03d324e,
-	0xf744d1be, 0x6e3ec1bf, 0xf4fe729b, 0xfc8ad201, 0xf1f4c9bd, 0xeec2b96f,
-	0xfa017414, 0x0ae513a8, 0x614f17d8, 0xd8563759, 0xeda181fb, 0x12bf290b,
-	0xbee279f5, 0x36b93878, 0x7d894f48, 0x0a7ab0f2, 0x81f6c9f7, 0xf470f27d,
-	0x8fb31c7b, 0x4f5a8ec8, 0x5d1ba57e, 0xf14f8e1c, 0xcfe825d1, 0xf2f4827d,
-	0x32700071, 0xe71c7bc0, 0x4f1fe303, 0x8dfe4099, 0xd928b36f, 0x1982ffed,
-	0xcdd83096, 0xe2ada898, 0x953a4f3d, 0x2f6f42f5, 0x858ffe14, 0xb95be0f6,
-	0x9851efdc, 0xc5e6e385, 0x7b14bce8, 0xdd79c46d, 0xe3027123, 0x4f782008,
-	0xca011c61, 0x9ba73b5e, 0xf8ae52d3, 0xc049ee99, 0x4ae9fce7, 0x6ab5d929,
-	0xcd3de50a, 0xfd2141bf, 0x787fff34, 0x2cfa1719, 0x4cb95cb9, 0xd85db3e2,
-	0x482edc03, 0x149ac3c7, 0x07416277, 0xc2e7cde1, 0xb8fe8675, 0xfc47ff1f,
-	0x0ae3cd7c, 0xd06726d3, 0x675a3331, 0x0f3c6f5c, 0x9c38daa5, 0x0d999b8f,
-	0x058139f1, 0x57bc0ec9, 0xfbc6d103, 0x7bfbcf1b, 0xd3fa1463, 0x7cfff554,
-	0xcfe306ad, 0x9ffa2e38, 0xfe863e1d, 0x63ebd566, 0xf41abfe8, 0xba14c0fc,
-	0xcebfa324, 0x87f87bf8, 0xc27e9178, 0xbb2f413c, 0xbdfb8c9d, 0x2386fc92,
-	0x98c09055, 0xe7e663bf, 0x16dabdc3, 0xe63c9fbe, 0x984d635b, 0x37666337,
-	0x32fbe79e, 0x6df3087b, 0xc7e4274f, 0x790cbac3, 0x3cb4e98f, 0xb657efae,
-	0x71865c36, 0x07115ea2, 0x7835a7bb, 0xaab7ae19, 0x0e2f28f9, 0x277257ef,
-	0x40f16f7c, 0x6a9f027b, 0xdd43068e, 0x5e1008ec, 0x10b6b556, 0x3dc598dd,
-	0x6ef3ab50, 0xfc130573, 0x148e1712, 0xcc2d86f6, 0x984c595c, 0xc1f7f0c6,
-	0x55f38674, 0xc4e9da5d, 0x0bd5a87d, 0x2bca25fd, 0xfa2590ad, 0xb6b4d7ad,
-	0x94abdc10, 0xb33b1060, 0x3b51668e, 0xe1aadbe0, 0xbe785459, 0x67922af5,
-	0x3e6de716, 0x3867f7bc, 0xdabd59fc, 0xc87289e7, 0x8728d23f, 0x5db56fee,
-	0xd95af88e, 0x93c68cba, 0x756f6b78, 0x8df58e5d, 0xbed15ead, 0xb54dda82,
-	0x71f482ba, 0x8621681a, 0xc7ad1671, 0xb03d7189, 0x03c61933, 0x045b5ecd,
-	0xe1eac899, 0x05a3b2f0, 0x5d731f44, 0x8df4061c, 0xbc7d03e5, 0xfb4cccb3,
-	0x1df3dbd3, 0xafedfef4, 0x0fd1798f, 0x1e01607c, 0xf98aff51, 0xf0238ff4,
-	0x88721167, 0xf200c169, 0x23572595, 0x6b86747f, 0xdfe3ad36, 0xbbc49fda,
-	0x1f28cec5, 0x20ef92d4, 0xe17cebbb, 0xf7148d0c, 0x27bc0950, 0x44f00fe3,
-	0x8176f472, 0xe2efdba7, 0xefdbbe7e, 0xcec79460, 0xd55fc196, 0x148d5d00,
-	0x059b25f2, 0x056f6ca8, 0xeb8252c1, 0x0b416365, 0x49d675e8, 0xbfd1db2f,
-	0xcd7eed83, 0x4deaa18d, 0x58599e35, 0xaa7c9c6e, 0xbef1d91d, 0x618b3f4b,
-	0xc474be89, 0x4581ab97, 0xc51fccf0, 0x1d783d8e, 0x89a7af35, 0x5e3ab4f6,
-	0xe9ed174f, 0xf7cf5e01, 0x20d4a93f, 0x97f14960, 0xd5c6477c, 0x2dbe51a3,
-	0xb27cfc60, 0x3b60e7b8, 0x91c2f213, 0xdb06ab31, 0xbe74626f, 0x50ffb640,
-	0x4e38e7b4, 0x394629ac, 0xfdf8c73c, 0x6c878156, 0xe9f689c7, 0xb6319f14,
-	0xa64af8cb, 0xf42bece3, 0xfdb1997d, 0xd3bdf141, 0x1d363671, 0xc71b47db,
-	0x53da20df, 0x08ef3c1d, 0x473f21c4, 0x15efda2f, 0xc76c76ed, 0xed8d4bf1,
-	0x2bf8c56b, 0x43ad0095, 0xf8899f3f, 0x9d568ee4, 0xf67cc9ea, 0x7e0cc8ea,
-	0x99f0598e, 0xf21b196b, 0x23abfcdc, 0x9a4cbe79, 0x0ff7e3de, 0x7b650f21,
-	0xb8a34b86, 0x10b5eaaf, 0x421d591d, 0xec3e088e, 0x8b4a2397, 0xf717138f,
-	0x3d197f97, 0x8e7ee103, 0xfe00acf2, 0xbef39e90, 0x04c16263, 0x98db9679,
-	0xef0982c2, 0x1864177b, 0xe53759ea, 0xccf7de1a, 0x77686519, 0xb4378e54,
-	0xf13e58b3, 0xae826dc7, 0x0c2aca52, 0x02bef2ed, 0x923e73a6, 0xf479b576,
-	0x677bc314, 0xa474f54b, 0xcb57d3ed, 0x367cabfb, 0x39b70b94, 0x1f236547,
-	0x3275a4fe, 0xef20df1a, 0x8974a26c, 0xc9474bd2, 0xa2eab656, 0xc7f54a5e,
-	0x7aaf3cdc, 0xd78fab65, 0x6f9d188b, 0x4b5ad95e, 0x2f81c7f5, 0x56d7fcb1,
-	0xa07b953f, 0xfb0e160e, 0x43aff411, 0x7fa13b3f, 0xfd023fac, 0xfa1db963,
-	0xd087f2c7, 0x856fb63f, 0x10feb17e, 0x83e585c0, 0x7f3e0fd0, 0xfac7fa00,
-	0xd500d6a6, 0xa3ad6bef, 0x20d686fa, 0x36b6f795, 0xadb5f3d0, 0xdd5f542d,
-	0x7bca8cba, 0xae54c35a, 0xed435d6c, 0x1f37a116, 0x1f1fe713, 0x7dcfc69b,
-	0x467faf27, 0xeed5f29e, 0x4504a8bb, 0x93c8655e, 0x7dc3c8c8, 0x2f31a775,
-	0x7047f110, 0x931e39d8, 0xe02b18e1, 0x2b62cf18, 0xa0dcb952, 0x2e98eb38,
-	0xc0a9dddf, 0xf85b23a7, 0xc57517ba, 0x81a73da9, 0xcc56378f, 0x2cc27993,
-	0xef1f8aaf, 0x957af7c5, 0x8f2a7558, 0x831f9337, 0x553f0179, 0x9133dce2,
-	0x7084c479, 0x7f419369, 0x1fb3cc27, 0x270e6e5f, 0x78286de2, 0x7c78f22b,
-	0xe4ecad43, 0xb6d49bf7, 0x52cd9147, 0xbf742dfc, 0x102ead89, 0x04f4a0d5,
-	0xc24f7482, 0x603373f8, 0xed720593, 0x874ce5dc, 0xb8d1af32, 0x505dcaff,
-	0xa8e7d861, 0xfd3236e7, 0xccb7e822, 0x194a4fb8, 0x3be19b7d, 0x0cf7de5b,
-	0xddcf16ed, 0xb7f9f686, 0x22f2ad14, 0x8a32473e, 0xafd7593b, 0xd7003960,
-	0x044d8ec2, 0xbde05057, 0xfdf9d157, 0xefc5fbed, 0xfffb0844, 0x2f812ec7,
-	0xd7da7adb, 0x6af3758e, 0x84d87a49, 0xa7e3e7fa, 0xee8e49d2, 0xfe44c47d,
-	0x622c71ed, 0x01337942, 0xbf6c48cc, 0x56726f00, 0x151ccae9, 0x574ce5eb,
-	0x8b117eb1, 0xec08bed3, 0x17a43aff, 0xb11fffb0, 0x7e4cfd43, 0xbf3cc7f0,
-	0xba7a4a2b, 0x8967ac44, 0xd16d07dc, 0x73c3fd92, 0x635fc8f3, 0x26d6073c,
-	0xdc2b01f6, 0xef18d955, 0xff261ded, 0xd6fde9ce, 0x1eb005d4, 0x2a3a9cce,
-	0xba0df3e5, 0xd173c869, 0xbf2abecb, 0x623d016c, 0x086597e4, 0x9fca99ff,
-	0xaabba167, 0xf89c7479, 0xe52ccda6, 0x728e9e98, 0x4beea06c, 0x3ba2bb27,
-	0x89a3f087, 0x1adbd9f5, 0x3900fca4, 0xd377ed4f, 0x560f985c, 0xf74ff222,
-	0xb53adeb5, 0x661f2126, 0x52dfa0b7, 0x3d45ab16, 0xf2665a5a, 0xaf27a845,
-	0x1f617fc1, 0x73c7eedd, 0xf3055afa, 0xc71e18a1, 0xbabce9da, 0x794a85f6,
-	0x4b91da40, 0xb0760e98, 0xe16511c3, 0x997e81b2, 0x477c83f0, 0x5ccff5c8,
-	0xad0f3435, 0x3e47da40, 0x33ecddd4, 0x74863f87, 0x998759f7, 0x6309e5b3,
-	0x9183a97b, 0x6a545b9e, 0xa60ae889, 0x3dd3b423, 0x850eda8b, 0x1c2115e5,
-	0x50f3bdd3, 0x254c1f8f, 0x52dd4dba, 0x7bc35745, 0x79f5c14c, 0x1e99c700,
-	0x1a49a0fd, 0xd35ef057, 0xb42ecb04, 0x5e22c71b, 0xa5d19c70, 0x6285c784,
-	0x575afbbe, 0x159e9e10, 0xefcb68f3, 0x87873bc7, 0xcf78fcf9, 0xe90ea2e9,
-	0x73ce31bf, 0x37f56543, 0x95c6def0, 0x74d85531, 0x33ae7c46, 0x53ce26c7,
-	0x3802e006, 0x5538459f, 0xbffc9b84, 0x8f4d7e7c, 0xc819bf70, 0xbb8a5ab1,
-	0xc4b1324e, 0xa32cabb8, 0xc8cdfe42, 0x4ebc1173, 0x0ba9dcef, 0xdfac4a2e,
-	0xb8fd7444, 0x761fe7c2, 0xcd2f3c6a, 0xfd13d7ef, 0x7ee4ebc4, 0x487f9c59,
-	0xdff6f011, 0xe79e36e3, 0x6c583a61, 0x0d2de60b, 0x25fe1fb7, 0xc4a4ca2e,
-	0x18e830fd, 0x649d5718, 0x759f3ca3, 0x7f4b8f32, 0x337cc743, 0x8afcf12c,
-	0x6ae9d04d, 0xe4af31a7, 0x77b71e5c, 0xe8f589ce, 0xc6be71b3, 0x567964b8,
-	0xdd17bdc2, 0x91ffe4f5, 0x6ebecc71, 0xfd2e0f9e, 0x09044b6b, 0x78e51df4,
-	0xa5587be8, 0xee92e5f8, 0xa17df96b, 0x7ba01e87, 0x1d2fa156, 0xbc5ea1e9,
-	0xe8c6bf5f, 0x3bb059ef, 0x1f452ab0, 0xc45a57ec, 0x48d7e4c2, 0xfb2527f6,
-	0x279b7e91, 0x563e69f6, 0x93ca718e, 0xa58f8beb, 0x88a67ee0, 0x91dbb9d1,
-	0x8f7493ea, 0xedfb5831, 0x2b294f78, 0x24f4f7e3, 0x0525fbaf, 0x3ef3c216,
-	0x1c63aeb9, 0x37d867e4, 0xbefff389, 0x7d7ecf17, 0x96f3f40c, 0x81ce18ae,
-	0x099ba5bc, 0xae81e38f, 0xac64ecb1, 0xa0fba876, 0x5f4df3b2, 0xa5c0bced,
-	0x68d7dfc6, 0x9639eaea, 0xcbbc93aa, 0xfa7807ca, 0xad3efd8e, 0x4e27f88c,
-	0x575107bf, 0xb841e1c4, 0x7ecbfcf1, 0x137327d3, 0xbe7c60e9, 0x7c83edc6,
-	0xbf9357d3, 0xceb84635, 0x7599bd94, 0x1c6b870d, 0x3d1bd5c2, 0xb7689591,
-	0x0ff6b848, 0xa5fabf73, 0x934f155f, 0x0120fa8d, 0x12ff534f, 0x865bf69e,
-	0xc0966786, 0xf28e4fcf, 0xb70642fb, 0xd5fd457f, 0xccf78461, 0x51ebb163,
-	0xb3bc023c, 0x53de7f08, 0x15331459, 0x14acebf8, 0xe42959f4, 0xa8ce8f8e,
-	0x17dbd0b0, 0xa75e7e53, 0x7743dbc6, 0x79e08a2e, 0x0b8bdf02, 0xe0dfd10a,
-	0x7ba56e3c, 0x7949429e, 0x2f5cb222, 0x573fb1e6, 0xab0f1219, 0x78bcb9f3,
-	0xd4f9b5f1, 0x596fbddf, 0xed83ca19, 0x5ef5df22, 0xef0da757, 0xc47895ef,
-	0x2194057a, 0x2a117c4b, 0x3f2b7bba, 0x218ee9b3, 0xf1f133c6, 0x1be24bee,
-	0x572c9e39, 0xbb7297e4, 0xe2aa3954, 0x2efb8739, 0xd9ee937d, 0x2352afba,
-	0xe337fb99, 0xfe127d7f, 0x7d666fa3, 0x8acbd39d, 0x2aa3f47c, 0x037da5ef,
-	0xfe2521ea, 0x9fc432b3, 0x0ff34825, 0x3b656dbd, 0x6a78c195, 0xe72bf414,
-	0xe12fe727, 0x80b65e76, 0x7ae099ce, 0xc5abe020, 0xa44f52fb, 0xf387bd0b,
-	0xa9713d22, 0x4c89cfc6, 0xef5d68d2, 0xce853c9b, 0xf917ecf5, 0x2c4bf114,
-	0xc32efe43, 0xf76f0233, 0x0c45fb9e, 0x770da9ef, 0x055ee99b, 0xbf78f5a6,
-	0x7a147409, 0x9a7ba35d, 0xf16a9e81, 0x5f17a8de, 0xfb869b3b, 0x66f903e8,
-	0x3e40fb82, 0xe77d8797, 0x6f3a5ad4, 0x2e67daf3, 0x9ffe8135, 0x5d8557ce,
-	0x39e18b12, 0xfc158d9a, 0xd84380dc, 0x4ed78e01, 0x8efc2035, 0x2ab3dfc9,
-	0x4f767a09, 0xdbbe95be, 0xf9678968, 0x48740e30, 0xdfee5165, 0xfaeffba1,
-	0x38ba0bcf, 0x8f2b9a1e, 0xe8e09d92, 0x3de2f7e6, 0x5c13af9d, 0x7841f708,
-	0x33ee329e, 0x57b63d57, 0x06a378c2, 0xf8ba77be, 0xe24ca67a, 0x77dcd0f7,
-	0x785dcfe9, 0xc2ba5eef, 0x4be8fee8, 0x3906cc0a, 0xd7c45f5e, 0x1632b3a1,
-	0xe5fc851b, 0xb6af28d2, 0x0d9b7a33, 0x17c97aed, 0xf4a947a3, 0x97916add,
-	0x29727abe, 0xe3a499f1, 0x57c105b9, 0x02366e91, 0x76493c5f, 0x9d302c4e,
-	0xc72ae3f0, 0x95c7e3fc, 0x3fb71d58, 0x2fd42e2c, 0x819326a5, 0x380b8adf,
-	0xec12c8dd, 0xee77b252, 0xf52cb410, 0xc6c45b7d, 0xb7ffbf30, 0xa3a566e7,
-	0x2796da5d, 0x0dbf3ced, 0x095db5f1, 0x38e117a4, 0xbed2a5ff, 0x4ed7c5ef,
-	0x6db8e034, 0xdbe42f30, 0x58ea7e7b, 0x9b49f68f, 0x2a7c4fcb, 0x26dcd7c7,
-	0x9fbc1eb1, 0x2bff16fd, 0xbb8c6fe8, 0x47447df9, 0x43635ca6, 0x4cf787fa,
-	0xad7bcfd8, 0xd81a0bf8, 0x07f90d4f, 0xcf66ba16, 0xb116efc0, 0x6bb42ae0,
-	0x86a87517, 0x11ee177b, 0xb9e162f2, 0xd84d1614, 0xfc9c2c1f, 0xb6373a2d,
-	0x8b1a5cf0, 0x8f75bd82, 0x8f7d1738, 0x0ac45738, 0x443b3d38, 0xdfe515e9,
-	0x24bef7cc, 0xcbf995bd, 0xdf39f3bd, 0xb7e802b3, 0x14b1e949, 0xa71b10c1,
-	0xebce9efc, 0x62ead7bc, 0x780492d1, 0x0473cd07, 0xd38c268b, 0x1b39deff,
-	0x7d6067cd, 0xcc0efd39, 0x787841d7, 0x784bd5af, 0x91ffbe1c, 0xf40e3c06,
-	0xc780ca3f, 0xd097fdc1, 0x96b5eff8, 0x13ff497e, 0x375fe986, 0xefd03fc0,
-	0xf7b71a68, 0xa71ffcc8, 0x891ddf02, 0xf9edbdde, 0x331dfc4a, 0x017efd2b,
-	0xa6aceaeb, 0x338f8473, 0xe77a673a, 0x83bddfe1, 0xee779af9, 0x8c70f8b2,
-	0xae7c733e, 0x333d086f, 0x78c2b99a, 0xc72c979f, 0x7cd31417, 0xb4db9f92,
-	0x32f30b88, 0x0b9aa56d, 0xc6d11f7f, 0x71bb9162, 0x236952df, 0x42e32739,
-	0xe53fdfb2, 0x3b3cf2a9, 0x6f7907c9, 0x979112cb, 0x5e08ec57, 0xd4beeb81,
-	0x13fcded4, 0xd283f6f8, 0xcc373a36, 0x33f69b98, 0xe1a36e32, 0xa315bf2f,
-	0xf0c0305f, 0x7a13cdfc, 0xf77e0670, 0x18271043, 0xd82f51c7, 0xb5bcc41d,
-	0xb8df620d, 0xfaf31ec1, 0x0de6e412, 0xb357da05, 0xe893da17, 0xf72fd276,
-	0xdedd3946, 0x227e8050, 0xfcc4f635, 0xedb7cc22, 0xe976f711, 0x55778a16,
-	0xfefba31e, 0xff7dcbe6, 0x8ebce49a, 0xd1da377c, 0x8694ce32, 0x6b687779,
-	0xbef7e46c, 0x7af2a7d5, 0xa08c7ffd, 0xffb01073, 0xf9432d49, 0xfee55fb2,
-	0x3adf1120, 0x67d0e62b, 0xf94058db, 0xe41f22f7, 0x744bf76c, 0x35d9e4af,
-	0xebfd6863, 0xdd3ef85f, 0x973fb70b, 0x43beb1eb, 0xf563d24e, 0xde155f56,
-	0x973fb85b, 0x5a9dabdb, 0xc122ad34, 0x579d5d7e, 0xe3f9f24d, 0x894c6335,
-	0x0aef8ff1, 0xfa51b079, 0x1578b537, 0xb8f9679e, 0xd233fa32, 0xf4ec07a3,
-	0x83a6513b, 0xfba2abbf, 0xe95a372d, 0x0faa0177, 0x875cdb8e, 0x8d34c3fb,
-	0x074d91f2, 0x99cf04ed, 0x2d7efc75, 0x5de516fc, 0xf491c1d3, 0xa9f556fb,
-	0x6c27ca71, 0x6095f14a, 0xe0feafdc, 0xffd7ba54, 0x057186e4, 0x644eff28,
-	0xaf7405ea, 0xf43c06f1, 0x6343f509, 0x17b5f3f9, 0xe75579d3, 0x50e0d4c6,
-	0x8fa9107e, 0xdaefef92, 0xdbde5b9f, 0x6719f885, 0x7dfca1f3, 0xb8f1f14f,
-	0xd9f12bef, 0xf915c53a, 0xd77ad2f9, 0xbc7dfa69, 0x6f778efa, 0x43dcf462,
-	0x73f72b74, 0x0bd5e3c9, 0x12dfb57d, 0x4bbf8b9f, 0xe052bf56, 0x624efc5d,
-	0x7e9ca9bd, 0x7de24faf, 0xb73dd263, 0x24fd084f, 0x69af93cb, 0xd8205f74,
-	0x1fe80511, 0x4ad8793a, 0xe3727674, 0x2eaf3a04, 0x9c07abc7, 0x4f2f80b8,
-	0x7113e864, 0xf2169f5d, 0xdf257eaa, 0x30e7caa7, 0xe77f0c7e, 0xa5487e30,
-	0x573eaebc, 0x92e30d3c, 0xef593df2, 0x4ab74f9f, 0x3fb597bf, 0x6f5a45f7,
-	0xf48627a0, 0x49c17a64, 0x82f43a7a, 0xe7ae1775, 0x8c2c95c7, 0x5bf0cffe,
-	0x8ec7f7fc, 0xfd92b21c, 0xef9c77dc, 0x9fdd076f, 0xe01788e6, 0x17a1a1fd,
-	0xeb1c9246, 0xe0ef8fcb, 0xdf9db6f6, 0xf046f8ab, 0xcdff1162, 0xe611f711,
-	0xf9f79da0, 0xed147b21, 0x9e29283c, 0xbdbb6610, 0x2a70fcf4, 0x940fff43,
-	0xca63cf14, 0xeefd2f01, 0xdf176b0c, 0x3bfbe8c7, 0x5163820b, 0x0c59df2e,
-	0xfbf03bfd, 0xe7def453, 0x521782a3, 0x5cb18a0c, 0xf52e5e31, 0xa42c1f9b,
-	0x5e67cae7, 0xed2a7bfe, 0xed463da2, 0x62f06b21, 0x9cafc79a, 0xf310e76c,
-	0xeef7aafc, 0x41182d1d, 0x06e128eb, 0x98dd933c, 0x05b3978c, 0x3b7bf126,
-	0x74c91f1c, 0x5f9ebfd9, 0x5ffa1f02, 0x21f6bce8, 0xc6eb8ebe, 0x591cb859,
-	0x63ec813b, 0xc86296d6, 0x88715b9f, 0xbbd0c3df, 0xdceb49c1, 0x843ff667,
-	0x86fe28fa, 0xed7bf199, 0x3f4022c0, 0xf9a1e4c5, 0x4f9123e5, 0xcf2d64bf,
-	0xd1e8fbb3, 0x39e60bf7, 0xfbf25cf0, 0xd2c97386, 0xa49d085f, 0xe1c63fa1,
-	0x97e6d3d3, 0x255d7b71, 0x7aeff8f8, 0xf4eb346d, 0x0de16bbb, 0x711fc8e3,
-	0xa41fa2d2, 0x775b87df, 0x4ae90981, 0x77f2172d, 0xbc9f9f13, 0x7bde4b2f,
-	0x8a9f8c95, 0x7f9262c2, 0x33782c4d, 0x827ea1de, 0x61c259e9, 0x91fff746,
-	0x6984df7b, 0xe29f9a88, 0xf485acb6, 0xf67be0c2, 0xbbf25f2c, 0xf5bbff6c,
-	0xf42b5c2a, 0xd38795ef, 0xe07eaf50, 0x3a46fbe2, 0x5d7a8f7d, 0xc36cf3e5,
-	0x83af300f, 0x4e14a605, 0x879276a2, 0x5dbc281f, 0xf341b9ca, 0x7ec17a47,
-	0xebe83df0, 0x7fee429a, 0x710cae63, 0xc16c2bc8, 0x9fa94d3c, 0xc2668a42,
-	0xdca7f373, 0xe3d21a7a, 0x19c5b5a9, 0xc60f302b, 0xda2567ad, 0x8ca3a1d5,
-	0x78eb8bce, 0xf8c5f8df, 0x89fe32fb, 0x9fdbf7e8, 0x243bf461, 0xb4e4f3c3,
-	0xed89b99e, 0x9eb90a73, 0xf6285f9b, 0xe44c8599, 0x8de32657, 0xb162fbaf,
-	0xf0796aee, 0x2687da72, 0x4b78b7bd, 0xa487a0ba, 0x7fcfede7, 0x1ea0f297,
-	0x4913de36, 0xef185fb1, 0x612c5783, 0x532c42e5, 0x61bdaf28, 0x0d739713,
-	0xb92cceaf, 0x5ee9d78b, 0xef3b6985, 0x59e3dfa1, 0x12caebb0, 0xad16e5c6,
-	0x05c7a483, 0xb412fe05, 0x555be2e3, 0xc345f217, 0x51e09516, 0x56d73ecd,
-	0x8b7a7e78, 0x06bbec99, 0xbce9cf01, 0x9bad1a60, 0xe00b34c6, 0x4c16b4fd,
-	0xab75fb23, 0xa4a1ddf8, 0x6f7bc079, 0xe043156a, 0x99d7c6c7, 0x043c53f0,
-	0xa261bc1d, 0xbf805a75, 0xec70890b, 0x79bfc854, 0x33783f3a, 0xfec14fd6,
-	0xabe9cf1f, 0x7dd0969b, 0x3ef8c936, 0x7d120b6d, 0x91f3162e, 0x471e4cf8,
-	0xf10fb3e2, 0x2bd2f689, 0x85ef4853, 0x6291541e, 0x9fdd8bd9, 0xda7cbed2,
-	0x99df2ba1, 0x8137cf8a, 0x9ea3a2dd, 0x6fb3f51d, 0xa35b9ea3, 0xfe7a8c52,
-	0x962ce2a1, 0xff71afa4, 0x39f5ff39, 0x3d04a669, 0xf1c83ea9, 0xa4e73aa4,
-	0xcff7a42d, 0xebe91d7e, 0xaacbee84, 0xf1ef7848, 0x83b8fec2, 0x37eabd61,
-	0xc70d21fd, 0xa66f5869, 0xe975c979, 0x7ca079c3, 0x208d4f6b, 0xc5e5f7fd,
-	0x4eb95fa9, 0xeb8df4fd, 0xde09e920, 0x9742affb, 0xf24c2718, 0xb05154e8,
-	0x9d0437ca, 0xc6007a2c, 0x38b6fec5, 0xf3d2fee9, 0xa3e2571d, 0x5f05bd7f,
-	0x71d71d53, 0xd1f91147, 0x74686f4d, 0xfb44e0c8, 0xc7c80555, 0xd02fa0f5,
-	0xc4af516f, 0x647ba1df, 0x1ee9590f, 0xb74dfae6, 0xd5e38cdc, 0xb09ab71f,
-	0xabe1d4fd, 0x495c1226, 0x2a780aeb, 0xfbde8a18, 0xbe05e28a, 0x3d81fc04,
-	0xe72dfc41, 0xc1370093, 0xba29fb01, 0x08afa88f, 0x0e4133d6, 0xedc859bc,
-	0x65df782e, 0xf7e6fa21, 0xd7cff561, 0x575f3495, 0x64df7cd2, 0x17ccdf44,
-	0x782cf9a4, 0xe7c26adb, 0xb6bfee0b, 0xa73df704, 0x79a74dd6, 0x4ff0ca9d,
-	0x553afe44, 0x210ffd00, 0x0fdc172f, 0x0bfb2cf3, 0xd3b76cf3, 0xcf3b0d7a,
-	0xf60ef88c, 0x89f9e617, 0xcf3943a0, 0x0d3d34f7, 0xcf43f9f3, 0x2efd0caa,
-	0xc6c0fca1, 0xbf4ebca9, 0x73321713, 0x4a6d087a, 0xdedf7ca5, 0x04fbfe6e,
-	0x78c00e52, 0x260f49e7, 0xd55387a2, 0xd0c9e6fa, 0x3f07ffdf, 0x00b71737,
-	0x0000b717, 0x00088b1f, 0x00000000, 0x7dcdff00, 0xd554780b, 0x733effb5,
-	0x64932666, 0x08124c92, 0x3c984081, 0x49849009, 0x768a8802, 0x02d10478,
-	0x89794f0d, 0x42100793, 0x69b5a05e, 0x0240cd6b, 0x350d45a2, 0x01d45a2a,
-	0x0da2a281, 0xbc150a0a, 0x45622a03, 0xb68b57c5, 0x514026e5, 0x5ea0c679,
-	0xffd7b5ae, 0x4e7dadfa, 0x5490ce72, 0x7dfbdedb, 0xdf1f7cff, 0x5afd9f66,
-	0xd7b5ed7b, 0xe7bdaf5e, 0xcbaa3dc2, 0xe4e216ef, 0xff6f05dd, 0xf7a517bc,
-	0xfc812eaa, 0x02cddf58, 0x2cc38ff9, 0x934a14fe, 0xfe70a68b, 0xa56b9b65,
-	0xa689c422, 0xa141fdbf, 0x367d85fc, 0x0bf2a0b7, 0xcef74529, 0xea8f7e46,
-	0x2fed415a, 0x259f680c, 0xd8b97386, 0x5deae544, 0x2e509a23, 0xcae61e1e,
-	0x0df2f2a0, 0x09644261, 0x6856fbfe, 0x3be9237f, 0x6ba50b52, 0x34786f55,
-	0xfd2f4da5, 0x6fa5c944, 0x578f3756, 0xf724abf3, 0xb97e34dd, 0xf9ed5855,
-	0x399edca8, 0xf388472d, 0x03136d7b, 0x233f32d9, 0xb03fcb87, 0x5d8d7952,
-	0x7bf85af8, 0x0e6a7dad, 0xd2b6e28f, 0x0fa98b38, 0xfae94a91, 0xea60ef18,
-	0x938d317f, 0x8b7de342, 0x0e5c1fbf, 0xe7cb0edf, 0x9fa88a0b, 0xf6626d7b,
-	0xf55dd973, 0x4ddb34f4, 0x6d46f61d, 0x553b577b, 0x3cc62588, 0x2422a1e1,
-	0x477914bf, 0xa432be57, 0x7ca42abc, 0xa7cfbf47, 0x1f2f3914, 0x1fc6037f,
-	0x12c785d1, 0x2c3b8f0d, 0x72eb1df4, 0x44d8128f, 0xbab12dff, 0xfe09cbed,
-	0x9b88c6e7, 0x55a94fd1, 0x47cdae38, 0x5f9e0ebd, 0x86345589, 0x87bbe3e5,
-	0xa6f3e9eb, 0xe2c31afe, 0xced11f28, 0x89bd53e3, 0xda9e4376, 0xab9ae09b,
-	0x4ba7a3c1, 0x4ebb85b7, 0x7fa0f3ea, 0xa6b12d55, 0xbeeecd7c, 0x7c0693ae,
-	0xfa7fc52f, 0x3449bfd2, 0x8bc091fb, 0xdddaabfc, 0xe892307a, 0xcdf14da7,
-	0x17bf5375, 0x9d1d7e0e, 0x1f75e6ed, 0x9beb4459, 0x7f3ea6af, 0xbedbe698,
-	0x426cf547, 0xfdd86fbf, 0xe7fd0c4a, 0x6e0f8b9b, 0x2fd5efa7, 0xddbb89a7,
-	0xc50ff35d, 0x17dd85e3, 0xfbe953a3, 0x08f643f9, 0xb9e68c31, 0x9dac7e37,
-	0x5c4762e8, 0xaf78b77b, 0xef5dd6d5, 0x35b5bcef, 0xdea1aa7a, 0x3d1ad179,
-	0x252f40cd, 0x8bd62fbb, 0x5f9fc65c, 0xefc2efcd, 0xc7bd7d89, 0xf4bdf4aa,
-	0x5ac6fdf7, 0xc35fbd28, 0xf736bddb, 0x6e096b13, 0xcf309eff, 0xfcfb8216,
-	0x682db31b, 0x728dfe7f, 0xcbcdbd2d, 0x244f5fe9, 0x8b68fc63, 0xbc7d77a4,
-	0xf70b6e35, 0x7b696a53, 0x8fda1aec, 0x93ebbfa5, 0x55d290d2, 0xcfc96a5e,
-	0xb76f3ac4, 0xdc002fb5, 0x46b115e7, 0xe7eaeb89, 0xdb9bb77e, 0xc9f3df9f,
-	0x270fe063, 0x4f901dee, 0x41f94d64, 0x3f2a3eb9, 0xa64151ff, 0x7f3dfa8b,
-	0xf80f5f4f, 0xfb9b76c2, 0xbbb7a636, 0xf7d83ca2, 0xa7187f7a, 0xb9effd16,
-	0xe90fa462, 0xca5e1247, 0xb8e4fae7, 0xabbf257e, 0xfb8b68df, 0x17e0d1be,
-	0xb679b7bf, 0xeffcb250, 0x31627d69, 0x6ee7ec3f, 0x4d74a1d6, 0xf89b7098,
-	0xbb864ac9, 0x22ec7844, 0x030b964d, 0x228995bd, 0xc9b0befe, 0xf1117dfc,
-	0xbc5f7c09, 0x5cbdfcde, 0xa56ead34, 0x98092df9, 0x3fda0bbf, 0x6bec04fe,
-	0x5ec5affd, 0xff7a0514, 0x4f54cc36, 0x40fe35f8, 0x255f091f, 0xc7c11fb4,
-	0x8102519e, 0xbbdf5895, 0xe8679e54, 0xa775debc, 0x2287bb70, 0xab4167ff,
-	0x5b8f5d61, 0xf0913584, 0x1c2edc7a, 0x47e8f989, 0xf5fa8508, 0x6c0b0bef,
-	0x0f7726a1, 0x04b92afe, 0xc231af7c, 0x5bbe0822, 0x427ce05d, 0x49f7d8ac,
-	0x5d29fa32, 0x356de853, 0xe6c177c0, 0xd4e7e87d, 0xe25dfdbe, 0xf8ef54d7,
-	0x58d340d8, 0xddf8eb82, 0x1ba1a7aa, 0xb1af4eb8, 0xe1014088, 0x02212ee3,
-	0xf27f94f1, 0x5a62e493, 0x7cb6cf97, 0xa4625c92, 0x36cc457f, 0x129ea3d2,
-	0xef3ebc24, 0xfcd2ef61, 0x305cd38e, 0x5d7ad09f, 0x57866beb, 0x2ab867c7,
-	0x87a3bb6a, 0x54f740cf, 0x5577f59e, 0xf7efb178, 0xcfa002d9, 0x3c5f8dc8,
-	0xb9f40f38, 0xa14ae6d7, 0xa9f66bb1, 0x2de6955e, 0x0c81a8f6, 0x4f7b639c,
-	0x9ce05744, 0x52e053d9, 0xd9aef30d, 0x7ce116a3, 0x62fbbf39, 0xf7366942,
-	0x44edc533, 0xa03c07fb, 0xf8e09edf, 0xf7fd5b9b, 0xccd79ff8, 0x7f65ceff,
-	0xf8037090, 0x9953c6c0, 0x07c4efe0, 0x79a6e6ff, 0xc6fccf9e, 0xad10bc8e,
-	0x047f4123, 0xe09bb45f, 0x2af810bc, 0x8e5c105a, 0xd037aabd, 0xa5443acd,
-	0xff4f19d8, 0x09137c32, 0xf82e84be, 0x94a89e08, 0x56705d11, 0x38eddbbb,
-	0xa2382f67, 0x694fc173, 0x12f29342, 0x0dc9f3b4, 0x493a5afe, 0xbf1d7f10,
-	0x70cae167, 0x8a4d0bc8, 0x97be8c27, 0xdcf955ed, 0x191bdb2a, 0x3f1816c0,
-	0xd2f9c9c8, 0x1840d547, 0xa3a827e5, 0xea9b30ff, 0xf547be2f, 0xfb148ed0,
-	0x07f6de37, 0x8375d61b, 0x881ca04d, 0x344b5c03, 0xfdec96b8, 0x8d0a67e1,
-	0x2ddf78b3, 0xe2ce3007, 0x170f1407, 0xe8edf3a8, 0x8a43c977, 0x67405788,
-	0x3a46e3b6, 0xce64d85b, 0x0bad122f, 0xc1fc1554, 0x9ef09dfc, 0x96fd415c,
-	0xdd730eef, 0xa102f18d, 0x4abc42e5, 0xff68d4f0, 0x3b58cacf, 0xcfd500f7,
-	0x3c6768da, 0xe2170f9c, 0xb5abf608, 0x0d204135, 0x1d6326b6, 0x6bf9efcf,
-	0xe6b1d632, 0x2995ff77, 0xcebf59ba, 0xaa37b4fd, 0x2148a9d7, 0xc4514eae,
-	0xfba0a9b7, 0xba8a538b, 0x201b6fa9, 0x9b36c5f7, 0xca879fbf, 0x8afc6c0f,
-	0x3d85c1f9, 0x6eae81be, 0xbf6bb7e8, 0x892dc3fa, 0x02e18348, 0xd716f0e9,
-	0x2427d80d, 0x35be620f, 0xdb4f569b, 0x97f0f944, 0x44b9386c, 0xf793864d,
-	0x42c7f60b, 0x3efabf43, 0x80be06d9, 0x0fe48474, 0x1cf201b6, 0x7b9daa3d,
-	0x4c77f6db, 0x9e06e8c9, 0xd71b6ea3, 0x5c100db3, 0xd17759ef, 0x845bd05c,
-	0xbe0d1fc5, 0x775ebc2d, 0xa2b3c22f, 0x5d4357d1, 0x89ef82ad, 0xfed389a2,
-	0x47d385a2, 0x5139f085, 0xc05c785f, 0x620310b3, 0xf3de3f81, 0xccbecf8c,
-	0xadac7f37, 0xe8357821, 0x022b1fc4, 0xeaffe85b, 0x63508746, 0x46b5ed20,
-	0xce5451a3, 0x5206fbb4, 0xd503edb9, 0x1dde40a2, 0xc7a7afa0, 0xa5f7fd85,
-	0x718c4673, 0x2e1ff6fd, 0xaafe8899, 0x8c22a976, 0xd3b73bfa, 0xd44e8226,
-	0x7c02fda7, 0x9ec2fe1c, 0x57b4be02, 0x6b979011, 0x35ef8f28, 0x80deada3,
-	0xa4772f01, 0xd50f18d8, 0x9cf29929, 0x4d0f7ab6, 0xbbcf7ea2, 0xeb90ec4a,
-	0x26cb876d, 0x25b1bce2, 0xd701d896, 0x1d63c3fe, 0x58b75829, 0xd59bef2b,
-	0x8f71f57b, 0x547fd0b8, 0x6f0c07ec, 0x4445b663, 0xa3c6bb53, 0xa6460161,
-	0x30a1f243, 0xc18daf0d, 0x37770ef1, 0xe317e3eb, 0x2a28c493, 0x044ea9df,
-	0x255ce79c, 0x2da3ac2e, 0x0aeee896, 0x4ef36f6a, 0x0dfa9abc, 0x078b8d8b,
-	0xd2526b7c, 0x8abf3d78, 0xbf3865ad, 0xcfc2f122, 0x08b6b7fb, 0x65fec6f9,
-	0xe9bee32a, 0x35cfde21, 0xd47e390e, 0x51cf953e, 0xe343a571, 0x4abbefdb,
-	0xc9059c69, 0x0f4147be, 0xc46dfc9d, 0x39fc02ab, 0xf96162cb, 0xe735f1ac,
-	0xbd21f05a, 0xa48a6cfc, 0x563d7d37, 0xc0bab2f5, 0xe8d51e3f, 0xc8ab9573,
-	0xa7986f91, 0xc345b7ad, 0x78039157, 0x3a2f61da, 0x9da5f384, 0x3cdce3be,
-	0x01cd3890, 0x59ea853d, 0x7aa9cfd0, 0xf47631da, 0xfc01c33b, 0x3255ea2e,
-	0x8b16ed01, 0x6fd8d5da, 0x22abd78b, 0x8dabe068, 0xa2ee3936, 0x1822114b,
-	0x22ee35df, 0x7f6e3f5a, 0xe9045a29, 0x970c6ddc, 0xe4a31af5, 0x452379fe,
-	0xb50f9fee, 0xf969b4f9, 0x7baf997f, 0x5cfd7ccc, 0x96b61fec, 0x46fefe48,
-	0xa55bf50a, 0xa1484eb4, 0xec4eadf9, 0xa7bf03b0, 0x98225dea, 0xb2f78069,
-	0xa08bc679, 0x7acedc61, 0x9f3c1c97, 0x3370f5ae, 0x75f35dfc, 0xd54e1e32,
-	0x7b1e3227, 0x84c93fee, 0x53feaec7, 0xbcbc784d, 0xff1e4cff, 0x77d67d54,
-	0x87b43ff4, 0xf826ddfe, 0xe74dfabb, 0xdf6ec571, 0x3b97f040, 0x980fc45d,
-	0x505f886e, 0x3df15db9, 0xdbe4357e, 0xe404c28f, 0x7dc2afbe, 0xfe065c83,
-	0x65ce0df0, 0x4982e7d6, 0xd17eb7e0, 0xeecd69cc, 0xded0138b, 0xfb017c4d,
-	0x11af2f49, 0xf8270ced, 0x3583e885, 0x7cb9bab4, 0xf4106fb7, 0x4e8e1d22,
-	0xa775e679, 0x20fb42df, 0xa3dfdf6c, 0x582f8fb1, 0x2878a7db, 0x46abd96d,
-	0x7c75f71a, 0xb1a7a4aa, 0x6dc8be03, 0x68d5efa5, 0xb6ef7c47, 0x020e9797,
-	0xdac3aa7e, 0x81f70173, 0x8b96ff97, 0x7dabe473, 0xfbe2074b, 0xf2cfaa36,
-	0xdabdbd87, 0x5d2fe863, 0x5196fcb8, 0x5533a95d, 0xefd0ffee, 0xf435f6db,
-	0x89db1c03, 0x0b9209bd, 0x0a2aebab, 0x0d83c64e, 0xff07ef79, 0x58b7c412,
-	0x5d3dda1f, 0xeef9031d, 0x28799243, 0x948f7c3f, 0x100f861b, 0xe40a4b01,
-	0x83670fbe, 0xb08f544f, 0x470aa0bb, 0x79611de4, 0xc384623b, 0xbffd50a5,
-	0xdbe397f7, 0xa1a42f21, 0xe83c617d, 0xf164caf9, 0x1b6dc9ef, 0xf04ff642,
-	0x34edeabd, 0x3ada955e, 0xfbc29c65, 0x7c153f28, 0xde2fadfb, 0x04d7f4d6,
-	0x9c01cfac, 0xfbcf046b, 0xa9653f5a, 0xcf502bbe, 0xe7bd68e7, 0x7337aa0a,
-	0xe864df56, 0x7e9ac547, 0x52112626, 0x947e64ae, 0xe5c83b03, 0x83d4b6e7,
-	0x3e7c525e, 0xd7dfc1e0, 0x35f9c1e1, 0xfa384934, 0x62455e12, 0x8d1a7520,
-	0xa2d5213b, 0xc0140fdb, 0xe39b443d, 0x965afd33, 0x1939f2c7, 0xfd1d0388,
-	0x4b4ee3b3, 0xfc064ef5, 0x670ffd7a, 0x75f1cbcd, 0xf2e86e73, 0xb2deddbc,
-	0x57b6700c, 0xfc7f5939, 0xeed44500, 0x41615989, 0x8a7a1a35, 0xf9f40d73,
-	0x0e0b91a3, 0x8c7c26f6, 0x43cdf28f, 0xbc6fb3ff, 0xcaf2357e, 0x72f77881,
-	0xeb7173d0, 0xc2efd648, 0xbca3377d, 0x981be1d2, 0x373c5340, 0x062837c0,
-	0xbc517c87, 0x9451275c, 0xfc2dd453, 0x45629e12, 0xe518df8e, 0xc53f472b,
-	0x5d8f2396, 0x23d66f81, 0x8d106f6c, 0x739fb9bd, 0x9dde5176, 0xe1e3affc,
-	0xfd8f3698, 0x25ed7136, 0x75fedf9a, 0x82069e31, 0x1bceecb7, 0xba50d417,
-	0x109452d0, 0xdf704d54, 0x575d4a96, 0xf6078bfa, 0x9cee7925, 0x4ebb834d,
-	0xcaeadb83, 0x50e7ee34, 0x79741bb8, 0xeb0a17e5, 0xf947fc83, 0x81b1fd17,
-	0x661f29bb, 0x74c1f8b9, 0x16395b9c, 0x886c93b6, 0x7a45bda0, 0x9c1a3be4,
-	0x73bed28f, 0x35f7f1c4, 0x21189ef8, 0x683e27db, 0x507ec009, 0xaf0f7634,
-	0x4ed513d3, 0x15634a8f, 0x721db70b, 0xb2f0a950, 0x31d7fcfe, 0x4ad7db7f,
-	0xf54e6af3, 0xddbc07dd, 0xfe496f1c, 0x0df0e180, 0x6b790a9d, 0x3fc79cb4,
-	0x1e793790, 0xc6cb84d3, 0x6b589942, 0xcd31fc81, 0x50b2a725, 0xba63fb91,
-	0xde30daf0, 0x7ae3e14c, 0x7bb79def, 0x07bc4fa1, 0xbee0885d, 0xfbf9f851,
-	0x74e0111c, 0xfd72089e, 0xe72b449b, 0x7d137c75, 0xd24bdcdc, 0x547d27c7,
-	0xc056ffc6, 0xee646efd, 0xc79a3a80, 0x650687d4, 0xdcd57eb0, 0x5df3f19b,
-	0xe8d54f70, 0x6feff686, 0xbfd88eb1, 0x699fa833, 0xdfec8437, 0xf5f5bdf1,
-	0xfb47f8cc, 0xa74748e8, 0x4bece4fe, 0x5b4eb878, 0x4bbcebd2, 0xc2127f59,
-	0x8fd1f2c5, 0xa85b7db4, 0x5a2f453a, 0xd26e239f, 0x89960897, 0x62259663,
-	0x10afafbe, 0x3ad0156f, 0x15463ebe, 0xcbd35c0d, 0xfd68a6ed, 0xe13fe94d,
-	0x0f5bd833, 0xe1af608b, 0x92f0aed4, 0x8218d5ef, 0xbdba8a7b, 0x27ca9631,
-	0xc6bd27f6, 0xefaeefc0, 0xfd0ac3b5, 0xf37486ee, 0x66d949f7, 0x68b267fd,
-	0x94fe3152, 0xfb7ae6e1, 0xb3a22781, 0xfea553f7, 0x21888622, 0x0b7af2df,
-	0x1d3e718b, 0x2fda2e93, 0x69111c10, 0x2eb18fbe, 0x75ff27cb, 0x5615c601,
-	0xb7ea9f39, 0x1debb655, 0x288b7927, 0xa7ac9c50, 0xca532293, 0x4a7fc825,
-	0xd3d203f2, 0xcf4e6ef5, 0xf28f79d2, 0xce1ef5f3, 0x9d15a417, 0x6b25bf40,
-	0x7d62b73e, 0xf8970cee, 0x9a696f2e, 0x762ab000, 0x5a441cb7, 0x809a2c16,
-	0xa1d17663, 0xef4883da, 0x6adbd4ec, 0xe1d3be59, 0xd3a345be, 0xfda6a25b,
-	0xe1d68730, 0x87aa3d96, 0x4da603f3, 0x790bdc9f, 0xa27be71b, 0x444baaa3,
-	0x54572433, 0x012fdeab, 0xdb6f7797, 0xdf9a78c1, 0x18a3f527, 0xbdeacfee,
-	0xfa99f70c, 0x4a4e9c89, 0xe81bfa2b, 0x673e2bcc, 0xf6f26c79, 0xd5126b36,
-	0x5e2af42f, 0xbd6bdbec, 0xfda01022, 0xcf26deb7, 0x0e74f581, 0xc98f1f60,
-	0xade8f699, 0x67da7c02, 0x6671a34b, 0x10a4b0de, 0x55194ce3, 0x1bbd456c,
-	0x201921bf, 0xbf4e8ba5, 0xf9f5ee8b, 0x76eb6957, 0xf18565ee, 0x2d33b1d8,
-	0xf2c17206, 0x907d695d, 0xf5d4bf12, 0xade048dd, 0xe18592e3, 0xc11a38ec,
-	0x6ede86fa, 0xe648aef9, 0xd807cb3b, 0xb760c203, 0x2ceb433c, 0x99e6f20c,
-	0x36e27e67, 0xe2672b9e, 0x18fabe5a, 0x922fedfc, 0x736491bf, 0xbff011ea,
-	0xa03cfdfe, 0x9c9af393, 0x24467a4d, 0xcd6abfce, 0x84fe08ae, 0x690899fc,
-	0x6cf91dcf, 0x2fec58d2, 0x4e1c478c, 0xf32bfce8, 0x7f5287d9, 0x6f1aeeee,
-	0x8fc2cb5b, 0xb9fca11f, 0xa36fc580, 0x689ce9f3, 0xf03bff39, 0xb64ecddf,
-	0x10a9ddeb, 0xb77f383c, 0x967ce3f4, 0xc3a88d62, 0xbc022bf9, 0xb714b3bf,
-	0x55f88eb5, 0xf70f73e5, 0x44bdfd03, 0xe5451838, 0x648bad2f, 0xcd92f67e,
-	0xfd0eac73, 0xfbfb2a3d, 0x3d3fbdcd, 0x3de91bbe, 0xc53ff955, 0x31c5a4f2,
-	0xb57ecbfe, 0xd3da0864, 0x52fa2ef9, 0xa8bf4f7f, 0x3f69c304, 0x5fef34e7,
-	0x1be097d9, 0xd2cda1b6, 0xcdbcd28f, 0xa1d2034a, 0x04386e03, 0x690df3bb,
-	0xb05f6e6e, 0xc24d453d, 0xf817ec36, 0xee7c07f8, 0xec81e59b, 0xf6c7cfe6,
-	0xc1725d13, 0xf4e5a510, 0x2c358246, 0x8fbe68f9, 0xf3c4d7f1, 0xfa77b5d9,
-	0xe604f3fb, 0xe0071241, 0xf87bb62e, 0x37f80a1c, 0xf9cf3d62, 0xd7ac3cb2,
-	0x061ff915, 0x25f39d9d, 0xbd2e7078, 0x55fc7a40, 0xcacc7fa8, 0xf3717cf3,
-	0xebb0d1bb, 0x1c7e90c4, 0x5e487f0e, 0xafd404fb, 0x7e16e01a, 0xb1e03f6a,
-	0x3f0226eb, 0x6d773bd5, 0x1d2a7ee4, 0xe5b9e81e, 0x4c1e2ebb, 0xbd789c82,
-	0x0e8064f0, 0x2ffcca77, 0x2a3d7bc7, 0xe37cb54d, 0xa47f3297, 0xa445f388,
-	0xbf515a75, 0x0f47ca54, 0x689fe769, 0xc8fe65cd, 0x5aeeeda4, 0x31525faf,
-	0xf8a7d7ca, 0xadaec2fb, 0xde749b9f, 0xab61a555, 0x23fb65d8, 0x3325e763,
-	0x79e7be5e, 0x2dced767, 0xec87bfbd, 0xfd4e1fc2, 0x3b036cc0, 0x3cbb06fa,
-	0x7f10b7a7, 0xe7e8bd01, 0x0bfb8d34, 0xef6a5fec, 0x524d3f05, 0x849d9c95,
-	0xc287a48f, 0xbef8ce58, 0x598ecfe3, 0x2eb6e7cd, 0x4844d567, 0x0567c83e,
-	0xe5185fb5, 0x5bf30bbb, 0xc2f39da8, 0x1c86ceea, 0x7bca2332, 0x3a57be37,
-	0x073193da, 0x45ef3f3a, 0xb9255abe, 0x7720cd2b, 0xd7bee339, 0xe51759f9,
-	0xbe7cc66d, 0x91b1fd6f, 0x520c6704, 0xad22cf5d, 0x9c7e5ba3, 0xfc05bdba,
-	0xc93081f8, 0x980aa38f, 0x0bf3e91f, 0xda15ffed, 0x33e23ef7, 0xe279d1af,
-	0x738fdc23, 0x7af2b18e, 0x3ca96abe, 0xa170e748, 0x6c84011c, 0x79ce1d8d,
-	0x6fe1146f, 0xbe1553bc, 0x3d45f46e, 0x1e7af5a5, 0x2bd099f8, 0xb0af54d2,
-	0xfb1dac57, 0x5bcefbf7, 0x8d47d6d5, 0xbba9f9d0, 0x37767097, 0x5bcf396f,
-	0x01f447c2, 0xdf2ac65e, 0x5b0ebe6f, 0xc3ac41d1, 0x9f1e6738, 0x539ce38b,
-	0xc304f98f, 0x43df187f, 0x1f3a19e7, 0xf27ef8e1, 0xe1158fd2, 0x7dff60b7,
-	0xdafb676e, 0xd3eb5b5e, 0xee7c25bf, 0x81ed925d, 0xf005e89d, 0x68cff05e,
-	0x7bb3cb3b, 0x7c1f84a3, 0x84d4ef65, 0x2f45ec00, 0xdf044f41, 0x79642de8,
-	0x77bfacb8, 0x7f53950e, 0x5f68c2fd, 0x2f345ec0, 0x069feb42, 0x7d15fb46,
-	0x52837db8, 0xda0e66fb, 0xbe6488af, 0xf9203473, 0x706c7378, 0x9bdf4a9e,
-	0xa814cf3f, 0xd6045477, 0xeddea2a4, 0xe5435fd2, 0x6fd43549, 0x122192f3,
-	0xf951ffce, 0xf3ce68dc, 0x32738df6, 0x4cfb671f, 0x5f6f54f3, 0x697aaff8,
-	0x51bcd5eb, 0x3d83f796, 0x9429e514, 0x9b63f4a7, 0xab573fac, 0x974691f7,
-	0x0f99cfb4, 0x5a44a6f8, 0xd2fde741, 0x99d2c24b, 0xc2fb7929, 0x5948f3ef,
-	0xe728db06, 0xc29f5c56, 0xcbd9a3f4, 0x5b7c6b66, 0x1c0d0fef, 0xcb2f2123,
-	0xb70b39bf, 0x679e8384, 0x41b78796, 0xbe5a3bee, 0xfb7a0a32, 0x0c1a9f4c,
-	0xa3395c83, 0xaf29dbd0, 0xaf5c62a5, 0xd74cb71c, 0xc0a582ff, 0x0eedcbeb,
-	0xf7cb3771, 0x3ea302c1, 0x556fafa5, 0xa37898cb, 0x27615cde, 0x2cf042fe,
-	0x9a6df6d1, 0x7d3bd7d3, 0xebe9f404, 0xf4fa8de3, 0xe40f65a7, 0xc6d2fef2,
-	0x8def5b3b, 0xb90e993f, 0xfaa7226d, 0x0f7a9d78, 0x57e74dd6, 0x25db97a0,
-	0xfb6b08bd, 0xdf298b47, 0x07887b30, 0xd389eaf6, 0x1d6f4c1c, 0x1f2ce12d,
-	0xf08ecc37, 0xb0d76ec2, 0x06ed8c2b, 0x83fb6b37, 0x1ba628f4, 0xee28beff,
-	0xf32ed2a7, 0x3065cf95, 0x0f60bcdd, 0xe515b93c, 0x7fb3872f, 0x8e5a32b6,
-	0x24bbf95b, 0x29bd2e8d, 0x5fb17aab, 0x32a5e98e, 0xe5c31dc2, 0x7a678fbf,
-	0x57dc367a, 0x7d127c00, 0xd2bc5db2, 0x258ccc1e, 0xe8d31ffc, 0xfb237a0f,
-	0x98a36af5, 0xf796856e, 0xf59e3cfd, 0x797f9238, 0x437ddf3c, 0x7bb3ef39,
-	0x3ec42efb, 0xf0c91e5a, 0xf2c9731c, 0xbcb19563, 0xb7dfe60f, 0xc5fc30f4,
-	0xbcec8ac7, 0x55ed8e5f, 0x73fade59, 0x9f841a9d, 0x9acfa75b, 0x86dfc725,
-	0xe1baa8f9, 0xd4dde4a3, 0x5595fccf, 0x7e6ed093, 0x7053edc5, 0xf69af6de,
-	0x4369fb29, 0x4afcf3f7, 0x97d47fb3, 0xf98c9dee, 0x760764d5, 0x1e7ea41c,
-	0x116a739c, 0xee9fd3d6, 0x3ef5869b, 0xe17d6f6f, 0xeb77044f, 0x5eb23f8a,
-	0x6fb47d74, 0xd85fbe26, 0x5fae1bf3, 0x16bff2bd, 0xb6afce41, 0xcfd17a4a,
-	0x7e8d1ae3, 0x1e6f8645, 0x7cae57ea, 0xc881f59d, 0x7f9223ec, 0xf8fdfede,
-	0x5bbde9ce, 0xdda8505e, 0xd5bd88d2, 0x5c81aa9c, 0x94676b9c, 0x0692b460,
-	0xed3d4a7c, 0x8d182bac, 0xa459f175, 0x5b74b89c, 0x4b181f88, 0x7fd9a091,
-	0x16d2dda8, 0xf242bf19, 0x19f41d82, 0x7d297f5a, 0xf3df7ae7, 0x9168857b,
-	0xdf7763df, 0xf75cb57b, 0xfc387060, 0xb09b19ae, 0xfd76e7ee, 0x77e8d326,
-	0x872f4d0d, 0xacffce57, 0xeace5fb6, 0xbdb665fb, 0xb9005ed3, 0x7d33fceb,
-	0xfe76744c, 0x3f9cc1c9, 0x112bb4ad, 0x577f974a, 0x72465a78, 0x65b78d7c,
-	0x07e7e424, 0xe34befb5, 0xaf82465b, 0x384e7ce9, 0xff59725a, 0x85c96acf,
-	0x47f3abbe, 0xc992d451, 0x992d03df, 0x4582ff68, 0x8ff853da, 0x3a78a8e0,
-	0xd2dde369, 0x0cb7e10f, 0x26e87e47, 0x1a71f5e4, 0xe91f25c2, 0xa58fbe69,
-	0xf9e63b4b, 0xbd9bf639, 0x7ad07f54, 0x707ca9bb, 0x9adf9cc0, 0x03e7ed2e,
-	0xfa6fe243, 0xc3fbeda9, 0x213c8e70, 0x3fd7f5ba, 0xd4f38da3, 0x3c719d53,
-	0x0acfa6aa, 0x6e1f4eb7, 0x80dbdf29, 0xf13a8fef, 0xf1126b7d, 0x6398a5e5,
-	0x9e5fcf2a, 0xfb494f67, 0xbe790bcd, 0xe7179c24, 0xff821781, 0x67ca5885,
-	0x7892be43, 0x3e3af3d5, 0xf2bfe743, 0xb04945a3, 0xae947edf, 0x7d3cf9db,
-	0xde3a9740, 0xefa46c1a, 0x2e3f4364, 0x8569382f, 0x2c49ecde, 0xdaec1ab3,
-	0xd81cf3eb, 0xe4378b57, 0xd6748c39, 0x10e0adb0, 0xece21c49, 0x2007ab36,
-	0xf7035837, 0xd86f7e42, 0x05f8b6a6, 0x54bc3b97, 0xc0f3acff, 0x68b7a8db,
-	0xe43e6c43, 0xe2fdbd6d, 0xcb1223f5, 0xdd0e700c, 0x9c875e66, 0xd87e7316,
-	0x04fe736e, 0xffde80ce, 0xa0bcbb7c, 0xc8705f39, 0x83e4ff9c, 0x9c81675b,
-	0xbdff55cb, 0x3f89f42a, 0xf384384d, 0x5e17d3f1, 0x2cfac68c, 0x41d94bfd,
-	0x71a149e8, 0x0a6eb422, 0x56ff08f4, 0xb2e3e985, 0xf81e9178, 0x810f1e81,
-	0x93a4619d, 0x683fe10a, 0xfebcb94d, 0xcb32d119, 0x5955744b, 0x64e0bcb7,
-	0x57bf5741, 0x43b3acb6, 0xb71d0bce, 0x9c2ffda7, 0x6aec375e, 0xd964a3c5,
-	0xc5637555, 0xd62df809, 0xf4013bbe, 0x854bfc57, 0xe7e28ae5, 0xbe0abd07,
-	0xce63b6df, 0x9ace9c0d, 0xedd0f8c8, 0x2af78b7d, 0xbbca28c1, 0x5dba4946,
-	0x7d615eb8, 0x1cd1a4bd, 0x36b65747, 0xd9a6de24, 0xf778be5c, 0x9f86fffe,
-	0x18f1dcbe, 0x1e5c33c7, 0x05781827, 0xa7c55b7a, 0x153ded82, 0x330dbf9b,
-	0x2d79cb97, 0xbfe1e7d4, 0xaee1e396, 0xcf3a5592, 0xd0c893b7, 0x574bf0f9,
-	0xe1066a51, 0x8de6aafd, 0xbd9b94aa, 0x7597ecc5, 0xb0ce39da, 0x918221ca,
-	0x28a1cf04, 0xdf45d7bb, 0x628fae2f, 0x18516179, 0x9cf99fc9, 0x438e708a,
-	0xdda0c4f4, 0x965477a9, 0x25e2aa83, 0x571eaa1e, 0x56c5b002, 0xfc8a48c1,
-	0x04bf3213, 0xd25526de, 0x3f00d78f, 0x1798cdd6, 0xab6f524d, 0x03f706b4,
-	0xc0e79d2f, 0x4abd7336, 0x38d1e79a, 0xefe659c8, 0xeb9da2d5, 0x36feecd7,
-	0x60ddf8cc, 0x527d65df, 0xc8556bd7, 0x7aa70433, 0xb3cb0447, 0x402398c4,
-	0xef14ab57, 0x29150ec3, 0xefa0e39d, 0x2f964e25, 0xe7946ee6, 0x838c3347,
-	0x0dd78390, 0xae67b966, 0xbe04cde2, 0xd670bac4, 0x1fdca9a7, 0x64e58bde,
-	0x4e484396, 0x7daa3966, 0x12e39d8e, 0x825af39b, 0x1f9ac790, 0x0ad0f148,
-	0xf3e47f32, 0x96709ee8, 0x4aa79a7b, 0x5d79a7b9, 0x31ff6e1f, 0x390beb40,
-	0xf9b9e25a, 0xb71e1c9e, 0x89db2a9f, 0x200f523e, 0x7a133ab9, 0x41e5c102,
-	0x67472eb9, 0xb04afac5, 0x9bfcfaee, 0xe0a3db63, 0xf1e512c7, 0xd86e4bdf,
-	0xed879da2, 0xf003c2eb, 0x8a549c53, 0xf60c5a0e, 0xe4325ba9, 0xac7231f9,
-	0x8f56ab77, 0x966519fd, 0x80ff77a9, 0xd07b29e0, 0xe9486ee2, 0xf5e1075a,
-	0x27fe6266, 0x83e785d7, 0x958e46ee, 0x7963a7f6, 0x0e479f92, 0x73bf1c17,
-	0xedefd6bb, 0x9a531619, 0x48f44118, 0x942c9cfd, 0xe1a8edf6, 0xa4076c45,
-	0xbbb9ba35, 0x19359038, 0xb32a9cf2, 0x9afefd17, 0xa4e9e06e, 0xde52f18b,
-	0xd94cb93d, 0x72f2e124, 0x5fc8dfbc, 0xf0fdb385, 0xe8de76a4, 0x347441eb,
-	0x8d71cf82, 0xe8d3ad9f, 0x74cf5d66, 0xb98ba263, 0x3741b790, 0xd8b9e473,
-	0xfada5749, 0x7af0dd12, 0x485d13b7, 0x6be211ba, 0x4b742fb4, 0xdf443b79,
-	0x7bb7d4ea, 0x0e88b7d0, 0x6de8c89e, 0x074217a8, 0xf1181ac2, 0x252cfc8f,
-	0x2a4762a3, 0x564904b4, 0x2cdc47e1, 0xd7c646ce, 0x4ac0d65d, 0x55bfa782,
-	0xab00cbae, 0x653a3ba4, 0x5cf911fc, 0xd9f88bdf, 0x0b17fbe2, 0x4e2fd52f,
-	0x4ab76c12, 0x2626f927, 0xa409db8e, 0xb0aa0770, 0xf68a50e7, 0xffb231c5,
-	0xc46fa262, 0x5e7f51b3, 0xdcc69c4b, 0x2a7fc246, 0xfb407e58, 0xef6e7ce8,
-	0x5ef6c8b7, 0xd303a52b, 0x5f6a3ee4, 0x2bf8c615, 0x264073be, 0x58d264e8,
-	0x66249d33, 0x4f41394a, 0xbadd331b, 0x7e0890dc, 0x9838d250, 0xf08699cf,
-	0xd85daaa2, 0x7d48cfa7, 0x4df578a3, 0xbe004793, 0xd83de367, 0xeca7a7c2,
-	0x494aff60, 0x7f1f9ce3, 0x5b653d08, 0x98df7f38, 0x780f7be9, 0x17b8ad3f,
-	0x250fa2ec, 0x27b15f33, 0xcb5f7b52, 0xa3bf73d4, 0xc77f8a74, 0xa62390db,
-	0xfeb950cc, 0xb9ed2114, 0x338e51a2, 0x35b9ffd9, 0x3c9bfa91, 0x94f0e15a,
-	0xf25770b6, 0xb455f832, 0xd1a63df5, 0x98b84377, 0x70139cfd, 0xcd4cc80d,
-	0x24821f86, 0xe4e46ed4, 0xfd5a9901, 0xc806ca31, 0xc9c70343, 0x47d7a7fd,
-	0x2d37e83f, 0xcfb7ee53, 0xe7a77db4, 0xbf5caf09, 0x5b584d6c, 0x5b52345a,
-	0xf3a51070, 0x039ec6b2, 0x2a94999f, 0xde07ac26, 0x4d8aaa7f, 0x317b6f0c,
-	0x4ca885f3, 0x8f82f837, 0xfba65914, 0xee99836d, 0xb7b4c6db, 0xb6f949dd,
-	0x7ed2392d, 0x0bf3e9a7, 0x82e5825d, 0xef9231b6, 0x64896fb5, 0xd5cc73fe,
-	0xed27151a, 0x97dfac5d, 0xd7f1246a, 0xe17b86ba, 0xda752e37, 0x2c7e70db,
-	0xfb3a607c, 0x499b4bfb, 0xfd5c47bf, 0x4f7eb35a, 0x6658787a, 0xa87afa37,
-	0x019a0e5e, 0x55ad951d, 0x36070e98, 0x997dec78, 0xcc2e29cf, 0x4c19ccaf,
-	0xf32fff07, 0xf05c7384, 0x37fb7a65, 0xb091f784, 0xba0e0b1f, 0xd7c83a1a,
-	0x3716e30b, 0x1a7eb315, 0xfe63ed99, 0xbc255035, 0xd4cf1d10, 0xec126fe8,
-	0xd64be0a0, 0x97d8bed6, 0xdf6865af, 0x4e995ce3, 0xbe70eba6, 0x7366d06f,
-	0xb6be0265, 0x9c16e155, 0x4a5693b7, 0xe77da6fa, 0xbb80bdc0, 0xfc0222ac,
-	0x7ed6b8e0, 0xd16b0afe, 0x77f7ca46, 0x1c546b08, 0xe98f2be8, 0xfbe5903b,
-	0xe9f7eb0c, 0xc828c42f, 0xd76ba50d, 0xfa34b849, 0xe323d610, 0x4f9c69e3,
-	0xc3e4a4b7, 0x53d3a0ae, 0x766c6b20, 0x5d0308e6, 0x1e9850cc, 0x60873e68,
-	0x55979d9f, 0xfa728f92, 0x32f41fbe, 0x1d306c69, 0x6a85d871, 0x76abc725,
-	0xe20f0a24, 0x3b443a87, 0x241d23cb, 0xea3f808f, 0x27e7467c, 0x475e1744,
-	0xeb7ad742, 0x3d6b657c, 0xde784681, 0xf4e0ef56, 0xb0977aa9, 0x5ed84f12,
-	0x67f9c89f, 0xb69cddeb, 0xf7f167d4, 0x9c3deae7, 0x8a3f59df, 0x7bd42ff3,
-	0x7ebbbf39, 0xabbfa722, 0x84efe22f, 0x3a4be61f, 0x93f9d1df, 0x9f3a5f4e,
-	0x05aba50a, 0x33dc6684, 0x0fccf6a0, 0x79883e75, 0xf8bbf258, 0xa9cebe93,
-	0x113f914a, 0xceb450fc, 0x5428ff01, 0x22f33ecf, 0xdca3b9e1, 0x1da1f1c9,
-	0x0ec1f242, 0x8dcf83a7, 0x0dd8bb64, 0x32c340fb, 0x869ddb6f, 0xb95e7873,
-	0xba06ac22, 0x5c36a9bd, 0x7d740d58, 0x29ac5d73, 0xfdeebf3f, 0xff50fad7,
-	0x2df18b3f, 0xbb1cfac2, 0x7fa3d4e3, 0xdf8fefa4, 0xeb033a71, 0x796c704e,
-	0x1edee308, 0x2ad1c1a1, 0xceddbae1, 0x08c0d2f2, 0xcfe14fa9, 0x2d738861,
-	0xfb7d894e, 0x31e70437, 0xda061d6d, 0xc146b35d, 0x754ab32e, 0x1f2aa4ad,
-	0xfbe8bd63, 0x2af5b59f, 0x7c630ba9, 0xfb6a3496, 0x4cff18d4, 0x57de3cf8,
-	0x78a75cb0, 0xe91f8085, 0x41ec2ff8, 0x71c41192, 0x685011c5, 0xad94851c,
-	0xae17b0f9, 0xe428fd79, 0x10eea574, 0x873ed5cb, 0x8428e393, 0xd8d676df,
-	0x9077529f, 0xfed689eb, 0xc8c838a6, 0xf83b5ee1, 0xeb1b6805, 0x40759256,
-	0x268b9f60, 0x94f1ef85, 0xd6cbdf69, 0xe2f8a628, 0xe655337b, 0xac32878b,
-	0x14ca0e9c, 0x89a5139a, 0x5e9d29cf, 0x3c707f89, 0x9e535963, 0x2f81917d,
-	0x4bdf6897, 0x78a62cb3, 0x321943c7, 0x98106a2e, 0x6777a505, 0x3217daa5,
-	0xdc7373df, 0x24bf5ebd, 0xea757f2b, 0xe883f470, 0x8ff6aea0, 0xddb95a64,
-	0x84970ca1, 0x59e741c7, 0x74e9c714, 0x72e82e7b, 0xeff8a7cc, 0xeb3f0c95,
-	0x3ecf1559, 0x7bfc2cfd, 0xe30a7f15, 0x9862a9f3, 0x0ec8df66, 0xf2ce9c8c,
-	0x8ca9d78f, 0xd72dfc84, 0x7fd3fc7f, 0x547c4689, 0x57694ecd, 0x690db4a5,
-	0x6ce5edf5, 0xd0f6ab57, 0x9f0388fe, 0x5fcdfb35, 0xd14ff67d, 0xf897acad,
-	0x5bf8b493, 0xdeaaf78e, 0xc0e38279, 0xd0afb8f4, 0x37ca3576, 0x71eaa7ac,
-	0xb63fba01, 0xf78d9f70, 0x851ecd4d, 0x5d9a98f5, 0xe7c01317, 0x4aadf66a,
-	0x272e2ee8, 0x5e3d5fb4, 0xd5bfb740, 0xc39fb588, 0xc384487f, 0xffad0ff8,
-	0xaf546676, 0x62054353, 0x3b60aed5, 0x1c705588, 0x8e2d72c7, 0xc19023b3,
-	0xe49ee17e, 0xc4f59aed, 0xedbf49f0, 0x1063bab0, 0x88417caf, 0x53addd89,
-	0x7e7920fc, 0x047da39f, 0xed85f0bf, 0x1791cb2a, 0x7ef147b6, 0xff7edea8,
-	0x55dbc441, 0x8dd8566f, 0x308e2557, 0xaa77aade, 0x0fe061c2, 0xc50bb035,
-	0xd2e70cf7, 0x416aa3a7, 0x145a4b5f, 0xadf816ef, 0xde98ee1d, 0x35da7806,
-	0xd61a5afa, 0x45d79232, 0xf814ff83, 0x5cce419a, 0x8e7ef7b2, 0xe77aa413,
-	0x6df9ae59, 0x51b3c724, 0xce036f0f, 0xd80a1b33, 0x65a4bd4f, 0x05cb3547,
-	0x105d23db, 0xccdb4e69, 0xd1be29f7, 0x9346fbc6, 0x4fc0ced3, 0xaacff682,
-	0x4e030f2c, 0x5ad3cbec, 0xcedeab3c, 0xb3b64832, 0x0dfb7868, 0xae88e7f6,
-	0xda5a4bfa, 0xfea9d3a2, 0xe7dfbb27, 0xee4839d4, 0x23ce25e3, 0x3f4738b9,
-	0xf7c919d9, 0xf9d93eed, 0xd12f09eb, 0xc65ae778, 0xfb0c52f4, 0x1b20e06c,
-	0x41b73fd7, 0x25f301c6, 0x5a0fd611, 0xb6673e78, 0x27ac2927, 0x9f84df03,
-	0x8f9f3b33, 0xf63ef0b6, 0xab717bff, 0xc86b15b3, 0xb2eb847d, 0x5bfe8047,
-	0xed11fbb5, 0x7fe5fd9a, 0xed6affa7, 0xa4529b7b, 0x3bef238d, 0xc20e3d08,
-	0xd53beda5, 0x796efbc9, 0x2fef9d94, 0xbee6182c, 0xe8f81e71, 0x518e329b,
-	0x043f77f4, 0x3bc16ffd, 0x596f6cf1, 0x41f7736e, 0x36c38bfe, 0x282c13f6,
-	0xa1f51cf0, 0xed9d8c7e, 0x75b1224a, 0x6dadec04, 0xa8be5229, 0x933b435c,
-	0xe88fdc50, 0xacf84fcd, 0x8f84580c, 0xa50793f2, 0x523ebaf2, 0xd9daf16e,
-	0xfbe413ff, 0xc2ecc792, 0xfe2f7b8f, 0x5d7ea4e7, 0x0efd2a99, 0x517f608f,
-	0xcc17195a, 0x4edd878c, 0x69ca9ba3, 0x9fa06e54, 0x4cc14dca, 0xed674fc8,
-	0x72891ed2, 0xf9954de8, 0x46835eb2, 0xfd07e8a7, 0xceb8a5b6, 0x2bbbbcb3,
-	0xb0ef404a, 0xed2518bc, 0xdf09bf21, 0xaf386614, 0xe9241a6f, 0x07f341b8,
-	0xf848b7fa, 0xf8e41700, 0x4ca6f625, 0xb8fab9c8, 0x789ba24b, 0x78dab3bc,
-	0xa49a224b, 0xc78b44ff, 0xdf1e7d43, 0xd3bfd826, 0xcb1864fe, 0x1efba7cb,
-	0x9fe30179, 0xc730727e, 0x04a5b411, 0xf2e6ed16, 0xaee38e70, 0x082c2a78,
-	0x327b3f78, 0x9f58ed8a, 0xf61ca4d9, 0xcb025459, 0x1ea28761, 0x3afe805c,
-	0xe0298736, 0xc2299fa3, 0x2df2889e, 0xa80e59bd, 0x3f63afa8, 0x17b10549,
-	0x4e94afc8, 0xd9f7dc84, 0x276cc196, 0x950decfa, 0xf7d0292f, 0x13eef835,
-	0xc67e0b4d, 0x3ff4bff2, 0x6fea7e9e, 0xaff3bb83, 0xdb366c54, 0xd7f5f4c3,
-	0x2418efcb, 0x0c7703ed, 0xcac97a92, 0x7fe92e41, 0x30796c8b, 0xf929e795,
-	0xeb03ad03, 0x131fb47f, 0xd63f6f60, 0x714127b2, 0xccc1cf02, 0xdbef035f,
-	0x7a759ea4, 0x42fd8dbb, 0x79462f15, 0xe774fed9, 0xb0ef7c15, 0x78729542,
-	0xdbde4585, 0x99eed0ab, 0xb2674456, 0xcdf08b7d, 0x16fb6d7a, 0x8e471b55,
-	0x01d6d9fb, 0xd4109fd2, 0xf0e42ff2, 0x7149b83d, 0x2c69e6e2, 0x05c86d5f,
-	0x8e6e2f5e, 0x1a79f8e4, 0x87b88bc7, 0x5cfd9f8a, 0x116633e2, 0xae7407eb,
-	0xd4ae7f31, 0x9dd573f8, 0x5ee0c757, 0xe5477881, 0xad1712fb, 0xbfe03e9e,
-	0x4f7af8a1, 0x5f4b63e3, 0x41f99478, 0xc417ed25, 0xfcd52d59, 0x529f4bcb,
-	0xba5c9e58, 0x9887eafa, 0x136dbeef, 0xb6705fb8, 0xe368fee5, 0xf8d5ec7a,
-	0x0f7b5767, 0xf54a5fd7, 0xa337fb65, 0x36ad9e19, 0x5d09e00f, 0xfeddefc7,
-	0x6a5ff529, 0xf242d15f, 0xf3e5ee45, 0xdc8e28bf, 0x95f027f6, 0x676ce1ed,
-	0x7be7f5a3, 0x2d6c6746, 0x33ff308b, 0xbf3384cf, 0xf72b1339, 0x9e7427fd,
-	0xe780edfa, 0x5db1f787, 0x02e9bded, 0x80e2d0e7, 0xae1d5fb9, 0xafdf1afd,
-	0xc0c4f78a, 0xeb45534f, 0x7d68fe81, 0xdfedc47e, 0xd0fb71b1, 0x768e3cf9,
-	0xf4fb0c23, 0x9ba64899, 0xbae4fd33, 0x1076799c, 0xb16d679f, 0xde09de92,
-	0x674be864, 0x1b8a6562, 0x0a87a03e, 0x3387a497, 0x1ed85a63, 0xc1d94670,
-	0xb64d9b69, 0xfcd3a8ab, 0x897f44da, 0x26d01fa0, 0xb58ea9ec, 0x80c72047,
-	0xe7cc8fcf, 0xcefb8834, 0xd07376a1, 0xbebfce29, 0x84dcf259, 0xcf3e0578,
-	0xe3f61b7e, 0x733df0b4, 0x564f269f, 0x4fdcbf6e, 0xdcaa7588, 0xeb3fb0ae,
-	0x02fe7692, 0xddba5eea, 0xa972e89f, 0x6e22f15f, 0xb2e3696b, 0xa5fba025,
-	0x81e6ebb5, 0x2c79f5ee, 0xb75feed5, 0xd3c32a29, 0x27fb4e16, 0x74f1f2fb,
-	0x8a59aafc, 0x5c279f1e, 0x7b45f9fa, 0x2dcb2c38, 0x4db288e9, 0xa3655fd4,
-	0x49c796b2, 0x395bf5d1, 0xb84f1d3f, 0x5efb02cd, 0xb9df769b, 0x70ebf9a7,
-	0x524f04f6, 0x6d4fe496, 0x6f9ef229, 0xbef25bfb, 0x0a6fc5f6, 0x81fee262,
-	0xfa91c83c, 0x7f047f7a, 0x72106816, 0x96e7c68f, 0x704eaec2, 0xfb306e66,
-	0x9b36b273, 0x9bb643f3, 0xcd3bd9f3, 0xe6bddcf9, 0x7355e7bc, 0x7b7185de,
-	0xfa09e177, 0xa103e236, 0xbe85236f, 0xfa94ceed, 0xb7d0f236, 0xc6df4291,
-	0xc8dbe877, 0x1e46df43, 0xd0f236fa, 0xdf4291b7, 0x1a39f7c6, 0x7b352a9e,
-	0xe381d629, 0xeb84f6d4, 0x5fbc00f1, 0x6049cc2e, 0x52ac2a3e, 0x24b0bd1f,
-	0x4ec7e59b, 0x0754d33b, 0x38f499db, 0x7ca2b7a7, 0xc37ab2e3, 0x75647b7f,
-	0xc76e14df, 0xdf9ae7f6, 0x6573fb49, 0xf613b87e, 0x9f55d68e, 0x13d886ac,
-	0x444df288, 0xf6b60bfd, 0x556fc0ad, 0x6fec2bdd, 0x7ee15d6f, 0xfd7207e7,
-	0xc7a2eed8, 0xdce3152d, 0x7d26df03, 0x7b6fc649, 0x6a3b461c, 0xac485fa8,
-	0x3f21e435, 0xa1f39b35, 0x35f0207e, 0x355f69af, 0x6e3c1d31, 0xbe0bef6b,
-	0x0749e27f, 0xa13af3df, 0x6cc4edd9, 0xba63cb17, 0x8f29df3c, 0xc26ca3dd,
-	0x2b24bdf9, 0x1c77db8e, 0xd3dd30ca, 0x2f4b4d0b, 0xdabcb3e5, 0x58ab5f99,
-	0x8cd94e30, 0xaf59fb15, 0x73e68c4e, 0xb60d16e9, 0x0dff9041, 0x440e0f70,
-	0xe868e898, 0xbf10b8b6, 0xfd533f65, 0x4353bb61, 0x4c4396fc, 0x16d7d3e5,
-	0x17b5ef98, 0x1f2a6d5d, 0x878cef68, 0x96ff4873, 0xd64b9f06, 0xe7cce8b9,
-	0x4bd686f9, 0x847f3c56, 0x25bc56bf, 0x9a32d3e5, 0x7b40b787, 0xfe1f239f,
-	0xe014ef39, 0x16c5bcaf, 0x54bef38b, 0x9d44873b, 0xb72e5cf9, 0xae2bbf0a,
-	0x5dcaee8b, 0xed4b1bc2, 0x2536b4bf, 0x71dd1d33, 0x14255934, 0x2472192d,
-	0xe57d0837, 0x8246278d, 0x8dd4aaae, 0xbf2a2ec9, 0xc56c0955, 0x71d3ec45,
-	0xa4ae123b, 0xf8b4fff2, 0x75a2c91e, 0xef05b64a, 0xba3e0f9d, 0xbde04d23,
-	0x9f6b1391, 0x3cb8e68f, 0x6d92fe8d, 0xc1d008ae, 0xf59526c6, 0xd4cdd814,
-	0xd93a2eb8, 0x011f14d8, 0x8c7ca6bd, 0x717297e2, 0x0bdf49b4, 0x9aa147c5,
-	0xe69b8efd, 0x2a90f17b, 0xf36a40ef, 0xf592ee5c, 0xaf6cba45, 0xe7d7b3df,
-	0x47d3527b, 0x96be362b, 0x3f7d0b79, 0x2e7f783b, 0xd65784ae, 0x2f79e6ef,
-	0xdadf6cb5, 0x1d7bd297, 0xd7985dbe, 0x45c6b7f2, 0x7ce3495f, 0x87c65db9,
-	0x89f9b5ff, 0x4fc4fcc7, 0xc27a6cef, 0x8541fb0e, 0x1e876035, 0x46e4fe5c,
-	0xae18e23b, 0xbf91b6db, 0xcc56da2f, 0xbefd00f6, 0x7c7aa7da, 0xf28f86b3,
-	0x1706cab1, 0x60ffb3cd, 0x23ca4fc9, 0xa14b1c64, 0xdc35fa3a, 0x4db8b813,
-	0x66bcc3c9, 0xe3b0ed14, 0x1a3bff1e, 0x37dd09df, 0x17a7871d, 0xabbd86f6,
-	0xdf20f145, 0x89993ed3, 0x0f4472cb, 0x39b92fd3, 0x0869719d, 0x0a1fd5eb,
-	0x8e70bed2, 0xd7e88764, 0xcf695587, 0xad123c43, 0xd83db973, 0x85e43a6b,
-	0x0ffbe597, 0x8d0e7455, 0x2ede87ca, 0x169455c4, 0x744d568d, 0xd23e335e,
-	0x0b660fb4, 0xfea2bec3, 0xa67e8966, 0x69498cfc, 0xce37faa6, 0x67e21a18,
-	0x672aefce, 0xe99575fe, 0xdbaa975d, 0xe3856efd, 0xbf9ac67b, 0xd33b7a53,
-	0xf6a60dd9, 0xe99a6255, 0x9b25975d, 0x133c65df, 0x8fa1d995, 0x41f76b95,
-	0xb4dafb66, 0x9dfcadef, 0xafda6226, 0x7f3cd303, 0x8da5e794, 0x1dba08fd,
-	0x9ffe367d, 0x1979ddd6, 0x898f19d1, 0x3bd85bf8, 0xe479667c, 0x42a9eb08,
-	0x669543ae, 0x92caaa8f, 0xff2aa8f6, 0x9be23b11, 0x24d6ff09, 0x93754942,
-	0xaa46f6c2, 0x938a48ef, 0x7df1dbf9, 0x075ef9a7, 0xf284bbfa, 0xf6316a43,
-	0x35796857, 0x42e71bcd, 0xb047ec35, 0x6bfde983, 0x19f4eafd, 0xb43ecf7a,
-	0x3760df1f, 0x6d8ae7ef, 0x23f60e3b, 0x8a2f4cbc, 0x497c43cd, 0x5b54cb65,
-	0x74e5f671, 0x8bfdf3a6, 0x7fb616e5, 0x857e1c75, 0xdca3ace9, 0xddf191ea,
-	0xd51f18ff, 0x0d6f695e, 0x3445bfa5, 0x1799f81f, 0x013c54ed, 0x5e03d645,
-	0x432e81fa, 0x0dd492f0, 0x753c74be, 0x7ca42de2, 0x1c33fe31, 0x004a11f1,
-	0xbc32f27c, 0xfad478e8, 0x2c13e45f, 0x013c1267, 0x3fa42786, 0xff742a31,
-	0x20efc2dd, 0x84506c74, 0x3c6ef94b, 0xed24bb4c, 0xe4d30336, 0x2977dbbc,
-	0xb3ebc81e, 0x7bf9592e, 0xc914bd27, 0x9319f538, 0x93b3fbcc, 0x7ee48a7e,
-	0x81297999, 0xd36ffddb, 0x8fd177d1, 0x8d099fee, 0x5defd6ff, 0xddac1a2d,
-	0x46211a4b, 0xc44ffb7c, 0x4072ebaf, 0xe749e74f, 0xf0d2e379, 0xf6ed4cef,
-	0x951e5e1c, 0x3edaf1ca, 0xf3a88ecd, 0x4ed69f63, 0xca98b71f, 0xefa005dd,
-	0x17b009fe, 0x4b4c6eaf, 0xe317be36, 0x3b63655b, 0x788af26f, 0x5dc38b4e,
-	0x8a473809, 0x4d77c857, 0x27d5df8e, 0xe388fe01, 0x26bd6cab, 0x7fc7d751,
-	0xe4593c3a, 0xe9c85f20, 0xb3617589, 0x3d78768d, 0xed2c1a6d, 0x7e39fa35,
-	0x7a3872ce, 0xaadff636, 0x0508d15d, 0xfdeaba5a, 0xcf3a2e91, 0x8f7c5957,
-	0xef7f660f, 0x85cf3e46, 0xec2e636b, 0x513cba70, 0x0fb0aab1, 0xffcafdce,
-	0x9c31e579, 0xb615befb, 0x9fa3c804, 0x840aa07d, 0xc679d0ce, 0xe1a7c472,
-	0xdd3fae92, 0x10f7c912, 0x1784553f, 0xea25a6fe, 0xe9975cfe, 0x0b3bdd5c,
-	0x41deffe3, 0xb8c08ee3, 0x1889ad81, 0xc4cfe3d7, 0x1915beb8, 0x57d9dd31,
-	0xbd66b4f4, 0xeab6f394, 0xeecd64f6, 0x791ef90c, 0x6270f7c8, 0x1e47be41,
-	0xc8523df2, 0x4dbef8f7, 0x6c0c2ff3, 0x7e83cf68, 0xb22b1fea, 0x75bcf96a,
-	0xbf7e4166, 0x80f08945, 0x78a2dcff, 0xc1bc70fa, 0xc4def966, 0xd57590f2,
-	0x49da6bd3, 0xedd03306, 0x84392e0f, 0x8c6e6e31, 0xc7e53588, 0xea9afa39,
-	0x4c52ba17, 0x0e25d7e5, 0xef5f9536, 0x7fe533ce, 0xa9a57598, 0x18cf64fe,
-	0xa347fe53, 0x9fd537ae, 0xca6a9dea, 0xc7389f4f, 0x51667f54, 0xc6fca9b1,
-	0xe54c4bd9, 0x4ccb7c73, 0x3fe579f9, 0xa9bfd535, 0xdca98576, 0x9c565c2b,
-	0x77a17b77, 0x865fde11, 0x2de945de, 0x8d38656f, 0x9c7a3aeb, 0x7977dba5,
-	0x5072694e, 0x36dea1bf, 0xd7ee25d0, 0x68070e80, 0xc0be67f7, 0x7e1bd2b9,
-	0xf522a0c9, 0x417d23de, 0x42f5a137, 0x1e4747cb, 0x35a6e8b8, 0x7a2a7a2c,
-	0xc4f895a6, 0x140e2be8, 0xf57e51a4, 0xad338553, 0x5f465fc4, 0x54f9e07d,
-	0xb53d37ca, 0x3b0f964a, 0x51e51170, 0xf320df4f, 0x1a8b05d3, 0x7af90c8f,
-	0x31e69f86, 0x6ba907fa, 0xd26ed23d, 0xa769bc6d, 0x80f0883d, 0x01e04d78,
-	0x13e89069, 0x4fa201e9, 0x7d12afa4, 0x710ba596, 0xe913e890, 0xf13fd221,
-	0x7fa4f7fd, 0xfa4c3d22, 0x49b7d227, 0x847a44ff, 0xefa44ff4, 0xf4e6cfd5,
-	0xb71f7a83, 0x397d43fb, 0x6beb47a7, 0xf5c7fbf9, 0xb9fe9c75, 0x5ddfcfde,
-	0x433b7443, 0xba31ed90, 0x7e1aabff, 0x76edd847, 0xfd1acedb, 0x9e578ac2,
-	0xb2bfbaa7, 0x46b456a1, 0x5ab69f62, 0xba394f63, 0xf33d90fc, 0x6538ab5b,
-	0x0f5ebf90, 0xe10d26f7, 0x98bbfbf1, 0x8fdf6b6f, 0xf203e989, 0x520a9d69,
-	0x9f28297d, 0x2aba5f99, 0x0fc7f886, 0x81b5a9be, 0x74b43e5e, 0x0bfb7f7f,
-	0x87da4e8d, 0x8c873378, 0xebbbf2e8, 0xf8ceef7e, 0x1e5f831a, 0x8e3d6cfe,
-	0xf3c7f747, 0x473e219f, 0xf1eb93f7, 0xef6ad741, 0x707ee923, 0xef47fe3d,
-	0x6092f0b7, 0x1acd77be, 0x512dcb2b, 0x38c41156, 0x35cf9c7a, 0xc43c968e,
-	0xe9535c3b, 0x3eb738e4, 0x23ef1df4, 0xde2f3d52, 0x25fcdb99, 0xf2edcfd5,
-	0xe6d1f7bb, 0x8f3ce541, 0xb63e4bc2, 0xc5a35ed7, 0x43bda01d, 0x753bf396,
-	0xfc831188, 0xe1db2941, 0x7da8551e, 0x001c577e, 0xfaca47ea, 0xfe97f441,
-	0xdd178d15, 0xc4068fb5, 0x6e21e4b5, 0x93b5406c, 0x8c36c6e3, 0xb9bdf209,
-	0xded7b1e9, 0x4e22aad3, 0xd8c7e638, 0xfaa74f47, 0xefcf0266, 0xf00f73ee,
-	0x5c5a7e50, 0x53a46f5a, 0xebb5de43, 0x62e67d66, 0xe97c755d, 0x4bd7d778,
-	0x9e21b7c7, 0x5dfcf18a, 0x6eba17eb, 0xafa5eba1, 0x2ea5e153, 0x977f03fc,
-	0xfad74faf, 0xfffb3ec1, 0xb70cfacb, 0xcc7df0b6, 0x07874ab0, 0x7ad77d70,
-	0x262edcdd, 0xf1783ee0, 0xa441f725, 0x5f7cd24b, 0x8a967f80, 0xc05c1331,
-	0x81cd4b91, 0xdeb4279d, 0xef59eff2, 0x077a90e1, 0x7cd60ae2, 0xbd79769d,
-	0x1af521dd, 0x7ed60b62, 0x374ced2d, 0xe43d7ce2, 0xed1fb1b6, 0x1e3d70cd,
-	0xa3ccebc3, 0xf1a71c75, 0x96a243a3, 0xd7120fcf, 0xf1df58fc, 0xcb8f52da,
-	0xee72cc5e, 0x6e59a778, 0x514df09c, 0xd09dc623, 0xd68e442b, 0x6837e1fc,
-	0x9a275efd, 0x7bd0dfb8, 0xf26837f2, 0xf93de869, 0xf26886e7, 0x01488a65,
-	0x3c2f1a9f, 0xbded2e12, 0xd92ef183, 0x2f46926f, 0x8c556e69, 0x9f083d06,
-	0x55f1cc15, 0x8b9077bc, 0xbf9cfd71, 0xfd38045e, 0x3f7208a1, 0x22918993,
-	0x6c2123ff, 0x79039df2, 0xf55ab33f, 0x2ce427fd, 0xc2e65efd, 0xd8abdf70,
-	0x4e44af77, 0x28f78f99, 0x4b8c15c6, 0xe303bb47, 0x1c9f2cdd, 0xbcb1a470,
-	0x8b657d84, 0x6f7fdaeb, 0x6e92f9d0, 0x9106f795, 0x3a60dee2, 0xe9d7966d,
-	0x86fe41fc, 0xed0215ac, 0x71cdb826, 0x1ffb7a38, 0x6b0ac6ba, 0xfdfccf41,
-	0xfa7bb987, 0x66f3aec3, 0xb0f1a0ec, 0x7b19bf83, 0xf7cc78c5, 0x163ed8cd,
-	0x39d98699, 0xbd3179cd, 0xa74e793b, 0x26f1aee7, 0xcf7c6b08, 0x1af1d678,
-	0xcf1d4f8a, 0x2f5e02ff, 0x2fd78774, 0x37290b06, 0xa23e4a47, 0xac2ab7e3,
-	0x1f671ef3, 0xa5445c63, 0x33e9e243, 0xb87b8c80, 0x3cf15775, 0xfd17a93e,
-	0x7545ef81, 0xd43cb8a3, 0xc736250e, 0xc77f5e70, 0xef83ccec, 0x7c122746,
-	0xea7c39d7, 0xd9cbc250, 0x492660fc, 0x0d93e230, 0xfaef7c0d, 0x07aab3dc,
-	0xeaa57ff2, 0x4f01eb5e, 0x3f655379, 0x95e6f8a0, 0xc509f864, 0xa3e3eee6,
-	0xaf121d2b, 0x32b3feba, 0xa7f788ad, 0xca241570, 0x3de4d5f7, 0xe81e5d72,
-	0x8be3261f, 0x3dccfbf5, 0x232307c9, 0x1feb1f24, 0xbeaef926, 0xf38ed49e,
-	0x48cfd449, 0xf74953e2, 0xb03eb045, 0x1a4de5db, 0x78ca7f0a, 0x75a79261,
-	0x97a3bfbd, 0x5af03f7c, 0x68d0f991, 0x643f8fca, 0xef2a0113, 0xf14c2f18,
-	0x946f8564, 0xfa16bbf2, 0x44b098fd, 0xfc0cafd2, 0x611ddc20, 0x32346f7a,
-	0x8f94ce2b, 0xd533f4f2, 0x6a95198f, 0x0ef58f2a, 0x4fc79531, 0x7be537cc,
-	0xaa655d17, 0x58f667df, 0xefafbe53, 0xa4fd5306, 0xbca669f2, 0xe49297ce,
-	0x76a03127, 0xc0fda9ae, 0xfd5312ba, 0xf9857f14, 0xf7bf54fd, 0x9e025648,
-	0x697f9477, 0xbc87966b, 0x96116aaf, 0x90ef5d91, 0xde5a3afc, 0x5ce89907,
-	0x6491efc4, 0x0cccfd34, 0x8a8dfa8f, 0x46292673, 0xae24f7e1, 0x60f99b73,
-	0x3f39a261, 0x2af795de, 0x2b9c6e96, 0xa828fe34, 0x6a929e80, 0xf3efa6ad,
-	0x347c6a86, 0x9eb2e457, 0xefeb5dfe, 0xff5a621b, 0x4e5d7c50, 0x05e7cf0f,
-	0x6f9ed2dd, 0xf9ec179c, 0x9ec0bc46, 0x9ec3cc6f, 0x7b0fac6f, 0xf61cb1be,
-	0xc179637c, 0x8c1d3321, 0x83a66238, 0xe99a8e2b, 0xd0cfa740, 0xd5b2baf5,
-	0xa7c21f4c, 0xb07f94f8, 0x6a7f575e, 0xf5d09fa6, 0xd78b0921, 0x1153826f,
-	0xfbfca48f, 0x642eb5eb, 0x87d73abd, 0xf6f90df0, 0xbe50e0da, 0x48785b27,
-	0xe4b77815, 0xd79e6d51, 0x27e5ad0d, 0x7d5bb6c3, 0xae7de6bf, 0x5f4355d1,
-	0x871d5749, 0x1f070f9e, 0xffa4347d, 0x02f9fbd7, 0xfe3b3fa8, 0xf41db262,
-	0x45df2ed1, 0xee1f036b, 0x49b715dd, 0x77bcba7a, 0xe39533f2, 0x9a598e18,
-	0x82ebf014, 0xf036df18, 0x6bb39bcb, 0x1367f815, 0x458ed145, 0x8ff9cb88,
-	0x17e464b0, 0x77f7940c, 0xdf2b7645, 0xe2f9d07f, 0x17192482, 0xf35432d8,
-	0xdc647af3, 0xa543f3ce, 0xe3ca24dd, 0xe2e338e2, 0x83bf796c, 0x05e499d4,
-	0xe1c7c039, 0x47c041f0, 0x69df85b3, 0x39b9b56c, 0x86ffc46e, 0x83f7e02a,
-	0x72f90b1c, 0x35df2680, 0x0070e47c, 0x85eb41fe, 0x1c1d9ce9, 0x5be29870,
-	0x99736e87, 0x892d39f2, 0x76c3faa6, 0x79e54dbb, 0x79532cc1, 0x298f21c1,
-	0x28c8e23f, 0x8e2bfd53, 0x2bf94d7a, 0xea9a275b, 0x9169fd5f, 0xda249f29,
-	0x077e061f, 0x3e8f522a, 0xe2553433, 0x7e382dc9, 0xb19dc16f, 0xa6a7def2,
-	0xba72eb5f, 0xd3ecf71e, 0xde5439e8, 0x71f7681f, 0x5f43751c, 0x187be1e1,
-	0x129f4d0e, 0xa7c03d66, 0xde772dc5, 0xe39bf0a3, 0xe578f596, 0xd3417d4e,
-	0xdd39740f, 0x35ecaf10, 0x082f2bc6, 0xe03dfeeb, 0x3dd6d2ff, 0x7681fe14,
-	0x9f86df39, 0x88def9da, 0x3c28570e, 0xda38b533, 0xefee8e2d, 0x25b2d8f5,
-	0x1465259d, 0xfef41dfd, 0xcad3cd98, 0x365fdd6f, 0x4fd5a79e, 0x0bf0d5f4,
-	0xfba567bb, 0x305bc7bb, 0xbe67ce4c, 0xd4f372c5, 0x32cf8e6c, 0x3bdf83bd,
-	0x51fdea5b, 0xf3b74ab9, 0xe323105b, 0xdd8c44a7, 0x79edfa0d, 0x44cf893c,
-	0xfbe468bb, 0xff9c5a47, 0xee5b6b4d, 0xf3454419, 0x7bda4ded, 0xe81b0160,
-	0x9258d261, 0xd884f2c3, 0xb35765b6, 0xc7a2e493, 0x3f6cacea, 0x35ddbfe9,
-	0xceb8248b, 0x49031bfb, 0x407d01ef, 0xb4be81b6, 0x71e54721, 0x1b9ec1ae,
-	0x4df6fd81, 0xfb3d9c67, 0xced08405, 0x754fa90b, 0x874c6f43, 0xaffe3cfa,
-	0xf143ede3, 0x42adeba4, 0xd74c338b, 0xd7f1d2e0, 0xf0d07769, 0x707fdfa7,
-	0x6d15b32f, 0x8a3df272, 0xd2db8889, 0x4725afd7, 0x86ad65d2, 0x3f03d40f,
-	0xa15ea9ea, 0xfb031d9a, 0xc7708772, 0x43a1bab8, 0xc2bffd3d, 0x9eff8e8b,
-	0xc4f557ee, 0xc2f9421f, 0xeab7dd77, 0xd9ff4e89, 0x3e06577b, 0xb468e321,
-	0x5ba40975, 0x677d3fd8, 0x6f3f7994, 0x8d7696cc, 0xa2beda71, 0x6799ddf3,
-	0xf60217e6, 0xaa5586f1, 0x39e42fc6, 0xc4529c5e, 0x3a8b11ef, 0xe533cb17,
-	0xcfd62f1a, 0xc80f85d7, 0xf5aee0f7, 0x455c2516, 0x9b6692f9, 0x15a048d8,
-	0xf38fbbfb, 0x1b93bf66, 0x449efe71, 0x3726cdc0, 0x49b4b71a, 0xb94fec09,
-	0xc5ecbdfc, 0x5c7ef94e, 0x8bd9bbe8, 0x2f17fd35, 0x86df602a, 0xcfee65fa,
-	0x8f6bced6, 0xe12b7cf0, 0x0ba5bd67, 0x02de8d7e, 0xe8311df2, 0xf3b4aac3,
-	0x8e969c70, 0x24fc3737, 0xc2795df1, 0xce16446f, 0xb76b46f3, 0xf89d7471,
-	0x9d2afdd5, 0x1cc3c27e, 0x171a1faf, 0x4affd670, 0x1a7e7774, 0xd3d37fdd,
-	0xdff4e83e, 0xa85f877c, 0x1e8969c3, 0xff043e05, 0x57e8dbbf, 0x8248f3f9,
-	0x3127fd90, 0x6ab48ff0, 0xb98d89fd, 0xf44fdddd, 0xf1c5d8ad, 0xbe2cab10,
-	0xf25c40ff, 0xef1fea19, 0x3ce5deb0, 0xf8fb8090, 0xd3bb3493, 0xe4d6f3e5,
-	0x7ef2d1b0, 0xe55f8740, 0x2898eef5, 0x1f1373ef, 0xba77d815, 0x08aa7f1f,
-	0xfbaa42f6, 0x466b7c49, 0x3f75fe31, 0x14707149, 0x61b339c3, 0x484f0db1,
-	0x7b7c3eb6, 0xcbbb8461, 0x403ad27f, 0xe4f4e7c6, 0xc97e9947, 0xb8cdfdc3,
-	0x73f71574, 0xca453b2c, 0x2cf78d6b, 0xd90d9d03, 0x67986c26, 0xdffbadab,
-	0x23929819, 0xf852d1f7, 0xe21b7bd2, 0xac28567e, 0x84572c07, 0x7cc4071e,
-	0x6c5fcf5e, 0x3285f2d2, 0x992acb7f, 0xc5ded56f, 0x3bd9aada, 0x98a44f30,
-	0xedf0f40f, 0xf3043d9a, 0xe0798a40, 0xf21af83b, 0x83c86be0, 0xbe0f21af,
-	0x0d7c1486, 0x51444bdf, 0xfd2a9e72, 0xfb0de33d, 0xf19efe03, 0xfe09b906,
-	0xfe1e631e, 0xf87d631e, 0xf0e58c7b, 0xe1cb18f7, 0xe1e631ef, 0x87d631ef,
-	0x8798c7bf, 0x1f58c7bf, 0x1e631efe, 0x7d631efe, 0xe58c7bf8, 0xcb18f7f0,
-	0xe631efe1, 0xd631efe1, 0x58c7bf87, 0x629d737e, 0xacdd07f2, 0xba503bbd,
-	0xa3e98e3e, 0x2928b539, 0x3ff7d687, 0xc7e7ff23, 0xf3ac54b6, 0x6efc25de,
-	0x47845560, 0x44d373ae, 0x2116eeb9, 0x0e7db9d7, 0x76edf3af, 0xf1942f99,
-	0x03f4a1c2, 0x74f8cabf, 0x0a4157e9, 0xf8520abf, 0xafc29055, 0xfd2ade32,
-	0x57e1482a, 0x55f877c1, 0x82afc290, 0xa4157e14, 0x8520abf0, 0xfc29055f,
-	0xbf07682a, 0x55f8520a, 0x157e1df0, 0xe0abf0a4, 0x038231fb, 0x2e1d15fe,
-	0x26e9f9c8, 0xd0e8943d, 0x4cba87a4, 0xc6f9c879, 0x8df390fa, 0x8df390e5,
-	0x8df390e5, 0xc6f9c879, 0x8df390fa, 0x88f11bf9, 0xef296f71, 0xde41db1b,
-	0x9a73e637, 0x86c1affc, 0xf9c37935, 0x46b69157, 0x2e298f29, 0x9e72eb92,
-	0x58ff059a, 0x1c92b86b, 0x763921eb, 0x8d676fc5, 0x89f892bf, 0x2b976f16,
-	0x6f582dda, 0xbad37bf6, 0xe38282f9, 0x3bfe7383, 0x7f75cb91, 0xbad1ff2b,
-	0xac14ede7, 0x90cb6c37, 0x3dede970, 0xd522a5c2, 0xbbe577eb, 0xbe3a17af,
-	0xa5f98f5e, 0x28520e01, 0x910710f3, 0x1f33bb77, 0x2d5bedf1, 0x5d0b8c8a,
-	0x4372e329, 0xe349aae9, 0x3b2d5b4b, 0xbb50440e, 0x83c562f6, 0x5699077b,
-	0x0f96c871, 0x43e6d53c, 0x89cba89e, 0x6b83e2d5, 0x903c42af, 0x7f6eb70e,
-	0xf7c13e24, 0x0bb746dd, 0x738d197b, 0x8ec217cd, 0x64985bdf, 0xda04f297,
-	0xea1cdf41, 0x0c9bbc57, 0x4732bdf4, 0xff3e7b9e, 0xe8caabb2, 0xb5edd0fb,
-	0xdd1ee157, 0xeed908a4, 0x33478f37, 0x2a34a71e, 0xc9fef09b, 0x8bc2ede8,
-	0xd4bfb1fb, 0xddba1ee0, 0x71e32f65, 0x4eff7c5d, 0x4378b7ef, 0x2c17df32,
-	0x13e3ad16, 0xf0a127d9, 0xde3ae6fb, 0x62af7e68, 0x0fe2c47e, 0x2ffc8ec1,
-	0x7121c3df, 0xc3dcfbf1, 0x6c7866b9, 0xc4dbe221, 0xe40ef95e, 0xabc5e1e4,
-	0xbe5c137a, 0xf2077c80, 0x5f6a2f9a, 0xf966fce3, 0xcf93240e, 0xcf8f8648,
-	0x857e41c3, 0xe298ffdf, 0xe5e968df, 0x15e0bdc6, 0xdfd404b6, 0x0b503c2e,
-	0xaf790906, 0xb6579f55, 0x57096238, 0x95e22f40, 0x11fd0378, 0x7a0198e7,
-	0xf8d8f3c9, 0x56a9907d, 0x46fc0d97, 0x5d8a7397, 0x7542ec72, 0xf7df0c74,
-	0x2e13910b, 0xb8e6f636, 0x8e3d7f8d, 0x93ef83a4, 0xce15df2f, 0xf88f8572,
-	0xb9e6f807, 0x5977193c, 0x91c3ecb9, 0x38aed496, 0x8129d392, 0xf3df78ad,
-	0xe88eea74, 0x11cb0a51, 0xdb5fc087, 0x7be79f1a, 0x5eabc582, 0x1710fbe3,
-	0x96881f1b, 0x7fa4aaf7, 0x9bc34ca5, 0xa85a6f6e, 0x16994fad, 0x5ebc743f,
-	0xe74bcfbe, 0x71f7bf30, 0x72c6d1b1, 0x28bca846, 0x880feb84, 0xb46f2b73,
-	0xc5d3ddf1, 0x27578b6b, 0x777eee8a, 0xcfe32bc5, 0x349771b5, 0xa84e38da,
-	0x2b477b5c, 0x965877f4, 0xd2e8726a, 0x27efe66d, 0x4fe44272, 0xad44fdfd,
-	0xaf5bf14e, 0xa83964cc, 0xee71c6d6, 0xb94857f3, 0x0110ec48, 0xbf9867dc,
-	0xef059c62, 0xe5dfcc58, 0xd0dd28f5, 0x7c9a3bd1, 0x12830934, 0x8a5ea7de,
-	0xed32be60, 0xcfce3f52, 0xe9c894ba, 0xe4b2978d, 0xd11dac77, 0xbca16b4b,
-	0x26beff5f, 0x1c44cd17, 0xb2e40165, 0x1dd74c3e, 0x2218d744, 0x4357e357,
-	0x302bcabc, 0xf9b24fc3, 0x734e2156, 0xf7c146d2, 0x7e432691, 0x90d982a2,
-	0x2fb00aa7, 0x3ef90a52, 0xef8544c6, 0xbe1e4cb7, 0xb407db4c, 0x11f3042f,
-	0x37c3f77e, 0xf1006a7e, 0x3b7db337, 0x7d77582c, 0x6dfcf83f, 0x64e60efc,
-	0x7bc762bf, 0xcf4d3e81, 0x743de9d6, 0xd4882c5f, 0x694e63ec, 0x8fb4eaff,
-	0x9c7e5801, 0xc446f227, 0x2d802eb3, 0xb0b69fb3, 0x6ca8aa84, 0x1b9c9e59,
-	0x94236379, 0x6ed37fac, 0x9162df32, 0xfe489ff7, 0x717578e3, 0xe50fb0a4,
-	0xf92ad78b, 0xe1d79788, 0xd8d87afa, 0x777ac349, 0xe74941d1, 0x03eeccfe,
-	0x5df960bd, 0x4cff2619, 0xf84a5a68, 0x105a3ec6, 0xfc63fad3, 0x5c84d0d2,
-	0x889f1de1, 0xf9f5c877, 0x02e2208a, 0xdbf96ae7, 0x8ff2bd9e, 0x278c9c6b,
-	0xedcd8fce, 0x3fe22377, 0x38fe65fe, 0x7f1ab15f, 0xf14daa37, 0x3de57379,
-	0xdf5809c8, 0x7e76ecc8, 0xa66660c7, 0x212f9e4b, 0x72db9676, 0x845df2dd,
-	0x694b7b10, 0x846f3cb6, 0x8f3c9dd5, 0xb66e3afd, 0x3ef3ea57, 0x33df336e,
-	0x5cead3d5, 0xbff83769, 0xa0f127ba, 0x7ffbde45, 0xf1d812c4, 0xa06bd122,
-	0xe6016fb7, 0xbde208fb, 0xcf1f7e19, 0xa3477f4f, 0xef694f93, 0x74f4e865,
-	0xdf22eeac, 0xda712897, 0x9e81aadd, 0x7c28d6ca, 0x4ea4b11f, 0xadf627de,
-	0xfcbde451, 0x8f57ec1e, 0xdf9af9cf, 0x17fc7a51, 0xc350b211, 0x91fb7cef,
-	0x5d291cd7, 0xdd53fdf8, 0x7f926caf, 0x6f103306, 0x9c36b73f, 0x7afe41df,
-	0x018fd158, 0x87b6647f, 0xf11269d7, 0x1a9fd434, 0xbe29fbe3, 0x07238897,
-	0xf05c6f61, 0x7df8b7f3, 0x29bd9ae1, 0xf161eefc, 0x78d5bcee, 0x61ebe547,
-	0x89723bbe, 0x2e9d8b7e, 0xea90e43b, 0x973e58c6, 0xeed1f417, 0xf6768ba9,
-	0xf3ebe9e7, 0x0794ae60, 0x9c723c8a, 0x453e9a0b, 0x354db308, 0x7fe793d5,
-	0xedd43ee8, 0x95f6a1a2, 0xbe2af7d0, 0x7b029ecb, 0x5760dd89, 0xb631edd5,
-	0x7073e3ac, 0x77b7cf9e, 0xaf8dbbff, 0x4d4776eb, 0xa9d85d9f, 0xe84f66cf,
-	0x9d7fb903, 0xbd1d82e2, 0x11bee9cc, 0x8765f5f1, 0x14f0886c, 0xf2dce293,
-	0xe4bb92dd, 0xb72525bb, 0x9b3f31e6, 0xc7c9358f, 0xbc5187bd, 0x9402cb8f,
-	0xdfbcf7c6, 0x657bade7, 0x53d01ec0, 0xe0f7cbd0, 0x7b5e5ccb, 0x2a2e419c,
-	0xef4c526d, 0x17f9e818, 0x721da573, 0xc019a93e, 0xa6b74ddf, 0xd086f1d8,
-	0x108f127c, 0x46baf837, 0xaa3b7a27, 0x932571c7, 0xf941c552, 0x9dc114ae,
-	0xfe33c722, 0x9349514e, 0xaa063df9, 0xfedd72cf, 0xafee28dc, 0x4ef345d8,
-	0x3862ea41, 0xa78c0f09, 0x3fa87bf6, 0xebc38f37, 0xd80c1a51, 0x8f983760,
-	0xcfca1678, 0x186c0575, 0xbe51a4a7, 0x2b5be28f, 0x89adf1c7, 0x2e40e7b5,
-	0x03ecbab0, 0xa360f28c, 0xbe78cf7c, 0x0411fbf6, 0x65cbcb2f, 0xf3dc2784,
-	0x867defd2, 0x8358abe2, 0xd629acbf, 0xad365f2c, 0xe67d61b3, 0xc35ef0f4,
-	0x971d1a97, 0xfbe18e34, 0x2f5665f5, 0x69f097df, 0xb2ebfef8, 0x27e1bbf0,
-	0x90fcd399, 0x8d79052d, 0x3c097d2f, 0x829e06f7, 0xd23efc19, 0x678e70b2,
-	0xe26ae39e, 0xfbe276f9, 0xe40fc201, 0xe3115715, 0x8fc4e89b, 0x66b2c038,
-	0xc176faf3, 0x65df2513, 0xfde62e6f, 0xb3eac8b7, 0xac708cbb, 0xfb819fdf,
-	0xdf68735b, 0xe127fde3, 0xcc7df1f2, 0xc8dc0f53, 0x3806fbbf, 0x8f28e781,
-	0x3bde027b, 0xba61ba22, 0x4167e9d6, 0xfacfdc81, 0xacc35178, 0xec3f0ed2,
-	0xf7a9f6bb, 0x06f3e420, 0xffd86f5a, 0x76a7da7b, 0x71a4005c, 0xddf265ed,
-	0xab7dd0ba, 0x9f7d57ef, 0xdf56fbea, 0x8ad98fcf, 0x174a8982, 0xbdf3a1df,
-	0xf06eb9f6, 0x77834934, 0x84aeb6ae, 0xc18557d7, 0x986237ae, 0x53f3dfdc,
-	0xfd1ffbcd, 0xbd54dfa1, 0x03306c7c, 0xfaf53df7, 0xe3f3b8fa, 0x03ec3b64,
-	0x30ea5bd0, 0xe5fd674b, 0xe262df5c, 0xfc9da51f, 0x04aafb63, 0x0a1d8ff0,
-	0xdf96e1fb, 0xe5bee523, 0xe17bc8cf, 0xf8bf9667, 0x77aa2cf6, 0x0b8dc1fa,
-	0xca2ff78c, 0x2c5f9282, 0xfc0b7924, 0x0f269163, 0xe5f4cc6c, 0xe7ec330d,
-	0xc99ffbb2, 0xdb98fec4, 0x6f0a7792, 0xf9bcd1a8, 0x3f3fa3bd, 0x5787d2f3,
-	0x5dcebbb9, 0x6b251e7d, 0x3b15b5de, 0xf493788d, 0x0756777e, 0x38a55b9f,
-	0x6953e8b7, 0x61f33163, 0x8f7a4891, 0xa1eeb5d2, 0xa8dc50f4, 0x5a579cb0,
-	0xfea03237, 0xd2ebf22f, 0x8df953b5, 0xf4bd7d28, 0x73f45f77, 0xa67f8757,
-	0x35734eb6, 0x4c3d9e7a, 0xe5b9c3ee, 0xbc45f629, 0xf8ec53ff, 0x5a39cdbd,
-	0xf3329cf9, 0x72f5cef7, 0xd5fbf275, 0x9fb827d8, 0x58eaf584, 0xcbf6936b,
-	0x57ad97ed, 0x1d02e432, 0x9d9ac58e, 0x6f66a172, 0xcbc9a45c, 0x8d8b5eb4,
-	0x71f8b5eb, 0xcfa55eb9, 0xbc17f5be, 0xd3f34653, 0xef93a3de, 0xecb4940a,
-	0xb39b75e0, 0x852d9d66, 0x5864fdea, 0xa8fe298a, 0x05cf36b4, 0x35dcfd3b,
-	0x07e06d1b, 0xf126193f, 0xf3f74a16, 0x1d62f8b5, 0x148f38af, 0xaf473f83,
-	0x83b83e0f, 0x5975b9c6, 0x77f1b478, 0x3d1a02ed, 0xc6c6d697, 0xdad2bc61,
-	0x7fa17be2, 0xe840e7e9, 0x2e113bfe, 0xf50945f7, 0x6279fd87, 0x55ef878c,
-	0x377ed7cf, 0x43feb42f, 0xdafddd1a, 0x4cbfdf26, 0x92796c8a, 0x226a3be3,
-	0xe913e03c, 0x8c01ade9, 0xdc067a0b, 0x2f7c8b76, 0xf5b2bd33, 0xa241c073,
-	0x20f5c73c, 0x105b7bc5, 0xbf2813ed, 0x79ef22c9, 0xdd32aaa5, 0xa607e1a7,
-	0x5e8b9437, 0x5f1efcad, 0x2151bbe7, 0x9b176af4, 0x1fdde0d7, 0xefc12f7b,
-	0xa9f4e9a6, 0xa7d3a3f7, 0xcd3dbf4e, 0x9cf7d76f, 0xcd1489df, 0x49e592ce,
-	0x0bb8d076, 0xbfc41bee, 0xf35df16b, 0x35ef6bb4, 0x4c37ce76, 0x65c7defe,
-	0xfa974df3, 0x6df3cf52, 0x66e84c2e, 0xd4f3a1be, 0x431e89f7, 0x694fe9df,
-	0x1394fe92, 0xd4639d0a, 0x70b2c4ee, 0xe7d3ab8e, 0xbff5dba5, 0x8f87bdef,
-	0xf669c586, 0xc828d6aa, 0xdfb5f397, 0x99411151, 0x86a9f7c7, 0xaff9faef,
-	0xf3a75fbf, 0xdab593e9, 0xef5a28f9, 0x75167ec1, 0xf50f7c69, 0x2889d358,
-	0x627313bc, 0x6f4f848c, 0xde4dab77, 0x76511673, 0xbbcfde37, 0xfe3cd6e9,
-	0x8d8594bd, 0xbd9f587d, 0xf98d2ea9, 0x587e4dc2, 0x1ea74517, 0x83e348b0,
-	0xaf16b791, 0xd7f502be, 0xc2eff0a7, 0x4e7a742d, 0x43f6e7ad, 0x2313903d,
-	0x53daa79b, 0xfa961e59, 0xbb17ee82, 0x7c451155, 0x127c0d4f, 0x3fb2cbfb,
-	0xe2cfe71d, 0x983f52f5, 0xe06b1164, 0x50d81d3f, 0xf82fa134, 0xfc8ac3c4,
-	0xe60d9a3d, 0x0e86bcf7, 0x7c02fa2a, 0xbc5df426, 0x5e2d6d5b, 0xe482a7e8,
-	0x16d1d80e, 0x9e588b3a, 0x93e345bf, 0xf8db9ac7, 0xaf1d7ebd, 0x78bfe08f,
-	0x7ec42aa7, 0x1a276a14, 0xff07d9a8, 0x7b8faf1f, 0x0080003d, 0x00000000,
-	0x00088b1f, 0x00000000, 0x7cb5ff00, 0x65545c0b, 0xce7bf8da, 0xc0cc2b99,
-	0x1245c880, 0x85848b87, 0xd780c034, 0x508151da, 0xb9bba0bb, 0x658e21ba,
-	0x500665ca, 0xd7775ddb, 0xa6a18cfe, 0x45fa7d66, 0x80ed65a6, 0x76c36a97,
-	0xa8283448, 0x59990bc9, 0x6a37627f, 0x5b63b92f, 0xba402de6, 0x6dbfedfc,
-	0xbcf3cf7d, 0x511730e7, 0x6fbefddb, 0x797bf9fc, 0x9f5ef3df, 0xcfbcf3fb,
-	0x8c346339, 0x63181b75, 0x418e8b2a, 0x89486839, 0x8d8c9964, 0x615f6909,
-	0xf6c3894c, 0xc645db25, 0x7cfb4046, 0x1962c893, 0xfa31d72b, 0x1fbf8f7d,
-	0x3c1f7631, 0x42f3c337, 0x07d634a9, 0xcc37d7fd, 0xd6c972a0, 0xf1ae6dc2,
-	0x2509258c, 0x606393b1, 0xb66ae3c0, 0xce258a07, 0x2b307719, 0x8da4d3cc,
-	0x73c325d2, 0xc7292bb5, 0x496f9fe0, 0x0c4943e3, 0xd4699dc6, 0x7b4377cf,
-	0x414e6981, 0xba5f8c14, 0x325b2a33, 0x6f5dfbfb, 0xc91b1811, 0x4673a558,
-	0xcc614b1c, 0x67e1ddf1, 0x1fb0a94c, 0xf304d398, 0x7709e57f, 0xa38ba0bb,
-	0x82492dae, 0xb3aa3c23, 0x7fa058a7, 0x6f31d895, 0x4e73cc12, 0xa04def70,
-	0x5338e6fe, 0xe5a1fac0, 0xccc63ae9, 0xff398ce9, 0xcf3487cf, 0x3b89e2e7,
-	0x8778c016, 0xce047f73, 0x1ff8f553, 0x6c3201f2, 0xb2cf689d, 0x8dbce1e4,
-	0x1c124d7b, 0x56637b74, 0xbee39c09, 0xda46c7c7, 0xf79f2f33, 0xa8b668b6,
-	0xdbcbda04, 0x6957c118, 0xd48ee85f, 0x5eeddc20, 0x696131a6, 0x28689a62,
-	0x956c48cf, 0x52dbca07, 0x06b9a2d8, 0xe10dbb7f, 0x899eeb00, 0x025492dc,
-	0x9f7b15ed, 0x79433248, 0xa5ebc8d6, 0x9c7a7f7b, 0xddff4045, 0xd5e20d5a,
-	0x0b1a62ae, 0x25d7bb8c, 0xb250dcd8, 0x12c668f2, 0x7d6ea310, 0x59b19199,
-	0xaf9a7096, 0x630e7b62, 0xc17dfeb9, 0xab3f6a73, 0x8fb8c562, 0xd903f531,
-	0x8bfca1cb, 0xe21f7bca, 0x7ab52ff3, 0xf1192b8b, 0xfcbc2662, 0x84548b65,
-	0x05fbaeed, 0xfac05636, 0xac1a637e, 0x6ac9165f, 0xf4a17c71, 0xcf049b57,
-	0xb2101c57, 0x787b30b5, 0x1ee6b766, 0xd1169103, 0xd389b559, 0x75768ad9,
-	0x7fe02251, 0x2d408b45, 0x3357950e, 0x2f2abe1c, 0x80e6664d, 0xb6b656fd,
-	0x8eb0cc68, 0x09ce19a3, 0x539e1dfd, 0x5e78a59a, 0x7cb185b6, 0x89fe27c0,
-	0xa53e6bf8, 0x3f0037b9, 0x2e1cadd5, 0xbede56ce, 0x3b900338, 0x1362b699,
-	0x26dea0d2, 0x6b3ebd50, 0xaa35fcc2, 0xfcfe7ac0, 0x9a586935, 0x354c4e08,
-	0xf0025490, 0xa3d194dc, 0xd73bfc41, 0x5d42f3ca, 0x0d5eb01d, 0xde48e512,
-	0xf1c06a9e, 0x3caf1a66, 0xd146b677, 0x6c33af78, 0x3609bb03, 0x61506d51,
-	0x4434ef59, 0x56b3b960, 0x715950cc, 0x09166173, 0x1611dfe0, 0x6122c591,
-	0x3d5eaaca, 0x3b501240, 0xf6845870, 0x83fb48dc, 0x0c719f48, 0x33e802b8,
-	0x06057991, 0xf9dfdff4, 0x7fce2e59, 0x17df18cb, 0x5eaeb60c, 0x017e7d33,
-	0x8b26c3d0, 0x5f4c8e7c, 0xc8f1d22e, 0xb0af4043, 0x6cd5a7bf, 0xcf073e83,
-	0x42e6c257, 0x08c2cc3b, 0xb984dfcf, 0xafdfc0f7, 0xce226f31, 0x54de74cf,
-	0xcc9af71c, 0xc35a25a7, 0xf5f60106, 0x63fb149b, 0x053b8fb8, 0x116cf8f5,
-	0xc58d2071, 0xfe6afd7e, 0xc2796d9c, 0x4ffc03a6, 0xa367e8e7, 0x4062e645,
-	0xf1519aa2, 0xc163a406, 0x60ab6366, 0x0f3307fd, 0x2e80cbdd, 0x31d01e1e,
-	0x5eaf9c2d, 0x7d3dcfcf, 0x0094ec20, 0x2a8f46fd, 0xf4165916, 0x2958ab37,
-	0x29943ff4, 0x9fd8557a, 0x9fd8dce9, 0xbe6d0ae9, 0x8196590c, 0x7a88d0fc,
-	0x78eff51b, 0xca011bf3, 0xe1e2e944, 0xe2573848, 0x3d4b052f, 0x3c1b29f4,
-	0x85fff4fd, 0x5352f4b2, 0xfca1efcb, 0x19bda475, 0xb0727751, 0x501d94f8,
-	0xa3c9b0f6, 0xf9f264b3, 0xf1dff702, 0xa2226fab, 0xfabeff45, 0x7bef4e07,
-	0xcea58ad9, 0xe9b8c022, 0x9b57921d, 0xfa7ef975, 0xa9e361e3, 0x39e18fd4,
-	0x5ba20dfb, 0xe1ffb010, 0xd37f710f, 0x14af0675, 0x17d4e381, 0x38ff3a7c,
-	0x751d1e66, 0x284646fa, 0xb1913ef8, 0x8c3cdc58, 0x7068b81f, 0x6fb9c137,
-	0xa14ff991, 0x488b1eaf, 0xf191e9f8, 0xe991c0a4, 0x7e9122b2, 0x5e8ad5eb,
-	0x4cb385f0, 0xe8d67f3f, 0x5e0cff38, 0xff386d12, 0xcdd6b960, 0x8ec18a60,
-	0x5727d254, 0x007fa792, 0xd740ca79, 0xfb6a97bc, 0xf90fc233, 0x78fc074a,
-	0xc02f0c97, 0x25f9c33f, 0x64bbfe79, 0x1065ddb8, 0x127e9c39, 0x6e992702,
-	0xf650ba14, 0x5863982f, 0x9f1fb469, 0x47ddd7ec, 0x8f099323, 0xe383ffe3,
-	0xdfc213ef, 0x01d62737, 0xff51b11b, 0xfc784598, 0x579fc05f, 0xf80bfeb4,
-	0x9fc50eeb, 0xe23d7f57, 0xd2d171ef, 0x0880fc84, 0x26d2a1c8, 0x0658f9c2,
-	0x932ffe23, 0xe09b2cc2, 0xffe4767c, 0x8fef889b, 0xfc2bdf22, 0x37d8a63e,
-	0x49e4f51e, 0x7dc19ec6, 0xb50f44f9, 0x10a766a7, 0xbac75f9f, 0xf01db013,
-	0xf117379c, 0xe876d82e, 0xfb7d2c24, 0x5df5865e, 0x1ecb0615, 0x5bbf6f38,
-	0xfe61a974, 0x8ef72886, 0xc36eb0a5, 0x1716995d, 0xd59633b6, 0x3ca07286,
-	0xbe7a82cc, 0x85cb8a21, 0xa4e90586, 0x277e0f87, 0x73c2ad25, 0x34b3082c,
-	0x6c86ff41, 0xa01323df, 0x6cd630de, 0x57d74171, 0x1dbe9605, 0xd1d1cfc7,
-	0x38730d3a, 0x323c36dd, 0x057a8dda, 0x7af3cff4, 0x1e593fa8, 0x0d9cf0c6,
-	0x6884b68d, 0x2297cba0, 0x61b3a3ec, 0x4e24a3ff, 0xd0c90dd7, 0xa136e50e,
-	0x387dc164, 0x6fbe78df, 0x17b082df, 0xfa2cc2f7, 0xd0591034, 0xb195727e,
-	0x42a5e509, 0x73a57797, 0x75c63779, 0xc9c2076a, 0xd4659d35, 0x937ffcc2,
-	0xbb814be9, 0x556c6360, 0x0afe1fb4, 0x70c8c59d, 0x7a735617, 0xe5974d73,
-	0xd7733562, 0xe65f080b, 0x96f8070b, 0x42414169, 0xadd93469, 0xe5faefb8,
-	0xf7091780, 0x527fe1cf, 0x619ee564, 0x2847e7f8, 0x4c88f32c, 0x328fe404,
-	0x0ca3f9c6, 0x6fe908e9, 0x0051d015, 0x75df31fd, 0x65c3a751, 0x6bf1823a,
-	0x70d3258d, 0x3f85cfbd, 0x89e363e4, 0x87f34a7f, 0x3656675b, 0xf40b0397,
-	0x9fd899f6, 0x51148eed, 0xf130ae5f, 0x7f644ef5, 0xc5f51a36, 0x79bd5fc9,
-	0x23c7961d, 0x86cb6e4a, 0x7c16dbfe, 0xfce2845d, 0x353e096f, 0x0b6fe39e,
-	0xb468fffe, 0xbf56ca43, 0x43fef449, 0x192859f7, 0xaf4e5032, 0x15a67d04,
-	0xb074e4b0, 0x74463ef2, 0x896ac890, 0xfd65e36e, 0x47a30c05, 0x00f37539,
-	0xbcca8ed8, 0x9747fff0, 0xce896c74, 0xa2c69f5f, 0x7433ea82, 0x0bfd4109,
-	0xcf41c94d, 0x171f8d6f, 0x39a67cf4, 0x3b3ea83b, 0xff505263, 0x82d32ddb,
-	0x9c4e77ea, 0x8e7fd419, 0xdd504e6d, 0x1f244cc6, 0x738aea3a, 0xe1bb013f,
-	0xdc92bab5, 0xe397544f, 0xd0f6aa63, 0xe805b37e, 0x5f3bdb24, 0x91ea0935,
-	0x43265687, 0x11cb537d, 0xf43c4f5e, 0x66e03245, 0xf9d1cb73, 0x53dbd02a,
-	0x45f43c6f, 0x6d1fd40a, 0xa7cfe2e9, 0x40a362c0, 0x39bcb6ac, 0x9af805df,
-	0x8adf629b, 0xa9779af8, 0xf98a28f6, 0xbdccd7f7, 0xb942592f, 0x06746730,
-	0xc53727ec, 0xbf3e10fe, 0x759ef62b, 0x1ffb0091, 0x46ab5b7d, 0x5d98bf3c,
-	0xa1e915b2, 0xf3a722ff, 0x91978853, 0x96097eff, 0x8a61d903, 0x3c92bd9c,
-	0x03adf854, 0x1512c6f4, 0xa54749c2, 0xe544ceb7, 0x2a78baa1, 0xd999d48f,
-	0x57638012, 0xc795065d, 0x7ed42cea, 0x95226ebc, 0x546cea27, 0x4c575bbe,
-	0x095d7765, 0xb2ff0a95, 0x6a0d96bd, 0x2a974224, 0x4fceb4ea, 0x63d2578f,
-	0x69d92820, 0xf9d09f05, 0x39adbd4d, 0x9d75ce9b, 0x6959e909, 0x81f9da3f,
-	0x9dfa0459, 0x3d11d56a, 0x9b74354f, 0x475e5675, 0x22fbb8b9, 0xbc118af3,
-	0x5fb02a9f, 0xfd1b278c, 0x030ea998, 0x841b4bf5, 0xefd8597e, 0xf79404cd,
-	0x16356b53, 0x509e63b4, 0xf61e9733, 0x90df146f, 0x20e31d70, 0x05d86cca,
-	0x903ad518, 0x6ba07157, 0x63f439f1, 0x0f77283a, 0x4746f5f2, 0xf9472ed7,
-	0x60ccba34, 0x95f2e7a9, 0x08e24be4, 0x2fee026f, 0xda86a571, 0x198f628d,
-	0x9d5f60e5, 0x69d21677, 0x0ae72c81, 0x30ef5c34, 0x80bde411, 0x576dfb7c,
-	0xedf3da22, 0xd02f9edc, 0xfa44ec96, 0xfe7156ae, 0xf77a3165, 0xd5475c1e,
-	0xf42cf15d, 0xb44d89eb, 0xc568426c, 0x6069641f, 0x14d617b7, 0xeddca267,
-	0xaf885b61, 0x13fd5ec1, 0x338fdbd2, 0x9945df81, 0xf89e6048, 0x4da6f0e2,
-	0xd7adda02, 0xce5d21e7, 0x300f9ad5, 0xf65f07e0, 0xdcfbd100, 0x7a1e7348,
-	0xafecbe0a, 0x7cce3d79, 0x26e78040, 0x00bf3036, 0xe9cf55ea, 0xf0049f4d,
-	0x1513d3a9, 0x4b69af54, 0xc0127d30, 0x07f855a7, 0x09b747fa, 0x0ebb942a,
-	0x04a72b79, 0xb7c405fb, 0x0d73f8b3, 0x0680dfdf, 0xd98bd8ed, 0xb06fa266,
-	0x0fef4997, 0x9bba34cc, 0x2371bf60, 0xa057b36a, 0xce6994fd, 0xea497ec3,
-	0x63f40881, 0x1555bffa, 0x19efc9bb, 0x78c9f888, 0xd33d7d3f, 0x287b5121,
-	0x70e6b5dd, 0xcd26af7f, 0x50f119b0, 0x51d3af1d, 0x88b171d9, 0x92569d91,
-	0x4db97686, 0xd0cbfdc3, 0xb8737bf1, 0xaf5e491e, 0xa240b921, 0x0b6cb608,
-	0xc5dd4a63, 0xf8d63226, 0xbf21b08b, 0x34c9c007, 0xc83f6563, 0x41476235,
-	0x1b7f505a, 0x8e7a1ff6, 0x8ff31cf6, 0xbb49794f, 0x5e4aad63, 0x2965e90f,
-	0x183fa373, 0x72abc72a, 0xc0b965a3, 0x8c74fcf1, 0x9cf111be, 0xe77d0126,
-	0x504cc950, 0xb2338626, 0xd75f1337, 0x773e91bb, 0xa7fd39eb, 0x2ddcbc89,
-	0x309afef2, 0x577a42e6, 0xb94d87fc, 0x79b929f6, 0xe6978f34, 0x91b25a91,
-	0x879813ae, 0x24ec57d6, 0x43d81fa5, 0xaa02127a, 0xd7c47481, 0x161c4954,
-	0xa672279e, 0x448ce515, 0x4fb1b0fe, 0x5f77e403, 0x40aac478, 0x78e355fc,
-	0xe9b8e043, 0xef194e34, 0x4fb2255c, 0x245c9047, 0x89a6723a, 0x4b562fe4,
-	0xfe8088ec, 0xa0d6eb16, 0xf5c6539e, 0x14fc1c82, 0x9047f0f0, 0x087e588b,
-	0xffd710f2, 0x2c43c833, 0x10f20aff, 0x3c824fdb, 0xf207d2c4, 0x063fdb10,
-	0xbce58879, 0xe4568dbb, 0x69b69a9f, 0x7e20d3ec, 0x017ddb50, 0xc369def5,
-	0xa64391d3, 0xe1e4dea3, 0xe1cbaf9f, 0x2def457e, 0xa0fd9f1c, 0x00ffd1bf,
-	0x8a6b5cba, 0xef1eb2be, 0x1ef9b237, 0x7cb6d380, 0x27f4876e, 0x1cd2faf0,
-	0x226dd535, 0xb7e38edb, 0xfaf86be5, 0x3e396229, 0x79f345b7, 0xb245d37b,
-	0x9e4ea69f, 0x9e0724b6, 0x3da162db, 0xbdef5fc7, 0x8db73f81, 0x7a43ede2,
-	0x253e7e56, 0xeff8a4d7, 0x652fdce9, 0xbd012764, 0xff4afcd3, 0x3e7226f7,
-	0x4eefed0c, 0xc3dd8b13, 0x992de3c0, 0xd02f896f, 0x483e469e, 0x6a8be00e,
-	0x4285f133, 0x55fd0a87, 0xa73872e5, 0x073a6569, 0x43f042dd, 0x3a72831d,
-	0x25f64f4e, 0xe0c6c5c0, 0x9905bb3c, 0x01f9425f, 0x0a07d44a, 0xa07c283f,
-	0xf0227bd0, 0x3fed1099, 0xf421cdc7, 0xca8f94aa, 0x358ee8e7, 0xdaf09cfe,
-	0xdfa136a1, 0x87cc3377, 0xc1c513e3, 0xfe46ef77, 0xd19a358c, 0xc87c2cf5,
-	0x1c9c3b50, 0xc2effaeb, 0x570b9143, 0x7065c780, 0x5ff2f0d0, 0x39c90385,
-	0xbf48e394, 0xfdadc8c3, 0x5db2d139, 0x44f7e9ce, 0xd21f6d8e, 0x57a0bf51,
-	0xafd0dfa1, 0xd9dac367, 0x7f39f2db, 0x05547428, 0x89eb103a, 0xcbd4ce78,
-	0x9e729ee5, 0x632e73a1, 0xc2d2ff24, 0x9e287b78, 0xc8057395, 0x0139c3bf,
-	0xb8c61ff1, 0xd81d717d, 0x4d4fe817, 0x3ed335c9, 0x567e47fa, 0xcff995b6,
-	0x6f0e477f, 0x88944a7f, 0x32fd141e, 0x8b482ed4, 0xe90664e6, 0x3f42661d,
-	0xfc4b53af, 0xe67f05ee, 0x3e871825, 0x3fe49b21, 0x71e320bf, 0x1158fe70,
-	0xafbebbed, 0x63d42e0d, 0x4e06a37d, 0x6fbe300a, 0x6436183b, 0x136ed897,
-	0x07deef40, 0xd4f5063a, 0x2c7b9005, 0x7273b19d, 0x73cfa11c, 0x73fa24f1,
-	0xa6243b35, 0x3b4a5003, 0xf4879abe, 0x6d53b4b4, 0xf6d0b8a2, 0x3d218ec7,
-	0xcc156e9e, 0xb5f49768, 0xbfa1f1c2, 0xd6e8c1b3, 0xa822ff43, 0x0665ff63,
-	0xd7ccdb8d, 0x4383f8a3, 0x7d53ef5e, 0x85c60a75, 0x1350ec66, 0x2f3e97dc,
-	0x3b3ed1b9, 0x0aa57dbc, 0x02dda7eb, 0x4571838b, 0x04aeead2, 0x2d3e57a8,
-	0xce30b458, 0x8b3a2861, 0xe7ca82f1, 0xf30bc599, 0xc918b657, 0xa0da5dcf,
-	0x6017d8fe, 0xb7bb945f, 0x29eed06a, 0x5edc19df, 0x0eb83bb9, 0xeff922f8,
-	0x00f68668, 0x8e6dfcf9, 0xcdec8631, 0xed1b2c71, 0xe3c0d64d, 0xbf7c8ab9,
-	0x71756edc, 0xcb82ba39, 0x8cbec66d, 0xea5f7f45, 0x63e92afc, 0x91cfaf03,
-	0xfea0a7eb, 0x2f1c57f9, 0xe5aa5c0a, 0x604f3fb5, 0xb79c0f56, 0x426f53ba,
-	0xfdbabfff, 0xb71811ef, 0x51f309af, 0x22bd9f7c, 0xdbded099, 0x10b926d8,
-	0xfd0ecebe, 0x56e0112e, 0x8d3de07d, 0x5f7088d9, 0xadcaf64e, 0xe31eb5cc,
-	0x64515edc, 0xdd4744dd, 0xb666a714, 0x4f38a581, 0x84debb5f, 0x2bf54076,
-	0x8ddd741f, 0xd30203f5, 0xfb471e23, 0xee964e88, 0x2da58640, 0xfbe426dd,
-	0xbc4244e9, 0x913d9e22, 0x8865af84, 0xe033c477, 0x212cf11d, 0x51bc713e,
-	0x2274e6e3, 0x73f4fd51, 0xde0abf1c, 0x1acda48b, 0xe46caf6c, 0x63b19e78,
-	0xa230b6cf, 0xe9933503, 0x7a7ef080, 0xa6bbc727, 0x14669d73, 0x08636fd2,
-	0x876bb41d, 0x77f700e8, 0xe0841d19, 0x8df002bf, 0x0e942072, 0x93dff142,
-	0xd806e5c3, 0x429fa7df, 0x7e08dbfb, 0x23c7f301, 0x1ef55646, 0xcaf5818d,
-	0x973bcfa2, 0xf8d8fb43, 0x08da5897, 0xe4157f8a, 0xe66bfc62, 0x5d10eb3b,
-	0xc85eb33d, 0x57a97a46, 0x813cf6fb, 0x70a88b71, 0x27f4e38a, 0x32f9d9cf,
-	0xfa20bb9c, 0xd816a49b, 0x5a6bcd7f, 0xc928deba, 0x35ec8715, 0xf129978c,
-	0xc533c074, 0x5a1d9cc9, 0x2d6b171e, 0x73fa05b4, 0x5cfc09fd, 0xb2819a85,
-	0xc017e8e5, 0x608eb87c, 0x555e7ee3, 0x28178f07, 0x1295597e, 0x8e0e6837,
-	0x77a6081b, 0x2e455fa8, 0xc6a55f8f, 0x3b466cdd, 0xb3017ebc, 0x4d5ea587,
-	0xcc78f03f, 0x74dfb2d3, 0x0af1fb45, 0x1bb1427a, 0x6e382b99, 0x65a9c8a1,
-	0x8f1ef913, 0x6ab8e2fe, 0x76fdc604, 0x8a8f840b, 0x704f900e, 0xdab70ade,
-	0xf802166d, 0x19ffee49, 0xedc01bd2, 0xa0f6ab8c, 0x19dd2128, 0x990ebf68,
-	0x8e91ab3e, 0xd695bce0, 0x9cf02237, 0x38ae590e, 0x7f148dda, 0x8a5b64ab,
-	0x612aee90, 0xf430ef3d, 0x0b5cf954, 0xa2d729f9, 0xaccec527, 0xb7ee0d6e,
-	0xce487731, 0xe01eff8c, 0x396401bb, 0x992e7bd7, 0xf12332fe, 0x99906fde,
-	0x879f9123, 0xedc09ff4, 0x5cfe4537, 0x3c581dbf, 0x6e71de60, 0xac05531d,
-	0xa673e37f, 0x4f78faa0, 0x9bff507c, 0xcf41ccda, 0x4119bdb3, 0x598f73cf,
-	0xdd79ea82, 0x4ffa8313, 0x5416d0f8, 0x0e2be49f, 0x4ce53fea, 0x307d5049,
-	0x9573ce13, 0xe35bc1fb, 0x33fea085, 0xf9a0facd, 0x05446767, 0x320d07d5,
-	0x52bb647c, 0xce5f77b1, 0x686ef6e5, 0x76f7c0a9, 0x8a3af04b, 0xc4e77ebf,
-	0xd8e6f5e0, 0xa1fbd782, 0xfa0bd978, 0xc27e0554, 0xb15fa073, 0x13f81dfc,
-	0x9a13f02a, 0xfac09fc1, 0x604fe08b, 0x027f01e9, 0x7f025fdb, 0xe0adeb02,
-	0x20fd604f, 0x6f583ff8, 0xf2a62bab, 0x6a12ba95, 0xbafc16bf, 0xc98f75e4,
-	0xd7971eeb, 0x74e177fd, 0x5def9e42, 0x9c6ebe79, 0xdcffcd2f, 0xbc563c59,
-	0x2d3cfc04, 0x87c6acfa, 0x5f0ac37e, 0x062dc611, 0xc61892de, 0x7ddd99a5,
-	0xf5062eac, 0x338a08d9, 0xb78192b3, 0x7d52ae31, 0xc9b4d520, 0x0fecfa8c,
-	0xbef3e2ef, 0x7c8cc956, 0xefeda879, 0x85cf3811, 0x5f74614b, 0xef107a4a,
-	0x5461bf1b, 0x31cf04df, 0x05b33a0e, 0x37e90804, 0x0bb7e90f, 0x4ddd4a69,
-	0xcd25bdf7, 0x53c41a2d, 0x3c29f215, 0x0ea3cb7f, 0x635cfe7e, 0xf61373d0,
-	0xe54ab287, 0xb9c238a6, 0x2f3e6536, 0xf1a477f5, 0xcf73cf7b, 0x053f5e1d,
-	0xe2cb6ff5, 0x5e7f7811, 0xec5efcd5, 0xc7c157bd, 0xc85f07e7, 0x76cafba4,
-	0x9fe0cf98, 0x96aed9cf, 0x8eff7ceb, 0x68a296b4, 0x02cd1c54, 0x05c50b1b,
-	0x5fee85b6, 0x38f6daaa, 0x65556e50, 0x0066addc, 0x248f7e9f, 0xbdf837c7,
-	0xb8c4c391, 0x22f9e71d, 0x5f57ef02, 0xc3bd1cf7, 0x38edf886, 0xf6eb811c,
-	0xfe414ab7, 0xb72b68d3, 0x355b478f, 0xad0bbf84, 0x5ef02387, 0x30e7a377,
-	0x4bcabb87, 0xd7243fe7, 0x7824a1fb, 0xfe7449b7, 0xd0624b8a, 0x5586763d,
-	0xb66679a2, 0xb9e2358d, 0xbd7c3c7a, 0xb799ab1c, 0x825e2da7, 0xbf1e3ffb,
-	0x7b224f20, 0xca350410, 0xef661bf1, 0xcaa43b41, 0xf386d923, 0x79e40aef,
-	0x4e9cd4bb, 0xdfdb4adf, 0x78f8f285, 0xd26c88f1, 0x699f8a11, 0x916f76e5,
-	0x7a869ec6, 0x3660c7a4, 0x583f9d22, 0xfc446a9c, 0xdb12c21e, 0xec69778b,
-	0xe6c7bc06, 0xba98f5eb, 0x7aee9023, 0xb425735a, 0xf2f99477, 0xe88775e5,
-	0x2e6f087b, 0xbbb953c2, 0xf8f380d1, 0x73dbc7f1, 0x7fea26ac, 0x3cdefddc,
-	0x327aabb4, 0xe92ec9c2, 0xa7f230d2, 0x5db99aab, 0xd891d3dc, 0x924f7818,
-	0xf2fd9563, 0xdaf0910c, 0xfb96a6d7, 0x0587bddd, 0x39d353f5, 0xde0eec2f,
-	0xea7dc98f, 0x1dc7b451, 0xf50c4b4f, 0x1b5d43a2, 0x6cffe78b, 0xcafef067,
-	0xd43b3865, 0x00d8d8de, 0x0fb4757a, 0xe8818df1, 0x13e15dbc, 0xc153e133,
-	0xb7064f63, 0xf9e27ae7, 0x65a3a4bd, 0xe5f5d10f, 0x64eea4f1, 0x7f121ff4,
-	0xe778a3a9, 0xc567fcb5, 0xaff0086e, 0xea8bfa18, 0x313cd4e2, 0xbc1f6fc5,
-	0xb6ab6b96, 0xabbf448e, 0x1ecafc84, 0xac2cf606, 0x3a7b44e9, 0xb61ff292,
-	0xad83bae1, 0x76bfba6a, 0x7d66daea, 0xa0d97602, 0xf6051805, 0x2d53b83d,
-	0x0cd97bdf, 0x952ed768, 0xcccfdaed, 0xf4097cf6, 0x488d73af, 0x866473e7,
-	0x27d31f91, 0x5bcfbdcb, 0xbb24ef92, 0x426498e1, 0x8786687f, 0x668ec1db,
-	0x7b56d76e, 0x2a63ff92, 0x6acdedda, 0x8a60d4cc, 0xed94e21d, 0xddb2d390,
-	0x80cd7a7b, 0x4e9bfc86, 0x8c963d81, 0xbb5b2a79, 0x33b9e112, 0xb3d91673,
-	0xec99a94e, 0x83db6589, 0x6fb007ed, 0xcf55ea82, 0x7217da85, 0xdc13cb7c,
-	0xdb87f8ae, 0xc67643ac, 0x0a67f438, 0xc871a9a5, 0x78c82f0f, 0x959bfc55,
-	0xb7942de3, 0x9e6551b3, 0x1021c4a5, 0xfb9d355e, 0x6edf702b, 0xfc859847,
-	0x10af558d, 0xe4bffb5c, 0x3c7f4c7e, 0x33f47823, 0x36fedf0e, 0x6a35e74e,
-	0x48f98dc1, 0x34b64035, 0xaf704e9f, 0x6bb338c1, 0x13e48230, 0x17c8c563,
-	0x7f70162b, 0x5f3186d5, 0x7e156b28, 0xb7abd108, 0x54527ca8, 0xb3689c80,
-	0x02bf50a6, 0x3ea3b30d, 0x90b4695b, 0xe3a31b7e, 0x6ae17a76, 0xc3d2364f,
-	0xb5c7f018, 0x31f8f101, 0xfb010186, 0xc7807eed, 0xc27895ff, 0x1d49951c,
-	0x191fa015, 0x95fd435b, 0xf0a241f9, 0xdf9ad7f1, 0xfc1bf304, 0x23bc03f3,
-	0x585fde11, 0x93b7a42d, 0xfff728e6, 0xca97c4b5, 0xbd002e79, 0x63181c61,
-	0xc7378834, 0x9fc837ce, 0xf5eeb273, 0x8228ae38, 0xf708a3ef, 0x5e30f583,
-	0xe79651fe, 0xbcbc79b1, 0xf9152e4d, 0x7b6790d5, 0x95f50adf, 0x593ff679,
-	0x8899ae49, 0xb4ca573e, 0x9c4cf602, 0xbbf9186f, 0xf0891de2, 0x03f005fa,
-	0x5ac2fbf2, 0x64169cc1, 0xaf3a712f, 0x3cec4de1, 0x454ef4f3, 0xdd6cb838,
-	0xc6d79819, 0x5a2d7f38, 0x05a737a5, 0xbd2007de, 0x0251ffa3, 0x2fd1f2ff,
-	0x5372bfe3, 0x57946dc5, 0x8cd62ab5, 0xc83517f7, 0xa6d7290f, 0x87ba50ff,
-	0xb7a44edf, 0xa0b5a66a, 0x0b69a97e, 0xa1516e7d, 0x084dfe3d, 0x74c9245f,
-	0xe81768da, 0x5bf1bd7e, 0x95a38f15, 0xbb37140a, 0x4e911a0b, 0xcafd87e9,
-	0x7e71b9a7, 0xfba0b3cc, 0x391886ae, 0xee862bef, 0x9f227ee1, 0xf7952eff,
-	0xa3efe40d, 0xc6324f6a, 0xf93a8e71, 0xe602d53d, 0x52dd7ba1, 0x6f654dd6,
-	0x2f01f578, 0x8d1aee4d, 0x7607f87e, 0x1a91c52d, 0x511936d7, 0xb5b166ce,
-	0x031fbc26, 0xfbee7936, 0x1bdb2bdc, 0x9468f7a1, 0xc7e7959f, 0x92bccaf3,
-	0x83a03cf8, 0xf8a38033, 0x57c7cb9c, 0x02207fbd, 0xfefe7ee1, 0xca7ef3fd,
-	0xb9020fd0, 0xd654f305, 0xbdd064b6, 0x67758b8c, 0xabf1fbe4, 0x1fc153e0,
-	0xf08399b4, 0x0eb9670a, 0x0d9f33e0, 0xd36e63e4, 0xc0a9f0b5, 0xf03d4939,
-	0xe8250463, 0xa1439231, 0x5ee05678, 0x3cd56acd, 0xeefb56fe, 0xb3ffe802,
-	0xed19a2b5, 0x7ef0cbca, 0xf578fc0d, 0x28d791fc, 0x257b3f90, 0x5a78297c,
-	0xff54bcc8, 0xfb8f8a30, 0xf144a170, 0x7c69ffc3, 0x4bd9e435, 0xb7c2aef2,
-	0x257a7ca1, 0x2ab45cbe, 0xf8437f84, 0x2d2f8874, 0x7f002ff0, 0xc41155f6,
-	0x1d7e0a8f, 0x5193f066, 0x2d1875ff, 0x3e39766e, 0xfdc5dfd1, 0xec0ab654,
-	0xf087e149, 0xe3fc8fab, 0xad017c50, 0x541f50d8, 0xa9f305e7, 0xc92bc782,
-	0x7dee452d, 0x4d47bcc4, 0x7067dd02, 0x9685fe3e, 0xfb94e9f2, 0xe2dee50c,
-	0x6fae3cd1, 0xc08fcb42, 0xa27bc16e, 0x233d194d, 0xd5ebded1, 0x7bf0f328,
-	0x74d68fd7, 0xcd7cc68f, 0xb2f1a68f, 0x4cf3c357, 0x8c2dba94, 0x4a3f03c7,
-	0x6e10bad0, 0xa6e3091f, 0x91f01da3, 0x783bcbf0, 0xc6634e3d, 0xe9b882fa,
-	0xaaf7a826, 0x83e1f895, 0x5376fcb2, 0x0982d1f9, 0x604fd405, 0x661e1047,
-	0x3ad09581, 0x0c5d1082, 0xe7e8f9fb, 0x5ef07363, 0x03ff3940, 0xf48e3c79,
-	0x431cf91b, 0x095ff6f1, 0x045f6f14, 0xf784c3aa, 0x289fd302, 0x93f6814e,
-	0xa6cd4ebf, 0xc115cafb, 0x4dfea3eb, 0x56e538a6, 0x4b96e79a, 0x99c5ea03,
-	0xe90d7dfe, 0xbc8b82cd, 0xa0d8c97d, 0xf45b667c, 0xbb27ee38, 0x8f512353,
-	0xf06d7a29, 0x60437ed8, 0x1cacf51c, 0x8faa1e77, 0x5029247b, 0xf7b1be2f,
-	0xa79c74e1, 0xb2cae35c, 0xf98f3018, 0x1fb424a9, 0x943ef7ca, 0xdeed764e,
-	0x9fe8e98d, 0x9c3d3794, 0xb87aa36e, 0x1523fc9d, 0x7df9f73f, 0x0a6d7693,
-	0x9d6fa3b0, 0x52fbedc0, 0x68851bdd, 0xf1bacedf, 0xb71875f3, 0x816bfb1f,
-	0x590b70e2, 0xb7d43af7, 0xaf9c1965, 0xe48e8358, 0xf747cc3f, 0xddc67ba4,
-	0xfee51bbe, 0xabbf8cf1, 0xcdfea097, 0x657cd153, 0x0e39bdcc, 0x041b6fe3,
-	0xfbf9bf8a, 0xd77ba68f, 0x4d056bc5, 0x51ea0c7c, 0xc7fd779e, 0xe38228bc,
-	0xbbb21b3d, 0x356cbdb0, 0x75a59f6f, 0x3ce0f6b7, 0xcf28684f, 0x4a65140a,
-	0xf63dc049, 0x3df8f31f, 0x72cda2dd, 0xcebcb1be, 0x8db16dd8, 0xa3fce781,
-	0xfe567f8c, 0x3b83c901, 0xb6dcbc65, 0xf123bdfa, 0xdaa46f30, 0x2b9467fe,
-	0x3a7e3eef, 0x4159e50d, 0xa44cd9f4, 0xfb1ab1f3, 0xee781593, 0x2bc52d26,
-	0x528959ad, 0xb9cff41c, 0x5863da7f, 0xf8bd5a2e, 0xfb8c0ac9, 0x1f91d76e,
-	0x856feca6, 0x5fd11660, 0xd3f8dc3d, 0x676e107b, 0xa479e71e, 0x8faf1a2b,
-	0xe2fe5abb, 0x1f3c75b3, 0x1d3af9fc, 0x99d42f95, 0xb88e1998, 0xea9e2eaf,
-	0x5333afbf, 0xfa73e6c9, 0xaea6f252, 0xa5ee5f34, 0xb65bca30, 0x1e51d06e,
-	0xf6d6ae7d, 0x6bc01e55, 0xa6ce0dec, 0xc6b9f28d, 0x576cf8c2, 0x83840cf2,
-	0x2ef2e375, 0xe54f6134, 0xedeaff71, 0x64490d9e, 0xf53eaf87, 0xcf3c054c,
-	0x0ef92fcc, 0x5e76ebc7, 0xe1c178a4, 0x10ca87f6, 0x5a4de5de, 0xdcf93e7e,
-	0x8f4f1e67, 0xbce3127b, 0x7fc9a96f, 0xea79d9af, 0xde508d99, 0x26b979bb,
-	0xe87fde90, 0xf795bf79, 0xbabe2d73, 0x75fe1c12, 0x89387abe, 0xf809a7f8,
-	0xe7dff32a, 0x6bd59aab, 0xf3737e08, 0xc3e6c64b, 0x5da8cffe, 0x674fc849,
-	0x744cddc6, 0x0814eaee, 0x571c8afe, 0xf3e6a7c6, 0xd12ae8fb, 0x48ec99b3,
-	0x057f8e59, 0xf7c2239e, 0xd2cff68d, 0xaafe8ed1, 0xcf55c16d, 0x3d0eb07d,
-	0xe99b8c22, 0x9e7d0ca8, 0x62a7b1af, 0xc8be715e, 0xe7d0e7ed, 0x712be7b7,
-	0xc5b71e78, 0xa790109f, 0x458d84e2, 0x13fea346, 0x972061bc, 0x9eb76d9d,
-	0x06ffa155, 0xc1c7e17e, 0x38fb2876, 0x695faf40, 0xab2ad7bf, 0x5f951e71,
-	0x50f84eee, 0x3d00de64, 0xc617c93e, 0x0eeb01bc, 0xa6d02bf9, 0x049efba1,
-	0x37880b92, 0x6bea87cc, 0xf584d71f, 0xc78e1ab3, 0x97e083be, 0x930cb8f1,
-	0x3ce7fdf2, 0x0b3e7edb, 0x79e86ce5, 0x4f395fab, 0x7b68e1f4, 0xe740a2e8,
-	0x9556799f, 0xbff3ed75, 0x167cf7b1, 0xdaacefe2, 0x57fe8f97, 0x8597c69f,
-	0x957ea878, 0x157ff3cb, 0xc57b4a0e, 0x138f0d06, 0x23f2260a, 0x140ba50b,
-	0xc63be807, 0xedd500e3, 0x0e9e48bb, 0x4c78f076, 0x145dd88d, 0xda8bf187,
-	0xcf285d53, 0x5fb9e306, 0x28dbf306, 0xd65521cf, 0xa481aa83, 0x1ed72039,
-	0xee07a219, 0xfe419e0f, 0x1e3ce0d5, 0x6561e507, 0x2bb43385, 0x433f21ce,
-	0xe4aad97b, 0x67e748f5, 0x507323dc, 0xf59dbe3e, 0xdf8a6a8f, 0x926e1ebd,
-	0x30958ec8, 0x4e0878c7, 0x4b70e743, 0x2987d13c, 0xb3387176, 0xd1abf405,
-	0xbf24ef98, 0x9fbf38fa, 0xf381b9ab, 0xf3857b13, 0x1bed7393, 0xf980f89a,
-	0x93f3257e, 0x7ace4f62, 0x97c41ffd, 0x9edae70f, 0x470cbe40, 0xc5f38859,
-	0xb51e5247, 0x72871ef2, 0x90e8691f, 0x8962f8fd, 0x49b4d79e, 0x58e5ef0c,
-	0x0af291bc, 0xca16d98a, 0x3cc59cb7, 0x8f5e7953, 0xf029d1ef, 0x52ebf67c,
-	0x81a1e62e, 0xdbf74d3d, 0x34f66145, 0x15ead3cc, 0x1eae1905, 0x7d009ceb,
-	0xf73e7ef6, 0x024aa757, 0x8481b1e9, 0x6653b270, 0xe29677ce, 0x5a7e957e,
-	0x9833eb91, 0xe62cec87, 0x7bc2c81e, 0xc81de655, 0xa556fbc2, 0xc3d7bcdf,
-	0x322f496b, 0xc05e758f, 0x79f3a73a, 0xbc0bf3bc, 0x5279071f, 0x16c3df23,
-	0x436edf4a, 0x27456b7f, 0x15ec7fbf, 0x3cc03f93, 0x19c01733, 0xf01e7af1,
-	0x63fd436a, 0xf21b3667, 0x6e91f8cf, 0x7d9a9fe4, 0xbd7cc302, 0x136d76ea,
-	0xd5aa85c6, 0xe7a458be, 0x6bef6d8d, 0xf06b9e90, 0x8e3c765e, 0xdcbc7267,
-	0x35bf7944, 0xf5efc626, 0x00ffaeda, 0x63ce76e3, 0x553a8b5c, 0x003c51ef,
-	0x57ae36e5, 0xfe42dad5, 0xc97983bf, 0x073477ff, 0x3c60cdd3, 0xf287e78f,
-	0x737ce9c9, 0xdccc7f10, 0x1e63f9ce, 0x681b73e6, 0x675fc538, 0x5d91c7c6,
-	0xf1c71fe2, 0xafce9360, 0x3fa63b43, 0xfc7ca045, 0x5ad730fe, 0xe95c8fb4,
-	0x7fe9aedc, 0xbd2b05ed, 0x5b73a3f7, 0x3cf98c7f, 0x733bddb2, 0x149556c3,
-	0x1d999fb0, 0x1fd8de3c, 0x120fcac6, 0x21d7edde, 0x25b97c3e, 0xbe31f267,
-	0x777819a3, 0x4483c60a, 0x3d0d1f1e, 0x6b8e5d87, 0xfdfc671c, 0xb3df6528,
-	0x3cb91313, 0xa3a26e63, 0x5bbf392e, 0xc651d7c9, 0x504132df, 0x9fb8d1ee,
-	0xfaae5824, 0xd7de1a5e, 0xde2b9e60, 0x3bf960d7, 0xef161f39, 0xa2feb06b,
-	0xf78b0f9c, 0xf78ed835, 0x956f5835, 0xbef161f3, 0x5f78eb06, 0x722be583,
-	0xdc71ec3e, 0x6df1e52a, 0xa2e90a7c, 0x946d790b, 0x1d1bdebf, 0xdc151f52,
-	0x085a37bf, 0xa8128fae, 0xc6c269bf, 0x78ff30a7, 0xc52f9293, 0xc3b446cc,
-	0xfbf9c22a, 0x7b06a91a, 0xf3f404ec, 0x45ed778b, 0x9bf81e7f, 0x882b9fde,
-	0xef4a505e, 0x1968c497, 0x27dba3ca, 0x804f47d8, 0xcd8ec7f1, 0x724adb48,
-	0xecf74f52, 0x31bb3fbd, 0x6f7ae292, 0x25824c49, 0xaee465a7, 0x9a7d42b5,
-	0x85fa2041, 0x512a6ef9, 0x67984cfc, 0xab62c746, 0x1307cb8a, 0x9285cbda,
-	0xb3ae0963, 0x8b9f4122, 0xd588f872, 0x51fb819e, 0x6a345de0, 0x45da1a59,
-	0x07f36a5d, 0xbd759f18, 0x57e866a3, 0xa53c7129, 0x69d693df, 0x99bfb8f9,
-	0x736ba919, 0x36607e70, 0x0d367794, 0xd9fdc66b, 0x9ea170c4, 0x855997e4,
-	0x027f20f2, 0x66e99ba7, 0x357b1f6e, 0xfa345566, 0x62d361f5, 0x4bb75ef0,
-	0x1931f3c6, 0x3c65c7cf, 0x81573de3, 0x6173df8a, 0x585cf789, 0x2da3e686,
-	0x4db12fcf, 0x240f7820, 0xcdb3e605, 0x0097df92, 0xd4f7a10a, 0xf31c729c,
-	0x34ee594b, 0xcadc95e6, 0x9e6879c7, 0x778e392a, 0x6f7c1d5e, 0x8ff38ca8,
-	0xbdce5467, 0x166bcb89, 0xbf79e1a9, 0xe61731d7, 0x397dcf15, 0x7d50e281,
-	0x06a5d16e, 0x5e05cfbc, 0x5ec67947, 0x8b2efee6, 0x77337ce7, 0xabf51c7f,
-	0xcea9e397, 0x7c74eee8, 0xe64fa3af, 0xf07ea52f, 0xe4979e3b, 0x81ba81cc,
-	0xf3a123de, 0xa776e739, 0x4fbd4147, 0x5f488bd0, 0xbcfe26ce, 0x673fe647,
-	0x7c9f3c8a, 0x24f3a61e, 0x3bfa3e21, 0xf7c24e5f, 0xbc193710, 0xf7fcb94b,
-	0x66dc93a6, 0x6fcc74de, 0x4e782f3a, 0xadf1be62, 0x98a5296d, 0xed5e7f6f,
-	0xb3eb0679, 0x5d78d2db, 0x0a693968, 0x93d23e7c, 0xb7c8f984, 0x6296a5b6,
-	0x91f9f23e, 0x5944cf2d, 0x97eaea02, 0xcd73e24e, 0x98a56983, 0xeb5b3c9f,
-	0x7487563e, 0x5f4e7bf3, 0x4e077dfa, 0xdaaa7c23, 0x7d3efdb9, 0x2f0b81df,
-	0x603e7ea1, 0x7582bca4, 0xdf099213, 0x6ecfedf5, 0x6beb7a46, 0x6c3f1351,
-	0x99ff7e6a, 0x2d3f50df, 0x6b665985, 0xc90c563d, 0xba1db494, 0x3b35f71b,
-	0xd625f3dc, 0x89bc4f17, 0x047b31f6, 0x13a5ebe7, 0x4f914a73, 0xfbec0efb,
-	0xd9b3ea05, 0xe2d86091, 0x13d05e7e, 0x8ff72a7e, 0x40b8c02b, 0x0cbbb19f,
-	0x9dfeafe7, 0xec1fe796, 0x718e9b8f, 0xc09cff82, 0x6e2a31f3, 0xfa8492d8,
-	0xf9e57c56, 0xf8c1bfbd, 0x74f4efe6, 0xcd1353df, 0xa94abded, 0xe1397f31,
-	0xcc5ed76f, 0x5e7be95b, 0x15aff74f, 0xe2b39318, 0x2963ac7b, 0x3feaff3e,
-	0x78865eff, 0xee769428, 0x772ff6c5, 0x438445eb, 0x7916c68f, 0x8f61f233,
-	0x0acefc9a, 0x3bd15eb9, 0xdc27ef82, 0x8bf84457, 0xfa8492d9, 0xafc472b6,
-	0xcf7dc0ee, 0x833cb696, 0x567b0f7e, 0x670e774b, 0xc1b8079f, 0xd47bb3b8,
-	0xfb034998, 0x5e90aa30, 0xca5b0bce, 0xf7f9c49e, 0xf5e77ef0, 0xae9e085b,
-	0x5c33d73d, 0xd431fa0f, 0xad85e7c7, 0xf767ed41, 0x7e859b3c, 0xcddfb9e9,
-	0xa154ff26, 0x2a5f8573, 0xf4836b77, 0x58824922, 0x3fca5b8c, 0x02198b93,
-	0x0ee759e2, 0x927be8ee, 0x6b9fc7f9, 0x00357b56, 0x5b2d0aa3, 0x0acdf98b,
-	0xde26543f, 0xabe78c5a, 0xd1d31b14, 0xf5c8a97e, 0x9c5f2195, 0x3c5d33d5,
-	0xd65b7bf4, 0x6bad955b, 0x7c1da0e6, 0x45fcfda5, 0xc95f4796, 0x9b55f87c,
-	0xdf781dde, 0xb5fe5a18, 0xa84f998e, 0xb585f5fc, 0x95e5b25a, 0x78d6def9,
-	0x55afe81c, 0x71f97347, 0x8337fa12, 0xac93fb1c, 0x0aad16ef, 0x04eeffee,
-	0xad594f9e, 0xfea3a5f1, 0x7b7fe653, 0x87db8982, 0xca3a5f2a, 0xb371d0ab,
-	0xbcde5925, 0xa9bc9020, 0xd14e156c, 0xd20824fb, 0x2b3c3f58, 0xe6372e75,
-	0x87870d13, 0x0f197cf8, 0x70f1e612, 0xd66caabe, 0x4f30f4db, 0x022f9855,
-	0xd18725ed, 0x50768117, 0x6b122bdf, 0xa317d192, 0x5fe29fcc, 0x5653894f,
-	0xfd36d478, 0x71c1eb70, 0x865e4fd0, 0x5628037f, 0x537ce44f, 0xeb4e16de,
-	0x1f2f9331, 0x677cb6e9, 0xa73c38f0, 0xfb1f8029, 0x06c576da, 0xf70cebfa,
-	0xa751f74d, 0xfffa6f88, 0x07bd31f9, 0xb5b2295e, 0x4e794f78, 0x4083efe0,
-	0x3907de9d, 0x5677df27, 0x43086d7e, 0x95f739fa, 0x4fb8f883, 0x7b9c91f0,
-	0x7246cdb1, 0x23ed4fac, 0x626bb739, 0xf947af11, 0xbd6e50ca, 0x24a7f138,
-	0x7c12fa3f, 0xd29ef865, 0x2f8ea566, 0xd01d81cc, 0xe490b6d1, 0xe7896cc9,
-	0x6a5db051, 0x71138f13, 0xe1932f78, 0xde86d8c4, 0xd443f23a, 0x3a97b466,
-	0x42f72a27, 0x25f9ff1a, 0x31f53f3f, 0xe456bef3, 0xc50372cf, 0x6abec07d,
-	0xc0ed097e, 0x8c16b105, 0x4dc287a7, 0x898c5fb9, 0xe22966fe, 0x7da31de9,
-	0xbc3cc4ec, 0x9f91f4cf, 0xf64ed401, 0x5a6bf57c, 0xd5fb37f2, 0x7e517b03,
-	0x71f68db9, 0x0e9e0113, 0x547af74d, 0xbed41771, 0x67ed342e, 0x1c91bd21,
-	0x97d6f4e1, 0x07bf8bb9, 0x4e4fdf22, 0xfa00f192, 0x7d22358c, 0x87cf1c08,
-	0x409ff6db, 0x9dd7d379, 0x943a724a, 0x3db6ce9f, 0xe3728116, 0xaeefd043,
-	0x87c07880, 0x7ca59f8b, 0x0798f980, 0x6b3de502, 0xf837cf83, 0x2fc98fed,
-	0xda039b64, 0x821b1e91, 0x4170a1eb, 0xf106f4ba, 0x7df68b81, 0xc01bf23f,
-	0x777a6aa7, 0xa861c235, 0x52ea173e, 0x4850fd40, 0x2b3fa43d, 0xfdc3f6e1,
-	0xebcd1813, 0x25eded18, 0xcf1f7e3f, 0xbd07adef, 0xe103f546, 0xee2d3f74,
-	0xc315bd03, 0x8bea16f5, 0x8a6e88aa, 0xd01df55f, 0x83cabdd2, 0xe1259fed,
-	0x291e81f9, 0xfed5534e, 0xf7fa2c72, 0x699826eb, 0xb18fd07e, 0xa0731794,
-	0x11fd163d, 0x7a21dda5, 0x0cf7e5d2, 0x287e50b2, 0x9bc94eed, 0x42e5794e,
-	0x5f3e1677, 0x8719cb27, 0xeb097508, 0x10e1ce8c, 0x76b3df38, 0x287ce489,
-	0xf4c956de, 0x8b21f20a, 0xe15e39f2, 0x1e4503f1, 0xe572c854, 0x7267b610,
-	0xf72937fe, 0x84cf7852, 0x9c8c3f7c, 0x23815af8, 0xcef8a5ab, 0xbccd13fd,
-	0x79a78f2e, 0xe789fc79, 0x3e7abded, 0xc713252b, 0x45f79599, 0xd528f2fd,
-	0x0e505f2f, 0x781c93c4, 0xe70b1d50, 0xb0467caa, 0x8a90c3d4, 0xd04535d2,
-	0x2d532d9d, 0x1ab8a22f, 0x2e1ae7e6, 0x1d2857df, 0xf8e44e45, 0x1fb914ad,
-	0xa057b95e, 0x6a73a5fb, 0xf2076f7e, 0x580fde86, 0x08a6b056, 0x18beeff9,
-	0x5fd026a7, 0x4bfcd6be, 0xcbeb821b, 0xc514d76a, 0x95e7c30d, 0x8d76b6ab,
-	0x57cf9764, 0x8a2c6f61, 0xaede5f35, 0x5e9cfbec, 0xf574e7d9, 0xcc7840c8,
-	0x1234535f, 0x7fba65ca, 0xdcfc1e17, 0x5eb5dae7, 0x5d2d57ca, 0xb7c4f743,
-	0x8a0daa5c, 0xbe6b5eb3, 0x7ba6e60a, 0x3fed2b90, 0xde0874b4, 0x312b8c5e,
-	0xc43dafe0, 0x0137c067, 0xf4cbc5eb, 0x289f143a, 0xfd063c5f, 0x3c5f6653,
-	0x113e3026, 0x339be25a, 0xb88ae522, 0x2c3e04a8, 0x0f030cb3, 0x89d1ffa5,
-	0x3f1ace3c, 0xa8f1d391, 0x5e3b55d9, 0xe9d71462, 0xa57bf941, 0x22fe4cf7,
-	0xbf07efef, 0x9c233267, 0x9bd4ebf7, 0xdfd3fe30, 0x87c50df9, 0xe619d7fb,
-	0x03077bf3, 0x5de7804b, 0x029be3f1, 0x26abc0e3, 0xdc243b71, 0x9a9dedca,
-	0xe3d5f50c, 0xa1c6994b, 0x1bd912f8, 0xdf74e199, 0x05f6d7d2, 0x8efeb7e9,
-	0x8bde133c, 0x0dbb75f4, 0xff356fc8, 0xa8b17ffc, 0x3e3afb87, 0xbeb4bca5,
-	0x7ca33f6f, 0xde728db5, 0x3936a1e0, 0x6cdbabdf, 0xe2fef6c4, 0xbf6117bf,
-	0x8fe9724d, 0x98f8f02f, 0x83f12a52, 0x3bf9ff00, 0x4c7b53d4, 0x54c51f1b,
-	0x2db0ca99, 0x7fc0bf24, 0xe1bd468e, 0xe3982b8f, 0x04c38b86, 0x54d215c6,
-	0x2580ae3c, 0xd2d215c6, 0xeb015c78, 0x12c05718, 0x8ed80ae3, 0x63ac0571,
-	0x18eb015c, 0xc63ac057, 0xb8c4b015, 0x297fb602, 0x0fd1e7bf, 0x3dc78b82,
-	0x57f7240d, 0xc0337e62, 0xbf27656f, 0x47b95abf, 0x7c617ba2, 0xdff503cf,
-	0xad3b7965, 0x678ede72, 0xd607dd2b, 0x882c901c, 0xc41f7c22, 0x3bf98e95,
-	0x1e314703, 0x5822d354, 0x7db198d6, 0x6363ed3e, 0xa507de47, 0x6d47bed8,
-	0x4f44cd11, 0x828d9f1c, 0xd57c8f5b, 0x57e287b1, 0x949d7105, 0x2cd35fef,
-	0xcebb8c30, 0xd93f72d3, 0x0e6b4129, 0x1d92abdd, 0x9376d4ed, 0x9cf552ff,
-	0xef7c0e60, 0x45e266bb, 0x7dca1392, 0x88fe52f5, 0xf37a3d39, 0x6b3d2092,
-	0xf85779e3, 0x29c7ec27, 0x1d9377e7, 0x2d176012, 0x6c6c7bc5, 0xf7a5be97,
-	0xe0e09c4d, 0x9dae108e, 0xd1d95577, 0xb5f31eb2, 0x55fe687e, 0xdef924e1,
-	0x47bf9b3a, 0x92f8fc52, 0xbd60077d, 0xb25a2dc1, 0x609f6e53, 0x1e526dbf,
-	0x28d819e6, 0x53b472ee, 0x27d67e4f, 0x8a0faf5b, 0xd74a14bb, 0x8563dc51,
-	0x7dfd205a, 0x3b9f6ac4, 0x4672e809, 0x6f14bdf1, 0x246f1199, 0xf0e8563e,
-	0x4fc96b49, 0xe315de70, 0x0a9877f9, 0x34e7ecb5, 0xa5cf9c9f, 0x5eb0a9e0,
-	0x2cf7e370, 0xbd0b3316, 0xc008b03f, 0xe5517187, 0x188b1ffb, 0xe850afcf,
-	0x8156c56a, 0xbcbe8ae8, 0x84bdf010, 0x103df845, 0x6af77fd0, 0x289bfdb9,
-	0xc4f27bf2, 0xe28f3c4d, 0xfca7663e, 0x7d486591, 0xd7d7e912, 0x0f6ed07c,
-	0xdb892ebf, 0x9c38e6f7, 0x3571f17f, 0xc61707e5, 0x276e9edd, 0xf9405f3d,
-	0x6ef78213, 0xaf1bfbe9, 0xf3833f26, 0xb9aa8e27, 0x927801dc, 0xf485d59f,
-	0x3b1ef14a, 0xcaebc795, 0xbf229ca9, 0x5efa161f, 0xcbe77f43, 0xb0be382d,
-	0xf84160c6, 0xc03df15f, 0xffbfabb0, 0xebf394e6, 0x5c9ec512, 0x6be3c233,
-	0x51e10583, 0xef49d718, 0xf3caa589, 0xb25b9c3f, 0x8b69f109, 0x1f5c2e60,
-	0x00b669ef, 0x40f08b7c, 0x3dd1c602, 0x66cf7c36, 0x513053a0, 0x7265f53e,
-	0xcc3aeb74, 0x1349a953, 0x2daf184c, 0x1852db0a, 0xa517f30b, 0x7677d324,
-	0x1c78da6a, 0x4e4a0fb6, 0x92dc5307, 0x62aac7c0, 0xf1cf7e31, 0x3fb5cbe8,
-	0xdfcf293d, 0xb3e65b3e, 0x782f8efe, 0xe3b5f11e, 0xfbe9bbb4, 0xef4f4c1c,
-	0xf60fd3af, 0xd1c6fb35, 0xe855af14, 0xae39b068, 0x45a8e909, 0xa5a513d6,
-	0x8ed1a9ef, 0x37b3cc68, 0x96ca1c23, 0x4b175c5c, 0x4e3e1ce7, 0x87dfe4a6,
-	0xe502c9c6, 0xde46ffed, 0x5aba89fd, 0x5baddf2a, 0x9d776545, 0xe8079e8b,
-	0xbf08238b, 0x7d6f101f, 0xf130d27b, 0x4733a656, 0xbe05be92, 0x90edf1e7,
-	0xbbf02af8, 0x33efc018, 0xd9eea23a, 0x8348f680, 0xcdf782c6, 0xd2bcff98,
-	0xfde1f240, 0x59c6c349, 0x2819f815, 0xf4c83b2e, 0xe9878839, 0x112aa919,
-	0x926dff9e, 0x44e71410, 0x2273c1be, 0x7c8960df, 0xf9f952a3, 0xa30d69e6,
-	0x7da194ef, 0x40fb22e0, 0xbf5df84f, 0xd40ae406, 0x20a665ef, 0x442172b9,
-	0xf32380ae, 0xac5f7a33, 0x0936cb43, 0xe9cffcfe, 0x19ca5c50, 0xb878ce46,
-	0xe61d199c, 0xb3be9e79, 0xf9461d50, 0x44efc0c5, 0xf2374767, 0xac25bdbc,
-	0x461dd684, 0x3e7bd0de, 0x38188ef7, 0xbff414f9, 0xd90361f7, 0x9613eb39,
-	0xe477ffe6, 0x71279fcd, 0xdf813c78, 0xed5d5073, 0x059b0e7b, 0xb15d8fbc,
-	0xbe236590, 0xc439ef95, 0x7bf218c1, 0x39eff5ff, 0x123c988c, 0x0ae0e7bf,
-	0xdc439efa, 0x30e7be15, 0x6171b26a, 0x461cf7e0, 0x30b11e4d, 0xc60e7bf8,
-	0xb29df885, 0x39efc1ff, 0xbbce4fa4, 0x370e7bfc, 0xa0ff364e, 0x3d8039ef,
-	0x4fe3899b, 0x63c6d8e4, 0x3b9f2899, 0xe3e5fdf4, 0x97643df2, 0xb2c52f68,
-	0xa2a5c228, 0xc56dd176, 0x73d16df2, 0x5f03b63f, 0x1578444c, 0x037d963d,
-	0x5125977e, 0xf2bca1eb, 0x49b6ad27, 0xb96bff38, 0x3cf8c9b6, 0x2f5fde34,
-	0x73f60f9f, 0xcd0bf60b, 0xe2e8531f, 0x0e5cc9ae, 0xa9cb93cd, 0xc7bfc3f5,
-	0xbf326f3f, 0xbed6be4f, 0xe077bf61, 0xd9feca7a, 0xdc56c596, 0x4ef7ec0f,
-	0xb7ec27dc, 0x88664b04, 0xf80f7a0e, 0xc9757a72, 0x2e7462fb, 0x3fb38f90,
-	0x9528f6e1, 0x14772ae9, 0x1ea30dda, 0x7ee14770, 0xe80e3547, 0xdf907df1,
-	0x68f406ba, 0xf576fc3f, 0x7fdb1e80, 0xdaf9e36b, 0x9f6ff3a1, 0xf491fdcc,
-	0x7e3403a9, 0x4dddfc0c, 0x1440c1fe, 0xe5e96dda, 0x14ae3447, 0xf66d4f7a,
-	0x93764127, 0x8c7bf899, 0x01e636dc, 0x8c3d2191, 0x1e78c1d9, 0xe90c4163,
-	0xef1d4ab9, 0xfdc0f95a, 0x38d1d222, 0x803bec37, 0xaedfaefe, 0xaf7e0c1a,
-	0xaae34bd7, 0x5ec025e4, 0x64ee7a0b, 0x9474bf3c, 0x5ed08f2c, 0x39d9efc4,
-	0x77d08fcb, 0x0b8ec0a6, 0x79be8f99, 0x594f9430, 0xe6bfb3ad, 0x62be5333,
-	0x77a5bf50, 0xfa3d66ff, 0x5ba5e5b5, 0x2f17e435, 0xa58f5969, 0x269ef1c3,
-	0x197d918e, 0xcbec1fd4, 0xfb65faa0, 0xf547d90c, 0xc7d717fd, 0xd02eb30d,
-	0x13a456c1, 0xaa8e0e85, 0x4fd0e33d, 0xb30cea3d, 0x3c1df7f0, 0x269a5df4,
-	0x5df4bdf9, 0xcadd39ff, 0x5d3965f3, 0x3f1df8c0, 0xa9ea8e8c, 0xaf1df2bf,
-	0x1c8a956b, 0x8dcefa1c, 0x5e28b986, 0x7248cb39, 0xfff646ae, 0xc89897aa,
-	0xbaf8511e, 0xb539e55a, 0x18c5fb1e, 0x8a9bfe79, 0x7aabf7d1, 0xcf9451c4,
-	0xcfac3f4d, 0xacfba54a, 0x178f7ad8, 0x5db81de7, 0x15b9efa0, 0x5ab97384,
-	0x9e389628, 0x4447e785, 0xa7815dfe, 0x98487e51, 0x37bfc147, 0xbf972530,
-	0xf8cf103f, 0xca98db77, 0x369df21c, 0xed7a1e39, 0xeff1b4ef, 0xf7e7cd92,
-	0x25510d72, 0xf9f1cba5, 0xf9e81b82, 0x1f52efc1, 0x2afee2b1, 0x71b4ef94,
-	0x4e61bf7b, 0x557f3d06, 0x3d41af30, 0x5d807ae1, 0x7a6d3be9, 0xef80fbe4,
-	0xf887bdb3, 0xd9f7d6ba, 0x1c0fef94, 0x23c3705d, 0xbd1c397b, 0x3355ef78,
-	0xafe418cb, 0x3c3117ff, 0x56c0d29e, 0x000056c0
-};
-
-static const u32 tsem_int_table_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x51fbff00, 0x03f0c0cf, 0x3370278a, 0x45e39c30,
-	0x8381e9f0, 0x5fd32918, 0x50c0cec6, 0x4055c401, 0x3f880bbc, 0x7c3032b1,
-	0xff5e2566, 0xdb042935, 0x21818248, 0x88d7881e, 0x49a83031, 0xa41dc422,
-	0x03261819, 0xb150a1f9, 0x5f3a4047, 0x0f77328a, 0x80a69c16, 0x872ae629,
-	0x9163a760, 0x6819c647, 0x50e54bf2, 0xf40499f9, 0xa2be340f, 0xa2ffca8e,
-	0xa013a10a, 0xe4d157e2, 0x3be542bf, 0xa6bafea0, 0x4edcdd8e, 0xc35dfd32,
-	0xfc01a102, 0x9847b099, 0x009847b0
-};
-
-static const u32 tsem_pram_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x7dedff00, 0xd554780b, 0x733ef0b5, 0x7993331e,
-	0x31e424e4, 0x1e4e1081, 0x03086820, 0xb78a8884, 0xf6301027, 0xd57876d2,
-	0xaf0e2d58, 0x6b86f210, 0x7fb6bd2d, 0x78490806, 0x111fc1a8, 0x29e1d5ad,
-	0x311d82f6, 0x0388b622, 0xbdabd228, 0x557c5837, 0x0bd11feb, 0x2a44908a,
-	0xe5b5ef6a, 0x3ef6b5ee, 0x09939cc9, 0xafdb7b04, 0x7cfdffff, 0xc7ecee9f,
-	0xf5ed7bd9, 0xfdad6bda, 0x8131c918, 0xe4230da4, 0x06fbfc22, 0x109d9221,
-	0x9d37a132, 0xd72120e3, 0x66924218, 0x92ddfd2f, 0xbadc4214, 0xa349bfe2,
-	0xe4febba9, 0x5f5f9a1a, 0xa4aff0ec, 0x4d1f5b4d, 0x2d096a78, 0x2fa1efbf,
-	0x7cd04fc3, 0xad79ecfa, 0xce7eb4c5, 0x5d0fc924, 0x10ab1a1d, 0xd8e7ed02,
-	0x520176c2, 0x9097e581, 0x927fa130, 0x45f8e8af, 0x9fe8b884, 0x37fe9724,
-	0xa5b21c89, 0xd1e43e60, 0x99029ea0, 0x31364846, 0x7e6055fe, 0xf509fc36,
-	0xd0677744, 0x779e75ef, 0x7fec13e5, 0xdb0a5f8e, 0xf27347e9, 0x4dc87203,
-	0x6d08c6d3, 0xfb1dc749, 0xf908395d, 0xe4990cc0, 0xd8b68763, 0x0fca6ffe,
-	0xd214754c, 0x080b67fe, 0x49d9f9ff, 0xcc82da36, 0x3be1eda6, 0x1a1f4e22,
-	0xd99f67cc, 0xe0dfb8e8, 0x40dfdddf, 0x5fc0a7ff, 0xe5a1094b, 0x9e0c1ccb,
-	0xc5d9d9e4, 0x1989ce30, 0xbf4316d7, 0x3213a673, 0x9d4d5688, 0x4490f63d,
-	0x891aebf3, 0xcddb4edf, 0xcf1c0d29, 0xcbf8d981, 0xe80293a7, 0x60ee8e97,
-	0xffc45f7d, 0x64ef38eb, 0xcc3fde3e, 0xfa102b1e, 0x8a97f641, 0xa0725da9,
-	0x4bd153f9, 0x2d056a48, 0xee53191f, 0xd09a769f, 0xe6e9e4f2, 0x721340f6,
-	0xc425211d, 0x1aea7293, 0xc91677fa, 0xad4228ba, 0xee8c0b6a, 0x4a6b0fe5,
-	0x22f9fdff, 0x12fa01d0, 0x6a1fd6fb, 0xa0e9e99c, 0x7b375af8, 0xf4d08796,
-	0x0f2cc0f5, 0xd9f5efe0, 0xd68f10b3, 0x676673f6, 0xfb5e0227, 0x06feef1b,
-	0xfa08d03a, 0xb5b3c73d, 0xea48907e, 0x39fbf423, 0x31c3d13a, 0x9301dffd,
-	0x0964254d, 0xb34d1b30, 0xd2a6d525, 0xe88d6cfa, 0x95e33891, 0x3b69b102,
-	0x28994992, 0x0ff352e3, 0x2637bb61, 0x71c34ad9, 0xef0773e6, 0xb81a55c7,
-	0x6fa50e67, 0x751274d6, 0x2912ba51, 0x75e2c6aa, 0x1a548a5d, 0xddc7038e,
-	0x68425e1c, 0xe1c0cf7b, 0x02d86571, 0x47329fd0, 0xf5c2c40c, 0x42678003,
-	0x4ca24a6f, 0x18f8e6ee, 0xfbbf72fd, 0x338f506c, 0x8e00bb8f, 0xecaa9009,
-	0x0c8f0e3b, 0xb201937c, 0x43fc8296, 0xe02463c2, 0xb91eccfb, 0xe5070124,
-	0x17f0a18f, 0xa42dae15, 0x1412d47b, 0x47ec56b2, 0x0324a4f4, 0xde1157bd,
-	0x4f51290f, 0x42157e51, 0xd78b84ab, 0x129e6a5c, 0x35f06539, 0x193ba9f0,
-	0x5e1cbfc7, 0xe518a048, 0x88d43152, 0xe307c078, 0xed4df92b, 0xbacba502,
-	0x947ee5d1, 0x90218a6f, 0xe17e4333, 0x3bf457df, 0xbdccff37, 0xca91d29c,
-	0xd3396b91, 0x2cdf8a8f, 0x8e92eb67, 0xc82008b5, 0x0f49b964, 0x40241210,
-	0xeb6f0377, 0xbc78a2be, 0xfb5bbf04, 0xe7c86fdd, 0xc9983260, 0x053f9327,
-	0x79bd07fa, 0xf0077ed3, 0x5edf3af5, 0x5d6bcc07, 0x7a825efe, 0xe8c7d38a,
-	0x5daf95d7, 0x81d6ce52, 0xee808d7c, 0x9ea748c3, 0xc6a7d1f2, 0xa6767e02,
-	0x748bf72a, 0x08933b7e, 0x6b75d9ea, 0xd02b7848, 0xb5e594b5, 0xb5e1696f,
-	0x9d3b8e74, 0xd698bebc, 0xed06bcd3, 0x3adbbea9, 0x68870b49, 0x8d8b6b7e,
-	0x85ab1fb5, 0x311f9a45, 0x8a148491, 0xc2c56d4f, 0xbe5a4e95, 0x17eaa375,
-	0x34fd5eb5, 0x2d6725a2, 0xdeb2dfb4, 0xbdf00aa6, 0x3b23ad8f, 0x443849f3,
-	0x39b1dfc7, 0x69239bf9, 0xf9b2143e, 0xf24fd387, 0xd945faf8, 0x022844a5,
-	0x9c3a31b4, 0xae5c7921, 0xa9e50204, 0x7ecb7cbc, 0xa48ebfff, 0x5d363df0,
-	0x45a0aff2, 0x4ccfd63b, 0x769e28d0, 0x3f048168, 0xc0f07f4d, 0xccefcc7c,
-	0xdd00260c, 0x9f9c6e76, 0xc0f14c00, 0x461b99e6, 0xd2617b41, 0x6ce91d61,
-	0x1f47ffd6, 0x00ec3a28, 0x9e994b38, 0x7e0d6a4f, 0xbcf9a253, 0x89b91249,
-	0xadcf214e, 0x1fdbdc21, 0x4f5811b2, 0x8b6de8fb, 0xcdd44ebe, 0xb4eb5779,
-	0x5d7f818f, 0x2009160f, 0x86353bda, 0x923741e7, 0xbeec8af0, 0xc85cefe3,
-	0x5d2913ea, 0xbf2e0e80, 0x96675962, 0x4756f85a, 0x3c717079, 0x1c755ab9,
-	0x897a488f, 0x578bd690, 0x62469ffa, 0xf07ae9f0, 0xe9f58128, 0x8163e78a,
-	0x7ca05d27, 0x9cab830f, 0x1c1eb9ef, 0x6357caf7, 0x21b1f1e3, 0x7fa01eef,
-	0x6177c522, 0x50eb0424, 0x0a24617a, 0x57c9e2fc, 0x9a0bb034, 0xc5c93109,
-	0x7cfbd1a1, 0x1337201d, 0xaf583e22, 0x837e8dd7, 0x81568fc9, 0x6fe630f8,
-	0xb7e4f7b4, 0xc1fb5893, 0xf87287a8, 0x697853ce, 0xcb87bb39, 0x847f4f59,
-	0x732447ad, 0x4f75c21c, 0x5e7561e1, 0xc84c7d1c, 0x97cb940a, 0x817ae049,
-	0xedcddea6, 0x6c06a751, 0x7900dfae, 0x910240b7, 0x134ddf38, 0x42d27ad8,
-	0xe9a05d74, 0x162f44a3, 0x664b9d70, 0x2eb2d7fa, 0xbc9fd1f5, 0x16e9165d,
-	0xd468df40, 0x8734803e, 0x23cd31f8, 0x92474c01, 0x26af4c56, 0x49f34c11,
-	0xa405a63b, 0xaf43531b, 0x422a89f8, 0xfac4c47e, 0xa4e720c9, 0xe58b63da,
-	0x3264d0bb, 0x3cce3eb2, 0x73782d9a, 0xf8ebf890, 0xe75f021d, 0xfc8aa648,
-	0xf17af843, 0xe818b06e, 0xfc2854c5, 0xefccdbbb, 0x0ebe24e2, 0x693dea38,
-	0xdd335780, 0xcd54548d, 0xf06d5a7c, 0x1c2444a9, 0xc41f32c7, 0xd6b8cc63,
-	0xfb7356fe, 0x9c9f98c6, 0x491f23a2, 0x50cf666e, 0x71bdf438, 0x0828d1f0,
-	0xab419e7c, 0x29b23adc, 0xb6494bbf, 0x6b9a5ac8, 0xe8764f74, 0x893f2f38,
-	0x7ceb6747, 0xbe2af0ac, 0xa9b3c181, 0xcb0a9e07, 0xc297fa3a, 0xfea64ff3,
-	0x1db24ca4, 0x86a20bd6, 0xbc56de70, 0x42def9f6, 0xd2e4fe8f, 0x57d66991,
-	0x02d78a4a, 0x069f8587, 0xe37c7f68, 0xe47fea4b, 0x211bfac3, 0xa9ec2a41,
-	0xe60101f9, 0x1a40ad7f, 0xc85e2913, 0xa0eda268, 0x6af5cd70, 0x698b8ecc,
-	0x91f41937, 0x74c90b66, 0xee92cfbe, 0xe43ed023, 0xf41d9127, 0x6df367b3,
-	0x7d695ba5, 0x63b69faa, 0x1e4005fd, 0x0b6d1dae, 0x9fd1b940, 0xf5329e4e,
-	0x112efd47, 0xe836e1f0, 0xe4c3f163, 0x1fb436b1, 0x6fa27c95, 0xc75f2389,
-	0x1d157cb9, 0x9eb0ea71, 0xb094cab8, 0x8ffa1b33, 0xb53e4314, 0x5d61f89a,
-	0xe6cdd49f, 0x30e1c651, 0x59fa9de6, 0x6a7e0040, 0xc03b31f7, 0x3fd04855,
-	0x74da3254, 0xb4dd1ff0, 0x7e42f50e, 0x50531754, 0xd83fa23f, 0x5f3d9e1f,
-	0xd00bed3d, 0xb9d47d7e, 0x92be076a, 0x9fa0e9fc, 0xc8568f57, 0xf8bdfa60,
-	0xfff63b3b, 0x1862a7b9, 0x47cf9989, 0x0bb1d10d, 0xa670c1a9, 0x67a618e1,
-	0xed31da1b, 0xd30b786c, 0x594ae9fe, 0xebceda8e, 0xc0d7e27e, 0x3f0f101e,
-	0xc00f3447, 0x5c75d51d, 0x12a21c17, 0x82802eb3, 0xd36fff06, 0xdaf0bcd8,
-	0x086bc46c, 0x67d54de6, 0xe0367878, 0x9e000a5b, 0xc2223887, 0x77867cd2,
-	0x01d03fc0, 0x3c8e8bca, 0x5cf102b7, 0x9e02c64d, 0x0ca4c937, 0x13e03cf4,
-	0x827d89d6, 0x03800eed, 0xfe69f3f2, 0xc1fa8ffa, 0xf78659fb, 0x9e29978c,
-	0x4b494e00, 0x8eadc664, 0x913b95f2, 0x27d7120b, 0xf9927abd, 0xbdf6bdd9,
-	0xcf00eff6, 0xac894696, 0x68a6bc85, 0xf7b7114a, 0x15824a41, 0xdcdfc1d3,
-	0x28fd3e56, 0xe2b90bd8, 0x5a648757, 0x3a5eb43e, 0x4f2311d9, 0xfd746559,
-	0xb0c276a4, 0xecf2e6e5, 0x074f3990, 0xb7347f40, 0xc43e5cc5, 0x87aef5c6,
-	0xad1e4078, 0xe8b65af3, 0xd3fd7157, 0xea240d55, 0x02f26396, 0x1791a7c3,
-	0x423b13bc, 0x46cb7e74, 0x4c038c11, 0xb3f5b1b7, 0x7ca3be15, 0xd74f2f71,
-	0x5231fa5b, 0x46dba269, 0x193d30c6, 0xddba7d6f, 0x46ce3c56, 0x4db06bfb,
-	0x72a3671e, 0x042292e4, 0x5b9777ec, 0x93f9e3d1, 0x8e126dd3, 0xebb5209f,
-	0xfbab8522, 0x4adfe23a, 0xee4cbef1, 0x2c7c828e, 0x21fcd62b, 0x30fe4750,
-	0xd51263ca, 0x15f66261, 0x700253c1, 0x6c4a7850, 0xfb044e38, 0x0738a6e9,
-	0xcc997dfb, 0x4a365dfa, 0xf6376823, 0x3655e703, 0xd80ce119, 0x34fd0904,
-	0x1555974e, 0xa34df739, 0x9f554ed9, 0x2667fd05, 0x78c16705, 0x7e6fb946,
-	0x1963fa29, 0x2bf4ccc3, 0x0167d477, 0x2206547f, 0x4e7f80d3, 0x926c5f7b,
-	0x36b7bce9, 0xf144bf10, 0x702b9eff, 0x7357f41b, 0xb008fd7b, 0x5e06df7f,
-	0x3b2a0098, 0xa5ac7a80, 0xa25fa564, 0x148972e5, 0xca3f2995, 0x25bf0f13,
-	0x2a1a4017, 0x938b3886, 0x477d33d4, 0x35224bf5, 0xf5231cbd, 0xa27e218f,
-	0x72d03c80, 0x60256f55, 0xdba8380f, 0xef863270, 0x1e734c94, 0x7cd8fa6c,
-	0x72e37a7f, 0x27e79829, 0x09fe0387, 0x49dde9da, 0x26927fcc, 0xde000bfa,
-	0xa6ffaf7b, 0xc4fcf006, 0x67f93366, 0x5a4d7f56, 0x79696ffe, 0xfee26810,
-	0xd5fcb4b6, 0x80f1bcb4, 0x979c5697, 0x9432ca63, 0x24f0050b, 0xbf07f932,
-	0xe41d67be, 0xcf5bf878, 0x572f58db, 0xf835bc37, 0xa720e1c3, 0xa43f831d,
-	0x052d59c4, 0x3e42ff91, 0x1c28b5f0, 0x098f9992, 0x62134f78, 0x18176e52,
-	0x5a9c9bf6, 0xdc947488, 0x988ea9d2, 0x8fc0ddf5, 0xc1ddfcb2, 0xf4878e1f,
-	0x78ad4c6d, 0x0120a455, 0xd768d03f, 0xe018b713, 0xe234effa, 0x1fc479a9,
-	0xa47338a5, 0x7a6a78b0, 0xf30a285e, 0x09fd5272, 0x233dd3eb, 0xf0c56b5f,
-	0x3b0fc581, 0x3f20ad94, 0x61b68cb4, 0x7865b35c, 0xf90290e4, 0xd1406a0c,
-	0x5dca677a, 0x4c6d8821, 0xe37c63cd, 0xd4f5b3f4, 0x7e8c3c35, 0xbdbfa198,
-	0xad5e1f1c, 0x67b3f51c, 0x31ded9a2, 0x2b2701d6, 0xdb36f4a2, 0xa694ce51,
-	0xbe82c54f, 0x9b539a7e, 0x69e51a76, 0x233fb9a4, 0xe36ed1de, 0xc96b8bf1,
-	0x593768b5, 0xe1fd12e2, 0x71f86bcd, 0xdcbcd913, 0xfc1849d3, 0x5189f4e6,
-	0xcfd79bc4, 0x9bd866f0, 0x9bbf3e1e, 0xfc04234a, 0xf3f89ebe, 0xeb6f0ccd,
-	0x7fa28baf, 0x29ec7eb7, 0x85bd67b4, 0xce3f261d, 0xa1ca1ef8, 0x76c4fcfe,
-	0x18f6a1a8, 0x23711bcb, 0x19e9a78a, 0x61ebbd69, 0xaddbb72b, 0x92275374,
-	0x4763d062, 0x8315a747, 0x84b7bede, 0x3cab4ec2, 0x6297587a, 0x7ef2adf0,
-	0xdf867cd4, 0x7cd8cb7b, 0xd3f47b69, 0x93989def, 0xf266e304, 0x7f11b0f8,
-	0xebcbf1ee, 0x284f78cd, 0x2d85c4b4, 0x67eab77e, 0xcc4b52f4, 0x5f39abe5,
-	0x57a7222b, 0xe8ce192a, 0x4f3e3035, 0x84bcf832, 0xdf3279f1, 0xd12f4837,
-	0x921d010e, 0x4dff994a, 0x4df37e2c, 0x5e8c1d29, 0x00c88f37, 0xa9fefc3f,
-	0x97663edd, 0x7126ba30, 0xc6efbc7e, 0x71c80211, 0x40268972, 0xc33e727d,
-	0x13c53253, 0xa5c977ac, 0x4ef6efcc, 0x525db0d4, 0x0b5ba309, 0x5fe14c7c,
-	0x898a7403, 0x5b4b3b1f, 0x6b7fa075, 0x741d4ef1, 0xe1c53259, 0xd4cf0a20,
-	0xd81b0a52, 0x805fb49d, 0xc51853d7, 0x49525ab8, 0xfca5d870, 0x82a2427a,
-	0x10f887cd, 0xe94b686c, 0x7e58253c, 0x20b26268, 0xa7ef7ed0, 0x80f1c07c,
-	0x8f173c71, 0x785fdfa3, 0xfddcf512, 0xc8364df0, 0x1cebf6a9, 0x36a5279a,
-	0xf707f83f, 0xf108e697, 0xbcc6e7e2, 0x2acb83fb, 0x35f812c7, 0x9572fc31,
-	0x16dee3c8, 0x22475dfe, 0x57c82e6a, 0xa5f76f48, 0x830feaf5, 0x65e47aff,
-	0xfecbe312, 0x87a189f4, 0xb21824dd, 0x1fd5f765, 0xdef8ce92, 0x7940179e,
-	0x24ef03eb, 0x8a52afc6, 0x9136fcb9, 0x5e867fdb, 0x140792d1, 0x00a12727,
-	0xd72277ae, 0x02da4f4f, 0xf054c50b, 0x4eb8c3bb, 0xae74c8b8, 0xca9f1937,
-	0xe6a6ff9c, 0x4ae2bd33, 0x9776b089, 0x903aa78d, 0xa834d6df, 0xc65a1fa8,
-	0x439ed5de, 0x7866b0f1, 0x73be1f93, 0xb9196b8c, 0x3cdbf68d, 0x2b70797c,
-	0x30fdc00c, 0xac22bfd4, 0x8d5f8c83, 0x0e03307d, 0x61d21992, 0x7e09cc9f,
-	0x2467e011, 0x24905fdb, 0xeb8fb512, 0x4795df1d, 0x6967cde1, 0x0dc19f28,
-	0xb6ebc9fe, 0x6f9c2ae0, 0xa2946b7e, 0xc99bce9b, 0x42216acb, 0xebcc225c,
-	0xb21e7c72, 0x9f8ebe31, 0x025df7f6, 0xe1c4d3ec, 0xdb22dddf, 0x472d59a7,
-	0x7e085088, 0xf289ed1b, 0x6a6ceac9, 0xa381c797, 0xd56bf391, 0xc3f8672e,
-	0x89ab7e18, 0x75f29924, 0x1fc233fb, 0x7711fac6, 0x514fb80a, 0x4358d1cd,
-	0xcf00b23a, 0xf61a29ef, 0x48eb6b57, 0xe9177c83, 0x78025b4e, 0x8b8f0310,
-	0x5277fd74, 0x90b8c4be, 0xd6eb607b, 0x81a7f0e5, 0x4085d10c, 0x0fa9e4cb,
-	0x178e9879, 0x69e307dc, 0xd2bf2b2a, 0xf5f0e371, 0x4d7cb10b, 0x6a5957c4,
-	0x147f6be5, 0x129ddaf9, 0x9fb77ac5, 0x8fc1b5f1, 0xad1f9c89, 0xbf8c687c,
-	0xd6afc79e, 0x335f3e72, 0x708549a1, 0x9b51dadf, 0x2ce69e30, 0x7c015cda,
-	0x25aa32de, 0x64de7c0c, 0x17df35f0, 0xdb2efea1, 0xa35ad31f, 0x72264eb0,
-	0xeed456be, 0xeb7b9006, 0x38935d7c, 0xbe0534bc, 0x5f39b806, 0x93f807bf,
-	0xae08ddfd, 0x076bd7c1, 0x45bad7cc, 0xfed39b6f, 0xc2d927fc, 0xf1891ed7,
-	0xd7c067e7, 0xb30a4f00, 0x963edc63, 0xdfea7eca, 0x06e7e9c7, 0x6b99f989,
-	0xe5ac1cb9, 0x1fb6b072, 0x223ff839, 0x9afe03f3, 0xc98b3072, 0xe5a24381,
-	0x8cae9389, 0xd3b0251f, 0x9e7bc8e3, 0xe1b5fc24, 0xbc4334de, 0x27fe3c72,
-	0xbe84cd30, 0xcfd234f4, 0xe4c0e744, 0x73c98f3b, 0x76be727f, 0xfe387c68,
-	0xa7f46453, 0x26922ef8, 0xffbe395c, 0x7215705a, 0x43f0367e, 0xb728c582,
-	0x3a667a31, 0x86a92bc0, 0xd304799e, 0x28ad79a9, 0x81be86a7, 0x2bfa0a58,
-	0x3bc62b6a, 0x68ad999c, 0x98f3399f, 0x24fc31be, 0xb88d7ceb, 0x33d71378,
-	0x02217949, 0x853d9feb, 0x9eaa3f70, 0xcc9951f9, 0xd5e2301f, 0x18a8fd86,
-	0xbbd0d47e, 0x79a79f70, 0x97da3d78, 0x3bd637cd, 0x36c3ede2, 0xf077eefb,
-	0x3ed35f4d, 0x0e5a1aeb, 0xbbc9aefd, 0xc3b3c49f, 0xfb18798c, 0x6e3e4e46,
-	0xa8b51e73, 0x32df5c60, 0xc76adefc, 0xfeb26734, 0x7ae7be7a, 0xbbd1ee57,
-	0x54768f2c, 0x6f9f8c6e, 0x03e0c7e9, 0xa343e885, 0xe4183710, 0x4ce7091e,
-	0x3f04849a, 0x924dc7d8, 0x90729d20, 0x5aa97b1e, 0xff401689, 0x9cbc6627,
-	0x3db2f685, 0xbce406b8, 0x0380abe9, 0x53aba9e2, 0x96c6f35e, 0xe6f19d9f,
-	0xa56cc1b7, 0x7ee2d5df, 0xb148838e, 0xdc2763fb, 0x4b7ed1db, 0xe9c737c8,
-	0x09ae149c, 0xcc13c402, 0xbf8f0ae5, 0x72e69928, 0xa45fc799, 0xe7394b14,
-	0xbe34b90f, 0xeb93795e, 0x7602df15, 0x1cc4e74e, 0x713bd716, 0x30674f2b,
-	0xdbc73efe, 0xc234f375, 0x535feef5, 0xf6e5251f, 0xe29befc2, 0x9922f8c7,
-	0x3ebb4765, 0x2b9d852b, 0x26e7b120, 0xa26b5fe0, 0xccfc6244, 0xff9781a1,
-	0x61d4f108, 0x06cabe0b, 0xea156b3c, 0xdb465861, 0xc79c6ca5, 0x28f74263,
-	0x3ae6cf18, 0x02f5fb8b, 0x6a72e345, 0xdbf40b12, 0xef8521db, 0x3a52c0bd,
-	0x91057b8f, 0x37c0ecbf, 0x8c29d022, 0xb1448ba9, 0x303a43de, 0xe61b089f,
-	0x5187e0b9, 0x33c44bbf, 0xc61b614c, 0xf6cc7e8d, 0x7888d643, 0x03a8836e,
-	0xedc9bfb4, 0x4297f82a, 0x1ae77e88, 0x40be77f8, 0xc4c8316b, 0xc608b2e0,
-	0x7cedad93, 0xa039d853, 0xaffb7a3e, 0x5237df4f, 0x548f8173, 0x1ce8372c,
-	0x694ef514, 0x5ff2df42, 0x12f38189, 0xdc58abc6, 0x2a5f5acd, 0xde4017e9,
-	0x0bc2e5ac, 0x7e053a7f, 0x6467aaf4, 0x3ca7a3f4, 0x41bf4723, 0x045b35f3,
-	0x076d53f4, 0x770fe89d, 0x51f2c23e, 0xfb43a28f, 0x8c05db73, 0xdbd9d507,
-	0xe201bdef, 0x0488cf8a, 0x19708dfd, 0xe29d8bee, 0x59fb2673, 0x80079cbe,
-	0x9a1cb66a, 0xec57df0b, 0x77d813b7, 0xf16e79a8, 0xf9a06fb7, 0xf464c7c5,
-	0xac766a51, 0x657f6050, 0x40885849, 0xc1326bbe, 0xc4fb43f1, 0xbeda0ef0,
-	0x369edbcb, 0x2bfb0dc7, 0x455da20e, 0xa7b4f6e1, 0xa9f4a6cd, 0x0d353f0c,
-	0x2ddcabbe, 0x98ffc1f8, 0xa38eccf2, 0x9abbf419, 0xa73c0427, 0x45cbb550,
-	0x9cba18b4, 0xdfa3136a, 0x9d33f880, 0x8bc5f827, 0xc034eb49, 0x0d8ecd7b,
-	0xb713168a, 0x9230d33c, 0x7cdef668, 0x1c7413cd, 0x93ed5dfa, 0x58a61f82,
-	0xe041236b, 0x9ce7ce8f, 0x30dcdb65, 0x08ca15bf, 0x59abcc0f, 0xc38b7681,
-	0x7ec1f6f3, 0x8b78657a, 0x57d68d32, 0x2945b23e, 0xaaa7e18f, 0x2d10d75d,
-	0x6d4e3f86, 0xd4bf4dce, 0xae867b7a, 0x54f0b15b, 0x88b7a612, 0xc4665614,
-	0xc8767bec, 0x453f9c49, 0xdf06ff53, 0x18275e87, 0xef3d0ac7, 0x741abc41,
-	0xbd32a65b, 0xbcedd060, 0x7528e9ca, 0xb388cd17, 0xd02f7aaf, 0x2af10ec1,
-	0x1bfbd315, 0x6c6e987c, 0x9b3e90d0, 0xe1577f00, 0x7b9606be, 0x88629127,
-	0xa275788b, 0x3c9f52c2, 0x21962f5d, 0xf960124e, 0x8283dbb4, 0x1bf98976,
-	0x383926e9, 0xb75c820f, 0x964c4fc9, 0x49bebae8, 0x7e252e09, 0x77b4be3a,
-	0x6075c972, 0xc8e705a7, 0x1d9fb0a9, 0xe8f160ac, 0xa2e40f88, 0x7ccbef89,
-	0xd6f2664b, 0x7c60a194, 0x8bf7d364, 0x41eda1b6, 0x7d365e18, 0xec277cbf,
-	0xe67ed1ab, 0x1aae54ca, 0xee4fda65, 0x9b49fbe5, 0x4fd4d13b, 0xa30adcda,
-	0x8fd8c59f, 0x6cfd6073, 0x19bd7b9a, 0x4695b99e, 0x8fd8f53f, 0x4af36067,
-	0x199263bb, 0xb1aa3b9e, 0xfddbf49f, 0x06881f68, 0xdc7690ff, 0x4eef7517,
-	0xc496b71a, 0x1fe4d1f2, 0x2a1e78c3, 0x947cb155, 0x24c13138, 0xb27a494f,
-	0x74a83f29, 0x6a7da9b0, 0x9f54c720, 0x85b5765e, 0xbfa8dd2f, 0x8a814f31,
-	0xab38b126, 0xbd415832, 0x81d83c53, 0xbb06bbf9, 0x75dcef51, 0xb02af07d,
-	0xd05600f7, 0xc12977f3, 0xbe1c6a31, 0x0812f3a1, 0x1b34cfc6, 0x32ec7da4,
-	0x7939efbe, 0xde2357c8, 0xd9d7dfa7, 0xd12447ba, 0xf14a43fc, 0xadef3023,
-	0x8de3b332, 0x9d824338, 0xce6bfea0, 0x8a16da2e, 0x50cb6bc1, 0x6f422fca,
-	0xd0722dbf, 0x73b8fc07, 0x4a576ff5, 0xa1a6be14, 0x7a6e1e0a, 0xe1edfe5c,
-	0x9b99b510, 0x00fb9687, 0xea8576ff, 0x15f1d88f, 0x8e3e7e3a, 0xdfc61bbf,
-	0xd93b332b, 0x673dbe3a, 0x477c69a2, 0x7c698556, 0xa7c74287, 0xf56fb1f2,
-	0x8a7c7c3b, 0x7909ebbf, 0xc7077e56, 0xe05567b7, 0xa90acdf8, 0xd09f8d30,
-	0x9001fe33, 0xcdfdc39f, 0xf37ae73f, 0xcd2ab3fc, 0xfcd857f3, 0x80feae8f,
-	0xf3809f8f, 0x80fe597f, 0x92ab3fcd, 0xfacedfcd, 0xdbdf19ed, 0x6157ff83,
-	0x37f5affe, 0xe649dcff, 0x36ab0ff9, 0xc6cedfcf, 0x27f5637f, 0x8e377c7c,
-	0x09fca6ff, 0x6ab0ff9b, 0x07b15f1c, 0xca47c0fd, 0xf07a8490, 0xa461a99f,
-	0xa35d4061, 0x923a40e3, 0xc837a9c5, 0x5dc70839, 0x3eef8c09, 0xe6fca04f,
-	0x24a7d5ee, 0xea90254c, 0xd3ce5acb, 0x158bbb55, 0xd0842fe6, 0x41c4585f,
-	0xc45fb85d, 0xb46c8cf5, 0x78538787, 0x218bf73b, 0x78dc2fc8, 0xac5b9e23,
-	0x77dc13b3, 0xfa3056a7, 0xc0f1ff1f, 0xf3b1ade8, 0x5a8ba6b2, 0x13fecb65,
-	0xef38c783, 0xa6ab2454, 0xa78829fc, 0x127c3d50, 0x9e9a1ffc, 0xb478e996,
-	0x83f043fc, 0x1b958aae, 0x768c2e76, 0xce9f2277, 0xfe1cbbeb, 0xf7c31253,
-	0xdc053ba9, 0xc37cf847, 0xd9f40552, 0xc99756a2, 0x74e3a86f, 0x8ece7eea,
-	0x79c68dfb, 0x14505bbe, 0xc1fdf909, 0xbb051d6f, 0x41e6f171, 0x276eefa6,
-	0x1470d5e1, 0x79fac173, 0xff3a5543, 0xe3eccadb, 0xeb6b8c44, 0x9c1c5843,
-	0x49b8810c, 0x7906db59, 0x52dccd08, 0xf9ec9b26, 0xfce6835b, 0x7ce6156d,
-	0x6d961ca7, 0x112ccf60, 0xefda16c8, 0xcb65ebf7, 0x8e3600b9, 0x76e64957,
-	0xbbef1b25, 0xb4198694, 0x8e90fbe8, 0xe9156283, 0xdf65573a, 0xddd4f01a,
-	0xae28932d, 0xb8a91dc7, 0x454a140f, 0xb2a82dbf, 0x9de15b79, 0x00f43b2b,
-	0x8fee6785, 0x15a7c444, 0x2e838efe, 0xf3ed46dd, 0x907fcd8e, 0x9d6c7e21,
-	0x3bfe158f, 0xa3e75b96, 0xcc3eb02a, 0x19cb590b, 0xa9f9589f, 0x36f17f6e,
-	0xf37b3db3, 0xb5fb58b6, 0x530cd76a, 0x56f8497e, 0x9bc5fb53, 0x17ea99e7,
-	0xd5312eb5, 0x6a59682f, 0xfd0bcfca, 0x8efed4c8, 0xf54c2be5, 0x635fafdf,
-	0x62adbfaa, 0x6b7f2983, 0xfb5321f0, 0x98b6ca5b, 0x47076dea, 0x68e4077d,
-	0x9e22ebd5, 0x3ee0bdfd, 0x9bd82f75, 0xee12dc17, 0xed447e73, 0x33839015,
-	0xb4815ed4, 0xf478ff73, 0x2c1ea9a7, 0xf9a24d87, 0x2d5598ca, 0x0997a099,
-	0x6572cfea, 0x24d0aac2, 0xd7b0178a, 0x9b887ca9, 0x041d1215, 0x0f724cce,
-	0x318b771f, 0xa9971df5, 0x7d054cdf, 0xb17adf7c, 0xdd797e23, 0xd4c379d6,
-	0xaf6a7e38, 0xb02192dc, 0xce5975ce, 0xb569189f, 0xb1a73ce5, 0xeb817dbf,
-	0xe9856ad9, 0x19bdea83, 0x86736193, 0xe223e5fa, 0xf9ec9b9d, 0x0db0223e,
-	0x53feb048, 0x98861f81, 0x76aa6bf6, 0xfbe49ae5, 0xe11121ec, 0x409d05aa,
-	0x5217eaf5, 0x72028d60, 0x35923d16, 0xa1c0346b, 0xef4055af, 0x75c54fec,
-	0xe9436cfd, 0x3fafd836, 0xf4c010d3, 0x4c3286a3, 0x3104354f, 0x02a1b0fd,
-	0xf50d93d3, 0x2c347698, 0x86bdf4c7, 0x36efa610, 0xbbfa60b4, 0xdf4c5686,
-	0xe98cd86a, 0x4c610d1b, 0x4c741b3b, 0xd1e8790d, 0x0f6e01bf, 0x84d71b1b,
-	0x2e7cc3db, 0xe73da98d, 0xf7ff70c2, 0x11f3fbbc, 0x7f9fef60, 0x6cfb8ecb,
-	0xcacbe1fd, 0x51d3fd6f, 0x3ca57b47, 0x639d083c, 0x8133bd6b, 0x2369c9d1,
-	0xec1c64a5, 0xcff4ecff, 0xc4bcc7cf, 0xfd84f52e, 0xfa713c33, 0xfa5d7885,
-	0xf444e9e5, 0x949982ee, 0xfe1ea71e, 0xf7e822af, 0x607fac02, 0x71111c07,
-	0x6dd1261d, 0x95d7a07e, 0xe1784de2, 0x2f1059f7, 0xbf83d73b, 0x8b882cf6,
-	0xd8a8ab5d, 0x3b36f9ff, 0xf9d2f881, 0xcfbc2e03, 0x36d8fe75, 0x32e3c82f,
-	0x3d8e189f, 0x6b4d6147, 0xb761d922, 0xe736efc9, 0xa50ab7cf, 0x689a1e78,
-	0x0347b389, 0x3861a95f, 0xe0d9d20f, 0x67e8d4c3, 0x71c14f99, 0x65caecce,
-	0x5e7e3371, 0x424eec83, 0x277ea57e, 0x869fffb6, 0x0c7ebfa7, 0x23690878,
-	0x5e08381f, 0xdb98bb71, 0xf97efb7f, 0x814cfa49, 0x20392af8, 0x82f60e7f,
-	0x1177fe9d, 0x6122651c, 0x2eb7e8de, 0x63ec8622, 0x69b77ca0, 0x669dfa3c,
-	0x7317f4f8, 0xe6b7c52e, 0x042234fb, 0x9c46bf68, 0x80fe0aa4, 0x02f530f3,
-	0x788cabc6, 0x6ee49749, 0xc6f4c611, 0xbc78ea4b, 0xa1d1c6b8, 0xb9d16904,
-	0xee4bdcb6, 0x38699e9f, 0xaf39c2a6, 0x02ab470a, 0x64454fce, 0xb9e80954,
-	0xd2ab6d73, 0x12ac1ec0, 0x2f15dfcf, 0x67679b7e, 0x6125bd71, 0x8ebcdbb9,
-	0xb420fe72, 0x1d9ca35f, 0x8a9f7472, 0x31b59fc9, 0xefdadb3b, 0xf6c0fb04,
-	0x1f776a2d, 0xd683769f, 0xfbb54f17, 0x3e30553f, 0x5c53112e, 0x7bdfc0c9,
-	0x9d82604a, 0xd772a9e2, 0x7e8f68fb, 0xdc468724, 0xd4fd097d, 0x9f6e7e77,
-	0x88727ce9, 0xf338c3b4, 0x8881f227, 0x743bcb76, 0x15f8fd3d, 0xe4db9d99,
-	0xf67b80e7, 0xfebef995, 0xdf9b9e02, 0x84e78556, 0x8ff7de3e, 0x242dff68,
-	0x81d22f01, 0x1d8116b4, 0x4ad88e79, 0xc8e74f01, 0x31f1de6b, 0x3a95b874,
-	0x05ef404a, 0x863b662d, 0xfca6bfda, 0x7ce6cde2, 0x06999939, 0xa37ca4fa,
-	0xce02c24c, 0xb37f54cf, 0x177ec55d, 0x5826fa93, 0x8fee2557, 0x348957cc,
-	0x9ad5ea84, 0x34567f67, 0xb411c28f, 0x88c83f33, 0x66492cbf, 0x4a656076,
-	0xc27d8158, 0x7fc6da0f, 0x832006f7, 0x7104dc3d, 0xfc489228, 0xfc5f483b,
-	0x56fc295e, 0xbaf58d78, 0xc3881c4f, 0xe212ee21, 0xdad603ee, 0x86cf6e05,
-	0xe7c03d30, 0xc705f86d, 0x7615f92c, 0x2452de7e, 0x9cfdd022, 0x12d908ea,
-	0x851fdeb1, 0xbb5edc78, 0x7106957f, 0x7b6ac0fc, 0xdfdc6f6a, 0x0f649768,
-	0xe159f962, 0xf73c72d5, 0xf00b4520, 0xef8f21de, 0xc41f9c2b, 0x9c016f04,
-	0xdc40f523, 0x3a75ce1e, 0xdf215bbd, 0xf3c0a9e4, 0xef20751f, 0xbc7bbfb4,
-	0x9c418ed3, 0xa35a41da, 0xbb5fe53a, 0xa01fb2cf, 0x902ef399, 0x5067d04b,
-	0x09a2e780, 0x235cb9c6, 0x7e3cedcd, 0x2e31fe73, 0x4381748f, 0xdf39ee3e,
-	0xe14770e6, 0x2899093c, 0xb7f1ed9d, 0x63dfc072, 0x56fdc3f0, 0xcaa77f68,
-	0x7df2d7da, 0x9edf3bdd, 0x097c9e9c, 0xa5f7547d, 0xeb31c240, 0xadd49d48,
-	0x7dd61f00, 0xd7f96129, 0x5d1a9bd6, 0xe6f46355, 0x59f04a2b, 0x27a604fb,
-	0x8e813e01, 0x64dfbb13, 0x027087bd, 0x2f4261f8, 0x386d7c3f, 0x7f498852,
-	0x8f04a7bf, 0x6be383c5, 0xd3ebeff7, 0xbbe009ff, 0xf3feb1ff, 0x11dff4fa,
-	0x679afe0f, 0xd10becf7, 0x17f2b5f5, 0x10e1780f, 0x6b52c7d3, 0xacef9c1a,
-	0x0bdab1de, 0x1491f972, 0x3f5d02f2, 0xef718b0e, 0x0c3ba6e7, 0x70ddd3be,
-	0xf396b08f, 0xaf9f99dd, 0x2ff836fb, 0x5590ef9f, 0xb2ec0f8c, 0x2994ed47,
-	0x3096db6b, 0x7f65d8f9, 0xf19be59f, 0x7edd53bc, 0x7ca8beb3, 0x0d3481fc,
-	0xb885550f, 0xff451cff, 0x7ffb76a0, 0xabbb034c, 0xdea3748e, 0xe3077eb3,
-	0xf68c997f, 0xb1253cc0, 0x0e71bd6f, 0xa5e38eab, 0xde1d6dae, 0xbb6baf13,
-	0x9a1334f9, 0xad3bf40e, 0xbb7055df, 0x9f30e1df, 0x42f034df, 0x5feeccc2,
-	0x0583c4f5, 0xceb853ef, 0x2bc57f6e, 0x29f2c7e4, 0x23e77fd3, 0xa5fb1e0b,
-	0x755cbfd6, 0x6b18fd52, 0xb4eb1b5f, 0x2bfb9fb6, 0x2d5a5807, 0x0fe0bd47,
-	0xf1916f56, 0x9ef57bbc, 0x861f3b6d, 0x76dbccf8, 0x7fda70ff, 0xde979ed5,
-	0xabe69eb8, 0xa653929e, 0xe1b869b3, 0x9f41a29e, 0xf2dffa3a, 0xa8f4bd71,
-	0x4525fa7c, 0x7fcacd1b, 0x974bdc9c, 0x290ea7aa, 0x7c5f7464, 0x521c894c,
-	0x85b67ed8, 0xa7f7913e, 0xeab15f81, 0xd0142f89, 0x141f1f5f, 0x1c767a48,
-	0x09796e7c, 0x13c063ed, 0xabd393d2, 0xf6967e87, 0xa82e9475, 0xb2f42d17,
-	0xaf98fbb6, 0xc42fd007, 0x3f7f29e3, 0xb7d84bf9, 0x0fdd9df9, 0xf278a878,
-	0x9f30bc9f, 0xe33d52d3, 0x4ead9ff3, 0x1520fb83, 0xc54d2872, 0x3c579594,
-	0xbfe403fa, 0x907fc7c5, 0xeac5cec6, 0x575cfc19, 0xd173cc06, 0x9e707323,
-	0x7c8824e5, 0x7633f158, 0x4482fccf, 0x238a9f4a, 0xd839f727, 0xab7a763a,
-	0x4f11371d, 0xfb0242c3, 0xe189af18, 0x640f181d, 0x607f0de7, 0x65913fec,
-	0x60e0bf98, 0x30e45af4, 0xa5d1f1ee, 0xb77f9624, 0x9d03b737, 0xd3d50cce,
-	0x475c8e21, 0x87c710a4, 0x2bf69170, 0xce9a9f1e, 0x52681dcf, 0xea8eff11,
-	0x0e5029ff, 0xdd65dbed, 0x8efa6059, 0x1deecc5c, 0x3e3e4eff, 0xec013b85,
-	0xd469d3d7, 0xbf338c1e, 0x9d630e03, 0x0c5676a6, 0x3bc8c59f, 0x6bedff93,
-	0xf21bbc98, 0x0a519e1f, 0x609d9ff5, 0x81df0472, 0x8ae142fd, 0xa1fd63a6,
-	0x07ea02d9, 0x93c6893b, 0x9732edf3, 0x95bd7373, 0x12fc285f, 0x7c3dc7ac,
-	0x2324e303, 0x2dbed01d, 0x8fbf48df, 0xae30abd5, 0x86bf6fb7, 0xfae62f1c,
-	0x1f45ad60, 0x07524790, 0x2d5b7fb4, 0x0c3e7787, 0x35e54bf2, 0xcafc81a4,
-	0x27c15ef8, 0xf1bc8fbb, 0x9fb72a3d, 0x35b90c44, 0xdcab55eb, 0x409dec56,
-	0x27edc9e2, 0x2b893f6e, 0xae3cb4b7, 0x903bbadc, 0x7ad6ff9f, 0xd3e3c0d5,
-	0x7a1a3c16, 0x5a7c3fb2, 0x1db7e4f5, 0x493d5c5a, 0x45209dff, 0xe0d1f97d,
-	0x2aff8343, 0xcf06a5ff, 0xa9f0f50b, 0x7c3d87c1, 0x9f61f06a, 0x8f09a478,
-	0xe1bbfad6, 0xc0853a6f, 0xcfc63273, 0xfdb00fab, 0xd1ddfa67, 0x2f888521,
-	0xd239971d, 0x4a48747a, 0xc96c3e6c, 0x75ed2c47, 0x69603e4b, 0xebe4b41f,
-	0xf7abed4d, 0xb9d8511f, 0x9da9a89e, 0xe4a7fcb8, 0x01f13883, 0x6baa1d63,
-	0x010954fb, 0xf1bbb87f, 0x0925797b, 0xfe5e2079, 0xf2f188bc, 0x26e38a2e,
-	0xeed74e3a, 0x608f7c6c, 0x57c593b5, 0x2f6ed4ba, 0x93ab93d8, 0x553bbe58,
-	0x683d0269, 0x593b7794, 0xd02bafdc, 0xb18a4ded, 0x203fdeef, 0x08ef1ea2,
-	0x7e78d293, 0xa140de28, 0xfd20edf8, 0x80fdb3d5, 0x61d7b02e, 0x30ac84bc,
-	0xd154e3f0, 0xe21cb59d, 0xde22ad35, 0xe2b85b6b, 0x239c2f16, 0xfb903ae9,
-	0xbe5a329d, 0xdb22d7e8, 0x52e90ca6, 0xf81f8c46, 0x9a6d0911, 0xf5fec024,
-	0x059fe47a, 0xb85f9807, 0x797c7d70, 0x95dfe4a8, 0x4054efbb, 0xee7f52ef,
-	0x87beec64, 0x23c54fd1, 0xff03f296, 0x15a6e5c8, 0xdb951fe3, 0x1e41f5cd,
-	0xe4ec183f, 0x92c7bee7, 0xb77fdcb1, 0x9e0fdec5, 0xa77fe62a, 0xeba7d28c,
-	0x3ce04898, 0x2203f9c1, 0x6efce7d2, 0xe3007e76, 0xbf01d7fc, 0xe7b12b77,
-	0x7c82cea9, 0x1ebfd55d, 0xefccfb3b, 0x3e06ee8b, 0xc14ef7da, 0x767a694f,
-	0x7e23dbdf, 0xdf67f905, 0xf4877acc, 0xa0e53f6d, 0xba55f713, 0xff907a0e,
-	0x4dff9ebb, 0x7f90ddd6, 0xecf18ece, 0x145f83ae, 0xad753f00, 0x1e8057b4,
-	0xefe7e2ec, 0x45ff3d56, 0xbfae0741, 0xa9c7488d, 0x9f4fe64e, 0xef5ff03f,
-	0xf381fdc1, 0xc0ace807, 0x42e838be, 0xa5fbaaf9, 0x5d6fe313, 0x14517fcf,
-	0xa5fc27eb, 0xfbe5a9f3, 0x521e5d9d, 0x4be017b6, 0x7544fb62, 0x1b6ebabf,
-	0xd3512fbc, 0x40594876, 0xf0bca7eb, 0xafd002a7, 0xdd997b5d, 0x3c7729d4,
-	0x8179fb0a, 0xca340f35, 0x209d5e94, 0xff698364, 0x0128de6b, 0x978bea39,
-	0x715c613f, 0xfc58f8a0, 0x043e0d7f, 0x4f3fe99d, 0x29854c18, 0xdef8ff07,
-	0x0e27a03b, 0x8d2f91da, 0x59127ef9, 0xe5ccf681, 0xfff4dde6, 0xe885bcdc,
-	0x03bde640, 0xefe13de6, 0xc0d7de77, 0xbed4a1a1, 0xcf97d072, 0xf30bbf9f,
-	0x847e3c7b, 0xfefc8077, 0xfcf9dfd2, 0x7bee98af, 0x97bddd29, 0x7f87f79f,
-	0x9feef3e7, 0xcb9ebfee, 0x79c2aee9, 0xfe17ba98, 0xa95df084, 0xfe12939e,
-	0xbfbde5be, 0xfef61bf9, 0x35bf9b5a, 0x93cf1b27, 0x70b0c03a, 0x40b6667b,
-	0xc8ed7178, 0x9dd82a99, 0xd5ef3f62, 0x7e60484c, 0xf7b02895, 0x1650c821,
-	0xcfdc240f, 0xf80d6382, 0xdd9b880e, 0x4ddc933b, 0xc9137768, 0xbc53aedf,
-	0xbe7abdac, 0x911acf1f, 0x21056f71, 0x8fc9399f, 0xbf8b6ef1, 0x5d1028d9,
-	0x74aef6a0, 0x818f37f5, 0xb48f23df, 0x9805ed45, 0x33690fbe, 0xaaca638f,
-	0xdc87f262, 0x53bce6f9, 0xbcede733, 0xf061073f, 0x0c247c3b, 0xd4716cf1,
-	0xd3ce1561, 0x02256389, 0x4938a54f, 0x0efc086b, 0x7dfccfbb, 0x7ee10252,
-	0xc7865fef, 0xa716048a, 0xed718512, 0x9471e03a, 0x78dce30d, 0xe2f11b48,
-	0x08baf7c7, 0xf17baff7, 0xf80ed4da, 0x663fc094, 0xd5fa17f6, 0x12d3fb84,
-	0x691a42ef, 0x76e69dd3, 0x2cbe8fdc, 0xb25d189d, 0x969d39aa, 0xd062e899,
-	0x4c7d0e21, 0x7cf03174, 0xd2b1f4a5, 0xebff8ac5, 0xf75f1813, 0x2e832f47,
-	0xef1d6e99, 0x7fdcc9d7, 0x133f0128, 0x820199f2, 0x7fdcabfb, 0xbc745290,
-	0x7eaa24a7, 0x7e0097bc, 0xe01a945c, 0x86deef2f, 0x3f73a4f1, 0x00dbff7f,
-	0x44afd54f, 0xebf8a0e2, 0x5121eddc, 0x2b0a5ef8, 0xb6569fe0, 0x404fb889,
-	0xacd168a4, 0xc3627d98, 0x85faa80f, 0xb953e707, 0x4e9e1ed7, 0xf7dcafbf,
-	0x61da0141, 0xcfd1bb2b, 0x605cfd09, 0x14750f74, 0xa5703ec0, 0x2b11fcc4,
-	0x6049acbf, 0xcfb396f1, 0xae20cab9, 0xe762ec23, 0xb7232b7f, 0x7398f6c8,
-	0x9904a14d, 0x739e9bc5, 0x3d085ea1, 0x28f9e021, 0xdcf62f80, 0x9c87e1a9,
-	0xf060427d, 0x9df197ed, 0x4f5dca98, 0xaa7c4275, 0x1fbb2df2, 0x5dbaf8cc,
-	0xc87ee29f, 0xf1ec5f94, 0x2e1fa076, 0x7d12e29a, 0x44bb01e2, 0xb6da8fe4,
-	0x6843f41a, 0x36a2f91e, 0x2beffdc2, 0x7eab57f4, 0xb83efcf1, 0xf4f55670,
-	0x7f885ee3, 0xe1df699d, 0xaec0b8c5, 0xfae7c74b, 0x3591fff8, 0xd6ffffdc,
-	0x3b4f7669, 0x067fffbe, 0xf176a0fe, 0xfb9609d3, 0xb106bbab, 0xb44914f7,
-	0x71ef52e8, 0xf0b9ed55, 0xcfafc428, 0x51e4fdee, 0xcffabb80, 0xfc14787f,
-	0xa9d0720a, 0xba827dc2, 0xf18ebf9f, 0xdfbbe33e, 0xf9d03d70, 0x2f18e3c4,
-	0xfa9b7ced, 0xe75ff41f, 0xc0b3a7f3, 0xea7ceccf, 0x4f10698f, 0xa9f9f3b9,
-	0x9dce6ef8, 0x27494ccf, 0x9189f471, 0x0786ff02, 0xd2b5af10, 0x11db48ed,
-	0x51ce7ff4, 0xd9ff83ba, 0xd489d713, 0xc69978b0, 0xe3bb39e3, 0xc4fbc7c7,
-	0x7d66da6f, 0x4842c6e7, 0x0646bf65, 0x4139c710, 0x006639e9, 0xe3cddc74,
-	0x5d6f9175, 0x0e738e32, 0x3af4a0fe, 0x85e3a16b, 0x3d8f45b6, 0x836d750c,
-	0x44e38dfa, 0x233f8007, 0x413fbefe, 0xe40122ff, 0x60bfef68, 0x37e80cfc,
-	0x73b84e9d, 0xd82c85cf, 0xee48f8bf, 0x85ef8b9e, 0x21576f3c, 0xfcf9511e,
-	0x9d4f289b, 0xf8c71ccf, 0xf071e136, 0x8ff3d24e, 0x99f92bc5, 0x1eedbacc,
-	0x74e1ff16, 0xe690f880, 0x071e72c5, 0xc46d7c62, 0x0b8bfa87, 0x73b1718d,
-	0x40bec627, 0x7877f6cd, 0x6e97a5bc, 0xd7a044c2, 0xcfdc97fb, 0x02a0f030,
-	0x8d8dae1e, 0xc38fc67b, 0x2d3dc4f5, 0x427a0374, 0xae27b3bc, 0x7b13d849,
-	0xcde16175, 0xcef47178, 0xda5e2c2d, 0x8f3fc729, 0xaf41c465, 0x9fe25976,
-	0x3fc581e1, 0x2b8f372f, 0x9760d3c5, 0xf15afd86, 0xf8abf675, 0xae5bfdfa,
-	0xe85f9d81, 0xdaad7f77, 0x3de61f7c, 0x05dd3825, 0xef6d6bfb, 0xa7cf042b,
-	0x2b73b374, 0xf967be7c, 0x3fb3d3f9, 0xd62e3117, 0xfa823914, 0x8c3faadd,
-	0xbc2b57fd, 0x6b787077, 0xe3f5b3f7, 0xd84f5eec, 0x7b39fb4d, 0xebe439f8,
-	0x63efddda, 0xaee8ee5c, 0x988e95a7, 0x8fd616f5, 0xce7ccc70, 0x80a8793e,
-	0xdfe379c5, 0x3171ab1b, 0x40eeb37b, 0x76ea71fc, 0xa71a6a7f, 0x9851142a,
-	0xf1e9701d, 0x2dfa48ce, 0x7699dfd0, 0x3a4ddf19, 0xbee31113, 0xc9701c17,
-	0x95a11f7c, 0x475d0fc9, 0x71c09ef1, 0xf0a77f76, 0x573c04b5, 0xd2f1e77f,
-	0xb7fde077, 0x8358a93b, 0x82b6dfdd, 0x4fdb69f1, 0xef4021f4, 0x13dfe3b6,
-	0x07dafd61, 0xffb18df8, 0x4fd44e8b, 0x50fd50f1, 0x10a06ef4, 0x77aad5d8,
-	0x66cb7dae, 0x938e9f82, 0x2342eb0e, 0x83ee07ed, 0xbc39b9c0, 0x569dee57,
-	0xaa88f00a, 0x7d0a754d, 0xf9bb21e7, 0xafde557d, 0x21ef9aac, 0x6bc6af90,
-	0x266f8fd0, 0xcc664b8b, 0x9f165232, 0x87f7190c, 0xabc213ca, 0xaf7f7ce8,
-	0x28bb3706, 0x8d9e7c5e, 0x78112fd9, 0x06a26a27, 0x2e63d3f6, 0x4bc1de7e,
-	0x83bcecbc, 0x7aa3643b, 0xf6ff61fd, 0x9e08930d, 0x7c06d867, 0x819e73d9,
-	0x2f800b44, 0xea7d768d, 0x321de72d, 0x5a2a13e1, 0x17338722, 0xfd5025ee,
-	0x77866ab2, 0xf11fe42b, 0xb2cdf7b0, 0x3821f748, 0xdb8db0df, 0x1560d9a3,
-	0xe77df6e7, 0x6fbeebec, 0x78a53296, 0x853f30e9, 0x535ff5d3, 0xca7c5ce1,
-	0x0d4fc52d, 0x2d856951, 0xa3dc1a63, 0x78bc7949, 0xcfcd066c, 0x34f4ff5f,
-	0xe2f7ffac, 0xff3459b1, 0xb20e7b93, 0xcf012afa, 0xaeb0bec1, 0xeff01a76,
-	0xd9fb96d7, 0xb9663314, 0x77f0057f, 0x77eef02e, 0xae706917, 0xefe15ba2,
-	0xdda00465, 0x7f0c89d0, 0x9f77ee99, 0x98657f02, 0xf00563ad, 0x7fcf63eb,
-	0x16f78491, 0x2aa1fbf9, 0xdce15469, 0x789a2d15, 0xf3e712f1, 0xccfbbcfa,
-	0x498dcbf5, 0x3f8177c1, 0xbc8de79a, 0xef1d1a6f, 0x0e718ae1, 0xf2d00e76,
-	0x829aa34e, 0xe9c85d74, 0xcb3df84a, 0x8b3e7c45, 0x02c290c5, 0x7f5caddf,
-	0x5751ef19, 0x1ef4578b, 0xdbab8735, 0x67fbefd5, 0x3378007f, 0x007f8293,
-	0x3fdf59fc, 0xb815c57b, 0xe519f500, 0x5c7de25f, 0xeb333de3, 0xea4468bb,
-	0xfb3efb8e, 0x5a2efe56, 0x9bfef07f, 0x69ba283b, 0x682f39ff, 0x39518f7b,
-	0xf150b31b, 0x31cfd1c3, 0xd2fd0bcb, 0x0426c220, 0x1fa71076, 0xf788cf3c,
-	0xb822ee1f, 0x1765db5f, 0xbbaff074, 0x7d4549fe, 0x3a70b99e, 0xae5d5ffa,
-	0x339c08ec, 0xc35bbaea, 0x018a3d7d, 0xe869e401, 0xf828c481, 0x3e1e5487,
-	0xe7c3c8b7, 0x8f37fe66, 0xdb5175db, 0xa9fd81df, 0xa06a3fbc, 0xed8bdcc5,
-	0xee9e9912, 0x8e10d06a, 0x087424a1, 0x8e81fdd6, 0xebe6e397, 0x46cfa737,
-	0x9eeb9e9b, 0xee1ff880, 0x28ffc18e, 0xcc74bf77, 0xe63a3377, 0xd1d0e3bb,
-	0x7bdd6efa, 0x6858e0ae, 0x28fcba77, 0x7d675fbe, 0xdf4aceaf, 0x21f5a93a,
-	0xed2b3b78, 0xfeb8a7c0, 0xb31bf418, 0x29d22c7c, 0x00939e86, 0x3e07318e,
-	0x06bc01b5, 0xe7ec1f1d, 0x9ba9793c, 0xf1d673ad, 0x063acad2, 0x9fb4e307,
-	0xf74cd6e5, 0x451c0a0e, 0x69ca897e, 0x87c58dba, 0xb7efb6fa, 0x9d4b9cff,
-	0x59502cf3, 0x73ff14bf, 0xfe064f00, 0xfbf3756f, 0x7ff17dea, 0xf8a3b43b,
-	0x3fe61dbf, 0xbbcffc00, 0xfb0dfe14, 0x87eb8abf, 0xa29fd82a, 0xda1ff47c,
-	0x3a1cb4cc, 0x8dd134ee, 0x8764b072, 0xd931f7c8, 0x3e865ffb, 0xfd5d7259,
-	0xb917b821, 0xf20267e4, 0xfefe42eb, 0xfdfc27e5, 0xc1b9eb4b, 0xea10b2f2,
-	0x1f9fcbcb, 0xaa3ea30c, 0xff2e65da, 0xbbcf7767, 0xde785997, 0xad352417,
-	0x2b4ebdf7, 0xb9bbcffe, 0xb4e858de, 0xd72f7bc5, 0xdbd68748, 0x33cce74c,
-	0x83f4f4a6, 0xa6cfa0fe, 0xb8f189bd, 0xc409957f, 0xa5297413, 0x2019de10,
-	0xf4094285, 0xd7e5cc5b, 0x72d86fe8, 0x1d9ffaf3, 0xcc43df32, 0x43df316d,
-	0xbe6ade1c, 0x66d57887, 0x51c43df3, 0xc43df361, 0x338d766b, 0xae4747e5,
-	0xb31fb537, 0x3f29b27f, 0x534dfa36, 0x66c7f1fb, 0xda13f29a, 0x7f6a67bf,
-	0x4df35bed, 0x5475d7f5, 0xf86fea9a, 0x7f299968, 0x9b3ff763, 0x311747da,
-	0x61b878fd, 0x5bdc1179, 0x7872f030, 0xa15362a9, 0x9b08e97c, 0x9e5b105a,
-	0x90056ba6, 0x7fe0e916, 0x532f27f5, 0x8a2a3f1c, 0x898ba75d, 0x536fd26c,
-	0xd47ce61c, 0x8f7dfe6d, 0x35722c97, 0xcb527ea4, 0xbc1d9a08, 0x63cf0f24,
-	0xc63af953, 0x01b1dbf5, 0xa0dfb7ea, 0x9b46d57c, 0x2f956f20, 0x9a01bde3,
-	0xad8fd886, 0x1f9f77b0, 0xd4f99a72, 0xf95e8fd7, 0x0738db9d, 0x53facad4,
-	0x264bc6cb, 0x3fca3139, 0x172d8c2a, 0x73c74f16, 0xabf5fd40, 0xb35c16f8,
-	0x3bbc107d, 0xa3530f3c, 0x16cca9bc, 0x67dfdcf7, 0x7fd0bfee, 0x8ec7dcda,
-	0x7cf00cfa, 0x26daf7ce, 0x7b56bf38, 0x51fa377b, 0x5e337619, 0x5decf37a,
-	0x479e0363, 0xac3e481a, 0xb6fdc6f7, 0xebe13445, 0xd177ce36, 0xe0d333db,
-	0x3f66419c, 0x87a155fe, 0x1b47ebe9, 0x042cd742, 0xe98711c2, 0xb456795e,
-	0x39f81a6e, 0xeb79f8c3, 0xe7f8b64d, 0x0c3c92a0, 0x48a0e92f, 0xdd505ec1,
-	0x2b9c2f68, 0x4f0bd77f, 0x0f68dcc7, 0x38e87926, 0x17b4c7f3, 0xbad4fbb1,
-	0x5ee8e67f, 0x947d0db8, 0x026c0ee5, 0x93e592fd, 0x17dd9688, 0x83dbf49e,
-	0x788ef02d, 0xefcdb263, 0x00b77cc6, 0x4c7fd9e3, 0x5e3a20c8, 0x84459fe3,
-	0x75f0f1af, 0xeec83e78, 0xabb8c7ae, 0xcfc24f31, 0xe6711809, 0x89d9be0b,
-	0xabc6cf80, 0xe107ee7b, 0xdc17907b, 0xf7e876c1, 0xc71946c2, 0x982c9c6d,
-	0x4b798dea, 0xf78dbf9b, 0x6cdcb2be, 0xde74e5de, 0x933db700, 0xa8f8d5c1,
-	0xae113240, 0x28f4bdff, 0x5cfb35f8, 0xc507def8, 0xc7c010c7, 0x73fb3d39,
-	0x3a79319b, 0xee419aaf, 0x9ed16bad, 0x4ea7ef89, 0x8fa1e637, 0xe33bd134,
-	0xe2fc332a, 0xc6fd1946, 0x3c6e4945, 0x886e10ef, 0xe79afa72, 0xf99be4df,
-	0x5c295b9d, 0xf8884eab, 0xd1d6b6de, 0xfd28f4ba, 0xe5cdbcae, 0xf17d6b0f,
-	0xf0634e7f, 0x7ba7f852, 0x4f36de40, 0x79e3f9c3, 0x31ff806a, 0x0d9c3c81,
-	0x452c17fc, 0x236c183e, 0xc7d36fb0, 0x7930f04e, 0xd951ed9e, 0x72be357b,
-	0x85be8726, 0xfda76cd7, 0x5dfa7995, 0xb0f36ff7, 0x4f36ff75, 0x72ff759c,
-	0x975707ef, 0x54851fb5, 0x37b445d4, 0x111fa908, 0x3d53476b, 0x1bfd0e56,
-	0xc7f13179, 0xff6fd005, 0x65bf9a76, 0xede5f644, 0x80cfb034, 0xecfb0d0f,
-	0xaed98f4e, 0x3fbbd18c, 0xfbbd30f4, 0xf4c0cf43, 0xfda18fee, 0xe345efe9,
-	0x4aa935da, 0xb4f7bd7c, 0xac1fdd87, 0xe7821553, 0x0fd9fb03, 0xdae5c9d8,
-	0xd6feef3a, 0x1ff9cba5, 0x4f832e39, 0xfcfefacd, 0xf4112d31, 0x4207ca54,
-	0x86b777dc, 0x3c6dbf2c, 0xad9b6bd0, 0xf7cc3378, 0x78fe1667, 0xf59f4d68,
-	0x18f1cc2b, 0x6ac78b8e, 0x099b478a, 0x973c3b8f, 0xb6bf0fb0, 0xdf30afbe,
-	0xf8e4e9f3, 0x09bf7aa6, 0xeb373bc6, 0x6b8822bd, 0x1cf9ced4, 0x1ed7fef5,
-	0xaebccca7, 0x1d397e18, 0xa1e00567, 0x799fd673, 0xe303ae7c, 0xb99eab4a,
-	0x58e2112a, 0x7a0d9335, 0xaa7df044, 0x4839f9f3, 0xecfb7397, 0x2e79c03a,
-	0x3d139d99, 0xa3daefb7, 0xa4f8f710, 0x2c7258e1, 0x793dcf7d, 0xfda648bc,
-	0xbc7bdb9d, 0x7703c248, 0xd43bd361, 0x5b7f1735, 0xdef77014, 0x37e1e84b,
-	0x368f5b07, 0xe57c593a, 0x37173841, 0x6abfda86, 0x7a65f212, 0x285eed9a,
-	0x1dbf1d17, 0x395c21fc, 0xa62fe63f, 0xd04ab259, 0x7ec11633, 0xee373cd3,
-	0xc972f967, 0x9dfa6cc8, 0xe387ad12, 0x6af9c4cc, 0x04efc098, 0xf1444eb8,
-	0xef3c02f7, 0x3ef86076, 0x02b243f1, 0xbdffc29e, 0x78093c1a, 0x09ab3a4f,
-	0x77c41a89, 0x471e6e8a, 0xd30a6953, 0x3ab7ddbf, 0x848cf7f0, 0x53aaaf05,
-	0x3cdafea8, 0xdd8efd93, 0x920b63f9, 0x55691fc0, 0x0df2de99, 0xb463e1eb,
-	0x6be7078b, 0xe6231737, 0x40577c75, 0x921d1955, 0x8a6b6c33, 0xf9c78c35,
-	0x25fe98f3, 0x3dff1a52, 0x1eb7ca29, 0x1c43a6cd, 0xc5cef8d8, 0xfc522bbf,
-	0x7803cebf, 0xf0fcdb46, 0xabfb8f4e, 0x92ca386f, 0x28ccfb69, 0x945e5fbe,
-	0xc39de1c0, 0xfbef07de, 0xd345e34e, 0xd4b5187d, 0x27b74efc, 0xe214b4d0,
-	0x6defd0fc, 0x8bcef8c9, 0x38a29eb9, 0x0bbb9691, 0x0aaee5cd, 0x47e18f9a,
-	0xf6d677eb, 0xae925f86, 0x37f63832, 0xbf0f1038, 0x79fd506c, 0x340e8f94,
-	0xb07f30f8, 0xda34c341, 0x0fcb1230, 0x2f31f837, 0x986cf4da, 0x7faffa4f,
-	0xeebb1490, 0x9d54efc2, 0x75c3e18c, 0xf9ade472, 0x88df8f80, 0xaf15af88,
-	0xdefe478e, 0x3a8e9a34, 0x7367bd86, 0xfefec632, 0xd257f2e9, 0x0d5f284a,
-	0xd3afd1f9, 0xefc3c64a, 0x17f3b096, 0xf63a4170, 0x257aee1e, 0xe093f9a0,
-	0x34c63477, 0xfbc2863b, 0xc95bc1a4, 0xfd239458, 0xbbf089c5, 0x6c337b0b,
-	0x949a7eb4, 0x07f8ecd7, 0x64deab80, 0xe7e7afe7, 0x6c9f1f33, 0xbce3afd6,
-	0x0a66ff4c, 0x71bce3c5, 0x537e09f8, 0x39acfd00, 0x3307b9c6, 0xbf54891e,
-	0xeb8a76e1, 0xdfb3efe6, 0xc754485f, 0xf7bde1fb, 0xcec35ecd, 0xbec5f7a9,
-	0xff99bee7, 0xe1e2440e, 0x29176825, 0x103bf63e, 0x0f7b0a29, 0x4d930489,
-	0xe5cdedef, 0x0606ccfd, 0x1f57d09a, 0x15fde6cf, 0xfb0e791d, 0x8897df83,
-	0xf087eff5, 0xccd8c3df, 0x3574d3f5, 0xed4dec50, 0x5bd4676d, 0x7759ebbf,
-	0x0bd1216d, 0x890143f6, 0xed04bd80, 0xd4bb698a, 0xdc02030f, 0xd7ce33ef,
-	0xcdf80b3e, 0x93ddfdef, 0xebc3027d, 0x8a7d3c93, 0xd4494eff, 0xe3079813,
-	0x123c16fb, 0xca7603da, 0x6206bb3e, 0x8fe47452, 0xf8947ef8, 0xe701c53b,
-	0xbc0f53fc, 0xd9e5eecf, 0xbf38143a, 0x7c5bd2b8, 0x4551c413, 0xf3033ea5,
-	0x816f4ef7, 0xfa9e83fc, 0xdda3d887, 0x1f0137c5, 0x06f7f3a4, 0x01000408,
-	0xe1aa080e, 0x43fd638f, 0x64654eb3, 0x2bf2cc9f, 0x873637bd, 0x3f5f2132,
-	0xf208f80f, 0x7dbfb48d, 0xc021c149, 0x86e16e47, 0x423763e6, 0x037f68de,
-	0x5789ffb6, 0x3b8ffe65, 0x4af60d98, 0x79a55e4f, 0x625e4c4f, 0xa960e279,
-	0x239abf31, 0xd073c47f, 0x3bd807b5, 0x6607a95d, 0xd4cf3008, 0xff1033fd,
-	0xbcb7d5e7, 0x878c342b, 0x04eb608f, 0xf41b978b, 0xa6e1ee30, 0x79f783d9,
-	0x9d61f863, 0xc4c76cd7, 0x0fbc27dc, 0x1fd3ddf0, 0x36cbaf8f, 0xf74a9ef6,
-	0xc6efd88f, 0x547b030d, 0x86b9b884, 0xa3dc2e69, 0x70c1fea7, 0x98395c12,
-	0xcde35fd6, 0xb55e3a41, 0xa9cdfb3b, 0xa75f2f5a, 0x80772964, 0xf8b54e3e,
-	0x3f5cd935, 0x7f8b508f, 0x372b4893, 0xf0b5c10a, 0x8f686c9e, 0x937de2ac,
-	0x4728195d, 0x228eb967, 0x5f3183f5, 0xcbbfefcd, 0x476b832b, 0xc4591e81,
-	0x76556ef4, 0xdfa658a0, 0x8d973d57, 0xf0670bbf, 0x2452555d, 0xf7bb9c6d,
-	0x3791b75c, 0x21e4477e, 0xef09d5b5, 0x5afb18f2, 0x6437fbb5, 0xc7fd3ec1,
-	0x3b46de87, 0x36624971, 0x76d359c2, 0x69df815c, 0x7ca36da9, 0xd8fbbf47,
-	0xa3c763d9, 0xc887f25f, 0xbe026fa0, 0xc368d0fe, 0xd9fdddcb, 0xfd522f55,
-	0xea85d3a6, 0xd3038368, 0xd5fd7a9d, 0xf09c0ae0, 0x49c9b82e, 0x1cf1e9f9,
-	0xeafe055d, 0xf51eb7bc, 0x3a8ae3d8, 0xd3aff80a, 0xe066c3fb, 0x9124aae7,
-	0x5f0febf3, 0x7ef8f3d6, 0xb9efcd3d, 0xbfa6edb7, 0xa160df68, 0x7ba9fed9,
-	0x41fc8dc4, 0x02df92ed, 0xb66ed51f, 0xb3fd6085, 0xbef1da39, 0x1be82773,
-	0xfbe65fd4, 0xa6051b99, 0x5873430f, 0xf772fa1c, 0x74be2b34, 0xfd8c7091,
-	0xe99124bd, 0x84290aab, 0x5f1576fb, 0x2ffeb17a, 0xba69c71f, 0x1c77da0f,
-	0xe31bd637, 0x838ef754, 0xf6fd527c, 0x5fcff461, 0xafb0dabc, 0x77ffd475,
-	0x61cfc53e, 0xe874f538, 0xd0d941e7, 0xa4cfd427, 0x1ee78678, 0xf9243e79,
-	0x47a97908, 0x2e6dacff, 0xf6fa04c9, 0x7eb313d6, 0xb74a25d2, 0x3e781297,
-	0xc9737f74, 0x13ed38a4, 0x8c73ed2c, 0x7fb14ffc, 0x3a0f3c2b, 0xda0ef37b,
-	0xbd93fa5e, 0x6df00f27, 0x4bfa59b0, 0x86dfc636, 0xb7fc19fd, 0x65fbbbc7,
-	0xa5e9ef78, 0x10f140a4, 0x2068df66, 0x15245b87, 0xc0d1877f, 0x3ebe1ef3,
-	0x8d797c55, 0x78bdff09, 0x9f95302f, 0xfb4cd06e, 0x2e178ba1, 0x7b3f7bc3,
-	0x41563af8, 0xdb3eec42, 0x7da6b923, 0xc70fffd0, 0xb8a385d7, 0xfe4a381f,
-	0x328c70c6, 0x385e81e9, 0x5fe54df2, 0x69310e17, 0xec366976, 0xa1b1ad53,
-	0x0b66909f, 0x6ec07239, 0xf7ec5ffb, 0x0734201a, 0x61a899e7, 0xce57da6c,
-	0x079f6039, 0x448e79c6, 0x40e3498e, 0x056d749e, 0x913f53ac, 0xe5a1afd0,
-	0x8619390e, 0xfde1d56e, 0xd8952a2b, 0xb0754e5f, 0xe6f51986, 0xab876277,
-	0xe5a258a4, 0xb879d5e3, 0xdd94e5ee, 0xfdf60755, 0xcfe17736, 0xbc931357,
-	0x5ab27da2, 0xc7f68a58, 0x9b17c49a, 0x3d38df61, 0x0233d981, 0x58f9b179,
-	0x267abc46, 0xbdf72daf, 0x31c41378, 0xaed4aeb6, 0xab6e7f06, 0x0c391c33,
-	0x6e3df9eb, 0xdcaa3dfc, 0xf816e175, 0x83710abd, 0x314bd70d, 0x2b6bbc29,
-	0x6078179c, 0x8bec1f84, 0x40d760ad, 0x5c6e35fb, 0x421a5bff, 0xe2af2f68,
-	0xf5f6c0eb, 0xe7385493, 0x9296e8dc, 0x916bbd61, 0xb8056feb, 0x64efba5e,
-	0xd03ae3b3, 0x4196fe63, 0x80cbef3c, 0x71cb4d75, 0x14f5e58c, 0x68575b19,
-	0x3485c183, 0x44ffc3f2, 0x33d412ad, 0x6b0ed127, 0x04ab2f74, 0xbfd68e3b,
-	0x7a78a0ec, 0x85e3993c, 0xe8f4e7d7, 0xa0cd93a5, 0xbd15c507, 0xef3a12f9,
-	0x7a633f1d, 0x3fda09ea, 0xe7452bbc, 0x18778213, 0xe84947bb, 0xc1242587,
-	0x74d0c76f, 0x9dfb0e74, 0xbd17aa5b, 0x3849c7e8, 0x491f635f, 0x0f7ec519,
-	0x7ac3da1d, 0x83919093, 0x0cca98fb, 0xe2835ef6, 0x66fde371, 0xdd5677e3,
-	0xb3a7f8c4, 0x67df2978, 0x43de5971, 0x895fae70, 0x784ee99b, 0x4f862137,
-	0x0b7bcb15, 0x07cc0912, 0xcd544b7b, 0xe449bfe5, 0xd8834afb, 0xb70eadef,
-	0xa32ed085, 0x35e98452, 0xd9f68a24, 0xf981d268, 0xe66de031, 0x0d2c35c2,
-	0x278d8e2f, 0xbbe2c8ba, 0xc7ec1101, 0x788d5bb4, 0x44f5f04c, 0x96bfdeba,
-	0xfc36e3c8, 0x66538c77, 0x7d7ee214, 0x5fab1266, 0x0fbbc815, 0x338dbcec,
-	0xc69c61a6, 0xf58cefb0, 0x16dfb0d2, 0xab579872, 0xc17b5c42, 0x3a16ebb0,
-	0xb6753e59, 0x8868e0fe, 0x0b53b66b, 0x2fee1b34, 0xf96af8b3, 0xb034e2e6,
-	0xba1e16cb, 0x4ce4ed15, 0x8b65d995, 0x8250ce36, 0xdadee1a3, 0x8a07f43c,
-	0x84484c37, 0x4ed5847d, 0x8575e27f, 0xfbe267e8, 0xc7b503b9, 0x355da6b6,
-	0xab71e419, 0xca90128d, 0xeeb24bfb, 0xb17c0b1e, 0xcced0f21, 0xc6c109ad,
-	0xd6efda24, 0xabfcd67f, 0x4ea7fe68, 0x8c38f0bd, 0xd5813ab3, 0xc051bbc3,
-	0x12e73d9b, 0xc9bbe1b6, 0x3d6f8dfd, 0x1252f097, 0xa8ca7f7b, 0x7e536fff,
-	0x80007d7c, 0x00008000, 0x00088b1f, 0x00000000, 0x7dbdff00, 0xd5947c0b,
-	0x66fdf895, 0x666579be, 0xf263c992, 0xc2130922, 0x9e4e5e4b, 0x124c2280,
-	0x4cb443c2, 0xe8202a10, 0xa79034f0, 0xbadc5d48, 0x30040cff, 0x5706b650,
-	0x84ea2b11, 0xbbaac562, 0x351ba341, 0xb88080ea, 0xda446dd6, 0x8ffd16d2,
-	0x4810154a, 0xfed2b58a, 0x39cf65dd, 0x7cccdef7, 0xb5f01993, 0x3efeb4ff,
-	0xe7ddf7ee, 0xce73df79, 0x12e973bd, 0x2c614dfc, 0x5630a494, 0x51c1d8ca,
-	0x618cf58c, 0x24dea98c, 0x064dcf06, 0x34e2d26f, 0xa37efac6, 0xf5e1bb67,
-	0x926f6617, 0x25d8c6c3, 0x79fa2ed1, 0xa0b199aa, 0xcdb3b189, 0xc11c166e,
-	0x336699d8, 0x1f966b95, 0x9fa0c698, 0xb9850e9a, 0xc55b19f2, 0x3f6336da,
-	0x69923baf, 0x3d0155dc, 0xf4648e0b, 0x5bfe0977, 0xd528fcbd, 0xebc9dd5f,
-	0xaa0eb2d7, 0x4f3192bf, 0xf76b3c07, 0x1cd0595a, 0x51df5fae, 0x4a1f69ac,
-	0xd7bf51d2, 0x3b06fb25, 0x5bdd8c9c, 0x2abefc3d, 0x5d569f78, 0xfae1f662,
-	0x13e38e58, 0x87afa8ab, 0xebe63af7, 0x77aeb188, 0x49de5c04, 0xac4e8a82,
-	0x32b1d0ed, 0xe03ad6c6, 0x1ec62e9f, 0x6c7cd850, 0x15f7f6b7, 0xc2632919,
-	0x9e2ad6ed, 0xf898c70c, 0xa8bc6a70, 0x88d48167, 0xc467dab2, 0x345e35f5,
-	0x0ef3fbd2, 0x63075fb3, 0x3ff4c91e, 0x7fac2d70, 0x1953eb26, 0x909f53cc,
-	0xcd5d8e38, 0x71258b58, 0xba673e37, 0x08a17d0c, 0x53333038, 0xf8337e71,
-	0xc4ebf62b, 0x71944769, 0xed403ed8, 0xa98ed967, 0xc473400c, 0x8303735e,
-	0x90b037f7, 0xce060aca, 0x28fdfa0f, 0x2359dfb2, 0xdd1be5b5, 0x09ecf2da,
-	0x7e6332da, 0x9a4fd782, 0x1a4eca9b, 0x04fefdc2, 0x0311d6a6, 0x5802b72e,
-	0x5eed7eb1, 0x0464e04b, 0x923beb1e, 0xaec6e535, 0x88c9c0ac, 0x1ff16a71,
-	0x135ff059, 0x589d775f, 0xdf4607f7, 0x5bc00ead, 0x71190b3d, 0x46c140dd,
-	0xacc658ef, 0x7c45e616, 0xf16fd81d, 0xcfe812b0, 0x00b76e66, 0xabbb1b7c,
-	0xdef02595, 0x30ef876a, 0xe196273f, 0xfaf03569, 0x0e88058c, 0x39da8fe0,
-	0x5bed99bd, 0xb713e415, 0xcdfedaab, 0xff00dde7, 0x4f0293dd, 0x24ac3d95,
-	0x0ea3ac46, 0x5e1e91d6, 0x07eb39c7, 0x582f8865, 0xa5ec6fcf, 0xa6461748,
-	0xf3d78524, 0x5cb5e1ad, 0x5dc6af0b, 0x1837a236, 0x1844bde7, 0xcea761a7,
-	0xceb2846f, 0x7e4463dc, 0x3ce917b9, 0x1c72de06, 0x6f3c4c4a, 0xe0c73c43,
-	0xfcaceda7, 0x1cc7e43e, 0xc7181fe4, 0x6527eeb6, 0x8f818b27, 0xfa1737aa,
-	0x054dbea0, 0x547186fe, 0x08a9bff8, 0x6d3bd9c8, 0xe9d03255, 0xc3e73b29,
-	0x7a2e890d, 0x0abc50ee, 0xe75d35e2, 0xd5fa47c9, 0xcc43b827, 0x66a3f1c1,
-	0xcb601942, 0xf962c1ae, 0xefe81ebd, 0xcb1b9821, 0xf0098416, 0xcbc2c878,
-	0xefca392f, 0x6ee308dd, 0x0de5e64a, 0xd5b9bd3f, 0x16ca093f, 0xe5439e59,
-	0x416d0c87, 0xffdde03d, 0x44f5c982, 0x28f7b53e, 0x32305e58, 0x4d4c04f0,
-	0x2365843f, 0x4226a65e, 0xf4b720e7, 0x9b769a2f, 0xeed05ea0, 0xa78427fb,
-	0xfb39ff5c, 0x26363cf1, 0x4d7e7f66, 0xacdf797f, 0x53bf183f, 0xfbf87577,
-	0x419dc4d4, 0xc2e76f3d, 0xe7a72c76, 0x9ff43f03, 0x6d89a2fe, 0x0623e285,
-	0xda179b76, 0x632c5dd5, 0xd43908c1, 0xb679f023, 0x5b7241d9, 0xf943afbe,
-	0xa9f9063d, 0x7d70e487, 0xfe46aa47, 0x7f5cb94a, 0x7f4d5af1, 0xc27c8e39,
-	0x43dabd57, 0xe2feadf2, 0x121efa64, 0x736cf4f2, 0xf889e926, 0xc8d20ce3,
-	0x1338f0f5, 0x72f8b059, 0xefa24ce3, 0xcbe61c72, 0x06bdb922, 0xa4240ce7,
-	0x87bc8237, 0x750c2e71, 0x465f2525, 0x0276d99f, 0x67ac4591, 0x63341a9b,
-	0x07dcdbff, 0xfc18be1c, 0xb844e520, 0x1edb51bd, 0x811b23f4, 0x4863edf4,
-	0x7aacffb7, 0xd4fa91cc, 0x5038f066, 0x8af6a86f, 0x34372e23, 0x86647e4d,
-	0x5169280a, 0xd97f3d39, 0xd1e881b6, 0x411f706e, 0x3aeddafc, 0xafbe1f97,
-	0x483ce9b7, 0x730e2d27, 0x51bdf100, 0x7281c1b9, 0x076bf643, 0xb8f38f31,
-	0x7a421b60, 0xd57ade3d, 0x0f54898b, 0xa9199266, 0xc6f7ff1f, 0x0f17c583,
-	0x31bd8f1c, 0xfa0b88f1, 0x6e744b57, 0x910be00b, 0x1d0471fa, 0xdf63f744,
-	0x779cc6a9, 0xff093d74, 0x8436f8b8, 0xe7fe1112, 0x8119ba6d, 0x4d2ef318,
-	0x9e9bbe56, 0xdf25145a, 0x3c3b7f93, 0xd095ed88, 0x49f20a0f, 0xa32696fe,
-	0x90bc2dfc, 0x3922e958, 0x73b5ee9f, 0xb6e385b1, 0x7d9a8ed8, 0xed988fa4,
-	0x3ebfd913, 0xb849fd3e, 0x64aade18, 0x04601f88, 0x4ae37a86, 0x412bb070,
-	0x1597e22f, 0xd3e50caa, 0xa76f3a40, 0x77d7f4f9, 0xeb11e743, 0x0edd516f,
-	0x75fd6ba4, 0x99ca331e, 0xe6398ef5, 0xaa379410, 0x20f9d9ae, 0x02defa87,
-	0xb7d6127b, 0x1cc8ad29, 0xc15a8f8b, 0x2df9c46e, 0xd669d64d, 0x1d669f23,
-	0xf7e8dfe7, 0x9eb9925b, 0xb13fdd68, 0x9f1253c7, 0x79d2407e, 0xcb9b8f51,
-	0x5856c754, 0xe7c0de9f, 0x0763896b, 0xc1e37eca, 0x0b7ecb6b, 0xa87569c9,
-	0x44f68039, 0x549b78f4, 0xbe078f77, 0xf8f9826f, 0xc7c39cb1, 0x3aa254df,
-	0x16d74376, 0x47330257, 0x4b3837d4, 0x6c17fe08, 0xdf0f4c69, 0xc63d2137,
-	0xd3849798, 0x68efe4bc, 0xe8a2f93f, 0xc3b7f732, 0x5d0d10d9, 0xcba2c6b6,
-	0x4b37a879, 0x3999fcf9, 0x9343fe72, 0x8c7c8ebe, 0x49b29ba6, 0x977c83cc,
-	0x5876cf01, 0x66caa76f, 0x807d43ec, 0x9844d6b6, 0xe636cddf, 0x393e9900,
-	0x32677cb5, 0xe7acb7ac, 0x3f219180, 0x1d693a74, 0xf47da275, 0x8e14a6b8,
-	0x838a533f, 0x3dc7499e, 0xf8014f4f, 0xb824f676, 0x99d4f814, 0x0630fa02,
-	0xbc088f7c, 0x9fc6d633, 0xf21c686a, 0xb65fac8f, 0xc3767988, 0x6b0250f3,
-	0xb2bd8335, 0xc607c84f, 0x154fe7ee, 0x99c61718, 0xdde8cafd, 0xf58a2f64,
-	0x80b5021f, 0x43d3d3f5, 0x77fd14e3, 0x585edbc0, 0xeade047d, 0xdbc221cd,
-	0x6bdf46db, 0xe3c69f08, 0x772c74a1, 0x87933d1e, 0x70b670f8, 0x25efb5fb,
-	0x6ee9006b, 0xd3d67e20, 0x0e2eeafc, 0x81e2fe62, 0x8353ab78, 0x2eeb5fa4,
-	0x5877d1e6, 0x129cdfb7, 0x6c1b3efe, 0x2eb00986, 0x4270e666, 0x47c2c4f8,
-	0x896be0bb, 0xa3eb500f, 0x081f02ed, 0x3ec48fa7, 0x4eef1fa7, 0x780666e3,
-	0xefe66b3f, 0xdf246799, 0xfe7d0987, 0x005e4251, 0x0d1f33f7, 0x7a46ce07,
-	0x91e95d50, 0xe2cea77a, 0xac3e6fb9, 0x67abbd9b, 0x5963c04f, 0xed15ada5,
-	0x4f2665ab, 0xcb5dda12, 0xeb2bd3de, 0xc48409f3, 0x3c042b07, 0x5df732cf,
-	0x36ff3f88, 0xc209e38b, 0x97ff769f, 0xf8bca3bf, 0xa2bf681d, 0x9346ef4b,
-	0xcda56971, 0xf596fd8f, 0x876d3c54, 0xad5b2bf7, 0x2efd062e, 0x04fee29b,
-	0xf765bded, 0xf21b5c59, 0xa438bf71, 0x5dfa0b3c, 0x03be60fb, 0x9d7581e5,
-	0x06ecd337, 0xeb7ee093, 0x6de02b4c, 0x8964b293, 0x7dac0852, 0x1516ca7f,
-	0x57feacf0, 0x281667e5, 0xc17f755f, 0x8c75f316, 0x1cb282bd, 0xd0ff59ed,
-	0xfedf6899, 0xf646a712, 0x7f6fb72e, 0xca274479, 0x82a65bc5, 0xece5180a,
-	0xce60d9d4, 0xb78a532b, 0xf4fc6198, 0x0ea14f14, 0x32935bc6, 0xb7f62661,
-	0x7fb1bef4, 0x77df09dd, 0xa99acca4, 0x44de13e6, 0xcaccef7b, 0x926ed0a1,
-	0x54b3cf2c, 0x56697f42, 0x27a7b616, 0x090fbf00, 0x77f68f8f, 0xbdfdbf67,
-	0x1cd4e660, 0x53454bc0, 0xbffd0aa5, 0x96db729e, 0x36315731, 0x877281fe,
-	0x983fc607, 0x15a664b2, 0x9469dff0, 0xf16d97f5, 0xcc9d58c0, 0xbe0186f7,
-	0xbafef1ff, 0x9fa86699, 0x742dea96, 0xcd53fac0, 0x91996ff7, 0x65f81dfb,
-	0x4fbd12a4, 0x1271482c, 0x90461cdf, 0x33ebade6, 0xf82afd72, 0x71d3873d,
-	0x9424797f, 0x4ce511ed, 0x10dcee5e, 0x4e9c7e5b, 0x33b972e5, 0x8f77f621,
-	0xef004b90, 0xb3e90ea0, 0x96181acb, 0xc027961f, 0xc409e64f, 0x3cb9db5f,
-	0x639abe01, 0xd98e3e27, 0x5fe537df, 0xd3f53b80, 0xe8ac7aa9, 0x0d7290bf,
-	0x71c56666, 0x69764cbe, 0xcf5975e4, 0xbfb79252, 0xeb7c154a, 0x5671f0e2,
-	0x330ae56a, 0xb8470cf7, 0xc58b76c8, 0x4b47f33a, 0x88d052ff, 0xe2d6b9fc,
-	0xacf9c0c9, 0xc19e57dd, 0xd787632e, 0xf8d72c5d, 0x98ebc24b, 0xf407ef4a,
-	0x44b9fd0b, 0x5f31eeff, 0x57c95e07, 0x7d1a5780, 0xc33ad2bf, 0x3bfd69fd,
-	0x7ee3fb03, 0xc57a019e, 0x1b9e7b18, 0x415eb853, 0xe422ebf8, 0x5f214ada,
-	0x3d916a41, 0xabc5fe7e, 0x8fcd6f76, 0xf503771c, 0x7a7df80f, 0x412fee0a,
-	0x2b1ca2be, 0xb0b33d53, 0x8a4f597e, 0xa079ed03, 0xde828db7, 0x8937a454,
-	0xa694cee7, 0x76ef5a72, 0x863bb1c5, 0x3913f81d, 0x83c536af, 0x22c649f6,
-	0xc4497e9f, 0x87fca4fc, 0xff453bfe, 0x1f9e9c25, 0xc5e7a7ed, 0x2fc23fc8,
-	0xdf40dcc4, 0x5fce0763, 0x08ce36c1, 0x2582f5fd, 0x7091f380, 0x2ff4b6fb,
-	0xb8ba87ed, 0xda912a7a, 0x260f1c65, 0x219ea0ba, 0xb9f9c5c5, 0x6bc4e3e3,
-	0xe9755f51, 0xebe2e299, 0x2651b946, 0xe7bfa4e5, 0x764a8548, 0xbb2e584c,
-	0x72919ec8, 0x87366833, 0xbdbfdfeb, 0x9446c667, 0x2fbe26ab, 0x1483d34f,
-	0xe3cf0a2f, 0x2fae14e5, 0x2798f827, 0x24781d96, 0x08e52ed9, 0x75e1e3ad,
-	0x5863ec95, 0xd7e85d9f, 0xf93f2109, 0x664c9eb3, 0xf0e13ec2, 0xb67bfa90,
-	0xdcaff429, 0x47a5a64f, 0xa53b0659, 0xee105741, 0x89cfbf1f, 0x8263fba0,
-	0xf3f1a20e, 0xc013e55d, 0x48708fc1, 0xc872e14d, 0xed056509, 0x17f4150b,
-	0xb55cffc0, 0x3f35bdcd, 0x2e36de62, 0x1d7a9d8f, 0xe0576397, 0xfe54b48b,
-	0x3b25efbd, 0x1e1873f1, 0x2ff98edc, 0x1d76f701, 0xc17dc1ab, 0x09f01d21,
-	0xaf8da2d2, 0x598bfcf3, 0x29e7efd4, 0xeffeb93a, 0x1bb72e45, 0xd7ce3c61,
-	0xbfd63f64, 0x3b5da83c, 0xdcdfde7f, 0x658f4e54, 0x68853dc7, 0xdaf30cc7,
-	0x285fb8dc, 0xc07399eb, 0xdde1e500, 0x4b6b038a, 0xc1de1f3a, 0x4ba814f9,
-	0x67ade5c0, 0xa5b5fb22, 0xbefa3a72, 0x38fc31d6, 0xcbc457a7, 0xcd3e08e2,
-	0x7871b54d, 0x084cfac1, 0x472b554f, 0x9bfbf3e5, 0x0180f787, 0xf0075bd6,
-	0xe12db140, 0x64b1d9d6, 0xf8f90583, 0x1f237338, 0xa258ef9f, 0xdd788b1b,
-	0xebbec8c9, 0xf00f0f97, 0x147b4875, 0xe903b2e8, 0x5cd4eaf2, 0x71d86f1a,
-	0x7c0c758f, 0x1376861f, 0xec3b95fa, 0x4c57dc01, 0x4dcdf54e, 0xedce7845,
-	0x4a2064ab, 0xeb4dac1a, 0xfbef112d, 0x7d4177eb, 0x7e9f63a2, 0x36f3ce2c,
-	0xc2bab6c6, 0xfaa981eb, 0x6f5a1fd1, 0xa02d3e04, 0xd6e11072, 0xfbf5e469,
-	0xcf8a3316, 0x8cfbe834, 0xf7f41df8, 0xa3cfa22c, 0x2fc414ba, 0x6ed09bee,
-	0x737bd3ae, 0x67d7dc14, 0x07a8dc98, 0xf4421f60, 0x54c2c87e, 0x26fff40b,
-	0x574e513c, 0x8fd8efe9, 0x502aaaf0, 0xae242ddc, 0x60dc85da, 0xcd37dc41,
-	0x7a25629e, 0x39dd5f64, 0xbff51ab4, 0xfa09e395, 0xcc7e8b31, 0xff30a2e6,
-	0x2aef3afd, 0xfd48ffda, 0xa8514876, 0x8dd7439f, 0xb112ddde, 0x50fec22f,
-	0xaa521ffe, 0xfa40ee73, 0xb23afb17, 0x7ac2d30f, 0x2295ed17, 0xfdde245b,
-	0x3ca17e62, 0x7b48a3a4, 0x7ed3ed14, 0xb1dfd67b, 0xd9c83a65, 0x823a33f1,
-	0xd152073a, 0x01ff33f3, 0xf60551d6, 0x70e005ac, 0x33972a5b, 0xfafdf287,
-	0x30df9c44, 0x3abc3f58, 0xd31be09c, 0x938f0b64, 0xe90ffc2e, 0x482fee46,
-	0xbfcfe04f, 0xe73b72a7, 0x1e5c6927, 0x978d21fe, 0xfb6313d3, 0xf510be2b,
-	0x1f971354, 0xfcb9cb5b, 0x41b7ae8f, 0xedadfbf4, 0x668a31de, 0xef760f7f,
-	0xf76e5486, 0x885fb91a, 0x0a9613c7, 0x873b06fa, 0xabb614f0, 0xda503c78,
-	0xccf45fa1, 0xf372f2a3, 0xbfe8d97b, 0xe69fedbf, 0xb6f487dd, 0xf27a37f2,
-	0xf1149c57, 0xbec99582, 0xbfdc64f4, 0xabf6c427, 0x75d6273c, 0x1f9199ba,
-	0x1b8c53f8, 0x893dec82, 0xaf284371, 0x34e0f9da, 0x2cd5bfe4, 0xe5e0fe40,
-	0x5c51373b, 0x61407970, 0x69f7052e, 0x1627ee5e, 0x47bd58f8, 0xdf4bf1af,
-	0x931936ae, 0x77e984c7, 0x6e369b45, 0x58abb358, 0xf6f6fe53, 0x440b2569,
-	0xfcb0a1c8, 0xa3ef4699, 0x1ef495fb, 0xd47ea76d, 0xc3f8d2ec, 0x461cee97,
-	0x97f597eb, 0x77ad3731, 0x66816b59, 0xf395acde, 0x49f9bc49, 0xd4bb45ba,
-	0x469e731f, 0x008ffbcd, 0xff08fefe, 0x4353d2ff, 0xa92d1e69, 0xba40ffbe,
-	0xcac3cf09, 0xdabf1afc, 0xb027c724, 0x7ee16656, 0xff23a049, 0x5081ece5,
-	0x6fffa72a, 0x71d1f70f, 0xfee305f6, 0xca0beebf, 0xcc397126, 0x0c3614da,
-	0x6aa7e31e, 0xa0bfb4ed, 0xa7c52bbe, 0x616beb95, 0xa45f2d47, 0xd45177ad,
-	0x5dea28bb, 0x6912bfc9, 0x2805299f, 0x0d7f78d7, 0xcff38f82, 0xa0ba351c,
-	0x6e34f8de, 0x3d3916c7, 0x6cef5097, 0x438e24b3, 0x4b36ca7f, 0x52f5005e,
-	0x38bafaff, 0x48336d1d, 0x033b8a3f, 0x5ffed6e1, 0x88a8b677, 0x0fb07dc7,
-	0xfe587900, 0x8a1641e8, 0xae375390, 0x01cb3c53, 0xef2176de, 0x7d7cdcea,
-	0x71a0ee75, 0x5d93f428, 0xd395e7c7, 0x23515fb1, 0x08d4e5da, 0x419a5f7f,
-	0xc1cccfb3, 0x8d254e32, 0x9a9ce3cb, 0xea1432a0, 0xa3daef65, 0x875fd8a8,
-	0xbb337a42, 0x41130009, 0xdc25d957, 0xa4b1b9be, 0x2636595d, 0x5d56870c,
-	0xe00718f5, 0xeadd35a7, 0x8f737d46, 0x0d2437d3, 0x182279e7, 0xf8fcedc4,
-	0xda2a3d13, 0x7a753fef, 0x619cd20a, 0x8ef4b838, 0xd6a7d46c, 0x6d9e7c13,
-	0xae63fbfd, 0x4da22867, 0xdcddabfe, 0x23b3d19e, 0xa487db8c, 0x8c37d2af,
-	0xe727bd24, 0xf4229e97, 0x3df33a45, 0xadfaa367, 0x68c9f08c, 0x861be93d,
-	0x2cf6e6ef, 0x815577c7, 0xafbe0f77, 0xa8aab8ca, 0x6c17de05, 0xa14baa0b,
-	0x62bbcbdd, 0x85cb83fb, 0x4c75813e, 0x75c9f5c2, 0xc82e495c, 0x7e38867a,
-	0xd60fc90a, 0x1ff7b119, 0x2f7d2230, 0x216d347f, 0xa36eb7ce, 0x30949991,
-	0xf4ea7ffc, 0x64f9c6ce, 0x082bb477, 0x93dfe91b, 0x1dff4ae3, 0xfcfe477e,
-	0x96f928c8, 0xfe5c5fd3, 0x2cf7a75f, 0x1b67948f, 0x6927848d, 0xc7e7873f,
-	0x69d5fded, 0xeabecf5c, 0xf9c12ef4, 0x276d7434, 0x3daacf7f, 0xf9631a1f,
-	0xe2f9a3ab, 0x6a54704a, 0x6ea0bef8, 0xeb8039be, 0x25547f2f, 0x68dda83a,
-	0xdd5938a4, 0x9fb8fb33, 0x46e61ee7, 0xb1d75139, 0xe30e594f, 0x4fb33ed6,
-	0xd7011159, 0x05017541, 0x2ec233e7, 0xafcb90f9, 0x3f47ba68, 0x872dda32,
-	0x9c4e5c2d, 0x15f9b72d, 0x8359eb80, 0x9deb0eaf, 0xfdbab2cd, 0xbc3c61f9,
-	0x11fa6fb9, 0x3fb037cc, 0xb3e20a67, 0xd33bb755, 0x475af50c, 0x5f48dd19,
-	0x36fa753f, 0x54525c23, 0x4fb6276f, 0xd7bbb34e, 0x89975b43, 0xfbbca115,
-	0x1f1870ba, 0xefe32745, 0x85d3fce1, 0x91db8872, 0x813fc845, 0xa7b4bb34,
-	0x361dae48, 0xc73c75f0, 0x9eff7cf8, 0xe89079ea, 0x8d0a48f8, 0x54175d9b,
-	0x7f9d9fd0, 0x6b9239e6, 0x9d30ffb2, 0xe4891e79, 0xb3cf2bdf, 0x56f488c3,
-	0xf950e42b, 0x8f947ba3, 0x4bfde623, 0x6e91f430, 0xba019fb2, 0xfdf7d1b4,
-	0x3ea8d333, 0xbdf0b933, 0xe16aed42, 0x79088afb, 0x4311d723, 0xf5c3ecee,
-	0x1cf44ed8, 0xc82772e4, 0xbe628dfd, 0x157cf8d1, 0x9a7c1fe5, 0xde99ea06,
-	0x3123fd1b, 0x48787a2e, 0xe527f502, 0xbedf3440, 0xe51ce82a, 0xfe46cea5,
-	0xe52bb25a, 0x22bd64fc, 0x34fec567, 0xc10f4382, 0x4a977ea1, 0x7a32a9eb,
-	0xc111de87, 0xfd16bf0f, 0x03f9b81d, 0x07fdca23, 0xa25dfdfe, 0x8536fac7,
-	0xedacf1e2, 0xd43ce35d, 0xf4a7fe47, 0xe2ce6768, 0xf1db0126, 0xa784bbc2,
-	0x2e5c9d59, 0x53ee77d7, 0x74c2d997, 0xc0e67f9a, 0xf56748ad, 0xfb86261d,
-	0xdfbfa022, 0xe9a27c20, 0xca47c254, 0xb4f878dd, 0x9472e0ce, 0x47e48df9,
-	0x3e54fd85, 0xdca429fa, 0x4eaa7bfe, 0xfbf809f8, 0x1cbc690b, 0xa7df1fa6,
-	0xdcb08f08, 0xe45f10b5, 0x603a299f, 0x5bb87dc6, 0x5a7f3f21, 0xe4678725,
-	0xc6c7aabc, 0x54ce9b97, 0x50d437a1, 0x587b1cde, 0x7fcbf7be, 0x810bfed1,
-	0xe41f786f, 0xd410d9ef, 0xd1fe72f3, 0x7277cbf8, 0xce831b7d, 0x11d71bfe,
-	0x3da4dfad, 0xc9e6e920, 0x8f46aa5d, 0xea469dd8, 0x731b0ecf, 0x728ec79c,
-	0x61d8cf1e, 0xc76cfae0, 0xe500737a, 0x780b9bc9, 0xa17d995e, 0x43cf8831,
-	0xf875a5ba, 0x1f3650fd, 0x5ba755bf, 0x0dd6e583, 0x7842d636, 0x4b3a24f5,
-	0x19127e91, 0x1e5c8f97, 0x973cf03e, 0x5b7e7567, 0xeb3fc180, 0x5397737c,
-	0xe2cd39dc, 0xf333b8c6, 0xb3ce341d, 0xd72ba40f, 0x2e8dfb73, 0x83ab3f78,
-	0x03c49ff3, 0x2fa253c8, 0xae120fc9, 0xb8727861, 0xf8927e4b, 0x67f4bbf8,
-	0xa77cbd03, 0xda3daabc, 0x46dbdc78, 0xbe4ed5df, 0x706c3acf, 0xc7869fa1,
-	0x6fd1e217, 0xb3b7baed, 0xb51d824f, 0x7a2df33a, 0xfd85be4a, 0x27bf86ac,
-	0x3817bc09, 0x74afbeb9, 0x2da9ba72, 0xacbe20e9, 0xfc44d93d, 0xe5c19b6c,
-	0x5684ed9a, 0xcff6331e, 0xa8dbbd62, 0x63b5955d, 0x5477e61a, 0x7038ae3d,
-	0x6e4f1fbf, 0xfcf0aede, 0xbd774fb8, 0x72f98891, 0xf2b02bec, 0xe1629e31,
-	0xe4eb9deb, 0x5eece272, 0x7bd13800, 0xf672f193, 0x63fa95fb, 0xc20a63c1,
-	0xfac056b3, 0x139533ec, 0xec7e84ff, 0x61ee49bd, 0x9ecfe4b0, 0x3feee9b9,
-	0xeecfbcc1, 0xf746e299, 0x978b5a65, 0x69cfa7e8, 0x037ee371, 0xf40cf7c4,
-	0x78efae17, 0x685af123, 0xabe9fa77, 0xd76e508b, 0x799e798a, 0xe10ebf5e,
-	0x7fc9e1b2, 0x6bdf8c9b, 0x09aa4a03, 0xf8fbd9c7, 0xbe63677f, 0xf2469eea,
-	0xfd3cb517, 0x17f311ba, 0xfe768174, 0x03926f7e, 0xf9fe9deb, 0xef08c9f6,
-	0xfa168e96, 0xede7e67e, 0xe4f03e54, 0x77f6bdbf, 0x1378e3f4, 0xccef58dd,
-	0x2f09fbf3, 0xf2953e75, 0xf5d1e2db, 0xb9fb7d8e, 0x8f3d44bc, 0xcb9f307c,
-	0x92d74931, 0x793f4f7e, 0xbd48c4db, 0x0ab7df21, 0x026b4e7f, 0x099f23d7,
-	0xe0adadfe, 0x9ecfcef1, 0xfda7ccb5, 0x1c343181, 0x6375c5f7, 0x2ddc5d38,
-	0x71d751e0, 0x46c1a187, 0xdf9fa9ed, 0x73e3df02, 0x27e7d02c, 0x64852923,
-	0xd7ca25cf, 0x0faa57f9, 0xbfa026f5, 0x1f45e6e7, 0xeb1f382a, 0x2d432698,
-	0xfe69f3cd, 0xf91d561d, 0x6c6d6cbd, 0x38bffb3f, 0xe02ec26d, 0x59dd907c,
-	0x3922e39d, 0x8b0f7260, 0x6bb387b0, 0x27182d7c, 0xcfad7ebe, 0xbe3c07ad,
-	0xb4e8ea7c, 0x727e5041, 0xf84c52a4, 0xcf5c2bd7, 0x4e346df9, 0x81c1fa3d,
-	0x3e0b768f, 0xf5307749, 0xdc03921a, 0x32a5501f, 0xaa7e46d5, 0xf513923e,
-	0xee0f42ad, 0x736e7e11, 0x764dde5f, 0x26bb676a, 0xed061f62, 0xf72a366c,
-	0xf310fde5, 0xe7f8674a, 0x1971de93, 0xa467be69, 0xf27e603c, 0x8b7e4a7b,
-	0xbca11bf6, 0x57d1fcc1, 0x285de59d, 0x3d33e51f, 0xefe4bf8e, 0x74b8fbe2,
-	0x15ca174f, 0xa35537b6, 0x95c9e20f, 0xe79f3703, 0x0f95fb7a, 0x901b0e89,
-	0xdf7c710e, 0x5ede8d49, 0xe815c24e, 0x890fa5f0, 0x7177970e, 0x55d0daf9,
-	0xd4fdc46e, 0x69d7e10e, 0x7484f410, 0xbfe8fb84, 0x9c69933a, 0xe1a1c986,
-	0x0bcea728, 0x12ff3bba, 0x3a43b7a7, 0x0e01f91d, 0xdedd1eed, 0x8fd40ca2,
-	0xf0978d4a, 0xe6f800dd, 0xa3daf376, 0xd7d56768, 0x6bf23730, 0x07e0a743,
-	0xbe117bb0, 0xcbd55d0d, 0x6941bfb1, 0x0ddfc933, 0x41b4c976, 0x63a86e50,
-	0xd96fc8a5, 0x425e2abb, 0x7c5d60ba, 0x035d9e3f, 0x4dd22cf6, 0x9f5bbd5a,
-	0xdb8f7a8f, 0x2c8fd7bd, 0x723bf6a3, 0xf2e7145d, 0xf38a3157, 0x19fb40ef,
-	0x68d65df5, 0x36fb3f6e, 0x5cc5dd92, 0x6537e409, 0xd60d753e, 0x622ff06f,
-	0xcd11d794, 0xb4292fc7, 0x5808680f, 0x56681f29, 0x1a7fb717, 0x9f1f38ba,
-	0x4f91f093, 0xe4adcf43, 0xc4c17f8f, 0xd0fe11fc, 0xce9a5f37, 0x268becf5,
-	0x359fb3d2, 0xb0c7d87b, 0xbc85b7a0, 0x6dac7097, 0xdd21d7cb, 0x09937632,
-	0xcc4cb1e7, 0xf5c0cda3, 0x03d0b246, 0x3cf8db05, 0x77e174d4, 0xa789d74c,
-	0xe2e79b51, 0xe17f93f0, 0xc88f189c, 0x39e85d22, 0x797eba18, 0xeea4f890,
-	0x9a5fde19, 0x677853c9, 0xfb4abd04, 0x0b1e9a28, 0xbbd9b8c4, 0x4c282a0e,
-	0xd1cd77b2, 0x35f5f9f0, 0xeb08d82c, 0x2e977ebc, 0xd91c6538, 0x9e490b4d,
-	0x58b237af, 0xd2232af9, 0x9556fdb9, 0xbf442dea, 0x36cdd576, 0xb93fa477,
-	0xb3a3c12a, 0x24571da0, 0x12ded8fd, 0x4a9d1b8c, 0x6f11bbb7, 0xd25dd2e3,
-	0x5bd8d30e, 0xdcdff703, 0xcda1bc0e, 0x1ff70e3f, 0xf309f581, 0xda09ae29,
-	0x0edcfc8d, 0xf7fb8f68, 0x9cfed7dd, 0xb85bdfef, 0x070402ff, 0x6f5499c9,
-	0x9d8ffa09, 0x5cb5de05, 0xb1ddd93f, 0x93aaf3d6, 0xcdc0e7af, 0x3ee216b7,
-	0x8dae61b1, 0x5781e1f8, 0xde9ca594, 0xbee21140, 0x83f9c7da, 0xe13c7f01,
-	0x3b247a22, 0x1bc9a1aa, 0x9c8f4d88, 0xaec01a5f, 0xe81b3b42, 0x93b70d71,
-	0x13f38c6d, 0xbfb94ba7, 0x6915b947, 0x8d3e4acf, 0xbf497be6, 0x35ff7cfd,
-	0x81bcfdf9, 0x8079e3f3, 0x3f7bd203, 0xe9ccbf9d, 0xe07aeb7c, 0x15bef847,
-	0x4225b1f8, 0x7fef47fe, 0x1fb89e70, 0x1ef6f290, 0x3a5177a7, 0x6fdda1ca,
-	0xab50c66d, 0x2f0d8f94, 0x397e196f, 0x958ccbbb, 0xf0335fa1, 0x60fd246b,
-	0x445ed68c, 0x09ea3f4f, 0xfed8baeb, 0x6dd2bb8f, 0x3f3fcddf, 0xaee52f30,
-	0x7981d2f4, 0x73a8e929, 0xadbb6f10, 0xa58fb401, 0x3e7a291f, 0x499f044b,
-	0x03fdca7c, 0xfeb021c6, 0x37ef82fd, 0x888f7a89, 0x84bec467, 0xf3a5c1f8,
-	0xf679487d, 0x6c91f471, 0xb5f97df7, 0x2f5238e4, 0x8c8dd346, 0xaa7ae0a3,
-	0xd7afc4c7, 0xcfec5fb6, 0x29f8e8a2, 0x800b5fc1, 0x6dde7037, 0xc417e086,
-	0x19d8778f, 0x99f813e5, 0x71e31527, 0x7ce08daf, 0x386fb234, 0xfa66b7b6,
-	0x92ba44be, 0x8f7c5d7e, 0x115aaa71, 0x6bddacbf, 0x7f9e4408, 0xd18337b9,
-	0xb376bd38, 0x91fc0f5f, 0x87dbe99b, 0xcc15fded, 0xf33d441d, 0x2b8a168f,
-	0x8a5b8181, 0x8591a6f2, 0xefce1112, 0x205efb25, 0x0cf7d5fa, 0x39e3bf47,
-	0xdf0e3425, 0xdafe109f, 0xfb5fc213, 0xcf7bd77e, 0x17ad02be, 0xf16e72bf,
-	0x5ece918f, 0x7d21e4b4, 0xe7f4b09c, 0xdda125bf, 0x92b9817d, 0x690e772e,
-	0x55ef5991, 0x2767fc23, 0x7ffdb1ec, 0x373c0b6f, 0x532b788a, 0xb7c3ed19,
-	0x19f97067, 0xe3c4bf3e, 0xb4ebefad, 0x1cf937fe, 0xdfe1c193, 0x501ce719,
-	0xd7df0661, 0xfce10e74, 0x50aed7d8, 0xdd66afbc, 0x41eb3ffa, 0xb5acd42e,
-	0x9f09e907, 0x71ab8ed1, 0x283a83f8, 0xb970309f, 0xcd737f04, 0x07fd6165,
-	0xc849d4f5, 0xc5077e33, 0xfd0a96bf, 0xcde9acb5, 0xa15fa1bf, 0x49e66546,
-	0xf2c71845, 0x9f041e1e, 0x4f2db53e, 0xf2bff144, 0xa3a67747, 0xd458ca7e,
-	0xa6c1f226, 0x55fed03a, 0x2fe8373c, 0x6f672f59, 0x132764a9, 0x1ede001d,
-	0x22f6f0cc, 0xe24a2f1f, 0x7745c17e, 0x08fe035a, 0xf057b879, 0x7cfd3461,
-	0xcdbce710, 0x01151997, 0xaa616fec, 0xefd46ff7, 0x7234e79d, 0xfa12bced,
-	0x5f4823c5, 0x4fddd877, 0x22f2eef0, 0x05d263f3, 0x0e316bfc, 0xb7b1a204,
-	0xbaf867b0, 0xbee3a47c, 0x5fa1dfbc, 0xf0e4dbab, 0x91bbf0bb, 0xf176cbbe,
-	0xe3f141e2, 0xd2232e40, 0x8545c347, 0xf76961e8, 0xae51c79b, 0xa221a837,
-	0x1b66a593, 0xa2e1b1e1, 0xd5a9e9ca, 0xdb243670, 0xa4d7ee03, 0x6032d27a,
-	0x277bfe9e, 0x093c5325, 0x17c389f8, 0xe39c452a, 0x37c332f8, 0xf7e00328,
-	0x36f13590, 0x305d7fdc, 0x8f3092bb, 0xf408d1ad, 0xe7753570, 0x43d84735,
-	0xa5aec72c, 0xfeb7ee83, 0x6e5af386, 0xaf5119f6, 0xd134f0af, 0x4945b179,
-	0x98c752c1, 0xd24fbc48, 0xf5fd1a5f, 0xc8497ef1, 0x3c8df797, 0x9d20646f,
-	0xcf6c3c73, 0x39b2f510, 0xc79fbcbf, 0xe7c39e6a, 0xbb427828, 0x728887f7,
-	0x170f2891, 0x7979d2f5, 0xf797e09a, 0xd17af1c7, 0xe3152ce3, 0x99e1997c,
-	0x7682708c, 0xc7d22341, 0x673a166b, 0xfe404ac4, 0x935bbca1, 0xc82c764b,
-	0x770869b9, 0x4c982718, 0x67a44cf5, 0x41c81358, 0xa96f67c0, 0xb5b3e08b,
-	0xe305e81c, 0x289aaf41, 0x2bf1241e, 0xcf8d1af1, 0x77ca1985, 0x181f4fcb,
-	0x51985ebf, 0xcd7e303a, 0x17c250d8, 0xf38c4bd1, 0xf5f0f11f, 0x03c73b6b,
-	0x0cf2ebf0, 0xb1c183d2, 0x49b37c91, 0xb5ca51c0, 0x78b413f7, 0xe39d3cfd,
-	0xbbd45ea1, 0xda1f7684, 0xe23eeed1, 0x7853f7bf, 0xae02b4fd, 0xfe5da497,
-	0x5f2e024f, 0x529f6ba6, 0xd1fb44cf, 0xe2f214bf, 0x47ee74cb, 0x8ddebc07,
-	0x09fa95f3, 0x19304ce4, 0xebd178f8, 0x6c339226, 0xd5e51f63, 0x83ffbd40,
-	0xea645af0, 0xf41535bb, 0xdec10fca, 0xbb511631, 0x0647284b, 0x48c7efec,
-	0xd433b0ba, 0x0e19addb, 0xf4941f6e, 0x48d7b8f1, 0x0ca5aebe, 0x657287e4,
-	0x210c63fc, 0x6bf0e40b, 0xc142bf22, 0x6214aebc, 0x07f61767, 0x8c97ff70,
-	0xa3dc30d2, 0xe8213bc7, 0x450cd1e0, 0xb215bc25, 0xaddbc442, 0x5f6e7eef,
-	0x139e5d0c, 0x4d9365e7, 0xe7ec76be, 0x916fddec, 0x18c27e9d, 0x8b66de1c,
-	0x7c18ddf1, 0xfc2521ec, 0xf4a7b6fd, 0x98d5e37e, 0xc1f67e7f, 0x4bdd619b,
-	0x1c6ef47b, 0x5f3de972, 0xed1e33bc, 0xc5031eec, 0x6fdf406b, 0x4dde7153,
-	0xa13caedc, 0x67c1d2d3, 0x3df76977, 0x907a0baf, 0xdca572e7, 0x157cfa91,
-	0x93797373, 0xcb1bb890, 0x3b71dd1f, 0xce5dcb9d, 0x003d87bc, 0x666bd3f7,
-	0x3b7c5d92, 0xcf5e51f3, 0x39ed56b2, 0xda6d15db, 0x073bedf2, 0x3925c39c,
-	0xfd102abc, 0x2ba5f85e, 0xf3fbeb63, 0x333f2e82, 0x7afdf88a, 0xfdf8cc53,
-	0x09fc85ef, 0xb4fbd9c7, 0x2f57fbf1, 0x8c6fbf1f, 0xed87df8a, 0x3df8e888,
-	0x6113f7ef, 0x91bf606f, 0x2acffc71, 0xa3e3af62, 0x58b7690c, 0x9f19f935,
-	0x125bb00c, 0x45e37be9, 0xd8f99c4b, 0x2b67fde8, 0xd7d38f63, 0x5f368e3f,
-	0xe79edc20, 0xb5fdc809, 0x8bc693a4, 0x6567a459, 0xe1c7da59, 0x3df43976,
-	0xf4babcfa, 0xf8be4b6f, 0x2ce66158, 0x176d47f2, 0xf29bbc76, 0xbb463f33,
-	0xba72f908, 0x4c10b5eb, 0x278fd971, 0x8487570e, 0x1d7a26f9, 0x42675f40,
-	0x98d8f211, 0xfd234f69, 0x3a6e66eb, 0xfee82797, 0xe8abbbd6, 0xbdffcf7c,
-	0x322332a7, 0x53f72a6e, 0x8f69460d, 0x96fa34d9, 0x65e3e945, 0x1d916f5d,
-	0x70d7f606, 0x7a7f3e14, 0xc3d26ef5, 0x1d37992b, 0xd5f7bde9, 0xe56e7411,
-	0x3961eadb, 0x4bfc9b9f, 0x35bf3c0c, 0x3987ec8d, 0x75373e62, 0x67503b73,
-	0x1c6818f6, 0xd239730f, 0xe7cd8b69, 0x8554420b, 0xf3fd75f2, 0x631de747,
-	0x15fcc493, 0xbdf00f6c, 0x52d93c4e, 0xdbce265f, 0x31eae384, 0x8990260d,
-	0x6e8996cf, 0x28a73e17, 0x83cf955e, 0x6b1a79e3, 0x3afac1ca, 0xd7cf4873,
-	0xc7483309, 0xa2f0fdf6, 0x37945db2, 0xeb70bdce, 0xb36f7c0a, 0x8a313c93,
-	0x04cf4c79, 0x6dfc88b9, 0xb75c6666, 0x4d3c16c9, 0xf4f133f1, 0x8f88b857,
-	0xf91843fd, 0x07581241, 0xd9b53f9d, 0xb171f9ce, 0xb050e60e, 0x085c716c,
-	0x9ce27ee2, 0xf3c7e6c3, 0x672f20c4, 0x5f3fa265, 0xc44ad5f9, 0xee67c80b,
-	0x5df78a17, 0x11f3f20d, 0x88a5de42, 0x7908b5f9, 0x8adcc597, 0xe480c7b8,
-	0x95f6fddd, 0x267ee037, 0xa3f7798d, 0x71387bbc, 0x32fdc506, 0x93e68f98,
-	0xc8d5433a, 0x5b57a72d, 0x46af98ce, 0xe7053bcb, 0xbed3e597, 0x9413b337,
-	0xbd04a497, 0x69529799, 0xfd12361f, 0x37210631, 0x3e78598e, 0xcf3166c2,
-	0x8853333b, 0x78598e6e, 0xb6b7c25e, 0x7ddadc5b, 0x3f0a437d, 0xdd3e7fbf,
-	0xc0f1c66c, 0xe113b98e, 0x07cc7607, 0xdfce167e, 0x41d29c2c, 0x6f9b0279,
-	0xe01bdc54, 0x6bbb66fd, 0xeba40abd, 0x7f70a99f, 0xc728ea8f, 0x3cf69c7c,
-	0x44f31b87, 0xf7be451b, 0xf6a38b66, 0x9a63f219, 0xb7d63d78, 0xed96e319,
-	0xac0e1d5b, 0x37d95697, 0xaafb88cd, 0x9bb1cc15, 0xaff7a0c5, 0xbe608f80,
-	0xe032c73f, 0x63f41149, 0x85bae23d, 0xefbe20d6, 0xf0177fc1, 0xdc3294f2,
-	0x82bff2bf, 0x773a42ee, 0xd27a3cc9, 0x85dd8d97, 0xbc60d86f, 0xe485b982,
-	0xf256f7af, 0x72132fb8, 0x571cbc60, 0x61b5d9f0, 0x85efa7ba, 0x5bb43ca2,
-	0x4cd37ff8, 0x80ebae3c, 0x91c4ca21, 0xc69fac43, 0xe4cdc1f9, 0x6bd3e71f,
-	0xfb0ff858, 0x4ff70cab, 0xf86a6972, 0x60ef9873, 0xbbb322a8, 0x8dea0ea5,
-	0x91fb8357, 0xcf15afaf, 0x543cf142, 0xe5e9237e, 0x65cd9d1e, 0x373e71d4,
-	0xc3aba017, 0x94b847ab, 0x60b4b639, 0x4129d73f, 0xd8cde67a, 0x9fd382de,
-	0xc94cfc23, 0x9e00c699, 0x00996b37, 0xc8bf2678, 0xffa30f9f, 0xac2fff5a,
-	0xcc74f118, 0x279ef520, 0xb9ffe789, 0x0ed53d68, 0xce97593e, 0xc22e7b33,
-	0xcf3f28f9, 0x8b74d0c6, 0xa997fef8, 0xd7974955, 0x300f3cbb, 0xe5cf4b25,
-	0x871e0ce3, 0xa66f9c6d, 0x7146e5bc, 0x7d53030f, 0xf08c3ff9, 0xc5b8c8af,
-	0x7f3606bb, 0x46fd8c5f, 0x07b7164a, 0xfdc0dce6, 0x1f228dc2, 0xcc4f7e47,
-	0xbfb27ee2, 0x377b4e64, 0x1e3dec93, 0x949dfd6f, 0x48d9235f, 0xf2115f94,
-	0x5f248fe5, 0x278edfca, 0x85dfb47f, 0x29e799fc, 0x40bed036, 0xef2921c8,
-	0x68ef22bd, 0x1018f301, 0x1ee23d4f, 0xabe5a395, 0xccdd0e48, 0xf7fef47c,
-	0x00ff3c15, 0xfd80d308, 0x6b4334dd, 0x6af3cd3f, 0x8fcf37cb, 0x3e38afb6,
-	0x7c0bb8e4, 0xa473efda, 0x6b433c9d, 0x87fa2f27, 0xcf4992af, 0xfea2fc67,
-	0x3e70e0d2, 0x3e546351, 0x27c88351, 0x3c2aec6a, 0x4f911694, 0xf3cdd8d4,
-	0xaeba1a89, 0xedc44f94, 0xb029af29, 0xde24e31f, 0xec94d25a, 0x727f910d,
-	0x8a4ff310, 0xaf6e74c2, 0x0c3cf3b0, 0xa2bca1e6, 0xce95871c, 0x8aeab45d,
-	0x9adb8fc8, 0xddf8d768, 0x5577aeb7, 0xbfe93d61, 0x4843f995, 0xc3f6b137,
-	0x5f7c59d9, 0x7ee143b3, 0x3302ff74, 0x059d3bed, 0xc15c4d5e, 0xd1c767a9,
-	0xa66ef8af, 0x3f27d64b, 0x2f830ec9, 0x019e18ab, 0x8979d185, 0xb67af6fe,
-	0x5190fc91, 0xea99ca72, 0x338038a6, 0xf5f92c69, 0x921775e7, 0x2cd9923f,
-	0xb84a61ee, 0xdb7379ff, 0x69ebcc55, 0x97576eec, 0x3774c2db, 0x43ec4b36,
-	0xf48accac, 0x7bd7efda, 0xbd7e44ce, 0x30b79364, 0x19d7da0b, 0x8bbfe483,
-	0x1f7a57a0, 0x2ede5f4f, 0xe150c5e8, 0xe602b05d, 0xd18efbd7, 0x0a6bfb8d,
-	0xcfff41cc, 0x7e4c94bf, 0x230e7549, 0x9cb1b53d, 0xf45e93cb, 0x3e3ac193,
-	0xfaf7e64d, 0xa466ac6c, 0x4ca7cf5f, 0xc55e3a23, 0xe83d8702, 0x7405db47,
-	0xd2cf7918, 0x8eb96d1e, 0xa9fe9075, 0x3d00667b, 0xf2947c93, 0xf4b99eb8,
-	0x741b8c06, 0xa1b3db6a, 0x285c395a, 0xbcf147f4, 0xff982da9, 0xf2e3ac50,
-	0x0f772d91, 0xf5fb439a, 0x2c4f8e45, 0xa17f7228, 0xebaece5c, 0x73d29fb5,
-	0xa17ae7fe, 0xad1ff454, 0x3d854abf, 0x17e41937, 0x7da56fee, 0x7ca9f506,
-	0xcfadd750, 0x59e785d4, 0xbb49da22, 0x890bea50, 0x8c09f2af, 0xbbb579e1,
-	0x1a7c84b2, 0xbe2086c2, 0x13e27fa1, 0x29583705, 0xf71fbfd4, 0xf18ad785,
-	0xa8fc1e80, 0x733afdbf, 0xb36be900, 0xd2fa44d2, 0x3c3ff68c, 0xd23e2ab7,
-	0xe35eff0b, 0x4c7d23d7, 0xdd374d64, 0x9926f500, 0xb728ac7b, 0x31fe4e80,
-	0x585a7e92, 0xa29f6f30, 0x7efa23a1, 0x98edf936, 0x5af52474, 0x9edcf7f0,
-	0x74bcc599, 0x0fe793cf, 0xa83aeedc, 0xd8267df0, 0xeed1079f, 0x93375b7a,
-	0x2c2664e8, 0x3955eb03, 0x9e9ff8b4, 0xdf472da9, 0x5ad0c50f, 0x48744328,
-	0x9c540678, 0x51bdf44f, 0x98f7291e, 0xb3e5ee56, 0xf8de78af, 0x423fc396,
-	0x1d7583ff, 0x0ef6891b, 0x8fc4aa58, 0x27b0f4d1, 0xb78f7beb, 0x118ac9ec,
-	0x7e15e96f, 0x68586be5, 0x40ca33e5, 0x687f3b7a, 0x82333e9d, 0xbc7f252e,
-	0x1379e06c, 0xae3cebca, 0xc6ccc135, 0x252e1104, 0xf928ffdc, 0xd3a41ae3,
-	0x95fd3094, 0xa487f789, 0x06cc197c, 0xd75dbd23, 0x01ea0965, 0xbfa2853f,
-	0x8afe906b, 0xdc89f6c2, 0x184cb477, 0x98f96740, 0x4cf60e17, 0xb495d201,
-	0x8e958a4f, 0xfde73c16, 0xb6f74bfc, 0xe8237ce0, 0xc3842dea, 0x8ae80559,
-	0xf4036afc, 0x147bf6ad, 0x4bfc49dd, 0x359cba7b, 0x6e677ed1, 0xc1b3d702,
-	0xcf49dbea, 0xba24b882, 0xa70e737b, 0x21e62abb, 0x5a672bba, 0x6b34a97a,
-	0x0974d1cb, 0x74b4ea23, 0x8bba23e7, 0x7478d7a6, 0x4ee91837, 0x2bd4dbea,
-	0x48e7ddd3, 0x8fc5df77, 0x3eee9039, 0xa7c672cf, 0x937a68bb, 0xc59f6cf2,
-	0x75768951, 0xfa428d63, 0xa19df8a1, 0x511e582d, 0xf6764f9f, 0xd93764be,
-	0xfc4d8ddd, 0x478f497b, 0x0533798f, 0x7cf7c56b, 0x1b96256f, 0xe877c1d7,
-	0xcf18f4ba, 0x0f7a19ab, 0xa1b85eff, 0xbfbc0de9, 0xdbcfd1a0, 0x337a7cbf,
-	0x6c0a879d, 0xdbcbed16, 0xd8dcb12a, 0x8a7fdbca, 0x31abae71, 0x82d02dbf,
-	0x96daafef, 0x6fdbe6ef, 0x114fd76e, 0x3ca7ddeb, 0x6bb506f7, 0x3f6eede3,
-	0xe4604e6c, 0xfaf6e027, 0x29ceb164, 0xd33af8bb, 0x867ebe3e, 0x4563e80b,
-	0xb9ec9f9f, 0x6575744f, 0xece2ef24, 0xb695cbb3, 0x474e7c1c, 0xbc47a639,
-	0x43f55bbb, 0x37741c78, 0x3675710c, 0xf8c8d3f7, 0x5429e621, 0x5717d847,
-	0x443b7367, 0x614f4bd6, 0xfd8d7e74, 0x72fe4ecc, 0x3e0cdf19, 0x07d414c4,
-	0x976146b8, 0x4e778cc4, 0xbb22682f, 0x1960fa62, 0x4ba90ce7, 0x4bc2dc61,
-	0xe58b4f9f, 0xe6cb2a47, 0x9129f3f6, 0xd7df2177, 0x4875f204, 0x4890fb17,
-	0x90f0fce8, 0xdb9ed077, 0xe734cc97, 0xf3e5f6dc, 0xbcecd4f2, 0x01cd6e7f,
-	0x549aeaf8, 0xe58bf7bc, 0xf2b79429, 0x4c161e83, 0xff381c4a, 0x1a0b2ae9,
-	0xcf8a0f29, 0x518b657f, 0xe5c257dc, 0x3f813cda, 0xd1186936, 0xa7815cef,
-	0x17a16cea, 0xca31598b, 0x6f0279a9, 0x1937343f, 0x336ebeb8, 0x798fc944,
-	0x1e3f28d9, 0x6bcf6b8e, 0x97c947bf, 0x4aee311a, 0x62afc761, 0xfd3fe47d,
-	0xa7f1d844, 0xfc76e61e, 0xfe41d66a, 0x719fded3, 0x961ebe3b, 0xed12f487,
-	0xabddad07, 0x6877d72d, 0xdea00dcb, 0xaec6ffb1, 0x8633b928, 0x1f7ba5fb,
-	0x3f432fae, 0x77cecd64, 0x235dffc8, 0x2b404ce5, 0xe740c067, 0x51a1e672,
-	0xd6fabfe4, 0xd819e3f2, 0xf26995d5, 0x76c9ef4b, 0x5e77f846, 0x0d2e79e4,
-	0x7a11fb8c, 0xc16f23ed, 0xd28b2c7d, 0xa572d14f, 0xe915c850, 0x5bf290ff,
-	0xc6429bca, 0x77ec14f5, 0x9b60f1df, 0xe1ef3b28, 0xc4afa16c, 0x4dfa4dfe,
-	0x88547da4, 0xd7d211f6, 0xba2226a8, 0xbf727eb0, 0xe847d26d, 0x662505a5,
-	0x19917bc4, 0xa6e11bf8, 0xd9f58db7, 0x68f1f434, 0x83f7e5f6, 0xf451efda,
-	0x0b63f723, 0x84dcfd05, 0xff181891, 0xb81f720f, 0x5ccfd38a, 0xf4843de6,
-	0x9cd5fbf3, 0xf0bee47e, 0x3d03ef9b, 0xa07dc8fa, 0xdd7e4fdc, 0xdd3f60fd,
-	0x863ec058, 0xe95cb1e7, 0xfdf1e017, 0x45d38546, 0x3ddf9cfd, 0xf2c2c556,
-	0x733368e2, 0xb97086ab, 0x8cc9a665, 0x0316977e, 0x99cd2fdf, 0xd2d97ef5,
-	0xb413f908, 0xb8401f97, 0xf9276eb1, 0xdaadeb77, 0x3d2b3671, 0xf711fd77,
-	0xc95a8f55, 0x08e174af, 0xc2e59323, 0x0f9411ae, 0xc78199fe, 0x6e7ce55b,
-	0xb5f7bc3f, 0xb95bd410, 0xcc6296ee, 0x0255a82f, 0xb7c1d62f, 0x77beac0f,
-	0x756bbf91, 0x672f7141, 0xe427c50f, 0xbafdf1b8, 0xc6c7927e, 0xf73f5c03,
-	0xdf940929, 0x4787ef0b, 0x38fee9c6, 0xdcefcb88, 0xb807df4c, 0x5b47a91e,
-	0xf827f3fa, 0x1b30b413, 0xa7ce1294, 0x704de708, 0x985fcb7f, 0x13798ae7,
-	0x04e2231b, 0xbe663ed0, 0xcf2179db, 0x01726147, 0xba6567cc, 0x7fd717a7,
-	0x4f85c44a, 0xa9e23889, 0xfc571e44, 0xfe7d7f7b, 0x7ae20db4, 0x3b8894e8,
-	0xc6d14a9e, 0x44bd649b, 0x6cd93cf1, 0x60346ef6, 0x37799ebc, 0x3d70fe82,
-	0x7ca26a64, 0x5f1c4595, 0x6b252fbd, 0x1ac811ee, 0x106a3e54, 0xd399fbb4,
-	0xe3041fab, 0x9ed36f2c, 0xf715ea83, 0xba0af6db, 0xa7f0b5e9, 0x506b371c,
-	0xd76c28f5, 0xb3df80bb, 0x289e5fda, 0xbfea5ecb, 0xc910baf7, 0x8ff2fea3,
-	0x3a9ce242, 0xf8c893f7, 0x61f8bc40, 0xfa30bc74, 0xbc74699c, 0x37e4b17f,
-	0x245fef11, 0x6ee2d4e4, 0xd5b86f1e, 0x820f36cc, 0x6775b7ef, 0x26b8fc50,
-	0x135c3fd1, 0xbf5bf7ef, 0xa4879e51, 0x9edcdecf, 0xcff8f8fe, 0xf5e3e222,
-	0x2f5a3e22, 0x5da9d7d7, 0xcf0164df, 0x3e3e31ef, 0x60739079, 0x9f3a3c7c,
-	0x33b445e2, 0xac3c610c, 0x55b87071, 0xd12aebe9, 0x39617c4f, 0x35f73ca3,
-	0x416b2d6f, 0x2d9af23f, 0x615596e2, 0x380bd777, 0xd3975bc7, 0x8d2e63ab,
-	0xb9813ebf, 0xe593d622, 0xc994d14b, 0x33c88f92, 0xad93541d, 0x34db9f69,
-	0xf07f5344, 0xef9a51ba, 0x4d22fef9, 0x1af5a0b9, 0x6d61fd4d, 0x88f29a15,
-	0xea6bd79d, 0x4921b217, 0xa23b6fe4, 0xbb125f47, 0xf347302a, 0x85def47d,
-	0xb29ff69a, 0xa0931da6, 0x7b45a75e, 0x7bf3332f, 0x8594c67a, 0x76c7a9f3,
-	0xc3f4d52c, 0x29504a82, 0xf633df0b, 0x79a7b899, 0x878f0f79, 0x5ab5dd5c,
-	0xbead4e33, 0x1d18f08e, 0x7d622def, 0x086e37e4, 0x1b20ee28, 0xd55dff18,
-	0xaeed4ed5, 0x78c8f764, 0x2241c6c8, 0xb2cd97de, 0xd3475d39, 0xc3ec8d85,
-	0xe4f4bb0b, 0xc3642c7f, 0xf0449a1f, 0x6b80b032, 0x302efe20, 0xf0bb17ee,
-	0x798ddd8c, 0xb5bfb745, 0xca63e68c, 0xde05d2d4, 0x5eb9181f, 0x5d2d48eb,
-	0x3a5addd8, 0xa5a09a48, 0x27786883, 0xc174b47b, 0xcbbff042, 0x86753bc0,
-	0xb7fe6e96, 0xf081dce0, 0x5be186b5, 0x62d3d07c, 0xbcf1b823, 0x999f6935,
-	0x1d143d84, 0x4e7690d7, 0xbbb09070, 0x2e323f45, 0x93f159b1, 0x771fd55d,
-	0x0bcc109c, 0xd53da3e6, 0xc95fb8c4, 0x6fe5107b, 0xbd24bf0c, 0x9497e78f,
-	0xc09b9d70, 0xf32d67f5, 0x663efc92, 0x93a4fee1, 0x9fc8abd5, 0x913592b4,
-	0x9cd9fddd, 0xe8efc2e9, 0xca577aa7, 0x9f901853, 0x8b29f600, 0x06aed7f0,
-	0x1fef1a8b, 0xd2a7868a, 0x78ed04ad, 0x4b75986e, 0xfca3e07d, 0xedde0f15,
-	0x68ff89a9, 0x51e65fed, 0xb497e522, 0x1278e587, 0xc9ae529e, 0x49ac4c71,
-	0x117c899f, 0xc8d8e725, 0xd693f8e8, 0x41fd239f, 0xe3238e32, 0x9bfed14c,
-	0x55b8bb08, 0xc1d2718f, 0xce782df9, 0x21e1d8b7, 0xeb29613f, 0x4fdf05b9,
-	0xa8b47730, 0xb8bfe12e, 0x2ffbf58a, 0x2babeae2, 0xf26fb5c4, 0xf247a12b,
-	0x65b3c607, 0xff961c7c, 0xf1a11ff1, 0x8b95c524, 0xf2f398f3, 0xd3d22708,
-	0xfba6bf40, 0x8fd02bf8, 0x8a97d75e, 0x3130aaf5, 0xfdde223d, 0xf5a212a6,
-	0x367990fc, 0x6fdb9e45, 0x6ed31d60, 0xe8327f21, 0xa727bc49, 0x58bbfb93,
-	0xac3db457, 0x0759bf92, 0xafba412b, 0xde711165, 0x2a77f0fc, 0x659607eb,
-	0xec95d21e, 0x82f1a789, 0xe0a3ca72, 0xc84c53f9, 0x8cffb941, 0xf993cfb7,
-	0x4f7ef218, 0x94547799, 0x1c75f823, 0x03fd871b, 0x94e595bf, 0xf8017fa2,
-	0xc7e48953, 0xfa253cfe, 0xa31f803e, 0x31f32fd6, 0xf212f6f4, 0x5c8b2d1b,
-	0x8780d7ef, 0x9c7e5bb4, 0xc8e9e8c3, 0x3eb3d171, 0x3d6fc4e1, 0x47a4b9f8,
-	0x68da3f93, 0xfa0d0d84, 0x79145e13, 0xbb5a1d81, 0x9d1c96fd, 0xf7df1b80,
-	0xf15e095c, 0xf8f221f1, 0xaebe3e04, 0xf8f3261d, 0x0c971c24, 0x0d0afb84,
-	0x8ff7fb5c, 0x115f70fd, 0x2e12ee0b, 0x7e7b4ae7, 0xdbd2f881, 0xbc23a58f,
-	0x577aa617, 0xe3dcfd63, 0x5d144fa1, 0xfa555e78, 0x7b8794b3, 0xe74f4ba1,
-	0xe3ae1aff, 0x25e1b072, 0xf386893d, 0xb38a26dd, 0x41bd74d6, 0x66d9e176,
-	0xfc06b410, 0x72180cbd, 0x08fc65d8, 0xb78ef051, 0xd9eb924f, 0xe5f62390,
-	0xef32fd62, 0x39b9d607, 0x475e6627, 0xdfb41c3f, 0xf4aa1c05, 0x1cf09263,
-	0x92be7f59, 0x791797da, 0x3af45f5f, 0xfe78722a, 0xf7b329db, 0xc3efec3e,
-	0xd81d9c9e, 0xfbbe955f, 0x67c23670, 0xbbe742ad, 0x79f898a6, 0x5e712cdc,
-	0xc9a8426f, 0x3399e78d, 0x667df873, 0xf7a47e23, 0xfdf91c62, 0xe0a677b5,
-	0xffd93439, 0xe7474508, 0xee7b1947, 0xc12c7f83, 0x3722e6f8, 0xd8bf6fde,
-	0xba2fee24, 0x002c1acb, 0x91baf239, 0x186547df, 0x66e744d2, 0xe4f592fa,
-	0xb3d34cd7, 0x727748a9, 0xadbcf2de, 0x01f78f7c, 0x7cb15e60, 0xafa5a53f,
-	0x7bfa0d78, 0x75c83d04, 0x2beca94f, 0xe185b26e, 0xa33cf32f, 0xf82553e1,
-	0x1b43ee43, 0xd05b5ef0, 0xbccde7bf, 0x6daf7d1c, 0x5874feff, 0xf6363dff,
-	0x837eb8c8, 0x1e3493c5, 0x6bdc51f9, 0x278717fb, 0xa477df89, 0xbcf6a7bd,
-	0xbf97b7c8, 0xdeef1253, 0x51ccff9b, 0x827b97be, 0xcb85e5e2, 0x7078ffbc,
-	0x99564869, 0x739d357a, 0xdeae5ef7, 0x8fadff2b, 0x28bedfb9, 0xd3dff7be,
-	0xbcec6af9, 0xceb15ec5, 0x88617e70, 0xe7f729ce, 0x7e54be2d, 0x1a477bd9,
-	0x08d23ef0, 0xf6bcc838, 0xb48fbc06, 0xd0bf4638, 0xe576cb9f, 0xc4aa877b,
-	0x8f301abc, 0x3df23530, 0x38f0b7a7, 0x302f2269, 0xfb7c8894, 0x9d3d2ecb,
-	0x11e5ffe3, 0x31dd8cdd, 0xcb9b9de6, 0xa9ca32e1, 0x0e8d1f12, 0xe3b5fbf2,
-	0x79e793d5, 0xe8d8b9e4, 0x845675f9, 0x63f9c56e, 0xf1ac729e, 0x3f7cb91c,
-	0x99dde72b, 0xf0d1f1c2, 0x9bdf899a, 0xf27cf2aa, 0x4ad094ce, 0x168713e2,
-	0x1e04c3cf, 0xe50faf3b, 0x99b2b9d1, 0x8f10efdc, 0xfaa7261e, 0xc8be51ca,
-	0xd4caee7b, 0xc111c526, 0x87a2578f, 0x1af5dc30, 0xbb840ebc, 0x7ecbbe91,
-	0x7c151f4f, 0xdc363ccb, 0xfa112dcf, 0x5a9ec96e, 0x7ee587b2, 0x3d4ef4e9,
-	0x669c6fe5, 0xba72ae3c, 0xd0fda14d, 0xeb631f52, 0x7cad2e40, 0xaa3378a2,
-	0xb09925ae, 0x1efe1496, 0xe9661f7f, 0xbaf8a8c6, 0xbd495fd8, 0xbe5fc72a,
-	0xd7176b4d, 0x467f6db0, 0x51f4e9fb, 0xb0563f2e, 0x2b3fd226, 0x57f6d01f,
-	0xa7d667b3, 0xbce8cf38, 0x8fc21180, 0xec572d37, 0x1958ca57, 0x4f358fea,
-	0x9fc46e7c, 0x17c78960, 0x434ffbf8, 0x7ddff187, 0x8efe27c2, 0xc96f3e08,
-	0x1720fcf5, 0xf2ef3efd, 0xf5ceaef9, 0x7f45c9cd, 0x7e7cbbc9, 0x702eea17,
-	0x8d2bb33d, 0xfd8b5bf4, 0xfaff922e, 0xdffe5cc1, 0x0035f78b, 0x71264c9c,
-	0x49aeba6f, 0x4df6489f, 0x43ece880, 0x7e731de7, 0x26776540, 0xd3da43f2,
-	0xbf6067d3, 0x1eada7ce, 0x72d6df5c, 0x2ffa214f, 0xf3f356b6, 0x8f1366a1,
-	0x397e07df, 0x538600f1, 0xaf6c7686, 0xa39d1740, 0xfd107f7b, 0x3fbaad42,
-	0x98bcc61f, 0x5f3cc9d6, 0xda175d32, 0x3c62283f, 0x899035a7, 0x68e77df1,
-	0x9a4e6f7e, 0xcb90bcbe, 0x36276e7f, 0xe85c5c08, 0x627f202a, 0x17fa41af,
-	0x2e742c3b, 0x2eff8eab, 0xf1c628c6, 0x70eaf32f, 0xf176910e, 0xf9a666d9,
-	0x1d51869d, 0x4890d04a, 0x3c50a8f7, 0x30436ea8, 0x67d416fd, 0x4f14a94f,
-	0x7b4bf393, 0xe302ab3d, 0xdd8f5266, 0xbfb838a2, 0x0bfdd84d, 0x71e3fc98,
-	0x9e82f9b7, 0xff7b0816, 0xf7872b16, 0xc3cee652, 0x2ccd0b76, 0x76ac0751,
-	0x2947654b, 0x90d6b3ad, 0x8c85768c, 0x47b7c51f, 0x1ac9fb62, 0xe7e7617e,
-	0xe1be959e, 0xf419c9d8, 0x3f865d41, 0x693c85db, 0xffcfce18, 0x83cca1b1,
-	0xd786caf1, 0x30efd046, 0x3c781299, 0x1996e41c, 0x843a11ef, 0xbdd61efa,
-	0xc88b15ea, 0x73880a5b, 0xd8defccd, 0x453939c6, 0x78f11e74, 0x71ffdd1f,
-	0x23ca10de, 0x847906fe, 0x92bea637, 0xe01fbbfb, 0xd90debbd, 0xf941d760,
-	0x789fee74, 0x25684879, 0x92991bde, 0x47978977, 0x72c13e85, 0x6cc25e4e,
-	0x5685172a, 0x3e3ca1ea, 0x7197932f, 0x36040a03, 0x6cf06f35, 0xc92dda3f,
-	0x87702ec2, 0xc377bce8, 0x917423cb, 0x1e7758fe, 0x84676797, 0x3e4cf93f,
-	0xc20e6dbb, 0xfaec647b, 0xded27969, 0xc9f5a36e, 0x2cf6caf5, 0xffbb7633,
-	0x957e7210, 0xc53da738, 0x3c2d5aca, 0x044fe7fe, 0x1eec1c3c, 0x7fcbf141,
-	0xfde14dcd, 0x4f74423b, 0xfa27ec8f, 0xb8e41c77, 0x7bfe15ab, 0xf2a3e759,
-	0xcb977ebc, 0xb38c2be5, 0xea19c691, 0xe79be7e1, 0xfe2214e4, 0xc0aa6f00,
-	0xc9f7ca9b, 0xd07e7ced, 0x13fefe2f, 0xf46287e8, 0x0afc1ffb, 0xe787e7ea,
-	0x27274d1d, 0x5aab38c5, 0x2fb6dc78, 0x69e880b9, 0xf7dc558a, 0xc75da252,
-	0x9f6e3cf8, 0xc592f3ba, 0xaf091d79, 0x69c6850c, 0x09cc7011, 0xf6339f0d,
-	0xaffbaf9b, 0x8eeb4bff, 0xef0797c0, 0xc5d8396d, 0x9f1e37ef, 0xf485f1c7,
-	0xe076429c, 0x677f4d76, 0x9fb547d6, 0xae5f28c0, 0xda80a521, 0x6fee2bdf,
-	0x61d9f795, 0xdc71fcbb, 0x57bb45be, 0xfcc1a7de, 0x1c645993, 0x8cdeffb2,
-	0x70bf710e, 0x286f3aff, 0x8874eb11, 0xef223a75, 0xcfe7ec33, 0x73797d63,
-	0xb8e903ed, 0xfdfdfe1f, 0xfd12298d, 0x563cf869, 0xf1d7c87f, 0x1e5572f0,
-	0x1bdf2797, 0xa33ce45e, 0xe70fd9e0, 0x7849f9a8, 0xbb537f22, 0x94ba5a31,
-	0xf411ccf3, 0xf3bf8039, 0xe278e5bf, 0xbbfad97e, 0x7338be79, 0xbebae969,
-	0xf9875f33, 0x07ddb209, 0x34a0c078, 0x21bc27ec, 0x7327ec4f, 0xbc9c4e58,
-	0x339e6f47, 0xde917fa6, 0x7b27ef47, 0xd9efe593, 0xbd1afd69, 0x397bfe4e,
-	0x7efc73fe, 0xfca36b83, 0x7a8f183c, 0x176e16ce, 0xf2da2fd6, 0x037e0263,
-	0x797d54fd, 0x5312bf38, 0x3bf8f3c5, 0x4af3ab5b, 0x7760ab67, 0xdc552494,
-	0xa6e50f99, 0xfc93c6c7, 0xf154192e, 0xf3c83e79, 0xe04d8f35, 0x7c5747df,
-	0x79cb043e, 0x8a797913, 0xf79479e7, 0x9eccb460, 0x2bb6159a, 0xd173ccee,
-	0x1d4afab8, 0x42676bdd, 0x63d60623, 0xf944dd7a, 0xf1ae1280, 0x5d26259e,
-	0xbff3ac53, 0x03d3f4f7, 0xc04cbf8f, 0x1fd0ba7f, 0x2105fc28, 0xe82fe355,
-	0xcfe7e44d, 0x92fd5f7b, 0x9bdcd7ce, 0x079f5be7, 0x67ad1bed, 0xf287cd6f,
-	0x1407eb06, 0x603c53ef, 0xc61fa087, 0x608b60e5, 0xadd9cabe, 0xd89fb45e,
-	0x2559b76a, 0x18ff0ab8, 0xf007a9de, 0xa7b5e57b, 0x0f883c7e, 0x4c79c5e3,
-	0xf1a07214, 0x15fdbfb5, 0x678dc4e3, 0x1b346e6c, 0x7c3f7627, 0x135fda27,
-	0x1bfedfbb, 0x3cfcc3d7, 0x44f79c90, 0xfbc27ff4, 0x9a265d09, 0xabeec4ff,
-	0x6bfd6056, 0x402eebdf, 0x44eeb93a, 0x42c505b0, 0x3effabef, 0x880e7348,
-	0x7cd97a7d, 0x39f1b8d1, 0x013f8f09, 0x1e0893a0, 0xf8f0e73f, 0xced9f28a,
-	0x0e6e8f3b, 0x7b549391, 0x78ec0ade, 0x605f3b8a, 0x7b8c6e09, 0xd1fd73c8,
-	0xd5e3d57e, 0x7f783eb0, 0x20cc1f5d, 0x729e9ec2, 0x24820cd1, 0xc9672e5c,
-	0x39a5729a, 0xcabf534b, 0x3ef9af91, 0xcd2af33d, 0x42ae99f7, 0xc8d6794d,
-	0x37fa9a89, 0xe535cbba, 0x6a6613d9, 0xaa7b57ea, 0x60c2e535, 0xf17ea687,
-	0xf7ed2e91, 0x788f4c63, 0x7eee3a28, 0x27a59f03, 0x2d9ee43d, 0x06f4d53b,
-	0x85fe273e, 0xafda2383, 0x8ec5cd7c, 0xf4bdf037, 0x9f9f472b, 0x9be67e92,
-	0x3180b6f5, 0x53393fb6, 0x83df082d, 0xf3f1d7a0, 0xfb25ef53, 0x937880fe,
-	0xa0a6a7e7, 0x5090195f, 0x9fb9db75, 0x5c32efe2, 0x6efdc458, 0x943111c7,
-	0x7f276e4f, 0xd34371e5, 0x79e47fb3, 0xf728b903, 0xaf9bebae, 0x8b94f759,
-	0xcbbacd3e, 0x3c28aad9, 0x5729a1dd, 0xd4d6ee39, 0x5eb99e9f, 0x6ba67df3,
-	0xb69e144b, 0xba37ca6b, 0x53c28e1f, 0x9e9e147b, 0xf4977cd2, 0x5ffc2ddd,
-	0x0adfa1af, 0x3d42939e, 0xc9878895, 0x1f08faa7, 0x2ada7a13, 0x1cd74f11,
-	0x957c20ef, 0x2895bd04, 0x348ecb2e, 0x20cf81bd, 0xddb0cbec, 0x7a4ce681,
-	0x91766c1e, 0xf370ebff, 0x691e7a48, 0xfffbd376, 0xcf409e68, 0xe87b355f,
-	0x33cd9ff9, 0xecd3d9e8, 0x734767a5, 0xae7fd507, 0xcffb8bb9, 0xddeffb52,
-	0xc1bf45c8, 0x01a85d79, 0xc18ec623, 0x9e9e495b, 0xc79d084f, 0xeb7f06f2,
-	0x3420a9ec, 0x901d67f0, 0x9e207f2f, 0xfb4f2e45, 0x1e0e7860, 0x19fdf8cc,
-	0x43a37f22, 0x3b4429e7, 0x0fe3f47c, 0x32e6a7de, 0x37bd69b6, 0x183a7f13,
-	0x132866cb, 0x90f7e9b2, 0x93cfbc1e, 0xa8b3d8c3, 0xf7bee84a, 0xb9636707,
-	0xe79efc57, 0x241fc7e0, 0xc75bfc3b, 0xe2033dd9, 0xc707a3ec, 0x7b3fb388,
-	0x7f4765ca, 0x46afd1cf, 0x471e11d8, 0xc3cbdf85, 0x3bf80d0a, 0xa16ae51c,
-	0xf1ecf501, 0x5421e738, 0xe0c97953, 0x7bb75c52, 0x5f91e51e, 0xe1dfa06f,
-	0xfdf0a39b, 0xec97acaf, 0xf7a0fae2, 0xa7ed1346, 0x2b3ce98e, 0x957a3f90,
-	0xce10c7be, 0x14fe3d37, 0x7b5ea9e9, 0xafc21e5f, 0xbcbdf1fa, 0x4c7becec,
-	0x0d944771, 0x8f953e1c, 0x6fdb393f, 0x33e15efb, 0x0d11d71b, 0x1d83b99f,
-	0xf4115f7c, 0x201da2e4, 0x3daac7cb, 0x2c5714f5, 0x75c30cf7, 0x389af51c,
-	0x81ed7aff, 0xf237e461, 0xf08bce94, 0x360cf4ff, 0xa2e7fad0, 0xe83f44de,
-	0xd6207d42, 0x1f9e15ef, 0xa23dedcc, 0x2e67dc13, 0xe0bed2b0, 0xa3df8e98,
-	0xeedf5d10, 0xcfa3fbe2, 0x9c87dce2, 0xdc57be28, 0x0becff54, 0x5aef5fd0,
-	0xebdd750b, 0x58f6411d, 0x1740136f, 0x54f7ba68, 0xddfe39d3, 0xa12016e4,
-	0xf82def38, 0x6cfef82f, 0xfc5f9df7, 0xb07fea06, 0x1d26ead6, 0xf04518e2,
-	0x2f2a285b, 0xfd93354e, 0x6e4e78b4, 0x5bc5ea05, 0x56f0bc44, 0x614e9abb,
-	0xe8d93543, 0xdb967e80, 0x0403370a, 0x6ab4cad9, 0x5364fe23, 0x9b1dce4d,
-	0xe87ab9f1, 0x58f22376, 0x9b7d98dd, 0x07ad8cd1, 0xf9252e16, 0x19a77a17,
-	0x3adb75e6, 0xe7ef8bbd, 0xdadaf9e4, 0x22f7946f, 0xc898f7e9, 0xd020024f,
-	0xa5c9357e, 0x4949f668, 0x181f4e82, 0x6331e22c, 0xda4bd8d9, 0xe44ed778,
-	0xdf8bb3a3, 0x1e271e19, 0xec2efda1, 0x7b8adfc7, 0x4fefa39e, 0x5c3ae391,
-	0xcc75ff7c, 0xf6899408, 0x07ae42e4, 0x7cffcdc6, 0x7fac2943, 0x4743b75c,
-	0xd5b70d79, 0xb87880bf, 0x68f025d0, 0x4fc85d60, 0x7c97f937, 0x4c421bf0,
-	0xf0dce69a, 0xbba5f495, 0xa91951c7, 0xde424b2f, 0x397d48ca, 0x12adafa1,
-	0x8fd4a2f5, 0x211ae6c1, 0x8e489b8f, 0x475e6c1e, 0x7ecdc3e5, 0x6e691e7a,
-	0x8db8f215, 0x79aaffbe, 0x01c790a7, 0xd2f78f21, 0xf9e6eefb, 0xd9ad7cf4,
-	0xa985cf47, 0x6e11d7be, 0xd73b8e32, 0xdcbca3ec, 0x189b0f43, 0x742ef1c6,
-	0x038f289b, 0x47b1e238, 0xc94f30d2, 0xa344e744, 0xe5a295f3, 0x743d3f7c,
-	0xe5b7b80e, 0xfef7e46d, 0x17b4233c, 0xa7a7c707, 0x4765cca3, 0xe0f1f4b9,
-	0x8e8724f3, 0xb4765cba, 0x2e3e4fa7, 0xdd971eca, 0x0d3fe500, 0x71fd25ee,
-	0x9bb2e7d4, 0xe3c9fca0, 0xdfbbfcbd, 0xf940b765, 0xfc7dc1d3, 0xd051807b,
-	0x2fe0ecff, 0x33958e48, 0x47f220e5, 0x2a7f39a5, 0xd7d00ba8, 0x2f9107e5,
-	0x992e67a6, 0x60b17c8a, 0x72e88bb0, 0x41fd6ba6, 0xd91acf2c, 0x1515e2ae,
-	0x46e15b1e, 0x5691576c, 0xa9bb62ad, 0xc46c7739, 0x6e86d376, 0xcddb2357,
-	0x236fb318, 0xb7706f96, 0x2e9f68ab, 0x1a563940, 0xe59647ee, 0x65a72977,
-	0xddd5dd3e, 0xe307d25e, 0x0fa4bcba, 0xe62a5c24, 0xff426f56, 0xe2976367,
-	0xa9a5dfc0, 0x27f4ab98, 0x62ee6033, 0x0a93de03, 0x3dfffaf2, 0x87ac77ae,
-	0xf9623675, 0xadb72a1a, 0xedfa06ff, 0xe2f6007f, 0x8000e831, 0x00008000,
-	0x00088b1f, 0x00000000, 0x3cd5ff00, 0xe5547809, 0x9dcee7b5, 0x4c92642d,
-	0xe2420836, 0x96249964, 0x26b6432c, 0x0c486410, 0xf90130ee, 0x10196544,
-	0x044816c2, 0x7eab17eb, 0xe0171a19, 0xd16b8d69, 0xb5c46faa, 0x61e4b6af,
-	0x1d0958d4, 0x87d252aa, 0xb410553a, 0x88a47479, 0x119099f0, 0xc7d278dc,
-	0xf7fce73b, 0x24cee666, 0xbefd1480, 0xff938607, 0xcfd9fbfe, 0x005ffff9,
-	0xb3f85380, 0x34607f02, 0x3d2538fe, 0x0468048c, 0xd1bf67f1, 0x0395b26d,
-	0x8c0734ac, 0x412fa3a0, 0x6010aba3, 0x76960eaf, 0x24a40014, 0x0b7afcc3,
-	0x74b08d96, 0x5de7960b, 0x05480368, 0x20bada68, 0xda85816e, 0x6066e3bb,
-	0xe21745fb, 0x52ce38af, 0xe0546e05, 0x9bd40a93, 0x4f34899c, 0x1fd24d9a,
-	0x856fc7ca, 0x064a7850, 0x3d9ab7e8, 0x448004ba, 0x0dac7b93, 0xfb9bedc7,
-	0x8758834e, 0x31d688af, 0xeb1ebd6c, 0x6c3200e3, 0xca1f1e56, 0x5e541982,
-	0xc846ed09, 0xcff5b846, 0xda22a4fb, 0x2327c597, 0x5f434e84, 0xf9ec5f20,
-	0x63fe1654, 0xe0543d06, 0x6e03e97a, 0x70d79969, 0xea566020, 0x743967f1,
-	0x226670ec, 0x7ed45ede, 0x18bf046f, 0x7dfb43bf, 0xbe8de215, 0xbf697537,
-	0x0f5b5403, 0x0230438d, 0xd9dfb8cb, 0x855efe12, 0x878f0dff, 0xc3c06749,
-	0x10f0a1a4, 0x1af01fb5, 0xd7de8e41, 0xa66ecb0a, 0xc0bee473, 0xd1fcca9d,
-	0xf7218108, 0xf445f2a7, 0xfe05dafe, 0x25ff02f5, 0x5a74e736, 0x38fcdd5f,
-	0x8e005390, 0x4d79356d, 0xa9ffdc99, 0x1744293d, 0x2d837593, 0x5b5b3e9a,
-	0x00de8367, 0xcdd5adb0, 0x14bad7d0, 0x3f8076f4, 0xf97336b5, 0x2e16d6ad,
-	0x30f568ef, 0x8ebad9dc, 0xdb5a5fe1, 0xeb577eb9, 0xdbbf2e46, 0x6fe865ea,
-	0x5fbf917d, 0x86657f3b, 0xff4d12db, 0x45cec9d5, 0x7b9e8fc4, 0x3e9913aa,
-	0xc853f7b8, 0xc81a9eab, 0xc344b66f, 0x9d658301, 0x8f65c094, 0xd9e1f711,
-	0xc36de316, 0x8c73fd7d, 0x19c689bb, 0xad7e09a8, 0x4a437c43, 0x30d0f180,
-	0xbe9abdd2, 0x3a1c464b, 0xe4f56689, 0xeb0efe12, 0x6407bf3c, 0xd39b56d9,
-	0x383e47a5, 0x17558f1a, 0x6582dc00, 0x78f3ce0f, 0xfa85abaa, 0x48c07e41,
-	0x3fa29ce3, 0x097c7193, 0x3af07766, 0x0e1ca210, 0xb1e808c4, 0xd18f2c49,
-	0x40ddc850, 0x60f99fba, 0x1913e9e0, 0xcb3382b6, 0xa8f870c5, 0x9e03ab93,
-	0x6567a432, 0xd584c3ac, 0xa4f8127d, 0x46538412, 0xd38e00d6, 0x13d46e97,
-	0x5644149c, 0x9fc3c750, 0x6322dfc9, 0x14cbf186, 0x6b94d448, 0xed35a3cd,
-	0x9a99aceb, 0x5cf4befa, 0xb4d2ff1e, 0xfaed348b, 0xc59a5746, 0x232f53bc,
-	0x6f7465d8, 0x0974805c, 0x9b1c9956, 0x98bdfeb0, 0x062822f8, 0xbf1b1698,
-	0x317be089, 0x376a5e19, 0x14c9c0ed, 0x934e7dc0, 0x108b237d, 0xc6db9755,
-	0x99edc76b, 0x76c36353, 0x6957e657, 0x25c121d7, 0x1dabdfb4, 0xa7df3453,
-	0xe9ae5e57, 0x93fb32ef, 0xcef5ad08, 0xc6f7cd7a, 0x9f41af96, 0xe5b1300c,
-	0x014be824, 0x343afbc6, 0xecee94e3, 0xbf1fb4d2, 0xeb12641b, 0x378e7d92,
-	0x741f9609, 0x152ac4ca, 0x24df9b87, 0x3fa5f558, 0x4e01f683, 0x9f5159b0,
-	0x83dc8a4b, 0x963d0247, 0xcae52927, 0x812db7a0, 0xf21270e8, 0x89bf48f5,
-	0x6321c230, 0xbff2a963, 0x4c1f104e, 0x32002052, 0x16abf607, 0x3a79804b,
-	0x4598d78b, 0x1be5056a, 0xc906c1f5, 0x3847a691, 0x50540e47, 0x8a0428f9,
-	0x973aca08, 0x2a6bf89e, 0xb2a58f34, 0x0469dc09, 0xbf74483f, 0x2fdc7c4f,
-	0xe2c4da05, 0xcfc4c982, 0x68ff3f75, 0x17ac6dde, 0x5c261c62, 0xfebaefdf,
-	0xfd6b4a91, 0x91f53fbb, 0x7e216c37, 0xcd7eb26f, 0x8dcb5278, 0x7f19c72d,
-	0x2d6fb96a, 0x92e177cc, 0x9f680ddb, 0xaffe3610, 0xed0a76cc, 0x53a23ada,
-	0xb8c9fc23, 0x1ed420ba, 0xc418be3a, 0xbfea3177, 0x04d35a7a, 0x5ddfd7c2,
-	0x6f576c4e, 0x9e087210, 0x1c4ef545, 0x29463ea7, 0xa7d44f83, 0xb2a1ed2a,
-	0x6ae9cb9e, 0x6f68957d, 0x587bc757, 0x96ad1fb4, 0x522ef195, 0x9ca2cdcb,
-	0xa0f7cea9, 0xe5aa1728, 0x397170ff, 0x613fb44e, 0x29ef559b, 0x53ffe908,
-	0x0f18ddaa, 0xa06ec9e3, 0xc933903d, 0x1abb481e, 0xeda21f98, 0xb15eb685,
-	0x237ff317, 0x44c58c7b, 0xdf63cb8f, 0x90eeb921, 0xf1bae480, 0x8bd38376,
-	0xd49e7ff3, 0x12c6b451, 0xb7e7dfc2, 0x6abb7c08, 0xb6329ce3, 0xde6af95f,
-	0x3923e226, 0x85c8f76e, 0x563addf8, 0x4ea77ac7, 0xe88138b6, 0xfbd0af7b,
-	0xd848ff6a, 0x8686f2d0, 0xb2f5519e, 0x6cc1f3c4, 0xfaf9c1fc, 0xf4f51bef,
-	0x8e59c206, 0x9370973f, 0xdcf42999, 0x95add448, 0xea36f3f8, 0x3dd23359,
-	0x3a9c1b25, 0x1af29f6c, 0xf1a267ea, 0xc7d0bf41, 0x24f8c5af, 0x8f959c14,
-	0x6ff6c9bd, 0x8e528ca1, 0xcf2d7bf8, 0x7c89979d, 0x9fce347a, 0xd0db7c4b,
-	0x75d78db2, 0xe3cadd8d, 0x10583583, 0xcce2cf8e, 0x9e97fc28, 0x3fa5ff01,
-	0x8271fe26, 0x75cfa403, 0xbeb47428, 0x78b796e5, 0xef95cbbf, 0x43325fac,
-	0x472cb8ed, 0x39c68f97, 0x0e1f0832, 0x74074e85, 0x5f050ab6, 0xfabe1357,
-	0x1373fb17, 0xf9f0ecb1, 0x3ed9ba47, 0x88972aec, 0x4071cdee, 0xf92a3f74,
-	0x410ef68b, 0x0ed68eff, 0x5a5bcbb6, 0x84be18bb, 0x55bad073, 0x8d10dd7c,
-	0xc067f9df, 0x131ffcef, 0x01f4a3bf, 0xadfb03a3, 0x4e3c07da, 0x1180ff85,
-	0x2b4cf4c2, 0x27e225f1, 0xfae24ba1, 0x2120b93a, 0x138fa9a0, 0x738e52fe,
-	0xcae9f13c, 0x37aabb19, 0x98792148, 0x311d0b1c, 0x0ed7cc49, 0xc41daf85,
-	0x22ff2ad7, 0x11ea963f, 0xc49d6fcf, 0x37e0437e, 0xf3c0bfc4, 0x3bba78a8,
-	0x881baf1a, 0xabc1a78e, 0xc607feb6, 0xc7fa276b, 0xaf8237a4, 0x653778c4,
-	0x77f9e346, 0x7c555e0a, 0x7fe4536f, 0x236f3c38, 0x7f9ea73c, 0xb4cb6f3c,
-	0xf891b8f1, 0x453ece1e, 0xf75d47d2, 0x7e5a7210, 0x2d3a722e, 0xdff8aadb,
-	0x461677e8, 0xa26dfdd3, 0xf74359bb, 0x53c8339e, 0x4f298fcf, 0x848b7891,
-	0x3ab8128d, 0x3fdfd12c, 0xdf561ccb, 0x4e3c179d, 0xf8d6ce0a, 0x75bf9367,
-	0x29b3fc6b, 0xfd696118, 0xe5349bd8, 0x9aadeb3a, 0xada697f6, 0x6e5fd4d5,
-	0xbfa9af5b, 0x4d01ff32, 0x63c76af9, 0xd3e67e11, 0xe77afa9a, 0x73f5346f,
-	0xea6bb79b, 0x68f4b7e7, 0xfe7817ea, 0x78ab29aa, 0x1c0adadc, 0x356b6d2f,
-	0x65d3f12b, 0xfe03ab0c, 0x8b83125a, 0xdfd9070f, 0xd7b7f4ac, 0xafb24bb2,
-	0x32d1fd83, 0xc296ab9f, 0xcd9d8aaa, 0xb5f4126f, 0x2d78955a, 0xad5be18d,
-	0x3befd636, 0xee19f35a, 0xf128756c, 0x5dc3255a, 0x4e254ead, 0xb48c3173,
-	0xbb66af0b, 0x3d2164a7, 0x44bcbda6, 0xe980b807, 0xc167f87f, 0x77bc5a5e,
-	0xdce28ebc, 0x8e5eca35, 0xffb37f57, 0xe3afe436, 0x950726cd, 0x311fb77b,
-	0xf9a30ad8, 0x32b7ee65, 0x6cf8c338, 0x0d5fcb6e, 0x45cd67e4, 0x0863ba0f,
-	0xa59a9d39, 0xf7207e63, 0xcc2f5003, 0x05218336, 0xd9ecc1f5, 0xf80da392,
-	0x189207bb, 0x3f58dcfa, 0x133e0f4d, 0x7a2deb96, 0x979e299f, 0x3fa332e6,
-	0x132c4b3d, 0x50f07a4c, 0x7324a43d, 0x7d0d7e9c, 0x383ca1b4, 0xbf18b865,
-	0x1c3f22cf, 0xe96f5dfb, 0xbddd9030, 0xfa2fe76e, 0xb87ac36f, 0xf1ce53d3,
-	0x25625c3d, 0x3e792dfd, 0x371a9dd6, 0x3520bcbc, 0x5f1850e1, 0x4e19254f,
-	0xe1d1f8a5, 0x7adc5277, 0x9cf1c193, 0x05dfba2d, 0xc9a77eca, 0xc16ffb12,
-	0x4dde4dd7, 0x713e4852, 0xb84d3b7f, 0x01e226cf, 0xc1b367da, 0x7e445797,
-	0xb3f676f6, 0x16d72a9b, 0x2e9a9d11, 0x15313e91, 0xa69de285, 0x8fd92f96,
-	0x91cfd48f, 0x90f14cf0, 0xfe656fc3, 0x93badfdb, 0x8b8d45f9, 0x5c7d5b7a,
-	0x6ab80b2e, 0x39a3e3c3, 0xa64dff93, 0x4beaa7b8, 0x3c4cff11, 0x53fbdce9,
-	0xd5a077dc, 0x17e52fff, 0x9a82bcd4, 0x5bcc8867, 0xde647aa8, 0x6e0975ad,
-	0x2c9aefdc, 0x94f30651, 0x5ea3a674, 0xdedf5540, 0x9765159a, 0xbd3ac8ef,
-	0xffd6d67e, 0x6cf9fac0, 0x4d31bff9, 0xbe48d5d8, 0x05e337df, 0xe553ad03,
-	0x9ffe48ef, 0xfe707d43, 0xd7924d39, 0xf67a7a83, 0x44c37692, 0x7df9dce9,
-	0x88a0e5b9, 0xc2ed238b, 0x3607b6f7, 0x2b5c9ba6, 0x92617c73, 0x1e50726f,
-	0x4743a544, 0xcf3add34, 0x1fceb740, 0x76d16e93, 0x73bce0f1, 0xf1a08bb3,
-	0x8acbdfcf, 0xc83e27f2, 0xa91fbd3a, 0xf781ffad, 0x636b1d6d, 0xef4472b8,
-	0xea27593c, 0x01627c45, 0x80eff21d, 0x74b8e657, 0x3c7b6669, 0x195033c5,
-	0xb77d278c, 0xf2065bac, 0xd4ef410f, 0x5cfe468f, 0x1f67f0a2, 0x7e243ef8,
-	0x7ef7055c, 0x25980941, 0x22ae4bd5, 0x09f4b73d, 0xfc4f0843, 0x27f393af,
-	0xcb7e94ab, 0xda469d2d, 0xb567f2ef, 0x1a71d4ed, 0x1fc88a5f, 0x19fa5f57,
-	0x73f0ddb0, 0xa7556fde, 0x5977dfb6, 0x62872971, 0x084b1659, 0xa7d267ef,
-	0x1baec947, 0x5b27cac2, 0x3f20bf39, 0x9e03e0f3, 0xc4fa21b1, 0x71f14764,
-	0xf9e9f65c, 0x23ff5b58, 0xf71cb1f3, 0xf9e891ac, 0xbf78f97d, 0xeb4599dd,
-	0xa0f3f556, 0xc4c379de, 0xdca0677a, 0x37a4f226, 0x9e2daefd, 0x3804e4f8,
-	0x2a161d88, 0x6a85d2f9, 0x369d74be, 0xcfb93a5f, 0x49b979c7, 0x716dbd07,
-	0xbd89f748, 0x55dbce1e, 0x59b776ed, 0x5dd3fcb0, 0xa3fc994e, 0x64b96ff1,
-	0xdfeab75a, 0x484efea8, 0xbeb0e58f, 0xf66bbce3, 0xd53bebd9, 0x30f6aa2e,
-	0x06560ed2, 0xfec96bdb, 0xe3b6f84d, 0x2be7824d, 0xf7691eaf, 0x7a138bde,
-	0x57c1a8e2, 0x8cfc97be, 0xcf1c63d7, 0xaffaf441, 0xc67e16cb, 0x0302cf4c,
-	0x1f091fcb, 0x450cdbca, 0x764fae6e, 0xf54d975f, 0x99d0bd8a, 0xa3b2069d,
-	0x23df7275, 0xf95f12d7, 0xde1bce65, 0xbf07c77c, 0xccedb5ff, 0xeb2685f9,
-	0x863ff671, 0x749a338b, 0xa2f8a6e0, 0x4a56d6a4, 0x6dc50c7e, 0xf3544794,
-	0x9fed918a, 0xc8acd7b0, 0xb5573ce6, 0xd9eb49df, 0x1c33d628, 0xbe5a9abd,
-	0x8731e4d0, 0xbba9bf9b, 0x4c30badc, 0x16ca5e3e, 0xdbd22ef1, 0xa21cc87a,
-	0xc5f2d9f7, 0x65f8b7ff, 0x091e0c9a, 0xe4a16ced, 0x082ffe15, 0xf80e783f,
-	0x2083ce19, 0xf9583743, 0x38216a7c, 0x17022e18, 0xdbbb7cc3, 0x60337c4b,
-	0xbe248e08, 0xbbf57fea, 0xfe9be202, 0x57b6278b, 0x5f3bf9c1, 0x06fff48a,
-	0xfe78dbc6, 0xdbbe5781, 0x7039fc43, 0xf4ace187, 0x6764eac6, 0xe451f127,
-	0x53bbcb79, 0x01d73e64, 0x8b967afd, 0x03e8ab7a, 0x1b72a497, 0xe64cd8eb,
-	0x1cde908b, 0x37aab4f5, 0xc2bf6017, 0xd7ac744f, 0xb5e49960, 0x80aed363,
-	0x70ac458e, 0xa657a671, 0x2fa8a772, 0x95e8995c, 0x15585cb0, 0x4a6fea23,
-	0xc52642f4, 0xcb960143, 0x0fac00f9, 0x8bd08017, 0xf7938237, 0x96419189,
-	0x6f17fd84, 0x3e709735, 0xa4390216, 0x8e288bff, 0xb74e221a, 0x2f7908e6,
-	0xbefa12ce, 0x179b46b8, 0xc95b30f9, 0x4a6bdb1b, 0xe7561072, 0x1d12f738,
-	0x1bfc938b, 0x7ca32a1e, 0xa1360e90, 0x75567d7c, 0xaa779f2b, 0x35ed1afd,
-	0xcdbf84bd, 0xe2bc7012, 0x9f7936e9, 0x238ce713, 0xf2cdcfc3, 0xa807b5ed,
-	0x7b5a11dd, 0xc578f0f9, 0x47f71c7e, 0xd78795cb, 0x1bb14c57, 0x43f1fbe7,
-	0xe5cbcf25, 0xebe679ff, 0xf80b3bfa, 0x7e43c14c, 0x7ddda372, 0x046fd79c,
-	0x9ffad0b0, 0x40147114, 0x47e50673, 0xd2653c97, 0x11f19f91, 0x03c8639a,
-	0xddc61bf8, 0xe31bff04, 0xc77f8267, 0x27e099f8, 0xfc133f18, 0x04cfc607,
-	0x1e3b7f17, 0x8d802283, 0x4e4b4e39, 0x301ce879, 0x1c86bd72, 0xf9c1cf81,
-	0x7f3c8dbb, 0xf8cddd9d, 0xebf7a41d, 0x9973a5e0, 0x0bc189cd, 0x6fc34e92,
-	0xf0dfdd03, 0x7870e9f9, 0x2325cf51, 0xe853bfeb, 0x67a9d45a, 0x15d45ffb,
-	0x6b086f88, 0x918e4177, 0x395f0beb, 0x1fe34f18, 0xd7e20eb5, 0xa796e129,
-	0x82f944e9, 0x08332d67, 0x677675bf, 0xe51bed09, 0x51f6833c, 0x83c1f5d4,
-	0x7c78cb13, 0x75a364ab, 0xb8e51f04, 0x911f6221, 0xb5f75078, 0x81bfd139,
-	0x257e6ffa, 0x7a82768b, 0x10dc8407, 0xed43491f, 0xcff32d77, 0xccb05374,
-	0x7e9deb8a, 0x0a1e6e4a, 0x29f675ff, 0x5477e78c, 0xc7cf537e, 0xe952fe15,
-	0x1df2ae76, 0x6b901e39, 0x6ae77e84, 0xb236a5d2, 0xc9e3274b, 0xee57ac2f,
-	0xe6757419, 0xf4fb47bc, 0x6ec194ec, 0xc8d63e63, 0x5f8562df, 0x6dd85854,
-	0x36bd1174, 0x59ca1f77, 0xe4fa6164, 0xb3f6c62c, 0xbc9aec72, 0x89d56167,
-	0xe14a1fc7, 0xea9a56f6, 0xceba783a, 0x60dfe38a, 0x6d36fede, 0x93f5ae69,
-	0xcf2c44ba, 0x1076934f, 0x9ccb605c, 0xe5a3649a, 0x37fd797a, 0x41d94fe6,
-	0xa3957522, 0x29b9fd9e, 0xecc264a4, 0x9639ad43, 0xcb071f0e, 0x4d64d675,
-	0x31b4d2f9, 0xdb97f69a, 0x57f535b2, 0xd4d38fe6, 0xe55ef3ab, 0x2bb4d528,
-	0x51660a4e, 0x60fb875c, 0x64e780b9, 0x7da25daf, 0x1c62beef, 0x3f3da796,
-	0xca6e41cb, 0xda7ea566, 0xd12f5a96, 0x69f10063, 0x70ea8744, 0x1f47fae5,
-	0xe222c1a2, 0x67eec686, 0xe76d3876, 0x130c3710, 0x7100ac2f, 0xdc5c3f8e,
-	0xa02f1910, 0xf4907cfe, 0xd7abf167, 0xdc70db58, 0x2e2755cd, 0xef3ee1b0,
-	0x8238c1cc, 0x47128dec, 0x833fc70c, 0x04d92272, 0xf0c8f4ff, 0x03fc10dc,
-	0x1f850bf0, 0x3ef69c05, 0xdf0533fa, 0x4a7dbf5f, 0x07f38dfa, 0x57efc51e,
-	0xafbe4460, 0x6f78e8d8, 0xdea7e50d, 0xf9ce8191, 0x03ae24e1, 0x77e81beb,
-	0xb0f7c439, 0x46bbe9e8, 0x0f77f0a7, 0x94aba6b9, 0x731fdffc, 0x71aabf14,
-	0xcba35dfb, 0xf370f542, 0x70f69a27, 0xa6b774bb, 0xb6a6677c, 0xbb94ef7c,
-	0xe70ffbc3, 0x5c6c3597, 0x9ca37460, 0x392c3c36, 0x8be843bd, 0x28a4f5c1,
-	0x097ba1fa, 0xdb43dbeb, 0x716d1997, 0xe157edd1, 0x6cb79478, 0xaadec618,
-	0x193aea7a, 0x7faa879a, 0x71cf9d47, 0x08fbe77e, 0xcdf64f71, 0xc3b09af3,
-	0x8db8251f, 0x2fb27ce1, 0xf47b9c47, 0x1dc0f63f, 0xee79d35f, 0xeabe22eb,
-	0xa3f6144f, 0x9d33f3a8, 0x08f1610e, 0xd6455fc1, 0xd2ec8e80, 0x0f58d2c0,
-	0x2d359ca0, 0x8ae8f38b, 0x7e088fc9, 0x5e4f1e68, 0x9a0f2dc7, 0xeb1fce91,
-	0x3cbb1a74, 0x9616c140, 0xd9fd9efb, 0xf7e93b8c, 0xe92f7102, 0x2fb3ed7c,
-	0xad7d8407, 0x1e637a11, 0xb7629ff1, 0xd3565500, 0xc768305d, 0x5e10cf48,
-	0xbf6b9ca8, 0xc987fdf5, 0x7a11efcf, 0x370af283, 0xb4e05fb0, 0x1d0df368,
-	0xbbf8e72c, 0xd73efc2d, 0xb78feb59, 0xf3968dda, 0xd84647a8, 0x218779b5,
-	0x57fbc5f4, 0x5e9b3d22, 0xd05ef997, 0x04f6adb1, 0x911fd308, 0x28da6c78,
-	0xe5ab9cb3, 0xcbe55ba3, 0x830f6cbc, 0xd185f519, 0x83a706f8, 0x55b57fe5,
-	0xd27ab7cc, 0x4ec83337, 0x8bd6eeaf, 0xcdc32f4b, 0x5b064eb3, 0xb79b3cd8,
-	0x5d929699, 0x603fd753, 0xf749f455, 0x0a534957, 0x843b5c04, 0xc0bf457d,
-	0x417e4290, 0xecf1c4bd, 0x3551ee9e, 0x123da784, 0x3c256cf8, 0x5c6635c4,
-	0x1c314cdf, 0x5e50b77d, 0xf9f2d214, 0xd71aa59e, 0xacecf1aa, 0xf27659ee,
-	0x5cec3f63, 0x072907b8, 0xccd9ec93, 0x8782d74f, 0x893deefd, 0x93ca74ae,
-	0x3fee534c, 0xf60c49ec, 0x67bdbf91, 0xf744ac52, 0x3bfc7019, 0x5f757c69,
-	0xf4ae0c7b, 0x9297de66, 0x44fe752f, 0xf67b153e, 0x67aaa271, 0xa7dbe4eb,
-	0xf7e7495c, 0xf14ac073, 0xf85974ec, 0x2147f0d5, 0x6d5eaacf, 0x6c49fc92,
-	0xa633edaa, 0xa34f11db, 0xe4a97e5a, 0xf735db7d, 0xafd6cf00, 0x5fa38c1e,
-	0x567f9894, 0xb1bc4439, 0x47f3faaa, 0x57f9c5ae, 0xfe4fbc61, 0xedaec2dd,
-	0x917f08fb, 0x7c60fdf1, 0x7be62ff5, 0xd733e3a3, 0xcddfda32, 0x73df1c77,
-	0x69c7442d, 0xea817183, 0xcb173e5f, 0x58a8d6e7, 0xfc287c85, 0xee5b647a,
-	0x7f5835de, 0x66062fe4, 0xfd2737d7, 0x58ade8ea, 0x58b9f9be, 0x2491f3c6,
-	0x391d90f0, 0xebcf29b2, 0x744b06c1, 0x6fb25ec1, 0xcf8e25b0, 0x327b3e69,
-	0x512fb7ef, 0x76b7f27e, 0x7e4843f6, 0x7cc2e86c, 0xe88ff746, 0xb9a3cbfb,
-	0xbcc5b81f, 0xca5c8a0d, 0x5fde142f, 0x242ff54d, 0xa5427e73, 0x6327e1df,
-	0x7dac149c, 0x2b22be05, 0x92e7deb2, 0x5bdd10e7, 0x697ba15c, 0xf97c84bf,
-	0x06f708d5, 0xc7f2f7da, 0x89c3f3ff, 0x17da9fb8, 0x1555feae, 0x07d96fae,
-	0x84e340a9, 0xdfb43ae8, 0xb66b6c70, 0x3f057f90, 0xf18c5e2b, 0x27d30c1e,
-	0x35123b2b, 0xd1aea6e5, 0x7a6183de, 0x729ef068, 0x04e7c4a3, 0xed5c8a8d,
-	0xeddbba37, 0xfba5d794, 0x713f4ca9, 0xce84b51f, 0xf7ff08ab, 0x91ff1899,
-	0x5da2f67c, 0xf3566739, 0x4e60c93c, 0x0b75b923, 0x97dc0dfc, 0x31e289b7,
-	0xf1493d9f, 0x33b9823b, 0xb3f9c30a, 0x9c1bd577, 0x7b8931e7, 0x9f43318f,
-	0x13da77eb, 0xf9837db9, 0x699e4d4b, 0x4d09cb55, 0x015567fe, 0xd2501fb0,
-	0x89bd2b66, 0xba1487ce, 0x7aee9fdc, 0xf1def18d, 0x18bbabc0, 0xf2dc4f9f,
-	0xd3bbcd31, 0x5d83f4c2, 0x11163c4a, 0xbf98356f, 0x69efe450, 0xe87e7f8d,
-	0x9445bdb1, 0xcaf438ff, 0xd3ca22b8, 0x87fd942e, 0xf7c99d7e, 0x86dff69c,
-	0xf7cecb70, 0xb91e2f39, 0x0c7ba8de, 0x8d43d092, 0xba648fb4, 0xc77ae3ff,
-	0xf42e72ce, 0x850d81c3, 0x1f353f8c, 0xe864703d, 0xa75d5078, 0x3ebabe3a,
-	0xddb57c75, 0x5f22ecdf, 0x17f46fd0, 0x415ffd91, 0xfb6130e7, 0x17f78fea,
-	0xbbe85a25, 0x4913f855, 0xb7e30e58, 0x2abcf57f, 0xf06a7cf2, 0x47c9565c,
-	0xfdadd3ed, 0xaff91199, 0x8321e3af, 0x7eef5c3b, 0x752a73cf, 0xdafdeabd,
-	0xfd85ab7e, 0x2576939b, 0xe90e9f1f, 0x1deb0ed4, 0xb7bff23e, 0xc7e41c98,
-	0x905c9a27, 0x3469f88b, 0x9afef8fa, 0xe4d12fda, 0x7991efe6, 0x234481f9,
-	0x81e5bdd0, 0xf7fce554, 0x42bd602b, 0x9c16e871, 0xd756acb7, 0xd212c5bc,
-	0x2cfeaa87, 0x0bdf871b, 0x3ea91ee8, 0xdf2027e4, 0xdb6b1594, 0x2da3f687,
-	0xa0ae7bff, 0x6eb25963, 0x24b938c8, 0x1b65c857, 0x9e42c874, 0xa89d1d85,
-	0xbf0d1de0, 0xacd7ee1c, 0x40fcf452, 0x0743d9bc, 0x8ab713bb, 0xf513ab7b,
-	0x5104edbe, 0x124b400b, 0x89f4995d, 0xfab4baf1, 0x1cc86c9c, 0xd8e3cbb6,
-	0xc8504f2e, 0xccd4b77d, 0xf7435bf7, 0xc132fd5c, 0xd0c8218b, 0x413d5609,
-	0x4bc30324, 0x2a70c5c0, 0x0cbc3334, 0x015e19da, 0x02af0c1d, 0x89f8433f,
-	0x1ed80daf, 0xff656edc, 0x3a25f2e9, 0xd765cbb2, 0xcf97ed0e, 0x3c35f052,
-	0x57cb503e, 0xa63e3b9c, 0x8772f72a, 0x7cd8cbc5, 0x2f157be6, 0xec4fe226,
-	0x34de0317, 0xc0209382, 0x46264ce3, 0xdd78a6ce, 0x6b7ef7c6, 0xbae5c9c1,
-	0x6547c4b3, 0x1777adc0, 0xda97810c, 0x9e64f9a1, 0xb90327c2, 0xe951f8c0,
-	0x8dae48f5, 0x30dd2acb, 0x7b234c50, 0xc84f4d10, 0xc59675a0, 0xa7a71cd6,
-	0x5f3fb722, 0x7a8f5336, 0x66b4acb4, 0x5f90a90d, 0xe5154ee6, 0xd32f3589,
-	0xf3fb7d51, 0x71728a97, 0x81c1a94d, 0xcbdae85e, 0xfa825e66, 0x27dcadd9,
-	0xa011a337, 0xb672637b, 0x2b761738, 0x724dcaf7, 0x2fba5ae6, 0x580dba66,
-	0x0063b8df, 0x22d7ecfc, 0xb8bc91b7, 0xb37b1c45, 0x3aafd055, 0x2e4b7dd6,
-	0x2fb333d9, 0xb87486de, 0x28dd6d79, 0x18f79bb2, 0xa49ff8c5, 0x81bdc6da,
-	0xc49932f8, 0xbf7556bd, 0xc189ef58, 0xadb24072, 0xad0cc969, 0x59c75d4b,
-	0xe9d77bcc, 0x774fcde6, 0x023d206f, 0x15c70736, 0xbefb1463, 0x34c4cb65,
-	0x1d7030f4, 0x20475e56, 0x0b4d772e, 0xee91dd56, 0x1bc6847a, 0xf87c1388,
-	0x7529d108, 0x75cbe878, 0xc43b943e, 0xdfb581f7, 0xbd23eabc, 0x042e29f4,
-	0xae4df9c7, 0x475a71fb, 0x51902e93, 0x45fbf48a, 0x05007a2c, 0x9096be21,
-	0x0f107398, 0x1af04e6d, 0x77945e59, 0x99f9ca36, 0x8b03172a, 0x4fc43c71,
-	0x8b55cb99, 0xcc5422ee, 0x60937e6e, 0x16bdbba5, 0x179e686b, 0x724d3d68,
-	0xe4f881b0, 0xc607e268, 0xc76e594f, 0xf454fe0a, 0x9eb6f759, 0xa288c6db,
-	0xb2e4c20b, 0xaf89db69, 0x6f7486ff, 0x5071663a, 0x3e3c90f3, 0xe79c46b6,
-	0x46fa345a, 0x5d09d395, 0x9c383e26, 0xc5a2f5b8, 0x07d26ed4, 0xb7a4d9bd,
-	0xda06f727, 0xe81e7dc8, 0xc8463bde, 0x7fd7ea89, 0x7d8b9d23, 0xfc8cccf9,
-	0xf9104091, 0x839c5e23, 0x8af4fc73, 0xad5f0738, 0xeca93de4, 0x788b7de1,
-	0x573b8d54, 0xde2dbcf6, 0x6ff07985, 0x122bbd05, 0x713e967f, 0x6fc455e3,
-	0xd48bef91, 0x6949b478, 0x7bd7a2b7, 0xf227ed37, 0xc51351bd, 0xbfc345a3,
-	0xa27a6a37, 0xc8d1e396, 0xb9bd46f7, 0xb14afe4a, 0xa1f8a08f, 0xb436944b,
-	0x87c70b3f, 0xf709af46, 0x35c9fab6, 0xd3952b0e, 0xc7d60e2d, 0xe10e3d57,
-	0x6489e1ed, 0x9e5519e6, 0xd893ad97, 0x5af156bf, 0x49c9bcfc, 0x7e7e28eb,
-	0xe8cdfb14, 0xe97b8bef, 0xde913e4a, 0x837bd012, 0x2cc189cd, 0xb9ba67ba,
-	0xfe41df3b, 0x9d5a1ff8, 0x68430ff0, 0x503c6a7d, 0x4b54bf27, 0x2d8e87ef,
-	0x3f0b38c2, 0xa679eead, 0xd5e58ccd, 0x1055e9eb, 0x13f384a5, 0xdf2aafc8,
-	0xc6978329, 0xd543ef01, 0x39153b08, 0xc0e9a537, 0x188f8616, 0x0db008db,
-	0x29300f91, 0x4fcd8bf4, 0x39c7d4d2, 0x4ff4d02e, 0xd4d2cca8, 0xf788c5b7,
-	0xfa71e032, 0xef422a0b, 0x3f9d1248, 0x0083f4d1, 0xbd08adfe, 0x7e27b917,
-	0x4f7e4eea, 0x3ce06fe2, 0x2565f245, 0x7926f69a, 0x5dfc4cab, 0x435ea5fd,
-	0xa6529fcf, 0xb956f11b, 0x9c1cfd1b, 0xb69f4267, 0x01e0263e, 0x5bb317ea,
-	0x984bc9af, 0x85f2da6c, 0x629e4a79, 0xe4d58c2c, 0x2ef10629, 0x61d8fef8,
-	0x0545f31d, 0xbaaafce4, 0x006cf08c, 0x6f1a2daf, 0x5df840c7, 0x1c5ac6c7,
-	0x426a96f4, 0xc932cbcf, 0x8b4baa41, 0xb5b351ff, 0xd6ed1ff8, 0x52cc7be2,
-	0x9bd3be2d, 0xb0bef8b5, 0x4cd78b45, 0xd96f168f, 0xda6826eb, 0x346bdbdb,
-	0x578dbce5, 0xe45fda68, 0x8f29a19d, 0x4d7af17b, 0x858ec2fb, 0xaee2fa9a,
-	0x957a9ae5, 0x83e386cf, 0x11d5bef1, 0xdd03a6fc, 0x74a0f869, 0xf335cfe7,
-	0x9ff450fd, 0x05e8a79f, 0x2bd7fe85, 0xf8dde576, 0xb892f7c3, 0x7a158b4e,
-	0x50df3070, 0xee78e06d, 0x6d725b3d, 0xc505e91c, 0x7b14b9de, 0x894f3907,
-	0x1d9455b2, 0xa2bf717e, 0x36ab9f64, 0x2cf746de, 0x8a8afdc4, 0x09b5edc3,
-	0x1de23ed4, 0x494af4d6, 0xf91dde73, 0x67a66b2e, 0xd1209cad, 0x3f7144bd,
-	0x841ef231, 0xdeab3efa, 0x2739a319, 0x96bdee1f, 0x78c25f9a, 0x2f148c01,
-	0x3efccce8, 0x721fda31, 0x5fd9946c, 0xf6ffb373, 0x79cdc967, 0xfecc6ba7,
-	0xecefe20c, 0x79f5eeb1, 0x3aa3b788, 0x3dfd8d87, 0x00d6fde5, 0x2fdf8c6d,
-	0x3ca4ccf5, 0xbb8600e9, 0xdfd4d794, 0xbd2663b3, 0x5be5c45b, 0xac221503,
-	0xe68f3fa6, 0x71a41fb9, 0xbbd6480e, 0xbbefb14b, 0x20cf3e13, 0x73a2667b,
-	0xff3e12fe, 0xfc2f387e, 0xee147bfc, 0x406df50f, 0x79f0f367, 0x8e25cfee,
-	0xc1a73e53, 0x77e4c2aa, 0x4f79419d, 0xb9b6e22a, 0xb8d4be0a, 0xff328e6d,
-	0x29621c01, 0x5db9f3ea, 0xacbc667f, 0xe253eb48, 0x158766bd, 0xac71bfc7,
-	0x7bef84a5, 0x221d4b39, 0xb8e357de, 0xb1f7f231, 0x87ba67b3, 0x88ed22b5,
-	0x97869e26, 0x57cc8792, 0x42c5e646, 0x1fe316fb, 0x76cb1f58, 0x74fac0e8,
-	0xc6863fce, 0x85f9ca3f, 0xfbdacdb9, 0x3e5bf3dd, 0x02dff0d2, 0xfa9a27cf,
-	0x30d04a40, 0x781ff706, 0x1bd4f475, 0xaffd7f10, 0x9e282a98, 0xe4f5ba45,
-	0x0fc68795, 0x897797dc, 0xb4ce1bf0, 0x1d79cfcf, 0x5afdcabd, 0x5bfb9f75,
-	0xd03971f7, 0xefb8881a, 0xbfc4d1e4, 0x09fe342a, 0x0e8fc9f2, 0x431c234a,
-	0xe76673e5, 0x57a9388b, 0xabda7779, 0x55ed3bbc, 0x2af689de, 0x957b42ef,
-	0xbbeaa177, 0x9c095edd, 0x8e64bf74, 0x816a7ae4, 0x0f76efc4, 0x969b3ed1,
-	0x5de88b07, 0x60715363, 0xbbf3249e, 0x7df423dd, 0x45bb7788, 0x69f49592,
-	0x6ef435ea, 0xcf08f0f7, 0xd9d8b251, 0x50d789f9, 0x28d870bc, 0xc5f4a3e4,
-	0x7bd2666f, 0xdd53c7bd, 0x3fbf89c7, 0xf31f6495, 0x9f12ebf3, 0x6033832b,
-	0xef16719c, 0x13cbbf7a, 0xf32734e7, 0x0a89b9c4, 0xbd0be647, 0x9cb04a56,
-	0x2e6f72e8, 0x68dabbbf, 0x385777e2, 0x7617539f, 0x7df2221f, 0x4d1fc95c,
-	0x6a1fd23e, 0x5f2127de, 0xbbd3379c, 0xca675a39, 0x6ef126fd, 0xa0cfe02e,
-	0x0f747677, 0xbdf245ca, 0x1de29c1b, 0xf0a6de5e, 0xf90930f7, 0x45bd3dca,
-	0xb7a779a0, 0x7ec0e7b2, 0xe5af27d2, 0x53f393b9, 0x56c7ef43, 0x7f676fc6,
-	0xc6df20af, 0x797ae2f3, 0xee17a8ff, 0xc79cfa24, 0x7e56617c, 0xd7fff479,
-	0xf5bc3860, 0x5a3ff62f, 0xf77a1990, 0xaddef616, 0xaf2c3f20, 0x343faea7,
-	0x42e5e9ce, 0xe5a97bcd, 0x93dd8f43, 0x7486724b, 0x5948f911, 0x88633f9a,
-	0x05f3d3fe, 0x774feffd, 0x97f9a04d, 0x60bc8b37, 0x6fda6f88, 0xdce898f9,
-	0x3ef21963, 0x723fdabf, 0xf5b72b9f, 0x9f703e30, 0x617f68f3, 0xf08cbcfb,
-	0xbfb3eea5, 0x05a3ef7b, 0xdfdf73b6, 0x6e777df7, 0x6d71811a, 0x767950d2,
-	0x7e613eb4, 0x3fed4999, 0x8fedaf56, 0xb1e5390e, 0xd1de48bb, 0xe254e96f,
-	0xc4cbb21e, 0xee5daa17, 0x2920e254, 0x02ed83b0, 0x71724bcd, 0xfb61e4b7,
-	0xda3be6a8, 0x947fb424, 0x61af7057, 0x685f217b, 0x775f1071, 0x49f9ef22,
-	0x58cef41e, 0xc44773ce, 0x758b3fd7, 0xbc7844df, 0xa335aff9, 0xf2defe28,
-	0x38942b97, 0x72abd84e, 0x69cb3f85, 0x4147da7e, 0x996df302, 0x730abeb2,
-	0x55c9fb33, 0x5e4591e0, 0xac93c943, 0xdff1c1df, 0x141a01ff, 0x43d0aaaf,
-	0x000043d0
-};
-
-static const u32 usem_int_table_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x51fbff00, 0x03f0c0cf, 0x1894738a, 0x18357a18,
-	0x326b3618, 0x31686830, 0x20318830, 0xaf8568e4, 0x9fa65371, 0x8181959b,
-	0x81f98817, 0xd7881058, 0x6c303133, 0xff5e2260, 0xfb045111, 0xc303209e,
-	0x197f2051, 0x6614ee90, 0x64055860, 0x2fe2031f, 0x1080be40, 0x100c8303,
-	0x606115ff, 0xc1d20530, 0xc4036c40, 0x9bf145c7, 0x7c80827f, 0xbf2a08bc,
-	0x279f8d1b, 0x25ff5f8c, 0x0ff2fc11, 0xc363c808, 0xc7e41632, 0x7a052247,
-	0x29370207, 0xca8ff2a2, 0x543c3033, 0x51d06060, 0x919bf082, 0x6280ede4,
-	0xec21e4c7, 0xb8c09229, 0x28b5ca07, 0x2a773762, 0x5004fe50, 0x34894bce,
-	0x41d3dcf7, 0x8434afe5, 0x3ebc00d0, 0x03a8e414, 0x000003a8
-};
-
-static const u32 usem_pram_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xc5547c0b, 0x3d9cf8b9, 0x926eece7,
-	0x2126cddd, 0x26c2bc21, 0xb80d4401, 0x41a00c40, 0x94520f37, 0xa2a1e1a8,
-	0x24786c22, 0xf622ef21, 0xddbf1f62, 0x52c488f0, 0xd4c51f1b, 0xb051768b,
-	0x40368bd1, 0x5c1758d0, 0x6d8b459e, 0xd5a045e8, 0x5e40137a, 0xa540b206,
-	0xcffd45b6, 0xdd9ccdf7, 0x26364e73, 0xf6ffef6a, 0x9fdbfffe, 0xcccce61d,
-	0x7cdf3337, 0x9be6bdf3, 0x91be6489, 0xf21387d8, 0x256efc25, 0x108951e4,
-	0x9b4e1892, 0x9fc6933c, 0xedb10994, 0x3bea247e, 0x9e0c8499, 0xd146706b,
-	0x64085fa2, 0x21064b4e, 0x758d65c9, 0x793dfa46, 0xe8bc7d91, 0x9819c308,
-	0xbdbae47c, 0x720c8409, 0x8266f6d3, 0x7fe92fbf, 0xc637b73f, 0x79c87491,
-	0xe131a285, 0xbc9a4afa, 0x877bfa48, 0x149bbeaa, 0x48dda675, 0xfd51fbfb,
-	0x9085b720, 0x4678c31f, 0x40cba942, 0x78b8e8b2, 0xfd2e6f5d, 0xaf0e3a3f,
-	0x295be8cd, 0x1c1a2210, 0x242444b1, 0xa0482326, 0x679fbe9d, 0x49d7ed3c,
-	0xaa36a708, 0x49e74ac8, 0x0896b4c8, 0x808972f5, 0x76cd8878, 0x78e97b25,
-	0xe22e7d57, 0x220d57bc, 0x27d69da4, 0x684ed392, 0x61c4953a, 0x232dc7bd,
-	0xd57e4206, 0x07123fae, 0x199b1b85, 0xdc155e24, 0x0e210f06, 0xc7afc513,
-	0x8f2ae98c, 0xc4c9a79d, 0xab210d71, 0x574c0e3d, 0xfa634679, 0xdb27d0d8,
-	0xf9d00673, 0xe9d8320c, 0x63834848, 0x1191dda6, 0x2dc72786, 0x0938e730,
-	0xae2926c9, 0x2f5a54c4, 0x4dc840d1, 0xf342dc84, 0x19082375, 0x5084ec49,
-	0xbc933dfc, 0x019dca2c, 0x45e60779, 0x7cc37103, 0x2e033263, 0xc62de291,
-	0x1c95cf69, 0x1bf8efe1, 0x785fdf80, 0xc1d6152c, 0xefcc1b7d, 0xf0ece219,
-	0x46dd9e02, 0x7f5a26e7, 0x5e4ceca5, 0x468ae14a, 0xad832eda, 0x1e1094bb,
-	0x1fc04cdf, 0xc9cc8fed, 0x30d7acd5, 0xb4224718, 0xeb05dc73, 0x75b27164,
-	0x1574095a, 0xf2e61d61, 0x77655875, 0x38fd19d9, 0x11fa2449, 0xb1fa5aed,
-	0x8fe96864, 0xba9fb17e, 0xbf69e79e, 0x3bed424d, 0xbd3ce953, 0x4dce0c4b,
-	0xa160dbf4, 0x0af80051, 0x80c425bc, 0x41f92afd, 0x63a05265, 0x179e1ab4,
-	0xf6f7e9cb, 0xefcf730e, 0x52e2062d, 0x2a5372e8, 0xcec4777c, 0x6626e3a0,
-	0x6b4cec47, 0xe987f1cf, 0xc925d924, 0x4c0eef40, 0xac47041b, 0x477ce300,
-	0x9c049b24, 0xf6a4727f, 0x08edd3ff, 0x377ae1f1, 0xda5475f0, 0x3d203c51,
-	0x468b1f79, 0x3450883c, 0x17e70c39, 0xad17cf1c, 0x4a434f45, 0x5868e348,
-	0x875f9a5f, 0x79a663f4, 0xb09be62b, 0x3fca1edc, 0xacc9e58b, 0xba5e5d3e,
-	0x55e3bd18, 0x6eda1759, 0x4291c203, 0x38445e70, 0x9bbf5096, 0x94203f30,
-	0x1fd625ff, 0xb7f7eaca, 0xceed251f, 0xf9c29e0d, 0x003b2ebf, 0xd6dbc29f,
-	0x2e94adc0, 0x7c106e0e, 0xec0f9a26, 0x75fe418c, 0x9f0cfd7e, 0xd767e289,
-	0xea0b9338, 0x8398df9f, 0xefedbcf9, 0x5e5a24db, 0x20945db5, 0xd679d86f,
-	0x5bf141d6, 0xfc7f6a63, 0xb83dfa66, 0x602f245d, 0x9f71d377, 0x48b4e29d,
-	0x92f9633e, 0xdaad9628, 0xc01e6bb0, 0x91336b2d, 0xeaa70a28, 0x6f3bd2cd,
-	0x03d2f9a6, 0x552a8132, 0x838cea9b, 0x4f897e69, 0x8afc8168, 0x3f601f9d,
-	0x0ca4b9dd, 0xe039f7f6, 0x752f945b, 0xee93dadb, 0x7dcbdfa6, 0x7ea00a5b,
-	0x09c166f9, 0x7ebe5c4b, 0xbf0087d7, 0x211e55bc, 0xcd15f852, 0xdaa1c431,
-	0x17db792f, 0xade309df, 0x9426477a, 0xabb291ed, 0x1891190f, 0xe02346a4,
-	0x13d36ab5, 0xe79be046, 0x1fb0073c, 0x2f559f05, 0xbb687ed3, 0x2704d7ea,
-	0xc0daad4c, 0x3785cdf8, 0x68bce6a3, 0x19d57981, 0x37fb4147, 0xbd42351f,
-	0xebf15f52, 0xdf180e51, 0x8c016306, 0x6306fd73, 0x566f8a89, 0x3356ff34,
-	0xe94d53ae, 0xbd19dd03, 0xce39e7af, 0x397c95b7, 0xdf484015, 0x4338cf92,
-	0x339e87c5, 0x57fd21c4, 0x11c48b34, 0xdf781f81, 0x8760fbe7, 0xbe03f195,
-	0xc0ed4b5e, 0x75ebc21a, 0x4fd7cec9, 0x88cd660a, 0xe71ee7c0, 0xcb91a3f2,
-	0x7e41278f, 0x2e69f4d0, 0xf971d63f, 0xe271e4d1, 0x933d67f7, 0x71ef5d30,
-	0x67bcfa61, 0x4f3ea61a, 0xc17bd611, 0x8dd30733, 0x7f7e371e, 0x698653c9,
-	0xbf16a7b3, 0x8e59e2bf, 0x178f66e9, 0x59e6bfbf, 0xa78b6983, 0x9eadd311,
-	0x3d5b4c26, 0xbaf7ac3e, 0x36d319a7, 0xff7e0b4f, 0x530da7b5, 0xe98027bf,
-	0x9a5f584e, 0x98ed3c06, 0xc31cf6ee, 0x03a7af74, 0x9cf7eddb, 0xc72d74c1,
-	0xe49b2dbb, 0x366f1448, 0x18394117, 0x91cae85f, 0x88be3e69, 0x7ae693e5,
-	0x9f348c73, 0x8a79a6e4, 0x8195c1c7, 0x0fcd131c, 0x29e565ae, 0x66b9243f,
-	0xb2f14f9a, 0xaeb5b4f2, 0x4f9a28dc, 0xa3e5646b, 0xa3737bd6, 0x8f947e69,
-	0x39b75f95, 0xf3431b90, 0xf2b0b5d7, 0x67927eb1, 0x01b1f9a1, 0xd07f1f96,
-	0xf9a56795, 0x9f2cedf1, 0xcf37a1f5, 0x1d59f346, 0x5d4dfdac, 0x9a58bc81,
-	0xcac829bf, 0xf24ab96f, 0x2e4003ed, 0xb5cf980b, 0xd1c7e4e4, 0xe59dae7c,
-	0x4b16860b, 0xb7f4088e, 0x0858ee53, 0xb0867c22, 0x7e5125d1, 0xf1d8d3b3,
-	0x647d1510, 0x4baaf0a1, 0x2033fca2, 0xfe504593, 0x963af0b0, 0x19648c07,
-	0xbc2a3f94, 0x65bbe58d, 0x5cff9607, 0x46f2c038, 0x87ff9607, 0x7bf30870,
-	0xef961765, 0xf2c4fe10, 0xff961746, 0xf981385e, 0xcb1bb2fd, 0x962e853b,
-	0xfcb1ba37, 0x5753e949, 0xdf2fed3e, 0xdc2e9ee0, 0x5ddb7208, 0x6a597286,
-	0x597e0649, 0x04fff9cf, 0xaf2d0640, 0x3944641f, 0xacf3f3b8, 0xd3814517,
-	0x97c800f6, 0x05fa04bc, 0x485b3385, 0xc2827d04, 0x7386fb11, 0x349317cb,
-	0xa2f96e70, 0x20f3814c, 0x1fea89c2, 0xdc5f9d9c, 0x17cf1da4, 0x129c0ae5,
-	0x7fb5979c, 0xcbe5baf3, 0xbe78ed6c, 0xd4e054ac, 0xfeb89c20, 0x4f20278d,
-	0xc809c0d4, 0xe59c0aa5, 0x7fb12708, 0x271971e3, 0x8cb8e06b, 0x7538144b,
-	0xff506708, 0x378c04e0, 0xac63c76b, 0x863ce050, 0xbfd61e78, 0x534cb979,
-	0x5531e3b4, 0xc29e7029, 0x0ff6a4f1, 0x16ab6ece, 0x21adbb3f, 0x3847acfc,
-	0xaf37fb23, 0x3f169b5c, 0x7e10b6b9, 0x6b9c2136, 0xb76707fb, 0xdd9f8b4d,
-	0x5e7e10b6, 0xe98cfc43, 0x6372bcdf, 0x8dc9f8b5, 0x0de7e10d, 0xfeb8cf1c,
-	0xa26f678d, 0x137b3f16, 0x2009f843, 0x37fb1b9c, 0x2d24fc9e, 0x4293f27e,
-	0xe10779f8, 0x9c1fee4c, 0xfc5a49bd, 0xe10a4dec, 0x67080fe7, 0x95e6ff4a,
-	0x9f8b503f, 0xfc2181fc, 0x7270807c, 0xa94ccddc, 0xbdac70a4, 0x4c3fd9c3,
-	0xc3fd9f8b, 0x8939f842, 0x3852a670, 0x29c37de9, 0xa7e2d148, 0x9f842520,
-	0xb6e708f3, 0x9fd9c1fe, 0xfecfc5a2, 0xae7e1094, 0xfa3b9c20, 0xe182af37,
-	0x0c14fc5a, 0x55b9f867, 0x8672871a, 0xd8274eca, 0x9a19dfe7, 0xc13212e3,
-	0xd179624e, 0xf7a024ee, 0x433e8a88, 0xad225dda, 0x371cd96f, 0xd6a231fe,
-	0x068d726b, 0xaa56cf4a, 0x9af5a9e5, 0x1ad149d8, 0x15ce2a3d, 0x4c27c9af,
-	0x9fa9ac1b, 0x29a69458, 0x3ae7381f, 0xf720f94d, 0x487e4d78, 0xfa9a4dd9,
-	0x35736ac3, 0x6fcbe1f9, 0xf54fd4d7, 0xd3e4d4ce, 0xa9afdcd7, 0x8171b23f,
-	0xa69afca6, 0xb5f94d72, 0xfc9aa5be, 0xd7dfcdf5, 0xb2d31fd4, 0x437e5342,
-	0xf29a63db, 0x35278171, 0x9e0709f9, 0xb1bfd4d5, 0xf94d05fd, 0x68af63c4,
-	0x6c7727ca, 0x3e6fe4d5, 0xfd4d6bf3, 0x9addc129, 0xbd9fadfc, 0x439fa9ab,
-	0x6fab53fe, 0xd4d03f9b, 0xa13f6a9f, 0xf24eff29, 0x553d3a27, 0xccaf1f6b,
-	0x32afcc21, 0x01afd988, 0xc6f311ab, 0xa76616c1, 0x271c4b58, 0x7718fd29,
-	0xa00c742f, 0x033403f4, 0xe0ce5176, 0xe83a6bb2, 0xe4ddeff7, 0xbf4ec6be,
-	0xbee8cf7f, 0xbf411ec1, 0x9026f4a1, 0x061d4864, 0x8fe5f548, 0x73de8cca,
-	0xd51d5c87, 0x18d7db49, 0x68e2a382, 0xe73123fe, 0xf9c7a03e, 0x83ee0306,
-	0x42d49168, 0x411368bd, 0xd4d1e9bb, 0xaabd17ac, 0x1866b0fd, 0x308433d5,
-	0x3bb235dc, 0xc328f519, 0x9bd03af8, 0x79d187ea, 0xd164260d, 0xbcbb718a,
-	0x61fb6823, 0x8fe0c925, 0x3f991930, 0x91bfd424, 0xfd819ff6, 0x6bfe812f,
-	0x94dfe97a, 0xbfd34936, 0xd34ca539, 0xfb48d9bf, 0x90f213b7, 0xbfde26e1,
-	0xcb36fd19, 0xfec64c56, 0xd865294d, 0x6a46a3ff, 0x8ffba977, 0x88fff50e,
-	0x31ebf681, 0xc7b9bb30, 0xd26ed3fc, 0x5ca53fce, 0x9b237f3b, 0x2e434aff,
-	0xe71a3fef, 0x0e456abf, 0x394a7f9b, 0xc189bf9b, 0x0b6ff50d, 0xfa01bfe1,
-	0xfd2f69ff, 0xb5b3d29b, 0xa95e1ff3, 0xf589bf9d, 0x76e194ff, 0xfb05bfde,
-	0x6dc57a7f, 0x2bc3fe6c, 0xc9a37fb1, 0x31fa04ed, 0xf5ae890e, 0x50c9fed1,
-	0x040d256a, 0x40fda172, 0xfd1e3a3a, 0xd21a7708, 0x8bdf1c70, 0x2576f466,
-	0xf21bd29a, 0xc3b32f33, 0x5273947d, 0xd39aaabb, 0x1ce6c57a, 0x2c3df023,
-	0x3164224f, 0x36a2ea1f, 0x3c9be911, 0xa48df26d, 0x26d0bde3, 0xe8bf217a,
-	0xe03e29e9, 0x322635af, 0x49da08bf, 0x3fdf0024, 0x1798d9fe, 0xa7d2f3d4,
-	0x53e51b8b, 0xde45fc91, 0x96ba325c, 0x1002ef8e, 0x9c7f2a81, 0x186071da,
-	0x1eed487f, 0x139fed42, 0x23efeb32, 0xbe41ef6a, 0x687bda83, 0xe63a9338,
-	0xdebaf357, 0x5fc7411f, 0x0b9f9444, 0x6e2f79e7, 0x624f0a29, 0x5af8f7fb,
-	0x31eb07c1, 0x450c797f, 0xc53c787e, 0xbe4d04de, 0x07eac4c6, 0x2f7c136f,
-	0x0dc30808, 0xe1c199f8, 0xcd2f1811, 0x36b3b1cf, 0xb1de7747, 0x7dd1b05f,
-	0x5d0866b4, 0x599c308b, 0xa40f25c4, 0x565eefed, 0xa76b832c, 0x8186105d,
-	0xa166b09f, 0x3768024c, 0x0649137b, 0xde3a0e27, 0xfe0cedfb, 0x527c970c,
-	0x239b47ed, 0x74455d9b, 0x458a733c, 0x69acff1c, 0xed3ff2da, 0xc619718c,
-	0x53cd74d2, 0x45ddcfd8, 0xe77bf2da, 0xb9f7f368, 0x572a79b5, 0x0fab9065,
-	0x53bfe994, 0xdf8124b4, 0x001bf431, 0xe3907ce3, 0xd95ac1e1, 0x6a5759ab,
-	0x72951b76, 0x09b88470, 0x8bdb0bce, 0x5fcfeb3d, 0x7b17cdae, 0x6b85f9b5,
-	0xdd39f074, 0x7febe29c, 0xa683e81c, 0x283e81a7, 0xfa724f3e, 0x2d55f308,
-	0x9a13dc7d, 0x650fa306, 0xb624a71e, 0x33d6a704, 0x18dc58fa, 0x8a1e9913,
-	0x52e0f443, 0x0f4297d3, 0xfc3d38f3, 0x6943d399, 0xeeae9693, 0xc9d5be23,
-	0x6b03fdb4, 0x1d3ae177, 0x3d198a11, 0x87a140fc, 0xb83d0d0e, 0xd7e83d39,
-	0x87a71e6f, 0x7a308f79, 0x0767afd0, 0xa68e87a7, 0xeb4932cb, 0x1d74aeb9,
-	0x0eba7934, 0xa3b775ba, 0x47ae8a1f, 0x10587a44, 0x389d379a, 0x65e42fcd,
-	0xd38bd63d, 0x01a79603, 0x09e209da, 0xacf7a7db, 0x2684f94f, 0x7914da5f,
-	0x36da6bfd, 0xfaa93dac, 0xf2f2d55e, 0xbb7fb55a, 0x268b79a2, 0xa6f7c4bf,
-	0xd3697ea6, 0x717e4d2e, 0xfa9a3be3, 0xd21cd70b, 0x7fbd8be4, 0xbf9fd4d4,
-	0xfe5353bc, 0x4d59ed60, 0x176503f9, 0xdcfbf935, 0xbfd4d37f, 0x13f08e77,
-	0xa2eefe75, 0xeba89fa8, 0xa7169acf, 0x0d70cfc9, 0xec37d4d2, 0xa02ef6bc,
-	0x8bef83c7, 0x4f8ff404, 0xffd1a79d, 0x7653a9f9, 0x1e939d42, 0x5383ee07,
-	0x9e98d19e, 0x9f7138f1, 0xc24cf39c, 0x1edb42f4, 0x2a15c80b, 0xc8e04b47,
-	0x96e574a6, 0x20d935ba, 0xdfca09d7, 0xd46f958a, 0xb2128779, 0x8a639414,
-	0x2326c2ef, 0x44204c09, 0xc7c4e100, 0xe5551415, 0x37947d1d, 0xd0914151,
-	0x23b0bcb3, 0x279af7f2, 0x23db878b, 0xf7847f9c, 0x7a021935, 0xe72f7752,
-	0x29029524, 0x64277f52, 0xad81f205, 0x34a94f5c, 0xb9517e32, 0xb12e5075,
-	0xaa303e41, 0x6bfaabf6, 0x206c9ba1, 0x66ba49d0, 0x5d36973f, 0x04f7e1af,
-	0x4089cfbc, 0xdf34136f, 0xd66f9a2b, 0x25daebb4, 0x81abb8e2, 0xfdb95097,
-	0x527a292a, 0xd8153e04, 0x0c6b3293, 0x14f5d38c, 0x5112dbe6, 0x34f2ec8f,
-	0xc7f385af, 0x4c169e73, 0x30da78cf, 0xac09e53d, 0x93c07385, 0x1e98039e,
-	0xda63b4f7, 0xe98639e1, 0x4c0e9e47, 0xc19cf43f, 0x209e4ff4, 0x9f3cc7a6,
-	0x43c47a61, 0x0e70027e, 0xfe98cc7b, 0xb4c763c1, 0xe98c93dd, 0xfb0f8f05,
-	0x5f5df651, 0xcb867774, 0x7f4073ed, 0xbb6ce811, 0xcd6eac78, 0xbd9d30d0,
-	0xa423f2b9, 0x85cf0533, 0x0f4e264d, 0x087a1a49, 0x2377ed80, 0xe51f4bd0,
-	0xc3a7324d, 0x2e47dade, 0xbfe179af, 0x7caede87, 0xd30b7a4b, 0x3d1d10d3,
-	0x4f45f7a5, 0xe9e9aa1f, 0xe4cec18a, 0x1fa7a720, 0x7d6b73f3, 0x3b1251bf,
-	0x77e90ca7, 0x800cdbae, 0xdcfca5aa, 0x98699084, 0x5efbc4bf, 0xa3b5c149,
-	0x0d1be81e, 0xe8d2eb72, 0x73828fbf, 0xe8c74b87, 0x3ef6a7e2, 0xf49d3d3f,
-	0xda17778e, 0xba3e2543, 0xc61109e8, 0x1af0cd1b, 0xc8d32065, 0x461a4278,
-	0x905ce4be, 0xc4897981, 0x739f7b43, 0x3af38446, 0xc06b7542, 0x5d785f6f,
-	0x1632bd69, 0xf67a9de0, 0x5e90591f, 0xf475fae1, 0x7cf5111e, 0x09d17812,
-	0x25c90df8, 0xfc193393, 0x4691c1f3, 0x6409ea3b, 0xde7f16ba, 0x6bf835db,
-	0xcfce5548, 0x7f11931b, 0x1a8cae23, 0xf5fc0fd4, 0xc2fbdfc5, 0xf79802e7,
-	0xfb3e037f, 0xf17d8fe2, 0xbc72e245, 0xdfe746d6, 0xf8cc73bd, 0x07c01cc7,
-	0xcadf1abf, 0x3c7e9c79, 0xb5f492f9, 0x493bb8e8, 0x14f6e3a1, 0x24d85b88,
-	0xa5fe11da, 0x61626bd6, 0xfa70425d, 0xede14f58, 0xbd80a73f, 0x0b553e7f,
-	0xef074b2f, 0x6d1781d2, 0x4d2d7760, 0x3270d85e, 0x69283ac2, 0x835d4b55,
-	0xb687ad45, 0x1a97f369, 0x382d6985, 0xecec472e, 0x6a272031, 0x5edf181b,
-	0x6702a98e, 0xf6097269, 0x3d39ae73, 0x3e7bd996, 0xc7360fc6, 0xe738bf21,
-	0xfffac329, 0x06f4f1ec, 0x210f1947, 0x1984e4ad, 0x4b2d31f8, 0xaf7ebdef,
-	0xc5fd2cf4, 0x7edde788, 0x89e80af9, 0x97dffa66, 0x09107760, 0x9adc0af3,
-	0xba6bd116, 0xd66fbe01, 0x39db47f4, 0x2fe23394, 0xdf6abed3, 0x4294e448,
-	0xd45e54b7, 0xe780bd83, 0xd41a4b9b, 0xcb55597a, 0x9af93577, 0xd41a47b6,
-	0xfc055c7a, 0x525ff283, 0x3740482b, 0xba8c9c95, 0x811acb25, 0x8218af8e,
-	0x088f804f, 0xb9955eac, 0x9fa6e8c3, 0x75b2b7ce, 0xe77c6deb, 0x8854e63c,
-	0x3733283b, 0x597239e2, 0x20f9b5cb, 0xaeb7ce67, 0x5bf9024c, 0x5efa5e21,
-	0xbff68451, 0x5f2e0494, 0xcf56a0e4, 0x2841f4e7, 0xe9bcd55c, 0x17c212cf,
-	0x981977cd, 0xb70f465f, 0xbe91cb8d, 0xf9bd53f0, 0x8ecdc150, 0x6eaa789e,
-	0x237468bb, 0xcbffa45f, 0xc149e30a, 0xd454b15f, 0x9771d126, 0xffa27737,
-	0x1dec8ce2, 0xe0af83f5, 0x67e73d97, 0xa3153e49, 0xb497979a, 0x260b3f43,
-	0xe3888ef1, 0x1f280fde, 0x995bfb3f, 0x57221f00, 0x742cad69, 0xc7bb70cd,
-	0x61590c40, 0x6b4167bb, 0xfbe02145, 0xd1d3ebec, 0x8a445bee, 0xa40eb86c,
-	0x9cec0b31, 0x7180c4f3, 0x1fc9e755, 0xeb54136c, 0xe464b1f0, 0x305ca678,
-	0x1034bb89, 0xd8107bbe, 0xf539a65f, 0xf858e2ed, 0x9076292e, 0x15ca25f0,
-	0x17f180b7, 0x2f77d873, 0xfd01d731, 0x634a7b52, 0x4a7b51af, 0x94f6a793,
-	0x66425f26, 0x453c4126, 0xf132d3c9, 0x4d278809, 0x8ec941f9, 0xb5252be3,
-	0xfd1fa0f5, 0x16e1fb9c, 0x843489d8, 0x37aa87ca, 0xa62acb9e, 0x9892e9f3,
-	0x0f894bff, 0xc5654258, 0x5e5e5a20, 0x2cba33e6, 0xa277e73d, 0x943dc275,
-	0x163c03f3, 0xd1bf7007, 0x886be2c7, 0xaae2ca43, 0xf3ef5a4f, 0xba2ad81f,
-	0x8f506ca2, 0x9bc6577e, 0xafe7f5fa, 0x4f212f9f, 0x9bca3ce2, 0x561c6067,
-	0x3e07788f, 0x7059b91f, 0x27ec22f9, 0xf1341651, 0xc332092e, 0x1ad7e29f,
-	0x0f5fcbae, 0x6bdf9579, 0x1bfcaea2, 0x440197f3, 0x258a5fc3, 0x913970f7,
-	0xbfc013f1, 0x7f710520, 0xc9f8637d, 0x2f5fe03d, 0x844ff8df, 0xefbb543f,
-	0xff89fc29, 0xe88ff1d4, 0x48bcfe31, 0x78deabf0, 0x778875f5, 0xcfd5ff2c,
-	0xb7ee846c, 0x926352b3, 0xe57bae93, 0x1736d5a6, 0x6bc91df0, 0xd6717d83,
-	0x448b4e27, 0x7997df0f, 0x59711fdc, 0xc2bbf004, 0x73fc293f, 0x4ef8fcaf,
-	0x6caea3b0, 0x4fe8ed92, 0x4c05366d, 0x5bab9e94, 0xb1921497, 0xf964ef98,
-	0xfd022f47, 0xc7c9b4d7, 0xfe5a74d5, 0x41259fcb, 0x94a5107c, 0x48648621,
-	0x549f6803, 0x00b8fc6f, 0x121a8df4, 0x6faafdc4, 0x167ffd07, 0xd8b0f28f,
-	0x1cb3db18, 0xd049341d, 0x5a6afd9e, 0xb4517c7f, 0x69db7a41, 0xb2d46fe0,
-	0xbe90bf44, 0x3bb7195d, 0x00eb642a, 0xc913abe4, 0x0aabe044, 0xd98f885e,
-	0x7e5f2b1d, 0x1d276c66, 0xdfc6d757, 0xbe1504da, 0x52e97b14, 0xfc5fc2cb,
-	0x1f3bd1da, 0xa3f740bf, 0xe455bf5a, 0xdb8da394, 0x56967e4b, 0xc41b01ca,
-	0x906e5573, 0xb9fa5e9d, 0x5f17d5f2, 0xd9fc167a, 0x4739347f, 0xaf15f852,
-	0x13723bee, 0x916c57cd, 0x69b21407, 0xf0a48458, 0xffd0d4fa, 0xaf0f8f96,
-	0x7db6f947, 0xf618c746, 0xe1f187fd, 0xb2d8a975, 0xf4c648cb, 0xcb5e47c4,
-	0x2587632e, 0x74b4fac2, 0xb7fe8016, 0x1abfe5f2, 0xdd9def81, 0xa9819029,
-	0x61b9f011, 0x8087ea1f, 0xbe4f5c27, 0xd3f5a15e, 0xeba1afd5, 0xbf467202,
-	0x857afa5e, 0x5c00bf9c, 0xf4a1b388, 0x21afdafd, 0x264fee0e, 0xeca1e027,
-	0x306c87b5, 0x2d52d39f, 0x56e7f3a3, 0x2bbf0127, 0x7649bd93, 0xb2f7d94c,
-	0xfa461fe7, 0x70f43d2b, 0xba57f312, 0x76501906, 0x3cc1077a, 0x1bbfaf17,
-	0xdc4259e7, 0xcf658748, 0x9a3e4589, 0x69912a7e, 0x93ec225b, 0x9c9f7c4b,
-	0x2e2e817e, 0x4569e79d, 0xe441fc2e, 0xe8bbe172, 0xcf987d0f, 0x98906a85,
-	0xd6ccd4ff, 0xd06c80eb, 0xfd10d1c8, 0xe5147c6e, 0xae61b9c7, 0x56ee7081,
-	0x28179613, 0x5343c447, 0x6275b207, 0x51db0772, 0xdf0793b9, 0xecbb7ea1,
-	0x69ab1a8a, 0xe9467287, 0x9fef197f, 0xf41a3b8e, 0x9149d3b7, 0x46e191ed,
-	0x3d500f85, 0xaa674543, 0xfff6cefd, 0xdfb606c6, 0x9beffd95, 0xffca0d31,
-	0x23ed9872, 0x97720768, 0x10302b8e, 0x16cd77cb, 0x48983f90, 0xdf3ed220,
-	0xae7df328, 0x0bd3d72d, 0xc424bf1d, 0xfa06e8aa, 0x4075c789, 0x34f25f79,
-	0xa3e2af6d, 0xadafd035, 0x1f655c27, 0x707e7297, 0xf5c1f81e, 0xd6407e61,
-	0x5e2bf627, 0xbdf652b4, 0x5fec2cf4, 0x0ebd5fba, 0x1172bfd8, 0xcd93ffcc,
-	0x4fdc8e7b, 0x2d27edf7, 0xf2d5beca, 0x2dbefd55, 0xc630fadb, 0xedf7eb9f,
-	0x496b4327, 0xbf4b7dc4, 0x43b7dc47, 0xf847fe3b, 0x24c782aa, 0x2aaf96a3,
-	0x7c37b27c, 0x16e4f9ea, 0xd57881d9, 0x3bfa49f3, 0xd27ab24c, 0x0a8742a3,
-	0x47ff95fd, 0x47e070d5, 0xe8553a21, 0x0aa74430, 0xade7ea1d, 0xfcbea3c5,
-	0x522df023, 0x537a297a, 0x4a95f3c6, 0xa6038b3f, 0xc90ff6ed, 0x50b97c44,
-	0xfdc691cc, 0xf3a80643, 0x45be5d3e, 0xcba5df57, 0xbbeae917, 0x4d5af975,
-	0x3db6cafd, 0x10748246, 0x9713d4d0, 0x31393bff, 0xfadd1221, 0xf5a1bf98,
-	0x39ee11a2, 0xd88258d4, 0xbc415e5e, 0xdc191f10, 0x51b9e221, 0x3d71c537,
-	0xa73637f8, 0x8f94bcfa, 0x7e628eac, 0xd07b6e85, 0xd5d34f16, 0x4c1f2c71,
-	0x1f03d634, 0xa307be54, 0xbbb1df98, 0x538b6828, 0x7e9d5bd9, 0x8778f911,
-	0x0dbdf22f, 0xdd70692a, 0xd7b97a3b, 0x758f9ca1, 0x62c6db47, 0x3e29d17f,
-	0xa2a9c7a0, 0xf8396525, 0x27451aa1, 0xea8bece8, 0x79c1b5ee, 0xfd3fb755,
-	0xfbf439ae, 0x164477e2, 0x4975e38e, 0xd0765483, 0x975de219, 0xf05c402d,
-	0x859fa45a, 0x2d17667e, 0x3f791b5a, 0x2576f394, 0xe0466596, 0x390ed4bb,
-	0x51ef3eae, 0xd7ad94e0, 0xe74ff77d, 0xed11a6fb, 0xda8df2ff, 0x9fb73772,
-	0xfce4647f, 0xc7191c67, 0xbfe657ed, 0xaa7b7ce1, 0x1cd77198, 0x07dd3eba,
-	0xf9a26244, 0xd7117e4b, 0xc166d2e7, 0xe237fe07, 0x57fdc44d, 0xf546824d,
-	0xd82e887d, 0xcef4d75f, 0xffb6bac7, 0x4007eb39, 0x307faf47, 0xda69dff6,
-	0x471ffaf5, 0x37f905bd, 0x407ca68e, 0xdbcfd67a, 0x02f18519, 0x48ad3bdd,
-	0xde3bddff, 0xe401f94b, 0x613934df, 0xff3bdd9c, 0xa9e8163a, 0x0ca9857b,
-	0x30f760f8, 0xb95dbfe6, 0x3b63afe3, 0xc2aefe50, 0x1a366c75, 0xffc99f99,
-	0xdee08f8f, 0x9d3f25c2, 0x3c17e815, 0xd7e6beae, 0xf0823e51, 0xbea59aff,
-	0xe76df40f, 0x43e3cd53, 0xce64adba, 0x1c5f1856, 0x79a87f8b, 0x758bf26b,
-	0xd6aaffb4, 0xb485c65d, 0xcfedef3c, 0xfd1c62c7, 0x5d37a656, 0x879e3b90,
-	0xc66d87f8, 0x2994acef, 0x26c02f9e, 0x5df646a3, 0xb07935a6, 0xe5e27a8f,
-	0xf5a7f473, 0x1aef1f17, 0xaffd7d99, 0xc5c10f8f, 0x67d59ff8, 0x7fde6016,
-	0xf403e8fb, 0x2e909a83, 0xd27ef995, 0x4cfa8752, 0xfb3ef35f, 0xfa0e86bf,
-	0xd0216f3b, 0x4d9b799f, 0xfdebdaff, 0xeb81d1b8, 0x3d07dfa2, 0xf7c77ce9,
-	0xd5aaff30, 0x27ede389, 0xfd368fbd, 0x5beeb63f, 0xfadbbae9, 0xfe77f79e,
-	0xfbdde7c5, 0x8f33bfba, 0xce1dbbaf, 0xfede6b53, 0x75f7c71c, 0xffe95cf9,
-	0xf457ba52, 0xad4376fd, 0x6f8e933d, 0x82b4690e, 0xe25f7162, 0x03a64b25,
-	0x0f2f70a2, 0x383bf8c0, 0x57608d5f, 0xbf989935, 0x581824cd, 0x82dddabc,
-	0x3b4447e2, 0x5fae4eeb, 0x0cb439dc, 0x5d3b90f5, 0x827d413f, 0x39edb548,
-	0xee7b7eb4, 0x6ac62742, 0xdcc7f192, 0x853d9f90, 0xe6f6b5e7, 0x12e204ef,
-	0x677f7ea8, 0xa003f4ee, 0x12e5dee7, 0x29a60f51, 0xa7efbfea, 0x93efb014,
-	0x7dd0f6b4, 0xdefe6d6e, 0xddfcda39, 0x843dde1c, 0x229eff8d, 0x587e07c1,
-	0x8953ce53, 0x2d3597e0, 0x0a908996, 0xabb54671, 0xbbb8eec1, 0x197edb48,
-	0x7f2a6728, 0xe3c537e3, 0x5c78436f, 0x3921788a, 0xed03de22, 0xdc7c8f13,
-	0xf9c7b3ed, 0x489ace20, 0x7bc7864e, 0x37e89caa, 0xccb8f6e7, 0x3596cbdb,
-	0x659fb0ed, 0xd8ae1d9d, 0x9be1bdd3, 0xe11cfb70, 0x2ff185a4, 0xcfb444bb,
-	0xae7d9d65, 0x5dd7cbac, 0xbf1d650f, 0x073cbaed, 0x786372eb, 0x5c5a865d,
-	0xccabf604, 0x8b7c87ed, 0x1687e593, 0xe8ae7611, 0x00d2fac3, 0x8466f117,
-	0x9897d1e3, 0x9ce02b8b, 0x405a3ccc, 0x6b5dc87f, 0xe60f9445, 0x55c7010c,
-	0xf8c64934, 0x450d8fe3, 0x85deb059, 0x7f562613, 0x09c30d9f, 0xf1c25cf8,
-	0x516a425e, 0xbf57257f, 0x0b3b32fc, 0xea0825ce, 0x845c4bbf, 0xb8ed41dc,
-	0x10216c92, 0x126af10d, 0x078ec6f1, 0x8e40b93f, 0xdae4fc6b, 0x496efc3c,
-	0xabe9c30a, 0xe5fc6f7e, 0x17fe9d9f, 0x29c767e5, 0x3a427491, 0xd497bb12,
-	0x3f7cf776, 0xa54d63c3, 0xba434be0, 0xfbeac80b, 0xb66605d3, 0x87ebfe0f,
-	0xe64f9013, 0x2c4c74fc, 0xe26407f3, 0x6e1ac47d, 0x3af25c37, 0x760fc162,
-	0xcfce9fc9, 0x6a6cf373, 0x87a4aabe, 0x9ffe1db8, 0xd3489710, 0x51a17cee,
-	0x048b3b04, 0xcdebffd1, 0xc57bc28f, 0xcca376fa, 0x6bafbe06, 0x3f002fd1,
-	0xf2afee11, 0xa6d29479, 0x75aaf1b1, 0x59c77b5b, 0x75cf6c69, 0xd571df80,
-	0xc5b7ddf9, 0x80fdd82f, 0x1d5143d7, 0xe6114505, 0xafe3893b, 0xf0dff770,
-	0x7f4ceafe, 0x99780caa, 0xce6a2f99, 0xee669df9, 0x264098cf, 0x770ab8c0,
-	0x0c9b66df, 0x744072eb, 0x1ad57dc2, 0x3ba345ff, 0x1eb1f9c2, 0xfc1f009f,
-	0x676427f0, 0xc4f3e009, 0xd808a24f, 0x73f1efd5, 0xcfb80cc9, 0x1eae8191,
-	0x731df817, 0xb84fcccc, 0x74c76cce, 0x9c8e6156, 0x68cdfb48, 0x50838fb5,
-	0xfebcc1b5, 0xcb03b33a, 0x4a76f087, 0xac95c1bd, 0x5ed1a75e, 0xbffe691d,
-	0x79f8128b, 0x937bf399, 0x75bd7f84, 0x35a9f9cb, 0x41fa0b90, 0xd167e2be,
-	0xfdc135d3, 0xe09a6971, 0xf60df903, 0x050be630, 0x53de1fd4, 0x64cfafee,
-	0x7ba15672, 0xcdab9e3d, 0x1e02f7da, 0x887f78e7, 0x678287d3, 0xf1fabf05,
-	0xbf29f52a, 0x9fed55ba, 0xdc6dabba, 0x54dfa06b, 0x81bb05fb, 0x3a96aa82,
-	0x6b0fb08c, 0xe1909eda, 0x073ee67c, 0xa2a44b83, 0x83f8eab1, 0x0f166675,
-	0xcdfc67b2, 0x2e4e80f3, 0x2c8135af, 0x1745ae24, 0xdf87c06d, 0x0f7f3833,
-	0xdfde6c71, 0x57d36489, 0x3c0fabf0, 0x597cf2f6, 0xe715370d, 0x4732ab33,
-	0x03da7706, 0x81e4bb95, 0x675a7a2a, 0xe572c78e, 0x074ae0fb, 0xfb420fbe,
-	0x1f7871c3, 0x4fb81137, 0x8ed2d192, 0xa81f6cf7, 0x5874638d, 0x88cbb2d6,
-	0x7bcd54f9, 0xfa3f4a22, 0x50bb34fd, 0x30bcaf1b, 0xe02863af, 0x5814d0a5,
-	0xa7408ce6, 0x7394a393, 0x2729afca, 0xc76e945c, 0x27247ffe, 0xa2722996,
-	0x95e3e303, 0xe7df02f6, 0x3031392a, 0x5a589c92, 0xeb0818e7, 0xfa4774b0,
-	0x4b24d840, 0x149a99df, 0xefbc4e49, 0x47cce761, 0xeef67df9, 0xdc4e54d9,
-	0xb31392a0, 0xf44e90a3, 0xf6513eed, 0x42725f49, 0xcbffb759, 0x907de6fc,
-	0xf7f61113, 0x71393a17, 0xe518bf8f, 0x45b33dc4, 0x4facbdcd, 0x391394fb,
-	0x5e61f749, 0xa044c676, 0x7db9f79f, 0x0bdf9473, 0x5e407e80, 0x11d94664,
-	0xd1b97a6f, 0x53ff5f1b, 0xfffaf97f, 0xbe159e10, 0x3fda94be, 0x7448d4a6,
-	0x979e9048, 0xbaf947de, 0xf8c8f400, 0xb907d2fa, 0x67c7539f, 0x66cf808b,
-	0x6b2cf9aa, 0x7266ed5f, 0xf52da6a1, 0xfcb4b999, 0x09d946fe, 0x30fef2a2,
-	0xf352cddf, 0x5ea8ccdd, 0xe3196ef8, 0x13fd97bb, 0x6dea7f50, 0xfce67f7e,
-	0x11b3f296, 0x31f408ce, 0xe68c6e67, 0x7189dede, 0x06d8c9bf, 0x113de5fb,
-	0xe63f79cf, 0x71c1c07a, 0x7d04c9bf, 0x9e3e49fa, 0x2f3d7c79, 0x3e794878,
-	0x22de5fc5, 0x6d574fa6, 0xd57f1116, 0x57ff6cad, 0x073e0b37, 0xff8c17cd,
-	0x56d79e1b, 0xb5e760ec, 0x39850674, 0x78aff5aa, 0xce1ea3af, 0x08362a09,
-	0xf70cde78, 0xa59f001e, 0xce259f1c, 0x29573c0a, 0xc1fad26d, 0x2f6da21b,
-	0x1e101b90, 0x78abc3fa, 0x105342fd, 0x7f0a1dcf, 0x20373829, 0xabb6d49f,
-	0x59fb711a, 0x9a2a4fb0, 0x0d9ddf75, 0x3704ae78, 0xadaf41d4, 0x7b96d16a,
-	0x8b17bcf8, 0x146d8c81, 0xb33df93e, 0xf778f4f3, 0xf653f1e8, 0x8873f12d,
-	0x9ff327e2, 0xfe259f87, 0xf05e785d, 0xc7a2f175, 0x3f145d47, 0x324f181f,
-	0x6c7e3f61, 0xf17f2170, 0xbbe22bbe, 0x189e8b4e, 0xe50f79a9, 0xef2f1ca7,
-	0x83f5dc19, 0x80b55ea0, 0x6fd74af5, 0xf34497d9, 0x38c85b73, 0x6d286638,
-	0x90e3cad2, 0xa0756ffc, 0xbb5b9f7c, 0xdab88045, 0x60befcc5, 0x7c09ef99,
-	0xe5c1e63f, 0xfad3de54, 0xdc9bc70b, 0x287e5e70, 0x53fc882a, 0x409ddfa1,
-	0xfa6f94bf, 0x0c4e38f9, 0x9ca3e60e, 0xb8ec136a, 0x4c51032f, 0x8275d16e,
-	0x4cf66d77, 0x5f016bfe, 0x6a5fe617, 0x4358eb63, 0x75f60dd7, 0x5be79f81,
-	0x80f83e98, 0xe73b22ff, 0xd992eff4, 0x490238fb, 0x44e77e40, 0x8f915cfb,
-	0x939aee70, 0x1ddf5aa4, 0x37fe8c9d, 0xe0fc4e09, 0x36fbffa3, 0xbacbdbeb,
-	0x7f4cfa2a, 0xd3c157d7, 0x1f3add4e, 0x9c2f6a8a, 0x8272e780, 0xf20bdf13,
-	0xd179e1c7, 0xfef646c9, 0x1fae41cd, 0xd805f7e9, 0x78f7ea1f, 0x21c0c066,
-	0x145a7a2e, 0xbf6295c6, 0x533f4c69, 0x3bfd29f3, 0x6e375f48, 0xa3b486a9,
-	0x7f8e165e, 0x066edf74, 0xd04d3fb9, 0x19d149c4, 0x27ffbee1, 0xbea397c0,
-	0x36493e02, 0xc8797ca3, 0x19eebece, 0x1ef02466, 0x3235e5da, 0x06bdd1d2,
-	0xe06c91c7, 0x04c98f2f, 0x83e5c7f6, 0x3b9d1e37, 0xa445ca00, 0x26f7e28f,
-	0xa56b8354, 0x91aac598, 0x5c9847e2, 0xfffbc13a, 0xaed79513, 0xa097786b,
-	0x7ce27b07, 0xb674bf70, 0x0754d773, 0x0f325bf8, 0xcf7386ad, 0x23f67959,
-	0x1b1d6047, 0xc74fbbd8, 0x9da1e4d7, 0x0577d0f6, 0xe8c767dc, 0xbb9c017a,
-	0x391ea767, 0xe0f7c742, 0xb73c449a, 0xbc4aeb9c, 0xe731ce07, 0x0e9d141e,
-	0x5de16f5a, 0x7f9c0b56, 0x122d1f4e, 0x0f2f0ab7, 0xeff47692, 0xeefdadcc,
-	0xca4fb0dd, 0xf7843ca8, 0x87fcca9c, 0xfc840ea6, 0xd7db017a, 0xb846dd78,
-	0x74ded9e7, 0xfb4998d1, 0x00f5a12f, 0x59eb35dd, 0x028d9abd, 0xe25817be,
-	0x64f9027f, 0x1f0146c9, 0xfaa769c4, 0xf5c199af, 0xbed12981, 0xf9a7b69e,
-	0x700f6852, 0x03ddc637, 0x743593e7, 0x527ed89c, 0x97539e1d, 0x98b476d0,
-	0x2efc6fb4, 0x5eb25bc2, 0xb0af7020, 0xe3ea526c, 0x41de0093, 0x47e509d9,
-	0x08dcfd77, 0xfb479ee3, 0x2fe1441b, 0x42a63b14, 0xc103f27d, 0x152eef8e,
-	0xbafb8b5e, 0x623bef9b, 0x14e2cd1f, 0xefdca204, 0x2af1d493, 0xb869d125,
-	0xd7964a9f, 0x3abcc3d5, 0x06a989bc, 0x468ba7a4, 0x2927e390, 0x7f54ddbe,
-	0x7164613d, 0x27bc7b30, 0xfe2a1d8c, 0x1d3a32b9, 0xcb6a2fdb, 0x98b33e41,
-	0x853c6114, 0x23e98ebb, 0x7ca3ab9d, 0x94eb57e0, 0x7df029ed, 0x7e136acf,
-	0x932af0bf, 0x7586173b, 0xf4fb7fa0, 0xbdc0997a, 0xd3eb95c7, 0x9e3ac1d7,
-	0xe13b2cde, 0x8e7c40dc, 0xbe9411c5, 0x7b64fcca, 0xa7b833d6, 0xcb7f199b,
-	0x02eeee7b, 0x94a5dbe0, 0x7e70994f, 0xe2563e5a, 0xf53e4728, 0x4be3145c,
-	0xe7a57e7a, 0x1b8d6553, 0x65a1cb22, 0xd0e59105, 0x37ee7ad0, 0x6b9f2c8d,
-	0xbbe98588, 0xf078c9e3, 0x0d571663, 0xf404d79b, 0x70bb20fc, 0xf3781ed0,
-	0xdc819fd3, 0x3be2b4ad, 0x7d92d565, 0x83e8c09d, 0xeb9fff00, 0xec29f2df,
-	0x51b9b287, 0x29d90ef8, 0x47d80f58, 0x1cf0136b, 0x8c57c4bb, 0x79e25778,
-	0xf4b49b4b, 0xef21f8ae, 0xa5c48b73, 0x31655f96, 0x77aaa5c4, 0x6e9447f4,
-	0xdbf33f69, 0xcab01f04, 0xdcea3fa3, 0xe62670ff, 0xe5ae38ed, 0x6b583f5c,
-	0xfa3eba45, 0x40d5c5c8, 0x287ef3b7, 0x89dbd010, 0xf20f5dd7, 0x7049bab0,
-	0xf4b89f80, 0x297dac87, 0x3ee30f6d, 0x5f4673fa, 0xb01dce94, 0x3fd7aa0f,
-	0x6feb1fb1, 0xff001c14, 0xd46286e8, 0x22bcca27, 0x9d8df2c1, 0x79504768,
-	0x7b68f185, 0xec1262bc, 0x2655ea83, 0x1562b83b, 0xb3e8527a, 0x40a7bf93,
-	0xb3b1cecc, 0xb4673b68, 0x9eb2f903, 0x4239c52e, 0xfd029e48, 0xbd1978d4,
-	0x3b2abe75, 0x4df48b61, 0xbd1eec9f, 0xd0227f42, 0xfe98665f, 0x33cfacf6,
-	0xf69e3d02, 0x91671809, 0xf40bf407, 0x9fe2b2f9, 0x1eb51621, 0xea7d17d5,
-	0xfd07b0e9, 0xe958cbc1, 0xe854fa61, 0xc7874f51, 0x8c0f7225, 0x51d5a1fb,
-	0xfabc8f38, 0xce59ef37, 0xcf9e19f6, 0x923fd5e5, 0x44bafb04, 0x0a407162,
-	0x1624ab5e, 0x5c63d637, 0x0719d74f, 0xba7c67f5, 0x0e8acc71, 0x20f1edc9,
-	0x4a3ea9b7, 0xdf9fb402, 0xe3117e6c, 0xd2bfcf2b, 0x37ea2779, 0x003a516f,
-	0x92b66ffc, 0x3e21da00, 0xade547e4, 0x1369c622, 0x4b359029, 0x712bbf65,
-	0xb2bf1531, 0xb7cbbe22, 0xb4857c9a, 0x27ebf97d, 0xc25c62c6, 0x7b7fa60a,
-	0x39d8115f, 0x2c63b788, 0x972a3bdc, 0x5e8e7c58, 0x345df82f, 0xdebbc3b3,
-	0x7a03998c, 0xdeccd09b, 0xb96f2c17, 0xfca93657, 0x65a2fbbb, 0x939e1ea5,
-	0xc33ae979, 0x3e300afb, 0x4a76fbf5, 0xcbd74e5c, 0xdbcafe8c, 0xcae7d464,
-	0x805cb79b, 0x63f2cd78, 0x6b77b426, 0xc11a2f9a, 0xd5fbcd9e, 0xc41decab,
-	0xa7135136, 0xae3e23d7, 0x20980c59, 0x0ab5abae, 0xbe6871cf, 0x3c2df313,
-	0xc66bed1e, 0x6afc556f, 0x8a5eebc7, 0xbf6d8ac2, 0x857be1b4, 0x786c9bed,
-	0xabf9aa5f, 0xc47b55e3, 0xf034b5c3, 0x4e3bb878, 0x918fe413, 0xc1cee1e3,
-	0x7d21283f, 0x878dad16, 0xbf8ccd23, 0x456671d1, 0xa4350f7a, 0xe9fabd77,
-	0xddcf10f3, 0xe793f5b5, 0x5f95dc61, 0xe21e7e5c, 0x6882a86c, 0xe6a53d07,
-	0xfe31f795, 0x1f176955, 0x97a0edc3, 0xc3f1897f, 0x7268fe17, 0x3b0bb402,
-	0xfe80a74e, 0xdfcb6171, 0x782e2092, 0xe8a98ed9, 0x3db659df, 0xedbddf0f,
-	0xfa059ecd, 0x7e23f5f5, 0x7b6ebf59, 0x3c60f75a, 0xeeba79d0, 0x714227c0,
-	0x2c552d8e, 0xe3c1d47e, 0x8e47371b, 0xcf11ef17, 0xaeeb3ad8, 0x5b1fc029,
-	0x67d09e99, 0xba61e35c, 0x63f4379e, 0xf8f3371d, 0xbe3b96d5, 0x3cf1ae32,
-	0xd7ae83fc, 0x7c6d18b8, 0x8bada7e8, 0x942cf17f, 0x1af426b5, 0x07e818d7,
-	0xf47894fe, 0xd95da3cf, 0xdeb08931, 0xa4f181ff, 0x0e857eb0, 0xa69fd7e0,
-	0x8cf8bf80, 0x44bf441c, 0xef098770, 0x38ef966b, 0xc2e9fb8a, 0xef1843f6,
-	0xf85c784d, 0xb1fa1205, 0x03ee5df8, 0x6568d9aa, 0x1d7c90f1, 0x61d25e20,
-	0x2e3cefc3, 0x12b5d192, 0x9c5bd92f, 0x3498b2e4, 0x8b0b3efe, 0xf8daace7,
-	0x0c3f8f01, 0x09309baf, 0x2bf3abd6, 0x3c1550e3, 0x130f01d8, 0x91c071d5,
-	0x714352e3, 0x8375bac0, 0x1e3e04f5, 0xf9a5f38a, 0xe9ef10a1, 0x8a468e13,
-	0x81b0bf2b, 0x905f0fc5, 0x568fdf23, 0x626b82e2, 0xd7d6fb74, 0xbee078bf,
-	0xf175f1e6, 0xa1c63f34, 0x5f051ba1, 0xf323575d, 0x846327f7, 0x85b7646f,
-	0x0a549bee, 0x4f2cfbfa, 0x997dc0c4, 0xbe234ed6, 0x55d8a293, 0xdc5dbe7c,
-	0x8af5d6df, 0xf5a27188, 0xbf907b2d, 0x3547f9eb, 0x8fd1473f, 0x6f1f2377,
-	0x1f931b75, 0x3ead5b5d, 0xb5d3850b, 0xeba44dfb, 0x189dcdea, 0x79bfbaa7,
-	0x7543b19b, 0xc3f20cfe, 0xd77f1aa7, 0x22c6bb6b, 0xa2efe73f, 0xcad9fbe9,
-	0x3f8d63f9, 0x9b353f72, 0xa9fa6a2f, 0xed18b6f0, 0x3bfbbe96, 0x05eeb927,
-	0x99dae778, 0x45ae751e, 0xd08be69c, 0x6462cfff, 0x3237576e, 0xa395383f,
-	0x959c3ef8, 0xda2707bd, 0x5b2f51a2, 0x0c749d66, 0x665d21de, 0xcc5c6235,
-	0x471e3aca, 0x326723f3, 0xeb4af7ac, 0xbbc604ed, 0xb2abf01a, 0x9bbb65ef,
-	0x27273e80, 0xcfaa6517, 0x1bf19461, 0x4f881807, 0xd3ad8fbd, 0x4a7d8206,
-	0x1850ef24, 0x7f699dc7, 0xb62e4095, 0x9f7f987b, 0x02313d5c, 0xf64bb7be,
-	0x6e14097d, 0x04e0be7b, 0xba4f6cd7, 0x7e43f067, 0x1df69706, 0x4753bc5d,
-	0x69c977e7, 0x6ad13d40, 0x1569d808, 0x4f6a8d62, 0x41d70346, 0x5e12521c,
-	0x8978c0a5, 0x11e63cc7, 0x46d43f70, 0xf50adaa8, 0x5de6929c, 0x9249d895,
-	0x72159dee, 0x57a50478, 0xc557a70b, 0xff65675f, 0xf03b70a6, 0x0cb896fd,
-	0xbbe40752, 0x7d46ead6, 0x0b9b29e2, 0xdfd23fef, 0x88938868, 0xf54ed127,
-	0x5fb450bb, 0xda3b7dcd, 0xe71f26af, 0xa613e6d2, 0xc9232749, 0x8e3e049b,
-	0x7882d102, 0xe06a9b88, 0x70abb2fa, 0xdc785264, 0x19c48971, 0x2c3bf280,
-	0x6e808f78, 0x1e7aaf2f, 0xdc768b16, 0x3e1a7c74, 0xe1d19b11, 0x6a71b035,
-	0x0389dbbe, 0xe3a747df, 0xaf1bae3d, 0x70b56f26, 0x0911277e, 0xdcc59df8,
-	0x2ffe384e, 0x4abdf069, 0x224f8a2a, 0x38c2644c, 0xde2130e9, 0x83cf9625,
-	0x6fa9aff6, 0xeb01ef07, 0x0c870b5f, 0xb5efabb5, 0xe0e5c0de, 0x8a514b11,
-	0xac93ee85, 0xb818b5e1, 0xb82c9d9d, 0x65a04e4e, 0x9fc801fe, 0x61e796d2,
-	0xc8d08a5c, 0x5ac46ae8, 0x4466fb82, 0xad55c790, 0xd53d468a, 0xa8de2664,
-	0x8e3f70f1, 0xd0f1e578, 0x3f9f8f8b, 0x28185639, 0xa50d6928, 0x1fceda35,
-	0xa62c35cc, 0x4502d08b, 0x8b10fe14, 0x5ff40c6b, 0x6c9dc33f, 0x1bd30718,
-	0x2877bf56, 0xc16bdaee, 0x1ba86863, 0x14c0ffba, 0x2ef82164, 0xdd0ef108,
-	0x51b8720f, 0x0ec653c9, 0x463406ef, 0x332ef287, 0x698df7e5, 0xdaf37f2c,
-	0x7ef0f5a1, 0xe8bda74d, 0xc78c0b66, 0xcf0ebf6c, 0x9af102c3, 0x937bd5f7,
-	0x4738ca2f, 0xc1e40c6f, 0x07b7c7fb, 0x23c5fbd9, 0xfc7ba1ad, 0x59378f28,
-	0xed007c94, 0x43d6a28b, 0x5aaad7c8, 0x01b9610e, 0x9e1d34f2, 0x421bc810,
-	0x65bf79e7, 0xb5f2414c, 0x716b5e14, 0xb1c13c32, 0xbf6632d0, 0xb8c3c1a4,
-	0x61d9bdfa, 0x6e2b483c, 0x86e1e1d0, 0x858785af, 0x87a86f6b, 0x3bfa55f7,
-	0x0b174a6f, 0x73d35f00, 0xdb8ef80c, 0xf41663c4, 0x145fd0bf, 0x670e23ca,
-	0xbcf72f43, 0xc2853b15, 0x97d35729, 0xaba14ed2, 0x9d26e8de, 0xef63afd8,
-	0xe7e96a83, 0x87ae2ddf, 0x8b32de00, 0x8896dd2b, 0x0577c7f3, 0x8b8bbba6,
-	0x74c213f2, 0x09ee2c4d, 0x11feaef0, 0x5a1f82cb, 0xe9dafe54, 0x34c54b39,
-	0x011fde3a, 0x3c31b823, 0xdee5c49f, 0x9e7451a8, 0xc6032e89, 0xb8b11fd5,
-	0xdb3b4057, 0x6200609c, 0xf71226cb, 0xf70c4104, 0xfa8feca3, 0xaf8ecc1d,
-	0x56f8362f, 0xfc60f3b0, 0xfa611dbb, 0x47d1d0e8, 0x5b47d190, 0xb547d227,
-	0x47d193bf, 0x346e5d5b, 0x3b03573f, 0xc70491ba, 0x5937bac1, 0x61a40b0a,
-	0x82626e94, 0xb23740f5, 0xc282b6f7, 0x3aebc428, 0xf58f5f18, 0xe652e3e1,
-	0x36fadbd5, 0x71fb481e, 0x0799d806, 0xa61e780d, 0xb7a94de0, 0x46e2c2c3,
-	0x7ee6cdff, 0x99a9fa11, 0x961fb1d4, 0x3f81eb6f, 0xed875c60, 0xd05dcce0,
-	0xae9b36de, 0x6fdc2390, 0xf815c1e3, 0x7f23784e, 0x04963bd7, 0x7bd720bd,
-	0x3fdb07c7, 0xde807c21, 0xe8f80193, 0x0af2fdc4, 0xdd9667bf, 0xce40b826,
-	0xef618f0f, 0x616ebc90, 0x16bbf576, 0xaf4ca791, 0x5bb83c49, 0x7b2bfb04,
-	0x27eb0195, 0x9ea19a42, 0x5f5e2aff, 0x95ddf8d2, 0x89e85575, 0x7818d272,
-	0x78f9e4cf, 0xfd2d1ef7, 0xa9a4c7c4, 0x1eed29e0, 0x45a290f7, 0xee265094,
-	0xc810f05d, 0x3e3f4a55, 0x7231bb4d, 0x442de014, 0x233e943f, 0x776d0fad,
-	0x7c6bad88, 0x5b0be80c, 0xf1152ef6, 0xae7e8e5d, 0x47bc166b, 0xc567eb49,
-	0xb4adda90, 0x4d2c567d, 0xf3c09f21, 0x087e7903, 0x743fd34b, 0x7dfa041a,
-	0x9ecbf703, 0x922578e5, 0x6399bafd, 0xb8f4cf20, 0x9418e4ec, 0x85beca0b,
-	0x5ce05467, 0xdbe7e25b, 0x0334c169, 0x8fb29bac, 0x6021a0a5, 0x4d2b42a5,
-	0xce201872, 0xbb8f5de1, 0x7b0bce08, 0x5fb73be3, 0xea81eecb, 0xc7ce7fbf,
-	0xebf58df3, 0x2fb8f4bf, 0xb7e039fe, 0xf8f1dcca, 0xbeaf9a4c, 0x69fa32f6,
-	0xdf54c457, 0x68ef55fc, 0xeeffc7e8, 0x00c4dfd5, 0x333ffa1d, 0x353fbc45,
-	0xf1e8cace, 0xb60e6780, 0x04efe2cb, 0x1c4a8192, 0x15ce2ab2, 0x865eb8ca,
-	0xdf86994b, 0x05bacf51, 0xa7ac2059, 0xf6878a57, 0xae78a931, 0xae2eab78,
-	0xbb2f3955, 0x80fcc025, 0x42beb159, 0x74faefec, 0x3e49f7f6, 0x9992fa63,
-	0xa1ce0ffe, 0x3373f2a6, 0x5efb31d7, 0x09598710, 0x3f08f98d, 0x5afd1536,
-	0xfefb4439, 0xaf40d641, 0xf4f28064, 0x67978454, 0x13a795d6, 0x6b915bf4,
-	0x4df9c3ae, 0x0cfd2a25, 0x13a346e5, 0xd1f4f1f8, 0xf7f9fe94, 0xe1bff4cb,
-	0x867f3226, 0xcdb8ceca, 0xbe515f71, 0xc4696f46, 0xfb7e8577, 0x523f38b9,
-	0x2163c5fc, 0x4115173c, 0x8f1e803c, 0x95610eb9, 0xdf13d1d5, 0xf1e9fc7a,
-	0x8f51e0ad, 0x9d0f9cb7, 0x9e8ef1f9, 0x23e3d1f8, 0x5be97e7c, 0x7530eb0b,
-	0x4bf288b4, 0xfc4f7bc1, 0xedfaf5b0, 0x009eb4b5, 0x0df142f4, 0x30174cf8,
-	0x862b27be, 0x3a6c4fd3, 0x140b37e2, 0x0f4801c0, 0x55e3d798, 0x04acc78f,
-	0xd5813ede, 0x1af80fdf, 0xed00fc89, 0xb2dd6521, 0xc6f76bd2, 0xe8c4de41,
-	0xa7abd14c, 0xbd50bc72, 0xbce6f51a, 0x9bfa2b44, 0x9a9eaf40, 0x5e5bc614,
-	0xde571b15, 0x600bcb48, 0xfc0afe9f, 0x0608b1d1, 0x95bcc5df, 0x56e05ff0,
-	0xe2ca5f3c, 0xb7df0559, 0x93d5a67e, 0xce0bfaa7, 0xdc3dfe82, 0x05655ee4,
-	0x87108c7f, 0xff1479e7, 0xd7f875c7, 0xf36bb3b6, 0x0afc7c7a, 0x27b931fe,
-	0xab7a14de, 0x7cfd72b3, 0xfa0a1930, 0x3337d8f2, 0x137f8163, 0xbf447c7f,
-	0x4563c4c4, 0x6e9c3821, 0xe2059e91, 0xa7b77d0e, 0x763e0b7f, 0x15494a90,
-	0x7253bb1f, 0xd8deb3af, 0xeb298f93, 0xc7af8535, 0x05dde214, 0x4429a67e,
-	0x1ec84bfa, 0xffcf0d48, 0xb3f72b79, 0x6043210d, 0x1c585f9e, 0x79f3ff8c,
-	0xd54de686, 0x9b3fe84b, 0xb66d9ff7, 0x121bfde0, 0x7842ba94, 0x93f7c34e,
-	0xf0f8c6bc, 0xbd656438, 0xd3096a53, 0xfbe2e6e7, 0xe42f14d9, 0x38f098cb,
-	0x090559b6, 0xe3e20fdf, 0xf66cdf38, 0xd3db9c42, 0x2b0dfb92, 0x83843df8,
-	0x527e7163, 0x3fc81460, 0xb6e5f97d, 0x4e50d5bd, 0x3d6095eb, 0x910afe3e,
-	0x3b821ff9, 0x5217be4c, 0xe953d77b, 0xa13946f6, 0xdc3671d0, 0xe801bd7b,
-	0xb8c2283e, 0x655cfcfd, 0xcf7645e7, 0xabec45c1, 0xf6f0a7ae, 0x02f7625d,
-	0x81db28f2, 0xedfa7a7a, 0x49f34e8b, 0xd3b41e70, 0xcf22abd3, 0x5bfdf81b,
-	0x68bb3f45, 0xeb0fbf75, 0xe3efc0de, 0xba8e2ffa, 0x1be7d60e, 0x2d61d5d3,
-	0x44f4295d, 0xf438ebe9, 0xf1f99dd3, 0xdfcb503a, 0x049cbccb, 0xe3d151f2,
-	0xeb8afac3, 0x9bd7a863, 0xe6dc3f3e, 0x857eb2ee, 0x35e8af3e, 0x6423d97d,
-	0xd34644af, 0xebe3ce71, 0x2edcd733, 0x41c68bb3, 0x886fd38c, 0x73cbde56,
-	0x393e8344, 0x95ed21af, 0xac573866, 0x07f97e63, 0x3d8d656b, 0xbedb86ec,
-	0x67bd9ed8, 0xb6b97f3b, 0xef8a23fc, 0xcef8f141, 0x868ed6ad, 0x7e1491fd,
-	0xbf67b7cf, 0xc9c82f06, 0x31a32379, 0xafdf4e7e, 0x7efa7e7e, 0x7035fdf5,
-	0xd8c1aafb, 0xd2a9da38, 0x1636ec4f, 0xcd697d47, 0x14f0cd93, 0x73f86f5e,
-	0xd4b8879b, 0xa3ae6f7f, 0xa44e7a21, 0x781468f7, 0xc2e7be0a, 0x0fe098cb,
-	0x1eff95a8, 0x6cdd9de9, 0xf413f337, 0x6088efd6, 0x8683ea3e, 0xe82203a7,
-	0x048223f5, 0xa0ecf0f5, 0x6350b0cb, 0xb97b300f, 0xef003d87, 0x657cd0a4,
-	0x0f662eeb, 0x5da1d4b4, 0x0aed4951, 0xe01b3b90, 0x7cc1901d, 0x27681940,
-	0x885eec84, 0x7786caaf, 0x0c5db932, 0x37a5a74f, 0x1f33fab2, 0x8c35374f,
-	0x9dd5bb00, 0xce932f0c, 0xa8fb5db4, 0xf557da99, 0x508a24a9, 0x76c8aafb,
-	0x4ed677ed, 0xde3bdca2, 0xa4bbc025, 0x65a8ff34, 0xecedff72, 0x8fd1b699,
-	0xda81bf82, 0x54d9b767, 0xfb6f6f76, 0x039b66e3, 0xfedbd9f1, 0xcd17b4e8,
-	0xdf8a3804, 0xe421f282, 0xbe28fe07, 0xf442a3ff, 0x53780b17, 0xe5f6e5e8,
-	0x88ced10b, 0x0a6ae6ba, 0x736593c4, 0xb8db703a, 0xc186365f, 0x706189a9,
-	0x376e4a26, 0xfbbdd3f4, 0x3bf028ea, 0x04fa3bbf, 0x2b7e79da, 0xf41fdbf3,
-	0xe3a91594, 0x026d6bdb, 0x10c097a7, 0xdc777fd8, 0xec0127b8, 0xc0596c95,
-	0xb2fd4ef7, 0x99f1e9ef, 0xdb669fc0, 0x6629d257, 0xfde2364f, 0x60547f32,
-	0x3d2ac3c8, 0x4ddfcfce, 0x3fdc5ff5, 0xdcff1d44, 0xb5abcd6e, 0xc022f831,
-	0x7bdccecf, 0xde80f40c, 0xae584ee4, 0x2b9004b8, 0x24a1eae4, 0xdd6a5f3c,
-	0x689f0367, 0xe0e77f17, 0xa49eeb7c, 0xdaad3405, 0xb0369ff2, 0x3e38eae3,
-	0xf8ed4bce, 0x76e5535e, 0xa113df11, 0x003d26fd, 0x85d6eb7e, 0x1fdeec59,
-	0xc8a6afbb, 0xef9ff1d5, 0x9cc45219, 0x4cff7889, 0x98a737d1, 0x9f183ebd,
-	0x1dfd8ebf, 0xf7ba29cc, 0xefe56ec9, 0xcff5e993, 0xe2b26c67, 0xa9f8c32f,
-	0x4fd67665, 0xfb2bfb6f, 0x53e204b3, 0x296cbfed, 0xb3f8c220, 0xefc24b3f,
-	0x3da40fe7, 0x3df60855, 0x01239d91, 0xa2f644ac, 0xa7cfcb7e, 0xbc2f6fe8,
-	0x6793be7b, 0x3cbd6ede, 0x6e2466eb, 0xd004d72a, 0x9803dcc7, 0x07c991d3,
-	0xf5bbff45, 0x55dfad33, 0x722b07af, 0x6e3fd732, 0x780210d5, 0xfbc2cc77,
-	0x8c240713, 0xc9ebd2f7, 0xbd058353, 0x204fc3e8, 0x4d6d6d7d, 0xfe7b018f,
-	0x009f60df, 0xc65eb6dd, 0x49aa83f7, 0xc7781ee0, 0xb455baa9, 0x24fc6007,
-	0x67d87af3, 0xe0a13e8a, 0x1eeaeda5, 0x7fda58f3, 0x7d8345f6, 0x76f10505,
-	0x57682ff0, 0xc1fdf84f, 0xfe679004, 0x07e784a0, 0xc6f717d9, 0x45f1542c,
-	0x7e0355ff, 0x6eeafb7f, 0xfc60f7ed, 0x8b6ed0f5, 0x7bcbd981, 0x063dfff7,
-	0x57dbd4f8, 0x90bc212f, 0x6f53d13e, 0xcf3bfd46, 0xd1fc862a, 0x8899bd6a,
-	0xde2187d9, 0x152c6a6b, 0xfaef426b, 0x6487ce70, 0xd4f49595, 0x2778422b,
-	0xd0f0092e, 0xf0561f43, 0x3e33d3ac, 0x773d71b2, 0xef0f1918, 0x4d5db65e,
-	0xc77bc0a8, 0x0afb18fe, 0x8f4ccf94, 0xee7bdeea, 0xfdf0e9c9, 0x9ddec8a0,
-	0x7ee22ab8, 0x62b3bdda, 0xdf6a8778, 0xeb8a4e52, 0xc5d06576, 0xfad16f0b,
-	0x3345f657, 0xbce4baff, 0x224f7d5e, 0xf1c7df5c, 0xcecc1815, 0xe183bce9,
-	0xac6fa8bd, 0xb0f574cf, 0x4361fff7, 0x0058393d, 0xfad462e2, 0xffac234e,
-	0x3e8ad9bf, 0x25a5fc67, 0x978bf806, 0xb4210ee4, 0x9268b2df, 0xac15740b,
-	0x33b07623, 0x18301fb6, 0x37325d60, 0xcf5c62a5, 0x731cfc2b, 0x31a34b49,
-	0x4b174555, 0x19d839f8, 0xaf129bd9, 0x9632befa, 0xfb3397f1, 0x71817fca,
-	0x91347f1d, 0xd0f41191, 0xfe4cb185, 0xa77a336e, 0xc77a866f, 0x68df780d,
-	0xef5ffeef, 0x97937787, 0x038c731c, 0x5894e0bf, 0x0eda0fb6, 0x710f52be,
-	0x821f6dc1, 0x6672a2d4, 0xa068b163, 0x1c45befd, 0x9877afcc, 0x90d6bdfd,
-	0x12b8943f, 0xc5379e60, 0xd6fdbe32, 0xdce68301, 0xbefe2dec, 0x8cb1f5ef,
-	0x32c6a50f, 0x03d6dabf, 0x700b09b9, 0xc447b9ff, 0x64f01f82, 0x456c3d47,
-	0xe8a80fc5, 0x6f0f936f, 0xfe863e9d, 0xc1977273, 0x38edcb0e, 0xf30882fc,
-	0x24219c75, 0xf43d204e, 0xac6f0a39, 0x5d5bde1a, 0xc71d1e0c, 0x0aafd86e,
-	0xfe04a9fe, 0xbfcd0671, 0x43c52ed5, 0x7f82983c, 0xff4a1e65, 0xdae2168e,
-	0xe4adc160, 0xfe15fada, 0x31efe568, 0xe513b04c, 0x5d2033ef, 0x6eb9b76e,
-	0x6f72c589, 0xeccfe40a, 0x36d27a63, 0x72494f2e, 0x9fc070f1, 0x79f34eb2,
-	0xb7a78caa, 0xe3e7effe, 0x4bafd254, 0x0ec8afd7, 0x76cdd22f, 0xf0ee4f16,
-	0x10e9cc06, 0x8e96d677, 0x154a9f7f, 0x8e3f7b97, 0xfdf68cff, 0x830eb6c2,
-	0x558fee01, 0x50e210ef, 0xbea7eddd, 0xa933a21d, 0xedafe905, 0x5c7dc118,
-	0xe65dfcde, 0x9f72a48f, 0xe786ebbf, 0xf87fb0eb, 0x8120fb39, 0x1bfd93a6,
-	0xfc410e56, 0xafb06c06, 0xfba278c2, 0x46dad206, 0x92ebd023, 0xe52d2c65,
-	0x9a4bd5e7, 0x4b3fb8dc, 0xc478b3d6, 0x4ca9b165, 0x257a733e, 0xf8c1e886,
-	0x7b4dbade, 0x5c1ff08f, 0x7d6d9e7e, 0x4bf40f6a, 0x80fbebe9, 0x9eda9b8f,
-	0x55c30758, 0x46ecf5e8, 0x4594e119, 0x3df3cf6b, 0xb8cfccb1, 0xf7a330fd,
-	0x5ce51bc9, 0xb26c4f78, 0xbfc1d897, 0x4dc6d6fd, 0xb7eff022, 0xd9539e80,
-	0x7b79073e, 0x3163df66, 0xd6f907df, 0x47e02069, 0x652466df, 0x62fb545b,
-	0x343786ef, 0xb9bcb7fb, 0xebfa3a6e, 0xe005e23b, 0x55becaf3, 0xe8cdbef0,
-	0xfff70dbc, 0x9ffdba9d, 0xc2b7dacf, 0x4f7ad0ba, 0xd4fffdf1, 0xe9ffba34,
-	0x718db8a7, 0x66d9c002, 0xdccefc8c, 0xfe90df4b, 0xa3b57c42, 0x297d5f07,
-	0x6c1ff996, 0xeaffb4e9, 0xffa12e3b, 0x4e3e3421, 0x2be54f37, 0x002a9374,
-	0x0ae91bfe, 0x517c008e, 0x533d02bc, 0xccfe7a3d, 0x0795dc0c, 0xe1ff3c24,
-	0x2e3c4be7, 0x6a947704, 0x99f986bf, 0x6fdd6fb2, 0xf2b238c0, 0x9e82576b,
-	0x45e8509f, 0xb82b3cfa, 0x7953c787, 0x71f61676, 0x8eb07e04, 0xec8ae3e3,
-	0xff7debee, 0x65cf40c1, 0xf98462d4, 0x1d82f590, 0x772945d6, 0xbdef67ac,
-	0x94f0e61e, 0x2dbf87ef, 0xde3d83be, 0xf0cc3d21, 0x5c42341d, 0x931f28eb,
-	0xc5c84463, 0xb70c40fd, 0xb67d860f, 0xfbafca84, 0xacebf255, 0xaa7488dc,
-	0xce23e1e0, 0xb1c4aeb7, 0xc7ce3f79, 0x5d1f07e9, 0x82ff0aa2, 0x3f6c0924,
-	0xe7db028b, 0xbb3fc022, 0x90dba6ef, 0x4c88efde, 0xb7b076ef, 0x47efe1e2,
-	0x8cfa406d, 0x7bc7669b, 0xce494f2f, 0x7e8d38a8, 0xef74c3e4, 0xced067a6,
-	0xfd85fa03, 0x97fd1bde, 0x0893fd01, 0x74a3ef74, 0x853f5aaf, 0xfc5d280e,
-	0x7ca5f01d, 0x7285d3d7, 0x65e0a90e, 0x731cee9b, 0xe9e19daa, 0x8d5200ff,
-	0x8000b56e, 0x00008000, 0x00088b1f, 0x00000000, 0x7dbdff00, 0xd5547c09,
-	0xf37df8d5, 0x3332c966, 0xb2764c99, 0xa00c4930, 0x80490e2c, 0x084ed8b0,
-	0xc3884a20, 0x93a0d752, 0x364b0900, 0x94569510, 0x8b062081, 0xb62d1518,
-	0xef858320, 0x106d1b43, 0x268358a8, 0x622d1110, 0xa57fb1dc, 0x41459041,
-	0xed1fa822, 0xe73bf587, 0x33337bdc, 0x6a02266f, 0xefc7e1ff, 0xdf77dee6,
-	0xcf7ece5d, 0x6ec5f739, 0x843631d3, 0xae630731, 0x7d8c01e6, 0xf4bf3f8f,
-	0xa12d8c97, 0xcf3773e7, 0x8224715e, 0xf0f7cfd1, 0x5e79babf, 0xc776bd50,
-	0xe91c57af, 0xc5cfafe7, 0xffe0525f, 0x8967a671, 0x47f1558c, 0x89ef4cac,
-	0xfbc025b5, 0x6cd69d11, 0xe266b498, 0x03846319, 0x8319789f, 0x1c636ff6,
-	0x6faa3e54, 0x1f2bd3de, 0xe9cc31ca, 0x9b39a685, 0x998f1533, 0x1b3605b1,
-	0x27f967ad, 0xb0dd93d3, 0xc6c646de, 0xc59bbae3, 0xd9dd727c, 0x99c68536,
-	0x8f7329e0, 0x66678389, 0xa07b9e4f, 0x6607f9ff, 0x886d964f, 0x70a13ebf,
-	0x4018eabe, 0x7ec48c4b, 0x0c985563, 0xc9bf9fe6, 0x326533e4, 0xc49f05b6,
-	0xa3db2ac3, 0xfd329b7c, 0xccf4d9ef, 0x9633b7a5, 0x75a4cb6b, 0xb15aeac1,
-	0x646858ee, 0xdfbcc197, 0x9bb59666, 0x1dd5d1e1, 0xb081e2de, 0xef462d8f,
-	0x389989d4, 0x1c1af398, 0x9d629aff, 0x6a5801ed, 0x38a6cbac, 0x6992d007,
-	0xcf8fb65e, 0xeced9793, 0xeea1b2cf, 0x2db9e670, 0xf8128d8c, 0xc930ad62,
-	0x421c3f70, 0xd9e1c6f1, 0x20175e13, 0x1750867c, 0xd5e27e7a, 0x667d1ba8,
-	0x0144f3ff, 0x78632fbf, 0xd3c1adf9, 0x1d0e66db, 0x553e6027, 0xcacc6649,
-	0x5c554b3c, 0xdb6628ff, 0x773ff0e4, 0x1c2e628c, 0x57189a7f, 0x8ffacbb6,
-	0x10aeafa6, 0x78869afa, 0x22e88ead, 0xd053eaba, 0xbcc07469, 0x8bdd194c,
-	0xee98fac1, 0x80ac5eda, 0xbd71eaba, 0x29554800, 0xf6c7ebe0, 0xd7338d84,
-	0x01d99e23, 0x0cc9cb13, 0xcdb567dd, 0xd1b6e1c0, 0xe866fa30, 0xb865e097,
-	0x838bc003, 0xde3585e3, 0xdc6bf88a, 0xd7886268, 0xdc39636f, 0x68d953ac,
-	0x42b7f403, 0xc6f7247f, 0x57039ea9, 0xd931bd41, 0x9e6050e8, 0xc22e8613,
-	0xa0ab89fb, 0xadc3e88d, 0xbc4fbe20, 0xdf9ae23a, 0xa277bb40, 0x8bc0e58e,
-	0x05b08d5b, 0xa7bfc3a4, 0x482936f9, 0x27c42da7, 0xc1b2c7f3, 0xbede7826,
-	0xd5d11869, 0x052ce2ac, 0xe6ce76e9, 0xdb9f0558, 0x2a74d8c7, 0xd863eff3,
-	0x13e89542, 0x16dea0f8, 0xde618f80, 0xd5e1153a, 0x6c93ce3b, 0x11ec6588,
-	0x23e335db, 0x32ce81d2, 0xcc1b2459, 0x5f5043d8, 0xb46b7009, 0x4b1614bb,
-	0x0a7306f5, 0x236321f1, 0x0cadae08, 0xd518d4f0, 0x6045775d, 0x7f5e2cff,
-	0x86eaf1a4, 0x9ec63486, 0x22357189, 0xbb303e9e, 0x87f9c11f, 0x44a9d526,
-	0x7fae82e7, 0x127ece80, 0x2c2ed4bd, 0xe0f38762, 0x0e660ef7, 0x47901ba4,
-	0xf8066eb7, 0x9b3de895, 0xbd355d70, 0xc38e3e8e, 0x657cb6d5, 0x7ba184f4,
-	0x21788eb9, 0x8cc7d817, 0xaeef11f0, 0x7ecdcb53, 0x66c5b3b9, 0x52ed4c17,
-	0xfcfc5b26, 0x79eb7286, 0x593b9733, 0x98229a50, 0x7ec762d7, 0xac23a23e,
-	0xe5fae4c7, 0xdd62cad1, 0x3e185f78, 0xeb890d7e, 0xaccf9467, 0xf2ff7fe5,
-	0x1fd0a19b, 0x9f89577f, 0xc4fce35e, 0xc5a3f5e5, 0x3c22269f, 0xbdf09390,
-	0xeb1cc5db, 0xeadf3a97, 0x5fb9748b, 0x3ea09b65, 0x2af464d8, 0xe66db831,
-	0xf18a25b0, 0x945b0d90, 0xa820cb56, 0x2e614bff, 0x7fe9c3c0, 0xbfae54a9,
-	0x133e3dd7, 0xa1d9afde, 0x7e852e73, 0xf10a2d35, 0xf337b383, 0x371d0045,
-	0x31075947, 0xb770af18, 0xf68065d9, 0xc9044ad3, 0xd7009c65, 0x2feb9061,
-	0x8268cae8, 0xc02df5e7, 0x5d3d507f, 0xf5c6a808, 0x6c319dea, 0x83be1f80,
-	0x1fb47cde, 0x1bda00ec, 0x4f67c89d, 0x9ff1f245, 0x81f0cc8a, 0xbe528310,
-	0x4a0188e7, 0x6e825961, 0x62c67af4, 0x78504f00, 0x30b51cb1, 0x3c07a5db,
-	0x35e67a2b, 0x7546be00, 0x9f08aab5, 0x8e872eac, 0xe9f3fd99, 0x3bed18bb,
-	0x39d0ef4b, 0xd6d5f403, 0x7aabcfbd, 0x31d0eb80, 0x942af58d, 0x6f9e3189,
-	0x4623de10, 0x7b63d5d5, 0xf557b15c, 0xa57cff40, 0xe905b76e, 0x44e61aec,
-	0x24f92ab9, 0xc1b593ae, 0x81ec5972, 0xda15974e, 0xb5771c47, 0xc7fd800d,
-	0xe38299b8, 0x7c0dfd49, 0x0e9162c6, 0x44ca5de3, 0x3fe86718, 0x8e47c118,
-	0x68ef75b3, 0xbe3ef905, 0x18e28c63, 0x6be74a10, 0x38b7e398, 0xce9f77ae,
-	0x3475f889, 0x9406d733, 0x62ba7f13, 0xf64bc20c, 0xf5cb1def, 0xa78f48ca,
-	0xee154408, 0x1de70627, 0xb76fa37e, 0x6c33d601, 0xd1b77796, 0xd99fb011,
-	0xed4bc68c, 0x523ed2f4, 0xb10a780e, 0xd2c6b6cc, 0xb78e2338, 0x7e800db6,
-	0x1fb07549, 0x78ef4f68, 0xa6b8414f, 0x882875d7, 0x777badcf, 0x3ad37ad1,
-	0xf82979da, 0x176179eb, 0x5603db74, 0xdb23ed1d, 0xf2cdf5ca, 0x666f5c53,
-	0xadb27ac7, 0x2c7dfe09, 0xd724f42f, 0xf66bf8c1, 0x17ef7566, 0x2895eee5,
-	0x52e403e4, 0xc691ac6e, 0xe9eacbb9, 0xbdabfb8f, 0xd20f73b1, 0xdf7bf3e0,
-	0xb47f12b1, 0x137e13c4, 0xf84a7df7, 0xba485c48, 0x37d9ad98, 0xb179415f,
-	0xa67014a6, 0xca59c284, 0x7eb8358d, 0xf45b1fa2, 0x27cfa024, 0xd8829eed,
-	0xcca57b40, 0x20159d1e, 0x8f7be497, 0x19ee662f, 0xed6190b0, 0x16595be5,
-	0xb17ef7c9, 0xc27df201, 0x9122fbc0, 0x2e2c9a9e, 0x569fb617, 0xcf388dd8,
-	0xfb425833, 0x975e0633, 0xe0407af0, 0x52763b33, 0x870875b6, 0xf8e80d93,
-	0x4fde4899, 0x8dee8f2b, 0x83bb09d5, 0xe0eb0bd3, 0x08fb82f4, 0xc666bfb4,
-	0x748c3c72, 0x9cf48a79, 0xfee2a64e, 0x76f81786, 0x1b0edd23, 0xf48dddef,
-	0x9d04ce9f, 0xa274e78c, 0x63dbf7a5, 0x711d7cb9, 0xdc218bbc, 0x0ee615f3,
-	0xc654ef67, 0xbe29bb72, 0x0fd13463, 0xce1943f0, 0x4eb53437, 0x66dca035,
-	0x7fa809b6, 0xa0eb137e, 0xae05797e, 0x366f48dd, 0x79f89b97, 0xe9c6d9be,
-	0x07d39326, 0x1c273fbc, 0x3e436d3f, 0xa3e7e01a, 0x7347a478, 0x26de3d28,
-	0x011bf4e0, 0x3df1d0df, 0xf1f8e177, 0x02973a1d, 0x603b0c83, 0x3ae831f6,
-	0x49e8016c, 0xf40653e4, 0xcfb40b0f, 0x9f2215b2, 0x153956a5, 0xb302ebc4,
-	0xd7dc1efb, 0xf98d9472, 0x5f3acf48, 0x6c97bc3d, 0x7efe1173, 0x67689eb4,
-	0x90686c11, 0x2c40f59d, 0x9557e3b7, 0xfa7ebca1, 0x53ca235b, 0xbdbfe487,
-	0x01e5d1b9, 0x50c7f1f4, 0x0e123f7c, 0xa7395adf, 0x2e5fb7c5, 0x8039cb04,
-	0x0f8e5ad7, 0x77c7e76e, 0x7cb9502c, 0x3d6b9608, 0x3e4423e1, 0xc1fc3c08,
-	0xeb84daec, 0x4045c6cc, 0xfacd1de9, 0xfa4f7b61, 0xf358c5f8, 0x2f67b34f,
-	0x8c5f8fac, 0xc7d5084d, 0xd7ae88ba, 0x75478015, 0x6150ea8b, 0xec8bf50b,
-	0xfaffc42e, 0x7689c566, 0x9516eee1, 0xf2fd61e8, 0x729bd228, 0x8f6e5fbd,
-	0x84aec419, 0x6b3ff052, 0x5a7d258f, 0x5fe62b1b, 0xfcc0bf06, 0xbabc6da7,
-	0x3d79e6dd, 0x6fad0e50, 0xe11226f9, 0x71593fdc, 0x4abb411d, 0x85818fab,
-	0x84df7814, 0xd70829bf, 0x322a0dc1, 0xad9ef5d6, 0xf6f09526, 0x8c378e2e,
-	0x0a33be75, 0xa6a7f5d6, 0x7b40bad1, 0xaf8eeceb, 0xeb05dd6f, 0xfae68daf,
-	0xeb9a36b9, 0xcebbd3e7, 0xbb7a41f7, 0x9274e176, 0x9ef4c37b, 0xdce5038f,
-	0x730efd1b, 0x6d4acc39, 0xd4e3fb47, 0x68fbe52e, 0xa235a100, 0x0aed1e9f,
-	0x06a9ca35, 0x1c4415db, 0x1f0039f5, 0x145b5f84, 0x073eafc1, 0xd6932ef8,
-	0xd9d70279, 0x14b2316e, 0xfc0b3f68, 0xbae4fd88, 0xcf7ac47f, 0x9a6f5f84,
-	0xa0b468ed, 0xbebfd50b, 0x1e20bc6e, 0xa2d57c60, 0x669c7da7, 0x67c44e51,
-	0x10c5d1b3, 0xc283deff, 0xab78103e, 0xba773411, 0x0f01c865, 0x81fd6fec,
-	0x7fbe2734, 0x48d9c77a, 0x47ed199d, 0x7d876a8f, 0x565de9a9, 0x5bbb87d4,
-	0x39de5ece, 0xc19be480, 0xbb3beb0e, 0x33ddb0ef, 0xcfed47e0, 0xfd88bf6a,
-	0x0dcdead5, 0xaa227681, 0x1a945259, 0xda5a523a, 0x220ca9fe, 0x0f2863fe,
-	0x57cc19bd, 0x3e5efb0f, 0x54d3d050, 0xd7be40e6, 0xcdbb7be2, 0xe00f619d,
-	0xb736cddb, 0xf385d703, 0x3ed2e6a4, 0xe83eb0b3, 0x0679e9cd, 0x0c6fee1d,
-	0xed29bd43, 0xb44fb93d, 0xfd7323c7, 0x5ef693fb, 0xce73fef7, 0x68c7da0f,
-	0x74ec83df, 0xc52c740e, 0x282d5a73, 0x03320785, 0x784adff7, 0xacfb16a9,
-	0xaab7308e, 0xcdb62fb0, 0xca53b270, 0x7dd0ac83, 0xf3869e00, 0x780f387d,
-	0x377fcf10, 0x4e11eb3b, 0xda1b0efa, 0x91afb0af, 0x50560fb8, 0xf8708c96,
-	0x8c9aecc0, 0x2599fef2, 0xf4fae88c, 0x14f7ccb3, 0xbb4b7a6c, 0x0366e88e,
-	0xffe882bb, 0x5b99dd0a, 0xebe266dd, 0x7e7ef8b1, 0xe50ea347, 0xa1cf8e6f,
-	0x797ab943, 0x474eb347, 0x2f19e0f4, 0x0f5674e0, 0x54dfebeb, 0xba48fea7,
-	0x2e9e1498, 0xabf6f042, 0xb849bc40, 0x30f4128d, 0x3286e10a, 0xb27f4bb9,
-	0x370fc233, 0xb54b0bc0, 0x58c78e87, 0xa9c20667, 0x7d63c5ed, 0x9abc613a,
-	0x8add8f97, 0xabf9a970, 0xcc618889, 0x418f2f5f, 0x30b2ffba, 0x72735dbc,
-	0x0f5b9d71, 0x3dab78c4, 0x157be48b, 0xbda230eb, 0xaddd7200, 0xd2eb900f,
-	0xe867db8e, 0xf7f1c628, 0x12d9510d, 0xe759f380, 0x461624b0, 0x3f72c85f,
-	0x00396dda, 0xe155f47f, 0xfcc5e4f9, 0xda476e18, 0xb25afc83, 0x9678b7dc,
-	0xe7a18c7b, 0x8e0df6f1, 0xb14e7f24, 0xc87a1ec6, 0xa78dedce, 0x81cf5ced,
-	0x3ae17660, 0xe2c5fd4f, 0xa9d342f3, 0x0cadf7dc, 0xdb6a74e0, 0xa05e79bb,
-	0xe3ac53a3, 0xdf9097f6, 0xb9d336be, 0xfbf078ae, 0x7e2c4b79, 0xfb8abcfe,
-	0x2f55d852, 0x407569bc, 0xbb2de2ff, 0xf001bde3, 0xbfe98abb, 0x4ceba6ee,
-	0x8fef979c, 0x20fb3be9, 0x274bd83e, 0x16501d12, 0x3c6af8bf, 0x373803a7,
-	0x14ff450d, 0x633f8fe7, 0x5ddd8053, 0x3dc6b0bc, 0x1fc02f26, 0xf9922e73,
-	0x0efaeb02, 0xab891e23, 0xfda999cf, 0x9e25bb76, 0xd62f4de4, 0x8f4de50b,
-	0x7848baf0, 0x3c25db6a, 0x913e0df7, 0x97c5f681, 0x07c5d83d, 0xaf7ec1ec,
-	0xdc7b1637, 0xf5fc7263, 0xdea77dbf, 0x5ef30ee6, 0xacff188b, 0xda127873,
-	0xd6c6c57d, 0xe1f9c2cb, 0x0b5339e4, 0x57ce37a7, 0x7fb8e346, 0x1f1a6739,
-	0xeddb5d6e, 0x3fe69fba, 0x0aab07d8, 0xf44b0bb0, 0xdced379e, 0x326ab05f,
-	0x3f2e6bd4, 0xd9ce8e3b, 0xdc845e92, 0xdb798abb, 0xf4b57f90, 0xbefdf121,
-	0x4b2a5bc4, 0x693dbc45, 0x11ba7077, 0x43f920fc, 0x396d470b, 0xe13cc8c1,
-	0x75cf03ce, 0x799235c3, 0xbede1e41, 0xfe7a40c1, 0x4e1ff3cd, 0x3f7a03cd,
-	0x5b60d6b6, 0x5ace530a, 0x51ed3bb7, 0x360da7f4, 0x1fa814d9, 0x865eb473,
-	0x4eb95f7c, 0x1c3d2375, 0xe27b7b5b, 0x00bf2874, 0x7582adfe, 0x50306e54,
-	0x770dacfb, 0xc109fb50, 0x12eb95d7, 0x7cbca3fa, 0x4481fdb3, 0xeface3c4,
-	0xf11ebfee, 0xeb68c5b2, 0xaaca183f, 0x263dc526, 0x3673de00, 0xb7d50646,
-	0xdc2cd8e8, 0x532bc487, 0x1dcfdd3c, 0xdc631eb0, 0x6b63c44f, 0x18d51f88,
-	0x92ccedc7, 0x9aefb029, 0xbec96721, 0x8a27bddf, 0x662bc9f4, 0xd6c8ec95,
-	0xb7f3ffc1, 0xf45ea12b, 0x3649de9d, 0x58f3c09e, 0xce866781, 0x8a8fa040,
-	0x7a2f5e08, 0x68764f51, 0x78254591, 0x1d5c82b7, 0x65de4a43, 0x7efd0b1e,
-	0x4753df21, 0xfd0e1ead, 0x1818c6c6, 0xb45fa1ea, 0xa06629ce, 0x4e797f27,
-	0xc06769ff, 0x9733467e, 0x42e2ed1e, 0x5f6a0866, 0x0a7d6511, 0x4c185aed,
-	0x28b0fa8f, 0xd8f9f822, 0x813daecb, 0x5b58c4f6, 0xbfa4bb70, 0xbfa0389c,
-	0xb1b97efe, 0x8fe7cf7b, 0x567d804c, 0x9ec953ec, 0xde5c90be, 0x41cafb8f,
-	0xda51bf7c, 0x29bdef04, 0xf9e6f3a0, 0x9052cb63, 0x86140abe, 0xe763ae7e,
-	0x5ce5f3c3, 0x018c9f41, 0xf1f9fb9e, 0xbb39d13c, 0x7f6c8ebb, 0xeebcc15d,
-	0xe2ffae3a, 0xcb0fd9e5, 0xf73b4eab, 0x87f5686f, 0x53fe7f96, 0xf078a3fa,
-	0x0b5e19ab, 0xe585ff95, 0xfe5c2dc9, 0x5685e56a, 0x6975c85f, 0x4e7d5bd7,
-	0xcf13d20d, 0xd7e27909, 0xfe7a4617, 0x6b8f9e33, 0x9e8486e2, 0x219ec18f,
-	0xea877978, 0x760e5ce9, 0x6fd8edd7, 0x5711d980, 0x665a4b08, 0xb9468acb,
-	0xdcf164d6, 0x97e01719, 0xa8d4dfea, 0xedd1f943, 0xfb0431af, 0xf5f9e46d,
-	0xffbe389e, 0x875e38f2, 0xfb9d2bf3, 0x92794437, 0x2f6f38f5, 0x7e3033a3,
-	0x85fbcb25, 0xaf7690fc, 0x9da577b4, 0x7d59ed2b, 0xb367b703, 0x7e41dd63,
-	0x5fafd633, 0xed183f90, 0xef73e474, 0xe7da28ae, 0x107b8a67, 0x731569f2,
-	0xa017143d, 0x7c0deb07, 0xbcf5dafd, 0x13ec2716, 0x413b26e6, 0x1d1ccfb6,
-	0x8d6f9e5e, 0xc2ff53d3, 0x40ca6fc7, 0xb6b3ee3b, 0xce50339b, 0xfff1a67e,
-	0x0f0fc4f6, 0x507d7e0b, 0xe15893e8, 0xf9087827, 0xedc0ea08, 0xfef02dae,
-	0xe26ec58a, 0xbe2edfab, 0x1747ca91, 0x8fe7a42f, 0xfcd265c5, 0xdc77c2b6,
-	0x23a700d9, 0x17d2552b, 0x3eee8d33, 0x91def0b1, 0x1bf91d08, 0xc799d70e,
-	0x3b63336f, 0xcce5f3a3, 0xf26c27c7, 0x1f01f806, 0xe90c7dc3, 0x09af9f79,
-	0x9d2a5ebc, 0x2b4eb356, 0x7a6eadea, 0xb7a2103d, 0xa72f11db, 0xf6226759,
-	0xfa3a55ab, 0xf3a12934, 0xaf5cc83f, 0x2366bf61, 0xd37c8feb, 0x92f5c51c,
-	0x029bdfb6, 0x9ed0ab7f, 0xd433f285, 0xcce4615f, 0x7b5e823b, 0xc4ef5d5b,
-	0x9333bc91, 0x56eb4edd, 0x3ef44e29, 0xb4e707ce, 0xc639f10f, 0x975fd089,
-	0xc775b56d, 0xc779f855, 0x185c71fd, 0xfe4f5c7f, 0xee3aed1f, 0xd570e789,
-	0x296485fa, 0xc4c742fd, 0xd9c5167e, 0xe844fc82, 0x0fe70f0f, 0x48de3aba,
-	0xd510dbfb, 0xa8b8c5e9, 0x3e7e66f7, 0x55e51a4f, 0x5a95dfd0, 0xfe8858dc,
-	0x71c67fb0, 0xbc7da63f, 0xf1cf1927, 0x4e8d92bd, 0x2c5ce3f4, 0x76680e3f,
-	0x478138f1, 0xd358eb47, 0x03ec8de1, 0xf0ec4aeb, 0x34a11a14, 0xf8d226c4,
-	0x096eac49, 0x11fa0de2, 0xa3dbf230, 0x743c8a7c, 0x213c9743, 0x91a56147,
-	0xaddb77c8, 0xbc3c531e, 0x5d467437, 0x53edfa3d, 0xe23c78ab, 0x6de9e284,
-	0x1b8d0ecf, 0x5e3932cb, 0xbb88aff0, 0xd0346fe6, 0x3e37f2ba, 0xfcd1f146,
-	0x95eb578d, 0x1f943900, 0x27fea06f, 0x9bd39d5e, 0x851f18fc, 0x880ebf8f,
-	0x4662f4e7, 0x8a10e11f, 0xbfa58687, 0x313ff17e, 0xf609dcae, 0xef3cb050,
-	0x20243f17, 0x0cfaa16f, 0x3c7d73c9, 0xc07f23d7, 0xd358057c, 0x7cc8661f,
-	0x8fe40d85, 0xbe6c6add, 0xde51e306, 0xbc431d1a, 0x2bf9efb7, 0xcd676bc5,
-	0xb6bc5070, 0xcf7dfdfb, 0x3ff6c72c, 0x118362cc, 0x87be29fe, 0x7ccff415,
-	0xc9e3c91b, 0xb1326edf, 0xd9a5b025, 0x3c53376f, 0x8e954d78, 0xeed17ca1,
-	0xe832661b, 0xa0db5c78, 0x47f8e02b, 0x0ef12839, 0x7c446404, 0xfc21bc48,
-	0x6e3198b6, 0x5fad02fc, 0x7e80cbae, 0xc7dc04f0, 0x4e906b96, 0x15d9557a,
-	0x75c817f4, 0x4c9f485d, 0xfa69ff8a, 0xc3d467e4, 0x9c5fc5b7, 0x74819e1e,
-	0x5ac3d5ae, 0x7164dbfd, 0x0bbf6255, 0x4213e1e9, 0xd7894dfe, 0x7e3043c4,
-	0xc76f0616, 0xf00c1c84, 0xff19df8f, 0x1fe3fc23, 0xe3091ca1, 0xc8c67f1f,
-	0x9da36fe5, 0x0c2936dd, 0xe627bcbf, 0x32eeadd7, 0x6f8cfea2, 0xb3cac251,
-	0xc651ab6c, 0xfae05713, 0x2b44fc64, 0xb7c0c38f, 0xde5ffb11, 0x7b0bbad4,
-	0x165ec6e5, 0x15dbe68d, 0x37b9c3df, 0x046b3ccc, 0x30163b9f, 0xea3aa38a,
-	0xa82bc918, 0xb093b8fb, 0x0023f295, 0xb8e04f1f, 0x9d638a17, 0x1d9215b6,
-	0x8656e324, 0xf8f3e0d8, 0xcfd9789e, 0x6fc447f5, 0xe27a0f7a, 0xb05d624f,
-	0x5fb067ff, 0x141602fc, 0x9971919f, 0x62af3af8, 0xc47547cc, 0x3bdadfc8,
-	0xf304b3ce, 0x3386ba3f, 0x8f5053e7, 0xa215b529, 0x72cfb53c, 0x66fc61b6,
-	0x9fee29f9, 0xf98f3e5f, 0x79012a96, 0xca2c9e05, 0x05bc4203, 0x0a7607fa,
-	0xac53b6f9, 0x5fe4f41b, 0x5abaf9e3, 0xa4f403e2, 0x756e87c4, 0xed784aab,
-	0x02a7af0a, 0x43fedaf0, 0xf919fd78, 0xe48b9df2, 0x852f0fcb, 0x9171fe6e,
-	0x8c4bf374, 0x3b090c6f, 0x578867df, 0x67407ced, 0xbef88347, 0x78db3a07,
-	0xf9d2f189, 0xa7a89fe6, 0x5dfae142, 0x5c28427c, 0xfaeb1657, 0x5166bc91,
-	0xd57a70ce, 0x4ffe6096, 0x12d891e7, 0x1e7a5c86, 0x3b7bfac9, 0x1967888d,
-	0xd5eb9107, 0xf6c88fe6, 0x0f25169a, 0xbb859fcf, 0xe039d3cf, 0xe8bfdb74,
-	0x079a101c, 0x0f9de7c2, 0x39fc8de4, 0xdcd01d56, 0xa677fc0a, 0x752748c9,
-	0x377e3995, 0x7bf7fd0a, 0xa0e7cc0d, 0xffd811fe, 0x5ffbc60a, 0x03bcb4d1,
-	0x305757fd, 0x479c57bd, 0x1db9ef95, 0x7c7c8315, 0xf2955ec5, 0xfe66d8bf,
-	0x2c458ebc, 0x4c74ff41, 0x02398e81, 0x8aeb19e0, 0x78008e62, 0x07b78dc6,
-	0x7939e5d5, 0xc13798ae, 0xfde82bdd, 0x82b31ba4, 0xae78a7fa, 0x3a9e7a08,
-	0x9ea8372b, 0xa822375e, 0xa385ef7f, 0xde99ea83, 0x67fa836b, 0xaa0e4c37,
-	0x1cde34e7, 0xab18ffd4, 0xec147c7b, 0x5bfa3fb3, 0xebcc3f00, 0xd60cb8ea,
-	0xb7ac433b, 0xa0f29aef, 0x5afd81f7, 0x53381e31, 0xcf17c990, 0x00abdf8d,
-	0xff08671c, 0x39bee5ce, 0x55cfe341, 0x677e88ab, 0x048e1a36, 0xacf469fa,
-	0xc02a4f6b, 0x38a7c6b9, 0xb95ea15b, 0xecf9f826, 0xbde81b1d, 0xf6e0bed9,
-	0xeb839bb9, 0xd29cde83, 0xb901e79f, 0x4672bf29, 0x87dfb042, 0x9989d085,
-	0xb599f4e4, 0x7aa5ffdc, 0x24e86afb, 0x27ec5f18, 0xd0438dd2, 0x9839298d,
-	0xc11d226e, 0xfaf95374, 0x0708a1d6, 0xfba3fc2d, 0x0bc9e869, 0xfe007eff,
-	0x7d306716, 0xfb4ee169, 0xec567583, 0x95efd850, 0x6acfb850, 0x2a797879,
-	0x633b850b, 0x1fd7233e, 0x688fedc1, 0xd981fde0, 0x89ca18f3, 0xa8163bb3,
-	0xe3638718, 0xecff3c79, 0xed07af8e, 0x2f898473, 0x97c484e5, 0xf80425d6,
-	0xe97c647f, 0xaf19c634, 0x67111764, 0x844ffddc, 0x8f00c807, 0x0b11f301,
-	0x71dd119c, 0x3c7f48c5, 0x653f2b49, 0xb9e3fa09, 0xfe2bd204, 0xbc3d6c78,
-	0x03e6343d, 0xc653ae37, 0x8ebe64e5, 0x930a2bcc, 0x8497fc9f, 0xb40fcc04,
-	0x75f9e347, 0x3a7cfb4b, 0x22bcc977, 0xc302f226, 0x4fa4ffd8, 0x14d7f19a,
-	0x26760bb2, 0x0afebd70, 0x176dd78e, 0xa92fbc88, 0x471a7bd7, 0x2a7adfc6,
-	0xc52a5d95, 0x2894bb13, 0xf46153e7, 0x3f0947ca, 0xe685bf51, 0xa8147f8f,
-	0x38ee6a47, 0x0bf507bb, 0x6c63fdc0, 0x6f4058b7, 0xfdbd7e2b, 0xd12b68bb,
-	0xaaebd76b, 0x9c342faf, 0xd8c47089, 0x222d8e01, 0xe445afdf, 0xd6f5c9fb,
-	0xf4baa445, 0x9c1ed879, 0x8ae327ff, 0xc28dfdda, 0x3afe71fe, 0x976417bc,
-	0x76e5cf2c, 0x870169db, 0x276e160d, 0x9db91318, 0x1f39ab50, 0xfb7036d5,
-	0xacd7a40c, 0x8c718096, 0xdfea1689, 0x4c685cdf, 0xdf8471c4, 0x42a67965,
-	0x4572c576, 0x77e47b21, 0xfcf4d1b6, 0x868509cf, 0x6fffe844, 0x6011af31,
-	0x16636588, 0x93438f5f, 0xe892fe17, 0x68c252ff, 0x36898d2a, 0x5db67fe1,
-	0x6a91f481, 0x5da91976, 0x8aa71f0d, 0x1afbe44e, 0xb464f229, 0x42718071,
-	0xdfdfa26e, 0xe2d2edc4, 0xfe4189b1, 0xf18cf7fe, 0xd0afdfc2, 0x53942eeb,
-	0xef7814bf, 0xeaefffc9, 0xf1476b67, 0xaffff5ad, 0x7ffee48c, 0xf1081f19,
-	0x85c73bff, 0x1e23fff5, 0xfe7eeda2, 0x2dd893e9, 0x3e50d29f, 0xea7a30ed,
-	0xb5d5fcf1, 0x6878ec1d, 0xa4ebe7ee, 0x7dc0c0b8, 0x673c4ed9, 0xbb64cf2d,
-	0x4b6f482c, 0x7f3b4318, 0x696ea747, 0xe95f3c24, 0x3e7c3665, 0xbf3f2d7c,
-	0x3871ae55, 0x0e529b71, 0xfdc89d5c, 0x1f380687, 0xbdf1725b, 0x27186dc9,
-	0xd9953958, 0xb2350d51, 0xda2b22c6, 0xd8596b45, 0x4168e3f3, 0x770a134f,
-	0x4276fe51, 0x0fb7cf17, 0x7693a7ed, 0x73e2217e, 0x2ce79758, 0x7971cf8f,
-	0xcf112242, 0x5f3aeda9, 0xb27d73b8, 0xa46ae8ad, 0xf0be81af, 0xc29188e7,
-	0xbb32e64f, 0x03f8e227, 0xd87cf1b7, 0x677f294a, 0xf01e98e8, 0x75e0453e,
-	0xd79e5aca, 0xff7fcec1, 0x45ed2abd, 0x9433e346, 0x2d53952b, 0x5513f43e,
-	0x697a64b6, 0x99c56e5d, 0xe5a2f283, 0x2bd6376d, 0xe86df3f3, 0x9dfd7097,
-	0x91fb4729, 0xfcb8c9a9, 0x52a3b3d2, 0x8f1e909e, 0x64d438a7, 0xf1236f41,
-	0x72409cb0, 0xc034657e, 0x92ed72bb, 0xf3d7985d, 0xc5191ffe, 0x5da80e9b,
-	0x5fb07143, 0xe6167001, 0xa567a962, 0xa648b7e4, 0x718aa671, 0x7982ffbc,
-	0xfef3fc23, 0xda75e5aa, 0xf30301cf, 0x9d1d0046, 0x038379de, 0x09e5eeed,
-	0x93cfe411, 0xaa83da71, 0x42523ee7, 0x5c1aaefa, 0xd12d4dda, 0x9c83f436,
-	0x3a61f9de, 0xb93e4dc6, 0xed05ace7, 0xbbe87fd8, 0x7c2f982c, 0x16bbd17c,
-	0x93f1c017, 0x9de52a45, 0x86f42add, 0x897dfb84, 0x271fee1c, 0xdc2117ba,
-	0xddfc5b6f, 0x2a3cc0d0, 0xe88130b6, 0xa54fb679, 0x9cb75c90, 0x168d1cdd,
-	0xbabd774a, 0x2ea82e39, 0x89b540f5, 0xbf3b85d5, 0x69e824bc, 0x6306d376,
-	0xf7e703aa, 0x38fa42ac, 0x7474e7ae, 0xe7c59b7c, 0xa7aff4cd, 0x11b069bc,
-	0xb47f83ed, 0xea2b5898, 0x81877d33, 0x8abb49e7, 0x8f0ba015, 0x9d76bfc0,
-	0xa68e5e7b, 0xc63e66f1, 0xcc1947e5, 0xebe010b5, 0x724d9969, 0x998fbb41,
-	0x25c6389f, 0xae675c01, 0xe3fa1850, 0xc022ffb0, 0xfde1679f, 0xa5fda15f,
-	0x379967dd, 0xf9480e58, 0x3cf02955, 0x79f821bd, 0x696fcb65, 0x43cc199c,
-	0x27602079, 0x735f9e69, 0xd80af50c, 0x67ed4147, 0x519b66f6, 0x14496f8f,
-	0x6ca1edf1, 0xfef0f7d8, 0x18ec88ae, 0x927e184f, 0x36c5c9e5, 0x17cfd622,
-	0x7c795047, 0x5172a331, 0xaae3a722, 0x44efb796, 0xc766a97b, 0x738e2316,
-	0x9681f1c9, 0x999bd613, 0xe896ef5f, 0x1e21af3d, 0x28252cd9, 0xe1b3504e,
-	0x32ec91ac, 0xd1529f01, 0x00f08a5e, 0x1cc2dc3c, 0x503cf1ab, 0xc7f0655a,
-	0x5bffe0e9, 0x60c3bf72, 0xd1da80bf, 0xb5173991, 0xb94fb95f, 0x5abcf96f,
-	0xf30c7a05, 0x4583e4be, 0xd8cd1f42, 0x2f796938, 0xcefd5100, 0xfc9d1963,
-	0x78f649bc, 0x516bc091, 0x8f64fdc4, 0xe3d88517, 0xb7dc3dec, 0xe64ac7a4,
-	0xa5a23d24, 0xcc07493b, 0x23f7a06c, 0x4ddebd84, 0x120f2d6f, 0xcc3d245c,
-	0xe4685d5c, 0xc8c79be6, 0xb26f4aed, 0xa326d7f0, 0x30e816bf, 0xba063ec8,
-	0xed6baa0b, 0x9d0d2ff1, 0xb41f2819, 0xe7ccb876, 0x60e7c2d4, 0x9a5fcf22,
-	0xb38d70e1, 0x8073c00d, 0x85f9397b, 0x10ca46f1, 0x3dc6dbe4, 0x6edf2377,
-	0x0ff37ce4, 0x92b30f41, 0xf049113c, 0x9af4b3dc, 0xe77fc41a, 0xf2065312,
-	0x8a6967b3, 0x3dfd0f1a, 0xc39214ab, 0x18a697a3, 0x97d3ce11, 0x7c871e0d,
-	0x345ccb9d, 0x1638b4fe, 0x9c186ed6, 0x7947e5c4, 0x6319819d, 0xf4462908,
-	0x506a9f0b, 0x9a8c2fc8, 0x6be02264, 0xf557c096, 0xa4adb78a, 0x6ff01caf,
-	0xe01f5e28, 0x2aeab33f, 0xee701f09, 0x52c7cb08, 0x66b154af, 0x3b8c0a63,
-	0xd11b6567, 0x82479c31, 0x95b2d7fa, 0x66eaaf84, 0xd5dd7b4d, 0xb9d83f84,
-	0xb589cf11, 0xf79f823b, 0x8276124f, 0xbe913993, 0x225a773d, 0xb471af30,
-	0x4ad94f80, 0x6b7286c5, 0x84b6b2fa, 0x7d3ea01b, 0xed84eaaf, 0x8587c374,
-	0x1f2823fa, 0x1cdecced, 0x719c57f2, 0x9fb09238, 0x52edcac7, 0x8619ef45,
-	0x3ce2d3ed, 0xd8cfd0c3, 0x618591f5, 0x73a1df7e, 0x11e4732a, 0xfca20f95,
-	0x341b1b2a, 0x2fbec029, 0x3112d833, 0xf365e91e, 0xb83dc593, 0xd4f84088,
-	0x7e24ac46, 0x887e45a8, 0x34c3f3f0, 0xdda17b8c, 0x7942a2f3, 0x30476c84,
-	0x34709fbd, 0x9091c226, 0x9033efb9, 0x8a6f2e9c, 0xf971f3a5, 0xea2322b2,
-	0xb16df2d5, 0xf9c11f64, 0x86cbbdf4, 0x6879f1fa, 0x649ede59, 0x39bcb718,
-	0xe306a9d3, 0x19dcf431, 0x0d39ceb0, 0x8efe2487, 0x23bf80f4, 0x7807f0e1,
-	0x4f2f6a0b, 0xe0497212, 0x238a2d8d, 0xef3a5abd, 0x58089cd5, 0x48ba99d7,
-	0xe9ec93ca, 0x8c66c47c, 0xe903fca0, 0xabdf1abf, 0x7944cfdb, 0x0e57673e,
-	0xf169fc21, 0xd3dffe36, 0xcbbda187, 0x68616efe, 0x66cb4d67, 0xf6864db7,
-	0x6fce14db, 0x19afead3, 0xddc4768f, 0xbd9e5c49, 0xd5d07205, 0x41b7b197,
-	0x0e40ba0e, 0x11f20bbe, 0x4e2fefeb, 0x8b87faa6, 0xb47e541d, 0x47951fb8,
-	0xf25fbf84, 0xd102101d, 0x2e2492ed, 0xc9249717, 0x6482faf8, 0xffc66934,
-	0x3a21ddfb, 0x6c67de1b, 0x9d36309b, 0xc15cebb1, 0xa9c6f7fa, 0xd3b5fac1,
-	0x8c971b60, 0x0a15dbe7, 0xeee5a3d9, 0xe1fd4191, 0x7bc464dc, 0x9e5fac2b,
-	0x86f49dbf, 0xe81938c3, 0xb8e2a6f1, 0x37d7fea0, 0x9fd506a4, 0xfad07248,
-	0x0ecf8d26, 0xb4b9bf6a, 0xecbd507f, 0xa431919c, 0xf1014777, 0x679102cf,
-	0x8e770704, 0xfbef1b17, 0xa4b0dd75, 0x5fbd60bb, 0x73d033ef, 0x5e243e2d,
-	0x9951ac67, 0xbe9bc607, 0x2c1fe406, 0x74e348f1, 0x0e2fafe2, 0xb25ce858,
-	0x7f6f29bc, 0x350fd401, 0xe80f2819, 0x55b8b2d0, 0x6a1daf68, 0x2832b04a,
-	0x6155cb3d, 0x2c8cd8d7, 0x2d15de40, 0xa6f9425b, 0x93933e65, 0xef7697ec,
-	0xc0eeb293, 0x122e2af3, 0xd53de4f9, 0xfe10aad7, 0x67df045c, 0xe15ee922,
-	0xf127b071, 0x4ef4e12a, 0x0ae3aebe, 0x13f5865b, 0xb9f71f91, 0x6a71d60b,
-	0x0e856362, 0xbeea15fd, 0xcf9f9204, 0xb6e90cab, 0xf2819e74, 0xafbf660c,
-	0x533ac06e, 0xbe395372, 0x66a3ca55, 0x7c6898cf, 0x021405d6, 0x6d3c16fd,
-	0xae01ea7a, 0xfb7d78ff, 0x8203df40, 0x8e8e913e, 0x2c5732c7, 0xf5a1562d,
-	0xc276fe7e, 0x87ee7c06, 0xee106fa7, 0xfdc1bd7b, 0xefe01266, 0x20df0af3,
-	0x128b6f92, 0x70b4af88, 0xf2e4623f, 0xa07c8bcb, 0x9fa6e5f8, 0x7e9296cf,
-	0x26706e98, 0xe56e493a, 0x3adca0a7, 0x7640d2b2, 0xacbbd330, 0x3e8f4893,
-	0xe72c744f, 0x8c77a239, 0x691df5c3, 0x5f9864c8, 0xa552be51, 0x1fd20af3,
-	0xe7e3efef, 0x0f5587d4, 0xdbcc24d8, 0x525878a0, 0x3edcdd28, 0x5de5186f,
-	0x596ded6a, 0xeabc097e, 0xe64bb009, 0x8179e4ec, 0x3f53bf2c, 0x3ee06075,
-	0x3cf9f196, 0x4af94105, 0x1daf5955, 0x2ec8eb34, 0xc273c18c, 0xa254f789,
-	0x8d5913b3, 0x9f019343, 0x86bb7527, 0x2ff505de, 0xea8f7a26, 0xda223ea1,
-	0xeb842ff3, 0x0ccadd5c, 0xfaf30b25, 0x091aaf0f, 0xacfe7def, 0x2e6c49c1,
-	0xcf39fcec, 0x43fdeecc, 0x1bd815f6, 0xe1ddb8bd, 0xcffbc14a, 0x1acd1d73,
-	0xc7c3807b, 0x00204981, 0x056adb17, 0x7876376d, 0x3c01e588, 0x31d74f57,
-	0xe079e04f, 0xb1e3c8b0, 0xa873f324, 0x24a61bb4, 0x5d333973, 0xbd9be9c7,
-	0x037a70ac, 0x0f502afb, 0x173db948, 0xbf55aaf3, 0xbb72901e, 0xfe52358a,
-	0xdb99238a, 0x1f15b32f, 0x9835ddd9, 0x2bfd0289, 0x56683c6c, 0xf3e4d9b5,
-	0xb698d265, 0x7a60fb40, 0x73279732, 0x8e3ecf8c, 0x3ac95be4, 0xfd353ef8,
-	0x2af8373e, 0xf543323a, 0xc36d854f, 0x6f8d3b32, 0xb79fa270, 0x756bf052,
-	0x256be2a3, 0x51eb853b, 0x299d57e9, 0x3f56a8f4, 0x8d25e885, 0xd1a99a3e,
-	0x5831acbb, 0xe97ac2cf, 0xaf5cb2de, 0x68ee9d76, 0x0e61c10b, 0x6ff50bac,
-	0xa7b7c785, 0x38add684, 0xeb21a301, 0x31ee64a9, 0x780fb8b1, 0x5d08eade,
-	0x215f769f, 0xd4fb15eb, 0xf9c2bbae, 0xbbe62b55, 0x04293554, 0x243eed2f,
-	0x9c76b43e, 0x97854bc4, 0x45a2b7c3, 0xd67e7c21, 0xf2321f6d, 0x61ba4b6f,
-	0xe02ff0cd, 0xb047497d, 0x6f9412af, 0x1e41ab95, 0xd3d28667, 0x456cd61c,
-	0xad61a9ba, 0xdf9053cb, 0x1faf9b5a, 0xb5867e8e, 0xa9f9d36f, 0xa39aded4,
-	0x7a50058b, 0xbf8e5773, 0x17e74fca, 0x5cfc278a, 0xe9ddc3f0, 0xe01e9fa5,
-	0xeaa37335, 0xd4141c8a, 0x7a3fe44f, 0xbcb38e09, 0x63fa235e, 0xe53f0967,
-	0xab59d685, 0x2e5ff7e7, 0xcf015eb8, 0x0fdd7b9f, 0x7764f727, 0x76173f85,
-	0x3d1a5bdb, 0xfb81b1ff, 0xfe7ca55b, 0xff22ef5a, 0x3b0bb42e, 0xe3c6ceac,
-	0x9eb91a7d, 0xbd724f9e, 0x3979e842, 0x5b35d1cf, 0x13305e29, 0xf68080ed,
-	0xa56f56cf, 0xd9f1a578, 0xcbb45699, 0xbe99ae8f, 0x8f52f30a, 0xbd274d36,
-	0xa97bf95f, 0x40c63df7, 0x4d68a27b, 0x907bfad9, 0x5247378e, 0xdda2b15c,
-	0x2045ce23, 0x639fa167, 0x6cab970d, 0x95b39735, 0x90071fa8, 0xfd8bec7e,
-	0xf4f0acee, 0x68087e45, 0xe779bd27, 0x779fcf74, 0xfe77b8c2, 0x25e9da29,
-	0x755ad850, 0x5adbcf64, 0xcf563f51, 0xde20f0ff, 0xe07b01d3, 0x7b4b5ffd,
-	0x0645aa00, 0xea325b4f, 0x54076121, 0x6c321bab, 0xbd083768, 0x7f801ff1,
-	0xe7f87844, 0x11cbfc12, 0xdbf101fe, 0x9c381b4f, 0x7fe06ba7, 0xcbc72578,
-	0x2b6ca6f2, 0x6d3f2f9e, 0xebbb26c8, 0x821ca6d3, 0x00078cff, 0x1f5fdcfe,
-	0x0035776c, 0x817cf1fc, 0x96f587f0, 0xfc043bb7, 0x0dfe1c9d, 0x256cee1c,
-	0xc084672f, 0x57f94bd9, 0xe4d1fe77, 0x78e23b44, 0x57d92b64, 0xaca8b7c7,
-	0x932ec03e, 0xac37d176, 0xdfb449f1, 0xf767fc24, 0xf28418e9, 0xd7e1f4a7,
-	0xd98788ac, 0x3150785b, 0x95ccfe04, 0xeec7f144, 0xa8edbbf9, 0xdd5f116f,
-	0xe245d476, 0x19b986a9, 0xd796c7e9, 0x4239e00e, 0x45bf7171, 0xb66fbc8d,
-	0x19bef823, 0xda9592e6, 0x8ce2c5d1, 0xa4f5c088, 0x79d3ef69, 0xbebdc618,
-	0xd6eaf9cd, 0x5de7c4f9, 0x25b97941, 0xfe80d5ac, 0xd0acd636, 0x05eaed3d,
-	0x8642d685, 0x5a3ab571, 0x09453387, 0x56aecbca, 0x564f6475, 0x447c4519,
-	0x892455e4, 0xdc29497e, 0x629c902f, 0x2474f2a3, 0xda707d23, 0x7de1f462,
-	0x255f382a, 0x9ddefce3, 0x41dbc226, 0x5fc0135c, 0x333f0a35, 0xb7a442a8,
-	0xd3a7185b, 0x297bcc5b, 0x972707ae, 0xa71fa875, 0xc939342d, 0xa18f8dce,
-	0x42cdd2f8, 0x5e62ddde, 0x313d46ee, 0x61746ccd, 0x317ae309, 0x1a30d7f9,
-	0x0df987a6, 0xef748cbd, 0xf3a234b0, 0xdf123c59, 0x8ef87c96, 0x95ea5808,
-	0x1fa38e60, 0xf6dd7e18, 0x5e285c7d, 0xf609f8fc, 0x8546d74b, 0x170c8bf7,
-	0x2e5c5070, 0x609b3ff2, 0xc75828ec, 0x6f0714a8, 0x3fb8d877, 0xc9e02d7a,
-	0xb6afc7e2, 0xfc79799d, 0xb1f30ab2, 0xbc58f7f9, 0x5d541f24, 0xc8cabd50,
-	0x62794f9f, 0x34eaf143, 0x8e61dec6, 0x2ab78881, 0xee782194, 0x61f18b2f,
-	0xf43aef7c, 0xd4b1db87, 0xd64cbd13, 0x978eaf33, 0x0e3b660d, 0x25e3fdc7,
-	0x2abf9e02, 0x0031ad60, 0x83d7d6f7, 0xb437f3fd, 0x02fb5aea, 0xb7d3af7c,
-	0xea7d21b6, 0x1b061c22, 0xaf1ee3cc, 0xa539e2e4, 0xadc5e96a, 0xa689e2b7,
-	0xa0a3d5e2, 0xacf9e3ae, 0xfee6bf5d, 0x59805b89, 0xeab76e11, 0xcb9abb59,
-	0x52e100e9, 0xa978776b, 0xe2853cdf, 0x202e3237, 0x86183ff1, 0x2de3c40f,
-	0x4e307d62, 0x37df1583, 0x7cd7c786, 0x8ccc2f81, 0x15cfb846, 0xf257377c,
-	0xbf30535b, 0x0478823d, 0x2ed0553e, 0x22ddb806, 0xe2f89eca, 0x476e14a1,
-	0xcfc2943f, 0xe25cf7ef, 0x95dccc7c, 0x82797941, 0x7c4daa5f, 0x75ff397c,
-	0xc5307ca2, 0xf5cbe34e, 0x8a7ebd00, 0x0240e8e3, 0x691ebd20, 0x68fb27ac,
-	0xc3880b16, 0x49fbfa65, 0x77ad0eba, 0xf7dd11cb, 0x66bb1a58, 0x5f95e820,
-	0x8e513a44, 0xce6c62de, 0xf68733a9, 0x52e67193, 0xefa061d6, 0x993f4903,
-	0x55633fd0, 0x9535e533, 0xf41efc2a, 0x578b42e9, 0xc7e27607, 0x067bbe22,
-	0xa79c46ec, 0xfca15634, 0x773169af, 0x975f2096, 0x2c7a8d5a, 0xdff1163f,
-	0x8d17595b, 0x2b2d89ff, 0xdf8606e6, 0xe631504d, 0xa4f80b07, 0xadfb05d8,
-	0xebc3f947, 0xe4695d2b, 0x4ff5128d, 0x665c61f7, 0x03a079ea, 0x762e1faa,
-	0x5fa7bcc1, 0x91d9cf15, 0xfa7e7c62, 0xdecf413e, 0xe9de34e3, 0x53f3e4c7,
-	0xf90af9fc, 0x7f5e2bfc, 0xea2f8e50, 0x2f9e6b0f, 0x827f3cd1, 0xf89f5bd7,
-	0xf68bd8aa, 0xda4e68eb, 0x921423a5, 0x37214657, 0x12b6974a, 0xbb754b9c,
-	0xb59a3978, 0xdc2ff2ea, 0xdb8a64ef, 0xf7809298, 0x50588fce, 0xd533ff0f,
-	0x7e814c65, 0xfe79269f, 0x499ce586, 0x7288d78a, 0xe91f3df7, 0xf21e9285,
-	0xae428d27, 0xa6e5ea9f, 0x831ea5f7, 0xf1c3de71, 0xbb9c752f, 0xe4f9c743,
-	0x4d738cc7, 0x4738c86a, 0xfebecc7f, 0x24e1ca9c, 0x517691c7, 0xe94bba71,
-	0x663afc85, 0x70bf9064, 0x18cebdee, 0xcc314bf4, 0xcfd00377, 0x919cda5d,
-	0x7dcfe307, 0x0a8cc5ee, 0xbe849bb4, 0x32a739af, 0xdaa3c817, 0x5f950a73,
-	0xc4647db4, 0xdb35b37b, 0xa0e38cda, 0x45942d5f, 0x12aaeb01, 0xa77d04eb,
-	0xa7a01c9f, 0x4274bd8d, 0xf3cc3c6e, 0xa13b9e32, 0xd5ce7c47, 0x3dfd1f35,
-	0x4a11efea, 0x97f2f8d8, 0x7b077f62, 0xee611fb8, 0x6151e5c5, 0xee34576f,
-	0x390614f3, 0xfaa2fc60, 0xbf02f9f0, 0x1528eb12, 0x50fa6ffa, 0xe003844b,
-	0x1e3de43c, 0x9b58af5f, 0x62fe8b99, 0x04e8f263, 0x7e8f5b82, 0x67ee2ed6,
-	0xd67ee16d, 0x02c77b52, 0xbb994efc, 0xf883ec57, 0xbf09b2dd, 0x2c067c93,
-	0x378eef0b, 0x89bf7ac9, 0x3f714663, 0x7ef3d618, 0xf220f99f, 0x6e28decd,
-	0x361b4ecf, 0x43e50a30, 0xceb46667, 0x4facfc06, 0x4af7732a, 0xc6abf6c0,
-	0xc9a17b61, 0xe08ca7d2, 0xf42e88cb, 0xb8feee49, 0xfe8fec4e, 0x35b18f11,
-	0x87d806e1, 0xee950de7, 0x45067803, 0xcbc5c27b, 0xe5c5ef2f, 0x8d97bbb9,
-	0x0757b1e0, 0xaff5cceb, 0x760fce43, 0x180e82fd, 0x94d2c8ef, 0x30380fc1,
-	0x5d78531e, 0xfcff04af, 0xa33c92b3, 0xa23fe702, 0x68f07d63, 0x18ebb171,
-	0x1d71f02e, 0xf74a06c2, 0x80b7a028, 0x31e4def3, 0xa9f541d1, 0x15cc71c5,
-	0x9a9dbfe8, 0xb1bf541a, 0xffa83b34, 0x07fa33cd, 0xea689f3d, 0xb00bafc8,
-	0x97b67b67, 0x5a9f04bc, 0xed0a258b, 0xbe5a4fba, 0xb416e0f9, 0x4eaa3703,
-	0xef6759b4, 0x48c1f4dc, 0xf00675e8, 0x497e471b, 0x3ed1f907, 0x7a747997,
-	0x7e303e97, 0x50758a74, 0xd73ca2be, 0x68dc6c5e, 0xf29dadae, 0x78ae7f09,
-	0xe25ebcd1, 0x72cb9bfc, 0xa99e3f51, 0x79fc9f7b, 0xcfbe6635, 0xe21e2f53,
-	0xbd442ddf, 0x357f7402, 0xe2f688be, 0xc0fc1039, 0x0e3b45ff, 0x86cd9c51,
-	0xf7b44dc1, 0xf1e9e6d3, 0x942d64fe, 0x81c65fa8, 0xba018adc, 0x036368e9,
-	0x48de61b7, 0xe5db85a6, 0xbf90a6e7, 0xf7146f7c, 0x8c4decfb, 0xcc48efa5,
-	0xda86b86d, 0xd345ce6b, 0x1da96ff8, 0xfa2f28e3, 0x13e28505, 0x2da75313,
-	0x8decfdc5, 0x1db80ef2, 0xe7f89de6, 0xdc23c7ab, 0x7bf1b66a, 0x77d51302,
-	0x5941e7f2, 0xbd0d78d5, 0x7b65513f, 0x621fb015, 0xe342ddce, 0x001b444e,
-	0xcb50eaea, 0x5597a803, 0x3f9f6b63, 0x5a31bca0, 0x9ed4de48, 0x26f7a48b,
-	0xfdfd7114, 0x0c4f217b, 0x635d7c9d, 0xe7a24dcf, 0xbd7c2e92, 0xf7f282b2,
-	0xf51b090d, 0x4321bdf8, 0xaffd42a7, 0x4a9fd73d, 0xfa37dfb9, 0x2fbe91fd,
-	0x7af84860, 0xbe8de61c, 0xc8d8af11, 0xe3c8d12c, 0x62c375b3, 0xd5791858,
-	0x9e39cf3d, 0xc73a6c6f, 0x3bff8ff3, 0xe417f5cd, 0x9d4592c3, 0x31178c7a,
-	0xe10d8473, 0xd8305255, 0x67c01151, 0x8c9baeea, 0xeac31f88, 0xafa88db7,
-	0x0516504d, 0xf916af3c, 0xdd795a58, 0xfc83e422, 0x3fd49b8e, 0xd106792c,
-	0x4136ade7, 0x9e8f82a0, 0xdf2c7c16, 0x0e33a0ef, 0xf73b71e0, 0x79a6b7f3,
-	0xd13942de, 0x7c6ec851, 0x4767e49e, 0x7e69c606, 0x9e03f5ae, 0x1bb21423,
-	0xbeaf293b, 0xc3a1c0a4, 0xdd7bc0f8, 0xf3f3877a, 0x26d1f685, 0xca96fdf6,
-	0x6fb8e216, 0x1d97f2fd, 0xedaf182e, 0xd43cbcee, 0xcfde720b, 0x0b7bf17a,
-	0x1e75d6cc, 0x2fb587cf, 0xef903b47, 0x0ce1e227, 0x4d3ba2e3, 0x76816e74,
-	0xbed4778a, 0xef0a7a6c, 0xe15ad5bb, 0x17f30afc, 0x8ad912bd, 0x4af6dc74,
-	0xc7f51ea4, 0x9f3dbd1d, 0x5e8a7c21, 0xcf063be9, 0x9316ae8b, 0xe3fd919e,
-	0xb6f24a3a, 0x485ef587, 0x4ce9697e, 0x81a7a7f2, 0xa0994bf3, 0x7fc172d3,
-	0x6747c11e, 0x0f8892eb, 0x45822ecf, 0x91753c63, 0xda1b7032, 0x7d0b0e0b,
-	0xe5f24e97, 0x411f3c44, 0xb1fec4fb, 0xeaa18f74, 0x1f106c5c, 0x14cb9f56,
-	0xed471dfc, 0x05cadf92, 0x7d84989f, 0xb5d04331, 0x3f245bb4, 0x624f74b2,
-	0x6263ec2a, 0x95bdf03d, 0xc8f9fee2, 0x31ba7e4f, 0x80be90da, 0x022b926e,
-	0xedbea7f8, 0x8a768626, 0x744dde29, 0x40ca0333, 0xb766653b, 0x971b629d,
-	0x592feb08, 0x7bc3a996, 0x6a79f29b, 0x7fd1a5ea, 0x27c8aa44, 0xa0e6b730,
-	0x8ba86b5d, 0x9a7de274, 0x1e3cf133, 0x87057f34, 0xbb837ce3, 0xf98ced08,
-	0x3fe4284f, 0xe503fb43, 0x7503d0d2, 0xcabf40c6, 0x5106e74d, 0xb9ca7d3c,
-	0x2634a8cb, 0x38472e7b, 0x5ebb9d94, 0x8fd06be0, 0x710e3f8a, 0xc192bf71,
-	0xc86e7267, 0x4792bf44, 0x4f1f3c45, 0x0347b667, 0x546b7de3, 0xb8c98ff2,
-	0x9933f4a4, 0x804fdef0, 0xdf46fd3e, 0xa3df4198, 0x0a9dfad1, 0xb93ffeb9,
-	0xbffa40d1, 0xa19dedaa, 0x79fe783a, 0xf5092ba6, 0xa7837ac9, 0x6733f708,
-	0x0339efb2, 0xb83ee7d4, 0xe1dc3ad5, 0xbeb36787, 0x69f50735, 0xfd11c033,
-	0xd52bcd5f, 0xf76e3ef1, 0x1a38f344, 0xcf496fa7, 0x739f3a5a, 0x73e09b2e,
-	0x7a44ceb6, 0x2dd02ce8, 0x5243d00b, 0x2f3948ef, 0xeba48ff5, 0x5f973d6a,
-	0xca18e6d5, 0x9debf323, 0xa442ee49, 0x1f3c7ebb, 0x9e77afd0, 0xf902355a,
-	0xe53c74e0, 0x21bd4b5d, 0xc585e0f9, 0x244794c9, 0x03e492f5, 0x7ca5cf29,
-	0xf52f7497, 0xfd3fe8d6, 0xc3bfd6ef, 0x3cd293af, 0x7d02a577, 0xfae7ab5d,
-	0x85bd5aeb, 0xfc6c67e8, 0xcdd23d24, 0x43d1cbc5, 0x0a1e8e42, 0x3d35a392,
-	0xa94581e8, 0x1c5e7e52, 0x7c11cc1f, 0xedc4de33, 0x81f39448, 0x8da6b5e3,
-	0xb1f7087e, 0xd9eb953a, 0x3ddd6b9f, 0xa9d5ffc9, 0x97ff2697, 0xfc9c5ea4,
-	0xfe54efff, 0xbcad0a9d, 0xa3710fc7, 0xf3bd3fbc, 0x83ea1f72, 0x03f40c83,
-	0x6896c1ea, 0x0fa126c7, 0xc5445f48, 0x1f487ef8, 0xfe9ef614, 0xf5e1a9df,
-	0xff6c66c1, 0xd240fab1, 0xc91be497, 0xb42f9227, 0x62f9247c, 0xbce16fc2,
-	0x8b7a7888, 0xd6aa8fdf, 0x0e289b7b, 0x8c1e88e9, 0xc76dd9fc, 0xdf88536d,
-	0xe084f442, 0x04bf3f1f, 0x1fc90deb, 0xff245f92, 0x98fe0b54, 0xf243f829,
-	0xf9b56ec5, 0x0a9811d1, 0x08f9e690, 0x93e488e5, 0xfab5e7aa, 0x42ba47a1,
-	0x199b234f, 0xae90c75f, 0xa40ca1aa, 0xfc0f532b, 0xf512f070, 0xa48bbec2,
-	0xf3feafa7, 0x0f55f4f4, 0xa7e674f4, 0x1da853d0, 0x03be61fb, 0x1f3673d6,
-	0x9fa66de4, 0x8dfc26de, 0x9b21fb71, 0x46f6079f, 0x35ee7df1, 0x67ff93a6,
-	0xcf3cf7c2, 0x3303da57, 0xd241bf85, 0x01d81e69, 0xf8fc4369, 0xbcc0f3c7,
-	0x847b938b, 0x877c5367, 0x3327cf11, 0x03b40ca1, 0x537fb27a, 0xee4d2ed3,
-	0x17fe8a45, 0xb480f3c2, 0x1c6edd9f, 0xaf1e1690, 0x027ed303, 0xa262275e,
-	0xb22bf92a, 0x00a35c4b, 0xba890f3f, 0xc2094fb7, 0xf902faf1, 0x2e55b2fc,
-	0xd607ca3d, 0xf475ddfd, 0xcaa5bc77, 0x31fece7a, 0x8f099eb0, 0x1d1fbf32,
-	0x151d8f9e, 0x511fedd3, 0x717fbf98, 0x95fed65a, 0x451be7a4, 0x9ea74ade,
-	0x3d4483c7, 0x8096ea1f, 0xbea6817a, 0xeab7f796, 0x3e60593b, 0x928dd209,
-	0x0eecf1cb, 0xfa601fb0, 0x2fa8b3f6, 0xff430a6c, 0x86fc6d46, 0x5ca2cf57,
-	0x6c50a1db, 0xde0e1baa, 0xfa070481, 0x07d5383e, 0xc65d77ef, 0x78dbcdd8,
-	0x43b5f6fd, 0x132f7956, 0x1bdc06e3, 0x2e2b3432, 0x502847ca, 0xa199597c,
-	0x4d3dbef0, 0x1eb913ca, 0x0214f746, 0xaf9867de, 0x77ef2977, 0xd1674de7,
-	0x4ba6adfb, 0x5186ff98, 0xac6fefe1, 0xe4c6fd10, 0xfe7d84c7, 0xe1ca9a70,
-	0x3406fc2f, 0x694d343f, 0xff9f7f0e, 0x1d2fc109, 0x78213f18, 0xfe855a4e,
-	0x84a30eed, 0xc2157bb7, 0x41632c7b, 0x9f98347e, 0xbad71bea, 0x7cf41a4b,
-	0xbc0d2ebb, 0x77bf687e, 0x03db05a5, 0x5f069bf4, 0xf7801fa6, 0x77de61dd,
-	0xfadfbf04, 0x125af843, 0xdba0bef2, 0x5d8e9259, 0xa31ef441, 0xc67d1377,
-	0xb4362bc4, 0x91dc6ba3, 0xe0bcf12b, 0x12d2cfe7, 0x138c9b82, 0xb4dff084,
-	0xc8033192, 0x6fcf124e, 0xebfc855b, 0xe7f775d6, 0x1ae928fc, 0x5c0136af,
-	0xef07f5c9, 0xeb769cbf, 0x024ff42a, 0xaa73d05d, 0xadd603eb, 0x4d66c7e5,
-	0x7f86947d, 0xfc91ff05, 0x70007d40, 0x16f941ca, 0x08e8c87f, 0x044f93a0,
-	0x7c894e9c, 0xdcd18ef2, 0xe2c8ec9e, 0x3c6977e5, 0xa099f52e, 0x9e9253cb,
-	0x90e002a2, 0xf43f4416, 0xf60221f7, 0x29ba704d, 0xbdf3f25e, 0xbfc0c525,
-	0xfcfe761d, 0x66fed67f, 0x5fcd3795, 0xcff78ed7, 0x2096f7b5, 0xf7c7ba5c,
-	0x768fda2e, 0x6e024dc4, 0x67bdaddf, 0xc08077bf, 0xbbffa273, 0xf41f40ab,
-	0xa46a9e3d, 0x3e94250f, 0x2fa50d5e, 0xfa7de6af, 0xbd3d043b, 0x7950b7ff,
-	0xcfbcd2e0, 0x17107bf0, 0x5bc0beff, 0xe3af06b1, 0xa31d7835, 0xbaca97a9,
-	0x4afe482f, 0xe3be5cb9, 0xe312fbe1, 0xd0a9afd1, 0x3d3f2475, 0x3cf4483f,
-	0x77e926d7, 0x4fd5c115, 0x47ed0fcf, 0x2cdc9dfa, 0xf491b5e9, 0xc39424cf,
-	0x29f5fc23, 0xfea88728, 0xc5c60970, 0x91eafafc, 0x6fb72855, 0x1ffd9068,
-	0x2f37fea5, 0xa6ade393, 0x8c8f12e7, 0xeefa463d, 0xafa97ca6, 0x3fb9271e,
-	0xefbf85a7, 0xfeddff4c, 0x4687e41f, 0x6ad65c0d, 0xff4d5eea, 0x6fd017d5,
-	0x2fef34cb, 0xa95f3cd2, 0xd4d1afa9, 0x2fdf821b, 0x1f10a19b, 0x38f01596,
-	0xb52f96a5, 0xef4ae1f4, 0xf5ba73b6, 0xfb2662b9, 0x26af882e, 0xb5faf3d4,
-	0x1a4b1be9, 0x75f501cc, 0x5f384a9b, 0xf7016cc0, 0x7ae6419f, 0x4307a055,
-	0x20b3720f, 0xd9b907bd, 0xf9efab4f, 0xafe07ff3, 0x0a371429, 0xab764bb2,
-	0x5536f5c1, 0x75bbdbac, 0x810182ff, 0x4be7d5f1, 0x63dd5cf0, 0x5cdbc71c,
-	0x2ed02632, 0xae25cd62, 0xfeca7d80, 0x5efbbee3, 0xeb3cf9c5, 0xd1b25cfe,
-	0x114f718c, 0x12f3b4df, 0xfa8aa5f4, 0x6ff856ba, 0x2f1e61c6, 0x5aa293c6,
-	0x080fe673, 0xee6b27d8, 0xbb6cfb83, 0xb7dfe55b, 0x00fc07ab, 0x8398ca9c,
-	0x33a750f2, 0xb6a5e517, 0xfc2cc4c5, 0xf76f782f, 0xd442eadd, 0xc61707d3,
-	0x2bd35e51, 0xb17cfce9, 0xe277a63b, 0x45b7a84c, 0xb6f246df, 0x54b1feed,
-	0xcb5d52ee, 0x2d8c6cbb, 0x894af75e, 0x1e7c72f9, 0x3bba7043, 0x2592a5fd,
-	0xa6f7ef40, 0x8f7de83b, 0x03b896dd, 0x0c07eded, 0x0e043714, 0xe7e89278,
-	0x3c60d341, 0xe92d976f, 0xf2b1714f, 0xc38d26c7, 0xf7e5a47b, 0xd25e2819,
-	0x9f91b3a9, 0x58c0f3c8, 0xb19a93ca, 0xabde944c, 0xdfe57ca9, 0x7bc7ac7f,
-	0x14eb5da6, 0x55cd4efa, 0x6dff375f, 0x1b2bd410, 0xc67ee9b2, 0x9474e7cb,
-	0x9ae9fe17, 0x53cc3ebe, 0x47591c3e, 0x9fd0a5f9, 0x9e56bbee, 0xc92fec77,
-	0x0daafec7, 0x428e3853, 0x47cfda3b, 0xe14fa857, 0xab32ce3d, 0xbbf30a25,
-	0xc8c77e8f, 0x3ef473af, 0xe6ef7d13, 0xd6e7b353, 0x8f74f135, 0x767d2d09,
-	0x15587154, 0xf4dac380, 0x29c925fd, 0xf8126ed8, 0x032d6fdc, 0x75d32f3e,
-	0x93e90fd3, 0x5f5e588a, 0x92cdeebb, 0xa38fb04d, 0x7ca5f44f, 0xd70c84b1,
-	0xd78074ba, 0x93d70ce1, 0xd9fb8a54, 0xc79bfcaf, 0x593a5f25, 0xb5f4889e,
-	0xcbf5d059, 0x0313cae7, 0xc5416eff, 0xc1d13d29, 0x02c7462b, 0x5469eefa,
-	0x6ce782ba, 0xf43883a0, 0xe710cf9b, 0x85e7a016, 0x57d8c35b, 0x3db9d34b,
-	0x84dbf6d6, 0xba208e51, 0x29e498fe, 0xfea0379d, 0xa447fa62, 0x16988ee7,
-	0x77752e62, 0x1ddb243e, 0x34327049, 0x3322fa45, 0x1aea7fd1, 0x4ff3a2e7,
-	0x96c99f73, 0xfd143e00, 0xfcf2f13f, 0x3fa04fdf, 0xf13efb9e, 0x604b3ffe,
-	0xaff6433c, 0x68bc5ab4, 0x58b31c5c, 0x838f88f4, 0x3147c5fa, 0x9d62ad3f,
-	0xc540f481, 0x5d4584ba, 0x6e807f28, 0xdda6bfd0, 0xc0c32997, 0xc63d18fd,
-	0x192f3f57, 0x5e781693, 0xbbf24139, 0x377cbe27, 0xc6c944fd, 0x65f33d01,
-	0xa7cb8da5, 0xf7f8eb71, 0x58872b75, 0x7bbf74f4, 0xe89babdd, 0xc8bcf01e,
-	0x5157bc5c, 0xf844ceb9, 0xbc58b4ea, 0xbef12bb6, 0x0b1f4581, 0xae74a1e5,
-	0x0e19f54f, 0xca9147c2, 0x54b911f4, 0x190a3dd2, 0xf0b13c3f, 0x1d31c7d1,
-	0xbbe673f3, 0xefc0187e, 0xe9d38b8c, 0xf92a6d99, 0xc4f1b51f, 0x1ab7d7ea,
-	0x888fd90b, 0x4710f627, 0xe29d62ac, 0xe3e1e2bb, 0xe238da89, 0xbdc5d2bf,
-	0xa238eeb3, 0x5187be81, 0x4588e229, 0x7f5a156b, 0xbdfe42e5, 0xee38a292,
-	0x18b23e3f, 0xed2fa0e8, 0xc5cb6bdf, 0x7fae693c, 0x8be2992a, 0x5eaf5f80,
-	0x99fc8f3b, 0x5e1ce975, 0xb03be265, 0x199d2387, 0x58afde78, 0xae704917,
-	0x07f6727c, 0x7de3e44f, 0x81f189c0, 0xa09b6be7, 0xe19f180f, 0xce39683d,
-	0xd0f725b1, 0xd68b6777, 0xf31939c3, 0x73d963b4, 0xde226537, 0xde303252,
-	0x2e55fb29, 0xef0fbbbd, 0xd86ce707, 0x950ad977, 0xbb6b0f7f, 0xf021f489,
-	0xb80b327c, 0xd9633e2f, 0xd72346eb, 0xa8792c67, 0xfe1db3b0, 0xc29f6cfb,
-	0x4104fc73, 0x26b7b8ad, 0x5bef27e1, 0xf7f8e995, 0x0a754b36, 0x8902c3dd,
-	0x7e97f746, 0xa3fdc191, 0xcedc1979, 0xd270cb2d, 0x55ea9e3d, 0x4cd2e726,
-	0xbdf74e3e, 0x55e73875, 0x282a3aeb, 0x1317f9ae, 0x976a57f9, 0xad22ba45,
-	0xf9e31f3c, 0xad779401, 0xaa3c0237, 0xfc6e5c1c, 0xad63d042, 0x94d5d263,
-	0x0767ae9f, 0x5607eff0, 0xac9cb85b, 0x9bb8058e, 0x86e90139, 0x1939f7e2,
-	0xb8e253e5, 0xe6028329, 0x8c3b4457, 0xc7fab0e3, 0x0d63abdd, 0xfec1a7e8,
-	0x38420f97, 0x237f5dc6, 0x9559efae, 0xb4801af8, 0xbfed00aa, 0x3c3cd567,
-	0xd8ad9777, 0xf0e50e3d, 0xf1832ddc, 0x7b2b0546, 0x23d25dee, 0x3bfe0573,
-	0x395a3e45, 0x81bbf1d4, 0xb9706437, 0xdfb951e9, 0x2f0106e8, 0x79f20749,
-	0xf7030af5, 0x47bc83e3, 0xe4bd5301, 0xdab71a43, 0x728891d2, 0x81bb7ab8,
-	0x8cdf87ee, 0x973806eb, 0x751f492f, 0xdcaae800, 0x51df4310, 0x344ef2ad,
-	0x51aabd62, 0xbdffbaa1, 0xd3a40c84, 0x60bd962f, 0x1c39fa45, 0xfa839ad9,
-	0xa45e6ba9, 0xda29ee93, 0x8beedfb8, 0xaf743965, 0xc3ad8669, 0x9965df82,
-	0x8edb20b1, 0xada0fc72, 0x0fcf88d5, 0xb0ea6736, 0x46d9b2ee, 0xbfa5dd61,
-	0x885fea92, 0x41fa177c, 0x9e3852ba, 0x1b769aab, 0xdd2feff1, 0xd4e2e82b,
-	0x41f6efb3, 0x4675503f, 0x2fd41f47, 0x527d0740, 0x28cfce11, 0x9a6b9fa4,
-	0xa4bc1e78, 0x03a41a83, 0x8239bbe0, 0xbdb66a0e, 0x43f21770, 0x373fe20d,
-	0x9e808e94, 0xf9fda9db, 0x7f18e30d, 0x44e91dbf, 0x2fa833ea, 0xce3fa033,
-	0x058bebc8, 0x0c7da1fe, 0xe00ef76f, 0xf9dd75f9, 0xd07c4108, 0x66d77e13,
-	0x4c3e04e8, 0x8ad77724, 0xd8ae76fd, 0x9dfc456e, 0x1ef7767a, 0x3f54b78c,
-	0x11dada0f, 0x3c041f86, 0x56ff716a, 0x19d93f5a, 0xab5fb8b5, 0x74ddff7f,
-	0x96b0f82f, 0xfdc9fdf1, 0xfec5ead6, 0xfef173e5, 0x2acfb13a, 0xadb5e026,
-	0xc13be72f, 0xf4c7c867, 0x3fb121dd, 0xbbf83d8f, 0xfec5bbba, 0x6cc9449a,
-	0x0f8456cd, 0x0fe517e2, 0x28cb8fd0, 0x397409e5, 0xe50365b5, 0xc97c4bf7,
-	0xd7efbff5, 0x93fc2e2b, 0x9d8f1254, 0xb6f77c3d, 0xa1c9f045, 0x763292fb,
-	0xd8befc00, 0x240d9f4c, 0xcc07d57a, 0xce46e927, 0x49a7f457, 0x61bee2d7,
-	0x5f1c56fc, 0x1bd07bce, 0x0e71c7ad, 0x721fce32, 0x8b2f92fd, 0x3b5da7ea,
-	0x4efd8ad8, 0x5ed1b259, 0x3f7c7811, 0xbbef46c3, 0xf7806ed0, 0xf2143b5d,
-	0xe7121f5f, 0xbdf743fd, 0xe01f2d60, 0xc577f7a7, 0xe19d25ba, 0xe4c9fa0f,
-	0xb9daf77a, 0x6ebb583f, 0xbae48729, 0xe1bfee8b, 0xeb976c5a, 0x2051f8c7,
-	0x4a384a9d, 0xfaf7957a, 0x344b74b4, 0xdaaaf527, 0xa6d77d33, 0x9dfca21d,
-	0x78ed7690, 0x2c3a3ec2, 0x9ebbcdf2, 0xe77df956, 0x41edc965, 0x33188ef7,
-	0x259fea07, 0x15b6aef3, 0x49b73c62, 0x521e7ba1, 0x4acfc0af, 0x923e807d,
-	0xdef0c1f6, 0x36a57f3c, 0xf10275de, 0x63bc7559, 0x44927e1c, 0x7d57a5da,
-	0xa0c6aadd, 0xcf1b6aff, 0x53749383, 0xf89db275, 0x93dc5aa1, 0xeef15b2a,
-	0xf74861c4, 0xce281b4f, 0x58df7653, 0xb3fbda23, 0x8a1f4d37, 0x127bc0e0,
-	0x6c4fdf28, 0xe047921c, 0xebc4b661, 0xc6c4bef1, 0xbfc7af47, 0x87633a5f,
-	0xc1a1df4a, 0xcb8f9071, 0x7f23c8ee, 0xcec8e1eb, 0xaed02389, 0x436ab5ff,
-	0xa6e47ebb, 0xffb08b21, 0x58ef4b48, 0xc6d078fa, 0xf4bbaa38, 0xa427a431,
-	0x03f32c1d, 0x90bdc5eb, 0xaf9cdeec, 0x8a97757a, 0xefac0bc8, 0xaef9f183,
-	0xddf4910d, 0xa3a352a8, 0xdbe715b9, 0x8ee74499, 0x2526385a, 0x2b9ee9db,
-	0x8cb369d9, 0x9725222c, 0x453023da, 0xc74375f9, 0x5e4fa81d, 0x1832c3bf,
-	0xd4cb8bbf, 0xb9cb43f3, 0x90e3cd7d, 0x61dfc171, 0xeac8eb92, 0x3b57e9cd,
-	0x2f7f7c9e, 0x74ec2b9e, 0x3fde919f, 0xebe9ecb1, 0xd89e1f51, 0x7dc7639c,
-	0x4919db1f, 0x198e0bf7, 0x78e7bf82, 0xb4c2f7a9, 0x3de4a9f7, 0xc1defcd7,
-	0xfba49cf6, 0xb9cbde0b, 0x98f2d2ec, 0x74662e4e, 0x065cfc4f, 0xe8e4fee3,
-	0x7e62b6ef, 0xc9a34561, 0x8e64f786, 0x7c63fd20, 0xdf4abb6b, 0xdfbba201,
-	0xdb23af80, 0x703ee8f3, 0x5ebcc7c5, 0xf0f8acd1, 0xc3fb72fe, 0xc2fe53f7,
-	0xf137b04c, 0x3db7796a, 0xebe1fabd, 0x38ce0d91, 0x3bf1cb3d, 0xf3366700,
-	0xef908b7c, 0x75bebc3a, 0xffe38a4f, 0xfd2cfdbf, 0x077bd313, 0xf09347df,
-	0x57aae796, 0x720a2e80, 0x72fbf0fd, 0x9fb22cf1, 0x50f62e4f, 0xb4395a79,
-	0xb3d2246a, 0x15ee8625, 0x51e3b4bc, 0x5373bf15, 0x79f06dbd, 0x308f1f3c,
-	0x9ff7d0c7, 0x90bc5cbe, 0x17279a82, 0x8a3f89d7, 0x15f854b6, 0xb55e547c,
-	0xfbde8dad, 0x0b5e4772, 0xd97debde, 0x9ac5c31c, 0x3be820ab, 0x3dbf1299,
-	0xfb9657dd, 0x1cd7fcfa, 0x9fdd72cf, 0xc56e9e6f, 0x21fdb57d, 0xe23865ae,
-	0x86c63a37, 0xc8a56076, 0x86ba392f, 0x23c7d9db, 0x18abfe62, 0xed7c7cf0,
-	0x0efc4494, 0xa9b6ccd1, 0xc57b63d7, 0xe786c54e, 0x49cee703, 0x7dcf3c56,
-	0xe2b4efa6, 0xd6cfaa3d, 0x3e57fbc8, 0x237bbbfa, 0xd829b3c6, 0x9eab447f,
-	0x84293239, 0xfc32f44c, 0xcbee9ea4, 0xe4ed017e, 0x451f393f, 0x89f813fe,
-	0x99927cc3, 0x4bbf722f, 0x9c57f9f7, 0x7d8a46ff, 0xcbb6f7b7, 0x17b506f8,
-	0x63f6f015, 0xd096b76b, 0x68de4fdf, 0xbfbae1b0, 0xf1a068dc, 0x4db9c0e7,
-	0xbe3deb07, 0xb0839f99, 0x13e8e78e, 0x6779f99b, 0xef3f334e, 0xb833cf54,
-	0x60d2fdf8, 0xe80a2cba, 0xeb2ddf47, 0x7323bbe1, 0x737f7c5c, 0x7ee27f40,
-	0xb1bf442f, 0x9fee99ac, 0xa93e6a5d, 0xaaff7e96, 0x74dd1791, 0x08bd13db,
-	0x23ff22b8, 0x98ba4add, 0xf5c786b3, 0x0b83cded, 0x9d24fe91, 0x5803bf68,
-	0x3bfc646f, 0xfa28bab2, 0xb324f7ee, 0x62fa80c3, 0x18e77c4a, 0x075f4f04,
-	0x916aaf97, 0xe4f785ce, 0xec29bd58, 0x15dec477, 0xbc1a78f2, 0x7abbf74b,
-	0xcff7f8db, 0x59317dc4, 0x474abe82, 0xda293e7d, 0xba038dfe, 0xf2ffae74,
-	0xf5d03d3a, 0x3bf691a4, 0xd7809db2, 0x7af35ff5, 0x167b7d9e, 0x7def3fd4,
-	0xec3d3af6, 0xf695d26f, 0x2fa80621, 0x75cdf259, 0xc9b9e063, 0x3bd83ae1,
-	0x9b139e60, 0x7f71d292, 0xdb087ed0, 0x8e7a27a7, 0xee2b5960, 0xba569d8f,
-	0xf4cc2d06, 0xa77b7ff7, 0x0e4be0e5, 0xc0d3bd7f, 0xa73bbbe8, 0x87f5cb7b,
-	0xd70e9d2f, 0xa109dea9, 0xdd8ce5ed, 0x5e7cf947, 0x7e076f7e, 0x788911dc,
-	0x5dd38aaf, 0xd3c7bcb9, 0xe3c7b9a0, 0xe4d5f7e4, 0x7f792afd, 0xfdff72ea,
-	0x7297b5b3, 0x00ffecff, 0x4fb2f369, 0x00008000, 0x00088b1f, 0x00000000,
-	0x7de5ff00, 0x5554740b, 0x55b9e896, 0x2a493eb7, 0x54842549, 0xaa84a925,
-	0xc0902b7c, 0x310c7c25, 0x0403e548, 0x6a285888, 0xa205a0d4, 0x01148280,
-	0x55f4741d, 0x9a7c3061, 0x179f8ee9, 0x102d4622, 0xdd787195, 0x866db1d1,
-	0x3220538f, 0xb40e9afc, 0xd38ceb63, 0x68d1d01d, 0x38311b63, 0x6f360cf4,
-	0x4dce7def, 0x802a56ea, 0x6f7be7be, 0xf65e97ad, 0xee739f61, 0xffb3ecf9,
-	0x5f5bdf67, 0xa5eb2c19, 0x0f24c664, 0xa153ab63, 0x63595a74, 0xff7b9419,
-	0x68d2cfe9, 0xac839ac6, 0xc18f2e3b, 0xd3f5a35f, 0x7ccf5051, 0x2e504bba,
-	0xcd1a484b, 0x139960c6, 0x996fd062, 0x12aeb189, 0x6d3b26e8, 0x12d8c2cc,
-	0x019dfe09, 0x19caf9ff, 0x956c674b, 0x44edfe15, 0xf08742b8, 0x7f466683,
-	0x3f98059f, 0x1fd8c0df, 0x3925744f, 0x9d9d8cf5, 0xbb0c2e1d, 0xbc65fb18,
-	0x009ce6cf, 0x8ecd1ded, 0xbec634a6, 0xd4a4c37c, 0xd09eff43, 0x60f927df,
-	0xe67aa5fc, 0x6d9284ef, 0x24d8ce1f, 0xc3ea2f28, 0x61dfa053, 0x8db6f157,
-	0xa9cbbcf0, 0x3f9e0c63, 0xfce70aeb, 0x82c678f5, 0x32f2932e, 0x32777ea3,
-	0x9f1eeb80, 0x9dfb1c3e, 0xfe5d7d7d, 0x936eb03d, 0xec1258cc, 0x598c067b,
-	0x0030780e, 0x07c32fac, 0xb40e3442, 0xbea09307, 0x0e74f5c5, 0x2f307c23,
-	0x0dd8c89b, 0x06ebef8c, 0xf11fbc39, 0x196494c5, 0x6f9b37f7, 0x3283db0f,
-	0x3333a38c, 0x98bbae03, 0x4d3f5875, 0x8eb19800, 0x7f60c34b, 0x3263c066,
-	0x24c78096, 0xa1eaa6c6, 0xe9afac13, 0x0990fa97, 0x7884d7d6, 0x85d07014,
-	0xd72c7a23, 0xc58bf8c3, 0xbc8ecbbc, 0x58c1c46b, 0xeb07fe10, 0x5de62259,
-	0x3d7771dc, 0x9092cb9e, 0xc0b74ce1, 0x7ffa25f5, 0x72c79d0f, 0xf2feefd1,
-	0xe29c46ad, 0x7eda1dfe, 0xafa6d9cb, 0x52fcf0f5, 0xfdc46dd6, 0x6a8ceb2e,
-	0x0cf9a8ef, 0x977cbbd7, 0x99debeb6, 0xc2748698, 0x97b1b2c6, 0xe74d54f4,
-	0x99f448bd, 0xca746faa, 0x66e19fb8, 0x371304c5, 0xf4479f3d, 0xb00cdec2,
-	0x63ac7ec8, 0x8b4fd118, 0xb1e74f4b, 0x9cc49764, 0x7ebb18e3, 0x42731657,
-	0x61aefd53, 0xc85d2654, 0x5fcffaa0, 0x57de3639, 0xd75e7032, 0xc6ab6abf,
-	0x6aff5df5, 0x3aea9511, 0x4e1d049a, 0x867497d5, 0x2ce71d61, 0x9b800eb0,
-	0x8162c08e, 0xd66e9a7e, 0x99e11887, 0x57bfb199, 0x596bc72c, 0x424fa5df,
-	0xfd8a0e58, 0x3a24974a, 0x1f3c6484, 0x433d61ef, 0x031e627a, 0x79993bb5,
-	0xa05ca5cd, 0x398ebb1b, 0x24dfe063, 0x19ce2fce, 0x81ee9ccf, 0xfc583976,
-	0x87584ab3, 0x0941ae61, 0x5c737b41, 0x33e436d2, 0xe574f416, 0xe20d73c3,
-	0x4e38aeb9, 0x54ee0937, 0x1d2af3cd, 0xadfa2adc, 0x18769a4b, 0xb3c1b2e9,
-	0x5121e888, 0xc7acd4c9, 0x406a5fa4, 0x67d5b9fa, 0x623ba4f8, 0x585fa21c,
-	0x295e0dc7, 0x7378fc84, 0x50ddb683, 0x44ad75f9, 0x8e47d425, 0xfbf6d5e7,
-	0xd003d229, 0x717e103b, 0x9c0c3d24, 0xc3a3c583, 0x1224f073, 0xb9cccbbd,
-	0x5be012b9, 0xee181b0e, 0xf7cf14df, 0x97310e79, 0x0f80fd86, 0x8875e260,
-	0x2e4fa817, 0xc537e2d7, 0xb0e7c5a3, 0x867e2d3a, 0xb7fbb57b, 0xda6ae435,
-	0x35237c33, 0xcb8b59ed, 0xbfb67034, 0xc47fd342, 0xec0d6aea, 0xf4d4ce0a,
-	0xa37f5bcf, 0xbd682e06, 0xa8bfd35d, 0xbda6817d, 0xa69f7438, 0x268ed47d,
-	0xf9da5c0d, 0x98ffa688, 0xda6b8f5d, 0x6a3786c7, 0x7e1dc7da, 0xe84f034a,
-	0x7fe9a2da, 0x34db07cd, 0x5fba93ed, 0xdb5fb4d3, 0x9e0686f3, 0xd35bbbdc,
-	0x0385ca7f, 0x1d8ab81a, 0x31aff4d3, 0x4f0356ff, 0xa6abfeb5, 0xc7fb74ff,
-	0xce19f69a, 0x67da6a3f, 0xd2d1bfb9, 0x93973c6b, 0xa5ff2bd7, 0x9359ee79,
-	0x5f50dfef, 0xdd954b34, 0xebf48641, 0x35ba3e24, 0x0184a74d, 0x972a83fe,
-	0x1c9e1d04, 0xc1392561, 0xb78e59f2, 0x32b0e914, 0x6e7c7c8c, 0xe0f24497,
-	0x28bd28ab, 0x91ebd1ff, 0x4afd9da0, 0x22765e52, 0xc45d41dd, 0x331e29fc,
-	0x39d62393, 0x81aaceac, 0x9aed7b87, 0xa706b6fe, 0xe7c33da6, 0x2d67b4d6,
-	0xb6703456, 0x7fd35cbf, 0x068f6ac4, 0x34eb0576, 0x7bd6f3fd, 0x6b417035,
-	0x517fa683, 0x5ed34fbb, 0x69ac5a1c, 0xafc3b51f, 0x573b4b81, 0xd98ffa6b,
-	0x8fb4d415, 0xb4d7af0d, 0xaadc3b8f, 0xb5742781, 0xf35ffa6b, 0x3ed34841,
-	0xa6877ba9, 0x4e9edafd, 0x77b93c0d, 0x94ffa697, 0x5c0d610b, 0xfa688ec5,
-	0x6a4f98d7, 0x0fd6a9e0, 0xdba7fd35, 0x67da6b4f, 0xb4d73f38, 0x2cd076ab,
-	0x7adad7f7, 0xaf5d1761, 0x7cf359fc, 0x90c3dab0, 0x486f823e, 0xd613b34a,
-	0x3fe102eb, 0x777ce49c, 0x28ed1e9c, 0x8c14182f, 0x41ad2901, 0x420c92fd,
-	0x480ae90c, 0xe2a6358c, 0x20ac4028, 0xc15549b7, 0x4f68c9f3, 0x73aa9000,
-	0x1fa0fcb9, 0xeb5ad813, 0x1bb266a7, 0xdf40971c, 0x29bfc25d, 0xa0944b83,
-	0x85ebaa9f, 0x4ea166f9, 0x726f3a02, 0x582e3cf9, 0xaf9d7dcf, 0x6862cb4f,
-	0x705b0427, 0x9307a01d, 0x9e6f41bb, 0x79776388, 0x378f064b, 0x89780cc3,
-	0x5c48ef98, 0x32cca3ab, 0xcc33fcf4, 0xff7fa967, 0xae3e06b8, 0x8a6bfb04,
-	0xa0a7ff18, 0xfbb065ee, 0x37c0035a, 0x153d8c05, 0x4cfc12b0, 0x5b704ec0,
-	0x7b6549c0, 0x96e54dc0, 0x1ded4280, 0x5f827281, 0x0e087808, 0xdca8ea05,
-	0xfd52f016, 0xc10340f6, 0x547c04af, 0xa62c08ee, 0x9f80b5f2, 0x560677da,
-	0x40f3fc13, 0xc0ceca90, 0x237faa7a, 0x9bf04ad0, 0xdf827681, 0xdca8840a,
-	0xe541d815, 0xb52740ee, 0x22ec0def, 0x9840edf8, 0x30e070e0, 0x5d0207c1,
-	0x7c0c1f04, 0x40a1f040, 0x03879537, 0x0d1e543d, 0xf1fb52f4, 0x078205c0,
-	0x576b4bce, 0x2e576133, 0xd2c07412, 0x2f793db8, 0x85f6523f, 0xbb462d8e,
-	0x43a09177, 0x87983543, 0xcc867740, 0x2ecd6dc2, 0x13a06a3c, 0x71c9d137,
-	0x96af2fb4, 0x4070d04e, 0x33560d7a, 0x5a9bd237, 0xc9e954b6, 0x90ae0cfe,
-	0xbb732f42, 0x336feb88, 0xb537f553, 0x85283e37, 0x079b9ed0, 0xf811b276,
-	0x9f6123e6, 0xe5c7147c, 0xc1bf39f5, 0xa35f768d, 0x66c0af14, 0xb277fe01,
-	0x8c2fe03b, 0x5ed77fa4, 0x9fb456d3, 0xc235f5d4, 0xe7183a38, 0x5a2eecbf,
-	0x6c3b2357, 0xbd40f5c0, 0x72fc0f47, 0xe2dbe6c6, 0x2fbeba02, 0x2234175b,
-	0x85425913, 0x8cc644de, 0x48f3df76, 0xf7fce7e7, 0x17c1c21c, 0x9c429559,
-	0x78537ae7, 0x7f30adf8, 0xb2bd11ef, 0x5e3439cd, 0x00ceb796, 0xf6997de1,
-	0xa0773fb7, 0x17f75f1d, 0xe1cf0fbd, 0x21b12184, 0xe9dd7404, 0x3acf8892,
-	0xd94d3a5d, 0x02fdf766, 0xa26df9d7, 0xa01d4eff, 0x56ebdbf2, 0xb612b2bc,
-	0x20a2b8d4, 0xf055ed19, 0x5f680c0f, 0x034e61cf, 0x989b87ca, 0xea1c5de7,
-	0xf823e666, 0x52a41656, 0xe176f9b6, 0x21636ebe, 0xa6157d82, 0x8afb589c,
-	0x383bd75e, 0x752c70d8, 0xdd90f29a, 0xfbc70077, 0xeb43d136, 0x7a69313a,
-	0x5d4bee21, 0x49c33997, 0xdeb366fd, 0xdf7d7017, 0x53fafbee, 0x9d306f29,
-	0x61f488fc, 0x3fb06981, 0x3779c233, 0x38e0ef03, 0x214b0fcd, 0x3e9573a4,
-	0xa74cc11a, 0x7a851ff1, 0x805e9229, 0x4b7fd04e, 0x9399cdeb, 0x4dd2f448,
-	0x3e926ff2, 0xfa7b0468, 0x28542e84, 0x8c4e89e9, 0x5173ac12, 0xee49d01a,
-	0xc0f0f4d0, 0xe423287a, 0x17d9d020, 0xfe9fde38, 0xe2371ae1, 0x93dbf96d,
-	0x66b7889c, 0xd0079c1d, 0x9ea8f073, 0x442604ec, 0xd2dafebb, 0xb207f910,
-	0xc529cca2, 0x7172e373, 0x7ead9ebf, 0x4ddc863d, 0x74f4e5c8, 0x0ba86ec2,
-	0xef9cb8d1, 0x2e7d76d5, 0x2e7d473f, 0x15a6df3f, 0xc3d52d9f, 0xf81c4ffa,
-	0x8d2ce8dc, 0x3fd58fb1, 0x823f2879, 0x3aef97ae, 0x7e83cd3d, 0xb92eeb17,
-	0xbea07131, 0xd2abcc50, 0xe898de91, 0x5c896adb, 0xc75d3f57, 0xa75d22e7,
-	0x11e75d00, 0x768a7f5d, 0x33936cf9, 0xbb2856f9, 0x28613501, 0xc95a2f7d,
-	0x14c05c7f, 0x2f32172a, 0x0c808b95, 0xc1bd8e90, 0xf7888d27, 0xd52758fb,
-	0x777e503f, 0xbdf5d23a, 0xd9f91f3a, 0xd517594b, 0xb5bd672f, 0xaf37b478,
-	0x1daef35f, 0xeb537d56, 0x44915393, 0x7fcd0c6f, 0xdb39cb17, 0x4e834fa5,
-	0x5cec93e2, 0xe4b747c0, 0xe613227f, 0xd5677dbf, 0x3f505913, 0x85cfcf5b,
-	0xa2e7e31d, 0x7de891ca, 0xe0145f03, 0x78a6dff3, 0xa4fa5f68, 0x345f0d3a,
-	0x123cce3e, 0xcfbbd38c, 0x8ae6da14, 0xfbf293e0, 0xf28590ff, 0x13bdee4c,
-	0xdbf97bcf, 0xef3c54a6, 0xfbd718fb, 0xaf8d4792, 0x119efaa8, 0xe2cfdfbd,
-	0x85f7ec15, 0xb22fefa0, 0x17f7d119, 0x658a3812, 0xcb287603, 0xf2cbd9f1,
-	0x72f6f406, 0x88d1cedd, 0x95ebd027, 0x7df70e78, 0xd632d9dc, 0x9420fa85,
-	0xe1887683, 0xecd29335, 0x7617e8d2, 0x8d850129, 0x7f3e219f, 0x198ee38a,
-	0xfca92ebc, 0xeed19fd0, 0xd0591930, 0xce7c465c, 0x677f2226, 0x9abf891a,
-	0x3879b511, 0xb7e9d78f, 0x84ff1e0c, 0xefe1ef58, 0x841d3fb8, 0xc52cbcfd,
-	0x2feb879a, 0x3cc0fc53, 0x19d24724, 0x2e4773cd, 0x3e7563e7, 0xa076e966,
-	0xc1347e9d, 0x8f9e3b77, 0xfd52471a, 0xcfaec3c8, 0x667cf1f2, 0xe5506c57,
-	0xaec78d33, 0x84e972e3, 0xf84419c1, 0x014b9544, 0x6f2fd609, 0xa7ff286f,
-	0x371d700f, 0x8c612d98, 0xc34ab077, 0x35ff7ed9, 0xdf1f4077, 0xcae3eaa0,
-	0x1a8ef8a8, 0x018a61f7, 0x3ecc57d7, 0xf141f152, 0x0e4e551d, 0xb1b0bfd2,
-	0x889fc42e, 0x79c7f597, 0xce3fb9fe, 0x8d79c3a3, 0xe6328e42, 0xf8237b77,
-	0xae00d6d4, 0x307fc68b, 0xff8d7cb3, 0xd9c0d560, 0xffa6bb7e, 0x4d4ed588,
-	0xd6e82bbb, 0x57ade7b4, 0x6b417034, 0x517fa6b9, 0x170347bb, 0xfd34ea87,
-	0x6af0ed47, 0x06ced2e0, 0xbb31ff4d, 0xb1f69a7c, 0xf69ac5e1, 0x1afd8771,
-	0x6ad74278, 0x3e6bff4d, 0x27da6a08, 0xb4d7af75, 0xaad3db5f, 0xb6f72781,
-	0xb94ffa6b, 0x57b4d210, 0xb4d5bfb1, 0xd75f98d7, 0xf1c62fc0, 0xeb54e778,
-	0x9b9e683f, 0x81afdf6e, 0xf1e7885f, 0x23ce199a, 0xf9c5e7da, 0x278b6f06,
-	0x3ee5987e, 0xffdf69a9, 0x8dcdc8c8, 0x47a12fc0, 0xb67fe474, 0xc53d71d5,
-	0x1d39aa1a, 0xd7bef1c4, 0xe66a1f2b, 0xbaf7d1cb, 0x7a9d8e90, 0x75f2266b,
-	0x039cf97e, 0xd0ac7640, 0xc51aa2b3, 0xc9eebb9d, 0xf48e5803, 0x6c8d5ebe,
-	0xf270d253, 0x7da39600, 0x1903575f, 0xca716533, 0xf996583b, 0x70d8d6c7,
-	0xbce7ab89, 0xe0c4e583, 0xb3941a8a, 0xb17e2660, 0x3e7dd608, 0x846d9238,
-	0xaa652575, 0xd10f5e71, 0x1d0caaed, 0xdbaaf9f1, 0x4b37142c, 0xa322d6bf,
-	0xe81cdf3e, 0xec10791a, 0xd3a7f4dc, 0x69dc62d7, 0xa1f9d83d, 0xc017b022,
-	0x59f2c7ee, 0xe043ebb0, 0xbb046d1c, 0x604dcb1f, 0x73fd63f7, 0x9c23f760,
-	0x7ad974fe, 0xc9d56e7c, 0x6172ea7b, 0xca0f11fc, 0xd7533456, 0x0e2b7539,
-	0x0fec7ac0, 0x4b28ad1a, 0xe267ae8c, 0xec8eb09c, 0x0a8eb065, 0x51078b42,
-	0x3052ecfd, 0x1c39321c, 0x2becfd07, 0x1db81a74, 0x2eb045ff, 0x97cf8b58,
-	0xaedee93e, 0xb6f9f630, 0x8a1937b3, 0x5d799f61, 0x014d6db7, 0xe6799738,
-	0xf1d3be02, 0x93fc602c, 0x09cd8f79, 0x97860c96, 0x48ff7a14, 0x2cee4972,
-	0x16b53e46, 0xeb81947d, 0x85fd50da, 0x3ce2b3a2, 0x0839cc8f, 0x787e7eeb,
-	0x23e758bc, 0xaff2aa73, 0x79cf5c66, 0xef50ef94, 0x47218cef, 0xffe853fe,
-	0x2f5c7993, 0xe5159fc3, 0x08938d93, 0x949d81b3, 0xf376f20c, 0xd1a7d5a4,
-	0x41ad90a7, 0xbb23e509, 0x144fcf08, 0x7823c828, 0x1e44fc4a, 0x537947b2,
-	0xe733e454, 0x1f3678c1, 0xf1914ed8, 0x785ac5b1, 0x19e79c33, 0x0c7ac0c3,
-	0x3282e977, 0x92f0c1ec, 0x9e605157, 0x5fb0798e, 0xb51b3780, 0x8e9165fe,
-	0x9f717d91, 0x378beeba, 0xdda76829, 0xf0f5c797, 0xecbb8096, 0x7ffa0313,
-	0x4027d94a, 0xfd8b9947, 0xabe40f92, 0x04abd1ad, 0xd2e19fa1, 0x2237efdf,
-	0x3ac5df61, 0xfd639f51, 0x27bb089a, 0xb86b8c47, 0x19bc27a4, 0x6a4abd9a,
-	0xbd06fcc4, 0x618cefe4, 0xc9e69577, 0x4666b9fc, 0x1e7786ed, 0x5f309c96,
-	0xba486366, 0x4bf1c687, 0xc2dbd40a, 0xb1ab3ebc, 0xf0085a53, 0x3a4e791d,
-	0xac9c7507, 0x08feb0c5, 0xa0e5d93c, 0xede78564, 0xc425068f, 0x55eadd83,
-	0xdae22258, 0x52bdfc4b, 0xf57db4f0, 0x864fb2c4, 0x8abdbae1, 0xa59be717,
-	0xcadf9bf2, 0x2b1f3d70, 0xbd42a9bf, 0xc33d1bf6, 0x9c6f8cfb, 0x8c5a724a,
-	0xa9a5a87d, 0x973ccf5b, 0x729267f1, 0x9e93f11e, 0x2ce2ddbc, 0xf17dfe00,
-	0xd6c34b36, 0x47767418, 0x75b3a71e, 0xe2deaa99, 0x73d749eb, 0xeafaa93c,
-	0x1fa72b1b, 0x4cad6e55, 0xce3ab0e1, 0x24f1ecca, 0x8f5a8637, 0xf98e3dad,
-	0x19bbd622, 0xfde2b1e6, 0xac2b77cc, 0x21f03788, 0xcc9f34bc, 0xe7d6e9e5,
-	0x4637e4dd, 0x3e20cfd3, 0x5c9bd100, 0x1dd97486, 0x31ba066a, 0x682a33cd,
-	0x5bfeda2f, 0x2472848b, 0x284ab593, 0xb5d96d47, 0xe7d46587, 0x1bd8afb2,
-	0x12be8ec3, 0xa9e7a83f, 0xcf8325da, 0x2abbf9cf, 0x0c0d43b2, 0xe5c9b6e9,
-	0xa9f9e1b4, 0x6474da74, 0xe22faa78, 0x3a0bd73c, 0x7aad672e, 0xd60ad3e4,
-	0xeb256549, 0xd63af2a2, 0x5987a54b, 0x99ab2c65, 0xf32d6542, 0xf98d3952,
-	0xad63aca9, 0x9d64ce54, 0x2eb3d654, 0xa3bfc12a, 0xe4accbd2, 0x7608de87,
-	0x9973960c, 0x985bca97, 0x482dca9f, 0xfef013df, 0xdbe095a1, 0xbb952759,
-	0x459dff80, 0x53311f18, 0x39e417b9, 0x3c836f96, 0xf20c32c7, 0xf8c269dc,
-	0x83ca9b88, 0x43ca8501, 0x0f2a7281, 0xefd43c07, 0xca8ea068, 0x952f01e3,
-	0x540d0227, 0xd47c0576, 0x316054ef, 0xfc05ef95, 0x581fbe54, 0x8107e54d,
-	0x12ff9520, 0x91654f58, 0xe20ae411, 0x163ddddb, 0x8f9c9afd, 0xe8271e8d,
-	0x84f34fa3, 0xfdd1ebff, 0x78f1e2f7, 0x83ba3a8e, 0x94aed5b1, 0x6e6d1e90,
-	0xe504279d, 0x74937746, 0x4eeb9437, 0x64d63b70, 0xd93b244b, 0x724abed6,
-	0xa4bbb8c2, 0x9c027d6e, 0x0fbcdeed, 0x4f4198e7, 0x6b65ed54, 0x7f841413,
-	0xe819a4ff, 0xdfc1ab70, 0x7fda15bb, 0xcebfd2f5, 0xaece8331, 0xc7f53c48,
-	0xed4c38d7, 0x66b20e93, 0xf207c02b, 0x26993f4e, 0x10a075f1, 0xc7d2fe3e,
-	0xe3e4d673, 0x791cb93a, 0x368e05d5, 0x5b0f19fa, 0xdb18cfc8, 0x0eac667e,
-	0x2dab49e0, 0x471fe865, 0xf5b8a3f4, 0xdba2fd50, 0x563ae7d5, 0x1e2337a4,
-	0xee0a7dd6, 0x65e51389, 0xcf8c58f7, 0xbbab8e45, 0xfe99f9ba, 0xf647f332,
-	0x5e332e93, 0x54e79151, 0x7403ffde, 0x86df4d1e, 0xaebf1f4b, 0x3598f8a3,
-	0xf6faf515, 0x7a772e14, 0xdb43e3b3, 0x53dbdd60, 0x9f21bc05, 0x610eb5f6,
-	0x8dbad7d8, 0x6fc764b9, 0x1d36f38f, 0xd1bff6c1, 0x69a0db29, 0x636fbc7b,
-	0x14f9c131, 0xea9759af, 0xca5ea377, 0xb1fae049, 0x9c48f1cd, 0xffff8233,
-	0xe6eee422, 0xadaebeca, 0xd7ad4fe8, 0x6e7802b1, 0x1b05fadb, 0x4bce30dc,
-	0x022ec09b, 0xc2f27938, 0x9ed0050d, 0x513741bb, 0xae1e642f, 0x0b4da5e3,
-	0xe128d95f, 0x0b5323b8, 0x213cdc61, 0x7586733f, 0x74095d8f, 0xc6d466de,
-	0x63f5fa15, 0x8597e73e, 0xd019cc30, 0x5e2239bf, 0x1ac0d5b1, 0x4166f522,
-	0x35b7973e, 0x4c34bc45, 0xd33cf1e1, 0xe3d0f888, 0x11aaffb0, 0xbe93fe3c,
-	0x9ff14cd6, 0x9e7fc774, 0xe9ed0e9c, 0x4d053a1d, 0x74b6d95a, 0x9efd018d,
-	0xf22758db, 0x3f8956e3, 0x76e6cc1f, 0xb92c1832, 0x1efc2273, 0xf2ca37b0,
-	0xf6a7e223, 0x7184a086, 0x4b11aa8c, 0xa7378c25, 0x3093ee3b, 0xe0de91fe,
-	0xe8897c93, 0xfda9f927, 0x2b9f22ae, 0x6f67d61f, 0xf735e784, 0x3c0cbeb1,
-	0x81b79857, 0x566409f2, 0xecdf3916, 0x27878e22, 0xb43d2064, 0x691ad7df,
-	0x9af8d15d, 0x991eaee5, 0x1ce07c3f, 0xccbfdba3, 0xfdb8e7e7, 0xf9029871,
-	0x1f8f1260, 0x9339789c, 0x6dd9e5ec, 0x23f41ef1, 0xb2393c4f, 0x2aa7e096,
-	0x9eff683c, 0x1a62b978, 0x9a9fb396, 0x484efd49, 0x05c630ec, 0xbb753f66,
-	0x7939f58c, 0xef1c2eb0, 0x71e891b4, 0x89f753f6, 0xc5a91fe7, 0xf05d72f6,
-	0x2e9fd0ef, 0x012d7e6f, 0x891505e3, 0x7961646f, 0x6abdd742, 0x837fcc3f,
-	0xd51afd95, 0xda4377b5, 0x3fc1d4df, 0x6b993ce6, 0x378c78c0, 0xf3ce973f,
-	0xf031e626, 0xf92f077c, 0xba3b95b7, 0x8e8b01de, 0x5bd9d75d, 0x9ebad783,
-	0x5883d65d, 0x34158756, 0x61ed59a3, 0xa72c41ef, 0xd16bf975, 0xa0fba9bc,
-	0xdd9620f5, 0xc45e7d23, 0xedffabff, 0x055e3796, 0xab63c478, 0xe68768ac,
-	0x633dde3f, 0x0d2fc51b, 0x60a1f90c, 0x8f55bf92, 0xa6f66c04, 0xf6787ca2,
-	0xfa875919, 0x8d6ae4dd, 0x4f74d843, 0x4ce30eae, 0x175a53db, 0xe20bbed3,
-	0x28f1e219, 0x8ba421e8, 0x2a6f1482, 0x25f013f2, 0x829dc39d, 0x7e294d3e,
-	0x8bd60a6b, 0x7efe8e7b, 0xd85e1cf1, 0x4e35afdf, 0xa55279a2, 0x08cdc4a0,
-	0x42ec23b4, 0x7f33b79f, 0x96c3e206, 0xf18adfe8, 0xce2a82ad, 0xd3912cff,
-	0x996f7605, 0x10508f48, 0x3fd5bd3e, 0xe6c1cf0b, 0xe01bcfeb, 0xb06a0774,
-	0x25c93edf, 0x367fee98, 0x39061c4b, 0x3fc2eb43, 0x5ba4e78c, 0x51cec9d2,
-	0x806b6fd7, 0x0eec22f1, 0x968dc7dc, 0xba54e781, 0xf5f620db, 0xe60b2884,
-	0xf5d4f1f3, 0x7ae7cc6e, 0xd4edd61d, 0x62f47ae1, 0x5d0fb03d, 0xfa227ac4,
-	0xd7fafed1, 0xd23b14cd, 0x897e6305, 0x4729cc97, 0xcea17fee, 0xd71a3713,
-	0x615fd6ff, 0xe509295c, 0x67f3ac08, 0x919927fb, 0xf1f7a34f, 0xfb88be42,
-	0xfe8cbd80, 0xe71f4cc3, 0xbf46e6df, 0x0d94fe84, 0x43bfdc61, 0xd45c60f6,
-	0x0c926966, 0x39b5fb11, 0xd99e9eb8, 0x728fdfe8, 0x82796665, 0x8b3df482,
-	0x72b5ae75, 0x0f983efe, 0xfd622beb, 0x7136167f, 0xfe7c4ec0, 0xe24ef799,
-	0x67583a91, 0xcfea3155, 0xbca5eec7, 0xcc8fcd89, 0xcfeb8c3c, 0x3fb93f74,
-	0x7ef40615, 0x3e7dce2d, 0x77656f8f, 0x87bc9ac8, 0xc9acbf2c, 0xac58c88b,
-	0xd07a076d, 0xd95d2ac0, 0xa829d5a5, 0x2509746f, 0x9da06733, 0xf923a492,
-	0x9a4a720e, 0x8d1ed31b, 0x7f812ba2, 0xcdde7cf5, 0xb373a7cf, 0xb039f859,
-	0x737cc55e, 0x7aacd8a2, 0x336f304e, 0xd03279b0, 0x3ead737d, 0x8f1fa124,
-	0xb232f1fd, 0x26f70d97, 0xada73e0e, 0x19cce706, 0xd41fa728, 0x2aaf2959,
-	0x67a0af0a, 0x94fc99fe, 0x1da8d307, 0xc53365ea, 0xabd6233d, 0xcf6b058f,
-	0x3bfd4ae3, 0x0cce7858, 0x4cfae0d7, 0xa899dcc7, 0x32973367, 0xf6e8ff3a,
-	0xe7b547a2, 0x78ef7e4a, 0x50b1a38c, 0xe79c07f8, 0x5af6c74c, 0xcfa3efb4,
-	0x9cbba555, 0xc2f5b161, 0x2f5c0523, 0xa72824e4, 0x90aec8ea, 0x66f04ec9,
-	0xfd23c3cb, 0xb9f2efa4, 0x57e5301f, 0xec43d216, 0x1f087363, 0x3f5dc255,
-	0xa8738629, 0xfba1d3ee, 0x7e3ddec2, 0x5099e9e0, 0x7bf5fd4e, 0xdfa0c74d,
-	0xe32cefd4, 0xeb377eb0, 0xa081819e, 0xf90361e0, 0x7cbe6b8d, 0x440315a5,
-	0x414c8dcd, 0xe3ceabbd, 0x6efae028, 0x25e4218f, 0xb32c5af9, 0xd907246d,
-	0xf4114bc5, 0xe89e9002, 0x6f31b787, 0x91f92b63, 0x8612fcb6, 0xaccd3c79,
-	0x97d20ef3, 0xe30c8d67, 0x383637af, 0xffb0550d, 0x869d1b1b, 0x219f78f9,
-	0x23b43ab3, 0xa8506a6e, 0x8546a6fe, 0xfd799bd7, 0xd50f06dc, 0xf0f46dcf,
-	0x5bd40b7a, 0xd4290f30, 0x6f718015, 0x753aa4b6, 0xe8d01f78, 0x4c17ede5,
-	0xfc1c7ed4, 0x8c27cc01, 0xbc910b8f, 0xf1d1ed6f, 0x7c7f237b, 0x9ab58248,
-	0x3b0ecb12, 0xe8f77f11, 0xcc175014, 0x2b332d94, 0x7836cfc0, 0x7f687a43,
-	0x1032858e, 0x3617bb91, 0x7ea10b79, 0xe2b643b7, 0x7b8376fe, 0xc147f98b,
-	0x9de132a5, 0xbdde00fe, 0x3af741d8, 0x3efc455b, 0xf14cc4b8, 0x2875b066,
-	0x6496ccde, 0xb7863b0a, 0x86b02c77, 0x39031ed0, 0x7bd8e748, 0x00764c8f,
-	0x6ea3c3c8, 0xe6768bb4, 0xca9f182b, 0xb7e5aa5c, 0xaa0b85f4, 0x6646bc68,
-	0xbebd3f45, 0xbcd78f91, 0xa1d21753, 0x71b9655d, 0xf341d226, 0x3fa0a60e,
-	0x53c2ecfb, 0xee10c3b5, 0x3f2e1450, 0x79a172b4, 0x9c4753e1, 0xcebf1fb8,
-	0x79fd405a, 0x5fd9af1c, 0x0d2f5dbd, 0xb79d33f0, 0x0c7e4073, 0x61ca3796,
-	0x5e63271c, 0xc1f182b5, 0xc627d874, 0xbc8c3bf3, 0x4ca7783e, 0x0be92df7,
-	0xf475b0e5, 0x0b677f00, 0x1f23a614, 0xd17c9126, 0x9dc8d7f0, 0xc179f85a,
-	0x32efc0a7, 0x9db82bee, 0xd1673e51, 0x903f6d76, 0x57943a93, 0xfadaedd9,
-	0xe3fa8b5b, 0x443c1a02, 0xe7e6d9e3, 0x9f7a2f72, 0xc70afb03, 0x74bed115,
-	0xd7285f7c, 0x72d8bea0, 0x1b8bea80, 0x44e9c565, 0x0a79d779, 0x53b45ff7,
-	0xeb806166, 0x44cd9617, 0xa4dfaa7a, 0xf5c8f0a3, 0xc2e48bac, 0xc6adf695,
-	0x19f7a23b, 0xf2efbfbd, 0xa88e5cf5, 0x6613e0f6, 0x1edb07b2, 0x9ef0e8b6,
-	0x78adec15, 0x55dc2b8c, 0x402c1d54, 0x1dc8407b, 0x973d25c3, 0xa216cd27,
-	0x51ed8353, 0xa1fc6477, 0x13f55465, 0xd86fd405, 0x6e3c758d, 0x968efb41,
-	0xe3173f63, 0xe6d6ea4d, 0x13db5de3, 0xa63f951f, 0x729bc7cd, 0x7f2a3321,
-	0x7f2a2f2c, 0x7da6946c, 0x545c75aa, 0x51b5d8fe, 0x1a3563f9, 0x967b9678,
-	0xcaf5ffa6, 0x86f81a4d, 0xfd343bf2, 0xd6ee78e7, 0x7754dfb4, 0x66fda6bf,
-	0x7c0d4aef, 0x6b5fc36b, 0x6be6dffa, 0xb1dfb4d6, 0xf69a27f8, 0x2d49ff68,
-	0xf9701577, 0x3feed9be, 0xd06c0149, 0x3df791f7, 0x28de996a, 0x7b9e46f7,
-	0xa7b70252, 0xb9fdfba2, 0x8bfbd380, 0x058f9f12, 0x1c789aed, 0xf135d8f3,
-	0x854570ba, 0x71c61bb9, 0x21df951a, 0x0ee262dd, 0x6bb6bfbf, 0x3ff6d9ee,
-	0xbc60fd0e, 0x1b5cc4a6, 0xff8c3bea, 0x37b940fa, 0x5f747487, 0x4abf5b61,
-	0x69b83d22, 0x5cab8f15, 0xaf3c5230, 0x8eac1d7f, 0xdc46fbc6, 0xeceba96b,
-	0x2da47110, 0x85424718, 0xfd4199e4, 0x7ef1c656, 0xe3574d3f, 0x371a3e8e,
-	0xa418dca3, 0x7e85bcfc, 0xcdc0e309, 0x7bc5663e, 0x02cb7493, 0x069bff9a,
-	0x265d9925, 0xb016da2e, 0x67cc0f33, 0x635c155f, 0x527dbd84, 0xb3d4f7d0,
-	0xcfddbcf0, 0x5bd31e28, 0x1853edf0, 0xe143e98f, 0x219d7408, 0xf73f3c73,
-	0x5fcfeec0, 0xe6daf981, 0x5ca197a5, 0x5acf6e8d, 0x43ebf7be, 0x6e7f6997,
-	0xde1f5bd9, 0x1fe7b97b, 0x25ba75d8, 0x38c87da2, 0xf3264369, 0xe001d044,
-	0x80fde62c, 0xf9f5c85c, 0xc5230af2, 0xfc01aeb1, 0xbfbe0215, 0x89cff8aa,
-	0x3fb9e03b, 0x44eefb39, 0x65ea1d3b, 0x847e87ac, 0x9fe53fd7, 0x9c92fca3,
-	0xa3df6051, 0x9b171dfd, 0x7215c76e, 0x8d6d95ba, 0x6a0718bd, 0xd13a344a,
-	0xbb32cfcf, 0x07193eca, 0x7ee06d74, 0xfeffb475, 0xddbfbf5c, 0x9177fe49,
-	0x944b2718, 0x9e7f2b7a, 0x4e4c8399, 0x3114f717, 0x6a4fa1f0, 0x655e5097,
-	0x8d3f942e, 0x89fd8be4, 0xa4238a46, 0xc1dc445b, 0x171358b2, 0xfb06e350,
-	0x9095ef13, 0x4bc3d3ee, 0xf18f9e28, 0x5c6f1c02, 0x11d693a1, 0x32c82f1d,
-	0x86bad3e7, 0xd7f59f1e, 0xe6314827, 0x1a875a89, 0x279e889f, 0xea04f684,
-	0x64f16599, 0x7bef444f, 0x79556149, 0xd7e470e1, 0x51d393de, 0x90329f7e,
-	0x5e8a1c3e, 0x143ccf30, 0x42b4fe31, 0xfe63dfee, 0xe63d6478, 0xe3228787,
-	0xef41ccd9, 0x2a0c102b, 0x7bb18466, 0x77ce1143, 0xc277cf94, 0x1ec9d8a0,
-	0xfe87b504, 0xd7217d5f, 0x9730d303, 0x19f2386d, 0x81dbcbf7, 0x12dcb1af,
-	0xd67d92b0, 0xf087fc01, 0x9527010b, 0xca9b80a1, 0xda85016d, 0x09ca07b7,
-	0x21e0257e, 0x8ea04778, 0x5e02d7ca, 0x6819dfaa, 0x01e7f820, 0x819d951f,
-	0x46ff54c5, 0x9bf04fc0, 0xbf04d581, 0x0160f685, 0x53d7a9c6, 0x4ad03bb9,
-	0xed037bed, 0x081dbf04, 0xec0e1951, 0x8103faa0, 0x060f824e, 0x287c1176,
-	0x70f82610, 0x479530e0, 0x7f545d03, 0xc101f03c, 0xc93ee337, 0x15df58ae,
-	0x4f8578c0, 0xf77da276, 0x15a16fac, 0x7cfb6bed, 0x79c5159d, 0x04b74fbb,
-	0x8d1d1ce3, 0xef131efc, 0x040e3123, 0xed086876, 0x67fcfb39, 0xf6a54c8e,
-	0x19bed4b9, 0xc4a70487, 0xafdb82b6, 0xfa91996c, 0x0a2130d9, 0xda58eb9e,
-	0xdc03d218, 0xed4f185a, 0xf93215b6, 0xfce9cf6d, 0xeedc8529, 0x336df922,
-	0xa541fb70, 0x5c853583, 0xe429aede, 0x161f5cf7, 0xca4a73f1, 0x9e47ad8b,
-	0xa6ed542d, 0x7f7187f5, 0x3fb079f6, 0x55bcef5c, 0xb597bc66, 0x72b3a3dd,
-	0xcbdf937b, 0xb8bf603a, 0xc50f587e, 0x6e7cd985, 0xade6db2f, 0xe63975a5,
-	0xd6ed48df, 0xd05347a2, 0xaff76f4f, 0x6deb439a, 0xd9ae2994, 0x82903bee,
-	0x89cf6cf7, 0xf0db277c, 0x64a86f78, 0x8d9e7af0, 0xe3077f5a, 0xec03837e,
-	0xec63d7a5, 0x496ed303, 0xc71130cf, 0x331cd47b, 0xe829d78e, 0xfe7121d7,
-	0xc4ca0f63, 0xb0302f7f, 0x2db9e0fb, 0x5105df60, 0xb6bf540e, 0xbd55e302,
-	0x289dbe85, 0x8e779f37, 0x9c03203f, 0xcfc7c75a, 0x82bf255d, 0xf79c3476,
-	0xbf502de7, 0x5e4dbee1, 0x4db0ea5c, 0x6ec835ce, 0xcadff3ed, 0x4397f8c0,
-	0x5a8f9ed2, 0xf9f62dbe, 0xb78f8782, 0xf14c9565, 0x378adb64, 0xbcf9075d,
-	0x33ff91bb, 0xc38a3e8b, 0x5cde4c30, 0x86450ea7, 0x35fc9e63, 0xff7717ce,
-	0xcd423aa6, 0xdf3a8f26, 0x6aef9c58, 0xb1e234f1, 0xc62f9b5a, 0x279286ba,
-	0xbf239257, 0x81ef1429, 0x942cb164, 0xb819cf23, 0xe49e0adc, 0x052524f6,
-	0x8f3c1a4d, 0xe6a02f9a, 0x0be7440f, 0x29e05efc, 0xde62c4cb, 0x4fd67ee7,
-	0xd73a41bf, 0xbd1b3c17, 0x92e36794, 0x35874931, 0x7a12d819, 0xde2aa7ef,
-	0x3d0626ba, 0x2853e5a8, 0x1fc100c7, 0x2e713216, 0x38f8ea9b, 0x64ce3e3a,
-	0x2ae082b6, 0x4318358b, 0x33e5ab5e, 0x2b7f9c62, 0x759b74e4, 0x870dcedf,
-	0x1a8f7cf0, 0x8b6a3728, 0xfd01b42e, 0x3d09e084, 0x7d4cd7c9, 0x2257d6e7,
-	0x4117f5d6, 0xa18c5b9f, 0x6e87bc62, 0x504af187, 0x94bf22ae, 0xd582fc50,
-	0x7d5de047, 0x1d843fee, 0x75c5fcf0, 0x3cff7429, 0xda1c6d6f, 0x4ccced47,
-	0xf83360f4, 0xd046c653, 0x32e90d83, 0x8b387d06, 0xfc0e348c, 0xe226aa59,
-	0xcbd70cbd, 0x60972835, 0x2616fbdd, 0x99ac3e91, 0x31acdeff, 0xc9f65700,
-	0x65b2cf94, 0x9cd3cf29, 0xca3aeff4, 0x31fb7913, 0xf75df7ee, 0x9fbd2d50,
-	0x67ca2194, 0xb283cfd1, 0xc2533d72, 0x0b952e70, 0x99bf142d, 0x133e417c,
-	0x4851a7e9, 0x17fa3c7a, 0x6d735e3c, 0x0f79acaf, 0xb68f526d, 0x8f54603f,
-	0xb7464676, 0xef3edeb6, 0x6153d3cd, 0xfca5f69e, 0xbf8bf6e1, 0x7070823b,
-	0x24e28e95, 0x5064fbea, 0x4df14193, 0xf9819839, 0x8ccc1b9b, 0xbe6db9e4,
-	0x60f28ad9, 0xc93c7a7f, 0x2cdbf6bf, 0xcbae8764, 0x3b438a6f, 0x556f34d9,
-	0x8c23960a, 0x3b18adc1, 0x2dd5e6bd, 0x9127d937, 0x55f355bc, 0xec1cac82,
-	0xdc8dbb81, 0xf73e09c8, 0xe51954f4, 0x9967cf25, 0xa796eaf4, 0xadd8f983,
-	0xd4e1d695, 0xf9be4cb1, 0xba76f87e, 0xbeb896b7, 0x1da11a70, 0x7ca379e0,
-	0x7b4115d7, 0x3f705a46, 0x9cb66d36, 0x6b7ca469, 0xf982324c, 0xccfd0b0d,
-	0x658df588, 0x573e48e6, 0xf2fbe4f9, 0x87c63c7f, 0x0e595f87, 0x2bdc695c,
-	0x3e417bf1, 0xfca19be7, 0xf210d369, 0x1f8ff554, 0x8bfce029, 0xf57a4b6c,
-	0x7da6318c, 0xce22abf5, 0x9e46e567, 0x61bb32a7, 0xc3dd1d5a, 0xcc65bb04,
-	0xdc517be7, 0x27a7b50b, 0x7b713dd2, 0xbde30b2e, 0x8e817041, 0xf8d27bc7,
-	0xb98ded7f, 0x936a1f14, 0x3cc129fc, 0xb9f097cc, 0x01dafcf0, 0x7f308947,
-	0xeb970e5b, 0xe2b7e42c, 0xb38c357d, 0xe0fd7238, 0x74b505ef, 0xa61ec8cc,
-	0x789e85f8, 0x888c69cf, 0x1c5c63b7, 0xcfd117e3, 0xc2d5ee4d, 0xe1682e53,
-	0xc0d0662a, 0x3c2d6635, 0x3785aad5, 0x7d3b7115, 0x3f5b5dba, 0x1d85a9c3,
-	0x74e307d9, 0xc2dfcf3c, 0xf049e222, 0x447e5ef7, 0x68dd681c, 0x765f3efe,
-	0xcb8a52f7, 0x78f0e5b6, 0x3695638f, 0x42c591ce, 0x732fe212, 0xd63c5469,
-	0x863f66bd, 0xa30bed97, 0x5efc41e3, 0xa9a1f002, 0x7c8a3147, 0x9e68eaf0,
-	0xd23dde87, 0xce08bdb7, 0x5f0c60b3, 0x4d1dabc7, 0xdac53f74, 0x5caf88d3,
-	0xb0695f22, 0xe88a7cbe, 0xf90f1d40, 0x7fb11822, 0xf84887e4, 0x37be51a1,
-	0x8be41e70, 0x2cfea460, 0xfbd036e9, 0xa1be62ab, 0xcfe543f8, 0xa28f7172,
-	0x89f4dde6, 0x9bbcd4b1, 0x705f2255, 0x4ebe5457, 0x1936a39f, 0xaebee7fd,
-	0xf8b1f195, 0x682ef910, 0xe5887ce2, 0x837f9106, 0xe22c187c, 0xa6f5887c,
-	0x637856ef, 0x050b8bd9, 0x63bfdc5d, 0x224f86c9, 0x73acb7f6, 0xbe5e0685,
-	0x910de1eb, 0xe3f751f9, 0xbf08303f, 0xed7e519e, 0x2f9db152, 0x2bcbff4f,
-	0x48cd0ccd, 0xcf2807df, 0x319c1596, 0x5ea77bf2, 0x42eb9e23, 0xcc99ff61,
-	0x2fd1f2b3, 0xf2e211db, 0x37889d6c, 0x33155b34, 0x3b9981c6, 0x50c71355,
-	0x4b4d11e3, 0xd854b65c, 0x7c7f7247, 0x7ca56bc1, 0x14f9e1dc, 0xf1aa48df,
-	0x32c6cedc, 0x9c6453d6, 0xdd62066b, 0xc056c18e, 0xd957f9e9, 0xc0c74133,
-	0xf8174dbe, 0xb0fdc97b, 0x8f2467ec, 0xea68e42e, 0xa39c44db, 0x0b2dbf9f,
-	0x8b3e70aa, 0xb0fb49db, 0x1e1aff31, 0xd1c6d417, 0xe73de24c, 0x343be3c1,
-	0x7e226df5, 0xb5f1e572, 0x85d33971, 0x2fc621bc, 0x1adf1a8c, 0x7181fc73,
-	0xabbdf1b5, 0x714f37b8, 0x2e3a184f, 0xe9cdd236, 0xdfdd9d69, 0x83317185,
-	0x06667fe0, 0xf288993a, 0xe3e9ff80, 0xc1ae7e79, 0x198f8da1, 0xfa0baf30,
-	0x98b8973f, 0x3efa8ae4, 0x0599fdb5, 0x27cbca12, 0xa4e8fdf0, 0x5a24f2c1,
-	0xde44d88e, 0x811cb47c, 0xd37034f9, 0x36cf5cc3, 0xe50f8a4b, 0xfe7ef473,
-	0x7587f17f, 0xc8bbe389, 0x778eceae, 0x0f632e9a, 0x638205b7, 0xf175b9f1,
-	0x0778c5fe, 0x918ef77e, 0xe3944f69, 0xf88ceb7b, 0x298ec56c, 0xb60f3173,
-	0x13ebf04d, 0xa7a23a69, 0xb7d3dbf4, 0x29e823ea, 0xa173e8dd, 0x13ae9c3d,
-	0x87f85ff9, 0xd227b471, 0x318c6db7, 0xa9d76abf, 0xd601adb0, 0x6d8e7111,
-	0x9fee9ec2, 0xadcc8eef, 0xd27188fa, 0x34b1be4d, 0xa3fe7f5f, 0x87e5af98,
-	0xc459b7cd, 0x6cf9d4c3, 0x67f76a77, 0x7f69fa33, 0xd487a136, 0xfee336f9,
-	0x15d5f062, 0x75fe13e7, 0x69777cff, 0xf93367f7, 0xf5367f69, 0x7cea1b3b,
-	0x3e6c3f2d, 0x76cfe0bb, 0x3d97def1, 0x64377f9e, 0x9a23f7a8, 0xbdccf3fb,
-	0xed2f9466, 0xe850bc6a, 0xfa5173bb, 0x3be849ae, 0x6973f9f5, 0x3dff14b9,
-	0x7326f877, 0xfa873d2c, 0x933b098d, 0x09933b09, 0xd9e1133b, 0x0d57a735,
-	0xbbfc7a07, 0x95cf371d, 0xbecfaf41, 0x1cf8f4ff, 0xf1d9df80, 0xe832b98b,
-	0x9eafd9a9, 0x1e0b337e, 0xfbdbfe29, 0xe9f4fc38, 0x5bb4073e, 0xadcccf82,
-	0x18693805, 0xbaeacfd7, 0xb97779d5, 0x7cb95db9, 0x6f8f1e75, 0x3d459c82,
-	0x67e39cd6, 0xcafc7f18, 0x1f349bd1, 0xeecf2ffa, 0x03105f4d, 0x7cb96a2f,
-	0x1e7f2175, 0x9889c0ad, 0xaf48c6cf, 0xc7bea8dd, 0x8f7da752, 0x23692925,
-	0x2c7187d9, 0x96394564, 0xfbd0f660, 0x7316d797, 0x533370bd, 0xe15fb81a,
-	0x1c79102c, 0x4dcbdef4, 0x6b5c62e5, 0xfdb12fe5, 0x09e79d66, 0x79ff77f4,
-	0x68e1bcd2, 0x7379ab3e, 0x3bde06a3, 0xde7dfedd, 0xb1fd9e4f, 0x64e56dc4,
-	0x36998f1e, 0x7bdfc9ca, 0xa22b888b, 0x3e143c5d, 0xff73753f, 0x1e9f007e,
-	0x0f54cf8e, 0x37b5a7c7, 0xff9c0d69, 0xf4de94f2, 0xc34f89c7, 0x0835f131,
-	0xfbf851af, 0x7ea99b93, 0x88ed1ea0, 0xc55be12b, 0xd85f9aab, 0xc80b392c,
-	0x9a19675e, 0x14c660fc, 0x1e7bac67, 0x3d48cfa4, 0x197bb46b, 0x3486a3da,
-	0xeff98dc5, 0xc7d17fcd, 0x1573dbcc, 0x525ef88b, 0x367de53c, 0x1fc91927,
-	0x93349fdf, 0xb659fc61, 0xd4bc234c, 0x3e51d526, 0xeb187ea6, 0x3a357f44,
-	0x7c9f5d0f, 0xe909e53b, 0x4061e86d, 0xecc79fd9, 0xe95f2331, 0x5d92563f,
-	0x99570048, 0x295f2e87, 0x26753d0f, 0x324f43cf, 0xd85e313a, 0x998c689e,
-	0x9badfe87, 0x71fb5dfb, 0x1fb8697f, 0x886eff23, 0xe56c97d8, 0x9f58eef7,
-	0xab46f500, 0x5dfc518f, 0x615bffec, 0x4dfda907, 0xf9433f56, 0x4e2a37a0,
-	0xa9f45fb4, 0x77e07f5c, 0xe231dc5b, 0x0dbb5f28, 0xa3fdfcf4, 0x99cf5cac,
-	0xfb3eddb9, 0x27dfb137, 0x44962b28, 0xdd3624bc, 0x3737450d, 0x9dde78ea,
-	0x2d7397ca, 0x9c07ca46, 0xf7d3b16b, 0x2102e66c, 0xf446a4f6, 0xfe56eebf,
-	0xd8acb53e, 0x7b7e9e91, 0xfe5f94ed, 0x00b5e196, 0x66a7db97, 0xc2bde818,
-	0x28f31253, 0x5df383a9, 0xa994debd, 0xea1bccb8, 0x7645af4f, 0xc8c3182c,
-	0xc1757a4e, 0x4e95ad43, 0x8aea8ff2, 0x737d9e91, 0x770fa2a6, 0x77d8c363,
-	0x04f2ffb1, 0xfbd5cf2e, 0xfc09e5a5, 0x646bde7d, 0xffec6cdf, 0x4917c555,
-	0x725f48d5, 0x2bae0e6f, 0x33dd3fa2, 0x5b9ff445, 0xcffa813c, 0xf5ddafe6,
-	0xce3977d2, 0xc8f99da5, 0xec7ce8c7, 0xf429ecb1, 0xbde458b7, 0xe81f9086,
-	0xa3d64577, 0xce22c5bf, 0x6e505a53, 0x4f218eeb, 0x3ec332d4, 0xa042e46e,
-	0xb18c8cd7, 0xcff5aa54, 0xa175f47a, 0x90fce718, 0xec1fe738, 0x6ac3b4f7,
-	0x3df80e27, 0x843cefe0, 0xe172f8f8, 0xb0f1f4a9, 0xbf6a07a5, 0x6ec7bf26,
-	0x16ceffec, 0xb00371f9, 0x2db3bef6, 0xdf8c5bd0, 0x87886019, 0x8bf91189,
-	0x25f6bf62, 0xefd0526b, 0x20f4b381, 0xbc0476dd, 0x030d6b23, 0xe42cbfcf,
-	0xd2160b08, 0x2eb106f3, 0x0ceb5a47, 0x2c38bb8c, 0x6073ca3a, 0x6791aacc,
-	0xa6536a73, 0xbb0ba1a6, 0x2716299c, 0xe45df7fa, 0xfbe06417, 0x7c9f180d,
-	0xf78636e7, 0x9d69595f, 0xfd75da12, 0xc6f788f3, 0xe17b8957, 0xed2d5f3e,
-	0xefd6c327, 0x5ff23197, 0x507382d3, 0xc33df56e, 0x92f19457, 0xc691ddb6,
-	0x5dee1ff3, 0x02721f18, 0xed2d67bd, 0xb04f4fc2, 0x30f8700c, 0xa9719fa6,
-	0x7282d5d9, 0x140957e6, 0xe7b7d677, 0xfbc820b3, 0x1bfbecb0, 0xf9c877c2,
-	0x6c4f2e90, 0xb65b9e16, 0xb9ec9e28, 0x0675a976, 0xe8f731f9, 0xd178ac58,
-	0xa7ee62ce, 0x2b628ffc, 0x4fb5cfbf, 0x1f63f4e4, 0xb8e1723f, 0x77ffe7ab,
-	0x49f99e84, 0x7fde93b2, 0x4da3ed52, 0x8e47f843, 0x5f213a91, 0xf8115e84,
-	0x199f3333, 0x792f45f9, 0xc774b079, 0x96bdaf6b, 0x5b53e8ce, 0x841b4748,
-	0x138ea3fd, 0xc6a21f9f, 0xf243c578, 0xb87ab252, 0xedfab0be, 0x75af3841,
-	0xce63e9df, 0xfba085ff, 0xd90fd935, 0xd3ad7fb1, 0xfa32c6e7, 0x9c96983d,
-	0x3e78dd7b, 0xe9fb332d, 0x96baec95, 0x61dfce33, 0x28f0563e, 0x9fd837cf,
-	0xefc3685d, 0x1b0e5941, 0xe265d364, 0x27d046f1, 0x19d8cbce, 0xdeaf9146,
-	0x99e78072, 0xbaca58b6, 0xc5a1af30, 0x6a465692, 0x56f3c2d8, 0xcb16fed5,
-	0x1607d221, 0x5adfdf85, 0xb8487f50, 0x0947c04c, 0xe110ebae, 0x5077ed43,
-	0x128b5dc8, 0x5a5ef866, 0xfd4ad29c, 0x83d7b2cc, 0x34e6ca79, 0x6644f746,
-	0xe217f02b, 0xccc75f35, 0xbec9f431, 0x5a4fae62, 0xaabaca4a, 0x7e327d69,
-	0xd8b58eb9, 0xe7a4eccb, 0x7cf0ef11, 0xcf968673, 0x577813bf, 0xf91669c7,
-	0x4eae77b4, 0xc38ed609, 0x1bf79338, 0xcb16e7a4, 0xf5107302, 0xcbf8e25a,
-	0x391a678e, 0xd7fb78d4, 0x43bef18a, 0x2c4fae79, 0x0678e2b3, 0x8d15f7c6,
-	0x9c62e1f7, 0x7bfbd5ff, 0x47bd2cc0, 0x581d304d, 0x7deb1ed8, 0x13f3feac,
-	0xcfd1f2f7, 0xbc7960fd, 0x02871b56, 0x091eec79, 0x72565afb, 0xd53550e6,
-	0x0bd3f8f0, 0xfd519fc2, 0xf6317492, 0xbf7f120b, 0x2bc5283f, 0xe10c5df4,
-	0x69c7a4a7, 0x3ef030f1, 0x6f873f2d, 0xde1e781a, 0x7c4c6937, 0xd7cb4e87,
-	0x38ff1cdf, 0x059f9345, 0x7131ec7c, 0xde23c63f, 0x3888f5a7, 0x6f18c21d,
-	0x049d17a0, 0x89c7f7ff, 0xc33f9c1b, 0x4099acef, 0x5c60eb8e, 0xfa27e1c9,
-	0x5dba3936, 0xe239efc8, 0x78d10ffb, 0x2e48c9fe, 0x7a47a5af, 0x51af785c,
-	0x119bd69b, 0x7c5fdf8b, 0xee0642f8, 0xfd19c5e7, 0xdf743b79, 0xe769e2f4,
-	0xcbc402e6, 0x6ffbed11, 0x474df8ea, 0x22f8a7ce, 0xe5c0a5fd, 0x3a4b2fdf,
-	0xd92571b3, 0xddb80b8d, 0x7dfa7ff8, 0x73e617b3, 0xa497753b, 0x084fcf95,
-	0xfc141cb9, 0xd320bb60, 0x2aee43f7, 0x3a40adf2, 0x0bac936a, 0x3ce72e50,
-	0x9af2f3cc, 0xb3d55b1e, 0xb47f0628, 0xd5fdf28c, 0xbabf08c8, 0xe491bd7c,
-	0x3725b35e, 0x28f772f9, 0x9fbb9f43, 0xde7a94e4, 0x79988f55, 0xdb8f8abe,
-	0x7bbee9d1, 0x3a260f29, 0x7ea8653f, 0x449d23d5, 0x137f6a0f, 0xc5f28f8e,
-	0x15c52372, 0x818fa1ce, 0xb72b3b71, 0x59d7a233, 0xc098c889, 0x7d0663f1,
-	0x49607499, 0x106b8e1c, 0x6a0bdcfe, 0xcca1a45c, 0xde7889ec, 0xb9995b70,
-	0x9a4e823a, 0x8e0fcf19, 0x2337ff1e, 0xac22fb55, 0xa80c63b1, 0x94c6317f,
-	0x97ed9f26, 0xf278643b, 0x0395b4fc, 0x0ee3cc7c, 0xc5a3e743, 0x232dbe71,
-	0xf30dac7b, 0x5e0ec0d2, 0x0460b0d3, 0xf64db7e2, 0x3c0368bd, 0xa2687ef4,
-	0x0bdfea3c, 0x7c16ed3e, 0x05f9d43a, 0xd23001d9, 0x1d9c7b18, 0x80e297c4,
-	0x2327c64e, 0xebe7345f, 0xf63142ea, 0xf3ec5c79, 0x7878f632, 0xc7b3f7e4,
-	0x1afe890f, 0x6ded1c7b, 0x46fdd44f, 0xb6768c24, 0x7e3d8627, 0x05f11242,
-	0xc2742791, 0x0dd5dce0, 0x39313978, 0x5697be99, 0x5defc090, 0x527fa04e,
-	0xabc87e06, 0x7ed1f3a7, 0x7ff52d99, 0x43f84917, 0x47f0608c, 0x62f905fe,
-	0xb6bff30e, 0xe23e2248, 0x1b7835f7, 0x73e57e9f, 0xd19236de, 0xf9c036ba,
-	0xdb46fde1, 0x6233f9c5, 0x8ea467dd, 0x5037fd52, 0x13ef1165, 0x889d3c33,
-	0xf741acfb, 0x72f75174, 0x9fd36d78, 0xdc1fac77, 0xed7286ff, 0x8b86d9bd,
-	0x5a622e3c, 0x4b8f42c2, 0x6daa9798, 0x10cea9bf, 0xb9a82f7d, 0x6bd9bb4f,
-	0x7d0f5e88, 0xd621d417, 0x1f71dd9b, 0xcd4fbfdd, 0xa644f9e6, 0x04e28c65,
-	0xa66df7d1, 0x3d1e5db1, 0x8c0dcfda, 0x38e8fdec, 0x52a9e639, 0xb181b0fc,
-	0x79e5122d, 0x7973df6b, 0xfe73fea6, 0x3ad6947d, 0x760ec79c, 0xd1d3da10,
-	0xf7a849ef, 0x51f7ea5a, 0xdfab3c55, 0x4dbf4a8f, 0xc163eb47, 0xc6aed429,
-	0xb87bf1fd, 0xf911e955, 0x7f582be4, 0x2b7f7a7f, 0x9bdf7b18, 0xcf29eadb,
-	0x7fbc7320, 0xb29a186c, 0xc8784614, 0x6fc8c85a, 0xf2683c00, 0xdbd94c09,
-	0x16e79f69, 0x224c3633, 0x33da683c, 0xfdd3d340, 0x7e6d42c0, 0x0353ec01,
-	0x57abfb47, 0xd94d53f2, 0xf39597f9, 0x9a638a57, 0x94e4bdc4, 0x97fbe251,
-	0xed14aca5, 0x9edbf4a2, 0x0738f3a1, 0x5f7181e7, 0xdd629c74, 0xf1826e3b,
-	0x77fc8fd1, 0xe2cd2fc1, 0xaefd5b6e, 0xf4c8f30f, 0xce549b1e, 0xf30d2cd7,
-	0x12e97bf2, 0x8a6e7c46, 0x8fcc6667, 0x1e4c2a97, 0x04c9bbc4, 0x32596c30,
-	0xd4067332, 0x7b3c45eb, 0x8464c48d, 0xf3315599, 0x5dfaa3f8, 0x577d10a1,
-	0xd479a868, 0x20b22bef, 0x679d4e7f, 0x2ef577d0, 0x7bf93cf3, 0x6be7e8d6,
-	0xcea99e29, 0x87fe143f, 0xbfde8efa, 0x8137bcd5, 0x441d53c7, 0xf4038daf,
-	0x417cf04a, 0xca3cf88f, 0x66d5bb85, 0xfa29577b, 0x4c1e670f, 0x114a3650,
-	0xd2ce08fb, 0x7e03eff3, 0xd7faf1bf, 0xbc927761, 0x1897dfef, 0x8beefbef,
-	0xdae422fe, 0x09597c3a, 0x191a5ef3, 0xfba431e5, 0x29973faa, 0xa0f600ff,
-	0xdf111391, 0xd6f18049, 0x1fefce3d, 0x3e77e336, 0xc0e7fef0, 0x13edfe40,
-	0xd1f76c16, 0xbcd43677, 0x5da3cc5c, 0x3ef0325b, 0x837df472, 0x89c611bd,
-	0x99b26f98, 0x9f401305, 0x0531f4a4, 0xb9ecf3bf, 0x03a65468, 0xa07d6c7e,
-	0x93bf0150, 0xa5ee8999, 0x337ead2a, 0x0ae10eff, 0xef676916, 0xefa56e97,
-	0x64bf86bd, 0x3e14bf94, 0xc3ee88cf, 0x70c4c39f, 0xddf8ff2e, 0xcbe47afb,
-	0x7a5d7da9, 0xfb93f3d4, 0xf67fa4fc, 0xed3d4fd9, 0x9962e7e2, 0x751f9111,
-	0xcf545b1d, 0x979f8ae9, 0x5f27ea2c, 0xfdf86a30, 0x46a35eda, 0x5b17c81e,
-	0x65fd46be, 0x67aa89ea, 0xe3e33fd3, 0x2dde28f9, 0x53edb5db, 0xdbd03e44,
-	0xc35fdf2a, 0xbc73a1ae, 0xcf331698, 0xd5dce06e, 0x71e26e73, 0x79c7c674,
-	0x9ff7946e, 0xff404d46, 0xe87147c0, 0xd82fc464, 0xdd952917, 0x58798ecc,
-	0x8e994ce5, 0xf3b2bd72, 0xe487a41d, 0x3c0f3cb3, 0x5ffdfc7a, 0x7e8595be,
-	0x9dc99ec3, 0xed2f6859, 0x3d15f2f9, 0xd3d5578e, 0x193eb0cb, 0x58a41e4a,
-	0x10aa784c, 0xcf5033b4, 0xf59144e3, 0xe74a9eb4, 0xcfe4e565, 0x871a4e50,
-	0xd933df6e, 0x87e4c2c2, 0x3da02675, 0xfe7c7cc7, 0x57cab364, 0x70972fec,
-	0x9f81845e, 0x52ea54f6, 0x7b9f616a, 0x6c15919e, 0x46f3d3dc, 0xe7bfce02,
-	0x7acd39ec, 0xf322fe98, 0x5afbac45, 0x2b53ee71, 0x7efec97b, 0xf92bac4a,
-	0xa1c52f6c, 0x30de9553, 0xc3d4dbea, 0x37fefa7a, 0xc8bcf0b3, 0x38a14c61,
-	0xfc5eba9a, 0xd73e2a6e, 0x88de7282, 0x5632b3fb, 0x287eec28, 0x55832a33,
-	0xcc9a8f98, 0x6b484a76, 0x417d2b53, 0xa5e4e7a4, 0xad939e9c, 0xbf18c3fe,
-	0xa3af5e4f, 0x59f24538, 0xcbf406df, 0x0565cb92, 0xf84ae4c9, 0xb7f310ec,
-	0xf9d4f98a, 0xa88cf5d5, 0x7ee84bf4, 0x62e3b324, 0x132aaefe, 0xcc5abf8e,
-	0x59eb14ef, 0x2c3be8c5, 0x55ad67c9, 0x83272fe8, 0x33df419d, 0x9a79e2b8,
-	0xb745f335, 0x99d94f27, 0xb1e0e745, 0xe30ad91e, 0x365b64a5, 0xceb94154,
-	0x32ff23a1, 0x3c5187a9, 0x9d27a93d, 0x4f527de4, 0x8a2728a1, 0x0f4269fa,
-	0xd4933970, 0xaf2d50f3, 0xa4d2a16f, 0x3f8717ca, 0xda98fb8c, 0x717cb8cb,
-	0x98be4978, 0x517cb8d2, 0x9556b8e9, 0x325acc2b, 0x0ff7ea1f, 0x06b5acff,
-	0x73f77b9e, 0xbbe5fefe, 0xbcbe5cd9, 0xfbf725fb, 0xd3bf694d, 0x42aa5ca3,
-	0x4dfa05c3, 0x33edc0bb, 0xbaab1f95, 0x48113625, 0xe7839a63, 0xc8ba1f87,
-	0xd9843b9f, 0x63af00d5, 0x9529c912, 0xdd056b6e, 0x83eab3ae, 0x81fed849,
-	0x3477de89, 0x98e5ce39, 0x83fe1ec1, 0x7c41f7ae, 0x33f7f8ef, 0x415def7a,
-	0x437e82f5, 0x9a2e494b, 0xe4396c84, 0x3e416058, 0xae487984, 0xe918721e,
-	0x3a080ebc, 0xe9af673e, 0x5b3fc308, 0x69fcdfcc, 0xc1ffd43e, 0x9340eb9e,
-	0x1e973d4c, 0x885f2f41, 0xe82b3bf3, 0x7bdd29a6, 0xfc04c953, 0xcd1e62fe,
-	0x0dfece7b, 0xdcb27fbd, 0xc69f1ff6, 0x3aa72efa, 0x4f7cfa8e, 0xcf19a568,
-	0x1f9bd0f5, 0xabb4409f, 0x7b235fe3, 0x7ee3e4ef, 0xd0f89a33, 0x78cf3b12,
-	0xadf3fc90, 0x8b7f9688, 0xc80f864a, 0x91667abf, 0xe7121e79, 0x1e4259eb,
-	0xddb8554d, 0xe7e56f5e, 0x5fb25f55, 0x8b8afea6, 0xd2af55f6, 0x5ae4f28d,
-	0xf29b7fe4, 0x7d4bd124, 0xbd97a73e, 0x0a0f9e82, 0x63ecce7c, 0xed97e89d,
-	0x196e982f, 0xe23ef80b, 0x1cff13d2, 0x52c6bb19, 0x291dcf06, 0x024bf095,
-	0xd6c97a6c, 0xcf00a9b5, 0xa7a22452, 0x1dad92fa, 0x967fd04d, 0x03a94135,
-	0xb3f9e8f8, 0x0eaf3416, 0x9784bc05, 0xe3f872e9, 0x1b9e1754, 0xcaccd3c7,
-	0x4ffe8cb0, 0x8cbf63bd, 0xc46df6fa, 0x2ee311ab, 0x7567c11e, 0x6a571f04,
-	0x238fb82c, 0x2f2126a5, 0x5e51e33d, 0xd537cace, 0x7c75a18f, 0x1a4c6c7d,
-	0x506f77be, 0xa73c95f8, 0x7e82c9ff, 0x6b27ccea, 0xccdfa053, 0xd7196692,
-	0x912cd47b, 0xd7da3cfc, 0xc793f944, 0xd2ac393b, 0x74073d2d, 0x5b6fbc79,
-	0x6fb61273, 0xd53e4897, 0xe21d2f2b, 0xa7d38fea, 0x0b0f7e3a, 0x3077e1b6,
-	0xb7af29cf, 0xb1f53e60, 0xcccf05be, 0x7f1c3c01, 0xb8c43f53, 0xc0ad1f4d,
-	0x244cdf71, 0x356d9e3a, 0x8cb1f469, 0x5e84694e, 0xd36f1ead, 0x0d4af5c0,
-	0x29cfd3c5, 0x7806e592, 0xad5df3de, 0xd191397b, 0xbd77da52, 0xe14c7be8,
-	0xa1cc797c, 0xd63cbe23, 0x8a9cb8f7, 0xfb4659f0, 0xde769991, 0xb21a92fa,
-	0x5b29ceaf, 0x826744f5, 0x54f1d50f, 0x4f8a3e3a, 0x9ced1e23, 0x6df68fff,
-	0x1dbd20b3, 0xe323bf75, 0x89675d39, 0xa1d0571a, 0x5df0dfaa, 0xda9fa471,
-	0x7ef3fb51, 0x3851eb86, 0xd7946bfe, 0xd57d238f, 0xa7a2643b, 0x9afecaa3,
-	0x27bf8614, 0xffecd262, 0x9ac91dfe, 0xda7597f1, 0x5db47034, 0xdbfdcfb5,
-	0x0ec4cba7, 0xd847a466, 0x3ec2f947, 0xe0771fd2, 0x1768aefa, 0xf7e8eb29,
-	0x45d90649, 0x8a2edcf9, 0xbe5487b6, 0xb889d66e, 0x65c78eac, 0x58dff9a3,
-	0xf1eec3fa, 0x8e492ad8, 0xc65bbfbc, 0xbe9073ba, 0x8612a3e6, 0x75d01ef1,
-	0x15fc23a7, 0x078b6deb, 0xccad7c39, 0xbfbf6976, 0x3f37bfca, 0x1e77d4be,
-	0x367495e5, 0x6561df4c, 0x07e518ab, 0x9e786be8, 0xad665e11, 0x258bd488,
-	0x8d2df1fd, 0xd84ba45d, 0xac78859b, 0xf1e46b38, 0x38e89e8f, 0x851fea97,
-	0xae2bf225, 0x93ea2e52, 0xe67bb8f9, 0x7f6778f0, 0x938f3379, 0xe5fc0915,
-	0x5d691a94, 0xdcf7808a, 0xb59efb16, 0x41fa54a4, 0x07dfa2f9, 0xef8029df,
-	0x61e690af, 0xb1553d9e, 0xca5291d7, 0x9777b5e3, 0xa14af278, 0x15f12a2c,
-	0x3d5e2296, 0x77d35f60, 0x9f643dc5, 0x33bce3a9, 0xfd16e3ca, 0xbcc96146,
-	0xee8f0edc, 0x6863ed07, 0xe3d8869c, 0x7a38fb40, 0xf6ec6e7e, 0xfc39b843,
-	0x30fb237d, 0x0c0643d2, 0x52f2a664, 0x16e5e32a, 0x8846aefa, 0x1e0de7fb,
-	0x9146f3d2, 0x103788af, 0xf4c7fc91, 0x1cbe34f5, 0x58f7419e, 0x8325d82d,
-	0x7691f9fb, 0x6a84ac94, 0x6aade322, 0xdf94a8b9, 0x1528ce73, 0x604cf3ef,
-	0xa8afc813, 0xea3cfcbc, 0xc3cd43f3, 0xc85765ec, 0x63f35e7b, 0xc3fa49d3,
-	0xa55f27e4, 0x4a0e607d, 0x1f39df91, 0x4a89bf6a, 0xc28a1c94, 0x5cf350d3,
-	0x22dc79ed, 0xd76af6e8, 0xcc7a655d, 0x2ed1f94e, 0x056b07ce, 0xd5dbf57d,
-	0xbe3f1e3f, 0xfe861f3f, 0xfefbd9ca, 0x4a7ef893, 0x37a56842, 0x145e7ec6,
-	0xe531f9fb, 0xce70d3c1, 0xfba18c1b, 0x0799ded1, 0xd20263a7, 0xf1f2c77b,
-	0x9eb005f0, 0x2dfcc537, 0x6feb9596, 0x1c5b4785, 0x1ef998ba, 0x7a78fe6f,
-	0xd93f0da2, 0xdce395ff, 0xa7206dfb, 0xd07d1e5b, 0x7581b0ac, 0x15d96b30,
-	0xe347f9ce, 0x6d5d7513, 0x625e305b, 0xf7aabd4d, 0xaf5c5a14, 0x697de024,
-	0x764de7ed, 0xb4460efc, 0x43c6a03d, 0xc6a5bd54, 0xa4bb544d, 0x1fe3c1c2,
-	0x7bfced33, 0x69f6153d, 0xb20fdfa4, 0xaff21aae, 0x226d3b30, 0x19fd0ab1,
-	0xe4fb5add, 0x4657bf3a, 0x9eda2a3b, 0x45334da8, 0x7abd07d9, 0x1715df94,
-	0xfe54fdb5, 0xc454acf8, 0x17795451, 0xcf9a4765, 0xbb40499f, 0x670bedeb,
-	0x8d142e28, 0x5c2eeb9f, 0xaebd9fde, 0x83f74f5d, 0xb7ad71d1, 0xfdd2e42f,
-	0x1baf11a0, 0xcccad4c1, 0x808cc43f, 0x6b7b4c97, 0x18ec1195, 0xf82983a3,
-	0x58fc36dd, 0x8d0dc633, 0x7c9c7817, 0xd7fb9d84, 0x2fc18b89, 0x95335185,
-	0x78c17da0, 0xef48ce7c, 0xef5d99d3, 0x09bdbd91, 0x9e2186ea, 0xa6199ec7,
-	0x5307118b, 0xc08a63cf, 0xb7e66eef, 0x4d81efe3, 0xf7f78bb1, 0x59db462e,
-	0xa22d3cfc, 0x2d62e27f, 0x3ce22d3e, 0x435b8327, 0xd3ec79df, 0xe7116f3e,
-	0xfb1a596b, 0x63a3ec1c, 0x7aa2439f, 0xc5b6130e, 0x596c39e1, 0x758a4dbc,
-	0x2f8b990e, 0x845b0e7f, 0xefd2a95f, 0xb204acb4, 0xe8a6f7af, 0x7b41fbe8,
-	0xcb59c313, 0xb2fdfe31, 0xaccfde99, 0xb4367110, 0x6b9f10a4, 0x84bf97b7,
-	0xa371db71, 0x7b8e74f5, 0xbcffd125, 0x60feff8e, 0x1fea78cf, 0xf883b327,
-	0xfb0780bb, 0x1bbbe9aa, 0xd3bbfcd1, 0x33dd007a, 0x3db9ceb6, 0x839c016b,
-	0x9980fb25, 0xcf839bfb, 0x4a3fef07, 0x7b4bbe05, 0xa654b9f8, 0xbda3d49d,
-	0xec66f25e, 0x8fe351f3, 0x3a9da47b, 0xaa362b20, 0x98fc8baf, 0xeca33b91,
-	0x642db3e9, 0x47c65b67, 0x39c0f7d5, 0x9f8ebdd1, 0xa1d916ec, 0x87ebaf3d,
-	0x114aa738, 0x7d7f3087, 0xfb65e28a, 0x7e714efa, 0x25c6d1e9, 0xfe5df727,
-	0xe7135e9c, 0xa1c453b4, 0x00e22e7e, 0x7e7fc29d, 0xf2a4e023, 0xea9b80cd,
-	0x04280adf, 0x0b940aef, 0x77cfc161, 0x47cb3e56, 0x84aaaf17, 0xcf47edfb,
-	0x7f7dbf73, 0xbe83a862, 0x42de74ef, 0xbda417df, 0xdbbf144d, 0x2c727c07,
-	0x1fbf49ce, 0x4cdb3478, 0xa5a3b3f1, 0x8a7bfbbf, 0xd16b7cbb, 0xc70bb8f1,
-	0xeb4e7ab3, 0x6f184e70, 0xee8b855d, 0x47e036a5, 0xeeffa114, 0xffbe8932,
-	0x040e1b34, 0x3a5445ef, 0xf169f537, 0x65ff0f59, 0x1ddff195, 0x617f42c8,
-	0xa4e88b8c, 0x2273ef42, 0x4fba373e, 0x571e5f91, 0x871beed8, 0x7af18071,
-	0x14fbbe26, 0x3bac4534, 0xe0426f0e, 0x44895379, 0x0a1a73df, 0x86e5d1bf,
-	0xa32fae54, 0x3475ffeb, 0xdd1b83d7, 0x773ce8db, 0x50b2ba3b, 0xf913efaf,
-	0x2964b310, 0x285fbf48, 0x1cb1dd77, 0x65915bf6, 0xc011bb1f, 0x6853a32d,
-	0x4f4afbfd, 0xd8f81c53, 0x21c65785, 0x76b31dfd, 0x79ce305a, 0x53dfc9cc,
-	0xf9951387, 0xf29db77b, 0xa4f2312d, 0xe958f2d5, 0x95fdfa22, 0xef7cfc7f,
-	0xdf7cd1da, 0x0af5524c, 0xfb815b8c, 0xdef9424d, 0xc3f902b2, 0xfc83b998,
-	0xaa73e8cc, 0x88b35f70, 0xfc64f3de, 0xb6bf4f7b, 0x3f782c86, 0x0267ed1c,
-	0xff426c7d, 0x3d04f778, 0x5eadaf7d, 0xe782e7e6, 0x1fa4e788, 0x997e13a3,
-	0x65667c76, 0xc0fa633e, 0xde1d6079, 0xf13ad0d7, 0xadefaa3e, 0xf86292bf,
-	0xc9d683b5, 0xf9589efc, 0xcdcfd1b0, 0x9a20b276, 0x1615b386, 0x709fa176,
-	0x99c69f30, 0xcce3e56d, 0x9b7c7112, 0x1759ffa0, 0x81df9475, 0xcf80d6f4,
-	0x7927cc95, 0x50f5cc72, 0xb7ac1d57, 0x41c6ce1e, 0x569346fe, 0x5b39090e,
-	0xf745525f, 0x07dcc7bd, 0xbfbea3c6, 0xe1e574be, 0x9fc22732, 0xb74154d4,
-	0xd52fa529, 0x945a5d20, 0x4c2f8a2e, 0x5d74cb76, 0x36b97d78, 0x17afd14e,
-	0xb44bf4a3, 0x928fa8be, 0x54f7113b, 0xf9c4434e, 0x4b9f72cf, 0xab83a488,
-	0x2f1ccbc7, 0xd67baf7e, 0x1da71e05, 0xe9f7978c, 0x7803a573, 0xd8ef3e89,
-	0xa73e8978, 0xeaad3c01, 0x8c1dcbaa, 0xbf6f155f, 0x1ac9792e, 0x8d1be799,
-	0xaf8a1fb7, 0x4156d1e6, 0x579e5caf, 0x3b7dbe08, 0xb771443b, 0xeff94bb7,
-	0xff731d4b, 0xb3bfe296, 0x0d63a858, 0xcbe045ca, 0xe8f94239, 0x344ce423,
-	0xf4f8061e, 0xbf2e283f, 0x28b7f3fb, 0x21caaa2e, 0xea25f213, 0xea1fc113,
-	0x1f9099b9, 0xf02f6f91, 0x2d5e87ef, 0x457ca87f, 0x383f21eb, 0x1fcc8fa4,
-	0x5fc5dffc, 0x18cd717b, 0x52167617, 0xd1cab83c, 0xac7bc7a5, 0x3dd250c9,
-	0xd27f8892, 0xf5919c3a, 0x591c6e3c, 0xa12f714f, 0xa6b8d4f7, 0xbb3ebeda,
-	0x5518412b, 0xc24d47a4, 0xc4fd51de, 0x64538e7d, 0x54faaa7f, 0x57fef716,
-	0x08f74fab, 0xfb543a7d, 0x79bb73de, 0x43cbe7dc, 0x1c800f3d, 0xa46f9c9f,
-	0x0e4cb8ef, 0xa3dfcc3f, 0xfe498470, 0x9137746f, 0x69fb0c1f, 0xe604a346,
-	0xf3e64475, 0xf3bee5a9, 0xefd60a6d, 0x0af4bb95, 0x16ff07f5, 0x568603e0,
-	0x0d869dfa, 0x137d738f, 0xd651f457, 0xba83dee5, 0xe6994fb3, 0x61efc24a,
-	0xdf835f6f, 0x8c2a0b01, 0xb598ebbe, 0xee458bb4, 0xdc31a5f7, 0xff9c9daf,
-	0x68071dd6, 0x69ea1fdd, 0x035768dd, 0x9d964f9d, 0xcfe7050e, 0xfd23dbf6,
-	0xf7d97dec, 0xb7009dda, 0x086c697c, 0xa3c37ad1, 0xecf3017e, 0x078d5733,
-	0x73ed8d4b, 0x0bf5181f, 0x7346c7c0, 0xa3cc04d5, 0xdbdfb6ac, 0xdae51f3e,
-	0x60265bd9, 0xbcec1bfc, 0x83b7d456, 0xcdb7dff6, 0x5d3bbf8c, 0xd69f78ed,
-	0xabafa231, 0x5abfbf06, 0x48f7e0ed, 0x87bed1be, 0x7b404cc6, 0x73c1ec39,
-	0x0c9f344f, 0x164cdd22, 0x2f1765eb, 0xbd41fc51, 0x9e73d997, 0xf8ff47d3,
-	0x8fb80f40, 0x455cbf6b, 0x7db922f7, 0xa026f9ba, 0x3c7d75d5, 0xf1db0c7f,
-	0xbf58e07b, 0x001d8628, 0x4be75cf3, 0xcaebf3c6, 0xde8637ba, 0x36fbedcd,
-	0xf6e783e0, 0x44bc7064, 0xc31e6fb7, 0xafb882ed, 0x9272cfde, 0x7ff5c03d,
-	0xf312c0b0, 0xa9b7553b, 0x3b1ad2fa, 0x552d450f, 0x23daa579, 0x21b35f80,
-	0xc69bbf02, 0x7cfdff70, 0xf103a7a9, 0x7fe77df7, 0xe50b710a, 0xf6cf52f1,
-	0xae91c331, 0x97ad5f04, 0xee01c663, 0xc5a3f31c, 0x13416e2b, 0x73beabef,
-	0x86e96fe9, 0x7441dba6, 0xf8e95065, 0xffe3a221, 0xe27bf48b, 0x20efd0fb,
-	0x14fe7479, 0xd347c3dd, 0x03bf4ab1, 0x9be6c874, 0x79e80692, 0x7ec1ba28,
-	0xe806928b, 0xfb7ea87a, 0x931fbfce, 0xe9c607de, 0xabdd2cbd, 0xd059b7f4,
-	0x540f7a91, 0xfd79ce29, 0xfeec8cd7, 0xf5463da3, 0x7e35c677, 0xca3fe811,
-	0x72b0aea3, 0x37b47fb9, 0x3d19fb97, 0x9a9fba66, 0xbe295ee9, 0x235d0dbb,
-	0xf211adc6, 0x75dba67e, 0xeaaf3959, 0xfddf550b, 0x43777c4f, 0x00800098,
-	0x00000000, 0x00088b1f, 0x00000000, 0x7dedff00, 0xc754740b, 0xeebd6095,
-	0x91a93fd7, 0x16883e9e, 0xc085a092, 0xeb404616, 0x7d3d05ff, 0xa71f3210,
-	0x900b18c1, 0x04e08b4c, 0x60dd491b, 0x9e3d90e2, 0x123231a1, 0x1f62cd9f,
-	0xbd6678cc, 0x8c030d39, 0xc077b19d, 0x0b611c56, 0x3837e2dc, 0x71c6ec4b,
-	0x3c4c9c18, 0x6c0843c2, 0xc718d36c, 0xbc4ab243, 0x0f7adef7, 0x0b756bf5,
-	0xcceb43db, 0x40e75764, 0xaabd5ea9, 0xfeeb75ba, 0x7ad3d56f, 0xcecc6333,
-	0x53f817d8, 0x08acbc3d, 0x65cb191a, 0xfc05f3f4, 0xebf2e2db, 0xdf632b25,
-	0xb4cbeeb9, 0x2c93f943, 0x1e670adf, 0x355faf63, 0xb188acca, 0xf6e3a9ae,
-	0xfa87b3ea, 0x8c08758f, 0x127b4315, 0xef768674, 0x0077c154, 0x27d1311e,
-	0x7d1e9d2e, 0xfd4c9fde, 0x8795cdae, 0x9d32fab3, 0xaf7a6863, 0x59b18d3e,
-	0xca0e9bf8, 0x332d9320, 0x5aedcca0, 0xcca012c7, 0x9636f92c, 0xb12e624c,
-	0xf2933184, 0x6bcae99e, 0x39f015df, 0xfe831993, 0x56f595eb, 0x0d5d7f30,
-	0xcccf31c0, 0x3889f1bc, 0xc9c9d37a, 0x97cd5ed0, 0xd769e30a, 0xfe9fde1d,
-	0xe4f329a5, 0x572e3630, 0xfbcdf5a0, 0xf04cf98c, 0xeb6e756b, 0xe7033602,
-	0xd1cc7187, 0x1e60a9c7, 0x1d01e999, 0x2adb5ee5, 0xaa6b3fe8, 0xafe5e1c9,
-	0x6cdef84b, 0x3e1bdfc6, 0x4ac67ace, 0xe2d9c686, 0x54fac809, 0x4c498ec6,
-	0x6f5b2fe9, 0xf8e767c1, 0xb2857ac3, 0xcd6e533e, 0xebcbc455, 0x07e1c792,
-	0x860f6778, 0xcb1d6f8d, 0x55633a58, 0x8b9f699f, 0x387d6d0e, 0x58fb305c,
-	0x5f4fe5fa, 0x33467cc0, 0x5d398fc7, 0x5d79f847, 0x3e90fa32, 0xeed4ae2a,
-	0x4b189362, 0xfc87ec96, 0x992adcf0, 0x36053e1d, 0x7e53f633, 0x0402b8af,
-	0xc29fed04, 0x738014bf, 0x5aef6e9b, 0x16ddd027, 0xa21f4c6c, 0x4c0b2597,
-	0x2e96381a, 0x9bd4d449, 0xea69c79a, 0xd44f57cb, 0xdb736fec, 0x43fa9add,
-	0xea6a661b, 0x354a27ae, 0xd59d55f5, 0xef56f19a, 0xff69ab9c, 0x686feed6,
-	0x7f9e6bea, 0x747f5350, 0xe911caff, 0x885f1a22, 0x89e991b6, 0xd23b0579,
-	0x3a4d88bf, 0x9cc5cffc, 0xf7f7a3d3, 0x7ec27f21, 0xb7af6ebd, 0xd5fe82ad,
-	0xe78d3f57, 0xc5f4b4fd, 0xf90072bc, 0x17d956a3, 0x402bc798, 0xad528d7b,
-	0xf445be95, 0x4536635e, 0xee951be4, 0x11560ab6, 0xda66afc7, 0x6db0aafd,
-	0x7e47aebd, 0xebd01a2e, 0x3759be61, 0x2157fcb5, 0xc706fc35, 0xc7afcc67,
-	0xa5cb84f5, 0x9318eeff, 0x609e397a, 0xfc017fb5, 0x8cc9acc4, 0xa3c74795,
-	0x5db7a74a, 0x6f5f6337, 0xeafccadd, 0xa0582b7a, 0xda3ee90e, 0xfc3b67ba,
-	0x516b927a, 0x5ebe1dd6, 0x6feffe15, 0xef815f86, 0xf323ff5f, 0xdb1013ed,
-	0xe6fc88b2, 0xcfeb5ddf, 0x02402bb5, 0x7a1527bc, 0x278291a8, 0x0e908b12,
-	0x83650398, 0x51f99071, 0xc133d40e, 0x9652846f, 0x38af041c, 0x3034ef68,
-	0x7e71eb2a, 0xa6861071, 0x35eb45d2, 0x288dca0e, 0xa92c456f, 0xebc79cee,
-	0x875e068e, 0xd52ea8f7, 0x3ee7baf2, 0xea92875e, 0x43af275e, 0x5aefaa3f,
-	0xb8cef58c, 0x014489c0, 0x5825beeb, 0x5a1e0e37, 0x05ff4bca, 0xe4994a81,
-	0x5de83896, 0xec7ea7a7, 0x3707af22, 0xf2d0fa71, 0xf65e3183, 0x5f19b3f9,
-	0x813f3c3d, 0xfdc24dbf, 0x006fd75c, 0x828ad43c, 0xd5ef0ec3, 0x3f87320c,
-	0xe4d5f715, 0xe097d990, 0x3133a033, 0x8ccf886d, 0x4ab1982c, 0x0f793e20,
-	0xedcaadf1, 0xe968e3e1, 0x5af51eab, 0xfc3bec01, 0xe51931be, 0xfaa7a730,
-	0x2c12e0b2, 0xd013f9f1, 0xfc327b3e, 0x1f4e1e4b, 0x32a25c2a, 0x5fb5a55f,
-	0x32b6aa8f, 0x59b72618, 0x8559d117, 0xd92c9d79, 0x716dcb87, 0x2e2fe550,
-	0x56e1c22f, 0x1f39ade5, 0xfb1a6cf8, 0xb9967c3a, 0xaeb36a0a, 0xd9f0abbe,
-	0x933e30ba, 0x8496f7ad, 0x321019f0, 0xb7d9f0d3, 0x276e9e89, 0x83094e5f,
-	0x4f182675, 0x23e80cf6, 0xc05499ca, 0x3e244243, 0xb21bfb9b, 0x97c8a21f,
-	0x5817f037, 0x987e6e67, 0x5cf4519c, 0xfee7aab5, 0xdda2b3a8, 0x117a67e2,
-	0xc87c70cb, 0xd2313b2c, 0xbe3cb573, 0x6bba0609, 0x90f80ea8, 0x63be810f,
-	0x06dc151f, 0xcec99bcf, 0x805ab862, 0x31e2aac7, 0x71ad6e8c, 0xec909d2f,
-	0xecf505bc, 0x4e6e8518, 0xdf11a766, 0xc7bd76c3, 0xb59de442, 0x01f1cbe8,
-	0xc70937cd, 0xbf226673, 0xc6db40d5, 0x33fde182, 0x99f00fb1, 0x3e7cc835,
-	0x08eacf78, 0x46af5808, 0xf48d9efd, 0xfe51eacf, 0xe8095f57, 0xe5a5ea25,
-	0x00745b97, 0xa4013fbf, 0x517c8b57, 0x642e9c30, 0x7ee3d3e6, 0xaffdd57c,
-	0x90341fb6, 0xffdb0ebc, 0xcfb0419a, 0xd5394e00, 0x1afa20e4, 0xc8cf6464,
-	0x48c7c14e, 0xbc21acbe, 0xade3f6a8, 0x176826f6, 0x622e91e8, 0xf640b37b,
-	0xb36ca7d0, 0xf305f381, 0x867a55fa, 0x30afcbe7, 0x34ed1139, 0x7ed4f3cb,
-	0xfa23136c, 0x3c97b6a8, 0xb8476755, 0x44cc7606, 0x0abd24b8, 0xc7153f97,
-	0x70e260bd, 0x7f08daf9, 0xe4fe0ad5, 0x43331d41, 0x694fbfbb, 0xff5fa30f,
-	0xfcd3b720, 0x702bc44f, 0x43f0c8dd, 0x4ed007bf, 0xe5689306, 0x43ff03dd,
-	0x69dcf784, 0x01df3f77, 0xf028ae5d, 0x6e856ffc, 0x5124da3f, 0xf5cd3eb9,
-	0xc7a07cfd, 0x7c6e917f, 0x0fc866e2, 0xd5f74439, 0x9027cff6, 0xd9f1521e,
-	0x10f48637, 0xe8f84dc2, 0xdb8344b3, 0x387510aa, 0xe5bf0abc, 0x2a57c88c,
-	0x577c2a9c, 0x0bab7a7c, 0xe7b37bc6, 0xf61c135f, 0x454bf821, 0xfb847ee7,
-	0x674fc1cd, 0x92ef88b8, 0x34667635, 0xfc5266f9, 0x964ca488, 0x3ea2a62b,
-	0x85cc7388, 0x74cb8c75, 0x364cbad1, 0x02fd1da3, 0xf393274b, 0x82734860,
-	0xf7f08ccf, 0xd2ec37a7, 0xa9d6fb43, 0xfbc13322, 0x36bcb35b, 0x09fea75a,
-	0x9399eb86, 0xd60361e9, 0x6577f3e8, 0x9c11293e, 0xbf475083, 0xa2f1c6c7,
-	0xf8f4689f, 0xc75fb9e0, 0xc10a1cd6, 0xee02c1cb, 0xe7cd9d8f, 0x1e17dae5,
-	0x842976d9, 0xad0fda3f, 0xbdddd4d3, 0x2976dbdf, 0x106ede54, 0x3697dc44,
-	0xd9db8e85, 0x5ff404c0, 0xe13b455a, 0x903743a1, 0x2c6bf586, 0xae0a7e78,
-	0x008fe70f, 0x5be73fff, 0xd2ff3d62, 0x8ff650a9, 0xff69fee1, 0x0df91f24,
-	0x2b1ffcea, 0x5f38ffeb, 0xa6387317, 0xb3ba1e01, 0x9f70c5bf, 0x3f7c6c6a,
-	0x7a72504d, 0xf54372e6, 0x739e8677, 0x3ea55179, 0x73de3a0f, 0x1ce91d12,
-	0x994c76a8, 0x7de911f6, 0x71bbd227, 0x48b5bea8, 0xf08be8d7, 0x220573fe,
-	0x16c07bc1, 0xa15b3db9, 0x5c139d97, 0xdfe8d9dd, 0x6c73ab3f, 0xcbce2586,
-	0xe51e3adc, 0x7adb56fd, 0xe2e653a2, 0x38c058eb, 0xf4cbcebf, 0xd1e81978,
-	0x82b7fe79, 0x8dd62a42, 0xf886c2cc, 0xe70bf557, 0x01d13e89, 0xd7f2bbfd,
-	0x5ddd7199, 0x1c66f5b6, 0x82d684cf, 0xea3c386e, 0xe6ec0fba, 0xf4cbcef3,
-	0xb2e9e089, 0xc57bb9b9, 0xa33fa801, 0xee5e7bac, 0x6aaf6a3a, 0x09149ff4,
-	0x4367e07f, 0xf568e8dd, 0x87263ce2, 0x3ac246bd, 0xb2c66c73, 0xec89784f,
-	0x0dbf5513, 0x9dad4fe9, 0x91bafa72, 0x15d763e4, 0xf244cf9d, 0x07305e53,
-	0xbcaf9fde, 0x7b720d6d, 0xa3bf6bbe, 0x1cf7c45f, 0xf3e3f902, 0x764dbf73,
-	0x2e77359d, 0x56b3e7b7, 0x98549179, 0x3fa1f04f, 0x5bc54f31, 0x195f569e,
-	0xa0b7171d, 0xd4de30fa, 0x2c59d1ea, 0x2abe90c0, 0x70f3fcc2, 0x40bb3b7d,
-	0x5972d7b1, 0x2d2bda31, 0xc863df26, 0x420d960f, 0xe2a1c23a, 0x8e814575,
-	0x7c8620e8, 0x942667b0, 0xb465d95d, 0xd3ccfaaf, 0x5f980417, 0x4366df17,
-	0x8cdbd0be, 0xb31bc47e, 0xa80d1f8a, 0xffc24df3, 0xb7b22533, 0x2f848eb0,
-	0xfc79397d, 0x86c7966e, 0xb032eceb, 0xa7f248a6, 0xfdf380b6, 0x927e5907,
-	0x8ddad10f, 0x7bd2041b, 0x66377caa, 0xc237d932, 0x5c8cdb78, 0xd25f80ce,
-	0x3ebf402b, 0xffa017a4, 0xf7b35a17, 0x7ba205e9, 0xadf1e519, 0x12efb152,
-	0xfe1fb90b, 0xca898166, 0x547eca93, 0xc336717f, 0xaffc8235, 0x8430f2aa,
-	0xc7ca94df, 0xf1f26533, 0x732f224c, 0x2e3f7195, 0x5cdc7ce2, 0x5fb97b14,
-	0xfb7a339a, 0x8d7a4b1c, 0x90285287, 0x98dd79e8, 0xc52e4987, 0xa3396f12,
-	0x5da33788, 0xa7073fa1, 0x73fdb513, 0xaaffde45, 0xb274e620, 0xe51472b4,
-	0xa4e92c41, 0xde83cfe2, 0x79ff97cf, 0x68da47ec, 0x99a3e3ae, 0xe042d4f2,
-	0x2e9cbf93, 0x96e583df, 0xbbdb23d7, 0x772f63f3, 0x72801ed3, 0x37df04f1,
-	0x79b3e923, 0xfb97b185, 0x48bed14b, 0xf845f6e1, 0x3d15cbfc, 0xd2794b14,
-	0x11b36504, 0xff011fd6, 0xfcc28e8f, 0xef5073cb, 0xe5817b72, 0x0fa4b99e,
-	0x67e1dfb1, 0x3ec42eb2, 0x1c147b06, 0x0543b441, 0xeddd9239, 0x2d7efd8d,
-	0x643f487d, 0x5c61ccaf, 0x2ff3a81f, 0x7af8e12c, 0xb0e0147a, 0x25eade00,
-	0xc29baf6e, 0xbfcb50e0, 0x7dbd8c2d, 0xe043e92a, 0x1fbb0548, 0x444205cb,
-	0xd0a7af7b, 0x1a7e7318, 0xe2d9780b, 0xe4918d60, 0xefd8c9c9, 0xca0d9a4b,
-	0xd3cee9aa, 0x4b96d728, 0x5c60e787, 0x1ff8fbf9, 0x79d21be6, 0xc1a561be,
-	0xaeff45e5, 0xbc3bb24b, 0xac478c76, 0x7ccafaa2, 0x52af43bb, 0x94dfb63e,
-	0x6c05db7c, 0xe57d51d7, 0xda1f24ef, 0xd617dfc3, 0xf1c6c99d, 0xfb1deb36,
-	0x959dc618, 0xe78d837c, 0x9e36ac1b, 0x3c6d109f, 0x29b560ef, 0xcf1b0779,
-	0x4a6d583b, 0xf3c6c1de, 0x929b560e, 0xbcf1b077, 0xe4a6d583, 0xef3c6c1d,
-	0x7929b560, 0x3bcf1b07, 0xde6a6d58, 0x1538d3c1, 0x9e3691e3, 0x78dab077,
-	0xe36ac1de, 0x97980779, 0x3c6c1de7, 0xf17000ef, 0x722d83bc, 0x943ac1de,
-	0xf1ff2077, 0x67a49618, 0x547f5fb8, 0x7b06cfa9, 0x786334dd, 0xe76ab55e,
-	0x17182dfe, 0xfc7209ab, 0x5e783955, 0x77b414d9, 0x457e300a, 0x04dfb066,
-	0x114565fe, 0xb0d5f0c3, 0x13f3c3f9, 0xbde7d9dd, 0xb0a3fa02, 0x03bc2997,
-	0x18ea29e5, 0xfe7c3f7f, 0x3b577161, 0x65d6e78f, 0x3bf08b7e, 0x78482cbb,
-	0x8718e7c3, 0x13f253ad, 0xffad56b5, 0xb2e67f2a, 0x995f71f9, 0xf80899d4,
-	0xbb6d4590, 0x8c2ff988, 0xd7f15ebb, 0x6ab7dc61, 0x15771b50, 0xb8d41b33,
-	0x844bcf3c, 0xe1df39c1, 0x6b045f1c, 0x2a7f016a, 0xc1cfe601, 0x53ae15a4,
-	0xa45e7c12, 0x881bddb7, 0x453bbcbe, 0xaa6814c7, 0x9e606404, 0x6a2012a5,
-	0xc654d286, 0xf24cd2ac, 0xfe9d389b, 0xf1bdd4d7, 0x030f28d9, 0x6c04467a,
-	0xf9a83c23, 0xbf580485, 0x2bfc8334, 0x332aeff2, 0x3a47bffd, 0xcc82eb50,
-	0x5d8238f3, 0x2f80cd62, 0x5c266ef9, 0xceab9336, 0x45eb6f90, 0x73c335e6,
-	0x9b37e941, 0x2d4e2905, 0x76f28933, 0x6541ccb5, 0x695774d1, 0xcea3f011,
-	0x7ae175ec, 0x0966ecaa, 0xee3d85f9, 0xf148db3c, 0x32e97ae4, 0xf60049e0,
-	0x48da62f8, 0x2ec88a76, 0x451cf8ab, 0x2f1f48bb, 0xadc92278, 0x61ebd88a,
-	0x0a2a83b2, 0x2dc7c919, 0x7cfcb22c, 0xcfcb84ac, 0xdf5d4b37, 0xfbd73c44,
-	0x878fd516, 0xd0be8f2e, 0x6d9b794a, 0x5bc2f161, 0x6f628afd, 0x90e72447,
-	0xe901b93d, 0x8f04f17a, 0x1688e10d, 0xf62a78c7, 0x1b49ecf0, 0x767baec1,
-	0xd45aec14, 0x2aecb743, 0xfa9399fb, 0xb1ca3b50, 0xd0ba4f0e, 0x9092baef,
-	0xc3ddaa38, 0x8d67143c, 0x6979af1c, 0x9920e214, 0xfe13bfa8, 0xea639d0b,
-	0x87fb023a, 0x54bcfbe5, 0x428ef8e1, 0x634be387, 0xa0d317cf, 0x613e27d4,
-	0x771b8d0b, 0x970e0459, 0xf5c0d041, 0xfdff62b9, 0x78f624a0, 0x7d72812a,
-	0xf22efca9, 0xf974d561, 0x7caa5867, 0xbae1df3b, 0x2d29fc40, 0xf9024faa,
-	0x767f66bc, 0x0689ea01, 0x2ae35edb, 0x52d5f780, 0x3a22fdf9, 0x5b1ff46f,
-	0x1eb16e1e, 0xf7bc478f, 0xa3cb22b9, 0xc50911bb, 0x28de4fe4, 0x67e4fee2,
-	0xfe288784, 0x638bafe4, 0xea7b2fbe, 0xc9fc8673, 0x5b1ffe70, 0x639de3cc,
-	0x068e0147, 0xf1465728, 0xc28ca6eb, 0xbf5a8dfc, 0x443ebf6e, 0x854110ce,
-	0xdc6c69e6, 0xfc1163af, 0xba35973d, 0x147b37bf, 0xf310b1d6, 0xf591b571,
-	0x31c57dda, 0x7e96aff7, 0x3307ca03, 0xd0a9fd5b, 0x6f30bcc4, 0xb2be50da,
-	0x0fafd5c9, 0x383f738d, 0xe537e0e1, 0xb37e7008, 0xf272e638, 0xf91e9c7c,
-	0xe119bd75, 0x7e066ae9, 0x255fb08d, 0x9bffdc25, 0x9611e13b, 0x3a637688,
-	0xe411f743, 0x3637cf09, 0x83637e29, 0x2a767fa2, 0x2c53d472, 0xe52ce952,
-	0xe851b9f5, 0xfbcad7fa, 0xb69c4a8d, 0x2bf26251, 0xec7ff491, 0x38fce6e9,
-	0x71c6e728, 0xf30def38, 0xf453dfcf, 0xd3d89ec4, 0xa00c9ecf, 0x91b5b993,
-	0xf63075f1, 0x0274b174, 0xf6d4bfcc, 0xf8901cf4, 0x0d9b2fb0, 0x2e9c5f94,
-	0xef0c58bf, 0x57c28b6d, 0x69782b9f, 0xb03a3e86, 0x34a05bfb, 0x9010f942,
-	0xfa405481, 0x6fec55ed, 0x14308e01, 0xf1de0420, 0x3af4e7e8, 0xce7c1ee4,
-	0x7fe46d5c, 0xca1bc884, 0x3999569f, 0x83a774df, 0x0efe88ff, 0x9339d333,
-	0x9fcf20ae, 0xfcf26576, 0x6a3c3868, 0x456ff4fe, 0x71cf198f, 0xc4166577,
-	0xebddf285, 0x6f26989b, 0xe78575dc, 0x8a4fc185, 0xc949fad3, 0x8f8527e4,
-	0x74b9909f, 0x247fa85e, 0x021fdcc8, 0x5c50267f, 0xa917e43c, 0x7c98cffe,
-	0x7ff15cf9, 0xcd1dfd02, 0x4947119f, 0x07308b0f, 0x74ddff3e, 0x8f10dff9,
-	0x1fd3d023, 0x9fd3d0a3, 0x347fdfb0, 0x11cc627a, 0xf0cc68b7, 0x1eb2bb71,
-	0x708eb5b7, 0xd321203f, 0x54ce9119, 0x9b7a02fa, 0xe8763250, 0xb4f3217d,
-	0x4b136f4a, 0xbd3ebf8a, 0xf0bec05d, 0xafe1acef, 0xd149d6ec, 0x7ab59dfb,
-	0xfa0f28cc, 0xf19bd732, 0x99d4c49e, 0x6bce072e, 0x006c9911, 0x3e5cbb38,
-	0x007b9e33, 0x64bf2f3b, 0xcdc1bc84, 0x7e3f2e22, 0xdcffecad, 0x2aff9c09,
-	0x7dbe0b96, 0x6c4d7fc0, 0x4df70197, 0x4958ff7d, 0x7b88fdec, 0x35ee4872,
-	0xf7208c96, 0xe2f8565e, 0x2b5f0573, 0xe729d6da, 0xfb445899, 0xfdec5567,
-	0x942b348c, 0x45d75273, 0x745be3a4, 0x2285e787, 0xe21467ac, 0xe4c7e7e0,
-	0xcd4c3ce0, 0xfc406d2b, 0xf1c4563e, 0x7dfecd17, 0xb3fc146a, 0x4ad70089,
-	0xfd0199f6, 0xc7ff5969, 0x11e748ac, 0x39d9158e, 0x0390069c, 0x5995df80,
-	0xfc31b7ba, 0xb5a495d9, 0x67f7d487, 0x67aefe2b, 0x5267e414, 0xf1c3ce0e,
-	0x4c0e7e1a, 0x3ec5cf2d, 0x88b4b01e, 0x80ffb9fb, 0x73fc0efc, 0xe358a4a8,
-	0x64a8fee7, 0xb5f73f64, 0x1adc8f7f, 0xcba8e850, 0x7d9ed911, 0x40fbf621,
-	0xdd60e0e7, 0xb9157cef, 0xaa6f6e11, 0xdbd89ee5, 0x7a59697b, 0xd1c3879c,
-	0x24e7b4c8, 0x28dff16e, 0x8f5d2de0, 0x77e968f3, 0x5ffae325, 0x1a58c385,
-	0xe78c73f3, 0xff31e867, 0x7d79f9c3, 0x94be2ba9, 0x198f36ec, 0x07d837f5,
-	0xb95f6714, 0xcd1f2539, 0x6b67d82a, 0x93be96a9, 0xefa6474a, 0x403bd2e4,
-	0xfc9caadf, 0x534c6117, 0xa899bca8, 0xa5699bc8, 0x29afdfb1, 0x8e48af18,
-	0x632baf2c, 0x73dbe71f, 0x79744e77, 0xfb379eac, 0x4f1b4147, 0x8f25bd6e,
-	0x69474e63, 0x7921faa9, 0x7087eaac, 0x5e868d3c, 0x0bd10c48, 0xcce4510d,
-	0x3631c068, 0x9db51f04, 0x98afe502, 0xc0a6f98d, 0x39d89daf, 0x96c7dee4,
-	0x4f138851, 0xc87f8d0f, 0xa047af60, 0xb1a5dde3, 0xbca37fcf, 0xdb7c37e9,
-	0x47f9d236, 0x28c5d5a3, 0x3173623f, 0xb19fec3b, 0xf6f295b3, 0x94ad05c6,
-	0x029d6687, 0xf498fde5, 0xab79f92e, 0x30a7de6c, 0x9e5c367d, 0x5e398d6c,
-	0x97d8728b, 0x28c537f6, 0xf8ebcd7e, 0x37f93a4a, 0x153ca3af, 0xb347ee24,
-	0xf74ecc0d, 0xb97cafa4, 0x202f58fb, 0x9a2f3012, 0x763ee8c4, 0x7ac7e1a7,
-	0x051b47cc, 0xe65cfe3e, 0x974ff9e7, 0xf0a3fc77, 0x31a0e59e, 0x7f543b7f,
-	0xfb4d9a51, 0xcfe569de, 0xf39bf6bb, 0x9ea5849f, 0xc19e15b6, 0xa753e1f3,
-	0xec1c5327, 0x6b8f03c5, 0xbc5aecec, 0xdf7e80c7, 0x7e861e0b, 0x35d329a2,
-	0x9c3b2471, 0xae927f31, 0xa89a508c, 0xfa5e7a94, 0xf86d9d05, 0xf7f73bfb,
-	0xbd67e848, 0x724cc078, 0x9e81ea7f, 0xe32155f8, 0x3e719627, 0xfe3d06b6,
-	0x35af0019, 0x093273d3, 0xf92b1def, 0xce799173, 0x632bc2d4, 0x0f9d00a4,
-	0x6b5791df, 0x2ebba50e, 0x794cd6a9, 0x639d5ce4, 0xfceb1d8a, 0xf4fc431c,
-	0x4082fdda, 0x112edd7e, 0xe19aef50, 0xec7a86ba, 0xc3eb890d, 0x496b53a9,
-	0xe72a75ab, 0x2de4761e, 0xc7ef8039, 0xf1a7af4f, 0x7b64593b, 0xe5c658cc,
-	0x99068bf0, 0x80f17de6, 0x55c8e748, 0x7c69debc, 0x0f30cbd6, 0xa6dea3e0,
-	0xa7d87ba7, 0xe5114e8d, 0x8134e9d0, 0xdf2d82ed, 0xee8578e9, 0x0288ec99,
-	0xb94a2fef, 0xa96cca9f, 0xf7a77f44, 0x748f2e77, 0xbfa55f7e, 0xa96433c9,
-	0x49c0ed0c, 0xff94269e, 0x36e4b6cc, 0xdf24f17c, 0xe68743bf, 0xcffc03cf,
-	0x227fc17d, 0x6b21f70e, 0xf75c78cf, 0x6a76a507, 0x1f0f45bf, 0xb0f442bd,
-	0xe3efc8c5, 0x8e717578, 0x858eb003, 0xcf1101d6, 0x8352184f, 0x2a6de794,
-	0x8b74f2e3, 0x81630fca, 0x7d3de01f, 0xc507bf06, 0xcea9da26, 0x84270726,
-	0x559ea3de, 0x0597aca6, 0xc2f9f132, 0xd83777f8, 0xf6158c1d, 0xb08b37a6,
-	0xef8985fe, 0x7a86c86e, 0x5e78ef49, 0xb3f778cf, 0xb2b1896c, 0x9f5e0cde,
-	0x9367eef6, 0x9bd15ea0, 0x3095ebc9, 0x9bb078d4, 0xbd9ab37a, 0xa4be3879,
-	0x0f15bf19, 0xfd7f1472, 0x45d26f52, 0x28355f8c, 0x031f87eb, 0xfbece3ce,
-	0xe2ef3a47, 0x78fd5b34, 0x86c9832e, 0x3419f8b0, 0x6077dc85, 0xff2409a9,
-	0xf30bfbd4, 0xf63f7f45, 0x84fd99d7, 0x2759bbdf, 0xad8073d9, 0x7e145fdd,
-	0x5c2e7b79, 0xc8d96dee, 0x8c4e785c, 0xef0966b1, 0xd64c0833, 0x78e3c17d,
-	0x855f9c4e, 0x187f9d47, 0xc8b5b05c, 0x3d70439f, 0x70a8e34f, 0x7937cb5d,
-	0x6b7ade51, 0x0427ae59, 0xe084d74f, 0x456c180f, 0x0f1dacda, 0x1b5d3ee1,
-	0x40209c13, 0x1b7cb93d, 0xb1b5dbed, 0x8e081fc1, 0xef81ba90, 0x096f5b63,
-	0x289763ed, 0x9b9d21b7, 0x216ed68c, 0xb8eeb191, 0xe60c1984, 0xe5d631d9,
-	0x406e7bc5, 0xd8ef7477, 0x1c74659b, 0x8beb3800, 0xc7a1f9b4, 0x83fb3a15,
-	0x98e60f22, 0x01ce7976, 0x047bba5d, 0xdc70f786, 0xa88c3783, 0x5df616ff,
-	0xa4be6234, 0x11a2e7a3, 0xeb03bee9, 0xf3c74e30, 0x6ff988c6, 0xbd5eb963,
-	0x91e74a2f, 0x4f1c4bd6, 0x7aeeb2a7, 0xe9e0152a, 0xbdd02d58, 0x9247f5bc,
-	0x7d7d60e6, 0xb192ae2b, 0xe78755e5, 0x38b4b920, 0x72c29ffb, 0x95381b25,
-	0xccb4240a, 0x10f667a5, 0x4d62b93d, 0xe887b33c, 0x8a4f16c9, 0x1772bea6,
-	0x280cceec, 0xfa686637, 0xeafee531, 0x83f43632, 0x949a98e7, 0xdb665c7d,
-	0xeeb8c019, 0x3bc19732, 0xc2de3210, 0x3262cdbe, 0x1c11edc2, 0xcbd28d74,
-	0xe0ad3fcf, 0x1c52842b, 0xf7cf1f7a, 0xefc40af4, 0xba7a6d1d, 0xcbdcd3c7,
-	0x35e6aeed, 0x202ecf82, 0x0dbdf81e, 0xed40af77, 0xeba7deee, 0x1bef1193,
-	0x47000f00, 0x7d84f8da, 0x9347112c, 0x4ad5dce9, 0xdf775605, 0xb38e0339,
-	0xdd023be2, 0x9bbf5567, 0xb2bfc2a0, 0x91ce91a9, 0xa45e7c01, 0x4d9d754f,
-	0x5ce947f6, 0x9789cad5, 0x6187a80d, 0x3406977d, 0x5bd6d4f8, 0xcafada3c,
-	0xd1fada8d, 0xf29ee532, 0xf90d3634, 0x209978e9, 0xb52439e2, 0xf9d651fe,
-	0xe75ef1b7, 0x0a79d16e, 0xe8cdb3e9, 0x7efa819f, 0xbaa2e8b7, 0x3bcf0eda,
-	0xf89df118, 0xb1f100e1, 0xc5b9fc40, 0xf8354b20, 0x8176973d, 0xb60576e8,
-	0x0f67f3ab, 0xfd754fbd, 0x554dfaf0, 0x1b9c5aee, 0x4730bbe8, 0x90ed0905,
-	0x9316517a, 0x222f88f3, 0xbdf9779e, 0xa36f07c2, 0xeeb803f6, 0x7d852242,
-	0x44feebba, 0xbde6179f, 0x3a56cdeb, 0x215776e7, 0xf91d81d0, 0xd6e7475e,
-	0x2f79e3e6, 0x7903ef28, 0x2ef28168, 0x9226a1fd, 0x128d33ef, 0x9ce577c9,
-	0xe42f2a97, 0xb6e7b517, 0x219e67e6, 0xe7beeb3b, 0xb579d276, 0xc17239c9,
-	0x2d0fa8d3, 0x471dfe7c, 0x1866df04, 0x34ef23a7, 0x3271cfc9, 0x61d72f3f,
-	0x2f68e453, 0xfd7551c8, 0x50e3bfb0, 0x692261ae, 0x9bcd1e41, 0x5da9566e,
-	0xf8283926, 0xffe8756b, 0xdde6538e, 0x75a76d5f, 0x487a3da7, 0x316775c0,
-	0xe60166ef, 0x7c3a82bb, 0x55f950ec, 0xf8b5d7ed, 0x565de80b, 0x5b63b5af,
-	0x65e3d745, 0x6dbb5f30, 0x2dcfc8c0, 0x1fa88d06, 0xdef8e0ee, 0xf2c3e348,
-	0x50ee7475, 0x4730fbe2, 0x7680983f, 0x39a3face, 0xf608d8e3, 0xd3acde8d,
-	0x148311c8, 0xf33791a7, 0x67f2b573, 0x772b43a1, 0xa39651be, 0x4f245f69,
-	0xdfdfb4d3, 0x3fa9a858, 0xbcd4ace0, 0x9d5360ff, 0xcdb26ea6, 0xb16fbcd3,
-	0xe3d4d62f, 0xde6b9773, 0xa558e31f, 0xf5bd3769, 0xed0126a3, 0xc077b371,
-	0x06e87805, 0x1e4b28de, 0x12d323d2, 0xe32865e0, 0x2c562d0a, 0x744df3bb,
-	0x3c7bb64e, 0xec4497e8, 0x773a1dff, 0xc97c4e69, 0xdfe5035c, 0xfc5abe0b,
-	0xc9a00e7e, 0x3ddbf685, 0xf0e3684f, 0x5f38abc7, 0xb94365a9, 0x280ac1eb,
-	0x67b05ef3, 0x81e97bf0, 0xcc7f707b, 0x45db8c71, 0x2ec999af, 0x5376899a,
-	0xb071bf88, 0x397e66ba, 0xbe427bf6, 0xf582f917, 0xbc0a6932, 0x3b08cfb7,
-	0x35ee7a8b, 0xebcbf523, 0xe685d01d, 0xce597ff7, 0xceb3c1e5, 0xfc717bda,
-	0xb2d03e8e, 0x7dcf4fc8, 0xaebf4468, 0x013fafa3, 0xe70cd9f5, 0xcfb44687,
-	0x7a2b9e87, 0x61c60c4e, 0x0e1fe39c, 0x63de23e9, 0xa46e5edd, 0x722b4ff1,
-	0x7a3be5bd, 0xf78b4f3a, 0x864a6b37, 0xe1cb73e4, 0x63ef1fa0, 0x7bf3b4b7,
-	0x368e789b, 0xf9069c92, 0xbca861fc, 0xf41d367d, 0x4f1a4cc1, 0x97960fa3,
-	0x3edee9f9, 0xfbcd6fc8, 0x5c34972b, 0xc8257cc5, 0x4cf3ed71, 0xb1961e7e,
-	0x73fa0301, 0xed35d720, 0xfb95cb1b, 0xde58d39c, 0x2e072017, 0xdbdf2338,
-	0x9f8abb7d, 0xaae0b833, 0x16787da3, 0x47e789f0, 0x3f861d9f, 0xe1dbd78e,
-	0x81a465ed, 0x661bfd90, 0xff7157ff, 0x7228e5ea, 0xbfb2a2fb, 0x014084fb,
-	0x33b7550a, 0x8577e88e, 0xa5ed75b9, 0xcf97dc42, 0xdebfa2b7, 0xee8123f2,
-	0xffb2ffc1, 0xac3b34ad, 0x54f878df, 0x7697de1a, 0x86953a1f, 0x0cdb89f7,
-	0xcf68cdf6, 0x3dd07d03, 0x3f5e8ee4, 0xa87edfc1, 0xb79f1fb0, 0x140e0af7,
-	0xeb9eeec9, 0x364eb40d, 0xa3fd15b0, 0x3ae0517d, 0xabedce58, 0x2a76e5c3,
-	0x13982edd, 0xc98f7ef5, 0x1e9013e7, 0x5c213e40, 0x820fc047, 0xe66dbefa,
-	0xd4f648a6, 0x27df0565, 0xde1919b7, 0xfe836dfb, 0x59d38eb8, 0xbdf88da7,
-	0xb0c39685, 0x71d7012e, 0x1c7881ee, 0xa181837f, 0xf7c2a19d, 0x03e05671,
-	0xabfbff5c, 0x2dcf0c0d, 0x27ad596f, 0x81bfbf7c, 0x87fa27db, 0x0335bd7f,
-	0x2e80cbea, 0x270f3bf1, 0x9d38df56, 0xbfbee301, 0x7569db86, 0x2f881b0f,
-	0x6e13ad97, 0xa50e4bdd, 0xff6e956b, 0x70d3a146, 0xdba70dfa, 0xe6baf461,
-	0xdbebd1eb, 0x90ecb7e5, 0x61f7a819, 0x438ce7ff, 0x731efa3a, 0x1a7e401c,
-	0x0718613c, 0x2ada4f70, 0x63c3c039, 0xa7bef5d3, 0x9c6e50d2, 0x6df9ede0,
-	0x7f2e057b, 0x7d71cbec, 0x8646dd19, 0x2a2e08f7, 0xd95176fb, 0x0a0b3b37,
-	0x62cfc8f1, 0xa9ca1260, 0xf9ce256c, 0x1d35818a, 0xe452ff46, 0x8ffa67f2,
-	0x87b77b6d, 0x2b7fefd0, 0xcaab74e7, 0xe64669c5, 0xf7c56c3a, 0x045f8d0f,
-	0xe06cbce3, 0x282735e7, 0x09c94de3, 0x52822c36, 0xe4e5c157, 0xd438156f,
-	0x3e149ffa, 0x437f2760, 0xe6685cf8, 0xd1b79ff8, 0xf8eb8cdf, 0xbd75c999,
-	0x305fde1c, 0xea1b7ce1, 0x3f49eebd, 0xb9dfe3c9, 0xee1d9073, 0xa27ff056,
-	0x63cf37fc, 0x3532cfee, 0x72d7f68e, 0xe90969f4, 0x68a532d9, 0x30f148dc,
-	0xe66ccdf7, 0xbaba014a, 0x5aa54399, 0xaafc745f, 0x82fc8071, 0x2fc40deb,
-	0xb9e9d337, 0x0553efda, 0x8e46e9ee, 0x4a97d607, 0xb6e41b7a, 0x67921658,
-	0xfaa0f150, 0xfb2996e3, 0x5b1ebf69, 0xcfee28c7, 0x8f84d3d8, 0x84e76d15,
-	0x41e71856, 0x02b06c83, 0x3627cfbe, 0x8534bdad, 0x626c9fb1, 0x3a0b05cc,
-	0x5cccc9bb, 0x6c7d0377, 0xd81ea892, 0xbbfaa364, 0x5e54ec9b, 0xa2c738b6,
-	0xa4e079fe, 0xede20a67, 0x671ed644, 0xed73cc2d, 0x41f081ac, 0xfdf4063b,
-	0x376b4298, 0x0cccf4fa, 0x947a37ed, 0xf028adef, 0x8333743f, 0xfcbe40b9,
-	0x8e83e702, 0x467f1bed, 0xe6b1cf72, 0x49fa037a, 0xb7176df9, 0xf1bddd62,
-	0x5f680d77, 0x04fa007c, 0x7eec0ce9, 0x9e501366, 0x81da339c, 0xa66f9a0e,
-	0xeb2f38d0, 0x77c80d82, 0x430263de, 0xf7a0fcfa, 0xd71c71ba, 0xe12d7457,
-	0xe6744df9, 0x48ad2d9f, 0xfbb8fc22, 0x7f7c75f2, 0xf7a1748b, 0xf9effa29,
-	0x87ee0243, 0x9dfda379, 0x467fec4a, 0xb7af90cf, 0xa41306d7, 0x02f87208,
-	0xa3978b8c, 0x86581d70, 0xbd1937b7, 0x413cf053, 0xe1c74293, 0xfa158bed,
-	0x941b4c04, 0x213229ef, 0xc1239f8d, 0x5258169f, 0x41f93262, 0xe7e038fe,
-	0xabbabe96, 0x811e9622, 0xcff5a87d, 0x762187d8, 0xfc3a347c, 0x437e25b2,
-	0x4329c3e6, 0x4323f475, 0x1fa07fef, 0x82fbe919, 0xe3c9aca6, 0xb9778a46,
-	0x83bec007, 0xc300eafd, 0xf4829ec9, 0x4fca8d3e, 0x91d9748e, 0xc171cc7f,
-	0xd82fa83d, 0x3bf23a5d, 0x7b5abdda, 0x87e141a8, 0x7a1ec506, 0x3feb42b4,
-	0x5ed49f81, 0x84a4fdc1, 0x3fe34ce3, 0xff273f85, 0x057c8cc9, 0xfd834ef3,
-	0xfed22579, 0xc7aed554, 0x2ed8137e, 0x740673a2, 0xbe15f48e, 0xe0a8bfce,
-	0xebe5547a, 0x48d7c865, 0xaf9cbdbf, 0xa96dc7c3, 0x1c0bf9aa, 0x7b945b77,
-	0xf157f710, 0x139fdaf1, 0xe7ee5f08, 0x1f4f0852, 0xb59ce7b3, 0x031f9740,
-	0x2e80fb1c, 0xf19d39af, 0x9affd049, 0x6c9f19cb, 0x1d03921d, 0xbf53c5cf,
-	0xa717936d, 0x19fd42b4, 0xef187ba4, 0x8a3ade93, 0x1cf43e6f, 0xbe753fe7,
-	0x52cbfc0f, 0x0d8a9f90, 0xda03a341, 0x262efb33, 0x7c581da0, 0xe414fee4,
-	0x6e7068c3, 0xdce054ad, 0x4bdad8f8, 0xf01e9c29, 0x455aee1c, 0xf49fb9bf,
-	0x6bff111b, 0xdfa23237, 0xd97ed7fe, 0x49fc7c81, 0xfa84bc5f, 0xf1a3e3f0,
-	0xd7ff945e, 0x3a7c998e, 0x6f10fc81, 0x8fb5c822, 0x91f7030d, 0x2f4479bd,
-	0x3ee8ffa1, 0xc83ddbf6, 0x4cd7ee8f, 0xb5b1f968, 0x51d75d7d, 0xddf5b5ef,
-	0xf2c4557b, 0x87e5d1a5, 0xd38f8df6, 0x6ffad57a, 0x28ed9937, 0xb9113f47,
-	0xfbdb589c, 0x6bbfd92a, 0xc0cc6f07, 0x47c7ea38, 0xca094fff, 0x379bf735,
-	0xb99e504a, 0x8251b8df, 0xc71feeed, 0x2dd9227b, 0x84f4b371, 0x665f5557,
-	0xe26a27bf, 0xfa141b45, 0xd5dceec8, 0x57f00938, 0x03896e7c, 0x7b6ab6f3,
-	0x139d14f1, 0x79fe2fdf, 0x21c3ca7d, 0x22033afd, 0xce8a8de5, 0x0eafc7d5,
-	0xaa47cba1, 0x94ef9a0c, 0x0f38d57d, 0x2df7e2b6, 0x0275c56f, 0xec0efa3a,
-	0xbfc880b6, 0xf046bb2f, 0xf601bfa1, 0xb23f784b, 0x923daea7, 0x9910f742,
-	0xbd3f9ce8, 0x1c53eb08, 0x5628eddb, 0x8726a7cc, 0x02cb4bd8, 0xe809bf3a,
-	0xe4cfa9a8, 0x203f7b27, 0x62baa45e, 0xfd743d47, 0x85b26337, 0xdc9a7108,
-	0x1ca0e777, 0xc0d78f0f, 0x5b8418cf, 0xa7ceafb5, 0xa651f8f3, 0x042dd247,
-	0x993b9ab8, 0x161d7884, 0x4b9a69d7, 0xf8f0a2f1, 0xdbb03d8e, 0x93ecfd8c,
-	0xabc21275, 0x8fb8a5da, 0xc0e4113d, 0x7972565f, 0x6757f2a6, 0x3af5e780,
-	0xc9e6b503, 0x69577e50, 0xcc7491ef, 0xece9780b, 0xc600ffbb, 0x1f073a17,
-	0xf30e9f8c, 0x98b7be74, 0x9ae79e61, 0x829e6b54, 0x9ae706fd, 0xa21bc81f,
-	0x1af9f09b, 0x345db92a, 0xd6442f64, 0x5f0aa57f, 0x2c1e968f, 0xd0f3fcac,
-	0x579fe083, 0x7cff7254, 0x709f8f05, 0x7f5c3cff, 0x1d5972a8, 0xef82ad77,
-	0x2af972e1, 0x47e039d9, 0x5b5e5c93, 0x32f7a769, 0x90a516fb, 0x92defd7f,
-	0xf875bb14, 0x43a239f8, 0x7c379c97, 0x739ed57c, 0x6653e57b, 0x3d647bf4,
-	0x897ba7f1, 0x97fcc3e0, 0x9db9ff6a, 0xeee5d902, 0xdf0f8366, 0x2c0ae153,
-	0x07d8f1e1, 0x22cf8364, 0xaa89d90c, 0xddab791d, 0x6abb5021, 0x63f6aa57,
-	0xbbe3c9c0, 0xfb788a4b, 0x556b8b65, 0xa75c58e5, 0x97179e85, 0x398ce7f3,
-	0xf55fa14f, 0x918152e0, 0x4aec501c, 0xedc34e95, 0x72fb4fce, 0x438a4712,
-	0xa7d0af3d, 0xc21367ca, 0x63d543f8, 0x7e7054cf, 0x5e3d40eb, 0xf7fc7a88,
-	0x7c3cfb1a, 0x8fe3d05c, 0x463f5257, 0x2e7e8bfd, 0xebf9233a, 0xadfc6566,
-	0x4e05feea, 0x59bc20d6, 0xfd19b02c, 0xf5fa68cc, 0x139d8a7b, 0xc519fdad,
-	0x3f1dbc7e, 0xc8e4561f, 0xcbf3f168, 0x70f2b795, 0xf9f9a9ff, 0x8c687d96,
-	0xd557bf62, 0x1ffb86bc, 0x6a04f7a7, 0x97feff90, 0xe1eee281, 0xfaa53def,
-	0xecd3229f, 0xa32ca9cf, 0xf723fd0e, 0xe83f1e1a, 0x43bfb24e, 0x7a5bcc7e,
-	0x05ace386, 0xb8ed107f, 0x51266f47, 0x32f686d9, 0x385e2b94, 0x1588f947,
-	0x77f0b46b, 0xfb174c63, 0xf3a6cbaf, 0x9eac2d03, 0x7d2d4ce2, 0x5016d249,
-	0x0f63dd0a, 0xf2be469d, 0x0fdbd01e, 0x88ffbe84, 0xc799befa, 0xfba636e1,
-	0x661af728, 0xc278b40f, 0x7dad7eed, 0x8dc4a950, 0x6f09d9a2, 0x5cb85bf4,
-	0x3e27a339, 0xd378c0ef, 0x7d8cc64c, 0x37b82e5c, 0x474938f2, 0xfc04e6df,
-	0xd2bb6a08, 0x500c457e, 0x6bf28a1c, 0xbed5eaf0, 0x3ee8d3a7, 0x27cdac97,
-	0x39ffefb5, 0xbcf0cbc9, 0x970f7252, 0xbd36ee4b, 0xa12a4792, 0x83b797ef,
-	0xed0e393f, 0x1bfdbb4b, 0x8b807788, 0xc8de48f9, 0x3ecbb89a, 0xe9f4af25,
-	0x3f257f99, 0x2891c574, 0x79eea479, 0x7ca48f3c, 0x1e787727, 0x0ca9f4e9,
-	0x48f3edfb, 0xe8e7bd1d, 0xf2edcb1e, 0x5baaa649, 0x3b8a1c71, 0x7c79144e,
-	0x209f6277, 0x626abc61, 0xe9775f1f, 0xafb238b6, 0x3ab57e1b, 0xba81e505,
-	0xe22c9f4f, 0xfde4fdf8, 0x5fb06acf, 0xc944afc9, 0xe37aeb02, 0xcb3f0dfd,
-	0xd9bb75e0, 0xc436fd8e, 0xc9f33fa3, 0x23c7d6af, 0x1280df7e, 0x17c7e7f7,
-	0xc9f1c8c4, 0x667578a1, 0x959dc515, 0xfa08b578, 0x5c50cc70, 0x8bdfbc27,
-	0x746e5c55, 0x7142bb83, 0xef3c23cd, 0x9aee9ddf, 0x9ebff547, 0x29dff8c4,
-	0xfd1e2990, 0xc635d02a, 0x62c1a68d, 0x3ffd2f31, 0xe62758e3, 0xbac7ba91,
-	0xf47c427e, 0xf23b3ad7, 0xfca7f411, 0x9db0f793, 0x6a8623f4, 0x0333cf31,
-	0xf7405b3f, 0xdf295231, 0x8fb28f73, 0xa2cfe0e9, 0x2cd0095f, 0x34f43cc1,
-	0x2333df25, 0xfe38898e, 0xfb6b830e, 0xf52fcc54, 0xc4cd8e8b, 0x3c148e04,
-	0x779e196f, 0x2f9e6412, 0x6a4ff357, 0xfe5a3cde, 0x9479c049, 0xf3f056ef,
-	0xf980b296, 0xc4cf3574, 0xf9293a96, 0x43cca5b5, 0x807c42f7, 0xde73afb3,
-	0xcffc846b, 0xf21115c3, 0x982beb3f, 0xf3699f62, 0x5f73db8d, 0xaafd3a21,
-	0x78c3c679, 0xe68ee2ae, 0x0fdcecc5, 0x28bb830d, 0xf234d3e9, 0x6ff8febb,
-	0xfb67a409, 0xbc3e906e, 0x00b13416, 0x78071fc5, 0x40cfbddc, 0xe06b8671,
-	0xd10d8dbf, 0xf054efb3, 0xd5f78f71, 0x04f7fd11, 0xfdf1e3ea, 0xb7cf2bdf,
-	0x7ee4b7bd, 0x01bdf7b4, 0xc60b1dfe, 0x13d63fb8, 0x6ed18b10, 0xf2fb83b9,
-	0xf5846564, 0x7eb8e399, 0x52a3e70a, 0xab4aff85, 0xdeeb9e38, 0x7b987ee7,
-	0x48afcf03, 0x7b705c8a, 0x74fd5e78, 0xc6a09a56, 0xca45c7d3, 0x92091cbf,
-	0x447968de, 0x7cc9efa0, 0x33cbfcd9, 0xf1f391e9, 0x462f7a2b, 0x3634bfce,
-	0x168cfc90, 0x638f0ecf, 0xff2a9dff, 0x7638f3a6, 0xeb44957a, 0xd7e4f64e,
-	0xeb43638c, 0xb0fb83bf, 0x7d845674, 0x6fe383b8, 0xf1db1d9c, 0x3b63caeb,
-	0x1e3113fe, 0xc78c7b7f, 0x6c7961ff, 0x8abaebf3, 0xdbffc2d8, 0x1fdfc318,
-	0x57fffe09, 0xe78407cf, 0x0bcfc3ff, 0x30039f84, 0x17b0f5bd, 0x9d84badb,
-	0xefc33f41, 0x24d6bf8d, 0x93141c80, 0xce7dd3f6, 0x1f3ce505, 0xecdeadb6,
-	0x9d0c2bdb, 0xf5f1501b, 0x23f73568, 0x5eebbca5, 0x04d45efc, 0x829f5039,
-	0xfe72b2f1, 0x59ae4377, 0x898c5e78, 0xc9e63a52, 0xc5f4cde0, 0x5b749760,
-	0x5359e722, 0xe9a2f195, 0x35d58391, 0xe315678b, 0x7c8a3d1f, 0x4a87ff0e,
-	0xe5ea521c, 0x6899e9f7, 0xf34c5f4f, 0x1ed1d3da, 0x9fc93c4a, 0xbc99f827,
-	0x67b2e097, 0xdc7fe62f, 0x7be11b20, 0x26ffc946, 0x1b2bbbcf, 0x60c9d2e3,
-	0xf05e6217, 0x920fcc69, 0x7bd12b3f, 0x66977cea, 0x19ea3f71, 0x9f301303,
-	0xcfca9deb, 0xdf9eb139, 0xe6a6fd91, 0xfc1acef5, 0xca055a97, 0xfc23b5eb,
-	0xf3f9d53f, 0x442b65f6, 0xebcdf80c, 0xf8df2891, 0xe5dff976, 0x9e1e68ba,
-	0xe24c7be7, 0xbf409caf, 0xec78e019, 0xefd12168, 0xffe5e38a, 0xc7fe8cd4,
-	0x3cf09164, 0xe254afcc, 0x78941705, 0x502f1a87, 0xacff5bf3, 0xc03e49c4,
-	0x03940bf8, 0x72810f18, 0x9ddd2cfb, 0x67db4fd6, 0x67ffe045, 0xf21f1e04,
-	0x87c794fe, 0x9c8e8d0a, 0x7f94f3d0, 0x63ef8b35, 0x2fe79fab, 0x0fcf78d4,
-	0x7e14f595, 0xefc7ef4f, 0x9d6e15a1, 0x5f3d446e, 0x0e2b35b8, 0x4fb219cb,
-	0x5ef80697, 0x4eb0fab6, 0x7448bfdd, 0xe75957b4, 0xca4133b6, 0x961abdef,
-	0x8b34bff7, 0xa968679f, 0x097bfbe6, 0xd418a0ff, 0x6e229b1f, 0xb131f341,
-	0xca47d24a, 0x5f80b52b, 0x76b6708c, 0x7c55b873, 0x75edf8b7, 0x53c5cf38,
-	0x1658adc1, 0xa3aec9ac, 0xf5db7bb8, 0xb9bf68ad, 0xae9c6f07, 0xd19978a6,
-	0x43c4fe8e, 0xdbb8da03, 0xfe3cd513, 0xe01a2afe, 0x457bb788, 0xef0b8ff2,
-	0x927e8915, 0xbfe42c5b, 0xde981b26, 0xdc45f58a, 0x4c682a2e, 0x5b3ac3ad,
-	0x60f64492, 0xd27b19c1, 0x714379c3, 0x377be4b0, 0xdd3c458c, 0xc6aacf2e,
-	0xe45b2ed3, 0x5f9fb8e3, 0x7edacf35, 0x6f3a3df6, 0xc54baeaa, 0x8d2f9a8b,
-	0xcf556796, 0x3f1bb83d, 0x70d39cd3, 0x8c06c18b, 0xbd1e163f, 0x5fce5468,
-	0xa1ecb64a, 0x91e16c3c, 0x557f94eb, 0xcf6eadf3, 0xa1abb275, 0xf7fb119f,
-	0xd7f9e26c, 0x2c0e00d7, 0xb2dd617b, 0xdba1ef09, 0x7583eca8, 0x9b63f3e3,
-	0x6ff4a972, 0x7c795072, 0xf8951953, 0x64f4c999, 0xa75edbcc, 0x59d5edbc,
-	0x524dcec3, 0xe8b76f5e, 0x15f108fc, 0x7aa3f792, 0x1f4fde78, 0xee35e3c7,
-	0xbefa0633, 0x99acfba1, 0x5f4d77e4, 0x0ff444eb, 0x9ae73f3e, 0x60777088,
-	0x2e842dde, 0x961d913e, 0x9d83f424, 0xdbe60b0e, 0x1aaffb0a, 0x874c3cf1,
-	0x3c623018, 0xc0cf200c, 0x9eee8b23, 0x6fdcfceb, 0xf1058d5f, 0x58fcdb7b,
-	0x8fcfffef, 0x58fc957d, 0x273f3577, 0x0291caad, 0x8bde4ea7, 0xf2d919e5,
-	0xd89c8870, 0x94f9e4e6, 0x1127936d, 0x4e76ee1f, 0x321d5a4a, 0x8f23675e,
-	0x3bdf245f, 0xfcfa12d9, 0x1f3cd597, 0x67302c96, 0x33567924, 0xc7ddebfb,
-	0xd76e411b, 0x3ffbb244, 0xe5d029f9, 0x238ba04c, 0x90389edf, 0x343f19c7,
-	0x71adb71e, 0x2831c4f5, 0xd8982e9f, 0xd3af1e14, 0x5858e3c4, 0x5c5a2e5e,
-	0x4ea3456e, 0xa179d0b6, 0xdbd404e0, 0x2633f1e1, 0xbd702706, 0xbde0672e,
-	0x83319814, 0xf961b195, 0xdf305fb9, 0xfbc327cf, 0xa4751acb, 0x5d3cd42f,
-	0x36c8a341, 0x6c167d01, 0x3f28f834, 0xa45e28d7, 0xec6fc576, 0x90320a94,
-	0x6b383fce, 0x16ae3094, 0x34731f1e, 0x049eefee, 0x026d1dfd, 0x5dba0bdd,
-	0x073d4f1e, 0x3fdbd2de, 0xf96de307, 0x3d77576c, 0xac9fcff4, 0xf4fcf093,
-	0x3f1e7cf0, 0xd8a05dff, 0x3671e139, 0x4bb433a4, 0x1bf0e3c2, 0x38d83a15,
-	0xd7adeb9b, 0x1d537f14, 0x4e17ed47, 0xcd9d3f3f, 0xb8b46df5, 0xbc6551fe,
-	0x6d82c6ce, 0x177f7193, 0x93ea18e8, 0xf35ac6ce, 0x76f190e4, 0xdbe7e6cc,
-	0x60fcc19e, 0x907e686a, 0xf3c301e7, 0x2b9caa82, 0x037dffec, 0xc8377be2,
-	0x6e63d46b, 0x141fcf1b, 0x8339ab1e, 0x4e086372, 0xc377b7ae, 0xbec8079e,
-	0xbe312473, 0x457bfa2e, 0xc502a3de, 0x7c160ae7, 0xea1e3c76, 0xf74499cc,
-	0x2767dcb0, 0x3ca2b16f, 0xe316205a, 0x53b71ebd, 0xc26795b8, 0xeffdd27c,
-	0xbcefa1ac, 0x7f903e16, 0x81e5f70e, 0x0f9d0366, 0xfddef554, 0xf03534ef,
-	0xc64fbdf6, 0xe0ae7b61, 0x79f1d8b0, 0x763f7d23, 0xfa7e4bfe, 0x110b58bb,
-	0x81e7903a, 0xe44497b3, 0xd716cb9b, 0x151f23df, 0x4cf2522e, 0x3f4f5ccd,
-	0xc0c8b7d0, 0xead3cec8, 0x9f5913cd, 0x46e83c53, 0x8fe5215f, 0x43fcf052,
-	0x29be90de, 0x6c7a0a3c, 0x63d39dcc, 0x112d9d3f, 0x1e82673e, 0x17927843,
-	0xf87d3cf1, 0xf650effe, 0x8a5e9a3f, 0xff518726, 0xde63fbf0, 0x5c36c10c,
-	0xee31db8f, 0x3af68a53, 0xd3a2e394, 0x71661fdf, 0x628a4eba, 0xa149fdcf,
-	0xa7e7a8df, 0xcf27477a, 0x7fd987f4, 0xd563791e, 0x4df352ff, 0xa0f6bfaa,
-	0x65ab0f62, 0xbbfe5293, 0x72a037ef, 0x21bf788d, 0x86fdf239, 0x68090e87,
-	0x1bf7a8a7, 0xcd59194e, 0x4f3c54e1, 0xf277dcab, 0xe93b222d, 0x62fcdfd4,
-	0x78a98beb, 0x509049df, 0x3a1fb51d, 0x1dbe7a47, 0xa7b223ec, 0xe3cb7efa,
-	0xf9f887ad, 0xc8def6f0, 0xaddbdddf, 0x32f5dfd8, 0xaed1b923, 0xe86db79c,
-	0xb744f251, 0x8b8f96e2, 0xb74b71a1, 0x3d56303d, 0x7f23ebc7, 0x8cc71b4f,
-	0x60ecb716, 0xdbb73a41, 0xa07046b1, 0x39ddb87e, 0x79ca5ddc, 0x4c71a8dd,
-	0xb973e479, 0xb94c71e1, 0xb9c79b5a, 0xf7c4966f, 0x680825db, 0xce759aef,
-	0x7fb73a36, 0x9d22904c, 0xcd5a5ef3, 0x257cf4e5, 0xc8d0720f, 0x8560e3e9,
-	0xf06ff740, 0xfbee1e1e, 0x1efc63c1, 0x7e02c1ce, 0x7bcd470f, 0xa66bf7a8,
-	0xe83de50e, 0x2f7a9dfe, 0xc367bd47, 0x5ae08f98, 0x7d1c5cf4, 0xe1876bc7,
-	0xbddb8d90, 0x1a3f7e5e, 0x43e61065, 0x8913cc4d, 0x6bab6b5f, 0xef7a6ac4,
-	0x8f4fdb8e, 0x7bf04754, 0xe91f8a7d, 0x2fea8eae, 0xfad6afac, 0xf70f540b,
-	0xde54ee17, 0xecd98be3, 0x87fbfb4e, 0x9e8f1c63, 0xf1b63b32, 0xfb48ecc4,
-	0xfda2c5b6, 0x5e5aaf1e, 0xb0dfe456, 0xbb0dc5ef, 0x7af5c92f, 0xa7ff60b7,
-	0x1ba7ca4a, 0xcaae9f28, 0x7c31eed5, 0xe3291ffc, 0x294065a9, 0xd77ca3bb,
-	0xbc4a97f9, 0x7b944bac, 0x2f69ee10, 0xd397e368, 0x97e3690f, 0x35937b33,
-	0x78ff7cf5, 0x6785fbcd, 0x8bda6926, 0xda68f703, 0x68142f4b, 0x1503e5ea,
-	0xaf2bf79a, 0xb3ea6ad4, 0x65f8da82, 0x61c5cdf5, 0xb47d38f7, 0xdca01abe,
-	0xe6757ed0, 0xcbde6a6f, 0x575da358, 0xaebb4796, 0xebb51b89, 0xf6cdc752,
-	0xd397d76a, 0x325f5dad, 0xbef2e3e6, 0x7f2e3e7e, 0xc7c95db6, 0xdfb058e5,
-	0x2d938d33, 0xf7a9b768, 0xfef7d5a9, 0x5866372f, 0x007f40df, 0x00000000
-};
-
-static const u32 csem_int_table_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0xe4b3ff00, 0x51f86066, 0xb97bc10f, 0x726e1818,
-	0x0143f821, 0xd08667cf, 0x0c0c2c6a, 0xc6cc401a, 0xcec0c0c4, 0x717ebc44,
-	0x1d7b044e, 0x4cc30307, 0x31c8de20, 0x481afef0, 0x7e879d7c, 0x42f3a976,
-	0x81c15968, 0x570837f7, 0xb430310a, 0xc430330a, 0x0cf84088, 0x55f2a8a2,
-	0xa9b60842, 0x39766524, 0x0003f502, 0x3471cc24, 0x00000380
-};
-
-static const u32 csem_pram_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xd554780b, 0x733ef0b5, 0x7993331e,
-	0x0f20f264, 0x0084f102, 0x021842a2, 0x27088784, 0x01a8c421, 0x54bc8083,
-	0x48433c26, 0xbfa81132, 0x2677bd6d, 0xb5ad1104, 0xbc1b6951, 0x14101de8,
-	0xd1a07515, 0x40e81c06, 0xdbdab114, 0xd5a8f8a8, 0x40445076, 0x8bcbc248,
-	0xaf7fd52d, 0xe649cfb5, 0xd4484c9c, 0xffffbff6, 0xdbf3f1fd, 0xd9cfb3ec,
-	0xdaf5ed7b, 0xf6bdad6b, 0x9a32c11e, 0xe4224e24, 0x65a3f85b, 0xf4842784,
-	0x0adb2ce9, 0x64918fda, 0x8b2ffc42, 0x108e36f2, 0xf08e77ee, 0xbc8451a4,
-	0x980b99b5, 0xcfbc3d69, 0x9fad0846, 0x603d34de, 0xff6422ce, 0xef02b308,
-	0x8f9ade9f, 0xbd2fc9f5, 0x7b6814e7, 0x00bc4bd5, 0x13bed375, 0x109d88ce,
-	0xa1e5b9af, 0xf6f3e96b, 0x85b27897, 0x93fc450e, 0x9085244d, 0xfec21663,
-	0x52fab22e, 0x6d56ab2b, 0xf4077fde, 0x2664de5b, 0xd54fda56, 0xaed365ee,
-	0x8765f5a5, 0x54af0244, 0xfa95ab6d, 0x00f2fad2, 0x9afa8417, 0x71c67f7d,
-	0x79480ada, 0x27212870, 0x5f22167d, 0x96ceeb49, 0x79f45994, 0x11676045,
-	0x83b15fbc, 0xfbe89b73, 0x7ff69b15, 0x3457fd0c, 0xda79038a, 0x36ed8aff,
-	0x63610f22, 0x1e604b7f, 0xbc01a64b, 0xc4886f55, 0x97e5eb4c, 0x70044956,
-	0xa54bd424, 0x61ff180e, 0x38c07649, 0x0d1c7087, 0xd0cf559f, 0xd577e871,
-	0x986e702f, 0x7889b55a, 0xddd69e00, 0xda4f39d6, 0xd2b55e61, 0xf77ef860,
-	0xb7bc127d, 0xb2f6502c, 0x36f80655, 0xe700454b, 0xd2d2cda6, 0xadfd9da1,
-	0x0ea6fed8, 0xd90d63ae, 0x76a89ea9, 0x47d27963, 0xacee6c88, 0x04a21057,
-	0x407700ed, 0xf3ac3e9a, 0x812e79f9, 0x3fd0d190, 0x674b644f, 0xc83094ff,
-	0xe8f7fe07, 0xf60f813f, 0xb2db023a, 0xd2b5e93a, 0x772dff45, 0x4bacebd2,
-	0x9ed09fa5, 0x56bfdd17, 0xa074043e, 0x5cfbd4f0, 0x4be23e58, 0x4f8372c3,
-	0xcafdbc46, 0x06cb0437, 0x3f9f1b9f, 0xe58b1be6, 0xe5829f26, 0x2c62be13,
-	0x7c52be03, 0x0e6f8b6f, 0x1e7d5b96, 0xaf94fe7c, 0xbeedcb1c, 0xacfe7c1a,
-	0x772c6eef, 0xfcf8fcf8, 0x2c7adf05, 0x2c7abe83, 0xb01af977, 0xf005f46c,
-	0xdb7d97bd, 0x05f26cb1, 0x5f1ef9f1, 0x5f219613, 0x407dcb18, 0x7d865a5f,
-	0xf01e582d, 0xabe5887d, 0x777e08be, 0xcb1c77d0, 0x3bbc5507, 0x817c9027,
-	0x10a9cde2, 0x92171517, 0x8be4a258, 0xca589eb4, 0xf9b729ea, 0x4f5a25f3,
-	0xc53ad0f1, 0x70cadf63, 0xfbd699be, 0xccf6b0d6, 0x8581487b, 0xacfd33d6,
-	0x4a83c07d, 0x07d69581, 0xc1f6b3d4, 0x7105fc9b, 0xc0383eb4, 0x11deafda,
-	0xfad1b02e, 0x9ed641d5, 0xed932213, 0x66139eb4, 0x94b7dcf5, 0xcf5a0ec9,
-	0xbcf5616d, 0x9d93fd8f, 0x61179eb4, 0x153f8fdf, 0xeb4f1c9e, 0xfb59dbe3,
-	0xd0a44bc4, 0x0913eb45, 0x7b02f587, 0xad02617e, 0xbd58b817, 0x20995fa8,
-	0x7dbfe0c7, 0xa1116462, 0x7fddb0bc, 0xd3a422b3, 0x455914ba, 0xfe9f14dc,
-	0x8b0f5839, 0xbfb43164, 0x84532fe5, 0x912eb471, 0x17fed0d5, 0x1fb6057f,
-	0x6f6c6510, 0xf6c2aff7, 0xed8c9203, 0xb07bdaa6, 0x60a8aafe, 0xbded727b,
-	0x92abfef8, 0x6b83ed82, 0x41fac21f, 0x63ed83d1, 0xef8d7f6b, 0xd83c941f,
-	0x80dac8fe, 0xffeb4852, 0x00b679c1, 0x9e71d75f, 0xfc0d9272, 0xa52b4c1a,
-	0x238ebafc, 0x1e3e4073, 0xf2a6a600, 0x525d2eb0, 0xfbedbf40, 0x3c93de47,
-	0x3276f2a7, 0xf53e97d4, 0xf3f61640, 0xd223f61c, 0xfb9ef87e, 0x58cdf899,
-	0xbf133f5d, 0x69fad729, 0xaceaf784, 0xdf67ebbd, 0xf0f5e337, 0xf5a1537c,
-	0x71fb17b3, 0x135e6ef4, 0x87a09dbf, 0xad4adbe7, 0x4fd8839f, 0x09e0ef42,
-	0xfd74638b, 0x5a65c584, 0x7ec47f3f, 0x1e0ef4fa, 0xeba71a45, 0x6b969147,
-	0xfd887cfd, 0x9faef7a4, 0x1ead74b0, 0xd685691e, 0xa7ec11cf, 0xa5e6ef7f,
-	0xc3d3af98, 0xfad2ae63, 0xcf748939, 0x073f5dea, 0x1cfc7a1c, 0xe7e07470,
-	0xa833c21c, 0x702af377, 0xe053f1ea, 0x25cfc0ec, 0xdeaae7ec, 0xa9c073f5,
-	0x6701cfc7, 0x0e447e07, 0x77ac35e6, 0xd7882af3, 0xbe20a7e3, 0x0e4e3f03,
-	0x3bd119e0, 0xa3ed5e78, 0x7dabcfc7, 0x8a93f03a, 0x1dee8cf0, 0x7a29853c,
-	0x74a614fc, 0x784647e0, 0x9faef5c6, 0xf8f45357, 0x03a53579, 0x3f61573f,
-	0x5e6ef5d7, 0xfc7aa985, 0xe076a614, 0xc9fb1727, 0x78476cf7, 0xd1c7ed08,
-	0xfb073f7d, 0xb073f1eb, 0xae7e077f, 0xd0a67ec5, 0xee7bb27e, 0x8f5328a7,
-	0x0ecca29f, 0x9e2214fc, 0x3f5de86f, 0xf8f53307, 0x81d99839, 0xcfd8a99f,
-	0xabcdded4, 0x7e3d0ae8, 0xf860ae8a, 0xc08c2499, 0x9dae8675, 0x727e9e6e,
-	0x857cbf7d, 0x2ef3efa3, 0x6e5de756, 0xaf0f7602, 0x45a433d9, 0xf6fbe9e1,
-	0x0fb9091d, 0xa6bb6890, 0x8fc076e0, 0xd1795a83, 0xd8fc4d76, 0x951d9d38,
-	0xeaea24a0, 0x757dc549, 0x1d29f7ef, 0x9d4f6ba0, 0x3daeb573, 0xabab93dd,
-	0xd78f9467, 0xa6bfdfbd, 0xe2bf5740, 0xef751bee, 0xd16ff967, 0xcfd7b3d5,
-	0xa83fbdd3, 0xfdaea17e, 0x5d0a86ca, 0x958155fb, 0xdb35faba, 0x7f7ba27f,
-	0xae8d7058, 0x03d3787d, 0xe111f6ba, 0x91f57447, 0xbdd31e87, 0x8b65ba3f,
-	0x87cc7dae, 0xc7daeacf, 0xeae97645, 0xa3df1ed7, 0xf6baff7b, 0xa4faba03,
-	0xbdd7bf8b, 0xd5de4f9f, 0x3f96dbdb, 0xe29fdeeb, 0x7ed74cfa, 0x0697da7d,
-	0x3aeed53b, 0xe75a8d76, 0xfa08ae41, 0x0974fe25, 0x43b0d5ed, 0xd7d4bac2,
-	0xc714fcce, 0xe528f952, 0x22c0e91f, 0x92f91939, 0x21bb51fe, 0x95f96fbf,
-	0xaefcfa11, 0x5d2b9ef1, 0x925df9f4, 0x862bb867, 0x8df9437d, 0xca506923,
-	0xed8d2826, 0xdf8c89f7, 0x0d2e320b, 0xf7bf423e, 0x2707da9a, 0x3e70fad0,
-	0xf1f2083f, 0xbb426732, 0x35278e3a, 0x999c5ef0, 0x5f74dfa0, 0xfe93de56,
-	0xdf587928, 0x5c19da9f, 0x45ebbf67, 0x51da1a4f, 0xc1f89fb5, 0x9fd759ce,
-	0x212fabce, 0x849f70af, 0xf7e903fd, 0x79a697fd, 0x89667f68, 0xe3d119fa,
-	0xa1fc744b, 0xe4187e38, 0x3f8c20e1, 0xe6f8ebba, 0xe3756301, 0x75cb325b,
-	0x3a245be3, 0xdf908bbe, 0x8eae7ed7, 0x9e30894f, 0xcfb93790, 0x66737c71,
-	0x9f7f8e39, 0xe8aefd44, 0xc63ae3f1, 0xbff9816f, 0x07fcdddf, 0x3fcfd78c,
-	0x7f3f42b3, 0xa3ffcd89, 0xf8ead3da, 0x3fff3871, 0xfcd9a773, 0xfcd82b33,
-	0x8edfaccd, 0xf81d9df1, 0xc7f8c08f, 0x9cdf19ba, 0xff3f413d, 0xf3f52a2b,
-	0x4ff1b337, 0xc7505ed6, 0x5ff8e3b7, 0xfcd81772, 0xf1c4a8af, 0x0dc7b325,
-	0xc46523fc, 0xf8e804d5, 0x7c551fa4, 0x742ec0a9, 0x2487281c, 0x6421a152,
-	0xe100371b, 0xf18e2bb8, 0x947157db, 0xf99f50df, 0x500939f1, 0xfd4799cd,
-	0x57d79546, 0x4097c8ec, 0xf53b61ef, 0xa0a896b7, 0x91e26e2e, 0x7306c9bf,
-	0xb7851060, 0x43f789b5, 0xeb86f17d, 0xbd5fa002, 0x14a0b266, 0x184813be,
-	0xcbfe7f9e, 0xe7a25b61, 0xd4972c65, 0x5122c78b, 0x07e1d6f2, 0x35219016,
-	0xc029be14, 0xeb3ba304, 0x0e3f529f, 0xa98fe31c, 0xffa843df, 0xc6c899f3,
-	0xf7f50bfb, 0xfea11ea0, 0xa4ce3a1e, 0xdda3bf16, 0xf0a34e1d, 0x7ff0aa97,
-	0xfd79302a, 0xe02e36f4, 0xd5f9f2a7, 0x7fa0478f, 0x1b6ee0bd, 0x1c277a45,
-	0x5d24fe65, 0x0fcbce9d, 0x6ddf6a74, 0x10e16c0e, 0x6be032bf, 0x21268a3a,
-	0x5067d68b, 0xffbe775c, 0x07a9bec1, 0xb7212739, 0xa54c4512, 0x9abedfef,
-	0xe3a2efeb, 0xb9cc52ce, 0x32521d6c, 0x24d7284c, 0x909634c3, 0x88471a5b,
-	0x5d3207b4, 0x448d3f11, 0x58a33b8d, 0xaa559f5f, 0x8a8ab7af, 0xb570a268,
-	0x66c8e74e, 0x39ecefda, 0x9c6d76fa, 0x4644a681, 0x52bc7567, 0xfa74938a,
-	0xb9943668, 0x7485d8f0, 0xdf62e39e, 0x1778f06a, 0x7e8c2489, 0x010fbfbc,
-	0xf193faba, 0x362e79bd, 0x73bc236f, 0x4a528b44, 0x8ca739e7, 0x1b7f000f,
-	0x9f68ffe1, 0xd0e5314d, 0x22a3fd72, 0x8f9d7531, 0x1eb9fe11, 0x22827ce3,
-	0xcbf3f3ac, 0xdf19cf8d, 0xffe9531c, 0x2d07f029, 0xa0fe00bf, 0xf9551ff0,
-	0x32af53a3, 0x3d9af0fe, 0xda1f80d3, 0xe904f237, 0xadcbf2aa, 0xa92cbf2a,
-	0x2105f3d7, 0xb8e8111e, 0xfb970e6c, 0xcc1f1440, 0x5960f956, 0x6e6f9e83,
-	0x3d317e27, 0x6ee65d06, 0x9a6f7cd8, 0x9f7e75dc, 0xff337ca8, 0x9f88fdc1,
-	0x7464f3ae, 0xd3a543ba, 0xf6fa35ed, 0xdeba555b, 0x4e75d2ae, 0x51afc3c3,
-	0xc9e641f5, 0xdde41101, 0x9e8d53fb, 0x3d3d1d11, 0x708d3d2a, 0xf3d2a1de,
-	0x7a331f8e, 0xa88de11a, 0x9c348cf4, 0xae80c913, 0x5be11af0, 0xf9977770,
-	0xccab5c60, 0xde9e9b1f, 0x4755fca6, 0x05579ea3, 0x3475586f, 0x6c56ce4a,
-	0x2fabae9f, 0xbdd5cc0f, 0x4ca1acbf, 0x7ea4bed7, 0xd17daeb9, 0xf5753bfa,
-	0x758fff32, 0xbbb82fef, 0x7b7ed756, 0xf6bafdcd, 0xeb0fe5f9, 0x1b3d73ea,
-	0x9ecfef75, 0x3ed759b3, 0x5d19f4ab, 0x9de28cfb, 0x6574faba, 0xd37deeb7,
-	0x066eabbe, 0x3deb7cfe, 0x713d809e, 0xc605fdc1, 0x45b82f33, 0xd473bc37,
-	0x1f5f2327, 0xf2c10df3, 0x7c8dcfb8, 0x1637d27f, 0x66a6d6cb, 0x7413ac3b,
-	0x124a5c5d, 0xcd326908, 0x0fdf5dab, 0xeb8269d6, 0xa9e4c869, 0xb37ad3f5,
-	0x28794649, 0x78489069, 0x2c1c2124, 0xed1c2a36, 0xa47b547c, 0xaa06f687,
-	0xb6ba93f8, 0x3f624497, 0x76523ef7, 0x7765f005, 0xcbfd03eb, 0x4da7bb00,
-	0xed8debb5, 0x8d291c95, 0x1ac84e7e, 0x626ac384, 0xc4a54776, 0x5772bfe4,
-	0x4271017a, 0xe6b83c3d, 0x2905e372, 0x9f02a793, 0x78e4eb64, 0x3a35c359,
-	0x9a204efd, 0x6df807dc, 0x8af9eea4, 0xbeead7ed, 0x479fb53b, 0x5741abb8,
-	0xb165838c, 0xe81333f4, 0xe67370e1, 0xa700618c, 0x4deb1472, 0x3c2ed07d,
-	0x755e2be5, 0xafd01074, 0xbee3cb14, 0xf31e5839, 0xea3cb079, 0x53f2c72b,
-	0x11960d5f, 0xfe58dddf, 0xf2c7e7c5, 0x2c7adf63, 0x63d5f23f, 0x01afa1f9,
-	0x017df7cb, 0xb6fb0f2c, 0x2f8ef963, 0xaf8b6588, 0x9f56cb09, 0x7726a582,
-	0x71ddf13d, 0x093e1d75, 0xcf8317fc, 0xed7f3aa4, 0x7c9d09fa, 0x87dfc716,
-	0xb9e1a67c, 0xf2acc1a4, 0x1f8e8a43, 0x4397c012, 0xbda1eb3e, 0xb0f95441,
-	0xb763efbb, 0x6bfcb77b, 0x0fea6df8, 0x7e4eb7e4, 0x53f030ca, 0x34fc4f76,
-	0xa7e28f8c, 0xb31726a9, 0xfa7e547b, 0x8623cc19, 0x8c0f315f, 0xf6513e90,
-	0x826f929a, 0xbaa56c75, 0x601f420f, 0x763aacfd, 0x05b77d1d, 0x10c0baed,
-	0x0ece3758, 0xd860dbf9, 0x21fb3847, 0xf7567e25, 0x49f233f3, 0xd05778f7,
-	0xa01a59bf, 0xdaea4f44, 0x78638d6e, 0x31489ab5, 0xfddaeba1, 0x2f729e83,
-	0x81758a1c, 0x01f7c224, 0x8c4774f7, 0x0cada97e, 0xaf09edf8, 0x72af8e75,
-	0x8f63bfa0, 0xca0f3dfd, 0x2f6626a9, 0x68f335c7, 0x93f093b7, 0xc76fc06e,
-	0xa77664ba, 0x7dbdbc41, 0xbb42e490, 0xe3d64c81, 0xc3a05fcf, 0x4714fddf,
-	0xd6eeb82d, 0x06fe21a7, 0xbd38357e, 0x49ebf817, 0xcf84f7bf, 0x7fef3085,
-	0xd27b3e01, 0x45e93d8f, 0x342fc8a2, 0xedb7f9d1, 0x80fb961b, 0x1e5ee30c,
-	0x9afedadf, 0x7e5f9e11, 0x4b6e3e47, 0x25b8f8d1, 0xa41f8093, 0xc6d9cbca,
-	0x2e81e32b, 0x40f4fd1d, 0x9f77ee4f, 0x7eff8264, 0xdfdf4b3a, 0xe2fec67d,
-	0xa70dc225, 0x89243ae3, 0x92bf53c4, 0xd1e36cf7, 0xfc47719f, 0x67d83710,
-	0xe0c9d773, 0xaffc9e37, 0xeb3d0cb0, 0x0f670be3, 0x3f04e93d, 0x5f1a656c,
-	0x1d063473, 0x982ab2b5, 0xf68f6355, 0xf5f49a57, 0x715cf5b3, 0xc725e710,
-	0xeb061ccf, 0xa8e6ab8c, 0x0d3f7a08, 0x959fad4b, 0x738e1269, 0x3c767b72,
-	0x4c02fff3, 0x4048ec9f, 0x67d2737d, 0xd9fff7c1, 0x8fd774f0, 0x8d210f06,
-	0xe80b33e4, 0xdd96da73, 0xcaddfbfd, 0x825e7083, 0x890929f8, 0x69bf815f,
-	0x3b7fffa5, 0xb015fa00, 0x0debf5ae, 0x70f37ef2, 0x3743be78, 0xd64efd1e,
-	0xbbe18cf6, 0x204ee5ee, 0xa7be34c7, 0xbaabfbf4, 0xbb62bdbf, 0xc76f46b5,
-	0xdeeae826, 0x9d1af4a6, 0x00ff0b5d, 0x1386bdc3, 0x54ab0960, 0xb04db0d9,
-	0xda7e07af, 0xf049c103, 0x5ef6385f, 0x79222595, 0x16971464, 0x6385d3e0,
-	0x6797fe35, 0xa9ea99ff, 0x048a6f13, 0xa25c8ce4, 0xaea9e550, 0x899bf220,
-	0x917d6898, 0xc6c2f6fa, 0x6eb02515, 0x26f9789d, 0x931643f4, 0xc7f82752,
-	0x0f3ea4e5, 0x89a7b5e2, 0xf3e418a9, 0x39c77934, 0xad1e4a32, 0x2e9d8482,
-	0xe3b7af5a, 0xabaf7fa9, 0xd7d06b2f, 0x525b9297, 0xe97edf60, 0x38049106,
-	0xf6fa1bd0, 0xf61779af, 0xacd48cbb, 0x57fb7583, 0xa16bbc6a, 0x5419088b,
-	0xf6fd556f, 0x0a32bcf1, 0x71604b87, 0x7a1f6d16, 0x7ff32279, 0x2406662a,
-	0x59ffbe85, 0xa95bc8e3, 0x07dfa206, 0xbc7ec1d6, 0x6f713a7f, 0xf7e95d23,
-	0xc237e15d, 0x5d03d9ab, 0x3855c3f6, 0x4a73b792, 0xcb1e8620, 0x67263814,
-	0x102bbeaa, 0xc7b8ba5c, 0x7bfd4334, 0xd13253f3, 0xde1ed3f1, 0x668c2793,
-	0xc0fc03fc, 0xe792ed09, 0xd69ff487, 0x7f82ffa5, 0x68fdff6a, 0xfeba79ff,
-	0xfb53fda7, 0xfe05d81f, 0xaffab179, 0x2ff3edfa, 0xa93ea9fb, 0x4e97f178,
-	0x13c9d742, 0x9b8a7d42, 0xdb72b5d2, 0x96854ebd, 0x13bf05c7, 0x8044f5f8,
-	0xef458e2f, 0x154e0587, 0x41cec542, 0x49fe0ddc, 0xecf93ffb, 0xf11e30cf,
-	0x85d136d5, 0xe6edb4f1, 0x61ca99b0, 0x12f2e375, 0x23f58392, 0x19df7eac,
-	0x7a4dea1e, 0xfa78abfe, 0x1f902997, 0x8d453942, 0x9ed1852f, 0x79fadead,
-	0x5e4fac11, 0x64728ed2, 0xbfc60efc, 0xaffa8898, 0xdaef8a4c, 0x38c4e14e,
-	0x8bc55781, 0x6767f1b7, 0x37942778, 0x82fa017c, 0xc7e8227a, 0x572bbf1b,
-	0x8235d4ed, 0x8d98f923, 0x190c7bfe, 0xc3517a03, 0x3b30090b, 0x5f99eeb5,
-	0x70a11ce7, 0xa6fada9d, 0x97c28b93, 0x83674f26, 0x8f73fe8b, 0x6ddebddc,
-	0x6d16f2a5, 0x96eb690f, 0xd7daa4dc, 0x8a565621, 0xf3e42761, 0xdd166e54,
-	0xf2b8fa7e, 0x7a9f27f9, 0x7f99e20c, 0xd107bb32, 0xff3c57fe, 0x69e3fbda,
-	0x314ec57d, 0xc34d84b9, 0xd274a5ce, 0xbfff4bc7, 0x1e93b73b, 0x4d79bf15,
-	0xe7b18792, 0xd27624f7, 0xfdcec565, 0x15d61912, 0xfb83931f, 0x063d88a5,
-	0x8a47827d, 0x7ba85ec0, 0x8825bfe6, 0xc7d89e33, 0x18acd491, 0x1afcdcf8,
-	0x278003da, 0xaf4aa7a4, 0xde19fa0e, 0x80ba52f7, 0xcbd236de, 0x5522def8,
-	0x90bf40bf, 0xfbf94167, 0x07903d85, 0x0dd991f5, 0x617f2878, 0xf3e61395,
-	0xf8c35085, 0x537bf1fc, 0x8b959f40, 0x961714fe, 0x13f979ec, 0x5bfe423f,
-	0x528ff6f6, 0x9444be30, 0x45ae1374, 0xe79874fe, 0x70b34d92, 0x07894b9e,
-	0x71fcb0f9, 0xcb4034be, 0xde29020b, 0xac4e4319, 0x2f939322, 0xd2e250b6,
-	0xfe017e79, 0x77efe824, 0xb436c0f8, 0xa024efbb, 0xcea47e0f, 0x580c5a85,
-	0xf46160bf, 0x2ebaabfa, 0xa33eb010, 0x7deb77f9, 0x93a7402d, 0xd85495fd,
-	0xc112f177, 0xfb83e2af, 0xbfcbf696, 0xd195253d, 0x9e42c889, 0xf75d1dfa,
-	0x7873c327, 0xac5445bf, 0xc8efba39, 0xe39d59b7, 0xa7c756af, 0x7ac1c770,
-	0x6c4a45fd, 0xd44f35fb, 0xb75d00f4, 0x4a2cf8a3, 0x6ffc99de, 0xbbc99fbd,
-	0xe981ff26, 0xfe7ed0c5, 0xf8239330, 0x0a43d60e, 0xdb153857, 0x50e4cff7,
-	0x3a3f503f, 0x156f9c96, 0xb7d73955, 0xc285f91b, 0x51f1702f, 0x24e3037c,
-	0xdf701d22, 0xfa06e965, 0xf51e947d, 0xaeceb8c2, 0xbc726afd, 0x455bf34c,
-	0x9b203ebd, 0xdee81e98, 0x9e23f2ae, 0x53c0c52a, 0x52fc818f, 0x20cbf579,
-	0xcc2962bf, 0xcd1dcbff, 0x72a3cfef, 0x935065fb, 0x355ebd5b, 0xaef96dca,
-	0xdc9624d1, 0x9377697e, 0x9f4b7298, 0x7b5b94c7, 0xfff9f904, 0xf0d55eb4,
-	0x78f00c38, 0x351e274d, 0x3e1dd93d, 0x90f27a8d, 0x8d5e2320, 0x1dfe927a,
-	0xf95d7926, 0x8d43e351, 0xab9e2aff, 0x51f402ba, 0x7c6a9f07, 0x1aa7c1d8,
-	0xef89761f, 0x6c68f0ea, 0x34fb00bf, 0x96f9ae14, 0x528ed38d, 0x4ed2d257,
-	0x7f26df70, 0xaafb8f26, 0xe584f396, 0xf3111081, 0xd5303f43, 0x753b068c,
-	0x3d6fdfe2, 0x7785177d, 0x2c8bf13e, 0x445ea02f, 0xb7d2ffbb, 0xf3a04edf,
-	0x79e2a799, 0x54fb453e, 0x0239974a, 0x70a38e17, 0x3f8815ce, 0xb7e2113e,
-	0x0a34f91c, 0xfae5f98e, 0x4c4dfc3a, 0xa7a7ece9, 0x9fabbff7, 0xb7cb7df2,
-	0x1d3f5d29, 0x50bbc844, 0x10bc388a, 0x81d357cd, 0xde7f14ae, 0x00605c51,
-	0x5088a9ea, 0xbd77e51a, 0xf3fb3220, 0xa319c2ed, 0x9fc9bec1, 0xf19e2c3d,
-	0x7bf460fb, 0x3b3eaabd, 0x41e397eb, 0x650d9fcf, 0xf67b7fa3, 0xac4722d0,
-	0x9566d0bc, 0xf7535ecf, 0x5cecda5d, 0xbff94f3d, 0x7da3b48d, 0xc95bb7e3,
-	0x82fb18b6, 0x5f4d451b, 0x7fa374ab, 0x8e7f1d3c, 0xe97387ca, 0x51b9f1a7,
-	0xf5399b74, 0x4aece084, 0x34fbf807, 0xa1fb0fca, 0x06be05f8, 0x235b36fc,
-	0xe231a545, 0xf8a9cf79, 0x6be0789b, 0x0c2dcfcc, 0xc7800be5, 0x8baf3b42,
-	0xc9a93c83, 0x143250eb, 0x60789ae0, 0x5347cff9, 0xe21ef63e, 0xeb8f90dd,
-	0x3c919d0d, 0x2361fc31, 0xb07fa13e, 0x2e888f33, 0x627bd7c4, 0xebc012e9,
-	0x04acb37b, 0x95df35f6, 0xe0b155dc, 0xf5b3332c, 0xbd292e66, 0xbffb8a30,
-	0xb3f9bf0f, 0x8a02e11d, 0x9676b38f, 0xff95ddf7, 0x759fdc98, 0x0e5a8171,
-	0xf56790f8, 0x71002e64, 0xf9e222b4, 0xe50e04f9, 0xfeb4527d, 0xfe9a6fca,
-	0x54f5e43c, 0x89973887, 0x110b57b6, 0xdbd8f809, 0xfb0053b4, 0x289926fd,
-	0x6a108f18, 0x8a8ccd86, 0x05111d7b, 0xdff357c4, 0xf80edde6, 0x4cd3373d,
-	0xe8652e00, 0x01d82719, 0x512342e7, 0xd79bba0e, 0x5a647c1f, 0x10fd08a1,
-	0x3f230fe4, 0x74db2514, 0x499359f5, 0xdba5373f, 0x95647344, 0xeafd063b,
-	0xbd67c624, 0xff966fd6, 0x04dbf4cf, 0x5f18dfaa, 0xedfad18b, 0x7df18926,
-	0x8d4b7e94, 0xd656dfa5, 0x17c0a9ca, 0xa766f72b, 0xbe575d02, 0x2c4fa4b1,
-	0x8fbaf6fd, 0xa86ff7f9, 0xfd6de679, 0x1e1b7ea8, 0x51fadfa5, 0xae2316fd,
-	0xa5ea5a3b, 0xcffcb37e, 0xa0ebdfc8, 0xb7cc62df, 0xa69fc558, 0xb5438adf,
-	0xfb8adfa8, 0xa97cbaf1, 0xfa4f5249, 0xb397ecad, 0x6dba2eb0, 0xf007f831,
-	0x0dedfa0a, 0x38c1cf55, 0x5dfee7a0, 0x3d277d72, 0x3d5bd557, 0x67843ff7,
-	0xecadcf4d, 0xd33da1cf, 0x9e990f95, 0xf4c5995b, 0x4cbdcadc, 0xc41cadcf,
-	0xbf519cf4, 0x6fd17415, 0x21eafbec, 0x23f47bf4, 0x1b7d7eb3, 0x23992f6d,
-	0xfdf42dba, 0x9f3b5912, 0x5a3a3351, 0xd4bbfddf, 0x9f73be8d, 0x3d2e73c1,
-	0x823fbbe9, 0x7a841bbe, 0x91c8206c, 0x1c6e3f91, 0xd3e5d368, 0xb1f5f7bd,
-	0x79045ee7, 0xfe8f03f9, 0xe62607f7, 0xfafbed27, 0xbb9048d8, 0xaa1e00f7,
-	0xf9519eef, 0x47e7d5af, 0x28793a7d, 0x7baaf793, 0x1baafe18, 0xd5df3639,
-	0x7586407c, 0xd1176fe0, 0x2f7dbe8f, 0x9b67a3f3, 0xc0d8fa5b, 0x225fffcf,
-	0x2bfd25ca, 0x87e28b29, 0x302b1739, 0xce2bb9ee, 0xccfc05b9, 0x80b10239,
-	0xd0e0bb1d, 0x7ec0278d, 0x3d71705d, 0xe00bbdda, 0xc8e92279, 0xa1db98fb,
-	0xebf6f527, 0xaf9da6bc, 0xf9ae9065, 0x8ccd1310, 0x7157132e, 0x5d59cd81,
-	0x5da823f3, 0xc62df986, 0xabdf893c, 0x47cd9ff3, 0x8fe45f10, 0xe5f8cc7c,
-	0x72788def, 0xad54bc33, 0xaa78f5e6, 0x89e262e1, 0x2ca4ba52, 0xb72f13a5,
-	0x975914bf, 0x39cbed01, 0xf38cb7f4, 0x9c66f0d6, 0xcd4786bf, 0xbea059bf,
-	0x24743f3f, 0x86889e66, 0x22f92ee7, 0xf80dde1a, 0x33d34b78, 0x206190d7,
-	0x3c981f97, 0x7c0d1f3f, 0x178a7bf4, 0x73ade70a, 0x2bcee907, 0x65e2a3bd,
-	0x6148e7aa, 0x24780c8a, 0xf367c035, 0x96be77ca, 0xb377e742, 0x210b9592,
-	0x937f59f5, 0x688f103c, 0x1ea3b6b6, 0x9470f8d4, 0x5985c999, 0xf5ef2bd5,
-	0x7ae21575, 0x50b9c4d3, 0x3d06c2be, 0x7999e6a7, 0xd7f261ef, 0xbaf7fdcc,
-	0x6788518c, 0x91482e58, 0x5d015eb6, 0x86a73fe8, 0x40bc5d18, 0x69cffa17,
-	0xe020fda4, 0x73993abd, 0xa6fde187, 0x3f02f79d, 0xcfa56ebd, 0x39cbce41,
-	0x0e8616f7, 0x65ca7a7b, 0xc58858f9, 0xc8cc18c7, 0x173f5ceb, 0x5d897bc0,
-	0xe68993ed, 0x8e00f796, 0x366e5489, 0xfd00c3c3, 0x46fe8a2f, 0x07c8c5fb,
-	0x7503e53d, 0x2ab9efc7, 0x3a075f9e, 0xeddf01d8, 0xde43d812, 0xb47f5b30,
-	0x1720af76, 0x3a34de22, 0x65f5d134, 0x2983a314, 0xd66f9e06, 0xbd9e2aea,
-	0xef844e21, 0x6ffea06f, 0x7ebb0712, 0xf8d41f5f, 0xc5772cdd, 0xd215c413,
-	0xe806f4a3, 0xcd7de8b7, 0x11b7a6ea, 0xa6ae375f, 0x15dc99e6, 0x407d1a5f,
-	0x6f0e5e0f, 0xd34fcadd, 0x61799891, 0x467e55df, 0xb3f2f599, 0xe6fedacf,
-	0xedab8870, 0x90af50e5, 0x7e2e8250, 0xecccd330, 0x07ab6696, 0x0dfdbcf9,
-	0xee45bdd1, 0xa8a67faa, 0x257f0174, 0x64e27cfa, 0x4de80898, 0xa67c9597,
-	0xe3007bcd, 0xe0f5e8b7, 0xe907ab75, 0x33ff5dd7, 0xedfecccc, 0xead31ece,
-	0x9078c3d7, 0xc7eb28d7, 0x5a47ae33, 0x79a7a95c, 0xbf71d479, 0x71b4bcef,
-	0x84beebbe, 0x3c60b497, 0xd89fdb4e, 0x89767bc3, 0x73163f60, 0x0a107dba,
-	0xfe6fee39, 0x59bffa13, 0xff7ddd1a, 0x530a3f10, 0xe3bebf3c, 0x9f638c49,
-	0x34c8f67e, 0xaf159f90, 0xe542c4f0, 0x838775af, 0x889e5984, 0x45427604,
-	0x5dfb8f23, 0xcde70844, 0xa833b288, 0xf1f0c327, 0x5ef503a2, 0xa0732ec5,
-	0xf15f7e84, 0x103967f2, 0xc35d6b7f, 0x59ff9ff4, 0x91fd1f95, 0xa807c81c,
-	0xbcfed810, 0xa88f3e91, 0xb76a79fc, 0x6fe80e6d, 0xc73b3b6e, 0x2d9c115b,
-	0x0ce2a39a, 0x16459bf7, 0xc36ddee7, 0x33ff6c3c, 0x0331e61c, 0x48e7d17c,
-	0x53d0fcb5, 0x5cbd30cf, 0xe00624d1, 0xf6c5703c, 0x1710ad9d, 0x8cd0f8af,
-	0xfb77abf6, 0xd3ec0919, 0xcf3e2fc9, 0xf1371bce, 0x976878ba, 0x3e76e438,
-	0x59f8866c, 0x01ea1563, 0xf5823f5a, 0xfbf71aa0, 0x15b2718e, 0xd97dee2f,
-	0xe2b8514f, 0xf13b4f37, 0x36cb705c, 0xb723c627, 0xa05f7e5f, 0x7831dc4b,
-	0x9c771abf, 0xf5c105fa, 0xf1dc7621, 0x2127caa4, 0x48ee3eb3, 0x3c6127b6,
-	0x5799c292, 0xd17e231a, 0x5fcfffc1, 0xcdf60278, 0xf2faed4e, 0xf2bb8009,
-	0xfc4f739b, 0x2a93e294, 0xdbac1720, 0xc3df67de, 0xbbed067d, 0xd27d55f7,
-	0xb8d3ccfa, 0x27fad34f, 0x6b7a1bb3, 0x2645fbdd, 0xeeb453ec, 0xe2053afc,
-	0x4ef7abb8, 0xf56d7f41, 0x4953934b, 0x2b407f0c, 0xbd037f81, 0xd23227d8,
-	0x39b1b9ad, 0x4d3ce013, 0x77eb0ee9, 0x58393c47, 0xb2f4e2c5, 0x11de471a,
-	0x4bae5f7b, 0xc671b8dc, 0x3ac1d7cd, 0x65ba28de, 0xf1f88bd2, 0xe1cf4a61,
-	0x0ee3a0bd, 0x38209f75, 0xe3f1b2f5, 0x4a0ff0d3, 0x7d660baf, 0xe342fe1c,
-	0x0c7cff92, 0xba931ada, 0x7b871f8d, 0xdf6d3f81, 0x2159bf6f, 0x5da39016,
-	0x1edc61cf, 0x0f7d47e8, 0x85fcfad2, 0x1cbb884c, 0xc0efdb17, 0x66bdebfc,
-	0xd8aaa3cc, 0x53ca01fb, 0xe36f4beb, 0xf7511abe, 0xc7495adf, 0x5127db1f,
-	0x56ef3a7d, 0xab3b8b07, 0xb4b88074, 0x6ae7c4ec, 0xb5f199fc, 0x2eee9716,
-	0x32d63d1e, 0xabbfed80, 0x5b5591fb, 0x43112cff, 0x0b1b9fbc, 0xd9723af4,
-	0x0f0d547d, 0x98c3c02e, 0xd896fde8, 0xfd8efff1, 0x80dd0316, 0x758f609e,
-	0x7ad0a7ec, 0x07ab883f, 0xed620fb8, 0x666eb5df, 0x62ad34fb, 0x6d45bcec,
-	0xc5a465ff, 0xe812efb0, 0x4f4bbedd, 0x78aef8f3, 0xb42706ca, 0x9d7c574f,
-	0xbf5b14ba, 0xd4e16adf, 0xe7be037b, 0x67257ebe, 0x05981bcc, 0x78d5597c,
-	0x4a7b0244, 0xf9b4df5b, 0xe7fd529e, 0x78f2cf53, 0xb05d644e, 0x51bbf519,
-	0x1613547f, 0x5bc23437, 0xab7a616e, 0x1fad89ba, 0x023976a7, 0xa9cfda76,
-	0xaf91bb03, 0x911c77ab, 0x83bfb4fc, 0x45237fdb, 0x60acf2a2, 0xc14408fd,
-	0xfd85ea7f, 0x897f6c39, 0x71c6ebf9, 0xf1c752ee, 0xe38f6286, 0x374671dd,
-	0x507f0ace, 0x2e7ee762, 0x4149de3f, 0x9dfd0d99, 0xe409116c, 0xf20c9ffd,
-	0xe31881c5, 0x5a88b5cf, 0x0fc98b3c, 0x1cf1475d, 0xbb9d83a6, 0xb42513e4,
-	0xc63b57bb, 0xfde7087e, 0x19243b57, 0xb57517e2, 0xeeb52f2c, 0x4069dcdf,
-	0x5b84baef, 0xdeae3f71, 0xb2575f80, 0x1ae21f2b, 0x51d2c2ae, 0xbd46aec0,
-	0x7498a093, 0x1476aff0, 0xce14caa7, 0x469daab5, 0x0b9e3704, 0xc5459de5,
-	0x65de1f30, 0xec635972, 0x52f6883b, 0x8bc289e2, 0xe39fd2e8, 0xca469724,
-	0x7f968fd0, 0x39696953, 0x052e8d88, 0xb1858c53, 0x99fcddec, 0xdb779c2e,
-	0x507fd50e, 0x614aec88, 0x8eb06479, 0xcf8aedb4, 0x43f1c321, 0xb47e50a2,
-	0x1db9cfa9, 0x5e83f7fb, 0x4a24eb5a, 0x8a339502, 0x86cf9955, 0x2c23acf3,
-	0xe9f0365c, 0x857aff99, 0xf10d6bf6, 0xd9b457e8, 0x25527cb5, 0x46cce401,
-	0x41bcc41e, 0x936fe560, 0xe634e13a, 0x25781213, 0x298d3eea, 0xa1fd1dbc,
-	0x7c589bb3, 0xff572780, 0xcf8b027a, 0xafc00091, 0x542b2fae, 0xe212cf38,
-	0x3bfbc30e, 0x580f181c, 0x9422c6f6, 0x3443a01f, 0xf58a92be, 0xac1b5ee7,
-	0x67f01cce, 0xbf555a36, 0xc0b4afc6, 0x6ac59b39, 0xf54a7dbf, 0x18a962e7,
-	0x975e41fa, 0xe5faf2a8, 0x9843a2d2, 0x8a59e68f, 0x8e753e7a, 0x31acdcfe,
-	0xaa204b4f, 0xfe601c9f, 0xadbc9773, 0xb708cda6, 0xc56b7f31, 0xc35d7d76,
-	0x37a027e3, 0x127402af, 0x80e2e5fb, 0x3237e23d, 0x4613d7f8, 0x9afc777d,
-	0xb5f8f4d3, 0xdafc7aca, 0xa7f11886, 0xadc3afc7, 0x97e697c7, 0xf8df8776,
-	0xc873fab1, 0x8afc2aff, 0x548ed556, 0x4aff4af1, 0x654c292d, 0x42e9dc03,
-	0x28c2e518, 0x30f61947, 0x9feeff07, 0xafc5a81c, 0xefd40edc, 0xb87cea69,
-	0x1b3becc5, 0xf00f11c8, 0xe08e51ba, 0x79e82024, 0x75d8f91b, 0xfac40acc,
-	0x4d7b7c8c, 0x355cf4f7, 0x0b23d5fd, 0x809b57e9, 0x3f23877f, 0x89bef3b0,
-	0x05975024, 0xc176ea72, 0x59f41dfa, 0xb8458bdc, 0x17b885f7, 0x5efb820f,
-	0xa43e585c, 0x0db4abe6, 0x306e7825, 0x029f3e18, 0xdca1e9fa, 0xf7a069f6,
-	0x29484bbc, 0xc51fc1e8, 0x0f03f3b1, 0x38bf65a8, 0x85abd549, 0xef824c6f,
-	0xe70ca243, 0xdb42dbd5, 0xdea0832c, 0x2a3de3c4, 0xabfa84de, 0x90d6fc60,
-	0x6c5ae0c8, 0x38820c09, 0xc7115ec8, 0x013c5d6d, 0xd87665cf, 0x2f96216f,
-	0xccfa16d2, 0x9f4a28b9, 0x7a3d36b7, 0x36b9c415, 0xa9e7629a, 0x7e9ab14c,
-	0xec1bfad8, 0xc537b792, 0x1eeaf2ca, 0x51e7401a, 0xbaacfd3d, 0xb879330e,
-	0xabf3a556, 0xf9c46f4b, 0x64e214bf, 0xf88a4758, 0x461a6edb, 0x3dee39e7,
-	0xb0cf8d41, 0xf528e578, 0x2fd03afd, 0xdfeb5fa8, 0xddc3e9e5, 0xe7020547,
-	0x2cd546f4, 0x15eb7f45, 0xca73e527, 0x704a7917, 0x616df024, 0xcdef0128,
-	0xd04c7ef1, 0x22dd1fae, 0x4f33f8e8, 0x22f3575d, 0x44c05e54, 0x3edf50f9,
-	0xec18222e, 0xfc0f00a0, 0xfd71ed75, 0xd55685f3, 0x149272ee, 0x970df3e0,
-	0x5ef20e78, 0x7b89dadb, 0x6dbb850d, 0xa3845f71, 0xfa9c3ced, 0xbe25e5a5,
-	0xbf7ad638, 0x62f8caca, 0x9d7044a3, 0x8ed4b8d9, 0x4b03c5f1, 0xf580ae2b,
-	0x7b1fabfd, 0x8e7588ae, 0xc53f4a3c, 0x252c7cb3, 0xfe058c9e, 0xbc31cb5e,
-	0xc697a7d7, 0xf8d7f7c8, 0x8d6fe359, 0xc697d3af, 0x35e56279, 0x7665637e,
-	0x21d2c15a, 0xdafe049c, 0xe38f0e3e, 0x5cf1aeb6, 0x9f8ddcf6, 0x7800c9ac,
-	0xd0e74dbc, 0x3884b6ee, 0xb1bd9625, 0xfec4eac1, 0x6bf8d75b, 0x2eef8f21,
-	0x27a09c2a, 0x0377efbb, 0x813f5bfa, 0x677c2ca0, 0x73c32fa9, 0x642c4bbc,
-	0x85bbc40b, 0x1c5bf4fa, 0x6f93ffc0, 0x7de14758, 0xeb84d4ac, 0x8dd146eb,
-	0x08abfbf0, 0x1a83f8c1, 0x8d37edcf, 0xcf3e8e6c, 0xff3584fc, 0xc7a52b59,
-	0xd21756b3, 0xe6e3c925, 0x3ff77e00, 0xf209dbfe, 0x8cd176dd, 0xfaabec74,
-	0xaf77da43, 0x36dd9959, 0x0ad94e33, 0x64f293df, 0xc7b71394, 0x123c5ee9,
-	0x78a04dee, 0x4ea3928f, 0xbbf1f9fa, 0x71d50f44, 0xbb449e14, 0x2892f909,
-	0xc5d2ec8a, 0x4728fd29, 0x30905c9a, 0x4d8f2047, 0x885cabd3, 0x1ca83b0b,
-	0xc3d8b28c, 0x962477e0, 0x105379d3, 0xfac2c4ac, 0x754e116b, 0x3cc6cb9c,
-	0x7997ca79, 0x608a3870, 0x71121448, 0xdf4d7fa1, 0x6d7a7a6a, 0x59794102,
-	0xa810b0fb, 0x126cfda3, 0xaf885622, 0x01722964, 0x0a251aa4, 0xef179e32,
-	0xff304e5f, 0x78fd96d2, 0x42dd8742, 0x37c47e85, 0xfb5882fc, 0x869c7c79,
-	0x401fcf2f, 0x6a1ce46f, 0x8de6003f, 0x73c6cadb, 0x3b4166bf, 0xa87f43bd,
-	0xba9158f6, 0xdcfb8efe, 0xc209f2c4, 0x3ef44893, 0x687f519b, 0xebb8c9f6,
-	0xbf606b22, 0x189fdc68, 0x055bb49c, 0xcead1bbe, 0xa89f43b7, 0x1098e6eb,
-	0xfbf427d5, 0x66c8d0dc, 0xf72b07b8, 0x5dc72663, 0x3f21c9f4, 0xbefbf80f,
-	0x17c8c47a, 0x2e54c223, 0x32a1f6d5, 0xeae1a7dc, 0x19fb43a8, 0x9e49de83,
-	0xed152a3e, 0x8cdf955c, 0xdbe4d678, 0x77b9f728, 0x0ccd9bbb, 0x1a47e62e,
-	0x275c21c6, 0xe836721c, 0xb078b7a5, 0x29f2dbf7, 0xbf5c281e, 0xf4a3f902,
-	0xb81f384b, 0x21bfe601, 0xe415bd74, 0x27af7be4, 0x5475fa21, 0xbcd3f69e,
-	0x0fae3e27, 0xc04e27ae, 0xf3fef543, 0x46127aea, 0x01c8777a, 0x78e89395,
-	0x46ffc689, 0xa3e4d77e, 0xc8de2e0e, 0x047673c6, 0x0b9e59d6, 0x663065e2,
-	0x7805c9b2, 0x3aedecd5, 0xfe25bed5, 0x56ffb474, 0x1eba88bb, 0x4f800665,
-	0x5ecd44ea, 0xe3a25b77, 0x051dab53, 0x4fdb97a9, 0xfea45ef5, 0x1b39d459,
-	0xfe8ed0af, 0x84a2f79b, 0xfe37bfcf, 0x7914289a, 0x898dfc3a, 0x7f15dd1b,
-	0xb08471f1, 0x9ffec2fb, 0x230cdf9f, 0x7727dc7f, 0xe25aefce, 0xf5422579,
-	0xf5aade47, 0x3f193675, 0xd7969c39, 0xfb682f55, 0x01e9dd9f, 0xa98fbca3,
-	0x70c66fac, 0xeef20f4b, 0x25f8a9b5, 0xb3e80664, 0xb76a61f1, 0xff957564,
-	0xbcfceaf3, 0xb6f78636, 0x8307db5b, 0x3de7ad3c, 0x2f687135, 0xb0264c46,
-	0xb413762b, 0x8ffbdc7b, 0x5bde513a, 0x4feb7492, 0x8fc0bb57, 0xa7d9a9f2,
-	0x7c6a5d9a, 0x552ec3af, 0x3e2d1bd7, 0x795135ca, 0x193cf0a1, 0x1c03f1e7,
-	0xbfe62e75, 0xd05701c2, 0x3d584f63, 0x365fc075, 0xd838973a, 0xce12192f,
-	0xb096f162, 0x93bb3e4e, 0xde419b47, 0xb03f1482, 0xfae9f9fe, 0x1eeb8837,
-	0x0971b19e, 0x85aa5e0c, 0x97e9bec0, 0xd560d847, 0xfbc7f304, 0x6bfbb0e5,
-	0xfbb2e5fa, 0x31c73732, 0xa18b65fb, 0xfa5ac27c, 0x144bcc18, 0xfb9cdf88,
-	0x5006e1fd, 0x64f90e21, 0xf800d29c, 0x382b14b0, 0x71170c8f, 0x19de9473,
-	0xbc839042, 0x994ac489, 0xd247f163, 0xfb48ffb9, 0xf39128cb, 0x06323f81,
-	0x9a373c12, 0x9e7d8a11, 0xf13895e8, 0x8debd987, 0xbcc1ce5d, 0x41cfcaa2,
-	0xa937ce89, 0xe9839d84, 0xf050fb88, 0x8eadbf01, 0xadb2715b, 0xab3ed817,
-	0xd9e1813f, 0xc101bfe8, 0x5a825e60, 0x822257bf, 0x2bfd1135, 0xdfaff03f,
-	0xcaff4164, 0xd041dc46, 0xb1c41fb7, 0xce3aecf8, 0xbfea1ebd, 0x702dda10,
-	0x37268fcf, 0x343c3c9a, 0x40b716e1, 0x775e755f, 0x5f7c0736, 0x00ef172a,
-	0x9c275b9e, 0x6716bc1d, 0xf8c99ed2, 0xf975e14e, 0x9afd1af6, 0xacfd1d44,
-	0xd6895710, 0x08690ef3, 0x5cadedd8, 0xaafc1b9c, 0x831ce5d6, 0xe7a8b397,
-	0x3cdd0411, 0x1fcc6cd3, 0xe7f55369, 0x90b2e3df, 0x84f5b51f, 0xc63d6fce,
-	0xe8f30d7f, 0x386a8738, 0x973c6a77, 0x11dd969a, 0x7cc74a07, 0xee0952dc,
-	0x43672332, 0xbce3b436, 0x124cf6ce, 0x6a64bce3, 0x5cf31ac4, 0xbc5256b0,
-	0x4b780d7d, 0x40126b15, 0xcedea71f, 0x1f1188f4, 0xc47f9c6d, 0xfb47d841,
-	0x1f331883, 0xd2d32b45, 0x4c584a6e, 0xbf4b4fdf, 0x79ed4b01, 0x19885d83,
-	0x71b24c57, 0x64dcec3f, 0xfc18b103, 0xed1b24cd, 0x9de7b4ef, 0xff1415f7,
-	0x37bb8c76, 0x37bc31c4, 0x37bc31c4, 0xe53e1a48, 0xcebf9078, 0xf7975bba,
-	0x4967c1b4, 0xd10f2010, 0xb9f28e9f, 0xdde8c5c4, 0xf682bef9, 0xdca21f4d,
-	0xc4941730, 0x436c9106, 0x21f167be, 0xafc87ced, 0x4024cf7c, 0x96db94be,
-	0x16fbfaa5, 0x0604df46, 0x530df9f7, 0xb214dc70, 0xe2983ac6, 0xc9a96979,
-	0xd3a3710d, 0xc2723f0b, 0x1985e991, 0x0f20792d, 0x1b8f79a7, 0x984a97e6,
-	0x8e6cb85f, 0x2ed30814, 0xc2a81b93, 0x01ba7462, 0x4ccb3bf7, 0xc7aef331,
-	0xe9fed8d8, 0x961738d1, 0x90d36969, 0x92f59d4e, 0x8c4bf004, 0x35e54a7c,
-	0xcea8f17d, 0x6f94cc73, 0x790c5b14, 0x1349136b, 0x185beb87, 0xb1ac95f1,
-	0x35b7aab3, 0x39064979, 0x52ab7d84, 0x3a3547aa, 0x4d5f500f, 0xfe28b8c1,
-	0xbfd7a171, 0x79c37f06, 0x45ea015d, 0x10c88e4d, 0xa0ade7a6, 0xa1e2a377,
-	0xe83f7b6d, 0x9f8efb0f, 0x0739dbfc, 0x55fd3bec, 0x9e807768, 0xbbcf7e3d,
-	0xf4c7380e, 0x2e2c3dc9, 0x4fc18772, 0xfa63645b, 0x74ad8f7f, 0x8177e01e,
-	0x9e791fef, 0x77257e28, 0xe593fdb3, 0xde70de01, 0x506f7f5d, 0x70c93055,
-	0xf11f908f, 0x1fdea55a, 0x46c7a466, 0x2cb78b1b, 0xca59b1df, 0x4f7c6190,
-	0x5c7f8c25, 0x378f43f5, 0xd1dfd03a, 0x63b859e0, 0xd9be0484, 0x7566435f,
-	0x6445bdff, 0x025287eb, 0x151e67fb, 0x0f38466f, 0x2f6af7aa, 0x8fcb25f9,
-	0xdd63a329, 0x27b0f54d, 0x187bcec4, 0x13e4b1e7, 0x129528b9, 0x1cfdc96f,
-	0xfef0ddfa, 0xf33d743d, 0xee1f7ddc, 0xd9e719b3, 0x051f5ef5, 0x2a65b3fd,
-	0x6de78dbd, 0x3ed88597, 0x41e262f8, 0xfe72ecf9, 0xc5cec436, 0x678de318,
-	0x00db650f, 0xa9b0bf0f, 0x323cc4f1, 0xef6dce06, 0xfe20343a, 0x9f56f772,
-	0x828bef52, 0x3ca1bb7b, 0xce5823ee, 0xe2902303, 0xf6f432bf, 0xd55fc05d,
-	0x3ef13b4d, 0x8faaefb4, 0x9c2742aa, 0xe9ad4b90, 0x6e876a25, 0x8b20f903,
-	0x5a7d9d39, 0xc49cf9bd, 0x9f866afc, 0xb7e7d4db, 0x20723e01, 0xd9fe5bdf,
-	0xdbef4a04, 0xd1f3c52a, 0x6f3da5f7, 0xf7c3efd3, 0x3cdabe76, 0xed6b79b5,
-	0x9c5e6a55, 0x0e4d3bf1, 0xb97ca9e6, 0x75f4eb78, 0xea8a297d, 0xa9917ef6,
-	0xf3c3939e, 0x2d9f1a42, 0xe945a523, 0xa349f831, 0x84df076f, 0xd3f38e7e,
-	0xbeb8bae8, 0x3f83c54c, 0x4c4fdd4d, 0x91957883, 0xa73a7a8f, 0x32462add,
-	0x7c8dbe41, 0x7dcddad2, 0xb31b2128, 0x4acb162f, 0xa8cfc411, 0x15cebbf9,
-	0x171cdf65, 0x14fe0fea, 0xe32b6ee4, 0x083d0efb, 0xf7e8314e, 0xff5c4537,
-	0x54e43a57, 0xe90fffb8, 0x13f20e37, 0x4f787ecc, 0x4f98e71b, 0x808a0651,
-	0x4f2c62ff, 0x81954afa, 0x97db3a83, 0x04e73c6e, 0x086dbbfb, 0xab51b8c1,
-	0x69ef0f43, 0xe37a8f1b, 0x4a8f4ab4, 0x3f9be5a1, 0xdadace83, 0xc7177982,
-	0xa771a92e, 0x58e2e64b, 0x39d8b4f3, 0x7778bddd, 0xf9a872a8, 0xfa540b35,
-	0xfb6211dd, 0x4d370be9, 0xc9747a47, 0xa1fd54bf, 0xf50e46b2, 0x4b3e918e,
-	0x3e63d7dc, 0x3e40a2da, 0x5e85df7e, 0xbba441e4, 0xda776e91, 0x371eec5d,
-	0x7b8246a1, 0xe26d8eed, 0x8571ff70, 0x73ff7b10, 0x9df4ddb6, 0x479c63e6,
-	0xdb2ff077, 0x2faebb5a, 0x908ff981, 0xf08dcf80, 0x425ff36b, 0xd4a7a614,
-	0x2f3776f9, 0xf2c49912, 0x7f75d434, 0x815b9c39, 0x790793fd, 0xc6adcf96,
-	0x35f834a1, 0x28f38d78, 0x7cf12be2, 0x8f035b41, 0xf877d979, 0x77067dd9,
-	0xfd70e5ac, 0x9a4e8eed, 0x7bf6d15e, 0x30ca9baa, 0xfb43cb6f, 0xedb63b01,
-	0x29f6c263, 0xcf7873d6, 0x0cf4b75b, 0xeea57cb1, 0xa30849e8, 0x374a62db,
-	0xdebb3ff0, 0x0caf909f, 0x0a27de8c, 0x8c0ca0dc, 0x4122b7de, 0xb15957cc,
-	0xf9eeba7d, 0x8e35768d, 0x9ef5eaa5, 0x24d48fe4, 0x696f8cc4, 0x9fc9a6f2,
-	0xda778f26, 0x0a6f6665, 0x59198381, 0xd1879f80, 0x7afaa1bf, 0x3df99d9e,
-	0xafa5cd0f, 0xa73c6f54, 0x3258a7db, 0x096bd196, 0xbbcf825f, 0x0f14bbd3,
-	0xd8bdbd3a, 0xf8c3cfae, 0xe6d1f3a1, 0x3689c9a1, 0x189ca33f, 0x43d237bf,
-	0xe919ef8b, 0xc007a462, 0x5bc67e09, 0x35816d7b, 0x38b7ce14, 0xaf7fb706,
-	0x4d6ee115, 0xb9c0ac9b, 0xf9f4eacd, 0x3e01fe58, 0xb0fb074c, 0x768eceb4,
-	0x8d87eaae, 0x225c5dea, 0x5ecbb557, 0xd9232ab2, 0x24d2a7b9, 0xb58993e0,
-	0x17161991, 0x583e8f21, 0xa4f7045c, 0x32387c4e, 0xbff14203, 0x5646f07e,
-	0xd77916df, 0xfcfb86e2, 0x690a8a4b, 0x2fd071fd, 0x95fa2fa0, 0x6efbe0db,
-	0xf973c4eb, 0x1fdeccba, 0xcf9d2e65, 0xed66b1ee, 0xb33ed495, 0xf2aef5d0,
-	0x4157e0f0, 0x4a5b2b7e, 0x542e218a, 0xba781109, 0xce2955de, 0xad872db0,
-	0x7be9e3fb, 0x4f3cd91f, 0x76ee21d9, 0x8bae2d71, 0x94058795, 0xc588722f,
-	0x573a0567, 0x6d6efd2b, 0x2993b51c, 0x5a26d77e, 0xd317e0dc, 0x97f07ee7,
-	0xb22a26d7, 0xa35cf51c, 0x70077c1f, 0x7cb135ac, 0x0c6ffd82, 0xc65c8f8e,
-	0x23efd82e, 0x34cfe025, 0x1a582cfb, 0x1725f3db, 0x37c8e79e, 0xb18978b1,
-	0x76bb6dfd, 0x00ce49ae, 0x243ea8be, 0x1fc3fca1, 0x84559fd8, 0x613549c9,
-	0x0eaad0e7, 0x53773c13, 0xcf08a87d, 0x84b9c0dd, 0xe07a754f, 0xa6ee735f,
-	0x9e18af93, 0x44ae040a, 0xd0b71a88, 0xf9d5d56e, 0x9810d354, 0xdce3e10f,
-	0xcf846e70, 0xa2ecd530, 0xa0afe7f3, 0xe087c525, 0xff70f372, 0x89e4fd4c,
-	0x559fdc3c, 0x2d79aa27, 0xbe3e7626, 0xe557dd63, 0x39fb2b4f, 0xdd028f4a,
-	0x25b1ff4f, 0x53f6c6cf, 0xe6d6afd0, 0x8429c75b, 0x35ed7f03, 0x7219e782,
-	0xe0334993, 0xb19446cf, 0x47166fc0, 0x6c97caa2, 0x65fe9b3f, 0x9b36e940,
-	0x7e53237e, 0x9fc1faff, 0xe3bbff22, 0x68b2ab4d, 0x59f8739d, 0x2e74c33d,
-	0xef30b28b, 0x6bf565a8, 0xd006e74c, 0xc358e8ba, 0x4af1b0ea, 0xa3b33e17,
-	0x143fc8ae, 0xba3171c6, 0x01ae50ee, 0x2c4c16fe, 0x901c23ae, 0xcb477f70,
-	0x794b5957, 0xe2d1f806, 0x5d747a60, 0x3673c16d, 0x28179b88, 0xec4fe432,
-	0xfa41ef51, 0x5786a5be, 0x7f4266de, 0x7fc04a09, 0x53e183bc, 0x54690ba3,
-	0x5e3c81ae, 0x81ae5412, 0x0e7ebd7d, 0x7e83a24f, 0x96adf23f, 0x1bcfa089,
-	0x0f28f9df, 0x82bf73ef, 0x2df233f5, 0xf9d243ea, 0xff6dfe9c, 0xe4fbd1cd,
-	0xa9f91cfd, 0x03251df0, 0xec9cafda, 0x3951b722, 0x2c8853ac, 0xad9f8365,
-	0x091b2ff7, 0xd91f4fd3, 0xa070af4a, 0x3ae3093e, 0x67bb13f6, 0x7e8dd400,
-	0xec496933, 0x949dde55, 0x17ee3773, 0x7d346625, 0x85d610b8, 0x4a7bb1df,
-	0xfcc14538, 0xee3b17d3, 0x9718236b, 0x373891b2, 0x9b898dc4, 0xd453f9a4,
-	0xf1899af8, 0x945e7255, 0x87ceacff, 0x79085f7e, 0x2c6c63f2, 0x8fce81bf,
-	0x823afd07, 0x848e58c8, 0xa0365938, 0x3df583d8, 0x4fe1f824, 0x588fff69,
-	0xb2ca7c59, 0x8fe2e89d, 0xb7160e65, 0xe2c9c079, 0xf062718f, 0xe22bb016,
-	0xd81710ce, 0x4b8f6d15, 0x0bcfee02, 0xdf709bae, 0xe309a0ee, 0x018b4fdc,
-	0xb517ec17, 0x5bc8255f, 0x6d7f6748, 0x7eb5dd2a, 0xabe4911f, 0x0bf7ee20,
-	0x9d3fab27, 0xbb8f304f, 0x801484fd, 0x0cc4dcfd, 0x3c744d4b, 0xd9839e69,
-	0x1573bfbb, 0x043a04cc, 0x1811c6f7, 0x38becc7f, 0xb9e3d013, 0xe056b91d,
-	0x4701178b, 0x66890f14, 0x5fd09dd7, 0x6f0a39e2, 0xf9673e16, 0x223c82fd,
-	0xfc77e29e, 0xee19768d, 0x1ada7ad1, 0x56f311bc, 0xbde1379f, 0xee4a2fc1,
-	0xf17f50e9, 0x3d02ecac, 0x305674fc, 0xbcf3e70e, 0x62f3e709, 0x2bd5fb5c,
-	0x0c0fdc29, 0xc12ef161, 0xcfd00446, 0xbe40a982, 0xae5f3e93, 0xafa6b1f2,
-	0xd11c8137, 0xc11c23fa, 0x29820c73, 0xcb48e51f, 0x276b6a27, 0x67d44f98,
-	0xfc0f0b66, 0x8b5d371c, 0x8879853b, 0x25284d17, 0xb04dcf68, 0x05ce788b,
-	0xbce199f2, 0x0f5544db, 0xb2b8fc4f, 0xbb07e584, 0x9ebdc30f, 0x7ef576cd,
-	0x739f7530, 0xd727ca92, 0xa16f0891, 0x245dd7ed, 0x4d27886e, 0x8fdfa8ba,
-	0x5f60ca78, 0x57fb514e, 0xf0855dda, 0xede89f38, 0x450d29bf, 0x2c3d6027,
-	0xfc008a20, 0x6862d934, 0x09d23b07, 0x9febf0f7, 0xfd50e03f, 0x19924cdc,
-	0xeda6c79d, 0x87e14d43, 0xb5fb446e, 0x5e037258, 0x0f95da76, 0xdfc03f20,
-	0xc5cb9222, 0xb1f29f25, 0x1721c37c, 0x2cae046d, 0x8769fca4, 0x50dd5cf9,
-	0x79d2b7ef, 0xf5903d5f, 0xfa087c0f, 0x93c7cae5, 0x8fdf4093, 0x95a5e957,
-	0x7f01df1a, 0x7f19e2b9, 0xca7786b9, 0x2c8ed3e7, 0x37934f7c, 0x67e83be0,
-	0x1f98188f, 0xf29bbf6b, 0xafc0d3eb, 0xfd04ed3b, 0x5ba59fb8, 0x699c80e6,
-	0x7caab4e3, 0xd5d72c6d, 0xbf0fdcae, 0xc0bfe4fb, 0xbec28dd6, 0x75e8a517,
-	0x83024fbf, 0xcfd72bd7, 0x68790698, 0xccf31176, 0x5173d452, 0x1e92fcd1,
-	0xdf1a2fc5, 0x9c59dab5, 0xc99fe348, 0xe1e5dfbb, 0x840be4f9, 0x8748b2b8,
-	0xcff1a2bf, 0xf7187f44, 0xe6122781, 0x67f9189f, 0x93fc3757, 0x40165e7f,
-	0x9fe1756f, 0xba7f8c43, 0x0fda1be3, 0xe4616bde, 0xaa1c779f, 0xff2dddbd,
-	0xfcf3c25c, 0xbe4ef7ab, 0x93657eec, 0x6a9f9f4f, 0x62d9c72c, 0x54bb2fe7,
-	0xea96efbc, 0xbd01ca6f, 0xcec4d531, 0xe32409ef, 0xeeef0a16, 0xfcdeed38,
-	0xefa86c9a, 0xda1e9814, 0x1ea33219, 0x78f769da, 0x669b7e30, 0x0557e761,
-	0x23ce044f, 0xe45afbb8, 0xd921dfe8, 0x587660ee, 0xfb8f0c50, 0x37f1ec02,
-	0x9d8c1f18, 0x2a43cb9a, 0xa662fa5a, 0x971d4617, 0xcfefc336, 0xbfccea3d,
-	0x06967c00, 0x79dfa3b8, 0xcf784a8f, 0x0951f552, 0xf76fe3f5, 0xf1045dbd,
-	0x79cf2d51, 0x8bb79ecc, 0xfbc2860a, 0xa1fedf8c, 0x8ead65ea, 0x5f404047,
-	0x1fddee1a, 0x4b1e71d7, 0x297e6f7f, 0x674e51f0, 0xf93ef1bb, 0x3fdb1c60,
-	0x11644d99, 0xb4719886, 0xdeb85ef4, 0xfcaf78cc, 0xff3b30ec, 0x27b0f336,
-	0x2af2bdf6, 0x37ef187f, 0x8a77f6a7, 0xe7efec13, 0x6841f65a, 0xdd6cc884,
-	0xd7354a0e, 0x26a33f30, 0x9349f81b, 0xf8a3fc43, 0x44327e0b, 0xb706bbf7,
-	0xd07ff3a9, 0xa9fbb02d, 0x4bee1222, 0xefb09cfe, 0x363aea82, 0x40f4c9ca,
-	0xe617eaee, 0xcb239c03, 0xcba06695, 0xd7162eb3, 0x5b0905f9, 0x6e6e81b2,
-	0x8253f701, 0x0bf93ca2, 0x223df3ae, 0xd3b10e94, 0xe27d3df6, 0x8ff8c246,
-	0x9c633d3a, 0xed099f60, 0x31bbe087, 0x824773e3, 0x588fb71e, 0x9aeb049b,
-	0xab853706, 0x13bd9b78, 0x81ae0d0e, 0x8f97c64e, 0x00c6cb3a, 0xd03be01e,
-	0x8e474d4b, 0x8d7be059, 0xcf7b821f, 0xe2883e30, 0x4e83e00b, 0x4016e0be,
-	0xa283c35d, 0xfdb7cfae, 0x8b42f88b, 0x17c8f46b, 0x7e70b710, 0x0b98be2f,
-	0x05f23578, 0xce3ce7b5, 0x505cf618, 0xc6937962, 0xe7b13fe7, 0x896efbe3,
-	0xd913de60, 0x6bbf6567, 0x7dc049e8, 0xd8b8df90, 0x1c9f6d98, 0x28a6a4cb,
-	0x7664e559, 0x2a3bf6bd, 0xda1cc223, 0xa2a8239f, 0xbced0db8, 0xdd27a87e,
-	0x31c8fe2a, 0x46fb838e, 0x033e3731, 0x1270d0ec, 0xcc236bd8, 0x87906125,
-	0x1989b65d, 0xdae63f60, 0xfcc36426, 0xfab21e5f, 0x5ed2584d, 0x9bfe5bee,
-	0x7da772ad, 0x66c3e9a5, 0xfc6d5bb5, 0x4c7f2a35, 0x2779d852, 0x70d1ebd0,
-	0x9003eb68, 0xc2e0e009, 0xdadf4db3, 0x22878f50, 0x00936f14, 0xfd878a0e,
-	0xfb04691c, 0x24a4df21, 0xb03b064f, 0x3800584f, 0x9d7ef6db, 0x92cef109,
-	0x021febd0, 0x3eda25bc, 0x0fbf5bac, 0x35b7b46b, 0x3ff3487b, 0xf3497b34,
-	0x82aec17b, 0x1fd532f6, 0xbed99971, 0x05b084d8, 0xe47853ef, 0xa2957cac,
-	0xe740b3ca, 0xe3cea251, 0x7082d266, 0x4ca9f769, 0x7251f153, 0x39abfa88,
-	0x54c84ed0, 0xeaa9878a, 0xdd532a7d, 0x6e22fbfa, 0x3efb1b1e, 0x9e9fad15,
-	0x1bae37de, 0xa3f61ad7, 0xc879687e, 0xf94feec7, 0xc3f98fbd, 0x7ef007e3,
-	0xb1dfd601, 0x09feec59, 0x21c3c317, 0x763af629, 0xf1eb9551, 0x9c0e48a6,
-	0xe7bfdec7, 0x1e6eb8ef, 0xf7f7f3d8, 0x771c8ec1, 0x97902042, 0xa8c4fe3b,
-	0x180fcc78, 0x695f232b, 0x6f3f7afd, 0x9cf611b4, 0xccdeff44, 0x728f0a41,
-	0xc167c025, 0x8f5395f2, 0x9dfd0a3c, 0xe8902a3f, 0x92451f73, 0xe5c42067,
-	0x1ddfd48b, 0x7b31c83a, 0xa83f6b4a, 0x11c7defe, 0x21216f95, 0xc567bb43,
-	0xa9e7451c, 0x1a1ffdea, 0x2f1ea75d, 0x74e4213e, 0xfdfc0fa5, 0x5a10e233,
-	0xaa9ce1fc, 0x9ff3490f, 0xf5ce7cf0, 0x600a778d, 0xc69f5fbf, 0xdc6a2513,
-	0xe9ea641b, 0x4e21c547, 0x6ff60d3a, 0x4e8f33f3, 0xb7e5bc83, 0xf4814c78,
-	0x99be7686, 0x3e16f503, 0x462abde6, 0xba1f5efc, 0x9955ef13, 0xa3e4cf1b,
-	0x5fc7f1a7, 0x3864f94d, 0x3b309dd0, 0x4bdd8f30, 0x81efa462, 0x1491ff3d,
-	0xbe3dda19, 0x91bfa3bb, 0x2a9caf0e, 0x9eac7dc0, 0xdbe461e8, 0xfe9e747d,
-	0x5377e12b, 0xbf8fc42d, 0xfac2ea9b, 0xac34beab, 0xddeafc6b, 0xd81264fb,
-	0x4e9f1a79, 0x337c6249, 0x49a3f76e, 0x2f49dec4, 0xc586de23, 0xc97ffe33,
-	0xee25d9aa, 0xa3e8d359, 0x843ae977, 0x2d27ea8c, 0xaa563790, 0x70fb3ac2,
-	0x4425da11, 0x5c62cf3d, 0xb7f366df, 0xda75014d, 0xccfeefd3, 0xf57acb94,
-	0x6fc5397b, 0x0eb00bd5, 0x99ab0916, 0x78ed531e, 0x9d231e0d, 0x08a523df,
-	0x19f0777f, 0xe708c0f9, 0xf6f91d4b, 0xda07ae0a, 0x18cce0ef, 0xc6262598,
-	0x8f868798, 0xc7ae8499, 0x8f5fbdd9, 0xdbd78c6f, 0x178ee7ef, 0xdad011fe,
-	0xe919bc9d, 0xf4d76c66, 0x900c1147, 0xec1fa58b, 0x29f1b993, 0x8ba2df48,
-	0x3ae85112, 0xcfe9fa43, 0x2b9293f5, 0xb956df91, 0xf8eeb3d8, 0x4f22faad,
-	0xf93b233c, 0xd87a6c4e, 0x5bb77c06, 0x1c41b7a8, 0xf4fb3af5, 0xc2bd103a,
-	0xe2660bcf, 0x131115fd, 0x94dad081, 0x886699d0, 0x243f7833, 0x20a1be78,
-	0xf0327fb4, 0x0b42abe9, 0xe76d59fa, 0xca387909, 0xd50a6cee, 0x6b2ec0d9,
-	0xf3e7664a, 0x5d10260e, 0x78c5f4fe, 0x8e9a6fa6, 0xc4a69d9e, 0x62ee1f68,
-	0x28833cfc, 0x9ff439c9, 0x7f29eb45, 0xc7dc1f80, 0x42927181, 0x325afdce,
-	0x39732dd8, 0xf6da23f4, 0x992d798e, 0x7b7adbc2, 0x2999ea02, 0xe9ddf74d,
-	0xfe0884a2, 0x6f3e2463, 0xfef0e32f, 0x8dd92284, 0x59c5a2f5, 0xf98df7e8,
-	0x09466926, 0xa220dfb4, 0xaf8533df, 0x755e2014, 0xabc38d3a, 0x9170f63c,
-	0x623df85a, 0x0e3674ff, 0xc093f971, 0x24a77d3f, 0x66fe0469, 0x07d5ac9e,
-	0x122eefe1, 0xfab6ff83, 0xcdfb73a5, 0x2cf57db4, 0xa78df30e, 0x3f8832b8,
-	0xd68a7f8a, 0x5baf384b, 0xc005a942, 0xf58a33d7, 0xaac31ee7, 0xd4ab393d,
-	0xfbd10246, 0xe50b9cf9, 0xfdb5a0fa, 0xf11dfc56, 0xf98122bd, 0xa37e7269,
-	0xe7b3efca, 0x9bbee924, 0xa9dd984e, 0xaa4dd5c9, 0xfaa8ddfc, 0x193d73cd,
-	0x094bf1ba, 0x40fe87b3, 0x64810bda, 0x7ed8b8f7, 0x96f6b4f4, 0x25e1f3c3,
-	0xd068dfbe, 0x310d3787, 0xe57cbdf8, 0x348be45a, 0xc8f78dce, 0x37edf5b8,
-	0x8dd7d58f, 0x0fd46bf2, 0x8f8b20b3, 0x3427aaef, 0x2f6b307d, 0x683c422f,
-	0x33c53e56, 0xbb7ac5da, 0x317d27bd, 0x7d1bae26, 0x17be4971, 0xfa2e90cc,
-	0xefe2e3e2, 0x4b7e2fa5, 0x54b196dd, 0x578edfae, 0xa4fecdd7, 0x298de83f,
-	0x81478efc, 0xbae8da8f, 0x47c18e69, 0xc5a3bada, 0x1ca88a01, 0xc5381ea3,
-	0x5ca663f6, 0x91fe274c, 0x0e80719d, 0x12ed423d, 0xa97b0c77, 0xe51b3e35,
-	0x68ef43ab, 0x2eca257a, 0xb87ef311, 0xda85325d, 0xc02e52a3, 0x2be10fd7,
-	0x2925ef52, 0x882b8482, 0xc19da61f, 0xa0579038, 0xcfae2cfe, 0x817f224f,
-	0x3b12e3fe, 0xaf68c3e5, 0x0ae87168, 0xe94f6697, 0x1e23a5f9, 0xc3dd9339,
-	0x1149f1aa, 0x7fe413e0, 0x04fb8f26, 0x7fd41bff, 0x8000b303, 0x00008000,
-	0x00088b1f, 0x00000000, 0x7cc5ff00, 0x55547809, 0xf579f096, 0x55492d5e,
-	0x146caa92, 0xb612f08b, 0x84582484, 0x5916ec80, 0xa014a358, 0x8168cb80,
-	0x9a126b0b, 0x69ee9c71, 0x0242a6ff, 0x83b74343, 0xe8cedad2, 0x3ad857f4,
-	0x08b41a83, 0xd09d0301, 0x584c5015, 0xf82e0834, 0x1a6d1ad9, 0x84490ed1,
-	0xbfbb46d6, 0x739cffcf, 0x2aaa4bef, 0xffff4d85, 0xb49fdf3f, 0xdeefb97d,
-	0x67b9ef77, 0x979ee73f, 0xb3559bdb, 0xf6e008ad, 0x14078a99, 0x77f1d000,
-	0xe042c022, 0xadacc37f, 0xc78ef016, 0x69fcd7be, 0xe7f80d87, 0x9c2ffc3b,
-	0xa42cfc90, 0x900bcf50, 0xce54b009, 0x7d57fc5f, 0x3c5e3d33, 0x52fe7a27,
-	0x92b9fd98, 0xf81b700c, 0xf71c30cd, 0xff8ec5f3, 0xc7154bec, 0x7e8b2e97,
-	0x4a4ce99e, 0xff8790bf, 0xbe230118, 0xd4ca0153, 0x22b79dba, 0x5527ddbc,
-	0x334c558f, 0x390ffed1, 0x350ffec5, 0x7c800c97, 0x1674df80, 0x3db1f8a7,
-	0x1c2111b6, 0xd1bad00d, 0xec71edc6, 0xefc5f107, 0x3c66e7e8, 0x21fc059f,
-	0x52b4b607, 0x4801b721, 0xc4ed1805, 0xff602745, 0x0d3f9e2a, 0xc02486c7,
-	0x5c2473ef, 0xe7af00d9, 0xf104e798, 0x5eb8c3bd, 0xe30dd700, 0xf75c01fa,
-	0xf72746c8, 0xe6e8db5f, 0x442e0dfe, 0xfac0066a, 0x37af2714, 0x8776f72f,
-	0xe35bdf1f, 0x50e7e6cc, 0xf844da3e, 0x7b2fe036, 0x1004086a, 0xac77afdf,
-	0x807494d0, 0xb1e2b72a, 0x01d1f566, 0x8e58e34f, 0xbe25cbf3, 0x102ab72b,
-	0x1fe5e7c4, 0xc4072bae, 0xee33575f, 0x2aa9f887, 0xfc368355, 0x63d34967,
-	0x0cdf453b, 0xdefa08d6, 0x33028e22, 0x86cd16b5, 0x28f02cfb, 0xf1f7151e,
-	0x6ff78936, 0x1d412af5, 0x278b79ff, 0x63871e9a, 0xae58bee8, 0x0ffe80b3,
-	0x47305bdf, 0x9d718609, 0xdfa29305, 0xd6757c5b, 0xfed8cae7, 0xe898b47c,
-	0xbf3fb63e, 0xb7744edc, 0xc1863fe3, 0x95fba230, 0x8d6fa58b, 0xc5ba3e85,
-	0x8e74b1b6, 0x9d16bf1d, 0x673a27ef, 0xc6ce9b5c, 0xce8b7ffb, 0x904e110f,
-	0x1bf470be, 0x30049e8b, 0x1a07e9bb, 0x55f679d1, 0x32add78d, 0x861433ce,
-	0xd4fe79d2, 0xb76ff859, 0xaafcdf42, 0xfe2d2fa6, 0xe79f6b82, 0x22bfed6f,
-	0x69fde745, 0xdf7e6f5f, 0x8034f3be, 0xf9ce78c1, 0x8df8d139, 0xbd2c6ba5,
-	0x62f7ca16, 0xe635b5e9, 0xa05d061c, 0x60689913, 0x555fbc1c, 0xd16b8e19,
-	0x162e97ad, 0x7e4f08ff, 0x5f8071ff, 0xd6fab9f3, 0x76827493, 0xe02057cd,
-	0x03c84732, 0x052075f2, 0x0ade5be9, 0xec0444e1, 0x3e738b96, 0x28f5a8d7,
-	0x39c469f0, 0x8353e7e8, 0xfadf6ace, 0xb2075765, 0x96fb19fc, 0x14b01069,
-	0x972173d2, 0xd255f0b1, 0x7e69233a, 0xcb68f980, 0x10b2d32e, 0x05ba639e,
-	0x9b51f5ee, 0x4e03da28, 0x9d1a07a1, 0xfbb75e26, 0x6e099b2b, 0xf0e57804,
-	0xf8406280, 0x09e7563c, 0x33218bd2, 0xc945fbf0, 0x9cdfcf3a, 0xdc048104,
-	0x9b76b41f, 0x2b44f90f, 0x3941c806, 0x825906d3, 0x9d64b835, 0xdc91f616,
-	0xa8347b75, 0xd1bbb946, 0xe048ef78, 0x6c92402e, 0xa99474fe, 0x0fde8b26,
-	0x79c54fb7, 0xfa6a1537, 0xb2e29c36, 0xf1a03fea, 0x93ab66ae, 0xf83eebde,
-	0x5a662dcf, 0x20f02be7, 0x335af084, 0x4f8e1532, 0xa4839873, 0x93d4ca37,
-	0xddfb09aa, 0x8fa4003d, 0x970b2da6, 0x3a6dd200, 0xb138d7b4, 0x8c74429d,
-	0xd0bfbf43, 0xde843379, 0x9a74881a, 0x4334e921, 0x6692abea, 0x4946f595,
-	0xac841a92, 0xb374fd3e, 0x408cd1a4, 0xee0a497b, 0x3c53433b, 0xf9bfd835,
-	0x8fc516aa, 0xba3e932f, 0x951f4fb1, 0x3dbdf5c9, 0x019686ba, 0xff344266,
-	0x3d0a3596, 0x798b6254, 0xbe0fed2e, 0xe6557cc9, 0x429f1e8c, 0xfbf913ba,
-	0x825e8c62, 0xa653fb18, 0x03b935fe, 0xc58af0f1, 0x8454defb, 0x19b4e7bb,
-	0x70e7c59e, 0xfb933b11, 0xc631a7e3, 0x07b6c51e, 0x757a270f, 0xe215eb84,
-	0x07f50723, 0xd7b1f579, 0xa3b63f9e, 0xf18e98a7, 0x0d22dd4a, 0xcf2d99b2,
-	0xf0fb33ba, 0x92bf0fde, 0xad78b10e, 0xdbde7a97, 0x8e8d7ce8, 0xad8f0fdb,
-	0x979ed8b3, 0x48d749fc, 0xf8bdfdf5, 0x95e5e434, 0xe25e890b, 0x0c2e57ff,
-	0x4afdb2f2, 0x0c3e59d2, 0xfe783879, 0x51e92272, 0x21aea7c4, 0x6cb8f49f,
-	0x9f99679e, 0x06841c85, 0xc36e0a8e, 0xc12485fe, 0xf624aff7, 0xbc23cf1c,
-	0x3cf262df, 0xeb68db4b, 0x202a2f87, 0xd175b9fd, 0xe2803379, 0x2887e505,
-	0x84ee8a4f, 0xa00db1bb, 0x05ff113c, 0x72482152, 0xd0108662, 0x785e35be,
-	0xd319da9a, 0xfbc214f4, 0xddb35c65, 0x29e9eb41, 0xd7f0f7c4, 0x057d132b,
-	0xbf5ff1fd, 0xee1a7c11, 0xe6d1b0d3, 0x1c2f50d3, 0x7ee4e8d8, 0xb73746e3,
-	0xdcea3687, 0xfc913a6e, 0xaa1ff243, 0x169f16bc, 0xa5e657a1, 0x0330fd0a,
-	0x35c10ef5, 0x00609403, 0x23c66f79, 0x7288f2c0, 0x10a4dc10, 0x393cf0bd,
-	0xfa44f87d, 0xe888ee5c, 0x3b56ad43, 0x82a59321, 0x67985ee9, 0x09d1f7e2,
-	0xd59f3e08, 0x3fd23e7f, 0xfc8cbfaa, 0xefc38416, 0xb0b996f2, 0xb37c390d,
-	0x7adf885d, 0x4bd1e965, 0xf4b9fdc0, 0x43b95ebc, 0x8feb84bd, 0x1f84cf0f,
-	0x8f18bda2, 0xe2bc2184, 0xff045dcf, 0x100b1684, 0xb2b0d07d, 0xf21a167c,
-	0x5ca2b5f9, 0x8448fdc0, 0xef8c1bbe, 0xc4c3cb59, 0x23a0074f, 0x645ef08d,
-	0x7e49d9f3, 0x3f04b997, 0xdddb9578, 0x3937ae0a, 0x0951e2c3, 0xf1bee1b4,
-	0x2d7f11eb, 0xce21b819, 0x1cc9696f, 0xb713e7a2, 0xc93ef1bd, 0x08e6d7b7,
-	0xcc986cab, 0xf6111d9d, 0xe33c007c, 0x74927f24, 0x476877dc, 0x0e4e3f5a,
-	0x6abb9eb0, 0x6b5e9209, 0x09ec933d, 0xafd33ee3, 0xacbfd8da, 0x6e5117a7,
-	0x8f26270f, 0x42133d65, 0x63f2430d, 0x6d98e713, 0x3c23aff6, 0x7a3e65a0,
-	0xedfbdf0a, 0xafd20065, 0x543fdbd3, 0x312d0fc9, 0x40e80ee5, 0xa32a8f38,
-	0xf27da853, 0x6e7ce4e3, 0x127724cf, 0xec9b0e7e, 0xcefbed3a, 0x0474bd46,
-	0x8da9cbf2, 0xf9023a50, 0x368dade3, 0x746f4f6e, 0xa3667b72, 0x38a3db9b,
-	0x3af3fc4e, 0xbd7f138e, 0x6fd4e381, 0x4f6a71c3, 0x7ad43ae0, 0x489872df,
-	0xe5bc677e, 0xbc2da8d0, 0xfadb892b, 0x742c933b, 0x50c9c38e, 0xfc4fec67,
-	0x370c4e14, 0x2ee50780, 0xdb53fdd5, 0xad3f680d, 0x1c6502fe, 0xf754d4c0,
-	0xae3a6d5c, 0x8fe87b3b, 0x19f1c2be, 0x6a7ec3a9, 0x3b6f7843, 0x893868e3,
-	0xf5c7d2fd, 0x3f883a9f, 0x92a2244f, 0xb7643c24, 0xc7365179, 0xc418d293,
-	0x24c2f768, 0xfd19a7ec, 0xc8a5b9ec, 0x3a4a4b0a, 0xb005c0f2, 0x73e1b1f3,
-	0x25df886d, 0x513fff76, 0x9b6812df, 0xfa9d3a53, 0xbc927010, 0xcb20e62b,
-	0x7d2510fb, 0xadbfda11, 0xd4c4ff0e, 0xabc07f08, 0xf48d21fc, 0x02af44c3,
-	0x77a674ae, 0xf7d2a470, 0xd5b798dc, 0x15313651, 0x2ed7f7f9, 0xc269f995,
-	0x741bc534, 0x635f97f4, 0x7af384de, 0xe26fd129, 0xd4b559c5, 0xe2e3982e,
-	0x4dd96fbe, 0xa5ff24b5, 0x5fbd6b8e, 0x5c87efc2, 0xc547d666, 0x638bce1a,
-	0xe3798d17, 0xffc8c991, 0x0c4b69ee, 0x7d7c4b3e, 0x84935fd6, 0x567732fd,
-	0x34752aa1, 0x6bb5df70, 0xbf978d1b, 0xe572c0de, 0x59e8f249, 0xa5ed8ac4,
-	0xd33e3869, 0x24c278a1, 0xa93ed32a, 0xa771a34d, 0xcdb421e2, 0x553b8ef4,
-	0x5423e344, 0x9fea4ccf, 0xd89d4bd5, 0x4e66d19e, 0x66f384bd, 0x6c78a4e7,
-	0xf099def8, 0xff10ae8f, 0xf249ccce, 0x1714e824, 0xa4ae9f04, 0xa9eac7be,
-	0x8f1ce9d6, 0x3ad32495, 0x6131e2ba, 0x92d6febf, 0x147045ff, 0x514052fb,
-	0x91a5dc68, 0xc7e4fb1f, 0xe275293f, 0x0aa1fabc, 0x099cfc90, 0xe091fee7,
-	0xa89ad99f, 0xf5402027, 0xbd296716, 0x9c516f57, 0x2befb89b, 0x5181f9a1,
-	0x5c79fd66, 0x769de4f7, 0x6fe507b6, 0x745fb3e5, 0x6cc1cef2, 0x9adfca17,
-	0x49ed4c56, 0xcbdbf093, 0xc39f2adf, 0x930826e3, 0xebbf2952, 0x1dbdf81f,
-	0x4d293f25, 0x0c4ff5c7, 0x416eb173, 0x116a953a, 0x83e70d7a, 0x55dfef42,
-	0x945bf3c1, 0x8f3a3f01, 0xa7e4aff3, 0xff715a14, 0x5109e959, 0x710ce7f3,
-	0x8de7f545, 0x45aa5818, 0xfcf2b1d8, 0xadfea8ac, 0x88e94a45, 0x69bef988,
-	0x45fd5109, 0x11d2aea5, 0x2b6ff311, 0x5fd5181f, 0x54565b72, 0xb269a67f,
-	0xa11b1fd0, 0x7dc854bc, 0x9bfb2979, 0x0a87acd9, 0x1bee629d, 0x8e3f7e38,
-	0x7f09b617, 0xfe85d0aa, 0xb4a5d214, 0x80fd88ad, 0xc68f7c36, 0x8f52ec8b,
-	0x3ddda005, 0xfc80ec91, 0xf62fe209, 0x6677658b, 0x6305fa3b, 0xb768ae89,
-	0x752fe023, 0xfaf1db44, 0xcc27e144, 0x0bad7f01, 0x75a739e9, 0x6557fb1e,
-	0x6145d5e9, 0xbf467c20, 0x2a370b1f, 0x13779dd1, 0xac6ab61f, 0x890ce737,
-	0xd4adafd9, 0xf48c7ec1, 0xb7c8e6ef, 0xe0217d8c, 0xc6ff276d, 0xffb18738,
-	0x4733ceb5, 0xe17ec69d, 0xacd73adf, 0xa9a5859c, 0xcf5fe171, 0x9c2c4cfe,
-	0x4f32a979, 0xfb15fe81, 0xeca9ad85, 0x7a4fe22f, 0xf0c13f3c, 0xcf51ca7f,
-	0x9cf522b9, 0x585f4943, 0x673d6d70, 0xff2d7bac, 0x78d758cf, 0xde54ea1f,
-	0xf7bf78df, 0x7fc4aeb9, 0x27e71bbe, 0xae9e79c5, 0x5cfe7fc4, 0x9a19fcf4,
-	0x7940e35e, 0x278a0e3e, 0xa93f7840, 0x959ae46b, 0x52d6f59c, 0x5fa1f65b,
-	0xf670b723, 0xb52d40f9, 0x27833b53, 0xb9fe78ad, 0xf94eaa39, 0xea2fc307,
-	0x0aa56717, 0x55f8e47f, 0x78e3aedd, 0x53b7407d, 0x88ff51dc, 0xaaf8a76e,
-	0x28730bde, 0x370ef48e, 0xc438a7ad, 0xf62d879b, 0xfa154def, 0xdf7c857e,
-	0xfea90f68, 0x857f0415, 0xf251e3ad, 0xe9bf2a49, 0x1c5f10b1, 0xbf2f7f27,
-	0x5c77bfbf, 0xbf683a0b, 0x1d048fe3, 0x7e7d08be, 0x22defebd, 0xe20ca662,
-	0xa917c553, 0x096c4a4f, 0x51fd48be, 0xf54574e6, 0x83ff93c7, 0x0f76cdef,
-	0xae6f7a8c, 0x0f35159e, 0xf21cd8fd, 0x902c6a87, 0x353e91a3, 0xcfc87a25,
-	0xefe3c58b, 0x0e3df9e5, 0x6051b927, 0x7f55d74e, 0x29e4fb1c, 0x7d8bf811,
-	0xc4553dbe, 0x9ec88373, 0x52273ae3, 0x556b6e75, 0xd0e6709f, 0x887e267f,
-	0xbaac63ed, 0x95c3d68c, 0x1e77c4dd, 0xba0ae9bb, 0xe3d2f0e0, 0x686ae7f3,
-	0x4de33dff, 0xfb1c38ff, 0x215f1ec7, 0xfb4d53fa, 0xfadfb1b2, 0x7fa27df8,
-	0xd9bc69a3, 0xb819ec83, 0xf9296e7f, 0x7fbee90b, 0x9b75fa27, 0xd4155b1d,
-	0xa8099503, 0x4cd5b0d7, 0xf7a6140a, 0x2ddbc7c5, 0xc0915f68, 0x175e6cc8,
-	0x156ec0d2, 0xc26574f1, 0x13d920d0, 0x13abd8ad, 0x0c132ade, 0x9264777a,
-	0x09da879d, 0xdd9d7151, 0xfbe1ef82, 0x0bff3665, 0xc9c26f82, 0x87a5ea3a,
-	0x200d960e, 0xea9138fe, 0xede43c64, 0x7d26ea9b, 0x21edf085, 0x01fffefb,
-	0xf078e6be, 0x3ec59ad5, 0x2579f59d, 0x86f38f64, 0x3e947921, 0x3a6a15fa,
-	0x21084f3f, 0xeebfb0ef, 0xb1fe5375, 0x90f165c6, 0xf2427eff, 0x35b6f5ef,
-	0xdaa18f32, 0x29a91f05, 0xb17bf5a6, 0xcff25b7d, 0x6a2fb919, 0x910ba1be,
-	0x33d9c03f, 0xe8815174, 0x6aa87f13, 0xe1f90f61, 0xe490ff3d, 0x83f9f8a1,
-	0x183f8144, 0x8fd1f3d2, 0x777bf9f1, 0xf1b679e7, 0x65a78173, 0x0e9aecc1,
-	0x06b38fec, 0xe3fca06f, 0x47ff34a1, 0xad3b8784, 0x87cc91c1, 0xb449f58e,
-	0x8e05e28f, 0x0ff88c53, 0x32dd3ce3, 0x705c7fbc, 0x46c1fded, 0x64e96576,
-	0x7f637781, 0xe88db1c4, 0xf124def1, 0xe10780dc, 0x303e26e8, 0x0785eae0,
-	0x8f393886, 0xd4ff2200, 0x2e8be325, 0xa7ec8f5a, 0xdc7910ea, 0xff38983f,
-	0x8ac24552, 0x4de77dfd, 0x791a0f1c, 0xfb1022e0, 0x49b53e4d, 0xf803e065,
-	0x96a2513b, 0xcb5c695e, 0x7684fdf1, 0xf6fe262d, 0x2a9d3db2, 0xd5a9bfdf,
-	0xf6a0e25f, 0x5379e8fd, 0x093f1c65, 0x59c52a82, 0xc6623b93, 0x467fe71b,
-	0x18bd4feb, 0x4d293cfd, 0x3041c3da, 0xb24f3228, 0x974dc641, 0x10a7664f,
-	0x2b186b1f, 0x8b0f48a8, 0xd4a4c2ae, 0xb0d33d3e, 0x4959e711, 0x2db8da9f,
-	0x8fbceb38, 0x88dc69f6, 0xf49a3f0c, 0x435b9baa, 0xc2ce0aee, 0x623630bd,
-	0x0617291f, 0x2fbf2f1e, 0x23ae38f0, 0xb0d397e7, 0x43356e6f, 0xc3c3ef50,
-	0x0c2f8914, 0xbbfe38df, 0xf6c1d17c, 0x62db626b, 0xead9e495, 0x711e8136,
-	0x113d04be, 0x6c7d08f4, 0xea8d49cf, 0xb59e92ab, 0xca7ed109, 0x924fb978,
-	0x7ad45067, 0xd062bf86, 0xacea50f3, 0xc663f256, 0xdfb1563b, 0x3b293292,
-	0x93a2fd6a, 0x042ef8d1, 0x63e2979f, 0x71c087cf, 0x5ab3c4c0, 0x29327f94,
-	0x63f983bc, 0xcfd187d2, 0xee8f9ca7, 0xfcc9a697, 0xaedd2c56, 0xfb184f85,
-	0x7fe969cb, 0xde5d3e3f, 0xcda67c68, 0x8667c689, 0x039f1a2f, 0x6be34596,
-	0x1f1a3fa0, 0x898d5783, 0x7d61bf1a, 0xd87f5461, 0xcd44a70f, 0x198342cf,
-	0x75be1fd9, 0x91fcd45e, 0xf545163b, 0x67753f47, 0xe0dcfcd4, 0xbcf1a88a,
-	0x2efe6bdd, 0x368417fa, 0x3427cd44, 0xfe87be9b, 0x4bfe3637, 0x53ff7ed4,
-	0xa18daff4, 0xe7d256ff, 0xa85e8813, 0xecfb0b37, 0xa425b919, 0x6f4d5d3f,
-	0x9b79437c, 0xf9ceb140, 0xf03cc0aa, 0x2fd8e0d4, 0x7a429f54, 0xdaa2306e,
-	0xd6a37a84, 0x1ec8ab04, 0x71326a3c, 0xf390d31e, 0x3f84d317, 0xc89a62f2,
-	0x7b78197b, 0xd922ed1a, 0x43ea5541, 0x248efa73, 0x935453f2, 0xfec9da09,
-	0x1fd61e69, 0xbe101ce7, 0x0755f719, 0x4ac5e701, 0x982d2792, 0xbea8fc88,
-	0xa9fc72a9, 0x8e83f20e, 0xe4e6a4f6, 0x9f8453ce, 0x4e9b0e2b, 0xfaa6ab7c,
-	0xf0df6403, 0xa1e7a19c, 0xdef39fbf, 0xf1495846, 0xe65fd196, 0xe699bf5e,
-	0xe67bbb2f, 0x7b7f8a48, 0xacaddf9f, 0x43a08d2c, 0xc51739e4, 0xa40eabf1,
-	0xd867fb09, 0xdc7ec313, 0x3a6bd569, 0x538c3ed0, 0xbb407d85, 0xf10d2071,
-	0x88f281f1, 0x0169f859, 0xed1f9d33, 0xb827df2a, 0x80df21d0, 0xdd9f4a6d,
-	0xe643bfd2, 0xda3b20fa, 0x00937d6f, 0xf74438a3, 0x1de33df0, 0x955dfe86,
-	0xecbbf8cb, 0xf97f9e88, 0xaf02e1fe, 0x90f620f7, 0xe22ce70e, 0x17fc063c,
-	0x42fe5ea5, 0xd24ee5ea, 0xebf911c7, 0x2676bb55, 0x2e7e7f91, 0xc6e3f847,
-	0x3a49dff3, 0xe54d2eff, 0x9dddaff3, 0x047cfeb0, 0xae422ade, 0xe3557ea8,
-	0xf991f5c0, 0x39c6b5cd, 0xe7468afc, 0xa8e52758, 0xf923b5a2, 0xfe7f604e,
-	0xb75c34c3, 0x7b95d772, 0xa6fbd00e, 0x67614c9e, 0xd2dfbc03, 0x82e380f7,
-	0x28817fa5, 0xcd33b6bf, 0xa67570cc, 0x09613889, 0xbbe44e36, 0xb803e825,
-	0xda637da8, 0x7c3fe22c, 0xbfb0561e, 0xa4cc15a0, 0xb3fa16bf, 0x33f484cc,
-	0x3f6779e0, 0x69cfed1e, 0x1b73ef3a, 0xfb7ef8f8, 0x922a7bdd, 0xd6340fd8,
-	0x8141d633, 0x3def3f20, 0x499cc057, 0x0ae99f79, 0x9fb817fb, 0xeefb9e8d,
-	0xec99bc1e, 0xbbdfb1b0, 0x0ef4bfe0, 0xf022c5f2, 0xfac6baf0, 0x1134d740,
-	0x4b03f97a, 0x44ed1d2f, 0xa66d0dbf, 0x3685e530, 0xbdf2b39c, 0xcf75774a,
-	0x9c230fcb, 0x66f9af1f, 0x7f7082bf, 0xbfe7bcb4, 0x3bf3e00e, 0x4741529e,
-	0xfdd9f1be, 0xbc447a5a, 0x2bfeee79, 0xafe86f2c, 0x2924ff3c, 0x1eac97a5,
-	0xd60f9392, 0x322a34bc, 0x9f4e485e, 0xf74e9099, 0xe2d2933b, 0xc6c46fde,
-	0x3f886ba5, 0xf6757e59, 0x5cbe0d4b, 0xc372f92d, 0xf9f9a30b, 0xf3dea486,
-	0x2af3fe88, 0x3436c1e7, 0xf1af395b, 0x3587e48e, 0x31337e2f, 0x8f57cf32,
-	0xa95ba97c, 0xf74b7275, 0x09fa3aa6, 0x1e5e4efb, 0xeaab71cb, 0x1e73a2cf,
-	0x3269fabe, 0xf9bdf7f5, 0x6e079f2d, 0xbbf83ebb, 0x78917911, 0x79ea4aae,
-	0xc54af497, 0xf94eab01, 0xb90392ac, 0x7ec2ee27, 0x1fea2b65, 0x5725cf3c,
-	0x29a7b1c7, 0x00a83b1e, 0xc32ab7e5, 0x2be4ac09, 0xe520941b, 0xee34d6c3,
-	0xfb1832dd, 0x1616ea6b, 0x2556bb11, 0x59567d0b, 0xb13704af, 0xe9873e1f,
-	0xa365285c, 0xbfee50e4, 0xd778e3e5, 0x85feb171, 0x3cf6b08d, 0xf55d9dc6,
-	0x38205e5f, 0x395a35d6, 0x292176cf, 0xfb8c196c, 0x84abda5e, 0xdc9f7a02,
-	0x1c44b976, 0x98f42ab6, 0xf55df685, 0xe411c2dc, 0x381d7636, 0xb93d216d,
-	0x59b1e1aa, 0x309179f2, 0x8b9641ff, 0x9595bbb5, 0xd5ac7991, 0xa4420ee8,
-	0x02f842fd, 0x40eafb13, 0x2cfa494e, 0x435e1a6b, 0xb6bd42e8, 0xf58569ff,
-	0x97e242da, 0xf9ef0e0f, 0xdf686fdd, 0x923dff83, 0x7d745ff1, 0x805f07f8,
-	0xb94a8bfd, 0x633c5c0f, 0xb2b2f8a1, 0xde217cc1, 0xba6352fd, 0xcfda1eef,
-	0xfd638f88, 0x10162dee, 0x10d93ff7, 0x82ec9e7c, 0x1cb2c7a3, 0x9a57f9e1,
-	0xce68f080, 0xec0acb1e, 0xc8ce48db, 0xc11db85e, 0xbef57178, 0x84f18d74,
-	0x78fac4b1, 0x3921a0f7, 0x5877a25e, 0xe9579f28, 0x5f10b4ee, 0x173f8657,
-	0x9f8dfff7, 0x89c6f2cc, 0x574e5fb7, 0x273f33a4, 0x6437de4a, 0x30b9618c,
-	0x90c3daf7, 0x60bee58d, 0xa9d90f45, 0x3b91070d, 0xbfb7a214, 0xec0ee087,
-	0x7ce9d04f, 0x9f3e0725, 0xcfb111d8, 0xf47ca51f, 0xf95e59e6, 0xf099ac64,
-	0xb193efb9, 0xf3df525a, 0xaac74cae, 0x97997978, 0xdedd85d3, 0x18bbec9c,
-	0x9e09072d, 0xd95bee30, 0x147be764, 0x2d2d8394, 0x70729145, 0xc45daac7,
-	0x07aa4de7, 0x1b2a0225, 0x79abfa17, 0xc887927e, 0x0cce36a3, 0x4eaa1f10,
-	0xfc27f31f, 0x289bf715, 0xff508fef, 0x3ff74dcd, 0x39ac724d, 0x1e646560,
-	0xf1d4d2a4, 0xe88516ab, 0xa26bc3ba, 0xf5810afd, 0x75f0ea96, 0x94553c70,
-	0x7bdc53a9, 0x202cc274, 0x59bcfd3c, 0x39afbce1, 0x8b35bfd5, 0xe55c7be8,
-	0x2fa396f9, 0xbbbee804, 0x11141c6b, 0x7f79c67c, 0x2a0c2e3e, 0x00b9b3ae,
-	0xe6edb43c, 0xc4dd4b83, 0x38cf3fbf, 0xdd867ec6, 0x2bd20213, 0x503fe835,
-	0x1f9ec7de, 0x093ad30a, 0x1522be39, 0xee9359f7, 0x58b4be64, 0x27ca1efd,
-	0x36fb203d, 0xe08ab7cd, 0x8a27a5b3, 0xf5c87bf8, 0x48baf9e5, 0x6f74cdfe,
-	0x4b7ce7e9, 0x69f05997, 0x71c00dd7, 0x4cfcd722, 0xe32f21a6, 0xb83b06cd,
-	0xd6546aad, 0x44d7da46, 0x79e8dbf0, 0x1ea5c1d7, 0x2d9cdf82, 0x91333df9,
-	0xff7622e5, 0xa99f888f, 0x62b4c0ce, 0x99e1166b, 0x9ff7a6f0, 0x7be4a1f7,
-	0xf9a01f03, 0x115e4873, 0xfcbc6f54, 0xf8bd3f92, 0x7375d12c, 0x95c72faa,
-	0xc2bcd7cf, 0xc6277629, 0xff9c3b95, 0x31b7c901, 0x89f095bf, 0xfcd16fef,
-	0x51efc236, 0xc5b35f89, 0xfe593ba7, 0xdfed3a7d, 0xf141be7b, 0x3c8df7cf,
-	0xff6c96df, 0xcfef9ef7, 0x54e67cf2, 0x2f5a37e4, 0x399e7819, 0xfe201839,
-	0xa2824dab, 0xa8f8f84d, 0xe49b966b, 0x6f91cb6e, 0xd7bc9286, 0x40dc7926,
-	0x9be6b179, 0x6fdc9196, 0xf3277419, 0xe42f17ff, 0xfb11aa16, 0x7f17a724,
-	0x2f3be745, 0xe2c5b1cf, 0x7c73a1cf, 0x9c69cf2c, 0xefba496b, 0xf911e92f,
-	0x7e921826, 0xd7b3fc5d, 0x7194d7b8, 0x61da479e, 0x8f38f38c, 0x5c890dd8,
-	0xfa57b67f, 0x98f81ae1, 0xd1e0ec7f, 0xc2f2bfd9, 0xa92baa09, 0x36c13169,
-	0xb5253e3a, 0x92fdee22, 0x0c119355, 0xb2186d7a, 0x8d3435d3, 0x39d89f3b,
-	0x3ee116af, 0xf8550108, 0x0cf9d169, 0x255e2af0, 0xdaf18f32, 0x63cbeb9a,
-	0x21afe33c, 0x63cd8d79, 0x969b0e4c, 0x23ae525b, 0xbcdaf19f, 0xd18cf9b8,
-	0x5171d119, 0xc0ce8641, 0x7f047285, 0x4189c286, 0xf1833791, 0x26eabf94,
-	0x9fe3855b, 0xde5999e3, 0x9b1cae95, 0x13e0ed0b, 0x3adb6c4f, 0x8470e50d,
-	0x6bf503c0, 0xf1f5c988, 0xe6f507ec, 0xc31b5e47, 0x3dea387e, 0x4e02f395,
-	0x1d0c4b09, 0x137fd08b, 0x2a27a541, 0xf63e12bf, 0xdbf1326d, 0x2dfd549e,
-	0x9b4f4fa2, 0x092875ca, 0x15c5875a, 0x900eee47, 0xe076807f, 0x3e84339f,
-	0x7b8a35b7, 0x65ee9b4b, 0x74e0993d, 0xe423538e, 0xd8432f24, 0x1f638aa5,
-	0x2ca0b50c, 0x4c9d325d, 0xd7f5c7ce, 0xa64fafed, 0x73dade34, 0xd2a44f6f,
-	0xff353b9f, 0xff3c0c82, 0x51aeca17, 0xb75bf236, 0x7e12c706, 0xae6ce142,
-	0x20d02ccf, 0x87f615a0, 0x3c29eaa7, 0x9504ba14, 0x5b71a54f, 0x257e34d0,
-	0x58555ff1, 0x30f6979c, 0x6dcc8aa3, 0xd5dfb854, 0xeb4a9358, 0x79b6fd55,
-	0x97afe910, 0xf39f8432, 0xf13cd5e2, 0xcd1a06be, 0x25c33fbf, 0xa2682a99,
-	0x324be37c, 0x5575d94f, 0xfec679e5, 0x55338d05, 0x7e41f227, 0xce11c778,
-	0x7559368b, 0x73c26fa2, 0x94d1f020, 0xd5687ec0, 0x7640d9e1, 0x1e05dbaf,
-	0x24f7c705, 0xfc447cf6, 0xd56cd3d0, 0xc1373ee9, 0x715203b9, 0x1eb23dfd,
-	0xb619172c, 0xdcf7d1de, 0xe9a12fd8, 0x24439497, 0xe57be0be, 0x4c076d04,
-	0x3be24477, 0xc959d849, 0xc3127b57, 0xe967ba26, 0x59efdf41, 0x4e0fab86,
-	0x380d7de0, 0xec0ed973, 0xf85cf4b1, 0xe5c33a71, 0x05c83e24, 0x8d342701,
-	0x26af49d6, 0x8e7cbd38, 0x09eea704, 0xaae1fd28, 0x208e8b1a, 0xa4a3cfca,
-	0xc9f4a6cc, 0x5f625577, 0xb0b286df, 0xfca41b27, 0x9d2b6eb7, 0x8547d916,
-	0xfdefa933, 0xf8e278ff, 0x9c21dab6, 0x48a80bff, 0x49b63b7f, 0x214e74a9,
-	0xde122857, 0x0781428c, 0xdbb40baa, 0x7cef78c4, 0x2a4773e4, 0xe79e7fdb,
-	0xf3ed3ab1, 0xf85e58b2, 0x0ff0d17e, 0x17c2521f, 0x76d2466e, 0xc94be63e,
-	0x9a7573c7, 0x875c3c8e, 0x3cb8fef3, 0xfd8c2a34, 0x79ffab16, 0x3f57cfe2,
-	0x80bdb15c, 0xb31eeff4, 0x4ff49ca7, 0xf671e047, 0xeb345fcb, 0x0ee422db,
-	0x7264f486, 0x3ecc61dd, 0x3d36e755, 0xf776fe4e, 0xfba74541, 0xcf736ef4,
-	0xb2bb8250, 0xd50b33e9, 0xfc1d5663, 0xb2ebfd84, 0xda5eff4c, 0x3563526f,
-	0x864dcfd7, 0x873f5c1d, 0x20eb917a, 0x4fa16e43, 0xf51d9f2e, 0x1d04756c,
-	0x06f293de, 0x6461fe3d, 0xbca49abf, 0x1c38a61e, 0x772dfddb, 0xf7f5a70c,
-	0xf180fccb, 0x191c355e, 0x04df784c, 0x3c6b71af, 0x5c6a0eef, 0xaef79cbf,
-	0xc46f5eed, 0xfe52d3fc, 0x56fdcb4f, 0x20dffa67, 0x7cb6d778, 0xc2d2a16a,
-	0xa1a1f3aa, 0x3486f714, 0x4719c53d, 0x6fcaf48f, 0x69553c8c, 0x5f9a163d,
-	0xaf581175, 0x536bbd20, 0xbd2f7e90, 0x396638db, 0x348fdf3e, 0x8b3b2149,
-	0xe3d92af1, 0x60df66fd, 0xcefd5f9a, 0x8f4963d7, 0xf020241d, 0xaf375f7f,
-	0x4378461d, 0x244e2ffe, 0xac0bdb39, 0xcd390cd7, 0xf7c53927, 0x8bff89f3,
-	0x7acb9fa8, 0x7da58f79, 0x7ee5cb1e, 0x225c9013, 0x203cb3ff, 0xdfc93bff,
-	0x3ca277cb, 0x59a3fbf0, 0x9bb4f7ce, 0xa337ecbc, 0xfdc91f5e, 0xdfd4c5e2,
-	0x64ea5ed3, 0x843aa739, 0xf0d79242, 0x04275e11, 0x45f2d740, 0xfd22f80a,
-	0x648cbcff, 0xf1242f71, 0xd8433939, 0x9e8e5083, 0xd873c1e2, 0x3e4a3555,
-	0xe8a5ec22, 0x9a5a7b4b, 0xbf6d97f9, 0x26524698, 0xda5384ed, 0xd678ff49,
-	0x6d28fffb, 0xa7d786d5, 0x73c3a82c, 0xf2a5386e, 0xf71961f8, 0x1c9f2585,
-	0xb21af991, 0xa89a7a1b, 0x13e7a61f, 0xe5f54fb0, 0x4bebbd13, 0x9a4d1cc8,
-	0xb528e3b3, 0x12a17c53, 0x2da6db72, 0x166a3f6b, 0xfc479e62, 0x6e6470d7,
-	0x75e3d51e, 0x0242b39f, 0x6df0d882, 0x222f47cf, 0x8c3e1e1e, 0xa7638ff8,
-	0x7fcc38f0, 0x060d7fe8, 0x6ef1ff77, 0x4091ea45, 0xc7e27cd2, 0xafb506ae,
-	0x2254808f, 0xfddf5363, 0x007b7da4, 0x677fe76d, 0x2267077a, 0xf00ccf3e,
-	0xfa7ddb73, 0xcb124cdb, 0x5c4567fd, 0xe6f160df, 0x6434ff11, 0x871ba863,
-	0x2299ad4f, 0x856453ef, 0x379cf7b8, 0x18390a67, 0x0aed8015, 0x33aaebc7,
-	0xd4bf7488, 0xe82d7aa0, 0xc0845d2f, 0x6fa4a992, 0x01f75e64, 0xfc5e3f90,
-	0x283cfa45, 0xdf900fbb, 0xc1eb7682, 0x11d6c45f, 0x316fd978, 0xeb0058f2,
-	0x2b5fc44d, 0x0ff8149b, 0x67aac5c4, 0x93afe7a2, 0x1babf275, 0x8c1b1d77,
-	0x5cf35d74, 0x2df938cc, 0xe211ff7c, 0x5d5d7878, 0xcdc33d74, 0x197fd299,
-	0x7fc9c30e, 0x3d62be41, 0xd5a0d661, 0x60ac7c8a, 0xf6224314, 0x0be04992,
-	0x67cb2bf5, 0x8a6f61be, 0xb9ea5e85, 0x94a75c04, 0x94743bbb, 0xd4a681ea,
-	0x8f687965, 0x9f189a29, 0xee2598d2, 0x4aa0b4a7, 0xbc930c75, 0x77ec59fe,
-	0xa967bc07, 0xd49564de, 0x5fc4e097, 0xd3c8fbca, 0xddfe92af, 0x9d6c60ea,
-	0x9553c0a8, 0x8219379c, 0xcaefb435, 0x69dea2dd, 0xf9e8eeed, 0xeb4f1255,
-	0x8c7d3a9e, 0xa11585d2, 0xa7897198, 0x3a98c6aa, 0xdc38b116, 0xadef299f,
-	0xf5fb7d64, 0xd1fc5bd6, 0xb78dfc2c, 0xf8c63ae5, 0xef914ce6, 0x1063c4ad,
-	0xd505d77d, 0x2ad1f120, 0xfc2c9025, 0xc72c705e, 0xb067ddf3, 0xbdcfac81,
-	0x3ee9e25f, 0x7e7c3fc9, 0x19e2bf7c, 0xfdc57df1, 0x7f868b3f, 0x832cf80d,
-	0x0d83f9f1, 0xde50b03f, 0x56df9631, 0xffd999d5, 0x13f1235d, 0x7a6b5fcb,
-	0x858767f9, 0x7f2c5bec, 0x6b95fa55, 0xf6fc2fc0, 0x0df85bff, 0xcb91af3a,
-	0x398735ac, 0x09f6b53f, 0xabf943c5, 0xf7ab9d6b, 0x7f7cf23c, 0x359eb9ef,
-	0xc6063de8, 0xa4e7bd30, 0x63bd175d, 0x96bdedfd, 0xe726bcde, 0x66b72f05,
-	0xe0dd3e73, 0x6675d8ab, 0xf67dbf49, 0xbd7fc253, 0x276258d4, 0xa4fba3ff,
-	0x9ce8a3c9, 0xc02e4caf, 0x566f8ff3, 0xee91fc81, 0x033be1a6, 0xa9e17f08,
-	0x5f94c5a2, 0xed0a7f1f, 0xb707dd13, 0x0257fd16, 0xd27b07df, 0xb667ee48,
-	0xbdfb488d, 0xfb61d783, 0x70b27dde, 0xe9e93967, 0xb445a593, 0x54e382ae,
-	0xed285e9f, 0x42c9f554, 0xbd84477b, 0xc8a64dfa, 0xff716fcf, 0x1b8a51fe,
-	0x7b35ef66, 0xdb323f28, 0x8094dfec, 0xa0be15f0, 0xb771aa78, 0x9e47ed63,
-	0xbe5175a4, 0xf38acd28, 0x8d08e9fe, 0x1851ed57, 0xb2a6eefe, 0x3f643dbc,
-	0xec87aa83, 0x7dd37762, 0x1f920ff9, 0xfe40fcd4, 0x1dfb117d, 0x66fa154b,
-	0xb6660df6, 0xec839dd7, 0xbca72ebf, 0xeb1777a8, 0xfb43ce8d, 0xc37dfc2c,
-	0x78dc051e, 0xa3ee63ce, 0x3a1e132f, 0x50b69c0f, 0x70d25010, 0x4711d2da,
-	0x25ed1b7f, 0x9cc2f30c, 0xe161ddaf, 0x7ffdcdfa, 0x2b79d0b0, 0xf384fb9f,
-	0x7e286b6f, 0x19ef3f20, 0x3a77bf95, 0x85aafcda, 0x4eb2b4f8, 0x91590181,
-	0x271e66e3, 0xcffd4afd, 0x369e84ea, 0xe4857ff8, 0x0dff8377, 0xf5215879,
-	0xe35b7dda, 0xffa1bbf3, 0x96ef041e, 0x03deb841, 0x0eb9cb75, 0xd11d81e9,
-	0xfc5257f3, 0x17cd237a, 0xa9f2befc, 0xbdd5f1e8, 0xfd601e7c, 0xbf47ab1f,
-	0x2e7ff433, 0x5f9f12e4, 0xa618af0e, 0x7d7d3ca1, 0x8830cd7a, 0x293caf93,
-	0x6ec306fd, 0xd89b0e5f, 0xebcec5ee, 0x2162bc6a, 0xfad55b7b, 0x6773f627,
-	0xf4c97d35, 0xe16a6f28, 0xc05bd97a, 0x79f08ebf, 0x49dd934b, 0x877976fe,
-	0x9af303d0, 0x42a0c1ac, 0xa25aa1e3, 0xf161f773, 0x90e049bd, 0x4816fec2,
-	0xe252b8bd, 0xe3c4a575, 0x06e38c4a, 0x8c8c7d53, 0xbc652be3, 0xd7673abe,
-	0xa9292a31, 0xdaebe394, 0x1e13268e, 0x5bd081e7, 0x6f4242f3, 0xec31f419,
-	0x40beac50, 0xd10f770b, 0x95936d77, 0x4be7d6eb, 0x0ebf35bd, 0x5fd296f5,
-	0xb40f747f, 0x7ef1fc8b, 0xddac7701, 0x9e886cad, 0xfc201aef, 0x7fd2cbd8,
-	0x4d101c2e, 0xb01ef297, 0x9e7f7e53, 0xfc827aae, 0xfb46bb56, 0x7e458eb7,
-	0xf55bf5c3, 0xeaf129e1, 0x4df68cb5, 0xfd181719, 0xc3679405, 0x0ee721f9,
-	0xffdc6447, 0x7f84039f, 0x1ab266b3, 0xc446ba20, 0xb30a0b49, 0x7349c6e2,
-	0x8637f409, 0x71b3f7dc, 0x77927191, 0xb7e228d7, 0x2cef757f, 0xaaa6baa7,
-	0xba2fa13a, 0x29bae126, 0xfb03f7e4, 0xd67555d1, 0x5533c520, 0x7dfc2fc8,
-	0xc909f11a, 0x46529363, 0xc671827c, 0x42feb4ed, 0xf3c4eaba, 0xfb446c2f,
-	0x2c2fcb8e, 0xabf992fd, 0x3738846d, 0xbc406de2, 0x3788c3b8, 0xbf0aaf2a,
-	0xa95e78d6, 0x51dc7075, 0xb5ea24d9, 0x337c8e1b, 0xede10b34, 0xd0f3fe6e,
-	0x3e4f54e5, 0x86e7d840, 0x54a7d0e2, 0x1ef5f457, 0xb5ff5c5b, 0xb52bff57,
-	0xe6950f2c, 0x6bf64c8e, 0x791fa20e, 0xb7d1ea13, 0xa538e0bf, 0xbdc248e1,
-	0x5aebcf94, 0xfce61fe1, 0xc3553a1e, 0x3783f626, 0xe4b72d41, 0x8dfa451f,
-	0x4ea29d2b, 0x3f6941e9, 0xf208ffa9, 0x773883f5, 0xf97f6146, 0x8549f437,
-	0x10d5ebe4, 0xe95532d8, 0xa42a07af, 0xdfcdacdc, 0xf6ae85b5, 0x0aa7fd63,
-	0x31184f29, 0xf58cbdb0, 0x8633fe9f, 0x4edfab5f, 0xbbb8ff64, 0xae52754d,
-	0xabfbf119, 0x6227e441, 0x271d905c, 0xe485fb5f, 0x7f794ecf, 0x65493d5c,
-	0x8b2699fc, 0x10b7f0d6, 0xdd37cc8f, 0xb2411da7, 0x5f87796f, 0x583e26cd,
-	0xdefa3bbb, 0xe7e8e889, 0xc8a0b1ba, 0x7cec8547, 0xbf8c6517, 0x31d5f874,
-	0x6fd56fc4, 0xd04a3b7f, 0x96519be7, 0x67c36bf4, 0xe2228ab4, 0xe2229366,
-	0x475afde6, 0x556bc532, 0x645f5507, 0xef41bf3d, 0x813ca597, 0xf503f226,
-	0xabe67403, 0x1fc126ea, 0xe2d166a6, 0x7e444bfe, 0xf7fbccc8, 0xbe462f1b,
-	0x067b1ef9, 0x40f21704, 0xf987b995, 0x89b4eaaf, 0x7d3aa9e1, 0xc4447339,
-	0x775a017b, 0xeabfe900, 0xc4fac075, 0xe76fa40e, 0xd891f7d3, 0x027eff9f,
-	0xb2c761fb, 0xfb8b97b7, 0x7f48152f, 0x9af6fc3d, 0x60f691d1, 0x2f7100e2,
-	0x3707840e, 0x10bf3f79, 0x6c3c4bfb, 0xbf324582, 0xaf79f820, 0x2e309b8c,
-	0x9c40737b, 0xfd7aecb8, 0x2b66eae9, 0xeab9fe50, 0x19d72b03, 0x92bcdd7d,
-	0xeab87ee3, 0x06fa4d1f, 0xa91bfefc, 0xcaf0f87d, 0xebfcf4d1, 0xe46fabc3,
-	0x29b2a97c, 0x2011cf2a, 0x5fe4dcf8, 0x5deef57d, 0x69b67fe4, 0xb6149fec,
-	0xee977d9d, 0x9835f769, 0x8ad1dbf9, 0x067613fd, 0x2aafc892, 0x11df4f9c,
-	0x98d56bed, 0x32dfd0ff, 0xfb3b2bfc, 0xd88aa757, 0x7c75c2bf, 0x4e8b6e41,
-	0xa7bad394, 0x9a688b8a, 0xd7a4e382, 0xe57f93c6, 0x0cb7f3e8, 0xf8933e78,
-	0xe0496eec, 0xd9028bbc, 0x4460cf82, 0x1aebdc14, 0x64ff675e, 0xf51aa35d,
-	0xdef188fd, 0x7b88065f, 0x3e0cef87, 0xe65e290b, 0x5da2bda3, 0x932fb8d7,
-	0x1cd6b1ce, 0xaea93e62, 0x3df18b33, 0x07ba05a2, 0x411fc09a, 0x273f0807,
-	0x65d211e8, 0x8438259e, 0xbdbdfafc, 0x2eb28af7, 0xf5ea2824, 0xf3875a6a,
-	0x5b974c77, 0xb3c7a5f7, 0x9ee92743, 0xe3be1d07, 0x8a1e2259, 0x5badff1d,
-	0x9f8e41e4, 0xf8f1fa13, 0x78e8ff4c, 0xc500327a, 0x48a05f22, 0xef8835fa,
-	0x35e763ed, 0xfe787ad3, 0xc70243dd, 0xf73b8f89, 0x63fdf026, 0x75e44ba7,
-	0x34dbea4b, 0x6d661efa, 0xec813283, 0xf79cdad2, 0xec197bf8, 0x5c9e9117,
-	0xf7c83e1b, 0x7b7515af, 0xc0e37967, 0xec2dddb1, 0x9df93cc3, 0x7cf8ec72,
-	0x3c067e39, 0xdb9e3219, 0x673ef74e, 0xf14ecdca, 0xeef89bdd, 0xd7a956f5,
-	0x6662df17, 0xe80cea3f, 0x227f7166, 0x481639ee, 0xd4ab7dbd, 0x63dfb1f7,
-	0x76fdfa1b, 0x67c2ceb9, 0x73dd3360, 0x7d9f7ec4, 0x170ff4bb, 0xefd79781,
-	0xf4bd5df7, 0xfeff6313, 0xea5b8942, 0x8a3051f5, 0xed087af4, 0xe45bd70d,
-	0x9eddb026, 0xae32305f, 0xa9df41df, 0x753bf2eb, 0x57fa0d6a, 0xf6c7bee7,
-	0xb9cb78f0, 0x86fbf997, 0x1d900973, 0xcfad9ee7, 0xe47a1a1e, 0x79774136,
-	0x14e151ef, 0xbff41a30, 0x645a1184, 0xffa0cd7e, 0xff0e9283, 0x394575c7,
-	0x63e645a0, 0x07fea90e, 0x475419dd, 0x38fec9dd, 0x21ed809e, 0x3ca86b9e,
-	0x846b50d7, 0x7034bb9d, 0xee3e5c79, 0x406a5f3b, 0x6e7493d8, 0xecad725b,
-	0x14845637, 0x22b0eefe, 0x9b7fa20c, 0x51caf9c2, 0xbf5c2d0d, 0xf154a4b1,
-	0x3c5a8578, 0x7c19f04b, 0xfc26c0b4, 0x7a5f8303, 0x88f925f1, 0xb85fc9c6,
-	0xb10bfa55, 0xda1a34fc, 0x4bfad167, 0xea878abd, 0x47c9af36, 0x4ebdc6cb,
-	0xf8b5eee1, 0x4cd2f908, 0x9f96317a, 0x1ffb735e, 0xb775fc25, 0x80525e5f,
-	0xfdcf1feb, 0x4ff1286c, 0xe8e435e5, 0xddbf4945, 0xae71c08e, 0x7597a963,
-	0x8db9f504, 0x5697841d, 0xd3b2bf60, 0x8365bed5, 0x8eb9b7f0, 0xc09c22a0,
-	0x4d15a5f5, 0xad6efe76, 0x713aa1a2, 0x26e3e90c, 0x7ec763d5, 0x52e9c379,
-	0x179423ca, 0x2a973a89, 0xabbba8bb, 0xbbba8bb2, 0xe7fee9b9, 0xeff813dc,
-	0x11d74403, 0xb57e3a58, 0x3ef87be1, 0x9335df56, 0x7fe1370f, 0x4b350f4e,
-	0xbb686cfc, 0xc4863992, 0x887fdd34, 0xfd7eeee0, 0x8a7d0b45, 0xd5e63551,
-	0xd6825459, 0xde79d6ec, 0xb52d752d, 0xe0365694, 0x429dbbb7, 0x43839aef,
-	0xbfcd6fd8, 0xea9b7abe, 0x258c6f83, 0xd2d5d5fb, 0xc112d636, 0x501b9def,
-	0x63a1c76f, 0x1ca49835, 0xca2adc6b, 0x0947e922, 0x3e6aaeb9, 0x8bf9499a,
-	0x7ce7924e, 0x1e49df6a, 0xdec56d81, 0xc923c933, 0x5a2fd99f, 0x4d4bbd63,
-	0xad03cf2a, 0x49edd463, 0x666df091, 0xc4852ef8, 0xa31d003a, 0x8e441716,
-	0xd6bffcd7, 0x3e851707, 0x07d288e8, 0x16429e06, 0x0388efe0, 0xa75cad87,
-	0xae3ff740, 0x036a3a08, 0xc26efd05, 0x76e48a60, 0x0f7bdd32, 0x834f9727,
-	0x41afa9bb, 0xfba54b58, 0xea2ab0e9, 0xbeb086fb, 0xbff7289f, 0x50b70b49,
-	0x7964f03d, 0xda053a5f, 0xe80cde79, 0x4e0bd6e1, 0x18ba0efe, 0xb24edc3c,
-	0x5a53e785, 0xe2143f2b, 0x99c27bef, 0x4d82eb9a, 0x871d6f7e, 0xd3787dde,
-	0x0f8182e0, 0x44d5ee95, 0x79ec533d, 0xfc28186e, 0x42bc9bbc, 0x414b910f,
-	0x2093c0f5, 0xd3f9f7c4, 0xebde43a1, 0x54c73fc7, 0x1ee90b8c, 0x31ba3a6f,
-	0x208f8c89, 0xe7469fcf, 0xa79de351, 0x19933e63, 0x9f049d4a, 0x7d34ce12,
-	0x73febf67, 0x28355374, 0xebefbde5, 0x5171fae9, 0xa7a83ddf, 0xa9f78de9,
-	0x7af1597e, 0x43d9beb9, 0xfc538ddf, 0x7b3ad613, 0xc03659f5, 0x722b8198,
-	0xfbe84e06, 0xc0fc046e, 0xdfb12475, 0x277c448d, 0xfe231702, 0xe751922e,
-	0x48b83bbb, 0x65913aa7, 0x7bfe36e9, 0xa1b6853b, 0x79af29e3, 0x339fcd28,
-	0x7dea8330, 0x62f246eb, 0xfb02705a, 0xecbf92b9, 0x78449de0, 0xf7c6bc50,
-	0xd37cc02b, 0x320bf7fb, 0xb227bf81, 0x3e77c55b, 0x6d1f91db, 0x3a052ca9,
-	0x23c35fd5, 0xd3f93a25, 0x0f365c5b, 0x256c477d, 0x707dedb8, 0x1d44d8d7,
-	0xd44d8d48, 0x72f51879, 0xb1ad78b1, 0x8f4e7919, 0x98f1fd8d, 0x627e90ef,
-	0x7842dff3, 0x98a9287a, 0xde530eff, 0x5cdcd32b, 0x7fbf250f, 0xf03049aa,
-	0xe7e36c50, 0xec94f57d, 0x3d52d667, 0x9359c237, 0x78ff5c01, 0x0a546934,
-	0xb4d565d5, 0x9aee7a89, 0x77eb008c, 0x7d615fb3, 0xd25ad35f, 0xb2e2f64a,
-	0xdd75c2c3, 0x07512e35, 0xd080c81f, 0x3d347af3, 0xa0f419a6, 0x8f594bfb,
-	0x5c65d064, 0x7bd0943a, 0x91dec2e3, 0xdb429384, 0xfdd037cb, 0x7470b8c2,
-	0x69d2197d, 0xf7a9d135, 0xc9cd1e3b, 0x7d061ef5, 0xd9987190, 0x06ee929d,
-	0xdfc69cbd, 0x516af023, 0xa0c08f7f, 0x4144f6e3, 0xe055332f, 0x7577e70c,
-	0x4e96375a, 0x14e11bff, 0x4bb0bac1, 0x00004bb0
-};
-
-static const u32 xsem_int_table_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x93cbff00, 0x51f86065, 0xd2f9c08f, 0xbcde0c0c,
-	0xc4b462a8, 0x0c0c5c0c, 0x0e5c4041, 0x7b401ac4, 0xdbe9016f, 0xcdce1c40,
-	0xc40110c0, 0x1ff881fb, 0x6207ff10, 0x04d6200d, 0x79405fe2, 0x5b1ba845,
-	0xda181898, 0x8803b880, 0x875880bb, 0x97418191, 0x93fb7891, 0xde181984,
-	0x7af82389, 0xcd0c0c12, 0xfff3f452, 0x5631c360, 0x29efb5f4, 0x174e3ed0,
-	0x19c73f04, 0x505c2498, 0xe0bb70d5, 0x4d078337, 0xcf8d179e, 0x9e7f4787,
-	0x5cbf2a21, 0x4d3f950b, 0x23e18187, 0x2d0a9a92, 0xc7416efc, 0x0c0c468a,
-	0xabc4464a, 0xca8c60df, 0xd081300f, 0xb1adf900, 0x0003a809, 0x00000000
-};
-
-static const u32 xsem_pram_data_e1h[] = {
-	0x00088b1f, 0x00000000, 0x7de5ff00, 0xd5547c09, 0xf37df0f5, 0x66499996,
-	0x0d909326, 0x8a027108, 0x081380a8, 0xc3b44069, 0x8e22a222, 0x260dc55b,
-	0x1037d902, 0xfdaff0fd, 0x2d361032, 0x4682d0d6, 0xa0c0748b, 0x0d0482c1,
-	0x00e02418, 0xd52ff82e, 0x5b7bbfd8, 0x16c34a0c, 0x7e1b8092, 0xce7fe5b5,
-	0xef25f7b9, 0x6d80264d, 0xfdfb5fbf, 0xe6f169bf, 0x5ddf7bbc, 0x3dcf76ce,
-	0x14fbdcf7, 0xf89628db, 0xe0cec663, 0x2cabd20f, 0xdd51b18c, 0xa0db6ce9,
-	0x74fa87a1, 0x6559ffe7, 0x4287ead3, 0x6ed0ab1e, 0x9cfdd61e, 0x7e5485b1,
-	0x386b8c40, 0xf4d31cbb, 0x8f0e1b10, 0x9616c96d, 0x6e7dd8cc, 0x0901bf46,
-	0x912974be, 0x5615ceb1, 0x780cbaf7, 0x085c7aae, 0x20c8f7df, 0xf7c25077,
-	0x1652c93c, 0xbaa23fe4, 0xbecc01d7, 0x6cb3233f, 0xe0da66c6, 0xc3fc0f6f,
-	0x7cbea07a, 0x63106cac, 0x059969ea, 0x77ea7fa0, 0x3403a512, 0x00efc336,
-	0x6c2df978, 0xfeeed0dc, 0xecfd13b9, 0xe8b78073, 0x5b7e89f9, 0x097f90c0,
-	0xecffa893, 0x5faa4afb, 0xf2f16f6f, 0x073e6c5b, 0x8d941636, 0x7f963bcf,
-	0x8be7c2e9, 0x7aa16e9b, 0xd82c5318, 0xc8b772cf, 0x635cfc4f, 0xbbfaee96,
-	0x76a214f1, 0x04d3d874, 0x3188feed, 0xb6bfb5e9, 0xd543c032, 0x0563d556,
-	0xaad84cbc, 0x700c7f86, 0x84295ae9, 0x9d9765b0, 0xfb4bc031, 0x9d870e6a,
-	0x9fcb0f9a, 0xaa1805a8, 0xff36b728, 0xdbc40afc, 0xa3ad9956, 0xf784fc66,
-	0x3bc71b56, 0x9e70e46b, 0x6ba5839d, 0xf7c74f77, 0xccad1a0b, 0x6e95f50e,
-	0x057a9fcf, 0x54fbf9c0, 0xd74a4586, 0x01fad02f, 0xea92185c, 0xcf18ee11,
-	0x36e0fda8, 0xca1eb439, 0x939ab877, 0x1ff1836f, 0xcf31b4ab, 0x676fd0c5,
-	0x80adf273, 0x96d0a287, 0xd15ef849, 0x2c8bc946, 0xfaeb6134, 0x7bc2fb37,
-	0xaf241ba5, 0x5c52f015, 0x433ccb17, 0xc0ce1f78, 0x3906d6bf, 0x9fc863fc,
-	0x1964e30b, 0x49ead748, 0x57f6c64c, 0x37671e68, 0x0e558e9e, 0x376b1e61,
-	0xda01ba5c, 0x5ecaf781, 0xc438bc94, 0x200b0b32, 0xb76fb65f, 0x81d67b4f,
-	0x0da05be3, 0x96b8e276, 0x3f2e586a, 0xeecdbb94, 0xd5adfec1, 0xd17e4126,
-	0x9e5ab5ea, 0x75c5fe81, 0xcd8f3197, 0x419aafd0, 0x88fe4629, 0x9b018f4c,
-	0xc453fb18, 0xf91eaf98, 0x37690944, 0x9fa2e419, 0x2ef44f14, 0xf54d93ae,
-	0x4b192603, 0x007eff82, 0x82be027f, 0x57849d3b, 0x05736e9d, 0x3b74e91f,
-	0x2987e425, 0xfac6d99d, 0x48e7f4f5, 0x754fe807, 0x5fd29ba5, 0xba52a654,
-	0xf443d2b2, 0x07f10279, 0x6fd172e9, 0x4e3658d7, 0x3e5d7681, 0x4b3146e6,
-	0xa71be298, 0xe7e09c02, 0x01ddf270, 0xf19673c9, 0x6a13e9eb, 0x72651720,
-	0x53e49b15, 0x05ac02fa, 0xb42f30e6, 0x9be8dcaf, 0xd7b19a38, 0x1c71e059,
-	0x502922ff, 0xac657480, 0x740fd53e, 0x1e812259, 0xc52d7c01, 0x961e0241,
-	0x067e05f4, 0x4f713d3a, 0x24b2b3f6, 0x70889ac6, 0x668f73de, 0x54353d50,
-	0x0cf50a8f, 0xc93d773a, 0xf54c73d3, 0xd02f4f24, 0xf54b59eb, 0x9eafcfd8,
-	0x318fa627, 0x917a67f7, 0x580bcf5e, 0xfcf3916e, 0x633c95c6, 0x333fb9ac,
-	0x949ea84a, 0x002cbdbb, 0x7f9d65e5, 0x864fb358, 0xf8c6c77c, 0x23328f11,
-	0x86df8d1f, 0xaa4139f5, 0x97147c8c, 0xa7926313, 0x09825f78, 0x9fb933ee,
-	0x7f927ca9, 0x653f29a0, 0x7c11a5da, 0x5eb770e9, 0x54e86026, 0xfea35e38,
-	0xd234fd6a, 0xd9fae33b, 0x9fa07e08, 0x03cef483, 0xbb170263, 0x57d8dfa1,
-	0x407ff406, 0x8eee5c0b, 0x2e3037c2, 0xea62a589, 0x991a60b1, 0x78e554bf,
-	0xfbffdf1b, 0xfde107c1, 0xe0e74b72, 0x4bff8078, 0x8e21f71a, 0x4ca88ffb,
-	0x32316e81, 0x3172c0ab, 0x6ffa4656, 0xb3f64669, 0x975e0341, 0x917e000d,
-	0xa65debba, 0x1f915206, 0x4115825b, 0x3025cfe4, 0x8c7eb041, 0xe115641d,
-	0xfef085e0, 0xc454bc80, 0xfd0355bf, 0x835f6c61, 0xfb5287f6, 0x5b7ed8ad,
-	0x075bed2f, 0xb7da98e6, 0xda9817a5, 0x3ed069b7, 0x706747c8, 0xf01f68be,
-	0x93b18637, 0x6fb53e6c, 0xf6a02f4d, 0xc0ac6a97, 0x574c7ed4, 0xbb60dffb,
-	0x49fb63df, 0x703fc651, 0xe9fc798c, 0x6bf1e645, 0x416cfc7c, 0x431fb450,
-	0x20a497e3, 0x117a7f1f, 0xd795bf1f, 0xabbed5db, 0x049aff0b, 0x5ea43aed,
-	0xac683fc6, 0x9417fc79, 0xe56fc798, 0x2c17bbed, 0xa83bed13, 0x196978fd,
-	0x2505ff1f, 0x0d66bed4, 0xb48f9178, 0x211531fe, 0x40d34f9c, 0x07485280,
-	0x921d28fa, 0x93e818c0, 0x8481b2df, 0x38620787, 0x03137ddf, 0xd6e8e6fc,
-	0x12042ca7, 0x9970f308, 0x8de2e9e0, 0x3f3e34e3, 0x9f5e6907, 0xab3aba2d,
-	0x8cf9a651, 0x2e86b4ad, 0x37b6fe82, 0x678441ca, 0x2432bcad, 0x760a7cd3,
-	0xb0a7be02, 0xf3ff3e30, 0x8ceb61aa, 0x674c8ae3, 0x2dadab57, 0xd2eab906,
-	0x90d9e3ef, 0x055fe80a, 0x6ea8c132, 0x34f415b8, 0x39fc3d03, 0x0f4c63e8,
-	0x392edcab, 0x5d9c7a04, 0x059b946c, 0xb2092edc, 0xff4087f7, 0xdffa227f,
-	0xb77c70aa, 0x884293ce, 0xcc566fff, 0xcd9f50d1, 0xa4058eae, 0x5ca3f777,
-	0xbb73a9d0, 0x14f64435, 0x9f88074c, 0x191449db, 0x1baed3fb, 0x305c94de,
-	0x31f4d63f, 0x0b3777bd, 0xf2854e2d, 0x0ee79733, 0xeff8c370, 0x211d669a,
-	0x7cc4fce3, 0xc7242dfd, 0x8725bfac, 0x2b0d69b1, 0xdc00fed4, 0xbcfd4d3e,
-	0x1dfef0c5, 0x577c3301, 0x576e1981, 0xed05aa43, 0xad894299, 0xa9ef7a85,
-	0xedebe730, 0x3812964c, 0x3f7b455d, 0x85f41c01, 0x3a60f747, 0x89bb1f02,
-	0xfcddd3ae, 0xe53fbd5d, 0x4c2ca90f, 0x124b71f3, 0x5127fa23, 0x8f9b80b9,
-	0xd3bfb23b, 0x0fcf9b55, 0xa0fe99fd, 0xec8cf84c, 0x58aecb7f, 0xd9ec059f,
-	0x552f9a96, 0xf1c8c164, 0xc67ff644, 0xb8f1c8fc, 0x721f9c35, 0x39cf9183,
-	0x53f2449f, 0x5fb8e379, 0x53f0321e, 0xbfb5fd69, 0xaf78643c, 0x1326eeb8,
-	0xc3ba185c, 0x26bf3e54, 0xbb3f94d7, 0x3f94d0ba, 0x131cd973, 0xd07c1b9c,
-	0xfcc67e54, 0x7bfca605, 0xe5311e2a, 0xc2b055df, 0x7811df04, 0xf6fe54ca,
-	0xf94d6b69, 0xdc975d96, 0xf5547288, 0xde70cc81, 0xfad1daf8, 0xbf37b473,
-	0xa45e2876, 0x57b011c7, 0x818e0e50, 0x7b6982bd, 0xabb248e3, 0x31e60f41,
-	0x4b56a130, 0xc6cb83fb, 0xa4665ea2, 0xefd2433f, 0xc634c183, 0x843c979e,
-	0x6346b93f, 0x89616061, 0x71f17425, 0x6fc86ca7, 0x0d7e4739, 0x9ec8fa08,
-	0xf44b72f9, 0x72ebe5e7, 0xd3bd402f, 0x5f803e9b, 0x3ae79c7f, 0x99103d84,
-	0xbf31225f, 0x7ebeb9f1, 0x7ae25cba, 0x53ac44be, 0x3bea5e4a, 0x0e10b99e,
-	0x5b38ae0f, 0x5480f57b, 0xfd6893d4, 0x803f2127, 0x51e81814, 0x24c8375c,
-	0x65bb6ddf, 0xea1957ea, 0x99abd004, 0x4257bfcc, 0x9bde133d, 0xec30cb7e,
-	0xd475ef87, 0x8931acfb, 0xcab6f5e6, 0xa43cbfc9, 0x94fc7d22, 0x469ca91e,
-	0x80656b69, 0x059543d2, 0x595e7e94, 0xe54b6941, 0x540f4a7c, 0x63fd2906,
-	0x3f4a32e5, 0xf4a6acad, 0x4a1acae3, 0x510cac3f, 0xa3e95eda, 0x2e879754,
-	0xf617ebfd, 0xc0b758b0, 0x8b0f6e03, 0xb2822cb1, 0xdee724cd, 0x53f39454,
-	0xa3066f8e, 0x63ea7fbd, 0xde8ca260, 0x6fc915f1, 0x47d1d3bd, 0x085e4af6,
-	0xcf4fa798, 0xa70c7b7c, 0x26c2dd93, 0x8f47d033, 0xf79cf45c, 0x2b04a1de,
-	0xa9c032c8, 0x519c9bde, 0x0fb985ea, 0x3a2e75e9, 0x70e75f31, 0x3eb7675c,
-	0xac6c97fd, 0x206972f7, 0xcaf7879f, 0xf0b30f34, 0xd7a45eb3, 0xf49bc50f,
-	0x5bd29fda, 0x2e89dca0, 0x33a735fc, 0x6e48e748, 0x8354ffaa, 0xc7882995,
-	0x2e10d8a6, 0x7bed4f8d, 0x38f285d6, 0x3eae5537, 0x7c77b234, 0x5467d695,
-	0x29e30c3b, 0xa7c3346f, 0xdcc9a5aa, 0xbb89e07f, 0x95f21875, 0x45d0fabb,
-	0x4a54ff48, 0xa6e67af5, 0xb1ced46a, 0x7c7141ba, 0x79f10efe, 0xf13c6370,
-	0xa93bac2b, 0x3fbb3ffc, 0xf7a3d5bd, 0xf606b187, 0x01f50d85, 0xf73a0de4,
-	0xdd07a8fa, 0x3f34af95, 0xfd49abd2, 0x1885ed06, 0x206677f8, 0xac10abd6,
-	0x2f5e5bd7, 0xe397ad07, 0xf6a68df3, 0xbe8f3de0, 0x7af7c7a6, 0xb5855be7,
-	0x7d04e3ea, 0xe7f0a575, 0xabd9d714, 0xbc4af3cd, 0xec6f2e09, 0x679a6d5b,
-	0x7f900ff0, 0xc8292156, 0x9b82253f, 0x32c7143a, 0x6a97fa09, 0xe5bd50f1,
-	0x6a572f12, 0x1e02d16b, 0xb466c762, 0xd1cdee33, 0xfb73cff9, 0x1fdf401f,
-	0x1ecaadfd, 0xd7e17cc5, 0xb06cf551, 0xe7e82d6f, 0x0dbdd011, 0xef5053c5,
-	0x3d76dd1d, 0x98b327d9, 0xa48b85df, 0x8d9d5602, 0x6609ce76, 0x7ffc8c99,
-	0x35defd82, 0xc8deb0d2, 0x9fd468b7, 0xf3cccb99, 0x2667d82c, 0x0cc6bf38,
-	0x939bb1e7, 0x56f3df91, 0xa0b730aa, 0x6ff39a5c, 0xbe49b8b7, 0x12c559f2,
-	0x3f08ef5a, 0xa66ebdd8, 0x2fb907f4, 0xec99e57d, 0x87e8a1dc, 0xf75bfae0,
-	0x7026140f, 0x3128a53b, 0xff20f9a4, 0x3f91868b, 0xfbe182b9, 0xa7a825a1,
-	0x5de64e82, 0xefd27acf, 0xb23ff687, 0xd27cfabf, 0xfa214fc3, 0xbe49d721,
-	0xda759450, 0xd84916c3, 0x974a415b, 0x76eb718b, 0x5c044d6b, 0x47d7011b,
-	0xbf377fc0, 0xbf133225, 0x35025aa5, 0x5fce2496, 0x4a482f68, 0x47f816a7,
-	0x51ed4fea, 0xb53fed7f, 0x3fa834fe, 0xfd7f54db, 0x0bfeb53f, 0x29bff47b,
-	0xafa5fd5a, 0x0416da6c, 0x79b4537d, 0x3cc18b95, 0x4ea95474, 0x4bdd02f6,
-	0x21762fd6, 0x82511c1f, 0xa3e7e42e, 0x34727921, 0x22d2f87e, 0xe7cca2fc,
-	0x855d7090, 0xc7fd427f, 0x54d9f85e, 0x59bee7b4, 0xbd69baaf, 0x5b0d6754,
-	0x1acb4e41, 0xdfa0a70a, 0x1c83e017, 0x46527a5e, 0x9fccd1b8, 0x4aafcf45,
-	0x701eff46, 0x844f588a, 0xab2a5ec9, 0x9c24f3fd, 0x2759ca87, 0x7be459c9,
-	0x04e9fed8, 0x5ab98fd2, 0xe87ccf5c, 0xe5f9d927, 0x0de52f02, 0xbb293b3f,
-	0x30f6bd30, 0x4cb013ea, 0x7c8f0ec8, 0x41d840af, 0xc4ce2c87, 0xb1425856,
-	0xa11fb11f, 0xc2f1d4de, 0xaa0edc42, 0xf0e4f0da, 0xb6afd083, 0x24badfda,
-	0x7974be03, 0xf33f553b, 0x7a7aafd7, 0x62edcbd7, 0x5efdd7bd, 0x34f3de88,
-	0x89adfb0a, 0xd86a25a7, 0xc971f685, 0x841bd55a, 0x9e9b25c7, 0x5c69ee7d,
-	0xf5627eaf, 0x17f5045e, 0xc3e37a6f, 0x6f170031, 0xf0a71351, 0xe4a43861,
-	0xc394fa6e, 0xba23f9bf, 0xf2f451e9, 0x18679a1b, 0x4270fe7f, 0xb78a5d37,
-	0xb0d8d6ec, 0x5098f89e, 0x716b5bbf, 0xfd4fa144, 0x676849c1, 0x56f86d55,
-	0xd1e575c3, 0xc94b125d, 0xb5cf8288, 0x80bd906f, 0x0a7a2278, 0x2fd1757a,
-	0xd0397ca2, 0x247af505, 0xbdcb22bd, 0x1465fa81, 0x93fd17af, 0xbe2fdfc0,
-	0x4fec7e8a, 0x43c45ead, 0xb9f78bc1, 0x95873c70, 0xcfe7ce0a, 0x3f464e2c,
-	0x4c1a817d, 0x9fca5376, 0x9fb9ac17, 0xbdff2ff8, 0xfaf993fb, 0x42d7d7d0,
-	0x2fb05573, 0xeaf6738e, 0x799c68db, 0x587c402c, 0x0fec8cf0, 0xc2b5fa41,
-	0x22896f26, 0x9732c527, 0x80ebc393, 0xc3ce30b8, 0xbf414eb8, 0xd0e5efee,
-	0xcc8ff27a, 0xee0fa861, 0x6cf1fdd7, 0x8b5fc12e, 0xb27184fd, 0xdae75f45,
-	0xbb5bfc4c, 0x74e919b4, 0x052f806c, 0x4ce56afd, 0x487c0a09, 0xf95ea067,
-	0x3853abbd, 0xc947989d, 0x5d81ef16, 0x639f0130, 0x67d566f9, 0x8f7a6e1f,
-	0x6ee8c99d, 0x1f689e7f, 0xf3831dfa, 0x5664e1f9, 0x7c651f50, 0x07aeb235,
-	0xf0375e60, 0xb9de4199, 0xc23ed7fc, 0xff975de5, 0x31934dd0, 0xb9f7abff,
-	0x387be11c, 0xc2bf425f, 0xfbbf9429, 0x83f48956, 0xc9a38595, 0xe42aad79,
-	0xc91f9cdc, 0x457fd02f, 0x0df0338a, 0x744093b6, 0xde5abf20, 0xa8df784a,
-	0x575db157, 0x39757acf, 0x20fa17ce, 0x707d064f, 0x603eb759, 0xe81eb9ab,
-	0xf20aeedd, 0x7a1a9bf5, 0x5f9469ee, 0x07a0d790, 0xe3f557e5, 0xdc6f8ff8,
-	0x209de1fb, 0x75ebc7b7, 0xd5eb35b9, 0x782db948, 0x7c84bd69, 0xc7b7291a,
-	0x894ac00b, 0x3cf0b726, 0xb416dcaa, 0xaaf44bfc, 0x65c7c78e, 0xf5d55eb3,
-	0x8cf86f64, 0xca9793d4, 0x127aa89e, 0xecb3ef7e, 0xf3a8fc9e, 0x457fcea1,
-	0x80bd29bf, 0x9f3a09fc, 0xc5d87cea, 0xf61f3aa7, 0xf098cff0, 0x3b7f9918,
-	0xc10c04f2, 0x7f255dbf, 0xdf134962, 0xdef7838f, 0xf8459fec, 0xc734d1f2,
-	0x9fecdfaa, 0x11438468, 0x79447d70, 0x8fec045f, 0x80881f28, 0x4be54c2b,
-	0x8c6af71a, 0x2a6c20f8, 0x2bff9d67, 0x759445f6, 0x950f3eac, 0x82d49c37,
-	0x9d691fc8, 0x753fea1a, 0xe8a89821, 0x9329dc3f, 0x7003b0ff, 0xe9da04bc,
-	0x0a1198d8, 0x6c591e82, 0x0ecdebe7, 0x012ba777, 0x1cf1c5d2, 0x96d24cee,
-	0x9fd41ea0, 0x1fb9da77, 0xe9dfc3a4, 0x31f8378a, 0xa4c9360e, 0x6c425bc7,
-	0x093f3472, 0xdf8434cc, 0x3e5bd616, 0xe0768ff7, 0x87b633be, 0xcf40cefb,
-	0xfa4765ab, 0x56bf5c7c, 0x23605ecb, 0xedc16b36, 0x77a1742e, 0x71ba0d34,
-	0xfd9f3c1a, 0x6db7ccb6, 0xafa53e82, 0x8471dd61, 0x2b189f05, 0x72de7ee1,
-	0x4d999fe2, 0x6b321d7c, 0x28797479, 0x39e5ef12, 0x77a869e6, 0xb9f0fd61,
-	0xd7ac0fd1, 0xe23ab053, 0x42f5d379, 0x3d69aa6e, 0xce6b5458, 0xd4f5880f,
-	0xc9feba37, 0x7fa49964, 0xeb84a170, 0xafb7a17a, 0x38de8796, 0xb1d3e80d,
-	0xbfb8664f, 0x2649aa7a, 0xc8da9cfa, 0x305953f7, 0x8cafe489, 0xd4be9275,
-	0xf286d6f1, 0x7aef7175, 0x9feb6dac, 0x3e421fb2, 0xe187f6da, 0x6db482bf,
-	0x778327db, 0x47cafc20, 0x3d607fe9, 0x65d84fcb, 0xc7733f27, 0x7ff1272e,
-	0xa5dfcec7, 0x76f0843f, 0x3af7f92b, 0x1c3b7d76, 0xa163b1f9, 0x60f500b5,
-	0x7ebe00c7, 0xedf9daaa, 0x7f9a16f0, 0x331d1117, 0x7de88d14, 0x072fe9aa,
-	0x54e02e30, 0xed0a8c13, 0x24b15d8b, 0xdaafe55f, 0xb1d11fc9, 0x80ecdbf3,
-	0x9e379fe3, 0xd3ffb132, 0x5ed364e1, 0x73c5fec2, 0x8ef979bf, 0xc02ecfd1,
-	0xdd86f1fd, 0x9fc84cda, 0x875fdaf0, 0x78ed7ea3, 0xed4ddb89, 0xdc1acb6a,
-	0x48ba18df, 0xbd02a85e, 0xfac851da, 0xd16fb631, 0x4728f1c4, 0x57f2f13d,
-	0x2f9cb3f2, 0x7c28263e, 0x8feffb3d, 0xf5c7c90f, 0x9364339f, 0x1ddfdc70,
-	0x89ea03f8, 0x4be2565d, 0xebc7bc7d, 0x733d9017, 0xfbdf71ae, 0x52dc6e3f,
-	0xbdc67cf8, 0xff9cdfe0, 0xfa878aad, 0x3d072917, 0x03e77cf9, 0x7a726f04,
-	0xc9e7bfa9, 0xa7ff6bef, 0xa025fdd1, 0xe3dcebbb, 0x4b3fff0e, 0x0ba7b7f7,
-	0x3e31bbba, 0xbfb5fca0, 0xa87eff52, 0x37f96b9e, 0xe36f7ba7, 0xb7fdedd7,
-	0x33f79e2c, 0x5664fca1, 0xe2c340ed, 0x6f3dd2da, 0x5bee4267, 0xb1e37b69,
-	0xf623e3bf, 0x5e34f47b, 0xf1b6fee5, 0xed03efb8, 0xac4978b2, 0xab3af917,
-	0xfa2fb0bf, 0x3b23cbcf, 0x63da7fa4, 0xc5304f64, 0x2bf712b3, 0xe99f4adf,
-	0x360bd8a5, 0xc200e3e2, 0x6c052bee, 0x4afe6f5e, 0x4adc3e62, 0xfd7e9fed,
-	0xd373b43e, 0x83b264d2, 0xf7fb2521, 0xfe64d775, 0xad3344bc, 0x98f5ae87,
-	0x129347d7, 0x89a8ebcd, 0x19abbea2, 0x0ed5ffef, 0x3c021429, 0xcbf01f8c,
-	0x8ea7f444, 0x126548bf, 0x605893c0, 0x263bae11, 0x9df5cc3a, 0x836c7dc0,
-	0xc5eff1bf, 0x3c2ec4e3, 0x47e95c0e, 0xc9900e3c, 0x3c4e7aaf, 0x6f09bf62,
-	0xc78c2199, 0xe3978a61, 0x4bd4a131, 0x1eb16a7e, 0x1da26ec7, 0x349638a3,
-	0xb82b3ca3, 0xa078e69e, 0x9ebeb875, 0x4cdf0dee, 0xd115cfac, 0x257f8ea4,
-	0xcdd9f64d, 0x5cfad1f5, 0xa50fcba7, 0x7fc74e87, 0xaac92e94, 0x8e692e99,
-	0xebca0a39, 0x8c3f5c64, 0x1c99f2c4, 0xb42a0b4e, 0x0fd624df, 0x28e678d7,
-	0xa4278041, 0xaf482a65, 0x22f6db7c, 0x79b51f8c, 0xc5c7ea25, 0x1f9a166d,
-	0xe112596c, 0x428d487d, 0xf7167bf0, 0xd4f7a428, 0xfe395e2b, 0xbb3f4320,
-	0xba06e34f, 0x7c97ef9f, 0xd8cce67f, 0xf0c7f46c, 0xde7fc61f, 0x59b7eb00,
-	0x063859ab, 0x615b34f0, 0xf404b8c1, 0x73ec4b93, 0x0cdc9f93, 0xe4aaefe3,
-	0x55ce7aee, 0xf2bd37be, 0x015f4ecf, 0x45f9f63d, 0x94c76d8c, 0xc6288a6f,
-	0x9a8ff6f5, 0xf7cabe38, 0x1e40d0b3, 0x0dfb2187, 0xab2f8afb, 0xcaf33fdc,
-	0x891a5f1f, 0x1d71dceb, 0x7eb8e343, 0xa971e2cd, 0x8a70bd62, 0x0ebce279,
-	0xe283afd4, 0x9f74bf68, 0xe7168cec, 0xbfac41b8, 0x28f1837f, 0xb2d47690,
-	0x57d7196a, 0xbefc93ac, 0x5b1b5ac1, 0x661e251f, 0x7e116a8d, 0xf8374122,
-	0x7fb8d9c9, 0x0d9fdbc3, 0xe919c6af, 0xa8e536d6, 0x1d27bc32, 0x61b9f7f0,
-	0xc51feaff, 0x11f7ae2f, 0x2dec1bbf, 0xf451fc93, 0xdfc0bd47, 0x91df3dd4,
-	0xa6d2f49f, 0xdfe416b5, 0xa62d6b4b, 0x553ad8fd, 0xb04631f8, 0xa9afd811,
-	0x2cceec7b, 0xd93ecba4, 0xe5a5f18b, 0x40b5274d, 0x48c47d94, 0xe8fd627c,
-	0xdd556f7f, 0xb50eeed4, 0x75e2267e, 0xc31b09c7, 0xad76f575, 0x3f5a38ba,
-	0x7ef2b4ef, 0xf7f566ce, 0xf7f8cf0d, 0x0eb8efc3, 0xae3c7847, 0xf0996b3f,
-	0x1ff24483, 0x553e3e23, 0xbf3842c7, 0xf5157ae2, 0x8c8da9c2, 0xc94077e6,
-	0x06feb863, 0xd1b1ff79, 0xe37173af, 0x5da0df96, 0xb924d650, 0x4ca24b71,
-	0x8fd0d169, 0x2f18de5b, 0xe99c3ce3, 0xdd6fe3d1, 0xc8356ec3, 0x10aaab45,
-	0xd98ef6be, 0xfbb61771, 0xd0c69b65, 0xdebdf14e, 0xfc79c2e9, 0x2491a6cb,
-	0xeb8dbd07, 0x34564ae5, 0x841ce311, 0x87e48c3e, 0x4c631ba1, 0xa07215f0,
-	0x54d7ca1f, 0x6f3ccb6b, 0xd32dfa14, 0x788fb124, 0xf42dfa9e, 0x7b7e99ff,
-	0x016fd75f, 0x23906fd9, 0x419bc0bf, 0xd344a5bf, 0x4f25736f, 0xee7de20a,
-	0x482941ce, 0xab6fb9d7, 0xdbf4d149, 0x2fbe4aa6, 0x4dc459ba, 0x7e803477,
-	0xdfa0dcbb, 0x45bf401a, 0xa3191f89, 0x73fa7ee9, 0xbfd0b7e8, 0xa136fe46,
-	0xde328b7e, 0x74fe041b, 0xe9bc36fd, 0xe1b7e920, 0x3c53160d, 0xf84d44f0,
-	0x6fd57a9b, 0x68add252, 0xbd53ef1f, 0x67f851b1, 0x37c7b093, 0x6c46388b,
-	0x955cf507, 0x5cf4c3f6, 0xb9eaf9de, 0x759e117f, 0x2b77373d, 0x9ee8b8a3,
-	0xdcf5c87c, 0xe7a0eddc, 0xae47e424, 0x64eee6e7, 0xa1172fdc, 0xd0f486df,
-	0x97ca8c6f, 0xe5fbf985, 0xde4f198d, 0xf08df50d, 0x941b5ea9, 0xefadd11f,
-	0x5df51946, 0xbe8bd695, 0xfa7e77db, 0x77d0ab6e, 0xa206c7a0, 0x0fe48d7e,
-	0xde39936f, 0xc3e8c77c, 0x79465f1b, 0xfb4c9df9, 0xf859ef92, 0xa33bd1fe,
-	0x7f21670f, 0xf3fa2a7d, 0xd9e9c6a2, 0xfaa4195e, 0xc7cebc27, 0xfb91ba57,
-	0xb81acbcb, 0x2b56587d, 0xe7f03c87, 0x69df31a4, 0x9dc2ffd8, 0xf8014b12,
-	0x13f56b26, 0x9febb40e, 0x1f589957, 0xf034c94d, 0x629cacc3, 0xd957fbf2,
-	0xfcf0eb5d, 0xd9852cd1, 0xec5fbfd0, 0xed147498, 0xbe1ce2e0, 0x9e2c501f,
-	0xb3b071eb, 0x4464f4bb, 0x9ce3483c, 0x9eb3fb37, 0xad531671, 0x9f53ae9c,
-	0xb7184295, 0x22ee33da, 0xb8a17a44, 0x5dfcfcce, 0xc9377f21, 0xf62f842d,
-	0xee351cae, 0x85d72f43, 0x4f027da7, 0x9e131780, 0x3c545242, 0x64a7a501,
-	0xa5e37726, 0x4b2d77f0, 0xf0a05f70, 0x91f68929, 0xe3adc723, 0x3afc722d,
-	0x773f751e, 0xbf2fa8b1, 0x6b9d2d69, 0x8e8bc48a, 0x747c48e7, 0x1f023de1,
-	0x7e5d69ef, 0xd71891ed, 0x7a437c04, 0x809ff826, 0x3fc76817, 0xf9d322ee,
-	0x5e048f9b, 0x9b8f5646, 0x370fe180, 0xe43a1c61, 0x79ccd5e7, 0x63e02fb3,
-	0x119ec7d4, 0x315e9d38, 0x7dc01ac6, 0x4ef60dda, 0x1f3a83d2, 0x3e72b30e,
-	0xd95e84d4, 0x3c62afd1, 0x251bf3ad, 0xe521da37, 0xb5e13b61, 0x0ed1f81c,
-	0xf53ef645, 0x578124cd, 0x6aaf9d37, 0xd013f314, 0x26eb82c1, 0xf10abe7d,
-	0x9b2358f3, 0xebca5d38, 0x58b25d38, 0x94c7ed27, 0x30de48d5, 0x71aca78c,
-	0xeba1c50e, 0x0e7e19fa, 0xf0a29d23, 0x7f8d12af, 0xb39b3a19, 0x62cde7bb,
-	0xb5aa6e51, 0xe7dc43fa, 0xb1f20a99, 0xfe10d896, 0x3efe1677, 0x2450fc57,
-	0x78132ebd, 0x757884db, 0xb93afe20, 0x8efe15fd, 0xf9e969ce, 0x84d04ae5,
-	0x9f4f09d7, 0x53b7fce6, 0xac5fa0f2, 0xcfc86f0b, 0xc74a3f90, 0xd233f21b,
-	0x465729a1, 0xddf00f38, 0x78e7a327, 0x28d4bf71, 0x0f3b85f7, 0x919ffaf2,
-	0xb8ca2cbc, 0xff7f307f, 0x4deebe40, 0xc55987de, 0xf7f0413a, 0xfdcef63b,
-	0x77bf9123, 0xd12fdc4a, 0xf7da6f14, 0xd7cac1bc, 0x20ec1b4d, 0xf6dfb807,
-	0xe75deab6, 0xae1fa9e9, 0xc03972b2, 0xe0c784f5, 0x0704baf7, 0x75a6f182,
-	0xa4178a36, 0xf6e40c7e, 0x6f5f51aa, 0x5ba4b3b2, 0x7faf7ab3, 0x37bfa88a,
-	0x8787497b, 0x47a87b61, 0x21bda11b, 0xce45eddd, 0xe0ffba17, 0x43bae35c,
-	0x3bdfcff0, 0x1f9dbd2e, 0xce554f1a, 0x4c5f699a, 0xb54aab8f, 0xd1515e04,
-	0x992c9bbe, 0xe7a0b7e2, 0x70ffce82, 0xa36ab7fd, 0xa59faf7a, 0xd08ec8da,
-	0x2d5ecbcf, 0xf010583b, 0x254fa5f6, 0xe32b0179, 0x7f38b183, 0x1079878c,
-	0x8ff72f92, 0xca6ee8fa, 0xed9f6997, 0x29f5dfc6, 0x1bc87dc5, 0xbb1d0c79,
-	0xfb225331, 0x6cac3de1, 0x36e1da34, 0x268ab3e6, 0x47e73f21, 0xd73c21f1,
-	0x3d5b5992, 0x3d7203c1, 0x85542ea2, 0x674277a9, 0xaf483be2, 0x7a433271,
-	0x4cfafb35, 0xbef7f9c0, 0xdc4cb33f, 0x813b078a, 0x8fb119ea, 0x31b96125,
-	0xce5a24be, 0xeaf86e8c, 0x7fa05bfd, 0x5ecbf7a3, 0x69bb940f, 0x7281c3af,
-	0x85b56436, 0x19780c05, 0xe85542c3, 0xc87d1a77, 0x83ea0b77, 0xf07bb002,
-	0xd341497c, 0xc2172ada, 0xbf7a25ab, 0xe498183c, 0xaa6dfe82, 0x32e93939,
-	0x0e500bd4, 0xcd5f29ab, 0x4ad795cb, 0xce710c5e, 0xf1415a6b, 0x12b57948,
-	0x14dc601d, 0xd78d9892, 0xbd41b21b, 0xfbc3569b, 0xc17f3859, 0xed6f58fb,
-	0x416ff7c9, 0xa4fd03bd, 0xfdf237f7, 0xcf783cfa, 0x3b527283, 0x5c2bea87,
-	0x073c312d, 0xcf91b053, 0x55fb054f, 0xec37e62f, 0xdde68a7e, 0xdf5ed029,
-	0xc28f9c0c, 0xd13ce913, 0xe74dc948, 0x80be1f38, 0x0e0756f4, 0xa5f05f18,
-	0x4909f8f3, 0xa3fd62c0, 0x6dfd7fdb, 0x9e535cfc, 0x07d68177, 0x272779ea,
-	0xfc42c329, 0xe1f69274, 0x03be010f, 0x79379c56, 0x9cdecb3c, 0xc316b42f,
-	0x1b6398fc, 0x6acfef44, 0x1e71471c, 0xe29f99b3, 0xe68ea63c, 0x57bbe776,
-	0xefe843da, 0x4ced577b, 0xaf7be7c3, 0xf6f3d2b4, 0xb70f5c4d, 0xbf21680f,
-	0x2ad5e1fb, 0x552ff3c3, 0x13d265ab, 0x74aa3787, 0x867e576e, 0x6fe437c7,
-	0xdec876e2, 0xc3debcd5, 0x9b7edc75, 0x936dccf0, 0x5fce1e70, 0xeaf9cfcf,
-	0x875f5a7a, 0x4d0bb9e6, 0x9ea45bf3, 0xa970f5d5, 0xf54147c0, 0x8f4fda5a,
-	0xfaa5bbd4, 0x6fa1187c, 0x9d9f714b, 0x24c3d3f6, 0x91f5a547, 0x6e8e65f1,
-	0x43f20dbf, 0xefe23bf8, 0xc32afdb2, 0x45f48d75, 0x678a24db, 0xf21ef9c3,
-	0x3e493747, 0xf8287b8c, 0x7b221ad8, 0xe33b943c, 0xf99e703f, 0xc8f0cac4,
-	0x03d22b48, 0xb58e54f4, 0x84bf8ff3, 0xb3df47e7, 0xf010e461, 0x5fe12e4f,
-	0x5ace138f, 0xb27ee3cf, 0x8c995bde, 0xc4d98de7, 0xf207a43e, 0x3016646b,
-	0x92a38de8, 0xf93b96ef, 0xfb46e0fc, 0x966ba747, 0xf3879d56, 0xeb8d916c,
-	0x957acf47, 0x0bc78bce, 0x3e0bd618, 0xb70a77b4, 0x0cd648af, 0x73b850fc,
-	0x0ea83245, 0xcbc444b6, 0xe6738954, 0xa76f1a85, 0x5ee49770, 0xaf47686b,
-	0xdb57af47, 0xb41bdfce, 0xd5bda793, 0xa3fd885f, 0xa1ad7e71, 0xa7ac88de,
-	0xd4bdfb47, 0xa75ff393, 0xffb9e257, 0x0a65779c, 0x62f9cf76, 0x3ee320ca,
-	0x7eea9e8f, 0x2df7ece6, 0x5fc067cc, 0x98631fce, 0x86ef40cf, 0x40ff2051,
-	0xb91a1bbf, 0xea30d73d, 0x459a56a0, 0xbde51bb0, 0xcba3f84c, 0xbbfdf226,
-	0x16f7cc86, 0xc94ffca1, 0x581f8892, 0x49f5a030, 0x83cdfb24, 0x59f900fb,
-	0x787cfdfc, 0xe1b2e51f, 0xa0a72e29, 0x4fa83c2f, 0x98af56ca, 0x256be544,
-	0xb0dfd60f, 0x92ec9736, 0x51991c82, 0xb241ed7e, 0x0f1a0a93, 0x833ca226,
-	0x7b44aefc, 0xd5ac6ca0, 0x9758ea8d, 0xdfce5d4b, 0x9961e715, 0xcf0c3dcd,
-	0x5876e077, 0xf796f934, 0x72b76133, 0xe1cf2cb9, 0x26eefb72, 0x3e784715,
-	0xad724e72, 0x728cb1cb, 0xc72dd59c, 0xd04f577b, 0x870fae50, 0x99a38a24,
-	0xe5007a80, 0xe71e837c, 0xf3d8edc4, 0xd973f395, 0xbf20a599, 0x72ea5f38,
-	0xa475cbae, 0x2d2b373c, 0xee3f62b7, 0xe34ed2bb, 0xf6d57098, 0xfae3ef0f,
-	0x275ff68a, 0x3260f55c, 0x853cc7ea, 0x78e979c7, 0x5c78552d, 0xad7e8f60,
-	0x3df5a05c, 0xf445fe9f, 0xd9ab33e3, 0x8b6f125f, 0xb5eff1e7, 0xb9fdf12a,
-	0x9c87b3e4, 0x9e7ca79d, 0x4b9d5caf, 0xe5f6f53e, 0xe27ae69d, 0xf5476991,
-	0xf01dafac, 0xbe3c0618, 0x8a59f1b5, 0xc2f13e0f, 0x8748a9c1, 0xe7c01de2,
-	0x9d1b5fc8, 0x4e7a8c2c, 0x55bcd109, 0x39d320d4, 0xb384a603, 0xe51a716f,
-	0x1575c798, 0x3f12766f, 0x0d64bd15, 0x8bf7814d, 0x9c317db6, 0x76166ae2,
-	0xf05adc52, 0x072f6105, 0x1ca3865b, 0xbe3c2914, 0xfc2f522c, 0xe7edc6da,
-	0xd3b1edb6, 0x1d527c70, 0xa8a2dfbf, 0x6ad576fe, 0xc278a7d8, 0x50bb52a6,
-	0x8379f68e, 0xfe78c7c0, 0xbc67fb17, 0x2b8f4157, 0xf5c0db6b, 0x1aa35144,
-	0x8a327bc2, 0x63b4b6ea, 0xc7d171bc, 0x957ff256, 0xf3a49dd7, 0x6f361314,
-	0x794aff22, 0x8fda6ca3, 0x59df11eb, 0x18ad8727, 0x4a50d897, 0x1f0090fb,
-	0xc45eb824, 0xf8c0fe53, 0x3bcde2c3, 0x850105b7, 0xef3f2fc5, 0xac72fd42,
-	0xf10bbd79, 0x359ef50e, 0x3c47bade, 0x2223fd67, 0xc386f39e, 0x2f4b6f74,
-	0xf0c79cf1, 0xb794100f, 0x4e78e66d, 0xec87d756, 0xb667e84b, 0x47feca3f,
-	0xe9be7d97, 0x1e7835eb, 0xe3a5eda1, 0x25dfb06b, 0x0d72fb7f, 0x5db189c6,
-	0xcaf79a76, 0xe280f85f, 0xbef7f5b7, 0xc87f09b0, 0xfe29e786, 0xab13fdbd,
-	0xdf6b6b17, 0xe31d3879, 0x7cb7db06, 0xccfe8c97, 0x26af3b79, 0xadbcef7f,
-	0x94585213, 0x914f4379, 0x11e7437f, 0xb7491f7f, 0x297b0dbd, 0xd004ed9e,
-	0x5760f51d, 0x297d6e9c, 0x88f67f8f, 0xd18ddcf8, 0x88f43bcf, 0xe5b86dc7,
-	0xff512bc6, 0xf27b7037, 0xefb9719c, 0x3f2f3d03, 0x146e3a0f, 0x37f5d7f1,
-	0xf72e359c, 0xf401fe04, 0x74cdd8b2, 0xf661bafc, 0xbcc69faf, 0xc6bd3e86,
-	0x03cf86e5, 0x8a79fa7f, 0xa73e6c77, 0xa5e8e51d, 0x343c50df, 0x078a6fd2,
-	0xd3afa3e7, 0x11ca3cf1, 0xce3a73b5, 0xad3b9d3f, 0xd14fdf74, 0x9e488fce,
-	0x47beb7da, 0xce266a7e, 0xaeb3b435, 0x973f8f1f, 0x9d6b78c4, 0xd0579e3c,
-	0x3d7de301, 0xe22e7a2e, 0xeb5f397a, 0xc5bdbef1, 0x1f6d5ef9, 0xe00fee28,
-	0xb5a5c8f1, 0xb3f1107f, 0x729374dd, 0xcf075e90, 0xe3ad471a, 0x72f42dc1,
-	0xf47b1c77, 0x38aeeab8, 0x21ba08f6, 0xea9e713d, 0x3807538a, 0x49f9046d,
-	0x2e768a3e, 0x8f2d7da2, 0xa3576f7f, 0xe3d6379f, 0xf4117dda, 0x9bdbc7d6,
-	0x7b72e8bc, 0x50fc71ae, 0x4266d13c, 0xb57c4f52, 0xbf5d1f7d, 0x7f4bb4cf,
-	0xebbefad7, 0x148954bc, 0x5eeb1e79, 0x86d2cbe4, 0xeccfe483, 0xf18b7f5a,
-	0x7bff09b6, 0xc5320bdb, 0xdfa92f39, 0x523dfa4b, 0xbde1947f, 0x7bfa512d,
-	0xe7d85dbf, 0x68fe7c8d, 0x7219c97b, 0x7b6d3d40, 0x975f13b6, 0x71483c6d,
-	0xbdd66fd6, 0xe218b5ac, 0x08fe7027, 0xf6d3c619, 0xa4e1eee2, 0x30fdc5cf,
-	0x8954ed91, 0xa29bca76, 0xf1be53b7, 0xe29da9a4, 0x76e6bd60, 0x63bdbb9c,
-	0xac76ef8a, 0xb73358ef, 0xcbd58f13, 0xf6d14393, 0xd8aaec69, 0x29e6afef,
-	0x0f74a3cc, 0x7bdf938e, 0xc862bb23, 0xcce79cee, 0x112e38f9, 0xbae28d53,
-	0x388816aa, 0x537a9fb0, 0xce55de91, 0x77f618eb, 0xe0d7e231, 0x01dd51ff,
-	0x9aaaf686, 0xbf42cfea, 0xd1dea443, 0x642c2d12, 0xe73cf7a0, 0xed0f14e4,
-	0x90d3848b, 0x0f32079e, 0x67ef58ab, 0xcfabfe11, 0x0524b614, 0x5059f7fa,
-	0x7a802ef2, 0x0c5ff7d9, 0xd67b3bf0, 0x8781c3af, 0xa9bf9365, 0x0079dacc,
-	0x35ec2bd7, 0xc847ed3b, 0x7f74ecbb, 0x3b1af948, 0xd6ef778d, 0xbb239f6f,
-	0xc656d7fb, 0x556087f7, 0xb996f783, 0xb7871d79, 0x2fe6bb7e, 0xcbe35768,
-	0x1afe7ed0, 0x89eb8f28, 0xfeb4b18d, 0x8e2978e9, 0x7fcb51ee, 0xa8a9a1ed,
-	0x3963f2d7, 0x4e6fe63f, 0x7d415509, 0x6e1c49ad, 0xee8034dd, 0xc97e28ab,
-	0x7ba5f149, 0x8652beb7, 0xe6fb54f3, 0x60330c58, 0xfb09afed, 0x7ee237ff,
-	0x63d51aad, 0x642f338c, 0x2e78c78a, 0x536118a8, 0x3f23135c, 0xfa11c906,
-	0xe8e31ab1, 0xc5d8113c, 0xa84e7aa6, 0x89780f9d, 0xf8fd838f, 0x3f70aa39,
-	0xe59107d4, 0x76fdfcf4, 0xdcbd8e7e, 0xba39ef0a, 0x9d6b97cb, 0xeeae1c79,
-	0x3349f5c7, 0xe744ff95, 0xb3df9173, 0x23fe5e5e, 0x7aaedebd, 0xe265fbf8,
-	0xfe489b7e, 0x57a5d43d, 0xb4717afe, 0xf4a25bfb, 0x2fdf9e9f, 0xed05a0b1,
-	0xba762d96, 0x67ef0bb7, 0xdb0e73c0, 0x55ffbe34, 0xfdd30ae2, 0x3e843b39,
-	0xd309892e, 0x44fd3e7d, 0xc23cb03f, 0x22f2d6cc, 0x15f4bdd2, 0xb3f8c33b,
-	0x3e9cd7d2, 0xb6e977a4, 0x957f5b6f, 0xb18bf185, 0x7d2bd7e4, 0x1f117fed,
-	0xd3c35a94, 0x2dbcfee9, 0xe7f78656, 0x3b796db5, 0x4db5e51d, 0x9c27a70d,
-	0xb4af5f65, 0x57be6ade, 0x58e38c40, 0xbc42e865, 0xaf3f4177, 0x9e8bd45b,
-	0xdb8632b9, 0x9f18f6d7, 0xdde48635, 0xb1d44f7c, 0xc641c6ca, 0x9e45fbf3,
-	0x7fb17ae8, 0x9d8ffa8c, 0x38f47743, 0x263fdaf7, 0xe699ed09, 0x96407464,
-	0xfa8e3d81, 0xe4eea8bc, 0x7c1ff430, 0x6fdfa316, 0xf9c389e0, 0x73ad33e8,
-	0xcfbfea18, 0x19873bd2, 0x952399e7, 0x92a28f36, 0x8ed2875f, 0xfaf327b5,
-	0xb5378c31, 0xf7a68b4f, 0x12c4c586, 0x8e1e8afe, 0x7a8e7a8d, 0xabe70c4c,
-	0x531f6834, 0x43e5176c, 0x2d33f76f, 0x31b87a44, 0x49ebc3c6, 0xbcf8690b,
-	0x20fb6eb8, 0x950a1e23, 0x72072a6a, 0x642cf84a, 0x832cb52b, 0x2bdbd6fe,
-	0x28f0ef9c, 0xf2813f74, 0x55f8ba7f, 0x3933a6ee, 0x518e3191, 0x5c6614e0,
-	0xe7eb33f2, 0x6fd51448, 0xcc69fc43, 0x646456ef, 0xf7926a95, 0xa94f5618,
-	0x7e2ecc03, 0x43055a5f, 0xec44793d, 0x0c1fa3ef, 0x3d7c6ed3, 0x383f7a48,
-	0x328bb180, 0x4f09bef0, 0xbf80db9c, 0x3eb3706b, 0x2b69e309, 0x5317d718,
-	0x488f68dc, 0x033b00c1, 0x595554fc, 0x03df8837, 0x2f187cc2, 0xf42c2649,
-	0xf37ee5cf, 0x8083b43b, 0x843df94f, 0x1550b157, 0x86c318a0, 0x9e3aefc9,
-	0x96f3fbf1, 0xeb8ccc7d, 0x0741128f, 0x7a4ddc16, 0x7fbac1cc, 0x5aa3009d,
-	0x155b7d45, 0xdc1cb7f7, 0x59b8739f, 0x58c3ed18, 0x42c70b07, 0x1caa18ea,
-	0x2bbfca33, 0x5f03600b, 0xf39ac7ba, 0xf402e523, 0xf5bb445a, 0xf7a83f84,
-	0xbf7a88ab, 0xabf7a88a, 0xe3abd5b3, 0x2836dca9, 0x58a5ef03, 0xf02f595c,
-	0x09b3dbc6, 0x867e01bc, 0xcc7f3de0, 0xfb15e312, 0x18d784e6, 0x962b1bd1,
-	0x8e6eba07, 0xfa7e20c9, 0x4eaedc59, 0x8966978c, 0xc3d70c35, 0xbefd248b,
-	0x1877e64f, 0x1b6e63de, 0xa223e1c9, 0xcf02cd9d, 0x55bf748b, 0xb276f28f,
-	0xb7947abf, 0x263e56f7, 0x6f67797a, 0xde8d89fd, 0xea5ef89f, 0x5a8d8eaf,
-	0x4bd50fff, 0xf47daf65, 0x76efee0e, 0xa03727e9, 0x6e676cde, 0x1a54fd46,
-	0x16b7fadf, 0x4cedc27a, 0xde999a5b, 0xc0dfc831, 0x9a17316f, 0x49f2479f,
-	0xf472fe14, 0x29df7185, 0x61f3bbda, 0xe74d5e7e, 0xbe315c83, 0x9f7cb589,
-	0xdc79eefc, 0x46cb078f, 0x25dfe61f, 0xe1aeeff2, 0x0fdde3f6, 0x1b0fb4cb,
-	0xc1d5bf79, 0xe1efcdff, 0x801f07b8, 0x5f33ddbc, 0xa233850a, 0xdec5dbdd,
-	0x677a878f, 0xde44fe88, 0x9e601583, 0x68e4cb49, 0xbe7160f7, 0x45e1cfd4,
-	0x8b317fde, 0x66fdc5f9, 0x3159e7e6, 0x22dbe26e, 0x0f55a425, 0x82c79eed,
-	0xd1ef802b, 0xc7be04fe, 0x9c592ffd, 0x8d2e66c7, 0x9adfd7c7, 0xa77fd260,
-	0x70e27886, 0x8baf66be, 0x7cfe6ee7, 0x149eb5ee, 0xe54579e3, 0x1ee9ac74,
-	0x9bd52aa0, 0x3d4dfa8a, 0x80f33d7d, 0x07a76a1c, 0x1f218f31, 0x7e1256ec,
-	0x3d24f30c, 0x5084aa95, 0x3f6e2a2f, 0x37bb47cb, 0x5eb3f39e, 0xaebc4b5e,
-	0x177ccecb, 0xe6461dfe, 0x5dcfff81, 0xdff3a1e1, 0xa7fc3957, 0x5d95fe71,
-	0xa380de39, 0xb7043f27, 0xe15771f2, 0x8e7a33b8, 0x7af34aa7, 0x0ebedec9,
-	0xcbf245e6, 0x3fd86d79, 0xc8f9ead9, 0xadfbfd83, 0xd30fd0ca, 0x23de3f13,
-	0x153fc821, 0x24714fea, 0xc194dc72, 0xbc72fed8, 0xfff4146f, 0xe8bf7132,
-	0x52264aa2, 0x08b7571e, 0x34a51fef, 0x913ea447, 0x8f72a64e, 0x974a7b8a,
-	0xd5297a54, 0x56f36bf1, 0xb6983dd3, 0x36fb790b, 0xa25fa0b7, 0x402fe045,
-	0xb52d97f6, 0xed1df682, 0xde308aee, 0x60d2c727, 0xb961c1de, 0x9abf09ab,
-	0x13bf919b, 0x456c13ca, 0x66b55218, 0x7149d10a, 0xc87cb057, 0x0604754f,
-	0xe37da2c7, 0x6987df31, 0xd6711d4d, 0xf8bb31fb, 0xfbc7136d, 0xb7e71263,
-	0xa63fbc48, 0x6e307b36, 0xbb6bb1e2, 0xbc22abee, 0xe38872c3, 0x7ef93ffd,
-	0x37bc4f6e, 0xc0699b4f, 0x327b33bb, 0x0267fde1, 0x5e054bcf, 0xaa1d04ab,
-	0xc4ab3e04, 0xe255afbd, 0x812adcde, 0x3bc42adf, 0x7b888fa4, 0x3d23177b,
-	0xef119520, 0xa1d6bfc0, 0x7b432641, 0x520f0f7c, 0xb75be087, 0xb2a4fc85,
-	0xbc43efc3, 0xde39135b, 0x03a00e6d, 0xdde035f1, 0xc241f983, 0x78e0eaa7,
-	0x0e9cf286, 0xef105602, 0xa739f123, 0xb6fde007, 0x87d424d8, 0xd6784c63,
-	0x1f9fc712, 0xf3e29fde, 0xf390a25b, 0x6a25fc48, 0x5d605efc, 0x8fb37bbe,
-	0x765c44ab, 0x1197b895, 0xcd7688f1, 0xbb0fc02a, 0x3f93e398, 0x2f60221f,
-	0xfd6249a5, 0xc074055f, 0x3d8527fc, 0x74c67884, 0xb75f2c67, 0x762a5a24,
-	0x04a788ab, 0x4b0fdf7e, 0x6cb4b20c, 0xf18043c6, 0x1e641a97, 0xe1fdf584,
-	0xc8ff335a, 0x7ee2256e, 0xc893cf49, 0x56df2b6f, 0x2f7fb82d, 0x74debfcf,
-	0xe69e5bae, 0xfe10f78b, 0x35da1203, 0xb872133f, 0xfa85f902, 0x8bc3d7c7,
-	0x152c1f05, 0x223f06f7, 0x2131e7f8, 0x7ceb8fcf, 0x48e7e5e3, 0xf1e64f96,
-	0x1699898e, 0x9862bf71, 0xe309e319, 0x834cf5bd, 0xc6dad17e, 0x9fdd2943,
-	0x92b63ec9, 0x650ec6dc, 0xf8afe43e, 0xf10c1f8f, 0x7dfd70fb, 0xd78a1ed1,
-	0xeb1dbfef, 0x0e83bf89, 0x711587b4, 0xd7cca4cf, 0xef51cd93, 0xeef2ad8d,
-	0xa65fa1b1, 0xbeecfeb7, 0x73f11b69, 0x1e44e5de, 0xbfe027d6, 0x8ec03663,
-	0xc157581a, 0xc81bd62f, 0xa57a8c5e, 0xebfc49c6, 0x1be7fe80, 0x17b624f8,
-	0xc754ceff, 0x5f501bb5, 0x240680bc, 0x6a2fc130, 0xcf11d906, 0xfa0f7380,
-	0xfea956b1, 0xac2f38be, 0x8fee8f8a, 0xdf2c65fb, 0x5d657087, 0xac2bf26a,
-	0x9ef47d54, 0xef59ac7b, 0x44f314ac, 0x9cb344c2, 0x4fc2f3e8, 0x39577d45,
-	0x5fb13b02, 0x9227a7c9, 0x1cde273c, 0x52a89e7d, 0xf7de20b5, 0xcb8c3551,
-	0xe3573077, 0xfd0f73f6, 0xe49f68c3, 0x3af06054, 0x7ce983f4, 0x7d7190b6,
-	0xaedc6417, 0x04f5c7d4, 0xe715bdf2, 0x3ff13703, 0xcb0807ce, 0xdefc6a17,
-	0xe42dbbe3, 0xe4225887, 0x672151ed, 0xfd7c85cb, 0x8acbe51c, 0x297b58f7,
-	0xab9085fd, 0x90872895, 0xe0cd8f1e, 0x3fb8bcf6, 0x2ccf5f4c, 0xfba08db4,
-	0x161cab22, 0x4f94179a, 0xae0721ac, 0x768f760f, 0x7647ffa3, 0x4e03b966,
-	0xfba2cfcc, 0x2cf8a5dc, 0x37cdf237, 0x9c1759ce, 0xc8161e2d, 0x2b16f74f,
-	0xea4bf72a, 0x8957c8f7, 0xf75408fb, 0xd5fd0ccd, 0xd856264f, 0x9635de29,
-	0xe4d787c7, 0x81de1366, 0x86b19d1e, 0xb4ca5a75, 0xfbeebaeb, 0xec9feac3,
-	0xef835ee5, 0x6960de85, 0x41a17641, 0xfb88d44f, 0xc8279924, 0xc5f41886,
-	0x31268bc2, 0xd4f5eff4, 0xcde8bd13, 0x2e6f5cf5, 0x4deba292, 0xf5d78edd,
-	0xd17ea466, 0x4c17c5d3, 0x54bf9d36, 0x7a465e1d, 0x3f744867, 0xcac3b242,
-	0xd7992ff7, 0x33d19b9b, 0xec95f01f, 0xed0be030, 0xf16fdd21, 0x89e328e3,
-	0xae4793d4, 0x00d7e7d3, 0x4b343bdd, 0xfa393cf3, 0x79abf3ac, 0xfd3fc85e,
-	0x794fcd08, 0x5a5347a7, 0xd92d7350, 0x69770c23, 0x1c2ef70c, 0x0bbf7d5e,
-	0x46b87be9, 0x56af9fec, 0x74bf1843, 0x197166b8, 0x0f76d5c1, 0x2fdc66d2,
-	0x3de1741e, 0xc8d6b34d, 0x247e9fb4, 0xf14e9826, 0x399fdf9f, 0x63e21b23,
-	0x9a5dac16, 0x6b38fc8e, 0x373a52dd, 0x37c1247b, 0x59806fd8, 0x79ec8796,
-	0xbcc6fefd, 0xb43ead67, 0xdbe37bc7, 0xfdd1d5bc, 0x27f8553d, 0x779853ae,
-	0x7643ae08, 0x8674c6bb, 0xfc8e0f81, 0x82eb4ec2, 0x8ed82d2a, 0x58bad570,
-	0x2555837c, 0x280fbf44, 0x0fb571d5, 0xf0ea94e9, 0x73298b5d, 0x4f7ed024,
-	0xdbc472ef, 0x3b5f456f, 0x2d3ebbee, 0x3a0245ee, 0xbbf264dd, 0x56d77df2,
-	0xb66347e1, 0x4463f25e, 0x7c97a7be, 0x62938f17, 0x7ff9e8ee, 0x6869ffb7,
-	0x315df58f, 0xe6b4bf8e, 0xe84f92f8, 0xa11f7989, 0xcf8bc450, 0x5a1b175a,
-	0x66ce4518, 0xb3c7f389, 0xce997ec4, 0xebd7858f, 0xe3e739f6, 0x5e973e48,
-	0xfaf884b8, 0xcd2a7dcb, 0xafc0656b, 0x17a5efa8, 0x507dd346, 0xe2bb9e0b,
-	0xfc0b8c71, 0xf94cbf6a, 0xc4eda725, 0xf53fedc7, 0xce8239d2, 0x9df4a9df,
-	0x5df6af88, 0xda01e74d, 0x3ad3fdc5, 0x7c9cd29e, 0xc1c6bc3d, 0xe9de50f5,
-	0x743c919f, 0xa66857f1, 0x779e7286, 0x5e5ce7fa, 0x31d9fef0, 0xdeebec38,
-	0xe0a1771c, 0x2cd7806b, 0x2169349f, 0xc2df9bd4, 0x0d8d8ae5, 0x7b1f9196,
-	0xd1f7ac6d, 0xc6bff228, 0xb5f931e1, 0xf3965bf2, 0x4caec0f7, 0xcc99c434,
-	0xc87bdf12, 0x65efcd3f, 0x4b20ee65, 0xfa127945, 0xcc0e5bb0, 0xdbb772f7,
-	0xd3d4e3cd, 0x79c6bb17, 0xd6fd6985, 0xe8abce3d, 0x53b09e79, 0x13465bf2,
-	0x5f9e3ddc, 0x9e368e8d, 0xa58c71ee, 0xd1f1edf2, 0xb450ffdb, 0xc0595adf,
-	0x8b4fa07c, 0x79bffdc4, 0xd434fba1, 0xe3ab791f, 0xb8c32413, 0x4d8a6bf2,
-	0x35794ff1, 0x5fdf74b9, 0xed5ceafe, 0x76bc835e, 0x36cd85d1, 0x4743e5d1,
-	0xd532e880, 0x40e3dfe1, 0xf0a17cb9, 0x583d4f81, 0x11d3a72f, 0x82bc382d,
-	0xae7ddbf4, 0x3ea7e768, 0x8d53a48c, 0x1fac13a0, 0xd2740cb2, 0x7ef913e9,
-	0x07d2faeb, 0x8bfdc53e, 0x45edf8a7, 0x08b1ebbd, 0xc74465fa, 0xf383a75f,
-	0x0fd82b6b, 0xdfc2f381, 0xbbf8a665, 0xe827f15e, 0x7f47e3ad, 0x51dff60e,
-	0x944efb94, 0x1f5851cd, 0xe17387e7, 0xc17dbbad, 0x8fa2e30f, 0xf3a9c527,
-	0x04167cc3, 0x71aa3e01, 0xf1f7a3fb, 0xb682c43c, 0x974f18f3, 0xf1362e9c,
-	0x01738a43, 0xff415397, 0x211e7ba3, 0xc50d6ebe, 0xbd19ed7a, 0xd9c5278f,
-	0x185c1f0b, 0xffb34364, 0x11c1f1ef, 0x29f837cd, 0xde60479c, 0xf0bd79c2,
-	0x1b86c7f9, 0x18ea97fb, 0x79c4e697, 0xf6fcfaa9, 0xbde383b7, 0x1e1d70fb,
-	0xab7b275c, 0x8e254860, 0xbf7c60c0, 0x37f4f5c8, 0x145bdfe8, 0x68f0c4ff,
-	0xcae2f476, 0xdfa0977d, 0x99b2aab5, 0xc5d85552, 0x0ce2ed0c, 0x688f5dfe,
-	0x2b5e05f7, 0xcae2ebf4, 0xb5b7ee66, 0x70db9905, 0x323b00cf, 0x8ad8fc92,
-	0x69cf6cc3, 0x7e8dc06a, 0x83dc4d73, 0x65812aa0, 0x67e85919, 0x1a0ccc4a,
-	0x938d77f0, 0x4f2cd7ef, 0xfdc6e3dd, 0x8fd42b10, 0x9a5b33fe, 0x77e4ca72,
-	0xe5995d7b, 0xd7e93a04, 0x7ab0c744, 0x1f91249f, 0x1f8454f2, 0x1fa994f2,
-	0x7da6cd89, 0x28bc488a, 0x281dfe36, 0xb3ff0985, 0x9dfe87c0, 0x3e6ea5a4,
-	0x8fc295ce, 0xaffa04fd, 0x363b022f, 0xc1f645d6, 0x7c2c0b92, 0xe853687d,
-	0x3c6b2bbe, 0xf1c5af2f, 0xff71d871, 0x59f5c643, 0xde276098, 0xd5d32610,
-	0xf1c2128b, 0xdc2123cc, 0xe0978587, 0x5c63a37a, 0xfcf803cb, 0xd7207b79,
-	0xa6ff7809, 0x0901f36f, 0x81fc33f7, 0x35cf118b, 0x03d33072, 0x772d7fe5,
-	0x74b96266, 0x8138fac8, 0x39e017a7, 0x9f618087, 0xdcd7df94, 0xe13dcb0d,
-	0x112be60b, 0x5fdf86fb, 0xc7b7cc6c, 0x1fb02af8, 0x4acbdf91, 0xfda242fc,
-	0x074cfc41, 0x34fdff9f, 0xf2772f3f, 0x07f10575, 0x6e3ed7f2, 0x3c529d3f,
-	0x87efb871, 0xb4dd79d8, 0xbcf363ef, 0x114f686e, 0xe05ad8eb, 0x4fb0c557,
-	0xb3e2a177, 0x545d3f20, 0xfd8dcf0d, 0x2727628d, 0xf2dae838, 0xdebd76a8,
-	0x83af3c3f, 0x4f4f94f8, 0x92247b22, 0xed74762f, 0x69eff027, 0x9e33a1dd,
-	0xf1c388b2, 0xfad1ff4c, 0xfdae93ee, 0x761c45aa, 0x5efca873, 0x69fe3fbe,
-	0x99c51c6e, 0xa3b8fdea, 0xda336969, 0xf53477c5, 0xbcf8899d, 0x3fe2e0a3,
-	0xed43ba63, 0xfa8b13dc, 0xce897ee2, 0xc1f9dd97, 0xa42c6aeb, 0x475fdf5b,
-	0x2f3c1ff7, 0xeb3a71e4, 0x01fe9154, 0x7ef8d6e6, 0x47df8857, 0xae02bcc5,
-	0x715fd157, 0xdb743877, 0xf3dd000d, 0x3406e87a, 0xebefa6f7, 0x43d5037c,
-	0x893ddea0, 0xf7f494f6, 0x726fbd1a, 0x35d7bf98, 0xe346c57e, 0x8daf1ee9,
-	0x0f8fafc6, 0xeff84a7a, 0xf7b88fc2, 0xf8c7c74d, 0x77dc7c99, 0x1d75dec4,
-	0xe03acb3b, 0x3fb0db0e, 0xde3e78f3, 0x7cfc489f, 0x1fa05985, 0xf6fa745f,
-	0xe33e3f20, 0xbd45edf4, 0x4ceb6257, 0xbc920657, 0xcbcf85bc, 0xc905c0e4,
-	0x0313fe30, 0x21271702, 0x9cfb9a1e, 0xc07fbd97, 0x80fbf9ce, 0x81f7f39d,
-	0x5baf9d0c, 0xecd7c89c, 0x538d2274, 0x92c77eff, 0xbb1f87ad, 0xc4fbf81d,
-	0xbb3efcdb, 0xe373d952, 0x9697e443, 0x3e2e3199, 0xfc203d32, 0x7c5d2d0c,
-	0x433bc7c8, 0xa332f2e1, 0xc1ce9621, 0x9b2f98cc, 0x319fdbee, 0x32c3c79f,
-	0xadf879a5, 0x22c275a6, 0xb3d2d711, 0x4483f41e, 0xfe7333d6, 0x6517ba04,
-	0x471ee69b, 0x9c35917e, 0xf44e66cf, 0x608e78c9, 0xf68932cc, 0xf21f47f1,
-	0x3c00b634, 0x45ef1433, 0xe0f99d31, 0xfbc20d7f, 0xb99aca51, 0x9e45347f,
-	0x4853f993, 0xf3e1ed57, 0x1073c23d, 0xc79f0e4f, 0x69cfd861, 0xdd322b53,
-	0x38f7cfc8, 0x7207a87c, 0x827df56f, 0x22fdd574, 0x0afbbcfa, 0x171801d8,
-	0x27b77b9a, 0xb724f907, 0xd4a3eede, 0xd01894c6, 0xb30ab96b, 0x31a29a61,
-	0x0c698ec5, 0xbd9a61b3, 0x354fd850, 0xe0fd9137, 0x786bf1ca, 0xd36e79bf,
-	0xfbe35ff3, 0xb7784af9, 0xdcabe064, 0xa3bfb7a6, 0x3f3e7673, 0x565efdc5,
-	0x9fd699a7, 0xf0cdeac3, 0x38668de5, 0x47866c33, 0x65c333ee, 0x67683638,
-	0xe11ef88c, 0x86569d9e, 0xde2b2bdf, 0xf438a56c, 0xa0ae7157, 0xe93b5e78,
-	0x4dc509c5, 0x712718d9, 0x05a745fc, 0xfe3b95fd, 0x59c532fa, 0x658a6e74,
-	0xfbb86718, 0x831618d3, 0xed9bbc71, 0x18bf30eb, 0xd9fe8768, 0xb5f6cde2,
-	0xedb34f18, 0x434f9d52, 0xedb50f14, 0x4bbcfc6f, 0x086b06e7, 0x6f8e2ee3,
-	0xe445fe7f, 0xfa1be3cb, 0xaaf61d93, 0x7d60b414, 0xdd3847c1, 0x3ebd08c7,
-	0xe2f5e846, 0xfc7af33a, 0xaf6e970a, 0xfce287ba, 0xe3812637, 0x2fb2b5bb,
-	0x2577c587, 0x8c6dfb74, 0x40dd67b0, 0x7687cfcf, 0xd08879d3, 0x7ba179cf,
-	0x6bd11f35, 0xb3ea0c41, 0x0cdaa38e, 0x5c5d4bf4, 0xcea3c663, 0xcc8497df,
-	0x24ba27cf, 0xcf0ce7a1, 0xc55e3033, 0xe71524b3, 0xdfa367ef, 0x8bbd7f53,
-	0xbc2f19db, 0x20f2e9a0, 0x992a7b8b, 0xb2ae70c7, 0x79b3ef5b, 0x089e31fd,
-	0xfbb035e9, 0xbb447179, 0x2eb1fd7a, 0xda5fcf2e, 0x448279f8, 0x95638781,
-	0xe86ec8fb, 0x7d2b23b2, 0x380689be, 0x727766af, 0x776fe12e, 0xf986bdf2,
-	0xdec364aa, 0x4e30bbe4, 0x8f414eae, 0xe3b92b36, 0x498f9fb9, 0x3d72e7c4,
-	0x11f313f6, 0x6ff56d8f, 0xd81cb0b8, 0x718c23d9, 0x5735f967, 0xe41a26fb,
-	0xb9f287fe, 0x3712b74e, 0x392bcbc7, 0x9cf093cd, 0xff0d7148, 0xfd71618e,
-	0x80dcb76d, 0xcfcd5ef8, 0xcc2b67d3, 0x963c832f, 0xfaedb96c, 0xfcbcf061,
-	0xec5e5199, 0x2b71540f, 0x78de2f3e, 0x3d15ce92, 0x8efee16a, 0x0504fa48,
-	0x13fa3d9f, 0x39ea0147, 0xcb75efa8, 0x9f7f7a08, 0x239bec05, 0xdcef83e3,
-	0xb38e4505, 0xa06f0ffa, 0x9f3330f8, 0x684bdf02, 0x97ae75bf, 0xe9e8ebbc,
-	0xd19becc2, 0xa02df754, 0x8fc87978, 0x0c297eba, 0xa489eb99, 0x6fc16aef,
-	0xe4621bf0, 0x7d72c893, 0xdce904a6, 0xd07cc974, 0x43ff0693, 0x8a6aa1c9,
-	0x076c8dcf, 0xc1985823, 0xe181da0e, 0x9b972875, 0xfc169c78, 0x88b65b24,
-	0x61c41f63, 0xf915c7ba, 0xf8a21811, 0x83d13652, 0x4d99bd78, 0x37d754c6,
-	0xc3f5396d, 0x52abfcb1, 0xa2bf73cb, 0xe7249cfa, 0xdd30ee6d, 0x9c4fdb6f,
-	0x70f36f47, 0x8feeff58, 0x64d45f9e, 0xe3aeb8a7, 0xbfd23427, 0x149e300b,
-	0xb768bfcb, 0x3d68c058, 0x78cfa5be, 0xab6e538c, 0x1fa5f7e7, 0x5e33efab,
-	0x1ebccb3b, 0xf9f44fa9, 0x39fe20f6, 0xbe7afd1a, 0x83ce1726, 0x771c788b,
-	0xcc8a9f4a, 0xd274288a, 0x2ad44bdf, 0xd3fd7132, 0xbbc38f79, 0xcc14f08e,
-	0x9fefc850, 0x5c9a7e4a, 0xe83a9fe1, 0x02edbff6, 0xaca139ba, 0xec25fe0f,
-	0xdfa1d793, 0xfbd90bf3, 0xf7507b80, 0xacacfd3e, 0xa3df9d00, 0xfb40f40f,
-	0x56161533, 0xe266df80, 0x609c353c, 0xae674f9a, 0x719e2896, 0x78f372d6,
-	0xe36ebef0, 0xaac05afc, 0x5622dea9, 0x6ac1694f, 0xce217e73, 0x273c2e47,
-	0x8a76e3c7, 0xfaf9cd6a, 0x8d92c0b9, 0xf0d1ac67, 0xc7d335f6, 0xc702fbe7,
-	0xa36cdd27, 0x2ab7ddfe, 0x6977ef8e, 0x6df387cc, 0xe9272ae7, 0xa01662ff,
-	0xe629dc7e, 0x7307f2fd, 0xed20b37d, 0x37d33f98, 0xcb9e0fab, 0x2d23f3e7,
-	0xf99e4919, 0x13c57ebd, 0xbf007859, 0xbce187cf, 0x8524dc5b, 0x036c2187,
-	0x9fc11d51, 0x3826bde3, 0x3679e37e, 0x6e38fc7d, 0x3ef673e3, 0x9e116fa7,
-	0xb8f9929b, 0x0225f98d, 0xad1b251f, 0x98d17f26, 0x79d0528d, 0x6aaf9e39,
-	0x1acaf7a1, 0xf54d58ce, 0xec1d798a, 0xba076601, 0x2b58298d, 0x755660e3,
-	0x25d0f1e9, 0x1ccbced1, 0x755c7810, 0x945f5e5b, 0xbed1c7db, 0x9d1027ed,
-	0xf84a7a43, 0x06d858a3, 0xec8cc5ed, 0x7b3f2982, 0xe2938721, 0x26a6bd1e,
-	0x4a2fbe8d, 0x653361fb, 0x0e789bff, 0xd03e32b3, 0x99da0e37, 0x2ba5f169,
-	0xc1bebf24, 0xcf9d6fe4, 0x88e4f0f1, 0xa22a4b8a, 0x3a75b7ac, 0x53d5213f,
-	0x3b70409c, 0x599da79f, 0x20c06a9d, 0xb8e32317, 0xd3db8cbe, 0x3a8fe742,
-	0xfe744ab7, 0x20e929f9, 0xea7e0f9d, 0xff430f5a, 0x09d02a40, 0x1253eff5,
-	0xfcf7845b, 0x34dc3565, 0x73a40de7, 0xe3178c56, 0xc61b4a0f, 0x1a0ea5c9,
-	0x62e3b73f, 0xbee2d62b, 0x218cca54, 0x61df9023, 0x866e33dc, 0x3ce3a3e7,
-	0x075f5ed4, 0xc2ea7ba7, 0xa1dcc660, 0xce7fbed8, 0xc38f281b, 0x7cbce862,
-	0x99cae00a, 0xb432e940, 0xe65952cf, 0x5333b46e, 0xa04678a7, 0x8b957f4f,
-	0x916493b7, 0xf684dc67, 0x270e08e3, 0xd6f92c3c, 0xa0ae1311, 0xfcac5276,
-	0x1cf87a93, 0xfa1b4ded, 0x7a061c27, 0xc4c8a84f, 0xf10653f6, 0xa70b5134,
-	0xbbfb3d61, 0x75a01ee8, 0x23373cc8, 0xbbef3d7d, 0x2eb82971, 0x0b06dfdc,
-	0xfb63d075, 0x97fdf4d3, 0xfbec83b0, 0xf2f0870b, 0x97994ec2, 0x24e7cfc9,
-	0x15f6eba6, 0xfaa1d72f, 0x5ea246e2, 0xf9db8f7d, 0xe47c395f, 0xeb42bf07,
-	0xa0803ce5, 0x58e9f953, 0x0bcc3216, 0x21bed3e5, 0xb4fcb3fb, 0xef1cf4cb,
-	0x95c63509, 0xa1ec1497, 0xb2943bef, 0x509f3a66, 0x838e6f5a, 0x7a2622bf,
-	0x979f3abb, 0x3059969f, 0xf99abb6a, 0x2c3ee9f9, 0xb95a27d8, 0xd3f3f364,
-	0xfc6e1992, 0xe8539456, 0x7169cb39, 0x0a71fae1, 0x67a847ce, 0x7aa09642,
-	0xda5d3779, 0x79a62ddd, 0xe1c3dda8, 0xa8bfb10e, 0xb7f5ebe7, 0x39c4d34f,
-	0x7bcf7e3d, 0x2028255b, 0x4dd3cfc0, 0x5ddfc927, 0xf09bb4d2, 0x3745f3a3,
-	0xd059629e, 0xaae4a780, 0x6405b0e6, 0xfdb8e9fc, 0x025e874b, 0xcba3d924,
-	0x7d4b3bf3, 0xbf1f2163, 0xef90616b, 0x792eacd8, 0xcab37527, 0xf0fd0b22,
-	0x6389d2ee, 0xdf2f308d, 0x35f37efd, 0xb2b78113, 0x6bf7f286, 0x6b7bdee3,
-	0x7506c621, 0x4ce83b9d, 0xb00d3bf7, 0x0076022d, 0xbb00cc3c, 0x2313f223,
-	0xe02353f2, 0xcdbe5e34, 0xbd974e19, 0xfb8e6d8c, 0xf4051ae0, 0xf0df5b5c,
-	0x6479bc74, 0xd747d579, 0x4b8ef7e0, 0x7bf7f8b3, 0xaf249acb, 0x65a3d064,
-	0xe4871e5e, 0x3368b6f0, 0x9a1e2287, 0x507d44df, 0x71b928d2, 0xdfa8e0fd,
-	0xdf182612, 0xabde18f3, 0x92d3ebe7, 0x5ef483fa, 0xb10ff5af, 0x3a3f3c90,
-	0x772a73e4, 0x362dfdae, 0xaf3dfcc5, 0x52bbf6de, 0x50b7812d, 0xc7f7eadf,
-	0xa8f96db7, 0x20aa7bfb, 0x7d7ded7f, 0x469f497b, 0xc72f5b9c, 0xe5ba38fe,
-	0xa3e3c745, 0x7dd14e43, 0xd6187fba, 0x079a01f4, 0x2e4ef3b1, 0xff75abc0,
-	0x14787a54, 0x27785fda, 0x4f1fce2f, 0x704ba148, 0x059a7a5e, 0xef76c12e,
-	0x3768bd29, 0x80ec6a7e, 0x5e0cf2da, 0xdc4df309, 0x01ffc249, 0xfc00cb67,
-	0xc7e9dd64, 0xa4e1c2ff, 0xe609ba16, 0xafefeab6, 0x1ecdefc1, 0xc032d018,
-	0x8ff7f002, 0xe0993a5f, 0x419e5a8b, 0x04eac2f8, 0x196b0f0e, 0x03fbc320,
-	0x23267d83, 0xa3bbd6fd, 0xa109fdcb, 0xc5fef46f, 0x891df60e, 0x84aafb43,
-	0x2c783bcf, 0x757a06da, 0x4db1d17a, 0xd31f01eb, 0xf49623ff, 0x5bb6fadd,
-	0x1e13f3ae, 0x6f8c7e82, 0xa6f8114c, 0xbbf49179, 0x5f44f642, 0xba130b9c,
-	0x6f4ce9e9, 0x71bcd0f6, 0xb416c569, 0x0fa6521f, 0x55e379a5, 0xee27ef97,
-	0xe9e9dd51, 0xc4fe9e24, 0x5bfae6ed, 0x46bc50b6, 0xb24e43ca, 0xdf171eab,
-	0x23b90067, 0xba0870fe, 0x3c7cdc58, 0x73190dff, 0x80001bd1, 0x00008000,
-	0x00088b1f, 0x00000000, 0x7dddff00, 0xc594780d, 0xbbbcf0b5, 0x26effeef,
-	0xb24d9bbb, 0xf379f909, 0x71100843, 0xa9189313, 0x18884dd6, 0x220bb531,
-	0x49716b62, 0xc93049f8, 0x2d16ad46, 0x544859bd, 0x46d10882, 0xe1b80a04,
-	0xfd2b6202, 0x1a8c4582, 0xf68882e8, 0x72dfbd2b, 0xbd3fadeb, 0x8a7e1bd7,
-	0xb4564288, 0xeb6dea5c, 0x2666739d, 0x5c9377d9, 0x9f7b7aa8, 0xbe8f8be7,
-	0xcef33bce, 0xfe73399c, 0xb3339ce6, 0x9086bb1a, 0x258e4264, 0x4ec730dc,
-	0xe631df9f, 0x224c9d15, 0xf433bba4, 0xc84b499c, 0xc421127b, 0x09f04845,
-	0x0e7b6853, 0xd1eddf21, 0xb4897504, 0x734de1de, 0x44b2d116, 0xc345bd7c,
-	0xd57fbde5, 0xd2b3e5de, 0xd32d3172, 0x9912abe7, 0xbd33f58b, 0xfe5a0e69,
-	0xa7aefe02, 0x9f561ee5, 0x58ad25ae, 0x7fbec39f, 0xe5dc84aa, 0x76d4cfa3,
-	0x7d296e3a, 0xb5b89dae, 0x916b8e9d, 0x0bca1789, 0x5d6c16e7, 0x736a614e,
-	0x897842cc, 0x51269bd7, 0xe6364ef8, 0x76d1566a, 0xc8afa7bf, 0x515c8435,
-	0x97b0cde0, 0xff40f9d1, 0x44d21c74, 0x3c369527, 0x37981cfe, 0x7ad7afad,
-	0xcf3a64b3, 0x39fe1ddb, 0xe35ebed0, 0xd0b4429d, 0x77c0b789, 0x8823b405,
-	0x3b76399f, 0x40f227b6, 0xffffbc19, 0xb8954f08, 0x4f115fee, 0x7534ef77,
-	0xf8242c9d, 0xb7fd05f7, 0x2aa1d7b9, 0xbad2fa07, 0xcb871a4e, 0xd0ffc377,
-	0x24ad4871, 0x2c3a1493, 0x8d6e22ab, 0xbfe836ff, 0x7a07e979, 0x513781a2,
-	0xf02ff43d, 0xeb0a4ebe, 0x82fce952, 0x76cf24fb, 0xb2cfdec2, 0xe8959211,
-	0x21e613bf, 0xc3f79ee0, 0xd17f34e6, 0x3f2c7cf0, 0x76e6a978, 0xe4b79c5a,
-	0xf4edaecc, 0x590f79fb, 0xdb865108, 0x9d711ed3, 0xb8cf7fdf, 0x9f495c9a,
-	0x86b0defa, 0x19fdebe2, 0xb69cb3c4, 0x1a435f7b, 0x73efff00, 0x743f95bc,
-	0x853211f7, 0xb5d95f90, 0xd0499df8, 0xbddbe483, 0x53b7e288, 0xd0234122,
-	0xd23d4cc3, 0xd28860c3, 0xfeb095c3, 0xfbe87d74, 0x872707ee, 0x067d7482,
-	0x619100c9, 0xbec4153e, 0xbfa9895d, 0x29eb00a3, 0xb44d049d, 0x0e68da3e,
-	0x5e80956d, 0x50a5a028, 0x5feb093f, 0x07fad895, 0x38e230ef, 0x1d1933dd,
-	0x433a3776, 0xb6001cc1, 0xc6de008b, 0x7694a3a2, 0x64487482, 0xb69994ef,
-	0xe36c7c61, 0x3a52c172, 0xb4dbe2f0, 0xe4dab23f, 0xb01f4f19, 0xbb943284,
-	0x4a3c7152, 0xbe91ab0f, 0xfd470664, 0xab42d38f, 0x394f5c70, 0x36a3cbac,
-	0x1f787cef, 0x014591fd, 0xc89937f8, 0x7d09634a, 0xe8c3a44a, 0xe1c0eba4,
-	0x134f5d21, 0x60bb83a0, 0x7f878a00, 0x536f386f, 0xd89ffbe8, 0x08038425,
-	0x484e58cd, 0x75f5611d, 0xa4c72ccb, 0x86d4f029, 0xddf4090d, 0x03bc1bca,
-	0xd972be82, 0xf3fb48d3, 0xeb22ba73, 0x83c036a3, 0x804bbe1f, 0x29b73ffe,
-	0xefd32856, 0xd3f2c0a7, 0xbf870bef, 0x7df039ff, 0xe0c7c019, 0x65166d27,
-	0x1f8c34bb, 0x80b9fcf1, 0x6f69ebaf, 0x9c6278ec, 0xd98f7ef8, 0xf007ffbd,
-	0x4e1ef145, 0xb45e0174, 0xf0f1aeb8, 0xc7d1f4ba, 0x5e7eb44d, 0x82b1d69b,
-	0xd4bfd3e2, 0xf015f386, 0xbd1a95de, 0xec8de48e, 0xa5a594ff, 0x2ff9865c,
-	0x964f7465, 0x62e22819, 0x2e1fa2f1, 0x485dd253, 0xd23587a2, 0xf0e5ef28,
-	0x517f8001, 0xf8f7cc77, 0x621abfdf, 0x21be09db, 0x3f07148a, 0x92452ba7,
-	0x12fcdd61, 0x3ebd375b, 0x56e40f3a, 0x9f02dc3c, 0x8de5c6ff, 0x7c788ba0,
-	0xbbe01bff, 0x5dbe246c, 0xe84c81fa, 0x80d4bfd7, 0x9fef8a78, 0xf77e1090,
-	0x4d0489b4, 0x4bd6ee94, 0xfaebd212, 0x90212d07, 0xe8a6839b, 0x6067c00e,
-	0xdeb88dff, 0x0acd1ae7, 0xea364da1, 0xf705bf19, 0x171f18db, 0xdc80140c,
-	0xece7473b, 0xee73eba5, 0xa09eda37, 0xa4208024, 0xadda37e5, 0x5ee7ff40,
-	0xb3f589be, 0x5a10a2dc, 0xe986000e, 0x7fe081b8, 0x578a11b6, 0xc7119669,
-	0x0a57b13f, 0x8fbea019, 0x5e4639e2, 0x36ffa39e, 0x8dcb0c94, 0x3800a841,
-	0x07082cfa, 0x8e23699d, 0x59335df7, 0xd16fc745, 0xad0d5e48, 0x2932596f,
-	0x31e0ced4, 0x16d5cac6, 0x4a90e90d, 0x45bff986, 0xdee0bc73, 0xa7275622,
-	0x60ac7970, 0x851243bb, 0x3ab8c9b3, 0x05fa05a2, 0x4bf5a03e, 0x78673ea0,
-	0x7f565a1d, 0x479817f4, 0x7d351ecb, 0x9eaf3d34, 0xba5892c7, 0x17a619ca,
-	0x17c3294b, 0xf1a126a9, 0x2f1b5e14, 0x21226a5b, 0xe963e02d, 0x2ae27234,
-	0xc0e0f4da, 0x5b23a074, 0xa3a92f69, 0xe269c0cf, 0xa7b8510d, 0x36bcf7f6,
-	0xd477b68e, 0xba613244, 0xcdbfa581, 0xf0d5793b, 0xaf380b3a, 0x4b427fe9,
-	0x7e1e38ac, 0xeef14147, 0x89bb62b6, 0x7d88aeb3, 0x92efc0ae, 0x0f2f4c35,
-	0x1fe02bc0, 0x75cde999, 0xfd526f5c, 0x617af28a, 0xafd404d7, 0xce40ffa0,
-	0xf4c0953d, 0x903dc831, 0xaa8e6d33, 0x9e741cab, 0x14d56766, 0xc71b1947,
-	0x27e98367, 0xa788fea1, 0x243d78eb, 0xb5e6a5da, 0xc75ab716, 0x0cf9476e,
-	0x90dd16f1, 0x2c88e4c8, 0xafd17961, 0x10ab3d75, 0xe6e9193e, 0x2839cdde,
-	0x97481b97, 0x89bce81e, 0xc740f484, 0x98248c8b, 0x1162e940, 0x9f48966d,
-	0x881bd78b, 0x8d7eb312, 0x89b97521, 0x49bb85cb, 0x7bbfbf04, 0x357d5c67,
-	0x7d68db09, 0x2d8491b3, 0xd755ecf0, 0x8e7d50b7, 0x85f7d67c, 0xe93df621,
-	0x8bbdf366, 0x3aa3bbaf, 0x79d3f5a4, 0xdd51306f, 0x5d0684ea, 0x97533eb8,
-	0x267ae0f5, 0x1e737896, 0x2bf2bd06, 0xa52b679d, 0xf5f03fdb, 0x6639f812,
-	0xbc00aaaf, 0x9c1ab59b, 0x0361f47f, 0xd524e7e2, 0x6bfeb0e3, 0x59aee41d,
-	0x8dae79f4, 0x8075f378, 0x2cd67b26, 0xaf3c48db, 0x00d4c57a, 0xd0e0d374,
-	0xd32ae8a8, 0xf972c3a1, 0xe5ff8e0a, 0x1cd6d096, 0xa014f744, 0xa15cf2a7,
-	0x9994c957, 0x474c7cb4, 0x6e5a3bed, 0x43f56399, 0x4f60037f, 0x0efdf2d0,
-	0x77eecf26, 0x453d71e8, 0xd057cc59, 0xfb071d0d, 0x9ec55f33, 0x43658e02,
-	0x74609fed, 0xbaf0f5c3, 0xea0f7346, 0xd5fa21e1, 0x22dfa410, 0xfaf01e9f,
-	0xf32b970a, 0xf8a16ec1, 0x1412857e, 0x2f608fc8, 0x3e295fb3, 0xe5a52de6,
-	0x79174e57, 0x67402956, 0xf2bcde4c, 0x4159331d, 0xccf37c87, 0x27fb1f4f,
-	0xb4fe7f5a, 0xfad0315e, 0x746b4005, 0x88915efd, 0xbe0bc617, 0xbe810868,
-	0x7b33d26c, 0x15ff69b4, 0xfbd19ecc, 0x71842c37, 0xc079d05e, 0x084a69de,
-	0xeb03b73d, 0xa2943cd3, 0x863aabc9, 0x16cbe0cf, 0xf439bdf6, 0xa0bb9fb3,
-	0xa413d53e, 0xff26a3ed, 0x74d75846, 0x7a889283, 0xc25ad7f9, 0x381709c6,
-	0x878f5e28, 0x9c7ddd98, 0x4e304956, 0xa1fb0dbf, 0x90b69a7c, 0x33a273f6,
-	0xe543e715, 0x2759da2f, 0x82b618d6, 0x34375dfc, 0x8fed84ae, 0xd3d37ceb,
-	0x8bf8f968, 0xb4e59ec5, 0x0fa7d06a, 0x073d29eb, 0xafbb32d6, 0x016ca35e,
-	0x16fd90fc, 0x8f58879c, 0xb5c59ac0, 0xb2581f50, 0x8f9016ec, 0xc839f163,
-	0x3723127b, 0x166891cf, 0x86c6d3f0, 0xe830dedc, 0x1e89fe95, 0x4dc4af54,
-	0x8dd29f17, 0xa93db59d, 0xee8df863, 0x5f3d21d3, 0x1740ff6e, 0x43d33972,
-	0xca804e30, 0x0ff82265, 0x594c72e5, 0xad995a3b, 0x5495e063, 0xeba9df6e,
-	0x47fc1253, 0x9e5a5d60, 0x97f78ffc, 0x145e302a, 0x4ae922e5, 0xa93cbe46,
-	0xba03cef3, 0xf5875475, 0xfd7a3175, 0x99d983a4, 0x076e06f5, 0x963eb092,
-	0x797d450f, 0xc5ee9a95, 0x7fa704f3, 0xf7c9845b, 0xce1af591, 0x401ab71f,
-	0x20654d8f, 0x23d06c93, 0xc15fe856, 0x0e9ea7fe, 0x3969ebeb, 0xbf58597b,
-	0x4f813f88, 0x46c3be28, 0x1b93ef3a, 0x29bf8c6c, 0x459fa01a, 0xe5f50415,
-	0x63b52d22, 0xd2bde04b, 0xe5d74037, 0xa40e8bd4, 0x8a67f22f, 0xf9ef8a15,
-	0x5033b784, 0xb1ca97bb, 0x30a43a97, 0xafe60bec, 0xe5356c37, 0xb57b5f00,
-	0xcdcf5836, 0xf9b1ca12, 0x1b05951d, 0x9ec97968, 0x13fd702b, 0x2e5d182a,
-	0x2f503909, 0xb1f2e54e, 0xa3d210de, 0x8933fe1d, 0xf6883ec0, 0x1374f68f,
-	0x64ad28fd, 0xae401e24, 0x1421e8ab, 0xd1f6a653, 0x57265ed4, 0x24e79509,
-	0xf2126ec6, 0x8938e41e, 0xf4d503b3, 0x88fa1411, 0xa4a23dc9, 0x7213dc82,
-	0x97dd98f9, 0x3e3b44e8, 0x97d6153f, 0x9b9327ae, 0x6bc425bb, 0x7d456933,
-	0xd0c0f422, 0x9c8f5cb8, 0xbe9906d2, 0xcf813c32, 0xae0e677c, 0x8bd212eb,
-	0x95e844fa, 0xdf20e8b1, 0x88fbe1a9, 0xbc60e9d1, 0x9afec153, 0x75f0934e,
-	0x65a6bc74, 0x853cdc24, 0x50536d3d, 0x693d323f, 0x9e127a64, 0x97d0cbe6,
-	0x5e31faf1, 0xc1ebc61f, 0x77d33d54, 0x3d859d62, 0xd98d3a93, 0x85975301,
-	0xfc08a4b4, 0x94eade35, 0x26bb61e4, 0xa8d18ef0, 0x1f65095c, 0x9ef905c9,
-	0x2a62f950, 0xc4c80fad, 0xa1657c0b, 0xefa1e978, 0xb7fb7337, 0xd7cd9527,
-	0xabf467ad, 0xd8a47d93, 0xc112eb0a, 0x99346f7d, 0x051e81d8, 0xe8db373e,
-	0x1df02577, 0xefa1b7e3, 0x1cc3a48d, 0x2bd57df3, 0x173fd426, 0x0c85b65e,
-	0xb3f88f68, 0x94bfb41d, 0x4ed01bdf, 0x0d8af73d, 0xae39e9f5, 0xefc25d0f,
-	0x7e611e40, 0x41aebe16, 0x008e3552, 0xc6334bed, 0xf6140881, 0xd983b359,
-	0x21ed2359, 0x99139f5e, 0x80cae8c3, 0x8e0bcdfb, 0x4ca00781, 0x7fa021e1,
-	0x7e32716e, 0x5699ec0f, 0x3efa43fc, 0x187ab3e0, 0x40c5fdf6, 0xf7ed06af,
-	0x7d2918e7, 0x8b2ed74d, 0xd1e7483e, 0x83b5699c, 0xfeceab7e, 0x41dddfd7,
-	0xd1ee1fcb, 0xf3ac0311, 0x497369f6, 0xb7f2d8ee, 0x3e3ba431, 0x772fc310,
-	0x9b9754ef, 0x40e5d57b, 0xbf7cba9f, 0x653ae6d3, 0xf9e1d941, 0xc1b5d282,
-	0x87ba7ad0, 0xd5786bc2, 0x8668fa80, 0x1390ffd3, 0x7a26ade4, 0xc86cf018,
-	0xf80a78fe, 0x9ffd023b, 0x5034f048, 0x31148a36, 0x5f5f03fc, 0xb6cfcd30,
-	0x61b7828f, 0x06a311fc, 0x75ad4cf1, 0x173944f6, 0xd2e27ce0, 0x403c3f7b,
-	0x9668bfe7, 0xdf02bed9, 0xcacb6b78, 0x18449ec1, 0x4dfd6049, 0x8bbec21f,
-	0xf5846bb6, 0xb693353f, 0xac3570a3, 0x89b0fa67, 0x6f801244, 0x69dda85b,
-	0x1bfc4ba4, 0x77776fce, 0xf4c3cb44, 0x359dbb7f, 0xf94e0113, 0xe80fb22f,
-	0x37e851e3, 0xeade4ec6, 0x4bfc7264, 0x463299fb, 0x02b699f8, 0x038d9afe,
-	0xfe3a4afa, 0x0cf97ff5, 0xa5e2fde5, 0x823ee1af, 0xb33e63ce, 0xc80a4dab,
-	0x1e0fc5a7, 0xdf62f7c0, 0x8ad32a76, 0x36d7b6fb, 0xa1d95818, 0xcda9f2c7,
-	0xb8b95f6c, 0x3cc10a57, 0x931759a5, 0x6c2f412a, 0x640dd9d6, 0xf1e35e24,
-	0xb7a6c1f8, 0xf5efc013, 0xf61d2201, 0xc7b3127b, 0xb809adec, 0x135a507f,
-	0xac0cbec0, 0x9043f1bf, 0x6b378b8f, 0x902f603d, 0xcff4367d, 0xc37cde2c,
-	0xe85685c4, 0x4aa4d3e7, 0xb96d13f0, 0xd0543c01, 0x7e6217ce, 0xf4f5c89e,
-	0x6ae5bcbd, 0xd0f1f805, 0x62ff0666, 0xd0077187, 0xd17ff5d1, 0x1ac97f22,
-	0xb93b07e2, 0x089def5b, 0xda6cad7c, 0xe7d61d3e, 0x1ae99983, 0x224bbf6c,
-	0x638bc076, 0x5fbc0a69, 0xe03ec92c, 0x8df586e3, 0x4f76b1b5, 0xc7f9939d,
-	0xa597b32a, 0xaf91580c, 0x6d3e80e6, 0x08f94cde, 0xdef59fc6, 0x0d70eeef,
-	0x6b3495f3, 0xa1532dfd, 0x1e7567ff, 0x7b21bbe0, 0x90b7d366, 0x4c2fe0be,
-	0xe398b5f1, 0x99f2abeb, 0xa4f822c1, 0xeae400b5, 0x05ad15e2, 0x8cec51f6,
-	0x44d93e21, 0x213272f9, 0xf9129da7, 0x1993fc02, 0x63bed54e, 0xb59a7dac,
-	0xc67a8350, 0xedde21e8, 0xb74a99f4, 0xb71fb0c9, 0x6f58c925, 0x7d23d24b,
-	0x77ba7fcb, 0xbce86fe7, 0x2ffa749e, 0x26ccbe80, 0x6bd062de, 0x455ed44a,
-	0x35405acd, 0x136461da, 0xcc89afb3, 0x92eb85fc, 0x31558ec9, 0x125373fb,
-	0x39504fdb, 0x73f405f1, 0x1f3fddee, 0x64b6fc06, 0xec053c7d, 0xcfc5c085,
-	0xb35fe0f4, 0xdf284bf6, 0x011f1ead, 0xcff409ba, 0x868a0b24, 0xc3c072e5,
-	0xbcfc46f4, 0x98e924e6, 0xb145751c, 0x82974a9f, 0x41076ee5, 0xd4b8da7a,
-	0x46fef68c, 0x4004c857, 0x2b7cadff, 0xee46a7ec, 0xfb6e340f, 0x740b5785,
-	0xe3ec921e, 0xfe30aca1, 0x17986c18, 0x3e71d2d2, 0xc41796dc, 0x8f4a9ef2,
-	0xb759d696, 0x5ccae3fd, 0xce9f53c0, 0x9eaded03, 0xdf980481, 0x244edb87,
-	0xb61afcc0, 0x0dde7169, 0x16524fa1, 0x09cb0d16, 0x905fc69d, 0x5d827604,
-	0x42f8c2b2, 0xedb87c5e, 0x560594d3, 0x7d403fe6, 0x5e3a3a5a, 0xc9cacecc,
-	0xdff5fdf0, 0x6672eb64, 0x72042197, 0xf9898cf0, 0x33bb45f7, 0xaeffa636,
-	0xcdfe124b, 0x3fd02cde, 0xa2796543, 0xf7c4e406, 0x2efe6ced, 0xf0166f7d,
-	0xba9247e5, 0xb52b259f, 0x52e54424, 0x84894ae3, 0xf33fcca8, 0x20594bdc,
-	0xfedc3fff, 0x0c5d5652, 0x89dff17c, 0x6a498de7, 0xaff09a7f, 0x0ce1f4ba,
-	0x63ceaf18, 0x31cc7e60, 0x3da2abfc, 0xa4fccf59, 0x816b9483, 0x8377c50e,
-	0xd82f660d, 0x18c483bb, 0x5d5b9702, 0x7ad7f73f, 0xd82ef9bd, 0xe3ef88d7,
-	0xf40d5ffa, 0xfa92e144, 0x5827f424, 0x9f28a28a, 0x77fcb4bf, 0x918cf5d1,
-	0x8d9d74ff, 0xc6cd4eb0, 0x0471e1e8, 0x780f43e9, 0x6558b7d3, 0xed2957d0,
-	0xf7a2be8c, 0xe59f706b, 0x814c2732, 0xdd3e80b8, 0x76f9056d, 0x43b9817d,
-	0xb3ef0893, 0x333ed042, 0x0bbf10bd, 0x0ffa3156, 0xc3f410a6, 0x095691a5,
-	0xe676b4fd, 0x20a8cfe7, 0xf8b455f6, 0xe76624b3, 0xbd6789b8, 0x5fd70f36,
-	0xc70738c2, 0x400fd08b, 0xcf2f2047, 0x23a44648, 0x7b425fa9, 0x9de9ab54,
-	0x458efd07, 0xbac52b57, 0x2a1aba72, 0xeae89dff, 0x23c74149, 0x20afcae8,
-	0xa38db95d, 0x23f715d3, 0x127b765f, 0x36bec1f4, 0x2d6be395, 0xfbd13f97,
-	0x2eafc28d, 0x796b7cc1, 0x6b46b57f, 0xc47a0b58, 0xd638fba3, 0xda89bc3f,
-	0x4a7fb0c5, 0x3e9ebb03, 0x57cfb5c7, 0x6448dd70, 0x9608fc00, 0x2fa88dab,
-	0x7244d31f, 0x9d498ec0, 0xe81bbad4, 0x515e7523, 0x0bee3b49, 0x17a01c33,
-	0x7fa2d740, 0x1f34e974, 0x1c5823b3, 0x8f533a28, 0x07969cfb, 0x8ecc7d2b,
-	0x097e41a8, 0xa02936ac, 0xe7f5a707, 0x08fa072c, 0x031e232c, 0x86cf71d2,
-	0x9dcfe045, 0xac80f56d, 0xb225f113, 0x9d77cd52, 0x05538b12, 0x0f18226f,
-	0x0d338e1b, 0xe821f96c, 0xf422c6ff, 0x8ff90c9b, 0x8dea09f3, 0xd6438dcb,
-	0xde2136ad, 0xd068fc45, 0x25741146, 0x3fb191fa, 0x7a646892, 0x407ca468,
-	0x054a73ff, 0xa1eb7f11, 0x3cca2e9c, 0x5ff823de, 0x456ca3c4, 0xc8b01cbe,
-	0xbf399c2b, 0x049c4332, 0xb36c77fc, 0x00fd8416, 0x19598dfa, 0x694fcadd,
-	0x50e92028, 0xaaab9ffb, 0xbcca6233, 0xc1f7d0fd, 0x5f573755, 0xa877fa8b,
-	0x7aa6c01e, 0x26bd9459, 0xc355e205, 0x83b532f5, 0xff127d8d, 0x1be6e2be,
-	0x941eaaa8, 0xee7ff8c4, 0xd11f82f4, 0xc5e35444, 0xf5c727c2, 0x5bfda3af,
-	0x383ede15, 0xefe826ee, 0x7e5112a9, 0xe14bd3a0, 0xf753ab5b, 0xdfe52887,
-	0xf78c4143, 0xaf0e537f, 0x6c319d5a, 0xe17b501f, 0xc36549cf, 0xefa3c276,
-	0x495d76d5, 0x3fd8b2c7, 0x15fe83d5, 0x92e03efa, 0xe7890ed0, 0xf49704d7,
-	0x656becd5, 0xe09d7d84, 0x74f5f662, 0x2fba4960, 0x581df941, 0xdf6023e6,
-	0xe9c4bb52, 0xe3e4bb42, 0xfd680753, 0x1f9f59b9, 0xbb40a71e, 0xbec1e67b,
-	0x4651702a, 0xa9d81bf9, 0x6f94490d, 0xaeccfd8c, 0xe31cfaa6, 0x967e8205,
-	0x38fd39d8, 0x97fc0482, 0x32a4fbdd, 0x5a4277a0, 0x6ba36eb3, 0x379703f9,
-	0xfbe1c713, 0x9779f8cd, 0x205f98bb, 0xa1b55850, 0x26dffa00, 0x5617b011,
-	0x594f1e15, 0x63a9fb80, 0xbe630b29, 0x0a7bec6b, 0x53b8d9f1, 0xcb1e2a37,
-	0x7804e1a9, 0x45f9796c, 0x338dc82f, 0x42650921, 0x04ea1c83, 0x41a1b6bb,
-	0x29211603, 0x03bfcd0d, 0xf5731fe3, 0x5f9d3c64, 0x8177d706, 0xa706b79d,
-	0xbfe9bcc2, 0xd1b57d12, 0xc4e508b7, 0x2b46b9c6, 0xeb0a91c6, 0xd83c41ee,
-	0xc3c05ecd, 0x34aac2aa, 0xe665a718, 0x4dc63b74, 0xf5073da8, 0x077e0f2d,
-	0xae0245fd, 0x1aba7d55, 0xa9ca77b0, 0x0a0bf75d, 0x4673a677, 0xf5f2878d,
-	0xe2eeed38, 0x5710acfb, 0xff8e5d1f, 0x174664bf, 0xf82f921d, 0x8ff452ed,
-	0x677f5892, 0x1fb31f76, 0x55e9716f, 0x5c5bf1fe, 0x36bdaecc, 0xe4069918,
-	0xb01e5fb2, 0x201d5d80, 0x5f604fde, 0x65567c4d, 0x9313ae3b, 0x0536ae5f,
-	0xd74666fd, 0x425763c0, 0xee32b5fd, 0xf03c8867, 0x5cf71863, 0x8ab3cba7,
-	0xf2803e70, 0x90214583, 0xfe5cfbc7, 0x96fac2ef, 0xdcf57b73, 0x831637cb,
-	0x5fd8517f, 0x5099cf9d, 0x94da766f, 0x4e406b27, 0x796649fe, 0x6468c603,
-	0xc967ed1a, 0xb71c4ee7, 0x84ea14d3, 0x68f60ff5, 0xeac9beb1, 0xdbf4045f,
-	0x29faeb78, 0x0d608798, 0xd51e8015, 0xd008bab9, 0xa0bedd31, 0xf2e8c51f,
-	0x4f238811, 0x2597ce0b, 0x767117d0, 0x63f034cd, 0x85c5bee1, 0xce2adc7e,
-	0x1529e31f, 0x2b22329c, 0x34917c74, 0xf9bce76c, 0xbc32d9e7, 0xc68ff614,
-	0xd5eefcc8, 0xec04cd73, 0xf448f25c, 0xf8fc06b0, 0x7b0108ae, 0xc257b9b8,
-	0x5f0b9a71, 0xe5fec3d0, 0xdfc65eee, 0xa0dfbe01, 0x78c2cbf8, 0xedc2cb94,
-	0x67460e81, 0x1c787224, 0xb679f9e0, 0x76d0849e, 0x42577e31, 0xc0793396,
-	0xf8f3d3fb, 0x37f73343, 0xf5884d51, 0xcec25cab, 0x5b8ea158, 0x49d771f0,
-	0xf016af11, 0xfca92c5a, 0xc3d9e2e4, 0x183c4fbf, 0x1bfc0e9d, 0x7e05f4a5,
-	0xccd20da7, 0xf3a75e7b, 0xc93650db, 0x9b98a603, 0x04b69392, 0xa45253de,
-	0xfbed2f78, 0x0dd03a64, 0xafc821a9, 0xda957d2d, 0xeb8b2b66, 0xa58c5e60,
-	0x53ea07b5, 0xfd442aef, 0x5993710c, 0x1cb3fdf4, 0xe65669af, 0x08af73c7,
-	0x341c40e6, 0x9eefa0f1, 0x2bfc61d7, 0x4d87e8cc, 0x73636ba5, 0xf82573e2,
-	0xf8a4dcbd, 0x7767e800, 0xf00252ad, 0xc41f7888, 0x0d16670b, 0x3d38e3e7,
-	0x7d2b7792, 0x983976ee, 0x6a40cedf, 0x1f785e00, 0x1fc70eb2, 0xe3079fc1,
-	0x9e0f7c42, 0x32c2d2e7, 0xc0c9fffa, 0xefb8ed96, 0x483e6037, 0xef1bdf6d,
-	0x35adfe80, 0xc78c5e92, 0xd52dd9c6, 0x02beb789, 0xf6783ff4, 0x018796d4,
-	0x7af6dbae, 0xce25ef30, 0x9bfeb91e, 0xb33f3ecc, 0x3f00a2dd, 0x9b72e56c,
-	0x27c88fda, 0x3f6c5dc1, 0x1e476f19, 0x27f7a975, 0xddafe543, 0x05f0648e,
-	0x0b3cb3b7, 0x7c03df21, 0x70d837ff, 0xd7f4013e, 0x13c10dbf, 0x8db20f97,
-	0x8ff483e7, 0xe6f20f9e, 0xe8104b0e, 0x09af7ce1, 0x8f3292fd, 0x45b59d7b,
-	0x7524001f, 0x01cf0e38, 0x72581b79, 0xca1ae7e6, 0x8b0f727f, 0x8f12c923,
-	0x4b4afd33, 0x6bcc5c58, 0x808bff07, 0x774c765b, 0x3e408b7b, 0x713779b2,
-	0xb39351bf, 0x2ef16140, 0x94d43796, 0x7b002e10, 0x87ae55ea, 0x5e2ccc9a,
-	0x87d0e835, 0x26a35d61, 0x185d1fff, 0x93df62d7, 0xd8941a5f, 0x884f56b8,
-	0x0a2775d9, 0x9d3d6135, 0x07d80f67, 0x59ab6eb0, 0x9f286b7c, 0xc7a1bf60,
-	0x5890e2c0, 0x41ccec1e, 0xe22f5939, 0x3f99fb56, 0xa7c79eae, 0xf45acc4e,
-	0x745ca40c, 0xb035ad48, 0xaab0bb3f, 0x0fe8fd12, 0x9f13393c, 0x7ed52bf5,
-	0xa7e045ff, 0x238e1bcf, 0x1d7bff0b, 0xbd99e8f1, 0xd447ec3c, 0x5945fb50,
-	0xbe815729, 0x15f621cc, 0x2095ff20, 0xe9abad5d, 0xc13e83b3, 0x12349768,
-	0xa77239d8, 0xfbeb0ccb, 0xf5068768, 0xe343b054, 0xcf027685, 0x8fccc939,
-	0xf3324d74, 0x0aa5d06b, 0xd9e238c1, 0x0771e3a1, 0xa272dfde, 0x2353c309,
-	0x76a3e7b1, 0x7d3466b9, 0xd0ebfa2d, 0x4fc11ab5, 0xa0d4cd17, 0xde82fbdf,
-	0xc6fd173b, 0x790202ce, 0xd6b61d54, 0x1eac3595, 0x2982e779, 0xebfac3ea,
-	0x12486664, 0x33f209c5, 0xcbe79935, 0x616de1c5, 0x1f1cba97, 0xa90c698f,
-	0x3fc4f5cb, 0xc58f2d21, 0xa7df620f, 0x75f93326, 0xc70e5561, 0xe3f307b7,
-	0x6797fcc4, 0x3269bc30, 0xb33733d9, 0x41d02e6a, 0x7397c42e, 0xabfcc9e0,
-	0x7f082674, 0x092e75ee, 0xde0e23e9, 0x80da300e, 0x3c593abe, 0x3f856ff4,
-	0xe4caee1e, 0xbc1fae14, 0xd65f886e, 0x8f18f5db, 0x493f5cbe, 0x0e5ab25d,
-	0xfebf950d, 0x27db2cfd, 0x9e796a75, 0x50e51d8d, 0xe5cd9d9d, 0x11d9e484,
-	0x6a56f786, 0x3a3cc02f, 0x3f6025b5, 0x8ad5bb4c, 0x6fd968f3, 0xf3703f42,
-	0xd02c81b2, 0x03552de3, 0x89b71005, 0x2b402fc7, 0xdb45f90b, 0xfee8b9d5,
-	0xd884ec03, 0x4b5f3c76, 0xfef5671d, 0xf60cb920, 0xbf762739, 0xb76afa01,
-	0xfd15f509, 0xf00603bf, 0x839cbcb3, 0x3687ccf6, 0x0bb41b7f, 0x9e5bc398,
-	0x85bb01cd, 0xfdcd4dd9, 0x0bb01e86, 0xe2623aeb, 0xd59ff07c, 0x591fb8ea,
-	0x3bff44e9, 0x6fbf56e9, 0xddf714d8, 0x17603888, 0xbd3af3ae, 0x3bf0227f,
-	0x7f983bd5, 0x8351b670, 0x5af50379, 0xb79022cf, 0x7b6a4d67, 0xad8dacfc,
-	0x75a196d7, 0xb5bda0f6, 0xf675cc65, 0xd73ac014, 0xb63f886b, 0x6758669f,
-	0x7c4dbeba, 0x78becf9d, 0xf3ac0175, 0x2eafbbc7, 0xa75e7580, 0xdf02f2eb,
-	0x5bfc39b4, 0x27bf6993, 0x3da1f06f, 0x2f58f225, 0x24f71e97, 0x432bfdab,
-	0xff21ffe5, 0x30fa58ca, 0x5a87043c, 0x4af4ba1f, 0x3a83c806, 0xd5bfe1a3,
-	0xaa37f08b, 0x4068cf1f, 0x3ffec77f, 0x0766ba7f, 0x2d7e81c8, 0xbfa223da,
-	0x0f3fb2fd, 0xeffda1ec, 0x69413db8, 0xb91bfeec, 0x246dd85f, 0x88abf041,
-	0x27b0807d, 0x5bf1e5e3, 0x251f3e7c, 0xbb006f7b, 0x8dfacbe6, 0x633bf81b,
-	0xe76653e8, 0xcc3c936e, 0x7e8bdc6f, 0xf37d96e4, 0x3e27e0ed, 0xe37e621d,
-	0xd18b1796, 0x7a18dc6f, 0x65790c2d, 0xc3b25fa4, 0xdb71a3fe, 0x07c804b1,
-	0xba5cfb10, 0x8c933daf, 0xefdea8f4, 0x489d0e9e, 0x0a01fc80, 0x71e82577,
-	0x07aa2b8b, 0xfba16fba, 0x6c23c83d, 0xa187a391, 0xc11716df, 0x3ed2973c,
-	0xc44ffef5, 0xf4fa3779, 0xf6377728, 0xd790214b, 0x4e7f7a29, 0x9235e806,
-	0x2078c761, 0xc98bb3e7, 0xb294d4de, 0xf7baf8d8, 0xe1e4e4f3, 0x0d81b07c,
-	0x03bf4889, 0x83b5e23a, 0xe360db3c, 0xf9464cf2, 0x8e4dc7f6, 0x630fcb10,
-	0x6218ffed, 0xc8a34276, 0x5849930b, 0x68b5eba6, 0x585df7b6, 0xe1f7906f,
-	0x5b1f7938, 0xbbfb7116, 0x52f51849, 0xca181933, 0x176d8b0f, 0x7887d71f,
-	0xd21faab8, 0x1f80ac5a, 0x07ab4eec, 0xb8f881e0, 0xf6c83eba, 0x961f94eb,
-	0xafd30c96, 0xbf410758, 0x1d0fdc2d, 0x08fe3868, 0x4fa06fd0, 0xd77d83b2,
-	0xdbf461e4, 0x905bf744, 0xefcf1b47, 0x379d57a4, 0x97ff163a, 0xd1f5a8a6,
-	0xe4eff950, 0x453ebd5f, 0xfe62f7cd, 0x343f6fc2, 0xf1897ecf, 0xe2bcdc65,
-	0xfef1a9f7, 0xbccfb176, 0x2738795c, 0x870f2d45, 0x79677fca, 0x2eb43758,
-	0x1d50f2f1, 0xe59bf8cf, 0x5c70ffe1, 0x4f7d99e3, 0x03bec027, 0xa7d878ec,
-	0x63aedcac, 0xfd1413f9, 0xe9e2f1b1, 0xc597ab5a, 0x5ea2b54f, 0xa657871d,
-	0xe33c38f3, 0xd45ed7eb, 0xf335bae2, 0x3ef37138, 0x369a079b, 0x9c631758,
-	0xba7e3e36, 0x0e9eec84, 0x471f154b, 0xce7e026d, 0x753c74bb, 0x8f8b0a75,
-	0x20725852, 0x6f3e216f, 0xa7eb35eb, 0x7598fe49, 0x1ba22aaf, 0xdbe85182,
-	0x33890728, 0x14c6fde6, 0xc6bf5766, 0x7adc8bf3, 0xad608e76, 0xfd85e2cd,
-	0xf2c35b8c, 0xf2e07e9f, 0x18bc826d, 0xfaf1c2a3, 0x4344edf2, 0xae8cf2f1,
-	0xb04ae517, 0x3901ead9, 0xa237fc28, 0x5e3c8bff, 0x3ffad971, 0xfcf7de8e,
-	0x3c7bd30f, 0xf18bf67e, 0xddb8d6fe, 0x151b8a7a, 0xe3a4105f, 0xca5f1023,
-	0x63bf4919, 0x1d1633f5, 0x1df14d1f, 0xfe766149, 0xb857cc14, 0x2963394c,
-	0x3f009e8d, 0x5063d911, 0x7e09afc0, 0xab8fd412, 0xaa3e78d3, 0xe6267ca7,
-	0x2573b369, 0x58ce1ce2, 0x4307e476, 0xc8ecc3eb, 0x9f5cc60f, 0xde47672f,
-	0x087df0ee, 0xd2b27674, 0x1e01e78b, 0x61f851b5, 0x619cf87f, 0xe22e73d4,
-	0xfca5c63c, 0xd1c45f2d, 0x4bff17d5, 0x3a92d472, 0x75f95d96, 0x13cfd1cb,
-	0x763a7fc0, 0xff9e413f, 0x45bc4119, 0x6b6449f7, 0x103b5f8c, 0x197bf961,
-	0xfef15e1c, 0xa1bef83f, 0x999bd521, 0xfc7fdf4a, 0x1248d1ae, 0x652e9ea9,
-	0x67c5b172, 0x4b42b8c5, 0x697fcb2f, 0x8e504659, 0xb4df80b7, 0x3389fc08,
-	0x4f7dd809, 0x2013fd3a, 0xf7d1ee8f, 0x226d41ac, 0x1167dbf8, 0xbdcef3b0,
-	0x9c33cacb, 0x6798c9fe, 0xe3006cb7, 0xceb3dd18, 0xf9561e60, 0x523e9f17,
-	0xa2f08a53, 0x5065c13f, 0x3db9679f, 0xf133c995, 0x6f843d9c, 0x3ff3fa2f,
-	0xdaf9606e, 0x0ed79701, 0x0fe1097e, 0x8c1128b7, 0x61ecb42b, 0x96b95bc6,
-	0x30fc87cd, 0x65a9e903, 0xf831654f, 0xa9af494d, 0xf2ddec18, 0xdf715bdf,
-	0xe983f1f7, 0xcfb12798, 0x7c02afe5, 0x37434ad8, 0x4d9a7d81, 0xf7bb01c7,
-	0x1537dde3, 0xfe42dc03, 0x39bf03ad, 0x4d9d7f1d, 0x462717ed, 0x64bf7796,
-	0x33ee2647, 0x5afeac9b, 0x133aff98, 0x9db82383, 0xfee14f9f, 0x17fe78f2,
-	0xd5aa9f7c, 0xdfa938e0, 0x5c9c6235, 0x3a7585c8, 0x0de637e2, 0x9e1293cb,
-	0xf1701867, 0x99fec73c, 0x97854f2c, 0xbe752ead, 0x37c947e7, 0x253c0094,
-	0x8b57f2a9, 0xe4475967, 0xb2a4940b, 0x5cea9678, 0xb322e5a2, 0x7aed73a7,
-	0x4adb27a4, 0x9454e2c2, 0xbfaec09e, 0x06991a36, 0xbbf2bce7, 0x9e02d7c3,
-	0x20d45ff7, 0x4799e49e, 0x28933e30, 0x56f2f1b1, 0x004e740f, 0xadfd8c7f,
-	0x954960eb, 0xa0157b2e, 0xefa749f4, 0xffe45481, 0xaf1842d6, 0x2c745fea,
-	0x059f72bf, 0x59dd0cfd, 0x795f984d, 0xea833dee, 0x33fc4e7c, 0x3e605648,
-	0x6fdf6e65, 0xdb604e31, 0x279a8d23, 0x15aa44fb, 0x1825a6f9, 0x36398e99,
-	0xce50bad7, 0x1f7efbca, 0xee43bb04, 0x91024194, 0x03579d0e, 0xcb82d3e7,
-	0xc7f5fa09, 0xb035db77, 0x3f3cd95e, 0x7fff7066, 0xbee3f14e, 0x4205c445,
-	0x3749bf2c, 0xc7ec08f0, 0xdf03e5e4, 0xec7ac20c, 0xc05a6871, 0xb68baa7f,
-	0x9f65dfa0, 0xd9acfd05, 0xbe2b797d, 0x2bd9cb41, 0x1b0718ed, 0x6ceee57c,
-	0xf3a7e7cc, 0x3cca3f1c, 0xf9654a1f, 0x8b3ef248, 0xfc99f406, 0xa8c0f104,
-	0x0aa523b2, 0x968a7ee1, 0x07df3f69, 0x8e1e4a7a, 0x0a3f829b, 0xaa4354f4,
-	0xcdd0077f, 0xa5a4b9d0, 0x892e7666, 0x2db5a79f, 0x9c176f7d, 0xfdc2d9f7,
-	0x4ff707b9, 0xbffe859e, 0x7582594e, 0xf960e0b8, 0xb2a42f95, 0xfc48e278,
-	0xd63cc41f, 0x65bf7ddc, 0x02e28d7a, 0x8c7597fa, 0x574ee45e, 0x5f19f80f,
-	0xde63f049, 0x611d75ee, 0xeccdc62d, 0xa35c7f27, 0xd677ecc4, 0xb2d33d33,
-	0xe3cfed93, 0xd29737f7, 0x921ebf2f, 0x0cbf4c33, 0x764eff95, 0xf4e2efcb,
-	0x6fbcdfca, 0x5efdea21, 0xbf12fdbc, 0x8f611bbf, 0x9637f5c7, 0x50f2231d,
-	0x61c786aa, 0xd84db4f6, 0x9e554149, 0x9f95954e, 0xfbaa343b, 0x47649f5f,
-	0x3b79107a, 0x72caed29, 0xfe8fdbc8, 0x4edfa088, 0x3c8915e4, 0xcb1560a2,
-	0x8c6a09f7, 0x4dd12e78, 0x687f30ba, 0x124b091c, 0xf006d7fa, 0xe42a6dfc,
-	0x4fefd111, 0xff62e6a4, 0xa567899b, 0x22a6e516, 0xc826fc01, 0xb802493f,
-	0xc1161b43, 0x7159b778, 0x9fe4133c, 0x033ee124, 0xc7dd39f9, 0x35a756f2,
-	0x3a43b8b0, 0x4e50cfd5, 0x697467cf, 0x3cc7ab9a, 0x22579156, 0x5e044ff2,
-	0xd3be38aa, 0x01ca2c27, 0x54f228b9, 0xe53d99d6, 0x39c11760, 0x1cbf3868,
-	0xbcf3346c, 0x776fd613, 0x4f9e2e63, 0x2979b2fe, 0xf91678f1, 0x7f44fa29,
-	0xe46cbba6, 0x37416739, 0x7089eb31, 0xecc7dc6d, 0x3d06aafc, 0x71b063ce,
-	0x072bfa06, 0xec04351b, 0x037eaa81, 0xf1b8c3a3, 0x93d5ce36, 0x872bf430,
-	0x054f204c, 0xceca5c3d, 0x085beba5, 0x6d83e0fe, 0x524ef33b, 0xd6d43fde,
-	0x9341cf8b, 0x12bdabd4, 0x03cea1cf, 0xb48df5c9, 0x1af95afc, 0x6689b7c8,
-	0x6a849449, 0x96faafd3, 0x60c4f54c, 0x287df472, 0x7be1bedf, 0xba3e3cac,
-	0x9beda245, 0xed623ed3, 0xa9d33681, 0xefff5ed8, 0x57eb41b5, 0x267f7fd0,
-	0x351cf9f1, 0xebf464ee, 0x3f41123c, 0xa57fd712, 0xadba3e4c, 0xdc9fb47a,
-	0x54951f3c, 0x8854fcf3, 0x7b72d0f8, 0xefc6315a, 0x13d944ad, 0x030cfa81,
-	0xe30827b3, 0xccf1f687, 0xf4e46d6f, 0xbf843240, 0xf208206a, 0x81c73dae,
-	0xe7c90fdf, 0xf310863d, 0x8ff1b19b, 0x9e0578be, 0xb679124b, 0x6733d884,
-	0x36f9815f, 0x135af2aa, 0xdb29a73f, 0x7bbce133, 0xc1db8ebb, 0xe6c47cbc,
-	0x04f3885f, 0xddf6a4be, 0x507e1bd1, 0x7674fc04, 0x41f30fef, 0xa7a8ddce,
-	0xe45184fb, 0x933a595a, 0xeb3a836b, 0xb77e894a, 0x016fe6c6, 0x32c77c3a,
-	0x311c3a6f, 0xa9549b9a, 0xc1bc0077, 0xd780b4e7, 0x8e274e64, 0x473e0cd9,
-	0x3c824fb5, 0x1b1376d4, 0x7b2fd937, 0x7f845cf1, 0x851b74b6, 0xf2625dbb,
-	0x88947e9b, 0x92a15576, 0x26c87108, 0xcb55ee7e, 0xcb9688e5, 0x1b6e7f91,
-	0xc1a997c8, 0x13ef4d78, 0x7fe7b05a, 0xbfe2e3cb, 0x9f9f51cd, 0xb83371e8,
-	0x569673c5, 0xcfe802b9, 0x523aaba5, 0xab40e94b, 0xfd7084f7, 0x37186d32,
-	0x772b603e, 0xa5efd00f, 0x42951fec, 0xe67b773e, 0xbe214a8f, 0xdc7a75a7,
-	0x8f7298be, 0x357fd19b, 0x59bc03b4, 0xefc14b5a, 0x97f5b5fb, 0xfa2bfb48,
-	0xf50dfdf2, 0x35706063, 0x7059a319, 0x9359fe6e, 0xffac3b7f, 0x30c7f985,
-	0xfa40fc2e, 0xaf21f7d1, 0xd18ea8e3, 0xe793305d, 0x69ee93e3, 0x0eee9409,
-	0x5e7839e7, 0x1ebf8b0a, 0xa8fcc09e, 0xfcb17e54, 0xe61289d1, 0x66ced621,
-	0x266f62e7, 0xfa018e91, 0x68593a3d, 0x1c8af4fd, 0x796b7fb4, 0x77f4c89e,
-	0x7eb0097c, 0xca8f6fd3, 0xb2c7f720, 0xeb746ee7, 0x3e188194, 0x975149be,
-	0x97542e6f, 0x9751e5bf, 0x97f15dbf, 0x9365b109, 0xe8107bd9, 0xdf8955f5,
-	0xb10d7147, 0xa4ba7f23, 0x935dd820, 0xe7e74a5f, 0xe53e5989, 0xf17ef94f,
-	0xf5820aa5, 0x5b8d3b29, 0xfdcf508d, 0x3f5e5aef, 0xd98c4dd9, 0xea07c44e,
-	0xf3c4a8e9, 0x93185d32, 0xb1ef7b22, 0x6d343f33, 0xecfda7ab, 0x1f20af9d,
-	0xe43558a7, 0xa5ebc09b, 0x04c3b446, 0x289bb45f, 0x963c537d, 0x819a338f,
-	0x9e75dbde, 0xd697d0f5, 0x2f40506c, 0xb1182657, 0xc83fed6f, 0x9b96d7a8,
-	0xcb4ec40c, 0x63371f07, 0x3e265cb9, 0x20a123c8, 0x51e786ce, 0x0ad4279d,
-	0x60eda5f3, 0x160eedbe, 0xeb96d757, 0x7ed3cf51, 0x3e0f5d71, 0x9c1109a1,
-	0xf98ca57f, 0xc1661ca6, 0x7c247477, 0x6be734ff, 0x518486ad, 0x7bb3a58e,
-	0xfed10e39, 0xbf83dfa1, 0xdfa0f6d2, 0x13b950ae, 0x271bcfea, 0xc0a8b9e0,
-	0x592f79d0, 0xda15c003, 0x67e87cb9, 0x3f04f2e7, 0xa542f90b, 0x852bbe5e,
-	0xf8149030, 0x053b050f, 0xfb8204ec, 0xccb71100, 0xd97a8a34, 0x0da6fd0b,
-	0xe0e767b5, 0x56997852, 0x60253585, 0x27f1bca7, 0xe4b1c3a0, 0x931a6145,
-	0xe429e213, 0xc3c316c5, 0x19af6a47, 0xef0a3d6d, 0x9b0cf2c7, 0x84c7ad9d,
-	0xad4be00c, 0xe8064279, 0x478776cd, 0x0b94c5f1, 0xae6a76e9, 0xdb45f013,
-	0x35adf2d1, 0x18e5f2c7, 0xc69854fd, 0xe76d00e4, 0x1ef0a24d, 0xc0192934,
-	0xdb8ca3bf, 0x7cb5c6cc, 0xe9bae3bd, 0x41ddb4b8, 0xb6971d1b, 0x843266db,
-	0x8da30935, 0x78c0a15f, 0xa2971a97, 0x833f911d, 0x93a503af, 0x0ec1f820,
-	0xaf4834da, 0xf2be7833, 0x1e3664c1, 0xffe75429, 0xf8e99be4, 0xcea65f98,
-	0xda51b9f7, 0xfa7a01d4, 0x56c25369, 0x3837cfa0, 0xfcb61cdd, 0x69d83e43,
-	0x382bcc6f, 0x71267284, 0xd1100779, 0xf28bd20c, 0x0bc1c846, 0xa1cac769,
-	0x8de1e54c, 0x0fde7469, 0x079d1ee4, 0x3c721f9d, 0xa5f68f9d, 0x56935bd9,
-	0x417e1236, 0xa06e029f, 0x218be053, 0x5f838d3a, 0xa5b91bd0, 0x37251317,
-	0x9e173b53, 0xa425eec2, 0x2bc5e595, 0xa3f3c399, 0xd8dd3e44, 0x18d1e6ca,
-	0x746fb844, 0xe6f318fc, 0xffe718ee, 0xf735c01e, 0xbef04fca, 0x3f9ee222,
-	0x1477f601, 0xc96979de, 0xc6f07bff, 0xca97f9db, 0xcf8b1f0f, 0xacd2f8c5,
-	0x1e1f989d, 0x7cc56d98, 0x3f3c69f1, 0xc1a0d036, 0x0fdd00b8, 0x85a23ee2,
-	0x97204318, 0x5cbb72a7, 0x45785b9c, 0xe0d6fe62, 0x7d45068b, 0xde7c513f,
-	0xe97982b8, 0xbf2c65c1, 0x6f7ec87c, 0x1f7ed056, 0x9cfc73d2, 0x93317744,
-	0x28f7dded, 0xe689fbea, 0x44fdf513, 0x7121ed0b, 0x32948a6f, 0xdddfbf9c,
-	0xbbfe9043, 0x9f58b96d, 0x88fa65ae, 0xa3e9837c, 0xbaa21cee, 0x399d691f,
-	0x94f31134, 0x46c15e78, 0x6ff83fc8, 0x9a7e0bf2, 0xc2fca926, 0xc9afe543,
-	0xf0e6dc2f, 0x5b3a02ef, 0x92cde458, 0xebd63d28, 0xd2987f99, 0x8108a6eb,
-	0x7cd6c574, 0x44dda7d8, 0xe4d2df5a, 0x02febd21, 0xa53275e9, 0xbd153cd7,
-	0x15fc61ee, 0xe82d2144, 0x0b4e8875, 0xfd00f3e3, 0x6edc60fb, 0x5befef47,
-	0x6fd35f60, 0x683cb0f0, 0x2f19d796, 0x59e0621f, 0x5c783320, 0xf3c22d5a,
-	0x0f13f43a, 0x4df0e5cf, 0x12a69d2c, 0xf1631fc6, 0x824caa4f, 0xfe6192b6,
-	0x6ffd9931, 0x7c43b8c1, 0xcfdb08f4, 0x6b5b808e, 0x739a7a45, 0x057f8b07,
-	0x802ecc2c, 0x1d1a5838, 0x7f1f267f, 0xdaafa74e, 0x4a66ed01, 0xfa610f0c,
-	0x167f850f, 0xdfd99faf, 0xb370798c, 0x63c775aa, 0x2f2120ed, 0x2e6ddc45,
-	0x7dab7f6f, 0xd2f20ea6, 0xe3aad767, 0x64ef735d, 0xb339b6f1, 0x25ccfdd5,
-	0x7cc13fab, 0x03aad24d, 0x53bdcdfc, 0xda49ff5d, 0x026c9c50, 0x710ec9c4,
-	0xe520d03f, 0xd7a3e013, 0xba6f1793, 0x84f9d287, 0x8095149f, 0x9486f0df,
-	0xd04f6dc6, 0x271bb3f2, 0x94f5f961, 0x28ff7eef, 0xc0296fd4, 0xe25c3572,
-	0xe056fb04, 0x8567ca43, 0xc8cc77e5, 0xc27d0049, 0xe087bdfb, 0xdfd9b77b,
-	0x73b6933d, 0x3cc5c94f, 0xd7ee6ad6, 0xeac85c18, 0xc6d2be6f, 0x52ef9552,
-	0x6d5c5fd0, 0x1d35f766, 0x04bb7e29, 0x73abaaf2, 0xd5e4b979, 0x243e5049,
-	0x3af7827d, 0xcab66b9c, 0xe92d0eb0, 0xb93ecfcc, 0xa44f0a50, 0xf276a978,
-	0xbcd99bfe, 0x4b9e4b6a, 0xaea93e07, 0xf64cfd62, 0x41e67654, 0x2c79cd3b,
-	0x26374b9f, 0xbf05fe00, 0x957df0e5, 0x5c7d2bb0, 0x3de4bc4e, 0xfb4491d6,
-	0x0f2519f5, 0x7157d14c, 0x664bdd8c, 0x7d03e765, 0xfc191cde, 0x2cbcd3f4,
-	0xb8cab6ef, 0xe1e40d3c, 0x297d7e2d, 0x2c6ecbcc, 0x1179043e, 0x65951589,
-	0x246da798, 0xfe94beb8, 0x3f03a7c7, 0x5649fd5e, 0x559d1002, 0xbe82ff4d,
-	0xafba0a66, 0xe537d356, 0x65e9c9db, 0x2adf9697, 0xd30d36fa, 0x3ef658f7,
-	0xe102ab85, 0xaf5a86fa, 0xc7138d0d, 0x8ee3f19f, 0x2fe03725, 0xc30efe56,
-	0x987c8bd7, 0x798dd901, 0x825da7c0, 0x38026f4f, 0x9e089af4, 0x3c96ca8f,
-	0x7180f093, 0x7a88c785, 0x055f8e2f, 0x33e0997c, 0x1709192f, 0x6ec2c9fc,
-	0xf02e7f65, 0x7af064a3, 0x38979dfa, 0xe3a2e187, 0x7a0e91df, 0xcf0611fc,
-	0xc995a966, 0x112fbe19, 0x311697fe, 0x7cf53edf, 0x1eeccdcb, 0xcbf83703,
-	0x3c527630, 0xcbee0869, 0x9f310758, 0xb3e7d700, 0x9e9b3e8d, 0x4736edce,
-	0xedcfd23d, 0x283aa354, 0xff74c25e, 0xd41e700f, 0x7ec1f704, 0x62f1216f,
-	0x47d29cfc, 0x6ec63d20, 0xe3c6f012, 0xb90c65a9, 0x789f3f1a, 0x5baf0cfc,
-	0xe29e0d24, 0x7cd0e1fc, 0xf19e732f, 0xaf4b8af6, 0xb93a5bf6, 0xec39d17f,
-	0xfa842c4f, 0xa0f6625a, 0xe123d13f, 0xda96af7e, 0x6ba7201f, 0x71fa086b,
-	0xfa0d569c, 0x321d8513, 0xff5c9f16, 0x6ab7264d, 0xf73f089b, 0x4f17e6c8,
-	0xe064a98f, 0x1ad6787e, 0x800b0d95, 0xaaac1bff, 0x56b50673, 0x4e788f16,
-	0x503211c8, 0xa87f7a06, 0x0fef423c, 0x8a1c8194, 0xf6ae7fbf, 0x3b7bf322,
-	0xacf84a2f, 0x032b1cf5, 0x19acefbd, 0x56790328, 0x14fef767, 0x13dc55d6,
-	0xbdcf8f19, 0x97911ae9, 0x1a745972, 0x0e2247cf, 0x7fe6c47a, 0x3fc63d39,
-	0xa08a5675, 0xcbb5759f, 0xcfe7e7ce, 0xd8767a01, 0xefc12a73, 0xaad8db34,
-	0xd138bb03, 0xce903fe1, 0x5f17e8e4, 0x9a17e6c0, 0x56de3c52, 0x66587fed,
-	0xee1e22c3, 0x81b878e5, 0x9bf3d9eb, 0xa90fb8b4, 0x0d3e16f6, 0x9bc0a0a1,
-	0xbe42123a, 0x147ea2f5, 0xa79dc6f7, 0xda185506, 0x7d436f3f, 0xf557f8bb,
-	0xb09b2718, 0x1894435e, 0x6431397d, 0x327fdd56, 0x5553a779, 0x5d37a2be,
-	0xbecafed5, 0x717d555c, 0xfeaa9278, 0x544b37aa, 0x54c8b2e5, 0xdfabfb55,
-	0xaf9552a9, 0x6aa19819, 0x3df403bf, 0x4e37e3c5, 0xffbd52cf, 0x37f4e368,
-	0x5d7d3e21, 0xefaa3bf4, 0x043f704f, 0x85237a09, 0x040bfe74, 0x53ac5ebd,
-	0x9acd4f7d, 0x7c0e54b0, 0xac16fecf, 0x95f77966, 0xfdb16314, 0xdb52ec2d,
-	0x28903713, 0x84b62be6, 0x40984f24, 0xbeba9dde, 0xf107afb1, 0x0f7ba97a,
-	0x6be6b826, 0xc69754c0, 0x22633b51, 0x0d5c8220, 0xf1638379, 0xbfd6a5fb,
-	0xa97fe480, 0xd5b837f5, 0xd4526feb, 0x54296feb, 0xa3cdbfaf, 0x0ac4ff5e,
-	0xbc3bfaf5, 0xaa4ff5ea, 0xb27faf51, 0xa9febd4f, 0x9febd573, 0xffaf57e6,
-	0xbaf506b8, 0xd7aab667, 0x7aa97b3b, 0x4b82735d, 0x74f1f554, 0xc849e820,
-	0xf795bccf, 0xa453dbaa, 0x42e86268, 0x5f02d9d0, 0x8d63e603, 0x35487aef,
-	0x4c7d3c5e, 0xf48f3c20, 0xe547d22b, 0x727f6e38, 0xa97aa0ba, 0xda325c6a,
-	0x73c03719, 0xff6e04ee, 0x33b746fb, 0xd58afc84, 0xe6fbb1eb, 0x08dae4b1,
-	0xd1f7c57d, 0xd82bea63, 0xf7869b47, 0xefd163d1, 0x59ea84bb, 0xfa357c1c,
-	0x33b0eecf, 0x999a0e38, 0x5429ff3d, 0xd1db435d, 0xde141536, 0x743e6177,
-	0x93cd77fc, 0x1df20fd1, 0x7183abd2, 0x7c1124ef, 0x7c5123ce, 0x755d89fa,
-	0xf10165be, 0x645fb9e9, 0xc9a9e009, 0x7a0e5038, 0xa3fcc2ff, 0xee7c63ef,
-	0xdd65d248, 0xe21c7207, 0x3909e33f, 0x49c9e5c5, 0xf2d10388, 0x27f71339,
-	0x8ae2897a, 0xee29e7c1, 0x269bacf7, 0x5a259ea1, 0xd5b1e633, 0x9ea12edd,
-	0xf60ffbaa, 0xf4c71f6c, 0x52e788da, 0x6e2ed781, 0xa13b301f, 0x62dd0e0f,
-	0xadf890fc, 0xec7a8f68, 0x3fb4deb0, 0x47f98716, 0xdbb17f76, 0x25dce0c8,
-	0x89c2b911, 0xdd7106c7, 0x7ce1fd61, 0xe0c8db9b, 0x4623a5db, 0xe264efc0,
-	0x31f0fb47, 0xd63c8a99, 0xefd624ef, 0x17f05cd1, 0x7e6fcd9a, 0xa9f21aab,
-	0xf472e0e5, 0xa88f7fdf, 0xb677f7fd, 0xffbfe84a, 0x3e9b851e, 0x1b8f76dd,
-	0xef28b2f4, 0x1e21b802, 0xfbe8ed00, 0x04ab7754, 0xadafb1fe, 0xb10f3dbf,
-	0xbfb25f76, 0x83087ea1, 0x3d60fe0b, 0x83367f85, 0xd281b7d2, 0x11efb6cb,
-	0xfbc61ff4, 0xa969c76b, 0x31fc8106, 0xc097bb1d, 0xfb67af2d, 0xbb1ec3e2,
-	0x7444cfca, 0x7a47380e, 0xf20e7b29, 0x9cc54fbe, 0x3474a0d3, 0x1fbafdea,
-	0xa47cb065, 0x44c8b6f6, 0xe39e4b88, 0xdb87d771, 0x56b2c4de, 0x265e60f6,
-	0x88e5f7dc, 0xa2ef5ef9, 0x4e7231f5, 0x63efd2b6, 0xeace8de4, 0x1e6bcbc3,
-	0xbc608b69, 0x25efc753, 0x5ee3347b, 0xbfc63fbb, 0x6e38cef2, 0xc4831927,
-	0x69b8429e, 0x4f4eff4f, 0x5a3f4023, 0x762a7cbb, 0xd3706d1f, 0xeef562fe,
-	0x1b1264c5, 0xf6d9587f, 0x88fdc20e, 0x6743f7e4, 0x36127c86, 0x641b7c51,
-	0xdf4d0338, 0xe511b86f, 0xaf76deaf, 0x1aa1ee07, 0xb7067f0b, 0x7e56217c,
-	0xdf8e387e, 0xe7e5c5cf, 0xc9d16d93, 0xdb7b4e30, 0x5d6f0a80, 0xfdf1176d,
-	0xc452369a, 0x7ac43fea, 0xf4828d4d, 0x42d28a73, 0xf27ae204, 0xc1fc0d80,
-	0x10263ed4, 0x8db9d67f, 0xb8306f18, 0xa2e4bc18, 0x9e63e90b, 0x3e00c19d,
-	0x1f4a4cbf, 0xe1d52fef, 0x4cbefafe, 0xefbfb62b, 0x780fe337, 0x29eadf29,
-	0xc37fb41a, 0x61c7867c, 0xf973d3f8, 0x0fbf6449, 0x5d3e80e4, 0xd38538c6,
-	0xf1d70b3e, 0xf027f6cb, 0xcc1137ae, 0x5a67d647, 0x5cb85ed1, 0x6a19dd38,
-	0x8fe3c7bc, 0xffe509e2, 0xf74f1c7d, 0x93fcc83d, 0xf04fddf7, 0x4a59053c,
-	0xe987caff, 0x87971c6a, 0xcf87c4a9, 0x082a36ae, 0x465eb00d, 0xed409fe2,
-	0x8d8bd211, 0x82a7e04d, 0x80ecaf7a, 0xaa2788d4, 0xb9e1335d, 0x1764e2a6,
-	0x6bdae3b0, 0x13c08b3f, 0x2f801162, 0xc109037b, 0xab98bc55, 0xf877c740,
-	0xd7813959, 0xe565cc27, 0xe89f5e44, 0xef4ce563, 0x0035520b, 0xcb471716,
-	0xca6f3ab4, 0x80bc7907, 0xfcf173b0, 0x84cd8d7e, 0x73ab0bcb, 0xdfd43566,
-	0x8b9cf049, 0xaf09ffa8, 0x5f1eb34f, 0x637a0799, 0x0dfbfab6, 0xd6a90f1c,
-	0x30d35de3, 0x17aea6de, 0xeb64acf1, 0xfbf137f9, 0x53fd7522, 0xf59b7bfc,
-	0xd41a647c, 0x7fc7abe7, 0xac5bd79c, 0xca8def2c, 0x037f767e, 0xd78c7faf,
-	0xc61ea09b, 0x5af5642f, 0x6f09df71, 0x18e1c9d7, 0x431e33e2, 0xbf33260c,
-	0x233696f2, 0xbf3c57f2, 0x73f707dd, 0x9bf30d95, 0xf519297d, 0x32fb86de,
-	0x5049dc98, 0x51debc06, 0x77a8a2e4, 0x37cc65da, 0x48f5bad0, 0x972b064f,
-	0x871f9c27, 0xead489e4, 0xe4c64461, 0x9ae8a5f4, 0x9005f012, 0x0ff4596b,
-	0xfbe33ae8, 0x918fe21a, 0x664de973, 0x83e58fe2, 0x39554e05, 0x5574cee5,
-	0x5cecd77b, 0x74b5bd55, 0xcc9eaa92, 0xdc9f2276, 0x5ccbe9cb, 0x17aaa254,
-	0x6d9065f7, 0xb59d9dbc, 0x554fe5d3, 0xa85f3bb5, 0x9f8d0224, 0xa3dc49ba,
-	0x7c8231e6, 0x9b96d7b8, 0xb3f8fc0a, 0x4e440ab6, 0xf627e53b, 0x1ba7f3b4,
-	0x54fa598c, 0xcb10b978, 0x7e583bcf, 0x879b7b7f, 0x9e087395, 0xab6f6faf,
-	0xca2ef2c1, 0x69fcf09f, 0xdb9f179b, 0xcfa15969, 0x2bfda47f, 0xda1e9fb4,
-	0xa19f943f, 0x3373c3fd, 0x3f9e1fed, 0xfd43fda1, 0x942fda06, 0xc170a69f,
-	0x0fda29f3, 0xed31ffbc, 0xb44fca1f, 0xb6bcb0f9, 0x1f962e6d, 0xf3e3f36f,
-	0x7c06b6b1, 0x8ad6d9df, 0x96db47e5, 0xb6e1f3e2, 0xdbdb3e20, 0x2f7d6256,
-	0xf9e793a7, 0x2be7dc79, 0xf103bdd9, 0x219fdfeb, 0x9d2fbb61, 0x154a539f,
-	0x3f2ab97a, 0xfc033fa7, 0xfceabd02, 0xc21fc054, 0x8c786261, 0x0668e387,
-	0x91270fb3, 0x930b72c8, 0x1f07181f, 0x6159e7df, 0xae35fca1, 0x4e7bad95,
-	0xd3eb145f, 0x4778d81a, 0x5c409db9, 0xce519241, 0xbb439b8e, 0xcaa45273,
-	0xd007f2c2, 0x14dc430f, 0x5aece53f, 0x21e64672, 0x5725c00d, 0x331e3d50,
-	0x397c21af, 0xb7809c18, 0x57fde0d1, 0x696d378e, 0xa75fbb2f, 0x6c0c2ba6,
-	0xe2b6f666, 0xb9c63afd, 0x9f4cb0be, 0xef1f9f2e, 0x717498e9, 0x5224dd3a,
-	0x9bf176f9, 0x8ccfa144, 0x31fef526, 0x6a89417d, 0xb8bda67f, 0xd1572886,
-	0xfbd48b7e, 0xbdfe733c, 0x198cefaa, 0xf5eaa90f, 0xfaaa15ae, 0x1e73bbba,
-	0xc73e0371, 0x6199b8b1, 0x210272f5, 0x4fdd85e4, 0x4ce65c20, 0x92738f36,
-	0x605f7ec2, 0x133dff37, 0xd6797fbe, 0x5c65f1ce, 0x09f2fb8d, 0x482c560e,
-	0x0f406a0c, 0x448bfc7d, 0x9e3b7f94, 0x7e9fa0d1, 0x40690922, 0xe6a64cde,
-	0x015fd424, 0xf16b8c37, 0x942d26aa, 0x85a2898b, 0x8a2455f2, 0x7fba3afb,
-	0xf5d264d1, 0x9ffad16b, 0xd9f2d131, 0x2cb3ff4c, 0xfa8c30bf, 0x67af80ba,
-	0xadc7d881, 0xdcfde397, 0x37f44cc6, 0x7625cfa9, 0x874bfdf0, 0x970df989,
-	0xc153ca3b, 0x46373e0e, 0x7dcda83e, 0x14058de2, 0x63b4b6df, 0x1fef14f8,
-	0x9ea33457, 0x94cbcfd7, 0xf75e5abe, 0xd44faa7a, 0xf307937c, 0xcffa5b38,
-	0x6b76e029, 0xff228fc9, 0x3c84e874, 0x9e411253, 0x893d970d, 0x3b1e6624,
-	0x93c9deda, 0x11fa2151, 0x375f326f, 0x4ff95f31, 0x4bc87695, 0xd179e02c,
-	0xf2d2db3b, 0x7f0fc7ab, 0x5074e3ef, 0xa0352248, 0x348b0b5f, 0xe074109e,
-	0x31fcabb5, 0x2f2efca6, 0x4b930b9c, 0xf2c40788, 0xf785d244, 0xd57fc829,
-	0x7c9a3e62, 0x50a21af0, 0x0d6ad8fb, 0x70d16093, 0x75fb84bf, 0xfce5cfbe,
-	0x9c6af667, 0xec259c8f, 0x74e80f26, 0x1bd599f2, 0xacfc3a01, 0xf4d8c75b,
-	0xd0bebab8, 0x2def504a, 0x1487d42a, 0xebcbee09, 0xe5407bc2, 0xc8c9122d,
-	0xb9a63801, 0xdf7e83e7, 0xb63a416b, 0x9fc72fac, 0xe359b830, 0x0efc40af,
-	0xc2357b28, 0x9aeda2e8, 0x82b7eb27, 0xf001393d, 0xdcbc0562, 0x430d5f91,
-	0x1e2217e7, 0x2f79f217, 0xc8e8f3e4, 0x833fc21c, 0x70bc7887, 0x6ea2ef1f,
-	0xcf528fe1, 0xaad2f1f3, 0xa2bdc36f, 0xff2d11ed, 0x3e352299, 0x5322e957,
-	0x70c34be6, 0x66173851, 0xb8015c82, 0xd80f82af, 0x919f9afc, 0x941cc6c8,
-	0x6f68356b, 0x3f306994, 0x9b2e9e3d, 0x8fdc9932, 0x7dd9d866, 0x4853eee4,
-	0x93e5c3cf, 0xc2482c6f, 0x5bb333fd, 0x8fcb326c, 0x58957af4, 0xe12af7bf,
-	0x72e7e45f, 0xa1de1ccc, 0xb127057b, 0x892b60bc, 0xb4bc87ac, 0x2bf5f6b1,
-	0xdc707332, 0xb53d7de1, 0xa53f205d, 0x5c7988cc, 0xa13e44ab, 0x69995472,
-	0x57384f63, 0xfa74e465, 0xf79d4da8, 0x6fcf9db3, 0x418f5f3b, 0xf27bc8a3,
-	0x9cc716d6, 0xafeba9f3, 0x88963f47, 0xff720ed3, 0x1d59a0e1, 0xa4e46d57,
-	0xaba87830, 0xc1f10cca, 0x6da7162e, 0xdd99bfec, 0xc7efbb6b, 0xed302f78,
-	0xa87a0153, 0x57ebede7, 0x0b58fdaa, 0x5f91fa77, 0xf164fde3, 0x398a317e,
-	0xe31fec3d, 0x335b62fd, 0x43c27ef9, 0x7b0e218a, 0x61de7562, 0x7277ec33,
-	0x1f0f9e08, 0xef017da7, 0x81bba6dd, 0x974fb82e, 0xa3fbb114, 0x54ffd7e2,
-	0xb2f11e96, 0x78efac53, 0x3ba5da2b, 0xd81c98cb, 0x2dfce079, 0x2b3f69e3,
-	0xf9d52473, 0x3a399580, 0x29b7a75c, 0x97b3c37d, 0xeed19a90, 0xa9943b29,
-	0xef726af9, 0xc1eff55a, 0x1c0df734, 0xff2828b6, 0x1fba035e, 0x4279fc3c,
-	0x1451f211, 0x08c4bf7f, 0xc19930c2, 0x76b3e70d, 0x17993e6b, 0x676f0f4b,
-	0x36ff58ca, 0x0d2f8ba7, 0xae1ab557, 0xa56f45b3, 0xfd7060cc, 0xb9c6e40e,
-	0x5894f1f0, 0xb5c0467b, 0x03df8c7b, 0xe2abf0f8, 0x1fad42a9, 0xfa74f062,
-	0x6ed3c3bf, 0xfcf0e8fd, 0xb3f3c395, 0x9b5eec43, 0x515ff591, 0xe1ab759f,
-	0x647cfb3d, 0x0a49880e, 0x7f115fef, 0x182993ee, 0xebf8e613, 0x59f4e52d,
-	0x078fe5ca, 0xc09150cf, 0x1e63577b, 0x924caf66, 0xbe5ca16a, 0x2cf77f00,
-	0x02c3ef93, 0xbf9e3f1a, 0x4619ef21, 0x64d77f95, 0x9ddeba31, 0x878a8d2e,
-	0xcf362cd2, 0xb2ea4703, 0xd8f1bfc1, 0x7202063b, 0xbfcf3361, 0x6bdecc7e,
-	0x05a67b84, 0x425ca11e, 0x747d019f, 0xc7bc2811, 0x2a333f4a, 0xd3c651d6,
-	0xc6d6f1b0, 0x4f188df1, 0x1564a73c, 0x3a557b32, 0x387385a4, 0x0b7daf6b,
-	0x5b5b7fef, 0xfdeca32a, 0x1d5ff8d2, 0x5bf0ff87, 0x7a30b729, 0xe1459299,
-	0x90fe916b, 0x0e5a6df0, 0x2a7fd148, 0xbd157c82, 0xa01fe71f, 0x4691ec78,
-	0x8b2d29e2, 0x9f988bd1, 0xdb80bf98, 0x5c02dd76, 0x06bbdb07, 0xbca51a54,
-	0x8917d0bd, 0xbcc1ff5c, 0x2b5c5f50, 0x654c73b3, 0xdafbae32, 0xee78a98a,
-	0x17cf376c, 0x1fa35e89, 0x164477f5, 0x763dbc70, 0xb811b7f1, 0xafd83947,
-	0x883ffbc3, 0x15bee03c, 0x8dff1fee, 0x5389f78c, 0xfb81aa7a, 0x391c0ecc,
-	0xebfb009f, 0x843a59f9, 0x87973e7b, 0x35b51783, 0xc8ec1e78, 0x0c6d7667,
-	0x6965d7fd, 0x89127db9, 0x35af39c0, 0x8b3cec25, 0xd603db95, 0x001b2723,
-	0x43c56b7e, 0xde862906, 0x10196566, 0x68fa35ae, 0x17f6878a, 0x6125a7d8,
-	0x7bc1ffe6, 0xb3ce8719, 0x5a1e19da, 0xbda10f4a, 0xf767ed60, 0x2965d635,
-	0xb852ce4c, 0xe6f7d2f7, 0xebd99f89, 0x8e94bea1, 0xbdfc3b97, 0xd3d6cecd,
-	0x4beec65c, 0x3fed7b5a, 0xc83ee1db, 0x471df844, 0x79f2efd8, 0x7292b80a,
-	0x48dfbc35, 0xcbf81724, 0x5abe632e, 0x235ef86f, 0x2f82fbd8, 0x62d5cade,
-	0x39f947bb, 0x0a2b4789, 0x4cae7043, 0xdb35b1d0, 0xcc1640ff, 0x0bc5f28f,
-	0x7c44ef68, 0xf63f10d3, 0xdf33c862, 0x32e64525, 0x076f443b, 0x68d42c3e,
-	0xe116fc54, 0x549e26eb, 0x73dda3fd, 0xa15da73f, 0x46423bf7, 0xfe4de702,
-	0x22667178, 0x191da7d8, 0x1af3dec2, 0x259b5f01, 0x8c0e625f, 0xdc5a2ff3,
-	0x72381e0f, 0xedc601bc, 0xbe02f3a0, 0xeb75f87d, 0x3a53b06a, 0x53e45eec,
-	0xd0ecbe31, 0xfd60f5f0, 0xdf7bd6ec, 0xd4647f04, 0x3acdeec1, 0x11867538,
-	0xd3b69fe8, 0xa07f3f40, 0x04f0f7fb, 0xfd1aa7e8, 0xb3ed0b06, 0x8b77c3a6,
-	0xb011ff88, 0x6b75176f, 0x3c83f755, 0xc2c5e5cc, 0x8e12168b, 0xac2c2fd9,
-	0x6b9e0ef8, 0x0131785c, 0xcfcc3fdf, 0xcfcc3fed, 0xf8e2edbd, 0x5f3f9978,
-	0xfb8afacf, 0xde9c4f6f, 0x8eddfe4a, 0xbbf7c63a, 0xa59afd60, 0xfaa83d01,
-	0xc73f5335, 0x687f64f3, 0x21b093b3, 0xf311de06, 0x98e1224c, 0x5dda8771,
-	0x52709134, 0xfa32faec, 0x15af9e1d, 0xe6d0ffeb, 0xdd8e3c46, 0x1e1538ff,
-	0x53cffb87, 0xff6471e1, 0x87ff5805, 0xf44bc2b6, 0xfe8c793f, 0x0ff05473,
-	0xef8f9bf7, 0x7bac1dcf, 0xeef942d6, 0xc6c57860, 0xf7e14b57, 0x7bf80cf7,
-	0xb7afa41b, 0xeeb9cf0a, 0xfa0e7822, 0x7a7ffd81, 0x1f52f21f, 0xc0f7aad8,
-	0xe8ba8318, 0x7a28cf3c, 0x83d89f26, 0x789cef70, 0x87959dbe, 0xdeff1ceb,
-	0x90ec8728, 0x942c6a67, 0x8ce7a0ed, 0x015a1224, 0x235297fb, 0xdf1139ca,
-	0x34fefd12, 0xb392ab53, 0x46a17ee2, 0x68d87f9e, 0x26aff161, 0xac2cffab,
-	0x574d12ff, 0x1f68cfcb, 0xf03b0ba7, 0x0e213b7c, 0xf888d7dc, 0xc5fb0c8e,
-	0xf97d703c, 0x9b0b9c08, 0x0cffe397, 0x1509fbbe, 0xd1ef102b, 0x0fcdb15e,
-	0xf38f79f9, 0xa6e3e47d, 0x2313db88, 0xf2d9753f, 0xba1bb357, 0xecb7e8e2,
-	0x8cc23b77, 0x40d9757e, 0xcfc8dabf, 0x7ce072eb, 0x67bf00e3, 0xb9fb414e,
-	0xde30f4ae, 0xfc275947, 0xf3e32b02, 0x601d3256, 0x54788b4f, 0x8217e402,
-	0xdd86b0dd, 0x616f5853, 0x275ffae5, 0xba17b9e1, 0x8114b21f, 0x65add99c,
-	0x071e22fe, 0x1e61cf3b, 0x02c9ae34, 0x7cf20efc, 0xaffdf397, 0xe7a7bde1,
-	0x3a478e57, 0x0fe5ffa8, 0xddc31ef1, 0x0d9f4ce9, 0x3ea1b3ee, 0xca7837ab,
-	0xddcd5ee1, 0xed6ecce9, 0x2509c395, 0xa3ec7631, 0xa7285519, 0x5e395e3f,
-	0x19271b13, 0xc2e4cd9f, 0x94ffe11a, 0xce70e5a3, 0xf0d2e3ea, 0xdd3ea13f,
-	0x1bdfc263, 0x53fdecd3, 0xbabfde39, 0x63bf80c6, 0xe277b551, 0x5fb0b9ba,
-	0x1f31904c, 0x84d7b35b, 0xc55d9cf0, 0x6f8383ee, 0xef35ee41, 0xcbbf871d,
-	0x62896f56, 0xd9b364de, 0xc1f10053, 0xc0dfbdfa, 0xf1389fdf, 0x902cc4f8,
-	0x9593c783, 0xfb6fbc2c, 0x3a748a71, 0x26fbe3ef, 0x579df7b0, 0xdb6ab9e3,
-	0x347f8b1a, 0x4bd088ff, 0xedcdf7f1, 0xd73e2f4e, 0x6899f807, 0x5e1c80f4,
-	0x675fe438, 0xbfd607f7, 0x24a59d19, 0xf306ffa0, 0xa7edea17, 0xeb1df7f0,
-	0x49dd8fbb, 0x42e93e30, 0xbcfb15fa, 0xb9eb71f8, 0x8faddafe, 0xd5df83ce,
-	0xf8e76fab, 0x59f7bfe7, 0xdfc629af, 0x5ff8149b, 0xf31f7713, 0xc5de38f7,
-	0x1911c4f3, 0x76a4b9ef, 0x8ff81645, 0x2037ec4e, 0x33589dbd, 0x1057ef19,
-	0x5853d5e3, 0x8f4f94ed, 0xb029953b, 0x15b20bbe, 0xb676ff36, 0xe9ef157f,
-	0xbdf811f8, 0x2d3ee8ce, 0xda0dafe6, 0xc71009a3, 0x7944ed14, 0x5afd3e68,
-	0xddb7bdfc, 0xdd7007e9, 0xa0115d29, 0x6d2fcd2b, 0xbf03b7a8, 0xf71bbf64,
-	0x82092971, 0x8ef8349f, 0x077bf701, 0x9ed019f7, 0x9d977c1e, 0xef711fcf,
-	0x059a359f, 0x7e06dcf7, 0xdae50e39, 0x0b746660, 0x784dbfb3, 0x51e0e4cf,
-	0x5e3cd5ff, 0xd1efc69c, 0xefbb034c, 0x18533ec2, 0xc4fa3eec, 0x6c9043b8,
-	0xfdfbe373, 0x882fbc16, 0x24f9d93e, 0x7f1b8f69, 0xf1748937, 0xfdf823ef,
-	0x09fe5903, 0xc81fa720, 0xe15bfda3, 0xeed893fb, 0x4affae42, 0x9211598c,
-	0xc74bc7ce, 0xd9fd337e, 0xccfa5ef8, 0xa80f7ecd, 0xb047d78b, 0x5ff0603e,
-	0xbdf8f38d, 0x328cf48d, 0x5f7aafcf, 0x49d97de4, 0x6e028eb8, 0x23b4678a,
-	0x93d2f1e3, 0x029ff6cd, 0x3974f11f, 0x80979eb4, 0x7832fc0f, 0xb63ec0bf,
-	0xea26ab8e, 0x9ce93c99, 0xde32f68c, 0x27931430, 0x07df7cb8, 0x3a839748,
-	0x97a0d3ef, 0x847547a2, 0x2d48c3dd, 0x5457f003, 0x16f576b0, 0x7010f7e6,
-	0x07e7e19c, 0x1e593b1a, 0x3ee799e1, 0x856f9ac8, 0xa81ff3f3, 0xff0bcfce,
-	0x0124ed21, 0x8f5633fc, 0xc4575092, 0xc22d76ec, 0x6e8f7ec5, 0xdfc14e8d,
-	0x3e3e0c0b, 0x2712fd11, 0xbc5ecaf4, 0x15d57607, 0x6d27a01a, 0x4fbf9731,
-	0xfb8979b0, 0x6d3dc4dd, 0xc81978f1, 0x99b2fa66, 0x3b82eff8, 0x25138ffe,
-	0xf14b0785, 0xff744abe, 0x52cd206b, 0x7e589af6, 0x9185ea3b, 0x2fea42f7,
-	0xff827bf1, 0xb053e5bb, 0x9f806556, 0xd5e80260, 0x7fb676d3, 0x40225bc4,
-	0x3cd96bbf, 0xb803e03b, 0x4ef882ff, 0x5bc45e83, 0x4e1e2825, 0x9e3eac4b,
-	0x1bbc84ce, 0x1ba00f81, 0xa3be17e8, 0x9d9e7f7d, 0x763ff6c3, 0x17943f27,
-	0xaa5e43d4, 0x490157d0, 0x0f7dc0d6, 0x024a1d27, 0xcec9e5d0, 0xc872e73c,
-	0x292871f7, 0xe076f6b1, 0x0e7bc110, 0x73ff3814, 0x922efc35, 0x05f80a77,
-	0xfed53b77, 0x5e787888, 0xfd401ca8, 0xc6985ff3, 0x800053c5, 0x00008000,
-	0x00088b1f, 0x00000000, 0x7db5ff00, 0xd554780b, 0x733effb5, 0x79332666,
-	0x84841e4e, 0xe4249840, 0x09308401, 0x0741410f, 0x68151048, 0x85280978,
-	0x42100793, 0x17b6881e, 0x240cdb5b, 0x41b45a20, 0x768bd151, 0xb4544140,
-	0x03414141, 0x58a50077, 0x56d56351, 0x880dcb6d, 0xa8311fbc, 0xadadff97,
-	0xfb5bf5ff, 0x90ce649c, 0xf9b7b5a8, 0x67d9d83e, 0x7b5ad7bf, 0x3bdaf5ed,
-	0x3f437cdf, 0x756109d7, 0x10f4422b, 0x116dce22, 0xa3109862, 0x42f382dc,
-	0x11c885d8, 0xca8df3fc, 0x5c3adb89, 0x8df88588, 0xdaf9aaaa, 0x2bc89eb5,
-	0x1f5c2deb, 0x774675e3, 0xb5f1bdf1, 0x28f250ff, 0x084c21b3, 0x5d3dfe87,
-	0x1e310f88, 0x90ea7b8d, 0x460ca7dd, 0x09ac2e1a, 0x75ac5442, 0xa51a45fa,
-	0xbacc4e6f, 0x4285e653, 0x5c6cc775, 0xe34ad899, 0xca2a6f96, 0x1fb29112,
-	0xd0aaf341, 0xea9e55e7, 0x0a8752cd, 0xeaa8f6d1, 0xebf684da, 0x6a8f9e55,
-	0xa51eb8f3, 0xdbd627ef, 0x9fa9cb5c, 0x273e7d0a, 0xc5d16b7a, 0x0ab794b9,
-	0xf280bdab, 0x45da2d56, 0x54782efd, 0xb177f62d, 0x81f7aa3e, 0xf80ba0b5,
-	0x3a894d60, 0x1ea8327c, 0xe39469d6, 0x7268f7bf, 0xc2fcd157, 0x63cc77e9,
-	0xd1f7e2a3, 0xd1f44efc, 0xfc7f21e6, 0x82b13093, 0x45daeaf2, 0x2bdceed1,
-	0xa1c27de1, 0x01727b45, 0x031eb95f, 0x18e3a19e, 0x7808bcf0, 0xbabd20c6,
-	0xabf04bc5, 0xa0f5487d, 0x4be6bece, 0x98df80d1, 0xae47453d, 0x61b5f7c1,
-	0xecda8c22, 0xcefe9c3b, 0x8b8f34ad, 0x3d4155ab, 0x193dd28a, 0xdbc68289,
-	0x2e7cf96e, 0x4dbf73e0, 0xd2917acc, 0x47a7b7d2, 0x46fd285b, 0x21f51fa7,
-	0x6a352709, 0xae7cf47a, 0x98b93edf, 0x9edcc7f2, 0x7aa082c4, 0x2ce9d63f,
-	0x6b655f14, 0x718d16ff, 0x78d8d62a, 0x2e5e065d, 0xbf341d62, 0xfe118d8b,
-	0x8b9704e5, 0x5fb8dbbd, 0xbf464f03, 0x4183c015, 0xa56f544f, 0xe38fa5db,
-	0x114717b3, 0xe1b4d35c, 0x64e82e9e, 0x2e3483c1, 0xe51f5bfa, 0xff7de675,
-	0x74780d71, 0x25969be0, 0x8f03fc0c, 0xbc6da44f, 0xde59be97, 0x93d10ab3,
-	0x7d78d0e0, 0xcbdf42aa, 0x850984f6, 0xda532bfa, 0x9c09288e, 0xac14fb77,
-	0x8c3cf17f, 0x9871f657, 0xf7c7e505, 0xf3c79f5e, 0xc12bc10a, 0x7a2bb529,
-	0x96d698bf, 0xdf8209ea, 0x736d3ec5, 0x7d06be79, 0xe79bce74, 0x4c37bb51,
-	0x4c5c5f60, 0x76467c23, 0xf801b1c2, 0x5df5c619, 0x6f6fa676, 0xb1d7e01e,
-	0x7ac8575e, 0xfdeb215d, 0x0b7d3040, 0x29ebc68f, 0x82cc24ff, 0xdc0fe5ef,
-	0x71a6e594, 0x8e3bdf8e, 0xce3c75d7, 0x75fd879b, 0xcffa953c, 0xe59d72bd,
-	0x733ad00f, 0x8d9d65bf, 0xb757c64e, 0x7b6b8ceb, 0x3acb7c42, 0x6874ea37,
-	0xab33f3ac, 0xfa8ada3b, 0x9cb155bb, 0x14fb6a8a, 0xcc8d7fdf, 0xd0d056bb,
-	0x0f4936b5, 0xfc236bb5, 0x6685d7c0, 0x6e7f04db, 0xf1a01f27, 0x583d27be,
-	0x8f8e1e98, 0x023c3f75, 0xea9f75f4, 0x9701b9f2, 0x9cfcef21, 0x57efc7f2,
-	0xb1f9025d, 0x0fc47e12, 0xc70fe02c, 0x73278b53, 0xb5cdaf7e, 0xb4f9fa82,
-	0x047f6ff1, 0x63dc5cfd, 0x5f5e0b73, 0x90b3fdf1, 0xaf82f9a7, 0xc66e5c11,
-	0xebce54b8, 0xd619ef57, 0xe8f17288, 0xbba65760, 0x0214be0b, 0xaa358ae7,
-	0x01d21f69, 0x3ed5e3c1, 0x3ac6e290, 0x8713380c, 0xa83a9acd, 0x4fc81e13,
-	0x9709d41f, 0x9ad0bb5a, 0xfb12fbf8, 0xfc414194, 0x9749f00c, 0x3cff44e7,
-	0xa2d2c7c9, 0xc873f683, 0x8ff942fc, 0xff48cf51, 0xcc57c1d2, 0x705178fc,
-	0x1950e09e, 0xc21c5f92, 0xca42aa37, 0xb7ca43ab, 0xf99cfaf7, 0x13f8e840,
-	0x31bee4d3, 0xc3aa58e0, 0x9145bb71, 0xc53ee47c, 0x2d7e89bf, 0x4bedbab5,
-	0x8e2ffe69, 0x4fd0f311, 0xae385599, 0xced97de5, 0x8ab52beb, 0x7c02b086,
-	0x633d70f7, 0x435fd4dd, 0xc3e51c58, 0x7aa21f25, 0x7941ec13, 0xf31adf83,
-	0xf0934f09, 0x5bc5d230, 0x83c78d9d, 0x14dd59e0, 0xeed7ca6b, 0xee3c6e4a,
-	0xc62fcce8, 0x6ff4c92f, 0x387ead22, 0xaa7f22e0, 0x8c1eb577, 0xb249fa20,
-	0xd469e168, 0xff83c5ef, 0x66eb9d1b, 0x262f0fbc, 0xe9a816fc, 0xf5a61d2f,
-	0x3d56edb6, 0x9befd09b, 0x5f11fcf2, 0x1b787a5f, 0x9bd9af7d, 0x7775ee21,
-	0x8e143fae, 0x8a5d7717, 0x17efa74e, 0x05c3d90e, 0xcda501c9, 0xd1ed63f1,
-	0x84babfbc, 0xbb875bbb, 0x6b05dfd1, 0xa094f46b, 0x6b44177a, 0x7a20d4f4,
-	0xa975dd29, 0xfc31e44e, 0x1f106a7c, 0x8f4f74ff, 0x2f7d2ab1, 0xb1af7dfb,
-	0xe9c74a16, 0x736fdefd, 0xe686b93f, 0xe61ddbed, 0xbef34cd9, 0x0b2ce6f0,
-	0xb3785fda, 0xea7f4f42, 0x4fb3f4e5, 0xb47e3153, 0x31bbd245, 0x293488de,
-	0x8e59954f, 0xfc1a313e, 0x699ed5ff, 0xe59d69f5, 0x2c829665, 0xad9b79e0,
-	0x7de62e6d, 0x95ab1141, 0xc67eceb8, 0xfdb9b9a5, 0x9f27dd85, 0xf4f87f00,
-	0x60053efe, 0x6776172b, 0x7e5469e7, 0x5921e3e1, 0xc2f7ea2e, 0xf01ec97d,
-	0xf7366d85, 0xeede994f, 0xdf60f289, 0x9c61fd1b, 0xf77fe825, 0xa435c355,
-	0x52f9cb1f, 0xe3934f3e, 0xce8294fa, 0xee2da37e, 0xbf028f5f, 0xb3cdbdf8,
-	0x7fa59299, 0x8b19e8cf, 0x773f61f5, 0xd5b28781, 0xe26dc261, 0xde782b27,
-	0x8763c2a5, 0x1172841c, 0xa2e55f44, 0x6fcfbf98, 0x405f7f34, 0x17df027c,
-	0xaf7f37ae, 0x5aab8d10, 0xfc8b7d69, 0xf682efe6, 0xfb112f8f, 0xe269f8da,
-	0xd6f17ef3, 0xf54cc26f, 0x0fe74f84, 0xa5c7e60e, 0xc7c11fb4, 0xfefc579e,
-	0x3defc015, 0x7433af2a, 0xd2d3cb5d, 0x448f1d78, 0x6b6e63fc, 0x598f5e10,
-	0xe0893584, 0x1c2ecc7a, 0x47e80549, 0xbeab9c08, 0xcdfe613d, 0xfedee4d4,
-	0x3296a55f, 0xe0b24bdf, 0x05c3b83c, 0xedfd47ce, 0x7e8a9939, 0x791756ca,
-	0x77e6835b, 0xe47de6d1, 0xdf5790e7, 0xf54d7e23, 0x37f58d8e, 0x1d79a58e,
-	0xd4f557bb, 0x33af3177, 0xe3f99f24, 0x28f71e09, 0xf2843fc2, 0x2d4c9ccf,
-	0xde9cbc21, 0x34b5327c, 0x3115fe98, 0x8d1e982b, 0xebc26694, 0xf489ac82,
-	0xeb05ad18, 0x89d7ad09, 0x0d7cf35f, 0xb1553a78, 0x787a2ba4, 0xe54f7414,
-	0x05577f39, 0x3d9acee4, 0x33e83f36, 0x0f17e362, 0x6cfa0adf, 0xda40b9b6,
-	0x2f547bb5, 0x5bb174e4, 0x1ce267f5, 0xba34fe6b, 0xeecce712, 0x68352e21,
-	0x170e74dd, 0xb0b97ce3, 0x596252eb, 0x1933f72e, 0x9eed44f2, 0xdfa03c87,
-	0x5cf1e6ee, 0xf1affa9a, 0xff99af3f, 0x20fdcf9d, 0x81f046f1, 0xc0b2278d,
-	0x3e0f89df, 0x99fd8697, 0x791db5f5, 0x83875a21, 0x2c7e68fe, 0x7ff45fbf,
-	0xa3a5f2c5, 0xbbfaf559, 0x349ec3c0, 0x07ffc33b, 0xcd026fcf, 0x7e73b12f,
-	0xe03d9f34, 0x6b3cc6cb, 0x9c766ddc, 0xd11d17b3, 0xb4a7e079, 0x89f989a0,
-	0x06e4f9fa, 0x289b2d7f, 0xee16bf88, 0x09c2bf9e, 0xf151a179, 0x6f280f40,
-	0x2adcf956, 0xddfaa0df, 0xecc29784, 0x213bf6bb, 0xe5443e9f, 0x3abc74d4,
-	0xa8b38fea, 0x54fbc2fe, 0xf8dbefce, 0x80da3fd3, 0x11360dd7, 0x47863c06,
-	0x63c7d26f, 0x3e916879, 0x37cd45bf, 0xb7a0569d, 0x013d51ec, 0xe51cdfb4,
-	0xd5b2f7c1, 0xf4c163b6, 0x50bf1f35, 0x2bd7f37f, 0xf81a40fe, 0xc2fcb984,
-	0x27ce9f30, 0x5c6fbe42, 0x027f7535, 0x89eb2b52, 0x72e6fc8b, 0xf34ebcfc,
-	0xdf7fd5a9, 0x17a6b99a, 0x29c173f0, 0xabf60b44, 0x1df595b5, 0x054d6811,
-	0xfeec2f1e, 0xac78152c, 0xb27ff57d, 0xebf81744, 0x51cd4fd8, 0x84222709,
-	0xc6e74b38, 0xfdd01637, 0x5dc5c9a5, 0x8fb17fd4, 0x6d5b17dc, 0x63905ebe,
-	0x8afc6ff7, 0xddc5c1f9, 0x17575f5a, 0x5fb9dbf4, 0x124b4e7d, 0x205380d2,
-	0xbae4da1d, 0xe484fb11, 0x1f417bc1, 0xdd4d569b, 0x6be77944, 0xa2424836,
-	0xf7923336, 0xfcc7f60b, 0x7d8d7ea0, 0x017c15b2, 0x1fc930e9, 0xe523ec5e,
-	0xbcbad584, 0xfb5f75b0, 0xe62ecce4, 0x26cd3ab3, 0x923edbcf, 0x2b4dcc6f,
-	0x9c874f0e, 0x0345f161, 0x75ebc21f, 0x157c1027, 0x97eabe9d, 0x3df0512d,
-	0xda723449, 0xfa71345b, 0x245a10b8, 0x0b8f0bea, 0x4fa21670, 0x7bc7e02c,
-	0x31abd79e, 0x8e89fcdf, 0xd06af03b, 0xf8562f83, 0xeaefd337, 0x63508746,
-	0x46b5ed20, 0xa0d451a3, 0x4beebfa9, 0x540fb6e5, 0x3ed49fd6, 0x2e3d3e06,
-	0xc8cbf7e0, 0xf8c131e9, 0x74b877db, 0xdeabfa02, 0xf52e7a49, 0x4d877e77,
-	0x5957a004, 0x3d50bf69, 0xec2fe1db, 0xcd4be069, 0x5cbc808a, 0xaf7c794b,
-	0xfaf5651d, 0x9792e083, 0x9a91e12e, 0xbb70c59e, 0x9a1ef560, 0x9573fa08,
-	0xdbd721da, 0xc04f970e, 0x2a4b6379, 0xfb5e63b5, 0xa4758f0e, 0x56b16f01,
-	0x9aab37de, 0x5c5b718d, 0xf62a3fe8, 0x436f9e03, 0x534445ae, 0xc28f86bb,
-	0x874c0cfc, 0x3a6143e4, 0x85021b5c, 0xf817770e, 0x14c289f1, 0x77ca8231,
-	0xcf3013a8, 0x1752aef3, 0x958b68f0, 0x9b308776, 0x9af40277, 0x78b8d8b0,
-	0x7a446fcc, 0xabffcf06, 0xcf3c25d8, 0x80bc48af, 0x7af241be, 0xbd0df231,
-	0x7d8655cb, 0x8fbc23e3, 0xfc721d6b, 0x9f2a3da8, 0x43a462a3, 0xbbefdbe7,
-	0xc89c68ca, 0xd024dabe, 0xa89f3183, 0xf00baf61, 0x858b1ce7, 0x3786b3e5,
-	0x2f80d722, 0xd21be518, 0xf819bd25, 0x75609958, 0xae3c7f81, 0x574ae7d3,
-	0x6820a3b1, 0x161eb69d, 0x0ec55e1d, 0xbdbb69c0, 0x97ce10f8, 0x738efa36,
-	0x54d27f73, 0xaa14f407, 0x273f4167, 0x64c768ea, 0x0ee9dfa3, 0x424177c0,
-	0x5bb478e9, 0xc2ac9628, 0x5eb85b7e, 0x3e208115, 0xe39360db, 0x211cb82e,
-	0xc73a4302, 0xe3f8405d, 0xf9a397f6, 0xd653837b, 0xfb92886b, 0x2974cee7,
-	0xd3d4ae2f, 0x83fa7ab5, 0xccc7baf9, 0xfec7cfd7, 0xe4a94b71, 0x53a677ef,
-	0xeb4ad5bf, 0xab268878, 0x80edda92, 0x973a89ef, 0xcd058408, 0xc6758af7,
-	0x38d0408b, 0x3b2ef51d, 0x183e2045, 0x47c66e1f, 0xb9237ae7, 0x125d44fc,
-	0xfefbb1c3, 0xec704c53, 0x04c33fec, 0xcffb2bc7, 0x7513f2e2, 0xffd1df39,
-	0x4ffa6ec0, 0xb3bfcd33, 0x5dfc7edf, 0x82fad2ec, 0x22eddcbf, 0xd374c07e,
-	0xbb2676ca, 0x7606fda2, 0x9871f12f, 0x95f7dc80, 0x0576cb53, 0xe96d87f1,
-	0x0b9f5d76, 0xfadf80a4, 0x6b4e3ac4, 0x8f1a5d77, 0x0be26ef6, 0xcbd0e76c,
-	0xcf1b456b, 0xfa02fc13, 0xbab648bd, 0x96977cb9, 0x98c8bd0d, 0xf33c8747,
-	0x859f48bb, 0x9ed841f6, 0x1f6347bf, 0x4db6b45f, 0xa9aa7d86, 0xde088d59,
-	0xfdf407d7, 0x17cfb631, 0xd5d7b079, 0xbdf11da0, 0x9c5dee9f, 0x84d4f80d,
-	0xde61e5b5, 0x2dfef7fb, 0x57c8e70f, 0xc5f7167b, 0x9f54adf7, 0x5b7b0fe5,
-	0xbfa8278d, 0xb3e5c27e, 0x9b4ce88c, 0xfa1ffdf5, 0xfa9eeb7d, 0x36c7985e,
-	0x2e483dd8, 0x56f659ac, 0xb078f1c6, 0xe083ef21, 0x16f8825f, 0xa6bb43eb,
-	0xdf2063a9, 0x0f32487d, 0x96ee87e5, 0x3ed0c372, 0x83496fc2, 0x2ce1f7dc,
-	0x619a89f0, 0xe1541776, 0x9616fcf0, 0x3987c3b7, 0x9f9f385c, 0xebc193ed,
-	0xc84e43b3, 0x78a2fb40, 0xf154e7a6, 0x1b6dc9af, 0xe04ff642, 0x68db350f,
-	0x75b56abc, 0xf78538f2, 0xa9f031d1, 0x78bfb79a, 0x135fd747, 0x8c5a9f81,
-	0x5f78f04b, 0x432127ef, 0x9a7a893b, 0xabbef5a3, 0x9b8cdea8, 0x1fa15393,
-	0x99fae895, 0x19404898, 0x1068fcc9, 0x9e5720ec, 0x7a0f52db, 0xc034d14d,
-	0xf0ec97c1, 0x981afce0, 0x71c91c22, 0xf4fed0d8, 0x57ee34a9, 0x2ec316e9,
-	0x03de60aa, 0xdf3d35f4, 0x2c6969ab, 0x38fe939f, 0x3b3fd1d0, 0xfbc325ae,
-	0xa30bf077, 0xdf3787fe, 0xe2eb483a, 0x79e430dc, 0x36e9bdbb, 0x3aadb3cc,
-	0x9847f592, 0xc9eed0f3, 0x2a02c39b, 0xc8b68aec, 0x3fe7d0d5, 0xb07b988a,
-	0xfee3c107, 0x83222d28, 0x799acdda, 0x95e42ac3, 0xa5eef1fd, 0xd692e7a0,
-	0xd3e7c0e1, 0x83262d4e, 0x6872afc6, 0x8969137d, 0xd968fbe7, 0x8be43831,
-	0x449e25e3, 0x2ee2a0f1, 0x53e72fe7, 0x0ff1c8a2, 0xe8496947, 0xf2d2c4a7,
-	0x66f855c4, 0x837b616d, 0xfdc1e868, 0x8a8bb79c, 0x037fe4ae, 0x75f4470e,
-	0x6b89b3ec, 0xf6fad32f, 0xd4f18dad, 0xefcb7cd3, 0x96b7399e, 0xe296f9d2,
-	0x9a6a80c4, 0x55d61677, 0x9be92be5, 0x79f3f24c, 0x65ef3e9b, 0xaeadbcfa,
-	0x1cfde0ac, 0x437aef3a, 0xc285f95e, 0x50ff20fa, 0xac5f15fe, 0x87ca5eff,
-	0x307d2e59, 0x20d6e70d, 0x3649db0b, 0x22ded384, 0x7d5df23d, 0xbed38f9e,
-	0xf7f1c473, 0x149ef8d5, 0x3d27db2e, 0x7ec3f16c, 0x37763c50, 0x9ac9e9e3,
-	0x634a8f48, 0x1db70895, 0xf0995072, 0xd9fc5cb2, 0x69edbf98, 0x661575a5,
-	0x6e01d768, 0xa92de2f3, 0xb43cf01f, 0x6f205381, 0xf8eb928d, 0xd7937916,
-	0x6cb85531, 0x3589942c, 0x531fc816, 0xf329725d, 0xa63fb915, 0xe30daf09,
-	0xd71a10cd, 0xbb05c3fb, 0x1fc4fa17, 0xbcd10ba0, 0x7f1f0a67, 0x9cfc2d9f,
-	0x5c022ade, 0x95a2c7ff, 0x89bc06f3, 0x4825e63e, 0x53d938fa, 0x8cdff865,
-	0x9117bf79, 0xad1967d7, 0xd923ca63, 0xad5fac99, 0xf9f0c1eb, 0xd14f79ae,
-	0xeff686e9, 0xfd83f43c, 0x99fa9d3b, 0xfec8637a, 0xe061ec2d, 0xf6dbf333,
-	0x877b4b51, 0x4c9914fe, 0x475eb870, 0xc5def5e9, 0xa9153fac, 0xf847c291,
-	0xfaa51969, 0xf21c7721, 0xa0484f2e, 0xb9fddc75, 0xb77e83d4, 0x843dbc5c,
-	0x46377fca, 0xd2dcf515, 0x64d4f2cb, 0xbdc99fbd, 0x9d869fc7, 0x2408b0f5,
-	0x17b9a50c, 0x8f5ed65d, 0x564ef9a1, 0x52c435b7, 0xa4de84f9, 0xbdf104c7,
-	0x5bb6121b, 0xd8ddd7a1, 0x627dfccf, 0x99df59ae, 0xc0551a24, 0x7350f279,
-	0x0f807dbd, 0x0c8ad7d1, 0x0188b7a9, 0xdfee8062, 0x47fbb963, 0x13ed1f7a,
-	0x0be1d92f, 0xbb433579, 0x3a5c7007, 0x18b9b3e9, 0x7ae55857, 0xd951de6a,
-	0xe48c779e, 0xdf9d2f2c, 0x84e8ebc7, 0x08f29308, 0x6e48a7f2, 0xcea67a40,
-	0x3a39e9cd, 0xa17e51e7, 0x67eb23ce, 0x7d803f14, 0x73faba56, 0xb772f02b,
-	0x6ef9c253, 0x761faa67, 0xc6a68ab5, 0xe55e98f1, 0x4883a6ae, 0xe3c503cb,
-	0x382ecc71, 0xd220e4b4, 0xb6f43bbb, 0x5fdd0e25, 0x5dbff3c0, 0xa3dbd3a7,
-	0x8834dea6, 0xbbedc9f6, 0xf6ebdfa5, 0x4da7533e, 0xc6de404a, 0xa8e8eef9,
-	0x3422b2fa, 0xa8cf22da, 0xb758cdde, 0xc1e8f9b7, 0xc9e75a78, 0xff3c11ba,
-	0x9e5e75d3, 0x09bad9ff, 0xa33dfe9c, 0x27ae39f8, 0x6c79673e, 0xd6a3b6d2,
-	0xe45faa14, 0xb7d8bc55, 0xdf857ad7, 0xdeb1744f, 0xf581cf26, 0x1f600e74,
-	0xf534198f, 0xe9303bf1, 0xda276d0c, 0x5171b8cf, 0x3c99c611, 0x7a8ac4a2,
-	0x2216bf33, 0x4e93ad3e, 0x8dee8bbf, 0xf8eb57f5, 0x6157bf3b, 0x1bdf9e78,
-	0xdf6cf0cb, 0xf9031191, 0x8ccee960, 0x6f89489e, 0x046f7a1a, 0xd97ed7e0,
-	0xff6df3c2, 0x8ef59c28, 0x774bf6d0, 0x7a89ec0e, 0x22df0967, 0xfb3cde48,
-	0x83b87ffc, 0x71b395cf, 0x027d5f4d, 0xc957f6fe, 0x39b248df, 0x5ff818f1,
-	0xd01e5eef, 0xce5d05cb, 0x02233d26, 0x6e8d5fe7, 0x427f0457, 0xb4b86cfe,
-	0x217f0ee7, 0x17f62c65, 0x9c1373c6, 0xb9191cc3, 0x7f7087c7, 0xfd467e47,
-	0x9258fcbd, 0xb9effa07, 0x63a48fed, 0xf34dadfc, 0xfa8c793f, 0xf8b7ef3f,
-	0x9d4e746c, 0x5e174d17, 0x2a7e1f05, 0x777bed92, 0x9c2f342b, 0x717b9bc3,
-	0x86b1473e, 0x2c39c32f, 0x73cfbcfc, 0x1975b714, 0x17aaadf1, 0x7a05ed1f,
-	0x30608d7c, 0x5b5fca82, 0xed7cc11b, 0xc8e79b35, 0xb8f7f432, 0xfbe9efec,
-	0x0bb63cef, 0x05d57de9, 0x65fa5277, 0xa1e31c46, 0x034581fc, 0x79ce9ed0,
-	0x3dfd4c91, 0x80128af7, 0xbad06abf, 0x69922b7d, 0x1c37837e, 0x34a2f4b5,
-	0x1ea529ff, 0x373ec0e9, 0xf9fd821e, 0x6e6e196f, 0x9a5b643f, 0xd96d829a,
-	0x75c9ffcb, 0xe59bfe7c, 0x9f75dc82, 0x3a25ed8f, 0x4a0183e5, 0x348d99d3,
-	0x8fd4b0d7, 0x6386340a, 0x6767af23, 0x6ff7b4f3, 0x49075815, 0x8977981e,
-	0x91e7c3dd, 0x7811b7df, 0x78e5af3e, 0xf62bbf58, 0x3b7a0a3d, 0x707a25af,
-	0xfa4cbd3e, 0x7fa8d5fc, 0x7cebcac4, 0xa2f7a9e5, 0x2189df61, 0xbf09d93d,
-	0x78db7e48, 0xe3eeafd4, 0xf587f016, 0x09fae279, 0x8ecd4f80, 0x9fb91b9d,
-	0xfa07872a, 0x4bcec56e, 0x2f205307, 0x993c20de, 0x321dc7a0, 0xaf42abff,
-	0x56a5a547, 0xe652fc6c, 0x5f398a5b, 0xfc27da4c, 0xca4ca2fe, 0xe7e88f49,
-	0x63cd68a0, 0xee24c97e, 0xafd7c4ee, 0xebe518a8, 0xb0c97cd3, 0x27e71b6f,
-	0xfda97b9d, 0xb2ec65b0, 0x5bd8cb7d, 0xdf2e1953, 0xebb3dcf3, 0xdfd197e7,
-	0x73e17623, 0xdf303f52, 0xc1be9ec0, 0xcdebcf2e, 0x2f4067c4, 0xe34d79c6,
-	0xed93f5e6, 0x29afe0bd, 0x076832aa, 0x91e523c1, 0xbe379630, 0x62b3f8ef,
-	0x6df9f156, 0xe1b55bc8, 0xd9f22f92, 0x885fed41, 0x37eeaed2, 0x7932760c,
-	0x3bab0bde, 0xe3c8f217, 0xfa6bde51, 0x96d5bcb1, 0x39d0358a, 0x53e61d7a,
-	0x95fc92a3, 0x457f2411, 0x73af7dc6, 0x2de51034, 0x5beffb42, 0xcd046c7f,
-	0xf1290633, 0x86a468ef, 0x485a45de, 0x7d39fc97, 0xf3f8135b, 0x3f926143,
-	0xbe610d47, 0x7433ac64, 0x07c4039c, 0x6f3be234, 0x11a339d0, 0x3917183f,
-	0x7d78cac6, 0x907552dd, 0x3922e5ce, 0x1ada0802, 0xdef3943b, 0x61638228,
-	0x2eb42aa4, 0x252347f4, 0x3ac7cdbc, 0x984427c7, 0xc42515ea, 0xbf8fb1da,
-	0x1d55faef, 0x3cb86a4f, 0x8370d4bf, 0x7413babf, 0xfac87dbf, 0x776f7ae5,
-	0x3abe630e, 0xeb7ef956, 0xdf15b22e, 0x8b8f3c09, 0x7373e7cc, 0x2394e45c,
-	0xd475e09a, 0x7ae87be1, 0x1c25d743, 0xfa8e4fdf, 0x167c2289, 0xedcfc7ec,
-	0xb66b776c, 0x5bf73eb5, 0xa2f36b82, 0x47ec0f5c, 0x70bed32f, 0xb54e9f80,
-	0x0cdb9cb3, 0x37ea92d9, 0x5c7170f7, 0xdfba6bcb, 0x6f5b37dc, 0xbe7c14ef,
-	0xc5eecf34, 0x615ef47e, 0x48ec1034, 0xd26fd2f5, 0x16f25b6c, 0xe5e6ebce,
-	0x819a1e29, 0x69efc150, 0x97e47ccb, 0x095ebcfc, 0x817f0adc, 0x40bb73ef,
-	0xfeb175fd, 0x5f94e9d5, 0x9e0c8bf7, 0x8fa447cf, 0x8abc62d7, 0xeb5be670,
-	0x71c9bd62, 0xff979f04, 0xb279f2a1, 0x91f29f2e, 0x6ed9d7cc, 0x378a6eb3,
-	0x04ad7e19, 0x36eb6f1d, 0xb05ef2ca, 0x4d3ca293, 0x26c4ffb6, 0xd7a2dfeb,
-	0xfbf1d04b, 0xb4a74eb1, 0x683f99ff, 0xa0ac2393, 0x95fb77ff, 0x46fbc6be,
-	0x17e19378, 0x933cac7a, 0x54b7986d, 0xf4c690de, 0x66d3dba4, 0xe8dcfce9,
-	0xc31c0d17, 0x9fcb4f21, 0x3b37f3d9, 0x2a33df41, 0x1f21479c, 0x22b1547e,
-	0x0cfd7a0a, 0x21840d4d, 0x917a6abe, 0x4bae43b7, 0x395eb8c7, 0x1fa1b96e,
-	0xdf00ca06, 0x710e6dbd, 0x81ffcb2f, 0x96fac121, 0xfa45e781, 0x1a6eadbe,
-	0x7eb060f3, 0xfe27695d, 0x72e51833, 0x6a45573f, 0xd57d07bf, 0xc1e1baee,
-	0x54fbbd60, 0xbc7943f9, 0xcf71f4ef, 0x3c1f79d5, 0x6f39099e, 0xb8c6a702,
-	0xf011fa1d, 0xd5f6fd49, 0xefda73cf, 0xdaf00b3e, 0x92fa94e4, 0x85e3edb5,
-	0x359faf94, 0x09f7cf80, 0xd85e1d53, 0x8477daf5, 0xadaf61f9, 0xc5ee159f,
-	0x44f7eaba, 0x985761f9, 0xd21befa7, 0x6fbbf8bb, 0xade98dbb, 0x667feeca,
-	0xdaabb50b, 0x89e99fdb, 0x96ed95e8, 0x642357be, 0x6d37b479, 0xf79450e5,
-	0xcd79fa64, 0xf2e18ee6, 0xe5c15537, 0x58ac81e1, 0x539b7782, 0x1375853b,
-	0xbcfdb2bd, 0x1fbf2eca, 0xfa12e9d1, 0x96fffb25, 0x42bf7144, 0x8f3f6bcf,
-	0x584f7d67, 0x91f3c9bd, 0xaf207dbf, 0x7dcbb347, 0x7ea46a21, 0xe725c478,
-	0x9e39a475, 0x8f4185f7, 0xdcb78a47, 0xef809593, 0xfcd2af24, 0x0d4cb2fe,
-	0xd06e1fc0, 0xf2f5329f, 0xbb5157db, 0xd9555f4f, 0xd7e7336f, 0xfbe30f8b,
-	0x13d5159c, 0x6bbcad39, 0xf5cb9f32, 0xa2eea71f, 0xa7a984f2, 0xe06bbfd8,
-	0xd9954e7f, 0xe9989a9f, 0xdf813355, 0x83f6ff5c, 0xd9e1ff54, 0xaf001627,
-	0x473533c3, 0xf6dbec26, 0x4cff97d6, 0xfe5d6df3, 0x36a3d627, 0xf8116b44,
-	0xd3f7717e, 0xc566bf5c, 0x7e802cff, 0x74956350, 0xb5db9c63, 0x91bf3d3a,
-	0xffa2c5a9, 0x63bf15aa, 0xb722223d, 0xbbd7f245, 0x3a3f1fbe, 0x65f9bcd3,
-	0x0e2dda85, 0x54e1ae6f, 0xfce1e7f5, 0xa204ab3b, 0x2b860c95, 0x5ce775eb,
-	0x47e06881, 0x72b948b3, 0xbf10d6f1, 0xa8925031, 0xdda88bdb, 0x8f5526e2,
-	0x41dbf457, 0x17f5a1a7, 0xf7ae77d3, 0x8a57bf3d, 0x763df926, 0x30d7fdd7,
-	0xfe0045fe, 0x64cf33ae, 0x9c3d026e, 0x5674f9df, 0x34369fb0, 0x72be72bd,
-	0x7df4e7fd, 0xd8be8e73, 0xc2db6f40, 0x0b85f64c, 0xf4eb24cf, 0xc2e9e926,
-	0xe7ecd933, 0xd9f7d44e, 0x0967c505, 0x085fbb47, 0x9e10678e, 0x971ce1a6,
-	0x0e1a6de3, 0x9d61fbb9, 0x6f8e2e2f, 0x67be0e1a, 0x68e141f0, 0x41bb63ca,
-	0xf41e534e, 0x8a7f8364, 0xfe2ca6e2, 0x42ca6fee, 0xd22d97fb, 0xa7cc630e,
-	0x8e14b9f2, 0xf0b5a27b, 0x6e7caefe, 0x8de426e0, 0x929dea71, 0x253bd4ef,
-	0xb75d097f, 0xe8ed2996, 0x1ee64fa4, 0x3ea4b3a7, 0x5c82f496, 0xde6593e4,
-	0x370bf329, 0x6fe1d894, 0xbcc9b7af, 0xfd897d6b, 0x35f7e618, 0x4fc4b569,
-	0xc5bf7473, 0xdda97f02, 0xfafefb0b, 0x3f1ce1e5, 0xcf3edb31, 0x7af6694b,
-	0x035c69bb, 0xe6fdfd0f, 0xf9f48bef, 0x0b890df4, 0xedb6a5ea, 0xf639c30b,
-	0x8e32e8a4, 0xb4a64960, 0x6cfb3ee3, 0xaa917c47, 0x6dc2dbeb, 0xea5ba1d0,
-	0x8fd78c1b, 0xef5e06ed, 0x2ff9a148, 0x5ea5e3d6, 0xfab848b6, 0xe37c959e,
-	0x052d7ce5, 0xc005d5e7, 0x2c5ce71d, 0xef2173e5, 0x7919bc49, 0xf0a15f03,
-	0x82f1f15d, 0x9f95d814, 0xc7f694c8, 0x8f2c7c50, 0xe513de1a, 0xd4cf5c06,
-	0xdc00ca1d, 0xa89d758d, 0x68e97af3, 0xafbfb4eb, 0x8c6877cf, 0x30477c8f,
-	0x1d6fd77d, 0x20248872, 0xd5ab6e71, 0x5bd42583, 0xbf43f7fd, 0x36aadfa8,
-	0x3b9704f9, 0x91739780, 0xbd41dffb, 0x0b621b05, 0xed180fa0, 0xf22fae17,
-	0x7bcd0796, 0x5e3356e0, 0xf3993506, 0xf3997783, 0x0d06715b, 0xe5dbe7fb,
-	0x21f9cc07, 0x93f9cc87, 0x3371dc1f, 0xea854fb6, 0xbe855fbb, 0x87f1e7f3,
-	0x7a9f4e70, 0xe06895f9, 0xcb5ff16b, 0x0b8f420f, 0x3c21678d, 0x7c73d02a,
-	0x97a6145b, 0xba5ae22b, 0xdc4643e1, 0x30627606, 0xdf0a54dd, 0x95da6b41,
-	0xa68acff5, 0x6744bd9b, 0xcfdecb55, 0xecb37a90, 0x5ad36477, 0xd0cee43b,
-	0x3be3bb71, 0xc6ebd222, 0x21192a3e, 0x365eaecb, 0xfe8a7c4e, 0x1e37bcd6,
-	0x2bf258f4, 0x929be585, 0x075fb297, 0x3edd1cdd, 0x6f4e46fb, 0x30f0c09e,
-	0x9b0b92ec, 0xe5144095, 0x8744235d, 0x8bf11f7f, 0xf1210da5, 0xe2426b9f,
-	0xcb99d682, 0xf7daee17, 0x504710ff, 0xe38278e1, 0x678cae2e, 0x5e801ff4,
-	0xb04a7959, 0xa9f2aa7d, 0xe5ccc26f, 0xf5f35d72, 0xade71875, 0xf1cb5df0,
-	0xaacb577b, 0xa3fe38e2, 0x4ba8e973, 0xcb73853b, 0x5eaf7738, 0xf29551b7,
-	0xfd84b7bc, 0x8e7691c8, 0x8876ac8b, 0xebcd0440, 0xebdd9450, 0xd697efa2,
-	0xb2bcb147, 0xe85ce480, 0x270a948b, 0x627a4dc7, 0xbbc4eed0, 0xd565cb2a,
-	0xd51e12f1, 0xb0fc51bf, 0xa8c3571d, 0x3293fc8b, 0xd80448bf, 0xf23a0bbe,
-	0xf803ad06, 0x468bce0b, 0x59565fa9, 0x9f00fb03, 0xab68738e, 0xad155eb9,
-	0xc838a3f3, 0x35efe67b, 0xd7eb8da2, 0x2c26faee, 0x3d907bf8, 0x435ef59a,
-	0xf97556ff, 0x3865fd4a, 0x20744fcb, 0x6cbe8384, 0xeebedcba, 0x6823921e,
-	0x7b0d2b7d, 0xdf295af8, 0x9e51b2dd, 0x679f2463, 0xd6eb4e01, 0xef867c92,
-	0xce206fa4, 0xf70a2c44, 0xea5ef94b, 0x6766eb0b, 0xf2f45cb1, 0x400a5e3f,
-	0x487b691f, 0xbad2bb61, 0xbaefd97c, 0x3973fafb, 0xe3c2a7f8, 0xb61cb184,
-	0xde518a6e, 0x4f91f587, 0xc864c530, 0x1ef7faf9, 0x4bdefe6e, 0x3ec166f5,
-	0xb2741e22, 0xfb90c47d, 0x2ebeb90d, 0x1ac9cb56, 0x75feb9d6, 0xf0516db1,
-	0xf88a89bb, 0x6cb725ef, 0x36e3cfd6, 0x2afc3f5a, 0x83e295c7, 0xf5198ff0,
-	0x73c96646, 0xef58f865, 0xfb1ebd16, 0x532dca5f, 0xe68ebdee, 0xc5b0fe55,
-	0x81a17b0d, 0x66f5e107, 0xd7c70e01, 0x77400b3a, 0x7b4ac7c3, 0xc97c91d9,
-	0x0a8623e7, 0xab1a378e, 0xcb363bf7, 0xc2934a62, 0x9fa91e89, 0x1ed245e3,
-	0x98b4351f, 0x132496ed, 0x6e2aebcc, 0x4fdeb265, 0xf7f8bdb9, 0x4f98bba3,
-	0x4a145d07, 0x6df8fbf9, 0x2f3926ca, 0x0e27c72f, 0xf6c9c07f, 0x39fae3ce,
-	0xe881e064, 0x0fcb1868, 0x0d8b5f3a, 0xa0b59ba1, 0xa0879c07, 0x6e982507,
-	0x8b7174cc, 0xee2be122, 0xbaf7f293, 0xe8379958, 0xf13ff482, 0x229ba0bf,
-	0x4eeff0c1, 0xdbd6340f, 0x74481e9d, 0xd07408b0, 0x0e842f51, 0xec3fd584,
-	0xa542fcdb, 0x2b876223, 0xab148284, 0x17ce21f0, 0xebc32467, 0xb11fab1e,
-	0x12adbd78, 0x92ac7d2f, 0xf1b4e8ee, 0x7d701785, 0x4b7de22f, 0xbc285c1e,
-	0x4524bf54, 0x1fad7db0, 0x713155c9, 0x45204edc, 0xbb0a8e58, 0x5f68a513,
-	0x2ffb2312, 0xfe3829e9, 0x5af3fa8e, 0x36e674e2, 0xc15efe1c, 0x47da0572,
-	0x9f7b7017, 0x5af7b645, 0x219bed29, 0x95b698f5, 0x5cbf1c61, 0x2c9f7772,
-	0xb1c4c9d0, 0xa2393a66, 0xde9195d3, 0x8dd6ed94, 0xf0249e75, 0xfe86d283,
-	0x3bd4de7c, 0x0277ab8b, 0xb047cf9f, 0xeab259fc, 0x618693c7, 0x7bc42f7e,
-	0x9333c280, 0xa83fb3b7, 0x4ff661b4, 0xb4be843e, 0x2bdfc9d5, 0x59f5b5b2,
-	0xf715ff90, 0xa1f49ddc, 0x7b01c674, 0x9ad7b512, 0x957f9ca6, 0xedbec9d2,
-	0x989e40ef, 0xfae55d3c, 0x3fb48593, 0xce39068b, 0xd6e7df24, 0xd26fea24,
-	0x69c38528, 0xa95d3a8e, 0xa40fc1b7, 0x2ca9f7e3, 0xe47f9745, 0x5592813d,
-	0x73d2b27d, 0xc9213fe1, 0xfd390bb8, 0x18fea353, 0xa5e40365, 0xfee4e3be,
-	0x1fa3ea33, 0x4b3a7bf4, 0xd5bf55ca, 0x09e462e1, 0x7cbf5cae, 0x8cd1d875,
-	0x40b6a468, 0xfde9a536, 0x7584bec7, 0xe3174c4e, 0x77ee03d7, 0xcf1362aa,
-	0xf984adb7, 0x1b965442, 0x4291abf4, 0xd6e3facd, 0x8f27ccfe, 0x7a3b698e,
-	0x6e8fe537, 0x8ced241e, 0xbe617dba, 0x707cb04b, 0x77e48c74, 0x98239b6d,
-	0x5ab88ffe, 0x3da4e2a3, 0x650ded8e, 0xb67c493a, 0xf87efeac, 0xed22cbb9,
-	0xcc7e7147, 0xc71a687f, 0x53ad9427, 0x07b86103, 0x6f6cc6b0, 0xded48aa8,
-	0xb5087ec6, 0x07da841b, 0xa3a03340, 0xd30a35f2, 0x8f7adf61, 0x9cf9993d,
-	0xcafac2e2, 0x70fd0323, 0x9c7b940e, 0x857cc71c, 0x826be0fd, 0xb9d870fb,
-	0xb5890705, 0x009f6b67, 0x258d254e, 0xe446efac, 0xfabfcc6a, 0xec1704aa,
-	0x26fe9d17, 0xbe0b5ec2, 0xc64d6d64, 0x9655fcbe, 0x3130f19b, 0xc91595ce,
-	0xfbe4ed74, 0xae6d4711, 0xe8efcc2c, 0xe705a74a, 0x9215c4ed, 0x39df69be,
-	0x1ee18f70, 0x3f0708ab, 0xfb259ad8, 0x5adcb39d, 0xbdf291bc, 0x151ac21d,
-	0x67cafa07, 0x5fd85efa, 0x75e62dfb, 0x046217ea, 0x35b289e4, 0x74bce56b,
-	0x96d610fa, 0xe71a78c2, 0x02b4e6d4, 0xe43a01d8, 0xdb63fedb, 0xba0ec701,
-	0x3d30ae98, 0xc10e7ad0, 0xbfde9c8e, 0xe9ca32f4, 0xcbd03efb, 0x7e81b1c4,
-	0x522f1b88, 0xb6be38ab, 0xe078493d, 0x6d176c77, 0x93b48f2c, 0x67be023c,
-	0x9f8319f0, 0x1d785d10, 0xdef89d89, 0x22534752, 0xceb5be1e, 0x75b3e9c1,
-	0x7825612e, 0xe24bab6f, 0x6e750bfc, 0x72ea9b4e, 0x758bfbf8, 0xa8efce1e,
-	0x97f9c11b, 0xdf9cbceb, 0xd3813755, 0xf98aeb57, 0x08afc1bb, 0x0c97cc3e,
-	0x27f063be, 0x3e0cbe83, 0x73574a15, 0x17b8cc09, 0x1f99ed41, 0xeb107c1a,
-	0xf27414b0, 0xe9cf0327, 0x092fb14a, 0xceb450fc, 0x5228ff06, 0x0aff3dcf,
-	0x22bdb9c1, 0xed22ed92, 0xf6c1f242, 0x079f0748, 0x0bb176a9, 0xdbfa89f6,
-	0x0eef47bc, 0xad6f873a, 0x88358450, 0xc4bc7f8e, 0x7441ac29, 0xac596f3c,
-	0xd9673f29, 0xa4f46ffb, 0xd18ddffe, 0x1e69b372, 0xe2797e47, 0xf7d13ff1,
-	0x4cf2fcdf, 0xf34ef026, 0xc608fcd8, 0x9f5c2bbd, 0xd79cab47, 0x9796765d,
-	0x7d4b86fa, 0xd4b86fab, 0x08e3f0b7, 0xa23dcf8a, 0x2d24a3e3, 0xb1a79df6,
-	0x9baeec6f, 0xb44ec047, 0xfa4bde52, 0xf2a3f804, 0x2bf8e8bf, 0x70c6165d,
-	0xf7d06d2d, 0x36dc706b, 0xb258f5c1, 0xf14ef960, 0xd7bf010a, 0x03d85fb1,
-	0x63882b24, 0x40afc38a, 0x6be52276, 0xab98ec0e, 0xe411f77f, 0x21d96576,
-	0x4735b396, 0x087fc724, 0x705ced9f, 0x83b2ca7f, 0xf6b44f5c, 0x466fc536,
-	0xc1daf50c, 0xc0e34037, 0x7ece695f, 0x1a2efd81, 0x547fbe15, 0x5f2f7fae,
-	0xa2e298ad, 0xf2ab6467, 0x959645de, 0x4259f3d3, 0xf91a473f, 0x96e832bc,
-	0x61c708f8, 0xdbe63796, 0xe7f10417, 0x597bfd52, 0xa714c58e, 0x9d967f79,
-	0xcd8f39fb, 0x9bdefd49, 0xcf9f6e93, 0xf7cdcffc, 0xa5fa8c05, 0x60ab0539,
-	0x835d2e4f, 0xf6cea6a8, 0x7d56d925, 0x7fa92e5e, 0x8b5ce839, 0x2ea2f8e2,
-	0x9e4307cf, 0x475f8539, 0xef59fcf2, 0xb9e17caa, 0xac8fe017, 0x9f1873fc,
-	0x75839553, 0x7fae4afb, 0x839634f8, 0x70ca91bc, 0xff12e1c8, 0x35fdcf85,
-	0xb55d711a, 0x97bda43b, 0x6b48a3d2, 0xfb60aaee, 0xf6878d5e, 0xadf81c49,
-	0xfaffefd9, 0xfbe67f0b, 0x14b0849d, 0xe3986e3d, 0x7c766ad4, 0xb06bf1ca,
-	0x7286f9c7, 0x1d5f1c7f, 0xf956beda, 0x4257f59a, 0x68a7c32c, 0x3c8997cf,
-	0x12979d8f, 0xf76ae7c1, 0x2aec4cac, 0x1fb4288e, 0xb0c1ce23, 0x358ad5ff,
-	0x59cfc39f, 0x9384d77b, 0xff65de92, 0xca1eeda1, 0x31384a8e, 0xeec62050,
-	0x5893b62a, 0x2c9fc705, 0xed38edd5, 0x63f64cfe, 0xd7772777, 0x2446a7ae,
-	0xdd5bb592, 0xbeb38831, 0xae84c428, 0xb649f4f0, 0xd3cf6b94, 0xfb3f823e,
-	0xe59536e2, 0xa2db8bca, 0x6cd43f78, 0xe220f07b, 0x529e6b04, 0x2d58edd8,
-	0xafce385a, 0x1c2a8766, 0xec1de7c1, 0xcfddf147, 0x5173f173, 0x8b5f404b,
-	0x66ef149a, 0xc3bb4f9a, 0x6823d31d, 0xbe80af3e, 0x87173488, 0xff470d35,
-	0x079ffcc6, 0x37920b7f, 0xc83f3517, 0xef548df1, 0xbf37cb02, 0x3c38e08d,
-	0xc1dec93a, 0x186ecf3c, 0x45f5fec2, 0x586bdb4d, 0xe116d83e, 0x8ce9e982,
-	0xe40f7ccd, 0x81de3e80, 0x9c8f296c, 0x67d1edd5, 0x1f59505f, 0x2fb13cc2,
-	0xb871e8cf, 0xf537bb46, 0x4b666f76, 0x5b26a7f9, 0xfea34fee, 0xd1a3a6a2,
-	0xc9fea8fd, 0xfa73ef5d, 0x166fbebe, 0x3df0b645, 0x223b93cf, 0xc9e09ef8,
-	0xfe39ff1d, 0x7cef1a35, 0x250498d3, 0xc89d9f68, 0xba7dc9b6, 0xf32fc641,
-	0x13d61725, 0x673d789a, 0xac28a5b7, 0xa4de032f, 0xf1dd9fb7, 0x3643df12,
-	0x1c1febe4, 0xb14b382f, 0x18a3dc86, 0x8d72083d, 0xd7bf55a3, 0x63dba6d1,
-	0xaffa6ffe, 0x5927bfd1, 0xe471f58a, 0xc4610d3d, 0xbd64b86f, 0x27b73522,
-	0xc1dcddf6, 0x97b899ee, 0x7192de2d, 0xfbb7a297, 0x737fe811, 0xbb678ddf,
-	0xbb9b52cb, 0x1c5ff227, 0xe0958526, 0xce887733, 0x875a9257, 0x347bbec1,
-	0x8615ca4d, 0xb56aad3f, 0xbf04bc22, 0x3e67445e, 0xd0aafde4, 0x49c90760,
-	0x563d7c67, 0x71daf161, 0x99d9463e, 0x3bb7ea2e, 0x75bec137, 0xec7c2ec4,
-	0x29d17b7f, 0xd2e927fd, 0xf618f20f, 0x7155a517, 0xd878ac81, 0xa9ba74f1,
-	0x41e54a9a, 0x29b553f4, 0xea390590, 0x2bda5d9c, 0xa9fd0e51, 0xabd640aa,
-	0xfd14e9d7, 0x69a3dfa0, 0xf72c0bae, 0xd0128cee, 0x44af2c3f, 0xd3c8bb49,
-	0x41614dce, 0x1cbf76e7, 0xc777118b, 0x66df4afe, 0x0bcc3f39, 0x7b22fcf2,
-	0x5de41663, 0xd145dc63, 0x39de3c8d, 0xe145bc7d, 0xa39fd28d, 0x3ea211c7,
-	0xec136f8f, 0x267b6a77, 0x33e6e58c, 0x632f2dc9, 0xf4cf33fc, 0xa387b8e7,
-	0xbb05fe69, 0xf1c9dcb8, 0x86cf95e7, 0xd3df3005, 0x5db144cf, 0xca4db4eb,
-	0x12a3a763, 0x143b1e59, 0xf65cf0f5, 0xa6153d63, 0x5a742ec0, 0x9424f611,
-	0xf2c1ee6f, 0x32dd6540, 0x1254d7f6, 0x4b1c817b, 0x7fc804e9, 0x67f737a7,
-	0x37e9d17b, 0x415cbe55, 0xbbe357df, 0xfee71a26, 0x0880f58c, 0x799e23b6,
-	0x83fd6ff6, 0x5a463bfd, 0x3ed994f9, 0x5183d066, 0xf923945e, 0xd48e5160,
-	0x71c86e53, 0xd11d5a71, 0xaf3a70f4, 0xc207f253, 0xb481eb03, 0xef61131f,
-	0x3bb4d23f, 0x9c048951, 0x09ff5903, 0xfa956fb8, 0x366d99d6, 0xbe5553f6,
-	0x3b65e512, 0xf157ddd4, 0x554ac97d, 0x1695e3ca, 0xf950df79, 0xffb656e5,
-	0x2ce33fd4, 0xde083c00, 0x6db6dfac, 0xe471f556, 0xf4b7a7b8, 0x808d7e91,
-	0x10797f9e, 0xc62635fb, 0x59537989, 0x0790dace, 0x2a7a5eb8, 0x69fee382,
-	0x34e22f1c, 0x73f67f2a, 0x0598cf09, 0xc1d027ac, 0x4ab9fccd, 0x77d5cfe7,
-	0xfb83135f, 0x955de210, 0xb25c79ef, 0xff827a7a, 0xd1ebc286, 0xbf3f9d1c,
-	0x83f338fc, 0x8837da2a, 0xfbac5b0f, 0xab3f1713, 0x78b95cb0, 0x308f35d5,
-	0x26c77ddf, 0x5ce22f70, 0xc1d183d3, 0x91cfa8f8, 0xbdb3b0fc, 0xa62feb87,
-	0x5bfdb2fa, 0x2d9f3cd1, 0x13e60f36, 0xddefc78a, 0x07f559fe, 0x226cafb5,
-	0xcaef22f9, 0x2d125ff5, 0xf833fd3f, 0xfb2736cb, 0x7cff0951, 0xadacea3f,
-	0x7fd60169, 0xf32779f6, 0x72b1b39d, 0xf3a49fdf, 0xf98d97d4, 0xb66bf4dc,
-	0x9a61fccb, 0xd0b439c0, 0x98d7ee6f, 0x9b1cead7, 0x4f78b7a4, 0xd544fc0c,
-	0x47f40f84, 0xb711f9f8, 0xedc6d77f, 0x40b3d743, 0x4fb1d76f, 0xba608f9f,
-	0xe24bdb39, 0xd90bece5, 0x8d1d9e7c, 0xf34ef495, 0x74de854d, 0xb8a65636,
-	0xa87a0499, 0x387a4974, 0xed89a63b, 0xed956702, 0xc9b51e9c, 0x74cb9576,
-	0x5fd13b7f, 0xb407e812, 0x63aabb09, 0x19e40b4d, 0x05e1f9f0, 0x4f70069c,
-	0x0e8ed43b, 0xd7f9c53a, 0xe333efaa, 0xebf6051d, 0x89a79fb0, 0xba6bc7ef,
-	0xedb5593c, 0xf0257f4a, 0x614db554, 0x197fda7f, 0x13acd0fd, 0xd1003f0c,
-	0xc29f62e5, 0x6e2c22ef, 0xfb116db8, 0xbdac96d3, 0xac6f7415, 0x6f7eb163,
-	0xf2a2a8fc, 0x693a8e7c, 0x395ee4ff, 0xdfdf019e, 0xef1d28e7, 0xf38cb875,
-	0x3bf0f68b, 0x47496e39, 0xfea46d94, 0x35941aaa, 0xa19a4e3c, 0x19f5cae7,
-	0xd8b02270, 0xaa3be761, 0x6eeed3df, 0xbb3cc6fd, 0x9d31cf9b, 0x934d1fcf,
-	0xdedb93f7, 0x2fccf796, 0x26243d7d, 0x41e45bee, 0xf46061be, 0xd063b887,
-	0x22f3f520, 0x35f61cf8, 0xcf34ebec, 0xff660dac, 0xe653ce4e, 0xe66d80fc,
-	0x730eee7c, 0x9cd9af3e, 0xce6ebcf7, 0x0ee309ff, 0xf41384eb, 0x4235c46f,
-	0xfd0a46ff, 0xf5261ddb, 0x7fa1e46f, 0x8dfe8523, 0x91bfd0ef, 0x3c8dfe87,
-	0xa1e46ff4, 0xfe85237f, 0xfeeeef8d, 0xba554e12, 0xe07814bd, 0x4eddbab8,
-	0xf7813e23, 0x89d9c5cb, 0x558547cc, 0x1717a5ea, 0xd8fcb2e5, 0xe29a6f61,
-	0x11937b60, 0xad18958f, 0x1c47f785, 0x2ab2d280, 0xb1db8d39, 0x55f6ba1d,
-	0x2aae8769, 0xeec24670, 0xe4f2bad1, 0xa73d882a, 0xd418b4a3, 0xdb6b68bf,
-	0x2f56f802, 0xff7ec03b, 0x77eee5d6, 0x63f893af, 0x5f118bfb, 0x0f738255,
-	0x25f49b7c, 0x71ee7719, 0x4353db04, 0x4d6244fd, 0xd3f21e50, 0xd43e733a,
-	0xe6be042f, 0x46abed35, 0x6c6fc7c6, 0xfbe0c96d, 0xe0e33e9f, 0xea9f69fb,
-	0xcb313bf6, 0x2198f2c1, 0x1bce23cf, 0x9f7a5970, 0x95e709b2, 0xc31c7fa7,
-	0xa650fdb9, 0x68617ee9, 0x0879765a, 0xf91df3cb, 0xe3058a35, 0xbe5f4f94,
-	0xcd6af58f, 0xedd2e7cb, 0xd7b2dcfa, 0xeef34c5b, 0xd1370fef, 0x71adc0d1,
-	0x5ecc7e21, 0x7783faa6, 0x31f887a5, 0xa7ca9807, 0xbe6219ad, 0x8d7c5f8f,
-	0xbdafbca9, 0xa1cf6e23, 0xfce4b9fb, 0xa5ceb25c, 0x6f5e02c8, 0xc554bd68,
-	0x6ff827f3, 0x4e52dbc5, 0xc673a72d, 0x2bbfaf1b, 0x9d7f0052, 0x57e03277,
-	0x858b64d1, 0x3f4cad9d, 0xf332c487, 0x15615cb9, 0x275c573e, 0x84b855dd,
-	0x7fda9637, 0x654c6d69, 0x47e5fa3a, 0x68812aa9, 0x3c9680d1, 0xde8bafe8,
-	0xe838727c, 0x98dd5aaa, 0x3bf2a2ea, 0x5c16ff14, 0xb7133f20, 0x9524713d,
-	0x495aa927, 0xaa73c27f, 0x1cff702d, 0x19edd1f0, 0x7ca4ef02, 0x68a5e6ba,
-	0xe9d41f8e, 0x0ae6d52f, 0x6c6c1d07, 0x814f5954, 0xeb8d4cfd, 0x8d8d93a4,
-	0x6bd0e1f1, 0x3e28c62a, 0x5c06c7c8, 0x8508fa0c, 0xefefc907, 0x97bd69ba,
-	0x94f7c90e, 0x752e758c, 0x41a2fac9, 0x07de37b6, 0x5c7bd630, 0x372b47d7,
-	0x3b7591be, 0x7fd73f7d, 0x7e1b9e5f, 0xbc5dbadc, 0x6d96c5ee, 0x7d29925b,
-	0x85dda1c7, 0x7b7d2d75, 0x1a48f45c, 0x326dcbe7, 0x75b3fdae, 0x23e13e4f,
-	0xe3777a7e, 0x0fe87693, 0x9dbf5695, 0x6679cddf, 0x0ef11da3, 0xc8dd6fd7,
-	0x2d6c17df, 0x71807b61, 0x1194eecf, 0xa3c3ad97, 0xc1b2ac62, 0xde3ceb45,
-	0x1585ca5f, 0xa69e32e1, 0x46f51d48, 0x55b5d602, 0xa6bac7c9, 0xe3b76f17,
-	0xf58781fd, 0xa6fba17a, 0xa2b4f0fd, 0x357bb01e, 0xd4c71c29, 0x11993edd,
-	0x64fbcfe8, 0x4e34e5da, 0xc81e5fa7, 0x8287de7a, 0x239c2fb4, 0xf5fa21b9,
-	0xf5da5561, 0x4ef9559a, 0x30903d98, 0x5ec2f20d, 0x35456ef9, 0x0a23439d,
-	0x710bb7a0, 0xa3c5a535, 0xd79d1354, 0xf6984616, 0xb4112cc1, 0x9bbfa8af,
-	0x7e532f45, 0x530cc4fa, 0x07d399fd, 0x0b9df886, 0x7f99cb3a, 0x8f7a6d5d,
-	0x9f2efaa6, 0xc7bb615b, 0x4a77f358, 0xbb3a62ef, 0x5abed4d1, 0x47bd354c,
-	0xf7a9e8b3, 0x6544ce18, 0x54e1c476, 0x6658f7e8, 0xeff54769, 0x169dfcad,
-	0x7dafda62, 0x927f3c33, 0xfd8da5e7, 0x7d3d8609, 0xe8cf7e16, 0xef0cbcea,
-	0xbc451788, 0x9a1dec30, 0x61691e59, 0x3c48553d, 0xa8f6eb54, 0x8f691cea,
-	0xd8b5f6aa, 0xf04d8f11, 0x4810a6b7, 0xb6151a6a, 0x477d5237, 0xdfcc9c4a,
-	0xcc3bef85, 0xdfd052f7, 0x521f9465, 0x42bfb04b, 0xdd686bcb, 0x606a1738,
-	0xd83b6247, 0x076c9384, 0xfbd1c633, 0xf434e837, 0xfed0807d, 0x33700c06,
-	0xbadcaeff, 0x822f60fd, 0xd8e2b4cf, 0x549dc47c, 0x95b14d35, 0x6f495ee4,
-	0x54bfff06, 0x7ebf6161, 0x4c03e1fb, 0x5615ed6f, 0xff4b8c8f, 0x78d4b876,
-	0x9435dda5, 0xbad0170e, 0xb05e7fe0, 0x15f8f143, 0xe9f00f59, 0x810cfa05,
-	0x70174a4f, 0x01d5e033, 0x7e7290bf, 0xe2286e3f, 0x0a7be426, 0x1425c057,
-	0x0b38fa9e, 0x2772c134, 0xf3cfcbcd, 0x8c57e90a, 0xb78fdd08, 0xb0ffd9db,
-	0xe52e1141, 0xf531e1bb, 0xf4e3b4b2, 0x6feb90cd, 0x2078a9db, 0xd97cdfbf,
-	0xe83bdfca, 0xd9c658a7, 0xde689f4f, 0x54f41daf, 0x8ccff72c, 0xeedc89cb,
-	0xdf5745df, 0xff864f45, 0xdd7e3426, 0x19e647b8, 0x1ab7dfa0, 0xf37d8626,
-	0x1be1c44f, 0xe77741f2, 0xe439c74c, 0x9910f1d2, 0xbcf9e5de, 0xe39d2a34,
-	0xbedd35cc, 0x4d69f068, 0x5b8c676f, 0x78eee542, 0x7e6f7bd0, 0x43557167,
-	0xfbf06a46, 0x1b4ada37, 0x975381db, 0xe25a73c7, 0x7ce22574, 0xdf2e5929,
-	0x4f763969, 0x29f844cf, 0x25b4ad8e, 0x8faea44c, 0x553439dd, 0x88be420c,
-	0x86d74fd3, 0xcfb60acd, 0x032de91b, 0x9c61f9e4, 0x872de7ef, 0x3f6167a3,
-	0x8d19dcae, 0x2bc5a190, 0xa2ee1fdf, 0xa2d9be73, 0xfec01a2d, 0xce7c8de0,
-	0x3cc6d70b, 0x390ce7d8, 0x516572a3, 0x5503c84f, 0x04f038ff, 0xb96d01e4,
-	0xea72112d, 0x81540fe9, 0xe73a1ad0, 0xe538be58, 0x6a7df494, 0xabdf0473,
-	0x2f08a53c, 0xd48b51fc, 0xd32e797d, 0x337cdb79, 0xd2708fc6, 0xae30c3b8,
-	0xc6124b7f, 0x30b2f8f5, 0x333cb6ae, 0x8bbb2ba6, 0x97aed691, 0xc316dff2,
-	0xa3dbacce, 0x0f23f721, 0x4b645fb9, 0xc8791fb9, 0xf72148fd, 0xfc0d7be3,
-	0xd71bf00e, 0x6f43e5b7, 0x39158df5, 0x8e1cf84b, 0x7f5c81cc, 0x01ee12bb,
-	0xf15dba3f, 0x8478e4f4, 0xf9e5620f, 0x2357821b, 0xb246dd1d, 0x5edd1059,
-	0x8221d977, 0x88c6ebe3, 0x9c7e5358, 0xbf54d923, 0x2a6695c8, 0xbfa93ebf,
-	0x7706fca9, 0x537f29be, 0xfd5348ce, 0xa6319e49, 0xdc468ffc, 0xc53faa60,
-	0x9f94c53b, 0xa9b66136, 0x12e28cfe, 0x59ccf953, 0xb3e54c8b, 0xf94cdbb5,
-	0x34ee2b5b, 0x92f1ffd5, 0xaf72a6e5, 0x0e715970, 0x231f4336, 0x3e85efb8,
-	0x6fede946, 0xe3064667, 0x4b38d475, 0x350cef97, 0x56fa900d, 0x39f7ae74,
-	0x09ee25d0, 0xe8fb0e81, 0xe2f680f7, 0xbf06199c, 0xfa914065, 0xe8324b70,
-	0x685eb426, 0xfd88a8f9, 0x6594f097, 0x9f6ee7ff, 0x313e2561, 0x43fdaaea,
-	0xfb7f2832, 0x5619e6c0, 0xaea32fe2, 0x3a52ffd9, 0xdcf17fe5, 0xf07cb237,
-	0x57284bfe, 0xfccbf772, 0xc822c134, 0x9bce06af, 0x8c75a3e1, 0x8d7d2eba,
-	0xba53da47, 0x5235538c, 0x9d7101c0, 0x00d20380, 0xfdd227d1, 0x5f489f44,
-	0xb72cfa27, 0xe8907109, 0xd221e913, 0xf7fdf14b, 0x3d2297a4, 0xd2297a4c,
-	0x452f4877, 0x297a42da, 0xcdd43fd2, 0x3a83f4e2, 0xb1fddb8d, 0x8fd382ae,
-	0xf7f096ea, 0x7196ea4f, 0x1f3a97fa, 0x8064ff7f, 0xb0087f61, 0x8bf0c69d,
-	0x091fc0d5, 0xdb2ede7b, 0xb1bf60b9, 0xabe795e2, 0x5facc7e1, 0xb0235a22,
-	0xb1ad5b4f, 0xfe9d1c27, 0xadf9eec9, 0x92089c55, 0xdee19ccb, 0xf8f006cf,
-	0xb7cc5dbd, 0xc447eff5, 0x84053eb4, 0xb5d34fa7, 0x3307e0b3, 0xc656ca0a,
-	0xeeb8ff10, 0xd03625eb, 0xae9687cb, 0xd5efa3ef, 0x03a7dbf9, 0xf7e86dbd,
-	0xa65dfd5a, 0xae321d6b, 0x6b6b5af0, 0xbfdbdb3d, 0x03c46e14, 0xefec33ed,
-	0x5ef958f7, 0xe085f2b1, 0xc104e8fc, 0x5b2ffaf9, 0x5af10e38, 0xcf892797,
-	0xc46f3d1d, 0xfdf87505, 0xef1413f1, 0x8de1f863, 0x2fc29f78, 0x3e41c75a,
-	0x77691d18, 0x0dc48587, 0x2fbedfc0, 0xbcc68fea, 0xc3277df8, 0x97d4ffbf,
-	0xf2f78022, 0xb5fe3f0c, 0xd834968e, 0xe1df4615, 0x33c704f0, 0xe57afe19,
-	0xe715168b, 0x64af1189, 0x3bcc638c, 0x15fd4aca, 0x5d23c674, 0x47ca6aeb,
-	0x757d465c, 0x93d7f724, 0x49dde3be, 0xb955e7aa, 0xec3e535d, 0x22aba3c7,
-	0x8ce9423d, 0xafa9e813, 0x3af1ea9b, 0x38d0bf0b, 0x1eb4624e, 0x1c7e8127,
-	0x01df9cb2, 0x48109d1c, 0xa39ffbc6, 0xb03dd897, 0xb88e3e83, 0xb8ce82b3,
-	0x088fd405, 0x2798c7da, 0x15f7edfa, 0xbcf217cd, 0x9df0cbd7, 0x29f492e6,
-	0x3f5e7adc, 0x2c6385af, 0x3d54bbdb, 0xfae61c5f, 0xcfd1046b, 0x90da19ad,
-	0x1fdfd481, 0x7ccc8c94, 0x7a3217d6, 0x094fdf60, 0x0bb04779, 0xf03119fa,
-	0xbc7e84ff, 0x05bdef12, 0xe942e1db, 0x418fc0c8, 0xbbde064f, 0x0e832ba3,
-	0x18d0e282, 0x65711def, 0xf4a17f7a, 0x199d1dd6, 0x43ad75f4, 0x8cf001d2,
-	0xae8320f8, 0xf89a2f94, 0x2ae8eb1e, 0x067f9f07, 0xc5d2855d, 0xe9257495,
-	0x0e27feb4, 0xba4aefee, 0xc007a4ea, 0x55d387e5, 0xf8f38a8b, 0x79a7a59f,
-	0xee3c626d, 0x765c97ff, 0xabda441f, 0x7c17b69f, 0x198c4ca6, 0x2e13120f,
-	0x62ec1075, 0xba32f5a1, 0x7f4a17a9, 0xbc6eeda1, 0x6e465da2, 0xfa71bb70,
-	0xaeda1959, 0x047aed12, 0x71c21bb7, 0xf7e96f11, 0x1a72de08, 0x999e2d71,
-	0xb90e5390, 0x2f2df26d, 0x27cc8de1, 0xf3a719ba, 0x096243f3, 0xee24bf9f,
-	0x854f40fa, 0xcb8d693a, 0x42fac85d, 0x71d76461, 0xedea3705, 0xdc5d7fc7,
-	0x4f8cf980, 0x37e3cb30, 0xf5fcf2ea, 0x0ffb91a2, 0xc6e1477d, 0xce59ebdc,
-	0x61477d0f, 0xfe3d40f3, 0x81a44d20, 0x8f0a17df, 0x0efe9f9c, 0xcfbea146,
-	0xc9ba7453, 0x5462ab70, 0x6a9bee1c, 0xaf321c56, 0x3c8c1de3, 0xfce3eb8c,
-	0xe9cfc20d, 0xfdc0224d, 0x0903a24c, 0x61091ff9, 0xc85fef93, 0xaa35bafb,
-	0x5790dff6, 0x4fba7b8d, 0xb057b53b, 0x4c440fcf, 0x4a77839e, 0xd7190dc6,
-	0x17f6ed0f, 0xdbce59ba, 0xb960c8ef, 0x16d2fb13, 0xde27c9d7, 0x5fba73a4,
-	0x8a37bca6, 0xfb46f714, 0x3bfa79d1, 0xbf91c73a, 0x40b96731, 0x736ef1bb,
-	0xfed193bc, 0x6138d726, 0x9cfeef8d, 0x776f29bc, 0xdecdd86f, 0x042ecd8a,
-	0xbd8adf7e, 0x7deb10aa, 0x45a7b62b, 0x4e7661a6, 0xafd2bd07, 0xa0d8b92b,
-	0xc6f1cefb, 0xc1dd78f3, 0x286b80d9, 0xff380d3c, 0xeb1eb800, 0x077bae0a,
-	0xaa379608, 0xad5f2423, 0xd57c908e, 0x58757380, 0x9ede7dc7, 0x5527f1c1,
-	0xf9af090e, 0x5611aecb, 0x2c17f512, 0x93f9c91b, 0xb807c275, 0x6092c69f,
-	0xf7b10f10, 0xce58eb09, 0x9ddcef1b, 0xe8bdf87d, 0x2ae79a24, 0x983ff687,
-	0x4082b9df, 0xe2844916, 0xbe7a86e4, 0x05fe7f8f, 0xaa7d03d5, 0xf1af754a,
-	0x96facec0, 0x7d71ef2a, 0xfe15207d, 0xd754f158, 0x0e55e8f1, 0x9f435f09,
-	0x98afd21c, 0x5fb1adf7, 0x80befe85, 0x0ef55f21, 0xc6dcf193, 0xe4eef73d,
-	0x92e1e1ad, 0x930ef5af, 0xebc0d8fc, 0xee7ebb06, 0x89c33f53, 0x3afca68f,
-	0x98abf59c, 0x2e4c6f58, 0xc28583ec, 0x76189fa4, 0xf904f695, 0x22b5ca7e,
-	0x945191eb, 0x13643c2f, 0x076f2a7e, 0x92794043, 0x1fb6b3f4, 0xef82a4ba,
-	0xfc294517, 0x6f71863e, 0x22c92c29, 0xc27c41dc, 0xbd370ee9, 0x13911b4b,
-	0x7947ca67, 0xc7ea997a, 0x9537488c, 0x98077ac7, 0x1427e3ca, 0x8a3df298,
-	0xefd536af, 0x29ac6b39, 0x68ddac9f, 0x31529faa, 0xf83794d5, 0x24fc8a58,
-	0xc5b92cfa, 0xb2efbed4, 0x34fd5352, 0x5ca9a55f, 0x319b3bc5, 0x25b7ab40,
-	0x81cf1127, 0xd58c9fca, 0xe3de434b, 0xf0cb08b5, 0xfe6b77ce, 0xcbde5a33,
-	0x80b91099, 0x6cc9afdf, 0x9e7999fc, 0x2c6b44ea, 0xcdbbd7a5, 0xc928b17c,
-	0xb9171f9c, 0x71df814f, 0x9fcccb9c, 0x4d589653, 0xeae51ff9, 0xe44f34fc,
-	0xbbe3ddb1, 0x300daff0, 0x4e143fe1, 0x7efc0f44, 0xef9d3b68, 0xcdebcc3e,
-	0x070f7e32, 0x75e0937e, 0x0c126fc0, 0x824df807, 0x049bf0f3, 0x24df87d7,
-	0x937e1cb8, 0x8721f2e0, 0xd61ff8cc, 0x55ffc662, 0x6ff1991f, 0x787765d0,
-	0xa66ad91a, 0x9a29a10f, 0xba782df2, 0x7e9994e6, 0x1d73f142, 0x09b15b89,
-	0x09e287c0, 0xbe387fb8, 0x8be08656, 0x37f7c3f0, 0x31477bdb, 0xd7d71e7e,
-	0x20606d75, 0x3a2e97df, 0x6fbc0aa4, 0x71f3ac63, 0x6d3fdcfd, 0x89731ad5,
-	0x5dcefccf, 0x763e0490, 0xdb7e909d, 0x4f1655f1, 0x207fba80, 0x29d99c64,
-	0x3fa843da, 0xaa52fe2b, 0x26d2741d, 0x0e7bcfdf, 0x95d8797c, 0x123eb2f1,
-	0xf6bef84f, 0x27be54cf, 0xa8d2c475, 0x8eaf8f80, 0x9f009ed1, 0x84bb9799,
-	0x8a249bd7, 0x5c402fb7, 0xa5857fd4, 0xafb73f22, 0x722dc7bc, 0x89fef95b,
-	0xa6e727c1, 0x2da9b8c8, 0xdd7fbab9, 0x9ea7e323, 0x777295c9, 0x71c5c794,
-	0xf2b925de, 0x8ba90d7e, 0x010773a9, 0xd99d873e, 0x0b3acf80, 0x8ad9ebbf,
-	0x9d09e47b, 0x0f21c8f7, 0xa3ecfe43, 0x1ff57fcb, 0x47581c3b, 0x3a617af6,
-	0x1dfbfb7f, 0x81e2f8a6, 0xfca65d5b, 0x5324a6a0, 0xdcbbc1fd, 0x40fcf2a6,
-	0xc87ca98e, 0x3f298f21, 0xa98465ac, 0x791f55fe, 0xad91f94d, 0xaff54c13,
-	0xca6c5539, 0x47b688a7, 0x8abedf01, 0xcd1c53b4, 0xb9fa974d, 0xe4dc705b,
-	0xe563bbdc, 0x7edd5f7d, 0x46fbc861, 0xd3a6b9dc, 0xd11ea875, 0xe8e52ed7,
-	0xf52164fa, 0x1fae8746, 0xa13eb30a, 0x1de371e9, 0xe67c58f7, 0x5e2371b8,
-	0xd0ef43bc, 0x7b8e8af5, 0xe2f19d34, 0xf178e0de, 0xbf5d61b9, 0xc75e7d1f,
-	0xfbfce87b, 0xeb7ae5da, 0xbdf3b4ef, 0xa15e631d, 0x96c949f3, 0xd1d9bb74,
-	0xbfaabdf5, 0x46fb4ae5, 0x25f1666b, 0x3613fdd0, 0x6dff2b4f, 0xf3c62b84,
-	0xb75e22b4, 0xcf7617fe, 0x8f77f70a, 0x5cb07737, 0x658b1ccf, 0x8e5c94de,
-	0xddfd338b, 0x92418884, 0x7583adbe, 0x78c84afb, 0xdc646373, 0xbbb1889a,
-	0x8fddbf41, 0x6499e127, 0xff7c0d17, 0xf167bf4b, 0xf74d35e3, 0xbd8e68a1,
-	0xce3f7f51, 0x4c3d036f, 0x59f24b1c, 0x5b13c93e, 0x49143d7a, 0xcb13ca72,
-	0x8a9f6cac, 0x3757fe7b, 0xde75fafb, 0xfa4be99f, 0xb203e810, 0x07a8f40e,
-	0xb72954f2, 0x2beb920c, 0xb8eebf52, 0x187ec0e7, 0x43f3f421, 0x174fbc70,
-	0x6874c6f4, 0x75dfe3ac, 0xdba0c1ef, 0xfa193850, 0x3be3d0af, 0xd2f319fb,
-	0x07ec67e1, 0xfdc67e03, 0xb66df713, 0x7c914de2, 0xe202658f, 0x6dfc0ce5,
-	0xc6f693c9, 0x503c3a05, 0xbba8fc0f, 0x6e6a457a, 0xedf7ec0c, 0xeae31dc2,
-	0xea3b0e82, 0x62e09bff, 0xfbbbbfc0, 0x87f1dd6d, 0x5df0be50, 0xa3baddf7,
-	0xdef67fd3, 0x909f105b, 0x5e3a4bf1, 0x1c2cfdfc, 0x94777017, 0x323f3f79,
-	0x9189f248, 0xe4fdf483, 0xccd6fd23, 0x0ffc042f, 0x9d552bf5, 0xbcf3c85f,
-	0xdf98ad24, 0x8af9c6af, 0x37f35bfb, 0x8847f94a, 0x87abc4e2, 0xe36f8fc2,
-	0x7ad7cbfb, 0x4a6ddb05, 0xde3f151b, 0x75f12af9, 0x9fb30fad, 0x0772cdcf,
-	0x26c83bbf, 0x46576a4d, 0x5da5f6ed, 0xc2facef9, 0x60eef948, 0x0beafbe8,
-	0x2f19bd75, 0x86df606a, 0x19eebdfa, 0x3cb1fba4, 0x9cf2c3c2, 0xa150d71e,
-	0x37a0e9d7, 0x0e6f7cbf, 0x31f6327a, 0x671f1ca5, 0x3f0dcdc0, 0x3cce90d4,
-	0x073c37c1, 0xb58379e7, 0x0ec5f8cb, 0xab7e1af8, 0x61ecbf0e, 0x1a1127be,
-	0x77ce718f, 0x3f2bba20, 0xeb1fe198, 0xf8741f6e, 0xefc3bec7, 0x89691ed6,
-	0x69f1dfc6, 0x67df26df, 0xfd5bf4e9, 0x22cbb865, 0xf03153fd, 0xfdeab53f,
-	0x5d798d89, 0x96d50fdd, 0x9438e4ef, 0x73b68b66, 0x2cefad10, 0x7b778ff5,
-	0x9fdc89ef, 0x26117788, 0x2ba976ea, 0xcdcbadd7, 0x8fe914a3, 0xef8ca9f6,
-	0x5ef209f6, 0x8151f13d, 0x4fc4677d, 0x0481114c, 0x4a1f86a4, 0xe1923d5b,
-	0x4aa1f86f, 0x9e792302, 0xda17ea33, 0xeb68e4f0, 0x851577a3, 0x53fd3bbb,
-	0x5c647dad, 0xaa7e7754, 0xb9f39769, 0xaf97e9bf, 0x183e7ee1, 0xb6e52694,
-	0x036efb86, 0x2ad80d9d, 0xab67586c, 0x4bbfebad, 0xabf3a851, 0x3d9ae812,
-	0x96ade282, 0x962fbc2b, 0xbf88c22a, 0xe46f3e62, 0xf9ea352f, 0x7dbf9922,
-	0xeab7cca5, 0xd16da7ef, 0x275820ed, 0x7a07ac52, 0x4edd36f9, 0xc5207582,
-	0x7c1df03a, 0x35f0790d, 0x90d7c1e4, 0x0a435f07, 0xa5ef86be, 0x761538a2,
-	0x0ad3f85b, 0xfc07f683, 0x72418569, 0xc169fc13, 0x82d3f879, 0x169fc3eb,
-	0x5a7f0e5c, 0x69fc3970, 0xd3f879c1, 0x9fc3eb82, 0x3f879c16, 0xfc3eb82d,
-	0xf879c169, 0xc3eb82d3, 0x0e5c169f, 0x39705a7f, 0x79c169fc, 0xeb82d3f8,
-	0x5c169fc3, 0x62996f3e, 0xd3cdb7f2, 0x5b287fdf, 0x51f4cf1f, 0x9b1c5198,
-	0xeffdf847, 0xc4fc7f88, 0x373c0e96, 0x2edd022f, 0x48f70ead, 0x904e373c,
-	0x8908b778, 0x8cd9b6e7, 0x32ecbbe7, 0xb4e3245f, 0x7e07e943, 0xf49b42ab,
-	0xdf85215b, 0x56fc290a, 0x2ab7e148, 0x2b7e94cc, 0xe15bf0a4, 0x4856fc3b,
-	0x0a42b7e1, 0xf85215bf, 0x6fc290ad, 0x2b7e1485, 0x0adf83b4, 0xf856fc29,
-	0x5215bf0e, 0xfdf0adf8, 0xfe03cd08, 0x905e632b, 0xf499fbf3, 0x9343a252,
-	0xe532ea5e, 0xd707e721, 0x5c1f9c87, 0xb83f390e, 0x707e721c, 0x707e721e,
-	0xc1f9c87d, 0xdc8349f9, 0xef20bfbc, 0xbc83b707, 0xd41f9c1f, 0xb6037be8,
-	0x2e1b49ab, 0x35b48ebc, 0x7142794a, 0x2f353109, 0x8bfc2673, 0x35254ead,
-	0x6d8423d6, 0x859980f9, 0x38f4d794, 0x66d13cc7, 0xae39be01, 0x05a6f080,
-	0x0f65c704, 0x5cc97ffa, 0xf9b3f86e, 0xbf9ef087, 0x50deb043, 0x35afdfa3,
-	0x4b847bda, 0xefd46a45, 0x2f5d77cc, 0x1ea37c74, 0x79a0cbf3, 0x8f996290,
-	0xbbfc9378, 0xaf700b22, 0x91458b60, 0x642bb8f1, 0x5d28743c, 0xe793caad,
-	0xf6cb16fb, 0x5388e1fd, 0xb83c5129, 0x156591ef, 0x80056c87, 0x7e0292d3,
-	0x562f2af7, 0xab92d75f, 0xcc658711, 0x124bb0db, 0x867be09f, 0xbd84daa3,
-	0xfd19c69c, 0xefe3b085, 0x4bb44c73, 0xa0ed0279, 0x29f40e6f, 0xf4414dde,
-	0x9e4f2cbd, 0xb6ef9a7b, 0xfbe9cbab, 0xae4b6dc0, 0x89c5fdc6, 0xd3ddb2e1,
-	0x386689bf, 0xf8506e4e, 0x6da8ce9e, 0xc9fb8bc2, 0x3a7e75cb, 0x5ecb9b70,
-	0xf8bae3ce, 0x6fd1a3de, 0xbe5486c9, 0x5a2259a7, 0x450f710b, 0x3df8550c,
-	0xb46e037c, 0xbeb1d7be, 0xb02ada2c, 0xfbe0ff2f, 0x7e2e244f, 0xa34ffb9f,
-	0x2116c687, 0xcb3450ae, 0x0d2742f7, 0x83d9592d, 0xe5f9a5e6, 0xbfa3a17b,
-	0xe706f258, 0x85ef929f, 0xe70cf932, 0x9879f1f9, 0xfdf853ed, 0x8dbec995,
-	0xee370496, 0x25b72f65, 0xe136fea2, 0xf5055881, 0x8d8af708, 0x168ae575,
-	0xbd01538b, 0x41f10388, 0x639c47f4, 0xdf25e83a, 0x59f7e363, 0x365d58a6,
-	0xce431bf0, 0xb1c97129, 0x3151d48b, 0x4432cf7c, 0xd0d4b84e, 0x7e62e383,
-	0x3b4e9c78, 0xba5fe7df, 0x8572c9d3, 0xbe615eb6, 0xc65f3e79, 0xf6dd56bb,
-	0x7a4b70e1, 0x99ce9c67, 0xbc16ff34, 0x7d267b03, 0x8508f47b, 0x79bd88e5,
-	0x0da3d704, 0xcd3df12f, 0xf06f9592, 0x0d4b943d, 0xfbcb450f, 0x52ffd26c,
-	0xb0cdc3ae, 0xf1d7cd3b, 0x69c7ae53, 0xef93ab1d, 0xcc39d33a, 0x6a5caeef,
-	0x119cb1b0, 0xf21a2f2a, 0x911ef1a7, 0xc23fae10, 0x60d153ce, 0x0bc03be3,
-	0x4aac94d7, 0x91ca5712, 0x7339758b, 0xe38d8351, 0xf7f42ab2, 0x6eff42d4,
-	0x1e3d62cf, 0xf356f16b, 0x42f24ff7, 0x7de350e4, 0xc94ebd4d, 0xb06607db,
-	0xc6c4b43c, 0xcb39cdfe, 0xb6247ca5, 0x93ee3f0b, 0xce3e59cc, 0xe666f782,
-	0x947af4ec, 0x5de9e82e, 0xd89a4e5d, 0x4ff864ea, 0xfcc11cb9, 0x14e5ea65,
-	0x397cdfce, 0x9799d399, 0xee2adc65, 0x5a6e8122, 0x073be48b, 0xd1f2ebef,
-	0xc6b1c40c, 0xc9eb3e43, 0xf44eddf4, 0x74f2218d, 0xabc035be, 0x3878801c,
-	0x44ada6d1, 0x8dc4ec9c, 0x4d83ef82, 0xfd451c82, 0x155c82cf, 0x5691fd8f,
-	0x2661f7c4, 0x68bf7c28, 0xf4dbd0d2, 0x43fb40fd, 0xf7e13f30, 0x29c2b457,
-	0xcd39c47e, 0x805bb6d2, 0x685f637f, 0x5efca3be, 0x629f24ea, 0x9a923bc7,
-	0x741b6fae, 0xe63fba1f, 0xb276e846, 0xeb076948, 0xb26193b0, 0xb7c92478,
-	0xd3e4266a, 0xf66db0b9, 0x608109d2, 0xcb2b951f, 0xd576fc7b, 0x419206cc,
-	0xc9fb55ff, 0xde458b1c, 0x9039233f, 0x96880bef, 0x2f949ea2, 0x4014a359,
-	0xf5e6323f, 0x38ec67b9, 0x3a4eb0cf, 0xa7d8ed28, 0xd2e51ef2, 0x7e4d327b,
-	0x8cb4d09b, 0x34fd8de0, 0x27f5a637, 0xf468610a, 0x1c2de160, 0x85ebf781,
-	0x005428f1, 0xe8b798f1, 0x3bc1eaf9, 0x973ab4ff, 0x91f9c4e1, 0xa6687dbf,
-	0xe05ff22f, 0x6b147393, 0x4b1bdff0, 0x0d5768b2, 0x50f7c1ee, 0x11bf03c7,
-	0x9efc6db9, 0x4bb64a44, 0x7b10a9f2, 0x8960f54b, 0x4bbb50c7, 0x773cae59,
-	0x7a9dd584, 0xdc7bfb2b, 0xd634b76c, 0xbe66cc7d, 0xf3a46be7, 0x5ee7eb07,
-	0x9ee7bfdd, 0xf916c3ca, 0x1663c2fe, 0x8857f6ff, 0xd0f72f5e, 0x8fbd6066,
-	0xe79ede21, 0x8cfaf1af, 0xf83a4cf7, 0x896efe95, 0x96474f41, 0x2afbe25d,
-	0xb77691a5, 0xe54f441a, 0x0fbe15ab, 0xde4cba5a, 0x2b56d6e7, 0x6e845df2,
-	0x99bf58ec, 0x9efcbffd, 0x117e6fd5, 0xf8750b2e, 0xbcb7b1ce, 0x84eb48e1,
-	0x3d979fef, 0x347c9360, 0x0efb8990, 0xf2712cb7, 0x7b9fd9bb, 0x0f06ab8a,
-	0x8c3c9e03, 0xe5d871a7, 0x8c4b7f54, 0x4bdf04b6, 0xd841cb45, 0xfcfee71d,
-	0xba8f7e6d, 0xdf8d39b6, 0x95d92cbf, 0xd9ef0abf, 0x7ed1ee7c, 0x4497f582,
-	0x4790ecba, 0xf9621a6a, 0x53db9e7c, 0xda2bcfbf, 0xe067cfd8, 0xd2c1bee7,
-	0xbe7d778e, 0xaea2e71c, 0x6cc01157, 0xbaf54c53, 0xf61a63b6, 0x4b3b50d1,
-	0xdf21bbe8, 0xdd815765, 0x5f641ec4, 0xb632ec35, 0x71b3639c, 0x77b1cfae,
-	0xf73ef7fd, 0xf437f3ea, 0x7a1df9da, 0x9ef8ee6d, 0x2ad7ff90, 0xcbd3d82e,
-	0x7133dd23, 0x90fca1bf, 0x62b4910d, 0xbe5b9c62, 0x7c8f731f, 0x8ef4a63f,
-	0x7367e67c, 0xdc029380, 0xfbc9193b, 0xe94fdcb8, 0xfbf7ee90, 0xf40f6bad,
-	0x0a7a0dd9, 0x821df978, 0x1ed79772, 0x951f2417, 0x77a62a35, 0x0bfc8c24,
-	0x97c95583, 0xfc00dd48, 0x9a477c7e, 0xcd396f1d, 0xf1093121, 0x27417b99,
-	0x51db3ac3, 0x993f8e3d, 0xca0e2e98, 0xfe14bdf7, 0x2f18e4bb, 0x955beff8,
-	0xc3df9a36, 0xdf2cfaa0, 0xc51c1aed, 0x68b895fd, 0x5d4869dd, 0x03824f3c,
-	0x3eeda9c3, 0xe3cdcfea, 0x02ca3e30, 0x07ec1b7e, 0x42f71073, 0x7e5c5bf9,
-	0x6d29c61b, 0x68d4ef90, 0xda38e46b, 0x20fb58ea, 0x975607c8, 0x5cb04fbd,
-	0xbddf20d8, 0xddffa39e, 0xcb2f9a11, 0x2704e5cd, 0xee33b3dc, 0xabc286dd,
-	0x797f9f44, 0xce59ac63, 0x036b5c6c, 0xf377667e, 0xdd39c65e, 0x30da5d0e,
-	0x2837df86, 0xbef97ab7, 0xfbc3a68a, 0xf79cdbb3, 0x7b325fc2, 0x34b623dd,
-	0xb065ffca, 0xe9cf6b94, 0x7a6271fb, 0xa9df9320, 0xf1c9cdba, 0x8d5db3e3,
-	0x780edebc, 0x81f0443f, 0x662ae2dc, 0xf89d1378, 0xbe596f10, 0xcedf8cce,
-	0x77c944f9, 0xf095d7fc, 0xd5605bfe, 0x79e0aeec, 0x8997dfac, 0xb4d9a1f8,
-	0x970ef1ef, 0x1f7c6970, 0x3343c4f6, 0x6205eff9, 0xe6cf1c9e, 0xbbc78f71,
-	0x4c374453, 0x18fd06d7, 0xf18df3f7, 0xb4ab1eac, 0x6bbe7bc7, 0x420f7a9f,
-	0x7c27af4e, 0xddd00fc3, 0x02e3b53e, 0x2f6b8d26, 0x5e07ef97, 0xfdf4efc1,
-	0x6a01fffa, 0x00d36c91, 0x0000d36c, 0x00088b1f, 0x00000000, 0x7dedff00,
-	0x65555c7b, 0xd6bbf0ba, 0xc0d857da, 0x51b08b66, 0x62020dc0, 0x10106d11,
-	0x80a17515, 0x636a735b, 0x8dc42937, 0x910150b7, 0xf39fa8ac, 0xa96f0db1,
-	0x962a2695, 0x8da6b675, 0xb2707595, 0xd99b1b46, 0x0f5d9a6a, 0x39d38d3a,
-	0x32cdb653, 0x34d209bb, 0x99d37d9f, 0xde79e7be, 0x0daf60b5, 0xf9a675a4,
-	0x3efcefce, 0x7df5e3fc, 0xee7d7bd7, 0x765ef3cf, 0xb24c6322, 0x98783631,
-	0x8c81b183, 0x45931819, 0x77a13fc8, 0x6302edfb, 0xbeac7195, 0x28d2132d,
-	0x0b6bff56, 0xdfe3df63, 0xa2749ef8, 0x8f2c6453, 0x5da0dbb1, 0x10af7c1b,
-	0xd6ccabd9, 0x29d33df3, 0x148af7d0, 0xd41dd336, 0x7ec3fb1e, 0x13efd5e3,
-	0x338b69fc, 0xe3abea7b, 0xbb78d856, 0x9a7ed0a9, 0xdd8beb05, 0x3ea81bf5,
-	0x26e9b3cf, 0x3632c591, 0x87ff04db, 0x7b4894a5, 0x32e6c456, 0x7057b0d6,
-	0xe1a8a11a, 0x18b18941, 0xf08b9f48, 0xbec664b1, 0x3bcdf868, 0xcfbd40b7,
-	0x64af6f37, 0x35e67b43, 0x398a3fc7, 0xf7363046, 0x0c733652, 0xa5de6c60,
-	0x0f569431, 0x073864f3, 0xf8dbd506, 0xc607ba5c, 0xfb2dadbf, 0x5a307fdc,
-	0x30e59fb7, 0xbf73fef6, 0xe868e3fd, 0xde9f3197, 0x3acf4d7d, 0xa13ead66,
-	0xc304b2af, 0x4d73af8d, 0x83155746, 0x18b6ce79, 0xcd14121c, 0x64c55e5e,
-	0x33b32798, 0x13e41a67, 0x422bcc75, 0x16fd6cbf, 0xf3eb04d9, 0xb557fe30,
-	0x5da9905c, 0x824fbe63, 0x7a860cf5, 0xdf5e1cc6, 0x58f7f00c, 0x4884670c,
-	0x912de8a8, 0xcdbc1903, 0xf83d29f7, 0x21a90c1d, 0x89ef07a7, 0x5ecc1d0a,
-	0x7b6d0657, 0x330305f0, 0x65eb0f96, 0xfceaae1c, 0xbff32aa7, 0xfb20bd6d,
-	0x4e0ddea0, 0x2757cf07, 0x7ac1e61b, 0x364face7, 0x5cb486cc, 0x473e5ef9,
-	0x2f8dde5b, 0xccaf8aab, 0x4f587695, 0x57c71b57, 0xe13d3ad7, 0x2f4f6bab,
-	0xa931257c, 0x00771e67, 0x8e00d8be, 0xe382362f, 0x57c0530b, 0xa82f33a5,
-	0x7c70bfde, 0xedfe7ecd, 0xd0765e0f, 0xceffa8fa, 0x1dbe8d07, 0xb6acffd0,
-	0xf2b784bd, 0xc9f41bd5, 0x99ceaf50, 0xdb51704c, 0xb6cfaecf, 0x6de78032,
-	0x1debb7ab, 0xe8eefc16, 0x9521ee93, 0x413f1059, 0x6790099e, 0x3bbc40ba,
-	0x397ea7a2, 0x9c617ba4, 0x91cd8b25, 0x719edaec, 0x3cf428b6, 0x86da3ebb,
-	0xafaecde3, 0x7165887a, 0xf66777fa, 0x66b3bfe6, 0xa0b317ce, 0xb3cfe43f,
-	0xe424ce45, 0xd4510a8b, 0x3e9a9bf0, 0x79837884, 0x35e0063d, 0xdbc3fe23,
-	0x0c38469e, 0x6ce6145e, 0xa9a94f86, 0x8b8e1f01, 0x36f38cf4, 0x826bcc88,
-	0x8135a97a, 0x548f388b, 0x876c28a0, 0x528d8469, 0x1df90b16, 0x4802ed30,
-	0xee9e2453, 0xc3f5f273, 0x677e3f77, 0x5c3c8131, 0xa1cf4abf, 0x3b606af4,
-	0xfe00a757, 0xd9cc310d, 0x4fa1e8ec, 0x3e951fb5, 0x6fedfa55, 0x70ae7b7d,
-	0x3993677d, 0x3386593c, 0x56e304c9, 0xb9cc3c3e, 0x3afcb846, 0x0f00610d,
-	0x817ad05b, 0x7d6c0b58, 0x903537ac, 0x0fcd7657, 0x24a5b7ad, 0x86f58fb6,
-	0x93e553ae, 0xc3ce2639, 0x015127c0, 0xfad77798, 0xf10c51a1, 0xca2f302d,
-	0xcd8bb39d, 0x5d5bce22, 0x504d53d7, 0xbbb6e619, 0x33e944c9, 0xc368c04d,
-	0x764d3e00, 0xe4df3fca, 0x29adb4a0, 0x9ddbca83, 0x633f9a36, 0x80698881,
-	0x85308aa7, 0x8f3cfdff, 0xe54165e5, 0xee9c6d53, 0x11035b4e, 0xfd3920b6,
-	0x0d79bd71, 0x0efa428b, 0xccfc883c, 0x5db2871a, 0xf5e9d430, 0x4cc42367,
-	0x3f3e4fa4, 0x7d12ddb5, 0x163fc927, 0x02ec7061, 0x24b19b96, 0xe02374fb,
-	0x38f2ee6b, 0x9b129027, 0xe49438d1, 0xb46f0cc2, 0x7eb00093, 0xcc78430b,
-	0xf860e453, 0x2395aa92, 0xb26b7eb1, 0xe6718055, 0x5ae79c5a, 0xced5fda9,
-	0x4b7bf1fb, 0x93252199, 0x9026caaa, 0x72287763, 0xdcc0896c, 0xa07787c8,
-	0x12fe449c, 0xfea2a50f, 0xf055a3b9, 0x56cf291b, 0x21d7000b, 0x78d2eecd,
-	0x055b1394, 0xbb6c0ee7, 0xa9a9e40d, 0x0d769e47, 0x7a817f73, 0xf4077d81,
-	0x255ffd07, 0x5d710220, 0xca1c726d, 0x75824df1, 0xb979c317, 0x059f080d,
-	0x6e9c9d0a, 0xc8e11339, 0xa3eb81ec, 0x65105ff8, 0x288b23cc, 0x3d141b6f,
-	0x79406486, 0x310e4e45, 0xca41f870, 0x3a3f11da, 0xa0e909a7, 0xc51292cb,
-	0x886f28fa, 0xf2c38948, 0xc912ad39, 0xaa9e9545, 0x7c2835d5, 0xa3be1733,
-	0x2a912bde, 0x56be9162, 0x74a44cb6, 0xcd9286ce, 0x24e3a05e, 0x9a3b1dc1,
-	0xb867a3d6, 0x13b5399e, 0x55bc47af, 0x9b4630ef, 0x7a496f00, 0x104e526f,
-	0xbed9ce3f, 0xbb41892a, 0xd3cddbf3, 0x5b17fe51, 0xa1a38acb, 0xd16dbcfd,
-	0x1e9052d9, 0x7ae6ca49, 0xc4ed4164, 0xacf00638, 0x2791fbf9, 0xe78fa0ac,
-	0xe8569f42, 0x70b69bff, 0xd4aa179f, 0x924fed34, 0x31dee780, 0xa1b3e279,
-	0xe0f142fe, 0x1f50a32d, 0xe2a7be08, 0xce23bea9, 0x503c87da, 0x0fc073d3,
-	0xdaf7a00e, 0xf51ef5ff, 0xd6f895f3, 0xbed0e5f5, 0x4885f6a6, 0xa6e167ec,
-	0xa15be43f, 0x49e8a0fc, 0x173ffec3, 0x45653fb6, 0x9edd6c02, 0xee7c7a85,
-	0x4f28b4a6, 0xf917f21f, 0xbd51f100, 0xaaf8205f, 0x517c33e5, 0xc7bb8406,
-	0x4c560ccf, 0xf480ccad, 0x8d625e7e, 0xf6a80f68, 0x323e5a8c, 0xf3adcb9b,
-	0x9093eb51, 0xb53fe64e, 0xccf50925, 0x5f3c1167, 0x6fadd4f1, 0xecf2dca0,
-	0xaf101a34, 0x38331d1e, 0x41799f51, 0x551d22bf, 0x93c6ff03, 0x04ae61dd,
-	0x0eca2a7a, 0x6fceb827, 0x51fa411d, 0xa77c179d, 0xcc74cff2, 0xd218f385,
-	0x748d99dc, 0x7f9d67ff, 0xcff3e22e, 0x17a766f5, 0xf5cd99f1, 0x4bd79fdb,
-	0x05ee58a5, 0xe47b4186, 0x885febcf, 0xd8f4b548, 0xfbd2256f, 0xd67684b2,
-	0xea36428b, 0x76ccf0ed, 0x1bb22cc3, 0x9d59d118, 0xc359d395, 0xe0e97d01,
-	0xa8c7b218, 0x37e746a4, 0x05af85f4, 0x9dd5bd8a, 0x80d7b7df, 0x87b3527c,
-	0x6d3511db, 0x508ec867, 0x855a92ed, 0x39ee179f, 0xda857643, 0x871f6eae,
-	0x5e3eed4b, 0xc801955e, 0x80e5cd1d, 0x0aba4200, 0xfbf905f1, 0xd3d7f5fe,
-	0x7bf26997, 0xb5df7f29, 0x750f2e56, 0xb7a8499d, 0x349c64d6, 0x976bfe20,
-	0x5e42fd2b, 0xbcde341f, 0x2f0481ec, 0xc16a1f2c, 0xfd8d0ef6, 0x9a2fbb50,
-	0xc36bfbda, 0x97bea356, 0x4c3a2ceb, 0xa42d6b9b, 0x8bd5b7ff, 0x9c5cba19,
-	0xed13985c, 0x916183b9, 0x07472859, 0x06653c2e, 0x3b6a0248, 0xbe50888f,
-	0x2f73ca3a, 0x031c67d2, 0x6f5090ae, 0x5fb405f8, 0x74f95e3b, 0x6e3ff604,
-	0x066be048, 0xbf0bd753, 0xf20c5e9b, 0x2d981964, 0x06671f64, 0x0f1d2046,
-	0xf4e5cc3c, 0x1ab67ae3, 0xb9d31bf5, 0xf72834d9, 0x3c42dca3, 0xdbe61b7f,
-	0x1dffff05, 0xfec60ff3, 0x143fc999, 0xd0a4bddb, 0x5968dba7, 0xaebcc02d,
-	0x8359ea1e, 0xd041be4b, 0x222d935f, 0xac34a40e, 0xdfe7a1d7, 0x82757b55,
-	0xc113a722, 0xc8bb408e, 0x416ec830, 0xf3366e3a, 0xccb209f5, 0xf71e611a,
-	0x8d9e1e67, 0xa76d7a7a, 0x9d611989, 0xc8c33a13, 0xe41c4d7e, 0x6cd6bd22,
-	0x2dbd224e, 0x02ac7438, 0x14ce1fea, 0xcfac3afd, 0xcfac3e4c, 0xae76214c,
-	0x9db19668, 0x6fb5f070, 0x960fbe51, 0x82891e2e, 0x47be0df5, 0x9d433670,
-	0x8f73aeca, 0x15a41bff, 0xfdec7697, 0x2dff4857, 0xe113b3ca, 0x75cbba7a,
-	0x5ba803c6, 0x39336d6b, 0xc160deb9, 0xef7838eb, 0xb13691b7, 0x9d1d7e67,
-	0x4dfb9ee7, 0x2726a62e, 0x07099fea, 0xa11fd225, 0xc3b0e9f3, 0x3d5287c4,
-	0x2c3b3bb2, 0xb0104fa2, 0x70f791fe, 0x164c137e, 0xbaf684bf, 0xb065ff49,
-	0xc48e617e, 0x935773e8, 0x83df614a, 0x938b1091, 0xd1747d47, 0x38eb7642,
-	0x3a550f85, 0xdb9b2b7b, 0x72296f8f, 0x73338555, 0xaf582cc8, 0xd66cf0a8,
-	0x1022faab, 0xf87b32ce, 0xaf529176, 0x932892eb, 0xf46d5e1d, 0xebb2e831,
-	0x33d250e0, 0x3fd9c9fd, 0xf601dda0, 0xf954f2c4, 0x5327845d, 0x0acdeef4,
-	0x2dfd54fc, 0xacdffd29, 0x8b66f1c0, 0x5376e1c8, 0x7a14dc08, 0x1e97a50a,
-	0xdb41887a, 0xeccf1ba3, 0x51a3f6be, 0x6bdf84c9, 0xfd78e61e, 0xedfaf090,
-	0xcd802b5b, 0x4dbfa0d8, 0x0cfefc21, 0xb98bf578, 0xedaf023f, 0x9bf578a1,
-	0x375e2187, 0xa0676489, 0xa376881d, 0xb5c0e507, 0x60f6e794, 0x51392306,
-	0xd7398529, 0x8077e324, 0x87c91643, 0x541f28a3, 0x15c430b9, 0xe9f506b8,
-	0x71e57069, 0x8db1017e, 0x10a4e797, 0xf6b0245d, 0xbc072c78, 0x277da1e7,
-	0x7e668699, 0xe5b7720c, 0xdfdedf01, 0x82cd3f40, 0x983ceb6f, 0x8b66f78f,
-	0x0eb7ed13, 0xc3d5e89f, 0x59a25a3c, 0xbf187ed6, 0x4e55fe65, 0x4533962f,
-	0xf8374c6e, 0xef837ed0, 0xbdf88d49, 0xe97f7f9c, 0x441f67ef, 0x8d33acfb,
-	0xb25abad1, 0x67da3a59, 0xf419652d, 0xdcaab7fd, 0xb7823079, 0xddf4e32f,
-	0x43e6df32, 0xa3e8f43d, 0x27a8e1be, 0xf1cbb65a, 0x510d4836, 0x981cf89e,
-	0xd38920ff, 0x94324b7d, 0x7059ba43, 0x7ec5cf97, 0x0df3e1ae, 0xff3d8794,
-	0x4e657414, 0xe506d105, 0x76231ba7, 0xe9555ca0, 0x2e30f074, 0xcf7887df,
-	0x7938456c, 0x7a8cb027, 0x8543ffe8, 0x0bf854de, 0x008d36c0, 0x3c1098f7,
-	0xa31774a8, 0xca585fc0, 0x413bcfe9, 0xf31d4f59, 0x0091bfa1, 0x38070953,
-	0xf0c11a57, 0xd5967483, 0x6ff38d93, 0x91f80c5e, 0x0f1c1d70, 0xdd5645a7,
-	0x155f07d6, 0x0df128e6, 0xa6f90218, 0xa9be7192, 0x7a42ba44, 0x0aba046c,
-	0x481647a2, 0xae173e88, 0x83ca15d0, 0x1cb8f708, 0xc257e758, 0xf0b1f21f,
-	0xa694ffad, 0xa4ce35f7, 0x1e2f2e1c, 0x734a7b33, 0xd04def48, 0x656f9dd8,
-	0xfa889a7f, 0xafbdf4e5, 0x149a6025, 0xeb8c9ee5, 0xd7fe5cd8, 0x1fff1452,
-	0xb8f407c6, 0xffcb0f8e, 0x2dda224f, 0x235f4b95, 0x79d2bffa, 0x37989996,
-	0x5d1ee01c, 0x00fd382c, 0x462d79bf, 0x16f824e7, 0x0c755c57, 0x6ad659e1,
-	0x56911874, 0x1c8d62d8, 0x408f2b3b, 0xda1d8a37, 0x39ba246a, 0xf4894bf7,
-	0x8b92b9c1, 0x0f800eaf, 0x4e0856e7, 0x32d657ac, 0x3790256c, 0xa816292b,
-	0xa057995e, 0x1ca9657a, 0x051a275f, 0xaf4037a2, 0xde283b25, 0x8ef5a731,
-	0x13df88a9, 0xa40f5fc5, 0x187ac1f8, 0x2e63e547, 0x959e48de, 0x56abf529,
-	0xbb47911b, 0xacb597bf, 0x3ffc88ba, 0xde521bd3, 0xec53e93a, 0x5b51acb7,
-	0x8235c6ee, 0x4e57771d, 0x07ca0c44, 0xefce64e6, 0x40f24811, 0x93fa0ff2,
-	0x447140bb, 0xc20f30cf, 0x61bc89c3, 0x99eba47a, 0xdba05708, 0xdd7ca5e8,
-	0xbe0aa733, 0x99ceb049, 0x1f67ce16, 0xfbbe0996, 0x09ff3e05, 0x5065ef40,
-	0x5d740b1e, 0x38e4c316, 0xe626dd48, 0x2e79c70f, 0xca09f61d, 0xd438d3db,
-	0x8fefaa28, 0xf75ca1b4, 0xb78911e8, 0xe5a52f32, 0xede947cc, 0x98f34fcc,
-	0x74933ac1, 0xfc93af90, 0xf38e312b, 0x0367b32b, 0x8b5fd7d2, 0xe0169c4e,
-	0x4239ddfb, 0x439428de, 0xdd68038d, 0x701f5b97, 0x067680a5, 0x5fac41aa,
-	0x147ee396, 0x4ccab3fb, 0x74ab718f, 0x995a8e95, 0x17d61537, 0x9be2debb,
-	0x6b8beb04, 0xf5c21cf5, 0x38374fa6, 0x1383ef10, 0x74133af8, 0x543f9fdc,
-	0x81a3606e, 0x183f360e, 0xdb3a43e6, 0xda2035bc, 0x03e6fea1, 0x97cc0180,
-	0xf0bc14af, 0x4e61eadd, 0x7559d38c, 0xfeed111e, 0x188f56a2, 0xe1a7e208,
-	0x394441b2, 0x23d3be91, 0x5ab49ea2, 0x353d53d7, 0x4fd4ac5f, 0x59067937,
-	0x4e9e4ec9, 0xa15c33f4, 0xd49fb51f, 0x045f8356, 0x4ac917b8, 0x57b7997d,
-	0x9e8a61fb, 0x3961db56, 0xab7a67d2, 0x453f4fa3, 0x3f505b4d, 0x08f88f83,
-	0x7bd205c6, 0xfd711fca, 0x1bf084da, 0x36abf378, 0x2103374c, 0x9d1c71f8,
-	0x79e34cc7, 0x15d33cf8, 0xbfbf87da, 0x63e38f7f, 0xb9bbf01e, 0xe422fef5,
-	0x1f00cda3, 0x9de6f3c4, 0xcfd4ccb3, 0x799a59f4, 0xf286a931, 0x4b070825,
-	0xa23c75ef, 0xd53d2fcc, 0xbd695a23, 0xe76843ce, 0xe28ccba5, 0x763f6a01,
-	0xf405741d, 0x857a776a, 0x90cbcc7a, 0x47b8945a, 0x4eb38e3a, 0x5d31ff40,
-	0x6b4957c1, 0xf63361fd, 0x5f1466e3, 0xfe85cf4c, 0x8426fea1, 0xfc37a183,
-	0x5e99e742, 0x4273e7cc, 0xf18edfa9, 0xe76c7494, 0x74431158, 0xd5d7e7c5,
-	0x1c6214ea, 0xa08fb197, 0x7e90c9fd, 0x0cb8c29e, 0x7e4ecfa4, 0xb42e4a6d,
-	0x97d1fe7f, 0x52d0b476, 0x0fb33e0e, 0xf5ab56e5, 0x9c709be6, 0xff9f2283,
-	0x5de2724d, 0x206ddf98, 0x53be9a3d, 0x7944db4e, 0xebfd1393, 0x55df56ae,
-	0x2cbd422f, 0xeb64c618, 0x0a138f3d, 0x3a15da9c, 0xcb793938, 0x53ef5c20,
-	0x582c7745, 0x5f87ed02, 0x3b8d38f7, 0x94fcca7c, 0x9b0fc816, 0x30abcbf8,
-	0xc78e5f7f, 0xfee4023c, 0xde5fd2b0, 0x6ae50fb6, 0x821cfce9, 0x4576c597,
-	0xda39a9f2, 0xbf02f5e3, 0x52dc4737, 0xd2b8fc8e, 0x24487066, 0xfa19eb77,
-	0x7711cd59, 0xe5bfb1db, 0x4c26f9d1, 0x36bfd60d, 0x6e3c9ca1, 0x1e2131c9,
-	0x18132d9a, 0x0aaceb96, 0x4f1bbe9e, 0x885240fa, 0x73847772, 0xe5744cba,
-	0x0c272864, 0xbcad0609, 0x2f7971d6, 0xb43e1dd9, 0xf5acba9f, 0x60cc8148,
-	0x7ca05409, 0x69795493, 0x3c717a71, 0xa3b4e2c9, 0x9142b4bf, 0xaf862c37,
-	0xf73960d3, 0x5eaf389f, 0x962e63fd, 0x867f4b50, 0x4128ccb0, 0x9bda3ff9,
-	0x573e10c6, 0xbbc58353, 0x6844f518, 0x70205d7f, 0x4fa38e50, 0x7e337647,
-	0x5eddee48, 0x7a341bb2, 0x7a5e5ba4, 0xf221f5a2, 0x7a811e52, 0x792058a2,
-	0x0ceb61e9, 0x0c12feb8, 0x3c5c00b2, 0x545eb8db, 0xce267bf9, 0x49e5f005,
-	0x5e5c9165, 0x2673e4e9, 0xd1efc60e, 0x452a5cae, 0x5e021e22, 0xc3e9e0c9,
-	0x9378f79f, 0x9d1e507f, 0xa987fa41, 0x21fe9007, 0x0fe144fd, 0x6f078a8f,
-	0x50a3f5d9, 0xd912cb5f, 0x85cb9503, 0xe2cfb436, 0x6947d1bc, 0x2edcc5be,
-	0xa6bf9768, 0x892a1cf5, 0x7979444b, 0xc799d962, 0xbebd41ef, 0xfff49c29,
-	0x5667a5a4, 0xa66e3c60, 0x211a7057, 0x7d1a59ef, 0x6f987bf7, 0x905d3a34,
-	0x81f0ab3f, 0x914597fb, 0xb8084f68, 0x759e8cce, 0x83321656, 0xf139e29b,
-	0x3b409633, 0x34e0a34f, 0xa1e07a3b, 0xef527ac7, 0x37bc05f5, 0xfad0fe46,
-	0xa8d7bc3f, 0x3e7759c8, 0xc6a2d9ca, 0x700a87e4, 0x7cf5eb5d, 0xd7d18d9e,
-	0x3927de53, 0x1cb97639, 0x3fd8a99e, 0x57b3a59e, 0xc0f7c3c6, 0xcef9416a,
-	0xc8a956f1, 0x88e340e5, 0x0d3f1863, 0x3e48172c, 0xa252bc79, 0x5ccdda1f,
-	0xef784d9e, 0x5d900a28, 0xb43de5d8, 0x722b5a92, 0x3674a3de, 0x94588c17,
-	0xe3dfa76f, 0xfe479ffe, 0x9bb62563, 0x83b5a2d3, 0x0cfd0226, 0x67bcb840,
-	0xf1e9fd26, 0xefbad196, 0xea6945f0, 0xd38ead55, 0x8bab3de4, 0xe7b0c7ae,
-	0x52277bac, 0x3992af3c, 0x2ade9122, 0xc1376e65, 0xe61b259f, 0x4f9d5733,
-	0x2ac7b731, 0xa27ec18b, 0xb07b5aef, 0x3389fec7, 0x78a8df20, 0x3a13f154,
-	0x19765eef, 0xacd076e3, 0xdd7ada75, 0x16301076, 0xe5caba8a, 0x32bf76da,
-	0xb9459fbb, 0xe038dee8, 0xaeabf21b, 0x80821e50, 0x266e7f21, 0xa61f71e3,
-	0xced543e8, 0x517a592f, 0x6668728f, 0xc23d45e3, 0x1fd2e673, 0x385fa7e6,
-	0xa1bef3b5, 0x3ebb4a20, 0xbf934e39, 0x534435d1, 0x30f766ff, 0xa75bf7cd,
-	0x5ef9ab5f, 0xc9a919ee, 0x5e3d5edf, 0xfd467f53, 0x7a1cad24, 0xa3d69a37,
-	0x79bfa7e2, 0xa3e8a5bf, 0x12ec4277, 0xe23a9d35, 0xbf91133f, 0xe4672c3f,
-	0x33787cbf, 0x1d31f8d3, 0xe7822423, 0xf93d5c80, 0xc8e5f731, 0xbf208fef,
-	0xa1f44fc9, 0x7343f3c2, 0xa228c9a1, 0x7ee4627f, 0x725fa879, 0x5e503990,
-	0xfdb1d4ce, 0xff8f5442, 0x9cf30e67, 0xe3bafec7, 0xf10f4b0d, 0x1f884378,
-	0xff78a573, 0xbfcc0670, 0x4d79790f, 0x16c3f72e, 0xffaf36ee, 0xb58e0838,
-	0xfc9ad16d, 0xebf1fda2, 0x3bd60e3f, 0xae1d044b, 0x93e146b3, 0x7da0165a,
-	0xa0e8bb52, 0x40c4eafe, 0x583be62c, 0xf4b46c67, 0x0a8b838f, 0x258f800f,
-	0xa9de2837, 0x193fc3fa, 0x9e0a453e, 0x1a70b4cb, 0x90e3cb93, 0x29108f5f,
-	0xc7239cdd, 0xf103fee7, 0xf49eb41c, 0xdc7fbcdc, 0xc847227a, 0x9f9f0859,
-	0xe3dfaf1b, 0x17940f1e, 0x7f0b908e, 0xfe4cb826, 0x47a5c247, 0xd82f47cf,
-	0x72a3fa0d, 0xfdfb819d, 0xbf5c33de, 0xfefd7237, 0xf68fb47c, 0x44f39b87,
-	0xed070ee7, 0xe93ed297, 0x618d7ba1, 0x59df1819, 0x797d23a1, 0x8190997a,
-	0x2126c2fe, 0x0f36fc8c, 0xc81648ab, 0xc878b9be, 0xaa31fd48, 0x3afded07,
-	0x0551f390, 0xe4096b3e, 0x71e5ccdf, 0x716e35b1, 0xf5038a4a, 0x1eac1ff6,
-	0xe27a8b8a, 0xfd9e1e11, 0x696be130, 0x2bee45df, 0x6bd0127e, 0x8512d1e5,
-	0xd5cc5f8f, 0x2e1f3ad1, 0x949db914, 0x1f70ba2a, 0xa9d81563, 0x96065768,
-	0x915f28eb, 0x6d59e9c7, 0x9d0a1ff7, 0x14dd94c7, 0xda88f386, 0x7d7dba24,
-	0x2e51fb8c, 0x793d0f8f, 0xb3ed1857, 0x68742a01, 0xd6bddbef, 0xaf582e69,
-	0x8d96d0bd, 0xdcdadfb6, 0x4d6fea68, 0xcf159746, 0x748cfca1, 0xfe8eca78,
-	0x8cfac0a0, 0xe655cd33, 0x580feeab, 0xe936fe94, 0x9da2bf41, 0x1e289822,
-	0xf91af161, 0xb16715f9, 0x1ccade26, 0xa76e0b02, 0xf428f3d6, 0x1b42c76a,
-	0xeff697e1, 0x5db178d5, 0x1ba417a1, 0xcf4abbc4, 0x8983fda1, 0xe9cc8dec,
-	0x15d9f389, 0xe51a8e52, 0x8f748dd9, 0x1f90eafd, 0x07fe5cbc, 0xe3c4be6e,
-	0xded7de2c, 0xe18879c3, 0x0c9c525f, 0x5fce4aec, 0xbee2434b, 0x024f913f,
-	0x40cf0e66, 0xde1e5684, 0xdac9d0ab, 0x48de827f, 0x3ebc02ba, 0x8fe5cb9c,
-	0x36fdc0ab, 0xb2c73bca, 0xfba230d4, 0x96270b1f, 0x51384560, 0x3872ba5e,
-	0x1f3df379, 0xcc749e10, 0x7f71b46f, 0x72e1f90b, 0x31c2a47c, 0xbe9e6449,
-	0x3c88f2f4, 0xca1bfbe5, 0x6ab7ae7e, 0x61d90fc8, 0x02c57728, 0xcc2cd2c6,
-	0xffb6bc61, 0x8f9c0e7a, 0x396ae885, 0x96aee5d2, 0xcfe43094, 0xcabc6564,
-	0x0ca7d29b, 0x205fa077, 0x040ed018, 0xe3c0c3bf, 0x574edc3f, 0xb94f7ae5,
-	0x72c47ed6, 0x1f8f664f, 0xeaf7daa6, 0x82973c77, 0x59f3aae3, 0xfd61d8a5,
-	0x125577cd, 0xdca2724b, 0x808f765a, 0x5ab1dcf0, 0x717df8d4, 0x0325615e,
-	0x7fce3e3f, 0x8efd13af, 0xcdafb038, 0xf575cf28, 0x5e083382, 0x0a817b81,
-	0xf8871338, 0xe24fe02b, 0x8967bd3a, 0x57c7425e, 0x85abb1d7, 0x5de71b8f,
-	0x9f90c82c, 0xa02f5154, 0x9956b7df, 0xa3055c7f, 0x3e9969ef, 0x9e21e301,
-	0xe38a5616, 0x03335655, 0x332af5c6, 0xf2865399, 0x7443c6ca, 0x02b9edde,
-	0x206f2539, 0x4f3a4fc9, 0xa4f02ae3, 0x4d1d01e7, 0x7643284d, 0x864bb867,
-	0x167f89f1, 0x4cb5a71d, 0x59efa2f0, 0x843ce2d4, 0x11d001fe, 0x2d3c7dc5,
-	0xe75f1a01, 0x5d7271e5, 0x80e9c18b, 0x658d4875, 0x5521ffb4, 0xd4329c1b,
-	0xdf29b63b, 0x2d95f18f, 0x0ddfdc8d, 0xd67493f5, 0xd1c3d7fa, 0x9910ab5f,
-	0x790a0144, 0x5659fa2a, 0x30562e85, 0xf7ee3b77, 0x41fe1933, 0xdca548bb,
-	0x2a6f3d5a, 0xd0e52266, 0x13dc8378, 0x6b9e409f, 0xd3b240dc, 0x678daa94,
-	0xc92b2d48, 0x7d6233af, 0x890faca8, 0xa5d54877, 0xac971714, 0xf35bf2da,
-	0x8e086222, 0x9e1e3c59, 0x8d88ef73, 0x727cc2b7, 0x1fe3797f, 0x41873d30,
-	0xfe5b8033, 0x4c073bb2, 0xac16ff87, 0xa62378d8, 0xe8cebc4f, 0xe08fc19c,
-	0xfa8c6657, 0xe8fafcf1, 0xb2abf295, 0xb9d00f26, 0xd27dafc2, 0x094f1abf,
-	0xfe954fe5, 0x4d4ef943, 0x7f865ed7, 0x120526d7, 0xdf4f0f91, 0xdb03323b,
-	0x73de3657, 0x5f88c7c8, 0x77d00705, 0x117177a5, 0x5660ba23, 0x5e5bd097,
-	0x490b3784, 0x1f37bfec, 0x3b7c863f, 0x13e7effe, 0x95df087f, 0x63ce8c09,
-	0xf649fd81, 0xdfaa9a9c, 0x3eb9f223, 0x246790bd, 0xc1464ebc, 0x053bac0a,
-	0xc7bee0da, 0x2b4e6078, 0xf02e7fa4, 0x4de38b3c, 0xef9e3c81, 0x6b40fd7b,
-	0x4b37ae0c, 0xa78ef5c7, 0x76e68edb, 0xa8ffb748, 0x06590fd8, 0xdced0536,
-	0x771126c0, 0xc0e0596e, 0xe2d63be7, 0xc9b96bbe, 0xcaeb0699, 0xf448dfba,
-	0xf68a0484, 0xa7689651, 0xb6aee5b8, 0x9f69cb8f, 0xd2c0d1b1, 0x0ee06e28,
-	0x006473c3, 0x4caab0cf, 0xacc357b2, 0x857aaf68, 0x1e88aaa4, 0x22f5087b,
-	0xef2cb40a, 0x30ac53ad, 0xb042aefe, 0xec7b3347, 0x59fed51c, 0xeb4c9f9c,
-	0x6820ed57, 0x8fddb0c7, 0x0b4aa7e5, 0x19bb224b, 0xf7fb83e6, 0x90264cb6,
-	0xff5213ed, 0xd92332f4, 0x7baf76af, 0x5bb470ca, 0xa0e6a797, 0x9ae30add,
-	0xfd7f6e24, 0xbb67ca3b, 0x285ef94e, 0x49b9e0e6, 0x05801f75, 0x8718d174,
-	0xfeaaed53, 0xe763a5e7, 0x9505b954, 0x9f2f9b7f, 0x59ff7ec1, 0x5563dd72,
-	0x634d4de8, 0xe9e079f8, 0xcf8dbd0a, 0x9e9a5337, 0x73dbb3ff, 0xfe93aea7,
-	0x39feeb79, 0x9ffae1d7, 0xffd88eb1, 0x3cd8f821, 0x3ac67ff9, 0x4ff2996e,
-	0x5f37875c, 0x43cfc86e, 0xe746d679, 0x7e2eec88, 0xdee41c2e, 0xcb9cbc3d,
-	0x09938b39, 0x74ffc764, 0xfd84d779, 0x1c1f419d, 0x7778a1cf, 0x67183a08,
-	0x88a1a588, 0x8ca5cdec, 0x2c8681f6, 0x4340fbe5, 0x224d3a96, 0x6e1603da,
-	0xec520e27, 0xb94b41ce, 0x9ca719dd, 0x118b882b, 0x3fd4327d, 0xca5bcbf6,
-	0xbee0c6e7, 0xd5ec9190, 0xf5dd36e6, 0x5e53d416, 0x868fce89, 0xd2d289da,
-	0x5f9c4a95, 0xf6aa9f6b, 0x79e31a68, 0xb4b3b2fd, 0xa3daa74f, 0xb4f29443,
-	0x603f7ca5, 0x1ed68b48, 0xdad6ab8d, 0x1082fa8f, 0xbaa9733b, 0xeb49d07f,
-	0xe9d72dd3, 0xa87ffcf1, 0xb07b89dd, 0xab0714a8, 0xfeb4067a, 0xf630d74d,
-	0xf9f77e74, 0x1fdc1c8c, 0xd05ab99a, 0xcf5539e8, 0x7e282402, 0x43e3e2a4,
-	0x3f8873d4, 0x5fb534f7, 0xaf3e6fd2, 0x2e4c7048, 0x539cd74f, 0x1e7eec62,
-	0x3a73712f, 0x11eaf5fa, 0xddaed16b, 0x37c6eeb7, 0xfd697d31, 0x04e5e19d,
-	0x6f54f5af, 0xebc6cb7f, 0x7650ff30, 0xe6123dbb, 0x53a8d0f5, 0xefd009ef,
-	0x85e33c6a, 0x2978b3eb, 0x9e14b68f, 0x7ab3d08b, 0xa4dbdfda, 0x0d9f4c0f,
-	0x45122be5, 0x23be911c, 0x1832981d, 0x59309f9d, 0x35f57e78, 0x30e3ee8c,
-	0x1a9f5ce5, 0xd73d0987, 0xc7c3cab7, 0xc4f00559, 0x18963573, 0x39a91f7e,
-	0x08e9fee1, 0x818766ef, 0x8b3939e1, 0x624fee72, 0xa82aaed5, 0xbf7edc77,
-	0x0bee167d, 0x7e881867, 0x26ce98a4, 0x9ed993c4, 0x71c2af63, 0xcd35e242,
-	0x2037e929, 0xfbb5bc59, 0x20679ef0, 0xc9cf7b7d, 0x2a9d312f, 0xf3c3efb5,
-	0x88465225, 0xbf6bd29f, 0x9bdc1198, 0x4a5f3387, 0x6e3b9632, 0x754e9110,
-	0x869a6feb, 0x50c154fe, 0x4f581ae7, 0x1bf30258, 0xbd611e60, 0x7b7989f6,
-	0xce9c20a9, 0xf59648d5, 0xdfd80d15, 0x7fba08a8, 0xae03bec0, 0x4df3a7cb,
-	0x80f657f4, 0x0e3a47a8, 0xc38ff653, 0x1fed7b32, 0x30c2fcd3, 0x3b59e14d,
-	0x7a15c3e4, 0xca7b635f, 0x6b77fb87, 0x106e5213, 0x69f53d1d, 0xbbd6195f,
-	0xab1bbbf2, 0x26fd5f68, 0x9fcf1593, 0xcafb2985, 0xa574e3a1, 0x43675b3a,
-	0x6418b46a, 0x55f11673, 0xe0725f0f, 0xe68353d8, 0x9cfaf501, 0x736e3aa7,
-	0xda83c71e, 0x64c2d19f, 0xf74323b4, 0x81fb43ad, 0x56be7079, 0x31fda9ea,
-	0x01e746d6, 0x518b8874, 0xa7abb57d, 0xe9df0db9, 0xff1fbb24, 0xcc82e382,
-	0x35fc431a, 0xcedb55ac, 0x0dcfca9c, 0x2a18f4a8, 0xfdd0a52f, 0x6f7ad4f7,
-	0x9f81e138, 0x1fad0827, 0xf6d0d70a, 0x5833b7f0, 0xe160ddde, 0xa95d88fb,
-	0xac22b99d, 0x473da57b, 0xbf5a7f33, 0xef7fd3d0, 0xbe6d3cfd, 0xb9f6364c,
-	0x7d07943e, 0x4e8277cd, 0x6c596fbb, 0x8d2fb6d1, 0x25777ed1, 0x4592f368,
-	0x6d91dfe9, 0x8e1af3a2, 0xf79e137c, 0x18d8f953, 0x8af7efe2, 0x2efa2adf,
-	0x1e74c991, 0x79de9375, 0xe3c4e50e, 0x01d24033, 0xf82c3c7d, 0x552e58cc,
-	0x0f515bb4, 0x93d3adc6, 0xaefc7a9c, 0xbde0ce5b, 0x6ba016a0, 0xf771e584,
-	0xc56e9b47, 0xf148b17c, 0x70fb9b0d, 0xcb51d239, 0x37bf5f77, 0x3a9fcf1b,
-	0x5bce740d, 0x75b1b73d, 0x1e2b61ac, 0x94cb8a0b, 0xfdf069cd, 0x84e62aa1,
-	0x6323b099, 0xfc712363, 0x15a2d12d, 0xd1f3ddf5, 0x718efff5, 0x8c19e694,
-	0xe14219f6, 0x46d23757, 0x756e3672, 0x5bf780b6, 0x5f9b1e1e, 0x06317289,
-	0xaf9465fc, 0xc57dca90, 0xf015c717, 0xc5b6c0f8, 0xbe23c52f, 0xdb0f5837,
-	0xa2159e69, 0x52d8a713, 0x8b7fe5c1, 0x7b3ed185, 0x3752a8f3, 0x72ec4d1e,
-	0x8b3c0ec9, 0x41dee2d8, 0x2d595ef3, 0x9cacd972, 0xc8580197, 0xbe9c3951,
-	0xfd4a360c, 0xb3346e98, 0x972839f8, 0x7ce8c292, 0x81f67f50, 0x57cb84b4,
-	0xe9cc6f6c, 0x1143debf, 0x5cc8f18d, 0x9fe467cb, 0x6dfd0b9f, 0xf299b19d,
-	0x538d3caa, 0xdfbbbbe8, 0x1bba3d10, 0x36724bf0, 0x9e2ce41a, 0x878e63c7,
-	0xf575b789, 0x3a20b4c2, 0x7c8055d5, 0x2ee7e2cd, 0xbebb7e30, 0x87e334a8,
-	0x9b9d4cfc, 0x5518e5cb, 0x97ebbb1e, 0xda05dc61, 0x635f51fb, 0x0fce783f,
-	0xb7d71952, 0x443fa851, 0x830cf37e, 0xe839ef03, 0x430e402a, 0x56825d7b,
-	0xc9181c4f, 0xc1fb35f1, 0xa09eccbb, 0x728c4d38, 0xbea3661e, 0xeb069cde,
-	0x744338d9, 0x6c78076e, 0xfa1068a9, 0x55c4c78a, 0x0d997e70, 0xde6fd1f5,
-	0x1b139152, 0x8c669ebc, 0x36d0c073, 0xdb9f0fd7, 0xbfc885d3, 0xbc79235d,
-	0x1cdd67bd, 0x3f4071be, 0x479a87a8, 0x6ae6ae97, 0x557241da, 0x6d6de567,
-	0x073a7aae, 0xcfc155d9, 0xf813ad5d, 0xc4a4827e, 0xf28b9bcb, 0x4bf4bf49,
-	0x492b152f, 0x57e2849f, 0xe5fd3f9d, 0x9911e907, 0x8719f1f1, 0x4cceb49b,
-	0xda07e1fa, 0x4af9743b, 0x1e0bd47d, 0x62ba7f6d, 0xf8e33651, 0xaf105fa8,
-	0x7bc5e63a, 0x95fda193, 0x3a16fc2a, 0xe069c91f, 0x8d9db1ed, 0xdbf48bf8,
-	0xc8e00169, 0xa1ce82e9, 0x3c38f7b3, 0x7c3a24b7, 0x2e01f86b, 0xae7487d2,
-	0x78f7a52b, 0x658e098f, 0x7de8efb8, 0xe7f3a25d, 0xcd4f7aa1, 0xb13070ab,
-	0x3e9ce736, 0x0f9c4dec, 0xa76935ea, 0x01fa89d7, 0xed8a97d0, 0x094b2a36,
-	0x5cd4b3bb, 0xd7ade8e0, 0xab6d5cba, 0x937282af, 0x03f69983, 0x99534c3c,
-	0x79c0307f, 0x1ccf33ed, 0x3df58abf, 0xf803ae0e, 0xe6bce099, 0xe63347f9,
-	0xedf37b40, 0xb9b426ad, 0xf5a1cf43, 0x76a4ef6e, 0x4cab4b71, 0x23c519d3,
-	0x86b95465, 0xafd90b08, 0xe48674cc, 0xc6c934b3, 0x3d10a7ed, 0x50f80eb9,
-	0x644af08f, 0x38d0af04, 0x49f8e871, 0xdefcc905, 0x1a52e2e4, 0xa7454377,
-	0x5d90e31e, 0x4ec57aae, 0xefa9f4f2, 0x7bb1fb42, 0xff23a73a, 0xc81a1577,
-	0xc1f87e1e, 0xcf119349, 0xc51265de, 0x7bd17ad1, 0x233dbac8, 0x1cae9cf5,
-	0x7f28cd8b, 0xdbb9ccb7, 0xfec3e8ec, 0x8b3152d8, 0x965a2fce, 0xa5633b70,
-	0x88e481bd, 0xe7b942a5, 0x71cbd8a2, 0xa213bfaa, 0x3754b727, 0x9bdef198,
-	0x8590de7a, 0xed97dbd8, 0xbbbd1fbf, 0xf18bf961, 0x2aee4fa8, 0x79c78869,
-	0x4ff0896f, 0xd5df1377, 0xf2029f93, 0xf1e51e38, 0x920e91a2, 0x7ff2dd2f,
-	0x0e3b39c6, 0x5569181e, 0x43db8af8, 0x417fe25f, 0x928d66bf, 0x1c6014a7,
-	0x8e44b52d, 0x74bc6076, 0x00d3bbdf, 0x7abd93ae, 0xfb8d63f2, 0x2fc1f481,
-	0x49382632, 0x681e9e5f, 0xac9d22b0, 0x8f46fc6a, 0xe2ce6bf7, 0x7fe855e9,
-	0x87b70255, 0x9818c556, 0xa1f342df, 0x2e754f45, 0xf5a7a866, 0x0137dc09,
-	0x798fc5bf, 0xfd102316, 0xbaf18e4c, 0x298700ad, 0x30bbbe31, 0xd7ac4aad,
-	0x129c60d9, 0xf080b447, 0xc563a29d, 0x9daf1e06, 0x115cf385, 0x59c511f3,
-	0xd1c5a727, 0xc5a3547d, 0xc9fbc3ad, 0xf6d5677a, 0x8bce8cb5, 0xb015bc51,
-	0x8ce1f74a, 0xb6bdc718, 0xeeab8e27, 0xdcf1a913, 0x04290575, 0xffc1212f,
-	0xcb23e22d, 0x1ef1101a, 0x403e987e, 0x46aaf8f6, 0xcd41f913, 0x91da3b09,
-	0xf823323d, 0x3e7aa43e, 0xb163e017, 0x0c567c02, 0x95d69bbc, 0x17bb1494,
-	0x91faa5e7, 0x50af20f1, 0xcc2565de, 0x4beb8a9b, 0x4aedc37a, 0x0cc67a86,
-	0x1660365d, 0xa2b9eae0, 0xc61eac78, 0xd8583c21, 0xabfb4c38, 0x40d122bf,
-	0xf2d0d8f1, 0x5c780b27, 0x21050b32, 0x135eebae, 0x755dcfdd, 0xaaf7bee0,
-	0x301e7e50, 0x6767c939, 0xffbc1481, 0x66771dde, 0xaeddff7c, 0xdbb5bf9c,
-	0xa63f740d, 0xf8ccbe3b, 0xe71abcbe, 0xd9e51a88, 0x31f2788c, 0xc7f421c7,
-	0x8f71abfe, 0x4fca461b, 0x6dac7f60, 0x63c515c0, 0x68eac6c2, 0x8529279f,
-	0x05f78279, 0x5feb2956, 0x7a870dd5, 0x75f5ea3b, 0xf6079428, 0x378d870f,
-	0x2226bbe7, 0x88ec46dd, 0x47dafd47, 0x171343bc, 0x79287bc1, 0xfa6204b1,
-	0x9c79aa93, 0x3cea6624, 0x5348778a, 0x0ad93ef9, 0xdcfc6016, 0x7c84c0a0,
-	0xfd4beaba, 0xe887700d, 0x927accd7, 0x90ae9193, 0x7f2f48b8, 0x6576e645,
-	0xa2dbdc88, 0x02f1f9f0, 0xcf91ee25, 0x93e7bff2, 0x5228bb25, 0x1889f7d9,
-	0xe8724295, 0xd90a5711, 0x411cc443, 0x9d9cbef0, 0x87b15073, 0x8f9ca77e,
-	0x83e72bf7, 0x83e72b0f, 0x0b77c55f, 0x863f90c0, 0x7a4016ef, 0xe549c9bc,
-	0x2815346f, 0x6fe399ca, 0x4892ee45, 0xf9941fb2, 0xadf994e9, 0x25734eb0,
-	0x6d567e03, 0x5879d3d3, 0xe984c263, 0xaf32cf68, 0xdb119edc, 0x7587ef73,
-	0x9efcbfc2, 0x095da773, 0x3a4f3a1e, 0x3ff7cac7, 0x542d7c55, 0xb612afea,
-	0xc75f9019, 0x36e16a76, 0xc6a452fe, 0xda622cae, 0x4d1397f3, 0x4bf53443,
-	0x97f3daac, 0x6ad7ec93, 0x68764fbe, 0x975e5fcf, 0x1f643e31, 0x0b574b56,
-	0x806e8013, 0x7d33aa4e, 0xd685ff34, 0xcd7b8a52, 0x74c7b90d, 0x3f36ab47,
-	0x2fcda7df, 0xabcdaddc, 0x46c3c9e7, 0x9230f429, 0xf131fc8d, 0x0cf7e44e,
-	0x0107ef85, 0x3ab36fbf, 0xcfda1199, 0xf8bf7816, 0x1b00c61e, 0x76c94bed,
-	0xe3ac238c, 0x5cb09ff7, 0xc3bdcbc7, 0xbe7af695, 0xdb8ec56f, 0x4b1dbee8,
-	0x06ede1cc, 0xfc7eeff0, 0x72f1a48e, 0xfe87af0e, 0xa21bd612, 0xe5c353f4,
-	0xfe459c93, 0x33ec9b82, 0x62b36b23, 0xc2fe016a, 0xe9399a34, 0xab0c759e,
-	0x9075bf27, 0x51327f72, 0x43bca4e8, 0x3e6186b0, 0xf0a67045, 0xe48f85f8,
-	0xfe4950c3, 0x89f12a75, 0xf447745b, 0xb90d97e6, 0xaaf007ba, 0x910286f8,
-	0x5623e2e4, 0xd8f9ef46, 0xbf13f75c, 0xb016c36e, 0x8f6b336e, 0xf87a1549,
-	0x61bcede7, 0x5c135fc4, 0xb52fda0e, 0x780b2415, 0x8588a52e, 0x4536cb9c,
-	0xc4a3e869, 0x5f42171a, 0x4be84243, 0x9d7f7f4b, 0x3945d5ec, 0xe842ce90,
-	0xe5be2ff0, 0xaf182c51, 0x05fa8f4c, 0x7689d58f, 0xca9e054a, 0x754f9602,
-	0xee319b46, 0x73d18b67, 0x3fd8a579, 0xab9f4aa5, 0xb2eb59e4, 0x566bfbe1,
-	0xf6e649d1, 0xf13d2dba, 0x96df1825, 0xea35f600, 0x5c919963, 0x1fd3b07d,
-	0x7fd43576, 0x65fffc04, 0xeb1bfd0c, 0x65efbc64, 0x5f10e4b5, 0x7949623f,
-	0xd05ef300, 0x437f58e8, 0xe5aff731, 0xef826ce8, 0x05bea151, 0xc23da5ef,
-	0xc1a94cf2, 0xfebc2df5, 0x5164597a, 0x31189f90, 0x9dbfea82, 0xcef86667,
-	0xd9a07781, 0x63ec7187, 0xdd77acf2, 0x7b7feb41, 0xaf07d714, 0xa8f11c19,
-	0x7c991e0f, 0xd287a677, 0x685f8d74, 0xbee4104b, 0x8f8517ce, 0x92bd7236,
-	0x78c7e25b, 0x34c2747c, 0xfd039957, 0xe90bb71d, 0xf112e742, 0xfd375be8,
-	0xa87e2b44, 0x0fc106e4, 0x5d749b4b, 0xe3ff430e, 0x35770b11, 0xd59e291e,
-	0x02f98652, 0xd903ee91, 0xd9ebe25c, 0x7e02aeb8, 0xe54af0fe, 0x181ea871,
-	0xbfdb9a32, 0x3c448693, 0xdffa1430, 0xb15a2450, 0x2b7a0dff, 0x4ef1e7dd,
-	0x1757e466, 0xe097eabb, 0x11096dbc, 0xda6fcf0c, 0xbe781a0a, 0x00ccc0d8,
-	0xbd6b934f, 0x4a69f117, 0xf6c08cf5, 0x7a7e0747, 0x5b19ed1c, 0x703a4882,
-	0xaef9cba2, 0x2817eb1b, 0x79e29df1, 0x9b3c70eb, 0x599ab445, 0xb9541c0f,
-	0xcbc99ebe, 0x0ab2ffc9, 0x0accdef4, 0xce0d436b, 0x708491e7, 0xae6df3b2,
-	0x79e20b06, 0xd13d40c3, 0x7f224941, 0xc2556a57, 0xffcc0ab4, 0x7191a062,
-	0x1f2ff3be, 0x5381fe8a, 0x5b3575a0, 0xc75e681a, 0xc139892e, 0xa9a896ef,
-	0xcf85a1d9, 0xf8f146ef, 0xf1e30990, 0xf5b79f80, 0x8b9a9ccc, 0x78a7a3f4,
-	0x6b7c7f53, 0x7ece5d73, 0x2afe61fb, 0x110b0394, 0xc29785be, 0xfa404f98,
-	0xfe61293d, 0x5b017f77, 0x60d9d680, 0x6e41fec1, 0xbfa2fabb, 0x7e9cd188,
-	0x4b0e0b9b, 0xd7824ef8, 0x341f1021, 0x444e4e5b, 0xb528783e, 0xa1e8e88c,
-	0x899a8f82, 0xfcf3862f, 0xeef779db, 0x137a3c41, 0xe77f69c3, 0x315982a1,
-	0x60bef4c1, 0x32f44894, 0x4e616fee, 0x9463e23f, 0x91fbf881, 0x8c56c708,
-	0xccf3794f, 0x824bbf64, 0x986cd975, 0x2862c4e7, 0x5da2fe87, 0x7ef13e62,
-	0x0b8f0575, 0xd57e302b, 0xf8843b65, 0x31664a90, 0x3949ae7e, 0xef9114f7,
-	0xb435435c, 0x25956ffa, 0xd8cfde97, 0x4270d092, 0xbb20b6d9, 0x5722906a,
-	0x45889406, 0x5906df28, 0xeb655db8, 0xbb940594, 0xaa47fba1, 0xed29d7be,
-	0xa65b328c, 0x371b54a3, 0x7d7015d2, 0xe97f6a1b, 0xc35edc2c, 0xae8fbc3f,
-	0x893f35cf, 0x317438e7, 0x197f7ada, 0x0a739ca5, 0x3a54afb1, 0x7ae560df,
-	0xd1ae4362, 0xa1bd7487, 0x2a59db98, 0x47f2ab1f, 0x872abf85, 0xef7e7bd4,
-	0x5195f628, 0x87365e4e, 0xe599eae4, 0xd4076f78, 0xc317739e, 0xfa56897b,
-	0x1f72aefe, 0x6f6294f1, 0x5bd8a7bd, 0x5bd8a1ff, 0x05bda3ef, 0x835186f9,
-	0x1437bf08, 0x08dd762e, 0x20901af3, 0x3a14df11, 0xedc44c4e, 0x271971af,
-	0x61d97d2c, 0x0ea2d111, 0x348f05e3, 0x36497bf2, 0x1598ed97, 0x95cf59f1,
-	0x766b2cf9, 0xbcbb3469, 0x7ae3f27c, 0xe43ed1d2, 0xb9557beb, 0x994c794f,
-	0xfe6571ff, 0x57f3286f, 0x43498fed, 0xbca132be, 0xefaf10df, 0xfc297e47,
-	0xb9d0a729, 0xb57950a8, 0xe908c401, 0xfc9122eb, 0xe778209f, 0x25bde46a,
-	0x4ef5f720, 0x1e68c959, 0x7660dbbf, 0x7c462c57, 0xa714664e, 0x27aae89d,
-	0xb90365b9, 0xf8b37245, 0xca6ceb5c, 0xe5833847, 0x6381519e, 0x8e5acbb1,
-	0x4638be72, 0x24571f4f, 0x5bbdd0a4, 0x1d0efed5, 0x0cf072f7, 0x82a66795,
-	0xf3e25ef5, 0x6c7247ff, 0x8ee3e32c, 0xfd3a24bd, 0x4f1cde5c, 0x91237926,
-	0x5fed0a7c, 0x636f3795, 0xbe2064cc, 0xfba1644f, 0x610a7700, 0x9de7844e,
-	0x3f307c28, 0xff7dd197, 0x673d8ac1, 0x01d1de57, 0xceb8a14e, 0xf5b04ed8,
-	0xfc7af883, 0x1bf75325, 0x8f8edc6c, 0x9a27e4d6, 0x4bf535e2, 0xef9ac9ac,
-	0x35c3ec93, 0xb23b27df, 0x32ebf935, 0xffea6946, 0xc9a459c2, 0x593050df,
-	0x2e4cbf53, 0x6665e4d3, 0x0e4877a5, 0xfa1eed36, 0xa7fd1eb1, 0xa71fa1b6,
-	0xa14f86f5, 0x0e0bf0f1, 0xa3b5e160, 0x00e8678b, 0x87518546, 0xfc864cef,
-	0x6793d1c6, 0x0aef80e8, 0x3afe1f07, 0xd3685819, 0x7f3c29e8, 0x53afe1f5,
-	0xf465bf20, 0x863f3c75, 0x3adcf091, 0x2f0cea7a, 0xea1c59e0, 0xd0347479,
-	0xea972df1, 0xf83da28f, 0xe6d365c7, 0x4ef84b26, 0x06625940, 0x8a6ce7cc,
-	0x7efc61e7, 0x15acec73, 0xfc761178, 0x8f74f577, 0x79a337ed, 0xfc8b8ebb,
-	0x8b8e8d5d, 0xbb0d1dfc, 0x53f6f1c8, 0xcbbef553, 0x7e9a0e04, 0x64115fdf,
-	0xfd05af7e, 0xdc6939cd, 0xfd14c4df, 0xdfd14c4d, 0xcdfd14c4, 0x6fee7a39,
-	0x26fe8a62, 0x89bfa396, 0x324d5be9, 0xb934efa5, 0x726f6d28, 0xbf7dda53,
-	0x6ae729e0, 0xef380a3d, 0x985b8b4f, 0x1117e4c3, 0x4ae7a14e, 0x4f9df43a,
-	0x45ca7ed0, 0x12fbc0e6, 0x394e2287, 0x39acbf70, 0x2e7444cf, 0x4c3bb674,
-	0x9730bdf0, 0xb62f9be7, 0x617e503b, 0x8e9eed1e, 0x946cb6e8, 0x16b5cdbf,
-	0x35bbee27, 0x23c7f45f, 0x1bd6149f, 0x714cdee8, 0xe9c52767, 0xbdfc2d0a,
-	0xc7114384, 0x91e3288e, 0x9179da5c, 0x277c45f9, 0xb0eedcc7, 0x3f60e32a,
-	0xea326e30, 0x3025c2b7, 0xbf5bf52e, 0xb0a9fa98, 0x842b8f74, 0xe1fa6b8c,
-	0x410a2771, 0x3176a6e3, 0xc701177a, 0xf5c66875, 0xfc3f744b, 0x78c25fa2,
-	0xd3b44761, 0x354d718e, 0x21df8c5f, 0xdfcf45bf, 0xf8742c5f, 0xb893d425,
-	0x5bef89bd, 0x33d881c6, 0x1f0d79d3, 0x47a865c9, 0x5d9db971, 0x9a179d7c,
-	0x9f900bfc, 0x6077958a, 0x7ba58cc0, 0x730c4c9b, 0x9128bea2, 0x38363bbe,
-	0xe339df17, 0x1b15a0ef, 0x1f90dbdd, 0xde5c74eb, 0xdf3318b0, 0xcfb5d057,
-	0x3bd415ff, 0xec983b19, 0x4bfb0495, 0xb404752c, 0x44cae45f, 0x5b24e3bb,
-	0x7568724f, 0x8f7fe794, 0x31be7a06, 0xf4505eb3, 0x7763f527, 0xfdc0ef85,
-	0x86578e88, 0x4d1f21e5, 0x645e3a33, 0x1f7fbfc0, 0x3cfc44dd, 0x8791ca2d,
-	0x7dfdac2f, 0x8f9e0af4, 0x3788bc73, 0x69acad83, 0x8ffc7146, 0xf1452f3f,
-	0xa79a740d, 0x7fb43a0a, 0x765373d4, 0x063613d1, 0xfaeb54e0, 0xd7e7c0ca,
-	0x7078c069, 0xc10718d4, 0x4661e06f, 0x273a98e7, 0xe076f847, 0xfa80df7e,
-	0xb2878c6c, 0xd61e474c, 0xd277d24b, 0xef8ef27d, 0xa827fdf8, 0x50537919,
-	0x8389fefc, 0xf8afab92, 0xdc31c9e3, 0x6a945d4e, 0xa8788759, 0x944c9bb3,
-	0xe748bc1e, 0x9dce9982, 0xd96bf18a, 0xa97bf7d0, 0xfae18eaf, 0x41a57921,
-	0x74410231, 0x30e594c2, 0x0cbde6a6, 0xbbf6d0f4, 0x8bdfbac3, 0x43327003,
-	0xdef3c89a, 0xeb178f1d, 0xac65f534, 0xe31dfddf, 0xbda7acf4, 0x8fcddbfc,
-	0xc6554f2f, 0xc7997a43, 0xd50c7fc8, 0x6d0b6b3b, 0x843f3bea, 0xcc63c7e7,
-	0x523de9db, 0x14877949, 0x4e315aea, 0x3de8ce11, 0x37bfc1ae, 0x9e819afb,
-	0x3d399a76, 0xdd3c8aa7, 0xeafaf229, 0xbbeaa53b, 0x7a14cf6b, 0xa3cc2b6e,
-	0x8fd4fc7e, 0xdf1b37b4, 0x6d6788cb, 0x6efabe34, 0x012f5a94, 0x2b0920f4,
-	0xe23a675d, 0xfb1250ab, 0x63e7e784, 0x1d20e68a, 0xb2f2685c, 0xcdf4824f,
-	0xc6c8f085, 0x49d5fc60, 0x3f5af7da, 0xda81331f, 0x1b6beda9, 0x284fb227,
-	0x3a27e978, 0x69154daa, 0x624ebd1f, 0x9c3be2af, 0xa80d5920, 0xa776d597,
-	0x78e2de40, 0xc5fc82ef, 0xbb903df4, 0x3ed1e89f, 0xfbe94e9d, 0x3f2a1e4d,
-	0x694d54dd, 0xca9ea9a0, 0xa46a6a3f, 0x23db96f4, 0x167f9172, 0x3ec65fed,
-	0xdaf7a209, 0x1027bd36, 0xd4553f94, 0x51ad1d37, 0x7254e8e8, 0x1c9fdfdf,
-	0x53bbedc3, 0x3b3e38e3, 0xf7c0dec0, 0x972e80da, 0xdbfd6d5b, 0xfdca1d1d,
-	0xf9e3a3ae, 0x3c4765fe, 0xc31f2fcf, 0x64596efd, 0xe8fed8ad, 0x3fef0378,
-	0xefc6ac45, 0x7bf78db2, 0x77a45d2a, 0xb1357ea4, 0x5831fee8, 0x73ca163f,
-	0xaea7f27a, 0x41e5dfe2, 0xaf9d5cbc, 0x42b6fdfa, 0x61eefaab, 0x8fcf7f3a,
-	0x7a02f7df, 0xfad5fea7, 0x3e702663, 0x4befad0c, 0x43c9e7e5, 0xc2a9f1e1,
-	0x6817c4b7, 0x241f2367, 0x9d45f107, 0xa542f883, 0xd6fe9543, 0xa7387216,
-	0x0f3a151a, 0x07eee7e7, 0x76842ea3, 0xb4cce383, 0xbbe3208f, 0x9d9eb0cb,
-	0xa12fc282, 0x63bca0fc, 0xca83f2ac, 0x0fbd2a07, 0xefe33e06, 0x8c75f334,
-	0x5f79fa95, 0x7b475958, 0x845dc46c, 0x2b7a83d7, 0x12b1adea, 0xb0792f7f,
-	0xedcef5d8, 0x11b19fc8, 0x96918c0e, 0xf7d4b2ac, 0xfe3ec725, 0x9543c2af,
-	0xa3c0fd0b, 0xca0c1c17, 0x123fc3bb, 0x50e7240e, 0xf6fd238e, 0x8c4eb721,
-	0x177629b1, 0xc7cfdfa7, 0x1d226fc8, 0x1d660875, 0x30e87bde, 0xf05f7df7,
-	0x0ebe78e8, 0x16d68e95, 0xe3074a32, 0x96f6873a, 0xba7aea7b, 0x230779d7,
-	0xc61a97f9, 0xacf143cb, 0xfe482bae, 0xa979c19d, 0xec0c64f0, 0xa127e81f,
-	0xe8ef42c6, 0xe0e856dd, 0xd3f036fc, 0x67ac0dca, 0x3e8a35fd, 0xf8944c7b,
-	0x7e8ac87b, 0xa4172ee9, 0x1a996599, 0xcf4743bd, 0xefe15f3a, 0x5645fb8a,
-	0xa372ef8d, 0x171c1d6f, 0xe5c8521f, 0x3cf4d743, 0x2f13f711, 0xf742d5fc,
-	0xea0c2f8b, 0xcef68d3c, 0x533d5685, 0x2a9b23de, 0x8b9dde80, 0xf90c133e,
-	0xf39ef2a5, 0x0ef7e8e7, 0x176d7a83, 0xb5bda34f, 0x4cc4ab68, 0xeb609e78,
-	0x3d20b737, 0x4f457bcd, 0x5b9a99e7, 0x7a471e37, 0xc04fb73c, 0x85d96fe7,
-	0x31c5027d, 0x7c225b6b, 0x0a5fa866, 0xc77fac79, 0xe3c7c96e, 0x39c5328b,
-	0x3ef1946a, 0xa0a5d731, 0xeb713e5d, 0xfb843a5d, 0x8b02edbc, 0xb48f7e83,
-	0xdf0c79de, 0x8db7391d, 0x366b2fdf, 0xf9c0ee47, 0x0ceb4a97, 0xc17ca083,
-	0x635e5e76, 0xf70cfd29, 0xcd3c1743, 0x60b3fe28, 0x8ff9046f, 0x1ff45af3,
-	0x8eec8205, 0xfcda6dea, 0x4066d67c, 0x53b0583a, 0x07b35e5b, 0x79f241f2,
-	0x2f12a150, 0x29b2ce19, 0xe3c2d25e, 0xef7caa07, 0xb97b5f6d, 0xde506d1c,
-	0x897f66ff, 0x5f0ff7a5, 0x23e926f9, 0x2997cf0b, 0xff9033f9, 0x178e1bea,
-	0xca752e15, 0xb3c55fd8, 0x675836dc, 0x2b662bdd, 0x0775edfa, 0x79e246ce,
-	0x016145b0, 0xbd99177a, 0xded1592c, 0xe4bf607b, 0x1ed6f845, 0xfb893f34,
-	0x9e2f7598, 0xa13c6030, 0xb262df74, 0xef312657, 0xfd9bf44a, 0x89dac8a2,
-	0x7de9da8e, 0xce77265f, 0x1c2e7ec3, 0x0ed15b30, 0x4ff97ba8, 0xfcc76ec7,
-	0xa7dd028b, 0x201890bc, 0x55b7993a, 0x0c437ba2, 0x1efcb42d, 0xaf10913a,
-	0x28b6e788, 0x0ee58f7a, 0x19e23bc4, 0x4648eef0, 0xd071e13a, 0xf44b4f79,
-	0xd9b5b9bd, 0xf9cff580, 0xbc557e38, 0x094b4a97, 0xe71e0bcf, 0x75b89cf8,
-	0xa430e6d7, 0x64f5a783, 0x76811f8f, 0x0d3b7883, 0xe15e181d, 0xc5d85ffd,
-	0xd37791cf, 0x376301c1, 0x2f3ce01d, 0xa7c00747, 0x472ff7a4, 0x97e89d07,
-	0xddffbf92, 0x0ed0c7b9, 0x87e7e08f, 0xd51b77d5, 0x2e071a77, 0xdf14753c,
-	0xbfb34ae7, 0xa5777640, 0xc5da8bed, 0x9d09de8c, 0x4be78853, 0x02bdbf26,
-	0xca7277d1, 0x2f14d9b3, 0x6d7607d5, 0x744378c1, 0x3ac7c538, 0xe1b6cb92,
-	0xb6c598fb, 0xc2f6936f, 0xcefd163a, 0xeb11e748, 0x3fc67e15, 0xbea2073c,
-	0xa7780c4b, 0x07b519f3, 0xc65cfc8d, 0xe1fbed3e, 0xce9cf11d, 0x959d0c4b,
-	0x804fd18b, 0x411c70fe, 0xc2e9fee6, 0x451dfc83, 0xa85c9fd5, 0x47b8a7be,
-	0x60836efb, 0x3dea9b7d, 0x70429850, 0xd6371a18, 0x73797681, 0x0d84f339,
-	0xc17d21fd, 0x5c7ca9df, 0xb5fa8bf1, 0x1bd1fb27, 0xbcc91daa, 0x15daf721,
-	0x014775b9, 0xbbd1e39f, 0x7be1d0df, 0xf93b1d8c, 0x3fcc3bef, 0x062af208,
-	0x1af519f7, 0xd4a753b9, 0x0fe914ff, 0x5bde76e0, 0x052892ff, 0x8bf797cb,
-	0xa79a9fb1, 0x48753f79, 0xf5571457, 0xfe830e6f, 0x33d36cbe, 0x4c0597e4,
-	0x23fb3791, 0x4bd46e28, 0xbedcecbe, 0x50f7cd12, 0x76085aba, 0x94222e26,
-	0x69f6eabe, 0xa85d3deb, 0x670e7bec, 0xfff9e0d7, 0x90e031af, 0xba5f23d7,
-	0x8e67e9df, 0x6eefe428, 0xef68287d, 0x056b0fef, 0x77ea0f96, 0x63c4cfb8,
-	0xeafe4aa4, 0xfe4d56dd, 0xa6bb369a, 0x1dfbb5fe, 0xfed9ef9a, 0x11f7cd0c,
-	0x7c9a9dc7, 0xa6817b5e, 0x64f7c8fe, 0xc0547e4d, 0xe63fa9a5, 0xef935bbc,
-	0xf4f584ca, 0xe9a8cf61, 0xa9a0bb24, 0xd661d93f, 0x465d7ff4, 0x65df26b4,
-	0xd8a3e051, 0xfbfdaa99, 0xff6e42a7, 0x7c2aa686, 0x8ed4e17f, 0x37edfaa3,
-	0x2bc76814, 0x5de3b593, 0x1df05e29, 0xff9e9d41, 0xf8a6027e, 0x34ba09fb,
-	0x9809fbfe, 0xc04fdfc7, 0x013f7f14, 0xe4dd7fcb, 0xa6befca4, 0x04bfca02,
-	0xf7e6097e, 0xe9829f83, 0x609fe0cb, 0x77e0e5f9, 0xb8f7194c, 0xca1bee32,
-	0x4e153fb8, 0xbdfd296f, 0xef87f4a3, 0x3df4ea0d, 0x795d6bdf, 0xe3e025e2,
-	0x7467db22, 0x086e595f, 0xa31c6294, 0xe18975f3, 0xf1e667f9, 0x418a6f1d,
-	0xa18036fd, 0x9ddcc49d, 0x6e3ee26f, 0xad438bdd, 0x81efae78, 0x07787ffd,
-	0x27d85fbf, 0xf0e6bc51, 0xd891b3fe, 0xc29797cf, 0xe90a30e9, 0x7cd7c845,
-	0x0d7e502b, 0x6773c77c, 0xca4af793, 0xa46d67bb, 0x554cbeef, 0x2fba3ef3,
-	0xd7b3deed, 0xb85a7880, 0x7f7d2f7b, 0xf35af81d, 0xcd76f77d, 0x87d62b77,
-	0x47cea174, 0xf7cf8571, 0xa9f9fdab, 0x7f2a4d7e, 0xddf3fe3f, 0x418e5647,
-	0x6ab7bc7d, 0x17b5c600, 0x3b1139ee, 0xf1f007fb, 0x66cf4bd5, 0x3da81ea2,
-	0xd1e72920, 0x07b57f78, 0xcf9e4af4, 0x6f7526bf, 0x63379e29, 0xb3ba047b,
-	0x4f5b25f4, 0xee16c4e7, 0x728355df, 0xedc66176, 0xb57f8a7a, 0x83bc4a49,
-	0x6350d3bf, 0x6baedc65, 0xdf123afb, 0xdb7dffa9, 0x1ef1ebd1, 0x23c1c774,
-	0xc74c5ef4, 0x4fe3493e, 0xf1cb1d8d, 0xf72c763b, 0x77dcbeff, 0x09cf1224,
-	0x8476d03e, 0xa7e75dc3, 0xf2561ff5, 0xbc12901d, 0xfeb44bf7, 0xcd2497f9,
-	0xc0b801ef, 0xcdfba171, 0x7022d3fb, 0xf8db275d, 0x7d40d378, 0xd56a7950,
-	0x1bff9c1c, 0xe53cf2f6, 0xddfa327d, 0xaeab8ea1, 0x767285db, 0xe7d49b61,
-	0xd839f779, 0x98efcc2f, 0xebe9d39e, 0x1b1c2fa9, 0xc37f7004, 0x749b2035,
-	0x62af5284, 0xa59bd72c, 0xea2a4f06, 0x47169391, 0xfdf9d204, 0x8811a1ae,
-	0x6298c3df, 0xba49ebb9, 0x1f60be07, 0xb5a4ef1f, 0xeee9123d, 0x5211bee4,
-	0x2dcbfef0, 0xe9ba7aca, 0x5e6f1bbb, 0x6fb553c2, 0xe9fb05bb, 0x9f2f1fc1,
-	0xf54ad636, 0xb89df0df, 0x93aced05, 0xc0ddfc19, 0xfe460663, 0xdc3dc2f5,
-	0x70793e4e, 0xfbe0f6f0, 0x7c14d359, 0x7df06474, 0xf5fb0bf5, 0x77dbbd4a,
-	0x3d3d4d31, 0xed4ed7c7, 0x33beac7c, 0x5e7da10f, 0x6744b8f3, 0xf5f46a1d,
-	0x4ffeb8b1, 0x57e769b7, 0x46b9c0ad, 0x0d8d8fef, 0x039ad7a2, 0x21637cdd,
-	0xf2a03f3a, 0xa9f08389, 0x8664f1e2, 0xe765e7c4, 0xecd5f8ef, 0xdd7445dd,
-	0xe3c4be3b, 0x31ef83b7, 0x74be2939, 0xb55a7f19, 0x2dfc821b, 0xbd23bdfa,
-	0x989e686b, 0x9c1f63d2, 0x1a1f942e, 0x987e879b, 0x93ccfc9b, 0x185bec0c,
-	0xebed16b3, 0x891dfa28, 0xd76e38cd, 0xffbd3d3e, 0xb03a6b5f, 0xef23df00,
-	0xc0a30272, 0xe9b6bbbc, 0x4667dfbb, 0x629e773b, 0xf0ea7ee7, 0x7fa04be4,
-	0xb489976b, 0x923d9abe, 0x5c17cf0f, 0x57dee450, 0x406f937b, 0x2e39ad7a,
-	0x9a3fd159, 0x70fc96d8, 0x77e92e61, 0xdaeb57b2, 0xb75c9db8, 0x58bb205b,
-	0x156a43b5, 0x629ce43b, 0xd65b9f07, 0x57e3edc9, 0xea11b604, 0x7b030dad,
-	0x9b5de604, 0xdaec8539, 0xcadd695a, 0x473c0ec1, 0xe61bb5a5, 0xe7443c1f,
-	0xd1cec0ae, 0xaddc2f94, 0x69b6d7cd, 0xf8bfaaf3, 0x3b6ed8d2, 0x37fa3863,
-	0x1c615225, 0x0a9bc3f2, 0xe77f555e, 0xf49c6bce, 0xe80f27fb, 0xb8d4531c,
-	0xd16bc204, 0xc7cc2f2b, 0xc26afb79, 0x347fe49c, 0xdae096fe, 0xd7ee17f1,
-	0x1bdee074, 0xf0e333f2, 0xe9cfd8ed, 0xf05e917c, 0x2cbaefe1, 0xfd815d42,
-	0x32df0499, 0xbb7b3b8c, 0x293e4922, 0xca1a08e7, 0x632affb9, 0xb2a6180c,
-	0xe7f72c7e, 0x38eaf543, 0x0e8a405d, 0xb1811392, 0xd8af5429, 0xde57cfc0,
-	0xfd24e119, 0xedc4c436, 0x6e2621f5, 0x75d10faf, 0x85dfa32e, 0x7df02418,
-	0x6997ac8e, 0x9d6d60ff, 0x0417f685, 0xe10e957b, 0x955076b1, 0x887de90e,
-	0xfd032db5, 0x8c5f353a, 0xec7b33df, 0x478b5283, 0x8cece387, 0x047d9417,
-	0x74cb4fae, 0x90747d56, 0x996c657e, 0x3dea7e66, 0x7e7d9fcc, 0xa59f9856,
-	0xef807e67, 0x75ff6c28, 0x86ec93ae, 0xf7f532a4, 0x2e49ea1a, 0x12fcf0a8,
-	0x7018bde8, 0x816c7745, 0x1db66a6e, 0x96b2ff22, 0x76c4afb5, 0x1d7c91a5,
-	0xbefe06a5, 0x4f186951, 0xfcb8e375, 0xa5d2512a, 0xc3f6b4e3, 0x7eb27191,
-	0xc63ba41c, 0xf2e34db9, 0x79953f68, 0x6f0d7d61, 0x43d677f3, 0x13943ee5,
-	0x7c0d7d3d, 0x466ff288, 0xd54d60bd, 0xbf9c69d8, 0x6ea2f116, 0xf6f85a3e,
-	0xea27c493, 0xc66acc39, 0xa3667bf9, 0xc41a9ad9, 0xdf908b17, 0xc377ded0,
-	0x138c7cbf, 0xeb6abff0, 0xe9973a7c, 0xa2b58c69, 0xfa48b75f, 0x7e25f692,
-	0xda2ddf2c, 0xcdfbcdaf, 0x11fdfe9c, 0x1949f902, 0x0de3bae3, 0x0a498fc4,
-	0x08f76c7f, 0xfb600e74, 0xcf1e3a77, 0x7e2810ab, 0x36143377, 0x624994da,
-	0xba22eabd, 0xe333724f, 0x4b596347, 0x3dbbf28c, 0x796fb431, 0x9beeb293,
-	0x2843fe75, 0xdbea8e57, 0x749e3192, 0xc4e4d6b4, 0x1b59cbfe, 0xc15a6fbd,
-	0x153d29da, 0x9fa2f75e, 0x2226f73a, 0x63c9fddd, 0xf6d678a4, 0x50223be5,
-	0xe5b167be, 0x044fdc56, 0xb7c6ec50, 0x73b3fb01, 0xd51df742, 0x2f60c4fb,
-	0x027d21c7, 0x1d2127fe, 0xd8dc079c, 0x5fb77a73, 0x2317c7f8, 0x2c5f7f11,
-	0x5b96e179, 0x9d5ffa19, 0xa82d47e4, 0x5df7465f, 0x33da9c81, 0xaaf07bf2,
-	0x5bc55de2, 0xf01d5e37, 0xb0af182f, 0x938404a6, 0xc91965f4, 0xe8917fa5,
-	0xf0e5d69c, 0xbc7dc2aa, 0x0e3b9f82, 0x8a15f970, 0xb70f156f, 0x43f5bbe2,
-	0x236eef49, 0xc923313c, 0xb87a50cb, 0x3080be1c, 0xc4d93ce9, 0xa1f92318,
-	0x4f2e4583, 0x2813cf07, 0xf33b795e, 0xf48012bc, 0xf5f7f096, 0xc70adefc,
-	0xb782855b, 0x2fdf313f, 0x71ff9232, 0xce323b78, 0x606e34dd, 0xe50dbe6f,
-	0xb2f8fed3, 0x37fce1c6, 0x18fa5f55, 0x3f0863f2, 0x376bf087, 0x2ff09d1e,
-	0xc69e8f08, 0x6ecbe248, 0xae7b4b7c, 0x7fe22f4c, 0x5fb58e30, 0xaf93f9f0,
-	0x46055f80, 0xf8f8bfbf, 0x54dead38, 0xa5c2a6f1, 0x07e0b8bf, 0x2ad47fcc,
-	0xe70abed0, 0x748dbbe3, 0x57dd43ff, 0x5e4ff751, 0x5cf5c719, 0xd801fa68,
-	0xb55fb84b, 0x40e4e326, 0x194f33b4, 0xfef87ed4, 0xdacb07ef, 0xb6f7f113,
-	0xe9e2283e, 0xddff0329, 0x872f350f, 0x07e4b8f1, 0xc22f46f1, 0xf86103e9,
-	0x1f33d404, 0xcf5cf708, 0x070671f3, 0x26e3cbe6, 0x53903de0, 0x798e357a,
-	0xf07f12bf, 0x8f9479f1, 0x027aa62c, 0x074a5dff, 0xf61ddefe, 0x1736082b,
-	0xbb83e7cc, 0x9d7de8d2, 0x718d7dee, 0x467f0edc, 0xdc774759, 0xe2815eff,
-	0x355133fe, 0x84c4fee1, 0x877c2e2d, 0x437df4f3, 0xb4df69b3, 0xea3e3b41,
-	0x978a64fd, 0xfee7e06e, 0xabea752e, 0xb75bf482, 0xc8be2dbe, 0xd1e4e7cb,
-	0xbfa88cef, 0x86db2747, 0xc7dcff73, 0xd550df7f, 0x5fc75d67, 0x73c704b0,
-	0xdfe2533f, 0x0fe1f9dd, 0xc3eb0526, 0x4dad4f43, 0x0daa7ec7, 0x05a72cde,
-	0xb1ee877f, 0xaa5bb424, 0x4e955a9f, 0x0f53f4f6, 0x545fa3a4, 0xba6d63bd,
-	0x0f70f94c, 0xbe3a65f9, 0x1b9e2fee, 0xd4f3e745, 0xdccaf6fe, 0x1d30a8af,
-	0x3dbd412a, 0x56afeae5, 0xda41fee0, 0xffc5027d, 0x15f6b066, 0x332b67a8,
-	0x16b15f38, 0xe87fc913, 0x776bf68f, 0x4ec5ff0d, 0x646f0794, 0x81cfd59c,
-	0x203e127a, 0xd5df1035, 0xdfa3adf2, 0x7fcd5c09, 0x7ea7b027, 0x56ffed22,
-	0x9de8172d, 0xfcf519ab, 0xf1a4f377, 0x59c704d1, 0xd18fb3ab, 0x794b57fb,
-	0x6fa314f9, 0x67ec49df, 0x3fdf818b, 0xe094ee64, 0xb29270fb, 0x9d73385f,
-	0xca717bf2, 0x639b6938, 0x53af07b7, 0x591df652, 0xdf2477ea, 0x32f0506e,
-	0x5789e975, 0x54efd0ed, 0x1e3cc7bd, 0xe9b3bfbe, 0x619faa5c, 0x3a33f41c,
-	0xf066985f, 0xd71f3a3c, 0x7148c3bd, 0xc1acdcd2, 0xcfd41c52, 0x11b45259,
-	0xab4b99d3, 0x728f9d1e, 0xcd94d5b8, 0xf9f2358f, 0x114e0835, 0xed91f4e5,
-	0xb842ceb7, 0x7fc4df9d, 0xfb61abff, 0xc2ddfa30, 0xafdee4fe, 0xf9eff89a,
-	0xa264dd3d, 0x2b26d9f4, 0xcfeba3c3, 0xff29d935, 0x4a0e4daf, 0xcd3cf4d9,
-	0xd7f4d8ef, 0xe14b88df, 0xb973bbf4, 0x3bf4cdab, 0x39460d88, 0x2bc03c75,
-	0x1ddaaaed, 0xc2eb280f, 0xbdb2b8f7, 0x0e1113c9, 0x3e2c0fb9, 0x75b3a686,
-	0x7d97df3c, 0x24eae4f3, 0x2c77d614, 0x7cc4f33d, 0x78fb7ef8, 0x270835f7,
-	0x148bb6d3, 0x607238a7, 0xbbc22555, 0xaf91877a, 0xf9f7594f, 0x8f71e94d,
-	0x75f97c62, 0x160dc53d, 0xc4f33b6d, 0x877f0c03, 0x9821b177, 0xbd74afde,
-	0x7ee78f57, 0xaaf8e5e6, 0x78fc383f, 0x449b5abe, 0xf803b3fc, 0xf3a7f32a,
-	0xcba5a2d5, 0xc6cb7e08, 0xb8426fbb, 0x937bd79d, 0x0fce9f90, 0xee744b1f,
-	0xf820457d, 0xdbbc72ab, 0xbfe056af, 0x575b6c50, 0xc723dc98, 0x04b961bf,
-	0x3e0743df, 0xf9fb474d, 0x3fe5fd9b, 0x6097eeb8, 0x1861fedd, 0x1a5133af,
-	0xe0df3dfa, 0xf584ea19, 0x3ef3f7e5, 0x6af1d2e8, 0x539f9ffc, 0x36213fc0,
-	0xe6219df8, 0xd4f9828d, 0x61fc141c, 0x26cfa859, 0xbf43a67d, 0x8fcffc11,
-	0x198ce734, 0x9f4828fb, 0xcbdf37f7, 0x4fd875a5, 0x1ddc8f5a, 0xfcc89ef9,
-	0x547b7a41, 0x83f98c20, 0x73f6edc6, 0xfb40cca0, 0x1724f14e, 0x2e786f10,
-	0xe181c2ec, 0x99ff303b, 0xc2f1e381, 0xf14f604b, 0xf2931078, 0xd9f9d67b,
-	0x50b22f81, 0xb7ae86ce, 0x882fe5ee, 0xaff66a3e, 0xfad028ba, 0xcba67f27,
-	0x0ffafcba, 0x1645f53d, 0x7d33efe2, 0xb6fd1f20, 0x1640860b, 0xb7eea1e2,
-	0x58ff9e5c, 0xf3e5a838, 0xf7e81b57, 0x1304eb3a, 0xf48949d1, 0x2e1fc525,
-	0x87f1e71c, 0x924f03ba, 0xc83aed3c, 0xc48b40e3, 0x8c38d2f6, 0x399fd49b,
-	0xcbacf286, 0xe831fdce, 0x2b71de9f, 0x41e8aa1c, 0xde12675d, 0x4dd83bf7,
-	0x3c8fdc0f, 0x0c3bfc8f, 0xf3a369fb, 0x9c2b2cbd, 0x39f15da1, 0x7c30f3f2,
-	0x257930bf, 0xdf79f9d2, 0x8f941cc0, 0xadfd666f, 0xbf86e28e, 0xb27ba70f,
-	0xe6926db5, 0x3af7799c, 0x703f127c, 0x29fb54c4, 0xe7c1c99c, 0x1b8e0cb9,
-	0x837e6ec8, 0xba2e13ef, 0x7b13f38a, 0xed53f399, 0x7b0643f2, 0x15bb7f50,
-	0xc8ed527e, 0x1bffbf29, 0x85b3e5f1, 0xd504fd32, 0xffc7a54f, 0x4cf7fe9f,
-	0x33412fff, 0x800063ec, 0x00008000, 0x00088b1f, 0x00000000, 0x5aa5ff00,
-	0x5554700d, 0xbdef3e96, 0xdd2749fe, 0x12421349, 0x42068408, 0x03621a88,
-	0xc4d67281, 0x206efce9, 0x6b01bb33, 0x8d08c42d, 0x749d2422, 0x6aece882,
-	0x021a6eb9, 0x367564ac, 0x1d47598c, 0x809f9b47, 0x9476ec28, 0x0da0c040,
-	0x6ba2cb0a, 0x3a26aa45, 0xab545b55, 0xa6e00eac, 0xd63b8223, 0x3be7b8e2,
-	0x1dddb5ef, 0xa6ed4fe2, 0xee7dba8a, 0x9ee7b9cf, 0xce77ce7b, 0x52b48f3d,
-	0x6a22ca22, 0x2a08cdcf, 0x6ea6ff0a, 0x6d4445a2, 0xf67f2429, 0xaf1f4541,
-	0x7dbc64d3, 0x58c9a340, 0xce08eb93, 0x4754419e, 0x459a26dd, 0x654284b4,
-	0x29bf71a4, 0x795bcbf2, 0x6d0dfebc, 0x61931741, 0xb06aad1b, 0x7aa6d513,
-	0x1314360b, 0xaacaab0d, 0x0bcc6286, 0x4b9d2e95, 0x7efe0df4, 0x879b744a,
-	0x2a224f99, 0xf60f14d3, 0x169c9d1b, 0x8b5dc9dc, 0x491bfb97, 0xeaa7984d,
-	0x534f98f3, 0xa3827c08, 0xd81d4b25, 0x9964b468, 0x8eef3e23, 0x07d6d237,
-	0xd2a14e31, 0xf9f6123b, 0x68858f4b, 0xcb17d121, 0x650faa17, 0xdaae79f2,
-	0x51337403, 0x29ed768d, 0x70ddf785, 0x05564ccc, 0xafbc67fc, 0x670239f2,
-	0xfa65ea34, 0x790a4752, 0x4bceccac, 0x1bcf0f1e, 0xd8293b99, 0x3f6fe7c5,
-	0xe78990a0, 0xeeb11db5, 0x6d79e14c, 0x9bb648e6, 0xf036ddf7, 0xdb878b3b,
-	0x2cf7fef6, 0xcf58b9ae, 0x9e433647, 0x6dfa1514, 0x174ff277, 0xce607f91,
-	0x3f3177fb, 0xf44d69ff, 0x67bd37ed, 0x05d7d621, 0x5afd8f9e, 0x82d5f60e,
-	0x56f0a56e, 0x3cfdda27, 0x9bbf48af, 0xe5dff86f, 0xb386575c, 0xf8be7e38,
-	0xa7a25d39, 0x69f8bd18, 0xd602f73e, 0x43eb468b, 0x21ee5976, 0x6e717b96,
-	0x252e8ece, 0x5fae9d71, 0x4b69768f, 0x9d15cb0e, 0x6615b8a9, 0x6c0d4d15,
-	0x851f4276, 0x1797b38a, 0xb97f5f47, 0x9bf42d74, 0x9dbd2c12, 0x90b517cf,
-	0xc7e2c7dc, 0x04b49bb6, 0x6a0f1679, 0x3443dc1e, 0xc90e9a95, 0xe2a77bbd,
-	0x61bca83e, 0xd61267a9, 0x2b7bbe8d, 0x7955196f, 0x73fafdbd, 0x7975ca04,
-	0xc9a9b0ce, 0xd7721b7d, 0x80ede5e7, 0xc400d9fe, 0xfaa94e8e, 0xc7951efe,
-	0xbfd7c7e7, 0x46a79c68, 0xf089ce2b, 0x9dc506f8, 0x9f671ce3, 0xf587bb58,
-	0xe9ef86be, 0xb46fbe45, 0x6938752f, 0xfda26ccd, 0xff42b91d, 0xda4b8773,
-	0xf4914750, 0x16e1d2bf, 0x2dc760fa, 0xf0ea1f42, 0x51d03d08, 0x8ed1ed27,
-	0x033fe906, 0x708cff51, 0xe2ec20a0, 0x4a6d7c14, 0x1cce1e9c, 0x9e494f43,
-	0x24a99c3f, 0x991453d3, 0x3cb870ff, 0xa5fa6018, 0x939ca732, 0xc0d1ca8d,
-	0x4b4e68fa, 0xb40ca12f, 0x674a41f9, 0x037bb1bb, 0x3ffbb61e, 0x43daedd4,
-	0x4bcfc533, 0xf33aaf30, 0xdbf846ce, 0x692b2ce5, 0x1ec3cfac, 0xde63dfef,
-	0x0555d3e9, 0x683fd1db, 0xfef95b73, 0x94dc5787, 0xff47bd01, 0xb78d234d,
-	0xb05a28ae, 0x0ae994b9, 0xcc7622bb, 0xc86e6efc, 0x4fc6bb66, 0xb83553e6,
-	0xe3a4d4ba, 0x02b67384, 0xc1aeb7fd, 0xdb261b3e, 0xfc795816, 0x57f7b94a,
-	0xf7a627d8, 0x0aeb29da, 0xd98bd0bc, 0xf3cabef5, 0xa66eff02, 0x80f79e5e,
-	0xdf649dc3, 0x822bcb47, 0x45c59bb0, 0x07cf36b3, 0xd9ba767f, 0xf5bb3fbc,
-	0x51e7c87e, 0xc14e94d3, 0xb8099731, 0xf3fdc410, 0x452e953e, 0x716c30ec,
-	0x7f993299, 0x2b22b538, 0x194eebc0, 0xb8da7df7, 0x7dc633ef, 0xd5fdc3bf,
-	0xfdcbbedc, 0x1fb88768, 0x9e988aed, 0xd085a34d, 0x0da7f05f, 0xef44792f,
-	0xa3a0f9a3, 0x3b0e5a66, 0xd33f025c, 0x81bf27f1, 0x5ca278e5, 0x036ee397,
-	0x6b6e867f, 0x85d7d3e8, 0x858b4f84, 0x4bffb0bc, 0x9f609f58, 0xf5f175b1,
-	0x9bb2ed24, 0xe7c29029, 0x20b6c3a0, 0x895344f4, 0x0ecb5f80, 0x692e08e7,
-	0xcf8ab329, 0x017a644f, 0xabd29e09, 0xae5e7d56, 0x85fc216b, 0x8cfb2475,
-	0x9980d504, 0x399fc4ed, 0xf2c99854, 0x167e188e, 0x49fd0fa3, 0xcff6fc13,
-	0xd7db9a67, 0xfe7cfd14, 0x13854365, 0xa9b15eb0, 0x4eff33b0, 0xe1acfc7d,
-	0x0699fe87, 0x943ce33f, 0x7dc7ca12, 0xce1d8f44, 0x2ee987bf, 0x1ead787b,
-	0x8285c207, 0x5c2e14df, 0x42549c06, 0xd44dc8e7, 0xaf7dfc77, 0x47d027e9,
-	0xfdd079e8, 0xd3af7fc7, 0x6739df4a, 0x50a4f8e2, 0xfd04e2be, 0x3df74181,
-	0x409dc13f, 0x87395f9b, 0xdfa6cb71, 0x3327ab7b, 0xa783586e, 0xff37603b,
-	0xed97dba2, 0xd027ff40, 0x2b11cb5b, 0x0f2b2ec1, 0x0af67ff4, 0x3bf4b78f,
-	0xa8fb80dc, 0xbbe88667, 0xc7dec8f3, 0x7d236f61, 0xae87f166, 0xfe7bbffd,
-	0x25679911, 0x35bd5b98, 0xcfbc4a54, 0xe37fe3d1, 0xb49f6135, 0x6fd015d0,
-	0x39179c57, 0xfeea27ea, 0xa9f1543d, 0xf5bd0037, 0xc46bf81f, 0x0a0cfab5,
-	0x65e96ec0, 0xe46647be, 0x6a86f57b, 0xc771e12a, 0x6ff04ad0, 0x86eac97b,
-	0xcd5efa9d, 0x5f1f84a9, 0xfb14ccf3, 0x3bb1be6b, 0x3d57711f, 0x23cf6fba,
-	0x23679859, 0xc99edbc8, 0xf57ac476, 0xdd163b69, 0x6bb7f72f, 0xf7206fcf,
-	0x64ed1b3e, 0x03cccd3e, 0x99ef35fb, 0xd1f00c1d, 0xe3fafb5e, 0x1a87b895,
-	0xe83db9ed, 0xa6dbb2bf, 0x2d670f42, 0xf8728c9e, 0xbbb359e1, 0xba0ceb17,
-	0x2ea27879, 0x56a45a4f, 0x3bab2fee, 0x37d7711f, 0x80bfe1f1, 0xf75af5dc,
-	0x3ce2cff3, 0x3884ad7b, 0xeb1f6171, 0xe85dd78d, 0x2dc7cf35, 0x9873ec8f,
-	0x94972f60, 0x82cf95ee, 0xef3eaf7f, 0xf45bad92, 0x439de819, 0x11e78fd8,
-	0x6525f2e2, 0x85ff527b, 0x5e25bdde, 0x97c5dfd6, 0x09bd8bea, 0x17f31bf6,
-	0x526b6edf, 0x6024147c, 0xbf19f25c, 0x3b2019c9, 0x8366dfc7, 0x99e878bc,
-	0xbe296791, 0x737ee2fe, 0x6a3ac2d8, 0x94e6d2b6, 0xf83fb8cc, 0x0ebcfef2,
-	0x3ba9f3e7, 0x34c7910a, 0x84ac882f, 0x51b05c5f, 0x7bcf2e4a, 0xbe5f88db,
-	0x2a971b83, 0x4f2ddf25, 0xc7ee854d, 0x38f57357, 0x16c07576, 0x1ddf280c,
-	0x83a3fe8f, 0x8eccef9c, 0x67af77d3, 0x7e71297e, 0xad425b6f, 0x2db7de6e,
-	0x738fc753, 0xe33f7f3c, 0xcfb19558, 0xe79287aa, 0x299152df, 0x8966d3f6,
-	0xc60e2214, 0x88ac2ff8, 0x10a45ae1, 0x5d763578, 0xe013d23d, 0xe08acbc8,
-	0xf2a0ef88, 0xa86e96a1, 0x4fae3b34, 0xa8204a5f, 0x0f7f8c95, 0x7b8c8bb9,
-	0x55ef5e60, 0xdbe57ee8, 0x98d8f36f, 0x246a4b4f, 0xab53791d, 0x7c8e9223,
-	0x46a8e468, 0xcbeb8d3b, 0x199ff18a, 0x4649afdf, 0xf6643fb8, 0x8fdbc6d8,
-	0x6f3c438f, 0x2ab37e1d, 0xfdd0a93e, 0x4d2069a6, 0x646723f6, 0xe9b6ec11,
-	0x3875e4b9, 0x1fc133a7, 0x65760647, 0x8fe2137b, 0xaa3b90cf, 0x137e287c,
-	0x7ca3fafd, 0xa54f81d8, 0xf6ab0acd, 0x65b1af22, 0x3a294d0a, 0xe5b1b01d,
-	0xa7b4befb, 0x5e2e7ec2, 0x1e3f156d, 0x73822251, 0x0aae27b9, 0x23988c3e,
-	0xca8e7382, 0x18fc11ff, 0x09591099, 0xb4adcadc, 0xc9f196af, 0x1e2e9591,
-	0xa0c2b2ff, 0x03e491a7, 0x57322785, 0xb5ea4f03, 0x3711b7d1, 0x09d99769,
-	0x7be9893f, 0xa227a19d, 0x783b86c7, 0xb3410ffc, 0x4e61f10b, 0x0be462a5,
-	0xb5f9f896, 0x908d3fb8, 0xf841c0eb, 0xdddd9367, 0xfdc1a32b, 0xbc1f20af,
-	0xe5dddb33, 0x326f5eba, 0xcacae587, 0xee2d6afc, 0xfbdd3b29, 0xdfcc158f,
-	0x07c91c5f, 0x4bb5b1ce, 0xdd7b6a1c, 0x47fb13ba, 0x807ba3cd, 0xde1c175f,
-	0x9f582b27, 0xada196ad, 0x67d22ca5, 0xa429c8e6, 0x6f604bf8, 0xbdba2382,
-	0xb2ef148d, 0x561e9f08, 0x9767eb2a, 0x4b940f71, 0xa1f603b4, 0xe6fcf7e8,
-	0x00efabc0, 0x6686466f, 0xf58f4e09, 0x4f030ba7, 0x3e3703a6, 0x981ef8e0,
-	0x60ffef13, 0xfa0b5ef5, 0xc3b8bf97, 0x9ef6e112, 0xbbe7c9cd, 0x0cf6ed7c,
-	0x9e3d0bf8, 0xec7b0fd0, 0xeac7a649, 0x4e197605, 0xe88083f2, 0x29c79cfd,
-	0x0e54b7f2, 0xdf0f41b5, 0xd698cbd2, 0x6313e812, 0xa9f331e8, 0xce1fcf41,
-	0xb6f84879, 0x430f0b4e, 0xcc07236f, 0xe4ef7c04, 0x7f7426b8, 0x1aef105a,
-	0xadc700f5, 0x216e3d2c, 0x0fa4b45e, 0x8cbdc4ad, 0x989d5bf4, 0xa7c8e9bf,
-	0xdb3f38f9, 0xdbce3e63, 0x3670e472, 0xf78dcec1, 0x6cc7c704, 0x1ff4b78c,
-	0x24bbc6c9, 0x86aadfd6, 0x4717210a, 0x47e012b8, 0x85afdfac, 0x8b7f210b,
-	0xf1825432, 0xf996e428, 0x49a06b4c, 0xe8aad1ce, 0x34474f7e, 0xf7b1f9c1,
-	0x6e8551f6, 0x250f8caf, 0x1d3707c8, 0xb11254bd, 0xd9a0f1c7, 0xe81395c0,
-	0xdffdd62f, 0x09c0c8b9, 0xbf0cda5e, 0xbc27071f, 0xf5a3dc31, 0xae7dc816,
-	0xb63b9742, 0x3bcaf85e, 0x6de32023, 0x992a5daf, 0xc6758c59, 0xa3c04a3c,
-	0x017c7159, 0x0e0ae40e, 0xf367326c, 0x2bcf7cb9, 0xd25e4eee, 0x96b1b8dc,
-	0xd33ad3a7, 0x6bd0b5fd, 0x5de40513, 0xb1ae5637, 0x8570f476, 0x553ebf7e,
-	0xf6fb8f7f, 0x964ec128, 0x7d6322eb, 0x9bc17cee, 0x5d67f030, 0xf85ac6f5,
-	0x7e597ddf, 0xf9bbe24b, 0xedaff887, 0xadd7a649, 0x339b58df, 0x1efb9f8e,
-	0x126a7eda, 0xd9afcf5d, 0xdb36a3bb, 0x4c7f7d75, 0x98b68bee, 0x49e6959c,
-	0xbe58fa89, 0xb71276b1, 0xaffe52eb, 0x7dcfd0fa, 0x8c3588f1, 0xb5facbb8,
-	0xfdb7fce0, 0x0925bd71, 0x5f807fb7, 0x9d6b0533, 0xfe5bbe33, 0x12ab6db1,
-	0x4f80561e, 0xe2bd5fec, 0x0937ec67, 0x18aa6dfb, 0x5a68a753, 0x37791d3d,
-	0x4f4f5779, 0x6d8c53ac, 0xa8a72819, 0x49bd88b7, 0xd2b87ecb, 0x623e8e3d,
-	0xd4ae6ff3, 0x864d9f64, 0x6fa94f1d, 0x1e15e679, 0x53ccb97f, 0x557ec956,
-	0xbf92a9ae, 0xa6a7dd8f, 0x860fcf52, 0x80bf1db2, 0xcd07453d, 0xb949f84e,
-	0x4f33eba6, 0xfc2efcbd, 0xe1db2f31, 0x357e64ea, 0xbcfa6955, 0xea273663,
-	0x5f63d140, 0xffe07be5, 0xa5cbec5b, 0xd3b262ce, 0x953f1e64, 0x3df0573b,
-	0xc6c7cfb6, 0x7aa5693e, 0x645ed3be, 0x533afefe, 0x3adbe3b1, 0xc51be493,
-	0x12d9c169, 0xf890bf87, 0xe85c1d16, 0xf7c05cd4, 0xd6fe1da0, 0x677ff5fe,
-	0x0c8f0e23, 0x0bba67fe, 0xd3ed75b8, 0xb6cfd874, 0x81d38f81, 0x6606270f,
-	0x1d9ed039, 0x1fd03972, 0x16b8fbad, 0x368cbaf3, 0x8b30675e, 0xf636b19c,
-	0x13d58e7e, 0xcdd1de12, 0x73af6bd0, 0x614b2fdb, 0x82dda9ef, 0xce8efc63,
-	0xd788fc44, 0xe3395c19, 0xeb1265d5, 0xf5b3050c, 0xd45a033a, 0x7acc0a19,
-	0xea34019d, 0x6751680c, 0x0cea3f40, 0x006751a0, 0x68033a8d, 0xa2d019d4,
-	0x2bfe80ce, 0xbcb16ba8, 0x50de4e51, 0xecd1aadf, 0xf40fff82, 0xf5e4416a,
-	0x74d31c0f, 0xc412877a, 0xfbc67f7d, 0xaf460e23, 0x28b075e8, 0xe77953c7,
-	0xfbcb341f, 0x5eda1a20, 0xd6f71337, 0x5571b9af, 0xd9371117, 0xa3cddb14,
-	0x6a1f5127, 0x1bdc53ef, 0x2e5fe85d, 0x5c1b6c72, 0xfa237ef8, 0xd56ecd7b,
-	0x9abafb85, 0x6f97fa8d, 0x58ea57b0, 0x2cc739d5, 0x15fbcf72, 0xeffde1ca,
-	0x64efeab0, 0x2cbdc6bf, 0x9545b0f7, 0x1d6fda3c, 0xcb4bf792, 0x4d738a8b,
-	0x7eda1e42, 0x1382e7cb, 0x9df4b69d, 0xb21fd790, 0xc524d739, 0x7de48f57,
-	0xc174fc7e, 0x45433c8d, 0xa7d5af4c, 0x7b5edf90, 0xf9213801, 0xb47e4248,
-	0x33fcd9d6, 0x5da467e4, 0x7efce133, 0x644ee87e, 0x6d3dd6f9, 0xb09228fe,
-	0x9930737f, 0x6df60df6, 0x99c823cd, 0x034a8fdc, 0x943fb2e2, 0x74aa1fdc,
-	0xc6927d64, 0x3cd1e63f, 0xff755be4, 0x3f40e6b4, 0xdbb977ef, 0x61caf92a,
-	0x2570f78f, 0xb349f1fb, 0x272fea47, 0xbde4d98f, 0x9cfb7e75, 0x8d4bfaa4,
-	0x1fea5536, 0xc48acc1b, 0xdee52bf1, 0xaacbb063, 0xeea57bba, 0x10eb9552,
-	0xe1d98e7f, 0x3786f2d1, 0x5cc377c0, 0x6abfd497, 0xe10bf4ac, 0xf72f7ec7,
-	0x7f16683c, 0x8254e9ab, 0xc9abd32a, 0xad7f816d, 0x3d8a7562, 0x298fed99,
-	0x78ab0fec, 0xbb04c6af, 0x915db0da, 0x100a42bc, 0x8695e7ac, 0xfe0d573e,
-	0xfb0a57eb, 0x3d56bdcb, 0x5553ce0f, 0xc5d79fe1, 0xdfe78b71, 0xfc0b5e47,
-	0x55c71d66, 0x5f671cb4, 0x37bf708f, 0x9ebe6a6d, 0xc072bbe7, 0x3319f57f,
-	0x726a4f01, 0x95e85e7e, 0xfced5f78, 0x095bef84, 0x737da5df, 0xa8e1f7d3,
-	0xc8493e89, 0x759a4f6b, 0xca7d61fc, 0xec14eb7b, 0x5e3eea55, 0x3474cf69,
-	0x8ca2bb49, 0x340bffc4, 0xe02f6f3d, 0x4a6672bb, 0xeb0fa2dd, 0x6eedda6b,
-	0x0b863fe8, 0xbefc8dbb, 0xe796e540, 0x5bd54eed, 0xdc29d30b, 0xca5b8d3f,
-	0xe7617e14, 0x5c71d47c, 0x3d4f3fc2, 0x7d05c0bb, 0x4377697c, 0xc739351f,
-	0x31dde1e6, 0x72ffe0cb, 0xdc55c359, 0x029d2797, 0x438f9fd8, 0x5adfacdd,
-	0x5d41481c, 0x50d1e43d, 0x38a63f27, 0x1ebfaef1, 0x716fb74f, 0x140acfc2,
-	0xb5b7ea27, 0xd935dda9, 0xe676bfcc, 0x9cf0370c, 0x61ea55f1, 0x76eadc23,
-	0x53506b70, 0x6ca6b5f4, 0xff0df3d4, 0x54a6f729, 0xd7f78a4d, 0x1d147e1b,
-	0xf11d22fc, 0x6dd447f5, 0x807f8377, 0x835eee6c, 0xfea0ec3f, 0xbf5269a6,
-	0xe5d1d98d, 0x613b39fd, 0xf4ab5347, 0xef8d8d75, 0x0c4f9199, 0xc1cde6dd,
-	0x7cd72bfe, 0xce5b25be, 0x8cbd7e39, 0xb8033771, 0x165eb63b, 0x463df1c3,
-	0x6b781dfd, 0x26baea32, 0x326baea3, 0xa326baea, 0xea326bae, 0xaea326ba,
-	0xbaea326b, 0x6baea326, 0x26baea32, 0x97ae13a9, 0x878eddf6, 0x08ea1da4,
-	0xbc4278c8, 0xc7eab9b8, 0x55175dd5, 0xa577538d, 0xc4865714, 0xbd7bf65d,
-	0xcea63dde, 0x26aefeca, 0xe0d57bf8, 0x431e7b84, 0x7163d25e, 0x6b5438b3,
-	0x603c16f1, 0x54f07c17, 0x8d6f5b8d, 0xf52ecfe9, 0x9b64cbd9, 0x2ca87b8f,
-	0x5152659a, 0x23ee34c7, 0xdf84ef56, 0x1bf09ce0, 0xd31bf0b4, 0xfcdfb8ec,
-	0x5daec2d6, 0x0109e7aa, 0x726c13c9, 0x32375bbf, 0x2f7d30ae, 0xe5709339,
-	0xc2b831b3, 0x90159a0f, 0x95a0ed63, 0x233f74ba, 0x37254ff8, 0x0e3f9c7f,
-	0x9c7484ce, 0xda1a9699, 0xb5a67d87, 0x1791baa5, 0x9d8bbfb3, 0x88a6dc9d,
-	0x06a1afbf, 0xbc1c77d9, 0x7c9e4749, 0x73d1c4ef, 0xf7f9e1bf, 0xf25d83fe,
-	0xd793ad9d, 0xe0fffa2e, 0xae954d4d, 0x84775f8f, 0x9659e77d, 0x43b654ea,
-	0x16d5578e, 0xb8ba922a, 0x50fe2a9a, 0x58ae3da3, 0xd377a380, 0xb577dc3c,
-	0xc839e1b5, 0x2efec399, 0xa32cdfef, 0x6a1a6bbe, 0xd9f4cbde, 0xbe373cec,
-	0x3dcd4dab, 0x800b0544, 0xb0c57547, 0xadd4b3ab, 0x1963dd60, 0xbf83bfde,
-	0xa7cc5edc, 0x96fee356, 0xb3b69753, 0xce63ee4b, 0x32fbdc42, 0xf51fabab,
-	0x9e6f2d86, 0xb2c27a90, 0xd442d70c, 0x79bcb61b, 0x5c73a75a, 0xe51b8afd,
-	0xabab13b2, 0x66f8827f, 0x109f3eeb, 0x09a1fd67, 0xc0fb7449, 0x09f3eee4,
-	0x3f05ae71, 0x3f4e9df8, 0xafb84c53, 0x5c944356, 0xf21dbbd5, 0x4bfeebf9,
-	0xa8d3cf7f, 0xaaa7c9c4, 0x749c5c74, 0xe7b0c282, 0xf90ec5d1, 0x713397fe,
-	0xdbd43cfd, 0x10b5d8a8, 0xfdaf38f3, 0xe2f8ec35, 0xc1a79ead, 0x7738cf27,
-	0x3579f10e, 0x0d90c758, 0xbbe319ed, 0xdbd529e4, 0x3d36b688, 0x357e9260,
-	0x6df68a58, 0xfa20f435, 0x81762fd9, 0xf393ed4f, 0x3a622c6e, 0xb79a1acf,
-	0xe9788ede, 0x73fe8dd9, 0xec5e9e65, 0xdfeeb637, 0xe58f9c69, 0xc37987d9,
-	0xf9e4aa85, 0x6dea37c3, 0x55c22ecc, 0x371d0e3a, 0x93aca8fc, 0x58e7fbe4,
-	0xa55e39fb, 0xfdf9781a, 0x47bcb372, 0x7e4c4f20, 0x0a5d5eea, 0xa3de5879,
-	0x61afbc86, 0x5299ec9c, 0x7b6ef98f, 0xc77ec80d, 0x7c653b0d, 0xe3af396c,
-	0xa685b4a3, 0x0de404e0, 0x4e0d1e53, 0x7653bc80, 0xdc5cda8c, 0xb51810be,
-	0xe1787f21, 0xe86d476f, 0x7543c17f, 0x56bfe1e3, 0xc2df09ad, 0x3f5951b2,
-	0x921af79d, 0x04e8c277, 0x4d856fe4, 0x6c02596f, 0xe69e73b7, 0xb7f2937d,
-	0xd3638922, 0xfe9a5b0d, 0x87b04aa8, 0xe490cfe9, 0x259d54ab, 0xdd14bee3,
-	0x3e8f7dff, 0x6e8ec2a8, 0x09dcb208, 0x69e737f6, 0x1248e5d3, 0x6bacb0df,
-	0xf3837031, 0x3f71a4b5, 0x3cbe4733, 0xe423c0c5, 0x378c8d8f, 0xbeb7a6fe,
-	0x79c8be42, 0x8c7e18dc, 0x261c314d, 0xebef5dc4, 0x20fc1711, 0xbbdade79,
-	0xf78ad91e, 0x76e3536d, 0xd78fbc8b, 0xdb456df4, 0x259efada, 0x4cbf2487,
-	0x65f9cf9a, 0x9c9d7d12, 0x7b68e463, 0x39adf3f0, 0x76cbece3, 0x0ed12d70,
-	0x37439a4e, 0xd27abde0, 0x480eea9f, 0x0fdd091c, 0x6ad9d97c, 0xecae2377,
-	0xd8a555fa, 0xa9f5b7d7, 0xfaa98f32, 0xa751d947, 0x52540fcc, 0x87e6fc11,
-	0xe1e011da, 0x0c3c24ec, 0x8972dd48, 0xddae7043, 0xadb60778, 0x123e4a71,
-	0x5336ebf3, 0x98adc3e8, 0xef90e597, 0x45b70c11, 0x6f7c2ca6, 0x4aeee29a,
-	0x2ece2bc8, 0x9d041599, 0x830a19dd, 0x15cfe8ef, 0xd5c8ea37, 0xd6ae3a69,
-	0x7bad0da8, 0x352dfc79, 0x5bf1b82c, 0x6ff307e0, 0x7697acb7, 0xb14cd945,
-	0x290a5cdb, 0x7067fffa, 0x3d7bc42d, 0x67ad3df6, 0x20efb05b, 0xf04afbde,
-	0x8fa8b599, 0xe45d95fe, 0x80d50689, 0x33d3cf99, 0x7bb70481, 0xb8942cee,
-	0xc686a513, 0x2cff91fb, 0x6a3a954f, 0x13d704cf, 0xd3da6ef8, 0xf5e4a37c,
-	0xc7a4fe87, 0x29a5d1fb, 0x3d71e46e, 0x711b5cf3, 0x5d479eae, 0xa29afe32,
-	0xa13c0bf3, 0xa967a7eb, 0xe69ece7e, 0xc59f794c, 0x8767a1ee, 0xbfbe3267,
-	0xe5bc3259, 0x1803a8d5, 0x667b1fdf, 0x4fb73f70, 0xde770d29, 0x75733e07,
-	0xb9945779, 0xde4edee4, 0x7b13e379, 0xf1867d74, 0x897dac1d, 0xfefde923,
-	0xcb80febf, 0x002220b3, 0x00000000
-};
-
-#endif /*__BNX2X_INIT_VALUES_H__*/
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ad5ef25add3..fbf1352e9c1 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -53,12 +53,19 @@
 
 #include "bnx2x.h"
 #include "bnx2x_init.h"
+#include "bnx2x_init_ops.h"
 #include "bnx2x_dump.h"
 
-#define DRV_MODULE_VERSION	"1.48.105"
-#define DRV_MODULE_RELDATE	"2009/03/02"
+#define DRV_MODULE_VERSION	"1.48.105-1"
+#define DRV_MODULE_RELDATE	"2009/04/22"
 #define BNX2X_BC_VER		0x040200
 
+#include <linux/firmware.h>
+#include "bnx2x_fw_file_hdr.h"
+/* FW files */
+#define FW_FILE_PREFIX_E1		"bnx2x-e1-"
+#define FW_FILE_PREFIX_E1H		"bnx2x-e1h-"
+
 /* Time in jiffies before concluding the transmitter is hung */
 #define TX_TIMEOUT		(5*HZ)
 
@@ -1539,7 +1546,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 						    len, cqe, comp_ring_cons);
 #ifdef BNX2X_STOP_ON_ERROR
 					if (bp->panic)
-						return -EINVAL;
+						return 0;
 #endif
 
 					bnx2x_update_sge_prod(fp,
@@ -5232,13 +5239,15 @@ static void bnx2x_gunzip_end(struct bnx2x *bp)
 	}
 }
 
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
 {
 	int n, rc;
 
 	/* check gzip header */
-	if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED))
+	if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
+		BNX2X_ERR("Bad gzip header\n");
 		return -EINVAL;
+	}
 
 	n = 10;
 
@@ -5247,7 +5256,7 @@ static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
 	if (zbuf[3] & FNAME)
 		while ((zbuf[n++] != 0) && (n < len));
 
-	bp->strm->next_in = zbuf + n;
+	bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
 	bp->strm->avail_in = len - n;
 	bp->strm->next_out = bp->gunzip_buf;
 	bp->strm->avail_out = FW_BUF_SIZE;
@@ -5369,8 +5378,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	msleep(50);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
 	msleep(50);
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 
 	DP(NETIF_MSG_HW, "part2\n");
 
@@ -5434,8 +5443,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	msleep(50);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
 	msleep(50);
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 #ifndef BCM_ISCSI
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
@@ -5510,7 +5519,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
 
-	bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
+	bnx2x_init_block(bp, MISC_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, MISC_REG_E1HMF_MODE, IS_E1HMF(bp));
 
@@ -5518,14 +5527,14 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	msleep(30);
 	REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x0);
 
-	bnx2x_init_block(bp, PXP_COMMON_START, PXP_COMMON_END);
+	bnx2x_init_block(bp, PXP_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1(bp)) {
 		/* enable HW interrupt from PXP on USDM overflow
 		   bit 16 on INT_MASK_0 */
 		REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
 	}
 
-	bnx2x_init_block(bp, PXP2_COMMON_START, PXP2_COMMON_END);
+	bnx2x_init_block(bp, PXP2_BLOCK, COMMON_STAGE);
 	bnx2x_init_pxp(bp);
 
 #ifdef __BIG_ENDIAN
@@ -5571,60 +5580,60 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
 	REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
 
-	bnx2x_init_block(bp, DMAE_COMMON_START, DMAE_COMMON_END);
+	bnx2x_init_block(bp, DMAE_BLOCK, COMMON_STAGE);
 
 	/* clean the DMAE memory */
 	bp->dmae_ready = 1;
 	bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8);
 
-	bnx2x_init_block(bp, TCM_COMMON_START, TCM_COMMON_END);
-	bnx2x_init_block(bp, UCM_COMMON_START, UCM_COMMON_END);
-	bnx2x_init_block(bp, CCM_COMMON_START, CCM_COMMON_END);
-	bnx2x_init_block(bp, XCM_COMMON_START, XCM_COMMON_END);
+	bnx2x_init_block(bp, TCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, UCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CCM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XCM_BLOCK, COMMON_STAGE);
 
 	bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
 	bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
 
-	bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END);
+	bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE);
 	/* soft reset pulse */
 	REG_WR(bp, QM_REG_SOFT_RESET, 1);
 	REG_WR(bp, QM_REG_SOFT_RESET, 0);
 
 #ifdef BCM_ISCSI
-	bnx2x_init_block(bp, TIMERS_COMMON_START, TIMERS_COMMON_END);
+	bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE);
 #endif
 
-	bnx2x_init_block(bp, DQ_COMMON_START, DQ_COMMON_END);
+	bnx2x_init_block(bp, DQ_BLOCK, COMMON_STAGE);
 	REG_WR(bp, DORQ_REG_DPM_CID_OFST, BCM_PAGE_SHIFT);
 	if (!CHIP_REV_IS_SLOW(bp)) {
 		/* enable hw interrupt from doorbell Q */
 		REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
 	}
 
-	bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
-	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
-	bnx2x_init_block(bp, TSDM_COMMON_START, TSDM_COMMON_END);
-	bnx2x_init_block(bp, CSDM_COMMON_START, CSDM_COMMON_END);
-	bnx2x_init_block(bp, USDM_COMMON_START, USDM_COMMON_END);
-	bnx2x_init_block(bp, XSDM_COMMON_START, XSDM_COMMON_END);
+	bnx2x_init_block(bp, TSDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CSDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, USDM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XSDM_BLOCK, COMMON_STAGE);
 
 	bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 	bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
 
-	bnx2x_init_block(bp, TSEM_COMMON_START, TSEM_COMMON_END);
-	bnx2x_init_block(bp, USEM_COMMON_START, USEM_COMMON_END);
-	bnx2x_init_block(bp, CSEM_COMMON_START, CSEM_COMMON_END);
-	bnx2x_init_block(bp, XSEM_COMMON_START, XSEM_COMMON_END);
+	bnx2x_init_block(bp, TSEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, USEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, CSEM_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XSEM_BLOCK, COMMON_STAGE);
 
 	/* sync semi rtc */
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
@@ -5632,16 +5641,16 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
 	       0x80000000);
 
-	bnx2x_init_block(bp, UPB_COMMON_START, UPB_COMMON_END);
-	bnx2x_init_block(bp, XPB_COMMON_START, XPB_COMMON_END);
-	bnx2x_init_block(bp, PBF_COMMON_START, PBF_COMMON_END);
+	bnx2x_init_block(bp, UPB_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, XPB_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, PBF_BLOCK, COMMON_STAGE);
 
 	REG_WR(bp, SRC_REG_SOFT_RST, 1);
 	for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) {
 		REG_WR(bp, i, 0xc0cac01a);
 		/* TODO: replace with something meaningful */
 	}
-	bnx2x_init_block(bp, SRCH_COMMON_START, SRCH_COMMON_END);
+	bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE);
 	REG_WR(bp, SRC_REG_SOFT_RST, 0);
 
 	if (sizeof(union cdu_context) != 1024)
@@ -5649,7 +5658,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 		printk(KERN_ALERT PFX "please adjust the size of"
 		       " cdu_context(%ld)\n", (long)sizeof(union cdu_context));
 
-	bnx2x_init_block(bp, CDU_COMMON_START, CDU_COMMON_END);
+	bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
 	val = (4 << 24) + (0 << 12) + 1024;
 	REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
 	if (CHIP_IS_E1(bp)) {
@@ -5658,7 +5667,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 		REG_WR(bp, CDU_REG_CDU_DEBUG, 0);
 	}
 
-	bnx2x_init_block(bp, CFC_COMMON_START, CFC_COMMON_END);
+	bnx2x_init_block(bp, CFC_BLOCK, COMMON_STAGE);
 	REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
 	/* enable context validation interrupt from CFC */
 	REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
@@ -5666,20 +5675,25 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	/* set the thresholds to prevent CFC/CDU race */
 	REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
 
-	bnx2x_init_block(bp, HC_COMMON_START, HC_COMMON_END);
-	bnx2x_init_block(bp, MISC_AEU_COMMON_START, MISC_AEU_COMMON_END);
+	bnx2x_init_block(bp, HC_BLOCK, COMMON_STAGE);
+	bnx2x_init_block(bp, MISC_AEU_BLOCK, COMMON_STAGE);
 
 	/* PXPCS COMMON comes here */
+	bnx2x_init_block(bp, PXPCS_BLOCK, COMMON_STAGE);
 	/* Reset PCIE errors for debug */
 	REG_WR(bp, 0x2814, 0xffffffff);
 	REG_WR(bp, 0x3820, 0xffffffff);
 
 	/* EMAC0 COMMON comes here */
+	bnx2x_init_block(bp, EMAC0_BLOCK, COMMON_STAGE);
 	/* EMAC1 COMMON comes here */
+	bnx2x_init_block(bp, EMAC1_BLOCK, COMMON_STAGE);
 	/* DBU COMMON comes here */
+	bnx2x_init_block(bp, DBU_BLOCK, COMMON_STAGE);
 	/* DBG COMMON comes here */
+	bnx2x_init_block(bp, DBG_BLOCK, COMMON_STAGE);
 
-	bnx2x_init_block(bp, NIG_COMMON_START, NIG_COMMON_END);
+	bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE);
 	if (CHIP_IS_E1H(bp)) {
 		REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_E1HMF(bp));
 		REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_E1HMF(bp));
@@ -5763,6 +5777,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 static int bnx2x_init_port(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
+	int init_stage = port ? PORT1_STAGE : PORT0_STAGE;
 	u32 low, high;
 	u32 val;
 
@@ -5771,7 +5786,9 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
 
 	/* Port PXP comes here */
+	bnx2x_init_block(bp, PXP_BLOCK, init_stage);
 	/* Port PXP2 comes here */
+	bnx2x_init_block(bp, PXP2_BLOCK, init_stage);
 #ifdef BCM_ISCSI
 	/* Port0  1
 	 * Port1  385 */
@@ -5798,21 +5815,19 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
 #endif
 	/* Port CMs come here */
-	bnx2x_init_block(bp, (port ? XCM_PORT1_START : XCM_PORT0_START),
-			     (port ? XCM_PORT1_END : XCM_PORT0_END));
+	bnx2x_init_block(bp, XCM_BLOCK, init_stage);
 
 	/* Port QM comes here */
 #ifdef BCM_ISCSI
 	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20);
 	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31);
 
-	bnx2x_init_block(bp, func ? TIMERS_PORT1_START : TIMERS_PORT0_START,
-			     func ? TIMERS_PORT1_END : TIMERS_PORT0_END);
+	bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
 #endif
 	/* Port DQ comes here */
+	bnx2x_init_block(bp, DQ_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, (port ? BRB1_PORT1_START : BRB1_PORT0_START),
-			     (port ? BRB1_PORT1_END : BRB1_PORT0_END));
+	bnx2x_init_block(bp, BRB1_BLOCK, init_stage);
 	if (CHIP_REV_IS_SLOW(bp) && !CHIP_IS_E1H(bp)) {
 		/* no pause for emulation and FPGA */
 		low = 0;
@@ -5837,25 +5852,27 @@ static int bnx2x_init_port(struct bnx2x *bp)
 
 
 	/* Port PRS comes here */
+	bnx2x_init_block(bp, PRS_BLOCK, init_stage);
 	/* Port TSDM comes here */
+	bnx2x_init_block(bp, TSDM_BLOCK, init_stage);
 	/* Port CSDM comes here */
+	bnx2x_init_block(bp, CSDM_BLOCK, init_stage);
 	/* Port USDM comes here */
+	bnx2x_init_block(bp, USDM_BLOCK, init_stage);
 	/* Port XSDM comes here */
+	bnx2x_init_block(bp, XSDM_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? TSEM_PORT1_START : TSEM_PORT0_START,
-			     port ? TSEM_PORT1_END : TSEM_PORT0_END);
-	bnx2x_init_block(bp, port ? USEM_PORT1_START : USEM_PORT0_START,
-			     port ? USEM_PORT1_END : USEM_PORT0_END);
-	bnx2x_init_block(bp, port ? CSEM_PORT1_START : CSEM_PORT0_START,
-			     port ? CSEM_PORT1_END : CSEM_PORT0_END);
-	bnx2x_init_block(bp, port ? XSEM_PORT1_START : XSEM_PORT0_START,
-			     port ? XSEM_PORT1_END : XSEM_PORT0_END);
+	bnx2x_init_block(bp, TSEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, USEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, CSEM_BLOCK, init_stage);
+	bnx2x_init_block(bp, XSEM_BLOCK, init_stage);
 
 	/* Port UPB comes here */
+	bnx2x_init_block(bp, UPB_BLOCK, init_stage);
 	/* Port XPB comes here */
+	bnx2x_init_block(bp, XPB_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? PBF_PORT1_START : PBF_PORT0_START,
-			     port ? PBF_PORT1_END : PBF_PORT0_END);
+	bnx2x_init_block(bp, PBF_BLOCK, init_stage);
 
 	/* configure PBF to work without PAUSE mtu 9000 */
 	REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
@@ -5885,18 +5902,17 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	/* Port SRCH comes here */
 #endif
 	/* Port CDU comes here */
+	bnx2x_init_block(bp, CDU_BLOCK, init_stage);
 	/* Port CFC comes here */
+	bnx2x_init_block(bp, CFC_BLOCK, init_stage);
 
 	if (CHIP_IS_E1(bp)) {
 		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
 		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
 	}
-	bnx2x_init_block(bp, port ? HC_PORT1_START : HC_PORT0_START,
-			     port ? HC_PORT1_END : HC_PORT0_END);
+	bnx2x_init_block(bp, HC_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? MISC_AEU_PORT1_START :
-				    MISC_AEU_PORT0_START,
-			     port ? MISC_AEU_PORT1_END : MISC_AEU_PORT0_END);
+	bnx2x_init_block(bp, MISC_AEU_BLOCK, init_stage);
 	/* init aeu_mask_attn_func_0/1:
 	 *  - SF mode: bits 3-7 are masked. only bits 0-2 are in use
 	 *  - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
@@ -5905,13 +5921,17 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	       (IS_E1HMF(bp) ? 0xF7 : 0x7));
 
 	/* Port PXPCS comes here */
+	bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
 	/* Port EMAC0 comes here */
+	bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
 	/* Port EMAC1 comes here */
+	bnx2x_init_block(bp, EMAC1_BLOCK, init_stage);
 	/* Port DBU comes here */
+	bnx2x_init_block(bp, DBU_BLOCK, init_stage);
 	/* Port DBG comes here */
+	bnx2x_init_block(bp, DBG_BLOCK, init_stage);
 
-	bnx2x_init_block(bp, port ? NIG_PORT1_START : NIG_PORT0_START,
-			     port ? NIG_PORT1_END : NIG_PORT0_END);
+	bnx2x_init_block(bp, NIG_BLOCK, init_stage);
 
 	REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
 
@@ -5931,7 +5951,9 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	}
 
 	/* Port MCP comes here */
+	bnx2x_init_block(bp, MCP_BLOCK, init_stage);
 	/* Port DMAE comes here */
+	bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
 
 	switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
@@ -6036,7 +6058,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
 	if (CHIP_IS_E1H(bp)) {
 		for (i = 0; i < 9; i++)
 			bnx2x_init_block(bp,
-					 cm_start[func][i], cm_end[func][i]);
+					 cm_blocks[i], FUNC0_STAGE + func);
 
 		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
 		REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov);
@@ -6049,7 +6071,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
 		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
 		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
 	}
-	bnx2x_init_block(bp, hc_limits[func][0], hc_limits[func][1]);
+	bnx2x_init_block(bp, HC_BLOCK, FUNC0_STAGE + func);
 
 	/* Reset PCIE errors for debug */
 	REG_WR(bp, 0x2114, 0xffffffff);
@@ -10595,7 +10617,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	mmiowb();
 
 	fp->tx_bd_prod += nbd;
-	dev->trans_start = jiffies;
 
 	if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
 		/* We want bnx2x_tx_int to "see" the updated tx_bd_prod
@@ -11082,6 +11103,190 @@ static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
 	val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
 	return val;
 }
+static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
+{
+	struct bnx2x_fw_file_hdr *fw_hdr;
+	struct bnx2x_fw_file_section *sections;
+	u16 *ops_offsets;
+	u32 offset, len, num_ops;
+	int i;
+	const struct firmware *firmware = bp->firmware;
+	const u8 * fw_ver;
+
+	if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
+		return -EINVAL;
+
+	fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
+	sections = (struct bnx2x_fw_file_section *)fw_hdr;
+
+	/* Make sure none of the offsets and sizes make us read beyond
+	 * the end of the firmware data */
+	for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
+		offset = be32_to_cpu(sections[i].offset);
+		len = be32_to_cpu(sections[i].len);
+		if (offset + len > firmware->size) {
+			printk(KERN_ERR PFX "Section %d length is out of bounds\n", i);
+			return -EINVAL;
+		}
+	}
+
+	/* Likewise for the init_ops offsets */
+	offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
+	ops_offsets = (u16 *)(firmware->data + offset);
+	num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
+
+	for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
+		if (be16_to_cpu(ops_offsets[i]) > num_ops) {
+			printk(KERN_ERR PFX "Section offset %d is out of bounds\n", i);
+			return -EINVAL;
+		}
+	}
+
+	/* Check FW version */
+	offset = be32_to_cpu(fw_hdr->fw_version.offset);
+	fw_ver = firmware->data + offset;
+	if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
+	    (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
+	    (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
+	    (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
+		printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d."
+				    " Should be %d.%d.%d.%d\n",
+		       fw_ver[0], fw_ver[1], fw_ver[2],
+		       fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
+		       BCM_5710_FW_MINOR_VERSION,
+		       BCM_5710_FW_REVISION_VERSION,
+		       BCM_5710_FW_ENGINEERING_VERSION);
+                return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i;
+	const __be32 *source = (const __be32*)_source;
+	u32 *target = (u32*)_target;
+
+	for (i = 0; i < n/4; i++)
+		target[i] = be32_to_cpu(source[i]);
+}
+
+/*
+   Ops array is stored in the following format:
+   {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
+ */
+static void inline bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i, j, tmp;
+	const __be32 *source = (const __be32*)_source;
+	struct raw_op *target = (struct raw_op*)_target;
+
+	for (i = 0, j = 0; i < n/8; i++, j+=2) {
+		tmp = be32_to_cpu(source[j]);
+		target[i].op = (tmp >> 24) & 0xff;
+		target[i].offset =  tmp & 0xffffff;
+		target[i].raw_data = be32_to_cpu(source[j+1]);
+	}
+}
+static void inline be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+	u32 i;
+	u16 *target = (u16*)_target;
+	const __be16 *source = (const __be16*)_source;
+
+	for (i = 0; i < n/2; i++)
+		target[i] = be16_to_cpu(source[i]);
+}
+
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
+	do {   \
+		u32 len = be32_to_cpu(fw_hdr->arr.len);   \
+		bp->arr = kmalloc(len, GFP_KERNEL);  \
+		if (!bp->arr) { \
+			printk(KERN_ERR PFX "Failed to allocate %d bytes for "#arr"\n", len); \
+			goto lbl; \
+		} \
+		func(bp->firmware->data + \
+			be32_to_cpu(fw_hdr->arr.offset), \
+			(u8*)bp->arr, len); \
+	} while (0)
+
+
+static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
+{
+	char fw_file_name[40] = {0};
+        int rc, offset;
+	struct bnx2x_fw_file_hdr *fw_hdr;
+
+	/* Create a FW file name */
+	if (CHIP_IS_E1(bp))
+                offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+	else
+		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
+
+	sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
+		BCM_5710_FW_MAJOR_VERSION,
+                BCM_5710_FW_MINOR_VERSION,
+                BCM_5710_FW_REVISION_VERSION,
+                BCM_5710_FW_ENGINEERING_VERSION);
+
+	printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
+
+	rc = request_firmware(&bp->firmware, fw_file_name, dev);
+	if (rc) {
+		printk(KERN_ERR PFX "Can't load firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
+	}
+
+	rc = bnx2x_check_firmware(bp);
+	if (rc) {
+		printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
+	}
+
+	fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
+
+	/* Initialize the pointers to the init arrays */
+	/* Blob */
+	BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
+
+	/* Opcodes */
+	BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
+
+	/* Offsets */
+	BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n);
+
+	/* STORMs firmware */
+	bp->tsem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
+	bp->tsem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->tsem_pram_data.offset);
+	bp->usem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->usem_int_table_data.offset);
+	bp->usem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->usem_pram_data.offset);
+	bp->xsem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
+	bp->xsem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->xsem_pram_data.offset);
+	bp->csem_int_table_data = bp->firmware->data +
+		be32_to_cpu(fw_hdr->csem_int_table_data.offset);
+	bp->csem_pram_data      = bp->firmware->data +
+		be32_to_cpu(fw_hdr->csem_pram_data.offset);
+
+	return 0;
+init_offsets_alloc_err:
+	kfree(bp->init_ops);
+init_ops_alloc_err:
+	kfree(bp->init_data);
+request_firmware_exit:
+	release_firmware(bp->firmware);
+
+	return rc;
+}
+
+
 
 static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
@@ -11116,6 +11321,13 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	if (rc)
 		goto init_one_exit;
 
+	/* Set init arrays */
+	rc = bnx2x_init_firmware(bp, &pdev->dev);
+	if (rc) {
+		printk(KERN_ERR PFX "Error loading firmware\n");
+		goto init_one_exit;
+	}
+
 	rc = register_netdev(dev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
@@ -11163,6 +11375,11 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 
 	unregister_netdev(dev);
 
+	kfree(bp->init_ops_offsets);
+	kfree(bp->init_ops);
+	kfree(bp->init_data);
+	release_firmware(bp->firmware);
+
 	if (bp->regview)
 		iounmap(bp->regview);
 
@@ -11412,13 +11629,20 @@ static struct pci_driver bnx2x_pci_driver = {
 
 static int __init bnx2x_init(void)
 {
+	int ret;
+
 	bnx2x_wq = create_singlethread_workqueue("bnx2x");
 	if (bnx2x_wq == NULL) {
 		printk(KERN_ERR PFX "Cannot create workqueue\n");
 		return -ENOMEM;
 	}
 
-	return pci_register_driver(&bnx2x_pci_driver);
+	ret = pci_register_driver(&bnx2x_pci_driver);
+	if (ret) {
+		printk(KERN_ERR PFX "Cannot register driver\n");
+		destroy_workqueue(bnx2x_wq);
+	}
+	return ret;
 }
 
 static void __exit bnx2x_cleanup(void)
@@ -11431,3 +11655,4 @@ static void __exit bnx2x_cleanup(void)
 module_init(bnx2x_init);
 module_exit(bnx2x_cleanup);
 
+
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index faf094abef7..d4b570886c6 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1850,9 +1850,10 @@ static u16 aggregator_identifier;
  * Can be called only after the mac address of the bond is set.
  */
 void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fast)
-{                         
+{
 	// check that the bond is not initialized yet
-	if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr), &(bond->dev->dev_addr))) {
+	if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr),
+				bond->dev->dev_addr)) {
 
 		aggregator_identifier = 0;
 
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index a306230381c..2c46a154f2c 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -26,10 +26,10 @@
 #include <asm/byteorder.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
+#include <linux/if_ether.h>
 
 // General definitions
-#define BOND_ETH_P_LACPDU       0x8809
-#define PKT_TYPE_LACPDU         cpu_to_be16(BOND_ETH_P_LACPDU)
+#define PKT_TYPE_LACPDU         cpu_to_be16(ETH_P_SLOW)
 #define AD_TIMER_INTERVAL       100 /*msec*/
 
 #define MULTICAST_LACPDU_ADDR    {0x01, 0x80, 0xC2, 0x00, 0x00, 0x02}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 74824028f85..d927f71af8a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -51,10 +51,10 @@
 #include <linux/ctype.h>
 #include <linux/inet.h>
 #include <linux/bitops.h>
+#include <linux/io.h>
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
 #include <linux/inetdevice.h>
@@ -89,19 +89,19 @@ static int max_bonds	= BOND_DEFAULT_MAX_BONDS;
 static int num_grat_arp = 1;
 static int num_unsol_na = 1;
 static int miimon	= BOND_LINK_MON_INTERV;
-static int updelay	= 0;
-static int downdelay	= 0;
+static int updelay;
+static int downdelay;
 static int use_carrier	= 1;
-static char *mode	= NULL;
-static char *primary	= NULL;
-static char *lacp_rate	= NULL;
-static char *ad_select  = NULL;
-static char *xmit_hash_policy = NULL;
+static char *mode;
+static char *primary;
+static char *lacp_rate;
+static char *ad_select;
+static char *xmit_hash_policy;
 static int arp_interval = BOND_LINK_ARP_INTERV;
-static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, };
-static char *arp_validate = NULL;
-static char *fail_over_mac = NULL;
-struct bond_params bonding_defaults;
+static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
+static char *arp_validate;
+static char *fail_over_mac;
+static struct bond_params bonding_defaults;
 
 module_param(max_bonds, int, 0);
 MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
@@ -151,14 +151,14 @@ static const char * const version =
 LIST_HEAD(bond_dev_list);
 
 #ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *bond_proc_dir = NULL;
+static struct proc_dir_entry *bond_proc_dir;
 #endif
 
-static __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ;
-static int arp_ip_count	= 0;
+static __be32 arp_target[BOND_MAX_ARP_TARGETS];
+static int arp_ip_count;
 static int bond_mode	= BOND_MODE_ROUNDROBIN;
-static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2;
-static int lacp_fast	= 0;
+static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
+static int lacp_fast;
 
 
 const struct bond_parm_tbl bond_lacp_tbl[] = {
@@ -210,6 +210,7 @@ struct bond_parm_tbl ad_select_tbl[] = {
 /*-------------------------- Forward declarations ---------------------------*/
 
 static void bond_send_gratuitous_arp(struct bonding *bond);
+static int bond_init(struct net_device *bond_dev);
 static void bond_deinit(struct net_device *bond_dev);
 
 /*---------------------------- General routines -----------------------------*/
@@ -221,7 +222,7 @@ static const char *bond_mode_name(int mode)
 		[BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
 		[BOND_MODE_XOR] = "load balancing (xor)",
 		[BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
-		[BOND_MODE_8023AD]= "IEEE 802.3ad Dynamic link aggregation",
+		[BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
 		[BOND_MODE_TLB] = "transmit load balancing",
 		[BOND_MODE_ALB] = "adaptive load balancing",
 	};
@@ -246,12 +247,11 @@ static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
 	struct vlan_entry *vlan;
 
 	pr_debug("bond: %s, vlan id %d\n",
-		(bond ? bond->dev->name: "None"), vlan_id);
+		(bond ? bond->dev->name : "None"), vlan_id);
 
 	vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
-	if (!vlan) {
+	if (!vlan)
 		return -ENOMEM;
-	}
 
 	INIT_LIST_HEAD(&vlan->vlan_list);
 	vlan->vlan_id = vlan_id;
@@ -351,16 +351,15 @@ static int bond_has_challenged_slaves(struct bonding *bond)
  *
  * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
  * or @curr->next otherwise (even if it is @curr itself again).
- * 
+ *
  * Caller must hold bond->lock
  */
 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
 {
 	struct vlan_entry *next, *last;
 
-	if (list_empty(&bond->vlan_list)) {
+	if (list_empty(&bond->vlan_list))
 		return NULL;
-	}
 
 	if (!curr) {
 		next = list_entry(bond->vlan_list.next,
@@ -382,11 +381,11 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
 
 /**
  * bond_dev_queue_xmit - Prepare skb for xmit.
- * 
+ *
  * @bond: bond device that got this skb for tx.
  * @skb: hw accel VLAN tagged skb to transmit
  * @slave_dev: slave that is supposed to xmit this skbuff
- * 
+ *
  * When the bond gets an skb to transmit that is
  * already hardware accelerated VLAN tagged, and it
  * needs to relay this skb to a slave that is not
@@ -394,7 +393,8 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
  * i.e. strip the hwaccel tag and re-insert it as part
  * of the payload.
  */
-int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev)
+int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
+			struct net_device *slave_dev)
 {
 	unsigned short uninitialized_var(vlan_id);
 
@@ -428,7 +428,7 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_de
  * b. The operation is protected by the RTNL semaphore in the 8021q code,
  * c. Holding a lock with BH disabled while directly calling a base driver
  *    entry point is generally a BAD idea.
- * 
+ *
  * The design of synchronization/protection for this operation in the 8021q
  * module is good for one or more VLAN devices over a single physical device
  * and cannot be extended for a teaming solution like bonding, so there is a
@@ -443,7 +443,8 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_de
  * @bond_dev: bonding net device that got called
  * @grp: vlan group being registered
  */
-static void bond_vlan_rx_register(struct net_device *bond_dev, struct vlan_group *grp)
+static void bond_vlan_rx_register(struct net_device *bond_dev,
+				  struct vlan_group *grp)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct slave *slave;
@@ -485,7 +486,7 @@ static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
 
 	res = bond_add_vlan(bond, vid);
 	if (res) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Error: Failed to add vlan id %d\n",
 		       bond_dev->name, vid);
 	}
@@ -520,7 +521,7 @@ static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
 
 	res = bond_del_vlan(bond, vid);
 	if (res) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Error: Failed to remove vlan id %d\n",
 		       bond_dev->name, vid);
 	}
@@ -551,7 +552,8 @@ out:
 	write_unlock_bh(&bond->lock);
 }
 
-static void bond_del_vlans_from_slave(struct bonding *bond, struct net_device *slave_dev)
+static void bond_del_vlans_from_slave(struct bonding *bond,
+				      struct net_device *slave_dev)
 {
 	const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
 	struct vlan_entry *vlan;
@@ -673,7 +675,7 @@ static int bond_update_speed_duplex(struct slave *slave)
  * if <dev> supports MII link status reporting, check its link status.
  *
  * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
- * depening upon the setting of the use_carrier parameter.
+ * depending upon the setting of the use_carrier parameter.
  *
  * Return either BMSR_LSTATUS, meaning that the link is up (or we
  * can't tell and just pretend it is), or 0, meaning that the link is
@@ -685,16 +687,29 @@ static int bond_update_speed_duplex(struct slave *slave)
  * It'd be nice if there was a good way to tell if a driver supports
  * netif_carrier, but there really isn't.
  */
-static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_dev, int reporting)
+static int bond_check_dev_link(struct bonding *bond,
+			       struct net_device *slave_dev, int reporting)
 {
 	const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
-	static int (* ioctl)(struct net_device *, struct ifreq *, int);
+	static int (*ioctl)(struct net_device *, struct ifreq *, int);
 	struct ifreq ifr;
 	struct mii_ioctl_data *mii;
 
 	if (bond->params.use_carrier)
 		return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
 
+	/* Try to get link status using Ethtool first. */
+	if (slave_dev->ethtool_ops) {
+		if (slave_dev->ethtool_ops->get_link) {
+			u32 link;
+
+			link = slave_dev->ethtool_ops->get_link(slave_dev);
+
+			return link ? BMSR_LSTATUS : 0;
+		}
+	}
+
+	/* Ethtool can't be used, fallback to MII ioctls. */
 	ioctl = slave_ops->ndo_do_ioctl;
 	if (ioctl) {
 		/* TODO: set pointer to correct ioctl on a per team member */
@@ -714,23 +729,8 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 		mii = if_mii(&ifr);
 		if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
 			mii->reg_num = MII_BMSR;
-			if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0) {
-				return (mii->val_out & BMSR_LSTATUS);
-			}
-		}
-	}
-
-	/*
-	 * Some drivers cache ETHTOOL_GLINK for a period of time so we only
-	 * attempt to get link status from it if the above MII ioctls fail.
-	 */
-	if (slave_dev->ethtool_ops) {
-		if (slave_dev->ethtool_ops->get_link) {
-			u32 link;
-
-			link = slave_dev->ethtool_ops->get_link(slave_dev);
-
-			return link ? BMSR_LSTATUS : 0;
+			if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
+				return mii->val_out & BMSR_LSTATUS;
 		}
 	}
 
@@ -740,7 +740,7 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 	 * cannot report link status).  If not reporting, pretend
 	 * we're ok.
 	 */
-	return (reporting ? -1 : BMSR_LSTATUS);
+	return reporting ? -1 : BMSR_LSTATUS;
 }
 
 /*----------------------------- Multicast list ------------------------------*/
@@ -748,7 +748,8 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_de
 /*
  * Returns 0 if dmi1 and dmi2 are the same, non-0 otherwise
  */
-static inline int bond_is_dmi_same(struct dev_mc_list *dmi1, struct dev_mc_list *dmi2)
+static inline int bond_is_dmi_same(const struct dev_mc_list *dmi1,
+				   const struct dev_mc_list *dmi2)
 {
 	return memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0 &&
 			dmi1->dmi_addrlen == dmi2->dmi_addrlen;
@@ -757,14 +758,14 @@ static inline int bond_is_dmi_same(struct dev_mc_list *dmi1, struct dev_mc_list
 /*
  * returns dmi entry if found, NULL otherwise
  */
-static struct dev_mc_list *bond_mc_list_find_dmi(struct dev_mc_list *dmi, struct dev_mc_list *mc_list)
+static struct dev_mc_list *bond_mc_list_find_dmi(struct dev_mc_list *dmi,
+						 struct dev_mc_list *mc_list)
 {
 	struct dev_mc_list *idmi;
 
 	for (idmi = mc_list; idmi; idmi = idmi->next) {
-		if (bond_is_dmi_same(dmi, idmi)) {
+		if (bond_is_dmi_same(dmi, idmi))
 			return idmi;
-		}
 	}
 
 	return NULL;
@@ -826,15 +827,14 @@ static void bond_mc_add(struct bonding *bond, void *addr, int alen)
 {
 	if (USES_PRIMARY(bond->params.mode)) {
 		/* write lock already acquired */
-		if (bond->curr_active_slave) {
+		if (bond->curr_active_slave)
 			dev_mc_add(bond->curr_active_slave->dev, addr, alen, 0);
-		}
 	} else {
 		struct slave *slave;
 		int i;
-		bond_for_each_slave(bond, slave, i) {
+
+		bond_for_each_slave(bond, slave, i)
 			dev_mc_add(slave->dev, addr, alen, 0);
-		}
 	}
 }
 
@@ -846,9 +846,9 @@ static void bond_mc_delete(struct bonding *bond, void *addr, int alen)
 {
 	if (USES_PRIMARY(bond->params.mode)) {
 		/* write lock already acquired */
-		if (bond->curr_active_slave) {
-			dev_mc_delete(bond->curr_active_slave->dev, addr, alen, 0);
-		}
+		if (bond->curr_active_slave)
+			dev_mc_delete(bond->curr_active_slave->dev, addr,
+				      alen, 0);
 	} else {
 		struct slave *slave;
 		int i;
@@ -872,9 +872,8 @@ static void bond_resend_igmp_join_requests(struct bonding *bond)
 	rcu_read_lock();
 	in_dev = __in_dev_get_rcu(bond->dev);
 	if (in_dev) {
-		for (im = in_dev->mc_list; im; im = im->next) {
+		for (im = in_dev->mc_list; im; im = im->next)
 			ip_mc_rejoin_group(im);
-		}
 	}
 
 	rcu_read_unlock();
@@ -893,7 +892,8 @@ static void bond_mc_list_destroy(struct bonding *bond)
 		kfree(dmi);
 		dmi = bond->mc_list;
 	}
-        bond->mc_list = NULL;
+
+	bond->mc_list = NULL;
 }
 
 /*
@@ -926,14 +926,14 @@ static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond,
 /*
  * flush all members of flush->mc_list from device dev->mc_list
  */
-static void bond_mc_list_flush(struct net_device *bond_dev, struct net_device *slave_dev)
+static void bond_mc_list_flush(struct net_device *bond_dev,
+			       struct net_device *slave_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct dev_mc_list *dmi;
 
-	for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
+	for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next)
 		dev_mc_delete(slave_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
-	}
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		/* del lacpdu mc addr from mc list */
@@ -950,44 +950,40 @@ static void bond_mc_list_flush(struct net_device *bond_dev, struct net_device *s
  * old active slaves (if any) according to the multicast mode, and
  * promiscuous flags unconditionally.
  */
-static void bond_mc_swap(struct bonding *bond, struct slave *new_active, struct slave *old_active)
+static void bond_mc_swap(struct bonding *bond, struct slave *new_active,
+			 struct slave *old_active)
 {
 	struct dev_mc_list *dmi;
 
-	if (!USES_PRIMARY(bond->params.mode)) {
+	if (!USES_PRIMARY(bond->params.mode))
 		/* nothing to do -  mc list is already up-to-date on
 		 * all slaves
 		 */
 		return;
-	}
 
 	if (old_active) {
-		if (bond->dev->flags & IFF_PROMISC) {
+		if (bond->dev->flags & IFF_PROMISC)
 			dev_set_promiscuity(old_active->dev, -1);
-		}
 
-		if (bond->dev->flags & IFF_ALLMULTI) {
+		if (bond->dev->flags & IFF_ALLMULTI)
 			dev_set_allmulti(old_active->dev, -1);
-		}
 
-		for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next) {
-			dev_mc_delete(old_active->dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
-		}
+		for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next)
+			dev_mc_delete(old_active->dev, dmi->dmi_addr,
+				      dmi->dmi_addrlen, 0);
 	}
 
 	if (new_active) {
 		/* FIXME: Signal errors upstream. */
-		if (bond->dev->flags & IFF_PROMISC) {
+		if (bond->dev->flags & IFF_PROMISC)
 			dev_set_promiscuity(new_active->dev, 1);
-		}
 
-		if (bond->dev->flags & IFF_ALLMULTI) {
+		if (bond->dev->flags & IFF_ALLMULTI)
 			dev_set_allmulti(new_active->dev, 1);
-		}
 
-		for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next) {
-			dev_mc_add(new_active->dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
-		}
+		for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next)
+			dev_mc_add(new_active->dev, dmi->dmi_addr,
+				   dmi->dmi_addrlen, 0);
 		bond_resend_igmp_join_requests(bond);
 	}
 }
@@ -1041,7 +1037,7 @@ static void bond_do_fail_over_mac(struct bonding *bond,
 
 		rv = dev_set_mac_address(new_active->dev, &saddr);
 		if (rv) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: Error %d setting MAC of slave %s\n",
 			       bond->dev->name, -rv, new_active->dev->name);
 			goto out;
@@ -1055,7 +1051,7 @@ static void bond_do_fail_over_mac(struct bonding *bond,
 
 		rv = dev_set_mac_address(old_active->dev, &saddr);
 		if (rv)
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: Error %d setting MAC of slave %s\n",
 			       bond->dev->name, -rv, new_active->dev->name);
 out:
@@ -1063,7 +1059,7 @@ out:
 		write_lock_bh(&bond->curr_slave_lock);
 		break;
 	default:
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: bond_do_fail_over_mac impossible: bad policy %d\n",
 		       bond->dev->name, bond->params.fail_over_mac);
 		break;
@@ -1088,17 +1084,17 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
 	new_active = old_active = bond->curr_active_slave;
 
 	if (!new_active) { /* there were no active slaves left */
-		if (bond->slave_cnt > 0) {  /* found one slave */
+		if (bond->slave_cnt > 0)   /* found one slave */
 			new_active = bond->first_slave;
-		} else {
+		else
 			return NULL; /* still no slave, return NULL */
-		}
 	}
 
-	/* first try the primary link; if arping, a link must tx/rx traffic
-	 * before it can be considered the curr_active_slave - also, we would skip
-	 * slaves between the curr_active_slave and primary_slave that may be up
-	 * and able to arp
+	/*
+	 * first try the primary link; if arping, a link must tx/rx
+	 * traffic before it can be considered the curr_active_slave.
+	 * also, we would skip slaves between the curr_active_slave
+	 * and primary_slave that may be up and able to arp
 	 */
 	if ((bond->primary_slave) &&
 	    (!bond->params.arp_interval) &&
@@ -1146,16 +1142,15 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 {
 	struct slave *old_active = bond->curr_active_slave;
 
-	if (old_active == new_active) {
+	if (old_active == new_active)
 		return;
-	}
 
 	if (new_active) {
 		new_active->jiffies = jiffies;
 
 		if (new_active->link == BOND_LINK_BACK) {
 			if (USES_PRIMARY(bond->params.mode)) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: making interface %s the new "
 				       "active one %d ms earlier.\n",
 				       bond->dev->name, new_active->dev->name,
@@ -1165,15 +1160,14 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 			new_active->delay = 0;
 			new_active->link = BOND_LINK_UP;
 
-			if (bond->params.mode == BOND_MODE_8023AD) {
+			if (bond->params.mode == BOND_MODE_8023AD)
 				bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
-			}
 
 			if (bond_is_lb(bond))
 				bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
 		} else {
 			if (USES_PRIMARY(bond->params.mode)) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: making interface %s the new "
 				       "active one.\n",
 				       bond->dev->name, new_active->dev->name);
@@ -1181,9 +1175,8 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 		}
 	}
 
-	if (USES_PRIMARY(bond->params.mode)) {
+	if (USES_PRIMARY(bond->params.mode))
 		bond_mc_swap(bond, new_active, old_active);
-	}
 
 	if (bond_is_lb(bond)) {
 		bond_alb_handle_active_change(bond, new_active);
@@ -1196,9 +1189,8 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 	}
 
 	if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
-		if (old_active) {
+		if (old_active)
 			bond_set_slave_inactive_flags(old_active);
-		}
 
 		if (new_active) {
 			bond_set_slave_active_flags(new_active);
@@ -1228,7 +1220,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
  * bond_select_active_slave - select a new active slave, if needed
  * @bond: our bonding struct
  *
- * This functions shoud be called when one of the following occurs:
+ * This functions should be called when one of the following occurs:
  * - The old curr_active_slave has been released or lost its link.
  * - The primary_slave has got its link back.
  * - A slave has got its link back and there's no old curr_active_slave.
@@ -1248,11 +1240,11 @@ void bond_select_active_slave(struct bonding *bond)
 			return;
 
 		if (netif_carrier_ok(bond->dev)) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: first active interface up!\n",
 			       bond->dev->name);
 		} else {
-			printk(KERN_INFO DRV_NAME ": %s: "
+			pr_info(DRV_NAME ": %s: "
 			       "now running without any active interface !\n",
 			       bond->dev->name);
 		}
@@ -1294,13 +1286,11 @@ static void bond_attach_slave(struct bonding *bond, struct slave *new_slave)
  */
 static void bond_detach_slave(struct bonding *bond, struct slave *slave)
 {
-	if (slave->next) {
+	if (slave->next)
 		slave->next->prev = slave->prev;
-	}
 
-	if (slave->prev) {
+	if (slave->prev)
 		slave->prev->next = slave->next;
-	}
 
 	if (bond->first_slave == slave) { /* slave is the first slave */
 		if (bond->slave_cnt > 1) { /* there are more slave */
@@ -1331,7 +1321,7 @@ static int bond_sethwaddr(struct net_device *bond_dev,
 	(NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
 	 NETIF_F_HW_VLAN_FILTER)
 
-/* 
+/*
  * Compute the common dev->feature set available to all slaves.  Some
  * feature bits are managed elsewhere, so preserve those feature bits
  * on the master device.
@@ -1399,14 +1389,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
 		slave_ops->ndo_do_ioctl == NULL) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": %s: Warning: no link monitoring support for %s\n",
 		       bond_dev->name, slave_dev->name);
 	}
 
 	/* bond must be initialized by bond_open() before enslaving */
 	if (!(bond_dev->flags & IFF_UP)) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 			" %s: master_dev is not up in bond_enslave\n",
 			bond_dev->name);
 	}
@@ -1422,14 +1412,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
 		pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
 		if (!list_empty(&bond->vlan_list)) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: Error: cannot enslave VLAN "
 			       "challenged slave %s on VLAN enabled "
 			       "bond %s\n", bond_dev->name, slave_dev->name,
 			       bond_dev->name);
 			return -EPERM;
 		} else {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: enslaved VLAN challenged "
 			       "slave %s. Adding VLANs will be blocked as "
 			       "long as %s is part of bond %s\n",
@@ -1449,12 +1439,12 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	/*
 	 * Old ifenslave binaries are no longer supported.  These can
-	 * be identified with moderate accurary by the state of the slave:
+	 * be identified with moderate accuracy by the state of the slave:
 	 * the current ifenslave will set the interface down prior to
 	 * enslaving it; the old ifenslave will not.
 	 */
 	if ((slave_dev->flags & IFF_UP)) {
-		printk(KERN_ERR DRV_NAME ": %s is up. "
+		pr_err(DRV_NAME ": %s is up. "
 		       "This may be due to an out of date ifenslave.\n",
 		       slave_dev->name);
 		res = -EPERM;
@@ -1472,7 +1462,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		if (slave_dev->type != ARPHRD_ETHER)
 			bond_setup_by_slave(bond_dev, slave_dev);
 	} else if (bond_dev->type != slave_dev->type) {
-		printk(KERN_ERR DRV_NAME ": %s ether type (%d) is different "
+		pr_err(DRV_NAME ": %s ether type (%d) is different "
 			"from other slaves (%d), can not enslave it.\n",
 			slave_dev->name,
 			slave_dev->type, bond_dev->type);
@@ -1482,14 +1472,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	if (slave_ops->ndo_set_mac_address == NULL) {
 		if (bond->slave_cnt == 0) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: The first slave device "
 			       "specified does not support setting the MAC "
 			       "address. Setting fail_over_mac to active.",
 			       bond_dev->name);
 			bond->params.fail_over_mac = BOND_FOM_ACTIVE;
 		} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 				": %s: Error: The slave device specified "
 				"does not support setting the MAC address, "
 				"but fail_over_mac is not set to active.\n"
@@ -1539,7 +1529,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	/* open the slave since the application closed it */
 	res = dev_open(slave_dev);
 	if (res) {
-		pr_debug("Openning slave %s failed\n", slave_dev->name);
+		pr_debug("Opening slave %s failed\n", slave_dev->name);
 		goto err_unset_master;
 	}
 
@@ -1551,9 +1541,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		 * it might fail and we do not want to have to undo everything
 		 */
 		res = bond_alb_init_slave(bond, new_slave);
-		if (res) {
+		if (res)
 			goto err_close;
-		}
 	}
 
 	/* If the mode USES_PRIMARY, then the new slave gets the
@@ -1578,9 +1567,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 		netif_addr_lock_bh(bond_dev);
 		/* upload master's mc_list to new slave */
-		for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
-			dev_mc_add (slave_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
-		}
+		for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next)
+			dev_mc_add(slave_dev, dmi->dmi_addr,
+				   dmi->dmi_addrlen, 0);
 		netif_addr_unlock_bh(bond_dev);
 	}
 
@@ -1621,7 +1610,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 			 * supported); thus, we don't need to change
 			 * the messages for netif_carrier.
 			 */
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: MII and ETHTOOL support not "
 			       "available for interface %s, and "
 			       "arp_interval/arp_ip_target module parameters "
@@ -1630,7 +1619,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 			       bond_dev->name, slave_dev->name);
 		} else if (link_reporting == -1) {
 			/* unable get link status using mii/ethtool */
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: can't get link status from "
 			       "interface %s; the network driver associated "
 			       "with this interface does not support MII or "
@@ -1662,13 +1651,13 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	if (bond_update_speed_duplex(new_slave) &&
 	    (new_slave->link != BOND_LINK_DOWN)) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": %s: Warning: failed to get speed and duplex from %s, "
 		       "assumed to be 100Mb/sec and Full.\n",
 		       bond_dev->name, new_slave->dev->name);
 
 		if (bond->params.mode == BOND_MODE_8023AD) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
 			       "support in base driver for proper aggregator "
 			       "selection.\n", bond_dev->name);
@@ -1677,9 +1666,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
 		/* if there is a primary slave, remember it */
-		if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
+		if (strcmp(bond->params.primary, new_slave->dev->name) == 0)
 			bond->primary_slave = new_slave;
-		}
 	}
 
 	write_lock_bh(&bond->curr_slave_lock);
@@ -1726,9 +1714,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		 * anyway (it holds no special properties of the bond device),
 		 * so we can change it without calling change_active_interface()
 		 */
-		if (!bond->curr_active_slave) {
+		if (!bond->curr_active_slave)
 			bond->curr_active_slave = new_slave;
-		}
+
 		break;
 	} /* switch(bond_mode) */
 
@@ -1742,7 +1730,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 	if (res)
 		goto err_close;
 
-	printk(KERN_INFO DRV_NAME
+	pr_info(DRV_NAME
 	       ": %s: enslaving %s as a%s interface with a%s link.\n",
 	       bond_dev->name, slave_dev->name,
 	       new_slave->state == BOND_STATE_ACTIVE ? "n active" : " backup",
@@ -1774,7 +1762,7 @@ err_free:
 
 err_undo_flags:
 	bond_dev->features = old_features;
- 
+
 	return res;
 }
 
@@ -1799,7 +1787,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	/* slave is not a slave or master is not master of this slave */
 	if (!(slave_dev->flags & IFF_SLAVE) ||
 	    (slave_dev->master != bond_dev)) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Error: cannot release %s.\n",
 		       bond_dev->name, slave_dev->name);
 		return -EINVAL;
@@ -1810,7 +1798,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	slave = bond_get_slave_by_dev(bond, slave_dev);
 	if (!slave) {
 		/* not a slave of this bond */
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: %s not enslaved\n",
 		       bond_dev->name, slave_dev->name);
 		write_unlock_bh(&bond->lock);
@@ -1821,7 +1809,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		mac_addr_differ = memcmp(bond_dev->dev_addr, slave->perm_hwaddr,
 					 ETH_ALEN);
 		if (!mac_addr_differ && (bond->slave_cnt > 1))
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: the permanent HWaddr of %s - "
 			       "%pM - is still in use by %s. "
 			       "Set the HWaddr of %s to a different address "
@@ -1839,7 +1827,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		bond_3ad_unbind_slave(slave);
 	}
 
-	printk(KERN_INFO DRV_NAME
+	pr_info(DRV_NAME
 	       ": %s: releasing %s interface %s\n",
 	       bond_dev->name,
 	       (slave->state == BOND_STATE_ACTIVE)
@@ -1855,13 +1843,11 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	bond_compute_features(bond);
 
-	if (bond->primary_slave == slave) {
+	if (bond->primary_slave == slave)
 		bond->primary_slave = NULL;
-	}
 
-	if (oldcurrent == slave) {
+	if (oldcurrent == slave)
 		bond_change_active_slave(bond, NULL);
-	}
 
 	if (bond_is_lb(bond)) {
 		/* Must be called only after the slave has been
@@ -1903,18 +1889,18 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		if (list_empty(&bond->vlan_list)) {
 			bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
 		} else {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: Warning: clearing HW address of %s while it "
 			       "still has VLANs.\n",
 			       bond_dev->name, bond_dev->name);
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": %s: When re-adding slaves, make sure the bond's "
 			       "HW address matches its VLANs'.\n",
 			       bond_dev->name);
 		}
 	} else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
 		   !bond_has_challenged_slaves(bond)) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: last VLAN challenged slave %s "
 		       "left bond %s. VLAN blocking is removed\n",
 		       bond_dev->name, slave_dev->name, bond_dev->name);
@@ -1934,14 +1920,12 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	 */
 	if (!USES_PRIMARY(bond->params.mode)) {
 		/* unset promiscuity level from slave */
-		if (bond_dev->flags & IFF_PROMISC) {
+		if (bond_dev->flags & IFF_PROMISC)
 			dev_set_promiscuity(slave_dev, -1);
-		}
 
 		/* unset allmulti level from slave */
-		if (bond_dev->flags & IFF_ALLMULTI) {
+		if (bond_dev->flags & IFF_ALLMULTI)
 			dev_set_allmulti(slave_dev, -1);
-		}
 
 		/* flush master's mc_list from slave */
 		netif_addr_lock_bh(bond_dev);
@@ -1974,41 +1958,36 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 * Destroy a bonding device.
 * Must be under rtnl_lock when this function is called.
 */
-void bond_destroy(struct bonding *bond)
-{
-	bond_deinit(bond->dev);
-	bond_destroy_sysfs_entry(bond);
-	unregister_netdevice(bond->dev);
-}
-
-static void bond_destructor(struct net_device *bond_dev)
+static void bond_uninit(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 
+	bond_deinit(bond_dev);
+	bond_destroy_sysfs_entry(bond);
+
 	if (bond->wq)
 		destroy_workqueue(bond->wq);
 
 	netif_addr_lock_bh(bond_dev);
 	bond_mc_list_destroy(bond);
 	netif_addr_unlock_bh(bond_dev);
-
-	free_netdev(bond_dev);
 }
 
 /*
-* First release a slave and than destroy the bond if no more slaves iare left.
+* First release a slave and than destroy the bond if no more slaves are left.
 * Must be under rtnl_lock when this function is called.
 */
-int  bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev)
+int  bond_release_and_destroy(struct net_device *bond_dev,
+			      struct net_device *slave_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	int ret;
 
 	ret = bond_release(bond_dev, slave_dev);
 	if ((ret == 0) && (bond->slave_cnt == 0)) {
-		printk(KERN_INFO DRV_NAME ": %s: destroying bond %s.\n",
+		pr_info(DRV_NAME ": %s: destroying bond %s.\n",
 		       bond_dev->name, bond_dev->name);
-		bond_destroy(bond);
+		unregister_netdevice(bond_dev);
 	}
 	return ret;
 }
@@ -2027,9 +2006,8 @@ static int bond_release_all(struct net_device *bond_dev)
 
 	netif_carrier_off(bond_dev);
 
-	if (bond->slave_cnt == 0) {
+	if (bond->slave_cnt == 0)
 		goto out;
-	}
 
 	bond->current_arp_slave = NULL;
 	bond->primary_slave = NULL;
@@ -2039,9 +2017,8 @@ static int bond_release_all(struct net_device *bond_dev)
 		/* Inform AD package of unbinding of slave
 		 * before slave is detached from the list.
 		 */
-		if (bond->params.mode == BOND_MODE_8023AD) {
+		if (bond->params.mode == BOND_MODE_8023AD)
 			bond_3ad_unbind_slave(slave);
-		}
 
 		slave_dev = slave->dev;
 		bond_detach_slave(bond, slave);
@@ -2070,14 +2047,12 @@ static int bond_release_all(struct net_device *bond_dev)
 		 */
 		if (!USES_PRIMARY(bond->params.mode)) {
 			/* unset promiscuity level from slave */
-			if (bond_dev->flags & IFF_PROMISC) {
+			if (bond_dev->flags & IFF_PROMISC)
 				dev_set_promiscuity(slave_dev, -1);
-			}
 
 			/* unset allmulti level from slave */
-			if (bond_dev->flags & IFF_ALLMULTI) {
+			if (bond_dev->flags & IFF_ALLMULTI)
 				dev_set_allmulti(slave_dev, -1);
-			}
 
 			/* flush master's mc_list from slave */
 			netif_addr_lock_bh(bond_dev);
@@ -2112,20 +2087,20 @@ static int bond_release_all(struct net_device *bond_dev)
 	 */
 	memset(bond_dev->dev_addr, 0, bond_dev->addr_len);
 
-	if (list_empty(&bond->vlan_list)) {
+	if (list_empty(&bond->vlan_list))
 		bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
-	} else {
-		printk(KERN_WARNING DRV_NAME
+	else {
+		pr_warning(DRV_NAME
 		       ": %s: Warning: clearing HW address of %s while it "
 		       "still has VLANs.\n",
 		       bond_dev->name, bond_dev->name);
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": %s: When re-adding slaves, make sure the bond's "
 		       "HW address matches its VLANs'.\n",
 		       bond_dev->name);
 	}
 
-	printk(KERN_INFO DRV_NAME
+	pr_info(DRV_NAME
 	       ": %s: released all slaves\n",
 	       bond_dev->name);
 
@@ -2143,8 +2118,8 @@ out:
  *  - <slave_dev> is already active.
  *  - The link state of <slave_dev> is not BOND_LINK_UP.
  *  - <slave_dev> is not running.
- * In these cases, this fuction does nothing.
- * In the other cases, currnt_slave pointer is changed and 0 is returned.
+ * In these cases, this function does nothing.
+ * In the other cases, current_slave pointer is changed and 0 is returned.
  */
 static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev)
 {
@@ -2153,15 +2128,12 @@ static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_devi
 	struct slave *new_active = NULL;
 	int res = 0;
 
-	if (!USES_PRIMARY(bond->params.mode)) {
+	if (!USES_PRIMARY(bond->params.mode))
 		return -EINVAL;
-	}
 
 	/* Verify that master_dev is indeed the master of slave_dev */
-	if (!(slave_dev->flags & IFF_SLAVE) ||
-	    (slave_dev->master != bond_dev)) {
+	if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev))
 		return -EINVAL;
-	}
 
 	read_lock(&bond->lock);
 
@@ -2186,9 +2158,8 @@ static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_devi
 		write_lock_bh(&bond->curr_slave_lock);
 		bond_change_active_slave(bond, new_active);
 		write_unlock_bh(&bond->curr_slave_lock);
-	} else {
+	} else
 		res = -EINVAL;
-	}
 
 	read_unlock(&bond->lock);
 
@@ -2240,6 +2211,9 @@ static int bond_miimon_inspect(struct bonding *bond)
 {
 	struct slave *slave;
 	int i, link_state, commit = 0;
+	bool ignore_updelay;
+
+	ignore_updelay = !bond->curr_active_slave ? true : false;
 
 	bond_for_each_slave(bond, slave, i) {
 		slave->new_link = BOND_LINK_NOCHANGE;
@@ -2254,7 +2228,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 			slave->link = BOND_LINK_FAIL;
 			slave->delay = bond->params.downdelay;
 			if (slave->delay) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status down for %s"
 				       "interface %s, disabling it in %d ms.\n",
 				       bond->dev->name,
@@ -2273,7 +2247,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 				 */
 				slave->link = BOND_LINK_UP;
 				slave->jiffies = jiffies;
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status up again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
@@ -2300,10 +2274,11 @@ static int bond_miimon_inspect(struct bonding *bond)
 			slave->delay = bond->params.updelay;
 
 			if (slave->delay) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status up for "
 				       "interface %s, enabling it in %d ms.\n",
 				       bond->dev->name, slave->dev->name,
+				       ignore_updelay ? 0 :
 				       bond->params.updelay *
 				       bond->params.miimon);
 			}
@@ -2311,7 +2286,7 @@ static int bond_miimon_inspect(struct bonding *bond)
 		case BOND_LINK_BACK:
 			if (!link_state) {
 				slave->link = BOND_LINK_DOWN;
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status down again after %d "
 				       "ms for interface %s.\n",
 				       bond->dev->name,
@@ -2322,9 +2297,13 @@ static int bond_miimon_inspect(struct bonding *bond)
 				continue;
 			}
 
+			if (ignore_updelay)
+				slave->delay = 0;
+
 			if (slave->delay <= 0) {
 				slave->new_link = BOND_LINK_UP;
 				commit++;
+				ignore_updelay = false;
 				continue;
 			}
 
@@ -2361,7 +2340,7 @@ static void bond_miimon_commit(struct bonding *bond)
 				slave->state = BOND_STATE_BACKUP;
 			}
 
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: link status definitely "
 			       "up for interface %s.\n",
 			       bond->dev->name, slave->dev->name);
@@ -2390,7 +2369,7 @@ static void bond_miimon_commit(struct bonding *bond)
 			    bond->params.mode == BOND_MODE_8023AD)
 				bond_set_slave_inactive_flags(slave);
 
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: link status definitely down for "
 			       "interface %s, disabling it\n",
 			       bond->dev->name, slave->dev->name);
@@ -2399,8 +2378,7 @@ static void bond_miimon_commit(struct bonding *bond)
 				bond_3ad_handle_link_change(slave,
 							    BOND_LINK_DOWN);
 
-			if (bond->params.mode == BOND_MODE_TLB ||
-			    bond->params.mode == BOND_MODE_ALB)
+			if (bond_is_lb(bond))
 				bond_alb_handle_link_change(bond, slave,
 							    BOND_LINK_DOWN);
 
@@ -2410,7 +2388,7 @@ static void bond_miimon_commit(struct bonding *bond)
 			continue;
 
 		default:
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: invalid new link %d on slave %s\n",
 			       bond->dev->name, slave->new_link,
 			       slave->dev->name);
@@ -2531,18 +2509,18 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_
 
 	pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
 	       slave_dev->name, dest_ip, src_ip, vlan_id);
-	       
+
 	skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
 			 NULL, slave_dev->dev_addr, NULL);
 
 	if (!skb) {
-		printk(KERN_ERR DRV_NAME ": ARP packet allocation failed\n");
+		pr_err(DRV_NAME ": ARP packet allocation failed\n");
 		return;
 	}
 	if (vlan_id) {
 		skb = vlan_put_tag(skb, vlan_id);
 		if (!skb) {
-			printk(KERN_ERR DRV_NAME ": failed to insert VLAN tag\n");
+			pr_err(DRV_NAME ": failed to insert VLAN tag\n");
 			return;
 		}
 	}
@@ -2582,7 +2560,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		rv = ip_route_output_key(&init_net, &rt, &fl);
 		if (rv) {
 			if (net_ratelimit()) {
-				printk(KERN_WARNING DRV_NAME
+				pr_warning(DRV_NAME
 			     ": %s: no route to arp_ip_target %pI4\n",
 				       bond->dev->name, &fl.fl4_dst);
 			}
@@ -2619,7 +2597,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 		}
 
 		if (net_ratelimit()) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 	       ": %s: no path to arp_ip_target %pI4 via rt.dev %s\n",
 			       bond->dev->name, &fl.fl4_dst,
 			       rt->u.dst.dev ? rt->u.dst.dev->name : "NULL");
@@ -2767,13 +2745,11 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 
 	delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
 
-	if (bond->kill_timers) {
+	if (bond->kill_timers)
 		goto out;
-	}
 
-	if (bond->slave_cnt == 0) {
+	if (bond->slave_cnt == 0)
 		goto re_arm;
-	}
 
 	read_lock(&bond->curr_slave_lock);
 	oldcurrent = bond->curr_active_slave;
@@ -2789,7 +2765,7 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 	 */
 	bond_for_each_slave(bond, slave, i) {
 		if (slave->link != BOND_LINK_UP) {
-			if (time_before_eq(jiffies, slave->dev->trans_start + delta_in_ticks) &&
+			if (time_before_eq(jiffies, dev_trans_start(slave->dev) + delta_in_ticks) &&
 			    time_before_eq(jiffies, slave->dev->last_rx + delta_in_ticks)) {
 
 				slave->link  = BOND_LINK_UP;
@@ -2801,14 +2777,14 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 				 * is closed.
 				 */
 				if (!oldcurrent) {
-					printk(KERN_INFO DRV_NAME
+					pr_info(DRV_NAME
 					       ": %s: link status definitely "
 					       "up for interface %s, ",
 					       bond->dev->name,
 					       slave->dev->name);
 					do_failover = 1;
 				} else {
-					printk(KERN_INFO DRV_NAME
+					pr_info(DRV_NAME
 					       ": %s: interface %s is now up\n",
 					       bond->dev->name,
 					       slave->dev->name);
@@ -2821,24 +2797,22 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 			 * when the source ip is 0, so don't take the link down
 			 * if we don't know our ip yet
 			 */
-			if (time_after_eq(jiffies, slave->dev->trans_start + 2*delta_in_ticks) ||
+			if (time_after_eq(jiffies, dev_trans_start(slave->dev) + 2*delta_in_ticks) ||
 			    (time_after_eq(jiffies, slave->dev->last_rx + 2*delta_in_ticks))) {
 
 				slave->link  = BOND_LINK_DOWN;
 				slave->state = BOND_STATE_BACKUP;
 
-				if (slave->link_failure_count < UINT_MAX) {
+				if (slave->link_failure_count < UINT_MAX)
 					slave->link_failure_count++;
-				}
 
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: interface %s is now down.\n",
 				       bond->dev->name,
 				       slave->dev->name);
 
-				if (slave == oldcurrent) {
+				if (slave == oldcurrent)
 					do_failover = 1;
-				}
 			}
 		}
 
@@ -2849,9 +2823,8 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
 		 * do - all replies will be rx'ed on same link causing slaves
 		 * to be unstable during low/no traffic periods
 		 */
-		if (IS_UP(slave->dev)) {
+		if (IS_UP(slave->dev))
 			bond_arp_send_all(bond, slave);
-		}
 	}
 
 	if (do_failover) {
@@ -2932,7 +2905,7 @@ static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
 		 *    the bond has an IP address)
 		 */
 		if ((slave->state == BOND_STATE_ACTIVE) &&
-		    (time_after_eq(jiffies, slave->dev->trans_start +
+		    (time_after_eq(jiffies, dev_trans_start(slave->dev) +
 				    2 * delta_in_ticks) ||
 		      (time_after_eq(jiffies, slave_last_rx(bond, slave)
 				     + 2 * delta_in_ticks)))) {
@@ -2976,13 +2949,13 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 			write_lock_bh(&bond->curr_slave_lock);
 
 			if (!bond->curr_active_slave &&
-			    time_before_eq(jiffies, slave->dev->trans_start +
+			    time_before_eq(jiffies, dev_trans_start(slave->dev) +
 					   delta_in_ticks)) {
 				slave->link = BOND_LINK_UP;
 				bond_change_active_slave(bond, slave);
 				bond->current_arp_slave = NULL;
 
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: %s is up and now the "
 				       "active interface\n",
 				       bond->dev->name, slave->dev->name);
@@ -2998,7 +2971,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 				bond_set_slave_inactive_flags(slave);
 				bond->current_arp_slave = NULL;
 
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: backup interface %s is now up\n",
 				       bond->dev->name, slave->dev->name);
 			}
@@ -3014,7 +2987,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 			slave->link = BOND_LINK_DOWN;
 
 			if (slave == bond->curr_active_slave) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: link status down for active "
 				       "interface %s, disabling it\n",
 				       bond->dev->name, slave->dev->name);
@@ -3033,7 +3006,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 				bond->current_arp_slave = NULL;
 
 			} else if (slave->state == BOND_STATE_BACKUP) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: backup interface %s is now down\n",
 				       bond->dev->name, slave->dev->name);
 
@@ -3042,7 +3015,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
 			break;
 
 		default:
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: impossible: new_link %d on slave %s\n",
 			       bond->dev->name, slave->new_link,
 			       slave->dev->name);
@@ -3076,7 +3049,7 @@ static void bond_ab_arp_probe(struct bonding *bond)
 	read_lock(&bond->curr_slave_lock);
 
 	if (bond->current_arp_slave && bond->curr_active_slave)
-		printk("PROBE: c_arp %s && cas %s BAD\n",
+		pr_info(DRV_NAME "PROBE: c_arp %s && cas %s BAD\n",
 		       bond->current_arp_slave->dev->name,
 		       bond->curr_active_slave->dev->name);
 
@@ -3126,7 +3099,7 @@ static void bond_ab_arp_probe(struct bonding *bond)
 
 			bond_set_slave_inactive_flags(slave);
 
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: backup interface %s is now down.\n",
 			       bond->dev->name, slave->dev->name);
 		}
@@ -3176,9 +3149,8 @@ void bond_activebackup_arp_mon(struct work_struct *work)
 	bond_ab_arp_probe(bond);
 
 re_arm:
-	if (bond->params.arp_interval) {
+	if (bond->params.arp_interval)
 		queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
-	}
 out:
 	read_unlock(&bond->lock);
 }
@@ -3200,14 +3172,12 @@ static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
 	read_lock(&dev_base_lock);
 	read_lock(&bond->lock);
 
-	if (*pos == 0) {
+	if (*pos == 0)
 		return SEQ_START_TOKEN;
-	}
 
 	bond_for_each_slave(bond, slave, i) {
-		if (++off == *pos) {
+		if (++off == *pos)
 			return slave;
-		}
 	}
 
 	return NULL;
@@ -3219,9 +3189,8 @@ static void *bond_info_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	struct slave *slave = v;
 
 	++*pos;
-	if (v == SEQ_START_TOKEN) {
+	if (v == SEQ_START_TOKEN)
 		return bond->first_slave;
-	}
 
 	slave = slave->next;
 
@@ -3284,14 +3253,14 @@ static void bond_info_show_master(struct seq_file *seq)
 
 
 	/* ARP information */
-	if(bond->params.arp_interval > 0) {
-		int printed=0;
+	if (bond->params.arp_interval > 0) {
+		int printed = 0;
 		seq_printf(seq, "ARP Polling Interval (ms): %d\n",
 				bond->params.arp_interval);
 
 		seq_printf(seq, "ARP IP target/s (n.n.n.n form):");
 
-		for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
+		for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
 			if (!bond->params.arp_targets[i])
 				break;
 			if (printed)
@@ -3331,7 +3300,8 @@ static void bond_info_show_master(struct seq_file *seq)
 	}
 }
 
-static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave)
+static void bond_info_show_slave(struct seq_file *seq,
+				 const struct slave *slave)
 {
 	struct bonding *bond = seq->private;
 
@@ -3347,12 +3317,11 @@ static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave
 		const struct aggregator *agg
 			= SLAVE_AD_INFO(slave).port.aggregator;
 
-		if (agg) {
+		if (agg)
 			seq_printf(seq, "Aggregator ID: %d\n",
 				   agg->aggregator_identifier);
-		} else {
+		else
 			seq_puts(seq, "Aggregator ID: N/A\n");
-		}
 	}
 }
 
@@ -3361,9 +3330,8 @@ static int bond_info_seq_show(struct seq_file *seq, void *v)
 	if (v == SEQ_START_TOKEN) {
 		seq_printf(seq, "%s\n", version);
 		bond_info_show_master(seq);
-	} else {
+	} else
 		bond_info_show_slave(seq, v);
-	}
 
 	return 0;
 }
@@ -3408,13 +3376,12 @@ static int bond_create_proc_entry(struct bonding *bond)
 		bond->proc_entry = proc_create_data(bond_dev->name,
 						    S_IRUGO, bond_proc_dir,
 						    &bond_info_fops, bond);
-		if (bond->proc_entry == NULL) {
-			printk(KERN_WARNING DRV_NAME
+		if (bond->proc_entry == NULL)
+			pr_warning(DRV_NAME
 			       ": Warning: Cannot create /proc/net/%s/%s\n",
 			       DRV_NAME, bond_dev->name);
-		} else {
+		else
 			memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
-		}
 	}
 
 	return 0;
@@ -3437,7 +3404,7 @@ static void bond_create_proc_dir(void)
 	if (!bond_proc_dir) {
 		bond_proc_dir = proc_mkdir(DRV_NAME, init_net.proc_net);
 		if (!bond_proc_dir)
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 				": Warning: cannot create /proc/net/%s\n",
 				DRV_NAME);
 	}
@@ -3453,8 +3420,28 @@ static void bond_destroy_proc_dir(void)
 		bond_proc_dir = NULL;
 	}
 }
+
+#else /* !CONFIG_PROC_FS */
+
+static int bond_create_proc_entry(struct bonding *bond)
+{
+}
+
+static void bond_remove_proc_entry(struct bonding *bond)
+{
+}
+
+static void bond_create_proc_dir(void)
+{
+}
+
+static void bond_destroy_proc_dir(void)
+{
+}
+
 #endif /* CONFIG_PROC_FS */
 
+
 /*-------------------------- netdev event handling --------------------------*/
 
 /*
@@ -3462,18 +3449,17 @@ static void bond_destroy_proc_dir(void)
  */
 static int bond_event_changename(struct bonding *bond)
 {
-#ifdef CONFIG_PROC_FS
 	bond_remove_proc_entry(bond);
 	bond_create_proc_entry(bond);
-#endif
-	down_write(&(bonding_rwsem));
-        bond_destroy_sysfs_entry(bond);
-        bond_create_sysfs_entry(bond);
-	up_write(&(bonding_rwsem));
+
+	bond_destroy_sysfs_entry(bond);
+	bond_create_sysfs_entry(bond);
+
 	return NOTIFY_DONE;
 }
 
-static int bond_master_netdev_event(unsigned long event, struct net_device *bond_dev)
+static int bond_master_netdev_event(unsigned long event,
+				    struct net_device *bond_dev)
 {
 	struct bonding *event_bond = netdev_priv(bond_dev);
 
@@ -3490,7 +3476,8 @@ static int bond_master_netdev_event(unsigned long event, struct net_device *bond
 	return NOTIFY_DONE;
 }
 
-static int bond_slave_netdev_event(unsigned long event, struct net_device *slave_dev)
+static int bond_slave_netdev_event(unsigned long event,
+				   struct net_device *slave_dev)
 {
 	struct net_device *bond_dev = slave_dev->master;
 	struct bonding *bond = netdev_priv(bond_dev);
@@ -3568,7 +3555,8 @@ static int bond_slave_netdev_event(unsigned long event, struct net_device *slave
  * locks for us to safely manipulate the slave devices (RTNL lock,
  * dev_probe_lock).
  */
-static int bond_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
+static int bond_netdev_event(struct notifier_block *this,
+			     unsigned long event, void *ptr)
 {
 	struct net_device *event_dev = (struct net_device *)ptr;
 
@@ -3923,9 +3911,9 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 	switch (cmd) {
 	case SIOCGMIIPHY:
 		mii = if_mii(ifr);
-		if (!mii) {
+		if (!mii)
 			return -EINVAL;
-		}
+
 		mii->phy_id = 0;
 		/* Fall Through */
 	case SIOCGMIIREG:
@@ -3934,18 +3922,18 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 		 * instead of SIOCGMIIPHY.
 		 */
 		mii = if_mii(ifr);
-		if (!mii) {
+		if (!mii)
 			return -EINVAL;
-		}
+
 
 		if (mii->reg_num == 1) {
 			struct bonding *bond = netdev_priv(bond_dev);
 			mii->val_out = 0;
 			read_lock(&bond->lock);
 			read_lock(&bond->curr_slave_lock);
-			if (netif_carrier_ok(bond->dev)) {
+			if (netif_carrier_ok(bond->dev))
 				mii->val_out = BMSR_LSTATUS;
-			}
+
 			read_unlock(&bond->curr_slave_lock);
 			read_unlock(&bond->lock);
 		}
@@ -3955,32 +3943,26 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 	case SIOCBONDINFOQUERY:
 		u_binfo = (struct ifbond __user *)ifr->ifr_data;
 
-		if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond))) {
+		if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
 			return -EFAULT;
-		}
 
 		res = bond_info_query(bond_dev, &k_binfo);
-		if (res == 0) {
-			if (copy_to_user(u_binfo, &k_binfo, sizeof(ifbond))) {
-				return -EFAULT;
-			}
-		}
+		if (res == 0 &&
+		    copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
+			return -EFAULT;
 
 		return res;
 	case BOND_SLAVE_INFO_QUERY_OLD:
 	case SIOCBONDSLAVEINFOQUERY:
 		u_sinfo = (struct ifslave __user *)ifr->ifr_data;
 
-		if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave))) {
+		if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
 			return -EFAULT;
-		}
 
 		res = bond_slave_info_query(bond_dev, &k_sinfo);
-		if (res == 0) {
-			if (copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave))) {
-				return -EFAULT;
-			}
-		}
+		if (res == 0 &&
+		    copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
+			return -EFAULT;
 
 		return res;
 	default:
@@ -3988,18 +3970,16 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 		break;
 	}
 
-	if (!capable(CAP_NET_ADMIN)) {
+	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
-	}
 
-	down_write(&(bonding_rwsem));
 	slave_dev = dev_get_by_name(&init_net, ifr->ifr_slave);
 
 	pr_debug("slave_dev=%p: \n", slave_dev);
 
-	if (!slave_dev) {
+	if (!slave_dev)
 		res = -ENODEV;
-	} else {
+	else {
 		pr_debug("slave_dev->name=%s: \n", slave_dev->name);
 		switch (cmd) {
 		case BOND_ENSLAVE_OLD:
@@ -4025,7 +4005,6 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
 		dev_put(slave_dev);
 	}
 
-	up_write(&(bonding_rwsem));
 	return res;
 }
 
@@ -4037,30 +4016,30 @@ static void bond_set_multicast_list(struct net_device *bond_dev)
 	/*
 	 * Do promisc before checking multicast_mode
 	 */
-	if ((bond_dev->flags & IFF_PROMISC) && !(bond->flags & IFF_PROMISC)) {
+	if ((bond_dev->flags & IFF_PROMISC) && !(bond->flags & IFF_PROMISC))
 		/*
 		 * FIXME: Need to handle the error when one of the multi-slaves
 		 * encounters error.
 		 */
 		bond_set_promiscuity(bond, 1);
-	}
 
-	if (!(bond_dev->flags & IFF_PROMISC) && (bond->flags & IFF_PROMISC)) {
+
+	if (!(bond_dev->flags & IFF_PROMISC) && (bond->flags & IFF_PROMISC))
 		bond_set_promiscuity(bond, -1);
-	}
+
 
 	/* set allmulti flag to slaves */
-	if ((bond_dev->flags & IFF_ALLMULTI) && !(bond->flags & IFF_ALLMULTI)) {
+	if ((bond_dev->flags & IFF_ALLMULTI) && !(bond->flags & IFF_ALLMULTI))
 		/*
 		 * FIXME: Need to handle the error when one of the multi-slaves
 		 * encounters error.
 		 */
 		bond_set_allmulti(bond, 1);
-	}
 
-	if (!(bond_dev->flags & IFF_ALLMULTI) && (bond->flags & IFF_ALLMULTI)) {
+
+	if (!(bond_dev->flags & IFF_ALLMULTI) && (bond->flags & IFF_ALLMULTI))
 		bond_set_allmulti(bond, -1);
-	}
+
 
 	read_lock(&bond->lock);
 
@@ -4068,16 +4047,14 @@ static void bond_set_multicast_list(struct net_device *bond_dev)
 
 	/* looking for addresses to add to slaves' mc list */
 	for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
-		if (!bond_mc_list_find_dmi(dmi, bond->mc_list)) {
+		if (!bond_mc_list_find_dmi(dmi, bond->mc_list))
 			bond_mc_add(bond, dmi->dmi_addr, dmi->dmi_addrlen);
-		}
 	}
 
 	/* looking for addresses to delete from slaves' list */
 	for (dmi = bond->mc_list; dmi; dmi = dmi->next) {
-		if (!bond_mc_list_find_dmi(dmi, bond_dev->mc_list)) {
+		if (!bond_mc_list_find_dmi(dmi, bond_dev->mc_list))
 			bond_mc_delete(bond, dmi->dmi_addr, dmi->dmi_addrlen);
-		}
 	}
 
 	/* save master's multicast list */
@@ -4197,9 +4174,8 @@ static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
 	if (bond->params.fail_over_mac == BOND_FOM_ACTIVE)
 		return 0;
 
-	if (!is_valid_ether_addr(sa->sa_data)) {
+	if (!is_valid_ether_addr(sa->sa_data))
 		return -EADDRNOTAVAIL;
-	}
 
 	/* Can't hold bond->lock with bh disabled here since
 	 * some base drivers panic. On the other hand we can't
@@ -4270,9 +4246,8 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev
 
 	read_lock(&bond->lock);
 
-	if (!BOND_IS_OK(bond)) {
+	if (!BOND_IS_OK(bond))
 		goto out;
-	}
 
 	/*
 	 * Concurrent TX may collide on rr_tx_counter; we accept that
@@ -4282,9 +4257,8 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev
 
 	bond_for_each_slave(bond, slave, i) {
 		slave_no--;
-		if (slave_no < 0) {
+		if (slave_no < 0)
 			break;
-		}
 	}
 
 	start_at = slave;
@@ -4319,9 +4293,8 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d
 	read_lock(&bond->lock);
 	read_lock(&bond->curr_slave_lock);
 
-	if (!BOND_IS_OK(bond)) {
+	if (!BOND_IS_OK(bond))
 		goto out;
-	}
 
 	if (!bond->curr_active_slave)
 		goto out;
@@ -4329,10 +4302,10 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d
 	res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev);
 
 out:
-	if (res) {
+	if (res)
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
-	}
+
 	read_unlock(&bond->curr_slave_lock);
 	read_unlock(&bond->lock);
 	return 0;
@@ -4353,17 +4326,15 @@ static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
 
 	read_lock(&bond->lock);
 
-	if (!BOND_IS_OK(bond)) {
+	if (!BOND_IS_OK(bond))
 		goto out;
-	}
 
 	slave_no = bond->xmit_hash_policy(skb, bond_dev, bond->slave_cnt);
 
 	bond_for_each_slave(bond, slave, i) {
 		slave_no--;
-		if (slave_no < 0) {
+		if (slave_no < 0)
 			break;
-		}
 	}
 
 	start_at = slave;
@@ -4399,17 +4370,15 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 
 	read_lock(&bond->lock);
 
-	if (!BOND_IS_OK(bond)) {
+	if (!BOND_IS_OK(bond))
 		goto out;
-	}
 
 	read_lock(&bond->curr_slave_lock);
 	start_at = bond->curr_active_slave;
 	read_unlock(&bond->curr_slave_lock);
 
-	if (!start_at) {
+	if (!start_at)
 		goto out;
-	}
 
 	bond_for_each_slave_from(bond, slave, i, start_at) {
 		if (IS_UP(slave->dev) &&
@@ -4418,7 +4387,7 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 			if (tx_dev) {
 				struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
 				if (!skb2) {
-					printk(KERN_ERR DRV_NAME
+					pr_err(DRV_NAME
 					       ": %s: Error: bond_xmit_broadcast(): "
 					       "skb_clone() failed\n",
 					       bond_dev->name);
@@ -4435,15 +4404,14 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
 		}
 	}
 
-	if (tx_dev) {
+	if (tx_dev)
 		res = bond_dev_queue_xmit(bond, skb, tx_dev);
-	}
 
 out:
-	if (res) {
+	if (res)
 		/* no suitable interface, frame not sent */
 		dev_kfree_skb(skb);
-	}
+
 	/* frame sent to all suitable interfaces */
 	read_unlock(&bond->lock);
 	return 0;
@@ -4487,7 +4455,7 @@ static int bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		return bond_alb_xmit(skb, dev);
 	default:
 		/* Should never happen, mode already checked */
-		printk(KERN_ERR DRV_NAME ": %s: Error: Unknown bonding mode %d\n",
+		pr_err(DRV_NAME ": %s: Error: Unknown bonding mode %d\n",
 		     dev->name, bond->params.mode);
 		WARN_ON_ONCE(1);
 		dev_kfree_skb(skb);
@@ -4524,7 +4492,7 @@ void bond_set_mode_ops(struct bonding *bond, int mode)
 		break;
 	default:
 		/* Should never happen, mode already checked */
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Error: Unknown bonding mode %d\n",
 		       bond_dev->name,
 		       mode);
@@ -4551,6 +4519,8 @@ static const struct ethtool_ops bond_ethtool_ops = {
 };
 
 static const struct net_device_ops bond_netdev_ops = {
+	.ndo_init		= bond_init,
+	.ndo_uninit		= bond_uninit,
 	.ndo_open		= bond_open,
 	.ndo_stop		= bond_close,
 	.ndo_start_xmit		= bond_start_xmit,
@@ -4565,48 +4535,34 @@ static const struct net_device_ops bond_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= bond_vlan_rx_kill_vid,
 };
 
-/*
- * Does not allocate but creates a /proc entry.
- * Allowed to fail.
- */
-static int bond_init(struct net_device *bond_dev, struct bond_params *params)
+static void bond_setup(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 
-	pr_debug("Begin bond_init for %s\n", bond_dev->name);
-
 	/* initialize rwlocks */
 	rwlock_init(&bond->lock);
 	rwlock_init(&bond->curr_slave_lock);
 
-	bond->params = *params; /* copy params struct */
-
-	bond->wq = create_singlethread_workqueue(bond_dev->name);
-	if (!bond->wq)
-		return -ENOMEM;
+	bond->params = bonding_defaults;
 
 	/* Initialize pointers */
-	bond->first_slave = NULL;
-	bond->curr_active_slave = NULL;
-	bond->current_arp_slave = NULL;
-	bond->primary_slave = NULL;
 	bond->dev = bond_dev;
-	bond->send_grat_arp = 0;
-	bond->send_unsol_na = 0;
-	bond->setup_by_slave = 0;
 	INIT_LIST_HEAD(&bond->vlan_list);
 
 	/* Initialize the device entry points */
+	ether_setup(bond_dev);
 	bond_dev->netdev_ops = &bond_netdev_ops;
 	bond_dev->ethtool_ops = &bond_ethtool_ops;
 	bond_set_mode_ops(bond, bond->params.mode);
 
-	bond_dev->destructor = bond_destructor;
+	bond_dev->destructor = free_netdev;
 
 	/* Initialize the device options */
 	bond_dev->tx_queue_len = 0;
 	bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
 	bond_dev->priv_flags |= IFF_BONDING;
+	bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
+
 	if (bond->params.arp_interval)
 		bond_dev->priv_flags |= IFF_MASTER_ARPMON;
 
@@ -4631,12 +4587,6 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params)
 			       NETIF_F_HW_VLAN_RX |
 			       NETIF_F_HW_VLAN_FILTER);
 
-#ifdef CONFIG_PROC_FS
-	bond_create_proc_entry(bond);
-#endif
-	list_add_tail(&bond->bond_list, &bond_dev_list);
-
-	return 0;
 }
 
 static void bond_work_cancel_all(struct bonding *bond)
@@ -4671,9 +4621,7 @@ static void bond_deinit(struct net_device *bond_dev)
 
 	bond_work_cancel_all(bond);
 
-#ifdef CONFIG_PROC_FS
 	bond_remove_proc_entry(bond);
-#endif
 }
 
 /* Unregister and free all bond devices.
@@ -4689,12 +4637,10 @@ static void bond_free_all(void)
 		bond_work_cancel_all(bond);
 		/* Release the bonded slaves */
 		bond_release_all(bond_dev);
-		bond_destroy(bond);
+		unregister_netdevice(bond_dev);
 	}
 
-#ifdef CONFIG_PROC_FS
 	bond_destroy_proc_dir();
-#endif
 }
 
 /*------------------------- Module initialization ---------------------------*/
@@ -4742,7 +4688,7 @@ static int bond_check_params(struct bond_params *params)
 	if (mode) {
 		bond_mode = bond_parse_parm(mode, bond_mode_tbl);
 		if (bond_mode == -1) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": Error: Invalid bonding mode \"%s\"\n",
 			       mode == NULL ? "NULL" : mode);
 			return -EINVAL;
@@ -4752,16 +4698,16 @@ static int bond_check_params(struct bond_params *params)
 	if (xmit_hash_policy) {
 		if ((bond_mode != BOND_MODE_XOR) &&
 		    (bond_mode != BOND_MODE_8023AD)) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": xor_mode param is irrelevant in mode %s\n",
 			       bond_mode_name(bond_mode));
 		} else {
 			xmit_hashtype = bond_parse_parm(xmit_hash_policy,
 							xmit_hashtype_tbl);
 			if (xmit_hashtype == -1) {
-				printk(KERN_ERR DRV_NAME
-			       	": Error: Invalid xmit_hash_policy \"%s\"\n",
-			       	xmit_hash_policy == NULL ? "NULL" :
+				pr_err(DRV_NAME
+				       ": Error: Invalid xmit_hash_policy \"%s\"\n",
+				       xmit_hash_policy == NULL ? "NULL" :
 				       xmit_hash_policy);
 				return -EINVAL;
 			}
@@ -4770,13 +4716,13 @@ static int bond_check_params(struct bond_params *params)
 
 	if (lacp_rate) {
 		if (bond_mode != BOND_MODE_8023AD) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": lacp_rate param is irrelevant in mode %s\n",
 			       bond_mode_name(bond_mode));
 		} else {
 			lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
 			if (lacp_fast == -1) {
-				printk(KERN_ERR DRV_NAME
+				pr_err(DRV_NAME
 				       ": Error: Invalid lacp rate \"%s\"\n",
 				       lacp_rate == NULL ? "NULL" : lacp_rate);
 				return -EINVAL;
@@ -4787,14 +4733,14 @@ static int bond_check_params(struct bond_params *params)
 	if (ad_select) {
 		params->ad_select = bond_parse_parm(ad_select, ad_select_tbl);
 		if (params->ad_select == -1) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": Error: Invalid ad_select \"%s\"\n",
 			       ad_select == NULL ? "NULL" : ad_select);
 			return -EINVAL;
 		}
 
 		if (bond_mode != BOND_MODE_8023AD) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": ad_select param only affects 802.3ad mode\n");
 		}
 	} else {
@@ -4802,7 +4748,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (max_bonds < 0 || max_bonds > INT_MAX) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: max_bonds (%d) not in range %d-%d, so it "
 		       "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
 		       max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
@@ -4810,7 +4756,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (miimon < 0) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: miimon module parameter (%d), "
 		       "not in range 0-%d, so it was reset to %d\n",
 		       miimon, INT_MAX, BOND_LINK_MON_INTERV);
@@ -4818,7 +4764,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (updelay < 0) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: updelay module parameter (%d), "
 		       "not in range 0-%d, so it was reset to 0\n",
 		       updelay, INT_MAX);
@@ -4826,7 +4772,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (downdelay < 0) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: downdelay module parameter (%d), "
 		       "not in range 0-%d, so it was reset to 0\n",
 		       downdelay, INT_MAX);
@@ -4834,7 +4780,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if ((use_carrier != 0) && (use_carrier != 1)) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: use_carrier module parameter (%d), "
 		       "not of valid value (0/1), so it was set to 1\n",
 		       use_carrier);
@@ -4842,14 +4788,14 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (num_grat_arp < 0 || num_grat_arp > 255) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: num_grat_arp (%d) not in range 0-255 so it "
 		       "was reset to 1 \n", num_grat_arp);
 		num_grat_arp = 1;
 	}
 
 	if (num_unsol_na < 0 || num_unsol_na > 255) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: num_unsol_na (%d) not in range 0-255 so it "
 		       "was reset to 1 \n", num_unsol_na);
 		num_unsol_na = 1;
@@ -4858,12 +4804,12 @@ static int bond_check_params(struct bond_params *params)
 	/* reset values for 802.3ad */
 	if (bond_mode == BOND_MODE_8023AD) {
 		if (!miimon) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: miimon must be specified, "
 			       "otherwise bonding will not detect link "
 			       "failure, speed and duplex which are "
 			       "essential for 802.3ad operation\n");
-			printk(KERN_WARNING "Forcing miimon to 100msec\n");
+			pr_warning("Forcing miimon to 100msec\n");
 			miimon = 100;
 		}
 	}
@@ -4872,12 +4818,12 @@ static int bond_check_params(struct bond_params *params)
 	if ((bond_mode == BOND_MODE_TLB) ||
 	    (bond_mode == BOND_MODE_ALB)) {
 		if (!miimon) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: miimon must be specified, "
 			       "otherwise bonding will not detect link "
 			       "failure and link speed which are essential "
 			       "for TLB/ALB load balancing\n");
-			printk(KERN_WARNING "Forcing miimon to 100msec\n");
+			pr_warning("Forcing miimon to 100msec\n");
 			miimon = 100;
 		}
 	}
@@ -4897,7 +4843,7 @@ static int bond_check_params(struct bond_params *params)
 			/* just warn the user the up/down delay will have
 			 * no effect since miimon is zero...
 			 */
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: miimon module parameter not set "
 			       "and updelay (%d) or downdelay (%d) module "
 			       "parameter is set; updelay and downdelay have "
@@ -4907,7 +4853,7 @@ static int bond_check_params(struct bond_params *params)
 	} else {
 		/* don't allow arp monitoring */
 		if (arp_interval) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: miimon (%d) and arp_interval (%d) "
 			       "can't be used simultaneously, disabling ARP "
 			       "monitoring\n",
@@ -4916,7 +4862,7 @@ static int bond_check_params(struct bond_params *params)
 		}
 
 		if ((updelay % miimon) != 0) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: updelay (%d) is not a multiple "
 			       "of miimon (%d), updelay rounded to %d ms\n",
 			       updelay, miimon, (updelay / miimon) * miimon);
@@ -4925,7 +4871,7 @@ static int bond_check_params(struct bond_params *params)
 		updelay /= miimon;
 
 		if ((downdelay % miimon) != 0) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: downdelay (%d) is not a multiple "
 			       "of miimon (%d), downdelay rounded to %d ms\n",
 			       downdelay, miimon,
@@ -4936,7 +4882,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 
 	if (arp_interval < 0) {
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: arp_interval module parameter (%d) "
 		       ", not in range 0-%d, so it was reset to %d\n",
 		       arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
@@ -4949,7 +4895,7 @@ static int bond_check_params(struct bond_params *params)
 		/* not complete check, but should be good enough to
 		   catch mistakes */
 		if (!isdigit(arp_ip_target[arp_ip_count][0])) {
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: bad arp_ip_target module parameter "
 			       "(%s), ARP monitoring will not be performed\n",
 			       arp_ip_target[arp_ip_count]);
@@ -4962,7 +4908,7 @@ static int bond_check_params(struct bond_params *params)
 
 	if (arp_interval && !arp_ip_count) {
 		/* don't allow arping if no arp_ip_target given... */
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: arp_interval module parameter (%d) "
 		       "specified without providing an arp_ip_target "
 		       "parameter, arp_interval was reset to 0\n",
@@ -4972,12 +4918,12 @@ static int bond_check_params(struct bond_params *params)
 
 	if (arp_validate) {
 		if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
-			printk(KERN_ERR DRV_NAME
-	       ": arp_validate only supported in active-backup mode\n");
+			pr_err(DRV_NAME
+			       ": arp_validate only supported in active-backup mode\n");
 			return -EINVAL;
 		}
 		if (!arp_interval) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": arp_validate requires arp_interval\n");
 			return -EINVAL;
 		}
@@ -4985,7 +4931,7 @@ static int bond_check_params(struct bond_params *params)
 		arp_validate_value = bond_parse_parm(arp_validate,
 						     arp_validate_tbl);
 		if (arp_validate_value == -1) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": Error: invalid arp_validate \"%s\"\n",
 			       arp_validate == NULL ? "NULL" : arp_validate);
 			return -EINVAL;
@@ -4994,20 +4940,20 @@ static int bond_check_params(struct bond_params *params)
 		arp_validate_value = 0;
 
 	if (miimon) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": MII link monitoring set to %d ms\n",
 		       miimon);
 	} else if (arp_interval) {
 		int i;
 
-		printk(KERN_INFO DRV_NAME
-		       ": ARP monitoring set to %d ms, validate %s, with %d target(s):",
+		pr_info(DRV_NAME ": ARP monitoring set to %d ms,"
+		       " validate %s, with %d target(s):",
 		       arp_interval,
 		       arp_validate_tbl[arp_validate_value].modename,
 		       arp_ip_count);
 
 		for (i = 0; i < arp_ip_count; i++)
-			printk (" %s", arp_ip_target[i]);
+			printk(" %s", arp_ip_target[i]);
 
 		printk("\n");
 
@@ -5015,7 +4961,7 @@ static int bond_check_params(struct bond_params *params)
 		/* miimon and arp_interval not set, we need one so things
 		 * work as expected, see bonding.txt for details
 		 */
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: either miimon or arp_interval and "
 		       "arp_ip_target module parameters must be specified, "
 		       "otherwise bonding will not detect link failures! see "
@@ -5026,7 +4972,7 @@ static int bond_check_params(struct bond_params *params)
 		/* currently, using a primary only makes sense
 		 * in active backup, TLB or ALB modes
 		 */
-		printk(KERN_WARNING DRV_NAME
+		pr_warning(DRV_NAME
 		       ": Warning: %s primary device specified but has no "
 		       "effect in %s mode\n",
 		       primary, bond_mode_name(bond_mode));
@@ -5037,14 +4983,14 @@ static int bond_check_params(struct bond_params *params)
 		fail_over_mac_value = bond_parse_parm(fail_over_mac,
 						      fail_over_mac_tbl);
 		if (fail_over_mac_value == -1) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": Error: invalid fail_over_mac \"%s\"\n",
 			       arp_validate == NULL ? "NULL" : arp_validate);
 			return -EINVAL;
 		}
 
 		if (bond_mode != BOND_MODE_ACTIVEBACKUP)
-			printk(KERN_WARNING DRV_NAME
+			pr_warning(DRV_NAME
 			       ": Warning: fail_over_mac only affects "
 			       "active-backup mode.\n");
 	} else {
@@ -5094,37 +5040,53 @@ static void bond_set_lockdep_class(struct net_device *dev)
 	netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
 }
 
+/*
+ * Called from registration process
+ */
+static int bond_init(struct net_device *bond_dev)
+{
+	struct bonding *bond = netdev_priv(bond_dev);
+
+	pr_debug("Begin bond_init for %s\n", bond_dev->name);
+
+	bond->wq = create_singlethread_workqueue(bond_dev->name);
+	if (!bond->wq)
+		return -ENOMEM;
+
+	bond_set_lockdep_class(bond_dev);
+
+	netif_carrier_off(bond_dev);
+
+	bond_create_proc_entry(bond);
+	list_add_tail(&bond->bond_list, &bond_dev_list);
+
+	return 0;
+}
+
 /* Create a new bond based on the specified name and bonding parameters.
  * If name is NULL, obtain a suitable "bond%d" name for us.
  * Caller must NOT hold rtnl_lock; we need to release it here before we
  * set up our sysfs entries.
  */
-int bond_create(char *name, struct bond_params *params)
+int bond_create(const char *name)
 {
 	struct net_device *bond_dev;
-	struct bonding *bond;
 	int res;
 
 	rtnl_lock();
-	down_write(&bonding_rwsem);
-
 	/* Check to see if the bond already exists. */
-	if (name) {
-		list_for_each_entry(bond, &bond_dev_list, bond_list)
-			if (strnicmp(bond->dev->name, name, IFNAMSIZ) == 0) {
-				printk(KERN_ERR DRV_NAME
-			       ": cannot add bond %s; it already exists\n",
-				       name);
-				res = -EPERM;
-				goto out_rtnl;
-			}
+	/* FIXME: pass netns from caller */
+	if (name && __dev_get_by_name(&init_net, name)) {
+		pr_err(DRV_NAME ": cannot add bond %s; already exists\n",
+		       name);
+		res = -EEXIST;
+		goto out_rtnl;
 	}
 
 	bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
-				ether_setup);
+				bond_setup);
 	if (!bond_dev) {
-		printk(KERN_ERR DRV_NAME
-		       ": %s: eek! can't alloc netdev!\n",
+		pr_err(DRV_NAME ": %s: eek! can't alloc netdev!\n",
 		       name);
 		res = -ENOMEM;
 		goto out_rtnl;
@@ -5136,43 +5098,24 @@ int bond_create(char *name, struct bond_params *params)
 			goto out_netdev;
 	}
 
-	/* bond_init() must be called after dev_alloc_name() (for the
-	 * /proc files), but before register_netdevice(), because we
-	 * need to set function pointers.
-	 */
-
-	res = bond_init(bond_dev, params);
-	if (res < 0) {
-		goto out_netdev;
-	}
-
 	res = register_netdevice(bond_dev);
-	if (res < 0) {
+	if (res < 0)
 		goto out_bond;
-	}
-
-	bond_set_lockdep_class(bond_dev);
-
-	netif_carrier_off(bond_dev);
 
-	up_write(&bonding_rwsem);
-	rtnl_unlock(); /* allows sysfs registration of net device */
 	res = bond_create_sysfs_entry(netdev_priv(bond_dev));
 	if (res < 0)
 		goto out_unreg;
 
+	rtnl_unlock();
 	return 0;
 
 out_unreg:
-	rtnl_lock();
-	down_write(&bonding_rwsem);
 	unregister_netdevice(bond_dev);
 out_bond:
 	bond_deinit(bond_dev);
 out_netdev:
 	free_netdev(bond_dev);
 out_rtnl:
-	up_write(&bonding_rwsem);
 	rtnl_unlock();
 	return res;
 }
@@ -5182,21 +5125,16 @@ static int __init bonding_init(void)
 	int i;
 	int res;
 
-	printk(KERN_INFO "%s", version);
+	pr_info("%s", version);
 
 	res = bond_check_params(&bonding_defaults);
-	if (res) {
+	if (res)
 		goto out;
-	}
 
-#ifdef CONFIG_PROC_FS
 	bond_create_proc_dir();
-#endif
-
-	init_rwsem(&bonding_rwsem);
 
 	for (i = 0; i < max_bonds; i++) {
-		res = bond_create(NULL, &bonding_defaults);
+		res = bond_create(NULL);
 		if (res)
 			goto err;
 	}
@@ -5238,13 +5176,3 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
-MODULE_SUPPORTED_DEVICE("most ethernet devices");
-
-/*
- * Local variables:
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */
-
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index d2873153522..55bf34f59bb 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1,4 +1,3 @@
-
 /*
  * Copyright(c) 2004-2005 Intel Corporation. All rights reserved.
  *
@@ -34,33 +33,14 @@
 #include <linux/ctype.h>
 #include <linux/inet.h>
 #include <linux/rtnetlink.h>
+#include <linux/etherdevice.h>
 #include <net/net_namespace.h>
 
 #include "bonding.h"
 
-#define to_dev(obj)	container_of(obj,struct device,kobj)
+#define to_dev(obj)	container_of(obj, struct device, kobj)
 #define to_bond(cd)	((struct bonding *)(netdev_priv(to_net_dev(cd))))
 
-/*---------------------------- Declarations -------------------------------*/
-
-static int expected_refcount = -1;
-/*--------------------------- Data Structures -----------------------------*/
-
-/* Bonding sysfs lock.  Why can't we just use the subsystem lock?
- * Because kobject_register tries to acquire the subsystem lock.  If
- * we already hold the lock (which we would if the user was creating
- * a new bond through the sysfs interface), we deadlock.
- * This lock is only needed when deleting a bond - we need to make sure
- * that we don't collide with an ongoing ioctl.
- */
-
-struct rw_semaphore bonding_rwsem;
-
-
-
-
-/*------------------------------ Functions --------------------------------*/
-
 /*
  * "show" function for the bond_masters attribute.
  * The class parameter is ignored.
@@ -70,7 +50,7 @@ static ssize_t bonding_show_bonds(struct class *cls, char *buf)
 	int res = 0;
 	struct bonding *bond;
 
-	down_read(&(bonding_rwsem));
+	rtnl_lock();
 
 	list_for_each_entry(bond, &bond_dev_list, bond_list) {
 		if (res > (PAGE_SIZE - IFNAMSIZ)) {
@@ -84,10 +64,22 @@ static ssize_t bonding_show_bonds(struct class *cls, char *buf)
 	}
 	if (res)
 		buf[res-1] = '\n'; /* eat the leftover space */
-	up_read(&(bonding_rwsem));
+
+	rtnl_unlock();
 	return res;
 }
 
+static struct net_device *bond_get_by_name(const char *ifname)
+{
+	struct bonding *bond;
+
+	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+		if (strncmp(bond->dev->name, ifname, IFNAMSIZ) == 0)
+			return bond->dev;
+	}
+	return NULL;
+}
+
 /*
  * "store" function for the bond_masters attribute.  This is what
  * creates and deletes entire bonds.
@@ -96,12 +88,12 @@ static ssize_t bonding_show_bonds(struct class *cls, char *buf)
  *
  */
 
-static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t count)
+static ssize_t bonding_store_bonds(struct class *cls,
+				   const char *buffer, size_t count)
 {
 	char command[IFNAMSIZ + 1] = {0, };
 	char *ifname;
 	int rv, res = count;
-	struct bonding *bond;
 
 	sscanf(buffer, "%16s", command); /* IFNAMSIZ*/
 	ifname = command + 1;
@@ -110,67 +102,48 @@ static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t
 		goto err_no_cmd;
 
 	if (command[0] == '+') {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 			": %s is being created...\n", ifname);
-		rv = bond_create(ifname, &bonding_defaults);
+		rv = bond_create(ifname);
 		if (rv) {
-			printk(KERN_INFO DRV_NAME ": Bond creation failed.\n");
+			pr_info(DRV_NAME ": Bond creation failed.\n");
 			res = rv;
 		}
-		goto out;
-	}
+	} else if (command[0] == '-') {
+		struct net_device *bond_dev;
 
-	if (command[0] == '-') {
 		rtnl_lock();
-		down_write(&bonding_rwsem);
-
-		list_for_each_entry(bond, &bond_dev_list, bond_list)
-			if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) {
-				/* check the ref count on the bond's kobject.
-				 * If it's > expected, then there's a file open,
-				 * and we have to fail.
-				 */
-				if (atomic_read(&bond->dev->dev.kobj.kref.refcount)
-							> expected_refcount){
-					printk(KERN_INFO DRV_NAME
-						": Unable remove bond %s due to open references.\n",
-						ifname);
-					res = -EPERM;
-					goto out_unlock;
-				}
-				printk(KERN_INFO DRV_NAME
-					": %s is being deleted...\n",
-					bond->dev->name);
-				bond_destroy(bond);
-				goto out_unlock;
-			}
-
-		printk(KERN_ERR DRV_NAME
-			": unable to delete non-existent bond %s\n", ifname);
-		res = -ENODEV;
-		goto out_unlock;
-	}
-
-err_no_cmd:
-	printk(KERN_ERR DRV_NAME
-		": no command found in bonding_masters. Use +ifname or -ifname.\n");
-	return -EPERM;
-
-out_unlock:
-	up_write(&bonding_rwsem);
-	rtnl_unlock();
+		bond_dev = bond_get_by_name(ifname);
+		if (bond_dev) {
+			pr_info(DRV_NAME ": %s is being deleted...\n",
+				ifname);
+			unregister_netdevice(bond_dev);
+		} else {
+			pr_err(DRV_NAME ": unable to delete non-existent %s\n",
+			       ifname);
+			res = -ENODEV;
+		}
+		rtnl_unlock();
+	} else
+		goto err_no_cmd;
 
 	/* Always return either count or an error.  If you return 0, you'll
 	 * get called forever, which is bad.
 	 */
-out:
 	return res;
+
+err_no_cmd:
+	pr_err(DRV_NAME ": no command found in bonding_masters."
+	       " Use +ifname or -ifname.\n");
+	return -EPERM;
 }
+
 /* class attribute for bond_masters file.  This ends up in /sys/class/net */
 static CLASS_ATTR(bonding_masters,  S_IWUSR | S_IRUGO,
 		  bonding_show_bonds, bonding_store_bonds);
 
-int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave)
+int bond_create_slave_symlinks(struct net_device *master,
+			       struct net_device *slave)
 {
 	char linkname[IFNAMSIZ+7];
 	int ret = 0;
@@ -181,19 +154,20 @@ int bond_create_slave_symlinks(struct net_device *master, struct net_device *sla
 	if (ret)
 		return ret;
 	/* next, create a link from the master to the slave */
-	sprintf(linkname,"slave_%s",slave->name);
+	sprintf(linkname, "slave_%s", slave->name);
 	ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj),
 				linkname);
 	return ret;
 
 }
 
-void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave)
+void bond_destroy_slave_symlinks(struct net_device *master,
+				 struct net_device *slave)
 {
 	char linkname[IFNAMSIZ+7];
 
 	sysfs_remove_link(&(slave->dev.kobj), "master");
-	sprintf(linkname,"slave_%s",slave->name);
+	sprintf(linkname, "slave_%s", slave->name);
 	sysfs_remove_link(&(master->dev.kobj), linkname);
 }
 
@@ -251,8 +225,8 @@ static ssize_t bonding_store_slaves(struct device *d,
 
 	/* Note:  We can't hold bond->lock here, as bond_create grabs it. */
 
-	rtnl_lock();
-	down_write(&(bonding_rwsem));
+	if (!rtnl_trylock())
+		return restart_syscall();
 
 	sscanf(buffer, "%16s", command); /* IFNAMSIZ*/
 	ifname = command + 1;
@@ -264,46 +238,47 @@ static ssize_t bonding_store_slaves(struct device *d,
 
 		/* Got a slave name in ifname.  Is it already in the list? */
 		found = 0;
-		read_lock(&bond->lock);
-		bond_for_each_slave(bond, slave, i)
-			if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
-				printk(KERN_ERR DRV_NAME
-				       ": %s: Interface %s is already enslaved!\n",
-				       bond->dev->name, ifname);
-				ret = -EPERM;
-				read_unlock(&bond->lock);
-				goto out;
-			}
 
-		read_unlock(&bond->lock);
-		printk(KERN_INFO DRV_NAME ": %s: Adding slave %s.\n",
-		       bond->dev->name, ifname);
-		dev = dev_get_by_name(&init_net, ifname);
+		/* FIXME: get netns from sysfs object */
+		dev = __dev_get_by_name(&init_net, ifname);
 		if (!dev) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: Interface %s does not exist!\n",
 			       bond->dev->name, ifname);
-			ret = -EPERM;
+			ret = -ENODEV;
 			goto out;
 		}
-		else
-			dev_put(dev);
 
 		if (dev->flags & IFF_UP) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: Error: Unable to enslave %s "
 			       "because it is already up.\n",
 			       bond->dev->name, dev->name);
 			ret = -EPERM;
 			goto out;
 		}
+
+		read_lock(&bond->lock);
+		bond_for_each_slave(bond, slave, i)
+			if (slave->dev == dev) {
+				pr_err(DRV_NAME
+				       ": %s: Interface %s is already enslaved!\n",
+				       bond->dev->name, ifname);
+				ret = -EPERM;
+				read_unlock(&bond->lock);
+				goto out;
+			}
+		read_unlock(&bond->lock);
+
+		pr_info(DRV_NAME ": %s: Adding slave %s.\n",
+			bond->dev->name, ifname);
+
 		/* If this is the first slave, then we need to set
 		   the master's hardware address to be the same as the
 		   slave's. */
-		if (!(*((u32 *) & (bond->dev->dev_addr[0])))) {
+		if (is_zero_ether_addr(bond->dev->dev_addr))
 			memcpy(bond->dev->dev_addr, dev->dev_addr,
 			       dev->addr_len);
-		}
 
 		/* Set the slave's MTU to match the bond */
 		original_mtu = dev->mtu;
@@ -317,9 +292,9 @@ static ssize_t bonding_store_slaves(struct device *d,
 		bond_for_each_slave(bond, slave, i)
 			if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0)
 				slave->original_mtu = original_mtu;
-		if (res) {
+		if (res)
 			ret = res;
-		}
+
 		goto out;
 	}
 
@@ -333,7 +308,7 @@ static ssize_t bonding_store_slaves(struct device *d,
 				break;
 			}
 		if (dev) {
-			printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n",
+			pr_info(DRV_NAME ": %s: Removing slave %s\n",
 				bond->dev->name, dev->name);
 				res = bond_release(bond->dev, dev);
 			if (res) {
@@ -342,9 +317,9 @@ static ssize_t bonding_store_slaves(struct device *d,
 			}
 			/* set the slave MTU to the default */
 			dev_set_mtu(dev, original_mtu);
-		}
-		else {
-			printk(KERN_ERR DRV_NAME ": unable to remove non-existent slave %s for bond %s.\n",
+		} else {
+			pr_err(DRV_NAME ": unable to remove non-existent"
+			       " slave %s for bond %s.\n",
 				ifname, bond->dev->name);
 			ret = -ENODEV;
 		}
@@ -352,16 +327,16 @@ static ssize_t bonding_store_slaves(struct device *d,
 	}
 
 err_no_cmd:
-	printk(KERN_ERR DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name);
+	pr_err(DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name);
 	ret = -EPERM;
 
 out:
-	up_write(&(bonding_rwsem));
 	rtnl_unlock();
 	return ret;
 }
 
-static DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves, bonding_store_slaves);
+static DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves,
+		   bonding_store_slaves);
 
 /*
  * Show and set the bonding mode.  The bond interface must be down to
@@ -385,16 +360,15 @@ static ssize_t bonding_store_mode(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (bond->dev->flags & IFF_UP) {
-		printk(KERN_ERR DRV_NAME
-		       ": unable to update mode of %s because interface is up.\n",
-		       bond->dev->name);
+		pr_err(DRV_NAME ": unable to update mode of %s"
+		       " because interface is up.\n", bond->dev->name);
 		ret = -EPERM;
 		goto out;
 	}
 
 	new_value = bond_parse_parm(buf, bond_mode_tbl);
 	if (new_value < 0)  {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid mode value %.*s.\n",
 		       bond->dev->name,
 		       (int)strlen(buf) - 1, buf);
@@ -409,17 +383,19 @@ static ssize_t bonding_store_mode(struct device *d,
 
 		bond->params.mode = new_value;
 		bond_set_mode_ops(bond, bond->params.mode);
-		printk(KERN_INFO DRV_NAME ": %s: setting mode to %s (%d).\n",
-			bond->dev->name, bond_mode_tbl[new_value].modename, new_value);
+		pr_info(DRV_NAME ": %s: setting mode to %s (%d).\n",
+		       bond->dev->name, bond_mode_tbl[new_value].modename,
+		       new_value);
 	}
 out:
 	return ret;
 }
-static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, bonding_show_mode, bonding_store_mode);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+		   bonding_show_mode, bonding_store_mode);
 
 /*
- * Show and set the bonding transmit hash method.  The bond interface must be down to
- * change the xmit hash policy.
+ * Show and set the bonding transmit hash method.
+ * The bond interface must be down to change the xmit hash policy.
  */
 static ssize_t bonding_show_xmit_hash(struct device *d,
 				      struct device_attribute *attr,
@@ -440,7 +416,7 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (bond->dev->flags & IFF_UP) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       "%s: Interface is up. Unable to update xmit policy.\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -449,7 +425,7 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
 
 	new_value = bond_parse_parm(buf, xmit_hashtype_tbl);
 	if (new_value < 0)  {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid xmit hash policy value %.*s.\n",
 		       bond->dev->name,
 		       (int)strlen(buf) - 1, buf);
@@ -458,13 +434,15 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
 	} else {
 		bond->params.xmit_policy = new_value;
 		bond_set_mode_ops(bond, bond->params.mode);
-		printk(KERN_INFO DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n",
-			bond->dev->name, xmit_hashtype_tbl[new_value].modename, new_value);
+		pr_info(DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n",
+			bond->dev->name,
+			xmit_hashtype_tbl[new_value].modename, new_value);
 	}
 out:
 	return ret;
 }
-static DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR, bonding_show_xmit_hash, bonding_store_xmit_hash);
+static DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR,
+		   bonding_show_xmit_hash, bonding_store_xmit_hash);
 
 /*
  * Show and set arp_validate.
@@ -489,39 +467,41 @@ static ssize_t bonding_store_arp_validate(struct device *d,
 
 	new_value = bond_parse_parm(buf, arp_validate_tbl);
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid arp_validate value %s\n",
 		       bond->dev->name, buf);
 		return -EINVAL;
 	}
 	if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: arp_validate only supported in active-backup mode.\n",
 		       bond->dev->name);
 		return -EINVAL;
 	}
-	printk(KERN_INFO DRV_NAME ": %s: setting arp_validate to %s (%d).\n",
+	pr_info(DRV_NAME ": %s: setting arp_validate to %s (%d).\n",
 	       bond->dev->name, arp_validate_tbl[new_value].modename,
 	       new_value);
 
-	if (!bond->params.arp_validate && new_value) {
+	if (!bond->params.arp_validate && new_value)
 		bond_register_arp(bond);
-	} else if (bond->params.arp_validate && !new_value) {
+	else if (bond->params.arp_validate && !new_value)
 		bond_unregister_arp(bond);
-	}
 
 	bond->params.arp_validate = new_value;
 
 	return count;
 }
 
-static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate, bonding_store_arp_validate);
+static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate,
+		   bonding_store_arp_validate);
 
 /*
  * Show and store fail_over_mac.  User only allowed to change the
  * value when there are no slaves.
  */
-static ssize_t bonding_show_fail_over_mac(struct device *d, struct device_attribute *attr, char *buf)
+static ssize_t bonding_show_fail_over_mac(struct device *d,
+					  struct device_attribute *attr,
+					  char *buf)
 {
 	struct bonding *bond = to_bond(d);
 
@@ -530,13 +510,15 @@ static ssize_t bonding_show_fail_over_mac(struct device *d, struct device_attrib
 		       bond->params.fail_over_mac);
 }
 
-static ssize_t bonding_store_fail_over_mac(struct device *d, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t bonding_store_fail_over_mac(struct device *d,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count)
 {
 	int new_value;
 	struct bonding *bond = to_bond(d);
 
 	if (bond->slave_cnt != 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Can't alter fail_over_mac with slaves in bond.\n",
 		       bond->dev->name);
 		return -EPERM;
@@ -544,21 +526,22 @@ static ssize_t bonding_store_fail_over_mac(struct device *d, struct device_attri
 
 	new_value = bond_parse_parm(buf, fail_over_mac_tbl);
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid fail_over_mac value %s.\n",
 		       bond->dev->name, buf);
 		return -EINVAL;
 	}
 
 	bond->params.fail_over_mac = new_value;
-	printk(KERN_INFO DRV_NAME ": %s: Setting fail_over_mac to %s (%d).\n",
+	pr_info(DRV_NAME ": %s: Setting fail_over_mac to %s (%d).\n",
 	       bond->dev->name, fail_over_mac_tbl[new_value].modename,
 	       new_value);
 
 	return count;
 }
 
-static DEVICE_ATTR(fail_over_mac, S_IRUGO | S_IWUSR, bonding_show_fail_over_mac, bonding_store_fail_over_mac);
+static DEVICE_ATTR(fail_over_mac, S_IRUGO | S_IWUSR,
+		   bonding_show_fail_over_mac, bonding_store_fail_over_mac);
 
 /*
  * Show and set the arp timer interval.  There are two tricky bits
@@ -583,28 +566,28 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no arp_interval value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
 		       bond->dev->name, new_value, INT_MAX);
 		ret = -EINVAL;
 		goto out;
 	}
 
-	printk(KERN_INFO DRV_NAME
+	pr_info(DRV_NAME
 	       ": %s: Setting ARP monitoring interval to %d.\n",
 	       bond->dev->name, new_value);
 	bond->params.arp_interval = new_value;
 	if (bond->params.arp_interval)
 		bond->dev->priv_flags |= IFF_MASTER_ARPMON;
 	if (bond->params.miimon) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: ARP monitoring cannot be used with MII monitoring. "
 		       "%s Disabling MII monitoring.\n",
 		       bond->dev->name, bond->dev->name);
@@ -615,7 +598,7 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 		}
 	}
 	if (!bond->params.arp_targets[0]) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: ARP monitoring has been set up, "
 		       "but no ARP targets have been specified.\n",
 		       bond->dev->name);
@@ -641,7 +624,8 @@ static ssize_t bonding_store_arp_interval(struct device *d,
 out:
 	return ret;
 }
-static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR , bonding_show_arp_interval, bonding_store_arp_interval);
+static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR,
+		   bonding_show_arp_interval, bonding_store_arp_interval);
 
 /*
  * Show and set the arp targets.
@@ -677,7 +661,7 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 	/* look for adds */
 	if (buf[0] == '+') {
 		if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: invalid ARP target %pI4 specified for addition\n",
 			       bond->dev->name, &newtarget);
 			ret = -EINVAL;
@@ -686,14 +670,14 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 		/* look for an empty slot to put the target in, and check for dupes */
 		for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
 			if (targets[i] == newtarget) { /* duplicate */
-				printk(KERN_ERR DRV_NAME
+				pr_err(DRV_NAME
 				       ": %s: ARP target %pI4 is already present\n",
 				       bond->dev->name, &newtarget);
 				ret = -EINVAL;
 				goto out;
 			}
 			if (targets[i] == 0) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: adding ARP target %pI4.\n",
 				       bond->dev->name, &newtarget);
 				done = 1;
@@ -701,17 +685,16 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 			}
 		}
 		if (!done) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: ARP target table is full!\n",
 			       bond->dev->name);
 			ret = -EINVAL;
 			goto out;
 		}
 
-	}
-	else if (buf[0] == '-')	{
+	} else if (buf[0] == '-')	{
 		if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
-			printk(KERN_ERR DRV_NAME
+			pr_err(DRV_NAME
 			       ": %s: invalid ARP target %pI4 specified for removal\n",
 			       bond->dev->name, &newtarget);
 			ret = -EINVAL;
@@ -721,7 +704,7 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 		for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
 			if (targets[i] == newtarget) {
 				int j;
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: removing ARP target %pI4.\n",
 				       bond->dev->name, &newtarget);
 				for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
@@ -732,15 +715,15 @@ static ssize_t bonding_store_arp_targets(struct device *d,
 			}
 		}
 		if (!done) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: unable to remove nonexistent ARP target %pI4.\n",
 			       bond->dev->name, &newtarget);
 			ret = -EINVAL;
 			goto out;
 		}
-	}
-	else {
-		printk(KERN_ERR DRV_NAME ": no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
+	} else {
+		pr_err(DRV_NAME ": no command found in arp_ip_targets file"
+		       " for bond %s. Use +<addr> or -<addr>.\n",
 			bond->dev->name);
 		ret = -EPERM;
 		goto out;
@@ -773,7 +756,7 @@ static ssize_t bonding_store_downdelay(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (!(bond->params.miimon)) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to set down delay as MII monitoring is disabled\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -781,14 +764,14 @@ static ssize_t bonding_store_downdelay(struct device *d,
 	}
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no down delay value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
 		       bond->dev->name, new_value, 1, INT_MAX);
 		ret = -EINVAL;
@@ -803,15 +786,17 @@ static ssize_t bonding_store_downdelay(struct device *d,
 			       bond->params.miimon);
 		}
 		bond->params.downdelay = new_value / bond->params.miimon;
-		printk(KERN_INFO DRV_NAME ": %s: Setting down delay to %d.\n",
-		       bond->dev->name, bond->params.downdelay * bond->params.miimon);
+		pr_info(DRV_NAME ": %s: Setting down delay to %d.\n",
+		       bond->dev->name,
+		       bond->params.downdelay * bond->params.miimon);
 
 	}
 
 out:
 	return ret;
 }
-static DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR , bonding_show_downdelay, bonding_store_downdelay);
+static DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR,
+		   bonding_show_downdelay, bonding_store_downdelay);
 
 static ssize_t bonding_show_updelay(struct device *d,
 				    struct device_attribute *attr,
@@ -831,7 +816,7 @@ static ssize_t bonding_store_updelay(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (!(bond->params.miimon)) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to set up delay as MII monitoring is disabled\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -839,14 +824,14 @@ static ssize_t bonding_store_updelay(struct device *d,
 	}
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no up delay value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
 		       bond->dev->name, new_value, 1, INT_MAX);
 		ret = -EINVAL;
@@ -861,7 +846,7 @@ static ssize_t bonding_store_updelay(struct device *d,
 			       bond->params.miimon);
 		}
 		bond->params.updelay = new_value / bond->params.miimon;
-		printk(KERN_INFO DRV_NAME ": %s: Setting up delay to %d.\n",
+		pr_info(DRV_NAME ": %s: Setting up delay to %d.\n",
 		       bond->dev->name, bond->params.updelay * bond->params.miimon);
 
 	}
@@ -869,7 +854,8 @@ static ssize_t bonding_store_updelay(struct device *d,
 out:
 	return ret;
 }
-static DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR , bonding_show_updelay, bonding_store_updelay);
+static DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR,
+		   bonding_show_updelay, bonding_store_updelay);
 
 /*
  * Show and set the LACP interval.  Interface must be down, and the mode
@@ -894,7 +880,7 @@ static ssize_t bonding_store_lacp(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (bond->dev->flags & IFF_UP) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to update LACP rate because interface is up.\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -902,7 +888,7 @@ static ssize_t bonding_store_lacp(struct device *d,
 	}
 
 	if (bond->params.mode != BOND_MODE_8023AD) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to update LACP rate because bond is not in 802.3ad mode.\n",
 		       bond->dev->name);
 		ret = -EPERM;
@@ -913,19 +899,20 @@ static ssize_t bonding_store_lacp(struct device *d,
 
 	if ((new_value == 1) || (new_value == 0)) {
 		bond->params.lacp_fast = new_value;
-		printk(KERN_INFO DRV_NAME
-		       ": %s: Setting LACP rate to %s (%d).\n",
-		       bond->dev->name, bond_lacp_tbl[new_value].modename, new_value);
+		pr_info(DRV_NAME ": %s: Setting LACP rate to %s (%d).\n",
+			bond->dev->name, bond_lacp_tbl[new_value].modename,
+			new_value);
 	} else {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid LACP rate value %.*s.\n",
-		     	bond->dev->name, (int)strlen(buf) - 1, buf);
+		       bond->dev->name, (int)strlen(buf) - 1, buf);
 		ret = -EINVAL;
 	}
 out:
 	return ret;
 }
-static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp);
+static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR,
+		   bonding_show_lacp, bonding_store_lacp);
 
 static ssize_t bonding_show_ad_select(struct device *d,
 				      struct device_attribute *attr,
@@ -947,7 +934,7 @@ static ssize_t bonding_store_ad_select(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (bond->dev->flags & IFF_UP) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Unable to update ad_select because interface "
 		       "is up.\n", bond->dev->name);
 		ret = -EPERM;
@@ -958,12 +945,12 @@ static ssize_t bonding_store_ad_select(struct device *d,
 
 	if (new_value != -1) {
 		bond->params.ad_select = new_value;
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: Setting ad_select to %s (%d).\n",
 		       bond->dev->name, ad_select_tbl[new_value].modename,
 		       new_value);
 	} else {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Ignoring invalid ad_select value %.*s.\n",
 		       bond->dev->name, (int)strlen(buf) - 1, buf);
 		ret = -EINVAL;
@@ -971,8 +958,8 @@ static ssize_t bonding_store_ad_select(struct device *d,
 out:
 	return ret;
 }
-
-static DEVICE_ATTR(ad_select, S_IRUGO | S_IWUSR, bonding_show_ad_select, bonding_store_ad_select);
+static DEVICE_ATTR(ad_select, S_IRUGO | S_IWUSR,
+		   bonding_show_ad_select, bonding_store_ad_select);
 
 /*
  * Show and set the number of grat ARP to send after a failover event.
@@ -994,14 +981,14 @@ static ssize_t bonding_store_n_grat_arp(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no num_grat_arp value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0 || new_value > 255) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
 		       bond->dev->name, new_value);
 		ret = -EINVAL;
@@ -1012,10 +999,11 @@ static ssize_t bonding_store_n_grat_arp(struct device *d,
 out:
 	return ret;
 }
-static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR, bonding_show_n_grat_arp, bonding_store_n_grat_arp);
+static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR,
+		   bonding_show_n_grat_arp, bonding_store_n_grat_arp);
 
 /*
- * Show and set the number of unsolicted NA's to send after a failover event.
+ * Show and set the number of unsolicited NA's to send after a failover event.
  */
 static ssize_t bonding_show_n_unsol_na(struct device *d,
 				       struct device_attribute *attr,
@@ -1034,25 +1022,26 @@ static ssize_t bonding_store_n_unsol_na(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no num_unsol_na value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
+
 	if (new_value < 0 || new_value > 255) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n",
 		       bond->dev->name, new_value);
 		ret = -EINVAL;
 		goto out;
-	} else {
+	} else
 		bond->params.num_unsol_na = new_value;
-	}
 out:
 	return ret;
 }
-static DEVICE_ATTR(num_unsol_na, S_IRUGO | S_IWUSR, bonding_show_n_unsol_na, bonding_store_n_unsol_na);
+static DEVICE_ATTR(num_unsol_na, S_IRUGO | S_IWUSR,
+		   bonding_show_n_unsol_na, bonding_store_n_unsol_na);
 
 /*
  * Show and set the MII monitor interval.  There are two tricky bits
@@ -1077,37 +1066,37 @@ static ssize_t bonding_store_miimon(struct device *d,
 	struct bonding *bond = to_bond(d);
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no miimon value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
 		goto out;
 	}
 	if (new_value < 0) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: Invalid miimon value %d not in range %d-%d; rejected.\n",
 		       bond->dev->name, new_value, 1, INT_MAX);
 		ret = -EINVAL;
 		goto out;
 	} else {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: Setting MII monitoring interval to %d.\n",
 		       bond->dev->name, new_value);
 		bond->params.miimon = new_value;
-		if(bond->params.updelay)
-			printk(KERN_INFO DRV_NAME
+		if (bond->params.updelay)
+			pr_info(DRV_NAME
 			      ": %s: Note: Updating updelay (to %d) "
 			      "since it is a multiple of the miimon value.\n",
 			      bond->dev->name,
 			      bond->params.updelay * bond->params.miimon);
-		if(bond->params.downdelay)
-			printk(KERN_INFO DRV_NAME
+		if (bond->params.downdelay)
+			pr_info(DRV_NAME
 			      ": %s: Note: Updating downdelay (to %d) "
 			      "since it is a multiple of the miimon value.\n",
 			      bond->dev->name,
 			      bond->params.downdelay * bond->params.miimon);
 		if (bond->params.arp_interval) {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: MII monitoring cannot be used with "
 			       "ARP monitoring. Disabling ARP monitoring...\n",
 			       bond->dev->name);
@@ -1141,7 +1130,8 @@ static ssize_t bonding_store_miimon(struct device *d,
 out:
 	return ret;
 }
-static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, bonding_show_miimon, bonding_store_miimon);
+static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR,
+		   bonding_show_miimon, bonding_store_miimon);
 
 /*
  * Show and set the primary slave.  The store function is much
@@ -1171,12 +1161,13 @@ static ssize_t bonding_store_primary(struct device *d,
 	struct slave *slave;
 	struct bonding *bond = to_bond(d);
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	read_lock(&bond->lock);
 	write_lock_bh(&bond->curr_slave_lock);
 
 	if (!USES_PRIMARY(bond->params.mode)) {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: Unable to set primary slave; %s is in mode %d\n",
 		       bond->dev->name, bond->dev->name, bond->params.mode);
 	} else {
@@ -1184,7 +1175,7 @@ static ssize_t bonding_store_primary(struct device *d,
 			if (strnicmp
 			    (slave->dev->name, buf,
 			     strlen(slave->dev->name)) == 0) {
-				printk(KERN_INFO DRV_NAME
+				pr_info(DRV_NAME
 				       ": %s: Setting %s as primary slave.\n",
 				       bond->dev->name, slave->dev->name);
 				bond->primary_slave = slave;
@@ -1196,13 +1187,13 @@ static ssize_t bonding_store_primary(struct device *d,
 		/* if we got here, then we didn't match the name of any slave */
 
 		if (strlen(buf) == 0 || buf[0] == '\n') {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: Setting primary slave to None.\n",
 			       bond->dev->name);
 			bond->primary_slave = NULL;
 				bond_select_active_slave(bond);
 		} else {
-			printk(KERN_INFO DRV_NAME
+			pr_info(DRV_NAME
 			       ": %s: Unable to set %.*s as primary slave as it is not a slave.\n",
 			       bond->dev->name, (int)strlen(buf) - 1, buf);
 		}
@@ -1214,7 +1205,8 @@ out:
 
 	return count;
 }
-static DEVICE_ATTR(primary, S_IRUGO | S_IWUSR, bonding_show_primary, bonding_store_primary);
+static DEVICE_ATTR(primary, S_IRUGO | S_IWUSR,
+		   bonding_show_primary, bonding_store_primary);
 
 /*
  * Show and set the use_carrier flag.
@@ -1237,7 +1229,7 @@ static ssize_t bonding_store_carrier(struct device *d,
 
 
 	if (sscanf(buf, "%d", &new_value) != 1) {
-		printk(KERN_ERR DRV_NAME
+		pr_err(DRV_NAME
 		       ": %s: no use_carrier value specified.\n",
 		       bond->dev->name);
 		ret = -EINVAL;
@@ -1245,17 +1237,18 @@ static ssize_t bonding_store_carrier(struct device *d,
 	}
 	if ((new_value == 0) || (new_value == 1)) {
 		bond->params.use_carrier = new_value;
-		printk(KERN_INFO DRV_NAME ": %s: Setting use_carrier to %d.\n",
+		pr_info(DRV_NAME ": %s: Setting use_carrier to %d.\n",
 		       bond->dev->name, new_value);
 	} else {
-		printk(KERN_INFO DRV_NAME
+		pr_info(DRV_NAME
 		       ": %s: Ignoring invalid use_carrier value %d.\n",
 		       bond->dev->name, new_value);
 	}
 out:
 	return count;
 }
-static DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR, bonding_show_carrier, bonding_store_carrier);
+static DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR,
+		   bonding_show_carrier, bonding_store_carrier);
 
 
 /*
@@ -1284,19 +1277,20 @@ static ssize_t bonding_store_active_slave(struct device *d,
 {
 	int i;
 	struct slave *slave;
-        struct slave *old_active = NULL;
-        struct slave *new_active = NULL;
+	struct slave *old_active = NULL;
+	struct slave *new_active = NULL;
 	struct bonding *bond = to_bond(d);
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	read_lock(&bond->lock);
 	write_lock_bh(&bond->curr_slave_lock);
 
-	if (!USES_PRIMARY(bond->params.mode)) {
-		printk(KERN_INFO DRV_NAME
-		       ": %s: Unable to change active slave; %s is in mode %d\n",
-		       bond->dev->name, bond->dev->name, bond->params.mode);
-	} else {
+	if (!USES_PRIMARY(bond->params.mode))
+		pr_info(DRV_NAME ": %s: Unable to change active slave;"
+			" %s is in mode %d\n",
+			bond->dev->name, bond->dev->name, bond->params.mode);
+	else {
 		bond_for_each_slave(bond, slave, i) {
 			if (strnicmp
 			    (slave->dev->name, buf,
@@ -1335,18 +1329,18 @@ static ssize_t bonding_store_active_slave(struct device *d,
 		/* if we got here, then we didn't match the name of any slave */
 
 		if (strlen(buf) == 0 || buf[0] == '\n') {
-			printk(KERN_INFO DRV_NAME
-			       ": %s: Setting active slave to None.\n",
-			       bond->dev->name);
+			pr_info(DRV_NAME
+				": %s: Setting active slave to None.\n",
+				bond->dev->name);
 			bond->primary_slave = NULL;
-				bond_select_active_slave(bond);
+			bond_select_active_slave(bond);
 		} else {
-			printk(KERN_INFO DRV_NAME
-			       ": %s: Unable to set %.*s as active slave as it is not a slave.\n",
-			       bond->dev->name, (int)strlen(buf) - 1, buf);
+			pr_info(DRV_NAME ": %s: Unable to set %.*s"
+				" as active slave as it is not a slave.\n",
+				bond->dev->name, (int)strlen(buf) - 1, buf);
 		}
 	}
-out:
+ out:
 	write_unlock_bh(&bond->curr_slave_lock);
 	read_unlock(&bond->lock);
 	rtnl_unlock();
@@ -1354,7 +1348,8 @@ out:
 	return count;
 
 }
-static DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR, bonding_show_active_slave, bonding_store_active_slave);
+static DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR,
+		   bonding_show_active_slave, bonding_store_active_slave);
 
 
 /*
@@ -1371,7 +1366,7 @@ static ssize_t bonding_show_mii_status(struct device *d,
 	curr = bond->curr_active_slave;
 	read_unlock(&bond->curr_slave_lock);
 
-	return sprintf(buf, "%s\n", (curr) ? "up" : "down");
+	return sprintf(buf, "%s\n", curr ? "up" : "down");
 }
 static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
 
@@ -1388,7 +1383,9 @@ static ssize_t bonding_show_ad_aggregator(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ?  0 : ad_info.aggregator_id);
+		count = sprintf(buf, "%d\n",
+				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				?  0 : ad_info.aggregator_id);
 	}
 
 	return count;
@@ -1408,7 +1405,9 @@ static ssize_t bonding_show_ad_num_ports(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ?  0: ad_info.ports);
+		count = sprintf(buf, "%d\n",
+				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				?  0 : ad_info.ports);
 	}
 
 	return count;
@@ -1428,7 +1427,9 @@ static ssize_t bonding_show_ad_actor_key(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ?  0 : ad_info.actor_key);
+		count = sprintf(buf, "%d\n",
+				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				?  0 : ad_info.actor_key);
 	}
 
 	return count;
@@ -1448,7 +1449,9 @@ static ssize_t bonding_show_ad_partner_key(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ?  0 : ad_info.partner_key);
+		count = sprintf(buf, "%d\n",
+				(bond_3ad_get_active_agg_info(bond, &ad_info))
+				?  0 : ad_info.partner_key);
 	}
 
 	return count;
@@ -1468,9 +1471,8 @@ static ssize_t bonding_show_ad_partner_mac(struct device *d,
 
 	if (bond->params.mode == BOND_MODE_8023AD) {
 		struct ad_info ad_info;
-		if (!bond_3ad_get_active_agg_info(bond, &ad_info)) {
+		if (!bond_3ad_get_active_agg_info(bond, &ad_info))
 			count = sprintf(buf, "%pM\n", ad_info.partner_system);
-		}
 	}
 
 	return count;
@@ -1538,6 +1540,7 @@ int bond_create_sysfs(void)
 			printk(KERN_ERR
 			       "network device named %s already exists in sysfs",
 			       class_attr_bonding_masters.attr.name);
+		ret = 0;
 	}
 
 	return ret;
@@ -1562,12 +1565,8 @@ int bond_create_sysfs_entry(struct bonding *bond)
 	int err;
 
 	err = sysfs_create_group(&(dev->dev.kobj), &bonding_group);
-	if (err) {
+	if (err)
 		printk(KERN_EMERG "eek! didn't create group!\n");
-	}
-
-	if (expected_refcount < 1)
-		expected_refcount = atomic_read(&bond->dev->dev.kobj.kref.refcount);
 
 	return err;
 }
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index ca849d2adf9..6290a502742 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -286,8 +286,7 @@ static inline unsigned long slave_last_rx(struct bonding *bond,
 static inline void bond_set_slave_inactive_flags(struct slave *slave)
 {
 	struct bonding *bond = netdev_priv(slave->dev->master);
-	if (bond->params.mode != BOND_MODE_TLB &&
-	    bond->params.mode != BOND_MODE_ALB)
+	if (!bond_is_lb(bond))
 		slave->state = BOND_STATE_BACKUP;
 	slave->dev->priv_flags |= IFF_SLAVE_INACTIVE;
 	if (slave_do_arp_validate(bond, slave))
@@ -322,8 +321,7 @@ static inline void bond_unset_master_alb_flags(struct bonding *bond)
 
 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
-int bond_create(char *name, struct bond_params *params);
-void bond_destroy(struct bonding *bond);
+int bond_create(const char *name);
 int  bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev);
 int bond_create_sysfs(void);
 void bond_destroy_sysfs(void);
@@ -350,12 +348,8 @@ extern const struct bond_parm_tbl bond_mode_tbl[];
 extern const struct bond_parm_tbl xmit_hashtype_tbl[];
 extern const struct bond_parm_tbl arp_validate_tbl[];
 extern const struct bond_parm_tbl fail_over_mac_tbl[];
-extern struct bond_params bonding_defaults;
 extern struct bond_parm_tbl ad_select_tbl[];
 
-/* exported from bond_sysfs.c */
-extern struct rw_semaphore bonding_rwsem;
-
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 void bond_send_unsolicited_na(struct bonding *bond);
 void bond_register_ipv6_notifier(void);
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 57def0d5737..d5e18812bf4 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -12,6 +12,68 @@ config CAN_VCAN
 	  This driver can also be built as a module.  If so, the module
 	  will be called vcan.
 
+config CAN_DEV
+	tristate "Platform CAN drivers with Netlink support"
+	depends on CAN
+	default Y
+	---help---
+	  Enables the common framework for platform CAN drivers with Netlink
+	  support. This is the standard library for CAN drivers.
+	  If unsure, say Y.
+
+config CAN_CALC_BITTIMING
+	bool "CAN bit-timing calculation"
+	depends on CAN_DEV
+	default Y
+	---help---
+	  If enabled, CAN bit-timing parameters will be calculated for the
+	  bit-rate specified via Netlink argument "bitrate" when the device
+	  get started. This works fine for the most common CAN controllers
+	  with standard bit-rates but may fail for exotic bit-rates or CAN
+	  source clock frequencies. Disabling saves some space, but then the
+	  bit-timing parameters must be specified directly using the Netlink
+	  arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
+	  If unsure, say Y.
+
+config CAN_SJA1000
+	depends on CAN_DEV
+	tristate "Philips SJA1000"
+	---help---
+	  Driver for the SJA1000 CAN controllers from Philips or NXP
+
+config CAN_SJA1000_PLATFORM
+	depends on CAN_SJA1000
+	tristate "Generic Platform Bus based SJA1000 driver"
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the "platform bus" (Linux abstraction for directly to the
+	  processor attached devices).  Which can be found on various
+	  boards from Phytec (http://www.phytec.de) like the PCM027,
+	  PCM038.
+
+config CAN_SJA1000_OF_PLATFORM
+	depends on CAN_SJA1000 && PPC_OF
+	tristate "Generic OF Platform Bus based SJA1000 driver"
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the OpenFirmware "platform bus" found on embedded systems with
+	  OpenFirmware bindings, e.g. if you have a PowerPC based system
+	  you may want to enable this option.
+
+config CAN_EMS_PCI
+	tristate "EMS CPC-PCI and CPC-PCIe Card"
+	depends on PCI && CAN_SJA1000
+	---help---
+	  This driver is for the one or two channel CPC-PCI and CPC-PCIe
+	  cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+config CAN_KVASER_PCI
+	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+	depends on PCI && CAN_SJA1000
+	---help---
+	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+	  4 channel) from Kvaser (http://www.kvaser.com).
+
 config CAN_DEBUG_DEVICES
 	bool "CAN devices debugging messages"
 	depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index c4bead705cd..523a941b358 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -3,3 +3,10 @@
 #
 
 obj-$(CONFIG_CAN_VCAN)		+= vcan.o
+
+obj-$(CONFIG_CAN_DEV)		+= can-dev.o
+can-dev-y			:= dev.o
+
+obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
new file mode 100644
index 00000000000..574daddc21b
--- /dev/null
+++ b/drivers/net/can/dev.c
@@ -0,0 +1,657 @@
+/*
+ * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
+ * Copyright (C) 2006 Andrey Volkov, Varma Electronics
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/netlink.h>
+#include <net/rtnetlink.h>
+
+#define MOD_DESC "CAN device driver interface"
+
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+
+#ifdef CONFIG_CAN_CALC_BITTIMING
+#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */
+
+/*
+ * Bit-timing calculation derived from:
+ *
+ * Code based on LinCAN sources and H8S2638 project
+ * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz
+ * Copyright 2005      Stanislav Marek
+ * email: pisa@cmp.felk.cvut.cz
+ *
+ * Calculates proper bit-timing parameters for a specified bit-rate
+ * and sample-point, which can then be used to set the bit-timing
+ * registers of the CAN controller. You can find more information
+ * in the header file linux/can/netlink.h.
+ */
+static int can_update_spt(const struct can_bittiming_const *btc,
+			  int sampl_pt, int tseg, int *tseg1, int *tseg2)
+{
+	*tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000;
+	if (*tseg2 < btc->tseg2_min)
+		*tseg2 = btc->tseg2_min;
+	if (*tseg2 > btc->tseg2_max)
+		*tseg2 = btc->tseg2_max;
+	*tseg1 = tseg - *tseg2;
+	if (*tseg1 > btc->tseg1_max) {
+		*tseg1 = btc->tseg1_max;
+		*tseg2 = tseg - *tseg1;
+	}
+	return 1000 * (tseg + 1 - *tseg2) / (tseg + 1);
+}
+
+static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	const struct can_bittiming_const *btc = priv->bittiming_const;
+	long rate, best_rate = 0;
+	long best_error = 1000000000, error = 0;
+	int best_tseg = 0, best_brp = 0, brp = 0;
+	int tsegall, tseg = 0, tseg1 = 0, tseg2 = 0;
+	int spt_error = 1000, spt = 0, sampl_pt;
+	u64 v64;
+
+	if (!priv->bittiming_const)
+		return -ENOTSUPP;
+
+	/* Use CIA recommended sample points */
+	if (bt->sample_point) {
+		sampl_pt = bt->sample_point;
+	} else {
+		if (bt->bitrate > 800000)
+			sampl_pt = 750;
+		else if (bt->bitrate > 500000)
+			sampl_pt = 800;
+		else
+			sampl_pt = 875;
+	}
+
+	/* tseg even = round down, odd = round up */
+	for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1;
+	     tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) {
+		tsegall = 1 + tseg / 2;
+		/* Compute all possible tseg choices (tseg=tseg1+tseg2) */
+		brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2;
+		/* chose brp step which is possible in system */
+		brp = (brp / btc->brp_inc) * btc->brp_inc;
+		if ((brp < btc->brp_min) || (brp > btc->brp_max))
+			continue;
+		rate = priv->clock.freq / (brp * tsegall);
+		error = bt->bitrate - rate;
+		/* tseg brp biterror */
+		if (error < 0)
+			error = -error;
+		if (error > best_error)
+			continue;
+		best_error = error;
+		if (error == 0) {
+			spt = can_update_spt(btc, sampl_pt, tseg / 2,
+					     &tseg1, &tseg2);
+			error = sampl_pt - spt;
+			if (error < 0)
+				error = -error;
+			if (error > spt_error)
+				continue;
+			spt_error = error;
+		}
+		best_tseg = tseg / 2;
+		best_brp = brp;
+		best_rate = rate;
+		if (error == 0)
+			break;
+	}
+
+	if (best_error) {
+		/* Error in one-tenth of a percent */
+		error = (best_error * 1000) / bt->bitrate;
+		if (error > CAN_CALC_MAX_ERROR) {
+			dev_err(dev->dev.parent,
+				"bitrate error %ld.%ld%% too high\n",
+				error / 10, error % 10);
+			return -EDOM;
+		} else {
+			dev_warn(dev->dev.parent, "bitrate error %ld.%ld%%\n",
+				 error / 10, error % 10);
+		}
+	}
+
+	/* real sample point */
+	bt->sample_point = can_update_spt(btc, sampl_pt, best_tseg,
+					  &tseg1, &tseg2);
+
+	v64 = (u64)best_brp * 1000000000UL;
+	do_div(v64, priv->clock.freq);
+	bt->tq = (u32)v64;
+	bt->prop_seg = tseg1 / 2;
+	bt->phase_seg1 = tseg1 - bt->prop_seg;
+	bt->phase_seg2 = tseg2;
+	bt->sjw = 1;
+	bt->brp = best_brp;
+	/* real bit-rate */
+	bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1));
+
+	return 0;
+}
+#else /* !CONFIG_CAN_CALC_BITTIMING */
+static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
+{
+	dev_err(dev->dev.parent, "bit-timing calculation not available\n");
+	return -EINVAL;
+}
+#endif /* CONFIG_CAN_CALC_BITTIMING */
+
+/*
+ * Checks the validity of the specified bit-timing parameters prop_seg,
+ * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate
+ * prescaler value brp. You can find more information in the header
+ * file linux/can/netlink.h.
+ */
+static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	const struct can_bittiming_const *btc = priv->bittiming_const;
+	int tseg1, alltseg;
+	u64 brp64;
+
+	if (!priv->bittiming_const)
+		return -ENOTSUPP;
+
+	tseg1 = bt->prop_seg + bt->phase_seg1;
+	if (!bt->sjw)
+		bt->sjw = 1;
+	if (bt->sjw > btc->sjw_max ||
+	    tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max ||
+	    bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max)
+		return -ERANGE;
+
+	brp64 = (u64)priv->clock.freq * (u64)bt->tq;
+	if (btc->brp_inc > 1)
+		do_div(brp64, btc->brp_inc);
+	brp64 += 500000000UL - 1;
+	do_div(brp64, 1000000000UL); /* the practicable BRP */
+	if (btc->brp_inc > 1)
+		brp64 *= btc->brp_inc;
+	bt->brp = (u32)brp64;
+
+	if (bt->brp < btc->brp_min || bt->brp > btc->brp_max)
+		return -EINVAL;
+
+	alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1;
+	bt->bitrate = priv->clock.freq / (bt->brp * alltseg);
+	bt->sample_point = ((tseg1 + 1) * 1000) / alltseg;
+
+	return 0;
+}
+
+int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	int err;
+
+	/* Check if the CAN device has bit-timing parameters */
+	if (priv->bittiming_const) {
+
+		/* Non-expert mode? Check if the bitrate has been pre-defined */
+		if (!bt->tq)
+			/* Determine bit-timing parameters */
+			err = can_calc_bittiming(dev, bt);
+		else
+			/* Check bit-timing params and calculate proper brp */
+			err = can_fixup_bittiming(dev, bt);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/*
+ * Local echo of CAN messages
+ *
+ * CAN network devices *should* support a local echo functionality
+ * (see Documentation/networking/can.txt). To test the handling of CAN
+ * interfaces that do not support the local echo both driver types are
+ * implemented. In the case that the driver does not support the echo
+ * the IFF_ECHO remains clear in dev->flags. This causes the PF_CAN core
+ * to perform the echo as a fallback solution.
+ */
+static void can_flush_echo_skb(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	int i;
+
+	for (i = 0; i < CAN_ECHO_SKB_MAX; i++) {
+		if (priv->echo_skb[i]) {
+			kfree_skb(priv->echo_skb[i]);
+			priv->echo_skb[i] = NULL;
+			stats->tx_dropped++;
+			stats->tx_aborted_errors++;
+		}
+	}
+}
+
+/*
+ * Put the skb on the stack to be looped backed locally lateron
+ *
+ * The function is typically called in the start_xmit function
+ * of the device driver. The driver must protect access to
+ * priv->echo_skb, if necessary.
+ */
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	/* check flag whether this packet has to be looped back */
+	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) {
+		kfree_skb(skb);
+		return;
+	}
+
+	if (!priv->echo_skb[idx]) {
+		struct sock *srcsk = skb->sk;
+
+		if (atomic_read(&skb->users) != 1) {
+			struct sk_buff *old_skb = skb;
+
+			skb = skb_clone(old_skb, GFP_ATOMIC);
+			kfree_skb(old_skb);
+			if (!skb)
+				return;
+		} else
+			skb_orphan(skb);
+
+		skb->sk = srcsk;
+
+		/* make settings for echo to reduce code in irq context */
+		skb->protocol = htons(ETH_P_CAN);
+		skb->pkt_type = PACKET_BROADCAST;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		skb->dev = dev;
+
+		/* save this skb for tx interrupt echo handling */
+		priv->echo_skb[idx] = skb;
+	} else {
+		/* locking problem with netif_stop_queue() ?? */
+		dev_err(dev->dev.parent, "%s: BUG! echo_skb is occupied!\n",
+			__func__);
+		kfree_skb(skb);
+	}
+}
+EXPORT_SYMBOL_GPL(can_put_echo_skb);
+
+/*
+ * Get the skb from the stack and loop it back locally
+ *
+ * The function is typically called when the TX done interrupt
+ * is handled in the device driver. The driver must protect
+ * access to priv->echo_skb, if necessary.
+ */
+void can_get_echo_skb(struct net_device *dev, int idx)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if ((dev->flags & IFF_ECHO) && priv->echo_skb[idx]) {
+		netif_rx(priv->echo_skb[idx]);
+		priv->echo_skb[idx] = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(can_get_echo_skb);
+
+/*
+ * CAN device restart for bus-off recovery
+ */
+void can_restart(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct can_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct sk_buff *skb;
+	struct can_frame *cf;
+	int err;
+
+	BUG_ON(netif_carrier_ok(dev));
+
+	/*
+	 * No synchronization needed because the device is bus-off and
+	 * no messages can come in or go out.
+	 */
+	can_flush_echo_skb(dev);
+
+	/* send restart message upstream */
+	skb = dev_alloc_skb(sizeof(struct can_frame));
+	if (skb == NULL) {
+		err = -ENOMEM;
+		goto out;
+	}
+	skb->dev = dev;
+	skb->protocol = htons(ETH_P_CAN);
+	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+	memset(cf, 0, sizeof(struct can_frame));
+	cf->can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED;
+	cf->can_dlc = CAN_ERR_DLC;
+
+	netif_rx(skb);
+
+	dev->last_rx = jiffies;
+	stats->rx_packets++;
+	stats->rx_bytes += cf->can_dlc;
+
+	dev_dbg(dev->dev.parent, "restarted\n");
+	priv->can_stats.restarts++;
+
+	/* Now restart the device */
+	err = priv->do_set_mode(dev, CAN_MODE_START);
+
+out:
+	netif_carrier_on(dev);
+	if (err)
+		dev_err(dev->dev.parent, "Error %d during restart", err);
+}
+
+int can_restart_now(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	/*
+	 * A manual restart is only permitted if automatic restart is
+	 * disabled and the device is in the bus-off state
+	 */
+	if (priv->restart_ms)
+		return -EINVAL;
+	if (priv->state != CAN_STATE_BUS_OFF)
+		return -EBUSY;
+
+	/* Runs as soon as possible in the timer context */
+	mod_timer(&priv->restart_timer, jiffies);
+
+	return 0;
+}
+
+/*
+ * CAN bus-off
+ *
+ * This functions should be called when the device goes bus-off to
+ * tell the netif layer that no more packets can be sent or received.
+ * If enabled, a timer is started to trigger bus-off recovery.
+ */
+void can_bus_off(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	dev_dbg(dev->dev.parent, "bus-off\n");
+
+	netif_carrier_off(dev);
+	priv->can_stats.bus_off++;
+
+	if (priv->restart_ms)
+		mod_timer(&priv->restart_timer,
+			  jiffies + (priv->restart_ms * HZ) / 1000);
+}
+EXPORT_SYMBOL_GPL(can_bus_off);
+
+static void can_setup(struct net_device *dev)
+{
+	dev->type = ARPHRD_CAN;
+	dev->mtu = sizeof(struct can_frame);
+	dev->hard_header_len = 0;
+	dev->addr_len = 0;
+	dev->tx_queue_len = 10;
+
+	/* New-style flags. */
+	dev->flags = IFF_NOARP;
+	dev->features = NETIF_F_NO_CSUM;
+}
+
+/*
+ * Allocate and setup space for the CAN network device
+ */
+struct net_device *alloc_candev(int sizeof_priv)
+{
+	struct net_device *dev;
+	struct can_priv *priv;
+
+	dev = alloc_netdev(sizeof_priv, "can%d", can_setup);
+	if (!dev)
+		return NULL;
+
+	priv = netdev_priv(dev);
+
+	priv->state = CAN_STATE_STOPPED;
+
+	init_timer(&priv->restart_timer);
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_candev);
+
+/*
+ * Free space of the CAN network device
+ */
+void free_candev(struct net_device *dev)
+{
+	free_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(free_candev);
+
+/*
+ * Common open function when the device gets opened.
+ *
+ * This function should be called in the open function of the device
+ * driver.
+ */
+int open_candev(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if (!priv->bittiming.tq && !priv->bittiming.bitrate) {
+		dev_err(dev->dev.parent, "bit-timing not yet defined\n");
+		return -EINVAL;
+	}
+
+	setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(open_candev);
+
+/*
+ * Common close function for cleanup before the device gets closed.
+ *
+ * This function should be called in the close function of the device
+ * driver.
+ */
+void close_candev(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if (del_timer_sync(&priv->restart_timer))
+		dev_put(dev);
+	can_flush_echo_skb(dev);
+}
+EXPORT_SYMBOL_GPL(close_candev);
+
+/*
+ * CAN netlink interface
+ */
+static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
+	[IFLA_CAN_STATE]	= { .type = NLA_U32 },
+	[IFLA_CAN_CTRLMODE]	= { .len = sizeof(struct can_ctrlmode) },
+	[IFLA_CAN_RESTART_MS]	= { .type = NLA_U32 },
+	[IFLA_CAN_RESTART]	= { .type = NLA_U32 },
+	[IFLA_CAN_BITTIMING]	= { .len = sizeof(struct can_bittiming) },
+	[IFLA_CAN_BITTIMING_CONST]
+				= { .len = sizeof(struct can_bittiming_const) },
+	[IFLA_CAN_CLOCK]	= { .len = sizeof(struct can_clock) },
+};
+
+static int can_changelink(struct net_device *dev,
+			  struct nlattr *tb[], struct nlattr *data[])
+{
+	struct can_priv *priv = netdev_priv(dev);
+	int err;
+
+	/* We need synchronization with dev->stop() */
+	ASSERT_RTNL();
+
+	if (data[IFLA_CAN_CTRLMODE]) {
+		struct can_ctrlmode *cm;
+
+		/* Do not allow changing controller mode while running */
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+		cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+		priv->ctrlmode &= ~cm->mask;
+		priv->ctrlmode |= cm->flags;
+	}
+
+	if (data[IFLA_CAN_BITTIMING]) {
+		struct can_bittiming bt;
+
+		/* Do not allow changing bittiming while running */
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
+		if ((!bt.bitrate && !bt.tq) || (bt.bitrate && bt.tq))
+			return -EINVAL;
+		err = can_get_bittiming(dev, &bt);
+		if (err)
+			return err;
+		memcpy(&priv->bittiming, &bt, sizeof(bt));
+
+		if (priv->do_set_bittiming) {
+			/* Finally, set the bit-timing registers */
+			err = priv->do_set_bittiming(dev);
+			if (err)
+				return err;
+		}
+	}
+
+	if (data[IFLA_CAN_RESTART_MS]) {
+		/* Do not allow changing restart delay while running */
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+		priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
+	}
+
+	if (data[IFLA_CAN_RESTART]) {
+		/* Do not allow a restart while not running */
+		if (!(dev->flags & IFF_UP))
+			return -EINVAL;
+		err = can_restart_now(dev);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	struct can_ctrlmode cm = {.flags = priv->ctrlmode};
+	enum can_state state = priv->state;
+
+	if (priv->do_get_state)
+		priv->do_get_state(dev, &state);
+	NLA_PUT_U32(skb, IFLA_CAN_STATE, state);
+	NLA_PUT(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm);
+	NLA_PUT_U32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms);
+	NLA_PUT(skb, IFLA_CAN_BITTIMING,
+		sizeof(priv->bittiming), &priv->bittiming);
+	NLA_PUT(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock);
+	if (priv->bittiming_const)
+		NLA_PUT(skb, IFLA_CAN_BITTIMING_CONST,
+			sizeof(*priv->bittiming_const), priv->bittiming_const);
+
+	return 0;
+
+nla_put_failure:
+	return -EMSGSIZE;
+}
+
+static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	NLA_PUT(skb, IFLA_INFO_XSTATS,
+		sizeof(priv->can_stats), &priv->can_stats);
+
+	return 0;
+
+nla_put_failure:
+	return -EMSGSIZE;
+}
+
+static struct rtnl_link_ops can_link_ops __read_mostly = {
+	.kind		= "can",
+	.maxtype	= IFLA_CAN_MAX,
+	.policy		= can_policy,
+	.setup		= can_setup,
+	.changelink	= can_changelink,
+	.fill_info	= can_fill_info,
+	.fill_xstats	= can_fill_xstats,
+};
+
+/*
+ * Register the CAN network device
+ */
+int register_candev(struct net_device *dev)
+{
+	dev->rtnl_link_ops = &can_link_ops;
+	return register_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(register_candev);
+
+/*
+ * Unregister the CAN network device
+ */
+void unregister_candev(struct net_device *dev)
+{
+	unregister_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(unregister_candev);
+
+static __init int can_dev_init(void)
+{
+	int err;
+
+	err = rtnl_link_register(&can_link_ops);
+	if (!err)
+		printk(KERN_INFO MOD_DESC "\n");
+
+	return err;
+}
+module_init(can_dev_init);
+
+static __exit void can_dev_exit(void)
+{
+	rtnl_link_unregister(&can_link_ops);
+}
+module_exit(can_dev_exit);
+
+MODULE_ALIAS_RTNL_LINK("can");
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
new file mode 100644
index 00000000000..9d0c08da273
--- /dev/null
+++ b/drivers/net/can/sja1000/Makefile
@@ -0,0 +1,11 @@
+#
+#  Makefile for the SJA1000 CAN controller drivers.
+#
+
+obj-$(CONFIG_CAN_SJA1000) += sja1000.o
+obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
+obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
+obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
+obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
new file mode 100644
index 00000000000..121b64101d7
--- /dev/null
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
+ * Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com>
+ * Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/io.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME  "ems_pci"
+
+MODULE_AUTHOR("Sebastian Haas <haas@ems-wuenche.com>");
+MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe CAN cards");
+MODULE_SUPPORTED_DEVICE("EMS CPC-PCI/PCIe CAN card");
+MODULE_LICENSE("GPL v2");
+
+#define EMS_PCI_MAX_CHAN 2
+
+struct ems_pci_card {
+	int channels;
+
+	struct pci_dev *pci_dev;
+	struct net_device *net_dev[EMS_PCI_MAX_CHAN];
+
+	void __iomem *conf_addr;
+	void __iomem *base_addr;
+};
+
+#define EMS_PCI_CAN_CLOCK (16000000 / 2)
+
+/*
+ * Register definitions and descriptions are from LinCAN 0.3.3.
+ *
+ * PSB4610 PITA-2 bridge control registers
+ */
+#define PITA2_ICR           0x00	/* Interrupt Control Register */
+#define PITA2_ICR_INT0      0x00000002	/* [RC] INT0 Active/Clear */
+#define PITA2_ICR_INT0_EN   0x00020000	/* [RW] Enable INT0 */
+
+#define PITA2_MISC          0x1c	/* Miscellaneous Register */
+#define PITA2_MISC_CONFIG   0x04000000	/* Multiplexed parallel interface */
+
+/*
+ * The board configuration is probably following:
+ * RX1 is connected to ground.
+ * TX1 is not connected.
+ * CLKO is not connected.
+ * Setting the OCR register to 0xDA is a good idea.
+ * This means  normal output mode , push-pull and the correct polarity.
+ */
+#define EMS_PCI_OCR         (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
+
+/*
+ * In the CDR register, you should set CBP to 1.
+ * You will probably also want to set the clock divider value to 7
+ * (meaning direct oscillator output) because the second SJA1000 chip
+ * is driven by the first one CLKOUT output.
+ */
+#define EMS_PCI_CDR             (CDR_CBP | CDR_CLKOUT_MASK)
+#define EMS_PCI_MEM_SIZE        4096  /* Size of the remapped io-memory */
+#define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */
+#define EMS_PCI_CAN_CTRL_SIZE   0x200 /* memory size for each controller */
+
+#define EMS_PCI_PORT_BYTES  0x4     /* Each register occupies 4 bytes */
+
+#define EMS_PCI_VENDOR_ID   0x110a  /* PCI device and vendor ID */
+#define EMS_PCI_DEVICE_ID   0x2104
+
+static struct pci_device_id ems_pci_tbl[] = {
+	{EMS_PCI_VENDOR_ID, EMS_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{0,}
+};
+MODULE_DEVICE_TABLE(pci, ems_pci_tbl);
+
+/*
+ * Helper to read internal registers from card logic (not CAN)
+ */
+static u8 ems_pci_readb(struct ems_pci_card *card, unsigned int port)
+{
+	return readb(card->base_addr + (port * EMS_PCI_PORT_BYTES));
+}
+
+static u8 ems_pci_read_reg(const struct sja1000_priv *priv, int port)
+{
+	return readb(priv->reg_base + (port * EMS_PCI_PORT_BYTES));
+}
+
+static void ems_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val)
+{
+	writeb(val, priv->reg_base + (port * EMS_PCI_PORT_BYTES));
+}
+
+static void ems_pci_post_irq(const struct sja1000_priv *priv)
+{
+	struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
+
+	/* reset int flag of pita */
+	writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0, card->conf_addr
+		+ PITA2_ICR);
+}
+
+/*
+ * Check if a CAN controller is present at the specified location
+ * by trying to set 'em into the PeliCAN mode
+ */
+static inline int ems_pci_check_chan(const struct sja1000_priv *priv)
+{
+	unsigned char res;
+
+	/* Make sure SJA1000 is in reset mode */
+	ems_pci_write_reg(priv, REG_MOD, 1);
+
+	ems_pci_write_reg(priv, REG_CDR, CDR_PELICAN);
+
+	/* read reset-values */
+	res = ems_pci_read_reg(priv, REG_CDR);
+
+	if (res == CDR_PELICAN)
+		return 1;
+
+	return 0;
+}
+
+static void ems_pci_del_card(struct pci_dev *pdev)
+{
+	struct ems_pci_card *card = pci_get_drvdata(pdev);
+	struct net_device *dev;
+	int i = 0;
+
+	for (i = 0; i < card->channels; i++) {
+		dev = card->net_dev[i];
+
+		if (!dev)
+			continue;
+
+		dev_info(&pdev->dev, "Removing %s.\n", dev->name);
+		unregister_sja1000dev(dev);
+		free_sja1000dev(dev);
+	}
+
+	if (card->base_addr != NULL)
+		pci_iounmap(card->pci_dev, card->base_addr);
+
+	if (card->conf_addr != NULL)
+		pci_iounmap(card->pci_dev, card->conf_addr);
+
+	kfree(card);
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static void ems_pci_card_reset(struct ems_pci_card *card)
+{
+	/* Request board reset */
+	writeb(0, card->base_addr);
+}
+
+/*
+ * Probe PCI device for EMS CAN signature and register each available
+ * CAN channel to SJA1000 Socket-CAN subsystem.
+ */
+static int __devinit ems_pci_add_card(struct pci_dev *pdev,
+					const struct pci_device_id *ent)
+{
+	struct sja1000_priv *priv;
+	struct net_device *dev;
+	struct ems_pci_card *card;
+	int err, i;
+
+	/* Enabling PCI device */
+	if (pci_enable_device(pdev) < 0) {
+		dev_err(&pdev->dev, "Enabling PCI device failed\n");
+		return -ENODEV;
+	}
+
+	/* Allocating card structures to hold addresses, ... */
+	card = kzalloc(sizeof(struct ems_pci_card), GFP_KERNEL);
+	if (card == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate memory\n");
+		pci_disable_device(pdev);
+		return -ENOMEM;
+	}
+
+	pci_set_drvdata(pdev, card);
+
+	card->pci_dev = pdev;
+
+	card->channels = 0;
+
+	/* Remap PITA configuration space, and controller memory area */
+	card->conf_addr = pci_iomap(pdev, 0, EMS_PCI_MEM_SIZE);
+	if (card->conf_addr == NULL) {
+		err = -ENOMEM;
+		goto failure_cleanup;
+	}
+
+	card->base_addr = pci_iomap(pdev, 1, EMS_PCI_MEM_SIZE);
+	if (card->base_addr == NULL) {
+		err = -ENOMEM;
+		goto failure_cleanup;
+	}
+
+	/* Configure PITA-2 parallel interface (enable MUX) */
+	writel(PITA2_MISC_CONFIG, card->conf_addr + PITA2_MISC);
+
+	/* Check for unique EMS CAN signature */
+	if (ems_pci_readb(card, 0) != 0x55 ||
+	    ems_pci_readb(card, 1) != 0xAA ||
+	    ems_pci_readb(card, 2) != 0x01 ||
+	    ems_pci_readb(card, 3) != 0xCB ||
+	    ems_pci_readb(card, 4) != 0x11) {
+		dev_err(&pdev->dev, "Not EMS Dr. Thomas Wuensche interface\n");
+		err = -ENODEV;
+		goto failure_cleanup;
+	}
+
+	ems_pci_card_reset(card);
+
+	/* Detect available channels */
+	for (i = 0; i < EMS_PCI_MAX_CHAN; i++) {
+		dev = alloc_sja1000dev(0);
+		if (dev == NULL) {
+			err = -ENOMEM;
+			goto failure_cleanup;
+		}
+
+		card->net_dev[i] = dev;
+		priv = netdev_priv(dev);
+		priv->priv = card;
+		priv->irq_flags = IRQF_SHARED;
+
+		dev->irq = pdev->irq;
+		priv->reg_base = card->base_addr + EMS_PCI_CAN_BASE_OFFSET
+					+ (i * EMS_PCI_CAN_CTRL_SIZE);
+
+		/* Check if channel is present */
+		if (ems_pci_check_chan(priv)) {
+			priv->read_reg  = ems_pci_read_reg;
+			priv->write_reg = ems_pci_write_reg;
+			priv->post_irq  = ems_pci_post_irq;
+			priv->can.clock.freq = EMS_PCI_CAN_CLOCK;
+			priv->ocr = EMS_PCI_OCR;
+			priv->cdr = EMS_PCI_CDR;
+
+			SET_NETDEV_DEV(dev, &pdev->dev);
+
+			/* Enable interrupts from card */
+			writel(PITA2_ICR_INT0_EN, card->conf_addr + PITA2_ICR);
+
+			/* Register SJA1000 device */
+			err = register_sja1000dev(dev);
+			if (err) {
+				dev_err(&pdev->dev, "Registering device failed "
+							"(err=%d)\n", err);
+				free_sja1000dev(dev);
+				goto failure_cleanup;
+			}
+
+			card->channels++;
+
+			dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d\n",
+					i + 1, priv->reg_base, dev->irq);
+		} else {
+			free_sja1000dev(dev);
+		}
+	}
+
+	return 0;
+
+failure_cleanup:
+	dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);
+
+	ems_pci_del_card(pdev);
+
+	return err;
+}
+
+static struct pci_driver ems_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = ems_pci_tbl,
+	.probe = ems_pci_add_card,
+	.remove = ems_pci_del_card,
+};
+
+static int __init ems_pci_init(void)
+{
+	return pci_register_driver(&ems_pci_driver);
+}
+
+static void __exit ems_pci_exit(void)
+{
+	pci_unregister_driver(&ems_pci_driver);
+}
+
+module_init(ems_pci_init);
+module_exit(ems_pci_exit);
+
diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c
new file mode 100644
index 00000000000..7dd7769b971
--- /dev/null
+++ b/drivers/net/can/sja1000/kvaser_pci.c
@@ -0,0 +1,412 @@
+/*
+ * Copyright (C) 2008 Per Dalen <per.dalen@cnw.se>
+ *
+ * Parts of this software are based on (derived) the following:
+ *
+ * - Kvaser linux driver, version 4.72 BETA
+ *   Copyright (C) 2002-2007 KVASER AB
+ *
+ * - Lincan driver, version 0.3.3, OCERA project
+ *   Copyright (C) 2004 Pavel Pisa
+ *   Copyright (C) 2001 Arnaud Westenberg
+ *
+ * - Socketcan SJA1000 drivers
+ *   Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
+ *   Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ *   Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
+ *   38106 Braunschweig, GERMANY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/io.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME  "kvaser_pci"
+
+MODULE_AUTHOR("Per Dalen <per.dalen@cnw.se>");
+MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards");
+MODULE_SUPPORTED_DEVICE("KVASER PCAN PCI CAN card");
+MODULE_LICENSE("GPL v2");
+
+#define MAX_NO_OF_CHANNELS        4 /* max no of channels on a single card */
+
+struct kvaser_pci {
+	int channel;
+	struct pci_dev *pci_dev;
+	struct net_device *slave_dev[MAX_NO_OF_CHANNELS-1];
+	void __iomem *conf_addr;
+	void __iomem *res_addr;
+	int no_channels;
+	u8 xilinx_ver;
+};
+
+#define KVASER_PCI_CAN_CLOCK      (16000000 / 2)
+
+/*
+ * The board configuration is probably following:
+ * RX1 is connected to ground.
+ * TX1 is not connected.
+ * CLKO is not connected.
+ * Setting the OCR register to 0xDA is a good idea.
+ * This means  normal output mode , push-pull and the correct polarity.
+ */
+#define KVASER_PCI_OCR            (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
+
+/*
+ * In the CDR register, you should set CBP to 1.
+ * You will probably also want to set the clock divider value to 0
+ * (meaning divide-by-2), the Pelican bit, and the clock-off bit
+ * (you will have no need for CLKOUT anyway).
+ */
+#define KVASER_PCI_CDR            (CDR_CBP | CDR_CLKOUT_MASK)
+
+/*
+ * These register values are valid for revision 14 of the Xilinx logic.
+ */
+#define XILINX_VERINT             7   /* Lower nibble simulate interrupts,
+					 high nibble version number. */
+
+#define XILINX_PRESUMED_VERSION   14
+
+/*
+ * Important S5920 registers
+ */
+#define S5920_INTCSR              0x38
+#define S5920_PTCR                0x60
+#define INTCSR_ADDON_INTENABLE_M  0x2000
+
+
+#define KVASER_PCI_PORT_BYTES     0x20
+
+#define PCI_CONFIG_PORT_SIZE      0x80      /* size of the config io-memory */
+#define PCI_PORT_SIZE             0x80      /* size of a channel io-memory */
+#define PCI_PORT_XILINX_SIZE      0x08      /* size of a xilinx io-memory */
+
+#define KVASER_PCI_VENDOR_ID1     0x10e8    /* the PCI device and vendor IDs */
+#define KVASER_PCI_DEVICE_ID1     0x8406
+
+#define KVASER_PCI_VENDOR_ID2     0x1a07    /* the PCI device and vendor IDs */
+#define KVASER_PCI_DEVICE_ID2     0x0008
+
+static struct pci_device_id kvaser_pci_tbl[] = {
+	{KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,},
+	{KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,},
+	{ 0,}
+};
+
+MODULE_DEVICE_TABLE(pci, kvaser_pci_tbl);
+
+static u8 kvaser_pci_read_reg(const struct sja1000_priv *priv, int port)
+{
+	return ioread8(priv->reg_base + port);
+}
+
+static void kvaser_pci_write_reg(const struct sja1000_priv *priv,
+				 int port, u8 val)
+{
+	iowrite8(val, priv->reg_base + port);
+}
+
+static void kvaser_pci_disable_irq(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct kvaser_pci *board = priv->priv;
+	u32 intcsr;
+
+	/* Disable interrupts from card */
+	intcsr = ioread32(board->conf_addr + S5920_INTCSR);
+	intcsr &= ~INTCSR_ADDON_INTENABLE_M;
+	iowrite32(intcsr, board->conf_addr + S5920_INTCSR);
+}
+
+static void kvaser_pci_enable_irq(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct kvaser_pci *board = priv->priv;
+	u32 tmp_en_io;
+
+	/* Enable interrupts from card */
+	tmp_en_io = ioread32(board->conf_addr + S5920_INTCSR);
+	tmp_en_io |= INTCSR_ADDON_INTENABLE_M;
+	iowrite32(tmp_en_io, board->conf_addr + S5920_INTCSR);
+}
+
+static int number_of_sja1000_chip(void __iomem *base_addr)
+{
+	u8 status;
+	int i;
+
+	for (i = 0; i < MAX_NO_OF_CHANNELS; i++) {
+		/* reset chip */
+		iowrite8(MOD_RM, base_addr +
+			 (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
+		status = ioread8(base_addr +
+				 (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
+		/* check reset bit */
+		if (!(status & MOD_RM))
+			break;
+	}
+
+	return i;
+}
+
+static void kvaser_pci_del_chan(struct net_device *dev)
+{
+	struct sja1000_priv *priv;
+	struct kvaser_pci *board;
+	int i;
+
+	if (!dev)
+		return;
+	priv = netdev_priv(dev);
+	board = priv->priv;
+	if (!board)
+		return;
+
+	dev_info(&board->pci_dev->dev, "Removing device %s\n",
+		 dev->name);
+
+	/* Disable PCI interrupts */
+	kvaser_pci_disable_irq(dev);
+
+	for (i = 0; i < board->no_channels - 1; i++) {
+		if (board->slave_dev[i]) {
+			dev_info(&board->pci_dev->dev, "Removing device %s\n",
+				 board->slave_dev[i]->name);
+			unregister_sja1000dev(board->slave_dev[i]);
+			free_sja1000dev(board->slave_dev[i]);
+		}
+	}
+	unregister_sja1000dev(dev);
+
+	pci_iounmap(board->pci_dev, priv->reg_base);
+	pci_iounmap(board->pci_dev, board->conf_addr);
+	pci_iounmap(board->pci_dev, board->res_addr);
+
+	free_sja1000dev(dev);
+}
+
+static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
+			       struct net_device **master_dev,
+			       void __iomem *conf_addr,
+			       void __iomem *res_addr,
+			       void __iomem *base_addr)
+{
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+	struct kvaser_pci *board;
+	int err, init_step;
+
+	dev = alloc_sja1000dev(sizeof(struct kvaser_pci));
+	if (dev == NULL)
+		return -ENOMEM;
+
+	priv = netdev_priv(dev);
+	board = priv->priv;
+
+	board->pci_dev = pdev;
+	board->channel = channel;
+
+	/* S5920 */
+	board->conf_addr = conf_addr;
+
+	/* XILINX board wide address */
+	board->res_addr = res_addr;
+
+	if (channel == 0) {
+		board->xilinx_ver =
+			ioread8(board->res_addr + XILINX_VERINT) >> 4;
+		init_step = 2;
+
+		/* Assert PTADR# - we're in passive mode so the other bits are
+		   not important */
+		iowrite32(0x80808080UL, board->conf_addr + S5920_PTCR);
+
+		/* Enable interrupts from card */
+		kvaser_pci_enable_irq(dev);
+	} else {
+		struct sja1000_priv *master_priv = netdev_priv(*master_dev);
+		struct kvaser_pci *master_board = master_priv->priv;
+		master_board->slave_dev[channel - 1] = dev;
+		master_board->no_channels = channel + 1;
+		board->xilinx_ver = master_board->xilinx_ver;
+	}
+
+	priv->reg_base = base_addr + channel * KVASER_PCI_PORT_BYTES;
+
+	priv->read_reg = kvaser_pci_read_reg;
+	priv->write_reg = kvaser_pci_write_reg;
+
+	priv->can.clock.freq = KVASER_PCI_CAN_CLOCK;
+
+	priv->ocr = KVASER_PCI_OCR;
+	priv->cdr = KVASER_PCI_CDR;
+
+	priv->irq_flags = IRQF_SHARED;
+	dev->irq = pdev->irq;
+
+	init_step = 4;
+
+	dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n",
+		 priv->reg_base, board->conf_addr, dev->irq);
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	/* Register SJA1000 device */
+	err = register_sja1000dev(dev);
+	if (err) {
+		dev_err(&pdev->dev, "Registering device failed (err=%d)\n",
+			err);
+		goto failure;
+	}
+
+	if (channel == 0)
+		*master_dev = dev;
+
+	return 0;
+
+failure:
+	kvaser_pci_del_chan(dev);
+	return err;
+}
+
+static int __devinit kvaser_pci_init_one(struct pci_dev *pdev,
+					 const struct pci_device_id *ent)
+{
+	int err;
+	struct net_device *master_dev = NULL;
+	struct sja1000_priv *priv;
+	struct kvaser_pci *board;
+	int no_channels;
+	void __iomem *base_addr = NULL;
+	void __iomem *conf_addr = NULL;
+	void __iomem *res_addr = NULL;
+	int i;
+
+	dev_info(&pdev->dev, "initializing device %04x:%04x\n",
+		 pdev->vendor, pdev->device);
+
+	err = pci_enable_device(pdev);
+	if (err)
+		goto failure;
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err)
+		goto failure_release_pci;
+
+	/* S5920 */
+	conf_addr = pci_iomap(pdev, 0, PCI_CONFIG_PORT_SIZE);
+	if (conf_addr == NULL) {
+		err = -ENODEV;
+		goto failure_release_regions;
+	}
+
+	/* XILINX board wide address */
+	res_addr = pci_iomap(pdev, 2, PCI_PORT_XILINX_SIZE);
+	if (res_addr == NULL) {
+		err = -ENOMEM;
+		goto failure_iounmap;
+	}
+
+	base_addr = pci_iomap(pdev, 1, PCI_PORT_SIZE);
+	if (base_addr == NULL) {
+		err = -ENOMEM;
+		goto failure_iounmap;
+	}
+
+	no_channels = number_of_sja1000_chip(base_addr);
+	if (no_channels == 0) {
+		err = -ENOMEM;
+		goto failure_iounmap;
+	}
+
+	for (i = 0; i < no_channels; i++) {
+		err = kvaser_pci_add_chan(pdev, i, &master_dev,
+					  conf_addr, res_addr,
+					  base_addr);
+		if (err)
+			goto failure_cleanup;
+	}
+
+	priv = netdev_priv(master_dev);
+	board = priv->priv;
+
+	dev_info(&pdev->dev, "xilinx version=%d number of channels=%d\n",
+		 board->xilinx_ver, board->no_channels);
+
+	pci_set_drvdata(pdev, master_dev);
+	return 0;
+
+failure_cleanup:
+	kvaser_pci_del_chan(master_dev);
+
+failure_iounmap:
+	if (conf_addr != NULL)
+		pci_iounmap(pdev, conf_addr);
+	if (res_addr != NULL)
+		pci_iounmap(pdev, res_addr);
+	if (base_addr != NULL)
+		pci_iounmap(pdev, base_addr);
+
+failure_release_regions:
+	pci_release_regions(pdev);
+
+failure_release_pci:
+	pci_disable_device(pdev);
+
+failure:
+	return err;
+
+}
+
+static void __devexit kvaser_pci_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	kvaser_pci_del_chan(dev);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver kvaser_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = kvaser_pci_tbl,
+	.probe = kvaser_pci_init_one,
+	.remove = __devexit_p(kvaser_pci_remove_one),
+};
+
+static int __init kvaser_pci_init(void)
+{
+	return pci_register_driver(&kvaser_pci_driver);
+}
+
+static void __exit kvaser_pci_exit(void)
+{
+	pci_unregister_driver(&kvaser_pci_driver);
+}
+
+module_init(kvaser_pci_init);
+module_exit(kvaser_pci_exit);
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
new file mode 100644
index 00000000000..571f133a8fe
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -0,0 +1,637 @@
+/*
+ * sja1000.c -  Philips SJA1000 network device driver
+ *
+ * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
+ * 38106 Braunschweig, GERMANY
+ *
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/can/dev.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME "sja1000"
+
+MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION(DRV_NAME "CAN netdevice driver");
+
+static struct can_bittiming_const sja1000_bittiming_const = {
+	.name = DRV_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 16,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 64,
+	.brp_inc = 1,
+};
+
+static int sja1000_probe_chip(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
+		printk(KERN_INFO "%s: probing @0x%lX failed\n",
+		       DRV_NAME, dev->base_addr);
+		return 0;
+	}
+	return -1;
+}
+
+static void set_reset_mode(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	unsigned char status = priv->read_reg(priv, REG_MOD);
+	int i;
+
+	/* disable interrupts */
+	priv->write_reg(priv, REG_IER, IRQ_OFF);
+
+	for (i = 0; i < 100; i++) {
+		/* check reset bit */
+		if (status & MOD_RM) {
+			priv->can.state = CAN_STATE_STOPPED;
+			return;
+		}
+
+		priv->write_reg(priv, REG_MOD, MOD_RM);	/* reset chip */
+		udelay(10);
+		status = priv->read_reg(priv, REG_MOD);
+	}
+
+	dev_err(dev->dev.parent, "setting SJA1000 into reset mode failed!\n");
+}
+
+static void set_normal_mode(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	unsigned char status = priv->read_reg(priv, REG_MOD);
+	int i;
+
+	for (i = 0; i < 100; i++) {
+		/* check reset bit */
+		if ((status & MOD_RM) == 0) {
+			priv->can.state = CAN_STATE_ERROR_ACTIVE;
+			/* enable all interrupts */
+			priv->write_reg(priv, REG_IER, IRQ_ALL);
+			return;
+		}
+
+		/* set chip to normal mode */
+		priv->write_reg(priv, REG_MOD, 0x00);
+		udelay(10);
+		status = priv->read_reg(priv, REG_MOD);
+	}
+
+	dev_err(dev->dev.parent, "setting SJA1000 into normal mode failed!\n");
+}
+
+static void sja1000_start(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	/* leave reset mode */
+	if (priv->can.state != CAN_STATE_STOPPED)
+		set_reset_mode(dev);
+
+	/* Clear error counters and error code capture */
+	priv->write_reg(priv, REG_TXERR, 0x0);
+	priv->write_reg(priv, REG_RXERR, 0x0);
+	priv->read_reg(priv, REG_ECC);
+
+	/* leave reset mode */
+	set_normal_mode(dev);
+}
+
+static int sja1000_set_mode(struct net_device *dev, enum can_mode mode)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	if (!priv->open_time)
+		return -EINVAL;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		sja1000_start(dev);
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int sja1000_set_bittiming(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	u8 btr0, btr1;
+
+	btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+	btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+		(((bt->phase_seg2 - 1) & 0x7) << 4);
+	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		btr1 |= 0x80;
+
+	dev_info(dev->dev.parent,
+		 "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1);
+
+	priv->write_reg(priv, REG_BTR0, btr0);
+	priv->write_reg(priv, REG_BTR1, btr1);
+
+	return 0;
+}
+
+/*
+ * initialize SJA1000 chip:
+ *   - reset chip
+ *   - set output mode
+ *   - set baudrate
+ *   - enable interrupts
+ *   - start operating mode
+ */
+static void chipset_init(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	/* set clock divider and output control register */
+	priv->write_reg(priv, REG_CDR, priv->cdr | CDR_PELICAN);
+
+	/* set acceptance filter (accept all) */
+	priv->write_reg(priv, REG_ACCC0, 0x00);
+	priv->write_reg(priv, REG_ACCC1, 0x00);
+	priv->write_reg(priv, REG_ACCC2, 0x00);
+	priv->write_reg(priv, REG_ACCC3, 0x00);
+
+	priv->write_reg(priv, REG_ACCM0, 0xFF);
+	priv->write_reg(priv, REG_ACCM1, 0xFF);
+	priv->write_reg(priv, REG_ACCM2, 0xFF);
+	priv->write_reg(priv, REG_ACCM3, 0xFF);
+
+	priv->write_reg(priv, REG_OCR, priv->ocr | OCR_MODE_NORMAL);
+}
+
+/*
+ * transmit a CAN message
+ * message layout in the sk_buff should be like this:
+ * xx xx xx xx	 ff	 ll   00 11 22 33 44 55 66 77
+ * [  can-id ] [flags] [len] [can data (up to 8 bytes]
+ */
+static int sja1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	uint8_t fi;
+	uint8_t dlc;
+	canid_t id;
+	uint8_t dreg;
+	int i;
+
+	netif_stop_queue(dev);
+
+	fi = dlc = cf->can_dlc;
+	id = cf->can_id;
+
+	if (id & CAN_RTR_FLAG)
+		fi |= FI_RTR;
+
+	if (id & CAN_EFF_FLAG) {
+		fi |= FI_FF;
+		dreg = EFF_BUF;
+		priv->write_reg(priv, REG_FI, fi);
+		priv->write_reg(priv, REG_ID1, (id & 0x1fe00000) >> (5 + 16));
+		priv->write_reg(priv, REG_ID2, (id & 0x001fe000) >> (5 + 8));
+		priv->write_reg(priv, REG_ID3, (id & 0x00001fe0) >> 5);
+		priv->write_reg(priv, REG_ID4, (id & 0x0000001f) << 3);
+	} else {
+		dreg = SFF_BUF;
+		priv->write_reg(priv, REG_FI, fi);
+		priv->write_reg(priv, REG_ID1, (id & 0x000007f8) >> 3);
+		priv->write_reg(priv, REG_ID2, (id & 0x00000007) << 5);
+	}
+
+	for (i = 0; i < dlc; i++)
+		priv->write_reg(priv, dreg++, cf->data[i]);
+
+	stats->tx_bytes += dlc;
+	dev->trans_start = jiffies;
+
+	can_put_echo_skb(skb, dev, 0);
+
+	priv->write_reg(priv, REG_CMR, CMD_TR);
+
+	return 0;
+}
+
+static void sja1000_rx(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	uint8_t fi;
+	uint8_t dreg;
+	canid_t id;
+	uint8_t dlc;
+	int i;
+
+	skb = dev_alloc_skb(sizeof(struct can_frame));
+	if (skb == NULL)
+		return;
+	skb->dev = dev;
+	skb->protocol = htons(ETH_P_CAN);
+
+	fi = priv->read_reg(priv, REG_FI);
+	dlc = fi & 0x0F;
+
+	if (fi & FI_FF) {
+		/* extended frame format (EFF) */
+		dreg = EFF_BUF;
+		id = (priv->read_reg(priv, REG_ID1) << (5 + 16))
+		    | (priv->read_reg(priv, REG_ID2) << (5 + 8))
+		    | (priv->read_reg(priv, REG_ID3) << 5)
+		    | (priv->read_reg(priv, REG_ID4) >> 3);
+		id |= CAN_EFF_FLAG;
+	} else {
+		/* standard frame format (SFF) */
+		dreg = SFF_BUF;
+		id = (priv->read_reg(priv, REG_ID1) << 3)
+		    | (priv->read_reg(priv, REG_ID2) >> 5);
+	}
+
+	if (fi & FI_RTR)
+		id |= CAN_RTR_FLAG;
+
+	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+	memset(cf, 0, sizeof(struct can_frame));
+	cf->can_id = id;
+	cf->can_dlc = dlc;
+	for (i = 0; i < dlc; i++)
+		cf->data[i] = priv->read_reg(priv, dreg++);
+
+	while (i < 8)
+		cf->data[i++] = 0;
+
+	/* release receive buffer */
+	priv->write_reg(priv, REG_CMR, CMD_RRB);
+
+	netif_rx(skb);
+
+	dev->last_rx = jiffies;
+	stats->rx_packets++;
+	stats->rx_bytes += dlc;
+}
+
+static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	enum can_state state = priv->can.state;
+	uint8_t ecc, alc;
+
+	skb = dev_alloc_skb(sizeof(struct can_frame));
+	if (skb == NULL)
+		return -ENOMEM;
+	skb->dev = dev;
+	skb->protocol = htons(ETH_P_CAN);
+	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+	memset(cf, 0, sizeof(struct can_frame));
+	cf->can_id = CAN_ERR_FLAG;
+	cf->can_dlc = CAN_ERR_DLC;
+
+	if (isrc & IRQ_DOI) {
+		/* data overrun interrupt */
+		dev_dbg(dev->dev.parent, "data overrun interrupt\n");
+		cf->can_id |= CAN_ERR_CRTL;
+		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+		priv->write_reg(priv, REG_CMR, CMD_CDO);	/* clear bit */
+	}
+
+	if (isrc & IRQ_EI) {
+		/* error warning interrupt */
+		dev_dbg(dev->dev.parent, "error warning interrupt\n");
+
+		if (status & SR_BS) {
+			state = CAN_STATE_BUS_OFF;
+			cf->can_id |= CAN_ERR_BUSOFF;
+			can_bus_off(dev);
+		} else if (status & SR_ES) {
+			state = CAN_STATE_ERROR_WARNING;
+		} else
+			state = CAN_STATE_ERROR_ACTIVE;
+	}
+	if (isrc & IRQ_BEI) {
+		/* bus error interrupt */
+		priv->can.can_stats.bus_error++;
+		stats->rx_errors++;
+
+		ecc = priv->read_reg(priv, REG_ECC);
+
+		cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+		switch (ecc & ECC_MASK) {
+		case ECC_BIT:
+			cf->data[2] |= CAN_ERR_PROT_BIT;
+			break;
+		case ECC_FORM:
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+			break;
+		case ECC_STUFF:
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+			break;
+		default:
+			cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+			cf->data[3] = ecc & ECC_SEG;
+			break;
+		}
+		/* Error occured during transmission? */
+		if ((ecc & ECC_DIR) == 0)
+			cf->data[2] |= CAN_ERR_PROT_TX;
+	}
+	if (isrc & IRQ_EPI) {
+		/* error passive interrupt */
+		dev_dbg(dev->dev.parent, "error passive interrupt\n");
+		if (status & SR_ES)
+			state = CAN_STATE_ERROR_PASSIVE;
+		else
+			state = CAN_STATE_ERROR_ACTIVE;
+	}
+	if (isrc & IRQ_ALI) {
+		/* arbitration lost interrupt */
+		dev_dbg(dev->dev.parent, "arbitration lost interrupt\n");
+		alc = priv->read_reg(priv, REG_ALC);
+		priv->can.can_stats.arbitration_lost++;
+		stats->rx_errors++;
+		cf->can_id |= CAN_ERR_LOSTARB;
+		cf->data[0] = alc & 0x1f;
+	}
+
+	if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING ||
+					 state == CAN_STATE_ERROR_PASSIVE)) {
+		uint8_t rxerr = priv->read_reg(priv, REG_RXERR);
+		uint8_t txerr = priv->read_reg(priv, REG_TXERR);
+		cf->can_id |= CAN_ERR_CRTL;
+		if (state == CAN_STATE_ERROR_WARNING) {
+			priv->can.can_stats.error_warning++;
+			cf->data[1] = (txerr > rxerr) ?
+				CAN_ERR_CRTL_TX_WARNING :
+				CAN_ERR_CRTL_RX_WARNING;
+		} else {
+			priv->can.can_stats.error_passive++;
+			cf->data[1] = (txerr > rxerr) ?
+				CAN_ERR_CRTL_TX_PASSIVE :
+				CAN_ERR_CRTL_RX_PASSIVE;
+		}
+	}
+
+	priv->can.state = state;
+
+	netif_rx(skb);
+
+	dev->last_rx = jiffies;
+	stats->rx_packets++;
+	stats->rx_bytes += cf->can_dlc;
+
+	return 0;
+}
+
+irqreturn_t sja1000_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct net_device_stats *stats = &dev->stats;
+	uint8_t isrc, status;
+	int n = 0;
+
+	/* Shared interrupts and IRQ off? */
+	if (priv->read_reg(priv, REG_IER) == IRQ_OFF)
+		return IRQ_NONE;
+
+	if (priv->pre_irq)
+		priv->pre_irq(priv);
+
+	while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
+		n++;
+		status = priv->read_reg(priv, REG_SR);
+
+		if (isrc & IRQ_WUI)
+			dev_warn(dev->dev.parent, "wakeup interrupt\n");
+
+		if (isrc & IRQ_TI) {
+			/* transmission complete interrupt */
+			stats->tx_packets++;
+			can_get_echo_skb(dev, 0);
+			netif_wake_queue(dev);
+		}
+		if (isrc & IRQ_RI) {
+			/* receive interrupt */
+			while (status & SR_RBS) {
+				sja1000_rx(dev);
+				status = priv->read_reg(priv, REG_SR);
+			}
+		}
+		if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
+			/* error interrupt */
+			if (sja1000_err(dev, isrc, status))
+				break;
+		}
+	}
+
+	if (priv->post_irq)
+		priv->post_irq(priv);
+
+	if (n >= SJA1000_MAX_IRQ)
+		dev_dbg(dev->dev.parent, "%d messages handled in ISR", n);
+
+	return (n) ? IRQ_HANDLED : IRQ_NONE;
+}
+EXPORT_SYMBOL_GPL(sja1000_interrupt);
+
+static int sja1000_open(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+	int err;
+
+	/* set chip into reset mode */
+	set_reset_mode(dev);
+
+	/* common open */
+	err = open_candev(dev);
+	if (err)
+		return err;
+
+	/* register interrupt handler, if not done by the device driver */
+	if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) {
+		err = request_irq(dev->irq, &sja1000_interrupt, priv->irq_flags,
+				  dev->name, (void *)dev);
+		if (err) {
+			close_candev(dev);
+			return -EAGAIN;
+		}
+	}
+
+	/* init and start chi */
+	sja1000_start(dev);
+	priv->open_time = jiffies;
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static int sja1000_close(struct net_device *dev)
+{
+	struct sja1000_priv *priv = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	set_reset_mode(dev);
+
+	if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER))
+		free_irq(dev->irq, (void *)dev);
+
+	close_candev(dev);
+
+	priv->open_time = 0;
+
+	return 0;
+}
+
+struct net_device *alloc_sja1000dev(int sizeof_priv)
+{
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+
+	dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv);
+	if (!dev)
+		return NULL;
+
+	priv = netdev_priv(dev);
+
+	priv->dev = dev;
+	priv->can.bittiming_const = &sja1000_bittiming_const;
+	priv->can.do_set_bittiming = sja1000_set_bittiming;
+	priv->can.do_set_mode = sja1000_set_mode;
+
+	if (sizeof_priv)
+		priv->priv = (void *)priv + sizeof(struct sja1000_priv);
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_sja1000dev);
+
+void free_sja1000dev(struct net_device *dev)
+{
+	free_candev(dev);
+}
+EXPORT_SYMBOL_GPL(free_sja1000dev);
+
+static const struct net_device_ops sja1000_netdev_ops = {
+       .ndo_open               = sja1000_open,
+       .ndo_stop               = sja1000_close,
+       .ndo_start_xmit         = sja1000_start_xmit,
+};
+
+int register_sja1000dev(struct net_device *dev)
+{
+	if (!sja1000_probe_chip(dev))
+		return -ENODEV;
+
+	dev->flags |= IFF_ECHO;	/* we support local echo */
+	dev->netdev_ops = &sja1000_netdev_ops;
+
+	set_reset_mode(dev);
+	chipset_init(dev);
+
+	return register_candev(dev);
+}
+EXPORT_SYMBOL_GPL(register_sja1000dev);
+
+void unregister_sja1000dev(struct net_device *dev)
+{
+	set_reset_mode(dev);
+	unregister_candev(dev);
+}
+EXPORT_SYMBOL_GPL(unregister_sja1000dev);
+
+static __init int sja1000_init(void)
+{
+	printk(KERN_INFO "%s CAN netdevice driver\n", DRV_NAME);
+
+	return 0;
+}
+
+module_init(sja1000_init);
+
+static __exit void sja1000_exit(void)
+{
+	printk(KERN_INFO "%s: driver removed\n", DRV_NAME);
+}
+
+module_exit(sja1000_exit);
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
new file mode 100644
index 00000000000..302d2c763ad
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -0,0 +1,181 @@
+/*
+ * sja1000.h -  Philips SJA1000 network device driver
+ *
+ * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
+ * 38106 Braunschweig, GERMANY
+ *
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ */
+
+#ifndef SJA1000_DEV_H
+#define SJA1000_DEV_H
+
+#include <linux/can/dev.h>
+#include <linux/can/platform/sja1000.h>
+
+#define SJA1000_MAX_IRQ 20	/* max. number of interrupts handled in ISR */
+
+/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
+#define REG_MOD		0x00
+#define REG_CMR		0x01
+#define REG_SR		0x02
+#define REG_IR		0x03
+#define REG_IER		0x04
+#define REG_ALC		0x0B
+#define REG_ECC		0x0C
+#define REG_EWL		0x0D
+#define REG_RXERR	0x0E
+#define REG_TXERR	0x0F
+#define REG_ACCC0	0x10
+#define REG_ACCC1	0x11
+#define REG_ACCC2	0x12
+#define REG_ACCC3	0x13
+#define REG_ACCM0	0x14
+#define REG_ACCM1	0x15
+#define REG_ACCM2	0x16
+#define REG_ACCM3	0x17
+#define REG_RMC		0x1D
+#define REG_RBSA	0x1E
+
+/* Common registers - manual section 6.5 */
+#define REG_BTR0	0x06
+#define REG_BTR1	0x07
+#define REG_OCR		0x08
+#define REG_CDR		0x1F
+
+#define REG_FI		0x10
+#define SFF_BUF		0x13
+#define EFF_BUF		0x15
+
+#define FI_FF		0x80
+#define FI_RTR		0x40
+
+#define REG_ID1		0x11
+#define REG_ID2		0x12
+#define REG_ID3		0x13
+#define REG_ID4		0x14
+
+#define CAN_RAM		0x20
+
+/* mode register */
+#define MOD_RM		0x01
+#define MOD_LOM		0x02
+#define MOD_STM		0x04
+#define MOD_AFM		0x08
+#define MOD_SM		0x10
+
+/* commands */
+#define CMD_SRR		0x10
+#define CMD_CDO		0x08
+#define CMD_RRB		0x04
+#define CMD_AT		0x02
+#define CMD_TR		0x01
+
+/* interrupt sources */
+#define IRQ_BEI		0x80
+#define IRQ_ALI		0x40
+#define IRQ_EPI		0x20
+#define IRQ_WUI		0x10
+#define IRQ_DOI		0x08
+#define IRQ_EI		0x04
+#define IRQ_TI		0x02
+#define IRQ_RI		0x01
+#define IRQ_ALL		0xFF
+#define IRQ_OFF		0x00
+
+/* status register content */
+#define SR_BS		0x80
+#define SR_ES		0x40
+#define SR_TS		0x20
+#define SR_RS		0x10
+#define SR_TCS		0x08
+#define SR_TBS		0x04
+#define SR_DOS		0x02
+#define SR_RBS		0x01
+
+#define SR_CRIT (SR_BS|SR_ES)
+
+/* ECC register */
+#define ECC_SEG		0x1F
+#define ECC_DIR		0x20
+#define ECC_ERR		6
+#define ECC_BIT		0x00
+#define ECC_FORM	0x40
+#define ECC_STUFF	0x80
+#define ECC_MASK	0xc0
+
+/*
+ * Flags for sja1000priv.flags
+ */
+#define SJA1000_CUSTOM_IRQ_HANDLER 0x1
+
+/*
+ * SJA1000 private data structure
+ */
+struct sja1000_priv {
+	struct can_priv can;	/* must be the first member */
+	int open_time;
+	struct sk_buff *echo_skb;
+
+	/* the lower-layer is responsible for appropriate locking */
+	u8 (*read_reg) (const struct sja1000_priv *priv, int reg);
+	void (*write_reg) (const struct sja1000_priv *priv, int reg, u8 val);
+	void (*pre_irq) (const struct sja1000_priv *priv);
+	void (*post_irq) (const struct sja1000_priv *priv);
+
+	void *priv;		/* for board-specific data */
+	struct net_device *dev;
+
+	void __iomem *reg_base;	 /* ioremap'ed address to registers */
+	unsigned long irq_flags; /* for request_irq() */
+
+	u16 flags;		/* custom mode flags */
+	u8 ocr;			/* output control register */
+	u8 cdr;			/* clock divider register */
+};
+
+struct net_device *alloc_sja1000dev(int sizeof_priv);
+void free_sja1000dev(struct net_device *dev);
+int register_sja1000dev(struct net_device *dev);
+void unregister_sja1000dev(struct net_device *dev);
+
+irqreturn_t sja1000_interrupt(int irq, void *dev_id);
+
+#endif /* SJA1000_DEV_H */
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
new file mode 100644
index 00000000000..3373560405b
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -0,0 +1,235 @@
+/*
+ * Driver for SJA1000 CAN controllers on the OpenFirmware platform bus
+ *
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* This is a generic driver for SJA1000 chips on the OpenFirmware platform
+ * bus found on embedded PowerPC systems. You need a SJA1000 CAN node
+ * definition in your flattened device tree source (DTS) file similar to:
+ *
+ *   can@3,100 {
+ *           compatible = "nxp,sja1000";
+ *           reg = <3 0x100 0x80>;
+ *           interrupts = <2 0>;
+ *           interrupt-parent = <&mpic>;
+ *           nxp,external-clock-frequency = <16000000>;
+ *   };
+ *
+ * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
+ * information.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+
+#include <linux/of_platform.h>
+#include <asm/prom.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME "sja1000_of_platform"
+
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the OF platform bus");
+MODULE_LICENSE("GPL v2");
+
+#define SJA1000_OFP_CAN_CLOCK  (16000000 / 2)
+
+#define SJA1000_OFP_OCR        OCR_TX0_PULLDOWN
+#define SJA1000_OFP_CDR        (CDR_CBP | CDR_CLK_OFF)
+
+static u8 sja1000_ofp_read_reg(const struct sja1000_priv *priv, int reg)
+{
+	return in_8(priv->reg_base + reg);
+}
+
+static void sja1000_ofp_write_reg(const struct sja1000_priv *priv,
+				  int reg, u8 val)
+{
+	out_8(priv->reg_base + reg, val);
+}
+
+static int __devexit sja1000_ofp_remove(struct of_device *ofdev)
+{
+	struct net_device *dev = dev_get_drvdata(&ofdev->dev);
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct device_node *np = ofdev->node;
+	struct resource res;
+
+	dev_set_drvdata(&ofdev->dev, NULL);
+
+	unregister_sja1000dev(dev);
+	free_sja1000dev(dev);
+	iounmap(priv->reg_base);
+	irq_dispose_mapping(dev->irq);
+
+	of_address_to_resource(np, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+
+	return 0;
+}
+
+static int __devinit sja1000_ofp_probe(struct of_device *ofdev,
+				       const struct of_device_id *id)
+{
+	struct device_node *np = ofdev->node;
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+	struct resource res;
+	const u32 *prop;
+	int err, irq, res_size, prop_size;
+	void __iomem *base;
+
+	err = of_address_to_resource(np, 0, &res);
+	if (err) {
+		dev_err(&ofdev->dev, "invalid address\n");
+		return err;
+	}
+
+	res_size = resource_size(&res);
+
+	if (!request_mem_region(res.start, res_size, DRV_NAME)) {
+		dev_err(&ofdev->dev, "couldn't request %#llx..%#llx\n",
+			(unsigned long long)res.start,
+			(unsigned long long)res.end);
+		return -EBUSY;
+	}
+
+	base = ioremap_nocache(res.start, res_size);
+	if (!base) {
+		dev_err(&ofdev->dev, "couldn't ioremap %#llx..%#llx\n",
+			(unsigned long long)res.start,
+			(unsigned long long)res.end);
+		err = -ENOMEM;
+		goto exit_release_mem;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&ofdev->dev, "no irq found\n");
+		err = -ENODEV;
+		goto exit_unmap_mem;
+	}
+
+	dev = alloc_sja1000dev(0);
+	if (!dev) {
+		err = -ENOMEM;
+		goto exit_dispose_irq;
+	}
+
+	priv = netdev_priv(dev);
+
+	priv->read_reg = sja1000_ofp_read_reg;
+	priv->write_reg = sja1000_ofp_write_reg;
+
+	prop = of_get_property(np, "nxp,external-clock-frequency", &prop_size);
+	if (prop && (prop_size ==  sizeof(u32)))
+		priv->can.clock.freq = *prop / 2;
+	else
+		priv->can.clock.freq = SJA1000_OFP_CAN_CLOCK; /* default */
+
+	prop = of_get_property(np, "nxp,tx-output-mode", &prop_size);
+	if (prop && (prop_size == sizeof(u32)))
+		priv->ocr |= *prop & OCR_MODE_MASK;
+	else
+		priv->ocr |= OCR_MODE_NORMAL; /* default */
+
+	prop = of_get_property(np, "nxp,tx-output-config", &prop_size);
+	if (prop && (prop_size == sizeof(u32)))
+		priv->ocr |= (*prop << OCR_TX_SHIFT) & OCR_TX_MASK;
+	else
+		priv->ocr |= OCR_TX0_PULLDOWN; /* default */
+
+	prop = of_get_property(np, "nxp,clock-out-frequency", &prop_size);
+	if (prop && (prop_size == sizeof(u32)) && *prop) {
+		u32 divider = priv->can.clock.freq * 2 / *prop;
+
+		if (divider > 1)
+			priv->cdr |= divider / 2 - 1;
+		else
+			priv->cdr |= CDR_CLKOUT_MASK;
+	} else {
+		priv->cdr |= CDR_CLK_OFF; /* default */
+	}
+
+	prop = of_get_property(np, "nxp,no-comparator-bypass", NULL);
+	if (!prop)
+		priv->cdr |= CDR_CBP; /* default */
+
+	priv->irq_flags = IRQF_SHARED;
+	priv->reg_base = base;
+
+	dev->irq = irq;
+
+	dev_info(&ofdev->dev,
+		 "reg_base=0x%p irq=%d clock=%d ocr=0x%02x cdr=0x%02x\n",
+		 priv->reg_base, dev->irq, priv->can.clock.freq,
+		 priv->ocr, priv->cdr);
+
+	dev_set_drvdata(&ofdev->dev, dev);
+	SET_NETDEV_DEV(dev, &ofdev->dev);
+
+	err = register_sja1000dev(dev);
+	if (err) {
+		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
+			DRV_NAME, err);
+		goto exit_free_sja1000;
+	}
+
+	return 0;
+
+exit_free_sja1000:
+	free_sja1000dev(dev);
+exit_dispose_irq:
+	irq_dispose_mapping(irq);
+exit_unmap_mem:
+	iounmap(base);
+exit_release_mem:
+	release_mem_region(res.start, res_size);
+
+	return err;
+}
+
+static struct of_device_id __devinitdata sja1000_ofp_table[] = {
+	{.compatible = "nxp,sja1000"},
+	{},
+};
+
+static struct of_platform_driver sja1000_ofp_driver = {
+	.owner = THIS_MODULE,
+	.name = DRV_NAME,
+	.probe = sja1000_ofp_probe,
+	.remove = __devexit_p(sja1000_ofp_remove),
+	.match_table = sja1000_ofp_table,
+};
+
+static int __init sja1000_ofp_init(void)
+{
+	return of_register_platform_driver(&sja1000_ofp_driver);
+}
+module_init(sja1000_ofp_init);
+
+static void __exit sja1000_ofp_exit(void)
+{
+	return of_unregister_platform_driver(&sja1000_ofp_driver);
+};
+module_exit(sja1000_ofp_exit);
diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
new file mode 100644
index 00000000000..628374c2a05
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2005 Sascha Hauer, Pengutronix
+ * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/platform/sja1000.h>
+#include <linux/io.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME "sja1000_platform"
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the platform bus");
+MODULE_LICENSE("GPL v2");
+
+static u8 sp_read_reg(const struct sja1000_priv *priv, int reg)
+{
+	return ioread8(priv->reg_base + reg);
+}
+
+static void sp_write_reg(const struct sja1000_priv *priv, int reg, u8 val)
+{
+	iowrite8(val, priv->reg_base + reg);
+}
+
+static int sp_probe(struct platform_device *pdev)
+{
+	int err;
+	void __iomem *addr;
+	struct net_device *dev;
+	struct sja1000_priv *priv;
+	struct resource *res_mem, *res_irq;
+	struct sja1000_platform_data *pdata;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data provided!\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res_mem || !res_irq) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	if (!request_mem_region(res_mem->start, resource_size(res_mem),
+				DRV_NAME)) {
+		err = -EBUSY;
+		goto exit;
+	}
+
+	addr = ioremap_nocache(res_mem->start, resource_size(res_mem));
+	if (!addr) {
+		err = -ENOMEM;
+		goto exit_release;
+	}
+
+	dev = alloc_sja1000dev(0);
+	if (!dev) {
+		err = -ENOMEM;
+		goto exit_iounmap;
+	}
+	priv = netdev_priv(dev);
+
+	dev->irq = res_irq->start;
+	priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
+	priv->reg_base = addr;
+	priv->read_reg = sp_read_reg;
+	priv->write_reg = sp_write_reg;
+	priv->can.clock.freq = pdata->clock;
+	priv->ocr = pdata->ocr;
+	priv->cdr = pdata->cdr;
+
+	dev_set_drvdata(&pdev->dev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	err = register_sja1000dev(dev);
+	if (err) {
+		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+			DRV_NAME, err);
+		goto exit_free;
+	}
+
+	dev_info(&pdev->dev, "%s device registered (reg_base=%p, irq=%d)\n",
+		 DRV_NAME, priv->reg_base, dev->irq);
+	return 0;
+
+ exit_free:
+	free_sja1000dev(dev);
+ exit_iounmap:
+	iounmap(addr);
+ exit_release:
+	release_mem_region(res_mem->start, resource_size(res_mem));
+ exit:
+	return err;
+}
+
+static int sp_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = dev_get_drvdata(&pdev->dev);
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct resource *res;
+
+	unregister_sja1000dev(dev);
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	if (priv->reg_base)
+		iounmap(priv->reg_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	free_sja1000dev(dev);
+
+	return 0;
+}
+
+static struct platform_driver sp_driver = {
+	.probe = sp_probe,
+	.remove = sp_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init sp_init(void)
+{
+	return platform_driver_register(&sp_driver);
+}
+
+static void __exit sp_exit(void)
+{
+	platform_driver_unregister(&sp_driver);
+}
+
+module_init(sp_init);
+module_exit(sp_exit);
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index f5222764061..eb066673c2a 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -2934,7 +2934,7 @@ static int cas_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 *      individual queues.
 	 */
 	if (cas_xmit_tx_ringN(cp, ring++ & N_TX_RINGS_MASK, skb))
-		return 1;
+		return NETDEV_TX_BUSY;
 	dev->trans_start = jiffies;
 	return 0;
 }
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
index 4bd2455b0fe..699d22c5fe0 100644
--- a/drivers/net/chelsio/common.h
+++ b/drivers/net/chelsio/common.h
@@ -46,7 +46,7 @@
 #include <linux/pci.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
 #include <linux/crc32.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h
index 79d855e267e..1f095a9fc73 100644
--- a/drivers/net/chelsio/cphy.h
+++ b/drivers/net/chelsio/cphy.h
@@ -43,10 +43,11 @@
 
 struct mdio_ops {
 	void (*init)(adapter_t *adapter, const struct board_info *bi);
-	int  (*read)(adapter_t *adapter, int phy_addr, int mmd_addr,
-		     int reg_addr, unsigned int *val);
-	int  (*write)(adapter_t *adapter, int phy_addr, int mmd_addr,
-		      int reg_addr, unsigned int val);
+	int  (*read)(struct net_device *dev, int phy_addr, int mmd_addr,
+		     u16 reg_addr);
+	int  (*write)(struct net_device *dev, int phy_addr, int mmd_addr,
+		      u16 reg_addr, u16 val);
+	unsigned mode_support;
 };
 
 /* PHY interrupt types */
@@ -83,11 +84,12 @@ struct cphy_ops {
 	int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex);
 	int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed,
 			       int *duplex, int *fc);
+
+	u32 mmds;
 };
 
 /* A PHY instance */
 struct cphy {
-	int addr;                            /* PHY address */
 	int state;	/* Link status state machine */
 	adapter_t *adapter;                  /* associated adapter */
 
@@ -101,56 +103,61 @@ struct cphy {
 	u32 elmer_gpo;
 
 	const struct cphy_ops *ops;            /* PHY operations */
-	int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr,
-			 int reg_addr, unsigned int *val);
-	int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr,
-			  int reg_addr, unsigned int val);
+	struct mdio_if_info mdio;
 	struct cphy_instance *instance;
 };
 
 /* Convenience MDIO read/write wrappers */
-static inline int mdio_read(struct cphy *cphy, int mmd, int reg,
-			    unsigned int *valp)
+static inline int cphy_mdio_read(struct cphy *cphy, int mmd, int reg,
+				 unsigned int *valp)
 {
-	return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp);
+	int rc = cphy->mdio.mdio_read(cphy->mdio.dev, cphy->mdio.prtad, mmd,
+				      reg);
+	*valp = (rc >= 0) ? rc : -1;
+	return (rc >= 0) ? 0 : rc;
 }
 
-static inline int mdio_write(struct cphy *cphy, int mmd, int reg,
-			     unsigned int val)
+static inline int cphy_mdio_write(struct cphy *cphy, int mmd, int reg,
+				  unsigned int val)
 {
-	return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val);
+	return cphy->mdio.mdio_write(cphy->mdio.dev, cphy->mdio.prtad, mmd,
+				     reg, val);
 }
 
 static inline int simple_mdio_read(struct cphy *cphy, int reg,
 				   unsigned int *valp)
 {
-	return mdio_read(cphy, 0, reg, valp);
+	return cphy_mdio_read(cphy, MDIO_DEVAD_NONE, reg, valp);
 }
 
 static inline int simple_mdio_write(struct cphy *cphy, int reg,
 				    unsigned int val)
 {
-	return mdio_write(cphy, 0, reg, val);
+	return cphy_mdio_write(cphy, MDIO_DEVAD_NONE, reg, val);
 }
 
 /* Convenience initializer */
-static inline void cphy_init(struct cphy *phy, adapter_t *adapter,
+static inline void cphy_init(struct cphy *phy, struct net_device *dev,
 			     int phy_addr, struct cphy_ops *phy_ops,
 			     const struct mdio_ops *mdio_ops)
 {
+	struct adapter *adapter = netdev_priv(dev);
 	phy->adapter = adapter;
-	phy->addr    = phy_addr;
 	phy->ops     = phy_ops;
 	if (mdio_ops) {
-		phy->mdio_read  = mdio_ops->read;
-		phy->mdio_write = mdio_ops->write;
+		phy->mdio.prtad = phy_addr;
+		phy->mdio.mmds = phy_ops->mmds;
+		phy->mdio.mode_support = mdio_ops->mode_support;
+		phy->mdio.mdio_read = mdio_ops->read;
+		phy->mdio.mdio_write = mdio_ops->write;
 	}
+	phy->mdio.dev = dev;
 }
 
 /* Operations of the PHY-instance factory */
 struct gphy {
 	/* Construct a PHY instance with the given PHY address */
-	struct cphy *(*create)(adapter_t *adapter, int phy_addr,
+	struct cphy *(*create)(struct net_device *dev, int phy_addr,
 			       const struct mdio_ops *mdio_ops);
 
 	/*
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index fa06994f973..082cdb28b51 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -589,7 +589,7 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	}
 
 	cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
-	cmd->phy_address = p->phy->addr;
+	cmd->phy_address = p->phy->mdio.prtad;
 	cmd->transceiver = XCVR_EXTERNAL;
 	cmd->autoneg = p->link_config.autoneg;
 	cmd->maxtxpkt = 0;
@@ -849,39 +849,9 @@ static const struct ethtool_ops t1_ethtool_ops = {
 static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 {
 	struct adapter *adapter = dev->ml_priv;
-	struct mii_ioctl_data *data = if_mii(req);
-
-	switch (cmd) {
-	case SIOCGMIIPHY:
-		data->phy_id = adapter->port[dev->if_port].phy->addr;
-		/* FALLTHRU */
-	case SIOCGMIIREG: {
-		struct cphy *phy = adapter->port[dev->if_port].phy;
-		u32 val;
-
-		if (!phy->mdio_read)
-			return -EOPNOTSUPP;
-		phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f,
-			       &val);
-		data->val_out = val;
-		break;
-	}
-	case SIOCSMIIREG: {
-		struct cphy *phy = adapter->port[dev->if_port].phy;
-
-		if (!capable(CAP_NET_ADMIN))
-		    return -EPERM;
-		if (!phy->mdio_write)
-			return -EOPNOTSUPP;
-		phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f,
-			        data->val_in);
-		break;
-	}
+	struct mdio_if_info *mdio = &adapter->port[dev->if_port].phy->mdio;
 
-	default:
-		return -EOPNOTSUPP;
-	}
-	return 0;
+	return mdio_mii_ioctl(mdio, if_mii(req), cmd);
 }
 
 static int t1_change_mtu(struct net_device *dev, int new_mtu)
diff --git a/drivers/net/chelsio/mv88e1xxx.c b/drivers/net/chelsio/mv88e1xxx.c
index 0632be0d649..809047a99e9 100644
--- a/drivers/net/chelsio/mv88e1xxx.c
+++ b/drivers/net/chelsio/mv88e1xxx.c
@@ -353,15 +353,16 @@ static struct cphy_ops mv88e1xxx_ops = {
 	.get_link_status      = mv88e1xxx_get_link_status,
 };
 
-static struct cphy *mv88e1xxx_phy_create(adapter_t *adapter, int phy_addr,
+static struct cphy *mv88e1xxx_phy_create(struct net_device *dev, int phy_addr,
 					 const struct mdio_ops *mdio_ops)
 {
+	struct adapter *adapter = netdev_priv(dev);
 	struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
 
 	if (!cphy)
 		return NULL;
 
-	cphy_init(cphy, adapter, phy_addr, &mv88e1xxx_ops, mdio_ops);
+	cphy_init(cphy, dev, phy_addr, &mv88e1xxx_ops, mdio_ops);
 
 	/* Configure particular PHY's to run in a different mode. */
 	if ((board_info(adapter)->caps & SUPPORTED_TP) &&
diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c
index cd856041af3..f7136b2fd1e 100644
--- a/drivers/net/chelsio/mv88x201x.c
+++ b/drivers/net/chelsio/mv88x201x.c
@@ -53,7 +53,7 @@ static int led_init(struct cphy *cphy)
 	 * Writing these bits maps control to another
 	 * register. mmd(0x1) addr(0x7)
 	 */
-	mdio_write(cphy, 0x3, 0x8304, 0xdddd);
+	cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8304, 0xdddd);
 	return 0;
 }
 
@@ -62,14 +62,14 @@ static int led_link(struct cphy *cphy, u32 do_enable)
 	u32 led = 0;
 #define LINK_ENABLE_BIT 0x1
 
-	mdio_read(cphy, 0x1, 0x7, &led);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, &led);
 
 	if (do_enable & LINK_ENABLE_BIT) {
 		led |= LINK_ENABLE_BIT;
-		mdio_write(cphy, 0x1, 0x7, led);
+		cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led);
 	} else {
 		led &= ~LINK_ENABLE_BIT;
-		mdio_write(cphy, 0x1, 0x7, led);
+		cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led);
 	}
 	return 0;
 }
@@ -86,7 +86,8 @@ static int mv88x201x_reset(struct cphy *cphy, int wait)
 static int mv88x201x_interrupt_enable(struct cphy *cphy)
 {
 	/* Enable PHY LASI interrupts. */
-	mdio_write(cphy, 0x1, 0x9002, 0x1);
+	cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			MDIO_PMA_LASI_LSALARM);
 
 	/* Enable Marvell interrupts through Elmer0. */
 	if (t1_is_asic(cphy->adapter)) {
@@ -102,7 +103,7 @@ static int mv88x201x_interrupt_enable(struct cphy *cphy)
 static int mv88x201x_interrupt_disable(struct cphy *cphy)
 {
 	/* Disable PHY LASI interrupts. */
-	mdio_write(cphy, 0x1, 0x9002, 0x0);
+	cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0x0);
 
 	/* Disable Marvell interrupts through Elmer0. */
 	if (t1_is_asic(cphy->adapter)) {
@@ -122,25 +123,25 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy)
 
 #ifdef MV88x2010_LINK_STATUS_BUGS
 	/* Required to read twice before clear takes affect. */
-	mdio_read(cphy, 0x1, 0x9003, &val);
-	mdio_read(cphy, 0x1, 0x9004, &val);
-	mdio_read(cphy, 0x1, 0x9005, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
 
 	/* Read this register after the others above it else
 	 * the register doesn't clear correctly.
 	 */
-	mdio_read(cphy, 0x1, 0x1, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
 #endif
 
 	/* Clear link status. */
-	mdio_read(cphy, 0x1, 0x1, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
 	/* Clear PHY LASI interrupts. */
-	mdio_read(cphy, 0x1, 0x9005, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
 
 #ifdef MV88x2010_LINK_STATUS_BUGS
 	/* Do it again. */
-	mdio_read(cphy, 0x1, 0x9003, &val);
-	mdio_read(cphy, 0x1, 0x9004, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
 #endif
 
 	/* Clear Marvell interrupts through Elmer0. */
@@ -172,13 +173,12 @@ static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok,
 				     int *speed, int *duplex, int *fc)
 {
 	u32 val = 0;
-#define LINK_STATUS_BIT 0x4
 
 	if (link_ok) {
 		/* Read link status. */
-		mdio_read(cphy, 0x1, 0x1, &val);
-		val &= LINK_STATUS_BIT;
-		*link_ok = (val == LINK_STATUS_BIT);
+		cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
+		val &= MDIO_STAT1_LSTATUS;
+		*link_ok = (val == MDIO_STAT1_LSTATUS);
 		/* Turn on/off Link LED */
 		led_link(cphy, *link_ok);
 	}
@@ -205,9 +205,11 @@ static struct cphy_ops mv88x201x_ops = {
 	.interrupt_handler = mv88x201x_interrupt_handler,
 	.get_link_status   = mv88x201x_get_link_status,
 	.set_loopback      = mv88x201x_set_loopback,
+	.mmds              = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+			      MDIO_DEVS_PHYXS | MDIO_DEVS_WIS),
 };
 
-static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
+static struct cphy *mv88x201x_phy_create(struct net_device *dev, int phy_addr,
 					 const struct mdio_ops *mdio_ops)
 {
 	u32 val;
@@ -216,15 +218,15 @@ static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
 	if (!cphy)
 		return NULL;
 
-	cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops);
+	cphy_init(cphy, dev, phy_addr, &mv88x201x_ops, mdio_ops);
 
 	/* Commands the PHY to enable XFP's clock. */
-	mdio_read(cphy, 0x3, 0x8300, &val);
-	mdio_write(cphy, 0x3, 0x8300, val | 1);
+	cphy_mdio_read(cphy, MDIO_MMD_PCS, 0x8300, &val);
+	cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8300, val | 1);
 
 	/* Clear link status. Required because of a bug in the PHY.  */
-	mdio_read(cphy, 0x1, 0x8, &val);
-	mdio_read(cphy, 0x3, 0x8, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT2, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PCS, MDIO_STAT2, &val);
 
 	/* Allows for Link,Ack LED turn on/off */
 	led_init(cphy);
diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/chelsio/my3126.c
index 040acd29995..4c6028512d1 100644
--- a/drivers/net/chelsio/my3126.c
+++ b/drivers/net/chelsio/my3126.c
@@ -43,11 +43,11 @@ static int my3126_interrupt_handler(struct cphy *cphy)
 	adapter = cphy->adapter;
 
 	if (cphy->count == 50) {
-		mdio_read(cphy, 0x1, 0x1, &val);
+		cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
 		val16 = (u16) val;
 		status = cphy->bmsr ^ val16;
 
-		if (status & BMSR_LSTATUS)
+		if (status & MDIO_STAT1_LSTATUS)
 			t1_link_changed(adapter, 0);
 		cphy->bmsr = val16;
 
@@ -114,14 +114,14 @@ static int my3126_get_link_status(struct cphy *cphy,
 	adapter_t *adapter;
 
 	adapter = cphy->adapter;
-	mdio_read(cphy, 0x1, 0x1, &val);
+	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
 	val16 = (u16) val;
 
 	/* Populate elmer_gpo with the register value */
 	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
 	cphy->elmer_gpo = val;
 
-	*link_ok = (val16 & BMSR_LSTATUS);
+	*link_ok = (val16 & MDIO_STAT1_LSTATUS);
 
 	if (*link_ok) {
 		/* Turn on the LED. */
@@ -163,9 +163,11 @@ static struct cphy_ops my3126_ops = {
 	.interrupt_handler	= my3126_interrupt_handler,
 	.get_link_status	= my3126_get_link_status,
 	.set_loopback		= my3126_set_loopback,
+	.mmds			= (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+				   MDIO_DEVS_PHYXS),
 };
 
-static struct cphy *my3126_phy_create(adapter_t *adapter,
+static struct cphy *my3126_phy_create(struct net_device *dev,
 			int phy_addr, const struct mdio_ops *mdio_ops)
 {
 	struct cphy *cphy = kzalloc(sizeof (*cphy), GFP_KERNEL);
@@ -173,7 +175,7 @@ static struct cphy *my3126_phy_create(adapter_t *adapter,
 	if (!cphy)
 		return NULL;
 
-	cphy_init(cphy, adapter, phy_addr, &my3126_ops, mdio_ops);
+	cphy_init(cphy, dev, phy_addr, &my3126_ops, mdio_ops);
 	INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
 	cphy->bmsr = 0;
 
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 58f6fc055f6..3711d64e45e 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1149,8 +1149,8 @@ static inline void write_tx_desc(struct cmdQ_e *e, dma_addr_t mapping,
 				 unsigned int len, unsigned int gen,
 				 unsigned int eop)
 {
-	if (unlikely(len > SGE_TX_DESC_MAX_PLEN))
-		BUG();
+	BUG_ON(len > SGE_TX_DESC_MAX_PLEN);
+
 	e->addr_lo = (u32)mapping;
 	e->addr_hi = (u64)mapping >> 32;
 	e->len_gen = V_CMD_LEN(len) | V_CMD_GEN1(gen);
@@ -1879,7 +1879,6 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		cpl->vlan_valid = 0;
 
 send:
-	dev->trans_start = jiffies;
 	ret = t1_sge_tx(skb, adapter, 0, dev);
 
 	/* If transmit busy, and we reallocated skb's due to headroom limit,
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 7adf30230c4..17720c6e5bf 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -284,32 +284,29 @@ static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
 /*
  * Elmer MI1 MDIO read/write operations.
  */
-static int mi1_mdio_read(adapter_t *adapter, int phy_addr, int mmd_addr,
-			 int reg_addr, unsigned int *valp)
+static int mi1_mdio_read(struct net_device *dev, int phy_addr, int mmd_addr,
+			 u16 reg_addr)
 {
+	struct adapter *adapter = dev->ml_priv;
 	u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
-
-	if (mmd_addr)
-		return -EINVAL;
+	unsigned int val;
 
 	spin_lock(&adapter->tpi_lock);
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 	__t1_tpi_write(adapter,
 			A_ELMER0_PORT0_MI1_OP, MI1_OP_DIRECT_READ);
 	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
-	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
+	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, &val);
 	spin_unlock(&adapter->tpi_lock);
-	return 0;
+	return val;
 }
 
-static int mi1_mdio_write(adapter_t *adapter, int phy_addr, int mmd_addr,
-			  int reg_addr, unsigned int val)
+static int mi1_mdio_write(struct net_device *dev, int phy_addr, int mmd_addr,
+			  u16 reg_addr, u16 val)
 {
+	struct adapter *adapter = dev->ml_priv;
 	u32 addr = V_MI1_REG_ADDR(reg_addr) | V_MI1_PHY_ADDR(phy_addr);
 
-	if (mmd_addr)
-		return -EINVAL;
-
 	spin_lock(&adapter->tpi_lock);
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
@@ -324,16 +321,19 @@ static int mi1_mdio_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 static const struct mdio_ops mi1_mdio_ops = {
 	.init = mi1_mdio_init,
 	.read = mi1_mdio_read,
-	.write = mi1_mdio_write
+	.write = mi1_mdio_write,
+	.mode_support = MDIO_SUPPORTS_C22
 };
 #endif
 
 #endif
 
-static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
-			     int reg_addr, unsigned int *valp)
+static int mi1_mdio_ext_read(struct net_device *dev, int phy_addr, int mmd_addr,
+			     u16 reg_addr)
 {
+	struct adapter *adapter = dev->ml_priv;
 	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
+	unsigned int val;
 
 	spin_lock(&adapter->tpi_lock);
 
@@ -350,14 +350,15 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
 	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 
 	/* Read the data. */
-	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
+	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, &val);
 	spin_unlock(&adapter->tpi_lock);
-	return 0;
+	return val;
 }
 
-static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
-			      int reg_addr, unsigned int val)
+static int mi1_mdio_ext_write(struct net_device *dev, int phy_addr,
+			      int mmd_addr, u16 reg_addr, u16 val)
 {
+	struct adapter *adapter = dev->ml_priv;
 	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
 
 	spin_lock(&adapter->tpi_lock);
@@ -380,7 +381,8 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 static const struct mdio_ops mi1_mdio_ext_ops = {
 	.init = mi1_mdio_init,
 	.read = mi1_mdio_ext_read,
-	.write = mi1_mdio_ext_write
+	.write = mi1_mdio_ext_write,
+	.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22
 };
 
 enum {
@@ -1133,8 +1135,8 @@ int __devinit t1_init_sw_modules(adapter_t *adapter,
 		struct cmac *mac;
 		int phy_addr = bi->mdio_phybaseaddr + i;
 
-		adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
-							bi->mdio_ops);
+		adapter->port[i].phy = bi->gphy->create(adapter->port[i].dev,
+							phy_addr, bi->mdio_ops);
 		if (!adapter->port[i].phy) {
 			CH_ERR("%s: PHY %d initialization failed\n",
 			       adapter->name, i);
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 3f476c7c073..58afafbd3b9 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -202,7 +202,7 @@ struct cpmac_priv {
 	void __iomem *regs;
 	struct mii_bus *mii_bus;
 	struct phy_device *phy;
-	char phy_name[BUS_ID_SIZE];
+	char phy_name[MII_BUS_ID_SIZE + 3];
 	int oldlink, oldspeed, oldduplex;
 	u32 msg_enable;
 	struct net_device *dev;
@@ -615,13 +615,13 @@ static void cpmac_end_xmit(struct net_device *dev, int queue)
 
 		dev_kfree_skb_irq(desc->skb);
 		desc->skb = NULL;
-		if (netif_subqueue_stopped(dev, queue))
+		if (__netif_subqueue_stopped(dev, queue))
 			netif_wake_subqueue(dev, queue);
 	} else {
 		if (netif_msg_tx_err(priv) && net_ratelimit())
 			printk(KERN_WARNING
 			       "%s: end_xmit: spurious interrupt\n", dev->name);
-		if (netif_subqueue_stopped(dev, queue))
+		if (__netif_subqueue_stopped(dev, queue))
 			netif_wake_subqueue(dev, queue);
 	}
 }
@@ -731,7 +731,6 @@ static void cpmac_clear_tx(struct net_device *dev)
 
 static void cpmac_hw_error(struct work_struct *work)
 {
-	int i;
 	struct cpmac_priv *priv =
 		container_of(work, struct cpmac_priv, reset_work);
 
@@ -818,7 +817,6 @@ static irqreturn_t cpmac_irq(int irq, void *dev_id)
 
 static void cpmac_tx_timeout(struct net_device *dev)
 {
-	int i;
 	struct cpmac_priv *priv = netdev_priv(dev);
 
 	spin_lock(&priv->lock);
@@ -1093,11 +1091,24 @@ static int cpmac_stop(struct net_device *dev)
 	return 0;
 }
 
+static const struct net_device_ops cpmac_netdev_ops = {
+	.ndo_open		= cpmac_open,
+	.ndo_stop		= cpmac_stop,
+	.ndo_start_xmit		= cpmac_start_xmit,
+	.ndo_tx_timeout		= cpmac_tx_timeout,
+	.ndo_set_multicast_list	= cpmac_set_multicast_list,
+	.ndo_so_ioctl		= cpmac_ioctl,
+	.ndo_set_config		= cpmac_config,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int external_switch;
 
 static int __devinit cpmac_probe(struct platform_device *pdev)
 {
-	int rc, phy_id, i;
+	int rc, phy_id;
 	char *mdio_bus_id = "0";
 	struct resource *mem;
 	struct cpmac_priv *priv;
@@ -1143,14 +1154,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
 
 	dev->irq = platform_get_irq_byname(pdev, "irq");
 
-	dev->open               = cpmac_open;
-	dev->stop               = cpmac_stop;
-	dev->set_config         = cpmac_config;
-	dev->hard_start_xmit    = cpmac_start_xmit;
-	dev->do_ioctl           = cpmac_ioctl;
-	dev->set_multicast_list = cpmac_set_multicast_list;
-	dev->tx_timeout         = cpmac_tx_timeout;
-	dev->ethtool_ops        = &cpmac_ethtool_ops;
+	dev->netdev_ops = &cpmac_netdev_ops;
+	dev->ethtool_ops = &cpmac_ethtool_ops;
 
 	netif_napi_add(dev, &priv->napi, cpmac_poll, 64);
 
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 7433b88eed7..3eee666a9cd 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1551,7 +1551,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
 
 		spin_unlock_irq(&lp->lock);
 		if (net_debug) printk("cs89x0: Tx buffer not free!\n");
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	/* Write the contents of the packet */
 	writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
diff --git a/drivers/net/cxgb3/Makefile b/drivers/net/cxgb3/Makefile
index 34346798532..29aff78c782 100644
--- a/drivers/net/cxgb3/Makefile
+++ b/drivers/net/cxgb3/Makefile
@@ -5,4 +5,4 @@
 obj-$(CONFIG_CHELSIO_T3) += cxgb3.o
 
 cxgb3-objs := cxgb3_main.o ael1002.o vsc8211.o t3_hw.o mc5.o \
-	      xgmac.o sge.o l2t.o cxgb3_offload.o
+	      xgmac.o sge.o l2t.o cxgb3_offload.o aq100x.o
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index c888e97c967..1694fad3872 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -195,7 +195,7 @@ struct sge_qset {		/* an SGE queue set */
 	struct sge_rspq rspq;
 	struct sge_fl fl[SGE_RXQ_PER_SET];
 	struct sge_txq txq[SGE_TXQ_PER_SET];
-	struct napi_gro_fraginfo lro_frag_tbl;
+	int nomem;
 	int lro_enabled;
 	void *lro_va;
 	struct net_device *netdev;
@@ -253,6 +253,8 @@ struct adapter {
 	struct mutex mdio_lock;
 	spinlock_t stats_lock;
 	spinlock_t work_lock;
+
+	struct sk_buff *nofail_skb;
 };
 
 static inline u32 t3_read_reg(struct adapter *adapter, u32 reg_addr)
diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c
index e1b22490ff5..9fe008ec9ba 100644
--- a/drivers/net/cxgb3/ael1002.c
+++ b/drivers/net/cxgb3/ael1002.c
@@ -33,14 +33,6 @@
 #include "regs.h"
 
 enum {
-	PMD_RSD     = 10,   /* PMA/PMD receive signal detect register */
-	PCS_STAT1_X = 24,   /* 10GBASE-X PCS status 1 register */
-	PCS_STAT1_R = 32,   /* 10GBASE-R PCS status 1 register */
-	XS_LN_STAT  = 24    /* XS lane status register */
-};
-
-enum {
-	AEL100X_TX_DISABLE = 9,
 	AEL100X_TX_CONFIG1 = 0xc002,
 	AEL1002_PWR_DOWN_HI = 0xc011,
 	AEL1002_PWR_DOWN_LO = 0xc012,
@@ -52,12 +44,33 @@ enum {
 	AEL_I2C_STAT = 0xc30c,
 	AEL2005_GPIO_CTRL = 0xc214,
 	AEL2005_GPIO_STAT = 0xc215,
+
+	AEL2020_GPIO_INTR   = 0xc103,	/* Latch High (LH) */
+	AEL2020_GPIO_CTRL   = 0xc108,	/* Store Clear (SC) */
+	AEL2020_GPIO_STAT   = 0xc10c,	/* Read Only (RO) */
+	AEL2020_GPIO_CFG    = 0xc110,	/* Read Write (RW) */
+
+	AEL2020_GPIO_SDA    = 0,	/* IN: i2c serial data */
+	AEL2020_GPIO_MODDET = 1,	/* IN: Module Detect */
+	AEL2020_GPIO_0      = 3,	/* IN: unassigned */
+	AEL2020_GPIO_1      = 2,	/* OUT: unassigned */
+	AEL2020_GPIO_LSTAT  = AEL2020_GPIO_1, /* wired to link status LED */
 };
 
 enum { edc_none, edc_sr, edc_twinax };
 
 /* PHY module I2C device address */
-#define MODULE_DEV_ADDR 0xa0
+enum {
+	MODULE_DEV_ADDR	= 0xa0,
+	SFF_DEV_ADDR	= 0xa2,
+};
+
+/* PHY transceiver type */
+enum {
+	phy_transtype_unknown = 0,
+	phy_transtype_sfp     = 3,
+	phy_transtype_xfp     = 6,
+};
 
 #define AEL2005_MODDET_IRQ 4
 
@@ -74,8 +87,8 @@ static int set_phy_regs(struct cphy *phy, const struct reg_val *rv)
 
 	for (err = 0; rv->mmd_addr && !err; rv++) {
 		if (rv->clear_bits == 0xffff)
-			err = mdio_write(phy, rv->mmd_addr, rv->reg_addr,
-					 rv->set_bits);
+			err = t3_mdio_write(phy, rv->mmd_addr, rv->reg_addr,
+					    rv->set_bits);
 		else
 			err = t3_mdio_change_bits(phy, rv->mmd_addr,
 						  rv->reg_addr, rv->clear_bits,
@@ -86,21 +99,54 @@ static int set_phy_regs(struct cphy *phy, const struct reg_val *rv)
 
 static void ael100x_txon(struct cphy *phy)
 {
-	int tx_on_gpio = phy->addr == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL;
+	int tx_on_gpio =
+		phy->mdio.prtad == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL;
 
 	msleep(100);
 	t3_set_reg_field(phy->adapter, A_T3DBG_GPIO_EN, 0, tx_on_gpio);
 	msleep(30);
 }
 
+/*
+ * Read an 8-bit word from a device attached to the PHY's i2c bus.
+ */
+static int ael_i2c_rd(struct cphy *phy, int dev_addr, int word_addr)
+{
+	int i, err;
+	unsigned int stat, data;
+
+	err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL_I2C_CTRL,
+			    (dev_addr << 8) | (1 << 8) | word_addr);
+	if (err)
+		return err;
+
+	for (i = 0; i < 200; i++) {
+		msleep(1);
+		err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_STAT, &stat);
+		if (err)
+			return err;
+		if ((stat & 3) == 1) {
+			err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL_I2C_DATA,
+					   &data);
+			if (err)
+				return err;
+			return data >> 8;
+		}
+	}
+	CH_WARN(phy->adapter, "PHY %u i2c read of dev.addr %#x.%#x timed out\n",
+		phy->mdio.prtad, dev_addr, word_addr);
+	return -ETIMEDOUT;
+}
+
 static int ael1002_power_down(struct cphy *phy, int enable)
 {
 	int err;
 
-	err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_DISABLE, !!enable);
+	err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS, !!enable);
 	if (!err)
-		err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR,
-					  BMCR_PDOWN, enable ? BMCR_PDOWN : 0);
+		err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+				    MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				    MDIO_CTRL1_LPOWER, enable);
 	return err;
 }
 
@@ -109,11 +155,11 @@ static int ael1002_reset(struct cphy *phy, int wait)
 	int err;
 
 	if ((err = ael1002_power_down(phy, 0)) ||
-	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_CONFIG1, 1)) ||
-	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_HI, 0)) ||
-	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_LO, 0)) ||
-	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_XFI_EQL, 0x18)) ||
-	    (err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, AEL1002_LB_EN,
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL100X_TX_CONFIG1, 1)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_PWR_DOWN_HI, 0)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_PWR_DOWN_LO, 0)) ||
+	    (err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL1002_XFI_EQL, 0x18)) ||
+	    (err = t3_mdio_change_bits(phy, MDIO_MMD_PMAPMD, AEL1002_LB_EN,
 				       0, 1 << 5)))
 		return err;
 	return 0;
@@ -132,12 +178,15 @@ static int get_link_status_r(struct cphy *phy, int *link_ok, int *speed,
 {
 	if (link_ok) {
 		unsigned int stat0, stat1, stat2;
-		int err = mdio_read(phy, MDIO_DEV_PMA_PMD, PMD_RSD, &stat0);
+		int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD,
+				       MDIO_PMA_RXDET, &stat0);
 
 		if (!err)
-			err = mdio_read(phy, MDIO_DEV_PCS, PCS_STAT1_R, &stat1);
+			err = t3_mdio_read(phy, MDIO_MMD_PCS,
+					   MDIO_PCS_10GBRT_STAT1, &stat1);
 		if (!err)
-			err = mdio_read(phy, MDIO_DEV_XGXS, XS_LN_STAT, &stat2);
+			err = t3_mdio_read(phy, MDIO_MMD_PHYXS,
+					   MDIO_PHYXS_LNSTAT, &stat2);
 		if (err)
 			return err;
 		*link_ok = (stat0 & stat1 & (stat2 >> 12)) & 1;
@@ -157,6 +206,7 @@ static struct cphy_ops ael1002_ops = {
 	.intr_handler = ael1002_intr_noop,
 	.get_link_status = get_link_status_r,
 	.power_down = ael1002_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
 };
 
 int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
@@ -171,13 +221,13 @@ int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
 
 static int ael1006_reset(struct cphy *phy, int wait)
 {
-	return t3_phy_reset(phy, MDIO_DEV_PMA_PMD, wait);
+	return t3_phy_reset(phy, MDIO_MMD_PMAPMD, wait);
 }
 
 static int ael1006_power_down(struct cphy *phy, int enable)
 {
-	return t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR,
-				   BMCR_PDOWN, enable ? BMCR_PDOWN : 0);
+	return mdio_set_flag(&phy->mdio, phy->mdio.prtad, MDIO_MMD_PMAPMD,
+			     MDIO_CTRL1, MDIO_CTRL1_LPOWER, enable);
 }
 
 static struct cphy_ops ael1006_ops = {
@@ -188,6 +238,7 @@ static struct cphy_ops ael1006_ops = {
 	.intr_handler = t3_phy_lasi_intr_handler,
 	.get_link_status = get_link_status_r,
 	.power_down = ael1006_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
 };
 
 int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
@@ -200,12 +251,57 @@ int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
 	return 0;
 }
 
+/*
+ * Decode our module type.
+ */
+static int ael2xxx_get_module_type(struct cphy *phy, int delay_ms)
+{
+	int v;
+
+	if (delay_ms)
+		msleep(delay_ms);
+
+	/* see SFF-8472 for below */
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 3);
+	if (v < 0)
+		return v;
+
+	if (v == 0x10)
+		return phy_modtype_sr;
+	if (v == 0x20)
+		return phy_modtype_lr;
+	if (v == 0x40)
+		return phy_modtype_lrm;
+
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 6);
+	if (v < 0)
+		return v;
+	if (v != 4)
+		goto unknown;
+
+	v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 10);
+	if (v < 0)
+		return v;
+
+	if (v & 0x80) {
+		v = ael_i2c_rd(phy, MODULE_DEV_ADDR, 0x12);
+		if (v < 0)
+			return v;
+		return v > 10 ? phy_modtype_twinax_long : phy_modtype_twinax;
+	}
+unknown:
+	return phy_modtype_unknown;
+}
+
+/*
+ * Code to support the Aeluros/NetLogic 2005 10Gb PHY.
+ */
 static int ael2005_setup_sr_edc(struct cphy *phy)
 {
 	static struct reg_val regs[] = {
-		{ MDIO_DEV_PMA_PMD, 0xc003, 0xffff, 0x181 },
-		{ MDIO_DEV_PMA_PMD, 0xc010, 0xffff, 0x448a },
-		{ MDIO_DEV_PMA_PMD, 0xc04a, 0xffff, 0x5200 },
+		{ MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x181 },
+		{ MDIO_MMD_PMAPMD, 0xc010, 0xffff, 0x448a },
+		{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5200 },
 		{ 0, 0, 0, 0 }
 	};
 	static u16 sr_edc[] = {
@@ -490,8 +586,8 @@ static int ael2005_setup_sr_edc(struct cphy *phy)
 	msleep(50);
 
 	for (i = 0; i < ARRAY_SIZE(sr_edc) && !err; i += 2)
-		err = mdio_write(phy, MDIO_DEV_PMA_PMD, sr_edc[i],
-				 sr_edc[i + 1]);
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, sr_edc[i],
+				    sr_edc[i + 1]);
 	if (!err)
 		phy->priv = edc_sr;
 	return err;
@@ -500,12 +596,12 @@ static int ael2005_setup_sr_edc(struct cphy *phy)
 static int ael2005_setup_twinax_edc(struct cphy *phy, int modtype)
 {
 	static struct reg_val regs[] = {
-		{ MDIO_DEV_PMA_PMD, 0xc04a, 0xffff, 0x5a00 },
+		{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5a00 },
 		{ 0, 0, 0, 0 }
 	};
 	static struct reg_val preemphasis[] = {
-		{ MDIO_DEV_PMA_PMD, 0xc014, 0xffff, 0xfe16 },
-		{ MDIO_DEV_PMA_PMD, 0xc015, 0xffff, 0xa000 },
+		{ MDIO_MMD_PMAPMD, 0xc014, 0xffff, 0xfe16 },
+		{ MDIO_MMD_PMAPMD, 0xc015, 0xffff, 0xa000 },
 		{ 0, 0, 0, 0 }
 	};
 	static u16 twinax_edc[] = {
@@ -887,132 +983,73 @@ static int ael2005_setup_twinax_edc(struct cphy *phy, int modtype)
 	msleep(50);
 
 	for (i = 0; i < ARRAY_SIZE(twinax_edc) && !err; i += 2)
-		err = mdio_write(phy, MDIO_DEV_PMA_PMD, twinax_edc[i],
-				 twinax_edc[i + 1]);
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, twinax_edc[i],
+				    twinax_edc[i + 1]);
 	if (!err)
 		phy->priv = edc_twinax;
 	return err;
 }
 
-static int ael2005_i2c_rd(struct cphy *phy, int dev_addr, int word_addr)
-{
-	int i, err;
-	unsigned int stat, data;
-
-	err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL_I2C_CTRL,
-			 (dev_addr << 8) | (1 << 8) | word_addr);
-	if (err)
-		return err;
-
-	for (i = 0; i < 5; i++) {
-		msleep(1);
-		err = mdio_read(phy, MDIO_DEV_PMA_PMD, AEL_I2C_STAT, &stat);
-		if (err)
-			return err;
-		if ((stat & 3) == 1) {
-			err = mdio_read(phy, MDIO_DEV_PMA_PMD, AEL_I2C_DATA,
-					&data);
-			if (err)
-				return err;
-			return data >> 8;
-		}
-	}
-	CH_WARN(phy->adapter, "PHY %u I2C read of addr %u timed out\n",
-		phy->addr, word_addr);
-	return -ETIMEDOUT;
-}
-
-static int get_module_type(struct cphy *phy, int delay_ms)
+static int ael2005_get_module_type(struct cphy *phy, int delay_ms)
 {
 	int v;
 	unsigned int stat;
 
-	v = mdio_read(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL, &stat);
+	v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, &stat);
 	if (v)
 		return v;
 
 	if (stat & (1 << 8))			/* module absent */
 		return phy_modtype_none;
 
-	if (delay_ms)
-		msleep(delay_ms);
-
-	/* see SFF-8472 for below */
-	v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 3);
-	if (v < 0)
-		return v;
-
-	if (v == 0x10)
-		return phy_modtype_sr;
-	if (v == 0x20)
-		return phy_modtype_lr;
-	if (v == 0x40)
-		return phy_modtype_lrm;
-
-	v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 6);
-	if (v < 0)
-		return v;
-	if (v != 4)
-		goto unknown;
-
-	v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 10);
-	if (v < 0)
-		return v;
-
-	if (v & 0x80) {
-		v = ael2005_i2c_rd(phy, MODULE_DEV_ADDR, 0x12);
-		if (v < 0)
-			return v;
-		return v > 10 ? phy_modtype_twinax_long : phy_modtype_twinax;
-	}
-unknown:
-	return phy_modtype_unknown;
+	return ael2xxx_get_module_type(phy, delay_ms);
 }
 
 static int ael2005_intr_enable(struct cphy *phy)
 {
-	int err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL, 0x200);
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0x200);
 	return err ? err : t3_phy_lasi_intr_enable(phy);
 }
 
 static int ael2005_intr_disable(struct cphy *phy)
 {
-	int err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL, 0x100);
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0x100);
 	return err ? err : t3_phy_lasi_intr_disable(phy);
 }
 
 static int ael2005_intr_clear(struct cphy *phy)
 {
-	int err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL, 0xd00);
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL, 0xd00);
 	return err ? err : t3_phy_lasi_intr_clear(phy);
 }
 
 static int ael2005_reset(struct cphy *phy, int wait)
 {
 	static struct reg_val regs0[] = {
-		{ MDIO_DEV_PMA_PMD, 0xc001, 0, 1 << 5 },
-		{ MDIO_DEV_PMA_PMD, 0xc017, 0, 1 << 5 },
-		{ MDIO_DEV_PMA_PMD, 0xc013, 0xffff, 0xf341 },
-		{ MDIO_DEV_PMA_PMD, 0xc210, 0xffff, 0x8000 },
-		{ MDIO_DEV_PMA_PMD, 0xc210, 0xffff, 0x8100 },
-		{ MDIO_DEV_PMA_PMD, 0xc210, 0xffff, 0x8000 },
-		{ MDIO_DEV_PMA_PMD, 0xc210, 0xffff, 0 },
+		{ MDIO_MMD_PMAPMD, 0xc001, 0, 1 << 5 },
+		{ MDIO_MMD_PMAPMD, 0xc017, 0, 1 << 5 },
+		{ MDIO_MMD_PMAPMD, 0xc013, 0xffff, 0xf341 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8000 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8100 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0x8000 },
+		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0 },
 		{ 0, 0, 0, 0 }
 	};
 	static struct reg_val regs1[] = {
-		{ MDIO_DEV_PMA_PMD, 0xca00, 0xffff, 0x0080 },
-		{ MDIO_DEV_PMA_PMD, 0xca12, 0xffff, 0 },
+		{ MDIO_MMD_PMAPMD, 0xca00, 0xffff, 0x0080 },
+		{ MDIO_MMD_PMAPMD, 0xca12, 0xffff, 0 },
 		{ 0, 0, 0, 0 }
 	};
 
 	int err;
 	unsigned int lasi_ctrl;
 
-	err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, &lasi_ctrl);
+	err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			   &lasi_ctrl);
 	if (err)
 		return err;
 
-	err = t3_phy_reset(phy, MDIO_DEV_PMA_PMD, 0);
+	err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 0);
 	if (err)
 		return err;
 
@@ -1024,7 +1061,7 @@ static int ael2005_reset(struct cphy *phy, int wait)
 
 	msleep(50);
 
-	err = get_module_type(phy, 0);
+	err = ael2005_get_module_type(phy, 0);
 	if (err < 0)
 		return err;
 	phy->modtype = err;
@@ -1051,18 +1088,18 @@ static int ael2005_intr_handler(struct cphy *phy)
 	unsigned int stat;
 	int ret, edc_needed, cause = 0;
 
-	ret = mdio_read(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_STAT, &stat);
+	ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_STAT, &stat);
 	if (ret)
 		return ret;
 
 	if (stat & AEL2005_MODDET_IRQ) {
-		ret = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL2005_GPIO_CTRL,
-				 0xd00);
+		ret = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2005_GPIO_CTRL,
+				    0xd00);
 		if (ret)
 			return ret;
 
 		/* modules have max 300 ms init time after hot plug */
-		ret = get_module_type(phy, 300);
+		ret = ael2005_get_module_type(phy, 300);
 		if (ret < 0)
 			return ret;
 
@@ -1098,6 +1135,7 @@ static struct cphy_ops ael2005_ops = {
 	.intr_handler    = ael2005_intr_handler,
 	.get_link_status = get_link_status_r,
 	.power_down      = ael1002_power_down,
+	.mmds            = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
 };
 
 int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
@@ -1107,11 +1145,667 @@ int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
 		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
 		  SUPPORTED_IRQ, "10GBASE-R");
 	msleep(125);
-	return t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, AEL_OPT_SETTINGS, 0,
+	return t3_mdio_change_bits(phy, MDIO_MMD_PMAPMD, AEL_OPT_SETTINGS, 0,
 				   1 << 5);
 }
 
 /*
+ * Setup EDC and other parameters for operation with an optical module.
+ */
+static int ael2020_setup_sr_edc(struct cphy *phy)
+{
+	static struct reg_val regs[] = {
+		/* set CDR offset to 10 */
+		{ MDIO_MMD_PMAPMD, 0xcc01, 0xffff, 0x488a },
+
+		/* adjust 10G RX bias current */
+		{ MDIO_MMD_PMAPMD, 0xcb1b, 0xffff, 0x0200 },
+		{ MDIO_MMD_PMAPMD, 0xcb1c, 0xffff, 0x00f0 },
+		{ MDIO_MMD_PMAPMD, 0xcc06, 0xffff, 0x00e0 },
+
+		/* end */
+		{ 0, 0, 0, 0 }
+	};
+	int err;
+
+	err = set_phy_regs(phy, regs);
+	msleep(50);
+	if (err)
+		return err;
+
+	phy->priv = edc_sr;
+	return 0;
+}
+
+/*
+ * Setup EDC and other parameters for operation with an TWINAX module.
+ */
+static int ael2020_setup_twinax_edc(struct cphy *phy, int modtype)
+{
+	/* set uC to 40MHz */
+	static struct reg_val uCclock40MHz[] = {
+		{ MDIO_MMD_PMAPMD, 0xff28, 0xffff, 0x4001 },
+		{ MDIO_MMD_PMAPMD, 0xff2a, 0xffff, 0x0002 },
+		{ 0, 0, 0, 0 }
+	};
+
+	/* activate uC clock */
+	static struct reg_val uCclockActivate[] = {
+		{ MDIO_MMD_PMAPMD, 0xd000, 0xffff, 0x5200 },
+		{ 0, 0, 0, 0 }
+	};
+
+	/* set PC to start of SRAM and activate uC */
+	static struct reg_val uCactivate[] = {
+		{ MDIO_MMD_PMAPMD, 0xd080, 0xffff, 0x0100 },
+		{ MDIO_MMD_PMAPMD, 0xd092, 0xffff, 0x0000 },
+		{ 0, 0, 0, 0 }
+	};
+
+	/* TWINAX EDC firmware */
+	static u16 twinax_edc[] = {
+		0xd800, 0x4009,
+		0xd801, 0x2fff,
+		0xd802, 0x300f,
+		0xd803, 0x40aa,
+		0xd804, 0x401c,
+		0xd805, 0x401e,
+		0xd806, 0x2ff4,
+		0xd807, 0x3dc4,
+		0xd808, 0x2035,
+		0xd809, 0x3035,
+		0xd80a, 0x6524,
+		0xd80b, 0x2cb2,
+		0xd80c, 0x3012,
+		0xd80d, 0x1002,
+		0xd80e, 0x26e2,
+		0xd80f, 0x3022,
+		0xd810, 0x1002,
+		0xd811, 0x27d2,
+		0xd812, 0x3022,
+		0xd813, 0x1002,
+		0xd814, 0x2822,
+		0xd815, 0x3012,
+		0xd816, 0x1002,
+		0xd817, 0x2492,
+		0xd818, 0x3022,
+		0xd819, 0x1002,
+		0xd81a, 0x2772,
+		0xd81b, 0x3012,
+		0xd81c, 0x1002,
+		0xd81d, 0x23d2,
+		0xd81e, 0x3022,
+		0xd81f, 0x1002,
+		0xd820, 0x22cd,
+		0xd821, 0x301d,
+		0xd822, 0x27f2,
+		0xd823, 0x3022,
+		0xd824, 0x1002,
+		0xd825, 0x5553,
+		0xd826, 0x0307,
+		0xd827, 0x2522,
+		0xd828, 0x3022,
+		0xd829, 0x1002,
+		0xd82a, 0x2142,
+		0xd82b, 0x3012,
+		0xd82c, 0x1002,
+		0xd82d, 0x4016,
+		0xd82e, 0x5e63,
+		0xd82f, 0x0344,
+		0xd830, 0x2142,
+		0xd831, 0x3012,
+		0xd832, 0x1002,
+		0xd833, 0x400e,
+		0xd834, 0x2522,
+		0xd835, 0x3022,
+		0xd836, 0x1002,
+		0xd837, 0x2b52,
+		0xd838, 0x3012,
+		0xd839, 0x1002,
+		0xd83a, 0x2742,
+		0xd83b, 0x3022,
+		0xd83c, 0x1002,
+		0xd83d, 0x25e2,
+		0xd83e, 0x3022,
+		0xd83f, 0x1002,
+		0xd840, 0x2fa4,
+		0xd841, 0x3dc4,
+		0xd842, 0x6624,
+		0xd843, 0x414b,
+		0xd844, 0x56b3,
+		0xd845, 0x03c6,
+		0xd846, 0x866b,
+		0xd847, 0x400c,
+		0xd848, 0x2712,
+		0xd849, 0x3012,
+		0xd84a, 0x1002,
+		0xd84b, 0x2c4b,
+		0xd84c, 0x309b,
+		0xd84d, 0x56b3,
+		0xd84e, 0x03c3,
+		0xd84f, 0x866b,
+		0xd850, 0x400c,
+		0xd851, 0x2272,
+		0xd852, 0x3022,
+		0xd853, 0x1002,
+		0xd854, 0x2742,
+		0xd855, 0x3022,
+		0xd856, 0x1002,
+		0xd857, 0x25e2,
+		0xd858, 0x3022,
+		0xd859, 0x1002,
+		0xd85a, 0x2fb4,
+		0xd85b, 0x3dc4,
+		0xd85c, 0x6624,
+		0xd85d, 0x56b3,
+		0xd85e, 0x03c3,
+		0xd85f, 0x866b,
+		0xd860, 0x401c,
+		0xd861, 0x2c45,
+		0xd862, 0x3095,
+		0xd863, 0x5b53,
+		0xd864, 0x2372,
+		0xd865, 0x3012,
+		0xd866, 0x13c2,
+		0xd867, 0x5cc3,
+		0xd868, 0x2712,
+		0xd869, 0x3012,
+		0xd86a, 0x1312,
+		0xd86b, 0x2b52,
+		0xd86c, 0x3012,
+		0xd86d, 0x1002,
+		0xd86e, 0x2742,
+		0xd86f, 0x3022,
+		0xd870, 0x1002,
+		0xd871, 0x2582,
+		0xd872, 0x3022,
+		0xd873, 0x1002,
+		0xd874, 0x2142,
+		0xd875, 0x3012,
+		0xd876, 0x1002,
+		0xd877, 0x628f,
+		0xd878, 0x2985,
+		0xd879, 0x33a5,
+		0xd87a, 0x25e2,
+		0xd87b, 0x3022,
+		0xd87c, 0x1002,
+		0xd87d, 0x5653,
+		0xd87e, 0x03d2,
+		0xd87f, 0x401e,
+		0xd880, 0x6f72,
+		0xd881, 0x1002,
+		0xd882, 0x628f,
+		0xd883, 0x2304,
+		0xd884, 0x3c84,
+		0xd885, 0x6436,
+		0xd886, 0xdff4,
+		0xd887, 0x6436,
+		0xd888, 0x2ff5,
+		0xd889, 0x3005,
+		0xd88a, 0x8656,
+		0xd88b, 0xdfba,
+		0xd88c, 0x56a3,
+		0xd88d, 0xd05a,
+		0xd88e, 0x2972,
+		0xd88f, 0x3012,
+		0xd890, 0x1392,
+		0xd891, 0xd05a,
+		0xd892, 0x56a3,
+		0xd893, 0xdfba,
+		0xd894, 0x0383,
+		0xd895, 0x6f72,
+		0xd896, 0x1002,
+		0xd897, 0x2b45,
+		0xd898, 0x3005,
+		0xd899, 0x4178,
+		0xd89a, 0x5653,
+		0xd89b, 0x0384,
+		0xd89c, 0x2a62,
+		0xd89d, 0x3012,
+		0xd89e, 0x1002,
+		0xd89f, 0x2f05,
+		0xd8a0, 0x3005,
+		0xd8a1, 0x41c8,
+		0xd8a2, 0x5653,
+		0xd8a3, 0x0382,
+		0xd8a4, 0x0002,
+		0xd8a5, 0x4218,
+		0xd8a6, 0x2474,
+		0xd8a7, 0x3c84,
+		0xd8a8, 0x6437,
+		0xd8a9, 0xdff4,
+		0xd8aa, 0x6437,
+		0xd8ab, 0x2ff5,
+		0xd8ac, 0x3c05,
+		0xd8ad, 0x8757,
+		0xd8ae, 0xb888,
+		0xd8af, 0x9787,
+		0xd8b0, 0xdff4,
+		0xd8b1, 0x6724,
+		0xd8b2, 0x866a,
+		0xd8b3, 0x6f72,
+		0xd8b4, 0x1002,
+		0xd8b5, 0x2641,
+		0xd8b6, 0x3021,
+		0xd8b7, 0x1001,
+		0xd8b8, 0xc620,
+		0xd8b9, 0x0000,
+		0xd8ba, 0xc621,
+		0xd8bb, 0x0000,
+		0xd8bc, 0xc622,
+		0xd8bd, 0x00ce,
+		0xd8be, 0xc623,
+		0xd8bf, 0x007f,
+		0xd8c0, 0xc624,
+		0xd8c1, 0x0032,
+		0xd8c2, 0xc625,
+		0xd8c3, 0x0000,
+		0xd8c4, 0xc627,
+		0xd8c5, 0x0000,
+		0xd8c6, 0xc628,
+		0xd8c7, 0x0000,
+		0xd8c8, 0xc62c,
+		0xd8c9, 0x0000,
+		0xd8ca, 0x0000,
+		0xd8cb, 0x2641,
+		0xd8cc, 0x3021,
+		0xd8cd, 0x1001,
+		0xd8ce, 0xc502,
+		0xd8cf, 0x53ac,
+		0xd8d0, 0xc503,
+		0xd8d1, 0x2cd3,
+		0xd8d2, 0xc600,
+		0xd8d3, 0x2a6e,
+		0xd8d4, 0xc601,
+		0xd8d5, 0x2a2c,
+		0xd8d6, 0xc605,
+		0xd8d7, 0x5557,
+		0xd8d8, 0xc60c,
+		0xd8d9, 0x5400,
+		0xd8da, 0xc710,
+		0xd8db, 0x0700,
+		0xd8dc, 0xc711,
+		0xd8dd, 0x0f06,
+		0xd8de, 0xc718,
+		0xd8df, 0x0700,
+		0xd8e0, 0xc719,
+		0xd8e1, 0x0f06,
+		0xd8e2, 0xc720,
+		0xd8e3, 0x4700,
+		0xd8e4, 0xc721,
+		0xd8e5, 0x0f06,
+		0xd8e6, 0xc728,
+		0xd8e7, 0x0700,
+		0xd8e8, 0xc729,
+		0xd8e9, 0x1207,
+		0xd8ea, 0xc801,
+		0xd8eb, 0x7f50,
+		0xd8ec, 0xc802,
+		0xd8ed, 0x7760,
+		0xd8ee, 0xc803,
+		0xd8ef, 0x7fce,
+		0xd8f0, 0xc804,
+		0xd8f1, 0x520e,
+		0xd8f2, 0xc805,
+		0xd8f3, 0x5c11,
+		0xd8f4, 0xc806,
+		0xd8f5, 0x3c51,
+		0xd8f6, 0xc807,
+		0xd8f7, 0x4061,
+		0xd8f8, 0xc808,
+		0xd8f9, 0x49c1,
+		0xd8fa, 0xc809,
+		0xd8fb, 0x3840,
+		0xd8fc, 0xc80a,
+		0xd8fd, 0x0000,
+		0xd8fe, 0xc821,
+		0xd8ff, 0x0002,
+		0xd900, 0xc822,
+		0xd901, 0x0046,
+		0xd902, 0xc844,
+		0xd903, 0x182f,
+		0xd904, 0xc013,
+		0xd905, 0xf341,
+		0xd906, 0xc084,
+		0xd907, 0x0030,
+		0xd908, 0xc904,
+		0xd909, 0x1401,
+		0xd90a, 0xcb0c,
+		0xd90b, 0x0004,
+		0xd90c, 0xcb0e,
+		0xd90d, 0xa00a,
+		0xd90e, 0xcb0f,
+		0xd90f, 0xc0c0,
+		0xd910, 0xcb10,
+		0xd911, 0xc0c0,
+		0xd912, 0xcb11,
+		0xd913, 0x00a0,
+		0xd914, 0xcb12,
+		0xd915, 0x0007,
+		0xd916, 0xc241,
+		0xd917, 0xa000,
+		0xd918, 0xc243,
+		0xd919, 0x7fe0,
+		0xd91a, 0xc604,
+		0xd91b, 0x000e,
+		0xd91c, 0xc609,
+		0xd91d, 0x00f5,
+		0xd91e, 0xc611,
+		0xd91f, 0x000e,
+		0xd920, 0xc660,
+		0xd921, 0x9600,
+		0xd922, 0xc687,
+		0xd923, 0x0004,
+		0xd924, 0xc60a,
+		0xd925, 0x04f5,
+		0xd926, 0x0000,
+		0xd927, 0x2641,
+		0xd928, 0x3021,
+		0xd929, 0x1001,
+		0xd92a, 0xc620,
+		0xd92b, 0x14e5,
+		0xd92c, 0xc621,
+		0xd92d, 0xc53d,
+		0xd92e, 0xc622,
+		0xd92f, 0x3cbe,
+		0xd930, 0xc623,
+		0xd931, 0x4452,
+		0xd932, 0xc624,
+		0xd933, 0xc5c5,
+		0xd934, 0xc625,
+		0xd935, 0xe01e,
+		0xd936, 0xc627,
+		0xd937, 0x0000,
+		0xd938, 0xc628,
+		0xd939, 0x0000,
+		0xd93a, 0xc62c,
+		0xd93b, 0x0000,
+		0xd93c, 0x0000,
+		0xd93d, 0x2b84,
+		0xd93e, 0x3c74,
+		0xd93f, 0x6435,
+		0xd940, 0xdff4,
+		0xd941, 0x6435,
+		0xd942, 0x2806,
+		0xd943, 0x3006,
+		0xd944, 0x8565,
+		0xd945, 0x2b24,
+		0xd946, 0x3c24,
+		0xd947, 0x6436,
+		0xd948, 0x1002,
+		0xd949, 0x2b24,
+		0xd94a, 0x3c24,
+		0xd94b, 0x6436,
+		0xd94c, 0x4045,
+		0xd94d, 0x8656,
+		0xd94e, 0x5663,
+		0xd94f, 0x0302,
+		0xd950, 0x401e,
+		0xd951, 0x1002,
+		0xd952, 0x2807,
+		0xd953, 0x31a7,
+		0xd954, 0x20c4,
+		0xd955, 0x3c24,
+		0xd956, 0x6724,
+		0xd957, 0x1002,
+		0xd958, 0x2807,
+		0xd959, 0x3187,
+		0xd95a, 0x20c4,
+		0xd95b, 0x3c24,
+		0xd95c, 0x6724,
+		0xd95d, 0x1002,
+		0xd95e, 0x24f4,
+		0xd95f, 0x3c64,
+		0xd960, 0x6436,
+		0xd961, 0xdff4,
+		0xd962, 0x6436,
+		0xd963, 0x1002,
+		0xd964, 0x2006,
+		0xd965, 0x3d76,
+		0xd966, 0xc161,
+		0xd967, 0x6134,
+		0xd968, 0x6135,
+		0xd969, 0x5443,
+		0xd96a, 0x0303,
+		0xd96b, 0x6524,
+		0xd96c, 0x00fb,
+		0xd96d, 0x1002,
+		0xd96e, 0x20d4,
+		0xd96f, 0x3c24,
+		0xd970, 0x2025,
+		0xd971, 0x3005,
+		0xd972, 0x6524,
+		0xd973, 0x1002,
+		0xd974, 0xd019,
+		0xd975, 0x2104,
+		0xd976, 0x3c24,
+		0xd977, 0x2105,
+		0xd978, 0x3805,
+		0xd979, 0x6524,
+		0xd97a, 0xdff4,
+		0xd97b, 0x4005,
+		0xd97c, 0x6524,
+		0xd97d, 0x2e8d,
+		0xd97e, 0x303d,
+		0xd97f, 0x2408,
+		0xd980, 0x35d8,
+		0xd981, 0x5dd3,
+		0xd982, 0x0307,
+		0xd983, 0x8887,
+		0xd984, 0x63a7,
+		0xd985, 0x8887,
+		0xd986, 0x63a7,
+		0xd987, 0xdffd,
+		0xd988, 0x00f9,
+		0xd989, 0x1002,
+		0xd98a, 0x0000,
+	};
+	int i, err;
+
+	/* set uC clock and activate it */
+	err = set_phy_regs(phy, uCclock40MHz);
+	msleep(500);
+	if (err)
+		return err;
+	err = set_phy_regs(phy, uCclockActivate);
+	msleep(500);
+	if (err)
+		return err;
+
+	/* write TWINAX EDC firmware into PHY */
+	for (i = 0; i < ARRAY_SIZE(twinax_edc) && !err; i += 2)
+		err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, twinax_edc[i],
+				    twinax_edc[i + 1]);
+	/* activate uC */
+	err = set_phy_regs(phy, uCactivate);
+	if (!err)
+		phy->priv = edc_twinax;
+	return err;
+}
+
+/*
+ * Return Module Type.
+ */
+static int ael2020_get_module_type(struct cphy *phy, int delay_ms)
+{
+	int v;
+	unsigned int stat;
+
+	v = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_STAT, &stat);
+	if (v)
+		return v;
+
+	if (stat & (0x1 << (AEL2020_GPIO_MODDET*4))) {
+		/* module absent */
+		return phy_modtype_none;
+	}
+
+	return ael2xxx_get_module_type(phy, delay_ms);
+}
+
+/*
+ * Enable PHY interrupts.  We enable "Module Detection" interrupts (on any
+ * state transition) and then generic Link Alarm Status Interrupt (LASI).
+ */
+static int ael2020_intr_enable(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+				0x2 << (AEL2020_GPIO_MODDET*4));
+	return err ? err : t3_phy_lasi_intr_enable(phy);
+}
+
+/*
+ * Disable PHY interrupts.  The mirror of the above ...
+ */
+static int ael2020_intr_disable(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+				0x1 << (AEL2020_GPIO_MODDET*4));
+	return err ? err : t3_phy_lasi_intr_disable(phy);
+}
+
+/*
+ * Clear PHY interrupt state.
+ */
+static int ael2020_intr_clear(struct cphy *phy)
+{
+	/*
+	 * The GPIO Interrupt register on the AEL2020 is a "Latching High"
+	 * (LH) register which is cleared to the current state when it's read.
+	 * Thus, we simply read the register and discard the result.
+	 */
+	unsigned int stat;
+	int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat);
+	return err ? err : t3_phy_lasi_intr_clear(phy);
+}
+
+/*
+ * Reset the PHY and put it into a canonical operating state.
+ */
+static int ael2020_reset(struct cphy *phy, int wait)
+{
+	static struct reg_val regs0[] = {
+		/* Erratum #2: CDRLOL asserted, causing PMA link down status */
+		{ MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x3101 },
+
+		/* force XAUI to send LF when RX_LOS is asserted */
+		{ MDIO_MMD_PMAPMD, 0xcd40, 0xffff, 0x0001 },
+
+		/* RX_LOS pin is active high */
+		{ MDIO_MMD_PMAPMD, AEL_OPT_SETTINGS,
+			0x0020, 0x0020 },
+
+		/* output Module's Loss Of Signal (LOS) to LED */
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CFG+AEL2020_GPIO_LSTAT,
+			0xffff, 0x0004 },
+		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+			0xffff, 0x8 << (AEL2020_GPIO_LSTAT*4) },
+
+		/* end */
+		{ 0, 0, 0, 0 }
+	};
+	int err;
+	unsigned int lasi_ctrl;
+
+	/* grab current interrupt state */
+	err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			   &lasi_ctrl);
+	if (err)
+		return err;
+
+	err = t3_phy_reset(phy, MDIO_MMD_PMAPMD, 125);
+	if (err)
+		return err;
+	msleep(100);
+
+	/* basic initialization for all module types */
+	phy->priv = edc_none;
+	err = set_phy_regs(phy, regs0);
+	if (err)
+		return err;
+
+	/* determine module type and perform appropriate initialization */
+	err = ael2020_get_module_type(phy, 0);
+	if (err < 0)
+		return err;
+	phy->modtype = (u8)err;
+	if (err == phy_modtype_twinax || err == phy_modtype_twinax_long)
+		err = ael2020_setup_twinax_edc(phy, err);
+	else
+		err = ael2020_setup_sr_edc(phy);
+	if (err)
+		return err;
+
+	/* reset wipes out interrupts, reenable them if they were on */
+	if (lasi_ctrl & 1)
+		err = ael2005_intr_enable(phy);
+	return err;
+}
+
+/*
+ * Handle a PHY interrupt.
+ */
+static int ael2020_intr_handler(struct cphy *phy)
+{
+	unsigned int stat;
+	int ret, edc_needed, cause = 0;
+
+	ret = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_INTR, &stat);
+	if (ret)
+		return ret;
+
+	if (stat & (0x1 << AEL2020_GPIO_MODDET)) {
+		/* modules have max 300 ms init time after hot plug */
+		ret = ael2020_get_module_type(phy, 300);
+		if (ret < 0)
+			return ret;
+
+		phy->modtype = (u8)ret;
+		if (ret == phy_modtype_none)
+			edc_needed = phy->priv;       /* on unplug retain EDC */
+		else if (ret == phy_modtype_twinax ||
+			 ret == phy_modtype_twinax_long)
+			edc_needed = edc_twinax;
+		else
+			edc_needed = edc_sr;
+
+		if (edc_needed != phy->priv) {
+			ret = ael2020_reset(phy, 0);
+			return ret ? ret : cphy_cause_module_change;
+		}
+		cause = cphy_cause_module_change;
+	}
+
+	ret = t3_phy_lasi_intr_handler(phy);
+	if (ret < 0)
+		return ret;
+
+	ret |= cause;
+	return ret ? ret : cphy_cause_link_change;
+}
+
+static struct cphy_ops ael2020_ops = {
+	.reset           = ael2020_reset,
+	.intr_enable     = ael2020_intr_enable,
+	.intr_disable    = ael2020_intr_disable,
+	.intr_clear      = ael2020_intr_clear,
+	.intr_handler    = ael2020_intr_handler,
+	.get_link_status = get_link_status_r,
+	.power_down      = ael1002_power_down,
+	.mmds		 = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_ael2020_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
+			const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &ael2020_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
+		  SUPPORTED_IRQ, "10GBASE-R");
+	msleep(125);
+	return 0;
+}
+
+/*
  * Get link status for a 10GBASE-X device.
  */
 static int get_link_status_x(struct cphy *phy, int *link_ok, int *speed,
@@ -1119,12 +1813,15 @@ static int get_link_status_x(struct cphy *phy, int *link_ok, int *speed,
 {
 	if (link_ok) {
 		unsigned int stat0, stat1, stat2;
-		int err = mdio_read(phy, MDIO_DEV_PMA_PMD, PMD_RSD, &stat0);
+		int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD,
+				       MDIO_PMA_RXDET, &stat0);
 
 		if (!err)
-			err = mdio_read(phy, MDIO_DEV_PCS, PCS_STAT1_X, &stat1);
+			err = t3_mdio_read(phy, MDIO_MMD_PCS,
+					   MDIO_PCS_10GBX_STAT1, &stat1);
 		if (!err)
-			err = mdio_read(phy, MDIO_DEV_XGXS, XS_LN_STAT, &stat2);
+			err = t3_mdio_read(phy, MDIO_MMD_PHYXS,
+					   MDIO_PHYXS_LNSTAT, &stat2);
 		if (err)
 			return err;
 		*link_ok = (stat0 & (stat1 >> 12) & (stat2 >> 12)) & 1;
@@ -1144,6 +1841,7 @@ static struct cphy_ops qt2045_ops = {
 	.intr_handler = t3_phy_lasi_intr_handler,
 	.get_link_status = get_link_status_x,
 	.power_down = ael1006_power_down,
+	.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
 };
 
 int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
@@ -1159,9 +1857,10 @@ int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
 	 * Some cards where the PHY is supposed to be at address 0 actually
 	 * have it at 1.
 	 */
-	if (!phy_addr && !mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &stat) &&
+	if (!phy_addr &&
+	    !t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &stat) &&
 	    stat == 0xffff)
-		phy->addr = 1;
+		phy->mdio.prtad = 1;
 	return 0;
 }
 
@@ -1175,15 +1874,16 @@ static int xaui_direct_get_link_status(struct cphy *phy, int *link_ok,
 {
 	if (link_ok) {
 		unsigned int status;
+		int prtad = phy->mdio.prtad;
 
 		status = t3_read_reg(phy->adapter,
-				     XGM_REG(A_XGM_SERDES_STAT0, phy->addr)) |
+				     XGM_REG(A_XGM_SERDES_STAT0, prtad)) |
 		    t3_read_reg(phy->adapter,
-				XGM_REG(A_XGM_SERDES_STAT1, phy->addr)) |
+				    XGM_REG(A_XGM_SERDES_STAT1, prtad)) |
 		    t3_read_reg(phy->adapter,
-				XGM_REG(A_XGM_SERDES_STAT2, phy->addr)) |
+				XGM_REG(A_XGM_SERDES_STAT2, prtad)) |
 		    t3_read_reg(phy->adapter,
-				XGM_REG(A_XGM_SERDES_STAT3, phy->addr));
+				XGM_REG(A_XGM_SERDES_STAT3, prtad));
 		*link_ok = !(status & F_LOWSIG0);
 	}
 	if (speed)
@@ -1211,7 +1911,7 @@ static struct cphy_ops xaui_direct_ops = {
 int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
 			    int phy_addr, const struct mdio_ops *mdio_ops)
 {
-	cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops,
+	cphy_init(phy, adapter, MDIO_PRTAD_NONE, &xaui_direct_ops, mdio_ops,
 		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
 		  "10GBASE-CX4");
 	return 0;
diff --git a/drivers/net/cxgb3/aq100x.c b/drivers/net/cxgb3/aq100x.c
new file mode 100644
index 00000000000..b1fd5bf836e
--- /dev/null
+++ b/drivers/net/cxgb3/aq100x.c
@@ -0,0 +1,355 @@
+/*
+ * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "common.h"
+#include "regs.h"
+
+enum {
+	/* MDIO_DEV_PMA_PMD registers */
+	AQ_LINK_STAT	= 0xe800,
+	AQ_IMASK_PMA	= 0xf000,
+
+	/* MDIO_DEV_XGXS registers */
+	AQ_XAUI_RX_CFG	= 0xc400,
+	AQ_XAUI_TX_CFG	= 0xe400,
+
+	/* MDIO_DEV_ANEG registers */
+	AQ_1G_CTRL	= 0xc400,
+	AQ_ANEG_STAT	= 0xc800,
+
+	/* MDIO_DEV_VEND1 registers */
+	AQ_FW_VERSION	= 0x0020,
+	AQ_IFLAG_GLOBAL	= 0xfc00,
+	AQ_IMASK_GLOBAL	= 0xff00,
+};
+
+enum {
+	IMASK_PMA	= 1 << 2,
+	IMASK_GLOBAL	= 1 << 15,
+	ADV_1G_FULL	= 1 << 15,
+	ADV_1G_HALF	= 1 << 14,
+	ADV_10G_FULL	= 1 << 12,
+	AQ_RESET	= (1 << 14) | (1 << 15),
+	AQ_LOWPOWER	= 1 << 12,
+};
+
+static int aq100x_reset(struct cphy *phy, int wait)
+{
+	/*
+	 * Ignore the caller specified wait time; always wait for the reset to
+	 * complete. Can take up to 3s.
+	 */
+	int err = t3_phy_reset(phy, MDIO_MMD_VEND1, 3000);
+
+	if (err)
+		CH_WARN(phy->adapter, "PHY%d: reset failed (0x%x).\n",
+			phy->mdio.prtad, err);
+
+	return err;
+}
+
+static int aq100x_intr_enable(struct cphy *phy)
+{
+	int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AQ_IMASK_PMA, IMASK_PMA);
+	if (err)
+		return err;
+
+	err = t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, IMASK_GLOBAL);
+	return err;
+}
+
+static int aq100x_intr_disable(struct cphy *phy)
+{
+	return t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, 0);
+}
+
+static int aq100x_intr_clear(struct cphy *phy)
+{
+	unsigned int v;
+
+	t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &v);
+	t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);
+
+	return 0;
+}
+
+static int aq100x_intr_handler(struct cphy *phy)
+{
+	int err;
+	unsigned int cause, v;
+
+	err = t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &cause);
+	if (err)
+		return err;
+
+	/* Read (and reset) the latching version of the status */
+	t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);
+
+	return cphy_cause_link_change;
+}
+
+static int aq100x_power_down(struct cphy *phy, int off)
+{
+	return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+			     MDIO_MMD_PMAPMD, MDIO_CTRL1,
+			     MDIO_CTRL1_LPOWER, off);
+}
+
+static int aq100x_autoneg_enable(struct cphy *phy)
+{
+	int err;
+
+	err = aq100x_power_down(phy, 0);
+	if (!err)
+		err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+				    MDIO_MMD_AN, MDIO_CTRL1,
+				    BMCR_ANENABLE | BMCR_ANRESTART, 1);
+
+	return err;
+}
+
+static int aq100x_autoneg_restart(struct cphy *phy)
+{
+	int err;
+
+	err = aq100x_power_down(phy, 0);
+	if (!err)
+		err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+				    MDIO_MMD_AN, MDIO_CTRL1,
+				    BMCR_ANENABLE | BMCR_ANRESTART, 1);
+
+	return err;
+}
+
+static int aq100x_advertise(struct cphy *phy, unsigned int advertise_map)
+{
+	unsigned int adv;
+	int err;
+
+	/* 10G advertisement */
+	adv = 0;
+	if (advertise_map & ADVERTISED_10000baseT_Full)
+		adv |= ADV_10G_FULL;
+	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				  ADV_10G_FULL, adv);
+	if (err)
+		return err;
+
+	/* 1G advertisement */
+	adv = 0;
+	if (advertise_map & ADVERTISED_1000baseT_Full)
+		adv |= ADV_1G_FULL;
+	if (advertise_map & ADVERTISED_1000baseT_Half)
+		adv |= ADV_1G_HALF;
+	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_1G_CTRL,
+				  ADV_1G_FULL | ADV_1G_HALF, adv);
+	if (err)
+		return err;
+
+	/* 100M, pause advertisement */
+	adv = 0;
+	if (advertise_map & ADVERTISED_100baseT_Half)
+		adv |= ADVERTISE_100HALF;
+	if (advertise_map & ADVERTISED_100baseT_Full)
+		adv |= ADVERTISE_100FULL;
+	if (advertise_map & ADVERTISED_Pause)
+		adv |= ADVERTISE_PAUSE_CAP;
+	if (advertise_map & ADVERTISED_Asym_Pause)
+		adv |= ADVERTISE_PAUSE_ASYM;
+	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
+				  0xfe0, adv);
+
+	return err;
+}
+
+static int aq100x_set_loopback(struct cphy *phy, int mmd, int dir, int enable)
+{
+	return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
+			     MDIO_MMD_PMAPMD, MDIO_CTRL1,
+			     BMCR_LOOPBACK, enable);
+}
+
+static int aq100x_set_speed_duplex(struct cphy *phy, int speed, int duplex)
+{
+	/* no can do */
+	return -1;
+}
+
+static int aq100x_get_link_status(struct cphy *phy, int *link_ok,
+				  int *speed, int *duplex, int *fc)
+{
+	int err;
+	unsigned int v;
+
+	if (link_ok) {
+		err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AQ_LINK_STAT, &v);
+		if (err)
+			return err;
+
+		*link_ok = v & 1;
+		if (!*link_ok)
+			return 0;
+	}
+
+	err = t3_mdio_read(phy, MDIO_MMD_AN, AQ_ANEG_STAT, &v);
+	if (err)
+		return err;
+
+	if (speed) {
+		switch (v & 0x6) {
+		case 0x6:
+			*speed = SPEED_10000;
+			break;
+		case 0x4:
+			*speed = SPEED_1000;
+			break;
+		case 0x2:
+			*speed = SPEED_100;
+			break;
+		case 0x0:
+			*speed = SPEED_10;
+			break;
+		}
+	}
+
+	if (duplex)
+		*duplex = v & 1 ? DUPLEX_FULL : DUPLEX_HALF;
+
+	return 0;
+}
+
+static struct cphy_ops aq100x_ops = {
+	.reset             = aq100x_reset,
+	.intr_enable       = aq100x_intr_enable,
+	.intr_disable      = aq100x_intr_disable,
+	.intr_clear        = aq100x_intr_clear,
+	.intr_handler      = aq100x_intr_handler,
+	.autoneg_enable    = aq100x_autoneg_enable,
+	.autoneg_restart   = aq100x_autoneg_restart,
+	.advertise         = aq100x_advertise,
+	.set_loopback      = aq100x_set_loopback,
+	.set_speed_duplex  = aq100x_set_speed_duplex,
+	.get_link_status   = aq100x_get_link_status,
+	.power_down        = aq100x_power_down,
+	.mmds 		   = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
+};
+
+int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
+		       const struct mdio_ops *mdio_ops)
+{
+	unsigned int v, v2, gpio, wait;
+	int err;
+
+	cphy_init(phy, adapter, phy_addr, &aq100x_ops, mdio_ops,
+		  SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full |
+		  SUPPORTED_Autoneg | SUPPORTED_AUI, "1000/10GBASE-T");
+
+	/*
+	 * The PHY has been out of reset ever since the system powered up.  So
+	 * we do a hard reset over here.
+	 */
+	gpio = phy_addr ? F_GPIO10_OUT_VAL : F_GPIO6_OUT_VAL;
+	t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, 0);
+	msleep(1);
+	t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, gpio);
+
+	/*
+	 * Give it enough time to load the firmware and get ready for mdio.
+	 */
+	msleep(1000);
+	wait = 500; /* in 10ms increments */
+	do {
+		err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
+		if (err || v == 0xffff) {
+
+			/* Allow prep_adapter to succeed when ffff is read */
+
+			CH_WARN(adapter, "PHY%d: reset failed (0x%x, 0x%x).\n",
+				phy_addr, err, v);
+			goto done;
+		}
+
+		v &= AQ_RESET;
+		if (v)
+			msleep(10);
+	} while (v && --wait);
+	if (v) {
+		CH_WARN(adapter, "PHY%d: reset timed out (0x%x).\n",
+			phy_addr, v);
+
+		goto done; /* let prep_adapter succeed */
+	}
+
+	/* Datasheet says 3s max but this has been observed */
+	wait = (500 - wait) * 10 + 1000;
+	if (wait > 3000)
+		CH_WARN(adapter, "PHY%d: reset took %ums\n", phy_addr, wait);
+
+	/* Firmware version check. */
+	t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_FW_VERSION, &v);
+	if (v != 30) {
+		CH_WARN(adapter, "PHY%d: unsupported firmware %d\n",
+			phy_addr, v);
+		return 0; /* allow t3_prep_adapter to succeed */
+	}
+
+	/*
+	 * The PHY should start in really-low-power mode.  Prepare it for normal
+	 * operations.
+	 */
+	err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
+	if (err)
+		return err;
+	if (v & AQ_LOWPOWER) {
+		err = t3_mdio_change_bits(phy, MDIO_MMD_VEND1, MDIO_CTRL1,
+					  AQ_LOWPOWER, 0);
+		if (err)
+			return err;
+		msleep(10);
+	} else
+		CH_WARN(adapter, "PHY%d does not start in low power mode.\n",
+			phy_addr);
+
+	/*
+	 * Verify XAUI settings, but let prep succeed no matter what.
+	 */
+	v = v2 = 0;
+	t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_RX_CFG, &v);
+	t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_TX_CFG, &v2);
+	if (v != 0x1b || v2 != 0x1b)
+		CH_WARN(adapter,
+			"PHY%d: incorrect XAUI settings (0x%x, 0x%x).\n",
+			phy_addr, v, v2);
+
+done:
+	return err;
+}
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index e508dc32f3e..d21b705501a 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -39,7 +39,7 @@
 #include <linux/init.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
 #include "version.h"
 
 #define CH_ERR(adap, fmt, ...)   dev_err(&adap->pdev->dev, fmt, ## __VA_ARGS__)
@@ -184,10 +184,11 @@ struct cphy;
 struct adapter;
 
 struct mdio_ops {
-	int (*read)(struct adapter *adapter, int phy_addr, int mmd_addr,
-		    int reg_addr, unsigned int *val);
-	int (*write)(struct adapter *adapter, int phy_addr, int mmd_addr,
-		     int reg_addr, unsigned int val);
+	int (*read)(struct net_device *dev, int phy_addr, int mmd_addr,
+		    u16 reg_addr);
+	int (*write)(struct net_device *dev, int phy_addr, int mmd_addr,
+		     u16 reg_addr, u16 val);
+	unsigned mode_support;
 };
 
 struct adapter_info {
@@ -520,27 +521,6 @@ enum {
 	MAC_RXFIFO_SIZE = 32768
 };
 
-/* IEEE 802.3 specified MDIO devices */
-enum {
-	MDIO_DEV_PMA_PMD = 1,
-	MDIO_DEV_WIS = 2,
-	MDIO_DEV_PCS = 3,
-	MDIO_DEV_XGXS = 4,
-	MDIO_DEV_ANEG = 7,
-	MDIO_DEV_VEND1 = 30,
-	MDIO_DEV_VEND2 = 31
-};
-
-/* LASI control and status registers */
-enum {
-	RX_ALARM_CTRL = 0x9000,
-	TX_ALARM_CTRL = 0x9001,
-	LASI_CTRL = 0x9002,
-	RX_ALARM_STAT = 0x9003,
-	TX_ALARM_STAT = 0x9004,
-	LASI_STAT = 0x9005
-};
-
 /* PHY loopback direction */
 enum {
 	PHY_LOOPBACK_TX = 1,
@@ -583,11 +563,12 @@ struct cphy_ops {
 	int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed,
 			       int *duplex, int *fc);
 	int (*power_down)(struct cphy *phy, int enable);
+
+	u32 mmds;
 };
 
 /* A PHY instance */
 struct cphy {
-	u8 addr;			/* PHY address */
 	u8 modtype;			/* PHY module type */
 	short priv;			/* scratch pad */
 	unsigned int caps;		/* PHY capabilities */
@@ -595,23 +576,23 @@ struct cphy {
 	const char *desc;		/* PHY description */
 	unsigned long fifo_errors;	/* FIFO over/under-flows */
 	const struct cphy_ops *ops;	/* PHY operations */
-	int (*mdio_read)(struct adapter *adapter, int phy_addr, int mmd_addr,
-			 int reg_addr, unsigned int *val);
-	int (*mdio_write)(struct adapter *adapter, int phy_addr, int mmd_addr,
-			  int reg_addr, unsigned int val);
+	struct mdio_if_info mdio;
 };
 
 /* Convenience MDIO read/write wrappers */
-static inline int mdio_read(struct cphy *phy, int mmd, int reg,
-			    unsigned int *valp)
+static inline int t3_mdio_read(struct cphy *phy, int mmd, int reg,
+			       unsigned int *valp)
 {
-	return phy->mdio_read(phy->adapter, phy->addr, mmd, reg, valp);
+	int rc = phy->mdio.mdio_read(phy->mdio.dev, phy->mdio.prtad, mmd, reg);
+	*valp = (rc >= 0) ? rc : -1;
+	return (rc >= 0) ? 0 : rc;
 }
 
-static inline int mdio_write(struct cphy *phy, int mmd, int reg,
-			     unsigned int val)
+static inline int t3_mdio_write(struct cphy *phy, int mmd, int reg,
+				unsigned int val)
 {
-	return phy->mdio_write(phy->adapter, phy->addr, mmd, reg, val);
+	return phy->mdio.mdio_write(phy->mdio.dev, phy->mdio.prtad, mmd,
+				    reg, val);
 }
 
 /* Convenience initializer */
@@ -620,14 +601,16 @@ static inline void cphy_init(struct cphy *phy, struct adapter *adapter,
 			     const struct mdio_ops *mdio_ops,
 			      unsigned int caps, const char *desc)
 {
-	phy->addr = phy_addr;
 	phy->caps = caps;
 	phy->adapter = adapter;
 	phy->desc = desc;
 	phy->ops = phy_ops;
 	if (mdio_ops) {
-		phy->mdio_read = mdio_ops->read;
-		phy->mdio_write = mdio_ops->write;
+		phy->mdio.prtad = phy_addr;
+		phy->mdio.mmds = phy_ops->mmds;
+		phy->mdio.mode_support = mdio_ops->mode_support;
+		phy->mdio.mdio_read = mdio_ops->read;
+		phy->mdio.mdio_write = mdio_ops->write;
 	}
 }
 
@@ -819,8 +802,12 @@ int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
 			int phy_addr, const struct mdio_ops *mdio_ops);
 int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
 			int phy_addr, const struct mdio_ops *mdio_ops);
+int t3_ael2020_phy_prep(struct cphy *phy, struct adapter *adapter,
+			int phy_addr, const struct mdio_ops *mdio_ops);
 int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
 		       const struct mdio_ops *mdio_ops);
 int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
 			    int phy_addr, const struct mdio_ops *mdio_ops);
+int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter,
+			    int phy_addr, const struct mdio_ops *mdio_ops);
 #endif				/* __CHELSIO_COMMON_H */
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 17858b9a583..538dda4422d 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -37,7 +37,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/if_vlan.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
 #include <linux/sockios.h>
 #include <linux/workqueue.h>
 #include <linux/proc_fs.h>
@@ -91,6 +91,8 @@ static const struct pci_device_id cxgb3_pci_tbl[] = {
 	CH_DEVICE(0x31, 3),	/* T3B20 */
 	CH_DEVICE(0x32, 1),	/* T3B02 */
 	CH_DEVICE(0x35, 6),	/* T3C20-derived T3C10 */
+	CH_DEVICE(0x36, 3),	/* S320E-CR */
+	CH_DEVICE(0x37, 7),	/* N320E-G2 */
 	{0,}
 };
 
@@ -431,40 +433,78 @@ static int init_tp_parity(struct adapter *adap)
 	for (i = 0; i < 16; i++) {
 		struct cpl_smt_write_req *req;
 
-		skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+		skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+		if (!skb)
+			skb = adap->nofail_skb;
+		if (!skb)
+			goto alloc_skb_fail;
+
 		req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req));
 		memset(req, 0, sizeof(*req));
 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, i));
 		req->iff = i;
 		t3_mgmt_tx(adap, skb);
+		if (skb == adap->nofail_skb) {
+			await_mgmt_replies(adap, cnt, i + 1);
+			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+			if (!adap->nofail_skb)
+				goto alloc_skb_fail;
+		}
 	}
 
 	for (i = 0; i < 2048; i++) {
 		struct cpl_l2t_write_req *req;
 
-		skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+		skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+		if (!skb)
+			skb = adap->nofail_skb;
+		if (!skb)
+			goto alloc_skb_fail;
+
 		req = (struct cpl_l2t_write_req *)__skb_put(skb, sizeof(*req));
 		memset(req, 0, sizeof(*req));
 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_L2T_WRITE_REQ, i));
 		req->params = htonl(V_L2T_W_IDX(i));
 		t3_mgmt_tx(adap, skb);
+		if (skb == adap->nofail_skb) {
+			await_mgmt_replies(adap, cnt, 16 + i + 1);
+			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+			if (!adap->nofail_skb)
+				goto alloc_skb_fail;
+		}
 	}
 
 	for (i = 0; i < 2048; i++) {
 		struct cpl_rte_write_req *req;
 
-		skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+		skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+		if (!skb)
+			skb = adap->nofail_skb;
+		if (!skb)
+			goto alloc_skb_fail;
+
 		req = (struct cpl_rte_write_req *)__skb_put(skb, sizeof(*req));
 		memset(req, 0, sizeof(*req));
 		req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 		OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RTE_WRITE_REQ, i));
 		req->l2t_idx = htonl(V_L2T_W_IDX(i));
 		t3_mgmt_tx(adap, skb);
+		if (skb == adap->nofail_skb) {
+			await_mgmt_replies(adap, cnt, 16 + 2048 + i + 1);
+			adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+			if (!adap->nofail_skb)
+				goto alloc_skb_fail;
+		}
 	}
 
-	skb = alloc_skb(sizeof(*greq), GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+	if (!skb)
+		skb = adap->nofail_skb;
+	if (!skb)
+		goto alloc_skb_fail;
+
 	greq = (struct cpl_set_tcb_field *)__skb_put(skb, sizeof(*greq));
 	memset(greq, 0, sizeof(*greq));
 	greq->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
@@ -473,8 +513,17 @@ static int init_tp_parity(struct adapter *adap)
 	t3_mgmt_tx(adap, skb);
 
 	i = await_mgmt_replies(adap, cnt, 16 + 2048 + 2048 + 1);
+	if (skb == adap->nofail_skb) {
+		i = await_mgmt_replies(adap, cnt, 16 + 2048 + 2048 + 1);
+		adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
+	}
+
 	t3_tp_set_offload_mode(adap, 0);
 	return i;
+
+alloc_skb_fail:
+	t3_tp_set_offload_mode(adap, 0);
+	return -ENOMEM;
 }
 
 /**
@@ -869,7 +918,12 @@ static int send_pktsched_cmd(struct adapter *adap, int sched, int qidx, int lo,
 	struct mngt_pktsched_wr *req;
 	int ret;
 
-	skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+	if (!skb)
+		skb = adap->nofail_skb;
+	if (!skb)
+		return -ENOMEM;
+
 	req = (struct mngt_pktsched_wr *)skb_put(skb, sizeof(*req));
 	req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_MNGT));
 	req->mngt_opcode = FW_MNGTOPCODE_PKTSCHED_SET;
@@ -879,6 +933,12 @@ static int send_pktsched_cmd(struct adapter *adap, int sched, int qidx, int lo,
 	req->max = hi;
 	req->binding = port;
 	ret = t3_mgmt_tx(adap, skb);
+	if (skb == adap->nofail_skb) {
+		adap->nofail_skb = alloc_skb(sizeof(struct cpl_set_tcb_field),
+					     GFP_KERNEL);
+		if (!adap->nofail_skb)
+			ret = -ENOMEM;
+	}
 
 	return ret;
 }
@@ -1593,7 +1653,7 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	}
 
 	cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
-	cmd->phy_address = p->phy.addr;
+	cmd->phy_address = p->phy.mdio.prtad;
 	cmd->transceiver = XCVR_EXTERNAL;
 	cmd->autoneg = p->link_config.autoneg;
 	cmd->maxtxpkt = 0;
@@ -2308,70 +2368,25 @@ static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
 	struct mii_ioctl_data *data = if_mii(req);
 	struct port_info *pi = netdev_priv(dev);
 	struct adapter *adapter = pi->adapter;
-	int ret, mmd;
 
 	switch (cmd) {
-	case SIOCGMIIPHY:
-		data->phy_id = pi->phy.addr;
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		/* Convert phy_id from older PRTAD/DEVAD format */
+		if (is_10G(adapter) &&
+		    !mdio_phy_id_is_c45(data->phy_id) &&
+		    (data->phy_id & 0x1f00) &&
+		    !(data->phy_id & 0xe0e0))
+			data->phy_id = mdio_phy_id_c45(data->phy_id >> 8,
+						       data->phy_id & 0x1f);
 		/* FALLTHRU */
-	case SIOCGMIIREG:{
-		u32 val;
-		struct cphy *phy = &pi->phy;
-
-		if (!phy->mdio_read)
-			return -EOPNOTSUPP;
-		if (is_10G(adapter)) {
-			mmd = data->phy_id >> 8;
-			if (!mmd)
-				mmd = MDIO_DEV_PCS;
-			else if (mmd > MDIO_DEV_VEND2)
-				return -EINVAL;
-
-			ret =
-				phy->mdio_read(adapter, data->phy_id & 0x1f,
-						mmd, data->reg_num, &val);
-		} else
-			ret =
-				phy->mdio_read(adapter, data->phy_id & 0x1f,
-						0, data->reg_num & 0x1f,
-						&val);
-		if (!ret)
-			data->val_out = val;
-		break;
-	}
-	case SIOCSMIIREG:{
-		struct cphy *phy = &pi->phy;
-
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		if (!phy->mdio_write)
-			return -EOPNOTSUPP;
-		if (is_10G(adapter)) {
-			mmd = data->phy_id >> 8;
-			if (!mmd)
-				mmd = MDIO_DEV_PCS;
-			else if (mmd > MDIO_DEV_VEND2)
-				return -EINVAL;
-
-			ret =
-				phy->mdio_write(adapter,
-						data->phy_id & 0x1f, mmd,
-						data->reg_num,
-						data->val_in);
-		} else
-			ret =
-				phy->mdio_write(adapter,
-						data->phy_id & 0x1f, 0,
-						data->reg_num & 0x1f,
-						data->val_in);
-		break;
-	}
+	case SIOCGMIIPHY:
+		return mdio_mii_ioctl(&pi->phy.mdio, data, cmd);
 	case SIOCCHIOCTL:
 		return cxgb_extension_ioctl(dev, req->ifr_data);
 	default:
 		return -EOPNOTSUPP;
 	}
-	return ret;
 }
 
 static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
@@ -3063,6 +3078,14 @@ static int __devinit init_one(struct pci_dev *pdev,
 		goto out_disable_device;
 	}
 
+	adapter->nofail_skb =
+		alloc_skb(sizeof(struct cpl_set_tcb_field), GFP_KERNEL);
+	if (!adapter->nofail_skb) {
+		dev_err(&pdev->dev, "cannot allocate nofail buffer\n");
+		err = -ENOMEM;
+		goto out_free_adapter;
+	}
+
 	adapter->regs = ioremap_nocache(mmio_start, mmio_len);
 	if (!adapter->regs) {
 		dev_err(&pdev->dev, "cannot map device registers\n");
@@ -3106,7 +3129,6 @@ static int __devinit init_one(struct pci_dev *pdev,
 		netdev->mem_start = mmio_start;
 		netdev->mem_end = mmio_start + mmio_len - 1;
 		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
-		netdev->features |= NETIF_F_LLTX;
 		netdev->features |= NETIF_F_GRO;
 		if (pci_using_dac)
 			netdev->features |= NETIF_F_HIGHDMA;
@@ -3220,6 +3242,8 @@ static void __devexit remove_one(struct pci_dev *pdev)
 				free_netdev(adapter->port[i]);
 
 		iounmap(adapter->regs);
+		if (adapter->nofail_skb)
+			kfree_skb(adapter->nofail_skb);
 		kfree(adapter);
 		pci_release_regions(pdev);
 		pci_disable_device(pdev);
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index 620d80be6aa..f9f54b57b28 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -566,13 +566,31 @@ static void t3_process_tid_release_list(struct work_struct *work)
 		spin_unlock_bh(&td->tid_release_lock);
 
 		skb = alloc_skb(sizeof(struct cpl_tid_release),
-				GFP_KERNEL | __GFP_NOFAIL);
+				GFP_KERNEL);
+		if (!skb)
+			skb = td->nofail_skb;
+		if (!skb) {
+			spin_lock_bh(&td->tid_release_lock);
+			p->ctx = (void *)td->tid_release_list;
+			td->tid_release_list = (struct t3c_tid_entry *)p;
+			break;
+		}
 		mk_tid_release(skb, p - td->tid_maps.tid_tab);
 		cxgb3_ofld_send(tdev, skb);
 		p->ctx = NULL;
+		if (skb == td->nofail_skb)
+			td->nofail_skb =
+				alloc_skb(sizeof(struct cpl_tid_release),
+					GFP_KERNEL);
 		spin_lock_bh(&td->tid_release_lock);
 	}
+	td->release_list_incomplete = (td->tid_release_list == NULL) ? 0 : 1;
 	spin_unlock_bh(&td->tid_release_lock);
+
+	if (!td->nofail_skb)
+		td->nofail_skb =
+			alloc_skb(sizeof(struct cpl_tid_release),
+				GFP_KERNEL);
 }
 
 /* use ctx as a next pointer in the tid release list */
@@ -585,7 +603,7 @@ void cxgb3_queue_tid_release(struct t3cdev *tdev, unsigned int tid)
 	p->ctx = (void *)td->tid_release_list;
 	p->client = NULL;
 	td->tid_release_list = p;
-	if (!p->ctx)
+	if (!p->ctx || td->release_list_incomplete)
 		schedule_work(&td->tid_release_task);
 	spin_unlock_bh(&td->tid_release_lock);
 }
@@ -1274,6 +1292,9 @@ int cxgb3_offload_activate(struct adapter *adapter)
 	if (list_empty(&adapter_list))
 		register_netevent_notifier(&nb);
 
+	t->nofail_skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_KERNEL);
+	t->release_list_incomplete = 0;
+
 	add_adapter(adapter);
 	return 0;
 
@@ -1298,6 +1319,8 @@ void cxgb3_offload_deactivate(struct adapter *adapter)
 	T3C_DATA(tdev) = NULL;
 	t3_free_l2t(L2DATA(tdev));
 	L2DATA(tdev) = NULL;
+	if (t->nofail_skb)
+		kfree_skb(t->nofail_skb);
 	kfree(t);
 }
 
diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/cxgb3/cxgb3_offload.h
index a8e8e5fcdf8..55945f422ae 100644
--- a/drivers/net/cxgb3/cxgb3_offload.h
+++ b/drivers/net/cxgb3/cxgb3_offload.h
@@ -191,6 +191,9 @@ struct t3c_data {
 	struct t3c_tid_entry *tid_release_list;
 	spinlock_t tid_release_lock;
 	struct work_struct tid_release_task;
+
+	struct sk_buff *nofail_skb;
+	unsigned int release_list_incomplete;
 };
 
 /*
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index b3ee2bc1a00..29c79eb43be 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -653,7 +653,8 @@ static void t3_reset_qset(struct sge_qset *q)
 	q->txq_stopped = 0;
 	q->tx_reclaim_timer.function = NULL; /* for t3_stop_sge_timers() */
 	q->rx_reclaim_timer.function = NULL;
-	q->lro_frag_tbl.nr_frags = q->lro_frag_tbl.len = 0;
+	q->nomem = 0;
+	napi_free_frags(&q->napi);
 }
 
 
@@ -1239,7 +1240,6 @@ int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	q = &qs->txq[TXQ_ETH];
 	txq = netdev_get_tx_queue(dev, qidx);
 
-	spin_lock(&q->lock);
 	reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
 
 	credits = q->size - q->in_use;
@@ -1250,7 +1250,6 @@ int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev_err(&adap->pdev->dev,
 			"%s: Tx ring %u full while queue awake!\n",
 			dev->name, q->cntxt_id & 7);
-		spin_unlock(&q->lock);
 		return NETDEV_TX_BUSY;
 	}
 
@@ -1284,9 +1283,6 @@ int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (vlan_tx_tag_present(skb) && pi->vlan_grp)
 		qs->port_stats[SGE_PSTAT_VLANINS]++;
 
-	dev->trans_start = jiffies;
-	spin_unlock(&q->lock);
-
 	/*
 	 * We do not use Tx completion interrupts to free DMAd Tx packets.
 	 * This is good for performamce but means that we rely on new Tx
@@ -2073,20 +2069,19 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 			 struct sge_fl *fl, int len, int complete)
 {
 	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+	struct sk_buff *skb = NULL;
 	struct cpl_rx_pkt *cpl;
-	struct skb_frag_struct *rx_frag = qs->lro_frag_tbl.frags;
-	int nr_frags = qs->lro_frag_tbl.nr_frags;
-	int frag_len = qs->lro_frag_tbl.len;
+	struct skb_frag_struct *rx_frag;
+	int nr_frags;
 	int offset = 0;
 
-	if (!nr_frags) {
-		offset = 2 + sizeof(struct cpl_rx_pkt);
-		qs->lro_va = cpl = sd->pg_chunk.va + 2;
+	if (!qs->nomem) {
+		skb = napi_get_frags(&qs->napi);
+		qs->nomem = !skb;
 	}
 
 	fl->credits--;
 
-	len -= offset;
 	pci_dma_sync_single_for_cpu(adap->pdev,
 				    pci_unmap_addr(sd, dma_addr),
 				    fl->buf_size - SGE_PG_RSVD,
@@ -2099,21 +2094,38 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 			       fl->alloc_size,
 			       PCI_DMA_FROMDEVICE);
 
+	if (!skb) {
+		put_page(sd->pg_chunk.page);
+		if (complete)
+			qs->nomem = 0;
+		return;
+	}
+
+	rx_frag = skb_shinfo(skb)->frags;
+	nr_frags = skb_shinfo(skb)->nr_frags;
+
+	if (!nr_frags) {
+		offset = 2 + sizeof(struct cpl_rx_pkt);
+		qs->lro_va = sd->pg_chunk.va + 2;
+	}
+	len -= offset;
+
 	prefetch(qs->lro_va);
 
 	rx_frag += nr_frags;
 	rx_frag->page = sd->pg_chunk.page;
 	rx_frag->page_offset = sd->pg_chunk.offset + offset;
 	rx_frag->size = len;
-	frag_len += len;
-	qs->lro_frag_tbl.nr_frags++;
-	qs->lro_frag_tbl.len = frag_len;
 
+	skb->len += len;
+	skb->data_len += len;
+	skb->truesize += len;
+	skb_shinfo(skb)->nr_frags++;
 
 	if (!complete)
 		return;
 
-	qs->lro_frag_tbl.ip_summed = CHECKSUM_UNNECESSARY;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	cpl = qs->lro_va;
 
 	if (unlikely(cpl->vlan_valid)) {
@@ -2122,15 +2134,11 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 		struct vlan_group *grp = pi->vlan_grp;
 
 		if (likely(grp != NULL)) {
-			vlan_gro_frags(&qs->napi, grp, ntohs(cpl->vlan),
-				       &qs->lro_frag_tbl);
-			goto out;
+			vlan_gro_frags(&qs->napi, grp, ntohs(cpl->vlan));
+			return;
 		}
 	}
-	napi_gro_frags(&qs->napi, &qs->lro_frag_tbl);
-
-out:
-	qs->lro_frag_tbl.nr_frags = qs->lro_frag_tbl.len = 0;
+	napi_gro_frags(&qs->napi);
 }
 
 /**
@@ -2299,8 +2307,6 @@ no_mem:
 			if (fl->use_pages) {
 				void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
 
-				prefetch(&qs->lro_frag_tbl);
-
 				prefetch(addr);
 #if L1_CACHE_BYTES < 128
 				prefetch(addr + L1_CACHE_BYTES);
@@ -2846,11 +2852,12 @@ static void sge_timer_tx(unsigned long data)
 	unsigned int tbd[SGE_TXQ_PER_SET] = {0, 0};
 	unsigned long next_period;
 
-	if (spin_trylock(&qs->txq[TXQ_ETH].lock)) {
-		tbd[TXQ_ETH] = reclaim_completed_tx(adap, &qs->txq[TXQ_ETH],
-						    TX_RECLAIM_TIMER_CHUNK);
-		spin_unlock(&qs->txq[TXQ_ETH].lock);
+	if (__netif_tx_trylock(qs->tx_q)) {
+                tbd[TXQ_ETH] = reclaim_completed_tx(adap, &qs->txq[TXQ_ETH],
+                                                     TX_RECLAIM_TIMER_CHUNK);
+		__netif_tx_unlock(qs->tx_q);
 	}
+
 	if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
 		tbd[TXQ_OFLD] = reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD],
 						     TX_RECLAIM_TIMER_CHUNK);
@@ -2858,8 +2865,8 @@ static void sge_timer_tx(unsigned long data)
 	}
 
 	next_period = TX_RECLAIM_PERIOD >>
-		      (max(tbd[TXQ_ETH], tbd[TXQ_OFLD]) /
-		       TX_RECLAIM_TIMER_CHUNK);
+                      (max(tbd[TXQ_ETH], tbd[TXQ_OFLD]) /
+                      TX_RECLAIM_TIMER_CHUNK);
 	mod_timer(&qs->tx_reclaim_timer, jiffies + next_period);
 }
 
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 4950d5d789a..870d44992c7 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -204,35 +204,33 @@ static void mi1_init(struct adapter *adap, const struct adapter_info *ai)
 /*
  * MI1 read/write operations for clause 22 PHYs.
  */
-static int t3_mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
-		       int reg_addr, unsigned int *valp)
+static int t3_mi1_read(struct net_device *dev, int phy_addr, int mmd_addr,
+		       u16 reg_addr)
 {
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adapter = pi->adapter;
 	int ret;
 	u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
 
-	if (mmd_addr)
-		return -EINVAL;
-
 	mutex_lock(&adapter->mdio_lock);
 	t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1));
 	t3_write_reg(adapter, A_MI1_ADDR, addr);
 	t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(2));
 	ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 10);
 	if (!ret)
-		*valp = t3_read_reg(adapter, A_MI1_DATA);
+		ret = t3_read_reg(adapter, A_MI1_DATA);
 	mutex_unlock(&adapter->mdio_lock);
 	return ret;
 }
 
-static int t3_mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
-		     int reg_addr, unsigned int val)
+static int t3_mi1_write(struct net_device *dev, int phy_addr, int mmd_addr,
+			u16 reg_addr, u16 val)
 {
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adapter = pi->adapter;
 	int ret;
 	u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
 
-	if (mmd_addr)
-		return -EINVAL;
-
 	mutex_lock(&adapter->mdio_lock);
 	t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1));
 	t3_write_reg(adapter, A_MI1_ADDR, addr);
@@ -244,8 +242,9 @@ static int t3_mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
 }
 
 static const struct mdio_ops mi1_mdio_ops = {
-	t3_mi1_read,
-	t3_mi1_write
+	.read = t3_mi1_read,
+	.write = t3_mi1_write,
+	.mode_support = MDIO_SUPPORTS_C22
 };
 
 /*
@@ -268,9 +267,11 @@ static int mi1_wr_addr(struct adapter *adapter, int phy_addr, int mmd_addr,
 /*
  * MI1 read/write operations for indirect-addressed PHYs.
  */
-static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr,
-			int reg_addr, unsigned int *valp)
+static int mi1_ext_read(struct net_device *dev, int phy_addr, int mmd_addr,
+			u16 reg_addr)
 {
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adapter = pi->adapter;
 	int ret;
 
 	mutex_lock(&adapter->mdio_lock);
@@ -280,15 +281,17 @@ static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr,
 		ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
 				      MDIO_ATTEMPTS, 10);
 		if (!ret)
-			*valp = t3_read_reg(adapter, A_MI1_DATA);
+			ret = t3_read_reg(adapter, A_MI1_DATA);
 	}
 	mutex_unlock(&adapter->mdio_lock);
 	return ret;
 }
 
-static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr,
-			 int reg_addr, unsigned int val)
+static int mi1_ext_write(struct net_device *dev, int phy_addr, int mmd_addr,
+			 u16 reg_addr, u16 val)
 {
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adapter = pi->adapter;
 	int ret;
 
 	mutex_lock(&adapter->mdio_lock);
@@ -304,8 +307,9 @@ static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr,
 }
 
 static const struct mdio_ops mi1_mdio_ext_ops = {
-	mi1_ext_read,
-	mi1_ext_write
+	.read = mi1_ext_read,
+	.write = mi1_ext_write,
+	.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22
 };
 
 /**
@@ -325,10 +329,10 @@ int t3_mdio_change_bits(struct cphy *phy, int mmd, int reg, unsigned int clear,
 	int ret;
 	unsigned int val;
 
-	ret = mdio_read(phy, mmd, reg, &val);
+	ret = t3_mdio_read(phy, mmd, reg, &val);
 	if (!ret) {
 		val &= ~clear;
-		ret = mdio_write(phy, mmd, reg, val | set);
+		ret = t3_mdio_write(phy, mmd, reg, val | set);
 	}
 	return ret;
 }
@@ -348,15 +352,16 @@ int t3_phy_reset(struct cphy *phy, int mmd, int wait)
 	int err;
 	unsigned int ctl;
 
-	err = t3_mdio_change_bits(phy, mmd, MII_BMCR, BMCR_PDOWN, BMCR_RESET);
+	err = t3_mdio_change_bits(phy, mmd, MDIO_CTRL1, MDIO_CTRL1_LPOWER,
+				  MDIO_CTRL1_RESET);
 	if (err || !wait)
 		return err;
 
 	do {
-		err = mdio_read(phy, mmd, MII_BMCR, &ctl);
+		err = t3_mdio_read(phy, mmd, MDIO_CTRL1, &ctl);
 		if (err)
 			return err;
-		ctl &= BMCR_RESET;
+		ctl &= MDIO_CTRL1_RESET;
 		if (ctl)
 			msleep(1);
 	} while (ctl && --wait);
@@ -377,7 +382,7 @@ int t3_phy_advertise(struct cphy *phy, unsigned int advert)
 	int err;
 	unsigned int val = 0;
 
-	err = mdio_read(phy, 0, MII_CTRL1000, &val);
+	err = t3_mdio_read(phy, MDIO_DEVAD_NONE, MII_CTRL1000, &val);
 	if (err)
 		return err;
 
@@ -387,7 +392,7 @@ int t3_phy_advertise(struct cphy *phy, unsigned int advert)
 	if (advert & ADVERTISED_1000baseT_Full)
 		val |= ADVERTISE_1000FULL;
 
-	err = mdio_write(phy, 0, MII_CTRL1000, val);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, MII_CTRL1000, val);
 	if (err)
 		return err;
 
@@ -404,7 +409,7 @@ int t3_phy_advertise(struct cphy *phy, unsigned int advert)
 		val |= ADVERTISE_PAUSE_CAP;
 	if (advert & ADVERTISED_Asym_Pause)
 		val |= ADVERTISE_PAUSE_ASYM;
-	return mdio_write(phy, 0, MII_ADVERTISE, val);
+	return t3_mdio_write(phy, MDIO_DEVAD_NONE, MII_ADVERTISE, val);
 }
 
 /**
@@ -427,7 +432,7 @@ int t3_phy_advertise_fiber(struct cphy *phy, unsigned int advert)
 		val |= ADVERTISE_1000XPAUSE;
 	if (advert & ADVERTISED_Asym_Pause)
 		val |= ADVERTISE_1000XPSE_ASYM;
-	return mdio_write(phy, 0, MII_ADVERTISE, val);
+	return t3_mdio_write(phy, MDIO_DEVAD_NONE, MII_ADVERTISE, val);
 }
 
 /**
@@ -444,7 +449,7 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
 	int err;
 	unsigned int ctl;
 
-	err = mdio_read(phy, 0, MII_BMCR, &ctl);
+	err = t3_mdio_read(phy, MDIO_DEVAD_NONE, MII_BMCR, &ctl);
 	if (err)
 		return err;
 
@@ -462,34 +467,36 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
 	}
 	if (ctl & BMCR_SPEED1000) /* auto-negotiation required for GigE */
 		ctl |= BMCR_ANENABLE;
-	return mdio_write(phy, 0, MII_BMCR, ctl);
+	return t3_mdio_write(phy, MDIO_DEVAD_NONE, MII_BMCR, ctl);
 }
 
 int t3_phy_lasi_intr_enable(struct cphy *phy)
 {
-	return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 1);
+	return t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			     MDIO_PMA_LASI_LSALARM);
 }
 
 int t3_phy_lasi_intr_disable(struct cphy *phy)
 {
-	return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 0);
+	return t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0);
 }
 
 int t3_phy_lasi_intr_clear(struct cphy *phy)
 {
 	u32 val;
 
-	return mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &val);
+	return t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
 }
 
 int t3_phy_lasi_intr_handler(struct cphy *phy)
 {
 	unsigned int status;
-	int err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &status);
+	int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT,
+			       &status);
 
 	if (err)
 		return err;
-	return (status & 1) ?  cphy_cause_link_change : 0;
+	return (status & MDIO_PMA_LASI_LSALARM) ? cphy_cause_link_change : 0;
 }
 
 static const struct adapter_info t3_adap_info[] = {
@@ -519,6 +526,11 @@ static const struct adapter_info t3_adap_info[] = {
 	 F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
 	 { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
 	 &mi1_mdio_ext_ops, "Chelsio T310" },
+	{1, 0, 0,
+	 F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN |
+	 F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL,
+	 { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
+	 &mi1_mdio_ext_ops, "Chelsio N320E-G2" },
 };
 
 /*
@@ -545,6 +557,8 @@ static const struct port_type_info port_types[] = {
 	{ t3_qt2045_phy_prep },
 	{ t3_ael1006_phy_prep },
 	{ NULL },
+	{ t3_aq100x_phy_prep },
+	{ t3_ael2020_phy_prep },
 };
 
 #define VPD_ENTRY(name, len) \
@@ -3864,6 +3878,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
 			return -EINVAL;
 		}
 
+		p->phy.mdio.dev = adapter->port[i];
 		ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
 				    ai->mdio_ops);
 		if (ret)
@@ -3923,7 +3938,7 @@ int t3_replay_prep_adapter(struct adapter *adapter)
 			;
 
 		pti = &port_types[adapter->params.vpd.port_type[j]];
-		ret = pti->phy_prep(&p->phy, adapter, p->phy.addr, NULL);
+		ret = pti->phy_prep(&p->phy, adapter, p->phy.mdio.prtad, NULL);
 		if (ret)
 			return ret;
 		p->phy.ops->power_down(&p->phy, 1);
diff --git a/drivers/net/cxgb3/version.h b/drivers/net/cxgb3/version.h
index 7bf963ec554..9d0bd9dd9ab 100644
--- a/drivers/net/cxgb3/version.h
+++ b/drivers/net/cxgb3/version.h
@@ -35,10 +35,10 @@
 #define DRV_DESC "Chelsio T3 Network Driver"
 #define DRV_NAME "cxgb3"
 /* Driver version */
-#define DRV_VERSION "1.1.2-ko"
+#define DRV_VERSION "1.1.3-ko"
 
 /* Firmware version */
 #define FW_VERSION_MAJOR 7
-#define FW_VERSION_MINOR 1
+#define FW_VERSION_MINOR 4
 #define FW_VERSION_MICRO 0
 #endif				/* __CHELSIO_VERSION_H */
diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/cxgb3/vsc8211.c
index d07130971b8..4f9a1c2724f 100644
--- a/drivers/net/cxgb3/vsc8211.c
+++ b/drivers/net/cxgb3/vsc8211.c
@@ -91,17 +91,18 @@ enum {
  */
 static int vsc8211_reset(struct cphy *cphy, int wait)
 {
-	return t3_phy_reset(cphy, 0, 0);
+	return t3_phy_reset(cphy, MDIO_DEVAD_NONE, 0);
 }
 
 static int vsc8211_intr_enable(struct cphy *cphy)
 {
-	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK);
+	return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE,
+			     INTR_MASK);
 }
 
 static int vsc8211_intr_disable(struct cphy *cphy)
 {
-	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0);
+	return t3_mdio_write(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_ENABLE, 0);
 }
 
 static int vsc8211_intr_clear(struct cphy *cphy)
@@ -109,18 +110,20 @@ static int vsc8211_intr_clear(struct cphy *cphy)
 	u32 val;
 
 	/* Clear PHY interrupts by reading the register. */
-	return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val);
+	return t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &val);
 }
 
 static int vsc8211_autoneg_enable(struct cphy *cphy)
 {
-	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
+	return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
+				   BMCR_PDOWN | BMCR_ISOLATE,
 				   BMCR_ANENABLE | BMCR_ANRESTART);
 }
 
 static int vsc8211_autoneg_restart(struct cphy *cphy)
 {
-	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
+	return t3_mdio_change_bits(cphy, MDIO_DEVAD_NONE, MII_BMCR,
+				   BMCR_PDOWN | BMCR_ISOLATE,
 				   BMCR_ANRESTART);
 }
 
@@ -130,9 +133,9 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 	unsigned int bmcr, status, lpa, adv;
 	int err, sp = -1, dplx = -1, pause = 0;
 
-	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
+	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
 	if (!err)
-		err = mdio_read(cphy, 0, MII_BMSR, &status);
+		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
 	if (err)
 		return err;
 
@@ -142,7 +145,8 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 		 * once more to get the current link state.
 		 */
 		if (!(status & BMSR_LSTATUS))
-			err = mdio_read(cphy, 0, MII_BMSR, &status);
+			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
+					   &status);
 		if (err)
 			return err;
 		*link_ok = (status & BMSR_LSTATUS) != 0;
@@ -156,7 +160,8 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 		else
 			sp = SPEED_10;
 	} else if (status & BMSR_ANEGCOMPLETE) {
-		err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status);
+		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_AUX_CTRL_STAT,
+				   &status);
 		if (err)
 			return err;
 
@@ -170,9 +175,11 @@ static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 			sp = SPEED_1000;
 
 		if (fc && dplx == DUPLEX_FULL) {
-			err = mdio_read(cphy, 0, MII_LPA, &lpa);
+			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA,
+					   &lpa);
 			if (!err)
-				err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
+				err = t3_mdio_read(cphy, MDIO_DEVAD_NONE,
+						   MII_ADVERTISE, &adv);
 			if (err)
 				return err;
 
@@ -202,9 +209,9 @@ static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 	unsigned int bmcr, status, lpa, adv;
 	int err, sp = -1, dplx = -1, pause = 0;
 
-	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
+	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMCR, &bmcr);
 	if (!err)
-		err = mdio_read(cphy, 0, MII_BMSR, &status);
+		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR, &status);
 	if (err)
 		return err;
 
@@ -214,7 +221,8 @@ static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 		 * once more to get the current link state.
 		 */
 		if (!(status & BMSR_LSTATUS))
-			err = mdio_read(cphy, 0, MII_BMSR, &status);
+			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_BMSR,
+					   &status);
 		if (err)
 			return err;
 		*link_ok = (status & BMSR_LSTATUS) != 0;
@@ -228,9 +236,10 @@ static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 		else
 			sp = SPEED_10;
 	} else if (status & BMSR_ANEGCOMPLETE) {
-		err = mdio_read(cphy, 0, MII_LPA, &lpa);
+		err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_LPA, &lpa);
 		if (!err)
-			err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
+			err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, MII_ADVERTISE,
+					   &adv);
 		if (err)
 			return err;
 
@@ -270,23 +279,23 @@ static int vsc8211_set_automdi(struct cphy *phy, int enable)
 {
 	int err;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0x52b5);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0x52b5);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, 18, 0x12);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 18, 0x12);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, 17, enable ? 0x2803 : 0x3003);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 17, enable ? 0x2803 : 0x3003);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, 16, 0x87fa);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, 16, 0x87fa);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
 	if (err)
 		return err;
 
@@ -315,7 +324,7 @@ static int vsc8211_intr_handler(struct cphy *cphy)
 	unsigned int cause;
 	int err, cphy_cause = 0;
 
-	err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause);
+	err = t3_mdio_read(cphy, MDIO_DEVAD_NONE, VSC8211_INTR_STATUS, &cause);
 	if (err)
 		return err;
 
@@ -367,12 +376,13 @@ int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
 		  SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
 	msleep(20);       /* PHY needs ~10ms to start responding to MDIO */
 
-	err = mdio_read(phy, 0, VSC8211_EXT_CTRL, &val);
+	err = t3_mdio_read(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL, &val);
 	if (err)
 		return err;
 	if (val & VSC_CTRL_MEDIA_MODE_HI) {
 		/* copper interface, just need to configure the LEDs */
-		return mdio_write(phy, 0, VSC8211_LED_CTRL, 0x100);
+		return t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_LED_CTRL,
+				     0x100);
 	}
 
 	phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
@@ -380,20 +390,20 @@ int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
 	phy->desc = "1000BASE-X";
 	phy->ops = &vsc8211_fiber_ops;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 1);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 1);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, VSC8211_SIGDET_CTRL, 1);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_SIGDET_CTRL, 1);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_PAGE_AXS, 0);
 	if (err)
 		return err;
 
-	err = mdio_write(phy, 0, VSC8211_EXT_CTRL,
-			 val | VSC_CTRL_CLAUSE37_VIEW);
+	err = t3_mdio_write(phy, MDIO_DEVAD_NONE, VSC8211_EXT_CTRL,
+			    val | VSC_CTRL_CLAUSE37_VIEW);
 	if (err)
 		return err;
 
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
new file mode 100644
index 00000000000..0e9b9f9632c
--- /dev/null
+++ b/drivers/net/davinci_emac.c
@@ -0,0 +1,2830 @@
+/*
+ * DaVinci Ethernet Medium Access Controller
+ *
+ * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ---------------------------------------------------------------------------
+ * History:
+ * 0-5 A number of folks worked on this driver in bits and pieces but the major
+ *     contribution came from Suraj Iyer and Anant Gole
+ * 6.0 Anant Gole - rewrote the driver as per Linux conventions
+ * 6.1 Chaithrika U S - added support for Gigabit and RMII features,
+ *     PHY layer usage
+ */
+
+/** Pending Items in this driver:
+ * 1. Use Linux cache infrastcture for DMA'ed memory (dma_xxx functions)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/highmem.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+#include <linux/version.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/semaphore.h>
+#include <linux/phy.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+#include <asm/page.h>
+
+#include <mach/emac.h>
+
+static int debug_level;
+module_param(debug_level, int, 0);
+MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)");
+
+/* Netif debug messages possible */
+#define DAVINCI_EMAC_DEBUG	(NETIF_MSG_DRV | \
+				NETIF_MSG_PROBE | \
+				NETIF_MSG_LINK | \
+				NETIF_MSG_TIMER | \
+				NETIF_MSG_IFDOWN | \
+				NETIF_MSG_IFUP | \
+				NETIF_MSG_RX_ERR | \
+				NETIF_MSG_TX_ERR | \
+				NETIF_MSG_TX_QUEUED | \
+				NETIF_MSG_INTR | \
+				NETIF_MSG_TX_DONE | \
+				NETIF_MSG_RX_STATUS | \
+				NETIF_MSG_PKTDATA | \
+				NETIF_MSG_HW | \
+				NETIF_MSG_WOL)
+
+/* version info */
+#define EMAC_MAJOR_VERSION	6
+#define EMAC_MINOR_VERSION	1
+#define EMAC_MODULE_VERSION	"6.1"
+MODULE_VERSION(EMAC_MODULE_VERSION);
+static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
+
+/* Configuration items */
+#define EMAC_DEF_PASS_CRC		(0) /* Do not pass CRC upto frames */
+#define EMAC_DEF_QOS_EN			(0) /* EMAC proprietary QoS disabled */
+#define EMAC_DEF_NO_BUFF_CHAIN		(0) /* No buffer chain */
+#define EMAC_DEF_MACCTRL_FRAME_EN	(0) /* Discard Maccontrol frames */
+#define EMAC_DEF_SHORT_FRAME_EN		(0) /* Discard short frames */
+#define EMAC_DEF_ERROR_FRAME_EN		(0) /* Discard error frames */
+#define EMAC_DEF_PROM_EN		(0) /* Promiscous disabled */
+#define EMAC_DEF_PROM_CH		(0) /* Promiscous channel is 0 */
+#define EMAC_DEF_BCAST_EN		(1) /* Broadcast enabled */
+#define EMAC_DEF_BCAST_CH		(0) /* Broadcast channel is 0 */
+#define EMAC_DEF_MCAST_EN		(1) /* Multicast enabled */
+#define EMAC_DEF_MCAST_CH		(0) /* Multicast channel is 0 */
+
+#define EMAC_DEF_TXPRIO_FIXED		(1) /* TX Priority is fixed */
+#define EMAC_DEF_TXPACING_EN		(0) /* TX pacing NOT supported*/
+
+#define EMAC_DEF_BUFFER_OFFSET		(0) /* Buffer offset to DMA (future) */
+#define EMAC_DEF_MIN_ETHPKTSIZE		(60) /* Minimum ethernet pkt size */
+#define EMAC_DEF_MAX_FRAME_SIZE		(1500 + 14 + 4 + 4)
+#define EMAC_DEF_TX_CH			(0) /* Default 0th channel */
+#define EMAC_DEF_RX_CH			(0) /* Default 0th channel */
+#define EMAC_DEF_MDIO_TICK_MS		(10) /* typically 1 tick=1 ms) */
+#define EMAC_DEF_MAX_TX_CH		(1) /* Max TX channels configured */
+#define EMAC_DEF_MAX_RX_CH		(1) /* Max RX channels configured */
+#define EMAC_POLL_WEIGHT		(64) /* Default NAPI poll weight */
+
+/* Buffer descriptor parameters */
+#define EMAC_DEF_TX_MAX_SERVICE		(32) /* TX max service BD's */
+#define EMAC_DEF_RX_MAX_SERVICE		(64) /* should = netdev->weight */
+
+/* EMAC register related defines */
+#define EMAC_ALL_MULTI_REG_VALUE	(0xFFFFFFFF)
+#define EMAC_NUM_MULTICAST_BITS		(64)
+#define EMAC_TEARDOWN_VALUE		(0xFFFFFFFC)
+#define EMAC_TX_CONTROL_TX_ENABLE_VAL	(0x1)
+#define EMAC_RX_CONTROL_RX_ENABLE_VAL	(0x1)
+#define EMAC_MAC_HOST_ERR_INTMASK_VAL	(0x2)
+#define EMAC_RX_UNICAST_CLEAR_ALL	(0xFF)
+#define EMAC_INT_MASK_CLEAR		(0xFF)
+
+/* RX MBP register bit positions */
+#define EMAC_RXMBP_PASSCRC_MASK		BIT(30)
+#define EMAC_RXMBP_QOSEN_MASK		BIT(29)
+#define EMAC_RXMBP_NOCHAIN_MASK		BIT(28)
+#define EMAC_RXMBP_CMFEN_MASK		BIT(24)
+#define EMAC_RXMBP_CSFEN_MASK		BIT(23)
+#define EMAC_RXMBP_CEFEN_MASK		BIT(22)
+#define EMAC_RXMBP_CAFEN_MASK		BIT(21)
+#define EMAC_RXMBP_PROMCH_SHIFT		(16)
+#define EMAC_RXMBP_PROMCH_MASK		(0x7 << 16)
+#define EMAC_RXMBP_BROADEN_MASK		BIT(13)
+#define EMAC_RXMBP_BROADCH_SHIFT	(8)
+#define EMAC_RXMBP_BROADCH_MASK		(0x7 << 8)
+#define EMAC_RXMBP_MULTIEN_MASK		BIT(5)
+#define EMAC_RXMBP_MULTICH_SHIFT	(0)
+#define EMAC_RXMBP_MULTICH_MASK		(0x7)
+#define EMAC_RXMBP_CHMASK		(0x7)
+
+/* EMAC register definitions/bit maps used */
+# define EMAC_MBP_RXPROMISC		(0x00200000)
+# define EMAC_MBP_PROMISCCH(ch)		(((ch) & 0x7) << 16)
+# define EMAC_MBP_RXBCAST		(0x00002000)
+# define EMAC_MBP_BCASTCHAN(ch)		(((ch) & 0x7) << 8)
+# define EMAC_MBP_RXMCAST		(0x00000020)
+# define EMAC_MBP_MCASTCHAN(ch)		((ch) & 0x7)
+
+/* EMAC mac_control register */
+#define EMAC_MACCONTROL_TXPTYPE		(0x200)
+#define EMAC_MACCONTROL_TXPACEEN	(0x40)
+#define EMAC_MACCONTROL_MIIEN		(0x20)
+#define EMAC_MACCONTROL_GIGABITEN	(0x80)
+#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN	(0x1)
+#define EMAC_MACCONTROL_RMIISPEED_MASK	BIT(15)
+
+/* GIGABIT MODE related bits */
+#define EMAC_DM646X_MACCONTORL_GMIIEN	BIT(5)
+#define EMAC_DM646X_MACCONTORL_GIG	BIT(7)
+#define EMAC_DM646X_MACCONTORL_GIGFORCE	BIT(17)
+
+/* EMAC mac_status register */
+#define EMAC_MACSTATUS_TXERRCODE_MASK	(0xF00000)
+#define EMAC_MACSTATUS_TXERRCODE_SHIFT	(20)
+#define EMAC_MACSTATUS_TXERRCH_MASK	(0x7)
+#define EMAC_MACSTATUS_TXERRCH_SHIFT	(16)
+#define EMAC_MACSTATUS_RXERRCODE_MASK	(0xF000)
+#define EMAC_MACSTATUS_RXERRCODE_SHIFT	(12)
+#define EMAC_MACSTATUS_RXERRCH_MASK	(0x7)
+#define EMAC_MACSTATUS_RXERRCH_SHIFT	(8)
+
+/* EMAC RX register masks */
+#define EMAC_RX_MAX_LEN_MASK		(0xFFFF)
+#define EMAC_RX_BUFFER_OFFSET_MASK	(0xFFFF)
+
+/* MAC_IN_VECTOR (0x180) register bit fields */
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	      (0x20000)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	      (0x10000)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	      (0x0100)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	      (0x01)
+
+/** NOTE:: For DM646x the IN_VECTOR has changed */
+#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC	BIT(EMAC_DEF_RX_CH)
+#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC	BIT(16 + EMAC_DEF_TX_CH)
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT		BIT(31)
+#define EMAC_CPPI_EOP_BIT		BIT(30)
+#define EMAC_CPPI_OWNERSHIP_BIT		BIT(29)
+#define EMAC_CPPI_EOQ_BIT		BIT(28)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27)
+#define EMAC_CPPI_PASS_CRC_BIT		BIT(26)
+#define EMAC_RX_BD_BUF_SIZE		(0xFFFF)
+#define EMAC_BD_LENGTH_FOR_CACHE	(16) /* only CPPI bytes */
+#define EMAC_RX_BD_PKT_LENGTH_MASK	(0xFFFF)
+
+/* Max hardware defines */
+#define EMAC_MAX_TXRX_CHANNELS		 (8)  /* Max hardware channels */
+#define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */
+
+/* EMAC Peripheral Device Register Memory Layout structure */
+#define EMAC_TXIDVER		0x0
+#define EMAC_TXCONTROL		0x4
+#define EMAC_TXTEARDOWN		0x8
+#define EMAC_RXIDVER		0x10
+#define EMAC_RXCONTROL		0x14
+#define EMAC_RXTEARDOWN		0x18
+#define EMAC_TXINTSTATRAW	0x80
+#define EMAC_TXINTSTATMASKED	0x84
+#define EMAC_TXINTMASKSET	0x88
+#define EMAC_TXINTMASKCLEAR	0x8C
+#define EMAC_MACINVECTOR	0x90
+
+#define EMAC_DM646X_MACEOIVECTOR	0x94
+
+#define EMAC_RXINTSTATRAW	0xA0
+#define EMAC_RXINTSTATMASKED	0xA4
+#define EMAC_RXINTMASKSET	0xA8
+#define EMAC_RXINTMASKCLEAR	0xAC
+#define EMAC_MACINTSTATRAW	0xB0
+#define EMAC_MACINTSTATMASKED	0xB4
+#define EMAC_MACINTMASKSET	0xB8
+#define EMAC_MACINTMASKCLEAR	0xBC
+
+#define EMAC_RXMBPENABLE	0x100
+#define EMAC_RXUNICASTSET	0x104
+#define EMAC_RXUNICASTCLEAR	0x108
+#define EMAC_RXMAXLEN		0x10C
+#define EMAC_RXBUFFEROFFSET	0x110
+#define EMAC_RXFILTERLOWTHRESH	0x114
+
+#define EMAC_MACCONTROL		0x160
+#define EMAC_MACSTATUS		0x164
+#define EMAC_EMCONTROL		0x168
+#define EMAC_FIFOCONTROL	0x16C
+#define EMAC_MACCONFIG		0x170
+#define EMAC_SOFTRESET		0x174
+#define EMAC_MACSRCADDRLO	0x1D0
+#define EMAC_MACSRCADDRHI	0x1D4
+#define EMAC_MACHASH1		0x1D8
+#define EMAC_MACHASH2		0x1DC
+#define EMAC_MACADDRLO		0x500
+#define EMAC_MACADDRHI		0x504
+#define EMAC_MACINDEX		0x508
+
+/* EMAC HDP and Completion registors */
+#define EMAC_TXHDP(ch)		(0x600 + (ch * 4))
+#define EMAC_RXHDP(ch)		(0x620 + (ch * 4))
+#define EMAC_TXCP(ch)		(0x640 + (ch * 4))
+#define EMAC_RXCP(ch)		(0x660 + (ch * 4))
+
+/* EMAC statistics registers */
+#define EMAC_RXGOODFRAMES	0x200
+#define EMAC_RXBCASTFRAMES	0x204
+#define EMAC_RXMCASTFRAMES	0x208
+#define EMAC_RXPAUSEFRAMES	0x20C
+#define EMAC_RXCRCERRORS	0x210
+#define EMAC_RXALIGNCODEERRORS	0x214
+#define EMAC_RXOVERSIZED	0x218
+#define EMAC_RXJABBER		0x21C
+#define EMAC_RXUNDERSIZED	0x220
+#define EMAC_RXFRAGMENTS	0x224
+#define EMAC_RXFILTERED		0x228
+#define EMAC_RXQOSFILTERED	0x22C
+#define EMAC_RXOCTETS		0x230
+#define EMAC_TXGOODFRAMES	0x234
+#define EMAC_TXBCASTFRAMES	0x238
+#define EMAC_TXMCASTFRAMES	0x23C
+#define EMAC_TXPAUSEFRAMES	0x240
+#define EMAC_TXDEFERRED		0x244
+#define EMAC_TXCOLLISION	0x248
+#define EMAC_TXSINGLECOLL	0x24C
+#define EMAC_TXMULTICOLL	0x250
+#define EMAC_TXEXCESSIVECOLL	0x254
+#define EMAC_TXLATECOLL		0x258
+#define EMAC_TXUNDERRUN		0x25C
+#define EMAC_TXCARRIERSENSE	0x260
+#define EMAC_TXOCTETS		0x264
+#define EMAC_NETOCTETS		0x280
+#define EMAC_RXSOFOVERRUNS	0x284
+#define EMAC_RXMOFOVERRUNS	0x288
+#define EMAC_RXDMAOVERRUNS	0x28C
+
+/* EMAC DM644x control registers */
+#define EMAC_CTRL_EWCTL		(0x4)
+#define EMAC_CTRL_EWINTTCNT	(0x8)
+
+/* EMAC MDIO related */
+/* Mask & Control defines */
+#define MDIO_CONTROL_CLKDIV	(0xFF)
+#define MDIO_CONTROL_ENABLE	BIT(30)
+#define MDIO_USERACCESS_GO	BIT(31)
+#define MDIO_USERACCESS_WRITE	BIT(30)
+#define MDIO_USERACCESS_READ	(0)
+#define MDIO_USERACCESS_REGADR	(0x1F << 21)
+#define MDIO_USERACCESS_PHYADR	(0x1F << 16)
+#define MDIO_USERACCESS_DATA	(0xFFFF)
+#define MDIO_USERPHYSEL_LINKSEL	BIT(7)
+#define MDIO_VER_MODID		(0xFFFF << 16)
+#define MDIO_VER_REVMAJ		(0xFF   << 8)
+#define MDIO_VER_REVMIN		(0xFF)
+
+#define MDIO_USERACCESS(inst)	(0x80 + (inst * 8))
+#define MDIO_USERPHYSEL(inst)	(0x84 + (inst * 8))
+#define MDIO_CONTROL		(0x04)
+
+/* EMAC DM646X control module registers */
+#define EMAC_DM646X_CMRXINTEN	(0x14)
+#define EMAC_DM646X_CMTXINTEN	(0x18)
+
+/* EMAC EOI codes for C0 */
+#define EMAC_DM646X_MAC_EOI_C0_RXEN	(0x01)
+#define EMAC_DM646X_MAC_EOI_C0_TXEN	(0x02)
+
+/** net_buf_obj: EMAC network bufferdata structure
+ *
+ * EMAC network buffer data structure
+ */
+struct emac_netbufobj {
+	void *buf_token;
+	char *data_ptr;
+	int length;
+};
+
+/** net_pkt_obj: EMAC network packet data structure
+ *
+ * EMAC network packet data structure - supports buffer list (for future)
+ */
+struct emac_netpktobj {
+	void *pkt_token; /* data token may hold tx/rx chan id */
+	struct emac_netbufobj *buf_list; /* array of network buffer objects */
+	int num_bufs;
+	int pkt_length;
+};
+
+/** emac_tx_bd: EMAC TX Buffer descriptor data structure
+ *
+ * EMAC TX Buffer descriptor data structure
+ */
+struct emac_tx_bd {
+	int h_next;
+	int buff_ptr;
+	int off_b_len;
+	int mode; /* SOP, EOP, ownership, EOQ, teardown,Qstarv, length */
+	struct emac_tx_bd __iomem *next;
+	void *buf_token;
+};
+
+/** emac_txch: EMAC TX Channel data structure
+ *
+ * EMAC TX Channel data structure
+ */
+struct emac_txch {
+	/* Config related */
+	u32 num_bd;
+	u32 service_max;
+
+	/* CPPI specific */
+	u32 alloc_size;
+	void __iomem *bd_mem;
+	struct emac_tx_bd __iomem *bd_pool_head;
+	struct emac_tx_bd __iomem *active_queue_head;
+	struct emac_tx_bd __iomem *active_queue_tail;
+	struct emac_tx_bd __iomem *last_hw_bdprocessed;
+	u32 queue_active;
+	u32 teardown_pending;
+	u32 *tx_complete;
+
+	/** statistics */
+	u32 proc_count;     /* TX: # of times emac_tx_bdproc is called */
+	u32 mis_queued_packets;
+	u32 queue_reinit;
+	u32 end_of_queue_add;
+	u32 out_of_tx_bd;
+	u32 no_active_pkts; /* IRQ when there were no packets to process */
+	u32 active_queue_count;
+};
+
+/** emac_rx_bd: EMAC RX Buffer descriptor data structure
+ *
+ * EMAC RX Buffer descriptor data structure
+ */
+struct emac_rx_bd {
+	int h_next;
+	int buff_ptr;
+	int off_b_len;
+	int mode;
+	struct emac_rx_bd __iomem *next;
+	void *data_ptr;
+	void *buf_token;
+};
+
+/** emac_rxch: EMAC RX Channel data structure
+ *
+ * EMAC RX Channel data structure
+ */
+struct emac_rxch {
+	/* configuration info */
+	u32 num_bd;
+	u32 service_max;
+	u32 buf_size;
+	char mac_addr[6];
+
+	/** CPPI specific */
+	u32 alloc_size;
+	void __iomem *bd_mem;
+	struct emac_rx_bd __iomem *bd_pool_head;
+	struct emac_rx_bd __iomem *active_queue_head;
+	struct emac_rx_bd __iomem *active_queue_tail;
+	u32 queue_active;
+	u32 teardown_pending;
+
+	/* packet and buffer objects */
+	struct emac_netpktobj pkt_queue;
+	struct emac_netbufobj buf_queue;
+
+	/** statistics */
+	u32 proc_count; /* number of times emac_rx_bdproc is called */
+	u32 processed_bd;
+	u32 recycled_bd;
+	u32 out_of_rx_bd;
+	u32 out_of_rx_buffers;
+	u32 queue_reinit;
+	u32 end_of_queue_add;
+	u32 end_of_queue;
+	u32 mis_queued_packets;
+};
+
+/* emac_priv: EMAC private data structure
+ *
+ * EMAC adapter private data structure
+ */
+struct emac_priv {
+	u32 msg_enable;
+	struct net_device *ndev;
+	struct platform_device *pdev;
+	struct napi_struct napi;
+	char mac_addr[6];
+	spinlock_t tx_lock;
+	spinlock_t rx_lock;
+	void __iomem *remap_addr;
+	u32 emac_base_phys;
+	void __iomem *emac_base;
+	void __iomem *ctrl_base;
+	void __iomem *emac_ctrl_ram;
+	u32 ctrl_ram_size;
+	struct emac_txch *txch[EMAC_DEF_MAX_TX_CH];
+	struct emac_rxch *rxch[EMAC_DEF_MAX_RX_CH];
+	u32 link; /* 1=link on, 0=link off */
+	u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */
+	u32 duplex; /* Link duplex: 0=Half, 1=Full */
+	u32 rx_buf_size;
+	u32 isr_count;
+	u8 rmii_en;
+	u8 version;
+	struct net_device_stats net_dev_stats;
+	u32 mac_hash1;
+	u32 mac_hash2;
+	u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
+	u32 rx_addr_type;
+	/* periodic timer required for MDIO polling */
+	struct timer_list periodic_timer;
+	u32 periodic_ticks;
+	u32 timer_active;
+	u32 phy_mask;
+	/* mii_bus,phy members */
+	struct mii_bus *mii_bus;
+	struct phy_device *phydev;
+	spinlock_t lock;
+};
+
+/* clock frequency for EMAC */
+static struct clk *emac_clk;
+static unsigned long emac_bus_frequency;
+static unsigned long mdio_max_freq;
+
+/* EMAC internal utility function */
+static inline u32 emac_virt_to_phys(void __iomem *addr)
+{
+	return (u32 __force) io_v2p(addr);
+}
+
+/* Cache macros - Packet buffers would be from skb pool which is cached */
+#define EMAC_VIRT_NOCACHE(addr) (addr)
+#define EMAC_CACHE_INVALIDATE(addr, size) \
+	dma_cache_maint((void *)addr, size, DMA_FROM_DEVICE)
+#define EMAC_CACHE_WRITEBACK(addr, size) \
+	dma_cache_maint((void *)addr, size, DMA_TO_DEVICE)
+#define EMAC_CACHE_WRITEBACK_INVALIDATE(addr, size) \
+	dma_cache_maint((void *)addr, size, DMA_BIDIRECTIONAL)
+
+/* DM644x does not have BD's in cached memory - so no cache functions */
+#define BD_CACHE_INVALIDATE(addr, size)
+#define BD_CACHE_WRITEBACK(addr, size)
+#define BD_CACHE_WRITEBACK_INVALIDATE(addr, size)
+
+/* EMAC TX Host Error description strings */
+static char *emac_txhost_errcodes[16] = {
+	"No error", "SOP error", "Ownership bit not set in SOP buffer",
+	"Zero Next Buffer Descriptor Pointer Without EOP",
+	"Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error",
+	"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved"
+};
+
+/* EMAC RX Host Error description strings */
+static char *emac_rxhost_errcodes[16] = {
+	"No error", "Reserved", "Ownership bit not set in input buffer",
+	"Reserved", "Zero Buffer Pointer", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved"
+};
+
+/* Helper macros */
+#define emac_read(reg)		  ioread32(priv->emac_base + (reg))
+#define emac_write(reg, val)      iowrite32(val, priv->emac_base + (reg))
+
+#define emac_ctrl_read(reg)	  ioread32((priv->ctrl_base + (reg)))
+#define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg)))
+
+#define emac_mdio_read(reg)	  ioread32(bus->priv + (reg))
+#define emac_mdio_write(reg, val) iowrite32(val, (bus->priv + (reg)))
+
+/**
+ * emac_dump_regs: Dump important EMAC registers to debug terminal
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Executes ethtool set cmd & sets phy mode
+ *
+ */
+static void emac_dump_regs(struct emac_priv *priv)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+
+	/* Print important registers in EMAC */
+	dev_info(emac_dev, "EMAC Basic registers\n");
+	dev_info(emac_dev, "EMAC: EWCTL: %08X, EWINTTCNT: %08X\n",
+		emac_ctrl_read(EMAC_CTRL_EWCTL),
+		emac_ctrl_read(EMAC_CTRL_EWINTTCNT));
+	dev_info(emac_dev, "EMAC: TXID: %08X %s, RXID: %08X %s\n",
+		emac_read(EMAC_TXIDVER),
+		((emac_read(EMAC_TXCONTROL)) ? "enabled" : "disabled"),
+		emac_read(EMAC_RXIDVER),
+		((emac_read(EMAC_RXCONTROL)) ? "enabled" : "disabled"));
+	dev_info(emac_dev, "EMAC: TXIntRaw:%08X, TxIntMasked: %08X, "\
+		"TxIntMasSet: %08X\n", emac_read(EMAC_TXINTSTATRAW),
+		emac_read(EMAC_TXINTSTATMASKED), emac_read(EMAC_TXINTMASKSET));
+	dev_info(emac_dev, "EMAC: RXIntRaw:%08X, RxIntMasked: %08X, "\
+		"RxIntMasSet: %08X\n", emac_read(EMAC_RXINTSTATRAW),
+		emac_read(EMAC_RXINTSTATMASKED), emac_read(EMAC_RXINTMASKSET));
+	dev_info(emac_dev, "EMAC: MacIntRaw:%08X, MacIntMasked: %08X, "\
+		"MacInVector=%08X\n", emac_read(EMAC_MACINTSTATRAW),
+		emac_read(EMAC_MACINTSTATMASKED), emac_read(EMAC_MACINVECTOR));
+	dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n",
+		emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL));
+	dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\
+		"RXMaxLen=%08X\n", emac_read(EMAC_RXMBPENABLE),
+		emac_read(EMAC_RXUNICASTSET), emac_read(EMAC_RXMAXLEN));
+	dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\
+		"MacConfig=%08X\n", emac_read(EMAC_MACCONTROL),
+		emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG));
+	dev_info(emac_dev, "EMAC: TXHDP[0]:%08X, RXHDP[0]: %08X\n",
+		emac_read(EMAC_TXHDP(0)), emac_read(EMAC_RXHDP(0)));
+	dev_info(emac_dev, "EMAC Statistics\n");
+	dev_info(emac_dev, "EMAC: rx_good_frames:%d\n",
+		emac_read(EMAC_RXGOODFRAMES));
+	dev_info(emac_dev, "EMAC: rx_broadcast_frames:%d\n",
+		emac_read(EMAC_RXBCASTFRAMES));
+	dev_info(emac_dev, "EMAC: rx_multicast_frames:%d\n",
+		emac_read(EMAC_RXMCASTFRAMES));
+	dev_info(emac_dev, "EMAC: rx_pause_frames:%d\n",
+		emac_read(EMAC_RXPAUSEFRAMES));
+	dev_info(emac_dev, "EMAC: rx_crcerrors:%d\n",
+		emac_read(EMAC_RXCRCERRORS));
+	dev_info(emac_dev, "EMAC: rx_align_code_errors:%d\n",
+		emac_read(EMAC_RXALIGNCODEERRORS));
+	dev_info(emac_dev, "EMAC: rx_oversized_frames:%d\n",
+		emac_read(EMAC_RXOVERSIZED));
+	dev_info(emac_dev, "EMAC: rx_jabber_frames:%d\n",
+		emac_read(EMAC_RXJABBER));
+	dev_info(emac_dev, "EMAC: rx_undersized_frames:%d\n",
+		emac_read(EMAC_RXUNDERSIZED));
+	dev_info(emac_dev, "EMAC: rx_fragments:%d\n",
+		emac_read(EMAC_RXFRAGMENTS));
+	dev_info(emac_dev, "EMAC: rx_filtered_frames:%d\n",
+		emac_read(EMAC_RXFILTERED));
+	dev_info(emac_dev, "EMAC: rx_qos_filtered_frames:%d\n",
+		emac_read(EMAC_RXQOSFILTERED));
+	dev_info(emac_dev, "EMAC: rx_octets:%d\n",
+		emac_read(EMAC_RXOCTETS));
+	dev_info(emac_dev, "EMAC: tx_goodframes:%d\n",
+		emac_read(EMAC_TXGOODFRAMES));
+	dev_info(emac_dev, "EMAC: tx_bcastframes:%d\n",
+		emac_read(EMAC_TXBCASTFRAMES));
+	dev_info(emac_dev, "EMAC: tx_mcastframes:%d\n",
+		emac_read(EMAC_TXMCASTFRAMES));
+	dev_info(emac_dev, "EMAC: tx_pause_frames:%d\n",
+		emac_read(EMAC_TXPAUSEFRAMES));
+	dev_info(emac_dev, "EMAC: tx_deferred_frames:%d\n",
+		emac_read(EMAC_TXDEFERRED));
+	dev_info(emac_dev, "EMAC: tx_collision_frames:%d\n",
+		emac_read(EMAC_TXCOLLISION));
+	dev_info(emac_dev, "EMAC: tx_single_coll_frames:%d\n",
+		emac_read(EMAC_TXSINGLECOLL));
+	dev_info(emac_dev, "EMAC: tx_mult_coll_frames:%d\n",
+		emac_read(EMAC_TXMULTICOLL));
+	dev_info(emac_dev, "EMAC: tx_excessive_collisions:%d\n",
+		emac_read(EMAC_TXEXCESSIVECOLL));
+	dev_info(emac_dev, "EMAC: tx_late_collisions:%d\n",
+		emac_read(EMAC_TXLATECOLL));
+	dev_info(emac_dev, "EMAC: tx_underrun:%d\n",
+		emac_read(EMAC_TXUNDERRUN));
+	dev_info(emac_dev, "EMAC: tx_carrier_sense_errors:%d\n",
+		emac_read(EMAC_TXCARRIERSENSE));
+	dev_info(emac_dev, "EMAC: tx_octets:%d\n",
+		emac_read(EMAC_TXOCTETS));
+	dev_info(emac_dev, "EMAC: net_octets:%d\n",
+		emac_read(EMAC_NETOCTETS));
+	dev_info(emac_dev, "EMAC: rx_sof_overruns:%d\n",
+		emac_read(EMAC_RXSOFOVERRUNS));
+	dev_info(emac_dev, "EMAC: rx_mof_overruns:%d\n",
+		emac_read(EMAC_RXMOFOVERRUNS));
+	dev_info(emac_dev, "EMAC: rx_dma_overruns:%d\n",
+		emac_read(EMAC_RXDMAOVERRUNS));
+}
+
+/*************************************************************************
+ *  EMAC MDIO/Phy Functionality
+ *************************************************************************/
+/**
+ * emac_get_drvinfo: Get EMAC driver information
+ * @ndev: The DaVinci EMAC network adapter
+ * @info: ethtool info structure containing name and version
+ *
+ * Returns EMAC driver information (name and version)
+ *
+ */
+static void emac_get_drvinfo(struct net_device *ndev,
+			     struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, emac_version_string);
+	strcpy(info->version, EMAC_MODULE_VERSION);
+}
+
+/**
+ * emac_get_settings: Get EMAC settings
+ * @ndev: The DaVinci EMAC network adapter
+ * @ecmd: ethtool command
+ *
+ * Executes ethool get command
+ *
+ */
+static int emac_get_settings(struct net_device *ndev,
+			     struct ethtool_cmd *ecmd)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	if (priv->phy_mask)
+		return phy_ethtool_gset(priv->phydev, ecmd);
+	else
+		return -EOPNOTSUPP;
+
+}
+
+/**
+ * emac_set_settings: Set EMAC settings
+ * @ndev: The DaVinci EMAC network adapter
+ * @ecmd: ethtool command
+ *
+ * Executes ethool set command
+ *
+ */
+static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	if (priv->phy_mask)
+		return phy_ethtool_sset(priv->phydev, ecmd);
+	else
+		return -EOPNOTSUPP;
+
+}
+
+/**
+ * ethtool_ops: DaVinci EMAC Ethtool structure
+ *
+ * Ethtool support for EMAC adapter
+ *
+ */
+static const struct ethtool_ops ethtool_ops = {
+	.get_drvinfo = emac_get_drvinfo,
+	.get_settings = emac_get_settings,
+	.set_settings = emac_set_settings,
+	.get_link = ethtool_op_get_link,
+};
+
+/**
+ * emac_update_phystatus: Update Phy status
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Updates phy status and takes action for network queue if required
+ * based upon link status
+ *
+ */
+static void emac_update_phystatus(struct emac_priv *priv)
+{
+	u32 mac_control;
+	u32 new_duplex;
+	u32 cur_duplex;
+	struct net_device *ndev = priv->ndev;
+
+	mac_control = emac_read(EMAC_MACCONTROL);
+	cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ?
+			DUPLEX_FULL : DUPLEX_HALF;
+	if (priv->phy_mask)
+		new_duplex = priv->phydev->duplex;
+	else
+		new_duplex = DUPLEX_FULL;
+
+	/* We get called only if link has changed (speed/duplex/status) */
+	if ((priv->link) && (new_duplex != cur_duplex)) {
+		priv->duplex = new_duplex;
+		if (DUPLEX_FULL == priv->duplex)
+			mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN);
+		else
+			mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN);
+	}
+
+	if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
+		mac_control = emac_read(EMAC_MACCONTROL);
+		mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN |
+				EMAC_DM646X_MACCONTORL_GIG |
+				EMAC_DM646X_MACCONTORL_GIGFORCE);
+	} else {
+		/* Clear the GIG bit and GIGFORCE bit */
+		mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE |
+					EMAC_DM646X_MACCONTORL_GIG);
+
+		if (priv->rmii_en && (priv->speed == SPEED_100))
+			mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK;
+		else
+			mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK;
+	}
+
+	/* Update mac_control if changed */
+	emac_write(EMAC_MACCONTROL, mac_control);
+
+	if (priv->link) {
+		/* link ON */
+		if (!netif_carrier_ok(ndev))
+			netif_carrier_on(ndev);
+	/* reactivate the transmit queue if it is stopped */
+		if (netif_running(ndev) && netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
+	} else {
+		/* link OFF */
+		if (netif_carrier_ok(ndev))
+			netif_carrier_off(ndev);
+		if (!netif_queue_stopped(ndev))
+			netif_stop_queue(ndev);
+	}
+}
+
+/**
+ * hash_get: Calculate hash value from mac address
+ * @addr: mac address to delete from hash table
+ *
+ * Calculates hash value from mac address
+ *
+ */
+static u32 hash_get(u8 *addr)
+{
+	u32 hash;
+	u8 tmpval;
+	int cnt;
+	hash = 0;
+
+	for (cnt = 0; cnt < 2; cnt++) {
+		tmpval = *addr++;
+		hash ^= (tmpval >> 2) ^ (tmpval << 4);
+		tmpval = *addr++;
+		hash ^= (tmpval >> 4) ^ (tmpval << 2);
+		tmpval = *addr++;
+		hash ^= (tmpval >> 6) ^ (tmpval);
+	}
+
+	return hash & 0x3F;
+}
+
+/**
+ * hash_add: Hash function to add mac addr from hash table
+ * @priv: The DaVinci EMAC private adapter structure
+ * mac_addr: mac address to delete from hash table
+ *
+ * Adds mac address to the internal hash table
+ *
+ */
+static int hash_add(struct emac_priv *priv, u8 *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 rc = 0;
+	u32 hash_bit;
+	u32 hash_value = hash_get(mac_addr);
+
+	if (hash_value >= EMAC_NUM_MULTICAST_BITS) {
+		if (netif_msg_drv(priv)) {
+			dev_err(emac_dev, "DaVinci EMAC: hash_add(): Invalid "\
+				"Hash %08x, should not be greater than %08x",
+				hash_value, (EMAC_NUM_MULTICAST_BITS - 1));
+		}
+		return -1;
+	}
+
+	/* set the hash bit only if not previously set */
+	if (priv->multicast_hash_cnt[hash_value] == 0) {
+		rc = 1; /* hash value changed */
+		if (hash_value < 32) {
+			hash_bit = BIT(hash_value);
+			priv->mac_hash1 |= hash_bit;
+		} else {
+			hash_bit = BIT((hash_value - 32));
+			priv->mac_hash2 |= hash_bit;
+		}
+	}
+
+	/* incr counter for num of mcast addr's mapped to "this" hash bit */
+	++priv->multicast_hash_cnt[hash_value];
+
+	return rc;
+}
+
+/**
+ * hash_del: Hash function to delete mac addr from hash table
+ * @priv: The DaVinci EMAC private adapter structure
+ * mac_addr: mac address to delete from hash table
+ *
+ * Removes mac address from the internal hash table
+ *
+ */
+static int hash_del(struct emac_priv *priv, u8 *mac_addr)
+{
+	u32 hash_value;
+	u32 hash_bit;
+
+	hash_value = hash_get(mac_addr);
+	if (priv->multicast_hash_cnt[hash_value] > 0) {
+		/* dec cntr for num of mcast addr's mapped to this hash bit */
+		--priv->multicast_hash_cnt[hash_value];
+	}
+
+	/* if counter still > 0, at least one multicast address refers
+	 * to this hash bit. so return 0 */
+	if (priv->multicast_hash_cnt[hash_value] > 0)
+		return 0;
+
+	if (hash_value < 32) {
+		hash_bit = BIT(hash_value);
+		priv->mac_hash1 &= ~hash_bit;
+	} else {
+		hash_bit = BIT((hash_value - 32));
+		priv->mac_hash2 &= ~hash_bit;
+	}
+
+	/* return 1 to indicate change in mac_hash registers reqd */
+	return 1;
+}
+
+/* EMAC multicast operation */
+#define EMAC_MULTICAST_ADD	0
+#define EMAC_MULTICAST_DEL	1
+#define EMAC_ALL_MULTI_SET	2
+#define EMAC_ALL_MULTI_CLR	3
+
+/**
+ * emac_add_mcast: Set multicast address in the EMAC adapter (Internal)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @action: multicast operation to perform
+ * mac_addr: mac address to set
+ *
+ * Set multicast addresses in EMAC adapter - internal function
+ *
+ */
+static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	int update = -1;
+
+	switch (action) {
+	case EMAC_MULTICAST_ADD:
+		update = hash_add(priv, mac_addr);
+		break;
+	case EMAC_MULTICAST_DEL:
+		update = hash_del(priv, mac_addr);
+		break;
+	case EMAC_ALL_MULTI_SET:
+		update = 1;
+		priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE;
+		priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE;
+		break;
+	case EMAC_ALL_MULTI_CLR:
+		update = 1;
+		priv->mac_hash1 = 0;
+		priv->mac_hash2 = 0;
+		memset(&(priv->multicast_hash_cnt[0]), 0,
+		sizeof(priv->multicast_hash_cnt[0]) *
+		       EMAC_NUM_MULTICAST_BITS);
+		break;
+	default:
+		if (netif_msg_drv(priv))
+			dev_err(emac_dev, "DaVinci EMAC: add_mcast"\
+				": bad operation %d", action);
+		break;
+	}
+
+	/* write to the hardware only if the register status chances */
+	if (update > 0) {
+		emac_write(EMAC_MACHASH1, priv->mac_hash1);
+		emac_write(EMAC_MACHASH2, priv->mac_hash2);
+	}
+}
+
+/**
+ * emac_dev_mcast_set: Set multicast address in the EMAC adapter
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Set multicast addresses in EMAC adapter
+ *
+ */
+static void emac_dev_mcast_set(struct net_device *ndev)
+{
+	u32 mbp_enable;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	mbp_enable = emac_read(EMAC_RXMBPENABLE);
+	if (ndev->flags & IFF_PROMISC) {
+		mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH));
+		mbp_enable |= (EMAC_MBP_RXPROMISC);
+	} else {
+		mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC);
+		if ((ndev->flags & IFF_ALLMULTI) ||
+		    (ndev->mc_count > EMAC_DEF_MAX_MULTICAST_ADDRESSES)) {
+			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL);
+		}
+		if (ndev->mc_count > 0) {
+			struct dev_mc_list *mc_ptr;
+			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
+			/* program multicast address list into EMAC hardware */
+			for (mc_ptr = ndev->mc_list; mc_ptr;
+			     mc_ptr = mc_ptr->next) {
+				emac_add_mcast(priv, EMAC_MULTICAST_ADD,
+					       (u8 *)mc_ptr->dmi_addr);
+			}
+		} else {
+			mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
+		}
+	}
+	/* Set mbp config register */
+	emac_write(EMAC_RXMBPENABLE, mbp_enable);
+}
+
+/*************************************************************************
+ *  EMAC Hardware manipulation
+ *************************************************************************/
+
+/**
+ * emac_int_disable: Disable EMAC module interrupt (from adapter)
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Disable EMAC interrupt on the adapter
+ *
+ */
+static void emac_int_disable(struct emac_priv *priv)
+{
+	if (priv->version == EMAC_VERSION_2) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+
+		/* Program C0_Int_En to zero to turn off
+		* interrupts to the CPU */
+		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
+		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
+		/* NOTE: Rx Threshold and Misc interrupts are not disabled */
+
+		local_irq_restore(flags);
+
+	} else {
+		/* Set DM644x control registers for interrupt control */
+		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0);
+	}
+}
+
+/**
+ * emac_int_enable: Enable EMAC module interrupt (from adapter)
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Enable EMAC interrupt on the adapter
+ *
+ */
+static void emac_int_enable(struct emac_priv *priv)
+{
+	if (priv->version == EMAC_VERSION_2) {
+		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
+		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
+
+		/* In addition to turning on interrupt Enable, we need
+		 * ack by writing appropriate values to the EOI
+		 * register */
+
+		/* NOTE: Rx Threshold and Misc interrupts are not enabled */
+
+		/* ack rxen only then a new pulse will be generated */
+		emac_write(EMAC_DM646X_MACEOIVECTOR,
+			EMAC_DM646X_MAC_EOI_C0_RXEN);
+
+		/* ack txen- only then a new pulse will be generated */
+		emac_write(EMAC_DM646X_MACEOIVECTOR,
+			EMAC_DM646X_MAC_EOI_C0_TXEN);
+
+	} else {
+		/* Set DM644x control registers for interrupt control */
+		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1);
+	}
+}
+
+/**
+ * emac_irq: EMAC interrupt handler
+ * @irq: interrupt number
+ * @dev_id: EMAC network adapter data structure ptr
+ *
+ * EMAC Interrupt handler - we only schedule NAPI and not process any packets
+ * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function
+ *
+ * Returns interrupt handled condition
+ */
+static irqreturn_t emac_irq(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	++priv->isr_count;
+	if (likely(netif_running(priv->ndev))) {
+		emac_int_disable(priv);
+		napi_schedule(&priv->napi);
+	} else {
+		/* we are closing down, so dont process anything */
+	}
+	return IRQ_HANDLED;
+}
+
+/** EMAC on-chip buffer descriptor memory
+ *
+ * WARNING: Please note that the on chip memory is used for both TX and RX
+ * buffer descriptor queues and is equally divided between TX and RX desc's
+ * If the number of TX or RX descriptors change this memory pointers need
+ * to be adjusted. If external memory is allocated then these pointers can
+ * pointer to the memory
+ *
+ */
+#define EMAC_TX_BD_MEM(priv)	((priv)->emac_ctrl_ram)
+#define EMAC_RX_BD_MEM(priv)	((priv)->emac_ctrl_ram + \
+				(((priv)->ctrl_ram_size) >> 1))
+
+/**
+ * emac_init_txch: TX channel initialization
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ *
+ * Called during device init to setup a TX channel (allocate buffer desc
+ * create free pool and keep ready for transmission
+ *
+ * Returns success(0) or mem alloc failures error code
+ */
+static int emac_init_txch(struct emac_priv *priv, u32 ch)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 cnt, bd_size;
+	void __iomem *mem;
+	struct emac_tx_bd __iomem *curr_bd;
+	struct emac_txch *txch = NULL;
+
+	txch = kzalloc(sizeof(struct emac_txch), GFP_KERNEL);
+	if (NULL == txch) {
+		dev_err(emac_dev, "DaVinci EMAC: TX Ch mem alloc failed");
+		return -ENOMEM;
+	}
+	priv->txch[ch] = txch;
+	txch->service_max = EMAC_DEF_TX_MAX_SERVICE;
+	txch->active_queue_head = NULL;
+	txch->active_queue_tail = NULL;
+	txch->queue_active = 0;
+	txch->teardown_pending = 0;
+
+	/* allocate memory for TX CPPI channel on a 4 byte boundry */
+	txch->tx_complete = kzalloc(txch->service_max * sizeof(u32),
+				    GFP_KERNEL);
+	if (NULL == txch->tx_complete) {
+		dev_err(emac_dev, "DaVinci EMAC: Tx service mem alloc failed");
+		kfree(txch);
+		return -ENOMEM;
+	}
+
+	/* allocate buffer descriptor pool align every BD on four word
+	 * boundry for future requirements */
+	bd_size = (sizeof(struct emac_tx_bd) + 0xF) & ~0xF;
+	txch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size;
+	txch->alloc_size = (((bd_size * txch->num_bd) + 0xF) & ~0xF);
+
+	/* alloc TX BD memory */
+	txch->bd_mem = EMAC_TX_BD_MEM(priv);
+	__memzero((void __force *)txch->bd_mem, txch->alloc_size);
+
+	/* initialize the BD linked list */
+	mem = (void __force __iomem *)
+			(((u32 __force) txch->bd_mem + 0xF) & ~0xF);
+	txch->bd_pool_head = NULL;
+	for (cnt = 0; cnt < txch->num_bd; cnt++) {
+		curr_bd = mem + (cnt * bd_size);
+		curr_bd->next = txch->bd_pool_head;
+		txch->bd_pool_head = curr_bd;
+	}
+
+	/* reset statistics counters */
+	txch->out_of_tx_bd = 0;
+	txch->no_active_pkts = 0;
+	txch->active_queue_count = 0;
+
+	return 0;
+}
+
+/**
+ * emac_cleanup_txch: Book-keep function to clean TX channel resources
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: TX channel number
+ *
+ * Called to clean up TX channel resources
+ *
+ */
+static void emac_cleanup_txch(struct emac_priv *priv, u32 ch)
+{
+	struct emac_txch *txch = priv->txch[ch];
+
+	if (txch) {
+		if (txch->bd_mem)
+			txch->bd_mem = NULL;
+		kfree(txch->tx_complete);
+		kfree(txch);
+		priv->txch[ch] = NULL;
+	}
+}
+
+/**
+ * emac_net_tx_complete: TX packet completion function
+ * @priv: The DaVinci EMAC private adapter structure
+ * @net_data_tokens: packet token - skb pointer
+ * @num_tokens: number of skb's to free
+ * @ch: TX channel number
+ *
+ * Frees the skb once packet is transmitted
+ *
+ */
+static int emac_net_tx_complete(struct emac_priv *priv,
+				void **net_data_tokens,
+				int num_tokens, u32 ch)
+{
+	u32 cnt;
+
+	if (unlikely(num_tokens && netif_queue_stopped(priv->ndev)))
+		netif_start_queue(priv->ndev);
+	for (cnt = 0; cnt < num_tokens; cnt++) {
+		struct sk_buff *skb = (struct sk_buff *)net_data_tokens[cnt];
+		if (skb == NULL)
+			continue;
+		priv->net_dev_stats.tx_packets++;
+		priv->net_dev_stats.tx_bytes += skb->len;
+		dev_kfree_skb_any(skb);
+	}
+	return 0;
+}
+
+/**
+ * emac_txch_teardown: TX channel teardown
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: TX channel number
+ *
+ * Called to teardown TX channel
+ *
+ */
+static void emac_txch_teardown(struct emac_priv *priv, u32 ch)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */
+	struct emac_txch *txch = priv->txch[ch];
+	struct emac_tx_bd __iomem *curr_bd;
+
+	while ((emac_read(EMAC_TXCP(ch)) & EMAC_TEARDOWN_VALUE) !=
+	       EMAC_TEARDOWN_VALUE) {
+		/* wait till tx teardown complete */
+		cpu_relax(); /* TODO: check if this helps ... */
+		--teardown_cnt;
+		if (0 == teardown_cnt) {
+			dev_err(emac_dev, "EMAC: TX teardown aborted\n");
+			break;
+		}
+	}
+	emac_write(EMAC_TXCP(ch), EMAC_TEARDOWN_VALUE);
+
+	/* process sent packets and return skb's to upper layer */
+	if (1 == txch->queue_active) {
+		curr_bd = txch->active_queue_head;
+		while (curr_bd != NULL) {
+			emac_net_tx_complete(priv, (void __force *)
+					&curr_bd->buf_token, 1, ch);
+			if (curr_bd != txch->active_queue_tail)
+				curr_bd = curr_bd->next;
+			else
+				break;
+		}
+		txch->bd_pool_head = txch->active_queue_head;
+		txch->active_queue_head =
+		txch->active_queue_tail = NULL;
+	}
+}
+
+/**
+ * emac_stop_txch: Stop TX channel operation
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: TX channel number
+ *
+ * Called to stop TX channel operation
+ *
+ */
+static void emac_stop_txch(struct emac_priv *priv, u32 ch)
+{
+	struct emac_txch *txch = priv->txch[ch];
+
+	if (txch) {
+		txch->teardown_pending = 1;
+		emac_write(EMAC_TXTEARDOWN, 0);
+		emac_txch_teardown(priv, ch);
+		txch->teardown_pending = 0;
+		emac_write(EMAC_TXINTMASKCLEAR, BIT(ch));
+	}
+}
+
+/**
+ * emac_tx_bdproc: TX buffer descriptor (packet) processing
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: TX channel number to process buffer descriptors for
+ * @budget: number of packets allowed to process
+ * @pending: indication to caller that packets are pending to process
+ *
+ * Processes TX buffer descriptors after packets are transmitted - checks
+ * ownership bit on the TX * descriptor and requeues it to free pool & frees
+ * the SKB buffer. Only "budget" number of packets are processed and
+ * indication of pending packets provided to the caller
+ *
+ * Returns number of packets processed
+ */
+static int emac_tx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	unsigned long flags;
+	u32 frame_status;
+	u32 pkts_processed = 0;
+	u32 tx_complete_cnt = 0;
+	struct emac_tx_bd __iomem *curr_bd;
+	struct emac_txch *txch = priv->txch[ch];
+	u32 *tx_complete_ptr = txch->tx_complete;
+
+	if (unlikely(1 == txch->teardown_pending)) {
+		if (netif_msg_tx_err(priv) && net_ratelimit()) {
+			dev_err(emac_dev, "DaVinci EMAC:emac_tx_bdproc: "\
+				"teardown pending\n");
+		}
+		return 0;  /* dont handle any pkt completions */
+	}
+
+	++txch->proc_count;
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	curr_bd = txch->active_queue_head;
+	if (NULL == curr_bd) {
+		emac_write(EMAC_TXCP(ch),
+			   emac_virt_to_phys(txch->last_hw_bdprocessed));
+		txch->no_active_pkts++;
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		return 0;
+	}
+	BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+	frame_status = curr_bd->mode;
+	while ((curr_bd) &&
+	      ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) &&
+	      (pkts_processed < budget)) {
+		emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd));
+		txch->active_queue_head = curr_bd->next;
+		if (frame_status & EMAC_CPPI_EOQ_BIT) {
+			if (curr_bd->next) {	/* misqueued packet */
+				emac_write(EMAC_TXHDP(ch), curr_bd->h_next);
+				++txch->mis_queued_packets;
+			} else {
+				txch->queue_active = 0; /* end of queue */
+			}
+		}
+		*tx_complete_ptr = (u32) curr_bd->buf_token;
+		++tx_complete_ptr;
+		++tx_complete_cnt;
+		curr_bd->next = txch->bd_pool_head;
+		txch->bd_pool_head = curr_bd;
+		--txch->active_queue_count;
+		pkts_processed++;
+		txch->last_hw_bdprocessed = curr_bd;
+		curr_bd = txch->active_queue_head;
+		if (curr_bd) {
+			BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+			frame_status = curr_bd->mode;
+		}
+	} /* end of pkt processing loop */
+
+	emac_net_tx_complete(priv,
+			     (void *)&txch->tx_complete[0],
+			     tx_complete_cnt, ch);
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	return pkts_processed;
+}
+
+#define EMAC_ERR_TX_OUT_OF_BD -1
+
+/**
+ * emac_send: EMAC Transmit function (internal)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @pkt: packet pointer (contains skb ptr)
+ * @ch: TX channel number
+ *
+ * Called by the transmit function to queue the packet in EMAC hardware queue
+ *
+ * Returns success(0) or error code (typically out of desc's)
+ */
+static int emac_send(struct emac_priv *priv, struct emac_netpktobj *pkt, u32 ch)
+{
+	unsigned long flags;
+	struct emac_tx_bd __iomem *curr_bd;
+	struct emac_txch *txch;
+	struct emac_netbufobj *buf_list;
+
+	txch = priv->txch[ch];
+	buf_list = pkt->buf_list;   /* get handle to the buffer array */
+
+	/* check packet size and pad if short */
+	if (pkt->pkt_length < EMAC_DEF_MIN_ETHPKTSIZE) {
+		buf_list->length += (EMAC_DEF_MIN_ETHPKTSIZE - pkt->pkt_length);
+		pkt->pkt_length = EMAC_DEF_MIN_ETHPKTSIZE;
+	}
+
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	curr_bd = txch->bd_pool_head;
+	if (curr_bd == NULL) {
+		txch->out_of_tx_bd++;
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		return EMAC_ERR_TX_OUT_OF_BD;
+	}
+
+	txch->bd_pool_head = curr_bd->next;
+	curr_bd->buf_token = buf_list->buf_token;
+	/* FIXME buff_ptr = dma_map_single(... data_ptr ...) */
+	curr_bd->buff_ptr = virt_to_phys(buf_list->data_ptr);
+	curr_bd->off_b_len = buf_list->length;
+	curr_bd->h_next = 0;
+	curr_bd->next = NULL;
+	curr_bd->mode = (EMAC_CPPI_SOP_BIT | EMAC_CPPI_OWNERSHIP_BIT |
+			 EMAC_CPPI_EOP_BIT | pkt->pkt_length);
+
+	/* flush the packet from cache if write back cache is present */
+	BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+
+	/* send the packet */
+	if (txch->active_queue_head == NULL) {
+		txch->active_queue_head = curr_bd;
+		txch->active_queue_tail = curr_bd;
+		if (1 != txch->queue_active) {
+			emac_write(EMAC_TXHDP(ch),
+					emac_virt_to_phys(curr_bd));
+			txch->queue_active = 1;
+		}
+		++txch->queue_reinit;
+	} else {
+		register struct emac_tx_bd __iomem *tail_bd;
+		register u32 frame_status;
+
+		tail_bd = txch->active_queue_tail;
+		tail_bd->next = curr_bd;
+		txch->active_queue_tail = curr_bd;
+		tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
+		tail_bd->h_next = (int)emac_virt_to_phys(curr_bd);
+		frame_status = tail_bd->mode;
+		if (frame_status & EMAC_CPPI_EOQ_BIT) {
+			emac_write(EMAC_TXHDP(ch), emac_virt_to_phys(curr_bd));
+			frame_status &= ~(EMAC_CPPI_EOQ_BIT);
+			tail_bd->mode = frame_status;
+			++txch->end_of_queue_add;
+		}
+	}
+	txch->active_queue_count++;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	return 0;
+}
+
+/**
+ * emac_dev_xmit: EMAC Transmit function
+ * @skb: SKB pointer
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called by the system to transmit a packet  - we queue the packet in
+ * EMAC hardware transmit queue
+ *
+ * Returns success(NETDEV_TX_OK) or error code (typically out of desc's)
+ */
+static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct device *emac_dev = &ndev->dev;
+	int ret_code;
+	struct emac_netbufobj tx_buf; /* buffer obj-only single frame support */
+	struct emac_netpktobj tx_packet;  /* packet object */
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	/* If no link, return */
+	if (unlikely(!priv->link)) {
+		if (netif_msg_tx_err(priv) && net_ratelimit())
+			dev_err(emac_dev, "DaVinci EMAC: No link to transmit");
+		return NETDEV_TX_BUSY;
+	}
+
+	/* Build the buffer and packet objects - Since only single fragment is
+	 * supported, need not set length and token in both packet & object.
+	 * Doing so for completeness sake & to show that this needs to be done
+	 * in multifragment case
+	 */
+	tx_packet.buf_list = &tx_buf;
+	tx_packet.num_bufs = 1; /* only single fragment supported */
+	tx_packet.pkt_length = skb->len;
+	tx_packet.pkt_token = (void *)skb;
+	tx_buf.length = skb->len;
+	tx_buf.buf_token = (void *)skb;
+	tx_buf.data_ptr = skb->data;
+	EMAC_CACHE_WRITEBACK((unsigned long)skb->data, skb->len);
+	ndev->trans_start = jiffies;
+	ret_code = emac_send(priv, &tx_packet, EMAC_DEF_TX_CH);
+	if (unlikely(ret_code != 0)) {
+		if (ret_code == EMAC_ERR_TX_OUT_OF_BD) {
+			if (netif_msg_tx_err(priv) && net_ratelimit())
+				dev_err(emac_dev, "DaVinci EMAC: xmit() fatal"\
+					" err. Out of TX BD's");
+			netif_stop_queue(priv->ndev);
+		}
+		priv->net_dev_stats.tx_dropped++;
+		return NETDEV_TX_BUSY;
+	}
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ * emac_dev_tx_timeout: EMAC Transmit timeout function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system detects that a skb timeout period has expired
+ * potentially due to a fault in the adapter in not being able to send
+ * it out on the wire. We teardown the TX channel assuming a hardware
+ * error and re-initialize the TX channel for hardware operation
+ *
+ */
+static void emac_dev_tx_timeout(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct device *emac_dev = &ndev->dev;
+
+	if (netif_msg_tx_err(priv))
+		dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX");
+
+	priv->net_dev_stats.tx_errors++;
+	emac_int_disable(priv);
+	emac_stop_txch(priv, EMAC_DEF_TX_CH);
+	emac_cleanup_txch(priv, EMAC_DEF_TX_CH);
+	emac_init_txch(priv, EMAC_DEF_TX_CH);
+	emac_write(EMAC_TXHDP(0), 0);
+	emac_write(EMAC_TXINTMASKSET, BIT(EMAC_DEF_TX_CH));
+	emac_int_enable(priv);
+}
+
+/**
+ * emac_net_alloc_rx_buf: Allocate a skb for RX
+ * @priv: The DaVinci EMAC private adapter structure
+ * @buf_size: size of SKB data buffer to allocate
+ * @data_token: data token returned (skb handle for storing in buffer desc)
+ * @ch: RX channel number
+ *
+ * Called during RX channel setup - allocates skb buffer of required size
+ * and provides the skb handle and allocated buffer data pointer to caller
+ *
+ * Returns skb data pointer or 0 on failure to alloc skb
+ */
+static void *emac_net_alloc_rx_buf(struct emac_priv *priv, int buf_size,
+		void **data_token, u32 ch)
+{
+	struct net_device *ndev = priv->ndev;
+	struct device *emac_dev = &ndev->dev;
+	struct sk_buff *p_skb;
+
+	p_skb = dev_alloc_skb(buf_size);
+	if (unlikely(NULL == p_skb)) {
+		if (netif_msg_rx_err(priv) && net_ratelimit())
+			dev_err(emac_dev, "DaVinci EMAC: failed to alloc skb");
+		return NULL;
+	}
+
+	/* set device pointer in skb and reserve space for extra bytes */
+	p_skb->dev = ndev;
+	skb_reserve(p_skb, NET_IP_ALIGN);
+	*data_token = (void *) p_skb;
+	EMAC_CACHE_WRITEBACK_INVALIDATE((unsigned long)p_skb->data, buf_size);
+	return p_skb->data;
+}
+
+/**
+ * emac_init_rxch: RX channel initialization
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @param: mac address for RX channel
+ *
+ * Called during device init to setup a RX channel (allocate buffers and
+ * buffer descriptors, create queue and keep ready for reception
+ *
+ * Returns success(0) or mem alloc failures error code
+ */
+static int emac_init_rxch(struct emac_priv *priv, u32 ch, char *param)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 cnt, bd_size;
+	void __iomem *mem;
+	struct emac_rx_bd __iomem *curr_bd;
+	struct emac_rxch *rxch = NULL;
+
+	rxch = kzalloc(sizeof(struct emac_rxch), GFP_KERNEL);
+	if (NULL == rxch) {
+		dev_err(emac_dev, "DaVinci EMAC: RX Ch mem alloc failed");
+		return -ENOMEM;
+	}
+	priv->rxch[ch] = rxch;
+	rxch->buf_size = priv->rx_buf_size;
+	rxch->service_max = EMAC_DEF_RX_MAX_SERVICE;
+	rxch->queue_active = 0;
+	rxch->teardown_pending = 0;
+
+	/* save mac address */
+	for (cnt = 0; cnt < 6; cnt++)
+		rxch->mac_addr[cnt] = param[cnt];
+
+	/* allocate buffer descriptor pool align every BD on four word
+	 * boundry for future requirements */
+	bd_size = (sizeof(struct emac_rx_bd) + 0xF) & ~0xF;
+	rxch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size;
+	rxch->alloc_size = (((bd_size * rxch->num_bd) + 0xF) & ~0xF);
+	rxch->bd_mem = EMAC_RX_BD_MEM(priv);
+	__memzero((void __force *)rxch->bd_mem, rxch->alloc_size);
+	rxch->pkt_queue.buf_list = &rxch->buf_queue;
+
+	/* allocate RX buffer and initialize the BD linked list */
+	mem = (void __force __iomem *)
+			(((u32 __force) rxch->bd_mem + 0xF) & ~0xF);
+	rxch->active_queue_head = NULL;
+	rxch->active_queue_tail = mem;
+	for (cnt = 0; cnt < rxch->num_bd; cnt++) {
+		curr_bd = mem + (cnt * bd_size);
+		/* for future use the last parameter contains the BD ptr */
+		curr_bd->data_ptr = emac_net_alloc_rx_buf(priv,
+				    rxch->buf_size,
+				    (void __force **)&curr_bd->buf_token,
+				    EMAC_DEF_RX_CH);
+		if (curr_bd->data_ptr == NULL) {
+			dev_err(emac_dev, "DaVinci EMAC: RX buf mem alloc " \
+				"failed for ch %d\n", ch);
+			kfree(rxch);
+			return -ENOMEM;
+		}
+
+		/* populate the hardware descriptor */
+		curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head);
+		/* FIXME buff_ptr = dma_map_single(... data_ptr ...) */
+		curr_bd->buff_ptr = virt_to_phys(curr_bd->data_ptr);
+		curr_bd->off_b_len = rxch->buf_size;
+		curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT;
+
+		/* write back to hardware memory */
+		BD_CACHE_WRITEBACK_INVALIDATE((u32) curr_bd,
+					      EMAC_BD_LENGTH_FOR_CACHE);
+		curr_bd->next = rxch->active_queue_head;
+		rxch->active_queue_head = curr_bd;
+	}
+
+	/* At this point rxCppi->activeQueueHead points to the first
+	   RX BD ready to be given to RX HDP and rxch->active_queue_tail
+	   points to the last RX BD
+	 */
+	return 0;
+}
+
+/**
+ * emac_rxch_teardown: RX channel teardown
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ *
+ * Called during device stop to teardown RX channel
+ *
+ */
+static void emac_rxch_teardown(struct emac_priv *priv, u32 ch)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */
+
+	while ((emac_read(EMAC_RXCP(ch)) & EMAC_TEARDOWN_VALUE) !=
+	       EMAC_TEARDOWN_VALUE) {
+		/* wait till tx teardown complete */
+		cpu_relax(); /* TODO: check if this helps ... */
+		--teardown_cnt;
+		if (0 == teardown_cnt) {
+			dev_err(emac_dev, "EMAC: RX teardown aborted\n");
+			break;
+		}
+	}
+	emac_write(EMAC_RXCP(ch), EMAC_TEARDOWN_VALUE);
+}
+
+/**
+ * emac_stop_rxch: Stop RX channel operation
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ *
+ * Called during device stop to stop RX channel operation
+ *
+ */
+static void emac_stop_rxch(struct emac_priv *priv, u32 ch)
+{
+	struct emac_rxch *rxch = priv->rxch[ch];
+
+	if (rxch) {
+		rxch->teardown_pending = 1;
+		emac_write(EMAC_RXTEARDOWN, ch);
+		/* wait for teardown complete */
+		emac_rxch_teardown(priv, ch);
+		rxch->teardown_pending = 0;
+		emac_write(EMAC_RXINTMASKCLEAR, BIT(ch));
+	}
+}
+
+/**
+ * emac_cleanup_rxch: Book-keep function to clean RX channel resources
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ *
+ * Called during device stop to clean up RX channel resources
+ *
+ */
+static void emac_cleanup_rxch(struct emac_priv *priv, u32 ch)
+{
+	struct emac_rxch *rxch = priv->rxch[ch];
+	struct emac_rx_bd __iomem *curr_bd;
+
+	if (rxch) {
+		/* free the receive buffers previously allocated */
+		curr_bd = rxch->active_queue_head;
+		while (curr_bd) {
+			if (curr_bd->buf_token) {
+				dev_kfree_skb_any((struct sk_buff *)\
+						  curr_bd->buf_token);
+			}
+			curr_bd = curr_bd->next;
+		}
+		if (rxch->bd_mem)
+			rxch->bd_mem = NULL;
+		kfree(rxch);
+		priv->rxch[ch] = NULL;
+	}
+}
+
+/**
+ * emac_set_type0addr: Set EMAC Type0 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set Type0 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	u32 val;
+	val = ((mac_addr[5] << 8) | (mac_addr[4]));
+	emac_write(EMAC_MACSRCADDRLO, val);
+
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACSRCADDRHI, val);
+	val = emac_read(EMAC_RXUNICASTSET);
+	val |= BIT(ch);
+	emac_write(EMAC_RXUNICASTSET, val);
+	val = emac_read(EMAC_RXUNICASTCLEAR);
+	val &= ~BIT(ch);
+	emac_write(EMAC_RXUNICASTCLEAR, val);
+}
+
+/**
+ * emac_set_type1addr: Set EMAC Type1 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set Type1 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	u32 val;
+	emac_write(EMAC_MACINDEX, ch);
+	val = ((mac_addr[5] << 8) | mac_addr[4]);
+	emac_write(EMAC_MACADDRLO, val);
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACADDRHI, val);
+	emac_set_type0addr(priv, ch, mac_addr);
+}
+
+/**
+ * emac_set_type2addr: Set EMAC Type2 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ * @index: index into RX address entries
+ * @match: match parameter for RX address matching logic
+ *
+ * Called internally to set Type2 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type2addr(struct emac_priv *priv, u32 ch,
+			       char *mac_addr, int index, int match)
+{
+	u32 val;
+	emac_write(EMAC_MACINDEX, index);
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACADDRHI, val);
+	val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \
+	       (match << 19) | BIT(20));
+	emac_write(EMAC_MACADDRLO, val);
+	emac_set_type0addr(priv, ch, mac_addr);
+}
+
+/**
+ * emac_setmac: Set mac address in the adapter (internal function)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set the mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+
+	if (priv->rx_addr_type == 0) {
+		emac_set_type0addr(priv, ch, mac_addr);
+	} else if (priv->rx_addr_type == 1) {
+		u32 cnt;
+		for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++)
+			emac_set_type1addr(priv, ch, mac_addr);
+	} else if (priv->rx_addr_type == 2) {
+		emac_set_type2addr(priv, ch, mac_addr, ch, 1);
+		emac_set_type0addr(priv, ch, mac_addr);
+	} else {
+		if (netif_msg_drv(priv))
+			dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n");
+	}
+}
+
+/**
+ * emac_dev_setmac_addr: Set mac address in the adapter
+ * @ndev: The DaVinci EMAC network adapter
+ * @addr: MAC address to set in device
+ *
+ * Called by the system to set the mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static int emac_dev_setmac_addr(struct net_device *ndev, void *addr)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct emac_rxch *rxch = priv->rxch[EMAC_DEF_RX_CH];
+	struct device *emac_dev = &priv->ndev->dev;
+	struct sockaddr *sa = addr;
+
+	/* Store mac addr in priv and rx channel and set it in EMAC hw */
+	memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
+	memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
+	memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
+	emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
+					priv->mac_addr);
+
+	return 0;
+}
+
+/**
+ * emac_addbd_to_rx_queue: Recycle RX buffer descriptor
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number to process buffer descriptors for
+ * @curr_bd: current buffer descriptor
+ * @buffer: buffer pointer for descriptor
+ * @buf_token: buffer token (stores skb information)
+ *
+ * Prepares the recycled buffer descriptor and addes it to hardware
+ * receive queue - if queue empty this descriptor becomes the head
+ * else addes the descriptor to end of queue
+ *
+ */
+static void emac_addbd_to_rx_queue(struct emac_priv *priv, u32 ch,
+		struct emac_rx_bd __iomem *curr_bd,
+		char *buffer, void *buf_token)
+{
+	struct emac_rxch *rxch = priv->rxch[ch];
+
+	/* populate the hardware descriptor */
+	curr_bd->h_next = 0;
+	/* FIXME buff_ptr = dma_map_single(... buffer ...) */
+	curr_bd->buff_ptr = virt_to_phys(buffer);
+	curr_bd->off_b_len = rxch->buf_size;
+	curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT;
+	curr_bd->next = NULL;
+	curr_bd->data_ptr = buffer;
+	curr_bd->buf_token = buf_token;
+
+	/* write back  */
+	BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+	if (rxch->active_queue_head == NULL) {
+		rxch->active_queue_head = curr_bd;
+		rxch->active_queue_tail = curr_bd;
+		if (0 != rxch->queue_active) {
+			emac_write(EMAC_RXHDP(ch),
+				   emac_virt_to_phys(rxch->active_queue_head));
+			rxch->queue_active = 1;
+		}
+	} else {
+		struct emac_rx_bd __iomem *tail_bd;
+		u32 frame_status;
+
+		tail_bd = rxch->active_queue_tail;
+		rxch->active_queue_tail = curr_bd;
+		tail_bd->next = curr_bd;
+		tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
+		tail_bd->h_next = emac_virt_to_phys(curr_bd);
+		frame_status = tail_bd->mode;
+		if (frame_status & EMAC_CPPI_EOQ_BIT) {
+			emac_write(EMAC_RXHDP(ch),
+					emac_virt_to_phys(curr_bd));
+			frame_status &= ~(EMAC_CPPI_EOQ_BIT);
+			tail_bd->mode = frame_status;
+			++rxch->end_of_queue_add;
+		}
+	}
+	++rxch->recycled_bd;
+}
+
+/**
+ * emac_net_rx_cb: Prepares packet and sends to upper layer
+ * @priv: The DaVinci EMAC private adapter structure
+ * @net_pkt_list: Network packet list (received packets)
+ *
+ * Invalidates packet buffer memory and sends the received packet to upper
+ * layer
+ *
+ * Returns success or appropriate error code (none as of now)
+ */
+static int emac_net_rx_cb(struct emac_priv *priv,
+			  struct emac_netpktobj *net_pkt_list)
+{
+	struct sk_buff *p_skb;
+	p_skb = (struct sk_buff *)net_pkt_list->pkt_token;
+	/* set length of packet */
+	skb_put(p_skb, net_pkt_list->pkt_length);
+	EMAC_CACHE_INVALIDATE((unsigned long)p_skb->data, p_skb->len);
+	p_skb->protocol = eth_type_trans(p_skb, priv->ndev);
+	p_skb->dev->last_rx = jiffies;
+	netif_receive_skb(p_skb);
+	priv->net_dev_stats.rx_bytes += net_pkt_list->pkt_length;
+	priv->net_dev_stats.rx_packets++;
+	return 0;
+}
+
+/**
+ * emac_rx_bdproc: RX buffer descriptor (packet) processing
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number to process buffer descriptors for
+ * @budget: number of packets allowed to process
+ * @pending: indication to caller that packets are pending to process
+ *
+ * Processes RX buffer descriptors - checks ownership bit on the RX buffer
+ * descriptor, sends the receive packet to upper layer, allocates a new SKB
+ * and recycles the buffer descriptor (requeues it in hardware RX queue).
+ * Only "budget" number of packets are processed and indication of pending
+ * packets provided to the caller.
+ *
+ * Returns number of packets processed (and indication of pending packets)
+ */
+static int emac_rx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
+{
+	unsigned long flags;
+	u32 frame_status;
+	u32 pkts_processed = 0;
+	char *new_buffer;
+	struct emac_rx_bd __iomem *curr_bd;
+	struct emac_rx_bd __iomem *last_bd;
+	struct emac_netpktobj *curr_pkt, pkt_obj;
+	struct emac_netbufobj buf_obj;
+	struct emac_netbufobj *rx_buf_obj;
+	void *new_buf_token;
+	struct emac_rxch *rxch = priv->rxch[ch];
+
+	if (unlikely(1 == rxch->teardown_pending))
+		return 0;
+	++rxch->proc_count;
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	pkt_obj.buf_list = &buf_obj;
+	curr_pkt = &pkt_obj;
+	curr_bd = rxch->active_queue_head;
+	BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+	frame_status = curr_bd->mode;
+
+	while ((curr_bd) &&
+	       ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) &&
+	       (pkts_processed < budget)) {
+
+		new_buffer = emac_net_alloc_rx_buf(priv, rxch->buf_size,
+					&new_buf_token, EMAC_DEF_RX_CH);
+		if (unlikely(NULL == new_buffer)) {
+			++rxch->out_of_rx_buffers;
+			goto end_emac_rx_bdproc;
+		}
+
+		/* populate received packet data structure */
+		rx_buf_obj = &curr_pkt->buf_list[0];
+		rx_buf_obj->data_ptr = (char *)curr_bd->data_ptr;
+		rx_buf_obj->length = curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE;
+		rx_buf_obj->buf_token = curr_bd->buf_token;
+		curr_pkt->pkt_token = curr_pkt->buf_list->buf_token;
+		curr_pkt->num_bufs = 1;
+		curr_pkt->pkt_length =
+			(frame_status & EMAC_RX_BD_PKT_LENGTH_MASK);
+		emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd));
+		++rxch->processed_bd;
+		last_bd = curr_bd;
+		curr_bd = last_bd->next;
+		rxch->active_queue_head = curr_bd;
+
+		/* check if end of RX queue ? */
+		if (frame_status & EMAC_CPPI_EOQ_BIT) {
+			if (curr_bd) {
+				++rxch->mis_queued_packets;
+				emac_write(EMAC_RXHDP(ch),
+					   emac_virt_to_phys(curr_bd));
+			} else {
+				++rxch->end_of_queue;
+				rxch->queue_active = 0;
+			}
+		}
+
+		/* recycle BD */
+		emac_addbd_to_rx_queue(priv, ch, last_bd, new_buffer,
+				       new_buf_token);
+
+		/* return the packet to the user - BD ptr passed in
+		 * last parameter for potential *future* use */
+		spin_unlock_irqrestore(&priv->rx_lock, flags);
+		emac_net_rx_cb(priv, curr_pkt);
+		spin_lock_irqsave(&priv->rx_lock, flags);
+		curr_bd = rxch->active_queue_head;
+		if (curr_bd) {
+			BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
+			frame_status = curr_bd->mode;
+		}
+		++pkts_processed;
+	}
+
+end_emac_rx_bdproc:
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	return pkts_processed;
+}
+
+/**
+ * emac_hw_enable: Enable EMAC hardware for packet transmission/reception
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Enables EMAC hardware for packet processing - enables PHY, enables RX
+ * for packet reception and enables device interrupts and then NAPI
+ *
+ * Returns success (0) or appropriate error code (none right now)
+ */
+static int emac_hw_enable(struct emac_priv *priv)
+{
+	u32 ch, val, mbp_enable, mac_control;
+
+	/* Soft reset */
+	emac_write(EMAC_SOFTRESET, 1);
+	while (emac_read(EMAC_SOFTRESET))
+		cpu_relax();
+
+	/* Disable interrupt & Set pacing for more interrupts initially */
+	emac_int_disable(priv);
+
+	/* Full duplex enable bit set when auto negotiation happens */
+	mac_control =
+		(((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) |
+		((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) |
+		((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) |
+		((priv->duplex == DUPLEX_FULL) ? 0x1 : 0));
+	emac_write(EMAC_MACCONTROL, mac_control);
+
+	mbp_enable =
+		(((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) |
+		((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) |
+		 ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) |
+		 ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_PROMCH_SHIFT) |
+		 ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) |
+		 ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_BROADCH_SHIFT) |
+		 ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) |
+		 ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_MULTICH_SHIFT));
+	emac_write(EMAC_RXMBPENABLE, mbp_enable);
+	emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE &
+				   EMAC_RX_MAX_LEN_MASK));
+	emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET &
+					 EMAC_RX_BUFFER_OFFSET_MASK));
+	emac_write(EMAC_RXFILTERLOWTHRESH, 0);
+	emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL);
+	priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF;
+
+	val = emac_read(EMAC_TXCONTROL);
+	val |= EMAC_TX_CONTROL_TX_ENABLE_VAL;
+	emac_write(EMAC_TXCONTROL, val);
+	val = emac_read(EMAC_RXCONTROL);
+	val |= EMAC_RX_CONTROL_RX_ENABLE_VAL;
+	emac_write(EMAC_RXCONTROL, val);
+	emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL);
+
+	for (ch = 0; ch < EMAC_DEF_MAX_TX_CH; ch++) {
+		emac_write(EMAC_TXHDP(ch), 0);
+		emac_write(EMAC_TXINTMASKSET, BIT(ch));
+	}
+	for (ch = 0; ch < EMAC_DEF_MAX_RX_CH; ch++) {
+		struct emac_rxch *rxch = priv->rxch[ch];
+		emac_setmac(priv, ch, rxch->mac_addr);
+		emac_write(EMAC_RXINTMASKSET, BIT(ch));
+		rxch->queue_active = 1;
+		emac_write(EMAC_RXHDP(ch),
+			   emac_virt_to_phys(rxch->active_queue_head));
+	}
+
+	/* Enable MII */
+	val = emac_read(EMAC_MACCONTROL);
+	val |= (EMAC_MACCONTROL_MIIEN);
+	emac_write(EMAC_MACCONTROL, val);
+
+	/* Enable NAPI and interrupts */
+	napi_enable(&priv->napi);
+	emac_int_enable(priv);
+	return 0;
+
+}
+
+/**
+ * emac_poll: EMAC NAPI Poll function
+ * @ndev: The DaVinci EMAC network adapter
+ * @budget: Number of receive packets to process (as told by NAPI layer)
+ *
+ * NAPI Poll function implemented to process packets as per budget. We check
+ * the type of interrupt on the device and accordingly call the TX or RX
+ * packet processing functions. We follow the budget for RX processing and
+ * also put a cap on number of TX pkts processed through config param. The
+ * NAPI schedule function is called if more packets pending.
+ *
+ * Returns number of packets received (in most cases; else TX pkts - rarely)
+ */
+static int emac_poll(struct napi_struct *napi, int budget)
+{
+	unsigned int mask;
+	struct emac_priv *priv = container_of(napi, struct emac_priv, napi);
+	struct net_device *ndev = priv->ndev;
+	struct device *emac_dev = &ndev->dev;
+	u32 status = 0;
+	u32 num_pkts = 0;
+
+	if (!netif_running(ndev))
+		return 0;
+
+	/* Check interrupt vectors and call packet processing */
+	status = emac_read(EMAC_MACINVECTOR);
+
+	mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC;
+
+	if (priv->version == EMAC_VERSION_2)
+		mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC;
+
+	if (status & mask) {
+		num_pkts = emac_tx_bdproc(priv, EMAC_DEF_TX_CH,
+					  EMAC_DEF_TX_MAX_SERVICE);
+	} /* TX processing */
+
+	if (num_pkts)
+		return budget;
+
+	mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC;
+
+	if (priv->version == EMAC_VERSION_2)
+		mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC;
+
+	if (status & mask) {
+		num_pkts = emac_rx_bdproc(priv, EMAC_DEF_RX_CH, budget);
+	} /* RX processing */
+
+	if (num_pkts < budget) {
+		napi_complete(napi);
+		emac_int_enable(priv);
+	}
+
+	if (unlikely(status & EMAC_DM644X_MAC_IN_VECTOR_HOST_INT)) {
+		u32 ch, cause;
+		dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n");
+		netif_stop_queue(ndev);
+		napi_disable(&priv->napi);
+
+		status = emac_read(EMAC_MACSTATUS);
+		cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >>
+			 EMAC_MACSTATUS_TXERRCODE_SHIFT);
+		if (cause) {
+			ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >>
+			      EMAC_MACSTATUS_TXERRCH_SHIFT);
+			if (net_ratelimit()) {
+				dev_err(emac_dev, "TX Host error %s on ch=%d\n",
+					&emac_txhost_errcodes[cause][0], ch);
+			}
+		}
+		cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >>
+			 EMAC_MACSTATUS_RXERRCODE_SHIFT);
+		if (cause) {
+			ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >>
+			      EMAC_MACSTATUS_RXERRCH_SHIFT);
+			if (netif_msg_hw(priv) && net_ratelimit())
+				dev_err(emac_dev, "RX Host error %s on ch=%d\n",
+					&emac_rxhost_errcodes[cause][0], ch);
+		}
+	} /* Host error processing */
+
+	return num_pkts;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * emac_poll_controller: EMAC Poll controller function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Polled functionality used by netconsole and others in non interrupt mode
+ *
+ */
+void emac_poll_controller(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	emac_int_disable(priv);
+	emac_irq(ndev->irq, priv);
+	emac_int_enable(priv);
+}
+#endif
+
+/* PHY/MII bus related */
+
+/* Wait until mdio is ready for next command */
+#define MDIO_WAIT_FOR_USER_ACCESS\
+		while ((emac_mdio_read((MDIO_USERACCESS(0))) &\
+			MDIO_USERACCESS_GO) != 0)
+
+static int emac_mii_read(struct mii_bus *bus, int phy_id, int phy_reg)
+{
+	unsigned int phy_data = 0;
+	unsigned int phy_control;
+
+	/* Wait until mdio is ready for next command */
+	MDIO_WAIT_FOR_USER_ACCESS;
+
+	phy_control = (MDIO_USERACCESS_GO |
+		       MDIO_USERACCESS_READ |
+		       ((phy_reg << 21) & MDIO_USERACCESS_REGADR) |
+		       ((phy_id << 16) & MDIO_USERACCESS_PHYADR) |
+		       (phy_data & MDIO_USERACCESS_DATA));
+	emac_mdio_write(MDIO_USERACCESS(0), phy_control);
+
+	/* Wait until mdio is ready for next command */
+	MDIO_WAIT_FOR_USER_ACCESS;
+
+	return emac_mdio_read(MDIO_USERACCESS(0)) & MDIO_USERACCESS_DATA;
+
+}
+
+static int emac_mii_write(struct mii_bus *bus, int phy_id,
+			  int phy_reg, u16 phy_data)
+{
+
+	unsigned int control;
+
+	/*  until mdio is ready for next command */
+	MDIO_WAIT_FOR_USER_ACCESS;
+
+	control = (MDIO_USERACCESS_GO |
+		   MDIO_USERACCESS_WRITE |
+		   ((phy_reg << 21) & MDIO_USERACCESS_REGADR) |
+		   ((phy_id << 16) & MDIO_USERACCESS_PHYADR) |
+		   (phy_data & MDIO_USERACCESS_DATA));
+	emac_mdio_write(MDIO_USERACCESS(0), control);
+
+	return 0;
+}
+
+static int emac_mii_reset(struct mii_bus *bus)
+{
+	unsigned int clk_div;
+	int mdio_bus_freq = emac_bus_frequency;
+
+	if (mdio_max_freq & mdio_bus_freq)
+		clk_div = ((mdio_bus_freq / mdio_max_freq) - 1);
+	else
+		clk_div = 0xFF;
+
+	clk_div &= MDIO_CONTROL_CLKDIV;
+
+	/* Set enable and clock divider in MDIOControl */
+	emac_mdio_write(MDIO_CONTROL, (clk_div | MDIO_CONTROL_ENABLE));
+
+	return 0;
+
+}
+
+static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, PHY_POLL };
+
+/* emac_driver: EMAC MII bus structure */
+
+static struct mii_bus *emac_mii;
+
+static void emac_adjust_link(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phydev = priv->phydev;
+	unsigned long flags;
+	int new_state = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (phydev->link) {
+		/* check the mode of operation - full/half duplex */
+		if (phydev->duplex != priv->duplex) {
+			new_state = 1;
+			priv->duplex = phydev->duplex;
+		}
+		if (phydev->speed != priv->speed) {
+			new_state = 1;
+			priv->speed = phydev->speed;
+		}
+		if (!priv->link) {
+			new_state = 1;
+			priv->link = 1;
+		}
+
+	} else if (priv->link) {
+		new_state = 1;
+		priv->link = 0;
+		priv->speed = 0;
+		priv->duplex = ~0;
+	}
+	if (new_state) {
+		emac_update_phystatus(priv);
+		phy_print_status(priv->phydev);
+	}
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+/*************************************************************************
+ *  Linux Driver Model
+ *************************************************************************/
+
+/**
+ * emac_devioctl: EMAC adapter ioctl
+ * @ndev: The DaVinci EMAC network adapter
+ * @ifrq: request parameter
+ * @cmd: command parameter
+ *
+ * EMAC driver ioctl function
+ *
+ * Returns success(0) or appropriate error code
+ */
+static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
+{
+	dev_warn(&ndev->dev, "DaVinci EMAC: ioctl not supported\n");
+
+	if (!(netif_running(ndev)))
+		return -EINVAL;
+
+	/* TODO: Add phy read and write and private statistics get feature */
+
+	return -EOPNOTSUPP;
+}
+
+/**
+ * emac_dev_open: EMAC device open
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to start the interface. We init TX/RX channels
+ * and enable the hardware for packet reception/transmission and start the
+ * network queue.
+ *
+ * Returns 0 for a successful open, or appropriate error code
+ */
+static int emac_dev_open(struct net_device *ndev)
+{
+	struct device *emac_dev = &ndev->dev;
+	u32 rc, cnt, ch;
+	int phy_addr;
+	struct resource *res;
+	int q, m;
+	int i = 0;
+	int k = 0;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	netif_carrier_off(ndev);
+	for (cnt = 0; cnt <= ETH_ALEN; cnt++)
+		ndev->dev_addr[cnt] = priv->mac_addr[cnt];
+
+	/* Configuration items */
+	priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN;
+
+	/* Clear basic hardware */
+	for (ch = 0; ch < EMAC_MAX_TXRX_CHANNELS; ch++) {
+		emac_write(EMAC_TXHDP(ch), 0);
+		emac_write(EMAC_RXHDP(ch), 0);
+		emac_write(EMAC_RXHDP(ch), 0);
+		emac_write(EMAC_RXINTMASKCLEAR, EMAC_INT_MASK_CLEAR);
+		emac_write(EMAC_TXINTMASKCLEAR, EMAC_INT_MASK_CLEAR);
+	}
+	priv->mac_hash1 = 0;
+	priv->mac_hash2 = 0;
+	emac_write(EMAC_MACHASH1, 0);
+	emac_write(EMAC_MACHASH2, 0);
+
+	/* multi ch not supported - open 1 TX, 1RX ch by default */
+	rc = emac_init_txch(priv, EMAC_DEF_TX_CH);
+	if (0 != rc) {
+		dev_err(emac_dev, "DaVinci EMAC: emac_init_txch() failed");
+		return rc;
+	}
+	rc = emac_init_rxch(priv, EMAC_DEF_RX_CH, priv->mac_addr);
+	if (0 != rc) {
+		dev_err(emac_dev, "DaVinci EMAC: emac_init_rxch() failed");
+		return rc;
+	}
+
+	/* Request IRQ */
+
+	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
+		for (i = res->start; i <= res->end; i++) {
+			if (request_irq(i, emac_irq, IRQF_DISABLED,
+					ndev->name, ndev))
+				goto rollback;
+		}
+		k++;
+	}
+
+	/* Start/Enable EMAC hardware */
+	emac_hw_enable(priv);
+
+	/* find the first phy */
+	priv->phydev = NULL;
+	if (priv->phy_mask) {
+		emac_mii_reset(priv->mii_bus);
+		for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+			if (priv->mii_bus->phy_map[phy_addr]) {
+				priv->phydev = priv->mii_bus->phy_map[phy_addr];
+				break;
+			}
+		}
+
+		if (!priv->phydev) {
+			printk(KERN_ERR "%s: no PHY found\n", ndev->name);
+			return -1;
+		}
+
+		priv->phydev = phy_connect(ndev, dev_name(&priv->phydev->dev),
+				&emac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+
+		if (IS_ERR(priv->phydev)) {
+			printk(KERN_ERR "%s: Could not attach to PHY\n",
+								ndev->name);
+			return PTR_ERR(priv->phydev);
+		}
+
+		priv->link = 0;
+		priv->speed = 0;
+		priv->duplex = ~0;
+
+		printk(KERN_INFO "%s: attached PHY driver [%s] "
+			"(mii_bus:phy_addr=%s, id=%x)\n", ndev->name,
+			priv->phydev->drv->name, dev_name(&priv->phydev->dev),
+			priv->phydev->phy_id);
+	} else{
+		/* No PHY , fix the link, speed and duplex settings */
+		priv->link = 1;
+		priv->speed = SPEED_100;
+		priv->duplex = DUPLEX_FULL;
+		emac_update_phystatus(priv);
+	}
+
+	if (!netif_running(ndev)) /* debug only - to avoid compiler warning */
+		emac_dump_regs(priv);
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name);
+
+	if (priv->phy_mask)
+		phy_start(priv->phydev);
+
+	return 0;
+
+rollback:
+
+	dev_err(emac_dev, "DaVinci EMAC: request_irq() failed");
+
+	for (q = k; k >= 0; k--) {
+		for (m = i; m >= res->start; m--)
+			free_irq(m, ndev);
+		res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1);
+		m = res->end;
+	}
+	return -EBUSY;
+}
+
+/**
+ * emac_dev_stop: EMAC device stop
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to stop or down the interface. We stop the network
+ * queue, disable interrupts and cleanup TX/RX channels.
+ *
+ * We return the statistics in net_device_stats structure pulled from emac
+ */
+static int emac_dev_stop(struct net_device *ndev)
+{
+	struct resource *res;
+	int i = 0;
+	int irq_num;
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct device *emac_dev = &ndev->dev;
+
+	/* inform the upper layers. */
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+
+	netif_carrier_off(ndev);
+	emac_int_disable(priv);
+	emac_stop_txch(priv, EMAC_DEF_TX_CH);
+	emac_stop_rxch(priv, EMAC_DEF_RX_CH);
+	emac_cleanup_txch(priv, EMAC_DEF_TX_CH);
+	emac_cleanup_rxch(priv, EMAC_DEF_RX_CH);
+	emac_write(EMAC_SOFTRESET, 1);
+
+	if (priv->phydev)
+		phy_disconnect(priv->phydev);
+
+	/* Free IRQ */
+	while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
+		for (irq_num = res->start; irq_num <= res->end; irq_num++)
+			free_irq(irq_num, priv->ndev);
+		i++;
+	}
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
+
+	return 0;
+}
+
+/**
+ * emac_dev_getnetstats: EMAC get statistics function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to get statistics from the device.
+ *
+ * We return the statistics in net_device_stats structure pulled from emac
+ */
+static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	/* update emac hardware stats and reset the registers*/
+
+	priv->net_dev_stats.multicast += emac_read(EMAC_RXMCASTFRAMES);
+	emac_write(EMAC_RXMCASTFRAMES, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.collisions += (emac_read(EMAC_TXCOLLISION) +
+					   emac_read(EMAC_TXSINGLECOLL) +
+					   emac_read(EMAC_TXMULTICOLL));
+	emac_write(EMAC_TXCOLLISION, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_TXSINGLECOLL, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_TXMULTICOLL, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) +
+						emac_read(EMAC_RXJABBER) +
+						emac_read(EMAC_RXUNDERSIZED));
+	emac_write(EMAC_RXOVERSIZED, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXJABBER, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXUNDERSIZED, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) +
+					       emac_read(EMAC_RXMOFOVERRUNS));
+	emac_write(EMAC_RXSOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+	emac_write(EMAC_RXMOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS);
+	emac_write(EMAC_RXDMAOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.tx_carrier_errors +=
+		emac_read(EMAC_TXCARRIERSENSE);
+	emac_write(EMAC_TXCARRIERSENSE, EMAC_ALL_MULTI_REG_VALUE);
+
+	priv->net_dev_stats.tx_fifo_errors = emac_read(EMAC_TXUNDERRUN);
+	emac_write(EMAC_TXUNDERRUN, EMAC_ALL_MULTI_REG_VALUE);
+
+	return &priv->net_dev_stats;
+}
+
+static const struct net_device_ops emac_netdev_ops = {
+	.ndo_open		= emac_dev_open,
+	.ndo_stop		= emac_dev_stop,
+	.ndo_start_xmit		= emac_dev_xmit,
+	.ndo_set_multicast_list	= emac_dev_mcast_set,
+	.ndo_set_mac_address	= emac_dev_setmac_addr,
+	.ndo_do_ioctl		= emac_devioctl,
+	.ndo_tx_timeout		= emac_dev_tx_timeout,
+	.ndo_get_stats		= emac_dev_getnetstats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= emac_poll_controller,
+#endif
+};
+
+/**
+ * davinci_emac_probe: EMAC device probe
+ * @pdev: The DaVinci EMAC device that we are removing
+ *
+ * Called when probing for emac devicesr. We get details of instances and
+ * resource information from platform init and register a network device
+ * and allocate resources necessary for driver to perform
+ */
+static int __devinit davinci_emac_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct resource *res;
+	struct net_device *ndev;
+	struct emac_priv *priv;
+	unsigned long size;
+	struct emac_platform_data *pdata;
+	struct device *emac_dev;
+
+	/* obtain emac clock from kernel */
+	emac_clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(emac_clk)) {
+		printk(KERN_ERR "DaVinci EMAC: Failed to get EMAC clock\n");
+		return -EBUSY;
+	}
+	emac_bus_frequency = clk_get_rate(emac_clk);
+	/* TODO: Probe PHY here if possible */
+
+	ndev = alloc_etherdev(sizeof(struct emac_priv));
+	if (!ndev) {
+		printk(KERN_ERR "DaVinci EMAC: Error allocating net_device\n");
+		clk_put(emac_clk);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, ndev);
+	priv = netdev_priv(ndev);
+	priv->pdev = pdev;
+	priv->ndev = ndev;
+	priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG);
+
+	spin_lock_init(&priv->tx_lock);
+	spin_lock_init(&priv->rx_lock);
+	spin_lock_init(&priv->lock);
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		printk(KERN_ERR "DaVinci EMAC: No platfrom data\n");
+		return -ENODEV;
+	}
+
+	/* MAC addr and PHY mask , RMII enable info from platform_data */
+	memcpy(priv->mac_addr, pdata->mac_addr, 6);
+	priv->phy_mask = pdata->phy_mask;
+	priv->rmii_en = pdata->rmii_en;
+	priv->version = pdata->version;
+	emac_dev = &ndev->dev;
+	/* Get EMAC platform data */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(emac_dev, "DaVinci EMAC: Error getting res\n");
+		rc = -ENOENT;
+		goto probe_quit;
+	}
+
+	priv->emac_base_phys = res->start + pdata->ctrl_reg_offset;
+	size = res->end - res->start + 1;
+	if (!request_mem_region(res->start, size, ndev->name)) {
+		dev_err(emac_dev, "DaVinci EMAC: failed request_mem_region() \
+					 for regs\n");
+		rc = -ENXIO;
+		goto probe_quit;
+	}
+
+	priv->remap_addr = ioremap(res->start, size);
+	if (!priv->remap_addr) {
+		dev_err(emac_dev, "Unable to map IO\n");
+		rc = -ENOMEM;
+		release_mem_region(res->start, size);
+		goto probe_quit;
+	}
+	priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset;
+	ndev->base_addr = (unsigned long)priv->remap_addr;
+
+	priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
+	priv->ctrl_ram_size = pdata->ctrl_ram_size;
+	priv->emac_ctrl_ram = priv->remap_addr + pdata->ctrl_ram_offset;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(emac_dev, "DaVinci EMAC: Error getting irq res\n");
+		rc = -ENOENT;
+		goto no_irq_res;
+	}
+	ndev->irq = res->start;
+
+	if (!is_valid_ether_addr(priv->mac_addr)) {
+		/* Use random MAC if none passed */
+		random_ether_addr(priv->mac_addr);
+		printk(KERN_WARNING "%s: using random MAC addr: %pM\n",
+				__func__, priv->mac_addr);
+	}
+
+	ndev->netdev_ops = &emac_netdev_ops;
+	SET_ETHTOOL_OPS(ndev, &ethtool_ops);
+	netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
+
+	/* register the network device */
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	rc = register_netdev(ndev);
+	if (rc) {
+		dev_err(emac_dev, "DaVinci EMAC: Error in register_netdev\n");
+		rc = -ENODEV;
+		goto netdev_reg_err;
+	}
+
+	clk_enable(emac_clk);
+
+	/* MII/Phy intialisation, mdio bus registration */
+	emac_mii = mdiobus_alloc();
+	if (emac_mii == NULL) {
+		dev_err(emac_dev, "DaVinci EMAC: Error allocating mii_bus\n");
+		rc = -ENOMEM;
+		goto mdio_alloc_err;
+	}
+
+	priv->mii_bus = emac_mii;
+	emac_mii->name  = "emac-mii",
+	emac_mii->read  = emac_mii_read,
+	emac_mii->write = emac_mii_write,
+	emac_mii->reset = emac_mii_reset,
+	emac_mii->irq   = mii_irqs,
+	emac_mii->phy_mask = ~(priv->phy_mask);
+	emac_mii->parent = &pdev->dev;
+	emac_mii->priv = priv->remap_addr + pdata->mdio_reg_offset;
+	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", priv->pdev->id);
+	mdio_max_freq = pdata->mdio_max_freq;
+	emac_mii->reset(emac_mii);
+
+	/* Register the MII bus */
+	rc = mdiobus_register(emac_mii);
+	if (rc)
+		goto mdiobus_quit;
+
+	if (netif_msg_probe(priv)) {
+		dev_notice(emac_dev, "DaVinci EMAC Probe found device "\
+			   "(regs: %p, irq: %d)\n",
+			   (void *)priv->emac_base_phys, ndev->irq);
+	}
+	return 0;
+
+mdiobus_quit:
+	mdiobus_free(emac_mii);
+
+netdev_reg_err:
+mdio_alloc_err:
+no_irq_res:
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+	iounmap(priv->remap_addr);
+
+probe_quit:
+	clk_put(emac_clk);
+	free_netdev(ndev);
+	return rc;
+}
+
+/**
+ * davinci_emac_remove: EMAC device remove
+ * @pdev: The DaVinci EMAC device that we are removing
+ *
+ * Called when removing the device driver. We disable clock usage and release
+ * the resources taken up by the driver and unregister network device
+ */
+static int __devexit davinci_emac_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n");
+
+	clk_disable(emac_clk);
+	platform_set_drvdata(pdev, NULL);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mdiobus_unregister(priv->mii_bus);
+	mdiobus_free(priv->mii_bus);
+
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	unregister_netdev(ndev);
+	free_netdev(ndev);
+	iounmap(priv->remap_addr);
+
+	clk_disable(emac_clk);
+	clk_put(emac_clk);
+
+	return 0;
+}
+
+/**
+ * davinci_emac_driver: EMAC platform driver structure
+ *
+ * We implement only probe and remove functions - suspend/resume and
+ * others not supported by this module
+ */
+static struct platform_driver davinci_emac_driver = {
+	.driver = {
+		.name	 = "davinci_emac",
+		.owner	 = THIS_MODULE,
+	},
+	.probe = davinci_emac_probe,
+	.remove = __devexit_p(davinci_emac_remove),
+};
+
+/**
+ * davinci_emac_init: EMAC driver module init
+ *
+ * Called when initializing the driver. We register the driver with
+ * the platform.
+ */
+static int __init davinci_emac_init(void)
+{
+	return platform_driver_register(&davinci_emac_driver);
+}
+module_init(davinci_emac_init);
+
+/**
+ * davinci_emac_exit: EMAC driver module exit
+ *
+ * Called when exiting the driver completely. We unregister the driver with
+ * the platform and exit
+ */
+static void __exit davinci_emac_exit(void)
+{
+	platform_driver_unregister(&davinci_emac_driver);
+}
+module_exit(davinci_emac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>");
+MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>");
+MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver");
diff --git a/drivers/net/de600.c b/drivers/net/de600.c
index de63f1d41d3..e1af089064b 100644
--- a/drivers/net/de600.c
+++ b/drivers/net/de600.c
@@ -38,14 +38,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $,  Bjorn Ekwall (bj
 /* Add more time here if your adapter won't work OK: */
 #define DE600_SLOW_DOWN	udelay(delay_time)
 
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifdef DE600_DEBUG
-#define PRINTK(x) if (de600_debug >= 2) printk x
-#else
-#define DE600_DEBUG 0
-#define PRINTK(x) /**/
-#endif
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -67,10 +59,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $,  Bjorn Ekwall (bj
 
 #include "de600.h"
 
-static unsigned int de600_debug = DE600_DEBUG;
-module_param(de600_debug, int, 0);
-MODULE_PARM_DESC(de600_debug, "DE-600 debug level (0-2)");
-
 static unsigned int check_lost = 1;
 module_param(check_lost, bool, 0);
 MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600");
@@ -180,20 +168,20 @@ static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (free_tx_pages <= 0) {	/* Do timeouts, to avoid hangs. */
 		tickssofar = jiffies - dev->trans_start;
 		if (tickssofar < 5)
-			return 1;
+			return NETDEV_TX_BUSY;
 		/* else */
 		printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
 		/* Restart the adapter. */
 		spin_lock_irqsave(&de600_lock, flags);
 		if (adapter_init(dev)) {
 			spin_unlock_irqrestore(&de600_lock, flags);
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 		spin_unlock_irqrestore(&de600_lock, flags);
 	}
 
 	/* Start real output */
-	PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));
+	pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages);
 
 	if ((len = skb->len) < RUNT)
 		len = RUNT;
@@ -211,7 +199,7 @@ static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
 			if (adapter_init(dev)) {
 				spin_unlock_irqrestore(&de600_lock, flags);
-				return 1;
+				return NETDEV_TX_BUSY;
 			}
 		}
 	}
@@ -259,7 +247,7 @@ static irqreturn_t de600_interrupt(int irq, void *dev_id)
 	irq_status = de600_read_status(dev);
 
 	do {
-		PRINTK(("de600_interrupt (%02X)\n", irq_status));
+		pr_debug("de600_interrupt (%02X)\n", irq_status);
 
 		if (irq_status & RX_GOOD)
 			de600_rx_intr(dev);
@@ -407,8 +395,7 @@ static struct net_device * __init de600_probe(void)
 
 	printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
 	/* Alpha testers must have the version number to report bugs. */
-	if (de600_debug > 1)
-		printk(version);
+	pr_debug("%s", version);
 
 	/* probe for adapter */
 	err = -ENODEV;
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index d52f34cc952..55d2bb67cff 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -48,7 +48,6 @@ static const char version[] =
  * Compile-time options: (see below for descriptions)
  * -DDE620_IO=0x378	(lpt1)
  * -DDE620_IRQ=7	(lpt1)
- * -DDE602_DEBUG=...
  * -DSHUTDOWN_WHEN_LOST
  * -DCOUNT_LOOPS
  * -DLOWSPEED
@@ -98,15 +97,6 @@ static const char version[] =
 #define SHUTDOWN_WHEN_LOST
  */
 
-/*
- * Enable debugging by "-DDE620_DEBUG=3" when compiling,
- * OR by enabling the following #define
- *
- * use 0 for production, 1 for verification, >2 for debug
- *
-#define DE620_DEBUG 3
- */
-
 #ifdef LOWSPEED
 /*
  * Enable this #define if you want to see debugging output that show how long
@@ -160,14 +150,6 @@ typedef unsigned char byte;
 #define RUNT 60		/* Too small Ethernet packet */
 #define GIANT 1514	/* largest legal size packet, no fcs */
 
-#ifdef DE620_DEBUG /* Compile-time configurable */
-#define PRINTK(x) if (de620_debug >= 2) printk x
-#else
-#define DE620_DEBUG 0
-#define PRINTK(x) /**/
-#endif
-
-
 /*
  * Force media with insmod:
  *	insmod de620.o bnc=1
@@ -186,8 +168,6 @@ static int io  = DE620_IO;
 static int irq = DE620_IRQ;
 static int clone = DE620_CLONE;
 
-static unsigned int de620_debug = DE620_DEBUG;
-
 static spinlock_t de620_lock;
 
 module_param(bnc, int, 0);
@@ -195,13 +175,11 @@ module_param(utp, int, 0);
 module_param(io, int, 0);
 module_param(irq, int, 0);
 module_param(clone, int, 0);
-module_param(de620_debug, int, 0);
 MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)");
 MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)");
 MODULE_PARM_DESC(io, "DE-620 I/O base address,required");
 MODULE_PARM_DESC(irq, "DE-620 IRQ number,required");
 MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)");
-MODULE_PARM_DESC(de620_debug, "DE-620 debug level (0-2)");
 
 /***********************************************
  *                                             *
@@ -533,9 +511,9 @@ static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Start real output */
 
-	spin_lock_irqsave(&de620_lock, flags)
-	PRINTK(("de620_start_xmit: len=%d, bufs 0x%02x\n",
-		(int)skb->len, using_txbuf));
+	spin_lock_irqsave(&de620_lock, flags);
+	pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n",
+		(int)skb->len, using_txbuf);
 
 	/* select a free tx buffer. if there is one... */
 	switch (using_txbuf) {
@@ -553,7 +531,7 @@ static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	case (TXBF0 | TXBF1): /* NONE!!! */
 		printk(KERN_WARNING "%s: No tx-buffer available!\n", dev->name);
 		spin_unlock_irqrestore(&de620_lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	de620_write_block(dev, buffer, skb->len, len-skb->len);
 
@@ -585,12 +563,12 @@ de620_interrupt(int irq_in, void *dev_id)
 	/* Read the status register (_not_ the status port) */
 	irq_status = de620_get_register(dev, R_STS);
 
-	PRINTK(("de620_interrupt (%2.2X)\n", irq_status));
+	pr_debug("de620_interrupt (%2.2X)\n", irq_status);
 
 	if (irq_status & RXGOOD) {
 		do {
 			again = de620_rx_intr(dev);
-			PRINTK(("again=%d\n", again));
+			pr_debug("again=%d\n", again);
 		}
 		while (again && (++bogus_count < 100));
 	}
@@ -622,7 +600,7 @@ static int de620_rx_intr(struct net_device *dev)
 	byte pagelink;
 	byte curr_page;
 
-	PRINTK(("de620_rx_intr: next_rx_page = %d\n", next_rx_page));
+	pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page);
 
 	/* Tell the adapter that we are going to read data, and from where */
 	de620_send_command(dev, W_CR | RRN);
@@ -631,8 +609,9 @@ static int de620_rx_intr(struct net_device *dev)
 
 	/* Deep breath, and away we goooooo */
 	de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf));
-	PRINTK(("page status=0x%02x, nextpage=%d, packetsize=%d\n",
-	header_buf.status, header_buf.Rx_NextPage, header_buf.Rx_ByteCount));
+	pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n",
+		header_buf.status, header_buf.Rx_NextPage,
+		header_buf.Rx_ByteCount);
 
 	/* Plausible page header? */
 	pagelink = header_buf.Rx_NextPage;
@@ -683,7 +662,7 @@ static int de620_rx_intr(struct net_device *dev)
 			buffer = skb_put(skb,size);
 			/* copy the packet into the buffer */
 			de620_read_block(dev, buffer, size);
-			PRINTK(("Read %d bytes\n", size));
+			pr_debug("Read %d bytes\n", size);
 			skb->protocol=eth_type_trans(skb,dev);
 			netif_rx(skb); /* deliver it "upstairs" */
 			/* count all receives */
@@ -696,7 +675,7 @@ static int de620_rx_intr(struct net_device *dev)
 	/* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */
 	curr_page = de620_get_register(dev, R_CPR);
 	de620_set_register(dev, W_NPRF, next_rx_page);
-	PRINTK(("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page));
+	pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page);
 
 	return (next_rx_page != curr_page); /* That was slightly tricky... */
 }
@@ -830,8 +809,7 @@ struct net_device * __init de620_probe(int unit)
 		netdev_boot_setup_check(dev);
 	}
 
-	if (de620_debug)
-		printk(version);
+	pr_debug("%s", version);
 
 	printk(KERN_INFO "D-Link DE-620 pocket adapter");
 
@@ -878,14 +856,13 @@ struct net_device * __init de620_probe(int unit)
 	/* base_addr and irq are already set, see above! */
 
 	/* dump eeprom */
-	if (de620_debug) {
-		printk("\nEEPROM contents:\n");
-		printk("RAM_Size = 0x%02X\n", nic_data.RAM_Size);
-		printk("NodeID = %pM\n", nic_data.NodeID);
-		printk("Model = %d\n", nic_data.Model);
-		printk("Media = %d\n", nic_data.Media);
-		printk("SCR = 0x%02x\n", nic_data.SCR);
-	}
+	pr_debug("\nEEPROM contents:\n"
+		"RAM_Size = 0x%02X\n"
+		"NodeID = %pM\n"
+		"Model = %d\n"
+		"Media = %d\n"
+		"SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID,
+		nic_data.Model, nic_data.Media, nic_data.SCR);
 
 	err = register_netdev(dev);
 	if (err)
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index b62405a6918..2b22e580c4d 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -895,6 +895,7 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct lance_private *lp = netdev_priv(dev);
 	volatile struct lance_regs *ll = lp->ll;
 	volatile u16 *ib = (volatile u16 *)dev->mem_start;
+	unsigned long flags;
 	int entry, len;
 
 	len = skb->len;
@@ -907,6 +908,8 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev->stats.tx_bytes += len;
 
+	spin_lock_irqsave(&lp->lock, flags);
+
 	entry = lp->tx_new;
 	*lib_ptr(ib, btx_ring[entry].length, lp->type) = (-len);
 	*lib_ptr(ib, btx_ring[entry].misc, lp->type) = 0;
@@ -925,6 +928,8 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Kick the lance: transmit now */
 	writereg(&ll->rdp, LE_C0_INEA | LE_C0_TDMD);
 
+	spin_unlock_irqrestore(&lp->lock, flags);
+
 	dev->trans_start = jiffies;
 	dev_kfree_skb(skb);
 
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 4ec055dc717..102b8d43971 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -3318,7 +3318,7 @@ static int dfx_xmt_queue_pkt(
 	{
 		skb_pull(skb,3);
 		spin_unlock_irqrestore(&bp->lock, flags);
-		return(1);			/* requeue packet for later */
+		return NETDEV_TX_BUSY;	/* requeue packet for later */
 	}
 
 	/*
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 357f565851e..97ea2d6d3fe 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -810,7 +810,7 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
 
 	dev->mem_start = 0;
 
-	device->driver_data = dev;
+	dev_set_drvdata(device, dev);
 	SET_NETDEV_DEV (dev, device);
 
 	status = register_netdev(dev);
@@ -957,7 +957,7 @@ static int depca_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (TX_BUFFS_AVAIL)
 			netif_start_queue(dev);
 	} else
-		status = -1;
+		status = NETDEV_TX_LOCKED;
 
       out:
 	return status;
@@ -1614,7 +1614,7 @@ static int __devexit depca_device_remove (struct device *device)
 	struct depca_private *lp;
 	int bus;
 
-	dev  = device->driver_data;
+	dev  = dev_get_drvdata(device);
 	lp   = netdev_priv(dev);
 
 	unregister_netdev (dev);
@@ -1839,7 +1839,7 @@ static int load_packet(struct net_device *dev, struct sk_buff *skb)
 
 		lp->tx_new = (++end) & lp->txRingMask;	/* update current pointers */
 	} else {
-		status = -1;
+		status = NETDEV_TX_LOCKED;
 	}
 
 	return status;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 4a1b554654e..895d72143ee 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -539,7 +539,7 @@ rio_tx_timeout (struct net_device *dev)
 		dev->name, readl (ioaddr + TxStatus));
 	rio_free_tx(dev, 0);
 	dev->if_port = 0;
-	dev->trans_start = jiffies;
+	dev->trans_start = jiffies; /* prevent tx timeout */
 }
 
  /* allocate and initialize Tx and Rx descriptors */
@@ -610,7 +610,7 @@ start_xmit (struct sk_buff *skb, struct net_device *dev)
 
 	if (np->link_status == 0) {	/* Link Down */
 		dev_kfree_skb(skb);
-		return 0;
+		return NETDEV_TX_OK;
 	}
 	ioaddr = dev->base_addr;
 	entry = np->cur_tx % TX_RING_SIZE;
@@ -665,9 +665,7 @@ start_xmit (struct sk_buff *skb, struct net_device *dev)
 		writel (0, dev->base_addr + TFDListPtr1);
 	}
 
-	/* NETDEV WATCHDOG timer */
-	dev->trans_start = jiffies;
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static irqreturn_t
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index d8350860c0f..dd771dea6ae 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -756,7 +756,7 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dm9000_dbg(db, 3, "%s:\n", __func__);
 
 	if (db->tx_pkt_cnt > 1)
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	spin_lock_irqsave(&db->lock, flags);
 
@@ -1170,6 +1170,21 @@ dm9000_stop(struct net_device *ndev)
 	return 0;
 }
 
+static const struct net_device_ops dm9000_netdev_ops = {
+	.ndo_open		= dm9000_open,
+	.ndo_stop		= dm9000_stop,
+	.ndo_start_xmit		= dm9000_start_xmit,
+	.ndo_tx_timeout		= dm9000_timeout,
+	.ndo_set_multicast_list	= dm9000_hash_table,
+	.ndo_do_ioctl		= dm9000_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= dm9000_poll_controller,
+#endif
+};
+
 #define res_size(_r) (((_r)->end - (_r)->start) + 1)
 
 /*
@@ -1339,18 +1354,9 @@ dm9000_probe(struct platform_device *pdev)
 	/* driver system function */
 	ether_setup(ndev);
 
-	ndev->open		 = &dm9000_open;
-	ndev->hard_start_xmit    = &dm9000_start_xmit;
-	ndev->tx_timeout         = &dm9000_timeout;
-	ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
-	ndev->stop		 = &dm9000_stop;
-	ndev->set_multicast_list = &dm9000_hash_table;
-	ndev->ethtool_ops	 = &dm9000_ethtool_ops;
-	ndev->do_ioctl		 = &dm9000_ioctl;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	ndev->poll_controller	 = &dm9000_poll_controller;
-#endif
+	ndev->netdev_ops	= &dm9000_netdev_ops;
+	ndev->watchdog_timeo	= msecs_to_jiffies(watchdog);
+	ndev->ethtool_ops	= &dm9000_ethtool_ops;
 
 	db->msg_enable       = NETIF_MSG_LINK;
 	db->mii.phy_id_mask  = 0x1f;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 0f9ee134855..f7929e89eb0 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -143,6 +143,8 @@
  *	FIXES:
  * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
  *	- Stratus87247: protect MDI control register manipulations
+ * 2009/06/01 - Andreas Mohr <andi at lisas dot de>
+ *      - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
  */
 
 #include <linux/module.h>
@@ -372,6 +374,7 @@ enum eeprom_op {
 
 enum eeprom_offsets {
 	eeprom_cnfg_mdix  = 0x03,
+	eeprom_phy_iface  = 0x06,
 	eeprom_id         = 0x0A,
 	eeprom_config_asf = 0x0D,
 	eeprom_smbus_addr = 0x90,
@@ -381,6 +384,18 @@ enum eeprom_cnfg_mdix {
 	eeprom_mdix_enabled = 0x0080,
 };
 
+enum eeprom_phy_iface {
+	NoSuchPhy = 0,
+	I82553AB,
+	I82553C,
+	I82503,
+	DP83840,
+	S80C240,
+	S80C24,
+	I82555,
+	DP83840A = 10,
+};
+
 enum eeprom_id {
 	eeprom_id_wol = 0x0020,
 };
@@ -545,6 +560,7 @@ struct nic {
 	u32 msg_enable				____cacheline_aligned;
 	struct net_device *netdev;
 	struct pci_dev *pdev;
+	u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data);
 
 	struct rx *rxs				____cacheline_aligned;
 	struct rx *rx_to_use;
@@ -899,7 +915,21 @@ err_unlock:
 	return err;
 }
 
-static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
+static int mdio_read(struct net_device *netdev, int addr, int reg)
+{
+	struct nic *nic = netdev_priv(netdev);
+	return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0);
+}
+
+static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
+{
+	struct nic *nic = netdev_priv(netdev);
+
+	nic->mdio_ctrl(nic, addr, mdi_write, reg, data);
+}
+
+/* the standard mdio_ctrl() function for usual MII-compliant hardware */
+static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
 {
 	u32 data_out = 0;
 	unsigned int i;
@@ -938,30 +968,83 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
 	return (u16)data_out;
 }
 
-static int mdio_read(struct net_device *netdev, int addr, int reg)
-{
-	return mdio_ctrl(netdev_priv(netdev), addr, mdi_read, reg, 0);
+/* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */
+static u16 mdio_ctrl_phy_82552_v(struct nic *nic,
+				 u32 addr,
+				 u32 dir,
+				 u32 reg,
+				 u16 data)
+{
+	if ((reg == MII_BMCR) && (dir == mdi_write)) {
+		if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) {
+			u16 advert = mdio_read(nic->netdev, nic->mii.phy_id,
+							MII_ADVERTISE);
+
+			/*
+			 * Workaround Si issue where sometimes the part will not
+			 * autoneg to 100Mbps even when advertised.
+			 */
+			if (advert & ADVERTISE_100FULL)
+				data |= BMCR_SPEED100 | BMCR_FULLDPLX;
+			else if (advert & ADVERTISE_100HALF)
+				data |= BMCR_SPEED100;
+		}
+	}
+	return mdio_ctrl_hw(nic, addr, dir, reg, data);
 }
 
-static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
-{
-	struct nic *nic = netdev_priv(netdev);
-
-	if  ((nic->phy == phy_82552_v) && (reg == MII_BMCR) &&
-	     (data & (BMCR_ANRESTART | BMCR_ANENABLE))) {
-		u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
-
-		/*
-		 * Workaround Si issue where sometimes the part will not
-		 * autoneg to 100Mbps even when advertised.
-		 */
-		if (advert & ADVERTISE_100FULL)
-			data |= BMCR_SPEED100 | BMCR_FULLDPLX;
-		else if (advert & ADVERTISE_100HALF)
-			data |= BMCR_SPEED100;
+/* Fully software-emulated mdio_ctrl() function for cards without
+ * MII-compliant PHYs.
+ * For now, this is mainly geared towards 80c24 support; in case of further
+ * requirements for other types (i82503, ...?) either extend this mechanism
+ * or split it, whichever is cleaner.
+ */
+static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic,
+				      u32 addr,
+				      u32 dir,
+				      u32 reg,
+				      u16 data)
+{
+	/* might need to allocate a netdev_priv'ed register array eventually
+	 * to be able to record state changes, but for now
+	 * some fully hardcoded register handling ought to be ok I guess. */
+
+	if (dir == mdi_read) {
+		switch (reg) {
+		case MII_BMCR:
+			/* Auto-negotiation, right? */
+			return  BMCR_ANENABLE |
+				BMCR_FULLDPLX;
+		case MII_BMSR:
+			return	BMSR_LSTATUS /* for mii_link_ok() */ |
+				BMSR_ANEGCAPABLE |
+				BMSR_10FULL;
+		case MII_ADVERTISE:
+			/* 80c24 is a "combo card" PHY, right? */
+			return	ADVERTISE_10HALF |
+				ADVERTISE_10FULL;
+		default:
+			DPRINTK(HW, DEBUG,
+		"%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+		dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+			return 0xFFFF;
+		}
+	} else {
+		switch (reg) {
+		default:
+			DPRINTK(HW, DEBUG,
+		"%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+		dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+			return 0xFFFF;
+		}
 	}
-
-	mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data);
+}
+static inline int e100_phy_supports_mii(struct nic *nic)
+{
+	/* for now, just check it by comparing whether we
+	   are using MII software emulation.
+	*/
+	return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated);
 }
 
 static void e100_get_defaults(struct nic *nic)
@@ -1013,7 +1096,8 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 	config->standard_stat_counter = 0x1;	/* 1=standard, 0=extended */
 	config->rx_discard_short_frames = 0x1;	/* 1=discard, 0=pass */
 	config->tx_underrun_retry = 0x3;	/* # of underrun retries */
-	config->mii_mode = 0x1;			/* 1=MII mode, 0=503 mode */
+	if (e100_phy_supports_mii(nic))
+		config->mii_mode = 1;           /* 1=MII mode, 0=i82503 mode */
 	config->pad10 = 0x6;
 	config->no_source_addr_insertion = 0x1;	/* 1=no, 0=yes */
 	config->preamble_length = 0x2;		/* 0=1, 1=3, 2=7, 3=15 bytes */
@@ -1270,6 +1354,42 @@ static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		offsetof(struct mem, dump_buf));
 }
 
+static int e100_phy_check_without_mii(struct nic *nic)
+{
+	u8 phy_type;
+	int without_mii;
+
+	phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+
+	switch (phy_type) {
+	case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
+	case I82503: /* Non-MII PHY; UNTESTED! */
+	case S80C24: /* Non-MII PHY; tested and working */
+		/* paragraph from the FreeBSD driver, "FXP_PHY_80C24":
+		 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
+		 * doesn't have a programming interface of any sort.  The
+		 * media is sensed automatically based on how the link partner
+		 * is configured.  This is, in essence, manual configuration.
+		 */
+		DPRINTK(PROBE, INFO,
+			 "found MII-less i82503 or 80c24 or other PHY\n");
+
+		nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
+		nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
+
+		/* these might be needed for certain MII-less cards...
+		 * nic->flags |= ich;
+		 * nic->flags |= ich_10h_workaround; */
+
+		without_mii = 1;
+		break;
+	default:
+		without_mii = 0;
+		break;
+	}
+	return without_mii;
+}
+
 #define NCONFIG_AUTO_SWITCH	0x0080
 #define MII_NSC_CONG		MII_RESV1
 #define NSC_CONG_ENABLE		0x0100
@@ -1290,9 +1410,21 @@ static int e100_phy_init(struct nic *nic)
 		if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
 			break;
 	}
-	DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
-	if (addr == 32)
-		return -EAGAIN;
+	if (addr == 32) {
+		/* uhoh, no PHY detected: check whether we seem to be some
+		 * weird, rare variant which is *known* to not have any MII.
+		 * But do this AFTER MII checking only, since this does
+		 * lookup of EEPROM values which may easily be unreliable. */
+		if (e100_phy_check_without_mii(nic))
+			return 0; /* simply return and hope for the best */
+		else {
+			/* for unknown cases log a fatal error */
+			DPRINTK(HW, ERR,
+				"Failed to locate any known PHY, aborting.\n");
+			return -EAGAIN;
+		}
+	} else
+		DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
 
 	/* Isolate all the PHY ids */
 	for (addr = 0; addr < 32; addr++)
@@ -1320,6 +1452,9 @@ static int e100_phy_init(struct nic *nic)
 	if (nic->phy == phy_82552_v) {
 		u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
 
+		/* assign special tweaked mdio_ctrl() function */
+		nic->mdio_ctrl = mdio_ctrl_phy_82552_v;
+
 		/* Workaround Si not advertising flow-control during autoneg */
 		advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 		mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert);
@@ -1581,7 +1716,7 @@ static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		/* This is a hard error - log it. */
 		DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
 		netif_stop_queue(netdev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	netdev->trans_start = jiffies;
@@ -2585,6 +2720,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 	nic->netdev = netdev;
 	nic->pdev = pdev;
 	nic->msg_enable = (1 << debug) - 1;
+	nic->mdio_ctrl = mdio_ctrl_hw;
 	pci_set_drvdata(pdev, netdev);
 
 	if ((err = pci_enable_device(pdev))) {
@@ -2785,7 +2921,7 @@ static int e100_resume(struct pci_dev *pdev)
 	/* ack any pending wake events, disable PME */
 	pci_enable_wake(pdev, 0, 0);
 
-	/* disbale reverse auto-negotiation */
+	/* disable reverse auto-negotiation */
 	if (nic->phy == phy_82552_v) {
 		u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
 		                           E100_82552_SMARTSPEED);
@@ -2822,12 +2958,13 @@ static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct nic *nic = netdev_priv(netdev);
 
-	/* Similar to calling e100_down(), but avoids adapter I/O. */
-	e100_close(netdev);
-
-	/* Detach; put netif into a state similar to hotplug unplug. */
-	napi_enable(&nic->napi);
 	netif_device_detach(netdev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	if (netif_running(netdev))
+		e100_down(nic);
 	pci_disable_device(pdev);
 
 	/* Request a slot reset. */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index fffb006b7d9..8d36743c814 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -498,6 +498,8 @@ int e1000_up(struct e1000_adapter *adapter)
 
 	e1000_irq_enable(adapter);
 
+	netif_wake_queue(adapter->netdev);
+
 	/* fire a link change interrupt to start the watchdog */
 	ew32(ICS, E1000_ICS_LSC);
 	return 0;
@@ -1234,15 +1236,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	    !e1000_check_mng_mode(hw))
 		e1000_get_hw_control(adapter);
 
-	/* tell the stack to leave us alone until e1000_open() is called */
-	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
-
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
 
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
 	DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
 
 	cards_found++;
@@ -1441,6 +1442,8 @@ static int e1000_open(struct net_device *netdev)
 	if (test_bit(__E1000_TESTING, &adapter->flags))
 		return -EBUSY;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = e1000_setup_all_tx_resources(adapter);
 	if (err)
@@ -2327,7 +2330,8 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	struct dev_addr_list *uc_ptr;
+	struct netdev_hw_addr *ha;
+	bool use_uc = false;
 	struct dev_addr_list *mc_ptr;
 	u32 rctl;
 	u32 hash_value;
@@ -2366,12 +2370,11 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 			rctl |= E1000_RCTL_VFE;
 	}
 
-	uc_ptr = NULL;
 	if (netdev->uc_count > rar_entries - 1) {
 		rctl |= E1000_RCTL_UPE;
 	} else if (!(netdev->flags & IFF_PROMISC)) {
 		rctl &= ~E1000_RCTL_UPE;
-		uc_ptr = netdev->uc_list;
+		use_uc = true;
 	}
 
 	ew32(RCTL, rctl);
@@ -2389,13 +2392,20 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 	 * if there are not 14 addresses, go ahead and clear the filters
 	 * -- with 82571 controllers only 0-13 entries are filled here
 	 */
+	i = 1;
+	if (use_uc)
+		list_for_each_entry(ha, &netdev->uc_list, list) {
+			if (i == rar_entries)
+				break;
+			e1000_rar_set(hw, ha->addr, i++);
+		}
+
+	WARN_ON(i == rar_entries);
+
 	mc_ptr = netdev->mc_list;
 
-	for (i = 1; i < rar_entries; i++) {
-		if (uc_ptr) {
-			e1000_rar_set(hw, uc_ptr->da_addr, i);
-			uc_ptr = uc_ptr->next;
-		} else if (mc_ptr) {
+	for (; i < rar_entries; i++) {
+		if (mc_ptr) {
 			e1000_rar_set(hw, mc_ptr->da_addr, i);
 			mc_ptr = mc_ptr->next;
 		} else {
@@ -2405,7 +2415,6 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 			E1000_WRITE_FLUSH();
 		}
 	}
-	WARN_ON(uc_ptr != NULL);
 
 	/* load any remaining addresses into the hash table */
 
@@ -2590,7 +2599,6 @@ static void e1000_watchdog(unsigned long data)
 			ew32(TCTL, tctl);
 
 			netif_carrier_on(netdev);
-			netif_wake_queue(netdev);
 			mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
 			adapter->smartspeed = 0;
 		} else {
@@ -2607,7 +2615,6 @@ static void e1000_watchdog(unsigned long data)
 			printk(KERN_INFO "e1000: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_stop_queue(netdev);
 			mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
 
 			/* 80003ES2LAN workaround--
@@ -2645,6 +2652,8 @@ static void e1000_watchdog(unsigned long data)
 			 * (Do the reset outside of interrupt context). */
 			adapter->tx_timeout_count++;
 			schedule_work(&adapter->reset_task);
+			/* return immediately since reset is imminent */
+			return;
 		}
 	}
 
@@ -2989,7 +2998,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			size -= 4;
 
 		buffer_info->length = size;
-		buffer_info->dma = map[0] + offset;
+		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
 
@@ -3030,7 +3039,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 				size -= 4;
 
 			buffer_info->length = size;
-			buffer_info->dma = map[f + 1] + offset;
+			buffer_info->dma = map[f] + offset;
 			buffer_info->time_stamp = jiffies;
 			buffer_info->next_to_watch = i;
 
@@ -3362,7 +3371,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	if (count) {
 		e1000_tx_queue(adapter, tx_ring, tx_flags, count);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
 
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 6c01a2072c8..b53b40ba88a 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -71,6 +71,7 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw);
 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
 static s32 e1000_led_on_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
 
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
@@ -212,6 +213,9 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_mac_info *mac = &hw->mac;
 	struct e1000_mac_operations *func = &mac->ops;
+	u32 swsm = 0;
+	u32 swsm2 = 0;
+	bool force_clear_smbi = false;
 
 	/* Set media type */
 	switch (adapter->pdev->device) {
@@ -276,6 +280,50 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 		break;
 	}
 
+	/*
+	 * Ensure that the inter-port SWSM.SMBI lock bit is clear before
+	 * first NVM or PHY acess. This should be done for single-port
+	 * devices, and for one port only on dual-port devices so that
+	 * for those devices we can still use the SMBI lock to synchronize
+	 * inter-port accesses to the PHY & NVM.
+	 */
+	switch (hw->mac.type) {
+	case e1000_82571:
+	case e1000_82572:
+		swsm2 = er32(SWSM2);
+
+		if (!(swsm2 & E1000_SWSM2_LOCK)) {
+			/* Only do this for the first interface on this card */
+			ew32(SWSM2,
+			    swsm2 | E1000_SWSM2_LOCK);
+			force_clear_smbi = true;
+		} else
+			force_clear_smbi = false;
+		break;
+	default:
+		force_clear_smbi = true;
+		break;
+	}
+
+	if (force_clear_smbi) {
+		/* Make sure SWSM.SMBI is clear */
+		swsm = er32(SWSM);
+		if (swsm & E1000_SWSM_SMBI) {
+			/* This bit should not be set on a first interface, and
+			 * indicates that the bootagent or EFI code has
+			 * improperly left this bit enabled
+			 */
+			hw_dbg(hw, "Please update your 82571 Bootagent\n");
+		}
+		ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
+	}
+
+	/*
+	 * Initialze device specific counter of SMBI acquisition
+	 * timeouts.
+	 */
+	 hw->dev_spec.e82571.smb_counter = 0;
+
 	return 0;
 }
 
@@ -341,8 +389,10 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
 			if (e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1,
 				       &eeprom_data) < 0)
 				break;
-			if (eeprom_data & NVM_WORD1A_ASPM_MASK)
-				adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+			if (!(eeprom_data & NVM_WORD1A_ASPM_MASK)) {
+				adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
+				adapter->max_hw_frame_size = DEFAULT_JUMBO;
+			}
 		}
 		break;
 	default:
@@ -411,11 +461,37 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
 static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 {
 	u32 swsm;
-	s32 timeout = hw->nvm.word_size + 1;
+	s32 sw_timeout = hw->nvm.word_size + 1;
+	s32 fw_timeout = hw->nvm.word_size + 1;
 	s32 i = 0;
 
+	/*
+	 * If we have timedout 3 times on trying to acquire
+	 * the inter-port SMBI semaphore, there is old code
+	 * operating on the other port, and it is not
+	 * releasing SMBI. Modify the number of times that
+	 * we try for the semaphore to interwork with this
+	 * older code.
+	 */
+	if (hw->dev_spec.e82571.smb_counter > 2)
+		sw_timeout = 1;
+
+	/* Get the SW semaphore */
+	while (i < sw_timeout) {
+		swsm = er32(SWSM);
+		if (!(swsm & E1000_SWSM_SMBI))
+			break;
+
+		udelay(50);
+		i++;
+	}
+
+	if (i == sw_timeout) {
+		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		hw->dev_spec.e82571.smb_counter++;
+	}
 	/* Get the FW semaphore. */
-	for (i = 0; i < timeout; i++) {
+	for (i = 0; i < fw_timeout; i++) {
 		swsm = er32(SWSM);
 		ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
 
@@ -426,9 +502,9 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 		udelay(50);
 	}
 
-	if (i == timeout) {
+	if (i == fw_timeout) {
 		/* Release semaphores */
-		e1000e_put_hw_semaphore(hw);
+		e1000_put_hw_semaphore_82571(hw);
 		hw_dbg(hw, "Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
@@ -447,9 +523,7 @@ static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
 	u32 swsm;
 
 	swsm = er32(SWSM);
-
-	swsm &= ~E1000_SWSM_SWESMBI;
-
+	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
 	ew32(SWSM, swsm);
 }
 
@@ -1585,6 +1659,7 @@ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
 static struct e1000_mac_operations e82571_mac_ops = {
 	/* .check_mng_mode: mac type dependent */
 	/* .check_for_link: media type dependent */
+	.id_led_init		= e1000e_id_led_init,
 	.cleanup_led		= e1000e_cleanup_led_generic,
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_82571,
 	.get_bus_info		= e1000e_get_bus_info_pcie,
@@ -1596,6 +1671,7 @@ static struct e1000_mac_operations e82571_mac_ops = {
 	.init_hw		= e1000_init_hw_82571,
 	.setup_link		= e1000_setup_link_82571,
 	/* .setup_physical_interface: media type dependent */
+	.setup_led		= e1000e_setup_led_generic,
 };
 
 static struct e1000_phy_operations e82_phy_ops_igp = {
@@ -1672,6 +1748,7 @@ struct e1000_info e1000_82571_info = {
 				  | FLAG_TARC_SPEED_MODE_BIT /* errata */
 				  | FLAG_APME_CHECK_PORT_B,
 	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_igp,
@@ -1688,6 +1765,7 @@ struct e1000_info e1000_82572_info = {
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_TARC_SPEED_MODE_BIT, /* errata */
 	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_igp,
@@ -1706,6 +1784,7 @@ struct e1000_info e1000_82573_info = {
 				  | FLAG_HAS_ERT
 				  | FLAG_HAS_SWSM_ON_LOAD,
 	.pba			= 20,
+	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_m88,
@@ -1724,6 +1803,7 @@ struct e1000_info e1000_82574_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.pba			= 20,
+	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_bm,
@@ -1740,6 +1820,7 @@ struct e1000_info e1000_82583_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.pba			= 20,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
 	.phy_ops		= &e82_phy_ops_bm,
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 243aa499fe9..8890c97e112 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -56,6 +56,7 @@
 /* Wake Up Control */
 #define E1000_WUC_APME       0x00000001 /* APM Enable */
 #define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
+#define E1000_WUC_PHY_WAKE   0x00000100 /* if PHY supports wakeup */
 
 /* Wake Up Filter Control */
 #define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
@@ -65,6 +66,13 @@
 #define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
 #define E1000_WUFC_ARP  0x00000020 /* ARP Request Packet Wakeup Enable */
 
+/* Wake Up Status */
+#define E1000_WUS_LNKC         E1000_WUFC_LNKC
+#define E1000_WUS_MAG          E1000_WUFC_MAG
+#define E1000_WUS_EX           E1000_WUFC_EX
+#define E1000_WUS_MC           E1000_WUFC_MC
+#define E1000_WUS_BC           E1000_WUFC_BC
+
 /* Extended Device Control */
 #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
 #define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
@@ -77,6 +85,7 @@
 #define E1000_CTRL_EXT_IAME           0x08000000 /* Interrupt acknowledge Auto-mask */
 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000 /* Clear Interrupt timers after IMS clear */
 #define E1000_CTRL_EXT_PBA_CLR        0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_PHYPDEN        0x00100000
 
 /* Receive Descriptor bit definitions */
 #define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
@@ -140,6 +149,7 @@
 #define E1000_RCTL_DTYP_PS        0x00000400    /* Packet Split descriptor */
 #define E1000_RCTL_RDMTS_HALF     0x00000000    /* Rx desc min threshold size */
 #define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */
+#define E1000_RCTL_MO_3           0x00003000    /* multicast offset 15:4 */
 #define E1000_RCTL_BAM            0x00008000    /* broadcast enable */
 /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
 #define E1000_RCTL_SZ_2048        0x00000000    /* Rx buffer size 2048 */
@@ -153,6 +163,7 @@
 #define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */
 #define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */
 #define E1000_RCTL_CFI            0x00100000    /* canonical form indicator */
+#define E1000_RCTL_PMCF           0x00800000    /* pass MAC control frames */
 #define E1000_RCTL_BSEX           0x02000000    /* Buffer size extension */
 #define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */
 
@@ -255,11 +266,16 @@
 #define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX
 
 /* LED Control */
+#define E1000_PHY_LED0_MODE_MASK          0x00000007
+#define E1000_PHY_LED0_IVRT               0x00000008
+#define E1000_PHY_LED0_MASK               0x0000001F
+
 #define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F
 #define E1000_LEDCTL_LED0_MODE_SHIFT      0
 #define E1000_LEDCTL_LED0_IVRT            0x00000040
 #define E1000_LEDCTL_LED0_BLINK           0x00000080
 
+#define E1000_LEDCTL_MODE_LINK_UP       0x2
 #define E1000_LEDCTL_MODE_LED_ON        0xE
 #define E1000_LEDCTL_MODE_LED_OFF       0xF
 
@@ -360,6 +376,8 @@
 #define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */
 #define E1000_SWSM_DRV_LOAD     0x00000008 /* Driver Loaded Bit */
 
+#define E1000_SWSM2_LOCK        0x00000002 /* Secondary driver semaphore bit */
+
 /* Interrupt Cause Read */
 #define E1000_ICR_TXDW          0x00000001 /* Transmit desc written back */
 #define E1000_ICR_LSC           0x00000004 /* Link Status Change */
@@ -469,6 +487,8 @@
 #define AUTO_READ_DONE_TIMEOUT      10
 
 /* Flow Control */
+#define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */
 #define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
 
 /* Transmit Configuration Word */
@@ -674,6 +694,8 @@
 #define IFE_C_E_PHY_ID       0x02A80310
 #define BME1000_E_PHY_ID     0x01410CB0
 #define BME1000_E_PHY_ID_R2  0x01410CB1
+#define I82577_E_PHY_ID      0x01540050
+#define I82578_E_PHY_ID      0x004DD040
 
 /* M88E1000 Specific Registers */
 #define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
@@ -727,6 +749,9 @@
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
 
+#define I82578_EPSCR_DOWNSHIFT_ENABLE          0x0020
+#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK    0x001C
+
 /* BME1000 PHY Specific Control Register */
 #define BME1000_PSCR_ENABLE_DOWNSHIFT   0x0800 /* 1 = enable downshift */
 
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index f37360aa12a..981936c1fb4 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -62,7 +62,7 @@ struct e1000_info;
 	e_printk(KERN_NOTICE, adapter, format, ## arg)
 
 
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
 #define E1000E_INT_MODE_LEGACY		0
 #define E1000E_INT_MODE_MSI		1
 #define E1000E_INT_MODE_MSIX		2
@@ -96,6 +96,51 @@ struct e1000_info;
 /* Number of packet split data buffers (not including the header buffer) */
 #define PS_PAGE_BUFFERS			(MAX_PS_BUFFERS - 1)
 
+#define DEFAULT_JUMBO			9234
+
+/* BM/HV Specific Registers */
+#define BM_PORT_CTRL_PAGE                 769
+
+#define PHY_UPPER_SHIFT                   21
+#define BM_PHY_REG(page, reg) \
+	(((reg) & MAX_PHY_REG_ADDRESS) |\
+	 (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
+	 (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
+
+/* PHY Wakeup Registers and defines */
+#define BM_RCTL         PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC          PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC         PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS          PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i)    (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i)    (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i)    (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i)      (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+
+#define BM_RCTL_UPE           0x0001          /* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE           0x0002          /* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT      3               /* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK       (3 << 3)        /* Multicast Offset Mask */
+#define BM_RCTL_BAM           0x0020          /* Broadcast Accept Mode */
+#define BM_RCTL_PMCF          0x0040          /* Pass MAC Control Frames */
+#define BM_RCTL_RFCE          0x0080          /* Rx Flow Control Enable */
+
+#define HV_SCC_UPPER		PHY_REG(778, 16) /* Single Collision Count */
+#define HV_SCC_LOWER		PHY_REG(778, 17)
+#define HV_ECOL_UPPER		PHY_REG(778, 18) /* Excessive Collision Count */
+#define HV_ECOL_LOWER		PHY_REG(778, 19)
+#define HV_MCC_UPPER		PHY_REG(778, 20) /* Multiple Collision Count */
+#define HV_MCC_LOWER		PHY_REG(778, 21)
+#define HV_LATECOL_UPPER	PHY_REG(778, 23) /* Late Collision Count */
+#define HV_LATECOL_LOWER	PHY_REG(778, 24)
+#define HV_COLC_UPPER		PHY_REG(778, 25) /* Collision Count */
+#define HV_COLC_LOWER		PHY_REG(778, 26)
+#define HV_DC_UPPER		PHY_REG(778, 27) /* Defer Count */
+#define HV_DC_LOWER		PHY_REG(778, 28)
+#define HV_TNCRS_UPPER		PHY_REG(778, 29) /* Transmit with no CRS */
+#define HV_TNCRS_LOWER		PHY_REG(778, 30)
+
 enum e1000_boards {
 	board_82571,
 	board_82572,
@@ -106,6 +151,7 @@ enum e1000_boards {
 	board_ich8lan,
 	board_ich9lan,
 	board_ich10lan,
+	board_pchlan,
 };
 
 struct e1000_queue_stats {
@@ -293,6 +339,7 @@ struct e1000_adapter {
 	u32 eeprom_wol;
 	u32 wol;
 	u32 pba;
+	u32 max_hw_frame_size;
 
 	bool fc_autoneg;
 
@@ -302,6 +349,7 @@ struct e1000_adapter {
 	unsigned int flags2;
 	struct work_struct downshift_task;
 	struct work_struct update_phy_task;
+	struct work_struct led_blink_task;
 };
 
 struct e1000_info {
@@ -309,6 +357,7 @@ struct e1000_info {
 	unsigned int		flags;
 	unsigned int            flags2;
 	u32			pba;
+	u32			max_hw_frame_size;
 	s32			(*get_variants)(struct e1000_adapter *);
 	struct e1000_mac_operations *mac_ops;
 	struct e1000_phy_operations *phy_ops;
@@ -351,6 +400,7 @@ struct e1000_info {
 
 /* CRC Stripping defines */
 #define FLAG2_CRC_STRIPPING               (1 << 0)
+#define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -404,6 +454,7 @@ extern struct e1000_info e1000_82583_info;
 extern struct e1000_info e1000_ich8_info;
 extern struct e1000_info e1000_ich9_info;
 extern struct e1000_info e1000_ich10_info;
+extern struct e1000_info e1000_pch_info;
 extern struct e1000_info e1000_es2_info;
 
 extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
@@ -425,6 +476,7 @@ extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
+extern s32 e1000e_setup_led_generic(struct e1000_hw *hw);
 extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
 extern s32 e1000e_led_on_generic(struct e1000_hw *hw);
 extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
@@ -493,6 +545,15 @@ extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
 extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000e_check_downshift(struct e1000_hw *hw);
+extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
+extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
+extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
+extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
+extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
+extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
 
 static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 {
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 8964838c686..ae5d7368935 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1366,6 +1366,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
 }
 
 static struct e1000_mac_operations es2_mac_ops = {
+	.id_led_init		= e1000e_id_led_init,
 	.check_mng_mode		= e1000e_check_mng_mode_generic,
 	/* check_for_link dependent on media type */
 	.cleanup_led		= e1000e_cleanup_led_generic,
@@ -1379,6 +1380,7 @@ static struct e1000_mac_operations es2_mac_ops = {
 	.init_hw		= e1000_init_hw_80003es2lan,
 	.setup_link		= e1000e_setup_link,
 	/* setup_physical_interface dependent on media type */
+	.setup_led		= e1000e_setup_led_generic,
 };
 
 static struct e1000_phy_operations es2_phy_ops = {
@@ -1422,6 +1424,7 @@ struct e1000_info e1000_es2_info = {
 				  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
 				  | FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
 	.pba			= 38,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_80003es2lan,
 	.mac_ops		= &es2_mac_ops,
 	.phy_ops		= &es2_phy_ops,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 4d25ede8836..1bf4d2a5d34 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -167,6 +167,15 @@ static int e1000_get_settings(struct net_device *netdev,
 
 	ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
 			 hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+	/* MDI-X => 2; MDI =>1; Invalid =>0 */
+	if ((hw->phy.media_type == e1000_media_type_copper) &&
+	    !hw->mac.get_link_status)
+		ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+		                                      ETH_TP_MDI;
+	else
+		ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
 	return 0;
 }
 
@@ -776,6 +785,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	u32 after;
 	u32 i;
 	u32 toggle;
+	u32 mask;
 
 	/*
 	 * The status register is Read Only, so a write should fail.
@@ -788,17 +798,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	case e1000_80003es2lan:
 		toggle = 0x7FFFF3FF;
 		break;
-	case e1000_82573:
-	case e1000_82574:
-	case e1000_82583:
-	case e1000_ich8lan:
-	case e1000_ich9lan:
-	case e1000_ich10lan:
+        default:
 		toggle = 0x7FFFF033;
 		break;
-	default:
-		toggle = 0xFFFFF833;
-		break;
 	}
 
 	before = er32(STATUS);
@@ -844,11 +846,18 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 		REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
 	REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 	REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
+	mask = 0x8003FFFF;
+	switch (mac->type) {
+	case e1000_ich10lan:
+	case e1000_pchlan:
+		mask |= (1 << 18);
+		break;
+	default:
+		break;
+	}
 	for (i = 0; i < mac->rar_entry_count; i++)
 		REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
-				       ((mac->type == e1000_ich10lan) ?
-					   0x8007FFFF : 0x8003FFFF),
-				       0xFFFFFFFF);
+		                       mask, 0xFFFFFFFF);
 
 	for (i = 0; i < mac->mta_reg_count; i++)
 		REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
@@ -1786,15 +1795,22 @@ static int e1000_set_wol(struct net_device *netdev,
 /* bit defines for adapter->led_status */
 #define E1000_LED_ON		0
 
-static void e1000_led_blink_callback(unsigned long data)
+static void e1000e_led_blink_task(struct work_struct *work)
 {
-	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_adapter *adapter = container_of(work,
+	                                struct e1000_adapter, led_blink_task);
 
 	if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
 		adapter->hw.mac.ops.led_off(&adapter->hw);
 	else
 		adapter->hw.mac.ops.led_on(&adapter->hw);
+}
+
+static void e1000_led_blink_callback(unsigned long data)
+{
+	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
 
+	schedule_work(&adapter->led_blink_task);
 	mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
 }
 
@@ -1807,7 +1823,9 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 		data = INT_MAX;
 
 	if ((hw->phy.type == e1000_phy_ife) ||
+	    (hw->mac.type == e1000_pchlan) ||
 	    (hw->mac.type == e1000_82574)) {
+		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 		if (!adapter->blink_timer.function) {
 			init_timer(&adapter->blink_timer);
 			adapter->blink_timer.function =
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index d8b82296f41..163c1c0cfee 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -193,7 +193,11 @@ enum e1e_registers {
 	E1000_RXCSUM   = 0x05000, /* Rx Checksum Control - RW */
 	E1000_RFCTL    = 0x05008, /* Receive Filter Control */
 	E1000_MTA      = 0x05200, /* Multicast Table Array - RW Array */
-	E1000_RA       = 0x05400, /* Receive Address - RW Array */
+	E1000_RAL_BASE = 0x05400, /* Receive Address Low - RW */
+#define E1000_RAL(_n)   (E1000_RAL_BASE + ((_n) * 8))
+#define E1000_RA        (E1000_RAL(0))
+	E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */
+#define E1000_RAH(_n)   (E1000_RAH_BASE + ((_n) * 8))
 	E1000_VFTA     = 0x05600, /* VLAN Filter Table Array - RW Array */
 	E1000_WUC      = 0x05800, /* Wakeup Control - RW */
 	E1000_WUFC     = 0x05808, /* Wakeup Filter Control - RW */
@@ -210,6 +214,7 @@ enum e1e_registers {
 	E1000_FACTPS    = 0x05B30, /* Function Active and Power State to MNG */
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
+	E1000_SWSM2     = 0x05B58, /* Driver-only SW semaphore */
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
@@ -253,7 +258,7 @@ enum e1e_registers {
 #define IGP01E1000_PLHR_SS_DOWNGRADE	0x8000
 
 #define IGP01E1000_PSSR_POLARITY_REVERSED	0x0002
-#define IGP01E1000_PSSR_MDIX			0x0008
+#define IGP01E1000_PSSR_MDIX			0x0800
 #define IGP01E1000_PSSR_SPEED_MASK		0xC000
 #define IGP01E1000_PSSR_SPEED_1000MBPS		0xC000
 
@@ -368,6 +373,10 @@ enum e1e_registers {
 #define E1000_DEV_ID_ICH10_R_BM_V		0x10CE
 #define E1000_DEV_ID_ICH10_D_BM_LM		0x10DE
 #define E1000_DEV_ID_ICH10_D_BM_LF		0x10DF
+#define E1000_DEV_ID_PCH_M_HV_LM		0x10EA
+#define E1000_DEV_ID_PCH_M_HV_LC		0x10EB
+#define E1000_DEV_ID_PCH_D_HV_DM		0x10EF
+#define E1000_DEV_ID_PCH_D_HV_DC		0x10F0
 
 #define E1000_REVISION_4 4
 
@@ -383,6 +392,7 @@ enum e1000_mac_type {
 	e1000_ich8lan,
 	e1000_ich9lan,
 	e1000_ich10lan,
+	e1000_pchlan,
 };
 
 enum e1000_media_type {
@@ -417,6 +427,8 @@ enum e1000_phy_type {
 	e1000_phy_igp_3,
 	e1000_phy_ife,
 	e1000_phy_bm,
+	e1000_phy_82578,
+	e1000_phy_82577,
 };
 
 enum e1000_bus_width {
@@ -720,6 +732,7 @@ struct e1000_host_mng_command_info {
 
 /* Function pointers and static data for the MAC. */
 struct e1000_mac_operations {
+	s32  (*id_led_init)(struct e1000_hw *);
 	bool (*check_mng_mode)(struct e1000_hw *);
 	s32  (*check_for_link)(struct e1000_hw *);
 	s32  (*cleanup_led)(struct e1000_hw *);
@@ -733,11 +746,13 @@ struct e1000_mac_operations {
 	s32  (*init_hw)(struct e1000_hw *);
 	s32  (*setup_link)(struct e1000_hw *);
 	s32  (*setup_physical_interface)(struct e1000_hw *);
+	s32  (*setup_led)(struct e1000_hw *);
 };
 
 /* Function pointers for the PHY. */
 struct e1000_phy_operations {
 	s32  (*acquire_phy)(struct e1000_hw *);
+	s32  (*check_polarity)(struct e1000_hw *);
 	s32  (*check_reset_block)(struct e1000_hw *);
 	s32  (*commit_phy)(struct e1000_hw *);
 	s32  (*force_speed_duplex)(struct e1000_hw *);
@@ -869,6 +884,7 @@ struct e1000_fc_info {
 struct e1000_dev_spec_82571 {
 	bool laa_is_present;
 	bool alt_mac_addr_is_present;
+	u32 smb_counter;
 };
 
 struct e1000_shadow_ram {
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 6d1aab6316b..9e23f50fb9c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -48,6 +48,10 @@
  * 82567LF-3 Gigabit Network Connection
  * 82567LM-3 Gigabit Network Connection
  * 82567LM-4 Gigabit Network Connection
+ * 82577LM Gigabit Network Connection
+ * 82577LC Gigabit Network Connection
+ * 82578DM Gigabit Network Connection
+ * 82578DC Gigabit Network Connection
  */
 
 #include <linux/netdevice.h>
@@ -116,6 +120,8 @@
 #define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
 #define IGP3_VR_CTRL_MODE_SHUTDOWN	0x0200
 
+#define HV_LED_CONFIG		PHY_REG(768, 30) /* LED Configuration */
+
 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
 union ich8_hws_flash_status {
@@ -186,6 +192,14 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
 static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
 static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -213,6 +227,41 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
 #define ew32flash(reg,val)	__ew32flash(hw, (reg), (val))
 
 /**
+ *  e1000_init_phy_params_pchlan - Initialize PHY function pointers
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+
+	phy->addr                     = 1;
+	phy->reset_delay_us           = 100;
+
+	phy->ops.check_polarity       = e1000_check_polarity_ife_ich8lan;
+	phy->ops.read_phy_reg         = e1000_read_phy_reg_hv;
+	phy->ops.write_phy_reg        = e1000_write_phy_reg_hv;
+	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+	phy->id = e1000_phy_unknown;
+	e1000e_get_phy_id(hw);
+	phy->type = e1000e_get_phy_type_from_id(phy->id);
+
+	if (phy->type == e1000_phy_82577) {
+		phy->ops.check_polarity = e1000_check_polarity_82577;
+		phy->ops.force_speed_duplex =
+			e1000_phy_force_speed_duplex_82577;
+		phy->ops.get_cable_length   = e1000_get_cable_length_82577;
+		phy->ops.get_phy_info = e1000_get_phy_info_82577;
+		phy->ops.commit_phy = e1000e_phy_sw_reset;
+	}
+
+	return ret_val;
+}
+
+/**
  *  e1000_init_phy_params_ich8lan - Initialize PHY function pointers
  *  @hw: pointer to the HW structure
  *
@@ -273,6 +322,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 		break;
 	}
 
+	phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan;
+
 	return 0;
 }
 
@@ -358,6 +409,36 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	/* Set if manageability features are enabled. */
 	mac->arc_subsystem_valid = 1;
 
+	/* LED operations */
+	switch (mac->type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+		/* ID LED init */
+		mac->ops.id_led_init = e1000e_id_led_init;
+		/* setup LED */
+		mac->ops.setup_led = e1000e_setup_led_generic;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_ich8lan;
+		mac->ops.led_off = e1000_led_off_ich8lan;
+		break;
+	case e1000_pchlan:
+		/* ID LED init */
+		mac->ops.id_led_init = e1000_id_led_init_pchlan;
+		/* setup LED */
+		mac->ops.setup_led = e1000_setup_led_pchlan;
+		/* cleanup LED */
+		mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
+		/* turn on/off LED */
+		mac->ops.led_on = e1000_led_on_pchlan;
+		mac->ops.led_off = e1000_led_off_pchlan;
+		break;
+	default:
+		break;
+	}
+
 	/* Enable PCS Lock-loss workaround for ICH8 */
 	if (mac->type == e1000_ich8lan)
 		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1);
@@ -378,10 +459,18 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	if (rc)
 		return rc;
 
-	rc = e1000_init_phy_params_ich8lan(hw);
+	if (hw->mac.type == e1000_pchlan)
+		rc = e1000_init_phy_params_pchlan(hw);
+	else
+		rc = e1000_init_phy_params_ich8lan(hw);
 	if (rc)
 		return rc;
 
+	if (adapter->hw.phy.type == e1000_phy_ife) {
+		adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+		adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+	}
+
 	if ((adapter->hw.mac.type == e1000_ich8lan) &&
 	    (adapter->hw.phy.type == e1000_phy_igp_3))
 		adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
@@ -410,12 +499,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
 	while (timeout) {
 		extcnf_ctrl = er32(EXTCNF_CTRL);
-		extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
-		ew32(EXTCNF_CTRL, extcnf_ctrl);
 
-		extcnf_ctrl = er32(EXTCNF_CTRL);
-		if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
-			break;
+		if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) {
+			extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+			ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+			extcnf_ctrl = er32(EXTCNF_CTRL);
+			if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+				break;
+		}
 		mdelay(1);
 		timeout--;
 	}
@@ -555,6 +647,53 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ *  done after every PHY reset.
+ **/
+static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	if (hw->mac.type != e1000_pchlan)
+		return ret_val;
+
+	if (((hw->phy.type == e1000_phy_82577) &&
+	     ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
+	    ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
+		/* Disable generation of early preamble */
+		ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431);
+		if (ret_val)
+			return ret_val;
+
+		/* Preamble tuning for SSC */
+		ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
+		if (ret_val)
+			return ret_val;
+	}
+
+	if (hw->phy.type == e1000_phy_82578) {
+		/*
+		 * Return registers to default by doing a soft reset then
+		 * writing 0x3140 to the control register.
+		 */
+		if (hw->phy.revision < 2) {
+			e1000e_phy_sw_reset(hw);
+			ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140);
+		}
+	}
+
+	/* Select page 0 */
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		return ret_val;
+	hw->phy.addr = 1;
+	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+	hw->phy.ops.release_phy(hw);
+
+	return ret_val;
+}
+
+/**
  *  e1000_phy_hw_reset_ich8lan - Performs a PHY reset
  *  @hw: pointer to the HW structure
  *
@@ -575,6 +714,12 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/*
 	 * Initialize the PHY from the NVM on ICH platforms.  This
 	 * is needed due to an issue where the NVM configuration is
@@ -701,7 +846,7 @@ static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
 	phy->polarity_correction = (!(data & IFE_PSC_AUTO_POLARITY_DISABLE));
 
 	if (phy->polarity_correction) {
-		ret_val = e1000_check_polarity_ife_ich8lan(hw);
+		ret_val = phy->ops.check_polarity(hw);
 		if (ret_val)
 			return ret_val;
 	} else {
@@ -741,6 +886,8 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
 		break;
 	case e1000_phy_igp_3:
 	case e1000_phy_bm:
+	case e1000_phy_82578:
+	case e1000_phy_82577:
 		return e1000e_get_phy_info_igp(hw);
 		break;
 	default:
@@ -1852,6 +1999,79 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
 }
 
 /**
+ *  e1000_id_led_init_pchlan - store LED configurations
+ *  @hw: pointer to the HW structure
+ *
+ *  PCH does not control LEDs via the LEDCTL register, rather it uses
+ *  the PHY LED configuration register.
+ *
+ *  PCH also does not have an "always on" or "always off" mode which
+ *  complicates the ID feature.  Instead of using the "on" mode to indicate
+ *  in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()),
+ *  use "link_up" mode.  The LEDs will still ID on request if there is no
+ *  link based on logic in e1000_led_[on|off]_pchlan().
+ **/
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP;
+	const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT;
+	u16 data, i, temp, shift;
+
+	/* Get default ID LED modes */
+	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+	if (ret_val)
+		goto out;
+
+	mac->ledctl_default = er32(LEDCTL);
+	mac->ledctl_mode1 = mac->ledctl_default;
+	mac->ledctl_mode2 = mac->ledctl_default;
+
+	for (i = 0; i < 4; i++) {
+		temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK;
+		shift = (i * 5);
+		switch (temp) {
+		case ID_LED_ON1_DEF2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_ON1_OFF2:
+			mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode1 |= (ledctl_on << shift);
+			break;
+		case ID_LED_OFF1_DEF2:
+		case ID_LED_OFF1_ON2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode1 |= (ledctl_off << shift);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+		switch (temp) {
+		case ID_LED_DEF1_ON2:
+		case ID_LED_ON1_ON2:
+		case ID_LED_OFF1_ON2:
+			mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode2 |= (ledctl_on << shift);
+			break;
+		case ID_LED_DEF1_OFF2:
+		case ID_LED_ON1_OFF2:
+		case ID_LED_OFF1_OFF2:
+			mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+			mac->ledctl_mode2 |= (ledctl_off << shift);
+			break;
+		default:
+			/* Do nothing */
+			break;
+		}
+	}
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000_get_bus_info_ich8lan - Get/Set the bus type and width
  *  @hw: pointer to the HW structure
  *
@@ -1960,6 +2180,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	kab |= E1000_KABGTXD_BGSQLBIAS;
 	ew32(KABGTXD, kab);
 
+	if (hw->mac.type == e1000_pchlan)
+		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+
 	return ret_val;
 }
 
@@ -1985,7 +2208,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	e1000_initialize_hw_bits_ich8lan(hw);
 
 	/* Initialize identification LED */
-	ret_val = e1000e_id_led_init(hw);
+	ret_val = mac->ops.id_led_init(hw);
 	if (ret_val) {
 		hw_dbg(hw, "Error initializing identification LED\n");
 		return ret_val;
@@ -2031,6 +2254,16 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	ew32(CTRL_EXT, ctrl_ext);
 
 	/*
+	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
+	 * the ME.  Reading the BM_WUC register will clear the host wakeup bit.
+	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
+	 */
+	if (hw->phy.type == e1000_phy_82578) {
+		e1e_rphy(hw, BM_WUC, &i);
+		e1000e_phy_hw_reset_generic(hw);
+	}
+
+	/*
 	 * Clear all of the statistics registers (clear on read).  It is
 	 * important that we do this after we have tried to establish link
 	 * because the symbol error count will increment wildly if there
@@ -2054,6 +2287,9 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
 	/* Extended Device Control */
 	reg = er32(CTRL_EXT);
 	reg |= (1 << 22);
+	/* Enable PHY low-power state when MAC is at D3 w/o WoL */
+	if (hw->mac.type >= e1000_pchlan)
+		reg |= E1000_CTRL_EXT_PHYPDEN;
 	ew32(CTRL_EXT, reg);
 
 	/* Transmit Descriptor Control 0 */
@@ -2112,8 +2348,13 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 	 * the default flow control setting, so we explicitly
 	 * set it to full.
 	 */
-	if (hw->fc.requested_mode == e1000_fc_default)
-		hw->fc.requested_mode = e1000_fc_full;
+	if (hw->fc.requested_mode == e1000_fc_default) {
+		/* Workaround h/w hang when Tx flow control enabled */
+		if (hw->mac.type == e1000_pchlan)
+			hw->fc.requested_mode = e1000_fc_rx_pause;
+		else
+			hw->fc.requested_mode = e1000_fc_full;
+	}
 
 	/*
 	 * Save off the requested flow control mode for use later.  Depending
@@ -2130,6 +2371,14 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 		return ret_val;
 
 	ew32(FCTTV, hw->fc.pause_time);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		ret_val = hw->phy.ops.write_phy_reg(hw,
+		                             PHY_REG(BM_PORT_CTRL_PAGE, 27),
+		                             hw->fc.pause_time);
+		if (ret_val)
+			return ret_val;
+	}
 
 	return e1000e_set_fc_watermarks(hw);
 }
@@ -2169,18 +2418,26 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	if (hw->phy.type == e1000_phy_igp_3) {
+	switch (hw->phy.type) {
+	case e1000_phy_igp_3:
 		ret_val = e1000e_copper_link_setup_igp(hw);
 		if (ret_val)
 			return ret_val;
-	} else if (hw->phy.type == e1000_phy_bm) {
+		break;
+	case e1000_phy_bm:
+	case e1000_phy_82578:
 		ret_val = e1000e_copper_link_setup_m88(hw);
 		if (ret_val)
 			return ret_val;
-	}
-
-	if (hw->phy.type == e1000_phy_ife) {
-		ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
+		break;
+	case e1000_phy_82577:
+		ret_val = e1000_copper_link_setup_82577(hw);
+		if (ret_val)
+			return ret_val;
+		break;
+	case e1000_phy_ife:
+		ret_val = hw->phy.ops.read_phy_reg(hw, IFE_PHY_MDIX_CONTROL,
+		                               &reg_data);
 		if (ret_val)
 			return ret_val;
 
@@ -2198,9 +2455,13 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 			reg_data |= IFE_PMC_AUTO_MDIX;
 			break;
 		}
-		ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
+		ret_val = hw->phy.ops.write_phy_reg(hw, IFE_PHY_MDIX_CONTROL,
+		                                reg_data);
 		if (ret_val)
 			return ret_val;
+		break;
+	default:
+		break;
 	}
 	return e1000e_setup_copper_link(hw);
 }
@@ -2417,18 +2678,26 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
  *  'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
  *  to a lower speed.
  *
- *  Should only be called for ICH9 and ICH10 devices.
+ *  Should only be called for applicable parts.
  **/
 void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
 {
 	u32 phy_ctrl;
 
-	if ((hw->mac.type == e1000_ich10lan) ||
-	    (hw->mac.type == e1000_ich9lan)) {
+	switch (hw->mac.type) {
+	case e1000_ich9lan:
+	case e1000_ich10lan:
+	case e1000_pchlan:
 		phy_ctrl = er32(PHY_CTRL);
 		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
 		            E1000_PHY_CTRL_GBE_DISABLE;
 		ew32(PHY_CTRL, phy_ctrl);
+
+		/* Workaround SWFLAG unexpectedly set during S0->Sx */
+		if (hw->mac.type == e1000_pchlan)
+			udelay(500);
+	default:
+		break;
 	}
 
 	return;
@@ -2482,13 +2751,99 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_setup_led_pchlan - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use.
+ **/
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
+{
+	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG,
+					(u16)hw->mac.ledctl_mode1);
+}
+
+/**
+ *  e1000_cleanup_led_pchlan - Restore the default LED operation
+ *  @hw: pointer to the HW structure
+ *
+ *  Return the LED back to the default configuration.
+ **/
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
+{
+	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG,
+					(u16)hw->mac.ledctl_default);
+}
+
+/**
+ *  e1000_led_on_pchlan - Turn LEDs on
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn on the LEDs.
+ **/
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
+{
+	u16 data = (u16)hw->mac.ledctl_mode2;
+	u32 i, led;
+
+	/*
+	 * If no link, then turn LED on by setting the invert bit
+	 * for each LED that's mode is "link_up" in ledctl_mode2.
+	 */
+	if (!(er32(STATUS) & E1000_STATUS_LU)) {
+		for (i = 0; i < 3; i++) {
+			led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+			if ((led & E1000_PHY_LED0_MODE_MASK) !=
+			    E1000_LEDCTL_MODE_LINK_UP)
+				continue;
+			if (led & E1000_PHY_LED0_IVRT)
+				data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+			else
+				data |= (E1000_PHY_LED0_IVRT << (i * 5));
+		}
+	}
+
+	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data);
+}
+
+/**
+ *  e1000_led_off_pchlan - Turn LEDs off
+ *  @hw: pointer to the HW structure
+ *
+ *  Turn off the LEDs.
+ **/
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
+{
+	u16 data = (u16)hw->mac.ledctl_mode1;
+	u32 i, led;
+
+	/*
+	 * If no link, then turn LED off by clearing the invert bit
+	 * for each LED that's mode is "link_up" in ledctl_mode1.
+	 */
+	if (!(er32(STATUS) & E1000_STATUS_LU)) {
+		for (i = 0; i < 3; i++) {
+			led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+			if ((led & E1000_PHY_LED0_MODE_MASK) !=
+			    E1000_LEDCTL_MODE_LINK_UP)
+				continue;
+			if (led & E1000_PHY_LED0_IVRT)
+				data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+			else
+				data |= (E1000_PHY_LED0_IVRT << (i * 5));
+		}
+	}
+
+	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data);
+}
+
+/**
  *  e1000_get_cfg_done_ich8lan - Read config done bit
  *  @hw: pointer to the HW structure
  *
  *  Read the management control register for the config done bit for
  *  completion status.  NOTE: silicon which is EEPROM-less will fail trying
  *  to read the config done bit, so an error is *ONLY* logged and returns
- *  E1000_SUCCESS.  If we were to return with error, EEPROM-less silicon
+ *  0.  If we were to return with error, EEPROM-less silicon
  *  would not be able to be reset or change link.
  **/
 static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
@@ -2498,7 +2853,8 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 	e1000e_get_cfg_done(hw);
 
 	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
-	if (hw->mac.type != e1000_ich10lan) {
+	if ((hw->mac.type != e1000_ich10lan) &&
+	    (hw->mac.type != e1000_pchlan)) {
 		if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
 		    (hw->phy.type == e1000_phy_igp_3)) {
 			e1000e_phy_init_script_igp3(hw);
@@ -2524,6 +2880,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 {
 	u32 temp;
+	u16 phy_data;
 
 	e1000e_clear_hw_cntrs_base(hw);
 
@@ -2541,22 +2898,42 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 	temp = er32(IAC);
 	temp = er32(ICRXOC);
 
+	/* Clear PHY statistics registers */
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		hw->phy.ops.read_phy_reg(hw, HV_SCC_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_SCC_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_ECOL_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_ECOL_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_MCC_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_MCC_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_LATECOL_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_LATECOL_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_COLC_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_COLC_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_DC_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_DC_LOWER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_TNCRS_UPPER, &phy_data);
+		hw->phy.ops.read_phy_reg(hw, HV_TNCRS_LOWER, &phy_data);
+	}
 }
 
 static struct e1000_mac_operations ich8_mac_ops = {
+	.id_led_init		= e1000e_id_led_init,
 	.check_mng_mode		= e1000_check_mng_mode_ich8lan,
 	.check_for_link		= e1000e_check_for_copper_link,
-	.cleanup_led		= e1000_cleanup_led_ich8lan,
+	/* cleanup_led dependent on mac type */
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
 	.get_bus_info		= e1000_get_bus_info_ich8lan,
 	.get_link_up_info	= e1000_get_link_up_info_ich8lan,
-	.led_on			= e1000_led_on_ich8lan,
-	.led_off		= e1000_led_off_ich8lan,
+	/* led_on dependent on mac type */
+	/* led_off dependent on mac type */
 	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
 	.reset_hw		= e1000_reset_hw_ich8lan,
 	.init_hw		= e1000_init_hw_ich8lan,
 	.setup_link		= e1000_setup_link_ich8lan,
 	.setup_physical_interface= e1000_setup_copper_link_ich8lan,
+	/* id_led_init dependent on mac type */
 };
 
 static struct e1000_phy_operations ich8_phy_ops = {
@@ -2595,6 +2972,7 @@ struct e1000_info e1000_ich8_info = {
 				  | FLAG_HAS_FLASH
 				  | FLAG_APME_IN_WUC,
 	.pba			= 8,
+	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_ich8lan,
 	.mac_ops		= &ich8_mac_ops,
 	.phy_ops		= &ich8_phy_ops,
@@ -2613,6 +2991,7 @@ struct e1000_info e1000_ich9_info = {
 				  | FLAG_HAS_FLASH
 				  | FLAG_APME_IN_WUC,
 	.pba			= 10,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_ich8lan,
 	.mac_ops		= &ich8_mac_ops,
 	.phy_ops		= &ich8_phy_ops,
@@ -2631,6 +3010,25 @@ struct e1000_info e1000_ich10_info = {
 				  | FLAG_HAS_FLASH
 				  | FLAG_APME_IN_WUC,
 	.pba			= 10,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
+
+struct e1000_info e1000_pch_info = {
+	.mac			= e1000_pchlan,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_RX_CSUM_ENABLED
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.pba			= 26,
+	.max_hw_frame_size	= 4096,
 	.get_variants		= e1000_get_variants_ich8lan,
 	.mac_ops		= &ich8_mac_ops,
 	.phy_ops		= &ich8_phy_ops,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 18a4f5902f3..be6d9e99037 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,6 +378,12 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 
 	mac->get_link_status = 0;
 
+	if (hw->phy.type == e1000_phy_82578) {
+		ret_val = e1000_link_stall_workaround_hv(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/*
 	 * Check if there was DownShift, must be checked
 	 * immediately after link-up
@@ -1406,6 +1412,38 @@ s32 e1000e_id_led_init(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000e_setup_led_generic - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use and saves the current state
+ *  of the LED so it can be later restored.
+ **/
+s32 e1000e_setup_led_generic(struct e1000_hw *hw)
+{
+	u32 ledctl;
+
+	if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
+		return -E1000_ERR_CONFIG;
+	}
+
+	if (hw->phy.media_type == e1000_media_type_fiber) {
+		ledctl = er32(LEDCTL);
+		hw->mac.ledctl_default = ledctl;
+		/* Turn off LED0 */
+		ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+		            E1000_LEDCTL_LED0_BLINK |
+		            E1000_LEDCTL_LED0_MODE_MASK);
+		ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+		           E1000_LEDCTL_LED0_MODE_SHIFT);
+		ew32(LEDCTL, ledctl);
+	} else if (hw->phy.media_type == e1000_media_type_copper) {
+		ew32(LEDCTL, hw->mac.ledctl_mode1);
+	}
+
+	return 0;
+}
+
+/**
  *  e1000e_cleanup_led_generic - Set LED config to default operation
  *  @hw: pointer to the HW structure
  *
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ca82f19a7ed..677f60490f6 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -48,7 +48,7 @@
 
 #include "e1000.h"
 
-#define DRV_VERSION "0.3.3.4-k4"
+#define DRV_VERSION "1.0.2-k2"
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -62,6 +62,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
 	[board_ich8lan]		= &e1000_ich8_info,
 	[board_ich9lan]		= &e1000_ich9_info,
 	[board_ich10lan]	= &e1000_ich10_info,
+	[board_pchlan]		= &e1000_pch_info,
 };
 
 #ifdef DEBUG
@@ -2255,8 +2256,6 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 		ew32(TARC(1), tarc);
 	}
 
-	e1000e_config_collision_dist(hw);
-
 	/* Setup Transmit Descriptor Settings for eop descriptor */
 	adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
 
@@ -2269,6 +2268,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 
 	ew32(TCTL, tctl);
 
+	e1000e_config_collision_dist(hw);
+
 	adapter->tx_queue_len = adapter->netdev->tx_queue_len;
 }
 
@@ -2308,6 +2309,23 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	if (adapter->flags2 & FLAG2_CRC_STRIPPING)
 		rctl |= E1000_RCTL_SECRC;
 
+	/* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
+	if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
+		u16 phy_data;
+
+		e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
+		phy_data &= 0xfff8;
+		phy_data |= (1 << 2);
+		e1e_wphy(hw, PHY_REG(770, 26), phy_data);
+
+		e1e_rphy(hw, 22, &phy_data);
+		phy_data &= 0x0fff;
+		phy_data |= (1 << 14);
+		e1e_wphy(hw, 0x10, 0x2823);
+		e1e_wphy(hw, 0x11, 0x0003);
+		e1e_wphy(hw, 22, phy_data);
+	}
+
 	/* Setup buffer sizes */
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
@@ -2751,23 +2769,25 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	/*
 	 * flow control settings
 	 *
-	 * The high water mark must be low enough to fit one full frame
+	 * The high water mark must be low enough to fit two full frame
 	 * (or the size used for early receive) above it in the Rx FIFO.
 	 * Set it to the lower of:
 	 * - 90% of the Rx FIFO size, and
 	 * - the full Rx FIFO size minus the early receive size (for parts
 	 *   with ERT support assuming ERT set to E1000_ERT_2048), or
-	 * - the full Rx FIFO size minus one full frame
+	 * - the full Rx FIFO size minus two full frames
 	 */
-	if (adapter->flags & FLAG_HAS_ERT)
+	if ((adapter->flags & FLAG_HAS_ERT) &&
+	    (adapter->netdev->mtu > ETH_DATA_LEN))
 		hwm = min(((pba << 10) * 9 / 10),
 			  ((pba << 10) - (E1000_ERT_2048 << 3)));
 	else
 		hwm = min(((pba << 10) * 9 / 10),
-			  ((pba << 10) - adapter->max_frame_size));
+			  ((pba << 10) - (2 * adapter->max_frame_size)));
 
-	fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
-	fc->low_water = fc->high_water - 8;
+	fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+	fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
+	fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
 
 	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
 		fc->pause_time = 0xFFFF;
@@ -2787,6 +2807,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		e1000_get_hw_control(adapter);
 
 	ew32(WUC, 0);
+	if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)
+		e1e_wphy(&adapter->hw, BM_WUC, 0);
 
 	if (mac->ops.init_hw(hw))
 		e_err("Hardware Error\n");
@@ -2799,7 +2821,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	e1000e_reset_adaptive(hw);
 	e1000_get_phy_info(hw);
 
-	if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) {
+	if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
+	    !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
 		u16 phy_data = 0;
 		/*
 		 * speed up time to link by disabling smart power down, ignore
@@ -2826,6 +2849,8 @@ int e1000e_up(struct e1000_adapter *adapter)
 		e1000_configure_msix(adapter);
 	e1000_irq_enable(adapter);
 
+	netif_wake_queue(adapter->netdev);
+
 	/* fire a link change interrupt to start the watchdog */
 	ew32(ICS, E1000_ICS_LSC);
 	return 0;
@@ -2848,7 +2873,7 @@ void e1000e_down(struct e1000_adapter *adapter)
 	ew32(RCTL, rctl & ~E1000_RCTL_EN);
 	/* flush and sleep below */
 
-	netif_tx_stop_all_queues(netdev);
+	netif_stop_queue(netdev);
 
 	/* disable transmits in the hardware */
 	tctl = er32(TCTL);
@@ -3072,6 +3097,8 @@ static int e1000_open(struct net_device *netdev)
 	if (test_bit(__E1000_TESTING, &adapter->state))
 		return -EBUSY;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = e1000e_setup_tx_resources(adapter);
 	if (err)
@@ -3128,7 +3155,7 @@ static int e1000_open(struct net_device *netdev)
 
 	e1000_irq_enable(adapter);
 
-	netif_tx_start_all_queues(netdev);
+	netif_start_queue(netdev);
 
 	/* fire a link status change interrupt to start the watchdog */
 	ew32(ICS, E1000_ICS_LSC);
@@ -3262,6 +3289,7 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
+	u16 phy_data;
 
 	/*
 	 * Prevent stats update while adapter is being reset, or if the pci
@@ -3281,11 +3309,34 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.roc += er32(ROC);
 
 	adapter->stats.mpc += er32(MPC);
-	adapter->stats.scc += er32(SCC);
-	adapter->stats.ecol += er32(ECOL);
-	adapter->stats.mcc += er32(MCC);
-	adapter->stats.latecol += er32(LATECOL);
-	adapter->stats.dc += er32(DC);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
+		adapter->stats.scc += phy_data;
+
+		e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
+		e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
+		adapter->stats.ecol += phy_data;
+
+		e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
+		adapter->stats.mcc += phy_data;
+
+		e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
+		e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
+		adapter->stats.latecol += phy_data;
+
+		e1e_rphy(hw, HV_DC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_DC_LOWER, &phy_data);
+		adapter->stats.dc += phy_data;
+	} else {
+		adapter->stats.scc += er32(SCC);
+		adapter->stats.ecol += er32(ECOL);
+		adapter->stats.mcc += er32(MCC);
+		adapter->stats.latecol += er32(LATECOL);
+		adapter->stats.dc += er32(DC);
+	}
 	adapter->stats.xonrxc += er32(XONRXC);
 	adapter->stats.xontxc += er32(XONTXC);
 	adapter->stats.xoffrxc += er32(XOFFRXC);
@@ -3303,13 +3354,28 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 
 	hw->mac.tx_packet_delta = er32(TPT);
 	adapter->stats.tpt += hw->mac.tx_packet_delta;
-	hw->mac.collision_delta = er32(COLC);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
+		e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
+		hw->mac.collision_delta = phy_data;
+	} else {
+		hw->mac.collision_delta = er32(COLC);
+	}
 	adapter->stats.colc += hw->mac.collision_delta;
 
 	adapter->stats.algnerrc += er32(ALGNERRC);
 	adapter->stats.rxerrc += er32(RXERRC);
-	if ((hw->mac.type != e1000_82574) && (hw->mac.type != e1000_82583))
-		adapter->stats.tncrs += er32(TNCRS);
+	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82577)) {
+		e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
+		e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
+		adapter->stats.tncrs += phy_data;
+	} else {
+		if ((hw->mac.type != e1000_82574) &&
+		    (hw->mac.type != e1000_82583))
+			adapter->stats.tncrs += er32(TNCRS);
+	}
 	adapter->stats.cexterr += er32(CEXTERR);
 	adapter->stats.tsctc += er32(TSCTC);
 	adapter->stats.tsctfc += er32(TSCTFC);
@@ -3598,7 +3664,6 @@ static void e1000_watchdog_task(struct work_struct *work)
 				phy->ops.cfg_on_link_up(hw);
 
 			netif_carrier_on(netdev);
-			netif_tx_wake_all_queues(netdev);
 
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
@@ -3612,7 +3677,6 @@ static void e1000_watchdog_task(struct work_struct *work)
 			printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
 			       adapter->netdev->name);
 			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
 					  round_jiffies(jiffies + 2 * HZ));
@@ -3649,6 +3713,8 @@ link_up:
 			 */
 			adapter->tx_timeout_count++;
 			schedule_work(&adapter->reset_task);
+			/* return immediately since reset is imminent */
+			return;
 		}
 	}
 
@@ -3850,7 +3916,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 		buffer_info->length = size;
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
-		buffer_info->dma = map[0] + offset;
+		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 		count++;
 
 		len -= size;
@@ -3881,7 +3947,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
 			buffer_info->next_to_watch = i;
-			buffer_info->dma = map[f + 1] + offset;
+			buffer_info->dma = map[f] + offset;
 
 			len -= size;
 			offset += size;
@@ -4145,7 +4211,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
 	if (count) {
 		e1000_tx_queue(adapter, tx_flags, count);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
 
@@ -4206,27 +4271,17 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 
-	if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
-	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		e_err("Invalid MTU setting\n");
+	/* Jumbo frame support */
+	if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+	    !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+		e_err("Jumbo Frames not supported.\n");
 		return -EINVAL;
 	}
 
-	/* Jumbo frame size limits */
-	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
-		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			e_err("Jumbo Frames not supported.\n");
-			return -EINVAL;
-		}
-		if (adapter->hw.phy.type == e1000_phy_ife) {
-			e_err("Jumbo Frames not supported.\n");
-			return -EINVAL;
-		}
-	}
-
-#define MAX_STD_JUMBO_FRAME_SIZE 9234
-	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-		e_err("MTU > 9216 not supported.\n");
+	/* Supported frame sizes */
+	if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
+	    (max_frame > adapter->max_hw_frame_size)) {
+		e_err("Unsupported MTU setting\n");
 		return -EINVAL;
 	}
 
@@ -4346,6 +4401,81 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 	}
 }
 
+static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 i, mac_reg;
+	u16 phy_reg;
+	int retval = 0;
+
+	/* copy MAC RARs to PHY RARs */
+	for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
+		mac_reg = er32(RAL(i));
+		e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
+		mac_reg = er32(RAH(i));
+		e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
+	}
+
+	/* copy MAC MTA to PHY MTA */
+	for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
+		mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
+		e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
+	}
+
+	/* configure PHY Rx Control register */
+	e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
+	mac_reg = er32(RCTL);
+	if (mac_reg & E1000_RCTL_UPE)
+		phy_reg |= BM_RCTL_UPE;
+	if (mac_reg & E1000_RCTL_MPE)
+		phy_reg |= BM_RCTL_MPE;
+	phy_reg &= ~(BM_RCTL_MO_MASK);
+	if (mac_reg & E1000_RCTL_MO_3)
+		phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
+				<< BM_RCTL_MO_SHIFT);
+	if (mac_reg & E1000_RCTL_BAM)
+		phy_reg |= BM_RCTL_BAM;
+	if (mac_reg & E1000_RCTL_PMCF)
+		phy_reg |= BM_RCTL_PMCF;
+	mac_reg = er32(CTRL);
+	if (mac_reg & E1000_CTRL_RFCE)
+		phy_reg |= BM_RCTL_RFCE;
+	e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
+
+	/* enable PHY wakeup in MAC register */
+	ew32(WUFC, wufc);
+	ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
+
+	/* configure and enable PHY wakeup in PHY registers */
+	e1e_wphy(&adapter->hw, BM_WUFC, wufc);
+	e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
+
+	/* activate PHY wakeup */
+	retval = hw->phy.ops.acquire_phy(hw);
+	if (retval) {
+		e_err("Could not acquire PHY\n");
+		return retval;
+	}
+	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+	                         (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+	retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
+	if (retval) {
+		e_err("Could not read PHY page 769\n");
+		goto out;
+	}
+	phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
+	retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (retval)
+		e_err("Could not set PHY Host Wakeup bit\n");
+out:
+	hw->phy.ops.release_phy(hw);
+
+	return retval;
+}
+
 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
@@ -4388,8 +4518,9 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		#define E1000_CTRL_ADVD3WUC 0x00100000
 		/* phy power management enable */
 		#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
-		ctrl |= E1000_CTRL_ADVD3WUC |
-			E1000_CTRL_EN_PHY_PWR_MGMT;
+		ctrl |= E1000_CTRL_ADVD3WUC;
+		if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
+			ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
 		ew32(CTRL, ctrl);
 
 		if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
@@ -4407,8 +4538,17 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		/* Allow time for pending master requests to run */
 		e1000e_disable_pcie_master(&adapter->hw);
 
-		ew32(WUC, E1000_WUC_PME_EN);
-		ew32(WUFC, wufc);
+		if ((adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) &&
+		    !(hw->mac.ops.check_mng_mode(hw))) {
+			/* enable wakeup by the PHY */
+			retval = e1000_init_phy_wakeup(adapter, wufc);
+			if (retval)
+				return retval;
+		} else {
+			/* enable wakeup by the MAC */
+			ew32(WUFC, wufc);
+			ew32(WUC, E1000_WUC_PME_EN);
+		}
 	} else {
 		ew32(WUC, 0);
 		ew32(WUFC, 0);
@@ -4551,8 +4691,37 @@ static int e1000_resume(struct pci_dev *pdev)
 	}
 
 	e1000e_power_up_phy(adapter);
+
+	/* report the system wakeup cause from S3/S4 */
+	if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
+		u16 phy_data;
+
+		e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
+		if (phy_data) {
+			e_info("PHY Wakeup cause - %s\n",
+				phy_data & E1000_WUS_EX ? "Unicast Packet" :
+				phy_data & E1000_WUS_MC ? "Multicast Packet" :
+				phy_data & E1000_WUS_BC ? "Broadcast Packet" :
+				phy_data & E1000_WUS_MAG ? "Magic Packet" :
+				phy_data & E1000_WUS_LNKC ? "Link Status "
+				" Change" : "other");
+		}
+		e1e_wphy(&adapter->hw, BM_WUS, ~0);
+	} else {
+		u32 wus = er32(WUS);
+		if (wus) {
+			e_info("MAC Wakeup cause - %s\n",
+				wus & E1000_WUS_EX ? "Unicast Packet" :
+				wus & E1000_WUS_MC ? "Multicast Packet" :
+				wus & E1000_WUS_BC ? "Broadcast Packet" :
+				wus & E1000_WUS_MAG ? "Magic Packet" :
+				wus & E1000_WUS_LNKC ? "Link Status Change" :
+				"other");
+		}
+		ew32(WUS, ~0);
+	}
+
 	e1000e_reset(adapter);
-	ew32(WUS, ~0);
 
 	e1000_init_manageability(adapter);
 
@@ -4842,6 +5011,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->flags2 = ei->flags2;
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
+	adapter->max_hw_frame_size = ei->max_hw_frame_size;
 	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
 
 	mmio_start = pci_resource_start(pdev, 0);
@@ -4997,6 +5167,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		/* APME bit in EEPROM is mapped to WUC.APME */
 		eeprom_data = er32(WUC);
 		eeprom_apme_mask = E1000_WUC_APME;
+		if (eeprom_data & E1000_WUC_PHY_WAKE)
+			adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
 	} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
 		if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
 		    (adapter->hw.bus.func == 1))
@@ -5037,15 +5209,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
-	/* tell the stack to leave us alone until e1000_open() is called */
-	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
-
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
 
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
 	e1000_print_device_info(adapter);
 
 	return 0;
@@ -5199,6 +5370,11 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
 
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
+
 	{ }	/* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index e909f96698e..1342e0b1815 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -427,6 +427,8 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 			e1000_validate_option(&crc_stripping, &opt, adapter);
 			if (crc_stripping == OPTION_ENABLED)
 				adapter->flags2 |= FLAG2_CRC_STRIPPING;
+		} else {
+			adapter->flags2 |= FLAG2_CRC_STRIPPING;
 		}
 	}
 	{ /* Kumeran Lock Loss Workaround */
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index dc4a9cba6a7..e23459cf3d0 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -37,6 +37,9 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw);
 static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
 static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 					  u16 *data, bool read);
+static u32 e1000_get_phy_addr_for_hv_page(u32 page);
+static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
+                                          u16 *data, bool read);
 
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
@@ -54,6 +57,55 @@ static const u16 e1000_igp_2_cable_length_table[] =
 #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
 		ARRAY_SIZE(e1000_igp_2_cable_length_table)
 
+#define BM_PHY_REG_PAGE(offset) \
+	((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
+#define BM_PHY_REG_NUM(offset) \
+	((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\
+	 (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\
+		~MAX_PHY_REG_ADDRESS)))
+
+#define HV_INTC_FC_PAGE_START             768
+#define I82578_ADDR_REG                   29
+#define I82577_ADDR_REG                   16
+#define I82577_CFG_REG                    22
+#define I82577_CFG_ASSERT_CRS_ON_TX       (1 << 15)
+#define I82577_CFG_ENABLE_DOWNSHIFT       (3 << 10) /* auto downshift 100/10 */
+#define I82577_CTRL_REG                   23
+#define I82577_CTRL_DOWNSHIFT_MASK        (7 << 10)
+
+/* 82577 specific PHY registers */
+#define I82577_PHY_CTRL_2            18
+#define I82577_PHY_STATUS_2          26
+#define I82577_PHY_DIAG_STATUS       31
+
+/* I82577 PHY Status 2 */
+#define I82577_PHY_STATUS2_REV_POLARITY   0x0400
+#define I82577_PHY_STATUS2_MDIX           0x0800
+#define I82577_PHY_STATUS2_SPEED_MASK     0x0300
+#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
+
+/* I82577 PHY Control 2 */
+#define I82577_PHY_CTRL2_AUTO_MDIX        0x0400
+#define I82577_PHY_CTRL2_FORCE_MDI_MDIX   0x0200
+
+/* I82577 PHY Diagnostics Status */
+#define I82577_DSTATUS_CABLE_LENGTH       0x03FC
+#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2
+
+/* BM PHY Copper Specific Control 1 */
+#define BM_CS_CTRL1                       16
+
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS                      17
+#define BM_CS_STATUS_LINK_UP              0x0400
+#define BM_CS_STATUS_RESOLVED             0x0800
+#define BM_CS_STATUS_SPEED_MASK           0xC000
+#define BM_CS_STATUS_SPEED_1000           0x8000
+
+#define HV_MUX_DATA_CTRL               PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC    0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED   0x0004
+
 /**
  *  e1000e_check_reset_block_generic - Check if PHY reset is blocked
  *  @hw: pointer to the HW structure
@@ -82,23 +134,48 @@ s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
 s32 e1000e_get_phy_id(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
+	s32 ret_val = 0;
 	u16 phy_id;
+	u16 retry_count = 0;
 
-	ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
-	if (ret_val)
-		return ret_val;
+	if (!(phy->ops.read_phy_reg))
+		goto out;
 
-	phy->id = (u32)(phy_id << 16);
-	udelay(20);
-	ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
-	if (ret_val)
-		return ret_val;
+	while (retry_count < 2) {
+		ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
+		if (ret_val)
+			goto out;
 
-	phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
-	phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+		phy->id = (u32)(phy_id << 16);
+		udelay(20);
+		ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
+		if (ret_val)
+			goto out;
 
-	return 0;
+		phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+		phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+		if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
+			goto out;
+
+		/*
+		 * If the PHY ID is still unknown, we may have an 82577i
+		 * without link.  We will try again after setting Slow
+		 * MDIC mode. No harm in trying again in this case since
+		 * the PHY ID is unknown at this point anyway
+		 */
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
+		if (ret_val)
+			goto out;
+
+		retry_count++;
+	}
+out:
+	/* Revert to MDIO fast mode, if applicable */
+	if (retry_count)
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+
+	return ret_val;
 }
 
 /**
@@ -410,6 +487,43 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
 }
 
 /**
+ *  e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+	/* Enable CRS on TX. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_phy_reg(hw, I82577_CFG_REG, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
+
+	/* Enable downshift */
+	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
+
+	ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
+	if (ret_val)
+		goto out;
+
+	/* Set number of link attempts before downshift */
+	ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data);
+	if (ret_val)
+		goto out;
+	phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
+	ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data);
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
  *  @hw: pointer to the HW structure
  *
@@ -427,8 +541,8 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/* For newer PHYs this bit is downshift enable */
-	if (phy->type == e1000_phy_m88)
+	/* For BM PHY this bit is downshift enable */
+	if (phy->type != e1000_phy_bm)
 		phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
 
 	/*
@@ -520,10 +634,27 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 
 	/* Commit the changes. */
 	ret_val = e1000e_commit_phy(hw);
-	if (ret_val)
+	if (ret_val) {
 		hw_dbg(hw, "Error committing the PHY changes\n");
+		return ret_val;
+	}
 
-	return ret_val;
+	if (phy->type == e1000_phy_82578) {
+		ret_val = phy->ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		                            &phy_data);
+		if (ret_val)
+			return ret_val;
+
+		/* 82578 PHY - set the downshift count to 1x. */
+		phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
+		phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
+		ret_val = phy->ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		                             phy_data);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return 0;
 }
 
 /**
@@ -1251,6 +1382,8 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 	switch (phy->type) {
 	case e1000_phy_m88:
 	case e1000_phy_gg82563:
+	case e1000_phy_82578:
+	case e1000_phy_82577:
 		offset	= M88E1000_PHY_SPEC_STATUS;
 		mask	= M88E1000_PSSR_DOWNSHIFT;
 		break;
@@ -1886,6 +2019,12 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 	case BME1000_E_PHY_ID_R2:
 		phy_type = e1000_phy_bm;
 		break;
+	case I82578_E_PHY_ID:
+		phy_type = e1000_phy_82578;
+		break;
+	case I82577_E_PHY_ID:
+		phy_type = e1000_phy_82577;
+		break;
 	default:
 		phy_type = e1000_phy_unknown;
 		break;
@@ -2181,11 +2320,16 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 					  u16 *data, bool read)
 {
 	s32 ret_val;
-	u16 reg = ((u16)offset) & PHY_REG_MASK;
+	u16 reg = BM_PHY_REG_NUM(offset);
 	u16 phy_reg = 0;
 	u8  phy_acquired = 1;
 
 
+	/* Gig must be disabled for MDIO accesses to page 800 */
+	if ((hw->mac.type == e1000_pchlan) &&
+	   (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
+		hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
+
 	ret_val = hw->phy.ops.acquire_phy(hw);
 	if (ret_val) {
 		phy_acquired = 0;
@@ -2289,3 +2433,524 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
 
 	return 0;
 }
+
+s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
+{
+	s32 ret_val = 0;
+	u16 data = 0;
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
+	hw->phy.addr = 1;
+	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+				         (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+	if (ret_val) {
+		hw->phy.ops.release_phy(hw);
+		return ret_val;
+	}
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
+	                                   (0x2180 | (slow << 10)));
+
+	/* dummy read when reverting to fast mode - throw away result */
+	if (!slow)
+		e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
+
+	hw->phy.ops.release_phy(hw);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_read_phy_reg_hv -  Read HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphore before exiting.
+ **/
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 reg = BM_PHY_REG_NUM(offset);
+	bool in_slow_mode = false;
+
+	/* Workaround failure in MDIO access while cable is disconnected */
+	if ((hw->phy.type == e1000_phy_82577) &&
+	    !(er32(STATUS) & E1000_STATUS_LU)) {
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
+		if (ret_val)
+			goto out;
+
+		in_slow_mode = true;
+	}
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
+		                                         data, true);
+		goto out;
+	}
+
+	if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+		ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
+		                                         data, true);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		goto out;
+
+	hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
+	if (page == HV_INTC_FC_PAGE_START)
+		page = 0;
+
+	if (reg > MAX_PHY_MULTI_PAGE_REG) {
+		if ((hw->phy.type != e1000_phy_82578) ||
+		    ((reg != I82578_ADDR_REG) &&
+		     (reg != I82578_ADDR_REG + 1))) {
+			u32 phy_addr = hw->phy.addr;
+
+			hw->phy.addr = 1;
+
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = e1000e_write_phy_reg_mdic(hw,
+			                             IGP01E1000_PHY_PAGE_SELECT,
+			                             (page << IGP_PAGE_SHIFT));
+			if (ret_val) {
+				hw->phy.ops.release_phy(hw);
+				goto out;
+			}
+			hw->phy.addr = phy_addr;
+		}
+	}
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+	                                  data);
+	hw->phy.ops.release_phy(hw);
+
+out:
+	/* Revert to MDIO fast mode, if applicable */
+	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_write_phy_reg_hv - Write HV PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u16 page = BM_PHY_REG_PAGE(offset);
+	u16 reg = BM_PHY_REG_NUM(offset);
+	bool in_slow_mode = false;
+
+	/* Workaround failure in MDIO access while cable is disconnected */
+	if ((hw->phy.type == e1000_phy_82577) &&
+	    !(er32(STATUS) & E1000_STATUS_LU)) {
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
+		if (ret_val)
+			goto out;
+
+		in_slow_mode = true;
+	}
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
+		                                         &data, false);
+		goto out;
+	}
+
+	if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+		ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
+		                                         &data, false);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		goto out;
+
+	hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
+	if (page == HV_INTC_FC_PAGE_START)
+		page = 0;
+
+	/*
+	 * Workaround MDIO accesses being disabled after entering IEEE Power
+	 * Down (whenever bit 11 of the PHY Control register is set)
+	 */
+	if ((hw->phy.type == e1000_phy_82578) &&
+	    (hw->phy.revision >= 1) &&
+	    (hw->phy.addr == 2) &&
+	    ((MAX_PHY_REG_ADDRESS & reg) == 0) &&
+	    (data & (1 << 11))) {
+		u16 data2 = 0x7EFF;
+		hw->phy.ops.release_phy(hw);
+		ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
+		                                         &data2, false);
+		if (ret_val)
+			goto out;
+
+		ret_val = hw->phy.ops.acquire_phy(hw);
+		if (ret_val)
+			goto out;
+	}
+
+	if (reg > MAX_PHY_MULTI_PAGE_REG) {
+		if ((hw->phy.type != e1000_phy_82578) ||
+		    ((reg != I82578_ADDR_REG) &&
+		     (reg != I82578_ADDR_REG + 1))) {
+			u32 phy_addr = hw->phy.addr;
+
+			hw->phy.addr = 1;
+
+			/* Page is shifted left, PHY expects (page x 32) */
+			ret_val = e1000e_write_phy_reg_mdic(hw,
+			                             IGP01E1000_PHY_PAGE_SELECT,
+			                             (page << IGP_PAGE_SHIFT));
+			if (ret_val) {
+				hw->phy.ops.release_phy(hw);
+				goto out;
+			}
+			hw->phy.addr = phy_addr;
+		}
+	}
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+	                                  data);
+	hw->phy.ops.release_phy(hw);
+
+out:
+	/* Revert to MDIO fast mode, if applicable */
+	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
+		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
+ *  @page: page to be accessed
+ **/
+static u32 e1000_get_phy_addr_for_hv_page(u32 page)
+{
+	u32 phy_addr = 2;
+
+	if (page >= HV_INTC_FC_PAGE_START)
+		phy_addr = 1;
+
+	return phy_addr;
+}
+
+/**
+ *  e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read or written
+ *  @data: pointer to the data to be read or written
+ *  @read: determines if operation is read or written
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retreived information in data.  Release any acquired
+ *  semaphores before exiting.  Note that the procedure to read these regs
+ *  uses the address port and data port to read/write.
+ **/
+static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
+                                          u16 *data, bool read)
+{
+	s32 ret_val;
+	u32 addr_reg = 0;
+	u32 data_reg = 0;
+	u8  phy_acquired = 1;
+
+	/* This takes care of the difference with desktop vs mobile phy */
+	addr_reg = (hw->phy.type == e1000_phy_82578) ?
+	           I82578_ADDR_REG : I82577_ADDR_REG;
+	data_reg = addr_reg + 1;
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val) {
+		hw_dbg(hw, "Could not acquire PHY\n");
+		phy_acquired = 0;
+		goto out;
+	}
+
+	/* All operations in this function are phy address 2 */
+	hw->phy.addr = 2;
+
+	/* masking with 0x3F to remove the page from offset */
+	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
+	if (ret_val) {
+		hw_dbg(hw, "Could not write PHY the HV address register\n");
+		goto out;
+	}
+
+	/* Read or write the data value next */
+	if (read)
+		ret_val = e1000e_read_phy_reg_mdic(hw, data_reg, data);
+	else
+		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
+
+	if (ret_val) {
+		hw_dbg(hw, "Could not read data value from HV data register\n");
+		goto out;
+	}
+
+out:
+	if (phy_acquired == 1)
+		hw->phy.ops.release_phy(hw);
+	return ret_val;
+}
+
+/**
+ *  e1000_link_stall_workaround_hv - Si workaround
+ *  @hw: pointer to the HW structure
+ *
+ *  This function works around a Si bug where the link partner can get
+ *  a link up indication before the PHY does.  If small packets are sent
+ *  by the link partner they can be placed in the packet buffer without
+ *  being properly accounted for by the PHY and will stall preventing
+ *  further packets from being received.  The workaround is to clear the
+ *  packet buffer after the PHY detects link up.
+ **/
+s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 data;
+
+	if (hw->phy.type != e1000_phy_82578)
+		goto out;
+
+	/* check if link is up and at 1Gbps */
+	ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
+	if (ret_val)
+		goto out;
+
+	data &= BM_CS_STATUS_LINK_UP |
+	        BM_CS_STATUS_RESOLVED |
+	        BM_CS_STATUS_SPEED_MASK;
+
+	if (data != (BM_CS_STATUS_LINK_UP |
+	             BM_CS_STATUS_RESOLVED |
+	             BM_CS_STATUS_SPEED_1000))
+		goto out;
+
+	mdelay(200);
+
+	/* flush the packets in the fifo buffer */
+	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	                                HV_MUX_DATA_CTRL_GEN_TO_MAC |
+	                                HV_MUX_DATA_CTRL_FORCE_SPEED);
+	if (ret_val)
+		goto out;
+
+	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	                                HV_MUX_DATA_CTRL_GEN_TO_MAC);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_check_polarity_82577 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+s32 e1000_check_polarity_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
+		                      ? e1000_rev_polarity_reversed
+		                      : e1000_rev_polarity_normal;
+
+	return ret_val;
+}
+
+/**
+ *  e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Waits for link and returns
+ *  successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+	ret_val = phy->ops.read_phy_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_phy_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Clear Auto-Crossover to force MDI manually.  82577 requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX;
+	phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX;
+
+	ret_val = phy->ops.write_phy_reg(hw, I82577_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		goto out;
+
+	hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+
+		if (!link)
+			hw_dbg(hw, "Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_info_82577 - Retrieve I82577 PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = e1000_check_polarity_82577(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
+
+	if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
+	    I82577_PHY_STATUS2_SPEED_1000MBPS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.read_phy_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			goto out;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+		                ? e1000_1000t_rx_status_ok
+		                : e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+		                 ? e1000_1000t_rx_status_ok
+		                 : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
+ *  @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, length;
+
+	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	if (ret_val)
+		goto out;
+
+	length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
+	         I82577_DSTATUS_CABLE_LENGTH_SHIFT;
+
+	if (length == E1000_CABLE_LENGTH_UNDEFINED)
+		ret_val = E1000_ERR_PHY;
+
+	phy->cable_length = length;
+
+out:
+	return ret_val;
+}
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 16a41389575..78952f8324e 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -268,7 +268,7 @@ struct ehea_qp_init_attr {
 };
 
 /*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
  */
 struct ehea_eq_attr {
 	u32 type;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index b22dab9153f..147c4b088fb 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3261,7 +3261,7 @@ static ssize_t ehea_probe_port(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ehea_adapter *adapter = dev->driver_data;
+	struct ehea_adapter *adapter = dev_get_drvdata(dev);
 	struct ehea_port *port;
 	struct device_node *eth_dn = NULL;
 	int i;
@@ -3316,7 +3316,7 @@ static ssize_t ehea_remove_port(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
-	struct ehea_adapter *adapter = dev->driver_data;
+	struct ehea_adapter *adapter = dev_get_drvdata(dev);
 	struct ehea_port *port;
 	int i;
 	u32 logical_port_id;
@@ -3404,7 +3404,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
 
 	adapter->pd = EHEA_PD_ID;
 
-	dev->dev.driver_data = adapter;
+	dev_set_drvdata(&dev->dev, adapter);
 
 
 	/* initialize adapter and ports */
@@ -3468,7 +3468,7 @@ out:
 
 static int __devexit ehea_remove(struct of_device *dev)
 {
-	struct ehea_adapter *adapter = dev->dev.driver_data;
+	struct ehea_adapter *adapter = dev_get_drvdata(&dev->dev);
 	int i;
 
 	for (i = 0; i < EHEA_MAX_PORTS; i++)
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 9080f07da8f..8005b602f77 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -661,8 +661,6 @@ static int enic_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	if (vnic_wq_desc_avail(wq) < MAX_SKB_FRAGS + 1)
 		netif_stop_queue(netdev);
 
-	netdev->trans_start = jiffies;
-
 	spin_unlock_irqrestore(&enic->wq_lock[0], flags);
 
 	return NETDEV_TX_OK;
diff --git a/drivers/net/eql.c b/drivers/net/eql.c
index 5210bb1027c..19b7dd98394 100644
--- a/drivers/net/eql.c
+++ b/drivers/net/eql.c
@@ -194,6 +194,7 @@ static void __init eql_setup(struct net_device *dev)
 
 	dev->type       	= ARPHRD_SLIP;
 	dev->tx_queue_len 	= 5;		/* Hands them off fast */
+	dev->priv_flags	       &= ~IFF_XMIT_DST_RELEASE;
 }
 
 static int eql_open(struct net_device *dev)
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 91a9b1a3376..ceb6a9c357a 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -811,7 +811,7 @@ static int ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (unlikely(skb->len > ETHOC_BUFSIZ)) {
 		priv->stats.tx_errors++;
-		return -EMSGSIZE;
+		goto out;
 	}
 
 	entry = priv->cur_tx % priv->num_tx;
@@ -840,9 +840,9 @@ static int ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	dev->trans_start = jiffies;
-	dev_kfree_skb(skb);
-
 	spin_unlock_irq(&priv->lock);
+out:
+	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index 1a685a04d4b..1e972328140 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -873,7 +873,7 @@ static int ewrk3_queue_pkt (struct sk_buff *skb, struct net_device *dev)
 err_out:
 	ENABLE_IRQs;
 	spin_unlock_irq (&lp->hw_lock);
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 
 /*
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 682e7f0b558..0f19b743749 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -86,8 +86,7 @@ static unsigned char	fec_mac_default[] = {
 #endif
 #endif /* CONFIG_M5272 */
 
-/* Forward declarations of some structures to support different PHYs
-*/
+/* Forward declarations of some structures to support different PHYs */
 
 typedef struct {
 	uint mii_data;
@@ -123,8 +122,7 @@ typedef struct {
 #error "FEC: descriptor ring size constants too large"
 #endif
 
-/* Interrupt events/masks.
-*/
+/* Interrupt events/masks. */
 #define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */
 #define FEC_ENET_BABR	((uint)0x40000000)	/* Babbling receiver */
 #define FEC_ENET_BABT	((uint)0x20000000)	/* Babbling transmitter */
@@ -165,7 +163,7 @@ typedef struct {
  */
 struct fec_enet_private {
 	/* Hardware registers of the FEC device */
-	volatile fec_t	*hwp;
+	void __iomem *hwp;
 
 	struct net_device *netdev;
 
@@ -174,16 +172,20 @@ struct fec_enet_private {
 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
 	unsigned char *tx_bounce[TX_RING_SIZE];
 	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
+	struct	sk_buff* rx_skbuff[RX_RING_SIZE];
 	ushort	skb_cur;
 	ushort	skb_dirty;
 
-	/* CPM dual port RAM relative addresses.
-	*/
+	/* CPM dual port RAM relative addresses */
 	dma_addr_t	bd_dma;
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
+	/* Address of Rx and Tx buffers */
+	struct bufdesc	*rx_bd_base;
+	struct bufdesc	*tx_bd_base;
+	/* The next free ring entry */
+	struct bufdesc	*cur_rx, *cur_tx; 
+	/* The ring entries to be free()ed */
+	struct bufdesc	*dirty_tx;
+
 	uint	tx_full;
 	/* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
 	spinlock_t hw_lock;
@@ -209,17 +211,13 @@ struct fec_enet_private {
 	int	full_duplex;
 };
 
-static int fec_enet_open(struct net_device *dev);
-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static void fec_enet_mii(struct net_device *dev);
 static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
 static void fec_enet_tx(struct net_device *dev);
 static void fec_enet_rx(struct net_device *dev);
 static int fec_enet_close(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
 static void fec_restart(struct net_device *dev, int duplex);
 static void fec_stop(struct net_device *dev);
-static void fec_set_mac_address(struct net_device *dev);
 
 
 /* MII processing.  We keep this as simple as possible.  Requests are
@@ -241,19 +239,16 @@ static mii_list_t	*mii_tail;
 static int	mii_queue(struct net_device *dev, int request,
 				void (*func)(uint, struct net_device *));
 
-/* Make MII read/write commands for the FEC.
-*/
+/* Make MII read/write commands for the FEC */
 #define mk_mii_read(REG)	(0x60020000 | ((REG & 0x1f) << 18))
 #define mk_mii_write(REG, VAL)	(0x50020000 | ((REG & 0x1f) << 18) | \
 						(VAL & 0xffff))
 #define mk_mii_end	0
 
-/* Transmitter timeout.
-*/
-#define TX_TIMEOUT (2*HZ)
+/* Transmitter timeout */
+#define TX_TIMEOUT (2 * HZ)
 
-/* Register definitions for the PHY.
-*/
+/* Register definitions for the PHY */
 
 #define MII_REG_CR          0  /* Control Register                         */
 #define MII_REG_SR          1  /* Status Register                          */
@@ -288,18 +283,14 @@ static int	mii_queue(struct net_device *dev, int request,
 static int
 fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	struct fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t	*bdp;
+	struct fec_enet_private *fep = netdev_priv(dev);
+	struct bufdesc *bdp;
 	unsigned short	status;
 	unsigned long flags;
 
-	fep = netdev_priv(dev);
-	fecp = (volatile fec_t*)dev->base_addr;
-
 	if (!fep->link) {
 		/* Link is down or autonegotiation is in progress. */
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	spin_lock_irqsave(&fep->hw_lock, flags);
@@ -307,30 +298,27 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	bdp = fep->cur_tx;
 
 	status = bdp->cbd_sc;
-#ifndef final_version
+
 	if (status & BD_ENET_TX_READY) {
 		/* Ooops.  All transmit buffers are full.  Bail out.
 		 * This should not happen, since dev->tbusy should be set.
 		 */
 		printk("%s: tx queue full!.\n", dev->name);
 		spin_unlock_irqrestore(&fep->hw_lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
-#endif
 
-	/* Clear all of the status flags.
-	 */
+	/* Clear all of the status flags */
 	status &= ~BD_ENET_TX_STATS;
 
-	/* Set buffer length and buffer pointer.
-	*/
+	/* Set buffer length and buffer pointer */
 	bdp->cbd_bufaddr = __pa(skb->data);
 	bdp->cbd_datlen = skb->len;
 
 	/*
-	 *	On some FEC implementations data must be aligned on
-	 *	4-byte boundaries. Use bounce buffers to copy data
-	 *	and get it aligned. Ugh.
+	 * On some FEC implementations data must be aligned on
+	 * 4-byte boundaries. Use bounce buffers to copy data
+	 * and get it aligned. Ugh.
 	 */
 	if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
 		unsigned int index;
@@ -339,8 +327,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
 	}
 
-	/* Save skb pointer.
-	*/
+	/* Save skb pointer */
 	fep->tx_skbuff[fep->skb_cur] = skb;
 
 	dev->stats.tx_bytes += skb->len;
@@ -349,13 +336,12 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Push the data cache so the CPM does not get stale memory
 	 * data.
 	 */
-	dma_sync_single(NULL, bdp->cbd_bufaddr,
-			bdp->cbd_datlen, DMA_TO_DEVICE);
+	bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
+			FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
 
 	/* Send it on its way.  Tell FEC it's ready, interrupt when done,
 	 * it's the last BD of the frame, and to put the CRC on the end.
 	 */
-
 	status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
 			| BD_ENET_TX_LAST | BD_ENET_TX_TC);
 	bdp->cbd_sc = status;
@@ -363,22 +349,20 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->trans_start = jiffies;
 
 	/* Trigger transmission start */
-	fecp->fec_x_des_active = 0;
+	writel(0, fep->hwp + FEC_X_DES_ACTIVE);
 
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (status & BD_ENET_TX_WRAP) {
+	/* If this was the last BD in the ring, start at the beginning again. */
+	if (status & BD_ENET_TX_WRAP)
 		bdp = fep->tx_bd_base;
-	} else {
+	else
 		bdp++;
-	}
 
 	if (bdp == fep->dirty_tx) {
 		fep->tx_full = 1;
 		netif_stop_queue(dev);
 	}
 
-	fep->cur_tx = (cbd_t *)bdp;
+	fep->cur_tx = bdp;
 
 	spin_unlock_irqrestore(&fep->hw_lock, flags);
 
@@ -390,75 +374,33 @@ fec_timeout(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 
-	printk("%s: transmit timed out.\n", dev->name);
 	dev->stats.tx_errors++;
-#ifndef final_version
-	{
-	int	i;
-	cbd_t	*bdp;
-
-	printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
-	       (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "",
-	       (unsigned long)fep->dirty_tx,
-	       (unsigned long)fep->cur_rx);
-
-	bdp = fep->tx_bd_base;
-	printk(" tx: %u buffers\n",  TX_RING_SIZE);
-	for (i = 0 ; i < TX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       (int) bdp->cbd_bufaddr);
-		bdp++;
-	}
 
-	bdp = fep->rx_bd_base;
-	printk(" rx: %lu buffers\n",  (unsigned long) RX_RING_SIZE);
-	for (i = 0 ; i < RX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       (int) bdp->cbd_bufaddr);
-		bdp++;
-	}
-	}
-#endif
 	fec_restart(dev, fep->full_duplex);
 	netif_wake_queue(dev);
 }
 
-/* The interrupt handler.
- * This is called from the MPC core interrupt.
- */
 static irqreturn_t
 fec_enet_interrupt(int irq, void * dev_id)
 {
 	struct	net_device *dev = dev_id;
-	volatile fec_t	*fecp;
+	struct fec_enet_private *fep = netdev_priv(dev);
 	uint	int_events;
 	irqreturn_t ret = IRQ_NONE;
 
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
 	do {
-		int_events = fecp->fec_ievent;
-		fecp->fec_ievent = int_events;
+		int_events = readl(fep->hwp + FEC_IEVENT);
+		writel(int_events, fep->hwp + FEC_IEVENT);
 
-		/* Handle receive event in its own function.
-		 */
 		if (int_events & FEC_ENET_RXF) {
 			ret = IRQ_HANDLED;
 			fec_enet_rx(dev);
 		}
 
 		/* Transmit OK, or non-fatal error. Update the buffer
-		   descriptors. FEC handles all errors, we just discover
-		   them as part of the transmit process.
-		*/
+		 * descriptors. FEC handles all errors, we just discover
+		 * them as part of the transmit process.
+		 */
 		if (int_events & FEC_ENET_TXF) {
 			ret = IRQ_HANDLED;
 			fec_enet_tx(dev);
@@ -479,7 +421,7 @@ static void
 fec_enet_tx(struct net_device *dev)
 {
 	struct	fec_enet_private *fep;
-	volatile cbd_t	*bdp;
+	struct bufdesc *bdp;
 	unsigned short status;
 	struct	sk_buff	*skb;
 
@@ -488,7 +430,11 @@ fec_enet_tx(struct net_device *dev)
 	bdp = fep->dirty_tx;
 
 	while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
-		if (bdp == fep->cur_tx && fep->tx_full == 0) break;
+		if (bdp == fep->cur_tx && fep->tx_full == 0)
+			break;
+
+		dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
+		bdp->cbd_bufaddr = 0;
 
 		skb = fep->tx_skbuff[fep->skb_dirty];
 		/* Check for errors. */
@@ -510,31 +456,27 @@ fec_enet_tx(struct net_device *dev)
 			dev->stats.tx_packets++;
 		}
 
-#ifndef final_version
 		if (status & BD_ENET_TX_READY)
 			printk("HEY! Enet xmit interrupt and TX_READY.\n");
-#endif
+
 		/* Deferred means some collisions occurred during transmit,
 		 * but we eventually sent the packet OK.
 		 */
 		if (status & BD_ENET_TX_DEF)
 			dev->stats.collisions++;
 
-		/* Free the sk buffer associated with this last transmit.
-		 */
+		/* Free the sk buffer associated with this last transmit */
 		dev_kfree_skb_any(skb);
 		fep->tx_skbuff[fep->skb_dirty] = NULL;
 		fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
 
-		/* Update pointer to next buffer descriptor to be transmitted.
-		 */
+		/* Update pointer to next buffer descriptor to be transmitted */
 		if (status & BD_ENET_TX_WRAP)
 			bdp = fep->tx_bd_base;
 		else
 			bdp++;
 
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
+		/* Since we have freed up a buffer, the ring is no longer full
 		 */
 		if (fep->tx_full) {
 			fep->tx_full = 0;
@@ -542,7 +484,7 @@ fec_enet_tx(struct net_device *dev)
 				netif_wake_queue(dev);
 		}
 	}
-	fep->dirty_tx = (cbd_t *)bdp;
+	fep->dirty_tx = bdp;
 	spin_unlock_irq(&fep->hw_lock);
 }
 
@@ -555,9 +497,8 @@ fec_enet_tx(struct net_device *dev)
 static void
 fec_enet_rx(struct net_device *dev)
 {
-	struct	fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t *bdp;
+	struct	fec_enet_private *fep = netdev_priv(dev);
+	struct bufdesc *bdp;
 	unsigned short status;
 	struct	sk_buff	*skb;
 	ushort	pkt_len;
@@ -567,9 +508,6 @@ fec_enet_rx(struct net_device *dev)
 	flush_cache_all();
 #endif
 
-	fep = netdev_priv(dev);
-	fecp = (volatile fec_t*)dev->base_addr;
-
 	spin_lock_irq(&fep->hw_lock);
 
 	/* First, grab all of the stats for the incoming packet.
@@ -577,143 +515,121 @@ fec_enet_rx(struct net_device *dev)
 	 */
 	bdp = fep->cur_rx;
 
-while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
+	while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
 
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame,
-	 * the last indicator should be set.
-	 */
-	if ((status & BD_ENET_RX_LAST) == 0)
-		printk("FEC ENET: rcv is not +last\n");
-#endif
+		/* Since we have allocated space to hold a complete frame,
+		 * the last indicator should be set.
+		 */
+		if ((status & BD_ENET_RX_LAST) == 0)
+			printk("FEC ENET: rcv is not +last\n");
 
-	if (!fep->opened)
-		goto rx_processing_done;
+		if (!fep->opened)
+			goto rx_processing_done;
 
-	/* Check for errors. */
-	if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
+		/* Check for errors. */
+		if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
 			   BD_ENET_RX_CR | BD_ENET_RX_OV)) {
-		dev->stats.rx_errors++;
-		if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
-		/* Frame too long or too short. */
-			dev->stats.rx_length_errors++;
+			dev->stats.rx_errors++;
+			if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
+				/* Frame too long or too short. */
+				dev->stats.rx_length_errors++;
+			}
+			if (status & BD_ENET_RX_NO)	/* Frame alignment */
+				dev->stats.rx_frame_errors++;
+			if (status & BD_ENET_RX_CR)	/* CRC Error */
+				dev->stats.rx_crc_errors++;
+			if (status & BD_ENET_RX_OV)	/* FIFO overrun */
+				dev->stats.rx_fifo_errors++;
 		}
-		if (status & BD_ENET_RX_NO)	/* Frame alignment */
+
+		/* Report late collisions as a frame error.
+		 * On this error, the BD is closed, but we don't know what we
+		 * have in the buffer.  So, just drop this frame on the floor.
+		 */
+		if (status & BD_ENET_RX_CL) {
+			dev->stats.rx_errors++;
 			dev->stats.rx_frame_errors++;
-		if (status & BD_ENET_RX_CR)	/* CRC Error */
-			dev->stats.rx_crc_errors++;
-		if (status & BD_ENET_RX_OV)	/* FIFO overrun */
-			dev->stats.rx_fifo_errors++;
-	}
+			goto rx_processing_done;
+		}
 
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (status & BD_ENET_RX_CL) {
-		dev->stats.rx_errors++;
-		dev->stats.rx_frame_errors++;
-		goto rx_processing_done;
-	}
+		/* Process the incoming frame. */
+		dev->stats.rx_packets++;
+		pkt_len = bdp->cbd_datlen;
+		dev->stats.rx_bytes += pkt_len;
+		data = (__u8*)__va(bdp->cbd_bufaddr);
 
-	/* Process the incoming frame.
-	 */
-	dev->stats.rx_packets++;
-	pkt_len = bdp->cbd_datlen;
-	dev->stats.rx_bytes += pkt_len;
-	data = (__u8*)__va(bdp->cbd_bufaddr);
-
-	dma_sync_single(NULL, (unsigned long)__pa(data),
-			pkt_len - 4, DMA_FROM_DEVICE);
-
-	/* This does 16 byte alignment, exactly what we need.
-	 * The packet length includes FCS, but we don't want to
-	 * include that when passing upstream as it messes up
-	 * bridging applications.
-	 */
-	skb = dev_alloc_skb(pkt_len-4);
+	        dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen,
+        			DMA_FROM_DEVICE);
 
-	if (skb == NULL) {
-		printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-		dev->stats.rx_dropped++;
-	} else {
-		skb_put(skb,pkt_len-4);	/* Make room */
-		skb_copy_to_linear_data(skb, data, pkt_len-4);
-		skb->protocol=eth_type_trans(skb,dev);
-		netif_rx(skb);
-	}
-  rx_processing_done:
+		/* This does 16 byte alignment, exactly what we need.
+		 * The packet length includes FCS, but we don't want to
+		 * include that when passing upstream as it messes up
+		 * bridging applications.
+		 */
+		skb = dev_alloc_skb(pkt_len - 4 + NET_IP_ALIGN);
 
-	/* Clear the status flags for this buffer.
-	*/
-	status &= ~BD_ENET_RX_STATS;
+		if (unlikely(!skb)) {
+			printk("%s: Memory squeeze, dropping packet.\n",
+					dev->name);
+			dev->stats.rx_dropped++;
+		} else {
+			skb_reserve(skb, NET_IP_ALIGN);
+			skb_put(skb, pkt_len - 4);	/* Make room */
+			skb_copy_to_linear_data(skb, data, pkt_len - 4);
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+		}
 
-	/* Mark the buffer empty.
-	*/
-	status |= BD_ENET_RX_EMPTY;
-	bdp->cbd_sc = status;
+        	bdp->cbd_bufaddr = dma_map_single(NULL, data, bdp->cbd_datlen,
+			DMA_FROM_DEVICE);
+rx_processing_done:
+		/* Clear the status flags for this buffer */
+		status &= ~BD_ENET_RX_STATS;
 
-	/* Update BD pointer to next entry.
-	*/
-	if (status & BD_ENET_RX_WRAP)
-		bdp = fep->rx_bd_base;
-	else
-		bdp++;
+		/* Mark the buffer empty */
+		status |= BD_ENET_RX_EMPTY;
+		bdp->cbd_sc = status;
 
-#if 1
-	/* Doing this here will keep the FEC running while we process
-	 * incoming frames.  On a heavily loaded network, we should be
-	 * able to keep up at the expense of system resources.
-	 */
-	fecp->fec_r_des_active = 0;
-#endif
-   } /* while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) */
-	fep->cur_rx = (cbd_t *)bdp;
-
-#if 0
-	/* Doing this here will allow us to process all frames in the
-	 * ring before the FEC is allowed to put more there.  On a heavily
-	 * loaded network, some frames may be lost.  Unfortunately, this
-	 * increases the interrupt overhead since we can potentially work
-	 * our way back to the interrupt return only to come right back
-	 * here.
-	 */
-	fecp->fec_r_des_active = 0;
-#endif
+		/* Update BD pointer to next entry */
+		if (status & BD_ENET_RX_WRAP)
+			bdp = fep->rx_bd_base;
+		else
+			bdp++;
+		/* Doing this here will keep the FEC running while we process
+		 * incoming frames.  On a heavily loaded network, we should be
+		 * able to keep up at the expense of system resources.
+		 */
+		writel(0, fep->hwp + FEC_R_DES_ACTIVE);
+	}
+	fep->cur_rx = bdp;
 
 	spin_unlock_irq(&fep->hw_lock);
 }
 
-
 /* called from interrupt context */
 static void
 fec_enet_mii(struct net_device *dev)
 {
 	struct	fec_enet_private *fep;
-	volatile fec_t	*ep;
 	mii_list_t	*mip;
-	uint		mii_reg;
 
 	fep = netdev_priv(dev);
 	spin_lock_irq(&fep->mii_lock);
 
-	ep = fep->hwp;
-	mii_reg = ep->fec_mii_data;
-
 	if ((mip = mii_head) == NULL) {
 		printk("MII and no head!\n");
 		goto unlock;
 	}
 
 	if (mip->mii_func != NULL)
-		(*(mip->mii_func))(mii_reg, dev);
+		(*(mip->mii_func))(readl(fep->hwp + FEC_MII_DATA), dev);
 
 	mii_head = mip->mii_next;
 	mip->mii_next = mii_free;
 	mii_free = mip;
 
 	if ((mip = mii_head) != NULL)
-		ep->fec_mii_data = mip->mii_regval;
+		writel(mip->mii_regval, fep->hwp + FEC_MII_DATA);
 
 unlock:
 	spin_unlock_irq(&fep->mii_lock);
@@ -727,8 +643,7 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
 	mii_list_t	*mip;
 	int		retval;
 
-	/* Add PHY address to register command.
-	*/
+	/* Add PHY address to register command */
 	fep = netdev_priv(dev);
 	spin_lock_irqsave(&fep->mii_lock, flags);
 
@@ -745,7 +660,7 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
 			mii_tail = mip;
 		} else {
 			mii_head = mii_tail = mip;
-			fep->hwp->fec_mii_data = regval;
+			writel(regval, fep->hwp + FEC_MII_DATA);
 		}
 	} else {
 		retval = 1;
@@ -1246,11 +1161,8 @@ static void __inline__ fec_phy_ack_intr(void)
 static void __inline__ fec_get_mac(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
-	volatile fec_t *fecp;
 	unsigned char *iap, tmpaddr[ETH_ALEN];
 
-	fecp = fep->hwp;
-
 	if (FEC_FLASHMAC) {
 		/*
 		 * Get MAC address from FLASH.
@@ -1264,8 +1176,8 @@ static void __inline__ fec_get_mac(struct net_device *dev)
 		    (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
 			iap = fec_mac_default;
 	} else {
-		*((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
-		*((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
+		*((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
+		*((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
 		iap = &tmpaddr[0];
 	}
 
@@ -1375,11 +1287,6 @@ static void mii_relink(struct work_struct *work)
 		fec_restart(dev, duplex);
 	} else
 		fec_stop(dev);
-
-#if 0
-	enable_irq(fep->mii_irq);
-#endif
-
 }
 
 /* mii_queue_relink is called in interrupt context from mii_link_interrupt */
@@ -1388,12 +1295,12 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev)
 	struct fec_enet_private *fep = netdev_priv(dev);
 
 	/*
-	** We cannot queue phy_task twice in the workqueue.  It
-	** would cause an endless loop in the workqueue.
-	** Fortunately, if the last mii_relink entry has not yet been
-	** executed now, it will do the job for the current interrupt,
-	** which is just what we want.
-	*/
+	 * We cannot queue phy_task twice in the workqueue.  It
+	 * would cause an endless loop in the workqueue.
+	 * Fortunately, if the last mii_relink entry has not yet been
+	 * executed now, it will do the job for the current interrupt,
+	 * which is just what we want.
+	 */
 	if (fep->mii_phy_task_queued)
 		return;
 
@@ -1424,8 +1331,7 @@ phy_cmd_t const phy_cmd_config[] = {
 	{ mk_mii_end, }
 	};
 
-/* Read remainder of PHY ID.
-*/
+/* Read remainder of PHY ID. */
 static void
 mii_discover_phy3(uint mii_reg, struct net_device *dev)
 {
@@ -1457,17 +1363,14 @@ static void
 mii_discover_phy(uint mii_reg, struct net_device *dev)
 {
 	struct fec_enet_private *fep;
-	volatile fec_t *fecp;
 	uint phytype;
 
 	fep = netdev_priv(dev);
-	fecp = fep->hwp;
 
 	if (fep->phy_addr < 32) {
 		if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
 
-			/* Got first part of ID, now get remainder.
-			*/
+			/* Got first part of ID, now get remainder */
 			fep->phy_id = phytype << 16;
 			mii_queue(dev, mk_mii_read(MII_REG_PHYIR2),
 							mii_discover_phy3);
@@ -1479,15 +1382,15 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
 	} else {
 		printk("FEC: No PHY device found.\n");
 		/* Disable external MII interface */
-		fecp->fec_mii_speed = fep->phy_speed = 0;
+		writel(0, fep->hwp + FEC_MII_SPEED);
+		fep->phy_speed = 0;
 #ifdef HAVE_mii_link_interrupt
 		fec_disable_phy_intr();
 #endif
 	}
 }
 
-/* This interrupt occurs when the PHY detects a link change.
-*/
+/* This interrupt occurs when the PHY detects a link change */
 #ifdef HAVE_mii_link_interrupt
 static irqreturn_t
 mii_link_interrupt(int irq, void * dev_id)
@@ -1497,10 +1400,6 @@ mii_link_interrupt(int irq, void * dev_id)
 
 	fec_phy_ack_intr();
 
-#if 0
-	disable_irq(fep->mii_irq);  /* disable now, enable later */
-#endif
-
 	mii_do_cmd(dev, fep->phy->ack_int);
 	mii_do_cmd(dev, phy_cmd_relink);  /* restart and display status */
 
@@ -1508,19 +1407,91 @@ mii_link_interrupt(int irq, void * dev_id)
 }
 #endif
 
+static void fec_enet_free_buffers(struct net_device *dev)
+{
+	struct fec_enet_private *fep = netdev_priv(dev);
+	int i;
+	struct sk_buff *skb;
+	struct bufdesc	*bdp;
+
+	bdp = fep->rx_bd_base;
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		skb = fep->rx_skbuff[i];
+
+		if (bdp->cbd_bufaddr)
+			dma_unmap_single(&dev->dev, bdp->cbd_bufaddr,
+					FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
+		if (skb)
+			dev_kfree_skb(skb);
+		bdp++;
+	}
+
+	bdp = fep->tx_bd_base;
+	for (i = 0; i < TX_RING_SIZE; i++)
+		kfree(fep->tx_bounce[i]);
+}
+
+static int fec_enet_alloc_buffers(struct net_device *dev)
+{
+	struct fec_enet_private *fep = netdev_priv(dev);
+	int i;
+	struct sk_buff *skb;
+	struct bufdesc	*bdp;
+
+	bdp = fep->rx_bd_base;
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		skb = dev_alloc_skb(FEC_ENET_RX_FRSIZE);
+		if (!skb) {
+			fec_enet_free_buffers(dev);
+			return -ENOMEM;
+		}
+		fep->rx_skbuff[i] = skb;
+
+		bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data,
+				FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
+		bdp->cbd_sc = BD_ENET_RX_EMPTY;
+		bdp++;
+	}
+
+	/* Set the last buffer to wrap. */
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+
+	bdp = fep->tx_bd_base;
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_KERNEL);
+
+		bdp->cbd_sc = 0;
+		bdp->cbd_bufaddr = 0;
+		bdp++;
+	}
+
+	/* Set the last buffer to wrap. */
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+
+	return 0;
+}
+
 static int
 fec_enet_open(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
+	int ret;
 
 	/* I should reset the ring buffers here, but I don't yet know
 	 * a simple way to do that.
 	 */
-	fec_set_mac_address(dev);
+
+	ret = fec_enet_alloc_buffers(dev);
+	if (ret)
+		return ret;
 
 	fep->sequence_done = 0;
 	fep->link = 0;
 
+	fec_restart(dev, 1);
+
 	if (fep->phy) {
 		mii_do_cmd(dev, fep->phy->ack_int);
 		mii_do_cmd(dev, fep->phy->config);
@@ -1537,21 +1508,17 @@ fec_enet_open(struct net_device *dev)
 			schedule();
 
 		mii_do_cmd(dev, fep->phy->startup);
-
-		/* Set the initial link state to true. A lot of hardware
-		 * based on this device does not implement a PHY interrupt,
-		 * so we are never notified of link change.
-		 */
-		fep->link = 1;
-	} else {
-		fep->link = 1; /* lets just try it and see */
-		/* no phy,  go full duplex,  it's most likely a hub chip */
-		fec_restart(dev, 1);
 	}
 
+	/* Set the initial link state to true. A lot of hardware
+	 * based on this device does not implement a PHY interrupt,
+	 * so we are never notified of link change.
+	 */
+	fep->link = 1;
+
 	netif_start_queue(dev);
 	fep->opened = 1;
-	return 0;		/* Success */
+	return 0;
 }
 
 static int
@@ -1559,12 +1526,13 @@ fec_enet_close(struct net_device *dev)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
 
-	/* Don't know what to do yet.
-	*/
+	/* Don't know what to do yet. */
 	fep->opened = 0;
 	netif_stop_queue(dev);
 	fec_stop(dev);
 
+        fec_enet_free_buffers(dev);
+
 	return 0;
 }
 
@@ -1583,87 +1551,102 @@ fec_enet_close(struct net_device *dev)
 
 static void set_multicast_list(struct net_device *dev)
 {
-	struct fec_enet_private *fep;
-	volatile fec_t *ep;
+	struct fec_enet_private *fep = netdev_priv(dev);
 	struct dev_mc_list *dmi;
-	unsigned int i, j, bit, data, crc;
+	unsigned int i, j, bit, data, crc, tmp;
 	unsigned char hash;
 
-	fep = netdev_priv(dev);
-	ep = fep->hwp;
+	if (dev->flags & IFF_PROMISC) {
+		tmp = readl(fep->hwp + FEC_R_CNTRL);
+		tmp |= 0x8;
+		writel(tmp, fep->hwp + FEC_R_CNTRL);
+		return;
+	}
 
-	if (dev->flags&IFF_PROMISC) {
-		ep->fec_r_cntrl |= 0x0008;
-	} else {
+	tmp = readl(fep->hwp + FEC_R_CNTRL);
+	tmp &= ~0x8;
+	writel(tmp, fep->hwp + FEC_R_CNTRL);
+
+	if (dev->flags & IFF_ALLMULTI) {
+		/* Catch all multicast addresses, so set the
+		 * filter to all 1's
+		 */
+		writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+		writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
 
-		ep->fec_r_cntrl &= ~0x0008;
+		return;
+	}
 
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->fec_grp_hash_table_high = 0xffffffff;
-			ep->fec_grp_hash_table_low = 0xffffffff;
-		} else {
-			/* Clear filter and add the addresses in hash register.
-			*/
-			ep->fec_grp_hash_table_high = 0;
-			ep->fec_grp_hash_table_low = 0;
-
-			dmi = dev->mc_list;
-
-			for (j = 0; j < dev->mc_count; j++, dmi = dmi->next)
-			{
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* calculate crc32 value of mac address
-				*/
-				crc = 0xffffffff;
-
-				for (i = 0; i < dmi->dmi_addrlen; i++)
-				{
-					data = dmi->dmi_addr[i];
-					for (bit = 0; bit < 8; bit++, data >>= 1)
-					{
-						crc = (crc >> 1) ^
-						(((crc ^ data) & 1) ? CRC32_POLY : 0);
-					}
-				}
-
-				/* only upper 6 bits (HASH_BITS) are used
-				   which point to specific bit in he hash registers
-				*/
-				hash = (crc >> (32 - HASH_BITS)) & 0x3f;
-
-				if (hash > 31)
-					ep->fec_grp_hash_table_high |= 1 << (hash - 32);
-				else
-					ep->fec_grp_hash_table_low |= 1 << hash;
+	/* Clear filter and add the addresses in hash register
+	 */
+	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+
+	dmi = dev->mc_list;
+
+	for (j = 0; j < dev->mc_count; j++, dmi = dmi->next) {
+		/* Only support group multicast for now */
+		if (!(dmi->dmi_addr[0] & 1))
+			continue;
+
+		/* calculate crc32 value of mac address */
+		crc = 0xffffffff;
+
+		for (i = 0; i < dmi->dmi_addrlen; i++) {
+			data = dmi->dmi_addr[i];
+			for (bit = 0; bit < 8; bit++, data >>= 1) {
+				crc = (crc >> 1) ^
+				(((crc ^ data) & 1) ? CRC32_POLY : 0);
 			}
 		}
+
+		/* only upper 6 bits (HASH_BITS) are used
+		 * which point to specific bit in he hash registers
+		 */
+		hash = (crc >> (32 - HASH_BITS)) & 0x3f;
+
+		if (hash > 31) {
+			tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+			tmp |= 1 << (hash - 32);
+			writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+		} else {
+			tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+			tmp |= 1 << hash;
+			writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+		}
 	}
 }
 
-/* Set a MAC change in hardware.
- */
-static void
-fec_set_mac_address(struct net_device *dev)
+/* Set a MAC change in hardware. */
+static int
+fec_set_mac_address(struct net_device *dev, void *p)
 {
-	volatile fec_t *fecp;
+	struct fec_enet_private *fep = netdev_priv(dev);
+	struct sockaddr *addr = p;
 
-	fecp = ((struct fec_enet_private *)netdev_priv(dev))->hwp;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
 
-	/* Set station address. */
-	fecp->fec_addr_low = dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
-		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24);
-	fecp->fec_addr_high = (dev->dev_addr[5] << 16) |
-		(dev->dev_addr[4] << 24);
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 
+	writel(dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
+		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24),
+		fep->hwp + FEC_ADDR_LOW);
+	writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
+		fep + FEC_ADDR_HIGH);
+	return 0;
 }
 
+static const struct net_device_ops fec_netdev_ops = {
+	.ndo_open		= fec_enet_open,
+	.ndo_stop		= fec_enet_close,
+	.ndo_start_xmit		= fec_enet_start_xmit,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_tx_timeout		= fec_timeout,
+	.ndo_set_mac_address	= fec_set_mac_address,
+};
+
  /*
   * XXX:  We need to clean up on failure exits here.
   *
@@ -1672,17 +1655,13 @@ fec_set_mac_address(struct net_device *dev)
 int __init fec_enet_init(struct net_device *dev, int index)
 {
 	struct fec_enet_private *fep = netdev_priv(dev);
-	unsigned long	mem_addr;
-	volatile cbd_t	*bdp;
-	cbd_t		*cbd_base;
-	volatile fec_t	*fecp;
-	int 		i, j;
+	struct bufdesc *cbd_base;
+	int i;
 
-	/* Allocate memory for buffer descriptors.
-	*/
-	mem_addr = (unsigned long)dma_alloc_coherent(NULL, PAGE_SIZE,
-			&fep->bd_dma, GFP_KERNEL);
-	if (mem_addr == 0) {
+	/* Allocate memory for buffer descriptors. */
+	cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
+			GFP_KERNEL);
+	if (!cbd_base) {
 		printk("FEC: allocate descriptor memory failed?\n");
 		return -ENOMEM;
 	}
@@ -1690,146 +1669,47 @@ int __init fec_enet_init(struct net_device *dev, int index)
 	spin_lock_init(&fep->hw_lock);
 	spin_lock_init(&fep->mii_lock);
 
-	/* Create an Ethernet device instance.
-	*/
-	fecp = (volatile fec_t *)dev->base_addr;
-
 	fep->index = index;
-	fep->hwp = fecp;
+	fep->hwp = (void __iomem *)dev->base_addr;
 	fep->netdev = dev;
 
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = 1;
-	udelay(10);
-
 	/* Set the Ethernet address */
 #ifdef CONFIG_M5272
 	fec_get_mac(dev);
 #else
 	{
 		unsigned long l;
-		l = fecp->fec_addr_low;
+		l = readl(fep->hwp + FEC_ADDR_LOW);
 		dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
 		dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
 		dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
 		dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
-		l = fecp->fec_addr_high;
+		l = readl(fep->hwp + FEC_ADDR_HIGH);
 		dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
 		dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
 	}
 #endif
 
-	cbd_base = (cbd_t *)mem_addr;
-
-	/* Set receive and transmit descriptor base.
-	*/
+	/* Set receive and transmit descriptor base. */
 	fep->rx_bd_base = cbd_base;
 	fep->tx_bd_base = cbd_base + RX_RING_SIZE;
 
-	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-	fep->cur_rx = fep->rx_bd_base;
-
-	fep->skb_cur = fep->skb_dirty = 0;
-
-	/* Initialize the receive buffer descriptors.
-	*/
-	bdp = fep->rx_bd_base;
-	for (i=0; i<FEC_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		mem_addr = __get_free_page(GFP_KERNEL);
-		/* XXX: missing check for allocation failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY;
-			bdp->cbd_bufaddr = __pa(mem_addr);
-			mem_addr += FEC_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* ...and the same for transmmit.
-	*/
-	bdp = fep->tx_bd_base;
-	for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) {
-		if (j >= FEC_ENET_TX_FRPPG) {
-			mem_addr = __get_free_page(GFP_KERNEL);
-			j = 1;
-		} else {
-			mem_addr += FEC_ENET_TX_FRSIZE;
-			j++;
-		}
-		fep->tx_bounce[i] = (unsigned char *) mem_addr;
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fecp->fec_r_des_start = fep->bd_dma;
-	fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
-				* RX_RING_SIZE;
-
 #ifdef HAVE_mii_link_interrupt
 	fec_request_mii_intr(dev);
 #endif
-
-	fecp->fec_grp_hash_table_high = 0;
-	fecp->fec_grp_hash_table_low = 0;
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-	fecp->fec_ecntrl = 2;
-	fecp->fec_r_des_active = 0;
-#ifndef CONFIG_M5272
-	fecp->fec_hash_table_high = 0;
-	fecp->fec_hash_table_low = 0;
-#endif
-
-	/* The FEC Ethernet specific entries in the device structure. */
-	dev->open = fec_enet_open;
-	dev->hard_start_xmit = fec_enet_start_xmit;
-	dev->tx_timeout = fec_timeout;
+	/* The FEC Ethernet specific entries in the device structure */
 	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = fec_enet_close;
-	dev->set_multicast_list = set_multicast_list;
+	dev->netdev_ops = &fec_netdev_ops;
 
 	for (i=0; i<NMII-1; i++)
 		mii_cmds[i].mii_next = &mii_cmds[i+1];
 	mii_free = mii_cmds;
 
-	/* setup MII interface */
-	fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
-	fecp->fec_x_cntrl = 0x00;
-
-	/*
-	 * Set MII speed to 2.5 MHz
-	 */
+	/* Set MII speed to 2.5 MHz */
 	fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
 					/ 2500000) / 2) & 0x3F) << 1;
-	fecp->fec_mii_speed = fep->phy_speed;
 	fec_restart(dev, 0);
 
-	/* Clear and enable interrupts */
-	fecp->fec_ievent = 0xffc00000;
-	fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
-
 	/* Queue up command to detect the PHY and initialize the
 	 * remainder of the interface.
 	 */
@@ -1847,145 +1727,118 @@ int __init fec_enet_init(struct net_device *dev, int index)
 static void
 fec_restart(struct net_device *dev, int duplex)
 {
-	struct fec_enet_private *fep;
-	volatile cbd_t *bdp;
-	volatile fec_t *fecp;
+	struct fec_enet_private *fep = netdev_priv(dev);
+	struct bufdesc *bdp;
 	int i;
 
-	fep = netdev_priv(dev);
-	fecp = fep->hwp;
-
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = 1;
+	/* Whack a reset.  We should wait for this. */
+	writel(1, fep->hwp + FEC_ECNTRL);
 	udelay(10);
 
-	/* Clear any outstanding interrupt.
-	*/
-	fecp->fec_ievent = 0xffc00000;
+	/* Clear any outstanding interrupt. */
+	writel(0xffc00000, fep->hwp + FEC_IEVENT);
 
-	/* Set station address.
-	*/
-	fec_set_mac_address(dev);
+	/* Reset all multicast.	*/
+	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
+	writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
+#ifndef CONFIG_M5272
+	writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
+	writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
+#endif
 
-	/* Reset all multicast.
-	*/
-	fecp->fec_grp_hash_table_high = 0;
-	fecp->fec_grp_hash_table_low = 0;
+	/* Set maximum receive buffer size. */
+	writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
 
-	/* Set maximum receive buffer size.
-	*/
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fecp->fec_r_des_start = fep->bd_dma;
-	fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
-				* RX_RING_SIZE;
+	/* Set receive and transmit descriptor base. */
+	writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
+	writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE,
+			fep->hwp + FEC_X_DES_START);
 
 	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
 	fep->cur_rx = fep->rx_bd_base;
 
-	/* Reset SKB transmit buffers.
-	*/
+	/* Reset SKB transmit buffers. */
 	fep->skb_cur = fep->skb_dirty = 0;
-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
-		if (fep->tx_skbuff[i] != NULL) {
+	for (i = 0; i <= TX_RING_MOD_MASK; i++) {
+		if (fep->tx_skbuff[i]) {
 			dev_kfree_skb_any(fep->tx_skbuff[i]);
 			fep->tx_skbuff[i] = NULL;
 		}
 	}
 
-	/* Initialize the receive buffer descriptors.
-	*/
+	/* Initialize the receive buffer descriptors. */
 	bdp = fep->rx_bd_base;
-	for (i=0; i<RX_RING_SIZE; i++) {
+	for (i = 0; i < RX_RING_SIZE; i++) {
 
-		/* Initialize the BD for every fragment in the page.
-		*/
+		/* Initialize the BD for every fragment in the page. */
 		bdp->cbd_sc = BD_ENET_RX_EMPTY;
 		bdp++;
 	}
 
-	/* Set the last buffer to wrap.
-	*/
+	/* Set the last buffer to wrap */
 	bdp--;
 	bdp->cbd_sc |= BD_SC_WRAP;
 
-	/* ...and the same for transmmit.
-	*/
+	/* ...and the same for transmit */
 	bdp = fep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
+	for (i = 0; i < TX_RING_SIZE; i++) {
 
-		/* Initialize the BD for every fragment in the page.
-		*/
+		/* Initialize the BD for every fragment in the page. */
 		bdp->cbd_sc = 0;
 		bdp->cbd_bufaddr = 0;
 		bdp++;
 	}
 
-	/* Set the last buffer to wrap.
-	*/
+	/* Set the last buffer to wrap */
 	bdp--;
 	bdp->cbd_sc |= BD_SC_WRAP;
 
-	/* Enable MII mode.
-	*/
+	/* Enable MII mode */
 	if (duplex) {
-		fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;/* MII enable */
-		fecp->fec_x_cntrl = 0x04;		  /* FD enable */
+		/* MII enable / FD enable */
+		writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL);
+		writel(0x04, fep->hwp + FEC_X_CNTRL);
 	} else {
-		/* MII enable|No Rcv on Xmit */
-		fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x06;
-		fecp->fec_x_cntrl = 0x00;
+		/* MII enable / No Rcv on Xmit */
+		writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL);
+		writel(0x0, fep->hwp + FEC_X_CNTRL);
 	}
 	fep->full_duplex = duplex;
 
-	/* Set MII speed.
-	*/
-	fecp->fec_mii_speed = fep->phy_speed;
+	/* Set MII speed */
+	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
-	/* And last, enable the transmit and receive processing.
-	*/
-	fecp->fec_ecntrl = 2;
-	fecp->fec_r_des_active = 0;
+	/* And last, enable the transmit and receive processing */
+	writel(2, fep->hwp + FEC_ECNTRL);
+	writel(0, fep->hwp + FEC_R_DES_ACTIVE);
 
-	/* Enable interrupts we wish to service.
-	*/
-	fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
+	/* Enable interrupts we wish to service */
+	writel(FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII,
+			fep->hwp + FEC_IMASK);
 }
 
 static void
 fec_stop(struct net_device *dev)
 {
-	volatile fec_t *fecp;
-	struct fec_enet_private *fep;
-
-	fep = netdev_priv(dev);
-	fecp = fep->hwp;
+	struct fec_enet_private *fep = netdev_priv(dev);
 
-	/*
-	** We cannot expect a graceful transmit stop without link !!!
-	*/
-	if (fep->link)
-		{
-		fecp->fec_x_cntrl = 0x01;	/* Graceful transmit stop */
+	/* We cannot expect a graceful transmit stop without link !!! */
+	if (fep->link) {
+		writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */
 		udelay(10);
-		if (!(fecp->fec_ievent & FEC_ENET_GRA))
+		if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
 			printk("fec_stop : Graceful transmit stop did not complete !\n");
-		}
+	}
 
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = 1;
+	/* Whack a reset.  We should wait for this. */
+	writel(1, fep->hwp + FEC_ECNTRL);
 	udelay(10);
 
-	/* Clear outstanding MII command interrupts.
-	*/
-	fecp->fec_ievent = FEC_ENET_MII;
+	/* Clear outstanding MII command interrupts. */
+	writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
 
-	fecp->fec_imask = FEC_ENET_MII;
-	fecp->fec_mii_speed = fep->phy_speed;
+	writel(FEC_ENET_MII, fep->hwp + FEC_IMASK);
+	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 }
 
 static int __devinit
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 76c64c92e19..30b7dd67133 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -20,82 +20,55 @@
  *	registers in the same peripheral device on different models
  *	of the ColdFire!
  */
-typedef struct fec {
-	unsigned long	fec_reserved0;
-	unsigned long	fec_ievent;		/* Interrupt event reg */
-	unsigned long	fec_imask;		/* Interrupt mask reg */
-	unsigned long	fec_reserved1;
-	unsigned long	fec_r_des_active;	/* Receive descriptor reg */
-	unsigned long	fec_x_des_active;	/* Transmit descriptor reg */
-	unsigned long	fec_reserved2[3];
-	unsigned long	fec_ecntrl;		/* Ethernet control reg */
-	unsigned long	fec_reserved3[6];
-	unsigned long	fec_mii_data;		/* MII manage frame reg */
-	unsigned long	fec_mii_speed;		/* MII speed control reg */
-	unsigned long	fec_reserved4[7];
-	unsigned long	fec_mib_ctrlstat;	/* MIB control/status reg */
-	unsigned long	fec_reserved5[7];
-	unsigned long	fec_r_cntrl;		/* Receive control reg */
-	unsigned long	fec_reserved6[15];
-	unsigned long	fec_x_cntrl;		/* Transmit Control reg */
-	unsigned long	fec_reserved7[7];
-	unsigned long	fec_addr_low;		/* Low 32bits MAC address */
-	unsigned long	fec_addr_high;		/* High 16bits MAC address */
-	unsigned long	fec_opd;		/* Opcode + Pause duration */
-	unsigned long	fec_reserved8[10];
-	unsigned long	fec_hash_table_high;	/* High 32bits hash table */
-	unsigned long	fec_hash_table_low;	/* Low 32bits hash table */
-	unsigned long	fec_grp_hash_table_high;/* High 32bits hash table */
-	unsigned long	fec_grp_hash_table_low;	/* Low 32bits hash table */
-	unsigned long	fec_reserved9[7];
-	unsigned long	fec_x_wmrk;		/* FIFO transmit water mark */
-	unsigned long	fec_reserved10;
-	unsigned long	fec_r_bound;		/* FIFO receive bound reg */
-	unsigned long	fec_r_fstart;		/* FIFO receive start reg */
-	unsigned long	fec_reserved11[11];
-	unsigned long	fec_r_des_start;	/* Receive descriptor ring */
-	unsigned long	fec_x_des_start;	/* Transmit descriptor ring */
-	unsigned long	fec_r_buff_size;	/* Maximum receive buff size */
-} fec_t;
+#define FEC_IEVENT		0x004 /* Interrupt event reg */
+#define FEC_IMASK		0x008 /* Interrupt mask reg */
+#define FEC_R_DES_ACTIVE	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE	0x014 /* Transmit descriptor reg */
+#define FEC_ECNTRL		0x024 /* Ethernet control reg */
+#define FEC_MII_DATA		0x040 /* MII manage frame reg */
+#define FEC_MII_SPEED		0x044 /* MII speed control reg */
+#define FEC_MIB_CTRLSTAT	0x064 /* MIB control/status reg */
+#define FEC_R_CNTRL		0x084 /* Receive control reg */
+#define FEC_X_CNTRL		0x0c4 /* Transmit Control reg */
+#define FEC_ADDR_LOW		0x0e4 /* Low 32bits MAC address */
+#define FEC_ADDR_HIGH		0x0e8 /* High 16bits MAC address */
+#define FEC_OPD			0x0ec /* Opcode + Pause duration */
+#define FEC_HASH_TABLE_HIGH	0x118 /* High 32bits hash table */
+#define FEC_HASH_TABLE_LOW	0x11c /* Low 32bits hash table */
+#define FEC_GRP_HASH_TABLE_HIGH	0x120 /* High 32bits hash table */
+#define FEC_GRP_HASH_TABLE_LOW	0x124 /* Low 32bits hash table */
+#define FEC_X_WMRK		0x144 /* FIFO transmit water mark */
+#define FEC_R_BOUND		0x14c /* FIFO receive bound reg */
+#define FEC_R_FSTART		0x150 /* FIFO receive start reg */
+#define FEC_R_DES_START		0x180 /* Receive descriptor ring */
+#define FEC_X_DES_START		0x184 /* Transmit descriptor ring */
+#define FEC_R_BUFF_SIZE		0x188 /* Maximum receive buff size */
 
 #else
 
-/*
- *	Define device register set address map.
- */
-typedef struct fec {
-	unsigned long	fec_ecntrl;		/* Ethernet control reg */
-	unsigned long	fec_ievent;		/* Interrupt even reg */
-	unsigned long	fec_imask;		/* Interrupt mask reg */
-	unsigned long	fec_ivec;		/* Interrupt vec status reg */
-	unsigned long	fec_r_des_active;	/* Receive descriptor reg */
-	unsigned long	fec_x_des_active;	/* Transmit descriptor reg */
-	unsigned long	fec_reserved1[10];
-	unsigned long	fec_mii_data;		/* MII manage frame reg */
-	unsigned long	fec_mii_speed;		/* MII speed control reg */
-	unsigned long	fec_reserved2[17];
-	unsigned long	fec_r_bound;		/* FIFO receive bound reg */
-	unsigned long	fec_r_fstart;		/* FIFO receive start reg */
-	unsigned long	fec_reserved3[4];
-	unsigned long	fec_x_wmrk;		/* FIFO transmit water mark */
-	unsigned long	fec_reserved4;
-	unsigned long	fec_x_fstart;		/* FIFO transmit start reg */
-	unsigned long	fec_reserved5[21];
-	unsigned long	fec_r_cntrl;		/* Receive control reg */
-	unsigned long	fec_max_frm_len;	/* Maximum frame length reg */
-	unsigned long	fec_reserved6[14];
-	unsigned long	fec_x_cntrl;		/* Transmit Control reg */
-	unsigned long	fec_reserved7[158];
-	unsigned long	fec_addr_low;		/* Low 32bits MAC address */
-	unsigned long	fec_addr_high;		/* High 16bits MAC address */
-	unsigned long	fec_grp_hash_table_high;/* High 32bits hash table */
-	unsigned long	fec_grp_hash_table_low;	/* Low 32bits hash table */
-	unsigned long	fec_r_des_start;	/* Receive descriptor ring */
-	unsigned long	fec_x_des_start;	/* Transmit descriptor ring */
-	unsigned long	fec_r_buff_size;	/* Maximum receive buff size */
-	unsigned long	reserved8[9];
-	unsigned long	fec_fifo_ram[112];	/* FIFO RAM buffer */
-} fec_t;
+#define FEC_ECNTRL;		0x000 /* Ethernet control reg */
+#define FEC_IEVENT;		0x004 /* Interrupt even reg */
+#define FEC_IMASK;		0x008 /* Interrupt mask reg */
+#define FEC_IVEC;		0x00c /* Interrupt vec status reg */
+#define FEC_R_DES_ACTIVE;	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE;	0x01c /* Transmit descriptor reg */
+#define FEC_MII_DATA		0x040 /* MII manage frame reg */
+#define FEC_MII_SPEED		0x044 /* MII speed control reg */
+#define FEC_R_BOUND		0x08c /* FIFO receive bound reg */
+#define FEC_R_FSTART		0x090 /* FIFO receive start reg */
+#define FEC_X_WMRK		0x0a4 /* FIFO transmit water mark */
+#define FEC_X_FSTART		0x0ac /* FIFO transmit start reg */
+#define FEC_R_CNTRL		0x104 /* Receive control reg */
+#define FEC_MAX_FRM_LEN		0x108 /* Maximum frame length reg */
+#define FEC_X_CNTRL		0x144 /* Transmit Control reg */
+#define FEC_ADDR_LOW		0x3c0 /* Low 32bits MAC address */
+#define FEC_ADDR_HIGH		0x3c4 /* High 16bits MAC address */
+#define FEC_GRP_HASH_TABLE_HIGH	0x3c8 /* High 32bits hash table */
+#define FEC_GRP_HASH_TABLE_LOW	0x3cc /* Low 32bits hash table */
+#define FEC_R_DES_START		0x3d0 /* Receive descriptor ring */
+#define FEC_X_DES_START		0x3d4 /* Transmit descriptor ring */
+#define FEC_R_BUFF_SIZE		0x3d8 /* Maximum receive buff size */
+#define FEC_FIFO_RAM		0x400 /* FIFO RAM buffer */
 
 #endif /* CONFIG_M5272 */
 
@@ -104,17 +77,17 @@ typedef struct fec {
  *	Define the buffer descriptor structure.
  */
 #ifdef CONFIG_ARCH_MXC
-typedef struct bufdesc {
+struct bufdesc {
 	unsigned short cbd_datlen;	/* Data length */
 	unsigned short cbd_sc;	/* Control and status info */
 	unsigned long cbd_bufaddr;	/* Buffer address */
-} cbd_t;
+};
 #else
-typedef struct bufdesc {
+struct bufdesc {
 	unsigned short	cbd_sc;			/* Control and status info */
 	unsigned short	cbd_datlen;		/* Data length */
 	unsigned long	cbd_bufaddr;		/* Buffer address */
-} cbd_t;
+};
 #endif
 
 /*
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 8bbe7f61799..7d443405bbe 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -25,6 +25,7 @@
 #include <linux/hardirq.h>
 #include <linux/delay.h>
 #include <linux/of_device.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <linux/netdevice.h>
@@ -43,11 +44,9 @@
 
 #define DRIVER_NAME "mpc52xx-fec"
 
-#define FEC5200_PHYADDR_NONE	(-1)
-#define FEC5200_PHYADDR_7WIRE	(-2)
-
 /* Private driver data structure */
 struct mpc52xx_fec_priv {
+	struct net_device *ndev;
 	int duplex;
 	int speed;
 	int r_irq;
@@ -59,10 +58,11 @@ struct mpc52xx_fec_priv {
 	int msg_enable;
 
 	/* MDIO link details */
-	int phy_addr;
-	unsigned int phy_speed;
+	unsigned int mdio_speed;
+	struct device_node *phy_node;
 	struct phy_device *phydev;
 	enum phy_state link;
+	int seven_wire_mode;
 };
 
 
@@ -211,85 +211,25 @@ static void mpc52xx_fec_adjust_link(struct net_device *dev)
 		phy_print_status(phydev);
 }
 
-static int mpc52xx_fec_init_phy(struct net_device *dev)
-{
-	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
-	struct phy_device *phydev;
-	char phy_id[BUS_ID_SIZE];
-
-	snprintf(phy_id, sizeof(phy_id), "%x:%02x",
-			(unsigned int)dev->base_addr, priv->phy_addr);
-
-	priv->link = PHY_DOWN;
-	priv->speed = 0;
-	priv->duplex = -1;
-
-	phydev = phy_connect(dev, phy_id, &mpc52xx_fec_adjust_link, 0, PHY_INTERFACE_MODE_MII);
-	if (IS_ERR(phydev)) {
-		dev_err(&dev->dev, "phy_connect failed\n");
-		return PTR_ERR(phydev);
-	}
-	dev_info(&dev->dev, "attached phy %i to driver %s\n",
-			phydev->addr, phydev->drv->name);
-
-	priv->phydev = phydev;
-
-	return 0;
-}
-
-static int mpc52xx_fec_phy_start(struct net_device *dev)
-{
-	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
-	int err;
-
-	if (priv->phy_addr < 0)
-		return 0;
-
-	err = mpc52xx_fec_init_phy(dev);
-	if (err) {
-		dev_err(&dev->dev, "mpc52xx_fec_init_phy failed\n");
-		return err;
-	}
-
-	/* reset phy - this also wakes it from PDOWN */
-	phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
-	phy_start(priv->phydev);
-
-	return 0;
-}
-
-static void mpc52xx_fec_phy_stop(struct net_device *dev)
-{
-	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
-
-	if (!priv->phydev)
-		return;
-
-	phy_disconnect(priv->phydev);
-	/* power down phy */
-	phy_stop(priv->phydev);
-	phy_write(priv->phydev, MII_BMCR, BMCR_PDOWN);
-}
-
-static void mpc52xx_fec_phy_hw_init(struct mpc52xx_fec_priv *priv)
-{
-	struct mpc52xx_fec __iomem *fec = priv->fec;
-
-	if (priv->phydev)
-		return;
-
-	out_be32(&fec->mii_speed, priv->phy_speed);
-}
-
 static int mpc52xx_fec_open(struct net_device *dev)
 {
 	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 	int err = -EBUSY;
 
+	if (priv->phy_node) {
+		priv->phydev = of_phy_connect(priv->ndev, priv->phy_node,
+					      mpc52xx_fec_adjust_link, 0, 0);
+		if (!priv->phydev) {
+			dev_err(&dev->dev, "of_phy_connect failed\n");
+			return -ENODEV;
+		}
+		phy_start(priv->phydev);
+	}
+
 	if (request_irq(dev->irq, &mpc52xx_fec_interrupt, IRQF_SHARED,
 	                DRIVER_NAME "_ctrl", dev)) {
 		dev_err(&dev->dev, "ctrl interrupt request failed\n");
-		goto out;
+		goto free_phy;
 	}
 	if (request_irq(priv->r_irq, &mpc52xx_fec_rx_interrupt, 0,
 	                DRIVER_NAME "_rx", dev)) {
@@ -311,10 +251,6 @@ static int mpc52xx_fec_open(struct net_device *dev)
 		goto free_irqs;
 	}
 
-	err = mpc52xx_fec_phy_start(dev);
-	if (err)
-		goto free_skbs;
-
 	bcom_enable(priv->rx_dmatsk);
 	bcom_enable(priv->tx_dmatsk);
 
@@ -324,16 +260,18 @@ static int mpc52xx_fec_open(struct net_device *dev)
 
 	return 0;
 
- free_skbs:
-	mpc52xx_fec_free_rx_buffers(dev, priv->rx_dmatsk);
-
  free_irqs:
 	free_irq(priv->t_irq, dev);
  free_2irqs:
 	free_irq(priv->r_irq, dev);
  free_ctrl_irq:
 	free_irq(dev->irq, dev);
- out:
+ free_phy:
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
 
 	return err;
 }
@@ -352,7 +290,12 @@ static int mpc52xx_fec_close(struct net_device *dev)
 	free_irq(priv->r_irq, dev);
 	free_irq(priv->t_irq, dev);
 
-	mpc52xx_fec_phy_stop(dev);
+	if (priv->phydev) {
+		/* power down phy */
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+		priv->phydev = NULL;
+	}
 
 	return 0;
 }
@@ -696,7 +639,7 @@ static void mpc52xx_fec_hw_init(struct net_device *dev)
 	/* set phy speed.
 	 * this can't be done in phy driver, since it needs to be called
 	 * before fec stuff (even on resume) */
-	mpc52xx_fec_phy_hw_init(priv);
+	out_be32(&fec->mii_speed, priv->mdio_speed);
 }
 
 /**
@@ -732,7 +675,7 @@ static void mpc52xx_fec_start(struct net_device *dev)
 	rcntrl = FEC_RX_BUFFER_SIZE << 16;	/* max frame length */
 	rcntrl |= FEC_RCNTRL_FCE;
 
-	if (priv->phy_addr != FEC5200_PHYADDR_7WIRE)
+	if (!priv->seven_wire_mode)
 		rcntrl |= FEC_RCNTRL_MII_MODE;
 
 	if (priv->duplex == DUPLEX_FULL)
@@ -798,8 +741,6 @@ static void mpc52xx_fec_stop(struct net_device *dev)
 
 	/* Stop FEC */
 	out_be32(&fec->ecntrl, in_be32(&fec->ecntrl) & ~FEC_ECNTRL_ETHER_EN);
-
-	return;
 }
 
 /* reset fec and bestcomm tasks */
@@ -817,9 +758,11 @@ static void mpc52xx_fec_reset(struct net_device *dev)
 
 	mpc52xx_fec_hw_init(dev);
 
-	phy_stop(priv->phydev);
-	phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
-	phy_start(priv->phydev);
+	if (priv->phydev) {
+		phy_stop(priv->phydev);
+		phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
+		phy_start(priv->phydev);
+	}
 
 	bcom_fec_rx_reset(priv->rx_dmatsk);
 	bcom_fec_tx_reset(priv->tx_dmatsk);
@@ -919,8 +862,6 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	struct net_device *ndev;
 	struct mpc52xx_fec_priv *priv = NULL;
 	struct resource mem;
-	struct device_node *phy_node;
-	const phandle *phy_handle;
 	const u32 *prop;
 	int prop_size;
 
@@ -933,6 +874,7 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 		return -ENOMEM;
 
 	priv = netdev_priv(ndev);
+	priv->ndev = ndev;
 
 	/* Reserve FEC control zone */
 	rv = of_address_to_resource(op->node, 0, &mem);
@@ -956,6 +898,7 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	ndev->ethtool_ops	= &mpc52xx_fec_ethtool_ops;
 	ndev->watchdog_timeo	= FEC_WATCHDOG_TIMEOUT;
 	ndev->base_addr		= mem.start;
+	SET_NETDEV_DEV(ndev, &op->dev);
 
 	spin_lock_init(&priv->lock);
 
@@ -1003,14 +946,9 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	 */
 
 	/* Start with safe defaults for link connection */
-	priv->phy_addr = FEC5200_PHYADDR_NONE;
 	priv->speed = 100;
 	priv->duplex = DUPLEX_HALF;
-	priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
-
-	/* the 7-wire property means don't use MII mode */
-	if (of_find_property(op->node, "fsl,7-wire-mode", NULL))
-		priv->phy_addr = FEC5200_PHYADDR_7WIRE;
+	priv->mdio_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
 
 	/* The current speed preconfigures the speed of the MII link */
 	prop = of_get_property(op->node, "current-speed", &prop_size);
@@ -1019,43 +957,23 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 		priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
 	}
 
-	/* If there is a phy handle, setup link to that phy */
-	phy_handle = of_get_property(op->node, "phy-handle", &prop_size);
-	if (phy_handle && (prop_size >= sizeof(phandle))) {
-		phy_node = of_find_node_by_phandle(*phy_handle);
-		prop = of_get_property(phy_node, "reg", &prop_size);
-		if (prop && (prop_size >= sizeof(u32)))
-			if ((*prop >= 0) && (*prop < PHY_MAX_ADDR))
-				priv->phy_addr = *prop;
-		of_node_put(phy_node);
+	/* If there is a phy handle, then get the PHY node */
+	priv->phy_node = of_parse_phandle(op->node, "phy-handle", 0);
+
+	/* the 7-wire property means don't use MII mode */
+	if (of_find_property(op->node, "fsl,7-wire-mode", NULL)) {
+		priv->seven_wire_mode = 1;
+		dev_info(&ndev->dev, "using 7-wire PHY mode\n");
 	}
 
 	/* Hardware init */
 	mpc52xx_fec_hw_init(ndev);
-
 	mpc52xx_fec_reset_stats(ndev);
 
-	SET_NETDEV_DEV(ndev, &op->dev);
-
-	/* Register the new network device */
 	rv = register_netdev(ndev);
 	if (rv < 0)
 		goto probe_error;
 
-	/* Now report the link setup */
-	switch (priv->phy_addr) {
-	 case FEC5200_PHYADDR_NONE:
-		dev_info(&ndev->dev, "Fixed speed MII link: %i%cD\n",
-			 priv->speed, priv->duplex ? 'F' : 'H');
-		break;
-	 case FEC5200_PHYADDR_7WIRE:
-		dev_info(&ndev->dev, "using 7-wire PHY mode\n");
-		break;
-	 default:
-		dev_info(&ndev->dev, "Using PHY at MDIO address %i\n",
-			 priv->phy_addr);
-	}
-
 	/* We're done ! */
 	dev_set_drvdata(&op->dev, ndev);
 
@@ -1065,6 +983,10 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	/* Error handling - free everything that might be allocated */
 probe_error:
 
+	if (priv->phy_node)
+		of_node_put(priv->phy_node);
+	priv->phy_node = NULL;
+
 	irq_dispose_mapping(ndev->irq);
 
 	if (priv->rx_dmatsk)
@@ -1093,6 +1015,10 @@ mpc52xx_fec_remove(struct of_device *op)
 
 	unregister_netdev(ndev);
 
+	if (priv->phy_node)
+		of_node_put(priv->phy_node);
+	priv->phy_node = NULL;
+
 	irq_dispose_mapping(ndev->irq);
 
 	bcom_fec_rx_release(priv->rx_dmatsk);
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index dd9bfa42ac3..fec9f245116 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -14,12 +14,14 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <linux/of_platform.h>
+#include <linux/of_mdio.h>
 #include <asm/io.h>
 #include <asm/mpc52xx.h>
 #include "fec_mpc52xx.h"
 
 struct mpc52xx_fec_mdio_priv {
 	struct mpc52xx_fec __iomem *regs;
+	int mdio_irqs[PHY_MAX_ADDR];
 };
 
 static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
@@ -27,7 +29,7 @@ static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
 {
 	struct mpc52xx_fec_mdio_priv *priv = bus->priv;
 	struct mpc52xx_fec __iomem *fec;
-	int tries = 100;
+	int tries = 3;
 
 	value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
 	value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
@@ -38,7 +40,7 @@ static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id,
 
 	/* wait for it to finish, this takes about 23 us on lite5200b */
 	while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
-		udelay(5);
+		msleep(1);
 
 	if (!tries)
 		return -ETIMEDOUT;
@@ -64,7 +66,6 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
 {
 	struct device *dev = &of->dev;
 	struct device_node *np = of->node;
-	struct device_node *child = NULL;
 	struct mii_bus *bus;
 	struct mpc52xx_fec_mdio_priv *priv;
 	struct resource res = {};
@@ -85,22 +86,7 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
 	bus->write = mpc52xx_fec_mdio_write;
 
 	/* setup irqs */
-	bus->irq = kmalloc(sizeof(bus->irq[0]) * PHY_MAX_ADDR, GFP_KERNEL);
-	if (bus->irq == NULL) {
-		err = -ENOMEM;
-		goto out_free;
-	}
-	for (i=0; i<PHY_MAX_ADDR; i++)
-		bus->irq[i] = PHY_POLL;
-
-	while ((child = of_get_next_child(np, child)) != NULL) {
-		int irq = irq_of_parse_and_map(child, 0);
-		if (irq != NO_IRQ) {
-			const u32 *id = of_get_property(child, "reg", NULL);
-			if (id)
-				bus->irq[*id] = irq;
-		}
-	}
+	bus->irq = priv->mdio_irqs;
 
 	/* setup registers */
 	err = of_address_to_resource(np, 0, &res);
@@ -122,7 +108,7 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
 	out_be32(&priv->regs->mii_speed,
 		((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
 
-	err = mdiobus_register(bus);
+	err = of_mdiobus_register(bus, np);
 	if (err)
 		goto out_unmap;
 
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 9f6a68fb7b4..b60a3041b64 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -77,27 +77,31 @@
  * Hardware access:
  */
 
-#define DEV_NEED_TIMERIRQ          0x000001  /* set the timer irq flag in the irq mask */
-#define DEV_NEED_LINKTIMER         0x000002  /* poll link settings. Relies on the timer irq */
-#define DEV_HAS_LARGEDESC          0x000004  /* device supports jumbo frames and needs packet format 2 */
-#define DEV_HAS_HIGH_DMA           0x000008  /* device supports 64bit dma */
-#define DEV_HAS_CHECKSUM           0x000010  /* device supports tx and rx checksum offloads */
-#define DEV_HAS_VLAN               0x000020  /* device supports vlan tagging and striping */
-#define DEV_HAS_MSI                0x000040  /* device supports MSI */
-#define DEV_HAS_MSI_X              0x000080  /* device supports MSI-X */
-#define DEV_HAS_POWER_CNTRL        0x000100  /* device supports power savings */
-#define DEV_HAS_STATISTICS_V1      0x000200  /* device supports hw statistics version 1 */
-#define DEV_HAS_STATISTICS_V2      0x000600  /* device supports hw statistics version 2 */
-#define DEV_HAS_STATISTICS_V3      0x000e00  /* device supports hw statistics version 3 */
-#define DEV_HAS_TEST_EXTENDED      0x001000  /* device supports extended diagnostic test */
-#define DEV_HAS_MGMT_UNIT          0x002000  /* device supports management unit */
-#define DEV_HAS_CORRECT_MACADDR    0x004000  /* device supports correct mac address order */
-#define DEV_HAS_COLLISION_FIX      0x008000  /* device supports tx collision fix */
-#define DEV_HAS_PAUSEFRAME_TX_V1   0x010000  /* device supports tx pause frames version 1 */
-#define DEV_HAS_PAUSEFRAME_TX_V2   0x020000  /* device supports tx pause frames version 2 */
-#define DEV_HAS_PAUSEFRAME_TX_V3   0x040000  /* device supports tx pause frames version 3 */
-#define DEV_NEED_TX_LIMIT          0x080000  /* device needs to limit tx */
-#define DEV_HAS_GEAR_MODE          0x100000  /* device supports gear mode */
+#define DEV_NEED_TIMERIRQ          0x0000001  /* set the timer irq flag in the irq mask */
+#define DEV_NEED_LINKTIMER         0x0000002  /* poll link settings. Relies on the timer irq */
+#define DEV_HAS_LARGEDESC          0x0000004  /* device supports jumbo frames and needs packet format 2 */
+#define DEV_HAS_HIGH_DMA           0x0000008  /* device supports 64bit dma */
+#define DEV_HAS_CHECKSUM           0x0000010  /* device supports tx and rx checksum offloads */
+#define DEV_HAS_VLAN               0x0000020  /* device supports vlan tagging and striping */
+#define DEV_HAS_MSI                0x0000040  /* device supports MSI */
+#define DEV_HAS_MSI_X              0x0000080  /* device supports MSI-X */
+#define DEV_HAS_POWER_CNTRL        0x0000100  /* device supports power savings */
+#define DEV_HAS_STATISTICS_V1      0x0000200  /* device supports hw statistics version 1 */
+#define DEV_HAS_STATISTICS_V2      0x0000600  /* device supports hw statistics version 2 */
+#define DEV_HAS_STATISTICS_V3      0x0000e00  /* device supports hw statistics version 3 */
+#define DEV_HAS_TEST_EXTENDED      0x0001000  /* device supports extended diagnostic test */
+#define DEV_HAS_MGMT_UNIT          0x0002000  /* device supports management unit */
+#define DEV_HAS_CORRECT_MACADDR    0x0004000  /* device supports correct mac address order */
+#define DEV_HAS_COLLISION_FIX      0x0008000  /* device supports tx collision fix */
+#define DEV_HAS_PAUSEFRAME_TX_V1   0x0010000  /* device supports tx pause frames version 1 */
+#define DEV_HAS_PAUSEFRAME_TX_V2   0x0020000  /* device supports tx pause frames version 2 */
+#define DEV_HAS_PAUSEFRAME_TX_V3   0x0040000  /* device supports tx pause frames version 3 */
+#define DEV_NEED_TX_LIMIT          0x0080000  /* device needs to limit tx */
+#define DEV_NEED_TX_LIMIT2         0x0180000  /* device needs to limit tx, expect for some revs */
+#define DEV_HAS_GEAR_MODE          0x0200000  /* device supports gear mode */
+#define DEV_NEED_PHY_INIT_FIX      0x0400000  /* device needs specific phy workaround */
+#define DEV_NEED_LOW_POWER_FIX     0x0800000  /* device needs special power up workaround */
+#define DEV_NEED_MSI_FIX           0x1000000  /* device needs msi workaround */
 
 enum {
 	NvRegIrqStatus = 0x000,
@@ -343,6 +347,7 @@ enum {
 #define NVREG_POWERSTATE2_POWERUP_MASK		0x0F15
 #define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
 #define NVREG_POWERSTATE2_PHY_RESET		0x0004
+#define NVREG_POWERSTATE2_GATE_CLOCKS		0x0F00
 };
 
 /* Big endian: should work, but is untested */
@@ -1023,6 +1028,23 @@ static int using_multi_irqs(struct net_device *dev)
 		return 1;
 }
 
+static void nv_txrx_gate(struct net_device *dev, bool gate)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+	u32 powerstate;
+
+	if (!np->mac_in_use &&
+	    (np->driver_data & DEV_HAS_POWER_CNTRL)) {
+		powerstate = readl(base + NvRegPowerState2);
+		if (gate)
+			powerstate |= NVREG_POWERSTATE2_GATE_CLOCKS;
+		else
+			powerstate &= ~NVREG_POWERSTATE2_GATE_CLOCKS;
+		writel(powerstate, base + NvRegPowerState2);
+	}
+}
+
 static void nv_enable_irq(struct net_device *dev)
 {
 	struct fe_priv *np = get_nvpriv(dev);
@@ -1253,14 +1275,7 @@ static int phy_init(struct net_device *dev)
 			}
 		}
 		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
-			if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
+			if (np->driver_data & DEV_NEED_PHY_INIT_FIX) {
 				phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
 				phy_reserved |= PHY_REALTEK_INIT7;
 				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
@@ -1451,14 +1466,7 @@ static int phy_init(struct net_device *dev)
 			}
 		}
 		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
-			if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
-			    np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
+			if (np->driver_data & DEV_NEED_PHY_INIT_FIX) {
 				phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
 				phy_reserved |= PHY_REALTEK_INIT7;
 				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
@@ -3403,12 +3411,14 @@ static void nv_linkchange(struct net_device *dev)
 		if (!netif_carrier_ok(dev)) {
 			netif_carrier_on(dev);
 			printk(KERN_INFO "%s: link up.\n", dev->name);
+			nv_txrx_gate(dev, false);
 			nv_start_rx(dev);
 		}
 	} else {
 		if (netif_carrier_ok(dev)) {
 			netif_carrier_off(dev);
 			printk(KERN_INFO "%s: link down.\n", dev->name);
+			nv_txrx_gate(dev, true);
 			nv_stop_rx(dev);
 		}
 	}
@@ -5336,6 +5346,7 @@ static int nv_open(struct net_device *dev)
 	mii_rw(dev, np->phyaddr, MII_BMCR,
 	       mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ) & ~BMCR_PDOWN);
 
+	nv_txrx_gate(dev, false);
 	/* erase previous misconfiguration */
 	if (np->driver_data & DEV_HAS_POWER_CNTRL)
 		nv_mac_reset(dev);
@@ -5523,12 +5534,14 @@ static int nv_close(struct net_device *dev)
 	nv_drain_rxtx(dev);
 
 	if (np->wolenabled || !phy_power_down) {
+		nv_txrx_gate(dev, false);
 		writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
 		nv_start_rx(dev);
 	} else {
 		/* power down phy */
 		mii_rw(dev, np->phyaddr, MII_BMCR,
 		       mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ)|BMCR_PDOWN);
+		nv_txrx_gate(dev, true);
 	}
 
 	/* FIXME: power down nic */
@@ -5821,8 +5834,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		/* take phy and nic out of low power mode */
 		powerstate = readl(base + NvRegPowerState2);
 		powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK;
-		if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) &&
+		if ((id->driver_data & DEV_NEED_LOW_POWER_FIX) &&
 		    pci_dev->revision >= 0xA3)
 			powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3;
 		writel(powerstate, base + NvRegPowerState2);
@@ -5878,14 +5890,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	/* Limit the number of tx's outstanding for hw bug */
 	if (id->driver_data & DEV_NEED_TX_LIMIT) {
 		np->tx_limit = 1;
-		if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
-		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_39) &&
+		if ((id->driver_data & DEV_NEED_TX_LIMIT2) &&
 		    pci_dev->revision >= 0xA2)
 			np->tx_limit = 0;
 	}
@@ -6135,7 +6140,8 @@ static int nv_resume(struct pci_dev *pdev)
 	for (i = 0;i <= np->register_size/sizeof(u32); i++)
 		writel(np->saved_config_space[i], base+i*sizeof(u32));
 
-	pci_write_config_dword(pdev, NV_MSI_PRIV_OFFSET, NV_MSI_PRIV_VALUE);
+	if (np->driver_data & DEV_NEED_MSI_FIX)
+		pci_write_config_dword(pdev, NV_MSI_PRIV_OFFSET, NV_MSI_PRIV_VALUE);
 
 	/* restore phy state, including autoneg */
 	phy_init(dev);
@@ -6184,160 +6190,164 @@ static void nv_shutdown(struct pci_dev *pdev)
 
 static struct pci_device_id pci_tbl[] = {
 	{	/* nForce Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_1),
+		PCI_DEVICE(0x10DE, 0x01C3),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce2 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_2),
+		PCI_DEVICE(0x10DE, 0x0066),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_3),
+		PCI_DEVICE(0x10DE, 0x00D6),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4),
+		PCI_DEVICE(0x10DE, 0x0086),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5),
+		PCI_DEVICE(0x10DE, 0x008C),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6),
+		PCI_DEVICE(0x10DE, 0x00E6),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
 	},
 	{	/* nForce3 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7),
+		PCI_DEVICE(0x10DE, 0x00DF),
 		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM,
 	},
 	{	/* CK804 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8),
+		PCI_DEVICE(0x10DE, 0x0056),
 		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1|DEV_NEED_TX_LIMIT,
 	},
 	{	/* CK804 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9),
+		PCI_DEVICE(0x10DE, 0x0057),
 		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1|DEV_NEED_TX_LIMIT,
 	},
 	{	/* MCP04 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10),
+		PCI_DEVICE(0x10DE, 0x0037),
 		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1|DEV_NEED_TX_LIMIT,
 	},
 	{	/* MCP04 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11),
+		PCI_DEVICE(0x10DE, 0x0038),
 		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1|DEV_NEED_TX_LIMIT,
 	},
 	{	/* MCP51 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1,
+		PCI_DEVICE(0x10DE, 0x0268),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1|DEV_NEED_LOW_POWER_FIX,
 	},
 	{	/* MCP51 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1,
+		PCI_DEVICE(0x10DE, 0x0269),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1|DEV_NEED_LOW_POWER_FIX,
 	},
 	{	/* MCP55 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_NEED_TX_LIMIT,
+		PCI_DEVICE(0x10DE, 0x0372),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_NEED_TX_LIMIT|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP55 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_NEED_TX_LIMIT,
+		PCI_DEVICE(0x10DE, 0x0373),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_NEED_TX_LIMIT|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP61 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_16),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+		PCI_DEVICE(0x10DE, 0x03E5),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP61 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_17),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+		PCI_DEVICE(0x10DE, 0x03E6),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP61 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_18),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+		PCI_DEVICE(0x10DE, 0x03EE),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP61 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_19),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
+		PCI_DEVICE(0x10DE, 0x03EF),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP65 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_20),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0450),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP65 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_21),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0451),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP65 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_22),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0452),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP65 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_23),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0453),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP67 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_24),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x054C),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP67 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_25),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x054D),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP67 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_26),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x054E),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP67 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_27),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x054F),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP73 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_28),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x07DC),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP73 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_29),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x07DD),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP73 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_30),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x07DE),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP73 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_31),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x07DF),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP77 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0760),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP77 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0761),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP77 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0762),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP77 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0763),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP79 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0AB0),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP79 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0AB1),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP79 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0AB2),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
 	},
 	{	/* MCP79 Ethernet Controller */
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		PCI_DEVICE(0x10DE, 0x0AB3),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT2|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX|DEV_NEED_MSI_FIX,
+	},
+	{	/* MCP89 Ethernet Controller */
+		PCI_DEVICE(0x10DE, 0x0D7D),
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE|DEV_NEED_PHY_INIT_FIX,
 	},
 	{0,},
 };
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index a9cbc3191a2..b892c3ad9a7 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -36,6 +36,8 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 
@@ -752,9 +754,10 @@ static int fs_init_phy(struct net_device *dev)
 	fep->oldlink = 0;
 	fep->oldspeed = 0;
 	fep->oldduplex = -1;
-	if(fep->fpi->bus_id)
-		phydev = phy_connect(dev, fep->fpi->bus_id, &fs_adjust_link, 0,
-				PHY_INTERFACE_MODE_MII);
+	if(fep->fpi->phy_node)
+		phydev = of_phy_connect(dev, fep->fpi->phy_node,
+					&fs_adjust_link, 0,
+					PHY_INTERFACE_MODE_MII);
 	else {
 		printk("No phy bus ID specified in BSP code\n");
 		return -EINVAL;
@@ -938,81 +941,6 @@ extern void fs_mii_disconnect(struct net_device *dev);
 
 /**************************************************************************************/
 
-/* handy pointer to the immap */
-void __iomem *fs_enet_immap = NULL;
-
-static int setup_immap(void)
-{
-#ifdef CONFIG_CPM1
-	fs_enet_immap = ioremap(IMAP_ADDR, 0x4000);
-	WARN_ON(!fs_enet_immap);
-#elif defined(CONFIG_CPM2)
-	fs_enet_immap = cpm2_immr;
-#endif
-
-	return 0;
-}
-
-static void cleanup_immap(void)
-{
-#if defined(CONFIG_CPM1)
-	iounmap(fs_enet_immap);
-#endif
-}
-
-/**************************************************************************************/
-
-static int __devinit find_phy(struct device_node *np,
-                              struct fs_platform_info *fpi)
-{
-	struct device_node *phynode, *mdionode;
-	int ret = 0, len, bus_id;
-	const u32 *data;
-
-	data  = of_get_property(np, "fixed-link", NULL);
-	if (data) {
-		snprintf(fpi->bus_id, 16, "%x:%02x", 0, *data);
-		return 0;
-	}
-
-	data = of_get_property(np, "phy-handle", &len);
-	if (!data || len != 4)
-		return -EINVAL;
-
-	phynode = of_find_node_by_phandle(*data);
-	if (!phynode)
-		return -EINVAL;
-
-	data = of_get_property(phynode, "reg", &len);
-	if (!data || len != 4) {
-		ret = -EINVAL;
-		goto out_put_phy;
-	}
-
-	mdionode = of_get_parent(phynode);
-	if (!mdionode) {
-		ret = -EINVAL;
-		goto out_put_phy;
-	}
-
-	bus_id = of_get_gpio(mdionode, 0);
-	if (bus_id < 0) {
-		struct resource res;
-		ret = of_address_to_resource(mdionode, 0, &res);
-		if (ret)
-			goto out_put_mdio;
-		bus_id = res.start;
-	}
-
-	snprintf(fpi->bus_id, 16, "%x:%02x", bus_id, *data);
-
-out_put_mdio:
-	of_node_put(mdionode);
-out_put_phy:
-	of_node_put(phynode);
-	return ret;
-}
-
 #ifdef CONFIG_FS_ENET_HAS_FEC
 #define IS_FEC(match) ((match)->data == &fs_fec_ops)
 #else
@@ -1062,9 +990,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
 	fpi->rx_copybreak = 240;
 	fpi->use_napi = 1;
 	fpi->napi_weight = 17;
-
-	ret = find_phy(ofdev->node, fpi);
-	if (ret)
+	fpi->phy_node = of_parse_phandle(ofdev->node, "phy-handle", 0);
+	if ((!fpi->phy_node) && (!of_get_property(ofdev->node, "fixed-link",
+						  NULL)))
 		goto out_free_fpi;
 
 	privsize = sizeof(*fep) +
@@ -1136,6 +1064,7 @@ out_cleanup_data:
 out_free_dev:
 	free_netdev(ndev);
 	dev_set_drvdata(&ofdev->dev, NULL);
+	of_node_put(fpi->phy_node);
 out_free_fpi:
 	kfree(fpi);
 	return ret;
@@ -1151,7 +1080,7 @@ static int fs_enet_remove(struct of_device *ofdev)
 	fep->ops->free_bd(ndev);
 	fep->ops->cleanup_data(ndev);
 	dev_set_drvdata(fep->dev, NULL);
-
+	of_node_put(fep->fpi->phy_node);
 	free_netdev(ndev);
 	return 0;
 }
@@ -1191,25 +1120,12 @@ static struct of_platform_driver fs_enet_driver = {
 
 static int __init fs_init(void)
 {
-	int r = setup_immap();
-	if (r != 0)
-		return r;
-
-	r = of_register_platform_driver(&fs_enet_driver);
-	if (r != 0)
-		goto out;
-
-	return 0;
-
-out:
-	cleanup_immap();
-	return r;
+	return of_register_platform_driver(&fs_enet_driver);
 }
 
 static void __exit fs_cleanup(void)
 {
 	of_unregister_platform_driver(&fs_enet_driver);
-	cleanup_immap();
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
index 85a4bab7f63..ef01e09781a 100644
--- a/drivers/net/fs_enet/fs_enet.h
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -194,9 +194,4 @@ extern const struct fs_ops fs_scc_ops;
 
 /*******************************************************************/
 
-/* handy pointer to the immap */
-extern void __iomem *fs_enet_immap;
-
-/*******************************************************************/
-
 #endif
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 14e575313c8..ca7bcb8ab3a 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -245,10 +245,6 @@ static void set_multicast_list(struct net_device *dev)
 
 static void restart(struct net_device *dev)
 {
-#ifdef CONFIG_DUET
-	immap_t *immap = fs_enet_immap;
-	u32 cptr;
-#endif
 	struct fs_enet_private *fep = netdev_priv(dev);
 	fec_t __iomem *fecp = fep->fec.fecp;
 	const struct fs_platform_info *fpi = fep->fpi;
@@ -315,36 +311,6 @@ static void restart(struct net_device *dev)
 	FW(fecp, ievent, 0xffc0);
 	FW(fecp, ivec, (virq_to_hw(fep->interrupt) / 2) << 29);
 
-	/*
-	 * adjust to speed (only for DUET & RMII)
-	 */
-#ifdef CONFIG_DUET
-	if (fpi->use_rmii) {
-		cptr = in_be32(&immap->im_cpm.cp_cptr);
-		switch (fs_get_fec_index(fpi->fs_no)) {
-		case 0:
-			cptr |= 0x100;
-			if (fep->speed == 10)
-				cptr |= 0x0000010;
-			else if (fep->speed == 100)
-				cptr &= ~0x0000010;
-			break;
-		case 1:
-			cptr |= 0x80;
-			if (fep->speed == 10)
-				cptr |= 0x0000008;
-			else if (fep->speed == 100)
-				cptr &= ~0x0000008;
-			break;
-		default:
-			BUG();	/* should never happen */
-			break;
-		}
-		out_be32(&immap->im_cpm.cp_cptr, cptr);
-	}
-#endif
-
-
 	FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE);	/* MII enable */
 	/*
 	 * adjust to duplex mode
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
index 49b6645d7e0..93b481b0e3c 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -22,6 +22,7 @@
 #include <linux/mii.h>
 #include <linux/platform_device.h>
 #include <linux/mdio-bitbang.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include "fs_enet.h"
@@ -149,31 +150,12 @@ static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
 	return 0;
 }
 
-static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
-{
-	const u32 *data;
-	int len, id, irq;
-
-	data = of_get_property(np, "reg", &len);
-	if (!data || len != 4)
-		return;
-
-	id = *data;
-	bus->phy_mask &= ~(1 << id);
-
-	irq = of_irq_to_resource(np, 0, NULL);
-	if (irq != NO_IRQ)
-		bus->irq[id] = irq;
-}
-
 static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
-	struct device_node *np = NULL;
 	struct mii_bus *new_bus;
 	struct bb_info *bitbang;
 	int ret = -ENOMEM;
-	int i;
 
 	bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
 	if (!bitbang)
@@ -196,17 +178,10 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
 	if (!new_bus->irq)
 		goto out_unmap_regs;
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		new_bus->irq[i] = -1;
-
-	while ((np = of_get_next_child(ofdev->node, np)))
-		if (!strcmp(np->type, "ethernet-phy"))
-			add_phy(new_bus, np);
-
 	new_bus->parent = &ofdev->dev;
 	dev_set_drvdata(&ofdev->dev, new_bus);
 
-	ret = mdiobus_register(new_bus);
+	ret = of_mdiobus_register(new_bus, ofdev->node);
 	if (ret)
 		goto out_free_irqs;
 
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 28077cc1b94..75a09994d66 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -54,8 +54,7 @@ static int fs_enet_fec_mii_read(struct mii_bus *bus , int phy_id, int location)
 	fec_t __iomem *fecp = fec->fecp;
 	int i, ret = -1;
 
-	if ((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
-		BUG();
+	BUG_ON((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0);
 
 	/* Add PHY address to register command.  */
 	out_be32(&fecp->fec_mii_data, (phy_id << 23) | mk_mii_read(location));
@@ -79,8 +78,7 @@ static int fs_enet_fec_mii_write(struct mii_bus *bus, int phy_id, int location,
 	int i;
 
 	/* this must never happen */
-	if ((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
-		BUG();
+	BUG_ON((in_be32(&fecp->fec_r_cntrl) & FEC_RCNTRL_MII_MODE) == 0);
 
 	/* Add PHY address to register command.  */
 	out_be32(&fecp->fec_mii_data, (phy_id << 23) | mk_mii_write(location, val));
@@ -102,23 +100,6 @@ static int fs_enet_fec_mii_reset(struct mii_bus *bus)
 	return 0;
 }
 
-static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
-{
-	const u32 *data;
-	int len, id, irq;
-
-	data = of_get_property(np, "reg", &len);
-	if (!data || len != 4)
-		return;
-
-	id = *data;
-	bus->phy_mask &= ~(1 << id);
-
-	irq = of_irq_to_resource(np, 0, NULL);
-	if (irq != NO_IRQ)
-		bus->irq[id] = irq;
-}
-
 static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
@@ -165,17 +146,10 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
 	if (!new_bus->irq)
 		goto out_unmap_regs;
 
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		new_bus->irq[i] = -1;
-
-	while ((np = of_get_next_child(ofdev->node, np)))
-		if (!strcmp(np->type, "ethernet-phy"))
-			add_phy(new_bus, np);
-
 	new_bus->parent = &ofdev->dev;
 	dev_set_drvdata(&ofdev->dev, new_bus);
 
-	ret = mdiobus_register(new_bus);
+	ret = of_mdiobus_register(new_bus, ofdev->node);
 	if (ret)
 		goto out_free_irqs;
 
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index aa1eb88c21f..3af581303ca 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -34,6 +34,7 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/of.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
@@ -154,44 +155,6 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
-/* Allocate an array which provides irq #s for each PHY on the given bus */
-static int *create_irq_map(struct device_node *np)
-{
-	int *irqs;
-	int i;
-	struct device_node *child = NULL;
-
-	irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
-
-	if (!irqs)
-		return NULL;
-
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		irqs[i] = PHY_POLL;
-
-	while ((child = of_get_next_child(np, child)) != NULL) {
-		int irq = irq_of_parse_and_map(child, 0);
-		const u32 *id;
-
-		if (irq == NO_IRQ)
-			continue;
-
-		id = of_get_property(child, "reg", NULL);
-
-		if (!id)
-			continue;
-
-		if (*id < PHY_MAX_ADDR && *id >= 0)
-			irqs[*id] = irq;
-		else
-			printk(KERN_WARNING "%s: "
-					"%d is not a valid PHY address\n",
-					np->full_name, *id);
-	}
-
-	return irqs;
-}
-
 void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
 {
 	const u32 *addr;
@@ -315,7 +278,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev,
 
 	new_bus->priv = (void __force *)regs;
 
-	new_bus->irq = create_irq_map(np);
+	new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
 
 	if (NULL == new_bus->irq) {
 		err = -ENOMEM;
@@ -338,13 +301,17 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev,
 			of_device_is_compatible(np, "ucc_geth_phy")) {
 #ifdef CONFIG_UCC_GETH
 		u32 id;
+		static u32 mii_mng_master;
 
 		tbipa = &regs->utbipar;
 
 		if ((err = get_ucc_id_for_range(addr, addr + size, &id)))
 			goto err_free_irqs;
 
-		ucc_set_qe_mux_mii_mng(id - 1);
+		if (!mii_mng_master) {
+			mii_mng_master = id;
+			ucc_set_qe_mux_mii_mng(id - 1);
+		}
 #else
 		err = -ENODEV;
 		goto err_free_irqs;
@@ -384,15 +351,7 @@ static int fsl_pq_mdio_probe(struct of_device *ofdev,
 
 	out_be32(tbipa, tbiaddr);
 
-	/*
-	 * The TBIPHY-only buses will find PHYs at every address,
-	 * so we mask them all but the TBI
-	 */
-	if (of_device_is_compatible(np, "fsl,gianfar-tbi"))
-		new_bus->phy_mask = ~(1 << tbiaddr);
-
-	err = mdiobus_register(new_bus);
-
+	err = of_mdiobus_register(new_bus, np);
 	if (err) {
 		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
 				new_bus->name);
@@ -460,10 +419,10 @@ int __init fsl_pq_mdio_init(void)
 {
 	return of_register_platform_driver(&fsl_pq_mdio_driver);
 }
+module_init(fsl_pq_mdio_init);
 
 void fsl_pq_mdio_exit(void)
 {
 	of_unregister_platform_driver(&fsl_pq_mdio_driver);
 }
-subsys_initcall_sync(fsl_pq_mdio_init);
 module_exit(fsl_pq_mdio_exit);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index a0519184e54..4ae1d259fce 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -75,6 +75,7 @@
 #include <linux/if_vlan.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 #include <linux/ip.h>
 #include <linux/tcp.h>
@@ -168,17 +169,13 @@ static inline int gfar_uses_fcb(struct gfar_private *priv)
 
 static int gfar_of_init(struct net_device *dev)
 {
-	struct device_node *phy, *mdio;
-	const unsigned int *id;
 	const char *model;
 	const char *ctype;
 	const void *mac_addr;
-	const phandle *ph;
 	u64 addr, size;
 	int err = 0;
 	struct gfar_private *priv = netdev_priv(dev);
 	struct device_node *np = priv->node;
-	char bus_name[MII_BUS_ID_SIZE];
 	const u32 *stash;
 	const u32 *stash_len;
 	const u32 *stash_idx;
@@ -264,8 +261,8 @@ static int gfar_of_init(struct net_device *dev)
 	if (of_get_property(np, "fsl,magic-packet", NULL))
 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
 
-	ph = of_get_property(np, "phy-handle", NULL);
-	if (ph == NULL) {
+	priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
+	if (!priv->phy_node) {
 		u32 *fixed_link;
 
 		fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
@@ -273,57 +270,10 @@ static int gfar_of_init(struct net_device *dev)
 			err = -ENODEV;
 			goto err_out;
 		}
-
-		snprintf(priv->phy_bus_id, sizeof(priv->phy_bus_id),
-				PHY_ID_FMT, "0", fixed_link[0]);
-	} else {
-		phy = of_find_node_by_phandle(*ph);
-
-		if (phy == NULL) {
-			err = -ENODEV;
-			goto err_out;
-		}
-
-		mdio = of_get_parent(phy);
-
-		id = of_get_property(phy, "reg", NULL);
-
-		of_node_put(phy);
-
-		fsl_pq_mdio_bus_name(bus_name, mdio);
-		of_node_put(mdio);
-		snprintf(priv->phy_bus_id, sizeof(priv->phy_bus_id), "%s:%02x",
-				bus_name, *id);
 	}
 
 	/* Find the TBI PHY.  If it's not there, we don't support SGMII */
-	ph = of_get_property(np, "tbi-handle", NULL);
-	if (ph) {
-		struct device_node *tbi = of_find_node_by_phandle(*ph);
-		struct of_device *ofdev;
-		struct mii_bus *bus;
-
-		if (!tbi)
-			return 0;
-
-		mdio = of_get_parent(tbi);
-		if (!mdio)
-			return 0;
-
-		ofdev = of_find_device_by_node(mdio);
-
-		of_node_put(mdio);
-
-		id = of_get_property(tbi, "reg", NULL);
-		if (!id)
-			return 0;
-
-		of_node_put(tbi);
-
-		bus = dev_get_drvdata(&ofdev->dev);
-
-		priv->tbiphy = bus->phy_map[*id];
-	}
+	priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
 
 	return 0;
 
@@ -529,6 +479,10 @@ static int gfar_probe(struct of_device *ofdev,
 register_fail:
 	iounmap(priv->regs);
 regs_fail:
+	if (priv->phy_node)
+		of_node_put(priv->phy_node);
+	if (priv->tbi_node)
+		of_node_put(priv->tbi_node);
 	free_netdev(dev);
 	return err;
 }
@@ -537,6 +491,11 @@ static int gfar_remove(struct of_device *ofdev)
 {
 	struct gfar_private *priv = dev_get_drvdata(&ofdev->dev);
 
+	if (priv->phy_node)
+		of_node_put(priv->phy_node);
+	if (priv->tbi_node)
+		of_node_put(priv->tbi_node);
+
 	dev_set_drvdata(&ofdev->dev, NULL);
 
 	iounmap(priv->regs);
@@ -690,7 +649,6 @@ static int init_phy(struct net_device *dev)
 	uint gigabit_support =
 		priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
 		SUPPORTED_1000baseT_Full : 0;
-	struct phy_device *phydev;
 	phy_interface_t interface;
 
 	priv->oldlink = 0;
@@ -699,21 +657,21 @@ static int init_phy(struct net_device *dev)
 
 	interface = gfar_get_interface(dev);
 
-	phydev = phy_connect(dev, priv->phy_bus_id, &adjust_link, 0, interface);
+	if (priv->phy_node) {
+		priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
+					      0, interface);
+		if (!priv->phydev) {
+			dev_err(&dev->dev, "error: Could not attach to PHY\n");
+			return -ENODEV;
+		}
+	}
 
 	if (interface == PHY_INTERFACE_MODE_SGMII)
 		gfar_configure_serdes(dev);
 
-	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
-	}
-
 	/* Remove any features not supported by the controller */
-	phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
-	phydev->advertising = phydev->supported;
-
-	priv->phydev = phydev;
+	priv->phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
+	priv->phydev->advertising = priv->phydev->supported;
 
 	return 0;
 }
@@ -730,10 +688,17 @@ static int init_phy(struct net_device *dev)
 static void gfar_configure_serdes(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct phy_device *tbiphy;
 
-	if (!priv->tbiphy) {
-		printk(KERN_WARNING "SGMII mode requires that the device "
-				"tree specify a tbi-handle\n");
+	if (!priv->tbi_node) {
+		dev_warn(&dev->dev, "error: SGMII mode requires that the "
+				    "device tree specify a tbi-handle\n");
+		return;
+	}
+
+	tbiphy = of_phy_find_device(priv->tbi_node);
+	if (!tbiphy) {
+		dev_err(&dev->dev, "error: Could not get TBI device\n");
 		return;
 	}
 
@@ -743,17 +708,17 @@ static void gfar_configure_serdes(struct net_device *dev)
 	 * everything for us?  Resetting it takes the link down and requires
 	 * several seconds for it to come back.
 	 */
-	if (phy_read(priv->tbiphy, MII_BMSR) & BMSR_LSTATUS)
+	if (phy_read(tbiphy, MII_BMSR) & BMSR_LSTATUS)
 		return;
 
 	/* Single clk mode, mii mode off(for serdes communication) */
-	phy_write(priv->tbiphy, MII_TBICON, TBICON_CLK_SELECT);
+	phy_write(tbiphy, MII_TBICON, TBICON_CLK_SELECT);
 
-	phy_write(priv->tbiphy, MII_ADVERTISE,
+	phy_write(tbiphy, MII_ADVERTISE,
 			ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
 			ADVERTISE_1000XPSE_ASYM);
 
-	phy_write(priv->tbiphy, MII_BMCR, BMCR_ANENABLE |
+	phy_write(tbiphy, MII_BMCR, BMCR_ANENABLE |
 			BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000);
 }
 
@@ -1242,7 +1207,8 @@ static int gfar_enet_open(struct net_device *dev)
 static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb)
 {
 	struct txfcb *fcb = (struct txfcb *)skb_push(skb, GMAC_FCB_LEN);
-	cacheable_memzero(fcb, GMAC_FCB_LEN);
+
+	memset(fcb, 0, GMAC_FCB_LEN);
 
 	return fcb;
 }
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index cf352961ae9..2cd94338b5d 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -779,7 +779,8 @@ struct gfar_private {
 	spinlock_t bflock;
 
 	phy_interface_t interface;
-	char	phy_bus_id[BUS_ID_SIZE];
+	struct device_node *phy_node;
+	struct device_node *tbi_node;
 	u32 device_flags;
 	unsigned char rx_csum_enable:1,
 		extended_hash:1,
@@ -793,7 +794,6 @@ struct gfar_private {
 
 	/* PHY stuff */
 	struct phy_device *phydev;
-	struct phy_device *tbiphy;
 	struct mii_bus *mii_bus;
 	int oldspeed;
 	int oldduplex;
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 310ee035067..9d5b62cb30f 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -1163,7 +1163,7 @@ static void hamachi_tx_timeout(struct net_device *dev)
 	hmp->rx_ring[RX_RING_SIZE-1].status_n_length |= cpu_to_le32(DescEndRing);
 
 	/* Trigger an immediate transmit demand. */
-	dev->trans_start = jiffies;
+	dev->trans_start = jiffies; /* prevent tx timeout */
 	hmp->stats.tx_errors++;
 
 	/* Restart the chip's Tx/Rx processes . */
@@ -1280,7 +1280,7 @@ static int hamachi_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		status=readw(hmp->base + TxStatus);
 		if( !(status & 0x0001) || (status & 0x0002))
 			writew(0x0001, hmp->base + TxCmd);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Caution: the write order is important here, set the field
@@ -1364,7 +1364,6 @@ static int hamachi_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		hmp->tx_full = 1;
 		netif_stop_queue(dev);
 	}
-	dev->trans_start = jiffies;
 
 	if (hamachi_debug > 4) {
 		printk(KERN_DEBUG "%s: Hamachi transmit frame #%d queued in slot %d.\n",
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index bb78c11559c..5e4b7afd068 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -777,7 +777,7 @@ static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	}
 	if (bc->skb)
-		return -1;
+		return NETDEV_TX_LOCKED;
 	/* strip KISS byte */
 	if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
 		dev_kfree_skb(skb);
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index d509b371a56..5105548ad50 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -274,7 +274,7 @@ static int bpq_xmit(struct sk_buff *skb, struct net_device *dev)
 		if ((newskb = skb_realloc_headroom(skb, AX25_BPQ_HEADER_LEN)) == NULL) {
 			printk(KERN_WARNING "bpqether: out of memory\n");
 			kfree_skb(skb);
-			return -ENOMEM;
+			return NETDEV_TX_OK;
 		}
 
 		if (skb->sk != NULL)
@@ -294,7 +294,7 @@ static int bpq_xmit(struct sk_buff *skb, struct net_device *dev)
 	if ((dev = bpq_get_ether_dev(dev)) == NULL) {
 		dev->stats.tx_dropped++;
 		kfree_skb(skb);
-		return -ENODEV;
+		return NETDEV_TX_OK;
 	}
 
 	skb->protocol = ax25_type_trans(skb, dev);
diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c
index 61de56e45ee..d034f8ca63c 100644
--- a/drivers/net/hamradio/hdlcdrv.c
+++ b/drivers/net/hamradio/hdlcdrv.c
@@ -409,7 +409,7 @@ static int hdlcdrv_send_packet(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	}
 	if (sm->skb)
-		return -1;
+		return NETDEV_TX_LOCKED;
 	netif_stop_queue(dev);
 	sm->skb = skb;
 	return 0;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 032c0db4c41..fda2fc83e9a 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -531,7 +531,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!netif_running(dev))  {
 		printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	if (netif_queue_stopped(dev)) {
@@ -541,7 +541,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 		 */
 		if (time_before(jiffies, dev->trans_start + 20 * HZ)) {
 			/* 20 sec timeout not reached */
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 
 		printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name,
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index de3f49f991a..8feda9fe829 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2864,7 +2864,7 @@ static int __init hp100_eisa_probe (struct device *gendev)
 	printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name,
 	       dev->base_addr);
 #endif
-	gendev->driver_data = dev;
+	dev_set_drvdata(gendev, dev);
 	return 0;
  out1:
 	free_netdev(dev);
@@ -2873,7 +2873,7 @@ static int __init hp100_eisa_probe (struct device *gendev)
 
 static int __devexit hp100_eisa_remove (struct device *gendev)
 {
-	struct net_device *dev = gendev->driver_data;
+	struct net_device *dev = dev_get_drvdata(gendev);
 	cleanup_dev(dev);
 	return 0;
 }
diff --git a/drivers/net/hplance.c b/drivers/net/hplance.c
index 2e802634d36..3e3528ade25 100644
--- a/drivers/net/hplance.c
+++ b/drivers/net/hplance.c
@@ -71,6 +71,19 @@ static struct dio_driver hplance_driver = {
 	.remove    = __devexit_p(hplance_remove_one),
 };
 
+static const struct net_device_ops hplance_netdev_ops = {
+	.ndo_open		= hplance_open,
+	.ndo_stop		= hplance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= lance_poll,
+#endif
+};
+
 /* Find all the HP Lance boards and initialise them... */
 static int __devinit hplance_init_one(struct dio_dev *d,
 				const struct dio_device_id *ent)
@@ -135,13 +148,7 @@ static void __init hplance_init(struct net_device *dev, struct dio_dev *d)
 
         /* Fill the dev fields */
         dev->base_addr = va;
-        dev->open = &hplance_open;
-        dev->stop = &hplance_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-        dev->poll_controller = lance_poll;
-#endif
-        dev->hard_start_xmit = &lance_start_xmit;
-        dev->set_multicast_list = &lance_set_multicast;
+        dev->netdev_ops = &hplance_netdev_ops;
         dev->dma = 0;
 
         for (i=0; i<6; i++) {
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 806533c831c..beb84213b67 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1484,7 +1484,7 @@ static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
  stop_queue:
 	netif_stop_queue(ndev);
 	DBG2(dev, "stopped TX queue" NL);
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 
 /* Tx lock BHs */
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index c25bc0bc0b2..448098d3b39 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -815,7 +815,7 @@ static int ibmlana_close(struct net_device *dev)
 static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	ibmlana_priv *priv = netdev_priv(dev);
-	int retval = 0, tmplen, addr;
+	int tmplen, addr;
 	unsigned long flags;
 	tda_t tda;
 	int baddr;
@@ -824,7 +824,6 @@ static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
 	   the upper layer is in deep desperation and we simply ignore the frame. */
 
 	if (priv->txusedcnt >= TXBUFCNT) {
-		retval = -EIO;
 		dev->stats.tx_dropped++;
 		goto tx_done;
 	}
@@ -874,7 +873,7 @@ static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&priv->lock, flags);
 tx_done:
 	dev_kfree_skb(skb);
-	return retval;
+	return NETDEV_TX_OK;
 }
 
 /* switch receiver mode. */
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 5c6315df86b..0995c438f28 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1203,6 +1203,20 @@ static unsigned long ibmveth_get_desired_dma(struct vio_dev *vdev)
 	return ret;
 }
 
+static const struct net_device_ops ibmveth_netdev_ops = {
+	.ndo_open		= ibmveth_open,
+	.ndo_stop		= ibmveth_close,
+	.ndo_start_xmit		= ibmveth_start_xmit,
+	.ndo_set_multicast_list	= ibmveth_set_multicast_list,
+	.ndo_do_ioctl		= ibmveth_ioctl,
+	.ndo_change_mtu		= ibmveth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ibmveth_poll_controller,
+#endif
+};
+
 static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
 {
 	int rc, i;
@@ -1241,7 +1255,7 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_
 		return -ENOMEM;
 
 	adapter = netdev_priv(netdev);
-	dev->dev.driver_data = netdev;
+	dev_set_drvdata(&dev->dev, netdev);
 
 	adapter->vdev = dev;
 	adapter->netdev = netdev;
@@ -1265,21 +1279,13 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_
 	memcpy(&adapter->mac_addr, mac_addr_p, 6);
 
 	netdev->irq = dev->irq;
-	netdev->open               = ibmveth_open;
-	netdev->stop               = ibmveth_close;
-	netdev->hard_start_xmit    = ibmveth_start_xmit;
-	netdev->set_multicast_list = ibmveth_set_multicast_list;
-	netdev->do_ioctl           = ibmveth_ioctl;
-	netdev->ethtool_ops           = &netdev_ethtool_ops;
-	netdev->change_mtu         = ibmveth_change_mtu;
+	netdev->netdev_ops = &ibmveth_netdev_ops;
+	netdev->ethtool_ops = &netdev_ethtool_ops;
 	SET_NETDEV_DEV(netdev, &dev->dev);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	netdev->poll_controller = ibmveth_poll_controller;
-#endif
  	netdev->features |= NETIF_F_LLTX;
 	spin_lock_init(&adapter->stats_lock);
 
-	memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
+	memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
 
 	for(i = 0; i<IbmVethNumBufferPools; i++) {
 		struct kobject *kobj = &adapter->rx_buff_pool[i].kobj;
@@ -1335,7 +1341,7 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_
 
 static int __devexit ibmveth_remove(struct vio_dev *dev)
 {
-	struct net_device *netdev = dev->dev.driver_data;
+	struct net_device *netdev = dev_get_drvdata(&dev->dev);
 	struct ibmveth_adapter *adapter = netdev_priv(netdev);
 	int i;
 
@@ -1368,8 +1374,8 @@ static void ibmveth_proc_unregister_driver(void)
 static int ibmveth_show(struct seq_file *seq, void *v)
 {
 	struct ibmveth_adapter *adapter = seq->private;
-	char *current_mac = ((char*) &adapter->netdev->dev_addr);
-	char *firmware_mac = ((char*) &adapter->mac_addr) ;
+	char *current_mac = (char *) adapter->netdev->dev_addr;
+	char *firmware_mac = (char *) &adapter->mac_addr;
 
 	seq_printf(seq, "%s %s\n\n", ibmveth_driver_string, ibmveth_driver_version);
 
@@ -1468,8 +1474,8 @@ const char * buf, size_t count)
 	struct ibmveth_buff_pool *pool = container_of(kobj,
 						      struct ibmveth_buff_pool,
 						      kobj);
-	struct net_device *netdev =
-	    container_of(kobj->parent, struct device, kobj)->driver_data;
+	struct net_device *netdev = dev_get_drvdata(
+	    container_of(kobj->parent, struct device, kobj));
 	struct ibmveth_adapter *adapter = netdev_priv(netdev);
 	long value = simple_strtol(buf, NULL, 10);
 	long rc;
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 60a26300193..96713ef0629 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -156,6 +156,7 @@ static void ifb_setup(struct net_device *dev)
 
 	dev->flags |= IFF_NOARP;
 	dev->flags &= ~IFF_MULTICAST;
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 	random_ether_addr(dev->dev_addr);
 }
 
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index eaf97705036..0f16abab256 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -130,6 +130,7 @@ struct e1000_adv_tx_context_desc {
 #define E1000_ADVTXD_MACLEN_SHIFT    9  /* Adv ctxt desc mac len shift */
 #define E1000_ADVTXD_TUCMD_IPV4    0x00000400  /* IP Packet Type: 1=IPv4 */
 #define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800  /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
 /* IPSec Encrypt Enable for ESP */
 #define E1000_ADVTXD_L4LEN_SHIFT     8  /* Adv ctxt L4LEN shift */
 #define E1000_ADVTXD_MSS_SHIFT      16  /* Adv ctxt MSS shift */
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index ad2d319d0f8..3bda3db73f1 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -289,8 +289,9 @@
 #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
 
 /* Receive Checksum Control */
+#define E1000_RXCSUM_IPOFL     0x00000100   /* IPv4 checksum offload */
 #define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_IPPCSE    0x00001000   /* IP payload checksum enable */
+#define E1000_RXCSUM_CRCOFL    0x00000800   /* CRC32 offload enable */
 #define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */
 
 /* Header split receive */
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index 840782fb573..ed9058eca45 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -140,13 +140,13 @@ static s32 igb_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
 	struct e1000_mbx_info *mbx = &hw->mbx;
 	int countdown = mbx->timeout;
 
-	if (!mbx->ops.check_for_msg)
+	if (!countdown || !mbx->ops.check_for_msg)
 		goto out;
 
 	while (mbx->ops.check_for_msg(hw, mbx_id)) {
+		countdown--;
 		if (!countdown)
 			break;
-		countdown--;
 		udelay(mbx->usec_delay);
 	}
 out:
@@ -165,13 +165,13 @@ static s32 igb_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
 	struct e1000_mbx_info *mbx = &hw->mbx;
 	int countdown = mbx->timeout;
 
-	if (!mbx->ops.check_for_ack)
+	if (!countdown || !mbx->ops.check_for_ack)
 		goto out;
 
 	while (mbx->ops.check_for_ack(hw, mbx_id)) {
+		countdown--;
 		if (!countdown)
 			break;
-		countdown--;
 		udelay(mbx->usec_delay);
 	}
 out:
diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h
index 3228a862031..ebe4b616db8 100644
--- a/drivers/net/igb/e1000_phy.h
+++ b/drivers/net/igb/e1000_phy.h
@@ -80,7 +80,7 @@ s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
 #define IGP02E1000_PM_D3_LPLU             0x0004 /* For all other states */
 #define IGP01E1000_PLHR_SS_DOWNGRADE      0x8000
 #define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
-#define IGP01E1000_PSSR_MDIX              0x0008
+#define IGP01E1000_PSSR_MDIX              0x0800
 #define IGP01E1000_PSSR_SPEED_MASK        0xC000
 #define IGP01E1000_PSSR_SPEED_1000MBPS    0xC000
 #define IGP02E1000_PHY_CHANNEL_NUM        4
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 0bd7728fe46..6e5924511e4 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -142,6 +142,7 @@ enum {
 #define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
 #define E1000_ETQF(_n)  (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
 
+#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
 /* Split and Replication RX Control - RW */
 /*
  * Convenience macros
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 4e8464b9df2..b2c98dea9ee 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -137,11 +137,17 @@ struct igb_buffer {
 	};
 };
 
-struct igb_queue_stats {
+struct igb_tx_queue_stats {
 	u64 packets;
 	u64 bytes;
 };
 
+struct igb_rx_queue_stats {
+	u64 packets;
+	u64 bytes;
+	u64 drops;
+};
+
 struct igb_ring {
 	struct igb_adapter *adapter; /* backlink */
 	void *desc;                  /* descriptor ring memory */
@@ -167,12 +173,13 @@ struct igb_ring {
 	union {
 		/* TX */
 		struct {
-			struct igb_queue_stats tx_stats;
+			struct igb_tx_queue_stats tx_stats;
 			bool detect_tx_hung;
 		};
 		/* RX */
 		struct {
-			struct igb_queue_stats rx_stats;
+			struct igb_rx_queue_stats rx_stats;
+			u64 rx_queue_drops;
 			struct napi_struct napi;
 			int set_itr;
 			struct igb_ring *buddy;
@@ -238,7 +245,6 @@ struct igb_adapter {
 	u64 hw_csum_err;
 	u64 hw_csum_good;
 	u32 alloc_rx_buff_failed;
-	bool rx_csum;
 	u32 gorc;
 	u64 gorc_old;
 	u16 rx_ps_hdr_size;
@@ -286,6 +292,7 @@ struct igb_adapter {
 #define IGB_FLAG_DCA_ENABLED       (1 << 1)
 #define IGB_FLAG_QUAD_PORT_A       (1 << 2)
 #define IGB_FLAG_NEED_CTX_IDX      (1 << 3)
+#define IGB_FLAG_RX_CSUM_DISABLED  (1 << 4)
 
 enum e1000_state_t {
 	__IGB_TESTING,
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 27eae49e79c..9598ac09f4b 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -64,6 +64,7 @@ static const struct igb_stats igb_gstrings_stats[] = {
 	{ "rx_crc_errors", IGB_STAT(stats.crcerrs) },
 	{ "rx_frame_errors", IGB_STAT(net_stats.rx_frame_errors) },
 	{ "rx_no_buffer_count", IGB_STAT(stats.rnbc) },
+	{ "rx_queue_drop_packet_count", IGB_STAT(net_stats.rx_fifo_errors) },
 	{ "rx_missed_errors", IGB_STAT(stats.mpc) },
 	{ "tx_aborted_errors", IGB_STAT(stats.ecol) },
 	{ "tx_carrier_errors", IGB_STAT(stats.tncrs) },
@@ -96,9 +97,10 @@ static const struct igb_stats igb_gstrings_stats[] = {
 };
 
 #define IGB_QUEUE_STATS_LEN \
-	((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues + \
-	 ((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues) * \
-	(sizeof(struct igb_queue_stats) / sizeof(u64)))
+	(((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues)* \
+	  (sizeof(struct igb_rx_queue_stats) / sizeof(u64))) + \
+	 ((((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues) * \
+	  (sizeof(struct igb_tx_queue_stats) / sizeof(u64))))
 #define IGB_GLOBAL_STATS_LEN	\
 	sizeof(igb_gstrings_stats) / sizeof(struct igb_stats)
 #define IGB_STATS_LEN (IGB_GLOBAL_STATS_LEN + IGB_QUEUE_STATS_LEN)
@@ -275,13 +277,17 @@ static int igb_set_pauseparam(struct net_device *netdev,
 static u32 igb_get_rx_csum(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	return adapter->rx_csum;
+	return !(adapter->flags & IGB_FLAG_RX_CSUM_DISABLED);
 }
 
 static int igb_set_rx_csum(struct net_device *netdev, u32 data)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	adapter->rx_csum = data;
+
+	if (data)
+		adapter->flags &= ~IGB_FLAG_RX_CSUM_DISABLED;
+	else
+		adapter->flags |= IGB_FLAG_RX_CSUM_DISABLED;
 
 	return 0;
 }
@@ -293,10 +299,16 @@ static u32 igb_get_tx_csum(struct net_device *netdev)
 
 static int igb_set_tx_csum(struct net_device *netdev, u32 data)
 {
-	if (data)
+	struct igb_adapter *adapter = netdev_priv(netdev);
+
+	if (data) {
 		netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-	else
-		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+		if (adapter->hw.mac.type == e1000_82576)
+			netdev->features |= NETIF_F_SCTP_CSUM;
+	} else {
+		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		                      NETIF_F_SCTP_CSUM);
+	}
 
 	return 0;
 }
@@ -1950,7 +1962,8 @@ static void igb_get_ethtool_stats(struct net_device *netdev,
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	u64 *queue_stat;
-	int stat_count = sizeof(struct igb_queue_stats) / sizeof(u64);
+	int stat_count_tx = sizeof(struct igb_tx_queue_stats) / sizeof(u64);
+	int stat_count_rx = sizeof(struct igb_rx_queue_stats) / sizeof(u64);
 	int j;
 	int i;
 
@@ -1963,14 +1976,14 @@ static void igb_get_ethtool_stats(struct net_device *netdev,
 	for (j = 0; j < adapter->num_tx_queues; j++) {
 		int k;
 		queue_stat = (u64 *)&adapter->tx_ring[j].tx_stats;
-		for (k = 0; k < stat_count; k++)
+		for (k = 0; k < stat_count_tx; k++)
 			data[i + k] = queue_stat[k];
 		i += k;
 	}
 	for (j = 0; j < adapter->num_rx_queues; j++) {
 		int k;
 		queue_stat = (u64 *)&adapter->rx_ring[j].rx_stats;
-		for (k = 0; k < stat_count; k++)
+		for (k = 0; k < stat_count_rx; k++)
 			data[i + k] = queue_stat[k];
 		i += k;
 	}
@@ -2004,6 +2017,8 @@ static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
 			p += ETH_GSTRING_LEN;
 			sprintf(p, "rx_queue_%u_bytes", i);
 			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_drops", i);
+			p += ETH_GSTRING_LEN;
 		}
 /*		BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
 		break;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index e25343588fc..ea17319624a 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -942,6 +942,8 @@ int igb_up(struct igb_adapter *adapter)
 	rd32(E1000_ICR);
 	igb_irq_enable(adapter);
 
+	netif_tx_start_all_queues(adapter->netdev);
+
 	/* Fire a link change interrupt to start the watchdog. */
 	wr32(E1000_ICS, E1000_ICS_LSC);
 	return 0;
@@ -994,6 +996,11 @@ void igb_down(struct igb_adapter *adapter)
 		igb_reset(adapter);
 	igb_clean_all_tx_rings(adapter);
 	igb_clean_all_rx_rings(adapter);
+#ifdef CONFIG_IGB_DCA
+
+	/* since we reset the hardware DCA settings were cleared */
+	igb_setup_dca(adapter);
+#endif
 }
 
 void igb_reinit_locked(struct igb_adapter *adapter)
@@ -1343,6 +1350,9 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
+	if (adapter->hw.mac.type == e1000_82576)
+		netdev->features |= NETIF_F_SCTP_CSUM;
+
 	adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
 
 	/* before reading the NVM, reset the controller to put the device in a
@@ -1390,8 +1400,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 
 	igb_validate_mdi_setting(hw);
 
-	adapter->rx_csum = 1;
-
 	/* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
 	 * enable the ACPI Magic Packet filter
 	 */
@@ -1442,22 +1450,18 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	 * driver. */
 	igb_get_hw_control(adapter);
 
-	/* tell the stack to leave us alone until igb_open() is called */
-	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
-
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
 
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
 #ifdef CONFIG_IGB_DCA
 	if (dca_add_requester(&pdev->dev) == 0) {
 		adapter->flags |= IGB_FLAG_DCA_ENABLED;
 		dev_info(&pdev->dev, "DCA enabled\n");
-		/* Always use CB2 mode, difference is masked
-		 * in the CB driver. */
-		wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
 		igb_setup_dca(adapter);
 	}
 #endif
@@ -1699,6 +1703,8 @@ static int igb_open(struct net_device *netdev)
 	if (test_bit(__IGB_TESTING, &adapter->state))
 		return -EBUSY;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = igb_setup_all_tx_resources(adapter);
 	if (err)
@@ -2231,29 +2237,24 @@ static void igb_configure_rx(struct igb_adapter *adapter)
 		mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
 			 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
 
-
 		wr32(E1000_MRQC, mrqc);
-
-		/* Multiqueue and raw packet checksumming are mutually
-		 * exclusive.  Note that this not the same as TCP/IP
-		 * checksumming, which works fine. */
-		rxcsum = rd32(E1000_RXCSUM);
-		rxcsum |= E1000_RXCSUM_PCSD;
-		wr32(E1000_RXCSUM, rxcsum);
-	} else {
+	} else if (adapter->vfs_allocated_count) {
 		/* Enable multi-queue for sr-iov */
-		if (adapter->vfs_allocated_count)
-			wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ);
-		/* Enable Receive Checksum Offload for TCP and UDP */
-		rxcsum = rd32(E1000_RXCSUM);
-		if (adapter->rx_csum)
-			rxcsum |= E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPPCSE;
-		else
-			rxcsum &= ~(E1000_RXCSUM_TUOFL | E1000_RXCSUM_IPPCSE);
-
-		wr32(E1000_RXCSUM, rxcsum);
+		wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ);
 	}
 
+	/* Enable Receive Checksum Offload for TCP and UDP */
+	rxcsum = rd32(E1000_RXCSUM);
+	/* Disable raw packet checksumming */
+	rxcsum |= E1000_RXCSUM_PCSD;
+
+	if (adapter->hw.mac.type == e1000_82576)
+		/* Enable Receive Checksum Offload for SCTP */
+		rxcsum |= E1000_RXCSUM_CRCOFL;
+
+	/* Don't need to set TUOFL or IPOFL, they default to 1 */
+	wr32(E1000_RXCSUM, rxcsum);
+
 	/* Set the default pool for the PF's first queue */
 	igb_configure_vt_default_pool(adapter);
 
@@ -2661,7 +2662,6 @@ static void igb_watchdog_task(struct work_struct *work)
 			}
 
 			netif_carrier_on(netdev);
-			netif_tx_wake_all_queues(netdev);
 
 			igb_ping_all_vfs(adapter);
 
@@ -2678,7 +2678,6 @@ static void igb_watchdog_task(struct work_struct *work)
 			printk(KERN_INFO "igb: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
 
 			igb_ping_all_vfs(adapter);
 
@@ -2712,6 +2711,8 @@ link_up:
 			 * (Do the reset outside of interrupt context). */
 			adapter->tx_timeout_count++;
 			schedule_work(&adapter->reset_task);
+			/* return immediately since reset is imminent */
+			return;
 		}
 	}
 
@@ -2895,13 +2896,13 @@ static void igb_set_itr(struct igb_adapter *adapter)
 	switch (current_itr) {
 	/* counts and packets in update_itr are dependent on these numbers */
 	case lowest_latency:
-		new_itr = 70000;
+		new_itr = 56;  /* aka 70,000 ints/sec */
 		break;
 	case low_latency:
-		new_itr = 20000; /* aka hwitr = ~200 */
+		new_itr = 196; /* aka 20,000 ints/sec */
 		break;
 	case bulk_latency:
-		new_itr = 4000;
+		new_itr = 980; /* aka 4,000 ints/sec */
 		break;
 	default:
 		break;
@@ -2920,7 +2921,8 @@ set_itr_now:
 		 * by adding intermediate steps when interrupt rate is
 		 * increasing */
 		new_itr = new_itr > adapter->itr ?
-			     min(adapter->itr + (new_itr >> 2), new_itr) :
+			     max((new_itr * adapter->itr) /
+			         (new_itr + (adapter->itr >> 2)), new_itr) :
 			     new_itr;
 		/* Don't write the value here; it resets the adapter's
 		 * internal timer, and causes us to delay far longer than
@@ -2929,7 +2931,7 @@ set_itr_now:
 		 * ends up being correct.
 		 */
 		adapter->itr = new_itr;
-		adapter->rx_ring->itr_val = 1000000000 / (new_itr * 256);
+		adapter->rx_ring->itr_val = new_itr;
 		adapter->rx_ring->set_itr = 1;
 	}
 
@@ -3068,11 +3070,15 @@ static inline bool igb_tx_csum_adv(struct igb_adapter *adapter,
 				tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
 				if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+				else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
+					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
 				break;
 			case cpu_to_be16(ETH_P_IPV6):
 				/* XXX what about other V6 headers?? */
 				if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
 					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+				else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
+					tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
 				break;
 			default:
 				if (unlikely(net_ratelimit()))
@@ -3133,8 +3139,7 @@ static inline int igb_tx_map_adv(struct igb_adapter *adapter,
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
-	buffer_info->dma = map[count];
-	count++;
+	buffer_info->dma = skb_shinfo(skb)->dma_head;
 
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
@@ -3158,7 +3163,7 @@ static inline int igb_tx_map_adv(struct igb_adapter *adapter,
 	tx_ring->buffer_info[i].skb = skb;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
-	return count;
+	return count + 1;
 }
 
 static inline void igb_tx_queue_adv(struct igb_adapter *adapter,
@@ -3338,7 +3343,6 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb,
 	if (count) {
 		igb_tx_queue_adv(adapter, tx_ring, tx_flags, count,
 			         skb->len, hdr_len);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		igb_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 4);
 	} else {
@@ -3582,8 +3586,35 @@ void igb_update_stats(struct igb_adapter *adapter)
 
 	/* Rx Errors */
 
+	if (hw->mac.type != e1000_82575) {
+		u32 rqdpc_tmp;
+		u64 rqdpc_total = 0;
+		int i;
+		/* Read out drops stats per RX queue.  Notice RQDPC (Receive
+		 * Queue Drop Packet Count) stats only gets incremented, if
+		 * the DROP_EN but it set (in the SRRCTL register for that
+		 * queue).  If DROP_EN bit is NOT set, then the some what
+		 * equivalent count is stored in RNBC (not per queue basis).
+		 * Also note the drop count is due to lack of available
+		 * descriptors.
+		 */
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0xFFF;
+			adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp;
+			rqdpc_total += adapter->rx_ring[i].rx_stats.drops;
+		}
+		adapter->net_stats.rx_fifo_errors = rqdpc_total;
+	}
+
+	/* Note RNBC (Receive No Buffers Count) is an not an exact
+	 * drop count as the hardware FIFO might save the day.  Thats
+	 * one of the reason for saving it in rx_fifo_errors, as its
+	 * potentially not a true drop.
+	 */
+	adapter->net_stats.rx_fifo_errors += adapter->stats.rnbc;
+
 	/* RLEC on some newer hardware can be incorrect so build
-	* our own version based on RUC and ROC */
+	 * our own version based on RUC and ROC */
 	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
@@ -3767,11 +3798,15 @@ static void igb_update_tx_dca(struct igb_ring *tx_ring)
 
 static void igb_setup_dca(struct igb_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	int i;
 
 	if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
 		return;
 
+	/* Always use CB2 mode, difference is masked in the CB driver. */
+	wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
+
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		adapter->tx_ring[i].cpu = -1;
 		igb_update_tx_dca(&adapter->tx_ring[i]);
@@ -4434,20 +4469,12 @@ static void igb_receive_skb(struct igb_ring *ring, u8 status,
 	bool vlan_extracted = (adapter->vlgrp && (status & E1000_RXD_STAT_VP));
 
 	skb_record_rx_queue(skb, ring->queue_index);
-	if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
-		if (vlan_extracted)
-			vlan_gro_receive(&ring->napi, adapter->vlgrp,
-			                 le16_to_cpu(rx_desc->wb.upper.vlan),
-			                 skb);
-		else
-			napi_gro_receive(&ring->napi, skb);
-	} else {
-		if (vlan_extracted)
-			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
-			                  le16_to_cpu(rx_desc->wb.upper.vlan));
-		else
-			netif_receive_skb(skb);
-	}
+	if (vlan_extracted)
+		vlan_gro_receive(&ring->napi, adapter->vlgrp,
+		                 le16_to_cpu(rx_desc->wb.upper.vlan),
+		                 skb);
+	else
+		napi_gro_receive(&ring->napi, skb);
 }
 
 static inline void igb_rx_checksum_adv(struct igb_adapter *adapter,
@@ -4456,19 +4483,28 @@ static inline void igb_rx_checksum_adv(struct igb_adapter *adapter,
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Ignore Checksum bit is set or checksum is disabled through ethtool */
-	if ((status_err & E1000_RXD_STAT_IXSM) || !adapter->rx_csum)
+	if ((status_err & E1000_RXD_STAT_IXSM) ||
+	    (adapter->flags & IGB_FLAG_RX_CSUM_DISABLED))
 		return;
 	/* TCP/UDP checksum error bit is set */
 	if (status_err &
 	    (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
+		/*
+		 * work around errata with sctp packets where the TCPE aka
+		 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+		 * packets, (aka let the stack check the crc32c)
+		 */
+		if (!((adapter->hw.mac.type == e1000_82576) &&
+		      (skb->len == 60)))
+			adapter->hw_csum_err++;
 		/* let the stack verify checksum errors */
-		adapter->hw_csum_err++;
 		return;
 	}
 	/* It must be a TCP or UDP packet with a valid checksum */
 	if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
+	dev_dbg(&adapter->pdev->dev, "cksum success: bits %08X\n", status_err);
 	adapter->hw_csum_good++;
 }
 
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c
index 1dcaa690531..ee17a097d1c 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/igbvf/ethtool.c
@@ -133,6 +133,24 @@ static int igbvf_set_pauseparam(struct net_device *netdev,
 	return -EOPNOTSUPP;
 }
 
+static u32 igbvf_get_rx_csum(struct net_device *netdev)
+{
+	struct igbvf_adapter *adapter = netdev_priv(netdev);
+	return !(adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED);
+}
+
+static int igbvf_set_rx_csum(struct net_device *netdev, u32 data)
+{
+	struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+	if (data)
+		adapter->flags &= ~IGBVF_FLAG_RX_CSUM_DISABLED;
+	else
+		adapter->flags |= IGBVF_FLAG_RX_CSUM_DISABLED;
+
+	return 0;
+}
+
 static u32 igbvf_get_tx_csum(struct net_device *netdev)
 {
 	return ((netdev->features & NETIF_F_IP_CSUM) != 0);
@@ -150,8 +168,6 @@ static int igbvf_set_tx_csum(struct net_device *netdev, u32 data)
 static int igbvf_set_tso(struct net_device *netdev, u32 data)
 {
 	struct igbvf_adapter *adapter = netdev_priv(netdev);
-	int i;
-	struct net_device *v_netdev;
 
 	if (data) {
 		netdev->features |= NETIF_F_TSO;
@@ -159,24 +175,10 @@ static int igbvf_set_tso(struct net_device *netdev, u32 data)
 	} else {
 		netdev->features &= ~NETIF_F_TSO;
 		netdev->features &= ~NETIF_F_TSO6;
-		/* disable TSO on all VLANs if they're present */
-		if (!adapter->vlgrp)
-			goto tso_out;
-		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
-			v_netdev = vlan_group_get_device(adapter->vlgrp, i);
-			if (!v_netdev)
-				continue;
-
-			v_netdev->features &= ~NETIF_F_TSO;
-			v_netdev->features &= ~NETIF_F_TSO6;
-			vlan_group_set_device(adapter->vlgrp, i, v_netdev);
-		}
 	}
 
-tso_out:
 	dev_info(&adapter->pdev->dev, "TSO is %s\n",
 	         data ? "Enabled" : "Disabled");
-	adapter->flags |= FLAG_TSO_FORCE;
 	return 0;
 }
 
@@ -517,6 +519,8 @@ static const struct ethtool_ops igbvf_ethtool_ops = {
 	.set_ringparam		= igbvf_set_ringparam,
 	.get_pauseparam		= igbvf_get_pauseparam,
 	.set_pauseparam		= igbvf_set_pauseparam,
+	.get_rx_csum            = igbvf_get_rx_csum,
+	.set_rx_csum            = igbvf_set_rx_csum,
 	.get_tx_csum		= igbvf_get_tx_csum,
 	.set_tx_csum		= igbvf_set_tx_csum,
 	.get_sg			= ethtool_op_get_sg,
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index 4bff35e4687..8e9b67ebbf8 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -45,7 +45,7 @@ struct igbvf_adapter;
 /* Interrupt defines */
 #define IGBVF_START_ITR                 648 /* ~6000 ints/sec */
 
-/* Interrupt modes, as used by the IntMode paramter */
+/* Interrupt modes, as used by the IntMode parameter */
 #define IGBVF_INT_MODE_LEGACY           0
 #define IGBVF_INT_MODE_MSI              1
 #define IGBVF_INT_MODE_MSIX             2
@@ -286,11 +286,7 @@ struct igbvf_info {
 };
 
 /* hardware capability, feature, and workaround flags */
-#define FLAG_HAS_HW_VLAN_FILTER           (1 << 0)
-#define FLAG_HAS_JUMBO_FRAMES             (1 << 1)
-#define FLAG_MSI_ENABLED                  (1 << 2)
-#define FLAG_RX_CSUM_ENABLED              (1 << 3)
-#define FLAG_TSO_FORCE                    (1 << 4)
+#define IGBVF_FLAG_RX_CSUM_DISABLED             (1 << 0)
 
 #define IGBVF_RX_DESC_ADV(R, i)     \
 	(&((((R).desc))[i].rx_desc))
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index b774666ad3c..22aadb7884f 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -58,8 +58,7 @@ static void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
 
 static struct igbvf_info igbvf_vf_info = {
 	.mac                    = e1000_vfadapt,
-	.flags                  = FLAG_HAS_JUMBO_FRAMES
-	                          | FLAG_RX_CSUM_ENABLED,
+	.flags                  = 0,
 	.pba                    = 10,
 	.init_ops               = e1000_init_function_pointers_vf,
 };
@@ -107,8 +106,10 @@ static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Ignore Checksum bit is set or checksum is disabled through ethtool */
-	if ((status_err & E1000_RXD_STAT_IXSM))
+	if ((status_err & E1000_RXD_STAT_IXSM) ||
+	    (adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED))
 		return;
+
 	/* TCP/UDP checksum error bit is set */
 	if (status_err &
 	    (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
@@ -116,6 +117,7 @@ static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
 		adapter->hw_csum_err++;
 		return;
 	}
+
 	/* It must be a TCP or UDP packet with a valid checksum */
 	if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2117,8 +2119,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
-	buffer_info->dma = map[count];
-	count++;
+	buffer_info->dma = skb_shinfo(skb)->dma_head;
 
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
@@ -2142,7 +2143,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 	tx_ring->buffer_info[i].skb = skb;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
-	return count;
+	return count + 1;
 }
 
 static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter,
@@ -2268,7 +2269,6 @@ static int igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
 	if (count) {
 		igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count,
 		                   skb->len, hdr_len);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4);
 	} else {
@@ -2351,15 +2351,6 @@ static int igbvf_change_mtu(struct net_device *netdev, int new_mtu)
 		return -EINVAL;
 	}
 
-	/* Jumbo frame size limits */
-	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
-		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			dev_err(&adapter->pdev->dev,
-			        "Jumbo Frames not supported.\n");
-			return -EINVAL;
-		}
-	}
-
 #define MAX_STD_JUMBO_FRAME_SIZE 9234
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
 		dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index c5593f4665a..e3cfefab670 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -530,7 +530,7 @@ static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
 	 *   case where the checksum is right the higher layers will still
 	 *   drop the packet as appropriate.
 	 */
-	if (eh->h_proto != ntohs(ETH_P_IP))
+	if (eh->h_proto != htons(ETH_P_IP))
 		return;
 
 	ih = (struct iphdr *) ((char *)eh + ETH_HLEN);
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index dd9318f1949..dfc2541bb55 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -514,7 +514,7 @@ enum ipg_regs {
 #define		IPG_DMALIST_ALIGN_PAD	0x07
 #define		IPG_MULTICAST_HASHTABLE_SIZE	0x40
 
-/* Number of miliseconds to wait after issuing a software reset.
+/* Number of milliseconds to wait after issuing a software reset.
  * 0x05 <= IPG_AC_RESETWAIT to account for proper 10Mbps operation.
  */
 #define         IPG_AC_RESETWAIT             0x05
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index e6317557a53..f7638422142 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -17,6 +17,51 @@ config IRTTY_SIR
 
 	  If unsure, say Y.
 
+config BFIN_SIR
+	tristate "Blackfin SIR on UART"
+	depends on BLACKFIN && IRDA
+	default n
+	help
+	  Say Y here if your want to enable SIR function on Blackfin UART
+	  devices.
+
+	  To activate this driver you can start irattach like:
+	  "irattach irda0 -s"
+
+	  Saying M, it will be built as a module named bfin_sir.
+
+	  Note that you need to turn off one of the serial drivers for SIR
+	  to use that UART.
+
+config BFIN_SIR0
+	bool "Blackfin SIR on UART0"
+	depends on BFIN_SIR && !SERIAL_BFIN_UART0
+
+config BFIN_SIR1
+	bool "Blackfin SIR on UART1"
+	depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
+
+config BFIN_SIR2
+	bool "Blackfin SIR on UART2"
+	depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
+
+config BFIN_SIR3
+	bool "Blackfin SIR on UART3"
+	depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
+
+choice
+	prompt "SIR Mode"
+	depends on BFIN_SIR
+	default SIR_BFIN_DMA
+
+config SIR_BFIN_DMA
+	bool "DMA mode"
+	depends on !DMA_UNCACHED_NONE
+
+config SIR_BFIN_PIO
+	bool "PIO mode"
+endchoice
+
 comment "Dongle support"
 
 config DONGLE
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 5d20fde32a2..d82e1e3bd8c 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MCS_FIR)	        += mcs7780.o
 obj-$(CONFIG_AU1000_FIR)	+= au1k_ir.o
 # SIR drivers
 obj-$(CONFIG_IRTTY_SIR)		+= irtty-sir.o	sir-dev.o
+obj-$(CONFIG_BFIN_SIR)		+= bfin_sir.o
 # dongle drivers for SIR drivers
 obj-$(CONFIG_ESI_DONGLE)	+= esi-sir.o
 obj-$(CONFIG_TEKRAM_DONGLE)	+= tekram-sir.o
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 941164076a2..c4361d46659 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/slab.h>
 #include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
@@ -198,6 +199,17 @@ static int au1k_irda_init_iobuf(iobuff_t *io, int size)
 	return io->head ? 0 : -ENOMEM;
 }
 
+static const struct net_device_ops au1k_irda_netdev_ops = {
+	.ndo_open		= au1k_irda_start,
+	.ndo_stop		= au1k_irda_stop,
+	.ndo_start_xmit		= au1k_irda_hard_xmit,
+	.ndo_tx_timeout		= au1k_tx_timeout,
+	.ndo_do_ioctl		= au1k_irda_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int au1k_irda_net_init(struct net_device *dev)
 {
 	struct au1k_private *aup = netdev_priv(dev);
@@ -209,11 +221,7 @@ static int au1k_irda_net_init(struct net_device *dev)
 	if (err)
 		goto out1;
 
-	dev->open = au1k_irda_start;
-	dev->hard_start_xmit = au1k_irda_hard_xmit;
-	dev->stop = au1k_irda_stop;
-	dev->do_ioctl = au1k_irda_ioctl;
-	dev->tx_timeout = au1k_tx_timeout;
+	dev->netdev_ops = &au1k_irda_netdev_ops;
 
 	irda_init_max_qos_capabilies(&aup->qos);
 
@@ -504,13 +512,13 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk(KERN_DEBUG "%s: tx_full\n", dev->name);
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) {
 		printk(KERN_DEBUG "%s: tx_full\n", dev->name);
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	pDB = aup->tx_db_inuse[aup->tx_head];
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
new file mode 100644
index 00000000000..f3eed6a8fba
--- /dev/null
+++ b/drivers/net/irda/bfin_sir.c
@@ -0,0 +1,820 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+#include "bfin_sir.h"
+
+#ifdef CONFIG_SIR_BFIN_DMA
+#define DMA_SIR_RX_XCNT        10
+#define DMA_SIR_RX_YCNT        (PAGE_SIZE / DMA_SIR_RX_XCNT)
+#define DMA_SIR_RX_FLUSH_JIFS  (HZ * 4 / 250)
+#endif
+
+#if ANOMALY_05000447
+static int max_rate = 57600;
+#else
+static int max_rate = 115200;
+#endif
+
+static void turnaround_delay(unsigned long last_jif, int mtt)
+{
+	long ticks;
+
+	mtt = mtt < 10000 ? 10000 : mtt;
+	ticks = 1 + mtt / (USEC_PER_SEC / HZ);
+	schedule_timeout_uninterruptible(ticks);
+}
+
+static void __devinit bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev)
+{
+	int i;
+	struct resource *res;
+
+	for (i = 0; i < pdev->num_resources; i++) {
+		res = &pdev->resource[i];
+		switch (res->flags) {
+		case IORESOURCE_MEM:
+			sp->membase   = (void __iomem *)res->start;
+			break;
+		case IORESOURCE_IRQ:
+			sp->irq = res->start;
+			break;
+		case IORESOURCE_DMA:
+			sp->rx_dma_channel = res->start;
+			sp->tx_dma_channel = res->end;
+			break;
+		default:
+			break;
+		}
+	}
+
+	sp->clk = get_sclk();
+#ifdef CONFIG_SIR_BFIN_DMA
+	sp->tx_done        = 1;
+	init_timer(&(sp->rx_dma_timer));
+#endif
+}
+
+static void bfin_sir_stop_tx(struct bfin_sir_port *port)
+{
+#ifdef CONFIG_SIR_BFIN_DMA
+	disable_dma(port->tx_dma_channel);
+#endif
+
+	while (!(SIR_UART_GET_LSR(port) & THRE)) {
+		cpu_relax();
+		continue;
+	}
+
+	SIR_UART_STOP_TX(port);
+}
+
+static void bfin_sir_enable_tx(struct bfin_sir_port *port)
+{
+	SIR_UART_ENABLE_TX(port);
+}
+
+static void bfin_sir_stop_rx(struct bfin_sir_port *port)
+{
+	SIR_UART_STOP_RX(port);
+}
+
+static void bfin_sir_enable_rx(struct bfin_sir_port *port)
+{
+	SIR_UART_ENABLE_RX(port);
+}
+
+static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
+{
+	int ret = -EINVAL;
+	unsigned int quot;
+	unsigned short val, lsr, lcr;
+	static int utime;
+	int count = 10;
+
+	lcr = WLS(8);
+
+	switch (speed) {
+	case 9600:
+	case 19200:
+	case 38400:
+	case 57600:
+	case 115200:
+
+		quot = (port->clk + (8 * speed)) / (16 * speed)\
+						- ANOMALY_05000230;
+
+		do {
+			udelay(utime);
+			lsr = SIR_UART_GET_LSR(port);
+		} while (!(lsr & TEMT) && count--);
+
+		/* The useconds for 1 bits to transmit */
+		utime = 1000000 / speed + 1;
+
+		/* Clear UCEN bit to reset the UART state machine
+		 * and control registers
+		 */
+		val = SIR_UART_GET_GCTL(port);
+		val &= ~UCEN;
+		SIR_UART_PUT_GCTL(port, val);
+
+		/* Set DLAB in LCR to Access THR RBR IER */
+		SIR_UART_SET_DLAB(port);
+		SSYNC();
+
+		SIR_UART_PUT_DLL(port, quot & 0xFF);
+		SIR_UART_PUT_DLH(port, (quot >> 8) & 0xFF);
+		SSYNC();
+
+		/* Clear DLAB in LCR */
+		SIR_UART_CLEAR_DLAB(port);
+		SSYNC();
+
+		SIR_UART_PUT_LCR(port, lcr);
+
+		val = SIR_UART_GET_GCTL(port);
+		val |= UCEN;
+		SIR_UART_PUT_GCTL(port, val);
+
+		ret = 0;
+		break;
+	default:
+		printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed);
+		break;
+	}
+
+	val = SIR_UART_GET_GCTL(port);
+	/* If not add the 'RPOLC', we can't catch the receive interrupt.
+	 * It's related with the HW layout and the IR transiver.
+	 */
+	val |= IREN | RPOLC;
+	SIR_UART_PUT_GCTL(port, val);
+	return ret;
+}
+
+static int bfin_sir_is_receiving(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	if (!(SIR_UART_GET_IER(port) & ERBFI))
+		return 0;
+	return self->rx_buff.state != OUTSIDE_FRAME;
+}
+
+#ifdef CONFIG_SIR_BFIN_PIO
+static void bfin_sir_tx_chars(struct net_device *dev)
+{
+	unsigned int chr;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	if (self->tx_buff.len != 0) {
+		chr = *(self->tx_buff.data);
+		SIR_UART_PUT_CHAR(port, chr);
+		self->tx_buff.data++;
+		self->tx_buff.len--;
+	} else {
+		self->stats.tx_packets++;
+		self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head;
+		if (self->newspeed) {
+			bfin_sir_set_speed(port, self->newspeed);
+			self->speed = self->newspeed;
+			self->newspeed = 0;
+		}
+		bfin_sir_stop_tx(port);
+		bfin_sir_enable_rx(port);
+		/* I'm hungry! */
+		netif_wake_queue(dev);
+	}
+}
+
+static void bfin_sir_rx_chars(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	unsigned char ch;
+
+	SIR_UART_CLEAR_LSR(port);
+	ch = SIR_UART_GET_CHAR(port);
+	async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
+	dev->last_rx = jiffies;
+}
+
+static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	spin_lock(&self->lock);
+	while ((SIR_UART_GET_LSR(port) & DR))
+		bfin_sir_rx_chars(dev);
+	spin_unlock(&self->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	spin_lock(&self->lock);
+	if (SIR_UART_GET_LSR(port) & THRE)
+		bfin_sir_tx_chars(dev);
+	spin_unlock(&self->lock);
+
+	return IRQ_HANDLED;
+}
+#endif /* CONFIG_SIR_BFIN_PIO */
+
+#ifdef CONFIG_SIR_BFIN_DMA
+static void bfin_sir_dma_tx_chars(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	if (!port->tx_done)
+		return;
+	port->tx_done = 0;
+
+	if (self->tx_buff.len == 0) {
+		self->stats.tx_packets++;
+		if (self->newspeed) {
+			bfin_sir_set_speed(port, self->newspeed);
+			self->speed = self->newspeed;
+			self->newspeed = 0;
+		}
+		bfin_sir_enable_rx(port);
+		port->tx_done = 1;
+		netif_wake_queue(dev);
+		return;
+	}
+
+	blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data),
+		(unsigned long)(self->tx_buff.data+self->tx_buff.len));
+	set_dma_config(port->tx_dma_channel,
+		set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
+			INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8,
+			DMA_SYNC_RESTART));
+	set_dma_start_addr(port->tx_dma_channel,
+		(unsigned long)(self->tx_buff.data));
+	set_dma_x_count(port->tx_dma_channel, self->tx_buff.len);
+	set_dma_x_modify(port->tx_dma_channel, 1);
+	enable_dma(port->tx_dma_channel);
+}
+
+static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+
+	spin_lock(&self->lock);
+	if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) {
+		clear_dma_irqstat(port->tx_dma_channel);
+		bfin_sir_stop_tx(port);
+
+		self->stats.tx_packets++;
+		self->stats.tx_bytes += self->tx_buff.len;
+		self->tx_buff.len = 0;
+		if (self->newspeed) {
+			bfin_sir_set_speed(port, self->newspeed);
+			self->speed = self->newspeed;
+			self->newspeed = 0;
+		}
+		bfin_sir_enable_rx(port);
+		/* I'm hungry! */
+		netif_wake_queue(dev);
+		port->tx_done = 1;
+	}
+	spin_unlock(&self->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void bfin_sir_dma_rx_chars(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	int i;
+
+	SIR_UART_CLEAR_LSR(port);
+
+	for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
+		async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
+}
+
+void bfin_sir_rx_dma_timeout(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	int x_pos, pos;
+	unsigned long flags;
+
+	spin_lock_irqsave(&self->lock, flags);
+	x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel);
+	if (x_pos == DMA_SIR_RX_XCNT)
+		x_pos = 0;
+
+	pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos;
+
+	if (pos > port->rx_dma_buf.tail) {
+		port->rx_dma_buf.tail = pos;
+		bfin_sir_dma_rx_chars(dev);
+		port->rx_dma_buf.head = port->rx_dma_buf.tail;
+	}
+	spin_unlock_irqrestore(&self->lock, flags);
+}
+
+static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	unsigned short irqstat;
+
+	spin_lock(&self->lock);
+
+	port->rx_dma_nrows++;
+	port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows;
+	bfin_sir_dma_rx_chars(dev);
+	if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) {
+		port->rx_dma_nrows = 0;
+		port->rx_dma_buf.tail = 0;
+	}
+	port->rx_dma_buf.head = port->rx_dma_buf.tail;
+
+	irqstat = get_dma_curr_irqstat(port->rx_dma_channel);
+	clear_dma_irqstat(port->rx_dma_channel);
+	spin_unlock(&self->lock);
+
+	mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS);
+	return IRQ_HANDLED;
+}
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev)
+{
+#ifdef CONFIG_SIR_BFIN_DMA
+	dma_addr_t dma_handle;
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+	if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) {
+		dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n");
+		return -EBUSY;
+	}
+
+	if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) {
+		dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n");
+		free_dma(port->rx_dma_channel);
+		return -EBUSY;
+	}
+
+#ifdef CONFIG_SIR_BFIN_DMA
+
+	set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev);
+	set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev);
+
+	port->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
+	port->rx_dma_buf.head = 0;
+	port->rx_dma_buf.tail = 0;
+	port->rx_dma_nrows = 0;
+
+	set_dma_config(port->rx_dma_channel,
+				set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
+									INTR_ON_ROW, DIMENSION_2D,
+									DATA_SIZE_8, DMA_SYNC_RESTART));
+	set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT);
+	set_dma_x_modify(port->rx_dma_channel, 1);
+	set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT);
+	set_dma_y_modify(port->rx_dma_channel, 1);
+	set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf);
+	enable_dma(port->rx_dma_channel);
+
+	port->rx_dma_timer.data = (unsigned long)(dev);
+	port->rx_dma_timer.function = (void *)bfin_sir_rx_dma_timeout;
+
+#else
+
+	if (request_irq(port->irq, bfin_sir_rx_int, IRQF_DISABLED, "BFIN_SIR_RX", dev)) {
+		dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n");
+		return -EBUSY;
+	}
+
+	if (request_irq(port->irq+1, bfin_sir_tx_int, IRQF_DISABLED, "BFIN_SIR_TX", dev)) {
+		dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n");
+		free_irq(port->irq, dev);
+		return -EBUSY;
+	}
+#endif
+
+	return 0;
+}
+
+static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev)
+{
+	unsigned short val;
+
+	bfin_sir_stop_rx(port);
+	SIR_UART_DISABLE_INTS(port);
+
+	val = SIR_UART_GET_GCTL(port);
+	val &= ~(UCEN | IREN | RPOLC);
+	SIR_UART_PUT_GCTL(port, val);
+
+#ifdef CONFIG_SIR_BFIN_DMA
+	disable_dma(port->tx_dma_channel);
+	disable_dma(port->rx_dma_channel);
+	del_timer(&(port->rx_dma_timer));
+	dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0);
+#else
+	free_irq(port->irq+1, dev);
+	free_irq(port->irq, dev);
+#endif
+	free_dma(port->tx_dma_channel);
+	free_dma(port->rx_dma_channel);
+}
+
+#ifdef CONFIG_PM
+static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct bfin_sir_port *sir_port;
+	struct net_device *dev;
+	struct bfin_sir_self *self;
+
+	sir_port = platform_get_drvdata(pdev);
+	if (!sir_port)
+		return 0;
+
+	dev = sir_port->dev;
+	self = netdev_priv(dev);
+	if (self->open) {
+		flush_work(&self->work);
+		bfin_sir_shutdown(self->sir_port, dev);
+		netif_device_detach(dev);
+	}
+
+	return 0;
+}
+static int bfin_sir_resume(struct platform_device *pdev)
+{
+	struct bfin_sir_port *sir_port;
+	struct net_device *dev;
+	struct bfin_sir_self *self;
+	struct bfin_sir_port *port;
+
+	sir_port = platform_get_drvdata(pdev);
+	if (!sir_port)
+		return 0;
+
+	dev = sir_port->dev;
+	self = netdev_priv(dev);
+	port = self->sir_port;
+	if (self->open) {
+		if (self->newspeed) {
+			self->speed = self->newspeed;
+			self->newspeed = 0;
+		}
+		bfin_sir_startup(port, dev);
+		bfin_sir_set_speed(port, 9600);
+		bfin_sir_enable_rx(port);
+		netif_device_attach(dev);
+	}
+	return 0;
+}
+#else
+#define bfin_sir_suspend   NULL
+#define bfin_sir_resume    NULL
+#endif
+
+static void bfin_sir_send_work(struct work_struct *work)
+{
+	struct bfin_sir_self  *self = container_of(work, struct bfin_sir_self, work);
+	struct net_device *dev = self->sir_port->dev;
+	struct bfin_sir_port *port = self->sir_port;
+	unsigned short val;
+	int tx_cnt = 10;
+
+	while (bfin_sir_is_receiving(dev) && --tx_cnt)
+		turnaround_delay(dev->last_rx, self->mtt);
+
+	bfin_sir_stop_rx(port);
+
+	/* To avoid losting RX interrupt, we reset IR function before
+	 * sending data. We also can set the speed, which will
+	 * reset all the UART.
+	 */
+	val = SIR_UART_GET_GCTL(port);
+	val &= ~(IREN | RPOLC);
+	SIR_UART_PUT_GCTL(port, val);
+	SSYNC();
+	val |= IREN | RPOLC;
+	SIR_UART_PUT_GCTL(port, val);
+	SSYNC();
+	/* bfin_sir_set_speed(port, self->speed); */
+
+#ifdef CONFIG_SIR_BFIN_DMA
+	bfin_sir_dma_tx_chars(dev);
+#endif
+	bfin_sir_enable_tx(port);
+	dev->trans_start = jiffies;
+}
+
+static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	int speed = irda_get_next_speed(skb);
+
+	netif_stop_queue(dev);
+
+	self->mtt = irda_get_mtt(skb);
+
+	if (speed != self->speed && speed != -1)
+		self->newspeed = speed;
+
+	self->tx_buff.data = self->tx_buff.head;
+	if (skb->len == 0)
+		self->tx_buff.len = 0;
+	else
+		self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize);
+
+	schedule_work(&self->work);
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+	struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	int ret = 0;
+
+	switch (cmd) {
+	case SIOCSBANDWIDTH:
+		if (capable(CAP_NET_ADMIN)) {
+			if (self->open) {
+				ret = bfin_sir_set_speed(port, rq->ifr_baudrate);
+				bfin_sir_enable_rx(port);
+			} else {
+				dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n");
+				ret = 0;
+			}
+		}
+		break;
+
+	case SIOCSMEDIABUSY:
+		ret = -EPERM;
+		if (capable(CAP_NET_ADMIN)) {
+			irda_device_set_media_busy(dev, TRUE);
+			ret = 0;
+		}
+		break;
+
+	case SIOCGRECEIVING:
+		rq->ifr_receiving = bfin_sir_is_receiving(dev);
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	return ret;
+}
+
+static struct net_device_stats *bfin_sir_stats(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+
+	return &self->stats;
+}
+
+static int bfin_sir_open(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+	struct bfin_sir_port *port = self->sir_port;
+	int err = -ENOMEM;
+
+	self->newspeed = 0;
+	self->speed = 9600;
+
+	spin_lock_init(&self->lock);
+
+	err = bfin_sir_startup(port, dev);
+	if (err)
+		goto err_startup;
+
+	bfin_sir_set_speed(port, 9600);
+
+	self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME);
+	if (!self->irlap)
+		goto err_irlap;
+
+	INIT_WORK(&self->work, bfin_sir_send_work);
+
+	/*
+	 * Now enable the interrupt then start the queue
+	 */
+	self->open = 1;
+	bfin_sir_enable_rx(port);
+
+	netif_start_queue(dev);
+
+	return 0;
+
+err_irlap:
+	self->open = 0;
+	bfin_sir_shutdown(port, dev);
+err_startup:
+	return err;
+}
+
+static int bfin_sir_stop(struct net_device *dev)
+{
+	struct bfin_sir_self *self = netdev_priv(dev);
+
+	flush_work(&self->work);
+	bfin_sir_shutdown(self->sir_port, dev);
+
+	if (self->rxskb) {
+		dev_kfree_skb(self->rxskb);
+		self->rxskb = NULL;
+	}
+
+	/* Stop IrLAP */
+	if (self->irlap) {
+		irlap_close(self->irlap);
+		self->irlap = NULL;
+	}
+
+	netif_stop_queue(dev);
+	self->open = 0;
+
+	return 0;
+}
+
+static int bfin_sir_init_iobuf(iobuff_t *io, int size)
+{
+	io->head = kmalloc(size, GFP_KERNEL);
+	if (!io->head)
+		return -ENOMEM;
+	io->truesize = size;
+	io->in_frame = FALSE;
+	io->state    = OUTSIDE_FRAME;
+	io->data     = io->head;
+	return 0;
+}
+
+static int __devinit bfin_sir_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct bfin_sir_self *self;
+	unsigned int baudrate_mask;
+	struct bfin_sir_port *sir_port;
+	int err;
+
+	if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(per) && \
+				per[pdev->id][3] == pdev->id) {
+		err = peripheral_request_list(per[pdev->id], DRIVER_NAME);
+		if (err)
+			return err;
+	} else {
+		dev_err(&pdev->dev, "Invalid pdev id, please check board file\n");
+		return -ENODEV;
+	}
+
+	err = -ENOMEM;
+	sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL);
+	if (!sir_port)
+		goto err_mem_0;
+
+	bfin_sir_init_ports(sir_port, pdev);
+
+	dev = alloc_irdadev(sizeof(*self));
+	if (!dev)
+		goto err_mem_1;
+
+	self = netdev_priv(dev);
+	self->dev = &pdev->dev;
+	self->sir_port = sir_port;
+	sir_port->dev = dev;
+
+	err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU);
+	if (err)
+		goto err_mem_2;
+	err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME);
+	if (err)
+		goto err_mem_3;
+
+	dev->hard_start_xmit = bfin_sir_hard_xmit;
+	dev->open            = bfin_sir_open;
+	dev->stop            = bfin_sir_stop;
+	dev->do_ioctl        = bfin_sir_ioctl;
+	dev->get_stats       = bfin_sir_stats;
+	dev->irq             = sir_port->irq;
+
+	irda_init_max_qos_capabilies(&self->qos);
+
+	baudrate_mask = IR_9600;
+
+	switch (max_rate) {
+	case 115200:
+		baudrate_mask |= IR_115200;
+	case 57600:
+		baudrate_mask |= IR_57600;
+	case 38400:
+		baudrate_mask |= IR_38400;
+	case 19200:
+		baudrate_mask |= IR_19200;
+	case 9600:
+		break;
+	default:
+		dev_warn(&pdev->dev, "Invalid maximum baud rate, using 9600\n");
+	}
+
+	self->qos.baud_rate.bits &= baudrate_mask;
+
+	self->qos.min_turn_time.bits = 1; /* 10 ms or more */
+
+	irda_qos_bits_to_value(&self->qos);
+
+	err = register_netdev(dev);
+
+	if (err) {
+		kfree(self->tx_buff.head);
+err_mem_3:
+		kfree(self->rx_buff.head);
+err_mem_2:
+		free_netdev(dev);
+err_mem_1:
+		kfree(sir_port);
+err_mem_0:
+		peripheral_free_list(per[pdev->id]);
+	} else
+		platform_set_drvdata(pdev, sir_port);
+
+	return err;
+}
+
+static int __devexit bfin_sir_remove(struct platform_device *pdev)
+{
+	struct bfin_sir_port *sir_port;
+	struct net_device *dev = NULL;
+	struct bfin_sir_self *self;
+
+	sir_port = platform_get_drvdata(pdev);
+	if (!sir_port)
+		return 0;
+	dev = sir_port->dev;
+	self = netdev_priv(dev);
+	unregister_netdev(dev);
+	kfree(self->tx_buff.head);
+	kfree(self->rx_buff.head);
+	free_netdev(dev);
+	kfree(sir_port);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver bfin_ir_driver = {
+	.probe   = bfin_sir_probe,
+	.remove  = __devexit_p(bfin_sir_remove),
+	.suspend = bfin_sir_suspend,
+	.resume  = bfin_sir_resume,
+	.driver  = {
+		.name = DRIVER_NAME,
+	},
+};
+
+static int __init bfin_sir_init(void)
+{
+	return platform_driver_register(&bfin_ir_driver);
+}
+
+static void __exit bfin_sir_exit(void)
+{
+	platform_driver_unregister(&bfin_ir_driver);
+}
+
+module_init(bfin_sir_init);
+module_exit(bfin_sir_exit);
+
+module_param(max_rate, int, 0);
+MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)");
+
+MODULE_AUTHOR("Graf Yang <graf.yang@analog.com>");
+MODULE_DESCRIPTION("Blackfin IrDA driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/bfin_sir.h b/drivers/net/irda/bfin_sir.h
new file mode 100644
index 00000000000..dac71b1f4f9
--- /dev/null
+++ b/drivers/net/irda/bfin_sir.h
@@ -0,0 +1,148 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/irq.h>
+#include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+};
+#endif
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+#define DRIVER_NAME "bfin_sir"
+
+#define SIR_UART_GET_CHAR(port)    bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)     bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_DLH(port)     bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_LCR(port)     bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)    bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_BF54x
+#define SIR_UART_GET_LSR(port)     bfin_read16((port)->membase + OFFSET_LSR)
+#define SIR_UART_GET_IER(port)     bfin_read16((port)->membase + OFFSET_IER_SET)
+#define SIR_UART_SET_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER_SET), v)
+#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
+#define SIR_UART_PUT_LSR(port, v)  bfin_write16(((port)->membase + OFFSET_LSR), v)
+#define SIR_UART_CLEAR_LSR(port)   bfin_write16(((port)->membase + OFFSET_LSR), -1)
+
+#define SIR_UART_SET_DLAB(port)
+#define SIR_UART_CLEAR_DLAB(port)
+
+#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_SET_IER(port, v)
+#define SIR_UART_DISABLE_INTS(port)   SIR_UART_CLEAR_IER(port, 0xF)
+#define SIR_UART_STOP_TX(port)     do { SIR_UART_PUT_LSR(port, TFI); SIR_UART_CLEAR_IER(port, ETBEI); } while (0)
+#define SIR_UART_ENABLE_TX(port)   do { SIR_UART_SET_IER(port, ETBEI); } while (0)
+#define SIR_UART_STOP_RX(port)     do { SIR_UART_CLEAR_IER(port, ERBFI); } while (0)
+#define SIR_UART_ENABLE_RX(port)   do { SIR_UART_SET_IER(port, ERBFI); } while (0)
+#else
+
+#define SIR_UART_GET_IIR(port)     bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_IER(port)     bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+
+#define SIR_UART_SET_DLAB(port)    do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) | DLAB); } while (0)
+#define SIR_UART_CLEAR_DLAB(port)  do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) & ~DLAB); } while (0)
+
+#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_PUT_IER(port, v)
+#define SIR_UART_DISABLE_INTS(port)   SIR_UART_PUT_IER(port, 0)
+#define SIR_UART_STOP_TX(port)     do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ETBEI); } while (0)
+#define SIR_UART_ENABLE_TX(port)   do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ETBEI); } while (0)
+#define SIR_UART_STOP_RX(port)     do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ERBFI); } while (0)
+#define SIR_UART_ENABLE_RX(port)   do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ERBFI); } while (0)
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+#endif
+
+static const unsigned short per[][4] = {
+	/* rx pin      tx pin     NULL  uart_number */
+	{P_UART0_RX, P_UART0_TX,    0,    0},
+	{P_UART1_RX, P_UART1_TX,    0,    1},
+	{P_UART2_RX, P_UART2_TX,    0,    2},
+	{P_UART3_RX, P_UART3_TX,    0,    3},
+};
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 6b6548b9fda..9a0346e751a 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -994,11 +994,11 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
 
   /* change speed pending, wait for its execution */
   if (self->new_speed)
-      return -EBUSY;
+      return NETDEV_TX_BUSY;
 
   /* device stopped (apm) wait for restart */
   if (self->stopped)
-      return -EBUSY;
+      return NETDEV_TX_BUSY;
 
   toshoboe_checkstuck (self);
 
@@ -1049,7 +1049,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
       if (self->txpending)
         {
 	  spin_unlock_irqrestore(&self->spinlock, flags);
-          return -EBUSY;
+          return NETDEV_TX_BUSY;
         }
 
       /* If in SIR mode we need to generate a string of XBOFs */
@@ -1105,7 +1105,7 @@ dumpbufs(skb->data,skb->len,'>');
           ,skb->len, self->ring->tx[self->txs].control, self->txpending);
       toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
       spin_unlock_irqrestore(&self->spinlock, flags);
-      return -EBUSY;
+      return NETDEV_TX_BUSY;
     }
 
   if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_SIRON)
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 006ba23110d..0c0831c03f6 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -389,7 +389,6 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	s32 speed;
 	s16 xbofs;
 	int res, mtt;
-	int	err = 1;	/* Failed */
 
 	IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name);
 
@@ -430,7 +429,6 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 			irda_usb_change_speed_xbofs(self);
 			netdev->trans_start = jiffies;
 			/* Will netif_wake_queue() in callback */
-			err = 0;	/* No error */
 			goto drop;
 		}
 	}
@@ -542,7 +540,7 @@ drop:
 	/* Drop silently the skb and exit */
 	dev_kfree_skb(skb);
 	spin_unlock_irqrestore(&self->lock, flags);
-	return err;		/* Usually 1 */
+	return NETDEV_TX_OK;
 }
 
 /*------------------------------------------------------------------*/
@@ -1859,6 +1857,42 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 	IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__);
 }
 
+#ifdef CONFIG_PM
+/* USB suspend, so power off the transmitter/receiver */
+static int irda_usb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct irda_usb_cb *self = usb_get_intfdata(intf);
+	int i;
+
+	netif_device_detach(self->netdev);
+
+	if (self->tx_urb != NULL)
+		usb_kill_urb(self->tx_urb);
+	if (self->speed_urb != NULL)
+		usb_kill_urb(self->speed_urb);
+	for (i = 0; i < self->max_rx_urb; i++) {
+		if (self->rx_urb[i] != NULL)
+			usb_kill_urb(self->rx_urb[i]);
+	}
+	return 0;
+}
+
+/* Coming out of suspend, so reset hardware */
+static int irda_usb_resume(struct usb_interface *intf)
+{
+	struct irda_usb_cb *self = usb_get_intfdata(intf);
+	int i;
+
+	for (i = 0; i < self->max_rx_urb; i++) {
+		if (self->rx_urb[i] != NULL)
+			usb_submit_urb(self->rx_urb[i], GFP_KERNEL);
+	}
+
+	netif_device_attach(self->netdev);
+	return 0;
+}
+#endif
+
 /*------------------------------------------------------------------*/
 /*
  * USB device callbacks
@@ -1868,6 +1902,10 @@ static struct usb_driver irda_driver = {
 	.probe		= irda_usb_probe,
 	.disconnect	= irda_usb_disconnect,
 	.id_table	= dongles,
+#ifdef CONFIG_PM
+	.suspend	= irda_usb_suspend,
+	.resume		= irda_usb_resume,
+#endif
 };
 
 /************************* MODULE CALLBACKS *************************/
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 9d813bc4502..c3e4e2c435b 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -156,9 +156,6 @@ static int kingsun_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	int wraplen;
 	int ret = 0;
 
-	if (skb == NULL || netdev == NULL)
-		return -EINVAL;
-
 	netif_stop_queue(netdev);
 
 	/* the IRDA wrapping routines don't deal with non linear skb */
@@ -197,7 +194,7 @@ static int kingsun_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	dev_kfree_skb(skb);
 	spin_unlock(&kingsun->lock);
 
-	return ret;
+	return NETDEV_TX_OK;
 }
 
 /* Receive callback function */
diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c
index b6ffe9715b6..d73b8b64fcb 100644
--- a/drivers/net/irda/ks959-sir.c
+++ b/drivers/net/irda/ks959-sir.c
@@ -391,9 +391,6 @@ static int ks959_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	unsigned int wraplen;
 	int ret = 0;
 
-	if (skb == NULL || netdev == NULL)
-		return -EINVAL;
-
 	netif_stop_queue(netdev);
 
 	/* the IRDA wrapping routines don't deal with non linear skb */
@@ -428,7 +425,7 @@ static int ks959_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	dev_kfree_skb(skb);
 	spin_unlock(&kingsun->lock);
 
-	return ret;
+	return NETDEV_TX_OK;
 }
 
 /* Receive callback function */
diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c
index 64df27f2bfd..1ef45ec7442 100644
--- a/drivers/net/irda/ksdazzle-sir.c
+++ b/drivers/net/irda/ksdazzle-sir.c
@@ -304,9 +304,6 @@ static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	unsigned int wraplen;
 	int ret = 0;
 
-	if (skb == NULL || netdev == NULL)
-		return -EINVAL;
-
 	netif_stop_queue(netdev);
 
 	/* the IRDA wrapping routines don't deal with non linear skb */
@@ -341,7 +338,7 @@ static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 	dev_kfree_skb(skb);
 	spin_unlock(&kingsun->lock);
 
-	return ret;
+	return NETDEV_TX_OK;
 }
 
 /* Receive callback function */
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index fac504d0cfd..f4df1001983 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -824,10 +824,6 @@ static int mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 	int wraplen;
 	int ret = 0;
 
-
-	if (skb == NULL || ndev == NULL)
-		return -EINVAL;
-
 	netif_stop_queue(ndev);
 	mcs = netdev_priv(ndev);
 
@@ -870,7 +866,7 @@ static int mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	dev_kfree_skb(skb);
 	spin_unlock_irqrestore(&mcs->lock, flags);
-	return ret;
+	return NETDEV_TX_OK;
 }
 
 static const struct net_device_ops mcs_netdev_ops = {
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index e775338b525..3376a4f39e0 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -14,6 +14,7 @@
  */
 #include <linux/module.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
@@ -797,6 +798,16 @@ static int pxa_irda_init_iobuf(iobuff_t *io, int size)
 	return io->head ? 0 : -ENOMEM;
 }
 
+static const struct net_device_ops pxa_irda_netdev_ops = {
+	.ndo_open		= pxa_irda_start,
+	.ndo_stop		= pxa_irda_stop,
+	.ndo_start_xmit		= pxa_irda_hard_xmit,
+	.ndo_do_ioctl		= pxa_irda_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int pxa_irda_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
@@ -845,10 +856,7 @@ static int pxa_irda_probe(struct platform_device *pdev)
 	if (err)
 		goto err_startup;
 
-	dev->hard_start_xmit	= pxa_irda_hard_xmit;
-	dev->open		= pxa_irda_start;
-	dev->stop		= pxa_irda_stop;
-	dev->do_ioctl		= pxa_irda_ioctl;
+	dev->netdev_ops = &pxa_irda_netdev_ops;
 
 	irda_init_max_qos_capabilies(&si->qos);
 
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 7a2b003954c..2aeb2e6aec1 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/slab.h>
 #include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
@@ -875,6 +876,16 @@ static int sa1100_irda_init_iobuf(iobuff_t *io, int size)
 	return io->head ? 0 : -ENOMEM;
 }
 
+static const struct net_device_ops sa1100_irda_netdev_ops = {
+	.ndo_open		= sa1100_irda_start,
+	.ndo_stop		= sa1100_irda_stop,
+	.ndo_start_xmit		= sa1100_irda_hard_xmit,
+	.ndo_do_ioctl		= sa1100_irda_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int sa1100_irda_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
@@ -913,11 +924,8 @@ static int sa1100_irda_probe(struct platform_device *pdev)
 	if (err)
 		goto err_mem_5;
 
-	dev->hard_start_xmit	= sa1100_irda_hard_xmit;
-	dev->open		= sa1100_irda_start;
-	dev->stop		= sa1100_irda_stop;
-	dev->do_ioctl		= sa1100_irda_ioctl;
-	dev->irq		= IRQ_Ser2ICP;
+	dev->netdev_ops	= &sa1100_irda_netdev_ops;
+	dev->irq	= IRQ_Ser2ICP;
 
 	irda_init_max_qos_capabilies(&si->qos);
 
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index d940809762e..fd0796c3db3 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -607,7 +607,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
 				 * stopped so the network layer will retry after the
 				 * fsm completes and wakes the queue.
 				 */
-				 return 1;
+				 return NETDEV_TX_BUSY;
 			}
 			else if (unlikely(err)) {
 				/* other fatal error - forget the speed change and
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 59d79807b4d..d0797adb5f8 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -2124,7 +2124,7 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
 	while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
 		udelay(1);
 
-	if (count == 0)
+	if (count < 0)
 		IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__);
 }
 
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index cb793c2bade..e44215cb188 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1021,6 +1021,16 @@ static const struct ethtool_ops ops = {
 	.get_link = veth_get_link,
 };
 
+static const struct net_device_ops veth_netdev_ops = {
+	.ndo_open		= veth_open,
+	.ndo_stop		= veth_close,
+	.ndo_start_xmit		= veth_start_xmit,
+	.ndo_change_mtu		= veth_change_mtu,
+	.ndo_set_multicast_list	= veth_set_multicast_list,
+	.ndo_set_mac_address	= NULL,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static struct net_device *veth_probe_one(int vlan,
 		struct vio_dev *vio_dev)
 {
@@ -1067,12 +1077,7 @@ static struct net_device *veth_probe_one(int vlan,
 
 	memcpy(&port->mac_addr, mac_addr, ETH_ALEN);
 
-	dev->open = veth_open;
-	dev->hard_start_xmit = veth_start_xmit;
-	dev->stop = veth_close;
-	dev->change_mtu = veth_change_mtu;
-	dev->set_mac_address = NULL;
-	dev->set_multicast_list = veth_set_multicast_list;
+	dev->netdev_ops = &veth_netdev_ops;
 	SET_ETHTOOL_OPS(dev, &ops);
 
 	SET_NETDEV_DEV(dev, vdev);
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index 11dcda0f453..ff67a84e680 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -192,7 +192,7 @@ ixgb_identify_xpak_vendor(struct ixgb_hw *hw)
 		vendor_name[i] = ixgb_read_phy_reg(hw,
 						   MDIO_PMA_PMD_XPAK_VENDOR_NAME
 						   + i, IXGB_PHY_ADDRESS,
-						   MDIO_PMA_PMD_DID);
+						   MDIO_MMD_PMAPMD);
 	}
 
 	/* Determine the actual vendor */
@@ -1225,15 +1225,15 @@ ixgb_optics_reset(struct ixgb_hw *hw)
 		u16 mdio_reg;
 
 		ixgb_write_phy_reg(hw,
-					MDIO_PMA_PMD_CR1,
-					IXGB_PHY_ADDRESS,
-					MDIO_PMA_PMD_DID,
-					MDIO_PMA_PMD_CR1_RESET);
-
-		mdio_reg = ixgb_read_phy_reg( hw,
-						MDIO_PMA_PMD_CR1,
-						IXGB_PHY_ADDRESS,
-						MDIO_PMA_PMD_DID);
+				   MDIO_CTRL1,
+				   IXGB_PHY_ADDRESS,
+				   MDIO_MMD_PMAPMD,
+				   MDIO_CTRL1_RESET);
+
+		mdio_reg = ixgb_read_phy_reg(hw,
+					     MDIO_CTRL1,
+					     IXGB_PHY_ADDRESS,
+					     MDIO_MMD_PMAPMD);
 	}
 
 	return;
diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h
index 831fe0c58b2..af6ca3aab5a 100644
--- a/drivers/net/ixgb/ixgb_hw.h
+++ b/drivers/net/ixgb/ixgb_hw.h
@@ -29,6 +29,8 @@
 #ifndef _IXGB_HW_H_
 #define _IXGB_HW_H_
 
+#include <linux/mdio.h>
+
 #include "ixgb_osdep.h"
 
 /* Enums */
@@ -507,18 +509,6 @@ typedef enum {
 /* Definitions for the optics devices on the MDIO bus. */
 #define IXGB_PHY_ADDRESS             0x0	/* Single PHY, multiple "Devices" */
 
-/* Standard five-bit Device IDs.  See IEEE 802.3ae, clause 45 */
-#define MDIO_PMA_PMD_DID        0x01
-#define MDIO_WIS_DID            0x02
-#define MDIO_PCS_DID            0x03
-#define MDIO_XGXS_DID           0x04
-
-/* Standard PMA/PMD registers and bit definitions. */
-/* Note: This is a very limited set of definitions,      */
-/* only implemented features are defined.                */
-#define MDIO_PMA_PMD_CR1        0x0000
-#define MDIO_PMA_PMD_CR1_RESET  0x8000
-
 #define MDIO_PMA_PMD_XPAK_VENDOR_NAME       0x803A	/* XPAK/XENPAK devices only */
 
 /* Vendor-specific MDIO registers */
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 4a0826b8f6f..9c897cf86b9 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -266,6 +266,8 @@ ixgb_up(struct ixgb_adapter *adapter)
 	napi_enable(&adapter->napi);
 	ixgb_irq_enable(adapter);
 
+	netif_wake_queue(netdev);
+
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
 	return 0;
@@ -471,10 +473,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_register;
 
-	/* we're going to reset, so assume we have no link for now */
-
+	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
 
 	DPRINTK(PROBE, INFO, "Intel(R) PRO/10GbE Network Connection\n");
 	ixgb_check_options(adapter);
@@ -592,6 +592,8 @@ ixgb_open(struct net_device *netdev)
 	if (err)
 		goto err_setup_tx;
 
+	netif_carrier_off(netdev);
+
 	/* allocate receive descriptors */
 
 	err = ixgb_setup_rx_resources(adapter);
@@ -602,6 +604,8 @@ ixgb_open(struct net_device *netdev)
 	if (err)
 		goto err_up;
 
+	netif_start_queue(netdev);
+
 	return 0;
 
 err_up:
@@ -1116,7 +1120,6 @@ ixgb_watchdog(unsigned long data)
 			adapter->link_speed = 10000;
 			adapter->link_duplex = FULL_DUPLEX;
 			netif_carrier_on(netdev);
-			netif_wake_queue(netdev);
 		}
 	} else {
 		if (netif_carrier_ok(netdev)) {
@@ -1125,8 +1128,6 @@ ixgb_watchdog(unsigned long data)
 			printk(KERN_INFO "ixgb: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_stop_queue(netdev);
-
 		}
 	}
 
@@ -1139,6 +1140,8 @@ ixgb_watchdog(unsigned long data)
 			 * to get done, so reset controller to flush Tx.
 			 * (Do the reset outside of interrupt context). */
 			schedule_work(&adapter->tx_timeout_task);
+			/* return immediately since reset is imminent */
+			return;
 		}
 	}
 
@@ -1297,7 +1300,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 		buffer_info->length = size;
 		WARN_ON(buffer_info->dma != 0);
 		buffer_info->time_stamp = jiffies;
-		buffer_info->dma = map[0] + offset;
+		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 			pci_map_single(adapter->pdev,
 				skb->data + offset,
 				size,
@@ -1337,7 +1340,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
 
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
-			buffer_info->dma = map[f + 1] + offset;
+			buffer_info->dma = map[f] + offset;
 			buffer_info->next_to_watch = 0;
 
 			len -= size;
@@ -1485,7 +1488,6 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	if (count) {
 		ixgb_tx_queue(adapter, count, vlan_id, tx_flags);
-		netdev->trans_start = jiffies;
 		/* Make sure there is space in the ring for the next send. */
 		ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED);
 
diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h
index d92e72bd627..371a6be4d96 100644
--- a/drivers/net/ixgb/ixgb_osdep.h
+++ b/drivers/net/ixgb/ixgb_osdep.h
@@ -40,7 +40,7 @@
 #include <linux/sched.h>
 
 #undef ASSERT
-#define ASSERT(x)	if (!(x)) BUG()
+#define ASSERT(x)	BUG_ON(!(x))
 #define MSGOUT(S, A, B)	printk(KERN_DEBUG S "\n", A, B)
 
 #ifdef DBG
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index b3f8208ec7b..21b41f42b61 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -37,3 +37,5 @@ ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
 
 ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
                               ixgbe_dcb_82599.o ixgbe_dcb_nl.o
+
+ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index c26433d1460..cd22323cfd2 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -36,6 +36,10 @@
 #include "ixgbe_type.h"
 #include "ixgbe_common.h"
 #include "ixgbe_dcb.h"
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#define IXGBE_FCOE
+#include "ixgbe_fcoe.h"
+#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */
 #ifdef CONFIG_IXGBE_DCA
 #include <linux/dca.h>
 #endif
@@ -71,6 +75,8 @@
 #define IXGBE_RXBUFFER_128   128    /* Used for packet split */
 #define IXGBE_RXBUFFER_256   256    /* Used for packet split */
 #define IXGBE_RXBUFFER_2048  2048
+#define IXGBE_RXBUFFER_4096  4096
+#define IXGBE_RXBUFFER_8192  8192
 #define IXGBE_MAX_RXBUFFER   16384  /* largest size for a single descriptor */
 
 #define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256
@@ -84,6 +90,8 @@
 #define IXGBE_TX_FLAGS_VLAN		(u32)(1 << 1)
 #define IXGBE_TX_FLAGS_TSO		(u32)(1 << 2)
 #define IXGBE_TX_FLAGS_IPV4		(u32)(1 << 3)
+#define IXGBE_TX_FLAGS_FCOE		(u32)(1 << 4)
+#define IXGBE_TX_FLAGS_FSO		(u32)(1 << 5)
 #define IXGBE_TX_FLAGS_VLAN_MASK	0xffff0000
 #define IXGBE_TX_FLAGS_VLAN_PRIO_MASK   0x0000e000
 #define IXGBE_TX_FLAGS_VLAN_SHIFT	16
@@ -113,17 +121,18 @@ struct ixgbe_queue_stats {
 
 struct ixgbe_ring {
 	void *desc;			/* descriptor ring memory */
-	dma_addr_t dma;			/* phys. address of descriptor ring */
-	unsigned int size;		/* length in bytes */
-	unsigned int count;		/* amount of descriptors */
-	unsigned int next_to_use;
-	unsigned int next_to_clean;
-
-	int queue_index; /* needed for multiqueue queue management */
 	union {
 		struct ixgbe_tx_buffer *tx_buffer_info;
 		struct ixgbe_rx_buffer *rx_buffer_info;
 	};
+	u8 atr_sample_rate;
+	u8 atr_count;
+	u16 count;			/* amount of descriptors */
+	u16 rx_buf_len;
+	u16 next_to_use;
+	u16 next_to_clean;
+
+	u8 queue_index; /* needed for multiqueue queue management */
 
 	u16 head;
 	u16 tail;
@@ -131,22 +140,24 @@ struct ixgbe_ring {
 	unsigned int total_bytes;
 	unsigned int total_packets;
 
-	u16 reg_idx; /* holds the special value that gets the hardware register
-		      * offset associated with this ring, which is different
-		      * for DCB and RSS modes */
-
 #ifdef CONFIG_IXGBE_DCA
 	/* cpu for tx queue */
 	int cpu;
 #endif
-	struct ixgbe_queue_stats stats;
-	u64 v_idx; /* maps directly to the index for this ring in the hardware
-	            * vector array, can also be used for finding the bit in EICR
-	            * and friends that represents the vector for this ring */
 
+	u16 work_limit;			/* max work per interrupt */
+	u16 reg_idx;			/* holds the special value that gets
+					 * the hardware register offset
+					 * associated with this ring, which is
+					 * different for DCB and RSS modes
+					 */
 
-	u16 work_limit;                /* max work per interrupt */
-	u16 rx_buf_len;
+	struct ixgbe_queue_stats stats;
+	unsigned long reinit_state;
+	u64 rsc_count;			/* stat for coalesced packets */
+
+	unsigned int size;		/* length in bytes */
+	dma_addr_t dma;			/* phys. address of descriptor ring */
 };
 
 enum ixgbe_ring_f_enum {
@@ -154,6 +165,10 @@ enum ixgbe_ring_f_enum {
 	RING_F_DCB,
 	RING_F_VMDQ,
 	RING_F_RSS,
+	RING_F_FDIR,
+#ifdef IXGBE_FCOE
+	RING_F_FCOE,
+#endif /* IXGBE_FCOE */
 
 	RING_F_ARRAY_SIZE      /* must be last in enum set */
 };
@@ -161,6 +176,10 @@ enum ixgbe_ring_f_enum {
 #define IXGBE_MAX_DCB_INDICES   8
 #define IXGBE_MAX_RSS_INDICES  16
 #define IXGBE_MAX_VMDQ_INDICES 16
+#define IXGBE_MAX_FDIR_INDICES 64
+#ifdef IXGBE_FCOE
+#define IXGBE_MAX_FCOE_INDICES  8
+#endif /* IXGBE_FCOE */
 struct ixgbe_ring_feature {
 	int indices;
 	int mask;
@@ -178,6 +197,9 @@ struct ixgbe_ring_feature {
  */
 struct ixgbe_q_vector {
 	struct ixgbe_adapter *adapter;
+	unsigned int v_idx; /* index of q_vector within array, also used for
+	                     * finding the bit in EICR and friends that
+	                     * represents the vector for this ring */
 	struct napi_struct napi;
 	DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */
 	DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
@@ -207,7 +229,15 @@ struct ixgbe_q_vector {
 #define IXGBE_TX_CTXTDESC_ADV(R, i)	    \
 	(&(((struct ixgbe_adv_tx_context_desc *)((R).desc))[i]))
 
+#define IXGBE_GET_DESC(R, i, type)	(&(((struct type *)((R).desc))[i]))
+#define IXGBE_TX_DESC(R, i)	IXGBE_GET_DESC(R, i, ixgbe_legacy_tx_desc)
+#define IXGBE_RX_DESC(R, i)	IXGBE_GET_DESC(R, i, ixgbe_legacy_rx_desc)
+
 #define IXGBE_MAX_JUMBO_FRAME_SIZE        16128
+#ifdef IXGBE_FCOE
+/* Use 3K as the baby jumbo frame size for FCoE */
+#define IXGBE_FCOE_JUMBO_FRAME_SIZE       3072
+#endif /* IXGBE_FCOE */
 
 #define OTHER_VECTOR 1
 #define NON_Q_VECTORS (OTHER_VECTOR)
@@ -229,11 +259,12 @@ struct ixgbe_adapter {
 	struct vlan_group *vlgrp;
 	u16 bd_number;
 	struct work_struct reset_task;
-	struct ixgbe_q_vector q_vector[MAX_MSIX_Q_VECTORS];
+	struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
 	char name[MAX_MSIX_COUNT][IFNAMSIZ + 9];
 	struct ixgbe_dcb_config dcb_cfg;
 	struct ixgbe_dcb_config temp_dcb_cfg;
 	u8 dcb_set_bitmap;
+	enum ixgbe_fc_mode last_lfc_mode;
 
 	/* Interrupt Throttle Rate */
 	u32 itr_setting;
@@ -294,7 +325,13 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG_IN_WATCHDOG_TASK             (u32)(1 << 23)
 #define IXGBE_FLAG_IN_SFP_LINK_TASK             (u32)(1 << 24)
 #define IXGBE_FLAG_IN_SFP_MOD_TASK              (u32)(1 << 25)
+#define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 26)
+#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 27)
+#define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 29)
 
+	u32 flags2;
+#define IXGBE_FLAG2_RSC_CAPABLE                 (u32)(1)
+#define IXGBE_FLAG2_RSC_ENABLED                 (u32)(1 << 1)
 /* default to trying for four seconds */
 #define IXGBE_TRY_LINK_TIMEOUT (4 * HZ)
 
@@ -303,6 +340,10 @@ struct ixgbe_adapter {
 	struct pci_dev *pdev;
 	struct net_device_stats net_stats;
 
+	u32 test_icr;
+	struct ixgbe_ring test_tx_ring;
+	struct ixgbe_ring test_rx_ring;
+
 	/* structs defined in ixgbe_hw.h */
 	struct ixgbe_hw hw;
 	u16 msg_enable;
@@ -325,6 +366,14 @@ struct ixgbe_adapter {
 	struct timer_list sfp_timer;
 	struct work_struct multispeed_fiber_task;
 	struct work_struct sfp_config_module_task;
+	u32 fdir_pballoc;
+	u32 atr_sample_rate;
+	spinlock_t fdir_perfect_lock;
+	struct work_struct fdir_reinit_task;
+#ifdef IXGBE_FCOE
+	struct ixgbe_fcoe fcoe;
+#endif /* IXGBE_FCOE */
+	u64 rsc_count;
 	u32 wol;
 	u16 eeprom_version;
 };
@@ -333,6 +382,7 @@ enum ixbge_state_t {
 	__IXGBE_TESTING,
 	__IXGBE_RESETTING,
 	__IXGBE_DOWN,
+	__IXGBE_FDIR_INIT_DONE,
 	__IXGBE_SFP_MODULE_NOT_FOUND
 };
 
@@ -363,10 +413,77 @@ extern int ixgbe_setup_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *)
 extern void ixgbe_free_rx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
 extern void ixgbe_free_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
 extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
-extern void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter);
 extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
-void ixgbe_napi_add_all(struct ixgbe_adapter *adapter);
-void ixgbe_napi_del_all(struct ixgbe_adapter *adapter);
-extern void ixgbe_write_eitr(struct ixgbe_adapter *, int, u32);
+extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
+extern void ixgbe_write_eitr(struct ixgbe_q_vector *);
+extern int ethtool_ioctl(struct ifreq *ifr);
+extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc);
+extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc);
+extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+                                                 struct ixgbe_atr_input *input,
+                                                 u8 queue);
+extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+                                               struct ixgbe_atr_input *input,
+                                               u16 soft_id,
+                                               u8 queue);
+extern u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *input, u32 key);
+extern s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input,
+                                       u16 vlan_id);
+extern s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input,
+                                        u32 src_addr);
+extern s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input,
+                                        u32 dst_addr);
+extern s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input,
+                                        u32 src_addr_1, u32 src_addr_2,
+                                        u32 src_addr_3, u32 src_addr_4);
+extern s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
+                                        u32 dst_addr_1, u32 dst_addr_2,
+                                        u32 dst_addr_3, u32 dst_addr_4);
+extern s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input,
+                                        u16 src_port);
+extern s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input,
+                                        u16 dst_port);
+extern s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input,
+                                         u16 flex_byte);
+extern s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input,
+                                       u8 vm_pool);
+extern s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input,
+                                      u8 l4type);
+extern s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input,
+                                       u16 *vlan_id);
+extern s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input,
+                                        u32 *src_addr);
+extern s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input,
+                                        u32 *dst_addr);
+extern s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
+                                        u32 *src_addr_1, u32 *src_addr_2,
+                                        u32 *src_addr_3, u32 *src_addr_4);
+extern s32 ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input,
+                                        u32 *dst_addr_1, u32 *dst_addr_2,
+                                        u32 *dst_addr_3, u32 *dst_addr_4);
+extern s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input,
+                                        u16 *src_port);
+extern s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input,
+                                        u16 *dst_port);
+extern s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input,
+                                         u16 *flex_byte);
+extern s32 ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input,
+                                       u8 *vm_pool);
+extern s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input,
+                                      u8 *l4type);
+#ifdef IXGBE_FCOE
+extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
+extern int ixgbe_fso(struct ixgbe_adapter *adapter,
+                     struct ixgbe_ring *tx_ring, struct sk_buff *skb,
+                     u32 tx_flags, u8 *hdr_len);
+extern void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter);
+extern int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
+                          union ixgbe_adv_rx_desc *rx_desc,
+                          struct sk_buff *skb);
+extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+                              struct scatterlist *sgl, unsigned int sgc);
+extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid);
+#endif /* IXGBE_FCOE */
 
 #endif /* _IXGBE_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 4791238c3f6..b9923047ce1 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -75,18 +75,49 @@ static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw)
 static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* Call PHY identify routine to get the phy type */
+	ixgbe_identify_phy_generic(hw);
+
+	mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_phy_ops_82598 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
 	struct ixgbe_phy_info *phy = &hw->phy;
 	s32 ret_val = 0;
 	u16 list_offset, data_offset;
 
-	/* Set the bus information prior to PHY identification */
-	mac->ops.get_bus_info(hw);
+	/* Identify the PHY */
+	phy->ops.identify(hw);
 
-	/* Call PHY identify routine to get the phy type */
-	ixgbe_identify_phy_generic(hw);
+	/* Overwrite the link function pointers if copper PHY */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+		mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
+		mac->ops.setup_link_speed =
+		                     &ixgbe_setup_copper_link_speed_82598;
+		mac->ops.get_link_capabilities =
+		                  &ixgbe_get_copper_link_capabilities_82598;
+	}
 
-	/* PHY Init */
-	switch (phy->type) {
+	switch (hw->phy.type) {
 	case ixgbe_phy_tn:
 		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
 		phy->ops.get_firmware_version =
@@ -106,8 +137,8 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 
 		/* Check to see if SFP+ module is supported */
 		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
-		                                              &list_offset,
-		                                              &data_offset);
+		                                            &list_offset,
+		                                            &data_offset);
 		if (ret_val != 0) {
 			ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
 			goto out;
@@ -117,21 +148,6 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 		break;
 	}
 
-	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
-		mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
-		mac->ops.setup_link_speed =
-		                     &ixgbe_setup_copper_link_speed_82598;
-		mac->ops.get_link_capabilities =
-		                     &ixgbe_get_copper_link_capabilities_82598;
-	}
-
-	mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
-	mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
-	mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
-	mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
-	mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
-	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw);
-
 out:
 	return ret_val;
 }
@@ -149,12 +165,19 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
                                              bool *autoneg)
 {
 	s32 status = 0;
+	u32 autoc = 0;
 
 	/*
 	 * Determine link capabilities based on the stored value of AUTOC,
-	 * which represents EEPROM defaults.
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
 	 */
-	switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
 	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 		*autoneg = false;
@@ -173,9 +196,9 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
 	case IXGBE_AUTOC_LMS_KX4_AN:
 	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 		*autoneg = true;
 		break;
@@ -206,14 +229,13 @@ static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
 	*speed = 0;
 	*autoneg = true;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
-	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
 	                              &speed_ability);
 
 	if (status == 0) {
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+		if (speed_ability & MDIO_SPEED_10G)
 		    *speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+		if (speed_ability & MDIO_PMA_SPEED_1000)
 		    *speed |= IXGBE_LINK_SPEED_1GB_FULL;
 	}
 
@@ -271,6 +293,17 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	u32 rmcs_reg;
 	u32 reg;
 
+#ifdef CONFIG_DCB
+	if (hw->fc.requested_mode == ixgbe_fc_pfc)
+		goto out;
+
+#endif /* CONFIG_DCB */
+	/* Negotiate the fc mode to use */
+	ret_val = ixgbe_fc_autoneg(hw);
+	if (ret_val)
+		goto out;
+
+	/* Disable any previous flow control settings */
 	fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
 	fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
 
@@ -282,14 +315,20 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	 * 0: Flow control is completely disabled
 	 * 1: Rx flow control is enabled (we can receive pause frames,
 	 *    but not send pause frames).
-	 * 2:  Tx flow control is enabled (we can send pause frames but
+	 * 2: Tx flow control is enabled (we can send pause frames but
 	 *     we do not support receiving pause frames).
 	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
 	 * other: Invalid.
+#ifdef CONFIG_DCB
+	 * 4: Priority Flow Control is enabled.
+#endif
 	 */
 	switch (hw->fc.current_mode) {
 	case ixgbe_fc_none:
-		/* Flow control completely disabled by software override. */
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
 		break;
 	case ixgbe_fc_rx_pause:
 		/*
@@ -314,6 +353,11 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 		fctrl_reg |= IXGBE_FCTRL_RFCE;
 		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
 		break;
+#ifdef CONFIG_DCB
+	case ixgbe_fc_pfc:
+		goto out;
+		break;
+#endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = -IXGBE_ERR_CONFIG;
@@ -321,7 +365,8 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 		break;
 	}
 
-	/* Enable 802.3x based flow control settings. */
+	/* Set 802.3x based flow control settings. */
+	fctrl_reg |= IXGBE_FCTRL_DPF;
 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
 	IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
 
@@ -340,7 +385,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num));
+	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
 	if ((packetbuf_num & 1) == 0)
 		reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
 	else
@@ -354,77 +399,6 @@ out:
 }
 
 /**
- *  ixgbe_setup_fc_82598 - Configure flow control settings
- *  @hw: pointer to hardware structure
- *  @packetbuf_num: packet buffer number (0-7)
- *
- *  Configures the flow control settings based on SW configuration.  This
- *  function is used for 802.3x flow control configuration only.
- **/
-static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
-{
-	s32 ret_val = 0;
-	ixgbe_link_speed speed;
-	bool link_up;
-
-	/* Validate the packetbuf configuration */
-	if (packetbuf_num < 0 || packetbuf_num > 7) {
-		hw_dbg(hw, "Invalid packet buffer number [%d], expected range is"
-		          " 0-7\n", packetbuf_num);
-		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
-		goto out;
-	}
-
-	/*
-	 * Validate the water mark configuration.  Zero water marks are invalid
-	 * because it causes the controller to just blast out fc packets.
-	 */
-	if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
-		hw_dbg(hw, "Invalid water mark configuration\n");
-		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
-		goto out;
-	}
-
-	/*
-	 * Validate the requested mode.  Strict IEEE mode does not allow
-	 * ixgbe_fc_rx_pause because it will cause testing anomalies.
-	 */
-	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
-		hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
-		ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
-		goto out;
-	}
-
-	/*
-	 * 10gig parts do not have a word in the EEPROM to determine the
-	 * default flow control setting, so we explicitly set it to full.
-	 */
-	if (hw->fc.requested_mode == ixgbe_fc_default)
-		hw->fc.requested_mode = ixgbe_fc_full;
-
-	/*
-	 * Save off the requested flow control mode for use later.  Depending
-	 * on the link partner's capabilities, we may or may not use this mode.
-	 */
-
-	hw->fc.current_mode = hw->fc.requested_mode;
-
-	/* Decide whether to use autoneg or not. */
-	hw->mac.ops.check_link(hw, &speed, &link_up, false);
-	if (!hw->fc.disable_fc_autoneg && hw->phy.multispeed_fiber &&
-	    (speed == IXGBE_LINK_SPEED_1GB_FULL))
-		ret_val = ixgbe_fc_autoneg(hw);
-
-	if (ret_val)
-		goto out;
-
-	ret_val = ixgbe_fc_enable_82598(hw, packetbuf_num);
-
-out:
-	return ret_val;
-}
-
-/**
  *  ixgbe_setup_mac_link_82598 - Configures MAC link settings
  *  @hw: pointer to hardware structure
  *
@@ -463,13 +437,6 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
 		}
 	}
 
-	/*
-	 * We want to save off the original Flow Control configuration just in
-	 * case we get disconnected and then reconnected into a different hub
-	 * or switch with different Flow Control capabilities.
-	 */
-	ixgbe_setup_fc_82598(hw, 0);
-
 	/* Add delay to filter out noises during initial link setup */
 	msleep(50);
 
@@ -500,9 +467,9 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
 	 * clear indicates active; set indicates inactive.
 	 */
 	if (hw->phy.type == ixgbe_phy_nl) {
-		hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
-		hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
-		hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV,
+		hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
+		hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
+		hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD,
 		                     &adapt_comp_reg);
 		if (link_up_wait_to_complete) {
 			for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
@@ -515,10 +482,10 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
 				}
 				msleep(100);
 				hw->phy.ops.read_reg(hw, 0xC79F,
-				                     IXGBE_TWINAX_DEV,
+				                     MDIO_MMD_PMAPMD,
 				                     &link_reg);
 				hw->phy.ops.read_reg(hw, 0xC00C,
-				                     IXGBE_TWINAX_DEV,
+				                     MDIO_MMD_PMAPMD,
 				                     &adapt_comp_reg);
 			}
 		} else {
@@ -556,6 +523,11 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
 	else
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 
+	/* if link is down, zero out the current_mode */
+	if (*link_up == false) {
+		hw->fc.current_mode = ixgbe_fc_none;
+		hw->fc.fc_was_autonegged = false;
+	}
 out:
 	return 0;
 }
@@ -673,6 +645,7 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 {
 	s32 status = 0;
+	s32 phy_status = 0;
 	u32 ctrl;
 	u32 gheccr;
 	u32 i;
@@ -716,14 +689,27 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 	}
 
 	/* Reset PHY */
-	if (hw->phy.reset_disable == false)
+	if (hw->phy.reset_disable == false) {
+		/* PHY ops must be identified and initialized prior to reset */
+
+		/* Init PHY and function pointers, perform SFP setup */
+		phy_status = hw->phy.ops.init(hw);
+		if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+			goto reset_hw_out;
+		else if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
+			goto no_phy_reset;
+
+
 		hw->phy.ops.reset(hw);
+	}
 
+no_phy_reset:
 	/*
 	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
 	 * access and verify no pending requests before reset
 	 */
-	if (ixgbe_disable_pcie_master(hw) != 0) {
+	status = ixgbe_disable_pcie_master(hw);
+	if (status != 0) {
 		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
 		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
 	}
@@ -767,9 +753,19 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
 	}
 
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table
+	 */
+	hw->mac.ops.init_rx_addrs(hw);
+
 	/* Store the permanent mac address */
 	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
 
+reset_hw_out:
+	if (phy_status)
+		status = phy_status;
+
 	return status;
 }
 
@@ -954,14 +950,14 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
 		sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
 		hw->phy.ops.write_reg(hw,
 		                      IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
-		                      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+		                      MDIO_MMD_PMAPMD,
 		                      sfp_addr);
 
 		/* Poll status */
 		for (i = 0; i < 100; i++) {
 			hw->phy.ops.read_reg(hw,
 			                     IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
-			                     IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+			                     MDIO_MMD_PMAPMD,
 			                     &sfp_stat);
 			sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
 			if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
@@ -977,7 +973,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
 
 		/* Read data */
 		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
-		                     IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data);
+		                     MDIO_MMD_PMAPMD, &sfp_data);
 
 		*eeprom_data = (u8)(sfp_data >> 8);
 	} else {
@@ -998,35 +994,56 @@ out:
 static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
 {
 	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
+
+	hw->phy.ops.identify(hw);
+
+	/* Copper PHY must be checked before AUTOC LMS to determine correct
+	 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
+	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_cu_unknown) {
+		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+				     &ext_ability);
+		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	}
 
-	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82598:
-		/* Default device ID is mezzanine card KX/KX4 */
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
-				  IXGBE_PHYSICAL_LAYER_1000BASE_KX);
-		break;
-	case IXGBE_DEV_ID_82598_BX:
-		physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
-	case IXGBE_DEV_ID_82598EB_CX4:
-	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
-		break;
-	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
-		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		else
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
 		break;
-	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
-	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
-	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		else /* XAUI */
+			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
-	case IXGBE_DEV_ID_82598EB_XF_LR:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+	case IXGBE_AUTOC_LMS_KX4_AN:
+	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
 		break;
-	case IXGBE_DEV_ID_82598AT:
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_T |
-		                  IXGBE_PHYSICAL_LAYER_1000BASE_T);
+	default:
 		break;
-	case IXGBE_DEV_ID_82598EB_SFP_LOM:
+	}
+
+	if (hw->phy.type == ixgbe_phy_nl) {
 		hw->phy.ops.identify_sfp(hw);
 
 		switch (hw->phy.sfp_type) {
@@ -1043,13 +1060,25 @@ static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
 			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 			break;
 		}
-		break;
+	}
 
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		break;
+	case IXGBE_DEV_ID_82598EB_XF_LR:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		break;
 	default:
-		physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
 	}
 
+out:
 	return physical_layer;
 }
 
@@ -1086,7 +1115,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.disable_mc		= &ixgbe_disable_mc_generic,
 	.clear_vfta		= &ixgbe_clear_vfta_82598,
 	.set_vfta		= &ixgbe_set_vfta_82598,
-	.setup_fc		= &ixgbe_setup_fc_82598,
+	.fc_enable		= &ixgbe_fc_enable_82598,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
@@ -1099,6 +1128,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
 static struct ixgbe_phy_operations phy_ops_82598 = {
 	.identify		= &ixgbe_identify_phy_generic,
 	.identify_sfp		= &ixgbe_identify_sfp_module_generic,
+	.init			= &ixgbe_init_phy_ops_82598,
 	.reset			= &ixgbe_reset_phy_generic,
 	.read_reg		= &ixgbe_read_phy_reg_generic,
 	.write_reg		= &ixgbe_write_phy_reg_generic,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 29771fbaa42..1984cab7d48 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -71,10 +71,10 @@ s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);
 s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw);
 s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
 s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
-s32 ixgbe_start_hw_rev_0_82599(struct ixgbe_hw *hw);
 s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
 s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw);
 u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
 
 void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 {
@@ -100,22 +100,36 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 
 	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
 		ixgbe_init_mac_link_ops_82599(hw);
+
+		hw->phy.ops.reset = NULL;
+
 		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
 		                                              &data_offset);
 
 		if (ret_val != 0)
 			goto setup_sfp_out;
 
+		/* PHY config will finish before releasing the semaphore */
+		ret_val = ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val != 0) {
+			ret_val = IXGBE_ERR_SWFW_SYNC;
+			goto setup_sfp_out;
+		}
+
 		hw->eeprom.ops.read(hw, ++data_offset, &data_value);
 		while (data_value != 0xffff) {
 			IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
 			IXGBE_WRITE_FLUSH(hw);
 			hw->eeprom.ops.read(hw, ++data_offset, &data_value);
 		}
-		/* Now restart DSP */
-		IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102);
-		IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d);
-		IXGBE_WRITE_FLUSH(hw);
+		/* Now restart DSP by setting Restart_AN */
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
+		    (IXGBE_READ_REG(hw, IXGBE_AUTOC) | IXGBE_AUTOC_AN_RESTART));
+
+		/* Release the semaphore */
+		ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+		/* Delay obtaining semaphore again to allow FW access */
+		msleep(hw->eeprom.semaphore_delay);
 	}
 
 setup_sfp_out:
@@ -146,51 +160,60 @@ u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
-	struct ixgbe_phy_info *phy = &hw->phy;
-	s32 ret_val;
 
-	/* Set the bus information prior to PHY identification */
-	mac->ops.get_bus_info(hw);
+	ixgbe_init_mac_link_ops_82599(hw);
 
-	/* Call PHY identify routine to get the Cu or SFI phy type */
-	ret_val = phy->ops.identify(hw);
+	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
 
-	if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
-		goto get_invariants_out;
+	return 0;
+}
 
-	ixgbe_init_mac_link_ops_82599(hw);
+/**
+ *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
 
-	/* Setup SFP module if there is one present. */
-	ret_val = mac->ops.setup_sfp(hw);
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_82599(hw);
 
 	/* If copper media, overwrite with copper function pointers */
 	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
 		mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
 		mac->ops.setup_link_speed =
-		                  &ixgbe_setup_copper_link_speed_82599;
+		                     &ixgbe_setup_copper_link_speed_82599;
 		mac->ops.get_link_capabilities =
 		                  &ixgbe_get_copper_link_capabilities_82599;
 	}
 
-	/* PHY Init */
+	/* Set necessary function pointers based on phy type */
 	switch (hw->phy.type) {
 	case ixgbe_phy_tn:
 		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
 		phy->ops.get_firmware_version =
-		                  &ixgbe_get_phy_firmware_version_tnx;
+		             &ixgbe_get_phy_firmware_version_tnx;
 		break;
 	default:
 		break;
 	}
 
-	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
-	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
-	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
-	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
-	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
-	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
-
-get_invariants_out:
 	return ret_val;
 }
 
@@ -207,8 +230,19 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
                                       bool *negotiation)
 {
 	s32 status = 0;
+	u32 autoc = 0;
+
+	/*
+	 * Determine link capabilities based on the stored value of AUTOC,
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
+	 */
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 
-	switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
 	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = false;
@@ -232,22 +266,22 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	case IXGBE_AUTOC_LMS_KX4_KX_KR:
 	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = true;
 		break;
 
 	case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
 		*speed = IXGBE_LINK_SPEED_100_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = true;
 		break;
@@ -291,14 +325,13 @@ static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
 	*speed = 0;
 	*autoneg = true;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
-	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
 	                              &speed_ability);
 
 	if (status == 0) {
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+		if (speed_ability & MDIO_SPEED_10G)
 		    *speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+		if (speed_ability & MDIO_PMA_SPEED_1000)
 		    *speed |= IXGBE_LINK_SPEED_1GB_FULL;
 	}
 
@@ -323,8 +356,8 @@ enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 	}
 
 	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82599:
 	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_XAUI_LOM:
 		/* Default device ID is mezzanine card KX/KX4 */
 		media_type = ixgbe_media_type_backplane;
 		break;
@@ -380,9 +413,6 @@ s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw)
 		}
 	}
 
-	/* Set up flow control */
-	status = ixgbe_setup_fc_generic(hw, 0);
-
 	/* Add delay to filter out noises during initial link setup */
 	msleep(50);
 
@@ -428,11 +458,31 @@ s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
 	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
 	bool link_up = false;
 	bool negotiation;
+	int i;
 
 	/* Mask off requested but non-supported speeds */
 	hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation);
 	speed &= phy_link_speed;
 
+	 /* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	/*
+	 * When the driver changes the link speeds that it can support,
+	 * it sets autotry_restart to true to indicate that we need to
+	 * initiate a new autotry session with the link partner.  To do
+	 * so, we set the speed then disable and re-enable the tx laser, to
+	 * alert the link partner that it also needs to restart autotry on its
+	 * end.  This is consistent with true clause 37 autoneg, which also
+	 * involves a loss of signal.
+	 */
+
 	/*
 	 * Try each speed one by one, highest priority first.  We do this in
 	 * software because 10gb fiber doesn't support speed autonegotiation.
@@ -441,21 +491,52 @@ s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
 		speedcnt++;
 		highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
 
-		/* Set hardware SDP's */
+		/* If we already have link at this speed, just jump out */
+		hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+
+		if ((phy_link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
 		esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
 		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 
-		ixgbe_setup_mac_link_speed_82599(hw,
-		                                 IXGBE_LINK_SPEED_10GB_FULL,
-		                                 autoneg,
-		                                 autoneg_wait_to_complete);
+		/* Allow module to change analog characteristics (1G->10G) */
+		msleep(40);
 
-		msleep(50);
-
-		/* If we have link, just jump out */
-		hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
-		if (link_up)
+		status = ixgbe_setup_mac_link_speed_82599(hw,
+		                                     IXGBE_LINK_SPEED_10GB_FULL,
+		                                     autoneg,
+		                                     autoneg_wait_to_complete);
+		if (status != 0)
 			goto out;
+
+		/* Flap the tx laser if it has not already been done */
+		if (hw->mac.autotry_restart) {
+			/* Disable tx laser; allow 100us to go dark per spec */
+			esdp_reg |= IXGBE_ESDP_SDP3;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			udelay(100);
+
+			/* Enable tx laser; allow 2ms to light up per spec */
+			esdp_reg &= ~IXGBE_ESDP_SDP3;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			msleep(2);
+
+			hw->mac.autotry_restart = false;
+		}
+
+		/* The controller may take up to 500ms at 10g to acquire link */
+		for (i = 0; i < 5; i++) {
+			/* Wait for the link partner to also set speed */
+			msleep(100);
+
+			/* If we have link, just jump out */
+			hw->mac.ops.check_link(hw, &phy_link_speed,
+			                       &link_up, false);
+			if (link_up)
+				goto out;
+		}
 	}
 
 	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
@@ -463,16 +544,44 @@ s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
 		if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
 			highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
 
-		/* Set hardware SDP's */
+		/* If we already have link at this speed, just jump out */
+		hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+
+		if ((phy_link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
 		esdp_reg &= ~IXGBE_ESDP_SDP5;
 		esdp_reg |= IXGBE_ESDP_SDP5_DIR;
 		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 
-		ixgbe_setup_mac_link_speed_82599(
-			hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg,
-			autoneg_wait_to_complete);
+		/* Allow module to change analog characteristics (10G->1G) */
+		msleep(40);
 
-		msleep(50);
+		status = ixgbe_setup_mac_link_speed_82599(hw,
+		                                      IXGBE_LINK_SPEED_1GB_FULL,
+		                                      autoneg,
+		                                      autoneg_wait_to_complete);
+		if (status != 0)
+			goto out;
+
+		/* Flap the tx laser if it has not already been done */
+		if (hw->mac.autotry_restart) {
+			/* Disable tx laser; allow 100us to go dark per spec */
+			esdp_reg |= IXGBE_ESDP_SDP3;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			udelay(100);
+
+			/* Enable tx laser; allow 2ms to light up per spec */
+			esdp_reg &= ~IXGBE_ESDP_SDP3;
+			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+			msleep(2);
+
+			hw->mac.autotry_restart = false;
+		}
+
+		/* Wait for the link partner to also set speed */
+		msleep(100);
 
 		/* If we have link, just jump out */
 		hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
@@ -538,6 +647,11 @@ s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 	else
 		*speed = IXGBE_LINK_SPEED_100_FULL;
 
+	/* if link is down, zero out the current_mode */
+	if (*link_up == false) {
+		hw->fc.current_mode = ixgbe_fc_none;
+		hw->fc.fc_was_autonegged = false;
+	}
 
 	return 0;
 }
@@ -558,6 +672,8 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 	s32 status = 0;
 	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 start_autoc = autoc;
+	u32 orig_autoc = 0;
 	u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
 	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
 	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
@@ -571,15 +687,25 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 
 	if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
 		status = IXGBE_ERR_LINK_SETUP;
-	} else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
-	           link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
-	           link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+		goto out;
+	}
+
+	/* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+	if (hw->mac.orig_link_settings_stored)
+		orig_autoc = hw->mac.orig_autoc;
+	else
+		orig_autoc = autoc;
+
+
+	if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
 		/* Set KX4/KX/KR support according to speed requested */
 		autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
 		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
-			if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
 				autoc |= IXGBE_AUTOC_KX4_SUPP;
-			if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+			if (orig_autoc & IXGBE_AUTOC_KR_SUPP)
 				autoc |= IXGBE_AUTOC_KR_SUPP;
 		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 			autoc |= IXGBE_AUTOC_KX_SUPP;
@@ -605,7 +731,7 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 		}
 	}
 
-	if (status == 0) {
+	if (autoc != start_autoc) {
 		/* Restart link */
 		autoc |= IXGBE_AUTOC_AN_RESTART;
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
@@ -632,13 +758,11 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 			}
 		}
 
-		/* Set up flow control */
-		status = ixgbe_setup_fc_generic(hw, 0);
-
 		/* Add delay to filter out noises during initial link setup */
 		msleep(50);
 	}
 
+out:
 	return status;
 }
 
@@ -705,14 +829,30 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 	/* Call adapter stop to disable tx/rx and clear interrupts */
 	hw->mac.ops.stop_adapter(hw);
 
+	/* PHY ops must be identified and initialized prior to reset */
+
+	/* Init PHY and function pointers, perform SFP setup */
+	status = hw->phy.ops.init(hw);
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto reset_hw_out;
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
 	/* Reset PHY */
-	hw->phy.ops.reset(hw);
+	if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+		hw->phy.ops.reset(hw);
 
 	/*
 	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
 	 * access and verify no pending requests before reset
 	 */
-	if (ixgbe_disable_pcie_master(hw) != 0) {
+	status = ixgbe_disable_pcie_master(hw);
+	if (status != 0) {
 		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
 		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
 	}
@@ -770,9 +910,30 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 		}
 	}
 
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
 	/* Store the permanent mac address */
 	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
 
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+		                    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+reset_hw_out:
 	return status;
 }
 
@@ -1004,6 +1165,931 @@ s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
+{
+	int i;
+	u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+	fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
+
+	/*
+	 * Before starting reinitialization process,
+	 * FDIRCMD.CMD must be zero.
+	 */
+	for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+		if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+		      IXGBE_FDIRCMD_CMD_MASK))
+			break;
+		udelay(10);
+	}
+	if (i >= IXGBE_FDIRCMD_CMD_POLL) {
+		hw_dbg(hw ,"Flow Director previous command isn't complete, "
+		       "aborting table re-initialization. \n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * 82599 adapters flow director init flow cannot be restarted,
+	 * Workaround 82599 silicon errata by performing the following steps
+	 * before re-writing the FDIRCTRL control register with the same value.
+	 * - write 1 to bit 8 of FDIRCMD register &
+	 * - write 0 to bit 8 of FDIRCMD register
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+	                (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+	                 IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+	                (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+	                 ~IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * Clear FDIR Hash register to clear any leftover hashes
+	 * waiting to be programmed.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
+	IXGBE_WRITE_FLUSH(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll init-done after we write FDIRCTRL register */
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+		                   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		udelay(10);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	/* Clear FDIR statistics registers (read to clear) */
+	IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+	IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
+ *  @hw: pointer to hardware structure
+ *  @pballoc: which mode to allocate filters with
+ **/
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
+{
+	u32 fdirctrl = 0;
+	u32 pbsize;
+	int i;
+
+	/*
+	 * Before enabling Flow Director, the Rx Packet Buffer size
+	 * must be reduced.  The new value is the current size minus
+	 * flow director memory usage size.
+	 */
+	pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc));
+	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0),
+	    (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize));
+
+	/*
+	 * The defaults in the HW for RX PB 1-7 are not zero and so should be
+	 * intialized to zero for non DCB mode otherwise actual total RX PB
+	 * would be bigger than programmed and filter space would run into
+	 * the PB 0 region.
+	 */
+	for (i = 1; i < 8; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+
+	/* Send interrupt when 64 filters are left */
+	fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT;
+
+	/* Set the maximum length per hash bucket to 0xA filters */
+	fdirctrl |= 0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT;
+
+	switch (pballoc) {
+	case IXGBE_FDIR_PBALLOC_64K:
+		/* 8k - 1 signature filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K;
+		break;
+	case IXGBE_FDIR_PBALLOC_128K:
+		/* 16k - 1 signature filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K;
+		break;
+	case IXGBE_FDIR_PBALLOC_256K:
+		/* 32k - 1 signature filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K;
+		break;
+	default:
+		/* bad value */
+		return IXGBE_ERR_CONFIG;
+	};
+
+	/* Move the flexible bytes to use the ethertype - shift 6 words */
+	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
+
+	fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS;
+
+	/* Prime the keys for hashing */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
+	                htonl(IXGBE_ATR_BUCKET_HASH_KEY));
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
+	                htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
+
+	/*
+	 * Poll init-done after we write the register.  Estimated times:
+	 *      10G: PBALLOC = 11b, timing is 60us
+	 *       1G: PBALLOC = 11b, timing is 600us
+	 *     100M: PBALLOC = 11b, timing is 6ms
+	 *
+	 *     Multiple these timings by 4 if under full Rx load
+	 *
+	 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+	 * 1 msec per poll time.  If we're at line rate and drop to 100M, then
+	 * this might not finish in our poll time, but we can live with that
+	 * for now.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+		                   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		msleep(1);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ *  @hw: pointer to hardware structure
+ *  @pballoc: which mode to allocate filters with
+ **/
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
+{
+	u32 fdirctrl = 0;
+	u32 pbsize;
+	int i;
+
+	/*
+	 * Before enabling Flow Director, the Rx Packet Buffer size
+	 * must be reduced.  The new value is the current size minus
+	 * flow director memory usage size.
+	 */
+	pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc));
+	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0),
+	    (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize));
+
+	/*
+	 * The defaults in the HW for RX PB 1-7 are not zero and so should be
+	 * intialized to zero for non DCB mode otherwise actual total RX PB
+	 * would be bigger than programmed and filter space would run into
+	 * the PB 0 region.
+	 */
+	for (i = 1; i < 8; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+
+	/* Send interrupt when 64 filters are left */
+	fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT;
+
+	switch (pballoc) {
+	case IXGBE_FDIR_PBALLOC_64K:
+		/* 2k - 1 perfect filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K;
+		break;
+	case IXGBE_FDIR_PBALLOC_128K:
+		/* 4k - 1 perfect filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K;
+		break;
+	case IXGBE_FDIR_PBALLOC_256K:
+		/* 8k - 1 perfect filters */
+		fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K;
+		break;
+	default:
+		/* bad value */
+		return IXGBE_ERR_CONFIG;
+	};
+
+	/* Turn perfect match filtering on */
+	fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH;
+	fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS;
+
+	/* Move the flexible bytes to use the ethertype - shift 6 words */
+	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
+
+	/* Prime the keys for hashing */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
+	                htonl(IXGBE_ATR_BUCKET_HASH_KEY));
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
+	                htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
+
+	/*
+	 * Poll init-done after we write the register.  Estimated times:
+	 *      10G: PBALLOC = 11b, timing is 60us
+	 *       1G: PBALLOC = 11b, timing is 600us
+	 *     100M: PBALLOC = 11b, timing is 6ms
+	 *
+	 *     Multiple these timings by 4 if under full Rx load
+	 *
+	 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+	 * 1 msec per poll time.  If we're at line rate and drop to 100M, then
+	 * this might not finish in our poll time, but we can live with that
+	 * for now.
+	 */
+
+	/* Set the maximum length per hash bucket to 0xA filters */
+	fdirctrl |= (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+		                   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		msleep(1);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+		hw_dbg(hw, "Flow Director Perfect poll time exceeded!\n");
+
+	return 0;
+}
+
+
+/**
+ *  ixgbe_atr_compute_hash_82599 - Compute the hashes for SW ATR
+ *  @stream: input bitstream to compute the hash on
+ *  @key: 32-bit hash key
+ **/
+u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input, u32 key)
+{
+	/*
+	 * The algorithm is as follows:
+	 *    Hash[15:0] = Sum { S[n] x K[n+16] }, n = 0...350
+	 *    where Sum {A[n]}, n = 0...n is bitwise XOR of A[0], A[1]...A[n]
+	 *    and A[n] x B[n] is bitwise AND between same length strings
+	 *
+	 *    K[n] is 16 bits, defined as:
+	 *       for n modulo 32 >= 15, K[n] = K[n % 32 : (n % 32) - 15]
+	 *       for n modulo 32 < 15, K[n] =
+	 *             K[(n % 32:0) | (31:31 - (14 - (n % 32)))]
+	 *
+	 *    S[n] is 16 bits, defined as:
+	 *       for n >= 15, S[n] = S[n:n - 15]
+	 *       for n < 15, S[n] = S[(n:0) | (350:350 - (14 - n))]
+	 *
+	 *    To simplify for programming, the algorithm is implemented
+	 *    in software this way:
+	 *
+	 *    Key[31:0], Stream[335:0]
+	 *
+	 *    tmp_key[11 * 32 - 1:0] = 11{Key[31:0] = key concatenated 11 times
+	 *    int_key[350:0] = tmp_key[351:1]
+	 *    int_stream[365:0] = Stream[14:0] | Stream[335:0] | Stream[335:321]
+	 *
+	 *    hash[15:0] = 0;
+	 *    for (i = 0; i < 351; i++) {
+	 *        if (int_key[i])
+	 *            hash ^= int_stream[(i + 15):i];
+	 *    }
+	 */
+
+	union {
+		u64    fill[6];
+		u32    key[11];
+		u8     key_stream[44];
+	} tmp_key;
+
+	u8   *stream = (u8 *)atr_input;
+	u8   int_key[44];      /* upper-most bit unused */
+	u8   hash_str[46];     /* upper-most 2 bits unused */
+	u16  hash_result = 0;
+	int  i, j, k, h;
+
+	/*
+	 * Initialize the fill member to prevent warnings
+	 * on some compilers
+	 */
+	 tmp_key.fill[0] = 0;
+
+	/* First load the temporary key stream */
+	for (i = 0; i < 6; i++) {
+		u64 fillkey = ((u64)key << 32) | key;
+		tmp_key.fill[i] = fillkey;
+	}
+
+	/*
+	 * Set the interim key for the hashing.  Bit 352 is unused, so we must
+	 * shift and compensate when building the key.
+	 */
+
+	int_key[0] = tmp_key.key_stream[0] >> 1;
+	for (i = 1, j = 0; i < 44; i++) {
+		unsigned int this_key = tmp_key.key_stream[j] << 7;
+		j++;
+		int_key[i] = (u8)(this_key | (tmp_key.key_stream[j] >> 1));
+	}
+
+	/*
+	 * Set the interim bit string for the hashing.  Bits 368 and 367 are
+	 * unused, so shift and compensate when building the string.
+	 */
+	hash_str[0] = (stream[40] & 0x7f) >> 1;
+	for (i = 1, j = 40; i < 46; i++) {
+		unsigned int this_str = stream[j] << 7;
+		j++;
+		if (j > 41)
+			j = 0;
+		hash_str[i] = (u8)(this_str | (stream[j] >> 1));
+	}
+
+	/*
+	 * Now compute the hash.  i is the index into hash_str, j is into our
+	 * key stream, k is counting the number of bits, and h interates within
+	 * each byte.
+	 */
+	for (i = 45, j = 43, k = 0; k < 351 && i >= 2 && j >= 0; i--, j--) {
+		for (h = 0; h < 8 && k < 351; h++, k++) {
+			if (int_key[j] & (1 << h)) {
+				/*
+				 * Key bit is set, XOR in the current 16-bit
+				 * string.  Example of processing:
+				 *    h = 0,
+				 *      tmp = (hash_str[i - 2] & 0 << 16) |
+				 *            (hash_str[i - 1] & 0xff << 8) |
+				 *            (hash_str[i] & 0xff >> 0)
+				 *      So tmp = hash_str[15 + k:k], since the
+				 *      i + 2 clause rolls off the 16-bit value
+				 *    h = 7,
+				 *      tmp = (hash_str[i - 2] & 0x7f << 9) |
+				 *            (hash_str[i - 1] & 0xff << 1) |
+				 *            (hash_str[i] & 0x80 >> 7)
+				 */
+				int tmp = (hash_str[i] >> h);
+				tmp |= (hash_str[i - 1] << (8 - h));
+				tmp |= (int)(hash_str[i - 2] & ((1 << h) - 1))
+				             << (16 - h);
+				hash_result ^= (u16)tmp;
+			}
+		}
+	}
+
+	return hash_result;
+}
+
+/**
+ *  ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
+ *  @input: input stream to modify
+ *  @vlan: the VLAN id to load
+ **/
+s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
+{
+	input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] = vlan >> 8;
+	input->byte_stream[IXGBE_ATR_VLAN_OFFSET] = vlan & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
+ *  @input: input stream to modify
+ *  @src_addr: the IP address to load
+ **/
+s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
+{
+	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] = src_addr >> 24;
+	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] =
+	                                               (src_addr >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] =
+	                                                (src_addr >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET] = src_addr & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
+ *  @input: input stream to modify
+ *  @dst_addr: the IP address to load
+ **/
+s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
+{
+	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] = dst_addr >> 24;
+	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] =
+	                                               (dst_addr >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] =
+	                                                (dst_addr >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET] = dst_addr & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_src_ipv6_82599 - Sets the source IPv6 address
+ *  @input: input stream to modify
+ *  @src_addr_1: the first 4 bytes of the IP address to load
+ *  @src_addr_2: the second 4 bytes of the IP address to load
+ *  @src_addr_3: the third 4 bytes of the IP address to load
+ *  @src_addr_4: the fourth 4 bytes of the IP address to load
+ **/
+s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input,
+                                 u32 src_addr_1, u32 src_addr_2,
+                                 u32 src_addr_3, u32 src_addr_4)
+{
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET] = src_addr_4 & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] =
+	                                               (src_addr_4 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] =
+	                                              (src_addr_4 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] = src_addr_4 >> 24;
+
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4] = src_addr_3 & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] =
+	                                               (src_addr_3 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] =
+	                                              (src_addr_3 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] = src_addr_3 >> 24;
+
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8] = src_addr_2 & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] =
+	                                               (src_addr_2 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] =
+	                                              (src_addr_2 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] = src_addr_2 >> 24;
+
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12] = src_addr_1 & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] =
+	                                               (src_addr_1 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] =
+	                                              (src_addr_1 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] = src_addr_1 >> 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_dst_ipv6_82599 - Sets the destination IPv6 address
+ *  @input: input stream to modify
+ *  @dst_addr_1: the first 4 bytes of the IP address to load
+ *  @dst_addr_2: the second 4 bytes of the IP address to load
+ *  @dst_addr_3: the third 4 bytes of the IP address to load
+ *  @dst_addr_4: the fourth 4 bytes of the IP address to load
+ **/
+s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
+                                 u32 dst_addr_1, u32 dst_addr_2,
+                                 u32 dst_addr_3, u32 dst_addr_4)
+{
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET] = dst_addr_4 & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] =
+	                                               (dst_addr_4 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 2] =
+	                                              (dst_addr_4 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 3] = dst_addr_4 >> 24;
+
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 4] = dst_addr_3 & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 5] =
+	                                               (dst_addr_3 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 6] =
+	                                              (dst_addr_3 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 7] = dst_addr_3 >> 24;
+
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 8] = dst_addr_2 & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 9] =
+	                                               (dst_addr_2 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 10] =
+	                                              (dst_addr_2 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 11] = dst_addr_2 >> 24;
+
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12] = dst_addr_1 & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] =
+	                                               (dst_addr_1 >> 8) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 14] =
+	                                              (dst_addr_1 >> 16) & 0xff;
+	input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 15] = dst_addr_1 >> 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_src_port_82599 - Sets the source port
+ *  @input: input stream to modify
+ *  @src_port: the source port to load
+ **/
+s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
+{
+	input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1] = src_port >> 8;
+	input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] = src_port & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_dst_port_82599 - Sets the destination port
+ *  @input: input stream to modify
+ *  @dst_port: the destination port to load
+ **/
+s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port)
+{
+	input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1] = dst_port >> 8;
+	input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] = dst_port & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes
+ *  @input: input stream to modify
+ *  @flex_bytes: the flexible bytes to load
+ **/
+s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, u16 flex_byte)
+{
+	input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] = flex_byte >> 8;
+	input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET] = flex_byte & 0xff;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_vm_pool_82599 - Sets the Virtual Machine pool
+ *  @input: input stream to modify
+ *  @vm_pool: the Virtual Machine pool to load
+ **/
+s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input, u8 vm_pool)
+{
+	input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET] = vm_pool;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type
+ *  @input: input stream to modify
+ *  @l4type: the layer 4 type value to load
+ **/
+s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, u8 l4type)
+{
+	input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET] = l4type;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream
+ *  @input: input stream to search
+ *  @vlan: the VLAN id to load
+ **/
+s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan)
+{
+	*vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET];
+	*vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address
+ *  @input: input stream to search
+ *  @src_addr: the IP address to load
+ **/
+s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input, u32 *src_addr)
+{
+	*src_addr = input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET];
+	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] << 8;
+	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] << 16;
+	*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] << 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address
+ *  @input: input stream to search
+ *  @dst_addr: the IP address to load
+ **/
+s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 *dst_addr)
+{
+	*dst_addr = input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET];
+	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] << 8;
+	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] << 16;
+	*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] << 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address
+ *  @input: input stream to search
+ *  @src_addr_1: the first 4 bytes of the IP address to load
+ *  @src_addr_2: the second 4 bytes of the IP address to load
+ *  @src_addr_3: the third 4 bytes of the IP address to load
+ *  @src_addr_4: the fourth 4 bytes of the IP address to load
+ **/
+s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
+                                 u32 *src_addr_1, u32 *src_addr_2,
+                                 u32 *src_addr_3, u32 *src_addr_4)
+{
+	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12];
+	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] << 8;
+	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] << 16;
+	*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] << 24;
+
+	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8];
+	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] << 8;
+	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] << 16;
+	*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] << 24;
+
+	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4];
+	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] << 8;
+	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] << 16;
+	*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] << 24;
+
+	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET];
+	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] << 8;
+	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] << 16;
+	*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] << 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_dst_ipv6_82599 - Gets the destination IPv6 address
+ *  @input: input stream to search
+ *  @dst_addr_1: the first 4 bytes of the IP address to load
+ *  @dst_addr_2: the second 4 bytes of the IP address to load
+ *  @dst_addr_3: the third 4 bytes of the IP address to load
+ *  @dst_addr_4: the fourth 4 bytes of the IP address to load
+ **/
+s32 ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input,
+                                 u32 *dst_addr_1, u32 *dst_addr_2,
+                                 u32 *dst_addr_3, u32 *dst_addr_4)
+{
+	*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12];
+	*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] << 8;
+	*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 14] << 16;
+	*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 15] << 24;
+
+	*dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 8];
+	*dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 9] << 8;
+	*dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 10] << 16;
+	*dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 11] << 24;
+
+	*dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 4];
+	*dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 5] << 8;
+	*dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 6] << 16;
+	*dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 7] << 24;
+
+	*dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET];
+	*dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] << 8;
+	*dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 2] << 16;
+	*dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 3] << 24;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_src_port_82599 - Gets the source port
+ *  @input: input stream to modify
+ *  @src_port: the source port to load
+ *
+ *  Even though the input is given in big-endian, the FDIRPORT registers
+ *  expect the ports to be programmed in little-endian.  Hence the need to swap
+ *  endianness when retrieving the data.  This can be confusing since the
+ *  internal hash engine expects it to be big-endian.
+ **/
+s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input, u16 *src_port)
+{
+	*src_port = input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] << 8;
+	*src_port |= input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1];
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_dst_port_82599 - Gets the destination port
+ *  @input: input stream to modify
+ *  @dst_port: the destination port to load
+ *
+ *  Even though the input is given in big-endian, the FDIRPORT registers
+ *  expect the ports to be programmed in little-endian.  Hence the need to swap
+ *  endianness when retrieving the data.  This can be confusing since the
+ *  internal hash engine expects it to be big-endian.
+ **/
+s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input, u16 *dst_port)
+{
+	*dst_port = input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] << 8;
+	*dst_port |= input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1];
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes
+ *  @input: input stream to modify
+ *  @flex_bytes: the flexible bytes to load
+ **/
+s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input, u16 *flex_byte)
+{
+	*flex_byte = input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET];
+	*flex_byte |= input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] << 8;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_vm_pool_82599 - Gets the Virtual Machine pool
+ *  @input: input stream to modify
+ *  @vm_pool: the Virtual Machine pool to load
+ **/
+s32 ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input, u8 *vm_pool)
+{
+	*vm_pool = input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET];
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type
+ *  @input: input stream to modify
+ *  @l4type: the layer 4 type value to load
+ **/
+s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input, u8 *l4type)
+{
+	*l4type = input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET];
+
+	return 0;
+}
+
+/**
+ *  ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
+ *  @hw: pointer to hardware structure
+ *  @stream: input bitstream
+ *  @queue: queue index to direct traffic to
+ **/
+s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+                                          struct ixgbe_atr_input *input,
+                                          u8 queue)
+{
+	u64  fdirhashcmd;
+	u64  fdircmd;
+	u32  fdirhash;
+	u16  bucket_hash, sig_hash;
+	u8   l4type;
+
+	bucket_hash = ixgbe_atr_compute_hash_82599(input,
+	                                           IXGBE_ATR_BUCKET_HASH_KEY);
+
+	/* bucket_hash is only 15 bits */
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+	sig_hash = ixgbe_atr_compute_hash_82599(input,
+	                                        IXGBE_ATR_SIGNATURE_HASH_KEY);
+
+	/* Get the l4type in order to program FDIRCMD properly */
+	/* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 */
+	ixgbe_atr_get_l4type_82599(input, &l4type);
+
+	/*
+	 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
+	 */
+	fdirhash = sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
+
+	fdircmd = (IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+	           IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN);
+
+	switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
+	case IXGBE_ATR_L4TYPE_TCP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
+		break;
+	case IXGBE_ATR_L4TYPE_UDP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
+		break;
+	case IXGBE_ATR_L4TYPE_SCTP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+		break;
+	default:
+		hw_dbg(hw, "Error on l4type input\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK)
+		fdircmd |= IXGBE_FDIRCMD_IPV6;
+
+	fdircmd |= ((u64)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT);
+	fdirhashcmd = ((fdircmd << 32) | fdirhash);
+
+	IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
+ *  @hw: pointer to hardware structure
+ *  @input: input bitstream
+ *  @queue: queue index to direct traffic to
+ *
+ *  Note that the caller to this function must lock before calling, since the
+ *  hardware writes must be protected from one another.
+ **/
+s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
+                                        struct ixgbe_atr_input *input,
+                                        u16 soft_id,
+                                        u8 queue)
+{
+	u32 fdircmd = 0;
+	u32 fdirhash;
+	u32 src_ipv4, dst_ipv4;
+	u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4;
+	u16 src_port, dst_port, vlan_id, flex_bytes;
+	u16 bucket_hash;
+	u8  l4type;
+
+	/* Get our input values */
+	ixgbe_atr_get_l4type_82599(input, &l4type);
+
+	/*
+	 * Check l4type formatting, and bail out before we touch the hardware
+	 * if there's a configuration issue
+	 */
+	switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
+	case IXGBE_ATR_L4TYPE_TCP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
+		break;
+	case IXGBE_ATR_L4TYPE_UDP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
+		break;
+	case IXGBE_ATR_L4TYPE_SCTP:
+		fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+		break;
+	default:
+		hw_dbg(hw, "Error on l4type input\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	bucket_hash = ixgbe_atr_compute_hash_82599(input,
+	                                           IXGBE_ATR_BUCKET_HASH_KEY);
+
+	/* bucket_hash is only 15 bits */
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+	ixgbe_atr_get_vlan_id_82599(input, &vlan_id);
+	ixgbe_atr_get_src_port_82599(input, &src_port);
+	ixgbe_atr_get_dst_port_82599(input, &dst_port);
+	ixgbe_atr_get_flex_byte_82599(input, &flex_bytes);
+
+	fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
+
+	/* Now figure out if we're IPv4 or IPv6 */
+	if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) {
+		/* IPv6 */
+		ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2,
+	                                     &src_ipv6_3, &src_ipv6_4);
+
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3);
+		/* The last 4 bytes is the same register as IPv4 */
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4);
+
+		fdircmd |= IXGBE_FDIRCMD_IPV6;
+		fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH;
+	} else {
+		/* IPv4 */
+		ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4);
+
+	}
+
+	ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id |
+	                            (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT)));
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port |
+	                       (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
+
+	fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW;
+	fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE;
+	fdircmd |= IXGBE_FDIRCMD_LAST;
+	fdircmd |= IXGBE_FDIRCMD_QUEUE_EN;
+	fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+
+	return 0;
+}
+/**
  *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
  *  @hw: pointer to hardware structure
  *  @reg: analog register to read
@@ -1056,8 +2142,9 @@ s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
 s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
 {
 	u32 q_num;
+	s32 ret_val;
 
-	ixgbe_start_hw_generic(hw);
+	ret_val = ixgbe_start_hw_generic(hw);
 
 	/* Clear the rate limiters */
 	for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) {
@@ -1066,7 +2153,13 @@ s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
 	}
 	IXGBE_WRITE_FLUSH(hw);
 
-	return 0;
+	/* We need to run link autotry after the driver loads */
+	hw->mac.autotry_restart = true;
+
+	if (ret_val == 0)
+		ret_val = ixgbe_verify_fw_version_82599(hw);
+
+	return ret_val;
 }
 
 /**
@@ -1093,53 +2186,100 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
 u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 {
 	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
 	u8 comp_codes_10g = 0;
 
-	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82599:
-	case IXGBE_DEV_ID_82599_KX4:
-		/* Default device ID is mezzanine card KX/KX4 */
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
-		                  IXGBE_PHYSICAL_LAYER_1000BASE_KX);
+	hw->phy.ops.identify(hw);
+
+	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_cu_unknown) {
+		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+				     &ext_ability);
+		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	}
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
+			    IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+			goto out;
+		} else
+			/* SFI mode so read SFP module */
+			goto sfp_check;
 		break;
-	case IXGBE_DEV_ID_82599_SFP:
-		hw->phy.ops.identify_sfp(hw);
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
+		goto out;
+		break;
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+			goto out;
+		} else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
+			goto sfp_check;
+		break;
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+		goto out;
+		break;
+	default:
+		goto out;
+		break;
+	}
 
-		switch (hw->phy.sfp_type) {
-		case ixgbe_sfp_type_da_cu:
-		case ixgbe_sfp_type_da_cu_core0:
-		case ixgbe_sfp_type_da_cu_core1:
-			physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
-			break;
-		case ixgbe_sfp_type_sr:
+sfp_check:
+	/* SFP check must be done last since DA modules are sometimes used to
+	 * test KR mode -  we need to id KR mode correctly before SFP module.
+	 * Call identify_sfp because the pluggable module may have changed */
+	hw->phy.ops.identify_sfp(hw);
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		goto out;
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_tw_tyco:
+	case ixgbe_phy_tw_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			break;
-		case ixgbe_sfp_type_lr:
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			break;
-		case ixgbe_sfp_type_srlr_core0:
-		case ixgbe_sfp_type_srlr_core1:
-			hw->phy.ops.read_i2c_eeprom(hw,
-			                            IXGBE_SFF_10GBE_COMP_CODES,
-			                            &comp_codes_10g);
-			if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
-				physical_layer =
-				                IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
-				physical_layer =
-				                IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			else
-				physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-		default:
-			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-			break;
-		}
 		break;
 	default:
-		physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
 	}
 
+out:
 	return physical_layer;
 }
 
@@ -1187,6 +2327,138 @@ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
 	return 0;
 }
 
+/**
+ *  ixgbe_get_device_caps_82599 - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word with the extra device capabilities
+ *
+ *  This function will read the EEPROM location for the device capabilities,
+ *  and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_offset_82599 - SAN MAC address offset for 82599
+ *  @hw: pointer to hardware structure
+ *  @san_mac_offset: SAN MAC address offset
+ *
+ *  This function will read the EEPROM location for the SAN MAC address
+ *  pointer, and returns the value at that location.  This is used in both
+ *  get and set mac_addr routines.
+ **/
+s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw,
+                                        u16 *san_mac_offset)
+{
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.
+	 */
+	hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_82599 - SAN MAC address retrieval for 82599
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Reads the SAN MAC address from the EEPROM, if it's available.  This is
+ *  per-port, so set_lan_id() must be called before reading the addresses.
+ *  set_lan_id() is called by identify_sfp(), but this cannot be relied
+ *  upon for non-SFP connections, so we must call it here.
+ **/
+s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	u16 san_mac_data, san_mac_offset;
+	u8 i;
+
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.  If they're not, no point in calling set_lan_id() here.
+	 */
+	ixgbe_get_san_mac_addr_offset_82599(hw, &san_mac_offset);
+
+	if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
+		/*
+		 * No addresses available in this EEPROM.  It's not an
+		 * error though, so just wipe the local address and return.
+		 */
+		for (i = 0; i < 6; i++)
+			san_mac_addr[i] = 0xFF;
+
+		goto san_mac_addr_out;
+	}
+
+	/* make sure we know which port we need to program */
+	hw->mac.ops.set_lan_id(hw);
+	/* apply the port offset to the address offset */
+	(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+	                 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+	for (i = 0; i < 3; i++) {
+		hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
+		san_mac_addr[i * 2] = (u8)(san_mac_data);
+		san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
+		san_mac_offset++;
+	}
+
+san_mac_addr_out:
+	return 0;
+}
+
+/**
+ *  ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ *  @hw: pointer to hardware structure
+ *
+ *  Verifies that installed the firmware version is 0.6 or higher
+ *  for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
+ *
+ *  Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
+ *  if the FW version is not supported.
+ **/
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM_VERSION;
+	u16 fw_offset, fw_ptp_cfg_offset;
+	u16 fw_version = 0;
+
+	/* firmware check is only necessary for SFI devices */
+	if (hw->phy.media_type != ixgbe_media_type_fiber) {
+		status = 0;
+		goto fw_version_out;
+	}
+
+	/* get the offset to the Firmware Module block */
+	hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+	if ((fw_offset == 0) || (fw_offset == 0xFFFF))
+		goto fw_version_out;
+
+	/* get the offset to the Pass Through Patch Configuration block */
+	hw->eeprom.ops.read(hw, (fw_offset +
+	                         IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
+	                         &fw_ptp_cfg_offset);
+
+	if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
+		goto fw_version_out;
+
+	/* get the firmware version */
+	hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
+	                         IXGBE_FW_PATCH_VERSION_4),
+	                         &fw_version);
+
+	if (fw_version > 0x5)
+		status = 0;
+
+fw_version_out:
+	return status;
+}
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -1196,6 +2468,8 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_82599,
+	.get_device_caps        = &ixgbe_get_device_caps_82599,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
 	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
@@ -1220,7 +2494,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.disable_mc             = &ixgbe_disable_mc_generic,
 	.clear_vfta             = &ixgbe_clear_vfta_82599,
 	.set_vfta               = &ixgbe_set_vfta_82599,
-	.setup_fc               = &ixgbe_setup_fc_generic,
+	.fc_enable               = &ixgbe_fc_enable_generic,
 	.init_uta_tables        = &ixgbe_init_uta_tables_82599,
 	.setup_sfp              = &ixgbe_setup_sfp_modules_82599,
 };
@@ -1236,6 +2510,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 static struct ixgbe_phy_operations phy_ops_82599 = {
 	.identify               = &ixgbe_identify_phy_82599,
 	.identify_sfp           = &ixgbe_identify_sfp_module_generic,
+	.init			= &ixgbe_init_phy_ops_82599,
 	.reset                  = &ixgbe_reset_phy_generic,
 	.read_reg               = &ixgbe_read_phy_reg_generic,
 	.write_reg              = &ixgbe_write_phy_reg_generic,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 186a65069b3..96a18595377 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -28,6 +28,8 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
 
 #include "ixgbe.h"
 #include "ixgbe_common.h"
@@ -71,12 +73,6 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 	/* Identify the PHY */
 	hw->phy.ops.identify(hw);
 
-	/*
-	 * Store MAC address from RAR0, clear receive address registers, and
-	 * clear the multicast table
-	 */
-	hw->mac.ops.init_rx_addrs(hw);
-
 	/* Clear the VLAN filter table */
 	hw->mac.ops.clear_vfta(hw);
 
@@ -89,6 +85,9 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
 	IXGBE_WRITE_FLUSH(hw);
 
+	/* Setup flow control */
+	ixgbe_setup_fc(hw, 0);
+
 	/* Clear adapter stopped flag */
 	hw->adapter_stopped = false;
 
@@ -107,13 +106,17 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
  **/
 s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
 {
+	s32 status;
+
 	/* Reset the hardware */
-	hw->mac.ops.reset_hw(hw);
+	status = hw->mac.ops.reset_hw(hw);
 
-	/* Start the HW */
-	hw->mac.ops.start_hw(hw);
+	if (status == 0) {
+		/* Start the HW */
+		status = hw->mac.ops.start_hw(hw);
+	}
 
-	return 0;
+	return status;
 }
 
 /**
@@ -1362,15 +1365,14 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
  *  Drivers using secondary unicast addresses must set user_set_promisc when
  *  manually putting the device into promiscuous mode.
  **/
-s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
-                              u32 addr_count, ixgbe_mc_addr_itr next)
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
+				      struct list_head *uc_list)
 {
-	u8 *addr;
 	u32 i;
 	u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
 	u32 uc_addr_in_use;
 	u32 fctrl;
-	u32 vmdq;
+	struct netdev_hw_addr *ha;
 
 	/*
 	 * Clear accounting of old secondary address list,
@@ -1388,10 +1390,9 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
 	}
 
 	/* Add the new addresses */
-	for (i = 0; i < addr_count; i++) {
+	list_for_each_entry(ha, uc_list, list) {
 		hw_dbg(hw, " Adding the secondary addresses:\n");
-		addr = next(hw, &addr_list, &vmdq);
-		ixgbe_add_uc_addr(hw, addr, vmdq);
+		ixgbe_add_uc_addr(hw, ha->addr, 0);
 	}
 
 	if (hw->addr_ctrl.overflow_promisc) {
@@ -1583,19 +1584,30 @@ s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_fc_enable - Enable flow control
+ *  ixgbe_fc_enable_generic - Enable flow control
  *  @hw: pointer to hardware structure
  *  @packetbuf_num: packet buffer number (0-7)
  *
  *  Enable flow control according to the current settings.
  **/
-s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 {
 	s32 ret_val = 0;
-	u32 mflcn_reg;
-	u32 fccfg_reg;
+	u32 mflcn_reg, fccfg_reg;
 	u32 reg;
+	u32 rx_pba_size;
 
+#ifdef CONFIG_DCB
+	if (hw->fc.requested_mode == ixgbe_fc_pfc)
+		goto out;
+
+#endif /* CONFIG_DCB */
+	/* Negotiate the fc mode to use */
+	ret_val = ixgbe_fc_autoneg(hw);
+	if (ret_val)
+		goto out;
+
+	/* Disable any previous flow control settings */
 	mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
 	mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE);
 
@@ -1615,7 +1627,10 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
 	 */
 	switch (hw->fc.current_mode) {
 	case ixgbe_fc_none:
-		/* Flow control completely disabled by software override. */
+		/*
+		 * Flow control is disabled by software override or autoneg.
+		 * The code below will actually disable it in the HW.
+		 */
 		break;
 	case ixgbe_fc_rx_pause:
 		/*
@@ -1644,7 +1659,7 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
 	case ixgbe_fc_pfc:
 		goto out;
 		break;
-#endif
+#endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
 		ret_val = -IXGBE_ERR_CONFIG;
@@ -1652,25 +1667,48 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
 		break;
 	}
 
-	/* Enable 802.3x based flow control settings. */
+	/* Set 802.3x based flow control settings. */
+	mflcn_reg |= IXGBE_MFLCN_DPF;
 	IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
 	IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
 
-	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
-	if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
-		if (hw->fc.send_xon)
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num),
-			                (hw->fc.low_water | IXGBE_FCRTL_XONE));
-		else
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num),
-			                hw->fc.low_water);
+	reg = IXGBE_READ_REG(hw, IXGBE_MTQC);
+	/* Thresholds are different for link flow control when in DCB mode */
+	if (reg & IXGBE_MTQC_RT_ENA) {
+		rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
+
+		/* Always disable XON for LFC when in DCB mode */
+		reg = (rx_pba_size >> 5) & 0xFFE0;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), reg);
+
+		reg = (rx_pba_size >> 2) & 0xFFE0;
+		if (hw->fc.current_mode & ixgbe_fc_tx_pause)
+			reg |= IXGBE_FCRTH_FCEN;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), reg);
+	} else {
+		/*
+		 * Set up and enable Rx high/low water mark thresholds,
+		 * enable XON.
+		 */
+		if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
+			if (hw->fc.send_xon) {
+				IXGBE_WRITE_REG(hw,
+				              IXGBE_FCRTL_82599(packetbuf_num),
+			                      (hw->fc.low_water |
+				              IXGBE_FCRTL_XONE));
+			} else {
+				IXGBE_WRITE_REG(hw,
+				              IXGBE_FCRTL_82599(packetbuf_num),
+				              hw->fc.low_water);
+			}
 
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num),
-		                (hw->fc.high_water | IXGBE_FCRTH_FCEN));
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num),
+			               (hw->fc.high_water | IXGBE_FCRTH_FCEN));
+		}
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num));
+	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
 	if ((packetbuf_num & 1) == 0)
 		reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
 	else
@@ -1687,100 +1725,41 @@ out:
  *  ixgbe_fc_autoneg - Configure flow control
  *  @hw: pointer to hardware structure
  *
- *  Negotiates flow control capabilities with link partner using autoneg and
- *  applies the results.
+ *  Compares our advertised flow control capabilities to those advertised by
+ *  our link partner, and determines the proper flow control mode to use.
  **/
 s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 {
 	s32 ret_val = 0;
-	u32 i, reg, pcs_anadv_reg, pcs_lpab_reg;
-
-	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+	ixgbe_link_speed speed;
+	u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+	bool link_up;
 
 	/*
-	 * The possible values of fc.current_mode are:
-	 * 0:  Flow control is completely disabled
-	 * 1:  Rx flow control is enabled (we can receive pause frames,
-	 *     but not send pause frames).
-	 * 2:  Tx flow control is enabled (we can send pause frames but
-	 *     we do not support receiving pause frames).
-	 * 3:  Both Rx and Tx flow control (symmetric) are enabled.
-	 * 4:  Priority Flow Control is enabled.
-	 * other: Invalid.
+	 * AN should have completed when the cable was plugged in.
+	 * Look for reasons to bail out.  Bail out if:
+	 * - FC autoneg is disabled, or if
+	 * - we don't have multispeed fiber, or if
+	 * - we're not running at 1G, or if
+	 * - link is not up, or if
+	 * - link is up but AN did not complete, or if
+	 * - link is up and AN completed but timed out
+	 *
+	 * Since we're being called from an LSC, link is already know to be up.
+	 * So use link_up_wait_to_complete=false.
 	 */
-	switch (hw->fc.current_mode) {
-	case ixgbe_fc_none:
-		/* Flow control completely disabled by software override. */
-		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
-		break;
-	case ixgbe_fc_rx_pause:
-		/*
-		 * Rx Flow control is enabled and Tx Flow control is
-		 * disabled by software override. Since there really
-		 * isn't a way to advertise that we are capable of RX
-		 * Pause ONLY, we will advertise that we support both
-		 * symmetric and asymmetric Rx PAUSE.  Later, we will
-		 * disable the adapter's ability to send PAUSE frames.
-		 */
-		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
-		break;
-	case ixgbe_fc_tx_pause:
-		/*
-		 * Tx Flow control is enabled, and Rx Flow control is
-		 * disabled by software override.
-		 */
-		reg |= (IXGBE_PCS1GANA_ASM_PAUSE);
-		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE);
-		break;
-	case ixgbe_fc_full:
-		/* Flow control (both Rx and Tx) is enabled by SW override. */
-		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
-		break;
-#ifdef CONFIG_DCB
-	case ixgbe_fc_pfc:
-		goto out;
-		break;
-#endif
-	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = -IXGBE_ERR_CONFIG;
-		goto out;
-		break;
-	}
-
-	IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
-	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
-
-	/* Set PCS register for autoneg */
-	/* Enable and restart autoneg */
-	reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
-
-	/* Disable AN timeout */
-	if (hw->fc.strict_ieee)
-		reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
-
-	hw_dbg(hw, "Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg);
-	IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
-
-	/* See if autonegotiation has succeeded */
-	hw->mac.autoneg_succeeded = 0;
-	for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
-		msleep(10);
-		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-		if ((reg & (IXGBE_PCS1GLSTA_LINK_OK |
-		     IXGBE_PCS1GLSTA_AN_COMPLETE)) ==
-		    (IXGBE_PCS1GLSTA_LINK_OK |
-		     IXGBE_PCS1GLSTA_AN_COMPLETE)) {
-			if (!(reg & IXGBE_PCS1GLSTA_AN_TIMED_OUT))
-				hw->mac.autoneg_succeeded = 1;
-			break;
-		}
-	}
-
-	if (!hw->mac.autoneg_succeeded) {
-		/* Autoneg failed to achieve a link, so we turn fc off */
-		hw->fc.current_mode = ixgbe_fc_none;
-		hw_dbg(hw, "Flow Control = NONE.\n");
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+
+	if (hw->fc.disable_fc_autoneg ||
+	    !hw->phy.multispeed_fiber ||
+	    (speed != IXGBE_LINK_SPEED_1GB_FULL) ||
+	    !link_up ||
+	    ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+	    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+		hw_dbg(hw, "Autoneg FC was skipped.\n");
 		goto out;
 	}
 
@@ -1823,21 +1802,23 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 		hw_dbg(hw, "Flow Control = NONE.\n");
 	}
 
+	/* Record that current_mode is the result of a successful autoneg */
+	hw->fc.fc_was_autonegged = true;
+
 out:
 	return ret_val;
 }
 
 /**
- *  ixgbe_setup_fc_generic - Set up flow control
+ *  ixgbe_setup_fc - Set up flow control
  *  @hw: pointer to hardware structure
  *
- *  Sets up flow control.
+ *  Called at init time to set up flow control.
  **/
-s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 {
 	s32 ret_val = 0;
-	ixgbe_link_speed speed;
-	bool link_up;
+	u32 reg;
 
 #ifdef CONFIG_DCB
 	if (hw->fc.requested_mode == ixgbe_fc_pfc) {
@@ -1866,7 +1847,7 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 
 	/*
 	 * Validate the requested mode.  Strict IEEE mode does not allow
-	 * ixgbe_fc_rx_pause because it will cause testing anomalies.
+	 * ixgbe_fc_rx_pause because it will cause us to fail at UNH.
 	 */
 	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
 		hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict "
@@ -1883,21 +1864,77 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 		hw->fc.requested_mode = ixgbe_fc_full;
 
 	/*
-	 * Save off the requested flow control mode for use later.  Depending
-	 * on the link partner's capabilities, we may or may not use this mode.
+	 * Set up the 1G flow control advertisement registers so the HW will be
+	 * able to do fc autoneg once the cable is plugged in.  If we end up
+	 * using 10g instead, this is harmless.
 	 */
-	hw->fc.current_mode = hw->fc.requested_mode;
-
-	/* Decide whether to use autoneg or not. */
-	hw->mac.ops.check_link(hw, &speed, &link_up, false);
-	if (!hw->fc.disable_fc_autoneg && hw->phy.multispeed_fiber &&
-	    (speed == IXGBE_LINK_SPEED_1GB_FULL))
-		ret_val = ixgbe_fc_autoneg(hw);
+	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
 
-	if (ret_val)
+	/*
+	 * The possible values of fc.requested_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+#ifdef CONFIG_DCB
+	 * 4: Priority Flow Control is enabled.
+#endif
+	 * other: Invalid.
+	 */
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_none:
+		/* Flow control completely disabled by software override. */
+		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		reg |= (IXGBE_PCS1GANA_ASM_PAUSE);
+		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE);
+		break;
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		break;
+#ifdef CONFIG_DCB
+	case ixgbe_fc_pfc:
+		goto out;
+		break;
+#endif /* CONFIG_DCB */
+	default:
+		hw_dbg(hw, "Flow control param set incorrectly\n");
+		ret_val = -IXGBE_ERR_CONFIG;
 		goto out;
+		break;
+	}
 
-	ret_val = ixgbe_fc_enable(hw, packetbuf_num);
+	IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
+	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
+
+	/* Enable and restart autoneg to inform the link partner */
+	reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
+
+	/* Disable AN timeout */
+	if (hw->fc.strict_ieee)
+		reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
+
+	IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
+	hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
 
 out:
 	return ret_val;
@@ -2044,6 +2081,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 	hw->mac.ops.check_link(hw, &speed, &link_up, false);
 
 	if (!link_up) {
+		autoc_reg |= IXGBE_AUTOC_AN_RESTART;
 		autoc_reg |= IXGBE_AUTOC_FLU;
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
 		msleep(10);
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index dd260890ad0..0d34d4d8244 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -59,13 +59,13 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
 s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
                                       u32 mc_addr_count,
                                       ixgbe_mc_addr_itr func);
-s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
-                                      u32 addr_count, ixgbe_mc_addr_itr func);
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
+				      struct list_head *uc_list);
 s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
 s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
 s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
-s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num);
-s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packtetbuf_num);
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packtetbuf_num);
 s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw);
 
 s32 ixgbe_validate_mac_addr(u8 *mac_addr);
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index 62206273d88..f30263898eb 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -294,6 +294,9 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw,
 	u32 reg, rx_pba_size;
 	u8  i;
 
+	if (!dcb_config->pfc_mode_enable)
+		goto out;
+
 	/* Enable Transmit Priority Flow Control */
 	reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
 	reg &= ~IXGBE_RMCS_TFCE_802_3X;
@@ -341,6 +344,7 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw,
 	/* Configure flow control refresh threshold value */
 	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, 0x3400);
 
+out:
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index f4417fc3b0f..589f62c7062 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -295,7 +295,7 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw,
 	/* If PFC is disabled globally then fall back to LFC. */
 	if (!dcb_config->pfc_mode_enable) {
 		for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
-			hw->mac.ops.setup_fc(hw, i);
+			hw->mac.ops.fc_enable(hw, i);
 		goto out;
 	}
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index bd0a0c27695..d56890f5c9d 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -28,15 +28,22 @@
 
 #include "ixgbe.h"
 #include <linux/dcbnl.h>
+#include "ixgbe_dcb_82598.h"
+#include "ixgbe_dcb_82599.h"
 
 /* Callbacks for DCB netlink in the kernel */
 #define BIT_DCB_MODE	0x01
 #define BIT_PFC		0x02
 #define BIT_PG_RX	0x04
 #define BIT_PG_TX	0x08
-#define BIT_BCN         0x10
+#define BIT_RESETLINK   0x40
 #define BIT_LINKSPEED   0x80
 
+/* Responses for the DCB_C_SET_ALL command */
+#define DCB_HW_CHG_RST  0  /* DCB configuration changed with reset */
+#define DCB_NO_HW_CHG   1  /* DCB configuration did not change */
+#define DCB_HW_CHG      2  /* DCB configuration changed, no reset */
+
 int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
                        struct ixgbe_dcb_config *dst_dcb_cfg, int tc_max)
 {
@@ -124,15 +131,12 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 
 		if (netif_running(netdev))
 			netdev->netdev_ops->ndo_stop(netdev);
-		ixgbe_reset_interrupt_capability(adapter);
-		ixgbe_napi_del_all(adapter);
-		INIT_LIST_HEAD(&netdev->napi_list);
-		kfree(adapter->tx_ring);
-		kfree(adapter->rx_ring);
-		adapter->tx_ring = NULL;
-		adapter->rx_ring = NULL;
+		ixgbe_clear_interrupt_scheme(adapter);
 
-		adapter->hw.fc.requested_mode = ixgbe_fc_pfc;
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+			adapter->last_lfc_mode = adapter->hw.fc.current_mode;
+			adapter->hw.fc.requested_mode = ixgbe_fc_none;
+		}
 		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
 		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
 		ixgbe_init_interrupt_scheme(adapter);
@@ -141,17 +145,13 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 	} else {
 		/* Turn off DCB */
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-			adapter->hw.fc.requested_mode = ixgbe_fc_default;
 			if (netif_running(netdev))
 				netdev->netdev_ops->ndo_stop(netdev);
-			ixgbe_reset_interrupt_capability(adapter);
-			ixgbe_napi_del_all(adapter);
-			INIT_LIST_HEAD(&netdev->napi_list);
-			kfree(adapter->tx_ring);
-			kfree(adapter->rx_ring);
-			adapter->tx_ring = NULL;
-			adapter->rx_ring = NULL;
+			ixgbe_clear_interrupt_scheme(adapter);
 
+			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+			adapter->temp_dcb_cfg.pfc_mode_enable = false;
+			adapter->dcb_cfg.pfc_mode_enable = false;
 			adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
 			adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
 			ixgbe_init_interrupt_scheme(adapter);
@@ -167,10 +167,15 @@ static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
 					 u8 *perm_addr)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	int i;
+	int i, j;
 
 	for (i = 0; i < netdev->addr_len; i++)
 		perm_addr[i] = adapter->hw.mac.perm_addr[i];
+
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		for (j = 0; j < netdev->addr_len; j++, i++)
+			perm_addr[i] = adapter->hw.mac.san_addr[j];
+	}
 }
 
 static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc,
@@ -197,8 +202,10 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc,
 	    (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent !=
 	     adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent) ||
 	    (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap !=
-	     adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap))
+	     adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap)) {
 		adapter->dcb_set_bitmap |= BIT_PG_TX;
+		adapter->dcb_set_bitmap |= BIT_RESETLINK;
+	}
 }
 
 static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
@@ -209,8 +216,10 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
 	adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] = bw_pct;
 
 	if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
-	    adapter->dcb_cfg.bw_percentage[0][bwg_id])
+	    adapter->dcb_cfg.bw_percentage[0][bwg_id]) {
 		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_RESETLINK;
+	}
 }
 
 static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc,
@@ -237,8 +246,10 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc,
 	    (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent !=
 	     adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent) ||
 	    (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap !=
-	     adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap))
+	     adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap)) {
 		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_RESETLINK;
+	}
 }
 
 static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
@@ -249,8 +260,10 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
 	adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] = bw_pct;
 
 	if (adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] !=
-	    adapter->dcb_cfg.bw_percentage[1][bwg_id])
+	    adapter->dcb_cfg.bw_percentage[1][bwg_id]) {
 		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_RESETLINK;
+	}
 }
 
 static void ixgbe_dcbnl_get_pg_tc_cfg_tx(struct net_device *netdev, int tc,
@@ -319,28 +332,60 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	int ret;
 
-	adapter->dcb_set_bitmap &= ~BIT_BCN;	/* no set for BCN */
 	if (!adapter->dcb_set_bitmap)
-		return 1;
+		return DCB_NO_HW_CHG;
 
-	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
-		msleep(1);
+	/*
+	 * Only take down the adapter if the configuration change
+	 * requires a reset.
+	 */
+	if (adapter->dcb_set_bitmap & BIT_RESETLINK) {
+		while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
+			msleep(1);
 
-	if (netif_running(netdev))
-		ixgbe_down(adapter);
+		if (netif_running(netdev))
+			ixgbe_down(adapter);
+	}
 
 	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
 				 adapter->ring_feature[RING_F_DCB].indices);
 	if (ret) {
-		clear_bit(__IXGBE_RESETTING, &adapter->state);
-		return ret;
+		if (adapter->dcb_set_bitmap & BIT_RESETLINK)
+			clear_bit(__IXGBE_RESETTING, &adapter->state);
+		return DCB_NO_HW_CHG;
+	}
+
+	if (adapter->dcb_cfg.pfc_mode_enable) {
+		if ((adapter->hw.mac.type != ixgbe_mac_82598EB) &&
+			(adapter->hw.fc.current_mode != ixgbe_fc_pfc))
+			adapter->last_lfc_mode = adapter->hw.fc.current_mode;
+		adapter->hw.fc.requested_mode = ixgbe_fc_pfc;
+	} else {
+		if (adapter->hw.mac.type != ixgbe_mac_82598EB)
+			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+		else
+			adapter->hw.fc.requested_mode = ixgbe_fc_none;
 	}
 
-	if (netif_running(netdev))
-		ixgbe_up(adapter);
+	if (adapter->dcb_set_bitmap & BIT_RESETLINK) {
+		if (netif_running(netdev))
+			ixgbe_up(adapter);
+		ret = DCB_HW_CHG_RST;
+	} else if (adapter->dcb_set_bitmap & BIT_PFC) {
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+			ixgbe_dcb_config_pfc_82598(&adapter->hw,
+			                           &adapter->dcb_cfg);
+		else if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+			ixgbe_dcb_config_pfc_82599(&adapter->hw,
+			                           &adapter->dcb_cfg);
+		ret = DCB_HW_CHG;
+	}
+	if (adapter->dcb_cfg.pfc_mode_enable)
+		adapter->hw.fc.current_mode = ixgbe_fc_pfc;
 
+	if (adapter->dcb_set_bitmap & BIT_RESETLINK)
+		clear_bit(__IXGBE_RESETTING, &adapter->state);
 	adapter->dcb_set_bitmap = 0x00;
-	clear_bit(__IXGBE_RESETTING, &adapter->state);
 	return ret;
 }
 
@@ -416,11 +461,17 @@ static u8 ixgbe_dcbnl_getpfcstate(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-	return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
+	return adapter->dcb_cfg.pfc_mode_enable;
 }
 
 static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state)
 {
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->temp_dcb_cfg.pfc_mode_enable = state;
+	if (adapter->temp_dcb_cfg.pfc_mode_enable !=
+		adapter->dcb_cfg.pfc_mode_enable)
+		adapter->dcb_set_bitmap |= BIT_PFC;
 	return;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index f0a20facc65..86f4f3e36f2 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -67,6 +67,9 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"rx_over_errors", IXGBE_STAT(net_stats.rx_over_errors)},
 	{"rx_crc_errors", IXGBE_STAT(net_stats.rx_crc_errors)},
 	{"rx_frame_errors", IXGBE_STAT(net_stats.rx_frame_errors)},
+	{"hw_rsc_count", IXGBE_STAT(rsc_count)},
+	{"fdir_match", IXGBE_STAT(stats.fdirmatch)},
+	{"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
 	{"rx_fifo_errors", IXGBE_STAT(net_stats.rx_fifo_errors)},
 	{"rx_missed_errors", IXGBE_STAT(net_stats.rx_missed_errors)},
 	{"tx_aborted_errors", IXGBE_STAT(net_stats.tx_aborted_errors)},
@@ -90,6 +93,14 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
 	{"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
 	{"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)},
+#ifdef IXGBE_FCOE
+	{"fcoe_bad_fccrc", IXGBE_STAT(stats.fccrc)},
+	{"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)},
+	{"rx_fcoe_packets", IXGBE_STAT(stats.fcoeprc)},
+	{"rx_fcoe_dwords", IXGBE_STAT(stats.fcoedwrc)},
+	{"tx_fcoe_packets", IXGBE_STAT(stats.fcoeptc)},
+	{"tx_fcoe_dwords", IXGBE_STAT(stats.fcoedwtc)},
+#endif /* IXGBE_FCOE */
 };
 
 #define IXGBE_QUEUE_STATS_LEN \
@@ -109,6 +120,13 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
                          IXGBE_PB_STATS_LEN + \
                          IXGBE_QUEUE_STATS_LEN)
 
+static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Register test  (offline)", "Eeprom test    (offline)",
+	"Interrupt test (offline)", "Loopback test  (offline)",
+	"Link test   (on/offline)"
+};
+#define IXGBE_TEST_LEN sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN
+
 static int ixgbe_get_settings(struct net_device *netdev,
                               struct ethtool_cmd *ecmd)
 {
@@ -120,11 +138,12 @@ static int ixgbe_get_settings(struct net_device *netdev,
 	ecmd->supported = SUPPORTED_10000baseT_Full;
 	ecmd->autoneg = AUTONEG_ENABLE;
 	ecmd->transceiver = XCVR_EXTERNAL;
-	if (hw->phy.media_type == ixgbe_media_type_copper) {
+	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+	    (hw->mac.type == ixgbe_mac_82599EB)) {
 		ecmd->supported |= (SUPPORTED_1000baseT_Full |
-		                    SUPPORTED_TP | SUPPORTED_Autoneg);
+		                    SUPPORTED_Autoneg);
 
-		ecmd->advertising = (ADVERTISED_TP | ADVERTISED_Autoneg);
+		ecmd->advertising = ADVERTISED_Autoneg;
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
 			ecmd->advertising |= ADVERTISED_10000baseT_Full;
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
@@ -139,7 +158,15 @@ static int ixgbe_get_settings(struct net_device *netdev,
 			ecmd->advertising |= (ADVERTISED_10000baseT_Full |
 					      ADVERTISED_1000baseT_Full);
 
-		ecmd->port = PORT_TP;
+		if (hw->phy.media_type == ixgbe_media_type_copper) {
+			ecmd->supported |= SUPPORTED_TP;
+			ecmd->advertising |= ADVERTISED_TP;
+			ecmd->port = PORT_TP;
+		} else {
+			ecmd->supported |= SUPPORTED_FIBRE;
+			ecmd->advertising |= ADVERTISED_FIBRE;
+			ecmd->port = PORT_FIBRE;
+		}
 	} else if (hw->phy.media_type == ixgbe_media_type_backplane) {
 		/* Set as FIBRE until SERDES defined in kernel */
 		switch (hw->device_id) {
@@ -187,16 +214,10 @@ static int ixgbe_set_settings(struct net_device *netdev,
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 advertised, old;
-	s32 err;
+	s32 err = 0;
 
-	switch (hw->phy.media_type) {
-	case ixgbe_media_type_fiber:
-		if ((ecmd->autoneg == AUTONEG_ENABLE) ||
-		    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
-			return -EINVAL;
-		/* in this case we currently only support 10Gb/FULL */
-		break;
-	case ixgbe_media_type_copper:
+	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+	    (hw->mac.type == ixgbe_mac_82599EB)) {
 		/* 10000/copper and 1000/copper must autoneg
 		 * this function does not support any duplex forcing, but can
 		 * limit the advertising of the adapter to only 10000 or 1000 */
@@ -212,20 +233,23 @@ static int ixgbe_set_settings(struct net_device *netdev,
 			advertised |= IXGBE_LINK_SPEED_1GB_FULL;
 
 		if (old == advertised)
-			break;
+			return err;
 		/* this sets the link speed and restarts auto-neg */
+		hw->mac.autotry_restart = true;
 		err = hw->mac.ops.setup_link_speed(hw, advertised, true, true);
 		if (err) {
 			DPRINTK(PROBE, INFO,
 			        "setup link failed with code %d\n", err);
 			hw->mac.ops.setup_link_speed(hw, old, true, true);
 		}
-		break;
-	default:
-		break;
+	} else {
+		/* in this case we currently only support 10Gb/FULL */
+		if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+		    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+			return -EINVAL;
 	}
 
-	return 0;
+	return err;
 }
 
 static void ixgbe_get_pauseparam(struct net_device *netdev,
@@ -245,6 +269,13 @@ static void ixgbe_get_pauseparam(struct net_device *netdev,
 	else
 		pause->autoneg = 1;
 
+#ifdef CONFIG_DCB
+	if (hw->fc.current_mode == ixgbe_fc_pfc) {
+		pause->rx_pause = 0;
+		pause->tx_pause = 0;
+	}
+
+#endif
 	if (hw->fc.current_mode == ixgbe_fc_rx_pause) {
 		pause->rx_pause = 1;
 	} else if (hw->fc.current_mode == ixgbe_fc_tx_pause) {
@@ -260,24 +291,46 @@ static int ixgbe_set_pauseparam(struct net_device *netdev,
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_fc_info fc;
+
+#ifdef CONFIG_DCB
+	if (adapter->dcb_cfg.pfc_mode_enable ||
+		((hw->mac.type == ixgbe_mac_82598EB) &&
+		(adapter->flags & IXGBE_FLAG_DCB_ENABLED)))
+		return -EINVAL;
+
+#endif
+
+	fc = hw->fc;
 
 	if (pause->autoneg != AUTONEG_ENABLE)
-		hw->fc.disable_fc_autoneg = true;
+		fc.disable_fc_autoneg = true;
 	else
-		hw->fc.disable_fc_autoneg = false;
+		fc.disable_fc_autoneg = false;
 
 	if (pause->rx_pause && pause->tx_pause)
-		hw->fc.requested_mode = ixgbe_fc_full;
+		fc.requested_mode = ixgbe_fc_full;
 	else if (pause->rx_pause && !pause->tx_pause)
-		hw->fc.requested_mode = ixgbe_fc_rx_pause;
+		fc.requested_mode = ixgbe_fc_rx_pause;
 	else if (!pause->rx_pause && pause->tx_pause)
-		hw->fc.requested_mode = ixgbe_fc_tx_pause;
+		fc.requested_mode = ixgbe_fc_tx_pause;
 	else if (!pause->rx_pause && !pause->tx_pause)
-		hw->fc.requested_mode = ixgbe_fc_none;
+		fc.requested_mode = ixgbe_fc_none;
 	else
 		return -EINVAL;
 
-	hw->mac.ops.setup_fc(hw, 0);
+#ifdef CONFIG_DCB
+	adapter->last_lfc_mode = fc.requested_mode;
+#endif
+
+	/* if the thing changed then we'll update and use new autoneg */
+	if (memcmp(&fc, &hw->fc, sizeof(struct ixgbe_fc_info))) {
+		hw->fc = fc;
+		if (netif_running(netdev))
+			ixgbe_reinit_locked(adapter);
+		else
+			ixgbe_reset(adapter);
+	}
 
 	return 0;
 }
@@ -311,10 +364,17 @@ static u32 ixgbe_get_tx_csum(struct net_device *netdev)
 
 static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data)
 {
-	if (data)
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	if (data) {
 		netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-	else
+		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+			netdev->features |= NETIF_F_SCTP_CSUM;
+	} else {
 		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+			netdev->features &= ~NETIF_F_SCTP_CSUM;
+	}
 
 	return 0;
 }
@@ -710,6 +770,7 @@ static void ixgbe_get_drvinfo(struct net_device *netdev,
 	strncpy(drvinfo->fw_version, firmware_version, 32);
 	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
 	drvinfo->n_stats = IXGBE_STATS_LEN;
+	drvinfo->testinfo_len = IXGBE_TEST_LEN;
 	drvinfo->regdump_len = ixgbe_get_regs_len(netdev);
 }
 
@@ -781,7 +842,6 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 				}
 				goto err_setup;
 			}
-			temp_tx_ring[i].v_idx = adapter->tx_ring[i].v_idx;
 		}
 		need_update = true;
 	}
@@ -811,7 +871,6 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 				}
 				goto err_setup;
 			}
-			temp_rx_ring[i].v_idx = adapter->rx_ring[i].v_idx;
 		}
 		need_update = true;
 	}
@@ -851,6 +910,8 @@ err_setup:
 static int ixgbe_get_sset_count(struct net_device *netdev, int sset)
 {
 	switch (sset) {
+	case ETH_SS_TEST:
+		return IXGBE_TEST_LEN;
 	case ETH_SS_STATS:
 		return IXGBE_STATS_LEN;
 	default:
@@ -905,6 +966,10 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
 	int i;
 
 	switch (stringset) {
+	case ETH_SS_TEST:
+		memcpy(data, *ixgbe_gstrings_test,
+		       IXGBE_TEST_LEN * ETH_GSTRING_LEN);
+		break;
 	case ETH_SS_STATS:
 		for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
 			memcpy(p, ixgbe_gstrings_stats[i].stat_string,
@@ -942,6 +1007,815 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
 	}
 }
 
+static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	bool link_up;
+	u32 link_speed = 0;
+	*data = 0;
+
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
+	if (link_up)
+		return *data;
+	else
+		*data = 1;
+	return *data;
+}
+
+/* ethtool register test data */
+struct ixgbe_reg_test {
+	u16 reg;
+	u8  array_len;
+	u8  test_type;
+	u32 mask;
+	u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x40 bytes apart, or in contiguous tables.  We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST	1
+#define SET_READ_TEST	2
+#define WRITE_NO_TEST	3
+#define TABLE32_TEST	4
+#define TABLE64_TEST_LO	5
+#define TABLE64_TEST_HI	6
+
+/* default 82599 register test */
+static struct ixgbe_reg_test reg_test_82599[] = {
+	{ IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+	{ IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
+	{ IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+	{ IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFF80 },
+	{ IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000001, 0x00000001 },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x8001FFFF, 0x800CFFFF },
+	{ IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
+/* default 82598 register test */
+static struct ixgbe_reg_test reg_test_82598[] = {
+	{ IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+	{ IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	/* Enable all four RX queues before testing. */
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+	/* RDH is read-only for 82598, only test RDT. */
+	{ IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+	{ IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TIPG, 1, PATTERN_TEST, 0x000000FF, 0x000000FF },
+	{ IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+	{ IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000003, 0x00000003 },
+	{ IXGBE_DTXCTL, 1, SET_READ_TEST, 0x00000005, 0x00000005 },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x800CFFFF, 0x800CFFFF },
+	{ IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
+#define REG_PATTERN_TEST(R, M, W)                                             \
+{                                                                             \
+	u32 pat, val, before;                                                 \
+	const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
+	for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {                       \
+		before = readl(adapter->hw.hw_addr + R);                      \
+		writel((_test[pat] & W), (adapter->hw.hw_addr + R));          \
+		val = readl(adapter->hw.hw_addr + R);                         \
+		if (val != (_test[pat] & W & M)) {                            \
+			DPRINTK(DRV, ERR, "pattern test reg %04X failed: got "\
+					  "0x%08X expected 0x%08X\n",         \
+				R, val, (_test[pat] & W & M));                \
+			*data = R;                                            \
+			writel(before, adapter->hw.hw_addr + R);              \
+			return 1;                                             \
+		}                                                             \
+		writel(before, adapter->hw.hw_addr + R);                      \
+	}                                                                     \
+}
+
+#define REG_SET_AND_CHECK(R, M, W)                                            \
+{                                                                             \
+	u32 val, before;                                                      \
+	before = readl(adapter->hw.hw_addr + R);                              \
+	writel((W & M), (adapter->hw.hw_addr + R));                           \
+	val = readl(adapter->hw.hw_addr + R);                                 \
+	if ((W & M) != (val & M)) {                                           \
+		DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
+				 "expected 0x%08X\n", R, (val & M), (W & M)); \
+		*data = R;                                                    \
+		writel(before, (adapter->hw.hw_addr + R));                    \
+		return 1;                                                     \
+	}                                                                     \
+	writel(before, (adapter->hw.hw_addr + R));                            \
+}
+
+static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct ixgbe_reg_test *test;
+	u32 value, before, after;
+	u32 i, toggle;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		toggle = 0x7FFFF30F;
+		test = reg_test_82599;
+	} else {
+		toggle = 0x7FFFF3FF;
+		test = reg_test_82598;
+	}
+
+	/*
+	 * Because the status register is such a special case,
+	 * we handle it separately from the rest of the register
+	 * tests.  Some bits are read-only, some toggle, and some
+	 * are writeable on newer MACs.
+	 */
+	before = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS);
+	value = (IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
+	after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
+	if (value != after) {
+		DPRINTK(DRV, ERR, "failed STATUS register test got: "
+		        "0x%08X expected: 0x%08X\n", after, value);
+		*data = 1;
+		return 1;
+	}
+	/* restore previous status */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, before);
+
+	/*
+	 * Perform the remainder of the register test, looping through
+	 * the test table until we either fail or reach the null entry.
+	 */
+	while (test->reg) {
+		for (i = 0; i < test->array_len; i++) {
+			switch (test->test_type) {
+			case PATTERN_TEST:
+				REG_PATTERN_TEST(test->reg + (i * 0x40),
+						test->mask,
+						test->write);
+				break;
+			case SET_READ_TEST:
+				REG_SET_AND_CHECK(test->reg + (i * 0x40),
+						test->mask,
+						test->write);
+				break;
+			case WRITE_NO_TEST:
+				writel(test->write,
+				       (adapter->hw.hw_addr + test->reg)
+				       + (i * 0x40));
+				break;
+			case TABLE32_TEST:
+				REG_PATTERN_TEST(test->reg + (i * 4),
+						test->mask,
+						test->write);
+				break;
+			case TABLE64_TEST_LO:
+				REG_PATTERN_TEST(test->reg + (i * 8),
+						test->mask,
+						test->write);
+				break;
+			case TABLE64_TEST_HI:
+				REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+						test->mask,
+						test->write);
+				break;
+			}
+		}
+		test++;
+	}
+
+	*data = 0;
+	return 0;
+}
+
+static int ixgbe_eeprom_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	if (hw->eeprom.ops.validate_checksum(hw, NULL))
+		*data = 1;
+	else
+		*data = 0;
+	return *data;
+}
+
+static irqreturn_t ixgbe_test_intr(int irq, void *data)
+{
+	struct net_device *netdev = (struct net_device *) data;
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	adapter->test_icr |= IXGBE_READ_REG(&adapter->hw, IXGBE_EICR);
+
+	return IRQ_HANDLED;
+}
+
+static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	struct net_device *netdev = adapter->netdev;
+	u32 mask, i = 0, shared_int = true;
+	u32 irq = adapter->pdev->irq;
+
+	*data = 0;
+
+	/* Hook up test interrupt handler just for this test */
+	if (adapter->msix_entries) {
+		/* NOTE: we don't test MSI-X interrupts here, yet */
+		return 0;
+	} else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+		shared_int = false;
+		if (request_irq(irq, &ixgbe_test_intr, 0, netdev->name,
+				netdev)) {
+			*data = 1;
+			return -1;
+		}
+	} else if (!request_irq(irq, &ixgbe_test_intr, IRQF_PROBE_SHARED,
+	                        netdev->name, netdev)) {
+		shared_int = false;
+	} else if (request_irq(irq, &ixgbe_test_intr, IRQF_SHARED,
+	                       netdev->name, netdev)) {
+		*data = 1;
+		return -1;
+	}
+	DPRINTK(HW, INFO, "testing %s interrupt\n",
+		(shared_int ? "shared" : "unshared"));
+
+	/* Disable all the interrupts */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+	msleep(10);
+
+	/* Test each interrupt */
+	for (; i < 10; i++) {
+		/* Interrupt to test */
+		mask = 1 << i;
+
+		if (!shared_int) {
+			/*
+			 * Disable the interrupts to be reported in
+			 * the cause register and then force the same
+			 * interrupt and see if one gets posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
+			                ~mask & 0x00007FFF);
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+			                ~mask & 0x00007FFF);
+			msleep(10);
+
+			if (adapter->test_icr & mask) {
+				*data = 3;
+				break;
+			}
+		}
+
+		/*
+		 * Enable the interrupt to be reported in the cause
+		 * register and then force the same interrupt and see
+		 * if one gets posted.  If an interrupt was not posted
+		 * to the bus, the test failed.
+		 */
+		adapter->test_icr = 0;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+		msleep(10);
+
+		if (!(adapter->test_icr &mask)) {
+			*data = 4;
+			break;
+		}
+
+		if (!shared_int) {
+			/*
+			 * Disable the other interrupts to be reported in
+			 * the cause register and then force the other
+			 * interrupts and see if any get posted.  If
+			 * an interrupt was posted to the bus, the
+			 * test failed.
+			 */
+			adapter->test_icr = 0;
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
+			                ~mask & 0x00007FFF);
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+			                ~mask & 0x00007FFF);
+			msleep(10);
+
+			if (adapter->test_icr) {
+				*data = 5;
+				break;
+			}
+		}
+	}
+
+	/* Disable all the interrupts */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+	msleep(10);
+
+	/* Unhook test interrupt handler */
+	free_irq(irq, netdev);
+
+	return *data;
+}
+
+static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+	u32 reg_ctl;
+	int i;
+
+	/* shut down the DMA engines now so they can be reinitialized later */
+
+	/* first Rx */
+	reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	reg_ctl &= ~IXGBE_RXCTRL_RXEN;
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_ctl);
+	reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(0));
+	reg_ctl &= ~IXGBE_RXDCTL_ENABLE;
+	IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(0), reg_ctl);
+
+	/* now Tx */
+	reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(0));
+	reg_ctl &= ~IXGBE_TXDCTL_ENABLE;
+	IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(0), reg_ctl);
+	if (hw->mac.type == ixgbe_mac_82599EB) {
+		reg_ctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+		reg_ctl &= ~IXGBE_DMATXCTL_TE;
+		IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg_ctl);
+	}
+
+	ixgbe_reset(adapter);
+
+	if (tx_ring->desc && tx_ring->tx_buffer_info) {
+		for (i = 0; i < tx_ring->count; i++) {
+			struct ixgbe_tx_buffer *buf =
+					&(tx_ring->tx_buffer_info[i]);
+			if (buf->dma)
+				pci_unmap_single(pdev, buf->dma, buf->length,
+				                 PCI_DMA_TODEVICE);
+			if (buf->skb)
+				dev_kfree_skb(buf->skb);
+		}
+	}
+
+	if (rx_ring->desc && rx_ring->rx_buffer_info) {
+		for (i = 0; i < rx_ring->count; i++) {
+			struct ixgbe_rx_buffer *buf =
+					&(rx_ring->rx_buffer_info[i]);
+			if (buf->dma)
+				pci_unmap_single(pdev, buf->dma,
+						 IXGBE_RXBUFFER_2048,
+						 PCI_DMA_FROMDEVICE);
+			if (buf->skb)
+				dev_kfree_skb(buf->skb);
+		}
+	}
+
+	if (tx_ring->desc) {
+		pci_free_consistent(pdev, tx_ring->size, tx_ring->desc,
+		                    tx_ring->dma);
+		tx_ring->desc = NULL;
+	}
+	if (rx_ring->desc) {
+		pci_free_consistent(pdev, rx_ring->size, rx_ring->desc,
+		                    rx_ring->dma);
+		rx_ring->desc = NULL;
+	}
+
+	kfree(tx_ring->tx_buffer_info);
+	tx_ring->tx_buffer_info = NULL;
+	kfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+
+	return;
+}
+
+static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct pci_dev *pdev = adapter->pdev;
+	u32 rctl, reg_data;
+	int i, ret_val;
+
+	/* Setup Tx descriptor ring and Tx buffers */
+
+	if (!tx_ring->count)
+		tx_ring->count = IXGBE_DEFAULT_TXD;
+
+	tx_ring->tx_buffer_info = kcalloc(tx_ring->count,
+	                                  sizeof(struct ixgbe_tx_buffer),
+	                                  GFP_KERNEL);
+	if (!(tx_ring->tx_buffer_info)) {
+		ret_val = 1;
+		goto err_nomem;
+	}
+
+	tx_ring->size = tx_ring->count * sizeof(struct ixgbe_legacy_tx_desc);
+	tx_ring->size = ALIGN(tx_ring->size, 4096);
+	if (!(tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
+						   &tx_ring->dma))) {
+		ret_val = 2;
+		goto err_nomem;
+	}
+	tx_ring->next_to_use = tx_ring->next_to_clean = 0;
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDBAL(0),
+			((u64) tx_ring->dma & 0x00000000FFFFFFFF));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDBAH(0),
+			((u64) tx_ring->dma >> 32));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDLEN(0),
+			tx_ring->count * sizeof(struct ixgbe_legacy_tx_desc));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDH(0), 0);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(0), 0);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data |= IXGBE_HLREG0_TXPADEN;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_DMATXCTL);
+		reg_data |= IXGBE_DMATXCTL_TE;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DMATXCTL, reg_data);
+	}
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_TXDCTL(0));
+	reg_data |= IXGBE_TXDCTL_ENABLE;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(0), reg_data);
+
+	for (i = 0; i < tx_ring->count; i++) {
+		struct ixgbe_legacy_tx_desc *desc = IXGBE_TX_DESC(*tx_ring, i);
+		struct sk_buff *skb;
+		unsigned int size = 1024;
+
+		skb = alloc_skb(size, GFP_KERNEL);
+		if (!skb) {
+			ret_val = 3;
+			goto err_nomem;
+		}
+		skb_put(skb, size);
+		tx_ring->tx_buffer_info[i].skb = skb;
+		tx_ring->tx_buffer_info[i].length = skb->len;
+		tx_ring->tx_buffer_info[i].dma =
+			pci_map_single(pdev, skb->data, skb->len,
+					PCI_DMA_TODEVICE);
+		desc->buffer_addr = cpu_to_le64(tx_ring->tx_buffer_info[i].dma);
+		desc->lower.data = cpu_to_le32(skb->len);
+		desc->lower.data |= cpu_to_le32(IXGBE_TXD_CMD_EOP |
+		                                IXGBE_TXD_CMD_IFCS |
+		                                IXGBE_TXD_CMD_RS);
+		desc->upper.data = 0;
+	}
+
+	/* Setup Rx Descriptor ring and Rx buffers */
+
+	if (!rx_ring->count)
+		rx_ring->count = IXGBE_DEFAULT_RXD;
+
+	rx_ring->rx_buffer_info = kcalloc(rx_ring->count,
+	                                  sizeof(struct ixgbe_rx_buffer),
+	                                  GFP_KERNEL);
+	if (!(rx_ring->rx_buffer_info)) {
+		ret_val = 4;
+		goto err_nomem;
+	}
+
+	rx_ring->size = rx_ring->count * sizeof(struct ixgbe_legacy_rx_desc);
+	rx_ring->size = ALIGN(rx_ring->size, 4096);
+	if (!(rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
+						   &rx_ring->dma))) {
+		ret_val = 5;
+		goto err_nomem;
+	}
+	rx_ring->next_to_use = rx_ring->next_to_clean = 0;
+
+	rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl & ~IXGBE_RXCTRL_RXEN);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDBAL(0),
+			((u64)rx_ring->dma & 0xFFFFFFFF));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDBAH(0),
+			((u64) rx_ring->dma >> 32));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDLEN(0), rx_ring->size);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDH(0), 0);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDT(0), 0);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
+	reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data &= ~IXGBE_HLREG0_LPBK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_RDRXCTL);
+#define IXGBE_RDRXCTL_RDMTS_MASK    0x00000003 /* Receive Descriptor Minimum
+                                                  Threshold Size mask */
+	reg_data &= ~IXGBE_RDRXCTL_RDMTS_MASK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDRXCTL, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_MCSTCTRL);
+#define IXGBE_MCSTCTRL_MO_MASK      0x00000003 /* Multicast Offset mask */
+	reg_data &= ~IXGBE_MCSTCTRL_MO_MASK;
+	reg_data |= adapter->hw.mac.mc_filter_type;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_MCSTCTRL, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(0));
+	reg_data |= IXGBE_RXDCTL_ENABLE;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(0), reg_data);
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		int j = adapter->rx_ring[0].reg_idx;
+		u32 k;
+		for (k = 0; k < 10; k++) {
+			if (IXGBE_READ_REG(&adapter->hw,
+			                   IXGBE_RXDCTL(j)) & IXGBE_RXDCTL_ENABLE)
+				break;
+			else
+				msleep(1);
+		}
+	}
+
+	rctl |= IXGBE_RXCTRL_RXEN | IXGBE_RXCTRL_DMBYPS;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl);
+
+	for (i = 0; i < rx_ring->count; i++) {
+		struct ixgbe_legacy_rx_desc *rx_desc =
+					IXGBE_RX_DESC(*rx_ring, i);
+		struct sk_buff *skb;
+
+		skb = alloc_skb(IXGBE_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
+		if (!skb) {
+			ret_val = 6;
+			goto err_nomem;
+		}
+		skb_reserve(skb, NET_IP_ALIGN);
+		rx_ring->rx_buffer_info[i].skb = skb;
+		rx_ring->rx_buffer_info[i].dma =
+			pci_map_single(pdev, skb->data, IXGBE_RXBUFFER_2048,
+			               PCI_DMA_FROMDEVICE);
+		rx_desc->buffer_addr =
+				cpu_to_le64(rx_ring->rx_buffer_info[i].dma);
+		memset(skb->data, 0x00, skb->len);
+	}
+
+	return 0;
+
+err_nomem:
+	ixgbe_free_desc_rings(adapter);
+	return ret_val;
+}
+
+static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 reg_data;
+
+	/* right now we only support MAC loopback in the driver */
+
+	/* Setup MAC loopback */
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data |= IXGBE_HLREG0_LPBK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_AUTOC);
+	reg_data &= ~IXGBE_AUTOC_LMS_MASK;
+	reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_AUTOC, reg_data);
+
+	/* Disable Atlas Tx lanes; re-enabled in reset path */
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		u8 atlas;
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_REG_EN;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, atlas);
+
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &atlas);
+		atlas |= IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, atlas);
+	}
+
+	return 0;
+}
+
+static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter)
+{
+	u32 reg_data;
+
+	reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	reg_data &= ~IXGBE_HLREG0_LPBK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+}
+
+static void ixgbe_create_lbtest_frame(struct sk_buff *skb,
+                                      unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size &= ~1;
+	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int ixgbe_check_lbtest_frame(struct sk_buff *skb,
+                                    unsigned int frame_size)
+{
+	frame_size &= ~1;
+	if (*(skb->data + 3) == 0xFF) {
+		if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+		    (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+			return 0;
+		}
+	}
+	return 13;
+}
+
+static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+	struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+	struct pci_dev *pdev = adapter->pdev;
+	int i, j, k, l, lc, good_cnt, ret_val = 0;
+	unsigned long time;
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDT(0), rx_ring->count - 1);
+
+	/*
+	 * Calculate the loop count based on the largest descriptor ring
+	 * The idea is to wrap the largest ring a number of times using 64
+	 * send/receive pairs during each loop
+	 */
+
+	if (rx_ring->count <= tx_ring->count)
+		lc = ((tx_ring->count / 64) * 2) + 1;
+	else
+		lc = ((rx_ring->count / 64) * 2) + 1;
+
+	k = l = 0;
+	for (j = 0; j <= lc; j++) {
+		for (i = 0; i < 64; i++) {
+			ixgbe_create_lbtest_frame(
+					tx_ring->tx_buffer_info[k].skb,
+					1024);
+			pci_dma_sync_single_for_device(pdev,
+				tx_ring->tx_buffer_info[k].dma,
+				tx_ring->tx_buffer_info[k].length,
+				PCI_DMA_TODEVICE);
+			if (unlikely(++k == tx_ring->count))
+				k = 0;
+		}
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(0), k);
+		msleep(200);
+		/* set the start time for the receive */
+		time = jiffies;
+		good_cnt = 0;
+		do {
+			/* receive the sent packets */
+			pci_dma_sync_single_for_cpu(pdev,
+					rx_ring->rx_buffer_info[l].dma,
+					IXGBE_RXBUFFER_2048,
+					PCI_DMA_FROMDEVICE);
+			ret_val = ixgbe_check_lbtest_frame(
+					rx_ring->rx_buffer_info[l].skb, 1024);
+			if (!ret_val)
+				good_cnt++;
+			if (++l == rx_ring->count)
+				l = 0;
+			/*
+			 * time + 20 msecs (200 msecs on 2.4) is more than
+			 * enough time to complete the receives, if it's
+			 * exceeded, break and error off
+			 */
+		} while (good_cnt < 64 && jiffies < (time + 20));
+		if (good_cnt != 64) {
+			/* ret_val is the same as mis-compare */
+			ret_val = 13;
+			break;
+		}
+		if (jiffies >= (time + 20)) {
+			/* Error code for time out error */
+			ret_val = 14;
+			break;
+		}
+	}
+
+	return ret_val;
+}
+
+static int ixgbe_loopback_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+	*data = ixgbe_setup_desc_rings(adapter);
+	if (*data)
+		goto out;
+	*data = ixgbe_setup_loopback_test(adapter);
+	if (*data)
+		goto err_loopback;
+	*data = ixgbe_run_loopback_test(adapter);
+	ixgbe_loopback_cleanup(adapter);
+
+err_loopback:
+	ixgbe_free_desc_rings(adapter);
+out:
+	return *data;
+}
+
+static void ixgbe_diag_test(struct net_device *netdev,
+                            struct ethtool_test *eth_test, u64 *data)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	bool if_running = netif_running(netdev);
+
+	set_bit(__IXGBE_TESTING, &adapter->state);
+	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		/* Offline tests */
+
+		DPRINTK(HW, INFO, "offline testing starting\n");
+
+		/* Link test performed before hardware reset so autoneg doesn't
+		 * interfere with test result */
+		if (ixgbe_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		if (if_running)
+			/* indicate we're in test mode */
+			dev_close(netdev);
+		else
+			ixgbe_reset(adapter);
+
+		DPRINTK(HW, INFO, "register testing starting\n");
+		if (ixgbe_reg_test(adapter, &data[0]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+		DPRINTK(HW, INFO, "eeprom testing starting\n");
+		if (ixgbe_eeprom_test(adapter, &data[1]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+		DPRINTK(HW, INFO, "interrupt testing starting\n");
+		if (ixgbe_intr_test(adapter, &data[2]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+		DPRINTK(HW, INFO, "loopback testing starting\n");
+		if (ixgbe_loopback_test(adapter, &data[3]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		ixgbe_reset(adapter);
+
+		clear_bit(__IXGBE_TESTING, &adapter->state);
+		if (if_running)
+			dev_open(netdev);
+	} else {
+		DPRINTK(HW, INFO, "online testing starting\n");
+		/* Online tests */
+		if (ixgbe_link_test(adapter, &data[4]))
+			eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		/* Online tests aren't run; pass by default */
+		data[0] = 0;
+		data[1] = 0;
+		data[2] = 0;
+		data[3] = 0;
+
+		clear_bit(__IXGBE_TESTING, &adapter->state);
+	}
+	msleep_interruptible(4 * 1000);
+}
 
 static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
                                struct ethtool_wolinfo *wol)
@@ -1106,20 +1980,40 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 	}
 
 	for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
-		struct ixgbe_q_vector *q_vector = &adapter->q_vector[i];
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
 		if (q_vector->txr_count && !q_vector->rxr_count)
 			/* tx vector gets half the rate */
 			q_vector->eitr = (adapter->eitr_param >> 1);
 		else
 			/* rx only or mixed */
 			q_vector->eitr = adapter->eitr_param;
-		ixgbe_write_eitr(adapter, i,
-		                 EITR_INTS_PER_SEC_TO_REG(q_vector->eitr));
+		ixgbe_write_eitr(q_vector);
 	}
 
 	return 0;
 }
 
+static int ixgbe_set_flags(struct net_device *netdev, u32 data)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	ethtool_op_set_flags(netdev, data);
+
+	if (!(adapter->flags & IXGBE_FLAG2_RSC_CAPABLE))
+		return 0;
+
+	/* if state changes we need to update adapter->flags and reset */
+	if ((!!(data & ETH_FLAG_LRO)) != 
+	    (!!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED))) {
+		adapter->flags ^= IXGBE_FLAG2_RSC_ENABLED;
+		if (netif_running(netdev))
+			ixgbe_reinit_locked(adapter);
+		else
+			ixgbe_reset(adapter);
+	}
+	return 0;
+
+}
 
 static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_settings           = ixgbe_get_settings,
@@ -1147,6 +2041,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.set_msglevel           = ixgbe_set_msglevel,
 	.get_tso                = ethtool_op_get_tso,
 	.set_tso                = ixgbe_set_tso,
+	.self_test              = ixgbe_diag_test,
 	.get_strings            = ixgbe_get_strings,
 	.phys_id                = ixgbe_phys_id,
 	.get_sset_count         = ixgbe_get_sset_count,
@@ -1154,7 +2049,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_coalesce           = ixgbe_get_coalesce,
 	.set_coalesce           = ixgbe_set_coalesce,
 	.get_flags              = ethtool_op_get_flags,
-	.set_flags              = ethtool_op_set_flags,
+	.set_flags              = ixgbe_set_flags,
 };
 
 void ixgbe_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
new file mode 100644
index 00000000000..3c3bf1f07b8
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -0,0 +1,556 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+#include "ixgbe.h"
+#include <linux/if_ether.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+#include <scsi/libfcoe.h>
+
+/**
+ * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
+ * @rx_desc: advanced rx descriptor
+ *
+ * Returns : true if it is FCoE pkt
+ */
+static inline bool ixgbe_rx_is_fcoe(union ixgbe_adv_rx_desc *rx_desc)
+{
+	u16 p;
+
+	p = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info);
+	if (p & IXGBE_RXDADV_PKTTYPE_ETQF) {
+		p &= IXGBE_RXDADV_PKTTYPE_ETQF_MASK;
+		p >>= IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT;
+		return p == IXGBE_ETQF_FILTER_FCOE;
+	}
+	return false;
+}
+
+/**
+ * ixgbe_fcoe_clear_ddp - clear the given ddp context
+ * @ddp - ptr to the ixgbe_fcoe_ddp
+ *
+ * Returns : none
+ *
+ */
+static inline void ixgbe_fcoe_clear_ddp(struct ixgbe_fcoe_ddp *ddp)
+{
+	ddp->len = 0;
+	ddp->err = 0;
+	ddp->udl = NULL;
+	ddp->udp = 0UL;
+	ddp->sgl = NULL;
+	ddp->sgc = 0;
+}
+
+/**
+ * ixgbe_fcoe_ddp_put - free the ddp context for a given xid
+ * @netdev: the corresponding net_device
+ * @xid: the xid that corresponding ddp will be freed
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_done
+ * and it is expected to be called by ULD, i.e., FCP layer of libfc
+ * to release the corresponding ddp context when the I/O is done.
+ *
+ * Returns : data length already ddp-ed in bytes
+ */
+int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
+{
+	int len = 0;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_adapter *adapter;
+	struct ixgbe_fcoe_ddp *ddp;
+
+	if (!netdev)
+		goto out_ddp_put;
+
+	if (xid >= IXGBE_FCOE_DDP_MAX)
+		goto out_ddp_put;
+
+	adapter = netdev_priv(netdev);
+	fcoe = &adapter->fcoe;
+	ddp = &fcoe->ddp[xid];
+	if (!ddp->udl)
+		goto out_ddp_put;
+
+	len = ddp->len;
+	/* if there an error, force to invalidate ddp context */
+	if (ddp->err) {
+		spin_lock_bh(&fcoe->lock);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLT, 0);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLTRW,
+				(xid | IXGBE_FCFLTRW_WE));
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCBUFF, 0);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW,
+				(xid | IXGBE_FCDMARW_WE));
+		spin_unlock_bh(&fcoe->lock);
+	}
+	if (ddp->sgl)
+		pci_unmap_sg(adapter->pdev, ddp->sgl, ddp->sgc,
+			     DMA_FROM_DEVICE);
+	pci_pool_free(fcoe->pool, ddp->udl, ddp->udp);
+	ixgbe_fcoe_clear_ddp(ddp);
+
+out_ddp_put:
+	return len;
+}
+
+/**
+ * ixgbe_fcoe_ddp_get - called to set up ddp context
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup
+ * and is expected to be called from ULD, e.g., FCP layer of libfc
+ * to set up ddp for the corresponding xid of the given sglist for
+ * the corresponding I/O.
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+		       struct scatterlist *sgl, unsigned int sgc)
+{
+	struct ixgbe_adapter *adapter;
+	struct ixgbe_hw *hw;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_fcoe_ddp *ddp;
+	struct scatterlist *sg;
+	unsigned int i, j, dmacount;
+	unsigned int len;
+	static const unsigned int bufflen = 4096;
+	unsigned int firstoff = 0;
+	unsigned int lastsize;
+	unsigned int thisoff = 0;
+	unsigned int thislen = 0;
+	u32 fcbuff, fcdmarw, fcfltrw;
+	dma_addr_t addr;
+
+	if (!netdev || !sgl)
+		return 0;
+
+	adapter = netdev_priv(netdev);
+	if (xid >= IXGBE_FCOE_DDP_MAX) {
+		DPRINTK(DRV, WARNING, "xid=0x%x out-of-range\n", xid);
+		return 0;
+	}
+
+	fcoe = &adapter->fcoe;
+	if (!fcoe->pool) {
+		DPRINTK(DRV, WARNING, "xid=0x%x no ddp pool for fcoe\n", xid);
+		return 0;
+	}
+
+	ddp = &fcoe->ddp[xid];
+	if (ddp->sgl) {
+		DPRINTK(DRV, ERR, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
+			xid, ddp->sgl, ddp->sgc);
+		return 0;
+	}
+	ixgbe_fcoe_clear_ddp(ddp);
+
+	/* setup dma from scsi command sgl */
+	dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
+	if (dmacount == 0) {
+		DPRINTK(DRV, ERR, "xid 0x%x DMA map error\n", xid);
+		return 0;
+	}
+
+	/* alloc the udl from our ddp pool */
+	ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp);
+	if (!ddp->udl) {
+		DPRINTK(DRV, ERR, "failed allocated ddp context\n");
+		goto out_noddp_unmap;
+	}
+	ddp->sgl = sgl;
+	ddp->sgc = sgc;
+
+	j = 0;
+	for_each_sg(sgl, sg, dmacount, i) {
+		addr = sg_dma_address(sg);
+		len = sg_dma_len(sg);
+		while (len) {
+			/* get the offset of length of current buffer */
+			thisoff = addr & ((dma_addr_t)bufflen - 1);
+			thislen = min((bufflen - thisoff), len);
+			/*
+			 * all but the 1st buffer (j == 0)
+			 * must be aligned on bufflen
+			 */
+			if ((j != 0) && (thisoff))
+				goto out_noddp_free;
+			/*
+			 * all but the last buffer
+			 * ((i == (dmacount - 1)) && (thislen == len))
+			 * must end at bufflen
+			 */
+			if (((i != (dmacount - 1)) || (thislen != len))
+			    && ((thislen + thisoff) != bufflen))
+				goto out_noddp_free;
+
+			ddp->udl[j] = (u64)(addr - thisoff);
+			/* only the first buffer may have none-zero offset */
+			if (j == 0)
+				firstoff = thisoff;
+			len -= thislen;
+			addr += thislen;
+			j++;
+			/* max number of buffers allowed in one DDP context */
+			if (j > IXGBE_BUFFCNT_MAX) {
+				DPRINTK(DRV, ERR, "xid=%x:%d,%d,%d:addr=%llx "
+					"not enough descriptors\n",
+					xid, i, j, dmacount, (u64)addr);
+				goto out_noddp_free;
+			}
+		}
+	}
+	/* only the last buffer may have non-full bufflen */
+	lastsize = thisoff + thislen;
+
+	fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
+	fcbuff |= (j << IXGBE_FCBUFF_BUFFCNT_SHIFT);
+	fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
+	fcbuff |= (IXGBE_FCBUFF_VALID);
+
+	fcdmarw = xid;
+	fcdmarw |= IXGBE_FCDMARW_WE;
+	fcdmarw |= (lastsize << IXGBE_FCDMARW_LASTSIZE_SHIFT);
+
+	fcfltrw = xid;
+	fcfltrw |= IXGBE_FCFLTRW_WE;
+
+	/* program DMA context */
+	hw = &adapter->hw;
+	spin_lock_bh(&fcoe->lock);
+	IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_32BIT_MASK);
+	IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32);
+	IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff);
+	IXGBE_WRITE_REG(hw, IXGBE_FCDMARW, fcdmarw);
+	/* program filter context */
+	IXGBE_WRITE_REG(hw, IXGBE_FCPARAM, 0);
+	IXGBE_WRITE_REG(hw, IXGBE_FCFLT, IXGBE_FCFLT_VALID);
+	IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW, fcfltrw);
+	spin_unlock_bh(&fcoe->lock);
+
+	return 1;
+
+out_noddp_free:
+	pci_pool_free(fcoe->pool, ddp->udl, ddp->udp);
+	ixgbe_fcoe_clear_ddp(ddp);
+
+out_noddp_unmap:
+	pci_unmap_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
+	return 0;
+}
+
+/**
+ * ixgbe_fcoe_ddp - check ddp status and mark it done
+ * @adapter: ixgbe adapter
+ * @rx_desc: advanced rx descriptor
+ * @skb: the skb holding the received data
+ *
+ * This checks ddp status.
+ *
+ * Returns : < 0 indicates an error or not a FCiE ddp, 0 indicates
+ * not passing the skb to ULD, > 0 indicates is the length of data
+ * being ddped.
+ */
+int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
+		   union ixgbe_adv_rx_desc *rx_desc,
+		   struct sk_buff *skb)
+{
+	u16 xid;
+	u32 sterr, fceofe, fcerr, fcstat;
+	int rc = -EINVAL;
+	struct ixgbe_fcoe *fcoe;
+	struct ixgbe_fcoe_ddp *ddp;
+	struct fc_frame_header *fh;
+
+	if (!ixgbe_rx_is_fcoe(rx_desc))
+		goto ddp_out;
+
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	sterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	fcerr = (sterr & IXGBE_RXDADV_ERR_FCERR);
+	fceofe = (sterr & IXGBE_RXDADV_ERR_FCEOFE);
+	if (fcerr == IXGBE_FCERR_BADCRC)
+		skb->ip_summed = CHECKSUM_NONE;
+
+	skb_reset_network_header(skb);
+	skb_set_transport_header(skb, skb_network_offset(skb) +
+				 sizeof(struct fcoe_hdr));
+	fh = (struct fc_frame_header *)skb_transport_header(skb);
+	xid =  be16_to_cpu(fh->fh_ox_id);
+	if (xid >= IXGBE_FCOE_DDP_MAX)
+		goto ddp_out;
+
+	fcoe = &adapter->fcoe;
+	ddp = &fcoe->ddp[xid];
+	if (!ddp->udl)
+		goto ddp_out;
+
+	ddp->err = (fcerr | fceofe);
+	if (ddp->err)
+		goto ddp_out;
+
+	fcstat = (sterr & IXGBE_RXDADV_STAT_FCSTAT);
+	if (fcstat) {
+		/* update length of DDPed data */
+		ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+		/* unmap the sg list when FCP_RSP is received */
+		if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) {
+			pci_unmap_sg(adapter->pdev, ddp->sgl,
+				     ddp->sgc, DMA_FROM_DEVICE);
+			ddp->sgl = NULL;
+			ddp->sgc = 0;
+		}
+		/* return 0 to bypass going to ULD for DDPed data */
+		if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP)
+			rc = 0;
+		else
+			rc = ddp->len;
+	}
+
+ddp_out:
+	return rc;
+}
+
+/**
+ * ixgbe_fso - ixgbe FCoE Sequence Offload (FSO)
+ * @adapter: ixgbe adapter
+ * @tx_ring: tx desc ring
+ * @skb: associated skb
+ * @tx_flags: tx flags
+ * @hdr_len: hdr_len to be returned
+ *
+ * This sets up large send offload for FCoE
+ *
+ * Returns : 0 indicates no FSO, > 0 for FSO, < 0 for error
+ */
+int ixgbe_fso(struct ixgbe_adapter *adapter,
+              struct ixgbe_ring *tx_ring, struct sk_buff *skb,
+              u32 tx_flags, u8 *hdr_len)
+{
+	u8 sof, eof;
+	u32 vlan_macip_lens;
+	u32 fcoe_sof_eof;
+	u32 type_tucmd;
+	u32 mss_l4len_idx;
+	int mss = 0;
+	unsigned int i;
+	struct ixgbe_tx_buffer *tx_buffer_info;
+	struct ixgbe_adv_tx_context_desc *context_desc;
+	struct fc_frame_header *fh;
+
+	if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
+		DPRINTK(DRV, ERR, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
+			skb_shinfo(skb)->gso_type);
+		return -EINVAL;
+	}
+
+	/* resets the header to point fcoe/fc */
+	skb_set_network_header(skb, skb->mac_len);
+	skb_set_transport_header(skb, skb->mac_len +
+				 sizeof(struct fcoe_hdr));
+
+	/* sets up SOF and ORIS */
+	fcoe_sof_eof = 0;
+	sof = ((struct fcoe_hdr *)skb_network_header(skb))->fcoe_sof;
+	switch (sof) {
+	case FC_SOF_I2:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIS;
+		break;
+	case FC_SOF_I3:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIS;
+		break;
+	case FC_SOF_N2:
+		break;
+	case FC_SOF_N3:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
+		break;
+	default:
+		DPRINTK(DRV, WARNING, "unknown sof = 0x%x\n", sof);
+		return -EINVAL;
+	}
+
+	/* the first byte of the last dword is EOF */
+	skb_copy_bits(skb, skb->len - 4, &eof, 1);
+	/* sets up EOF and ORIE */
+	switch (eof) {
+	case FC_EOF_N:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N;
+		break;
+	case FC_EOF_T:
+		/* lso needs ORIE */
+		if (skb_is_gso(skb)) {
+			fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N;
+			fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_ORIE;
+		} else {
+			fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_T;
+		}
+		break;
+	case FC_EOF_NI:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_NI;
+		break;
+	case FC_EOF_A:
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
+		break;
+	default:
+		DPRINTK(DRV, WARNING, "unknown eof = 0x%x\n", eof);
+		return -EINVAL;
+	}
+
+	/* sets up PARINC indicating data offset */
+	fh = (struct fc_frame_header *)skb_transport_header(skb);
+	if (fh->fh_f_ctl[2] & FC_FC_REL_OFF)
+		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_PARINC;
+
+	/* hdr_len includes fc_hdr if FCoE lso is enabled */
+	*hdr_len = sizeof(struct fcoe_crc_eof);
+	if (skb_is_gso(skb))
+		*hdr_len += (skb_transport_offset(skb) +
+			     sizeof(struct fc_frame_header));
+	/* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
+	vlan_macip_lens = (skb_transport_offset(skb) +
+			  sizeof(struct fc_frame_header));
+	vlan_macip_lens |= ((skb_transport_offset(skb) - 4)
+			   << IXGBE_ADVTXD_MACLEN_SHIFT);
+	vlan_macip_lens |= (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK);
+
+	/* type_tycmd and mss: set TUCMD.FCoE to enable offload */
+	type_tucmd = IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT |
+		     IXGBE_ADVTXT_TUCMD_FCOE;
+	if (skb_is_gso(skb))
+		mss = skb_shinfo(skb)->gso_size;
+	/* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */
+	mss_l4len_idx = (mss << IXGBE_ADVTXD_MSS_SHIFT) |
+			(1 << IXGBE_ADVTXD_IDX_SHIFT);
+
+	/* write context desc */
+	i = tx_ring->next_to_use;
+	context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
+	context_desc->vlan_macip_lens	= cpu_to_le32(vlan_macip_lens);
+	context_desc->seqnum_seed	= cpu_to_le32(fcoe_sof_eof);
+	context_desc->type_tucmd_mlhl	= cpu_to_le32(type_tucmd);
+	context_desc->mss_l4len_idx	= cpu_to_le32(mss_l4len_idx);
+
+	tx_buffer_info = &tx_ring->tx_buffer_info[i];
+	tx_buffer_info->time_stamp = jiffies;
+	tx_buffer_info->next_to_watch = i;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+	tx_ring->next_to_use = i;
+
+	return skb_is_gso(skb);
+}
+
+/**
+ * ixgbe_configure_fcoe - configures registers for fcoe at start
+ * @adapter: ptr to ixgbe adapter
+ *
+ * This sets up FCoE related registers
+ *
+ * Returns : none
+ */
+void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
+{
+	int i, fcoe_q, fcoe_i;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+	/* create the pool for ddp if not created yet */
+	if (!fcoe->pool) {
+		/* allocate ddp pool */
+		fcoe->pool = pci_pool_create("ixgbe_fcoe_ddp",
+					     adapter->pdev, IXGBE_FCPTR_MAX,
+					     IXGBE_FCPTR_ALIGN, PAGE_SIZE);
+		if (!fcoe->pool)
+			DPRINTK(DRV, ERR,
+				"failed to allocated FCoE DDP pool\n");
+
+		spin_lock_init(&fcoe->lock);
+	}
+
+	/* Enable L2 eth type filter for FCoE */
+	IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE),
+			(ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN));
+	if (adapter->ring_feature[RING_F_FCOE].indices) {
+		/* Use multiple rx queues for FCoE by redirection table */
+		for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
+			fcoe_i = f->mask + i % f->indices;
+			fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
+			fcoe_q = adapter->rx_ring[fcoe_i].reg_idx;
+			IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
+		}
+		IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
+		IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
+	} else  {
+		/* Use single rx queue for FCoE */
+		fcoe_i = f->mask;
+		fcoe_q = adapter->rx_ring[fcoe_i].reg_idx;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0);
+		IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE),
+				IXGBE_ETQS_QUEUE_EN |
+				(fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
+			IXGBE_FCRXCTRL_FCOELLI |
+			IXGBE_FCRXCTRL_FCCRCBO |
+			(FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
+}
+
+/**
+ * ixgbe_cleanup_fcoe - release all fcoe ddp context resources
+ * @adapter : ixgbe adapter
+ *
+ * Cleans up outstanding ddp context resources
+ *
+ * Returns : none
+ */
+void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter)
+{
+	int i;
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
+	/* release ddp resource */
+	if (fcoe->pool) {
+		for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++)
+			ixgbe_fcoe_ddp_put(adapter->netdev, i);
+		pci_pool_destroy(fcoe->pool);
+		fcoe->pool = NULL;
+	}
+}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
new file mode 100644
index 00000000000..c5b50026a89
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -0,0 +1,67 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2009 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_FCOE_H
+#define _IXGBE_FCOE_H
+
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcoe.h>
+
+/* shift bits within STAT fo FCSTAT */
+#define IXGBE_RXDADV_FCSTAT_SHIFT	4
+
+/* ddp user buffer */
+#define IXGBE_BUFFCNT_MAX	256	/* 8 bits bufcnt */
+#define IXGBE_FCPTR_ALIGN	16
+#define IXGBE_FCPTR_MAX	(IXGBE_BUFFCNT_MAX * sizeof(dma_addr_t))
+#define IXGBE_FCBUFF_4KB	0x0
+#define IXGBE_FCBUFF_8KB	0x1
+#define IXGBE_FCBUFF_16KB	0x2
+#define IXGBE_FCBUFF_64KB	0x3
+#define IXGBE_FCBUFF_MAX	65536	/* 64KB max */
+#define IXGBE_FCBUFF_MIN	4096	/* 4KB min */
+#define IXGBE_FCOE_DDP_MAX	512	/* 9 bits xid */
+
+/* fcerr */
+#define IXGBE_FCERR_BADCRC       0x00100000
+
+struct ixgbe_fcoe_ddp {
+	int len;
+	u32 err;
+	unsigned int sgc;
+	struct scatterlist *sgl;
+	dma_addr_t udp;
+	u64 *udl;
+};
+
+struct ixgbe_fcoe {
+	spinlock_t lock;
+	struct pci_pool *pool;
+	struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
+};
+
+#endif /* _IXGBE_FCOE_H */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 07e778d3e5d..a551a96ce67 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -39,6 +39,7 @@
 #include <net/ip6_checksum.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
+#include <scsi/fc/fc_fcoe.h>
 
 #include "ixgbe.h"
 #include "ixgbe_common.h"
@@ -47,7 +48,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
                               "Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "2.0.8-k2"
+#define DRV_VERSION "2.0.34-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
 
@@ -89,6 +90,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82598 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM),
+	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
 	 board_82599 },
 
@@ -183,6 +186,22 @@ static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction,
 	}
 }
 
+static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter,
+                                          u64 qmask)
+{
+	u32 mask;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+	} else {
+		mask = (qmask & 0xFFFFFFFF);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
+		mask = (qmask >> 32);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
+	}
+}
+
 static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
                                              struct ixgbe_tx_buffer
                                              *tx_buffer_info)
@@ -245,14 +264,13 @@ static void ixgbe_tx_timeout(struct net_device *netdev);
 
 /**
  * ixgbe_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
+ * @q_vector: structure containing interrupt and ring information
  * @tx_ring: tx ring to clean
- *
- * returns true if transmit work is done
  **/
-static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
+static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
                                struct ixgbe_ring *tx_ring)
 {
+	struct ixgbe_adapter *adapter = q_vector->adapter;
 	struct net_device *netdev = adapter->netdev;
 	union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
 	struct ixgbe_tx_buffer *tx_buffer_info;
@@ -275,12 +293,24 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
 
 			if (cleaned && skb) {
 				unsigned int segs, bytecount;
+				unsigned int hlen = skb_headlen(skb);
 
 				/* gso_segs is currently only valid for tcp */
 				segs = skb_shinfo(skb)->gso_segs ?: 1;
+#ifdef IXGBE_FCOE
+				/* adjust for FCoE Sequence Offload */
+				if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+				    && (skb->protocol == htons(ETH_P_FCOE)) &&
+				    skb_is_gso(skb)) {
+					hlen = skb_transport_offset(skb) +
+						sizeof(struct fc_frame_header) +
+						sizeof(struct fcoe_crc_eof);
+					segs = DIV_ROUND_UP(skb->len - hlen,
+						skb_shinfo(skb)->gso_size);
+				}
+#endif /* IXGBE_FCOE */
 				/* multiply data chunks by size of headers */
-				bytecount = ((segs - 1) * skb_headlen(skb)) +
-				            skb->len;
+				bytecount = ((segs - 1) * hlen) + skb->len;
 				total_packets += segs;
 				total_bytes += bytecount;
 			}
@@ -327,7 +357,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter,
 
 	/* re-arm the interrupt */
 	if (count >= tx_ring->work_limit)
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->v_idx);
+		ixgbe_irq_rearm_queues(adapter, ((u64)1 << q_vector->v_idx));
 
 	tx_ring->total_bytes += total_bytes;
 	tx_ring->total_packets += total_packets;
@@ -398,6 +428,9 @@ static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
 	if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
 		return;
 
+	/* always use CB2 mode, difference is masked in the CB driver */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
+
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		adapter->tx_ring[i].cpu = -1;
 		ixgbe_update_tx_dca(adapter, &adapter->tx_ring[i]);
@@ -419,9 +452,6 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
 		/* if we're already enabled, don't do it again */
 		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
 			break;
-		/* Always use CB2 mode, difference is masked
-		 * in the CB driver. */
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
 		if (dca_add_requester(dev) == 0) {
 			adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
 			ixgbe_setup_dca(adapter);
@@ -451,6 +481,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
  **/
 static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
                               struct sk_buff *skb, u8 status,
+                              struct ixgbe_ring *ring,
                               union ixgbe_adv_rx_desc *rx_desc)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
@@ -458,24 +489,17 @@ static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
 	bool is_vlan = (status & IXGBE_RXD_STAT_VP);
 	u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
 
-	skb_record_rx_queue(skb, q_vector - &adapter->q_vector[0]);
-	if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
+	skb_record_rx_queue(skb, ring->queue_index);
+	if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
 		if (adapter->vlgrp && is_vlan && (tag != 0))
 			vlan_gro_receive(napi, adapter->vlgrp, tag, skb);
 		else
 			napi_gro_receive(napi, skb);
 	} else {
-		if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) {
-			if (adapter->vlgrp && is_vlan && (tag != 0))
-				vlan_hwaccel_receive_skb(skb, adapter->vlgrp, tag);
-			else
-				netif_receive_skb(skb);
-		} else {
-			if (adapter->vlgrp && is_vlan && (tag != 0))
-				vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
-			else
-				netif_rx(skb);
-		}
+		if (adapter->vlgrp && is_vlan && (tag != 0))
+			vlan_hwaccel_rx(skb, adapter->vlgrp, tag);
+		else
+			netif_rx(skb);
 	}
 }
 
@@ -622,6 +646,40 @@ static inline u16 ixgbe_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc)
 	return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
 }
 
+static inline u32 ixgbe_get_rsc_count(union ixgbe_adv_rx_desc *rx_desc)
+{
+	return (le32_to_cpu(rx_desc->wb.lower.lo_dword.data) &
+	        IXGBE_RXDADV_RSCCNT_MASK) >>
+	        IXGBE_RXDADV_RSCCNT_SHIFT;
+}
+
+/**
+ * ixgbe_transform_rsc_queue - change rsc queue into a full packet
+ * @skb: pointer to the last skb in the rsc queue
+ *
+ * This function changes a queue full of hw rsc buffers into a completed
+ * packet.  It uses the ->prev pointers to find the first packet and then
+ * turns it into the frag list owner.
+ **/
+static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb)
+{
+	unsigned int frag_list_size = 0;
+
+	while (skb->prev) {
+		struct sk_buff *prev = skb->prev;
+		frag_list_size += skb->len;
+		skb->prev = NULL;
+		skb = prev;
+	}
+
+	skb_shinfo(skb)->frag_list = skb->next;
+	skb->next = NULL;
+	skb->len += frag_list_size;
+	skb->data_len += frag_list_size;
+	skb->truesize += frag_list_size;
+	return skb;
+}
+
 static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
                                struct ixgbe_ring *rx_ring,
                                int *work_done, int work_to_do)
@@ -631,12 +689,15 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 	union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
 	struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer;
 	struct sk_buff *skb;
-	unsigned int i;
+	unsigned int i, rsc_count = 0;
 	u32 len, staterr;
 	u16 hdr_info;
 	bool cleaned = false;
 	int cleaned_count = 0;
 	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+#ifdef IXGBE_FCOE
+	int ddp_bytes = 0;
+#endif /* IXGBE_FCOE */
 
 	i = rx_ring->next_to_clean;
 	rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
@@ -667,7 +728,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		prefetch(skb->data - NET_IP_ALIGN);
 		rx_buffer_info->skb = NULL;
 
-		if (len && !skb_shinfo(skb)->nr_frags) {
+		if (rx_buffer_info->dma) {
 			pci_unmap_single(pdev, rx_buffer_info->dma,
 			                 rx_ring->rx_buf_len,
 			                 PCI_DMA_FROMDEVICE);
@@ -697,20 +758,38 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		i++;
 		if (i == rx_ring->count)
 			i = 0;
-		next_buffer = &rx_ring->rx_buffer_info[i];
 
 		next_rxd = IXGBE_RX_DESC_ADV(*rx_ring, i);
 		prefetch(next_rxd);
-
 		cleaned_count++;
+
+		if (adapter->flags & IXGBE_FLAG2_RSC_CAPABLE)
+			rsc_count = ixgbe_get_rsc_count(rx_desc);
+
+		if (rsc_count) {
+			u32 nextp = (staterr & IXGBE_RXDADV_NEXTP_MASK) >>
+				     IXGBE_RXDADV_NEXTP_SHIFT;
+			next_buffer = &rx_ring->rx_buffer_info[nextp];
+			rx_ring->rsc_count += (rsc_count - 1);
+		} else {
+			next_buffer = &rx_ring->rx_buffer_info[i];
+		}
+
 		if (staterr & IXGBE_RXD_STAT_EOP) {
+			if (skb->prev)
+				skb = ixgbe_transform_rsc_queue(skb);
 			rx_ring->stats.packets++;
 			rx_ring->stats.bytes += skb->len;
 		} else {
-			rx_buffer_info->skb = next_buffer->skb;
-			rx_buffer_info->dma = next_buffer->dma;
-			next_buffer->skb = skb;
-			next_buffer->dma = 0;
+			if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+				rx_buffer_info->skb = next_buffer->skb;
+				rx_buffer_info->dma = next_buffer->dma;
+				next_buffer->skb = skb;
+				next_buffer->dma = 0;
+			} else {
+				skb->next = next_buffer->skb;
+				skb->next->prev = skb;
+			}
 			adapter->non_eop_descs++;
 			goto next_desc;
 		}
@@ -727,7 +806,15 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		total_rx_packets++;
 
 		skb->protocol = eth_type_trans(skb, adapter->netdev);
-		ixgbe_receive_skb(q_vector, skb, staterr, rx_desc);
+#ifdef IXGBE_FCOE
+		/* if ddp, not passing to ULD unless for FCP_RSP or error */
+		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+			ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
+			if (!ddp_bytes)
+				goto next_desc;
+		}
+#endif /* IXGBE_FCOE */
+		ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
 
 next_desc:
 		rx_desc->wb.upper.status_error = 0;
@@ -740,7 +827,7 @@ next_desc:
 
 		/* use prefetched values */
 		rx_desc = next_rxd;
-		rx_buffer_info = next_buffer;
+		rx_buffer_info = &rx_ring->rx_buffer_info[i];
 
 		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 	}
@@ -751,6 +838,21 @@ next_desc:
 	if (cleaned_count)
 		ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
 
+#ifdef IXGBE_FCOE
+	/* include DDPed FCoE data */
+	if (ddp_bytes > 0) {
+		unsigned int mss;
+
+		mss = adapter->netdev->mtu - sizeof(struct fcoe_hdr) -
+			sizeof(struct fc_frame_header) -
+			sizeof(struct fcoe_crc_eof);
+		if (mss > 512)
+			mss &= ~511;
+		total_rx_bytes += ddp_bytes;
+		total_rx_packets += DIV_ROUND_UP(ddp_bytes, mss);
+	}
+#endif /* IXGBE_FCOE */
+
 	rx_ring->total_packets += total_rx_packets;
 	rx_ring->total_bytes += total_rx_bytes;
 	adapter->net_stats.rx_bytes += total_rx_bytes;
@@ -780,7 +882,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 	 * corresponding register.
 	 */
 	for (v_idx = 0; v_idx < q_vectors; v_idx++) {
-		q_vector = &adapter->q_vector[v_idx];
+		q_vector = adapter->q_vector[v_idx];
 		/* XXX for_each_bit(...) */
 		r_idx = find_first_bit(q_vector->rxr_idx,
 		                       adapter->num_rx_queues);
@@ -810,12 +912,7 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 			/* rx only */
 			q_vector->eitr = adapter->eitr_param;
 
-		/*
-		 * since this is initial set up don't need to call
-		 * ixgbe_write_eitr helper
-		 */
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx),
-		                EITR_INTS_PER_SEC_TO_REG(q_vector->eitr));
+		ixgbe_write_eitr(q_vector);
 	}
 
 	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
@@ -900,17 +997,19 @@ update_itr_done:
 
 /**
  * ixgbe_write_eitr - write EITR register in hardware specific way
- * @adapter: pointer to adapter struct
- * @v_idx: vector index into q_vector array
- * @itr_reg: new value to be written in *register* format, not ints/s
+ * @q_vector: structure containing interrupt and ring information
  *
  * This function is made to be called by ethtool and by the driver
  * when it needs to update EITR registers at runtime.  Hardware
  * specific quirks/differences are taken care of here.
  */
-void ixgbe_write_eitr(struct ixgbe_adapter *adapter, int v_idx, u32 itr_reg)
+void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
 {
+	struct ixgbe_adapter *adapter = q_vector->adapter;
 	struct ixgbe_hw *hw = &adapter->hw;
+	int v_idx = q_vector->v_idx;
+	u32 itr_reg = EITR_INTS_PER_SEC_TO_REG(q_vector->eitr);
+
 	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
 		/* must write high and low 16 bits to reset counter */
 		itr_reg |= (itr_reg << 16);
@@ -929,8 +1028,7 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 	struct ixgbe_adapter *adapter = q_vector->adapter;
 	u32 new_itr;
 	u8 current_itr, ret_itr;
-	int i, r_idx, v_idx = ((void *)q_vector - (void *)(adapter->q_vector)) /
-	                       sizeof(struct ixgbe_q_vector);
+	int i, r_idx;
 	struct ixgbe_ring *rx_ring, *tx_ring;
 
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
@@ -980,14 +1078,13 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 	}
 
 	if (new_itr != q_vector->eitr) {
-		u32 itr_reg;
+		/* do an exponential smoothing */
+		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
 
 		/* save the algorithm value here, not the smoothed one */
 		q_vector->eitr = new_itr;
-		/* do an exponential smoothing */
-		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
-		itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
-		ixgbe_write_eitr(adapter, v_idx, itr_reg);
+
+		ixgbe_write_eitr(q_vector);
 	}
 
 	return;
@@ -1058,14 +1155,64 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 	if (hw->mac.type == ixgbe_mac_82598EB)
 		ixgbe_check_fan_failure(adapter, eicr);
 
-	if (hw->mac.type == ixgbe_mac_82599EB)
+	if (hw->mac.type == ixgbe_mac_82599EB) {
 		ixgbe_check_sfp_event(adapter, eicr);
+
+		/* Handle Flow Director Full threshold interrupt */
+		if (eicr & IXGBE_EICR_FLOW_DIR) {
+			int i;
+			IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_FLOW_DIR);
+			/* Disable transmits before FDIR Re-initialization */
+			netif_tx_stop_all_queues(netdev);
+			for (i = 0; i < adapter->num_tx_queues; i++) {
+				struct ixgbe_ring *tx_ring =
+				                           &adapter->tx_ring[i];
+				if (test_and_clear_bit(__IXGBE_FDIR_INIT_DONE,
+				                       &tx_ring->reinit_state))
+					schedule_work(&adapter->fdir_reinit_task);
+			}
+		}
+	}
 	if (!test_bit(__IXGBE_DOWN, &adapter->state))
 		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
 
 	return IRQ_HANDLED;
 }
 
+static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter,
+					   u64 qmask)
+{
+	u32 mask;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+	} else {
+		mask = (qmask & 0xFFFFFFFF);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(0), mask);
+		mask = (qmask >> 32);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1), mask);
+	}
+	/* skip the flush */
+}
+
+static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
+                                            u64 qmask)
+{
+	u32 mask;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, mask);
+	} else {
+		mask = (qmask & 0xFFFFFFFF);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), mask);
+		mask = (qmask >> 32);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), mask);
+	}
+	/* skip the flush */
+}
+
 static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
 {
 	struct ixgbe_q_vector *q_vector = data;
@@ -1079,17 +1226,16 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
 	for (i = 0; i < q_vector->txr_count; i++) {
 		tx_ring = &(adapter->tx_ring[r_idx]);
-#ifdef CONFIG_IXGBE_DCA
-		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-			ixgbe_update_tx_dca(adapter, tx_ring);
-#endif
 		tx_ring->total_bytes = 0;
 		tx_ring->total_packets = 0;
-		ixgbe_clean_tx_irq(adapter, tx_ring);
 		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
 		                      r_idx + 1);
 	}
 
+	/* disable interrupts on this vector only */
+	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	napi_schedule(&q_vector->napi);
+
 	return IRQ_HANDLED;
 }
 
@@ -1121,7 +1267,7 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	rx_ring = &(adapter->rx_ring[r_idx]);
 	/* disable interrupts on this vector only */
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rx_ring->v_idx);
+	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
 	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
@@ -1129,8 +1275,36 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 
 static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
 {
-	ixgbe_msix_clean_rx(irq, data);
-	ixgbe_msix_clean_tx(irq, data);
+	struct ixgbe_q_vector *q_vector = data;
+	struct ixgbe_adapter  *adapter = q_vector->adapter;
+	struct ixgbe_ring  *ring;
+	int r_idx;
+	int i;
+
+	if (!q_vector->txr_count && !q_vector->rxr_count)
+		return IRQ_HANDLED;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	for (i = 0; i < q_vector->txr_count; i++) {
+		ring = &(adapter->tx_ring[r_idx]);
+		ring->total_bytes = 0;
+		ring->total_packets = 0;
+		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+		                      r_idx + 1);
+	}
+
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	for (i = 0; i < q_vector->rxr_count; i++) {
+		ring = &(adapter->rx_ring[r_idx]);
+		ring->total_bytes = 0;
+		ring->total_packets = 0;
+		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+		                      r_idx + 1);
+	}
+
+	/* disable interrupts on this vector only */
+	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
 }
@@ -1167,29 +1341,42 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
 		if (adapter->itr_setting & 1)
 			ixgbe_set_itr_msix(q_vector);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rx_ring->v_idx);
+			ixgbe_irq_enable_queues(adapter,
+			                        ((u64)1 << q_vector->v_idx));
 	}
 
 	return work_done;
 }
 
 /**
- * ixgbe_clean_rxonly_many - msix (aka one shot) rx clean routine
+ * ixgbe_clean_rxtx_many - msix (aka one shot) rx clean routine
  * @napi: napi struct with our devices info in it
  * @budget: amount of work driver is allowed to do this pass, in packets
  *
  * This function will clean more than one rx queue associated with a
  * q_vector.
  **/
-static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget)
+static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 {
 	struct ixgbe_q_vector *q_vector =
 	                       container_of(napi, struct ixgbe_q_vector, napi);
 	struct ixgbe_adapter *adapter = q_vector->adapter;
-	struct ixgbe_ring *rx_ring = NULL;
+	struct ixgbe_ring *ring = NULL;
 	int work_done = 0, i;
 	long r_idx;
-	u16 enable_mask = 0;
+	bool tx_clean_complete = true;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	for (i = 0; i < q_vector->txr_count; i++) {
+		ring = &(adapter->tx_ring[r_idx]);
+#ifdef CONFIG_IXGBE_DCA
+		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+			ixgbe_update_tx_dca(adapter, ring);
+#endif
+		tx_clean_complete &= ixgbe_clean_tx_irq(q_vector, ring);
+		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+		                      r_idx + 1);
+	}
 
 	/* attempt to distribute budget to each queue fairly, but don't allow
 	 * the budget to go below 1 because we'll exit polling */
@@ -1197,47 +1384,87 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget)
 	budget = max(budget, 1);
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	for (i = 0; i < q_vector->rxr_count; i++) {
-		rx_ring = &(adapter->rx_ring[r_idx]);
+		ring = &(adapter->rx_ring[r_idx]);
 #ifdef CONFIG_IXGBE_DCA
 		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-			ixgbe_update_rx_dca(adapter, rx_ring);
+			ixgbe_update_rx_dca(adapter, ring);
 #endif
-		ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
-		enable_mask |= rx_ring->v_idx;
+		ixgbe_clean_rx_irq(q_vector, ring, &work_done, budget);
 		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
 		                      r_idx + 1);
 	}
 
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
-	rx_ring = &(adapter->rx_ring[r_idx]);
+	ring = &(adapter->rx_ring[r_idx]);
 	/* If all Rx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
 		if (adapter->itr_setting & 1)
 			ixgbe_set_itr_msix(q_vector);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, enable_mask);
+			ixgbe_irq_enable_queues(adapter,
+			                        ((u64)1 << q_vector->v_idx));
 		return 0;
 	}
 
 	return work_done;
 }
+
+/**
+ * ixgbe_clean_txonly - msix (aka one shot) tx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function is optimized for cleaning one queue only on a single
+ * q_vector!!!
+ **/
+static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
+{
+	struct ixgbe_q_vector *q_vector =
+	                       container_of(napi, struct ixgbe_q_vector, napi);
+	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct ixgbe_ring *tx_ring = NULL;
+	int work_done = 0;
+	long r_idx;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	tx_ring = &(adapter->tx_ring[r_idx]);
+#ifdef CONFIG_IXGBE_DCA
+	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+		ixgbe_update_tx_dca(adapter, tx_ring);
+#endif
+
+	if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
+		work_done = budget;
+
+	/* If all Rx work done, exit the polling mode */
+	if (work_done < budget) {
+		napi_complete(napi);
+		if (adapter->itr_setting & 1)
+			ixgbe_set_itr_msix(q_vector);
+		if (!test_bit(__IXGBE_DOWN, &adapter->state))
+			ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	}
+
+	return work_done;
+}
+
 static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
                                      int r_idx)
 {
-	a->q_vector[v_idx].adapter = a;
-	set_bit(r_idx, a->q_vector[v_idx].rxr_idx);
-	a->q_vector[v_idx].rxr_count++;
-	a->rx_ring[r_idx].v_idx = 1 << v_idx;
+	struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
+
+	set_bit(r_idx, q_vector->rxr_idx);
+	q_vector->rxr_count++;
 }
 
 static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
-                                     int r_idx)
+                                     int t_idx)
 {
-	a->q_vector[v_idx].adapter = a;
-	set_bit(r_idx, a->q_vector[v_idx].txr_idx);
-	a->q_vector[v_idx].txr_count++;
-	a->tx_ring[r_idx].v_idx = 1 << v_idx;
+	struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
+
+	set_bit(t_idx, q_vector->txr_idx);
+	q_vector->txr_count++;
 }
 
 /**
@@ -1333,7 +1560,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
                          (!(_v)->txr_count) ? &ixgbe_msix_clean_rx : \
                          &ixgbe_msix_clean_many)
 	for (vector = 0; vector < q_vectors; vector++) {
-		handler = SET_HANDLER(&adapter->q_vector[vector]);
+		handler = SET_HANDLER(adapter->q_vector[vector]);
 
 		if(handler == &ixgbe_msix_clean_rx) {
 			sprintf(adapter->name[vector], "%s-%s-%d",
@@ -1349,7 +1576,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 
 		err = request_irq(adapter->msix_entries[vector].vector,
 		                  handler, 0, adapter->name[vector],
-		                  &(adapter->q_vector[vector]));
+		                  adapter->q_vector[vector]);
 		if (err) {
 			DPRINTK(PROBE, ERR,
 			        "request_irq failed for MSIX interrupt "
@@ -1372,7 +1599,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 free_queue_irqs:
 	for (i = vector - 1; i >= 0; i--)
 		free_irq(adapter->msix_entries[--vector].vector,
-		         &(adapter->q_vector[i]));
+		         adapter->q_vector[i]);
 	adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
 	pci_disable_msix(adapter->pdev);
 	kfree(adapter->msix_entries);
@@ -1383,7 +1610,7 @@ out:
 
 static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 {
-	struct ixgbe_q_vector *q_vector = adapter->q_vector;
+	struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
 	u8 current_itr;
 	u32 new_itr = q_vector->eitr;
 	struct ixgbe_ring *rx_ring = &adapter->rx_ring[0];
@@ -1416,14 +1643,13 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 	}
 
 	if (new_itr != q_vector->eitr) {
-		u32 itr_reg;
+		/* do an exponential smoothing */
+		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
 
 		/* save the algorithm value here, not the smoothed one */
 		q_vector->eitr = new_itr;
-		/* do an exponential smoothing */
-		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
-		itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
-		ixgbe_write_eitr(adapter, 0, itr_reg);
+
+		ixgbe_write_eitr(q_vector);
 	}
 
 	return;
@@ -1436,7 +1662,8 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
 {
 	u32 mask;
-	mask = IXGBE_EIMS_ENABLE_MASK;
+
+	mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
 	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
 		mask |= IXGBE_EIMS_GPI_SDP1;
 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
@@ -1444,16 +1671,12 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
 		mask |= IXGBE_EIMS_GPI_SDP1;
 		mask |= IXGBE_EIMS_GPI_SDP2;
 	}
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		mask |= IXGBE_EIMS_FLOW_DIR;
 
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		/* enable the rest of the queue vectors */
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1),
-		                (IXGBE_EIMS_RTX_QUEUE << 16));
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(2),
-		                ((IXGBE_EIMS_RTX_QUEUE << 16) |
-		                  IXGBE_EIMS_RTX_QUEUE));
-	}
+	ixgbe_irq_enable_queues(adapter, ~0);
 	IXGBE_WRITE_FLUSH(&adapter->hw);
 }
 
@@ -1467,6 +1690,7 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 	struct net_device *netdev = data;
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
 	u32 eicr;
 
 	/*
@@ -1494,13 +1718,13 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 
 	ixgbe_check_fan_failure(adapter, eicr);
 
-	if (napi_schedule_prep(&adapter->q_vector[0].napi)) {
+	if (napi_schedule_prep(&(q_vector->napi))) {
 		adapter->tx_ring[0].total_packets = 0;
 		adapter->tx_ring[0].total_bytes = 0;
 		adapter->rx_ring[0].total_packets = 0;
 		adapter->rx_ring[0].total_bytes = 0;
 		/* would disable interrupts here but EIAM disabled it */
-		__napi_schedule(&adapter->q_vector[0].napi);
+		__napi_schedule(&(q_vector->napi));
 	}
 
 	return IRQ_HANDLED;
@@ -1511,7 +1735,7 @@ static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter)
 	int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
 
 	for (i = 0; i < q_vectors; i++) {
-		struct ixgbe_q_vector *q_vector = &adapter->q_vector[i];
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
 		bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES);
 		bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES);
 		q_vector->rxr_count = 0;
@@ -1562,7 +1786,7 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
 		i--;
 		for (; i >= 0; i--) {
 			free_irq(adapter->msix_entries[i].vector,
-			         &(adapter->q_vector[i]));
+			         adapter->q_vector[i]);
 		}
 
 		ixgbe_reset_q_vectors(adapter);
@@ -1577,10 +1801,12 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
  **/
 static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
 {
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
+	} else {
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(2), ~0);
 	}
 	IXGBE_WRITE_FLUSH(&adapter->hw);
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
@@ -1592,18 +1818,6 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
 	}
 }
 
-static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter)
-{
-	u32 mask = IXGBE_EIMS_RTX_QUEUE;
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1), mask << 16);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(2),
-		                (mask << 16 | mask));
-	}
-	/* skip the flush */
-}
-
 /**
  * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
  *
@@ -1673,11 +1887,34 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
 	u32 srrctl;
 	int queue0 = 0;
 	unsigned long mask;
+	struct ixgbe_ring_feature *feature = adapter->ring_feature;
 
 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		queue0 = index;
+		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+			int dcb_i = feature[RING_F_DCB].indices;
+			if (dcb_i == 8)
+				queue0 = index >> 4;
+			else if (dcb_i == 4)
+				queue0 = index >> 5;
+			else
+				dev_err(&adapter->pdev->dev, "Invalid DCB "
+				        "configuration\n");
+#ifdef IXGBE_FCOE
+			if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+				struct ixgbe_ring_feature *f;
+
+				rx_ring = &adapter->rx_ring[queue0];
+				f = &adapter->ring_feature[RING_F_FCOE];
+				if ((queue0 == 0) && (index > rx_ring->reg_idx))
+					queue0 = f->mask + index -
+					         rx_ring->reg_idx - 1;
+			}
+#endif /* IXGBE_FCOE */
+		} else {
+			queue0 = index;
+		}
 	} else {
-		mask = (unsigned long) adapter->ring_feature[RING_F_RSS].mask;
+		mask = (unsigned long) feature[RING_F_RSS].mask;
 		queue0 = index & mask;
 		index = index & mask;
 	}
@@ -1689,33 +1926,55 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index)
 	srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
 	srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
 
+	srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
+		  IXGBE_SRRCTL_BSIZEHDR_MASK;
+
 	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
-		u16 bufsz = IXGBE_RXBUFFER_2048;
-		/* grow the amount we can receive on large page machines */
-		if (bufsz < (PAGE_SIZE / 2))
-			bufsz = (PAGE_SIZE / 2);
-		/* cap the bufsz at our largest descriptor size */
-		bufsz = min((u16)IXGBE_MAX_RXBUFFER, bufsz);
-
-		srrctl |= bufsz >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+#if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
+		srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+#else
+		srrctl |= (PAGE_SIZE / 2) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+#endif
 		srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
-		srrctl |= ((IXGBE_RX_HDR_SIZE <<
-		            IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
-		           IXGBE_SRRCTL_BSIZEHDR_MASK);
 	} else {
+		srrctl |= ALIGN(rx_ring->rx_buf_len, 1024) >>
+			  IXGBE_SRRCTL_BSIZEPKT_SHIFT;
 		srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
-
-		if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
-			srrctl |= IXGBE_RXBUFFER_2048 >>
-			          IXGBE_SRRCTL_BSIZEPKT_SHIFT;
-		else
-			srrctl |= rx_ring->rx_buf_len >>
-			          IXGBE_SRRCTL_BSIZEPKT_SHIFT;
 	}
 
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl);
 }
 
+static u32 ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
+{
+	u32 mrqc = 0;
+	int mask;
+
+	if (!(adapter->hw.mac.type == ixgbe_mac_82599EB))
+		return mrqc;
+
+	mask = adapter->flags & (IXGBE_FLAG_RSS_ENABLED
+#ifdef CONFIG_IXGBE_DCB
+				 | IXGBE_FLAG_DCB_ENABLED
+#endif
+				);
+
+	switch (mask) {
+	case (IXGBE_FLAG_RSS_ENABLED):
+		mrqc = IXGBE_MRQC_RSSEN;
+		break;
+#ifdef CONFIG_IXGBE_DCB
+	case (IXGBE_FLAG_DCB_ENABLED):
+		mrqc = IXGBE_MRQC_RT8TCEN;
+		break;
+#endif /* CONFIG_IXGBE_DCB */
+	default:
+		break;
+	}
+
+	return mrqc;
+}
+
 /**
  * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
  * @adapter: board private structure
@@ -1736,11 +1995,17 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	u32 fctrl, hlreg0;
 	u32 reta = 0, mrqc = 0;
 	u32 rdrxctl;
+	u32 rscctrl;
 	int rx_buf_len;
 
 	/* Decide whether to use packet split mode or not */
 	adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
 
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+#endif /* IXGBE_FCOE */
+
 	/* Set the RX buffer length according to the mode */
 	if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
 		rx_buf_len = IXGBE_RX_HDR_SIZE;
@@ -1749,11 +2014,13 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 			u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
 			              IXGBE_PSRTYPE_UDPHDR |
 			              IXGBE_PSRTYPE_IPV4HDR |
-			              IXGBE_PSRTYPE_IPV6HDR;
+			              IXGBE_PSRTYPE_IPV6HDR |
+			              IXGBE_PSRTYPE_L2HDR;
 			IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
 		}
 	} else {
-		if (netdev->mtu <= ETH_DATA_LEN)
+		if (!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED) &&
+		    (netdev->mtu <= ETH_DATA_LEN))
 			rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 		else
 			rx_buf_len = ALIGN(max_frame, 1024);
@@ -1770,6 +2037,10 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 		hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
 	else
 		hlreg0 |= IXGBE_HLREG0_JUMBOEN;
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		hlreg0 |= IXGBE_HLREG0_JUMBOEN;
+#endif
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 
 	rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
@@ -1777,8 +2048,10 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
 
-	/* Setup the HW Rx Head and Tail Descriptor Pointers and
-	 * the Base and Length of the Rx Descriptor Ring */
+	/*
+	 * Setup the HW Rx Head and Tail Descriptor Pointers and
+	 * the Base and Length of the Rx Descriptor Ring
+	 */
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		rdba = adapter->rx_ring[i].dma;
 		j = adapter->rx_ring[i].reg_idx;
@@ -1791,6 +2064,17 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 		adapter->rx_ring[i].tail = IXGBE_RDT(j);
 		adapter->rx_ring[i].rx_buf_len = rx_buf_len;
 
+#ifdef IXGBE_FCOE
+		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+			struct ixgbe_ring_feature *f;
+			f = &adapter->ring_feature[RING_F_FCOE];
+			if ((rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) &&
+			    (i >= f->mask) && (i < f->mask + f->indices))
+				adapter->rx_ring[i].rx_buf_len =
+				        IXGBE_FCOE_JUMBO_FRAME_SIZE;
+		}
+
+#endif /* IXGBE_FCOE */
 		ixgbe_configure_srrctl(adapter, j);
 	}
 
@@ -1811,23 +2095,8 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	}
 
 	/* Program MRQC for the distribution of queues */
-	if (hw->mac.type == ixgbe_mac_82599EB) {
-		int mask = adapter->flags & (
-				IXGBE_FLAG_RSS_ENABLED
-				| IXGBE_FLAG_DCB_ENABLED
-				);
+	mrqc = ixgbe_setup_mrqc(adapter);
 
-		switch (mask) {
-		case (IXGBE_FLAG_RSS_ENABLED):
-			mrqc = IXGBE_MRQC_RSSEN;
-			break;
-		case (IXGBE_FLAG_DCB_ENABLED):
-			mrqc = IXGBE_MRQC_RT8TCEN;
-			break;
-		default:
-			break;
-		}
-	}
 	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
 		/* Fill out redirection table */
 		for (i = 0, j = 0; i < 128; i++, j++) {
@@ -1875,8 +2144,45 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	if (hw->mac.type == ixgbe_mac_82599EB) {
 		rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
 		rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP;
+		rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE;
 		IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
 	}
+
+	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED) {
+		/* Enable 82599 HW-RSC */
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			j = adapter->rx_ring[i].reg_idx;
+			rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
+			rscctrl |= IXGBE_RSCCTL_RSCEN;
+			/*
+			 * we must limit the number of descriptors so that the
+			 * total size of max desc * buf_len is not greater
+			 * than 65535
+			 */
+			if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+#if (MAX_SKB_FRAGS > 16)
+				rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+#elif (MAX_SKB_FRAGS > 8)
+				rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+#elif (MAX_SKB_FRAGS > 4)
+				rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+#else
+				rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
+#endif
+			} else {
+				if (rx_buf_len < IXGBE_RXBUFFER_4096)
+					rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+				else if (rx_buf_len < IXGBE_RXBUFFER_8192)
+					rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+				else
+					rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+			}
+			IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
+		}
+		/* Disable RSC for ACK packets */
+		IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
+		   (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
+	}
 }
 
 static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
@@ -2015,11 +2321,7 @@ static void ixgbe_set_rx_mode(struct net_device *netdev)
 	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 
 	/* reprogram secondary unicast list */
-	addr_count = netdev->uc_count;
-	if (addr_count)
-		addr_list = netdev->uc_list->dmi_addr;
-	hw->mac.ops.update_uc_addr_list(hw, addr_list, addr_count,
-	                                  ixgbe_addr_list_itr);
+	hw->mac.ops.update_uc_addr_list(hw, &netdev->uc_list);
 
 	/* reprogram multicast list */
 	addr_count = netdev->mc_count;
@@ -2041,13 +2343,16 @@ static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
 
 	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
 		struct napi_struct *napi;
-		q_vector = &adapter->q_vector[q_idx];
-		if (!q_vector->rxr_count)
-			continue;
+		q_vector = adapter->q_vector[q_idx];
 		napi = &q_vector->napi;
-		if ((adapter->flags & IXGBE_FLAG_MSIX_ENABLED) &&
-		    (q_vector->rxr_count > 1))
-			napi->poll = &ixgbe_clean_rxonly_many;
+		if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+			if (!q_vector->rxr_count || !q_vector->txr_count) {
+				if (q_vector->txr_count == 1)
+					napi->poll = &ixgbe_clean_txonly;
+				else if (q_vector->rxr_count == 1)
+					napi->poll = &ixgbe_clean_rxonly;
+			}
+		}
 
 		napi_enable(napi);
 	}
@@ -2064,9 +2369,7 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
 		q_vectors = 1;
 
 	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
-		q_vector = &adapter->q_vector[q_idx];
-		if (!q_vector->rxr_count)
-			continue;
+		q_vector = adapter->q_vector[q_idx];
 		napi_disable(&q_vector->napi);
 	}
 }
@@ -2124,6 +2427,7 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 static void ixgbe_configure(struct ixgbe_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct ixgbe_hw *hw = &adapter->hw;
 	int i;
 
 	ixgbe_set_rx_mode(netdev);
@@ -2140,6 +2444,20 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter)
 	netif_set_gso_max_size(netdev, 65536);
 #endif
 
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		ixgbe_configure_fcoe(adapter);
+
+#endif /* IXGBE_FCOE */
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			adapter->tx_ring[i].atr_sample_rate =
+			                               adapter->atr_sample_rate;
+		ixgbe_init_fdir_signature_82599(hw, adapter->fdir_pballoc);
+	} else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) {
+		ixgbe_init_fdir_perfect_82599(hw, adapter->fdir_pballoc);
+	}
+
 	ixgbe_configure_tx(adapter);
 	ixgbe_configure_rx(adapter);
 	for (i = 0; i < adapter->num_rx_queues; i++)
@@ -2294,6 +2612,13 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
 	}
 
+#ifdef IXGBE_FCOE
+	/* adjust max frame to be able to do baby jumbo for FCoE */
+	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+	    (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE))
+		max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE;
+
+#endif /* IXGBE_FCOE */
 	mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
 	if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) {
 		mhadd &= ~IXGBE_MHADD_MFS_MASK;
@@ -2357,6 +2682,17 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	ixgbe_irq_enable(adapter);
 
 	/*
+	 * If this adapter has a fan, check to see if we had a failure
+	 * before we enabled the interrupt.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		if (esdp & IXGBE_ESDP_SDP1)
+			DPRINTK(DRV, CRIT,
+				"Fan has stopped, replace the adapter\n");
+	}
+
+	/*
 	 * For hot-pluggable SFP+ devices, a new SFP+ module may have
 	 * arrived before interrupts were enabled.  We need to kick off
 	 * the SFP+ module setup first, then try to bring up link.
@@ -2378,6 +2714,10 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 			DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err);
 	}
 
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		set_bit(__IXGBE_FDIR_INIT_DONE,
+		        &(adapter->tx_ring[i].reinit_state));
+
 	/* enable transmits */
 	netif_tx_start_all_queues(netdev);
 
@@ -2404,20 +2744,37 @@ int ixgbe_up(struct ixgbe_adapter *adapter)
 	/* hardware has been reset, we need to reload some things */
 	ixgbe_configure(adapter);
 
-	ixgbe_napi_add_all(adapter);
-
 	return ixgbe_up_complete(adapter);
 }
 
 void ixgbe_reset(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
-	if (hw->mac.ops.init_hw(hw))
-		dev_err(&adapter->pdev->dev, "Hardware Error\n");
+	int err;
+
+	err = hw->mac.ops.init_hw(hw);
+	switch (err) {
+	case 0:
+	case IXGBE_ERR_SFP_NOT_PRESENT:
+		break;
+	case IXGBE_ERR_MASTER_REQUESTS_PENDING:
+		dev_err(&adapter->pdev->dev, "master disable timed out\n");
+		break;
+	case IXGBE_ERR_EEPROM_VERSION:
+		/* We are running on a pre-production device, log a warning */
+		dev_warn(&adapter->pdev->dev, "This device is a pre-production "
+		         "adapter/LOM.  Please be aware there may be issues "
+		         "associated with your hardware.  If you are "
+		         "experiencing problems please contact your Intel or "
+		         "hardware representative who provided you with this "
+		         "hardware.\n");
+		break;
+	default:
+		dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
+	}
 
 	/* reprogram the RAR[0] in case user changed it. */
 	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
-
 }
 
 /**
@@ -2445,8 +2802,13 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
 			rx_buffer_info->dma = 0;
 		}
 		if (rx_buffer_info->skb) {
-			dev_kfree_skb(rx_buffer_info->skb);
+			struct sk_buff *skb = rx_buffer_info->skb;
 			rx_buffer_info->skb = NULL;
+			do {
+				struct sk_buff *this = skb;
+				skb = skb->prev;
+				dev_kfree_skb(this);
+			} while (skb);
 		}
 		if (!rx_buffer_info->page)
 			continue;
@@ -2560,6 +2922,10 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 	del_timer_sync(&adapter->watchdog_timer);
 	cancel_work_sync(&adapter->watchdog_task);
 
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		cancel_work_sync(&adapter->fdir_reinit_task);
+
 	/* disable transmits in the hardware now that interrupts are off */
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		j = adapter->tx_ring[i].reg_idx;
@@ -2575,13 +2941,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 	netif_carrier_off(netdev);
 
-#ifdef CONFIG_IXGBE_DCA
-	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
-		adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
-		dca_remove_requester(&adapter->pdev->dev);
-	}
-
-#endif
 	if (!pci_channel_offline(adapter->pdev))
 		ixgbe_reset(adapter);
 	ixgbe_clean_all_tx_rings(adapter);
@@ -2589,13 +2948,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 #ifdef CONFIG_IXGBE_DCA
 	/* since we reset the hardware DCA settings were cleared */
-	if (dca_add_requester(&adapter->pdev->dev) == 0) {
-		adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
-		/* always use CB2 mode, difference is masked
-		 * in the CB driver */
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_CTRL, 2);
-		ixgbe_setup_dca(adapter);
-	}
+	ixgbe_setup_dca(adapter);
 #endif
 }
 
@@ -2620,7 +2973,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
 	}
 #endif
 
-	tx_clean_complete = ixgbe_clean_tx_irq(adapter, adapter->tx_ring);
+	tx_clean_complete = ixgbe_clean_tx_irq(q_vector, adapter->tx_ring);
 	ixgbe_clean_rx_irq(q_vector, adapter->rx_ring, &work_done, budget);
 
 	if (!tx_clean_complete)
@@ -2632,7 +2985,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
 		if (adapter->itr_setting & 1)
 			ixgbe_set_itr(adapter);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
-			ixgbe_irq_enable_queues(adapter);
+			ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
 	}
 	return work_done;
 }
@@ -2668,17 +3021,15 @@ static void ixgbe_reset_task(struct work_struct *work)
 static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
 {
 	bool ret = false;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_DCB];
 
-	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-		adapter->ring_feature[RING_F_DCB].mask = 0x7 << 3;
-		adapter->num_rx_queues =
-		                      adapter->ring_feature[RING_F_DCB].indices;
-		adapter->num_tx_queues =
-		                      adapter->ring_feature[RING_F_DCB].indices;
-		ret = true;
-	} else {
-		ret = false;
-	}
+	if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+		return ret;
+
+	f->mask = 0x7 << 3;
+	adapter->num_rx_queues = f->indices;
+	adapter->num_tx_queues = f->indices;
+	ret = true;
 
 	return ret;
 }
@@ -2695,13 +3046,12 @@ static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
 static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
 {
 	bool ret = false;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_RSS];
 
 	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-		adapter->ring_feature[RING_F_RSS].mask = 0xF;
-		adapter->num_rx_queues =
-		                      adapter->ring_feature[RING_F_RSS].indices;
-		adapter->num_tx_queues =
-		                      adapter->ring_feature[RING_F_RSS].indices;
+		f->mask = 0xF;
+		adapter->num_rx_queues = f->indices;
+		adapter->num_tx_queues = f->indices;
 		ret = true;
 	} else {
 		ret = false;
@@ -2710,6 +3060,79 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
 	return ret;
 }
 
+/**
+ * ixgbe_set_fdir_queues: Allocate queues for Flow Director
+ * @adapter: board private structure to initialize
+ *
+ * Flow Director is an advanced Rx filter, attempting to get Rx flows back
+ * to the original CPU that initiated the Tx session.  This runs in addition
+ * to RSS, so if a packet doesn't match an FDIR filter, we can still spread the
+ * Rx load across CPUs using RSS.
+ *
+ **/
+static bool inline ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter)
+{
+	bool ret = false;
+	struct ixgbe_ring_feature *f_fdir = &adapter->ring_feature[RING_F_FDIR];
+
+	f_fdir->indices = min((int)num_online_cpus(), f_fdir->indices);
+	f_fdir->mask = 0;
+
+	/* Flow Director must have RSS enabled */
+	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED &&
+	    ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	     (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)))) {
+		adapter->num_tx_queues = f_fdir->indices;
+		adapter->num_rx_queues = f_fdir->indices;
+		ret = true;
+	} else {
+		adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+	}
+	return ret;
+}
+
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE)
+ * @adapter: board private structure to initialize
+ *
+ * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
+ * The ring feature mask is not used as a mask for FCoE, as it can take any 8
+ * rx queues out of the max number of rx queues, instead, it is used as the
+ * index of the first rx queue used by FCoE.
+ *
+ **/
+static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
+{
+	bool ret = false;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+	f->indices = min((int)num_online_cpus(), f->indices);
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+#ifdef CONFIG_IXGBE_DCB
+		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+			DPRINTK(PROBE, INFO, "FCOE enabled with DCB \n");
+			ixgbe_set_dcb_queues(adapter);
+		}
+#endif
+		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+			DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
+			ixgbe_set_rss_queues(adapter);
+		}
+		/* adding FCoE rx rings to the end */
+		f->mask = adapter->num_rx_queues;
+		adapter->num_rx_queues += f->indices;
+		if (adapter->num_tx_queues == 0)
+			adapter->num_tx_queues = f->indices;
+
+		ret = true;
+	}
+
+	return ret;
+}
+
+#endif /* IXGBE_FCOE */
 /*
  * ixgbe_set_num_queues: Allocate queues for device, feature dependant
  * @adapter: board private structure to initialize
@@ -2723,11 +3146,19 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
  **/
 static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
 {
+#ifdef IXGBE_FCOE
+	if (ixgbe_set_fcoe_queues(adapter))
+		goto done;
+
+#endif /* IXGBE_FCOE */
 #ifdef CONFIG_IXGBE_DCB
 	if (ixgbe_set_dcb_queues(adapter))
 		goto done;
 
 #endif
+	if (ixgbe_set_fdir_queues(adapter))
+		goto done;
+
 	if (ixgbe_set_rss_queues(adapter))
 		goto done;
 
@@ -2778,9 +3209,6 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
 		adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
 		kfree(adapter->msix_entries);
 		adapter->msix_entries = NULL;
-		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
-		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
-		ixgbe_set_num_queues(adapter);
 	} else {
 		adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
 		/*
@@ -2902,6 +3330,64 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
 #endif
 
 /**
+ * ixgbe_cache_ring_fdir - Descriptor ring to register mapping for Flow Director
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for Flow Director to the assigned rings.
+ *
+ **/
+static bool inline ixgbe_cache_ring_fdir(struct ixgbe_adapter *adapter)
+{
+	int i;
+	bool ret = false;
+
+	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED &&
+	    ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+	     (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i].reg_idx = i;
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			adapter->tx_ring[i].reg_idx = i;
+		ret = true;
+	}
+
+	return ret;
+}
+
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_cache_ring_fcoe - Descriptor ring to register mapping for the FCoE
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for FCoE mode to the assigned rings.
+ *
+ */
+static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
+{
+	int i, fcoe_i = 0;
+	bool ret = false;
+	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+#ifdef CONFIG_IXGBE_DCB
+		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+			ixgbe_cache_ring_dcb(adapter);
+			fcoe_i = adapter->rx_ring[0].reg_idx + 1;
+		}
+#endif /* CONFIG_IXGBE_DCB */
+		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+			ixgbe_cache_ring_rss(adapter);
+			fcoe_i = f->mask;
+		}
+		for (i = 0; i < f->indices; i++, fcoe_i++)
+			adapter->rx_ring[f->mask + i].reg_idx = fcoe_i;
+		ret = true;
+	}
+	return ret;
+}
+
+#endif /* IXGBE_FCOE */
+/**
  * ixgbe_cache_ring_register - Descriptor ring to register mapping
  * @adapter: board private structure to initialize
  *
@@ -2918,11 +3404,19 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 	adapter->rx_ring[0].reg_idx = 0;
 	adapter->tx_ring[0].reg_idx = 0;
 
+#ifdef IXGBE_FCOE
+	if (ixgbe_cache_ring_fcoe(adapter))
+		return;
+
+#endif /* IXGBE_FCOE */
 #ifdef CONFIG_IXGBE_DCB
 	if (ixgbe_cache_ring_dcb(adapter))
 		return;
 
 #endif
+	if (ixgbe_cache_ring_fdir(adapter))
+		return;
+
 	if (ixgbe_cache_ring_rss(adapter))
 		return;
 }
@@ -3004,31 +3498,23 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 	 * mean we disable MSI-X capabilities of the adapter. */
 	adapter->msix_entries = kcalloc(v_budget,
 	                                sizeof(struct msix_entry), GFP_KERNEL);
-	if (!adapter->msix_entries) {
-		adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
-		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
-		ixgbe_set_num_queues(adapter);
-		kfree(adapter->tx_ring);
-		kfree(adapter->rx_ring);
-		err = ixgbe_alloc_queues(adapter);
-		if (err) {
-			DPRINTK(PROBE, ERR, "Unable to allocate memory "
-			        "for queues\n");
-			goto out;
-		}
+	if (adapter->msix_entries) {
+		for (vector = 0; vector < v_budget; vector++)
+			adapter->msix_entries[vector].entry = vector;
 
-		goto try_msi;
-	}
+		ixgbe_acquire_msix_vectors(adapter, v_budget);
 
-	for (vector = 0; vector < v_budget; vector++)
-		adapter->msix_entries[vector].entry = vector;
-
-	ixgbe_acquire_msix_vectors(adapter, v_budget);
+		if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+			goto out;
+	}
 
-	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
-		goto out;
+	adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+	adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+	adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+	adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+	adapter->atr_sample_rate = 0;
+	ixgbe_set_num_queues(adapter);
 
-try_msi:
 	err = pci_enable_msi(adapter->pdev);
 	if (!err) {
 		adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
@@ -3043,6 +3529,79 @@ out:
 	return err;
 }
 
+/**
+ * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt.  If allocation fails we
+ * return -ENOMEM.
+ **/
+static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
+{
+	int q_idx, num_q_vectors;
+	struct ixgbe_q_vector *q_vector;
+	int napi_vectors;
+	int (*poll)(struct napi_struct *, int);
+
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+		napi_vectors = adapter->num_rx_queues;
+		poll = &ixgbe_clean_rxtx_many;
+	} else {
+		num_q_vectors = 1;
+		napi_vectors = 1;
+		poll = &ixgbe_poll;
+	}
+
+	for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+		q_vector = kzalloc(sizeof(struct ixgbe_q_vector), GFP_KERNEL);
+		if (!q_vector)
+			goto err_out;
+		q_vector->adapter = adapter;
+		q_vector->eitr = adapter->eitr_param;
+		q_vector->v_idx = q_idx;
+		netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
+		adapter->q_vector[q_idx] = q_vector;
+	}
+
+	return 0;
+
+err_out:
+	while (q_idx) {
+		q_idx--;
+		q_vector = adapter->q_vector[q_idx];
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+		adapter->q_vector[q_idx] = NULL;
+	}
+	return -ENOMEM;
+}
+
+/**
+ * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter)
+{
+	int q_idx, num_q_vectors;
+
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+		num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+	else
+		num_q_vectors = 1;
+
+	for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[q_idx];
+		adapter->q_vector[q_idx] = NULL;
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+	}
+}
+
 void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
 {
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
@@ -3074,18 +3633,25 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 	/* Number of supported queues */
 	ixgbe_set_num_queues(adapter);
 
-	err = ixgbe_alloc_queues(adapter);
-	if (err) {
-		DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
-		goto err_alloc_queues;
-	}
-
 	err = ixgbe_set_interrupt_capability(adapter);
 	if (err) {
 		DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n");
 		goto err_set_interrupt;
 	}
 
+	err = ixgbe_alloc_q_vectors(adapter);
+	if (err) {
+		DPRINTK(PROBE, ERR, "Unable to allocate memory for queue "
+		        "vectors\n");
+		goto err_alloc_q_vectors;
+	}
+
+	err = ixgbe_alloc_queues(adapter);
+	if (err) {
+		DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+		goto err_alloc_queues;
+	}
+
 	DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, "
 	        "Tx Queue count = %u\n",
 	        (adapter->num_rx_queues > 1) ? "Enabled" :
@@ -3095,11 +3661,30 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 
 	return 0;
 
+err_alloc_queues:
+	ixgbe_free_q_vectors(adapter);
+err_alloc_q_vectors:
+	ixgbe_reset_interrupt_capability(adapter);
 err_set_interrupt:
+	return err;
+}
+
+/**
+ * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
+ * @adapter: board private structure to clear interrupt scheme on
+ *
+ * We go through and clear interrupt specific resources and reset the structure
+ * to pre-load conditions
+ **/
+void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
+{
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
-err_alloc_queues:
-	return err;
+	adapter->tx_ring = NULL;
+	adapter->rx_ring = NULL;
+
+	ixgbe_free_q_vectors(adapter);
+	ixgbe_reset_interrupt_capability(adapter);
 }
 
 /**
@@ -3185,10 +3770,24 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	adapter->ring_feature[RING_F_RSS].indices = rss;
 	adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
 	adapter->ring_feature[RING_F_DCB].indices = IXGBE_MAX_DCB_INDICES;
-	if (hw->mac.type == ixgbe_mac_82598EB)
+	if (hw->mac.type == ixgbe_mac_82598EB) {
+		if (hw->device_id == IXGBE_DEV_ID_82598AT)
+			adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
-	else if (hw->mac.type == ixgbe_mac_82599EB)
+	} else if (hw->mac.type == ixgbe_mac_82599EB) {
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
+		adapter->flags |= IXGBE_FLAG2_RSC_CAPABLE;
+		adapter->flags |= IXGBE_FLAG2_RSC_ENABLED;
+		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+		adapter->ring_feature[RING_F_FDIR].indices =
+		                                         IXGBE_MAX_FDIR_INDICES;
+		adapter->atr_sample_rate = 20;
+		adapter->fdir_pballoc = 0;
+#ifdef IXGBE_FCOE
+		adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+		adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+#endif /* IXGBE_FCOE */
+	}
 
 #ifdef CONFIG_IXGBE_DCB
 	/* Configure DCB traffic classes */
@@ -3203,6 +3802,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100;
 	adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100;
 	adapter->dcb_cfg.rx_pba_cfg = pba_equal;
+	adapter->dcb_cfg.pfc_mode_enable = false;
 	adapter->dcb_cfg.round_robin_enable = false;
 	adapter->dcb_set_bitmap = 0x00;
 	ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg,
@@ -3213,6 +3813,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	/* default flow control settings */
 	hw->fc.requested_mode = ixgbe_fc_full;
 	hw->fc.current_mode = ixgbe_fc_full;	/* init for ethtool output */
+#ifdef CONFIG_DCB
+	adapter->last_lfc_mode = hw->fc.current_mode;
+#endif
 	hw->fc.high_water = IXGBE_DEFAULT_FCRTH;
 	hw->fc.low_water = IXGBE_DEFAULT_FCRTL;
 	hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
@@ -3503,6 +4106,8 @@ static int ixgbe_open(struct net_device *netdev)
 	if (test_bit(__IXGBE_TESTING, &adapter->state))
 		return -EBUSY;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = ixgbe_setup_all_tx_resources(adapter);
 	if (err)
@@ -3515,8 +4120,6 @@ static int ixgbe_open(struct net_device *netdev)
 
 	ixgbe_configure(adapter);
 
-	ixgbe_napi_add_all(adapter);
-
 	err = ixgbe_request_irq(adapter);
 	if (err)
 		goto err_req_irq;
@@ -3568,55 +4171,6 @@ static int ixgbe_close(struct net_device *netdev)
 	return 0;
 }
 
-/**
- * ixgbe_napi_add_all - prep napi structs for use
- * @adapter: private struct
- *
- * helper function to napi_add each possible q_vector->napi
- */
-void ixgbe_napi_add_all(struct ixgbe_adapter *adapter)
-{
-	int q_idx, q_vectors;
-	struct net_device *netdev = adapter->netdev;
-	int (*poll)(struct napi_struct *, int);
-
-	/* check if we already have our netdev->napi_list populated */
-	if (&netdev->napi_list != netdev->napi_list.next)
-		return;
-
-	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
-		poll = &ixgbe_clean_rxonly;
-		/* Only enable as many vectors as we have rx queues. */
-		q_vectors = adapter->num_rx_queues;
-	} else {
-		poll = &ixgbe_poll;
-		/* only one q_vector for legacy modes */
-		q_vectors = 1;
-	}
-
-	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
-		struct ixgbe_q_vector *q_vector = &adapter->q_vector[q_idx];
-		netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
-	}
-}
-
-void ixgbe_napi_del_all(struct ixgbe_adapter *adapter)
-{
-	int q_idx;
-	int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
-	/* legacy and MSI only use one vector */
-	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
-		q_vectors = 1;
-
-	for (q_idx = 0; q_idx < q_vectors; q_idx++) {
-		struct ixgbe_q_vector *q_vector = &adapter->q_vector[q_idx];
-		if (!q_vector->rxr_count)
-			continue;
-		netif_napi_del(&q_vector->napi);
-	}
-}
-
 #ifdef CONFIG_PM
 static int ixgbe_resume(struct pci_dev *pdev)
 {
@@ -3626,7 +4180,8 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
-	err = pci_enable_device(pdev);
+
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		printk(KERN_ERR "ixgbe: Cannot enable PCI device from "
 				"suspend\n");
@@ -3634,8 +4189,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
 	}
 	pci_set_master(pdev);
 
-	pci_enable_wake(pdev, PCI_D3hot, 0);
-	pci_enable_wake(pdev, PCI_D3cold, 0);
+	pci_wake_from_d3(pdev, false);
 
 	err = ixgbe_init_interrupt_scheme(adapter);
 	if (err) {
@@ -3679,11 +4233,7 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		ixgbe_free_all_tx_resources(adapter);
 		ixgbe_free_all_rx_resources(adapter);
 	}
-	ixgbe_reset_interrupt_capability(adapter);
-	ixgbe_napi_del_all(adapter);
-	INIT_LIST_HEAD(&netdev->napi_list);
-	kfree(adapter->tx_ring);
-	kfree(adapter->rx_ring);
+	ixgbe_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
@@ -3711,13 +4261,10 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0);
 	}
 
-	if (wufc && hw->mac.type == ixgbe_mac_82599EB) {
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-		pci_enable_wake(pdev, PCI_D3cold, 1);
-	} else {
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_enable_wake(pdev, PCI_D3cold, 0);
-	}
+	if (wufc && hw->mac.type == ixgbe_mac_82599EB)
+		pci_wake_from_d3(pdev, true);
+	else
+		pci_wake_from_d3(pdev, false);
 
 	*enable_wake = !!wufc;
 
@@ -3772,9 +4319,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 	u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
 
 	if (hw->mac.type == ixgbe_mac_82599EB) {
+		u64 rsc_count = 0;
 		for (i = 0; i < 16; i++)
 			adapter->hw_rx_no_dma_resources +=
 			                     IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			rsc_count += adapter->rx_ring[i].rsc_count;
+		adapter->rsc_count = rsc_count;
 	}
 
 	adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
@@ -3821,6 +4372,16 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 		IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
 		adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
 		adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+		adapter->stats.fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+		adapter->stats.fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+#ifdef IXGBE_FCOE
+		adapter->stats.fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
+		adapter->stats.fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
+		adapter->stats.fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
+		adapter->stats.fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
+		adapter->stats.fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
+		adapter->stats.fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
+#endif /* IXGBE_FCOE */
 	} else {
 		adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
 		adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
@@ -3888,64 +4449,43 @@ static void ixgbe_watchdog(unsigned long data)
 {
 	struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
 	struct ixgbe_hw *hw = &adapter->hw;
+	u64 eics = 0;
+	int i;
 
-	/* Do the watchdog outside of interrupt context due to the lovely
-	 * delays that some of the newer hardware requires */
-	if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
-		u64 eics = 0;
-		int i;
+	/*
+	 *  Do the watchdog outside of interrupt context due to the lovely
+	 * delays that some of the newer hardware requires
+	 */
 
-		for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++)
-			eics |= (1 << i);
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		goto watchdog_short_circuit;
 
-		/* Cause software interrupt to ensure rx rings are cleaned */
-		switch (hw->mac.type) {
-		case ixgbe_mac_82598EB:
-			if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
-				IXGBE_WRITE_REG(hw, IXGBE_EICS, (u32)eics);
-			} else {
-				/*
-				 * for legacy and MSI interrupts don't set any
-				 * bits that are enabled for EIAM, because this
-				 * operation would set *both* EIMS and EICS for
-				 * any bit in EIAM
-				 */
-				IXGBE_WRITE_REG(hw, IXGBE_EICS,
-				     (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
-			}
-			break;
-		case ixgbe_mac_82599EB:
-			if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
-				/*
-				 * EICS(0..15) first 0-15 q vectors
-				 * EICS[1] (16..31) q vectors 16-31
-				 * EICS[2] (0..31) q vectors 32-63
-				 */
-				IXGBE_WRITE_REG(hw, IXGBE_EICS,
-				                (u32)(eics & 0xFFFF));
-				IXGBE_WRITE_REG(hw, IXGBE_EICS_EX(1),
-				                (u32)(eics & 0xFFFF0000));
-				IXGBE_WRITE_REG(hw, IXGBE_EICS_EX(2),
-				                (u32)(eics >> 32));
-			} else {
-				/*
-				 * for legacy and MSI interrupts don't set any
-				 * bits that are enabled for EIAM, because this
-				 * operation would set *both* EIMS and EICS for
-				 * any bit in EIAM
-				 */
-				IXGBE_WRITE_REG(hw, IXGBE_EICS,
-				     (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
-			}
-			break;
-		default:
-			break;
-		}
-		/* Reset the timer */
-		mod_timer(&adapter->watchdog_timer,
-		          round_jiffies(jiffies + 2 * HZ));
+	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+		/*
+		 * for legacy and MSI interrupts don't set any bits
+		 * that are enabled for EIAM, because this operation
+		 * would set *both* EIMS and EICS for any bit in EIAM
+		 */
+		IXGBE_WRITE_REG(hw, IXGBE_EICS,
+			(IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
+		goto watchdog_reschedule;
 	}
 
+	/* get one bit for every active tx/rx interrupt vector */
+	for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
+		struct ixgbe_q_vector *qv = adapter->q_vector[i];
+		if (qv->rxr_count || qv->txr_count)
+			eics |= ((u64)1 << i);
+	}
+
+	/* Cause software interrupt to ensure rx rings are cleaned */
+	ixgbe_irq_rearm_queues(adapter, eics);
+
+watchdog_reschedule:
+	/* Reset the timer */
+	mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
+
+watchdog_short_circuit:
 	schedule_work(&adapter->watchdog_task);
 }
 
@@ -3999,6 +4539,30 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
 }
 
 /**
+ * ixgbe_fdir_reinit_task - worker thread to reinit FDIR filter table
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbe_fdir_reinit_task(struct work_struct *work)
+{
+	struct ixgbe_adapter *adapter = container_of(work,
+	                                             struct ixgbe_adapter,
+	                                             fdir_reinit_task);
+	struct ixgbe_hw *hw = &adapter->hw;
+	int i;
+
+	if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			set_bit(__IXGBE_FDIR_INIT_DONE,
+			        &(adapter->tx_ring[i].reinit_state));
+	} else {
+		DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, "
+		        "ignored adding FDIR ATR filters \n");
+	}
+	/* Done FDIR Re-initialization, enable transmits */
+	netif_tx_start_all_queues(adapter->netdev);
+}
+
+/**
  * ixgbe_watchdog_task - worker thread to bring link up
  * @work: pointer to work_struct containing our data
  **/
@@ -4011,16 +4575,32 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 link_speed = adapter->link_speed;
 	bool link_up = adapter->link_up;
+	int i;
+	struct ixgbe_ring *tx_ring;
+	int some_tx_pending = 0;
 
 	adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
 
 	if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
 		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (link_up) {
+#ifdef CONFIG_DCB
+			if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+				for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+					hw->mac.ops.fc_enable(hw, i);
+			} else {
+				hw->mac.ops.fc_enable(hw, 0);
+			}
+#else
+			hw->mac.ops.fc_enable(hw, 0);
+#endif
+		}
+
 		if (link_up ||
 		    time_after(jiffies, (adapter->link_check_timeout +
 		                         IXGBE_TRY_LINK_TIMEOUT))) {
-			IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
 			adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+			IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
 		}
 		adapter->link_up = link_up;
 		adapter->link_speed = link_speed;
@@ -4068,6 +4648,25 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 		}
 	}
 
+	if (!netif_carrier_ok(netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			tx_ring = &adapter->tx_ring[i];
+			if (tx_ring->next_to_use != tx_ring->next_to_clean) {
+				some_tx_pending = 1;
+				break;
+			}
+		}
+
+		if (some_tx_pending) {
+			/* We've lost link, so the controller stops DMA,
+			 * but we've got queued Tx work that's never going
+			 * to get done, so reset controller to flush Tx.
+			 * (Do the reset outside of interrupt context).
+			 */
+			 schedule_work(&adapter->reset_task);
+		}
+	}
+
 	ixgbe_update_stats(adapter);
 	adapter->flags &= ~IXGBE_FLAG_IN_WATCHDOG_TASK;
 }
@@ -4196,12 +4795,18 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 				if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 					type_tucmd_mlhl |=
 					        IXGBE_ADVTXD_TUCMD_L4T_TCP;
+				else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
+					type_tucmd_mlhl |=
+					        IXGBE_ADVTXD_TUCMD_L4T_SCTP;
 				break;
 			case cpu_to_be16(ETH_P_IPV6):
 				/* XXX what about other V6 headers?? */
 				if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
 					type_tucmd_mlhl |=
 					        IXGBE_ADVTXD_TUCMD_L4T_TCP;
+				else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
+					type_tucmd_mlhl |=
+					        IXGBE_ADVTXD_TUCMD_L4T_SCTP;
 				break;
 			default:
 				if (unlikely(net_ratelimit())) {
@@ -4234,10 +4839,12 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 
 static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
                         struct ixgbe_ring *tx_ring,
-                        struct sk_buff *skb, unsigned int first)
+                        struct sk_buff *skb, u32 tx_flags,
+                        unsigned int first)
 {
 	struct ixgbe_tx_buffer *tx_buffer_info;
-	unsigned int len = skb_headlen(skb);
+	unsigned int len;
+	unsigned int total = skb->len;
 	unsigned int offset = 0, size, count = 0, i;
 	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
 	unsigned int f;
@@ -4252,16 +4859,22 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 
 	map = skb_shinfo(skb)->dma_maps;
 
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE)
+		/* excluding fcoe_crc_eof for FCoE */
+		total -= sizeof(struct fcoe_crc_eof);
+
+	len = min(skb_headlen(skb), total);
 	while (len) {
 		tx_buffer_info = &tx_ring->tx_buffer_info[i];
 		size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
 
 		tx_buffer_info->length = size;
-		tx_buffer_info->dma = map[0] + offset;
+		tx_buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
 		tx_buffer_info->time_stamp = jiffies;
 		tx_buffer_info->next_to_watch = i;
 
 		len -= size;
+		total -= size;
 		offset += size;
 		count++;
 
@@ -4276,7 +4889,7 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 		struct skb_frag_struct *frag;
 
 		frag = &skb_shinfo(skb)->frags[f];
-		len = frag->size;
+		len = min((unsigned int)frag->size, total);
 		offset = 0;
 
 		while (len) {
@@ -4288,14 +4901,17 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 			size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
 
 			tx_buffer_info->length = size;
-			tx_buffer_info->dma = map[f + 1] + offset;
+			tx_buffer_info->dma = map[f] + offset;
 			tx_buffer_info->time_stamp = jiffies;
 			tx_buffer_info->next_to_watch = i;
 
 			len -= size;
+			total -= size;
 			offset += size;
 			count++;
 		}
+		if (total == 0)
+			break;
 	}
 
 	tx_ring->tx_buffer_info[i].skb = skb;
@@ -4337,6 +4953,13 @@ static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
 		olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
 		                 IXGBE_ADVTXD_POPTS_SHIFT;
 
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
+		olinfo_status |= IXGBE_ADVTXD_CC;
+		olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
+		if (tx_flags & IXGBE_TX_FLAGS_FSO)
+			cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
+	}
+
 	olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
 
 	i = tx_ring->next_to_use;
@@ -4366,6 +4989,58 @@ static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
 	writel(i, adapter->hw.hw_addr + tx_ring->tail);
 }
 
+static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
+	              int queue, u32 tx_flags)
+{
+	/* Right now, we support IPv4 only */
+	struct ixgbe_atr_input atr_input;
+	struct tcphdr *th;
+	struct udphdr *uh;
+	struct iphdr *iph = ip_hdr(skb);
+	struct ethhdr *eth = (struct ethhdr *)skb->data;
+	u16 vlan_id, src_port, dst_port, flex_bytes;
+	u32 src_ipv4_addr, dst_ipv4_addr;
+	u8 l4type = 0;
+
+	/* check if we're UDP or TCP */
+	if (iph->protocol == IPPROTO_TCP) {
+		th = tcp_hdr(skb);
+		src_port = th->source;
+		dst_port = th->dest;
+		l4type |= IXGBE_ATR_L4TYPE_TCP;
+		/* l4type IPv4 type is 0, no need to assign */
+	} else if(iph->protocol == IPPROTO_UDP) {
+		uh = udp_hdr(skb);
+		src_port = uh->source;
+		dst_port = uh->dest;
+		l4type |= IXGBE_ATR_L4TYPE_UDP;
+		/* l4type IPv4 type is 0, no need to assign */
+	} else {
+		/* Unsupported L4 header, just bail here */
+		return;
+	}
+
+	memset(&atr_input, 0, sizeof(struct ixgbe_atr_input));
+
+	vlan_id = (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK) >>
+	           IXGBE_TX_FLAGS_VLAN_SHIFT;
+	src_ipv4_addr = iph->saddr;
+	dst_ipv4_addr = iph->daddr;
+	flex_bytes = eth->h_proto;
+
+	ixgbe_atr_set_vlan_id_82599(&atr_input, vlan_id);
+	ixgbe_atr_set_src_port_82599(&atr_input, dst_port);
+	ixgbe_atr_set_dst_port_82599(&atr_input, src_port);
+	ixgbe_atr_set_flex_byte_82599(&atr_input, flex_bytes);
+	ixgbe_atr_set_l4type_82599(&atr_input, l4type);
+	/* src and dst are inverted, think how the receiver sees them */
+	ixgbe_atr_set_src_ipv4_82599(&atr_input, dst_ipv4_addr);
+	ixgbe_atr_set_dst_ipv4_82599(&atr_input, src_ipv4_addr);
+
+	/* This assumes the Rx queue and Tx queue are bound to the same CPU */
+	ixgbe_fdir_add_signature_filter_82599(&adapter->hw, &atr_input, queue);
+}
+
 static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
                                  struct ixgbe_ring *tx_ring, int size)
 {
@@ -4400,6 +5075,9 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
+		return smp_processor_id();
+
 	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
 		return 0;  /* All traffic should default to class 0 */
 
@@ -4433,10 +5111,16 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
 		tx_flags |= IXGBE_TX_FLAGS_VLAN;
 	}
-	/* three things can cause us to need a context descriptor */
+
+	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+	    (skb->protocol == htons(ETH_P_FCOE)))
+		tx_flags |= IXGBE_TX_FLAGS_FCOE;
+
+	/* four things can cause us to need a context descriptor */
 	if (skb_is_gso(skb) ||
 	    (skb->ip_summed == CHECKSUM_PARTIAL) ||
-	    (tx_flags & IXGBE_TX_FLAGS_VLAN))
+	    (tx_flags & IXGBE_TX_FLAGS_VLAN) ||
+	    (tx_flags & IXGBE_TX_FLAGS_FCOE))
 		count++;
 
 	count += TXD_USE_COUNT(skb_headlen(skb));
@@ -4448,27 +5132,49 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		return NETDEV_TX_BUSY;
 	}
 
-	if (skb->protocol == htons(ETH_P_IP))
-		tx_flags |= IXGBE_TX_FLAGS_IPV4;
 	first = tx_ring->next_to_use;
-	tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
-	if (tso < 0) {
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
-
-	if (tso)
-		tx_flags |= IXGBE_TX_FLAGS_TSO;
-	else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) &&
-	         (skb->ip_summed == CHECKSUM_PARTIAL))
-		tx_flags |= IXGBE_TX_FLAGS_CSUM;
+	if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
+#ifdef IXGBE_FCOE
+		/* setup tx offload for FCoE */
+		tso = ixgbe_fso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+		if (tso < 0) {
+			dev_kfree_skb_any(skb);
+			return NETDEV_TX_OK;
+		}
+		if (tso)
+			tx_flags |= IXGBE_TX_FLAGS_FSO;
+#endif /* IXGBE_FCOE */
+	} else {
+		if (skb->protocol == htons(ETH_P_IP))
+			tx_flags |= IXGBE_TX_FLAGS_IPV4;
+		tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+		if (tso < 0) {
+			dev_kfree_skb_any(skb);
+			return NETDEV_TX_OK;
+		}
 
-	count = ixgbe_tx_map(adapter, tx_ring, skb, first);
+		if (tso)
+			tx_flags |= IXGBE_TX_FLAGS_TSO;
+		else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+			 (skb->ip_summed == CHECKSUM_PARTIAL))
+			tx_flags |= IXGBE_TX_FLAGS_CSUM;
+	}
 
+	count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first);
 	if (count) {
+		/* add the ATR filter if ATR is on */
+		if (tx_ring->atr_sample_rate) {
+			++tx_ring->atr_count;
+			if ((tx_ring->atr_count >= tx_ring->atr_sample_rate) &&
+		             test_bit(__IXGBE_FDIR_INIT_DONE,
+                                      &tx_ring->reinit_state)) {
+				ixgbe_atr(adapter, skb, tx_ring->queue_index,
+				          tx_flags);
+				tx_ring->atr_count = 0;
+			}
+		}
 		ixgbe_tx_queue(adapter, tx_ring, tx_flags, count, skb->len,
 		               hdr_len);
-		netdev->trans_start = jiffies;
 		ixgbe_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
 
 	} else {
@@ -4519,6 +5225,82 @@ static int ixgbe_set_mac(struct net_device *netdev, void *p)
 	return 0;
 }
 
+static int
+ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 value;
+	int rc;
+
+	if (prtad != hw->phy.mdio.prtad)
+		return -EINVAL;
+	rc = hw->phy.ops.read_reg(hw, addr, devad, &value);
+	if (!rc)
+		rc = value;
+	return rc;
+}
+
+static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad,
+			    u16 addr, u16 value)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (prtad != hw->phy.mdio.prtad)
+		return -EINVAL;
+	return hw->phy.ops.write_reg(hw, addr, devad, value);
+}
+
+static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+	return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd);
+}
+
+/**
+ * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
+ * netdev->dev_addr_list
+ * @netdev: network interface device structure
+ *
+ * Returns non-zero on failure
+ **/
+static int ixgbe_add_sanmac_netdev(struct net_device *dev)
+{
+	int err = 0;
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+	if (is_valid_ether_addr(mac->san_addr)) {
+		rtnl_lock();
+		err = dev_addr_add(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+	return err;
+}
+
+/**
+ * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
+ * netdev->dev_addr_list
+ * @netdev: network interface device structure
+ *
+ * Returns non-zero on failure
+ **/
+static int ixgbe_del_sanmac_netdev(struct net_device *dev)
+{
+	int err = 0;
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+	if (is_valid_ether_addr(mac->san_addr)) {
+		rtnl_lock();
+		err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+	return err;
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
@@ -4552,9 +5334,14 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_vlan_rx_register	= ixgbe_vlan_rx_register,
 	.ndo_vlan_rx_add_vid	= ixgbe_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= ixgbe_vlan_rx_kill_vid,
+	.ndo_do_ioctl		= ixgbe_ioctl,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ixgbe_netpoll,
 #endif
+#ifdef IXGBE_FCOE
+	.ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get,
+	.ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
+#endif /* IXGBE_FCOE */
 };
 
 /**
@@ -4577,9 +5364,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
 	static int cards_found;
 	int i, err, pci_using_dac;
+#ifdef IXGBE_FCOE
+	u16 device_caps;
+#endif
 	u32 part_num, eec;
 
-	err = pci_enable_device(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err)
 		return err;
 
@@ -4599,9 +5389,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		pci_using_dac = 0;
 	}
 
-	err = pci_request_regions(pdev, ixgbe_driver_name);
+	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+	                                   IORESOURCE_MEM), ixgbe_driver_name);
 	if (err) {
-		dev_err(&pdev->dev, "pci_request_regions failed 0x%x\n", err);
+		dev_err(&pdev->dev,
+		        "pci_request_selected_regions failed 0x%x\n", err);
 		goto err_pci_reg;
 	}
 
@@ -4665,6 +5457,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	/* PHY */
 	memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
 	hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+	/* ixgbe_identify_phy_generic will set prtad and mmds properly */
+	hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
+	hw->phy.mdio.mmds = 0;
+	hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	hw->phy.mdio.dev = netdev;
+	hw->phy.mdio.mdio_read = ixgbe_mdio_read;
+	hw->phy.mdio.mdio_write = ixgbe_mdio_write;
 
 	/* set up this timer and work struct before calling get_invariants
 	 * which might start the timer
@@ -4682,29 +5481,42 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	INIT_WORK(&adapter->sfp_config_module_task,
 	          ixgbe_sfp_config_module_task);
 
-	err = ii->get_invariants(hw);
-	if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
-		/* start a kernel thread to watch for a module to arrive */
-		set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
-		mod_timer(&adapter->sfp_timer,
-		          round_jiffies(jiffies + (2 * HZ)));
-		err = 0;
-	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		DPRINTK(PROBE, ERR, "failed to load because an "
-		        "unsupported SFP+ module type was detected.\n");
-		goto err_hw_init;
-	} else if (err) {
-		goto err_hw_init;
-	}
+	ii->get_invariants(hw);
 
 	/* setup the private structure */
 	err = ixgbe_sw_init(adapter);
 	if (err)
 		goto err_sw_init;
 
+	/*
+	 * If there is a fan on this device and it has failed log the
+	 * failure.
+	 */
+	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		if (esdp & IXGBE_ESDP_SDP1)
+			DPRINTK(PROBE, CRIT,
+				"Fan has stopped, replace the adapter\n");
+	}
+
 	/* reset_hw fills in the perm_addr as well */
 	err = hw->mac.ops.reset_hw(hw);
-	if (err) {
+	if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
+	    hw->mac.type == ixgbe_mac_82598EB) {
+		/*
+		 * Start a kernel thread to watch for a module to arrive.
+		 * Only do this for 82598, since 82599 will generate
+		 * interrupts on module arrival.
+		 */
+		set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+		mod_timer(&adapter->sfp_timer,
+			  round_jiffies(jiffies + (2 * HZ)));
+		err = 0;
+	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+		dev_err(&adapter->pdev->dev, "failed to load because an "
+		        "unsupported SFP+ module type was detected.\n");
+		goto err_sw_init;
+	} else if (err) {
 		dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
 		goto err_sw_init;
 	}
@@ -4720,6 +5532,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->features |= NETIF_F_TSO6;
 	netdev->features |= NETIF_F_GRO;
 
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+		netdev->features |= NETIF_F_SCTP_CSUM;
+
 	netdev->vlan_features |= NETIF_F_TSO;
 	netdev->vlan_features |= NETIF_F_TSO6;
 	netdev->vlan_features |= NETIF_F_IP_CSUM;
@@ -4732,9 +5547,32 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->dcbnl_ops = &dcbnl_ops;
 #endif
 
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+		if (hw->mac.ops.get_device_caps) {
+			hw->mac.ops.get_device_caps(hw, &device_caps);
+			if (!(device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)) {
+				netdev->features |= NETIF_F_FCOE_CRC;
+				netdev->features |= NETIF_F_FSO;
+				netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+				DPRINTK(DRV, INFO, "FCoE enabled, "
+					"disabling Flow Director\n");
+				adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+				adapter->flags &=
+				        ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+				adapter->atr_sample_rate = 0;
+			} else {
+				adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+			}
+		}
+	}
+#endif /* IXGBE_FCOE */
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
+	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED)
+		netdev->features |= NETIF_F_LRO;
+
 	/* make sure the EEPROM is good */
 	if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
 		dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
@@ -4766,6 +5604,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	case IXGBE_DEV_ID_82599_KX4:
 		adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
 		                IXGBE_WUFC_MC | IXGBE_WUFC_BC);
+		/* Enable ACPI wakeup in GRC */
+		IXGBE_WRITE_REG(hw, IXGBE_GRC,
+		             (IXGBE_READ_REG(hw, IXGBE_GRC) & ~IXGBE_GRC_APME));
 		break;
 	default:
 		adapter->wol = 0;
@@ -4774,6 +5615,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	device_init_wakeup(&adapter->pdev->dev, true);
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
+	/* pick up the PCI bus settings for reporting later */
+	hw->mac.ops.get_bus_info(hw);
+
 	/* print bus type/speed/width info */
 	dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n",
 	        ((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s":
@@ -4805,24 +5649,37 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version);
 
 	/* reset the hardware with the new settings */
-	hw->mac.ops.start_hw(hw);
-
-	netif_carrier_off(netdev);
+	err = hw->mac.ops.start_hw(hw);
 
+	if (err == IXGBE_ERR_EEPROM_VERSION) {
+		/* We are running on a pre-production device, log a warning */
+		dev_warn(&pdev->dev, "This device is a pre-production "
+		         "adapter/LOM.  Please be aware there may be issues "
+		         "associated with your hardware.  If you are "
+		         "experiencing problems please contact your Intel or "
+		         "hardware representative who provided you with this "
+		         "hardware.\n");
+	}
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
 	if (err)
 		goto err_register;
 
+	/* carrier off reporting is important to ethtool even BEFORE open */
+	netif_carrier_off(netdev);
+
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task);
+
 #ifdef CONFIG_IXGBE_DCA
 	if (dca_add_requester(&pdev->dev) == 0) {
 		adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
-		/* always use CB2 mode, difference is masked
-		 * in the CB driver */
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_CTRL, 2);
 		ixgbe_setup_dca(adapter);
 	}
 #endif
+	/* add san mac addr to netdev */
+	ixgbe_add_sanmac_netdev(netdev);
 
 	dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n");
 	cards_found++;
@@ -4830,9 +5687,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 err_register:
 	ixgbe_release_hw_control(adapter);
-err_hw_init:
+	ixgbe_clear_interrupt_scheme(adapter);
 err_sw_init:
-	ixgbe_reset_interrupt_capability(adapter);
 err_eeprom:
 	clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
 	del_timer_sync(&adapter->sfp_timer);
@@ -4843,7 +5699,8 @@ err_eeprom:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, pci_select_bars(pdev,
+	                             IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -4877,6 +5734,9 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	cancel_work_sync(&adapter->sfp_task);
 	cancel_work_sync(&adapter->multispeed_fiber_task);
 	cancel_work_sync(&adapter->sfp_config_module_task);
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+		cancel_work_sync(&adapter->fdir_reinit_task);
 	flush_scheduled_work();
 
 #ifdef CONFIG_IXGBE_DCA
@@ -4887,19 +5747,27 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	}
 
 #endif
+#ifdef IXGBE_FCOE
+	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+		ixgbe_cleanup_fcoe(adapter);
+
+#endif /* IXGBE_FCOE */
+
+	/* remove the added san mac */
+	ixgbe_del_sanmac_netdev(netdev);
+
 	if (netdev->reg_state == NETREG_REGISTERED)
 		unregister_netdev(netdev);
 
-	ixgbe_reset_interrupt_capability(adapter);
+	ixgbe_clear_interrupt_scheme(adapter);
 
 	ixgbe_release_hw_control(adapter);
 
 	iounmap(adapter->hw.hw_addr);
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, pci_select_bars(pdev,
+	                             IORESOURCE_MEM));
 
 	DPRINTK(PROBE, INFO, "complete\n");
-	kfree(adapter->tx_ring);
-	kfree(adapter->rx_ring);
 
 	free_netdev(netdev);
 
@@ -4927,6 +5795,9 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
 
 	netif_device_detach(netdev);
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	if (netif_running(netdev))
 		ixgbe_down(adapter);
 	pci_disable_device(pdev);
@@ -4948,7 +5819,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 	pci_ers_result_t result;
 	int err;
 
-	if (pci_enable_device(pdev)) {
+	if (pci_enable_device_mem(pdev)) {
 		DPRINTK(PROBE, ERR,
 		        "Cannot re-enable PCI device after reset.\n");
 		result = PCI_ERS_RESULT_DISCONNECT;
@@ -4956,8 +5827,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 		pci_set_master(pdev);
 		pci_restore_state(pdev);
 
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_enable_wake(pdev, PCI_D3cold, 0);
+		pci_wake_from_d3(pdev, false);
 
 		ixgbe_reset(adapter);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 14e9606aa3b..453e966762f 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -44,7 +44,6 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
 static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
 static bool ixgbe_get_i2c_data(u32 *i2cctl);
 static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
-static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
 
@@ -61,8 +60,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 
 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
-			if (ixgbe_validate_phy_addr(hw, phy_addr)) {
-				hw->phy.addr = phy_addr;
+			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
 				        ixgbe_get_phy_type_from_id(hw->phy.id);
@@ -78,26 +76,6 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_validate_phy_addr - Determines phy address is valid
- *  @hw: pointer to hardware structure
- *
- **/
-static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
-{
-	u16 phy_id = 0;
-	bool valid = false;
-
-	hw->phy.addr = phy_addr;
-	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
-	                     IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
-
-	if (phy_id != 0xFFFF && phy_id != 0x0)
-		valid = true;
-
-	return valid;
-}
-
-/**
  *  ixgbe_get_phy_id - Get the phy type
  *  @hw: pointer to hardware structure
  *
@@ -108,14 +86,12 @@ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
 	u16 phy_id_high = 0;
 	u16 phy_id_low = 0;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
-	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD,
 	                              &phy_id_high);
 
 	if (status == 0) {
 		hw->phy.id = (u32)(phy_id_high << 16);
-		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
-		                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+		status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD,
 		                              &phy_id_low);
 		hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
 		hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
@@ -160,9 +136,8 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
 	 * Perform soft PHY reset to the PHY_XS.
 	 * This will cause a soft reset to the PHY
 	 */
-	return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
-	                             IXGBE_MDIO_PHY_XS_DEV_TYPE,
-	                             IXGBE_MDIO_PHY_XS_RESET);
+	return hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+				     MDIO_CTRL1_RESET);
 }
 
 /**
@@ -192,7 +167,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 		/* Setup and write the address cycle command */
 		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 		           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
-		           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		           (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 		           (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
 
 		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
@@ -223,7 +198,8 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 			 */
 			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 			           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
-			           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+			           (hw->phy.mdio.prtad <<
+				    IXGBE_MSCA_PHY_ADDR_SHIFT) |
 			           (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
 
 			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
@@ -292,7 +268,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 		/* Setup and write the address cycle command */
 		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 		           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
-		           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+		           (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 		           (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
 
 		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
@@ -323,7 +299,8 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 			 */
 			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 			           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
-			           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+			           (hw->phy.mdio.prtad <<
+				    IXGBE_MSCA_PHY_ADDR_SHIFT) |
 			           (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
 
 			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
@@ -365,7 +342,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 	s32 status = IXGBE_NOT_IMPLEMENTED;
 	u32 time_out;
 	u32 max_time_out = 10;
-	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+	u16 autoneg_reg;
 
 	/*
 	 * Set advertisement settings in PHY based on autoneg_advertised
@@ -373,36 +350,31 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 	 * tnx devices cannot be "forced" to a autoneg 10G and fail.  But can
 	 * for a 1G.
 	 */
-	hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
-	                     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+	hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, &autoneg_reg);
 
 	if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
-		autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
+		autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
 	else
-		autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
+		autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
 
-	hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
-	                      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+	hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, autoneg_reg);
 
 	/* Restart PHY autonegotiation and wait for completion */
-	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
-	                     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+	hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg);
 
-	autoneg_reg |= IXGBE_MII_RESTART;
+	autoneg_reg |= MDIO_AN_CTRL1_RESTART;
 
-	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
-	                      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+	hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg);
 
 	/* Wait for autonegotiation to finish */
 	for (time_out = 0; time_out < max_time_out; time_out++) {
 		udelay(10);
 		/* Restart PHY autonegotiation and wait for completion */
-		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
-		                              IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
 		                              &autoneg_reg);
 
-		autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
-		if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
+		autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
+		if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) {
 			status = 0;
 			break;
 		}
@@ -457,23 +429,21 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 	s32 ret_val = 0;
 	u32 i;
 
-	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
-	                     IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+	hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data);
 
 	/* reset the PHY and poll for completion */
-	hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
-	                      IXGBE_MDIO_PHY_XS_DEV_TYPE,
-	                      (phy_data | IXGBE_MDIO_PHY_XS_RESET));
+	hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+	                      (phy_data | MDIO_CTRL1_RESET));
 
 	for (i = 0; i < 100; i++) {
-		hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
-		                     IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
-		if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
+		hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+		                     &phy_data);
+		if ((phy_data & MDIO_CTRL1_RESET) == 0)
 			break;
 		msleep(10);
 	}
 
-	if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
+	if ((phy_data & MDIO_CTRL1_RESET) != 0) {
 		hw_dbg(hw, "PHY reset did not complete.\n");
 		ret_val = IXGBE_ERR_PHY;
 		goto out;
@@ -509,7 +479,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 			for (i = 0; i < edata; i++) {
 				hw->eeprom.ops.read(hw, data_offset, &eword);
 				hw->phy.ops.write_reg(hw, phy_offset,
-				                      IXGBE_TWINAX_DEV, eword);
+				                      MDIO_MMD_PMAPMD, eword);
 				hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
 				       phy_offset);
 				data_offset++;
@@ -552,18 +522,30 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 {
 	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
 	u32 vendor_oui = 0;
+	enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
 	u8 identifier = 0;
 	u8 comp_codes_1g = 0;
 	u8 comp_codes_10g = 0;
 	u8 oui_bytes[3] = {0, 0, 0};
-	u8 transmission_media = 0;
+	u8 cable_tech = 0;
 	u16 enforce_sfp = 0;
 
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
+		goto out;
+	}
+
 	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
 	                                     &identifier);
 
-	if (status == IXGBE_ERR_SFP_NOT_PRESENT) {
+	if (status == IXGBE_ERR_SFP_NOT_PRESENT || status == IXGBE_ERR_I2C) {
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
 		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		if (hw->phy.type != ixgbe_phy_nl) {
+			hw->phy.id = 0;
+			hw->phy.type = ixgbe_phy_unknown;
+		}
 		goto out;
 	}
 
@@ -572,8 +554,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		                            &comp_codes_1g);
 		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
 		                            &comp_codes_10g);
-		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA,
-		                            &transmission_media);
+		hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY,
+		                            &cable_tech);
 
 		/* ID Module
 		 * =========
@@ -586,7 +568,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		 * 6    SFP_SR/LR_CORE1 - 82599-specific
 		 */
 		if (hw->mac.type == ixgbe_mac_82598EB) {
-			if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 				hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
 			else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 				hw->phy.sfp_type = ixgbe_sfp_type_sr;
@@ -595,7 +577,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 			else
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 		} else if (hw->mac.type == ixgbe_mac_82599EB) {
-			if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
 					             ixgbe_sfp_type_da_cu_core0;
@@ -620,8 +602,19 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 		}
 
+		if (hw->phy.sfp_type != stored_sfp_type)
+			hw->phy.sfp_setup_needed = true;
+
+		/* Determine if the SFP+ PHY is dual speed or not. */
+		hw->phy.multispeed_fiber = false;
+		if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+		   (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+		   ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+		   (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+			hw->phy.multispeed_fiber = true;
+
 		/* Determine PHY vendor */
-		if (hw->phy.type == ixgbe_phy_unknown) {
+		if (hw->phy.type != ixgbe_phy_nl) {
 			hw->phy.id = identifier;
 			hw->phy.ops.read_i2c_eeprom(hw,
 			                            IXGBE_SFF_VENDOR_OUI_BYTE0,
@@ -640,8 +633,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 
 			switch (vendor_oui) {
 			case IXGBE_SFF_VENDOR_OUI_TYCO:
-				if (transmission_media &
-				    IXGBE_SFF_TWIN_AX_CAPABLE)
+				if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 					hw->phy.type = ixgbe_phy_tw_tyco;
 				break;
 			case IXGBE_SFF_VENDOR_OUI_FTL:
@@ -654,31 +646,42 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				hw->phy.type = ixgbe_phy_sfp_intel;
 				break;
 			default:
-				if (transmission_media &
-				    IXGBE_SFF_TWIN_AX_CAPABLE)
+				if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
 					hw->phy.type = ixgbe_phy_tw_unknown;
 				else
 					hw->phy.type = ixgbe_phy_sfp_unknown;
 				break;
 			}
 		}
-		if (hw->mac.type == ixgbe_mac_82598EB ||
-		    (hw->phy.sfp_type != ixgbe_sfp_type_sr &&
-		     hw->phy.sfp_type != ixgbe_sfp_type_lr &&
-		     hw->phy.sfp_type != ixgbe_sfp_type_srlr_core0 &&
-		     hw->phy.sfp_type != ixgbe_sfp_type_srlr_core1)) {
+
+		/* All passive DA cables are supported */
+		if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
+			status = 0;
+			goto out;
+		}
+
+		/* 1G SFP modules are not supported */
+		if (comp_codes_10g == 0) {
+			hw->phy.type = ixgbe_phy_sfp_unsupported;
+			status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+			goto out;
+		}
+
+		/* Anything else 82598-based is supported */
+		if (hw->mac.type == ixgbe_mac_82598EB) {
 			status = 0;
 			goto out;
 		}
 
-		hw->eeprom.ops.read(hw, IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET,
-		                    &enforce_sfp);
-		if (!(enforce_sfp & IXGBE_PHY_ALLOW_ANY_SFP)) {
+		/* This is guaranteed to be 82599, no need to check for NULL */
+		hw->mac.ops.get_device_caps(hw, &enforce_sfp);
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
 			/* Make sure we're a supported PHY type */
 			if (hw->phy.type == ixgbe_phy_sfp_intel) {
 				status = 0;
 			} else {
 				hw_dbg(hw, "SFP+ module not supported\n");
+				hw->phy.type = ixgbe_phy_sfp_unsupported;
 				status = IXGBE_ERR_SFP_NOT_SUPPORTED;
 			}
 		} else {
@@ -1279,7 +1282,7 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 		udelay(10);
 		status = hw->phy.ops.read_reg(hw,
 		                        IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
-		                        IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					MDIO_MMD_VEND1,
 		                        &phy_data);
 		phy_link = phy_data &
 		           IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
@@ -1307,8 +1310,7 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
 {
 	s32 status = 0;
 
-	status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
-	                              IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, TNX_FW_REV, MDIO_MMD_VEND1,
 	                              firmware_version);
 
 	return status;
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index cc5f1b3287e..9b700f5bf1e 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -39,11 +39,12 @@
 #define IXGBE_SFF_VENDOR_OUI_BYTE2   0x27
 #define IXGBE_SFF_1GBE_COMP_CODES    0x6
 #define IXGBE_SFF_10GBE_COMP_CODES   0x3
-#define IXGBE_SFF_TRANSMISSION_MEDIA 0x9
+#define IXGBE_SFF_CABLE_TECHNOLOGY   0x8
 
 /* Bitmasks */
-#define IXGBE_SFF_TWIN_AX_CAPABLE            0x80
+#define IXGBE_SFF_DA_PASSIVE_CABLE           0x4
 #define IXGBE_SFF_1GBASESX_CAPABLE           0x1
+#define IXGBE_SFF_1GBASELX_CAPABLE           0x2
 #define IXGBE_SFF_10GBASESR_CAPABLE          0x10
 #define IXGBE_SFF_10GBASELR_CAPABLE          0x20
 #define IXGBE_I2C_EEPROM_READ_MASK           0x100
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 030ff0a9ea6..fa87309dc08 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -29,6 +29,8 @@
 #define _IXGBE_TYPE_H_
 
 #include <linux/types.h>
+#include <linux/mdio.h>
+#include <linux/list.h>
 
 /* Vendor ID */
 #define IXGBE_INTEL_VENDOR_ID   0x8086
@@ -45,9 +47,9 @@
 #define IXGBE_DEV_ID_82598_DA_DUAL_PORT  0x10F1
 #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM      0x10E1
 #define IXGBE_DEV_ID_82598EB_XF_LR       0x10F4
-#define IXGBE_DEV_ID_82599               0x10D8
 #define IXGBE_DEV_ID_82599_KX4           0x10F7
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
+#define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
@@ -229,6 +231,34 @@
 #define IXGBE_RETA(_i)  (0x05C00 + ((_i) * 4))  /* 32 of these (0-31) */
 #define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4))  /* 10 of these (0-9) */
 
+/* Flow Director registers */
+#define IXGBE_FDIRCTRL  0x0EE00
+#define IXGBE_FDIRHKEY  0x0EE68
+#define IXGBE_FDIRSKEY  0x0EE6C
+#define IXGBE_FDIRDIP4M 0x0EE3C
+#define IXGBE_FDIRSIP4M 0x0EE40
+#define IXGBE_FDIRTCPM  0x0EE44
+#define IXGBE_FDIRUDPM  0x0EE48
+#define IXGBE_FDIRIP6M  0x0EE74
+#define IXGBE_FDIRM     0x0EE70
+
+/* Flow Director Stats registers */
+#define IXGBE_FDIRFREE  0x0EE38
+#define IXGBE_FDIRLEN   0x0EE4C
+#define IXGBE_FDIRUSTAT 0x0EE50
+#define IXGBE_FDIRFSTAT 0x0EE54
+#define IXGBE_FDIRMATCH 0x0EE58
+#define IXGBE_FDIRMISS  0x0EE5C
+
+/* Flow Director Programming registers */
+#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */
+#define IXGBE_FDIRIPSA      0x0EE18
+#define IXGBE_FDIRIPDA      0x0EE1C
+#define IXGBE_FDIRPORT      0x0EE20
+#define IXGBE_FDIRVLAN      0x0EE24
+#define IXGBE_FDIRHASH      0x0EE28
+#define IXGBE_FDIRCMD       0x0EE2C
+
 /* Transmit DMA registers */
 #define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/
 #define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
@@ -443,6 +473,21 @@
 
 #define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE    0x4
 
+/* HW RSC registers */
+#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+                          (0x0D02C + ((_i - 64) * 0x40)))
+#define IXGBE_RSCDBU      0x03028
+#define IXGBE_RSCCTL_RSCEN          0x01
+#define IXGBE_RSCCTL_MAXDESC_1      0x00
+#define IXGBE_RSCCTL_MAXDESC_4      0x04
+#define IXGBE_RSCCTL_MAXDESC_8      0x08
+#define IXGBE_RSCCTL_MAXDESC_16     0x0C
+#define IXGBE_RXDADV_RSCCNT_SHIFT     17
+#define IXGBE_GPIE_RSC_DELAY_SHIFT    11
+#define IXGBE_RXDADV_RSCCNT_MASK    0x001E0000
+#define IXGBE_RSCDBU_RSCACKDIS      0x00000080
+#define IXGBE_RDRXCTL_RSCFRSTSIZE   0x003E0000
+
 /* DCB registers */
 #define IXGBE_RTRPCS      0x02430
 #define IXGBE_RTTDCS      0x04900
@@ -462,6 +507,63 @@
 #define IXGBE_RTTDTECC_NO_BCN   0x00000100
 #define IXGBE_RTTBCNRC    0x04984
 
+/* FCoE registers */
+#define IXGBE_FCPTRL    0x02410 /* FC User Desc. PTR Low */
+#define IXGBE_FCPTRH    0x02414 /* FC USer Desc. PTR High */
+#define IXGBE_FCBUFF    0x02418 /* FC Buffer Control */
+#define IXGBE_FCDMARW   0x02420 /* FC Receive DMA RW */
+#define IXGBE_FCINVST0  0x03FC0 /* FC Invalid DMA Context Status Reg 0 */
+#define IXGBE_FCINVST(_i)       (IXGBE_FCINVST0 + ((_i) * 4))
+#define IXGBE_FCBUFF_VALID      (1 << 0)   /* DMA Context Valid */
+#define IXGBE_FCBUFF_BUFFSIZE   (3 << 3)   /* User Buffer Size */
+#define IXGBE_FCBUFF_WRCONTX    (1 << 7)   /* 0: Initiator, 1: Target */
+#define IXGBE_FCBUFF_BUFFCNT    0x0000ff00 /* Number of User Buffers */
+#define IXGBE_FCBUFF_OFFSET     0xffff0000 /* User Buffer Offset */
+#define IXGBE_FCBUFF_BUFFSIZE_SHIFT  3
+#define IXGBE_FCBUFF_BUFFCNT_SHIFT   8
+#define IXGBE_FCBUFF_OFFSET_SHIFT    16
+#define IXGBE_FCDMARW_WE        (1 << 14)   /* Write enable */
+#define IXGBE_FCDMARW_RE        (1 << 15)   /* Read enable */
+#define IXGBE_FCDMARW_FCOESEL   0x000001ff  /* FC X_ID: 11 bits */
+#define IXGBE_FCDMARW_LASTSIZE  0xffff0000  /* Last User Buffer Size */
+#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16
+
+/* FCoE SOF/EOF */
+#define IXGBE_TEOFF     0x04A94 /* Tx FC EOF */
+#define IXGBE_TSOFF     0x04A98 /* Tx FC SOF */
+#define IXGBE_REOFF     0x05158 /* Rx FC EOF */
+#define IXGBE_RSOFF     0x051F8 /* Rx FC SOF */
+/* FCoE Filter Context Registers */
+#define IXGBE_FCFLT     0x05108 /* FC FLT Context */
+#define IXGBE_FCFLTRW   0x05110 /* FC Filter RW Control */
+#define IXGBE_FCPARAM   0x051d8 /* FC Offset Parameter */
+#define IXGBE_FCFLT_VALID       (1 << 0)   /* Filter Context Valid */
+#define IXGBE_FCFLT_FIRST       (1 << 1)   /* Filter First */
+#define IXGBE_FCFLT_SEQID       0x00ff0000 /* Sequence ID */
+#define IXGBE_FCFLT_SEQCNT      0xff000000 /* Sequence Count */
+#define IXGBE_FCFLTRW_RVALDT    (1 << 13)  /* Fast Re-Validation */
+#define IXGBE_FCFLTRW_WE        (1 << 14)  /* Write Enable */
+#define IXGBE_FCFLTRW_RE        (1 << 15)  /* Read Enable */
+/* FCoE Receive Control */
+#define IXGBE_FCRXCTRL  0x05100 /* FC Receive Control */
+#define IXGBE_FCRXCTRL_FCOELLI  (1 << 0)   /* Low latency interrupt */
+#define IXGBE_FCRXCTRL_SAVBAD   (1 << 1)   /* Save Bad Frames */
+#define IXGBE_FCRXCTRL_FRSTRDH  (1 << 2)   /* EN 1st Read Header */
+#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3)   /* EN Last Header in Seq */
+#define IXGBE_FCRXCTRL_ALLH     (1 << 4)   /* EN All Headers */
+#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5)   /* EN 1st Seq. Header */
+#define IXGBE_FCRXCTRL_ICRC     (1 << 6)   /* Ignore Bad FC CRC */
+#define IXGBE_FCRXCTRL_FCCRCBO  (1 << 7)   /* FC CRC Byte Ordering */
+#define IXGBE_FCRXCTRL_FCOEVER  0x00000f00 /* FCoE Version: 4 bits */
+#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8
+/* FCoE Redirection */
+#define IXGBE_FCRECTL   0x0ED00 /* FC Redirection Control */
+#define IXGBE_FCRETA0   0x0ED10 /* FC Redirection Table 0 */
+#define IXGBE_FCRETA(_i)        (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */
+#define IXGBE_FCRECTL_ENA       0x1        /* FCoE Redir Table Enable */
+#define IXGBE_FCRETA_SIZE       8          /* Max entries in FCRETA */
+#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */
+
 /* Stats registers */
 #define IXGBE_CRCERRS   0x04000
 #define IXGBE_ILLERRC   0x04004
@@ -533,6 +635,13 @@
 #define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */
 #define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */
 #define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_FCCRC     0x05118 /* Count of Good Eth CRC w/ Bad FC CRC */
+#define IXGBE_FCOERPDC  0x0241C /* FCoE Rx Packets Dropped Count */
+#define IXGBE_FCLAST    0x02424 /* FCoE Last Error Count */
+#define IXGBE_FCOEPRC   0x02428 /* Number of FCoE Packets Received */
+#define IXGBE_FCOEDWRC  0x0242C /* Number of FCoE DWords Received */
+#define IXGBE_FCOEPTC   0x08784 /* Number of FCoE Packets Transmitted */
+#define IXGBE_FCOEDWTC  0x08788 /* Number of FCoE DWords Transmitted */
 
 /* Management */
 #define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
@@ -833,13 +942,7 @@
 /* Omer bit masks */
 #define IXGBE_CORECTL_WRITE_CMD         0x00010000
 
-/* Device Type definitions for new protocol MDIO commands */
-#define IXGBE_MDIO_PMA_PMD_DEV_TYPE               0x1
-#define IXGBE_MDIO_PCS_DEV_TYPE                   0x3
-#define IXGBE_MDIO_PHY_XS_DEV_TYPE                0x4
-#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE              0x7
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE     0x1E   /* Device 30 */
-#define IXGBE_TWINAX_DEV                          1
+/* MDIO definitions */
 
 #define IXGBE_MDIO_COMMAND_TIMEOUT     100 /* PHY Timeout for 1 GB mode */
 
@@ -850,31 +953,10 @@
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED    0x0018
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED     0x0010
 
-#define IXGBE_MDIO_AUTO_NEG_CONTROL    0x0 /* AUTO_NEG Control Reg */
-#define IXGBE_MDIO_AUTO_NEG_STATUS     0x1 /* AUTO_NEG Status Reg */
-#define IXGBE_MDIO_PHY_XS_CONTROL      0x0 /* PHY_XS Control Reg */
-#define IXGBE_MDIO_PHY_XS_RESET        0x8000 /* PHY_XS Reset */
-#define IXGBE_MDIO_PHY_ID_HIGH         0x2 /* PHY ID High Reg*/
-#define IXGBE_MDIO_PHY_ID_LOW          0x3 /* PHY ID Low Reg*/
-#define IXGBE_MDIO_PHY_SPEED_ABILITY   0x4 /* Speed Ability Reg */
-#define IXGBE_MDIO_PHY_SPEED_10G       0x0001 /* 10G capable */
-#define IXGBE_MDIO_PHY_SPEED_1G        0x0010 /* 1G capable */
-#define IXGBE_MDIO_PHY_EXT_ABILITY        0xB /* Ext Ability Reg */
-#define IXGBE_MDIO_PHY_10GBASET_ABILITY   0x0004 /* 10GBaseT capable */
-#define IXGBE_MDIO_PHY_1000BASET_ABILITY  0x0020 /* 1000BaseT capable */
-
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR     0xC30A /* PHY_XS SDA/SCL Addr Reg */
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA     0xC30B /* PHY_XS SDA/SCL Data Reg */
 #define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT     0xC30C /* PHY_XS SDA/SCL Status Reg */
 
-/* MII clause 22/28 definitions */
-#define IXGBE_MDIO_PHY_LOW_POWER_MODE  0x0800
-
-#define IXGBE_MII_SPEED_SELECTION_REG  0x10
-#define IXGBE_MII_RESTART              0x200
-#define IXGBE_MII_AUTONEG_COMPLETE     0x20
-#define IXGBE_MII_AUTONEG_REG          0x0
-
 #define IXGBE_PHY_REVISION_MASK        0xFFFFFFF0
 #define IXGBE_MAX_PHY_ADDR             32
 
@@ -898,8 +980,6 @@
 #define IXGBE_CONTROL_NL         0x000F
 #define IXGBE_CONTROL_EOL_NL     0x0FFF
 #define IXGBE_CONTROL_SOL_NL     0x0000
-#define IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET 0x002C
-#define IXGBE_PHY_ALLOW_ANY_SFP            0x1
 
 /* General purpose Interrupt Enable */
 #define IXGBE_SDP0_GPIEN         0x00000001 /* SDP0 */
@@ -958,6 +1038,8 @@
 #define IXGBE_VT_CTL_DIS_DEFPL  0x20000000 /* disable default pool */
 #define IXGBE_VT_CTL_REPLEN     0x40000000 /* replication enabled */
 #define IXGBE_VT_CTL_VT_ENABLE  0x00000001  /* Enable VT Mode */
+#define IXGBE_VT_CTL_POOL_SHIFT 7
+#define IXGBE_VT_CTL_POOL_MASK  (0x3F << IXGBE_VT_CTL_POOL_SHIFT)
 
 /* VMOLR bitmasks */
 #define IXGBE_VMOLR_AUPE        0x01000000 /* accept untagged packets */
@@ -1148,6 +1230,7 @@
 
 /* Interrupt Vector Allocation Registers */
 #define IXGBE_IVAR_REG_NUM      25
+#define IXGBE_IVAR_REG_NUM_82599       64
 #define IXGBE_IVAR_TXRX_ENTRY   96
 #define IXGBE_IVAR_RX_ENTRY     64
 #define IXGBE_IVAR_RX_QUEUE(_i)    (0 + (_i))
@@ -1163,6 +1246,7 @@
 
 /* ETYPE Queue Filter/Select Bit Masks */
 #define IXGBE_MAX_ETQF_FILTERS  8
+#define IXGBE_ETQF_FCOE         0x08000000 /* bit 27 */
 #define IXGBE_ETQF_BCN          0x10000000 /* bit 28 */
 #define IXGBE_ETQF_1588         0x40000000 /* bit 30 */
 #define IXGBE_ETQF_FILTER_EN    0x80000000 /* bit 31 */
@@ -1185,6 +1269,7 @@
  */
 #define IXGBE_ETQF_FILTER_EAPOL          0
 #define IXGBE_ETQF_FILTER_BCN            1
+#define IXGBE_ETQF_FILTER_FCOE           2
 #define IXGBE_ETQF_FILTER_1588           3
 /* VLAN Control Bit Masks */
 #define IXGBE_VLNCTRL_VET       0x0000FFFF  /* bits 0-15 */
@@ -1208,8 +1293,10 @@
 #define IXGBE_STATUS_LAN_ID_1   0x00000004 /* LAN ID 1 */
 
 /* ESDP Bit Masks */
-#define IXGBE_ESDP_SDP0 0x00000001
-#define IXGBE_ESDP_SDP1 0x00000002
+#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */
+#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */
+#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */
+#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */
 #define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */
 #define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */
 #define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */
@@ -1309,8 +1396,6 @@
 #define IXGBE_LINK_UP_TIME      90 /* 9.0 Seconds */
 #define IXGBE_AUTO_NEG_TIME     45 /* 4.5 Seconds */
 
-#define FIBER_LINK_UP_LIMIT     50
-
 /* PCS1GLSTA Bit Masks */
 #define IXGBE_PCS1GLSTA_LINK_OK         1
 #define IXGBE_PCS1GLSTA_SYNK_OK         0x10
@@ -1382,6 +1467,8 @@
 #define IXGBE_FW_PTR            0x0F
 #define IXGBE_PBANUM0_PTR       0x15
 #define IXGBE_PBANUM1_PTR       0x16
+#define IXGBE_DEVICE_CAPS       0x2C
+#define IXGBE_SAN_MAC_ADDR_PTR  0x28
 #define IXGBE_PCIE_MSIX_82599_CAPS  0x72
 #define IXGBE_PCIE_MSIX_82598_CAPS  0x62
 
@@ -1425,6 +1512,13 @@
 #define IXGBE_EERD_ATTEMPTS 100000
 #endif
 
+#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET  0x0
+#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET  0x3
+#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP  0x1
+#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS  0x2
+#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR   0x4
+#define IXGBE_FW_PATCH_VERSION_4   0x7
+
 /* PCI Bus Info */
 #define IXGBE_PCI_LINK_STATUS     0xB2
 #define IXGBE_PCI_LINK_WIDTH      0x3F0
@@ -1553,7 +1647,8 @@
 #define IXGBE_MTQC_RT_ENA       0x1 /* DCB Enable */
 #define IXGBE_MTQC_VT_ENA       0x2 /* VMDQ2 Enable */
 #define IXGBE_MTQC_64Q_1PB      0x0 /* 64 queues 1 pack buffer */
-#define IXGBE_MTQC_64VF         0x8 /* 2 TX Queues per pool w/64VF's */
+#define IXGBE_MTQC_32VF         0x8 /* 4 TX Queues per pool w/32VF's */
+#define IXGBE_MTQC_64VF         0x4 /* 2 TX Queues per pool w/64VF's */
 #define IXGBE_MTQC_8TC_8TQ      0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */
 
 /* Receive Descriptor bit definitions */
@@ -1585,6 +1680,11 @@
 #define IXGBE_RXD_ERR_IPE       0x80    /* IP Checksum Error */
 #define IXGBE_RXDADV_ERR_MASK           0xfff00000 /* RDESC.ERRORS mask */
 #define IXGBE_RXDADV_ERR_SHIFT          20         /* RDESC.ERRORS shift */
+#define IXGBE_RXDADV_ERR_FCEOFE         0x80000000 /* FCoEFe/IPE */
+#define IXGBE_RXDADV_ERR_FCERR          0x00700000 /* FCERR/FDIRERR */
+#define IXGBE_RXDADV_ERR_FDIR_LEN       0x00100000 /* FDIR Length error */
+#define IXGBE_RXDADV_ERR_FDIR_DROP      0x00200000 /* FDIR Drop error */
+#define IXGBE_RXDADV_ERR_FDIR_COLL      0x00400000 /* FDIR Collision error */
 #define IXGBE_RXDADV_ERR_HBO    0x00800000 /*Header Buffer Overflow */
 #define IXGBE_RXDADV_ERR_CE     0x01000000 /* CRC Error */
 #define IXGBE_RXDADV_ERR_LE     0x02000000 /* Length Error */
@@ -1604,12 +1704,19 @@
 #define IXGBE_RXDADV_STAT_FLM           IXGBE_RXD_STAT_FLM /* FDir Match */
 #define IXGBE_RXDADV_STAT_VP            IXGBE_RXD_STAT_VP  /* IEEE VLAN Pkt */
 #define IXGBE_RXDADV_STAT_MASK          0x000fffff /* Stat/NEXTP: bit 0-19 */
+#define IXGBE_RXDADV_STAT_FCEOFS        0x00000040 /* FCoE EOF/SOF Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT        0x00000030 /* FCoE Pkt Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
+#define IXGBE_RXDADV_STAT_FCSTAT_NODDP  0x00000010 /* 01: Ctxt w/o DDP */
+#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
+#define IXGBE_RXDADV_STAT_FCSTAT_DDP    0x00000030 /* 11: Ctxt w/ DDP */
 
 /* PSRTYPE bit definitions */
 #define IXGBE_PSRTYPE_TCPHDR    0x00000010
 #define IXGBE_PSRTYPE_UDPHDR    0x00000020
 #define IXGBE_PSRTYPE_IPV4HDR   0x00000100
 #define IXGBE_PSRTYPE_IPV6HDR   0x00000200
+#define IXGBE_PSRTYPE_L2HDR     0x00001000
 
 /* SRRCTL bit definitions */
 #define IXGBE_SRRCTL_BSIZEPKT_SHIFT     10     /* so many KBs */
@@ -1710,6 +1817,82 @@
 
 #endif
 
+enum ixgbe_fdir_pballoc_type {
+	IXGBE_FDIR_PBALLOC_64K = 0,
+	IXGBE_FDIR_PBALLOC_128K,
+	IXGBE_FDIR_PBALLOC_256K,
+};
+#define IXGBE_FDIR_PBALLOC_SIZE_SHIFT           16
+
+/* Flow Director register values */
+#define IXGBE_FDIRCTRL_PBALLOC_64K              0x00000001
+#define IXGBE_FDIRCTRL_PBALLOC_128K             0x00000002
+#define IXGBE_FDIRCTRL_PBALLOC_256K             0x00000003
+#define IXGBE_FDIRCTRL_INIT_DONE                0x00000008
+#define IXGBE_FDIRCTRL_PERFECT_MATCH            0x00000010
+#define IXGBE_FDIRCTRL_REPORT_STATUS            0x00000020
+#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS     0x00000080
+#define IXGBE_FDIRCTRL_DROP_Q_SHIFT             8
+#define IXGBE_FDIRCTRL_FLEX_SHIFT               16
+#define IXGBE_FDIRCTRL_SEARCHLIM                0x00800000
+#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT         24
+#define IXGBE_FDIRCTRL_FULL_THRESH_MASK         0xF0000000
+#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT        28
+
+#define IXGBE_FDIRTCPM_DPORTM_SHIFT             16
+#define IXGBE_FDIRUDPM_DPORTM_SHIFT             16
+#define IXGBE_FDIRIP6M_DIPM_SHIFT               16
+#define IXGBE_FDIRM_VLANID                      0x00000001
+#define IXGBE_FDIRM_VLANP                       0x00000002
+#define IXGBE_FDIRM_POOL                        0x00000004
+#define IXGBE_FDIRM_L3P                         0x00000008
+#define IXGBE_FDIRM_L4P                         0x00000010
+#define IXGBE_FDIRM_FLEX                        0x00000020
+#define IXGBE_FDIRM_DIPv6                       0x00000040
+
+#define IXGBE_FDIRFREE_FREE_MASK                0xFFFF
+#define IXGBE_FDIRFREE_FREE_SHIFT               0
+#define IXGBE_FDIRFREE_COLL_MASK                0x7FFF0000
+#define IXGBE_FDIRFREE_COLL_SHIFT               16
+#define IXGBE_FDIRLEN_MAXLEN_MASK               0x3F
+#define IXGBE_FDIRLEN_MAXLEN_SHIFT              0
+#define IXGBE_FDIRLEN_MAXHASH_MASK              0x7FFF0000
+#define IXGBE_FDIRLEN_MAXHASH_SHIFT             16
+#define IXGBE_FDIRUSTAT_ADD_MASK                0xFFFF
+#define IXGBE_FDIRUSTAT_ADD_SHIFT               0
+#define IXGBE_FDIRUSTAT_REMOVE_MASK             0xFFFF0000
+#define IXGBE_FDIRUSTAT_REMOVE_SHIFT            16
+#define IXGBE_FDIRFSTAT_FADD_MASK               0x00FF
+#define IXGBE_FDIRFSTAT_FADD_SHIFT              0
+#define IXGBE_FDIRFSTAT_FREMOVE_MASK            0xFF00
+#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT           8
+#define IXGBE_FDIRPORT_DESTINATION_SHIFT        16
+#define IXGBE_FDIRVLAN_FLEX_SHIFT               16
+#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT       15
+#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT       16
+
+#define IXGBE_FDIRCMD_CMD_MASK                  0x00000003
+#define IXGBE_FDIRCMD_CMD_ADD_FLOW              0x00000001
+#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW           0x00000002
+#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT        0x00000003
+#define IXGBE_FDIRCMD_CMD_QUERY_REM_HASH        0x00000007
+#define IXGBE_FDIRCMD_FILTER_UPDATE             0x00000008
+#define IXGBE_FDIRCMD_IPv6DMATCH                0x00000010
+#define IXGBE_FDIRCMD_L4TYPE_UDP                0x00000020
+#define IXGBE_FDIRCMD_L4TYPE_TCP                0x00000040
+#define IXGBE_FDIRCMD_L4TYPE_SCTP               0x00000060
+#define IXGBE_FDIRCMD_IPV6                      0x00000080
+#define IXGBE_FDIRCMD_CLEARHT                   0x00000100
+#define IXGBE_FDIRCMD_DROP                      0x00000200
+#define IXGBE_FDIRCMD_INT                       0x00000400
+#define IXGBE_FDIRCMD_LAST                      0x00000800
+#define IXGBE_FDIRCMD_COLLISION                 0x00001000
+#define IXGBE_FDIRCMD_QUEUE_EN                  0x00008000
+#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT            16
+#define IXGBE_FDIRCMD_VT_POOL_SHIFT             24
+#define IXGBE_FDIR_INIT_DONE_POLL               10
+#define IXGBE_FDIRCMD_CMD_POLL                  10
+
 /* Transmit Descriptor - Legacy */
 struct ixgbe_legacy_tx_desc {
 	u64 buffer_addr;       /* Address of the descriptor's data buffer */
@@ -1836,6 +2019,16 @@ struct ixgbe_adv_tx_context_desc {
 #define IXGBE_ADVTXD_POPTS_IPSEC      0x00000400 /* IPSec offload request */
 #define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */
 #define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */
+#define IXGBE_ADVTXT_TUCMD_FCOE      0x00008000       /* FCoE Frame Type */
+#define IXGBE_ADVTXD_FCOEF_EOF_MASK  (0x3 << 10)      /* FC EOF index */
+#define IXGBE_ADVTXD_FCOEF_SOF       ((1 << 2) << 10) /* FC SOF index */
+#define IXGBE_ADVTXD_FCOEF_PARINC    ((1 << 3) << 10) /* Rel_Off in F_CTL */
+#define IXGBE_ADVTXD_FCOEF_ORIE      ((1 << 4) << 10) /* Orientation: End */
+#define IXGBE_ADVTXD_FCOEF_ORIS      ((1 << 5) << 10) /* Orientation: Start */
+#define IXGBE_ADVTXD_FCOEF_EOF_N     (0x0 << 10)      /* 00: EOFn */
+#define IXGBE_ADVTXD_FCOEF_EOF_T     (0x1 << 10)      /* 01: EOFt */
+#define IXGBE_ADVTXD_FCOEF_EOF_NI    (0x2 << 10)      /* 10: EOFni */
+#define IXGBE_ADVTXD_FCOEF_EOF_A     (0x3 << 10)      /* 11: EOFa */
 #define IXGBE_ADVTXD_L4LEN_SHIFT     8  /* Adv ctxt L4LEN shift */
 #define IXGBE_ADVTXD_MSS_SHIFT       16  /* Adv ctxt MSS shift */
 
@@ -1861,7 +2054,7 @@ typedef u32 ixgbe_physical_layer;
 #define IXGBE_PHYSICAL_LAYER_UNKNOWN      0
 #define IXGBE_PHYSICAL_LAYER_10GBASE_T    0x0001
 #define IXGBE_PHYSICAL_LAYER_1000BASE_T   0x0002
-#define IXGBE_PHYSICAL_LAYER_100BASE_T    0x0004
+#define IXGBE_PHYSICAL_LAYER_100BASE_TX   0x0004
 #define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU  0x0008
 #define IXGBE_PHYSICAL_LAYER_10GBASE_LR   0x0010
 #define IXGBE_PHYSICAL_LAYER_10GBASE_LRM  0x0020
@@ -1870,6 +2063,47 @@ typedef u32 ixgbe_physical_layer;
 #define IXGBE_PHYSICAL_LAYER_10GBASE_CX4  0x0100
 #define IXGBE_PHYSICAL_LAYER_1000BASE_KX  0x0200
 #define IXGBE_PHYSICAL_LAYER_1000BASE_BX  0x0400
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KR   0x0800
+#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
+
+/* Software ATR hash keys */
+#define IXGBE_ATR_BUCKET_HASH_KEY    0xE214AD3D
+#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x14364D17
+
+/* Software ATR input stream offsets and masks */
+#define IXGBE_ATR_VLAN_OFFSET       0
+#define IXGBE_ATR_SRC_IPV6_OFFSET   2
+#define IXGBE_ATR_SRC_IPV4_OFFSET  14
+#define IXGBE_ATR_DST_IPV6_OFFSET  18
+#define IXGBE_ATR_DST_IPV4_OFFSET  30
+#define IXGBE_ATR_SRC_PORT_OFFSET  34
+#define IXGBE_ATR_DST_PORT_OFFSET  36
+#define IXGBE_ATR_FLEX_BYTE_OFFSET 38
+#define IXGBE_ATR_VM_POOL_OFFSET   40
+#define IXGBE_ATR_L4TYPE_OFFSET    41
+
+#define IXGBE_ATR_L4TYPE_MASK      0x3
+#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
+#define IXGBE_ATR_L4TYPE_UDP       0x1
+#define IXGBE_ATR_L4TYPE_TCP       0x2
+#define IXGBE_ATR_L4TYPE_SCTP      0x3
+#define IXGBE_ATR_HASH_MASK     0x7fff
+
+/* Flow Director ATR input struct. */
+struct ixgbe_atr_input {
+	/* Byte layout in order, all values with MSB first:
+	 *
+	 * vlan_id    - 2 bytes
+	 * src_ip     - 16 bytes
+	 * dst_ip     - 16 bytes
+	 * src_port   - 2 bytes
+	 * dst_port   - 2 bytes
+	 * flex_bytes - 2 bytes
+	 * vm_pool    - 1 byte
+	 * l4type     - 1 byte
+	 */
+	u8 byte_stream[42];
+};
 
 enum ixgbe_eeprom_type {
 	ixgbe_eeprom_uninitialized = 0,
@@ -1897,6 +2131,7 @@ enum ixgbe_phy_type {
 	ixgbe_phy_sfp_ftl,
 	ixgbe_phy_sfp_unknown,
 	ixgbe_phy_sfp_intel,
+	ixgbe_phy_sfp_unsupported,
 	ixgbe_phy_generic
 };
 
@@ -2005,7 +2240,8 @@ struct ixgbe_fc_info {
 	u16 pause_time; /* Flow Control Pause timer */
 	bool send_xon; /* Flow control send XON */
 	bool strict_ieee; /* Strict IEEE mode */
-	bool disable_fc_autoneg; /* Turn off autoneg FC mode */
+	bool disable_fc_autoneg; /* Do not autonegotiate FC */
+	bool fc_was_autonegged; /* Is current_mode the result of autonegging? */
 	enum ixgbe_fc_mode current_mode; /* FC mode in effect */
 	enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */
 };
@@ -2075,6 +2311,12 @@ struct ixgbe_hw_stats {
 	u64 fdirfstat_fremove;
 	u64 fdirmatch;
 	u64 fdirmiss;
+	u64 fccrc;
+	u64 fcoerpdc;
+	u64 fcoeprc;
+	u64 fcoeptc;
+	u64 fcoedwrc;
+	u64 fcoedwtc;
 };
 
 /* forward declaration */
@@ -2101,6 +2343,8 @@ struct ixgbe_mac_operations {
 	enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
 	u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
 	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
+	s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
 	s32 (*stop_adapter)(struct ixgbe_hw *);
 	s32 (*get_bus_info)(struct ixgbe_hw *);
 	void (*set_lan_id)(struct ixgbe_hw *);
@@ -2129,8 +2373,7 @@ struct ixgbe_mac_operations {
 	s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
 	s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
 	s32 (*init_rx_addrs)(struct ixgbe_hw *);
-	s32 (*update_uc_addr_list)(struct ixgbe_hw *, u8 *, u32,
-	                           ixgbe_mc_addr_itr);
+	s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct list_head *);
 	s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
 	                           ixgbe_mc_addr_itr);
 	s32 (*enable_mc)(struct ixgbe_hw *);
@@ -2140,12 +2383,13 @@ struct ixgbe_mac_operations {
 	s32 (*init_uta_tables)(struct ixgbe_hw *);
 
 	/* Flow Control */
-	s32 (*setup_fc)(struct ixgbe_hw *, s32);
+	s32 (*fc_enable)(struct ixgbe_hw *, s32);
 };
 
 struct ixgbe_phy_operations {
 	s32 (*identify)(struct ixgbe_hw *);
 	s32 (*identify_sfp)(struct ixgbe_hw *);
+	s32 (*init)(struct ixgbe_hw *);
 	s32 (*reset)(struct ixgbe_hw *);
 	s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *);
 	s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16);
@@ -2173,6 +2417,7 @@ struct ixgbe_mac_info {
 	enum ixgbe_mac_type             type;
 	u8                              addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
 	u8                              perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	u8                              san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
 	s32                             mc_filter_type;
 	u32                             mcft_size;
 	u32                             vft_size;
@@ -2185,14 +2430,16 @@ struct ixgbe_mac_info {
 	bool                            orig_link_settings_stored;
 	bool                            autoneg;
 	bool                            autoneg_succeeded;
+	bool                            autotry_restart;
 };
 
 struct ixgbe_phy_info {
 	struct ixgbe_phy_operations     ops;
+	struct mdio_if_info		mdio;
 	enum ixgbe_phy_type             type;
-	u32                             addr;
 	u32                             id;
 	enum ixgbe_sfp_type             sfp_type;
+	bool                            sfp_setup_needed;
 	u32                             revision;
 	enum ixgbe_media_type           media_type;
 	bool                            reset_disable;
@@ -2249,6 +2496,8 @@ struct ixgbe_info {
 #define IXGBE_ERR_SFP_NOT_SUPPORTED             -19
 #define IXGBE_ERR_SFP_NOT_PRESENT               -20
 #define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT       -21
+#define IXGBE_ERR_FDIR_REINIT_FAILED            -23
+#define IXGBE_ERR_EEPROM_VERSION                -24
 #define IXGBE_NOT_IMPLEMENTED                   0x7FFFFFFF
 
 #endif /* _IXGBE_TYPE_H_ */
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index d3bf2f017cc..2a0174b62e9 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -270,6 +270,18 @@ static int ixpdev_close(struct net_device *dev)
 	return 0;
 }
 
+static const struct net_device_ops ixpdev_netdev_ops = {
+	.ndo_open		= ixpdev_open,
+	.ndo_stop		= ixpdev_close,
+	.ndo_start_xmit		= ixpdev_xmit,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ixpdev_poll_controller,
+#endif
+};
+
 struct net_device *ixpdev_alloc(int channel, int sizeof_priv)
 {
 	struct net_device *dev;
@@ -279,12 +291,7 @@ struct net_device *ixpdev_alloc(int channel, int sizeof_priv)
 	if (dev == NULL)
 		return NULL;
 
-	dev->hard_start_xmit = ixpdev_xmit;
-	dev->open = ixpdev_open;
-	dev->stop = ixpdev_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ixpdev_poll_controller;
-#endif
+	dev->netdev_ops = &ixpdev_netdev_ops;
 
 	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
 
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index 14248cfc3df..d12106b47bf 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -96,6 +96,18 @@ static int jazzsonic_close(struct net_device* dev)
 	return err;
 }
 
+static const struct net_device_ops sonic_netdev_ops = {
+	.ndo_open		= jazzsonic_open,
+	.ndo_stop		= jazzsonic_close,
+	.ndo_start_xmit		= sonic_send_packet,
+	.ndo_get_stats		= sonic_get_stats,
+	.ndo_set_multicast_list	= sonic_multicast_list,
+	.ndo_tx_timeout		= sonic_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __init sonic_probe1(struct net_device *dev)
 {
 	static unsigned version_printed;
@@ -179,12 +191,7 @@ static int __init sonic_probe1(struct net_device *dev)
 	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
 	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
 
-	dev->open = jazzsonic_open;
-	dev->stop = jazzsonic_close;
-	dev->hard_start_xmit = sonic_send_packet;
-	dev->get_stats = sonic_get_stats;
-	dev->set_multicast_list = &sonic_multicast_list;
-	dev->tx_timeout = sonic_tx_timeout;
+	dev->netdev_ops = &sonic_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	/*
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 621a7c0c46b..1e3c63d67b9 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -1939,7 +1939,6 @@ jme_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 				TXCS_SELECT_QUEUE0 |
 				TXCS_QUEUE0S |
 				TXCS_ENABLE);
-	netdev->trans_start = jiffies;
 
 	tx_dbg(jme, "xmit: %d+%d@%lu\n", idx,
 			skb_shinfo(skb)->nr_frags + 2,
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 38d6649a29c..b4cf602c32b 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -133,6 +133,7 @@ struct korina_private {
 	int dma_halt_cnt;
 	int dma_run_cnt;
 	struct napi_struct napi;
+	struct timer_list media_check_timer;
 	struct mii_if_info mii_if;
 	struct net_device *dev;
 	int phy_addr;
@@ -664,6 +665,15 @@ static void korina_check_media(struct net_device *dev, unsigned int init_media)
 						&lp->eth_regs->ethmac2);
 }
 
+static void korina_poll_media(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *) data;
+	struct korina_private *lp = netdev_priv(dev);
+
+	korina_check_media(dev, 0);
+	mod_timer(&lp->media_check_timer, jiffies + HZ);
+}
+
 static void korina_set_carrier(struct mii_if_info *mii)
 {
 	if (mii->force_media) {
@@ -1034,6 +1044,7 @@ static int korina_open(struct net_device *dev)
 		    dev->name, lp->und_irq);
 		goto err_free_ovr_irq;
 	}
+	mod_timer(&lp->media_check_timer, jiffies + 1);
 out:
 	return ret;
 
@@ -1053,6 +1064,8 @@ static int korina_close(struct net_device *dev)
 	struct korina_private *lp = netdev_priv(dev);
 	u32 tmp;
 
+	del_timer(&lp->media_check_timer);
+
 	/* Disable interrupts */
 	disable_irq(lp->rx_irq);
 	disable_irq(lp->tx_irq);
@@ -1081,6 +1094,21 @@ static int korina_close(struct net_device *dev)
 	return 0;
 }
 
+static const struct net_device_ops korina_netdev_ops = {
+	.ndo_open		= korina_open,
+	.ndo_stop		= korina_close,
+	.ndo_start_xmit		= korina_send_packet,
+	.ndo_set_multicast_list	= korina_multicast_list,
+	.ndo_tx_timeout		= korina_tx_timeout,
+	.ndo_do_ioctl		= korina_ioctl,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= korina_poll_controller,
+#endif
+};
+
 static int korina_probe(struct platform_device *pdev)
 {
 	struct korina_device *bif = platform_get_drvdata(pdev);
@@ -1149,17 +1177,9 @@ static int korina_probe(struct platform_device *pdev)
 	dev->irq = lp->rx_irq;
 	lp->dev = dev;
 
-	dev->open = korina_open;
-	dev->stop = korina_close;
-	dev->hard_start_xmit = korina_send_packet;
-	dev->set_multicast_list = &korina_multicast_list;
+	dev->netdev_ops = &korina_netdev_ops;
 	dev->ethtool_ops = &netdev_ethtool_ops;
-	dev->tx_timeout = korina_tx_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->do_ioctl = &korina_ioctl;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = korina_poll_controller;
-#endif
 	netif_napi_add(dev, &lp->napi, korina_poll, 64);
 
 	lp->phy_addr = (((lp->rx_irq == 0x2c? 1:0) << 8) | 0x05);
@@ -1176,6 +1196,7 @@ static int korina_probe(struct platform_device *pdev)
 			": cannot register net device %d\n", rc);
 		goto probe_err_register;
 	}
+	setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
 out:
 	return rc;
 
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
new file mode 100644
index 00000000000..39b0aea2aab
--- /dev/null
+++ b/drivers/net/ks8842.c
@@ -0,0 +1,732 @@
+/*
+ * ks8842_main.c timberdale KS8842 ethernet driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * The Micrel KS8842 behind the timberdale FPGA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+
+#define DRV_NAME "ks8842"
+
+/* Timberdale specific Registers */
+#define REG_TIMB_RST	0x1c
+
+/* KS8842 registers */
+
+#define REG_SELECT_BANK 0x0e
+
+/* bank 0 registers */
+#define REG_QRFCR	0x04
+
+/* bank 2 registers */
+#define REG_MARL	0x00
+#define REG_MARM	0x02
+#define REG_MARH	0x04
+
+/* bank 3 registers */
+#define REG_GRR		0x06
+
+/* bank 16 registers */
+#define REG_TXCR	0x00
+#define REG_TXSR	0x02
+#define REG_RXCR	0x04
+#define REG_TXMIR	0x08
+#define REG_RXMIR	0x0A
+
+/* bank 17 registers */
+#define REG_TXQCR	0x00
+#define REG_RXQCR	0x02
+#define REG_TXFDPR	0x04
+#define REG_RXFDPR	0x06
+#define REG_QMU_DATA_LO 0x08
+#define REG_QMU_DATA_HI 0x0A
+
+/* bank 18 registers */
+#define REG_IER		0x00
+#define IRQ_LINK_CHANGE	0x8000
+#define IRQ_TX		0x4000
+#define IRQ_RX		0x2000
+#define IRQ_RX_OVERRUN	0x0800
+#define IRQ_TX_STOPPED	0x0200
+#define IRQ_RX_STOPPED	0x0100
+#define IRQ_RX_ERROR	0x0080
+#define ENABLED_IRQS	(IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \
+		IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
+#define REG_ISR		0x02
+#define REG_RXSR	0x04
+#define RXSR_VALID	0x8000
+#define RXSR_BROADCAST	0x80
+#define RXSR_MULTICAST	0x40
+#define RXSR_UNICAST	0x20
+#define RXSR_FRAMETYPE	0x08
+#define RXSR_TOO_LONG	0x04
+#define RXSR_RUNT	0x02
+#define RXSR_CRC_ERROR	0x01
+#define RXSR_ERROR	(RXSR_TOO_LONG | RXSR_RUNT | RXSR_CRC_ERROR)
+
+/* bank 32 registers */
+#define REG_SW_ID_AND_ENABLE	0x00
+#define REG_SGCR1		0x02
+#define REG_SGCR2		0x04
+#define REG_SGCR3		0x06
+
+/* bank 39 registers */
+#define REG_MACAR1		0x00
+#define REG_MACAR2		0x02
+#define REG_MACAR3		0x04
+
+/* bank 45 registers */
+#define REG_P1MBCR		0x00
+#define REG_P1MBSR		0x02
+
+/* bank 46 registers */
+#define REG_P2MBCR		0x00
+#define REG_P2MBSR		0x02
+
+/* bank 48 registers */
+#define REG_P1CR2		0x02
+
+/* bank 49 registers */
+#define REG_P1CR4		0x02
+#define REG_P1SR		0x04
+
+struct ks8842_adapter {
+	void __iomem	*hw_addr;
+	int		irq;
+	struct tasklet_struct	tasklet;
+	spinlock_t	lock; /* spinlock to be interrupt safe */
+	struct platform_device *pdev;
+};
+
+static inline void ks8842_select_bank(struct ks8842_adapter *adapter, u16 bank)
+{
+	iowrite16(bank, adapter->hw_addr + REG_SELECT_BANK);
+}
+
+static inline void ks8842_write8(struct ks8842_adapter *adapter, u16 bank,
+	u8 value, int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	iowrite8(value, adapter->hw_addr + offset);
+}
+
+static inline void ks8842_write16(struct ks8842_adapter *adapter, u16 bank,
+	u16 value, int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	iowrite16(value, adapter->hw_addr + offset);
+}
+
+static inline void ks8842_enable_bits(struct ks8842_adapter *adapter, u16 bank,
+	u16 bits, int offset)
+{
+	u16 reg;
+	ks8842_select_bank(adapter, bank);
+	reg = ioread16(adapter->hw_addr + offset);
+	reg |= bits;
+	iowrite16(reg, adapter->hw_addr + offset);
+}
+
+static inline void ks8842_clear_bits(struct ks8842_adapter *adapter, u16 bank,
+	u16 bits, int offset)
+{
+	u16 reg;
+	ks8842_select_bank(adapter, bank);
+	reg = ioread16(adapter->hw_addr + offset);
+	reg &= ~bits;
+	iowrite16(reg, adapter->hw_addr + offset);
+}
+
+static inline void ks8842_write32(struct ks8842_adapter *adapter, u16 bank,
+	u32 value, int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	iowrite32(value, adapter->hw_addr + offset);
+}
+
+static inline u8 ks8842_read8(struct ks8842_adapter *adapter, u16 bank,
+	int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	return ioread8(adapter->hw_addr + offset);
+}
+
+static inline u16 ks8842_read16(struct ks8842_adapter *adapter, u16 bank,
+	int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	return ioread16(adapter->hw_addr + offset);
+}
+
+static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank,
+	int offset)
+{
+	ks8842_select_bank(adapter, bank);
+	return ioread32(adapter->hw_addr + offset);
+}
+
+static void ks8842_reset(struct ks8842_adapter *adapter)
+{
+	/* The KS8842 goes haywire when doing softare reset
+	 * a work around in the timberdale IP is implemented to
+	 * do a hardware reset instead
+	ks8842_write16(adapter, 3, 1, REG_GRR);
+	msleep(10);
+	iowrite16(0, adapter->hw_addr + REG_GRR);
+	*/
+	iowrite16(32, adapter->hw_addr + REG_SELECT_BANK);
+	iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
+	msleep(20);
+}
+
+static void ks8842_update_link_status(struct net_device *netdev,
+	struct ks8842_adapter *adapter)
+{
+	/* check the status of the link */
+	if (ks8842_read16(adapter, 45, REG_P1MBSR) & 0x4) {
+		netif_carrier_on(netdev);
+		netif_wake_queue(netdev);
+	} else {
+		netif_stop_queue(netdev);
+		netif_carrier_off(netdev);
+	}
+}
+
+static void ks8842_enable_tx(struct ks8842_adapter *adapter)
+{
+	ks8842_enable_bits(adapter, 16, 0x01, REG_TXCR);
+}
+
+static void ks8842_disable_tx(struct ks8842_adapter *adapter)
+{
+	ks8842_clear_bits(adapter, 16, 0x01, REG_TXCR);
+}
+
+static void ks8842_enable_rx(struct ks8842_adapter *adapter)
+{
+	ks8842_enable_bits(adapter, 16, 0x01, REG_RXCR);
+}
+
+static void ks8842_disable_rx(struct ks8842_adapter *adapter)
+{
+	ks8842_clear_bits(adapter, 16, 0x01, REG_RXCR);
+}
+
+static void ks8842_reset_hw(struct ks8842_adapter *adapter)
+{
+	/* reset the HW */
+	ks8842_reset(adapter);
+
+	/* Enable QMU Transmit flow control / transmit padding / Transmit CRC */
+	ks8842_write16(adapter, 16, 0x000E, REG_TXCR);
+
+	/* enable the receiver, uni + multi + broadcast + flow ctrl
+		+ crc strip */
+	ks8842_write16(adapter, 16, 0x8 | 0x20 | 0x40 | 0x80 | 0x400,
+		REG_RXCR);
+
+	/* TX frame pointer autoincrement */
+	ks8842_write16(adapter, 17, 0x4000, REG_TXFDPR);
+
+	/* RX frame pointer autoincrement */
+	ks8842_write16(adapter, 17, 0x4000, REG_RXFDPR);
+
+	/* RX 2 kb high watermark */
+	ks8842_write16(adapter, 0, 0x1000, REG_QRFCR);
+
+	/* aggresive back off in half duplex */
+	ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);
+
+	/* enable no excessive collison drop */
+	ks8842_enable_bits(adapter, 32, 1 << 3, REG_SGCR2);
+
+	/* Enable port 1 force flow control / back pressure / transmit / recv */
+	ks8842_write16(adapter, 48, 0x1E07, REG_P1CR2);
+
+	/* restart port auto-negotiation */
+	ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4);
+	/* only advertise 10Mbps */
+	ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4);
+
+	/* Enable the transmitter */
+	ks8842_enable_tx(adapter);
+
+	/* Enable the receiver */
+	ks8842_enable_rx(adapter);
+
+	/* clear all interrupts */
+	ks8842_write16(adapter, 18, 0xffff, REG_ISR);
+
+	/* enable interrupts */
+	ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
+
+	/* enable the switch */
+	ks8842_write16(adapter, 32, 0x1, REG_SW_ID_AND_ENABLE);
+}
+
+static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest)
+{
+	int i;
+	u16 mac;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i);
+
+	/* make sure the switch port uses the same MAC as the QMU */
+	mac = ks8842_read16(adapter, 2, REG_MARL);
+	ks8842_write16(adapter, 39, mac, REG_MACAR1);
+	mac = ks8842_read16(adapter, 2, REG_MARM);
+	ks8842_write16(adapter, 39, mac, REG_MACAR2);
+	mac = ks8842_read16(adapter, 2, REG_MARH);
+	ks8842_write16(adapter, 39, mac, REG_MACAR3);
+}
+
+static inline u16 ks8842_tx_fifo_space(struct ks8842_adapter *adapter)
+{
+	return ks8842_read16(adapter, 16, REG_TXMIR) & 0x1fff;
+}
+
+static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	int len = skb->len;
+	u32 *ptr = (u32 *)skb->data;
+	u32 ctrl;
+
+	dev_dbg(&adapter->pdev->dev,
+		"%s: len %u head %p data %p tail %p end %p\n",
+		__func__, skb->len, skb->head, skb->data,
+		skb_tail_pointer(skb), skb_end_pointer(skb));
+
+	/* check FIFO buffer space, we need space for CRC and command bits */
+	if (ks8842_tx_fifo_space(adapter) < len + 8)
+		return NETDEV_TX_BUSY;
+
+	/* the control word, enable IRQ, port 1 and the length */
+	ctrl = 0x8000 | 0x100 | (len << 16);
+	ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
+
+	netdev->stats.tx_bytes += len;
+
+	/* copy buffer */
+	while (len > 0) {
+		iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
+		len -= sizeof(u32);
+		ptr++;
+	}
+
+	/* enqueue packet */
+	ks8842_write16(adapter, 17, 1, REG_TXQCR);
+
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static void ks8842_rx_frame(struct net_device *netdev,
+	struct ks8842_adapter *adapter)
+{
+	u32 status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
+	int len = (status >> 16) & 0x7ff;
+
+	status &= 0xffff;
+
+	dev_dbg(&adapter->pdev->dev, "%s - rx_data: status: %x\n",
+		__func__, status);
+
+	/* check the status */
+	if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
+		struct sk_buff *skb = netdev_alloc_skb(netdev, len + 2);
+
+		dev_dbg(&adapter->pdev->dev, "%s, got package, len: %d\n",
+			__func__, len);
+		if (skb) {
+			u32 *data;
+
+			netdev->stats.rx_packets++;
+			netdev->stats.rx_bytes += len;
+			if (status & RXSR_MULTICAST)
+				netdev->stats.multicast++;
+
+			/* Align socket buffer in 4-byte boundary for
+				 better performance. */
+			skb_reserve(skb, 2);
+			data = (u32 *)skb_put(skb, len);
+
+			ks8842_select_bank(adapter, 17);
+			while (len > 0) {
+				*data++ = ioread32(adapter->hw_addr +
+					REG_QMU_DATA_LO);
+				len -= sizeof(u32);
+			}
+
+			skb->protocol = eth_type_trans(skb, netdev);
+			netif_rx(skb);
+		} else
+			netdev->stats.rx_dropped++;
+	} else {
+		dev_dbg(&adapter->pdev->dev, "RX error, status: %x\n", status);
+		netdev->stats.rx_errors++;
+		if (status & RXSR_TOO_LONG)
+			netdev->stats.rx_length_errors++;
+		if (status & RXSR_CRC_ERROR)
+			netdev->stats.rx_crc_errors++;
+		if (status & RXSR_RUNT)
+			netdev->stats.rx_frame_errors++;
+	}
+
+	/* set high watermark to 3K */
+	ks8842_clear_bits(adapter, 0, 1 << 12, REG_QRFCR);
+
+	/* release the frame */
+	ks8842_write16(adapter, 17, 0x01, REG_RXQCR);
+
+	/* set high watermark to 2K */
+	ks8842_enable_bits(adapter, 0, 1 << 12, REG_QRFCR);
+}
+
+void ks8842_handle_rx(struct net_device *netdev, struct ks8842_adapter *adapter)
+{
+	u16 rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
+	dev_dbg(&adapter->pdev->dev, "%s Entry - rx_data: %d\n",
+		__func__, rx_data);
+	while (rx_data) {
+		ks8842_rx_frame(netdev, adapter);
+		rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
+	}
+}
+
+void ks8842_handle_tx(struct net_device *netdev, struct ks8842_adapter *adapter)
+{
+	u16 sr = ks8842_read16(adapter, 16, REG_TXSR);
+	dev_dbg(&adapter->pdev->dev, "%s - entry, sr: %x\n", __func__, sr);
+	netdev->stats.tx_packets++;
+	if (netif_queue_stopped(netdev))
+		netif_wake_queue(netdev);
+}
+
+void ks8842_handle_rx_overrun(struct net_device *netdev,
+	struct ks8842_adapter *adapter)
+{
+	dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__);
+	netdev->stats.rx_errors++;
+	netdev->stats.rx_fifo_errors++;
+}
+
+void ks8842_tasklet(unsigned long arg)
+{
+	struct net_device *netdev = (struct net_device *)arg;
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	u16 isr;
+	unsigned long flags;
+	u16 entry_bank;
+
+	/* read current bank to be able to set it back */
+	spin_lock_irqsave(&adapter->lock, flags);
+	entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
+	spin_unlock_irqrestore(&adapter->lock, flags);
+
+	isr = ks8842_read16(adapter, 18, REG_ISR);
+	dev_dbg(&adapter->pdev->dev, "%s - ISR: 0x%x\n", __func__, isr);
+
+	/* Ack */
+	ks8842_write16(adapter, 18, isr, REG_ISR);
+
+	if (!netif_running(netdev))
+		return;
+
+	if (isr & IRQ_LINK_CHANGE)
+		ks8842_update_link_status(netdev, adapter);
+
+	if (isr & (IRQ_RX | IRQ_RX_ERROR))
+		ks8842_handle_rx(netdev, adapter);
+
+	if (isr & IRQ_TX)
+		ks8842_handle_tx(netdev, adapter);
+
+	if (isr & IRQ_RX_OVERRUN)
+		ks8842_handle_rx_overrun(netdev, adapter);
+
+	if (isr & IRQ_TX_STOPPED) {
+		ks8842_disable_tx(adapter);
+		ks8842_enable_tx(adapter);
+	}
+
+	if (isr & IRQ_RX_STOPPED) {
+		ks8842_disable_rx(adapter);
+		ks8842_enable_rx(adapter);
+	}
+
+	/* re-enable interrupts, put back the bank selection register */
+	spin_lock_irqsave(&adapter->lock, flags);
+	ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
+	iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
+	spin_unlock_irqrestore(&adapter->lock, flags);
+}
+
+static irqreturn_t ks8842_irq(int irq, void *devid)
+{
+	struct ks8842_adapter *adapter = devid;
+	u16 isr;
+	u16 entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
+	irqreturn_t ret = IRQ_NONE;
+
+	isr = ks8842_read16(adapter, 18, REG_ISR);
+	dev_dbg(&adapter->pdev->dev, "%s - ISR: 0x%x\n", __func__, isr);
+
+	if (isr) {
+		/* disable IRQ */
+		ks8842_write16(adapter, 18, 0x00, REG_IER);
+
+		/* schedule tasklet */
+		tasklet_schedule(&adapter->tasklet);
+
+		ret = IRQ_HANDLED;
+	}
+
+	iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
+
+	return ret;
+}
+
+
+/* Netdevice operations */
+
+static int ks8842_open(struct net_device *netdev)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	int err;
+
+	dev_dbg(&adapter->pdev->dev, "%s - entry\n", __func__);
+
+	/* reset the HW */
+	ks8842_reset_hw(adapter);
+
+	ks8842_update_link_status(netdev, adapter);
+
+	err = request_irq(adapter->irq, ks8842_irq, IRQF_SHARED, DRV_NAME,
+		adapter);
+	if (err) {
+		printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
+			adapter->irq, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int ks8842_close(struct net_device *netdev)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+
+	dev_dbg(&adapter->pdev->dev, "%s - entry\n", __func__);
+
+	/* free the irq */
+	free_irq(adapter->irq, adapter);
+
+	/* disable the switch */
+	ks8842_write16(adapter, 32, 0x0, REG_SW_ID_AND_ENABLE);
+
+	return 0;
+}
+
+static int ks8842_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	int ret;
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+
+	dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__);
+
+	ret = ks8842_tx_frame(skb, netdev);
+
+	if (ks8842_tx_fifo_space(adapter) <  netdev->mtu + 8)
+		netif_stop_queue(netdev);
+
+	return ret;
+}
+
+static int ks8842_set_mac(struct net_device *netdev, void *p)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	unsigned long flags;
+	struct sockaddr *addr = p;
+	char *mac = (u8 *)addr->sa_data;
+	int i;
+
+	dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__);
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(netdev->dev_addr, mac, netdev->addr_len);
+
+	spin_lock_irqsave(&adapter->lock, flags);
+	for (i = 0; i < ETH_ALEN; i++) {
+		ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i);
+		ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
+			REG_MACAR1 + i);
+	}
+	spin_unlock_irqrestore(&adapter->lock, flags);
+	return 0;
+}
+
+static void ks8842_tx_timeout(struct net_device *netdev)
+{
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	unsigned long flags;
+
+	dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__);
+
+	spin_lock_irqsave(&adapter->lock, flags);
+	/* disable interrupts */
+	ks8842_write16(adapter, 18, 0, REG_IER);
+	ks8842_write16(adapter, 18, 0xFFFF, REG_ISR);
+	spin_unlock_irqrestore(&adapter->lock, flags);
+
+	ks8842_reset_hw(adapter);
+
+	ks8842_update_link_status(netdev, adapter);
+}
+
+static const struct net_device_ops ks8842_netdev_ops = {
+	.ndo_open		= ks8842_open,
+	.ndo_stop		= ks8842_close,
+	.ndo_start_xmit		= ks8842_xmit_frame,
+	.ndo_set_mac_address	= ks8842_set_mac,
+	.ndo_tx_timeout 	= ks8842_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr
+};
+
+static struct ethtool_ops ks8842_ethtool_ops = {
+	.get_link		= ethtool_op_get_link,
+};
+
+static int __devinit ks8842_probe(struct platform_device *pdev)
+{
+	int err = -ENOMEM;
+	struct resource *iomem;
+	struct net_device *netdev;
+	struct ks8842_adapter *adapter;
+	u16 id;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
+		goto err_mem_region;
+
+	netdev = alloc_etherdev(sizeof(struct ks8842_adapter));
+	if (!netdev)
+		goto err_alloc_etherdev;
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	adapter = netdev_priv(netdev);
+	adapter->hw_addr = ioremap(iomem->start, resource_size(iomem));
+	if (!adapter->hw_addr)
+		goto err_ioremap;
+
+	adapter->irq = platform_get_irq(pdev, 0);
+	if (adapter->irq < 0) {
+		err = adapter->irq;
+		goto err_get_irq;
+	}
+
+	adapter->pdev = pdev;
+
+	tasklet_init(&adapter->tasklet, ks8842_tasklet, (unsigned long)netdev);
+	spin_lock_init(&adapter->lock);
+
+	netdev->netdev_ops = &ks8842_netdev_ops;
+	netdev->ethtool_ops = &ks8842_ethtool_ops;
+
+	ks8842_read_mac_addr(adapter, netdev->dev_addr);
+
+	id = ks8842_read16(adapter, 32, REG_SW_ID_AND_ENABLE);
+
+	strcpy(netdev->name, "eth%d");
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	platform_set_drvdata(pdev, netdev);
+
+	printk(KERN_INFO DRV_NAME
+		" Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
+		(id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);
+
+	return 0;
+
+err_register:
+err_get_irq:
+	iounmap(adapter->hw_addr);
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	release_mem_region(iomem->start, resource_size(iomem));
+err_mem_region:
+	return err;
+}
+
+static int __devexit ks8842_remove(struct platform_device *pdev)
+{
+	struct net_device *netdev = platform_get_drvdata(pdev);
+	struct ks8842_adapter *adapter = netdev_priv(netdev);
+	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	unregister_netdev(netdev);
+	tasklet_kill(&adapter->tasklet);
+	iounmap(adapter->hw_addr);
+	free_netdev(netdev);
+	release_mem_region(iomem->start, resource_size(iomem));
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+
+static struct platform_driver ks8842_platform_driver = {
+	.driver = {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ks8842_probe,
+	.remove		= ks8842_remove,
+};
+
+static int __init ks8842_init(void)
+{
+	return platform_driver_register(&ks8842_platform_driver);
+}
+
+static void __exit ks8842_exit(void)
+{
+	platform_driver_unregister(&ks8842_platform_driver);
+}
+
+module_init(ks8842_init);
+module_exit(ks8842_exit);
+
+MODULE_DESCRIPTION("Timberdale KS8842 ethernet driver");
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ks8842");
+
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index efbae4b8398..a0c578585a5 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -161,12 +161,12 @@ lan_init_chip(struct parisc_device *dev)
 
 	if (!dev->irq) {
 		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
-			__FILE__, dev->hpa.start);
+			__FILE__, (unsigned long)dev->hpa.start);
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start,
-			dev->irq);
+	printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n",
+			(unsigned long)dev->hpa.start, dev->irq);
 
 	netdevice = alloc_etherdev(sizeof(struct i596_private));
 	if (!netdevice)
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 7415f517491..070fa450087 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -1036,6 +1036,19 @@ static void print_eth(unsigned char *add, char *str)
 	printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
 	       add, add + 6, add, add[12], add[13], str);
 }
+static const struct net_device_ops i596_netdev_ops = {
+	.ndo_open		= i596_open,
+	.ndo_stop		= i596_close,
+	.ndo_start_xmit		= i596_start_xmit,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_tx_timeout		= i596_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= i596_poll_controller,
+#endif
+};
 
 static int __devinit i82596_probe(struct net_device *dev)
 {
@@ -1062,16 +1075,8 @@ static int __devinit i82596_probe(struct net_device *dev)
 		return -ENOMEM;
 	}
 
-	/* The 82596-specific entries in the device structure. */
-	dev->open = i596_open;
-	dev->stop = i596_close;
-	dev->hard_start_xmit = i596_start_xmit;
-	dev->set_multicast_list = set_multicast_list;
-	dev->tx_timeout = i596_tx_timeout;
+	dev->netdev_ops = &i596_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = i596_poll_controller;
-#endif
 
 	memset(dma, 0, sizeof(struct i596_dma));
 	lp->dma = dma;
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index 789b6cb744b..f28c2334300 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -370,7 +370,7 @@ static int __ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		spin_unlock(&ei_local->page_lock);
 		enable_irq_lockdep_irqrestore(dev->irq, &flags);
 		dev->stats.tx_errors++;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/*
diff --git a/drivers/net/ll_temac.h b/drivers/net/ll_temac.h
new file mode 100644
index 00000000000..1af66a1e691
--- /dev/null
+++ b/drivers/net/ll_temac.h
@@ -0,0 +1,374 @@
+
+#ifndef XILINX_LL_TEMAC_H
+#define XILINX_LL_TEMAC_H
+
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+
+/* packet size info */
+#define XTE_HDR_SIZE			14      /* size of Ethernet header */
+#define XTE_TRL_SIZE			4       /* size of Ethernet trailer (FCS) */
+#define XTE_JUMBO_MTU			9000
+#define XTE_MAX_JUMBO_FRAME_SIZE	(XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
+
+/*  Configuration options */
+
+/*  Accept all incoming packets.
+ *  This option defaults to disabled (cleared) */
+#define XTE_OPTION_PROMISC                      (1 << 0)
+/*  Jumbo frame support for Tx & Rx.
+ *  This option defaults to disabled (cleared) */
+#define XTE_OPTION_JUMBO                        (1 << 1)
+/*  VLAN Rx & Tx frame support.
+ *  This option defaults to disabled (cleared) */
+#define XTE_OPTION_VLAN                         (1 << 2)
+/*  Enable recognition of flow control frames on Rx
+ *  This option defaults to enabled (set) */
+#define XTE_OPTION_FLOW_CONTROL                 (1 << 4)
+/*  Strip FCS and PAD from incoming frames.
+ *  Note: PAD from VLAN frames is not stripped.
+ *  This option defaults to disabled (set) */
+#define XTE_OPTION_FCS_STRIP                    (1 << 5)
+/*  Generate FCS field and add PAD automatically for outgoing frames.
+ *  This option defaults to enabled (set) */
+#define XTE_OPTION_FCS_INSERT                   (1 << 6)
+/*  Enable Length/Type error checking for incoming frames. When this option is
+set, the MAC will filter frames that have a mismatched type/length field
+and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
+types of frames are encountered. When this option is cleared, the MAC will
+allow these types of frames to be received.
+This option defaults to enabled (set) */
+#define XTE_OPTION_LENTYPE_ERR                  (1 << 7)
+/*  Enable the transmitter.
+ *  This option defaults to enabled (set) */
+#define XTE_OPTION_TXEN                         (1 << 11)
+/*  Enable the receiver
+*   This option defaults to enabled (set) */
+#define XTE_OPTION_RXEN                         (1 << 12)
+
+/*  Default options set when device is initialized or reset */
+#define XTE_OPTION_DEFAULTS                     \
+	(XTE_OPTION_TXEN |                          \
+	 XTE_OPTION_FLOW_CONTROL |                  \
+	 XTE_OPTION_RXEN)
+
+/* XPS_LL_TEMAC SDMA registers definition */
+
+#define TX_NXTDESC_PTR      0x00            /* r */
+#define TX_CURBUF_ADDR      0x01            /* r */
+#define TX_CURBUF_LENGTH    0x02            /* r */
+#define TX_CURDESC_PTR      0x03            /* rw */
+#define TX_TAILDESC_PTR     0x04            /* rw */
+#define TX_CHNL_CTRL        0x05            /* rw */
+/*
+ 0:7      24:31       IRQTimeout
+ 8:15     16:23       IRQCount
+ 16:20    11:15       Reserved
+ 21       10          0
+ 22       9           UseIntOnEnd
+ 23       8           LdIRQCnt
+ 24       7           IRQEn
+ 25:28    3:6         Reserved
+ 29       2           IrqErrEn
+ 30       1           IrqDlyEn
+ 31       0           IrqCoalEn
+*/
+#define CHNL_CTRL_IRQ_IOE       (1 << 9)
+#define CHNL_CTRL_IRQ_EN        (1 << 7)
+#define CHNL_CTRL_IRQ_ERR_EN    (1 << 2)
+#define CHNL_CTRL_IRQ_DLY_EN    (1 << 1)
+#define CHNL_CTRL_IRQ_COAL_EN   (1 << 0)
+#define TX_IRQ_REG          0x06            /* rw */
+/*
+  0:7      24:31       DltTmrValue
+ 8:15     16:23       ClscCntrValue
+ 16:17    14:15       Reserved
+ 18:21    10:13       ClscCnt
+ 22:23    8:9         DlyCnt
+ 24:28    3::7        Reserved
+ 29       2           ErrIrq
+ 30       1           DlyIrq
+ 31       0           CoalIrq
+ */
+#define TX_CHNL_STS         0x07            /* r */
+/*
+   0:9      22:31   Reserved
+ 10       21      TailPErr
+ 11       20      CmpErr
+ 12       19      AddrErr
+ 13       18      NxtPErr
+ 14       17      CurPErr
+ 15       16      BsyWr
+ 16:23    8:15    Reserved
+ 24       7       Error
+ 25       6       IOE
+ 26       5       SOE
+ 27       4       Cmplt
+ 28       3       SOP
+ 29       2       EOP
+ 30       1       EngBusy
+ 31       0       Reserved
+*/
+
+#define RX_NXTDESC_PTR      0x08            /* r */
+#define RX_CURBUF_ADDR      0x09            /* r */
+#define RX_CURBUF_LENGTH    0x0a            /* r */
+#define RX_CURDESC_PTR      0x0b            /* rw */
+#define RX_TAILDESC_PTR     0x0c            /* rw */
+#define RX_CHNL_CTRL        0x0d            /* rw */
+/*
+ 0:7      24:31       IRQTimeout
+ 8:15     16:23       IRQCount
+ 16:20    11:15       Reserved
+ 21       10          0
+ 22       9           UseIntOnEnd
+ 23       8           LdIRQCnt
+ 24       7           IRQEn
+ 25:28    3:6         Reserved
+ 29       2           IrqErrEn
+ 30       1           IrqDlyEn
+ 31       0           IrqCoalEn
+ */
+#define RX_IRQ_REG          0x0e            /* rw */
+#define IRQ_COAL        (1 << 0)
+#define IRQ_DLY         (1 << 1)
+#define IRQ_ERR         (1 << 2)
+#define IRQ_DMAERR      (1 << 7)            /* this is not documented ??? */
+/*
+ 0:7      24:31       DltTmrValue
+ 8:15     16:23       ClscCntrValue
+ 16:17    14:15       Reserved
+ 18:21    10:13       ClscCnt
+ 22:23    8:9         DlyCnt
+ 24:28    3::7        Reserved
+*/
+#define RX_CHNL_STS         0x0f        /* r */
+#define CHNL_STS_ENGBUSY    (1 << 1)
+#define CHNL_STS_EOP        (1 << 2)
+#define CHNL_STS_SOP        (1 << 3)
+#define CHNL_STS_CMPLT      (1 << 4)
+#define CHNL_STS_SOE        (1 << 5)
+#define CHNL_STS_IOE        (1 << 6)
+#define CHNL_STS_ERR        (1 << 7)
+
+#define CHNL_STS_BSYWR      (1 << 16)
+#define CHNL_STS_CURPERR    (1 << 17)
+#define CHNL_STS_NXTPERR    (1 << 18)
+#define CHNL_STS_ADDRERR    (1 << 19)
+#define CHNL_STS_CMPERR     (1 << 20)
+#define CHNL_STS_TAILERR    (1 << 21)
+/*
+ 0:9      22:31   Reserved
+ 10       21      TailPErr
+ 11       20      CmpErr
+ 12       19      AddrErr
+ 13       18      NxtPErr
+ 14       17      CurPErr
+ 15       16      BsyWr
+ 16:23    8:15    Reserved
+ 24       7       Error
+ 25       6       IOE
+ 26       5       SOE
+ 27       4       Cmplt
+ 28       3       SOP
+ 29       2       EOP
+ 30       1       EngBusy
+ 31       0       Reserved
+*/
+
+#define DMA_CONTROL_REG             0x10            /* rw */
+#define DMA_CONTROL_RST                 (1 << 0)
+#define DMA_TAIL_ENABLE                 (1 << 2)
+
+/* XPS_LL_TEMAC direct registers definition */
+
+#define XTE_RAF0_OFFSET              0x00
+#define RAF0_RST                        (1 << 0)
+#define RAF0_MCSTREJ                    (1 << 1)
+#define RAF0_BCSTREJ                    (1 << 2)
+#define XTE_TPF0_OFFSET              0x04
+#define XTE_IFGP0_OFFSET             0x08
+#define XTE_ISR0_OFFSET              0x0c
+#define ISR0_HARDACSCMPLT               (1 << 0)
+#define ISR0_AUTONEG                    (1 << 1)
+#define ISR0_RXCMPLT                    (1 << 2)
+#define ISR0_RXREJ                      (1 << 3)
+#define ISR0_RXFIFOOVR                  (1 << 4)
+#define ISR0_TXCMPLT                    (1 << 5)
+#define ISR0_RXDCMLCK                   (1 << 6)
+
+#define XTE_IPR0_OFFSET              0x10
+#define XTE_IER0_OFFSET              0x14
+
+#define XTE_MSW0_OFFSET              0x20
+#define XTE_LSW0_OFFSET              0x24
+#define XTE_CTL0_OFFSET              0x28
+#define XTE_RDY0_OFFSET              0x2c
+
+#define XTE_RSE_MIIM_RR_MASK      0x0002
+#define XTE_RSE_MIIM_WR_MASK      0x0004
+#define XTE_RSE_CFG_RR_MASK       0x0020
+#define XTE_RSE_CFG_WR_MASK       0x0040
+#define XTE_RDY0_HARD_ACS_RDY_MASK  (0x10000)
+
+/* XPS_LL_TEMAC indirect registers offset definition */
+
+#define	XTE_RXC0_OFFSET			0x00000200 /* Rx configuration word 0 */
+#define	XTE_RXC1_OFFSET			0x00000240 /* Rx configuration word 1 */
+#define XTE_RXC1_RXRST_MASK		(1 << 31)  /* Receiver reset */
+#define XTE_RXC1_RXJMBO_MASK		(1 << 30)  /* Jumbo frame enable */
+#define XTE_RXC1_RXFCS_MASK		(1 << 29)  /* FCS not stripped */
+#define XTE_RXC1_RXEN_MASK		(1 << 28)  /* Receiver enable */
+#define XTE_RXC1_RXVLAN_MASK		(1 << 27)  /* VLAN enable */
+#define XTE_RXC1_RXHD_MASK		(1 << 26)  /* Half duplex */
+#define XTE_RXC1_RXLT_MASK		(1 << 25)  /* Length/type check disable */
+
+#define XTE_TXC_OFFSET			0x00000280 /*  Tx configuration */
+#define XTE_TXC_TXRST_MASK		(1 << 31)  /* Transmitter reset */
+#define XTE_TXC_TXJMBO_MASK		(1 << 30)  /* Jumbo frame enable */
+#define XTE_TXC_TXFCS_MASK		(1 << 29)  /* Generate FCS */
+#define XTE_TXC_TXEN_MASK		(1 << 28)  /* Transmitter enable */
+#define XTE_TXC_TXVLAN_MASK		(1 << 27)  /* VLAN enable */
+#define XTE_TXC_TXHD_MASK		(1 << 26)  /* Half duplex */
+
+#define XTE_FCC_OFFSET			0x000002C0 /* Flow control config */
+#define XTE_FCC_RXFLO_MASK		(1 << 29)  /* Rx flow control enable */
+#define XTE_FCC_TXFLO_MASK		(1 << 30)  /* Tx flow control enable */
+
+#define XTE_EMCFG_OFFSET		0x00000300 /* EMAC configuration */
+#define XTE_EMCFG_LINKSPD_MASK		0xC0000000 /* Link speed */
+#define XTE_EMCFG_HOSTEN_MASK		(1 << 26)  /* Host interface enable */
+#define XTE_EMCFG_LINKSPD_10		0x00000000 /* 10 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_100		(1 << 30)  /* 100 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_1000		(1 << 31)  /* 1000 Mbit LINKSPD_MASK */
+
+#define XTE_GMIC_OFFSET			0x00000320 /* RGMII/SGMII config */
+#define XTE_MC_OFFSET			0x00000340 /* MDIO configuration */
+#define XTE_UAW0_OFFSET			0x00000380 /* Unicast address word 0 */
+#define XTE_UAW1_OFFSET			0x00000384 /* Unicast address word 1 */
+
+#define XTE_MAW0_OFFSET			0x00000388 /* Multicast addr word 0 */
+#define XTE_MAW1_OFFSET			0x0000038C /* Multicast addr word 1 */
+#define XTE_AFM_OFFSET			0x00000390 /* Promiscuous mode */
+#define XTE_AFM_EPPRM_MASK		(1 << 31)  /* Promiscuous mode enable */
+
+/* Interrupt Request status */
+#define XTE_TIS_OFFSET			0x000003A0
+#define TIS_FRIS			(1 << 0)
+#define TIS_MRIS			(1 << 1)
+#define TIS_MWIS			(1 << 2)
+#define TIS_ARIS			(1 << 3)
+#define TIS_AWIS			(1 << 4)
+#define TIS_CRIS			(1 << 5)
+#define TIS_CWIS			(1 << 6)
+
+#define XTE_TIE_OFFSET			0x000003A4 /* Interrupt enable */
+
+/**  MII Mamagement Control register (MGTCR) */
+#define XTE_MGTDR_OFFSET		0x000003B0 /* MII data */
+#define XTE_MIIMAI_OFFSET		0x000003B4 /* MII control */
+
+#define CNTLREG_WRITE_ENABLE_MASK   0x8000
+#define CNTLREG_EMAC1SEL_MASK       0x0400
+#define CNTLREG_ADDRESSCODE_MASK    0x03ff
+
+/* CDMAC descriptor status bit definitions */
+
+#define STS_CTRL_APP0_ERR         (1 << 31)
+#define STS_CTRL_APP0_IRQONEND    (1 << 30)
+/* undoccumented */
+#define STS_CTRL_APP0_STOPONEND   (1 << 29)
+#define STS_CTRL_APP0_CMPLT       (1 << 28)
+#define STS_CTRL_APP0_SOP         (1 << 27)
+#define STS_CTRL_APP0_EOP         (1 << 26)
+#define STS_CTRL_APP0_ENGBUSY     (1 << 25)
+/* undocumented */
+#define STS_CTRL_APP0_ENGRST      (1 << 24)
+
+#define TX_CONTROL_CALC_CSUM_MASK   1
+
+#define XTE_ALIGN       32
+#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
+
+#define MULTICAST_CAM_TABLE_NUM 4
+
+/* TX/RX CURDESC_PTR points to first descriptor */
+/* TX/RX TAILDESC_PTR points to last descriptor in linked list */
+
+/**
+ * struct cdmac_bd - LocalLink buffer descriptor format
+ *
+ * app0 bits:
+ *	0    Error
+ *	1    IrqOnEnd    generate an interrupt at completion of DMA  op
+ *	2    reserved
+ *	3    completed   Current descriptor completed
+ *	4    SOP         TX - marks first desc/ RX marks first desct
+ *	5    EOP         TX marks last desc/RX marks last desc
+ *	6    EngBusy     DMA is processing
+ *	7    reserved
+ *	8:31 application specific
+ */
+struct cdmac_bd {
+	u32 next;	/* Physical address of next buffer descriptor */
+	u32 phys;
+	u32 len;
+	u32 app0;
+	u32 app1;	/* TX start << 16 | insert */
+	u32 app2;	/* TX csum */
+	u32 app3;
+	u32 app4;	/* skb for TX length for RX */
+};
+
+struct temac_local {
+	struct net_device *ndev;
+	struct device *dev;
+
+	/* Connection to PHY device */
+	struct phy_device *phy_dev;	/* Pointer to PHY device */
+	struct device_node *phy_node;
+
+	/* MDIO bus data */
+	struct mii_bus *mii_bus;	/* MII bus reference */
+	int mdio_irqs[PHY_MAX_ADDR];	/* IRQs table for MDIO bus */
+
+	/* IO registers and IRQs */
+	void __iomem *regs;
+	dcr_host_t sdma_dcrs;
+	int tx_irq;
+	int rx_irq;
+	int emac_num;
+
+	struct sk_buff **rx_skb;
+	spinlock_t rx_lock;
+	struct mutex indirect_mutex;
+	u32 options;			/* Current options word */
+	int last_link;
+
+	/* Buffer descriptors */
+	struct cdmac_bd *tx_bd_v;
+	dma_addr_t tx_bd_p;
+	struct cdmac_bd *rx_bd_v;
+	dma_addr_t rx_bd_p;
+	int tx_bd_ci;
+	int tx_bd_next;
+	int tx_bd_tail;
+	int rx_bd_ci;
+};
+
+/* xilinx_temac.c */
+u32 temac_ior(struct temac_local *lp, int offset);
+void temac_iow(struct temac_local *lp, int offset, u32 value);
+int temac_indirect_busywait(struct temac_local *lp);
+u32 temac_indirect_in32(struct temac_local *lp, int reg);
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
+
+
+/* xilinx_temac_mdio.c */
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np);
+void temac_mdio_teardown(struct temac_local *lp);
+
+#endif /* XILINX_LL_TEMAC_H */
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
new file mode 100644
index 00000000000..96e7248876c
--- /dev/null
+++ b/drivers/net/ll_temac_main.c
@@ -0,0 +1,969 @@
+/*
+ * Driver for Xilinx TEMAC Ethernet device
+ *
+ * Copyright (c) 2008 Nissin Systems Co., Ltd.,  Yoshio Kashiwagi
+ * Copyright (c) 2005-2008 DLA Systems,  David H. Lynch Jr. <dhlii@dlasys.net>
+ * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
+ *
+ * This is a driver for the Xilinx ll_temac ipcore which is often used
+ * in the Virtex and Spartan series of chips.
+ *
+ * Notes:
+ * - The ll_temac hardware uses indirect access for many of the TEMAC
+ *   registers, include the MDIO bus.  However, indirect access to MDIO
+ *   registers take considerably more clock cycles than to TEMAC registers.
+ *   MDIO accesses are long, so threads doing them should probably sleep
+ *   rather than busywait.  However, since only one indirect access can be
+ *   in progress at any given time, that means that *all* indirect accesses
+ *   could end up sleeping (to wait for an MDIO access to complete).
+ *   Fortunately none of the indirect accesses are on the 'hot' path for tx
+ *   or rx, so this should be okay.
+ *
+ * TODO:
+ * - Fix driver to work on more than just Virtex5.  Right now the driver
+ *   assumes that the locallink DMA registers are accessed via DCR
+ *   instructions.
+ * - Factor out locallink DMA code into separate driver
+ * - Fix multicast assignment.
+ * - Fix support for hardware checksumming.
+ * - Testing.  Lots and lots of testing.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/tcp.h>      /* needed for sizeof(tcphdr) */
+#include <linux/udp.h>      /* needed for sizeof(udphdr) */
+#include <linux/phy.h>
+#include <linux/in.h>
+#include <linux/io.h>
+#include <linux/ip.h>
+
+#include "ll_temac.h"
+
+#define TX_BD_NUM   64
+#define RX_BD_NUM   128
+
+/* ---------------------------------------------------------------------
+ * Low level register access functions
+ */
+
+u32 temac_ior(struct temac_local *lp, int offset)
+{
+	return in_be32((u32 *)(lp->regs + offset));
+}
+
+void temac_iow(struct temac_local *lp, int offset, u32 value)
+{
+	out_be32((u32 *) (lp->regs + offset), value);
+}
+
+int temac_indirect_busywait(struct temac_local *lp)
+{
+	long end = jiffies + 2;
+
+	while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) {
+		if (end - jiffies <= 0) {
+			WARN_ON(1);
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+	return 0;
+}
+
+/**
+ * temac_indirect_in32
+ *
+ * lp->indirect_mutex must be held when calling this function
+ */
+u32 temac_indirect_in32(struct temac_local *lp, int reg)
+{
+	u32 val;
+
+	if (temac_indirect_busywait(lp))
+		return -ETIMEDOUT;
+	temac_iow(lp, XTE_CTL0_OFFSET, reg);
+	if (temac_indirect_busywait(lp))
+		return -ETIMEDOUT;
+	val = temac_ior(lp, XTE_LSW0_OFFSET);
+
+	return val;
+}
+
+/**
+ * temac_indirect_out32
+ *
+ * lp->indirect_mutex must be held when calling this function
+ */
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
+{
+	if (temac_indirect_busywait(lp))
+		return;
+	temac_iow(lp, XTE_LSW0_OFFSET, value);
+	temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
+}
+
+static u32 temac_dma_in32(struct temac_local *lp, int reg)
+{
+	return dcr_read(lp->sdma_dcrs, reg);
+}
+
+static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
+{
+	dcr_write(lp->sdma_dcrs, reg, value);
+}
+
+/**
+ * temac_dma_bd_init - Setup buffer descriptor rings
+ */
+static int temac_dma_bd_init(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct sk_buff *skb;
+	int i;
+
+	lp->rx_skb = kzalloc(sizeof(struct sk_buff)*RX_BD_NUM, GFP_KERNEL);
+	/* allocate the tx and rx ring buffer descriptors. */
+	/* returns a virtual addres and a physical address. */
+	lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+					 sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+					 &lp->tx_bd_p, GFP_KERNEL);
+	lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+					 sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+					 &lp->rx_bd_p, GFP_KERNEL);
+
+	memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM);
+	for (i = 0; i < TX_BD_NUM; i++) {
+		lp->tx_bd_v[i].next = lp->tx_bd_p +
+				sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM);
+	}
+
+	memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM);
+	for (i = 0; i < RX_BD_NUM; i++) {
+		lp->rx_bd_v[i].next = lp->rx_bd_p +
+				sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM);
+
+		skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE
+				+ XTE_ALIGN, GFP_ATOMIC);
+		if (skb == 0) {
+			dev_err(&ndev->dev, "alloc_skb error %d\n", i);
+			return -1;
+		}
+		lp->rx_skb[i] = skb;
+		skb_reserve(skb,  BUFFER_ALIGN(skb->data));
+		/* returns physical address of skb->data */
+		lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
+						     skb->data,
+						     XTE_MAX_JUMBO_FRAME_SIZE,
+						     DMA_FROM_DEVICE);
+		lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE;
+		lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND;
+	}
+
+	temac_dma_out32(lp, TX_CHNL_CTRL, 0x10220400 |
+					  CHNL_CTRL_IRQ_EN |
+					  CHNL_CTRL_IRQ_DLY_EN |
+					  CHNL_CTRL_IRQ_COAL_EN);
+	/* 0x10220483 */
+	/* 0x00100483 */
+	temac_dma_out32(lp, RX_CHNL_CTRL, 0xff010000 |
+					  CHNL_CTRL_IRQ_EN |
+					  CHNL_CTRL_IRQ_DLY_EN |
+					  CHNL_CTRL_IRQ_COAL_EN |
+					  CHNL_CTRL_IRQ_IOE);
+	/* 0xff010283 */
+
+	temac_dma_out32(lp, RX_CURDESC_PTR,  lp->rx_bd_p);
+	temac_dma_out32(lp, RX_TAILDESC_PTR,
+		       lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
+	temac_dma_out32(lp, TX_CURDESC_PTR, lp->tx_bd_p);
+
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * net_device_ops
+ */
+
+static int temac_set_mac_address(struct net_device *ndev, void *address)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+
+	if (address)
+		memcpy(ndev->dev_addr, address, ETH_ALEN);
+
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		random_ether_addr(ndev->dev_addr);
+
+	/* set up unicast MAC address filter set its mac address */
+	mutex_lock(&lp->indirect_mutex);
+	temac_indirect_out32(lp, XTE_UAW0_OFFSET,
+			     (ndev->dev_addr[0]) |
+			     (ndev->dev_addr[1] << 8) |
+			     (ndev->dev_addr[2] << 16) |
+			     (ndev->dev_addr[3] << 24));
+	/* There are reserved bits in EUAW1
+	 * so don't affect them Set MAC bits [47:32] in EUAW1 */
+	temac_indirect_out32(lp, XTE_UAW1_OFFSET,
+			     (ndev->dev_addr[4] & 0x000000ff) |
+			     (ndev->dev_addr[5] << 8));
+	mutex_unlock(&lp->indirect_mutex);
+
+	return 0;
+}
+
+static void temac_set_multicast_list(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	u32 multi_addr_msw, multi_addr_lsw, val;
+	int i;
+
+	mutex_lock(&lp->indirect_mutex);
+	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC)
+			|| ndev->mc_count > MULTICAST_CAM_TABLE_NUM) {
+		/*
+		 *	We must make the kernel realise we had to move
+		 *	into promisc mode or we start all out war on
+		 *	the cable. If it was a promisc request the
+		 *	flag is already set. If not we assert it.
+		 */
+		ndev->flags |= IFF_PROMISC;
+		temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
+		dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
+	} else if (ndev->mc_count) {
+		struct dev_mc_list *mclist = ndev->mc_list;
+		for (i = 0; mclist && i < ndev->mc_count; i++) {
+
+			if (i >= MULTICAST_CAM_TABLE_NUM)
+				break;
+			multi_addr_msw = ((mclist->dmi_addr[3] << 24) |
+					  (mclist->dmi_addr[2] << 16) |
+					  (mclist->dmi_addr[1] << 8) |
+					  (mclist->dmi_addr[0]));
+			temac_indirect_out32(lp, XTE_MAW0_OFFSET,
+					     multi_addr_msw);
+			multi_addr_lsw = ((mclist->dmi_addr[5] << 8) |
+					  (mclist->dmi_addr[4]) | (i << 16));
+			temac_indirect_out32(lp, XTE_MAW1_OFFSET,
+					     multi_addr_lsw);
+			mclist = mclist->next;
+		}
+	} else {
+		val = temac_indirect_in32(lp, XTE_AFM_OFFSET);
+		temac_indirect_out32(lp, XTE_AFM_OFFSET,
+				     val & ~XTE_AFM_EPPRM_MASK);
+		temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0);
+		temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0);
+		dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
+	}
+	mutex_unlock(&lp->indirect_mutex);
+}
+
+struct temac_option {
+	int flg;
+	u32 opt;
+	u32 reg;
+	u32 m_or;
+	u32 m_and;
+} temac_options[] = {
+	/* Turn on jumbo packet support for both Rx and Tx */
+	{
+		.opt = XTE_OPTION_JUMBO,
+		.reg = XTE_TXC_OFFSET,
+		.m_or = XTE_TXC_TXJMBO_MASK,
+	},
+	{
+		.opt = XTE_OPTION_JUMBO,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXJMBO_MASK,
+	},
+	/* Turn on VLAN packet support for both Rx and Tx */
+	{
+		.opt = XTE_OPTION_VLAN,
+		.reg = XTE_TXC_OFFSET,
+		.m_or =XTE_TXC_TXVLAN_MASK,
+	},
+	{
+		.opt = XTE_OPTION_VLAN,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXVLAN_MASK,
+	},
+	/* Turn on FCS stripping on receive packets */
+	{
+		.opt = XTE_OPTION_FCS_STRIP,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXFCS_MASK,
+	},
+	/* Turn on FCS insertion on transmit packets */
+	{
+		.opt = XTE_OPTION_FCS_INSERT,
+		.reg = XTE_TXC_OFFSET,
+		.m_or =XTE_TXC_TXFCS_MASK,
+	},
+	/* Turn on length/type field checking on receive packets */
+	{
+		.opt = XTE_OPTION_LENTYPE_ERR,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXLT_MASK,
+	},
+	/* Turn on flow control */
+	{
+		.opt = XTE_OPTION_FLOW_CONTROL,
+		.reg = XTE_FCC_OFFSET,
+		.m_or =XTE_FCC_RXFLO_MASK,
+	},
+	/* Turn on flow control */
+	{
+		.opt = XTE_OPTION_FLOW_CONTROL,
+		.reg = XTE_FCC_OFFSET,
+		.m_or =XTE_FCC_TXFLO_MASK,
+	},
+	/* Turn on promiscuous frame filtering (all frames are received ) */
+	{
+		.opt = XTE_OPTION_PROMISC,
+		.reg = XTE_AFM_OFFSET,
+		.m_or =XTE_AFM_EPPRM_MASK,
+	},
+	/* Enable transmitter if not already enabled */
+	{
+		.opt = XTE_OPTION_TXEN,
+		.reg = XTE_TXC_OFFSET,
+		.m_or =XTE_TXC_TXEN_MASK,
+	},
+	/* Enable receiver? */
+	{
+		.opt = XTE_OPTION_RXEN,
+		.reg = XTE_RXC1_OFFSET,
+		.m_or =XTE_RXC1_RXEN_MASK,
+	},
+	{}
+};
+
+/**
+ * temac_setoptions
+ */
+static u32 temac_setoptions(struct net_device *ndev, u32 options)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct temac_option *tp = &temac_options[0];
+	int reg;
+
+	mutex_lock(&lp->indirect_mutex);
+	while (tp->opt) {
+		reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or;
+		if (options & tp->opt)
+			reg |= tp->m_or;
+		temac_indirect_out32(lp, tp->reg, reg);
+		tp++;
+	}
+	lp->options |= options;
+	mutex_unlock(&lp->indirect_mutex);
+
+	return (0);
+}
+
+/* Initilize temac */
+static void temac_device_reset(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	u32 timeout;
+	u32 val;
+
+	/* Perform a software reset */
+
+	/* 0x300 host enable bit ? */
+	/* reset PHY through control register ?:1 */
+
+	dev_dbg(&ndev->dev, "%s()\n", __func__);
+
+	mutex_lock(&lp->indirect_mutex);
+	/* Reset the receiver and wait for it to finish reset */
+	temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK);
+	timeout = 1000;
+	while (temac_indirect_in32(lp, XTE_RXC1_OFFSET) & XTE_RXC1_RXRST_MASK) {
+		udelay(1);
+		if (--timeout == 0) {
+			dev_err(&ndev->dev,
+				"temac_device_reset RX reset timeout!!\n");
+			break;
+		}
+	}
+
+	/* Reset the transmitter and wait for it to finish reset */
+	temac_indirect_out32(lp, XTE_TXC_OFFSET, XTE_TXC_TXRST_MASK);
+	timeout = 1000;
+	while (temac_indirect_in32(lp, XTE_TXC_OFFSET) & XTE_TXC_TXRST_MASK) {
+		udelay(1);
+		if (--timeout == 0) {
+			dev_err(&ndev->dev,
+				"temac_device_reset TX reset timeout!!\n");
+			break;
+		}
+	}
+
+	/* Disable the receiver */
+	val = temac_indirect_in32(lp, XTE_RXC1_OFFSET);
+	temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK);
+
+	/* Reset Local Link (DMA) */
+	temac_dma_out32(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+	timeout = 1000;
+	while (temac_dma_in32(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) {
+		udelay(1);
+		if (--timeout == 0) {
+			dev_err(&ndev->dev,
+				"temac_device_reset DMA reset timeout!!\n");
+			break;
+		}
+	}
+	temac_dma_out32(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE);
+
+	temac_dma_bd_init(ndev);
+
+	temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0);
+	temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0);
+	temac_indirect_out32(lp, XTE_TXC_OFFSET, 0);
+	temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK);
+
+	mutex_unlock(&lp->indirect_mutex);
+
+	/* Sync default options with HW
+	 * but leave receiver and transmitter disabled.  */
+	temac_setoptions(ndev,
+			 lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN));
+
+	temac_set_mac_address(ndev, NULL);
+
+	/* Set address filter table */
+	temac_set_multicast_list(ndev);
+	if (temac_setoptions(ndev, lp->options))
+		dev_err(&ndev->dev, "Error setting TEMAC options\n");
+
+	/* Init Driver variable */
+	ndev->trans_start = 0;
+}
+
+void temac_adjust_link(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct phy_device *phy = lp->phy_dev;
+	u32 mii_speed;
+	int link_state;
+
+	/* hash together the state values to decide if something has changed */
+	link_state = phy->speed | (phy->duplex << 1) | phy->link;
+
+	mutex_lock(&lp->indirect_mutex);
+	if (lp->last_link != link_state) {
+		mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET);
+		mii_speed &= ~XTE_EMCFG_LINKSPD_MASK;
+
+		switch (phy->speed) {
+		case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break;
+		case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break;
+		case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break;
+		}
+
+		/* Write new speed setting out to TEMAC */
+		temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed);
+		lp->last_link = link_state;
+		phy_print_status(phy);
+	}
+	mutex_unlock(&lp->indirect_mutex);
+}
+
+static void temac_start_xmit_done(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct cdmac_bd *cur_p;
+	unsigned int stat = 0;
+
+	cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+	stat = cur_p->app0;
+
+	while (stat & STS_CTRL_APP0_CMPLT) {
+		dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len,
+				 DMA_TO_DEVICE);
+		if (cur_p->app4)
+			dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
+		cur_p->app0 = 0;
+
+		ndev->stats.tx_packets++;
+		ndev->stats.tx_bytes += cur_p->len;
+
+		lp->tx_bd_ci++;
+		if (lp->tx_bd_ci >= TX_BD_NUM)
+			lp->tx_bd_ci = 0;
+
+		cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+		stat = cur_p->app0;
+	}
+
+	netif_wake_queue(ndev);
+}
+
+static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct cdmac_bd *cur_p;
+	dma_addr_t start_p, tail_p;
+	int ii;
+	unsigned long num_frag;
+	skb_frag_t *frag;
+
+	num_frag = skb_shinfo(skb)->nr_frags;
+	frag = &skb_shinfo(skb)->frags[0];
+	start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+	cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+
+	if (cur_p->app0 & STS_CTRL_APP0_CMPLT) {
+		if (!netif_queue_stopped(ndev)) {
+			netif_stop_queue(ndev);
+			return NETDEV_TX_BUSY;
+		}
+		return NETDEV_TX_BUSY;
+	}
+
+	cur_p->app0 = 0;
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		const struct iphdr *ip = ip_hdr(skb);
+		int length = 0, start = 0, insert = 0;
+
+		switch (ip->protocol) {
+		case IPPROTO_TCP:
+			start = sizeof(struct iphdr) + ETH_HLEN;
+			insert = sizeof(struct iphdr) + ETH_HLEN + 16;
+			length = ip->tot_len - sizeof(struct iphdr);
+			break;
+		case IPPROTO_UDP:
+			start = sizeof(struct iphdr) + ETH_HLEN;
+			insert = sizeof(struct iphdr) + ETH_HLEN + 6;
+			length = ip->tot_len - sizeof(struct iphdr);
+			break;
+		default:
+			break;
+		}
+		cur_p->app1 = ((start << 16) | insert);
+		cur_p->app2 = csum_tcpudp_magic(ip->saddr, ip->daddr,
+						length, ip->protocol, 0);
+		skb->data[insert] = 0;
+		skb->data[insert + 1] = 0;
+	}
+	cur_p->app0 |= STS_CTRL_APP0_SOP;
+	cur_p->len = skb_headlen(skb);
+	cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len,
+				     DMA_TO_DEVICE);
+	cur_p->app4 = (unsigned long)skb;
+
+	for (ii = 0; ii < num_frag; ii++) {
+		lp->tx_bd_tail++;
+		if (lp->tx_bd_tail >= TX_BD_NUM)
+			lp->tx_bd_tail = 0;
+
+		cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+		cur_p->phys = dma_map_single(ndev->dev.parent,
+					     (void *)page_address(frag->page) +
+					          frag->page_offset,
+					     frag->size, DMA_TO_DEVICE);
+		cur_p->len = frag->size;
+		cur_p->app0 = 0;
+		frag++;
+	}
+	cur_p->app0 |= STS_CTRL_APP0_EOP;
+
+	tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+	lp->tx_bd_tail++;
+	if (lp->tx_bd_tail >= TX_BD_NUM)
+		lp->tx_bd_tail = 0;
+
+	/* Kick off the transfer */
+	temac_dma_out32(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
+
+	return 0;
+}
+
+
+static void ll_temac_recv(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	struct sk_buff *skb, *new_skb;
+	unsigned int bdstat;
+	struct cdmac_bd *cur_p;
+	dma_addr_t tail_p;
+	int length;
+	unsigned long skb_vaddr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lp->rx_lock, flags);
+
+	tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+	cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+
+	bdstat = cur_p->app0;
+	while ((bdstat & STS_CTRL_APP0_CMPLT)) {
+
+		skb = lp->rx_skb[lp->rx_bd_ci];
+		length = cur_p->app4;
+
+		skb_vaddr = virt_to_bus(skb->data);
+		dma_unmap_single(ndev->dev.parent, skb_vaddr, length,
+				 DMA_FROM_DEVICE);
+
+		skb_put(skb, length);
+		skb->dev = ndev;
+		skb->protocol = eth_type_trans(skb, ndev);
+		skb->ip_summed = CHECKSUM_NONE;
+
+		netif_rx(skb);
+
+		ndev->stats.rx_packets++;
+		ndev->stats.rx_bytes += length;
+
+		new_skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE + XTE_ALIGN,
+				GFP_ATOMIC);
+		if (new_skb == 0) {
+			dev_err(&ndev->dev, "no memory for new sk_buff\n");
+			spin_unlock_irqrestore(&lp->rx_lock, flags);
+			return;
+		}
+
+		skb_reserve(new_skb, BUFFER_ALIGN(new_skb->data));
+
+		cur_p->app0 = STS_CTRL_APP0_IRQONEND;
+		cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
+					     XTE_MAX_JUMBO_FRAME_SIZE,
+					     DMA_FROM_DEVICE);
+		cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE;
+		lp->rx_skb[lp->rx_bd_ci] = new_skb;
+
+		lp->rx_bd_ci++;
+		if (lp->rx_bd_ci >= RX_BD_NUM)
+			lp->rx_bd_ci = 0;
+
+		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+		bdstat = cur_p->app0;
+	}
+	temac_dma_out32(lp, RX_TAILDESC_PTR, tail_p);
+
+	spin_unlock_irqrestore(&lp->rx_lock, flags);
+}
+
+static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev)
+{
+	struct net_device *ndev = _ndev;
+	struct temac_local *lp = netdev_priv(ndev);
+	unsigned int status;
+
+	status = temac_dma_in32(lp, TX_IRQ_REG);
+	temac_dma_out32(lp, TX_IRQ_REG, status);
+
+	if (status & (IRQ_COAL | IRQ_DLY))
+		temac_start_xmit_done(lp->ndev);
+	if (status & 0x080)
+		dev_err(&ndev->dev, "DMA error 0x%x\n", status);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev)
+{
+	struct net_device *ndev = _ndev;
+	struct temac_local *lp = netdev_priv(ndev);
+	unsigned int status;
+
+	/* Read and clear the status registers */
+	status = temac_dma_in32(lp, RX_IRQ_REG);
+	temac_dma_out32(lp, RX_IRQ_REG, status);
+
+	if (status & (IRQ_COAL | IRQ_DLY))
+		ll_temac_recv(lp->ndev);
+
+	return IRQ_HANDLED;
+}
+
+static int temac_open(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+	int rc;
+
+	dev_dbg(&ndev->dev, "temac_open()\n");
+
+	if (lp->phy_node) {
+		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+					     temac_adjust_link, 0, 0);
+		if (!lp->phy_dev) {
+			dev_err(lp->dev, "of_phy_connect() failed\n");
+			return -ENODEV;
+		}
+
+		phy_start(lp->phy_dev);
+	}
+
+	rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
+	if (rc)
+		goto err_tx_irq;
+	rc = request_irq(lp->rx_irq, ll_temac_rx_irq, 0, ndev->name, ndev);
+	if (rc)
+		goto err_rx_irq;
+
+	temac_device_reset(ndev);
+	return 0;
+
+ err_rx_irq:
+	free_irq(lp->tx_irq, ndev);
+ err_tx_irq:
+	if (lp->phy_dev)
+		phy_disconnect(lp->phy_dev);
+	lp->phy_dev = NULL;
+	dev_err(lp->dev, "request_irq() failed\n");
+	return rc;
+}
+
+static int temac_stop(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+
+	dev_dbg(&ndev->dev, "temac_close()\n");
+
+	free_irq(lp->tx_irq, ndev);
+	free_irq(lp->rx_irq, ndev);
+
+	if (lp->phy_dev)
+		phy_disconnect(lp->phy_dev);
+	lp->phy_dev = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+temac_poll_controller(struct net_device *ndev)
+{
+	struct temac_local *lp = netdev_priv(ndev);
+
+	disable_irq(lp->tx_irq);
+	disable_irq(lp->rx_irq);
+
+	ll_temac_rx_irq(lp->tx_irq, lp);
+	ll_temac_tx_irq(lp->rx_irq, lp);
+
+	enable_irq(lp->tx_irq);
+	enable_irq(lp->rx_irq);
+}
+#endif
+
+static const struct net_device_ops temac_netdev_ops = {
+	.ndo_open = temac_open,
+	.ndo_stop = temac_stop,
+	.ndo_start_xmit = temac_start_xmit,
+	.ndo_set_mac_address = temac_set_mac_address,
+	//.ndo_set_multicast_list = temac_set_multicast_list,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = temac_poll_controller,
+#endif
+};
+
+/* ---------------------------------------------------------------------
+ * SYSFS device attributes
+ */
+static ssize_t temac_show_llink_regs(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct temac_local *lp = netdev_priv(ndev);
+	int i, len = 0;
+
+	for (i = 0; i < 0x11; i++)
+		len += sprintf(buf + len, "%.8x%s", temac_dma_in32(lp, i),
+			       (i % 8) == 7 ? "\n" : " ");
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static DEVICE_ATTR(llink_regs, 0440, temac_show_llink_regs, NULL);
+
+static struct attribute *temac_device_attrs[] = {
+	&dev_attr_llink_regs.attr,
+	NULL,
+};
+
+static const struct attribute_group temac_attr_group = {
+	.attrs = temac_device_attrs,
+};
+
+static int __init
+temac_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+	struct device_node *np;
+	struct temac_local *lp;
+	struct net_device *ndev;
+	const void *addr;
+	int size, rc = 0;
+	unsigned int dcrs;
+
+	/* Init network device structure */
+	ndev = alloc_etherdev(sizeof(*lp));
+	if (!ndev) {
+		dev_err(&op->dev, "could not allocate device.\n");
+		return -ENOMEM;
+	}
+	ether_setup(ndev);
+	dev_set_drvdata(&op->dev, ndev);
+	SET_NETDEV_DEV(ndev, &op->dev);
+	ndev->flags &= ~IFF_MULTICAST;  /* clear multicast */
+	ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST;
+	ndev->netdev_ops = &temac_netdev_ops;
+#if 0
+	ndev->features |= NETIF_F_IP_CSUM; /* Can checksum TCP/UDP over IPv4. */
+	ndev->features |= NETIF_F_HW_CSUM; /* Can checksum all the packets. */
+	ndev->features |= NETIF_F_IPV6_CSUM; /* Can checksum IPV6 TCP/UDP */
+	ndev->features |= NETIF_F_HIGHDMA; /* Can DMA to high memory. */
+	ndev->features |= NETIF_F_HW_VLAN_TX; /* Transmit VLAN hw accel */
+	ndev->features |= NETIF_F_HW_VLAN_RX; /* Receive VLAN hw acceleration */
+	ndev->features |= NETIF_F_HW_VLAN_FILTER; /* Receive VLAN filtering */
+	ndev->features |= NETIF_F_VLAN_CHALLENGED; /* cannot handle VLAN pkts */
+	ndev->features |= NETIF_F_GSO; /* Enable software GSO. */
+	ndev->features |= NETIF_F_MULTI_QUEUE; /* Has multiple TX/RX queues */
+	ndev->features |= NETIF_F_LRO; /* large receive offload */
+#endif
+
+	/* setup temac private info structure */
+	lp = netdev_priv(ndev);
+	lp->ndev = ndev;
+	lp->dev = &op->dev;
+	lp->options = XTE_OPTION_DEFAULTS;
+	spin_lock_init(&lp->rx_lock);
+	mutex_init(&lp->indirect_mutex);
+
+	/* map device registers */
+	lp->regs = of_iomap(op->node, 0);
+	if (!lp->regs) {
+		dev_err(&op->dev, "could not map temac regs.\n");
+		goto nodev;
+	}
+
+	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
+	np = of_parse_phandle(op->node, "llink-connected", 0);
+	if (!np) {
+		dev_err(&op->dev, "could not find DMA node\n");
+		goto nodev;
+	}
+
+	dcrs = dcr_resource_start(np, 0);
+	if (dcrs == 0) {
+		dev_err(&op->dev, "could not get DMA register address\n");
+		goto nodev;;
+	}
+	lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+	dev_dbg(&op->dev, "DCR base: %x\n", dcrs);
+
+	lp->rx_irq = irq_of_parse_and_map(np, 0);
+	lp->tx_irq = irq_of_parse_and_map(np, 1);
+	if (!lp->rx_irq || !lp->tx_irq) {
+		dev_err(&op->dev, "could not determine irqs\n");
+		rc = -ENOMEM;
+		goto nodev;
+	}
+
+	of_node_put(np); /* Finished with the DMA node; drop the reference */
+
+	/* Retrieve the MAC address */
+	addr = of_get_property(op->node, "local-mac-address", &size);
+	if ((!addr) || (size != 6)) {
+		dev_err(&op->dev, "could not find MAC address\n");
+		rc = -ENODEV;
+		goto nodev;
+	}
+	temac_set_mac_address(ndev, (void *)addr);
+
+	rc = temac_mdio_setup(lp, op->node);
+	if (rc)
+		dev_warn(&op->dev, "error registering MDIO bus\n");
+
+	lp->phy_node = of_parse_phandle(op->node, "phy-handle", 0);
+	if (lp->phy_node)
+		dev_dbg(lp->dev, "using PHY node %s (%p)\n", np->full_name, np);
+
+	/* Add the device attributes */
+	rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
+	if (rc) {
+		dev_err(lp->dev, "Error creating sysfs files\n");
+		goto nodev;
+	}
+
+	rc = register_netdev(lp->ndev);
+	if (rc) {
+		dev_err(lp->dev, "register_netdev() error (%i)\n", rc);
+		goto err_register_ndev;
+	}
+
+	return 0;
+
+ err_register_ndev:
+	sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+ nodev:
+	free_netdev(ndev);
+	ndev = NULL;
+	return rc;
+}
+
+static int __devexit temac_of_remove(struct of_device *op)
+{
+	struct net_device *ndev = dev_get_drvdata(&op->dev);
+	struct temac_local *lp = netdev_priv(ndev);
+
+	temac_mdio_teardown(lp);
+	unregister_netdev(ndev);
+	sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+	if (lp->phy_node)
+		of_node_put(lp->phy_node);
+	lp->phy_node = NULL;
+	dev_set_drvdata(&op->dev, NULL);
+	free_netdev(ndev);
+	return 0;
+}
+
+static struct of_device_id temac_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,xps-ll-temac-1.01.b", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, temac_of_match);
+
+static struct of_platform_driver temac_of_driver = {
+	.match_table = temac_of_match,
+	.probe = temac_of_probe,
+	.remove = __devexit_p(temac_of_remove),
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "xilinx_temac",
+	},
+};
+
+static int __init temac_init(void)
+{
+	return of_register_platform_driver(&temac_of_driver);
+}
+module_init(temac_init);
+
+static void __exit temac_exit(void)
+{
+	of_unregister_platform_driver(&temac_of_driver);
+}
+module_exit(temac_exit);
+
+MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver");
+MODULE_AUTHOR("Yoshio Kashiwagi");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ll_temac_mdio.c b/drivers/net/ll_temac_mdio.c
new file mode 100644
index 00000000000..da0e462308d
--- /dev/null
+++ b/drivers/net/ll_temac_mdio.c
@@ -0,0 +1,120 @@
+/*
+ * MDIO bus driver for the Xilinx TEMAC device
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+
+#include "ll_temac.h"
+
+/* ---------------------------------------------------------------------
+ * MDIO Bus functions
+ */
+static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	struct temac_local *lp = bus->priv;
+	u32 rc;
+
+	/* Write the PHY address to the MIIM Access Initiator register.
+	 * When the transfer completes, the PHY register value will appear
+	 * in the LSW0 register */
+	mutex_lock(&lp->indirect_mutex);
+	temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
+	rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
+	mutex_unlock(&lp->indirect_mutex);
+
+	dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
+		phy_id, reg, rc);
+
+	return rc;
+}
+
+static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+{
+	struct temac_local *lp = bus->priv;
+
+	dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+		phy_id, reg, val);
+
+	/* First write the desired value into the write data register
+	 * and then write the address into the access initiator register
+	 */
+	mutex_lock(&lp->indirect_mutex);
+	temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
+	temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
+	mutex_unlock(&lp->indirect_mutex);
+
+	return 0;
+}
+
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
+{
+	struct mii_bus *bus;
+	const u32 *bus_hz;
+	int clk_div;
+	int rc, size;
+	struct resource res;
+
+	/* Calculate a reasonable divisor for the clock rate */
+	clk_div = 0x3f; /* worst-case default setting */
+	bus_hz = of_get_property(np, "clock-frequency", &size);
+	if (bus_hz && size >= sizeof(*bus_hz)) {
+		clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
+		if (clk_div < 1)
+			clk_div = 1;
+		if (clk_div > 0x3f)
+			clk_div = 0x3f;
+	}
+
+	/* Enable the MDIO bus by asserting the enable bit and writing
+	 * in the clock config */
+	mutex_lock(&lp->indirect_mutex);
+	temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
+	mutex_unlock(&lp->indirect_mutex);
+
+	bus = mdiobus_alloc();
+	if (!bus)
+		return -ENOMEM;
+
+	of_address_to_resource(np, 0, &res);
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
+		 (unsigned long long)res.start);
+	bus->priv = lp;
+	bus->name = "Xilinx TEMAC MDIO";
+	bus->read = temac_mdio_read;
+	bus->write = temac_mdio_write;
+	bus->parent = lp->dev;
+	bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
+
+	lp->mii_bus = bus;
+
+	rc = of_mdiobus_register(bus, np);
+	if (rc)
+		goto err_register;
+
+	mutex_lock(&lp->indirect_mutex);
+	dev_dbg(lp->dev, "MDIO bus registered;  MC:%x\n",
+		temac_indirect_in32(lp, XTE_MC_OFFSET));
+	mutex_unlock(&lp->indirect_mutex);
+	return 0;
+
+ err_register:
+	mdiobus_free(bus);
+	return rc;
+}
+
+void temac_mdio_teardown(struct temac_local *lp)
+{
+	mdiobus_unregister(lp->mii_bus);
+	kfree(lp->mii_bus->irq);
+	mdiobus_free(lp->mii_bus);
+	lp->mii_bus = NULL;
+}
+
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index b7d438a367f..da472c68748 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -62,6 +62,7 @@
 struct pcpu_lstats {
 	unsigned long packets;
 	unsigned long bytes;
+	unsigned long drops;
 };
 
 /*
@@ -71,18 +72,22 @@ struct pcpu_lstats {
 static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct pcpu_lstats *pcpu_lstats, *lb_stats;
+	int len;
 
 	skb_orphan(skb);
 
-	skb->protocol = eth_type_trans(skb,dev);
+	skb->protocol = eth_type_trans(skb, dev);
 
 	/* it's OK to use per_cpu_ptr() because BHs are off */
 	pcpu_lstats = dev->ml_priv;
 	lb_stats = per_cpu_ptr(pcpu_lstats, smp_processor_id());
-	lb_stats->bytes += skb->len;
-	lb_stats->packets++;
 
-	netif_rx(skb);
+	len = skb->len;
+	if (likely(netif_rx(skb) == NET_RX_SUCCESS)) {
+		lb_stats->bytes += len;
+		lb_stats->packets++;
+	} else
+		lb_stats->drops++;
 
 	return 0;
 }
@@ -93,6 +98,7 @@ static struct net_device_stats *loopback_get_stats(struct net_device *dev)
 	struct net_device_stats *stats = &dev->stats;
 	unsigned long bytes = 0;
 	unsigned long packets = 0;
+	unsigned long drops = 0;
 	int i;
 
 	pcpu_lstats = dev->ml_priv;
@@ -102,11 +108,14 @@ static struct net_device_stats *loopback_get_stats(struct net_device *dev)
 		lb_stats = per_cpu_ptr(pcpu_lstats, i);
 		bytes   += lb_stats->bytes;
 		packets += lb_stats->packets;
+		drops   += lb_stats->drops;
 	}
 	stats->rx_packets = packets;
 	stats->tx_packets = packets;
-	stats->rx_bytes = bytes;
-	stats->tx_bytes = bytes;
+	stats->rx_dropped = drops;
+	stats->rx_errors  = drops;
+	stats->rx_bytes   = bytes;
+	stats->tx_bytes   = bytes;
 	return stats;
 }
 
@@ -161,6 +170,7 @@ static void loopback_setup(struct net_device *dev)
 	dev->tx_queue_len	= 0;
 	dev->type		= ARPHRD_LOOPBACK;	/* 0x0001*/
 	dev->flags		= IFF_LOOPBACK;
+	dev->priv_flags	       &= ~IFF_XMIT_DST_RELEASE;
 	dev->features 		= NETIF_F_SG | NETIF_F_FRAGLIST
 		| NETIF_F_TSO
 		| NETIF_F_NO_CSUM
diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 22e74a0e036..f8fa0c3f0f6 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -620,19 +620,12 @@ static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * nd
 
 	/* Good, done, now spit out some messages */
 	printk(KERN_INFO "%s: %s in slot %X (type %s)\n",
-		   dev->name, ndev->board->name, ndev->board->slot, cardname[type]);
-	printk(KERN_INFO "MAC ");
-	{
-		int i;
-		for (i = 0; i < 6; i++) {
-			printk("%2.2x", dev->dev_addr[i]);
-			if (i < 5)
-				printk(":");
-		}
-	}
-	printk(" IRQ %d, %d KB shared memory at %#lx,  %d-bit access.\n",
-		   dev->irq, (int)((dev->mem_end - dev->mem_start)/0x1000) * 4,
-		   dev->mem_start, access_bitmode?32:16);
+	       dev->name, ndev->board->name, ndev->board->slot, cardname[type]);
+	printk(KERN_INFO
+	       "MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n",
+	       dev->dev_addr, dev->irq,
+	       (unsigned int)(dev->mem_end - dev->mem_start) >> 10,
+	       dev->mem_start, access_bitmode ? 32 : 16);
 	return 0;
 }
 
diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c
index 384e072de2e..dab45339d3a 100644
--- a/drivers/net/mac89x0.c
+++ b/drivers/net/mac89x0.c
@@ -73,8 +73,6 @@ static char *version =
    or override something. */
 #include <linux/module.h>
 
-#define PRINTK(x) printk x
-
 /*
   Sources:
 
@@ -402,7 +400,7 @@ net_send_packet(struct sk_buff *skb, struct net_device *dev)
 		/* Gasp!  It hasn't.  But that shouldn't happen since
 		   we're waiting for TxOk, so return 1 and requeue this packet. */
 		local_irq_restore(flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Write the contents of the packet */
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index e82aee41d77..5b5c25368d1 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -599,6 +599,21 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void macb_poll_controller(struct net_device *dev)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	macb_interrupt(dev->irq, dev);
+	local_irq_restore(flags);
+}
+#endif
+
 static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct macb *bp = netdev_priv(dev);
@@ -630,7 +645,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			"BUG! Tx Ring full when queue awake!\n");
 		dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
 			bp->tx_head, bp->tx_tail);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	entry = bp->tx_head;
@@ -1094,6 +1109,9 @@ static const struct net_device_ops macb_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= macb_poll_controller,
+#endif
 };
 
 static int __init macb_probe(struct platform_device *pdev)
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index feebbd92aff..1427755c224 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -94,6 +94,16 @@ static void __mace_set_address(struct net_device *dev, void *addr);
  */
 static unsigned char *dummy_buf;
 
+static const struct net_device_ops mace_netdev_ops = {
+	.ndo_open		= mace_open,
+	.ndo_stop		= mace_close,
+	.ndo_start_xmit		= mace_xmit_start,
+	.ndo_set_multicast_list	= mace_set_multicast,
+	.ndo_set_mac_address	= mace_set_address,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
 {
 	struct device_node *mace = macio_get_of_node(mdev);
@@ -207,11 +217,7 @@ static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_i
 		}
 	}
 
-	dev->open = mace_open;
-	dev->stop = mace_close;
-	dev->hard_start_xmit = mace_xmit_start;
-	dev->set_multicast_list = mace_set_multicast;
-	dev->set_mac_address = mace_set_address;
+	dev->netdev_ops = &mace_netdev_ops;
 
 	/*
 	 * Most of what is below could be moved to mace_open()
@@ -541,7 +547,7 @@ static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev)
 	netif_stop_queue(dev);
 	mp->tx_fullup = 1;
 	spin_unlock_irqrestore(&mp->lock, flags);
-	return 1;		/* can't take it at the moment */
+	return NETDEV_TX_BUSY;		/* can't take it at the moment */
     }
     spin_unlock_irqrestore(&mp->lock, flags);
 
diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c
index 274e99bb63a..44f3c2896f2 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/macmace.c
@@ -180,6 +180,17 @@ static void mace_dma_off(struct net_device *dev)
 	psc_write_word(PSC_ENETWR_CMD + PSC_SET1, 0x1100);
 }
 
+static const struct net_device_ops mace_netdev_ops = {
+	.ndo_open		= mace_open,
+	.ndo_stop		= mace_close,
+	.ndo_start_xmit		= mace_xmit_start,
+	.ndo_tx_timeout		= mace_tx_timeout,
+	.ndo_set_multicast_list	= mace_set_multicast,
+	.ndo_set_mac_address	= mace_set_address,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*
  * Not really much of a probe. The hardware table tells us if this
  * model of Macintrash has a MACE (AV macintoshes)
@@ -240,13 +251,8 @@ static int __devinit mace_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	dev->open		= mace_open;
-	dev->stop		= mace_close;
-	dev->hard_start_xmit	= mace_xmit_start;
-	dev->tx_timeout		= mace_tx_timeout;
+	dev->netdev_ops		= &mace_netdev_ops;
 	dev->watchdog_timeo	= TX_TIMEOUT;
-	dev->set_multicast_list	= mace_set_multicast;
-	dev->set_mac_address	= mace_set_address;
 
 	printk(KERN_INFO "%s: 68K MACE, hardware address %pM\n",
 	       dev->name, dev->dev_addr);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 214a8cf2b70..99eed9f37c8 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -232,7 +232,7 @@ static int macvlan_open(struct net_device *dev)
 	if (macvlan_addr_busy(vlan->port, dev->dev_addr))
 		goto out;
 
-	err = dev_unicast_add(lowerdev, dev->dev_addr, ETH_ALEN);
+	err = dev_unicast_add(lowerdev, dev->dev_addr);
 	if (err < 0)
 		goto out;
 	if (dev->flags & IFF_ALLMULTI) {
@@ -244,7 +244,7 @@ static int macvlan_open(struct net_device *dev)
 	return 0;
 
 del_unicast:
-	dev_unicast_delete(lowerdev, dev->dev_addr, ETH_ALEN);
+	dev_unicast_delete(lowerdev, dev->dev_addr);
 out:
 	return err;
 }
@@ -258,7 +258,7 @@ static int macvlan_stop(struct net_device *dev)
 	if (dev->flags & IFF_ALLMULTI)
 		dev_set_allmulti(lowerdev, -1);
 
-	dev_unicast_delete(lowerdev, dev->dev_addr, ETH_ALEN);
+	dev_unicast_delete(lowerdev, dev->dev_addr);
 
 	macvlan_hash_del(vlan);
 	return 0;
@@ -282,10 +282,11 @@ static int macvlan_set_mac_address(struct net_device *dev, void *p)
 		if (macvlan_addr_busy(vlan->port, addr->sa_data))
 			return -EBUSY;
 
-		if ((err = dev_unicast_add(lowerdev, addr->sa_data, ETH_ALEN)))
+		err = dev_unicast_add(lowerdev, addr->sa_data);
+		if (err)
 			return err;
 
-		dev_unicast_delete(lowerdev, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(lowerdev, dev->dev_addr);
 
 		macvlan_hash_change_addr(vlan, addr->sa_data);
 	}
@@ -358,6 +359,7 @@ static int macvlan_init(struct net_device *dev)
 				  (lowerdev->state & MACVLAN_STATE_MASK);
 	dev->features 		= lowerdev->features & MACVLAN_FEATURES;
 	dev->iflink		= lowerdev->ifindex;
+	dev->hard_header_len	= lowerdev->hard_header_len;
 
 	macvlan_set_lockdep_class(dev);
 
@@ -374,36 +376,20 @@ static void macvlan_ethtool_get_drvinfo(struct net_device *dev,
 static u32 macvlan_ethtool_get_rx_csum(struct net_device *dev)
 {
 	const struct macvlan_dev *vlan = netdev_priv(dev);
-	struct net_device *lowerdev = vlan->lowerdev;
-
-	if (lowerdev->ethtool_ops == NULL ||
-	    lowerdev->ethtool_ops->get_rx_csum == NULL)
-		return 0;
-	return lowerdev->ethtool_ops->get_rx_csum(lowerdev);
+	return dev_ethtool_get_rx_csum(vlan->lowerdev);
 }
 
 static int macvlan_ethtool_get_settings(struct net_device *dev,
 					struct ethtool_cmd *cmd)
 {
 	const struct macvlan_dev *vlan = netdev_priv(dev);
-	struct net_device *lowerdev = vlan->lowerdev;
-
-	if (!lowerdev->ethtool_ops ||
-	    !lowerdev->ethtool_ops->get_settings)
-		return -EOPNOTSUPP;
-
-	return lowerdev->ethtool_ops->get_settings(lowerdev, cmd);
+	return dev_ethtool_get_settings(vlan->lowerdev, cmd);
 }
 
 static u32 macvlan_ethtool_get_flags(struct net_device *dev)
 {
 	const struct macvlan_dev *vlan = netdev_priv(dev);
-	struct net_device *lowerdev = vlan->lowerdev;
-
-	if (!lowerdev->ethtool_ops ||
-	    !lowerdev->ethtool_ops->get_flags)
-		return 0;
-	return lowerdev->ethtool_ops->get_flags(lowerdev);
+	return dev_ethtool_get_flags(vlan->lowerdev);
 }
 
 static const struct ethtool_ops macvlan_ethtool_ops = {
@@ -430,6 +416,7 @@ static void macvlan_setup(struct net_device *dev)
 {
 	ether_setup(dev);
 
+	dev->priv_flags	       &= ~IFF_XMIT_DST_RELEASE;
 	dev->netdev_ops		= &macvlan_netdev_ops;
 	dev->destructor		= free_netdev;
 	dev->header_ops		= &macvlan_hard_header_ops,
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
new file mode 100644
index 00000000000..dc45e9856c3
--- /dev/null
+++ b/drivers/net/mdio.c
@@ -0,0 +1,431 @@
+/*
+ * mdio.c: Generic support for MDIO-compatible transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/kernel.h>
+#include <linux/capability.h>
+#include <linux/errno.h>
+#include <linux/ethtool.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+
+/**
+ * mdio45_probe - probe for an MDIO (clause 45) device
+ * @mdio: MDIO interface
+ * @prtad: Expected PHY address
+ *
+ * This sets @prtad and @mmds in the MDIO interface if successful.
+ * Returns 0 on success, negative on error.
+ */
+int mdio45_probe(struct mdio_if_info *mdio, int prtad)
+{
+	int mmd, stat2, devs1, devs2;
+
+	/* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY
+	 * XS or DTE XS; give up if none is present. */
+	for (mmd = 1; mmd <= 5; mmd++) {
+		/* Is this MMD present? */
+		stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2);
+		if (stat2 < 0 ||
+		    (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL)
+			continue;
+
+		/* It should tell us about all the other MMDs */
+		devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1);
+		devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2);
+		if (devs1 < 0 || devs2 < 0)
+			continue;
+
+		mdio->prtad = prtad;
+		mdio->mmds = devs1 | (devs2 << 16);
+		return 0;
+	}
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(mdio45_probe);
+
+/**
+ * mdio_set_flag - set or clear flag in an MDIO register
+ * @mdio: MDIO interface
+ * @prtad: PHY address
+ * @devad: MMD address
+ * @addr: Register address
+ * @mask: Mask for flag (single bit set)
+ * @sense: New value of flag
+ *
+ * This debounces changes: it does not write the register if the flag
+ * already has the proper value.  Returns 0 on success, negative on error.
+ */
+int mdio_set_flag(const struct mdio_if_info *mdio,
+		  int prtad, int devad, u16 addr, int mask,
+		  bool sense)
+{
+	int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr);
+	int new_val;
+
+	if (old_val < 0)
+		return old_val;
+	if (sense)
+		new_val = old_val | mask;
+	else
+		new_val = old_val & ~mask;
+	if (old_val == new_val)
+		return 0;
+	return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val);
+}
+EXPORT_SYMBOL(mdio_set_flag);
+
+/**
+ * mdio_link_ok - is link status up/OK
+ * @mdio: MDIO interface
+ * @mmd_mask: Mask for MMDs to check
+ *
+ * Returns 1 if the PHY reports link status up/OK, 0 otherwise.
+ * @mmd_mask is normally @mdio->mmds, but if loopback is enabled
+ * the MMDs being bypassed should be excluded from the mask.
+ */
+int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask)
+{
+	int devad, reg;
+
+	if (!mmd_mask) {
+		/* Use absence of XGMII faults in lieu of link state */
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad,
+				      MDIO_MMD_PHYXS, MDIO_STAT2);
+		return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT);
+	}
+
+	for (devad = 0; mmd_mask; devad++) {
+		if (mmd_mask & (1 << devad)) {
+			mmd_mask &= ~(1 << devad);
+
+			/* Read twice because link state is latched and a
+			 * read moves the current state into the register */
+			mdio->mdio_read(mdio->dev, mdio->prtad,
+					devad, MDIO_STAT1);
+			reg = mdio->mdio_read(mdio->dev, mdio->prtad,
+					      devad, MDIO_STAT1);
+			if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+				return false;
+		}
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(mdio45_links_ok);
+
+/**
+ * mdio45_nway_restart - restart auto-negotiation for this interface
+ * @mdio: MDIO interface
+ *
+ * Returns 0 on success, negative on error.
+ */
+int mdio45_nway_restart(const struct mdio_if_info *mdio)
+{
+	if (!(mdio->mmds & MDIO_DEVS_AN))
+		return -EOPNOTSUPP;
+
+	mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1,
+		      MDIO_AN_CTRL1_RESTART, true);
+	return 0;
+}
+EXPORT_SYMBOL(mdio45_nway_restart);
+
+static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr)
+{
+	u32 result = 0;
+	int reg;
+
+	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr);
+	if (reg & ADVERTISE_10HALF)
+		result |= ADVERTISED_10baseT_Half;
+	if (reg & ADVERTISE_10FULL)
+		result |= ADVERTISED_10baseT_Full;
+	if (reg & ADVERTISE_100HALF)
+		result |= ADVERTISED_100baseT_Half;
+	if (reg & ADVERTISE_100FULL)
+		result |= ADVERTISED_100baseT_Full;
+	return result;
+}
+
+/**
+ * mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET
+ * @mdio: MDIO interface
+ * @ecmd: Ethtool request structure
+ * @npage_adv: Modes currently advertised on next pages
+ * @npage_lpa: Modes advertised by link partner on next pages
+ *
+ * Since the CSRs for auto-negotiation using next pages are not fully
+ * standardised, this function does not attempt to decode them.  The
+ * caller must pass them in.
+ */
+void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
+			       struct ethtool_cmd *ecmd,
+			       u32 npage_adv, u32 npage_lpa)
+{
+	int reg;
+
+	ecmd->transceiver = XCVR_INTERNAL;
+	ecmd->phy_address = mdio->prtad;
+	ecmd->mdio_support =
+		mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22);
+
+	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+			      MDIO_CTRL2);
+	switch (reg & MDIO_PMA_CTRL2_TYPE) {
+	case MDIO_PMA_CTRL2_10GBT:
+	case MDIO_PMA_CTRL2_1000BT:
+	case MDIO_PMA_CTRL2_100BTX:
+	case MDIO_PMA_CTRL2_10BT:
+		ecmd->port = PORT_TP;
+		ecmd->supported = SUPPORTED_TP;
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+				      MDIO_SPEED);
+		if (reg & MDIO_SPEED_10G)
+			ecmd->supported |= SUPPORTED_10000baseT_Full;
+		if (reg & MDIO_PMA_SPEED_1000)
+			ecmd->supported |= (SUPPORTED_1000baseT_Full |
+					    SUPPORTED_1000baseT_Half);
+		if (reg & MDIO_PMA_SPEED_100)
+			ecmd->supported |= (SUPPORTED_100baseT_Full |
+					    SUPPORTED_100baseT_Half);
+		if (reg & MDIO_PMA_SPEED_10)
+			ecmd->supported |= (SUPPORTED_10baseT_Full |
+					    SUPPORTED_10baseT_Half);
+		ecmd->advertising = ADVERTISED_TP;
+		break;
+
+	case MDIO_PMA_CTRL2_10GBCX4:
+		ecmd->port = PORT_OTHER;
+		ecmd->supported = 0;
+		ecmd->advertising = 0;
+		break;
+
+	case MDIO_PMA_CTRL2_10GBKX4:
+	case MDIO_PMA_CTRL2_10GBKR:
+	case MDIO_PMA_CTRL2_1000BKX:
+		ecmd->port = PORT_OTHER;
+		ecmd->supported = SUPPORTED_Backplane;
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+				      MDIO_PMA_EXTABLE);
+		if (reg & MDIO_PMA_EXTABLE_10GBKX4)
+			ecmd->supported |= SUPPORTED_10000baseKX4_Full;
+		if (reg & MDIO_PMA_EXTABLE_10GBKR)
+			ecmd->supported |= SUPPORTED_10000baseKR_Full;
+		if (reg & MDIO_PMA_EXTABLE_1000BKX)
+			ecmd->supported |= SUPPORTED_1000baseKX_Full;
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+				      MDIO_PMA_10GBR_FECABLE);
+		if (reg & MDIO_PMA_10GBR_FECABLE_ABLE)
+			ecmd->supported |= SUPPORTED_10000baseR_FEC;
+		ecmd->advertising = ADVERTISED_Backplane;
+		break;
+
+	/* All the other defined modes are flavours of optical */
+	default:
+		ecmd->port = PORT_FIBRE;
+		ecmd->supported = SUPPORTED_FIBRE;
+		ecmd->advertising = ADVERTISED_FIBRE;
+		break;
+	}
+
+	if (mdio->mmds & MDIO_DEVS_AN) {
+		ecmd->supported |= SUPPORTED_Autoneg;
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
+				      MDIO_CTRL1);
+		if (reg & MDIO_AN_CTRL1_ENABLE) {
+			ecmd->autoneg = AUTONEG_ENABLE;
+			ecmd->advertising |=
+				ADVERTISED_Autoneg |
+				mdio45_get_an(mdio, MDIO_AN_ADVERTISE) |
+				npage_adv;
+		} else {
+			ecmd->autoneg = AUTONEG_DISABLE;
+		}
+	} else {
+		ecmd->autoneg = AUTONEG_DISABLE;
+	}
+
+	if (ecmd->autoneg) {
+		u32 modes = 0;
+		int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad,
+					      MDIO_MMD_AN, MDIO_STAT1);
+
+		/* If AN is complete and successful, report best common
+		 * mode, otherwise report best advertised mode. */
+		if (an_stat & MDIO_AN_STAT1_COMPLETE) {
+			ecmd->lp_advertising =
+				mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa;
+			if (an_stat & MDIO_AN_STAT1_LPABLE)
+				ecmd->lp_advertising |= ADVERTISED_Autoneg;
+			modes = ecmd->advertising & ecmd->lp_advertising;
+		}
+		if ((modes & ~ADVERTISED_Autoneg) == 0)
+			modes = ecmd->advertising;
+
+		if (modes & (ADVERTISED_10000baseT_Full |
+			     ADVERTISED_10000baseKX4_Full |
+			     ADVERTISED_10000baseKR_Full)) {
+			ecmd->speed = SPEED_10000;
+			ecmd->duplex = DUPLEX_FULL;
+		} else if (modes & (ADVERTISED_1000baseT_Full |
+				    ADVERTISED_1000baseT_Half |
+				    ADVERTISED_1000baseKX_Full)) {
+			ecmd->speed = SPEED_1000;
+			ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half);
+		} else if (modes & (ADVERTISED_100baseT_Full |
+				    ADVERTISED_100baseT_Half)) {
+			ecmd->speed = SPEED_100;
+			ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
+		} else {
+			ecmd->speed = SPEED_10;
+			ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
+		}
+	} else {
+		/* Report forced settings */
+		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+				      MDIO_CTRL1);
+		ecmd->speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) *
+			       ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
+		ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX ||
+				ecmd->speed == SPEED_10000);
+	}
+
+	/* 10GBASE-T MDI/MDI-X */
+	if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) {
+		switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
+					MDIO_PMA_10GBT_SWAPPOL)) {
+		case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
+			ecmd->eth_tp_mdix = ETH_TP_MDI;
+			break;
+		case 0:
+			ecmd->eth_tp_mdix = ETH_TP_MDI_X;
+			break;
+		default:
+			/* It's complicated... */
+			ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL(mdio45_ethtool_gset_npage);
+
+/**
+ * mdio45_ethtool_spauseparam_an - set auto-negotiated pause parameters
+ * @mdio: MDIO interface
+ * @ecmd: Ethtool request structure
+ *
+ * This function assumes that the PHY has an auto-negotiation MMD.  It
+ * will enable and disable advertising of flow control as appropriate.
+ */
+void mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
+				   const struct ethtool_pauseparam *ecmd)
+{
+	int adv, old_adv;
+
+	WARN_ON(!(mdio->mmds & MDIO_DEVS_AN));
+
+	old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
+				  MDIO_AN_ADVERTISE);
+	adv = old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
+	if (ecmd->autoneg)
+		adv |= mii_advertise_flowctrl(
+			(ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
+			(ecmd->tx_pause ? FLOW_CTRL_TX : 0));
+	if (adv != old_adv) {
+		mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN,
+				 MDIO_AN_ADVERTISE, adv);
+		mdio45_nway_restart(mdio);
+	}
+}
+EXPORT_SYMBOL(mdio45_ethtool_spauseparam_an);
+
+/**
+ * mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs
+ * @mdio: MDIO interface
+ * @mii_data: MII ioctl data structure
+ * @cmd: MII ioctl command
+ *
+ * Returns 0 on success, negative on error.
+ */
+int mdio_mii_ioctl(const struct mdio_if_info *mdio,
+		   struct mii_ioctl_data *mii_data, int cmd)
+{
+	int prtad, devad;
+	u16 addr = mii_data->reg_num;
+
+	/* Validate/convert cmd to one of SIOC{G,S}MIIREG */
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		if (mdio->prtad == MDIO_PRTAD_NONE)
+			return -EOPNOTSUPP;
+		mii_data->phy_id = mdio->prtad;
+		cmd = SIOCGMIIREG;
+		break;
+	case SIOCGMIIREG:
+		break;
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	/* Validate/convert phy_id */
+	if ((mdio->mode_support & MDIO_SUPPORTS_C45) &&
+	    mdio_phy_id_is_c45(mii_data->phy_id)) {
+		prtad = mdio_phy_id_prtad(mii_data->phy_id);
+		devad = mdio_phy_id_devad(mii_data->phy_id);
+	} else if ((mdio->mode_support & MDIO_SUPPORTS_C22) &&
+		   mii_data->phy_id < 0x20) {
+		prtad = mii_data->phy_id;
+		devad = MDIO_DEVAD_NONE;
+		addr &= 0x1f;
+	} else if ((mdio->mode_support & MDIO_EMULATE_C22) &&
+		   mdio->prtad != MDIO_PRTAD_NONE &&
+		   mii_data->phy_id == mdio->prtad) {
+		/* Remap commonly-used MII registers. */
+		prtad = mdio->prtad;
+		switch (addr) {
+		case MII_BMCR:
+		case MII_BMSR:
+		case MII_PHYSID1:
+		case MII_PHYSID2:
+			devad = __ffs(mdio->mmds);
+			break;
+		case MII_ADVERTISE:
+		case MII_LPA:
+			if (!(mdio->mmds & MDIO_DEVS_AN))
+				return -EINVAL;
+			devad = MDIO_MMD_AN;
+			if (addr == MII_ADVERTISE)
+				addr = MDIO_AN_ADVERTISE;
+			else
+				addr = MDIO_AN_LPA;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	if (cmd == SIOCGMIIREG) {
+		int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr);
+		if (rc < 0)
+			return rc;
+		mii_data->val_out = rc;
+		return 0;
+	} else {
+		return mdio->mdio_write(mdio->dev, prtad, devad, addr,
+					mii_data->val_in);
+	}
+}
+EXPORT_SYMBOL(mdio_mii_ioctl);
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index dbd3436912b..5d04d94f2a2 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -770,9 +770,17 @@ static int meth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	}
 }
 
-/*
- * Return statistics to the caller
- */
+static const struct net_device_ops meth_netdev_ops = {
+	.ndo_open		= meth_open,
+	.ndo_stop		= meth_release,
+	.ndo_start_xmit		= meth_tx,
+	.ndo_do_ioctl		= meth_ioctl,
+	.ndo_tx_timeout		= meth_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 /*
  * The init function.
  */
@@ -786,16 +794,10 @@ static int __init meth_probe(struct platform_device *pdev)
 	if (!dev)
 		return -ENOMEM;
 
-	dev->open            = meth_open;
-	dev->stop            = meth_release;
-	dev->hard_start_xmit = meth_tx;
-	dev->do_ioctl        = meth_ioctl;
-#ifdef HAVE_TX_TIMEOUT
-	dev->tx_timeout      = meth_tx_timeout;
-	dev->watchdog_timeo  = timeout;
-#endif
-	dev->irq	     = MACE_ETHERNET_IRQ;
-	dev->base_addr	     = (unsigned long)&mace->eth;
+	dev->netdev_ops		= &meth_netdev_ops;
+	dev->watchdog_timeo	= timeout;
+	dev->irq		= MACE_ETHERNET_IRQ;
+	dev->base_addr		= (unsigned long)&mace->eth;
 	memcpy(dev->dev_addr, o2meth_eaddr, 6);
 
 	priv = netdev_priv(dev);
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index 92056051f26..d81a5d22a3a 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -31,7 +31,27 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
+
+static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
+{
+	u32 result = 0;
+	int advert;
+
+	advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
+	if (advert & LPA_LPACK)
+		result |= ADVERTISED_Autoneg;
+	if (advert & ADVERTISE_10HALF)
+		result |= ADVERTISED_10baseT_Half;
+	if (advert & ADVERTISE_10FULL)
+		result |= ADVERTISED_10baseT_Full;
+	if (advert & ADVERTISE_100HALF)
+		result |= ADVERTISED_100baseT_Half;
+	if (advert & ADVERTISE_100FULL)
+		result |= ADVERTISED_100baseT_Full;
+
+	return result;
+}
 
 /**
  * mii_ethtool_gset - get settings that are specified in @ecmd
@@ -43,8 +63,8 @@
 int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 {
 	struct net_device *dev = mii->dev;
-	u32 advert, bmcr, lpa, nego;
-	u32 advert2 = 0, bmcr2 = 0, lpa2 = 0;
+	u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
+	u32 nego;
 
 	ecmd->supported =
 	    (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
@@ -62,50 +82,51 @@ int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 
 	/* this isn't fully supported at higher layers */
 	ecmd->phy_address = mii->phy_id;
+	ecmd->mdio_support = MDIO_SUPPORTS_C22;
 
 	ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
-	advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
-	if (mii->supports_gmii)
-		advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
-
-	if (advert & ADVERTISE_10HALF)
-		ecmd->advertising |= ADVERTISED_10baseT_Half;
-	if (advert & ADVERTISE_10FULL)
-		ecmd->advertising |= ADVERTISED_10baseT_Full;
-	if (advert & ADVERTISE_100HALF)
-		ecmd->advertising |= ADVERTISED_100baseT_Half;
-	if (advert & ADVERTISE_100FULL)
-		ecmd->advertising |= ADVERTISED_100baseT_Full;
-	if (advert2 & ADVERTISE_1000HALF)
-		ecmd->advertising |= ADVERTISED_1000baseT_Half;
-	if (advert2 & ADVERTISE_1000FULL)
-		ecmd->advertising |= ADVERTISED_1000baseT_Full;
 
 	bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
-	lpa = mii->mdio_read(dev, mii->phy_id, MII_LPA);
+	bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
 	if (mii->supports_gmii) {
-		bmcr2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
-		lpa2 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
+ 		ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
+		stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
 	}
 	if (bmcr & BMCR_ANENABLE) {
 		ecmd->advertising |= ADVERTISED_Autoneg;
 		ecmd->autoneg = AUTONEG_ENABLE;
 
-		nego = mii_nway_result(advert & lpa);
-		if ((bmcr2 & (ADVERTISE_1000HALF | ADVERTISE_1000FULL)) &
-		    (lpa2 >> 2))
+		ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);
+		if (ctrl1000 & ADVERTISE_1000HALF)
+			ecmd->advertising |= ADVERTISED_1000baseT_Half;
+		if (ctrl1000 & ADVERTISE_1000FULL)
+			ecmd->advertising |= ADVERTISED_1000baseT_Full;
+
+		if (bmsr & BMSR_ANEGCOMPLETE) {
+			ecmd->lp_advertising = mii_get_an(mii, MII_LPA);
+			if (stat1000 & LPA_1000HALF)
+				ecmd->lp_advertising |=
+					ADVERTISED_1000baseT_Half;
+			if (stat1000 & LPA_1000FULL)
+				ecmd->lp_advertising |=
+					ADVERTISED_1000baseT_Full;
+		} else {
+			ecmd->lp_advertising = 0;
+		}
+
+		nego = ecmd->advertising & ecmd->lp_advertising;
+
+		if (nego & (ADVERTISED_1000baseT_Full |
+			    ADVERTISED_1000baseT_Half)) {
 			ecmd->speed = SPEED_1000;
-		else if (nego == LPA_100FULL || nego == LPA_100HALF)
+			ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
+		} else if (nego & (ADVERTISED_100baseT_Full |
+				   ADVERTISED_100baseT_Half)) {
 			ecmd->speed = SPEED_100;
-		else
-			ecmd->speed = SPEED_10;
-		if ((lpa2 & LPA_1000FULL) || nego == LPA_100FULL ||
-		    nego == LPA_10FULL) {
-			ecmd->duplex = DUPLEX_FULL;
-			mii->full_duplex = 1;
+			ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
 		} else {
-			ecmd->duplex = DUPLEX_HALF;
-			mii->full_duplex = 0;
+			ecmd->speed = SPEED_10;
+			ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
 		}
 	} else {
 		ecmd->autoneg = AUTONEG_DISABLE;
@@ -116,6 +137,8 @@ int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
 		ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 	}
 
+	mii->full_duplex = ecmd->duplex;
+
 	/* ignore maxtxpkt, maxrxpkt for now */
 
 	return 0;
diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index 664835b822f..b3b9a147d09 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c
@@ -237,6 +237,16 @@ static void mipsnet_set_mclist(struct net_device *dev)
 {
 }
 
+static const struct net_device_ops mipsnet_netdev_ops = {
+	.ndo_open		= mipsnet_open,
+	.ndo_stop		= mipsnet_close,
+	.ndo_start_xmit		= mipsnet_xmit,
+	.ndo_set_multicast_list	= mipsnet_set_mclist,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __init mipsnet_probe(struct platform_device *dev)
 {
 	struct net_device *netdev;
@@ -250,10 +260,7 @@ static int __init mipsnet_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, netdev);
 
-	netdev->open			= mipsnet_open;
-	netdev->stop			= mipsnet_close;
-	netdev->hard_start_xmit		= mipsnet_xmit;
-	netdev->set_multicast_list	= mipsnet_set_mclist;
+	netdev->netdev_ops = &mipsnet_netdev_ops;
 
 	/*
 	 * TODO: probe for these or load them from PARAM
diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile
index 21040a0d81f..1fd068e1d93 100644
--- a/drivers/net/mlx4/Makefile
+++ b/drivers/net/mlx4/Makefile
@@ -5,5 +5,5 @@ mlx4_core-y :=	alloc.o catas.o cmd.o cq.o eq.o fw.o icm.o intf.o main.o mcg.o \
 
 obj-$(CONFIG_MLX4_EN)               += mlx4_en.o
 
-mlx4_en-y := 	en_main.o en_tx.o en_rx.o en_params.o en_port.o en_cq.o \
+mlx4_en-y := 	en_main.o en_tx.o en_rx.o en_ethtool.o en_port.o en_cq.o \
 		en_resources.o en_netdev.o
diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c
index a276125b709..21786ad4455 100644
--- a/drivers/net/mlx4/en_cq.c
+++ b/drivers/net/mlx4/en_cq.c
@@ -89,6 +89,9 @@ int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
 	*cq->mcq.arm_db    = 0;
 	memset(cq->buf, 0, cq->buf_size);
 
+	if (!cq->is_tx)
+		cq->size = priv->rx_ring[cq->ring].actual_size;
+
 	err = mlx4_cq_alloc(mdev->dev, cq->size, &cq->wqres.mtt, &mdev->priv_uar,
 			    cq->wqres.db.dma, &cq->mcq, cq->vector, cq->is_tx);
 	if (err)
diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_ethtool.c
index c1bd040b9e0..091f99052c9 100644
--- a/drivers/net/mlx4/en_params.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -38,64 +38,6 @@
 #include "mlx4_en.h"
 #include "en_port.h"
 
-#define MLX4_EN_PARM_INT(X, def_val, desc) \
-	static unsigned int X = def_val;\
-	module_param(X , uint, 0444); \
-	MODULE_PARM_DESC(X, desc);
-
-
-/*
- * Device scope module parameters
- */
-
-
-/* Use a XOR rathern than Toeplitz hash function for RSS */
-MLX4_EN_PARM_INT(rss_xor, 0, "Use XOR hash function for RSS");
-
-/* RSS hash type mask - default to <saddr, daddr, sport, dport> */
-MLX4_EN_PARM_INT(rss_mask, 0xf, "RSS hash type bitmask");
-
-/* Number of LRO sessions per Rx ring (rounded up to a power of two) */
-MLX4_EN_PARM_INT(num_lro, MLX4_EN_MAX_LRO_DESCRIPTORS,
-		 "Number of LRO sessions per ring or disabled (0)");
-
-/* Priority pausing */
-MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
-			   " Per priority bit mask");
-MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
-			   " Per priority bit mask");
-
-int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
-{
-	struct mlx4_en_profile *params = &mdev->profile;
-	int i;
-
-	params->rss_xor = (rss_xor != 0);
-	params->rss_mask = rss_mask & 0x1f;
-	params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
-	for (i = 1; i <= MLX4_MAX_PORTS; i++) {
-		params->prof[i].rx_pause = 1;
-		params->prof[i].rx_ppp = pfcrx;
-		params->prof[i].tx_pause = 1;
-		params->prof[i].tx_ppp = pfctx;
-		params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
-		params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
-	}
-	if (pfcrx || pfctx) {
-		params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM;
-		params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM;
-	} else {
-		params->prof[1].tx_ring_num = 1;
-		params->prof[2].tx_ring_num = 1;
-	}
-
-	return 0;
-}
-
-
-/*
- * Ethtool support
- */
 
 static void mlx4_en_update_lro_stats(struct mlx4_en_priv *priv)
 {
@@ -326,8 +268,7 @@ static int mlx4_en_set_coalesce(struct net_device *dev,
 
 	priv->rx_frames = (coal->rx_max_coalesced_frames ==
 			   MLX4_EN_AUTO_CONF) ?
-				MLX4_EN_RX_COAL_TARGET /
-				priv->dev->mtu + 1 :
+				MLX4_EN_RX_COAL_TARGET :
 				coal->rx_max_coalesced_frames;
 	priv->rx_usecs = (coal->rx_coalesce_usecs ==
 			  MLX4_EN_AUTO_CONF) ?
@@ -371,7 +312,7 @@ static int mlx4_en_set_pauseparam(struct net_device *dev,
 				    priv->prof->rx_pause,
 				    priv->prof->rx_ppp);
 	if (err)
-		mlx4_err(mdev, "Failed setting pause params to\n");
+		en_err(priv, "Failed setting pause params\n");
 
 	return err;
 }
@@ -421,13 +362,13 @@ static int mlx4_en_set_ringparam(struct net_device *dev,
 
 	err = mlx4_en_alloc_resources(priv);
 	if (err) {
-		mlx4_err(mdev, "Failed reallocating port resources\n");
+		en_err(priv, "Failed reallocating port resources\n");
 		goto out;
 	}
 	if (port_up) {
 		err = mlx4_en_start_port(dev);
 		if (err)
-			mlx4_err(mdev, "Failed starting port\n");
+			en_err(priv, "Failed starting port\n");
 	}
 
 out:
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index 510633fd57f..9ed4a158f89 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -51,6 +51,55 @@ static const char mlx4_en_version[] =
 	DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v"
 	DRV_VERSION " (" DRV_RELDATE ")\n";
 
+#define MLX4_EN_PARM_INT(X, def_val, desc) \
+	static unsigned int X = def_val;\
+	module_param(X , uint, 0444); \
+	MODULE_PARM_DESC(X, desc);
+
+
+/*
+ * Device scope module parameters
+ */
+
+
+/* Use a XOR rathern than Toeplitz hash function for RSS */
+MLX4_EN_PARM_INT(rss_xor, 0, "Use XOR hash function for RSS");
+
+/* RSS hash type mask - default to <saddr, daddr, sport, dport> */
+MLX4_EN_PARM_INT(rss_mask, 0xf, "RSS hash type bitmask");
+
+/* Number of LRO sessions per Rx ring (rounded up to a power of two) */
+MLX4_EN_PARM_INT(num_lro, MLX4_EN_MAX_LRO_DESCRIPTORS,
+		 "Number of LRO sessions per ring or disabled (0)");
+
+/* Priority pausing */
+MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
+			   " Per priority bit mask");
+MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
+			   " Per priority bit mask");
+
+static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
+{
+	struct mlx4_en_profile *params = &mdev->profile;
+	int i;
+
+	params->rss_xor = (rss_xor != 0);
+	params->rss_mask = rss_mask & 0x1f;
+	params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
+	for (i = 1; i <= MLX4_MAX_PORTS; i++) {
+		params->prof[i].rx_pause = 1;
+		params->prof[i].rx_ppp = pfcrx;
+		params->prof[i].tx_pause = 1;
+		params->prof[i].tx_ppp = pfctx;
+		params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
+		params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
+		params->prof[i].tx_ring_num = MLX4_EN_NUM_TX_RINGS +
+			(!!pfcrx) * MLX4_EN_NUM_PPP_RINGS;
+	}
+
+	return 0;
+}
+
 static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
 			  enum mlx4_dev_event event, int port)
 {
@@ -194,28 +243,11 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
 	/* Create a netdev for each port */
 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
 		mlx4_info(mdev, "Activating port:%d\n", i);
-		if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i])) {
+		if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i]))
 			mdev->pndev[i] = NULL;
-			goto err_free_netdev;
-		}
 	}
 	return mdev;
 
-
-err_free_netdev:
-	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
-		if (mdev->pndev[i])
-			mlx4_en_destroy_netdev(mdev->pndev[i]);
-	}
-
-	mutex_lock(&mdev->state_lock);
-	mdev->device_up = false;
-	mutex_unlock(&mdev->state_lock);
-	flush_workqueue(mdev->workqueue);
-
-	/* Stop event queue before we drop down to release shared SW state */
-	destroy_workqueue(mdev->workqueue);
-
 err_mr:
 	mlx4_mr_free(dev, &mdev->mr);
 err_uar:
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 7bcc49de163..e02bafdd368 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -51,14 +51,14 @@ static void mlx4_en_vlan_rx_register(struct net_device *dev, struct vlan_group *
 	struct mlx4_en_dev *mdev = priv->mdev;
 	int err;
 
-	mlx4_dbg(HW, priv, "Registering VLAN group:%p\n", grp);
+	en_dbg(HW, priv, "Registering VLAN group:%p\n", grp);
 	priv->vlgrp = grp;
 
 	mutex_lock(&mdev->state_lock);
 	if (mdev->device_up && priv->port_up) {
 		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, grp);
 		if (err)
-			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+			en_err(priv, "Failed configuring VLAN filter\n");
 	}
 	mutex_unlock(&mdev->state_lock);
 }
@@ -72,15 +72,15 @@ static void mlx4_en_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 	if (!priv->vlgrp)
 		return;
 
-	mlx4_dbg(HW, priv, "adding VLAN:%d (vlgrp entry:%p)\n",
-		 vid, vlan_group_get_device(priv->vlgrp, vid));
+	en_dbg(HW, priv, "adding VLAN:%d (vlgrp entry:%p)\n",
+	       vid, vlan_group_get_device(priv->vlgrp, vid));
 
 	/* Add VID to port VLAN filter */
 	mutex_lock(&mdev->state_lock);
 	if (mdev->device_up && priv->port_up) {
 		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
 		if (err)
-			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+			en_err(priv, "Failed configuring VLAN filter\n");
 	}
 	mutex_unlock(&mdev->state_lock);
 }
@@ -94,9 +94,8 @@ static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 	if (!priv->vlgrp)
 		return;
 
-	mlx4_dbg(HW, priv, "Killing VID:%d (vlgrp:%p vlgrp "
-		 "entry:%p)\n", vid, priv->vlgrp,
-		 vlan_group_get_device(priv->vlgrp, vid));
+	en_dbg(HW, priv, "Killing VID:%d (vlgrp:%p vlgrp entry:%p)\n",
+	       vid, priv->vlgrp, vlan_group_get_device(priv->vlgrp, vid));
 	vlan_group_set_device(priv->vlgrp, vid, NULL);
 
 	/* Remove VID from port VLAN filter */
@@ -104,7 +103,7 @@ static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 	if (mdev->device_up && priv->port_up) {
 		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
 		if (err)
-			mlx4_err(mdev, "Failed configuring VLAN filter\n");
+			en_err(priv, "Failed configuring VLAN filter\n");
 	}
 	mutex_unlock(&mdev->state_lock);
 }
@@ -150,9 +149,10 @@ static void mlx4_en_do_set_mac(struct work_struct *work)
 		err = mlx4_register_mac(mdev->dev, priv->port,
 					priv->mac, &priv->mac_index);
 		if (err)
-			mlx4_err(mdev, "Failed changing HW MAC address\n");
+			en_err(priv, "Failed changing HW MAC address\n");
 	} else
-		mlx4_dbg(HW, priv, "Port is down, exiting...\n");
+		en_dbg(HW, priv, "Port is down while "
+				 "registering mac, exiting...\n");
 
 	mutex_unlock(&mdev->state_lock);
 }
@@ -174,7 +174,6 @@ static void mlx4_en_clear_list(struct net_device *dev)
 static void mlx4_en_cache_mclist(struct net_device *dev)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	struct dev_mc_list *mclist;
 	struct dev_mc_list *tmp;
 	struct dev_mc_list *plist = NULL;
@@ -182,7 +181,7 @@ static void mlx4_en_cache_mclist(struct net_device *dev)
 	for (mclist = dev->mc_list; mclist; mclist = mclist->next) {
 		tmp = kmalloc(sizeof(struct dev_mc_list), GFP_ATOMIC);
 		if (!tmp) {
-			mlx4_err(mdev, "failed to allocate multicast list\n");
+			en_err(priv, "failed to allocate multicast list\n");
 			mlx4_en_clear_list(dev);
 			return;
 		}
@@ -219,13 +218,13 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 
 	mutex_lock(&mdev->state_lock);
 	if (!mdev->device_up) {
-		mlx4_dbg(HW, priv, "Card is not up, ignoring "
-				   "multicast change.\n");
+		en_dbg(HW, priv, "Card is not up, "
+				 "ignoring multicast change.\n");
 		goto out;
 	}
 	if (!priv->port_up) {
-		mlx4_dbg(HW, priv, "Port is down, ignoring "
-				   "multicast change.\n");
+		en_dbg(HW, priv, "Port is down, "
+				 "ignoring  multicast change.\n");
 		goto out;
 	}
 
@@ -236,29 +235,27 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 	if (dev->flags & IFF_PROMISC) {
 		if (!(priv->flags & MLX4_EN_FLAG_PROMISC)) {
 			if (netif_msg_rx_status(priv))
-				mlx4_warn(mdev, "Port:%d entering promiscuous mode\n",
-					  priv->port);
+				en_warn(priv, "Entering promiscuous mode\n");
 			priv->flags |= MLX4_EN_FLAG_PROMISC;
 
 			/* Enable promiscouos mode */
 			err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port,
 						     priv->base_qpn, 1);
 			if (err)
-				mlx4_err(mdev, "Failed enabling "
-					 "promiscous mode\n");
+				en_err(priv, "Failed enabling "
+					     "promiscous mode\n");
 
 			/* Disable port multicast filter (unconditionally) */
 			err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
 						  0, MLX4_MCAST_DISABLE);
 			if (err)
-				mlx4_err(mdev, "Failed disabling "
-					 "multicast filter\n");
+				en_err(priv, "Failed disabling "
+					     "multicast filter\n");
 
 			/* Disable port VLAN filter */
 			err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, NULL);
 			if (err)
-				mlx4_err(mdev, "Failed disabling "
-					 "VLAN filter\n");
+				en_err(priv, "Failed disabling VLAN filter\n");
 		}
 		goto out;
 	}
@@ -269,20 +266,19 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 
 	if (priv->flags & MLX4_EN_FLAG_PROMISC) {
 		if (netif_msg_rx_status(priv))
-			mlx4_warn(mdev, "Port:%d leaving promiscuous mode\n",
-				  priv->port);
+			en_warn(priv, "Leaving promiscuous mode\n");
 		priv->flags &= ~MLX4_EN_FLAG_PROMISC;
 
 		/* Disable promiscouos mode */
 		err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port,
 					     priv->base_qpn, 0);
 		if (err)
-			mlx4_err(mdev, "Failed disabling promiscous mode\n");
+			en_err(priv, "Failed disabling promiscous mode\n");
 
 		/* Enable port VLAN filter */
 		err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp);
 		if (err)
-			mlx4_err(mdev, "Failed enabling VLAN filter\n");
+			en_err(priv, "Failed enabling VLAN filter\n");
 	}
 
 	/* Enable/disable the multicast filter according to IFF_ALLMULTI */
@@ -290,12 +286,12 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
 					  0, MLX4_MCAST_DISABLE);
 		if (err)
-			mlx4_err(mdev, "Failed disabling multicast filter\n");
+			en_err(priv, "Failed disabling multicast filter\n");
 	} else {
 		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
 					  0, MLX4_MCAST_DISABLE);
 		if (err)
-			mlx4_err(mdev, "Failed disabling multicast filter\n");
+			en_err(priv, "Failed disabling multicast filter\n");
 
 		/* Flush mcast filter and init it with broadcast address */
 		mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, ETH_BCAST,
@@ -314,7 +310,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
 		err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
 					  0, MLX4_MCAST_ENABLE);
 		if (err)
-			mlx4_err(mdev, "Failed enabling multicast filter\n");
+			en_err(priv, "Failed enabling multicast filter\n");
 
 		mlx4_en_clear_list(dev);
 	}
@@ -346,10 +342,10 @@ static void mlx4_en_tx_timeout(struct net_device *dev)
 	struct mlx4_en_dev *mdev = priv->mdev;
 
 	if (netif_msg_timer(priv))
-		mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port);
+		en_warn(priv, "Tx timeout called on port:%d\n", priv->port);
 
 	priv->port_stats.tx_timeout++;
-	mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
+	en_dbg(DRV, priv, "Scheduling watchdog\n");
 	queue_work(mdev->workqueue, &priv->watchdog_task);
 }
 
@@ -371,15 +367,15 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
 	int i;
 
 	/* If we haven't received a specific coalescing setting
-	 * (module param), we set the moderation paramters as follows:
+	 * (module param), we set the moderation parameters as follows:
 	 * - moder_cnt is set to the number of mtu sized packets to
 	 *   satisfy our coelsing target.
 	 * - moder_time is set to a fixed value.
 	 */
-	priv->rx_frames = MLX4_EN_RX_COAL_TARGET / priv->dev->mtu + 1;
+	priv->rx_frames = MLX4_EN_RX_COAL_TARGET;
 	priv->rx_usecs = MLX4_EN_RX_COAL_TIME;
-	mlx4_dbg(INTR, priv, "Default coalesing params for mtu:%d - "
-			     "rx_frames:%d rx_usecs:%d\n",
+	en_dbg(INTR, priv, "Default coalesing params for mtu:%d - "
+			   "rx_frames:%d rx_usecs:%d\n",
 		 priv->dev->mtu, priv->rx_frames, priv->rx_usecs);
 
 	/* Setup cq moderation params */
@@ -412,7 +408,6 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
 static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv)
 {
 	unsigned long period = (unsigned long) (jiffies - priv->last_moder_jiffies);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_en_cq *cq;
 	unsigned long packets;
 	unsigned long rate;
@@ -472,11 +467,11 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv)
 		moder_time = priv->rx_usecs;
 	}
 
-	mlx4_dbg(INTR, priv, "tx rate:%lu rx_rate:%lu\n",
-		 tx_pkt_diff * HZ / period, rx_pkt_diff * HZ / period);
+	en_dbg(INTR, priv, "tx rate:%lu rx_rate:%lu\n",
+	       tx_pkt_diff * HZ / period, rx_pkt_diff * HZ / period);
 
-	mlx4_dbg(INTR, priv, "Rx moder_time changed from:%d to %d period:%lu "
-		 "[jiff] packets:%lu avg_pkt_size:%lu rate:%lu [p/s])\n",
+	en_dbg(INTR, priv, "Rx moder_time changed from:%d to %d period:%lu "
+	       "[jiff] packets:%lu avg_pkt_size:%lu rate:%lu [p/s])\n",
 		 priv->last_moder_time, moder_time, period, packets,
 		 avg_pkt_size, rate);
 
@@ -487,8 +482,7 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv)
 			cq->moder_time = moder_time;
 			err = mlx4_en_set_cq_moder(priv, cq);
 			if (err) {
-				mlx4_err(mdev, "Failed modifying moderation for cq:%d "
-					 "on port:%d\n", i, priv->port);
+				en_err(priv, "Failed modifying moderation for cq:%d\n", i);
 				break;
 			}
 		}
@@ -511,8 +505,7 @@ static void mlx4_en_do_get_stats(struct work_struct *work)
 
 	err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0);
 	if (err)
-		mlx4_dbg(HW, priv, "Could not update stats for "
-				   "port:%d\n", priv->port);
+		en_dbg(HW, priv, "Could not update stats \n");
 
 	mutex_lock(&mdev->state_lock);
 	if (mdev->device_up) {
@@ -536,12 +529,10 @@ static void mlx4_en_linkstate(struct work_struct *work)
 	 * report to system log */
 	if (priv->last_link_state != linkstate) {
 		if (linkstate == MLX4_DEV_EVENT_PORT_DOWN) {
-			if (netif_msg_link(priv))
-				mlx4_info(mdev, "Port %d - link down\n", priv->port);
+			en_dbg(LINK, priv, "Link Down\n");
 			netif_carrier_off(priv->dev);
 		} else {
-			if (netif_msg_link(priv))
-				mlx4_info(mdev, "Port %d - link up\n", priv->port);
+			en_dbg(LINK, priv, "Link Up\n");
 			netif_carrier_on(priv->dev);
 		}
 	}
@@ -556,58 +547,53 @@ int mlx4_en_start_port(struct net_device *dev)
 	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_en_cq *cq;
 	struct mlx4_en_tx_ring *tx_ring;
-	struct mlx4_en_rx_ring *rx_ring;
 	int rx_index = 0;
 	int tx_index = 0;
-	u16 stride;
 	int err = 0;
 	int i;
 	int j;
 
 	if (priv->port_up) {
-		mlx4_dbg(DRV, priv, "start port called while port already up\n");
+		en_dbg(DRV, priv, "start port called while port already up\n");
 		return 0;
 	}
 
 	/* Calculate Rx buf size */
 	dev->mtu = min(dev->mtu, priv->max_mtu);
 	mlx4_en_calc_rx_buf(dev);
-	mlx4_dbg(DRV, priv, "Rx buf size:%d\n", priv->rx_skb_size);
-	stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) +
-				    DS_SIZE * priv->num_frags);
+	en_dbg(DRV, priv, "Rx buf size:%d\n", priv->rx_skb_size);
+
 	/* Configure rx cq's and rings */
+	err = mlx4_en_activate_rx_rings(priv);
+	if (err) {
+		en_err(priv, "Failed to activate RX rings\n");
+		return err;
+	}
 	for (i = 0; i < priv->rx_ring_num; i++) {
 		cq = &priv->rx_cq[i];
-		rx_ring = &priv->rx_ring[i];
 
 		err = mlx4_en_activate_cq(priv, cq);
 		if (err) {
-			mlx4_err(mdev, "Failed activating Rx CQ\n");
+			en_err(priv, "Failed activating Rx CQ\n");
 			goto cq_err;
 		}
 		for (j = 0; j < cq->size; j++)
 			cq->buf[j].owner_sr_opcode = MLX4_CQE_OWNER_MASK;
 		err = mlx4_en_set_cq_moder(priv, cq);
 		if (err) {
-			mlx4_err(mdev, "Failed setting cq moderation parameters");
+			en_err(priv, "Failed setting cq moderation parameters");
 			mlx4_en_deactivate_cq(priv, cq);
 			goto cq_err;
 		}
 		mlx4_en_arm_cq(priv, cq);
-
+		priv->rx_ring[i].cqn = cq->mcq.cqn;
 		++rx_index;
 	}
 
-	err = mlx4_en_activate_rx_rings(priv);
-	if (err) {
-		mlx4_err(mdev, "Failed to activate RX rings\n");
-		goto cq_err;
-	}
-
 	err = mlx4_en_config_rss_steer(priv);
 	if (err) {
-		mlx4_err(mdev, "Failed configuring rss steering\n");
-		goto rx_err;
+		en_err(priv, "Failed configuring rss steering\n");
+		goto cq_err;
 	}
 
 	/* Configure tx cq's and rings */
@@ -616,16 +602,16 @@ int mlx4_en_start_port(struct net_device *dev)
 		cq = &priv->tx_cq[i];
 		err = mlx4_en_activate_cq(priv, cq);
 		if (err) {
-			mlx4_err(mdev, "Failed allocating Tx CQ\n");
+			en_err(priv, "Failed allocating Tx CQ\n");
 			goto tx_err;
 		}
 		err = mlx4_en_set_cq_moder(priv, cq);
 		if (err) {
-			mlx4_err(mdev, "Failed setting cq moderation parameters");
+			en_err(priv, "Failed setting cq moderation parameters");
 			mlx4_en_deactivate_cq(priv, cq);
 			goto tx_err;
 		}
-		mlx4_dbg(DRV, priv, "Resetting index of collapsed CQ:%d to -1\n", i);
+		en_dbg(DRV, priv, "Resetting index of collapsed CQ:%d to -1\n", i);
 		cq->buf->wqe_index = cpu_to_be16(0xffff);
 
 		/* Configure ring */
@@ -633,7 +619,7 @@ int mlx4_en_start_port(struct net_device *dev)
 		err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn,
 					       priv->rx_ring[0].srq.srqn);
 		if (err) {
-			mlx4_err(mdev, "Failed allocating Tx ring\n");
+			en_err(priv, "Failed allocating Tx ring\n");
 			mlx4_en_deactivate_cq(priv, cq);
 			goto tx_err;
 		}
@@ -651,30 +637,30 @@ int mlx4_en_start_port(struct net_device *dev)
 				    priv->prof->rx_pause,
 				    priv->prof->rx_ppp);
 	if (err) {
-		mlx4_err(mdev, "Failed setting port general configurations"
-			       " for port %d, with error %d\n", priv->port, err);
+		en_err(priv, "Failed setting port general configurations "
+			     "for port %d, with error %d\n", priv->port, err);
 		goto tx_err;
 	}
 	/* Set default qp number */
 	err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, priv->base_qpn, 0);
 	if (err) {
-		mlx4_err(mdev, "Failed setting default qp numbers\n");
+		en_err(priv, "Failed setting default qp numbers\n");
 		goto tx_err;
 	}
 	/* Set port mac number */
-	mlx4_dbg(DRV, priv, "Setting mac for port %d\n", priv->port);
+	en_dbg(DRV, priv, "Setting mac for port %d\n", priv->port);
 	err = mlx4_register_mac(mdev->dev, priv->port,
 				priv->mac, &priv->mac_index);
 	if (err) {
-		mlx4_err(mdev, "Failed setting port mac\n");
+		en_err(priv, "Failed setting port mac\n");
 		goto tx_err;
 	}
 
 	/* Init port */
-	mlx4_dbg(HW, priv, "Initializing port\n");
+	en_dbg(HW, priv, "Initializing port\n");
 	err = mlx4_INIT_PORT(mdev->dev, priv->port);
 	if (err) {
-		mlx4_err(mdev, "Failed Initializing port\n");
+		en_err(priv, "Failed Initializing port\n");
 		goto mac_err;
 	}
 
@@ -694,12 +680,11 @@ tx_err:
 	}
 
 	mlx4_en_release_rss_steer(priv);
-rx_err:
-	for (i = 0; i < priv->rx_ring_num; i++)
-		mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
 cq_err:
 	while (rx_index--)
 		mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]);
+	for (i = 0; i < priv->rx_ring_num; i++)
+		mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
 
 	return err; /* need to close devices */
 }
@@ -712,8 +697,7 @@ void mlx4_en_stop_port(struct net_device *dev)
 	int i;
 
 	if (!priv->port_up) {
-		mlx4_dbg(DRV, priv, "stop port (%d) called while port already down\n",
-			 priv->port);
+		en_dbg(DRV, priv, "stop port called while port already down\n");
 		return;
 	}
 	netif_stop_queue(dev);
@@ -758,13 +742,13 @@ static void mlx4_en_restart(struct work_struct *work)
 	struct mlx4_en_dev *mdev = priv->mdev;
 	struct net_device *dev = priv->dev;
 
-	mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port);
+	en_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port);
 
 	mutex_lock(&mdev->state_lock);
 	if (priv->port_up) {
 		mlx4_en_stop_port(dev);
 		if (mlx4_en_start_port(dev))
-			mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+			en_err(priv, "Failed restarting port %d\n", priv->port);
 	}
 	mutex_unlock(&mdev->state_lock);
 }
@@ -780,14 +764,14 @@ static int mlx4_en_open(struct net_device *dev)
 	mutex_lock(&mdev->state_lock);
 
 	if (!mdev->device_up) {
-		mlx4_err(mdev, "Cannot open - device down/disabled\n");
+		en_err(priv, "Cannot open - device down/disabled\n");
 		err = -EBUSY;
 		goto out;
 	}
 
 	/* Reset HW statistics and performance counters */
 	if (mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 1))
-		mlx4_dbg(HW, priv, "Failed dumping statistics\n");
+		en_dbg(HW, priv, "Failed dumping statistics\n");
 
 	memset(&priv->stats, 0, sizeof(priv->stats));
 	memset(&priv->pstats, 0, sizeof(priv->pstats));
@@ -804,7 +788,7 @@ static int mlx4_en_open(struct net_device *dev)
 	mlx4_en_set_default_moderation(priv);
 	err = mlx4_en_start_port(dev);
 	if (err)
-		mlx4_err(mdev, "Failed starting port:%d\n", priv->port);
+		en_err(priv, "Failed starting port:%d\n", priv->port);
 
 out:
 	mutex_unlock(&mdev->state_lock);
@@ -817,8 +801,7 @@ static int mlx4_en_close(struct net_device *dev)
 	struct mlx4_en_priv *priv = netdev_priv(dev);
 	struct mlx4_en_dev *mdev = priv->mdev;
 
-	if (netif_msg_ifdown(priv))
-		mlx4_info(mdev, "Close called for port:%d\n", priv->port);
+	en_dbg(IFDOWN, priv, "Close port called\n");
 
 	mutex_lock(&mdev->state_lock);
 
@@ -850,7 +833,6 @@ void mlx4_en_free_resources(struct mlx4_en_priv *priv)
 
 int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
 {
-	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_en_port_profile *prof = priv->prof;
 	int i;
 
@@ -879,7 +861,7 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
 	return 0;
 
 err:
-	mlx4_err(mdev, "Failed to allocate NIC resources\n");
+	en_err(priv, "Failed to allocate NIC resources\n");
 	return -ENOMEM;
 }
 
@@ -889,7 +871,7 @@ void mlx4_en_destroy_netdev(struct net_device *dev)
 	struct mlx4_en_priv *priv = netdev_priv(dev);
 	struct mlx4_en_dev *mdev = priv->mdev;
 
-	mlx4_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port);
+	en_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port);
 
 	/* Unregister device - this will close the port if it was up */
 	if (priv->registered)
@@ -918,11 +900,11 @@ static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu)
 	struct mlx4_en_dev *mdev = priv->mdev;
 	int err = 0;
 
-	mlx4_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n",
+	en_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n",
 		 dev->mtu, new_mtu);
 
 	if ((new_mtu < MLX4_EN_MIN_MTU) || (new_mtu > priv->max_mtu)) {
-		mlx4_err(mdev, "Bad MTU size:%d.\n", new_mtu);
+		en_err(priv, "Bad MTU size:%d.\n", new_mtu);
 		return -EPERM;
 	}
 	dev->mtu = new_mtu;
@@ -932,13 +914,13 @@ static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu)
 		if (!mdev->device_up) {
 			/* NIC is probably restarting - let watchdog task reset
 			 * the port */
-			mlx4_dbg(DRV, priv, "Change MTU called with card down!?\n");
+			en_dbg(DRV, priv, "Change MTU called with card down!?\n");
 		} else {
 			mlx4_en_stop_port(dev);
 			mlx4_en_set_default_moderation(priv);
 			err = mlx4_en_start_port(dev);
 			if (err) {
-				mlx4_err(mdev, "Failed restarting port:%d\n",
+				en_err(priv, "Failed restarting port:%d\n",
 					 priv->port);
 				queue_work(mdev->workqueue, &priv->watchdog_task);
 			}
@@ -952,6 +934,7 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_open		= mlx4_en_open,
 	.ndo_stop		= mlx4_en_close,
 	.ndo_start_xmit		= mlx4_en_xmit,
+	.ndo_select_queue	= mlx4_en_select_queue,
 	.ndo_get_stats		= mlx4_en_get_stats,
 	.ndo_set_multicast_list	= mlx4_en_set_multicast,
 	.ndo_set_mac_address	= mlx4_en_set_mac,
@@ -974,7 +957,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	int i;
 	int err;
 
-	dev = alloc_etherdev(sizeof(struct mlx4_en_priv));
+	dev = alloc_etherdev_mq(sizeof(struct mlx4_en_priv), prof->tx_ring_num);
 	if (dev == NULL) {
 		mlx4_err(mdev, "Net device allocation failed\n");
 		return -ENOMEM;
@@ -1012,7 +995,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port];
 	priv->mac = mdev->dev->caps.def_mac[priv->port];
 	if (ILLEGAL_MAC(priv->mac)) {
-		mlx4_err(mdev, "Port: %d, invalid mac burned: 0x%llx, quiting\n",
+		en_err(priv, "Port: %d, invalid mac burned: 0x%llx, quiting\n",
 			 priv->port, priv->mac);
 		err = -EINVAL;
 		goto out;
@@ -1031,19 +1014,17 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	err = mlx4_alloc_hwq_res(mdev->dev, &priv->res,
 				MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE);
 	if (err) {
-		mlx4_err(mdev, "Failed to allocate page for rx qps\n");
+		en_err(priv, "Failed to allocate page for rx qps\n");
 		goto out;
 	}
 	priv->allocated = 1;
 
-	/* Populate Tx priority mappings */
-	mlx4_en_set_prio_map(priv, priv->tx_prio_map, prof->tx_ring_num);
-
 	/*
 	 * Initialize netdev entry points
 	 */
 	dev->netdev_ops = &mlx4_netdev_ops;
 	dev->watchdog_timeo = MLX4_EN_WATCHDOG_TIMEOUT;
+	dev->real_num_tx_queues = MLX4_EN_NUM_TX_RINGS;
 
 	SET_ETHTOOL_OPS(dev, &mlx4_en_ethtool_ops);
 
@@ -1057,7 +1038,9 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	 * Set driver features
 	 */
 	dev->features |= NETIF_F_SG;
+	dev->vlan_features |= NETIF_F_SG;
 	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= NETIF_F_HW_VLAN_TX |
 			 NETIF_F_HW_VLAN_RX |
@@ -1067,6 +1050,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	if (mdev->LSO_support) {
 		dev->features |= NETIF_F_TSO;
 		dev->features |= NETIF_F_TSO6;
+		dev->vlan_features |= NETIF_F_TSO;
+		dev->vlan_features |= NETIF_F_TSO6;
 	}
 
 	mdev->pndev[port] = dev;
@@ -1074,9 +1059,13 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	netif_carrier_off(dev);
 	err = register_netdev(dev);
 	if (err) {
-		mlx4_err(mdev, "Netdev registration failed\n");
+		en_err(priv, "Netdev registration failed for port %d\n", port);
 		goto out;
 	}
+
+	en_warn(priv, "Using %d TX rings\n", prof->tx_ring_num);
+	en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
+
 	priv->registered = 1;
 	queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
 	return 0;
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 9ee873e872b..5a14899c1e2 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -114,8 +114,8 @@ static int mlx4_en_init_allocator(struct mlx4_en_priv *priv,
 			goto out;
 
 		page_alloc->offset = priv->frag_info[i].frag_align;
-		mlx4_dbg(DRV, priv, "Initialized allocator:%d with page:%p\n",
-			 i, page_alloc->page);
+		en_dbg(DRV, priv, "Initialized allocator:%d with page:%p\n",
+		       i, page_alloc->page);
 	}
 	return 0;
 
@@ -136,8 +136,8 @@ static void mlx4_en_destroy_allocator(struct mlx4_en_priv *priv,
 
 	for (i = 0; i < priv->num_frags; i++) {
 		page_alloc = &ring->page_alloc[i];
-		mlx4_dbg(DRV, priv, "Freeing allocator:%d count:%d\n",
-			 i, page_count(page_alloc->page));
+		en_dbg(DRV, priv, "Freeing allocator:%d count:%d\n",
+		       i, page_count(page_alloc->page));
 
 		put_page(page_alloc->page);
 		page_alloc->page = NULL;
@@ -202,12 +202,34 @@ static inline void mlx4_en_update_rx_prod_db(struct mlx4_en_rx_ring *ring)
 	*ring->wqres.db.db = cpu_to_be32(ring->prod & 0xffff);
 }
 
-static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv)
+static void mlx4_en_free_rx_desc(struct mlx4_en_priv *priv,
+				 struct mlx4_en_rx_ring *ring,
+				 int index)
 {
 	struct mlx4_en_dev *mdev = priv->mdev;
+	struct skb_frag_struct *skb_frags;
+	struct mlx4_en_rx_desc *rx_desc = ring->buf + (index << ring->log_stride);
+	dma_addr_t dma;
+	int nr;
+
+	skb_frags = ring->rx_info + (index << priv->log_rx_info);
+	for (nr = 0; nr < priv->num_frags; nr++) {
+		en_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
+		dma = be64_to_cpu(rx_desc->data[nr].addr);
+
+		en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
+		pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
+				 PCI_DMA_FROMDEVICE);
+		put_page(skb_frags[nr].page);
+	}
+}
+
+static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv)
+{
 	struct mlx4_en_rx_ring *ring;
 	int ring_ind;
 	int buf_ind;
+	int new_size;
 
 	for (buf_ind = 0; buf_ind < priv->prof->rx_ring_size; buf_ind++) {
 		for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) {
@@ -216,22 +238,34 @@ static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv)
 			if (mlx4_en_prepare_rx_desc(priv, ring,
 						    ring->actual_size)) {
 				if (ring->actual_size < MLX4_EN_MIN_RX_SIZE) {
-					mlx4_err(mdev, "Failed to allocate "
-						       "enough rx buffers\n");
+					en_err(priv, "Failed to allocate "
+						     "enough rx buffers\n");
 					return -ENOMEM;
 				} else {
-					if (netif_msg_rx_err(priv))
-						mlx4_warn(mdev,
-							  "Only %d buffers allocated\n",
-							  ring->actual_size);
-					goto out;
+					new_size = rounddown_pow_of_two(ring->actual_size);
+					en_warn(priv, "Only %d buffers allocated "
+						      "reducing ring size to %d",
+						ring->actual_size, new_size);
+					goto reduce_rings;
 				}
 			}
 			ring->actual_size++;
 			ring->prod++;
 		}
 	}
-out:
+	return 0;
+
+reduce_rings:
+	for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) {
+		ring = &priv->rx_ring[ring_ind];
+		while (ring->actual_size > new_size) {
+			ring->actual_size--;
+			ring->prod--;
+			mlx4_en_free_rx_desc(priv, ring, ring->actual_size);
+		}
+		ring->size_mask = ring->actual_size - 1;
+	}
+
 	return 0;
 }
 
@@ -247,15 +281,14 @@ static int mlx4_en_fill_rx_buf(struct net_device *dev,
 					      ring->size_mask);
 		if (err) {
 			if (netif_msg_rx_err(priv))
-				mlx4_warn(priv->mdev,
-					  "Failed preparing rx descriptor\n");
+				en_warn(priv, "Failed preparing rx descriptor\n");
 			priv->port_stats.rx_alloc_failed++;
 			break;
 		}
 		++num;
 		++ring->prod;
 	}
-	if ((u32) (ring->prod - ring->cons) == ring->size)
+	if ((u32) (ring->prod - ring->cons) == ring->actual_size)
 		ring->full = 1;
 
 	return num;
@@ -264,33 +297,17 @@ static int mlx4_en_fill_rx_buf(struct net_device *dev,
 static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv,
 				struct mlx4_en_rx_ring *ring)
 {
-	struct mlx4_en_dev *mdev = priv->mdev;
-	struct skb_frag_struct *skb_frags;
-	struct mlx4_en_rx_desc *rx_desc;
-	dma_addr_t dma;
 	int index;
-	int nr;
 
-	mlx4_dbg(DRV, priv, "Freeing Rx buf - cons:%d prod:%d\n",
-			ring->cons, ring->prod);
+	en_dbg(DRV, priv, "Freeing Rx buf - cons:%d prod:%d\n",
+	       ring->cons, ring->prod);
 
 	/* Unmap and free Rx buffers */
-	BUG_ON((u32) (ring->prod - ring->cons) > ring->size);
+	BUG_ON((u32) (ring->prod - ring->cons) > ring->actual_size);
 	while (ring->cons != ring->prod) {
 		index = ring->cons & ring->size_mask;
-		rx_desc = ring->buf + (index << ring->log_stride);
-		skb_frags = ring->rx_info + (index << priv->log_rx_info);
-		mlx4_dbg(DRV, priv, "Processing descriptor:%d\n", index);
-
-		for (nr = 0; nr < priv->num_frags; nr++) {
-			mlx4_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
-			dma = be64_to_cpu(rx_desc->data[nr].addr);
-
-			mlx4_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
-			pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
-					 PCI_DMA_FROMDEVICE);
-			put_page(skb_frags[nr].page);
-		}
+		en_dbg(DRV, priv, "Processing descriptor:%d\n", index);
+		mlx4_en_free_rx_desc(priv, ring, index);
 		++ring->cons;
 	}
 }
@@ -354,10 +371,10 @@ int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 					sizeof(struct skb_frag_struct));
 	ring->rx_info = vmalloc(tmp);
 	if (!ring->rx_info) {
-		mlx4_err(mdev, "Failed allocating rx_info ring\n");
+		en_err(priv, "Failed allocating rx_info ring\n");
 		return -ENOMEM;
 	}
-	mlx4_dbg(DRV, priv, "Allocated rx_info ring at addr:%p size:%d\n",
+	en_dbg(DRV, priv, "Allocated rx_info ring at addr:%p size:%d\n",
 		 ring->rx_info, tmp);
 
 	err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres,
@@ -367,7 +384,7 @@ int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 
 	err = mlx4_en_map_buffer(&ring->wqres.buf);
 	if (err) {
-		mlx4_err(mdev, "Failed to map RX buffer\n");
+		en_err(priv, "Failed to map RX buffer\n");
 		goto err_hwq;
 	}
 	ring->buf = ring->wqres.buf.direct.buf;
@@ -385,7 +402,7 @@ int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
 				    sizeof(struct net_lro_desc),
 				    GFP_KERNEL);
 	if (!ring->lro.lro_arr) {
-		mlx4_err(mdev, "Failed to allocate lro array\n");
+		en_err(priv, "Failed to allocate lro array\n");
 		goto err_map;
 	}
 	ring->lro.get_frag_header = mlx4_en_get_frag_header;
@@ -436,7 +453,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
 		/* Initialize page allocators */
 		err = mlx4_en_init_allocator(priv, ring);
 		if (err) {
-			mlx4_err(mdev, "Failed initializing ring allocator\n");
+			en_err(priv, "Failed initializing ring allocator\n");
 			ring_ind--;
 			goto err_allocator;
 		}
@@ -454,7 +471,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
 		mlx4_en_update_rx_prod_db(ring);
 
 		/* Configure SRQ representing the ring */
-		ring->srq.max    = ring->size;
+		ring->srq.max    = ring->actual_size;
 		ring->srq.max_gs = max_gs;
 		ring->srq.wqe_shift = ilog2(ring->stride);
 
@@ -467,7 +484,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
 		err = mlx4_srq_alloc(mdev->dev, mdev->priv_pdn, &ring->wqres.mtt,
 				     ring->wqres.db.dma, &ring->srq);
 		if (err){
-			mlx4_err(mdev, "Failed to allocate srq\n");
+			en_err(priv, "Failed to allocate srq\n");
 			ring_ind--;
 			goto err_srq;
 		}
@@ -582,7 +599,7 @@ static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv,
 
 	skb = dev_alloc_skb(SMALL_PACKET_SIZE + NET_IP_ALIGN);
 	if (!skb) {
-		mlx4_dbg(RX_ERR, priv, "Failed allocating skb\n");
+		en_dbg(RX_ERR, priv, "Failed allocating skb\n");
 		return NULL;
 	}
 	skb->dev = priv->dev;
@@ -661,7 +678,6 @@ static void mlx4_en_copy_desc(struct mlx4_en_priv *priv,
 int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int budget)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	struct mlx4_cqe *cqe;
 	struct mlx4_en_rx_ring *ring = &priv->rx_ring[cq->ring];
 	struct skb_frag_struct *skb_frags;
@@ -698,14 +714,14 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
 		/* Drop packet on bad receive or bad checksum */
 		if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) ==
 						MLX4_CQE_OPCODE_ERROR)) {
-			mlx4_err(mdev, "CQE completed in error - vendor "
+			en_err(priv, "CQE completed in error - vendor "
 				  "syndrom:%d syndrom:%d\n",
 				  ((struct mlx4_err_cqe *) cqe)->vendor_err_syndrome,
 				  ((struct mlx4_err_cqe *) cqe)->syndrome);
 			goto next;
 		}
 		if (unlikely(cqe->badfcs_enc & MLX4_CQE_BAD_FCS)) {
-			mlx4_dbg(RX_ERR, priv, "Accepted frame with bad FCS\n");
+			en_dbg(RX_ERR, priv, "Accepted frame with bad FCS\n");
 			goto next;
 		}
 
@@ -855,7 +871,7 @@ static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16
 	u16 res = MLX4_EN_ALLOC_SIZE % stride;
 	u16 offset = MLX4_EN_ALLOC_SIZE - stride - res + align;
 
-	mlx4_dbg(DRV, priv, "Calculated last offset for stride:%d align:%d "
+	en_dbg(DRV, priv, "Calculated last offset for stride:%d align:%d "
 			    "res:%d offset:%d\n", stride, align, res, offset);
 	return offset;
 }
@@ -900,10 +916,10 @@ void mlx4_en_calc_rx_buf(struct net_device *dev)
 	priv->rx_skb_size = eff_mtu;
 	priv->log_rx_info = ROUNDUP_LOG2(i * sizeof(struct skb_frag_struct));
 
-	mlx4_dbg(DRV, priv, "Rx buffer scatter-list (effective-mtu:%d "
+	en_dbg(DRV, priv, "Rx buffer scatter-list (effective-mtu:%d "
 		  "num_frags:%d):\n", eff_mtu, priv->num_frags);
 	for (i = 0; i < priv->num_frags; i++) {
-		mlx4_dbg(DRV, priv, "  frag:%d - size:%d prefix:%d align:%d "
+		en_dbg(DRV, priv, "  frag:%d - size:%d prefix:%d align:%d "
 				"stride:%d last_offset:%d\n", i,
 				priv->frag_info[i].frag_size,
 				priv->frag_info[i].frag_prefix_size,
@@ -923,12 +939,12 @@ void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
 	int i;
 
 	rss_map->size = roundup_pow_of_two(num_entries);
-	mlx4_dbg(DRV, priv, "Setting default RSS map of %d entires\n",
-		 rss_map->size);
+	en_dbg(DRV, priv, "Setting default RSS map of %d entires\n",
+	       rss_map->size);
 
 	for (i = 0; i < rss_map->size; i++) {
 		rss_map->map[i] = i % num_rings;
-		mlx4_dbg(DRV, priv, "Entry %d ---> ring %d\n", i, rss_map->map[i]);
+		en_dbg(DRV, priv, "Entry %d ---> ring %d\n", i, rss_map->map[i]);
 	}
 }
 
@@ -943,13 +959,13 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
 
 	context = kmalloc(sizeof *context , GFP_KERNEL);
 	if (!context) {
-		mlx4_err(mdev, "Failed to allocate qp context\n");
+		en_err(priv, "Failed to allocate qp context\n");
 		return -ENOMEM;
 	}
 
 	err = mlx4_qp_alloc(mdev->dev, qpn, qp);
 	if (err) {
-		mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn);
+		en_err(priv, "Failed to allocate qp #%x\n", qpn);
 		goto out;
 	}
 	qp->event = mlx4_en_sqp_event;
@@ -981,12 +997,11 @@ int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv)
 	int err = 0;
 	int good_qps = 0;
 
-	mlx4_dbg(DRV, priv, "Configuring rss steering for port %u\n", priv->port);
+	en_dbg(DRV, priv, "Configuring rss steering\n");
 	err = mlx4_qp_reserve_range(mdev->dev, rss_map->size,
 				    rss_map->size, &rss_map->base_qpn);
 	if (err) {
-		mlx4_err(mdev, "Failed reserving %d qps for port %u\n",
-			 rss_map->size, priv->port);
+		en_err(priv, "Failed reserving %d qps\n", rss_map->size);
 		return err;
 	}
 
@@ -1006,13 +1021,13 @@ int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv)
 	/* Configure RSS indirection qp */
 	err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &priv->base_qpn);
 	if (err) {
-		mlx4_err(mdev, "Failed to reserve range for RSS "
-			       "indirection qp\n");
+		en_err(priv, "Failed to reserve range for RSS "
+			     "indirection qp\n");
 		goto rss_err;
 	}
 	err = mlx4_qp_alloc(mdev->dev, priv->base_qpn, &rss_map->indir_qp);
 	if (err) {
-		mlx4_err(mdev, "Failed to allocate RSS indirection QP\n");
+		en_err(priv, "Failed to allocate RSS indirection QP\n");
 		goto reserve_err;
 	}
 	rss_map->indir_qp.event = mlx4_en_sqp_event;
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index e5c98a98ad3..5dc7466ad03 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -68,15 +68,15 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
 	tmp = size * sizeof(struct mlx4_en_tx_info);
 	ring->tx_info = vmalloc(tmp);
 	if (!ring->tx_info) {
-		mlx4_err(mdev, "Failed allocating tx_info ring\n");
+		en_err(priv, "Failed allocating tx_info ring\n");
 		return -ENOMEM;
 	}
-	mlx4_dbg(DRV, priv, "Allocated tx_info ring at addr:%p size:%d\n",
+	en_dbg(DRV, priv, "Allocated tx_info ring at addr:%p size:%d\n",
 		 ring->tx_info, tmp);
 
 	ring->bounce_buf = kmalloc(MAX_DESC_SIZE, GFP_KERNEL);
 	if (!ring->bounce_buf) {
-		mlx4_err(mdev, "Failed allocating bounce buffer\n");
+		en_err(priv, "Failed allocating bounce buffer\n");
 		err = -ENOMEM;
 		goto err_tx;
 	}
@@ -85,31 +85,31 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
 	err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres, ring->buf_size,
 				 2 * PAGE_SIZE);
 	if (err) {
-		mlx4_err(mdev, "Failed allocating hwq resources\n");
+		en_err(priv, "Failed allocating hwq resources\n");
 		goto err_bounce;
 	}
 
 	err = mlx4_en_map_buffer(&ring->wqres.buf);
 	if (err) {
-		mlx4_err(mdev, "Failed to map TX buffer\n");
+		en_err(priv, "Failed to map TX buffer\n");
 		goto err_hwq_res;
 	}
 
 	ring->buf = ring->wqres.buf.direct.buf;
 
-	mlx4_dbg(DRV, priv, "Allocated TX ring (addr:%p) - buf:%p size:%d "
-		 "buf_size:%d dma:%llx\n", ring, ring->buf, ring->size,
-		 ring->buf_size, (unsigned long long) ring->wqres.buf.direct.map);
+	en_dbg(DRV, priv, "Allocated TX ring (addr:%p) - buf:%p size:%d "
+	       "buf_size:%d dma:%llx\n", ring, ring->buf, ring->size,
+	       ring->buf_size, (unsigned long long) ring->wqres.buf.direct.map);
 
 	err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &ring->qpn);
 	if (err) {
-		mlx4_err(mdev, "Failed reserving qp for tx ring.\n");
+		en_err(priv, "Failed reserving qp for tx ring.\n");
 		goto err_map;
 	}
 
 	err = mlx4_qp_alloc(mdev->dev, ring->qpn, &ring->qp);
 	if (err) {
-		mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn);
+		en_err(priv, "Failed allocating qp %d\n", ring->qpn);
 		goto err_reserve;
 	}
 	ring->qp.event = mlx4_en_sqp_event;
@@ -135,7 +135,7 @@ void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv,
 			     struct mlx4_en_tx_ring *ring)
 {
 	struct mlx4_en_dev *mdev = priv->mdev;
-	mlx4_dbg(DRV, priv, "Destroying tx ring, qpn: %d\n", ring->qpn);
+	en_dbg(DRV, priv, "Destroying tx ring, qpn: %d\n", ring->qpn);
 
 	mlx4_qp_remove(mdev->dev, &ring->qp);
 	mlx4_qp_free(mdev->dev, &ring->qp);
@@ -274,12 +274,12 @@ int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring)
 
 	/* Skip last polled descriptor */
 	ring->cons += ring->last_nr_txbb;
-	mlx4_dbg(DRV, priv, "Freeing Tx buf - cons:0x%x prod:0x%x\n",
+	en_dbg(DRV, priv, "Freeing Tx buf - cons:0x%x prod:0x%x\n",
 		 ring->cons, ring->prod);
 
 	if ((u32) (ring->prod - ring->cons) > ring->size) {
 		if (netif_msg_tx_err(priv))
-			mlx4_warn(priv->mdev, "Tx consumer passed producer!\n");
+			en_warn(priv, "Tx consumer passed producer!\n");
 		return 0;
 	}
 
@@ -292,39 +292,11 @@ int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring)
 	}
 
 	if (cnt)
-		mlx4_dbg(DRV, priv, "Freed %d uncompleted tx descriptors\n", cnt);
+		en_dbg(DRV, priv, "Freed %d uncompleted tx descriptors\n", cnt);
 
 	return cnt;
 }
 
-void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num)
-{
-	int block = 8 / ring_num;
-	int extra = 8 - (block * ring_num);
-	int num = 0;
-	u16 ring = 1;
-	int prio;
-
-	if (ring_num == 1) {
-		for (prio = 0; prio < 8; prio++)
-			prio_map[prio] = 0;
-		return;
-	}
-
-	for (prio = 0; prio < 8; prio++) {
-		if (extra && (num == block + 1)) {
-			ring++;
-			num = 0;
-			extra--;
-		} else if (!extra && (num == block)) {
-			ring++;
-			num = 0;
-		}
-		prio_map[prio] = ring;
-		mlx4_dbg(DRV, priv, " prio:%d --> ring:%d\n", prio, ring);
-		num++;
-	}
-}
 
 static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq)
 {
@@ -386,18 +358,8 @@ static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq)
 	if (unlikely(ring->blocked)) {
 		if ((u32) (ring->prod - ring->cons) <=
 		     ring->size - HEADROOM - MAX_DESC_TXBBS) {
-
-			/* TODO: support multiqueue netdevs. Currently, we block
-			 * when *any* ring is full. Note that:
-			 * - 2 Tx rings can unblock at the same time and call
-			 *   netif_wake_queue(), which is OK since this
-			 *   operation is idempotent.
-			 * - We might wake the queue just after another ring
-			 *   stopped it. This is no big deal because the next
-			 *   transmission on that ring would stop the queue.
-			 */
 			ring->blocked = 0;
-			netif_wake_queue(dev);
+			netif_tx_wake_queue(netdev_get_tx_queue(dev, cq->ring));
 			priv->port_stats.wake_queue++;
 		}
 	}
@@ -539,7 +501,6 @@ static int get_real_size(struct sk_buff *skb, struct net_device *dev,
 			 int *lso_header_size)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
-	struct mlx4_en_dev *mdev = priv->mdev;
 	int real_size;
 
 	if (skb_is_gso(skb)) {
@@ -553,14 +514,14 @@ static int get_real_size(struct sk_buff *skb, struct net_device *dev,
 				real_size += DS_SIZE;
 			else {
 				if (netif_msg_tx_err(priv))
-					mlx4_warn(mdev, "Non-linear headers\n");
+					en_warn(priv, "Non-linear headers\n");
 				dev_kfree_skb_any(skb);
 				return 0;
 			}
 		}
 		if (unlikely(*lso_header_size > MAX_LSO_HDR_SIZE)) {
 			if (netif_msg_tx_err(priv))
-				mlx4_warn(mdev, "LSO header size too big\n");
+				en_warn(priv, "LSO header size too big\n");
 			dev_kfree_skb_any(skb);
 			return 0;
 		}
@@ -617,21 +578,20 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk
 	tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f;
 }
 
-static int get_vlan_info(struct mlx4_en_priv *priv, struct sk_buff *skb,
-			 u16 *vlan_tag)
+u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
-	int tx_ind;
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	u16 vlan_tag = 0;
 
-	/* Obtain VLAN information if present */
-	if (priv->vlgrp && vlan_tx_tag_present(skb)) {
-		*vlan_tag = vlan_tx_tag_get(skb);
-		/* Set the Tx ring to use according to vlan priority */
-		tx_ind = priv->tx_prio_map[*vlan_tag >> 13];
-	} else {
-		*vlan_tag = 0;
-		tx_ind = 0;
+	/* If we support per priority flow control and the packet contains
+	 * a vlan tag, send the packet to the TX ring assigned to that priority
+	 */
+	if (priv->prof->rx_ppp && priv->vlgrp && vlan_tx_tag_present(skb)) {
+		vlan_tag = vlan_tx_tag_get(skb);
+		return MLX4_EN_NUM_TX_RINGS + (vlan_tag >> 13);
 	}
-	return tx_ind;
+
+	return skb_tx_hash(dev, skb);
 }
 
 int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -651,7 +611,7 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	dma_addr_t dma;
 	u32 index;
 	__be32 op_own;
-	u16 vlan_tag;
+	u16 vlan_tag = 0;
 	int i;
 	int lso_header_size;
 	void *fragptr;
@@ -669,20 +629,21 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	nr_txbb = desc_size / TXBB_SIZE;
 	if (unlikely(nr_txbb > MAX_DESC_TXBBS)) {
 		if (netif_msg_tx_err(priv))
-			mlx4_warn(mdev, "Oversized header or SG list\n");
+			en_warn(priv, "Oversized header or SG list\n");
 		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-	tx_ind = get_vlan_info(priv, skb, &vlan_tag);
+	tx_ind = skb->queue_mapping;
 	ring = &priv->tx_ring[tx_ind];
+	if (priv->vlgrp && vlan_tx_tag_present(skb))
+		vlan_tag = vlan_tx_tag_get(skb);
 
 	/* Check available TXBBs And 2K spare for prefetch */
 	if (unlikely(((int)(ring->prod - ring->cons)) >
 		     ring->size - HEADROOM - MAX_DESC_TXBBS)) {
-		/* every full Tx ring stops queue.
-		 * TODO: implement multi-queue support (per-queue stop) */
-		netif_stop_queue(dev);
+		/* every full Tx ring stops queue */
+		netif_tx_stop_queue(netdev_get_tx_queue(dev, tx_ind));
 		ring->blocked = 1;
 		priv->port_stats.queue_stopped++;
 
@@ -695,7 +656,7 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Now that we know what Tx ring to use */
 	if (unlikely(!priv->port_up)) {
 		if (netif_msg_tx_err(priv))
-			mlx4_warn(mdev, "xmit: port down!\n");
+			en_warn(priv, "xmit: port down!\n");
 		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
@@ -819,7 +780,6 @@ int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* Ring doorbell! */
 	wmb();
 	writel(ring->doorbell_qpn, mdev->uar_map + MLX4_SEND_DOORBELL);
-	dev->trans_start = jiffies;
 
 	/* Poll CQ here */
 	mlx4_en_xmit_poll(priv, tx_ind);
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index 8830dcb92ec..b9ceddde46c 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -497,8 +497,10 @@ static void mlx4_free_irqs(struct mlx4_dev *dev)
 	if (eq_table->have_irq)
 		free_irq(dev->pdev->irq, dev);
 	for (i = 0; i < dev->caps.num_comp_vectors + 1; ++i)
-		if (eq_table->eq[i].have_irq)
+		if (eq_table->eq[i].have_irq) {
 			free_irq(eq_table->eq[i].irq, eq_table->eq + i);
+			eq_table->eq[i].have_irq = 0;
+		}
 
 	kfree(eq_table->irq_names);
 }
@@ -623,8 +625,10 @@ int mlx4_init_eq_table(struct mlx4_dev *dev)
 		err = mlx4_create_eq(dev, dev->caps.num_cqs + MLX4_NUM_SPARE_EQE,
 				     (dev->flags & MLX4_FLAG_MSI_X) ? i : 0,
 				     &priv->eq_table.eq[i]);
-		if (err)
+		if (err) {
+			--i;
 			goto err_out_unmap;
+		}
 	}
 
 	err = mlx4_create_eq(dev, MLX4_NUM_ASYNC_EQE + MLX4_NUM_SPARE_EQE,
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 30bea968969..018348c0119 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -100,6 +100,10 @@ module_param_named(use_prio, use_prio, bool, 0444);
 MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports "
 		  "(0/1, default 0)");
 
+static int log_mtts_per_seg = ilog2(MLX4_MTT_ENTRY_PER_SEG);
+module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444);
+MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-5)");
+
 int mlx4_check_port_params(struct mlx4_dev *dev,
 			   enum mlx4_port_type *port_type)
 {
@@ -203,12 +207,13 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 	dev->caps.max_cqes	     = dev_cap->max_cq_sz - 1;
 	dev->caps.reserved_cqs	     = dev_cap->reserved_cqs;
 	dev->caps.reserved_eqs	     = dev_cap->reserved_eqs;
+	dev->caps.mtts_per_seg	     = 1 << log_mtts_per_seg;
 	dev->caps.reserved_mtts	     = DIV_ROUND_UP(dev_cap->reserved_mtts,
-						    MLX4_MTT_ENTRY_PER_SEG);
+						    dev->caps.mtts_per_seg);
 	dev->caps.reserved_mrws	     = dev_cap->reserved_mrws;
 	dev->caps.reserved_uars	     = dev_cap->reserved_uars;
 	dev->caps.reserved_pds	     = dev_cap->reserved_pds;
-	dev->caps.mtt_entry_sz	     = MLX4_MTT_ENTRY_PER_SEG * dev_cap->mtt_entry_sz;
+	dev->caps.mtt_entry_sz	     = dev->caps.mtts_per_seg * dev_cap->mtt_entry_sz;
 	dev->caps.max_msg_sz         = dev_cap->max_msg_sz;
 	dev->caps.page_size_cap	     = ~(u32) (dev_cap->min_page_sz - 1);
 	dev->caps.flags		     = dev_cap->flags;
@@ -1304,6 +1309,11 @@ static int __init mlx4_verify_params(void)
 		return -1;
 	}
 
+	if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 5)) {
+		printk(KERN_WARNING "mlx4_core: bad log_mtts_per_seg: %d\n", log_mtts_per_seg);
+		return -1;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index ef840abbcd3..d43a9e4c2ae 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -49,26 +49,42 @@
 #include "en_port.h"
 
 #define DRV_NAME	"mlx4_en"
-#define DRV_VERSION	"1.4.0"
-#define DRV_RELDATE	"Sep 2008"
+#define DRV_VERSION	"1.4.1.1"
+#define DRV_RELDATE	"June 2009"
 
 
 #define MLX4_EN_MSG_LEVEL	(NETIF_MSG_LINK | NETIF_MSG_IFDOWN)
 
-#define mlx4_dbg(mlevel, priv, format, arg...)	\
-	if (NETIF_MSG_##mlevel & priv->msg_enable) \
-	printk(KERN_DEBUG "%s %s: " format , DRV_NAME ,\
-		(dev_name(&priv->mdev->pdev->dev)) , ## arg)
+#define en_print(level, priv, format, arg...)			\
+	{							\
+	if ((priv)->registered)					\
+		printk(level "%s: %s: " format, DRV_NAME,	\
+			(priv->dev)->name, ## arg);		\
+	else							\
+		printk(level "%s: %s: Port %d: " format,	\
+			DRV_NAME, dev_name(&priv->mdev->pdev->dev), \
+			(priv)->port, ## arg);			\
+	}
+
+#define en_dbg(mlevel, priv, format, arg...)			\
+	{							\
+	if (NETIF_MSG_##mlevel & priv->msg_enable)		\
+		en_print(KERN_DEBUG, priv, format, ## arg)	\
+	}
+#define en_warn(priv, format, arg...)				\
+	en_print(KERN_WARNING, priv, format, ## arg)
+#define en_err(priv, format, arg...)				\
+	en_print(KERN_ERR, priv, format, ## arg)
 
 #define mlx4_err(mdev, format, arg...) \
 	printk(KERN_ERR "%s %s: " format , DRV_NAME ,\
-		(dev_name(&mdev->pdev->dev)) , ## arg)
+		dev_name(&mdev->pdev->dev) , ## arg)
 #define mlx4_info(mdev, format, arg...) \
 	printk(KERN_INFO "%s %s: " format , DRV_NAME ,\
-		(dev_name(&mdev->pdev->dev)) , ## arg)
+		dev_name(&mdev->pdev->dev) , ## arg)
 #define mlx4_warn(mdev, format, arg...) \
 	printk(KERN_WARNING "%s %s: " format , DRV_NAME ,\
-		(dev_name(&mdev->pdev->dev)) , ## arg)
+		dev_name(&mdev->pdev->dev) , ## arg)
 
 /*
  * Device constants
@@ -123,12 +139,14 @@ enum {
 #define MLX4_EN_MIN_RX_SIZE	(MLX4_EN_ALLOC_SIZE / SMP_CACHE_BYTES)
 #define MLX4_EN_MIN_TX_SIZE	(4096 / TXBB_SIZE)
 
-#define MLX4_EN_TX_RING_NUM		9
-#define MLX4_EN_DEF_TX_RING_SIZE	1024
+#define MLX4_EN_SMALL_PKT_SIZE		64
+#define MLX4_EN_NUM_TX_RINGS		8
+#define MLX4_EN_NUM_PPP_RINGS		8
+#define MLX4_EN_DEF_TX_RING_SIZE	512
 #define MLX4_EN_DEF_RX_RING_SIZE  	1024
 
-/* Target number of bytes to coalesce with interrupt moderation */
-#define MLX4_EN_RX_COAL_TARGET	0x20000
+/* Target number of packets to coalesce with interrupt moderation */
+#define MLX4_EN_RX_COAL_TARGET	44
 #define MLX4_EN_RX_COAL_TIME	0x10
 
 #define MLX4_EN_TX_COAL_PKTS	5
@@ -462,7 +480,6 @@ struct mlx4_en_priv {
 	int base_qpn;
 
 	struct mlx4_en_rss_map rss_map;
-	u16 tx_prio_map[8];
 	u32 flags;
 #define MLX4_EN_FLAG_PROMISC	0x1
 	u32 tx_ring_num;
@@ -500,8 +517,6 @@ void mlx4_en_stop_port(struct net_device *dev);
 void mlx4_en_free_resources(struct mlx4_en_priv *priv);
 int mlx4_en_alloc_resources(struct mlx4_en_priv *priv);
 
-int mlx4_en_get_profile(struct mlx4_en_dev *mdev);
-
 int mlx4_en_create_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq,
 		      int entries, int ring, enum cq_type mode);
 void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
@@ -512,6 +527,7 @@ int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
 
 void mlx4_en_poll_tx_cq(unsigned long data);
 void mlx4_en_tx_irq(struct mlx4_cq *mcq);
+u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb);
 int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev);
 
 int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring,
@@ -546,7 +562,6 @@ void mlx4_en_calc_rx_buf(struct net_device *dev);
 void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
 				 struct mlx4_en_rss_map *rss_map,
 				 int num_entries, int num_rings);
-void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num);
 int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv);
 void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv);
 int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring);
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index 0caf74cae8b..5887e4764d2 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -209,7 +209,7 @@ int mlx4_mtt_init(struct mlx4_dev *dev, int npages, int page_shift,
 	} else
 		mtt->page_shift = page_shift;
 
-	for (mtt->order = 0, i = MLX4_MTT_ENTRY_PER_SEG; i < npages; i <<= 1)
+	for (mtt->order = 0, i = dev->caps.mtts_per_seg; i < npages; i <<= 1)
 		++mtt->order;
 
 	mtt->first_seg = mlx4_alloc_mtt_range(dev, mtt->order);
@@ -350,7 +350,7 @@ int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr)
 		mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG |
 						   MLX4_MPT_PD_FLAG_RAE);
 		mpt_entry->mtt_sz    = cpu_to_be32((1 << mr->mtt.order) *
-						   MLX4_MTT_ENTRY_PER_SEG);
+						   dev->caps.mtts_per_seg);
 	} else {
 		mpt_entry->flags    |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS);
 	}
@@ -391,7 +391,7 @@ static int mlx4_write_mtt_chunk(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
 	    (start_index + npages - 1) / (PAGE_SIZE / sizeof (u64)))
 		return -EINVAL;
 
-	if (start_index & (MLX4_MTT_ENTRY_PER_SEG - 1))
+	if (start_index & (dev->caps.mtts_per_seg - 1))
 		return -EINVAL;
 
 	mtts = mlx4_table_find(&priv->mr_table.mtt_table, mtt->first_seg +
@@ -402,7 +402,8 @@ static int mlx4_write_mtt_chunk(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
 	for (i = 0; i < npages; ++i)
 		mtts[i] = cpu_to_be64(page_list[i] | MLX4_MTT_FLAG_PRESENT);
 
-	dma_sync_single(&dev->pdev->dev, dma_handle, npages * sizeof (u64), DMA_TO_DEVICE);
+	dma_sync_single_for_cpu(&dev->pdev->dev, dma_handle,
+				npages * sizeof (u64), DMA_TO_DEVICE);
 
 	return 0;
 }
@@ -549,8 +550,8 @@ int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list
 	for (i = 0; i < npages; ++i)
 		fmr->mtts[i] = cpu_to_be64(page_list[i] | MLX4_MTT_FLAG_PRESENT);
 
-	dma_sync_single(&dev->pdev->dev, fmr->dma_handle,
-			npages * sizeof(u64), DMA_TO_DEVICE);
+	dma_sync_single_for_cpu(&dev->pdev->dev, fmr->dma_handle,
+				npages * sizeof(u64), DMA_TO_DEVICE);
 
 	fmr->mpt->key    = cpu_to_be32(key);
 	fmr->mpt->lkey   = cpu_to_be32(key);
diff --git a/drivers/net/mlx4/profile.c b/drivers/net/mlx4/profile.c
index cebdf3243ca..bd22df95adf 100644
--- a/drivers/net/mlx4/profile.c
+++ b/drivers/net/mlx4/profile.c
@@ -98,7 +98,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev,
 	profile[MLX4_RES_EQ].size     = dev_cap->eqc_entry_sz;
 	profile[MLX4_RES_DMPT].size   = dev_cap->dmpt_entry_sz;
 	profile[MLX4_RES_CMPT].size   = dev_cap->cmpt_entry_sz;
-	profile[MLX4_RES_MTT].size    = MLX4_MTT_ENTRY_PER_SEG * dev_cap->mtt_entry_sz;
+	profile[MLX4_RES_MTT].size    = dev->caps.mtts_per_seg * dev_cap->mtt_entry_sz;
 	profile[MLX4_RES_MCG].size    = MLX4_MGM_ENTRY_SIZE;
 
 	profile[MLX4_RES_QP].num      = request->num_qp;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 6bb5af35eda..b4e18a58cb1 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -55,6 +55,7 @@
 #include <linux/types.h>
 #include <linux/inet_lro.h>
 #include <asm/system.h>
+#include <linux/list.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
 static char mv643xx_eth_driver_version[] = "1.4";
@@ -88,7 +89,24 @@ static char mv643xx_eth_driver_version[] = "1.4";
 #define MAC_ADDR_LOW			0x0014
 #define MAC_ADDR_HIGH			0x0018
 #define SDMA_CONFIG			0x001c
+#define  TX_BURST_SIZE_16_64BIT		0x01000000
+#define  TX_BURST_SIZE_4_64BIT		0x00800000
+#define  BLM_TX_NO_SWAP			0x00000020
+#define  BLM_RX_NO_SWAP			0x00000010
+#define  RX_BURST_SIZE_16_64BIT		0x00000008
+#define  RX_BURST_SIZE_4_64BIT		0x00000004
 #define PORT_SERIAL_CONTROL		0x003c
+#define  SET_MII_SPEED_TO_100		0x01000000
+#define  SET_GMII_SPEED_TO_1000		0x00800000
+#define  SET_FULL_DUPLEX_MODE		0x00200000
+#define  MAX_RX_PACKET_9700BYTE		0x000a0000
+#define  DISABLE_AUTO_NEG_SPEED_GMII	0x00002000
+#define  DO_NOT_FORCE_LINK_FAIL		0x00000400
+#define  SERIAL_PORT_CONTROL_RESERVED	0x00000200
+#define  DISABLE_AUTO_NEG_FOR_FLOW_CTRL	0x00000008
+#define  DISABLE_AUTO_NEG_FOR_DUPLEX	0x00000004
+#define  FORCE_LINK_PASS		0x00000002
+#define  SERIAL_PORT_ENABLE		0x00000001
 #define PORT_STATUS			0x0044
 #define  TX_FIFO_EMPTY			0x00000400
 #define  TX_IN_PROGRESS			0x00000080
@@ -106,7 +124,9 @@ static char mv643xx_eth_driver_version[] = "1.4";
 #define TX_BW_BURST			0x005c
 #define INT_CAUSE			0x0060
 #define  INT_TX_END			0x07f80000
+#define  INT_TX_END_0			0x00080000
 #define  INT_RX				0x000003fc
+#define  INT_RX_0			0x00000004
 #define  INT_EXT			0x00000002
 #define INT_CAUSE_EXT			0x0064
 #define  INT_EXT_LINK_PHY		0x00110000
@@ -135,15 +155,8 @@ static char mv643xx_eth_driver_version[] = "1.4";
 
 
 /*
- * SDMA configuration register.
+ * SDMA configuration register default value.
  */
-#define RX_BURST_SIZE_4_64BIT		(2 << 1)
-#define RX_BURST_SIZE_16_64BIT		(4 << 1)
-#define BLM_RX_NO_SWAP			(1 << 4)
-#define BLM_TX_NO_SWAP			(1 << 5)
-#define TX_BURST_SIZE_4_64BIT		(2 << 22)
-#define TX_BURST_SIZE_16_64BIT		(4 << 22)
-
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
 		(RX_BURST_SIZE_4_64BIT	|	\
@@ -160,22 +173,11 @@ static char mv643xx_eth_driver_version[] = "1.4";
 
 
 /*
- * Port serial control register.
+ * Misc definitions.
  */
-#define SET_MII_SPEED_TO_100			(1 << 24)
-#define SET_GMII_SPEED_TO_1000			(1 << 23)
-#define SET_FULL_DUPLEX_MODE			(1 << 21)
-#define MAX_RX_PACKET_9700BYTE			(5 << 17)
-#define DISABLE_AUTO_NEG_SPEED_GMII		(1 << 13)
-#define DO_NOT_FORCE_LINK_FAIL			(1 << 10)
-#define SERIAL_PORT_CONTROL_RESERVED		(1 << 9)
-#define DISABLE_AUTO_NEG_FOR_FLOW_CTRL		(1 << 3)
-#define DISABLE_AUTO_NEG_FOR_DUPLEX		(1 << 2)
-#define FORCE_LINK_PASS				(1 << 1)
-#define SERIAL_PORT_ENABLE			(1 << 0)
-
-#define DEFAULT_RX_QUEUE_SIZE		128
-#define DEFAULT_TX_QUEUE_SIZE		256
+#define DEFAULT_RX_QUEUE_SIZE	128
+#define DEFAULT_TX_QUEUE_SIZE	256
+#define SKB_DMA_REALIGN		((PAGE_SIZE - NET_SKB_PAD) % SMP_CACHE_BYTES)
 
 
 /*
@@ -393,6 +395,7 @@ struct mv643xx_eth_private {
 	struct work_struct tx_timeout_task;
 
 	struct napi_struct napi;
+	u32 int_mask;
 	u8 oom;
 	u8 work_link;
 	u8 work_tx;
@@ -651,23 +654,20 @@ static int rxq_refill(struct rx_queue *rxq, int budget)
 	refilled = 0;
 	while (refilled < budget && rxq->rx_desc_count < rxq->rx_ring_size) {
 		struct sk_buff *skb;
-		int unaligned;
 		int rx;
 		struct rx_desc *rx_desc;
 
 		skb = __skb_dequeue(&mp->rx_recycle);
 		if (skb == NULL)
-			skb = dev_alloc_skb(mp->skb_size +
-					    dma_get_cache_alignment() - 1);
+			skb = dev_alloc_skb(mp->skb_size);
 
 		if (skb == NULL) {
 			mp->oom = 1;
 			goto oom;
 		}
 
-		unaligned = (u32)skb->data & (dma_get_cache_alignment() - 1);
-		if (unaligned)
-			skb_reserve(skb, dma_get_cache_alignment() - unaligned);
+		if (SKB_DMA_REALIGN)
+			skb_reserve(skb, SKB_DMA_REALIGN);
 
 		refilled++;
 		rxq->rx_desc_count++;
@@ -969,8 +969,7 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force)
 		if (skb != NULL) {
 			if (skb_queue_len(&mp->rx_recycle) <
 					mp->rx_ring_size &&
-			    skb_recycle_check(skb, mp->skb_size +
-					dma_get_cache_alignment() - 1))
+			    skb_recycle_check(skb, mp->skb_size))
 				__skb_queue_head(&mp->rx_recycle, skb);
 			else
 				dev_kfree_skb(skb);
@@ -1723,20 +1722,20 @@ static void uc_addr_set(struct mv643xx_eth_private *mp, unsigned char *addr)
 
 static u32 uc_addr_filter_mask(struct net_device *dev)
 {
-	struct dev_addr_list *uc_ptr;
+	struct netdev_hw_addr *ha;
 	u32 nibbles;
 
 	if (dev->flags & IFF_PROMISC)
 		return 0;
 
 	nibbles = 1 << (dev->dev_addr[5] & 0x0f);
-	for (uc_ptr = dev->uc_list; uc_ptr != NULL; uc_ptr = uc_ptr->next) {
-		if (memcmp(dev->dev_addr, uc_ptr->da_addr, 5))
+	list_for_each_entry(ha, &dev->uc_list, list) {
+		if (memcmp(dev->dev_addr, ha->addr, 5))
 			return 0;
-		if ((dev->dev_addr[5] ^ uc_ptr->da_addr[5]) & 0xf0)
+		if ((dev->dev_addr[5] ^ ha->addr[5]) & 0xf0)
 			return 0;
 
-		nibbles |= 1 << (uc_ptr->da_addr[5] & 0x0f);
+		nibbles |= 1 << (ha->addr[5] & 0x0f);
 	}
 
 	return nibbles;
@@ -1810,7 +1809,6 @@ static void mv643xx_eth_program_multicast_filter(struct net_device *dev)
 	if (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) {
 		int port_num;
 		u32 accept;
-		int i;
 
 oom:
 		port_num = mp->port_num;
@@ -2067,15 +2065,16 @@ static int mv643xx_eth_collect_events(struct mv643xx_eth_private *mp)
 	u32 int_cause;
 	u32 int_cause_ext;
 
-	int_cause = rdlp(mp, INT_CAUSE) & (INT_TX_END | INT_RX | INT_EXT);
+	int_cause = rdlp(mp, INT_CAUSE) & mp->int_mask;
 	if (int_cause == 0)
 		return 0;
 
 	int_cause_ext = 0;
-	if (int_cause & INT_EXT)
+	if (int_cause & INT_EXT) {
+		int_cause &= ~INT_EXT;
 		int_cause_ext = rdlp(mp, INT_CAUSE_EXT);
+	}
 
-	int_cause &= INT_TX_END | INT_RX;
 	if (int_cause) {
 		wrlp(mp, INT_CAUSE, ~int_cause);
 		mp->work_tx_end |= ((int_cause & INT_TX_END) >> 19) &
@@ -2182,6 +2181,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 		if (mp->work_link) {
 			mp->work_link = 0;
 			handle_link_event(mp);
+			work_done++;
 			continue;
 		}
 
@@ -2220,7 +2220,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 		if (mp->oom)
 			mod_timer(&mp->rx_oom, jiffies + (HZ / 10));
 		napi_complete(napi);
-		wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
+		wrlp(mp, INT_MASK, mp->int_mask);
 	}
 
 	return work_done;
@@ -2341,6 +2341,14 @@ static void mv643xx_eth_recalc_skb_size(struct mv643xx_eth_private *mp)
 	 * size field are ignored by the hardware.
 	 */
 	mp->skb_size = (skb_size + 7) & ~7;
+
+	/*
+	 * If NET_SKB_PAD is smaller than a cache line,
+	 * netdev_alloc_skb() will cause skb->data to be misaligned
+	 * to a cache line boundary.  If this is the case, include
+	 * some extra space to allow re-aligning the data area.
+	 */
+	mp->skb_size += SKB_DMA_REALIGN;
 }
 
 static int mv643xx_eth_open(struct net_device *dev)
@@ -2366,6 +2374,8 @@ static int mv643xx_eth_open(struct net_device *dev)
 
 	skb_queue_head_init(&mp->rx_recycle);
 
+	mp->int_mask = INT_EXT;
+
 	for (i = 0; i < mp->rxq_count; i++) {
 		err = rxq_init(mp, i);
 		if (err) {
@@ -2375,6 +2385,7 @@ static int mv643xx_eth_open(struct net_device *dev)
 		}
 
 		rxq_refill(mp->rxq + i, INT_MAX);
+		mp->int_mask |= INT_RX_0 << i;
 	}
 
 	if (mp->oom) {
@@ -2389,12 +2400,13 @@ static int mv643xx_eth_open(struct net_device *dev)
 				txq_deinit(mp->txq + i);
 			goto out_free;
 		}
+		mp->int_mask |= INT_TX_END_0 << i;
 	}
 
 	port_start(mp);
 
 	wrlp(mp, INT_MASK_EXT, INT_EXT_LINK_PHY | INT_EXT_TX);
-	wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
+	wrlp(mp, INT_MASK, mp->int_mask);
 
 	return 0;
 
@@ -2538,7 +2550,7 @@ static void mv643xx_eth_netpoll(struct net_device *dev)
 
 	mv643xx_eth_irq(dev->irq, dev);
 
-	wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
+	wrlp(mp, INT_MASK, mp->int_mask);
 }
 #endif
 
diff --git a/drivers/net/mvme147.c b/drivers/net/mvme147.c
index 435e5a847c4..93c709d63e2 100644
--- a/drivers/net/mvme147.c
+++ b/drivers/net/mvme147.c
@@ -57,6 +57,17 @@ typedef void (*writerap_t)(void *, unsigned short);
 typedef void (*writerdp_t)(void *, unsigned short);
 typedef unsigned short (*readrdp_t)(void *);
 
+static const struct net_device_ops lance_netdev_ops = {
+	.ndo_open		= m147lance_open,
+	.ndo_stop		= m147lance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_tx_timeout		= lance_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 /* Initialise the one and only on-board 7990 */
 struct net_device * __init mvme147lance_probe(int unit)
 {
@@ -81,11 +92,7 @@ struct net_device * __init mvme147lance_probe(int unit)
 
 	/* Fill the dev fields */
 	dev->base_addr = (unsigned long)MVME147_LANCE_BASE;
-	dev->open = &m147lance_open;
-	dev->stop = &m147lance_close;
-	dev->hard_start_xmit = &lance_start_xmit;
-	dev->set_multicast_list = &lance_set_multicast;
-	dev->tx_timeout = &lance_tx_timeout;
+	dev->netdev_ops = &lance_netdev_ops;
 	dev->dma = 0;
 
 	addr=(u_long *)ETHERNET_ADDRESS;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index f2c4a665e93..1f6e36ea669 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.4-1.401"
+#define MYRI10GE_VERSION_STR "1.5.0-1.418"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -255,6 +255,7 @@ struct myri10ge_priv {
 	u32 read_write_dma;
 	u32 link_changes;
 	u32 msg_enable;
+	unsigned int board_number;
 };
 
 static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
@@ -266,6 +267,13 @@ static char *myri10ge_fw_name = NULL;
 module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
 
+#define MYRI10GE_MAX_BOARDS 8
+static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
+    {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
+module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
+			 0444);
+MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image names per board");
+
 static int myri10ge_ecrc_enable = 1;
 module_param(myri10ge_ecrc_enable, int, S_IRUGO);
 MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
@@ -319,10 +327,6 @@ static int myri10ge_debug = -1;	/* defaults above */
 module_param(myri10ge_debug, int, 0);
 MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
 
-static int myri10ge_lro = 1;
-module_param(myri10ge_lro, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_lro, "Enable large receive offload");
-
 static int myri10ge_lro_max_pkts = MYRI10GE_LRO_MAX_PKTS;
 module_param(myri10ge_lro_max_pkts, int, S_IRUGO);
 MODULE_PARM_DESC(myri10ge_lro_max_pkts,
@@ -361,6 +365,8 @@ static inline void put_be32(__be32 val, __be32 __iomem * p)
 	__raw_writel((__force __u32) val, (__force void __iomem *)p);
 }
 
+static struct net_device_stats *myri10ge_get_stats(struct net_device *dev);
+
 static int
 myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
 		  struct myri10ge_cmd *data, int atomic)
@@ -1290,7 +1296,7 @@ myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
 		remainder -= MYRI10GE_ALLOC_SIZE;
 	}
 
-	if (mgp->csum_flag && myri10ge_lro) {
+	if (dev->features & NETIF_F_LRO) {
 		rx_frags[0].page_offset += MXGEFW_PAD;
 		rx_frags[0].size -= MXGEFW_PAD;
 		len -= MXGEFW_PAD;
@@ -1412,6 +1418,7 @@ myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
 {
 	struct myri10ge_rx_done *rx_done = &ss->rx_done;
 	struct myri10ge_priv *mgp = ss->mgp;
+	struct net_device *netdev = mgp->dev;
 	unsigned long rx_bytes = 0;
 	unsigned long rx_packets = 0;
 	unsigned long rx_ok;
@@ -1445,7 +1452,7 @@ myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
 	ss->stats.rx_packets += rx_packets;
 	ss->stats.rx_bytes += rx_bytes;
 
-	if (myri10ge_lro)
+	if (netdev->features & NETIF_F_LRO)
 		lro_flush_all(&rx_done->lro_mgr);
 
 	/* restock receive rings if needed */
@@ -1686,7 +1693,7 @@ myri10ge_get_ringparam(struct net_device *netdev,
 	ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
 	ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
 	ring->rx_jumbo_max_pending = 0;
-	ring->tx_max_pending = mgp->ss[0].rx_small.mask + 1;
+	ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
 	ring->rx_mini_pending = ring->rx_mini_max_pending;
 	ring->rx_pending = ring->rx_max_pending;
 	ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
@@ -1706,12 +1713,17 @@ static u32 myri10ge_get_rx_csum(struct net_device *netdev)
 static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
 {
 	struct myri10ge_priv *mgp = netdev_priv(netdev);
+	int err = 0;
 
 	if (csum_enabled)
 		mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
-	else
+	else {
+		u32 flags = ethtool_op_get_flags(netdev);
+		err = ethtool_op_set_flags(netdev, (flags & ~ETH_FLAG_LRO));
 		mgp->csum_flag = 0;
-	return 0;
+
+	}
+	return err;
 }
 
 static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
@@ -1803,6 +1815,8 @@ myri10ge_get_ethtool_stats(struct net_device *netdev,
 	int slice;
 	int i;
 
+	/* force stats update */
+	(void)myri10ge_get_stats(netdev);
 	for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
 		data[i] = ((unsigned long *)&mgp->stats)[i];
 
@@ -1892,7 +1906,9 @@ static const struct ethtool_ops myri10ge_ethtool_ops = {
 	.get_sset_count = myri10ge_get_sset_count,
 	.get_ethtool_stats = myri10ge_get_ethtool_stats,
 	.set_msglevel = myri10ge_set_msglevel,
-	.get_msglevel = myri10ge_get_msglevel
+	.get_msglevel = myri10ge_get_msglevel,
+	.get_flags = ethtool_op_get_flags,
+	.set_flags = ethtool_op_set_flags
 };
 
 static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
@@ -2671,7 +2687,7 @@ again:
 		/* we are out of transmit resources */
 		tx->stop_queue++;
 		netif_tx_stop_queue(netdev_queue);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Setup checksum offloading, if needed */
@@ -2876,7 +2892,6 @@ again:
 		tx->stop_queue++;
 		netif_tx_stop_queue(netdev_queue);
 	}
-	dev->trans_start = jiffies;
 	return 0;
 
 abort_linearize:
@@ -2969,6 +2984,7 @@ static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
 	struct net_device_stats *stats = &mgp->stats;
 	int i;
 
+	spin_lock(&mgp->stats_lock);
 	memset(stats, 0, sizeof(*stats));
 	for (i = 0; i < mgp->num_slices; i++) {
 		slice_stats = &mgp->ss[i].stats;
@@ -2979,6 +2995,7 @@ static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
 		stats->rx_dropped += slice_stats->rx_dropped;
 		stats->tx_dropped += slice_stats->tx_dropped;
 	}
+	spin_unlock(&mgp->stats_lock);
 	return stats;
 }
 
@@ -3253,6 +3270,8 @@ abort:
 
 static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
 {
+	int overridden = 0;
+
 	if (myri10ge_force_firmware == 0) {
 		int link_width, exp_cap;
 		u16 lnk;
@@ -3286,10 +3305,18 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
 		}
 	}
 	if (myri10ge_fw_name != NULL) {
-		dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
-			 myri10ge_fw_name);
+		overridden = 1;
 		mgp->fw_name = myri10ge_fw_name;
 	}
+	if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
+	    myri10ge_fw_names[mgp->board_number] != NULL &&
+	    strlen(myri10ge_fw_names[mgp->board_number])) {
+		mgp->fw_name = myri10ge_fw_names[mgp->board_number];
+		overridden = 1;
+	}
+	if (overridden)
+		dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
+			 mgp->fw_name);
 }
 
 #ifdef CONFIG_PM
@@ -3754,6 +3781,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int status = -ENXIO;
 	int dac_enabled;
 	unsigned hdr_offset, ss_offset;
+	static int board_number;
 
 	netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
 	if (netdev == NULL) {
@@ -3770,6 +3798,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	mgp->pause = myri10ge_flow_control;
 	mgp->intr_coal_delay = myri10ge_intr_coal_delay;
 	mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
+	mgp->board_number = board_number;
 	init_waitqueue_head(&mgp->down_wq);
 
 	if (pci_enable_device(pdev)) {
@@ -3884,6 +3913,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (dac_enabled)
 		netdev->features |= NETIF_F_HIGHDMA;
+	netdev->features |= NETIF_F_LRO;
+
+	netdev->vlan_features |= mgp->features;
+	if (mgp->fw_ver_tiny < 37)
+		netdev->vlan_features &= ~NETIF_F_TSO6;
+	if (mgp->fw_ver_tiny < 32)
+		netdev->vlan_features &= ~NETIF_F_TSO;
 
 	/* make sure we can get an irq, and that MSI can be
 	 * setup (if available).  Also ensure netdev->irq
@@ -3902,6 +3938,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
 		    (unsigned long)mgp);
 
+	spin_lock_init(&mgp->stats_lock);
 	SET_ETHTOOL_OPS(netdev, &myri10ge_ethtool_ops);
 	INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
 	status = register_netdev(netdev);
@@ -3919,6 +3956,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			 netdev->irq, mgp->tx_boundary, mgp->fw_name,
 			 (mgp->wc_enabled ? "Enabled" : "Disabled"));
 
+	board_number++;
 	return 0;
 
 abort_with_state:
@@ -4008,6 +4046,8 @@ static struct pci_device_id myri10ge_pci_tbl[] = {
 	{0},
 };
 
+MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
+
 static struct pci_driver myri10ge_driver = {
 	.name = "myri10ge",
 	.probe = myri10ge_probe,
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 9a802adba9a..5f0758bda6b 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -640,7 +640,7 @@ static int myri_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!TX_BUFFS_AVAIL(head, tail)) {
 		DTX(("no buffs available, returning 1\n"));
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	spin_lock_irqsave(&mp->irq_lock, flags);
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index 7d83896b8c2..3fcebb70151 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -374,7 +374,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
 	dev->ethtool_ops = &ne2k_pci_ethtool_ops;
 	NS8390_init(dev, 0);
 
-	memcpy(dev->dev_addr, SA_prom, 6);
+	memcpy(dev->dev_addr, SA_prom, dev->addr_len);
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
 	i = register_netdev(dev);
diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
index 6a843f7350a..a00bbfb9aed 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ne3210.c
@@ -104,7 +104,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 	}
 
 	SET_NETDEV_DEV(dev, device);
-	device->driver_data = dev;
+	dev_set_drvdata(device, dev);
 	ioaddr = edev->base_addr;
 
 	if (!request_region(ioaddr, NE3210_IO_EXTENT, DRV_NAME)) {
@@ -225,7 +225,7 @@ static int __init ne3210_eisa_probe (struct device *device)
 
 static int __devexit ne3210_eisa_remove (struct device *device)
 {
-	struct net_device  *dev    = device->driver_data;
+	struct net_device  *dev    = dev_get_drvdata(device);
 	unsigned long       ioaddr = to_eisa_device (device)->base_addr;
 
 	unregister_netdev (dev);
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index 1861d5bbd96..946366dcc99 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -301,6 +301,17 @@ netx_eth_phy_write(struct net_device *ndev, int phy_id, int reg, int value)
 	while (readl(NETX_MIIMU) & MIIMU_SNRDY);
 }
 
+static const struct net_device_ops netx_eth_netdev_ops = {
+	.ndo_open		= netx_eth_open,
+	.ndo_stop		= netx_eth_close,
+	.ndo_start_xmit		= netx_eth_hard_start_xmit,
+	.ndo_tx_timeout		= netx_eth_timeout,
+	.ndo_set_multicast_list	= netx_eth_set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int netx_eth_enable(struct net_device *ndev)
 {
 	struct netx_eth_priv *priv = netdev_priv(ndev);
@@ -309,12 +320,8 @@ static int netx_eth_enable(struct net_device *ndev)
 
 	ether_setup(ndev);
 
-	ndev->open = netx_eth_open;
-	ndev->stop = netx_eth_close;
-	ndev->hard_start_xmit = netx_eth_hard_start_xmit;
-	ndev->tx_timeout = netx_eth_timeout;
+	ndev->netdev_ops = &netx_eth_netdev_ops;
 	ndev->watchdog_timeo = msecs_to_jiffies(5000);
-	ndev->set_multicast_list = netx_eth_set_multicast_list;
 
 	priv->msg_enable       = NETIF_MSG_LINK;
 	priv->mii.phy_id_mask  = 0x1f;
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index c40815169f3..ab11c2b3f0f 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -34,10 +34,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
 #include <linux/netdevice.h>
@@ -46,21 +42,16 @@
 #include <linux/in.h>
 #include <linux/tcp.h>
 #include <linux/skbuff.h>
+#include <linux/firmware.h>
 
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#include <linux/interrupt.h>
 #include <linux/timer.h>
 
-#include <linux/mm.h>
-#include <linux/mman.h>
 #include <linux/vmalloc.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
 
 #include "netxen_nic_hw.h"
 
@@ -84,10 +75,10 @@
 	(sizeof(struct netxen_rx_buffer) * rds_ring->num_desc)
 #define STATUS_DESC_RINGSIZE(sds_ring)	\
 	(sizeof(struct status_desc) * (sds_ring)->num_desc)
-#define TX_BUFF_RINGSIZE(adapter)	\
-	(sizeof(struct netxen_cmd_buffer) * adapter->num_txd)
-#define TX_DESC_RINGSIZE(adapter)	\
-	(sizeof(struct cmd_desc_type0) * adapter->num_txd)
+#define TX_BUFF_RINGSIZE(tx_ring)	\
+	(sizeof(struct netxen_cmd_buffer) * tx_ring->num_desc)
+#define TX_DESC_RINGSIZE(tx_ring)	\
+	(sizeof(struct cmd_desc_type0) * tx_ring->num_desc)
 
 #define find_diff_among(a,b,range) ((a)<(b)?((b)-(a)):((b)+(range)-(a)))
 
@@ -118,6 +109,7 @@
 #define NX_P3_A2		0x30
 #define NX_P3_B0		0x40
 #define NX_P3_B1		0x41
+#define NX_P3_B2		0x42
 
 #define NX_IS_REVISION_P2(REVISION)     (REVISION <= NX_P2_C1)
 #define NX_IS_REVISION_P3(REVISION)     (REVISION >= NX_P3_A0)
@@ -203,18 +195,10 @@
 #define MAX_RCV_DESCRIPTORS_10G		4096
 #define MAX_JUMBO_RCV_DESCRIPTORS	1024
 #define MAX_LRO_RCV_DESCRIPTORS		8
-#define MAX_RCVSTATUS_DESCRIPTORS	MAX_RCV_DESCRIPTORS
-#define MAX_JUMBO_RCV_DESC	MAX_JUMBO_RCV_DESCRIPTORS
-#define MAX_RCV_DESC		MAX_RCV_DESCRIPTORS
-#define MAX_RCVSTATUS_DESC	MAX_RCV_DESCRIPTORS
-#define MAX_EPG_DESCRIPTORS	(MAX_CMD_DESCRIPTORS * 8)
-#define NUM_RCV_DESC		(MAX_RCV_DESC + MAX_JUMBO_RCV_DESCRIPTORS + \
-				 MAX_LRO_RCV_DESCRIPTORS)
-#define MIN_TX_COUNT	4096
-#define MIN_RX_COUNT	4096
 #define NETXEN_CTX_SIGNATURE	0xdee0
+#define NETXEN_CTX_SIGNATURE_V2	0x0002dee0
+#define NETXEN_CTX_RESET	0xbad0
 #define NETXEN_RCV_PRODUCER(ringid)	(ringid)
-#define MAX_FRAME_SIZE	0x10000	/* 64K MAX size for LSO */
 
 #define PHAN_PEG_RCV_INITIALIZED	0xff01
 #define PHAN_PEG_RCV_START_INITIALIZE	0xff00
@@ -253,12 +237,19 @@ typedef u32 netxen_ctx_msg;
 #define netxen_set_msg_opcode(config_word, val)	\
 	((config_word) &= ~(0xf<<28), (config_word) |= (val & 0xf) << 28)
 
-struct netxen_rcv_context {
-	__le64 rcv_ring_addr;
-	__le32 rcv_ring_size;
+struct netxen_rcv_ring {
+	__le64 addr;
+	__le32 size;
 	__le32 rsrvd;
 };
 
+struct netxen_sts_ring {
+	__le64 addr;
+	__le32 size;
+	__le16 msi_index;
+	__le16 rsvd;
+} ;
+
 struct netxen_ring_ctx {
 
 	/* one command ring */
@@ -268,13 +259,18 @@ struct netxen_ring_ctx {
 	__le32 rsrvd;
 
 	/* three receive rings */
-	struct netxen_rcv_context rcv_ctx[3];
+	struct netxen_rcv_ring rcv_rings[NUM_RCV_DESC_RINGS];
 
-	/* one status ring */
 	__le64 sts_ring_addr;
 	__le32 sts_ring_size;
 
 	__le32 ctx_id;
+
+	__le64 rsrvd_2[3];
+	__le32 sts_ring_count;
+	__le32 rsrvd_3;
+	struct netxen_sts_ring sts_rings[NUM_STS_DESC_RINGS];
+
 } __attribute__ ((aligned(64)));
 
 /*
@@ -373,6 +369,7 @@ struct rcv_desc {
 /* opcode field in status_desc */
 #define NETXEN_NIC_RXPKT_DESC  0x04
 #define NETXEN_OLD_RXPKT_DESC  0x3f
+#define NETXEN_NIC_RESPONSE_DESC 0x05
 
 /* for status field in status_desc */
 #define STATUS_NEED_CKSUM	(1)
@@ -382,13 +379,11 @@ struct rcv_desc {
 #define STATUS_OWNER_HOST	(0x1ULL << 56)
 #define STATUS_OWNER_PHANTOM	(0x2ULL << 56)
 
-/* Note: sizeof(status_desc) should always be a mutliple of 2 */
-
-#define netxen_get_sts_desc_lro_cnt(status_desc)	\
-	((status_desc)->lro & 0x7F)
-#define netxen_get_sts_desc_lro_last_frag(status_desc)	\
-	(((status_desc)->lro & 0x80) >> 7)
-
+/* Status descriptor:
+   0-3 port, 4-7 status, 8-11 type, 12-27 total_length
+   28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
+   53-55 desc_cnt, 56-57 owner, 58-63 opcode
+ */
 #define netxen_get_sts_port(sts_data)	\
 	((sts_data) & 0x0F)
 #define netxen_get_sts_status(sts_data)	\
@@ -403,41 +398,15 @@ struct rcv_desc {
 	(((sts_data) >> 44) & 0x0F)
 #define netxen_get_sts_pkt_offset(sts_data)	\
 	(((sts_data) >> 48) & 0x1F)
+#define netxen_get_sts_desc_cnt(sts_data)	\
+	(((sts_data) >> 53) & 0x7)
 #define netxen_get_sts_opcode(sts_data)	\
 	(((sts_data) >> 58) & 0x03F)
 
 struct status_desc {
-	/* Bit pattern: 0-3 port, 4-7 status, 8-11 type, 12-27 total_length
-	   28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
-	   53-55 desc_cnt, 56-57 owner, 58-63 opcode
-	 */
-	__le64 status_desc_data;
-	union {
-		struct {
-			__le32 hash_value;
-			u8 hash_type;
-			u8 msg_type;
-			u8 unused;
-			union {
-				/* Bit pattern: 0-6 lro_count indicates frag
-				 * sequence, 7 last_frag indicates last frag
-				 */
-				u8 lro;
-
-				/* chained buffers */
-				u8 nr_frags;
-			};
-		};
-		struct {
-			__le16 frag_handles[4];
-		};
-	};
+	__le64 status_desc_data[2];
 } __attribute__ ((aligned(16)));
 
-enum {
-	NETXEN_RCV_PEG_0 = 0,
-	NETXEN_RCV_PEG_1
-};
 /* The version of the main data structure */
 #define	NETXEN_BDINFO_VERSION 1
 
@@ -447,85 +416,35 @@ enum {
 /* Max number of Gig ports on a Phantom board */
 #define NETXEN_MAX_PORTS 4
 
-typedef enum {
-	NETXEN_BRDTYPE_P1_BD = 0x0000,
-	NETXEN_BRDTYPE_P1_SB = 0x0001,
-	NETXEN_BRDTYPE_P1_SMAX = 0x0002,
-	NETXEN_BRDTYPE_P1_SOCK = 0x0003,
-
-	NETXEN_BRDTYPE_P2_SOCK_31 = 0x0008,
-	NETXEN_BRDTYPE_P2_SOCK_35 = 0x0009,
-	NETXEN_BRDTYPE_P2_SB35_4G = 0x000a,
-	NETXEN_BRDTYPE_P2_SB31_10G = 0x000b,
-	NETXEN_BRDTYPE_P2_SB31_2G = 0x000c,
-
-	NETXEN_BRDTYPE_P2_SB31_10G_IMEZ = 0x000d,
-	NETXEN_BRDTYPE_P2_SB31_10G_HMEZ = 0x000e,
-	NETXEN_BRDTYPE_P2_SB31_10G_CX4 = 0x000f,
-
-	NETXEN_BRDTYPE_P3_REF_QG = 0x0021,
-	NETXEN_BRDTYPE_P3_HMEZ = 0x0022,
-	NETXEN_BRDTYPE_P3_10G_CX4_LP = 0x0023,
-	NETXEN_BRDTYPE_P3_4_GB = 0x0024,
-	NETXEN_BRDTYPE_P3_IMEZ = 0x0025,
-	NETXEN_BRDTYPE_P3_10G_SFP_PLUS = 0x0026,
-	NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027,
-	NETXEN_BRDTYPE_P3_XG_LOM = 0x0028,
-	NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029,
-	NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
-	NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
-	NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
-	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032,
-	NETXEN_BRDTYPE_P3_10G_TP = 0x0080
-
-} netxen_brdtype_t;
-
-typedef enum {
-	NETXEN_BRDMFG_INVENTEC = 1
-} netxen_brdmfg;
-
-typedef enum {
-	MEM_ORG_128Mbx4 = 0x0,	/* DDR1 only */
-	MEM_ORG_128Mbx8 = 0x1,	/* DDR1 only */
-	MEM_ORG_128Mbx16 = 0x2,	/* DDR1 only */
-	MEM_ORG_256Mbx4 = 0x3,
-	MEM_ORG_256Mbx8 = 0x4,
-	MEM_ORG_256Mbx16 = 0x5,
-	MEM_ORG_512Mbx4 = 0x6,
-	MEM_ORG_512Mbx8 = 0x7,
-	MEM_ORG_512Mbx16 = 0x8,
-	MEM_ORG_1Gbx4 = 0x9,
-	MEM_ORG_1Gbx8 = 0xa,
-	MEM_ORG_1Gbx16 = 0xb,
-	MEM_ORG_2Gbx4 = 0xc,
-	MEM_ORG_2Gbx8 = 0xd,
-	MEM_ORG_2Gbx16 = 0xe,
-	MEM_ORG_128Mbx32 = 0x10002,	/* GDDR only */
-	MEM_ORG_256Mbx32 = 0x10005	/* GDDR only */
-} netxen_mn_mem_org_t;
-
-typedef enum {
-	MEM_ORG_512Kx36 = 0x0,
-	MEM_ORG_1Mx36 = 0x1,
-	MEM_ORG_2Mx36 = 0x2
-} netxen_sn_mem_org_t;
-
-typedef enum {
-	MEM_DEPTH_4MB = 0x1,
-	MEM_DEPTH_8MB = 0x2,
-	MEM_DEPTH_16MB = 0x3,
-	MEM_DEPTH_32MB = 0x4,
-	MEM_DEPTH_64MB = 0x5,
-	MEM_DEPTH_128MB = 0x6,
-	MEM_DEPTH_256MB = 0x7,
-	MEM_DEPTH_512MB = 0x8,
-	MEM_DEPTH_1GB = 0x9,
-	MEM_DEPTH_2GB = 0xa,
-	MEM_DEPTH_4GB = 0xb,
-	MEM_DEPTH_8GB = 0xc,
-	MEM_DEPTH_16GB = 0xd,
-	MEM_DEPTH_32GB = 0xe
-} netxen_mem_depth_t;
+#define NETXEN_BRDTYPE_P1_BD		0x0000
+#define NETXEN_BRDTYPE_P1_SB		0x0001
+#define NETXEN_BRDTYPE_P1_SMAX		0x0002
+#define NETXEN_BRDTYPE_P1_SOCK		0x0003
+
+#define NETXEN_BRDTYPE_P2_SOCK_31	0x0008
+#define NETXEN_BRDTYPE_P2_SOCK_35	0x0009
+#define NETXEN_BRDTYPE_P2_SB35_4G	0x000a
+#define NETXEN_BRDTYPE_P2_SB31_10G	0x000b
+#define NETXEN_BRDTYPE_P2_SB31_2G	0x000c
+
+#define NETXEN_BRDTYPE_P2_SB31_10G_IMEZ		0x000d
+#define NETXEN_BRDTYPE_P2_SB31_10G_HMEZ		0x000e
+#define NETXEN_BRDTYPE_P2_SB31_10G_CX4		0x000f
+
+#define NETXEN_BRDTYPE_P3_REF_QG	0x0021
+#define NETXEN_BRDTYPE_P3_HMEZ		0x0022
+#define NETXEN_BRDTYPE_P3_10G_CX4_LP	0x0023
+#define NETXEN_BRDTYPE_P3_4_GB		0x0024
+#define NETXEN_BRDTYPE_P3_IMEZ		0x0025
+#define NETXEN_BRDTYPE_P3_10G_SFP_PLUS	0x0026
+#define NETXEN_BRDTYPE_P3_10000_BASE_T	0x0027
+#define NETXEN_BRDTYPE_P3_XG_LOM	0x0028
+#define NETXEN_BRDTYPE_P3_4_GB_MM	0x0029
+#define NETXEN_BRDTYPE_P3_10G_SFP_CT	0x002a
+#define NETXEN_BRDTYPE_P3_10G_SFP_QT	0x002b
+#define NETXEN_BRDTYPE_P3_10G_CX4	0x0031
+#define NETXEN_BRDTYPE_P3_10G_XFP	0x0032
+#define NETXEN_BRDTYPE_P3_10G_TP	0x0080
 
 struct netxen_board_info {
 	u32 header_version;
@@ -676,17 +595,15 @@ struct netxen_new_user_info {
 #define PRIMARY_IMAGE_BAD	0xffffffff
 
 /* Flash memory map */
-typedef enum {
-	NETXEN_CRBINIT_START = 0,	/* Crbinit section */
-	NETXEN_BRDCFG_START = 0x4000,	/* board config */
-	NETXEN_INITCODE_START = 0x6000,	/* pegtune code */
-	NETXEN_BOOTLD_START = 0x10000,	/* bootld */
-	NETXEN_IMAGE_START = 0x43000,	/* compressed image */
-	NETXEN_SECONDARY_START = 0x200000,	/* backup images */
-	NETXEN_PXE_START = 0x3E0000,	/* user defined region */
-	NETXEN_USER_START = 0x3E8000,	/* User defined region for new boards */
-	NETXEN_FIXED_START = 0x3F0000	/* backup of crbinit */
-} netxen_flash_map_t;
+#define NETXEN_CRBINIT_START	0	/* crbinit section */
+#define NETXEN_BRDCFG_START	0x4000	/* board config */
+#define NETXEN_INITCODE_START	0x6000	/* pegtune code */
+#define NETXEN_BOOTLD_START	0x10000	/* bootld */
+#define NETXEN_IMAGE_START	0x43000	/* compressed image */
+#define NETXEN_SECONDARY_START	0x200000	/* backup images */
+#define NETXEN_PXE_START	0x3E0000	/* PXE boot rom */
+#define NETXEN_USER_START	0x3E8000	/* Firmare info */
+#define NETXEN_FIXED_START	0x3F0000	/* backup of crbinit */
 
 #define NX_FW_VERSION_OFFSET	(NETXEN_USER_START+0x408)
 #define NX_FW_SIZE_OFFSET	(NETXEN_USER_START+0x40c)
@@ -708,21 +625,8 @@ typedef enum {
 #define NETXEN_FLASH_SECONDARY_SIZE 	(NETXEN_USER_START-NETXEN_SECONDARY_START)
 #define NETXEN_NUM_PRIMARY_SECTORS	(0x20)
 #define NETXEN_NUM_CONFIG_SECTORS 	(1)
-#define PFX "NetXen: "
 extern char netxen_nic_driver_name[];
 
-/* Note: Make sure to not call this before adapter->port is valid */
-#if !defined(NETXEN_DEBUG)
-#define DPRINTK(klevel, fmt, args...)	do { \
-	} while (0)
-#else
-#define DPRINTK(klevel, fmt, args...)	do { \
-	printk(KERN_##klevel PFX "%s: %s: " fmt, __func__,\
-		(adapter != NULL && adapter->netdev != NULL) ? \
-		adapter->netdev->name : NULL, \
-		## args); } while(0)
-#endif
-
 /* Number of status descriptors to handle per interrupt */
 #define MAX_STATUS_HANDLE	(64)
 
@@ -732,7 +636,7 @@ extern char netxen_nic_driver_name[];
  */
 struct netxen_skb_frag {
 	u64 dma;
-	ulong length;
+	u64 length;
 };
 
 #define _netxen_set_bits(config_word, start, bits, val)	{\
@@ -793,34 +697,24 @@ struct netxen_hardware_context {
 
 	u8 cut_through;
 	u8 revision_id;
+	u8 pci_func;
+	u8 linkup;
 	u16 port_type;
-	int board_type;
-	u32 linkup;
-	/* Address of cmd ring in Phantom */
-	struct cmd_desc_type0 *cmd_desc_head;
-	dma_addr_t cmd_desc_phys_addr;
-	struct netxen_adapter *adapter;
-	int pci_func;
+	u16 board_type;
 };
 
 #define MINIMUM_ETHERNET_FRAME_SIZE	64	/* With FCS */
 #define ETHERNET_FCS_SIZE		4
 
 struct netxen_adapter_stats {
-	u64  rcvdbadskb;
 	u64  xmitcalled;
-	u64  xmitedframes;
 	u64  xmitfinished;
-	u64  badskblen;
-	u64  nocmddescriptor;
-	u64  polled;
 	u64  rxdropped;
 	u64  txdropped;
 	u64  csummed;
 	u64  no_rcv;
 	u64  rxbytes;
 	u64  txbytes;
-	u64  ints;
 };
 
 /*
@@ -852,14 +746,25 @@ struct nx_host_sds_ring {
 	struct napi_struct napi;
 	struct list_head free_list[NUM_RCV_DESC_RINGS];
 
-	u16 clean_tx;
-	u16 post_rxd;
 	int irq;
 
 	dma_addr_t phys_addr;
 	char name[IFNAMSIZ+4];
 };
 
+struct nx_host_tx_ring {
+	u32 producer;
+	__le32 *hw_consumer;
+	u32 sw_consumer;
+	u32 crb_cmd_producer;
+	u32 crb_cmd_consumer;
+	u32 num_desc;
+
+	struct netxen_cmd_buffer *cmd_buf_arr;
+	struct cmd_desc_type0 *desc_head;
+	dma_addr_t phys_addr;
+};
+
 /*
  * Receive context. There is one such structure per instance of the
  * receive processing. Any state information that is relevant to
@@ -871,8 +776,11 @@ struct netxen_recv_context {
 	u16 context_id;
 	u16 virt_port;
 
-	struct nx_host_rds_ring rds_rings[NUM_RCV_DESC_RINGS];
-	struct nx_host_sds_ring sds_rings[NUM_STS_DESC_RINGS];
+	struct nx_host_rds_ring *rds_rings;
+	struct nx_host_sds_ring *sds_rings;
+
+	struct netxen_ring_ctx *hwctx;
+	dma_addr_t phys_addr;
 };
 
 /* New HW context creation */
@@ -1111,8 +1019,8 @@ typedef struct {
 #define NETXEN_MAC_DEL	2
 
 typedef struct nx_mac_list_s {
-	struct nx_mac_list_s *next;
-	uint8_t mac_addr[MAX_ADDR_LEN];
+	struct list_head list;
+	uint8_t mac_addr[ETH_ALEN+2];
 } nx_mac_list_t;
 
 /*
@@ -1154,31 +1062,118 @@ typedef struct {
 
 #define NX_MAC_EVENT		0x1
 
-enum {
-	NX_NIC_H2C_OPCODE_START = 0,
-	NX_NIC_H2C_OPCODE_CONFIG_RSS,
-	NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL,
-	NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE,
-	NX_NIC_H2C_OPCODE_CONFIG_LED,
-	NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS,
-	NX_NIC_H2C_OPCODE_CONFIG_L2_MAC,
-	NX_NIC_H2C_OPCODE_LRO_REQUEST,
-	NX_NIC_H2C_OPCODE_GET_SNMP_STATS,
-	NX_NIC_H2C_OPCODE_PROXY_START_REQUEST,
-	NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST,
-	NX_NIC_H2C_OPCODE_PROXY_SET_MTU,
-	NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE,
-	NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST,
-	NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST,
-	NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST,
-	NX_NIC_H2C_OPCODE_GET_NET_STATS,
-	NX_NIC_H2C_OPCODE_LAST
-};
+/*
+ * Driver --> Firmware
+ */
+#define NX_NIC_H2C_OPCODE_START				0
+#define NX_NIC_H2C_OPCODE_CONFIG_RSS			1
+#define NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL		2
+#define NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE		3
+#define NX_NIC_H2C_OPCODE_CONFIG_LED			4
+#define NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS		5
+#define NX_NIC_H2C_OPCODE_CONFIG_L2_MAC			6
+#define NX_NIC_H2C_OPCODE_LRO_REQUEST			7
+#define NX_NIC_H2C_OPCODE_GET_SNMP_STATS		8
+#define NX_NIC_H2C_OPCODE_PROXY_START_REQUEST		9
+#define NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST		10
+#define NX_NIC_H2C_OPCODE_PROXY_SET_MTU			11
+#define NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE	12
+#define NX_NIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST	13
+#define NX_NIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST	14
+#define NX_NIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST	15
+#define NX_NIC_H2C_OPCODE_GET_NET_STATS			16
+#define NX_NIC_H2C_OPCODE_PROXY_UPDATE_P2V		17
+#define NX_NIC_H2C_OPCODE_CONFIG_IPADDR			18
+#define NX_NIC_H2C_OPCODE_CONFIG_LOOPBACK		19
+#define NX_NIC_H2C_OPCODE_PROXY_STOP_DONE		20
+#define NX_NIC_H2C_OPCODE_GET_LINKEVENT			21
+#define NX_NIC_C2C_OPCODE				22
+#define NX_NIC_H2C_OPCODE_LAST				23
+
+/*
+ * Firmware --> Driver
+ */
+
+#define NX_NIC_C2H_OPCODE_START				128
+#define NX_NIC_C2H_OPCODE_CONFIG_RSS_RESPONSE		129
+#define NX_NIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE	130
+#define NX_NIC_C2H_OPCODE_CONFIG_MAC_RESPONSE		131
+#define NX_NIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE	132
+#define NX_NIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE	133
+#define NX_NIC_C2H_OPCODE_LRO_DELETE_RESPONSE		134
+#define NX_NIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE	135
+#define NX_NIC_C2H_OPCODE_GET_SNMP_STATS		136
+#define NX_NIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY	137
+#define NX_NIC_C2H_OPCODE_INSTALL_LICENSE_REPLY		138
+#define NX_NIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139
+#define NX_NIC_C2H_OPCODE_GET_NET_STATS_RESPONSE	140
+#define NX_NIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE	141
+#define NX_NIC_C2H_OPCODE_LAST				142
 
 #define VPORT_MISS_MODE_DROP		0 /* drop all unmatched */
 #define VPORT_MISS_MODE_ACCEPT_ALL	1 /* accept all packets */
 #define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
 
+#define NX_FW_CAPABILITY_LINK_NOTIFICATION	(1 << 5)
+#define NX_FW_CAPABILITY_SWITCHING		(1 << 6)
+
+/* module types */
+#define LINKEVENT_MODULE_NOT_PRESENT			1
+#define LINKEVENT_MODULE_OPTICAL_UNKNOWN		2
+#define LINKEVENT_MODULE_OPTICAL_SRLR			3
+#define LINKEVENT_MODULE_OPTICAL_LRM			4
+#define LINKEVENT_MODULE_OPTICAL_SFP_1G			5
+#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE	6
+#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN	7
+#define LINKEVENT_MODULE_TWINAX				8
+
+#define LINKSPEED_10GBPS	10000
+#define LINKSPEED_1GBPS		1000
+#define LINKSPEED_100MBPS	100
+#define LINKSPEED_10MBPS	10
+
+#define LINKSPEED_ENCODED_10MBPS	0
+#define LINKSPEED_ENCODED_100MBPS	1
+#define LINKSPEED_ENCODED_1GBPS		2
+
+#define LINKEVENT_AUTONEG_DISABLED	0
+#define LINKEVENT_AUTONEG_ENABLED	1
+
+#define LINKEVENT_HALF_DUPLEX		0
+#define LINKEVENT_FULL_DUPLEX		1
+
+#define LINKEVENT_LINKSPEED_MBPS	0
+#define LINKEVENT_LINKSPEED_ENCODED	1
+
+/* firmware response header:
+ *	63:58 - message type
+ *	57:56 - owner
+ *	55:53 - desc count
+ *	52:48 - reserved
+ *	47:40 - completion id
+ *	39:32 - opcode
+ *	31:16 - error code
+ *	15:00 - reserved
+ */
+#define netxen_get_nic_msgtype(msg_hdr)	\
+	((msg_hdr >> 58) & 0x3F)
+#define netxen_get_nic_msg_compid(msg_hdr)	\
+	((msg_hdr >> 40) & 0xFF)
+#define netxen_get_nic_msg_opcode(msg_hdr)	\
+	((msg_hdr >> 32) & 0xFF)
+#define netxen_get_nic_msg_errcode(msg_hdr)	\
+	((msg_hdr >> 16) & 0xFFFF)
+
+typedef struct {
+	union {
+		struct {
+			u64 hdr;
+			u64 body[7];
+		};
+		u64 words[8];
+	};
+} nx_fw_msg_t;
+
 typedef struct {
 	__le64 qhdr;
 	__le64 req_hdr;
@@ -1218,99 +1213,96 @@ struct netxen_adapter {
 
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	int pci_using_dac;
-	struct net_device_stats net_stats;
-	int mtu;
-	int portnum;
-	u8 physical_port;
-	u16 tx_context_id;
-
-	uint8_t		mc_enabled;
-	uint8_t		max_mc_count;
-	nx_mac_list_t	*mac_list;
-
-	struct netxen_legacy_intr_set legacy_intr;
-
-	struct work_struct watchdog_task;
-	struct timer_list watchdog_timer;
-	struct work_struct  tx_timeout_task;
+	struct list_head mac_list;
 
 	u32 curr_window;
 	u32 crb_win;
 	rwlock_t adapter_lock;
 
-	u32 cmd_producer;
-	__le32 *cmd_consumer;
-	u32 last_cmd_consumer;
-	u32 crb_addr_cmd_producer;
-	u32 crb_addr_cmd_consumer;
 	spinlock_t tx_clean_lock;
 
-	u32 num_txd;
-	u32 num_rxd;
-	u32 num_jumbo_rxd;
-	u32 num_lro_rxd;
+	u16 num_txd;
+	u16 num_rxd;
+	u16 num_jumbo_rxd;
+	u16 num_lro_rxd;
+
+	u8 max_rds_rings;
+	u8 max_sds_rings;
+	u8 driver_mismatch;
+	u8 msix_supported;
+	u8 rx_csum;
+	u8 pci_using_dac;
+	u8 portnum;
+	u8 physical_port;
+
+	u8 mc_enabled;
+	u8 max_mc_count;
+	u8 rss_supported;
+	u8 resv2;
+	u32 resv3;
+
+	u8 has_link_events;
+	u8 resv1;
+	u16 tx_context_id;
+	u16 mtu;
+	u16 is_up;
 
-	int max_rds_rings;
-	int max_sds_rings;
+	u16 link_speed;
+	u16 link_duplex;
+	u16 link_autoneg;
+	u16 module_type;
 
+	u32 capabilities;
 	u32 flags;
 	u32 irq;
-	int driver_mismatch;
 	u32 temp;
 
-	u32 fw_major;
-	u32 fw_version;
-
-	int msix_supported;
-	struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+	u32 msi_tgt_status;
+	u32 resv4;
 
 	struct netxen_adapter_stats stats;
 
-	u16 link_speed;
-	u16 link_duplex;
-	u16 state;
-	u16 link_autoneg;
-	int rx_csum;
-
-	struct netxen_cmd_buffer *cmd_buf_arr;	/* Command buffers for xmit */
-
-	/*
-	 * Receive instances. These can be either one per port,
-	 * or one per peg, etc.
-	 */
 	struct netxen_recv_context recv_ctx;
+	struct nx_host_tx_ring *tx_ring;
 
-	int is_up;
-	struct netxen_dummy_dma dummy_dma;
-	nx_nic_intr_coalesce_t coal;
-
-	/* Context interface shared between card and host */
-	struct netxen_ring_ctx *ctx_desc;
-	dma_addr_t ctx_desc_phys_addr;
-	int intr_scheme;
-	int msi_mode;
 	int (*enable_phy_interrupts) (struct netxen_adapter *);
 	int (*disable_phy_interrupts) (struct netxen_adapter *);
-	int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
+	int (*macaddr_set) (struct netxen_adapter *, u8 *);
 	int (*set_mtu) (struct netxen_adapter *, int);
 	int (*set_promisc) (struct netxen_adapter *, u32);
+	void (*set_multi) (struct net_device *);
 	int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
 	int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
 	int (*init_port) (struct netxen_adapter *, int);
 	int (*stop_port) (struct netxen_adapter *);
 
-	int (*hw_read_wx)(struct netxen_adapter *, ulong, void *, int);
-	int (*hw_write_wx)(struct netxen_adapter *, ulong, void *, int);
+	u32 (*hw_read_wx)(struct netxen_adapter *, ulong);
+	int (*hw_write_wx)(struct netxen_adapter *, ulong, u32);
 	int (*pci_mem_read)(struct netxen_adapter *, u64, void *, int);
 	int (*pci_mem_write)(struct netxen_adapter *, u64, void *, int);
 	int (*pci_write_immediate)(struct netxen_adapter *, u64, u32);
 	u32 (*pci_read_immediate)(struct netxen_adapter *, u64);
-	void (*pci_write_normalize)(struct netxen_adapter *, u64, u32);
-	u32 (*pci_read_normalize)(struct netxen_adapter *, u64);
 	unsigned long (*pci_set_window)(struct netxen_adapter *,
 			unsigned long long);
-};				/* netxen_adapter structure */
+
+	struct netxen_legacy_intr_set legacy_intr;
+
+	struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+
+	struct netxen_dummy_dma dummy_dma;
+
+	struct work_struct watchdog_task;
+	struct timer_list watchdog_timer;
+	struct work_struct  tx_timeout_task;
+
+	struct net_device_stats net_stats;
+
+	nx_nic_intr_coalesce_t coal;
+
+	u32 fw_major;
+	u32 fw_version;
+	const struct firmware *fw;
+};
 
 /*
  * NetXen dma watchdog control structure
@@ -1330,46 +1322,6 @@ struct netxen_adapter {
 #define netxen_get_dma_watchdog_disabled(config_word) \
 	(((config_word) >> 1) & 0x1)
 
-/* Max number of xmit producer threads that can run simultaneously */
-#define	MAX_XMIT_PRODUCERS		16
-
-#define PCI_OFFSET_FIRST_RANGE(adapter, off)    \
-	((adapter)->ahw.pci_base0 + (off))
-#define PCI_OFFSET_SECOND_RANGE(adapter, off)   \
-	((adapter)->ahw.pci_base1 + (off) - SECOND_PAGE_GROUP_START)
-#define PCI_OFFSET_THIRD_RANGE(adapter, off)    \
-	((adapter)->ahw.pci_base2 + (off) - THIRD_PAGE_GROUP_START)
-
-static inline void __iomem *pci_base_offset(struct netxen_adapter *adapter,
-					    unsigned long off)
-{
-	if ((off < FIRST_PAGE_GROUP_END) && (off >= FIRST_PAGE_GROUP_START)) {
-		return (adapter->ahw.pci_base0 + off);
-	} else if ((off < SECOND_PAGE_GROUP_END) &&
-		   (off >= SECOND_PAGE_GROUP_START)) {
-		return (adapter->ahw.pci_base1 + off - SECOND_PAGE_GROUP_START);
-	} else if ((off < THIRD_PAGE_GROUP_END) &&
-		   (off >= THIRD_PAGE_GROUP_START)) {
-		return (adapter->ahw.pci_base2 + off - THIRD_PAGE_GROUP_START);
-	}
-	return NULL;
-}
-
-static inline void __iomem *pci_base(struct netxen_adapter *adapter,
-				     unsigned long off)
-{
-	if ((off < FIRST_PAGE_GROUP_END) && (off >= FIRST_PAGE_GROUP_START)) {
-		return adapter->ahw.pci_base0;
-	} else if ((off < SECOND_PAGE_GROUP_END) &&
-		   (off >= SECOND_PAGE_GROUP_START)) {
-		return adapter->ahw.pci_base1;
-	} else if ((off < THIRD_PAGE_GROUP_END) &&
-		   (off >= THIRD_PAGE_GROUP_START)) {
-		return adapter->ahw.pci_base2;
-	}
-	return NULL;
-}
-
 int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter);
 int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter);
 int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter);
@@ -1382,21 +1334,22 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter,
 /* Functions available from netxen_nic_hw.c */
 int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu);
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu);
-void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val);
-int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off);
-void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value);
-void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 *value);
-void netxen_nic_write_w1(struct netxen_adapter *adapter, u32 index, u32 value);
-void netxen_nic_read_w1(struct netxen_adapter *adapter, u32 index, u32 *value);
+
+int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr);
+int netxen_p3_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr);
+
+#define NXRD32(adapter, off) \
+	(adapter->hw_read_wx(adapter, off))
+#define NXWR32(adapter, off, val) \
+	(adapter->hw_write_wx(adapter, off, val))
 
 int netxen_nic_get_board_info(struct netxen_adapter *adapter);
 void netxen_nic_get_firmware_info(struct netxen_adapter *adapter);
 int netxen_nic_wol_supported(struct netxen_adapter *adapter);
 
-int netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len);
+u32 netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter, ulong off);
 int netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len);
+		ulong off, u32 data);
 int netxen_nic_pci_mem_read_128M(struct netxen_adapter *adapter,
 		u64 off, void *data, int size);
 int netxen_nic_pci_mem_write_128M(struct netxen_adapter *adapter,
@@ -1412,16 +1365,13 @@ unsigned long netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
 void netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter,
 		u32 wndw);
 
-int netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len);
+u32 netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter, ulong off);
 int netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len);
+		ulong off, u32 data);
 int netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
 		u64 off, void *data, int size);
 int netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
 		u64 off, void *data, int size);
-void netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
-				 unsigned long off, int data);
 int netxen_nic_pci_write_immediate_2M(struct netxen_adapter *adapter,
 		u64 off, u32 data);
 u32 netxen_nic_pci_read_immediate_2M(struct netxen_adapter *adapter, u64 off);
@@ -1435,8 +1385,9 @@ unsigned long netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 void netxen_free_adapter_offload(struct netxen_adapter *adapter);
 int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
 int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
-int netxen_receive_peg_ready(struct netxen_adapter *adapter);
 int netxen_load_firmware(struct netxen_adapter *adapter);
+void netxen_request_firmware(struct netxen_adapter *adapter);
+void netxen_release_firmware(struct netxen_adapter *adapter);
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
 
 int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
@@ -1475,6 +1426,8 @@ void netxen_p3_free_mac_list(struct netxen_adapter *adapter);
 int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 int netxen_config_rss(struct netxen_adapter *adapter, int enable);
+int netxen_linkevent_request(struct netxen_adapter *adapter, int enable);
+void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup);
 
 int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
@@ -1483,7 +1436,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p);
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
 
 void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
-		uint32_t crb_producer);
+		struct nx_host_tx_ring *tx_ring, uint32_t crb_producer);
 
 /*
  * NetXen Board information
@@ -1491,7 +1444,7 @@ void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
 
 #define NETXEN_MAX_SHORT_NAME 32
 struct netxen_brdinfo {
-	netxen_brdtype_t brdtype;	/* type of board */
+	int brdtype;	/* type of board */
 	long ports;		/* max no of physical ports */
 	char short_name[NETXEN_MAX_SHORT_NAME];
 };
@@ -1541,17 +1494,15 @@ dma_watchdog_shutdown_request(struct netxen_adapter *adapter)
 	u32 ctrl;
 
 	/* check if already inactive */
-	if (adapter->hw_read_wx(adapter,
-	    NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
-		printk(KERN_ERR "failed to read dma watchdog status\n");
+	ctrl = adapter->hw_read_wx(adapter,
+			NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
 
 	if (netxen_get_dma_watchdog_enabled(ctrl) == 0)
 		return 1;
 
 	/* Send the disable request */
 	netxen_set_dma_watchdog_disable_req(ctrl);
-	netxen_crb_writelit_adapter(adapter,
-		NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
+	NXWR32(adapter, NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
 
 	return 0;
 }
@@ -1561,9 +1512,8 @@ dma_watchdog_shutdown_poll_result(struct netxen_adapter *adapter)
 {
 	u32 ctrl;
 
-	if (adapter->hw_read_wx(adapter,
-	    NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
-		printk(KERN_ERR "failed to read dma watchdog status\n");
+	ctrl = adapter->hw_read_wx(adapter,
+			NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
 
 	return (netxen_get_dma_watchdog_enabled(ctrl) == 0);
 }
@@ -1573,9 +1523,8 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 {
 	u32 ctrl;
 
-	if (adapter->hw_read_wx(adapter,
-		NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
-		printk(KERN_ERR "failed to read dma watchdog status\n");
+	ctrl = adapter->hw_read_wx(adapter,
+			NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
 
 	if (netxen_get_dma_watchdog_enabled(ctrl))
 		return 1;
@@ -1583,8 +1532,7 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 	/* send the wakeup request */
 	netxen_set_dma_watchdog_enable_req(ctrl);
 
-	netxen_crb_writelit_adapter(adapter,
-		NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
+	NXWR32(adapter, NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 9234473bc08..4754f5cffad 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -41,8 +41,7 @@ netxen_api_lock(struct netxen_adapter *adapter)
 
 	for (;;) {
 		/* Acquire PCIE HW semaphore5 */
-		netxen_nic_read_w0(adapter,
-			NETXEN_PCIE_REG(PCIE_SEM5_LOCK), &done);
+		done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM5_LOCK));
 
 		if (done == 1)
 			break;
@@ -56,7 +55,7 @@ netxen_api_lock(struct netxen_adapter *adapter)
 	}
 
 #if 0
-	netxen_nic_write_w1(adapter,
+	NXWR32(adapter,
 		NETXEN_API_LOCK_ID, NX_OS_API_LOCK_DRIVER);
 #endif
 	return 0;
@@ -65,11 +64,8 @@ netxen_api_lock(struct netxen_adapter *adapter)
 static int
 netxen_api_unlock(struct netxen_adapter *adapter)
 {
-	u32 val;
-
 	/* Release PCIE HW semaphore5 */
-	netxen_nic_read_w0(adapter,
-		NETXEN_PCIE_REG(PCIE_SEM5_UNLOCK), &val);
+	NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM5_UNLOCK));
 	return 0;
 }
 
@@ -86,7 +82,7 @@ netxen_poll_rsp(struct netxen_adapter *adapter)
 		if (++timeout > NX_OS_CRB_RETRY_COUNT)
 			return NX_CDRP_RSP_TIMEOUT;
 
-		netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET, &rsp);
+		rsp = NXRD32(adapter, NX_CDRP_CRB_OFFSET);
 	} while (!NX_CDRP_IS_RSP(rsp));
 
 	return rsp;
@@ -106,16 +102,15 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
 	if (netxen_api_lock(adapter))
 		return NX_RCODE_TIMEOUT;
 
-	netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET, signature);
+	NXWR32(adapter, NX_SIGN_CRB_OFFSET, signature);
 
-	netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET, arg1);
+	NXWR32(adapter, NX_ARG1_CRB_OFFSET, arg1);
 
-	netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET, arg2);
+	NXWR32(adapter, NX_ARG2_CRB_OFFSET, arg2);
 
-	netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET, arg3);
+	NXWR32(adapter, NX_ARG3_CRB_OFFSET, arg3);
 
-	netxen_nic_write_w1(adapter, NX_CDRP_CRB_OFFSET,
-			NX_CDRP_FORM_CMD(cmd));
+	NXWR32(adapter, NX_CDRP_CRB_OFFSET, NX_CDRP_FORM_CMD(cmd));
 
 	rsp = netxen_poll_rsp(adapter);
 
@@ -125,7 +120,7 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
 
 		rcode = NX_RCODE_TIMEOUT;
 	} else if (rsp == NX_CDRP_RSP_FAIL) {
-		netxen_nic_read_w1(adapter, NX_ARG1_CRB_OFFSET, &rcode);
+		rcode = NXRD32(adapter, NX_ARG1_CRB_OFFSET);
 
 		printk(KERN_ERR "%s: failed card response code:0x%x\n",
 				netxen_nic_driver_name, rcode);
@@ -328,6 +323,8 @@ nx_fw_cmd_create_tx_ctx(struct netxen_adapter *adapter)
 	int	err = 0;
 	u64	offset, phys_addr;
 	dma_addr_t	rq_phys_addr, rsp_phys_addr;
+	struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
+	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
 
 	rq_size = SIZEOF_HOSTRQ_TX(nx_hostrq_tx_ctx_t);
 	rq_addr = pci_alloc_consistent(adapter->pdev,
@@ -362,15 +359,13 @@ nx_fw_cmd_create_tx_ctx(struct netxen_adapter *adapter)
 
 	prq->dummy_dma_addr = cpu_to_le64(adapter->dummy_dma.phys_addr);
 
-	offset = adapter->ctx_desc_phys_addr+sizeof(struct netxen_ring_ctx);
+	offset = recv_ctx->phys_addr + sizeof(struct netxen_ring_ctx);
 	prq->cmd_cons_dma_addr = cpu_to_le64(offset);
 
 	prq_cds = &prq->cds_ring;
 
-	prq_cds->host_phys_addr =
-		cpu_to_le64(adapter->ahw.cmd_desc_phys_addr);
-
-	prq_cds->ring_size = cpu_to_le32(adapter->num_txd);
+	prq_cds->host_phys_addr = cpu_to_le64(tx_ring->phys_addr);
+	prq_cds->ring_size = cpu_to_le32(tx_ring->num_desc);
 
 	phys_addr = rq_phys_addr;
 	err = netxen_issue_cmd(adapter,
@@ -383,8 +378,7 @@ nx_fw_cmd_create_tx_ctx(struct netxen_adapter *adapter)
 
 	if (err == NX_RCODE_SUCCESS) {
 		temp = le32_to_cpu(prsp->cds_ring.host_producer_crb);
-		adapter->crb_addr_cmd_producer =
-			NETXEN_NIC_REG(temp - 0x200);
+		tx_ring->crb_cmd_producer = NETXEN_NIC_REG(temp - 0x200);
 #if 0
 		adapter->tx_state =
 			le32_to_cpu(prsp->host_ctx_state);
@@ -448,7 +442,19 @@ static struct netxen_recv_crb recv_crb_registers[] = {
 			NETXEN_NIC_REG(0x120)
 		},
 		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x138),
+		{
+			NETXEN_NIC_REG(0x138),
+			NETXEN_NIC_REG_2(0x000),
+			NETXEN_NIC_REG_2(0x004),
+			NETXEN_NIC_REG_2(0x008),
+		},
+		/* sw_int_mask */
+		{
+			CRB_SW_INT_MASK_0,
+			NETXEN_NIC_REG_2(0x044),
+			NETXEN_NIC_REG_2(0x048),
+			NETXEN_NIC_REG_2(0x04c),
+		},
 	},
 	/* Instance 1 */
 	{
@@ -461,7 +467,19 @@ static struct netxen_recv_crb recv_crb_registers[] = {
 			NETXEN_NIC_REG(0x164)
 		},
 		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x17c),
+		{
+			NETXEN_NIC_REG(0x17c),
+			NETXEN_NIC_REG_2(0x020),
+			NETXEN_NIC_REG_2(0x024),
+			NETXEN_NIC_REG_2(0x028),
+		},
+		/* sw_int_mask */
+		{
+			CRB_SW_INT_MASK_1,
+			NETXEN_NIC_REG_2(0x064),
+			NETXEN_NIC_REG_2(0x068),
+			NETXEN_NIC_REG_2(0x06c),
+		},
 	},
 	/* Instance 2 */
 	{
@@ -474,7 +492,19 @@ static struct netxen_recv_crb recv_crb_registers[] = {
 			NETXEN_NIC_REG(0x208)
 		},
 		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x220),
+		{
+			NETXEN_NIC_REG(0x220),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+		},
+		/* sw_int_mask */
+		{
+			CRB_SW_INT_MASK_2,
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+		},
 	},
 	/* Instance 3 */
 	{
@@ -487,7 +517,19 @@ static struct netxen_recv_crb recv_crb_registers[] = {
 			NETXEN_NIC_REG(0x24c)
 		},
 		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x264),
+		{
+			NETXEN_NIC_REG(0x264),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+		},
+		/* sw_int_mask */
+		{
+			CRB_SW_INT_MASK_3,
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+			NETXEN_NIC_REG_2(0x03c),
+		},
 	},
 };
 
@@ -497,84 +539,91 @@ netxen_init_old_ctx(struct netxen_adapter *adapter)
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_sds_ring *sds_ring;
+	struct nx_host_tx_ring *tx_ring;
 	int ring;
-	int func_id = adapter->portnum;
-
-	adapter->ctx_desc->cmd_ring_addr =
-		cpu_to_le64(adapter->ahw.cmd_desc_phys_addr);
-	adapter->ctx_desc->cmd_ring_size =
-		cpu_to_le32(adapter->num_txd);
+	int port = adapter->portnum;
+	struct netxen_ring_ctx *hwctx;
+	u32 signature;
 
+	tx_ring = adapter->tx_ring;
 	recv_ctx = &adapter->recv_ctx;
+	hwctx = recv_ctx->hwctx;
+
+	hwctx->cmd_ring_addr = cpu_to_le64(tx_ring->phys_addr);
+	hwctx->cmd_ring_size = cpu_to_le32(tx_ring->num_desc);
+
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
 
-		adapter->ctx_desc->rcv_ctx[ring].rcv_ring_addr =
+		hwctx->rcv_rings[ring].addr =
 			cpu_to_le64(rds_ring->phys_addr);
-		adapter->ctx_desc->rcv_ctx[ring].rcv_ring_size =
+		hwctx->rcv_rings[ring].size =
 			cpu_to_le32(rds_ring->num_desc);
 	}
-	sds_ring = &recv_ctx->sds_rings[0];
-	adapter->ctx_desc->sts_ring_addr = cpu_to_le64(sds_ring->phys_addr);
-	adapter->ctx_desc->sts_ring_size = cpu_to_le32(sds_ring->num_desc);
-
-	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_LO(func_id),
-			lower32(adapter->ctx_desc_phys_addr));
-	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_HI(func_id),
-			upper32(adapter->ctx_desc_phys_addr));
-	adapter->pci_write_normalize(adapter, CRB_CTX_SIGNATURE_REG(func_id),
-			NETXEN_CTX_SIGNATURE | func_id);
+
+	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
+		sds_ring = &recv_ctx->sds_rings[ring];
+
+		if (ring == 0) {
+			hwctx->sts_ring_addr = cpu_to_le64(sds_ring->phys_addr);
+			hwctx->sts_ring_size = cpu_to_le32(sds_ring->num_desc);
+		}
+		hwctx->sts_rings[ring].addr = cpu_to_le64(sds_ring->phys_addr);
+		hwctx->sts_rings[ring].size = cpu_to_le32(sds_ring->num_desc);
+		hwctx->sts_rings[ring].msi_index = cpu_to_le16(ring);
+	}
+	hwctx->sts_ring_count = cpu_to_le32(adapter->max_sds_rings);
+
+	signature = (adapter->max_sds_rings > 1) ?
+		NETXEN_CTX_SIGNATURE_V2 : NETXEN_CTX_SIGNATURE;
+
+	NXWR32(adapter, CRB_CTX_ADDR_REG_LO(port),
+			lower32(recv_ctx->phys_addr));
+	NXWR32(adapter, CRB_CTX_ADDR_REG_HI(port),
+			upper32(recv_ctx->phys_addr));
+	NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port),
+			signature | port);
 	return 0;
 }
 
-static uint32_t sw_int_mask[4] = {
-	CRB_SW_INT_MASK_0, CRB_SW_INT_MASK_1,
-	CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
-};
-
 int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 {
-	struct netxen_hardware_context *hw = &adapter->ahw;
-	u32 state = 0;
 	void *addr;
 	int err = 0;
 	int ring;
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_sds_ring *sds_ring;
+	struct nx_host_tx_ring *tx_ring;
 
 	struct pci_dev *pdev = adapter->pdev;
 	struct net_device *netdev = adapter->netdev;
+	int port = adapter->portnum;
 
-	err = netxen_receive_peg_ready(adapter);
-	if (err) {
-		printk(KERN_ERR "Rcv Peg initialization not complete:%x.\n",
-				state);
-		return err;
-	}
+	recv_ctx = &adapter->recv_ctx;
+	tx_ring = adapter->tx_ring;
 
 	addr = pci_alloc_consistent(pdev,
 			sizeof(struct netxen_ring_ctx) + sizeof(uint32_t),
-			&adapter->ctx_desc_phys_addr);
-
+			&recv_ctx->phys_addr);
 	if (addr == NULL) {
 		dev_err(&pdev->dev, "failed to allocate hw context\n");
 		return -ENOMEM;
 	}
+
 	memset(addr, 0, sizeof(struct netxen_ring_ctx));
-	adapter->ctx_desc = (struct netxen_ring_ctx *)addr;
-	adapter->ctx_desc->ctx_id = cpu_to_le32(adapter->portnum);
-	adapter->ctx_desc->cmd_consumer_offset =
-		cpu_to_le64(adapter->ctx_desc_phys_addr +
+	recv_ctx->hwctx = (struct netxen_ring_ctx *)addr;
+	recv_ctx->hwctx->ctx_id = cpu_to_le32(port);
+	recv_ctx->hwctx->cmd_consumer_offset =
+		cpu_to_le64(recv_ctx->phys_addr +
 			sizeof(struct netxen_ring_ctx));
-	adapter->cmd_consumer =
+	tx_ring->hw_consumer =
 		(__le32 *)(((char *)addr) + sizeof(struct netxen_ring_ctx));
 
 	/* cmd desc ring */
-	addr = pci_alloc_consistent(pdev,
-			TX_DESC_RINGSIZE(adapter),
-			&hw->cmd_desc_phys_addr);
+	addr = pci_alloc_consistent(pdev, TX_DESC_RINGSIZE(tx_ring),
+			&tx_ring->phys_addr);
 
 	if (addr == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate tx desc ring\n",
@@ -582,9 +631,7 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 		return -ENOMEM;
 	}
 
-	hw->cmd_desc_head = (struct cmd_desc_type0 *)addr;
-
-	recv_ctx = &adapter->recv_ctx;
+	tx_ring->desc_head = (struct cmd_desc_type0 *)addr;
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
@@ -602,8 +649,7 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 
 		if (adapter->fw_major < 4)
 			rds_ring->crb_rcv_producer =
-				recv_crb_registers[adapter->portnum].
-				crb_rcv_producer[ring];
+				recv_crb_registers[port].crb_rcv_producer[ring];
 	}
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
@@ -620,13 +666,16 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 			goto err_out_free;
 		}
 		sds_ring->desc_head = (struct status_desc *)addr;
+
+		sds_ring->crb_sts_consumer =
+			recv_crb_registers[port].crb_sts_consumer[ring];
+
+		sds_ring->crb_intr_mask =
+			recv_crb_registers[port].sw_int_mask[ring];
 	}
 
 
 	if (adapter->fw_major >= 4) {
-		adapter->intr_scheme = INTR_SCHEME_PERPORT;
-		adapter->msi_mode = MSI_MODE_MULTIFUNC;
-
 		err = nx_fw_cmd_create_rx_ctx(adapter);
 		if (err)
 			goto err_out_free;
@@ -634,23 +683,11 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 		if (err)
 			goto err_out_free;
 	} else {
-		sds_ring = &recv_ctx->sds_rings[0];
-		sds_ring->crb_sts_consumer =
-			recv_crb_registers[adapter->portnum].crb_sts_consumer;
-
-		adapter->intr_scheme = adapter->pci_read_normalize(adapter,
-				CRB_NIC_CAPABILITIES_FW);
-		adapter->msi_mode = adapter->pci_read_normalize(adapter,
-				CRB_NIC_MSI_MODE_FW);
-		recv_ctx->sds_rings[0].crb_intr_mask =
-				sw_int_mask[adapter->portnum];
-
 		err = netxen_init_old_ctx(adapter);
 		if (err) {
 			netxen_free_hw_resources(adapter);
 			return err;
 		}
-
 	}
 
 	return 0;
@@ -665,32 +702,40 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter)
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_sds_ring *sds_ring;
+	struct nx_host_tx_ring *tx_ring;
 	int ring;
 
+	int port = adapter->portnum;
+
 	if (adapter->fw_major >= 4) {
 		nx_fw_cmd_destroy_tx_ctx(adapter);
 		nx_fw_cmd_destroy_rx_ctx(adapter);
+	} else {
+		netxen_api_lock(adapter);
+		NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port),
+				NETXEN_CTX_RESET | port);
+		netxen_api_unlock(adapter);
 	}
 
-	if (adapter->ctx_desc != NULL) {
+	recv_ctx = &adapter->recv_ctx;
+
+	if (recv_ctx->hwctx != NULL) {
 		pci_free_consistent(adapter->pdev,
 				sizeof(struct netxen_ring_ctx) +
 				sizeof(uint32_t),
-				adapter->ctx_desc,
-				adapter->ctx_desc_phys_addr);
-		adapter->ctx_desc = NULL;
+				recv_ctx->hwctx,
+				recv_ctx->phys_addr);
+		recv_ctx->hwctx = NULL;
 	}
 
-	if (adapter->ahw.cmd_desc_head != NULL) {
+	tx_ring = adapter->tx_ring;
+	if (tx_ring->desc_head != NULL) {
 		pci_free_consistent(adapter->pdev,
-				sizeof(struct cmd_desc_type0) *
-				adapter->num_txd,
-				adapter->ahw.cmd_desc_head,
-				adapter->ahw.cmd_desc_phys_addr);
-		adapter->ahw.cmd_desc_head = NULL;
+				TX_DESC_RINGSIZE(tx_ring),
+				tx_ring->desc_head, tx_ring->phys_addr);
+		tx_ring->desc_head = NULL;
 	}
 
-	recv_ctx = &adapter->recv_ctx;
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
 
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index a677ff89518..e16ea46c24b 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -30,7 +30,6 @@
 
 #include <linux/types.h>
 #include <linux/delay.h>
-#include <asm/uaccess.h>
 #include <linux/pci.h>
 #include <asm/io.h>
 #include <linux/netdevice.h>
@@ -53,13 +52,9 @@ struct netxen_nic_stats {
 #define NETXEN_NIC_INVALID_DATA 0xDEADBEEF
 
 static const struct netxen_nic_stats netxen_nic_gstrings_stats[] = {
-	{"rcvd_bad_skb", NETXEN_NIC_STAT(stats.rcvdbadskb)},
 	{"xmit_called", NETXEN_NIC_STAT(stats.xmitcalled)},
-	{"xmited_frames", NETXEN_NIC_STAT(stats.xmitedframes)},
 	{"xmit_finished", NETXEN_NIC_STAT(stats.xmitfinished)},
-	{"bad_skb_len", NETXEN_NIC_STAT(stats.badskblen)},
-	{"no_cmd_desc", NETXEN_NIC_STAT(stats.nocmddescriptor)},
-	{"polled", NETXEN_NIC_STAT(stats.polled)},
+	{"rx_dropped", NETXEN_NIC_STAT(stats.rxdropped)},
 	{"tx_dropped", NETXEN_NIC_STAT(stats.txdropped)},
 	{"csummed", NETXEN_NIC_STAT(stats.csummed)},
 	{"no_rcv", NETXEN_NIC_STAT(stats.no_rcv)},
@@ -97,12 +92,9 @@ netxen_nic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
 	strncpy(drvinfo->driver, netxen_nic_driver_name, 32);
 	strncpy(drvinfo->version, NETXEN_NIC_LINUX_VERSIONID, 32);
 	write_lock_irqsave(&adapter->adapter_lock, flags);
-	fw_major = adapter->pci_read_normalize(adapter,
-					NETXEN_FW_VERSION_MAJOR);
-	fw_minor = adapter->pci_read_normalize(adapter,
-					NETXEN_FW_VERSION_MINOR);
-	fw_build = adapter->pci_read_normalize(adapter,
-					NETXEN_FW_VERSION_SUB);
+	fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+	fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+	fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
 	write_unlock_irqrestore(&adapter->adapter_lock, flags);
 	sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);
 
@@ -115,6 +107,7 @@ static int
 netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
+	int check_sfp_module = 0;
 
 	/* read which mode */
 	if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
@@ -139,7 +132,7 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	} else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
 		u32 val;
 
-		adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4);
+		val = NXRD32(adapter, NETXEN_PORT_MODE_ADDR);
 		if (val == NETXEN_PORT_MODE_802_3_AP) {
 			ecmd->supported = SUPPORTED_1000baseT_Full;
 			ecmd->advertising = ADVERTISED_1000baseT_Full;
@@ -148,13 +141,19 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 			ecmd->advertising = ADVERTISED_10000baseT_Full;
 		}
 
+		if (netif_running(dev) && adapter->has_link_events) {
+			ecmd->speed = adapter->link_speed;
+			ecmd->autoneg = adapter->link_autoneg;
+			ecmd->duplex = adapter->link_duplex;
+			goto skip;
+		}
+
 		ecmd->port = PORT_TP;
 
 		if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 			u16 pcifn = adapter->ahw.pci_func;
 
-			adapter->hw_read_wx(adapter,
-				P3_LINK_SPEED_REG(pcifn), &val, 4);
+			val = NXRD32(adapter, P3_LINK_SPEED_REG(pcifn));
 			ecmd->speed = P3_LINK_SPEED_MHZ *
 					P3_LINK_SPEED_VAL(pcifn, val);
 		} else
@@ -165,10 +164,11 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	} else
 		return -EIO;
 
+skip:
 	ecmd->phy_address = adapter->physical_port;
 	ecmd->transceiver = XCVR_EXTERNAL;
 
-	switch ((netxen_brdtype_t)adapter->ahw.board_type) {
+	switch (adapter->ahw.board_type) {
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 	case NETXEN_BRDTYPE_P2_SB31_2G:
 	case NETXEN_BRDTYPE_P3_REF_QG:
@@ -195,7 +195,7 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	case NETXEN_BRDTYPE_P3_HMEZ:
 		ecmd->supported |= SUPPORTED_MII;
 		ecmd->advertising |= ADVERTISED_MII;
-		ecmd->port = PORT_FIBRE;
+		ecmd->port = PORT_MII;
 		ecmd->autoneg = AUTONEG_DISABLE;
 		break;
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
@@ -203,6 +203,8 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 		ecmd->advertising |= ADVERTISED_TP;
 		ecmd->supported |= SUPPORTED_TP;
+		check_sfp_module = netif_running(dev) &&
+			adapter->has_link_events;
 	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 		ecmd->supported |= SUPPORTED_FIBRE;
@@ -217,6 +219,8 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 			ecmd->advertising |=
 				(ADVERTISED_FIBRE | ADVERTISED_TP);
 			ecmd->port = PORT_FIBRE;
+			check_sfp_module = netif_running(dev) &&
+				adapter->has_link_events;
 		} else {
 			ecmd->autoneg = AUTONEG_ENABLE;
 			ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
@@ -227,10 +231,28 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		break;
 	default:
 		printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
-		       (netxen_brdtype_t)adapter->ahw.board_type);
+				adapter->ahw.board_type);
 		return -EIO;
 	}
 
+	if (check_sfp_module) {
+		switch (adapter->module_type) {
+		case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
+		case LINKEVENT_MODULE_OPTICAL_SRLR:
+		case LINKEVENT_MODULE_OPTICAL_LRM:
+		case LINKEVENT_MODULE_OPTICAL_SFP_1G:
+			ecmd->port = PORT_FIBRE;
+			break;
+		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
+		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
+		case LINKEVENT_MODULE_TWINAX:
+			ecmd->port = PORT_TP;
+			break;
+		default:
+			ecmd->port = -1;
+		}
+	}
+
 	return 0;
 }
 
@@ -398,12 +420,11 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 	regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) |
 	    (adapter->pdev)->device;
 	/* which mode */
-	adapter->hw_read_wx(adapter, NETXEN_NIU_MODE, &regs_buff[0], 4);
+	regs_buff[0] = NXRD32(adapter, NETXEN_NIU_MODE);
 	mode = regs_buff[0];
 
 	/* Common registers to all the modes */
-	adapter->hw_read_wx(adapter,
-			NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER, &regs_buff[2], 4);
+	regs_buff[2] = NXRD32(adapter, NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER);
 	/* GB/XGB Mode */
 	mode = (mode / 2) - 1;
 	window = 0;
@@ -414,9 +435,8 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 				window = adapter->physical_port *
 					NETXEN_NIC_PORT_WINDOW;
 
-			adapter->hw_read_wx(adapter,
-				niu_registers[mode].reg[i - 3] + window,
-				&regs_buff[i], 4);
+			regs_buff[i] = NXRD32(adapter,
+				niu_registers[mode].reg[i - 3] + window);
 		}
 
 	}
@@ -440,7 +460,7 @@ static u32 netxen_nic_test_link(struct net_device *dev)
 			return !val;
 		}
 	} else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
+		val = NXRD32(adapter, CRB_XG_STATE);
 		return (val == XG_LINK_UP) ? 0 : 1;
 	}
 	return -EIO;
@@ -504,10 +524,9 @@ netxen_nic_get_pauseparam(struct net_device *dev,
 		if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
 			return;
 		/* get flow control settings */
-		netxen_nic_read_w0(adapter,NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				&val);
+		val = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port));
 		pause->rx_pause = netxen_gb_get_rx_flowctl(val);
-		netxen_nic_read_w0(adapter, NETXEN_NIU_GB_PAUSE_CTL, &val);
+		val = NXRD32(adapter, NETXEN_NIU_GB_PAUSE_CTL);
 		switch (port) {
 			case 0:
 				pause->tx_pause = !(netxen_gb_get_gb0_mask(val));
@@ -527,7 +546,7 @@ netxen_nic_get_pauseparam(struct net_device *dev,
 		if ((port < 0) || (port > NETXEN_NIU_MAX_XG_PORTS))
 			return;
 		pause->rx_pause = 1;
-		netxen_nic_read_w0(adapter, NETXEN_NIU_XG_PAUSE_CTL, &val);
+		val = NXRD32(adapter, NETXEN_NIU_XG_PAUSE_CTL);
 		if (port == 0)
 			pause->tx_pause = !(netxen_xg_get_xg0_mask(val));
 		else
@@ -550,18 +569,17 @@ netxen_nic_set_pauseparam(struct net_device *dev,
 		if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
 			return -EIO;
 		/* set flow control */
-		netxen_nic_read_w0(adapter,
-					NETXEN_NIU_GB_MAC_CONFIG_0(port), &val);
+		val = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port));
 
 		if (pause->rx_pause)
 			netxen_gb_rx_flowctl(val);
 		else
 			netxen_gb_unset_rx_flowctl(val);
 
-		netxen_nic_write_w0(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+		NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
 				val);
 		/* set autoneg */
-		netxen_nic_read_w0(adapter, NETXEN_NIU_GB_PAUSE_CTL, &val);
+		val = NXRD32(adapter, NETXEN_NIU_GB_PAUSE_CTL);
 		switch (port) {
 			case 0:
 				if (pause->tx_pause)
@@ -589,11 +607,11 @@ netxen_nic_set_pauseparam(struct net_device *dev,
 					netxen_gb_set_gb3_mask(val);
 				break;
 		}
-		netxen_nic_write_w0(adapter, NETXEN_NIU_GB_PAUSE_CTL, val);
+		NXWR32(adapter, NETXEN_NIU_GB_PAUSE_CTL, val);
 	} else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
 		if ((port < 0) || (port > NETXEN_NIU_MAX_XG_PORTS))
 			return -EIO;
-		netxen_nic_read_w0(adapter, NETXEN_NIU_XG_PAUSE_CTL, &val);
+		val = NXRD32(adapter, NETXEN_NIU_XG_PAUSE_CTL);
 		if (port == 0) {
 			if (pause->tx_pause)
 				netxen_xg_unset_xg0_mask(val);
@@ -605,7 +623,7 @@ netxen_nic_set_pauseparam(struct net_device *dev,
 			else
 				netxen_xg_set_xg1_mask(val);
 		}
-		netxen_nic_write_w0(adapter, NETXEN_NIU_XG_PAUSE_CTL, val);
+		NXWR32(adapter, NETXEN_NIU_XG_PAUSE_CTL, val);
 	} else {
 		printk(KERN_ERR "%s: Unknown board type: %x\n",
 				netxen_nic_driver_name,
@@ -619,14 +637,14 @@ static int netxen_nic_reg_test(struct net_device *dev)
 	struct netxen_adapter *adapter = netdev_priv(dev);
 	u32 data_read, data_written;
 
-	netxen_nic_read_w0(adapter, NETXEN_PCIX_PH_REG(0), &data_read);
+	data_read = NXRD32(adapter, NETXEN_PCIX_PH_REG(0));
 	if ((data_read & 0xffff) != PHAN_VENDOR_ID)
 	return 1;
 
 	data_written = (u32)0xa5a5a5a5;
 
-	netxen_nic_reg_write(adapter, CRB_SCRATCHPAD_TEST, data_written);
-	data_read = adapter->pci_read_normalize(adapter, CRB_SCRATCHPAD_TEST);
+	NXWR32(adapter, CRB_SCRATCHPAD_TEST, data_written);
+	data_read = NXRD32(adapter, CRB_SCRATCHPAD_TEST);
 	if (data_written != data_read)
 		return 1;
 
@@ -743,11 +761,11 @@ netxen_nic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		return;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG_NV);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG_NV);
 	if (wol_cfg & (1UL << adapter->portnum))
 		wol->supported |= WAKE_MAGIC;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG);
 	if (wol_cfg & (1UL << adapter->portnum))
 		wol->wolopts |= WAKE_MAGIC;
 }
@@ -764,16 +782,16 @@ netxen_nic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & ~WAKE_MAGIC)
 		return -EOPNOTSUPP;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG_NV);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG_NV);
 	if (!(wol_cfg & (1 << adapter->portnum)))
 		return -EOPNOTSUPP;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG);
 	if (wol->wolopts & WAKE_MAGIC)
 		wol_cfg |= 1UL << adapter->portnum;
 	else
 		wol_cfg &= ~(1UL << adapter->portnum);
-	netxen_nic_reg_write(adapter, NETXEN_WOL_CONFIG, wol_cfg);
+	NXWR32(adapter, NETXEN_WOL_CONFIG, wol_cfg);
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 016c62129c7..7f0ddbfa7b2 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -31,16 +31,8 @@
 #ifndef __NETXEN_NIC_HDR_H_
 #define __NETXEN_NIC_HDR_H_
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
 #include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/string.h>		/* for memset */
 
 /*
  * The basic unit of access when reading/writing control registers.
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 5026811c04c..42ffb825ebf 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -32,7 +32,6 @@
 #include "netxen_nic_hw.h"
 #include "netxen_nic_phan_reg.h"
 
-#include <linux/firmware.h>
 #include <net/ip.h>
 
 #define MASK(n) ((1ULL<<(n))-1)
@@ -48,8 +47,49 @@
 #define CRB_HI(off)	((crb_hub_agt[CRB_BLK(off)] << 20) | ((off) & 0xf0000))
 #define CRB_INDIRECT_2M	(0x1e0000UL)
 
+#ifndef readq
+static inline u64 readq(void __iomem *addr)
+{
+	return readl(addr) | (((u64) readl(addr + 4)) << 32LL);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(u64 val, void __iomem *addr)
+{
+	writel(((u32) (val)), (addr));
+	writel(((u32) (val >> 32)), (addr + 4));
+}
+#endif
+
+#define ADDR_IN_RANGE(addr, low, high)	\
+	(((addr) < (high)) && ((addr) >= (low)))
+
+#define PCI_OFFSET_FIRST_RANGE(adapter, off)    \
+	((adapter)->ahw.pci_base0 + (off))
+#define PCI_OFFSET_SECOND_RANGE(adapter, off)   \
+	((adapter)->ahw.pci_base1 + (off) - SECOND_PAGE_GROUP_START)
+#define PCI_OFFSET_THIRD_RANGE(adapter, off)    \
+	((adapter)->ahw.pci_base2 + (off) - THIRD_PAGE_GROUP_START)
+
+static void __iomem *pci_base_offset(struct netxen_adapter *adapter,
+					    unsigned long off)
+{
+	if (ADDR_IN_RANGE(off, FIRST_PAGE_GROUP_START, FIRST_PAGE_GROUP_END))
+		return PCI_OFFSET_FIRST_RANGE(adapter, off);
+
+	if (ADDR_IN_RANGE(off, SECOND_PAGE_GROUP_START, SECOND_PAGE_GROUP_END))
+		return PCI_OFFSET_SECOND_RANGE(adapter, off);
+
+	if (ADDR_IN_RANGE(off, THIRD_PAGE_GROUP_START, THIRD_PAGE_GROUP_END))
+		return PCI_OFFSET_THIRD_RANGE(adapter, off);
+
+	return NULL;
+}
+
 #define CRB_WIN_LOCK_TIMEOUT 100000000
-static crb_128M_2M_block_map_t crb_128M_2M_map[64] = {
+static crb_128M_2M_block_map_t
+crb_128M_2M_map[64] __cacheline_aligned_in_smp = {
     {{{0, 0,         0,         0} } },		/* 0: PCI */
     {{{1, 0x0100000, 0x0102000, 0x120000},	/* 1: PCIE */
 	  {1, 0x0110000, 0x0120000, 0x130000},
@@ -279,39 +319,8 @@ static unsigned crb_hub_agt[64] =
 
 /*  PCI Windowing for DDR regions.  */
 
-#define ADDR_IN_RANGE(addr, low, high)	\
-	(((addr) <= (high)) && ((addr) >= (low)))
-
 #define NETXEN_WINDOW_ONE 	0x2000000 /*CRB Window: bit 25 of CRB address */
 
-#define NETXEN_NIC_ZERO_PAUSE_ADDR     0ULL
-#define NETXEN_NIC_UNIT_PAUSE_ADDR     0x200ULL
-#define NETXEN_NIC_EPG_PAUSE_ADDR1     0x2200010000c28001ULL
-#define NETXEN_NIC_EPG_PAUSE_ADDR2     0x0100088866554433ULL
-
-#define NETXEN_NIC_WINDOW_MARGIN 0x100000
-
-int netxen_nic_set_mac(struct net_device *netdev, void *p)
-{
-	struct netxen_adapter *adapter = netdev_priv(netdev);
-	struct sockaddr *addr = p;
-
-	if (netif_running(netdev))
-		return -EBUSY;
-
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EADDRNOTAVAIL;
-
-	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-
-	/* For P3, MAC addr is not set in NIU */
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
-		if (adapter->macaddr_set)
-			adapter->macaddr_set(adapter, addr->sa_data);
-
-	return 0;
-}
-
 #define NETXEN_UNICAST_ADDR(port, index) \
 	(NETXEN_UNICAST_ADDR_BASE+(port*32)+(index*8))
 #define NETXEN_MCAST_ADDR(port, index) \
@@ -331,22 +340,20 @@ netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter)
 	if (adapter->mc_enabled)
 		return 0;
 
-	adapter->hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	val = NXRD32(adapter, NETXEN_MAC_ADDR_CNTL_REG);
 	val |= (1UL << (28+port));
-	adapter->hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	NXWR32(adapter, NETXEN_MAC_ADDR_CNTL_REG, val);
 
 	/* add broadcast addr to filter */
 	val = 0xffffff;
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_UNICAST_ADDR(port, 0)+4, val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 0)+4, val);
 
 	/* add station addr to filter */
 	val = MAC_HI(addr);
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1), val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 1), val);
 	val = MAC_LO(addr);
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_UNICAST_ADDR(port, 1)+4, val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 1)+4, val);
 
 	adapter->mc_enabled = 1;
 	return 0;
@@ -362,18 +369,17 @@ netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter)
 	if (!adapter->mc_enabled)
 		return 0;
 
-	adapter->hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	val = NXRD32(adapter, NETXEN_MAC_ADDR_CNTL_REG);
 	val &= ~(1UL << (28+port));
-	adapter->hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	NXWR32(adapter, NETXEN_MAC_ADDR_CNTL_REG, val);
 
 	val = MAC_HI(addr);
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
 	val = MAC_LO(addr);
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_UNICAST_ADDR(port, 0)+4, val);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 0)+4, val);
 
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1), 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1)+4, 0);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 1), 0);
+	NXWR32(adapter, NETXEN_UNICAST_ADDR(port, 1)+4, 0);
 
 	adapter->mc_enabled = 0;
 	return 0;
@@ -389,10 +395,8 @@ netxen_nic_set_mcast_addr(struct netxen_adapter *adapter,
 	lo = MAC_LO(addr);
 	hi = MAC_HI(addr);
 
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_MCAST_ADDR(port, index), hi);
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_MCAST_ADDR(port, index)+4, lo);
+	NXWR32(adapter, NETXEN_MCAST_ADDR(port, index), hi);
+	NXWR32(adapter, NETXEN_MCAST_ADDR(port, index)+4, lo);
 
 	return 0;
 }
@@ -445,100 +449,58 @@ void netxen_p2_nic_set_multi(struct net_device *netdev)
 		netxen_nic_set_mcast_addr(adapter, index, null_addr);
 }
 
-static int nx_p3_nic_add_mac(struct netxen_adapter *adapter,
-		u8 *addr, nx_mac_list_t **add_list, nx_mac_list_t **del_list)
-{
-	nx_mac_list_t *cur, *prev;
-
-	/* if in del_list, move it to adapter->mac_list */
-	for (cur = *del_list, prev = NULL; cur;) {
-		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
-			if (prev == NULL)
-				*del_list = cur->next;
-			else
-				prev->next = cur->next;
-			cur->next = adapter->mac_list;
-			adapter->mac_list = cur;
-			return 0;
-		}
-		prev = cur;
-		cur = cur->next;
-	}
-
-	/* make sure to add each mac address only once */
-	for (cur = adapter->mac_list; cur; cur = cur->next) {
-		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0)
-			return 0;
-	}
-	/* not in del_list, create new entry and add to add_list */
-	cur = kmalloc(sizeof(*cur), in_atomic()? GFP_ATOMIC : GFP_KERNEL);
-	if (cur == NULL) {
-		printk(KERN_ERR "%s: cannot allocate memory. MAC filtering may"
-				"not work properly from now.\n", __func__);
-		return -1;
-	}
-
-	memcpy(cur->mac_addr, addr, ETH_ALEN);
-	cur->next = *add_list;
-	*add_list = cur;
-	return 0;
-}
-
 static int
 netxen_send_cmd_descs(struct netxen_adapter *adapter,
-		struct cmd_desc_type0 *cmd_desc_arr, int nr_elements)
+		struct cmd_desc_type0 *cmd_desc_arr, int nr_desc)
 {
-	uint32_t i, producer;
+	u32 i, producer, consumer;
 	struct netxen_cmd_buffer *pbuf;
 	struct cmd_desc_type0 *cmd_desc;
-
-	if (nr_elements > MAX_PENDING_DESC_BLOCK_SIZE || nr_elements == 0) {
-		printk(KERN_WARNING "%s: Too many command descriptors in a "
-			      "request\n", __func__);
-		return -EINVAL;
-	}
+	struct nx_host_tx_ring *tx_ring;
 
 	i = 0;
 
+	tx_ring = adapter->tx_ring;
 	netif_tx_lock_bh(adapter->netdev);
 
-	producer = adapter->cmd_producer;
+	producer = tx_ring->producer;
+	consumer = tx_ring->sw_consumer;
+
+	if (nr_desc >= find_diff_among(producer, consumer, tx_ring->num_desc)) {
+		netif_tx_unlock_bh(adapter->netdev);
+		return -EBUSY;
+	}
+
 	do {
 		cmd_desc = &cmd_desc_arr[i];
 
-		pbuf = &adapter->cmd_buf_arr[producer];
+		pbuf = &tx_ring->cmd_buf_arr[producer];
 		pbuf->skb = NULL;
 		pbuf->frag_count = 0;
 
-		/* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */
-		memcpy(&adapter->ahw.cmd_desc_head[producer],
+		memcpy(&tx_ring->desc_head[producer],
 			&cmd_desc_arr[i], sizeof(struct cmd_desc_type0));
 
-		producer = get_next_index(producer,
-				adapter->num_txd);
+		producer = get_next_index(producer, tx_ring->num_desc);
 		i++;
 
-	} while (i != nr_elements);
-
-	adapter->cmd_producer = producer;
+	} while (i != nr_desc);
 
-	/* write producer index to start the xmit */
+	tx_ring->producer = producer;
 
-	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
+	netxen_nic_update_cmd_producer(adapter, tx_ring, producer);
 
 	netif_tx_unlock_bh(adapter->netdev);
 
 	return 0;
 }
 
-static int nx_p3_sre_macaddr_change(struct net_device *dev,
-		u8 *addr, unsigned op)
+static int
+nx_p3_sre_macaddr_change(struct netxen_adapter *adapter, u8 *addr, unsigned op)
 {
-	struct netxen_adapter *adapter = netdev_priv(dev);
 	nx_nic_req_t req;
 	nx_mac_req_t *mac_req;
 	u64 word;
-	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 	req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
@@ -550,28 +512,51 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev,
 	mac_req->op = op;
 	memcpy(mac_req->mac_addr, addr, 6);
 
-	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
-	if (rv != 0) {
-		printk(KERN_ERR "ERROR. Could not send mac update\n");
-		return rv;
+	return netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+}
+
+static int nx_p3_nic_add_mac(struct netxen_adapter *adapter,
+		u8 *addr, struct list_head *del_list)
+{
+	struct list_head *head;
+	nx_mac_list_t *cur;
+
+	/* look up if already exists */
+	list_for_each(head, del_list) {
+		cur = list_entry(head, nx_mac_list_t, list);
+
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
+			list_move_tail(head, &adapter->mac_list);
+			return 0;
+		}
 	}
 
-	return 0;
+	cur = kzalloc(sizeof(nx_mac_list_t), GFP_ATOMIC);
+	if (cur == NULL) {
+		printk(KERN_ERR "%s: failed to add mac address filter\n",
+				adapter->netdev->name);
+		return -ENOMEM;
+	}
+	memcpy(cur->mac_addr, addr, ETH_ALEN);
+	list_add_tail(&cur->list, &adapter->mac_list);
+	return nx_p3_sre_macaddr_change(adapter,
+				cur->mac_addr, NETXEN_MAC_ADD);
 }
 
 void netxen_p3_nic_set_multi(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
-	nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;
 	struct dev_mc_list *mc_ptr;
 	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	u32 mode = VPORT_MISS_MODE_DROP;
+	LIST_HEAD(del_list);
+	struct list_head *head;
+	nx_mac_list_t *cur;
 
-	del_list = adapter->mac_list;
-	adapter->mac_list = NULL;
+	list_splice_tail_init(&adapter->mac_list, &del_list);
 
-	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);
-	nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
+	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &del_list);
+	nx_p3_nic_add_mac(adapter, bcast_addr, &del_list);
 
 	if (netdev->flags & IFF_PROMISC) {
 		mode = VPORT_MISS_MODE_ACCEPT_ALL;
@@ -587,25 +572,20 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	if (netdev->mc_count > 0) {
 		for (mc_ptr = netdev->mc_list; mc_ptr;
 		     mc_ptr = mc_ptr->next) {
-			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,
-					  &add_list, &del_list);
+			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr, &del_list);
 		}
 	}
 
 send_fw_cmd:
 	adapter->set_promisc(adapter, mode);
-	for (cur = del_list; cur;) {
-		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);
-		next = cur->next;
+	head = &del_list;
+	while (!list_empty(head)) {
+		cur = list_entry(head->next, nx_mac_list_t, list);
+
+		nx_p3_sre_macaddr_change(adapter,
+				cur->mac_addr, NETXEN_MAC_DEL);
+		list_del(&cur->list);
 		kfree(cur);
-		cur = next;
-	}
-	for (cur = add_list; cur;) {
-		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_ADD);
-		next = cur->next;
-		cur->next = adapter->mac_list;
-		adapter->mac_list = cur;
-		cur = next;
 	}
 }
 
@@ -630,17 +610,25 @@ int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 
 void netxen_p3_free_mac_list(struct netxen_adapter *adapter)
 {
-	nx_mac_list_t *cur, *next;
-
-	cur = adapter->mac_list;
-
-	while (cur) {
-		next = cur->next;
+	nx_mac_list_t *cur;
+	struct list_head *head = &adapter->mac_list;
+
+	while (!list_empty(head)) {
+		cur = list_entry(head->next, nx_mac_list_t, list);
+		nx_p3_sre_macaddr_change(adapter,
+				cur->mac_addr, NETXEN_MAC_DEL);
+		list_del(&cur->list);
 		kfree(cur);
-		cur = next;
 	}
 }
 
+int netxen_p3_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
+{
+	/* assuming caller has already copied new addr to netdev */
+	netxen_p3_nic_set_multi(adapter->netdev);
+	return 0;
+}
+
 #define	NETXEN_CONFIG_INTR_COALESCE	3
 
 /*
@@ -717,6 +705,28 @@ int netxen_config_rss(struct netxen_adapter *adapter, int enable)
 	return rv;
 }
 
+int netxen_linkevent_request(struct netxen_adapter *adapter, int enable)
+{
+	nx_nic_req_t req;
+	u64 word;
+	int rv;
+
+	memset(&req, 0, sizeof(nx_nic_req_t));
+	req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+	word = NX_NIC_H2C_OPCODE_GET_LINKEVENT | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+	req.words[0] = cpu_to_le64(enable | (enable << 8));
+
+	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0) {
+		printk(KERN_ERR "%s: could not configure link notification\n",
+				adapter->netdev->name);
+	}
+
+	return rv;
+}
+
 /*
  * netxen_nic_change_mtu - Change the Maximum Transfer Unit
  * @returns 0 on success, negative on failure
@@ -812,8 +822,8 @@ int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
 	crbaddr = CRB_MAC_BLOCK_START +
 		(4 * ((pci_func/2) * 3)) + (4 * (pci_func & 1));
 
-	adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
-	adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
+	mac_lo = NXRD32(adapter, crbaddr);
+	mac_hi = NXRD32(adapter, crbaddr+4);
 
 	if (pci_func & 1)
 		*mac = le64_to_cpu((mac_lo >> 16) | ((u64)mac_hi << 16));
@@ -831,8 +841,7 @@ static int crb_win_lock(struct netxen_adapter *adapter)
 
 	while (!done) {
 		/* acquire semaphore3 from PCI HW block */
-		adapter->hw_read_wx(adapter,
-				NETXEN_PCIE_REG(PCIE_SEM7_LOCK), &done, 4);
+		done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM7_LOCK));
 		if (done == 1)
 			break;
 		if (timeout >= CRB_WIN_LOCK_TIMEOUT)
@@ -840,8 +849,7 @@ static int crb_win_lock(struct netxen_adapter *adapter)
 		timeout++;
 		udelay(1);
 	}
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_CRB_WIN_LOCK_ID, adapter->portnum);
+	NXWR32(adapter, NETXEN_CRB_WIN_LOCK_ID, adapter->portnum);
 	return 0;
 }
 
@@ -849,8 +857,7 @@ static void crb_win_unlock(struct netxen_adapter *adapter)
 {
 	int val;
 
-	adapter->hw_read_wx(adapter,
-			NETXEN_PCIE_REG(PCIE_SEM7_UNLOCK), &val, 4);
+	val = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM7_UNLOCK));
 }
 
 /*
@@ -907,17 +914,15 @@ netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter, u32 wndw)
  * In: 'off' is offset from base in 128M pci map
  */
 static int
-netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter,
-		ulong *off, int len)
+netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter, ulong *off)
 {
-	unsigned long end = *off + len;
 	crb_128M_2M_sub_block_map_t *m;
 
 
 	if (*off >= NETXEN_CRB_MAX)
 		return -1;
 
-	if (*off >= NETXEN_PCI_CAMQM && (end <= NETXEN_PCI_CAMQM_2M_END)) {
+	if (*off >= NETXEN_PCI_CAMQM && (*off < NETXEN_PCI_CAMQM_2M_END)) {
 		*off = (*off - NETXEN_PCI_CAMQM) + NETXEN_PCI_CAMQM_2M_BASE +
 			(ulong)adapter->ahw.pci_base0;
 		return 0;
@@ -927,14 +932,13 @@ netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter,
 		return -1;
 
 	*off -= NETXEN_PCI_CRBSPACE;
-	end = *off + len;
 
 	/*
 	 * Try direct map
 	 */
 	m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)];
 
-	if (m->valid && (m->start_128M <= *off) && (m->end_128M >= end)) {
+	if (m->valid && (m->start_128M <= *off) && (m->end_128M > *off)) {
 		*off = *off + m->start_2M - m->start_128M +
 			(ulong)adapter->ahw.pci_base0;
 		return 0;
@@ -972,214 +976,11 @@ netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong *off)
 		(ulong)adapter->ahw.pci_base0;
 }
 
-static int
-netxen_do_load_firmware(struct netxen_adapter *adapter, const char *fwname,
-		const struct firmware *fw)
-{
-	u64 *ptr64;
-	u32 i, flashaddr, size;
-	struct pci_dev *pdev = adapter->pdev;
-
-	if (fw)
-		dev_info(&pdev->dev, "loading firmware from file %s\n", fwname);
-	else
-		dev_info(&pdev->dev, "loading firmware from flash\n");
-
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_CAS_RST, 1);
-
-	if (fw) {
-		__le64 data;
-
-		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 8;
-
-		ptr64 = (u64 *)&fw->data[NETXEN_BOOTLD_START];
-		flashaddr = NETXEN_BOOTLD_START;
-
-		for (i = 0; i < size; i++) {
-			data = cpu_to_le64(ptr64[i]);
-			adapter->pci_mem_write(adapter, flashaddr, &data, 8);
-			flashaddr += 8;
-		}
-
-		size = *(u32 *)&fw->data[NX_FW_SIZE_OFFSET];
-		size = (__force u32)cpu_to_le32(size) / 8;
-
-		ptr64 = (u64 *)&fw->data[NETXEN_IMAGE_START];
-		flashaddr = NETXEN_IMAGE_START;
-
-		for (i = 0; i < size; i++) {
-			data = cpu_to_le64(ptr64[i]);
-
-			if (adapter->pci_mem_write(adapter,
-						flashaddr, &data, 8))
-				return -EIO;
-
-			flashaddr += 8;
-		}
-	} else {
-		u32 data;
-
-		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 4;
-		flashaddr = NETXEN_BOOTLD_START;
-
-		for (i = 0; i < size; i++) {
-			if (netxen_rom_fast_read(adapter,
-					flashaddr, (int *)&data) != 0)
-				return -EIO;
-
-			if (adapter->pci_mem_write(adapter,
-						flashaddr, &data, 4))
-				return -EIO;
-
-			flashaddr += 4;
-		}
-	}
-	msleep(1);
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
-	else {
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_CAS_RST, 0);
-	}
-
-	return 0;
-}
-
-static int
-netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname,
-		const struct firmware *fw)
-{
-	__le32 val;
-	u32 major, minor, build, ver, min_ver, bios;
-	struct pci_dev *pdev = adapter->pdev;
-
-	if (fw->size < NX_FW_MIN_SIZE)
-		return -EINVAL;
-
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
-	if ((__force u32)val != NETXEN_BDINFO_MAGIC)
-		return -EINVAL;
-
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
-	else
-		min_ver = NETXEN_VERSION_CODE(3, 4, 216);
-
-	ver = NETXEN_VERSION_CODE(major, minor, build);
-
-	if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
-		dev_err(&pdev->dev,
-				"%s: firmware version %d.%d.%d unsupported\n",
-				fwname, major, minor, build);
-		return -EINVAL;
-	}
-
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
-	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
-	if ((__force u32)val != bios) {
-		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
-				fwname);
-		return -EINVAL;
-	}
-
-	/* check if flashed firmware is newer */
-	if (netxen_rom_fast_read(adapter,
-			NX_FW_VERSION_OFFSET, (int *)&val))
-		return -EIO;
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
-	if (NETXEN_VERSION_CODE(major, minor, build) > ver)
-		return -EINVAL;
-
-	netxen_nic_reg_write(adapter, NETXEN_CAM_RAM(0x1fc),
-			NETXEN_BDINFO_MAGIC);
-	return 0;
-}
-
-static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
-
-int netxen_load_firmware(struct netxen_adapter *adapter)
-{
-	u32 capability, flashed_ver;
-	const struct firmware *fw;
-	int fw_type;
-	struct pci_dev *pdev = adapter->pdev;
-	int rc = 0;
-
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		fw_type = NX_P2_MN_ROMIMAGE;
-		goto request_fw;
-	} else {
-		fw_type = NX_P3_CT_ROMIMAGE;
-		goto request_fw;
-	}
-
-request_mn:
-	capability = 0;
-
-	netxen_rom_fast_read(adapter,
-			NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
-	if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
-		adapter->hw_read_wx(adapter,
-				NX_PEG_TUNE_CAPABILITY, &capability, 4);
-		if (capability & NX_PEG_TUNE_MN_PRESENT) {
-			fw_type = NX_P3_MN_ROMIMAGE;
-			goto request_fw;
-		}
-	}
-
-request_fw:
-	rc = request_firmware(&fw, fw_name[fw_type], &pdev->dev);
-	if (rc != 0) {
-		if (fw_type == NX_P3_CT_ROMIMAGE) {
-			msleep(1);
-			goto request_mn;
-		}
-
-		fw = NULL;
-		goto load_fw;
-	}
-
-	rc = netxen_validate_firmware(adapter, fw_name[fw_type], fw);
-	if (rc != 0) {
-		release_firmware(fw);
-
-		if (fw_type == NX_P3_CT_ROMIMAGE) {
-			msleep(1);
-			goto request_mn;
-		}
-
-		fw = NULL;
-	}
-
-load_fw:
-	rc = netxen_do_load_firmware(adapter, fw_name[fw_type], fw);
-
-	if (fw)
-		release_firmware(fw);
-	return rc;
-}
-
 int
-netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len)
+netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter, ulong off, u32 data)
 {
 	void __iomem *addr;
 
-	BUG_ON(len != 4);
-
 	if (ADDR_IN_WINDOW1(off)) {
 		addr = NETXEN_CRB_NORMALIZE(adapter, off);
 	} else {		/* Window 0 */
@@ -1192,7 +993,7 @@ netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
 		return 1;
 	}
 
-	writel(*(u32 *) data, addr);
+	writel(data, addr);
 
 	if (!ADDR_IN_WINDOW1(off))
 		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
@@ -1200,13 +1001,11 @@ netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
 	return 0;
 }
 
-int
-netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len)
+u32
+netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter, ulong off)
 {
 	void __iomem *addr;
-
-	BUG_ON(len != 4);
+	u32 data;
 
 	if (ADDR_IN_WINDOW1(off)) {	/* Window 1 */
 		addr = NETXEN_CRB_NORMALIZE(adapter, off);
@@ -1220,24 +1019,21 @@ netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter,
 		return 1;
 	}
 
-	*(u32 *)data = readl(addr);
+	data = readl(addr);
 
 	if (!ADDR_IN_WINDOW1(off))
 		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
 
-	return 0;
+	return data;
 }
 
 int
-netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len)
+netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter, ulong off, u32 data)
 {
 	unsigned long flags = 0;
 	int rv;
 
-	BUG_ON(len != 4);
-
-	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off, len);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
 
 	if (rv == -1) {
 		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
@@ -1250,26 +1046,24 @@ netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
 		write_lock_irqsave(&adapter->adapter_lock, flags);
 		crb_win_lock(adapter);
 		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
-		writel(*(uint32_t *)data, (void __iomem *)off);
+		writel(data, (void __iomem *)off);
 		crb_win_unlock(adapter);
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 	} else
-		writel(*(uint32_t *)data, (void __iomem *)off);
+		writel(data, (void __iomem *)off);
 
 
 	return 0;
 }
 
-int
-netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter,
-		ulong off, void *data, int len)
+u32
+netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter, ulong off)
 {
 	unsigned long flags = 0;
 	int rv;
+	u32 data;
 
-	BUG_ON(len != 4);
-
-	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off, len);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
 
 	if (rv == -1) {
 		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
@@ -1282,47 +1076,13 @@ netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter,
 		write_lock_irqsave(&adapter->adapter_lock, flags);
 		crb_win_lock(adapter);
 		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
-		*(uint32_t *)data = readl((void __iomem *)off);
+		data = readl((void __iomem *)off);
 		crb_win_unlock(adapter);
 		write_unlock_irqrestore(&adapter->adapter_lock, flags);
 	} else
-		*(uint32_t *)data = readl((void __iomem *)off);
-
-	return 0;
-}
+		data = readl((void __iomem *)off);
 
-void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val)
-{
-	adapter->hw_write_wx(adapter, off, &val, 4);
-}
-
-int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off)
-{
-	int val;
-	adapter->hw_read_wx(adapter, off, &val, 4);
-	return val;
-}
-
-/* Change the window to 0, write and change back to window 1. */
-void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value)
-{
-	adapter->hw_write_wx(adapter, index, &value, 4);
-}
-
-/* Change the window to 0, read and change back to window 1. */
-void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 *value)
-{
-	adapter->hw_read_wx(adapter, index, value, 4);
-}
-
-void netxen_nic_write_w1(struct netxen_adapter *adapter, u32 index, u32 value)
-{
-	adapter->hw_write_wx(adapter, index, &value, 4);
-}
-
-void netxen_nic_read_w1(struct netxen_adapter *adapter, u32 index, u32 *value)
-{
-	adapter->hw_read_wx(adapter, index, value, 4);
+	return data;
 }
 
 /*
@@ -1425,17 +1185,6 @@ u32 netxen_nic_pci_read_immediate_128M(struct netxen_adapter *adapter, u64 off)
 	return readl((void __iomem *)(pci_base_offset(adapter, off)));
 }
 
-void netxen_nic_pci_write_normalize_128M(struct netxen_adapter *adapter,
-		u64 off, u32 data)
-{
-	writel(data, NETXEN_CRB_NORMALIZE(adapter, off));
-}
-
-u32 netxen_nic_pci_read_normalize_128M(struct netxen_adapter *adapter, u64 off)
-{
-	return readl(NETXEN_CRB_NORMALIZE(adapter, off));
-}
-
 unsigned long
 netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 		unsigned long long addr)
@@ -1447,12 +1196,10 @@ netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 		/* DDR network side */
 		window = MN_WIN(addr);
 		adapter->ahw.ddr_mn_window = window;
-		adapter->hw_write_wx(adapter,
-				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
-				&window, 4);
-		adapter->hw_read_wx(adapter,
-				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
-				&win_read, 4);
+		NXWR32(adapter, adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
+				window);
+		win_read = NXRD32(adapter,
+				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE);
 		if ((win_read << 17) != window) {
 			printk(KERN_INFO "Written MNwin (0x%x) != "
 				"Read MNwin (0x%x)\n", window, win_read);
@@ -1467,12 +1214,10 @@ netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 
 		window = OCM_WIN(addr);
 		adapter->ahw.ddr_mn_window = window;
-		adapter->hw_write_wx(adapter,
-				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
-				&window, 4);
-		adapter->hw_read_wx(adapter,
-				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
-				&win_read, 4);
+		NXWR32(adapter, adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
+				window);
+		win_read = NXRD32(adapter,
+				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE);
 		if ((win_read >> 7) != window) {
 			printk(KERN_INFO "%s: Written OCMwin (0x%x) != "
 					"Read OCMwin (0x%x)\n",
@@ -1485,12 +1230,10 @@ netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 		/* QDR network side */
 		window = MS_WIN(addr);
 		adapter->ahw.qdr_sn_window = window;
-		adapter->hw_write_wx(adapter,
-				adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
-				&window, 4);
-		adapter->hw_read_wx(adapter,
-				adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
-				&win_read, 4);
+		NXWR32(adapter, adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
+				window);
+		win_read = NXRD32(adapter,
+				adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE);
 		if (win_read != window) {
 			printk(KERN_INFO "%s: Written MSwin (0x%x) != "
 					"Read MSwin (0x%x)\n",
@@ -1936,27 +1679,20 @@ netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
 
 	for (i = 0; i < loop; i++) {
 		temp = off8 + (i << 3);
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_ADDR_LO, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_ADDR_LO, temp);
 		temp = 0;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_ADDR_HI, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_ADDR_HI, temp);
 		temp = word[i] & 0xffffffff;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_WRDATA_LO, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp);
 		temp = (word[i] >> 32) & 0xffffffff;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_WRDATA_HI, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp);
 		temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_CTRL, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_CTRL, temp);
 		temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE;
-		adapter->hw_write_wx(adapter,
-				mem_crb+MIU_TEST_AGT_CTRL, &temp, 4);
+		NXWR32(adapter, mem_crb+MIU_TEST_AGT_CTRL, temp);
 
 		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			adapter->hw_read_wx(adapter,
-					mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+			temp = NXRD32(adapter, mem_crb + MIU_TEST_AGT_CTRL);
 			if ((temp & MIU_TA_CTL_BUSY) == 0)
 				break;
 		}
@@ -2013,21 +1749,16 @@ netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
 
 	for (i = 0; i < loop; i++) {
 		temp = off8 + (i << 3);
-		adapter->hw_write_wx(adapter,
-				mem_crb + MIU_TEST_AGT_ADDR_LO, &temp, 4);
+		NXWR32(adapter, mem_crb + MIU_TEST_AGT_ADDR_LO, temp);
 		temp = 0;
-		adapter->hw_write_wx(adapter,
-				mem_crb + MIU_TEST_AGT_ADDR_HI, &temp, 4);
+		NXWR32(adapter, mem_crb + MIU_TEST_AGT_ADDR_HI, temp);
 		temp = MIU_TA_CTL_ENABLE;
-		adapter->hw_write_wx(adapter,
-				mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+		NXWR32(adapter, mem_crb + MIU_TEST_AGT_CTRL, temp);
 		temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE;
-		adapter->hw_write_wx(adapter,
-				mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+		NXWR32(adapter, mem_crb + MIU_TEST_AGT_CTRL, temp);
 
 		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			adapter->hw_read_wx(adapter,
-					mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+			temp = NXRD32(adapter, mem_crb + MIU_TEST_AGT_CTRL);
 			if ((temp & MIU_TA_CTL_BUSY) == 0)
 				break;
 		}
@@ -2042,8 +1773,8 @@ netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
 		start = off0[i] >> 2;
 		end   = (off0[i] + sz[i] - 1) >> 2;
 		for (k = start; k <= end; k++) {
-			adapter->hw_read_wx(adapter,
-				mem_crb + MIU_TEST_AGT_RDDATA(k), &temp, 4);
+			temp = NXRD32(adapter,
+				mem_crb + MIU_TEST_AGT_RDDATA(k));
 			word[i] |= ((uint64_t)temp << (32 * k));
 		}
 	}
@@ -2086,29 +1817,14 @@ netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
 int netxen_nic_pci_write_immediate_2M(struct netxen_adapter *adapter,
 		u64 off, u32 data)
 {
-	adapter->hw_write_wx(adapter, off, &data, 4);
+	NXWR32(adapter, off, data);
 
 	return 0;
 }
 
 u32 netxen_nic_pci_read_immediate_2M(struct netxen_adapter *adapter, u64 off)
 {
-	u32 temp;
-	adapter->hw_read_wx(adapter, off, &temp, 4);
-	return temp;
-}
-
-void netxen_nic_pci_write_normalize_2M(struct netxen_adapter *adapter,
-		u64 off, u32 data)
-{
-	adapter->hw_write_wx(adapter, off, &data, 4);
-}
-
-u32 netxen_nic_pci_read_normalize_2M(struct netxen_adapter *adapter, u64 off)
-{
-	u32 temp;
-	adapter->hw_read_wx(adapter, off, &temp, 4);
-	return temp;
+	return NXRD32(adapter, off);
 }
 
 int netxen_nic_get_board_info(struct netxen_adapter *adapter)
@@ -2142,13 +1858,12 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	adapter->ahw.board_type = board_type;
 
 	if (board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
-		u32 gpio = netxen_nic_reg_read(adapter,
-				NETXEN_ROMUSB_GLB_PAD_GPIO_I);
+		u32 gpio = NXRD32(adapter, NETXEN_ROMUSB_GLB_PAD_GPIO_I);
 		if ((gpio & 0x8000) == 0)
 			board_type = NETXEN_BRDTYPE_P3_10G_TP;
 	}
 
-	switch ((netxen_brdtype_t)board_type) {
+	switch (board_type) {
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 		adapter->ahw.port_type = NETXEN_NIC_GBE;
 		break;
@@ -2195,8 +1910,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
 {
 	new_mtu += MTU_FUDGE_FACTOR;
-	netxen_nic_write_w0(adapter,
-		NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
+	NXWR32(adapter, NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
 		new_mtu);
 	return 0;
 }
@@ -2205,21 +1919,12 @@ int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
 {
 	new_mtu += MTU_FUDGE_FACTOR;
 	if (adapter->physical_port == 0)
-		netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
-				new_mtu);
+		NXWR32(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE, new_mtu);
 	else
-		netxen_nic_write_w0(adapter, NETXEN_NIU_XG1_MAX_FRAME_SIZE,
-				new_mtu);
+		NXWR32(adapter, NETXEN_NIU_XG1_MAX_FRAME_SIZE, new_mtu);
 	return 0;
 }
 
-void
-netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
-		unsigned long off, int data)
-{
-	adapter->hw_write_wx(adapter, off, &data, 4);
-}
-
 void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 {
 	__u32 status;
@@ -2234,8 +1939,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 	}
 
 	if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
-		adapter->hw_read_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &port_mode, 4);
+		port_mode = NXRD32(adapter, NETXEN_PORT_MODE_ADDR);
 		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
 			adapter->link_speed   = SPEED_1000;
 			adapter->link_duplex  = DUPLEX_FULL;
@@ -2312,9 +2016,9 @@ void netxen_nic_get_firmware_info(struct netxen_adapter *adapter)
 		addr += sizeof(u32);
 	}
 
-	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_MAJOR, &fw_major, 4);
-	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_MINOR, &fw_minor, 4);
-	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_SUB, &fw_build, 4);
+	fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+	fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+	fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
 
 	adapter->fw_major = fw_major;
 	adapter->fw_version = NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build);
@@ -2337,8 +2041,7 @@ void netxen_nic_get_firmware_info(struct netxen_adapter *adapter)
 			fw_major, fw_minor, fw_build);
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
-		adapter->hw_read_wx(adapter,
-				NETXEN_MIU_MN_CONTROL, &i, 4);
+		i = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
 		adapter->ahw.cut_through = (i & 0x4) ? 1 : 0;
 		dev_info(&pdev->dev, "firmware running in %s mode\n",
 		adapter->ahw.cut_through ? "cut-through" : "legacy");
@@ -2353,9 +2056,9 @@ netxen_nic_wol_supported(struct netxen_adapter *adapter)
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		return 0;
 
-	wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG_NV);
+	wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG_NV);
 	if (wol_cfg & (1UL << adapter->portnum)) {
-		wol_cfg = netxen_nic_reg_read(adapter, NETXEN_WOL_CONFIG);
+		wol_cfg = NXRD32(adapter, NETXEN_WOL_CONFIG);
 		if (wol_cfg & (1 << adapter->portnum))
 			return 1;
 	}
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index 04b47a7993c..d4e83333978 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -36,35 +36,13 @@
 /* Hardware memory size of 128 meg */
 #define NETXEN_MEMADDR_MAX (128 * 1024 * 1024)
 
-#ifndef readq
-static inline u64 readq(void __iomem * addr)
-{
-	return readl(addr) | (((u64) readl(addr + 4)) << 32LL);
-}
-#endif
-
-#ifndef writeq
-static inline void writeq(u64 val, void __iomem * addr)
-{
-	writel(((u32) (val)), (addr));
-	writel(((u32) (val >> 32)), (addr + 4));
-}
-#endif
-
 struct netxen_adapter;
 
 #define NETXEN_PCI_MAPSIZE_BYTES  (NETXEN_PCI_MAPSIZE << 20)
 
-struct netxen_port;
 void netxen_nic_set_link_parameters(struct netxen_adapter *adapter);
 
-typedef u8 netxen_ethernet_macaddr_t[6];
-
 /* Nibble or Byte mode for phy interface (GbE mode only) */
-typedef enum {
-	NETXEN_NIU_10_100_MB = 0,
-	NETXEN_NIU_1000_MB
-} netxen_niu_gbe_ifmode_t;
 
 #define _netxen_crb_get_bit(var, bit)  ((var >> bit) & 0x1)
 
@@ -222,30 +200,28 @@ typedef enum {
 /*
  * PHY-Specific MII control/status registers.
  */
-typedef enum {
-	NETXEN_NIU_GB_MII_MGMT_ADDR_CONTROL = 0,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_STATUS = 1,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_0 = 2,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_1 = 3,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG = 4,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART = 5,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG_MORE = 6,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_NEXTPAGE_XMIT = 7,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART_NEXTPAGE = 8,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_CONTROL = 9,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_STATUS = 10,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_EXTENDED_STATUS = 15,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL = 16,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS = 17,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE = 18,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS = 19,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE = 20,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_RECV_ERROR_COUNT = 21,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_LED_CONTROL = 24,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_LED_OVERRIDE = 25,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE_YET = 26,
-	NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS_MORE = 27
-} netxen_niu_phy_register_t;
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_CONTROL		0
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_STATUS		1
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_0		2
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_1		3
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG		4
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART		5
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG_MORE	6
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_NEXTPAGE_XMIT	7
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART_NEXTPAGE	8
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_CONTROL	9
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_STATUS	10
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_EXTENDED_STATUS	15
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL		16
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS		17
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE		18
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS		19
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE	20
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_RECV_ERROR_COUNT	21
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_CONTROL		24
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_OVERRIDE	25
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE_YET	26
+#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS_MORE	27
 
 /*
  * PHY-Specific Status Register (reg 17).
@@ -417,14 +393,6 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 				       u32 mode);
 
-/* set the MAC address for a given MAC */
-int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
-			   netxen_ethernet_macaddr_t addr);
-
-/* XG version */
-int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
-			      netxen_ethernet_macaddr_t addr);
-
 /* Generic enable for GbE ports. Will detect the speed of the link. */
 int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port);
 
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 0759c35f16a..6f77ad58e3b 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -108,42 +108,6 @@ static void crb_addr_transform_setup(void)
 	crb_addr_transform(I2C0);
 }
 
-int netxen_init_firmware(struct netxen_adapter *adapter)
-{
-	u32 state = 0, loops = 0, err = 0;
-
-	/* Window 1 call */
-	state = adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE);
-
-	if (state == PHAN_INITIALIZE_ACK)
-		return 0;
-
-	while (state != PHAN_INITIALIZE_COMPLETE && loops < 2000) {
-		msleep(1);
-		/* Window 1 call */
-		state = adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE);
-
-		loops++;
-	}
-	if (loops >= 2000) {
-		printk(KERN_ERR "Cmd Peg initialization not complete:%x.\n",
-		       state);
-		err = -EIO;
-		return err;
-	}
-	/* Window 1 call */
-	adapter->pci_write_normalize(adapter,
-			CRB_NIC_CAPABILITIES_HOST, INTR_SCHEME_PERPORT);
-	adapter->pci_write_normalize(adapter,
-			CRB_NIC_MSI_MODE_HOST, MSI_MODE_MULTIFUNC);
-	adapter->pci_write_normalize(adapter,
-			CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
-	adapter->pci_write_normalize(adapter,
-			CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
-
-	return err;
-}
-
 void netxen_release_rx_buffers(struct netxen_adapter *adapter)
 {
 	struct netxen_recv_context *recv_ctx;
@@ -173,9 +137,10 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter)
 	struct netxen_cmd_buffer *cmd_buf;
 	struct netxen_skb_frag *buffrag;
 	int i, j;
+	struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
 
-	cmd_buf = adapter->cmd_buf_arr;
-	for (i = 0; i < adapter->num_txd; i++) {
+	cmd_buf = tx_ring->cmd_buf_arr;
+	for (i = 0; i < tx_ring->num_desc; i++) {
 		buffrag = cmd_buf->frag_array;
 		if (buffrag->dma) {
 			pci_unmap_single(adapter->pdev, buffrag->dma,
@@ -203,20 +168,27 @@ void netxen_free_sw_resources(struct netxen_adapter *adapter)
 {
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
+	struct nx_host_tx_ring *tx_ring;
 	int ring;
 
 	recv_ctx = &adapter->recv_ctx;
+
+	if (recv_ctx->rds_rings == NULL)
+		goto skip_rds;
+
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
-		if (rds_ring->rx_buf_arr) {
-			vfree(rds_ring->rx_buf_arr);
-			rds_ring->rx_buf_arr = NULL;
-		}
+		vfree(rds_ring->rx_buf_arr);
+		rds_ring->rx_buf_arr = NULL;
 	}
+	kfree(recv_ctx->rds_rings);
 
-	if (adapter->cmd_buf_arr)
-		vfree(adapter->cmd_buf_arr);
-	return;
+skip_rds:
+	if (adapter->tx_ring == NULL)
+		return;
+
+	tx_ring = adapter->tx_ring;
+	vfree(tx_ring->cmd_buf_arr);
 }
 
 int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
@@ -224,23 +196,45 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 	struct netxen_recv_context *recv_ctx;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_sds_ring *sds_ring;
+	struct nx_host_tx_ring *tx_ring;
 	struct netxen_rx_buffer *rx_buf;
-	int ring, i, num_rx_bufs;
+	int ring, i, size;
 
 	struct netxen_cmd_buffer *cmd_buf_arr;
 	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
 
-	cmd_buf_arr =
-		(struct netxen_cmd_buffer *)vmalloc(TX_BUFF_RINGSIZE(adapter));
+	size = sizeof(struct nx_host_tx_ring);
+	tx_ring = kzalloc(size, GFP_KERNEL);
+	if (tx_ring == NULL) {
+		dev_err(&pdev->dev, "%s: failed to allocate tx ring struct\n",
+		       netdev->name);
+		return -ENOMEM;
+	}
+	adapter->tx_ring = tx_ring;
+
+	tx_ring->num_desc = adapter->num_txd;
+
+	cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
 	if (cmd_buf_arr == NULL) {
-		printk(KERN_ERR "%s: Failed to allocate cmd buffer ring\n",
+		dev_err(&pdev->dev, "%s: failed to allocate cmd buffer ring\n",
 		       netdev->name);
 		return -ENOMEM;
 	}
-	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(adapter));
-	adapter->cmd_buf_arr = cmd_buf_arr;
+	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
+	tx_ring->cmd_buf_arr = cmd_buf_arr;
 
 	recv_ctx = &adapter->recv_ctx;
+
+	size = adapter->max_rds_rings * sizeof (struct nx_host_rds_ring);
+	rds_ring = kzalloc(size, GFP_KERNEL);
+	if (rds_ring == NULL) {
+		dev_err(&pdev->dev, "%s: failed to allocate rds ring struct\n",
+		       netdev->name);
+		return -ENOMEM;
+	}
+	recv_ctx->rds_rings = rds_ring;
+
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
 		rds_ring = &recv_ctx->rds_rings[ring];
 		switch (ring) {
@@ -292,9 +286,8 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 		 * Now go through all of them, set reference handles
 		 * and put them in the queues.
 		 */
-		num_rx_bufs = rds_ring->num_desc;
 		rx_buf = rds_ring->rx_buf_arr;
-		for (i = 0; i < num_rx_bufs; i++) {
+		for (i = 0; i < rds_ring->num_desc; i++) {
 			list_add_tail(&rx_buf->list,
 					&rds_ring->free_list);
 			rx_buf->ref_handle = i;
@@ -307,8 +300,6 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
 		sds_ring->irq = adapter->msix_entries[ring].vector;
-		sds_ring->clean_tx = (ring == 0);
-		sds_ring->post_rxd = (ring == 0);
 		sds_ring->adapter = adapter;
 		sds_ring->num_desc = adapter->num_rxd;
 
@@ -325,13 +316,15 @@ err_out:
 
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 {
+	adapter->macaddr_set = netxen_p2_nic_set_mac_addr;
+	adapter->set_multi = netxen_p2_nic_set_multi;
+
 	switch (adapter->ahw.port_type) {
 	case NETXEN_NIC_GBE:
 		adapter->enable_phy_interrupts =
 		    netxen_niu_gbe_enable_phy_interrupts;
 		adapter->disable_phy_interrupts =
 		    netxen_niu_gbe_disable_phy_interrupts;
-		adapter->macaddr_set = netxen_niu_macaddr_set;
 		adapter->set_mtu = netxen_nic_set_mtu_gb;
 		adapter->set_promisc = netxen_niu_set_promiscuous_mode;
 		adapter->phy_read = netxen_niu_gbe_phy_read;
@@ -345,7 +338,6 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 		    netxen_niu_xgbe_enable_phy_interrupts;
 		adapter->disable_phy_interrupts =
 		    netxen_niu_xgbe_disable_phy_interrupts;
-		adapter->macaddr_set = netxen_niu_xg_macaddr_set;
 		adapter->set_mtu = netxen_nic_set_mtu_xgb;
 		adapter->init_port = netxen_niu_xg_init_port;
 		adapter->set_promisc = netxen_niu_xg_set_promiscuous_mode;
@@ -359,6 +351,8 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		adapter->set_mtu = nx_fw_cmd_set_mtu;
 		adapter->set_promisc = netxen_p3_nic_set_promisc;
+		adapter->macaddr_set = netxen_p3_nic_set_mac_addr;
+		adapter->set_multi = netxen_p3_nic_set_multi;
 	}
 }
 
@@ -400,8 +394,7 @@ static int rom_lock(struct netxen_adapter *adapter)
 
 	while (!done) {
 		/* acquire semaphore2 from PCI HW block */
-		netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_LOCK),
-				   &done);
+		done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM2_LOCK));
 		if (done == 1)
 			break;
 		if (timeout >= rom_lock_timeout)
@@ -418,7 +411,7 @@ static int rom_lock(struct netxen_adapter *adapter)
 				cpu_relax();	/*This a nop instr on i386 */
 		}
 	}
-	netxen_nic_reg_write(adapter, NETXEN_ROM_LOCK_ID, ROM_LOCK_DRIVER);
+	NXWR32(adapter, NETXEN_ROM_LOCK_ID, ROM_LOCK_DRIVER);
 	return 0;
 }
 
@@ -430,7 +423,7 @@ static int netxen_wait_rom_done(struct netxen_adapter *adapter)
 	cond_resched();
 
 	while (done == 0) {
-		done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS);
+		done = NXRD32(adapter, NETXEN_ROMUSB_GLB_STATUS);
 		done &= 2;
 		timeout++;
 		if (timeout >= rom_max_timeout) {
@@ -443,30 +436,28 @@ static int netxen_wait_rom_done(struct netxen_adapter *adapter)
 
 static void netxen_rom_unlock(struct netxen_adapter *adapter)
 {
-	u32 val;
-
 	/* release semaphore2 */
-	netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(PCIE_SEM2_UNLOCK), &val);
+	NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM2_UNLOCK));
 
 }
 
 static int do_rom_fast_read(struct netxen_adapter *adapter,
 			    int addr, int *valp)
 {
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
 	if (netxen_wait_rom_done(adapter)) {
 		printk("Error waiting for rom done\n");
 		return -EIO;
 	}
 	/* reset abyte_cnt and dummy_byte_cnt */
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
 	udelay(10);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+	NXWR32(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
 
-	*valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
+	*valp = NXRD32(adapter, NETXEN_ROMUSB_ROM_RDATA);
 	return 0;
 }
 
@@ -530,8 +521,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 
 	/* resetall */
 	rom_lock(adapter);
-	netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
-				    0xffffffff);
+	NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0xffffffff);
 	netxen_rom_unlock(adapter);
 
 	if (verbose) {
@@ -655,7 +645,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 			}
 		}
 
-		adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
+		NXWR32(adapter, off, buf[i].data);
 
 		msleep(init_delay);
 	}
@@ -665,36 +655,230 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 
 	/* unreset_net_cache */
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		adapter->hw_read_wx(adapter,
-				NETXEN_ROMUSB_GLB_SW_RESET, &val, 4);
-		netxen_crb_writelit_adapter(adapter,
-				NETXEN_ROMUSB_GLB_SW_RESET, (val & 0xffffff0f));
+		val = NXRD32(adapter, NETXEN_ROMUSB_GLB_SW_RESET);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, (val & 0xffffff0f));
 	}
 
 	/* p2dn replyCount */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_D + 0xec, 0x1e);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_D + 0xec, 0x1e);
 	/* disable_peg_cache 0 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_D + 0x4c, 8);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_D + 0x4c, 8);
 	/* disable_peg_cache 1 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_I + 0x4c, 8);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_I + 0x4c, 8);
 
 	/* peg_clr_all */
 
 	/* peg_clr 0 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x8, 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0xc, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_0 + 0x8, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_0 + 0xc, 0);
 	/* peg_clr 1 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x8, 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0xc, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_1 + 0x8, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_1 + 0xc, 0);
 	/* peg_clr 2 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x8, 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0xc, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_2 + 0x8, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_2 + 0xc, 0);
 	/* peg_clr 3 */
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x8, 0);
-	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0xc, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_3 + 0x8, 0);
+	NXWR32(adapter, NETXEN_CRB_PEG_NET_3 + 0xc, 0);
+	return 0;
+}
+
+int
+netxen_load_firmware(struct netxen_adapter *adapter)
+{
+	u64 *ptr64;
+	u32 i, flashaddr, size;
+	const struct firmware *fw = adapter->fw;
+
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1);
+
+	if (fw) {
+		__le64 data;
+
+		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 8;
+
+		ptr64 = (u64 *)&fw->data[NETXEN_BOOTLD_START];
+		flashaddr = NETXEN_BOOTLD_START;
+
+		for (i = 0; i < size; i++) {
+			data = cpu_to_le64(ptr64[i]);
+			adapter->pci_mem_write(adapter, flashaddr, &data, 8);
+			flashaddr += 8;
+		}
+
+		size = *(u32 *)&fw->data[NX_FW_SIZE_OFFSET];
+		size = (__force u32)cpu_to_le32(size) / 8;
+
+		ptr64 = (u64 *)&fw->data[NETXEN_IMAGE_START];
+		flashaddr = NETXEN_IMAGE_START;
+
+		for (i = 0; i < size; i++) {
+			data = cpu_to_le64(ptr64[i]);
+
+			if (adapter->pci_mem_write(adapter,
+						flashaddr, &data, 8))
+				return -EIO;
+
+			flashaddr += 8;
+		}
+	} else {
+		u32 data;
+
+		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 4;
+		flashaddr = NETXEN_BOOTLD_START;
+
+		for (i = 0; i < size; i++) {
+			if (netxen_rom_fast_read(adapter,
+					flashaddr, (int *)&data) != 0)
+				return -EIO;
+
+			if (adapter->pci_mem_write(adapter,
+						flashaddr, &data, 4))
+				return -EIO;
+
+			flashaddr += 4;
+		}
+	}
+	msleep(1);
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
+	else {
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 0);
+	}
+
+	return 0;
+}
+
+static int
+netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
+{
+	__le32 val;
+	u32 major, minor, build, ver, min_ver, bios;
+	struct pci_dev *pdev = adapter->pdev;
+	const struct firmware *fw = adapter->fw;
+
+	if (fw->size < NX_FW_MIN_SIZE)
+		return -EINVAL;
+
+	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
+	if ((__force u32)val != NETXEN_BDINFO_MAGIC)
+		return -EINVAL;
+
+	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+	major = (__force u32)val & 0xff;
+	minor = ((__force u32)val >> 8) & 0xff;
+	build = (__force u32)val >> 16;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
+	else
+		min_ver = NETXEN_VERSION_CODE(3, 4, 216);
+
+	ver = NETXEN_VERSION_CODE(major, minor, build);
+
+	if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
+		dev_err(&pdev->dev,
+				"%s: firmware version %d.%d.%d unsupported\n",
+				fwname, major, minor, build);
+		return -EINVAL;
+	}
+
+	val = cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
+	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
+	if ((__force u32)val != bios) {
+		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
+				fwname);
+		return -EINVAL;
+	}
+
+	/* check if flashed firmware is newer */
+	if (netxen_rom_fast_read(adapter,
+			NX_FW_VERSION_OFFSET, (int *)&val))
+		return -EIO;
+	major = (__force u32)val & 0xff;
+	minor = ((__force u32)val >> 8) & 0xff;
+	build = (__force u32)val >> 16;
+	if (NETXEN_VERSION_CODE(major, minor, build) > ver)
+		return -EINVAL;
+
+	NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
 	return 0;
 }
 
+static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
+
+void netxen_request_firmware(struct netxen_adapter *adapter)
+{
+	u32 capability, flashed_ver;
+	int fw_type;
+	struct pci_dev *pdev = adapter->pdev;
+	int rc = 0;
+
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+		fw_type = NX_P2_MN_ROMIMAGE;
+		goto request_fw;
+	} else {
+		fw_type = NX_P3_CT_ROMIMAGE;
+		goto request_fw;
+	}
+
+request_mn:
+	capability = 0;
+
+	netxen_rom_fast_read(adapter,
+			NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
+	if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
+		capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
+		if (capability & NX_PEG_TUNE_MN_PRESENT) {
+			fw_type = NX_P3_MN_ROMIMAGE;
+			goto request_fw;
+		}
+	}
+
+request_fw:
+	rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
+	if (rc != 0) {
+		if (fw_type == NX_P3_CT_ROMIMAGE) {
+			msleep(1);
+			goto request_mn;
+		}
+
+		adapter->fw = NULL;
+		goto done;
+	}
+
+	rc = netxen_validate_firmware(adapter, fw_name[fw_type]);
+	if (rc != 0) {
+		release_firmware(adapter->fw);
+
+		if (fw_type == NX_P3_CT_ROMIMAGE) {
+			msleep(1);
+			goto request_mn;
+		}
+
+		adapter->fw = NULL;
+		goto done;
+	}
+
+done:
+	if (adapter->fw)
+		dev_info(&pdev->dev, "loading firmware from file %s\n",
+				fw_name[fw_type]);
+	else
+		dev_info(&pdev->dev, "loading firmware from flash\n");
+}
+
+
+void
+netxen_release_firmware(struct netxen_adapter *adapter)
+{
+	if (adapter->fw)
+		release_firmware(adapter->fw);
+}
+
 int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 {
 	uint64_t addr;
@@ -715,12 +899,12 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 	hi = (addr >> 32) & 0xffffffff;
 	lo = addr & 0xffffffff;
 
-	adapter->pci_write_normalize(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI, hi);
-	adapter->pci_write_normalize(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO, lo);
+	NXWR32(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI, hi);
+	NXWR32(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO, lo);
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		uint32_t temp = 0;
-		adapter->hw_write_wx(adapter, CRB_HOST_DUMMY_BUF, &temp, 4);
+		NXWR32(adapter, CRB_HOST_DUMMY_BUF, temp);
 	}
 
 	return 0;
@@ -762,8 +946,7 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 
 	if (!pegtune_val) {
 		do {
-			val = adapter->pci_read_normalize(adapter,
-					CRB_CMDPEG_STATE);
+			val = NXRD32(adapter, CRB_CMDPEG_STATE);
 
 			if (val == PHAN_INITIALIZE_COMPLETE ||
 				val == PHAN_INITIALIZE_ACK)
@@ -774,7 +957,7 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 		} while (--retries);
 
 		if (!retries) {
-			pegtune_val = adapter->pci_read_normalize(adapter,
+			pegtune_val = NXRD32(adapter,
 					NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
 			printk(KERN_WARNING "netxen_phantom_init: init failed, "
 					"pegtune_val=%x\n", pegtune_val);
@@ -785,13 +968,14 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 	return 0;
 }
 
-int netxen_receive_peg_ready(struct netxen_adapter *adapter)
+static int
+netxen_receive_peg_ready(struct netxen_adapter *adapter)
 {
 	u32 val = 0;
 	int retries = 2000;
 
 	do {
-		val = adapter->pci_read_normalize(adapter, CRB_RCVPEG_STATE);
+		val = NXRD32(adapter, CRB_RCVPEG_STATE);
 
 		if (val == PHAN_PEG_RCV_INITIALIZED)
 			return 0;
@@ -809,6 +993,93 @@ int netxen_receive_peg_ready(struct netxen_adapter *adapter)
 	return 0;
 }
 
+int netxen_init_firmware(struct netxen_adapter *adapter)
+{
+	int err;
+
+	err = netxen_receive_peg_ready(adapter);
+	if (err)
+		return err;
+
+	NXWR32(adapter, CRB_NIC_CAPABILITIES_HOST, INTR_SCHEME_PERPORT);
+	NXWR32(adapter, CRB_NIC_MSI_MODE_HOST, MSI_MODE_MULTIFUNC);
+	NXWR32(adapter, CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
+	NXWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
+
+	if (adapter->fw_version >= NETXEN_VERSION_CODE(4, 0, 222)) {
+		adapter->capabilities = NXRD32(adapter, CRB_FW_CAPABILITIES_1);
+	}
+
+	return err;
+}
+
+static void
+netxen_handle_linkevent(struct netxen_adapter *adapter, nx_fw_msg_t *msg)
+{
+	u32 cable_OUI;
+	u16 cable_len;
+	u16 link_speed;
+	u8  link_status, module, duplex, autoneg;
+	struct net_device *netdev = adapter->netdev;
+
+	adapter->has_link_events = 1;
+
+	cable_OUI = msg->body[1] & 0xffffffff;
+	cable_len = (msg->body[1] >> 32) & 0xffff;
+	link_speed = (msg->body[1] >> 48) & 0xffff;
+
+	link_status = msg->body[2] & 0xff;
+	duplex = (msg->body[2] >> 16) & 0xff;
+	autoneg = (msg->body[2] >> 24) & 0xff;
+
+	module = (msg->body[2] >> 8) & 0xff;
+	if (module == LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE) {
+		printk(KERN_INFO "%s: unsupported cable: OUI 0x%x, length %d\n",
+				netdev->name, cable_OUI, cable_len);
+	} else if (module == LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN) {
+		printk(KERN_INFO "%s: unsupported cable length %d\n",
+				netdev->name, cable_len);
+	}
+
+	netxen_advert_link_change(adapter, link_status);
+
+	/* update link parameters */
+	if (duplex == LINKEVENT_FULL_DUPLEX)
+		adapter->link_duplex = DUPLEX_FULL;
+	else
+		adapter->link_duplex = DUPLEX_HALF;
+	adapter->module_type = module;
+	adapter->link_autoneg = autoneg;
+	adapter->link_speed = link_speed;
+}
+
+static void
+netxen_handle_fw_message(int desc_cnt, int index,
+		struct nx_host_sds_ring *sds_ring)
+{
+	nx_fw_msg_t msg;
+	struct status_desc *desc;
+	int i = 0, opcode;
+
+	while (desc_cnt > 0 && i < 8) {
+		desc = &sds_ring->desc_head[index];
+		msg.words[i++] = le64_to_cpu(desc->status_desc_data[0]);
+		msg.words[i++] = le64_to_cpu(desc->status_desc_data[1]);
+
+		index = get_next_index(index, sds_ring->num_desc);
+		desc_cnt--;
+	}
+
+	opcode = netxen_get_nic_msg_opcode(msg.body[0]);
+	switch (opcode) {
+	case NX_NIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE:
+		netxen_handle_linkevent(sds_ring->adapter, &msg);
+		break;
+	default:
+		break;
+	}
+}
+
 static int
 netxen_alloc_rx_skb(struct netxen_adapter *adapter,
 		struct nx_host_rds_ring *rds_ring,
@@ -874,7 +1145,8 @@ no_skb:
 
 static struct netxen_rx_buffer *
 netxen_process_rcv(struct netxen_adapter *adapter,
-		int ring, int index, int length, int cksum, int pkt_offset)
+		int ring, int index, int length, int cksum, int pkt_offset,
+		struct nx_host_sds_ring *sds_ring)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
@@ -902,7 +1174,7 @@ netxen_process_rcv(struct netxen_adapter *adapter,
 
 	skb->protocol = eth_type_trans(skb, netdev);
 
-	netif_receive_skb(skb);
+	napi_gro_receive(&sds_ring->napi, skb);
 
 	adapter->stats.no_rcv++;
 	adapter->stats.rxbytes += length;
@@ -927,35 +1199,53 @@ netxen_process_rcv_ring(struct nx_host_sds_ring *sds_ring, int max)
 
 	int count = 0;
 	u64 sts_data;
-	int opcode, ring, index, length, cksum, pkt_offset;
+	int opcode, ring, index, length, cksum, pkt_offset, desc_cnt;
 
 	while (count < max) {
 		desc = &sds_ring->desc_head[consumer];
-		sts_data = le64_to_cpu(desc->status_desc_data);
+		sts_data = le64_to_cpu(desc->status_desc_data[0]);
 
 		if (!(sts_data & STATUS_OWNER_HOST))
 			break;
 
+		desc_cnt = netxen_get_sts_desc_cnt(sts_data);
 		ring   = netxen_get_sts_type(sts_data);
+
 		if (ring > RCV_RING_JUMBO)
-			continue;
+			goto skip;
 
 		opcode = netxen_get_sts_opcode(sts_data);
 
+		switch (opcode) {
+		case NETXEN_NIC_RXPKT_DESC:
+		case NETXEN_OLD_RXPKT_DESC:
+			break;
+		case NETXEN_NIC_RESPONSE_DESC:
+			netxen_handle_fw_message(desc_cnt, consumer, sds_ring);
+		default:
+			goto skip;
+		}
+
+		WARN_ON(desc_cnt > 1);
+
 		index  = netxen_get_sts_refhandle(sts_data);
 		length = netxen_get_sts_totallength(sts_data);
 		cksum  = netxen_get_sts_status(sts_data);
 		pkt_offset = netxen_get_sts_pkt_offset(sts_data);
 
 		rxbuf = netxen_process_rcv(adapter, ring, index,
-				length, cksum, pkt_offset);
+				length, cksum, pkt_offset, sds_ring);
 
 		if (rxbuf)
 			list_add_tail(&rxbuf->list, &sds_ring->free_list[ring]);
 
-		desc->status_desc_data = cpu_to_le64(STATUS_OWNER_PHANTOM);
-
-		consumer = get_next_index(consumer, sds_ring->num_desc);
+skip:
+		for (; desc_cnt > 0; desc_cnt--) {
+			desc = &sds_ring->desc_head[consumer];
+			desc->status_desc_data[0] =
+				cpu_to_le64(STATUS_OWNER_PHANTOM);
+			consumer = get_next_index(consumer, sds_ring->num_desc);
+		}
 		count++;
 	}
 
@@ -980,8 +1270,7 @@ netxen_process_rcv_ring(struct nx_host_sds_ring *sds_ring, int max)
 
 	if (count) {
 		sds_ring->consumer = consumer;
-		adapter->pci_write_normalize(adapter,
-				sds_ring->crb_sts_consumer, consumer);
+		NXWR32(adapter, sds_ring->crb_sts_consumer, consumer);
 	}
 
 	return count;
@@ -990,23 +1279,24 @@ netxen_process_rcv_ring(struct nx_host_sds_ring *sds_ring, int max)
 /* Process Command status ring */
 int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 {
-	u32 last_consumer, consumer;
+	u32 sw_consumer, hw_consumer;
 	int count = 0, i;
 	struct netxen_cmd_buffer *buffer;
 	struct pci_dev *pdev = adapter->pdev;
 	struct net_device *netdev = adapter->netdev;
 	struct netxen_skb_frag *frag;
 	int done = 0;
+	struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
 
 	if (!spin_trylock(&adapter->tx_clean_lock))
 		return 1;
 
-	last_consumer = adapter->last_cmd_consumer;
-	barrier(); /* cmd_consumer can change underneath */
-	consumer = le32_to_cpu(*(adapter->cmd_consumer));
+	sw_consumer = tx_ring->sw_consumer;
+	barrier(); /* hw_consumer can change underneath */
+	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
 
-	while (last_consumer != consumer) {
-		buffer = &adapter->cmd_buf_arr[last_consumer];
+	while (sw_consumer != hw_consumer) {
+		buffer = &tx_ring->cmd_buf_arr[sw_consumer];
 		if (buffer->skb) {
 			frag = &buffer->frag_array[0];
 			pci_unmap_single(pdev, frag->dma, frag->length,
@@ -1024,16 +1314,16 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 			buffer->skb = NULL;
 		}
 
-		last_consumer = get_next_index(last_consumer,
-					       adapter->num_txd);
+		sw_consumer = get_next_index(sw_consumer, tx_ring->num_desc);
 		if (++count >= MAX_STATUS_HANDLE)
 			break;
 	}
 
-	if (count) {
-		adapter->last_cmd_consumer = last_consumer;
+	tx_ring->sw_consumer = sw_consumer;
+
+	if (count && netif_running(netdev)) {
 		smp_mb();
-		if (netif_queue_stopped(netdev) && netif_running(netdev)) {
+		if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
 			netif_tx_lock(netdev);
 			netif_wake_queue(netdev);
 			smp_mb();
@@ -1053,9 +1343,9 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
 	 * There is still a possible race condition and the host could miss an
 	 * interrupt. The card has to take care of this.
 	 */
-	barrier(); /* cmd_consumer can change underneath */
-	consumer = le32_to_cpu(*(adapter->cmd_consumer));
-	done = (last_consumer == consumer);
+	barrier(); /* hw_consumer can change underneath */
+	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
+	done = (sw_consumer == hw_consumer);
 	spin_unlock(&adapter->tx_clean_lock);
 
 	return (done);
@@ -1099,8 +1389,7 @@ netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ringid,
 
 	if (count) {
 		rds_ring->producer = producer;
-		adapter->pci_write_normalize(adapter,
-				rds_ring->crb_rcv_producer,
+		NXWR32(adapter, rds_ring->crb_rcv_producer,
 				(producer-1) & (rds_ring->num_desc-1));
 
 		if (adapter->fw_major < 4) {
@@ -1160,10 +1449,8 @@ netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 
 	if (count) {
 		rds_ring->producer = producer;
-		adapter->pci_write_normalize(adapter,
-			rds_ring->crb_rcv_producer,
+		NXWR32(adapter, rds_ring->crb_rcv_producer,
 				(producer - 1) & (rds_ring->num_desc - 1));
-			wmb();
 	}
 	spin_unlock(&rds_ring->lock);
 }
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index aef77289bd3..98737ef7293 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -29,7 +29,7 @@
  */
 
 #include <linux/vmalloc.h>
-#include <linux/highmem.h>
+#include <linux/interrupt.h>
 #include "netxen_nic_hw.h"
 
 #include "netxen_nic.h"
@@ -107,10 +107,9 @@ static uint32_t crb_cmd_producer[4] = {
 
 void
 netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
-		uint32_t crb_producer)
+		struct nx_host_tx_ring *tx_ring, u32 producer)
 {
-	adapter->pci_write_normalize(adapter,
-			adapter->crb_addr_cmd_producer, crb_producer);
+	NXWR32(adapter, tx_ring->crb_cmd_producer, producer);
 }
 
 static uint32_t crb_cmd_consumer[4] = {
@@ -120,10 +119,9 @@ static uint32_t crb_cmd_consumer[4] = {
 
 static inline void
 netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
-		u32 crb_consumer)
+		struct nx_host_tx_ring *tx_ring, u32 consumer)
 {
-	adapter->pci_write_normalize(adapter,
-			adapter->crb_addr_cmd_consumer, crb_consumer);
+	NXWR32(adapter, tx_ring->crb_cmd_consumer, consumer);
 }
 
 static uint32_t msi_tgt_status[8] = {
@@ -139,37 +137,54 @@ static inline void netxen_nic_disable_int(struct nx_host_sds_ring *sds_ring)
 {
 	struct netxen_adapter *adapter = sds_ring->adapter;
 
-	adapter->pci_write_normalize(adapter, sds_ring->crb_intr_mask, 0);
+	NXWR32(adapter, sds_ring->crb_intr_mask, 0);
 }
 
 static inline void netxen_nic_enable_int(struct nx_host_sds_ring *sds_ring)
 {
 	struct netxen_adapter *adapter = sds_ring->adapter;
 
-	adapter->pci_write_normalize(adapter, sds_ring->crb_intr_mask, 0x1);
+	NXWR32(adapter, sds_ring->crb_intr_mask, 0x1);
 
 	if (!NETXEN_IS_MSI_FAMILY(adapter))
 		adapter->pci_write_immediate(adapter,
 				adapter->legacy_intr.tgt_mask_reg, 0xfbff);
 }
 
+static int
+netxen_alloc_sds_rings(struct netxen_recv_context *recv_ctx, int count)
+{
+	int size = sizeof(struct nx_host_sds_ring) * count;
+
+	recv_ctx->sds_rings = kzalloc(size, GFP_KERNEL);
+
+	return (recv_ctx->sds_rings == NULL);
+}
+
 static void
+netxen_free_sds_rings(struct netxen_recv_context *recv_ctx)
+{
+	if (recv_ctx->sds_rings != NULL)
+		kfree(recv_ctx->sds_rings);
+}
+
+static int
 netxen_napi_add(struct netxen_adapter *adapter, struct net_device *netdev)
 {
 	int ring;
 	struct nx_host_sds_ring *sds_ring;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
 
-	if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
-		adapter->max_sds_rings = (num_online_cpus() >= 4) ? 4 : 2;
-	else
-		adapter->max_sds_rings = 1;
+	if (netxen_alloc_sds_rings(recv_ctx, adapter->max_sds_rings))
+		return 1;
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
 		netif_napi_add(netdev, &sds_ring->napi,
 				netxen_nic_poll, NETXEN_NETDEV_WEIGHT);
 	}
+
+	return 0;
 }
 
 static void
@@ -195,8 +210,9 @@ netxen_napi_disable(struct netxen_adapter *adapter)
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
-		netxen_nic_disable_int(sds_ring);
 		napi_disable(&sds_ring->napi);
+		netxen_nic_disable_int(sds_ring);
+		synchronize_irq(sds_ring->irq);
 	}
 }
 
@@ -240,7 +256,7 @@ nx_update_dma_mask(struct netxen_adapter *adapter)
 
 	change = 0;
 
-	shift = netxen_nic_reg_read(adapter, CRB_DMA_SHIFT);
+	shift = NXRD32(adapter, CRB_DMA_SHIFT);
 	if (shift >= 32)
 		return 0;
 
@@ -268,10 +284,21 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 	else if (adapter->ahw.port_type == NETXEN_NIC_GBE)
 		adapter->num_rxd = MAX_RCV_DESCRIPTORS_1G;
 
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+	adapter->msix_supported = 0;
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		adapter->msix_supported = !!use_msi_x;
-	else
-		adapter->msix_supported = 0;
+		adapter->rss_supported = !!use_msi_x;
+	} else if (adapter->fw_version >= NETXEN_VERSION_CODE(3, 4, 336)) {
+		switch (adapter->ahw.board_type) {
+		case NETXEN_BRDTYPE_P2_SB31_10G:
+		case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
+			adapter->msix_supported = !!use_msi_x;
+			adapter->rss_supported = !!use_msi_x;
+			break;
+		default:
+			break;
+		}
+	}
 
 	adapter->num_txd = MAX_CMD_DESCRIPTORS_HOST;
 	adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS;
@@ -287,43 +314,34 @@ netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
 
 	if (first_boot == 0x55555555) {
 		/* This is the first boot after power up */
-		adapter->pci_write_normalize(adapter,
-			NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
+		NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
 
 		if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
 			return 0;
 
 		/* PCI bus master workaround */
-		adapter->hw_read_wx(adapter,
-			NETXEN_PCIE_REG(0x4), &first_boot, 4);
+		first_boot = NXRD32(adapter, NETXEN_PCIE_REG(0x4));
 		if (!(first_boot & 0x4)) {
 			first_boot |= 0x4;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PCIE_REG(0x4), &first_boot, 4);
-			adapter->hw_read_wx(adapter,
-				NETXEN_PCIE_REG(0x4), &first_boot, 4);
+			NXWR32(adapter, NETXEN_PCIE_REG(0x4), first_boot);
+			first_boot = NXRD32(adapter, NETXEN_PCIE_REG(0x4));
 		}
 
 		/* This is the first boot after power up */
-		adapter->hw_read_wx(adapter,
-			NETXEN_ROMUSB_GLB_SW_RESET, &first_boot, 4);
+		first_boot = NXRD32(adapter, NETXEN_ROMUSB_GLB_SW_RESET);
 		if (first_boot != 0x80000f) {
 			/* clear the register for future unloads/loads */
-			adapter->pci_write_normalize(adapter,
-					NETXEN_CAM_RAM(0x1fc), 0);
+			NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), 0);
 			return -EIO;
 		}
 
 		/* Start P2 boot loader */
-		val = adapter->pci_read_normalize(adapter,
-				NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
+		val = NXRD32(adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
 		timeout = 0;
 		do {
 			msleep(1);
-			val = adapter->pci_read_normalize(adapter,
-					NETXEN_CAM_RAM(0x1fc));
+			val = NXRD32(adapter, NETXEN_CAM_RAM(0x1fc));
 
 			if (++timeout > 5000)
 				return -EIO;
@@ -342,24 +360,19 @@ static void netxen_set_port_mode(struct netxen_adapter *adapter)
 		(val == NETXEN_BRDTYPE_P3_XG_LOM)) {
 		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
 			data = NETXEN_PORT_MODE_802_3_AP;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		} else if (port_mode == NETXEN_PORT_MODE_XG) {
 			data = NETXEN_PORT_MODE_XG;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		} else if (port_mode == NETXEN_PORT_MODE_AUTO_NEG_1G) {
 			data = NETXEN_PORT_MODE_AUTO_NEG_1G;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		} else if (port_mode == NETXEN_PORT_MODE_AUTO_NEG_XG) {
 			data = NETXEN_PORT_MODE_AUTO_NEG_XG;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		} else {
 			data = NETXEN_PORT_MODE_AUTO_NEG;
-			adapter->hw_write_wx(adapter,
-				NETXEN_PORT_MODE_ADDR, &data, 4);
+			NXWR32(adapter, NETXEN_PORT_MODE_ADDR, data);
 		}
 
 		if ((wol_port_mode != NETXEN_PORT_MODE_802_3_AP) &&
@@ -368,8 +381,7 @@ static void netxen_set_port_mode(struct netxen_adapter *adapter)
 			(wol_port_mode != NETXEN_PORT_MODE_AUTO_NEG_XG)) {
 			wol_port_mode = NETXEN_PORT_MODE_AUTO_NEG;
 		}
-		adapter->hw_write_wx(adapter, NETXEN_WOL_PORT_MODE,
-			&wol_port_mode, 4);
+		NXWR32(adapter, NETXEN_WOL_PORT_MODE, wol_port_mode);
 	}
 }
 
@@ -389,11 +401,11 @@ static void netxen_set_msix_bit(struct pci_dev *pdev, int enable)
 	}
 }
 
-static void netxen_init_msix_entries(struct netxen_adapter *adapter)
+static void netxen_init_msix_entries(struct netxen_adapter *adapter, int count)
 {
 	int i;
 
-	for (i = 0; i < MSIX_ENTRIES_PER_ADAPTER; i++)
+	for (i = 0; i < count; i++)
 		adapter->msix_entries[i].entry = i;
 }
 
@@ -424,20 +436,38 @@ netxen_read_mac_addr(struct netxen_adapter *adapter)
 
 	if (!is_valid_ether_addr(netdev->perm_addr))
 		dev_warn(&pdev->dev, "Bad MAC address %pM.\n", netdev->dev_addr);
-	else
-		adapter->macaddr_set(adapter, netdev->dev_addr);
 
 	return 0;
 }
 
+int netxen_nic_set_mac(struct net_device *netdev, void *p)
+{
+	struct netxen_adapter *adapter = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	if (netif_running(netdev)) {
+		netif_device_detach(netdev);
+		netxen_napi_disable(adapter);
+	}
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	adapter->macaddr_set(adapter, addr->sa_data);
+
+	if (netif_running(netdev)) {
+		netif_device_attach(netdev);
+		netxen_napi_enable(adapter);
+	}
+	return 0;
+}
+
 static void netxen_set_multicast_list(struct net_device *dev)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
 
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		netxen_p3_nic_set_multi(dev);
-	else
-		netxen_p2_nic_set_multi(dev);
+	adapter->set_multi(dev);
 }
 
 static const struct net_device_ops netxen_netdev_ops = {
@@ -460,10 +490,17 @@ netxen_setup_intr(struct netxen_adapter *adapter)
 {
 	struct netxen_legacy_intr_set *legacy_intrp;
 	struct pci_dev *pdev = adapter->pdev;
+	int err, num_msix;
+
+	if (adapter->rss_supported) {
+		num_msix = (num_online_cpus() >= MSIX_ENTRIES_PER_ADAPTER) ?
+			MSIX_ENTRIES_PER_ADAPTER : 2;
+	} else
+		num_msix = 1;
+
+	adapter->max_sds_rings = 1;
 
 	adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
-	adapter->intr_scheme = -1;
-	adapter->msi_mode = -1;
 
 	if (adapter->ahw.revision_id >= NX_P3_B0)
 		legacy_intrp = &legacy_intr[adapter->ahw.pci_func];
@@ -478,24 +515,36 @@ netxen_setup_intr(struct netxen_adapter *adapter)
 
 	if (adapter->msix_supported) {
 
-		netxen_init_msix_entries(adapter);
-		if (pci_enable_msix(pdev, adapter->msix_entries,
-					MSIX_ENTRIES_PER_ADAPTER))
-			goto request_msi;
+		netxen_init_msix_entries(adapter, num_msix);
+		err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
+		if (err == 0) {
+			adapter->flags |= NETXEN_NIC_MSIX_ENABLED;
+			netxen_set_msix_bit(pdev, 1);
 
-		adapter->flags |= NETXEN_NIC_MSIX_ENABLED;
-		netxen_set_msix_bit(pdev, 1);
-		dev_info(&pdev->dev, "using msi-x interrupts\n");
+			if (adapter->rss_supported)
+				adapter->max_sds_rings = num_msix;
 
-	} else {
-request_msi:
-		if (use_msi && !pci_enable_msi(pdev)) {
-			adapter->flags |= NETXEN_NIC_MSI_ENABLED;
-			dev_info(&pdev->dev, "using msi interrupts\n");
-		} else
-			dev_info(&pdev->dev, "using legacy interrupts\n");
+			dev_info(&pdev->dev, "using msi-x interrupts\n");
+			return;
+		}
+
+		if (err > 0)
+			pci_disable_msix(pdev);
+
+		/* fall through for msi */
+	}
+
+	if (use_msi && !pci_enable_msi(pdev)) {
+		adapter->flags |= NETXEN_NIC_MSI_ENABLED;
+		adapter->msi_tgt_status =
+			msi_tgt_status[adapter->ahw.pci_func];
+		dev_info(&pdev->dev, "using msi interrupts\n");
 		adapter->msix_entries[0].vector = pdev->irq;
+		return;
 	}
+
+	dev_info(&pdev->dev, "using legacy interrupts\n");
+	adapter->msix_entries[0].vector = pdev->irq;
 }
 
 static void
@@ -552,8 +601,6 @@ netxen_setup_pci_map(struct netxen_adapter *adapter)
 	adapter->hw_read_wx = netxen_nic_hw_read_wx_128M;
 	adapter->pci_read_immediate = netxen_nic_pci_read_immediate_128M;
 	adapter->pci_write_immediate = netxen_nic_pci_write_immediate_128M;
-	adapter->pci_read_normalize = netxen_nic_pci_read_normalize_128M;
-	adapter->pci_write_normalize = netxen_nic_pci_write_normalize_128M;
 	adapter->pci_set_window = netxen_nic_pci_set_window_128M;
 	adapter->pci_mem_read = netxen_nic_pci_mem_read_128M;
 	adapter->pci_mem_write = netxen_nic_pci_mem_write_128M;
@@ -575,9 +622,6 @@ netxen_setup_pci_map(struct netxen_adapter *adapter)
 		adapter->pci_read_immediate = netxen_nic_pci_read_immediate_2M;
 		adapter->pci_write_immediate =
 			netxen_nic_pci_write_immediate_2M;
-		adapter->pci_read_normalize = netxen_nic_pci_read_normalize_2M;
-		adapter->pci_write_normalize =
-			netxen_nic_pci_write_normalize_2M;
 		adapter->pci_set_window = netxen_nic_pci_set_window_2M;
 		adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
 		adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
@@ -643,25 +687,22 @@ err_out:
 }
 
 static int
-netxen_start_firmware(struct netxen_adapter *adapter)
+netxen_start_firmware(struct netxen_adapter *adapter, int request_fw)
 {
 	int val, err, first_boot;
 	struct pci_dev *pdev = adapter->pdev;
 
 	int first_driver = 0;
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
-		if (adapter->ahw.pci_func == 0)
-			first_driver = 1;
-	} else {
-		if (adapter->portnum == 0)
-			first_driver = 1;
-	}
+
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		first_driver = (adapter->portnum == 0);
+	else
+		first_driver = (adapter->ahw.pci_func == 0);
 
 	if (!first_driver)
 		return 0;
 
-	first_boot = adapter->pci_read_normalize(adapter,
-			NETXEN_CAM_RAM(0x1fc));
+	first_boot = NXRD32(adapter, NETXEN_CAM_RAM(0x1fc));
 
 	err = netxen_check_hw_init(adapter, first_boot);
 	if (err) {
@@ -669,14 +710,16 @@ netxen_start_firmware(struct netxen_adapter *adapter)
 		return err;
 	}
 
+	if (request_fw)
+		netxen_request_firmware(adapter);
+
 	if (first_boot != 0x55555555) {
-		adapter->pci_write_normalize(adapter,
-					CRB_CMDPEG_STATE, 0);
+		NXWR32(adapter, CRB_CMDPEG_STATE, 0);
 		netxen_pinit_from_rom(adapter, 0);
 		msleep(1);
 	}
 
-	netxen_nic_reg_write(adapter, CRB_DMA_SHIFT, 0x55555555);
+	NXWR32(adapter, CRB_DMA_SHIFT, 0x55555555);
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		netxen_set_port_mode(adapter);
 
@@ -688,8 +731,7 @@ netxen_start_firmware(struct netxen_adapter *adapter)
 		val = 0x7654;
 		if (adapter->ahw.port_type == NETXEN_NIC_XGBE)
 			val |= 0x0f000000;
-		netxen_crb_writelit_adapter(adapter,
-				NETXEN_MAC_ADDR_CNTL_REG, val);
+		NXWR32(adapter, NETXEN_MAC_ADDR_CNTL_REG, val);
 
 	}
 
@@ -703,7 +745,7 @@ netxen_start_firmware(struct netxen_adapter *adapter)
 	val = (_NETXEN_NIC_LINUX_MAJOR << 16)
 		| ((_NETXEN_NIC_LINUX_MINOR << 8))
 		| (_NETXEN_NIC_LINUX_SUBVERSION);
-	adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, val);
+	NXWR32(adapter, CRB_DRIVER_VERSION, val);
 
 	/* Handshake with the card before we register the devices. */
 	err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
@@ -726,15 +768,6 @@ netxen_nic_request_irq(struct netxen_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
 
-	if ((adapter->msi_mode != MSI_MODE_MULTIFUNC) ||
-		(adapter->intr_scheme != INTR_SCHEME_PERPORT)) {
-		printk(KERN_ERR "%s: Firmware interrupt scheme is "
-				"incompatible with driver\n",
-				netdev->name);
-		adapter->driver_mismatch = 1;
-		return -EINVAL;
-	}
-
 	if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
 		handler = netxen_msix_intr;
 	else if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
@@ -747,7 +780,7 @@ netxen_nic_request_irq(struct netxen_adapter *adapter)
 
 	for (ring = 0; ring < adapter->max_sds_rings; ring++) {
 		sds_ring = &recv_ctx->sds_rings[ring];
-		sprintf(sds_ring->name, "%16s[%d]", netdev->name, ring);
+		sprintf(sds_ring->name, "%s[%d]", netdev->name, ring);
 		err = request_irq(sds_ring->irq, handler,
 				  flags, sds_ring->name, sds_ring);
 		if (err)
@@ -782,22 +815,26 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
 				netxen_nic_driver_name, adapter->portnum);
 		return err;
 	}
-	adapter->macaddr_set(adapter, netdev->dev_addr);
-
-	netxen_nic_set_link_parameters(adapter);
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		adapter->macaddr_set(adapter, netdev->dev_addr);
 
-	netxen_set_multicast_list(netdev);
-	if (adapter->set_mtu)
-		adapter->set_mtu(adapter, netdev->mtu);
+	adapter->set_multi(netdev);
+	adapter->set_mtu(adapter, netdev->mtu);
 
 	adapter->ahw.linkup = 0;
-	mod_timer(&adapter->watchdog_timer, jiffies);
 
 	netxen_napi_enable(adapter);
 
 	if (adapter->max_sds_rings > 1)
 		netxen_config_rss(adapter, 1);
 
+	if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)
+		netxen_linkevent_request(adapter, 1);
+	else
+		netxen_nic_set_link_parameters(adapter);
+
+	mod_timer(&adapter->watchdog_timer, jiffies);
+
 	return 0;
 }
 
@@ -806,11 +843,15 @@ netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
 {
 	netif_carrier_off(netdev);
 	netif_stop_queue(netdev);
-	netxen_napi_disable(adapter);
 
 	if (adapter->stop_port)
 		adapter->stop_port(adapter);
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		netxen_p3_free_mac_list(adapter);
+
+	netxen_napi_disable(adapter);
+
 	netxen_release_tx_buffers(adapter);
 
 	FLUSH_SCHEDULED_WORK();
@@ -825,6 +866,7 @@ netxen_nic_attach(struct netxen_adapter *adapter)
 	struct pci_dev *pdev = adapter->pdev;
 	int err, ring;
 	struct nx_host_rds_ring *rds_ring;
+	struct nx_host_tx_ring *tx_ring;
 
 	err = netxen_init_firmware(adapter);
 	if (err != 0) {
@@ -854,13 +896,12 @@ netxen_nic_attach(struct netxen_adapter *adapter)
 	}
 
 	if (adapter->fw_major < 4) {
-		adapter->crb_addr_cmd_producer =
-			crb_cmd_producer[adapter->portnum];
-		adapter->crb_addr_cmd_consumer =
-			crb_cmd_consumer[adapter->portnum];
+		tx_ring = adapter->tx_ring;
+		tx_ring->crb_cmd_producer = crb_cmd_producer[adapter->portnum];
+		tx_ring->crb_cmd_consumer = crb_cmd_consumer[adapter->portnum];
 
-		netxen_nic_update_cmd_producer(adapter, 0);
-		netxen_nic_update_cmd_consumer(adapter, 0);
+		netxen_nic_update_cmd_producer(adapter, tx_ring, 0);
+		netxen_nic_update_cmd_consumer(adapter, tx_ring, 0);
 	}
 
 	for (ring = 0; ring < adapter->max_rds_rings; ring++) {
@@ -889,10 +930,9 @@ err_out_free_sw:
 static void
 netxen_nic_detach(struct netxen_adapter *adapter)
 {
-	netxen_nic_free_irq(adapter);
-
 	netxen_release_rx_buffers(adapter);
 	netxen_free_hw_resources(adapter);
+	netxen_nic_free_irq(adapter);
 	netxen_free_sw_resources(adapter);
 
 	adapter->is_up = 0;
@@ -957,6 +997,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	rwlock_init(&adapter->adapter_lock);
 	spin_lock_init(&adapter->tx_clean_lock);
+	INIT_LIST_HEAD(&adapter->mac_list);
 
 	err = netxen_setup_pci_map(adapter);
 	if (err)
@@ -979,6 +1020,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
 
 	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+	netdev->features |= (NETIF_F_GRO);
 	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
 
 	if (NX_IS_REVISION_P3(revision_id)) {
@@ -1011,7 +1053,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	err = netxen_start_firmware(adapter);
+	err = netxen_start_firmware(adapter, 1);
 	if (err)
 		goto err_out_iounmap;
 
@@ -1024,8 +1066,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	adapter->physical_port = adapter->portnum;
 	if (adapter->fw_major < 4) {
-		i = adapter->pci_read_normalize(adapter,
-				CRB_V2P(adapter->portnum));
+		i = NXRD32(adapter, CRB_V2P(adapter->portnum));
 		if (i != 0x55555555)
 			adapter->physical_port = i;
 	}
@@ -1036,10 +1077,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	netdev->irq = adapter->msix_entries[0].vector;
 
-	netxen_napi_add(adapter, netdev);
-
-	err = netxen_receive_peg_ready(adapter);
-	if (err)
+	if (netxen_napi_add(adapter, netdev))
 		goto err_out_disable_msi;
 
 	init_timer(&adapter->watchdog_timer);
@@ -1113,18 +1151,18 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
 		netxen_nic_detach(adapter);
-
-		if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-			netxen_p3_free_mac_list(adapter);
 	}
 
 	if (adapter->portnum == 0)
 		netxen_free_adapter_offload(adapter);
 
 	netxen_teardown_intr(adapter);
+	netxen_free_sds_rings(&adapter->recv_ctx);
 
 	netxen_cleanup_pci_map(adapter);
 
+	netxen_release_firmware(adapter);
+
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
@@ -1176,7 +1214,7 @@ netxen_nic_resume(struct pci_dev *pdev)
 
 	adapter->curr_window = 255;
 
-	err = netxen_start_firmware(adapter);
+	err = netxen_start_firmware(adapter, 0);
 	if (err) {
 		dev_err(&pdev->dev, "failed to start firmware\n");
 		return err;
@@ -1315,7 +1353,7 @@ static int
 netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
-	struct netxen_hardware_context *hw = &adapter->ahw;
+	struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
 	unsigned int first_seg_len = skb->len - skb->data_len;
 	struct netxen_cmd_buffer *pbuf;
 	struct netxen_skb_frag *buffrag;
@@ -1326,28 +1364,26 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	u32 producer, consumer;
 	int frag_count, no_of_desc;
-	u32 num_txd = adapter->num_txd;
+	u32 num_txd = tx_ring->num_desc;
 	bool is_tso = false;
 
 	frag_count = skb_shinfo(skb)->nr_frags + 1;
 
-	/* There 4 fragments per descriptor */
+	/* 4 fragments per cmd des */
 	no_of_desc = (frag_count + 3) >> 2;
 
-	producer = adapter->cmd_producer;
+	producer = tx_ring->producer;
 	smp_mb();
-	consumer = adapter->last_cmd_consumer;
-	if ((no_of_desc+2) > find_diff_among(producer, consumer, num_txd)) {
+	consumer = tx_ring->sw_consumer;
+	if ((no_of_desc+2) >= find_diff_among(producer, consumer, num_txd)) {
 		netif_stop_queue(netdev);
 		smp_mb();
 		return NETDEV_TX_BUSY;
 	}
 
-	/* Copy the descriptors into the hardware    */
-	hwdesc = &hw->cmd_desc_head[producer];
+	hwdesc = &tx_ring->desc_head[producer];
 	netxen_clear_cmddesc((u64 *)hwdesc);
-	/* Take skb->data itself */
-	pbuf = &adapter->cmd_buf_arr[producer];
+	pbuf = &tx_ring->cmd_buf_arr[producer];
 
 	is_tso = netxen_tso_check(netdev, hwdesc, skb);
 
@@ -1376,9 +1412,9 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		if ((i & 0x3) == 0) {
 			k = 0;
 			producer = get_next_index(producer, num_txd);
-			hwdesc = &hw->cmd_desc_head[producer];
+			hwdesc = &tx_ring->desc_head[producer];
 			netxen_clear_cmddesc((u64 *)hwdesc);
-			pbuf = &adapter->cmd_buf_arr[producer];
+			pbuf = &tx_ring->cmd_buf_arr[producer];
 			pbuf->skb = NULL;
 		}
 		frag = &skb_shinfo(skb)->frags[i - 1];
@@ -1430,8 +1466,8 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 			more_hdr = 0;
 		}
 		/* copy the MAC/IP/TCP headers to the cmd descriptor list */
-		hwdesc = &hw->cmd_desc_head[producer];
-		pbuf = &adapter->cmd_buf_arr[producer];
+		hwdesc = &tx_ring->desc_head[producer];
+		pbuf = &tx_ring->cmd_buf_arr[producer];
 		pbuf->skb = NULL;
 
 		/* copy the first 64 bytes */
@@ -1440,8 +1476,8 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		producer = get_next_index(producer, num_txd);
 
 		if (more_hdr) {
-			hwdesc = &hw->cmd_desc_head[producer];
-			pbuf = &adapter->cmd_buf_arr[producer];
+			hwdesc = &tx_ring->desc_head[producer];
+			pbuf = &tx_ring->cmd_buf_arr[producer];
 			pbuf->skb = NULL;
 			/* copy the next 64 bytes - should be enough except
 			 * for pathological case
@@ -1454,13 +1490,12 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		}
 	}
 
-	adapter->cmd_producer = producer;
+	tx_ring->producer = producer;
 	adapter->stats.txbytes += skb->len;
 
-	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
+	netxen_nic_update_cmd_producer(adapter, tx_ring, producer);
 
 	adapter->stats.xmitcalled++;
-	netdev->trans_start = jiffies;
 
 	return NETDEV_TX_OK;
 
@@ -1476,7 +1511,7 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 	uint32_t temp, temp_state, temp_val;
 	int rv = 0;
 
-	temp = adapter->pci_read_normalize(adapter, CRB_TEMP_STATE);
+	temp = NXRD32(adapter, CRB_TEMP_STATE);
 
 	temp_state = nx_get_temp_state(temp);
 	temp_val = nx_get_temp_val(temp);
@@ -1510,26 +1545,9 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 	return rv;
 }
 
-static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
+void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup)
 {
 	struct net_device *netdev = adapter->netdev;
-	u32 val, port, linkup;
-
-	port = adapter->physical_port;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE_P3);
-		val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
-		linkup = (val == XG_LINK_UP_P3);
-	} else {
-		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
-		if (adapter->ahw.port_type == NETXEN_NIC_GBE)
-			linkup = (val >> port) & 1;
-		else {
-			val = (val >> port*8) & 0xff;
-			linkup = (val == XG_LINK_UP);
-		}
-	}
 
 	if (adapter->ahw.linkup && !linkup) {
 		printk(KERN_INFO "%s: %s NIC Link is down\n",
@@ -1540,7 +1558,9 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 			netif_stop_queue(netdev);
 		}
 
-		netxen_nic_set_link_parameters(adapter);
+		if (!adapter->has_link_events)
+			netxen_nic_set_link_parameters(adapter);
+
 	} else if (!adapter->ahw.linkup && linkup) {
 		printk(KERN_INFO "%s: %s NIC Link is up\n",
 		       netxen_nic_driver_name, netdev->name);
@@ -1550,8 +1570,32 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 			netif_wake_queue(netdev);
 		}
 
-		netxen_nic_set_link_parameters(adapter);
+		if (!adapter->has_link_events)
+			netxen_nic_set_link_parameters(adapter);
+	}
+}
+
+static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
+{
+	u32 val, port, linkup;
+
+	port = adapter->physical_port;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		val = NXRD32(adapter, CRB_XG_STATE_P3);
+		val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+		linkup = (val == XG_LINK_UP_P3);
+	} else {
+		val = NXRD32(adapter, CRB_XG_STATE);
+		if (adapter->ahw.port_type == NETXEN_NIC_GBE)
+			linkup = (val >> port) & 1;
+		else {
+			val = (val >> port*8) & 0xff;
+			linkup = (val == XG_LINK_UP);
+		}
 	}
+
+	netxen_advert_link_change(adapter, linkup);
 }
 
 static void netxen_watchdog(unsigned long v)
@@ -1569,7 +1613,8 @@ void netxen_watchdog_task(struct work_struct *work)
 	if ((adapter->portnum  == 0) && netxen_nic_check_temp(adapter))
 		return;
 
-	netxen_nic_handle_phy_intr(adapter);
+	if (!adapter->has_link_events)
+		netxen_nic_handle_phy_intr(adapter);
 
 	if (netif_running(adapter->netdev))
 		mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
@@ -1598,10 +1643,6 @@ static void netxen_tx_timeout_task(struct work_struct *work)
 	netif_wake_queue(adapter->netdev);
 }
 
-/*
- * netxen_nic_get_stats - Get System Network Statistics
- * @netdev: network interface device structure
- */
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
@@ -1609,22 +1650,11 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 
 	memset(stats, 0, sizeof(*stats));
 
-	/* total packets received   */
 	stats->rx_packets = adapter->stats.no_rcv;
-	/* total packets transmitted    */
-	stats->tx_packets = adapter->stats.xmitedframes +
-		adapter->stats.xmitfinished;
-	/* total bytes received     */
+	stats->tx_packets = adapter->stats.xmitfinished;
 	stats->rx_bytes = adapter->stats.rxbytes;
-	/* total bytes transmitted  */
 	stats->tx_bytes = adapter->stats.txbytes;
-	/* bad packets received     */
-	stats->rx_errors = adapter->stats.rcvdbadskb;
-	/* packet transmit problems */
-	stats->tx_errors = adapter->stats.nocmddescriptor;
-	/* no space in linux buffers    */
 	stats->rx_dropped = adapter->stats.rxdropped;
-	/* no space available in linux  */
 	stats->tx_dropped = adapter->stats.txdropped;
 
 	return stats;
@@ -1651,15 +1681,14 @@ static irqreturn_t netxen_intr(int irq, void *data)
 	} else {
 		unsigned long our_int = 0;
 
-		our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
+		our_int = NXRD32(adapter, CRB_INT_VECTOR);
 
 		/* not our interrupt */
 		if (!test_and_clear_bit((7 + adapter->portnum), &our_int))
 			return IRQ_NONE;
 
 		/* claim interrupt */
-		adapter->pci_write_normalize(adapter,
-				CRB_INT_VECTOR, (our_int & 0xffffffff));
+		NXWR32(adapter, CRB_INT_VECTOR, (our_int & 0xffffffff));
 	}
 
 	/* clear interrupt */
@@ -1685,7 +1714,7 @@ static irqreturn_t netxen_msi_intr(int irq, void *data)
 
 	/* clear interrupt */
 	adapter->pci_write_immediate(adapter,
-			msi_tgt_status[adapter->ahw.pci_func], 0xffffffff);
+			adapter->msi_tgt_status, 0xffffffff);
 
 	napi_schedule(&sds_ring->napi);
 	return IRQ_HANDLED;
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index d85203203d4..5941c79be72 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -43,8 +43,7 @@ static int phy_lock(struct netxen_adapter *adapter)
 	int done = 0, timeout = 0;
 
 	while (!done) {
-		done = netxen_nic_reg_read(adapter,
-				NETXEN_PCIE_REG(PCIE_SEM3_LOCK));
+		done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM3_LOCK));
 		if (done == 1)
 			break;
 		if (timeout >= phy_lock_timeout) {
@@ -59,8 +58,7 @@ static int phy_lock(struct netxen_adapter *adapter)
 		}
 	}
 
-	netxen_crb_writelit_adapter(adapter,
-			NETXEN_PHY_LOCK_ID, PHY_LOCK_DRIVER);
+	NXWR32(adapter, NETXEN_PHY_LOCK_ID, PHY_LOCK_DRIVER);
 	return 0;
 }
 
@@ -105,9 +103,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 	 * so it cannot be in reset
 	 */
 
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
-				  &mac_cfg0, 4))
-		return -EIO;
+	mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
 	if (netxen_gb_get_soft_reset(mac_cfg0)) {
 		__u32 temp;
 		temp = 0;
@@ -115,9 +111,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 		netxen_gb_rx_reset_pb(temp);
 		netxen_gb_tx_reset_mac(temp);
 		netxen_gb_rx_reset_mac(temp);
-		if (adapter->hw_write_wx(adapter,
-					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
-					   &temp, 4))
+		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
 			return -EIO;
 		restore = 1;
 	}
@@ -125,43 +119,32 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 	address = 0;
 	netxen_gb_mii_mgmt_reg_addr(address, reg);
 	netxen_gb_mii_mgmt_phy_addr(address, phy);
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
-				   &address, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
 		return -EIO;
 	command = 0;		/* turn off any prior activity */
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
-				   &command, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
 		return -EIO;
 	/* send read command */
 	netxen_gb_mii_mgmt_set_read_cycle(command);
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
-				   &command, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
 		return -EIO;
 
 	status = 0;
 	do {
-		if (adapter->hw_read_wx(adapter,
-					  NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
-					  &status, 4))
-			return -EIO;
+		status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
 		timeout++;
 	} while ((netxen_get_gb_mii_mgmt_busy(status)
 		  || netxen_get_gb_mii_mgmt_notvalid(status))
 		 && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
 
 	if (timeout < NETXEN_NIU_PHY_WAITMAX) {
-		if (adapter->hw_read_wx(adapter,
-					  NETXEN_NIU_GB_MII_MGMT_STATUS(0),
-					  readval, 4))
-			return -EIO;
+		*readval = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_STATUS(0));
 		result = 0;
 	} else
 		result = -1;
 
 	if (restore)
-		if (adapter->hw_write_wx(adapter,
-					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
-					   &mac_cfg0, 4))
+		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
 			return -EIO;
 	phy_unlock(adapter);
 	return result;
@@ -197,9 +180,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 	 * cannot be in reset
 	 */
 
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
-				  &mac_cfg0, 4))
-		return -EIO;
+	mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
 	if (netxen_gb_get_soft_reset(mac_cfg0)) {
 		__u32 temp;
 		temp = 0;
@@ -208,35 +189,27 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 		netxen_gb_tx_reset_mac(temp);
 		netxen_gb_rx_reset_mac(temp);
 
-		if (adapter->hw_write_wx(adapter,
-					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
-					   &temp, 4))
+		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
 			return -EIO;
 		restore = 1;
 	}
 
 	command = 0;		/* turn off any prior activity */
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
-				   &command, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
 		return -EIO;
 
 	address = 0;
 	netxen_gb_mii_mgmt_reg_addr(address, reg);
 	netxen_gb_mii_mgmt_phy_addr(address, phy);
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
-				   &address, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
 		return -EIO;
 
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0),
-				   &val, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0), val))
 		return -EIO;
 
 	status = 0;
 	do {
-		if (adapter->hw_read_wx(adapter,
-					  NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
-					  &status, 4))
-			return -EIO;
+		status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
 		timeout++;
 	} while ((netxen_get_gb_mii_mgmt_busy(status))
 		 && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
@@ -248,9 +221,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 
 	/* restore the state of port 0 MAC in case we tampered with it */
 	if (restore)
-		if (adapter->hw_write_wx(adapter,
-					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
-					   &mac_cfg0, 4))
+		if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
 			return -EIO;
 
 	return result;
@@ -258,7 +229,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 
 int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter)
 {
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_INT_MASK, 0x3f);
+	NXWR32(adapter, NETXEN_NIU_INT_MASK, 0x3f);
 	return 0;
 }
 
@@ -281,7 +252,7 @@ int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter)
 
 int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter)
 {
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_INT_MASK, 0x7f);
+	NXWR32(adapter, NETXEN_NIU_INT_MASK, 0x7f);
 	return 0;
 }
 
@@ -315,36 +286,27 @@ static int netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter)
 static void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter,
 					int port, long enable)
 {
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				    0x80000000);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				    0x0000f0025);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port),
-				    0xf1ff);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB0_GMII_MODE + (port << 3), 0);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB0_MII_MODE + (port << 3), 1);
-	netxen_crb_writelit_adapter(adapter,
-				    (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
+	NXWR32(adapter, NETXEN_NIU_MODE, 0x2);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x80000000);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x0000f0025);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), 0xf1ff);
+	NXWR32(adapter, NETXEN_NIU_GB0_GMII_MODE + (port << 3), 0);
+	NXWR32(adapter, NETXEN_NIU_GB0_MII_MODE + (port << 3), 1);
+	NXWR32(adapter, (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
+	NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
 
 	if (enable) {
 		/*
 		 * Do NOT enable flow control until a suitable solution for
 		 *  shutting down pause frames is found.
 		 */
-		netxen_crb_writelit_adapter(adapter,
-					    NETXEN_NIU_GB_MAC_CONFIG_0(port),
-					    0x5);
+		NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x5);
 	}
 
 	if (netxen_niu_gbe_enable_phy_interrupts(adapter))
-		printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n");
+		printk(KERN_ERR "ERROR enabling PHY interrupts\n");
 	if (netxen_niu_gbe_clear_phy_interrupts(adapter))
-		printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n");
+		printk(KERN_ERR "ERROR clearing PHY interrupts\n");
 }
 
 /*
@@ -353,36 +315,27 @@ static void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter,
 static void netxen_niu_gbe_set_gmii_mode(struct netxen_adapter *adapter,
 					 int port, long enable)
 {
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				    0x80000000);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				    0x0000f0025);
-	netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port),
-				    0xf2ff);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB0_MII_MODE + (port << 3), 0);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB0_GMII_MODE + (port << 3), 1);
-	netxen_crb_writelit_adapter(adapter,
-				    (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
-	netxen_crb_writelit_adapter(adapter,
-				    NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
+	NXWR32(adapter, NETXEN_NIU_MODE, 0x2);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x80000000);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x0000f0025);
+	NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), 0xf2ff);
+	NXWR32(adapter, NETXEN_NIU_GB0_MII_MODE + (port << 3), 0);
+	NXWR32(adapter, NETXEN_NIU_GB0_GMII_MODE + (port << 3), 1);
+	NXWR32(adapter, (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
+	NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
 
 	if (enable) {
 		/*
 		 * Do NOT enable flow control until a suitable solution for
 		 *  shutting down pause frames is found.
 		 */
-		netxen_crb_writelit_adapter(adapter,
-					    NETXEN_NIU_GB_MAC_CONFIG_0(port),
-					    0x5);
+		NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x5);
 	}
 
 	if (netxen_niu_gbe_enable_phy_interrupts(adapter))
-		printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n");
+		printk(KERN_ERR "ERROR enabling PHY interrupts\n");
 	if (netxen_niu_gbe_clear_phy_interrupts(adapter))
-		printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n");
+		printk(KERN_ERR "ERROR clearing PHY interrupts\n");
 }
 
 int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
@@ -416,25 +369,20 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
 			 * plugged in.
 			 */
 
-			netxen_crb_writelit_adapter(adapter,
-						    NETXEN_NIU_GB_MAC_CONFIG_0
-						    (port),
+			NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
 						    NETXEN_GB_MAC_SOFT_RESET);
-			netxen_crb_writelit_adapter(adapter,
-						    NETXEN_NIU_GB_MAC_CONFIG_0
-						    (port),
-						    NETXEN_GB_MAC_RESET_PROT_BLK
-						    | NETXEN_GB_MAC_ENABLE_TX_RX
-						    |
-						    NETXEN_GB_MAC_PAUSED_FRMS);
+			NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+					    NETXEN_GB_MAC_RESET_PROT_BLK |
+					    NETXEN_GB_MAC_ENABLE_TX_RX |
+					    NETXEN_GB_MAC_PAUSED_FRMS);
 			if (netxen_niu_gbe_clear_phy_interrupts(adapter))
-				printk(KERN_ERR PFX
+				printk(KERN_ERR
 				       "ERROR clearing PHY interrupts\n");
 			if (netxen_niu_gbe_enable_phy_interrupts(adapter))
-				printk(KERN_ERR PFX
+				printk(KERN_ERR
 				       "ERROR enabling PHY interrupts\n");
 			if (netxen_niu_gbe_clear_phy_interrupts(adapter))
-				printk(KERN_ERR PFX
+				printk(KERN_ERR
 				       "ERROR clearing PHY interrupts\n");
 			result = -1;
 		}
@@ -447,88 +395,10 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
 int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
 {
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		netxen_crb_writelit_adapter(adapter,
-			NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
-		netxen_crb_writelit_adapter(adapter,
-			NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
-	}
-
-	return 0;
-}
-
-/*
- * Return the current station MAC address.
- * Note that the passed-in value must already be in network byte order.
- */
-static int netxen_niu_macaddr_get(struct netxen_adapter *adapter,
-				  netxen_ethernet_macaddr_t * addr)
-{
-	u32 stationhigh;
-	u32 stationlow;
-	int phy = adapter->physical_port;
-	u8 val[8];
-
-	if (addr == NULL)
-		return -EINVAL;
-	if ((phy < 0) || (phy > 3))
-		return -EINVAL;
-
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy),
-				  &stationhigh, 4))
-		return -EIO;
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy),
-				  &stationlow, 4))
-		return -EIO;
-	((__le32 *)val)[1] = cpu_to_le32(stationhigh);
-	((__le32 *)val)[0] = cpu_to_le32(stationlow);
-
-	memcpy(addr, val + 2, 6);
-
-	return 0;
-}
-
-/*
- * Set the station MAC address.
- * Note that the passed-in value must already be in network byte order.
- */
-int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
-			   netxen_ethernet_macaddr_t addr)
-{
-	u8 temp[4];
-	u32 val;
-	int phy = adapter->physical_port;
-	unsigned char mac_addr[6];
-	int i;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		return 0;
-
-	for (i = 0; i < 10; i++) {
-		temp[0] = temp[1] = 0;
-		memcpy(temp + 2, addr, 2);
-		val = le32_to_cpu(*(__le32 *)temp);
-		if (adapter->hw_write_wx(adapter,
-				NETXEN_NIU_GB_STATION_ADDR_1(phy), &val, 4))
-			return -EIO;
-
-		memcpy(temp, ((u8 *) addr) + 2, sizeof(__le32));
-		val = le32_to_cpu(*(__le32 *)temp);
-		if (adapter->hw_write_wx(adapter,
-				NETXEN_NIU_GB_STATION_ADDR_0(phy), &val, 4))
-			return -2;
-
-		netxen_niu_macaddr_get(adapter,
-				       (netxen_ethernet_macaddr_t *) mac_addr);
-		if (memcmp(mac_addr, addr, 6) == 0)
-			break;
+		NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
+		NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
 	}
 
-	if (i == 10) {
-		printk(KERN_ERR "%s: cannot set Mac addr for %s\n",
-		       netxen_nic_driver_name, adapter->netdev->name);
-		printk(KERN_ERR "MAC address set: %pM.\n", addr);
-		printk(KERN_ERR "MAC address get: %pM.\n", mac_addr);
-	}
 	return 0;
 }
 
@@ -545,8 +415,7 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
 		return -EINVAL;
 	mac_cfg0 = 0;
 	netxen_gb_soft_reset(mac_cfg0);
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
-				   &mac_cfg0, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), mac_cfg0))
 		return -EIO;
 	return 0;
 }
@@ -564,8 +433,8 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 		return -EINVAL;
 
 	mac_cfg = 0;
-	if (adapter->hw_write_wx(adapter,
-		NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), &mac_cfg, 4))
+	if (NXWR32(adapter,
+			NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg))
 		return -EIO;
 	return 0;
 }
@@ -581,9 +450,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 		return -EINVAL;
 
 	/* save previous contents */
-	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
-				  &reg, 4))
-		return -EIO;
+	reg = NXRD32(adapter, NETXEN_NIU_GB_DROP_WRONGADDR);
 	if (mode == NETXEN_NIU_PROMISC_MODE) {
 		switch (port) {
 		case 0:
@@ -619,67 +486,11 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 			return -EIO;
 		}
 	}
-	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
-				   &reg, 4))
+	if (NXWR32(adapter, NETXEN_NIU_GB_DROP_WRONGADDR, reg))
 		return -EIO;
 	return 0;
 }
 
-/*
- * Set the MAC address for an XG port
- * Note that the passed-in value must already be in network byte order.
- */
-int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
-			      netxen_ethernet_macaddr_t addr)
-{
-	int phy = adapter->physical_port;
-	u8 temp[4];
-	u32 val;
-
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
-		return 0;
-
-	if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS))
-		return -EIO;
-
-	temp[0] = temp[1] = 0;
-	switch (phy) {
-	case 0:
-	    memcpy(temp + 2, addr, 2);
-	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
-				&val, 4))
-		return -EIO;
-
-	    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
-	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
-				&val, 4))
-		return -EIO;
-	    break;
-
-	case 1:
-	    memcpy(temp + 2, addr, 2);
-	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_1,
-				&val, 4))
-		return -EIO;
-
-	    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
-	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_HI,
-				&val, 4))
-		return -EIO;
-	    break;
-
-	default:
-	    printk(KERN_ERR "Unknown port %d\n", phy);
-	    break;
-	}
-
-	return 0;
-}
-
 int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 		u32 mode)
 {
@@ -689,9 +500,7 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
-	if (adapter->hw_read_wx(adapter,
-		NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), &reg, 4))
-			return -EIO;
+	reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
 	if (mode == NETXEN_NIU_PROMISC_MODE)
 		reg = (reg | 0x2000UL);
 	else
@@ -702,8 +511,40 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 	else
 		reg = (reg & ~0x1000UL);
 
-	netxen_crb_writelit_adapter(adapter,
-		NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+
+	return 0;
+}
+
+int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
+{
+	u32 mac_hi, mac_lo;
+	u32 reg_hi, reg_lo;
+
+	u8 phy = adapter->physical_port;
+	u8 phy_count = (adapter->ahw.port_type == NETXEN_NIC_XGBE) ?
+		NETXEN_NIU_MAX_XG_PORTS : NETXEN_NIU_MAX_GBE_PORTS;
+
+	if (phy >= phy_count)
+		return -EINVAL;
+
+	mac_lo = ((u32)addr[0] << 16) | ((u32)addr[1] << 24);
+	mac_hi = addr[2] | ((u32)addr[3] << 8) |
+		((u32)addr[4] << 16) | ((u32)addr[5] << 24);
+
+	if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
+		reg_lo = NETXEN_NIU_XGE_STATION_ADDR_0_1 + (0x10000 * phy);
+		reg_hi = NETXEN_NIU_XGE_STATION_ADDR_0_HI + (0x10000 * phy);
+	} else {
+		reg_lo = NETXEN_NIU_GB_STATION_ADDR_1(phy);
+		reg_hi = NETXEN_NIU_GB_STATION_ADDR_0(phy);
+	}
+
+	/* write twice to flush */
+	if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
+		return -EIO;
+	if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
+		return -EIO;
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index 50183335e43..b73a62ca74f 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -36,23 +36,25 @@
  */
 #define NIC_CRB_BASE               NETXEN_CAM_RAM(0x200)
 #define NETXEN_NIC_REG(X)             (NIC_CRB_BASE+(X))
+#define NIC_CRB_BASE_2             NETXEN_CAM_RAM(0x700)
+#define NETXEN_NIC_REG_2(X)         (NIC_CRB_BASE_2+(X))
 
 #define CRB_PHAN_CNTRL_LO_OFFSET    NETXEN_NIC_REG(0x00)
 #define CRB_PHAN_CNTRL_HI_OFFSET    NETXEN_NIC_REG(0x04)
 #define CRB_CMD_PRODUCER_OFFSET     NETXEN_NIC_REG(0x08)
 #define CRB_CMD_CONSUMER_OFFSET     NETXEN_NIC_REG(0x0c)
-#define CRB_PAUSE_ADDR_LO           NETXEN_NIC_REG(0x10)	/* C0 EPG BUG  */
+#define CRB_PAUSE_ADDR_LO           NETXEN_NIC_REG(0x10)
 #define CRB_PAUSE_ADDR_HI           NETXEN_NIC_REG(0x14)
 #define NX_CDRP_CRB_OFFSET          NETXEN_NIC_REG(0x18)
 #define NX_ARG1_CRB_OFFSET          NETXEN_NIC_REG(0x1c)
 #define NX_ARG2_CRB_OFFSET          NETXEN_NIC_REG(0x20)
 #define NX_ARG3_CRB_OFFSET          NETXEN_NIC_REG(0x24)
 #define NX_SIGN_CRB_OFFSET          NETXEN_NIC_REG(0x28)
-#define CRB_CMD_INTR_LOOP           NETXEN_NIC_REG(0x20)	/* 4 regs for perf */
+#define CRB_CMD_INTR_LOOP           NETXEN_NIC_REG(0x20)
 #define CRB_CMD_DMA_LOOP            NETXEN_NIC_REG(0x24)
 #define CRB_RCV_INTR_LOOP           NETXEN_NIC_REG(0x28)
 #define CRB_RCV_DMA_LOOP            NETXEN_NIC_REG(0x2c)
-#define CRB_ENABLE_TX_INTR          NETXEN_NIC_REG(0x30)	/* phantom init status */
+#define CRB_ENABLE_TX_INTR          NETXEN_NIC_REG(0x30)
 #define CRB_MMAP_ADDR_3             NETXEN_NIC_REG(0x34)
 #define CRB_CMDPEG_CMDRING          NETXEN_NIC_REG(0x38)
 #define CRB_HOST_DUMMY_BUF_ADDR_HI  NETXEN_NIC_REG(0x3c)
@@ -65,7 +67,7 @@
 #define CRB_MMAP_SIZE_1             NETXEN_NIC_REG(0x58)
 #define CRB_MMAP_SIZE_2             NETXEN_NIC_REG(0x5c)
 #define CRB_MMAP_SIZE_3             NETXEN_NIC_REG(0x60)
-#define CRB_GLOBAL_INT_COAL         NETXEN_NIC_REG(0x64)	/* interrupt coalescing */
+#define CRB_GLOBAL_INT_COAL         NETXEN_NIC_REG(0x64)
 #define CRB_INT_COAL_MODE           NETXEN_NIC_REG(0x68)
 #define CRB_MAX_RCV_BUFS            NETXEN_NIC_REG(0x6c)
 #define CRB_TX_INT_THRESHOLD        NETXEN_NIC_REG(0x70)
@@ -83,13 +85,13 @@
 #define CRB_AGENT_TX_TYPE           NETXEN_NIC_REG(0xa0)
 #define CRB_AGENT_TX_ADDR           NETXEN_NIC_REG(0xa4)
 #define CRB_AGENT_TX_MSS            NETXEN_NIC_REG(0xa8)
-#define CRB_TX_STATE                NETXEN_NIC_REG(0xac)	/* Debug -performance */
+#define CRB_TX_STATE                NETXEN_NIC_REG(0xac)
 #define CRB_TX_COUNT                NETXEN_NIC_REG(0xb0)
 #define CRB_RX_STATE                NETXEN_NIC_REG(0xb4)
 #define CRB_RX_PERF_DEBUG_1         NETXEN_NIC_REG(0xb8)
-#define CRB_RX_LRO_CONTROL          NETXEN_NIC_REG(0xbc)	/* LRO On/OFF */
+#define CRB_RX_LRO_CONTROL          NETXEN_NIC_REG(0xbc)
 #define CRB_RX_LRO_START_NUM        NETXEN_NIC_REG(0xc0)
-#define CRB_MPORT_MODE              NETXEN_NIC_REG(0xc4)	/* Multiport Mode */
+#define CRB_MPORT_MODE              NETXEN_NIC_REG(0xc4)
 #define CRB_CMD_RING_SIZE           NETXEN_NIC_REG(0xc8)
 #define CRB_DMA_SHIFT               NETXEN_NIC_REG(0xcc)
 #define CRB_INT_VECTOR              NETXEN_NIC_REG(0xd4)
@@ -109,8 +111,6 @@
 #define CRB_CMD_CONSUMER_OFFSET_1   NETXEN_NIC_REG(0x1b0)
 #define CRB_CMD_PRODUCER_OFFSET_2   NETXEN_NIC_REG(0x1b8)
 #define CRB_CMD_CONSUMER_OFFSET_2   NETXEN_NIC_REG(0x1bc)
-
-// 1c0 to 1cc used for signature reg
 #define CRB_CMD_PRODUCER_OFFSET_3   NETXEN_NIC_REG(0x1d0)
 #define CRB_CMD_CONSUMER_OFFSET_3   NETXEN_NIC_REG(0x1d4)
 #define CRB_TEMP_STATE              NETXEN_NIC_REG(0x1b4)
@@ -120,13 +120,13 @@
 #define CRB_V2P_2		    NETXEN_NIC_REG(0x298)
 #define CRB_V2P_3		    NETXEN_NIC_REG(0x29c)
 #define CRB_V2P(port)		    (CRB_V2P_0+((port)*4))
-#define CRB_DRIVER_VERSION	    NETXEN_NIC_REG(0x2a0)
-/* sw int status/mask registers */
+#define CRB_DRIVER_VERSION	   NETXEN_NIC_REG(0x2a0)
 #define CRB_SW_INT_MASK_0	   NETXEN_NIC_REG(0x1d8)
 #define CRB_SW_INT_MASK_1	   NETXEN_NIC_REG(0x1e0)
 #define CRB_SW_INT_MASK_2	   NETXEN_NIC_REG(0x1e4)
 #define CRB_SW_INT_MASK_3	   NETXEN_NIC_REG(0x1e8)
 
+#define CRB_FW_CAPABILITIES_1      NETXEN_CAM_RAM(0x128)
 #define CRB_MAC_BLOCK_START        NETXEN_CAM_RAM(0x1c0)
 
 /*
@@ -136,7 +136,7 @@
 #define CRB_NIC_CAPABILITIES_HOST	NETXEN_NIC_REG(0x1a8)
 #define CRB_NIC_CAPABILITIES_FW	  	NETXEN_NIC_REG(0x1dc)
 #define CRB_NIC_MSI_MODE_HOST		NETXEN_NIC_REG(0x270)
-#define CRB_NIC_MSI_MODE_FW	  		NETXEN_NIC_REG(0x274)
+#define CRB_NIC_MSI_MODE_FW	  	NETXEN_NIC_REG(0x274)
 
 #define INTR_SCHEME_PERPORT	      	0x1
 #define MSI_MODE_MULTIFUNC	      	0x1
@@ -162,7 +162,8 @@
 
 struct netxen_recv_crb {
 	u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
-	u32 crb_sts_consumer;
+	u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
+	u32 sw_int_mask[NUM_STS_DESC_RINGS];
 };
 
 /*
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index 6474f02bf78..1f10ed603e2 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -1165,7 +1165,7 @@ static int ni65_send_packet(struct sk_buff *skb, struct net_device *dev)
 
 	if (test_and_set_bit(0, (void*)&p->lock)) {
 		printk(KERN_ERR "%s: Queue was locked.\n", dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	{
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 2b1745328cf..fa61a12c5e1 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -22,6 +22,7 @@
 #include <linux/log2.h>
 #include <linux/jiffies.h>
 #include <linux/crc32.h>
+#include <linux/list.h>
 
 #include <linux/io.h>
 
@@ -1317,7 +1318,7 @@ static int bcm8704_reset(struct niu *np)
 
 	err = mdio_read(np, np->phy_addr,
 			BCM8704_PHYXS_DEV_ADDR, MII_BMCR);
-	if (err < 0)
+	if (err < 0 || err == 0xffff)
 		return err;
 	err |= BMCR_RESET;
 	err = mdio_write(np, np->phy_addr, BCM8704_PHYXS_DEV_ADDR,
@@ -2042,7 +2043,7 @@ static int link_status_10g_bcm8706(struct niu *np, int *link_up_p)
 
 	err = mdio_read(np, np->phy_addr, BCM8704_PMA_PMD_DEV_ADDR,
 			BCM8704_PMD_RCV_SIGDET);
-	if (err < 0)
+	if (err < 0 || err == 0xffff)
 		goto out;
 	if (!(err & PMD_RCV_SIGDET_GLOBAL)) {
 		err = 0;
@@ -2083,8 +2084,6 @@ static int link_status_10g_bcm8706(struct niu *np, int *link_up_p)
 
 out:
 	*link_up_p = link_up;
-	if (np->flags & NIU_FLAGS_HOTPLUG_PHY)
-		err = 0;
 	return err;
 }
 
@@ -2220,10 +2219,17 @@ static int link_status_10g_hotplug(struct niu *np, int *link_up_p)
 		if (phy_present != phy_present_prev) {
 			/* state change */
 			if (phy_present) {
+				/* A NEM was just plugged in */
 				np->flags |= NIU_FLAGS_HOTPLUG_PHY_PRESENT;
 				if (np->phy_ops->xcvr_init)
 					err = np->phy_ops->xcvr_init(np);
 				if (err) {
+					err = mdio_read(np, np->phy_addr,
+						BCM8704_PHYXS_DEV_ADDR, MII_BMCR);
+					if (err == 0xffff) {
+						/* No mdio, back-to-back XAUI */
+						goto out;
+					}
 					/* debounce */
 					np->flags &= ~NIU_FLAGS_HOTPLUG_PHY_PRESENT;
 				}
@@ -2234,13 +2240,21 @@ static int link_status_10g_hotplug(struct niu *np, int *link_up_p)
 					np->dev->name);
 			}
 		}
-		if (np->flags & NIU_FLAGS_HOTPLUG_PHY_PRESENT)
+out:
+		if (np->flags & NIU_FLAGS_HOTPLUG_PHY_PRESENT) {
 			err = link_status_10g_bcm8706(np, link_up_p);
+			if (err == 0xffff) {
+				/* No mdio, back-to-back XAUI: it is C10NEM */
+				*link_up_p = 1;
+				np->link_config.active_speed = SPEED_10000;
+				np->link_config.active_duplex = DUPLEX_FULL;
+			}
+		}
 	}
 
 	spin_unlock_irqrestore(&np->lock, flags);
 
-	return err;
+	return 0;
 }
 
 static int niu_link_status(struct niu *np, int *link_up_p)
@@ -2312,6 +2326,12 @@ static const struct niu_phy_ops phy_ops_10g_fiber_hotplug = {
 	.link_status		= link_status_10g_hotplug,
 };
 
+static const struct niu_phy_ops phy_ops_niu_10g_hotplug = {
+	.serdes_init		= serdes_init_niu_10g_fiber,
+	.xcvr_init		= xcvr_init_10g_bcm8706,
+	.link_status		= link_status_10g_hotplug,
+};
+
 static const struct niu_phy_ops phy_ops_10g_copper = {
 	.serdes_init		= serdes_init_10g,
 	.link_status		= link_status_10g, /* XXX */
@@ -2358,6 +2378,11 @@ static const struct niu_phy_template phy_template_10g_fiber_hotplug = {
 	.phy_addr_base	= 8,
 };
 
+static const struct niu_phy_template phy_template_niu_10g_hotplug = {
+	.ops		= &phy_ops_niu_10g_hotplug,
+	.phy_addr_base	= 8,
+};
+
 static const struct niu_phy_template phy_template_10g_copper = {
 	.ops		= &phy_ops_10g_copper,
 	.phy_addr_base	= 10,
@@ -2542,8 +2567,16 @@ static int niu_determine_phy_disposition(struct niu *np)
 		case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
 			/* 10G Fiber */
 		default:
-			tp = &phy_template_niu_10g_fiber;
-			phy_addr_off += np->port;
+			if (np->flags & NIU_FLAGS_HOTPLUG_PHY) {
+				tp = &phy_template_niu_10g_hotplug;
+				if (np->port == 0)
+					phy_addr_off = 8;
+				if (np->port == 1)
+					phy_addr_off = 12;
+			} else {
+				tp = &phy_template_niu_10g_fiber;
+				phy_addr_off += np->port;
+			}
 			break;
 		}
 	} else {
@@ -2630,11 +2663,11 @@ static int niu_init_link(struct niu *np)
 		msleep(200);
 	}
 	err = niu_serdes_init(np);
-	if (err)
+	if (err && !(np->flags & NIU_FLAGS_HOTPLUG_PHY))
 		return err;
 	msleep(200);
 	err = niu_xcvr_init(np);
-	if (!err)
+	if (!err || (np->flags & NIU_FLAGS_HOTPLUG_PHY))
 		niu_link_status(np, &ignore);
 	return 0;
 }
@@ -6330,6 +6363,7 @@ static void niu_set_rx_mode(struct net_device *dev)
 	struct niu *np = netdev_priv(dev);
 	int i, alt_cnt, err;
 	struct dev_addr_list *addr;
+	struct netdev_hw_addr *ha;
 	unsigned long flags;
 	u16 hash[16] = { 0, };
 
@@ -6351,9 +6385,8 @@ static void niu_set_rx_mode(struct net_device *dev)
 	if (alt_cnt) {
 		int index = 0;
 
-		for (addr = dev->uc_list; addr; addr = addr->next) {
-			err = niu_set_alt_mac(np, index,
-					      addr->da_addr);
+		list_for_each_entry(ha, &dev->uc_list, list) {
+			err = niu_set_alt_mac(np, index, ha->addr);
 			if (err)
 				printk(KERN_WARNING PFX "%s: Error %d "
 				       "adding alt mac %d\n",
@@ -6745,8 +6778,6 @@ static int niu_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			netif_tx_wake_queue(txq);
 	}
 
-	dev->trans_start = jiffies;
-
 out:
 	return NETDEV_TX_OK;
 
@@ -9346,6 +9377,11 @@ static int __devinit niu_get_of_props(struct niu *np)
 	if (model)
 		strcpy(np->vpd.model, model);
 
+	if (of_find_property(dp, "hot-swappable-phy", &prop_len)) {
+		np->flags |= (NIU_FLAGS_10G | NIU_FLAGS_FIBER |
+			NIU_FLAGS_HOTPLUG_PHY);
+	}
+
 	return 0;
 #else
 	return -EINVAL;
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index 8754e44cada..3bd0b5933d5 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3242,8 +3242,8 @@ struct niu {
 	struct niu_parent		*parent;
 
 	u32				flags;
-#define NIU_FLAGS_HOTPLUG_PHY_PRESENT	0x02000000 /* Removebale PHY detected*/
-#define NIU_FLAGS_HOTPLUG_PHY		0x01000000 /* Removebale PHY */
+#define NIU_FLAGS_HOTPLUG_PHY_PRESENT	0x02000000 /* Removeable PHY detected*/
+#define NIU_FLAGS_HOTPLUG_PHY		0x01000000 /* Removeable PHY */
 #define NIU_FLAGS_VPD_VALID		0x00800000 /* VPD has valid version */
 #define NIU_FLAGS_MSIX			0x00400000 /* MSI-X in use */
 #define NIU_FLAGS_MCAST			0x00200000 /* multicast filter enabled */
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index d531614a90b..1576ac07216 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1097,7 +1097,7 @@ again:
 	if (unlikely(dev->CFG_cache & CFG_LNKSTS)) {
 		netif_stop_queue(ndev);
 		if (unlikely(dev->CFG_cache & CFG_LNKSTS))
-			return 1;
+			return NETDEV_TX_BUSY;
 		netif_start_queue(ndev);
 	}
 
@@ -1115,7 +1115,7 @@ again:
 			netif_start_queue(ndev);
 			goto again;
 		}
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	if (free_idx == dev->tx_intr_idx) {
@@ -1204,9 +1204,7 @@ again:
 	if (stopped && (dev->tx_done_idx != tx_done_idx) && start_tx_okay(dev))
 		netif_start_queue(ndev);
 
-	/* set the transmit start time to catch transmit timeouts */
-	ndev->trans_start = jiffies;
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static void ns83820_update_stats(struct ns83820 *dev)
@@ -1626,7 +1624,7 @@ static void ns83820_tx_watch(unsigned long data)
 		);
 #endif
 
-	if (time_after(jiffies, ndev->trans_start + 1*HZ) &&
+	if (time_after(jiffies, dev_trans_start(ndev) + 1*HZ) &&
 	    dev->tx_done_idx != dev->tx_free_idx) {
 		printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n",
 			ndev->name,
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 5eeb5a87b73..c254a7f5b9f 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -24,6 +24,7 @@
 #include <linux/dmaengine.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
+#include <linux/of_mdio.h>
 #include <linux/etherdevice.h>
 #include <asm/dma-mapping.h>
 #include <linux/in.h>
@@ -1086,34 +1087,17 @@ static int pasemi_mac_phy_init(struct net_device *dev)
 	struct pasemi_mac *mac = netdev_priv(dev);
 	struct device_node *dn, *phy_dn;
 	struct phy_device *phydev;
-	unsigned int phy_id;
-	const phandle *ph;
-	const unsigned int *prop;
-	struct resource r;
-	int ret;
 
 	dn = pci_device_to_OF_node(mac->pdev);
-	ph = of_get_property(dn, "phy-handle", NULL);
-	if (!ph)
-		return -ENODEV;
-	phy_dn = of_find_node_by_phandle(*ph);
-
-	prop = of_get_property(phy_dn, "reg", NULL);
-	ret = of_address_to_resource(phy_dn->parent, 0, &r);
-	if (ret)
-		goto err;
-
-	phy_id = *prop;
-	snprintf(mac->phy_id, sizeof(mac->phy_id), "%x:%02x",
-		 (int)r.start, phy_id);
-
+	phy_dn = of_parse_phandle(dn, "phy-handle", 0);
 	of_node_put(phy_dn);
 
 	mac->link = 0;
 	mac->speed = 0;
 	mac->duplex = -1;
 
-	phydev = phy_connect(dev, mac->phy_id, &pasemi_adjust_link, 0, PHY_INTERFACE_MODE_SGMII);
+	phydev = of_phy_connect(dev, phy_dn, &pasemi_adjust_link, 0,
+				PHY_INTERFACE_MODE_SGMII);
 
 	if (IS_ERR(phydev)) {
 		printk(KERN_ERR "%s: Could not attach to phy\n", dev->name);
@@ -1123,10 +1107,6 @@ static int pasemi_mac_phy_init(struct net_device *dev)
 	mac->phydev = phydev;
 
 	return 0;
-
-err:
-	of_node_put(phy_dn);
-	return -ENODEV;
 }
 
 
@@ -1735,12 +1715,25 @@ out:
 	return ret;
 }
 
+static const struct net_device_ops pasemi_netdev_ops = {
+	.ndo_open		= pasemi_mac_open,
+	.ndo_stop		= pasemi_mac_close,
+	.ndo_start_xmit		= pasemi_mac_start_tx,
+	.ndo_set_multicast_list	= pasemi_mac_set_rx_mode,
+	.ndo_set_mac_address	= pasemi_mac_set_mac_addr,
+	.ndo_change_mtu		= pasemi_mac_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= pasemi_mac_netpoll,
+#endif
+};
+
 static int __devinit
 pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *dev;
 	struct pasemi_mac *mac;
-	int err;
+	int err, ret;
 
 	err = pci_enable_device(pdev);
 	if (err)
@@ -1798,12 +1791,13 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	memcpy(dev->dev_addr, mac->mac_addr, sizeof(mac->mac_addr));
 
-	mac->dma_if = mac_to_intf(mac);
-	if (mac->dma_if < 0) {
+	ret = mac_to_intf(mac);
+	if (ret < 0) {
 		dev_err(&mac->pdev->dev, "Can't map DMA interface\n");
 		err = -ENODEV;
 		goto out;
 	}
+	mac->dma_if = ret;
 
 	switch (pdev->device) {
 	case 0xa005:
@@ -1817,19 +1811,11 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out;
 	}
 
-	dev->open = pasemi_mac_open;
-	dev->stop = pasemi_mac_close;
-	dev->hard_start_xmit = pasemi_mac_start_tx;
-	dev->set_multicast_list = pasemi_mac_set_rx_mode;
-	dev->set_mac_address = pasemi_mac_set_mac_addr;
+	dev->netdev_ops = &pasemi_netdev_ops;
 	dev->mtu = PE_DEF_MTU;
 	/* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
 	mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = pasemi_mac_netpoll;
-#endif
 
-	dev->change_mtu = pasemi_mac_change_mtu;
 	dev->ethtool_ops = &pasemi_mac_ethtool_ops;
 
 	if (err)
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index 1a115ec60b5..e2f4efa8ad4 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h
@@ -100,7 +100,6 @@ struct pasemi_mac {
 	int	duplex;
 
 	unsigned int	msg_enable;
-	char	phy_id[BUS_ID_SIZE];
 };
 
 /* Software status descriptor (ring_info) */
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index c95fd72c3bb..8c1f6988f39 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -728,6 +728,17 @@ err_out:
 	return rc;
 }
 
+static const struct net_device_ops netdrv_netdev_ops = {
+	.ndo_open		= netdrv_open,
+	.ndo_stop		= netdrv_close,
+	.ndo_start_xmit		= netdrv_start_xmit,
+	.ndo_set_multicast_list	= netdrv_set_rx_mode,
+	.ndo_do_ioctl		= netdrv_ioctl,
+	.ndo_tx_timeout		= netdrv_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
 
 static int __devinit netdrv_init_one (struct pci_dev *pdev,
 				       const struct pci_device_id *ent)
@@ -769,13 +780,7 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
 		((u16 *) (dev->dev_addr))[i] =
 		    le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len));
 
-	/* The Rtl8139-specific entries in the device structure. */
-	dev->open = netdrv_open;
-	dev->hard_start_xmit = netdrv_start_xmit;
-	dev->stop = netdrv_close;
-	dev->set_multicast_list = netdrv_set_rx_mode;
-	dev->do_ioctl = netdrv_ioctl;
-	dev->tx_timeout = netdrv_tx_timeout;
+	dev->netdev_ops = &netdrv_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	dev->irq = pdev->irq;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 8f3872b8985..f35c609ba02 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1195,7 +1195,7 @@ static int el3_close(struct net_device *dev)
 
 static struct pcmcia_device_id tc574_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0574),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "3CCFEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, tc574_ids);
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index cdf661a6092..ec7cf5ac4f0 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -967,8 +967,8 @@ static struct pcmcia_device_id tc589_ids[] = {
 	PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77),
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589),
 	PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "3CXEM556.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 15b8fe61695..0e38d80fd25 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1130,7 +1130,7 @@ static int axnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		outb_p(ENISR_ALL, e8390_base + EN0_IMR);
 		spin_unlock_irqrestore(&ei_local->page_lock, flags);
 		dev->stats.tx_errors++;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/*
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 81e6660a433..479d5b49437 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -877,7 +877,7 @@ static int fjn_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (length > ETH_FRAME_LEN) {
 	    printk(KERN_NOTICE "%s: Attempting to send a large packet"
 		   " (%d bytes).\n", dev->name, length);
-	    return 1;
+	    return NETDEV_TX_BUSY;
 	}
 
 	DEBUG(4, "%s: Transmitting a packet of length %lu.\n",
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 48dbb35747d..37e05d3ab89 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1388,7 +1388,7 @@ static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->stats.tx_aborted_errors++;
 	printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n",
 	       dev->name);
-	return 1;
+	return NETDEV_TX_BUSY;
     }
     smc->saved_skb = skb;
 
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index a3685c0d22f..ef37d22c7e1 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1399,7 +1399,7 @@ do_start_xmit(struct sk_buff *skb, struct net_device *dev)
     DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n",
 	  dev->name, freespace, okay ? " (okay)":" (not enough)");
     if (!okay) { /* not enough space */
-	return 1;  /* upper layer may decide to requeue this packet */
+	return NETDEV_TX_BUSY;  /* upper layer may decide to requeue this packet */
     }
     /* send the packet */
     PutWord(XIRCREG_EDP, (u_short)pktlen);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 80124fac65f..1c35e1d637a 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1227,7 +1227,6 @@ static void pcnet32_rx_entry(struct net_device *dev,
 		dev->stats.rx_dropped++;
 		return;
 	}
-	skb->dev = dev;
 	if (!rx_in_place) {
 		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, pkt_len);	/* Make room */
@@ -1406,7 +1405,7 @@ static int pcnet32_poll(struct napi_struct *napi, int budget)
 
 		/* Set interrupt enable. */
 		lp->a.write_csr(ioaddr, CSR0, CSR0_INTEN);
-		mmiowb();
+
 		spin_unlock_irqrestore(&lp->lock, flags);
 	}
 	return work_done;
@@ -2598,7 +2597,7 @@ pcnet32_interrupt(int irq, void *dev_id)
 			val = lp->a.read_csr(ioaddr, CSR3);
 			val |= 0x5f00;
 			lp->a.write_csr(ioaddr, CSR3, val);
-			mmiowb();
+
 			__napi_schedule(&lp->napi);
 			break;
 		}
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 7a3ec9d39a9..dd6f54d1b49 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -243,6 +243,7 @@ static int m88e1111_config_init(struct phy_device *phydev)
 
 		temp &= ~(MII_M1111_HWCFG_MODE_MASK);
 		temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
+		temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
 
 		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 		if (err < 0)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index b754020cbe7..bd4e8d72dc0 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -113,7 +113,6 @@ int mdiobus_register(struct mii_bus *bus)
 		bus->reset(bus);
 
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
-		bus->phy_map[i] = NULL;
 		if ((bus->phy_mask & (1 << i)) == 0) {
 			struct phy_device *phydev;
 
@@ -150,6 +149,7 @@ void mdiobus_unregister(struct mii_bus *bus)
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
 		if (bus->phy_map[i])
 			device_unregister(&bus->phy_map[i]->dev);
+		bus->phy_map[i] = NULL;
 	}
 }
 EXPORT_SYMBOL(mdiobus_unregister);
@@ -188,35 +188,12 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
 	if (IS_ERR(phydev) || phydev == NULL)
 		return phydev;
 
-	/* There's a PHY at this address
-	 * We need to set:
-	 * 1) IRQ
-	 * 2) bus_id
-	 * 3) parent
-	 * 4) bus
-	 * 5) mii_bus
-	 * And, we need to register it */
-
-	phydev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL;
-
-	phydev->dev.parent = bus->parent;
-	phydev->dev.bus = &mdio_bus_type;
-	dev_set_name(&phydev->dev, PHY_ID_FMT, bus->id, addr);
-
-	phydev->bus = bus;
-
-	/* Run all of the fixups for this PHY */
-	phy_scan_fixups(phydev);
-
-	err = device_register(&phydev->dev);
+	err = phy_device_register(phydev);
 	if (err) {
-		printk(KERN_ERR "phy %d failed to register\n", addr);
 		phy_device_free(phydev);
-		phydev = NULL;
+		return NULL;
 	}
 
-	bus->phy_map[addr] = phydev;
-
 	return phydev;
 }
 EXPORT_SYMBOL(mdiobus_scan);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0a06e4fd37d..a2ece89622d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -39,20 +39,21 @@ MODULE_DESCRIPTION("PHY library");
 MODULE_AUTHOR("Andy Fleming");
 MODULE_LICENSE("GPL");
 
-static struct phy_driver genphy_driver;
-extern int mdio_bus_init(void);
-extern void mdio_bus_exit(void);
-
 void phy_device_free(struct phy_device *phydev)
 {
 	kfree(phydev);
 }
+EXPORT_SYMBOL(phy_device_free);
 
 static void phy_device_release(struct device *dev)
 {
 	phy_device_free(to_phy_device(dev));
 }
 
+static struct phy_driver genphy_driver;
+extern int mdio_bus_init(void);
+extern void mdio_bus_exit(void);
+
 static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
@@ -166,6 +167,10 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
 	dev->addr = addr;
 	dev->phy_id = phy_id;
 	dev->bus = bus;
+	dev->dev.parent = bus->parent;
+	dev->dev.bus = &mdio_bus_type;
+	dev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL;
+	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
 
 	dev->state = PHY_DOWN;
 
@@ -235,6 +240,38 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
 
 	return dev;
 }
+EXPORT_SYMBOL(get_phy_device);
+
+/**
+ * phy_device_register - Register the phy device on the MDIO bus
+ * @phy_device: phy_device structure to be added to the MDIO bus
+ */
+int phy_device_register(struct phy_device *phydev)
+{
+	int err;
+
+	/* Don't register a phy if one is already registered at this
+	 * address */
+	if (phydev->bus->phy_map[phydev->addr])
+		return -EINVAL;
+	phydev->bus->phy_map[phydev->addr] = phydev;
+
+	/* Run all of the fixups for this PHY */
+	phy_scan_fixups(phydev);
+
+	err = device_register(&phydev->dev);
+	if (err) {
+		pr_err("phy %d failed to register\n", phydev->addr);
+		goto out;
+	}
+
+	return 0;
+
+ out:
+	phydev->bus->phy_map[phydev->addr] = NULL;
+	return err;
+}
+EXPORT_SYMBOL(phy_device_register);
 
 /**
  * phy_prepare_link - prepares the PHY layer to monitor link status
@@ -255,6 +292,33 @@ void phy_prepare_link(struct phy_device *phydev,
 }
 
 /**
+ * phy_connect_direct - connect an ethernet device to a specific phy_device
+ * @dev: the network device to connect
+ * @phydev: the pointer to the phy device
+ * @handler: callback function for state change notifications
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ */
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+		       void (*handler)(struct net_device *), u32 flags,
+		       phy_interface_t interface)
+{
+	int rc;
+
+	rc = phy_attach_direct(dev, phydev, flags, interface);
+	if (rc)
+		return rc;
+
+	phy_prepare_link(phydev, handler);
+	phy_start_machine(phydev, NULL);
+	if (phydev->irq > 0)
+		phy_start_interrupts(phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_connect_direct);
+
+/**
  * phy_connect - connect an ethernet device to a PHY device
  * @dev: the network device to connect
  * @bus_id: the id string of the PHY device to connect
@@ -275,18 +339,21 @@ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
 		phy_interface_t interface)
 {
 	struct phy_device *phydev;
+	struct device *d;
+	int rc;
 
-	phydev = phy_attach(dev, bus_id, flags, interface);
-
-	if (IS_ERR(phydev))
-		return phydev;
-
-	phy_prepare_link(phydev, handler);
-
-	phy_start_machine(phydev, NULL);
+	/* Search the list of PHY devices on the mdio bus for the
+	 * PHY with the requested name */
+	d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
+	if (!d) {
+		pr_err("PHY %s not found\n", bus_id);
+		return ERR_PTR(-ENODEV);
+	}
+	phydev = to_phy_device(d);
 
-	if (phydev->irq > 0)
-		phy_start_interrupts(phydev);
+	rc = phy_connect_direct(dev, phydev, handler, flags, interface);
+	if (rc)
+		return ERR_PTR(rc);
 
 	return phydev;
 }
@@ -310,9 +377,9 @@ void phy_disconnect(struct phy_device *phydev)
 EXPORT_SYMBOL(phy_disconnect);
 
 /**
- * phy_attach - attach a network device to a particular PHY device
+ * phy_attach_direct - attach a network device to a given PHY device pointer
  * @dev: network device to attach
- * @bus_id: PHY device to attach
+ * @phydev: Pointer to phy_device to attach
  * @flags: PHY device's dev_flags
  * @interface: PHY device's interface
  *
@@ -323,22 +390,10 @@ EXPORT_SYMBOL(phy_disconnect);
  *     the attaching device, and given a callback for link status
  *     change.  The phy_device is returned to the attaching driver.
  */
-struct phy_device *phy_attach(struct net_device *dev,
-		const char *bus_id, u32 flags, phy_interface_t interface)
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+		      u32 flags, phy_interface_t interface)
 {
-	struct bus_type *bus = &mdio_bus_type;
-	struct phy_device *phydev;
-	struct device *d;
-
-	/* Search the list of PHY devices on the mdio bus for the
-	 * PHY with the requested name */
-	d = bus_find_device_by_name(bus, NULL, bus_id);
-	if (d) {
-		phydev = to_phy_device(d);
-	} else {
-		printk(KERN_ERR "%s not found\n", bus_id);
-		return ERR_PTR(-ENODEV);
-	}
+	struct device *d = &phydev->dev;
 
 	/* Assume that if there is no driver, that it doesn't
 	 * exist, and we should use the genphy driver. */
@@ -351,13 +406,12 @@ struct phy_device *phy_attach(struct net_device *dev,
 			err = device_bind_driver(d);
 
 		if (err)
-			return ERR_PTR(err);
+			return err;
 	}
 
 	if (phydev->attached_dev) {
-		printk(KERN_ERR "%s: %s already attached\n",
-				dev->name, bus_id);
-		return ERR_PTR(-EBUSY);
+		dev_err(&dev->dev, "PHY already attached\n");
+		return -EBUSY;
 	}
 
 	phydev->attached_dev = dev;
@@ -375,14 +429,49 @@ struct phy_device *phy_attach(struct net_device *dev,
 		err = phy_scan_fixups(phydev);
 
 		if (err < 0)
-			return ERR_PTR(err);
+			return err;
 
 		err = phydev->drv->config_init(phydev);
 
 		if (err < 0)
-			return ERR_PTR(err);
+			return err;
 	}
 
+	return 0;
+}
+EXPORT_SYMBOL(phy_attach_direct);
+
+/**
+ * phy_attach - attach a network device to a particular PHY device
+ * @dev: network device to attach
+ * @bus_id: Bus ID of PHY device to attach
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ *
+ * Description: Same as phy_attach_direct() except that a PHY bus_id
+ *     string is passed instead of a pointer to a struct phy_device.
+ */
+struct phy_device *phy_attach(struct net_device *dev,
+		const char *bus_id, u32 flags, phy_interface_t interface)
+{
+	struct bus_type *bus = &mdio_bus_type;
+	struct phy_device *phydev;
+	struct device *d;
+	int rc;
+
+	/* Search the list of PHY devices on the mdio bus for the
+	 * PHY with the requested name */
+	d = bus_find_device_by_name(bus, NULL, bus_id);
+	if (!d) {
+		pr_err("PHY %s not found\n", bus_id);
+		return ERR_PTR(-ENODEV);
+	}
+	phydev = to_phy_device(d);
+
+	rc = phy_attach_direct(dev, phydev, flags, interface);
+	if (rc)
+		return ERR_PTR(rc);
+
 	return phydev;
 }
 EXPORT_SYMBOL(phy_attach);
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 0be0f0b164f..7a62f781fef 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -955,12 +955,12 @@ plip_tx_packet(struct sk_buff *skb, struct net_device *dev)
 	struct plip_local *snd = &nl->snd_data;
 
 	if (netif_queue_stopped(dev))
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	/* We may need to grab the bus */
 	if (!nl->port_owner) {
 		if (parport_claim(nl->pardev))
-			return 1;
+			return NETDEV_TX_BUSY;
 		nl->port_owner = 1;
 	}
 
@@ -969,7 +969,7 @@ plip_tx_packet(struct sk_buff *skb, struct net_device *dev)
 	if (skb->len > dev->mtu + dev->hard_header_len) {
 		printk(KERN_WARNING "%s: packet too big, %d.\n", dev->name, (int)skb->len);
 		netif_start_queue (dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	if (net_debug > 2)
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 8ee91421db1..639d11bc444 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1054,6 +1054,7 @@ static void ppp_setup(struct net_device *dev)
 	dev->type = ARPHRD_PPP;
 	dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
 	dev->features |= NETIF_F_NETNS_LOCAL;
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 }
 
 /*
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 5b07dd8e5c0..e7935d09c89 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -433,8 +433,7 @@ static void pppol2tp_recv_dequeue_skb(struct pppol2tp_session *session, struct s
 		 *   to the inner packet either
 		 */
 		secpath_reset(skb);
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 
 		po = pppox_sk(session_sock);
@@ -976,7 +975,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh
 	/* Calculate UDP checksum if configured to do so */
 	if (sk_tun->sk_no_check == UDP_CSUM_NOXMIT)
 		skb->ip_summed = CHECKSUM_NONE;
-	else if (!(skb->dst->dev->features & NETIF_F_V4_CSUM)) {
+	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
 		uh->check = csum_tcpudp_magic(inet->saddr, inet->daddr,
@@ -1172,14 +1171,14 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	nf_reset(skb);
 
 	/* Get routing info from the tunnel socket */
-	dst_release(skb->dst);
-	skb->dst = dst_clone(__sk_dst_get(sk_tun));
+	skb_dst_drop(skb);
+	skb_dst_set(skb, dst_clone(__sk_dst_get(sk_tun)));
 	pppol2tp_skb_set_owner_w(skb, sk_tun);
 
 	/* Calculate UDP checksum if configured to do so */
 	if (sk_tun->sk_no_check == UDP_CSUM_NOXMIT)
 		skb->ip_summed = CHECKSUM_NONE;
-	else if (!(skb->dst->dev->features & NETIF_F_V4_CSUM)) {
+	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
 		uh->check = csum_tcpudp_magic(inet->saddr, inet->daddr,
@@ -1238,8 +1237,7 @@ static void pppol2tp_tunnel_closeall(struct pppol2tp_tunnel *tunnel)
 	struct pppol2tp_session *session;
 	struct sock *sk;
 
-	if (tunnel == NULL)
-		BUG();
+	BUG_ON(tunnel == NULL);
 
 	PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
 	       "%s: closing all sessions...\n", tunnel->name);
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 30900b30d53..2b38f39924a 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1648,7 +1648,7 @@ static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
 		result = -ENOMEM;
 		goto fail_alloc_card;
 	}
-	ps3_system_bus_set_driver_data(dev, card);
+	ps3_system_bus_set_drvdata(dev, card);
 	card->dev = dev;
 
 	/* get internal vlan info */
@@ -1749,7 +1749,7 @@ fail_alloc_irq:
 					       bus_id(card),
 					       0, 0);
 fail_status_indicator:
-	ps3_system_bus_set_driver_data(dev, NULL);
+	ps3_system_bus_set_drvdata(dev, NULL);
 	kfree(netdev_card(netdev)->unalign);
 	free_netdev(netdev);
 fail_alloc_card:
@@ -1766,7 +1766,7 @@ fail_open:
 
 static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
 {
-	struct gelic_card *card = ps3_system_bus_get_driver_data(dev);
+	struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
 	struct net_device *netdev0;
 	pr_debug("%s: called\n", __func__);
 
@@ -1803,7 +1803,7 @@ static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
 	kfree(netdev_card(netdev0)->unalign);
 	free_netdev(netdev0);
 
-	ps3_system_bus_set_driver_data(dev, NULL);
+	ps3_system_bus_set_drvdata(dev, NULL);
 
 	ps3_dma_region_free(dev->d_region);
 
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index cadc32c94c1..8a823ecc99a 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -2617,7 +2617,6 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
 			    &port_regs->CommonRegs.reqQProducerIndex,
 			    qdev->req_producer_index);
 
-	ndev->trans_start = jiffies;
 	if (netif_msg_tx_queued(qdev))
 		printk(KERN_DEBUG PFX "%s: tx queued, slot %d, len %d\n",
 		       ndev->name, qdev->req_producer_index, skb->len);
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index fcb159e4df5..156e02e8905 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -27,6 +27,8 @@
 			   "%s: " fmt, __func__, ##args);  \
        } while (0)
 
+#define WQ_ADDR_ALIGN	0x3	/* 4 byte alignment */
+
 #define QLGE_VENDOR_ID    0x1077
 #define QLGE_DEVICE_ID_8012	0x8012
 #define QLGE_DEVICE_ID_8000	0x8000
@@ -39,7 +41,18 @@
 
 #define NUM_SMALL_BUFFERS   512
 #define NUM_LARGE_BUFFERS   512
+#define DB_PAGE_SIZE 4096
+
+/* Calculate the number of (4k) pages required to
+ * contain a buffer queue of the given length.
+ */
+#define MAX_DB_PAGES_PER_BQ(x) \
+		(((x * sizeof(u64)) / DB_PAGE_SIZE) + \
+		(((x * sizeof(u64)) % DB_PAGE_SIZE) ? 1 : 0))
 
+#define RX_RING_SHADOW_SPACE	(sizeof(u64) + \
+		MAX_DB_PAGES_PER_BQ(NUM_SMALL_BUFFERS) * sizeof(u64) + \
+		MAX_DB_PAGES_PER_BQ(NUM_LARGE_BUFFERS) * sizeof(u64))
 #define SMALL_BUFFER_SIZE 256
 #define LARGE_BUFFER_SIZE	PAGE_SIZE
 #define MAX_SPLIT_SIZE 1023
@@ -50,7 +63,7 @@
 #define MAX_INTER_FRAME_WAIT 10	/* 10 usec max interframe-wait for coalescing */
 #define DFLT_INTER_FRAME_WAIT (MAX_INTER_FRAME_WAIT/2)
 #define UDELAY_COUNT 3
-#define UDELAY_DELAY 10
+#define UDELAY_DELAY 100
 
 
 #define TX_DESC_PER_IOCB 8
@@ -63,7 +76,16 @@
 #define TX_DESC_PER_OAL 0
 #endif
 
-#define DB_PAGE_SIZE 4096
+/* MPI test register definitions. This register
+ * is used for determining alternate NIC function's
+ * PCI->func number.
+ */
+enum {
+	MPI_TEST_FUNC_PORT_CFG = 0x1002,
+	MPI_TEST_NIC1_FUNC_SHIFT = 1,
+	MPI_TEST_NIC2_FUNC_SHIFT = 5,
+	MPI_TEST_NIC_FUNC_MASK = 0x00000007,
+};
 
 /*
  * Processor Address Register (PROC_ADDR) bit definitions.
@@ -1430,7 +1452,10 @@ struct ql_adapter {
 
 	/* Hardware information */
 	u32 chip_rev_id;
+	u32 fw_rev_id;
 	u32 func;		/* PCI function for this adapter */
+	u32 alt_func;		/* PCI function for alternate adapter */
+	u32 port;		/* Port number this adapter */
 
 	spinlock_t adapter_lock;
 	spinlock_t hw_lock;
@@ -1580,6 +1605,8 @@ void ql_mpi_idc_work(struct work_struct *work);
 void ql_mpi_port_cfg_work(struct work_struct *work);
 int ql_mb_get_fw_state(struct ql_adapter *qdev);
 int ql_cam_route_initialize(struct ql_adapter *qdev);
+int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
+int ql_mb_about_fw(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 913b2a5fafc..37c99fe7977 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -293,7 +293,10 @@ static void ql_get_drvinfo(struct net_device *ndev,
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	strncpy(drvinfo->driver, qlge_driver_name, 32);
 	strncpy(drvinfo->version, qlge_driver_version, 32);
-	strncpy(drvinfo->fw_version, "N/A", 32);
+	snprintf(drvinfo->fw_version, 32, "v%d.%d.%d",
+		 (qdev->fw_rev_id & 0x00ff0000) >> 16,
+		 (qdev->fw_rev_id & 0x0000ff00) >> 8,
+		 (qdev->fw_rev_id & 0x000000ff));
 	strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32);
 	drvinfo->n_stats = 0;
 	drvinfo->testinfo_len = 0;
@@ -401,6 +404,7 @@ const struct ethtool_ops qlge_ethtool_ops = {
 	.get_rx_csum = ql_get_rx_csum,
 	.set_rx_csum = ql_set_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,
+	.set_tx_csum = ethtool_op_set_tx_csum,
 	.get_sg = ethtool_op_get_sg,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = ethtool_op_get_tso,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c92ced24794..90d1f76c0e8 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -675,11 +675,12 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 	int status;
 	__le32 *p = (__le32 *)&qdev->flash;
 	u32 offset;
+	u8 mac_addr[6];
 
 	/* Get flash offset for function and adjust
 	 * for dword access.
 	 */
-	if (!qdev->func)
+	if (!qdev->port)
 		offset = FUNC0_FLASH_OFFSET / sizeof(u32);
 	else
 		offset = FUNC1_FLASH_OFFSET / sizeof(u32);
@@ -705,14 +706,26 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 		goto exit;
 	}
 
-	if (!is_valid_ether_addr(qdev->flash.flash_params_8000.mac_addr)) {
+	/* Extract either manufacturer or BOFM modified
+	 * MAC address.
+	 */
+	if (qdev->flash.flash_params_8000.data_type1 == 2)
+		memcpy(mac_addr,
+			qdev->flash.flash_params_8000.mac_addr1,
+			qdev->ndev->addr_len);
+	else
+		memcpy(mac_addr,
+			qdev->flash.flash_params_8000.mac_addr,
+			qdev->ndev->addr_len);
+
+	if (!is_valid_ether_addr(mac_addr)) {
 		QPRINTK(qdev, IFUP, ERR, "Invalid MAC address.\n");
 		status = -EINVAL;
 		goto exit;
 	}
 
 	memcpy(qdev->ndev->dev_addr,
-		qdev->flash.flash_params_8000.mac_addr,
+		mac_addr,
 		qdev->ndev->addr_len);
 
 exit:
@@ -731,7 +744,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
 	/* Second function's parameters follow the first
 	 * function's.
 	 */
-	if (qdev->func)
+	if (qdev->port)
 		offset = size;
 
 	if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
@@ -837,6 +850,13 @@ exit:
 static int ql_8000_port_initialize(struct ql_adapter *qdev)
 {
 	int status;
+	/*
+	 * Get MPI firmware version for driver banner
+	 * and ethool info.
+	 */
+	status = ql_mb_about_fw(qdev);
+	if (status)
+		goto exit;
 	status = ql_mb_get_fw_state(qdev);
 	if (status)
 		goto exit;
@@ -1518,6 +1538,22 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 		return;
 	}
 
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
+					ib_mac_rsp->flags2);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* The max framesize filter on this chip is set higher than
+	 * MTU since FCoE uses 2k frames.
+	 */
+	if (skb->len > ndev->mtu + ETH_HLEN) {
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
 	prefetch(skb->data);
 	skb->dev = ndev;
 	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
@@ -1540,7 +1576,6 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 	 * csum or frame errors.
 	 */
 	if (qdev->rx_csum &&
-		!(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -2108,7 +2143,6 @@ static int qlge_send(struct sk_buff *skb, struct net_device *ndev)
 	wmb();
 
 	ql_write_db_reg(tx_ring->prod_idx, tx_ring->prod_idx_db_reg);
-	ndev->trans_start = jiffies;
 	QPRINTK(qdev, TX_QUEUED, DEBUG, "tx queued, slot %d, len %d\n",
 		tx_ring->prod_idx, skb->len);
 
@@ -2203,7 +2237,7 @@ static int ql_alloc_tx_resources(struct ql_adapter *qdev,
 				 &tx_ring->wq_base_dma);
 
 	if ((tx_ring->wq_base == NULL)
-	    || tx_ring->wq_base_dma & (tx_ring->wq_size - 1)) {
+		|| tx_ring->wq_base_dma & WQ_ADDR_ALIGN) {
 		QPRINTK(qdev, IFUP, ERR, "tx_ring alloc failed.\n");
 		return -ENOMEM;
 	}
@@ -2518,14 +2552,16 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 {
 	struct cqicb *cqicb = &rx_ring->cqicb;
 	void *shadow_reg = qdev->rx_ring_shadow_reg_area +
-	    (rx_ring->cq_id * sizeof(u64) * 4);
+		(rx_ring->cq_id * RX_RING_SHADOW_SPACE);
 	u64 shadow_reg_dma = qdev->rx_ring_shadow_reg_dma +
-	    (rx_ring->cq_id * sizeof(u64) * 4);
+		(rx_ring->cq_id * RX_RING_SHADOW_SPACE);
 	void __iomem *doorbell_area =
 	    qdev->doorbell_area + (DB_PAGE_SIZE * (128 + rx_ring->cq_id));
 	int err = 0;
 	u16 bq_len;
 	u64 tmp;
+	__le64 *base_indirect_ptr;
+	int page_entries;
 
 	/* Set up the shadow registers for this ring. */
 	rx_ring->prod_idx_sh_reg = shadow_reg;
@@ -2534,8 +2570,8 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	shadow_reg_dma += sizeof(u64);
 	rx_ring->lbq_base_indirect = shadow_reg;
 	rx_ring->lbq_base_indirect_dma = shadow_reg_dma;
-	shadow_reg += sizeof(u64);
-	shadow_reg_dma += sizeof(u64);
+	shadow_reg += (sizeof(u64) * MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
+	shadow_reg_dma += (sizeof(u64) * MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
 	rx_ring->sbq_base_indirect = shadow_reg;
 	rx_ring->sbq_base_indirect_dma = shadow_reg_dma;
 
@@ -2572,7 +2608,14 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	if (rx_ring->lbq_len) {
 		cqicb->flags |= FLAGS_LL;	/* Load lbq values */
 		tmp = (u64)rx_ring->lbq_base_dma;;
-		*((__le64 *) rx_ring->lbq_base_indirect) = cpu_to_le64(tmp);
+		base_indirect_ptr = (__le64 *) rx_ring->lbq_base_indirect;
+		page_entries = 0;
+		do {
+			*base_indirect_ptr = cpu_to_le64(tmp);
+			tmp += DB_PAGE_SIZE;
+			base_indirect_ptr++;
+			page_entries++;
+		} while (page_entries < MAX_DB_PAGES_PER_BQ(rx_ring->lbq_len));
 		cqicb->lbq_addr =
 		    cpu_to_le64(rx_ring->lbq_base_indirect_dma);
 		bq_len = (rx_ring->lbq_buf_size == 65536) ? 0 :
@@ -2589,7 +2632,14 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	if (rx_ring->sbq_len) {
 		cqicb->flags |= FLAGS_LS;	/* Load sbq values */
 		tmp = (u64)rx_ring->sbq_base_dma;;
-		*((__le64 *) rx_ring->sbq_base_indirect) = cpu_to_le64(tmp);
+		base_indirect_ptr = (__le64 *) rx_ring->sbq_base_indirect;
+		page_entries = 0;
+		do {
+			*base_indirect_ptr = cpu_to_le64(tmp);
+			tmp += DB_PAGE_SIZE;
+			base_indirect_ptr++;
+			page_entries++;
+		} while (page_entries < MAX_DB_PAGES_PER_BQ(rx_ring->sbq_len));
 		cqicb->sbq_addr =
 		    cpu_to_le64(rx_ring->sbq_base_indirect_dma);
 		cqicb->sbq_buf_size =
@@ -3174,7 +3224,7 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 
 	if (value & RST_FO_FR) {
 		QPRINTK(qdev, IFDOWN, ERR,
-			"ETIMEOUT!!! errored out of resetting the chip!\n");
+			"ETIMEDOUT!!! errored out of resetting the chip!\n");
 		status = -ETIMEDOUT;
 	}
 
@@ -3186,9 +3236,10 @@ static void ql_display_dev_info(struct net_device *ndev)
 	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
 
 	QPRINTK(qdev, PROBE, INFO,
-		"Function #%d, NIC Roll %d, NIC Rev = %d, "
+		"Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
 		"XG Roll = %d, XG Rev = %d.\n",
 		qdev->func,
+		qdev->port,
 		qdev->chip_rev_id & 0x0000000f,
 		qdev->chip_rev_id >> 4 & 0x0000000f,
 		qdev->chip_rev_id >> 8 & 0x0000000f,
@@ -3264,7 +3315,6 @@ static int ql_adapter_up(struct ql_adapter *qdev)
 	err = ql_adapter_initialize(qdev);
 	if (err) {
 		QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n");
-		spin_unlock(&qdev->hw_lock);
 		goto err_init;
 	}
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
@@ -3361,7 +3411,6 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 	 * completion handler rx_rings.
 	 */
 	qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1;
-	netif_set_gso_max_size(qdev->ndev, 65536);
 
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		tx_ring = &qdev->tx_ring[i];
@@ -3644,12 +3693,53 @@ static struct nic_operations qla8000_nic_ops = {
 	.port_initialize	= ql_8000_port_initialize,
 };
 
+/* Find the pcie function number for the other NIC
+ * on this chip.  Since both NIC functions share a
+ * common firmware we have the lowest enabled function
+ * do any common work.  Examples would be resetting
+ * after a fatal firmware error, or doing a firmware
+ * coredump.
+ */
+static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
+{
+	int status = 0;
+	u32 temp;
+	u32 nic_func1, nic_func2;
+
+	status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
+			&temp);
+	if (status)
+		return status;
+
+	nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
+			MPI_TEST_NIC_FUNC_MASK);
+	nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
+			MPI_TEST_NIC_FUNC_MASK);
+
+	if (qdev->func == nic_func1)
+		qdev->alt_func = nic_func2;
+	else if (qdev->func == nic_func2)
+		qdev->alt_func = nic_func1;
+	else
+		status = -EIO;
+
+	return status;
+}
 
-static void ql_get_board_info(struct ql_adapter *qdev)
+static int ql_get_board_info(struct ql_adapter *qdev)
 {
+	int status;
 	qdev->func =
 	    (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
-	if (qdev->func) {
+	if (qdev->func > 3)
+		return -EIO;
+
+	status = ql_get_alt_pcie_func(qdev);
+	if (status)
+		return status;
+
+	qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
+	if (qdev->port) {
 		qdev->xg_sem_mask = SEM_XGMAC1_MASK;
 		qdev->port_link_up = STS_PL1;
 		qdev->port_init = STS_PI1;
@@ -3668,6 +3758,7 @@ static void ql_get_board_info(struct ql_adapter *qdev)
 		qdev->nic_ops = &qla8012_nic_ops;
 	else if (qdev->device_id == QLGE_DEVICE_ID_8000)
 		qdev->nic_ops = &qla8000_nic_ops;
+	return status;
 }
 
 static void ql_release_all(struct pci_dev *pdev)
@@ -3762,7 +3853,12 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 
 	qdev->ndev = ndev;
 	qdev->pdev = pdev;
-	ql_get_board_info(qdev);
+	err = ql_get_board_info(qdev);
+	if (err) {
+		dev_err(&pdev->dev, "Register access failed.\n");
+		err = -EIO;
+		goto err_out;
+	}
 	qdev->msg_enable = netif_msg_init(debug, default_msg);
 	spin_lock_init(&qdev->hw_lock);
 	spin_lock_init(&qdev->stats_lock);
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 9f81b797f10..71afbf8b9c5 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -90,14 +90,14 @@ static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
  */
 static int ql_wait_mbx_cmd_cmplt(struct ql_adapter *qdev)
 {
-	int count = 50;	/* TODO: arbitrary for now. */
+	int count = 100;
 	u32 value;
 
 	do {
 		value = ql_read32(qdev, STS);
 		if (value & STS_PI)
 			return 0;
-		udelay(UDELAY_DELAY); /* 10us */
+		mdelay(UDELAY_DELAY); /* 100ms */
 	} while (--count);
 	return -ETIMEDOUT;
 }
@@ -141,7 +141,7 @@ end:
 /* We are being asked by firmware to accept
  * a change to the port.  This is only
  * a change to max frame sizes (Tx/Rx), pause
- * paramters, or loopback mode. We wake up a worker
+ * parameters, or loopback mode. We wake up a worker
  * to handler processing this since a mailbox command
  * will need to be sent to ACK the request.
  */
@@ -371,7 +371,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	/* We are being asked by firmware to accept
 	 * a change to the port.  This is only
 	 * a change to max frame sizes (Tx/Rx), pause
-	 * paramters, or loopback mode.
+	 * parameters, or loopback mode.
 	 */
 	case AEN_IDC_REQ:
 		status = ql_idc_req_aen(qdev);
@@ -380,7 +380,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	/* Process and inbound IDC event.
 	 * This will happen when we're trying to
 	 * change tx/rx max frame size, change pause
-	 * paramters or loopback mode.
+	 * parameters or loopback mode.
 	 */
 	case AEN_IDC_CMPLT:
 	case AEN_IDC_EXT:
@@ -453,6 +453,13 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	}
 end:
 	ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+	/* Restore the original mailbox count to
+	 * what the caller asked for.  This can get
+	 * changed when a mailbox command is waiting
+	 * for a response and an AEN arrives and
+	 * is handled.
+	 * */
+	mbcp->out_count = orig_count;
 	return status;
 }
 
@@ -540,6 +547,40 @@ end:
 	return status;
 }
 
+
+/* Get MPI firmware version. This will be used for
+ * driver banner and for ethtool info.
+ * Returns zero on success.
+ */
+int ql_mb_about_fw(struct ql_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 3;
+
+	mbcp->mbox_in[0] = MB_CMD_ABOUT_FW;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed about firmware command\n");
+		status = -EIO;
+	}
+
+	/* Store the firmware version */
+	qdev->fw_rev_id = mbcp->mbox_out[1];
+
+	return status;
+}
+
 /* Get functional state for MPI firmware.
  * Returns zero on success.
  */
@@ -754,7 +795,6 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
 {
 	struct ql_adapter *qdev =
 	    container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
-	struct net_device *ndev = qdev->ndev;
 	int status;
 
 	status = ql_mb_get_port_cfg(qdev);
@@ -764,9 +804,7 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
 		goto err;
 	}
 
-	if (ndev->mtu <= 2500)
-		goto end;
-	else if (qdev->link_config & CFG_JUMBO_FRAME_SIZE &&
+	if (qdev->link_config & CFG_JUMBO_FRAME_SIZE &&
 			qdev->max_frame_size ==
 			CFG_DEFAULT_MAX_FRAME_SIZE)
 		goto end;
@@ -831,13 +869,19 @@ void ql_mpi_work(struct work_struct *work)
 	    container_of(work, struct ql_adapter, mpi_work.work);
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
+	int err = 0;
 
 	mutex_lock(&qdev->mpi_mutex);
 
 	while (ql_read32(qdev, STS) & STS_PI) {
 		memset(mbcp, 0, sizeof(struct mbox_params));
 		mbcp->out_count = 1;
-		ql_mpi_handler(qdev, mbcp);
+		/* Don't continue if an async event
+		 * did not complete properly.
+		 */
+		err = ql_mpi_handler(qdev, mbcp);
+		if (err)
+			break;
 	}
 
 	mutex_unlock(&qdev->mpi_mutex);
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 6f97b47d74a..ed63d23a645 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -49,8 +49,8 @@
 #include <asm/processor.h>
 
 #define DRV_NAME	"r6040"
-#define DRV_VERSION	"0.22"
-#define DRV_RELDATE	"25Mar2009"
+#define DRV_VERSION	"0.23"
+#define DRV_RELDATE	"05May2009"
 
 /* PHY CHIP Address */
 #define PHY1_ADDR	1	/* For MAC1 */
@@ -401,6 +401,9 @@ static void r6040_init_mac_regs(struct net_device *dev)
 	 * we may got called by r6040_tx_timeout which has left
 	 * some unsent tx buffers */
 	iowrite16(0x01, ioaddr + MTPR);
+
+	/* Check media */
+	mii_check_media(&lp->mii_if, 1, 1);
 }
 
 static void r6040_tx_timeout(struct net_device *dev)
@@ -528,6 +531,8 @@ static int r6040_phy_mode_chk(struct net_device *dev)
 			phy_dat = 0x0000;
 	}
 
+	mii_check_media(&lp->mii_if, 0, 1);
+
 	return phy_dat;
 };
 
@@ -742,6 +747,14 @@ static int r6040_up(struct net_device *dev)
 	struct r6040_private *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
 	int ret;
+	u16 val;
+
+	/* Check presence of a second PHY */
+	val = r6040_phy_read(ioaddr, lp->phy_addr, 2);
+	if (val == 0xFFFF) {
+		printk(KERN_ERR DRV_NAME " no second PHY attached\n");
+		return -EIO;
+	}
 
 	/* Initialise and alloc RX/TX buffers */
 	r6040_init_txbufs(dev);
@@ -802,7 +815,6 @@ static void r6040_timer(unsigned long data)
 		lp->phy_mode = phy_mode;
 		lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode;
 		iowrite16(lp->mcr0, ioaddr);
-		printk(KERN_INFO "Link Change %x \n", ioread16(ioaddr));
 	}
 
 	/* Timer active again */
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 3b19e0ce290..35196faa084 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -93,6 +93,7 @@ static const int multicast_filter_limit = 32;
 #define RTL_R32(reg)		((unsigned long) readl (ioaddr + (reg)))
 
 enum mac_version {
+	RTL_GIGA_MAC_NONE   = 0x00,
 	RTL_GIGA_MAC_VER_01 = 0x01, // 8169
 	RTL_GIGA_MAC_VER_02 = 0x02, // 8169S
 	RTL_GIGA_MAC_VER_03 = 0x03, // 8110S
@@ -478,7 +479,6 @@ struct rtl8169_private {
 	u16 intr_event;
 	u16 napi_event;
 	u16 intr_mask;
-	int phy_auto_nego_reg;
 	int phy_1000_ctrl_reg;
 #ifdef CONFIG_R8169_VLAN
 	struct vlan_group *vlgrp;
@@ -843,76 +843,81 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
-	int auto_nego, giga_ctrl;
-
-	auto_nego = mdio_read(ioaddr, MII_ADVERTISE);
-	auto_nego &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
-		       ADVERTISE_100HALF | ADVERTISE_100FULL);
-	giga_ctrl = mdio_read(ioaddr, MII_CTRL1000);
-	giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+	int giga_ctrl, bmcr;
 
 	if (autoneg == AUTONEG_ENABLE) {
+		int auto_nego;
+
+		auto_nego = mdio_read(ioaddr, MII_ADVERTISE);
 		auto_nego |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
 			      ADVERTISE_100HALF | ADVERTISE_100FULL);
-		giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
-	} else {
-		if (speed == SPEED_10)
-			auto_nego |= ADVERTISE_10HALF | ADVERTISE_10FULL;
-		else if (speed == SPEED_100)
-			auto_nego |= ADVERTISE_100HALF | ADVERTISE_100FULL;
-		else if (speed == SPEED_1000)
-			giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
-
-		if (duplex == DUPLEX_HALF)
-			auto_nego &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL);
-
-		if (duplex == DUPLEX_FULL)
-			auto_nego &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF);
+		auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 
-		/* This tweak comes straight from Realtek's driver. */
-		if ((speed == SPEED_100) && (duplex == DUPLEX_HALF) &&
-		    ((tp->mac_version == RTL_GIGA_MAC_VER_13) ||
-		     (tp->mac_version == RTL_GIGA_MAC_VER_16))) {
-			auto_nego = ADVERTISE_100HALF | ADVERTISE_CSMA;
-		}
-	}
+		giga_ctrl = mdio_read(ioaddr, MII_CTRL1000);
+		giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 
-	/* The 8100e/8101e/8102e do Fast Ethernet only. */
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_07) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_08) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_09) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_10) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_13) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_14) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_15) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_16)) {
-		if ((giga_ctrl & (ADVERTISE_1000FULL | ADVERTISE_1000HALF)) &&
-		    netif_msg_link(tp)) {
+		/* The 8100e/8101e/8102e do Fast Ethernet only. */
+		if ((tp->mac_version != RTL_GIGA_MAC_VER_07) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_08) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_09) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_10) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_13) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_14) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_15) &&
+		    (tp->mac_version != RTL_GIGA_MAC_VER_16)) {
+			giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
+		} else if (netif_msg_link(tp)) {
 			printk(KERN_INFO "%s: PHY does not support 1000Mbps.\n",
 			       dev->name);
 		}
-		giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
-	}
 
-	auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+
+		if ((tp->mac_version == RTL_GIGA_MAC_VER_11) ||
+		    (tp->mac_version == RTL_GIGA_MAC_VER_12) ||
+		    (tp->mac_version >= RTL_GIGA_MAC_VER_17)) {
+			/*
+			 * Wake up the PHY.
+			 * Vendor specific (0x1f) and reserved (0x0e) MII
+			 * registers.
+			 */
+			mdio_write(ioaddr, 0x1f, 0x0000);
+			mdio_write(ioaddr, 0x0e, 0x0000);
+		}
+
+		mdio_write(ioaddr, MII_ADVERTISE, auto_nego);
+		mdio_write(ioaddr, MII_CTRL1000, giga_ctrl);
+	} else {
+		giga_ctrl = 0;
+
+		if (speed == SPEED_10)
+			bmcr = 0;
+		else if (speed == SPEED_100)
+			bmcr = BMCR_SPEED100;
+		else
+			return -EINVAL;
+
+		if (duplex == DUPLEX_FULL)
+			bmcr |= BMCR_FULLDPLX;
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_11) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_12) ||
-	    (tp->mac_version >= RTL_GIGA_MAC_VER_17)) {
-		/*
-		 * Wake up the PHY.
-		 * Vendor specific (0x1f) and reserved (0x0e) MII registers.
-		 */
 		mdio_write(ioaddr, 0x1f, 0x0000);
-		mdio_write(ioaddr, 0x0e, 0x0000);
 	}
 
-	tp->phy_auto_nego_reg = auto_nego;
 	tp->phy_1000_ctrl_reg = giga_ctrl;
 
-	mdio_write(ioaddr, MII_ADVERTISE, auto_nego);
-	mdio_write(ioaddr, MII_CTRL1000, giga_ctrl);
-	mdio_write(ioaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
+	mdio_write(ioaddr, MII_BMCR, bmcr);
+
+	if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
+	    (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
+		if ((speed == SPEED_100) && (autoneg != AUTONEG_ENABLE)) {
+			mdio_write(ioaddr, 0x17, 0x2138);
+			mdio_write(ioaddr, 0x0e, 0x0260);
+		} else {
+			mdio_write(ioaddr, 0x17, 0x2108);
+			mdio_write(ioaddr, 0x0e, 0x0000);
+		}
+	}
+
 	return 0;
 }
 
@@ -1295,7 +1300,8 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 		{ 0xfc800000, 0x00800000,	RTL_GIGA_MAC_VER_02 },
 		{ 0xfc800000, 0x00000000,	RTL_GIGA_MAC_VER_01 },
 
-		{ 0x00000000, 0x00000000,	RTL_GIGA_MAC_VER_01 }	/* Catch-all */
+		/* Catch-all */
+		{ 0x00000000, 0x00000000,	RTL_GIGA_MAC_NONE   }
 	}, *p = mac_info;
 	u32 reg;
 
@@ -1303,12 +1309,6 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 	while ((reg & p->mask) != p->val)
 		p++;
 	tp->mac_version = p->mac_version;
-
-	if (p->mask == 0x00000000) {
-		struct pci_dev *pdev = tp->pci_dev;
-
-		dev_info(&pdev->dev, "unknown MAC (%08x)\n", reg);
-	}
 }
 
 static void rtl8169_print_mac_version(struct rtl8169_private *tp)
@@ -1884,6 +1884,7 @@ static const struct rtl_cfg_info {
 	u16 intr_event;
 	u16 napi_event;
 	unsigned features;
+	u8 default_ver;
 } rtl_cfg_infos [] = {
 	[RTL_CFG_0] = {
 		.hw_start	= rtl_hw_start_8169,
@@ -1892,7 +1893,8 @@ static const struct rtl_cfg_info {
 		.intr_event	= SYSErr | LinkChg | RxOverflow |
 				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
 		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
-		.features	= RTL_FEATURE_GMII
+		.features	= RTL_FEATURE_GMII,
+		.default_ver	= RTL_GIGA_MAC_VER_01,
 	},
 	[RTL_CFG_1] = {
 		.hw_start	= rtl_hw_start_8168,
@@ -1901,7 +1903,8 @@ static const struct rtl_cfg_info {
 		.intr_event	= SYSErr | LinkChg | RxOverflow |
 				  TxErr | TxOK | RxOK | RxErr,
 		.napi_event	= TxErr | TxOK | RxOK | RxOverflow,
-		.features	= RTL_FEATURE_GMII | RTL_FEATURE_MSI
+		.features	= RTL_FEATURE_GMII | RTL_FEATURE_MSI,
+		.default_ver	= RTL_GIGA_MAC_VER_11,
 	},
 	[RTL_CFG_2] = {
 		.hw_start	= rtl_hw_start_8101,
@@ -1910,7 +1913,8 @@ static const struct rtl_cfg_info {
 		.intr_event	= SYSErr | LinkChg | RxOverflow | PCSTimeout |
 				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
 		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
-		.features	= RTL_FEATURE_MSI
+		.features	= RTL_FEATURE_MSI,
+		.default_ver	= RTL_GIGA_MAC_VER_13,
 	}
 };
 
@@ -2091,6 +2095,15 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* Identify chip attached to board */
 	rtl8169_get_mac_version(tp, ioaddr);
 
+	/* Use appropriate default if unknown */
+	if (tp->mac_version == RTL_GIGA_MAC_NONE) {
+		if (netif_msg_probe(tp)) {
+			dev_notice(&pdev->dev,
+				   "unknown MAC, using family default\n");
+		}
+		tp->mac_version = cfg->default_ver;
+	}
+
 	rtl8169_print_mac_version(tp);
 
 	for (i = 0; i < ARRAY_SIZE(rtl_chip_info); i++) {
@@ -2098,13 +2111,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			break;
 	}
 	if (i == ARRAY_SIZE(rtl_chip_info)) {
-		/* Unknown chip: assume array element #0, original RTL-8169 */
-		if (netif_msg_probe(tp)) {
-			dev_printk(KERN_DEBUG, &pdev->dev,
-				"unknown chip version, assuming %s\n",
-				rtl_chip_info[0].name);
-		}
-		i = 0;
+		dev_err(&pdev->dev,
+			"driver bug, MAC version not found in rtl_chip_info\n");
+		goto err_out_msi_5;
 	}
 	tp->chipset = i;
 
@@ -3269,8 +3278,6 @@ static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
 	txd->opts1 = cpu_to_le32(status);
 
-	dev->trans_start = jiffies;
-
 	tp->cur_tx += frags + 1;
 
 	smp_wmb();
@@ -3371,7 +3378,7 @@ static void rtl8169_tx_interrupt(struct net_device *dev,
 		rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb, tp->TxDescArray + entry);
 
 		if (status & LastFrag) {
-			dev_kfree_skb_irq(tx_skb->skb);
+			dev_kfree_skb(tx_skb->skb);
 			tx_skb->skb = NULL;
 		}
 		dirty_tx++;
@@ -3802,16 +3809,13 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
 	return &dev->stats;
 }
 
-#ifdef CONFIG_PM
-
-static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
+static void rtl8169_net_suspend(struct net_device *dev)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
 
 	if (!netif_running(dev))
-		goto out_pci_suspend;
+		return;
 
 	netif_device_detach(dev);
 	netif_stop_queue(dev);
@@ -3823,24 +3827,25 @@ static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
 	rtl8169_rx_missed(dev, ioaddr);
 
 	spin_unlock_irq(&tp->lock);
+}
 
-out_pci_suspend:
-	pci_save_state(pdev);
-	pci_enable_wake(pdev, pci_choose_state(pdev, state),
-		(tp->features & RTL_FEATURE_WOL) ? 1 : 0);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+#ifdef CONFIG_PM
+
+static int rtl8169_suspend(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	rtl8169_net_suspend(dev);
 
 	return 0;
 }
 
-static int rtl8169_resume(struct pci_dev *pdev)
+static int rtl8169_resume(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct net_device *dev = pci_get_drvdata(pdev);
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	pci_enable_wake(pdev, PCI_D0, 0);
-
 	if (!netif_running(dev))
 		goto out;
 
@@ -3851,23 +3856,42 @@ out:
 	return 0;
 }
 
+static struct dev_pm_ops rtl8169_pm_ops = {
+	.suspend = rtl8169_suspend,
+	.resume = rtl8169_resume,
+	.freeze = rtl8169_suspend,
+	.thaw = rtl8169_resume,
+	.poweroff = rtl8169_suspend,
+	.restore = rtl8169_resume,
+};
+
+#define RTL8169_PM_OPS	(&rtl8169_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define RTL8169_PM_OPS	NULL
+
+#endif /* !CONFIG_PM */
+
 static void rtl_shutdown(struct pci_dev *pdev)
 {
-	rtl8169_suspend(pdev, PMSG_SUSPEND);
-}
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	rtl8169_net_suspend(dev);
 
-#endif /* CONFIG_PM */
+	if (system_state == SYSTEM_POWER_OFF) {
+		pci_wake_from_d3(pdev, true);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+}
 
 static struct pci_driver rtl8169_pci_driver = {
 	.name		= MODULENAME,
 	.id_table	= rtl8169_pci_tbl,
 	.probe		= rtl8169_init_one,
 	.remove		= __devexit_p(rtl8169_remove_one),
-#ifdef CONFIG_PM
-	.suspend	= rtl8169_suspend,
-	.resume		= rtl8169_resume,
 	.shutdown	= rtl_shutdown,
-#endif
+	.driver.pm	= RTL8169_PM_OPS,
 };
 
 static int __init rtl8169_init_module(void)
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index ec59e29807a..8702e7acdee 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -428,6 +428,15 @@ static const struct ethtool_ops rionet_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
 };
 
+static const struct net_device_ops rionet_netdev_ops = {
+	.ndo_open		= rionet_open,
+	.ndo_stop		= rionet_close,
+	.ndo_start_xmit		= rionet_start_xmit,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int rionet_setup_netdev(struct rio_mport *mport)
 {
 	int rc = 0;
@@ -466,10 +475,7 @@ static int rionet_setup_netdev(struct rio_mport *mport)
 	ndev->dev_addr[4] = device_id >> 8;
 	ndev->dev_addr[5] = device_id & 0xff;
 
-	/* Fill in the driver function table */
-	ndev->open = &rionet_open;
-	ndev->hard_start_xmit = &rionet_start_xmit;
-	ndev->stop = &rionet_close;
+	ndev->netdev_ops = &rionet_netdev_ops;
 	ndev->mtu = RIO_MAX_MSG_SIZE - 14;
 	ndev->features = NETIF_F_LLTX;
 	SET_ETHTOOL_OPS(ndev, &rionet_ethtool_ops);
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index d890829a9ac..81dbcbb910f 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1425,7 +1425,7 @@ static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (!(new_skb = dev_alloc_skb(len + 8))) {
 			dev_kfree_skb(skb);
 			netif_wake_queue(dev);
-			return -EBUSY;
+			return NETDEV_TX_OK;
 		}
 		skb_reserve(new_skb, 8);
 		skb_put(new_skb, len);
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index f8274f8941e..416669fd68c 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -271,11 +271,6 @@ struct XENA_dev_config {
 	u64 mdio_control;
 #define MDIO_MMD_INDX_ADDR(val)		vBIT(val, 0, 16)
 #define MDIO_MMD_DEV_ADDR(val)		vBIT(val, 19, 5)
-#define MDIO_MMD_PMA_DEV_ADDR		0x1
-#define MDIO_MMD_PMD_DEV_ADDR		0x1
-#define MDIO_MMD_WIS_DEV_ADDR		0x2
-#define MDIO_MMD_PCS_DEV_ADDR		0x3
-#define MDIO_MMD_PHYXS_DEV_ADDR		0x4
 #define MDIO_MMS_PRT_ADDR(val)		vBIT(val, 27, 5)
 #define MDIO_CTRL_START_TRANS(val)	vBIT(val, 56, 4)
 #define MDIO_OP(val)			vBIT(val, 60, 2)
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 1a4979f27fb..458daa06ed4 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -63,6 +63,7 @@
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/mdio.h>
 #include <linux/skbuff.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -1763,7 +1764,7 @@ static int init_nic(struct s2io_nic *nic)
 		 * by then we return error.
 		 */
 		time = 0;
-		while (TRUE) {
+		while (true) {
 			val64 = readq(&bar0->rti_command_mem);
 			if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
 				break;
@@ -2136,7 +2137,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
 
 	herc = (sp->device_type == XFRAME_II_DEVICE);
 
-	if (flag == FALSE) {
+	if (flag == false) {
 		if ((!herc && (sp->pdev->revision >= 4)) || herc) {
 			if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
 				ret = 1;
@@ -3328,9 +3329,9 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
 	struct stat_block *stat_info = sp->mac_control.stats_info;
 
 	/* Check the communication with the MDIO slave */
-	addr = 0x0000;
+	addr = MDIO_CTRL1;
 	val64 = 0x0;
-	val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+	val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 	if((val64 == 0xFFFF) || (val64 == 0x0000))
 	{
 		DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
@@ -3338,24 +3339,24 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
 		return;
 	}
 
-	/* Check for the expecte value of 2040 at PMA address 0x0000 */
-	if(val64 != 0x2040)
+	/* Check for the expected value of control reg 1 */
+	if(val64 != MDIO_CTRL1_SPEED10G)
 	{
 		DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
-		DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
-			  (unsigned long long)val64);
+		DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x%x\n",
+			  (unsigned long long)val64, MDIO_CTRL1_SPEED10G);
 		return;
 	}
 
 	/* Loading the DOM register to MDIO register */
 	addr = 0xA100;
-	s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
-	val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+	s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev);
+	val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
 	/* Reading the Alarm flags */
 	addr = 0xA070;
 	val64 = 0x0;
-	val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+	val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
 	flag = CHECKBIT(val64, 0x7);
 	type = 1;
@@ -3387,7 +3388,7 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
 	/* Reading the Warning flags */
 	addr = 0xA074;
 	val64 = 0x0;
-	val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+	val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
 
 	if(CHECKBIT(val64, 0x7))
 		stat_info->xpak_stat.warn_transceiver_temp_high++;
@@ -3586,7 +3587,7 @@ static void s2io_reset(struct s2io_nic * sp)
 		writeq(val64, &bar0->pcc_err_reg);
 	}
 
-	sp->device_enabled_once = FALSE;
+	sp->device_enabled_once = false;
 }
 
 /**
@@ -4298,7 +4299,6 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 		s2io_stop_tx_queue(sp, fifo->fifo_no);
 	}
 	mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
-	dev->trans_start = jiffies;
 	spin_unlock_irqrestore(&fifo->tx_lock, flags);
 
 	if (sp->config.intr_type == MSI_X)
@@ -5572,10 +5572,10 @@ static void s2io_ethtool_getpause_data(struct net_device *dev,
 
 	val64 = readq(&bar0->rmac_pause_cfg);
 	if (val64 & RMAC_PAUSE_GEN_ENABLE)
-		ep->tx_pause = TRUE;
+		ep->tx_pause = true;
 	if (val64 & RMAC_PAUSE_RX_ENABLE)
-		ep->rx_pause = TRUE;
-	ep->autoneg = FALSE;
+		ep->rx_pause = true;
+	ep->autoneg = false;
 }
 
 /**
@@ -6806,7 +6806,7 @@ static void s2io_set_link(struct work_struct *work)
 					val64 |= ADAPTER_LED_ON;
 					writeq(val64, &bar0->adapter_control);
 				}
-				nic->device_enabled_once = TRUE;
+				nic->device_enabled_once = true;
 			} else {
 				DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
 				DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
@@ -7754,7 +7754,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	struct s2io_nic *sp;
 	struct net_device *dev;
 	int i, j, ret;
-	int dma_flag = FALSE;
+	int dma_flag = false;
 	u32 mac_up, mac_down;
 	u64 val64 = 0, tmp64 = 0;
 	struct XENA_dev_config __iomem *bar0 = NULL;
@@ -7777,7 +7777,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 
 	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
-		dma_flag = TRUE;
+		dma_flag = true;
 		if (pci_set_consistent_dma_mask
 		    (pdev, DMA_BIT_MASK(64))) {
 			DBG_PRINT(ERR_DBG,
@@ -7818,7 +7818,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	sp->dev = dev;
 	sp->pdev = pdev;
 	sp->high_dma_flag = dma_flag;
-	sp->device_enabled_once = FALSE;
+	sp->device_enabled_once = false;
 	if (rx_ring_mode == 1)
 		sp->rxd_mode = RXD_MODE_1;
 	if (rx_ring_mode == 2)
@@ -7964,7 +7964,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 
 	dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
-	if (sp->high_dma_flag == TRUE)
+	if (sp->high_dma_flag == true)
 		dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= NETIF_F_TSO;
 	dev->features |= NETIF_F_TSO6;
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 55cb943f23f..d5c5be6c07b 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -18,15 +18,6 @@
 #define vBIT(val, loc, sz)	(((u64)val) << (64-loc-sz))
 #define INV(d)  ((d&0xff)<<24) | (((d>>8)&0xff)<<16) | (((d>>16)&0xff)<<8)| ((d>>24)&0xff)
 
-#ifndef BOOL
-#define BOOL    int
-#endif
-
-#ifndef TRUE
-#define TRUE    1
-#define FALSE   0
-#endif
-
 #undef SUCCESS
 #define SUCCESS 0
 #define FAILURE -1
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index ce7551e17ba..d8c9cf1b901 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2084,7 +2084,7 @@ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
 		netif_stop_queue(dev);
 		spin_unlock_irqrestore(&sc->sbm_lock, flags);
 
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	dev->trans_start = jiffies;
@@ -2271,6 +2271,21 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
 	return 0;
 }
 
+static const struct net_device_ops sbmac_netdev_ops = {
+	.ndo_open		= sbmac_open,
+	.ndo_stop		= sbmac_close,
+	.ndo_start_xmit		= sbmac_start_tx,
+	.ndo_set_multicast_list	= sbmac_set_rx_mode,
+	.ndo_tx_timeout		= sbmac_tx_timeout,
+	.ndo_do_ioctl		= sbmac_mii_ioctl,
+	.ndo_change_mtu		= sb1250_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= sbmac_netpoll,
+#endif
+};
+
 /**********************************************************************
  *  SBMAC_INIT(dev)
  *
@@ -2285,7 +2300,7 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
 
 static int sbmac_init(struct platform_device *pldev, long long base)
 {
-	struct net_device *dev = pldev->dev.driver_data;
+	struct net_device *dev = dev_get_drvdata(&pldev->dev);
 	int idx = pldev->id;
 	struct sbmac_softc *sc = netdev_priv(dev);
 	unsigned char *eaddr;
@@ -2327,21 +2342,11 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 
 	spin_lock_init(&(sc->sbm_lock));
 
-	dev->open               = sbmac_open;
-	dev->hard_start_xmit    = sbmac_start_tx;
-	dev->stop               = sbmac_close;
-	dev->set_multicast_list = sbmac_set_rx_mode;
-	dev->do_ioctl           = sbmac_mii_ioctl;
-	dev->tx_timeout         = sbmac_tx_timeout;
-	dev->watchdog_timeo     = TX_TIMEOUT;
+	dev->netdev_ops = &sbmac_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
 
 	netif_napi_add(dev, &sc->napi, sbmac_poll, 16);
 
-	dev->change_mtu         = sb1250_change_mtu;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = sbmac_netpoll;
-#endif
-
 	dev->irq		= UNIT_INT(idx);
 
 	/* This is needed for PASS2 for Rx H/W checksum feature */
@@ -2726,7 +2731,7 @@ static int __init sbmac_probe(struct platform_device *pldev)
 		goto out_unmap;
 	}
 
-	pldev->dev.driver_data = dev;
+	dev_set_drvdata(&pldev->dev, dev);
 	SET_NETDEV_DEV(dev, &pldev->dev);
 
 	sc = netdev_priv(dev);
@@ -2751,7 +2756,7 @@ out_out:
 
 static int __exit sbmac_remove(struct platform_device *pldev)
 {
-	struct net_device *dev = pldev->dev.driver_data;
+	struct net_device *dev = dev_get_drvdata(&pldev->dev);
 	struct sbmac_softc *sc = netdev_priv(dev);
 
 	unregister_netdev(dev);
diff --git a/drivers/net/sfc/Kconfig b/drivers/net/sfc/Kconfig
index 12a82966b57..260aafaac23 100644
--- a/drivers/net/sfc/Kconfig
+++ b/drivers/net/sfc/Kconfig
@@ -1,7 +1,7 @@
 config SFC
 	tristate "Solarflare Solarstorm SFC4000 support"
 	depends on PCI && INET
-	select MII
+	select MDIO
 	select CRC32
 	select I2C
 	select I2C_ALGOBIT
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index 5182ac5a103..4a4c74c891b 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -172,7 +172,6 @@ static const u8 sfe4002_lm87_regs[] = {
 static struct i2c_board_info sfe4002_hwmon_info = {
 	I2C_BOARD_INFO("lm87", 0x2e),
 	.platform_data	= &sfe4002_lm87_channel,
-	.irq		= -1,
 };
 
 /****************************************************************************/
@@ -247,7 +246,6 @@ static const u8 sfn4112f_lm87_regs[] = {
 static struct i2c_board_info sfn4112f_hwmon_info = {
 	I2C_BOARD_INFO("lm87", 0x2e),
 	.platform_data	= &sfn4112f_lm87_channel,
-	.irq		= -1,
 };
 
 #define SFN4112F_ACT_LED	0
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 7269a426051..343e8da1fa3 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -50,16 +50,6 @@ static struct workqueue_struct *reset_workqueue;
  *************************************************************************/
 
 /*
- * Enable large receive offload (LRO) aka soft segment reassembly (SSR)
- *
- * This sets the default for new devices.  It can be controlled later
- * using ethtool.
- */
-static int lro = true;
-module_param(lro, int, 0644);
-MODULE_PARM_DESC(lro, "Large receive offload acceleration");
-
-/*
  * Use separate channels for TX and RX events
  *
  * Set this to 1 to use separate channels for TX and RX. It allows us
@@ -894,9 +884,9 @@ static int efx_wanted_rx_queues(void)
 	int count;
 	int cpu;
 
-	if (!alloc_cpumask_var(&core_mask, GFP_KERNEL)) {
+	if (unlikely(!alloc_cpumask_var(&core_mask, GFP_KERNEL))) {
 		printk(KERN_WARNING
-		       "efx.c: allocation failure, irq balancing hobbled\n");
+		       "sfc: RSS disabled due to allocation failure\n");
 		return 1;
 	}
 
@@ -1300,10 +1290,16 @@ out_requeue:
 static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	struct mii_ioctl_data *data = if_mii(ifr);
 
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
-	return generic_mii_ioctl(&efx->mii, if_mii(ifr), cmd, NULL);
+	/* Convert phy_id from older PRTAD/DEVAD format */
+	if ((cmd == SIOCGMIIREG || cmd == SIOCSMIIREG) &&
+	    (data->phy_id & 0xfc00) == 0x0400)
+		data->phy_id ^= MDIO_PHY_ID_C45 | 0x0400;
+
+	return mdio_mii_ioctl(&efx->mdio, data, cmd);
 }
 
 /**************************************************************************
@@ -1945,7 +1941,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
 	mutex_init(&efx->mac_lock);
 	efx->mac_op = &efx_dummy_mac_operations;
 	efx->phy_op = &efx_dummy_phy_operations;
-	efx->mii.dev = net_dev;
+	efx->mdio.dev = net_dev;
 	INIT_WORK(&efx->phy_work, efx_phy_work);
 	INIT_WORK(&efx->mac_work, efx_mac_work);
 	atomic_set(&efx->netif_stop_count, 1);
@@ -2161,9 +2157,8 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
 	if (!net_dev)
 		return -ENOMEM;
 	net_dev->features |= (NETIF_F_IP_CSUM | NETIF_F_SG |
-			      NETIF_F_HIGHDMA | NETIF_F_TSO);
-	if (lro)
-		net_dev->features |= NETIF_F_GRO;
+			      NETIF_F_HIGHDMA | NETIF_F_TSO |
+			      NETIF_F_GRO);
 	/* Mask for features that also apply to VLAN devices */
 	net_dev->vlan_features |= (NETIF_F_ALL_CSUM | NETIF_F_SG |
 				   NETIF_F_HIGHDMA | NETIF_F_TSO);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 64309f4e8b1..997ea2a3d53 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -10,6 +10,7 @@
 
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
+#include <linux/mdio.h>
 #include <linux/rtnetlink.h>
 #include "net_driver.h"
 #include "workarounds.h"
@@ -345,8 +346,8 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx,
 	unsigned int n = 0, i;
 	enum efx_loopback_mode mode;
 
-	efx_fill_test(n++, strings, data, &tests->mii,
-		      "core", 0, "mii", NULL);
+	efx_fill_test(n++, strings, data, &tests->mdio,
+		      "core", 0, "mdio", NULL);
 	efx_fill_test(n++, strings, data, &tests->nvram,
 		      "core", 0, "nvram", NULL);
 	efx_fill_test(n++, strings, data, &tests->interrupt,
@@ -529,14 +530,7 @@ static int efx_ethtool_nway_reset(struct net_device *net_dev)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
 
-	if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
-		mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
-				       MDIO_MMDREG_CTRL1,
-				       __ffs(BMCR_ANRESTART), true);
-		return 0;
-	}
-
-	return -EOPNOTSUPP;
+	return mdio45_nway_restart(&efx->mdio);
 }
 
 static u32 efx_ethtool_get_link(struct net_device *net_dev)
@@ -689,7 +683,7 @@ static int efx_ethtool_set_pauseparam(struct net_device *net_dev,
 		return -EINVAL;
 	}
 
-	if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) &&
+	if (!(efx->phy_op->mmds & MDIO_DEVS_AN) &&
 	    (wanted_fc & EFX_FC_AUTO)) {
 		EFX_LOG(efx, "PHY does not support flow control "
 			"autonegotiation\n");
@@ -717,7 +711,8 @@ static int efx_ethtool_set_pauseparam(struct net_device *net_dev,
 	mutex_lock(&efx->mac_lock);
 
 	efx->wanted_fc = wanted_fc;
-	mdio_clause45_set_pause(efx);
+	if (efx->phy_op->mmds & MDIO_DEVS_AN)
+		mdio45_ethtool_spauseparam_an(&efx->mdio, pause);
 	__efx_reconfigure_port(efx);
 
 	mutex_unlock(&efx->mac_lock);
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 466a8abb005..c049364aec4 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -2063,26 +2063,6 @@ int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset)
  **************************************************************************
  */
 
-/* Use the top bit of the MII PHY id to indicate the PHY type
- * (1G/10G), with the remaining bits as the actual PHY id.
- *
- * This allows us to avoid leaking information from the mii_if_info
- * structure into other data structures.
- */
-#define FALCON_PHY_ID_ID_WIDTH  EFX_WIDTH(MD_PRT_DEV_ADR)
-#define FALCON_PHY_ID_ID_MASK   ((1 << FALCON_PHY_ID_ID_WIDTH) - 1)
-#define FALCON_PHY_ID_WIDTH     (FALCON_PHY_ID_ID_WIDTH + 1)
-#define FALCON_PHY_ID_MASK      ((1 << FALCON_PHY_ID_WIDTH) - 1)
-#define FALCON_PHY_ID_10G       (1 << (FALCON_PHY_ID_WIDTH - 1))
-
-
-/* Packing the clause 45 port and device fields into a single value */
-#define MD_PRT_ADR_COMP_LBN   (MD_PRT_ADR_LBN - MD_DEV_ADR_LBN)
-#define MD_PRT_ADR_COMP_WIDTH  MD_PRT_ADR_WIDTH
-#define MD_DEV_ADR_COMP_LBN    0
-#define MD_DEV_ADR_COMP_WIDTH  MD_DEV_ADR_WIDTH
-
-
 /* Wait for GMII access to complete */
 static int falcon_gmii_wait(struct efx_nic *efx)
 {
@@ -2108,49 +2088,29 @@ static int falcon_gmii_wait(struct efx_nic *efx)
 	return -ETIMEDOUT;
 }
 
-/* Writes a GMII register of a PHY connected to Falcon using MDIO. */
-static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
-			      int addr, int value)
+/* Write an MDIO register of a PHY connected to Falcon. */
+static int falcon_mdio_write(struct net_device *net_dev,
+			     int prtad, int devad, u16 addr, u16 value)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK;
 	efx_oword_t reg;
+	int rc;
 
-	/* The 'generic' prt/dev packing in mdio_10g.h is conveniently
-	 * chosen so that the only current user, Falcon, can take the
-	 * packed value and use them directly.
-	 * Fail to build if this assumption is broken.
-	 */
-	BUILD_BUG_ON(FALCON_PHY_ID_10G != MDIO45_XPRT_ID_IS10G);
-	BUILD_BUG_ON(FALCON_PHY_ID_ID_WIDTH != MDIO45_PRT_DEV_WIDTH);
-	BUILD_BUG_ON(MD_PRT_ADR_COMP_LBN != MDIO45_PRT_ID_COMP_LBN);
-	BUILD_BUG_ON(MD_DEV_ADR_COMP_LBN != MDIO45_DEV_ID_COMP_LBN);
-
-	if (phy_id2 == PHY_ADDR_INVALID)
-		return;
-
-	/* See falcon_mdio_read for an explanation. */
-	if (!(phy_id & FALCON_PHY_ID_10G)) {
-		int mmd = ffs(efx->phy_op->mmds) - 1;
-		EFX_TRACE(efx, "Fixing erroneous clause22 write\n");
-		phy_id2 = mdio_clause45_pack(phy_id2, mmd)
-			& FALCON_PHY_ID_ID_MASK;
-	}
-
-	EFX_REGDUMP(efx, "writing GMII %d register %02x with %04x\n", phy_id,
-		    addr, value);
+	EFX_REGDUMP(efx, "writing MDIO %d register %d.%d with 0x%04x\n",
+		    prtad, devad, addr, value);
 
 	spin_lock_bh(&efx->phy_lock);
 
-	/* Check MII not currently being accessed */
-	if (falcon_gmii_wait(efx) != 0)
+	/* Check MDIO not currently being accessed */
+	rc = falcon_gmii_wait(efx);
+	if (rc)
 		goto out;
 
 	/* Write the address/ID register */
 	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
 	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
 
-	EFX_POPULATE_OWORD_1(reg, MD_PRT_DEV_ADR, phy_id2);
+	EFX_POPULATE_OWORD_2(reg, MD_PRT_ADR, prtad, MD_DEV_ADR, devad);
 	falcon_write(efx, &reg, MD_ID_REG_KER);
 
 	/* Write data */
@@ -2163,7 +2123,8 @@ static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
 	falcon_write(efx, &reg, MD_CS_REG_KER);
 
 	/* Wait for data to be written */
-	if (falcon_gmii_wait(efx) != 0) {
+	rc = falcon_gmii_wait(efx);
+	if (rc) {
 		/* Abort the write operation */
 		EFX_POPULATE_OWORD_2(reg,
 				     MD_WRC, 0,
@@ -2174,45 +2135,28 @@ static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
 
  out:
 	spin_unlock_bh(&efx->phy_lock);
+	return rc;
 }
 
-/* Reads a GMII register from a PHY connected to Falcon.  If no value
- * could be read, -1 will be returned. */
-static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
+/* Read an MDIO register of a PHY connected to Falcon. */
+static int falcon_mdio_read(struct net_device *net_dev,
+			    int prtad, int devad, u16 addr)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK;
 	efx_oword_t reg;
-	int value = -1;
-
-	if (phy_addr == PHY_ADDR_INVALID)
-		return -1;
-
-	/* Our PHY code knows whether it needs to talk clause 22(1G) or 45(10G)
-	 * but the generic Linux code does not make any distinction or have
-	 * any state for this.
-	 * We spot the case where someone tried to talk 22 to a 45 PHY and
-	 * redirect the request to the lowest numbered MMD as a clause45
-	 * request. This is enough to allow simple queries like id and link
-	 * state to succeed. TODO: We may need to do more in future.
-	 */
-	if (!(phy_id & FALCON_PHY_ID_10G)) {
-		int mmd = ffs(efx->phy_op->mmds) - 1;
-		EFX_TRACE(efx, "Fixing erroneous clause22 read\n");
-		phy_addr = mdio_clause45_pack(phy_addr, mmd)
-			& FALCON_PHY_ID_ID_MASK;
-	}
+	int rc;
 
 	spin_lock_bh(&efx->phy_lock);
 
-	/* Check MII not currently being accessed */
-	if (falcon_gmii_wait(efx) != 0)
+	/* Check MDIO not currently being accessed */
+	rc = falcon_gmii_wait(efx);
+	if (rc)
 		goto out;
 
 	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
 	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
 
-	EFX_POPULATE_OWORD_1(reg, MD_PRT_DEV_ADR, phy_addr);
+	EFX_POPULATE_OWORD_2(reg, MD_PRT_ADR, prtad, MD_DEV_ADR, devad);
 	falcon_write(efx, &reg, MD_ID_REG_KER);
 
 	/* Request data to be read */
@@ -2220,12 +2164,12 @@ static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
 	falcon_write(efx, &reg, MD_CS_REG_KER);
 
 	/* Wait for data to become available */
-	value = falcon_gmii_wait(efx);
-	if (value == 0) {
+	rc = falcon_gmii_wait(efx);
+	if (rc == 0) {
 		falcon_read(efx, &reg, MD_RXD_REG_KER);
-		value = EFX_OWORD_FIELD(reg, MD_RXD);
-		EFX_REGDUMP(efx, "read from GMII %d register %02x, got %04x\n",
-			    phy_id, addr, value);
+		rc = EFX_OWORD_FIELD(reg, MD_RXD);
+		EFX_REGDUMP(efx, "read from MDIO %d register %d.%d, got %04x\n",
+			    prtad, devad, addr, rc);
 	} else {
 		/* Abort the read operation */
 		EFX_POPULATE_OWORD_2(reg,
@@ -2233,22 +2177,13 @@ static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
 				     MD_GC, 1);
 		falcon_write(efx, &reg, MD_CS_REG_KER);
 
-		EFX_LOG(efx, "read from GMII 0x%x register %02x, got "
-			"error %d\n", phy_id, addr, value);
+		EFX_LOG(efx, "read from MDIO %d register %d.%d, got error %d\n",
+			prtad, devad, addr, rc);
 	}
 
  out:
 	spin_unlock_bh(&efx->phy_lock);
-
-	return value;
-}
-
-static void falcon_init_mdio(struct mii_if_info *gmii)
-{
-	gmii->mdio_read = falcon_mdio_read;
-	gmii->mdio_write = falcon_mdio_write;
-	gmii->phy_id_mask = FALCON_PHY_ID_MASK;
-	gmii->reg_num_mask = ((1 << EFX_WIDTH(MD_PHY_ADR)) - 1);
+	return rc;
 }
 
 static int falcon_probe_phy(struct efx_nic *efx)
@@ -2342,9 +2277,11 @@ int falcon_probe_port(struct efx_nic *efx)
 	if (rc)
 		return rc;
 
-	/* Set up GMII structure for PHY */
-	efx->mii.supports_gmii = true;
-	falcon_init_mdio(&efx->mii);
+	/* Set up MDIO structure for PHY */
+	efx->mdio.mmds = efx->phy_op->mmds;
+	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	efx->mdio.mdio_read = falcon_mdio_read;
+	efx->mdio.mdio_write = falcon_mdio_write;
 
 	/* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */
 	if (falcon_rev(efx) >= FALCON_REV_B0)
@@ -2761,7 +2698,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 	if (rc == -EINVAL) {
 		EFX_ERR(efx, "NVRAM is invalid therefore using defaults\n");
 		efx->phy_type = PHY_TYPE_NONE;
-		efx->mii.phy_id = PHY_ADDR_INVALID;
+		efx->mdio.prtad = MDIO_PRTAD_NONE;
 		board_rev = 0;
 		rc = 0;
 	} else if (rc) {
@@ -2771,7 +2708,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 		struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3;
 
 		efx->phy_type = v2->port0_phy_type;
-		efx->mii.phy_id = v2->port0_phy_addr;
+		efx->mdio.prtad = v2->port0_phy_addr;
 		board_rev = le16_to_cpu(v2->board_revision);
 
 		if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) {
@@ -2793,7 +2730,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 	/* Read the MAC addresses */
 	memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN);
 
-	EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mii.phy_id);
+	EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad);
 
 	efx_set_board_info(efx, board_rev);
 
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
index bda8d5bb72e..375e2a5961e 100644
--- a/drivers/net/sfc/falcon_hwdefs.h
+++ b/drivers/net/sfc/falcon_hwdefs.h
@@ -456,9 +456,6 @@
 #define MD_PRT_ADR_WIDTH 5
 #define MD_DEV_ADR_LBN 6
 #define MD_DEV_ADR_WIDTH 5
-/* Used for writing both at once */
-#define MD_PRT_DEV_ADR_LBN 6
-#define MD_PRT_DEV_ADR_WIDTH 10
 
 /* PHY management status & mask register (DWORD read only) */
 #define MD_STAT_REG_KER 0xc50
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index 5a03713685a..2b3269c0326 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -133,7 +133,7 @@ bool falcon_xaui_link_ok(struct efx_nic *efx)
 	/* If the link is up, then check the phy side of the xaui link */
 	if (efx->link_up && link_ok)
 		if (efx->phy_op->mmds & (1 << MDIO_MMD_PHYXS))
-			link_ok = mdio_clause45_phyxgxs_lane_sync(efx);
+			link_ok = efx_mdio_phyxgxs_lane_sync(efx);
 
 	return link_ok;
 }
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 9f5ec3eb341..6c33459f9ea 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -17,7 +17,7 @@
 #include "boards.h"
 #include "workarounds.h"
 
-unsigned mdio_id_oui(u32 id)
+unsigned efx_mdio_id_oui(u32 id)
 {
 	unsigned oui = 0;
 	int i;
@@ -32,52 +32,45 @@ unsigned mdio_id_oui(u32 id)
 	return oui;
 }
 
-int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
+int efx_mdio_reset_mmd(struct efx_nic *port, int mmd,
 			    int spins, int spintime)
 {
 	u32 ctrl;
-	int phy_id = port->mii.phy_id;
 
 	/* Catch callers passing values in the wrong units (or just silly) */
 	EFX_BUG_ON_PARANOID(spins * spintime >= 5000);
 
-	mdio_clause45_write(port, phy_id, mmd, MDIO_MMDREG_CTRL1,
-			    (1 << MDIO_MMDREG_CTRL1_RESET_LBN));
+	efx_mdio_write(port, mmd, MDIO_CTRL1, MDIO_CTRL1_RESET);
 	/* Wait for the reset bit to clear. */
 	do {
 		msleep(spintime);
-		ctrl = mdio_clause45_read(port, phy_id, mmd, MDIO_MMDREG_CTRL1);
+		ctrl = efx_mdio_read(port, mmd, MDIO_CTRL1);
 		spins--;
 
-	} while (spins && (ctrl & (1 << MDIO_MMDREG_CTRL1_RESET_LBN)));
+	} while (spins && (ctrl & MDIO_CTRL1_RESET));
 
 	return spins ? spins : -ETIMEDOUT;
 }
 
-static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd,
-				   int fault_fatal)
+static int efx_mdio_check_mmd(struct efx_nic *efx, int mmd, int fault_fatal)
 {
 	int status;
-	int phy_id = efx->mii.phy_id;
 
 	if (LOOPBACK_INTERNAL(efx))
 		return 0;
 
 	if (mmd != MDIO_MMD_AN) {
 		/* Read MMD STATUS2 to check it is responding. */
-		status = mdio_clause45_read(efx, phy_id, mmd,
-					    MDIO_MMDREG_STAT2);
-		if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) &
-		     ((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) !=
-		    MDIO_MMDREG_STAT2_PRESENT_VAL) {
+		status = efx_mdio_read(efx, mmd, MDIO_STAT2);
+		if ((status & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL) {
 			EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd);
 			return -EIO;
 		}
 	}
 
 	/* Read MMD STATUS 1 to check for fault. */
-	status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1);
-	if ((status & (1 << MDIO_MMDREG_STAT1_FAULT_LBN)) != 0) {
+	status = efx_mdio_read(efx, mmd, MDIO_STAT1);
+	if (status & MDIO_STAT1_FAULT) {
 		if (fault_fatal) {
 			EFX_ERR(efx, "PHY MMD %d reporting fatal"
 				" fault: status %x\n", mmd, status);
@@ -94,8 +87,7 @@ static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd,
 #define MDIO45_RESET_TIME	1000 /* ms */
 #define MDIO45_RESET_ITERS	100
 
-int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
-				  unsigned int mmd_mask)
+int efx_mdio_wait_reset_mmds(struct efx_nic *efx, unsigned int mmd_mask)
 {
 	const int spintime = MDIO45_RESET_TIME / MDIO45_RESET_ITERS;
 	int tries = MDIO45_RESET_ITERS;
@@ -109,16 +101,13 @@ int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
 		in_reset = 0;
 		while (mask) {
 			if (mask & 1) {
-				stat = mdio_clause45_read(efx,
-							  efx->mii.phy_id,
-							  mmd,
-							  MDIO_MMDREG_CTRL1);
+				stat = efx_mdio_read(efx, mmd, MDIO_CTRL1);
 				if (stat < 0) {
 					EFX_ERR(efx, "failed to read status of"
 						" MMD %d\n", mmd);
 					return -EIO;
 				}
-				if (stat & (1 << MDIO_MMDREG_CTRL1_RESET_LBN))
+				if (stat & MDIO_CTRL1_RESET)
 					in_reset |= (1 << mmd);
 			}
 			mask = mask >> 1;
@@ -137,28 +126,26 @@ int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
 	return rc;
 }
 
-int mdio_clause45_check_mmds(struct efx_nic *efx,
-			     unsigned int mmd_mask, unsigned int fatal_mask)
+int efx_mdio_check_mmds(struct efx_nic *efx,
+			unsigned int mmd_mask, unsigned int fatal_mask)
 {
-	int mmd = 0, probe_mmd, devs0, devs1;
+	int mmd = 0, probe_mmd, devs1, devs2;
 	u32 devices;
 
 	/* Historically we have probed the PHYXS to find out what devices are
 	 * present,but that doesn't work so well if the PHYXS isn't expected
 	 * to exist, if so just find the first item in the list supplied. */
-	probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS_PHYXS) ? MDIO_MMD_PHYXS :
+	probe_mmd = (mmd_mask & MDIO_DEVS_PHYXS) ? MDIO_MMD_PHYXS :
 	    __ffs(mmd_mask);
 
 	/* Check all the expected MMDs are present */
-	devs0 = mdio_clause45_read(efx, efx->mii.phy_id,
-				   probe_mmd, MDIO_MMDREG_DEVS0);
-	devs1 = mdio_clause45_read(efx, efx->mii.phy_id,
-				   probe_mmd, MDIO_MMDREG_DEVS1);
-	if (devs0 < 0 || devs1 < 0) {
+	devs1 = efx_mdio_read(efx, probe_mmd, MDIO_DEVS1);
+	devs2 = efx_mdio_read(efx, probe_mmd, MDIO_DEVS2);
+	if (devs1 < 0 || devs2 < 0) {
 		EFX_ERR(efx, "failed to read devices present\n");
 		return -EIO;
 	}
-	devices = devs0 | (devs1 << 16);
+	devices = devs1 | (devs2 << 16);
 	if ((devices & mmd_mask) != mmd_mask) {
 		EFX_ERR(efx, "required MMDs not present: got %x, "
 			"wanted %x\n", devices, mmd_mask);
@@ -170,7 +157,7 @@ int mdio_clause45_check_mmds(struct efx_nic *efx,
 	while (mmd_mask) {
 		if (mmd_mask & 1) {
 			int fault_fatal = fatal_mask & 1;
-			if (mdio_clause45_check_mmd(efx, mmd, fault_fatal))
+			if (efx_mdio_check_mmd(efx, mmd, fault_fatal))
 				return -EIO;
 		}
 		mmd_mask = mmd_mask >> 1;
@@ -181,13 +168,8 @@ int mdio_clause45_check_mmds(struct efx_nic *efx,
 	return 0;
 }
 
-bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
+bool efx_mdio_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
 {
-	int phy_id = efx->mii.phy_id;
-	u32 reg;
-	bool ok = true;
-	int mmd = 0;
-
 	/* If the port is in loopback, then we should only consider a subset
 	 * of mmd's */
 	if (LOOPBACK_INTERNAL(efx))
@@ -197,241 +179,75 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
 	else if (efx_phy_mode_disabled(efx->phy_mode))
 		return false;
 	else if (efx->loopback_mode == LOOPBACK_PHYXS)
-		mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS |
-			      MDIO_MMDREG_DEVS_PCS |
-			      MDIO_MMDREG_DEVS_PMAPMD |
-			      MDIO_MMDREG_DEVS_AN);
+		mmd_mask &= ~(MDIO_DEVS_PHYXS |
+			      MDIO_DEVS_PCS |
+			      MDIO_DEVS_PMAPMD |
+			      MDIO_DEVS_AN);
 	else if (efx->loopback_mode == LOOPBACK_PCS)
-		mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS |
-			      MDIO_MMDREG_DEVS_PMAPMD |
-			      MDIO_MMDREG_DEVS_AN);
+		mmd_mask &= ~(MDIO_DEVS_PCS |
+			      MDIO_DEVS_PMAPMD |
+			      MDIO_DEVS_AN);
 	else if (efx->loopback_mode == LOOPBACK_PMAPMD)
-		mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD |
-			      MDIO_MMDREG_DEVS_AN);
-
-	if (!mmd_mask) {
-		/* Use presence of XGMII faults in leui of link state */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
-					 MDIO_PHYXS_STATUS2);
-		return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN));
-	}
+		mmd_mask &= ~(MDIO_DEVS_PMAPMD |
+			      MDIO_DEVS_AN);
 
-	while (mmd_mask) {
-		if (mmd_mask & 1) {
-			/* Double reads because link state is latched, and a
-			 * read moves the current state into the register */
-			reg = mdio_clause45_read(efx, phy_id,
-						 mmd, MDIO_MMDREG_STAT1);
-			reg = mdio_clause45_read(efx, phy_id,
-						 mmd, MDIO_MMDREG_STAT1);
-			ok = ok && (reg & (1 << MDIO_MMDREG_STAT1_LINK_LBN));
-		}
-		mmd_mask = (mmd_mask >> 1);
-		mmd++;
-	}
-	return ok;
+	return mdio45_links_ok(&efx->mdio, mmd_mask);
 }
 
-void mdio_clause45_transmit_disable(struct efx_nic *efx)
+void efx_mdio_transmit_disable(struct efx_nic *efx)
 {
-	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			       MDIO_MMDREG_TXDIS, MDIO_MMDREG_TXDIS_GLOBAL_LBN,
-			       efx->phy_mode & PHY_MODE_TX_DISABLED);
+	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD,
+			  MDIO_PMA_TXDIS, MDIO_PMD_TXDIS_GLOBAL,
+			  efx->phy_mode & PHY_MODE_TX_DISABLED);
 }
 
-void mdio_clause45_phy_reconfigure(struct efx_nic *efx)
+void efx_mdio_phy_reconfigure(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
-
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
-			       MDIO_MMDREG_CTRL1, MDIO_PMAPMD_CTRL1_LBACK_LBN,
-			       efx->loopback_mode == LOOPBACK_PMAPMD);
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PCS,
-			       MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN,
-			       efx->loopback_mode == LOOPBACK_PCS);
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS,
-			       MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN,
-			       efx->loopback_mode == LOOPBACK_NETWORK);
+	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD,
+			  MDIO_CTRL1, MDIO_PMA_CTRL1_LOOPBACK,
+			  efx->loopback_mode == LOOPBACK_PMAPMD);
+	efx_mdio_set_flag(efx, MDIO_MMD_PCS,
+			  MDIO_CTRL1, MDIO_PCS_CTRL1_LOOPBACK,
+			  efx->loopback_mode == LOOPBACK_PCS);
+	efx_mdio_set_flag(efx, MDIO_MMD_PHYXS,
+			  MDIO_CTRL1, MDIO_PHYXS_CTRL1_LOOPBACK,
+			  efx->loopback_mode == LOOPBACK_NETWORK);
 }
 
-static void mdio_clause45_set_mmd_lpower(struct efx_nic *efx,
-					 int lpower, int mmd)
+static void efx_mdio_set_mmd_lpower(struct efx_nic *efx,
+				    int lpower, int mmd)
 {
-	int phy = efx->mii.phy_id;
-	int stat = mdio_clause45_read(efx, phy, mmd, MDIO_MMDREG_STAT1);
+	int stat = efx_mdio_read(efx, mmd, MDIO_STAT1);
 
 	EFX_TRACE(efx, "Setting low power mode for MMD %d to %d\n",
 		  mmd, lpower);
 
-	if (stat & (1 << MDIO_MMDREG_STAT1_LPABLE_LBN)) {
-		mdio_clause45_set_flag(efx, phy, mmd, MDIO_MMDREG_CTRL1,
-				       MDIO_MMDREG_CTRL1_LPOWER_LBN, lpower);
+	if (stat & MDIO_STAT1_LPOWERABLE) {
+		efx_mdio_set_flag(efx, mmd, MDIO_CTRL1,
+				  MDIO_CTRL1_LPOWER, lpower);
 	}
 }
 
-void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
-				   int low_power, unsigned int mmd_mask)
+void efx_mdio_set_mmds_lpower(struct efx_nic *efx,
+			      int low_power, unsigned int mmd_mask)
 {
 	int mmd = 0;
-	mmd_mask &= ~MDIO_MMDREG_DEVS_AN;
+	mmd_mask &= ~MDIO_DEVS_AN;
 	while (mmd_mask) {
 		if (mmd_mask & 1)
-			mdio_clause45_set_mmd_lpower(efx, low_power, mmd);
+			efx_mdio_set_mmd_lpower(efx, low_power, mmd);
 		mmd_mask = (mmd_mask >> 1);
 		mmd++;
 	}
 }
 
-static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr)
-{
-	int phy_id = efx->mii.phy_id;
-	u32 result = 0;
-	int reg;
-
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, addr);
-	if (reg & ADVERTISE_10HALF)
-		result |= ADVERTISED_10baseT_Half;
-	if (reg & ADVERTISE_10FULL)
-		result |= ADVERTISED_10baseT_Full;
-	if (reg & ADVERTISE_100HALF)
-		result |= ADVERTISED_100baseT_Half;
-	if (reg & ADVERTISE_100FULL)
-		result |= ADVERTISED_100baseT_Full;
-	return result;
-}
-
-/**
- * mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO.
- * @efx:		Efx NIC
- * @ecmd: 		Buffer for settings
- *
- * On return the 'port', 'speed', 'supported' and 'advertising' fields of
- * ecmd have been filled out.
- */
-void mdio_clause45_get_settings(struct efx_nic *efx,
-				struct ethtool_cmd *ecmd)
-{
-	mdio_clause45_get_settings_ext(efx, ecmd, 0, 0);
-}
-
-/**
- * mdio_clause45_get_settings_ext - Read (some of) the PHY settings over MDIO.
- * @efx:		Efx NIC
- * @ecmd: 		Buffer for settings
- * @xnp:		Advertised Extended Next Page state
- * @xnp_lpa:		Link Partner's advertised XNP state
- *
- * On return the 'port', 'speed', 'supported' and 'advertising' fields of
- * ecmd have been filled out.
- */
-void mdio_clause45_get_settings_ext(struct efx_nic *efx,
-				    struct ethtool_cmd *ecmd,
-				    u32 npage_adv, u32 npage_lpa)
-{
-	int phy_id = efx->mii.phy_id;
-	int reg;
-
-	ecmd->transceiver = XCVR_INTERNAL;
-	ecmd->phy_address = phy_id;
-
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 MDIO_MMDREG_CTRL2);
-	switch (reg & MDIO_PMAPMD_CTRL2_TYPE_MASK) {
-	case MDIO_PMAPMD_CTRL2_10G_BT:
-	case MDIO_PMAPMD_CTRL2_1G_BT:
-	case MDIO_PMAPMD_CTRL2_100_BT:
-	case MDIO_PMAPMD_CTRL2_10_BT:
-		ecmd->port = PORT_TP;
-		ecmd->supported = SUPPORTED_TP;
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 MDIO_MMDREG_SPEED);
-		if (reg & (1 << MDIO_MMDREG_SPEED_10G_LBN))
-			ecmd->supported |= SUPPORTED_10000baseT_Full;
-		if (reg & (1 << MDIO_MMDREG_SPEED_1000M_LBN))
-			ecmd->supported |= (SUPPORTED_1000baseT_Full |
-					    SUPPORTED_1000baseT_Half);
-		if (reg & (1 << MDIO_MMDREG_SPEED_100M_LBN))
-			ecmd->supported |= (SUPPORTED_100baseT_Full |
-					    SUPPORTED_100baseT_Half);
-		if (reg & (1 << MDIO_MMDREG_SPEED_10M_LBN))
-			ecmd->supported |= (SUPPORTED_10baseT_Full |
-					    SUPPORTED_10baseT_Half);
-		ecmd->advertising = ADVERTISED_TP;
-		break;
-
-	/* We represent CX4 as fibre in the absence of anything better */
-	case MDIO_PMAPMD_CTRL2_10G_CX4:
-	/* All the other defined modes are flavours of optical */
-	default:
-		ecmd->port = PORT_FIBRE;
-		ecmd->supported = SUPPORTED_FIBRE;
-		ecmd->advertising = ADVERTISED_FIBRE;
-		break;
-	}
-
-	if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
-		ecmd->supported |= SUPPORTED_Autoneg;
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_MMDREG_CTRL1);
-		if (reg & BMCR_ANENABLE) {
-			ecmd->autoneg = AUTONEG_ENABLE;
-			ecmd->advertising |=
-				ADVERTISED_Autoneg |
-				mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) |
-				npage_adv;
-		} else
-			ecmd->autoneg = AUTONEG_DISABLE;
-	} else
-		ecmd->autoneg = AUTONEG_DISABLE;
-
-	if (ecmd->autoneg) {
-		/* If AN is complete, report best common mode,
-		 * otherwise report best advertised mode. */
-		u32 modes = 0;
-		if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-				       MDIO_MMDREG_STAT1) &
-		    (1 << MDIO_AN_STATUS_AN_DONE_LBN))
-			modes = (ecmd->advertising &
-				 (mdio_clause45_get_an(efx, MDIO_AN_LPA) |
-				  npage_lpa));
-		if (modes == 0)
-			modes = ecmd->advertising;
-
-		if (modes & ADVERTISED_10000baseT_Full) {
-			ecmd->speed = SPEED_10000;
-			ecmd->duplex = DUPLEX_FULL;
-		} else if (modes & (ADVERTISED_1000baseT_Full |
-				    ADVERTISED_1000baseT_Half)) {
-			ecmd->speed = SPEED_1000;
-			ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full);
-		} else if (modes & (ADVERTISED_100baseT_Full |
-				    ADVERTISED_100baseT_Half)) {
-			ecmd->speed = SPEED_100;
-			ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
-		} else {
-			ecmd->speed = SPEED_10;
-			ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
-		}
-	} else {
-		/* Report forced settings */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 MDIO_MMDREG_CTRL1);
-		ecmd->speed = (((reg & BMCR_SPEED1000) ? 100 : 1) *
-			       ((reg & BMCR_SPEED100) ? 100 : 10));
-		ecmd->duplex = (reg & BMCR_FULLDPLX ||
-				ecmd->speed == SPEED_10000);
-	}
-}
-
 /**
- * mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO.
+ * efx_mdio_set_settings - Set (some of) the PHY settings over MDIO.
  * @efx:		Efx NIC
  * @ecmd: 		New settings
  */
-int mdio_clause45_set_settings(struct efx_nic *efx,
-			       struct ethtool_cmd *ecmd)
+int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
 	struct ethtool_cmd prev;
 	u32 required;
 	int reg;
@@ -488,95 +304,48 @@ int mdio_clause45_set_settings(struct efx_nic *efx,
 		else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
 					      ADVERTISED_1000baseT_Full))
 			reg |= ADVERTISE_NPAGE;
-		reg |= efx_fc_advertise(efx->wanted_fc);
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-				    MDIO_AN_ADVERTISE, reg);
+		reg |= mii_advertise_flowctrl(efx->wanted_fc);
+		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
 
 		/* Set up the (extended) next page if necessary */
 		if (efx->phy_op->set_npage_adv)
 			efx->phy_op->set_npage_adv(efx, ecmd->advertising);
 
 		/* Enable and restart AN */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_MMDREG_CTRL1);
-		reg |= BMCR_ANENABLE;
+		reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
+		reg |= MDIO_AN_CTRL1_ENABLE;
 		if (!(EFX_WORKAROUND_15195(efx) &&
 		      LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
-			reg |= BMCR_ANRESTART;
+			reg |= MDIO_AN_CTRL1_RESTART;
 		if (xnp)
-			reg |= 1 << MDIO_AN_CTRL_XNP_LBN;
+			reg |= MDIO_AN_CTRL1_XNP;
 		else
-			reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN);
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-				    MDIO_MMDREG_CTRL1, reg);
+			reg &= ~MDIO_AN_CTRL1_XNP;
+		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
 	} else {
 		/* Disable AN */
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
-				       MDIO_MMDREG_CTRL1,
-				       __ffs(BMCR_ANENABLE), false);
+		efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_CTRL1,
+				  MDIO_AN_CTRL1_ENABLE, false);
 
 		/* Set the basic control bits */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 MDIO_MMDREG_CTRL1);
-		reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX |
-			 0x003c);
+		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1);
+		reg &= ~(MDIO_CTRL1_SPEEDSEL | MDIO_CTRL1_FULLDPLX);
 		if (ecmd->speed == SPEED_100)
-			reg |= BMCR_SPEED100;
+			reg |= MDIO_PMA_CTRL1_SPEED100;
 		if (ecmd->duplex)
-			reg |= BMCR_FULLDPLX;
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-				    MDIO_MMDREG_CTRL1, reg);
+			reg |= MDIO_CTRL1_FULLDPLX;
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, reg);
 	}
 
 	return 0;
 }
 
-void mdio_clause45_set_pause(struct efx_nic *efx)
-{
-	int phy_id = efx->mii.phy_id;
-	int reg;
-
-	if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) {
-		/* Set pause capability advertising */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_AN_ADVERTISE);
-		reg &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-		reg |= efx_fc_advertise(efx->wanted_fc);
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-				    MDIO_AN_ADVERTISE, reg);
-
-		/* Restart auto-negotiation */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_MMDREG_CTRL1);
-		if (reg & BMCR_ANENABLE) {
-			reg |= BMCR_ANRESTART;
-			mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
-					    MDIO_MMDREG_CTRL1, reg);
-		}
-	}
-}
-
-enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx)
+enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
 	int lpa;
 
-	if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)))
+	if (!(efx->phy_op->mmds & MDIO_DEVS_AN))
 		return efx->wanted_fc;
-	lpa = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_AN_LPA);
+	lpa = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_LPA);
 	return efx_fc_resolve(efx->wanted_fc, lpa);
 }
-
-void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev,
-			    u16 addr, int bit, bool sense)
-{
-	int old_val = mdio_clause45_read(efx, prt, dev, addr);
-	int new_val;
-
-	if (sense)
-		new_val = old_val | (1 << bit);
-	else
-		new_val = old_val & ~(1 << bit);
-	if (old_val != new_val)
-		mdio_clause45_write(efx, prt, dev, addr, new_val);
-}
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 7014d2279c2..6b14421a744 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -10,247 +10,53 @@
 #ifndef EFX_MDIO_10G_H
 #define EFX_MDIO_10G_H
 
+#include <linux/mdio.h>
+
 /*
- * Definitions needed for doing 10G MDIO as specified in clause 45
- * MDIO, which do not appear in Linux yet. Also some helper functions.
+ * Helper functions for doing 10G MDIO as specified in IEEE 802.3 clause 45.
  */
 
 #include "efx.h"
 #include "boards.h"
 
-/* Numbering of the MDIO Manageable Devices (MMDs) */
-/* Physical Medium Attachment/ Physical Medium Dependent sublayer */
-#define MDIO_MMD_PMAPMD	(1)
-/* WAN Interface Sublayer */
-#define MDIO_MMD_WIS	(2)
-/* Physical Coding Sublayer */
-#define MDIO_MMD_PCS	(3)
-/* PHY Extender Sublayer */
-#define MDIO_MMD_PHYXS	(4)
-/* Extender Sublayer */
-#define MDIO_MMD_DTEXS	(5)
-/* Transmission convergence */
-#define MDIO_MMD_TC	(6)
-/* Auto negotiation */
-#define MDIO_MMD_AN	(7)
-/* Clause 22 extension */
-#define MDIO_MMD_C22EXT	29
-
-/* Generic register locations */
-#define MDIO_MMDREG_CTRL1	(0)
-#define MDIO_MMDREG_STAT1	(1)
-#define MDIO_MMDREG_IDHI	(2)
-#define MDIO_MMDREG_IDLOW	(3)
-#define MDIO_MMDREG_SPEED	(4)
-#define MDIO_MMDREG_DEVS0	(5)
-#define MDIO_MMDREG_DEVS1	(6)
-#define MDIO_MMDREG_CTRL2	(7)
-#define MDIO_MMDREG_STAT2	(8)
-#define MDIO_MMDREG_TXDIS	(9)
-
-/* Bits in MMDREG_CTRL1 */
-/* Reset */
-#define MDIO_MMDREG_CTRL1_RESET_LBN	(15)
-#define MDIO_MMDREG_CTRL1_RESET_WIDTH	(1)
-/* Loopback */
-/* Loopback bit for WIS, PCS, PHYSX and DTEXS */
-#define MDIO_MMDREG_CTRL1_LBACK_LBN	(14)
-#define MDIO_MMDREG_CTRL1_LBACK_WIDTH	(1)
-/* Low power */
-#define MDIO_MMDREG_CTRL1_LPOWER_LBN	(11)
-#define MDIO_MMDREG_CTRL1_LPOWER_WIDTH	(1)
-
-/* Bits in MMDREG_STAT1 */
-#define MDIO_MMDREG_STAT1_FAULT_LBN	(7)
-#define MDIO_MMDREG_STAT1_FAULT_WIDTH	(1)
-/* Link state */
-#define MDIO_MMDREG_STAT1_LINK_LBN	(2)
-#define MDIO_MMDREG_STAT1_LINK_WIDTH	(1)
-/* Low power ability */
-#define MDIO_MMDREG_STAT1_LPABLE_LBN	(1)
-#define MDIO_MMDREG_STAT1_LPABLE_WIDTH	(1)
-
-/* Bits in combined ID regs */
-static inline unsigned mdio_id_rev(u32 id) { return id & 0xf; }
-static inline unsigned mdio_id_model(u32 id) { return (id >> 4) & 0x3f; }
-extern unsigned mdio_id_oui(u32 id);
-
-/* Bits in MMDREG_DEVS0/1. Someone thoughtfully layed things out
- * so the 'bit present' bit number of an MMD is the number of
- * that MMD */
-#define DEV_PRESENT_BIT(_b) (1 << _b)
-
-#define MDIO_MMDREG_DEVS_PHYXS	DEV_PRESENT_BIT(MDIO_MMD_PHYXS)
-#define MDIO_MMDREG_DEVS_PCS	DEV_PRESENT_BIT(MDIO_MMD_PCS)
-#define MDIO_MMDREG_DEVS_PMAPMD	DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)
-#define MDIO_MMDREG_DEVS_AN	DEV_PRESENT_BIT(MDIO_MMD_AN)
-#define MDIO_MMDREG_DEVS_C22EXT	DEV_PRESENT_BIT(MDIO_MMD_C22EXT)
-
-/* Bits in MMDREG_SPEED */
-#define MDIO_MMDREG_SPEED_10G_LBN	0
-#define MDIO_MMDREG_SPEED_10G_WIDTH	1
-#define MDIO_MMDREG_SPEED_1000M_LBN	4
-#define MDIO_MMDREG_SPEED_1000M_WIDTH	1
-#define MDIO_MMDREG_SPEED_100M_LBN	5
-#define MDIO_MMDREG_SPEED_100M_WIDTH	1
-#define MDIO_MMDREG_SPEED_10M_LBN	6
-#define MDIO_MMDREG_SPEED_10M_WIDTH	1
-
-/* Bits in MMDREG_STAT2 */
-#define MDIO_MMDREG_STAT2_PRESENT_VAL	(2)
-#define MDIO_MMDREG_STAT2_PRESENT_LBN	(14)
-#define MDIO_MMDREG_STAT2_PRESENT_WIDTH (2)
-
-/* Bits in MMDREG_TXDIS */
-#define MDIO_MMDREG_TXDIS_GLOBAL_LBN    (0)
-#define MDIO_MMDREG_TXDIS_GLOBAL_WIDTH  (1)
-
-/* MMD-specific bits, ordered by MMD, then register */
-#define MDIO_PMAPMD_CTRL1_LBACK_LBN	(0)
-#define MDIO_PMAPMD_CTRL1_LBACK_WIDTH	(1)
-
-/* PMA type (4 bits) */
-#define MDIO_PMAPMD_CTRL2_10G_CX4	(0x0)
-#define MDIO_PMAPMD_CTRL2_10G_EW	(0x1)
-#define MDIO_PMAPMD_CTRL2_10G_LW	(0x2)
-#define MDIO_PMAPMD_CTRL2_10G_SW	(0x3)
-#define MDIO_PMAPMD_CTRL2_10G_LX4	(0x4)
-#define MDIO_PMAPMD_CTRL2_10G_ER	(0x5)
-#define MDIO_PMAPMD_CTRL2_10G_LR	(0x6)
-#define MDIO_PMAPMD_CTRL2_10G_SR	(0x7)
-/* Reserved */
-#define MDIO_PMAPMD_CTRL2_10G_BT	(0x9)
-/* Reserved */
-/* Reserved */
-#define MDIO_PMAPMD_CTRL2_1G_BT		(0xc)
-/* Reserved */
-#define MDIO_PMAPMD_CTRL2_100_BT	(0xe)
-#define MDIO_PMAPMD_CTRL2_10_BT		(0xf)
-#define MDIO_PMAPMD_CTRL2_TYPE_MASK	(0xf)
-
-/* PMA 10GBT registers */
-#define MDIO_PMAPMD_10GBT_TXPWR		(131)
-#define MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN (0)
-#define MDIO_PMAPMD_10GBT_TXPWR_SHORT_WIDTH (1)
-
-/* PHY XGXS Status 2 */
-#define MDIO_PHYXS_STATUS2              (8)
-#define MDIO_PHYXS_STATUS2_RX_FAULT_LBN 10
-
-/* PHY XGXS lane state */
-#define MDIO_PHYXS_LANE_STATE		(0x18)
-#define MDIO_PHYXS_LANE_ALIGNED_LBN	(12)
-
-/* AN registers */
-#define MDIO_AN_CTRL_XNP_LBN		13
-#define MDIO_AN_STATUS			(1)
-#define MDIO_AN_STATUS_XNP_LBN		(7)
-#define MDIO_AN_STATUS_PAGE_LBN		(6)
-#define MDIO_AN_STATUS_AN_DONE_LBN	(5)
-#define MDIO_AN_STATUS_LP_AN_CAP_LBN	(0)
-
-#define MDIO_AN_ADVERTISE		16
-#define MDIO_AN_ADVERTISE_XNP_LBN	12
-#define MDIO_AN_LPA			19
-#define MDIO_AN_XNP			22
-#define MDIO_AN_LPA_XNP			25
-
-#define MDIO_AN_10GBT_CTRL		32
-#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN	12
-#define MDIO_AN_10GBT_STATUS		(33)
-#define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
-#define MDIO_AN_10GBT_STATUS_MS_LBN     (14) /* MASTER/SLAVE config */
-#define MDIO_AN_10GBT_STATUS_LOC_OK_LBN (13) /* Local OK */
-#define MDIO_AN_10GBT_STATUS_REM_OK_LBN (12) /* Remote OK */
-#define MDIO_AN_10GBT_STATUS_LP_10G_LBN (11) /* Link partner is 10GBT capable */
-#define MDIO_AN_10GBT_STATUS_LP_LTA_LBN (10) /* LP loop timing ability */
-#define MDIO_AN_10GBT_STATUS_LP_TRR_LBN (9)  /* LP Training Reset Request */
-
+static inline unsigned efx_mdio_id_rev(u32 id) { return id & 0xf; }
+static inline unsigned efx_mdio_id_model(u32 id) { return (id >> 4) & 0x3f; }
+extern unsigned efx_mdio_id_oui(u32 id);
 
-/* Packing of the prt and dev arguments of clause 45 style MDIO into a
- * single int so they can be passed into the mdio_read/write functions
- * that currently exist. Note that as Falcon is the only current user,
- * the packed form is chosen to match what Falcon needs to write into
- * a register. This is checked at compile-time so do not change it. If
- * your target chip needs things layed out differently you will need
- * to unpack the arguments in your chip-specific mdio functions.
- */
- /* These are defined by the standard. */
-#define MDIO45_PRT_ID_WIDTH  (5)
-#define MDIO45_DEV_ID_WIDTH  (5)
-
-/* The prt ID is just packed in immediately to the left of the dev ID */
-#define MDIO45_PRT_DEV_WIDTH (MDIO45_PRT_ID_WIDTH + MDIO45_DEV_ID_WIDTH)
-
-#define MDIO45_PRT_ID_MASK   ((1 << MDIO45_PRT_DEV_WIDTH) - 1)
-/* This is the prt + dev extended by 1 bit to hold the 'is clause 45' flag. */
-#define MDIO45_XPRT_ID_WIDTH   (MDIO45_PRT_DEV_WIDTH + 1)
-#define MDIO45_XPRT_ID_MASK   ((1 << MDIO45_XPRT_ID_WIDTH) - 1)
-#define MDIO45_XPRT_ID_IS10G   (1 << (MDIO45_XPRT_ID_WIDTH - 1))
-
-
-#define MDIO45_PRT_ID_COMP_LBN   MDIO45_DEV_ID_WIDTH
-#define MDIO45_PRT_ID_COMP_WIDTH  MDIO45_PRT_ID_WIDTH
-#define MDIO45_DEV_ID_COMP_LBN    0
-#define MDIO45_DEV_ID_COMP_WIDTH  MDIO45_DEV_ID_WIDTH
-
-/* Compose port and device into a phy_id */
-static inline int mdio_clause45_pack(u8 prt, u8 dev)
-{
-	efx_dword_t phy_id;
-	EFX_POPULATE_DWORD_2(phy_id, MDIO45_PRT_ID_COMP, prt,
-			     MDIO45_DEV_ID_COMP, dev);
-	return MDIO45_XPRT_ID_IS10G | EFX_DWORD_VAL(phy_id);
-}
-
-static inline void mdio_clause45_unpack(u32 val, u8 *prt, u8 *dev)
+static inline int efx_mdio_read(struct efx_nic *efx, int devad, int addr)
 {
-	efx_dword_t phy_id;
-	EFX_POPULATE_DWORD_1(phy_id, EFX_DWORD_0, val);
-	*prt = EFX_DWORD_FIELD(phy_id, MDIO45_PRT_ID_COMP);
-	*dev = EFX_DWORD_FIELD(phy_id, MDIO45_DEV_ID_COMP);
+	return efx->mdio.mdio_read(efx->net_dev, efx->mdio.prtad, devad, addr);
 }
 
-static inline int mdio_clause45_read(struct efx_nic *efx,
-				     u8 prt, u8 dev, u16 addr)
+static inline void
+efx_mdio_write(struct efx_nic *efx, int devad, int addr, int value)
 {
-	return efx->mii.mdio_read(efx->net_dev,
-				  mdio_clause45_pack(prt, dev), addr);
+	efx->mdio.mdio_write(efx->net_dev, efx->mdio.prtad, devad, addr, value);
 }
 
-static inline void mdio_clause45_write(struct efx_nic *efx,
-				       u8 prt, u8 dev, u16 addr, int value)
+static inline u32 efx_mdio_read_id(struct efx_nic *efx, int mmd)
 {
-	efx->mii.mdio_write(efx->net_dev,
-			    mdio_clause45_pack(prt, dev), addr, value);
-}
-
-
-static inline u32 mdio_clause45_read_id(struct efx_nic *efx, int mmd)
-{
-	int phy_id = efx->mii.phy_id;
-	u16 id_low = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDLOW);
-	u16 id_hi = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDHI);
+	u16 id_low = efx_mdio_read(efx, mmd, MDIO_DEVID2);
+	u16 id_hi = efx_mdio_read(efx, mmd, MDIO_DEVID1);
 	return (id_hi << 16) | (id_low);
 }
 
-static inline bool mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx)
+static inline bool efx_mdio_phyxgxs_lane_sync(struct efx_nic *efx)
 {
 	int i, lane_status;
 	bool sync;
 
 	for (i = 0; i < 2; ++i)
-		lane_status = mdio_clause45_read(efx, efx->mii.phy_id,
-						 MDIO_MMD_PHYXS,
-						 MDIO_PHYXS_LANE_STATE);
+		lane_status = efx_mdio_read(efx, MDIO_MMD_PHYXS,
+					    MDIO_PHYXS_LNSTAT);
 
-	sync = !!(lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN));
+	sync = !!(lane_status & MDIO_PHYXS_LNSTAT_ALIGN);
 	if (!sync)
 		EFX_LOG(efx, "XGXS lane status: %x\n", lane_status);
 	return sync;
 }
 
-extern const char *mdio_clause45_mmd_name(int mmd);
+extern const char *efx_mdio_mmd_name(int mmd);
 
 /*
  * Reset a specific MMD and wait for reset to clear.
@@ -258,54 +64,44 @@ extern const char *mdio_clause45_mmd_name(int mmd);
  *
  * This function will sleep
  */
-extern int mdio_clause45_reset_mmd(struct efx_nic *efx, int mmd,
-				   int spins, int spintime);
+extern int efx_mdio_reset_mmd(struct efx_nic *efx, int mmd,
+			      int spins, int spintime);
 
-/* As mdio_clause45_check_mmd but for multiple MMDs */
-int mdio_clause45_check_mmds(struct efx_nic *efx,
-			     unsigned int mmd_mask, unsigned int fatal_mask);
+/* As efx_mdio_check_mmd but for multiple MMDs */
+int efx_mdio_check_mmds(struct efx_nic *efx,
+			unsigned int mmd_mask, unsigned int fatal_mask);
 
 /* Check the link status of specified mmds in bit mask */
-extern bool mdio_clause45_links_ok(struct efx_nic *efx,
-				   unsigned int mmd_mask);
+extern bool efx_mdio_links_ok(struct efx_nic *efx, unsigned int mmd_mask);
 
 /* Generic transmit disable support though PMAPMD */
-extern void mdio_clause45_transmit_disable(struct efx_nic *efx);
+extern void efx_mdio_transmit_disable(struct efx_nic *efx);
 
 /* Generic part of reconfigure: set/clear loopback bits */
-extern void mdio_clause45_phy_reconfigure(struct efx_nic *efx);
+extern void efx_mdio_phy_reconfigure(struct efx_nic *efx);
 
 /* Set the power state of the specified MMDs */
-extern void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
-					  int low_power, unsigned int mmd_mask);
-
-/* Read (some of) the PHY settings over MDIO */
-extern void mdio_clause45_get_settings(struct efx_nic *efx,
-				       struct ethtool_cmd *ecmd);
-
-/* Read (some of) the PHY settings over MDIO */
-extern void
-mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd,
-			       u32 xnp, u32 xnp_lpa);
+extern void efx_mdio_set_mmds_lpower(struct efx_nic *efx,
+				     int low_power, unsigned int mmd_mask);
 
 /* Set (some of) the PHY settings over MDIO */
-extern int mdio_clause45_set_settings(struct efx_nic *efx,
-				      struct ethtool_cmd *ecmd);
-
-/* Set pause parameters to be advertised through AN (if available) */
-extern void mdio_clause45_set_pause(struct efx_nic *efx);
+extern int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd);
 
 /* Get pause parameters from AN if available (otherwise return
  * requested pause parameters)
  */
-enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx);
+enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx);
 
 /* Wait for specified MMDs to exit reset within a timeout */
-extern int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
-					 unsigned int mmd_mask);
+extern int efx_mdio_wait_reset_mmds(struct efx_nic *efx,
+				    unsigned int mmd_mask);
 
 /* Set or clear flag, debouncing */
-extern void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev,
-				   u16 addr, int bit, bool sense);
+static inline void
+efx_mdio_set_flag(struct efx_nic *efx, int devad, int addr,
+		  int mask, bool state)
+{
+	mdio_set_flag(&efx->mdio, efx->mdio.prtad, devad, addr, mask, state);
+}
 
 #endif /* EFX_MDIO_10G_H */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index e169e5dcd1e..5eabede9ac1 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -19,7 +19,7 @@
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
 #include <linux/timer.h>
-#include <linux/mii.h>
+#include <linux/mdio.h>
 #include <linux/list.h>
 #include <linux/pci.h>
 #include <linux/device.h>
@@ -458,8 +458,6 @@ enum phy_type {
 	PHY_TYPE_MAX	/* Insert any new items before this */
 };
 
-#define PHY_ADDR_INVALID 0xff
-
 #define EFX_IS10G(efx) ((efx)->link_speed == 10000)
 
 enum nic_state {
@@ -497,8 +495,8 @@ struct efx_nic;
 
 /* Pseudo bit-mask flow control field */
 enum efx_fc_type {
-	EFX_FC_RX = 1,
-	EFX_FC_TX = 2,
+	EFX_FC_RX = FLOW_CTRL_RX,
+	EFX_FC_TX = FLOW_CTRL_TX,
 	EFX_FC_AUTO = 4,
 };
 
@@ -508,33 +506,15 @@ enum efx_mac_type {
 	EFX_XMAC = 2,
 };
 
-static inline unsigned int efx_fc_advertise(enum efx_fc_type wanted_fc)
-{
-	unsigned int adv = 0;
-	if (wanted_fc & EFX_FC_RX)
-		adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-	if (wanted_fc & EFX_FC_TX)
-		adv ^= ADVERTISE_PAUSE_ASYM;
-	return adv;
-}
-
 static inline enum efx_fc_type efx_fc_resolve(enum efx_fc_type wanted_fc,
 					      unsigned int lpa)
 {
-	unsigned int adv = efx_fc_advertise(wanted_fc);
+	BUILD_BUG_ON(EFX_FC_AUTO & (EFX_FC_RX | EFX_FC_TX));
 
 	if (!(wanted_fc & EFX_FC_AUTO))
 		return wanted_fc;
 
-	if (adv & lpa & ADVERTISE_PAUSE_CAP)
-		return EFX_FC_RX | EFX_FC_TX;
-	if (adv & lpa & ADVERTISE_PAUSE_ASYM) {
-		if (adv & ADVERTISE_PAUSE_CAP)
-			return EFX_FC_RX;
-		if (lpa & ADVERTISE_PAUSE_CAP)
-			return EFX_FC_TX;
-	}
-	return 0;
+	return mii_resolve_flowctrl_fdx(mii_advertise_flowctrl(wanted_fc), lpa);
 }
 
 /**
@@ -758,7 +738,7 @@ union efx_multicast_hash {
  * @phy_lock: PHY access lock
  * @phy_op: PHY interface
  * @phy_data: PHY private data (including PHY-specific stats)
- * @mii: PHY interface
+ * @mdio: PHY MDIO interface
  * @phy_mode: PHY operating mode. Serialised by @mac_lock.
  * @mac_up: MAC link state
  * @link_up: Link status
@@ -845,7 +825,7 @@ struct efx_nic {
 	struct work_struct phy_work;
 	struct efx_phy_operations *phy_op;
 	void *phy_data;
-	struct mii_if_info mii;
+	struct mdio_if_info mdio;
 	enum efx_phy_mode phy_mode;
 
 	bool mac_up;
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 66d7fe3db3e..01f9432c31e 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -450,17 +450,27 @@ static void efx_rx_packet_lro(struct efx_channel *channel,
 
 	/* Pass the skb/page into the LRO engine */
 	if (rx_buf->page) {
-		struct napi_gro_fraginfo info;
+		struct sk_buff *skb = napi_get_frags(napi);
 
-		info.frags[0].page = rx_buf->page;
-		info.frags[0].page_offset = efx_rx_buf_offset(rx_buf);
-		info.frags[0].size = rx_buf->len;
-		info.nr_frags = 1;
-		info.ip_summed = CHECKSUM_UNNECESSARY;
-		info.len = rx_buf->len;
+		if (!skb) {
+			put_page(rx_buf->page);
+			goto out;
+		}
+
+		skb_shinfo(skb)->frags[0].page = rx_buf->page;
+		skb_shinfo(skb)->frags[0].page_offset =
+			efx_rx_buf_offset(rx_buf);
+		skb_shinfo(skb)->frags[0].size = rx_buf->len;
+		skb_shinfo(skb)->nr_frags = 1;
+
+		skb->len = rx_buf->len;
+		skb->data_len = rx_buf->len;
+		skb->truesize += rx_buf->len;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-		napi_gro_frags(napi, &info);
+		napi_gro_frags(napi);
 
+out:
 		EFX_BUG_ON_PARANOID(rx_buf->skb);
 		rx_buf->page = NULL;
 	} else {
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index 0a598084c51..b67ccca3fc1 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -80,39 +80,38 @@ struct efx_loopback_state {
  *
  **************************************************************************/
 
-static int efx_test_mii(struct efx_nic *efx, struct efx_self_tests *tests)
+static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests)
 {
 	int rc = 0;
+	int devad = __ffs(efx->mdio.mmds);
 	u16 physid1, physid2;
-	struct mii_if_info *mii = &efx->mii;
-	struct net_device *net_dev = efx->net_dev;
 
 	if (efx->phy_type == PHY_TYPE_NONE)
 		return 0;
 
 	mutex_lock(&efx->mac_lock);
-	tests->mii = -1;
+	tests->mdio = -1;
 
-	physid1 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID1);
-	physid2 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID2);
+	physid1 = efx_mdio_read(efx, devad, MDIO_DEVID1);
+	physid2 = efx_mdio_read(efx, devad, MDIO_DEVID2);
 
 	if ((physid1 == 0x0000) || (physid1 == 0xffff) ||
 	    (physid2 == 0x0000) || (physid2 == 0xffff)) {
-		EFX_ERR(efx, "no MII PHY present with ID %d\n",
-			mii->phy_id);
+		EFX_ERR(efx, "no MDIO PHY present with ID %d\n",
+			efx->mdio.prtad);
 		rc = -EINVAL;
 		goto out;
 	}
 
 	if (EFX_IS10G(efx)) {
-		rc = mdio_clause45_check_mmds(efx, efx->phy_op->mmds, 0);
+		rc = efx_mdio_check_mmds(efx, efx->phy_op->mmds, 0);
 		if (rc)
 			goto out;
 	}
 
 out:
 	mutex_unlock(&efx->mac_lock);
-	tests->mii = rc ? -1 : 1;
+	tests->mdio = rc ? -1 : 1;
 	return rc;
 }
 
@@ -439,6 +438,7 @@ static int efx_begin_loopback(struct efx_tx_queue *tx_queue)
 			kfree_skb(skb);
 			return -EPIPE;
 		}
+		efx->net_dev->trans_start = jiffies;
 	}
 
 	return 0;
@@ -673,7 +673,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
 	/* Online (i.e. non-disruptive) testing
 	 * This checks interrupt generation, event delivery and PHY presence. */
 
-	rc = efx_test_mii(efx, tests);
+	rc = efx_test_mdio(efx, tests);
 	if (rc && !rc_test)
 		rc_test = rc;
 
diff --git a/drivers/net/sfc/selftest.h b/drivers/net/sfc/selftest.h
index 39451cf938c..f6feee04c96 100644
--- a/drivers/net/sfc/selftest.h
+++ b/drivers/net/sfc/selftest.h
@@ -32,7 +32,7 @@ struct efx_loopback_self_tests {
  */
 struct efx_self_tests {
 	/* online tests */
-	int mii;
+	int mdio;
 	int nvram;
 	int interrupt;
 	int eventq_dma[EFX_MAX_CHANNELS];
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 4eac5da81e5..cee00ad49b5 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -296,7 +296,6 @@ static int sfe4001_check_hw(struct efx_nic *efx)
 
 static struct i2c_board_info sfe4001_hwmon_info = {
 	I2C_BOARD_INFO("max6647", 0x4e),
-	.irq		= -1,
 };
 
 /* This board uses an I2C expander to provider power to the PHY, which needs to
@@ -389,12 +388,10 @@ static void sfn4111t_fini(struct efx_nic *efx)
 
 static struct i2c_board_info sfn4111t_a0_hwmon_info = {
 	I2C_BOARD_INFO("max6647", 0x4e),
-	.irq		= -1,
 };
 
 static struct i2c_board_info sfn4111t_r5_hwmon_info = {
 	I2C_BOARD_INFO("max6646", 0x4d),
-	.irq		= -1,
 };
 
 int sfn4111t_init(struct efx_nic *efx)
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index e61dc4d4741..f4d509015f7 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -23,10 +23,10 @@
  * clause 22 extension MMD, but since it doesn't have all the generic
  * MMD registers it is pointless to include it here.
  */
-#define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS_PMAPMD	| \
-				 MDIO_MMDREG_DEVS_PCS		| \
-				 MDIO_MMDREG_DEVS_PHYXS		| \
-				 MDIO_MMDREG_DEVS_AN)
+#define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD	| \
+				 MDIO_DEVS_PCS		| \
+				 MDIO_DEVS_PHYXS	| \
+				 MDIO_DEVS_AN)
 
 #define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) |	\
 			   (1 << LOOPBACK_PCS) |	\
@@ -44,18 +44,6 @@
  */
 #define MAX_BAD_LP_TRIES	(5)
 
-/* LASI Control */
-#define PMA_PMD_LASI_CTRL	36866
-#define PMA_PMD_LASI_STATUS	36869
-#define PMA_PMD_LS_ALARM_LBN	0
-#define PMA_PMD_LS_ALARM_WIDTH	1
-#define PMA_PMD_TX_ALARM_LBN	1
-#define PMA_PMD_TX_ALARM_WIDTH	1
-#define PMA_PMD_RX_ALARM_LBN	2
-#define PMA_PMD_RX_ALARM_WIDTH	1
-#define PMA_PMD_AN_ALARM_LBN	3
-#define PMA_PMD_AN_ALARM_WIDTH	1
-
 /* Extended control register */
 #define PMA_PMD_XCONTROL_REG	49152
 #define PMA_PMD_EXT_GMII_EN_LBN	1
@@ -75,6 +63,7 @@
 
 /* extended status register */
 #define PMA_PMD_XSTATUS_REG	49153
+#define PMA_PMD_XSTAT_MDIX_LBN	14
 #define PMA_PMD_XSTAT_FLP_LBN   (12)
 
 /* LED control register */
@@ -153,10 +142,6 @@
 #define LOOPBACK_NEAR_LBN   (8)
 #define LOOPBACK_NEAR_WIDTH (1)
 
-#define PCS_10GBASET_STAT1       32
-#define PCS_10GBASET_BLKLK_LBN   0
-#define PCS_10GBASET_BLKLK_WIDTH 1
-
 /* Boot status register */
 #define PCS_BOOT_STATUS_REG		53248
 #define PCS_BOOT_FATAL_ERROR_LBN	0
@@ -206,10 +191,8 @@ static ssize_t show_phy_short_reach(struct device *dev,
 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 	int reg;
 
-	reg = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-				 MDIO_PMAPMD_10GBT_TXPWR);
-	return sprintf(buf, "%d\n",
-		       !!(reg & (1 << MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN)));
+	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR);
+	return sprintf(buf, "%d\n", !!(reg & MDIO_PMA_10GBT_TXPWR_SHORT));
 }
 
 static ssize_t set_phy_short_reach(struct device *dev,
@@ -219,10 +202,9 @@ static ssize_t set_phy_short_reach(struct device *dev,
 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
 
 	rtnl_lock();
-	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			       MDIO_PMAPMD_10GBT_TXPWR,
-			       MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN,
-			       count != 0 && *buf != '0');
+	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
+			  MDIO_PMA_10GBT_TXPWR_SHORT,
+			  count != 0 && *buf != '0');
 	efx_reconfigure_port(efx);
 	rtnl_unlock();
 
@@ -238,9 +220,8 @@ int sft9001_wait_boot(struct efx_nic *efx)
 	int boot_stat;
 
 	for (;;) {
-		boot_stat = mdio_clause45_read(efx, efx->mii.phy_id,
-					       MDIO_MMD_PCS,
-					       PCS_BOOT_STATUS_REG);
+		boot_stat = efx_mdio_read(efx, MDIO_MMD_PCS,
+					  PCS_BOOT_STATUS_REG);
 		if (boot_stat >= 0) {
 			EFX_LOG(efx, "PHY boot status = %#x\n", boot_stat);
 			switch (boot_stat &
@@ -286,38 +267,32 @@ int sft9001_wait_boot(struct efx_nic *efx)
 
 static int tenxpress_init(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
 	int reg;
 
 	if (efx->phy_type == PHY_TYPE_SFX7101) {
 		/* Enable 312.5 MHz clock */
-		mdio_clause45_write(efx, phy_id,
-				    MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
-				    1 << CLK312_EN_LBN);
+		efx_mdio_write(efx, MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
+			       1 << CLK312_EN_LBN);
 	} else {
 		/* Enable 312.5 MHz clock and GMII */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 PMA_PMD_XCONTROL_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
 		reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
 			(1 << PMA_PMD_EXT_CLK_OUT_LBN) |
 			(1 << PMA_PMD_EXT_CLK312_LBN) |
 			(1 << PMA_PMD_EXT_ROBUST_LBN));
 
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-				    PMA_PMD_XCONTROL_REG, reg);
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-				       GPHY_XCONTROL_REG, GPHY_ISOLATE_LBN,
-				       false);
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
+		efx_mdio_set_flag(efx, MDIO_MMD_C22EXT,
+			      GPHY_XCONTROL_REG, 1 << GPHY_ISOLATE_LBN,
+			      false);
 	}
 
 	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
 	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
-				       PMA_PMD_LED_CTRL_REG,
-				       PMA_PMA_LED_ACTIVITY_LBN,
-				       true);
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-				    PMA_PMD_LED_OVERR_REG, PMA_PMD_LED_DEFAULT);
+		efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG,
+				  1 << PMA_PMA_LED_ACTIVITY_LBN, true);
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG,
+			       PMA_PMD_LED_DEFAULT);
 	}
 
 	return 0;
@@ -337,22 +312,19 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
 		if (efx->phy_type == PHY_TYPE_SFT9001A) {
 			int reg;
-			reg = mdio_clause45_read(efx, efx->mii.phy_id,
-						 MDIO_MMD_PMAPMD,
-						 PMA_PMD_XCONTROL_REG);
+			reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+					    PMA_PMD_XCONTROL_REG);
 			reg |= (1 << PMA_PMD_EXT_SSR_LBN);
-			mdio_clause45_write(efx, efx->mii.phy_id,
-					    MDIO_MMD_PMAPMD,
-					    PMA_PMD_XCONTROL_REG, reg);
+			efx_mdio_write(efx, MDIO_MMD_PMAPMD,
+				       PMA_PMD_XCONTROL_REG, reg);
 			mdelay(200);
 		}
 
-		rc = mdio_clause45_wait_reset_mmds(efx,
-						   TENXPRESS_REQUIRED_DEVS);
+		rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 		if (rc < 0)
 			goto fail;
 
-		rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
+		rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
 		if (rc < 0)
 			goto fail;
 	}
@@ -360,7 +332,6 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 	rc = tenxpress_init(efx);
 	if (rc < 0)
 		goto fail;
-	mdio_clause45_set_pause(efx);
 
 	if (efx->phy_type == PHY_TYPE_SFT9001B) {
 		rc = device_create_file(&efx->pci_dev->dev,
@@ -395,17 +366,14 @@ static int tenxpress_special_reset(struct efx_nic *efx)
 	efx_stats_disable(efx);
 
 	/* Initiate reset */
-	reg = mdio_clause45_read(efx, efx->mii.phy_id,
-				 MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
+	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
 	reg |= (1 << PMA_PMD_EXT_SSR_LBN);
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_XCONTROL_REG, reg);
+	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
 
 	mdelay(200);
 
 	/* Wait for the blocks to come out of reset */
-	rc = mdio_clause45_wait_reset_mmds(efx,
-					   TENXPRESS_REQUIRED_DEVS);
+	rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 	if (rc < 0)
 		goto out;
 
@@ -424,7 +392,6 @@ out:
 static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 {
 	struct tenxpress_phy_data *pd = efx->phy_data;
-	int phy_id = efx->mii.phy_id;
 	bool bad_lp;
 	int reg;
 
@@ -432,11 +399,10 @@ static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 		bad_lp = false;
 	} else {
 		/* Check that AN has started but not completed. */
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-					 MDIO_AN_STATUS);
-		if (!(reg & (1 << MDIO_AN_STATUS_LP_AN_CAP_LBN)))
+		reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_STAT1);
+		if (!(reg & MDIO_AN_STAT1_LPABLE))
 			return; /* LP status is unknown */
-		bad_lp = !(reg & (1 << MDIO_AN_STATUS_AN_DONE_LBN));
+		bad_lp = !(reg & MDIO_AN_STAT1_COMPLETE);
 		if (bad_lp)
 			pd->bad_lp_tries++;
 	}
@@ -448,8 +414,8 @@ static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 	/* Use the RX (red) LED as an error indicator once we've seen AN
 	 * failure several times in a row, and also log a message. */
 	if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-					 PMA_PMD_LED_OVERR_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+				    PMA_PMD_LED_OVERR_REG);
 		reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN);
 		if (!bad_lp) {
 			reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN;
@@ -460,23 +426,22 @@ static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
 				" supports 10GBASE-T ONLY, so no link can"
 				" be established\n");
 		}
-		mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-				    PMA_PMD_LED_OVERR_REG, reg);
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD,
+			       PMA_PMD_LED_OVERR_REG, reg);
 		pd->bad_lp_tries = bad_lp;
 	}
 }
 
 static bool sfx7101_link_ok(struct efx_nic *efx)
 {
-	return mdio_clause45_links_ok(efx,
-				      MDIO_MMDREG_DEVS_PMAPMD |
-				      MDIO_MMDREG_DEVS_PCS |
-				      MDIO_MMDREG_DEVS_PHYXS);
+	return efx_mdio_links_ok(efx,
+				 MDIO_DEVS_PMAPMD |
+				 MDIO_DEVS_PCS |
+				 MDIO_DEVS_PHYXS);
 }
 
 static bool sft9001_link_ok(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
 	u32 reg;
 
 	if (efx_phy_mode_disabled(efx->phy_mode))
@@ -484,50 +449,43 @@ static bool sft9001_link_ok(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	else if (efx->loopback_mode == LOOPBACK_GPHY)
 		return true;
 	else if (efx->loopback_mode)
-		return mdio_clause45_links_ok(efx,
-					      MDIO_MMDREG_DEVS_PMAPMD |
-					      MDIO_MMDREG_DEVS_PHYXS);
+		return efx_mdio_links_ok(efx,
+					 MDIO_DEVS_PMAPMD |
+					 MDIO_DEVS_PHYXS);
 
 	/* We must use the same definition of link state as LASI,
 	 * otherwise we can miss a link state transition
 	 */
 	if (ecmd->speed == 10000) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
-					 PCS_10GBASET_STAT1);
-		return reg & (1 << PCS_10GBASET_BLKLK_LBN);
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT1);
+		return reg & MDIO_PCS_10GBRT_STAT1_BLKLK;
 	} else {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 C22EXT_STATUS_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_STATUS_REG);
 		return reg & (1 << C22EXT_STATUS_LINK_LBN);
 	}
 }
 
 static void tenxpress_ext_loopback(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
-
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS,
-			       PHYXS_TEST1, LOOPBACK_NEAR_LBN,
-			       efx->loopback_mode == LOOPBACK_PHYXS);
+	efx_mdio_set_flag(efx, MDIO_MMD_PHYXS, PHYXS_TEST1,
+			  1 << LOOPBACK_NEAR_LBN,
+			  efx->loopback_mode == LOOPBACK_PHYXS);
 	if (efx->phy_type != PHY_TYPE_SFX7101)
-		mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-				       GPHY_XCONTROL_REG,
-				       GPHY_LOOPBACK_NEAR_LBN,
-				       efx->loopback_mode == LOOPBACK_GPHY);
+		efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, GPHY_XCONTROL_REG,
+				  1 << GPHY_LOOPBACK_NEAR_LBN,
+				  efx->loopback_mode == LOOPBACK_GPHY);
 }
 
 static void tenxpress_low_power(struct efx_nic *efx)
 {
-	int phy_id = efx->mii.phy_id;
-
 	if (efx->phy_type == PHY_TYPE_SFX7101)
-		mdio_clause45_set_mmds_lpower(
+		efx_mdio_set_mmds_lpower(
 			efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
 			TENXPRESS_REQUIRED_DEVS);
 	else
-		mdio_clause45_set_flag(
-			efx, phy_id, MDIO_MMD_PMAPMD,
-			PMA_PMD_XCONTROL_REG, PMA_PMD_EXT_LPOWER_LBN,
+		efx_mdio_set_flag(
+			efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG,
+			1 << PMA_PMD_EXT_LPOWER_LBN,
 			!!(efx->phy_mode & PHY_MODE_LOW_POWER));
 }
 
@@ -568,8 +526,8 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 		WARN_ON(rc);
 	}
 
-	mdio_clause45_transmit_disable(efx);
-	mdio_clause45_phy_reconfigure(efx);
+	efx_mdio_transmit_disable(efx);
+	efx_mdio_phy_reconfigure(efx);
 	tenxpress_ext_loopback(efx);
 
 	phy_data->loopback_mode = efx->loopback_mode;
@@ -585,7 +543,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx)
 		efx->link_fd = ecmd.duplex == DUPLEX_FULL;
 		efx->link_up = sft9001_link_ok(efx, &ecmd);
 	}
-	efx->link_fc = mdio_clause45_get_pause(efx);
+	efx->link_fc = efx_mdio_get_pause(efx);
 }
 
 /* Poll PHY for interrupt */
@@ -599,7 +557,7 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 		if (link_ok != efx->link_up) {
 			change = true;
 		} else {
-			unsigned int link_fc = mdio_clause45_get_pause(efx);
+			unsigned int link_fc = efx_mdio_get_pause(efx);
 			if (link_fc != efx->link_fc)
 				change = true;
 		}
@@ -609,10 +567,9 @@ static void tenxpress_phy_poll(struct efx_nic *efx)
 		if (link_ok != efx->link_up)
 			change = true;
 	} else {
-		u32 status = mdio_clause45_read(efx, efx->mii.phy_id,
-						MDIO_MMD_PMAPMD,
-						PMA_PMD_LASI_STATUS);
-		if (status & (1 << PMA_PMD_LS_ALARM_LBN))
+		int status = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+					   MDIO_PMA_LASI_STAT);
+		if (status & MDIO_PMA_LASI_LSALARM)
 			change = true;
 	}
 
@@ -634,8 +591,7 @@ static void tenxpress_phy_fini(struct efx_nic *efx)
 	if (efx->phy_type == PHY_TYPE_SFX7101) {
 		/* Power down the LNPGA */
 		reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
-		mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-				    PMA_PMD_XCONTROL_REG, reg);
+		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
 
 		/* Waiting here ensures that the board fini, which can turn
 		 * off the power to the PHY, won't get run until the LNPGA
@@ -661,8 +617,7 @@ void tenxpress_phy_blink(struct efx_nic *efx, bool blink)
 	else
 		reg = PMA_PMD_LED_DEFAULT;
 
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_LED_OVERR_REG, reg);
+	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg);
 }
 
 static const char *const sfx7101_test_names[] = {
@@ -698,7 +653,6 @@ static const char *const sft9001_test_names[] = {
 static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 {
 	struct ethtool_cmd ecmd;
-	int phy_id = efx->mii.phy_id;
 	int rc = 0, rc2, i, ctrl_reg, res_reg;
 
 	if (flags & ETH_TEST_FL_OFFLINE)
@@ -717,11 +671,10 @@ static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 		 * must reset the PHY to resume normal service. */
 		ctrl_reg |= (1 << CDIAG_CTRL_BRK_LINK_LBN);
 	}
-	mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-			    PMA_PMD_CDIAG_CTRL_REG, ctrl_reg);
+	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_CTRL_REG,
+		       ctrl_reg);
 	i = 0;
-	while (mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				  PMA_PMD_CDIAG_CTRL_REG) &
+	while (efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_CTRL_REG) &
 	       (1 << CDIAG_CTRL_IN_PROG_LBN)) {
 		if (++i == 50) {
 			rc = -ETIMEDOUT;
@@ -729,15 +682,13 @@ static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 		}
 		msleep(100);
 	}
-	res_reg = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-				     PMA_PMD_CDIAG_RES_REG);
+	res_reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_CDIAG_RES_REG);
 	for (i = 0; i < 4; i++) {
 		int pair_res =
 			(res_reg >> (CDIAG_RES_A_LBN - i * CDIAG_RES_WIDTH))
 			& ((1 << CDIAG_RES_WIDTH) - 1);
-		int len_reg = mdio_clause45_read(efx, efx->mii.phy_id,
-						 MDIO_MMD_PMAPMD,
-						 PMA_PMD_CDIAG_LEN_REG + i);
+		int len_reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+					    PMA_PMD_CDIAG_LEN_REG + i);
 		if (pair_res == CDIAG_RES_OK)
 			results[1 + i] = 1;
 		else if (pair_res == CDIAG_RES_INVALID)
@@ -769,36 +720,39 @@ out:
 static void
 tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
-	int phy_id = efx->mii.phy_id;
 	u32 adv = 0, lpa = 0;
 	int reg;
 
 	if (efx->phy_type != PHY_TYPE_SFX7101) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 C22EXT_MSTSLV_CTRL);
+		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_CTRL);
 		if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
 			adv |= ADVERTISED_1000baseT_Full;
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
-					 C22EXT_MSTSLV_STATUS);
+		reg = efx_mdio_read(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_STATUS);
 		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
 			lpa |= ADVERTISED_1000baseT_Half;
 		if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
 			lpa |= ADVERTISED_1000baseT_Full;
 	}
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-				 MDIO_AN_10GBT_CTRL);
-	if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN))
+	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL);
+	if (reg & MDIO_AN_10GBT_CTRL_ADV10G)
 		adv |= ADVERTISED_10000baseT_Full;
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
-				 MDIO_AN_10GBT_STATUS);
-	if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
+	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
+	if (reg & MDIO_AN_10GBT_STAT_LP10G)
 		lpa |= ADVERTISED_10000baseT_Full;
 
-	mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa);
+	mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa);
 
-	if (efx->phy_type != PHY_TYPE_SFX7101)
+	if (efx->phy_type != PHY_TYPE_SFX7101) {
 		ecmd->supported |= (SUPPORTED_100baseT_Full |
 				    SUPPORTED_1000baseT_Full);
+		if (ecmd->speed != SPEED_10000) {
+			ecmd->eth_tp_mdix =
+				(efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+					       PMA_PMD_XSTATUS_REG) &
+				 (1 << PMA_PMD_XSTAT_MDIX_LBN))
+				? ETH_TP_MDI_X : ETH_TP_MDI;
+		}
+	}
 
 	/* In loopback, the PHY automatically brings up the correct interface,
 	 * but doesn't advertise the correct speed. So override it */
@@ -813,29 +767,24 @@ static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 	if (!ecmd->autoneg)
 		return -EINVAL;
 
-	return mdio_clause45_set_settings(efx, ecmd);
+	return efx_mdio_set_settings(efx, ecmd);
 }
 
 static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
-			       MDIO_AN_10GBT_CTRL,
-			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
-			       advertising & ADVERTISED_10000baseT_Full);
+	efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+			  MDIO_AN_10GBT_CTRL_ADV10G,
+			  advertising & ADVERTISED_10000baseT_Full);
 }
 
 static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
 {
-	int phy_id = efx->mii.phy_id;
-
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
-			       C22EXT_MSTSLV_CTRL,
-			       C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
-			       advertising & ADVERTISED_1000baseT_Full);
-	mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
-			       MDIO_AN_10GBT_CTRL,
-			       MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
-			       advertising & ADVERTISED_10000baseT_Full);
+	efx_mdio_set_flag(efx, MDIO_MMD_C22EXT, C22EXT_MSTSLV_CTRL,
+			  1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
+			  advertising & ADVERTISED_1000baseT_Full);
+	efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+			  MDIO_AN_10GBT_CTRL_ADV10G,
+			  advertising & ADVERTISED_10000baseT_Full);
 }
 
 struct efx_phy_operations falcon_sfx7101_phy_ops = {
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index d6681edb701..14a14788566 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -360,13 +360,6 @@ inline int efx_xmit(struct efx_nic *efx,
 
 	/* Map fragments for DMA and add to TX queue */
 	rc = efx_enqueue_skb(tx_queue, skb);
-	if (unlikely(rc != NETDEV_TX_OK))
-		goto out;
-
-	/* Update last TX timer */
-	efx->net_dev->trans_start = jiffies;
-
- out:
 	return rc;
 }
 
diff --git a/drivers/net/sfc/xenpack.h b/drivers/net/sfc/xenpack.h
deleted file mode 100644
index b0d1f225b70..00000000000
--- a/drivers/net/sfc/xenpack.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_XENPACK_H
-#define EFX_XENPACK_H
-
-/* Exported functions from Xenpack standard PHY control */
-
-#include "mdio_10g.h"
-
-/****************************************************************************/
-/* XENPACK MDIO register extensions */
-#define MDIO_XP_LASI_RX_CTRL	(0x9000)
-#define MDIO_XP_LASI_TX_CTRL	(0x9001)
-#define MDIO_XP_LASI_CTRL	(0x9002)
-#define MDIO_XP_LASI_RX_STAT	(0x9003)
-#define MDIO_XP_LASI_TX_STAT	(0x9004)
-#define MDIO_XP_LASI_STAT	(0x9005)
-
-/* Control/Status bits */
-#define XP_LASI_LS_ALARM	(1 << 0)
-#define XP_LASI_TX_ALARM	(1 << 1)
-#define XP_LASI_RX_ALARM	(1 << 2)
-/* These two are Quake vendor extensions to the standard XENPACK defines */
-#define XP_LASI_LS_INTB		(1 << 3)
-#define XP_LASI_TEST		(1 << 7)
-
-/* Enable LASI interrupts for PHY */
-static inline void xenpack_enable_lasi_irqs(struct efx_nic *efx)
-{
-	int reg;
-	int phy_id = efx->mii.phy_id;
-	/* Read to clear LASI status register */
-	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
-				 MDIO_XP_LASI_STAT);
-
-	mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
-			    MDIO_XP_LASI_CTRL, XP_LASI_LS_ALARM);
-}
-
-/* Read the LASI interrupt status to clear the interrupt. */
-static inline int xenpack_clear_lasi_irqs(struct efx_nic *efx)
-{
-	/* Read to clear link status alarm */
-	return mdio_clause45_read(efx, efx->mii.phy_id,
-				  MDIO_MMD_PMAPMD, MDIO_XP_LASI_STAT);
-}
-
-/* Turn off LASI interrupts */
-static inline void xenpack_disable_lasi_irqs(struct efx_nic *efx)
-{
-	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			    MDIO_XP_LASI_CTRL, 0);
-}
-
-#endif /* EFX_XENPACK_H */
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index bb1ef77d5f5..bb2e6afd082 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -15,13 +15,12 @@
 #include <linux/delay.h>
 #include "efx.h"
 #include "mdio_10g.h"
-#include "xenpack.h"
 #include "phy.h"
 #include "falcon.h"
 
-#define XFP_REQUIRED_DEVS (MDIO_MMDREG_DEVS_PCS |	\
-			   MDIO_MMDREG_DEVS_PMAPMD |	\
-			   MDIO_MMDREG_DEVS_PHYXS)
+#define XFP_REQUIRED_DEVS (MDIO_DEVS_PCS |	\
+			   MDIO_DEVS_PMAPMD |	\
+			   MDIO_DEVS_PHYXS)
 
 #define XFP_LOOPBACKS ((1 << LOOPBACK_PCS) |		\
 		       (1 << LOOPBACK_PMAPMD) |		\
@@ -49,8 +48,7 @@
 void xfp_set_led(struct efx_nic *p, int led, int mode)
 {
 	int addr = MDIO_QUAKE_LED0_REG + led;
-	mdio_clause45_write(p, p->mii.phy_id, MDIO_MMD_PMAPMD, addr,
-			    mode);
+	efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
 }
 
 struct xfp_phy_data {
@@ -63,14 +61,12 @@ struct xfp_phy_data {
 static int qt2025c_wait_reset(struct efx_nic *efx)
 {
 	unsigned long timeout = jiffies + 10 * HZ;
-	int phy_id = efx->mii.phy_id;
 	int reg, old_counter = 0;
 
 	/* Wait for firmware heartbeat to start */
 	for (;;) {
 		int counter;
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
-					 PCS_FW_HEARTBEAT_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
 		if (reg < 0)
 			return reg;
 		counter = ((reg >> PCS_FW_HEARTB_LBN) &
@@ -86,8 +82,7 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
 
 	/* Wait for firmware status to look good */
 	for (;;) {
-		reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
-					 PCS_UC8051_STATUS_REG);
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
 		if (reg < 0)
 			return reg;
 		if ((reg &
@@ -109,9 +104,9 @@ static int xfp_reset_phy(struct efx_nic *efx)
 {
 	int rc;
 
-	rc = mdio_clause45_reset_mmd(efx, MDIO_MMD_PHYXS,
-				     XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
-				     XFP_RESET_WAIT);
+	rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
+				XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
+				XFP_RESET_WAIT);
 	if (rc < 0)
 		goto fail;
 
@@ -126,8 +121,7 @@ static int xfp_reset_phy(struct efx_nic *efx)
 
 	/* Check that all the MMDs we expect are present and responding. We
 	 * expect faults on some if the link is down, but not on the PHY XS */
-	rc = mdio_clause45_check_mmds(efx, XFP_REQUIRED_DEVS,
-				      MDIO_MMDREG_DEVS_PHYXS);
+	rc = efx_mdio_check_mmds(efx, XFP_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
 	if (rc < 0)
 		goto fail;
 
@@ -143,7 +137,7 @@ static int xfp_reset_phy(struct efx_nic *efx)
 static int xfp_phy_init(struct efx_nic *efx)
 {
 	struct xfp_phy_data *phy_data;
-	u32 devid = mdio_clause45_read_id(efx, MDIO_MMD_PHYXS);
+	u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
 	int rc;
 
 	phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
@@ -152,8 +146,8 @@ static int xfp_phy_init(struct efx_nic *efx)
 	efx->phy_data = phy_data;
 
 	EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
-		 devid, mdio_id_oui(devid), mdio_id_model(devid),
-		 mdio_id_rev(devid));
+		 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
+		 efx_mdio_id_rev(devid));
 
 	phy_data->phy_mode = efx->phy_mode;
 
@@ -174,12 +168,13 @@ static int xfp_phy_init(struct efx_nic *efx)
 
 static void xfp_phy_clear_interrupt(struct efx_nic *efx)
 {
-	xenpack_clear_lasi_irqs(efx);
+	/* Read to clear link status alarm */
+	efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT);
 }
 
 static int xfp_link_ok(struct efx_nic *efx)
 {
-	return mdio_clause45_links_ok(efx, XFP_REQUIRED_DEVS);
+	return efx_mdio_links_ok(efx, XFP_REQUIRED_DEVS);
 }
 
 static void xfp_phy_poll(struct efx_nic *efx)
@@ -200,9 +195,9 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
 		 * or optical transceivers, varying somewhat between
 		 * firmware versions.  Only 'static mode' appears to
 		 * cover everything. */
-		mdio_clause45_set_flag(
-			efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-			PMA_PMD_FTX_CTRL2_REG, PMA_PMD_FTX_STATIC_LBN,
+		mdio_set_flag(
+			&efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
+			PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
 			efx->phy_mode & PHY_MODE_TX_DISABLED ||
 			efx->phy_mode & PHY_MODE_LOW_POWER ||
 			efx->loopback_mode == LOOPBACK_PCS ||
@@ -213,10 +208,10 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
 		    (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
 			xfp_reset_phy(efx);
 
-		mdio_clause45_transmit_disable(efx);
+		efx_mdio_transmit_disable(efx);
 	}
 
-	mdio_clause45_phy_reconfigure(efx);
+	efx_mdio_phy_reconfigure(efx);
 
 	phy_data->phy_mode = efx->phy_mode;
 	efx->link_up = xfp_link_ok(efx);
@@ -225,6 +220,10 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
 	efx->link_fc = efx->wanted_fc;
 }
 
+static void xfp_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	mdio45_ethtool_gset(&efx->mdio, ecmd);
+}
 
 static void xfp_phy_fini(struct efx_nic *efx)
 {
@@ -243,8 +242,8 @@ struct efx_phy_operations falcon_xfp_phy_ops = {
 	.poll            = xfp_phy_poll,
 	.fini            = xfp_phy_fini,
 	.clear_interrupt = xfp_phy_clear_interrupt,
-	.get_settings    = mdio_clause45_get_settings,
-	.set_settings	 = mdio_clause45_set_settings,
+	.get_settings    = xfp_phy_get_settings,
+	.set_settings	 = efx_mdio_set_settings,
 	.mmds            = XFP_REQUIRED_DEVS,
 	.loopbacks       = XFP_LOOPBACKS,
 };
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 97d68560067..5fb88ca6dd7 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -709,6 +709,17 @@ static inline void setup_rx_ring(struct net_device *dev,
 	dma_sync_desc_dev(dev, &buf[i]);
 }
 
+static const struct net_device_ops sgiseeq_netdev_ops = {
+	.ndo_open		= sgiseeq_open,
+	.ndo_stop		= sgiseeq_close,
+	.ndo_start_xmit		= sgiseeq_start_xmit,
+	.ndo_tx_timeout		= timeout,
+	.ndo_set_multicast_list	= sgiseeq_set_multicast,
+	.ndo_set_mac_address	= sgiseeq_set_mac_address,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init sgiseeq_probe(struct platform_device *pdev)
 {
 	struct sgiseeq_platform_data *pd = pdev->dev.platform_data;
@@ -775,13 +786,8 @@ static int __init sgiseeq_probe(struct platform_device *pdev)
 			      SEEQ_CTRL_SFLAG | SEEQ_CTRL_ESHORT |
 			      SEEQ_CTRL_ENCARR;
 
-	dev->open		= sgiseeq_open;
-	dev->stop		= sgiseeq_close;
-	dev->hard_start_xmit	= sgiseeq_start_xmit;
-	dev->tx_timeout		= timeout;
+	dev->netdev_ops		= &sgiseeq_netdev_ops;
 	dev->watchdog_timeo	= (200 * HZ) / 1000;
-	dev->set_multicast_list	= sgiseeq_set_multicast;
-	dev->set_mac_address	= sgiseeq_set_mac_address;
 	dev->irq		= irq;
 
 	if (register_netdev(dev)) {
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 3ab28bb00c1..341882f959f 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -2,7 +2,7 @@
  *  SuperH Ethernet device driver
  *
  *  Copyright (C) 2006-2008 Nobuhiro Iwamatsu
- *  Copyright (C) 2008 Renesas Solutions Corp.
+ *  Copyright (C) 2008-2009 Renesas Solutions Corp.
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms and conditions of the GNU General Public License,
@@ -33,6 +33,226 @@
 
 #include "sh_eth.h"
 
+/* There is CPU dependent code */
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define SH_ETH_RESET_DEFAULT	1
+static void sh_eth_set_duplex(struct net_device *ndev)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	u32 ioaddr = ndev->base_addr;
+
+	if (mdp->duplex) /* Full */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
+	else		/* Half */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
+}
+
+static void sh_eth_set_rate(struct net_device *ndev)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	u32 ioaddr = ndev->base_addr;
+
+	switch (mdp->speed) {
+	case 10: /* 10BASE */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_RTM, ioaddr + ECMR);
+		break;
+	case 100:/* 100BASE */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_RTM, ioaddr + ECMR);
+		break;
+	default:
+		break;
+	}
+}
+
+/* SH7724 */
+static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
+	.set_duplex	= sh_eth_set_duplex,
+	.set_rate	= sh_eth_set_rate,
+
+	.ecsr_value	= ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
+	.ecsipr_value	= ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,
+	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x01ff009f,
+
+	.tx_check	= EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
+	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE |
+			  EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI,
+	.tx_error_check	= EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE,
+
+	.apr		= 1,
+	.mpr		= 1,
+	.tpauser	= 1,
+	.hw_swap	= 1,
+};
+
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+#define SH_ETH_HAS_TSU	1
+static void sh_eth_chip_reset(struct net_device *ndev)
+{
+	/* reset device */
+	ctrl_outl(ARSTR_ARSTR, ARSTR);
+	mdelay(1);
+}
+
+static void sh_eth_reset(struct net_device *ndev)
+{
+	u32 ioaddr = ndev->base_addr;
+	int cnt = 100;
+
+	ctrl_outl(EDSR_ENALL, ioaddr + EDSR);
+	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+	while (cnt > 0) {
+		if (!(ctrl_inl(ioaddr + EDMR) & 0x3))
+			break;
+		mdelay(1);
+		cnt--;
+	}
+	if (cnt < 0)
+		printk(KERN_ERR "Device reset fail\n");
+
+	/* Table Init */
+	ctrl_outl(0x0, ioaddr + TDLAR);
+	ctrl_outl(0x0, ioaddr + TDFAR);
+	ctrl_outl(0x0, ioaddr + TDFXR);
+	ctrl_outl(0x0, ioaddr + TDFFR);
+	ctrl_outl(0x0, ioaddr + RDLAR);
+	ctrl_outl(0x0, ioaddr + RDFAR);
+	ctrl_outl(0x0, ioaddr + RDFXR);
+	ctrl_outl(0x0, ioaddr + RDFFR);
+}
+
+static void sh_eth_set_duplex(struct net_device *ndev)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	u32 ioaddr = ndev->base_addr;
+
+	if (mdp->duplex) /* Full */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
+	else		/* Half */
+		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
+}
+
+static void sh_eth_set_rate(struct net_device *ndev)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	u32 ioaddr = ndev->base_addr;
+
+	switch (mdp->speed) {
+	case 10: /* 10BASE */
+		ctrl_outl(GECMR_10, ioaddr + GECMR);
+		break;
+	case 100:/* 100BASE */
+		ctrl_outl(GECMR_100, ioaddr + GECMR);
+		break;
+	case 1000: /* 1000BASE */
+		ctrl_outl(GECMR_1000, ioaddr + GECMR);
+		break;
+	default:
+		break;
+	}
+}
+
+/* sh7763 */
+static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
+	.chip_reset	= sh_eth_chip_reset,
+	.set_duplex	= sh_eth_set_duplex,
+	.set_rate	= sh_eth_set_rate,
+
+	.ecsr_value	= ECSR_ICD | ECSR_MPD,
+	.ecsipr_value	= ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
+	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+
+	.tx_check	= EESR_TC1 | EESR_FTC,
+	.eesr_err_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | \
+			  EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | \
+			  EESR_ECI,
+	.tx_error_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_TDE | \
+			  EESR_TFE,
+
+	.apr		= 1,
+	.mpr		= 1,
+	.tpauser	= 1,
+	.bculr		= 1,
+	.hw_swap	= 1,
+	.rpadir		= 1,
+	.no_trimd	= 1,
+	.no_ade		= 1,
+};
+
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define SH_ETH_RESET_DEFAULT	1
+static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
+	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+
+	.apr		= 1,
+	.mpr		= 1,
+	.tpauser	= 1,
+	.hw_swap	= 1,
+};
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+#define SH_ETH_RESET_DEFAULT	1
+#define SH_ETH_HAS_TSU	1
+static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
+	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
+};
+#endif
+
+static void sh_eth_set_default_cpu_data(struct sh_eth_cpu_data *cd)
+{
+	if (!cd->ecsr_value)
+		cd->ecsr_value = DEFAULT_ECSR_INIT;
+
+	if (!cd->ecsipr_value)
+		cd->ecsipr_value = DEFAULT_ECSIPR_INIT;
+
+	if (!cd->fcftr_value)
+		cd->fcftr_value = DEFAULT_FIFO_F_D_RFF | \
+				  DEFAULT_FIFO_F_D_RFD;
+
+	if (!cd->fdr_value)
+		cd->fdr_value = DEFAULT_FDR_INIT;
+
+	if (!cd->rmcr_value)
+		cd->rmcr_value = DEFAULT_RMCR_VALUE;
+
+	if (!cd->tx_check)
+		cd->tx_check = DEFAULT_TX_CHECK;
+
+	if (!cd->eesr_err_check)
+		cd->eesr_err_check = DEFAULT_EESR_ERR_CHECK;
+
+	if (!cd->tx_error_check)
+		cd->tx_error_check = DEFAULT_TX_ERROR_CHECK;
+}
+
+#if defined(SH_ETH_RESET_DEFAULT)
+/* Chip Reset */
+static void sh_eth_reset(struct net_device *ndev)
+{
+	u32 ioaddr = ndev->base_addr;
+
+	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+	mdelay(3);
+	ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
+}
+#endif
+
+#if defined(CONFIG_CPU_SH4)
+static void sh_eth_set_receive_align(struct sk_buff *skb)
+{
+	int reserve;
+
+	reserve = SH4_SKB_RX_ALIGN - ((u32)skb->data & (SH4_SKB_RX_ALIGN - 1));
+	if (reserve)
+		skb_reserve(skb, reserve);
+}
+#else
+static void sh_eth_set_receive_align(struct sk_buff *skb)
+{
+	skb_reserve(skb, SH2_SH3_SKB_RX_ALIGN);
+}
+#endif
+
+
 /* CPU <-> EDMAC endian convert */
 static inline __u32 cpu_to_edmac(struct sh_eth_private *mdp, u32 x)
 {
@@ -165,41 +385,6 @@ static struct mdiobb_ops bb_ops = {
 	.get_mdio_data = sh_get_mdio,
 };
 
-/* Chip Reset */
-static void sh_eth_reset(struct net_device *ndev)
-{
-	u32 ioaddr = ndev->base_addr;
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	int cnt = 100;
-
-	ctrl_outl(EDSR_ENALL, ioaddr + EDSR);
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
-	while (cnt > 0) {
-		if (!(ctrl_inl(ioaddr + EDMR) & 0x3))
-			break;
-		mdelay(1);
-		cnt--;
-	}
-	if (cnt < 0)
-		printk(KERN_ERR "Device reset fail\n");
-
-	/* Table Init */
-	ctrl_outl(0x0, ioaddr + TDLAR);
-	ctrl_outl(0x0, ioaddr + TDFAR);
-	ctrl_outl(0x0, ioaddr + TDFXR);
-	ctrl_outl(0x0, ioaddr + TDFFR);
-	ctrl_outl(0x0, ioaddr + RDLAR);
-	ctrl_outl(0x0, ioaddr + RDFAR);
-	ctrl_outl(0x0, ioaddr + RDFXR);
-	ctrl_outl(0x0, ioaddr + RDFFR);
-#else
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
-	mdelay(3);
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
-#endif
-}
-
 /* free skb and descriptor buffer */
 static void sh_eth_ring_free(struct net_device *ndev)
 {
@@ -228,7 +413,7 @@ static void sh_eth_ring_free(struct net_device *ndev)
 /* format skb and descriptor buffer */
 static void sh_eth_ring_format(struct net_device *ndev)
 {
-	u32 ioaddr = ndev->base_addr, reserve = 0;
+	u32 ioaddr = ndev->base_addr;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	int i;
 	struct sk_buff *skb;
@@ -250,37 +435,27 @@ static void sh_eth_ring_format(struct net_device *ndev)
 		mdp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
+		dma_map_single(&ndev->dev, skb->tail, mdp->rx_buf_sz,
+				DMA_FROM_DEVICE);
 		skb->dev = ndev; /* Mark as being used by this device. */
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-		reserve = SH7763_SKB_ALIGN
-			- ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
-		if (reserve)
-			skb_reserve(skb, reserve);
-#else
-		skb_reserve(skb, RX_OFFSET);
-#endif
+		sh_eth_set_receive_align(skb);
+
 		/* RX descriptor */
 		rxdesc = &mdp->rx_ring[i];
-		rxdesc->addr = (u32)skb->data & ~0x3UL;
+		rxdesc->addr = virt_to_phys(PTR_ALIGN(skb->data, 4));
 		rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
 
 		/* The size of the buffer is 16 byte boundary. */
-		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+		rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
 		/* Rx descriptor address set */
 		if (i == 0) {
-			ctrl_outl((u32)rxdesc, ioaddr + RDLAR);
+			ctrl_outl(mdp->rx_desc_dma, ioaddr + RDLAR);
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			ctrl_outl((u32)rxdesc, ioaddr + RDFAR);
+			ctrl_outl(mdp->rx_desc_dma, ioaddr + RDFAR);
 #endif
 		}
 	}
 
-	/* Rx descriptor address set */
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl((u32)rxdesc, ioaddr + RDFXR);
-	ctrl_outl(0x1, ioaddr + RDFFR);
-#endif
-
 	mdp->dirty_rx = (u32) (i - RX_RING_SIZE);
 
 	/* Mark the last entry as wrapping the ring. */
@@ -296,19 +471,13 @@ static void sh_eth_ring_format(struct net_device *ndev)
 		txdesc->buffer_length = 0;
 		if (i == 0) {
 			/* Tx descriptor address set */
-			ctrl_outl((u32)txdesc, ioaddr + TDLAR);
+			ctrl_outl(mdp->tx_desc_dma, ioaddr + TDLAR);
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			ctrl_outl((u32)txdesc, ioaddr + TDFAR);
+			ctrl_outl(mdp->tx_desc_dma, ioaddr + TDFAR);
 #endif
 		}
 	}
 
-	/* Tx descriptor address set */
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl((u32)txdesc, ioaddr + TDFXR);
-	ctrl_outl(0x1, ioaddr + TDFFR);
-#endif
-
 	txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
 }
 
@@ -331,7 +500,7 @@ static int sh_eth_ring_init(struct net_device *ndev)
 	mdp->rx_skbuff = kmalloc(sizeof(*mdp->rx_skbuff) * RX_RING_SIZE,
 				GFP_KERNEL);
 	if (!mdp->rx_skbuff) {
-		printk(KERN_ERR "%s: Cannot allocate Rx skb\n", ndev->name);
+		dev_err(&ndev->dev, "Cannot allocate Rx skb\n");
 		ret = -ENOMEM;
 		return ret;
 	}
@@ -339,7 +508,7 @@ static int sh_eth_ring_init(struct net_device *ndev)
 	mdp->tx_skbuff = kmalloc(sizeof(*mdp->tx_skbuff) * TX_RING_SIZE,
 				GFP_KERNEL);
 	if (!mdp->tx_skbuff) {
-		printk(KERN_ERR "%s: Cannot allocate Tx skb\n", ndev->name);
+		dev_err(&ndev->dev, "Cannot allocate Tx skb\n");
 		ret = -ENOMEM;
 		goto skb_ring_free;
 	}
@@ -350,8 +519,8 @@ static int sh_eth_ring_init(struct net_device *ndev)
 			GFP_KERNEL);
 
 	if (!mdp->rx_ring) {
-		printk(KERN_ERR "%s: Cannot allocate Rx Ring (size %d bytes)\n",
-			ndev->name, rx_ringsize);
+		dev_err(&ndev->dev, "Cannot allocate Rx Ring (size %d bytes)\n",
+			rx_ringsize);
 		ret = -ENOMEM;
 		goto desc_ring_free;
 	}
@@ -363,8 +532,8 @@ static int sh_eth_ring_init(struct net_device *ndev)
 	mdp->tx_ring = dma_alloc_coherent(NULL, tx_ringsize, &mdp->tx_desc_dma,
 			GFP_KERNEL);
 	if (!mdp->tx_ring) {
-		printk(KERN_ERR "%s: Cannot allocate Tx Ring (size %d bytes)\n",
-			ndev->name, tx_ringsize);
+		dev_err(&ndev->dev, "Cannot allocate Tx Ring (size %d bytes)\n",
+			tx_ringsize);
 		ret = -ENOMEM;
 		goto desc_ring_free;
 	}
@@ -394,44 +563,43 @@ static int sh_eth_dev_init(struct net_device *ndev)
 
 	/* Descriptor format */
 	sh_eth_ring_format(ndev);
-	ctrl_outl(RPADIR_INIT, ioaddr + RPADIR);
+	if (mdp->cd->rpadir)
+		ctrl_outl(mdp->cd->rpadir_value, ioaddr + RPADIR);
 
 	/* all sh_eth int mask */
 	ctrl_outl(0, ioaddr + EESIPR);
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl(EDMR_EL, ioaddr + EDMR);
-#else
-	ctrl_outl(0, ioaddr + EDMR);	/* Endian change */
+#if defined(__LITTLE_ENDIAN__)
+	if (mdp->cd->hw_swap)
+		ctrl_outl(EDMR_EL, ioaddr + EDMR);
+	else
 #endif
+		ctrl_outl(0, ioaddr + EDMR);
 
 	/* FIFO size set */
-	ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR);
+	ctrl_outl(mdp->cd->fdr_value, ioaddr + FDR);
 	ctrl_outl(0, ioaddr + TFTR);
 
 	/* Frame recv control */
-	ctrl_outl(0, ioaddr + RMCR);
+	ctrl_outl(mdp->cd->rmcr_value, ioaddr + RMCR);
 
 	rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5;
 	tx_int_var = mdp->tx_int_var = DESC_I_TINT2;
 	ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER);
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	/* Burst sycle set */
-	ctrl_outl(0x800, ioaddr + BCULR);
-#endif
+	if (mdp->cd->bculr)
+		ctrl_outl(0x800, ioaddr + BCULR);	/* Burst sycle set */
 
-	ctrl_outl((FIFO_F_D_RFF | FIFO_F_D_RFD), ioaddr + FCFTR);
+	ctrl_outl(mdp->cd->fcftr_value, ioaddr + FCFTR);
 
-#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl(0, ioaddr + TRIMD);
-#endif
+	if (!mdp->cd->no_trimd)
+		ctrl_outl(0, ioaddr + TRIMD);
 
 	/* Recv frame limit set register */
 	ctrl_outl(RFLR_VALUE, ioaddr + RFLR);
 
 	ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR);
-	ctrl_outl((DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff), ioaddr + EESIPR);
+	ctrl_outl(mdp->cd->eesipr_value, ioaddr + EESIPR);
 
 	/* PAUSE Prohibition */
 	val = (ctrl_inl(ioaddr + ECMR) & ECMR_DM) |
@@ -439,24 +607,25 @@ static int sh_eth_dev_init(struct net_device *ndev)
 
 	ctrl_outl(val, ioaddr + ECMR);
 
+	if (mdp->cd->set_rate)
+		mdp->cd->set_rate(ndev);
+
 	/* E-MAC Status Register clear */
-	ctrl_outl(ECSR_INIT, ioaddr + ECSR);
+	ctrl_outl(mdp->cd->ecsr_value, ioaddr + ECSR);
 
 	/* E-MAC Interrupt Enable register */
-	ctrl_outl(ECSIPR_INIT, ioaddr + ECSIPR);
+	ctrl_outl(mdp->cd->ecsipr_value, ioaddr + ECSIPR);
 
 	/* Set MAC address */
 	update_mac_address(ndev);
 
 	/* mask reset */
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl(APR_AP, ioaddr + APR);
-	ctrl_outl(MPR_MP, ioaddr + MPR);
-	ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
-	ctrl_outl(BCFR_UNLIMITED, ioaddr + BCFR);
-#endif
+	if (mdp->cd->apr)
+		ctrl_outl(APR_AP, ioaddr + APR);
+	if (mdp->cd->mpr)
+		ctrl_outl(MPR_MP, ioaddr + MPR);
+	if (mdp->cd->tpauser)
+		ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
 
 	/* Setting the Rx mode will start the Rx process. */
 	ctrl_outl(EDRRR_R, ioaddr + EDRRR);
@@ -505,7 +674,7 @@ static int sh_eth_rx(struct net_device *ndev)
 	int boguscnt = (mdp->dirty_rx + RX_RING_SIZE) - mdp->cur_rx;
 	struct sk_buff *skb;
 	u16 pkt_len = 0;
-	u32 desc_status, reserve = 0;
+	u32 desc_status;
 
 	rxdesc = &mdp->rx_ring[entry];
 	while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
@@ -534,7 +703,10 @@ static int sh_eth_rx(struct net_device *ndev)
 			if (desc_status & RD_RFS10)
 				mdp->stats.rx_over_errors++;
 		} else {
-			swaps((char *)(rxdesc->addr & ~0x3), pkt_len + 2);
+			if (!mdp->cd->hw_swap)
+				sh_eth_soft_swap(
+					phys_to_virt(ALIGN(rxdesc->addr, 4)),
+					pkt_len + 2);
 			skb = mdp->rx_skbuff[entry];
 			mdp->rx_skbuff[entry] = NULL;
 			skb_put(skb, pkt_len);
@@ -545,6 +717,7 @@ static int sh_eth_rx(struct net_device *ndev)
 		}
 		rxdesc->status |= cpu_to_edmac(mdp, RD_RACT);
 		entry = (++mdp->cur_rx) % RX_RING_SIZE;
+		rxdesc = &mdp->rx_ring[entry];
 	}
 
 	/* Refill the Rx ring buffers. */
@@ -552,24 +725,20 @@ static int sh_eth_rx(struct net_device *ndev)
 		entry = mdp->dirty_rx % RX_RING_SIZE;
 		rxdesc = &mdp->rx_ring[entry];
 		/* The size of the buffer is 16 byte boundary. */
-		rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F;
+		rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
 
 		if (mdp->rx_skbuff[entry] == NULL) {
 			skb = dev_alloc_skb(mdp->rx_buf_sz);
 			mdp->rx_skbuff[entry] = skb;
 			if (skb == NULL)
 				break;	/* Better luck next round. */
+			dma_map_single(&ndev->dev, skb->tail, mdp->rx_buf_sz,
+					DMA_FROM_DEVICE);
 			skb->dev = ndev;
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			reserve = SH7763_SKB_ALIGN
-				- ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1));
-			if (reserve)
-				skb_reserve(skb, reserve);
-#else
-			skb_reserve(skb, RX_OFFSET);
-#endif
+			sh_eth_set_receive_align(skb);
+
 			skb->ip_summed = CHECKSUM_NONE;
-			rxdesc->addr = (u32)skb->data & ~0x3UL;
+			rxdesc->addr = virt_to_phys(PTR_ALIGN(skb->data, 4));
 		}
 		if (entry >= RX_RING_SIZE - 1)
 			rxdesc->status |=
@@ -593,6 +762,8 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	u32 ioaddr = ndev->base_addr;
 	u32 felic_stat;
+	u32 link_stat;
+	u32 mask;
 
 	if (intr_status & EESR_ECI) {
 		felic_stat = ctrl_inl(ioaddr + ECSR);
@@ -601,7 +772,14 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 			mdp->stats.tx_carrier_errors++;
 		if (felic_stat & ECSR_LCHNG) {
 			/* Link Changed */
-			u32 link_stat = (ctrl_inl(ioaddr + PSR));
+			if (mdp->cd->no_psr) {
+				if (mdp->link == PHY_DOWN)
+					link_stat = 0;
+				else
+					link_stat = PHY_ST_LINK;
+			} else {
+				link_stat = (ctrl_inl(ioaddr + PSR));
+			}
 			if (!(link_stat & PHY_ST_LINK)) {
 				/* Link Down : disable tx and rx */
 				ctrl_outl(ctrl_inl(ioaddr + ECMR) &
@@ -633,17 +811,15 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		if (intr_status & EESR_RFRMER) {
 			/* Receive Frame Overflow int */
 			mdp->stats.rx_frame_errors++;
-			printk(KERN_ERR "Receive Frame Overflow\n");
+			dev_err(&ndev->dev, "Receive Frame Overflow\n");
 		}
 	}
-#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
-	if (intr_status & EESR_ADE) {
-		if (intr_status & EESR_TDE) {
-			if (intr_status & EESR_TFE)
-				mdp->stats.tx_fifo_errors++;
-		}
+
+	if (!mdp->cd->no_ade) {
+		if (intr_status & EESR_ADE && intr_status & EESR_TDE &&
+		    intr_status & EESR_TFE)
+			mdp->stats.tx_fifo_errors++;
 	}
-#endif
 
 	if (intr_status & EESR_RDE) {
 		/* Receive Descriptor Empty int */
@@ -651,24 +827,24 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 
 		if (ctrl_inl(ioaddr + EDRRR) ^ EDRRR_R)
 			ctrl_outl(EDRRR_R, ioaddr + EDRRR);
-		printk(KERN_ERR "Receive Descriptor Empty\n");
+		dev_err(&ndev->dev, "Receive Descriptor Empty\n");
 	}
 	if (intr_status & EESR_RFE) {
 		/* Receive FIFO Overflow int */
 		mdp->stats.rx_fifo_errors++;
-		printk(KERN_ERR "Receive FIFO Overflow\n");
+		dev_err(&ndev->dev, "Receive FIFO Overflow\n");
 	}
-	if (intr_status & (EESR_TWB | EESR_TABT |
-#if !defined(CONFIG_CPU_SUBTYPE_SH7763)
-			EESR_ADE |
-#endif
-			EESR_TDE | EESR_TFE)) {
+
+	mask = EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE;
+	if (mdp->cd->no_ade)
+		mask &= ~EESR_ADE;
+	if (intr_status & mask) {
 		/* Tx error */
 		u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR);
 		/* dmesg */
-		printk(KERN_ERR "%s:TX error. status=%8.8x cur_tx=%8.8x ",
-				ndev->name, intr_status, mdp->cur_tx);
-		printk(KERN_ERR "dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
+		dev_err(&ndev->dev, "TX error. status=%8.8x cur_tx=%8.8x ",
+				intr_status, mdp->cur_tx);
+		dev_err(&ndev->dev, "dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
 				mdp->dirty_tx, (u32) ndev->state, edtrr);
 		/* dirty buffer free */
 		sh_eth_txfree(ndev);
@@ -687,6 +863,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 {
 	struct net_device *ndev = netdev;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
+	struct sh_eth_cpu_data *cd = mdp->cd;
 	irqreturn_t ret = IRQ_NONE;
 	u32 ioaddr, boguscnt = RX_RING_SIZE;
 	u32 intr_status = 0;
@@ -699,7 +876,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	/* Clear interrupt */
 	if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
 			EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
-			TX_CHECK | EESR_ERR_CHECK)) {
+			cd->tx_check | cd->eesr_err_check)) {
 		ctrl_outl(intr_status, ioaddr + EESR);
 		ret = IRQ_HANDLED;
 	} else
@@ -716,12 +893,12 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	}
 
 	/* Tx Check */
-	if (intr_status & TX_CHECK) {
+	if (intr_status & cd->tx_check) {
 		sh_eth_txfree(ndev);
 		netif_wake_queue(ndev);
 	}
 
-	if (intr_status & EESR_ERR_CHECK)
+	if (intr_status & cd->eesr_err_check)
 		sh_eth_error(ndev, intr_status);
 
 	if (--boguscnt < 0) {
@@ -756,32 +933,15 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 		if (phydev->duplex != mdp->duplex) {
 			new_state = 1;
 			mdp->duplex = phydev->duplex;
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			if (mdp->duplex) { /*  FULL */
-				ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM,
-						ioaddr + ECMR);
-			} else {	/* Half */
-				ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM,
-						ioaddr + ECMR);
-			}
-#endif
+			if (mdp->cd->set_duplex)
+				mdp->cd->set_duplex(ndev);
 		}
 
 		if (phydev->speed != mdp->speed) {
 			new_state = 1;
 			mdp->speed = phydev->speed;
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			switch (mdp->speed) {
-			case 10: /* 10BASE */
-				ctrl_outl(GECMR_10, ioaddr + GECMR); break;
-			case 100:/* 100BASE */
-				ctrl_outl(GECMR_100, ioaddr + GECMR); break;
-			case 1000: /* 1000BASE */
-				ctrl_outl(GECMR_1000, ioaddr + GECMR); break;
-			default:
-				break;
-			}
-#endif
+			if (mdp->cd->set_rate)
+				mdp->cd->set_rate(ndev);
 		}
 		if (mdp->link == PHY_DOWN) {
 			ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF)
@@ -804,7 +964,7 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 static int sh_eth_phy_init(struct net_device *ndev)
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
-	char phy_id[BUS_ID_SIZE];
+	char phy_id[MII_BUS_ID_SIZE + 3];
 	struct phy_device *phydev = NULL;
 
 	snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
@@ -821,8 +981,9 @@ static int sh_eth_phy_init(struct net_device *ndev)
 		dev_err(&ndev->dev, "phy_connect failed\n");
 		return PTR_ERR(phydev);
 	}
+
 	dev_info(&ndev->dev, "attached phy %i to driver %s\n",
-	phydev->addr, phydev->drv->name);
+		phydev->addr, phydev->drv->name);
 
 	mdp->phydev = phydev;
 
@@ -860,7 +1021,7 @@ static int sh_eth_open(struct net_device *ndev)
 #endif
 				ndev->name, ndev);
 	if (ret) {
-		printk(KERN_ERR "Can not assign IRQ number to %s\n", CARDNAME);
+		dev_err(&ndev->dev, "Can not assign IRQ number\n");
 		return ret;
 	}
 
@@ -947,7 +1108,7 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		if (!sh_eth_txfree(ndev)) {
 			netif_stop_queue(ndev);
 			spin_unlock_irqrestore(&mdp->lock, flags);
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 	}
 	spin_unlock_irqrestore(&mdp->lock, flags);
@@ -955,9 +1116,11 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	entry = mdp->cur_tx % TX_RING_SIZE;
 	mdp->tx_skbuff[entry] = skb;
 	txdesc = &mdp->tx_ring[entry];
-	txdesc->addr = (u32)(skb->data);
+	txdesc->addr = virt_to_phys(skb->data);
 	/* soft swap. */
-	swaps((char *)(txdesc->addr & ~0x3), skb->len + 2);
+	if (!mdp->cd->hw_swap)
+		sh_eth_soft_swap(phys_to_virt(ALIGN(txdesc->addr, 4)),
+				 skb->len + 2);
 	/* write back */
 	__flush_purge_region(skb->data, skb->len);
 	if (skb->len < ETHERSMALL)
@@ -1059,7 +1222,7 @@ static int sh_eth_do_ioctl(struct net_device *ndev, struct ifreq *rq,
 	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
 }
 
-
+#if defined(SH_ETH_HAS_TSU)
 /* Multicast reception directions set */
 static void sh_eth_set_multicast_list(struct net_device *ndev)
 {
@@ -1104,6 +1267,7 @@ static void sh_eth_tsu_init(u32 ioaddr)
 	ctrl_outl(0, ioaddr + TSU_POST3);	/* Disable CAM entry [16-23] */
 	ctrl_outl(0, ioaddr + TSU_POST4);	/* Disable CAM entry [24-31] */
 }
+#endif /* SH_ETH_HAS_TSU */
 
 /* MDIO bus release function */
 static int sh_mdio_release(struct net_device *ndev)
@@ -1193,7 +1357,9 @@ static const struct net_device_ops sh_eth_netdev_ops = {
 	.ndo_stop		= sh_eth_close,
 	.ndo_start_xmit		= sh_eth_start_xmit,
 	.ndo_get_stats		= sh_eth_get_stats,
+#if defined(SH_ETH_HAS_TSU)
 	.ndo_set_multicast_list	= sh_eth_set_multicast_list,
+#endif
 	.ndo_tx_timeout		= sh_eth_tx_timeout,
 	.ndo_do_ioctl		= sh_eth_do_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -1219,7 +1385,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	ndev = alloc_etherdev(sizeof(struct sh_eth_private));
 	if (!ndev) {
-		printk(KERN_ERR "%s: could not allocate device.\n", CARDNAME);
+		dev_err(&pdev->dev, "Could not allocate device.\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -1252,6 +1418,10 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 	/* EDMAC endian */
 	mdp->edmac_endian = pd->edmac_endian;
 
+	/* set cpu data */
+	mdp->cd = &sh_eth_my_cpu_data;
+	sh_eth_set_default_cpu_data(mdp->cd);
+
 	/* set function */
 	ndev->netdev_ops = &sh_eth_netdev_ops;
 	ndev->watchdog_timeo = TX_TIMEOUT;
@@ -1264,13 +1434,10 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 
 	/* First device only init */
 	if (!devno) {
-#if defined(ARSTR)
-		/* reset device */
-		ctrl_outl(ARSTR_ARSTR, ARSTR);
-		mdelay(1);
-#endif
+		if (mdp->cd->chip_reset)
+			mdp->cd->chip_reset(ndev);
 
-#if defined(SH_TSU_ADDR)
+#if defined(SH_ETH_HAS_TSU)
 		/* TSU init (Init only)*/
 		sh_eth_tsu_init(SH_TSU_ADDR);
 #endif
@@ -1287,8 +1454,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
 		goto out_unregister;
 
 	/* pritnt device infomation */
-	printk(KERN_INFO "%s: %s at 0x%x, ",
-	       ndev->name, CARDNAME, (u32) ndev->base_addr);
+	pr_info("Base address at 0x%x, ",
+	       (u32)ndev->base_addr);
 
 	for (i = 0; i < 5; i++)
 		printk("%02X:", ndev->dev_addr[i]);
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 1537e13e623..9afe5b4c855 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -2,7 +2,7 @@
  *  SuperH Ethernet device driver
  *
  *  Copyright (C) 2006-2008 Nobuhiro Iwamatsu
- *  Copyright (C) 2008 Renesas Solutions Corp.
+ *  Copyright (C) 2008-2009 Renesas Solutions Corp.
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms and conditions of the GNU General Public License,
@@ -39,12 +39,12 @@
 #define ETHERSMALL		60
 #define PKT_BUF_SZ		1538
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+/* This CPU register maps is very difference by other SH4 CPU */
 
-#define SH7763_SKB_ALIGN 32
 /* Chip Base Address */
 # define SH_TSU_ADDR	0xFEE01800
-# define ARSTR			SH_TSU_ADDR
+# define ARSTR		SH_TSU_ADDR
 
 /* Chip Registers */
 /* E-DMAC */
@@ -143,8 +143,60 @@
 # define FWNLCR1         0xB0
 # define FWALCR1         0x40
 
-#else /* CONFIG_CPU_SUBTYPE_SH7763 */
-# define RX_OFFSET 2	/* skb offset */
+#elif defined(CONFIG_CPU_SH4)	/* #if defined(CONFIG_CPU_SUBTYPE_SH7763) */
+/* EtherC */
+#define ECMR		0x100
+#define RFLR		0x108
+#define ECSR		0x110
+#define ECSIPR		0x118
+#define PIR		0x120
+#define PSR		0x128
+#define RDMLR		0x140
+#define IPGR		0x150
+#define APR		0x154
+#define MPR		0x158
+#define TPAUSER		0x164
+#define RFCF		0x160
+#define TPAUSECR	0x168
+#define BCFRR		0x16c
+#define MAHR		0x1c0
+#define MALR		0x1c8
+#define TROCR		0x1d0
+#define CDCR		0x1d4
+#define LCCR		0x1d8
+#define CNDCR		0x1dc
+#define CEFCR		0x1e4
+#define FRECR		0x1e8
+#define TSFRCR		0x1ec
+#define TLFRCR		0x1f0
+#define RFCR		0x1f4
+#define MAFCR		0x1f8
+#define RTRATE		0x1fc
+
+/* E-DMAC */
+#define EDMR		0x000
+#define EDTRR		0x008
+#define EDRRR		0x010
+#define TDLAR		0x018
+#define RDLAR		0x020
+#define EESR		0x028
+#define EESIPR		0x030
+#define TRSCER		0x038
+#define RMFCR		0x040
+#define TFTR		0x048
+#define FDR		0x050
+#define RMCR		0x058
+#define TFUCR		0x064
+#define RFOCR		0x068
+#define FCFTR		0x070
+#define RPADIR		0x078
+#define TRIMD		0x07c
+#define RBWAR		0x0c8
+#define RDFAR		0x0cc
+#define TBRAR		0x0d4
+#define TDFAR		0x0d8
+#else /* #elif defined(CONFIG_CPU_SH4) */
+/* This section is SH3 or SH2 */
 #ifndef CONFIG_CPU_SUBTYPE_SH7619
 /* Chip base address */
 # define SH_TSU_ADDR  0xA7000804
@@ -243,6 +295,30 @@
 
 #endif /* CONFIG_CPU_SUBTYPE_SH7763 */
 
+/* There are avoid compile error... */
+#if !defined(BCULR)
+#define BCULR	0x0fc
+#endif
+#if !defined(TRIMD)
+#define TRIMD	0x0fc
+#endif
+#if !defined(APR)
+#define APR	0x0fc
+#endif
+#if !defined(MPR)
+#define MPR	0x0fc
+#endif
+#if !defined(TPAUSER)
+#define TPAUSER	0x0fc
+#endif
+
+/* Driver's parameters */
+#if defined(CONFIG_CPU_SH4)
+#define SH4_SKB_RX_ALIGN	32
+#else
+#define SH2_SH3_SKB_RX_ALIGN	2
+#endif
+
 /*
  * Register's bits
  */
@@ -261,11 +337,10 @@ enum GECMR_BIT {
 
 /* EDMR */
 enum DMAC_M_BIT {
+	EDMR_EL = 0x40, /* Litte endian */
 	EDMR_DL1 = 0x20, EDMR_DL0 = 0x10,
 #ifdef CONFIG_CPU_SUBTYPE_SH7763
-	EDMR_SRST	= 0x03,
-	EMDR_DESC_R	= 0x30, /* Descriptor reserve size */
-	EDMR_EL		= 0x40, /* Litte endian */
+	EDMR_SRST = 0x03,
 #else /* CONFIG_CPU_SUBTYPE_SH7763 */
 	EDMR_SRST = 0x01,
 #endif
@@ -307,47 +382,43 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, };
 
 /* EESR */
 enum EESR_BIT {
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
-	EESR_TWB  = 0x40000000,
-#else
-	EESR_TWB  = 0xC0000000,
-	EESR_TC1  = 0x20000000,
-	EESR_TUC  = 0x10000000,
-	EESR_ROC  = 0x80000000,
-#endif
-	EESR_TABT = 0x04000000,
-	EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000,
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
-	EESR_ADE  = 0x00800000,
-#endif
-	EESR_ECI  = 0x00400000,
-	EESR_FTC  = 0x00200000, EESR_TDE  = 0x00100000,
-	EESR_TFE  = 0x00080000, EESR_FRC  = 0x00040000,
-	EESR_RDE  = 0x00020000, EESR_RFE  = 0x00010000,
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
-	EESR_CND  = 0x00000800,
-#endif
-	EESR_DLC  = 0x00000400,
-	EESR_CD   = 0x00000200, EESR_RTO  = 0x00000100,
-	EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040,
-	EESR_CELF = 0x00000020, EESR_RRF  = 0x00000010,
-	EESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004,
-	EESR_PRE  = 0x00000002, EESR_CERF = 0x00000001,
-};
-
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define TX_CHECK (EESR_TC1 | EESR_FTC)
-# define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
-		| EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI)
-# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE)
-
-#else
-# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO)
-# define EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \
-		| EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI)
-# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)
-#endif
+	EESR_TWB1	= 0x80000000,
+	EESR_TWB	= 0x40000000,	/* same as TWB0 */
+	EESR_TC1	= 0x20000000,
+	EESR_TUC	= 0x10000000,
+	EESR_ROC	= 0x08000000,
+	EESR_TABT	= 0x04000000,
+	EESR_RABT	= 0x02000000,
+	EESR_RFRMER	= 0x01000000,	/* same as RFCOF */
+	EESR_ADE	= 0x00800000,
+	EESR_ECI	= 0x00400000,
+	EESR_FTC	= 0x00200000,	/* same as TC or TC0 */
+	EESR_TDE	= 0x00100000,
+	EESR_TFE	= 0x00080000,	/* same as TFUF */
+	EESR_FRC	= 0x00040000,	/* same as FR */
+	EESR_RDE	= 0x00020000,
+	EESR_RFE	= 0x00010000,
+	EESR_CND	= 0x00000800,
+	EESR_DLC	= 0x00000400,
+	EESR_CD		= 0x00000200,
+	EESR_RTO	= 0x00000100,
+	EESR_RMAF	= 0x00000080,
+	EESR_CEEF	= 0x00000040,
+	EESR_CELF	= 0x00000020,
+	EESR_RRF	= 0x00000010,
+	EESR_RTLF	= 0x00000008,
+	EESR_RTSF	= 0x00000004,
+	EESR_PRE	= 0x00000002,
+	EESR_CERF	= 0x00000001,
+};
+
+#define DEFAULT_TX_CHECK	(EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | \
+				 EESR_RTO)
+#define DEFAULT_EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | \
+				 EESR_RDE | EESR_RFRMER | EESR_ADE | \
+				 EESR_TFE | EESR_TDE | EESR_ECI)
+#define DEFAULT_TX_ERROR_CHECK	(EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | \
+				 EESR_TFE)
 
 /* EESIPR */
 enum DMAC_IM_BIT {
@@ -386,12 +457,8 @@ enum FCFTR_BIT {
 	FCFTR_RFF0 = 0x00010000, FCFTR_RFD2 = 0x00000004,
 	FCFTR_RFD1 = 0x00000002, FCFTR_RFD0 = 0x00000001,
 };
-#define FIFO_F_D_RFF	(FCFTR_RFF2|FCFTR_RFF1|FCFTR_RFF0)
-#ifndef CONFIG_CPU_SUBTYPE_SH7619
-#define FIFO_F_D_RFD	(FCFTR_RFD2|FCFTR_RFD1|FCFTR_RFD0)
-#else
-#define FIFO_F_D_RFD	(FCFTR_RFD0)
-#endif
+#define DEFAULT_FIFO_F_D_RFF	(FCFTR_RFF2 | FCFTR_RFF1 | FCFTR_RFF0)
+#define DEFAULT_FIFO_F_D_RFD	(FCFTR_RFD2 | FCFTR_RFD1 | FCFTR_RFD0)
 
 /* Transfer descriptor bit */
 enum TD_STS_BIT {
@@ -404,60 +471,38 @@ enum TD_STS_BIT {
 #define TD_TFP	(TD_TFP1|TD_TFP0)
 
 /* RMCR */
-enum RECV_RST_BIT { RMCR_RST = 0x01, };
+#define DEFAULT_RMCR_VALUE	0x00000000
+
 /* ECMR */
 enum FELIC_MODE_BIT {
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
 	ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000,
 	ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000,
-#endif
 	ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000,
 	ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000,
 	ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020,
-	ECMR_ILB = 0x00000008, ECMR_ELB = 0x00000004, ECMR_DM = 0x00000002,
-	ECMR_PRM = 0x00000001,
+	ECMR_RTM = 0x00000010, ECMR_ILB = 0x00000008, ECMR_ELB = 0x00000004,
+	ECMR_DM = 0x00000002, ECMR_PRM = 0x00000001,
 };
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-#define ECMR_CHG_DM	(ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\
-			ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
-#elif CONFIG_CPU_SUBTYPE_SH7619
-#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
-#else
-#define ECMR_CHG_DM	(ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
-#endif
-
 /* ECSR */
 enum ECSR_STATUS_BIT {
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
 	ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10,
-#endif
 	ECSR_LCHNG = 0x04,
 	ECSR_MPD = 0x02, ECSR_ICD = 0x01,
 };
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP)
-#else
-# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \
-			ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP)
-#endif
+#define DEFAULT_ECSR_INIT	(ECSR_BRCRX | ECSR_PSRTO | ECSR_LCHNG | \
+				 ECSR_ICD | ECSIPR_MPDIP)
 
 /* ECSIPR */
 enum ECSIPR_STATUS_MASK_BIT {
-#ifndef CONFIG_CPU_SUBTYPE_SH7763
 	ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10,
-#endif
 	ECSIPR_LCHNGIP = 0x04,
 	ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01,
 };
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
-#else
-# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \
-				ECSIPR_ICDIP | ECSIPR_MPDIP)
-#endif
+#define DEFAULT_ECSIPR_INIT	(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | \
+				 ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP)
 
 /* APR */
 enum APR_BIT {
@@ -483,23 +528,12 @@ enum RPADIR_BIT {
 	RPADIR_PADR = 0x0003f,
 };
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-# define RPADIR_INIT (0x00)
-#else
-# define RPADIR_INIT (RPADIR_PADS1)
-#endif
-
 /* RFLR */
 #define RFLR_VALUE 0x1000
 
 /* FDR */
-enum FIFO_SIZE_BIT {
-#ifndef CONFIG_CPU_SUBTYPE_SH7619
-	FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007,
-#else
-	FIFO_SIZE_T = 0x00000100, FIFO_SIZE_R = 0x00000001,
-#endif
-};
+#define DEFAULT_FDR_INIT	0x00000707
+
 enum phy_offsets {
 	PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3,
 	PHY_ANA = 4, PHY_ANL = 5, PHY_ANE = 6,
@@ -633,7 +667,43 @@ struct sh_eth_rxdesc {
 	u32 pad0;		/* padding data */
 } __attribute__((aligned(2), packed));
 
+/* This structure is used by each CPU dependency handling. */
+struct sh_eth_cpu_data {
+	/* optional functions */
+	void (*chip_reset)(struct net_device *ndev);
+	void (*set_duplex)(struct net_device *ndev);
+	void (*set_rate)(struct net_device *ndev);
+
+	/* mandatory initialize value */
+	unsigned long eesipr_value;
+
+	/* optional initialize value */
+	unsigned long ecsr_value;
+	unsigned long ecsipr_value;
+	unsigned long fdr_value;
+	unsigned long fcftr_value;
+	unsigned long rpadir_value;
+	unsigned long rmcr_value;
+
+	/* interrupt checking mask */
+	unsigned long tx_check;
+	unsigned long eesr_err_check;
+	unsigned long tx_error_check;
+
+	/* hardware features */
+	unsigned no_psr:1;		/* EtherC DO NOT have PSR */
+	unsigned apr:1;			/* EtherC have APR */
+	unsigned mpr:1;			/* EtherC have MPR */
+	unsigned tpauser:1;		/* EtherC have TPAUSER */
+	unsigned bculr:1;		/* EtherC have BCULR */
+	unsigned hw_swap:1;		/* E-DMAC have DE bit in EDMR */
+	unsigned rpadir:1;		/* E-DMAC have RPADIR */
+	unsigned no_trimd:1;		/* E-DMAC DO NOT have TRIMD */
+	unsigned no_ade:1;	/* E-DMAC DO NOT have ADE bit in EESR */
+};
+
 struct sh_eth_private {
+	struct sh_eth_cpu_data *cd;
 	dma_addr_t rx_desc_dma;
 	dma_addr_t tx_desc_dma;
 	struct sh_eth_rxdesc *rx_ring;
@@ -661,11 +731,7 @@ struct sh_eth_private {
 	struct net_device_stats tsu_stats;	/* TSU forward status */
 };
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7763
-/* SH7763 has endian control register */
-#define swaps(x, y)
-#else
-static void swaps(char *src, int len)
+static inline void sh_eth_soft_swap(char *src, int len)
 {
 #ifdef __LITTLE_ENDIAN__
 	u32 *p = (u32 *)src;
@@ -676,5 +742,5 @@ static void swaps(char *src, int len)
 		*p = swab32(*p);
 #endif
 }
-#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
-#endif
+
+#endif	/* #ifndef __SH_ETH_H__ */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 55ccd51d247..e2247669a49 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -47,7 +47,7 @@
 #define PHY_ID_ANY		0x1f
 #define MII_REG_ANY		0x1f
 
-#define DRV_VERSION		"1.2"
+#define DRV_VERSION		"1.3"
 #define DRV_NAME		"sis190"
 #define SIS190_DRIVER_NAME	DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
 #define PFX DRV_NAME ": "
@@ -317,6 +317,7 @@ static struct mii_chip_info {
         unsigned int type;
 	u32 feature;
 } mii_chip_table[] = {
+	{ "Atheros PHY",          { 0x004d, 0xd010 }, LAN, 0 },
 	{ "Atheros PHY AR8012",   { 0x004d, 0xd020 }, LAN, 0 },
 	{ "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 },
 	{ "Broadcom PHY AC131",   { 0x0143, 0xbc70 }, LAN, 0 },
@@ -347,7 +348,7 @@ static struct {
 	u32 msg_enable;
 } debug = { -1 };
 
-MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver");
+MODULE_DESCRIPTION("SiS sis190/191 Gigabit Ethernet driver");
 module_param(rx_copybreak, int, 0);
 MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
 module_param_named(debug, debug.msg_enable, int, 0);
@@ -539,8 +540,8 @@ static bool sis190_try_rx_copy(struct sis190_private *tp,
 	if (!skb)
 		goto out;
 
-	pci_dma_sync_single_for_device(tp->pci_dev, addr, pkt_size,
-				       PCI_DMA_FROMDEVICE);
+	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, tp->rx_buf_sz,
+				PCI_DMA_FROMDEVICE);
 	skb_reserve(skb, 2);
 	skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size);
 	*sk_buff = skb;
@@ -942,9 +943,9 @@ static void sis190_phy_task(struct work_struct *work)
 			u32 ctl;
 			const char *msg;
 		} reg31[] = {
-			{ LPA_1000XFULL | LPA_SLCT, 0x07000c00 | 0x00001000,
+			{ LPA_1000FULL, 0x07000c00 | 0x00001000,
 				"1000 Mbps Full Duplex" },
-			{ LPA_1000XHALF | LPA_SLCT, 0x07000c00,
+			{ LPA_1000HALF, 0x07000c00,
 				"1000 Mbps Half Duplex" },
 			{ LPA_100FULL, 0x04000800 | 0x00001000,
 				"100 Mbps Full Duplex" },
@@ -955,22 +956,35 @@ static void sis190_phy_task(struct work_struct *work)
 			{ LPA_10HALF, 0x04000400,
 				"10 Mbps Half Duplex" },
 			{ 0, 0x04000400, "unknown" }
- 		}, *p;
-		u16 adv;
+		}, *p = NULL;
+		u16 adv, autoexp, gigadv, gigrec;
 
 		val = mdio_read(ioaddr, phy_id, 0x1f);
 		net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val);
 
 		val = mdio_read(ioaddr, phy_id, MII_LPA);
 		adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
-		net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n",
-			 dev->name, val, adv);
-
-		val &= adv;
+		autoexp = mdio_read(ioaddr, phy_id, MII_EXPANSION);
+		net_link(tp, KERN_INFO "%s: mii lpa=%04x adv=%04x exp=%04x.\n",
+			 dev->name, val, adv, autoexp);
+
+		if (val & LPA_NPAGE && autoexp & EXPANSION_NWAY) {
+			/* check for gigabit speed */
+			gigadv = mdio_read(ioaddr, phy_id, MII_CTRL1000);
+			gigrec = mdio_read(ioaddr, phy_id, MII_STAT1000);
+			val = (gigadv & (gigrec >> 2));
+			if (val & ADVERTISE_1000FULL)
+				p = reg31;
+			else if (val & ADVERTISE_1000HALF)
+				p = reg31 + 1;
+		}
+		if (!p) {
+			val &= adv;
 
-		for (p = reg31; p->val; p++) {
-			if ((val & p->val) == p->val)
-				break;
+			for (p = reg31; p->val; p++) {
+				if ((val & p->val) == p->val)
+					break;
+			}
 		}
 
 		p->ctl |= SIS_R32(StationControl) & ~0x0f001c00;
@@ -1204,8 +1218,6 @@ static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb);
 
-	dev->trans_start = jiffies;
-
 	dirty_tx = tp->dirty_tx;
 	if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) {
 		netif_stop_queue(dev);
@@ -1315,12 +1327,15 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
 			((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
 				LAN : HOME) : p->type;
 		tp->features |= p->feature;
-	} else
+		net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
+			pci_name(tp->pci_dev), p->name, phy_id);
+	} else {
 		phy->type = UNKNOWN;
-
-	net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
-		  pci_name(tp->pci_dev),
-		  (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id);
+		net_probe(tp, KERN_INFO
+			"%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
+			pci_name(tp->pci_dev),
+			phy->id[0], (phy->id[1] & 0xfff0), phy_id);
+	}
 }
 
 static void sis190_mii_probe_88e1111_fixup(struct sis190_private *tp)
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 2d4617b3e20..a9a897bb42d 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1584,7 +1584,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 	/* Don't transmit data before the complete of auto-negotiation */
 	if(!sis_priv->autong_complete){
 		netif_stop_queue(net_dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	spin_lock_irqsave(&sis_priv->lock, flags);
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff589988d1..2976757a36f 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
 #define SMT_RDF_SUCCESS	0x00000003	/* success (PMF) */
 #define SMT_RDF_BADSET	0x00000004	/* bad set count (PMF) */
 #define SMT_RDF_ILLEGAL 0x00000005	/* read only (PMF) */
-#define SMT_RDF_NOPARAM	0x6		/* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM	0x6		/* parameter not supported (PMF) */
 #define SMT_RDF_RANGE	0x8		/* out of range */
 #define SMT_RDF_AUTHOR	0x9		/* not autohorized */
 #define SMT_RDF_LENGTH	0x0a		/* length error */
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index e14aec0a733..088fe26484e 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -159,12 +159,6 @@ MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
 
 static int num_boards;	/* total number of adapters configured */
 
-#ifdef DRIVERDEBUG
-#define PRINTK(s, args...) printk(s, ## args)
-#else
-#define PRINTK(s, args...)
-#endif				// DRIVERDEBUG
-
 static const struct net_device_ops skfp_netdev_ops = {
 	.ndo_open		= skfp_open,
 	.ndo_stop		= skfp_close,
@@ -213,7 +207,7 @@ static int skfp_init_one(struct pci_dev *pdev,
 	void __iomem *mem;
 	int err;
 
-	PRINTK(KERN_INFO "entering skfp_init_one\n");
+	pr_debug(KERN_INFO "entering skfp_init_one\n");
 
 	if (num_boards == 0) 
 		printk("%s\n", boot_msg);
@@ -389,7 +383,7 @@ static  int skfp_driver_init(struct net_device *dev)
 	skfddi_priv *bp = &smc->os;
 	int err = -EIO;
 
-	PRINTK(KERN_INFO "entering skfp_driver_init\n");
+	pr_debug(KERN_INFO "entering skfp_driver_init\n");
 
 	// set the io address in private structures
 	bp->base_addr = dev->base_addr;
@@ -409,7 +403,7 @@ static  int skfp_driver_init(struct net_device *dev)
 
 	// Determine the required size of the 'shared' memory area.
 	bp->SharedMemSize = mac_drv_check_space();
-	PRINTK(KERN_INFO "Memory for HWM: %ld\n", bp->SharedMemSize);
+	pr_debug(KERN_INFO "Memory for HWM: %ld\n", bp->SharedMemSize);
 	if (bp->SharedMemSize > 0) {
 		bp->SharedMemSize += 16;	// for descriptor alignment
 
@@ -433,13 +427,13 @@ static  int skfp_driver_init(struct net_device *dev)
 
 	card_stop(smc);		// Reset adapter.
 
-	PRINTK(KERN_INFO "mac_drv_init()..\n");
+	pr_debug(KERN_INFO "mac_drv_init()..\n");
 	if (mac_drv_init(smc) != 0) {
-		PRINTK(KERN_INFO "mac_drv_init() failed.\n");
+		pr_debug(KERN_INFO "mac_drv_init() failed.\n");
 		goto fail;
 	}
 	read_address(smc, NULL);
-	PRINTK(KERN_INFO "HW-Addr: %02x %02x %02x %02x %02x %02x\n",
+	pr_debug(KERN_INFO "HW-Addr: %02x %02x %02x %02x %02x %02x\n",
 	       smc->hw.fddi_canon_addr.a[0],
 	       smc->hw.fddi_canon_addr.a[1],
 	       smc->hw.fddi_canon_addr.a[2],
@@ -495,7 +489,7 @@ static int skfp_open(struct net_device *dev)
 	struct s_smc *smc = netdev_priv(dev);
 	int err;
 
-	PRINTK(KERN_INFO "entering skfp_open\n");
+	pr_debug(KERN_INFO "entering skfp_open\n");
 	/* Register IRQ - support shared interrupts by passing device ptr */
 	err = request_irq(dev->irq, skfp_interrupt, IRQF_SHARED,
 			  dev->name, dev);
@@ -868,12 +862,12 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 	/* Enable promiscuous mode, if necessary */
 	if (dev->flags & IFF_PROMISC) {
 		mac_drv_rx_mode(smc, RX_ENABLE_PROMISC);
-		PRINTK(KERN_INFO "PROMISCUOUS MODE ENABLED\n");
+		pr_debug(KERN_INFO "PROMISCUOUS MODE ENABLED\n");
 	}
 	/* Else, update multicast address table */
 	else {
 		mac_drv_rx_mode(smc, RX_DISABLE_PROMISC);
-		PRINTK(KERN_INFO "PROMISCUOUS MODE DISABLED\n");
+		pr_debug(KERN_INFO "PROMISCUOUS MODE DISABLED\n");
 
 		// Reset all MC addresses
 		mac_clear_multicast(smc);
@@ -881,7 +875,7 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 
 		if (dev->flags & IFF_ALLMULTI) {
 			mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
-			PRINTK(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
+			pr_debug(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
 		} else if (dev->mc_count > 0) {
 			if (dev->mc_count <= FPMAX_MULTICAST) {
 				/* use exact filtering */
@@ -894,12 +888,12 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 							  (struct fddi_addr *)dmi->dmi_addr, 
 							  1);
 
-					PRINTK(KERN_INFO "ENABLE MC ADDRESS:");
-					PRINTK(" %02x %02x %02x ",
+					pr_debug(KERN_INFO "ENABLE MC ADDRESS:");
+					pr_debug(" %02x %02x %02x ",
 					       dmi->dmi_addr[0],
 					       dmi->dmi_addr[1],
 					       dmi->dmi_addr[2]);
-					PRINTK("%02x %02x %02x\n",
+					pr_debug("%02x %02x %02x\n",
 					       dmi->dmi_addr[3],
 					       dmi->dmi_addr[4],
 					       dmi->dmi_addr[5]);
@@ -909,11 +903,11 @@ static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev)
 			} else {	// more MC addresses than HW supports
 
 				mac_drv_rx_mode(smc, RX_ENABLE_ALLMULTI);
-				PRINTK(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
+				pr_debug(KERN_INFO "ENABLE ALL MC ADDRESSES\n");
 			}
 		} else {	// no MC addresses
 
-			PRINTK(KERN_INFO "DISABLE ALL MC ADDRESSES\n");
+			pr_debug(KERN_INFO "DISABLE ALL MC ADDRESSES\n");
 		}
 
 		/* Update adapter filters */
@@ -1067,7 +1061,7 @@ static int skfp_send_pkt(struct sk_buff *skb, struct net_device *dev)
 	struct s_smc *smc = netdev_priv(dev);
 	skfddi_priv *bp = &smc->os;
 
-	PRINTK(KERN_INFO "skfp_send_pkt\n");
+	pr_debug(KERN_INFO "skfp_send_pkt\n");
 
 	/*
 	 * Verify that incoming transmit request is OK
@@ -1088,7 +1082,7 @@ static int skfp_send_pkt(struct sk_buff *skb, struct net_device *dev)
 	if (bp->QueueSkb == 0) {	// return with tbusy set: queue full
 
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	bp->QueueSkb--;
 	skb_queue_tail(&bp->SendSkbQueue, skb);
@@ -1137,13 +1131,13 @@ static void send_queued_packets(struct s_smc *smc)
 
 	int frame_status;	// HWM tx frame status.
 
-	PRINTK(KERN_INFO "send queued packets\n");
+	pr_debug(KERN_INFO "send queued packets\n");
 	for (;;) {
 		// send first buffer from queue
 		skb = skb_dequeue(&bp->SendSkbQueue);
 
 		if (!skb) {
-			PRINTK(KERN_INFO "queue empty\n");
+			pr_debug(KERN_INFO "queue empty\n");
 			return;
 		}		// queue empty !
 
@@ -1174,11 +1168,11 @@ static void send_queued_packets(struct s_smc *smc)
 
 			if ((frame_status & RING_DOWN) != 0) {
 				// Ring is down.
-				PRINTK("Tx attempt while ring down.\n");
+				pr_debug("Tx attempt while ring down.\n");
 			} else if ((frame_status & OUT_OF_TXD) != 0) {
-				PRINTK("%s: out of TXDs.\n", bp->dev->name);
+				pr_debug("%s: out of TXDs.\n", bp->dev->name);
 			} else {
-				PRINTK("%s: out of transmit resources",
+				pr_debug("%s: out of transmit resources",
 					bp->dev->name);
 			}
 
@@ -1255,7 +1249,7 @@ static void CheckSourceAddress(unsigned char *frame, unsigned char *hw_addr)
 static void ResetAdapter(struct s_smc *smc)
 {
 
-	PRINTK(KERN_INFO "[fddi: ResetAdapter]\n");
+	pr_debug(KERN_INFO "[fddi: ResetAdapter]\n");
 
 	// Stop the adapter.
 
@@ -1301,7 +1295,7 @@ void llc_restart_tx(struct s_smc *smc)
 {
 	skfddi_priv *bp = &smc->os;
 
-	PRINTK(KERN_INFO "[llc_restart_tx]\n");
+	pr_debug(KERN_INFO "[llc_restart_tx]\n");
 
 	// Try to send queued packets
 	spin_unlock(&bp->DriverLock);
@@ -1331,7 +1325,7 @@ void *mac_drv_get_space(struct s_smc *smc, unsigned int size)
 {
 	void *virt;
 
-	PRINTK(KERN_INFO "mac_drv_get_space (%d bytes), ", size);
+	pr_debug(KERN_INFO "mac_drv_get_space (%d bytes), ", size);
 	virt = (void *) (smc->os.SharedMemAddr + smc->os.SharedMemHeap);
 
 	if ((smc->os.SharedMemHeap + size) > smc->os.SharedMemSize) {
@@ -1340,9 +1334,9 @@ void *mac_drv_get_space(struct s_smc *smc, unsigned int size)
 	}
 	smc->os.SharedMemHeap += size;	// Move heap pointer.
 
-	PRINTK(KERN_INFO "mac_drv_get_space end\n");
-	PRINTK(KERN_INFO "virt addr: %lx\n", (ulong) virt);
-	PRINTK(KERN_INFO "bus  addr: %lx\n", (ulong)
+	pr_debug(KERN_INFO "mac_drv_get_space end\n");
+	pr_debug(KERN_INFO "virt addr: %lx\n", (ulong) virt);
+	pr_debug(KERN_INFO "bus  addr: %lx\n", (ulong)
 	       (smc->os.SharedMemDMA +
 		((char *) virt - (char *)smc->os.SharedMemAddr)));
 	return (virt);
@@ -1372,7 +1366,7 @@ void *mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size)
 
 	char *virt;
 
-	PRINTK(KERN_INFO "mac_drv_get_desc_mem\n");
+	pr_debug(KERN_INFO "mac_drv_get_desc_mem\n");
 
 	// Descriptor memory must be aligned on 16-byte boundary.
 
@@ -1381,8 +1375,8 @@ void *mac_drv_get_desc_mem(struct s_smc *smc, unsigned int size)
 	size = (u_int) (16 - (((unsigned long) virt) & 15UL));
 	size = size % 16;
 
-	PRINTK("Allocate %u bytes alignment gap ", size);
-	PRINTK("for descriptor memory.\n");
+	pr_debug("Allocate %u bytes alignment gap ", size);
+	pr_debug("for descriptor memory.\n");
 
 	if (!mac_drv_get_space(smc, size)) {
 		printk("fddi: Unable to align descriptor memory.\n");
@@ -1516,11 +1510,11 @@ void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd)
 {
 	struct sk_buff *skb;
 
-	PRINTK(KERN_INFO "entering mac_drv_tx_complete\n");
+	pr_debug(KERN_INFO "entering mac_drv_tx_complete\n");
 	// Check if this TxD points to a skb
 
 	if (!(skb = txd->txd_os.skb)) {
-		PRINTK("TXD with no skb assigned.\n");
+		pr_debug("TXD with no skb assigned.\n");
 		return;
 	}
 	txd->txd_os.skb = NULL;
@@ -1536,7 +1530,7 @@ void mac_drv_tx_complete(struct s_smc *smc, volatile struct s_smt_fp_txd *txd)
 	// free the skb
 	dev_kfree_skb_irq(skb);
 
-	PRINTK(KERN_INFO "leaving mac_drv_tx_complete\n");
+	pr_debug(KERN_INFO "leaving mac_drv_tx_complete\n");
 }				// mac_drv_tx_complete
 
 
@@ -1603,7 +1597,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 	unsigned short ri;
 	u_int RifLength;
 
-	PRINTK(KERN_INFO "entering mac_drv_rx_complete (len=%d)\n", len);
+	pr_debug(KERN_INFO "entering mac_drv_rx_complete (len=%d)\n", len);
 	if (frag_count != 1) {	// This is not allowed to happen.
 
 		printk("fddi: Multi-fragment receive!\n");
@@ -1612,7 +1606,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 	}
 	skb = rxd->rxd_os.skb;
 	if (!skb) {
-		PRINTK(KERN_INFO "No skb in rxd\n");
+		pr_debug(KERN_INFO "No skb in rxd\n");
 		smc->os.MacStat.gen.rx_errors++;
 		goto RequeueRxd;
 	}
@@ -1642,7 +1636,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 	else {
 		int n;
 // goos: RIF removal has still to be tested
-		PRINTK(KERN_INFO "RIF found\n");
+		pr_debug(KERN_INFO "RIF found\n");
 		// Get RIF length from Routing Control (RC) field.
 		cp = virt + FDDI_MAC_HDR_LEN;	// Point behind MAC header.
 
@@ -1687,7 +1681,7 @@ void mac_drv_rx_complete(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 	return;
 
       RequeueRxd:
-	PRINTK(KERN_INFO "Rx: re-queue RXD.\n");
+	pr_debug(KERN_INFO "Rx: re-queue RXD.\n");
 	mac_drv_requeue_rxd(smc, rxd, frag_count);
 	smc->os.MacStat.gen.rx_errors++;	// Count receive packets
 						// not indicated.
@@ -1736,7 +1730,7 @@ void mac_drv_requeue_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 		skb = src_rxd->rxd_os.skb;
 		if (skb == NULL) {	// this should not happen
 
-			PRINTK("Requeue with no skb in rxd!\n");
+			pr_debug("Requeue with no skb in rxd!\n");
 			skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
 			if (skb) {
 				// we got a skb
@@ -1751,7 +1745,7 @@ void mac_drv_requeue_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 				rxd->rxd_os.dma_addr = b_addr;
 			} else {
 				// no skb available, use local buffer
-				PRINTK("Queueing invalid buffer!\n");
+				pr_debug("Queueing invalid buffer!\n");
 				rxd->rxd_os.skb = NULL;
 				v_addr = smc->os.LocalRxBuffer;
 				b_addr = smc->os.LocalRxBufferDMA;
@@ -1798,7 +1792,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
 	struct sk_buff *skb;
 	volatile struct s_smt_fp_rxd *rxd;
 
-	PRINTK(KERN_INFO "entering mac_drv_fill_rxd\n");
+	pr_debug(KERN_INFO "entering mac_drv_fill_rxd\n");
 
 	// Walk through the list of free receive buffers, passing receive
 	// buffers to the HWM as long as RXDs are available.
@@ -1806,7 +1800,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
 	MaxFrameSize = smc->os.MaxFrameSize;
 	// Check if there is any RXD left.
 	while (HWM_GET_RX_FREE(smc) > 0) {
-		PRINTK(KERN_INFO ".\n");
+		pr_debug(KERN_INFO ".\n");
 
 		rxd = HWM_GET_CURR_RXD(smc);
 		skb = alloc_skb(MaxFrameSize + 3, GFP_ATOMIC);
@@ -1826,7 +1820,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
 			// keep the receiver running in hope of better times.
 			// Multiple descriptors may point to this local buffer,
 			// so data in it must be considered invalid.
-			PRINTK("Queueing invalid buffer!\n");
+			pr_debug("Queueing invalid buffer!\n");
 			v_addr = smc->os.LocalRxBuffer;
 			b_addr = smc->os.LocalRxBufferDMA;
 		}
@@ -1837,7 +1831,7 @@ void mac_drv_fill_rxd(struct s_smc *smc)
 		hwm_rx_frag(smc, v_addr, b_addr, MaxFrameSize,
 			    FIRST_FRAG | LAST_FRAG);
 	}
-	PRINTK(KERN_INFO "leaving mac_drv_fill_rxd\n");
+	pr_debug(KERN_INFO "leaving mac_drv_fill_rxd\n");
 }				// mac_drv_fill_rxd
 
 
@@ -1863,7 +1857,7 @@ void mac_drv_clear_rxd(struct s_smc *smc, volatile struct s_smt_fp_rxd *rxd,
 
 	struct sk_buff *skb;
 
-	PRINTK("entering mac_drv_clear_rxd\n");
+	pr_debug("entering mac_drv_clear_rxd\n");
 
 	if (frag_count != 1)	// This is not allowed to happen.
 
@@ -1919,19 +1913,19 @@ int mac_drv_rx_init(struct s_smc *smc, int len, int fc,
 {
 	struct sk_buff *skb;
 
-	PRINTK("entering mac_drv_rx_init(len=%d)\n", len);
+	pr_debug("entering mac_drv_rx_init(len=%d)\n", len);
 
 	// "Received" a SMT or NSA frame of the local SMT.
 
 	if (len != la_len || len < FDDI_MAC_HDR_LEN || !look_ahead) {
-		PRINTK("fddi: Discard invalid local SMT frame\n");
-		PRINTK("  len=%d, la_len=%d, (ULONG) look_ahead=%08lXh.\n",
+		pr_debug("fddi: Discard invalid local SMT frame\n");
+		pr_debug("  len=%d, la_len=%d, (ULONG) look_ahead=%08lXh.\n",
 		       len, la_len, (unsigned long) look_ahead);
 		return (0);
 	}
 	skb = alloc_skb(len + 3, GFP_ATOMIC);
 	if (!skb) {
-		PRINTK("fddi: Local SMT: skb memory exhausted.\n");
+		pr_debug("fddi: Local SMT: skb memory exhausted.\n");
 		return (0);
 	}
 	skb_reserve(skb, 3);
@@ -1981,40 +1975,40 @@ void smt_timer_poll(struct s_smc *smc)
  ************************/
 void ring_status_indication(struct s_smc *smc, u_long status)
 {
-	PRINTK("ring_status_indication( ");
+	pr_debug("ring_status_indication( ");
 	if (status & RS_RES15)
-		PRINTK("RS_RES15 ");
+		pr_debug("RS_RES15 ");
 	if (status & RS_HARDERROR)
-		PRINTK("RS_HARDERROR ");
+		pr_debug("RS_HARDERROR ");
 	if (status & RS_SOFTERROR)
-		PRINTK("RS_SOFTERROR ");
+		pr_debug("RS_SOFTERROR ");
 	if (status & RS_BEACON)
-		PRINTK("RS_BEACON ");
+		pr_debug("RS_BEACON ");
 	if (status & RS_PATHTEST)
-		PRINTK("RS_PATHTEST ");
+		pr_debug("RS_PATHTEST ");
 	if (status & RS_SELFTEST)
-		PRINTK("RS_SELFTEST ");
+		pr_debug("RS_SELFTEST ");
 	if (status & RS_RES9)
-		PRINTK("RS_RES9 ");
+		pr_debug("RS_RES9 ");
 	if (status & RS_DISCONNECT)
-		PRINTK("RS_DISCONNECT ");
+		pr_debug("RS_DISCONNECT ");
 	if (status & RS_RES7)
-		PRINTK("RS_RES7 ");
+		pr_debug("RS_RES7 ");
 	if (status & RS_DUPADDR)
-		PRINTK("RS_DUPADDR ");
+		pr_debug("RS_DUPADDR ");
 	if (status & RS_NORINGOP)
-		PRINTK("RS_NORINGOP ");
+		pr_debug("RS_NORINGOP ");
 	if (status & RS_VERSION)
-		PRINTK("RS_VERSION ");
+		pr_debug("RS_VERSION ");
 	if (status & RS_STUCKBYPASSS)
-		PRINTK("RS_STUCKBYPASSS ");
+		pr_debug("RS_STUCKBYPASSS ");
 	if (status & RS_EVENT)
-		PRINTK("RS_EVENT ");
+		pr_debug("RS_EVENT ");
 	if (status & RS_RINGOPCHANGE)
-		PRINTK("RS_RINGOPCHANGE ");
+		pr_debug("RS_RINGOPCHANGE ");
 	if (status & RS_RES0)
-		PRINTK("RS_RES0 ");
-	PRINTK("]\n");
+		pr_debug("RS_RES0 ");
+	pr_debug("]\n");
 }				// ring_status_indication
 
 
@@ -2057,17 +2051,17 @@ void smt_stat_counter(struct s_smc *smc, int stat)
 {
 //      BOOLEAN RingIsUp ;
 
-	PRINTK(KERN_INFO "smt_stat_counter\n");
+	pr_debug(KERN_INFO "smt_stat_counter\n");
 	switch (stat) {
 	case 0:
-		PRINTK(KERN_INFO "Ring operational change.\n");
+		pr_debug(KERN_INFO "Ring operational change.\n");
 		break;
 	case 1:
-		PRINTK(KERN_INFO "Receive fifo overflow.\n");
+		pr_debug(KERN_INFO "Receive fifo overflow.\n");
 		smc->os.MacStat.gen.rx_errors++;
 		break;
 	default:
-		PRINTK(KERN_INFO "Unknown status (%d).\n", stat);
+		pr_debug(KERN_INFO "Unknown status (%d).\n", stat);
 		break;
 	}
 }				// smt_stat_counter
@@ -2123,10 +2117,10 @@ void cfm_state_change(struct s_smc *smc, int c_state)
 		s = "SC11_C_WRAP_S";
 		break;
 	default:
-		PRINTK(KERN_INFO "cfm_state_change: unknown %d\n", c_state);
+		pr_debug(KERN_INFO "cfm_state_change: unknown %d\n", c_state);
 		return;
 	}
-	PRINTK(KERN_INFO "cfm_state_change: %s\n", s);
+	pr_debug(KERN_INFO "cfm_state_change: %s\n", s);
 #endif				// DRIVERDEBUG
 }				// cfm_state_change
 
@@ -2181,7 +2175,7 @@ void ecm_state_change(struct s_smc *smc, int e_state)
 		s = "unknown";
 		break;
 	}
-	PRINTK(KERN_INFO "ecm_state_change: %s\n", s);
+	pr_debug(KERN_INFO "ecm_state_change: %s\n", s);
 #endif				//DRIVERDEBUG
 }				// ecm_state_change
 
@@ -2236,7 +2230,7 @@ void rmt_state_change(struct s_smc *smc, int r_state)
 		s = "unknown";
 		break;
 	}
-	PRINTK(KERN_INFO "[rmt_state_change: %s]\n", s);
+	pr_debug(KERN_INFO "[rmt_state_change: %s]\n", s);
 #endif				// DRIVERDEBUG
 }				// rmt_state_change
 
@@ -2256,7 +2250,7 @@ void rmt_state_change(struct s_smc *smc, int r_state)
  ************************/
 void drv_reset_indication(struct s_smc *smc)
 {
-	PRINTK(KERN_INFO "entering drv_reset_indication\n");
+	pr_debug(KERN_INFO "entering drv_reset_indication\n");
 
 	smc->os.ResetRequested = TRUE;	// Set flag.
 
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index c11cdd08ec5..60d502eef4f 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2837,8 +2837,6 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 		netif_stop_queue(dev);
 	}
 
-	dev->trans_start = jiffies;
-
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a2ff9cb1e7a..6b5946fe8ae 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1690,7 +1690,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 
 	sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
 
-	dev->trans_start = jiffies;
 	return NETDEV_TX_OK;
 
 mapping_unwind:
diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c
index 8d36d40649e..c791ef76c1d 100644
--- a/drivers/net/smc-mca.c
+++ b/drivers/net/smc-mca.c
@@ -370,7 +370,7 @@ static int __init ultramca_probe(struct device *gen_dev)
 
 	outb(reg4, ioaddr + 4);
 
-	gen_dev->driver_data = dev;
+	dev_set_drvdata(gen_dev, dev);
 
 	/* The 8390 isn't at the base address, so fake the offset
 	 */
@@ -531,7 +531,7 @@ static int ultramca_close_card(struct net_device *dev)
 static int ultramca_remove(struct device *gen_dev)
 {
 	struct mca_device *mca_dev = to_mca_device(gen_dev);
-	struct net_device *dev = (struct net_device *)gen_dev->driver_data;
+	struct net_device *dev = dev_get_drvdata(gen_dev);
 
 	if (dev) {
 		/* NB: ultra_close_card() does free_irq */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 293610334a7..bc4976ac871 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1774,6 +1774,20 @@ static int __devinit smc911x_findirq(struct net_device *dev)
 	return probe_irq_off(cookie);
 }
 
+static const struct net_device_ops smc911x_netdev_ops = {
+	.ndo_open		= smc911x_open,
+	.ndo_stop		= smc911x_close,
+	.ndo_start_xmit		= smc911x_hard_start_xmit,
+	.ndo_tx_timeout		= smc911x_timeout,
+	.ndo_set_multicast_list	= smc911x_set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= smc911x_poll_controller,
+#endif
+};
+
 /*
  * Function: smc911x_probe(unsigned long ioaddr)
  *
@@ -1940,16 +1954,9 @@ static int __devinit smc911x_probe(struct net_device *dev)
 	/* Fill in the fields of the device structure with ethernet values. */
 	ether_setup(dev);
 
-	dev->open = smc911x_open;
-	dev->stop = smc911x_close;
-	dev->hard_start_xmit = smc911x_hard_start_xmit;
-	dev->tx_timeout = smc911x_timeout;
+	dev->netdev_ops = &smc911x_netdev_ops;
 	dev->watchdog_timeo = msecs_to_jiffies(watchdog);
-	dev->set_multicast_list = smc911x_set_multicast_list;
 	dev->ethtool_ops = &smc911x_ethtool_ops;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = smc911x_poll_controller;
-#endif
 
 	INIT_WORK(&lp->phy_configure, smc911x_phy_configure);
 	lp->mii.phy_id_mask = 0x1f;
diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c
index 9a7973a5411..e02471b2f2b 100644
--- a/drivers/net/smc9194.c
+++ b/drivers/net/smc9194.c
@@ -503,7 +503,7 @@ static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * de
 		/* THIS SHOULD NEVER HAPPEN. */
 		dev->stats.tx_aborted_errors++;
 		printk(CARDNAME": Bad Craziness - sent packet while busy.\n" );
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	lp->saved_skb = skb;
 
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 329f890e290..f1f773b17fe 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -45,7 +45,8 @@
     defined(CONFIG_MACH_ZYLONITE) ||\
     defined(CONFIG_MACH_LITTLETON) ||\
     defined(CONFIG_MACH_ZYLONITE2) ||\
-    defined(CONFIG_ARCH_VIPER)
+    defined(CONFIG_ARCH_VIPER) ||\
+    defined(CONFIG_MACH_STARGATE2)
 
 #include <asm/mach-types.h>
 
@@ -73,7 +74,7 @@
 /* We actually can't write halfwords properly if not word aligned */
 static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 {
-	if (machine_is_mainstone() && reg & 2) {
+	if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
 		unsigned int v = val << 16;
 		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
 		writel(v, ioaddr + (reg & ~2));
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index eb7db032a78..b60639bd181 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -47,6 +47,7 @@
 #include <linux/bitops.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/swab.h>
 #include <linux/phy.h>
 #include <linux/smsc911x.h>
 #include "smsc911x.h"
@@ -175,6 +176,12 @@ static inline void
 smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf,
 		      unsigned int wordcount)
 {
+	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+		while (wordcount--)
+			smsc911x_reg_write(pdata, TX_DATA_FIFO, swab32(*buf++));
+		return;
+	}
+
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
 		writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount);
 		return;
@@ -194,6 +201,12 @@ static inline void
 smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf,
 		     unsigned int wordcount)
 {
+	if (pdata->config.flags & SMSC911X_SWAP_FIFO) {
+		while (wordcount--)
+			*buf++ = swab32(smsc911x_reg_read(pdata, RX_DATA_FIFO));
+		return;
+	}
+
 	if (pdata->config.flags & SMSC911X_USE_32BIT) {
 		readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount);
 		return;
@@ -1963,7 +1976,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 		retval = -ENODEV;
 		goto out_0;
 	}
-	res_size = res->end - res->start;
+	res_size = res->end - res->start + 1;
 
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq_res) {
@@ -2096,12 +2109,58 @@ out_0:
 	return retval;
 }
 
+#ifdef CONFIG_PM
+/* This implementation assumes the devices remains powered on its VDDVARIO
+ * pins during suspend. */
+
+static int smsc911x_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct smsc911x_data *pdata = netdev_priv(dev);
+
+	/* enable wake on LAN, energy detection and the external PME
+	 * signal. */
+	smsc911x_reg_write(pdata, PMT_CTRL,
+		PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ |
+		PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_);
+
+	return 0;
+}
+
+static int smsc911x_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct smsc911x_data *pdata = netdev_priv(dev);
+	unsigned int to = 100;
+
+	/* Note 3.11 from the datasheet:
+	 * 	"When the LAN9220 is in a power saving state, a write of any
+	 * 	 data to the BYTE_TEST register will wake-up the device."
+	 */
+	smsc911x_reg_write(pdata, BYTE_TEST, 0);
+
+	/* poll the READY bit in PMT_CTRL. Any other access to the device is
+	 * forbidden while this bit isn't set. Try for 100ms and return -EIO
+	 * if it failed. */
+	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+		udelay(1000);
+
+	return (to == 0) ? -EIO : 0;
+}
+
+#else
+#define smsc911x_suspend	NULL
+#define smsc911x_resume		NULL
+#endif
+
 static struct platform_driver smsc911x_driver = {
 	.probe = smsc911x_drv_probe,
-	.remove = smsc911x_drv_remove,
+	.remove = __devexit_p(smsc911x_drv_remove),
 	.driver = {
 		.name = SMSC_CHIPNAME,
 	},
+	.suspend = smsc911x_suspend,
+	.resume = smsc911x_resume,
 };
 
 /* Entry point for loading the module */
diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c
index 211e805c122..e4255d82938 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/sonic.c
@@ -223,7 +223,7 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	if (!laddr) {
 		printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name);
 		dev_kfree_skb(skb);
-		return 1;
+		return NETDEV_TX_BUSY
 	}
 
 	sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0);       /* clear status */
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index fcb943fca4f..838cce8b8ff 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1236,7 +1236,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
 	 */
 	if ((np->cur_tx - np->dirty_tx) + skb_num_frags(skb) * 2 > TX_RING_SIZE) {
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 #if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE)
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index a39c0b9ba8b..7bb27426dbd 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -1023,7 +1023,7 @@ static int sun3_82586_send_packet(struct sk_buff *skb, struct net_device *dev)
 #if(NUM_XMIT_BUFFS > 1)
 	if(test_and_set_bit(0,(void *) &p->lock)) {
 		printk("%s: Queue was locked\n",dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	else
 #endif
diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c
index e5beb299cbd..534dfe3eef6 100644
--- a/drivers/net/sun3lance.c
+++ b/drivers/net/sun3lance.c
@@ -294,6 +294,16 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops lance_netdev_ops = {
+	.ndo_open		= lance_open,
+	.ndo_stop		= lance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_mac_address	= NULL,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init lance_probe( struct net_device *dev)
 {
 	unsigned long ioaddr;
@@ -397,12 +407,7 @@ static int __init lance_probe( struct net_device *dev)
 	if (did_version++ == 0)
 		printk( version );
 
-	/* The LANCE-specific entries in the device structure. */
-	dev->open = &lance_open;
-	dev->hard_start_xmit = &lance_start_xmit;
-	dev->stop = &lance_close;
-	dev->set_multicast_list = &set_multicast_list;
-	dev->set_mac_address = NULL;
+	dev->netdev_ops = &lance_netdev_ops;
 //	KLUDGE -- REMOVE ME
 	set_bit(__LINK_STATE_PRESENT, &dev->state);
 
@@ -521,7 +526,7 @@ static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
 	if (netif_queue_stopped(dev)) {
 		int tickssofar = jiffies - dev->trans_start;
 		if (tickssofar < 20)
-			return( 1 );
+			return NETDEV_TX_BUSY;
 
 		DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
 					  dev->name, DREG ));
@@ -572,7 +577,7 @@ static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
 	if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
 		printk( "%s: tx queue lock!.\n", dev->name);
 		/* don't clear dev->tbusy flag. */
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	AREG = CSR0;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index c399b1955c1..545f81b34ad 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -369,7 +369,6 @@ struct netdev_private {
 	struct sk_buff* tx_skbuff[TX_RING_SIZE];
         dma_addr_t tx_ring_dma;
         dma_addr_t rx_ring_dma;
-	struct net_device_stats stats;
 	struct timer_list timer;		/* Media monitoring timer. */
 	/* Frequently used values: keep some adjacent for cache effect. */
 	spinlock_t lock;
@@ -975,7 +974,7 @@ static void tx_timeout(struct net_device *dev)
 	dev->if_port = 0;
 
 	dev->trans_start = jiffies;
-	np->stats.tx_errors++;
+	dev->stats.tx_errors++;
 	if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
 		netif_wake_queue(dev);
 	}
@@ -1123,7 +1122,7 @@ reset_tx (struct net_device *dev)
 			else
 				dev_kfree_skb (skb);
 			np->tx_skbuff[i] = NULL;
-			np->stats.tx_dropped++;
+			dev->stats.tx_dropped++;
 		}
 	}
 	np->cur_tx = np->dirty_tx = 0;
@@ -1181,15 +1180,15 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 					if (netif_msg_tx_err(np))
 						printk("%s: Transmit error status %4.4x.\n",
 							   dev->name, tx_status);
-					np->stats.tx_errors++;
+					dev->stats.tx_errors++;
 					if (tx_status & 0x10)
-						np->stats.tx_fifo_errors++;
+						dev->stats.tx_fifo_errors++;
 					if (tx_status & 0x08)
-						np->stats.collisions++;
+						dev->stats.collisions++;
 					if (tx_status & 0x04)
-						np->stats.tx_fifo_errors++;
+						dev->stats.tx_fifo_errors++;
 					if (tx_status & 0x02)
-						np->stats.tx_window_errors++;
+						dev->stats.tx_window_errors++;
 
 					/*
 					** This reset has been verified on
@@ -1313,11 +1312,15 @@ static void rx_poll(unsigned long data)
 			if (netif_msg_rx_err(np))
 				printk(KERN_DEBUG "  netdev_rx() Rx error was %8.8x.\n",
 					   frame_status);
-			np->stats.rx_errors++;
-			if (frame_status & 0x00100000) np->stats.rx_length_errors++;
-			if (frame_status & 0x00010000) np->stats.rx_fifo_errors++;
-			if (frame_status & 0x00060000) np->stats.rx_frame_errors++;
-			if (frame_status & 0x00080000) np->stats.rx_crc_errors++;
+			dev->stats.rx_errors++;
+			if (frame_status & 0x00100000)
+				dev->stats.rx_length_errors++;
+			if (frame_status & 0x00010000)
+				dev->stats.rx_fifo_errors++;
+			if (frame_status & 0x00060000)
+				dev->stats.rx_frame_errors++;
+			if (frame_status & 0x00080000)
+				dev->stats.rx_crc_errors++;
 			if (frame_status & 0x00100000) {
 				printk(KERN_WARNING "%s: Oversized Ethernet frame,"
 					   " status %8.8x.\n",
@@ -1485,22 +1488,22 @@ static struct net_device_stats *get_stats(struct net_device *dev)
 	   the vulnerability window is very small and statistics are
 	   non-critical. */
 	/* The chip only need report frame silently dropped. */
-	np->stats.rx_missed_errors	+= ioread8(ioaddr + RxMissed);
-	np->stats.tx_packets += ioread16(ioaddr + TxFramesOK);
-	np->stats.rx_packets += ioread16(ioaddr + RxFramesOK);
-	np->stats.collisions += ioread8(ioaddr + StatsLateColl);
-	np->stats.collisions += ioread8(ioaddr + StatsMultiColl);
-	np->stats.collisions += ioread8(ioaddr + StatsOneColl);
-	np->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError);
+	dev->stats.rx_missed_errors	+= ioread8(ioaddr + RxMissed);
+	dev->stats.tx_packets += ioread16(ioaddr + TxFramesOK);
+	dev->stats.rx_packets += ioread16(ioaddr + RxFramesOK);
+	dev->stats.collisions += ioread8(ioaddr + StatsLateColl);
+	dev->stats.collisions += ioread8(ioaddr + StatsMultiColl);
+	dev->stats.collisions += ioread8(ioaddr + StatsOneColl);
+	dev->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError);
 	ioread8(ioaddr + StatsTxDefer);
 	for (i = StatsTxDefer; i <= StatsMcastRx; i++)
 		ioread8(ioaddr + i);
-	np->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow);
-	np->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16;
-	np->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow);
-	np->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16;
+	dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow);
+	dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16;
+	dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow);
+	dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16;
 
-	return &np->stats;
+	return &dev->stats;
 }
 
 static void set_rx_mode(struct net_device *dev)
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 4e9bd380a5c..4ef729198e1 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2275,7 +2275,7 @@ static int happy_meal_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irq(&hp->happy_lock);
 		printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n",
 		       dev->name);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	entry = hp->tx_new;
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 0ce2db6ce2b..d737f6b8f87 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -688,14 +688,11 @@ static void tc_handle_link_change(struct net_device *dev)
 
 	if (status_change && netif_msg_link(lp)) {
 		phy_print_status(phydev);
-#ifdef DEBUG
-		printk(KERN_DEBUG
-		       "%s: MII BMCR %04x BMSR %04x LPA %04x\n",
-		       dev->name,
-		       phy_read(phydev, MII_BMCR),
-		       phy_read(phydev, MII_BMSR),
-		       phy_read(phydev, MII_LPA));
-#endif
+		pr_debug("%s: MII BMCR %04x BMSR %04x LPA %04x\n",
+			 dev->name,
+			 phy_read(phydev, MII_BMCR),
+			 phy_read(phydev, MII_BMSR),
+			 phy_read(phydev, MII_LPA));
 	}
 }
 
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 7f4a9683ba1..3c2679cd196 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -948,8 +948,7 @@ static void print_rxfd(struct rxf_desc *rxfd);
 
 static void bdx_rxdb_destroy(struct rxdb *db)
 {
-	if (db)
-		vfree(db);
+	vfree(db);
 }
 
 static struct rxdb *bdx_rxdb_create(int nelem)
@@ -1482,10 +1481,8 @@ static void bdx_tx_db_close(struct txdb *d)
 {
 	BDX_ASSERT(d == NULL);
 
-	if (d->start) {
-		vfree(d->start);
-		d->start = NULL;
-	}
+	vfree(d->start);
+	d->start = NULL;
 }
 
 /*************************************************************************
@@ -1718,8 +1715,9 @@ static int bdx_tx_transmit(struct sk_buff *skb, struct net_device *ndev)
 	WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
 
 #endif
-	ndev->trans_start = jiffies;
-
+#ifdef BDX_LLTX
+	ndev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
+#endif
 	priv->net_stats.tx_packets++;
 	priv->net_stats.tx_bytes += skb->len;
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 201be425643..46a3f86125b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.98"
-#define DRV_MODULE_RELDATE	"February 25, 2009"
+#define DRV_MODULE_VERSION	"3.99"
+#define DRV_MODULE_RELDATE	"April 20, 2009"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -1950,7 +1950,8 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 				     GRC_LCLCTRL_GPIO_OUTPUT0 |
 				     GRC_LCLCTRL_GPIO_OUTPUT1),
 				    100);
-		} else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+		} else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||
+			   tp->pdev->device == TG3PCI_DEVICE_TIGON3_5761S) {
 			/* The 5761 non-e device swaps GPIO 0 and GPIO 2. */
 			u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
 					     GRC_LCLCTRL_GPIO_OE1 |
@@ -2455,8 +2456,6 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		}
 	}
 
-	__tg3_set_mac_addr(tp, 0);
-
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
 		u32 val;
 
@@ -4656,6 +4655,7 @@ static int tg3_poll(struct napi_struct *napi, int budget)
 			 * so we must read it before checking for more work.
 			 */
 			tp->last_tag = sblk->status_tag;
+			tp->last_irq_tag = tp->last_tag;
 			rmb();
 		} else
 			sblk->status &= ~SD_STATUS_UPDATED;
@@ -4811,7 +4811,7 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
 	 * Reading the PCI State register will confirm whether the
 	 * interrupt is ours and will flush the status block.
 	 */
-	if (unlikely(sblk->status_tag == tp->last_tag)) {
+	if (unlikely(sblk->status_tag == tp->last_irq_tag)) {
 		if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
 		    (tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
 			handled = 0;
@@ -4831,18 +4831,22 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
 	 * excessive spurious interrupts can be worse in some cases.
 	 */
 	tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
+
+	/*
+	 * In a shared interrupt configuration, sometimes other devices'
+	 * interrupts will scream.  We record the current status tag here
+	 * so that the above check can report that the screaming interrupts
+	 * are unhandled.  Eventually they will be silenced.
+	 */
+	tp->last_irq_tag = sblk->status_tag;
+
 	if (tg3_irq_sync(tp))
 		goto out;
-	if (napi_schedule_prep(&tp->napi)) {
-		prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
-		/* Update last_tag to mark that this status has been
-		 * seen. Because interrupt may be shared, we may be
-		 * racing with tg3_poll(), so only update last_tag
-		 * if tg3_poll() is not scheduled.
-		 */
-		tp->last_tag = sblk->status_tag;
-		__napi_schedule(&tp->napi);
-	}
+
+	prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
+
+	napi_schedule(&tp->napi);
+
 out:
 	return IRQ_RETVAL(handled);
 }
@@ -5017,7 +5021,7 @@ static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
 		/* New SKB is guaranteed to be linear. */
 		entry = *start;
 		ret = skb_dma_map(&tp->pdev->dev, new_skb, DMA_TO_DEVICE);
-		new_addr = skb_shinfo(new_skb)->dma_maps[0];
+		new_addr = skb_shinfo(new_skb)->dma_head;
 
 		/* Make sure new skb does not cross any 4G boundaries.
 		 * Drop the packet if it does.
@@ -5151,7 +5155,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	sp = skb_shinfo(skb);
 
-	mapping = sp->dma_maps[0];
+	mapping = sp->dma_head;
 
 	tp->tx_buffers[entry].skb = skb;
 
@@ -5169,7 +5173,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 			len = frag->size;
-			mapping = sp->dma_maps[i + 1];
+			mapping = sp->dma_maps[i];
 			tp->tx_buffers[entry].skb = NULL;
 
 			tg3_set_txd(tp, entry, mapping, len,
@@ -5190,9 +5194,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 out_unlock:
-    	mmiowb();
-
-	dev->trans_start = jiffies;
+	mmiowb();
 
 	return NETDEV_TX_OK;
 }
@@ -5329,7 +5331,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
 
 	sp = skb_shinfo(skb);
 
-	mapping = sp->dma_maps[0];
+	mapping = sp->dma_head;
 
 	tp->tx_buffers[entry].skb = skb;
 
@@ -5354,7 +5356,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 			len = frag->size;
-			mapping = sp->dma_maps[i + 1];
+			mapping = sp->dma_maps[i];
 
 			tp->tx_buffers[entry].skb = NULL;
 
@@ -5403,9 +5405,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
 	}
 
 out_unlock:
-    	mmiowb();
-
-	dev->trans_start = jiffies;
+	mmiowb();
 
 	return NETDEV_TX_OK;
 }
@@ -6156,6 +6156,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tp->hw_status->status_tag = 0;
 	}
 	tp->last_tag = 0;
+	tp->last_irq_tag = 0;
 	smp_mb();
 	synchronize_irq(tp->pdev->irq);
 
@@ -6350,6 +6351,8 @@ static int tg3_halt(struct tg3 *tp, int kind, int silent)
 	tg3_abort_hw(tp, silent);
 	err = tg3_chip_reset(tp);
 
+	__tg3_set_mac_addr(tp, 0);
+
 	tg3_write_sig_legacy(tp, kind);
 	tg3_write_sig_post_reset(tp, kind);
 
@@ -6711,6 +6714,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tw32(TG3_CPMU_HST_ACC, val);
 	}
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
+		val = tr32(PCIE_PWR_MGMT_THRESH) & ~PCIE_PWR_MGMT_L1_THRESH_MSK;
+		val |= PCIE_PWR_MGMT_EXT_ASPM_TMR_EN |
+		       PCIE_PWR_MGMT_L1_THRESH_4MS;
+		tw32(PCIE_PWR_MGMT_THRESH, val);
+	}
+
 	/* This works around an issue with Athlon chipsets on
 	 * B3 tigon3 silicon.  This bit has no effect on any
 	 * other revision.  But do not set this on PCI Express
@@ -7138,7 +7148,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	udelay(100);
 
 	tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
-	tp->last_tag = 0;
 
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
 		tw32_f(DMAC_MODE, DMAC_MODE_ENABLE);
@@ -8539,6 +8548,9 @@ static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 	u32 i, offset, len, b_offset, b_count;
 	__be32 val;
 
+	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+		return -EINVAL;
+
 	if (tp->link_config.phy_is_low_power)
 		return -EAGAIN;
 
@@ -8604,7 +8616,8 @@ static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 	if (tp->link_config.phy_is_low_power)
 		return -EAGAIN;
 
-	if (eeprom->magic != TG3_EEPROM_MAGIC)
+	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
+	    eeprom->magic != TG3_EEPROM_MAGIC)
 		return -EINVAL;
 
 	offset = eeprom->offset;
@@ -9201,6 +9214,9 @@ static int tg3_test_nvram(struct tg3 *tp)
 	__be32 *buf;
 	int i, j, k, err = 0, size;
 
+	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
+		return 0;
+
 	if (tg3_nvram_read(tp, 0, &magic) != 0)
 		return -EIO;
 
@@ -10183,7 +10199,8 @@ static void __devinit tg3_get_nvram_size(struct tg3 *tp)
 {
 	u32 val;
 
-	if (tg3_nvram_read(tp, 0, &val) != 0)
+	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
+	    tg3_nvram_read(tp, 0, &val) != 0)
 		return;
 
 	/* Selfboot format */
@@ -10565,6 +10582,7 @@ static void __devinit tg3_get_57780_nvram_info(struct tg3 *tp)
 		}
 		break;
 	default:
+		tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM;
 		return;
 	}
 
@@ -11365,7 +11383,8 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 	unsigned int i;
 	u32 magic;
 
-	if (tg3_nvram_read(tp, 0x0, &magic))
+	if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
+	    tg3_nvram_read(tp, 0x0, &magic))
 		goto out_not_found;
 
 	if (magic == TG3_EEPROM_MAGIC) {
@@ -11457,6 +11476,15 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 out_not_found:
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		strcpy(tp->board_part_number, "BCM95906");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57780)
+		strcpy(tp->board_part_number, "BCM57780");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57760)
+		strcpy(tp->board_part_number, "BCM57760");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
+		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790)
+		strcpy(tp->board_part_number, "BCM57790");
 	else
 		strcpy(tp->board_part_number, "none");
 }
@@ -11667,6 +11695,14 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
 {
 	u32 val;
 
+	if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) {
+		tp->fw_ver[0] = 's';
+		tp->fw_ver[1] = 'b';
+		tp->fw_ver[2] = '\0';
+
+		return;
+	}
+
 	if (tg3_nvram_read(tp, 0, &val))
 		return;
 
@@ -11952,7 +11988,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 				tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_2;
 			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
 			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
-			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+			    tp->pci_chip_rev_id == CHIPREV_ID_57780_A0 ||
+			    tp->pci_chip_rev_id == CHIPREV_ID_57780_A1)
 				tp->tg3_flags3 |= TG3_FLG3_CLKREQ_BUG;
 		}
 	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
@@ -12144,7 +12181,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
 
-	if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+	if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||
+	    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5761S) {
 		/* Turn off the debug UART. */
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
 		if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
@@ -12454,7 +12492,8 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 	}
 	if (!addr_ok) {
 		/* Next, try NVRAM. */
-		if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
+		if (!(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) &&
+		    !tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
 		    !tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) {
 			memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
 			memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index cb4c62abdd2..b3347c41a1a 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -95,6 +95,8 @@
 #define  CHIPREV_ID_5752_A1		 0x6001
 #define  CHIPREV_ID_5714_A2		 0x9002
 #define  CHIPREV_ID_5906_A1		 0xc001
+#define  CHIPREV_ID_57780_A0		 0x57780000
+#define  CHIPREV_ID_57780_A1		 0x57780001
 #define  GET_ASIC_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 12)
 #define   ASIC_REV_5700			 0x07
 #define   ASIC_REV_5701			 0x00
@@ -1697,6 +1699,8 @@
 
 #define PCIE_PWR_MGMT_THRESH		0x00007d28
 #define PCIE_PWR_MGMT_L1_THRESH_MSK	 0x0000ff00
+#define PCIE_PWR_MGMT_L1_THRESH_4MS	 0x0000ff00
+#define PCIE_PWR_MGMT_EXT_ASPM_TMR_EN	 0x01000000
 
 
 /* OTP bit definitions */
@@ -2501,6 +2505,7 @@ struct tg3 {
 	struct tg3_hw_status		*hw_status;
 	dma_addr_t			status_mapping;
 	u32				last_tag;
+	u32				last_irq_tag;
 
 	u32				msg_enable;
 
@@ -2635,6 +2640,7 @@ struct tg3 {
 #define TG3_FLG3_CLKREQ_BUG		0x00000800
 #define TG3_FLG3_PHY_ENABLE_APD		0x00001000
 #define TG3_FLG3_5755_PLUS		0x00002000
+#define TG3_FLG3_NO_NVRAM		0x00004000
 
 	struct timer_list		timer;
 	u16				timer_counter;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index aa6964922d5..384cb5e2839 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1111,7 +1111,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 			  dev->name, priv->txHead, priv->txTail );
 		netif_stop_queue(dev);
 		priv->txBusyCount++;
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	tail_list->forward = 0;
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 534c0f38483..b40b6de2d08 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -79,7 +79,7 @@ MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
 MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
 MODULE_FIRMWARE(FW_NAME);
 
-/* Module paramters */
+/* Module parameters */
 
 /* Ring Speed 0,4,16 
  * 0 = Autosense   
@@ -1243,7 +1243,7 @@ static int xl_xmit(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	} else {
 		spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ; 
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 }
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 2e70ee8f145..b3715efdce5 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -169,7 +169,7 @@ static char *open_min_error[] = {
 	"Monitor Contention failer for RPL", "FDX Protocol Error"
 };
 
-/* Module paramters */
+/* Module parameters */
 
 /* Ring Speed 0,4,16
  * 0 = Autosense         
@@ -1187,7 +1187,7 @@ static int streamer_xmit(struct sk_buff *skb, struct net_device *dev)
 	} else {
 	        netif_stop_queue(dev);
 	        spin_unlock_irqrestore(&streamer_priv->streamer_lock,flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 }
 
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index d068a9d3688..451b54136ed 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
 				   "Reserved", "Reserved", "No Monitor Detected for RPL", 
 				   "Monitor Contention failer for RPL", "FDX Protocol Error"};
 
-/* Module paramters */
+/* Module parameters */
 
 MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; 
 MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; 
@@ -1055,7 +1055,7 @@ static int olympic_xmit(struct sk_buff *skb, struct net_device *dev)
 		return 0;
 	} else {
 		spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	} 
 
 }
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index a91d9c55d78..54ad4ed0337 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -4601,7 +4601,7 @@ static int smctr_send_packet(struct sk_buff *skb, struct net_device *dev)
         netif_stop_queue(dev);
 
         if(tp->QueueSkb == 0)
-                return (1);     /* Return with tbusy set: queue full */
+                return NETDEV_TX_BUSY;     /* Return with tbusy set: queue full */
 
         tp->QueueSkb--;
         skb_queue_tail(&tp->SendSkbQueue, skb);
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index b11bb72dc7a..a2eab72b507 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -633,7 +633,7 @@ static int tms380tr_hardware_send_packet(struct sk_buff *skb, struct net_device
 		if (tms380tr_debug > 0)
 			printk(KERN_DEBUG "%s: No free TPL\n", dev->name);
 		spin_unlock_irqrestore(&tp->lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	dmabuf = 0;
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index d913405bc39..1cc8cf4425d 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -27,6 +27,18 @@ config DE2104X
 	  To compile this driver as a module, choose M here. The module will
 	  be called de2104x.
 
+config DE2104X_DSL
+	int "Descriptor Skip Length in 32 bit longwords"
+	depends on DE2104X
+	range 0 31
+	default 0
+	help
+	  Setting this value allows to align ring buffer descriptors into their
+	  own cache lines. Value of 4 corresponds to the typical 32 byte line
+	  (the descriptor is 16 bytes). This is necessary on systems that lack
+	  cache coherence, an example is PowerMac 5500. Otherwise 0 is safe.
+	  Default is 0, and range is 0 to 31.
+
 config TULIP
 	tristate "DECchip Tulip (dc2114x) PCI support"
 	depends on PCI
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d4c5ecc51f7..81f054dbb88 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -82,6 +82,13 @@ MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copi
 				 NETIF_MSG_RX_ERR	| \
 				 NETIF_MSG_TX_ERR)
 
+/* Descriptor skip length in 32 bit longwords. */
+#ifndef CONFIG_DE2104X_DSL
+#define DSL			0
+#else
+#define DSL			CONFIG_DE2104X_DSL
+#endif
+
 #define DE_RX_RING_SIZE		64
 #define DE_TX_RING_SIZE		64
 #define DE_RING_BYTES		\
@@ -153,6 +160,7 @@ enum {
 	CmdReset		= (1 << 0),
 	CacheAlign16		= 0x00008000,
 	BurstLen4		= 0x00000400,
+	DescSkipLen		= (DSL << 2),
 
 	/* Rx/TxPoll bits */
 	NormalTxPoll		= (1 << 0),
@@ -246,7 +254,7 @@ static const u32 de_intr_mask =
  * Set the programmable burst length to 4 longwords for all:
  * DMA errors result without these values. Cache align 16 long.
  */
-static const u32 de_bus_mode = CacheAlign16 | BurstLen4;
+static const u32 de_bus_mode = CacheAlign16 | BurstLen4 | DescSkipLen;
 
 struct de_srom_media_block {
 	u8			opts;
@@ -266,6 +274,9 @@ struct de_desc {
 	__le32			opts2;
 	__le32			addr1;
 	__le32			addr2;
+#if DSL
+	__le32			skip[DSL];
+#endif
 };
 
 struct media_info {
@@ -601,7 +612,7 @@ static int de_start_xmit (struct sk_buff *skb, struct net_device *dev)
 	if (tx_free == 0) {
 		netif_stop_queue(dev);
 		spin_unlock_irq(&de->lock);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	tx_free--;
 
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index f9491bd787d..eb72d2e9ab3 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -1099,7 +1099,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
     struct pci_dev *pdev = NULL;
     int i, status=0;
 
-    gendev->driver_data = dev;
+    dev_set_drvdata(gendev, dev);
 
     /* Ensure we're not sleeping */
     if (lp->bus == EISA) {
@@ -1461,12 +1461,12 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     u_long iobase = dev->base_addr;
-    int status = 0;
+    int status = NETDEV_TX_OK;
     u_long flags = 0;
 
     netif_stop_queue(dev);
     if (!lp->tx_enable) {                   /* Cannot send for now */
-	return -1;
+	return NETDEV_TX_LOCKED;
     }
 
     /*
@@ -1480,7 +1480,7 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
 
     /* Test if cache is already locked - requeue skb if so */
     if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
-	return -1;
+	return NETDEV_TX_LOCKED;
 
     /* Transmit descriptor ring full or stale skb */
     if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) {
@@ -2094,7 +2094,7 @@ static int __devexit de4x5_eisa_remove (struct device *device)
 	struct net_device *dev;
 	u_long iobase;
 
-	dev = device->driver_data;
+	dev = dev_get_drvdata(device);
 	iobase = dev->base_addr;
 
 	unregister_netdev (dev);
@@ -2338,7 +2338,7 @@ static void __devexit de4x5_pci_remove (struct pci_dev *pdev)
 	struct net_device *dev;
 	u_long iobase;
 
-	dev = pdev->dev.driver_data;
+	dev = dev_get_drvdata(&pdev->dev);
 	iobase = dev->base_addr;
 
 	unregister_netdev (dev);
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index f2e669974c7..8e78f003f08 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -686,7 +686,7 @@ static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
 		spin_unlock_irqrestore(&db->lock, flags);
 		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n",
 		       db->tx_queue_cnt);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Disable NIC interrupt */
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 8761a5a5bd7..9277ce8febe 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -591,7 +591,7 @@ static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
 		spin_unlock_irqrestore(&db->lock, flags);
 		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	/* Disable NIC interrupt */
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 264e61404f3..842b1a2c40d 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1601,8 +1601,7 @@ static int w840_suspend (struct pci_dev *pdev, pm_message_t state)
 
 		/* no more hardware accesses behind this line. */
 
-		BUG_ON(np->csr6);
-		if (ioread32(ioaddr + IntrEnable)) BUG();
+		BUG_ON(np->csr6 || ioread32(ioaddr + IntrEnable));
 
 		/* pci_power_off(pdev, -1); */
 
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 735bf41c654..11a0ba47b67 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -540,31 +540,38 @@ static inline struct sk_buff *tun_alloc_skb(struct tun_struct *tun,
 
 /* Get packet from user space buffer */
 static __inline__ ssize_t tun_get_user(struct tun_struct *tun,
-				       struct iovec *iv, size_t count,
+				       const struct iovec *iv, size_t count,
 				       int noblock)
 {
 	struct tun_pi pi = { 0, cpu_to_be16(ETH_P_IP) };
 	struct sk_buff *skb;
 	size_t len = count, align = 0;
 	struct virtio_net_hdr gso = { 0 };
+	int offset = 0;
 
 	if (!(tun->flags & TUN_NO_PI)) {
 		if ((len -= sizeof(pi)) > count)
 			return -EINVAL;
 
-		if(memcpy_fromiovec((void *)&pi, iv, sizeof(pi)))
+		if (memcpy_fromiovecend((void *)&pi, iv, 0, sizeof(pi)))
 			return -EFAULT;
+		offset += sizeof(pi);
 	}
 
 	if (tun->flags & TUN_VNET_HDR) {
 		if ((len -= sizeof(gso)) > count)
 			return -EINVAL;
 
-		if (memcpy_fromiovec((void *)&gso, iv, sizeof(gso)))
+		if (memcpy_fromiovecend((void *)&gso, iv, offset, sizeof(gso)))
 			return -EFAULT;
 
+		if ((gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) &&
+		    gso.csum_start + gso.csum_offset + 2 > gso.hdr_len)
+			gso.hdr_len = gso.csum_start + gso.csum_offset + 2;
+
 		if (gso.hdr_len > len)
 			return -EINVAL;
+		offset += sizeof(gso);
 	}
 
 	if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) {
@@ -581,7 +588,7 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun,
 		return PTR_ERR(skb);
 	}
 
-	if (skb_copy_datagram_from_iovec(skb, 0, iv, len)) {
+	if (skb_copy_datagram_from_iovec(skb, 0, iv, offset, len)) {
 		tun->dev->stats.rx_dropped++;
 		kfree_skb(skb);
 		return -EFAULT;
@@ -673,7 +680,7 @@ static ssize_t tun_chr_aio_write(struct kiocb *iocb, const struct iovec *iv,
 
 	DBG(KERN_INFO "%s: tun_chr_write %ld\n", tun->dev->name, count);
 
-	result = tun_get_user(tun, (struct iovec *)iv, iov_length(iv, count),
+	result = tun_get_user(tun, iv, iov_length(iv, count),
 			      file->f_flags & O_NONBLOCK);
 
 	tun_put(tun);
@@ -683,7 +690,7 @@ static ssize_t tun_chr_aio_write(struct kiocb *iocb, const struct iovec *iv,
 /* Put packet to the user space buffer */
 static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 				       struct sk_buff *skb,
-				       struct iovec *iv, int len)
+				       const struct iovec *iv, int len)
 {
 	struct tun_pi pi = { 0, skb->protocol };
 	ssize_t total = 0;
@@ -697,7 +704,7 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 			pi.flags |= TUN_PKT_STRIP;
 		}
 
-		if (memcpy_toiovec(iv, (void *) &pi, sizeof(pi)))
+		if (memcpy_toiovecend(iv, (void *) &pi, 0, sizeof(pi)))
 			return -EFAULT;
 		total += sizeof(pi);
 	}
@@ -730,14 +737,15 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 			gso.csum_offset = skb->csum_offset;
 		} /* else everything is zero */
 
-		if (unlikely(memcpy_toiovec(iv, (void *)&gso, sizeof(gso))))
+		if (unlikely(memcpy_toiovecend(iv, (void *)&gso, total,
+					       sizeof(gso))))
 			return -EFAULT;
 		total += sizeof(gso);
 	}
 
 	len = min_t(int, skb->len, len);
 
-	skb_copy_datagram_iovec(skb, 0, iv, len);
+	skb_copy_datagram_const_iovec(skb, 0, iv, total, len);
 	total += len;
 
 	tun->dev->stats.tx_packets++;
@@ -792,7 +800,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
 		}
 		netif_wake_queue(tun->dev);
 
-		ret = tun_put_user(tun, skb, (struct iovec *) iv, len);
+		ret = tun_put_user(tun, skb, iv, len);
 		kfree_skb(skb);
 		break;
 	}
@@ -840,12 +848,12 @@ static void tun_sock_write_space(struct sock *sk)
 	if (!sock_writeable(sk))
 		return;
 
-	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
-		wake_up_interruptible_sync(sk->sk_sleep);
-
 	if (!test_and_clear_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags))
 		return;
 
+	if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+		wake_up_interruptible_sync(sk->sk_sleep);
+
 	tun = container_of(sk, struct tun_sock, sk)->tun;
 	kill_fasync(&tun->fasync, SIGIO, POLL_OUT);
 }
@@ -861,6 +869,52 @@ static struct proto tun_proto = {
 	.obj_size	= sizeof(struct tun_sock),
 };
 
+static int tun_flags(struct tun_struct *tun)
+{
+	int flags = 0;
+
+	if (tun->flags & TUN_TUN_DEV)
+		flags |= IFF_TUN;
+	else
+		flags |= IFF_TAP;
+
+	if (tun->flags & TUN_NO_PI)
+		flags |= IFF_NO_PI;
+
+	if (tun->flags & TUN_ONE_QUEUE)
+		flags |= IFF_ONE_QUEUE;
+
+	if (tun->flags & TUN_VNET_HDR)
+		flags |= IFF_VNET_HDR;
+
+	return flags;
+}
+
+static ssize_t tun_show_flags(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct tun_struct *tun = netdev_priv(to_net_dev(dev));
+	return sprintf(buf, "0x%x\n", tun_flags(tun));
+}
+
+static ssize_t tun_show_owner(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct tun_struct *tun = netdev_priv(to_net_dev(dev));
+	return sprintf(buf, "%d\n", tun->owner);
+}
+
+static ssize_t tun_show_group(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct tun_struct *tun = netdev_priv(to_net_dev(dev));
+	return sprintf(buf, "%d\n", tun->group);
+}
+
+static DEVICE_ATTR(tun_flags, 0444, tun_show_flags, NULL);
+static DEVICE_ATTR(owner, 0444, tun_show_owner, NULL);
+static DEVICE_ATTR(group, 0444, tun_show_group, NULL);
+
 static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 {
 	struct sock *sk;
@@ -870,6 +924,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 
 	dev = __dev_get_by_name(net, ifr->ifr_name);
 	if (dev) {
+		if (ifr->ifr_flags & IFF_TUN_EXCL)
+			return -EBUSY;
 		if ((ifr->ifr_flags & IFF_TUN) && dev->netdev_ops == &tun_netdev_ops)
 			tun = netdev_priv(dev);
 		else if ((ifr->ifr_flags & IFF_TAP) && dev->netdev_ops == &tap_netdev_ops)
@@ -944,6 +1000,11 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 		if (err < 0)
 			goto err_free_sk;
 
+		if (device_create_file(&tun->dev->dev, &dev_attr_tun_flags) ||
+		    device_create_file(&tun->dev->dev, &dev_attr_owner) ||
+		    device_create_file(&tun->dev->dev, &dev_attr_group))
+			printk(KERN_ERR "Failed to create tun sysfs files\n");
+
 		sk->sk_destruct = tun_sock_destruct;
 
 		err = tun_attach(tun, file);
@@ -996,21 +1057,7 @@ static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
 
 	strcpy(ifr->ifr_name, tun->dev->name);
 
-	ifr->ifr_flags = 0;
-
-	if (ifr->ifr_flags & TUN_TUN_DEV)
-		ifr->ifr_flags |= IFF_TUN;
-	else
-		ifr->ifr_flags |= IFF_TAP;
-
-	if (tun->flags & TUN_NO_PI)
-		ifr->ifr_flags |= IFF_NO_PI;
-
-	if (tun->flags & TUN_ONE_QUEUE)
-		ifr->ifr_flags |= IFF_ONE_QUEUE;
-
-	if (tun->flags & TUN_VNET_HDR)
-		ifr->ifr_flags |= IFF_VNET_HDR;
+	ifr->ifr_flags = tun_flags(tun);
 
 	tun_put(tun);
 	return 0;
@@ -1275,21 +1322,22 @@ static int tun_chr_open(struct inode *inode, struct file * file)
 static int tun_chr_close(struct inode *inode, struct file *file)
 {
 	struct tun_file *tfile = file->private_data;
-	struct tun_struct *tun = __tun_get(tfile);
+	struct tun_struct *tun;
 
 
+	rtnl_lock();
+	tun = __tun_get(tfile);
 	if (tun) {
 		DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
 
-		rtnl_lock();
 		__tun_detach(tun);
 
 		/* If desireable, unregister the netdevice. */
 		if (!(tun->flags & TUN_PERSIST))
 			unregister_netdevice(tun->dev);
 
-		rtnl_unlock();
 	}
+	rtnl_unlock();
 
 	tun = tfile->tun;
 	if (tun)
@@ -1318,6 +1366,7 @@ static const struct file_operations tun_fops = {
 static struct miscdevice tun_miscdev = {
 	.minor = TUN_MINOR,
 	.name = "tun",
+	.devnode = "net/tun",
 	.fops = &tun_fops,
 };
 
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 44f8392da11..e2f2e91cfdd 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *	   Li Yang <leoli@freescale.com>
@@ -27,6 +27,7 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/workqueue.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
 #include <asm/uaccess.h>
@@ -64,6 +65,8 @@
 
 static DEFINE_SPINLOCK(ugeth_lock);
 
+static void uec_configure_serdes(struct net_device *dev);
+
 static struct {
 	u32 msg_enable;
 } debug = { -1 };
@@ -270,7 +273,7 @@ static int fill_init_enet_entries(struct ucc_geth_private *ugeth,
 				  u8 num_entries,
 				  u32 thread_size,
 				  u32 thread_alignment,
-				  enum qe_risc_allocation risc,
+				  unsigned int risc,
 				  int skip_page_for_first_entry)
 {
 	u32 init_enet_offset;
@@ -307,7 +310,7 @@ static int fill_init_enet_entries(struct ucc_geth_private *ugeth,
 static int return_init_enet_entries(struct ucc_geth_private *ugeth,
 				    u32 *p_start,
 				    u8 num_entries,
-				    enum qe_risc_allocation risc,
+				    unsigned int risc,
 				    int skip_page_for_first_entry)
 {
 	u32 init_enet_offset;
@@ -342,7 +345,7 @@ static int dump_init_enet_entries(struct ucc_geth_private *ugeth,
 				  u32 __iomem *p_start,
 				  u8 num_entries,
 				  u32 thread_size,
-				  enum qe_risc_allocation risc,
+				  unsigned int risc,
 				  int skip_page_for_first_entry)
 {
 	u32 init_enet_offset;
@@ -1409,6 +1412,9 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
 		upsmr |= UCC_GETH_UPSMR_TBIM;
 	}
+	if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
+		upsmr |= UCC_GETH_UPSMR_SGMM;
+
 	out_be32(&uf_regs->upsmr, upsmr);
 
 	/* Disable autonegotiation in tbi mode, because by default it
@@ -1543,14 +1549,19 @@ static int init_phy(struct net_device *dev)
 	priv->oldspeed = 0;
 	priv->oldduplex = -1;
 
-	phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
-			     priv->phy_interface);
+	if (!ug_info->phy_node)
+		return 0;
 
-	if (IS_ERR(phydev)) {
+	phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
+				priv->phy_interface);
+	if (!phydev) {
 		printk("%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
+		return -ENODEV;
 	}
 
+	if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
+		uec_configure_serdes(dev);
+
 	phydev->supported &= (ADVERTISED_10baseT_Half |
 				 ADVERTISED_10baseT_Full |
 				 ADVERTISED_100baseT_Half |
@@ -1566,7 +1577,41 @@ static int init_phy(struct net_device *dev)
 	return 0;
 }
 
+/* Initialize TBI PHY interface for communicating with the
+ * SERDES lynx PHY on the chip.  We communicate with this PHY
+ * through the MDIO bus on each controller, treating it as a
+ * "normal" PHY at the address found in the UTBIPA register.  We assume
+ * that the UTBIPA register is valid.  Either the MDIO bus code will set
+ * it to a value that doesn't conflict with other PHYs on the bus, or the
+ * value doesn't matter, as there are no other PHYs on the bus.
+ */
+static void uec_configure_serdes(struct net_device *dev)
+{
+	struct ucc_geth_private *ugeth = netdev_priv(dev);
 
+	if (!ugeth->tbiphy) {
+		printk(KERN_WARNING "SGMII mode requires that the device "
+			"tree specify a tbi-handle\n");
+	return;
+	}
+
+	/*
+	 * If the link is already up, we must already be ok, and don't need to
+	 * configure and reset the TBI<->SerDes link.  Maybe U-Boot configured
+	 * everything for us?  Resetting it takes the link down and requires
+	 * several seconds for it to come back.
+	 */
+	if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+		return;
+
+	/* Single clk mode, mii mode off(for serdes communication) */
+	phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+
+	phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+	phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+
+}
 
 static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
 {
@@ -2135,6 +2180,14 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
 		return -ENOMEM;
 	}
 
+	/* read the number of risc engines, update the riscTx and riscRx
+	 * if there are 4 riscs in QE
+	 */
+	if (qe_get_num_of_risc() == 4) {
+		ug_info->riscTx = QE_RISC_ALLOCATION_FOUR_RISCS;
+		ug_info->riscRx = QE_RISC_ALLOCATION_FOUR_RISCS;
+	}
+
 	ugeth->ug_regs = ioremap(uf_info->regs, sizeof(*ugeth->ug_regs));
 	if (!ugeth->ug_regs) {
 		if (netif_msg_probe(ugeth))
@@ -3217,7 +3270,7 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ)
 		dev->stats.tx_packets++;
 
 		/* Free the sk buffer associated with this TxBD */
-		dev_kfree_skb_irq(ugeth->
+		dev_kfree_skb(ugeth->
 				  tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]);
 		ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]] = NULL;
 		ugeth->skb_dirtytx[txQ] =
@@ -3251,9 +3304,15 @@ static int ucc_geth_poll(struct napi_struct *napi, int budget)
 	for (i = 0; i < ug_info->numQueuesRx; i++)
 		howmany += ucc_geth_rx(ugeth, i, budget - howmany);
 
+	/* Tx event processing */
+	spin_lock(&ugeth->lock);
+	for (i = 0; i < ug_info->numQueuesTx; i++)
+		ucc_geth_tx(ugeth->ndev, i);
+	spin_unlock(&ugeth->lock);
+
 	if (howmany < budget) {
 		napi_complete(napi);
-		setbits32(ugeth->uccf->p_uccm, UCCE_RX_EVENTS);
+		setbits32(ugeth->uccf->p_uccm, UCCE_RX_EVENTS | UCCE_TX_EVENTS);
 	}
 
 	return howmany;
@@ -3267,8 +3326,6 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)
 	struct ucc_geth_info *ug_info;
 	register u32 ucce;
 	register u32 uccm;
-	register u32 tx_mask;
-	u8 i;
 
 	ugeth_vdbg("%s: IN", __func__);
 
@@ -3282,27 +3339,14 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)
 	out_be32(uccf->p_ucce, ucce);
 
 	/* check for receive events that require processing */
-	if (ucce & UCCE_RX_EVENTS) {
+	if (ucce & (UCCE_RX_EVENTS | UCCE_TX_EVENTS)) {
 		if (napi_schedule_prep(&ugeth->napi)) {
-			uccm &= ~UCCE_RX_EVENTS;
+			uccm &= ~(UCCE_RX_EVENTS | UCCE_TX_EVENTS);
 			out_be32(uccf->p_uccm, uccm);
 			__napi_schedule(&ugeth->napi);
 		}
 	}
 
-	/* Tx event processing */
-	if (ucce & UCCE_TX_EVENTS) {
-		spin_lock(&ugeth->lock);
-		tx_mask = UCC_GETH_UCCE_TXB0;
-		for (i = 0; i < ug_info->numQueuesTx; i++) {
-			if (ucce & tx_mask)
-				ucc_geth_tx(dev, i);
-			ucce &= ~tx_mask;
-			tx_mask <<= 1;
-		}
-		spin_unlock(&ugeth->lock);
-	}
-
 	/* Errors and other events */
 	if (ucce & UCCE_OTHER) {
 		if (ucce & UCC_GETH_UCCE_BSY)
@@ -3331,6 +3375,37 @@ static void ucc_netpoll(struct net_device *dev)
 }
 #endif /* CONFIG_NET_POLL_CONTROLLER */
 
+static int ucc_geth_set_mac_addr(struct net_device *dev, void *p)
+{
+	struct ucc_geth_private *ugeth = netdev_priv(dev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	/*
+	 * If device is not running, we will set mac addr register
+	 * when opening the device.
+	 */
+	if (!netif_running(dev))
+		return 0;
+
+	spin_lock_irq(&ugeth->lock);
+	init_mac_station_addr_regs(dev->dev_addr[0],
+				   dev->dev_addr[1],
+				   dev->dev_addr[2],
+				   dev->dev_addr[3],
+				   dev->dev_addr[4],
+				   dev->dev_addr[5],
+				   &ugeth->ug_regs->macstnaddr1,
+				   &ugeth->ug_regs->macstnaddr2);
+	spin_unlock_irq(&ugeth->lock);
+
+	return 0;
+}
+
 /* Called when something needs to use the ethernet device */
 /* Returns 0 for success. */
 static int ucc_geth_open(struct net_device *dev)
@@ -3498,6 +3573,8 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
 		return PHY_INTERFACE_MODE_RGMII_RXID;
 	if (strcasecmp(phy_connection_type, "rtbi") == 0)
 		return PHY_INTERFACE_MODE_RTBI;
+	if (strcasecmp(phy_connection_type, "sgmii") == 0)
+		return PHY_INTERFACE_MODE_SGMII;
 
 	return PHY_INTERFACE_MODE_MII;
 }
@@ -3507,7 +3584,7 @@ static const struct net_device_ops ucc_geth_netdev_ops = {
 	.ndo_stop		= ucc_geth_close,
 	.ndo_start_xmit		= ucc_geth_start_xmit,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_set_mac_address	= ucc_geth_set_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_multicast_list	= ucc_geth_set_multi,
 	.ndo_tx_timeout		= ucc_geth_timeout,
@@ -3520,14 +3597,12 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 {
 	struct device *device = &ofdev->dev;
 	struct device_node *np = ofdev->node;
-	struct device_node *mdio;
 	struct net_device *dev = NULL;
 	struct ucc_geth_private *ugeth = NULL;
 	struct ucc_geth_info *ug_info;
 	struct resource res;
 	struct device_node *phy;
 	int err, ucc_num, max_speed = 0;
-	const phandle *ph;
 	const u32 *fixed_link;
 	const unsigned int *prop;
 	const char *sprop;
@@ -3544,6 +3619,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
 		PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
 		PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
+		PHY_INTERFACE_MODE_SGMII,
 	};
 
 	ugeth_vdbg("%s: IN", __func__);
@@ -3627,40 +3703,13 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
 	fixed_link = of_get_property(np, "fixed-link", NULL);
 	if (fixed_link) {
-		snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
-			 PHY_ID_FMT, "0", fixed_link[0]);
 		phy = NULL;
 	} else {
-		char bus_name[MII_BUS_ID_SIZE];
-
-		ph = of_get_property(np, "phy-handle", NULL);
-		phy = of_find_node_by_phandle(*ph);
-
+		phy = of_parse_phandle(np, "phy-handle", 0);
 		if (phy == NULL)
 			return -ENODEV;
-
-		/* set the PHY address */
-		prop = of_get_property(phy, "reg", NULL);
-		if (prop == NULL)
-			return -1;
-
-		/* Set the bus id */
-		mdio = of_get_parent(phy);
-
-		if (mdio == NULL)
-			return -ENODEV;
-
-		err = of_address_to_resource(mdio, 0, &res);
-
-		if (err) {
-			of_node_put(mdio);
-			return err;
-		}
-		fsl_pq_mdio_bus_name(bus_name, mdio);
-		of_node_put(mdio);
-		snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
-			"%s:%02x", bus_name, *prop);
 	}
+	ug_info->phy_node = phy;
 
 	/* get the phy interface type, or default to MII */
 	prop = of_get_property(np, "phy-connection-type", NULL);
@@ -3686,6 +3735,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		case PHY_INTERFACE_MODE_RGMII_TXID:
 		case PHY_INTERFACE_MODE_TBI:
 		case PHY_INTERFACE_MODE_RTBI:
+		case PHY_INTERFACE_MODE_SGMII:
 			max_speed = SPEED_1000;
 			break;
 		default:
@@ -3702,7 +3752,15 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		ug_info->uf_info.utfet = UCC_GETH_UTFET_GIGA_INIT;
 		ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
 		ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4;
-		ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
+
+		/* If QE's snum number is 46 which means we need to support
+		 * 4 UECs at 1000Base-T simultaneously, we need to allocate
+		 * more Threads to Rx.
+		 */
+		if (qe_get_num_of_snums() == 46)
+			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6;
+		else
+			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
 	}
 
 	if (netif_msg_probe(&debug))
@@ -3735,7 +3793,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	dev->netdev_ops = &ucc_geth_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 	INIT_WORK(&ugeth->timeout_work, ucc_geth_timeout_work);
-	netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, UCC_GETH_DEV_WEIGHT);
+	netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, 64);
 	dev->mtu = 1500;
 
 	ugeth->msg_enable = netif_msg_init(debug.msg_enable, UGETH_MSG_DEFAULT);
@@ -3760,6 +3818,37 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	ugeth->ndev = dev;
 	ugeth->node = np;
 
+	/* Find the TBI PHY.  If it's not there, we don't support SGMII */
+	ph = of_get_property(np, "tbi-handle", NULL);
+	if (ph) {
+		struct device_node *tbi = of_find_node_by_phandle(*ph);
+		struct of_device *ofdev;
+		struct mii_bus *bus;
+		const unsigned int *id;
+
+		if (!tbi)
+			return 0;
+
+		mdio = of_get_parent(tbi);
+		if (!mdio)
+			return 0;
+
+		ofdev = of_find_device_by_node(mdio);
+
+		of_node_put(mdio);
+
+		id = of_get_property(tbi, "reg", NULL);
+		if (!id)
+			return 0;
+		of_node_put(tbi);
+
+		bus = dev_get_drvdata(&ofdev->dev);
+		if (!bus)
+			return 0;
+
+		ugeth->tbiphy = bus->phy_map[*id];
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 2f8ee7c87ef..5beba4c1453 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *
@@ -193,6 +193,31 @@ struct ucc_geth {
 #define	ENET_TBI_MII_JD		0x10	/* Jitter diagnostics */
 #define	ENET_TBI_MII_TBICON	0x11	/* TBI control */
 
+/* TBI MDIO register bit fields*/
+#define TBISR_LSTATUS          0x0004
+#define TBICON_CLK_SELECT       0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE  0x0080
+#define TBIANA_HALF_DUPLEX      0x0040
+#define TBIANA_FULL_DUPLEX      0x0020
+#define TBICR_PHY_RESET         0x8000
+#define TBICR_ANEG_ENABLE       0x1000
+#define TBICR_RESTART_ANEG      0x0200
+#define TBICR_FULL_DUPLEX       0x0100
+#define TBICR_SPEED1_SET        0x0040
+
+#define TBIANA_SETTINGS ( \
+		TBIANA_ASYMMETRIC_PAUSE \
+		| TBIANA_SYMMETRIC_PAUSE \
+		| TBIANA_FULL_DUPLEX \
+		)
+#define TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_ANEG_ENABLE \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
 /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
 #define MACCFG1_FLOW_RX                         0x00000020	/* Flow Control
 								   Rx */
@@ -852,7 +877,6 @@ struct ucc_geth_hardware_statistics {
 /* Driver definitions */
 #define TX_BD_RING_LEN                          0x10
 #define RX_BD_RING_LEN                          0x10
-#define UCC_GETH_DEV_WEIGHT                     TX_BD_RING_LEN
 
 #define TX_RING_MOD_MASK(size)                  (size-1)
 #define RX_RING_MOD_MASK(size)                  (size-1)
@@ -1100,7 +1124,7 @@ struct ucc_geth_info {
 	u32 eventRegMask;
 	u16 pausePeriod;
 	u16 extensionField;
-	char phy_bus_id[BUS_ID_SIZE];
+	struct device_node *phy_node;
 	u8 weightfactor[NUM_TX_QUEUES];
 	u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
 	u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
@@ -1120,8 +1144,8 @@ struct ucc_geth_info {
 	enum ucc_geth_maccfg2_pad_and_crc_mode padAndCrc;
 	enum ucc_geth_num_of_threads numThreadsTx;
 	enum ucc_geth_num_of_threads numThreadsRx;
-	enum qe_risc_allocation riscTx;
-	enum qe_risc_allocation riscRx;
+	unsigned int riscTx;
+	unsigned int riscRx;
 };
 
 /* structure representing UCC GETH */
@@ -1189,6 +1213,7 @@ struct ucc_geth_private {
 
 	struct ugeth_mii_info *mii_info;
 	struct phy_device *phydev;
+	struct phy_device *tbiphy;
 	phy_interface_t phy_interface;
 	int max_speed;
 	uint32_t msg_enable;
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6fcb500257b..61fe80dda3e 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
  *
  * Limitation:
  * Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index dfc6cf765fb..3717569828b 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -359,4 +359,12 @@ config USB_HSO
 	  To compile this driver as a module, choose M here: the
 	  module will be called hso.
 
+config USB_NET_INT51X1
+	tristate "Intellon PLC based usb adapter"
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a 14Mb USB-based PLC
+	  (Powerline Communications) solution with an Intellon
+	  INT51x1/INT5200 chip, like the "devolo dLan duo".
+
 endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index c8aef62cf2b..b870b0b1cbe 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_USB_NET_CDC_SUBSET)	+= cdc_subset.o
 obj-$(CONFIG_USB_NET_ZAURUS)	+= zaurus.o
 obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830.o
 obj-$(CONFIG_USB_USBNET)	+= usbnet.o
+obj-$(CONFIG_USB_NET_INT51X1)	+= int51x1.o
 
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 55e8ecc3a9e..01fd528306e 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/ctype.h>
 #include <linux/ethtool.h>
 #include <linux/workqueue.h>
 #include <linux/mii.h>
@@ -389,36 +388,6 @@ static void cdc_status(struct usbnet *dev, struct urb *urb)
 	}
 }
 
-static u8 nibble(unsigned char c)
-{
-	if (likely(isdigit(c)))
-		return c - '0';
-	c = toupper(c);
-	if (likely(isxdigit(c)))
-		return 10 + c - 'A';
-	return 0;
-}
-
-static inline int
-get_ethernet_addr(struct usbnet *dev, struct usb_cdc_ether_desc *e)
-{
-	int 		tmp, i;
-	unsigned char	buf [13];
-
-	tmp = usb_string(dev->udev, e->iMACAddress, buf, sizeof buf);
-	if (tmp != 12) {
-		dev_dbg(&dev->udev->dev,
-			"bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
-		if (tmp >= 0)
-			tmp = -EINVAL;
-		return tmp;
-	}
-	for (i = tmp = 0; i < 6; i++, tmp += 2)
-		dev->net->dev_addr [i] =
-			(nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]);
-	return 0;
-}
-
 static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int				status;
@@ -428,7 +397,7 @@ static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 	if (status < 0)
 		return status;
 
-	status = get_ethernet_addr(dev, info->ether);
+	status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
 	if (status < 0) {
 		usb_set_intfdata(info->data, NULL);
 		usb_driver_release_interface(driver_of(intf), info->data);
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 6fc4f82b0be..7ae82446b93 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -497,10 +497,10 @@ static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	int len;
 
 	/* format:
-	   b0: rx status
-	   b1: packet length (incl crc) low
-	   b2: packet length (incl crc) high
-	   b3..n-4: packet data
+	   b1: rx status
+	   b2: packet length (incl crc) low
+	   b3: packet length (incl crc) high
+	   b4..n-4: packet data
 	   bn-3..bn: ethernet crc
 	 */
 
@@ -533,8 +533,8 @@ static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	int len;
 
 	/* format:
-	   b0: packet length low
-	   b1: packet length high
+	   b1: packet length low
+	   b2: packet length high
 	   b3..n: packet data
 	*/
 
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index f84b78d94c4..f8c6d7ea726 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -482,7 +482,7 @@ static ssize_t hso_sysfs_show_porttype(struct device *dev,
 				       struct device_attribute *attr,
 				       char *buf)
 {
-	struct hso_device *hso_dev = dev->driver_data;
+	struct hso_device *hso_dev = dev_get_drvdata(dev);
 	char *port_name;
 
 	if (!hso_dev)
@@ -816,7 +816,7 @@ static int hso_net_start_xmit(struct sk_buff *skb, struct net_device *net)
 	}
 	dev_kfree_skb(skb);
 	/* we're done */
-	return result;
+	return NETDEV_TX_OK;
 }
 
 static void hso_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
@@ -899,15 +899,14 @@ static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
 					continue;
 				}
 				/* Allocate an sk_buff */
-				odev->skb_rx_buf = dev_alloc_skb(frame_len);
+				odev->skb_rx_buf = netdev_alloc_skb(odev->net,
+								    frame_len);
 				if (!odev->skb_rx_buf) {
 					/* We got no receive buffer. */
 					D1("could not allocate memory");
 					odev->rx_parse_state = WAIT_SYNC;
 					return;
 				}
-				/* Here's where it came from */
-				odev->skb_rx_buf->dev = odev->net;
 
 				/* Copy what we got so far. make room for iphdr
 				 * after tail. */
@@ -2313,7 +2312,7 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
 	serial->parent->dev = tty_register_device(tty_drv, minor,
 					&serial->parent->interface->dev);
 	dev = serial->parent->dev;
-	dev->driver_data = serial->parent;
+	dev_set_drvdata(dev, serial->parent);
 	i = device_create_file(dev, &dev_attr_hsotype);
 
 	/* fill in specific data for later use */
@@ -2481,10 +2480,10 @@ static int add_net_device(struct hso_device *hso_dev)
 	return 0;
 }
 
-static int hso_radio_toggle(void *data, enum rfkill_state state)
+static int hso_rfkill_set_block(void *data, bool blocked)
 {
 	struct hso_device *hso_dev = data;
-	int enabled = (state == RFKILL_STATE_ON);
+	int enabled = !blocked;
 	int rv;
 
 	mutex_lock(&hso_dev->mutex);
@@ -2498,6 +2497,10 @@ static int hso_radio_toggle(void *data, enum rfkill_state state)
 	return rv;
 }
 
+static const struct rfkill_ops hso_rfkill_ops = {
+	.set_block = hso_rfkill_set_block,
+};
+
 /* Creates and sets up everything for rfkill */
 static void hso_create_rfkill(struct hso_device *hso_dev,
 			     struct usb_interface *interface)
@@ -2506,29 +2509,25 @@ static void hso_create_rfkill(struct hso_device *hso_dev,
 	struct device *dev = &hso_net->net->dev;
 	char *rfkn;
 
-	hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev,
-				 RFKILL_TYPE_WWAN);
-	if (!hso_net->rfkill) {
-		dev_err(dev, "%s - Out of memory\n", __func__);
-		return;
-	}
 	rfkn = kzalloc(20, GFP_KERNEL);
-	if (!rfkn) {
-		rfkill_free(hso_net->rfkill);
-		hso_net->rfkill = NULL;
+	if (!rfkn)
 		dev_err(dev, "%s - Out of memory\n", __func__);
-		return;
-	}
+
 	snprintf(rfkn, 20, "hso-%d",
 		 interface->altsetting->desc.bInterfaceNumber);
-	hso_net->rfkill->name = rfkn;
-	hso_net->rfkill->state = RFKILL_STATE_ON;
-	hso_net->rfkill->data = hso_dev;
-	hso_net->rfkill->toggle_radio = hso_radio_toggle;
+
+	hso_net->rfkill = rfkill_alloc(rfkn,
+				       &interface_to_usbdev(interface)->dev,
+				       RFKILL_TYPE_WWAN,
+				       &hso_rfkill_ops, hso_dev);
+	if (!hso_net->rfkill) {
+		dev_err(dev, "%s - Out of memory\n", __func__);
+		kfree(rfkn);
+		return;
+	}
 	if (rfkill_register(hso_net->rfkill) < 0) {
+		rfkill_destroy(hso_net->rfkill);
 		kfree(rfkn);
-		hso_net->rfkill->name = NULL;
-		rfkill_free(hso_net->rfkill);
 		hso_net->rfkill = NULL;
 		dev_err(dev, "%s - Failed to register rfkill\n", __func__);
 		return;
@@ -3165,8 +3164,10 @@ static void hso_free_interface(struct usb_interface *interface)
 			hso_stop_net_device(network_table[i]);
 			cancel_work_sync(&network_table[i]->async_put_intf);
 			cancel_work_sync(&network_table[i]->async_get_intf);
-			if (rfk)
+			if (rfk) {
 				rfkill_unregister(rfk);
+				rfkill_destroy(rfk);
+			}
 			hso_free_net_device(network_table[i]);
 		}
 	}
diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c
new file mode 100644
index 00000000000..55cf7081de1
--- /dev/null
+++ b/drivers/net/usb/int51x1.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2009 Peter Holik
+ *
+ * Intellon usb PLC (Powerline Communications) usb net driver
+ *
+ * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf
+ *
+ * Based on the work of Jan 'RedBully' Seiffert
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or.
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+#define INT51X1_VENDOR_ID	0x09e1
+#define INT51X1_PRODUCT_ID	0x5121
+
+#define INT51X1_HEADER_SIZE	2	/* 2 byte header */
+
+#define PACKET_TYPE_PROMISCUOUS		(1 << 0)
+#define PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
+#define PACKET_TYPE_DIRECTED		(1 << 2)
+#define PACKET_TYPE_BROADCAST		(1 << 3)
+#define PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
+
+#define SET_ETHERNET_PACKET_FILTER	0x43
+
+static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int len;
+
+	if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) {
+		deverr(dev, "unexpected tiny rx frame");
+		return 0;
+	}
+
+	len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]);
+
+	skb_trim(skb, len);
+
+	return 1;
+}
+
+static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	int pack_len = skb->len;
+	int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	int need_tail = 0;
+	__le16 *len;
+
+	/* if packet and our header is smaler than 64 pad to 64 (+ ZLP) */
+	if ((pack_with_header_len) < dev->maxpacket)
+		need_tail = dev->maxpacket - pack_with_header_len + 1;
+	/*
+	 * usbnet would send a ZLP if packetlength mod urbsize == 0 for us,
+	 * but we need to know ourself, because this would add to the length
+	 * we send down to the device...
+	 */
+	else if (!(pack_with_header_len % dev->maxpacket))
+		need_tail = 1;
+
+	if (!skb_cloned(skb) &&
+			(headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) {
+		if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) {
+			skb->data = memmove(skb->head + INT51X1_HEADER_SIZE,
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb,
+				INT51X1_HEADER_SIZE,
+				need_tail,
+				flags);
+		dev_kfree_skb_any(skb);
+		if (!skb2)
+			return NULL;
+		skb = skb2;
+	}
+
+	pack_len += need_tail;
+	pack_len &= 0x07ff;
+
+	len = (__le16 *) __skb_push(skb, INT51X1_HEADER_SIZE);
+	*len = cpu_to_le16(pack_len);
+
+	if(need_tail)
+		memset(__skb_put(skb, need_tail), 0, need_tail);
+
+	return skb;
+}
+
+static void int51x1_async_cmd_callback(struct urb *urb)
+{
+	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		dev_warn(&urb->dev->dev, "async callback failed with %d\n", status);
+
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+static void int51x1_set_multicast(struct net_device *netdev)
+{
+	struct usb_ctrlrequest *req;
+	int status;
+	struct urb *urb;
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* do not expect to see traffic of other PLCs */
+		filter |= PACKET_TYPE_PROMISCUOUS;
+		devinfo(dev, "promiscuous mode enabled");
+	} else if (netdev->mc_count ||
+		  (netdev->flags & IFF_ALLMULTI)) {
+		filter |= PACKET_TYPE_ALL_MULTICAST;
+		devdbg(dev, "receive all multicast enabled");
+	} else {
+		/* ~PROMISCUOUS, ~MULTICAST */
+		devdbg(dev, "receive own packets only");
+	}
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		devwarn(dev, "Error allocating URB");
+		return;
+	}
+
+	req = kmalloc(sizeof(*req), GFP_ATOMIC);
+	if (!req) {
+		devwarn(dev, "Error allocating control msg");
+		goto out;
+	}
+
+	req->bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+	req->bRequest = SET_ETHERNET_PACKET_FILTER;
+	req->wValue = cpu_to_le16(filter);
+	req->wIndex = 0;
+	req->wLength = 0;
+
+	usb_fill_control_urb(urb, dev->udev, usb_sndctrlpipe(dev->udev, 0),
+		(void *)req, NULL, 0,
+		int51x1_async_cmd_callback,
+		(void *)req);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status < 0) {
+		devwarn(dev, "Error submitting control msg, sts=%d", status);
+		goto out1;
+	}
+	return;
+out1:
+	kfree(req);
+out:
+	usb_free_urb(urb);
+}
+
+static const struct net_device_ops int51x1_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_multicast_list	= int51x1_set_multicast,
+};
+
+static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = usbnet_get_ethernet_addr(dev, 3);
+
+	if (status)
+		return status;
+
+	dev->net->hard_header_len += INT51X1_HEADER_SIZE;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	dev->net->netdev_ops = &int51x1_netdev_ops;
+
+	return usbnet_get_endpoints(dev, intf);
+}
+
+static const struct driver_info int51x1_info = {
+	.description = "Intellon usb powerline adapter",
+	.bind        = int51x1_bind,
+	.rx_fixup    = int51x1_rx_fixup,
+	.tx_fixup    = int51x1_tx_fixup,
+	.in          = 1,
+	.out         = 2,
+	.flags       = FLAG_ETHER,
+};
+
+static const struct usb_device_id products[] = {
+	{
+	USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID),
+		.driver_info = (unsigned long) &int51x1_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver int51x1_driver = {
+	.name       = "int51x1",
+	.id_table   = products,
+	.probe      = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend    = usbnet_suspend,
+	.resume     = usbnet_resume,
+};
+
+static int __init int51x1_init(void)
+{
+	return usb_register(&int51x1_driver);
+}
+module_init(int51x1_init);
+
+static void __exit int51x1_exit(void)
+{
+	usb_deregister(&int51x1_driver);
+}
+module_exit(int51x1_exit);
+
+MODULE_AUTHOR("Peter Holik");
+MODULE_DESCRIPTION("Intellon usb powerline adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 3d0d0b0b37c..e0131478971 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -31,7 +31,6 @@
  ****************************************************************/
 
 /* TODO:
- * Fix in_interrupt() problem
  * Develop test procedures for USB net interfaces
  * Run test procedures
  * Fix bugs from previous two steps
@@ -606,14 +605,30 @@ static void kaweth_usb_receive(struct urb *urb)
 
 	struct sk_buff *skb;
 
-	if(unlikely(status == -ECONNRESET || status == -ESHUTDOWN))
-	/* we are killed - set a flag and wake the disconnect handler */
-	{
+	if (unlikely(status == -EPIPE)) {
+		kaweth->stats.rx_errors++;
 		kaweth->end = 1;
 		wake_up(&kaweth->term_wait);
+		dbg("Status was -EPIPE.");
 		return;
 	}
-
+	if (unlikely(status == -ECONNRESET || status == -ESHUTDOWN)) {
+		/* we are killed - set a flag and wake the disconnect handler */
+		kaweth->end = 1;
+		wake_up(&kaweth->term_wait);
+		dbg("Status was -ECONNRESET or -ESHUTDOWN.");
+		return;
+	}
+	if (unlikely(status == -EPROTO || status == -ETIME ||
+		     status == -EILSEQ)) {
+		kaweth->stats.rx_errors++;
+		dbg("Status was -EPROTO, -ETIME, or -EILSEQ.");
+		return;
+	}
+	if (unlikely(status == -EOVERFLOW)) {
+		kaweth->stats.rx_errors++;
+		dbg("Status was -EOVERFLOW.");
+	}
 	spin_lock(&kaweth->device_lock);
 	if (IS_BLOCKED(kaweth->status)) {
 		spin_unlock(&kaweth->device_lock);
@@ -883,13 +898,16 @@ static void kaweth_set_rx_mode(struct net_device *net)
  ****************************************************************/
 static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
 {
+	int result;
 	__u16 packet_filter_bitmap = kaweth->packet_filter_bitmap;
+
 	kaweth->packet_filter_bitmap = 0;
 	if (packet_filter_bitmap == 0)
 		return;
 
-	{
-	int result;
+	if (in_interrupt())
+		return;
+
 	result = kaweth_control(kaweth,
 				usb_sndctrlpipe(kaweth->dev, 0),
 				KAWETH_COMMAND_SET_PACKET_FILTER,
@@ -906,7 +924,6 @@ static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
 	else {
 		dbg("Set Rx mode to %d", packet_filter_bitmap);
 	}
-	}
 }
 
 /****************************************************************
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index f9fb454ffa8..fcc6fa0905d 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -221,7 +221,8 @@ static void ctrl_callback(struct urb *urb)
 	case -ENOENT:
 		break;
 	default:
-		dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status);
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status);
 	}
 	dev = urb->context;
 	clear_bit(RX_REG_SET, &dev->flags);
@@ -442,10 +443,12 @@ static void read_bulk_callback(struct urb *urb)
 	case -ENOENT:
 		return;	/* the urb is in unlink state */
 	case -ETIME:
-		dev_warn(&urb->dev->dev, "may be reset is needed?..\n");
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "may be reset is needed?..\n");
 		goto goon;
 	default:
-		dev_warn(&urb->dev->dev, "Rx status %d\n", status);
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "Rx status %d\n", status);
 		goto goon;
 	}
 
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 5a7283372b5..89a91f8c22d 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1134,7 +1134,7 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			if (skb->len == size) {
 				if (pdata->use_rx_csum)
 					smsc95xx_rx_csum_offload(skb);
-
+				skb_trim(skb, skb->len - 4); /* remove fcs */
 				skb->truesize = size + sizeof(struct sk_buff);
 
 				return 1;
@@ -1152,7 +1152,7 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 			if (pdata->use_rx_csum)
 				smsc95xx_rx_csum_offload(ax_skb);
-
+			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
 			ax_skb->truesize = size + sizeof(struct sk_buff);
 
 			usbnet_skb_return(dev, ax_skb);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f3a2fce6166..22c0585a031 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -37,6 +37,7 @@
 #include <linux/init.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/ctype.h>
 #include <linux/ethtool.h>
 #include <linux/workqueue.h>
 #include <linux/mii.h>
@@ -156,6 +157,36 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
 }
 EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
 
+static u8 nibble(unsigned char c)
+{
+	if (likely(isdigit(c)))
+		return c - '0';
+	c = toupper(c);
+	if (likely(isxdigit(c)))
+		return 10 + c - 'A';
+	return 0;
+}
+
+int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
+{
+	int 		tmp, i;
+	unsigned char	buf [13];
+
+	tmp = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
+	if (tmp != 12) {
+		dev_dbg(&dev->udev->dev,
+			"bad MAC string %d fetch, %d\n", iMACAddress, tmp);
+		if (tmp >= 0)
+			tmp = -EINVAL;
+		return tmp;
+	}
+	for (i = tmp = 0; i < 6; i++, tmp += 2)
+		dev->net->dev_addr [i] =
+			(nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
+
 static void intr_complete (struct urb *urb);
 
 static int init_status (struct usbnet *dev, struct usb_interface *intf)
@@ -398,7 +429,7 @@ static void rx_complete (struct urb *urb)
 
 	/* stalls need manual reset. this is rare ... except that
 	 * when going through USB 2.0 TTs, unplug appears this way.
-	 * we avoid the highspeed version of the ETIMEOUT/EILSEQ
+	 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
 	 * storm, recovering as needed.
 	 */
 	case -EPIPE:
@@ -1185,12 +1216,6 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 #endif
 
 	net->netdev_ops = &usbnet_netdev_ops;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	net->hard_start_xmit = usbnet_start_xmit;
-	net->open = usbnet_open;
-	net->stop = usbnet_stop;
-	net->tx_timeout = usbnet_tx_timeout;
-#endif
 	net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
 	net->ethtool_ops = &usbnet_ethtool_ops;
 
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 8e56fcf0a0e..87197dd9c78 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -176,8 +176,6 @@ static int veth_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (dev->features & NETIF_F_NO_CSUM)
 		skb->ip_summed = rcv_priv->ip_summed;
 
-	dst_release(skb->dst);
-	skb->dst = NULL;
 	skb->mark = 0;
 	secpath_reset(skb);
 	nf_reset(skb);
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 45daba726b6..d3489a3c4c0 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -388,7 +388,6 @@ struct rhine_private {
 	long pioaddr;
 	struct net_device *dev;
 	struct napi_struct napi;
-	struct net_device_stats stats;
 	spinlock_t lock;
 
 	/* Frequently used values: keep some adjacent for cache effect. */
@@ -1209,7 +1208,7 @@ static void rhine_tx_timeout(struct net_device *dev)
 	enable_irq(rp->pdev->irq);
 
 	dev->trans_start = jiffies;
-	rp->stats.tx_errors++;
+	dev->stats.tx_errors++;
 	netif_wake_queue(dev);
 }
 
@@ -1237,7 +1236,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
 			/* packet too long, drop it */
 			dev_kfree_skb(skb);
 			rp->tx_skbuff[entry] = NULL;
-			rp->stats.tx_dropped++;
+			dev->stats.tx_dropped++;
 			return 0;
 		}
 
@@ -1378,29 +1377,33 @@ static void rhine_tx(struct net_device *dev)
 				printk(KERN_DEBUG "%s: Transmit error, "
 				       "Tx status %8.8x.\n",
 				       dev->name, txstatus);
-			rp->stats.tx_errors++;
-			if (txstatus & 0x0400) rp->stats.tx_carrier_errors++;
-			if (txstatus & 0x0200) rp->stats.tx_window_errors++;
-			if (txstatus & 0x0100) rp->stats.tx_aborted_errors++;
-			if (txstatus & 0x0080) rp->stats.tx_heartbeat_errors++;
+			dev->stats.tx_errors++;
+			if (txstatus & 0x0400)
+				dev->stats.tx_carrier_errors++;
+			if (txstatus & 0x0200)
+				dev->stats.tx_window_errors++;
+			if (txstatus & 0x0100)
+				dev->stats.tx_aborted_errors++;
+			if (txstatus & 0x0080)
+				dev->stats.tx_heartbeat_errors++;
 			if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
 			    (txstatus & 0x0800) || (txstatus & 0x1000)) {
-				rp->stats.tx_fifo_errors++;
+				dev->stats.tx_fifo_errors++;
 				rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
 				break; /* Keep the skb - we try again */
 			}
 			/* Transmitter restarted in 'abnormal' handler. */
 		} else {
 			if (rp->quirks & rqRhineI)
-				rp->stats.collisions += (txstatus >> 3) & 0x0F;
+				dev->stats.collisions += (txstatus >> 3) & 0x0F;
 			else
-				rp->stats.collisions += txstatus & 0x0F;
+				dev->stats.collisions += txstatus & 0x0F;
 			if (debug > 6)
 				printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n",
 				       (txstatus >> 3) & 0xF,
 				       txstatus & 0xF);
-			rp->stats.tx_bytes += rp->tx_skbuff[entry]->len;
-			rp->stats.tx_packets++;
+			dev->stats.tx_bytes += rp->tx_skbuff[entry]->len;
+			dev->stats.tx_packets++;
 		}
 		/* Free the original skb. */
 		if (rp->tx_skbuff_dma[entry]) {
@@ -1455,21 +1458,24 @@ static int rhine_rx(struct net_device *dev, int limit)
 				printk(KERN_WARNING "%s: Oversized Ethernet "
 				       "frame %p vs %p.\n", dev->name,
 				       rp->rx_head_desc, &rp->rx_ring[entry]);
-				rp->stats.rx_length_errors++;
+				dev->stats.rx_length_errors++;
 			} else if (desc_status & RxErr) {
 				/* There was a error. */
 				if (debug > 2)
 					printk(KERN_DEBUG "rhine_rx() Rx "
 					       "error was %8.8x.\n",
 					       desc_status);
-				rp->stats.rx_errors++;
-				if (desc_status & 0x0030) rp->stats.rx_length_errors++;
-				if (desc_status & 0x0048) rp->stats.rx_fifo_errors++;
-				if (desc_status & 0x0004) rp->stats.rx_frame_errors++;
+				dev->stats.rx_errors++;
+				if (desc_status & 0x0030)
+					dev->stats.rx_length_errors++;
+				if (desc_status & 0x0048)
+					dev->stats.rx_fifo_errors++;
+				if (desc_status & 0x0004)
+					dev->stats.rx_frame_errors++;
 				if (desc_status & 0x0002) {
 					/* this can also be updated outside the interrupt handler */
 					spin_lock(&rp->lock);
-					rp->stats.rx_crc_errors++;
+					dev->stats.rx_crc_errors++;
 					spin_unlock(&rp->lock);
 				}
 			}
@@ -1513,8 +1519,8 @@ static int rhine_rx(struct net_device *dev, int limit)
 			}
 			skb->protocol = eth_type_trans(skb, dev);
 			netif_receive_skb(skb);
-			rp->stats.rx_bytes += pkt_len;
-			rp->stats.rx_packets++;
+			dev->stats.rx_bytes += pkt_len;
+			dev->stats.rx_packets++;
 		}
 		entry = (++rp->cur_rx) % RX_RING_SIZE;
 		rp->rx_head_desc = &rp->rx_ring[entry];
@@ -1599,8 +1605,8 @@ static void rhine_error(struct net_device *dev, int intr_status)
 	if (intr_status & IntrLinkChange)
 		rhine_check_media(dev, 0);
 	if (intr_status & IntrStatsMax) {
-		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
-		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+		dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+		dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
 		clear_tally_counters(ioaddr);
 	}
 	if (intr_status & IntrTxAborted) {
@@ -1654,12 +1660,12 @@ static struct net_device_stats *rhine_get_stats(struct net_device *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rp->lock, flags);
-	rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
-	rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+	dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+	dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
 	clear_tally_counters(ioaddr);
 	spin_unlock_irqrestore(&rp->lock, flags);
 
-	return &rp->stats;
+	return &dev->stats;
 }
 
 static void rhine_set_rx_mode(struct net_device *dev)
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 754a4b182c1..e2a7725e567 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1385,7 +1385,7 @@ static void velocity_free_td_ring(struct velocity_info *vptr)
 
 static int velocity_rx_srv(struct velocity_info *vptr, int status)
 {
-	struct net_device_stats *stats = &vptr->stats;
+	struct net_device_stats *stats = &vptr->dev->stats;
 	int rd_curr = vptr->rx.curr;
 	int works = 0;
 
@@ -1519,7 +1519,7 @@ static inline void velocity_iph_realign(struct velocity_info *vptr,
 static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 {
 	void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
-	struct net_device_stats *stats = &vptr->stats;
+	struct net_device_stats *stats = &vptr->dev->stats;
 	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
 	struct rx_desc *rd = &(vptr->rx.ring[idx]);
 	int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
@@ -1532,7 +1532,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 	}
 
 	if (rd->rdesc0.RSR & RSR_MAR)
-		vptr->stats.multicast++;
+		stats->multicast++;
 
 	skb = rd_info->skb;
 
@@ -1634,7 +1634,7 @@ static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
 	int idx;
 	int works = 0;
 	struct velocity_td_info *tdinfo;
-	struct net_device_stats *stats = &vptr->stats;
+	struct net_device_stats *stats = &vptr->dev->stats;
 
 	for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
 		for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
@@ -2324,22 +2324,22 @@ static struct net_device_stats *velocity_get_stats(struct net_device *dev)
 
 	/* If the hardware is down, don't touch MII */
 	if(!netif_running(dev))
-		return &vptr->stats;
+		return &dev->stats;
 
 	spin_lock_irq(&vptr->lock);
 	velocity_update_hw_mibs(vptr);
 	spin_unlock_irq(&vptr->lock);
 
-	vptr->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
-	vptr->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
-	vptr->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
+	dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
+	dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
+	dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
 
 //  unsigned long   rx_dropped;     /* no space in linux buffers    */
-	vptr->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
+	dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
 	/* detailed rx_errors: */
 //  unsigned long   rx_length_errors;
 //  unsigned long   rx_over_errors;     /* receiver ring buff overflow  */
-	vptr->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
+	dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
 //  unsigned long   rx_frame_errors;    /* recv'd frame alignment error */
 //  unsigned long   rx_fifo_errors;     /* recv'r fifo overrun      */
 //  unsigned long   rx_missed_errors;   /* receiver missed packet   */
@@ -2347,7 +2347,7 @@ static struct net_device_stats *velocity_get_stats(struct net_device *dev)
 	/* detailed tx_errors */
 //  unsigned long   tx_fifo_errors;
 
-	return &vptr->stats;
+	return &dev->stats;
 }
 
 
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index ea43e1832af..4cd3f6c9737 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1503,7 +1503,6 @@ struct velocity_info {
 
 	struct pci_dev *pdev;
 	struct net_device *dev;
-	struct net_device_stats stats;
 
 	struct vlan_group    *vlgrp;
 	u8 ip_addr[4];
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 7fa620ddeb2..52198f6797a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -283,10 +283,11 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi)
 	for (;;) {
 		struct virtio_net_hdr *hdr;
 
-		skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN);
+		skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
 		if (unlikely(!skb))
 			break;
 
+		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, MAX_PACKET_LEN);
 
 		hdr = skb_vnet_hdr(skb);
@@ -470,7 +471,7 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 	}
 
 	if (skb_is_gso(skb)) {
-		hdr->hdr_len = skb_transport_header(skb) - skb->data;
+		hdr->hdr_len = skb_headlen(skb);
 		hdr->gso_size = skb_shinfo(skb)->gso_size;
 		if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
 			hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
@@ -622,12 +623,9 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
 	unsigned int tmp;
 	int i;
 
-	if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
-		BUG();  /* Caller should know better */
-		return false;
-	}
-
-	BUG_ON(out + in > VIRTNET_SEND_COMMAND_SG_MAX);
+	/* Caller should know better */
+	BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ||
+		(out + in > VIRTNET_SEND_COMMAND_SG_MAX));
 
 	out++; /* Add header */
 	in++; /* Add return status */
@@ -642,8 +640,7 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
 		sg_set_buf(&sg[i + 1], sg_virt(s), s->length);
 	sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
 
-	if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0)
-		BUG();
+	BUG_ON(vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi));
 
 	vi->cvq->vq_ops->kick(vi->cvq);
 
@@ -684,6 +681,7 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 	u8 promisc, allmulti;
 	struct virtio_net_ctrl_mac *mac_data;
 	struct dev_addr_list *addr;
+	struct netdev_hw_addr *ha;
 	void *buf;
 	int i;
 
@@ -722,9 +720,9 @@ static void virtnet_set_rx_mode(struct net_device *dev)
 
 	/* Store the unicast list and count in the front of the buffer */
 	mac_data->entries = dev->uc_count;
-	addr = dev->uc_list;
-	for (i = 0; i < dev->uc_count; i++, addr = addr->next)
-		memcpy(&mac_data->macs[i][0], addr->da_addr, ETH_ALEN);
+	i = 0;
+	list_for_each_entry(ha, &dev->uc_list, list)
+		memcpy(&mac_data->macs[i++][0], ha->addr, ETH_ALEN);
 
 	sg_set_buf(&sg[0], mac_data,
 		   sizeof(mac_data->entries) + (dev->uc_count * ETH_ALEN));
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index 6b41c884a33..26cde573af4 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -1884,17 +1884,13 @@ void __vxge_hw_mempool_destroy(struct vxge_hw_mempool *mempool)
 				mempool->memblock_size, dma_object);
 	}
 
-	if (mempool->items_arr)
-		vfree(mempool->items_arr);
+	vfree(mempool->items_arr);
 
-	if (mempool->memblocks_dma_arr)
-		vfree(mempool->memblocks_dma_arr);
+	vfree(mempool->memblocks_dma_arr);
 
-	if (mempool->memblocks_priv_arr)
-		vfree(mempool->memblocks_priv_arr);
+	vfree(mempool->memblocks_priv_arr);
 
-	if (mempool->memblocks_arr)
-		vfree(mempool->memblocks_arr);
+	vfree(mempool->memblocks_arr);
 
 	vfree(mempool);
 }
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index b7f08f3e524..6c838b3e063 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -677,7 +677,7 @@ vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr,
 	return VXGE_HW_OK;
 }
 
-/* select a vpath to trasmit the packet */
+/* select a vpath to transmit the packet */
 static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb,
 	int *do_lock)
 {
@@ -992,7 +992,9 @@ vxge_xmit(struct sk_buff *skb, struct net_device *dev)
 					VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN);
 
 	vxge_hw_fifo_txdl_post(fifo_hw, dtr);
-	dev->trans_start = jiffies;
+#ifdef NETIF_F_LLTX
+	dev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
+#endif
 	spin_unlock_irqrestore(&fifo->tx_lock, flags);
 
 	VXGE_COMPLETE_VPATH_TX(fifo);
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index c2eeac4125f..370f55cbbad 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -1923,7 +1923,7 @@ enum vxge_hw_status __vxge_hw_vpath_alarm_process(
 	if (vpath == NULL) {
 		alarm_event = VXGE_HW_SET_LEVEL(VXGE_HW_EVENT_UNKNOWN,
 			alarm_event);
-		goto out;
+		goto out2;
 	}
 
 	hldev = vpath->hldev;
@@ -2161,7 +2161,7 @@ enum vxge_hw_status __vxge_hw_vpath_alarm_process(
 	}
 out:
 	hldev->stats.sw_dev_err_stats.vpath_alarms++;
-
+out2:
 	if ((alarm_event == VXGE_HW_EVENT_ALARM_CLEARED) ||
 		(alarm_event == VXGE_HW_EVENT_UNKNOWN))
 		return VXGE_HW_OK;
diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c
index 35dea3bea95..f525f9fe74d 100644
--- a/drivers/net/wan/cycx_x25.c
+++ b/drivers/net/wan/cycx_x25.c
@@ -615,7 +615,7 @@ static int cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
 		case WAN_DISCONNECTED:
 			if (cycx_x25_chan_connect(dev)) {
 				netif_stop_queue(dev);
-				return -EBUSY;
+				return NETDEV_TX_BUSY;
 			}
 			/* fall thru */
 		case WAN_CONNECTED:
@@ -624,7 +624,7 @@ static int cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
 			netif_stop_queue(dev);
 
 			if (cycx_x25_chan_send(dev, skb))
-				return -EBUSY;
+				return NETDEV_TX_BUSY;
 
 			break;
 		default:
@@ -656,7 +656,7 @@ static int cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
 		if (cycx_x25_chan_send(dev, skb)) {
 			/* prepare for future retransmissions */
 			skb_push(skb, 1);
-			return -EBUSY;
+			return NETDEV_TX_BUSY;
 		}
 	}
 
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index e8d155c3e59..2fa275a58f9 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -205,15 +205,15 @@ static int dlci_transmit(struct sk_buff *skb, struct net_device *dev)
 	{
 		case DLCI_RET_OK:
 			dev->stats.tx_packets++;
-			ret = 0;
+			ret = NETDEV_TX_OK;
 			break;
 			case DLCI_RET_ERR:
 			dev->stats.tx_errors++;
-			ret = 0;
+			ret = NETDEV_TX_OK;
 			break;
 			case DLCI_RET_DROP:
 			dev->stats.tx_dropped++;
-			ret = 1;
+			ret = NETDEV_TX_BUSY;
 			break;
 	}
 	/* Alan Cox recommends always returning 0, and always freeing the packet */
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 80053010109..bfa0161a02d 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1054,6 +1054,7 @@ static void pvc_setup(struct net_device *dev)
 	dev->flags = IFF_POINTOPOINT;
 	dev->hard_header_len = 10;
 	dev->addr_len = 2;
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 }
 
 static const struct net_device_ops pvc_ops = {
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 765a7f5d6aa..bb719b6114c 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -579,7 +579,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
 	debug_desc(phys, desc);
 	BUG_ON(phys & 0x1F);
 	qmgr_put_entry(queue, phys);
-	BUG_ON(qmgr_stat_overflow(queue));
+	/* Don't check for queue overflow here, we've allocated sufficient
+	   length and queues >= 32 don't support this check anyway. */
 }
 
 
@@ -731,8 +732,8 @@ static int hss_hdlc_poll(struct napi_struct *napi, int budget)
 		dma_unmap_single(&dev->dev, desc->data,
 				 RX_SIZE, DMA_FROM_DEVICE);
 #else
-		dma_sync_single(&dev->dev, desc->data,
-				RX_SIZE, DMA_FROM_DEVICE);
+		dma_sync_single_for_cpu(&dev->dev, desc->data,
+					RX_SIZE, DMA_FROM_DEVICE);
 		memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
 			      ALIGN(desc->pkt_len, 4) / 4);
 #endif
@@ -789,10 +790,10 @@ static void hss_hdlc_txdone_irq(void *pdev)
 		free_buffer_irq(port->tx_buff_tab[n_desc]);
 		port->tx_buff_tab[n_desc] = NULL;
 
-		start = qmgr_stat_empty(port->plat->txreadyq);
+		start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
 		queue_put_desc(port->plat->txreadyq,
 			       tx_desc_phys(port, n_desc), desc);
-		if (start) {
+		if (start) { /* TX-ready queue was empty */
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
 			       " ready\n", dev->name);
@@ -867,13 +868,13 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
 	queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
 	dev->trans_start = jiffies;
 
-	if (qmgr_stat_empty(txreadyq)) {
+	if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
 #if DEBUG_TX
 		printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
 #endif
 		netif_stop_queue(dev);
 		/* we could miss TX ready interrupt */
-		if (!qmgr_stat_empty(txreadyq)) {
+		if (!qmgr_stat_below_low_watermark(txreadyq)) {
 #if DEBUG_TX
 			printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
 			       dev->name);
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index c23fde0c034..79dabc557bd 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -225,6 +225,7 @@ static char rcsid[] =
 #include <linux/skbuff.h>
 #include <linux/if_arp.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/spinlock.h>
 #include <linux/if.h>
 #include <net/arp.h>
@@ -3246,6 +3247,16 @@ static inline void show_version(void)
 		rcsvers, rcsdate, __DATE__, __TIME__);
 }				/* show_version */
 
+static const struct net_device_ops cpc_netdev_ops = {
+	.ndo_open		= cpc_open,
+	.ndo_stop		= cpc_close,
+	.ndo_tx_timeout		= cpc_tx_timeout,
+	.ndo_set_mac_address	= NULL,
+	.ndo_change_mtu		= cpc_change_mtu,
+	.ndo_do_ioctl		= cpc_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static void cpc_init_card(pc300_t * card)
 {
 	int i, devcount = 0;
@@ -3357,18 +3368,11 @@ static void cpc_init_card(pc300_t * card)
 		dev->mem_start = card->hw.ramphys;
 		dev->mem_end = card->hw.ramphys + card->hw.ramsize - 1;
 		dev->irq = card->hw.irq;
-		dev->init = NULL;
 		dev->tx_queue_len = PC300_TX_QUEUE_LEN;
 		dev->mtu = PC300_DEF_MTU;
 
-		dev->open = cpc_open;
-		dev->stop = cpc_close;
-		dev->tx_timeout = cpc_tx_timeout;
+		dev->netdev_ops = &cpc_netdev_ops;
 		dev->watchdog_timeo = PC300_TX_TIMEOUT;
-		dev->set_multicast_list = NULL;
-		dev->set_mac_address = NULL;
-		dev->change_mtu = cpc_change_mtu;
-		dev->do_ioctl = cpc_ioctl;
 
 		if (register_hdlc_device(dev) == 0) {
 			printk("%s: Cyclades-PC300/", dev->name);
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index f4211fe0f44..3fb9dbc88a1 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -469,7 +469,7 @@ sbni_start_xmit( struct sk_buff  *skb,  struct net_device  *dev )
 		}
 	}
 
-	return  1;
+	return NETDEV_TX_BUSY;
 }
 
 #else	/* CONFIG_SBNI_MULTILINE */
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 8130b79a8a9..e4ad7b6b52e 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -283,7 +283,7 @@ static int wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 		netif_stop_queue(dev);
 		spin_unlock_irq(&port->lock);
-		return 1;       /* request packet to be queued */
+		return NETDEV_TX_BUSY;       /* request packet to be queued */
 	}
 
 #ifdef DEBUG_PKT
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index b3cadb626fe..07308686dbc 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -292,8 +292,6 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m,
 
 	d_fnstart(3, dev, "(i2400m %p ss %p [%u])\n", i2400m, ss, i2400m_state);
 
-	if (unlikely(i2400m->ready == 0))	/* act if up */
-		goto out;
 	if (i2400m->state != i2400m_state) {
 		i2400m->state = i2400m_state;
 		wake_up_all(&i2400m->state_wq);
@@ -341,7 +339,6 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m,
 		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
 		break;
 	};
-out:
 	d_fnend(3, dev, "(i2400m %p ss %p [%u]) = void\n",
 		i2400m, ss, i2400m_state);
 }
@@ -372,8 +369,6 @@ void i2400m_report_tlv_media_status(struct i2400m *i2400m,
 
 	d_fnstart(3, dev, "(i2400m %p ms %p [%u])\n", i2400m, ms, status);
 
-	if (unlikely(i2400m->ready == 0))	/* act if up */
-		goto out;
 	switch (status) {
 	case I2400M_MEDIA_STATUS_LINK_UP:
 		netif_carrier_on(net_dev);
@@ -393,14 +388,59 @@ void i2400m_report_tlv_media_status(struct i2400m *i2400m,
 		dev_err(dev, "HW BUG? unknown media status %u\n",
 			status);
 	};
-out:
 	d_fnend(3, dev, "(i2400m %p ms %p [%u]) = void\n",
 		i2400m, ms, status);
 }
 
 
 /*
- * Parse a 'state report' and extract carrier on/off information
+ * Process a TLV from a 'state report'
+ *
+ * @i2400m: device descriptor
+ * @tlv: pointer to the TLV header; it has been already validated for
+ *     consistent size.
+ * @tag: for error messages
+ *
+ * Act on the TLVs from a 'state report'.
+ */
+static
+void i2400m_report_state_parse_tlv(struct i2400m *i2400m,
+				   const struct i2400m_tlv_hdr *tlv,
+				   const char *tag)
+{
+	struct device *dev = i2400m_dev(i2400m);
+	const struct i2400m_tlv_media_status *ms;
+	const struct i2400m_tlv_system_state *ss;
+	const struct i2400m_tlv_rf_switches_status *rfss;
+
+	if (0 == i2400m_tlv_match(tlv, I2400M_TLV_SYSTEM_STATE, sizeof(*ss))) {
+		ss = container_of(tlv, typeof(*ss), hdr);
+		d_printf(2, dev, "%s: system state TLV "
+			 "found (0x%04x), state 0x%08x\n",
+			 tag, I2400M_TLV_SYSTEM_STATE,
+			 le32_to_cpu(ss->state));
+		i2400m_report_tlv_system_state(i2400m, ss);
+	}
+	if (0 == i2400m_tlv_match(tlv, I2400M_TLV_RF_STATUS, sizeof(*rfss))) {
+		rfss = container_of(tlv, typeof(*rfss), hdr);
+		d_printf(2, dev, "%s: RF status TLV "
+			 "found (0x%04x), sw 0x%02x hw 0x%02x\n",
+			 tag, I2400M_TLV_RF_STATUS,
+			 le32_to_cpu(rfss->sw_rf_switch),
+			 le32_to_cpu(rfss->hw_rf_switch));
+		i2400m_report_tlv_rf_switches_status(i2400m, rfss);
+	}
+	if (0 == i2400m_tlv_match(tlv, I2400M_TLV_MEDIA_STATUS, sizeof(*ms))) {
+		ms = container_of(tlv, typeof(*ms), hdr);
+		d_printf(2, dev, "%s: Media Status TLV: %u\n",
+			 tag, le32_to_cpu(ms->media_status));
+		i2400m_report_tlv_media_status(i2400m, ms);
+	}
+}
+
+
+/*
+ * Parse a 'state report' and extract information
  *
  * @i2400m: device descriptor
  * @l3l4_hdr: pointer to message; it has been already validated for
@@ -409,13 +449,7 @@ out:
  *        declaration is assumed to be congruent with @size (as in
  *        sizeof(*l3l4_hdr) + l3l4_hdr->length == size)
  *
- * Extract from the report state the system state TLV and infer from
- * there if we have a carrier or not. Update our local state and tell
- * netdev.
- *
- * When setting the carrier, it's fine to set OFF twice (for example),
- * as netif_carrier_off() will not generate two OFF events (just on
- * the transitions).
+ * Walk over the TLVs in a report state and act on them.
  */
 static
 void i2400m_report_state_hook(struct i2400m *i2400m,
@@ -424,9 +458,6 @@ void i2400m_report_state_hook(struct i2400m *i2400m,
 {
 	struct device *dev = i2400m_dev(i2400m);
 	const struct i2400m_tlv_hdr *tlv;
-	const struct i2400m_tlv_system_state *ss;
-	const struct i2400m_tlv_rf_switches_status *rfss;
-	const struct i2400m_tlv_media_status *ms;
 	size_t tlv_size = le16_to_cpu(l3l4_hdr->length);
 
 	d_fnstart(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s)\n",
@@ -434,34 +465,8 @@ void i2400m_report_state_hook(struct i2400m *i2400m,
 	tlv = NULL;
 
 	while ((tlv = i2400m_tlv_buffer_walk(i2400m, &l3l4_hdr->pl,
-					     tlv_size, tlv))) {
-		if (0 == i2400m_tlv_match(tlv, I2400M_TLV_SYSTEM_STATE,
-					  sizeof(*ss))) {
-			ss = container_of(tlv, typeof(*ss), hdr);
-			d_printf(2, dev, "%s: system state TLV "
-				 "found (0x%04x), state 0x%08x\n",
-				 tag, I2400M_TLV_SYSTEM_STATE,
-				 le32_to_cpu(ss->state));
-			i2400m_report_tlv_system_state(i2400m, ss);
-		}
-		if (0 == i2400m_tlv_match(tlv, I2400M_TLV_RF_STATUS,
-					  sizeof(*rfss))) {
-			rfss = container_of(tlv, typeof(*rfss), hdr);
-			d_printf(2, dev, "%s: RF status TLV "
-				 "found (0x%04x), sw 0x%02x hw 0x%02x\n",
-				 tag, I2400M_TLV_RF_STATUS,
-				 le32_to_cpu(rfss->sw_rf_switch),
-				 le32_to_cpu(rfss->hw_rf_switch));
-			i2400m_report_tlv_rf_switches_status(i2400m, rfss);
-		}
-		if (0 == i2400m_tlv_match(tlv, I2400M_TLV_MEDIA_STATUS,
-					  sizeof(*ms))) {
-			ms = container_of(tlv, typeof(*ms), hdr);
-			d_printf(2, dev, "%s: Media Status TLV: %u\n",
-				 tag, le32_to_cpu(ms->media_status));
-			i2400m_report_tlv_media_status(i2400m, ms);
-		}
-	}
+					     tlv_size, tlv)))
+		i2400m_report_state_parse_tlv(i2400m, tlv, tag);
 	d_fnend(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s) = void\n",
 		i2400m, l3l4_hdr, size, tag);
 }
@@ -500,8 +505,15 @@ void i2400m_report_hook(struct i2400m *i2400m,
 	 * it. */
 	case I2400M_MT_REPORT_POWERSAVE_READY:	/* zzzzz */
 		if (l3l4_hdr->status == cpu_to_le16(I2400M_MS_DONE_OK)) {
-			d_printf(1, dev, "ready for powersave, requesting\n");
-			i2400m_cmd_enter_powersave(i2400m);
+			if (i2400m_power_save_disabled)
+				d_printf(1, dev, "ready for powersave, "
+					 "not requesting (disabled by module "
+					 "parameter)\n");
+			else {
+				d_printf(1, dev, "ready for powersave, "
+					 "requesting\n");
+				i2400m_cmd_enter_powersave(i2400m);
+			}
 		}
 		break;
 	};
@@ -683,8 +695,9 @@ struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m,
 	d_fnstart(3, dev, "(i2400m %p buf %p len %zu)\n",
 		  i2400m, buf, buf_len);
 
+	rmb();		/* Make sure we see what i2400m_dev_reset_handle() */
 	if (i2400m->boot_mode)
-		return ERR_PTR(-ENODEV);
+		return ERR_PTR(-EL3RST);
 
 	msg_l3l4_hdr = buf;
 	/* Check msg & payload consistency */
@@ -721,6 +734,8 @@ struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m,
 		ack_timeout = HZ;
 	};
 
+	if (unlikely(i2400m->trace_msg_from_user))
+		wimax_msg(&i2400m->wimax_dev, "echo", buf, buf_len, GFP_KERNEL);
 	/* The RX path in rx.c will put any response for this message
 	 * in i2400m->ack_skb and wake us up. If we cancel the wait,
 	 * we need to change the value of i2400m->ack_skb to something
@@ -755,6 +770,9 @@ struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m,
 	ack_l3l4_hdr = wimax_msg_data_len(ack_skb, &ack_len);
 
 	/* Check the ack and deliver it if it is ok */
+	if (unlikely(i2400m->trace_msg_from_user))
+		wimax_msg(&i2400m->wimax_dev, "echo",
+			  ack_l3l4_hdr, ack_len, GFP_KERNEL);
 	result = i2400m_msg_size_check(i2400m, ack_l3l4_hdr, ack_len);
 	if (result < 0) {
 		dev_err(dev, "HW BUG? reply to message 0x%04x: %d\n",
@@ -1379,16 +1397,16 @@ error:
  *
  * @i2400m: device descriptor
  *
- * Gracefully stops the device, moving it to the lowest power
- * consumption state possible.
+ * Release resources acquired during the running of the device; in
+ * theory, should also tell the device to go to sleep, switch off the
+ * radio, all that, but at this point, in most cases (driver
+ * disconnection, reset handling) we can't even talk to the device.
  */
 void i2400m_dev_shutdown(struct i2400m *i2400m)
 {
-	int result = -ENODEV;
 	struct device *dev = i2400m_dev(i2400m);
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
-	result = i2400m->bus_reset(i2400m, I2400M_RT_WARM);
-	d_fnend(3, dev, "(i2400m %p) = void [%d]\n", i2400m, result);
+	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 	return;
 }
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 07a54bad237..304f0443ca4 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -62,6 +62,7 @@
  *   unregister_netdev()
  */
 #include "i2400m.h"
+#include <linux/etherdevice.h>
 #include <linux/wimax/i2400m.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -81,6 +82,14 @@ module_param_named(rx_reorder_disabled, i2400m_rx_reorder_disabled, int, 0644);
 MODULE_PARM_DESC(rx_reorder_disabled,
 		 "If true, RX reordering will be disabled.");
 
+int i2400m_power_save_disabled;	/* 0 (power saving enabled) by default */
+module_param_named(power_save_disabled, i2400m_power_save_disabled, int, 0644);
+MODULE_PARM_DESC(power_save_disabled,
+		 "If true, the driver will not tell the device to enter "
+		 "power saving mode when it reports it is ready for it. "
+		 "False by default (so the device is told to do power "
+		 "saving).");
+
 /**
  * i2400m_queue_work - schedule work on a i2400m's queue
  *
@@ -171,7 +180,6 @@ int i2400m_schedule_work(struct i2400m *i2400m,
 	int result;
 	struct i2400m_work *iw;
 
-	BUG_ON(i2400m->work_queue == NULL);
 	result = -ENOMEM;
 	iw = kzalloc(sizeof(*iw), gfp_flags);
 	if (iw == NULL)
@@ -234,9 +242,6 @@ int i2400m_op_msg_from_user(struct wimax_dev *wimax_dev,
 	result = PTR_ERR(ack_skb);
 	if (IS_ERR(ack_skb))
 		goto error_msg_to_dev;
-	if (unlikely(i2400m->trace_msg_from_user))
-		wimax_msg(&i2400m->wimax_dev, "trace",
-			  msg_buf, msg_len, GFP_KERNEL);
 	result = wimax_msg_send(&i2400m->wimax_dev, ack_skb);
 error_msg_to_dev:
 	d_fnend(4, dev, "(wimax_dev %p [i2400m %p] msg_buf %p msg_len %zu "
@@ -379,6 +384,11 @@ error:
  * Uploads firmware and brings up all the resources needed to be able
  * to communicate with the device.
  *
+ * The workqueue has to be setup early, at least before RX handling
+ * (it's only real user for now) so it can process reports as they
+ * arrive. We also want to destroy it if we retry, to make sure it is
+ * flushed...easier like this.
+ *
  * TX needs to be setup before the bus-specific code (otherwise on
  * shutdown, the bus-tx code could try to access it).
  */
@@ -389,7 +399,7 @@ int __i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri flags)
 	struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
 	struct net_device *net_dev = wimax_dev->net_dev;
 	struct device *dev = i2400m_dev(i2400m);
-	int times = 3;
+	int times = i2400m->bus_bm_retries;
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
 retry:
@@ -404,15 +414,15 @@ retry:
 	result = i2400m_rx_setup(i2400m);
 	if (result < 0)
 		goto error_rx_setup;
-	result = i2400m->bus_dev_start(i2400m);
-	if (result < 0)
-		goto error_bus_dev_start;
 	i2400m->work_queue = create_singlethread_workqueue(wimax_dev->name);
 	if (i2400m->work_queue == NULL) {
 		result = -ENOMEM;
 		dev_err(dev, "cannot create workqueue\n");
 		goto error_create_workqueue;
 	}
+	result = i2400m->bus_dev_start(i2400m);
+	if (result < 0)
+		goto error_bus_dev_start;
 	result = i2400m_firmware_check(i2400m);	/* fw versions ok? */
 	if (result < 0)
 		goto error_fw_check;
@@ -434,17 +444,17 @@ retry:
 error_dev_initialize:
 error_check_mac_addr:
 error_fw_check:
-	destroy_workqueue(i2400m->work_queue);
-error_create_workqueue:
 	i2400m->bus_dev_stop(i2400m);
 error_bus_dev_start:
+	destroy_workqueue(i2400m->work_queue);
+error_create_workqueue:
 	i2400m_rx_release(i2400m);
 error_rx_setup:
 	i2400m_tx_release(i2400m);
 error_tx_setup:
 error_bootstrap:
-	if (result == -ERESTARTSYS && times-- > 0) {
-		flags = I2400M_BRI_SOFT;
+	if (result == -EL3RST && times-- > 0) {
+		flags = I2400M_BRI_SOFT|I2400M_BRI_MAC_REINIT;
 		goto retry;
 	}
 	d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n",
@@ -473,7 +483,9 @@ int i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri bm_flags)
  *
  * Returns: 0 if ok, < 0 errno code on error.
  *
- * Releases all the resources allocated to communicate with the device.
+ * Releases all the resources allocated to communicate with the
+ * device. Note we cannot destroy the workqueue earlier as until RX is
+ * fully destroyed, it could still try to schedule jobs.
  */
 static
 void __i2400m_dev_stop(struct i2400m *i2400m)
@@ -485,8 +497,8 @@ void __i2400m_dev_stop(struct i2400m *i2400m)
 	wimax_state_change(wimax_dev, __WIMAX_ST_QUIESCING);
 	i2400m_dev_shutdown(i2400m);
 	i2400m->ready = 0;
-	destroy_workqueue(i2400m->work_queue);
 	i2400m->bus_dev_stop(i2400m);
+	destroy_workqueue(i2400m->work_queue);
 	i2400m_rx_release(i2400m);
 	i2400m_tx_release(i2400m);
 	wimax_state_change(wimax_dev, WIMAX_ST_DOWN);
@@ -548,7 +560,7 @@ void __i2400m_dev_reset_handle(struct work_struct *ws)
 		 * i2400m_dev_stop() [we are shutting down anyway, so
 		 * ignore it] or we are resetting somewhere else. */
 		dev_err(dev, "device rebooted\n");
-		i2400m_msg_to_dev_cancel_wait(i2400m, -ERESTARTSYS);
+		i2400m_msg_to_dev_cancel_wait(i2400m, -EL3RST);
 		complete(&i2400m->msg_completion);
 		goto out;
 	}
@@ -598,6 +610,8 @@ out:
  */
 int i2400m_dev_reset_handle(struct i2400m *i2400m)
 {
+	i2400m->boot_mode = 1;
+	wmb();		/* Make sure i2400m_msg_to_dev() sees boot_mode */
 	return i2400m_schedule_work(i2400m, __i2400m_dev_reset_handle,
 				    GFP_ATOMIC);
 }
@@ -650,6 +664,7 @@ int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags)
 	result = i2400m_read_mac_addr(i2400m);
 	if (result < 0)
 		goto error_read_mac_addr;
+	random_ether_addr(i2400m->src_mac_addr);
 
 	result = register_netdev(net_dev);	/* Okey dokey, bring it up */
 	if (result < 0) {
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 675c6ce810c..e81750e5445 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -397,7 +397,7 @@ static int i2400m_download_chunk(struct i2400m *i2400m, const void *chunk,
 				 unsigned int direct, unsigned int do_csum)
 {
 	int ret;
-	size_t chunk_len = ALIGN(__chunk_len, I2400M_PL_PAD);
+	size_t chunk_len = ALIGN(__chunk_len, I2400M_PL_ALIGN);
 	struct device *dev = i2400m_dev(i2400m);
 	struct {
 		struct i2400m_bootrom_header cmd;
@@ -532,14 +532,14 @@ int i2400m_dnload_finalize(struct i2400m *i2400m,
 	cmd = (void *) bcf + offset;
 	if (i2400m->sboot == 0) {
 		struct i2400m_bootrom_header jump_ack;
-		d_printf(3, dev, "unsecure boot, jumping to 0x%08x\n",
+		d_printf(1, dev, "unsecure boot, jumping to 0x%08x\n",
 			le32_to_cpu(cmd->target_addr));
 		i2400m_brh_set_opcode(cmd, I2400M_BRH_JUMP);
 		cmd->data_size = 0;
 		ret = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd),
 				    &jump_ack, sizeof(jump_ack), 0);
 	} else {
-		d_printf(3, dev, "secure boot, jumping to 0x%08x\n",
+		d_printf(1, dev, "secure boot, jumping to 0x%08x\n",
 			 le32_to_cpu(cmd->target_addr));
 		cmd_buf = i2400m->bm_cmd_buf;
 		memcpy(&cmd_buf->cmd, cmd, sizeof(*cmd));
@@ -696,8 +696,7 @@ error_dev_gone:
 	return result;
 
 error_timeout:
-	dev_err(dev, "Timed out waiting for reboot ack, resetting\n");
-	i2400m->bus_reset(i2400m, I2400M_RT_BUS);
+	dev_err(dev, "Timed out waiting for reboot ack\n");
 	result = -ETIMEDOUT;
 	goto exit_timeout;
 }
@@ -770,40 +769,21 @@ error_read_mac:
 static
 int i2400m_dnload_init_nonsigned(struct i2400m *i2400m)
 {
-#define POKE(a, d) {					\
-	.address = cpu_to_le32(a),		\
-	.data = cpu_to_le32(d)		\
-}
-	static const struct {
-		__le32 address;
-		__le32 data;
-	} i2400m_pokes[] = {
-		POKE(0x081A58, 0xA7810230),
-		POKE(0x080040, 0x00000000),
-		POKE(0x080048, 0x00000082),
-		POKE(0x08004C, 0x0000081F),
-		POKE(0x080054, 0x00000085),
-		POKE(0x080058, 0x00000180),
-		POKE(0x08005C, 0x00000018),
-		POKE(0x080060, 0x00000010),
-		POKE(0x080574, 0x00000001),
-		POKE(0x080550, 0x00000005),
-		POKE(0xAE0000, 0x00000000),
-	};
-#undef POKE
-	unsigned i;
-	int ret;
+	unsigned i = 0;
+	int ret = 0;
 	struct device *dev = i2400m_dev(i2400m);
-
-	dev_warn(dev, "WARNING!!! non-signed boot UNTESTED PATH!\n");
-
 	d_fnstart(5, dev, "(i2400m %p)\n", i2400m);
-	for (i = 0; i < ARRAY_SIZE(i2400m_pokes); i++) {
-		ret = i2400m_download_chunk(i2400m, &i2400m_pokes[i].data,
-					    sizeof(i2400m_pokes[i].data),
-					    i2400m_pokes[i].address, 1, 1);
-		if (ret < 0)
-			break;
+	if (i2400m->bus_bm_pokes_table) {
+		while (i2400m->bus_bm_pokes_table[i].address) {
+			ret = i2400m_download_chunk(
+				i2400m,
+				&i2400m->bus_bm_pokes_table[i].data,
+				sizeof(i2400m->bus_bm_pokes_table[i].data),
+				i2400m->bus_bm_pokes_table[i].address, 1, 1);
+			if (ret < 0)
+				break;
+			i++;
+		}
 	}
 	d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, ret);
 	return ret;
@@ -980,11 +960,12 @@ int i2400m_fw_dnload(struct i2400m *i2400m, const struct i2400m_bcf_hdr *bcf,
 {
 	int ret = 0;
 	struct device *dev = i2400m_dev(i2400m);
-	int count = I2400M_BOOT_RETRIES;
+	int count = i2400m->bus_bm_retries;
 
 	d_fnstart(5, dev, "(i2400m %p bcf %p size %zu)\n",
 		  i2400m, bcf, bcf_size);
 	i2400m->boot_mode = 1;
+	wmb();		/* Make sure other readers see it */
 hw_reboot:
 	if (count-- == 0) {
 		ret = -ERESTARTSYS;
@@ -1033,6 +1014,7 @@ hw_reboot:
 	d_printf(2, dev, "fw %s successfully uploaded\n",
 		 i2400m->fw_name);
 	i2400m->boot_mode = 0;
+	wmb();		/* Make sure i2400m_msg_to_dev() sees boot_mode */
 error_dnload_finalize:
 error_dnload_bcf:
 error_dnload_init:
diff --git a/drivers/net/wimax/i2400m/i2400m-sdio.h b/drivers/net/wimax/i2400m/i2400m-sdio.h
index 08c2fb73923..9c4e3189f7b 100644
--- a/drivers/net/wimax/i2400m/i2400m-sdio.h
+++ b/drivers/net/wimax/i2400m/i2400m-sdio.h
@@ -78,6 +78,8 @@ enum {
 	/* The number of ticks to wait for the device to signal that
 	 * it is ready */
 	I2400MS_INIT_SLEEP_INTERVAL = 10,
+	/* How long to wait for the device to settle after reset */
+	I2400MS_SETTLE_TIME = 40,
 };
 
 
@@ -105,6 +107,10 @@ struct i2400ms {
 	char tx_wq_name[32];
 
 	struct dentry *debugfs_dentry;
+
+	wait_queue_head_t bm_wfa_wq;
+	int bm_wait_result;
+	size_t bm_ack_size;
 };
 
 
@@ -129,4 +135,7 @@ extern ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *,
 extern ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *,
 					   struct i2400m_bootrom_header *,
 					   size_t);
+extern void i2400ms_bus_bm_release(struct i2400m *);
+extern int i2400ms_bus_bm_setup(struct i2400m *);
+
 #endif /* #ifndef __I2400M_SDIO_H__ */
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 3ae2df38b59..60330f313f2 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -150,11 +150,33 @@
 enum {
 	/* Firmware uploading */
 	I2400M_BOOT_RETRIES = 3,
+	I3200_BOOT_RETRIES = 3,
 	/* Size of the Boot Mode Command buffer */
 	I2400M_BM_CMD_BUF_SIZE = 16 * 1024,
 	I2400M_BM_ACK_BUF_SIZE = 256,
 };
 
+/**
+ * struct i2400m_poke_table - Hardware poke table for the Intel 2400m
+ *
+ * This structure will be used to create a device specific poke table
+ * to put the device in a consistant state at boot time.
+ *
+ * @address: The device address to poke
+ *
+ * @data: The data value to poke to the device address
+ *
+ */
+struct i2400m_poke_table{
+	__le32 address;
+	__le32 data;
+};
+
+#define I2400M_FW_POKE(a, d) {		\
+	.address = cpu_to_le32(a),	\
+	.data = cpu_to_le32(d)		\
+}
+
 
 /**
  * i2400m_reset_type - methods to reset a device
@@ -224,6 +246,17 @@ struct i2400m_roq;
  *     process, so it cannot rely on common infrastructure being laid
  *     out.
  *
+ * @bus_bm_retries: [fill] How many times shall a firmware upload /
+ *     device initialization be retried? Different models of the same
+ *     device might need different values, hence it is set by the
+ *     bus-specific driver. Note this value is used in two places,
+ *     i2400m_fw_dnload() and __i2400m_dev_start(); they won't become
+ *     multiplicative (__i2400m_dev_start() calling N times
+ *     i2400m_fw_dnload() and this trying N times to download the
+ *     firmware), as if __i2400m_dev_start() only retries if the
+ *     firmware crashed while initializing the device (not in a
+ *     general case).
+ *
  * @bus_bm_cmd_send: [fill] Function called to send a boot-mode
  *     command. Flags are defined in 'enum i2400m_bm_cmd_flags'. This
  *     is synchronous and has to return 0 if ok or < 0 errno code in
@@ -252,6 +285,12 @@ struct i2400m_roq;
  *     address provided in boot mode is kind of broken and needs to
  *     be re-read later on.
  *
+ * @bus_bm_pokes_table: [fill/optional] A table of device addresses
+ *     and values that will be poked at device init time to move the
+ *     device to the correct state for the type of boot/firmware being
+ *     used.  This table MUST be terminated with (0x000000,
+ *     0x00000000) or bad things will happen.
+ *
  *
  * @wimax_dev: WiMAX generic device for linkage into the kernel WiMAX
  *     stack. Due to the way a net_device is allocated, we need to
@@ -323,6 +362,10 @@ struct i2400m_roq;
  *     delivered. Then the driver can release them to the host. See
  *     drivers/net/i2400m/rx.c for details.
  *
+ * @src_mac_addr: MAC address used to make ethernet packets be coming
+ *     from. This is generated at i2400m_setup() time and used during
+ *     the life cycle of the instance. See i2400m_fake_eth_header().
+ *
  * @init_mutex: Mutex used for serializing the device bringup
  *     sequence; this way if the device reboots in the middle, we
  *     don't try to do a bringup again while we are tearing down the
@@ -389,12 +432,14 @@ struct i2400m {
 	unsigned ready:1;		/* all probing steps done */
 	unsigned rx_reorder:1;		/* RX reorder is enabled */
 	u8 trace_msg_from_user;		/* echo rx msgs to 'trace' pipe */
-					/* typed u8 so debugfs/u8 can tweak */
+					/* typed u8 so /sys/kernel/debug/u8 can tweak */
 	enum i2400m_system_state state;
 	wait_queue_head_t state_wq;	/* Woken up when on state updates */
 
 	size_t bus_tx_block_size;
 	size_t bus_pl_size_max;
+	unsigned bus_bm_retries;
+
 	int (*bus_dev_start)(struct i2400m *);
 	void (*bus_dev_stop)(struct i2400m *);
 	void (*bus_tx_kick)(struct i2400m *);
@@ -406,6 +451,7 @@ struct i2400m {
 				       struct i2400m_bootrom_header *, size_t);
 	const char **bus_fw_names;
 	unsigned bus_bm_mac_addr_impaired:1;
+	const struct i2400m_poke_table *bus_bm_pokes_table;
 
 	spinlock_t tx_lock;		/* protect TX state */
 	void *tx_buf;
@@ -421,6 +467,7 @@ struct i2400m {
 	unsigned rx_pl_num, rx_pl_max, rx_pl_min,
 		rx_num, rx_size_acc, rx_size_min, rx_size_max;
 	struct i2400m_roq *rx_roq;	/* not under rx_lock! */
+	u8 src_mac_addr[ETH_HLEN];
 
 	struct mutex msg_mutex;		/* serialize command execution */
 	struct completion msg_completion;
@@ -704,6 +751,7 @@ static const __le32 i2400m_SBOOT_BARKER[4] = {
 	cpu_to_le32(I2400M_SBOOT_BARKER)
 };
 
+extern int i2400m_power_save_disabled;
 
 /*
  * Utility functions
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 6b1fe7a81f2..9653f478b38 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -404,10 +404,12 @@ static
 void i2400m_rx_fake_eth_header(struct net_device *net_dev,
 			       void *_eth_hdr, __be16 protocol)
 {
+	struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
 	struct ethhdr *eth_hdr = _eth_hdr;
 
 	memcpy(eth_hdr->h_dest, net_dev->dev_addr, sizeof(eth_hdr->h_dest));
-	memset(eth_hdr->h_source, 0, sizeof(eth_hdr->h_dest));
+	memcpy(eth_hdr->h_source, i2400m->src_mac_addr,
+	       sizeof(eth_hdr->h_source));
 	eth_hdr->h_proto = protocol;
 }
 
diff --git a/drivers/net/wimax/i2400m/op-rfkill.c b/drivers/net/wimax/i2400m/op-rfkill.c
index 487ec58cea4..43927b5d7ad 100644
--- a/drivers/net/wimax/i2400m/op-rfkill.c
+++ b/drivers/net/wimax/i2400m/op-rfkill.c
@@ -54,8 +54,10 @@ int i2400m_radio_is(struct i2400m *i2400m, enum wimax_rf_state state)
 		/* state == WIMAX_RF_ON */
 		return i2400m->state != I2400M_SS_RF_OFF
 			&& i2400m->state != I2400M_SS_RF_SHUTDOWN;
-	else
+	else {
 		BUG();
+		return -EINVAL;	/* shut gcc warnings on certain arches */
+	}
 }
 
 
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index f9fc3890232..07c32e68909 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -177,7 +177,8 @@ void i2400m_report_hook_work(struct work_struct *ws)
 	struct i2400m_work *iw =
 		container_of(ws, struct i2400m_work, ws);
 	struct i2400m_report_hook_args *args = (void *) iw->pl;
-	i2400m_report_hook(iw->i2400m, args->l3l4_hdr, args->size);
+	if (iw->i2400m->ready)
+		i2400m_report_hook(iw->i2400m, args->l3l4_hdr, args->size);
 	kfree_skb(args->skb_rx);
 	i2400m_put(iw->i2400m);
 	kfree(iw);
@@ -309,6 +310,9 @@ void i2400m_rx_ctl(struct i2400m *i2400m, struct sk_buff *skb_rx,
 		skb_get(skb_rx);
 		i2400m_queue_work(i2400m, i2400m_report_hook_work,
 				  GFP_KERNEL, &args, sizeof(args));
+		if (unlikely(i2400m->trace_msg_from_user))
+			wimax_msg(&i2400m->wimax_dev, "echo",
+				  l3l4_hdr, size, GFP_KERNEL);
 		result = wimax_msg(&i2400m->wimax_dev, NULL, l3l4_hdr, size,
 				   GFP_KERNEL);
 		if (result < 0)
@@ -1144,7 +1148,7 @@ int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb)
 	num_pls = le16_to_cpu(msg_hdr->num_pls);
 	pl_itr = sizeof(*msg_hdr) +	/* Check payload descriptor(s) */
 		num_pls * sizeof(msg_hdr->pld[0]);
-	pl_itr = ALIGN(pl_itr, I2400M_PL_PAD);
+	pl_itr = ALIGN(pl_itr, I2400M_PL_ALIGN);
 	if (pl_itr > skb->len) {	/* got all the payload descriptors? */
 		dev_err(dev, "RX: HW BUG? message too short (%u bytes) for "
 			"%u payload descriptors (%zu each, total %zu)\n",
@@ -1162,7 +1166,7 @@ int i2400m_rx(struct i2400m *i2400m, struct sk_buff *skb)
 		single_last = num_pls == 1 || i == num_pls - 1;
 		i2400m_rx_payload(i2400m, skb, single_last, &msg_hdr->pld[i],
 				  skb->data + pl_itr);
-		pl_itr += ALIGN(pl_size, I2400M_PL_PAD);
+		pl_itr += ALIGN(pl_size, I2400M_PL_ALIGN);
 		cond_resched();		/* Don't monopolize */
 	}
 	kfree_skb(skb);
diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c
index 3487205d8f5..7d6ec0f475f 100644
--- a/drivers/net/wimax/i2400m/sdio-fw.c
+++ b/drivers/net/wimax/i2400m/sdio-fw.c
@@ -46,17 +46,24 @@
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *  - SDIO rehash for changes in the bus-driver model
  *
+ * Dirk Brandewie <dirk.j.brandewie@intel.com>
+ *  - Make it IRQ based, not polling
+ *
  * THE PROCEDURE
  *
  * See fw.c for the generic description of this procedure.
  *
  * This file implements only the SDIO specifics. It boils down to how
  * to send a command and waiting for an acknowledgement from the
- * device. We do polled reads.
+ * device.
+ *
+ * All this code is sequential -- all i2400ms_bus_bm_*() functions are
+ * executed in the same thread, except i2400ms_bm_irq() [on its own by
+ * the SDIO driver]. This makes it possible to avoid locking.
  *
  * COMMAND EXECUTION
  *
- * THe generic firmware upload code will call i2400m_bus_bm_cmd_send()
+ * The generic firmware upload code will call i2400m_bus_bm_cmd_send()
  * to send commands.
  *
  * The SDIO devices expects things in 256 byte blocks, so it will pad
@@ -64,12 +71,15 @@
  *
  * ACK RECEPTION
  *
- * This works in polling mode -- the fw loader says when to wait for
- * data and for that it calls i2400ms_bus_bm_wait_for_ack().
+ * This works in IRQ mode -- the fw loader says when to wait for data
+ * and for that it calls i2400ms_bus_bm_wait_for_ack().
  *
- * This will poll the device for data until it is received. We need to
- * receive at least as much bytes as where asked for (although it'll
- * always be a multiple of 256 bytes).
+ * This checks if there is any data available (RX size > 0); if not,
+ * waits for the IRQ handler to notify about it. Once there is data,
+ * it is read and passed to the caller. Doing it this way we don't
+ * need much coordination/locking, and it makes it much more difficult
+ * for an interrupt to be lost and the wait_for_ack() function getting
+ * stuck even when data is pending.
  */
 #include <linux/mmc/sdio_func.h>
 #include "i2400m-sdio.h"
@@ -78,6 +88,7 @@
 #define D_SUBMODULE fw
 #include "sdio-debug-levels.h"
 
+
 /*
  * Send a boot-mode command to the SDIO function
  *
@@ -139,7 +150,7 @@ error_too_big:
 
 
 /*
- * Read an ack from the device's boot-mode (polling)
+ * Read an ack from the device's boot-mode
  *
  * @i2400m:
  * @_ack: pointer to where to store the read data
@@ -150,75 +161,49 @@ error_too_big:
  * The ACK for a BM command is always at least sizeof(*ack) bytes, so
  * check for that. We don't need to check for device reboots
  *
- * NOTE: We do an artificial timeout of 1 sec over the SDIO timeout;
- *     this way we have control over it...there is no way that I know
- *     of setting an SDIO transaction timeout.
  */
 ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
 				    struct i2400m_bootrom_header *ack,
 				    size_t ack_size)
 {
-	int result;
-	ssize_t rx_size;
-	u64 timeout;
+	ssize_t result;
 	struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
+	int size;
 
 	BUG_ON(sizeof(*ack) > ack_size);
 
 	d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
 		  i2400m, ack, ack_size);
 
-	timeout = get_jiffies_64() + 2 * HZ;
-	sdio_claim_host(func);
-	while (1) {
-		if (time_after64(get_jiffies_64(), timeout)) {
-			rx_size = -ETIMEDOUT;
-			dev_err(dev, "timeout waiting for ack data\n");
-			goto error_timedout;
-		}
+	spin_lock(&i2400m->rx_lock);
+	i2400ms->bm_ack_size = -EINPROGRESS;
+	spin_unlock(&i2400m->rx_lock);
 
-		/* Find the RX size, check if it fits or not -- it if
-		 * doesn't fit, fail, as we have no way to dispose of
-		 * the extra data. */
-		rx_size = __i2400ms_rx_get_size(i2400ms);
-		if (rx_size < 0)
-			goto error_rx_get_size;
-		result = -ENOSPC;		/* Check it fits */
-		if (rx_size < sizeof(*ack)) {
-			rx_size = -EIO;
-			dev_err(dev, "HW BUG? received is too small (%zu vs "
-				"%zu needed)\n", sizeof(*ack), rx_size);
-			goto error_too_small;
-		}
-		if (rx_size > I2400M_BM_ACK_BUF_SIZE) {
-			dev_err(dev, "SW BUG? BM_ACK_BUF is too small (%u vs "
-				"%zu needed)\n", I2400M_BM_ACK_BUF_SIZE,
-				rx_size);
-			goto error_too_small;
-		}
+	result = wait_event_timeout(i2400ms->bm_wfa_wq,
+				    i2400ms->bm_ack_size != -EINPROGRESS,
+				    2 * HZ);
+	if (result == 0) {
+		result = -ETIMEDOUT;
+		dev_err(dev, "BM: error waiting for an ack\n");
+		goto error_timeout;
+	}
 
-		/* Read it */
-		result = sdio_memcpy_fromio(func, i2400m->bm_ack_buf,
-					    I2400MS_DATA_ADDR, rx_size);
-		if (result == -ETIMEDOUT || result == -ETIME)
-			continue;
-		if (result < 0) {
-			dev_err(dev, "BM SDIO receive (%zu B) failed: %d\n",
-				rx_size, result);
-			goto error_read;
-		} else
-			break;
+	spin_lock(&i2400m->rx_lock);
+	result = i2400ms->bm_ack_size;
+	BUG_ON(result == -EINPROGRESS);
+	if (result < 0)        /* so we exit when rx_release() is called */
+		dev_err(dev, "BM: %s failed: %zd\n", __func__, result);
+	else {
+		size = min(ack_size, i2400ms->bm_ack_size);
+		memcpy(ack, i2400m->bm_ack_buf, size);
 	}
-	rx_size = min((ssize_t)ack_size, rx_size);
-	memcpy(ack, i2400m->bm_ack_buf, rx_size);
-error_read:
-error_too_small:
-error_rx_get_size:
-error_timedout:
-	sdio_release_host(func);
-	d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %ld\n",
-		i2400m, ack, ack_size, (long) rx_size);
-	return rx_size;
+	i2400ms->bm_ack_size = -EINPROGRESS;
+	spin_unlock(&i2400m->rx_lock);
+
+error_timeout:
+	d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n",
+		i2400m, ack, ack_size, result);
+	return result;
 }
diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c
index a3008b904f7..321beadf6e4 100644
--- a/drivers/net/wimax/i2400m/sdio-rx.c
+++ b/drivers/net/wimax/i2400m/sdio-rx.c
@@ -69,6 +69,13 @@
 #define D_SUBMODULE rx
 #include "sdio-debug-levels.h"
 
+static const __le32 i2400m_ACK_BARKER[4] = {
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER)
+};
+
 
 /*
  * Read and return the amount of bytes available for RX
@@ -131,25 +138,35 @@ void i2400ms_rx(struct i2400ms *i2400ms)
 		ret = rx_size;
 		goto error_get_size;
 	}
+
 	ret = -ENOMEM;
 	skb = alloc_skb(rx_size, GFP_ATOMIC);
 	if (NULL == skb) {
 		dev_err(dev, "RX: unable to alloc skb\n");
 		goto error_alloc_skb;
 	}
-
 	ret = sdio_memcpy_fromio(func, skb->data,
 				 I2400MS_DATA_ADDR, rx_size);
 	if (ret < 0) {
 		dev_err(dev, "RX: SDIO data read failed: %d\n", ret);
 		goto error_memcpy_fromio;
 	}
-	/* Check if device has reset */
-	if (!memcmp(skb->data, i2400m_NBOOT_BARKER,
-		    sizeof(i2400m_NBOOT_BARKER))
-	    || !memcmp(skb->data, i2400m_SBOOT_BARKER,
-		       sizeof(i2400m_SBOOT_BARKER))) {
+
+	rmb();	/* make sure we get boot_mode from dev_reset_handle */
+	if (i2400m->boot_mode == 1) {
+		spin_lock(&i2400m->rx_lock);
+		i2400ms->bm_ack_size = rx_size;
+		spin_unlock(&i2400m->rx_lock);
+		memcpy(i2400m->bm_ack_buf, skb->data, rx_size);
+		wake_up(&i2400ms->bm_wfa_wq);
+		dev_err(dev, "RX: SDIO boot mode message\n");
+		kfree_skb(skb);
+	} else if (unlikely(!memcmp(skb->data, i2400m_NBOOT_BARKER,
+				    sizeof(i2400m_NBOOT_BARKER))
+			    || !memcmp(skb->data, i2400m_SBOOT_BARKER,
+				       sizeof(i2400m_SBOOT_BARKER)))) {
 		ret = i2400m_dev_reset_handle(i2400m);
+		dev_err(dev, "RX: SDIO reboot barker\n");
 		kfree_skb(skb);
 	} else {
 		skb_put(skb, rx_size);
@@ -179,7 +196,6 @@ void i2400ms_irq(struct sdio_func *func)
 {
 	int ret;
 	struct i2400ms *i2400ms = sdio_get_drvdata(func);
-	struct i2400m *i2400m = &i2400ms->i2400m;
 	struct device *dev = &func->dev;
 	int val;
 
@@ -194,10 +210,7 @@ void i2400ms_irq(struct sdio_func *func)
 		goto error_no_irq;
 	}
 	sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret);
-	if (WARN_ON(i2400m->boot_mode != 0))
-		dev_err(dev, "RX: SW BUG? boot mode and IRQ is up?\n");
-	else
-		i2400ms_rx(i2400ms);
+	i2400ms_rx(i2400ms);
 error_no_irq:
 	d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms);
 	return;
@@ -214,8 +227,15 @@ int i2400ms_rx_setup(struct i2400ms *i2400ms)
 	int result;
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
+	struct i2400m *i2400m = &i2400ms->i2400m;
 
 	d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
+
+	init_waitqueue_head(&i2400ms->bm_wfa_wq);
+	spin_lock(&i2400m->rx_lock);
+	i2400ms->bm_wait_result = -EINPROGRESS;
+	spin_unlock(&i2400m->rx_lock);
+
 	sdio_claim_host(func);
 	result = sdio_claim_irq(func, i2400ms_irq);
 	if (result < 0) {
@@ -245,8 +265,13 @@ void i2400ms_rx_release(struct i2400ms *i2400ms)
 	int result;
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
+	struct i2400m *i2400m = &i2400ms->i2400m;
 
 	d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
+	spin_lock(&i2400m->rx_lock);
+	i2400ms->bm_ack_size = -EINTR;
+	spin_unlock(&i2400m->rx_lock);
+	wake_up_all(&i2400ms->bm_wfa_wq);
 	sdio_claim_host(func);
 	sdio_writeb(func, 0, I2400MS_INTR_ENABLE_ADDR, &result);
 	sdio_release_irq(func);
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 5ac5e76701c..2538825d1c6 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -78,6 +78,14 @@ static const char *i2400ms_bus_fw_names[] = {
 };
 
 
+static const struct i2400m_poke_table i2400ms_pokes[] = {
+	I2400M_FW_POKE(0x6BE260, 0x00000088),
+	I2400M_FW_POKE(0x080550, 0x00000005),
+	I2400M_FW_POKE(0xAE0000, 0x00000000),
+	I2400M_FW_POKE(0x000000, 0x00000000), /* MUST be 0 terminated or bad
+					       * things will happen */
+};
+
 /*
  * Enable the SDIO function
  *
@@ -148,19 +156,14 @@ int i2400ms_bus_dev_start(struct i2400m *i2400m)
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
 	msleep(200);
-	result = i2400ms_rx_setup(i2400ms);
-	if (result < 0)
-		goto error_rx_setup;
 	result = i2400ms_tx_setup(i2400ms);
 	if (result < 0)
 		goto error_tx_setup;
 	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
 	return result;
 
-	i2400ms_tx_release(i2400ms);
 error_tx_setup:
-	i2400ms_rx_release(i2400ms);
-error_rx_setup:
+	i2400ms_tx_release(i2400ms);
 	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 	return result;
 }
@@ -174,7 +177,6 @@ void i2400ms_bus_dev_stop(struct i2400m *i2400m)
 	struct device *dev = &func->dev;
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
-	i2400ms_rx_release(i2400ms);
 	i2400ms_tx_release(i2400ms);
 	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 }
@@ -255,7 +257,7 @@ error_kzalloc:
 static
 int i2400ms_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
 {
-	int result;
+	int result = 0;
 	struct i2400ms *i2400ms =
 		container_of(i2400m, struct i2400ms, i2400m);
 	struct device *dev = i2400m_dev(i2400m);
@@ -280,8 +282,25 @@ int i2400ms_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
 					       sizeof(i2400m_COLD_BOOT_BARKER));
 	else if (rt == I2400M_RT_BUS) {
 do_bus_reset:
-		dev_err(dev, "FIXME: SDIO bus reset not implemented\n");
-		result = rt == I2400M_RT_WARM ? -ENODEV : -ENOSYS;
+		/* call netif_tx_disable() before sending IOE disable,
+		 * so that all the tx from network layer are stopped
+		 * while IOE is being reset. Make sure it is called
+		 * only after register_netdev() was issued.
+		 */
+		if (i2400m->wimax_dev.net_dev->reg_state == NETREG_REGISTERED)
+			netif_tx_disable(i2400m->wimax_dev.net_dev);
+
+		i2400ms_rx_release(i2400ms);
+		sdio_claim_host(i2400ms->func);
+		sdio_disable_func(i2400ms->func);
+		sdio_release_host(i2400ms->func);
+
+		/* Wait for the device to settle */
+		msleep(40);
+
+		result = i2400ms_enable_function(i2400ms->func);
+		if (result >= 0)
+			i2400ms_rx_setup(i2400ms);
 	} else
 		BUG();
 	if (result < 0 && rt != I2400M_RT_BUS) {
@@ -404,24 +423,32 @@ int i2400ms_probe(struct sdio_func *func,
 	i2400m->bus_dev_stop = i2400ms_bus_dev_stop;
 	i2400m->bus_tx_kick = i2400ms_bus_tx_kick;
 	i2400m->bus_reset = i2400ms_bus_reset;
+	/* The iwmc3200-wimax sometimes requires the driver to try
+	 * hard when we paint it into a corner. */
+	i2400m->bus_bm_retries = I3200_BOOT_RETRIES;
 	i2400m->bus_bm_cmd_send = i2400ms_bus_bm_cmd_send;
 	i2400m->bus_bm_wait_for_ack = i2400ms_bus_bm_wait_for_ack;
 	i2400m->bus_fw_names = i2400ms_bus_fw_names;
 	i2400m->bus_bm_mac_addr_impaired = 1;
-
-	result = i2400ms_enable_function(i2400ms->func);
-	if (result < 0) {
-		dev_err(dev, "Cannot enable SDIO function: %d\n", result);
-		goto error_func_enable;
-	}
+	i2400m->bus_bm_pokes_table = &i2400ms_pokes[0];
 
 	sdio_claim_host(func);
 	result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
+	sdio_release_host(func);
 	if (result < 0) {
 		dev_err(dev, "Failed to set block size: %d\n", result);
 		goto error_set_blk_size;
 	}
-	sdio_release_host(func);
+
+	result = i2400ms_enable_function(i2400ms->func);
+	if (result < 0) {
+		dev_err(dev, "Cannot enable SDIO function: %d\n", result);
+		goto error_func_enable;
+	}
+
+	result = i2400ms_rx_setup(i2400ms);
+	if (result < 0)
+		goto error_rx_setup;
 
 	result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
 	if (result < 0) {
@@ -440,12 +467,14 @@ int i2400ms_probe(struct sdio_func *func,
 error_debugfs_add:
 	i2400m_release(i2400m);
 error_setup:
-	sdio_set_drvdata(func, NULL);
+	i2400ms_rx_release(i2400ms);
+error_rx_setup:
 	sdio_claim_host(func);
-error_set_blk_size:
 	sdio_disable_func(func);
 	sdio_release_host(func);
 error_func_enable:
+error_set_blk_size:
+	sdio_set_drvdata(func, NULL);
 	free_netdev(net_dev);
 error_alloc_netdev:
 	return result;
@@ -462,6 +491,7 @@ void i2400ms_remove(struct sdio_func *func)
 
 	d_fnstart(3, dev, "SDIO func %p\n", func);
 	debugfs_remove_recursive(i2400ms->debugfs_dentry);
+	i2400ms_rx_release(i2400ms);
 	i2400m_release(i2400m);
 	sdio_set_drvdata(func, NULL);
 	sdio_claim_host(func);
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index 613a88ffd65..fa16ccf8e26 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -278,6 +278,48 @@ enum {
 #define TAIL_FULL ((void *)~(unsigned long)NULL)
 
 /*
+ * Calculate how much tail room is available
+ *
+ * Note the trick here. This path is ONLY caleed for Case A (see
+ * i2400m_tx_fifo_push() below), where we have:
+ *
+ *       Case A
+ * N  ___________
+ *   | tail room |
+ *   |           |
+ *   |<-  IN   ->|
+ *   |           |
+ *   |   data    |
+ *   |           |
+ *   |<-  OUT  ->|
+ *   |           |
+ *   | head room |
+ * 0  -----------
+ *
+ * When calculating the tail_room, tx_in might get to be zero if
+ * i2400m->tx_in is right at the end of the buffer (really full
+ * buffer) if there is no head room. In this case, tail_room would be
+ * I2400M_TX_BUF_SIZE, although it is actually zero. Hence the final
+ * mod (%) operation. However, when doing this kind of optimization,
+ * i2400m->tx_in being zero would fail, so we treat is an a special
+ * case.
+ */
+static inline
+size_t __i2400m_tx_tail_room(struct i2400m *i2400m)
+{
+	size_t tail_room;
+	size_t tx_in;
+
+	if (unlikely(i2400m->tx_in) == 0)
+		return I2400M_TX_BUF_SIZE;
+	tx_in = i2400m->tx_in % I2400M_TX_BUF_SIZE;
+	tail_room = I2400M_TX_BUF_SIZE - tx_in;
+	tail_room %= I2400M_TX_BUF_SIZE;
+	return tail_room;
+}
+
+
+/*
  * Allocate @size bytes in the TX fifo, return a pointer to it
  *
  * @i2400m: device descriptor
@@ -338,7 +380,7 @@ void *i2400m_tx_fifo_push(struct i2400m *i2400m, size_t size, size_t padding)
 		return NULL;
 	}
 	/* Is there space at the tail? */
-	tail_room = I2400M_TX_BUF_SIZE - i2400m->tx_in % I2400M_TX_BUF_SIZE;
+	tail_room = __i2400m_tx_tail_room(i2400m);
 	if (tail_room < needed_size) {
 		if (i2400m->tx_out % I2400M_TX_BUF_SIZE
 		    < i2400m->tx_in % I2400M_TX_BUF_SIZE) {
@@ -367,17 +409,29 @@ void *i2400m_tx_fifo_push(struct i2400m *i2400m, size_t size, size_t padding)
  * (I2400M_PL_PAD for the payloads, I2400M_TX_PLD_SIZE for the
  * header).
  *
+ * Tail room can get to be zero if a message was opened when there was
+ * space only for a header. _tx_close() will mark it as to-skip (as it
+ * will have no payloads) and there will be no more space to flush, so
+ * nothing has to be done here. This is probably cheaper than ensuring
+ * in _tx_new() that there is some space for payloads...as we could
+ * always possibly hit the same problem if the payload wouldn't fit.
+ *
  * Note:
  *
  *     Assumes i2400m->tx_lock is taken, and we use that as a barrier
+ *
+ *     This path is only taken for Case A FIFO situations [see
+ *     i2400m_tx_fifo_push()]
  */
 static
 void i2400m_tx_skip_tail(struct i2400m *i2400m)
 {
 	struct device *dev = i2400m_dev(i2400m);
 	size_t tx_in = i2400m->tx_in % I2400M_TX_BUF_SIZE;
-	size_t tail_room = I2400M_TX_BUF_SIZE - tx_in;
+	size_t tail_room = __i2400m_tx_tail_room(i2400m);
 	struct i2400m_msg_hdr *msg = i2400m->tx_buf + tx_in;
+	if (unlikely(tail_room == 0))
+		return;
 	BUG_ON(tail_room < sizeof(*msg));
 	msg->size = tail_room | I2400M_TX_SKIP;
 	d_printf(2, dev, "skip tail: skipping %zu bytes @%zu\n",
@@ -474,10 +528,18 @@ void i2400m_tx_close(struct i2400m *i2400m)
 	struct i2400m_msg_hdr *tx_msg_moved;
 	size_t aligned_size, padding, hdr_size;
 	void *pad_buf;
+	unsigned num_pls;
 
 	if (tx_msg->size & I2400M_TX_SKIP)	/* a skipper? nothing to do */
 		goto out;
-
+	num_pls = le16_to_cpu(tx_msg->num_pls);
+	/* We can get this situation when a new message was started
+	 * and there was no space to add payloads before hitting the
+	 tail (and taking padding into consideration). */
+	if (num_pls == 0) {
+		tx_msg->size |= I2400M_TX_SKIP;
+		goto out;
+	}
 	/* Relocate the message header
 	 *
 	 * Find the current header size, align it to 16 and if we need
@@ -491,7 +553,7 @@ void i2400m_tx_close(struct i2400m *i2400m)
 	 */
 	hdr_size = sizeof(*tx_msg)
 		+ le16_to_cpu(tx_msg->num_pls) * sizeof(tx_msg->pld[0]);
-	hdr_size = ALIGN(hdr_size, I2400M_PL_PAD);
+	hdr_size = ALIGN(hdr_size, I2400M_PL_ALIGN);
 	tx_msg->offset = I2400M_TX_PLD_SIZE - hdr_size;
 	tx_msg_moved = (void *) tx_msg + tx_msg->offset;
 	memmove(tx_msg_moved, tx_msg, hdr_size);
@@ -574,7 +636,7 @@ int i2400m_tx(struct i2400m *i2400m, const void *buf, size_t buf_len,
 
 	d_fnstart(3, dev, "(i2400m %p skb %p [%zu bytes] pt %u)\n",
 		  i2400m, buf, buf_len, pl_type);
-	padded_len = ALIGN(buf_len, I2400M_PL_PAD);
+	padded_len = ALIGN(buf_len, I2400M_PL_ALIGN);
 	d_printf(5, dev, "padded_len %zd buf_len %zd\n", padded_len, buf_len);
 	/* If there is no current TX message, create one; if the
 	 * current one is out of payload slots or we have a singleton,
@@ -591,6 +653,8 @@ try_new:
 		i2400m_tx_close(i2400m);
 		i2400m_tx_new(i2400m);
 	}
+	if (i2400m->tx_msg == NULL)
+		goto error_tx_new;
 	if (i2400m->tx_msg->size + padded_len > I2400M_TX_BUF_SIZE / 2) {
 		d_printf(2, dev, "TX: message too big, going new\n");
 		i2400m_tx_close(i2400m);
@@ -773,7 +837,6 @@ void i2400m_tx_msg_sent(struct i2400m *i2400m)
 	n = i2400m->tx_out / I2400M_TX_BUF_SIZE;
 	i2400m->tx_out %= I2400M_TX_BUF_SIZE;
 	i2400m->tx_in -= n * I2400M_TX_BUF_SIZE;
-	netif_start_queue(i2400m->wimax_dev.net_dev);
 	spin_unlock_irqrestore(&i2400m->tx_lock, flags);
 	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 }
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 17851321b7f..cfdaf69da9d 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -254,8 +254,10 @@ do_bus_reset:
 			dev_err(dev, "USB reset failed (%d), giving up!\n",
 				result);
 		}
-	} else
+	} else {
+		result = -EINVAL;	/* shut gcc up in certain arches */
 		BUG();
+	}
 	if (result < 0
 	    && result != -EINVAL	/* device is gone */
 	    && rt != I2400M_RT_BUS) {
@@ -399,6 +401,7 @@ int i2400mu_probe(struct usb_interface *iface,
 	i2400m->bus_dev_stop = i2400mu_bus_dev_stop;
 	i2400m->bus_tx_kick = i2400mu_bus_tx_kick;
 	i2400m->bus_reset = i2400mu_bus_reset;
+	i2400m->bus_bm_retries = I2400M_BOOT_RETRIES;
 	i2400m->bus_bm_cmd_send = i2400mu_bus_bm_cmd_send;
 	i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
 	i2400m->bus_fw_names = i2400mu_bus_fw_names;
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 3d94e7dfea6..5bc00db21b2 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -146,14 +146,14 @@ config LIBERTAS_CS
 	  A driver for Marvell Libertas 8385 CompactFlash devices.
 
 config LIBERTAS_SDIO
-	tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards"
+	tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
 	depends on LIBERTAS && MMC
 	---help---
-	  A driver for Marvell Libertas 8385 and 8686 SDIO devices.
+	  A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
 
 config LIBERTAS_SPI
 	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
-	depends on LIBERTAS && SPI && GENERIC_GPIO
+	depends on LIBERTAS && SPI
 	---help---
 	  A driver for Marvell Libertas 8686 SPI devices.
 
@@ -310,7 +310,7 @@ config PRISM54
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called prism54.ko.
+	  The module will be called prism54.
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
@@ -333,6 +333,7 @@ config USB_ZD1201
 config USB_NET_RNDIS_WLAN
 	tristate "Wireless RNDIS USB support"
 	depends on USB && WLAN_80211 && EXPERIMENTAL
+	depends on CFG80211
 	select USB_USBNET
 	select USB_NET_CDCETHER
 	select USB_NET_RNDIS_HOST
@@ -434,6 +435,13 @@ config RTL8187
 
 	  Thanks to Realtek for their support!
 
+# If possible, automatically enable LEDs for RTL8187.
+
+config RTL8187_LEDS
+	bool
+	depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187)
+	default y
+
 config ADM8211
 	tristate "ADMtek ADM8211 support"
 	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
@@ -484,9 +492,7 @@ config MWL8K
 	  will be called mwl8k.  If unsure, say N.
 
 source "drivers/net/wireless/p54/Kconfig"
-source "drivers/net/wireless/ath5k/Kconfig"
-source "drivers/net/wireless/ath9k/Kconfig"
-source "drivers/net/wireless/ar9170/Kconfig"
+source "drivers/net/wireless/ath/Kconfig"
 source "drivers/net/wireless/ipw2x00/Kconfig"
 source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/hostap/Kconfig"
@@ -495,5 +501,7 @@ source "drivers/net/wireless/b43legacy/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
 source "drivers/net/wireless/rt2x00/Kconfig"
 source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/iwmc3200wifi/Kconfig"
 
 endmenu
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 50e7fba7f0e..7a4647e78fd 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -55,8 +55,10 @@ obj-$(CONFIG_RT2X00)	+= rt2x00/
 
 obj-$(CONFIG_P54_COMMON)	+= p54/
 
-obj-$(CONFIG_ATH5K)	+= ath5k/
-obj-$(CONFIG_ATH9K)	+= ath9k/
-obj-$(CONFIG_AR9170_USB)	+= ar9170/
+obj-$(CONFIG_ATH_COMMON)	+= ath/
 
 obj-$(CONFIG_MAC80211_HWSIM)	+= mac80211_hwsim.o
+
+obj-$(CONFIG_WL12XX)	+= wl12xx/
+
+obj-$(CONFIG_IWM)	+= iwmc3200wifi/
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index f7182179501..2b9e379994a 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1311,18 +1311,20 @@ static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
-static int adm8211_config_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
+static void adm8211_bss_info_changed(struct ieee80211_hw *dev,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *conf,
+				     u32 changes)
 {
 	struct adm8211_priv *priv = dev->priv;
 
+	if (!(changes & BSS_CHANGED_BSSID))
+		return;
+
 	if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
 		adm8211_set_bssid(dev, conf->bssid);
 		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
 	}
-
-	return 0;
 }
 
 static void adm8211_configure_filter(struct ieee80211_hw *dev,
@@ -1753,7 +1755,7 @@ static const struct ieee80211_ops adm8211_ops = {
 	.add_interface		= adm8211_add_interface,
 	.remove_interface	= adm8211_remove_interface,
 	.config			= adm8211_config,
-	.config_interface	= adm8211_config_interface,
+	.bss_info_changed	= adm8211_bss_info_changed,
 	.configure_filter	= adm8211_configure_filter,
 	.get_stats		= adm8211_get_stats,
 	.get_tx_stats		= adm8211_get_tx_stats,
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 9eabf4d1f2e..c70604f0329 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1935,7 +1935,7 @@ static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) {
 		netif_stop_queue (dev);
 		if (npacks > MAXTXQ) {
 			dev->stats.tx_fifo_errors++;
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 		skb_queue_tail (&ai->txq, skb);
 		return 0;
@@ -2139,7 +2139,7 @@ static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) {
 
 		if (i == MAX_FIDS / 2) {
 			dev->stats.tx_fifo_errors++;
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 	}
 	/* check min length*/
@@ -2193,7 +2193,8 @@ static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) {
 	if (test_bit(FLAG_MPI, &priv->flags)) {
 		/* Not implemented yet for MPI350 */
 		netif_stop_queue(dev);
-		return -ENETDOWN;
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
 	}
 
 	if ( skb == NULL ) {
@@ -2210,7 +2211,7 @@ static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) {
 
 		if (i == MAX_FIDS) {
 			dev->stats.tx_fifo_errors++;
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 	}
 	/* check min length*/
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index a54a67c425c..d84caf198a2 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -1199,7 +1199,7 @@ bad_end:
 	arlan_process_interrupt(dev);
 	netif_stop_queue (dev);
 	ARLAN_DEBUG_EXIT("arlan_tx");
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 
 
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 8d93ca4651b..4efbdbe6d6b 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1965,13 +1965,18 @@ static int at76_config(struct ieee80211_hw *hw, u32 changed)
 	return 0;
 }
 
-static int at76_config_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_vif *vif,
-				 struct ieee80211_if_conf *conf)
+static void at76_bss_info_changed(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_bss_conf *conf,
+				  u32 changed)
 {
 	struct at76_priv *priv = hw->priv;
 
 	at76_dbg(DBG_MAC80211, "%s():", __func__);
+
+	if (!(changed & BSS_CHANGED_BSSID))
+		return;
+
 	at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
 
 	mutex_lock(&priv->mtx);
@@ -1983,8 +1988,6 @@ static int at76_config_interface(struct ieee80211_hw *hw,
 		at76_join(priv);
 
 	mutex_unlock(&priv->mtx);
-
-	return 0;
 }
 
 /* must be atomic */
@@ -2076,7 +2079,7 @@ static const struct ieee80211_ops at76_ops = {
 	.add_interface = at76_add_interface,
 	.remove_interface = at76_remove_interface,
 	.config = at76_config,
-	.config_interface = at76_config_interface,
+	.bss_info_changed = at76_bss_info_changed,
 	.configure_filter = at76_configure_filter,
 	.start = at76_mac80211_start,
 	.stop = at76_mac80211_stop,
@@ -2250,6 +2253,7 @@ static int at76_init_new_device(struct at76_priv *priv,
 
 	/* mac80211 initialisation */
 	priv->hw->wiphy->max_scan_ssids = 1;
+	priv->hw->wiphy->max_scan_ie_len = 0;
 	priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band;
 	priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
@@ -2311,8 +2315,7 @@ static void at76_delete_device(struct at76_priv *priv)
 
 	del_timer_sync(&ledtrig_tx_timer);
 
-	if (priv->rx_skb)
-		kfree_skb(priv->rx_skb);
+	kfree_skb(priv->rx_skb);
 
 	usb_put_dev(priv->udev);
 
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
new file mode 100644
index 00000000000..d26e7b48531
--- /dev/null
+++ b/drivers/net/wireless/ath/Kconfig
@@ -0,0 +1,8 @@
+config ATH_COMMON
+	tristate "Atheros Wireless Cards"
+	depends on ATH5K || ATH9K || AR9170_USB
+
+source "drivers/net/wireless/ath/ath5k/Kconfig"
+source "drivers/net/wireless/ath/ath9k/Kconfig"
+source "drivers/net/wireless/ath/ar9170/Kconfig"
+
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
new file mode 100644
index 00000000000..4bb0132ada3
--- /dev/null
+++ b/drivers/net/wireless/ath/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_ATH5K)		+= ath5k/
+obj-$(CONFIG_ATH9K)		+= ath9k/
+obj-$(CONFIG_AR9170_USB)        += ar9170/
+
+obj-$(CONFIG_ATH_COMMON)	+= ath.o
+ath-objs 		:= main.o regd.o
diff --git a/drivers/net/wireless/ar9170/Kconfig b/drivers/net/wireless/ath/ar9170/Kconfig
index de4281fda12..b99e3263ee6 100644
--- a/drivers/net/wireless/ar9170/Kconfig
+++ b/drivers/net/wireless/ath/ar9170/Kconfig
@@ -2,6 +2,7 @@ config AR9170_USB
 	tristate "Atheros AR9170 802.11n USB support"
 	depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL
 	select FW_LOADER
+	select ATH_COMMON
 	help
 	  This is a driver for the Atheros "otus" 802.11n USB devices.
 
diff --git a/drivers/net/wireless/ar9170/Makefile b/drivers/net/wireless/ath/ar9170/Makefile
index 8d91c7ee321..8d91c7ee321 100644
--- a/drivers/net/wireless/ar9170/Makefile
+++ b/drivers/net/wireless/ath/ar9170/Makefile
diff --git a/drivers/net/wireless/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index f4fb2e94aea..bb97981fb24 100644
--- a/drivers/net/wireless/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -40,7 +40,7 @@
 
 #include <linux/completion.h>
 #include <linux/spinlock.h>
-#include <net/wireless.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #ifdef CONFIG_AR9170_LEDS
 #include <linux/leds.h>
@@ -48,6 +48,8 @@
 #include "eeprom.h"
 #include "hw.h"
 
+#include "../regd.h"
+
 #define PAYLOAD_MAX	(AR9170_MAX_CMD_LEN/4 - 1)
 
 enum ar9170_bw {
@@ -58,6 +60,21 @@ enum ar9170_bw {
 	__AR9170_NUM_BW,
 };
 
+static inline enum ar9170_bw nl80211_to_ar9170(enum nl80211_channel_type type)
+{
+	switch (type) {
+	case NL80211_CHAN_NO_HT:
+	case NL80211_CHAN_HT20:
+		return AR9170_BW_20;
+	case NL80211_CHAN_HT40MINUS:
+		return AR9170_BW_40_BELOW;
+	case NL80211_CHAN_HT40PLUS:
+		return AR9170_BW_40_ABOVE;
+	default:
+		BUG();
+	}
+}
+
 enum ar9170_rf_init_mode {
 	AR9170_RFI_NONE,
 	AR9170_RFI_WARM,
@@ -74,6 +91,7 @@ struct ar9170_led {
 	struct led_classdev l;
 	char name[32];
 	unsigned int toggled;
+	bool last_state;
 	bool registered;
 };
 
@@ -84,20 +102,31 @@ enum ar9170_device_state {
 	AR9170_STOPPED,
 	AR9170_IDLE,
 	AR9170_STARTED,
-	AR9170_ASSOCIATED,
 };
 
+struct ar9170_rxstream_mpdu_merge {
+	struct ar9170_rx_head plcp;
+	bool has_plcp;
+};
+
+#define AR9170_QUEUE_TIMEOUT		64
+#define AR9170_TX_TIMEOUT		8
+#define AR9170_JANITOR_DELAY		128
+#define AR9170_TX_INVALID_RATE		0xffffffff
+
 struct ar9170 {
 	struct ieee80211_hw *hw;
 	struct mutex mutex;
 	enum ar9170_device_state state;
+	unsigned long bad_hw_nagger;
 
 	int (*open)(struct ar9170 *);
 	void (*stop)(struct ar9170 *);
-	int (*tx)(struct ar9170 *, struct sk_buff *, bool, unsigned int);
+	int (*tx)(struct ar9170 *, struct sk_buff *);
 	int (*exec_cmd)(struct ar9170 *, enum ar9170_cmd, u32 ,
 			void *, u32 , void *);
 	void (*callback_cmd)(struct ar9170 *, u32 , void *);
+	int (*flush)(struct ar9170 *);
 
 	/* interface mode settings */
 	struct ieee80211_vif *vif;
@@ -117,7 +146,8 @@ struct ar9170 {
 	struct work_struct filter_config_work;
 	u64 cur_mc_hash, want_mc_hash;
 	u32 cur_filter, want_filter;
-	unsigned int filter_changed;
+	unsigned long filter_changed;
+	unsigned int filter_state;
 	bool sniffer_enabled;
 
 	/* PHY */
@@ -151,21 +181,35 @@ struct ar9170 {
 
 	/* EEPROM */
 	struct ar9170_eeprom eeprom;
+	struct ath_regulatory regulatory;
 
-	/* global tx status for unregistered Stations. */
-	struct sk_buff_head global_tx_status;
-	struct sk_buff_head global_tx_status_waste;
-	struct delayed_work tx_status_janitor;
+	/* tx queues - as seen by hw - */
+	struct sk_buff_head tx_pending[__AR9170_NUM_TXQ];
+	struct sk_buff_head tx_status[__AR9170_NUM_TXQ];
+	struct delayed_work tx_janitor;
+
+	/* rxstream mpdu merge */
+	struct ar9170_rxstream_mpdu_merge rx_mpdu;
+	struct sk_buff *rx_failover;
+	int rx_failover_missing;
 };
 
 struct ar9170_sta_info {
-	struct sk_buff_head tx_status[__AR9170_NUM_TXQ];
 };
 
-#define IS_STARTED(a)		(a->state >= AR9170_STARTED)
-#define IS_ACCEPTING_CMD(a)	(a->state >= AR9170_IDLE)
+#define AR9170_TX_FLAG_WAIT_FOR_ACK	BIT(0)
+#define AR9170_TX_FLAG_NO_ACK		BIT(1)
+#define AR9170_TX_FLAG_BLOCK_ACK	BIT(2)
+
+struct ar9170_tx_info {
+	unsigned long timeout;
+	unsigned int flags;
+};
+
+#define IS_STARTED(a)		(((struct ar9170 *)a)->state >= AR9170_STARTED)
+#define IS_ACCEPTING_CMD(a)	(((struct ar9170 *)a)->state >= AR9170_IDLE)
 
-#define AR9170_FILTER_CHANGED_PROMISC		BIT(0)
+#define AR9170_FILTER_CHANGED_MODE		BIT(0)
 #define AR9170_FILTER_CHANGED_MULTICAST		BIT(1)
 #define AR9170_FILTER_CHANGED_FRAMEFILTER	BIT(2)
 
@@ -174,8 +218,9 @@ void *ar9170_alloc(size_t priv_size);
 int ar9170_register(struct ar9170 *ar, struct device *pdev);
 void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb);
 void ar9170_unregister(struct ar9170 *ar);
-void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
-			     bool update_statistics, u16 tx_status);
+void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb);
+void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len);
+int ar9170_nag_limiter(struct ar9170 *ar);
 
 /* MAC */
 int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -185,6 +230,9 @@ int ar9170_update_multicast(struct ar9170 *ar);
 int ar9170_update_frame_filter(struct ar9170 *ar);
 int ar9170_set_operating_mode(struct ar9170 *ar);
 int ar9170_set_beacon_timers(struct ar9170 *ar);
+int ar9170_set_dyn_sifs_ack(struct ar9170 *ar);
+int ar9170_set_slot_time(struct ar9170 *ar);
+int ar9170_set_basic_rates(struct ar9170 *ar);
 int ar9170_set_hwretry_limit(struct ar9170 *ar, u32 max_retry);
 int ar9170_update_beacon(struct ar9170 *ar);
 void ar9170_new_beacon(struct work_struct *work);
diff --git a/drivers/net/wireless/ar9170/cmd.c b/drivers/net/wireless/ath/ar9170/cmd.c
index f57a6200167..f57a6200167 100644
--- a/drivers/net/wireless/ar9170/cmd.c
+++ b/drivers/net/wireless/ath/ar9170/cmd.c
diff --git a/drivers/net/wireless/ar9170/cmd.h b/drivers/net/wireless/ath/ar9170/cmd.h
index a4f0e50e52b..a4f0e50e52b 100644
--- a/drivers/net/wireless/ar9170/cmd.h
+++ b/drivers/net/wireless/ath/ar9170/cmd.h
diff --git a/drivers/net/wireless/ar9170/eeprom.h b/drivers/net/wireless/ath/ar9170/eeprom.h
index d2c8cc83f1d..d2c8cc83f1d 100644
--- a/drivers/net/wireless/ar9170/eeprom.h
+++ b/drivers/net/wireless/ath/ar9170/eeprom.h
diff --git a/drivers/net/wireless/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
index 53e250a4278..6cbfb2f8339 100644
--- a/drivers/net/wireless/ar9170/hw.h
+++ b/drivers/net/wireless/ath/ar9170/hw.h
@@ -207,6 +207,9 @@ enum ar9170_cmd {
 #define AR9170_MAC_REG_AC1_AC0_TXOP		(AR9170_MAC_REG_BASE + 0xB44)
 #define AR9170_MAC_REG_AC3_AC2_TXOP		(AR9170_MAC_REG_BASE + 0xB48)
 
+#define AR9170_MAC_REG_AMPDU_FACTOR		(AR9170_MAC_REG_BASE + 0xB9C)
+#define AR9170_MAC_REG_AMPDU_DENSITY		(AR9170_MAC_REG_BASE + 0xBA0)
+
 #define AR9170_MAC_REG_ACK_TABLE		(AR9170_MAC_REG_BASE + 0xC00)
 #define AR9170_MAC_REG_AMPDU_RX_THRESH		(AR9170_MAC_REG_BASE + 0xC50)
 
@@ -312,7 +315,7 @@ struct ar9170_rx_head {
 	u8 plcp[12];
 } __packed;
 
-struct ar9170_rx_tail {
+struct ar9170_rx_phystatus {
 	union {
 		struct {
 			u8 rssi_ant0, rssi_ant1, rssi_ant2,
@@ -324,6 +327,9 @@ struct ar9170_rx_tail {
 
 	u8 evm_stream0[6], evm_stream1[6];
 	u8 phy_err;
+} __packed;
+
+struct ar9170_rx_macstatus {
 	u8 SAidx, DAidx;
 	u8 error;
 	u8 status;
@@ -339,7 +345,7 @@ struct ar9170_rx_tail {
 
 #define AR9170_RX_ENC_SOFTWARE			0x8
 
-static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_tail *t)
+static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_macstatus *t)
 {
 	return (t->SAidx & 0xc0) >> 4 |
 	       (t->DAidx & 0xc0) >> 6;
@@ -357,10 +363,9 @@ static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_tail *t)
 
 #define AR9170_RX_STATUS_MPDU_MASK		0x30
 #define AR9170_RX_STATUS_MPDU_SINGLE		0x00
-#define AR9170_RX_STATUS_MPDU_FIRST		0x10
-#define AR9170_RX_STATUS_MPDU_MIDDLE		0x20
-#define AR9170_RX_STATUS_MPDU_LAST		0x30
-
+#define AR9170_RX_STATUS_MPDU_FIRST		0x20
+#define AR9170_RX_STATUS_MPDU_MIDDLE		0x30
+#define AR9170_RX_STATUS_MPDU_LAST		0x10
 
 #define AR9170_RX_ERROR_RXTO			0x01
 #define AR9170_RX_ERROR_OVERRUN			0x02
@@ -369,9 +374,9 @@ static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_tail *t)
 #define AR9170_RX_ERROR_WRONG_RA		0x10
 #define AR9170_RX_ERROR_PLCP			0x20
 #define AR9170_RX_ERROR_MMIC			0x40
+#define AR9170_RX_ERROR_FATAL			0x80
 
 struct ar9170_cmd_tx_status {
-	__le16 unkn;
 	u8 dst[ETH_ALEN];
 	__le32 rate;
 	__le16 status;
@@ -389,6 +394,7 @@ struct ar9170_cmd_ba_failed_count {
 struct ar9170_cmd_response {
 	u8 flag;
 	u8 type;
+	__le16 padding;
 
 	union {
 		struct ar9170_cmd_tx_status		tx_status;
@@ -414,4 +420,7 @@ enum ar9170_txq {
 	__AR9170_NUM_TXQ,
 };
 
+#define AR9170_TXQ_DEPTH	32
+#define AR9170_TX_MAX_PENDING	128
+
 #endif /* __AR9170_HW_H */
diff --git a/drivers/net/wireless/ar9170/led.c b/drivers/net/wireless/ath/ar9170/led.c
index 341cead7f60..63fda6cd210 100644
--- a/drivers/net/wireless/ar9170/led.c
+++ b/drivers/net/wireless/ath/ar9170/led.c
@@ -74,7 +74,7 @@ static void ar9170_update_leds(struct work_struct *work)
 
 	mutex_lock(&ar->mutex);
 	for (i = 0; i < AR9170_NUM_LEDS; i++)
-		if (ar->leds[i].toggled) {
+		if (ar->leds[i].registered && ar->leds[i].toggled) {
 			led_val |= 1 << i;
 
 			tmp = 70 + 200 / (ar->leds[i].toggled);
@@ -101,9 +101,15 @@ static void ar9170_led_brightness_set(struct led_classdev *led,
 	struct ar9170_led *arl = container_of(led, struct ar9170_led, l);
 	struct ar9170 *ar = arl->ar;
 
-	arl->toggled++;
+	if (unlikely(!arl->registered))
+		return ;
+
+	if (arl->last_state != !!brightness) {
+		arl->toggled++;
+		arl->last_state = !!brightness;
+	}
 
-	if (likely(IS_ACCEPTING_CMD(ar) && brightness))
+	if (likely(IS_ACCEPTING_CMD(ar) && arl->toggled))
 		queue_delayed_work(ar->hw->workqueue, &ar->led_work, HZ/10);
 }
 
@@ -136,13 +142,14 @@ void ar9170_unregister_leds(struct ar9170 *ar)
 {
 	int i;
 
-	cancel_delayed_work_sync(&ar->led_work);
-
 	for (i = 0; i < AR9170_NUM_LEDS; i++)
 		if (ar->leds[i].registered) {
 			led_classdev_unregister(&ar->leds[i].l);
 			ar->leds[i].registered = false;
+			ar->leds[i].toggled = 0;
 		}
+
+	cancel_delayed_work_sync(&ar->led_work);
 }
 
 int ar9170_register_leds(struct ar9170 *ar)
diff --git a/drivers/net/wireless/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index c8fa3073169..d9f1f46de18 100644
--- a/drivers/net/wireless/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -38,6 +38,55 @@
 #include "ar9170.h"
 #include "cmd.h"
 
+int ar9170_set_dyn_sifs_ack(struct ar9170 *ar)
+{
+	u32 val;
+
+	if (conf_is_ht40(&ar->hw->conf))
+		val = 0x010a;
+	else {
+		if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
+			val = 0x105;
+		else
+			val = 0x104;
+	}
+
+	return ar9170_write_reg(ar, AR9170_MAC_REG_DYNAMIC_SIFS_ACK, val);
+}
+
+int ar9170_set_slot_time(struct ar9170 *ar)
+{
+	u32 slottime = 20;
+
+	if (!ar->vif)
+		return 0;
+
+	if ((ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ) ||
+	    ar->vif->bss_conf.use_short_slot)
+		slottime = 9;
+
+	return ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME, slottime << 10);
+}
+
+int ar9170_set_basic_rates(struct ar9170 *ar)
+{
+	u8 cck, ofdm;
+
+	if (!ar->vif)
+		return 0;
+
+	ofdm = ar->vif->bss_conf.basic_rates >> 4;
+
+	/* FIXME: is still necessary? */
+	if (ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ)
+		cck = 0;
+	else
+		cck = ar->vif->bss_conf.basic_rates & 0xf;
+
+	return ar9170_write_reg(ar, AR9170_MAC_REG_BASIC_RATE,
+				ofdm << 8 | cck);
+}
+
 int ar9170_set_qos(struct ar9170 *ar)
 {
 	ar9170_regwrite_begin(ar);
@@ -72,6 +121,24 @@ int ar9170_set_qos(struct ar9170 *ar)
 	return ar9170_regwrite_result();
 }
 
+static int ar9170_set_ampdu_density(struct ar9170 *ar, u8 mpdudensity)
+{
+	u32 val;
+
+	/* don't allow AMPDU density > 8us */
+	if (mpdudensity > 6)
+		return -EINVAL;
+
+	/* Watch out! Otus uses slightly different density values. */
+	val = 0x140a00 | (mpdudensity ? (mpdudensity + 1) : 0);
+
+	ar9170_regwrite_begin(ar);
+	ar9170_regwrite(AR9170_MAC_REG_AMPDU_DENSITY, val);
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
 int ar9170_init_mac(struct ar9170 *ar)
 {
 	ar9170_regwrite_begin(ar);
@@ -265,9 +332,9 @@ int ar9170_set_operating_mode(struct ar9170 *ar)
 		case NL80211_IFTYPE_ADHOC:
 			pm_mode |= AR9170_MAC_REG_POWERMGT_IBSS;
 			break;
-/*		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_AP:
 			pm_mode |= AR9170_MAC_REG_POWERMGT_AP;
-			break;*/
+			break;
 		case NL80211_IFTYPE_WDS:
 			pm_mode |= AR9170_MAC_REG_POWERMGT_AP_WDS;
 			break;
@@ -296,6 +363,11 @@ int ar9170_set_operating_mode(struct ar9170 *ar)
 	if (err)
 		return err;
 
+	/* set AMPDU density to 8us. */
+	err = ar9170_set_ampdu_density(ar, 6);
+	if (err)
+		return err;
+
 	ar9170_regwrite_begin(ar);
 
 	ar9170_regwrite(AR9170_MAC_REG_POWERMANAGEMENT, pm_mode);
@@ -316,9 +388,9 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
 	u32 v = 0;
 	u32 pretbtt = 0;
 
-	v |= ar->hw->conf.beacon_int;
-
 	if (ar->vif) {
+		v |= ar->vif->bss_conf.beacon_int;
+
 		switch (ar->vif->type) {
 		case NL80211_IFTYPE_MESH_POINT:
 		case NL80211_IFTYPE_ADHOC:
@@ -326,7 +398,7 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
 			break;
 		case NL80211_IFTYPE_AP:
 			v |= BIT(24);
-			pretbtt = (ar->hw->conf.beacon_int - 6) << 16;
+			pretbtt = (ar->vif->bss_conf.beacon_int - 6) << 16;
 			break;
 		default:
 			break;
@@ -375,10 +447,10 @@ int ar9170_update_beacon(struct ar9170 *ar)
 	/* XXX: use skb->cb info */
 	if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
 		ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
-				((skb->len + 4) << (3+16)) + 0x0400);
+				((skb->len + 4) << (3 + 16)) + 0x0400);
 	else
 		ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
-				((skb->len + 4) << (3+16)) + 0x0400);
+				((skb->len + 4) << 16) + 0x001b);
 
 	ar9170_regwrite(AR9170_MAC_REG_BCN_LENGTH, skb->len + 4);
 	ar9170_regwrite(AR9170_MAC_REG_BCN_ADDR, AR9170_BEACON_BUFFER_ADDRESS);
diff --git a/drivers/net/wireless/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 5996ff9f7f4..9d38cf60a0d 100644
--- a/drivers/net/wireless/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -142,73 +142,153 @@ static struct ieee80211_channel ar9170_5ghz_chantable[] = {
 };
 #undef CHAN
 
+#define AR9170_HT_CAP							\
+{									\
+	.ht_supported	= true,						\
+	.cap		= IEEE80211_HT_CAP_MAX_AMSDU |			\
+			  IEEE80211_HT_CAP_SUP_WIDTH_20_40 |		\
+			  IEEE80211_HT_CAP_SGI_40 |			\
+			  IEEE80211_HT_CAP_DSSSCCK40 |			\
+			  IEEE80211_HT_CAP_SM_PS,			\
+	.ampdu_factor	= 3,						\
+	.ampdu_density	= 6,						\
+	.mcs		= {						\
+		.rx_mask = { 0xFF, 0xFF, 0, 0, 0, 0, 0, 0, 0, 0, },	\
+	},								\
+}
+
 static struct ieee80211_supported_band ar9170_band_2GHz = {
 	.channels	= ar9170_2ghz_chantable,
 	.n_channels	= ARRAY_SIZE(ar9170_2ghz_chantable),
 	.bitrates	= ar9170_g_ratetable,
 	.n_bitrates	= ar9170_g_ratetable_size,
+	.ht_cap		= AR9170_HT_CAP,
 };
 
-#ifdef AR9170_QUEUE_DEBUG
-/*
- * In case some wants works with AR9170's crazy tx_status queueing techniques.
- * He might need this rather useful probing function.
- *
- * NOTE: caller must hold the queue's spinlock!
- */
+static struct ieee80211_supported_band ar9170_band_5GHz = {
+	.channels	= ar9170_5ghz_chantable,
+	.n_channels	= ARRAY_SIZE(ar9170_5ghz_chantable),
+	.bitrates	= ar9170_a_ratetable,
+	.n_bitrates	= ar9170_a_ratetable_size,
+	.ht_cap		= AR9170_HT_CAP,
+};
 
+static void ar9170_tx(struct ar9170 *ar);
+
+#ifdef AR9170_QUEUE_DEBUG
 static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb)
 {
 	struct ar9170_tx_control *txc = (void *) skb->data;
-	struct ieee80211_hdr *hdr = (void *)txc->frame_data;
+	struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
+	struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data;
+	struct ieee80211_hdr *hdr = (void *) txc->frame_data;
 
-	printk(KERN_DEBUG "%s: => FRAME [skb:%p, queue:%d, DA:[%pM] "
-			  "mac_control:%04x, phy_control:%08x]\n",
+	printk(KERN_DEBUG "%s: => FRAME [skb:%p, q:%d, DA:[%pM] flags:%x "
+			  "mac_ctrl:%04x, phy_ctrl:%08x, timeout:[%d ms]]\n",
 	       wiphy_name(ar->hw->wiphy), skb, skb_get_queue_mapping(skb),
-	       ieee80211_get_DA(hdr), le16_to_cpu(txc->mac_control),
-	       le32_to_cpu(txc->phy_control));
+	       ieee80211_get_DA(hdr), arinfo->flags,
+	       le16_to_cpu(txc->mac_control), le32_to_cpu(txc->phy_control),
+	       jiffies_to_msecs(arinfo->timeout - jiffies));
 }
 
-static void ar9170_dump_station_tx_status_queue(struct ar9170 *ar,
-						struct sk_buff_head *queue)
+static void __ar9170_dump_txqueue(struct ar9170 *ar,
+				struct sk_buff_head *queue)
 {
 	struct sk_buff *skb;
 	int i = 0;
 
 	printk(KERN_DEBUG "---[ cut here ]---\n");
-	printk(KERN_DEBUG "%s: %d entries in tx_status queue.\n",
+	printk(KERN_DEBUG "%s: %d entries in queue.\n",
 	       wiphy_name(ar->hw->wiphy), skb_queue_len(queue));
 
 	skb_queue_walk(queue, skb) {
-		struct ar9170_tx_control *txc = (void *) skb->data;
-		struct ieee80211_hdr *hdr = (void *)txc->frame_data;
-
-		printk(KERN_DEBUG "index:%d => \n", i);
+		printk(KERN_DEBUG "index:%d => \n", i++);
 		ar9170_print_txheader(ar, skb);
 	}
+	if (i != skb_queue_len(queue))
+		printk(KERN_DEBUG "WARNING: queue frame counter "
+		       "mismatch %d != %d\n", skb_queue_len(queue), i);
 	printk(KERN_DEBUG "---[ end ]---\n");
 }
-#endif /* AR9170_QUEUE_DEBUG */
 
-static struct ieee80211_supported_band ar9170_band_5GHz = {
-	.channels	= ar9170_5ghz_chantable,
-	.n_channels	= ARRAY_SIZE(ar9170_5ghz_chantable),
-	.bitrates	= ar9170_a_ratetable,
-	.n_bitrates	= ar9170_a_ratetable_size,
-};
+static void ar9170_dump_txqueue(struct ar9170 *ar,
+				struct sk_buff_head *queue)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->lock, flags);
+	__ar9170_dump_txqueue(ar, queue);
+	spin_unlock_irqrestore(&queue->lock, flags);
+}
 
-void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
-			     bool valid_status, u16 tx_status)
+static void __ar9170_dump_txstats(struct ar9170 *ar)
+{
+	int i;
+
+	printk(KERN_DEBUG "%s: QoS queue stats\n",
+	       wiphy_name(ar->hw->wiphy));
+
+	for (i = 0; i < __AR9170_NUM_TXQ; i++)
+		printk(KERN_DEBUG "%s: queue:%d limit:%d len:%d waitack:%d\n",
+		       wiphy_name(ar->hw->wiphy), i, ar->tx_stats[i].limit,
+		       ar->tx_stats[i].len, skb_queue_len(&ar->tx_status[i]));
+}
+
+static void ar9170_dump_txstats(struct ar9170 *ar)
 {
-	struct ieee80211_tx_info *txinfo;
-	unsigned int retries = 0, queue = skb_get_queue_mapping(skb);
 	unsigned long flags;
 
 	spin_lock_irqsave(&ar->tx_stats_lock, flags);
-	ar->tx_stats[queue].len--;
-	if (ieee80211_queue_stopped(ar->hw, queue))
-		ieee80211_wake_queue(ar->hw, queue);
+	__ar9170_dump_txstats(ar);
 	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+}
+#endif /* AR9170_QUEUE_DEBUG */
+
+/* caller must guarantee exclusive access for _bin_ queue. */
+static void ar9170_recycle_expired(struct ar9170 *ar,
+				   struct sk_buff_head *queue,
+				   struct sk_buff_head *bin)
+{
+	struct sk_buff *skb, *old = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->lock, flags);
+	while ((skb = skb_peek(queue))) {
+		struct ieee80211_tx_info *txinfo;
+		struct ar9170_tx_info *arinfo;
+
+		txinfo = IEEE80211_SKB_CB(skb);
+		arinfo = (void *) txinfo->rate_driver_data;
+
+		if (time_is_before_jiffies(arinfo->timeout)) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: [%ld > %ld] frame expired => "
+			       "recycle \n", wiphy_name(ar->hw->wiphy),
+			       jiffies, arinfo->timeout);
+			ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+			__skb_unlink(skb, queue);
+			__skb_queue_tail(bin, skb);
+		} else {
+			break;
+		}
+
+		if (unlikely(old == skb)) {
+			/* bail out - queue is shot. */
+
+			WARN_ON(1);
+			break;
+		}
+		old = skb;
+	}
+	spin_unlock_irqrestore(&queue->lock, flags);
+}
+
+static void ar9170_tx_status(struct ar9170 *ar, struct sk_buff *skb,
+				    u16 tx_status)
+{
+	struct ieee80211_tx_info *txinfo;
+	unsigned int retries = 0;
 
 	txinfo = IEEE80211_SKB_CB(skb);
 	ieee80211_tx_info_clear_status(txinfo);
@@ -230,45 +310,61 @@ void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb,
 		break;
 	}
 
-	if (valid_status)
-		txinfo->status.rates[0].count = retries + 1;
-
+	txinfo->status.rates[0].count = retries + 1;
 	skb_pull(skb, sizeof(struct ar9170_tx_control));
 	ieee80211_tx_status_irqsafe(ar->hw, skb);
 }
 
-static struct sk_buff *ar9170_find_skb_in_queue(struct ar9170 *ar,
-						const u8 *mac,
-						const u32 queue,
-						struct sk_buff_head *q)
+void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
 {
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ar9170_tx_info *arinfo = (void *) info->rate_driver_data;
+	unsigned int queue = skb_get_queue_mapping(skb);
 	unsigned long flags;
-	struct sk_buff *skb;
 
-	spin_lock_irqsave(&q->lock, flags);
-	skb_queue_walk(q, skb) {
-		struct ar9170_tx_control *txc = (void *) skb->data;
-		struct ieee80211_hdr *hdr = (void *) txc->frame_data;
-		u32 txc_queue = (le32_to_cpu(txc->phy_control) &
-				AR9170_TX_PHY_QOS_MASK) >>
-				AR9170_TX_PHY_QOS_SHIFT;
+	spin_lock_irqsave(&ar->tx_stats_lock, flags);
+	ar->tx_stats[queue].len--;
 
-		if  ((queue != txc_queue) ||
-		     (compare_ether_addr(ieee80211_get_DA(hdr), mac)))
-			continue;
+	if (skb_queue_empty(&ar->tx_pending[queue])) {
+#ifdef AR9170_QUEUE_STOP_DEBUG
+		printk(KERN_DEBUG "%s: wake queue %d\n",
+		       wiphy_name(ar->hw->wiphy), queue);
+		__ar9170_dump_txstats(ar);
+#endif /* AR9170_QUEUE_STOP_DEBUG */
+		ieee80211_wake_queue(ar->hw, queue);
+	}
+	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
 
-		__skb_unlink(skb, q);
-		spin_unlock_irqrestore(&q->lock, flags);
-		return skb;
+	if (arinfo->flags & AR9170_TX_FLAG_BLOCK_ACK) {
+		dev_kfree_skb_any(skb);
+	} else if (arinfo->flags & AR9170_TX_FLAG_WAIT_FOR_ACK) {
+		arinfo->timeout = jiffies +
+				  msecs_to_jiffies(AR9170_TX_TIMEOUT);
+
+		skb_queue_tail(&ar->tx_status[queue], skb);
+	} else if (arinfo->flags & AR9170_TX_FLAG_NO_ACK) {
+		ar9170_tx_status(ar, skb, AR9170_TX_STATUS_FAILED);
+	} else {
+#ifdef AR9170_QUEUE_DEBUG
+		printk(KERN_DEBUG "%s: unsupported frame flags!\n",
+		       wiphy_name(ar->hw->wiphy));
+		ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+		dev_kfree_skb_any(skb);
+	}
+
+	if (!ar->tx_stats[queue].len &&
+	    !skb_queue_empty(&ar->tx_pending[queue])) {
+		ar9170_tx(ar);
 	}
-	spin_unlock_irqrestore(&q->lock, flags);
-	return NULL;
 }
 
-static struct sk_buff *ar9170_find_queued_skb(struct ar9170 *ar, const u8 *mac,
-					      const u32 queue)
+static struct sk_buff *ar9170_get_queued_skb(struct ar9170 *ar,
+					     const u8 *mac,
+					     struct sk_buff_head *queue,
+					     const u32 rate)
 {
-	struct ieee80211_sta *sta;
+	unsigned long flags;
 	struct sk_buff *skb;
 
 	/*
@@ -279,85 +375,94 @@ static struct sk_buff *ar9170_find_queued_skb(struct ar9170 *ar, const u8 *mac,
 	 * the firmware provided (-> destination MAC, and phy_control) -
 	 * and hope that we picked the right one...
 	 */
-	rcu_read_lock();
-	sta = ieee80211_find_sta(ar->hw, mac);
-
-	if (likely(sta)) {
-		struct ar9170_sta_info *sta_priv = (void *) sta->drv_priv;
-		skb = skb_dequeue(&sta_priv->tx_status[queue]);
-		rcu_read_unlock();
-		if (likely(skb))
-			return skb;
-	} else
-		rcu_read_unlock();
-
-	/* scan the waste queue for candidates */
-	skb = ar9170_find_skb_in_queue(ar, mac, queue,
-				       &ar->global_tx_status_waste);
-	if (!skb) {
-		/* so it still _must_ be in the global list. */
-		skb = ar9170_find_skb_in_queue(ar, mac, queue,
-					       &ar->global_tx_status);
-	}
 
+	spin_lock_irqsave(&queue->lock, flags);
+	skb_queue_walk(queue, skb) {
+		struct ar9170_tx_control *txc = (void *) skb->data;
+		struct ieee80211_hdr *hdr = (void *) txc->frame_data;
+		u32 r;
+
+		if (mac && compare_ether_addr(ieee80211_get_DA(hdr), mac)) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: skip frame => DA %pM != %pM\n",
+			       wiphy_name(ar->hw->wiphy), mac,
+			       ieee80211_get_DA(hdr));
+			ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+			continue;
+		}
+
+		r = (le32_to_cpu(txc->phy_control) & AR9170_TX_PHY_MCS_MASK) >>
+		    AR9170_TX_PHY_MCS_SHIFT;
+
+		if ((rate != AR9170_TX_INVALID_RATE) && (r != rate)) {
 #ifdef AR9170_QUEUE_DEBUG
-	if (unlikely((!skb) && net_ratelimit())) {
-		printk(KERN_ERR "%s: ESS:[%pM] does not have any "
-				"outstanding frames in this queue (%d).\n",
-				wiphy_name(ar->hw->wiphy), mac, queue);
+			printk(KERN_DEBUG "%s: skip frame => rate %d != %d\n",
+			       wiphy_name(ar->hw->wiphy), rate, r);
+			ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+			continue;
+		}
+
+		__skb_unlink(skb, queue);
+		spin_unlock_irqrestore(&queue->lock, flags);
+		return skb;
 	}
+
+#ifdef AR9170_QUEUE_DEBUG
+	printk(KERN_ERR "%s: ESS:[%pM] does not have any "
+			"outstanding frames in queue.\n",
+			wiphy_name(ar->hw->wiphy), mac);
+	__ar9170_dump_txqueue(ar, queue);
 #endif /* AR9170_QUEUE_DEBUG */
-	return skb;
+	spin_unlock_irqrestore(&queue->lock, flags);
+
+	return NULL;
 }
 
 /*
- * This worker tries to keep the global tx_status queue empty.
- * So we can guarantee that incoming tx_status reports for
- * unregistered stations are always synced with the actual
- * frame - which we think - belongs to.
+ * This worker tries to keeps an maintain tx_status queues.
+ * So we can guarantee that incoming tx_status reports are
+ * actually for a pending frame.
  */
 
-static void ar9170_tx_status_janitor(struct work_struct *work)
+static void ar9170_tx_janitor(struct work_struct *work)
 {
 	struct ar9170 *ar = container_of(work, struct ar9170,
-					 tx_status_janitor.work);
-	struct sk_buff *skb;
+					 tx_janitor.work);
+	struct sk_buff_head waste;
+	unsigned int i;
+	bool resched = false;
 
 	if (unlikely(!IS_STARTED(ar)))
 		return ;
 
-	mutex_lock(&ar->mutex);
-	/* recycle the garbage back to mac80211... one by one. */
-	while ((skb = skb_dequeue(&ar->global_tx_status_waste))) {
+	skb_queue_head_init(&waste);
+
+	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
 #ifdef AR9170_QUEUE_DEBUG
-		printk(KERN_DEBUG "%s: dispose queued frame =>\n",
-		       wiphy_name(ar->hw->wiphy));
-		ar9170_print_txheader(ar, skb);
+		printk(KERN_DEBUG "%s: garbage collector scans queue:%d\n",
+		       wiphy_name(ar->hw->wiphy), i);
+		ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
+		ar9170_dump_txqueue(ar, &ar->tx_status[i]);
 #endif /* AR9170_QUEUE_DEBUG */
-		ar9170_handle_tx_status(ar, skb, false,
-					AR9170_TX_STATUS_FAILED);
-	}
 
-	while ((skb = skb_dequeue(&ar->global_tx_status))) {
-#ifdef AR9170_QUEUE_DEBUG
-		printk(KERN_DEBUG "%s: moving frame into waste queue =>\n",
-		       wiphy_name(ar->hw->wiphy));
+		ar9170_recycle_expired(ar, &ar->tx_status[i], &waste);
+		ar9170_recycle_expired(ar, &ar->tx_pending[i], &waste);
+		skb_queue_purge(&waste);
 
-		ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
-		skb_queue_tail(&ar->global_tx_status_waste, skb);
+		if (!skb_queue_empty(&ar->tx_status[i]) ||
+		    !skb_queue_empty(&ar->tx_pending[i]))
+			resched = true;
 	}
 
-	/* recall the janitor in 100ms - if there's garbage in the can. */
-	if (skb_queue_len(&ar->global_tx_status_waste) > 0)
-		queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor,
-				   msecs_to_jiffies(100));
-
-	mutex_unlock(&ar->mutex);
+	if (resched)
+		queue_delayed_work(ar->hw->workqueue,
+				   &ar->tx_janitor,
+				   msecs_to_jiffies(AR9170_JANITOR_DELAY));
 }
 
-static void ar9170_handle_command_response(struct ar9170 *ar,
-					   void *buf, u32 len)
+void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
 {
 	struct ar9170_cmd_response *cmd = (void *) buf;
 
@@ -381,15 +486,21 @@ static void ar9170_handle_command_response(struct ar9170 *ar,
 		 */
 
 		struct sk_buff *skb;
-		u32 queue = (le32_to_cpu(cmd->tx_status.rate) &
-			    AR9170_TX_PHY_QOS_MASK) >> AR9170_TX_PHY_QOS_SHIFT;
+		u32 phy = le32_to_cpu(cmd->tx_status.rate);
+		u32 q = (phy & AR9170_TX_PHY_QOS_MASK) >>
+			AR9170_TX_PHY_QOS_SHIFT;
+#ifdef AR9170_QUEUE_DEBUG
+		printk(KERN_DEBUG "%s: recv tx_status for %pM, p:%08x, q:%d\n",
+		       wiphy_name(ar->hw->wiphy), cmd->tx_status.dst, phy, q);
+#endif /* AR9170_QUEUE_DEBUG */
 
-		skb = ar9170_find_queued_skb(ar, cmd->tx_status.dst, queue);
+		skb = ar9170_get_queued_skb(ar, cmd->tx_status.dst,
+					    &ar->tx_status[q],
+					    AR9170_TX_INVALID_RATE);
 		if (unlikely(!skb))
 			return ;
 
-		ar9170_handle_tx_status(ar, skb, true,
-					le16_to_cpu(cmd->tx_status.status));
+		ar9170_tx_status(ar, skb, le16_to_cpu(cmd->tx_status.status));
 		break;
 		}
 
@@ -429,6 +540,38 @@ static void ar9170_handle_command_response(struct ar9170 *ar,
 		/* retransmission issue / SIFS/EIFS collision ?! */
 		break;
 
+	/* firmware debug */
+	case 0xca:
+		printk(KERN_DEBUG "ar9170 FW: %.*s\n", len - 4, (char *)buf + 4);
+		break;
+	case 0xcb:
+		len -= 4;
+
+		switch (len) {
+		case 1:
+			printk(KERN_DEBUG "ar9170 FW: u8: %#.2x\n",
+				*((char *)buf + 4));
+			break;
+		case 2:
+			printk(KERN_DEBUG "ar9170 FW: u8: %#.4x\n",
+				le16_to_cpup((__le16 *)((char *)buf + 4)));
+			break;
+		case 4:
+			printk(KERN_DEBUG "ar9170 FW: u8: %#.8x\n",
+				le32_to_cpup((__le32 *)((char *)buf + 4)));
+			break;
+		case 8:
+			printk(KERN_DEBUG "ar9170 FW: u8: %#.16lx\n",
+				(unsigned long)le64_to_cpup(
+						(__le64 *)((char *)buf + 4)));
+			break;
+		}
+		break;
+	case 0xcc:
+		print_hex_dump_bytes("ar9170 FW:", DUMP_PREFIX_NONE,
+				     (char *)buf + 4, len - 4);
+		break;
+
 	default:
 		printk(KERN_INFO "received unhandled event %x\n", cmd->type);
 		print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len);
@@ -436,214 +579,430 @@ static void ar9170_handle_command_response(struct ar9170 *ar,
 	}
 }
 
-/*
- * If the frame alignment is right (or the kernel has
- * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there
- * is only a single MPDU in the USB frame, then we can
- * submit to mac80211 the SKB directly. However, since
- * there may be multiple packets in one SKB in stream
- * mode, and we need to observe the proper ordering,
- * this is non-trivial.
- */
-static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len)
+static void ar9170_rx_reset_rx_mpdu(struct ar9170 *ar)
 {
-	struct sk_buff *skb;
-	struct ar9170_rx_head *head = (void *)buf;
-	struct ar9170_rx_tail *tail;
-	struct ieee80211_rx_status status;
-	int mpdu_len, i;
-	u8 error, antennas = 0, decrypt;
-	__le16 fc;
-	int reserved;
+	memset(&ar->rx_mpdu.plcp, 0, sizeof(struct ar9170_rx_head));
+	ar->rx_mpdu.has_plcp = false;
+}
 
-	if (unlikely(!IS_STARTED(ar)))
-		return ;
+int ar9170_nag_limiter(struct ar9170 *ar)
+{
+	bool print_message;
+
+	/*
+	 * we expect all sorts of errors in promiscuous mode.
+	 * don't bother with it, it's OK!
+	 */
+	if (ar->sniffer_enabled)
+		return false;
+
+	/*
+	 * only go for frequent errors! The hardware tends to
+	 * do some stupid thing once in a while under load, in
+	 * noisy environments or just for fun!
+	 */
+	if (time_before(jiffies, ar->bad_hw_nagger) && net_ratelimit())
+		print_message = true;
+	else
+		print_message = false;
+
+	/* reset threshold for "once in a while" */
+	ar->bad_hw_nagger = jiffies + HZ / 4;
+	return print_message;
+}
+
+static int ar9170_rx_mac_status(struct ar9170 *ar,
+				struct ar9170_rx_head *head,
+				struct ar9170_rx_macstatus *mac,
+				struct ieee80211_rx_status *status)
+{
+	u8 error, decrypt;
 
-	/* Received MPDU */
-	mpdu_len = len;
-	mpdu_len -= sizeof(struct ar9170_rx_head);
-	mpdu_len -= sizeof(struct ar9170_rx_tail);
 	BUILD_BUG_ON(sizeof(struct ar9170_rx_head) != 12);
-	BUILD_BUG_ON(sizeof(struct ar9170_rx_tail) != 24);
+	BUILD_BUG_ON(sizeof(struct ar9170_rx_macstatus) != 4);
 
-	if (mpdu_len <= FCS_LEN)
-		return;
+	error = mac->error;
+	if (error & AR9170_RX_ERROR_MMIC) {
+		status->flag |= RX_FLAG_MMIC_ERROR;
+		error &= ~AR9170_RX_ERROR_MMIC;
+	}
 
-	tail = (void *)(buf + sizeof(struct ar9170_rx_head) + mpdu_len);
+	if (error & AR9170_RX_ERROR_PLCP) {
+		status->flag |= RX_FLAG_FAILED_PLCP_CRC;
+		error &= ~AR9170_RX_ERROR_PLCP;
 
-	for (i = 0; i < 3; i++)
-		if (tail->rssi[i] != 0x80)
-			antennas |= BIT(i);
+		if (!(ar->filter_state & FIF_PLCPFAIL))
+			return -EINVAL;
+	}
 
-	/* post-process RSSI */
-	for (i = 0; i < 7; i++)
-		if (tail->rssi[i] & 0x80)
-			tail->rssi[i] = ((tail->rssi[i] & 0x7f) + 1) & 0x7f;
+	if (error & AR9170_RX_ERROR_FCS) {
+		status->flag |= RX_FLAG_FAILED_FCS_CRC;
+		error &= ~AR9170_RX_ERROR_FCS;
 
-	memset(&status, 0, sizeof(status));
+		if (!(ar->filter_state & FIF_FCSFAIL))
+			return -EINVAL;
+	}
+
+	decrypt = ar9170_get_decrypt_type(mac);
+	if (!(decrypt & AR9170_RX_ENC_SOFTWARE) &&
+	    decrypt != AR9170_ENC_ALG_NONE)
+		status->flag |= RX_FLAG_DECRYPTED;
+
+	/* ignore wrong RA errors */
+	error &= ~AR9170_RX_ERROR_WRONG_RA;
+
+	if (error & AR9170_RX_ERROR_DECRYPT) {
+		error &= ~AR9170_RX_ERROR_DECRYPT;
+		/*
+		 * Rx decryption is done in place,
+		 * the original data is lost anyway.
+		 */
+
+		return -EINVAL;
+	}
+
+	/* drop any other error frames */
+	if (unlikely(error)) {
+		/* TODO: update netdevice's RX dropped/errors statistics */
+
+		if (ar9170_nag_limiter(ar))
+			printk(KERN_DEBUG "%s: received frame with "
+			       "suspicious error code (%#x).\n",
+			       wiphy_name(ar->hw->wiphy), error);
+
+		return -EINVAL;
+	}
 
-	status.band = ar->channel->band;
-	status.freq = ar->channel->center_freq;
-	status.signal = ar->noise[0] + tail->rssi_combined;
-	status.noise = ar->noise[0];
-	status.antenna = antennas;
+	status->band = ar->channel->band;
+	status->freq = ar->channel->center_freq;
 
-	switch (tail->status & AR9170_RX_STATUS_MODULATION_MASK) {
+	switch (mac->status & AR9170_RX_STATUS_MODULATION_MASK) {
 	case AR9170_RX_STATUS_MODULATION_CCK:
-		if (tail->status & AR9170_RX_STATUS_SHORT_PREAMBLE)
-			status.flag |= RX_FLAG_SHORTPRE;
+		if (mac->status & AR9170_RX_STATUS_SHORT_PREAMBLE)
+			status->flag |= RX_FLAG_SHORTPRE;
 		switch (head->plcp[0]) {
 		case 0x0a:
-			status.rate_idx = 0;
+			status->rate_idx = 0;
 			break;
 		case 0x14:
-			status.rate_idx = 1;
+			status->rate_idx = 1;
 			break;
 		case 0x37:
-			status.rate_idx = 2;
+			status->rate_idx = 2;
 			break;
 		case 0x6e:
-			status.rate_idx = 3;
+			status->rate_idx = 3;
 			break;
 		default:
-			if ((!ar->sniffer_enabled) && (net_ratelimit()))
+			if (ar9170_nag_limiter(ar))
 				printk(KERN_ERR "%s: invalid plcp cck rate "
 				       "(%x).\n", wiphy_name(ar->hw->wiphy),
 				       head->plcp[0]);
-			return;
+			return -EINVAL;
 		}
 		break;
+
 	case AR9170_RX_STATUS_MODULATION_OFDM:
-		switch (head->plcp[0] & 0xF) {
-		case 0xB:
-			status.rate_idx = 0;
+		switch (head->plcp[0] & 0xf) {
+		case 0xb:
+			status->rate_idx = 0;
 			break;
-		case 0xF:
-			status.rate_idx = 1;
+		case 0xf:
+			status->rate_idx = 1;
 			break;
-		case 0xA:
-			status.rate_idx = 2;
+		case 0xa:
+			status->rate_idx = 2;
 			break;
-		case 0xE:
-			status.rate_idx = 3;
+		case 0xe:
+			status->rate_idx = 3;
 			break;
 		case 0x9:
-			status.rate_idx = 4;
+			status->rate_idx = 4;
 			break;
-		case 0xD:
-			status.rate_idx = 5;
+		case 0xd:
+			status->rate_idx = 5;
 			break;
 		case 0x8:
-			status.rate_idx = 6;
+			status->rate_idx = 6;
 			break;
-		case 0xC:
-			status.rate_idx = 7;
+		case 0xc:
+			status->rate_idx = 7;
 			break;
 		default:
-			if ((!ar->sniffer_enabled) && (net_ratelimit()))
+			if (ar9170_nag_limiter(ar))
 				printk(KERN_ERR "%s: invalid plcp ofdm rate "
 				       "(%x).\n", wiphy_name(ar->hw->wiphy),
 				       head->plcp[0]);
-			return;
+			return -EINVAL;
 		}
-		if (status.band == IEEE80211_BAND_2GHZ)
-			status.rate_idx += 4;
+		if (status->band == IEEE80211_BAND_2GHZ)
+			status->rate_idx += 4;
 		break;
+
 	case AR9170_RX_STATUS_MODULATION_HT:
+		if (head->plcp[3] & 0x80)
+			status->flag |= RX_FLAG_40MHZ;
+		if (head->plcp[6] & 0x80)
+			status->flag |= RX_FLAG_SHORT_GI;
+
+		status->rate_idx = clamp(0, 75, head->plcp[6] & 0x7f);
+		status->flag |= RX_FLAG_HT;
+		break;
+
 	case AR9170_RX_STATUS_MODULATION_DUPOFDM:
 		/* XXX */
-
-		if (net_ratelimit())
+		if (ar9170_nag_limiter(ar))
 			printk(KERN_ERR "%s: invalid modulation\n",
 			       wiphy_name(ar->hw->wiphy));
-		return;
+		return -EINVAL;
 	}
 
-	error = tail->error;
+	return 0;
+}
+
+static void ar9170_rx_phy_status(struct ar9170 *ar,
+				 struct ar9170_rx_phystatus *phy,
+				 struct ieee80211_rx_status *status)
+{
+	int i;
 
-	if (error & AR9170_RX_ERROR_MMIC) {
-		status.flag |= RX_FLAG_MMIC_ERROR;
-		error &= ~AR9170_RX_ERROR_MMIC;
-	}
+	BUILD_BUG_ON(sizeof(struct ar9170_rx_phystatus) != 20);
 
-	if (error & AR9170_RX_ERROR_PLCP) {
-		status.flag |= RX_FLAG_FAILED_PLCP_CRC;
-		error &= ~AR9170_RX_ERROR_PLCP;
+	for (i = 0; i < 3; i++)
+		if (phy->rssi[i] != 0x80)
+			status->antenna |= BIT(i);
+
+	/* post-process RSSI */
+	for (i = 0; i < 7; i++)
+		if (phy->rssi[i] & 0x80)
+			phy->rssi[i] = ((phy->rssi[i] & 0x7f) + 1) & 0x7f;
+
+	/* TODO: we could do something with phy_errors */
+	status->signal = ar->noise[0] + phy->rssi_combined;
+	status->noise = ar->noise[0];
+}
+
+static struct sk_buff *ar9170_rx_copy_data(u8 *buf, int len)
+{
+	struct sk_buff *skb;
+	int reserved = 0;
+	struct ieee80211_hdr *hdr = (void *) buf;
+
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		reserved += NET_IP_ALIGN;
+
+		if (*qc & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
+			reserved += NET_IP_ALIGN;
 	}
 
-	if (error & AR9170_RX_ERROR_FCS) {
-		status.flag |= RX_FLAG_FAILED_FCS_CRC;
-		error &= ~AR9170_RX_ERROR_FCS;
+	if (ieee80211_has_a4(hdr->frame_control))
+		reserved += NET_IP_ALIGN;
+
+	reserved = 32 + (reserved & NET_IP_ALIGN);
+
+	skb = dev_alloc_skb(len + reserved);
+	if (likely(skb)) {
+		skb_reserve(skb, reserved);
+		memcpy(skb_put(skb, len), buf, len);
 	}
 
-	decrypt = ar9170_get_decrypt_type(tail);
-	if (!(decrypt & AR9170_RX_ENC_SOFTWARE) &&
-	    decrypt != AR9170_ENC_ALG_NONE)
-		status.flag |= RX_FLAG_DECRYPTED;
+	return skb;
+}
 
-	/* ignore wrong RA errors */
-	error &= ~AR9170_RX_ERROR_WRONG_RA;
+/*
+ * If the frame alignment is right (or the kernel has
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there
+ * is only a single MPDU in the USB frame, then we could
+ * submit to mac80211 the SKB directly. However, since
+ * there may be multiple packets in one SKB in stream
+ * mode, and we need to observe the proper ordering,
+ * this is non-trivial.
+ */
 
-	if (error & AR9170_RX_ERROR_DECRYPT) {
-		error &= ~AR9170_RX_ERROR_DECRYPT;
+static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len)
+{
+	struct ar9170_rx_head *head;
+	struct ar9170_rx_macstatus *mac;
+	struct ar9170_rx_phystatus *phy = NULL;
+	struct ieee80211_rx_status status;
+	struct sk_buff *skb;
+	int mpdu_len;
+
+	if (unlikely(!IS_STARTED(ar) || len < (sizeof(*mac))))
+		return ;
+
+	/* Received MPDU */
+	mpdu_len = len - sizeof(*mac);
+
+	mac = (void *)(buf + mpdu_len);
+	if (unlikely(mac->error & AR9170_RX_ERROR_FATAL)) {
+		/* this frame is too damaged and can't be used - drop it */
 
-		/*
-		 * Rx decryption is done in place,
-		 * the original data is lost anyway.
-		 */
 		return ;
 	}
 
-	/* drop any other error frames */
-	if ((error) && (net_ratelimit())) {
-		printk(KERN_DEBUG "%s: errors: %#x\n",
-		       wiphy_name(ar->hw->wiphy), error);
-		return;
+	switch (mac->status & AR9170_RX_STATUS_MPDU_MASK) {
+	case AR9170_RX_STATUS_MPDU_FIRST:
+		/* first mpdu packet has the plcp header */
+		if (likely(mpdu_len >= sizeof(struct ar9170_rx_head))) {
+			head = (void *) buf;
+			memcpy(&ar->rx_mpdu.plcp, (void *) buf,
+			       sizeof(struct ar9170_rx_head));
+
+			mpdu_len -= sizeof(struct ar9170_rx_head);
+			buf += sizeof(struct ar9170_rx_head);
+			ar->rx_mpdu.has_plcp = true;
+		} else {
+			if (ar9170_nag_limiter(ar))
+				printk(KERN_ERR "%s: plcp info is clipped.\n",
+				       wiphy_name(ar->hw->wiphy));
+			return ;
+		}
+		break;
+
+	case AR9170_RX_STATUS_MPDU_LAST:
+		/* last mpdu has a extra tail with phy status information */
+
+		if (likely(mpdu_len >= sizeof(struct ar9170_rx_phystatus))) {
+			mpdu_len -= sizeof(struct ar9170_rx_phystatus);
+			phy = (void *)(buf + mpdu_len);
+		} else {
+			if (ar9170_nag_limiter(ar))
+				printk(KERN_ERR "%s: frame tail is clipped.\n",
+				       wiphy_name(ar->hw->wiphy));
+			return ;
+		}
+
+	case AR9170_RX_STATUS_MPDU_MIDDLE:
+		/* middle mpdus are just data */
+		if (unlikely(!ar->rx_mpdu.has_plcp)) {
+			if (!ar9170_nag_limiter(ar))
+				return ;
+
+			printk(KERN_ERR "%s: rx stream did not start "
+					"with a first_mpdu frame tag.\n",
+			       wiphy_name(ar->hw->wiphy));
+
+			return ;
+		}
+
+		head = &ar->rx_mpdu.plcp;
+		break;
+
+	case AR9170_RX_STATUS_MPDU_SINGLE:
+		/* single mpdu - has plcp (head) and phy status (tail) */
+		head = (void *) buf;
+
+		mpdu_len -= sizeof(struct ar9170_rx_head);
+		mpdu_len -= sizeof(struct ar9170_rx_phystatus);
+
+		buf += sizeof(struct ar9170_rx_head);
+		phy = (void *)(buf + mpdu_len);
+		break;
+
+	default:
+		BUG_ON(1);
+		break;
 	}
 
-	buf += sizeof(struct ar9170_rx_head);
-	fc = *(__le16 *)buf;
+	if (unlikely(mpdu_len < FCS_LEN))
+		return ;
 
-	if (ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc))
-		reserved = 32 + 2;
-	else
-		reserved = 32;
+	memset(&status, 0, sizeof(status));
+	if (unlikely(ar9170_rx_mac_status(ar, head, mac, &status)))
+		return ;
 
-	skb = dev_alloc_skb(mpdu_len + reserved);
-	if (!skb)
-		return;
+	if (phy)
+		ar9170_rx_phy_status(ar, phy, &status);
 
-	skb_reserve(skb, reserved);
-	memcpy(skb_put(skb, mpdu_len), buf, mpdu_len);
-	ieee80211_rx_irqsafe(ar->hw, skb, &status);
+	skb = ar9170_rx_copy_data(buf, mpdu_len);
+	if (likely(skb))
+		ieee80211_rx_irqsafe(ar->hw, skb, &status);
 }
 
 void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
 {
-	unsigned int i, tlen, resplen;
+	unsigned int i, tlen, resplen, wlen = 0, clen = 0;
 	u8 *tbuf, *respbuf;
 
 	tbuf = skb->data;
 	tlen = skb->len;
 
 	while (tlen >= 4) {
-		int clen = tbuf[1] << 8 | tbuf[0];
-		int wlen = (clen + 3) & ~3;
+		clen = tbuf[1] << 8 | tbuf[0];
+		wlen = ALIGN(clen, 4);
 
-		/*
-		 * parse stream (if any)
-		 */
+		/* check if this is stream has a valid tag.*/
 		if (tbuf[2] != 0 || tbuf[3] != 0x4e) {
-			printk(KERN_ERR "%s: missing tag!\n",
-			       wiphy_name(ar->hw->wiphy));
+			/*
+			 * TODO: handle the highly unlikely event that the
+			 * corrupted stream has the TAG at the right position.
+			 */
+
+			/* check if the frame can be repaired. */
+			if (!ar->rx_failover_missing) {
+				/* this is no "short read". */
+				if (ar9170_nag_limiter(ar)) {
+					printk(KERN_ERR "%s: missing tag!\n",
+					       wiphy_name(ar->hw->wiphy));
+					goto err_telluser;
+				} else
+					goto err_silent;
+			}
+
+			if (ar->rx_failover_missing > tlen) {
+				if (ar9170_nag_limiter(ar)) {
+					printk(KERN_ERR "%s: possible multi "
+					       "stream corruption!\n",
+					       wiphy_name(ar->hw->wiphy));
+					goto err_telluser;
+				} else
+					goto err_silent;
+			}
+
+			memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen);
+			ar->rx_failover_missing -= tlen;
+
+			if (ar->rx_failover_missing <= 0) {
+				/*
+				 * nested ar9170_rx call!
+				 * termination is guranteed, even when the
+				 * combined frame also have a element with
+				 * a bad tag.
+				 */
+
+				ar->rx_failover_missing = 0;
+				ar9170_rx(ar, ar->rx_failover);
+
+				skb_reset_tail_pointer(ar->rx_failover);
+				skb_trim(ar->rx_failover, 0);
+			}
+
 			return ;
 		}
+
+		/* check if stream is clipped */
 		if (wlen > tlen - 4) {
-			printk(KERN_ERR "%s: invalid RX (%d, %d, %d)\n",
-			       wiphy_name(ar->hw->wiphy), clen, wlen, tlen);
-			print_hex_dump(KERN_DEBUG, "data: ",
-				       DUMP_PREFIX_OFFSET,
-				       16, 1, tbuf, tlen, true);
+			if (ar->rx_failover_missing) {
+				/* TODO: handle double stream corruption. */
+				if (ar9170_nag_limiter(ar)) {
+					printk(KERN_ERR "%s: double rx stream "
+					       "corruption!\n",
+						wiphy_name(ar->hw->wiphy));
+					goto err_telluser;
+				} else
+					goto err_silent;
+			}
+
+			/*
+			 * save incomplete data set.
+			 * the firmware will resend the missing bits when
+			 * the rx - descriptor comes round again.
+			 */
+
+			memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen);
+			ar->rx_failover_missing = clen - tlen;
 			return ;
 		}
 		resplen = clen;
@@ -668,12 +1027,44 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
 		if (i == 12)
 			ar9170_handle_command_response(ar, respbuf, resplen);
 		else
-			ar9170_handle_mpdu(ar, respbuf, resplen);
+			ar9170_handle_mpdu(ar, respbuf, clen);
 	}
 
-	if (tlen)
-		printk(KERN_ERR "%s: buffer remains!\n",
-		       wiphy_name(ar->hw->wiphy));
+	if (tlen) {
+		if (net_ratelimit())
+			printk(KERN_ERR "%s: %d bytes of unprocessed "
+					"data left in rx stream!\n",
+			       wiphy_name(ar->hw->wiphy), tlen);
+
+		goto err_telluser;
+	}
+
+	return ;
+
+err_telluser:
+	printk(KERN_ERR "%s: damaged RX stream data [want:%d, "
+			"data:%d, rx:%d, pending:%d ]\n",
+	       wiphy_name(ar->hw->wiphy), clen, wlen, tlen,
+	       ar->rx_failover_missing);
+
+	if (ar->rx_failover_missing)
+		print_hex_dump_bytes("rxbuf:", DUMP_PREFIX_OFFSET,
+				     ar->rx_failover->data,
+				     ar->rx_failover->len);
+
+	print_hex_dump_bytes("stream:", DUMP_PREFIX_OFFSET,
+			     skb->data, skb->len);
+
+	printk(KERN_ERR "%s: please check your hardware and cables, if "
+			"you see this message frequently.\n",
+	       wiphy_name(ar->hw->wiphy));
+
+err_silent:
+	if (ar->rx_failover_missing) {
+		skb_reset_tail_pointer(ar->rx_failover);
+		skb_trim(ar->rx_failover, 0);
+		ar->rx_failover_missing = 0;
+	}
 }
 
 #define AR9170_FILL_QUEUE(queue, ai_fs, cwmin, cwmax, _txop)		\
@@ -691,10 +1082,12 @@ static int ar9170_op_start(struct ieee80211_hw *hw)
 
 	mutex_lock(&ar->mutex);
 
+	ar->filter_changed = 0;
+
 	/* reinitialize queues statistics */
 	memset(&ar->tx_stats, 0, sizeof(ar->tx_stats));
-	for (i = 0; i < ARRAY_SIZE(ar->tx_stats); i++)
-		ar->tx_stats[i].limit = 8;
+	for (i = 0; i < __AR9170_NUM_TXQ; i++)
+		ar->tx_stats[i].limit = AR9170_TXQ_DEPTH;
 
 	/* reset QoS defaults */
 	AR9170_FILL_QUEUE(ar->edcf[0], 3, 15, 1023,  0); /* BEST EFFORT*/
@@ -703,6 +1096,8 @@ static int ar9170_op_start(struct ieee80211_hw *hw)
 	AR9170_FILL_QUEUE(ar->edcf[3], 2, 3,     7, 47); /* VOICE */
 	AR9170_FILL_QUEUE(ar->edcf[4], 2, 3,     7,  0); /* SPECIAL */
 
+	ar->bad_hw_nagger = jiffies;
+
 	err = ar->open(ar);
 	if (err)
 		goto out;
@@ -738,17 +1133,17 @@ out:
 static void ar9170_op_stop(struct ieee80211_hw *hw)
 {
 	struct ar9170 *ar = hw->priv;
+	unsigned int i;
 
 	if (IS_STARTED(ar))
 		ar->state = AR9170_IDLE;
 
-	mutex_lock(&ar->mutex);
+	flush_workqueue(ar->hw->workqueue);
 
-	cancel_delayed_work_sync(&ar->tx_status_janitor);
+	cancel_delayed_work_sync(&ar->tx_janitor);
 	cancel_work_sync(&ar->filter_config_work);
 	cancel_work_sync(&ar->beacon_work);
-	skb_queue_purge(&ar->global_tx_status_waste);
-	skb_queue_purge(&ar->global_tx_status);
+	mutex_lock(&ar->mutex);
 
 	if (IS_ACCEPTING_CMD(ar)) {
 		ar9170_set_leds_state(ar, 0);
@@ -758,51 +1153,32 @@ static void ar9170_op_stop(struct ieee80211_hw *hw)
 		ar->stop(ar);
 	}
 
+	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
+		skb_queue_purge(&ar->tx_pending[i]);
+		skb_queue_purge(&ar->tx_status[i]);
+	}
 	mutex_unlock(&ar->mutex);
 }
 
-int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
 {
-	struct ar9170 *ar = hw->priv;
 	struct ieee80211_hdr *hdr;
 	struct ar9170_tx_control *txc;
 	struct ieee80211_tx_info *info;
-	struct ieee80211_rate *rate = NULL;
 	struct ieee80211_tx_rate *txrate;
+	struct ar9170_tx_info *arinfo;
 	unsigned int queue = skb_get_queue_mapping(skb);
-	unsigned long flags = 0;
-	struct ar9170_sta_info *sta_info = NULL;
-	u32 power, chains;
 	u16 keytype = 0;
 	u16 len, icv = 0;
-	int err;
-	bool tx_status;
 
-	if (unlikely(!IS_STARTED(ar)))
-		goto err_free;
+	BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
 
 	hdr = (void *)skb->data;
 	info = IEEE80211_SKB_CB(skb);
 	len = skb->len;
 
-	spin_lock_irqsave(&ar->tx_stats_lock, flags);
-	if (ar->tx_stats[queue].limit < ar->tx_stats[queue].len) {
-		spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-		return NETDEV_TX_OK;
-	}
-
-	ar->tx_stats[queue].len++;
-	ar->tx_stats[queue].count++;
-	if (ar->tx_stats[queue].limit == ar->tx_stats[queue].len)
-		ieee80211_stop_queue(hw, queue);
-
-	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-
 	txc = (void *)skb_push(skb, sizeof(*txc));
 
-	tx_status = (((info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) != 0) ||
-		    ((info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) != 0));
-
 	if (info->control.hw_key) {
 		icv = info->control.hw_key->icv_len;
 
@@ -818,7 +1194,7 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 			break;
 		default:
 			WARN_ON(1);
-			goto err_dequeue;
+			goto err_out;
 		}
 	}
 
@@ -835,16 +1211,65 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if (info->flags & IEEE80211_TX_CTL_NO_ACK)
 		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_NO_ACK);
 
-	if (info->flags & IEEE80211_TX_CTL_AMPDU)
-		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
-
 	txrate = &info->control.rates[0];
-
 	if (txrate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
 		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS);
 	else if (txrate->flags & IEEE80211_TX_RC_USE_RTS_CTS)
 		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS);
 
+	arinfo = (void *)info->rate_driver_data;
+	arinfo->timeout = jiffies + msecs_to_jiffies(AR9170_QUEUE_TIMEOUT);
+
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+	     (is_valid_ether_addr(ieee80211_get_DA(hdr)))) {
+		if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+			if (unlikely(!info->control.sta))
+				goto err_out;
+
+			txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
+			arinfo->flags = AR9170_TX_FLAG_BLOCK_ACK;
+			goto out;
+		}
+
+		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
+		/*
+		 * WARNING:
+		 * Putting the QoS queue bits into an unexplored territory is
+		 * certainly not elegant.
+		 *
+		 * In my defense: This idea provides a reasonable way to
+		 * smuggle valuable information to the tx_status callback.
+		 * Also, the idea behind this bit-abuse came straight from
+		 * the original driver code.
+		 */
+
+		txc->phy_control |=
+			cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT);
+		arinfo->flags = AR9170_TX_FLAG_WAIT_FOR_ACK;
+	} else {
+		arinfo->flags = AR9170_TX_FLAG_NO_ACK;
+	}
+
+out:
+	return 0;
+
+err_out:
+	skb_pull(skb, sizeof(*txc));
+	return -EINVAL;
+}
+
+static void ar9170_tx_prepare_phy(struct ar9170 *ar, struct sk_buff *skb)
+{
+	struct ar9170_tx_control *txc;
+	struct ieee80211_tx_info *info;
+	struct ieee80211_rate *rate = NULL;
+	struct ieee80211_tx_rate *txrate;
+	u32 power, chains;
+
+	txc = (void *) skb->data;
+	info = IEEE80211_SKB_CB(skb);
+	txrate = &info->control.rates[0];
+
 	if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
 		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD);
 
@@ -864,9 +1289,12 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		u32 r = txrate->idx;
 		u8 *txpower;
 
+		/* heavy clip control */
+		txc->phy_control |= cpu_to_le32((r & 0x7) << 7);
+
 		r <<= AR9170_TX_PHY_MCS_SHIFT;
-		if (WARN_ON(r & ~AR9170_TX_PHY_MCS_MASK))
-			goto err_dequeue;
+		BUG_ON(r & ~AR9170_TX_PHY_MCS_MASK);
+
 		txc->phy_control |= cpu_to_le32(r & AR9170_TX_PHY_MCS_MASK);
 		txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_MOD_HT);
 
@@ -928,53 +1356,154 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 			chains = AR9170_TX_PHY_TXCHAIN_1;
 	}
 	txc->phy_control |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_SHIFT);
+}
 
-	if (tx_status) {
-		txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE);
-		/*
-		 * WARNING:
-		 * Putting the QoS queue bits into an unexplored territory is
-		 * certainly not elegant.
-		 *
-		 * In my defense: This idea provides a reasonable way to
-		 * smuggle valuable information to the tx_status callback.
-		 * Also, the idea behind this bit-abuse came straight from
-		 * the original driver code.
-		 */
+static void ar9170_tx(struct ar9170 *ar)
+{
+	struct sk_buff *skb;
+	unsigned long flags;
+	struct ieee80211_tx_info *info;
+	struct ar9170_tx_info *arinfo;
+	unsigned int i, frames, frames_failed, remaining_space;
+	int err;
+	bool schedule_garbagecollector = false;
 
-		txc->phy_control |=
-			cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT);
+	BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
 
-		if (info->control.sta) {
-			sta_info = (void *) info->control.sta->drv_priv;
-			skb_queue_tail(&sta_info->tx_status[queue], skb);
-		} else {
-			skb_queue_tail(&ar->global_tx_status, skb);
+	if (unlikely(!IS_STARTED(ar)))
+		return ;
+
+	remaining_space = AR9170_TX_MAX_PENDING;
+
+	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
+		spin_lock_irqsave(&ar->tx_stats_lock, flags);
+		if (ar->tx_stats[i].len >= ar->tx_stats[i].limit) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: queue %d full\n",
+			       wiphy_name(ar->hw->wiphy), i);
+
+			__ar9170_dump_txstats(ar);
+			printk(KERN_DEBUG "stuck frames: ===> \n");
+			ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
+			ar9170_dump_txqueue(ar, &ar->tx_status[i]);
+#endif /* AR9170_QUEUE_DEBUG */
+			ieee80211_stop_queue(ar->hw, i);
+			spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+			continue;
+		}
+
+		frames = min(ar->tx_stats[i].limit - ar->tx_stats[i].len,
+			     skb_queue_len(&ar->tx_pending[i]));
+
+		if (remaining_space < frames) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: tx quota reached queue:%d, "
+			       "remaining slots:%d, needed:%d\n",
+			       wiphy_name(ar->hw->wiphy), i, remaining_space,
+			       frames);
+
+			ar9170_dump_txstats(ar);
+#endif /* AR9170_QUEUE_DEBUG */
+			frames = remaining_space;
+		}
+
+		ar->tx_stats[i].len += frames;
+		ar->tx_stats[i].count += frames;
+		spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+
+		if (!frames)
+			continue;
+
+		frames_failed = 0;
+		while (frames) {
+			skb = skb_dequeue(&ar->tx_pending[i]);
+			if (unlikely(!skb)) {
+				frames_failed += frames;
+				frames = 0;
+				break;
+			}
+
+			info = IEEE80211_SKB_CB(skb);
+			arinfo = (void *) info->rate_driver_data;
+
+			/* TODO: cancel stuck frames */
+			arinfo->timeout = jiffies +
+					  msecs_to_jiffies(AR9170_TX_TIMEOUT);
+
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: send frame q:%d =>\n",
+			       wiphy_name(ar->hw->wiphy), i);
+			ar9170_print_txheader(ar, skb);
+#endif /* AR9170_QUEUE_DEBUG */
+
+			err = ar->tx(ar, skb);
+			if (unlikely(err)) {
+				frames_failed++;
+				dev_kfree_skb_any(skb);
+			} else {
+				remaining_space--;
+				schedule_garbagecollector = true;
+			}
+
+			frames--;
+		}
+
+#ifdef AR9170_QUEUE_DEBUG
+		printk(KERN_DEBUG "%s: ar9170_tx report for queue %d\n",
+		       wiphy_name(ar->hw->wiphy), i);
 
-			queue_delayed_work(ar->hw->workqueue,
-					   &ar->tx_status_janitor,
-					   msecs_to_jiffies(100));
+		printk(KERN_DEBUG "%s: unprocessed pending frames left:\n",
+		       wiphy_name(ar->hw->wiphy));
+		ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
+#endif /* AR9170_QUEUE_DEBUG */
+
+		if (unlikely(frames_failed)) {
+#ifdef AR9170_QUEUE_DEBUG
+			printk(KERN_DEBUG "%s: frames failed =>\n",
+			       wiphy_name(ar->hw->wiphy), frames_failed);
+#endif /* AR9170_QUEUE_DEBUG */
+
+			spin_lock_irqsave(&ar->tx_stats_lock, flags);
+			ar->tx_stats[i].len -= frames_failed;
+			ar->tx_stats[i].count -= frames_failed;
+			ieee80211_wake_queue(ar->hw, i);
+			spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
 		}
 	}
 
-	err = ar->tx(ar, skb, tx_status, 0);
-	if (unlikely(tx_status && err)) {
-		if (info->control.sta)
-			skb_unlink(skb, &sta_info->tx_status[queue]);
-		else
-			skb_unlink(skb, &ar->global_tx_status);
+	if (schedule_garbagecollector)
+		queue_delayed_work(ar->hw->workqueue,
+				   &ar->tx_janitor,
+				   msecs_to_jiffies(AR9170_JANITOR_DELAY));
+}
+
+int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct ar9170 *ar = hw->priv;
+	struct ieee80211_tx_info *info;
+
+	if (unlikely(!IS_STARTED(ar)))
+		goto err_free;
+
+	if (unlikely(ar9170_tx_prepare(ar, skb)))
+		goto err_free;
+
+	info = IEEE80211_SKB_CB(skb);
+	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+		/* drop frame, we do not allow TX A-MPDU aggregation yet. */
+		goto err_free;
+	} else {
+		unsigned int queue = skb_get_queue_mapping(skb);
+
+		ar9170_tx_prepare_phy(ar, skb);
+		skb_queue_tail(&ar->tx_pending[queue], skb);
 	}
 
+	ar9170_tx(ar);
 	return NETDEV_TX_OK;
 
-err_dequeue:
-	spin_lock_irqsave(&ar->tx_stats_lock, flags);
-	ar->tx_stats[queue].len--;
-	ar->tx_stats[queue].count--;
-	spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
-
 err_free:
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
@@ -1037,11 +1566,6 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
 
 	mutex_lock(&ar->mutex);
 
-	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
-		/* TODO */
-		err = 0;
-	}
-
 	if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
 		/* TODO */
 		err = 0;
@@ -1068,48 +1592,28 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
 			goto out;
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) {
+	if (changed & BSS_CHANGED_BEACON_INT) {
 		err = ar9170_set_beacon_timers(ar);
 		if (err)
 			goto out;
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		err = ar9170_set_channel(ar, hw->conf.channel,
-					 AR9170_RFI_NONE, AR9170_BW_20);
+
+		/* adjust slot time for 5 GHz */
+		err = ar9170_set_slot_time(ar);
 		if (err)
 			goto out;
-		/* adjust slot time for 5 GHz */
-		if (hw->conf.channel->band == IEEE80211_BAND_5GHZ)
-			err = ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME,
-					       9 << 10);
-	}
-
-out:
-	mutex_unlock(&ar->mutex);
-	return err;
-}
-
-static int ar9170_op_config_interface(struct ieee80211_hw *hw,
-				      struct ieee80211_vif *vif,
-				      struct ieee80211_if_conf *conf)
-{
-	struct ar9170 *ar = hw->priv;
-	int err = 0;
-
-	mutex_lock(&ar->mutex);
 
-	if (conf->changed & IEEE80211_IFCC_BSSID) {
-		memcpy(ar->bssid, conf->bssid, ETH_ALEN);
-		err = ar9170_set_operating_mode(ar);
-	}
-
-	if (conf->changed & IEEE80211_IFCC_BEACON) {
-		err = ar9170_update_beacon(ar);
+		err = ar9170_set_dyn_sifs_ack(ar);
+		if (err)
+			goto out;
 
+		err = ar9170_set_channel(ar, hw->conf.channel,
+				AR9170_RFI_NONE,
+				nl80211_to_ar9170(hw->conf.channel_type));
 		if (err)
 			goto out;
-		err = ar9170_set_beacon_timers(ar);
 	}
 
 out:
@@ -1123,24 +1627,30 @@ static void ar9170_set_filters(struct work_struct *work)
 					 filter_config_work);
 	int err;
 
-	mutex_lock(&ar->mutex);
 	if (unlikely(!IS_STARTED(ar)))
-		goto unlock;
+		return ;
 
-	if (ar->filter_changed & AR9170_FILTER_CHANGED_PROMISC) {
+	mutex_lock(&ar->mutex);
+	if (test_and_clear_bit(AR9170_FILTER_CHANGED_MODE,
+			       &ar->filter_changed)) {
 		err = ar9170_set_operating_mode(ar);
 		if (err)
 			goto unlock;
 	}
 
-	if (ar->filter_changed & AR9170_FILTER_CHANGED_MULTICAST) {
+	if (test_and_clear_bit(AR9170_FILTER_CHANGED_MULTICAST,
+			       &ar->filter_changed)) {
 		err = ar9170_update_multicast(ar);
 		if (err)
 			goto unlock;
 	}
 
-	if (ar->filter_changed & AR9170_FILTER_CHANGED_FRAMEFILTER)
+	if (test_and_clear_bit(AR9170_FILTER_CHANGED_FRAMEFILTER,
+			       &ar->filter_changed)) {
 		err = ar9170_update_frame_filter(ar);
+		if (err)
+			goto unlock;
+	}
 
 unlock:
 	mutex_unlock(&ar->mutex);
@@ -1155,8 +1665,8 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
 
 	/* mask supported flags */
 	*new_flags &= FIF_ALLMULTI | FIF_CONTROL | FIF_BCN_PRBRESP_PROMISC |
-		      FIF_PROMISC_IN_BSS;
-
+		      FIF_PROMISC_IN_BSS | FIF_FCSFAIL | FIF_PLCPFAIL;
+	ar->filter_state = *new_flags;
 	/*
 	 * We can support more by setting the sniffer bit and
 	 * then checking the error flags, later.
@@ -1170,7 +1680,7 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
 			int i;
 
 			/* always get broadcast frames */
-			mchash = 1ULL << (0xff>>2);
+			mchash = 1ULL << (0xff >> 2);
 
 			for (i = 0; i < mc_count; i++) {
 				if (WARN_ON(!mclist))
@@ -1180,7 +1690,7 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
 			}
 		ar->want_mc_hash = mchash;
 		}
-		ar->filter_changed |= AR9170_FILTER_CHANGED_MULTICAST;
+		set_bit(AR9170_FILTER_CHANGED_MULTICAST, &ar->filter_changed);
 	}
 
 	if (changed_flags & FIF_CONTROL) {
@@ -1196,12 +1706,14 @@ static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
 		else
 			ar->want_filter = ar->cur_filter & ~filter;
 
-		ar->filter_changed |= AR9170_FILTER_CHANGED_FRAMEFILTER;
+		set_bit(AR9170_FILTER_CHANGED_FRAMEFILTER,
+			&ar->filter_changed);
 	}
 
 	if (changed_flags & FIF_PROMISC_IN_BSS) {
 		ar->sniffer_enabled = ((*new_flags) & FIF_PROMISC_IN_BSS) != 0;
-		ar->filter_changed |= AR9170_FILTER_CHANGED_PROMISC;
+		set_bit(AR9170_FILTER_CHANGED_MODE,
+			&ar->filter_changed);
 	}
 
 	if (likely(IS_STARTED(ar)))
@@ -1218,48 +1730,54 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
 
 	mutex_lock(&ar->mutex);
 
-	ar9170_regwrite_begin(ar);
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(ar->bssid, bss_conf->bssid, ETH_ALEN);
+		err = ar9170_set_operating_mode(ar);
+		if (err)
+			goto out;
+	}
 
-	if (changed & BSS_CHANGED_ASSOC) {
-		ar->state = bss_conf->assoc ? AR9170_ASSOCIATED : ar->state;
+	if (changed & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED)) {
+		err = ar9170_update_beacon(ar);
+		if (err)
+			goto out;
 
+		err = ar9170_set_beacon_timers(ar);
+		if (err)
+			goto out;
+	}
+
+	if (changed & BSS_CHANGED_ASSOC) {
 #ifndef CONFIG_AR9170_LEDS
 		/* enable assoc LED. */
 		err = ar9170_set_leds_state(ar, bss_conf->assoc ? 2 : 0);
 #endif /* CONFIG_AR9170_LEDS */
 	}
 
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		err = ar9170_set_beacon_timers(ar);
+		if (err)
+			goto out;
+	}
+
 	if (changed & BSS_CHANGED_HT) {
 		/* TODO */
 		err = 0;
 	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
-		u32 slottime = 20;
-
-		if (bss_conf->use_short_slot)
-			slottime = 9;
-
-		ar9170_regwrite(AR9170_MAC_REG_SLOT_TIME, slottime << 10);
+		err = ar9170_set_slot_time(ar);
+		if (err)
+			goto out;
 	}
 
 	if (changed & BSS_CHANGED_BASIC_RATES) {
-		u32 cck, ofdm;
-
-		if (hw->conf.channel->band == IEEE80211_BAND_5GHZ) {
-			ofdm = bss_conf->basic_rates;
-			cck = 0;
-		} else {
-			/* four cck rates */
-			cck = bss_conf->basic_rates & 0xf;
-			ofdm = bss_conf->basic_rates >> 4;
-		}
-		ar9170_regwrite(AR9170_MAC_REG_BASIC_RATE,
-				ofdm << 8 | cck);
+		err = ar9170_set_basic_rates(ar);
+		if (err)
+			goto out;
 	}
 
-	ar9170_regwrite_finish();
-	err = ar9170_regwrite_result();
+out:
 	mutex_unlock(&ar->mutex);
 }
 
@@ -1298,7 +1816,7 @@ static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 
 	switch (key->alg) {
 	case ALG_WEP:
-		if (key->keylen == LEN_WEP40)
+		if (key->keylen == WLAN_KEY_LEN_WEP40)
 			ktype = AR9170_ENC_ALG_WEP64;
 		else
 			ktype = AR9170_ENC_ALG_WEP128;
@@ -1411,43 +1929,6 @@ static void ar9170_sta_notify(struct ieee80211_hw *hw,
 			      enum sta_notify_cmd cmd,
 			      struct ieee80211_sta *sta)
 {
-	struct ar9170 *ar = hw->priv;
-	struct ar9170_sta_info *info = (void *) sta->drv_priv;
-	struct sk_buff *skb;
-	unsigned int i;
-
-	switch (cmd) {
-	case STA_NOTIFY_ADD:
-		for (i = 0; i < ar->hw->queues; i++)
-			skb_queue_head_init(&info->tx_status[i]);
-		break;
-
-	case STA_NOTIFY_REMOVE:
-
-		/*
-		 * transfer all outstanding frames that need a tx_status
-		 * reports to the global tx_status queue
-		 */
-
-		for (i = 0; i < ar->hw->queues; i++) {
-			while ((skb = skb_dequeue(&info->tx_status[i]))) {
-#ifdef AR9170_QUEUE_DEBUG
-				printk(KERN_DEBUG "%s: queueing frame in "
-					  "global tx_status queue =>\n",
-				       wiphy_name(ar->hw->wiphy));
-
-				ar9170_print_txheader(ar, skb);
-#endif /* AR9170_QUEUE_DEBUG */
-				skb_queue_tail(&ar->global_tx_status, skb);
-			}
-		}
-		queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor,
-				   msecs_to_jiffies(100));
-		break;
-
-	default:
-		break;
-	}
 }
 
 static int ar9170_get_stats(struct ieee80211_hw *hw,
@@ -1486,7 +1967,7 @@ static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	int ret;
 
 	mutex_lock(&ar->mutex);
-	if ((param) && !(queue > ar->hw->queues)) {
+	if ((param) && !(queue > __AR9170_NUM_TXQ)) {
 		memcpy(&ar->edcf[ar9170_qos_hwmap[queue]],
 		       param, sizeof(*param));
 
@@ -1498,6 +1979,24 @@ static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	return ret;
 }
 
+static int ar9170_ampdu_action(struct ieee80211_hw *hw,
+			       enum ieee80211_ampdu_mlme_action action,
+			       struct ieee80211_sta *sta, u16 tid, u16 *ssn)
+{
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+	case IEEE80211_AMPDU_RX_STOP:
+		/*
+		 * Something goes wrong -- RX locks up
+		 * after a while of receiving aggregated
+		 * frames -- not enabling for now.
+		 */
+		return -EOPNOTSUPP;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static const struct ieee80211_ops ar9170_ops = {
 	.start			= ar9170_op_start,
 	.stop			= ar9170_op_stop,
@@ -1505,7 +2004,6 @@ static const struct ieee80211_ops ar9170_ops = {
 	.add_interface		= ar9170_op_add_interface,
 	.remove_interface	= ar9170_op_remove_interface,
 	.config			= ar9170_op_config,
-	.config_interface	= ar9170_op_config_interface,
 	.configure_filter	= ar9170_op_configure_filter,
 	.conf_tx		= ar9170_conf_tx,
 	.bss_info_changed	= ar9170_op_bss_info_changed,
@@ -1514,29 +2012,45 @@ static const struct ieee80211_ops ar9170_ops = {
 	.sta_notify		= ar9170_sta_notify,
 	.get_stats		= ar9170_get_stats,
 	.get_tx_stats		= ar9170_get_tx_stats,
+	.ampdu_action		= ar9170_ampdu_action,
 };
 
 void *ar9170_alloc(size_t priv_size)
 {
 	struct ieee80211_hw *hw;
 	struct ar9170 *ar;
+	struct sk_buff *skb;
 	int i;
 
+	/*
+	 * this buffer is used for rx stream reconstruction.
+	 * Under heavy load this device (or the transport layer?)
+	 * tends to split the streams into seperate rx descriptors.
+	 */
+
+	skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL);
+	if (!skb)
+		goto err_nomem;
+
 	hw = ieee80211_alloc_hw(priv_size, &ar9170_ops);
 	if (!hw)
-		return ERR_PTR(-ENOMEM);
+		goto err_nomem;
 
 	ar = hw->priv;
 	ar->hw = hw;
+	ar->rx_failover = skb;
 
 	mutex_init(&ar->mutex);
 	spin_lock_init(&ar->cmdlock);
 	spin_lock_init(&ar->tx_stats_lock);
-	skb_queue_head_init(&ar->global_tx_status);
-	skb_queue_head_init(&ar->global_tx_status_waste);
+	for (i = 0; i < __AR9170_NUM_TXQ; i++) {
+		skb_queue_head_init(&ar->tx_status[i]);
+		skb_queue_head_init(&ar->tx_pending[i]);
+	}
+	ar9170_rx_reset_rx_mpdu(ar);
 	INIT_WORK(&ar->filter_config_work, ar9170_set_filters);
 	INIT_WORK(&ar->beacon_work, ar9170_new_beacon);
-	INIT_DELAYED_WORK(&ar->tx_status_janitor, ar9170_tx_status_janitor);
+	INIT_DELAYED_WORK(&ar->tx_janitor, ar9170_tx_janitor);
 
 	/* all hw supports 2.4 GHz, so set channel to 1 by default */
 	ar->channel = &ar9170_2ghz_chantable[0];
@@ -1561,6 +2075,10 @@ void *ar9170_alloc(size_t priv_size)
 		ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */
 
 	return ar;
+
+err_nomem:
+	kfree_skb(skb);
+	return ERR_PTR(-ENOMEM);
 }
 
 static int ar9170_read_eeprom(struct ar9170 *ar)
@@ -1619,12 +2137,24 @@ static int ar9170_read_eeprom(struct ar9170 *ar)
 	else
 		ar->hw->channel_change_time = 80 * 1000;
 
+	ar->regulatory.current_rd = le16_to_cpu(ar->eeprom.reg_domain[0]);
+	ar->regulatory.current_rd_ext = le16_to_cpu(ar->eeprom.reg_domain[1]);
+
 	/* second part of wiphy init */
 	SET_IEEE80211_PERM_ADDR(ar->hw, addr);
 
 	return bands ? 0 : -EINVAL;
 }
 
+static int ar9170_reg_notifier(struct wiphy *wiphy,
+			struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ar9170 *ar = hw->priv;
+
+	return ath_reg_notifier_apply(wiphy, request, &ar->regulatory);
+}
+
 int ar9170_register(struct ar9170 *ar, struct device *pdev)
 {
 	int err;
@@ -1634,10 +2164,18 @@ int ar9170_register(struct ar9170 *ar, struct device *pdev)
 	if (err)
 		goto err_out;
 
+	err = ath_regd_init(&ar->regulatory, ar->hw->wiphy,
+			    ar9170_reg_notifier);
+	if (err)
+		goto err_out;
+
 	err = ieee80211_register_hw(ar->hw);
 	if (err)
 		goto err_out;
 
+	if (!ath_is_world_regd(&ar->regulatory))
+		regulatory_hint(ar->hw->wiphy, ar->regulatory.alpha2);
+
 	err = ar9170_init_leds(ar);
 	if (err)
 		goto err_unreg;
@@ -1666,6 +2204,7 @@ void ar9170_unregister(struct ar9170 *ar)
 	ar9170_unregister_leds(ar);
 #endif /* CONFIG_AR9170_LEDS */
 
+	kfree_skb(ar->rx_failover);
 	ieee80211_unregister_hw(ar->hw);
 	mutex_destroy(&ar->mutex);
 }
diff --git a/drivers/net/wireless/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index 6ce20754b8e..df86f70cd81 100644
--- a/drivers/net/wireless/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -401,7 +401,7 @@ int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
 	int i, err;
 	u32 val;
 	bool is_2ghz = band == IEEE80211_BAND_2GHZ;
-	bool is_40mhz = false; /* XXX: for now */
+	bool is_40mhz = conf_is_ht40(&ar->hw->conf);
 
 	ar9170_regwrite_begin(ar);
 
@@ -1200,7 +1200,7 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 		return -ENOSYS;
 	}
 
-	if (0 /* 2 streams capable */)
+	if (ar->eeprom.tx_mask != 1)
 		tmp |= 0x100;
 
 	err = ar9170_write_reg(ar, 0x1c5804, tmp);
@@ -1214,7 +1214,7 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 	freqpar = ar9170_get_hw_dyn_params(channel, bw);
 
 	vals[0] = cpu_to_le32(channel->center_freq * 1000);
-	vals[1] = cpu_to_le32(bw == AR9170_BW_20 ? 0 : 1);
+	vals[1] = cpu_to_le32(conf_is_ht40(&ar->hw->conf));
 	vals[2] = cpu_to_le32(offs << 2 | 1);
 	vals[3] = cpu_to_le32(freqpar->coeff_exp);
 	vals[4] = cpu_to_le32(freqpar->coeff_man);
diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index fddda477095..754b1f8d8da 100644
--- a/drivers/net/wireless/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -51,9 +51,14 @@ MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
+MODULE_FIRMWARE("ar9170.fw");
 MODULE_FIRMWARE("ar9170-1.fw");
 MODULE_FIRMWARE("ar9170-2.fw");
 
+enum ar9170_requirements {
+	AR9170_REQ_FW1_ONLY = 1,
+};
+
 static struct usb_device_id ar9170_usb_ids[] = {
 	/* Atheros 9170 */
 	{ USB_DEVICE(0x0cf3, 0x9170) },
@@ -81,25 +86,74 @@ static struct usb_device_id ar9170_usb_ids[] = {
 	{ USB_DEVICE(0x2019, 0x5304) },
 	/* IO-Data WNGDNUS2 */
 	{ USB_DEVICE(0x04bb, 0x093f) },
+	/* AVM FRITZ!WLAN USB Stick N */
+	{ USB_DEVICE(0x057C, 0x8401) },
+	/* AVM FRITZ!WLAN USB Stick N 2.4 */
+	{ USB_DEVICE(0x057C, 0x8402), .driver_info = AR9170_REQ_FW1_ONLY },
 
 	/* terminate */
 	{}
 };
 MODULE_DEVICE_TABLE(usb, ar9170_usb_ids);
 
-static void ar9170_usb_tx_urb_complete_free(struct urb *urb)
+static void ar9170_usb_submit_urb(struct ar9170_usb *aru)
+{
+	struct urb *urb;
+	unsigned long flags;
+	int err;
+
+	if (unlikely(!IS_STARTED(&aru->common)))
+		return ;
+
+	spin_lock_irqsave(&aru->tx_urb_lock, flags);
+	if (aru->tx_submitted_urbs >= AR9170_NUM_TX_URBS) {
+		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
+		return ;
+	}
+	aru->tx_submitted_urbs++;
+
+	urb = usb_get_from_anchor(&aru->tx_pending);
+	if (!urb) {
+		aru->tx_submitted_urbs--;
+		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
+
+		return ;
+	}
+	spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
+
+	aru->tx_pending_urbs--;
+	usb_anchor_urb(urb, &aru->tx_submitted);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (unlikely(err)) {
+		if (ar9170_nag_limiter(&aru->common))
+			dev_err(&aru->udev->dev, "submit_urb failed (%d).\n",
+				err);
+
+		usb_unanchor_urb(urb);
+		aru->tx_submitted_urbs--;
+		ar9170_tx_callback(&aru->common, urb->context);
+	}
+
+	usb_free_urb(urb);
+}
+
+static void ar9170_usb_tx_urb_complete_frame(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
 	struct ar9170_usb *aru = (struct ar9170_usb *)
 	      usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 
-	if (!aru) {
+	if (unlikely(!aru)) {
 		dev_kfree_skb_irq(skb);
 		return ;
 	}
 
-	ar9170_handle_tx_status(&aru->common, skb, false,
-				AR9170_TX_STATUS_COMPLETE);
+	aru->tx_submitted_urbs--;
+
+	ar9170_tx_callback(&aru->common, skb);
+
+	ar9170_usb_submit_urb(aru);
 }
 
 static void ar9170_usb_tx_urb_complete(struct urb *urb)
@@ -126,8 +180,8 @@ static void ar9170_usb_irq_completed(struct urb *urb)
 		goto resubmit;
 	}
 
-	print_hex_dump_bytes("ar9170 irq: ", DUMP_PREFIX_OFFSET,
-			     urb->transfer_buffer, urb->actual_length);
+	ar9170_handle_command_response(&aru->common, urb->transfer_buffer,
+				       urb->actual_length);
 
 resubmit:
 	usb_anchor_urb(urb, &aru->rx_submitted);
@@ -177,16 +231,15 @@ resubmit:
 
 	usb_anchor_urb(urb, &aru->rx_submitted);
 	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (err) {
+	if (unlikely(err)) {
 		usb_unanchor_urb(urb);
-		dev_kfree_skb_irq(skb);
+		goto free;
 	}
 
 	return ;
 
 free:
 	dev_kfree_skb_irq(skb);
-	return;
 }
 
 static int ar9170_usb_prep_rx_urb(struct ar9170_usb *aru,
@@ -282,21 +335,47 @@ err_out:
 	return err;
 }
 
-static void ar9170_usb_cancel_urbs(struct ar9170_usb *aru)
+static int ar9170_usb_flush(struct ar9170 *ar)
 {
-	int ret;
+	struct ar9170_usb *aru = (void *) ar;
+	struct urb *urb;
+	int ret, err = 0;
 
-	aru->common.state = AR9170_UNKNOWN_STATE;
+	if (IS_STARTED(ar))
+		aru->common.state = AR9170_IDLE;
 
-	usb_unlink_anchored_urbs(&aru->tx_submitted);
+	usb_wait_anchor_empty_timeout(&aru->tx_pending,
+					    msecs_to_jiffies(800));
+	while ((urb = usb_get_from_anchor(&aru->tx_pending))) {
+		ar9170_tx_callback(&aru->common, (void *) urb->context);
+		usb_free_urb(urb);
+	}
 
-	/* give the LED OFF command and the deauth frame a chance to air. */
+	/* lets wait a while until the tx - queues are dried out */
 	ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted,
 					    msecs_to_jiffies(100));
 	if (ret == 0)
-		dev_err(&aru->udev->dev, "kill pending tx urbs.\n");
-	usb_poison_anchored_urbs(&aru->tx_submitted);
+		err = -ETIMEDOUT;
+
+	usb_kill_anchored_urbs(&aru->tx_submitted);
 
+	if (IS_ACCEPTING_CMD(ar))
+		aru->common.state = AR9170_STARTED;
+
+	return err;
+}
+
+static void ar9170_usb_cancel_urbs(struct ar9170_usb *aru)
+{
+	int err;
+
+	aru->common.state = AR9170_UNKNOWN_STATE;
+
+	err = ar9170_usb_flush(&aru->common);
+	if (err)
+		dev_err(&aru->udev->dev, "stuck tx urbs!\n");
+
+	usb_poison_anchored_urbs(&aru->tx_submitted);
 	usb_poison_anchored_urbs(&aru->rx_submitted);
 }
 
@@ -337,7 +416,7 @@ static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
 
 	usb_anchor_urb(urb, &aru->tx_submitted);
 	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (err) {
+	if (unlikely(err)) {
 		usb_unanchor_urb(urb);
 		usb_free_urb(urb);
 		goto err_unbuf;
@@ -350,7 +429,7 @@ static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
 		goto err_unbuf;
 	}
 
-	if (outlen >= 0 && aru->readlen != outlen) {
+	if (aru->readlen != outlen) {
 		err = -EMSGSIZE;
 		goto err_unbuf;
 	}
@@ -380,12 +459,10 @@ err_free:
 	return err;
 }
 
-static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb,
-			 bool txstatus_needed, unsigned int extra_len)
+static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb)
 {
 	struct ar9170_usb *aru = (struct ar9170_usb *) ar;
 	struct urb *urb;
-	int err;
 
 	if (unlikely(!IS_STARTED(ar))) {
 		/* Seriously, what were you drink... err... thinking!? */
@@ -398,18 +475,17 @@ static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb,
 
 	usb_fill_bulk_urb(urb, aru->udev,
 			  usb_sndbulkpipe(aru->udev, AR9170_EP_TX),
-			  skb->data, skb->len + extra_len, (txstatus_needed ?
-			  ar9170_usb_tx_urb_complete :
-			  ar9170_usb_tx_urb_complete_free), skb);
+			  skb->data, skb->len,
+			  ar9170_usb_tx_urb_complete_frame, skb);
 	urb->transfer_flags |= URB_ZERO_PACKET;
 
-	usb_anchor_urb(urb, &aru->tx_submitted);
-	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (unlikely(err))
-		usb_unanchor_urb(urb);
+	usb_anchor_urb(urb, &aru->tx_pending);
+	aru->tx_pending_urbs++;
 
 	usb_free_urb(urb);
-	return err;
+
+	ar9170_usb_submit_urb(aru);
+	return 0;
 }
 
 static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer)
@@ -418,7 +494,7 @@ static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer)
 	unsigned long flags;
 	u32 in, out;
 
-	if (!buffer)
+	if (unlikely(!buffer))
 		return ;
 
 	in = le32_to_cpup((__le32 *)buffer);
@@ -504,17 +580,29 @@ static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
 {
 	int err = 0;
 
-	err = request_firmware(&aru->init_values, "ar9170-1.fw",
+	err = request_firmware(&aru->firmware, "ar9170.fw",
 			       &aru->udev->dev);
-	if (err) {
-		dev_err(&aru->udev->dev, "file with init values not found.\n");
-		return err;
+	if (!err) {
+		aru->init_values = NULL;
+		return 0;
 	}
 
+	if (aru->req_one_stage_fw) {
+		dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+			"not found and is required for this device\n");
+		return -EINVAL;
+	}
+
+	dev_err(&aru->udev->dev, "ar9170.fw firmware file "
+		"not found, trying old firmware...\n");
+
+	err = request_firmware(&aru->init_values, "ar9170-1.fw",
+			       &aru->udev->dev);
+
 	err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev);
 	if (err) {
 		release_firmware(aru->init_values);
-		dev_err(&aru->udev->dev, "firmware file not found.\n");
+		dev_err(&aru->udev->dev, "file with init values not found.\n");
 		return err;
 	}
 
@@ -548,6 +636,9 @@ static int ar9170_usb_upload_firmware(struct ar9170_usb *aru)
 {
 	int err;
 
+	if (!aru->init_values)
+		goto upload_fw_start;
+
 	/* First, upload initial values to device RAM */
 	err = ar9170_usb_upload(aru, aru->init_values->data,
 				aru->init_values->size, 0x102800, false);
@@ -557,6 +648,8 @@ static int ar9170_usb_upload_firmware(struct ar9170_usb *aru)
 		return err;
 	}
 
+upload_fw_start:
+
 	/* Then, upload the firmware itself and start it */
 	return ar9170_usb_upload(aru, aru->firmware->data, aru->firmware->size,
 				0x200000, true);
@@ -592,10 +685,8 @@ static void ar9170_usb_stop(struct ar9170 *ar)
 	if (IS_ACCEPTING_CMD(ar))
 		aru->common.state = AR9170_STOPPED;
 
-	/* lets wait a while until the tx - queues are dried out */
-	ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted,
-					    msecs_to_jiffies(1000));
-	if (ret == 0)
+	ret = ar9170_usb_flush(ar);
+	if (ret)
 		dev_err(&aru->udev->dev, "kill pending tx urbs.\n");
 
 	usb_poison_anchored_urbs(&aru->tx_submitted);
@@ -656,6 +747,15 @@ err_out:
 	return err;
 }
 
+static bool ar9170_requires_one_stage(const struct usb_device_id *id)
+{
+	if (!id->driver_info)
+		return false;
+	if (id->driver_info == AR9170_REQ_FW1_ONLY)
+		return true;
+	return false;
+}
+
 static int ar9170_usb_probe(struct usb_interface *intf,
 			const struct usb_device_id *id)
 {
@@ -676,19 +776,30 @@ static int ar9170_usb_probe(struct usb_interface *intf,
 	aru->intf = intf;
 	ar = &aru->common;
 
+	aru->req_one_stage_fw = ar9170_requires_one_stage(id);
+
 	usb_set_intfdata(intf, aru);
 	SET_IEEE80211_DEV(ar->hw, &udev->dev);
 
 	init_usb_anchor(&aru->rx_submitted);
+	init_usb_anchor(&aru->tx_pending);
 	init_usb_anchor(&aru->tx_submitted);
 	init_completion(&aru->cmd_wait);
+	spin_lock_init(&aru->tx_urb_lock);
+
+	aru->tx_pending_urbs = 0;
+	aru->tx_submitted_urbs = 0;
 
 	aru->common.stop = ar9170_usb_stop;
+	aru->common.flush = ar9170_usb_flush;
 	aru->common.open = ar9170_usb_open;
 	aru->common.tx = ar9170_usb_tx;
 	aru->common.exec_cmd = ar9170_usb_exec_cmd;
 	aru->common.callback_cmd = ar9170_usb_callback_cmd;
 
+#ifdef CONFIG_PM
+	udev->reset_resume = 1;
+#endif /* CONFIG_PM */
 	err = ar9170_usb_reset(aru);
 	if (err)
 		goto err_freehw;
@@ -773,11 +884,6 @@ static int ar9170_resume(struct usb_interface *intf)
 	usb_unpoison_anchored_urbs(&aru->rx_submitted);
 	usb_unpoison_anchored_urbs(&aru->tx_submitted);
 
-	/*
-	 * FIXME: firmware upload will fail on resume.
-	 * but this is better than a hang!
-	 */
-
 	err = ar9170_usb_init_device(aru);
 	if (err)
 		goto err_unrx;
@@ -805,6 +911,7 @@ static struct usb_driver ar9170_driver = {
 #ifdef CONFIG_PM
 	.suspend = ar9170_suspend,
 	.resume = ar9170_resume,
+	.reset_resume = ar9170_resume,
 #endif /* CONFIG_PM */
 };
 
diff --git a/drivers/net/wireless/ar9170/usb.h b/drivers/net/wireless/ath/ar9170/usb.h
index f5852924cd6..d098f4d5d2f 100644
--- a/drivers/net/wireless/ar9170/usb.h
+++ b/drivers/net/wireless/ath/ar9170/usb.h
@@ -43,7 +43,7 @@
 #include <linux/completion.h>
 #include <linux/spinlock.h>
 #include <linux/leds.h>
-#include <net/wireless.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include <linux/firmware.h>
 #include "eeprom.h"
@@ -51,6 +51,7 @@
 #include "ar9170.h"
 
 #define AR9170_NUM_RX_URBS			16
+#define AR9170_NUM_TX_URBS			8
 
 struct firmware;
 
@@ -60,9 +61,15 @@ struct ar9170_usb {
 	struct usb_interface *intf;
 
 	struct usb_anchor rx_submitted;
+	struct usb_anchor tx_pending;
 	struct usb_anchor tx_submitted;
 
-	spinlock_t cmdlock;
+	bool req_one_stage_fw;
+
+	spinlock_t tx_urb_lock;
+	unsigned int tx_submitted_urbs;
+	unsigned int tx_pending_urbs;
+
 	struct completion cmd_wait;
 	int readlen;
 	u8 *readbuf;
diff --git a/drivers/net/wireless/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index 75383a5df99..daf0c83527d 100644
--- a/drivers/net/wireless/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,6 +1,7 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
@@ -27,11 +28,10 @@ config ATH5K_DEBUG
 	  Say Y, if and you will get debug options for ath5k.
 	  To use this, you need to mount debugfs:
 
-	  mkdir /debug/
-	  mount -t debugfs debug /debug/
+	  mount -t debugfs debug /sys/kernel/debug
 
 	  You will get access to files under:
-	  /debug/ath5k/phy0/
+	  /sys/kernel/debug/ath5k/phy0/
 
 	  To enable debug, pass the debug level to the debug module
 	  parameter. For example:
diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
index 84a74c5248e..090dc6d268a 100644
--- a/drivers/net/wireless/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -11,5 +11,6 @@ ath5k-y				+= reset.o
 ath5k-y				+= attach.o
 ath5k-y				+= base.o
 ath5k-y				+= led.o
+ath5k-y				+= rfkill.o
 ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
 obj-$(CONFIG_ATH5K)		+= ath5k.o
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 0b616e72fe0..6358233bac9 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -27,6 +27,8 @@
 #include <linux/types.h>
 #include <net/mac80211.h>
 
+#include "../regd.h"
+
 /* RX/TX descriptor hw structs
  * TODO: Driver part should only see sw structs */
 #include "desc.h"
@@ -207,7 +209,6 @@
 #define AR5K_TUNE_MAX_TXPOWER			63
 #define AR5K_TUNE_DEFAULT_TXPOWER		25
 #define AR5K_TUNE_TPC_TXPOWER			false
-#define AR5K_TUNE_ANT_DIVERSITY			true
 #define AR5K_TUNE_HWTXTRIES			4
 
 #define AR5K_INIT_CARR_SENSE_EN			1
@@ -418,6 +419,17 @@ enum ath5k_driver_mode {
 	AR5K_MODE_MAX		=	5
 };
 
+enum ath5k_ant_mode {
+	AR5K_ANTMODE_DEFAULT	= 0,	/* default antenna setup */
+	AR5K_ANTMODE_FIXED_A	= 1,	/* only antenna A is present */
+	AR5K_ANTMODE_FIXED_B	= 2,	/* only antenna B is present */
+	AR5K_ANTMODE_SINGLE_AP	= 3,	/* sta locked on a single ap */
+	AR5K_ANTMODE_SECTOR_AP	= 4,	/* AP with tx antenna set on tx desc */
+	AR5K_ANTMODE_SECTOR_STA	= 5,	/* STA with tx antenna set on tx desc */
+	AR5K_ANTMODE_DEBUG	= 6,	/* Debug mode -A -> Rx, B-> Tx- */
+	AR5K_ANTMODE_MAX,
+};
+
 
 /****************\
   TX DEFINITIONS
@@ -1039,8 +1051,6 @@ struct ath5k_hw {
 	bool			ah_5ghz;
 	bool			ah_2ghz;
 
-#define ah_regdomain		ah_capabilities.cap_regdomain.reg_current
-#define ah_regdomain_hw		ah_capabilities.cap_regdomain.reg_hw
 #define ah_modes		ah_capabilities.cap_mode
 #define ah_ee_version		ah_capabilities.cap_eeprom.ee_version
 
@@ -1051,8 +1061,11 @@ struct ath5k_hw {
 	bool			ah_software_retry;
 	u32			ah_limit_tx_retries;
 
-	u32			ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
-	bool			ah_ant_diversity;
+	/* Antenna Control */
+	u32			ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+	u8			ah_ant_mode;
+	u8			ah_tx_ant;
+	u8			ah_def_ant;
 
 	u8			ah_sta_id[ETH_ALEN];
 
@@ -1065,6 +1078,7 @@ struct ath5k_hw {
 	u32			ah_gpio[AR5K_MAX_GPIO];
 	int			ah_gpio_npins;
 
+	struct ath_regulatory	ah_regulatory;
 	struct ath5k_capabilities ah_capabilities;
 
 	struct ath5k_txq_info	ah_txq[AR5K_NUM_TX_QUEUES];
@@ -1099,11 +1113,12 @@ struct ath5k_hw {
 		/* Values in 0.25dB units */
 		s16		txp_min_pwr;
 		s16		txp_max_pwr;
+		/* Values in 0.5dB units */
 		s16		txp_offset;
 		s16		txp_ofdm;
-		/* Values in dB units */
-		s16		txp_cck_ofdm_pwr_delta;
 		s16		txp_cck_ofdm_gainf_delta;
+		/* Value in dB units */
+		s16		txp_cck_ofdm_pwr_delta;
 	} ah_txpower;
 
 	struct {
@@ -1241,6 +1256,10 @@ extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
 
+/* rfkill Functions */
+extern void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
+extern void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
+
 /* Misc functions */
 int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
@@ -1263,14 +1282,21 @@ extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *chann
 /* PHY calibration */
 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+/* Spur mitigation */
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel);
+void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel);
 /* Misc PHY functions */
 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
-extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
-extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* Antenna control */
+extern void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
+extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant);
+extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
 /* TX power setup */
 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
-extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
 
 /*
  * Functions used internaly
diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index 70d376c63aa..c41ef58393e 100644
--- a/drivers/net/wireless/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -133,7 +133,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 	ah->ah_cw_min = AR5K_TUNE_CWMIN;
 	ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
 	ah->ah_software_retry = false;
-	ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
 
 	/*
 	 * Set the mac version based on the pci id
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 32df27a9c7a..55f7de09d13 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -61,9 +61,13 @@
 
 static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
 static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
+static int modparam_all_channels;
+module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
+MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
+
 
 /******************\
 * Internal defines *
@@ -223,9 +227,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 static void ath5k_remove_interface(struct ieee80211_hw *hw,
 		struct ieee80211_if_init_conf *conf);
 static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
-static int ath5k_config_interface(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif,
-		struct ieee80211_if_conf *conf);
 static void ath5k_configure_filter(struct ieee80211_hw *hw,
 		unsigned int changed_flags,
 		unsigned int *new_flags,
@@ -241,8 +242,8 @@ static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
 static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
 static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf);
 static void ath5k_reset_tsf(struct ieee80211_hw *hw);
-static int ath5k_beacon_update(struct ath5k_softc *sc,
-		struct sk_buff *skb);
+static int ath5k_beacon_update(struct ieee80211_hw *hw,
+		struct ieee80211_vif *vif);
 static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 		struct ieee80211_vif *vif,
 		struct ieee80211_bss_conf *bss_conf,
@@ -255,7 +256,6 @@ static const struct ieee80211_ops ath5k_hw_ops = {
 	.add_interface 	= ath5k_add_interface,
 	.remove_interface = ath5k_remove_interface,
 	.config 	= ath5k_config,
-	.config_interface = ath5k_config_interface,
 	.configure_filter = ath5k_configure_filter,
 	.set_key 	= ath5k_set_key,
 	.get_stats 	= ath5k_get_stats,
@@ -516,6 +516,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
 		    IEEE80211_HW_NOISE_DBM;
 
 	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
@@ -705,6 +706,15 @@ err_no_irq:
 * Driver Initialization *
 \***********************/
 
+static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath5k_softc *sc = hw->priv;
+	struct ath_regulatory *reg = &sc->ah->ah_regulatory;
+
+	return ath_reg_notifier_apply(wiphy, request, reg);
+}
+
 static int
 ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 {
@@ -793,12 +803,23 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	memset(sc->bssidmask, 0xff, ETH_ALEN);
 	ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
 
+	ah->ah_regulatory.current_rd =
+		ah->ah_capabilities.cap_eeprom.ee_regdomain;
+	ret = ath_regd_init(&ah->ah_regulatory, hw->wiphy, ath5k_reg_notifier);
+	if (ret) {
+		ATH5K_ERR(sc, "can't initialize regulatory system\n");
+		goto err_queues;
+	}
+
 	ret = ieee80211_register_hw(hw);
 	if (ret) {
 		ATH5K_ERR(sc, "can't register ieee80211 hw\n");
 		goto err_queues;
 	}
 
+	if (!ath_is_world_regd(&sc->ah->ah_regulatory))
+		regulatory_hint(hw->wiphy, sc->ah->ah_regulatory.alpha2);
+
 	ath5k_init_leds(sc);
 
 	return 0;
@@ -862,6 +883,20 @@ ath5k_ieee2mhz(short chan)
 		return 2212 + chan * 20;
 }
 
+/*
+ * Returns true for the channel numbers used without all_channels modparam.
+ */
+static bool ath5k_is_standard_channel(short chan)
+{
+	return ((chan <= 14) ||
+		/* UNII 1,2 */
+		((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
+		/* midband */
+		((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
+		/* UNII-3 */
+		((chan & 3) == 1 && chan >= 149 && chan <= 165));
+}
+
 static unsigned int
 ath5k_copy_channels(struct ath5k_hw *ah,
 		struct ieee80211_channel *channels,
@@ -899,6 +934,9 @@ ath5k_copy_channels(struct ath5k_hw *ah,
 		if (!ath5k_channel_ok(ah, freq, chfreq))
 			continue;
 
+		if (!modparam_all_channels && !ath5k_is_standard_channel(ch))
+			continue;
+
 		/* Write channel info and increment counter */
 		channels[count].center_freq = freq;
 		channels[count].band = (chfreq == CHANNEL_2GHZ) ?
@@ -1238,7 +1276,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 		ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
 		(sc->power_level * 2),
 		hw_rate,
-		info->control.rates[0].count, keyidx, 0, flags,
+		info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
 		cts_rate, duration);
 	if (ret)
 		goto err_unmap;
@@ -1574,9 +1612,8 @@ ath5k_rx_start(struct ath5k_softc *sc)
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
 		sc->cachelsz, sc->rxbufsize);
 
-	sc->rxlink = NULL;
-
 	spin_lock_bh(&sc->rxbuflock);
+	sc->rxlink = NULL;
 	list_for_each_entry(bf, &sc->rxbuf, list) {
 		ret = ath5k_rxbuf_setup(sc, bf);
 		if (ret != 0) {
@@ -1585,9 +1622,9 @@ ath5k_rx_start(struct ath5k_softc *sc)
 		}
 	}
 	bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
+	ath5k_hw_set_rxdp(ah, bf->daddr);
 	spin_unlock_bh(&sc->rxbuflock);
 
-	ath5k_hw_set_rxdp(ah, bf->daddr);
 	ath5k_hw_start_rx_dma(ah);	/* enable recv descriptors */
 	ath5k_mode_setup(sc);		/* set filters, etc. */
 	ath5k_hw_start_rx_pcu(ah);	/* re-enable PCU/DMA engine */
@@ -1699,35 +1736,6 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
 	}
 }
 
-static void ath5k_tasklet_beacon(unsigned long data)
-{
-	struct ath5k_softc *sc = (struct ath5k_softc *) data;
-
-	/*
-	 * Software beacon alert--time to send a beacon.
-	 *
-	 * In IBSS mode we use this interrupt just to
-	 * keep track of the next TBTT (target beacon
-	 * transmission time) in order to detect wether
-	 * automatic TSF updates happened.
-	 */
-	if (sc->opmode == NL80211_IFTYPE_ADHOC) {
-		/* XXX: only if VEOL suppported */
-		u64 tsf = ath5k_hw_get_tsf64(sc->ah);
-		sc->nexttbtt += sc->bintval;
-		ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
-				"SWBA nexttbtt: %x hw_tu: %x "
-				"TSF: %llx\n",
-				sc->nexttbtt,
-				TSF_TO_TU(tsf),
-				(unsigned long long) tsf);
-	} else {
-		spin_lock(&sc->block);
-		ath5k_beacon_send(sc);
-		spin_unlock(&sc->block);
-	}
-}
-
 static void
 ath5k_tasklet_rx(unsigned long data)
 {
@@ -1736,7 +1744,7 @@ ath5k_tasklet_rx(unsigned long data)
 	struct sk_buff *skb, *next_skb;
 	dma_addr_t next_skb_addr;
 	struct ath5k_softc *sc = (void *)data;
-	struct ath5k_buf *bf, *bf_last;
+	struct ath5k_buf *bf;
 	struct ath5k_desc *ds;
 	int ret;
 	int hdrlen;
@@ -1747,7 +1755,6 @@ ath5k_tasklet_rx(unsigned long data)
 		ATH5K_WARN(sc, "empty rx buf pool\n");
 		goto unlock;
 	}
-	bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
 	do {
 		rxs.flag = 0;
 
@@ -1756,24 +1763,9 @@ ath5k_tasklet_rx(unsigned long data)
 		skb = bf->skb;
 		ds = bf->desc;
 
-		/*
-		 * last buffer must not be freed to ensure proper hardware
-		 * function. When the hardware finishes also a packet next to
-		 * it, we are sure, it doesn't use it anymore and we can go on.
-		 */
-		if (bf_last == bf)
-			bf->flags |= 1;
-		if (bf->flags) {
-			struct ath5k_buf *bf_next = list_entry(bf->list.next,
-					struct ath5k_buf, list);
-			ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
-					&rs);
-			if (ret)
-				break;
-			bf->flags &= ~1;
-			/* skip the overwritten one (even status is martian) */
-			goto next;
-		}
+		/* bail if HW is still using self-linked descriptor */
+		if (ath5k_hw_get_rxdp(sc->ah) == bf->daddr)
+			break;
 
 		ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
 		if (unlikely(ret == -EINPROGRESS))
@@ -2014,7 +2006,8 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	struct	ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ath5k_hw *ah = sc->ah;
 	struct ath5k_desc *ds;
-	int ret, antenna = 0;
+	int ret = 0;
+	u8 antenna;
 	u32 flags;
 
 	bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
@@ -2028,23 +2021,35 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	}
 
 	ds = bf->desc;
+	antenna = ah->ah_tx_ant;
 
 	flags = AR5K_TXDESC_NOACK;
 	if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
 		ds->ds_link = bf->daddr;	/* self-linked */
 		flags |= AR5K_TXDESC_VEOL;
-		/*
-		 * Let hardware handle antenna switching if txantenna is not set
-		 */
-	} else {
+	} else
 		ds->ds_link = 0;
-		/*
-		 * Switch antenna every 4 beacons if txantenna is not set
-		 * XXX assumes two antennas
-		 */
-		if (antenna == 0)
-			antenna = sc->bsent & 4 ? 2 : 1;
-	}
+
+	/*
+	 * If we use multiple antennas on AP and use
+	 * the Sectored AP scenario, switch antenna every
+	 * 4 beacons to make sure everybody hears our AP.
+	 * When a client tries to associate, hw will keep
+	 * track of the tx antenna to be used for this client
+	 * automaticaly, based on ACKed packets.
+	 *
+	 * Note: AP still listens and transmits RTS on the
+	 * default antenna which is supposed to be an omni.
+	 *
+	 * Note2: On sectored scenarios it's possible to have
+	 * multiple antennas (1omni -the default- and 14 sectors)
+	 * so if we choose to actually support this mode we need
+	 * to allow user to set how many antennas we have and tweak
+	 * the code below to send beacons on all of them.
+	 */
+	if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
+		antenna = sc->bsent & 4 ? 2 : 1;
+
 
 	/* FIXME: If we are in g mode and rate is a CCK rate
 	 * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
@@ -2065,6 +2070,13 @@ err_unmap:
 	return ret;
 }
 
+static void ath5k_beacon_disable(struct ath5k_softc *sc)
+{
+	sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
+	ath5k_hw_set_imr(sc->ah, sc->imask);
+	ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
+}
+
 /*
  * Transmit a beacon frame at SWBA.  Dynamic updates to the
  * frame contents are done as needed and the slot time is
@@ -2097,7 +2109,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 		sc->bmisscount++;
 		ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
 			"missed %u consecutive beacons\n", sc->bmisscount);
-		if (sc->bmisscount > 3) {		/* NB: 3 is a guess */
+		if (sc->bmisscount > 10) {	/* NB: 10 is a guess */
 			ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
 				"stuck beacon time (%u missed)\n",
 				sc->bmisscount);
@@ -2118,10 +2130,14 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 	 * are still pending on the queue.
 	 */
 	if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
-		ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
+		ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
 		/* NB: hw still stops DMA, so proceed */
 	}
 
+	/* refresh the beacon for AP mode */
+	if (sc->opmode == NL80211_IFTYPE_AP)
+		ath5k_beacon_update(sc->hw, sc->vif);
+
 	ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
 	ath5k_hw_start_tx_dma(ah, sc->bhalq);
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
@@ -2278,6 +2294,35 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 	ath5k_hw_set_imr(ah, sc->imask);
 }
 
+static void ath5k_tasklet_beacon(unsigned long data)
+{
+	struct ath5k_softc *sc = (struct ath5k_softc *) data;
+
+	/*
+	 * Software beacon alert--time to send a beacon.
+	 *
+	 * In IBSS mode we use this interrupt just to
+	 * keep track of the next TBTT (target beacon
+	 * transmission time) in order to detect wether
+	 * automatic TSF updates happened.
+	 */
+	if (sc->opmode == NL80211_IFTYPE_ADHOC) {
+		/* XXX: only if VEOL suppported */
+		u64 tsf = ath5k_hw_get_tsf64(sc->ah);
+		sc->nexttbtt += sc->bintval;
+		ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+				"SWBA nexttbtt: %x hw_tu: %x "
+				"TSF: %llx\n",
+				sc->nexttbtt,
+				TSF_TO_TU(tsf),
+				(unsigned long long) tsf);
+	} else {
+		spin_lock(&sc->block);
+		ath5k_beacon_send(sc);
+		spin_unlock(&sc->block);
+	}
+}
+
 
 /********************\
 * Interrupt handling *
@@ -2315,6 +2360,8 @@ ath5k_init(struct ath5k_softc *sc)
 	if (ret)
 		goto done;
 
+	ath5k_rfkill_hw_start(ah);
+
 	/*
 	 * Reset the key cache since some parts do not reset the
 	 * contents on initial power up or resume from suspend.
@@ -2423,6 +2470,8 @@ ath5k_stop_hw(struct ath5k_softc *sc)
 	tasklet_kill(&sc->restq);
 	tasklet_kill(&sc->beacontq);
 
+	ath5k_rfkill_hw_stop(sc->ah);
+
 	return ret;
 }
 
@@ -2452,7 +2501,7 @@ ath5k_intr(int irq, void *dev_id)
 			tasklet_schedule(&sc->restq);
 		} else {
 			if (status & AR5K_INT_SWBA) {
-				tasklet_schedule(&sc->beacontq);
+				tasklet_hi_schedule(&sc->beacontq);
 			}
 			if (status & AR5K_INT_RXEOL) {
 				/*
@@ -2481,8 +2530,11 @@ ath5k_intr(int irq, void *dev_id)
 				 */
 				ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
 			}
+			if (status & AR5K_INT_GPIO)
+				tasklet_schedule(&sc->rf_kill.toggleq);
+
 		}
-	} while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
+	} while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
 
 	if (unlikely(!counter))
 		ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
@@ -2719,6 +2771,7 @@ ath5k_remove_interface(struct ieee80211_hw *hw,
 		goto end;
 
 	ath5k_hw_set_lladdr(sc->ah, mac);
+	ath5k_beacon_disable(sc);
 	sc->vif = NULL;
 end:
 	mutex_unlock(&sc->lock);
@@ -2731,53 +2784,43 @@ static int
 ath5k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
 	struct ieee80211_conf *conf = &hw->conf;
-	int ret;
+	int ret = 0;
 
 	mutex_lock(&sc->lock);
 
-	sc->bintval = conf->beacon_int;
-	sc->power_level = conf->power_level;
-
 	ret = ath5k_chan_set(sc, conf->channel);
+	if (ret < 0)
+		goto unlock;
 
-	mutex_unlock(&sc->lock);
-	return ret;
-}
-
-static int
-ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-			struct ieee80211_if_conf *conf)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	int ret = 0;
+	if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
+	(sc->power_level != conf->power_level)) {
+		sc->power_level = conf->power_level;
 
-	mutex_lock(&sc->lock);
-	if (sc->vif != vif) {
-		ret = -EIO;
-		goto unlock;
-	}
-	if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
-		/* Cache for later use during resets */
-		memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
-		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
-		 * a clean way of letting us retrieve this yet. */
-		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-		mmiowb();
-	}
-	if (conf->changed & IEEE80211_IFCC_BEACON &&
-			(vif->type == NL80211_IFTYPE_ADHOC ||
-			 vif->type == NL80211_IFTYPE_MESH_POINT ||
-			 vif->type == NL80211_IFTYPE_AP)) {
-		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-		if (!beacon) {
-			ret = -ENOMEM;
-			goto unlock;
-		}
-		ath5k_beacon_update(sc, beacon);
+		/* Half dB steps */
+		ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
 	}
 
+	/* TODO:
+	 * 1) Move this on config_interface and handle each case
+	 * separately eg. when we have only one STA vif, use
+	 * AR5K_ANTMODE_SINGLE_AP
+	 *
+	 * 2) Allow the user to change antenna mode eg. when only
+	 * one antenna is present
+	 *
+	 * 3) Allow the user to set default/tx antenna when possible
+	 *
+	 * 4) Default mode should handle 90% of the cases, together
+	 * with fixed a/b and single AP modes we should be able to
+	 * handle 99%. Sectored modes are extreme cases and i still
+	 * haven't found a usage for them. If we decide to support them,
+	 * then we must allow the user to set how many tx antennas we
+	 * have available
+	 */
+	ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT);
+
 unlock:
 	mutex_unlock(&sc->lock);
 	return ret;
@@ -3020,28 +3063,62 @@ ath5k_reset_tsf(struct ieee80211_hw *hw)
 		ath5k_hw_reset_tsf(sc->ah);
 }
 
+/*
+ * Updates the beacon that is sent by ath5k_beacon_send.  For adhoc,
+ * this is called only once at config_bss time, for AP we do it every
+ * SWBA interrupt so that the TIM will reflect buffered frames.
+ *
+ * Called with the beacon lock.
+ */
 static int
-ath5k_beacon_update(struct ath5k_softc *sc, struct sk_buff *skb)
+ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
-	unsigned long flags;
 	int ret;
+	struct ath5k_softc *sc = hw->priv;
+	struct sk_buff *skb;
+
+	if (WARN_ON(!vif)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	skb = ieee80211_beacon_get(hw, vif);
+
+	if (!skb) {
+		ret = -ENOMEM;
+		goto out;
+	}
 
 	ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
 
-	spin_lock_irqsave(&sc->block, flags);
 	ath5k_txbuf_free(sc, sc->bbuf);
 	sc->bbuf->skb = skb;
 	ret = ath5k_beacon_setup(sc, sc->bbuf);
 	if (ret)
 		sc->bbuf->skb = NULL;
+out:
+	return ret;
+}
+
+/*
+ *  Update the beacon and reconfigure the beacon queues.
+ */
+static void
+ath5k_beacon_reconfig(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	int ret;
+	unsigned long flags;
+	struct ath5k_softc *sc = hw->priv;
+
+	spin_lock_irqsave(&sc->block, flags);
+	ret = ath5k_beacon_update(hw, vif);
 	spin_unlock_irqrestore(&sc->block, flags);
-	if (!ret) {
+	if (ret == 0) {
 		ath5k_beacon_config(sc);
 		mmiowb();
 	}
-
-	return ret;
 }
+
 static void
 set_beacon_filter(struct ieee80211_hw *hw, bool enable)
 {
@@ -3063,11 +3140,37 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 				    u32 changes)
 {
 	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+
+	mutex_lock(&sc->lock);
+	if (WARN_ON(sc->vif != vif))
+		goto unlock;
+
+	if (changes & BSS_CHANGED_BSSID) {
+		/* Cache for later use during resets */
+		memcpy(ah->ah_bssid, bss_conf->bssid, ETH_ALEN);
+		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
+		 * a clean way of letting us retrieve this yet. */
+		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+		mmiowb();
+	}
+
+	if (changes & BSS_CHANGED_BEACON_INT)
+		sc->bintval = bss_conf->beacon_int;
+
 	if (changes & BSS_CHANGED_ASSOC) {
-		mutex_lock(&sc->lock);
 		sc->assoc = bss_conf->assoc;
 		if (sc->opmode == NL80211_IFTYPE_STATION)
 			set_beacon_filter(hw, sc->assoc);
-		mutex_unlock(&sc->lock);
 	}
+
+	if (changes & BSS_CHANGED_BEACON &&
+	    (vif->type == NL80211_IFTYPE_ADHOC ||
+	     vif->type == NL80211_IFTYPE_MESH_POINT ||
+	     vif->type == NL80211_IFTYPE_AP)) {
+		ath5k_beacon_reconfig(hw, vif);
+	}
+
+ unlock:
+	mutex_unlock(&sc->lock);
 }
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 822956114cd..f9b7f2f819b 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -46,6 +46,7 @@
 #include <linux/wireless.h>
 #include <linux/if_ether.h>
 #include <linux/leds.h>
+#include <linux/rfkill.h>
 
 #include "ath5k.h"
 #include "debug.h"
@@ -56,7 +57,6 @@
 
 struct ath5k_buf {
 	struct list_head	list;
-	unsigned int		flags;	/* rx descriptor flags */
 	struct ath5k_desc	*desc;	/* virtual addr of desc */
 	dma_addr_t		daddr;	/* physical addr of desc */
 	struct sk_buff		*skb;	/* skbuff for buf */
@@ -92,6 +92,15 @@ struct ath5k_led
 	struct led_classdev led_dev;		/* led classdev */
 };
 
+/* Rfkill */
+struct ath5k_rfkill {
+	/* GPIO PIN for rfkill */
+	u16 gpio;
+	/* polarity of rfkill GPIO PIN */
+	bool polarity;
+	/* RFKILL toggle tasklet */
+	struct tasklet_struct toggleq;
+};
 
 #if CHAN_DEBUG
 #define ATH_CHAN_MAX	(26+26+26+200+200)
@@ -168,6 +177,8 @@ struct ath5k_softc {
 	struct tasklet_struct	txtq;		/* tx intr tasklet */
 	struct ath5k_led	tx_led;		/* tx led */
 
+	struct ath5k_rfkill	rf_kill;
+
 	spinlock_t		block;		/* protects beacon */
 	struct tasklet_struct	beacontq;	/* beacon intr tasklet */
 	struct ath5k_buf	*bbuf;		/* beacon buffer */
diff --git a/drivers/net/wireless/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c
index 367a6c7d3cc..367a6c7d3cc 100644
--- a/drivers/net/wireless/ath5k/caps.c
+++ b/drivers/net/wireless/ath/ath5k/caps.c
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index 4904a07e4b5..4904a07e4b5 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
index 66f69f04e55..66f69f04e55 100644
--- a/drivers/net/wireless/ath5k/debug.h
+++ b/drivers/net/wireless/ath/ath5k/debug.h
diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index dc30a2b70a6..dc30a2b70a6 100644
--- a/drivers/net/wireless/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
diff --git a/drivers/net/wireless/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h
index 56158c804e3..56158c804e3 100644
--- a/drivers/net/wireless/ath5k/desc.h
+++ b/drivers/net/wireless/ath/ath5k/desc.h
diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index b65b4feb2d2..941b51130a6 100644
--- a/drivers/net/wireless/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -80,8 +80,6 @@ int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
  * ath5k_hw_get_rxdp - Get RX Descriptor's address
  *
  * @ah: The &struct ath5k_hw
- *
- * XXX: Is RXDP read and clear ?
  */
 u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
 {
diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index c0fb3b09ba4..c56b494d417 100644
--- a/drivers/net/wireless/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -156,6 +156,17 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
 		ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
 	}
 
+	AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val);
+
+	if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val)
+		ee->ee_is_hb63 = true;
+	else
+		ee->ee_is_hb63 = false;
+
+	AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val);
+	ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL);
+	ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false;
+
 	return 0;
 }
 
@@ -197,16 +208,16 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
 	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
 	ee->ee_ant_control[mode][i++]	= val & 0x3f;
 
-	/* Get antenna modes */
-	ah->ah_antenna[mode][0] =
+	/* Get antenna switch tables */
+	ah->ah_ant_ctl[mode][AR5K_ANT_CTL] =
 	    (ee->ee_ant_control[mode][0] << 4);
-	ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
+	ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] =
 	     ee->ee_ant_control[mode][1] 	|
 	    (ee->ee_ant_control[mode][2] << 6) 	|
 	    (ee->ee_ant_control[mode][3] << 12) |
 	    (ee->ee_ant_control[mode][4] << 18) |
 	    (ee->ee_ant_control[mode][5] << 24);
-	ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
+	ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] =
 	     ee->ee_ant_control[mode][6] 	|
 	    (ee->ee_ant_control[mode][7] << 6) 	|
 	    (ee->ee_ant_control[mode][8] << 12) |
@@ -640,9 +651,9 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
 static inline void
 ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp)
 {
-	const static u16 intercepts3[] =
+	static const u16 intercepts3[] =
 		{ 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 };
-	const static u16 intercepts3_2[] =
+	static const u16 intercepts3_2[] =
 		{ 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 };
 	const u16 *ip;
 	int i;
@@ -1694,9 +1705,40 @@ ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
 	return 0;
 }
 
+static int
+ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 offset;
+	u16 val;
+	int ret = 0, i;
+
+	offset = AR5K_EEPROM_CTL(ee->ee_version) +
+				AR5K_EEPROM_N_CTLS(ee->ee_version);
+
+	if (ee->ee_version < AR5K_EEPROM_VERSION_5_3) {
+		/* No spur info for 5GHz */
+		ee->ee_spur_chans[0][0] = AR5K_EEPROM_NO_SPUR;
+		/* 2 channels for 2GHz (2464/2420) */
+		ee->ee_spur_chans[0][1] = AR5K_EEPROM_5413_SPUR_CHAN_1;
+		ee->ee_spur_chans[1][1] = AR5K_EEPROM_5413_SPUR_CHAN_2;
+		ee->ee_spur_chans[2][1] = AR5K_EEPROM_NO_SPUR;
+	} else if (ee->ee_version >= AR5K_EEPROM_VERSION_5_3) {
+		for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+			AR5K_EEPROM_READ(offset, val);
+			ee->ee_spur_chans[i][0] = val;
+			AR5K_EEPROM_READ(offset + AR5K_EEPROM_N_SPUR_CHANS,
+									val);
+			ee->ee_spur_chans[i][1] = val;
+			offset++;
+		}
+	}
+
+	return ret;
+}
 
 /*
- * Initialize eeprom power tables
+ * Initialize eeprom data structure
  */
 int
 ath5k_eeprom_init(struct ath5k_hw *ah)
@@ -1719,6 +1761,10 @@ ath5k_eeprom_init(struct ath5k_hw *ah)
 	if (err < 0)
 		return err;
 
+	err = ath5k_eeprom_read_spur_chans(ah);
+	if (err < 0)
+		return err;
+
 	return 0;
 }
 
@@ -1754,16 +1800,3 @@ int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
 
 	return 0;
 }
-
-bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah)
-{
-	u16 data;
-
-	ath5k_hw_eeprom_read(ah, AR5K_EEPROM_IS_HB63, &data);
-
-	if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && data)
-		return true;
-	else
-		return false;
-}
-
diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index b0c0606dea0..64be73a5eda 100644
--- a/drivers/net/wireless/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -26,6 +26,13 @@
 #define AR5K_EEPROM_MAGIC_5210		0x0000145a /* 5210 */
 
 #define	AR5K_EEPROM_IS_HB63		0x000b	/* Talon detect */
+
+#define AR5K_EEPROM_RFKILL		0x0f
+#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
+#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S	1
+
 #define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
 #define AR5K_EEPROM_CHECKSUM		0x00c0	/* EEPROM checksum */
 #define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
@@ -66,11 +73,6 @@
 #define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
 #define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5Ghz */
 
-#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
-#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
-#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
-#define AR5K_EEPROM_RFKILL_POLARITY_S	1
-
 /* Newer EEPROMs are using a different offset */
 #define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
 	(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
@@ -211,6 +213,23 @@
 #define AR5K_EEPROM_I_GAIN		10
 #define AR5K_EEPROM_CCK_OFDM_DELTA	15
 #define AR5K_EEPROM_N_IQ_CAL		2
+/* 5GHz/2GHz */
+enum ath5k_eeprom_freq_bands{
+	AR5K_EEPROM_BAND_5GHZ = 0,
+	AR5K_EEPROM_BAND_2GHZ = 1,
+	AR5K_EEPROM_N_FREQ_BANDS,
+};
+/* Spur chans per freq band */
+#define	AR5K_EEPROM_N_SPUR_CHANS	5
+/* fbin value for chan 2464 x2 */
+#define	AR5K_EEPROM_5413_SPUR_CHAN_1	1640
+/* fbin value for chan 2420 x2 */
+#define	AR5K_EEPROM_5413_SPUR_CHAN_2	1200
+#define	AR5K_EEPROM_SPUR_CHAN_MASK	0x3FFF
+#define	AR5K_EEPROM_NO_SPUR		0x8000
+#define	AR5K_SPUR_CHAN_WIDTH			87
+#define	AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz	3125
+#define	AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz	6250
 
 #define AR5K_EEPROM_READ(_o, _v) do {			\
 	ret = ath5k_hw_eeprom_read(ah, (_o), &(_v));	\
@@ -221,11 +240,11 @@
 #define AR5K_EEPROM_READ_HDR(_o, _v)					\
 	AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v);	\
 
-enum ath5k_ant_setting {
-	AR5K_ANT_VARIABLE	= 0,	/* variable by programming */
-	AR5K_ANT_FIXED_A	= 1,	/* fixed to 11a frequencies */
-	AR5K_ANT_FIXED_B	= 2,	/* fixed to 11b frequencies */
-	AR5K_ANT_MAX		= 3,
+enum ath5k_ant_table {
+	AR5K_ANT_CTL		= 0,	/* Idle switch table settings */
+	AR5K_ANT_SWTABLE_A	= 1,	/* Switch table for antenna A */
+	AR5K_ANT_SWTABLE_B	= 2,	/* Switch table for antenna B */
+	AR5K_ANT_MAX,
 };
 
 enum ath5k_ctl_mode {
@@ -369,6 +388,9 @@ struct ath5k_eeprom_info {
 	u16	ee_version;
 	u16	ee_header;
 	u16	ee_ant_gain;
+	u8	ee_rfkill_pin;
+	bool	ee_rfkill_pol;
+	bool	ee_is_hb63;
 	u16	ee_misc0;
 	u16	ee_misc1;
 	u16	ee_misc2;
@@ -436,6 +458,10 @@ struct ath5k_eeprom_info {
 	s8	ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES];
 	s8	ee_pd_gain_overlap;
 
+	/* Spur mitigation data (fbin values for spur channels) */
+	u16	ee_spur_chans[AR5K_EEPROM_N_SPUR_CHANS][AR5K_EEPROM_N_FREQ_BANDS];
+
+	/* Antenna raw switch tables */
 	u32	ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
 };
 
diff --git a/drivers/net/wireless/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c
index 64a27e73d02..64a27e73d02 100644
--- a/drivers/net/wireless/ath5k/gpio.c
+++ b/drivers/net/wireless/ath/ath5k/gpio.c
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
index 61fb621ed20..18eb5190ce4 100644
--- a/drivers/net/wireless/ath5k/initvals.c
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -537,8 +537,6 @@ static const struct ath5k_ini ar5212_ini_common_start[] = {
 	{ AR5K_DCU_TX_FILTER_1(15), 0x00000000 },
 	{ AR5K_DCU_TX_FILTER_CLR, 0x00000000 },
 	{ AR5K_DCU_TX_FILTER_SET, 0x00000000 },
-	{ AR5K_DCU_TX_FILTER_CLR, 0x00000000 },
-	{ AR5K_DCU_TX_FILTER_SET, 0x00000000 },
 	{ AR5K_STA_ID1,		0x00000000 },
 	{ AR5K_BSS_ID0,		0x00000000 },
 	{ AR5K_BSS_ID1,		0x00000000 },
@@ -669,7 +667,7 @@ static const struct ath5k_ini ar5212_ini_common_start[] = {
 	/*{ AR5K_PHY(650), 0x000001b5 },*/
 	{ AR5K_PHY(651),	0x00000000 },
 	{ AR5K_PHY_TXPOWER_RATE3, 0x20202020 },
-	{ AR5K_PHY_TXPOWER_RATE2, 0x20202020 },
+	{ AR5K_PHY_TXPOWER_RATE4, 0x20202020 },
 	/*{ AR5K_PHY(655), 0x13c889af },*/
 	{ AR5K_PHY(656),	0x38490a20 },
 	{ AR5K_PHY(657),	0x00007bb6 },
@@ -718,7 +716,7 @@ static const struct ath5k_ini_mode ar5212_ini_mode_start[] = {
 	{ AR5K_PHY_SETTLING,
 	   { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } },
 	{ AR5K_PHY_AGCCTL,
-	   { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d18 } },
+	   { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d10 } },
 	{ AR5K_PHY_NF,
 	   { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
 	{ AR5K_PHY_WEAK_OFDM_HIGH_THR,
@@ -799,7 +797,7 @@ static const struct ath5k_ini_mode rf5112_ini_mode_end[] = {
 	{ AR5K_PHY_DESIRED_SIZE,
 	   { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
 	{ AR5K_PHY_SIG,
-	   { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7ee80d2e } },
+	   { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7e800d2e } },
 	{ AR5K_PHY_AGCCOARSE,
 	   { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } },
 	{ AR5K_PHY_WEAK_OFDM_LOW_THR,
diff --git a/drivers/net/wireless/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 19555fb79c9..876725f08b6 100644
--- a/drivers/net/wireless/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -53,8 +53,6 @@
 
 /* Devices we match on for LED config info (typically laptops) */
 static const struct pci_device_id ath5k_led_devices[] = {
-	/* IBM-specific AR5212 */
-	{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
 	/* AR5211 */
 	{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) },
 	/* HP Compaq nc6xx, nc4000, nx6000 */
@@ -67,6 +65,12 @@ static const struct pci_device_id ath5k_led_devices[] = {
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
 	/* Acer Extensa 5620z (nekoreeve@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
+	/* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
+	/* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+	/* IBM-specific AR5212 (all others) */
+	{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
 	{ }
 };
 
@@ -78,7 +82,7 @@ void ath5k_led_enable(struct ath5k_softc *sc)
 	}
 }
 
-void ath5k_led_on(struct ath5k_softc *sc)
+static void ath5k_led_on(struct ath5k_softc *sc)
 {
 	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
 		return;
diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 55122f1e198..ec35503f6a4 100644
--- a/drivers/net/wireless/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -736,8 +736,8 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
 	/* When in AP mode zero timer0 to start TSF */
 	if (ah->ah_op_mode == NL80211_IFTYPE_AP)
 		ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
-	else
-		ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+
+	ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
 	ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
 	ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
 	ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
@@ -1003,7 +1003,7 @@ int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
 	 * Note2: Windows driver (ndiswrapper) sets this to
 	 *        0x00000714 instead of 0x00000007
 	 */
-	if (ah->ah_version > AR5K_AR5211) {
+	if (ah->ah_version >= AR5K_AR5211) {
 		ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
 				AR5K_KEYTABLE_TYPE(entry));
 
@@ -1038,9 +1038,9 @@ int ath5k_keycache_type(const struct ieee80211_key_conf *key)
 	case ALG_CCMP:
 		return AR5K_KEYTABLE_TYPE_CCM;
 	case ALG_WEP:
-		if (key->keylen == LEN_WEP40)
+		if (key->keylen == WLAN_KEY_LEN_WEP40)
 			return AR5K_KEYTABLE_TYPE_40;
-		else if (key->keylen == LEN_WEP104)
+		else if (key->keylen == WLAN_KEY_LEN_WEP104)
 			return AR5K_KEYTABLE_TYPE_104;
 		return -EINVAL;
 	default:
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index b48b29dca3d..a876ca8d69e 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -168,9 +168,6 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
  * tx power and a Peak to Average Power Detector (PAPD) will try
  * to measure the gain.
  *
- * TODO: Use propper tx power setting for the probe packet so
- * that we don't observe a serious power drop on the receiver
- *
  * XXX:  How about forcing a tx packet (bypassing PCU arbitrator etc)
  * just after we enable the probe so that we don't mess with
  * standard traffic ? Maybe it's time to use sw interrupts and
@@ -186,7 +183,7 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
 
 	/* Send the packet with 2dB below max power as
 	 * patent doc suggest */
-	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4,
+	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4,
 			AR5K_PHY_PAPD_PROBE_TXPOWER) |
 			AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
 
@@ -1356,6 +1353,257 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
 	return ret;
 }
 
+/***************************\
+* Spur mitigation functions *
+\***************************/
+
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	u8 refclk_freq;
+
+	if ((ah->ah_radio == AR5K_RF5112) ||
+	(ah->ah_radio == AR5K_RF5413) ||
+	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+		refclk_freq = 40;
+	else
+		refclk_freq = 32;
+
+	if ((channel->center_freq % refclk_freq != 0) &&
+	((channel->center_freq % refclk_freq < 10) ||
+	(channel->center_freq % refclk_freq > 22)))
+		return true;
+	else
+		return false;
+}
+
+void
+ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 mag_mask[4] = {0, 0, 0, 0};
+	u32 pilot_mask[2] = {0, 0};
+	/* Note: fbin values are scaled up by 2 */
+	u16 spur_chan_fbin, chan_fbin, symbol_width, spur_detection_window;
+	s32 spur_delta_phase, spur_freq_sigma_delta;
+	s32 spur_offset, num_symbols_x16;
+	u8 num_symbol_offsets, i, freq_band;
+
+	/* Convert current frequency to fbin value (the same way channels
+	 * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale
+	 * up by 2 so we can compare it later */
+	if (channel->hw_value & CHANNEL_2GHZ) {
+		chan_fbin = (channel->center_freq - 2300) * 10;
+		freq_band = AR5K_EEPROM_BAND_2GHZ;
+	} else {
+		chan_fbin = (channel->center_freq - 4900) * 10;
+		freq_band = AR5K_EEPROM_BAND_5GHZ;
+	}
+
+	/* Check if any spur_chan_fbin from EEPROM is
+	 * within our current channel's spur detection range */
+	spur_chan_fbin = AR5K_EEPROM_NO_SPUR;
+	spur_detection_window = AR5K_SPUR_CHAN_WIDTH;
+	/* XXX: Half/Quarter channels ?*/
+	if (channel->hw_value & CHANNEL_TURBO)
+		spur_detection_window *= 2;
+
+	for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+		spur_chan_fbin = ee->ee_spur_chans[i][freq_band];
+
+		/* Note: mask cleans AR5K_EEPROM_NO_SPUR flag
+		 * so it's zero if we got nothing from EEPROM */
+		if (spur_chan_fbin == AR5K_EEPROM_NO_SPUR) {
+			spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+			break;
+		}
+
+		if ((chan_fbin - spur_detection_window <=
+		(spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK)) &&
+		(chan_fbin + spur_detection_window >=
+		(spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK))) {
+			spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+			break;
+		}
+	}
+
+	/* We need to enable spur filter for this channel */
+	if (spur_chan_fbin) {
+		spur_offset = spur_chan_fbin - chan_fbin;
+		/*
+		 * Calculate deltas:
+		 * spur_freq_sigma_delta -> spur_offset / sample_freq << 21
+		 * spur_delta_phase -> spur_offset / chip_freq << 11
+		 * Note: Both values have 100KHz resolution
+		 */
+		/* XXX: Half/Quarter rate channels ? */
+		switch (channel->hw_value) {
+		case CHANNEL_A:
+			/* Both sample_freq and chip_freq are 40MHz */
+			spur_delta_phase = (spur_offset << 17) / 25;
+			spur_freq_sigma_delta = (spur_delta_phase >> 10);
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+			break;
+		case CHANNEL_G:
+			/* sample_freq -> 40MHz chip_freq -> 44MHz
+			 * (for b compatibility) */
+			spur_freq_sigma_delta = (spur_offset << 8) / 55;
+			spur_delta_phase = (spur_offset << 17) / 25;
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+			break;
+		case CHANNEL_T:
+		case CHANNEL_TG:
+			/* Both sample_freq and chip_freq are 80MHz */
+			spur_delta_phase = (spur_offset << 16) / 25;
+			spur_freq_sigma_delta = (spur_delta_phase >> 10);
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz;
+			break;
+		default:
+			return;
+		}
+
+		/* Calculate pilot and magnitude masks */
+
+		/* Scale up spur_offset by 1000 to switch to 100HZ resolution
+		 * and divide by symbol_width to find how many symbols we have
+		 * Note: number of symbols is scaled up by 16 */
+		num_symbols_x16 = ((spur_offset * 1000) << 4) / symbol_width;
+
+		/* Spur is on a symbol if num_symbols_x16 % 16 is zero */
+		if (!(num_symbols_x16 & 0xF))
+			/* _X_ */
+			num_symbol_offsets = 3;
+		else
+			/* _xx_ */
+			num_symbol_offsets = 4;
+
+		for (i = 0; i < num_symbol_offsets; i++) {
+
+			/* Calculate pilot mask */
+			s32 curr_sym_off =
+				(num_symbols_x16 / 16) + i + 25;
+
+			/* Pilot magnitude mask seems to be a way to
+			 * declare the boundaries for our detection
+			 * window or something, it's 2 for the middle
+			 * value(s) where the symbol is expected to be
+			 * and 1 on the boundary values */
+			u8 plt_mag_map =
+				(i == 0 || i == (num_symbol_offsets - 1))
+								? 1 : 2;
+
+			if (curr_sym_off >= 0 && curr_sym_off <= 32) {
+				if (curr_sym_off <= 25)
+					pilot_mask[0] |= 1 << curr_sym_off;
+				else if (curr_sym_off >= 27)
+					pilot_mask[0] |= 1 << (curr_sym_off - 1);
+			} else if (curr_sym_off >= 33 && curr_sym_off <= 52)
+				pilot_mask[1] |= 1 << (curr_sym_off - 33);
+
+			/* Calculate magnitude mask (for viterbi decoder) */
+			if (curr_sym_off >= -1 && curr_sym_off <= 14)
+				mag_mask[0] |=
+					plt_mag_map << (curr_sym_off + 1) * 2;
+			else if (curr_sym_off >= 15 && curr_sym_off <= 30)
+				mag_mask[1] |=
+					plt_mag_map << (curr_sym_off - 15) * 2;
+			else if (curr_sym_off >= 31 && curr_sym_off <= 46)
+				mag_mask[2] |=
+					plt_mag_map << (curr_sym_off - 31) * 2;
+			else if (curr_sym_off >= 46 && curr_sym_off <= 53)
+				mag_mask[3] |=
+					plt_mag_map << (curr_sym_off - 47) * 2;
+
+		}
+
+		/* Write settings on hw to enable spur filter */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+					AR5K_PHY_BIN_MASK_CTL_RATE, 0xff);
+		/* XXX: Self correlator also ? */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+					AR5K_PHY_IQ_PILOT_MASK_EN |
+					AR5K_PHY_IQ_CHAN_MASK_EN |
+					AR5K_PHY_IQ_SPUR_FILT_EN);
+
+		/* Set delta phase and freq sigma delta */
+		ath5k_hw_reg_write(ah,
+				AR5K_REG_SM(spur_delta_phase,
+					AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE) |
+				AR5K_REG_SM(spur_freq_sigma_delta,
+				AR5K_PHY_TIMING_11_SPUR_FREQ_SD) |
+				AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC,
+				AR5K_PHY_TIMING_11);
+
+		/* Write pilot masks */
+		ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_7);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+					AR5K_PHY_TIMING_8_PILOT_MASK_2,
+					pilot_mask[1]);
+
+		ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_9);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+					AR5K_PHY_TIMING_10_PILOT_MASK_2,
+					pilot_mask[1]);
+
+		/* Write magnitude masks */
+		ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK_1);
+		ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK_2);
+		ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK_3);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+					AR5K_PHY_BIN_MASK_CTL_MASK_4,
+					mag_mask[3]);
+
+		ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK2_1);
+		ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK2_2);
+		ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK2_3);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+					AR5K_PHY_BIN_MASK2_4_MASK_4,
+					mag_mask[3]);
+
+	} else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) &
+	AR5K_PHY_IQ_SPUR_FILT_EN) {
+		/* Clean up spur mitigation settings and disable fliter */
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+					AR5K_PHY_BIN_MASK_CTL_RATE, 0);
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ,
+					AR5K_PHY_IQ_PILOT_MASK_EN |
+					AR5K_PHY_IQ_CHAN_MASK_EN |
+					AR5K_PHY_IQ_SPUR_FILT_EN);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_11);
+
+		/* Clear pilot masks */
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_7);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+					AR5K_PHY_TIMING_8_PILOT_MASK_2,
+					0);
+
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_9);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+					AR5K_PHY_TIMING_10_PILOT_MASK_2,
+					0);
+
+		/* Clear magnitude masks */
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_1);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_2);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_3);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+					AR5K_PHY_BIN_MASK_CTL_MASK_4,
+					0);
+
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_1);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_2);
+		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_3);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+					AR5K_PHY_BIN_MASK2_4_MASK_4,
+					0);
+	}
+}
+
+/********************\
+  Misc PHY functions
+\********************/
+
 int ath5k_hw_phy_disable(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
@@ -1365,10 +1613,6 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah)
 	return 0;
 }
 
-/********************\
-  Misc PHY functions
-\********************/
-
 /*
  * Get the PHY Chip revision
  */
@@ -1417,25 +1661,189 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan)
 	return ret;
 }
 
+/*****************\
+* Antenna control *
+\*****************/
+
 void /*TODO:Boundary check*/
-ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant)
+ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant)
 {
 	ATH5K_TRACE(ah->ah_sc);
-	/*Just a try M.F.*/
+
 	if (ah->ah_version != AR5K_AR5210)
-		ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA);
+		ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA);
 }
 
 unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
-	/*Just a try M.F.*/
+
 	if (ah->ah_version != AR5K_AR5210)
-		return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+		return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA) & 0x7;
 
 	return false; /*XXX: What do we return for 5210 ?*/
 }
 
+/*
+ * Enable/disable fast rx antenna diversity
+ */
+static void
+ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable)
+{
+	switch (ee_mode) {
+	case AR5K_EEPROM_MODE_11G:
+		/* XXX: This is set to
+		 * disabled on initvals !!! */
+	case AR5K_EEPROM_MODE_11A:
+		if (enable)
+			AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGCCTL,
+					AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+		else
+			AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+					AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+					AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+		break;
+	default:
+		return;
+	}
+
+	if (enable) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART,
+				AR5K_PHY_RESTART_DIV_GC, 0xc);
+
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV,
+					AR5K_PHY_FAST_ANT_DIV_EN);
+	} else {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART,
+				AR5K_PHY_RESTART_DIV_GC, 0x8);
+
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV,
+					AR5K_PHY_FAST_ANT_DIV_EN);
+	}
+}
+
+/*
+ * Set antenna operating mode
+ */
+void
+ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
+{
+	struct ieee80211_channel *channel = &ah->ah_current_channel;
+	bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div;
+	bool use_def_for_sg;
+	u8 def_ant, tx_ant, ee_mode;
+	u32 sta_id1 = 0;
+
+	def_ant = ah->ah_def_ant;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	switch (channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+	case CHANNEL_T:
+	case CHANNEL_XR:
+		ee_mode = AR5K_EEPROM_MODE_11A;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_TG:
+		ee_mode = AR5K_EEPROM_MODE_11G;
+		break;
+	case CHANNEL_B:
+		ee_mode = AR5K_EEPROM_MODE_11B;
+		break;
+	default:
+		ATH5K_ERR(ah->ah_sc,
+			"invalid channel: %d\n", channel->center_freq);
+		return;
+	}
+
+	switch (ant_mode) {
+	case AR5K_ANTMODE_DEFAULT:
+		tx_ant = 0;
+		use_def_for_tx = false;
+		update_def_on_tx = false;
+		use_def_for_rts = false;
+		use_def_for_sg = false;
+		fast_div = true;
+		break;
+	case AR5K_ANTMODE_FIXED_A:
+		def_ant = 1;
+		tx_ant = 0;
+		use_def_for_tx = true;
+		update_def_on_tx = false;
+		use_def_for_rts = true;
+		use_def_for_sg = true;
+		fast_div = false;
+		break;
+	case AR5K_ANTMODE_FIXED_B:
+		def_ant = 2;
+		tx_ant = 0;
+		use_def_for_tx = true;
+		update_def_on_tx = false;
+		use_def_for_rts = true;
+		use_def_for_sg = true;
+		fast_div = false;
+		break;
+	case AR5K_ANTMODE_SINGLE_AP:
+		def_ant = 1;	/* updated on tx */
+		tx_ant = 0;
+		use_def_for_tx = true;
+		update_def_on_tx = true;
+		use_def_for_rts = true;
+		use_def_for_sg = true;
+		fast_div = true;
+		break;
+	case AR5K_ANTMODE_SECTOR_AP:
+		tx_ant = 1;	/* variable */
+		use_def_for_tx = false;
+		update_def_on_tx = false;
+		use_def_for_rts = true;
+		use_def_for_sg = false;
+		fast_div = false;
+		break;
+	case AR5K_ANTMODE_SECTOR_STA:
+		tx_ant = 1;	/* variable */
+		use_def_for_tx = true;
+		update_def_on_tx = false;
+		use_def_for_rts = true;
+		use_def_for_sg = false;
+		fast_div = true;
+		break;
+	case AR5K_ANTMODE_DEBUG:
+		def_ant = 1;
+		tx_ant = 2;
+		use_def_for_tx = false;
+		update_def_on_tx = false;
+		use_def_for_rts = false;
+		use_def_for_sg = false;
+		fast_div = false;
+		break;
+	default:
+		return;
+	}
+
+	ah->ah_tx_ant = tx_ant;
+	ah->ah_ant_mode = ant_mode;
+
+	sta_id1 |= use_def_for_tx ? AR5K_STA_ID1_DEFAULT_ANTENNA : 0;
+	sta_id1 |= update_def_on_tx ? AR5K_STA_ID1_DESC_ANTENNA : 0;
+	sta_id1 |= use_def_for_rts ? AR5K_STA_ID1_RTS_DEF_ANTENNA : 0;
+	sta_id1 |= use_def_for_sg ? AR5K_STA_ID1_SELFGEN_DEF_ANT : 0;
+
+	AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_ANTENNA_SETTINGS);
+
+	if (sta_id1)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, sta_id1);
+
+	/* Note: set diversity before default antenna
+	 * because it won't work correctly */
+	ath5k_hw_set_fast_div(ah, ee_mode, fast_div);
+	ath5k_hw_set_def_antenna(ah, def_ant);
+}
+
 
 /****************\
 * TX power setup *
@@ -1489,6 +1897,9 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
 	s16 min_pwrL, min_pwrR;
 	s16 pwr_i;
 
+	if (WARN_ON(stepL[0] == stepL[1] || stepR[0] == stepR[1]))
+		return 0;
+
 	if (pwrL[0] == pwrL[1])
 		min_pwrL = pwrL[0];
 	else {
@@ -1750,8 +2161,6 @@ done:
  * Get the max edge power for this channel if
  * we have such data from EEPROM's Conformance Test
  * Limits (CTL), and limit max power if needed.
- *
- * FIXME: Only works for world regulatory domains
  */
 static void
 ath5k_get_max_ctl_power(struct ath5k_hw *ah,
@@ -1767,26 +2176,23 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
 	u8 ctl_idx = 0xFF;
 	u32 target = channel->center_freq;
 
-	/* Find out a CTL for our mode that's not mapped
-	 * on a specific reg domain.
-	 *
-	 * TODO: Map our current reg domain to one of the 3 available
-	 * reg domain ids so that we can support more CTLs. */
+	ctl_mode = ath_regd_get_band_ctl(&ah->ah_regulatory, channel->band);
+
 	switch (channel->hw_value & CHANNEL_MODES) {
 	case CHANNEL_A:
-		ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_11A;
 		break;
 	case CHANNEL_G:
-		ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_11G;
 		break;
 	case CHANNEL_B:
-		ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_11B;
 		break;
 	case CHANNEL_T:
-		ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_TURBO;
 		break;
 	case CHANNEL_TG:
-		ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN;
+		ctl_mode |= AR5K_CTL_TURBOG;
 		break;
 	case CHANNEL_XR:
 		/* Fall through */
@@ -2482,8 +2888,19 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
 		for (i = 8; i <= 15; i++)
 			rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
 
-	ah->ah_txpower.txp_min_pwr = rates[7];
-	ah->ah_txpower.txp_max_pwr = rates[0];
+	/* Now that we have all rates setup use table offset to
+	 * match the power range set by user with the power indices
+	 * on PCDAC/PDADC table */
+	for (i = 0; i < 16; i++) {
+		rates[i] += ah->ah_txpower.txp_offset;
+		/* Don't get out of bounds */
+		if (rates[i] > 63)
+			rates[i] = 63;
+	}
+
+	/* Min/max in 0.25dB units */
+	ah->ah_txpower.txp_min_pwr = 2 * rates[7];
+	ah->ah_txpower.txp_max_pwr = 2 * rates[0];
 	ah->ah_txpower.txp_ofdm = rates[7];
 }
 
@@ -2591,16 +3008,37 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 	return 0;
 }
 
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower)
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
 {
 	/*Just a try M.F.*/
 	struct ieee80211_channel *channel = &ah->ah_current_channel;
+	u8 ee_mode;
 
 	ATH5K_TRACE(ah->ah_sc);
+
+	switch (channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+	case CHANNEL_T:
+	case CHANNEL_XR:
+		ee_mode = AR5K_EEPROM_MODE_11A;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_TG:
+		ee_mode = AR5K_EEPROM_MODE_11G;
+		break;
+	case CHANNEL_B:
+		ee_mode = AR5K_EEPROM_MODE_11B;
+		break;
+	default:
+		ATH5K_ERR(ah->ah_sc,
+			"invalid channel: %d\n", channel->center_freq);
+		return -EINVAL;
+	}
+
 	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
 		"changing txpower to %d\n", txpower);
 
-	return ath5k_hw_txpower(ah, channel, mode, txpower);
+	return ath5k_hw_txpower(ah, channel, ee_mode, txpower);
 }
 
 #undef _ATH5K_PHY
diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 5094c394a4b..73407b3f53e 100644
--- a/drivers/net/wireless/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -160,7 +160,8 @@ u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
 	if (ah->ah_version == AR5K_AR5210)
 		return false;
 
-	pending = (AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT);
+	pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue));
+	pending &= AR5K_QCU_STS_FRMPENDCNT;
 
 	/* It's possible to have no frames pending even if TXE
 	 * is set. To indicate that q has not stopped return
@@ -401,14 +402,16 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
 				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
 				AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+				AR5K_DCU_MISC_ARBLOCK_IGNORE |
 				AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
 				AR5K_DCU_MISC_BCN_ENABLE);
 			break;
 
 		case AR5K_TX_QUEUE_CAB:
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_DBA_GT |
+				AR5K_QCU_MISC_FRSHED_BCN_SENT_GT |
 				AR5K_QCU_MISC_CBREXP_DIS |
+				AR5K_QCU_MISC_RDY_VEOL_POLICY |
 				AR5K_QCU_MISC_CBREXP_BCN_DIS);
 
 			ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 7070d1543cd..6809b54a2ad 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1148,6 +1148,11 @@
 #define AR5K_STA_ID1_CBCIV_ENDIAN	0x40000000	/* ??? */
 #define AR5K_STA_ID1_KEYSRCH_MCAST	0x80000000	/* Do key cache search for mcast frames */
 
+#define	AR5K_STA_ID1_ANTENNA_SETTINGS	(AR5K_STA_ID1_DEFAULT_ANTENNA | \
+					AR5K_STA_ID1_DESC_ANTENNA | \
+					AR5K_STA_ID1_RTS_DEF_ANTENNA | \
+					AR5K_STA_ID1_SELFGEN_DEF_ANT)
+
 /*
  * First BSSID register (MAC address, lower 32bits)
  */
@@ -2028,7 +2033,9 @@
 #define	AR5K_PHY_AGCCTL			0x9860			/* Register address */
 #define	AR5K_PHY_AGCCTL_CAL		0x00000001	/* Enable PHY calibration */
 #define	AR5K_PHY_AGCCTL_NF		0x00000002	/* Enable Noise Floor calibration */
+#define	AR5K_PHY_AGCCTL_OFDM_DIV_DIS	0x00000008	/* Disable antenna diversity on OFDM modes */
 #define	AR5K_PHY_AGCCTL_NF_EN		0x00008000	/* Enable nf calibration to happen (?) */
+#define	AR5K_PHY_AGCTL_FLTR_CAL		0x00010000	/* Allow filter calibration (?) */
 #define	AR5K_PHY_AGCCTL_NF_NOUPDATE	0x00020000	/* Don't update nf automaticaly */
 
 /*
@@ -2528,7 +2535,7 @@
  * PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
  */
 #define AR5K_PHY_CCK_CROSSCORR			0xa208
-#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000000f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000003f
 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S	0
 
 /* Same address is used for antenna diversity activation */
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 5f72c111c2e..bd0a97a38d3 100644
--- a/drivers/net/wireless/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -54,9 +54,8 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
 	u32 coef_scaled, coef_exp, coef_man,
 		ds_coef_exp, ds_coef_man, clock;
 
-	if (!(ah->ah_version == AR5K_AR5212) ||
-		!(channel->hw_value & CHANNEL_OFDM))
-		BUG();
+	BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
+		!(channel->hw_value & CHANNEL_OFDM));
 
 	/* Get coefficient
 	 * ALGO: coef = (5 * clock * carrier_freq) / 2)
@@ -508,7 +507,7 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
 
 		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
 			scal = AR5K_PHY_SCAL_32MHZ_2417;
-		else if (ath5k_eeprom_is_hb63(ah))
+		else if (ee->ee_is_hb63)
 			scal = AR5K_PHY_SCAL_32MHZ_HB63;
 		else
 			scal = AR5K_PHY_SCAL_32MHZ;
@@ -537,26 +536,6 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
 	return;
 }
 
-static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
-				struct ieee80211_channel *channel)
-{
-	u8 refclk_freq;
-
-	if ((ah->ah_radio == AR5K_RF5112) ||
-	(ah->ah_radio == AR5K_RF5413) ||
-	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
-		refclk_freq = 40;
-	else
-		refclk_freq = 32;
-
-	if ((channel->center_freq % refclk_freq != 0) &&
-	((channel->center_freq % refclk_freq < 10) ||
-	(channel->center_freq % refclk_freq > 22)))
-		return true;
-	else
-		return false;
-}
-
 /* TODO: Half/Quarter rate */
 static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
 				struct ieee80211_channel *channel)
@@ -599,9 +578,10 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
 	/* Set DAC/ADC delays */
 	if (ah->ah_version == AR5K_AR5212) {
 		u32 scal;
+		struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
 			scal = AR5K_PHY_SCAL_32MHZ_2417;
-		else if (ath5k_eeprom_is_hb63(ah))
+		else if (ee->ee_is_hb63)
 			scal = AR5K_PHY_SCAL_32MHZ_HB63;
 		else
 			scal = AR5K_PHY_SCAL_32MHZ;
@@ -698,13 +678,13 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 	/* Set antenna idle switch table */
 	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
 			AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
-			(ah->ah_antenna[ee_mode][0] |
+			(ah->ah_ant_ctl[ee_mode][0] |
 			AR5K_PHY_ANT_CTL_TXRX_EN));
 
-	/* Set antenna switch table */
-	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+	/* Set antenna switch tables */
+	ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[0]],
 		AR5K_PHY_ANT_SWITCH_TABLE_0);
-	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+	ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[1]],
 		AR5K_PHY_ANT_SWITCH_TABLE_1);
 
 	/* Noise floor threshold */
@@ -998,10 +978,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		ath5k_hw_tweak_initval_settings(ah, channel);
 
 		/*
-		 * Set TX power (FIXME)
+		 * Set TX power
 		 */
 		ret = ath5k_hw_txpower(ah, channel, ee_mode,
-					AR5K_TUNE_DEFAULT_TXPOWER);
+					ah->ah_txpower.txp_max_pwr / 2);
 		if (ret)
 			return ret;
 
@@ -1024,9 +1004,22 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		/* Write OFDM timings on 5212*/
 		if (ah->ah_version == AR5K_AR5212 &&
 			channel->hw_value & CHANNEL_OFDM) {
+			struct ath5k_eeprom_info *ee =
+					&ah->ah_capabilities.cap_eeprom;
+
 			ret = ath5k_hw_write_ofdm_timings(ah, channel);
 			if (ret)
 				return ret;
+
+			/* Note: According to docs we can have a newer
+			 * EEPROM on old hardware, so we need to verify
+			 * that our hardware is new enough to have spur
+			 * mitigation registers (delta phase etc) */
+			if (ah->ah_mac_srev >= AR5K_SREV_AR5424 ||
+			(ah->ah_mac_srev >= AR5K_SREV_AR5424 &&
+			ee->ee_version >= AR5K_EEPROM_VERSION_5_3))
+				ath5k_hw_set_spur_mitigation_filter(ah,
+								channel);
 		}
 
 		/*Enable/disable 802.11b mode on 5111
@@ -1042,17 +1035,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 
 		/*
 		 * In case a fixed antenna was set as default
-		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
-		 * registers.
+		 * use the same switch table twice.
 		 */
-		if (s_ant != 0) {
-			if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_A;
-			else	/* 2 - Aux */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_B;
-		} else {
-			ant[0] = AR5K_ANT_FIXED_A;
-			ant[1] = AR5K_ANT_FIXED_B;
+		if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A)
+				ant[0] = ant[1] = AR5K_ANT_SWTABLE_A;
+		else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B)
+				ant[0] = ant[1] = AR5K_ANT_SWTABLE_B;
+		else {
+			ant[0] = AR5K_ANT_SWTABLE_A;
+			ant[1] = AR5K_ANT_SWTABLE_B;
 		}
 
 		/* Commit values from EEPROM */
@@ -1260,6 +1251,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	 */
 	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
 
+	/* Restore antenna mode */
+	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
 
 	/*
 	 * Configure QCUs/DCUs
@@ -1311,23 +1304,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	if (ah->ah_version != AR5K_AR5210)
 		ath5k_hw_set_imr(ah, ah->ah_imr);
 
-	/*
-	 * Setup RFKill interrupt if rfkill flag is set on eeprom.
-	 * TODO: Use gpio pin and polarity infos from eeprom
-	 * TODO: Handle this in ath5k_intr because it'll result
-	 * 	 a nasty interrupt storm.
-	 */
-#if 0
-	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
-		ath5k_hw_set_gpio_input(ah, 0);
-		ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
-		if (ah->ah_gpio[0] == 0)
-			ath5k_hw_set_gpio_intr(ah, 0, 1);
-		else
-			ath5k_hw_set_gpio_intr(ah, 0, 0);
-	}
-#endif
-
 	/* Enable 32KHz clock function for AR5212+ chips
 	 * Set clocks to 32KHz operation and use an
 	 * external 32KHz crystal when sleeping if one
diff --git a/drivers/net/wireless/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h
index e50baff6617..e50baff6617 100644
--- a/drivers/net/wireless/ath5k/rfbuffer.h
+++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h
diff --git a/drivers/net/wireless/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h
index 1354d8c392c..1354d8c392c 100644
--- a/drivers/net/wireless/ath5k/rfgain.h
+++ b/drivers/net/wireless/ath/ath5k/rfgain.h
diff --git a/drivers/net/wireless/ath/ath5k/rfkill.c b/drivers/net/wireless/ath/ath5k/rfkill.c
new file mode 100644
index 00000000000..41a877b73fc
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/rfkill.c
@@ -0,0 +1,121 @@
+/*
+ * RFKILL support for ath5k
+ *
+ * Copyright (c) 2009 Tobias Doerffel <tobias.doerffel@gmail.com>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ *    redistribution must be conditioned upon including a substantially
+ *    similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include "base.h"
+
+
+static inline void ath5k_rfkill_disable(struct ath5k_softc *sc)
+{
+	ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "rfkill disable (gpio:%d polarity:%d)\n",
+		sc->rf_kill.gpio, sc->rf_kill.polarity);
+	ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio);
+	ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, !sc->rf_kill.polarity);
+}
+
+
+static inline void ath5k_rfkill_enable(struct ath5k_softc *sc)
+{
+	ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "rfkill enable (gpio:%d polarity:%d)\n",
+		sc->rf_kill.gpio, sc->rf_kill.polarity);
+	ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio);
+	ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, sc->rf_kill.polarity);
+}
+
+static inline void ath5k_rfkill_set_intr(struct ath5k_softc *sc, bool enable)
+{
+	struct ath5k_hw *ah = sc->ah;
+	u32 curval;
+
+	ath5k_hw_set_gpio_input(ah, sc->rf_kill.gpio);
+	curval = ath5k_hw_get_gpio(ah, sc->rf_kill.gpio);
+	ath5k_hw_set_gpio_intr(ah, sc->rf_kill.gpio, enable ?
+					!!curval : !curval);
+}
+
+static bool
+ath5k_is_rfkill_set(struct ath5k_softc *sc)
+{
+	/* configuring GPIO for input for some reason disables rfkill */
+	/*ath5k_hw_set_gpio_input(sc->ah, sc->rf_kill.gpio);*/
+	return ath5k_hw_get_gpio(sc->ah, sc->rf_kill.gpio) ==
+							sc->rf_kill.polarity;
+}
+
+static void
+ath5k_tasklet_rfkill_toggle(unsigned long data)
+{
+	struct ath5k_softc *sc = (void *)data;
+	bool blocked;
+
+	blocked = ath5k_is_rfkill_set(sc);
+	wiphy_rfkill_set_hw_state(sc->hw->wiphy, blocked);
+}
+
+
+void
+ath5k_rfkill_hw_start(struct ath5k_hw *ah)
+{
+	struct ath5k_softc *sc = ah->ah_sc;
+
+	/* read rfkill GPIO configuration from EEPROM header */
+	sc->rf_kill.gpio = ah->ah_capabilities.cap_eeprom.ee_rfkill_pin;
+	sc->rf_kill.polarity = ah->ah_capabilities.cap_eeprom.ee_rfkill_pol;
+
+	tasklet_init(&sc->rf_kill.toggleq, ath5k_tasklet_rfkill_toggle,
+		(unsigned long)sc);
+
+	ath5k_rfkill_disable(sc);
+
+	/* enable interrupt for rfkill switch */
+	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header))
+		ath5k_rfkill_set_intr(sc, true);
+}
+
+
+void
+ath5k_rfkill_hw_stop(struct ath5k_hw *ah)
+{
+	struct ath5k_softc *sc = ah->ah_sc;
+
+	/* disable interrupt for rfkill switch */
+	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header))
+		ath5k_rfkill_set_intr(sc, false);
+
+	tasklet_kill(&sc->rf_kill.toggleq);
+
+	/* enable RFKILL when stopping HW so Wifi LED is turned off */
+	ath5k_rfkill_enable(sc);
+}
+
diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 90a8dd87378..0ed1ac312aa 100644
--- a/drivers/net/wireless/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -2,6 +2,7 @@ config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211
 	depends on RFKILL || RFKILL=n
+	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 1a4d4eab6fe..783bc39eb2f 100644
--- a/drivers/net/wireless/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -4,7 +4,6 @@ ath9k-y +=	hw.o \
 		calib.o \
 		ani.o \
 		phy.o \
-		regd.o \
 		beacon.o \
 		main.o \
 		recv.o \
diff --git a/drivers/net/wireless/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 0e65c51ba17..0e65c51ba17 100644
--- a/drivers/net/wireless/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
diff --git a/drivers/net/wireless/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 6c5e887d50d..1aeafb511dd 100644
--- a/drivers/net/wireless/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -569,8 +569,7 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah,
 				DPRINTF(ah->ah_sc, ATH_DBG_ANI,
 					"phyCnt1 0x%x, resetting "
 					"counter value to 0x%x\n",
-					phyCnt1,
-					aniState->ofdmPhyErrBase);
+					phyCnt1, aniState->ofdmPhyErrBase);
 				REG_WRITE(ah, AR_PHY_ERR_1,
 					  aniState->ofdmPhyErrBase);
 				REG_WRITE(ah, AR_PHY_ERR_MASK_1,
@@ -580,8 +579,7 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah,
 				DPRINTF(ah->ah_sc, ATH_DBG_ANI,
 					"phyCnt2 0x%x, resetting "
 					"counter value to 0x%x\n",
-					phyCnt2,
-					aniState->cckPhyErrBase);
+					phyCnt2, aniState->cckPhyErrBase);
 				REG_WRITE(ah, AR_PHY_ERR_2,
 					  aniState->cckPhyErrBase);
 				REG_WRITE(ah, AR_PHY_ERR_MASK_2,
@@ -667,7 +665,7 @@ u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hw *ah,
 	u32 cc = REG_READ(ah, AR_CCCNT);
 
 	if (cycles == 0 || cycles > cc) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
 			"cycle counter wrap. ExtBusy = 0\n");
 		good = 0;
 	} else {
diff --git a/drivers/net/wireless/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 08b4e7ed5ff..08b4e7ed5ff 100644
--- a/drivers/net/wireless/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 2689a08a284..515880aa211 100644
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -53,11 +53,7 @@ struct ath_node;
 
 #define A_MAX(a, b) ((a) > (b) ? (a) : (b))
 
-#define ASSERT(exp) do {			\
-		if (unlikely(!(exp))) {		\
-			BUG();			\
-		}				\
-	} while (0)
+#define ASSERT(exp) BUG_ON(!(exp))
 
 #define TSF_TO_TU(_h,_l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
@@ -70,7 +66,6 @@ struct ath_config {
 	u32 ath_aggr_prot;
 	u16 txpowlimit;
 	u8 cabqReadytime;
-	u8 swBeaconProcess;
 };
 
 /*************************/
@@ -78,13 +73,17 @@ struct ath_config {
 /*************************/
 
 #define ATH_TXBUF_RESET(_bf) do {				\
-		(_bf)->bf_status = 0;				\
+		(_bf)->bf_stale = false;			\
 		(_bf)->bf_lastbf = NULL;			\
 		(_bf)->bf_next = NULL;				\
 		memset(&((_bf)->bf_state), 0,			\
 		       sizeof(struct ath_buf_state));		\
 	} while (0)
 
+#define ATH_RXBUF_RESET(_bf) do {		\
+		(_bf)->bf_stale = false;	\
+	} while (0)
+
 /**
  * enum buffer_type - Buffer type flags
  *
@@ -110,7 +109,7 @@ struct ath_buf_state {
 	int bfs_seqno;
 	int bfs_tidno;
 	int bfs_retries;
-	u32 bf_type;
+	u8 bf_type;
 	u32 bfs_keyix;
 	enum ath9k_key_type bfs_keytype;
 };
@@ -134,26 +133,21 @@ struct ath_buf {
 	struct ath_buf *bf_lastbf;	/* last buf of this unit (a frame or
 					   an aggregate) */
 	struct ath_buf *bf_next;	/* next subframe in the aggregate */
-	void *bf_mpdu;			/* enclosing frame structure */
+	struct sk_buff *bf_mpdu;	/* enclosing frame structure */
 	struct ath_desc *bf_desc;	/* virtual addr of desc */
 	dma_addr_t bf_daddr;		/* physical addr of desc */
 	dma_addr_t bf_buf_addr;		/* physical addr of data buffer */
-	u32 bf_status;
+	bool bf_stale;
 	u16 bf_flags;
 	struct ath_buf_state bf_state;
 	dma_addr_t bf_dmacontext;
 };
 
-#define ATH_RXBUF_RESET(_bf)    ((_bf)->bf_status = 0)
-#define ATH_BUFSTATUS_STALE     0x00000002
-
 struct ath_descdma {
-	const char *dd_name;
 	struct ath_desc *dd_desc;
 	dma_addr_t dd_desc_paddr;
 	u32 dd_desc_len;
 	struct ath_buf *dd_bufptr;
-	dma_addr_t dd_dmacontext;
 };
 
 int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
@@ -299,26 +293,6 @@ struct ath_tx_control {
 #define ATH_TX_XRETRY       0x02
 #define ATH_TX_BAR          0x04
 
-/* All RSSI values are noise floor adjusted */
-struct ath_tx_stat {
-	int rssi;
-	int rssictl[ATH_MAX_ANTENNA];
-	int rssiextn[ATH_MAX_ANTENNA];
-	int rateieee;
-	int rateKbps;
-	int ratecode;
-	int flags;
-	u32 airtime;	/* time on air per final tx rate */
-};
-
-struct aggr_rifs_param {
-	int param_max_frames;
-	int param_max_len;
-	int param_rl;
-	int param_al;
-	struct ath_rc_series *param_rcs;
-};
-
 struct ath_node {
 	struct ath_softc *an_sc;
 	struct ath_atx_tid tid[WME_NUM_TID];
@@ -366,7 +340,7 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
 void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an);
 void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq);
 int ath_tx_init(struct ath_softc *sc, int nbufs);
-int ath_tx_cleanup(struct ath_softc *sc);
+void ath_tx_cleanup(struct ath_softc *sc);
 struct ath_txq *ath_test_get_txq(struct ath_softc *sc, struct sk_buff *skb);
 int ath_txq_update(struct ath_softc *sc, int qnum,
 		   struct ath9k_tx_queue_info *q);
@@ -486,12 +460,9 @@ struct ath_led {
 	bool registered;
 };
 
-/* Rfkill */
-#define ATH_RFKILL_POLL_INTERVAL	2000 /* msecs */
-
 struct ath_rfkill {
 	struct rfkill *rfkill;
-	struct delayed_work rfkill_poll;
+	struct rfkill_ops ops;
 	char rfkill_name[32];
 };
 
@@ -529,19 +500,20 @@ struct ath_rfkill {
 #define SC_OP_BEACONS           BIT(1)
 #define SC_OP_RXAGGR            BIT(2)
 #define SC_OP_TXAGGR            BIT(3)
-#define SC_OP_CHAINMASK_UPDATE  BIT(4)
-#define SC_OP_FULL_RESET        BIT(5)
-#define SC_OP_PREAMBLE_SHORT    BIT(6)
-#define SC_OP_PROTECT_ENABLE    BIT(7)
-#define SC_OP_RXFLUSH           BIT(8)
-#define SC_OP_LED_ASSOCIATED    BIT(9)
-#define SC_OP_RFKILL_REGISTERED BIT(10)
-#define SC_OP_RFKILL_SW_BLOCKED BIT(11)
-#define SC_OP_RFKILL_HW_BLOCKED BIT(12)
-#define SC_OP_WAIT_FOR_BEACON   BIT(13)
-#define SC_OP_LED_ON            BIT(14)
-#define SC_OP_SCANNING          BIT(15)
-#define SC_OP_TSF_RESET         BIT(16)
+#define SC_OP_FULL_RESET        BIT(4)
+#define SC_OP_PREAMBLE_SHORT    BIT(5)
+#define SC_OP_PROTECT_ENABLE    BIT(6)
+#define SC_OP_RXFLUSH           BIT(7)
+#define SC_OP_LED_ASSOCIATED    BIT(8)
+#define SC_OP_RFKILL_REGISTERED BIT(9)
+#define SC_OP_WAIT_FOR_BEACON   BIT(12)
+#define SC_OP_LED_ON            BIT(13)
+#define SC_OP_SCANNING          BIT(14)
+#define SC_OP_TSF_RESET         BIT(15)
+#define SC_OP_WAIT_FOR_CAB      BIT(16)
+#define SC_OP_WAIT_FOR_PSPOLL_DATA BIT(17)
+#define SC_OP_WAIT_FOR_TX_ACK   BIT(18)
+#define SC_OP_BEACON_SYNC       BIT(19)
 
 struct ath_bus_ops {
 	void		(*read_cachesize)(struct ath_softc *sc, int *csz);
@@ -603,8 +575,8 @@ struct ath_softc {
 	struct ath_tx tx;
 	struct ath_beacon beacon;
 	struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX];
-	struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
-	struct ath_rate_table *cur_rate_table;
+	const struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
+	const struct ath_rate_table *cur_rate_table;
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 
 	struct ath_led radio_led;
@@ -617,6 +589,8 @@ struct ath_softc {
 	int led_on_cnt;
 	int led_off_cnt;
 
+	int beacon_interval;
+
 	struct ath_rfkill rf_kill;
 	struct ath_ani ani;
 	struct ath9k_node_stats nodestats;
@@ -624,6 +598,7 @@ struct ath_softc {
 	struct ath9k_debug debug;
 #endif
 	struct ath_bus_ops *bus_ops;
+	struct ath_beacon_config cur_beacon_conf;
 };
 
 struct ath_wiphy {
@@ -701,7 +676,9 @@ static inline void ath9k_ps_restore(struct ath_softc *sc)
 {
 	if (atomic_dec_and_test(&sc->ps_usecount))
 		if ((sc->hw->conf.flags & IEEE80211_CONF_PS) &&
-		    !(sc->sc_flags & SC_OP_WAIT_FOR_BEACON))
+		    !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+				      SC_OP_WAIT_FOR_PSPOLL_DATA |
+				      SC_OP_WAIT_FOR_TX_ACK)))
 			ath9k_hw_setpower(sc->sc_ah,
 					  sc->sc_ah->restore_mode);
 }
@@ -722,36 +699,7 @@ void ath9k_wiphy_pause_all_forced(struct ath_softc *sc,
 bool ath9k_wiphy_scanning(struct ath_softc *sc);
 void ath9k_wiphy_work(struct work_struct *work);
 
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-static inline void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
-{
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-		iowrite32(val, ah->ah_sc->mem + reg_offset);
-		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-	} else
-		iowrite32(val, ah->ah_sc->mem + reg_offset);
-}
-
-static inline unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
-{
-	u32 val;
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-		val = ioread32(ah->ah_sc->mem + reg_offset);
-		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-	} else
-		val = ioread32(ah->ah_sc->mem + reg_offset);
-	return val;
-}
+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);
 
 #endif /* ATH9K_H */
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index ec995730632..3639a2e6987 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -43,7 +43,7 @@ static int ath_beaconq_config(struct ath_softc *sc)
 
 	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
 		DPRINTF(sc, ATH_DBG_FATAL,
-			"unable to update h/w beacon queue parameters\n");
+			"Unable to update h/w beacon queue parameters\n");
 		return 0;
 	} else {
 		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
@@ -59,11 +59,11 @@ static int ath_beaconq_config(struct ath_softc *sc)
 static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
 			     struct ath_buf *bf)
 {
-	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+	struct sk_buff *skb = bf->bf_mpdu;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_desc *ds;
 	struct ath9k_11n_rate_series series[4];
-	struct ath_rate_table *rt;
+	const struct ath_rate_table *rt;
 	int flags, antenna, ctsrate = 0, ctsduration = 0;
 	u8 rate;
 
@@ -132,16 +132,13 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
 	avp = (void *)vif->drv_priv;
 	cabq = sc->beacon.cabq;
 
-	if (avp->av_bcbuf == NULL) {
-		DPRINTF(sc, ATH_DBG_BEACON, "avp=%p av_bcbuf=%p\n",
-			avp, avp->av_bcbuf);
+	if (avp->av_bcbuf == NULL)
 		return NULL;
-	}
 
 	/* Release the old beacon first */
 
 	bf = avp->av_bcbuf;
-	skb = (struct sk_buff *)bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 	if (skb) {
 		dma_unmap_single(sc->dev, bf->bf_dmacontext,
 				 skb->len, DMA_TO_DEVICE);
@@ -229,7 +226,7 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc,
 		return;
 
 	bf = avp->av_bcbuf;
-	skb = (struct sk_buff *) bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 
 	ath_beacon_setup(sc, avp, bf);
 
@@ -302,7 +299,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 	/* release the previous beacon frame, if it already exists. */
 	bf = avp->av_bcbuf;
 	if (bf->bf_mpdu != NULL) {
-		skb = (struct sk_buff *)bf->bf_mpdu;
+		skb = bf->bf_mpdu;
 		dma_unmap_single(sc->dev, bf->bf_dmacontext,
 				 skb->len, DMA_TO_DEVICE);
 		dev_kfree_skb_any(skb);
@@ -323,8 +320,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 		u64 tsfadjust;
 		int intval;
 
-		intval = sc->hw->conf.beacon_int ?
-			sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+		intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
 
 		/*
 		 * Calculate the TSF offset for this beacon slot, i.e., the
@@ -374,7 +370,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp)
 
 		bf = avp->av_bcbuf;
 		if (bf->bf_mpdu != NULL) {
-			struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+			struct sk_buff *skb = bf->bf_mpdu;
 			dma_unmap_single(sc->dev, bf->bf_dmacontext,
 					 skb->len, DMA_TO_DEVICE);
 			dev_kfree_skb_any(skb);
@@ -415,6 +411,7 @@ void ath_beacon_tasklet(unsigned long data)
 		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
 			DPRINTF(sc, ATH_DBG_BEACON,
 				"beacon is officially stuck\n");
+			sc->sc_flags |= SC_OP_TSF_RESET;
 			ath_reset(sc, false);
 		}
 
@@ -434,8 +431,7 @@ void ath_beacon_tasklet(unsigned long data)
 	 * on the tsf to safeguard against missing an swba.
 	 */
 
-	intval = sc->hw->conf.beacon_int ?
-		sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+	intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
 
 	tsf = ath9k_hw_gettsf64(ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf);
@@ -512,8 +508,7 @@ void ath_beacon_tasklet(unsigned long data)
  * slot. Slots that are not occupied will generate nothing.
  */
 static void ath_beacon_config_ap(struct ath_softc *sc,
-				 struct ath_beacon_config *conf,
-				 struct ath_vif *avp)
+				 struct ath_beacon_config *conf)
 {
 	u32 nexttbtt, intval;
 
@@ -558,14 +553,14 @@ static void ath_beacon_config_ap(struct ath_softc *sc,
  * we've associated with.
  */
 static void ath_beacon_config_sta(struct ath_softc *sc,
-				  struct ath_beacon_config *conf,
-				  struct ath_vif *avp)
+				  struct ath_beacon_config *conf)
 {
 	struct ath9k_beacon_state bs;
 	int dtimperiod, dtimcount, sleepduration;
 	int cfpperiod, cfpcount;
 	u32 nexttbtt = 0, intval, tsftu;
 	u64 tsf;
+	int num_beacons, offset, dtim_dec_count, cfp_dec_count;
 
 	memset(&bs, 0, sizeof(bs));
 	intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
@@ -593,14 +588,27 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	 */
 	tsf = ath9k_hw_gettsf64(sc->sc_ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
-	do {
+
+	num_beacons = tsftu / intval + 1;
+	offset = tsftu % intval;
+	nexttbtt = tsftu - offset;
+	if (offset)
 		nexttbtt += intval;
-		if (--dtimcount < 0) {
-			dtimcount = dtimperiod - 1;
-			if (--cfpcount < 0)
-				cfpcount = cfpperiod - 1;
-		}
-	} while (nexttbtt < tsftu);
+
+	/* DTIM Beacon every dtimperiod Beacon */
+	dtim_dec_count = num_beacons % dtimperiod;
+	/* CFP every cfpperiod DTIM Beacon */
+	cfp_dec_count = (num_beacons / dtimperiod) % cfpperiod;
+	if (dtim_dec_count)
+		cfp_dec_count++;
+
+	dtimcount -= dtim_dec_count;
+	if (dtimcount < 0)
+		dtimcount += dtimperiod;
+
+	cfpcount -= cfp_dec_count;
+	if (cfpcount < 0)
+		cfpcount += cfpperiod;
 
 	bs.bs_intval = intval;
 	bs.bs_nexttbtt = nexttbtt;
@@ -659,7 +667,6 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 
 static void ath_beacon_config_adhoc(struct ath_softc *sc,
 				    struct ath_beacon_config *conf,
-				    struct ath_vif *avp,
 				    struct ieee80211_vif *vif)
 {
 	u64 tsf;
@@ -667,6 +674,14 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 
 	intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
 
+	/*
+	 * It looks like mac80211 may end up using beacon interval of zero in
+	 * some cases (at least for mesh point). Avoid getting into an
+	 * infinite loop by using a bit safer value instead..
+	 */
+	if (intval == 0)
+		intval = 100;
+
 	/* Pull nexttbtt forward to reflect the current TSF */
 
 	nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
@@ -703,44 +718,50 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
+	/* FIXME: Handle properly when vif is NULL */
+	if (vif && sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
 		ath_beacon_start_adhoc(sc, vif);
 }
 
 void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 {
-	struct ath_beacon_config conf;
+	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
+	enum nl80211_iftype iftype;
 
 	/* Setup the beacon configuration parameters */
 
-	memset(&conf, 0, sizeof(struct ath_beacon_config));
-	conf.beacon_interval = sc->hw->conf.beacon_int ?
-		sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
-	conf.listen_interval = 1;
-	conf.dtim_period = conf.beacon_interval;
-	conf.dtim_count = 1;
-	conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
-
 	if (vif) {
-		struct ath_vif *avp = (struct ath_vif *)vif->drv_priv;
-
-		switch(avp->av_opmode) {
-		case NL80211_IFTYPE_AP:
-			ath_beacon_config_ap(sc, &conf, avp);
-			break;
-		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_MESH_POINT:
-			ath_beacon_config_adhoc(sc, &conf, avp, vif);
-			break;
-		case NL80211_IFTYPE_STATION:
-			ath_beacon_config_sta(sc, &conf, avp);
-			break;
-		default:
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"Unsupported beaconing mode\n");
-			return;
-		}
+		struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+
+		iftype = vif->type;
+
+		cur_conf->beacon_interval = bss_conf->beacon_int;
+		cur_conf->dtim_period = bss_conf->dtim_period;
+		cur_conf->listen_interval = 1;
+		cur_conf->dtim_count = 1;
+		cur_conf->bmiss_timeout =
+			ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval;
+	} else {
+		iftype = sc->sc_ah->opmode;
+	}
+
 
-		sc->sc_flags |= SC_OP_BEACONS;
+	switch (iftype) {
+	case NL80211_IFTYPE_AP:
+		ath_beacon_config_ap(sc, cur_conf);
+		break;
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MESH_POINT:
+		ath_beacon_config_adhoc(sc, cur_conf, vif);
+		break;
+	case NL80211_IFTYPE_STATION:
+		ath_beacon_config_sta(sc, cur_conf);
+		break;
+	default:
+		DPRINTF(sc, ATH_DBG_CONFIG,
+			"Unsupported beaconing mode\n");
+		return;
 	}
+
+	sc->sc_flags |= SC_OP_BEACONS;
 }
diff --git a/drivers/net/wireless/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index e2d62e97131..a32d7e7fecb 100644
--- a/drivers/net/wireless/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -186,7 +186,7 @@ static bool getNoiseFloorThresh(struct ath_hw *ah,
 }
 
 static void ath9k_hw_setup_calibration(struct ath_hw *ah,
-				       struct hal_cal_list *currCal)
+				       struct ath9k_cal_list *currCal)
 {
 	REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
 		      AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
@@ -220,7 +220,7 @@ static void ath9k_hw_setup_calibration(struct ath_hw *ah,
 }
 
 static void ath9k_hw_reset_calibration(struct ath_hw *ah,
-				       struct hal_cal_list *currCal)
+				       struct ath9k_cal_list *currCal)
 {
 	int i;
 
@@ -238,13 +238,12 @@ static void ath9k_hw_reset_calibration(struct ath_hw *ah,
 	ah->cal_samples = 0;
 }
 
-static void ath9k_hw_per_calibration(struct ath_hw *ah,
+static bool ath9k_hw_per_calibration(struct ath_hw *ah,
 				     struct ath9k_channel *ichan,
 				     u8 rxchainmask,
-				     struct hal_cal_list *currCal,
-				     bool *isCalDone)
+				     struct ath9k_cal_list *currCal)
 {
-	*isCalDone = false;
+	bool iscaldone = false;
 
 	if (currCal->calState == CAL_RUNNING) {
 		if (!(REG_READ(ah, AR_PHY_TIMING_CTRL4(0)) &
@@ -263,7 +262,7 @@ static void ath9k_hw_per_calibration(struct ath_hw *ah,
 				currCal->calData->calPostProc(ah, numChains);
 				ichan->CalValid |= currCal->calData->calType;
 				currCal->calState = CAL_DONE;
-				*isCalDone = true;
+				iscaldone = true;
 			} else {
 				ath9k_hw_setup_calibration(ah, currCal);
 			}
@@ -271,11 +270,13 @@ static void ath9k_hw_per_calibration(struct ath_hw *ah,
 	} else if (!(ichan->CalValid & currCal->calData->calType)) {
 		ath9k_hw_reset_calibration(ah, currCal);
 	}
+
+	return iscaldone;
 }
 
 /* Assumes you are talking about the currently configured channel */
 static bool ath9k_hw_iscal_supported(struct ath_hw *ah,
-				     enum hal_cal_types calType)
+				     enum ath9k_cal_types calType)
 {
 	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
 
@@ -284,8 +285,8 @@ static bool ath9k_hw_iscal_supported(struct ath_hw *ah,
 		return true;
 	case ADC_GAIN_CAL:
 	case ADC_DC_CAL:
-		if (conf->channel->band == IEEE80211_BAND_5GHZ &&
-		  conf_is_ht20(conf))
+		if (!(conf->channel->band == IEEE80211_BAND_2GHZ &&
+		      conf_is_ht20(conf)))
 			return true;
 		break;
 	}
@@ -498,7 +499,7 @@ static void ath9k_hw_adc_dccal_calibrate(struct ath_hw *ah, u8 numChains)
 {
 	u32 iOddMeasOffset, iEvenMeasOffset, val, i;
 	int32_t qOddMeasOffset, qEvenMeasOffset, qDcMismatch, iDcMismatch;
-	const struct hal_percal_data *calData =
+	const struct ath9k_percal_data *calData =
 		ah->cal_list_curr->calData;
 	u32 numSamples =
 		(1 << (calData->calCountMax + 5)) * calData->calNumSamples;
@@ -555,7 +556,7 @@ static void ath9k_hw_adc_dccal_calibrate(struct ath_hw *ah, u8 numChains)
 bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 {
 	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
-	struct hal_cal_list *currCal = ah->cal_list_curr;
+	struct ath9k_cal_list *currCal = ah->cal_list_curr;
 
 	if (!ah->curchan)
 		return true;
@@ -841,30 +842,28 @@ static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah)
 }
 
 bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
-			u8 rxchainmask, bool longcal,
-			bool *isCalDone)
+			u8 rxchainmask, bool longcal)
 {
-	struct hal_cal_list *currCal = ah->cal_list_curr;
-
-	*isCalDone = true;
+	bool iscaldone = true;
+	struct ath9k_cal_list *currCal = ah->cal_list_curr;
 
 	if (currCal &&
 	    (currCal->calState == CAL_RUNNING ||
 	     currCal->calState == CAL_WAITING)) {
-		ath9k_hw_per_calibration(ah, chan, rxchainmask, currCal,
-					 isCalDone);
-		if (*isCalDone) {
+		iscaldone = ath9k_hw_per_calibration(ah, chan,
+						     rxchainmask, currCal);
+		if (iscaldone) {
 			ah->cal_list_curr = currCal = currCal->calNext;
 
 			if (currCal->calState == CAL_WAITING) {
-				*isCalDone = false;
+				iscaldone = false;
 				ath9k_hw_reset_calibration(ah, currCal);
 			}
 		}
 	}
 
 	if (longcal) {
-		if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah))
+		if (AR_SREV_9285_11_OR_LATER(ah))
 			ath9k_hw_9285_pa_cal(ah);
 
 		if (OLC_FOR_AR9280_20_LATER)
@@ -872,18 +871,15 @@ bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
 		ath9k_hw_getnf(ah, chan);
 		ath9k_hw_loadnf(ah, ah->curchan);
 		ath9k_hw_start_nfcal(ah);
-
-		if (chan->channelFlags & CHANNEL_CW_INT)
-			chan->channelFlags &= ~CHANNEL_CW_INT;
 	}
 
-	return true;
+	return iscaldone;
 }
 
 static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
-	if (chan->channelFlags & CHANNEL_HT20) {
+	if (IS_CHAN_HT20(chan)) {
 		REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_PARALLEL_CAL_ENABLE);
 		REG_SET_BIT(ah, AR_PHY_TURBO, AR_PHY_FC_DYN2040_EN);
 		REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
@@ -919,83 +915,66 @@ static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 	return true;
 }
 
-bool ath9k_hw_init_cal(struct ath_hw *ah,
-		       struct ath9k_channel *chan)
+bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 {
-	if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) {
+	if (AR_SREV_9285_12_OR_LATER(ah)) {
 		if (!ar9285_clc(ah, chan))
 			return false;
-	} else if (AR_SREV_9280_10_OR_LATER(ah)) {
-		REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
-		REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
+	} else {
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
+			REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		}
 
-		/* Kick off the cal */
+		/* Calibrate the AGC */
 		REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-				REG_READ(ah, AR_PHY_AGC_CONTROL) |
-				AR_PHY_AGC_CONTROL_CAL);
+			  REG_READ(ah, AR_PHY_AGC_CONTROL) |
+			  AR_PHY_AGC_CONTROL_CAL);
 
-		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
-					AR_PHY_AGC_CONTROL_CAL, 0,
-					AH_WAIT_TIMEOUT)) {
+		/* Poll for offset calibration complete */
+		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
+				   0, AH_WAIT_TIMEOUT)) {
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
 				"offset calibration failed to complete in 1ms; "
 				"noisy environment?\n");
 			return false;
 		}
 
-		REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
-		REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
-	}
-
-	/* Calibrate the AGC */
-	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-			REG_READ(ah, AR_PHY_AGC_CONTROL) |
-			AR_PHY_AGC_CONTROL_CAL);
-
-	if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
-				0, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"offset calibration failed to complete in 1ms; "
-			"noisy environment?\n");
-		return false;
-	}
-
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
-		REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		if (AR_SREV_9280_10_OR_LATER(ah)) {
+			REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
+			REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+		}
 	}
 
 	/* Do PA Calibration */
-	if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah))
+	if (AR_SREV_9285_11_OR_LATER(ah))
 		ath9k_hw_9285_pa_cal(ah);
 
-	/* Do NF Calibration */
+	/* Do NF Calibration after DC offset and other calibrations */
 	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-			REG_READ(ah, AR_PHY_AGC_CONTROL) |
-			AR_PHY_AGC_CONTROL_NF);
+		  REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_NF);
 
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
 
+	/* Enable IQ, ADC Gain and ADC DC offset CALs */
 	if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
 		if (ath9k_hw_iscal_supported(ah, ADC_GAIN_CAL)) {
 			INIT_CAL(&ah->adcgain_caldata);
 			INSERT_CAL(ah, &ah->adcgain_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling ADC Gain Calibration.\n");
+				"enabling ADC Gain Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, ADC_DC_CAL)) {
 			INIT_CAL(&ah->adcdc_caldata);
 			INSERT_CAL(ah, &ah->adcdc_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling ADC DC Calibration.\n");
+				"enabling ADC DC Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, IQ_MISMATCH_CAL)) {
 			INIT_CAL(&ah->iq_caldata);
 			INSERT_CAL(ah, &ah->iq_caldata);
 			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-					"enabling IQ Calibration.\n");
+				"enabling IQ Calibration.\n");
 		}
 
 		ah->cal_list_curr = ah->cal_list;
@@ -1009,49 +988,49 @@ bool ath9k_hw_init_cal(struct ath_hw *ah,
 	return true;
 }
 
-const struct hal_percal_data iq_cal_multi_sample = {
+const struct ath9k_percal_data iq_cal_multi_sample = {
 	IQ_MISMATCH_CAL,
 	MAX_CAL_SAMPLES,
 	PER_MIN_LOG_COUNT,
 	ath9k_hw_iqcal_collect,
 	ath9k_hw_iqcalibrate
 };
-const struct hal_percal_data iq_cal_single_sample = {
+const struct ath9k_percal_data iq_cal_single_sample = {
 	IQ_MISMATCH_CAL,
 	MIN_CAL_SAMPLES,
 	PER_MAX_LOG_COUNT,
 	ath9k_hw_iqcal_collect,
 	ath9k_hw_iqcalibrate
 };
-const struct hal_percal_data adc_gain_cal_multi_sample = {
+const struct ath9k_percal_data adc_gain_cal_multi_sample = {
 	ADC_GAIN_CAL,
 	MAX_CAL_SAMPLES,
 	PER_MIN_LOG_COUNT,
 	ath9k_hw_adc_gaincal_collect,
 	ath9k_hw_adc_gaincal_calibrate
 };
-const struct hal_percal_data adc_gain_cal_single_sample = {
+const struct ath9k_percal_data adc_gain_cal_single_sample = {
 	ADC_GAIN_CAL,
 	MIN_CAL_SAMPLES,
 	PER_MAX_LOG_COUNT,
 	ath9k_hw_adc_gaincal_collect,
 	ath9k_hw_adc_gaincal_calibrate
 };
-const struct hal_percal_data adc_dc_cal_multi_sample = {
+const struct ath9k_percal_data adc_dc_cal_multi_sample = {
 	ADC_DC_CAL,
 	MAX_CAL_SAMPLES,
 	PER_MIN_LOG_COUNT,
 	ath9k_hw_adc_dccal_collect,
 	ath9k_hw_adc_dccal_calibrate
 };
-const struct hal_percal_data adc_dc_cal_single_sample = {
+const struct ath9k_percal_data adc_dc_cal_single_sample = {
 	ADC_DC_CAL,
 	MIN_CAL_SAMPLES,
 	PER_MAX_LOG_COUNT,
 	ath9k_hw_adc_dccal_collect,
 	ath9k_hw_adc_dccal_calibrate
 };
-const struct hal_percal_data adc_init_dc_cal = {
+const struct ath9k_percal_data adc_init_dc_cal = {
 	ADC_DC_INIT_CAL,
 	MIN_CAL_SAMPLES,
 	INIT_LOG_COUNT,
diff --git a/drivers/net/wireless/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 1c74bd50700..fe5367f1414 100644
--- a/drivers/net/wireless/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -17,13 +17,13 @@
 #ifndef CALIB_H
 #define CALIB_H
 
-extern const struct hal_percal_data iq_cal_multi_sample;
-extern const struct hal_percal_data iq_cal_single_sample;
-extern const struct hal_percal_data adc_gain_cal_multi_sample;
-extern const struct hal_percal_data adc_gain_cal_single_sample;
-extern const struct hal_percal_data adc_dc_cal_multi_sample;
-extern const struct hal_percal_data adc_dc_cal_single_sample;
-extern const struct hal_percal_data adc_init_dc_cal;
+extern const struct ath9k_percal_data iq_cal_multi_sample;
+extern const struct ath9k_percal_data iq_cal_single_sample;
+extern const struct ath9k_percal_data adc_gain_cal_multi_sample;
+extern const struct ath9k_percal_data adc_gain_cal_single_sample;
+extern const struct ath9k_percal_data adc_dc_cal_multi_sample;
+extern const struct ath9k_percal_data adc_dc_cal_single_sample;
+extern const struct ath9k_percal_data adc_init_dc_cal;
 
 #define AR_PHY_CCA_MAX_GOOD_VALUE      		-85
 #define AR_PHY_CCA_MAX_HIGH_VALUE      		-62
@@ -67,14 +67,14 @@ struct ar5416IniArray {
 		}							\
 	} while (0)
 
-enum hal_cal_types {
+enum ath9k_cal_types {
 	ADC_DC_INIT_CAL = 0x1,
 	ADC_GAIN_CAL = 0x2,
 	ADC_DC_CAL = 0x4,
 	IQ_MISMATCH_CAL = 0x8
 };
 
-enum hal_cal_state {
+enum ath9k_cal_state {
 	CAL_INACTIVE,
 	CAL_WAITING,
 	CAL_RUNNING,
@@ -87,18 +87,18 @@ enum hal_cal_state {
 #define PER_MIN_LOG_COUNT   2
 #define PER_MAX_LOG_COUNT  10
 
-struct hal_percal_data {
-	enum hal_cal_types calType;
+struct ath9k_percal_data {
+	enum ath9k_cal_types calType;
 	u32 calNumSamples;
 	u32 calCountMax;
 	void (*calCollect) (struct ath_hw *);
 	void (*calPostProc) (struct ath_hw *, u8);
 };
 
-struct hal_cal_list {
-	const struct hal_percal_data *calData;
-	enum hal_cal_state calState;
-	struct hal_cal_list *calNext;
+struct ath9k_cal_list {
+	const struct ath9k_percal_data *calData;
+	enum ath9k_cal_state calState;
+	struct ath9k_cal_list *calNext;
 };
 
 struct ath9k_nfcal_hist {
@@ -116,8 +116,7 @@ int16_t ath9k_hw_getnf(struct ath_hw *ah,
 void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah);
 s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
 bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
-			u8 rxchainmask, bool longcal,
-			bool *isCalDone);
+			u8 rxchainmask, bool longcal);
 bool ath9k_hw_init_cal(struct ath_hw *ah,
 		       struct ath9k_channel *chan);
 
diff --git a/drivers/net/wireless/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index fdf9528fa49..6d20725d645 100644
--- a/drivers/net/wireless/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -44,6 +44,44 @@ static int ath9k_debugfs_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static ssize_t read_file_debug(struct file *file, char __user *user_buf,
+			     size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	char buf[32];
+	unsigned int len;
+
+	len = snprintf(buf, sizeof(buf), "0x%08x\n", sc->debug.debug_mask);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_debug(struct file *file, const char __user *user_buf,
+			     size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	unsigned long mask;
+	char buf[32];
+	ssize_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EINVAL;
+
+	buf[len] = '\0';
+	if (strict_strtoul(buf, 0, &mask))
+		return -EINVAL;
+
+	sc->debug.debug_mask = mask;
+	return count;
+}
+
+static const struct file_operations fops_debug = {
+	.read = read_file_debug,
+	.write = write_file_debug,
+	.open = ath9k_debugfs_open,
+	.owner = THIS_MODULE
+};
+
 static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
@@ -224,111 +262,66 @@ static const struct file_operations fops_interrupt = {
 	.owner = THIS_MODULE
 };
 
-static void ath_debug_stat_11n_rc(struct ath_softc *sc, struct sk_buff *skb)
-{
-	struct ath_tx_info_priv *tx_info_priv = NULL;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_tx_rate *rates = tx_info->status.rates;
-	int final_ts_idx, idx;
-
-	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
-	final_ts_idx = tx_info_priv->tx.ts_rateindex;
-	idx = sc->cur_rate_table->info[rates[final_ts_idx].idx].dot11rate;
-
-	sc->debug.stats.n_rcstats[idx].success++;
-}
-
-static void ath_debug_stat_legacy_rc(struct ath_softc *sc, struct sk_buff *skb)
+void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ath_tx_info_priv *tx_info_priv = NULL;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_tx_rate *rates = tx_info->status.rates;
 	int final_ts_idx, idx;
+	struct ath_rc_stats *stats;
 
 	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
 	final_ts_idx = tx_info_priv->tx.ts_rateindex;
 	idx = rates[final_ts_idx].idx;
-
-	sc->debug.stats.legacy_rcstats[idx].success++;
+	stats = &sc->debug.stats.rcstats[idx];
+	stats->success++;
 }
 
-void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb)
-{
-	if (conf_is_ht(&sc->hw->conf))
-		ath_debug_stat_11n_rc(sc, skb);
-	else
-		ath_debug_stat_legacy_rc(sc, skb);
-}
-
-/* FIXME: legacy rates, later on .. */
 void ath_debug_stat_retries(struct ath_softc *sc, int rix,
 			    int xretries, int retries, u8 per)
 {
-	if (conf_is_ht(&sc->hw->conf)) {
-		int idx = sc->cur_rate_table->info[rix].dot11rate;
+	struct ath_rc_stats *stats = &sc->debug.stats.rcstats[rix];
 
-		sc->debug.stats.n_rcstats[idx].xretries += xretries;
-		sc->debug.stats.n_rcstats[idx].retries += retries;
-		sc->debug.stats.n_rcstats[idx].per = per;
-	}
+	stats->xretries += xretries;
+	stats->retries += retries;
+	stats->per = per;
 }
 
-static ssize_t ath_read_file_stat_11n_rc(struct file *file,
-					 char __user *user_buf,
-					 size_t count, loff_t *ppos)
+static ssize_t read_file_rcstat(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
 {
 	struct ath_softc *sc = file->private_data;
-	char buf[1024];
-	unsigned int len = 0;
+	char *buf;
+	unsigned int len = 0, max;
 	int i = 0;
+	ssize_t retval;
 
-	len += sprintf(buf, "%7s %13s %8s %8s %6s\n\n", "Rate", "Success",
-		       "Retries", "XRetries", "PER");
-
-	for (i = 0; i <= 15; i++) {
-		len += snprintf(buf + len, sizeof(buf) - len,
-				"%5s%3d: %8u %8u %8u %8u\n", "MCS", i,
-				sc->debug.stats.n_rcstats[i].success,
-				sc->debug.stats.n_rcstats[i].retries,
-				sc->debug.stats.n_rcstats[i].xretries,
-				sc->debug.stats.n_rcstats[i].per);
-	}
-
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
+	if (sc->cur_rate_table == NULL)
+		return 0;
 
-static ssize_t ath_read_file_stat_legacy_rc(struct file *file,
-					    char __user *user_buf,
-					    size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-	char buf[512];
-	unsigned int len = 0;
-	int i = 0;
+	max = 80 + sc->cur_rate_table->rate_cnt * 64;
+	buf = kmalloc(max + 1, GFP_KERNEL);
+	if (buf == NULL)
+		return 0;
+	buf[max] = 0;
 
-	len += sprintf(buf, "%7s %13s\n\n", "Rate", "Success");
+	len += sprintf(buf, "%5s %15s %8s %9s %3s\n\n", "Rate", "Success",
+		       "Retries", "XRetries", "PER");
 
 	for (i = 0; i < sc->cur_rate_table->rate_cnt; i++) {
-		len += snprintf(buf + len, sizeof(buf) - len, "%5u: %12u\n",
-				sc->cur_rate_table->info[i].ratekbps / 1000,
-				sc->debug.stats.legacy_rcstats[i].success);
+		u32 ratekbps = sc->cur_rate_table->info[i].ratekbps;
+		struct ath_rc_stats *stats = &sc->debug.stats.rcstats[i];
+
+		len += snprintf(buf + len, max - len,
+			"%3u.%d: %8u %8u %8u %8u\n", ratekbps / 1000,
+			(ratekbps % 1000) / 100, stats->success,
+			stats->retries, stats->xretries,
+			stats->per);
 	}
 
-	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-}
-
-static ssize_t read_file_rcstat(struct file *file, char __user *user_buf,
-				size_t count, loff_t *ppos)
-{
-	struct ath_softc *sc = file->private_data;
-
-	if (sc->cur_rate_table == NULL)
-		return 0;
-
-	if (conf_is_ht(&sc->hw->conf))
-		return ath_read_file_stat_11n_rc(file, user_buf, count, ppos);
-	else
-		return ath_read_file_stat_legacy_rc(file, user_buf, count ,ppos);
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+	return retval;
 }
 
 static const struct file_operations fops_rcstat = {
@@ -498,11 +491,19 @@ int ath9k_init_debug(struct ath_softc *sc)
 {
 	sc->debug.debug_mask = ath9k_debug;
 
+	if (!ath9k_debugfs_root)
+		return -ENOENT;
+
 	sc->debug.debugfs_phy = debugfs_create_dir(wiphy_name(sc->hw->wiphy),
 						      ath9k_debugfs_root);
 	if (!sc->debug.debugfs_phy)
 		goto err;
 
+	sc->debug.debugfs_debug = debugfs_create_file("debug",
+		S_IRUGO | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_debug);
+	if (!sc->debug.debugfs_debug)
+		goto err;
+
 	sc->debug.debugfs_dma = debugfs_create_file("dma", S_IRUGO,
 				       sc->debug.debugfs_phy, sc, &fops_dma);
 	if (!sc->debug.debugfs_dma)
@@ -540,6 +541,7 @@ void ath9k_exit_debug(struct ath_softc *sc)
 	debugfs_remove(sc->debug.debugfs_rcstat);
 	debugfs_remove(sc->debug.debugfs_interrupt);
 	debugfs_remove(sc->debug.debugfs_dma);
+	debugfs_remove(sc->debug.debugfs_debug);
 	debugfs_remove(sc->debug.debugfs_phy);
 }
 
diff --git a/drivers/net/wireless/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 7b0e5419d2b..edda15bf2c1 100644
--- a/drivers/net/wireless/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -19,20 +19,17 @@
 
 enum ATH_DEBUG {
 	ATH_DBG_RESET		= 0x00000001,
-	ATH_DBG_REG_IO		= 0x00000002,
-	ATH_DBG_QUEUE		= 0x00000004,
-	ATH_DBG_EEPROM		= 0x00000008,
-	ATH_DBG_CALIBRATE	= 0x00000010,
-	ATH_DBG_CHANNEL		= 0x00000020,
-	ATH_DBG_INTERRUPT	= 0x00000040,
-	ATH_DBG_REGULATORY	= 0x00000080,
-	ATH_DBG_ANI		= 0x00000100,
-	ATH_DBG_POWER_MGMT	= 0x00000200,
-	ATH_DBG_XMIT		= 0x00000400,
-	ATH_DBG_BEACON		= 0x00001000,
-	ATH_DBG_CONFIG		= 0x00002000,
-	ATH_DBG_KEYCACHE	= 0x00004000,
-	ATH_DBG_FATAL		= 0x00008000,
+	ATH_DBG_QUEUE		= 0x00000002,
+	ATH_DBG_EEPROM		= 0x00000004,
+	ATH_DBG_CALIBRATE	= 0x00000008,
+	ATH_DBG_INTERRUPT	= 0x00000010,
+	ATH_DBG_REGULATORY	= 0x00000020,
+	ATH_DBG_ANI		= 0x00000040,
+	ATH_DBG_XMIT		= 0x00000080,
+	ATH_DBG_BEACON		= 0x00000100,
+	ATH_DBG_CONFIG		= 0x00000200,
+	ATH_DBG_FATAL		= 0x00000400,
+	ATH_DBG_PS		= 0x00000800,
 	ATH_DBG_ANY		= 0xffffffff
 };
 
@@ -83,11 +80,7 @@ struct ath_interrupt_stats {
 	u32 dtim;
 };
 
-struct ath_legacy_rc_stats {
-	u32 success;
-};
-
-struct ath_11n_rc_stats {
+struct ath_rc_stats {
 	u32 success;
 	u32 retries;
 	u32 xretries;
@@ -96,13 +89,13 @@ struct ath_11n_rc_stats {
 
 struct ath_stats {
 	struct ath_interrupt_stats istats;
-	struct ath_legacy_rc_stats legacy_rcstats[12];	/* max(11a,11b,11g) */
-	struct ath_11n_rc_stats n_rcstats[16];		/* 0..15 MCS rates */
+	struct ath_rc_stats rcstats[RATE_TABLE_SIZE];
 };
 
 struct ath9k_debug {
 	int debug_mask;
 	struct dentry *debugfs_phy;
+	struct dentry *debugfs_debug;
 	struct dentry *debugfs_dma;
 	struct dentry *debugfs_interrupt;
 	struct dentry *debugfs_rcstat;
diff --git a/drivers/net/wireless/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index ffc36b0361c..a2fda702b62 100644
--- a/drivers/net/wireless/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -694,7 +694,7 @@ static void ath9k_hw_get_4k_gain_boundaries_pdadcs(struct ath_hw *ah,
 #undef TMP_VAL_VPD_TABLE
 }
 
-static bool ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
+static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
 {
@@ -783,11 +783,11 @@ static bool ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PDADC (%d,%4x): %4.4x %8.8x\n",
 					i, regChainOffset, regOffset,
 					reg32);
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PDADC: Chain %d | "
 					"PDADC %3d Value %3d | "
 					"PDADC %3d Value %3d | "
@@ -805,11 +805,9 @@ static bool ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 	}
 
 	*pTxPowerIndexOffset = 0;
-
-	return true;
 }
 
-static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
+static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 						 struct ath9k_channel *chan,
 						 int16_t *ratesArray,
 						 u16 cfgCtl,
@@ -910,7 +908,7 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 		    ah->eep_ops->get_eeprom_rev(ah) <= 2)
 			twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 			"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
 			"EXT_ADDITIVE %d\n",
 			ctlMode, numCtlModes, isHt40CtlMode,
@@ -918,7 +916,7 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 
 		for (i = 0; (i < AR5416_NUM_CTLS) &&
 				pEepData->ctlIndex[i]; i++) {
-			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"  LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
 				"pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
 				"chan %d\n",
@@ -941,7 +939,7 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 				IS_CHAN_2GHZ(chan),
 				AR5416_EEP4K_NUM_BAND_EDGES);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"    MATCH-EE_IDX %d: ch %d is2 %d "
 					"2xMinEdge %d chainmask %d chains %d\n",
 					i, freq, IS_CHAN_2GHZ(chan),
@@ -961,7 +959,7 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 
 		minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 			"    SEL-Min ctlMode %d pCtlMode %d "
 			"2xMaxEdge %d sP %d minCtlPwr %d\n",
 			ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
@@ -1041,10 +1039,9 @@ static bool ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 		ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
 		ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0];
 	}
-	return true;
 }
 
-static int ath9k_hw_4k_set_txpower(struct ath_hw *ah,
+static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
 				   struct ath9k_channel *chan,
 				   u16 cfgCtl,
 				   u8 twiceAntennaReduction,
@@ -1065,22 +1062,13 @@ static int ath9k_hw_4k_set_txpower(struct ath_hw *ah,
 		ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
 	}
 
-	if (!ath9k_hw_set_4k_power_per_rate_table(ah, chan,
+	ath9k_hw_set_4k_power_per_rate_table(ah, chan,
 					       &ratesArray[0], cfgCtl,
 					       twiceAntennaReduction,
 					       twiceMaxRegulatoryPower,
-					       powerLimit)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"ath9k_hw_set_txpower: unable to set "
-			"tx power per rate table\n");
-		return -EIO;
-	}
+					       powerLimit);
 
-	if (!ath9k_hw_set_4k_power_cal_table(ah, chan, &txPowerIndexOffset)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			 "ath9k_hw_set_txpower: unable to set power table\n");
-		return -EIO;
-	}
+	ath9k_hw_set_4k_power_cal_table(ah, chan, &txPowerIndexOffset);
 
 	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
 		ratesArray[i] =	(int16_t)(txPowerIndexOffset + ratesArray[i]);
@@ -1168,7 +1156,6 @@ static int ath9k_hw_4k_set_txpower(struct ath_hw *ah,
 	else
 		ah->regulatory.max_power_level = ratesArray[i];
 
-	return 0;
 }
 
 static void ath9k_hw_4k_set_addac(struct ath_hw *ah,
@@ -2103,7 +2090,7 @@ static void ath9k_hw_get_def_gain_boundaries_pdadcs(struct ath_hw *ah,
 	return;
 }
 
-static bool ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
+static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
 {
@@ -2234,11 +2221,11 @@ static bool ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PDADC (%d,%4x): %4.4x %8.8x\n",
 					i, regChainOffset, regOffset,
 					reg32);
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PDADC: Chain %d | PDADC %3d "
 					"Value %3d | PDADC %3d Value %3d | "
 					"PDADC %3d Value %3d | PDADC %3d "
@@ -2255,13 +2242,11 @@ static bool ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 	}
 
 	*pTxPowerIndexOffset = 0;
-
-	return true;
 #undef SM_PD_GAIN
 #undef SM_PDGAIN_B
 }
 
-static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
+static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 						  struct ath9k_channel *chan,
 						  int16_t *ratesArray,
 						  u16 cfgCtl,
@@ -2415,14 +2400,14 @@ static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 		    ah->eep_ops->get_eeprom_rev(ah) <= 2)
 			twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 			"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
 			"EXT_ADDITIVE %d\n",
 			ctlMode, numCtlModes, isHt40CtlMode,
 			(pCtlMode[ctlMode] & EXT_ADDITIVE));
 
 		for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
-			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"  LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
 				"pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
 				"chan %d\n",
@@ -2441,7 +2426,7 @@ static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 				rep->ctlEdges[ar5416_get_ntxchains(tx_chainmask) - 1],
 				IS_CHAN_2GHZ(chan), AR5416_NUM_BAND_EDGES);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"    MATCH-EE_IDX %d: ch %d is2 %d "
 					"2xMinEdge %d chainmask %d chains %d\n",
 					i, freq, IS_CHAN_2GHZ(chan),
@@ -2460,7 +2445,7 @@ static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 
 		minCtlPower = min(twiceMaxEdgePower, scaledPower);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 			"    SEL-Min ctlMode %d pCtlMode %d "
 			"2xMaxEdge %d sP %d minCtlPwr %d\n",
 			ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
@@ -2549,10 +2534,9 @@ static bool ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 				targetPowerCckExt.tPow2x[0];
 		}
 	}
-	return true;
 }
 
-static int ath9k_hw_def_set_txpower(struct ath_hw *ah,
+static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
 				    struct ath9k_channel *chan,
 				    u16 cfgCtl,
 				    u8 twiceAntennaReduction,
@@ -2575,22 +2559,13 @@ static int ath9k_hw_def_set_txpower(struct ath_hw *ah,
 		ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
 	}
 
-	if (!ath9k_hw_set_def_power_per_rate_table(ah, chan,
+	ath9k_hw_set_def_power_per_rate_table(ah, chan,
 					       &ratesArray[0], cfgCtl,
 					       twiceAntennaReduction,
 					       twiceMaxRegulatoryPower,
-					       powerLimit)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"ath9k_hw_set_txpower: unable to set "
-			"tx power per rate table\n");
-		return -EIO;
-	}
+					       powerLimit);
 
-	if (!ath9k_hw_set_def_power_cal_table(ah, chan, &txPowerIndexOffset)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			 "ath9k_hw_set_txpower: unable to set power table\n");
-		return -EIO;
-	}
+	ath9k_hw_set_def_power_cal_table(ah, chan, &txPowerIndexOffset);
 
 	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
 		ratesArray[i] =	(int16_t)(txPowerIndexOffset + ratesArray[i]);
@@ -2717,8 +2692,6 @@ static int ath9k_hw_def_set_txpower(struct ath_hw *ah,
 			"Invalid chainmask configuration\n");
 		break;
 	}
-
-	return 0;
 }
 
 static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah,
diff --git a/drivers/net/wireless/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 25b68c881ff..67b8bd12941 100644
--- a/drivers/net/wireless/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -17,6 +17,8 @@
 #ifndef EEPROM_H
 #define EEPROM_H
 
+#include <net/cfg80211.h>
+
 #define AH_USE_EEPROM   0x1
 
 #ifdef __BIG_ENDIAN
@@ -492,7 +494,7 @@ struct eeprom_ops {
 				      struct ath9k_channel *chan);
 	void (*set_board_values)(struct ath_hw *hw, struct ath9k_channel *chan);
 	void (*set_addac)(struct ath_hw *hw, struct ath9k_channel *chan);
-	int (*set_txpower)(struct ath_hw *hw, struct ath9k_channel *chan,
+	void (*set_txpower)(struct ath_hw *hw, struct ath9k_channel *chan,
 			   u16 cfgCtl, u8 twiceAntennaReduction,
 			   u8 twiceMaxRegulatoryPower, u8 powerLimit);
 	u16 (*get_spur_channel)(struct ath_hw *ah, u16 i, bool is2GHz);
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index b15eaf8417f..1579c9407ed 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -84,6 +84,38 @@ static u32 ath9k_hw_mac_to_clks(struct ath_hw *ah, u32 usecs)
 		return ath9k_hw_mac_clks(ah, usecs);
 }
 
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
+{
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+		iowrite32(val, ah->ah_sc->mem + reg_offset);
+		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+	} else
+		iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
+{
+	u32 val;
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+		val = ioread32(ah->ah_sc->mem + reg_offset);
+		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+	} else
+		val = ioread32(ah->ah_sc->mem + reg_offset);
+	return val;
+}
+
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
 {
 	int i;
@@ -97,7 +129,7 @@ bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
 		udelay(AH_TIME_QUANTUM);
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+	DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 		"timeout (%d us) on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
 		timeout, reg, REG_READ(ah, reg), mask, val);
 
@@ -136,7 +168,7 @@ bool ath9k_get_channel_edges(struct ath_hw *ah,
 }
 
 u16 ath9k_hw_computetxtime(struct ath_hw *ah,
-			   struct ath_rate_table *rates,
+			   const struct ath_rate_table *rates,
 			   u32 frameLen, u16 rateix,
 			   bool shortPreamble)
 {
@@ -181,7 +213,7 @@ u16 ath9k_hw_computetxtime(struct ath_hw *ah,
 		}
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Unknown phy %u (rate ix %u)\n",
 			rates->info[rateix].phy, rateix);
 		txTime = 0;
@@ -306,7 +338,7 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (rdData != wrData) {
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 					"address test failed "
 					"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
 					addr, wrData, rdData);
@@ -318,7 +350,7 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (wrData != rdData) {
-				DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 					"address test failed "
 					"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
 					addr, wrData, rdData);
@@ -363,10 +395,7 @@ static void ath9k_hw_set_defaults(struct ath_hw *ah)
 	ah->config.ack_6mb = 0x0;
 	ah->config.cwm_ignore_extcca = 0;
 	ah->config.pcie_powersave_enable = 0;
-	ah->config.pcie_l1skp_enable = 0;
 	ah->config.pcie_clock_req = 0;
-	ah->config.pcie_power_reset = 0x100;
-	ah->config.pcie_restore = 0;
 	ah->config.pcie_waen = 0;
 	ah->config.analog_shiftreg = 1;
 	ah->config.ht_enable = 1;
@@ -375,13 +404,6 @@ static void ath9k_hw_set_defaults(struct ath_hw *ah)
 	ah->config.cck_trig_high = 200;
 	ah->config.cck_trig_low = 100;
 	ah->config.enable_ani = 1;
-	ah->config.noise_immunity_level = 4;
-	ah->config.ofdm_weaksignal_det = 1;
-	ah->config.cck_weaksignal_thr = 0;
-	ah->config.spur_immunity_level = 2;
-	ah->config.firstep_level = 0;
-	ah->config.rssi_thr_high = 40;
-	ah->config.rssi_thr_low = 7;
 	ah->config.diversity_control = 0;
 	ah->config.antenna_switch_swap = 0;
 
@@ -390,7 +412,7 @@ static void ath9k_hw_set_defaults(struct ath_hw *ah)
 		ah->config.spurchans[i][1] = AR_NO_SPUR;
 	}
 
-	ah->config.intr_mitigation = 1;
+	ah->config.intr_mitigation = true;
 
 	/*
 	 * We need this for PCI devices only (Cardbus, PCI, miniPCI)
@@ -463,8 +485,8 @@ static int ath9k_hw_rfattach(struct ath_hw *ah)
 
 	rfStatus = ath9k_hw_init_rf(ah, &ecode);
 	if (!rfStatus) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
-			"RF setup failed, status %u\n", ecode);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"RF setup failed, status: %u\n", ecode);
 		return ecode;
 	}
 
@@ -488,10 +510,9 @@ static int ath9k_hw_rf_claim(struct ath_hw *ah)
 	case AR_RAD2122_SREV_MAJOR:
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
-			"5G Radio Chip Rev 0x%02X is not "
-			"supported by this driver\n",
-			ah->hw_version.analog5GhzRev);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"Radio Chip Rev 0x%02X not supported\n",
+			val & AR_RADIO_SREV_MAJOR);
 		return -EOPNOTSUPP;
 	}
 
@@ -513,12 +534,8 @@ static int ath9k_hw_init_macaddr(struct ath_hw *ah)
 		ah->macaddr[2 * i] = eeval >> 8;
 		ah->macaddr[2 * i + 1] = eeval & 0xff;
 	}
-	if (sum == 0 || sum == 0xffff * 3) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"mac address read failed: %pM\n",
-			ah->macaddr);
+	if (sum == 0 || sum == 0xffff * 3)
 		return -EADDRNOTAVAIL;
-	}
 
 	return 0;
 }
@@ -575,11 +592,8 @@ static int ath9k_hw_post_attach(struct ath_hw *ah)
 {
 	int ecode;
 
-	if (!ath9k_hw_chip_test(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
-			"hardware self-test failed\n");
+	if (!ath9k_hw_chip_test(ah))
 		return -ENODEV;
-	}
 
 	ecode = ath9k_hw_rf_claim(ah);
 	if (ecode != 0)
@@ -617,17 +631,14 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 
 	ath9k_hw_set_defaults(ah);
 
-	if (ah->config.intr_mitigation != 0)
-		ah->intr_mitigation = true;
-
 	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
-		DPRINTF(sc, ATH_DBG_RESET, "Couldn't reset chip\n");
+		DPRINTF(sc, ATH_DBG_FATAL, "Couldn't reset chip\n");
 		ecode = -EIO;
 		goto bad;
 	}
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
-		DPRINTF(sc, ATH_DBG_RESET, "Couldn't wakeup chip\n");
+		DPRINTF(sc, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
 		ecode = -EIO;
 		goto bad;
 	}
@@ -650,7 +661,7 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 	    (ah->hw_version.macVersion != AR_SREV_VERSION_5416_PCIE) &&
 	    (ah->hw_version.macVersion != AR_SREV_VERSION_9160) &&
 	    (!AR_SREV_9100(ah)) && (!AR_SREV_9280(ah)) && (!AR_SREV_9285(ah))) {
-		DPRINTF(sc, ATH_DBG_RESET,
+		DPRINTF(sc, ATH_DBG_FATAL,
 			"Mac Chip Rev 0x%02x.%x is not supported by "
 			"this driver\n", ah->hw_version.macVersion,
 			ah->hw_version.macRev);
@@ -690,10 +701,6 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 	if (AR_SREV_9280_10_OR_LATER(ah))
 		ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
 
-	DPRINTF(sc, ATH_DBG_RESET,
-		"This Mac Chip Rev 0x%02x.%x is \n",
-		ah->hw_version.macVersion, ah->hw_version.macRev);
-
 	if (AR_SREV_9285_12_OR_LATER(ah)) {
 
 		INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2,
@@ -859,11 +866,7 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 	if (AR_SREV_9280_20(ah))
 		ath9k_hw_init_txgain_ini(ah);
 
-	if (!ath9k_hw_fill_cap_info(ah)) {
-		DPRINTF(sc, ATH_DBG_RESET, "failed ath9k_hw_fill_cap_info\n");
-		ecode = -EINVAL;
-		goto bad;
-	}
+	ath9k_hw_fill_cap_info(ah);
 
 	if ((ah->hw_version.devid == AR9280_DEVID_PCI) &&
 	    test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) {
@@ -885,8 +888,8 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
 
 	ecode = ath9k_hw_init_macaddr(ah);
 	if (ecode != 0) {
-		DPRINTF(sc, ATH_DBG_RESET,
-			"failed initializing mac address\n");
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"Failed to initialize MAC address\n");
 		goto bad;
 	}
 
@@ -1054,7 +1057,7 @@ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
 		AR_IMR_RXORN |
 		AR_IMR_BCNMISC;
 
-	if (ah->intr_mitigation)
+	if (ah->config.intr_mitigation)
 		ah->mask_reg |= AR_IMR_RXINTM | AR_IMR_RXMINTR;
 	else
 		ah->mask_reg |= AR_IMR_RXOK;
@@ -1203,23 +1206,23 @@ static u32 ath9k_hw_def_ini_fixup(struct ath_hw *ah,
 	switch (ah->hw_version.devid) {
 	case AR9280_DEVID_PCI:
 		if (reg == 0x7894) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"ini VAL: %x  EEPROM: %x\n", value,
 				(pBase->version & 0xff));
 
 			if ((pBase->version & 0xff) > 0x0a) {
-				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PWDCLKIND: %d\n",
 					pBase->pwdclkind);
 				value &= ~AR_AN_TOP2_PWDCLKIND;
 				value |= AR_AN_TOP2_PWDCLKIND &
 					(pBase->pwdclkind << AR_AN_TOP2_PWDCLKIND_S);
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 					"PWDCLKIND Earlier Rev\n");
 			}
 
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
+			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"final ini VAL: %x\n", value);
 		}
 		break;
@@ -1249,6 +1252,21 @@ static void ath9k_olc_init(struct ath_hw *ah)
 	ah->PDADCdelta = 0;
 }
 
+static u32 ath9k_regd_get_ctl(struct ath_regulatory *reg,
+			      struct ath9k_channel *chan)
+{
+	u32 ctl = ath_regd_get_band_ctl(reg, chan->chan->band);
+
+	if (IS_CHAN_B(chan))
+		ctl |= CTL_11B;
+	else if (IS_CHAN_G(chan))
+		ctl |= CTL_11G;
+	else
+		ctl |= CTL_11A;
+
+	return ctl;
+}
+
 static int ath9k_hw_process_ini(struct ath_hw *ah,
 				struct ath9k_channel *chan,
 				enum ath9k_ht_macmode macmode)
@@ -1256,7 +1274,6 @@ static int ath9k_hw_process_ini(struct ath_hw *ah,
 	int i, regWrites = 0;
 	struct ieee80211_channel *channel = chan->chan;
 	u32 modesIndex, freqIndex;
-	int status;
 
 	switch (chan->chanmode) {
 	case CHANNEL_A:
@@ -1327,8 +1344,7 @@ static int ath9k_hw_process_ini(struct ath_hw *ah,
 	if (AR_SREV_9280(ah))
 		REG_WRITE_ARRAY(&ah->iniModesRxGain, modesIndex, regWrites);
 
-	if (AR_SREV_9280(ah) || (AR_SREV_9285(ah) &&
-	    AR_SREV_9285_12_OR_LATER(ah)))
+	if (AR_SREV_9280(ah) || AR_SREV_9285_12_OR_LATER(ah))
 		REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
 
 	for (i = 0; i < ah->iniCommon.ia_rows; i++) {
@@ -1359,20 +1375,15 @@ static int ath9k_hw_process_ini(struct ath_hw *ah,
 	if (OLC_FOR_AR9280_20_LATER)
 		ath9k_olc_init(ah);
 
-	status = ah->eep_ops->set_txpower(ah, chan,
-				  ath9k_regd_get_ctl(ah, chan),
-				  channel->max_antenna_gain * 2,
-				  channel->max_power * 2,
-				  min((u32) MAX_RATE_POWER,
-				      (u32) ah->regulatory.power_limit));
-	if (status != 0) {
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
-			"error init'ing transmit power\n");
-		return -EIO;
-	}
+	ah->eep_ops->set_txpower(ah, chan,
+				 ath9k_regd_get_ctl(&ah->regulatory, chan),
+				 channel->max_antenna_gain * 2,
+				 channel->max_power * 2,
+				 min((u32) MAX_RATE_POWER,
+				 (u32) ah->regulatory.power_limit));
 
 	if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"ar5416SetRfRegs failed\n");
 		return -EIO;
 	}
@@ -1600,11 +1611,9 @@ static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type)
 	switch (type) {
 	case ATH9K_RESET_POWER_ON:
 		return ath9k_hw_set_reset_power_on(ah);
-		break;
 	case ATH9K_RESET_WARM:
 	case ATH9K_RESET_COLD:
 		return ath9k_hw_set_reset(ah, type);
-		break;
 	default:
 		return false;
 	}
@@ -1678,7 +1687,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
 	if (!ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
 			   AR_PHY_RFBUS_GRANT_EN, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Could not kill baseband RX\n");
 		return false;
 	}
@@ -1686,29 +1695,21 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 	ath9k_hw_set_regs(ah, chan, macmode);
 
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		if (!(ath9k_hw_ar9280_set_channel(ah, chan))) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
-				"failed to set channel\n");
-			return false;
-		}
+		ath9k_hw_ar9280_set_channel(ah, chan);
 	} else {
 		if (!(ath9k_hw_set_channel(ah, chan))) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
-				"failed to set channel\n");
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				"Failed to set channel\n");
 			return false;
 		}
 	}
 
-	if (ah->eep_ops->set_txpower(ah, chan,
-			     ath9k_regd_get_ctl(ah, chan),
+	ah->eep_ops->set_txpower(ah, chan,
+			     ath9k_regd_get_ctl(&ah->regulatory, chan),
 			     channel->max_antenna_gain * 2,
 			     channel->max_power * 2,
 			     min((u32) MAX_RATE_POWER,
-				 (u32) ah->regulatory.power_limit)) != 0) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"error init'ing transmit power\n");
-		return false;
-	}
+			     (u32) ah->regulatory.power_limit));
 
 	synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
 	if (IS_CHAN_B(chan))
@@ -2199,14 +2200,6 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ah->txchainmask = sc->tx_chainmask;
 	ah->rxchainmask = sc->rx_chainmask;
 
-	if (AR_SREV_9285(ah)) {
-		ah->txchainmask &= 0x1;
-		ah->rxchainmask &= 0x1;
-	} else if (AR_SREV_9280(ah)) {
-		ah->txchainmask &= 0x3;
-		ah->rxchainmask &= 0x3;
-	}
-
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
 
@@ -2242,7 +2235,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ath9k_hw_mark_phy_inactive(ah);
 
 	if (!ath9k_hw_chip_reset(ah, chan)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "chip reset failed\n");
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Chip reset failed\n");
 		return -EINVAL;
 	}
 
@@ -2304,13 +2297,11 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
 
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		if (!(ath9k_hw_ar9280_set_channel(ah, chan)))
-			return -EIO;
-	} else {
+	if (AR_SREV_9280_10_OR_LATER(ah))
+		ath9k_hw_ar9280_set_channel(ah, chan);
+	else
 		if (!(ath9k_hw_set_channel(ah, chan)))
 			return -EIO;
-	}
 
 	for (i = 0; i < AR_NUM_DCU; i++)
 		REG_WRITE(ah, AR_DQCUMASK(i), 1 << i);
@@ -2335,8 +2326,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	REG_WRITE(ah, AR_OBS, 8);
 
-	if (ah->intr_mitigation) {
-
+	if (ah->config.intr_mitigation) {
 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500);
 		REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 2000);
 	}
@@ -2385,8 +2375,8 @@ bool ath9k_hw_keyreset(struct ath_hw *ah, u16 entry)
 	u32 keyType;
 
 	if (entry >= ah->caps.keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
-			"entry %u out of range\n", entry);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"keychache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2422,8 +2412,8 @@ bool ath9k_hw_keysetmac(struct ath_hw *ah, u16 entry, const u8 *mac)
 	u32 macHi, macLo;
 
 	if (entry >= ah->caps.keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
-			"entry %u out of range\n", entry);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"keychache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2454,8 +2444,8 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 	u32 keyType;
 
 	if (entry >= pCap->keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
-			"entry %u out of range\n", entry);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"keycache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2465,7 +2455,7 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 		break;
 	case ATH9K_CIPHER_AES_CCM:
 		if (!(pCap->hw_caps & ATH9K_HW_CAP_CIPHER_AESCCM)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 				"AES-CCM not supported by mac rev 0x%x\n",
 				ah->hw_version.macRev);
 			return false;
@@ -2476,20 +2466,20 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 		keyType = AR_KEYTABLE_TYPE_TKIP;
 		if (ATH9K_IS_MIC_ENABLED(ah)
 		    && entry + 64 >= pCap->keycache_size) {
-			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 				"entry %u inappropriate for TKIP\n", entry);
 			return false;
 		}
 		break;
 	case ATH9K_CIPHER_WEP:
-		if (k->kv_len < LEN_WEP40) {
-			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+		if (k->kv_len < WLAN_KEY_LEN_WEP40) {
+			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 				"WEP key length %u too small\n", k->kv_len);
 			return false;
 		}
-		if (k->kv_len <= LEN_WEP40)
+		if (k->kv_len <= WLAN_KEY_LEN_WEP40)
 			keyType = AR_KEYTABLE_TYPE_40;
-		else if (k->kv_len <= LEN_WEP104)
+		else if (k->kv_len <= WLAN_KEY_LEN_WEP104)
 			keyType = AR_KEYTABLE_TYPE_104;
 		else
 			keyType = AR_KEYTABLE_TYPE_128;
@@ -2498,7 +2488,7 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 		keyType = AR_KEYTABLE_TYPE_CLR;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"cipher %u not supported\n", k->kv_type);
 		return false;
 	}
@@ -2508,7 +2498,7 @@ bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 	key2 = get_unaligned_le32(k->kv_val + 6);
 	key3 = get_unaligned_le16(k->kv_val + 10);
 	key4 = get_unaligned_le32(k->kv_val + 12);
-	if (k->kv_len <= LEN_WEP104)
+	if (k->kv_len <= WLAN_KEY_LEN_WEP104)
 		key4 &= 0xff;
 
 	/*
@@ -2716,7 +2706,7 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah, int setChip)
 				    AR_RTC_FORCE_WAKE_EN);
 		}
 		if (i == 0) {
-			DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 				"Failed to wakeup in %uus\n", POWER_UP_TIME / 20);
 			return false;
 		}
@@ -2737,9 +2727,8 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 		"UNDEFINED"
 	};
 
-	DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT, "%s -> %s (%s)\n",
-		modes[ah->power_mode], modes[mode],
-		setChip ? "set chip " : "");
+	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s -> %s\n",
+		modes[ah->power_mode], modes[mode]);
 
 	switch (mode) {
 	case ATH9K_PM_AWAKE:
@@ -2753,7 +2742,7 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 		ath9k_set_power_network_sleep(ah, setChip);
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Unknown power mode %u\n", mode);
 		return false;
 	}
@@ -2943,7 +2932,7 @@ bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
 
 		*masked = isr & ATH9K_INT_COMMON;
 
-		if (ah->intr_mitigation) {
+		if (ah->config.intr_mitigation) {
 			if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM))
 				*masked |= ATH9K_INT_RX;
 		}
@@ -3000,6 +2989,7 @@ bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
 				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
 					"received PCI PERR interrupt\n");
 			}
+			*masked |= ATH9K_INT_FATAL;
 		}
 		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
 			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
@@ -3061,7 +3051,7 @@ enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints)
 	}
 	if (ints & ATH9K_INT_RX) {
 		mask |= AR_IMR_RXERR;
-		if (ah->intr_mitigation)
+		if (ah->config.intr_mitigation)
 			mask |= AR_IMR_RXMINTR | AR_IMR_RXINTM;
 		else
 			mask |= AR_IMR_RXOK | AR_IMR_RXDESC;
@@ -3259,7 +3249,7 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 /* HW Capabilities */
 /*******************/
 
-bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
+void ath9k_hw_fill_cap_info(struct ath_hw *ah)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	u16 capField = 0, eeval;
@@ -3343,8 +3333,6 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	pCap->hw_caps |= ATH9K_HW_CAP_MIC_TKIP;
 	pCap->hw_caps |= ATH9K_HW_CAP_MIC_AESCCM;
 
-	pCap->hw_caps |= ATH9K_HW_CAP_CHAN_SPREAD;
-
 	if (ah->config.ht_enable)
 		pCap->hw_caps |= ATH9K_HW_CAP_HT;
 	else
@@ -3368,7 +3356,6 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		pCap->keycache_size = AR_KEYTABLE_SIZE;
 
 	pCap->hw_caps |= ATH9K_HW_CAP_FASTCC;
-	pCap->num_mr_retries = 4;
 	pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD;
 
 	if (AR_SREV_9285_10_OR_LATER(ah))
@@ -3378,14 +3365,6 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	else
 		pCap->num_gpio_pins = AR_NUM_GPIO;
 
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		pCap->hw_caps |= ATH9K_HW_CAP_WOW;
-		pCap->hw_caps |= ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT;
-	} else {
-		pCap->hw_caps &= ~ATH9K_HW_CAP_WOW;
-		pCap->hw_caps &= ~ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT;
-	}
-
 	if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah)) {
 		pCap->hw_caps |= ATH9K_HW_CAP_CST;
 		pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX;
@@ -3411,7 +3390,8 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	    (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE) ||
 	    (ah->hw_version.macVersion == AR_SREV_VERSION_9160) ||
 	    (ah->hw_version.macVersion == AR_SREV_VERSION_9100) ||
-	    (ah->hw_version.macVersion == AR_SREV_VERSION_9280))
+	    (ah->hw_version.macVersion == AR_SREV_VERSION_9280) ||
+	    (ah->hw_version.macVersion == AR_SREV_VERSION_9285))
 		pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
 	else
 		pCap->hw_caps |= ATH9K_HW_CAP_AUTOSLEEP;
@@ -3445,8 +3425,6 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		ah->btactive_gpio = 6;
 		ah->wlanactive_gpio = 5;
 	}
-
-	return true;
 }
 
 bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
@@ -3754,22 +3732,19 @@ bool ath9k_hw_disable(struct ath_hw *ah)
 	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_COLD);
 }
 
-bool ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
+void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
 {
 	struct ath9k_channel *chan = ah->curchan;
 	struct ieee80211_channel *channel = chan->chan;
 
 	ah->regulatory.power_limit = min(limit, (u32) MAX_RATE_POWER);
 
-	if (ah->eep_ops->set_txpower(ah, chan,
-			     ath9k_regd_get_ctl(ah, chan),
-			     channel->max_antenna_gain * 2,
-			     channel->max_power * 2,
-			     min((u32) MAX_RATE_POWER,
-				 (u32) ah->regulatory.power_limit)) != 0)
-		return false;
-
-	return true;
+	ah->eep_ops->set_txpower(ah, chan,
+				 ath9k_regd_get_ctl(&ah->regulatory, chan),
+				 channel->max_antenna_gain * 2,
+				 channel->max_power * 2,
+				 min((u32) MAX_RATE_POWER,
+				 (u32) ah->regulatory.power_limit));
 }
 
 void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac)
diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 0b594e0ee26..dd8508ef6e0 100644
--- a/drivers/net/wireless/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -25,10 +25,11 @@
 #include "ani.h"
 #include "eeprom.h"
 #include "calib.h"
-#include "regd.h"
 #include "reg.h"
 #include "phy.h"
 
+#include "../regd.h"
+
 #define ATHEROS_VENDOR_ID	0x168c
 #define AR5416_DEVID_PCI	0x0023
 #define AR5416_DEVID_PCIE	0x0024
@@ -124,29 +125,24 @@ enum wireless_mode {
 };
 
 enum ath9k_hw_caps {
-	ATH9K_HW_CAP_CHAN_SPREAD		= BIT(0),
-	ATH9K_HW_CAP_MIC_AESCCM                 = BIT(1),
-	ATH9K_HW_CAP_MIC_CKIP                   = BIT(2),
-	ATH9K_HW_CAP_MIC_TKIP                   = BIT(3),
-	ATH9K_HW_CAP_CIPHER_AESCCM              = BIT(4),
-	ATH9K_HW_CAP_CIPHER_CKIP                = BIT(5),
-	ATH9K_HW_CAP_CIPHER_TKIP                = BIT(6),
-	ATH9K_HW_CAP_VEOL                       = BIT(7),
-	ATH9K_HW_CAP_BSSIDMASK                  = BIT(8),
-	ATH9K_HW_CAP_MCAST_KEYSEARCH            = BIT(9),
-	ATH9K_HW_CAP_CHAN_HALFRATE              = BIT(10),
-	ATH9K_HW_CAP_CHAN_QUARTERRATE           = BIT(11),
-	ATH9K_HW_CAP_HT                         = BIT(12),
-	ATH9K_HW_CAP_GTT                        = BIT(13),
-	ATH9K_HW_CAP_FASTCC                     = BIT(14),
-	ATH9K_HW_CAP_RFSILENT                   = BIT(15),
-	ATH9K_HW_CAP_WOW                        = BIT(16),
-	ATH9K_HW_CAP_CST                        = BIT(17),
-	ATH9K_HW_CAP_ENHANCEDPM                 = BIT(18),
-	ATH9K_HW_CAP_AUTOSLEEP                  = BIT(19),
-	ATH9K_HW_CAP_4KB_SPLITTRANS             = BIT(20),
-	ATH9K_HW_CAP_WOW_MATCHPATTERN_EXACT     = BIT(21),
-	ATH9K_HW_CAP_BT_COEX			= BIT(22)
+	ATH9K_HW_CAP_MIC_AESCCM                 = BIT(0),
+	ATH9K_HW_CAP_MIC_CKIP                   = BIT(1),
+	ATH9K_HW_CAP_MIC_TKIP                   = BIT(2),
+	ATH9K_HW_CAP_CIPHER_AESCCM              = BIT(3),
+	ATH9K_HW_CAP_CIPHER_CKIP                = BIT(4),
+	ATH9K_HW_CAP_CIPHER_TKIP                = BIT(5),
+	ATH9K_HW_CAP_VEOL                       = BIT(6),
+	ATH9K_HW_CAP_BSSIDMASK                  = BIT(7),
+	ATH9K_HW_CAP_MCAST_KEYSEARCH            = BIT(8),
+	ATH9K_HW_CAP_HT                         = BIT(9),
+	ATH9K_HW_CAP_GTT                        = BIT(10),
+	ATH9K_HW_CAP_FASTCC                     = BIT(11),
+	ATH9K_HW_CAP_RFSILENT                   = BIT(12),
+	ATH9K_HW_CAP_CST                        = BIT(13),
+	ATH9K_HW_CAP_ENHANCEDPM                 = BIT(14),
+	ATH9K_HW_CAP_AUTOSLEEP                  = BIT(15),
+	ATH9K_HW_CAP_4KB_SPLITTRANS             = BIT(16),
+	ATH9K_HW_CAP_BT_COEX			= BIT(17)
 };
 
 enum ath9k_capability_type {
@@ -166,7 +162,6 @@ struct ath9k_hw_capabilities {
 	u16 keycache_size;
 	u16 low_5ghz_chan, high_5ghz_chan;
 	u16 low_2ghz_chan, high_2ghz_chan;
-	u16 num_mr_retries;
 	u16 rts_aggr_limit;
 	u8 tx_chainmask;
 	u8 rx_chainmask;
@@ -184,11 +179,8 @@ struct ath9k_ops_config {
 	int ack_6mb;
 	int cwm_ignore_extcca;
 	u8 pcie_powersave_enable;
-	u8 pcie_l1skp_enable;
 	u8 pcie_clock_req;
 	u32 pcie_waen;
-	int pcie_power_reset;
-	u8 pcie_restore;
 	u8 analog_shiftreg;
 	u8 ht_enable;
 	u32 ofdm_trig_low;
@@ -196,17 +188,10 @@ struct ath9k_ops_config {
 	u32 cck_trig_high;
 	u32 cck_trig_low;
 	u32 enable_ani;
-	u8 noise_immunity_level;
-	u32 ofdm_weaksignal_det;
-	u32 cck_weaksignal_thr;
-	u8 spur_immunity_level;
-	u8 firstep_level;
-	int8_t rssi_thr_high;
-	int8_t rssi_thr_low;
 	u16 diversity_control;
 	u16 antenna_switch_swap;
 	int serialize_regmode;
-	int intr_mitigation;
+	bool intr_mitigation;
 #define SPUR_DISABLE        	0
 #define SPUR_ENABLE_IOCTL   	1
 #define SPUR_ENABLE_EEPROM  	2
@@ -281,13 +266,6 @@ enum ath9k_int {
 #define CHANNEL_HT40PLUS  0x20000
 #define CHANNEL_HT40MINUS 0x40000
 
-#define CHANNEL_INTERFERENCE    0x01
-#define CHANNEL_DFS             0x02
-#define CHANNEL_4MS_LIMIT       0x04
-#define CHANNEL_DFS_CLEAR       0x08
-#define CHANNEL_DISALLOW_ADHOC  0x10
-#define CHANNEL_PER_11D_ADHOC   0x20
-
 #define CHANNEL_A           (CHANNEL_5GHZ|CHANNEL_OFDM)
 #define CHANNEL_B           (CHANNEL_2GHZ|CHANNEL_CCK)
 #define CHANNEL_G           (CHANNEL_2GHZ|CHANNEL_OFDM)
@@ -318,10 +296,6 @@ struct ath9k_channel {
 	int16_t rawNoiseFloor;
 };
 
-#define IS_CHAN_A(_c) ((((_c)->channelFlags & CHANNEL_A) == CHANNEL_A) || \
-       (((_c)->channelFlags & CHANNEL_A_HT20) == CHANNEL_A_HT20) || \
-       (((_c)->channelFlags & CHANNEL_A_HT40PLUS) == CHANNEL_A_HT40PLUS) || \
-       (((_c)->channelFlags & CHANNEL_A_HT40MINUS) == CHANNEL_A_HT40MINUS))
 #define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \
        (((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \
        (((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \
@@ -329,7 +303,6 @@ struct ath9k_channel {
 #define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0)
 #define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0)
 #define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0)
-#define IS_CHAN_PASSIVE(_c) (((_c)->channelFlags & CHANNEL_PASSIVE) != 0)
 #define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0)
 #define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0)
 #define IS_CHAN_A_5MHZ_SPACED(_c)			\
@@ -420,7 +393,7 @@ struct ath_hw {
 	struct ath9k_hw_version hw_version;
 	struct ath9k_ops_config config;
 	struct ath9k_hw_capabilities caps;
-	struct ath9k_regulatory regulatory;
+	struct ath_regulatory regulatory;
 	struct ath9k_channel channels[38];
 	struct ath9k_channel *curchan;
 
@@ -463,14 +436,14 @@ struct ath_hw {
 	enum ath9k_ant_setting diversity_control;
 
 	/* Calibration */
-	enum hal_cal_types supp_cals;
-	struct hal_cal_list iq_caldata;
-	struct hal_cal_list adcgain_caldata;
-	struct hal_cal_list adcdc_calinitdata;
-	struct hal_cal_list adcdc_caldata;
-	struct hal_cal_list *cal_list;
-	struct hal_cal_list *cal_list_last;
-	struct hal_cal_list *cal_list_curr;
+	enum ath9k_cal_types supp_cals;
+	struct ath9k_cal_list iq_caldata;
+	struct ath9k_cal_list adcgain_caldata;
+	struct ath9k_cal_list adcdc_calinitdata;
+	struct ath9k_cal_list adcdc_caldata;
+	struct ath9k_cal_list *cal_list;
+	struct ath9k_cal_list *cal_list_last;
+	struct ath9k_cal_list *cal_list_curr;
 #define totalPowerMeasI meas0.unsign
 #define totalPowerMeasQ meas1.unsign
 #define totalIqCorrMeas meas2.sign
@@ -540,7 +513,6 @@ struct ath_hw {
 	enum ath9k_ani_cmd ani_function;
 
 	u32 intr_txqs;
-	bool intr_mitigation;
 	enum ath9k_ht_extprotspacing extprotspacing;
 	u8 txchainmask;
 	u8 rxchainmask;
@@ -573,7 +545,7 @@ struct ath_hw *ath9k_hw_attach(u16 devid, struct ath_softc *sc, int *error);
 void ath9k_hw_rfdetach(struct ath_hw *ah);
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   bool bChannelChange);
-bool ath9k_hw_fill_cap_info(struct ath_hw *ah);
+void ath9k_hw_fill_cap_info(struct ath_hw *ah);
 bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
 			    u32 capability, u32 *result);
 bool ath9k_hw_setcapability(struct ath_hw *ah, enum ath9k_capability_type type,
@@ -608,7 +580,8 @@ bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
 u32 ath9k_hw_reverse_bits(u32 val, u32 n);
 bool ath9k_get_channel_edges(struct ath_hw *ah, u16 flags, u16 *low, u16 *high);
-u16 ath9k_hw_computetxtime(struct ath_hw *ah, struct ath_rate_table *rates,
+u16 ath9k_hw_computetxtime(struct ath_hw *ah,
+			   const struct ath_rate_table *rates,
 			   u32 frameLen, u16 rateix, bool shortPreamble);
 void ath9k_hw_get_channel_centers(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
@@ -617,7 +590,7 @@ u32 ath9k_hw_getrxfilter(struct ath_hw *ah);
 void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits);
 bool ath9k_hw_phy_disable(struct ath_hw *ah);
 bool ath9k_hw_disable(struct ath_hw *ah);
-bool ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit);
+void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit);
 void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac);
 void ath9k_hw_setopmode(struct ath_hw *ah);
 void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1);
diff --git a/drivers/net/wireless/ath9k/initvals.h b/drivers/net/wireless/ath/ath9k/initvals.h
index e2f0a34b79a..e2f0a34b79a 100644
--- a/drivers/net/wireless/ath9k/initvals.h
+++ b/drivers/net/wireless/ath/ath9k/initvals.h
diff --git a/drivers/net/wireless/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index e0a6dee4583..8ae4ec21667 100644
--- a/drivers/net/wireless/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -49,7 +49,7 @@ bool ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp)
 
 bool ath9k_hw_txstart(struct ath_hw *ah, u32 q)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "queue %u\n", q);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Enable TXE on queue: %u\n", q);
 
 	REG_WRITE(ah, AR_Q_TXE, 1 << q);
 
@@ -110,13 +110,15 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 	u32 wait_time = ATH9K_TX_STOP_DMA_TIMEOUT / ATH9K_TIME_QUANTUM;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Stopping TX DMA, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue\n");
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Stopping TX DMA, "
+			"inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -146,7 +148,7 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 				break;
 
 			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-				"TSF have moved while trying to set "
+				"TSF has moved while trying to set "
 				"quiet time TSF: 0x%08x\n", tsfLow);
 		}
 
@@ -158,8 +160,8 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 		wait = wait_time;
 		while (ath9k_hw_numtxpending(ah, q)) {
 			if ((--wait) == 0) {
-				DPRINTF(ah->ah_sc, ATH_DBG_XMIT,
-					"Failed to stop Tx DMA in 100 "
+				DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
+					"Failed to stop TX DMA in 100 "
 					"msec after killing last frame\n");
 				break;
 			}
@@ -454,17 +456,19 @@ bool ath9k_hw_set_txq_props(struct ath_hw *ah, int q,
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set TXQ properties, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue\n");
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set TXQ properties, "
+			"inactive queue: %u\n", q);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "queue %p\n", qi);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set queue properties for: %u\n", q);
 
 	qi->tqi_ver = qinfo->tqi_ver;
 	qi->tqi_subtype = qinfo->tqi_subtype;
@@ -521,13 +525,15 @@ bool ath9k_hw_get_txq_props(struct ath_hw *ah, int q,
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Get TXQ properties, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue\n");
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Get TXQ properties, "
+			"inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -575,22 +581,23 @@ int ath9k_hw_setuptxqueue(struct ath_hw *ah, enum ath9k_tx_queue type,
 			    ATH9K_TX_QUEUE_INACTIVE)
 				break;
 		if (q == pCap->total_queues) {
-			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-				"no available tx queue\n");
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+				"No available TX queue\n");
 			return -1;
 		}
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "bad tx queue type %u\n", type);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Invalid TX queue type: %u\n",
+			type);
 		return -1;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "queue %u\n", q);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Setup TX queue: %u\n", q);
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type != ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-			"tx queue %u already active\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"TX queue: %u already active\n", q);
 		return -1;
 	}
 	memset(qi, 0, sizeof(struct ath9k_tx_queue_info));
@@ -620,16 +627,18 @@ bool ath9k_hw_releasetxqueue(struct ath_hw *ah, u32 q)
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TXQ, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TXQ, "
+			"inactive queue: %u\n", q);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "release queue %u\n", q);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TX queue: %u\n", q);
 
 	qi->tqi_type = ATH9K_TX_QUEUE_INACTIVE;
 	ah->txok_interrupt_mask &= ~(1 << q);
@@ -650,17 +659,19 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 	u32 cwMin, chanCwMin, value;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "invalid queue num %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TXQ, "
+			"invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "inactive queue %u\n", q);
+		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TXQ, "
+			"inactive queue: %u\n", q);
 		return true;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "reset queue %u\n", q);
+	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TX queue: %u\n", q);
 
 	if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
 		if (chan && IS_CHAN_B(chan))
@@ -894,7 +905,7 @@ bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set)
 
 			reg = REG_READ(ah, AR_OBS_BUS_1);
 			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"rx failed to go idle in 10 ms RXSM=0x%x\n", reg);
+				"RX failed to go idle in 10 ms RXSM=0x%x\n", reg);
 
 			return false;
 		}
@@ -949,8 +960,8 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah)
 	}
 
 	if (i == 0) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-			"dma failed to stop in %d ms "
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+			"DMA failed to stop in %d ms "
 			"AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
 			AH_RX_STOP_DMA_TIMEOUT / 1000,
 			REG_READ(ah, AR_CR),
diff --git a/drivers/net/wireless/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 1176bce8b76..1176bce8b76 100644
--- a/drivers/net/wireless/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 13d4e6756c9..f7baa406918 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -35,14 +35,14 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
 #define CHAN2G(_freq, _idx)  { \
 	.center_freq = (_freq), \
 	.hw_value = (_idx), \
-	.max_power = 30, \
+	.max_power = 20, \
 }
 
 #define CHAN5G(_freq, _idx) { \
 	.band = IEEE80211_BAND_5GHZ, \
 	.center_freq = (_freq), \
 	.hw_value = (_idx), \
-	.max_power = 30, \
+	.max_power = 20, \
 }
 
 /* Some 2 GHz radios are actually tunable on 2312-2732
@@ -189,7 +189,7 @@ static u8 parse_mpdudensity(u8 mpdudensity)
 
 static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
 {
-	struct ath_rate_table *rate_table = NULL;
+	const struct ath_rate_table *rate_table = NULL;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_rate *rate;
 	int i, maxrates;
@@ -280,14 +280,13 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	if (r) {
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"Unable to reset channel (%u Mhz) "
-			"reset status %u\n",
+			"reset status %d\n",
 			channel->center_freq, r);
 		spin_unlock_bh(&sc->sc_resetlock);
 		return r;
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
-	sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE;
 	sc->sc_flags &= ~SC_OP_FULL_RESET;
 
 	if (ath_startrecv(sc) != 0) {
@@ -330,6 +329,12 @@ static void ath_ani_calibrate(unsigned long data)
 	if (sc->sc_flags & SC_OP_SCANNING)
 		goto set_timer;
 
+	/* Only calibrate if awake */
+	if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
+		goto set_timer;
+
+	ath9k_ps_wakeup(sc);
+
 	/* Long calibration runs independently of short calibration. */
 	if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
 		longcal = true;
@@ -368,31 +373,21 @@ static void ath_ani_calibrate(unsigned long data)
 
 		/* Perform calibration if necessary */
 		if (longcal || shortcal) {
-			bool iscaldone = false;
-
-			if (ath9k_hw_calibrate(ah, ah->curchan,
-					       sc->rx_chainmask, longcal,
-					       &iscaldone)) {
-				if (longcal)
-					sc->ani.noise_floor =
-						ath9k_hw_getchan_noise(ah,
-							       ah->curchan);
-
-				DPRINTF(sc, ATH_DBG_ANI,
-					"calibrate chan %u/%x nf: %d\n",
-					ah->curchan->channel,
-					ah->curchan->channelFlags,
-					sc->ani.noise_floor);
-			} else {
-				DPRINTF(sc, ATH_DBG_ANY,
-					"calibrate chan %u/%x failed\n",
-					ah->curchan->channel,
-					ah->curchan->channelFlags);
-			}
-			sc->ani.caldone = iscaldone;
+			sc->ani.caldone = ath9k_hw_calibrate(ah, ah->curchan,
+						     sc->rx_chainmask, longcal);
+
+			if (longcal)
+				sc->ani.noise_floor = ath9k_hw_getchan_noise(ah,
+								     ah->curchan);
+
+			DPRINTF(sc, ATH_DBG_ANI," calibrate chan %u/%x nf: %d\n",
+				ah->curchan->channel, ah->curchan->channelFlags,
+				sc->ani.noise_floor);
 		}
 	}
 
+	ath9k_ps_restore(sc);
+
 set_timer:
 	/*
 	* Set timer interval based on previous results.
@@ -408,6 +403,18 @@ set_timer:
 	mod_timer(&sc->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
 }
 
+static void ath_start_ani(struct ath_softc *sc)
+{
+	unsigned long timestamp = jiffies_to_msecs(jiffies);
+
+	sc->ani.longcal_timer = timestamp;
+	sc->ani.shortcal_timer = timestamp;
+	sc->ani.checkani_timer = timestamp;
+
+	mod_timer(&sc->ani.timer,
+		  jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
+}
+
 /*
  * Update tx/rx chainmask. For legacy association,
  * hard code chainmask to 1x1, for 11n association, use
@@ -416,7 +423,6 @@ set_timer:
  */
 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 {
-	sc->sc_flags |= SC_OP_CHAINMASK_UPDATE;
 	if (is_ht ||
 	    (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)) {
 		sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
@@ -436,12 +442,12 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
 
 	an = (struct ath_node *)sta->drv_priv;
 
-	if (sc->sc_flags & SC_OP_TXAGGR)
+	if (sc->sc_flags & SC_OP_TXAGGR) {
 		ath_tx_node_init(sc, an);
-
-	an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
-			     sta->ht_cap.ampdu_factor);
-	an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
+		an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
+				     sta->ht_cap.ampdu_factor);
+		an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
+	}
 }
 
 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
@@ -457,133 +463,130 @@ static void ath9k_tasklet(unsigned long data)
 	struct ath_softc *sc = (struct ath_softc *)data;
 	u32 status = sc->intrstatus;
 
+	ath9k_ps_wakeup(sc);
+
 	if (status & ATH9K_INT_FATAL) {
-		/* need a chip reset */
 		ath_reset(sc, false);
+		ath9k_ps_restore(sc);
 		return;
-	} else {
+	}
 
-		if (status &
-		    (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
-			spin_lock_bh(&sc->rx.rxflushlock);
-			ath_rx_tasklet(sc, 0);
-			spin_unlock_bh(&sc->rx.rxflushlock);
-		}
-		/* XXX: optimize this */
-		if (status & ATH9K_INT_TX)
-			ath_tx_tasklet(sc);
+	if (status & (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
+		spin_lock_bh(&sc->rx.rxflushlock);
+		ath_rx_tasklet(sc, 0);
+		spin_unlock_bh(&sc->rx.rxflushlock);
+	}
+
+	if (status & ATH9K_INT_TX)
+		ath_tx_tasklet(sc);
+
+	if ((status & ATH9K_INT_TSFOOR) &&
+	    (sc->hw->conf.flags & IEEE80211_CONF_PS)) {
+		/*
+		 * TSF sync does not look correct; remain awake to sync with
+		 * the next Beacon.
+		 */
+		DPRINTF(sc, ATH_DBG_PS, "TSFOOR - Sync with next Beacon\n");
+		sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
 	}
 
 	/* re-enable hardware interrupt */
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+	ath9k_ps_restore(sc);
 }
 
 irqreturn_t ath_isr(int irq, void *dev)
 {
+#define SCHED_INTR (				\
+		ATH9K_INT_FATAL |		\
+		ATH9K_INT_RXORN |		\
+		ATH9K_INT_RXEOL |		\
+		ATH9K_INT_RX |			\
+		ATH9K_INT_TX |			\
+		ATH9K_INT_BMISS |		\
+		ATH9K_INT_CST |			\
+		ATH9K_INT_TSFOOR)
+
 	struct ath_softc *sc = dev;
 	struct ath_hw *ah = sc->sc_ah;
 	enum ath9k_int status;
 	bool sched = false;
 
-	do {
-		if (sc->sc_flags & SC_OP_INVALID) {
-			/*
-			 * The hardware is not ready/present, don't
-			 * touch anything. Note this can happen early
-			 * on if the IRQ is shared.
-			 */
-			return IRQ_NONE;
-		}
-		if (!ath9k_hw_intrpend(ah)) {	/* shared irq, not for us */
-			return IRQ_NONE;
-		}
+	/*
+	 * The hardware is not ready/present, don't
+	 * touch anything. Note this can happen early
+	 * on if the IRQ is shared.
+	 */
+	if (sc->sc_flags & SC_OP_INVALID)
+		return IRQ_NONE;
 
-		/*
-		 * Figure out the reason(s) for the interrupt.  Note
-		 * that the hal returns a pseudo-ISR that may include
-		 * bits we haven't explicitly enabled so we mask the
-		 * value to insure we only process bits we requested.
-		 */
-		ath9k_hw_getisr(ah, &status);	/* NB: clears ISR too */
 
-		status &= sc->imask;	/* discard unasked-for bits */
+	/* shared irq, not for us */
 
-		/*
-		 * If there are no status bits set, then this interrupt was not
-		 * for me (should have been caught above).
-		 */
-		if (!status)
-			return IRQ_NONE;
+	if (!ath9k_hw_intrpend(ah))
+		return IRQ_NONE;
 
-		sc->intrstatus = status;
-		ath9k_ps_wakeup(sc);
+	/*
+	 * Figure out the reason(s) for the interrupt.  Note
+	 * that the hal returns a pseudo-ISR that may include
+	 * bits we haven't explicitly enabled so we mask the
+	 * value to insure we only process bits we requested.
+	 */
+	ath9k_hw_getisr(ah, &status);	/* NB: clears ISR too */
+	status &= sc->imask;	/* discard unasked-for bits */
 
-		if (status & ATH9K_INT_FATAL) {
-			/* need a chip reset */
-			sched = true;
-		} else if (status & ATH9K_INT_RXORN) {
-			/* need a chip reset */
-			sched = true;
-		} else {
-			if (status & ATH9K_INT_SWBA) {
-				/* schedule a tasklet for beacon handling */
-				tasklet_schedule(&sc->bcon_tasklet);
-			}
-			if (status & ATH9K_INT_RXEOL) {
-				/*
-				 * NB: the hardware should re-read the link when
-				 *     RXE bit is written, but it doesn't work
-				 *     at least on older hardware revs.
-				 */
-				sched = true;
-			}
+	/*
+	 * If there are no status bits set, then this interrupt was not
+	 * for me (should have been caught above).
+	 */
+	if (!status)
+		return IRQ_NONE;
 
-			if (status & ATH9K_INT_TXURN)
-				/* bump tx trigger level */
-				ath9k_hw_updatetxtriglevel(ah, true);
-			/* XXX: optimize this */
-			if (status & ATH9K_INT_RX)
-				sched = true;
-			if (status & ATH9K_INT_TX)
-				sched = true;
-			if (status & ATH9K_INT_BMISS)
-				sched = true;
-			/* carrier sense timeout */
-			if (status & ATH9K_INT_CST)
-				sched = true;
-			if (status & ATH9K_INT_MIB) {
-				/*
-				 * Disable interrupts until we service the MIB
-				 * interrupt; otherwise it will continue to
-				 * fire.
-				 */
-				ath9k_hw_set_interrupts(ah, 0);
-				/*
-				 * Let the hal handle the event. We assume
-				 * it will clear whatever condition caused
-				 * the interrupt.
-				 */
-				ath9k_hw_procmibevent(ah, &sc->nodestats);
-				ath9k_hw_set_interrupts(ah, sc->imask);
-			}
-			if (status & ATH9K_INT_TIM_TIMER) {
-				if (!(ah->caps.hw_caps &
-				      ATH9K_HW_CAP_AUTOSLEEP)) {
-					/* Clear RxAbort bit so that we can
-					 * receive frames */
-					ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
-					ath9k_hw_setrxabort(ah, 0);
-					sched = true;
-					sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
-				}
-			}
-			if (status & ATH9K_INT_TSFOOR) {
-				/* FIXME: Handle this interrupt for power save */
-				sched = true;
-			}
+	/* Cache the status */
+	sc->intrstatus = status;
+
+	if (status & SCHED_INTR)
+		sched = true;
+
+	/*
+	 * If a FATAL or RXORN interrupt is received, we have to reset the
+	 * chip immediately.
+	 */
+	if (status & (ATH9K_INT_FATAL | ATH9K_INT_RXORN))
+		goto chip_reset;
+
+	if (status & ATH9K_INT_SWBA)
+		tasklet_schedule(&sc->bcon_tasklet);
+
+	if (status & ATH9K_INT_TXURN)
+		ath9k_hw_updatetxtriglevel(ah, true);
+
+	if (status & ATH9K_INT_MIB) {
+		/*
+		 * Disable interrupts until we service the MIB
+		 * interrupt; otherwise it will continue to
+		 * fire.
+		 */
+		ath9k_hw_set_interrupts(ah, 0);
+		/*
+		 * Let the hal handle the event. We assume
+		 * it will clear whatever condition caused
+		 * the interrupt.
+		 */
+		ath9k_hw_procmibevent(ah, &sc->nodestats);
+		ath9k_hw_set_interrupts(ah, sc->imask);
+	}
+
+	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
+		if (status & ATH9K_INT_TIM_TIMER) {
+			/* Clear RxAbort bit so that we can
+			 * receive frames */
+			ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
+			ath9k_hw_setrxabort(sc->sc_ah, 0);
+			sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
 		}
-		ath9k_ps_restore(sc);
-	} while (0);
+
+chip_reset:
 
 	ath_debug_stat_interrupt(sc, status);
 
@@ -594,6 +597,8 @@ irqreturn_t ath_isr(int irq, void *dev)
 	}
 
 	return IRQ_HANDLED;
+
+#undef SCHED_INTR
 }
 
 static u32 ath_get_extchanmode(struct ath_softc *sc,
@@ -676,7 +681,7 @@ static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
 	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
 	if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) {
 		/* TX MIC entry failed. No need to proceed further */
-		DPRINTF(sc, ATH_DBG_KEYCACHE,
+		DPRINTF(sc, ATH_DBG_FATAL,
 			"Setting TX MIC Key Failed\n");
 		return 0;
 	}
@@ -909,6 +914,13 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		if (avp->av_opmode == NL80211_IFTYPE_STATION) {
 			sc->curaid = bss_conf->aid;
 			ath9k_hw_write_associd(sc);
+
+			/*
+			 * Request a re-configuration of Beacon related timers
+			 * on the receipt of the first Beacon frame (i.e.,
+			 * after time sync with the AP).
+			 */
+			sc->sc_flags |= SC_OP_BEACON_SYNC;
 		}
 
 		/* Configure the beacon */
@@ -920,11 +932,9 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		sc->nodestats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
 		sc->nodestats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
 
-		/* Start ANI */
-		mod_timer(&sc->ani.timer,
-			  jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
+		ath_start_ani(sc);
 	} else {
-		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISSOC\n");
+		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
 		sc->curaid = 0;
 	}
 }
@@ -1098,14 +1108,14 @@ void ath_radio_enable(struct ath_softc *sc)
 	int r;
 
 	ath9k_ps_wakeup(sc);
-	spin_lock_bh(&sc->sc_resetlock);
+	ath9k_hw_configpcipowersave(ah, 0);
 
+	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, false);
-
 	if (r) {
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"Unable to reset channel %u (%uMhz) ",
-			"reset status %u\n",
+			"reset status %d\n",
 			channel->center_freq, r);
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
@@ -1157,12 +1167,13 @@ void ath_radio_disable(struct ath_softc *sc)
 	if (r) {
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"Unable to reset channel %u (%uMhz) "
-			"reset status %u\n",
+			"reset status %d\n",
 			channel->center_freq, r);
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath9k_hw_phy_disable(ah);
+	ath9k_hw_configpcipowersave(ah, 1);
 	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
 	ath9k_ps_restore(sc);
 }
@@ -1181,121 +1192,69 @@ static bool ath_is_rfkill_set(struct ath_softc *sc)
 				  ah->rfkill_polarity;
 }
 
-/* h/w rfkill poll function */
-static void ath_rfkill_poll(struct work_struct *work)
+/* s/w rfkill handlers */
+static int ath_rfkill_set_block(void *data, bool blocked)
 {
-	struct ath_softc *sc = container_of(work, struct ath_softc,
-					    rf_kill.rfkill_poll.work);
-	bool radio_on;
-
-	if (sc->sc_flags & SC_OP_INVALID)
-		return;
-
-	radio_on = !ath_is_rfkill_set(sc);
-
-	/*
-	 * enable/disable radio only when there is a
-	 * state change in RF switch
-	 */
-	if (radio_on == !!(sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED)) {
-		enum rfkill_state state;
-
-		if (sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED) {
-			state = radio_on ? RFKILL_STATE_SOFT_BLOCKED
-				: RFKILL_STATE_HARD_BLOCKED;
-		} else if (radio_on) {
-			ath_radio_enable(sc);
-			state = RFKILL_STATE_UNBLOCKED;
-		} else {
-			ath_radio_disable(sc);
-			state = RFKILL_STATE_HARD_BLOCKED;
-		}
-
-		if (state == RFKILL_STATE_HARD_BLOCKED)
-			sc->sc_flags |= SC_OP_RFKILL_HW_BLOCKED;
-		else
-			sc->sc_flags &= ~SC_OP_RFKILL_HW_BLOCKED;
+	struct ath_softc *sc = data;
 
-		rfkill_force_state(sc->rf_kill.rfkill, state);
-	}
+	if (blocked)
+		ath_radio_disable(sc);
+	else
+		ath_radio_enable(sc);
 
-	queue_delayed_work(sc->hw->workqueue, &sc->rf_kill.rfkill_poll,
-			   msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL));
+	return 0;
 }
 
-/* s/w rfkill handler */
-static int ath_sw_toggle_radio(void *data, enum rfkill_state state)
+static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data)
 {
 	struct ath_softc *sc = data;
+	bool blocked = !!ath_is_rfkill_set(sc);
 
-	switch (state) {
-	case RFKILL_STATE_SOFT_BLOCKED:
-		if (!(sc->sc_flags & (SC_OP_RFKILL_HW_BLOCKED |
-		    SC_OP_RFKILL_SW_BLOCKED)))
-			ath_radio_disable(sc);
-		sc->sc_flags |= SC_OP_RFKILL_SW_BLOCKED;
-		return 0;
-	case RFKILL_STATE_UNBLOCKED:
-		if ((sc->sc_flags & SC_OP_RFKILL_SW_BLOCKED)) {
-			sc->sc_flags &= ~SC_OP_RFKILL_SW_BLOCKED;
-			if (sc->sc_flags & SC_OP_RFKILL_HW_BLOCKED) {
-				DPRINTF(sc, ATH_DBG_FATAL, "Can't turn on the"
-					"radio as it is disabled by h/w\n");
-				return -EPERM;
-			}
-			ath_radio_enable(sc);
-		}
-		return 0;
-	default:
-		return -EINVAL;
-	}
+	if (rfkill_set_hw_state(rfkill, blocked))
+		ath_radio_disable(sc);
+	else
+		ath_radio_enable(sc);
 }
 
 /* Init s/w rfkill */
 static int ath_init_sw_rfkill(struct ath_softc *sc)
 {
-	sc->rf_kill.rfkill = rfkill_allocate(wiphy_dev(sc->hw->wiphy),
-					     RFKILL_TYPE_WLAN);
+	sc->rf_kill.ops.set_block = ath_rfkill_set_block;
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+		sc->rf_kill.ops.poll = ath_rfkill_poll_state;
+
+	snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
+		"ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
+
+	sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name,
+					  wiphy_dev(sc->hw->wiphy),
+					  RFKILL_TYPE_WLAN,
+					  &sc->rf_kill.ops, sc);
 	if (!sc->rf_kill.rfkill) {
 		DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n");
 		return -ENOMEM;
 	}
 
-	snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
-		"ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
-	sc->rf_kill.rfkill->name = sc->rf_kill.rfkill_name;
-	sc->rf_kill.rfkill->data = sc;
-	sc->rf_kill.rfkill->toggle_radio = ath_sw_toggle_radio;
-	sc->rf_kill.rfkill->state = RFKILL_STATE_UNBLOCKED;
-	sc->rf_kill.rfkill->user_claim_unsupported = 1;
-
 	return 0;
 }
 
 /* Deinitialize rfkill */
 static void ath_deinit_rfkill(struct ath_softc *sc)
 {
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-
 	if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) {
 		rfkill_unregister(sc->rf_kill.rfkill);
+		rfkill_destroy(sc->rf_kill.rfkill);
 		sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED;
-		sc->rf_kill.rfkill = NULL;
 	}
 }
 
 static int ath_start_rfkill_poll(struct ath_softc *sc)
 {
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		queue_delayed_work(sc->hw->workqueue,
-				   &sc->rf_kill.rfkill_poll, 0);
-
 	if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
 		if (rfkill_register(sc->rf_kill.rfkill)) {
 			DPRINTF(sc, ATH_DBG_FATAL,
 				"Unable to register rfkill\n");
-			rfkill_free(sc->rf_kill.rfkill);
+			rfkill_destroy(sc->rf_kill.rfkill);
 
 			/* Deinitialize the device */
 			ath_cleanup(sc);
@@ -1362,6 +1321,17 @@ void ath_detach(struct ath_softc *sc)
 	ath9k_ps_restore(sc);
 }
 
+static int ath9k_reg_notifier(struct wiphy *wiphy,
+			      struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	struct ath_regulatory *reg = &sc->sc_ah->regulatory;
+
+	return ath_reg_notifier_apply(wiphy, request, reg);
+}
+
 static int ath_init(u16 devid, struct ath_softc *sc)
 {
 	struct ath_hw *ah = NULL;
@@ -1403,7 +1373,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 	/* Get the hardware key cache size. */
 	sc->keymax = ah->caps.keycache_size;
 	if (sc->keymax > ATH_KEYMAX) {
-		DPRINTF(sc, ATH_DBG_KEYCACHE,
+		DPRINTF(sc, ATH_DBG_ANY,
 			"Warning, using only %u entries in %u key cache\n",
 			ATH_KEYMAX, sc->keymax);
 		sc->keymax = ATH_KEYMAX;
@@ -1416,7 +1386,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 	for (i = 0; i < sc->keymax; i++)
 		ath9k_hw_keyreset(ah, (u16) i);
 
-	if (ath9k_regd_init(sc->sc_ah))
+	if (error)
 		goto bad;
 
 	/* default to MONITOR mode */
@@ -1545,9 +1515,6 @@ static int ath_init(u16 devid, struct ath_softc *sc)
 		sc->beacon.bslot_aphy[i] = NULL;
 	}
 
-	/* save MISC configurations */
-	sc->config.swBeaconProcess = 1;
-
 	/* setup channels and rates */
 
 	sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
@@ -1602,9 +1569,6 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
 
-	hw->wiphy->reg_notifier = ath9k_reg_notifier;
-	hw->wiphy->strict_regulatory = true;
-
 	hw->queues = 4;
 	hw->max_rates = 4;
 	hw->channel_change_time = 5000;
@@ -1625,8 +1589,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 int ath_attach(u16 devid, struct ath_softc *sc)
 {
 	struct ieee80211_hw *hw = sc->hw;
-	const struct ieee80211_regdomain *regd;
 	int error = 0, i;
+	struct ath_regulatory *reg;
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
 
@@ -1640,6 +1604,13 @@ int ath_attach(u16 devid, struct ath_softc *sc)
 
 	ath_set_hw_capab(sc, hw);
 
+	error = ath_regd_init(&sc->sc_ah->regulatory, sc->hw->wiphy,
+			      ath9k_reg_notifier);
+	if (error)
+		return error;
+
+	reg = &sc->sc_ah->regulatory;
+
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
 		setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
 		if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
@@ -1656,41 +1627,20 @@ int ath_attach(u16 devid, struct ath_softc *sc)
 		goto error_attach;
 
 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	/* Initialze h/w Rfkill */
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
-
 	/* Initialize s/w rfkill */
 	error = ath_init_sw_rfkill(sc);
 	if (error)
 		goto error_attach;
 #endif
 
-	if (ath9k_is_world_regd(sc->sc_ah)) {
-		/* Anything applied here (prior to wiphy registration) gets
-		 * saved on the wiphy orig_* parameters */
-		regd = ath9k_world_regdomain(sc->sc_ah);
-		hw->wiphy->custom_regulatory = true;
-		hw->wiphy->strict_regulatory = false;
-	} else {
-		/* This gets applied in the case of the absense of CRDA,
-		 * it's our own custom world regulatory domain, similar to
-		 * cfg80211's but we enable passive scanning */
-		regd = ath9k_default_world_regdomain();
-	}
-	wiphy_apply_custom_regulatory(hw->wiphy, regd);
-	ath9k_reg_apply_radar_flags(hw->wiphy);
-	ath9k_reg_apply_world_flags(hw->wiphy, NL80211_REGDOM_SET_BY_DRIVER);
-
 	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
 	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
 	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
 
 	error = ieee80211_register_hw(hw);
 
-	if (!ath9k_is_world_regd(sc->sc_ah)) {
-		error = regulatory_hint(hw->wiphy,
-			sc->sc_ah->regulatory.alpha2);
+	if (!ath_is_world_regd(reg)) {
+		error = regulatory_hint(hw->wiphy, reg->alpha2);
 		if (error)
 			goto error_attach;
 	}
@@ -1728,7 +1678,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
 	if (r)
 		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset hardware; reset status %u\n", r);
+			"Unable to reset hardware; reset status %d\n", r);
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	if (ath_startrecv(sc) != 0)
@@ -1792,7 +1742,6 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 		goto fail;
 	}
 
-	dd->dd_name = name;
 	dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
 
 	/*
@@ -1822,7 +1771,7 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 	}
 	ds = dd->dd_desc;
 	DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
-		dd->dd_name, ds, (u32) dd->dd_desc_len,
+		name, ds, (u32) dd->dd_desc_len,
 		ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
 
 	/* allocate buffers */
@@ -2021,7 +1970,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	r = ath9k_hw_reset(sc->sc_ah, init_channel, false);
 	if (r) {
 		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset hardware; reset status %u "
+			"Unable to reset hardware; reset status %d "
 			"(freq %u MHz)\n", r,
 			curchan->center_freq);
 		spin_unlock_bh(&sc->sc_resetlock);
@@ -2043,8 +1992,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	 * here except setup the interrupt mask.
 	 */
 	if (ath_startrecv(sc) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to start recv logic\n");
+		DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
 		r = -EIO;
 		goto mutex_unlock;
 	}
@@ -2095,6 +2043,46 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 		goto exit;
 	}
 
+	if (sc->hw->conf.flags & IEEE80211_CONF_PS) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		/*
+		 * mac80211 does not set PM field for normal data frames, so we
+		 * need to update that based on the current PS mode.
+		 */
+		if (ieee80211_is_data(hdr->frame_control) &&
+		    !ieee80211_is_nullfunc(hdr->frame_control) &&
+		    !ieee80211_has_pm(hdr->frame_control)) {
+			DPRINTF(sc, ATH_DBG_PS, "Add PM=1 for a TX frame "
+				"while in PS mode\n");
+			hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+		}
+	}
+
+	if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
+		/*
+		 * We are using PS-Poll and mac80211 can request TX while in
+		 * power save mode. Need to wake up hardware for the TX to be
+		 * completed and if needed, also for RX of buffered frames.
+		 */
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		ath9k_ps_wakeup(sc);
+		ath9k_hw_setrxabort(sc->sc_ah, 0);
+		if (ieee80211_is_pspoll(hdr->frame_control)) {
+			DPRINTF(sc, ATH_DBG_PS, "Sending PS-Poll to pick a "
+				"buffered frame\n");
+			sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
+		} else {
+			DPRINTF(sc, ATH_DBG_PS, "Wake up to complete TX\n");
+			sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
+		}
+		/*
+		 * The actual restore operation will happen only after
+		 * the sc_flags bit is cleared. We are just dropping
+		 * the ps_usecount here.
+		 */
+		ath9k_ps_restore(sc);
+	}
+
 	memset(&txctl, 0, sizeof(struct ath_tx_control));
 
 	/*
@@ -2171,10 +2159,8 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 	} else
 		sc->rx.rxlink = NULL;
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-#endif
+	rfkill_pause_polling(sc->rf_kill.rfkill);
+
 	/* disable HAL and put h/w to sleep */
 	ath9k_hw_disable(sc->sc_ah);
 	ath9k_hw_configpcipowersave(sc->sc_ah, 1);
@@ -2257,25 +2243,10 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 		sc->imask |= ATH9K_INT_TSFOOR;
 	}
 
-	/*
-	 * Some hardware processes the TIM IE and fires an
-	 * interrupt when the TIM bit is set.  For hardware
-	 * that does, if not overridden by configuration,
-	 * enable the TIM interrupt when operating as station.
-	 */
-	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
-	    (conf->type == NL80211_IFTYPE_STATION) &&
-	    !sc->config.swBeaconProcess)
-		sc->imask |= ATH9K_INT_TIM;
-
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
-	if (conf->type == NL80211_IFTYPE_AP) {
-		/* TODO: is this a suitable place to start ANI for AP mode? */
-		/* Start ANI */
-		mod_timer(&sc->ani.timer,
-			  jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
-	}
+	if (conf->type == NL80211_IFTYPE_AP)
+		ath_start_ani(sc);
 
 out:
 	mutex_unlock(&sc->mutex);
@@ -2326,26 +2297,36 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ieee80211_conf *conf = &hw->conf;
+	struct ath_hw *ah = sc->sc_ah;
 
 	mutex_lock(&sc->mutex);
 
 	if (changed & IEEE80211_CONF_CHANGE_PS) {
 		if (conf->flags & IEEE80211_CONF_PS) {
-			if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
-				sc->imask |= ATH9K_INT_TIM_TIMER;
-				ath9k_hw_set_interrupts(sc->sc_ah,
-						sc->imask);
+			if (!(ah->caps.hw_caps &
+			      ATH9K_HW_CAP_AUTOSLEEP)) {
+				if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
+					sc->imask |= ATH9K_INT_TIM_TIMER;
+					ath9k_hw_set_interrupts(sc->sc_ah,
+							sc->imask);
+				}
+				ath9k_hw_setrxabort(sc->sc_ah, 1);
 			}
-			ath9k_hw_setrxabort(sc->sc_ah, 1);
 			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
 		} else {
 			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
-			ath9k_hw_setrxabort(sc->sc_ah, 0);
-			sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
-			if (sc->imask & ATH9K_INT_TIM_TIMER) {
-				sc->imask &= ~ATH9K_INT_TIM_TIMER;
-				ath9k_hw_set_interrupts(sc->sc_ah,
-						sc->imask);
+			if (!(ah->caps.hw_caps &
+			      ATH9K_HW_CAP_AUTOSLEEP)) {
+				ath9k_hw_setrxabort(sc->sc_ah, 0);
+				sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON |
+						  SC_OP_WAIT_FOR_CAB |
+						  SC_OP_WAIT_FOR_PSPOLL_DATA |
+						  SC_OP_WAIT_FOR_TX_ACK);
+				if (sc->imask & ATH9K_INT_TIM_TIMER) {
+					sc->imask &= ~ATH9K_INT_TIM_TIMER;
+					ath9k_hw_set_interrupts(sc->sc_ah,
+							sc->imask);
+				}
 			}
 		}
 	}
@@ -2387,114 +2368,6 @@ skip_chan_change:
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
 		sc->config.txpowlimit = 2 * conf->power_level;
 
-	/*
-	 * The HW TSF has to be reset when the beacon interval changes.
-	 * We set the flag here, and ath_beacon_config_ap() would take this
-	 * into account when it gets called through the subsequent
-	 * config_interface() call - with IFCC_BEACON in the changed field.
-	 */
-
-	if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		sc->sc_flags |= SC_OP_TSF_RESET;
-
-	mutex_unlock(&sc->mutex);
-
-	return 0;
-}
-
-static int ath9k_config_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif,
-				  struct ieee80211_if_conf *conf)
-{
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_vif *avp = (void *)vif->drv_priv;
-	u32 rfilt = 0;
-	int error, i;
-
-	mutex_lock(&sc->mutex);
-
-	/* TODO: Need to decide which hw opmode to use for multi-interface
-	 * cases */
-	if (vif->type == NL80211_IFTYPE_AP &&
-	    ah->opmode != NL80211_IFTYPE_AP) {
-		ah->opmode = NL80211_IFTYPE_STATION;
-		ath9k_hw_setopmode(ah);
-		memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
-		sc->curaid = 0;
-		ath9k_hw_write_associd(sc);
-		/* Request full reset to get hw opmode changed properly */
-		sc->sc_flags |= SC_OP_FULL_RESET;
-	}
-
-	if ((conf->changed & IEEE80211_IFCC_BSSID) &&
-	    !is_zero_ether_addr(conf->bssid)) {
-		switch (vif->type) {
-		case NL80211_IFTYPE_STATION:
-		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_MESH_POINT:
-			/* Set BSSID */
-			memcpy(sc->curbssid, conf->bssid, ETH_ALEN);
-			memcpy(avp->bssid, conf->bssid, ETH_ALEN);
-			sc->curaid = 0;
-			ath9k_hw_write_associd(sc);
-
-			/* Set aggregation protection mode parameters */
-			sc->config.ath_aggr_prot = 0;
-
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"RX filter 0x%x bssid %pM aid 0x%x\n",
-				rfilt, sc->curbssid, sc->curaid);
-
-			/* need to reconfigure the beacon */
-			sc->sc_flags &= ~SC_OP_BEACONS ;
-
-			break;
-		default:
-			break;
-		}
-	}
-
-	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
-	    (vif->type == NL80211_IFTYPE_AP) ||
-	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
-		if ((conf->changed & IEEE80211_IFCC_BEACON) ||
-		    (conf->changed & IEEE80211_IFCC_BEACON_ENABLED &&
-		     conf->enable_beacon)) {
-			/*
-			 * Allocate and setup the beacon frame.
-			 *
-			 * Stop any previous beacon DMA.  This may be
-			 * necessary, for example, when an ibss merge
-			 * causes reconfiguration; we may be called
-			 * with beacon transmission active.
-			 */
-			ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-
-			error = ath_beacon_alloc(aphy, vif);
-			if (error != 0) {
-				mutex_unlock(&sc->mutex);
-				return error;
-			}
-
-			ath_beacon_config(sc, vif);
-		}
-	}
-
-	/* Check for WLAN_CAPABILITY_PRIVACY ? */
-	if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
-		for (i = 0; i < IEEE80211_WEP_NKID; i++)
-			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
-				ath9k_hw_keysetmac(sc->sc_ah,
-						   (u16)i,
-						   sc->curbssid);
-	}
-
-	/* Only legacy IBSS for now */
-	if (vif->type == NL80211_IFTYPE_ADHOC)
-		ath_update_chainmask(sc, 0);
-
 	mutex_unlock(&sc->mutex);
 
 	return 0;
@@ -2523,8 +2396,10 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw,
 	*total_flags &= SUPPORTED_FILTERS;
 
 	sc->rx.rxfilter = *total_flags;
+	ath9k_ps_wakeup(sc);
 	rfilt = ath_calcrxfilter(sc);
 	ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
+	ath9k_ps_restore(sc);
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
 }
@@ -2562,6 +2437,8 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
 
 	mutex_lock(&sc->mutex);
 
+	memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
+
 	qi.tqi_aifs = params->aifs;
 	qi.tqi_cwmin = params->cw_min;
 	qi.tqi_cwmax = params->cw_max;
@@ -2598,7 +2475,7 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
 
 	mutex_lock(&sc->mutex);
 	ath9k_ps_wakeup(sc);
-	DPRINTF(sc, ATH_DBG_KEYCACHE, "Set HW Key\n");
+	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW Key\n");
 
 	switch (cmd) {
 	case SET_KEY:
@@ -2634,9 +2511,92 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_vif *avp = (void *)vif->drv_priv;
+	u32 rfilt = 0;
+	int error, i;
 
 	mutex_lock(&sc->mutex);
 
+	/*
+	 * TODO: Need to decide which hw opmode to use for
+	 *       multi-interface cases
+	 * XXX: This belongs into add_interface!
+	 */
+	if (vif->type == NL80211_IFTYPE_AP &&
+	    ah->opmode != NL80211_IFTYPE_AP) {
+		ah->opmode = NL80211_IFTYPE_STATION;
+		ath9k_hw_setopmode(ah);
+		memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
+		sc->curaid = 0;
+		ath9k_hw_write_associd(sc);
+		/* Request full reset to get hw opmode changed properly */
+		sc->sc_flags |= SC_OP_FULL_RESET;
+	}
+
+	if ((changed & BSS_CHANGED_BSSID) &&
+	    !is_zero_ether_addr(bss_conf->bssid)) {
+		switch (vif->type) {
+		case NL80211_IFTYPE_STATION:
+		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_MESH_POINT:
+			/* Set BSSID */
+			memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
+			memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
+			sc->curaid = 0;
+			ath9k_hw_write_associd(sc);
+
+			/* Set aggregation protection mode parameters */
+			sc->config.ath_aggr_prot = 0;
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"RX filter 0x%x bssid %pM aid 0x%x\n",
+				rfilt, sc->curbssid, sc->curaid);
+
+			/* need to reconfigure the beacon */
+			sc->sc_flags &= ~SC_OP_BEACONS ;
+
+			break;
+		default:
+			break;
+		}
+	}
+
+	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
+	    (vif->type == NL80211_IFTYPE_AP) ||
+	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
+		if ((changed & BSS_CHANGED_BEACON) ||
+		    (changed & BSS_CHANGED_BEACON_ENABLED &&
+		     bss_conf->enable_beacon)) {
+			/*
+			 * Allocate and setup the beacon frame.
+			 *
+			 * Stop any previous beacon DMA.  This may be
+			 * necessary, for example, when an ibss merge
+			 * causes reconfiguration; we may be called
+			 * with beacon transmission active.
+			 */
+			ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+
+			error = ath_beacon_alloc(aphy, vif);
+			if (!error)
+				ath_beacon_config(sc, vif);
+		}
+	}
+
+	/* Check for WLAN_CAPABILITY_PRIVACY ? */
+	if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
+		for (i = 0; i < IEEE80211_WEP_NKID; i++)
+			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
+				ath9k_hw_keysetmac(sc->sc_ah,
+						   (u16)i,
+						   sc->curbssid);
+	}
+
+	/* Only legacy IBSS for now */
+	if (vif->type == NL80211_IFTYPE_ADHOC)
+		ath_update_chainmask(sc, 0);
+
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
 		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
 			bss_conf->use_short_preamble);
@@ -2662,6 +2622,18 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 		ath9k_bss_assoc_info(sc, vif, bss_conf);
 	}
 
+	/*
+	 * The HW TSF has to be reset when the beacon interval changes.
+	 * We set the flag here, and ath_beacon_config_ap() would take this
+	 * into account when it gets called through the subsequent
+	 * config_interface() call - with IFCC_BEACON in the changed field.
+	 */
+
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		sc->sc_flags |= SC_OP_TSF_RESET;
+		sc->beacon_interval = bss_conf->beacon_int;
+	}
+
 	mutex_unlock(&sc->mutex);
 }
 
@@ -2771,6 +2743,7 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
 	mutex_lock(&sc->mutex);
 	aphy->state = ATH_WIPHY_ACTIVE;
 	sc->sc_flags &= ~SC_OP_SCANNING;
+	sc->sc_flags |= SC_OP_FULL_RESET;
 	mutex_unlock(&sc->mutex);
 }
 
@@ -2781,7 +2754,6 @@ struct ieee80211_ops ath9k_ops = {
 	.add_interface 	    = ath9k_add_interface,
 	.remove_interface   = ath9k_remove_interface,
 	.config 	    = ath9k_config,
-	.config_interface   = ath9k_config_interface,
 	.configure_filter   = ath9k_configure_filter,
 	.sta_notify         = ath9k_sta_notify,
 	.conf_tx 	    = ath9k_conf_tx,
diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 168411d322a..ccdf20a2e9b 100644
--- a/drivers/net/wireless/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -227,11 +227,6 @@ static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-#endif
-
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
@@ -256,16 +251,6 @@ static int ath_pci_resume(struct pci_dev *pdev)
 			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-	/*
-	 * check the h/w rfkill state on resume
-	 * and start the rfkill poll timer
-	 */
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		queue_delayed_work(sc->hw->workqueue,
-				   &sc->rf_kill.rfkill_poll, 0);
-#endif
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c
index 8bcba906929..aaa941561c3 100644
--- a/drivers/net/wireless/ath9k/phy.c
+++ b/drivers/net/wireless/ath/ath9k/phy.c
@@ -46,7 +46,7 @@ ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 			channelSel = ((freq - 704) * 2 - 3040) / 10;
 			bModeSynth = 1;
 		} else {
-			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 				"Invalid channel %u MHz\n", freq);
 			return false;
 		}
@@ -79,7 +79,7 @@ ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
 		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
 	} else {
-		DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL,
+		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
 			"Invalid channel %u MHz\n", freq);
 		return false;
 	}
@@ -96,9 +96,8 @@ ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 	return true;
 }
 
-bool
-ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
-			    struct ath9k_channel *chan)
+void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
+				 struct ath9k_channel *chan)
 {
 	u16 bMode, fracMode, aModeRefSel = 0;
 	u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0;
@@ -169,8 +168,6 @@ ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
 
 	ah->curchan = chan;
 	ah->curchan_rad_index = -1;
-
-	return true;
 }
 
 static void
diff --git a/drivers/net/wireless/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index 0f7f8e0c9c9..c70f530642f 100644
--- a/drivers/net/wireless/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -17,7 +17,7 @@
 #ifndef PHY_H
 #define PHY_H
 
-bool ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
+void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
 				 struct ath9k_channel
 				 *chan);
 bool ath9k_hw_set_channel(struct ath_hw *ah,
@@ -556,9 +556,6 @@ bool ath9k_hw_init_rf(struct ath_hw *ah,
 		int r;							\
 		for (r = 0; r < ((iniarray)->ia_rows); r++) {		\
 			REG_WRITE(ah, INI_RA((iniarray), r, 0), (regData)[r]); \
-			DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, \
-				"RF 0x%x V 0x%x\n", \
-				INI_RA((iniarray), r, 0), (regData)[r]); \
 			DO_DELAY(regWr);				\
 		}							\
 	} while (0)
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 824ccbb8b7b..ba06e78b2f5 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -17,7 +17,7 @@
 
 #include "ath9k.h"
 
-static struct ath_rate_table ar5416_11na_ratetable = {
+static const struct ath_rate_table ar5416_11na_ratetable = {
 	42,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
@@ -155,7 +155,7 @@ static struct ath_rate_table ar5416_11na_ratetable = {
 /* 4ms frame limit not used for NG mode.  The values filled
  * for HT are the 64K max aggregate limit */
 
-static struct ath_rate_table ar5416_11ng_ratetable = {
+static const struct ath_rate_table ar5416_11ng_ratetable = {
 	46,
 	{
 		{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -302,7 +302,7 @@ static struct ath_rate_table ar5416_11ng_ratetable = {
 	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
 };
 
-static struct ath_rate_table ar5416_11a_ratetable = {
+static const struct ath_rate_table ar5416_11a_ratetable = {
 	8,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
@@ -335,7 +335,7 @@ static struct ath_rate_table ar5416_11a_ratetable = {
 	0,   /* Phy rates allowed initially */
 };
 
-static struct ath_rate_table ar5416_11g_ratetable = {
+static const struct ath_rate_table ar5416_11g_ratetable = {
 	12,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -380,7 +380,7 @@ static struct ath_rate_table ar5416_11g_ratetable = {
 	0,   /* Phy rates allowed initially */
 };
 
-static struct ath_rate_table ar5416_11b_ratetable = {
+static const struct ath_rate_table ar5416_11b_ratetable = {
 	4,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -420,7 +420,7 @@ static inline int8_t median(int8_t a, int8_t b, int8_t c)
 	}
 }
 
-static void ath_rc_sort_validrates(struct ath_rate_table *rate_table,
+static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table,
 				   struct ath_rate_priv *ath_rc_priv)
 {
 	u8 i, j, idx, idx_next;
@@ -461,10 +461,11 @@ static inline int ath_rc_isvalid_txmask(struct ath_rate_priv *ath_rc_priv,
 	return ath_rc_priv->valid_rate_index[index];
 }
 
-static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table,
-					      struct ath_rate_priv *ath_rc_priv,
-					      u8 cur_valid_txrate,
-					      u8 *next_idx)
+static inline
+int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table,
+				struct ath_rate_priv *ath_rc_priv,
+				u8 cur_valid_txrate,
+				u8 *next_idx)
 {
 	u8 i;
 
@@ -500,7 +501,7 @@ static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
 }
 
 static inline int
-ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table,
+ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table,
 				 struct ath_rate_priv *ath_rc_priv,
 				 u8 cur_valid_txrate, u8 *next_idx)
 {
@@ -517,14 +518,14 @@ ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table,
 }
 
 static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv,
-				 struct ath_rate_table *rate_table,
+				 const struct ath_rate_table *rate_table,
 				 u32 capflag)
 {
 	u8 i, hi = 0;
 	u32 valid;
 
 	for (i = 0; i < rate_table->rate_cnt; i++) {
-		valid = (ath_rc_priv->single_stream ?
+		valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
 			 rate_table->info[i].valid_single_stream :
 			 rate_table->info[i].valid);
 		if (valid == 1) {
@@ -547,7 +548,7 @@ static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv,
 }
 
 static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
-				struct ath_rate_table *rate_table,
+				const struct ath_rate_table *rate_table,
 				struct ath_rateset *rateset,
 				u32 capflag)
 {
@@ -557,9 +558,9 @@ static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
 	for (i = 0; i < rateset->rs_nrates; i++) {
 		for (j = 0; j < rate_table->rate_cnt; j++) {
 			u32 phy = rate_table->info[j].phy;
-			u32 valid = (ath_rc_priv->single_stream ?
-				rate_table->info[j].valid_single_stream :
-				rate_table->info[j].valid);
+			u32 valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
+				     rate_table->info[j].valid_single_stream :
+				     rate_table->info[j].valid);
 			u8 rate = rateset->rs_rates[i];
 			u8 dot11rate = rate_table->info[j].dot11rate;
 
@@ -592,7 +593,7 @@ static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
 }
 
 static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
-				  struct ath_rate_table *rate_table,
+				  const struct ath_rate_table *rate_table,
 				  u8 *mcs_set, u32 capflag)
 {
 	struct ath_rateset *rateset = (struct ath_rateset *)mcs_set;
@@ -603,7 +604,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
 	for (i = 0; i < rateset->rs_nrates; i++) {
 		for (j = 0; j < rate_table->rate_cnt; j++) {
 			u32 phy = rate_table->info[j].phy;
-			u32 valid = (ath_rc_priv->single_stream ?
+			u32 valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
 				     rate_table->info[j].valid_single_stream :
 				     rate_table->info[j].valid);
 			u8 rate = rateset->rs_rates[i];
@@ -630,7 +631,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
 
 static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
 			     struct ath_rate_priv *ath_rc_priv,
-			     struct ath_rate_table *rate_table,
+			     const struct ath_rate_table *rate_table,
 			     int *is_probing)
 {
 	u32 dt, best_thruput, this_thruput, now_msec;
@@ -740,14 +741,15 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
 	if (rate > (ath_rc_priv->rate_table_size - 1))
 		rate = ath_rc_priv->rate_table_size - 1;
 
-	ASSERT((rate_table->info[rate].valid && !ath_rc_priv->single_stream) ||
+	ASSERT((rate_table->info[rate].valid &&
+		(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)) ||
 	       (rate_table->info[rate].valid_single_stream &&
-		ath_rc_priv->single_stream));
+		!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)));
 
 	return rate;
 }
 
-static void ath_rc_rate_set_series(struct ath_rate_table *rate_table,
+static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table,
 				   struct ieee80211_tx_rate *rate,
 				   struct ieee80211_tx_rate_control *txrc,
 				   u8 tries, u8 rix, int rtsctsenable)
@@ -768,7 +770,7 @@ static void ath_rc_rate_set_series(struct ath_rate_table *rate_table,
 }
 
 static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
-				   struct ath_rate_table *rate_table,
+				   const struct ath_rate_table *rate_table,
 				   struct ieee80211_tx_info *tx_info)
 {
 	struct ieee80211_tx_rate *rates = tx_info->control.rates;
@@ -806,12 +808,12 @@ static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
 
 static u8 ath_rc_rate_getidx(struct ath_softc *sc,
 			     struct ath_rate_priv *ath_rc_priv,
-			     struct ath_rate_table *rate_table,
+			     const struct ath_rate_table *rate_table,
 			     u8 rix, u16 stepdown,
 			     u16 min_rate)
 {
 	u32 j;
-	u8 nextindex;
+	u8 nextindex = 0;
 
 	if (min_rate) {
 		for (j = RATE_TABLE_SIZE; j > 0; j--) {
@@ -837,7 +839,7 @@ static void ath_rc_ratefind(struct ath_softc *sc,
 			    struct ath_rate_priv *ath_rc_priv,
 			    struct ieee80211_tx_rate_control *txrc)
 {
-	struct ath_rate_table *rate_table;
+	const struct ath_rate_table *rate_table;
 	struct sk_buff *skb = txrc->skb;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_tx_rate *rates = tx_info->control.rates;
@@ -936,7 +938,7 @@ static void ath_rc_ratefind(struct ath_softc *sc,
 }
 
 static bool ath_rc_update_per(struct ath_softc *sc,
-			      struct ath_rate_table *rate_table,
+			      const struct ath_rate_table *rate_table,
 			      struct ath_rate_priv *ath_rc_priv,
 			      struct ath_tx_info_priv *tx_info_priv,
 			      int tx_rate, int xretries, int retries,
@@ -1141,7 +1143,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
 	int rate;
 	u8 last_per;
 	bool state_change = false;
-	struct ath_rate_table *rate_table = sc->cur_rate_table;
+	const struct ath_rate_table *rate_table = sc->cur_rate_table;
 	int size = ath_rc_priv->rate_table_size;
 
 	if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
@@ -1275,7 +1277,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
 #undef CHK_RSSI
 }
 
-static int ath_rc_get_rateindex(struct ath_rate_table *rate_table,
+static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
 				struct ieee80211_tx_rate *rate)
 {
 	int rix;
@@ -1299,7 +1301,7 @@ static void ath_rc_tx_status(struct ath_softc *sc,
 			     int final_ts_idx, int xretries, int long_retry)
 {
 	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
-	struct ath_rate_table *rate_table;
+	const struct ath_rate_table *rate_table;
 	struct ieee80211_tx_rate *rates = tx_info->status.rates;
 	u8 flags;
 	u32 i = 0, rix;
@@ -1320,7 +1322,7 @@ static void ath_rc_tx_status(struct ath_softc *sc,
 				 * 40 to 20 => don't update */
 
 				if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
-				    (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG))
+				    !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG))
 					return;
 
 				rix = ath_rc_get_rateindex(rate_table, &rates[i]);
@@ -1345,18 +1347,19 @@ static void ath_rc_tx_status(struct ath_softc *sc,
 
 	/* If HT40 and we have switched mode from 40 to 20 => don't update */
 	if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
-	    (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) {
+	    !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG))
 		return;
-	}
 
 	rix = ath_rc_get_rateindex(rate_table, &rates[i]);
 	ath_rc_update_ht(sc, ath_rc_priv, tx_info_priv, rix,
 			 xretries, long_retry);
 }
 
-static struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
-						    enum ieee80211_band band,
-						    bool is_ht, bool is_cw_40)
+static const
+struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
+					     enum ieee80211_band band,
+					     bool is_ht,
+					     bool is_cw_40)
 {
 	int mode = 0;
 
@@ -1390,7 +1393,7 @@ static void ath_rc_init(struct ath_softc *sc,
 			struct ath_rate_priv *ath_rc_priv,
 			struct ieee80211_supported_band *sband,
 			struct ieee80211_sta *sta,
-			struct ath_rate_table *rate_table)
+			const struct ath_rate_table *rate_table)
 {
 	struct ath_rateset *rateset = &ath_rc_priv->neg_rates;
 	u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates;
@@ -1420,10 +1423,6 @@ static void ath_rc_init(struct ath_softc *sc,
 			ath_rc_priv->valid_phy_rateidx[i][j] = 0;
 		ath_rc_priv->valid_phy_ratecnt[i] = 0;
 	}
-	ath_rc_priv->rc_phy_mode = ath_rc_priv->ht_cap & WLAN_RC_40_FLAG;
-
-	/* Set stream capability */
-	ath_rc_priv->single_stream = (ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ? 0 : 1;
 
 	if (!rateset->rs_nrates) {
 		/* No working rate, just initialize valid rates */
@@ -1572,12 +1571,13 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
 	__le16 fc = hdr->frame_control;
 
-	/* lowest rate for management and multicast/broadcast frames */
-	if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
-	    !sta) {
+	/* lowest rate for management and NO_ACK frames */
+	if (!ieee80211_is_data(fc) ||
+	    tx_info->flags & IEEE80211_TX_CTL_NO_ACK || !sta) {
 		tx_info->control.rates[0].idx = rate_lowest_index(sband, sta);
 		tx_info->control.rates[0].count =
-			is_multicast_ether_addr(hdr->addr1) ? 1 : ATH_MGT_TXMAXTRY;
+			(tx_info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+				1 : ATH_MGT_TXMAXTRY;
 		return;
 	}
 
@@ -1590,7 +1590,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	struct ath_rate_table *rate_table = NULL;
+	const struct ath_rate_table *rate_table = NULL;
 	bool is_cw40, is_sgi40;
 	int i, j = 0;
 
@@ -1639,7 +1639,7 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	struct ath_rate_table *rate_table = NULL;
+	const struct ath_rate_table *rate_table = NULL;
 	bool oper_cw40 = false, oper_sgi40;
 	bool local_cw40 = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG) ?
 		true : false;
diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index 199a3ce57d6..e3abd76103f 100644
--- a/drivers/net/wireless/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -24,7 +24,6 @@ struct ath_softc;
 #define ATH_RATE_MAX     30
 #define RATE_TABLE_SIZE  64
 #define MAX_TX_RATE_PHY  48
-#define WLAN_CTRL_FRAME_SIZE (2+2+6+4)
 
 /* VALID_ALL - valid for 20/40/Legacy,
  * VALID - Legacy only,
@@ -158,7 +157,6 @@ struct ath_rateset {
  * @probe_interval: interval for ratectrl to probe for other rates
  * @prev_data_rix: rate idx of last data frame
  * @ht_cap: HT capabilities
- * @single_stream: When TRUE, only single TX stream possible
  * @neg_rates: Negotatied rates
  * @neg_ht_rates: Negotiated HT rates
  */
@@ -176,10 +174,8 @@ struct ath_rate_priv {
 	u8 max_valid_rate;
 	u8 valid_rate_index[RATE_TABLE_SIZE];
 	u8 ht_cap;
-	u8 single_stream;
 	u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
 	u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
-	u8 rc_phy_mode;
 	u8 rate_max_phy;
 	u32 rssi_time;
 	u32 rssi_down_time;
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index dd1f3015674..5014a19b0f7 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -283,54 +283,51 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
 	struct ath_buf *bf;
 	int error = 0;
 
-	do {
-		spin_lock_init(&sc->rx.rxflushlock);
-		sc->sc_flags &= ~SC_OP_RXFLUSH;
-		spin_lock_init(&sc->rx.rxbuflock);
-
-		sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
-					   min(sc->cachelsz,
-					       (u16)64));
+	spin_lock_init(&sc->rx.rxflushlock);
+	sc->sc_flags &= ~SC_OP_RXFLUSH;
+	spin_lock_init(&sc->rx.rxbuflock);
 
-		DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
-			sc->cachelsz, sc->rx.bufsize);
+	sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
+				 min(sc->cachelsz, (u16)64));
 
-		/* Initialize rx descriptors */
+	DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+		sc->cachelsz, sc->rx.bufsize);
 
-		error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
-					  "rx", nbufs, 1);
-		if (error != 0) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"failed to allocate rx descriptors: %d\n", error);
-			break;
-		}
+	/* Initialize rx descriptors */
 
-		list_for_each_entry(bf, &sc->rx.rxbuf, list) {
-			skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_KERNEL);
-			if (skb == NULL) {
-				error = -ENOMEM;
-				break;
-			}
+	error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
+				  "rx", nbufs, 1);
+	if (error != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"failed to allocate rx descriptors: %d\n", error);
+		goto err;
+	}
 
-			bf->bf_mpdu = skb;
-			bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
-							 sc->rx.bufsize,
-							 DMA_FROM_DEVICE);
-			if (unlikely(dma_mapping_error(sc->dev,
-				  bf->bf_buf_addr))) {
-				dev_kfree_skb_any(skb);
-				bf->bf_mpdu = NULL;
-				DPRINTF(sc, ATH_DBG_CONFIG,
-					"dma_mapping_error() on RX init\n");
-				error = -ENOMEM;
-				break;
-			}
-			bf->bf_dmacontext = bf->bf_buf_addr;
+	list_for_each_entry(bf, &sc->rx.rxbuf, list) {
+		skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_KERNEL);
+		if (skb == NULL) {
+			error = -ENOMEM;
+			goto err;
 		}
-		sc->rx.rxlink = NULL;
 
-	} while (0);
+		bf->bf_mpdu = skb;
+		bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
+						 sc->rx.bufsize,
+						 DMA_FROM_DEVICE);
+		if (unlikely(dma_mapping_error(sc->dev,
+					       bf->bf_buf_addr))) {
+			dev_kfree_skb_any(skb);
+			bf->bf_mpdu = NULL;
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"dma_mapping_error() on RX init\n");
+			error = -ENOMEM;
+			goto err;
+		}
+		bf->bf_dmacontext = bf->bf_buf_addr;
+	}
+	sc->rx.rxlink = NULL;
 
+err:
 	if (error)
 		ath_rx_cleanup(sc);
 
@@ -345,10 +342,8 @@ void ath_rx_cleanup(struct ath_softc *sc)
 	list_for_each_entry(bf, &sc->rx.rxbuf, list) {
 		skb = bf->bf_mpdu;
 		if (skb) {
-			dma_unmap_single(sc->dev,
-					 bf->bf_buf_addr,
-					 sc->rx.bufsize,
-					 DMA_FROM_DEVICE);
+			dma_unmap_single(sc->dev, bf->bf_buf_addr,
+					 sc->rx.bufsize, DMA_FROM_DEVICE);
 			dev_kfree_skb(skb);
 		}
 	}
@@ -478,6 +473,159 @@ void ath_flushrecv(struct ath_softc *sc)
 	spin_unlock_bh(&sc->rx.rxflushlock);
 }
 
+static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
+{
+	/* Check whether the Beacon frame has DTIM indicating buffered bc/mc */
+	struct ieee80211_mgmt *mgmt;
+	u8 *pos, *end, id, elen;
+	struct ieee80211_tim_ie *tim;
+
+	mgmt = (struct ieee80211_mgmt *)skb->data;
+	pos = mgmt->u.beacon.variable;
+	end = skb->data + skb->len;
+
+	while (pos + 2 < end) {
+		id = *pos++;
+		elen = *pos++;
+		if (pos + elen > end)
+			break;
+
+		if (id == WLAN_EID_TIM) {
+			if (elen < sizeof(*tim))
+				break;
+			tim = (struct ieee80211_tim_ie *) pos;
+			if (tim->dtim_count != 0)
+				break;
+			return tim->bitmap_ctrl & 0x01;
+		}
+
+		pos += elen;
+	}
+
+	return false;
+}
+
+static void ath_rx_ps_back_to_sleep(struct ath_softc *sc)
+{
+	sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB);
+}
+
+static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ieee80211_mgmt *mgmt;
+
+	if (skb->len < 24 + 8 + 2 + 2)
+		return;
+
+	mgmt = (struct ieee80211_mgmt *)skb->data;
+	if (memcmp(sc->curbssid, mgmt->bssid, ETH_ALEN) != 0)
+		return; /* not from our current AP */
+
+	if (sc->sc_flags & SC_OP_BEACON_SYNC) {
+		sc->sc_flags &= ~SC_OP_BEACON_SYNC;
+		DPRINTF(sc, ATH_DBG_PS, "Reconfigure Beacon timers based on "
+			"timestamp from the AP\n");
+		ath_beacon_config(sc, NULL);
+	}
+
+	if (!(sc->hw->conf.flags & IEEE80211_CONF_PS)) {
+		/* We are not in PS mode anymore; remain awake */
+		DPRINTF(sc, ATH_DBG_PS, "Not in PS mode anymore, remain "
+			"awake\n");
+		sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB);
+		return;
+	}
+
+	if (ath_beacon_dtim_pending_cab(skb)) {
+		/*
+		 * Remain awake waiting for buffered broadcast/multicast
+		 * frames.
+		 */
+		DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
+			"buffered broadcast/multicast frame(s)\n");
+		sc->sc_flags |= SC_OP_WAIT_FOR_CAB;
+		return;
+	}
+
+	if (sc->sc_flags & SC_OP_WAIT_FOR_CAB) {
+		/*
+		 * This can happen if a broadcast frame is dropped or the AP
+		 * fails to send a frame indicating that all CAB frames have
+		 * been delivered.
+		 */
+		DPRINTF(sc, ATH_DBG_PS, "PS wait for CAB frames timed out\n");
+	}
+
+	/* No more broadcast/multicast frames to be received at this point. */
+	ath_rx_ps_back_to_sleep(sc);
+}
+
+static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+
+	/* Process Beacon and CAB receive in PS state */
+	if ((sc->sc_flags & SC_OP_WAIT_FOR_BEACON) &&
+	    ieee80211_is_beacon(hdr->frame_control))
+		ath_rx_ps_beacon(sc, skb);
+	else if ((sc->sc_flags & SC_OP_WAIT_FOR_CAB) &&
+		 (ieee80211_is_data(hdr->frame_control) ||
+		  ieee80211_is_action(hdr->frame_control)) &&
+		 is_multicast_ether_addr(hdr->addr1) &&
+		 !ieee80211_has_moredata(hdr->frame_control)) {
+		DPRINTF(sc, ATH_DBG_PS, "All PS CAB frames received, back to "
+			"sleep\n");
+		/*
+		 * No more broadcast/multicast frames to be received at this
+		 * point.
+		 */
+		ath_rx_ps_back_to_sleep(sc);
+	} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
+		   !is_multicast_ether_addr(hdr->addr1) &&
+		   !ieee80211_has_morefrags(hdr->frame_control)) {
+		sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
+		DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
+			"received PS-Poll data (0x%x)\n",
+			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+					SC_OP_WAIT_FOR_CAB |
+					SC_OP_WAIT_FOR_PSPOLL_DATA |
+					SC_OP_WAIT_FOR_TX_ACK));
+	}
+}
+
+static void ath_rx_send_to_mac80211(struct ath_softc *sc, struct sk_buff *skb,
+				    struct ieee80211_rx_status *rx_status)
+{
+	struct ieee80211_hdr *hdr;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+
+	/* Send the frame to mac80211 */
+	if (is_multicast_ether_addr(hdr->addr1)) {
+		int i;
+		/*
+		 * Deliver broadcast/multicast frames to all suitable
+		 * virtual wiphys.
+		 */
+		/* TODO: filter based on channel configuration */
+		for (i = 0; i < sc->num_sec_wiphy; i++) {
+			struct ath_wiphy *aphy = sc->sec_wiphy[i];
+			struct sk_buff *nskb;
+			if (aphy == NULL)
+				continue;
+			nskb = skb_copy(skb, GFP_ATOMIC);
+			if (nskb)
+				__ieee80211_rx(aphy->hw, nskb, rx_status);
+		}
+		__ieee80211_rx(sc->hw, skb, rx_status);
+	} else {
+		/* Deliver unicast frames based on receiver address */
+		__ieee80211_rx(ath_get_virt_hw(sc, hdr), skb, rx_status);
+	}
+}
+
 int ath_rx_tasklet(struct ath_softc *sc, int flush)
 {
 #define PA2DESC(_sc, _pa)                                               \
@@ -627,7 +775,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 
 		if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) {
 			rx_status.flag |= RX_FLAG_DECRYPTED;
-		} else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED)
+		} else if (ieee80211_has_protected(fc)
 			   && !decrypt_error && skb->len >= hdrlen + 4) {
 			keyix = skb->data[hdrlen + 3] >> 6;
 
@@ -636,36 +784,11 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 		}
 		if (ah->sw_mgmt_crypto &&
 		    (rx_status.flag & RX_FLAG_DECRYPTED) &&
-		    ieee80211_is_mgmt(hdr->frame_control)) {
+		    ieee80211_is_mgmt(fc)) {
 			/* Use software decrypt for management frames. */
 			rx_status.flag &= ~RX_FLAG_DECRYPTED;
 		}
 
-		/* Send the frame to mac80211 */
-		if (hdr->addr1[5] & 0x01) {
-			int i;
-			/*
-			 * Deliver broadcast/multicast frames to all suitable
-			 * virtual wiphys.
-			 */
-			/* TODO: filter based on channel configuration */
-			for (i = 0; i < sc->num_sec_wiphy; i++) {
-				struct ath_wiphy *aphy = sc->sec_wiphy[i];
-				struct sk_buff *nskb;
-				if (aphy == NULL)
-					continue;
-				nskb = skb_copy(skb, GFP_ATOMIC);
-				if (nskb)
-					__ieee80211_rx(aphy->hw, nskb,
-						       &rx_status);
-			}
-			__ieee80211_rx(sc->hw, skb, &rx_status);
-		} else {
-			/* Deliver unicast frames based on receiver address */
-			__ieee80211_rx(ath_get_virt_hw(sc, hdr), skb,
-				       &rx_status);
-		}
-
 		/* We will now give hardware our shiny new allocated skb */
 		bf->bf_mpdu = requeue_skb;
 		bf->bf_buf_addr = dma_map_single(sc->dev, requeue_skb->data,
@@ -675,8 +798,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 			  bf->bf_buf_addr))) {
 			dev_kfree_skb_any(requeue_skb);
 			bf->bf_mpdu = NULL;
-			DPRINTF(sc, ATH_DBG_CONFIG,
+			DPRINTF(sc, ATH_DBG_FATAL,
 				"dma_mapping_error() on RX\n");
+			ath_rx_send_to_mac80211(sc, skb, &rx_status);
 			break;
 		}
 		bf->bf_dmacontext = bf->bf_buf_addr;
@@ -692,11 +816,12 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 			sc->rx.rxotherant = 0;
 		}
 
-		if (ieee80211_is_beacon(fc) &&
-				(sc->sc_flags & SC_OP_WAIT_FOR_BEACON)) {
-			sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
-			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
-		}
+		if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+					     SC_OP_WAIT_FOR_PSPOLL_DATA)))
+			ath_rx_ps(sc, skb);
+
+		ath_rx_send_to_mac80211(sc, skb, &rx_status);
+
 requeue:
 		list_move_tail(&bf->list, &sc->rx.rxbuf);
 		ath_rx_buf_link(sc, bf);
diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 52605246679..52605246679 100644
--- a/drivers/net/wireless/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
diff --git a/drivers/net/wireless/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c
index 1ff429b027d..1ff429b027d 100644
--- a/drivers/net/wireless/ath9k/virtual.c
+++ b/drivers/net/wireless/ath/ath9k/virtual.c
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 689bdbf7880..b61a071788a 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -283,7 +283,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
 	bool rc_update = true;
 
-	skb = (struct sk_buff *)bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 	hdr = (struct ieee80211_hdr *)skb->data;
 
 	rcu_read_lock();
@@ -380,8 +380,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 			ath_tx_complete_buf(sc, bf, &bf_head, !txfail, sendbar);
 		} else {
 			/* retry the un-acked ones */
-			if (bf->bf_next == NULL &&
-			    bf_last->bf_status & ATH_BUFSTATUS_STALE) {
+			if (bf->bf_next == NULL && bf_last->bf_stale) {
 				struct ath_buf *tbf;
 
 				tbf = ath_clone_txbuf(sc, bf_last);
@@ -435,7 +434,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 			   struct ath_atx_tid *tid)
 {
-	struct ath_rate_table *rate_table = sc->cur_rate_table;
+	const struct ath_rate_table *rate_table = sc->cur_rate_table;
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
 	struct ieee80211_tx_rate *rates;
@@ -444,7 +443,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 	u16 aggr_limit, legacy = 0, maxampdu;
 	int i;
 
-	skb = (struct sk_buff *)bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 	tx_info = IEEE80211_SKB_CB(skb);
 	rates = tx_info->control.rates;
 	tx_info_priv = (struct ath_tx_info_priv *)tx_info->rate_driver_data[0];
@@ -498,7 +497,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
 				  struct ath_buf *bf, u16 frmlen)
 {
-	struct ath_rate_table *rt = sc->cur_rate_table;
+	const struct ath_rate_table *rt = sc->cur_rate_table;
 	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	u32 nsymbits, nsymbols, mpdudensity;
@@ -712,6 +711,7 @@ int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
 		return 0;
 
 	if (!(txtid->state & AGGR_ADDBA_COMPLETE)) {
+		txtid->state &= ~AGGR_ADDBA_PROGRESS;
 		txtid->addba_exchangeattempts = 0;
 		return 0;
 	}
@@ -972,7 +972,7 @@ int ath_cabq_update(struct ath_softc *sc)
 	else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
 		sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
 
-	qi.tqi_readyTime = (sc->hw->conf.beacon_int *
+	qi.tqi_readyTime = (sc->beacon_interval *
 			    sc->config.cabqReadytime) / 100;
 	ath_txq_update(sc, qnum, &qi);
 
@@ -1004,7 +1004,7 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
 
 		bf = list_first_entry(&txq->axq_q, struct ath_buf, list);
 
-		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+		if (bf->bf_stale) {
 			list_del(&bf->list);
 			spin_unlock_bh(&txq->axq_lock);
 
@@ -1071,7 +1071,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, true);
 		if (r)
 			DPRINTF(sc, ATH_DBG_FATAL,
-				"Unable to reset hardware; reset status %u\n",
+				"Unable to reset hardware; reset status %d\n",
 				r);
 		spin_unlock_bh(&sc->sc_resetlock);
 	}
@@ -1408,7 +1408,7 @@ static int setup_tx_flags(struct ath_softc *sc, struct sk_buff *skb,
 static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
 			    int width, int half_gi, bool shortPreamble)
 {
-	struct ath_rate_table *rate_table = sc->cur_rate_table;
+	const struct ath_rate_table *rate_table = sc->cur_rate_table;
 	u32 nbits, nsymbits, duration, nsymbols;
 	u8 rc;
 	int streams, pktlen;
@@ -1440,7 +1440,7 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
 
 static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 {
-	struct ath_rate_table *rt = sc->cur_rate_table;
+	const struct ath_rate_table *rt = sc->cur_rate_table;
 	struct ath9k_11n_rate_series series[4];
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
@@ -1452,7 +1452,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 
 	memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4);
 
-	skb = (struct sk_buff *)bf->bf_mpdu;
+	skb = bf->bf_mpdu;
 	tx_info = IEEE80211_SKB_CB(skb);
 	rates = tx_info->control.rates;
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -1573,8 +1573,9 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 					   skb->len, DMA_TO_DEVICE);
 	if (unlikely(dma_mapping_error(sc->dev, bf->bf_dmacontext))) {
 		bf->bf_mpdu = NULL;
-		DPRINTF(sc, ATH_DBG_CONFIG,
-			"dma_mapping_error() on TX\n");
+		kfree(tx_info_priv);
+		tx_info->rate_driver_data[0] = NULL;
+		DPRINTF(sc, ATH_DBG_FATAL, "dma_mapping_error() on TX\n");
 		return -ENOMEM;
 	}
 
@@ -1586,7 +1587,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
 			     struct ath_tx_control *txctl)
 {
-	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_tx_info *tx_info =  IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ath_node *an = NULL;
@@ -1790,6 +1791,16 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		skb_pull(skb, padsize);
 	}
 
+	if (sc->sc_flags & SC_OP_WAIT_FOR_TX_ACK) {
+		sc->sc_flags &= ~SC_OP_WAIT_FOR_TX_ACK;
+		DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
+			"received TX status (0x%x)\n",
+			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+					SC_OP_WAIT_FOR_CAB |
+					SC_OP_WAIT_FOR_PSPOLL_DATA |
+					SC_OP_WAIT_FOR_TX_ACK));
+	}
+
 	if (frame_type == ATH9K_NOT_INTERNAL)
 		ieee80211_tx_status(hw, skb);
 	else
@@ -1860,7 +1871,7 @@ static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf,
 static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds,
 			     int nbad, int txok, bool update_rc)
 {
-	struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
+	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
@@ -1941,7 +1952,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 		 * it with the STALE flag.
 		 */
 		bf_held = NULL;
-		if (bf->bf_status & ATH_BUFSTATUS_STALE) {
+		if (bf->bf_stale) {
 			bf_held = bf;
 			if (list_is_last(&bf_held->list, &txq->axq_q)) {
 				txq->axq_link = NULL;
@@ -1982,7 +1993,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 		 * however leave the last descriptor back as the holding
 		 * descriptor for hw.
 		 */
-		lastbf->bf_status |= ATH_BUFSTATUS_STALE;
+		lastbf->bf_stale = true;
 		INIT_LIST_HEAD(&bf_head);
 		if (!list_is_singular(&lastbf->list))
 			list_cut_position(&bf_head,
@@ -2048,44 +2059,38 @@ int ath_tx_init(struct ath_softc *sc, int nbufs)
 {
 	int error = 0;
 
-	do {
-		spin_lock_init(&sc->tx.txbuflock);
-
-		error = ath_descdma_setup(sc, &sc->tx.txdma, &sc->tx.txbuf,
-			"tx", nbufs, 1);
-		if (error != 0) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"Failed to allocate tx descriptors: %d\n",
-				error);
-			break;
-		}
+	spin_lock_init(&sc->tx.txbuflock);
 
-		error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf,
-					  "beacon", ATH_BCBUF, 1);
-		if (error != 0) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"Failed to allocate beacon descriptors: %d\n",
-				error);
-			break;
-		}
+	error = ath_descdma_setup(sc, &sc->tx.txdma, &sc->tx.txbuf,
+				  "tx", nbufs, 1);
+	if (error != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"Failed to allocate tx descriptors: %d\n", error);
+		goto err;
+	}
 
-	} while (0);
+	error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf,
+				  "beacon", ATH_BCBUF, 1);
+	if (error != 0) {
+		DPRINTF(sc, ATH_DBG_FATAL,
+			"Failed to allocate beacon descriptors: %d\n", error);
+		goto err;
+	}
 
+err:
 	if (error != 0)
 		ath_tx_cleanup(sc);
 
 	return error;
 }
 
-int ath_tx_cleanup(struct ath_softc *sc)
+void ath_tx_cleanup(struct ath_softc *sc)
 {
 	if (sc->beacon.bdma.dd_desc_len != 0)
 		ath_descdma_cleanup(sc, &sc->beacon.bdma, &sc->beacon.bbuf);
 
 	if (sc->tx.txdma.dd_desc_len != 0)
 		ath_descdma_cleanup(sc, &sc->tx.txdma, &sc->tx.txbuf);
-
-	return 0;
 }
 
 void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
diff --git a/drivers/net/wireless/ath/main.c b/drivers/net/wireless/ath/main.c
new file mode 100644
index 00000000000..9949b11cb15
--- /dev/null
+++ b/drivers/net/wireless/ath/main.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Shared library for Atheros wireless LAN cards.");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/ath9k/regd.c b/drivers/net/wireless/ath/regd.c
index 4ca62510229..eef370bd121 100644
--- a/drivers/net/wireless/ath9k/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -16,7 +16,9 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include "ath9k.h"
+#include <net/cfg80211.h>
+#include <net/mac80211.h>
+#include "regd.h"
 #include "regd_common.h"
 
 /*
@@ -55,7 +57,7 @@
 
 /* Can be used for:
  * 0x60, 0x61, 0x62 */
-static const struct ieee80211_regdomain ath9k_world_regdom_60_61_62 = {
+static const struct ieee80211_regdomain ath_world_regdom_60_61_62 = {
 	.n_reg_rules = 5,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -65,7 +67,7 @@ static const struct ieee80211_regdomain ath9k_world_regdom_60_61_62 = {
 };
 
 /* Can be used by 0x63 and 0x65 */
-static const struct ieee80211_regdomain ath9k_world_regdom_63_65 = {
+static const struct ieee80211_regdomain ath_world_regdom_63_65 = {
 	.n_reg_rules = 4,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -76,7 +78,7 @@ static const struct ieee80211_regdomain ath9k_world_regdom_63_65 = {
 };
 
 /* Can be used by 0x64 only */
-static const struct ieee80211_regdomain ath9k_world_regdom_64 = {
+static const struct ieee80211_regdomain ath_world_regdom_64 = {
 	.n_reg_rules = 3,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -86,7 +88,7 @@ static const struct ieee80211_regdomain ath9k_world_regdom_64 = {
 };
 
 /* Can be used by 0x66 and 0x69 */
-static const struct ieee80211_regdomain ath9k_world_regdom_66_69 = {
+static const struct ieee80211_regdomain ath_world_regdom_66_69 = {
 	.n_reg_rules = 3,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -96,7 +98,7 @@ static const struct ieee80211_regdomain ath9k_world_regdom_66_69 = {
 };
 
 /* Can be used by 0x67, 0x6A and 0x68 */
-static const struct ieee80211_regdomain ath9k_world_regdom_67_68_6A = {
+static const struct ieee80211_regdomain ath_world_regdom_67_68_6A = {
 	.n_reg_rules = 4,
 	.alpha2 =  "99",
 	.reg_rules = {
@@ -112,49 +114,51 @@ static inline bool is_wwr_sku(u16 regd)
 		(regd == WORLD);
 }
 
-static u16 ath9k_regd_get_eepromRD(struct ath_hw *ah)
+static u16 ath_regd_get_eepromRD(struct ath_regulatory *reg)
 {
-	return ah->regulatory.current_rd & ~WORLDWIDE_ROAMING_FLAG;
+	return reg->current_rd & ~WORLDWIDE_ROAMING_FLAG;
 }
 
-bool ath9k_is_world_regd(struct ath_hw *ah)
+bool ath_is_world_regd(struct ath_regulatory *reg)
 {
-	return is_wwr_sku(ath9k_regd_get_eepromRD(ah));
+	return is_wwr_sku(ath_regd_get_eepromRD(reg));
 }
+EXPORT_SYMBOL(ath_is_world_regd);
 
-const struct ieee80211_regdomain *ath9k_default_world_regdomain(void)
+static const struct ieee80211_regdomain *ath_default_world_regdomain(void)
 {
 	/* this is the most restrictive */
-	return &ath9k_world_regdom_64;
+	return &ath_world_regdom_64;
 }
 
-const struct ieee80211_regdomain *ath9k_world_regdomain(struct ath_hw *ah)
+static const struct
+ieee80211_regdomain *ath_world_regdomain(struct ath_regulatory *reg)
 {
-	switch (ah->regulatory.regpair->regDmnEnum) {
+	switch (reg->regpair->regDmnEnum) {
 	case 0x60:
 	case 0x61:
 	case 0x62:
-		return &ath9k_world_regdom_60_61_62;
+		return &ath_world_regdom_60_61_62;
 	case 0x63:
 	case 0x65:
-		return &ath9k_world_regdom_63_65;
+		return &ath_world_regdom_63_65;
 	case 0x64:
-		return &ath9k_world_regdom_64;
+		return &ath_world_regdom_64;
 	case 0x66:
 	case 0x69:
-		return &ath9k_world_regdom_66_69;
+		return &ath_world_regdom_66_69;
 	case 0x67:
 	case 0x68:
 	case 0x6A:
-		return &ath9k_world_regdom_67_68_6A;
+		return &ath_world_regdom_67_68_6A;
 	default:
 		WARN_ON(1);
-		return ath9k_default_world_regdomain();
+		return ath_default_world_regdomain();
 	}
 }
 
 /* Frequency is one where radar detection is required */
-static bool ath9k_is_radar_freq(u16 center_freq)
+static bool ath_is_radar_freq(u16 center_freq)
 {
 	return (center_freq >= 5260 && center_freq <= 5700);
 }
@@ -168,9 +172,9 @@ static bool ath9k_is_radar_freq(u16 center_freq)
  *   received a beacon on a channel we can enable active scan and
  *   adhoc (or beaconing).
  */
-static void ath9k_reg_apply_beaconing_flags(
-	struct wiphy *wiphy,
-	enum nl80211_reg_initiator initiator)
+static void
+ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
+			      enum nl80211_reg_initiator initiator)
 {
 	enum ieee80211_band band;
 	struct ieee80211_supported_band *sband;
@@ -191,13 +195,15 @@ static void ath9k_reg_apply_beaconing_flags(
 
 			ch = &sband->channels[i];
 
-			if (ath9k_is_radar_freq(ch->center_freq) ||
+			if (ath_is_radar_freq(ch->center_freq) ||
 			    (ch->flags & IEEE80211_CHAN_RADAR))
 				continue;
 
 			if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
-				r = freq_reg_info(wiphy, ch->center_freq,
-					&bandwidth, &reg_rule);
+				r = freq_reg_info(wiphy,
+						  ch->center_freq,
+						  bandwidth,
+						  &reg_rule);
 				if (r)
 					continue;
 				/*
@@ -227,9 +233,9 @@ static void ath9k_reg_apply_beaconing_flags(
 }
 
 /* Allows active scan scan on Ch 12 and 13 */
-static void ath9k_reg_apply_active_scan_flags(
-	struct wiphy *wiphy,
-	enum nl80211_reg_initiator initiator)
+static void
+ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
+				enum nl80211_reg_initiator initiator)
 {
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *ch;
@@ -261,7 +267,7 @@ static void ath9k_reg_apply_active_scan_flags(
 	 */
 
 	ch = &sband->channels[11]; /* CH 12 */
-	r = freq_reg_info(wiphy, ch->center_freq, &bandwidth, &reg_rule);
+	r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
 	if (!r) {
 		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
 			if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -269,7 +275,7 @@ static void ath9k_reg_apply_active_scan_flags(
 	}
 
 	ch = &sband->channels[12]; /* CH 13 */
-	r = freq_reg_info(wiphy, ch->center_freq, &bandwidth, &reg_rule);
+	r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
 	if (!r) {
 		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
 			if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -278,7 +284,7 @@ static void ath9k_reg_apply_active_scan_flags(
 }
 
 /* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */
-void ath9k_reg_apply_radar_flags(struct wiphy *wiphy)
+static void ath_reg_apply_radar_flags(struct wiphy *wiphy)
 {
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *ch;
@@ -291,7 +297,7 @@ void ath9k_reg_apply_radar_flags(struct wiphy *wiphy)
 
 	for (i = 0; i < sband->n_channels; i++) {
 		ch = &sband->channels[i];
-		if (!ath9k_is_radar_freq(ch->center_freq))
+		if (!ath_is_radar_freq(ch->center_freq))
 			continue;
 		/* We always enable radar detection/DFS on this
 		 * frequency range. Additionally we also apply on
@@ -310,37 +316,31 @@ void ath9k_reg_apply_radar_flags(struct wiphy *wiphy)
 	}
 }
 
-void ath9k_reg_apply_world_flags(struct wiphy *wiphy,
-				 enum nl80211_reg_initiator initiator)
+static void ath_reg_apply_world_flags(struct wiphy *wiphy,
+				      enum nl80211_reg_initiator initiator,
+				      struct ath_regulatory *reg)
 {
-	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	struct ath_hw *ah = sc->sc_ah;
-
-	switch (ah->regulatory.regpair->regDmnEnum) {
+	switch (reg->regpair->regDmnEnum) {
 	case 0x60:
 	case 0x63:
 	case 0x66:
 	case 0x67:
-		ath9k_reg_apply_beaconing_flags(wiphy, initiator);
+		ath_reg_apply_beaconing_flags(wiphy, initiator);
 		break;
 	case 0x68:
-		ath9k_reg_apply_beaconing_flags(wiphy, initiator);
-		ath9k_reg_apply_active_scan_flags(wiphy, initiator);
+		ath_reg_apply_beaconing_flags(wiphy, initiator);
+		ath_reg_apply_active_scan_flags(wiphy, initiator);
 		break;
 	}
 	return;
 }
 
-int ath9k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
+int ath_reg_notifier_apply(struct wiphy *wiphy,
+			   struct regulatory_request *request,
+			   struct ath_regulatory *reg)
 {
-	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-
 	/* We always apply this */
-	ath9k_reg_apply_radar_flags(wiphy);
+	ath_reg_apply_radar_flags(wiphy);
 
 	switch (request->initiator) {
 	case NL80211_REGDOM_SET_BY_DRIVER:
@@ -348,39 +348,47 @@ int ath9k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 	case NL80211_REGDOM_SET_BY_USER:
 		break;
 	case NL80211_REGDOM_SET_BY_COUNTRY_IE:
-		if (ath9k_is_world_regd(sc->sc_ah))
-			ath9k_reg_apply_world_flags(wiphy, request->initiator);
+		if (ath_is_world_regd(reg))
+			ath_reg_apply_world_flags(wiphy, request->initiator,
+						  reg);
 		break;
 	}
 
 	return 0;
 }
+EXPORT_SYMBOL(ath_reg_notifier_apply);
 
-bool ath9k_regd_is_eeprom_valid(struct ath_hw *ah)
+static bool ath_regd_is_eeprom_valid(struct ath_regulatory *reg)
 {
-	u16 rd = ath9k_regd_get_eepromRD(ah);
+	 u16 rd = ath_regd_get_eepromRD(reg);
 	int i;
 
 	if (rd & COUNTRY_ERD_FLAG) {
 		/* EEPROM value is a country code */
 		u16 cc = rd & ~COUNTRY_ERD_FLAG;
+		printk(KERN_DEBUG
+		       "ath: EEPROM indicates we should expect "
+			"a country code\n");
 		for (i = 0; i < ARRAY_SIZE(allCountries); i++)
 			if (allCountries[i].countryCode == cc)
 				return true;
 	} else {
 		/* EEPROM value is a regpair value */
+		if (rd != CTRY_DEFAULT)
+			printk(KERN_DEBUG "ath: EEPROM indicates we "
+			       "should expect a direct regpair map\n");
 		for (i = 0; i < ARRAY_SIZE(regDomainPairs); i++)
 			if (regDomainPairs[i].regDmnEnum == rd)
 				return true;
 	}
-	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-		 "invalid regulatory domain/country code 0x%x\n", rd);
+	printk(KERN_DEBUG
+		 "ath: invalid regulatory domain/country code 0x%x\n", rd);
 	return false;
 }
 
 /* EEPROM country code to regpair mapping */
 static struct country_code_to_enum_rd*
-ath9k_regd_find_country(u16 countryCode)
+ath_regd_find_country(u16 countryCode)
 {
 	int i;
 
@@ -393,7 +401,7 @@ ath9k_regd_find_country(u16 countryCode)
 
 /* EEPROM rd code to regpair mapping */
 static struct country_code_to_enum_rd*
-ath9k_regd_find_country_by_rd(int regdmn)
+ath_regd_find_country_by_rd(int regdmn)
 {
 	int i;
 
@@ -405,13 +413,13 @@ ath9k_regd_find_country_by_rd(int regdmn)
 }
 
 /* Returns the map of the EEPROM set RD to a country code */
-static u16 ath9k_regd_get_default_country(u16 rd)
+static u16 ath_regd_get_default_country(u16 rd)
 {
 	if (rd & COUNTRY_ERD_FLAG) {
 		struct country_code_to_enum_rd *country = NULL;
 		u16 cc = rd & ~COUNTRY_ERD_FLAG;
 
-		country = ath9k_regd_find_country(cc);
+		country = ath_regd_find_country(cc);
 		if (country != NULL)
 			return cc;
 	}
@@ -420,7 +428,7 @@ static u16 ath9k_regd_get_default_country(u16 rd)
 }
 
 static struct reg_dmn_pair_mapping*
-ath9k_get_regpair(int regdmn)
+ath_get_regpair(int regdmn)
 {
 	int i;
 
@@ -433,87 +441,135 @@ ath9k_get_regpair(int regdmn)
 	return NULL;
 }
 
-int ath9k_regd_init(struct ath_hw *ah)
+static int
+ath_regd_init_wiphy(struct ath_regulatory *reg,
+		    struct wiphy *wiphy,
+		    int (*reg_notifier)(struct wiphy *wiphy,
+					struct regulatory_request *request))
+{
+	const struct ieee80211_regdomain *regd;
+
+	wiphy->reg_notifier = reg_notifier;
+	wiphy->strict_regulatory = true;
+
+	if (ath_is_world_regd(reg)) {
+		/*
+		 * Anything applied here (prior to wiphy registration) gets
+		 * saved on the wiphy orig_* parameters
+		 */
+		regd = ath_world_regdomain(reg);
+		wiphy->custom_regulatory = true;
+		wiphy->strict_regulatory = false;
+	} else {
+		/*
+		 * This gets applied in the case of the absense of CRDA,
+		 * it's our own custom world regulatory domain, similar to
+		 * cfg80211's but we enable passive scanning.
+		 */
+		regd = ath_default_world_regdomain();
+	}
+	wiphy_apply_custom_regulatory(wiphy, regd);
+	ath_reg_apply_radar_flags(wiphy);
+	ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
+	return 0;
+}
+
+int
+ath_regd_init(struct ath_regulatory *reg,
+	      struct wiphy *wiphy,
+	      int (*reg_notifier)(struct wiphy *wiphy,
+				  struct regulatory_request *request))
 {
 	struct country_code_to_enum_rd *country = NULL;
 	u16 regdmn;
 
-	if (!ath9k_regd_is_eeprom_valid(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-			"Invalid EEPROM contents\n");
+	if (!reg)
+		return -EINVAL;
+
+	printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
+
+	if (!ath_regd_is_eeprom_valid(reg)) {
+		printk(KERN_ERR "ath: Invalid EEPROM contents\n");
 		return -EINVAL;
 	}
 
-	regdmn = ath9k_regd_get_eepromRD(ah);
-	ah->regulatory.country_code = ath9k_regd_get_default_country(regdmn);
+	regdmn = ath_regd_get_eepromRD(reg);
+	reg->country_code = ath_regd_get_default_country(regdmn);
 
-	if (ah->regulatory.country_code == CTRY_DEFAULT &&
-	    regdmn == CTRY_DEFAULT)
-		ah->regulatory.country_code = CTRY_UNITED_STATES;
+	if (reg->country_code == CTRY_DEFAULT &&
+	    regdmn == CTRY_DEFAULT) {
+		printk(KERN_DEBUG "ath: EEPROM indicates default "
+		       "country code should be used\n");
+		reg->country_code = CTRY_UNITED_STATES;
+	}
 
-	if (ah->regulatory.country_code == CTRY_DEFAULT) {
+	if (reg->country_code == CTRY_DEFAULT) {
 		country = NULL;
 	} else {
-		country = ath9k_regd_find_country(ah->regulatory.country_code);
+		printk(KERN_DEBUG "ath: doing EEPROM country->regdmn "
+		       "map search\n");
+		country = ath_regd_find_country(reg->country_code);
 		if (country == NULL) {
-			DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-				"Country is NULL!!!!, cc= %d\n",
-				ah->regulatory.country_code);
+			printk(KERN_DEBUG
+				"ath: no valid country maps found for "
+				"country code: 0x%0x\n",
+				reg->country_code);
 			return -EINVAL;
-		} else
+		} else {
 			regdmn = country->regDmnEnum;
+			printk(KERN_DEBUG "ath: country maps to "
+			       "regdmn code: 0x%0x\n",
+			       regdmn);
+		}
 	}
 
-	ah->regulatory.regpair = ath9k_get_regpair(regdmn);
+	reg->regpair = ath_get_regpair(regdmn);
 
-	if (!ah->regulatory.regpair) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+	if (!reg->regpair) {
+		printk(KERN_DEBUG "ath: "
 			"No regulatory domain pair found, cannot continue\n");
 		return -EINVAL;
 	}
 
 	if (!country)
-		country = ath9k_regd_find_country_by_rd(regdmn);
+		country = ath_regd_find_country_by_rd(regdmn);
 
 	if (country) {
-		ah->regulatory.alpha2[0] = country->isoName[0];
-		ah->regulatory.alpha2[1] = country->isoName[1];
+		reg->alpha2[0] = country->isoName[0];
+		reg->alpha2[1] = country->isoName[1];
 	} else {
-		ah->regulatory.alpha2[0] = '0';
-		ah->regulatory.alpha2[1] = '0';
+		reg->alpha2[0] = '0';
+		reg->alpha2[1] = '0';
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-		"Country alpha2 being used: %c%c\n"
-		"Regulatory.Regpair detected: 0x%0x\n",
-		ah->regulatory.alpha2[0], ah->regulatory.alpha2[1],
-		ah->regulatory.regpair->regDmnEnum);
+	printk(KERN_DEBUG "ath: Country alpha2 being used: %c%c\n",
+		reg->alpha2[0], reg->alpha2[1]);
+	printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n",
+		reg->regpair->regDmnEnum);
 
+	ath_regd_init_wiphy(reg, wiphy, reg_notifier);
 	return 0;
 }
+EXPORT_SYMBOL(ath_regd_init);
 
-u32 ath9k_regd_get_ctl(struct ath_hw *ah, struct ath9k_channel *chan)
+u32 ath_regd_get_band_ctl(struct ath_regulatory *reg,
+			  enum ieee80211_band band)
 {
-	u32 ctl = NO_CTL;
-
-	if (!ah->regulatory.regpair ||
-	    (ah->regulatory.country_code == CTRY_DEFAULT &&
-	     is_wwr_sku(ath9k_regd_get_eepromRD(ah)))) {
-		if (IS_CHAN_B(chan))
-			ctl = SD_NO_CTL | CTL_11B;
-		else if (IS_CHAN_G(chan))
-			ctl = SD_NO_CTL | CTL_11G;
-		else
-			ctl = SD_NO_CTL | CTL_11A;
-		return ctl;
+	if (!reg->regpair ||
+	    (reg->country_code == CTRY_DEFAULT &&
+	     is_wwr_sku(ath_regd_get_eepromRD(reg)))) {
+		return SD_NO_CTL;
 	}
 
-	if (IS_CHAN_B(chan))
-		ctl = ah->regulatory.regpair->reg_2ghz_ctl | CTL_11B;
-	else if (IS_CHAN_G(chan))
-		ctl = ah->regulatory.regpair->reg_2ghz_ctl | CTL_11G;
-	else
-		ctl = ah->regulatory.regpair->reg_5ghz_ctl | CTL_11A;
+	switch (band) {
+	case IEEE80211_BAND_2GHZ:
+		return reg->regpair->reg_2ghz_ctl;
+	case IEEE80211_BAND_5GHZ:
+		return reg->regpair->reg_5ghz_ctl;
+	default:
+		return NO_CTL;
+	}
 
-	return ctl;
+	return NO_CTL;
 }
+EXPORT_SYMBOL(ath_regd_get_band_ctl);
diff --git a/drivers/net/wireless/ath9k/regd.h b/drivers/net/wireless/ath/regd.h
index 9f5fbd4eea7..07291ccb23f 100644
--- a/drivers/net/wireless/ath9k/regd.h
+++ b/drivers/net/wireless/ath/regd.h
@@ -17,6 +17,25 @@
 #ifndef REGD_H
 #define REGD_H
 
+#include <linux/nl80211.h>
+
+#include <net/cfg80211.h>
+
+#define NO_CTL 0xff
+#define SD_NO_CTL               0xE0
+#define NO_CTL                  0xff
+#define CTL_MODE_M              7
+#define CTL_11A                 0
+#define CTL_11B                 1
+#define CTL_11G                 2
+#define CTL_2GHT20              5
+#define CTL_5GHT20              6
+#define CTL_2GHT40              7
+#define CTL_5GHT40              8
+
+#define CTRY_DEBUG 0x1ff
+#define CTRY_DEFAULT 0
+
 #define COUNTRY_ERD_FLAG        0x8000
 #define WORLDWIDE_ROAMING_FLAG  0x4000
 
@@ -40,7 +59,7 @@ struct country_code_to_enum_rd {
 	const char *isoName;
 };
 
-struct ath9k_regulatory {
+struct ath_regulatory {
 	char alpha2[2];
 	u16 country_code;
 	u16 max_power_level;
@@ -233,15 +252,14 @@ enum CountryCode {
 	CTRY_BELGIUM2 = 5002
 };
 
-bool ath9k_is_world_regd(struct ath_hw *ah);
-const struct ieee80211_regdomain *ath9k_world_regdomain(struct ath_hw *ah);
-const struct ieee80211_regdomain *ath9k_default_world_regdomain(void);
-void ath9k_reg_apply_world_flags(struct wiphy *wiphy,
-				 enum nl80211_reg_initiator initiator);
-void ath9k_reg_apply_radar_flags(struct wiphy *wiphy);
-int ath9k_regd_init(struct ath_hw *ah);
-bool ath9k_regd_is_eeprom_valid(struct ath_hw *ah);
-u32 ath9k_regd_get_ctl(struct ath_hw *ah, struct ath9k_channel *chan);
-int ath9k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request);
+bool ath_is_world_regd(struct ath_regulatory *reg);
+int ath_regd_init(struct ath_regulatory *reg, struct wiphy *wiphy,
+		  int (*reg_notifier)(struct wiphy *wiphy,
+		  struct regulatory_request *request));
+u32 ath_regd_get_band_ctl(struct ath_regulatory *reg,
+			  enum ieee80211_band band);
+int ath_reg_notifier_apply(struct wiphy *wiphy,
+			   struct regulatory_request *request,
+			   struct ath_regulatory *reg);
 
 #endif
diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index 4d0e298cd1c..4d0e298cd1c 100644
--- a/drivers/net/wireless/ath9k/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 27eef8fb710..291a94bd46f 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -818,7 +818,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irqrestore(&priv->irqlock, flags);
 		spin_unlock_bh(&priv->timerlock);
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	frame_ctl = IEEE80211_FTYPE_DATA;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 77406245dc7..ddaa859c349 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -279,7 +279,7 @@ static int atmel_config(struct pcmcia_device *link)
 	struct pcmcia_device_id *did;
 
 	dev = link->priv;
-	did = handle_to_dev(link).driver_data;
+	did = dev_get_drvdata(&handle_to_dev(link));
 
 	DEBUG(0, "atmel_config(0x%p)\n", link);
 
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index aab71a70ba7..67f564e3722 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -3,7 +3,6 @@ config B43
 	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
-	select HW_RANDOM
 	---help---
 	  b43 is a driver for the Broadcom 43xx series wireless devices.
 
@@ -99,11 +98,11 @@ config B43_LEDS
 	depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43)
 	default y
 
-# This config option automatically enables b43 RFKILL support,
-# if it's possible.
-config B43_RFKILL
+# This config option automatically enables b43 HW-RNG support,
+# if the HW-RNG core is enabled.
+config B43_HWRNG
 	bool
-	depends on B43 && (RFKILL = y || RFKILL = B43) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43)
+	depends on B43 && (HW_RANDOM = y || HW_RANDOM = B43)
 	default y
 
 config B43_DEBUG
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 281ef831035..da379f4b0c3 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -13,7 +13,7 @@ b43-y				+= lo.o
 b43-y				+= wa.o
 b43-y				+= dma.o
 b43-$(CONFIG_B43_PIO)		+= pio.o
-b43-$(CONFIG_B43_RFKILL)	+= rfkill.o
+b43-y				+= rfkill.o
 b43-$(CONFIG_B43_LEDS)		+= leds.o
 b43-$(CONFIG_B43_PCMCIA)	+= pcmcia.o
 b43-$(CONFIG_B43_DEBUG)		+= debugfs.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index beaf18d6e8a..f580c2812d9 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -163,6 +163,7 @@ enum {
 #define B43_SHM_SH_WLCOREREV		0x0016	/* 802.11 core revision */
 #define B43_SHM_SH_PCTLWDPOS		0x0008
 #define B43_SHM_SH_RXPADOFF		0x0034	/* RX Padding data offset (PIO only) */
+#define B43_SHM_SH_FWCAPA		0x0042	/* Firmware capabilities (Opensource firmware only) */
 #define B43_SHM_SH_PHYVER		0x0050	/* PHY version */
 #define B43_SHM_SH_PHYTYPE		0x0052	/* PHY type */
 #define B43_SHM_SH_ANTSWAP		0x005C	/* Antenna swap threshold */
@@ -297,6 +298,10 @@ enum {
 #define B43_HF_MLADVW		0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */
 #define B43_HF_PR45960W		0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */
 
+/* Firmware capabilities field in SHM (Opensource firmware only) */
+#define B43_FWCAPA_HWCRYPTO	0x0001
+#define B43_FWCAPA_QOS		0x0002
+
 /* MacFilter offsets. */
 #define B43_MACFILTER_SELF		0x0000
 #define B43_MACFILTER_BSSID		0x0003
@@ -596,6 +601,13 @@ struct b43_wl {
 	/* Pointer to the ieee80211 hardware data structure */
 	struct ieee80211_hw *hw;
 
+	/* The number of queues that were registered with the mac80211 subsystem
+	 * initially. This is a backup copy of hw->queues in case hw->queues has
+	 * to be dynamically lowered at runtime (Firmware does not support QoS).
+	 * hw->queues has to be restored to the original value before unregistering
+	 * from the mac80211 subsystem. */
+	u16 mac80211_initially_registered_queues;
+
 	struct mutex mutex;
 	spinlock_t irq_lock;
 	/* R/W lock for data transmission.
@@ -625,12 +637,11 @@ struct b43_wl {
 	/* Stats about the wireless interface */
 	struct ieee80211_low_level_stats ieee_stats;
 
+#ifdef CONFIG_B43_HWRNG
 	struct hwrng rng;
-	u8 rng_initialized;
+	bool rng_initialized;
 	char rng_name[30 + 1];
-
-	/* The RF-kill button */
-	struct b43_rfkill rfkill;
+#endif /* CONFIG_B43_HWRNG */
 
 	/* List of all wireless devices on this chip */
 	struct list_head devlist;
@@ -750,6 +761,8 @@ struct b43_wldev {
 	bool dfq_valid;		/* Directed frame queue valid (IBSS PS mode, ATIM) */
 	bool radio_hw_enable;	/* saved state of radio hardware enabled state */
 	bool suspend_in_progress;	/* TRUE, if we are in a suspend/resume cycle */
+	bool qos_enabled;		/* TRUE, if QoS is used. */
+	bool hwcrypto_enabled;		/* TRUE, if HW crypto acceleration is enabled. */
 
 	/* PHY/Radio device. */
 	struct b43_phy phy;
@@ -776,8 +789,8 @@ struct b43_wldev {
 	/* Reason code of the last interrupt. */
 	u32 irq_reason;
 	u32 dma_reason[6];
-	/* saved irq enable/disable state bitfield. */
-	u32 irq_savedstate;
+	/* The currently active generic-interrupt mask. */
+	u32 irq_mask;
 	/* Link Quality calculation context. */
 	struct b43_noise_calculation noisecalc;
 	/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index eae680b5305..7964cc32b25 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1285,7 +1285,7 @@ static struct b43_dmaring *select_ring_by_priority(struct b43_wldev *dev,
 {
 	struct b43_dmaring *ring;
 
-	if (b43_modparam_qos) {
+	if (dev->qos_enabled) {
 		/* 0 = highest priority */
 		switch (queue_prio) {
 		default:
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 76f4c7bad8b..c8b317094c3 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -28,6 +28,7 @@
 
 #include "b43.h"
 #include "leds.h"
+#include "rfkill.h"
 
 
 static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index,
@@ -87,7 +88,7 @@ static void b43_led_brightness_set(struct led_classdev *led_dev,
 }
 
 static int b43_register_led(struct b43_wldev *dev, struct b43_led *led,
-			    const char *name, char *default_trigger,
+			    const char *name, const char *default_trigger,
 			    u8 led_index, bool activelow)
 {
 	int err;
@@ -164,10 +165,10 @@ static void b43_map_led(struct b43_wldev *dev,
 		snprintf(name, sizeof(name),
 			 "b43-%s::radio", wiphy_name(hw->wiphy));
 		b43_register_led(dev, &dev->led_radio, name,
-				 b43_rfkill_led_name(dev),
+				 ieee80211_get_radio_led_name(hw),
 				 led_index, activelow);
-		/* Sync the RF-kill LED state with the switch state. */
-		if (dev->radio_hw_enable)
+		/* Sync the RF-kill LED state with radio and switch states. */
+		if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev))
 			b43_led_turn_on(dev, led_index, activelow);
 		break;
 	case B43_LED_WEIRD:
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 79b685e300c..6456afebdba 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -80,8 +80,8 @@ static int modparam_nohwcrypt;
 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
-int b43_modparam_qos = 1;
-module_param_named(qos, b43_modparam_qos, int, 0444);
+static int modparam_qos = 1;
+module_param_named(qos, modparam_qos, int, 0444);
 MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
 
 static int modparam_btcoex = 1;
@@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev, u64 value)
 	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
 }
 
+/* Read the firmware capabilities bitmask (Opensource firmware only) */
+static u16 b43_fwcapa_read(struct b43_wldev *dev)
+{
+	B43_WARN_ON(!dev->fw.opensource);
+	return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
+}
+
 void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
 {
 	u32 low, high;
@@ -673,32 +680,6 @@ static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 	b43_set_slot_time(dev, 20);
 }
 
-/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
- * Returns the _previously_ enabled IRQ mask.
- */
-static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask)
-{
-	u32 old_mask;
-
-	old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
-	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask);
-
-	return old_mask;
-}
-
-/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
- * Returns the _previously_ enabled IRQ mask.
- */
-static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask)
-{
-	u32 old_mask;
-
-	old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
-	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
-
-	return old_mask;
-}
-
 /* Synchronize IRQ top- and bottom-half.
  * IRQs must be masked before calling this.
  * This must not be called with the irq_lock held.
@@ -1593,7 +1574,7 @@ static void handle_irq_beacon(struct b43_wldev *dev)
 	/* This is the bottom half of the asynchronous beacon update. */
 
 	/* Ignore interrupt in the future. */
-	dev->irq_savedstate &= ~B43_IRQ_BEACON;
+	dev->irq_mask &= ~B43_IRQ_BEACON;
 
 	cmd = b43_read32(dev, B43_MMIO_MACCMD);
 	beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
@@ -1602,7 +1583,7 @@ static void handle_irq_beacon(struct b43_wldev *dev)
 	/* Schedule interrupt manually, if busy. */
 	if (beacon0_valid && beacon1_valid) {
 		b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
-		dev->irq_savedstate |= B43_IRQ_BEACON;
+		dev->irq_mask |= B43_IRQ_BEACON;
 		return;
 	}
 
@@ -1641,11 +1622,9 @@ static void b43_beacon_update_trigger_work(struct work_struct *work)
 	if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
 		spin_lock_irq(&wl->irq_lock);
 		/* update beacon right away or defer to irq */
-		dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
 		handle_irq_beacon(dev);
 		/* The handler might have updated the IRQ mask. */
-		b43_write32(dev, B43_MMIO_GEN_IRQ_MASK,
-			    dev->irq_savedstate);
+		b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 		mmiowb();
 		spin_unlock_irq(&wl->irq_lock);
 	}
@@ -1879,7 +1858,7 @@ static void b43_interrupt_tasklet(struct b43_wldev *dev)
 	if (reason & B43_IRQ_TX_OK)
 		handle_irq_transmit_status(dev);
 
-	b43_interrupt_enable(dev, dev->irq_savedstate);
+	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 	mmiowb();
 	spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
 }
@@ -1893,7 +1872,9 @@ static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
 	b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
 	b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
 	b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
+/* Unused ring
 	b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
+*/
 }
 
 /* Interrupt handler top-half */
@@ -1903,18 +1884,19 @@ static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
 	struct b43_wldev *dev = dev_id;
 	u32 reason;
 
-	if (!dev)
-		return IRQ_NONE;
+	B43_WARN_ON(!dev);
 
 	spin_lock(&dev->wl->irq_lock);
 
-	if (b43_status(dev) < B43_STAT_STARTED)
+	if (unlikely(b43_status(dev) < B43_STAT_STARTED)) {
+		/* This can only happen on shared IRQ lines. */
 		goto out;
+	}
 	reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
 	if (reason == 0xffffffff)	/* shared IRQ */
 		goto out;
 	ret = IRQ_HANDLED;
-	reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
+	reason &= dev->irq_mask;
 	if (!reason)
 		goto out;
 
@@ -1928,16 +1910,18 @@ static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
 	    & 0x0001DC00;
 	dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
 	    & 0x0000DC00;
+/* Unused ring
 	dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
 	    & 0x0000DC00;
+*/
 
 	b43_interrupt_ack(dev, reason);
 	/* disable all IRQs. They are enabled again in the bottom half. */
-	dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
+	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
 	/* save the reason code and call our bottom half. */
 	dev->irq_reason = reason;
 	tasklet_schedule(&dev->isr_tasklet);
-      out:
+out:
 	mmiowb();
 	spin_unlock(&dev->wl->irq_lock);
 
@@ -2330,12 +2314,34 @@ static int b43_upload_microcode(struct b43_wldev *dev)
 	dev->fw.patch = fwpatch;
 	dev->fw.opensource = (fwdate == 0xFFFF);
 
+	/* Default to use-all-queues. */
+	dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
+	dev->qos_enabled = !!modparam_qos;
+	/* Default to firmware/hardware crypto acceleration. */
+	dev->hwcrypto_enabled = 1;
+
 	if (dev->fw.opensource) {
+		u16 fwcapa;
+
 		/* Patchlevel info is encoded in the "time" field. */
 		dev->fw.patch = fwtime;
-		b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n",
-			dev->fw.rev, dev->fw.patch,
-			dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : "");
+		b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
+			dev->fw.rev, dev->fw.patch);
+
+		fwcapa = b43_fwcapa_read(dev);
+		if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) {
+			b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n");
+			/* Disable hardware crypto and fall back to software crypto. */
+			dev->hwcrypto_enabled = 0;
+		}
+		if (!(fwcapa & B43_FWCAPA_QOS)) {
+			b43info(dev->wl, "QoS not supported by firmware\n");
+			/* Disable QoS. Tweak hw->queues to 1. It will be restored before
+			 * ieee80211_unregister to make sure the networking core can
+			 * properly free possible resources. */
+			dev->wl->hw->queues = 1;
+			dev->qos_enabled = 0;
+		}
 	} else {
 		b43info(dev->wl, "Loading firmware version %u.%u "
 			"(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
@@ -2980,6 +2986,7 @@ static void b43_security_init(struct b43_wldev *dev)
 	b43_clear_keys(dev);
 }
 
+#ifdef CONFIG_B43_HWRNG
 static int b43_rng_read(struct hwrng *rng, u32 *data)
 {
 	struct b43_wl *wl = (struct b43_wl *)rng->priv;
@@ -2995,17 +3002,21 @@ static int b43_rng_read(struct hwrng *rng, u32 *data)
 
 	return (sizeof(u16));
 }
+#endif /* CONFIG_B43_HWRNG */
 
 static void b43_rng_exit(struct b43_wl *wl)
 {
+#ifdef CONFIG_B43_HWRNG
 	if (wl->rng_initialized)
 		hwrng_unregister(&wl->rng);
+#endif /* CONFIG_B43_HWRNG */
 }
 
 static int b43_rng_init(struct b43_wl *wl)
 {
-	int err;
+	int err = 0;
 
+#ifdef CONFIG_B43_HWRNG
 	snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
 		 "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
 	wl->rng.name = wl->rng_name;
@@ -3018,6 +3029,7 @@ static int b43_rng_init(struct b43_wl *wl)
 		b43err(wl, "Failed to register the random "
 		       "number generator (%d)\n", err);
 	}
+#endif /* CONFIG_B43_HWRNG */
 
 	return err;
 }
@@ -3485,14 +3497,9 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 	if (phy->ops->set_rx_antenna)
 		phy->ops->set_rx_antenna(dev, antenna);
 
-	/* Update templates for AP/mesh mode. */
-	if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
-	    b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
-		b43_set_beacon_int(dev, conf->beacon_int);
-
 	if (!!conf->radio_enabled != phy->radio_on) {
 		if (conf->radio_enabled) {
-			b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
+			b43_software_rfkill(dev, false);
 			b43info(dev->wl, "Radio turned on by software\n");
 			if (!dev->radio_hw_enable) {
 				b43info(dev->wl, "The hardware RF-kill button "
@@ -3500,7 +3507,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
 					"Press the button to turn it on.\n");
 			}
 		} else {
-			b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+			b43_software_rfkill(dev, true);
 			b43info(dev->wl, "Radio turned off by software\n");
 		}
 	}
@@ -3565,14 +3572,45 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev;
+	unsigned long flags;
 
 	mutex_lock(&wl->mutex);
 
 	dev = wl->current_dev;
 	if (!dev || b43_status(dev) < B43_STAT_STARTED)
 		goto out_unlock_mutex;
+
+	B43_WARN_ON(wl->vif != vif);
+
+	spin_lock_irqsave(&wl->irq_lock, flags);
+	if (changed & BSS_CHANGED_BSSID) {
+		if (conf->bssid)
+			memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+		else
+			memset(wl->bssid, 0, ETH_ALEN);
+	}
+
+	if (b43_status(dev) >= B43_STAT_INITIALIZED) {
+		if (changed & BSS_CHANGED_BEACON &&
+		    (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+		     b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
+		     b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+			b43_update_templates(wl);
+
+		if (changed & BSS_CHANGED_BSSID)
+			b43_write_mac_bssid_templates(dev);
+	}
+	spin_unlock_irqrestore(&wl->irq_lock, flags);
+
 	b43_mac_suspend(dev);
 
+	/* Update templates for AP/mesh mode. */
+	if (changed & BSS_CHANGED_BEACON_INT &&
+	    (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+	     b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
+	     b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+		b43_set_beacon_int(dev, conf->beacon_int);
+
 	if (changed & BSS_CHANGED_BASIC_RATES)
 		b43_update_basic_rates(dev, conf->basic_rates);
 
@@ -3586,8 +3624,6 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 	b43_mac_enable(dev);
 out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
-
-	return;
 }
 
 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -3620,7 +3656,7 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
 		goto out_unlock;
 
-	if (dev->fw.pcm_request_failed) {
+	if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
 		/* We don't have firmware for the crypto engine.
 		 * Must use software-crypto. */
 		err = -EOPNOTSUPP;
@@ -3630,7 +3666,7 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	err = -EINVAL;
 	switch (key->alg) {
 	case ALG_WEP:
-		if (key->keylen == LEN_WEP40)
+		if (key->keylen == WLAN_KEY_LEN_WEP40)
 			algorithm = B43_SEC_ALGO_WEP40;
 		else
 			algorithm = B43_SEC_ALGO_WEP104;
@@ -3745,41 +3781,6 @@ static void b43_op_configure_filter(struct ieee80211_hw *hw,
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 }
 
-static int b43_op_config_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_vif *vif,
-				   struct ieee80211_if_conf *conf)
-{
-	struct b43_wl *wl = hw_to_b43_wl(hw);
-	struct b43_wldev *dev = wl->current_dev;
-	unsigned long flags;
-
-	if (!dev)
-		return -ENODEV;
-	mutex_lock(&wl->mutex);
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	B43_WARN_ON(wl->vif != vif);
-	if (conf->bssid)
-		memcpy(wl->bssid, conf->bssid, ETH_ALEN);
-	else
-		memset(wl->bssid, 0, ETH_ALEN);
-	if (b43_status(dev) >= B43_STAT_INITIALIZED) {
-		if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
-		    b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) {
-			B43_WARN_ON(vif->type != wl->if_type);
-			if (conf->changed & IEEE80211_IFCC_BEACON)
-				b43_update_templates(wl);
-		} else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
-			if (conf->changed & IEEE80211_IFCC_BEACON)
-				b43_update_templates(wl);
-		}
-		b43_write_mac_bssid_templates(dev);
-	}
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	mutex_unlock(&wl->mutex);
-
-	return 0;
-}
-
 /* Locking: wl->mutex */
 static void b43_wireless_core_stop(struct b43_wldev *dev)
 {
@@ -3793,7 +3794,7 @@ static void b43_wireless_core_stop(struct b43_wldev *dev)
 	 * setting the status to INITIALIZED, as the interrupt handler
 	 * won't care about IRQs then. */
 	spin_lock_irqsave(&wl->irq_lock, flags);
-	dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
+	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
 	b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);	/* flush */
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 	b43_synchronize_irq(dev);
@@ -3834,7 +3835,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
 
 	/* Start data flow (TX/RX). */
 	b43_mac_enable(dev);
-	b43_interrupt_enable(dev, dev->irq_savedstate);
+	b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 
 	/* Start maintainance work */
 	b43_periodic_tasks_setup(dev);
@@ -3997,9 +3998,9 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev)
 	/* IRQ related flags */
 	dev->irq_reason = 0;
 	memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
-	dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
+	dev->irq_mask = B43_IRQ_MASKTEMPLATE;
 	if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
-		dev->irq_savedstate &= ~B43_IRQ_PHY_TXERR;
+		dev->irq_mask &= ~B43_IRQ_PHY_TXERR;
 
 	dev->mac_suspended = 1;
 
@@ -4326,7 +4327,6 @@ static int b43_op_start(struct ieee80211_hw *hw)
 	struct b43_wldev *dev = wl->current_dev;
 	int did_init = 0;
 	int err = 0;
-	bool do_rfkill_exit = 0;
 
 	/* Kill all old instance specific information to make sure
 	 * the card won't use it in the short timeframe between start
@@ -4340,18 +4340,12 @@ static int b43_op_start(struct ieee80211_hw *hw)
 	wl->beacon1_uploaded = 0;
 	wl->beacon_templates_virgin = 1;
 
-	/* First register RFkill.
-	 * LEDs that are registered later depend on it. */
-	b43_rfkill_init(dev);
-
 	mutex_lock(&wl->mutex);
 
 	if (b43_status(dev) < B43_STAT_INITIALIZED) {
 		err = b43_wireless_core_init(dev);
-		if (err) {
-			do_rfkill_exit = 1;
+		if (err)
 			goto out_mutex_unlock;
-		}
 		did_init = 1;
 	}
 
@@ -4360,17 +4354,16 @@ static int b43_op_start(struct ieee80211_hw *hw)
 		if (err) {
 			if (did_init)
 				b43_wireless_core_exit(dev);
-			do_rfkill_exit = 1;
 			goto out_mutex_unlock;
 		}
 	}
 
+	/* XXX: only do if device doesn't support rfkill irq */
+	wiphy_rfkill_start_polling(hw->wiphy);
+
  out_mutex_unlock:
 	mutex_unlock(&wl->mutex);
 
-	if (do_rfkill_exit)
-		b43_rfkill_exit(dev);
-
 	return err;
 }
 
@@ -4379,7 +4372,6 @@ static void b43_op_stop(struct ieee80211_hw *hw)
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 	struct b43_wldev *dev = wl->current_dev;
 
-	b43_rfkill_exit(dev);
 	cancel_work_sync(&(wl->beacon_update_trigger));
 
 	mutex_lock(&wl->mutex);
@@ -4449,7 +4441,6 @@ static const struct ieee80211_ops b43_hw_ops = {
 	.remove_interface	= b43_op_remove_interface,
 	.config			= b43_op_config,
 	.bss_info_changed	= b43_op_bss_info_changed,
-	.config_interface	= b43_op_config_interface,
 	.configure_filter	= b43_op_configure_filter,
 	.set_key		= b43_op_set_key,
 	.get_stats		= b43_op_get_stats,
@@ -4462,6 +4453,7 @@ static const struct ieee80211_ops b43_hw_ops = {
 	.sta_notify		= b43_op_sta_notify,
 	.sw_scan_start		= b43_op_sw_scan_start_notifier,
 	.sw_scan_complete	= b43_op_sw_scan_complete_notifier,
+	.rfkill_poll		= b43_rfkill_poll,
 };
 
 /* Hard-reset the chip. Do not call this directly.
@@ -4764,6 +4756,7 @@ static int b43_wireless_init(struct ssb_device *dev)
 		b43err(NULL, "Could not allocate ieee80211 device\n");
 		goto out;
 	}
+	wl = hw_to_b43_wl(hw);
 
 	/* fill hw info */
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
@@ -4777,7 +4770,8 @@ static int b43_wireless_init(struct ssb_device *dev)
 		BIT(NL80211_IFTYPE_WDS) |
 		BIT(NL80211_IFTYPE_ADHOC);
 
-	hw->queues = b43_modparam_qos ? 4 : 1;
+	hw->queues = modparam_qos ? 4 : 1;
+	wl->mac80211_initially_registered_queues = hw->queues;
 	hw->max_rates = 2;
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))
@@ -4785,9 +4779,7 @@ static int b43_wireless_init(struct ssb_device *dev)
 	else
 		SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
 
-	/* Get and initialize struct b43_wl */
-	wl = hw_to_b43_wl(hw);
-	memset(wl, 0, sizeof(*wl));
+	/* Initialize struct b43_wl */
 	wl->hw = hw;
 	spin_lock_init(&wl->irq_lock);
 	rwlock_init(&wl->tx_lock);
@@ -4853,8 +4845,13 @@ static void b43_remove(struct ssb_device *dev)
 	cancel_work_sync(&wldev->restart_work);
 
 	B43_WARN_ON(!wl);
-	if (wl->current_dev == wldev)
+	if (wl->current_dev == wldev) {
+		/* Restore the queues count before unregistering, because firmware detect
+		 * might have modified it. Restoring is important, so the networking
+		 * stack can properly free resources. */
+		wl->hw->queues = wl->mac80211_initially_registered_queues;
 		ieee80211_unregister_hw(wl->hw);
+	}
 
 	b43_one_core_detach(dev);
 
@@ -4949,7 +4946,7 @@ static struct ssb_driver b43_ssb_driver = {
 static void b43_print_driverinfo(void)
 {
 	const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
-		   *feat_leds = "", *feat_rfkill = "";
+		   *feat_leds = "";
 
 #ifdef CONFIG_B43_PCI_AUTOSELECT
 	feat_pci = "P";
@@ -4963,14 +4960,11 @@ static void b43_print_driverinfo(void)
 #ifdef CONFIG_B43_LEDS
 	feat_leds = "L";
 #endif
-#ifdef CONFIG_B43_RFKILL
-	feat_rfkill = "R";
-#endif
 	printk(KERN_INFO "Broadcom 43xx driver loaded "
-	       "[ Features: %s%s%s%s%s, Firmware-ID: "
+	       "[ Features: %s%s%s%s, Firmware-ID: "
 	       B43_SUPPORTED_FIRMWARE_ID " ]\n",
 	       feat_pci, feat_pcmcia, feat_nphy,
-	       feat_leds, feat_rfkill);
+	       feat_leds);
 }
 
 static int __init b43_init(void)
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index 40abcf5d1b4..950fb1b0546 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -39,7 +39,6 @@
 #define PAD_BYTES(nr_bytes)		P4D_BYTES( __LINE__ , (nr_bytes))
 
 
-extern int b43_modparam_qos;
 extern int b43_modparam_verbose;
 
 /* Logmessage verbosity levels. Update the b43_modparam_verbose helptext, if
diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
index c836c077d51..816e028a262 100644
--- a/drivers/net/wireless/b43/phy_a.c
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -480,11 +480,11 @@ static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev)
 }
 
 static void b43_aphy_op_software_rfkill(struct b43_wldev *dev,
-					enum rfkill_state state)
+					bool blocked)
 {
 	struct b43_phy *phy = &dev->phy;
 
-	if (state == RFKILL_STATE_UNBLOCKED) {
+	if (!blocked) {
 		if (phy->radio_on)
 			return;
 		b43_radio_write16(dev, 0x0004, 0x00C0);
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index e176b6e0d9c..6d241622210 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -84,7 +84,7 @@ int b43_phy_init(struct b43_wldev *dev)
 
 	phy->channel = ops->get_default_chan(dev);
 
-	ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
+	ops->software_rfkill(dev, false);
 	err = ops->init(dev);
 	if (err) {
 		b43err(dev->wl, "PHY init failed\n");
@@ -104,7 +104,7 @@ err_phy_exit:
 	if (ops->exit)
 		ops->exit(dev);
 err_block_rf:
-	ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+	ops->software_rfkill(dev, true);
 
 	return err;
 }
@@ -113,7 +113,7 @@ void b43_phy_exit(struct b43_wldev *dev)
 {
 	const struct b43_phy_operations *ops = dev->phy.ops;
 
-	ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+	ops->software_rfkill(dev, true);
 	if (ops->exit)
 		ops->exit(dev);
 }
@@ -295,18 +295,13 @@ err_restore_cookie:
 	return err;
 }
 
-void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state)
+void b43_software_rfkill(struct b43_wldev *dev, bool blocked)
 {
 	struct b43_phy *phy = &dev->phy;
 
-	if (state == RFKILL_STATE_HARD_BLOCKED) {
-		/* We cannot hardware-block the device */
-		state = RFKILL_STATE_SOFT_BLOCKED;
-	}
-
 	b43_mac_suspend(dev);
-	phy->ops->software_rfkill(dev, state);
-	phy->radio_on = (state == RFKILL_STATE_UNBLOCKED);
+	phy->ops->software_rfkill(dev, blocked);
+	phy->radio_on = !blocked;
 	b43_mac_enable(dev);
 }
 
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index b2d99101947..44cc918e4fc 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -1,7 +1,7 @@
 #ifndef LINUX_B43_PHY_COMMON_H_
 #define LINUX_B43_PHY_COMMON_H_
 
-#include <linux/rfkill.h>
+#include <linux/types.h>
 
 struct b43_wldev;
 
@@ -159,7 +159,7 @@ struct b43_phy_operations {
 
 	/* Radio */
 	bool (*supports_hwpctl)(struct b43_wldev *dev);
-	void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state);
+	void (*software_rfkill)(struct b43_wldev *dev, bool blocked);
 	void (*switch_analog)(struct b43_wldev *dev, bool on);
 	int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel);
 	unsigned int (*get_default_chan)(struct b43_wldev *dev);
@@ -364,7 +364,7 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel);
 /**
  * b43_software_rfkill - Turn the radio ON or OFF in software.
  */
-void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state);
+void b43_software_rfkill(struct b43_wldev *dev, bool blocked);
 
 /**
  * b43_phy_txpower_check - Check TX power output.
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index e7b98f013b0..5300232449f 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -2592,7 +2592,7 @@ static bool b43_gphy_op_supports_hwpctl(struct b43_wldev *dev)
 }
 
 static void b43_gphy_op_software_rfkill(struct b43_wldev *dev,
-					enum rfkill_state state)
+					bool blocked)
 {
 	struct b43_phy *phy = &dev->phy;
 	struct b43_phy_g *gphy = phy->g;
@@ -2600,7 +2600,7 @@ static void b43_gphy_op_software_rfkill(struct b43_wldev *dev,
 
 	might_sleep();
 
-	if (state == RFKILL_STATE_UNBLOCKED) {
+	if (!blocked) {
 		/* Turn radio ON */
 		if (phy->radio_on)
 			return;
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 58e319d6b1e..ea0d3a3a6a6 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -488,7 +488,7 @@ static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 }
 
 static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
-					 enum rfkill_state state)
+					 bool blocked)
 {
 	//TODO
 }
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 8bcfda5f3f0..be7b5604947 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -579,7 +579,7 @@ static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 }
 
 static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
-					enum rfkill_state state)
+					bool blocked)
 {//TODO
 }
 
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 8cd9776752e..69138e8c1db 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -313,7 +313,7 @@ static struct b43_pio_txqueue *select_queue_by_priority(struct b43_wldev *dev,
 {
 	struct b43_pio_txqueue *q;
 
-	if (b43_modparam_qos) {
+	if (dev->qos_enabled) {
 		/* 0 = highest priority */
 		switch (queue_prio) {
 		default:
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index afad4235869..31e55999893 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -22,15 +22,11 @@
 
 */
 
-#include "rfkill.h"
 #include "b43.h"
-#include "phy_common.h"
-
-#include <linux/kmod.h>
 
 
 /* Returns TRUE, if the radio is enabled in hardware. */
-static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
+bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
 {
 	if (dev->phy.rev >= 3) {
 		if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
@@ -45,166 +41,39 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
 }
 
 /* The poll callback for the hardware button. */
-static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
+void b43_rfkill_poll(struct ieee80211_hw *hw)
 {
-	struct b43_wldev *dev = poll_dev->private;
-	struct b43_wl *wl = dev->wl;
+	struct b43_wl *wl = hw_to_b43_wl(hw);
+	struct b43_wldev *dev = wl->current_dev;
+	struct ssb_bus *bus = dev->dev->bus;
 	bool enabled;
-	bool report_change = 0;
+	bool brought_up = false;
 
 	mutex_lock(&wl->mutex);
 	if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) {
-		mutex_unlock(&wl->mutex);
-		return;
+		if (ssb_bus_powerup(bus, 0)) {
+			mutex_unlock(&wl->mutex);
+			return;
+		}
+		ssb_device_enable(dev->dev, 0);
+		brought_up = true;
 	}
+
 	enabled = b43_is_hw_radio_enabled(dev);
+
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
-		report_change = 1;
 		b43info(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
+		wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
+		if (enabled != dev->phy.radio_on)
+			b43_software_rfkill(dev, !enabled);
 	}
-	mutex_unlock(&wl->mutex);
 
-	/* send the radio switch event to the system - note both a key press
-	 * and a release are required */
-	if (unlikely(report_change)) {
-		input_report_key(poll_dev->input, KEY_WLAN, 1);
-		input_report_key(poll_dev->input, KEY_WLAN, 0);
+	if (brought_up) {
+		ssb_device_disable(dev->dev, 0);
+		ssb_bus_may_powerdown(bus);
 	}
-}
-
-/* Called when the RFKILL toggled in software. */
-static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
-{
-	struct b43_wldev *dev = data;
-	struct b43_wl *wl = dev->wl;
-	int err = -EBUSY;
 
-	if (!wl->rfkill.registered)
-		return 0;
-
-	mutex_lock(&wl->mutex);
-	if (b43_status(dev) < B43_STAT_INITIALIZED)
-		goto out_unlock;
-	err = 0;
-	switch (state) {
-	case RFKILL_STATE_UNBLOCKED:
-		if (!dev->radio_hw_enable) {
-			/* No luck. We can't toggle the hardware RF-kill
-			 * button from software. */
-			err = -EBUSY;
-			goto out_unlock;
-		}
-		if (!dev->phy.radio_on)
-			b43_software_rfkill(dev, state);
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		if (dev->phy.radio_on)
-			b43_software_rfkill(dev, state);
-		break;
-	default:
-		b43warn(wl, "Received unexpected rfkill state %d.\n", state);
-		break;
-	}
-out_unlock:
 	mutex_unlock(&wl->mutex);
-
-	return err;
-}
-
-char *b43_rfkill_led_name(struct b43_wldev *dev)
-{
-	struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!rfk->registered)
-		return NULL;
-	return rfkill_get_led_name(rfk->rfkill);
-}
-
-void b43_rfkill_init(struct b43_wldev *dev)
-{
-	struct b43_wl *wl = dev->wl;
-	struct b43_rfkill *rfk = &(wl->rfkill);
-	int err;
-
-	rfk->registered = 0;
-
-	rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
-	if (!rfk->rfkill)
-		goto out_error;
-	snprintf(rfk->name, sizeof(rfk->name),
-		 "b43-%s", wiphy_name(wl->hw->wiphy));
-	rfk->rfkill->name = rfk->name;
-	rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-	rfk->rfkill->data = dev;
-	rfk->rfkill->toggle_radio = b43_rfkill_soft_toggle;
-	rfk->rfkill->user_claim_unsupported = 1;
-
-	rfk->poll_dev = input_allocate_polled_device();
-	if (!rfk->poll_dev) {
-		rfkill_free(rfk->rfkill);
-		goto err_freed_rfk;
-	}
-
-	rfk->poll_dev->private = dev;
-	rfk->poll_dev->poll = b43_rfkill_poll;
-	rfk->poll_dev->poll_interval = 1000; /* msecs */
-
-	rfk->poll_dev->input->name = rfk->name;
-	rfk->poll_dev->input->id.bustype = BUS_HOST;
-	rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor;
-	rfk->poll_dev->input->evbit[0] = BIT(EV_KEY);
-	set_bit(KEY_WLAN, rfk->poll_dev->input->keybit);
-
-	err = rfkill_register(rfk->rfkill);
-	if (err)
-		goto err_free_polldev;
-
-#ifdef CONFIG_RFKILL_INPUT_MODULE
-	/* B43 RF-kill isn't useful without the rfkill-input subsystem.
-	 * Try to load the module. */
-	err = request_module("rfkill-input");
-	if (err)
-		b43warn(wl, "Failed to load the rfkill-input module. "
-			"The built-in radio LED will not work.\n");
-#endif /* CONFIG_RFKILL_INPUT */
-
-#if !defined(CONFIG_RFKILL_INPUT) && !defined(CONFIG_RFKILL_INPUT_MODULE)
-	b43warn(wl, "The rfkill-input subsystem is not available. "
-		"The built-in radio LED will not work.\n");
-#endif
-
-	err = input_register_polled_device(rfk->poll_dev);
-	if (err)
-		goto err_unreg_rfk;
-
-	rfk->registered = 1;
-
-	return;
-err_unreg_rfk:
-	rfkill_unregister(rfk->rfkill);
-err_free_polldev:
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-err_freed_rfk:
-	rfk->rfkill = NULL;
-out_error:
-	rfk->registered = 0;
-	b43warn(wl, "RF-kill button init failed\n");
-}
-
-void b43_rfkill_exit(struct b43_wldev *dev)
-{
-	struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!rfk->registered)
-		return;
-	rfk->registered = 0;
-
-	input_unregister_polled_device(rfk->poll_dev);
-	rfkill_unregister(rfk->rfkill);
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-	rfk->rfkill = NULL;
 }
diff --git a/drivers/net/wireless/b43/rfkill.h b/drivers/net/wireless/b43/rfkill.h
index adacf936d81..f046c3ca051 100644
--- a/drivers/net/wireless/b43/rfkill.h
+++ b/drivers/net/wireless/b43/rfkill.h
@@ -1,52 +1,11 @@
 #ifndef B43_RFKILL_H_
 #define B43_RFKILL_H_
 
+struct ieee80211_hw;
 struct b43_wldev;
 
+void b43_rfkill_poll(struct ieee80211_hw *hw);
 
-#ifdef CONFIG_B43_RFKILL
-
-#include <linux/rfkill.h>
-#include <linux/input-polldev.h>
-
-
-struct b43_rfkill {
-	/* The RFKILL subsystem data structure */
-	struct rfkill *rfkill;
-	/* The poll device for the RFKILL input button */
-	struct input_polled_dev *poll_dev;
-	/* Did initialization succeed? Used for freeing. */
-	bool registered;
-	/* The unique name of this rfkill switch */
-	char name[sizeof("b43-phy4294967295")];
-};
-
-/* The init function returns void, because we are not interested
- * in failing the b43 init process when rfkill init failed. */
-void b43_rfkill_init(struct b43_wldev *dev);
-void b43_rfkill_exit(struct b43_wldev *dev);
-
-char * b43_rfkill_led_name(struct b43_wldev *dev);
-
-
-#else /* CONFIG_B43_RFKILL */
-/* No RFKILL support. */
-
-struct b43_rfkill {
-	/* empty */
-};
-
-static inline void b43_rfkill_init(struct b43_wldev *dev)
-{
-}
-static inline void b43_rfkill_exit(struct b43_wldev *dev)
-{
-}
-static inline char * b43_rfkill_led_name(struct b43_wldev *dev)
-{
-	return NULL;
-}
-
-#endif /* CONFIG_B43_RFKILL */
+bool b43_is_hw_radio_enabled(struct b43_wldev *dev);
 
 #endif /* B43_RFKILL_H_ */
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index a63d88841df..55f36a7254d 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -118,7 +118,6 @@ u8 b43_plcp_get_ratecode_ofdm(const u8 bitrate)
 void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp,
 			   const u16 octets, const u8 bitrate)
 {
-	__le32 *data = &(plcp->data);
 	__u8 *raw = plcp->raw;
 
 	if (b43_is_ofdm_rate(bitrate)) {
@@ -127,7 +126,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp,
 		d = b43_plcp_get_ratecode_ofdm(bitrate);
 		B43_WARN_ON(octets & 0xF000);
 		d |= (octets << 5);
-		*data = cpu_to_le32(d);
+		plcp->data = cpu_to_le32(d);
 	} else {
 		u32 plen;
 
@@ -141,7 +140,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp,
 				raw[1] = 0x04;
 		} else
 			raw[1] = 0x04;
-		*data |= cpu_to_le32(plen << 16);
+		plcp->data |= cpu_to_le32(plen << 16);
 		raw[0] = b43_plcp_get_ratecode_cck(bitrate);
 	}
 }
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index aef2298d37a..94a46347805 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -3,7 +3,6 @@ config B43LEGACY
 	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
-	select HW_RANDOM
 	---help---
 	  b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
 	  BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the
@@ -43,12 +42,11 @@ config B43LEGACY_LEDS
 	depends on B43LEGACY && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43LEGACY)
 	default y
 
-# RFKILL support
-# This config option automatically enables b43legacy RFKILL support,
-# if it's possible.
-config B43LEGACY_RFKILL
+# This config option automatically enables b43 HW-RNG support,
+# if the HW-RNG core is enabled.
+config B43LEGACY_HWRNG
 	bool
-	depends on B43LEGACY && (RFKILL = y || RFKILL = B43LEGACY) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43LEGACY)
+	depends on B43LEGACY && (HW_RANDOM = y || HW_RANDOM = B43LEGACY)
 	default y
 
 config B43LEGACY_DEBUG
diff --git a/drivers/net/wireless/b43legacy/Makefile b/drivers/net/wireless/b43legacy/Makefile
index 80cdb73bd14..227a77e8436 100644
--- a/drivers/net/wireless/b43legacy/Makefile
+++ b/drivers/net/wireless/b43legacy/Makefile
@@ -6,7 +6,7 @@ b43legacy-y				+= radio.o
 b43legacy-y				+= sysfs.o
 b43legacy-y				+= xmit.o
 # b43 RFKILL button support
-b43legacy-$(CONFIG_B43LEGACY_RFKILL)	+= rfkill.o
+b43legacy-y				+= rfkill.o
 # b43legacy LED support
 b43legacy-$(CONFIG_B43LEGACY_LEDS)	+= leds.o
 # b43legacy debugging
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 97b0e06dfe2..77fda148ac4 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -59,7 +59,8 @@
 #define B43legacy_MMIO_XMITSTAT_1		0x174
 #define B43legacy_MMIO_REV3PLUS_TSF_LOW	0x180 /* core rev >= 3 only */
 #define B43legacy_MMIO_REV3PLUS_TSF_HIGH	0x184 /* core rev >= 3 only */
-
+#define B43legacy_MMIO_TSF_CFP_REP	0x188
+#define B43legacy_MMIO_TSF_CFP_START	0x18C
 /* 32-bit DMA */
 #define B43legacy_MMIO_DMA32_BASE0	0x200
 #define B43legacy_MMIO_DMA32_BASE1	0x220
@@ -258,7 +259,6 @@
 
 #define B43legacy_IRQ_ALL		0xFFFFFFFF
 #define B43legacy_IRQ_MASKTEMPLATE	(B43legacy_IRQ_MAC_SUSPENDED |	\
-					 B43legacy_IRQ_BEACON |		\
 					 B43legacy_IRQ_TBTT_INDI |	\
 					 B43legacy_IRQ_ATIM_END |	\
 					 B43legacy_IRQ_PMQ |		\
@@ -596,12 +596,11 @@ struct b43legacy_wl {
 	/* Stats about the wireless interface */
 	struct ieee80211_low_level_stats ieee_stats;
 
+#ifdef CONFIG_B43LEGACY_HWRNG
 	struct hwrng rng;
 	u8 rng_initialized;
 	char rng_name[30 + 1];
-
-	/* The RF-kill button */
-	struct b43legacy_rfkill rfkill;
+#endif
 
 	/* List of all wireless devices on this chip */
 	struct list_head devlist;
@@ -614,6 +613,8 @@ struct b43legacy_wl {
 	struct sk_buff *current_beacon;
 	bool beacon0_uploaded;
 	bool beacon1_uploaded;
+	bool beacon_templates_virgin; /* Never wrote the templates? */
+	struct work_struct beacon_update_trigger;
 };
 
 /* Pointers to the firmware data and meta information about it. */
@@ -690,8 +691,8 @@ struct b43legacy_wldev {
 	/* Reason code of the last interrupt. */
 	u32 irq_reason;
 	u32 dma_reason[6];
-	/* saved irq enable/disable state bitfield. */
-	u32 irq_savedstate;
+	/* The currently active generic-interrupt mask. */
+	u32 irq_mask;
 	/* Link Quality calculation context. */
 	struct b43legacy_noise_calculation noisecalc;
 	/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
diff --git a/drivers/net/wireless/b43legacy/leds.c b/drivers/net/wireless/b43legacy/leds.c
index 3ea55b18c70..37e9be89356 100644
--- a/drivers/net/wireless/b43legacy/leds.c
+++ b/drivers/net/wireless/b43legacy/leds.c
@@ -28,6 +28,7 @@
 
 #include "b43legacy.h"
 #include "leds.h"
+#include "rfkill.h"
 
 
 static void b43legacy_led_turn_on(struct b43legacy_wldev *dev, u8 led_index,
@@ -86,7 +87,8 @@ static void b43legacy_led_brightness_set(struct led_classdev *led_dev,
 
 static int b43legacy_register_led(struct b43legacy_wldev *dev,
 				  struct b43legacy_led *led,
-				  const char *name, char *default_trigger,
+				  const char *name,
+				  const char *default_trigger,
 				  u8 led_index, bool activelow)
 {
 	int err;
@@ -163,10 +165,10 @@ static void b43legacy_map_led(struct b43legacy_wldev *dev,
 		snprintf(name, sizeof(name),
 			 "b43legacy-%s::radio", wiphy_name(hw->wiphy));
 		b43legacy_register_led(dev, &dev->led_radio, name,
-				 b43legacy_rfkill_led_name(dev),
+				 ieee80211_get_radio_led_name(hw),
 				 led_index, activelow);
-		/* Sync the RF-kill LED state with the switch state. */
-		if (dev->radio_hw_enable)
+		/* Sync the RF-kill LED state with radio and switch states. */
+		if (dev->phy.radio_on && b43legacy_is_hw_radio_enabled(dev))
 			b43legacy_led_turn_on(dev, led_index, activelow);
 		break;
 	case B43legacy_LED_WEIRD:
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 879edc78671..e5136fb65dd 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -583,35 +583,6 @@ static void b43legacy_short_slot_timing_disable(struct b43legacy_wldev *dev)
 	b43legacy_set_slot_time(dev, 20);
 }
 
-/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
- * Returns the _previously_ enabled IRQ mask.
- */
-static inline u32 b43legacy_interrupt_enable(struct b43legacy_wldev *dev,
-					     u32 mask)
-{
-	u32 old_mask;
-
-	old_mask = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
-	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, old_mask |
-			  mask);
-
-	return old_mask;
-}
-
-/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
- * Returns the _previously_ enabled IRQ mask.
- */
-static inline u32 b43legacy_interrupt_disable(struct b43legacy_wldev *dev,
-					      u32 mask)
-{
-	u32 old_mask;
-
-	old_mask = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
-	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
-
-	return old_mask;
-}
-
 /* Synchronize IRQ top- and bottom-half.
  * IRQs must be masked before calling this.
  * This must not be called with the irq_lock held.
@@ -955,23 +926,54 @@ static void b43legacy_write_template_common(struct b43legacy_wldev *dev,
 			      size + sizeof(struct b43legacy_plcp_hdr6));
 }
 
+/* Convert a b43legacy antenna number value to the PHY TX control value. */
+static u16 b43legacy_antenna_to_phyctl(int antenna)
+{
+	switch (antenna) {
+	case B43legacy_ANTENNA0:
+		return B43legacy_TX4_PHY_ANT0;
+	case B43legacy_ANTENNA1:
+		return B43legacy_TX4_PHY_ANT1;
+	}
+	return B43legacy_TX4_PHY_ANTLAST;
+}
+
 static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev,
 					    u16 ram_offset,
-					    u16 shm_size_offset, u8 rate)
+					    u16 shm_size_offset)
 {
 
 	unsigned int i, len, variable_len;
 	const struct ieee80211_mgmt *bcn;
 	const u8 *ie;
 	bool tim_found = 0;
+	unsigned int rate;
+	u16 ctl;
+	int antenna;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
 
 	bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
 	len = min((size_t)dev->wl->current_beacon->len,
 		  0x200 - sizeof(struct b43legacy_plcp_hdr6));
+	rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
 
 	b43legacy_write_template_common(dev, (const u8 *)bcn, len, ram_offset,
 					shm_size_offset, rate);
 
+	/* Write the PHY TX control parameters. */
+	antenna = B43legacy_ANTENNA_DEFAULT;
+	antenna = b43legacy_antenna_to_phyctl(antenna);
+	ctl = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
+				   B43legacy_SHM_SH_BEACPHYCTL);
+	/* We can't send beacons with short preamble. Would get PHY errors. */
+	ctl &= ~B43legacy_TX4_PHY_SHORTPRMBL;
+	ctl &= ~B43legacy_TX4_PHY_ANT;
+	ctl &= ~B43legacy_TX4_PHY_ENC;
+	ctl |= antenna;
+	ctl |= B43legacy_TX4_PHY_ENC_CCK;
+	b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
+			      B43legacy_SHM_SH_BEACPHYCTL, ctl);
+
 	/* Find the position of the TIM and the DTIM_period value
 	 * and write them to SHM. */
 	ie = bcn->u.beacon.variable;
@@ -1013,7 +1015,8 @@ static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev,
 		b43legacywarn(dev->wl, "Did not find a valid TIM IE in the "
 			      "beacon template packet. AP or IBSS operation "
 			      "may be broken.\n");
-	}
+	} else
+		b43legacydbg(dev->wl, "Updated beacon template\n");
 }
 
 static void b43legacy_write_probe_resp_plcp(struct b43legacy_wldev *dev,
@@ -1025,7 +1028,7 @@ static void b43legacy_write_probe_resp_plcp(struct b43legacy_wldev *dev,
 	__le16 dur;
 
 	plcp.data = 0;
-	b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->bitrate);
+	b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
 	dur = ieee80211_generic_frame_duration(dev->wl->hw,
 					       dev->wl->vif,
 					       size,
@@ -1129,10 +1132,103 @@ static void b43legacy_write_probe_resp_template(struct b43legacy_wldev *dev,
 		   0x200 - sizeof(struct b43legacy_plcp_hdr6));
 	b43legacy_write_template_common(dev, probe_resp_data,
 					size, ram_offset,
-					shm_size_offset, rate->bitrate);
+					shm_size_offset, rate->hw_value);
 	kfree(probe_resp_data);
 }
 
+static void b43legacy_upload_beacon0(struct b43legacy_wldev *dev)
+{
+	struct b43legacy_wl *wl = dev->wl;
+
+	if (wl->beacon0_uploaded)
+		return;
+	b43legacy_write_beacon_template(dev, 0x68, 0x18);
+	/* FIXME: Probe resp upload doesn't really belong here,
+	 *        but we don't use that feature anyway. */
+	b43legacy_write_probe_resp_template(dev, 0x268, 0x4A,
+				      &__b43legacy_ratetable[3]);
+	wl->beacon0_uploaded = 1;
+}
+
+static void b43legacy_upload_beacon1(struct b43legacy_wldev *dev)
+{
+	struct b43legacy_wl *wl = dev->wl;
+
+	if (wl->beacon1_uploaded)
+		return;
+	b43legacy_write_beacon_template(dev, 0x468, 0x1A);
+	wl->beacon1_uploaded = 1;
+}
+
+static void handle_irq_beacon(struct b43legacy_wldev *dev)
+{
+	struct b43legacy_wl *wl = dev->wl;
+	u32 cmd, beacon0_valid, beacon1_valid;
+
+	if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
+		return;
+
+	/* This is the bottom half of the asynchronous beacon update. */
+
+	/* Ignore interrupt in the future. */
+	dev->irq_mask &= ~B43legacy_IRQ_BEACON;
+
+	cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+	beacon0_valid = (cmd & B43legacy_MACCMD_BEACON0_VALID);
+	beacon1_valid = (cmd & B43legacy_MACCMD_BEACON1_VALID);
+
+	/* Schedule interrupt manually, if busy. */
+	if (beacon0_valid && beacon1_valid) {
+		b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, B43legacy_IRQ_BEACON);
+		dev->irq_mask |= B43legacy_IRQ_BEACON;
+		return;
+	}
+
+	if (unlikely(wl->beacon_templates_virgin)) {
+		/* We never uploaded a beacon before.
+		 * Upload both templates now, but only mark one valid. */
+		wl->beacon_templates_virgin = 0;
+		b43legacy_upload_beacon0(dev);
+		b43legacy_upload_beacon1(dev);
+		cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+		cmd |= B43legacy_MACCMD_BEACON0_VALID;
+		b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+	} else {
+		if (!beacon0_valid) {
+			b43legacy_upload_beacon0(dev);
+			cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+			cmd |= B43legacy_MACCMD_BEACON0_VALID;
+			b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+		} else if (!beacon1_valid) {
+			b43legacy_upload_beacon1(dev);
+			cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
+			cmd |= B43legacy_MACCMD_BEACON1_VALID;
+			b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+		}
+	}
+}
+
+static void b43legacy_beacon_update_trigger_work(struct work_struct *work)
+{
+	struct b43legacy_wl *wl = container_of(work, struct b43legacy_wl,
+					 beacon_update_trigger);
+	struct b43legacy_wldev *dev;
+
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+	if (likely(dev && (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED))) {
+		spin_lock_irq(&wl->irq_lock);
+		/* Update beacon right away or defer to IRQ. */
+		handle_irq_beacon(dev);
+		/* The handler might have updated the IRQ mask. */
+		b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK,
+				  dev->irq_mask);
+		mmiowb();
+		spin_unlock_irq(&wl->irq_lock);
+	}
+	mutex_unlock(&wl->mutex);
+}
+
 /* Asynchronously update the packet templates in template RAM.
  * Locking: Requires wl->irq_lock to be locked. */
 static void b43legacy_update_templates(struct b43legacy_wl *wl)
@@ -1156,54 +1252,24 @@ static void b43legacy_update_templates(struct b43legacy_wl *wl)
 	wl->current_beacon = beacon;
 	wl->beacon0_uploaded = 0;
 	wl->beacon1_uploaded = 0;
+	queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
 }
 
 static void b43legacy_set_beacon_int(struct b43legacy_wldev *dev,
 				     u16 beacon_int)
 {
 	b43legacy_time_lock(dev);
-	if (dev->dev->id.revision >= 3)
-		b43legacy_write32(dev, 0x188, (beacon_int << 16));
-	else {
+	if (dev->dev->id.revision >= 3) {
+		b43legacy_write32(dev, B43legacy_MMIO_TSF_CFP_REP,
+				 (beacon_int << 16));
+		b43legacy_write32(dev, B43legacy_MMIO_TSF_CFP_START,
+				 (beacon_int << 10));
+	} else {
 		b43legacy_write16(dev, 0x606, (beacon_int >> 6));
 		b43legacy_write16(dev, 0x610, beacon_int);
 	}
 	b43legacy_time_unlock(dev);
-}
-
-static void handle_irq_beacon(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_wl *wl = dev->wl;
-	u32 cmd;
-
-	if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
-		return;
-
-	/* This is the bottom half of the asynchronous beacon update. */
-
-	cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
-	if (!(cmd & B43legacy_MACCMD_BEACON0_VALID)) {
-		if (!wl->beacon0_uploaded) {
-			b43legacy_write_beacon_template(dev, 0x68,
-							B43legacy_SHM_SH_BTL0,
-							B43legacy_CCK_RATE_1MB);
-			b43legacy_write_probe_resp_template(dev, 0x268,
-							    B43legacy_SHM_SH_PRTLEN,
-							    &__b43legacy_ratetable[3]);
-			wl->beacon0_uploaded = 1;
-		}
-		cmd |= B43legacy_MACCMD_BEACON0_VALID;
-	}
-	if (!(cmd & B43legacy_MACCMD_BEACON1_VALID)) {
-		if (!wl->beacon1_uploaded) {
-			b43legacy_write_beacon_template(dev, 0x468,
-							B43legacy_SHM_SH_BTL1,
-							B43legacy_CCK_RATE_1MB);
-			wl->beacon1_uploaded = 1;
-		}
-		cmd |= B43legacy_MACCMD_BEACON1_VALID;
-	}
-	b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
+	b43legacydbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
 }
 
 static void handle_irq_ucode_debug(struct b43legacy_wldev *dev)
@@ -1302,7 +1368,7 @@ static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev)
 	if (reason & B43legacy_IRQ_TX_OK)
 		handle_irq_transmit_status(dev);
 
-	b43legacy_interrupt_enable(dev, dev->irq_savedstate);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 	mmiowb();
 	spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
 }
@@ -1354,18 +1420,18 @@ static irqreturn_t b43legacy_interrupt_handler(int irq, void *dev_id)
 	struct b43legacy_wldev *dev = dev_id;
 	u32 reason;
 
-	if (!dev)
-		return IRQ_NONE;
+	B43legacy_WARN_ON(!dev);
 
 	spin_lock(&dev->wl->irq_lock);
 
-	if (b43legacy_status(dev) < B43legacy_STAT_STARTED)
+	if (unlikely(b43legacy_status(dev) < B43legacy_STAT_STARTED))
+		/* This can only happen on shared IRQ lines. */
 		goto out;
 	reason = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
 	if (reason == 0xffffffff) /* shared IRQ */
 		goto out;
 	ret = IRQ_HANDLED;
-	reason &= b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
+	reason &= dev->irq_mask;
 	if (!reason)
 		goto out;
 
@@ -1389,10 +1455,9 @@ static irqreturn_t b43legacy_interrupt_handler(int irq, void *dev_id)
 					      & 0x0000DC00;
 
 	b43legacy_interrupt_ack(dev, reason);
-	/* disable all IRQs. They are enabled again in the bottom half. */
-	dev->irq_savedstate = b43legacy_interrupt_disable(dev,
-							  B43legacy_IRQ_ALL);
-	/* save the reason code and call our bottom half. */
+	/* Disable all IRQs. They are enabled again in the bottom half. */
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
+	/* Save the reason code and call our bottom half. */
 	dev->irq_reason = reason;
 	tasklet_schedule(&dev->isr_tasklet);
 out:
@@ -1852,7 +1917,8 @@ void b43legacy_mac_enable(struct b43legacy_wldev *dev)
 
 		/* Re-enable IRQs. */
 		spin_lock_irq(&dev->wl->irq_lock);
-		b43legacy_interrupt_enable(dev, dev->irq_savedstate);
+		b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK,
+				  dev->irq_mask);
 		spin_unlock_irq(&dev->wl->irq_lock);
 	}
 }
@@ -1871,10 +1937,9 @@ void b43legacy_mac_suspend(struct b43legacy_wldev *dev)
 		/* Mask IRQs before suspending MAC. Otherwise
 		 * the MAC stays busy and won't suspend. */
 		spin_lock_irq(&dev->wl->irq_lock);
-		tmp = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL);
+		b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
 		spin_unlock_irq(&dev->wl->irq_lock);
 		b43legacy_synchronize_irq(dev);
-		dev->irq_savedstate = tmp;
 
 		b43legacy_power_saving_ctl_bits(dev, -1, 1);
 		b43legacy_write32(dev, B43legacy_MMIO_MACCTL,
@@ -2297,6 +2362,7 @@ static void b43legacy_security_init(struct b43legacy_wldev *dev)
 				  dev->max_nr_keys - 8);
 }
 
+#ifdef CONFIG_B43LEGACY_HWRNG
 static int b43legacy_rng_read(struct hwrng *rng, u32 *data)
 {
 	struct b43legacy_wl *wl = (struct b43legacy_wl *)rng->priv;
@@ -2312,17 +2378,21 @@ static int b43legacy_rng_read(struct hwrng *rng, u32 *data)
 
 	return (sizeof(u16));
 }
+#endif
 
 static void b43legacy_rng_exit(struct b43legacy_wl *wl)
 {
+#ifdef CONFIG_B43LEGACY_HWRNG
 	if (wl->rng_initialized)
 		hwrng_unregister(&wl->rng);
+#endif
 }
 
 static int b43legacy_rng_init(struct b43legacy_wl *wl)
 {
-	int err;
+	int err = 0;
 
+#ifdef CONFIG_B43LEGACY_HWRNG
 	snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
 		 "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
 	wl->rng.name = wl->rng_name;
@@ -2336,6 +2406,7 @@ static int b43legacy_rng_init(struct b43legacy_wl *wl)
 		       "number generator (%d)\n", err);
 	}
 
+#endif
 	return err;
 }
 
@@ -2557,7 +2628,6 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	int antenna_tx;
 	int antenna_rx;
 	int err = 0;
-	u32 savedirqs;
 
 	antenna_tx = B43legacy_ANTENNA_DEFAULT;
 	antenna_rx = B43legacy_ANTENNA_DEFAULT;
@@ -2597,7 +2667,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 		spin_unlock_irqrestore(&wl->irq_lock, flags);
 		goto out_unlock_mutex;
 	}
-	savedirqs = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 	b43legacy_synchronize_irq(dev);
 
@@ -2619,11 +2689,6 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	/* Antennas for RX and management frame TX. */
 	b43legacy_mgmtframe_txantenna(dev, antenna_tx);
 
-	/* Update templates for AP mode. */
-	if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
-		b43legacy_set_beacon_int(dev, conf->beacon_int);
-
-
 	if (!!conf->radio_enabled != phy->radio_on) {
 		if (conf->radio_enabled) {
 			b43legacy_radio_turn_on(dev);
@@ -2641,7 +2706,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
 	}
 
 	spin_lock_irqsave(&wl->irq_lock, flags);
-	b43legacy_interrupt_enable(dev, savedirqs);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 	mmiowb();
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 out_unlock_mutex:
@@ -2704,9 +2769,9 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
 	struct b43legacy_wldev *dev;
 	struct b43legacy_phy *phy;
 	unsigned long flags;
-	u32 savedirqs;
 
 	mutex_lock(&wl->mutex);
+	B43legacy_WARN_ON(wl->vif != vif);
 
 	dev = wl->current_dev;
 	phy = &dev->phy;
@@ -2719,12 +2784,35 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
 		spin_unlock_irqrestore(&wl->irq_lock, flags);
 		goto out_unlock_mutex;
 	}
-	savedirqs = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
+
+	if (changed & BSS_CHANGED_BSSID) {
+		b43legacy_synchronize_irq(dev);
+
+		if (conf->bssid)
+			memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+		else
+			memset(wl->bssid, 0, ETH_ALEN);
+	}
+
+	if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) {
+		if (changed & BSS_CHANGED_BEACON &&
+		    (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
+		     b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+			b43legacy_update_templates(wl);
+
+		if (changed & BSS_CHANGED_BSSID)
+			b43legacy_write_mac_bssid_templates(dev);
+	}
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	b43legacy_synchronize_irq(dev);
 
 	b43legacy_mac_suspend(dev);
 
+	if (changed & BSS_CHANGED_BEACON_INT &&
+	    (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
+	     b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+		b43legacy_set_beacon_int(dev, conf->beacon_int);
+
 	if (changed & BSS_CHANGED_BASIC_RATES)
 		b43legacy_update_basic_rates(dev, conf->basic_rates);
 
@@ -2738,14 +2826,12 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
 	b43legacy_mac_enable(dev);
 
 	spin_lock_irqsave(&wl->irq_lock, flags);
-	b43legacy_interrupt_enable(dev, savedirqs);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 	/* XXX: why? */
 	mmiowb();
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
  out_unlock_mutex:
 	mutex_unlock(&wl->mutex);
-
-	return;
 }
 
 static void b43legacy_op_configure_filter(struct ieee80211_hw *hw,
@@ -2787,40 +2873,6 @@ static void b43legacy_op_configure_filter(struct ieee80211_hw *hw,
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 }
 
-static int b43legacy_op_config_interface(struct ieee80211_hw *hw,
-					 struct ieee80211_vif *vif,
-					 struct ieee80211_if_conf *conf)
-{
-	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
-	struct b43legacy_wldev *dev = wl->current_dev;
-	unsigned long flags;
-
-	if (!dev)
-		return -ENODEV;
-	mutex_lock(&wl->mutex);
-	spin_lock_irqsave(&wl->irq_lock, flags);
-	B43legacy_WARN_ON(wl->vif != vif);
-	if (conf->bssid)
-		memcpy(wl->bssid, conf->bssid, ETH_ALEN);
-	else
-		memset(wl->bssid, 0, ETH_ALEN);
-	if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) {
-		if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) {
-			B43legacy_WARN_ON(vif->type != NL80211_IFTYPE_AP);
-			if (conf->changed & IEEE80211_IFCC_BEACON)
-				b43legacy_update_templates(wl);
-		} else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
-			if (conf->changed & IEEE80211_IFCC_BEACON)
-				b43legacy_update_templates(wl);
-		}
-		b43legacy_write_mac_bssid_templates(dev);
-	}
-	spin_unlock_irqrestore(&wl->irq_lock, flags);
-	mutex_unlock(&wl->mutex);
-
-	return 0;
-}
-
 /* Locking: wl->mutex */
 static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
 {
@@ -2834,8 +2886,7 @@ static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
 	 * setting the status to INITIALIZED, as the interrupt handler
 	 * won't care about IRQs then. */
 	spin_lock_irqsave(&wl->irq_lock, flags);
-	dev->irq_savedstate = b43legacy_interrupt_disable(dev,
-							  B43legacy_IRQ_ALL);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
 	b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */
 	spin_unlock_irqrestore(&wl->irq_lock, flags);
 	b43legacy_synchronize_irq(dev);
@@ -2875,7 +2926,7 @@ static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev)
 
 	/* Start data flow (TX/RX) */
 	b43legacy_mac_enable(dev);
-	b43legacy_interrupt_enable(dev, dev->irq_savedstate);
+	b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 
 	/* Start maintenance work */
 	b43legacy_periodic_tasks_setup(dev);
@@ -3038,7 +3089,7 @@ static void setup_struct_wldev_for_init(struct b43legacy_wldev *dev)
 	/* IRQ related flags */
 	dev->irq_reason = 0;
 	memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
-	dev->irq_savedstate = B43legacy_IRQ_MASKTEMPLATE;
+	dev->irq_mask = B43legacy_IRQ_MASKTEMPLATE;
 
 	dev->mac_suspended = 1;
 
@@ -3380,11 +3431,6 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 	struct b43legacy_wldev *dev = wl->current_dev;
 	int did_init = 0;
 	int err = 0;
-	bool do_rfkill_exit = 0;
-
-	/* First register RFkill.
-	 * LEDs that are registered later depend on it. */
-	b43legacy_rfkill_init(dev);
 
 	/* Kill all old instance specific information to make sure
 	 * the card won't use it in the short timeframe between start
@@ -3392,15 +3438,16 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 	memset(wl->bssid, 0, ETH_ALEN);
 	memset(wl->mac_addr, 0, ETH_ALEN);
 	wl->filter_flags = 0;
+	wl->beacon0_uploaded = 0;
+	wl->beacon1_uploaded = 0;
+	wl->beacon_templates_virgin = 1;
 
 	mutex_lock(&wl->mutex);
 
 	if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) {
 		err = b43legacy_wireless_core_init(dev);
-		if (err) {
-			do_rfkill_exit = 1;
+		if (err)
 			goto out_mutex_unlock;
-		}
 		did_init = 1;
 	}
 
@@ -3409,17 +3456,15 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
 		if (err) {
 			if (did_init)
 				b43legacy_wireless_core_exit(dev);
-			do_rfkill_exit = 1;
 			goto out_mutex_unlock;
 		}
 	}
 
+	wiphy_rfkill_start_polling(hw->wiphy);
+
 out_mutex_unlock:
 	mutex_unlock(&wl->mutex);
 
-	if (do_rfkill_exit)
-		b43legacy_rfkill_exit(dev);
-
 	return err;
 }
 
@@ -3428,7 +3473,7 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw)
 	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
 	struct b43legacy_wldev *dev = wl->current_dev;
 
-	b43legacy_rfkill_exit(dev);
+	cancel_work_sync(&(wl->beacon_update_trigger));
 
 	mutex_lock(&wl->mutex);
 	if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
@@ -3457,13 +3502,13 @@ static const struct ieee80211_ops b43legacy_hw_ops = {
 	.remove_interface	= b43legacy_op_remove_interface,
 	.config			= b43legacy_op_dev_config,
 	.bss_info_changed	= b43legacy_op_bss_info_changed,
-	.config_interface	= b43legacy_op_config_interface,
 	.configure_filter	= b43legacy_op_configure_filter,
 	.get_stats		= b43legacy_op_get_stats,
 	.get_tx_stats		= b43legacy_op_get_tx_stats,
 	.start			= b43legacy_op_start,
 	.stop			= b43legacy_op_stop,
 	.set_tim		= b43legacy_op_beacon_set_tim,
+	.rfkill_poll		= b43legacy_rfkill_poll,
 };
 
 /* Hard-reset the chip. Do not call this directly.
@@ -3760,6 +3805,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 	spin_lock_init(&wl->leds_lock);
 	mutex_init(&wl->mutex);
 	INIT_LIST_HEAD(&wl->devlist);
+	INIT_WORK(&wl->beacon_update_trigger, b43legacy_beacon_update_trigger_work);
 
 	ssb_set_devtypedata(dev, wl);
 	b43legacyinfo(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c
index 746d5361bba..51866c9a276 100644
--- a/drivers/net/wireless/b43legacy/pio.c
+++ b/drivers/net/wireless/b43legacy/pio.c
@@ -443,7 +443,7 @@ int b43legacy_pio_init(struct b43legacy_wldev *dev)
 	pio->queue3 = queue;
 
 	if (dev->dev->id.revision < 3)
-		dev->irq_savedstate |= B43legacy_IRQ_PIO_WORKAROUND;
+		dev->irq_mask |= B43legacy_IRQ_PIO_WORKAROUND;
 
 	b43legacydbg(dev->wl, "PIO initialized\n");
 	err = 0;
diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c
index b32bf6a94f1..8783022db11 100644
--- a/drivers/net/wireless/b43legacy/rfkill.c
+++ b/drivers/net/wireless/b43legacy/rfkill.c
@@ -22,15 +22,12 @@
 
 */
 
-#include "rfkill.h"
 #include "radio.h"
 #include "b43legacy.h"
 
-#include <linux/kmod.h>
-
 
 /* Returns TRUE, if the radio is enabled in hardware. */
-static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
+bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 {
 	if (dev->phy.rev >= 3) {
 		if (!(b43legacy_read32(dev, B43legacy_MMIO_RADIO_HWENABLED_HI)
@@ -45,165 +42,43 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 }
 
 /* The poll callback for the hardware button. */
-static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
+void b43legacy_rfkill_poll(struct ieee80211_hw *hw)
 {
-	struct b43legacy_wldev *dev = poll_dev->private;
-	struct b43legacy_wl *wl = dev->wl;
+	struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
+	struct b43legacy_wldev *dev = wl->current_dev;
+	struct ssb_bus *bus = dev->dev->bus;
 	bool enabled;
-	bool report_change = 0;
+	bool brought_up = false;
 
 	mutex_lock(&wl->mutex);
 	if (unlikely(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)) {
-		mutex_unlock(&wl->mutex);
-		return;
+		if (ssb_bus_powerup(bus, 0)) {
+			mutex_unlock(&wl->mutex);
+			return;
+		}
+		ssb_device_enable(dev->dev, 0);
+		brought_up = true;
 	}
+
 	enabled = b43legacy_is_hw_radio_enabled(dev);
+
 	if (unlikely(enabled != dev->radio_hw_enable)) {
 		dev->radio_hw_enable = enabled;
-		report_change = 1;
 		b43legacyinfo(wl, "Radio hardware status changed to %s\n",
 			enabled ? "ENABLED" : "DISABLED");
-	}
-	mutex_unlock(&wl->mutex);
-
-	/* send the radio switch event to the system - note both a key press
-	 * and a release are required */
-	if (unlikely(report_change)) {
-		input_report_key(poll_dev->input, KEY_WLAN, 1);
-		input_report_key(poll_dev->input, KEY_WLAN, 0);
-	}
-}
-
-/* Called when the RFKILL toggled in software.
- * This is called without locking. */
-static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state)
-{
-	struct b43legacy_wldev *dev = data;
-	struct b43legacy_wl *wl = dev->wl;
-	int err = -EBUSY;
-
-	if (!wl->rfkill.registered)
-		return 0;
-
-	mutex_lock(&wl->mutex);
-	if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)
-		goto out_unlock;
-	err = 0;
-	switch (state) {
-	case RFKILL_STATE_UNBLOCKED:
-		if (!dev->radio_hw_enable) {
-			/* No luck. We can't toggle the hardware RF-kill
-			 * button from software. */
-			err = -EBUSY;
-			goto out_unlock;
+		wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
+		if (enabled != dev->phy.radio_on) {
+			if (enabled)
+				b43legacy_radio_turn_on(dev);
+			else
+				b43legacy_radio_turn_off(dev, 0);
 		}
-		if (!dev->phy.radio_on)
-			b43legacy_radio_turn_on(dev);
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		if (dev->phy.radio_on)
-			b43legacy_radio_turn_off(dev, 0);
-		break;
-	default:
-		b43legacywarn(wl, "Received unexpected rfkill state %d.\n",
-			      state);
-		break;
 	}
 
-out_unlock:
-	mutex_unlock(&wl->mutex);
-
-	return err;
-}
-
-char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!rfk->registered)
-		return NULL;
-	return rfkill_get_led_name(rfk->rfkill);
-}
-
-void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_wl *wl = dev->wl;
-	struct b43legacy_rfkill *rfk = &(wl->rfkill);
-	int err;
-
-	rfk->registered = 0;
-
-	rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
-	if (!rfk->rfkill)
-		goto out_error;
-	snprintf(rfk->name, sizeof(rfk->name),
-		 "b43legacy-%s", wiphy_name(wl->hw->wiphy));
-	rfk->rfkill->name = rfk->name;
-	rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-	rfk->rfkill->data = dev;
-	rfk->rfkill->toggle_radio = b43legacy_rfkill_soft_toggle;
-	rfk->rfkill->user_claim_unsupported = 1;
-
-	rfk->poll_dev = input_allocate_polled_device();
-	if (!rfk->poll_dev) {
-		rfkill_free(rfk->rfkill);
-		goto err_freed_rfk;
+	if (brought_up) {
+		ssb_device_disable(dev->dev, 0);
+		ssb_bus_may_powerdown(bus);
 	}
 
-	rfk->poll_dev->private = dev;
-	rfk->poll_dev->poll = b43legacy_rfkill_poll;
-	rfk->poll_dev->poll_interval = 1000; /* msecs */
-
-	rfk->poll_dev->input->name = rfk->name;
-	rfk->poll_dev->input->id.bustype = BUS_HOST;
-	rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor;
-	rfk->poll_dev->input->evbit[0] = BIT(EV_KEY);
-	set_bit(KEY_WLAN, rfk->poll_dev->input->keybit);
-
-	err = rfkill_register(rfk->rfkill);
-	if (err)
-		goto err_free_polldev;
-
-#ifdef CONFIG_RFKILL_INPUT_MODULE
-	/* B43legacy RF-kill isn't useful without the rfkill-input subsystem.
-	 * Try to load the module. */
-	err = request_module("rfkill-input");
-	if (err)
-		b43legacywarn(wl, "Failed to load the rfkill-input module."
-			"The built-in radio LED will not work.\n");
-#endif /* CONFIG_RFKILL_INPUT */
-
-	err = input_register_polled_device(rfk->poll_dev);
-	if (err)
-		goto err_unreg_rfk;
-
-	rfk->registered = 1;
-
-	return;
-err_unreg_rfk:
-	rfkill_unregister(rfk->rfkill);
-err_free_polldev:
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-err_freed_rfk:
-	rfk->rfkill = NULL;
-out_error:
-	rfk->registered = 0;
-	b43legacywarn(wl, "RF-kill button init failed\n");
-}
-
-void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
-{
-	struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
-	if (!rfk->registered)
-		return;
-	rfk->registered = 0;
-
-	input_unregister_polled_device(rfk->poll_dev);
-	rfkill_unregister(rfk->rfkill);
-	input_free_polled_device(rfk->poll_dev);
-	rfk->poll_dev = NULL;
-	rfk->rfkill = NULL;
+	mutex_unlock(&wl->mutex);
 }
-
diff --git a/drivers/net/wireless/b43legacy/rfkill.h b/drivers/net/wireless/b43legacy/rfkill.h
index 11150a8032f..75585571c54 100644
--- a/drivers/net/wireless/b43legacy/rfkill.h
+++ b/drivers/net/wireless/b43legacy/rfkill.h
@@ -1,59 +1,11 @@
 #ifndef B43legacy_RFKILL_H_
 #define B43legacy_RFKILL_H_
 
+struct ieee80211_hw;
 struct b43legacy_wldev;
 
-#ifdef CONFIG_B43LEGACY_RFKILL
+void b43legacy_rfkill_poll(struct ieee80211_hw *hw);
 
-#include <linux/rfkill.h>
-#include <linux/workqueue.h>
-#include <linux/input-polldev.h>
-
-
-
-struct b43legacy_rfkill {
-	/* The RFKILL subsystem data structure */
-	struct rfkill *rfkill;
-	/* The poll device for the RFKILL input button */
-	struct input_polled_dev *poll_dev;
-	/* Did initialization succeed? Used for freeing. */
-	bool registered;
-	/* The unique name of this rfkill switch */
-	char name[sizeof("b43legacy-phy4294967295")];
-};
-
-/* The init function returns void, because we are not interested
- * in failing the b43 init process when rfkill init failed. */
-void b43legacy_rfkill_init(struct b43legacy_wldev *dev);
-void b43legacy_rfkill_exit(struct b43legacy_wldev *dev);
-
-char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev);
-
-
-#else /* CONFIG_B43LEGACY_RFKILL */
-/* No RFKILL support. */
-
-struct b43legacy_rfkill {
-	/* empty */
-};
-
-static inline void b43legacy_rfkill_alloc(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_free(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
-{
-}
-static inline void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
-{
-}
-static inline char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev)
-{
-	return NULL;
-}
-
-#endif /* CONFIG_B43LEGACY_RFKILL */
+bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev);
 
 #endif /* B43legacy_RFKILL_H_ */
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 12fca99f757..b8e39dd06e9 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -274,7 +274,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
 
 	/* PHY TX Control word */
 	if (rate_ofdm)
-		phy_ctl |= B43legacy_TX4_PHY_OFDM;
+		phy_ctl |= B43legacy_TX4_PHY_ENC_OFDM;
 	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
 		phy_ctl |= B43legacy_TX4_PHY_SHORTPRMBL;
 	switch (info->antenna_sel_tx) {
diff --git a/drivers/net/wireless/b43legacy/xmit.h b/drivers/net/wireless/b43legacy/xmit.h
index 62e09d02788..91633087a20 100644
--- a/drivers/net/wireless/b43legacy/xmit.h
+++ b/drivers/net/wireless/b43legacy/xmit.h
@@ -67,7 +67,9 @@ struct b43legacy_txhdr_fw3 {
 #define B43legacy_TX4_EFT_RTSFBOFDM	0x0010 /* RTS/CTS fallback rate type */
 
 /* PHY TX control word */
-#define B43legacy_TX4_PHY_OFDM		0x0001 /* Data frame rate type */
+#define B43legacy_TX4_PHY_ENC		0x0003 /* Data frame encoding */
+#define B43legacy_TX4_PHY_ENC_CCK	0x0000 /* CCK */
+#define B43legacy_TX4_PHY_ENC_OFDM	0x0001 /* Data frame rate type */
 #define B43legacy_TX4_PHY_SHORTPRMBL	0x0010 /* Use short preamble */
 #define B43legacy_TX4_PHY_ANT		0x03C0 /* Antenna selection */
 #define  B43legacy_TX4_PHY_ANT0		0x0000 /* Use antenna 0 */
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index 932d207bce2..c15db229351 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -29,7 +29,7 @@ config HOSTAP
 	PLX/PCI/CS version of the driver to actually use the driver.
 
 	The driver can be compiled as a module and it will be called
-	"hostap.ko".
+	hostap.
 
 config HOSTAP_FIRMWARE
 	bool "Support downloading firmware images with Host AP driver"
@@ -68,7 +68,7 @@ config HOSTAP_PLX
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_plx.ko".
+	hostap_plx.
 
 config HOSTAP_PCI
 	tristate "Host AP driver for Prism2.5 PCI adaptors"
@@ -81,7 +81,7 @@ config HOSTAP_PCI
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_pci.ko".
+	hostap_pci.
 
 config HOSTAP_CS
 	tristate "Host AP driver for Prism2/2.5/3 PC Cards"
@@ -94,4 +94,4 @@ config HOSTAP_CS
 	driver.
 
 	The driver can be compiled as a module and will be named
-	"hostap_cs.ko".
+	hostap_cs.
diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c
index 6693423f63f..d313b005114 100644
--- a/drivers/net/wireless/hostap/hostap_80211_tx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_tx.c
@@ -377,7 +377,7 @@ int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct hostap_interface *iface;
 	local_info_t *local;
-	int ret = 1;
+	int ret = NETDEV_TX_BUSY;
 	u16 fc;
 	struct hostap_tx_data tx;
 	ap_tx_ret tx_ret;
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 3dad1cf8f24..ff9b5c88218 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -1423,7 +1423,7 @@ static int prism2_hw_init2(struct net_device *dev, int initial)
 		prism2_check_sta_fw_version(local);
 
 		if (hfa384x_get_rid(dev, HFA384X_RID_CNFOWNMACADDR,
-				    &dev->dev_addr, 6, 1) < 0) {
+				    dev->dev_addr, 6, 1) < 0) {
 			printk("%s: could not get own MAC address\n",
 			       dev->name);
 		}
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index cbf15d70320..0e5d51086a4 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -435,7 +435,7 @@ static int prism2_plx_probe(struct pci_dev *pdev,
 	unsigned long pccard_attr_mem;
 	unsigned int pccard_attr_len;
 	void __iomem *attr_mem = NULL;
-	unsigned int cor_offset, cor_index;
+	unsigned int cor_offset = 0, cor_index = 0;
 	u32 reg;
 	local_info_t *local = NULL;
 	struct net_device *dev = NULL;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 97e5647ff05..742432388ca 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -3488,7 +3488,7 @@ static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
 			char *buf)
 {
-	struct ipw2100_priv *p = d->driver_data;
+	struct ipw2100_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->config);
 }
 
@@ -3497,7 +3497,7 @@ static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
 static ssize_t show_status(struct device *d, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ipw2100_priv *p = d->driver_data;
+	struct ipw2100_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->status);
 }
 
@@ -3506,7 +3506,7 @@ static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
 			       char *buf)
 {
-	struct ipw2100_priv *p = d->driver_data;
+	struct ipw2100_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->capability);
 }
 
@@ -4224,7 +4224,7 @@ static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
 	   1 - SW based RF kill active (sysfs)
 	   2 - HW based RF kill active
 	   3 - Both HW and SW baed RF kill active */
-	struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
+	struct ipw2100_priv *priv = dev_get_drvdata(d);
 	int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
 	    (rf_kill_active(priv) ? 0x2 : 0x0);
 	return sprintf(buf, "%i\n", val);
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index bd4dbcfe1bb..44c29b3f672 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -1527,7 +1527,7 @@ static DEVICE_ATTR(led, S_IWUSR | S_IRUGO, show_led, store_led);
 static ssize_t show_status(struct device *d,
 			   struct device_attribute *attr, char *buf)
 {
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->status);
 }
 
@@ -1536,7 +1536,7 @@ static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
 			char *buf)
 {
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 	return sprintf(buf, "0x%08x\n", (int)p->config);
 }
 
@@ -1545,7 +1545,7 @@ static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
 static ssize_t show_nic_type(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	return sprintf(buf, "TYPE: %d\n", priv->nic_type);
 }
 
@@ -1555,7 +1555,7 @@ static ssize_t show_ucode_version(struct device *d,
 				  struct device_attribute *attr, char *buf)
 {
 	u32 len = sizeof(u32), tmp = 0;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	if (ipw_get_ordinal(p, IPW_ORD_STAT_UCODE_VERSION, &tmp, &len))
 		return 0;
@@ -1569,7 +1569,7 @@ static ssize_t show_rtc(struct device *d, struct device_attribute *attr,
 			char *buf)
 {
 	u32 len = sizeof(u32), tmp = 0;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	if (ipw_get_ordinal(p, IPW_ORD_STAT_RTC, &tmp, &len))
 		return 0;
@@ -1586,14 +1586,15 @@ static DEVICE_ATTR(rtc, S_IWUSR | S_IRUGO, show_rtc, NULL);
 static ssize_t show_eeprom_delay(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
-	int n = ((struct ipw_priv *)d->driver_data)->eeprom_delay;
+	struct ipw_priv *p = dev_get_drvdata(d);
+	int n = p->eeprom_delay;
 	return sprintf(buf, "%i\n", n);
 }
 static ssize_t store_eeprom_delay(struct device *d,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 	sscanf(buf, "%i", &p->eeprom_delay);
 	return strnlen(buf, count);
 }
@@ -1605,7 +1606,7 @@ static ssize_t show_command_event_reg(struct device *d,
 				      struct device_attribute *attr, char *buf)
 {
 	u32 reg = 0;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	reg = ipw_read_reg32(p, IPW_INTERNAL_CMD_EVENT);
 	return sprintf(buf, "0x%08x\n", reg);
@@ -1615,7 +1616,7 @@ static ssize_t store_command_event_reg(struct device *d,
 				       const char *buf, size_t count)
 {
 	u32 reg;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &reg);
 	ipw_write_reg32(p, IPW_INTERNAL_CMD_EVENT, reg);
@@ -1629,7 +1630,7 @@ static ssize_t show_mem_gpio_reg(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
 	u32 reg = 0;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	reg = ipw_read_reg32(p, 0x301100);
 	return sprintf(buf, "0x%08x\n", reg);
@@ -1639,7 +1640,7 @@ static ssize_t store_mem_gpio_reg(struct device *d,
 				  const char *buf, size_t count)
 {
 	u32 reg;
-	struct ipw_priv *p = d->driver_data;
+	struct ipw_priv *p = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &reg);
 	ipw_write_reg32(p, 0x301100, reg);
@@ -1653,7 +1654,7 @@ static ssize_t show_indirect_dword(struct device *d,
 				   struct device_attribute *attr, char *buf)
 {
 	u32 reg = 0;
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	if (priv->status & STATUS_INDIRECT_DWORD)
 		reg = ipw_read_reg32(priv, priv->indirect_dword);
@@ -1666,7 +1667,7 @@ static ssize_t store_indirect_dword(struct device *d,
 				    struct device_attribute *attr,
 				    const char *buf, size_t count)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &priv->indirect_dword);
 	priv->status |= STATUS_INDIRECT_DWORD;
@@ -1680,7 +1681,7 @@ static ssize_t show_indirect_byte(struct device *d,
 				  struct device_attribute *attr, char *buf)
 {
 	u8 reg = 0;
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	if (priv->status & STATUS_INDIRECT_BYTE)
 		reg = ipw_read_reg8(priv, priv->indirect_byte);
@@ -1693,7 +1694,7 @@ static ssize_t store_indirect_byte(struct device *d,
 				   struct device_attribute *attr,
 				   const char *buf, size_t count)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &priv->indirect_byte);
 	priv->status |= STATUS_INDIRECT_BYTE;
@@ -1707,7 +1708,7 @@ static ssize_t show_direct_dword(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
 	u32 reg = 0;
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	if (priv->status & STATUS_DIRECT_DWORD)
 		reg = ipw_read32(priv, priv->direct_dword);
@@ -1720,7 +1721,7 @@ static ssize_t store_direct_dword(struct device *d,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	sscanf(buf, "%x", &priv->direct_dword);
 	priv->status |= STATUS_DIRECT_DWORD;
@@ -1747,7 +1748,7 @@ static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
 	   1 - SW based RF kill active (sysfs)
 	   2 - HW based RF kill active
 	   3 - Both HW and SW baed RF kill active */
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
 	    (rf_kill_active(priv) ? 0x2 : 0x0);
 	return sprintf(buf, "%i\n", val);
@@ -1791,7 +1792,7 @@ static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio)
 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
-	struct ipw_priv *priv = d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 
 	ipw_radio_kill_sw(priv, buf[0] == '1');
 
@@ -1803,7 +1804,7 @@ static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
 static ssize_t show_speed_scan(struct device *d, struct device_attribute *attr,
 			       char *buf)
 {
-	struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	int pos = 0, len = 0;
 	if (priv->config & CFG_SPEED_SCAN) {
 		while (priv->speed_scan[pos] != 0)
@@ -1818,7 +1819,7 @@ static ssize_t show_speed_scan(struct device *d, struct device_attribute *attr,
 static ssize_t store_speed_scan(struct device *d, struct device_attribute *attr,
 				const char *buf, size_t count)
 {
-	struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	int channel, pos = 0;
 	const char *p = buf;
 
@@ -1857,14 +1858,14 @@ static DEVICE_ATTR(speed_scan, S_IWUSR | S_IRUGO, show_speed_scan,
 static ssize_t show_net_stats(struct device *d, struct device_attribute *attr,
 			      char *buf)
 {
-	struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	return sprintf(buf, "%c\n", (priv->config & CFG_NET_STATS) ? '1' : '0');
 }
 
 static ssize_t store_net_stats(struct device *d, struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+	struct ipw_priv *priv = dev_get_drvdata(d);
 	if (buf[0] == '1')
 		priv->config |= CFG_NET_STATS;
 	else
@@ -3176,11 +3177,8 @@ static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
 	/* Start the Dma */
 	rc = ipw_fw_dma_enable(priv);
 
-	if (priv->sram_desc.last_cb_index > 0) {
-		/* the DMA is already ready this would be a bug. */
-		BUG();
-		goto out;
-	}
+	/* the DMA is already ready this would be a bug. */
+	BUG_ON(priv->sram_desc.last_cb_index > 0);
 
 	do {
 		chunk = (struct fw_chunk *)(data + offset);
@@ -11526,7 +11524,8 @@ static int ipw_prom_stop(struct net_device *dev)
 static int ipw_prom_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	IPW_DEBUG_INFO("prom dev->xmit\n");
-	return -EOPNOTSUPP;
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
 }
 
 static const struct net_device_ops ipw_prom_netdev_ops = {
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 92a26922e79..8ce6e961c5d 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -154,10 +154,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 		goto failed;
 	}
 	ieee = netdev_priv(dev);
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->hard_start_xmit = ieee80211_xmit;
-	dev->change_mtu = ieee80211_change_mtu;
-#endif
 
 	ieee->dev = dev;
 
diff --git a/drivers/net/wireless/ipw2x00/libipw_tx.c b/drivers/net/wireless/ipw2x00/libipw_tx.c
index 65a8195b3d9..da2ad5437ce 100644
--- a/drivers/net/wireless/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_tx.c
@@ -539,7 +539,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&ieee->lock, flags);
 	netif_stop_queue(dev);
 	dev->stats.tx_errors++;
-	return 1;
+	return NETDEV_TX_BUSY;
 }
 EXPORT_SYMBOL(ieee80211_xmit);
 
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 8304f6406a1..e092af09d6b 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -5,16 +5,11 @@ config IWLWIFI
 	select FW_LOADER
 	select MAC80211_LEDS if IWLWIFI_LEDS
 	select LEDS_CLASS if IWLWIFI_LEDS
-	select RFKILL if IWLWIFI_RFKILL
 
 config IWLWIFI_LEDS
 	bool "Enable LED support in iwlagn and iwl3945 drivers"
 	depends on IWLWIFI
 
-config IWLWIFI_RFKILL
-	bool "Enable RF kill support in iwlagn and iwl3945 drivers"
-	depends on IWLWIFI
-
 config IWLWIFI_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwlagn driver"
 	depends on IWLWIFI
@@ -75,7 +70,7 @@ config IWLAGN
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwlagn.ko.
+	  module will be called iwlagn.
 
 
 config IWL4965
@@ -113,7 +108,7 @@ config IWL3945
 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl3945.ko.
+	  module will be called iwl3945.
 
 config IWL3945_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwl3945 driver"
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index d79d97ad61a..1d4e0a226fd 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -4,7 +4,6 @@ iwlcore-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o
 iwlcore-objs 		+= iwl-scan.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
-iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o
 iwlcore-$(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) += iwl-spectrum.o
 
 obj-$(CONFIG_IWLAGN)	+= iwlagn.o
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index ac22f59be9e..225e5f88934 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -44,6 +44,15 @@
 #include "iwl-core.h"
 #include "iwl-dev.h"
 
+#ifdef CONFIG_IWLWIFI_DEBUG
+static const char *led_type_str[] = {
+	__stringify(IWL_LED_TRG_TX),
+	__stringify(IWL_LED_TRG_RX),
+	__stringify(IWL_LED_TRG_ASSOC),
+	__stringify(IWL_LED_TRG_RADIO),
+	NULL
+};
+#endif /* CONFIG_IWLWIFI_DEBUG */
 
 static const struct {
 	u16 brightness;
@@ -61,7 +70,7 @@ static const struct {
 	{10, 110, 110},
 	{5, 130, 130},
 	{0, 167, 167},
-	/*SOLID_ON*/
+	/* SOLID_ON */
 	{-1, IWL_LED_SOLID, 0}
 };
 
@@ -143,6 +152,26 @@ static int iwl3945_led_off(struct iwl_priv *priv, int led_id)
 }
 
 /*
+ *  Set led on in case of association
+ *  */
+static int iwl3945_led_associate(struct iwl_priv *priv, int led_id)
+{
+	IWL_DEBUG_LED(priv, "Associated\n");
+
+	priv->allow_blinking = 1;
+	return iwl3945_led_on(priv, led_id);
+}
+/* Set Led off in case of disassociation */
+static int iwl3945_led_disassociate(struct iwl_priv *priv, int led_id)
+{
+	IWL_DEBUG_LED(priv, "Disassociated\n");
+
+	priv->allow_blinking = 0;
+
+	return 0;
+}
+
+/*
  * brightness call back function for Tx/Rx LED
  */
 static int iwl3945_led_associated(struct iwl_priv *priv, int led_id)
@@ -165,26 +194,21 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev,
 				enum led_brightness brightness)
 {
 	struct iwl_led *led = container_of(led_cdev,
-					       struct iwl_led, led_dev);
+					   struct iwl_led, led_dev);
 	struct iwl_priv *priv = led->priv;
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
+	IWL_DEBUG_LED(priv, "Led type = %s brightness = %d\n",
+			led_type_str[led->type], brightness);
+
 	switch (brightness) {
 	case LED_FULL:
-		if (led->type == IWL_LED_TRG_ASSOC) {
-			priv->allow_blinking = 1;
-			IWL_DEBUG_LED(priv, "MAC is  associated\n");
-		}
 		if (led->led_on)
 			led->led_on(priv, IWL_LED_LINK);
 		break;
 	case LED_OFF:
-		if (led->type == IWL_LED_TRG_ASSOC) {
-			priv->allow_blinking = 0;
-			IWL_DEBUG_LED(priv, "MAC is disassociated\n");
-		}
 		if (led->led_off)
 			led->led_off(priv, IWL_LED_LINK);
 		break;
@@ -197,8 +221,6 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev,
 	}
 }
 
-
-
 /*
  * Register led class with the system
  */
@@ -237,12 +259,12 @@ static int iwl3945_led_register_led(struct iwl_priv *priv,
 static inline u8 get_blink_rate(struct iwl_priv *priv)
 {
 	int index;
-	u64 current_tpt = priv->rxtxpackets;
-	s64 tpt = current_tpt - priv->led_tpt;
+	s64 tpt = priv->rxtxpackets;
 
 	if (tpt < 0)
 		tpt = -tpt;
-	priv->led_tpt = current_tpt;
+
+	IWL_DEBUG_LED(priv, "tpt %lld \n", (long long)tpt);
 
 	if (!priv->allow_blinking)
 		index = IWL_MAX_BLINK_TBL;
@@ -250,13 +272,9 @@ static inline u8 get_blink_rate(struct iwl_priv *priv)
 		for (index = 0; index < IWL_MAX_BLINK_TBL; index++)
 			if (tpt > (blink_tbl[index].brightness * IWL_1MB_RATE))
 				break;
-	return index;
-}
 
-static inline int is_rf_kill(struct iwl_priv *priv)
-{
-	return test_bit(STATUS_RF_KILL_HW, &priv->status) ||
-		test_bit(STATUS_RF_KILL_SW, &priv->status);
+	IWL_DEBUG_LED(priv, "LED BLINK IDX=%d\n", index);
+	return index;
 }
 
 /*
@@ -272,7 +290,7 @@ void iwl3945_led_background(struct iwl_priv *priv)
 		priv->last_blink_time = 0;
 		return;
 	}
-	if (is_rf_kill(priv)) {
+	if (iwl_is_rfkill(priv)) {
 		priv->last_blink_time = 0;
 		return;
 	}
@@ -341,8 +359,8 @@ int iwl3945_led_register(struct iwl_priv *priv)
 				   IWL_LED_TRG_ASSOC, 0, trigger);
 
 	/* for assoc always turn led on */
-	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_on;
-	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_on;
+	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_associate;
+	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_disassociate;
 	priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL;
 
 	if (ret)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index af6b9d44477..5eb538d18a8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -38,6 +38,7 @@
 
 #include "iwl-commands.h"
 #include "iwl-3945.h"
+#include "iwl-sta.h"
 
 #define RS_NAME "iwl-3945-rs"
 
@@ -683,11 +684,10 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 	if (sta)
 		rate_mask = sta->supp_rates[sband->band];
 
-	/* Send management frames and broadcast/multicast data using lowest
-	 * rate. */
+	/* Send management frames and NO_ACK data using lowest rate. */
 	fc = le16_to_cpu(hdr->frame_control);
 	if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
-	    is_multicast_ether_addr(hdr->addr1) ||
+	    info->flags & IEEE80211_TX_CTL_NO_ACK ||
 	    !sta || !priv_sta) {
 		IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
 		if (!rate_mask)
@@ -696,6 +696,8 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 		else
 			info->control.rates[0].idx =
 					rate_lowest_index(sband, sta);
+		if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+			info->control.rates[0].count = 1;
 		return;
 	}
 
@@ -713,13 +715,13 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 
 	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
 	    !rs_sta->ibss_sta_added) {
-		u8 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
+		u8 sta_id = iwl_find_station(priv, hdr->addr1);
 
 		if (sta_id == IWL_INVALID_STATION) {
 			IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n",
 				       hdr->addr1);
-			sta_id = iwl3945_add_station(priv,
-				    hdr->addr1, 0, CMD_ASYNC);
+			sta_id = iwl_add_station(priv, hdr->addr1, false,
+				CMD_ASYNC, NULL);
 		}
 		if (sta_id != IWL_INVALID_STATION)
 			rs_sta->ibss_sta_added = 1;
@@ -974,7 +976,7 @@ void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
 
 	rcu_read_lock();
 
-	sta = ieee80211_find_sta(hw, priv->stations_39[sta_id].sta.sta.addr);
+	sta = ieee80211_find_sta(hw, priv->stations[sta_id].sta.sta.addr);
 	if (!sta) {
 		rcu_read_unlock();
 		return;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 527525cc091..46288e72488 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -98,7 +98,6 @@ const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = {
  *   ... and set IWL_EVT_DISABLE to 1. */
 void iwl3945_disable_events(struct iwl_priv *priv)
 {
-	int ret;
 	int i;
 	u32 base;		/* SRAM address of event log header */
 	u32 disable_ptr;	/* SRAM address of event-disable bitmap array */
@@ -159,26 +158,17 @@ void iwl3945_disable_events(struct iwl_priv *priv)
 		return;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
-
 	disable_ptr = iwl_read_targ_mem(priv, base + (4 * sizeof(u32)));
 	array_size = iwl_read_targ_mem(priv, base + (5 * sizeof(u32)));
-	iwl_release_nic_access(priv);
 
 	if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
 		IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
 			       disable_ptr);
-		ret = iwl_grab_nic_access(priv);
 		for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
 			iwl_write_targ_mem(priv,
 					   disable_ptr + (i * sizeof(u32)),
 					   evt_disable[i]);
 
-		iwl_release_nic_access(priv);
 	} else {
 		IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
 		IWL_DEBUG_INFO(priv, "  by writing \"1\"s into disable bitmap\n");
@@ -779,35 +769,6 @@ void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 	return ;
 }
 
-u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *addr)
-{
-	int i, start = IWL_AP_ID;
-	int ret = IWL_INVALID_STATION;
-	unsigned long flags;
-
-	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) ||
-	    (priv->iw_mode == NL80211_IFTYPE_AP))
-		start = IWL_STA_ID;
-
-	if (is_broadcast_ether_addr(addr))
-		return priv->hw_params.bcast_sta_id;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-	for (i = start; i < priv->hw_params.max_stations; i++)
-		if ((priv->stations_39[i].used) &&
-		    (!compare_ether_addr
-		     (priv->stations_39[i].sta.sta.addr, addr))) {
-			ret = i;
-			goto out;
-		}
-
-	IWL_DEBUG_INFO(priv, "can not find STA %pM (total %d)\n",
-		       addr, priv->num_stations);
- out:
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-	return ret;
-}
-
 /**
  * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
  *
@@ -885,13 +846,13 @@ void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv, struct iwl_cmd *cmd,
 u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
 {
 	unsigned long flags_spin;
-	struct iwl3945_station_entry *station;
+	struct iwl_station_entry *station;
 
 	if (sta_id == IWL_INVALID_STATION)
 		return IWL_INVALID_STATION;
 
 	spin_lock_irqsave(&priv->sta_lock, flags_spin);
-	station = &priv->stations_39[sta_id];
+	station = &priv->stations[sta_id];
 
 	station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
 	station->sta.rate_n_flags = cpu_to_le16(tx_rate);
@@ -899,8 +860,7 @@ u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
 
-	iwl_send_add_sta(priv,
-			 (struct iwl_addsta_cmd *)&station->sta, flags);
+	iwl_send_add_sta(priv, &station->sta, flags);
 	IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
 			sta_id, tx_rate);
 	return sta_id;
@@ -908,55 +868,30 @@ u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
 
 static int iwl3945_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 {
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	if (src == IWL_PWR_SRC_VAUX) {
 		if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) {
 			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 					APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 					~APMG_PS_CTRL_MSK_PWR_SRC);
-			iwl_release_nic_access(priv);
 
 			iwl_poll_bit(priv, CSR_GPIO_IN,
 				     CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
 				     CSR_GPIO_IN_BIT_AUX_POWER, 5000);
-		} else {
-			iwl_release_nic_access(priv);
 		}
 	} else {
 		iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 				APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 				~APMG_PS_CTRL_MSK_PWR_SRC);
 
-		iwl_release_nic_access(priv);
 		iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
 			     CSR_GPIO_IN_BIT_AUX_POWER, 5000);	/* uS */
 	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return ret;
+	return 0;
 }
 
 static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 {
-	int rc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
-
 	iwl_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->dma_addr);
 	iwl_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
 	iwl_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
@@ -973,23 +908,11 @@ static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 	/* fake read to flush all prev I/O */
 	iwl_read_direct32(priv, FH39_RSSR_CTRL);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 
 static int iwl3945_tx_reset(struct iwl_priv *priv)
 {
-	int rc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
 
 	/* bypass mode */
 	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
@@ -1017,8 +940,6 @@ static int iwl3945_tx_reset(struct iwl_priv *priv)
 		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
 		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
@@ -1061,7 +982,7 @@ static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
 
 static int iwl3945_apm_init(struct iwl_priv *priv)
 {
-	int ret = 0;
+	int ret;
 
 	iwl_power_initialize(priv);
 
@@ -1083,10 +1004,6 @@ static int iwl3945_apm_init(struct iwl_priv *priv)
 		goto out;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto out;
-
 	/* enable DMA */
 	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
 						APMG_CLK_VAL_BSM_CLK_RQT);
@@ -1097,7 +1014,6 @@ static int iwl3945_apm_init(struct iwl_priv *priv)
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	iwl_release_nic_access(priv);
 out:
 	return ret;
 }
@@ -1110,6 +1026,11 @@ static void iwl3945_nic_config(struct iwl_priv *priv)
 
 	spin_lock_irqsave(&priv->lock, flags);
 
+	/* Determine HW type */
+	pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
+
+	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
+
 	if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
 		IWL_DEBUG_INFO(priv, "RTP type \n");
 	else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
@@ -1163,7 +1084,6 @@ static void iwl3945_nic_config(struct iwl_priv *priv)
 
 int iwl3945_hw_nic_init(struct iwl_priv *priv)
 {
-	u8 rev_id;
 	int rc;
 	unsigned long flags;
 	struct iwl_rx_queue *rxq = &priv->rxq;
@@ -1172,12 +1092,6 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv)
 	priv->cfg->ops->lib->apm_ops.init(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* Determine HW type */
-	rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
-	if (rc)
-		return rc;
-	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
-
 	rc = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
 	if (rc)
 		return rc;
@@ -1198,22 +1112,13 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv)
 
 	iwl3945_rx_init(priv, rxq);
 
-	spin_lock_irqsave(&priv->lock, flags);
 
 	/* Look at using this instead:
 	rxq->need_update = 1;
 	iwl_rx_queue_update_write_ptr(priv, rxq);
 	*/
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
 	iwl_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
-	iwl_release_nic_access(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	rc = iwl3945_txq_ctx_reset(priv);
 	if (rc)
@@ -1245,14 +1150,6 @@ void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
 void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
 {
 	int txq_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (iwl_grab_nic_access(priv)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		iwl3945_hw_txq_ctx_free(priv);
-		return;
-	}
 
 	/* stop SCD */
 	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
@@ -1265,9 +1162,6 @@ void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
 				1000);
 	}
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	iwl3945_hw_txq_ctx_free(priv);
 }
 
@@ -1312,12 +1206,8 @@ static void iwl3945_apm_stop(struct iwl_priv *priv)
 
 static int iwl3945_apm_reset(struct iwl_priv *priv)
 {
-	int rc;
-	unsigned long flags;
-
 	iwl3945_apm_stop_master(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
 
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 	udelay(10);
@@ -1327,36 +1217,31 @@ static int iwl3945_apm_reset(struct iwl_priv *priv)
 	iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
 			 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 
-	rc = iwl_grab_nic_access(priv);
-	if (!rc) {
-		iwl_write_prph(priv, APMG_CLK_CTRL_REG,
-					 APMG_CLK_VAL_BSM_CLK_RQT);
+	iwl_write_prph(priv, APMG_CLK_CTRL_REG,
+				APMG_CLK_VAL_BSM_CLK_RQT);
 
-		iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
-		iwl_write_prph(priv, APMG_RTC_INT_STT_REG,
+	iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
+	iwl_write_prph(priv, APMG_RTC_INT_STT_REG,
 					0xFFFFFFFF);
 
-		/* enable DMA */
-		iwl_write_prph(priv, APMG_CLK_EN_REG,
-					 APMG_CLK_VAL_DMA_CLK_RQT |
-					 APMG_CLK_VAL_BSM_CLK_RQT);
-		udelay(10);
+	/* enable DMA */
+	iwl_write_prph(priv, APMG_CLK_EN_REG,
+				APMG_CLK_VAL_DMA_CLK_RQT |
+				APMG_CLK_VAL_BSM_CLK_RQT);
+	udelay(10);
 
-		iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
+	iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
 				APMG_PS_CTRL_VAL_RESET_REQ);
-		udelay(5);
-		iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
+	udelay(5);
+	iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
 				APMG_PS_CTRL_VAL_RESET_REQ);
-		iwl_release_nic_access(priv);
-	}
 
 	/* Clear the 'host command active' bit... */
 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 
 	wake_up_interruptible(&priv->wait_command_queue);
-	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return rc;
+	return 0;
 }
 
 /**
@@ -1964,6 +1849,193 @@ int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
 	return 0;
 }
 
+static int iwl3945_send_rxon_assoc(struct iwl_priv *priv)
+{
+	int rc = 0;
+	struct iwl_rx_packet *res = NULL;
+	struct iwl3945_rxon_assoc_cmd rxon_assoc;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_RXON_ASSOC,
+		.len = sizeof(rxon_assoc),
+		.meta.flags = CMD_WANT_SKB,
+		.data = &rxon_assoc,
+	};
+	const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
+	const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
+
+	if ((rxon1->flags == rxon2->flags) &&
+	    (rxon1->filter_flags == rxon2->filter_flags) &&
+	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
+	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
+		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
+		return 0;
+	}
+
+	rxon_assoc.flags = priv->staging_rxon.flags;
+	rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
+	rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
+	rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
+	rxon_assoc.reserved = 0;
+
+	rc = iwl_send_cmd_sync(priv, &cmd);
+	if (rc)
+		return rc;
+
+	res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+		IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
+		rc = -EIO;
+	}
+
+	priv->alloc_rxb_skb--;
+	dev_kfree_skb_any(cmd.meta.u.skb);
+
+	return rc;
+}
+
+/**
+ * iwl3945_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data.  This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ */
+static int iwl3945_commit_rxon(struct iwl_priv *priv)
+{
+	/* cast away the const for active_rxon in this function */
+	struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
+	struct iwl3945_rxon_cmd *staging_rxon = (void *)&priv->staging_rxon;
+	int rc = 0;
+	bool new_assoc =
+		!!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
+
+	if (!iwl_is_alive(priv))
+		return -1;
+
+	/* always get timestamp with Rx frame */
+	staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
+
+	/* select antenna */
+	staging_rxon->flags &=
+	    ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
+	staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
+
+	rc = iwl_check_rxon_cmd(priv);
+	if (rc) {
+		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
+		return -EINVAL;
+	}
+
+	/* If we don't need to send a full RXON, we can use
+	 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
+	 * and other flags for the current radio configuration. */
+	if (!iwl_full_rxon_required(priv)) {
+		rc = iwl_send_rxon_assoc(priv);
+		if (rc) {
+			IWL_ERR(priv, "Error setting RXON_ASSOC "
+				  "configuration (%d).\n", rc);
+			return rc;
+		}
+
+		memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
+
+		return 0;
+	}
+
+	/* If we are currently associated and the new config requires
+	 * an RXON_ASSOC and the new config wants the associated mask enabled,
+	 * we must clear the associated from the active configuration
+	 * before we apply the new config */
+	if (iwl_is_associated(priv) && new_assoc) {
+		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+		/*
+		 * reserved4 and 5 could have been filled by the iwlcore code.
+		 * Let's clear them before pushing to the 3945.
+		 */
+		active_rxon->reserved4 = 0;
+		active_rxon->reserved5 = 0;
+		rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
+				      sizeof(struct iwl3945_rxon_cmd),
+				      &priv->active_rxon);
+
+		/* If the mask clearing failed then we set
+		 * active_rxon back to what it was previously */
+		if (rc) {
+			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
+			IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
+				  "configuration (%d).\n", rc);
+			return rc;
+		}
+	}
+
+	IWL_DEBUG_INFO(priv, "Sending RXON\n"
+		       "* with%s RXON_FILTER_ASSOC_MSK\n"
+		       "* channel = %d\n"
+		       "* bssid = %pM\n",
+		       (new_assoc ? "" : "out"),
+		       le16_to_cpu(staging_rxon->channel),
+		       staging_rxon->bssid_addr);
+
+	/*
+	 * reserved4 and 5 could have been filled by the iwlcore code.
+	 * Let's clear them before pushing to the 3945.
+	 */
+	staging_rxon->reserved4 = 0;
+	staging_rxon->reserved5 = 0;
+
+	iwl_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
+
+	/* Apply the new configuration */
+	rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
+			      sizeof(struct iwl3945_rxon_cmd),
+			      staging_rxon);
+	if (rc) {
+		IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
+		return rc;
+	}
+
+	memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
+
+	iwl_clear_stations_table(priv);
+
+	/* If we issue a new RXON command which required a tune then we must
+	 * send a new TXPOWER command or we won't be able to Tx any frames */
+	rc = priv->cfg->ops->lib->send_tx_power(priv);
+	if (rc) {
+		IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
+		return rc;
+	}
+
+	/* Add the broadcast address so we can send broadcast frames */
+	if (iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL) ==
+	    IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n");
+		return -EIO;
+	}
+
+	/* If we have set the ASSOC_MSK and we are in BSS mode then
+	 * add the IWL_AP_ID to the station rate table */
+	if (iwl_is_associated(priv) &&
+	    (priv->iw_mode == NL80211_IFTYPE_STATION))
+		if (iwl_add_station(priv, priv->active_rxon.bssid_addr,
+				true, CMD_SYNC, NULL) == IWL_INVALID_STATION) {
+			IWL_ERR(priv, "Error adding AP address for transmit\n");
+			return -EIO;
+		}
+
+	/* Init the hardware's rate fallback order based on the band */
+	rc = iwl3945_init_hw_rate_table(priv);
+	if (rc) {
+		IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /* will add 3945 channel switch cmd handling later */
 int iwl3945_hw_channel_switch(struct iwl_priv *priv, u16 channel)
 {
@@ -2314,14 +2386,6 @@ int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
 int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
 {
 	int rc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
 
 	iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
 	rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS,
@@ -2329,28 +2393,17 @@ int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
 	if (rc < 0)
 		IWL_ERR(priv, "Can't stop Rx DMA.\n");
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 
 int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 {
-	int rc;
-	unsigned long flags;
 	int txq_id = txq->q.id;
 
 	struct iwl3945_shared *shared_data = priv->shared_virt;
 
 	shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
 	iwl_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
 	iwl_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
 
@@ -2360,11 +2413,9 @@ int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 		FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
 		FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
 		FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
-	iwl_release_nic_access(priv);
 
 	/* fake read to flush all prev. writes */
 	iwl_read32(priv, FH39_TSSR_CBB_BASE);
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
@@ -2384,13 +2435,25 @@ static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len)
 	}
 }
 
+
 static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
 {
-	u16 size = (u16)sizeof(struct iwl3945_addsta_cmd);
-	memcpy(data, cmd, size);
-	return size;
+	struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data;
+	addsta->mode = cmd->mode;
+	memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
+	memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
+	addsta->station_flags = cmd->station_flags;
+	addsta->station_flags_msk = cmd->station_flags_msk;
+	addsta->tid_disable_tx = cpu_to_le16(0);
+	addsta->rate_n_flags = cmd->rate_n_flags;
+	addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
+	addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
+	addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
+
+	return (u16)sizeof(struct iwl3945_addsta_cmd);
 }
 
+
 /**
  * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
  */
@@ -2672,10 +2735,6 @@ static int iwl3945_load_bsm(struct iwl_priv *priv)
 	inst_len = priv->ucode_init.len;
 	data_len = priv->ucode_init_data.len;
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc)
-		return rc;
-
 	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
@@ -2689,10 +2748,8 @@ static int iwl3945_load_bsm(struct iwl_priv *priv)
 					  le32_to_cpu(*image));
 
 	rc = iwl3945_verify_bsm(priv);
-	if (rc) {
-		iwl_release_nic_access(priv);
+	if (rc)
 		return rc;
-	}
 
 	/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
 	iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
@@ -2724,11 +2781,14 @@ static int iwl3945_load_bsm(struct iwl_priv *priv)
 	iwl_write_prph(priv, BSM_WR_CTRL_REG,
 		BSM_WR_CTRL_REG_BIT_START_EN);
 
-	iwl_release_nic_access(priv);
-
 	return 0;
 }
 
+static struct iwl_hcmd_ops iwl3945_hcmd = {
+	.rxon_assoc = iwl3945_send_rxon_assoc,
+	.commit_rxon = iwl3945_commit_rxon,
+};
+
 static struct iwl_lib_ops iwl3945_lib = {
 	.txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
 	.txq_free_tfd = iwl3945_hw_txq_free_tfd,
@@ -2758,6 +2818,9 @@ static struct iwl_lib_ops iwl3945_lib = {
 	},
 	.send_tx_power	= iwl3945_send_tx_power,
 	.is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
+	.post_associate = iwl3945_post_associate,
+	.isr = iwl_isr_legacy,
+	.config_ap = iwl3945_config_ap,
 };
 
 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
@@ -2767,6 +2830,7 @@ static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
 
 static struct iwl_ops iwl3945_ops = {
 	.lib = &iwl3945_lib,
+	.hcmd = &iwl3945_hcmd,
 	.utils = &iwl3945_hcmd_utils,
 };
 
@@ -2779,7 +2843,8 @@ static struct iwl_cfg iwl3945_bg_cfg = {
 	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
 	.ops = &iwl3945_ops,
-	.mod_params = &iwl3945_mod_params
+	.mod_params = &iwl3945_mod_params,
+	.use_isr_legacy = true
 };
 
 static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2791,7 +2856,8 @@ static struct iwl_cfg iwl3945_abg_cfg = {
 	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
 	.ops = &iwl3945_ops,
-	.mod_params = &iwl3945_mod_params
+	.mod_params = &iwl3945_mod_params,
+	.use_isr_legacy = true
 };
 
 struct pci_device_id iwl3945_hw_card_ids[] = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 55188844657..fbb3a573463 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -36,10 +36,6 @@
 #include <linux/kernel.h>
 #include <net/ieee80211_radiotap.h>
 
-/*used for rfkill*/
-#include <linux/rfkill.h>
-#include <linux/input.h>
-
 /* Hardware specific file defines the PCI IDs table for that hardware module */
 extern struct pci_device_id iwl3945_hw_card_ids[];
 
@@ -155,14 +151,12 @@ struct iwl3945_frame {
 #define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
 #define STATUS_INT_ENABLED	2
 #define STATUS_RF_KILL_HW	3
-#define STATUS_RF_KILL_SW	4
 #define STATUS_INIT		5
 #define STATUS_ALIVE		6
 #define STATUS_READY		7
 #define STATUS_TEMPERATURE	8
 #define STATUS_GEO_CONFIGURED	9
 #define STATUS_EXIT_PENDING	10
-#define STATUS_IN_SUSPEND	11
 #define STATUS_STATISTICS	12
 #define STATUS_SCANNING		13
 #define STATUS_SCAN_ABORTING	14
@@ -203,11 +197,6 @@ struct iwl3945_ibss_seq {
  * for use by iwl-*.c
  *
  *****************************************************************************/
-struct iwl3945_addsta_cmd;
-extern int iwl3945_send_add_station(struct iwl_priv *priv,
-				struct iwl3945_addsta_cmd *sta, u8 flags);
-extern u8 iwl3945_add_station(struct iwl_priv *priv, const u8 *bssid,
-			  int is_ap, u8 flags);
 extern int iwl3945_power_init_handle(struct iwl_priv *priv);
 extern int iwl3945_eeprom_init(struct iwl_priv *priv);
 extern int iwl3945_calc_db_from_ratio(int sig_ratio);
@@ -278,6 +267,8 @@ extern void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
 				 struct iwl_rx_mem_buffer *rxb);
 extern void iwl3945_disable_events(struct iwl_priv *priv);
 extern int iwl4965_get_temperature(const struct iwl_priv *priv);
+extern void iwl3945_post_associate(struct iwl_priv *priv);
+extern void iwl3945_config_ap(struct iwl_priv *priv);
 
 /**
  * iwl3945_hw_find_station - Find station id for a given BSSID
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 847a6220c5e..8f3d4bc6a03 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -163,10 +163,6 @@ static int iwl4965_load_bsm(struct iwl_priv *priv)
 	inst_len = priv->ucode_init.len;
 	data_len = priv->ucode_init_data.len;
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
@@ -179,10 +175,8 @@ static int iwl4965_load_bsm(struct iwl_priv *priv)
 		_iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
 
 	ret = iwl4965_verify_bsm(priv);
-	if (ret) {
-		iwl_release_nic_access(priv);
+	if (ret)
 		return ret;
-	}
 
 	/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
 	iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
@@ -211,7 +205,6 @@ static int iwl4965_load_bsm(struct iwl_priv *priv)
 	 *   (e.g. when powering back up after power-save shutdown) */
 	iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
 
-	iwl_release_nic_access(priv);
 
 	return 0;
 }
@@ -229,20 +222,12 @@ static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
 {
 	dma_addr_t pinst;
 	dma_addr_t pdata;
-	unsigned long flags;
 	int ret = 0;
 
 	/* bits 35:4 for 4965 */
 	pinst = priv->ucode_code.p_addr >> 4;
 	pdata = priv->ucode_data_backup.p_addr >> 4;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	/* Tell bootstrap uCode where to find image to load */
 	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
@@ -253,10 +238,6 @@ static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
 	 *   that all new ptr/size info is in place */
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
 				 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
-	iwl_release_nic_access(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
 
 	return ret;
@@ -312,10 +293,12 @@ restart:
 	queue_work(priv->workqueue, &priv->restart);
 }
 
-static int is_fat_channel(__le32 rxon_flags)
+static bool is_fat_channel(__le32 rxon_flags)
 {
-	return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) ||
-		(rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK);
+	int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
+				    >> RXON_FLG_CHANNEL_MODE_POS;
+	return ((chan_mod == CHANNEL_MODE_PURE_40) ||
+		  (chan_mod == CHANNEL_MODE_MIXED));
 }
 
 /*
@@ -358,10 +341,6 @@ static int iwl4965_apm_init(struct iwl_priv *priv)
 		goto out;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto out;
-
 	/* enable DMA */
 	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
 						APMG_CLK_VAL_BSM_CLK_RQT);
@@ -372,7 +351,6 @@ static int iwl4965_apm_init(struct iwl_priv *priv)
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	iwl_release_nic_access(priv);
 out:
 	return ret;
 }
@@ -454,11 +432,9 @@ static void iwl4965_apm_stop(struct iwl_priv *priv)
 static int iwl4965_apm_reset(struct iwl_priv *priv)
 {
 	int ret = 0;
-	unsigned long flags;
 
 	iwl4965_apm_stop_master(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
 
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
@@ -475,9 +451,6 @@ static int iwl4965_apm_reset(struct iwl_priv *priv)
 
 	udelay(10);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto out;
 	/* Enable DMA and BSM Clock */
 	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT |
 					      APMG_CLK_VAL_BSM_CLK_RQT);
@@ -488,14 +461,10 @@ static int iwl4965_apm_reset(struct iwl_priv *priv)
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	iwl_release_nic_access(priv);
-
 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
 out:
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return ret;
 }
 
@@ -681,18 +650,11 @@ static int iwl4965_alive_notify(struct iwl_priv *priv)
 {
 	u32 a;
 	unsigned long flags;
-	int ret;
 	int i, chan;
 	u32 reg_val;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	/* Clear 4965's internal Tx Scheduler data base */
 	priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
 	a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
@@ -759,10 +721,9 @@ static int iwl4965_alive_notify(struct iwl_priv *priv)
 		iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
 	}
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return ret;
+	return 0;
 }
 
 static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
@@ -788,6 +749,12 @@ static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
 	.nrg_th_ofdm = 100,
 };
 
+static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Kelvin */
+	priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
+}
+
 /**
  * iwl4965_hw_set_hw_params
  *
@@ -822,7 +789,8 @@ static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
 	priv->hw_params.rx_chains_num = 2;
 	priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
 	priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
-	priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
+	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 
 	priv->hw_params.sens = &iwl4965_sensitivity;
 
@@ -1524,7 +1492,7 @@ static int iwl4965_send_tx_power(struct iwl_priv *priv)
 	struct iwl4965_txpowertable_cmd cmd = { 0 };
 	int ret;
 	u8 band = 0;
-	u8 is_fat = 0;
+	bool is_fat = false;
 	u8 ctrl_chan_high = 0;
 
 	if (test_bit(STATUS_SCANNING, &priv->status)) {
@@ -1602,7 +1570,7 @@ static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
 {
 	int rc;
 	u8 band = 0;
-	u8 is_fat = 0;
+	bool is_fat = false;
 	u8 ctrl_chan_high = 0;
 	struct iwl4965_channel_switch_cmd cmd = { 0 };
 	const struct iwl_channel_info *ch_info;
@@ -1833,8 +1801,6 @@ static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
 static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 				   u16 ssn_idx, u8 tx_fifo)
 {
-	int ret = 0;
-
 	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
 	    (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
 		IWL_WARN(priv,
@@ -1844,10 +1810,6 @@ static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 		return -EINVAL;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	iwl4965_tx_queue_stop_scheduler(priv, txq_id);
 
 	iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
@@ -1861,8 +1823,6 @@ static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 	iwl_txq_ctx_deactivate(priv, txq_id);
 	iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
 
-	iwl_release_nic_access(priv);
-
 	return 0;
 }
 
@@ -1904,7 +1864,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 				  int tx_fifo, int sta_id, int tid, u16 ssn_idx)
 {
 	unsigned long flags;
-	int ret;
 	u16 ra_tid;
 
 	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
@@ -1922,11 +1881,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
 
 	/* Stop this Tx queue before configuring it */
 	iwl4965_tx_queue_stop_scheduler(priv, txq_id);
@@ -1959,7 +1913,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
 	iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
@@ -2268,9 +2221,10 @@ static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
 	cancel_work_sync(&priv->txpower_work);
 }
 
-
 static struct iwl_hcmd_ops iwl4965_hcmd = {
 	.rxon_assoc = iwl4965_send_rxon_assoc,
+	.commit_rxon = iwl_commit_rxon,
+	.set_rxon_chain = iwl_set_rxon_chain,
 };
 
 static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
@@ -2323,7 +2277,13 @@ static struct iwl_lib_ops iwl4965_lib = {
 	},
 	.send_tx_power	= iwl4965_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
-	.temperature = iwl4965_temperature_calib,
+	.post_associate = iwl_post_associate,
+	.config_ap = iwl_config_ap,
+	.isr = iwl_isr_legacy,
+	.temp_ops = {
+		.temperature = iwl4965_temperature_calib,
+		.set_ct_kill = iwl4965_set_ct_threshold,
+	},
 };
 
 static struct iwl_ops iwl4965_ops = {
@@ -2343,6 +2303,7 @@ struct iwl_cfg iwl4965_agn_cfg = {
 	.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
 	.ops = &iwl4965_ops,
 	.mod_params = &iwl4965_mod_params,
+	.use_isr_legacy = true
 };
 
 /* Module firmware */
@@ -2350,8 +2311,6 @@ MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
 
 module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
 module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
 module_param_named(debug, iwl4965_mod_params.debug, uint, 0444);
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
index 15cac70e36e..4ef6804a455 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
@@ -87,6 +87,18 @@
 #define IWL50_NUM_AMPDU_QUEUES		  10
 #define IWL50_FIRST_AMPDU_QUEUE		  10
 
+/* 5150 only */
+#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF	(-5)
+
+static inline s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
+{
+	u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv,
+						       EEPROM_5000_TEMPERATURE);
+	/* offset =  temperature -  voltage / coef */
+	s32 offset = (s32)(temp_calib[0] - temp_calib[1] / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
+	return offset;
+}
+
 /* Fixed (non-configurable) rx data from phy */
 
 /**
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 9452461ce86..b3c648ce8c7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -124,10 +124,6 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 		return ret;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	/* enable DMA */
 	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 
@@ -137,8 +133,6 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 
-	iwl_release_nic_access(priv);
-
 	return ret;
 }
 
@@ -165,12 +159,9 @@ static void iwl5000_apm_stop(struct iwl_priv *priv)
 static int iwl5000_apm_reset(struct iwl_priv *priv)
 {
 	int ret = 0;
-	unsigned long flags;
 
 	iwl5000_apm_stop_master(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
-
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
 	udelay(10);
@@ -193,10 +184,6 @@ static int iwl5000_apm_reset(struct iwl_priv *priv)
 		goto out;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto out;
-
 	/* enable DMA */
 	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 
@@ -205,11 +192,7 @@ static int iwl5000_apm_reset(struct iwl_priv *priv)
 	/* disable L1-Active */
 	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-	iwl_release_nic_access(priv);
-
 out:
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return ret;
 }
@@ -252,11 +235,9 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
 	 * (PCIe power is lost before PERST# is asserted),
 	 * causing ME FW to lose ownership and not being able to obtain it back.
 	 */
-	iwl_grab_nic_access(priv);
 	iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
 				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
-	iwl_release_nic_access(priv);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
@@ -434,15 +415,19 @@ static const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
 	return &priv->eeprom[address];
 }
 
-static s32 iwl5150_get_ct_threshold(struct iwl_priv *priv)
+static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
 {
-	const s32 volt2temp_coef = -5;
-	u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv,
-						EEPROM_5000_TEMPERATURE);
-	/* offset =  temperate -  voltage / coef */
-	s32 offset = temp_calib[0] - temp_calib[1] / volt2temp_coef;
-	s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD) - offset;
-	return threshold * volt2temp_coef;
+	const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
+	s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD) -
+			iwl_temp_calib_to_offset(priv);
+
+	priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
+}
+
+static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
 }
 
 /*
@@ -533,19 +518,9 @@ static int iwl5000_load_section(struct iwl_priv *priv,
 				struct fw_desc *image,
 				u32 dst_addr)
 {
-	int ret = 0;
-	unsigned long flags;
-
 	dma_addr_t phy_addr = image->p_addr;
 	u32 byte_cnt = image->len;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	iwl_write_direct32(priv,
 		FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
 		FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE);
@@ -574,8 +549,6 @@ static int iwl5000_load_section(struct iwl_priv *priv,
 		FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE	|
 		FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
 	return 0;
 }
 
@@ -736,18 +709,11 @@ static int iwl5000_alive_notify(struct iwl_priv *priv)
 {
 	u32 a;
 	unsigned long flags;
-	int ret;
 	int i, chan;
 	u32 reg_val;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	priv->scd_base_addr = iwl_read_prph(priv, IWL50_SCD_SRAM_BASE_ADDR);
 	a = priv->scd_base_addr + IWL50_SCD_CONTEXT_DATA_OFFSET;
 	for (; a < priv->scd_base_addr + IWL50_SCD_TX_STTS_BITMAP_OFFSET;
@@ -815,7 +781,6 @@ static int iwl5000_alive_notify(struct iwl_priv *priv)
 	iwl_txq_ctx_activate(priv, 8);
 	iwl_txq_ctx_activate(priv, 9);
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 
@@ -868,17 +833,8 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
 	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_5150:
-		/* 5150 wants in Kelvin */
-		priv->hw_params.ct_kill_threshold =
-				iwl5150_get_ct_threshold(priv);
-		break;
-	default:
-		/* all others want Celsius */
-		priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
-		break;
-	}
+	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 
 	/* Set initial calibration set */
 	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
@@ -900,7 +856,6 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
 		break;
 	}
 
-
 	return 0;
 }
 
@@ -1006,7 +961,6 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 				  int tx_fifo, int sta_id, int tid, u16 ssn_idx)
 {
 	unsigned long flags;
-	int ret;
 	u16 ra_tid;
 
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
@@ -1024,11 +978,6 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
 
 	/* Stop this Tx queue before configuring it */
 	iwl5000_tx_queue_stop_scheduler(priv, txq_id);
@@ -1064,7 +1013,6 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 	/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
 	iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
@@ -1073,8 +1021,6 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 				   u16 ssn_idx, u8 tx_fifo)
 {
-	int ret;
-
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
 	    (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
 		IWL_ERR(priv,
@@ -1084,10 +1030,6 @@ static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 		return -EINVAL;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	iwl5000_tx_queue_stop_scheduler(priv, txq_id);
 
 	iwl_clear_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1 << txq_id));
@@ -1101,15 +1043,16 @@ static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
 	iwl_txq_ctx_deactivate(priv, txq_id);
 	iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
 
-	iwl_release_nic_access(priv);
-
 	return 0;
 }
 
 u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
 {
 	u16 size = (u16)sizeof(struct iwl_addsta_cmd);
-	memcpy(data, cmd, size);
+	struct iwl_addsta_cmd *addsta = (struct iwl_addsta_cmd *)data;
+	memcpy(addsta, cmd, size);
+	/* resrved in 5000 */
+	addsta->rate_n_flags = cpu_to_le16(0);
 	return size;
 }
 
@@ -1434,6 +1377,17 @@ static void iwl5000_temperature(struct iwl_priv *priv)
 	priv->temperature = le32_to_cpu(priv->statistics.general.temperature);
 }
 
+static void iwl5150_temperature(struct iwl_priv *priv)
+{
+	u32 vt = 0;
+	s32 offset =  iwl_temp_calib_to_offset(priv);
+
+	vt = le32_to_cpu(priv->statistics.general.temperature);
+	vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
+	/* now vt hold the temperature in Kelvin */
+	priv->temperature = KELVIN_TO_CELSIUS(vt);
+}
+
 /* Calc max signal level (dBm) among 3 possible receivers */
 int iwl5000_calc_rssi(struct iwl_priv *priv,
 			     struct iwl_rx_phy_res *rx_resp)
@@ -1474,6 +1428,8 @@ int iwl5000_calc_rssi(struct iwl_priv *priv,
 
 struct iwl_hcmd_ops iwl5000_hcmd = {
 	.rxon_assoc = iwl5000_send_rxon_assoc,
+	.commit_rxon = iwl_commit_rxon,
+	.set_rxon_chain = iwl_set_rxon_chain,
 };
 
 struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
@@ -1502,7 +1458,6 @@ struct iwl_lib_ops iwl5000_lib = {
 	.init_alive_start = iwl5000_init_alive_start,
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
-	.temperature = iwl5000_temperature,
 	.update_chain_flags = iwl_update_chain_flags,
 	.apm_ops = {
 		.init =	iwl5000_apm_init,
@@ -1527,6 +1482,63 @@ struct iwl_lib_ops iwl5000_lib = {
 		.calib_version	= iwl5000_eeprom_calib_version,
 		.query_addr = iwl5000_eeprom_query_addr,
 	},
+	.post_associate = iwl_post_associate,
+	.isr = iwl_isr_ict,
+	.config_ap = iwl_config_ap,
+	.temp_ops = {
+		.temperature = iwl5000_temperature,
+		.set_ct_kill = iwl5000_set_ct_threshold,
+	 },
+};
+
+static struct iwl_lib_ops iwl5150_lib = {
+	.set_hw_params = iwl5000_hw_set_hw_params,
+	.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
+	.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
+	.txq_set_sched = iwl5000_txq_set_sched,
+	.txq_agg_enable = iwl5000_txq_agg_enable,
+	.txq_agg_disable = iwl5000_txq_agg_disable,
+	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
+	.txq_free_tfd = iwl_hw_txq_free_tfd,
+	.txq_init = iwl_hw_tx_queue_init,
+	.rx_handler_setup = iwl5000_rx_handler_setup,
+	.setup_deferred_work = iwl5000_setup_deferred_work,
+	.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+	.load_ucode = iwl5000_load_ucode,
+	.init_alive_start = iwl5000_init_alive_start,
+	.alive_notify = iwl5000_alive_notify,
+	.send_tx_power = iwl5000_send_tx_power,
+	.update_chain_flags = iwl_update_chain_flags,
+	.apm_ops = {
+		.init =	iwl5000_apm_init,
+		.reset = iwl5000_apm_reset,
+		.stop = iwl5000_apm_stop,
+		.config = iwl5000_nic_config,
+		.set_pwr_src = iwl_set_pwr_src,
+	},
+	.eeprom_ops = {
+		.regulatory_bands = {
+			EEPROM_5000_REG_BAND_1_CHANNELS,
+			EEPROM_5000_REG_BAND_2_CHANNELS,
+			EEPROM_5000_REG_BAND_3_CHANNELS,
+			EEPROM_5000_REG_BAND_4_CHANNELS,
+			EEPROM_5000_REG_BAND_5_CHANNELS,
+			EEPROM_5000_REG_BAND_24_FAT_CHANNELS,
+			EEPROM_5000_REG_BAND_52_FAT_CHANNELS
+		},
+		.verify_signature  = iwlcore_eeprom_verify_signature,
+		.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
+		.release_semaphore = iwlcore_eeprom_release_semaphore,
+		.calib_version	= iwl5000_eeprom_calib_version,
+		.query_addr = iwl5000_eeprom_query_addr,
+	},
+	.post_associate = iwl_post_associate,
+	.isr = iwl_isr_ict,
+	.config_ap = iwl_config_ap,
+	.temp_ops = {
+		.temperature = iwl5150_temperature,
+		.set_ct_kill = iwl5150_set_ct_threshold,
+	 },
 };
 
 struct iwl_ops iwl5000_ops = {
@@ -1535,6 +1547,12 @@ struct iwl_ops iwl5000_ops = {
 	.utils = &iwl5000_hcmd_utils,
 };
 
+static struct iwl_ops iwl5150_ops = {
+	.lib = &iwl5150_lib,
+	.hcmd = &iwl5000_hcmd,
+	.utils = &iwl5000_hcmd_utils,
+};
+
 struct iwl_mod_params iwl50_mod_params = {
 	.num_of_queues = IWL50_NUM_QUEUES,
 	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
@@ -1630,7 +1648,7 @@ struct iwl_cfg iwl5150_agn_cfg = {
 	.ucode_api_max = IWL5150_UCODE_API_MAX,
 	.ucode_api_min = IWL5150_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl5000_ops,
+	.ops = &iwl5150_ops,
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
@@ -1643,9 +1661,6 @@ struct iwl_cfg iwl5150_agn_cfg = {
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX));
 
-module_param_named(disable50, iwl50_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable50,
-		  "manually disable the 50XX radio (default 0 [radio on])");
 module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
 MODULE_PARM_DESC(swcrypto50,
 		  "using software crypto engine (default 0 [hardware])\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index cab7842a73a..ff20e5048a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -52,7 +52,7 @@
 /* max allowed rate miss before sync LQ cmd */
 #define IWL_MISSED_RATE_MAX		15
 /* max time to accum history 2 seconds */
-#define IWL_RATE_SCALE_FLUSH_INTVL   (2*HZ)
+#define IWL_RATE_SCALE_FLUSH_INTVL   (3*HZ)
 
 static u8 rs_ht_to_legacy[] = {
 	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
@@ -100,6 +100,7 @@ struct iwl_scale_tbl_info {
 	u8 is_fat;	/* 1 = 40 MHz channel width */
 	u8 is_dup;	/* 1 = duplicated data streams */
 	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
+	u8 max_search;	/* maximun number of tables we can search */
 	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
 	u32 current_rate;  /* rate_n_flags, uCode API format */
 	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
@@ -135,7 +136,7 @@ struct iwl_lq_sta {
 	u32 table_count;
 	u32 total_failed;	/* total failed frames, any/all rates */
 	u32 total_success;	/* total successful frames, any/all rates */
-	u32 flush_timer;	/* time staying in mode before new search */
+	u64 flush_timer;	/* time staying in mode before new search */
 
 	u8 action_counter;	/* # mode-switch actions tried */
 	u8 is_green;
@@ -160,6 +161,7 @@ struct iwl_lq_sta {
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct dentry *rs_sta_dbgfs_scale_table_file;
 	struct dentry *rs_sta_dbgfs_stats_table_file;
+	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
 	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
 	u32 dbg_fixed_rate;
 #endif
@@ -167,10 +169,12 @@ struct iwl_lq_sta {
 
 	/* used to be in sta_info */
 	int last_txrate_idx;
+	/* last tx rate_n_flags */
+	u32 last_rate_n_flags;
 };
 
 static void rs_rate_scale_perform(struct iwl_priv *priv,
-				   struct ieee80211_hdr *hdr,
+				   struct sk_buff *skb,
 				   struct ieee80211_sta *sta,
 				   struct iwl_lq_sta *lq_sta);
 static void rs_fill_link_cmd(const struct iwl_priv *priv,
@@ -191,7 +195,7 @@ static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
  * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
  * "G" is the only table that supports CCK (the first 4 rates).
  */
-/*FIXME:RS:need to separate tables for MIMO2/MIMO3*/
+
 static s32 expected_tpt_A[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
 };
@@ -208,11 +212,11 @@ static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
 };
 
-static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_20MHz[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
 };
 
-static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_20MHzSGI[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
 };
 
@@ -224,14 +228,50 @@ static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
 };
 
-static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_40MHz[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
 };
 
-static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = {
+static s32 expected_tpt_mimo2_40MHzSGI[IWL_RATE_COUNT] = {
 	0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
 };
 
+/* Expected throughput metric MIMO3 */
+static s32 expected_tpt_mimo3_20MHz[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 99, 99, 153, 186, 208, 239, 256, 263, 268
+};
+
+static s32 expected_tpt_mimo3_20MHzSGI[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 106, 106, 162, 194, 215, 246, 262, 268, 273
+};
+
+static s32 expected_tpt_mimo3_40MHz[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 152, 152, 211, 239, 255, 279, 290, 294, 297
+};
+
+static s32 expected_tpt_mimo3_40MHzSGI[IWL_RATE_COUNT] = {
+	0, 0, 0, 0, 160, 160, 219, 245, 261, 284, 294, 297, 300
+};
+
+/* mbps, mcs */
+const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
+  {"1", ""},
+  {"2", ""},
+  {"5.5", ""},
+  {"11", ""},
+  {"6", "BPSK 1/2"},
+  {"9", "BPSK 1/2"},
+  {"12", "QPSK 1/2"},
+  {"18", "QPSK 3/4"},
+  {"24", "16QAM 1/2"},
+  {"36", "16QAM 3/4"},
+  {"48", "64QAM 2/3"},
+  {"54", "64QAM 3/4"},
+  {"60", "64QAM 5/6"}
+};
+
+#define MCS_INDEX_PER_STREAM	(8)
+
 static inline u8 rs_extract_rate(u32 rate_n_flags)
 {
 	return (u8)(rate_n_flags & 0xFF);
@@ -543,6 +583,7 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
 	tbl->is_dup = 0;
 	tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
 	tbl->lq_type = LQ_NONE;
+	tbl->max_search = IWL_MAX_SEARCH;
 
 	/* legacy rate format */
 	if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
@@ -576,8 +617,10 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
 				tbl->lq_type = LQ_MIMO2;
 		/* MIMO3 */
 		} else {
-			if (num_of_ant == 3)
+			if (num_of_ant == 3) {
+				tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
 				tbl->lq_type = LQ_MIMO3;
+			}
 		}
 	}
 	return 0;
@@ -611,19 +654,19 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
 	return 1;
 }
 
-/* FIXME:RS: in 4965 we don't use greenfield at all */
-/* FIXME:RS: don't use greenfield for now in TX */
-#if 0
-static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
+/* in 4965 we don't use greenfield at all */
+static inline u8 rs_use_green(struct iwl_priv *priv,
+			      struct ieee80211_conf *conf)
 {
-	return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
-		priv->current_ht_config.is_green_field &&
-		!priv->current_ht_config.non_GF_STA_present;
-}
-#endif
-static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
-{
-	return 0;
+	u8 is_green;
+
+	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
+		is_green = 0;
+	else
+		is_green = (conf_is_ht(conf) &&
+			   priv->current_ht_config.is_green_field &&
+			   !priv->current_ht_config.non_GF_STA_present);
+	return is_green;
 }
 
 /**
@@ -735,6 +778,7 @@ static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
 
 		tbl->is_fat = 0;
 		tbl->is_SGI = 0;
+		tbl->max_search = IWL_MAX_SEARCH;
 	}
 
 	rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
@@ -793,7 +837,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 	IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
 
 	if (!ieee80211_is_data(hdr->frame_control) ||
-	    is_multicast_ether_addr(hdr->addr1))
+	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
 
 	/* This packet was aggregated but doesn't carry rate scale info */
@@ -902,6 +946,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 	 * else look up the rate that was, finally, successful.
 	 */
 	tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
+	lq_sta->last_rate_n_flags = tx_rate;
 	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
 
 	/* Update frame history window with "success" if Tx got ACKed ... */
@@ -958,7 +1003,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 
 	/* See if there's a better rate or modulation mode to try. */
 	if (sta && sta->supp_rates[sband->band])
-		rs_rate_scale_perform(priv, hdr, sta, lq_sta);
+		rs_rate_scale_perform(priv, skb, sta, lq_sta);
 out:
 	return;
 }
@@ -988,6 +1033,8 @@ static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
 	lq_sta->table_count = 0;
 	lq_sta->total_failed = 0;
 	lq_sta->total_success = 0;
+	lq_sta->flush_timer = jiffies;
+	lq_sta->action_counter = 0;
 }
 
 /*
@@ -1011,17 +1058,26 @@ static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
 			tbl->expected_tpt = expected_tpt_siso20MHzSGI;
 		else
 			tbl->expected_tpt = expected_tpt_siso20MHz;
-
-	} else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */
+	} else if (is_mimo2(tbl->lq_type)) {
 		if (tbl->is_fat && !lq_sta->is_dup)
 			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_mimo40MHzSGI;
+				tbl->expected_tpt = expected_tpt_mimo2_40MHzSGI;
 			else
-				tbl->expected_tpt = expected_tpt_mimo40MHz;
+				tbl->expected_tpt = expected_tpt_mimo2_40MHz;
 		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_mimo20MHzSGI;
+			tbl->expected_tpt = expected_tpt_mimo2_20MHzSGI;
 		else
-			tbl->expected_tpt = expected_tpt_mimo20MHz;
+			tbl->expected_tpt = expected_tpt_mimo2_20MHz;
+	} else if (is_mimo3(tbl->lq_type)) {
+		if (tbl->is_fat && !lq_sta->is_dup)
+			if (tbl->is_SGI)
+				tbl->expected_tpt = expected_tpt_mimo3_40MHzSGI;
+			else
+				tbl->expected_tpt = expected_tpt_mimo3_40MHz;
+		else if (tbl->is_SGI)
+			tbl->expected_tpt = expected_tpt_mimo3_20MHzSGI;
+		else
+			tbl->expected_tpt = expected_tpt_mimo3_20MHz;
 	} else
 		tbl->expected_tpt = expected_tpt_G;
 }
@@ -1130,7 +1186,7 @@ static s32 rs_get_best_rate(struct iwl_priv *priv,
 }
 
 /*
- * Set up search table for MIMO
+ * Set up search table for MIMO2
  */
 static int rs_switch_to_mimo2(struct iwl_priv *priv,
 			     struct iwl_lq_sta *lq_sta,
@@ -1158,10 +1214,10 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
 	tbl->lq_type = LQ_MIMO2;
 	tbl->is_dup = lq_sta->is_dup;
 	tbl->action = 0;
+	tbl->max_search = IWL_MAX_SEARCH;
 	rate_mask = lq_sta->active_mimo2_rate;
 
-	if (priv->current_ht_config.supported_chan_width
-					== IWL_CHANNEL_WIDTH_40MHZ)
+	if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
 		tbl->is_fat = 1;
 	else
 		tbl->is_fat = 0;
@@ -1183,7 +1239,73 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
 	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
 
 	IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
+	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
+						rate, rate_mask);
+		return -1;
+	}
+	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
+
+	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
+		     tbl->current_rate, is_green);
+	return 0;
+}
+
+/*
+ * Set up search table for MIMO3
+ */
+static int rs_switch_to_mimo3(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta,
+			     struct ieee80211_conf *conf,
+			     struct ieee80211_sta *sta,
+			     struct iwl_scale_tbl_info *tbl, int index)
+{
+	u16 rate_mask;
+	s32 rate;
+	s8 is_green = lq_sta->is_green;
+
+	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
+		return -1;
+
+	if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
+						== WLAN_HT_CAP_SM_PS_STATIC)
+		return -1;
+
+	/* Need both Tx chains/antennas to support MIMO */
+	if (priv->hw_params.tx_chains_num < 3)
+		return -1;
+
+	IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n");
+
+	tbl->lq_type = LQ_MIMO3;
+	tbl->is_dup = lq_sta->is_dup;
+	tbl->action = 0;
+	tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
+	rate_mask = lq_sta->active_mimo3_rate;
+
+	if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
+		tbl->is_fat = 1;
+	else
+		tbl->is_fat = 0;
 
+	/* FIXME: - don't toggle SGI here
+	if (tbl->is_fat) {
+		if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
+			tbl->is_SGI = 1;
+		else
+			tbl->is_SGI = 0;
+	} else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
+		tbl->is_SGI = 1;
+	else
+		tbl->is_SGI = 0;
+	*/
+
+	rs_set_expected_tpt_table(lq_sta, tbl);
+
+	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+	IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n",
+		rate, rate_mask);
 	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
 		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
 						rate, rate_mask);
@@ -1217,10 +1339,10 @@ static int rs_switch_to_siso(struct iwl_priv *priv,
 	tbl->is_dup = lq_sta->is_dup;
 	tbl->lq_type = LQ_SISO;
 	tbl->action = 0;
+	tbl->max_search = IWL_MAX_SEARCH;
 	rate_mask = lq_sta->active_siso_rate;
 
-	if (priv->current_ht_config.supported_chan_width
-	    == IWL_CHANNEL_WIDTH_40MHZ)
+	if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
 		tbl->is_fat = 1;
 	else
 		tbl->is_fat = 0;
@@ -1274,15 +1396,15 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
 	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
 	u8 tx_chains_num = priv->hw_params.tx_chains_num;
 	int ret = 0;
+	u8 update_search_tbl_counter = 0;
 
 	for (; ;) {
+		lq_sta->action_counter++;
 		switch (tbl->action) {
 		case IWL_LEGACY_SWITCH_ANTENNA1:
 		case IWL_LEGACY_SWITCH_ANTENNA2:
 			IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n");
 
-			lq_sta->action_counter++;
-
 			if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 &&
 							tx_chains_num <= 1) ||
 			    (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 &&
@@ -1298,6 +1420,7 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
 
 			if (rs_toggle_antenna(valid_tx_ant,
 				&search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
 				rs_set_expected_tpt_table(lq_sta, search_tbl);
 				goto out;
 			}
@@ -1342,9 +1465,29 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
 				goto out;
 			}
 			break;
+
+		case IWL_LEGACY_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n");
+
+			/* Set up search table to try MIMO3 */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->action_counter = 0;
+				goto out;
+			}
+			break;
 		}
 		tbl->action++;
-		if (tbl->action > IWL_LEGACY_SWITCH_MIMO2_BC)
+		if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
 			tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
 
 		if (tbl->action == start_action)
@@ -1357,8 +1500,10 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
 out:
 	lq_sta->search_better_tbl = 1;
 	tbl->action++;
-	if (tbl->action > IWL_LEGACY_SWITCH_MIMO2_BC)
+	if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
 		tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
 	return 0;
 
 }
@@ -1381,6 +1526,7 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
 	u8 start_action = tbl->action;
 	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
 	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	u8 update_search_tbl_counter = 0;
 	int ret;
 
 	for (;;) {
@@ -1401,8 +1547,10 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
 
 			memcpy(search_tbl, tbl, sz);
 			if (rs_toggle_antenna(valid_tx_ant,
-				       &search_tbl->current_rate, search_tbl))
+				       &search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
 				goto out;
+			}
 			break;
 		case IWL_SISO_SWITCH_MIMO2_AB:
 		case IWL_SISO_SWITCH_MIMO2_AC:
@@ -1456,10 +1604,25 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
 			search_tbl->current_rate =
 				rate_n_flags_from_tbl(priv, search_tbl,
 						      index, is_green);
+			update_search_tbl_counter = 1;
 			goto out;
+		case IWL_SISO_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n");
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+			break;
 		}
 		tbl->action++;
-		if (tbl->action > IWL_SISO_SWITCH_GI)
+		if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
 			tbl->action = IWL_SISO_SWITCH_ANTENNA1;
 
 		if (tbl->action == start_action)
@@ -1471,15 +1634,18 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
  out:
 	lq_sta->search_better_tbl = 1;
 	tbl->action++;
-	if (tbl->action > IWL_SISO_SWITCH_GI)
+	if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC)
 		tbl->action = IWL_SISO_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
 	return 0;
 }
 
 /*
- * Try to switch to new modulation mode from MIMO
+ * Try to switch to new modulation mode from MIMO2
  */
-static int rs_move_mimo_to_other(struct iwl_priv *priv,
+static int rs_move_mimo2_to_other(struct iwl_priv *priv,
 				 struct iwl_lq_sta *lq_sta,
 				 struct ieee80211_conf *conf,
 				 struct ieee80211_sta *sta, int index)
@@ -1494,6 +1660,7 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 	u8 start_action = tbl->action;
 	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
 	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	u8 update_search_tbl_counter = 0;
 	int ret;
 
 	for (;;) {
@@ -1501,7 +1668,7 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 		switch (tbl->action) {
 		case IWL_MIMO2_SWITCH_ANTENNA1:
 		case IWL_MIMO2_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE(priv, "LQ: MIMO toggle Antennas\n");
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n");
 
 			if (tx_chains_num <= 2)
 				break;
@@ -1511,8 +1678,10 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 
 			memcpy(search_tbl, tbl, sz);
 			if (rs_toggle_antenna(valid_tx_ant,
-				       &search_tbl->current_rate, search_tbl))
+				       &search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
 				goto out;
+			}
 			break;
 		case IWL_MIMO2_SWITCH_SISO_A:
 		case IWL_MIMO2_SWITCH_SISO_B:
@@ -1549,9 +1718,9 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 						HT_SHORT_GI_40MHZ))
 				break;
 
-			IWL_DEBUG_RATE(priv, "LQ: MIMO toggle SGI/NGI\n");
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n");
 
-			/* Set up new search table for MIMO */
+			/* Set up new search table for MIMO2 */
 			memcpy(search_tbl, tbl, sz);
 			search_tbl->is_SGI = !tbl->is_SGI;
 			rs_set_expected_tpt_table(lq_sta, search_tbl);
@@ -1569,11 +1738,27 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
 			search_tbl->current_rate =
 				rate_n_flags_from_tbl(priv, search_tbl,
 						      index, is_green);
+			update_search_tbl_counter = 1;
 			goto out;
 
+		case IWL_MIMO2_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n");
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
 		}
 		tbl->action++;
-		if (tbl->action > IWL_MIMO2_SWITCH_GI)
+		if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
 			tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
 
 		if (tbl->action == start_action)
@@ -1584,8 +1769,153 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv,
  out:
 	lq_sta->search_better_tbl = 1;
 	tbl->action++;
-	if (tbl->action > IWL_MIMO2_SWITCH_GI)
+	if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
 		tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
+	return 0;
+
+}
+
+/*
+ * Try to switch to new modulation mode from MIMO3
+ */
+static int rs_move_mimo3_to_other(struct iwl_priv *priv,
+				 struct iwl_lq_sta *lq_sta,
+				 struct ieee80211_conf *conf,
+				 struct ieee80211_sta *sta, int index)
+{
+	s8 is_green = lq_sta->is_green;
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action = tbl->action;
+	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	int ret;
+	u8 update_search_tbl_counter = 0;
+
+	for (;;) {
+		lq_sta->action_counter++;
+		switch (tbl->action) {
+		case IWL_MIMO3_SWITCH_ANTENNA1:
+		case IWL_MIMO3_SWITCH_ANTENNA2:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n");
+
+			if (tx_chains_num <= 3)
+				break;
+
+			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+				break;
+
+			memcpy(search_tbl, tbl, sz);
+			if (rs_toggle_antenna(valid_tx_ant,
+				       &search_tbl->current_rate, search_tbl))
+				goto out;
+			break;
+		case IWL_MIMO3_SWITCH_SISO_A:
+		case IWL_MIMO3_SWITCH_SISO_B:
+		case IWL_MIMO3_SWITCH_SISO_C:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n");
+
+			/* Set up new search table for SISO */
+			memcpy(search_tbl, tbl, sz);
+
+			if (tbl->action == IWL_MIMO3_SWITCH_SISO_A)
+				search_tbl->ant_type = ANT_A;
+			else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B)
+				search_tbl->ant_type = ANT_B;
+			else
+				search_tbl->ant_type = ANT_C;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
+
+		case IWL_MIMO3_SWITCH_MIMO2_AB:
+		case IWL_MIMO3_SWITCH_MIMO2_AC:
+		case IWL_MIMO3_SWITCH_MIMO2_BC:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n");
+
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB)
+				search_tbl->ant_type = ANT_AB;
+			else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC)
+				search_tbl->ant_type = ANT_AC;
+			else
+				search_tbl->ant_type = ANT_BC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
+
+		case IWL_MIMO3_SWITCH_GI:
+			if (!tbl->is_fat &&
+				!(priv->current_ht_config.sgf &
+						HT_SHORT_GI_20MHZ))
+				break;
+			if (tbl->is_fat &&
+				!(priv->current_ht_config.sgf &
+						HT_SHORT_GI_40MHZ))
+				break;
+
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n");
+
+			/* Set up new search table for MIMO */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = !tbl->is_SGI;
+			rs_set_expected_tpt_table(lq_sta, search_tbl);
+			/*
+			 * If active table already uses the fastest possible
+			 * modulation (dual stream with short guard interval),
+			 * and it's working well, there's no need to look
+			 * for a better type of modulation!
+			 */
+			if (tbl->is_SGI) {
+				s32 tpt = lq_sta->last_tpt / 100;
+				if (tpt >= search_tbl->expected_tpt[index])
+					break;
+			}
+			search_tbl->current_rate =
+				rate_n_flags_from_tbl(priv, search_tbl,
+						      index, is_green);
+			update_search_tbl_counter = 1;
+			goto out;
+		}
+		tbl->action++;
+		if (tbl->action > IWL_MIMO3_SWITCH_GI)
+			tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
+
+		if (tbl->action == start_action)
+			break;
+	}
+	search_tbl->lq_type = LQ_NONE;
+	return 0;
+ out:
+	lq_sta->search_better_tbl = 1;
+	tbl->action++;
+	if (tbl->action > IWL_MIMO3_SWITCH_GI)
+		tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
 	return 0;
 
 }
@@ -1616,8 +1946,8 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
 		/* Elapsed time using current modulation mode */
 		if (lq_sta->flush_timer)
 			flush_interval_passed =
-			    time_after(jiffies,
-				       (unsigned long)(lq_sta->flush_timer +
+			time_after(jiffies,
+					(unsigned long)(lq_sta->flush_timer +
 					IWL_RATE_SCALE_FLUSH_INTVL));
 
 		/*
@@ -1676,12 +2006,14 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
  * Do rate scaling and search for new modulation mode.
  */
 static void rs_rate_scale_perform(struct iwl_priv *priv,
-				  struct ieee80211_hdr *hdr,
+				  struct sk_buff *skb,
 				  struct ieee80211_sta *sta,
 				  struct iwl_lq_sta *lq_sta)
 {
 	struct ieee80211_hw *hw = priv->hw;
 	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	int low = IWL_RATE_INVALID;
 	int high = IWL_RATE_INVALID;
 	int index;
@@ -1707,11 +2039,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 
 	IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
 
-	/* Send management frames and broadcast/multicast data using
-	 * lowest rate. */
+	/* Send management frames and NO_ACK data using lowest rate. */
 	/* TODO: this could probably be improved.. */
 	if (!ieee80211_is_data(hdr->frame_control) ||
-	    is_multicast_ether_addr(hdr->addr1))
+	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
 
 	if (!sta || !lq_sta)
@@ -1732,6 +2063,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 		active_tbl = 1 - lq_sta->active_tbl;
 
 	tbl = &(lq_sta->lq_info[active_tbl]);
+	if (is_legacy(tbl->lq_type))
+		lq_sta->is_green = 0;
+	else
+		lq_sta->is_green = rs_use_green(priv, conf);
 	is_green = lq_sta->is_green;
 
 	/* current tx rate */
@@ -1951,6 +2286,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 			update_lq = 1;
 			index = low;
 		}
+
 		break;
 	case 1:
 		/* Increase starting rate, update uCode's rate table */
@@ -1997,8 +2333,10 @@ lq_update:
 			rs_move_legacy_other(priv, lq_sta, conf, sta, index);
 		else if (is_siso(tbl->lq_type))
 			rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
+		else if (is_mimo2(tbl->lq_type))
+			rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index);
 		else
-			rs_move_mimo_to_other(priv, lq_sta, conf, sta, index);
+			rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index);
 
 		/* If new "search" mode was selected, set up in uCode table */
 		if (lq_sta->search_better_tbl) {
@@ -2014,8 +2352,11 @@ lq_update:
 				     tbl->current_rate, index);
 			rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
 			iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
-		}
+		} else
+			done_search = 1;
+	}
 
+	if (done_search && !lq_sta->stay_in_tbl) {
 		/* If the "active" (non-search) mode was legacy,
 		 * and we've tried switching antennas,
 		 * but we haven't been able to try HT modes (not available),
@@ -2023,8 +2364,7 @@ lq_update:
 		 * before next round of mode comparisons. */
 		tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
 		if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
-		    lq_sta->action_counter >= 1) {
-			lq_sta->action_counter = 0;
+		    lq_sta->action_counter > tbl1->max_search) {
 			IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n");
 			rs_set_stay_in_table(priv, 1, lq_sta);
 		}
@@ -2033,7 +2373,7 @@ lq_update:
 		 * have been tried and compared, stay in this best modulation
 		 * mode for a while before next round of mode comparisons. */
 		if (lq_sta->enable_counter &&
-		    (lq_sta->action_counter >= IWL_ACTION_LIMIT)) {
+		    (lq_sta->action_counter >= tbl1->max_search)) {
 			if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
 			    (lq_sta->tx_agg_tid_en & (1 << tid)) &&
 			    (tid != MAX_TID_COUNT)) {
@@ -2047,20 +2387,8 @@ lq_update:
 							  lq_sta, sta);
 				}
 			}
-			lq_sta->action_counter = 0;
 			rs_set_stay_in_table(priv, 0, lq_sta);
 		}
-
-	/*
-	 * Else, don't search for a new modulation mode.
-	 * Put new timestamp in stay-in-modulation-mode flush timer if:
-	 * 1)  Not changing rates right now
-	 * 2)  Not just finishing up a search
-	 * 3)  flush timer is empty
-	 */
-	} else {
-		if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer))
-			lq_sta->flush_timer = jiffies;
 	}
 
 out:
@@ -2156,16 +2484,17 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
 	if (sta)
 		mask_bit = sta->supp_rates[sband->band];
 
-	/* Send management frames and broadcast/multicast data using lowest
-	 * rate. */
+	/* Send management frames and NO_ACK data using lowest rate. */
 	if (!ieee80211_is_data(hdr->frame_control) ||
-	    is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
+	    info->flags & IEEE80211_TX_CTL_NO_ACK || !sta || !lq_sta) {
 		if (!mask_bit)
 			info->control.rates[0].idx =
 					rate_lowest_index(sband, NULL);
 		else
 			info->control.rates[0].idx =
 					rate_lowest_index(sband, sta);
+		if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+			info->control.rates[0].count = 1;
 		return;
 	}
 
@@ -2178,8 +2507,8 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
 		if (sta_id == IWL_INVALID_STATION) {
 			IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
 				       hdr->addr1);
-			sta_id = iwl_add_station_flags(priv, hdr->addr1,
-							0, CMD_ASYNC, NULL);
+			sta_id = iwl_add_station(priv, hdr->addr1,
+						false, CMD_ASYNC, NULL);
 		}
 		if ((sta_id != IWL_INVALID_STATION)) {
 			lq_sta->lq.sta_id = sta_id;
@@ -2189,12 +2518,33 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
 		}
 	}
 
-	if (rate_idx < 0 || rate_idx > IWL_RATE_COUNT)
-		rate_idx = rate_lowest_index(sband, sta);
-	else if (sband->band == IEEE80211_BAND_5GHZ)
+	if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
 		rate_idx -= IWL_FIRST_OFDM_RATE;
-
+		/* 6M and 9M shared same MCS index */
+		rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
+		if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
+		    IWL_RATE_MIMO3_6M_PLCP)
+			rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM);
+		else if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
+			 IWL_RATE_MIMO2_6M_PLCP)
+			rate_idx = rate_idx + MCS_INDEX_PER_STREAM;
+		info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_FAT_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD;
+	} else {
+		if (rate_idx < 0 || rate_idx > IWL_RATE_COUNT)
+			rate_idx = rate_lowest_index(sband, sta);
+		else if (sband->band == IEEE80211_BAND_5GHZ)
+			rate_idx -= IWL_FIRST_OFDM_RATE;
+	}
 	info->control.rates[0].idx = rate_idx;
+
 }
 
 static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
@@ -2246,15 +2596,16 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 
 	lq_sta->ibss_sta_added = 0;
 	if (priv->iw_mode == NL80211_IFTYPE_AP) {
-		u8 sta_id = iwl_find_station(priv, sta->addr);
+		u8 sta_id = iwl_find_station(priv,
+								sta->addr);
 
 		/* for IBSS the call are from tasklet */
 		IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
 
 		if (sta_id == IWL_INVALID_STATION) {
 			IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
-			sta_id = iwl_add_station_flags(priv, sta->addr,
-							0, CMD_ASYNC, NULL);
+			sta_id = iwl_add_station(priv, sta->addr, false,
+						CMD_ASYNC, NULL);
 		}
 		if ((sta_id != IWL_INVALID_STATION)) {
 			lq_sta->lq.sta_id = sta_id;
@@ -2436,9 +2787,10 @@ static void rs_fill_link_cmd(const struct iwl_priv *priv,
 		repeat_rate--;
 	}
 
-	lq_cmd->agg_params.agg_frame_cnt_limit = 64;
-	lq_cmd->agg_params.agg_dis_start_th = 3;
-	lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000);
+	lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_MAX;
+	lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+	lq_cmd->agg_params.agg_time_limit =
+		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
 }
 
 static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
@@ -2539,6 +2891,7 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 	char *buff;
 	int desc = 0;
 	int i = 0;
+	int index = 0;
 	ssize_t ret;
 
 	struct iwl_lq_sta *lq_sta = file->private_data;
@@ -2568,8 +2921,11 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 		   ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
 		   desc += sprintf(buff+desc, " %s",
 		   (tbl->is_fat) ? "40MHz" : "20MHz");
-		desc += sprintf(buff+desc, " %s\n", (tbl->is_SGI) ? "SGI" : "");
+		   desc += sprintf(buff+desc, " %s %s\n", (tbl->is_SGI) ? "SGI" : "",
+		   (lq_sta->is_green) ? "GF enabled" : "");
 	}
+	desc += sprintf(buff+desc, "last tx rate=0x%X\n",
+		lq_sta->last_rate_n_flags);
 	desc += sprintf(buff+desc, "general:"
 		"flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
 		lq_sta->lq.general_params.flags,
@@ -2590,10 +2946,19 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 			lq_sta->lq.general_params.start_rate_index[2],
 			lq_sta->lq.general_params.start_rate_index[3]);
 
-
-	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
-		desc += sprintf(buff+desc, " rate[%d] 0x%X\n",
-			i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+		index = iwl_hwrate_to_plcp_idx(
+			le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
+		if (is_legacy(tbl->lq_type)) {
+			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n",
+				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
+				iwl_rate_mcs[index].mbps);
+		} else {
+			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n",
+				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
+				iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs);
+		}
+	}
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
 	kfree(buff);
@@ -2620,13 +2985,14 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
 		return -ENOMEM;
 
 	for (i = 0; i < LQ_SIZE; i++) {
-		desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n"
+		desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d GF=%d\n"
 				"rate=0x%X\n",
 				lq_sta->active_tbl == i ? "*" : "x",
 				lq_sta->lq_info[i].lq_type,
 				lq_sta->lq_info[i].is_SGI,
 				lq_sta->lq_info[i].is_fat,
 				lq_sta->lq_info[i].is_dup,
+				lq_sta->is_green,
 				lq_sta->lq_info[i].current_rate);
 		for (j = 0; j < IWL_RATE_COUNT; j++) {
 			desc += sprintf(buff+desc,
@@ -2646,6 +3012,43 @@ static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
 	.open = open_file_generic,
 };
 
+static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file,
+			char __user *user_buf, size_t count, loff_t *ppos)
+{
+	char buff[120];
+	int desc = 0;
+	ssize_t ret;
+
+	struct iwl_lq_sta *lq_sta = file->private_data;
+	struct iwl_priv *priv;
+	struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
+
+	priv = lq_sta->drv;
+
+	if (is_Ht(tbl->lq_type))
+		desc += sprintf(buff+desc,
+				"Bit Rate= %d Mb/s\n",
+				tbl->expected_tpt[lq_sta->last_txrate_idx]);
+	else
+		desc += sprintf(buff+desc,
+				"Bit Rate= %d Mb/s\n",
+				iwl_rates[lq_sta->last_txrate_idx].ieee >> 1);
+	desc += sprintf(buff+desc,
+			"Signal Level= %d dBm\tNoise Level= %d dBm\n",
+			priv->last_rx_rssi, priv->last_rx_noise);
+	desc += sprintf(buff+desc,
+			"Tsf= 0x%llx\tBeacon time= 0x%08X\n",
+			priv->last_tsf, priv->last_beacon_time);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+	return ret;
+}
+
+static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
+	.read = rs_sta_dbgfs_rate_scale_data_read,
+	.open = open_file_generic,
+};
+
 static void rs_add_debugfs(void *priv, void *priv_sta,
 					struct dentry *dir)
 {
@@ -2656,6 +3059,9 @@ static void rs_add_debugfs(void *priv, void *priv_sta,
 	lq_sta->rs_sta_dbgfs_stats_table_file =
 		debugfs_create_file("rate_stats_table", 0600, dir,
 			lq_sta, &rs_sta_dbgfs_stats_table_ops);
+	lq_sta->rs_sta_dbgfs_rate_scale_data_file =
+		debugfs_create_file("rate_scale_data", 0600, dir,
+			lq_sta, &rs_sta_dbgfs_rate_scale_data_ops);
 	lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
 		debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
 		&lq_sta->tx_agg_tid_en);
@@ -2667,6 +3073,7 @@ static void rs_remove_debugfs(void *priv, void *priv_sta)
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
 	debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
+	debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file);
 	debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
 }
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index ab59acc405d..25050bf315a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -241,6 +241,7 @@ enum {
 #define IWL_LEGACY_SWITCH_MIMO2_AB      3
 #define IWL_LEGACY_SWITCH_MIMO2_AC      4
 #define IWL_LEGACY_SWITCH_MIMO2_BC      5
+#define IWL_LEGACY_SWITCH_MIMO3_ABC     6
 
 /* possible actions when in siso mode */
 #define IWL_SISO_SWITCH_ANTENNA1        0
@@ -249,6 +250,8 @@ enum {
 #define IWL_SISO_SWITCH_MIMO2_AC        3
 #define IWL_SISO_SWITCH_MIMO2_BC        4
 #define IWL_SISO_SWITCH_GI              5
+#define IWL_SISO_SWITCH_MIMO3_ABC       6
+
 
 /* possible actions when in mimo mode */
 #define IWL_MIMO2_SWITCH_ANTENNA1       0
@@ -257,6 +260,23 @@ enum {
 #define IWL_MIMO2_SWITCH_SISO_B         3
 #define IWL_MIMO2_SWITCH_SISO_C         4
 #define IWL_MIMO2_SWITCH_GI             5
+#define IWL_MIMO2_SWITCH_MIMO3_ABC      6
+
+
+/* possible actions when in mimo3 mode */
+#define IWL_MIMO3_SWITCH_ANTENNA1       0
+#define IWL_MIMO3_SWITCH_ANTENNA2       1
+#define IWL_MIMO3_SWITCH_SISO_A         2
+#define IWL_MIMO3_SWITCH_SISO_B         3
+#define IWL_MIMO3_SWITCH_SISO_C         4
+#define IWL_MIMO3_SWITCH_MIMO2_AB       5
+#define IWL_MIMO3_SWITCH_MIMO2_AC       6
+#define IWL_MIMO3_SWITCH_MIMO2_BC       7
+#define IWL_MIMO3_SWITCH_GI             8
+
+
+#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI
+#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC
 
 /*FIXME:RS:add possible actions for MIMO3*/
 
@@ -307,6 +327,13 @@ enum iwl_table_type {
 #define ANT_BC		(ANT_B | ANT_C)
 #define ANT_ABC		(ANT_AB | ANT_C)
 
+#define IWL_MAX_MCS_DISPLAY_SIZE	12
+
+struct iwl_rate_mcs_info {
+	char	mbps[IWL_MAX_MCS_DISPLAY_SIZE];
+	char	mcs[IWL_MAX_MCS_DISPLAY_SIZE];
+};
+
 static inline u8 num_of_ant(u8 mask)
 {
 	return  !!((mask) & ANT_A) +
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index f46ba247577..a5637c4aa85 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -102,7 +102,7 @@ MODULE_ALIAS("iwl4965");
  * function correctly transitions out of the RXON_ASSOC_MSK state if
  * a HW tune is required based on the RXON structure changes.
  */
-static int iwl_commit_rxon(struct iwl_priv *priv)
+int iwl_commit_rxon(struct iwl_priv *priv)
 {
 	/* cast away the const for active_rxon in this function */
 	struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
@@ -190,8 +190,7 @@ static int iwl_commit_rxon(struct iwl_priv *priv)
 
 	iwl_clear_stations_table(priv);
 
-	if (!priv->error_recovering)
-		priv->start_calib = 0;
+	priv->start_calib = 0;
 
 	/* Add the broadcast address so we can send broadcast frames */
 	if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) ==
@@ -246,8 +245,9 @@ static int iwl_commit_rxon(struct iwl_priv *priv)
 void iwl_update_chain_flags(struct iwl_priv *priv)
 {
 
-	iwl_set_rxon_chain(priv);
-	iwl_commit_rxon(priv);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+	iwlcore_commit_rxon(priv);
 }
 
 static void iwl_clear_free_frames(struct iwl_priv *priv)
@@ -503,24 +503,12 @@ int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 			 struct iwl_tx_queue *txq)
 {
-	int ret;
-	unsigned long flags;
 	int txq_id = txq->q.id;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
-
 	/* Circular buffer (TFD queue in DRAM) physical base address */
 	iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
 			     txq->q.dma_addr >> 8);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 
@@ -531,76 +519,6 @@ int iwl_hw_tx_queue_init(struct iwl_priv *priv,
  *
  ******************************************************************************/
 
-static void iwl_ht_conf(struct iwl_priv *priv,
-			    struct ieee80211_bss_conf *bss_conf)
-{
-	struct ieee80211_sta_ht_cap *ht_conf;
-	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
-	struct ieee80211_sta *sta;
-
-	IWL_DEBUG_MAC80211(priv, "enter: \n");
-
-	if (!iwl_conf->is_ht)
-		return;
-
-
-	/*
-	 * It is totally wrong to base global information on something
-	 * that is valid only when associated, alas, this driver works
-	 * that way and I don't know how to fix it.
-	 */
-
-	rcu_read_lock();
-	sta = ieee80211_find_sta(priv->hw, priv->bssid);
-	if (!sta) {
-		rcu_read_unlock();
-		return;
-	}
-	ht_conf = &sta->ht_cap;
-
-	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
-		iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
-	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
-		iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
-
-	iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
-	iwl_conf->max_amsdu_size =
-		!!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
-
-	iwl_conf->supported_chan_width =
-		!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
-
-	/*
-	 * XXX: The HT configuration needs to be moved into iwl_mac_config()
-	 *	to be done there correctly.
-	 */
-
-	iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
-	if (conf_is_ht40_minus(&priv->hw->conf))
-		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-	else if (conf_is_ht40_plus(&priv->hw->conf))
-		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-
-	/* If no above or below channel supplied disable FAT channel */
-	if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
-	    iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
-		iwl_conf->supported_chan_width = 0;
-
-	iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
-
-	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
-
-	iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
-	iwl_conf->ht_protection =
-		bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
-	iwl_conf->non_GF_STA_present =
-		!!(bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
-
-	rcu_read_unlock();
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
 #define MAX_UCODE_BEACON_INTERVAL	4096
 
 static u16 iwl_adjust_beacon_interval(u16 beacon_val)
@@ -636,7 +554,8 @@ static void iwl_setup_rxon_timing(struct iwl_priv *priv)
 		beacon_int = iwl_adjust_beacon_interval(priv->beacon_int);
 		priv->rxon_timing.atim_window = 0;
 	} else {
-		beacon_int = iwl_adjust_beacon_interval(conf->beacon_int);
+		beacon_int = iwl_adjust_beacon_interval(
+			priv->vif->bss_conf.beacon_int);
 
 		/* TODO: we need to get atim_window from upper stack
 		 * for now we set to 0 */
@@ -657,23 +576,6 @@ static void iwl_setup_rxon_timing(struct iwl_priv *priv)
 			le16_to_cpu(priv->rxon_timing.atim_window));
 }
 
-static int iwl_set_mode(struct iwl_priv *priv, int mode)
-{
-	iwl_connection_init_rx_config(priv, mode);
-	iwl_set_rxon_chain(priv);
-	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
-
-	iwl_clear_stations_table(priv);
-
-	/* dont commit rxon if rf-kill is on*/
-	if (!iwl_is_ready_rf(priv))
-		return -EAGAIN;
-
-	iwl_commit_rxon(priv);
-
-	return 0;
-}
-
 /******************************************************************************
  *
  * Generic RX handler implementations
@@ -795,6 +697,7 @@ static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
+	unsigned long reg_flags;
 
 	IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s\n",
 			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
@@ -806,32 +709,25 @@ static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 		iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
 			    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
 
-		if (!iwl_grab_nic_access(priv)) {
-			iwl_write_direct32(
-				priv, HBUS_TARG_MBX_C,
-				HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
-
-			iwl_release_nic_access(priv);
-		}
+		iwl_write_direct32(priv, HBUS_TARG_MBX_C,
+					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 
 		if (!(flags & RXON_CARD_DISABLED)) {
 			iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
 				    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-			if (!iwl_grab_nic_access(priv)) {
-				iwl_write_direct32(
-					priv, HBUS_TARG_MBX_C,
+			iwl_write_direct32(priv, HBUS_TARG_MBX_C,
 					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
 
-				iwl_release_nic_access(priv);
-			}
 		}
 
 		if (flags & RF_CARD_DISABLED) {
 			iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
 				    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
 			iwl_read32(priv, CSR_UCODE_DRV_GP1);
+			spin_lock_irqsave(&priv->reg_lock, reg_flags);
 			if (!iwl_grab_nic_access(priv))
 				iwl_release_nic_access(priv);
+			spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 		}
 	}
 
@@ -841,33 +737,19 @@ static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 
 
-	if (flags & SW_CARD_DISABLED)
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-	else
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-
 	if (!(flags & RXON_CARD_DISABLED))
 		iwl_scan_cancel(priv);
 
 	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
-	     test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
-	    (test_bit(STATUS_RF_KILL_SW, &status) !=
-	     test_bit(STATUS_RF_KILL_SW, &priv->status)))
-		queue_work(priv->workqueue, &priv->rf_kill);
+	     test_bit(STATUS_RF_KILL_HW, &priv->status)))
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+			test_bit(STATUS_RF_KILL_HW, &priv->status));
 	else
 		wake_up_interruptible(&priv->wait_command_queue);
 }
 
 int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 {
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		goto err;
-
 	if (src == IWL_PWR_SRC_VAUX) {
 		if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
 			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
@@ -879,10 +761,7 @@ int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 				       ~APMG_PS_CTRL_MSK_PWR_SRC);
 	}
 
-	iwl_release_nic_access(priv);
-err:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return ret;
+	return 0;
 }
 
 /**
@@ -946,6 +825,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
 	unsigned long flags;
 	u8 fill_rx = 0;
 	u32 count = 8;
+	int total_empty;
 
 	/* uCode's read index (stored in shared DRAM) indicates the last Rx
 	 * buffer that the driver may process (last buffer filled by ucode). */
@@ -956,7 +836,12 @@ void iwl_rx_handle(struct iwl_priv *priv)
 	if (i == r)
 		IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
 
-	if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
+	/* calculate total frames need to be restock after handling RX */
+	total_empty = r - priv->rxq.write_actual;
+	if (total_empty < 0)
+		total_empty += RX_QUEUE_SIZE;
+
+	if (total_empty > (RX_QUEUE_SIZE / 2))
 		fill_rx = 1;
 
 	while (i != r) {
@@ -995,6 +880,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
 			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
 				i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
 			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
+			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
 		} else {
 			/* No handling needed */
 			IWL_DEBUG_RX(priv,
@@ -1032,7 +918,7 @@ void iwl_rx_handle(struct iwl_priv *priv)
 			count++;
 			if (count >= 8) {
 				priv->rxq.read = i;
-				iwl_rx_queue_restock(priv);
+				iwl_rx_replenish_now(priv);
 				count = 0;
 			}
 		}
@@ -1040,7 +926,10 @@ void iwl_rx_handle(struct iwl_priv *priv)
 
 	/* Backtrack one entry */
 	priv->rxq.read = i;
-	iwl_rx_queue_restock(priv);
+	if (fill_rx)
+		iwl_rx_replenish_now(priv);
+	else
+		iwl_rx_queue_restock(priv);
 }
 
 /* call this function to flush any scheduled tasklet */
@@ -1051,24 +940,7 @@ static inline void iwl_synchronize_irq(struct iwl_priv *priv)
 	tasklet_kill(&priv->irq_tasklet);
 }
 
-static void iwl_error_recovery(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	memcpy(&priv->staging_rxon, &priv->recovery_rxon,
-	       sizeof(priv->staging_rxon));
-	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl_commit_rxon(priv);
-
-	iwl_rxon_add_station(priv, priv->bssid, 1);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
-	priv->error_recovering = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static void iwl_irq_tasklet(struct iwl_priv *priv)
+static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
 {
 	u32 inta, handled = 0;
 	u32 inta_fh;
@@ -1116,6 +988,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		/* Tell the device to stop sending interrupts */
 		iwl_disable_interrupts(priv);
 
+		priv->isr_stats.hw++;
 		iwl_irq_handle_error(priv);
 
 		handled |= CSR_INT_BIT_HW_ERR;
@@ -1128,13 +1001,17 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (priv->debug_level & (IWL_DL_ISR)) {
 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
-		if (inta & CSR_INT_BIT_SCD)
+		if (inta & CSR_INT_BIT_SCD) {
 			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
 				      "the frame/frames.\n");
+			priv->isr_stats.sch++;
+		}
 
 		/* Alive notification via Rx interrupt will do the real work */
-		if (inta & CSR_INT_BIT_ALIVE)
+		if (inta & CSR_INT_BIT_ALIVE) {
 			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+			priv->isr_stats.alive++;
+		}
 	}
 #endif
 	/* Safely ignore these bits for debug checks below */
@@ -1150,6 +1027,8 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
 				hw_rf_kill ? "disable radio" : "enable radio");
 
+		priv->isr_stats.rfkill++;
+
 		/* driver only loads ucode once setting the interface up.
 		 * the driver allows loading the ucode even if the radio
 		 * is killed. Hence update the killswitch state here. The
@@ -1160,7 +1039,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 				set_bit(STATUS_RF_KILL_HW, &priv->status);
 			else
 				clear_bit(STATUS_RF_KILL_HW, &priv->status);
-			queue_work(priv->workqueue, &priv->rf_kill);
+			wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
 		}
 
 		handled |= CSR_INT_BIT_RF_KILL;
@@ -1169,6 +1048,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	/* Chip got too hot and stopped itself */
 	if (inta & CSR_INT_BIT_CT_KILL) {
 		IWL_ERR(priv, "Microcode CT kill error detected.\n");
+		priv->isr_stats.ctkill++;
 		handled |= CSR_INT_BIT_CT_KILL;
 	}
 
@@ -1176,6 +1056,8 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	if (inta & CSR_INT_BIT_SW_ERR) {
 		IWL_ERR(priv, "Microcode SW error detected. "
 			" Restarting 0x%X.\n", inta);
+		priv->isr_stats.sw++;
+		priv->isr_stats.sw_err = inta;
 		iwl_irq_handle_error(priv);
 		handled |= CSR_INT_BIT_SW_ERR;
 	}
@@ -1191,6 +1073,8 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
 		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
 
+		priv->isr_stats.wakeup++;
+
 		handled |= CSR_INT_BIT_WAKEUP;
 	}
 
@@ -1199,23 +1083,27 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	 * notifications from uCode come through here*/
 	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
 		iwl_rx_handle(priv);
+		priv->isr_stats.rx++;
 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
 	}
 
 	if (inta & CSR_INT_BIT_FH_TX) {
 		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		priv->isr_stats.tx++;
 		handled |= CSR_INT_BIT_FH_TX;
 		/* FH finished to write, send event */
 		priv->ucode_write_complete = 1;
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
 
-	if (inta & ~handled)
+	if (inta & ~handled) {
 		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		priv->isr_stats.unhandled++;
+	}
 
-	if (inta & ~CSR_INI_SET_MASK) {
+	if (inta & ~(priv->inta_mask)) {
 		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
-			 inta & ~CSR_INI_SET_MASK);
+			 inta & ~priv->inta_mask);
 		IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
 	}
 
@@ -1236,6 +1124,200 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
+/* tasklet for iwlagn interrupt */
+static void iwl_irq_tasklet(struct iwl_priv *priv)
+{
+	u32 inta = 0;
+	u32 handled = 0;
+	unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u32 inta_mask;
+#endif
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Ack/clear/reset pending uCode interrupts.
+	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+	 */
+	iwl_write32(priv, CSR_INT, priv->inta);
+
+	inta = priv->inta;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & IWL_DL_ISR) {
+		/* just for debug */
+		inta_mask = iwl_read32(priv, CSR_INT_MASK);
+		IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
+				inta, inta_mask);
+	}
+#endif
+	/* saved interrupt in inta variable now we can reset priv->inta */
+	priv->inta = 0;
+
+	/* Now service all interrupt bits discovered above. */
+	if (inta & CSR_INT_BIT_HW_ERR) {
+		IWL_ERR(priv, "Microcode HW error detected.  Restarting.\n");
+
+		/* Tell the device to stop sending interrupts */
+		iwl_disable_interrupts(priv);
+
+		priv->isr_stats.hw++;
+		iwl_irq_handle_error(priv);
+
+		handled |= CSR_INT_BIT_HW_ERR;
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		return;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & (IWL_DL_ISR)) {
+		/* NIC fires this, but we don't use it, redundant with WAKEUP */
+		if (inta & CSR_INT_BIT_SCD) {
+			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
+				      "the frame/frames.\n");
+			priv->isr_stats.sch++;
+		}
+
+		/* Alive notification via Rx interrupt will do the real work */
+		if (inta & CSR_INT_BIT_ALIVE) {
+			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+			priv->isr_stats.alive++;
+		}
+	}
+#endif
+	/* Safely ignore these bits for debug checks below */
+	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+	/* HW RF KILL switch toggled */
+	if (inta & CSR_INT_BIT_RF_KILL) {
+		int hw_rf_kill = 0;
+		if (!(iwl_read32(priv, CSR_GP_CNTRL) &
+				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+			hw_rf_kill = 1;
+
+		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
+				hw_rf_kill ? "disable radio" : "enable radio");
+
+		priv->isr_stats.rfkill++;
+
+		/* driver only loads ucode once setting the interface up.
+		 * the driver allows loading the ucode even if the radio
+		 * is killed. Hence update the killswitch state here. The
+		 * rfkill handler will care about restarting if needed.
+		 */
+		if (!test_bit(STATUS_ALIVE, &priv->status)) {
+			if (hw_rf_kill)
+				set_bit(STATUS_RF_KILL_HW, &priv->status);
+			else
+				clear_bit(STATUS_RF_KILL_HW, &priv->status);
+			wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
+		}
+
+		handled |= CSR_INT_BIT_RF_KILL;
+	}
+
+	/* Chip got too hot and stopped itself */
+	if (inta & CSR_INT_BIT_CT_KILL) {
+		IWL_ERR(priv, "Microcode CT kill error detected.\n");
+		priv->isr_stats.ctkill++;
+		handled |= CSR_INT_BIT_CT_KILL;
+	}
+
+	/* Error detected by uCode */
+	if (inta & CSR_INT_BIT_SW_ERR) {
+		IWL_ERR(priv, "Microcode SW error detected. "
+			" Restarting 0x%X.\n", inta);
+		priv->isr_stats.sw++;
+		priv->isr_stats.sw_err = inta;
+		iwl_irq_handle_error(priv);
+		handled |= CSR_INT_BIT_SW_ERR;
+	}
+
+	/* uCode wakes up after power-down sleep */
+	if (inta & CSR_INT_BIT_WAKEUP) {
+		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
+		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
+		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[2]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[3]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
+		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
+
+		priv->isr_stats.wakeup++;
+
+		handled |= CSR_INT_BIT_WAKEUP;
+	}
+
+	/* All uCode command responses, including Tx command responses,
+	 * Rx "responses" (frame-received notification), and other
+	 * notifications from uCode come through here*/
+	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
+			CSR_INT_BIT_RX_PERIODIC)) {
+		IWL_DEBUG_ISR(priv, "Rx interrupt\n");
+		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+			handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+			iwl_write32(priv, CSR_FH_INT_STATUS,
+					CSR49_FH_INT_RX_MASK);
+		}
+		if (inta & CSR_INT_BIT_RX_PERIODIC) {
+			handled |= CSR_INT_BIT_RX_PERIODIC;
+			iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
+		}
+		/* Sending RX interrupt require many steps to be done in the
+		 * the device:
+		 * 1- write interrupt to current index in ICT table.
+		 * 2- dma RX frame.
+		 * 3- update RX shared data to indicate last write index.
+		 * 4- send interrupt.
+		 * This could lead to RX race, driver could receive RX interrupt
+		 * but the shared data changes does not reflect this.
+		 * this could lead to RX race, RX periodic will solve this race
+		 */
+		iwl_write32(priv, CSR_INT_PERIODIC_REG,
+			    CSR_INT_PERIODIC_DIS);
+		iwl_rx_handle(priv);
+		/* Only set RX periodic if real RX is received. */
+		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
+			iwl_write32(priv, CSR_INT_PERIODIC_REG,
+				    CSR_INT_PERIODIC_ENA);
+
+		priv->isr_stats.rx++;
+	}
+
+	if (inta & CSR_INT_BIT_FH_TX) {
+		iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
+		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		priv->isr_stats.tx++;
+		handled |= CSR_INT_BIT_FH_TX;
+		/* FH finished to write, send event */
+		priv->ucode_write_complete = 1;
+		wake_up_interruptible(&priv->wait_command_queue);
+	}
+
+	if (inta & ~handled) {
+		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		priv->isr_stats.unhandled++;
+	}
+
+	if (inta & ~(priv->inta_mask)) {
+		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
+			 inta & ~priv->inta_mask);
+	}
+
+
+	/* Re-enable all interrupts */
+	/* only Re-enable if diabled by irq */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status))
+		iwl_enable_interrupts(priv);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+}
+
+
 /******************************************************************************
  *
  * uCode download functions
@@ -1501,10 +1583,6 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	return ret;
 }
 
-/* temporary */
-static int iwl_mac_beacon_update(struct ieee80211_hw *hw,
-				 struct sk_buff *skb);
-
 /**
  * iwl_alive_start - called after REPLY_ALIVE notification received
  *                   from protocol/runtime uCode (initialization uCode's
@@ -1561,7 +1639,10 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	} else {
 		/* Initialize our rx_config data */
 		iwl_connection_init_rx_config(priv, priv->iw_mode);
-		iwl_set_rxon_chain(priv);
+
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
 		memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
 	}
 
@@ -1571,7 +1652,7 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	iwl_reset_run_time_calib(priv);
 
 	/* Configure the adapter for unassociated operation */
-	iwl_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	/* At this point, the NIC is initialized and operational */
 	iwl_rf_kill_ct_config(priv);
@@ -1582,9 +1663,6 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
-	if (priv->error_recovering)
-		iwl_error_recovery(priv);
-
 	iwl_power_update_mode(priv, 1);
 
 	/* reassociate for ADHOC mode */
@@ -1642,36 +1720,30 @@ static void __iwl_down(struct iwl_priv *priv)
 		ieee80211_stop_queues(priv->hw);
 
 	/* If we have not previously called iwl_init() then
-	 * clear all bits but the RF Kill and SUSPEND bits and return */
+	 * clear all bits but the RF Kill bit and return */
 	if (!iwl_is_init(priv)) {
 		priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
 					STATUS_RF_KILL_HW |
-			       test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-					STATUS_RF_KILL_SW |
 			       test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
 					STATUS_GEO_CONFIGURED |
-			       test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-					STATUS_IN_SUSPEND |
 			       test_bit(STATUS_EXIT_PENDING, &priv->status) <<
 					STATUS_EXIT_PENDING;
 		goto exit;
 	}
 
-	/* ...otherwise clear out all the status bits but the RF Kill and
-	 * SUSPEND bits and continue taking the NIC down. */
+	/* ...otherwise clear out all the status bits but the RF Kill
+	 * bit and continue taking the NIC down. */
 	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
 				STATUS_RF_KILL_HW |
-			test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-				STATUS_RF_KILL_SW |
 			test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
 				STATUS_GEO_CONFIGURED |
-			test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-				STATUS_IN_SUSPEND |
 			test_bit(STATUS_FW_ERROR, &priv->status) <<
 				STATUS_FW_ERROR |
 		       test_bit(STATUS_EXIT_PENDING, &priv->status) <<
 				STATUS_EXIT_PENDING;
 
+	/* device going down, Stop using ICT table */
+	iwl_disable_ict(priv);
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl_clear_bit(priv, CSR_GP_CNTRL,
 			 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
@@ -1680,18 +1752,13 @@ static void __iwl_down(struct iwl_priv *priv)
 	iwl_txq_ctx_stop(priv);
 	iwl_rxq_stop(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!iwl_grab_nic_access(priv)) {
-		iwl_write_prph(priv, APMG_CLK_DIS_REG,
-					 APMG_CLK_VAL_DMA_CLK_RQT);
-		iwl_release_nic_access(priv);
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	iwl_write_prph(priv, APMG_CLK_DIS_REG,
+				APMG_CLK_VAL_DMA_CLK_RQT);
 
 	udelay(5);
 
 	/* FIXME: apm_ops.suspend(priv) */
-	if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+	if (exit_pending)
 		priv->cfg->ops->lib->apm_ops.stop(priv);
 	else
 		priv->cfg->ops->lib->apm_ops.reset(priv);
@@ -1715,6 +1782,49 @@ static void iwl_down(struct iwl_priv *priv)
 	iwl_cancel_deferred_work(priv);
 }
 
+#define HW_READY_TIMEOUT (50)
+
+static int iwl_set_hw_ready(struct iwl_priv *priv)
+{
+	int ret = 0;
+
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+		CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
+
+	/* See if we got it */
+	ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+				CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+				CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+				HW_READY_TIMEOUT);
+	if (ret != -ETIMEDOUT)
+		priv->hw_ready = true;
+	else
+		priv->hw_ready = false;
+
+	IWL_DEBUG_INFO(priv, "hardware %s\n",
+		      (priv->hw_ready == 1) ? "ready" : "not ready");
+	return ret;
+}
+
+static int iwl_prepare_card_hw(struct iwl_priv *priv)
+{
+	int ret = 0;
+
+	IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
+
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+			CSR_HW_IF_CONFIG_REG_PREPARE);
+
+	ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+			~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
+			CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
+
+	if (ret != -ETIMEDOUT)
+		iwl_set_hw_ready(priv);
+
+	return ret;
+}
+
 #define MAX_HW_RESTARTS 5
 
 static int __iwl_up(struct iwl_priv *priv)
@@ -1732,6 +1842,13 @@ static int __iwl_up(struct iwl_priv *priv)
 		return -EIO;
 	}
 
+	iwl_prepare_card_hw(priv);
+
+	if (!priv->hw_ready) {
+		IWL_WARN(priv, "Exit HW not ready\n");
+		return -EIO;
+	}
+
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -1739,9 +1856,10 @@ static int __iwl_up(struct iwl_priv *priv)
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
 
 	if (iwl_is_rfkill(priv)) {
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
+
 		iwl_enable_interrupts(priv);
-		IWL_WARN(priv, "Radio disabled by %s RF Kill switch\n",
-		    test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW");
+		IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
 		return 0;
 	}
 
@@ -1787,9 +1905,6 @@ static int __iwl_up(struct iwl_priv *priv)
 			continue;
 		}
 
-		/* Clear out the uCode error bit if it is set */
-		clear_bit(STATUS_FW_ERROR, &priv->status);
-
 		/* start card; "initialize" will load runtime ucode */
 		iwl_nic_start(priv);
 
@@ -1836,6 +1951,9 @@ static void iwl_bg_alive_start(struct work_struct *data)
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
+	/* enable dram interrupt */
+	iwl_reset_ict(priv);
+
 	mutex_lock(&priv->mutex);
 	iwl_alive_start(priv);
 	mutex_unlock(&priv->mutex);
@@ -1874,7 +1992,6 @@ static void iwl_bg_up(struct work_struct *data)
 	mutex_lock(&priv->mutex);
 	__iwl_up(priv);
 	mutex_unlock(&priv->mutex);
-	iwl_rfkill_set_hw_state(priv);
 }
 
 static void iwl_bg_restart(struct work_struct *data)
@@ -1884,8 +2001,17 @@ static void iwl_bg_restart(struct work_struct *data)
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
-	iwl_down(priv);
-	queue_work(priv->workqueue, &priv->up);
+	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
+		mutex_lock(&priv->mutex);
+		priv->vif = NULL;
+		priv->is_open = 0;
+		mutex_unlock(&priv->mutex);
+		iwl_down(priv);
+		ieee80211_restart_hw(priv->hw);
+	} else {
+		iwl_down(priv);
+		queue_work(priv->workqueue, &priv->up);
+	}
 }
 
 static void iwl_bg_rx_replenish(struct work_struct *data)
@@ -1903,7 +2029,7 @@ static void iwl_bg_rx_replenish(struct work_struct *data)
 
 #define IWL_DELAY_NEXT_SCAN (HZ*2)
 
-static void iwl_post_associate(struct iwl_priv *priv)
+void iwl_post_associate(struct iwl_priv *priv)
 {
 	struct ieee80211_conf *conf = NULL;
 	int ret = 0;
@@ -1925,13 +2051,12 @@ static void iwl_post_associate(struct iwl_priv *priv)
 	if (!priv->vif || !priv->is_open)
 		return;
 
-	iwl_power_cancel_timeout(priv);
 	iwl_scan_cancel_timeout(priv, 200);
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
 	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	iwl_setup_rxon_timing(priv);
 	ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
@@ -1944,7 +2069,9 @@ static void iwl_post_associate(struct iwl_priv *priv)
 
 	iwl_set_rxon_ht(priv, &priv->current_ht_config);
 
-	iwl_set_rxon_chain(priv);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
 	priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
 
 	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
@@ -1966,7 +2093,7 @@ static void iwl_post_associate(struct iwl_priv *priv)
 
 	}
 
-	iwl_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	switch (priv->iw_mode) {
 	case NL80211_IFTYPE_STATION:
@@ -1999,7 +2126,7 @@ static void iwl_post_associate(struct iwl_priv *priv)
 	 * If chain noise has already been run, then we need to enable
 	 * power management here */
 	if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
-		iwl_power_enable_management(priv);
+		iwl_power_update_mode(priv, 0);
 
 	/* Enable Rx differential gain and sensitivity calibrations */
 	iwl_chain_noise_reset(priv);
@@ -2042,8 +2169,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 
 	mutex_unlock(&priv->mutex);
 
-	iwl_rfkill_set_hw_state(priv);
-
 	if (ret)
 		return ret;
 
@@ -2052,9 +2177,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 
 	IWL_DEBUG_INFO(priv, "Start UP work done.\n");
 
-	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
-		return 0;
-
 	/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
 	 * mac80211 will not be run successfully. */
 	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
@@ -2080,10 +2202,8 @@ static void iwl_mac_stop(struct ieee80211_hw *hw)
 
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
-	if (!priv->is_open) {
-		IWL_DEBUG_MAC80211(priv, "leave - skip\n");
+	if (!priv->is_open)
 		return;
-	}
 
 	priv->is_open = 0;
 
@@ -2123,175 +2243,7 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-static int iwl_mac_add_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
-
-	if (priv->vif) {
-		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
-		return -EOPNOTSUPP;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->vif = conf->vif;
-	priv->iw_mode = conf->type;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->mac_addr) {
-		IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr);
-		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
-	}
-
-	if (iwl_set_mode(priv, conf->type) == -EAGAIN)
-		/* we are not ready, will run again when ready */
-		set_bit(STATUS_MODE_PENDING, &priv->status);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-}
-
-/**
- * iwl_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	struct ieee80211_conf *conf = &hw->conf;
-	unsigned long flags = 0;
-	int ret = 0;
-	u16 ch;
-	int scan_active = 0;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
-					conf->channel->hw_value, changed);
-
-	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
-			test_bit(STATUS_SCANNING, &priv->status))) {
-		scan_active = 1;
-		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
-	}
-
-
-	/* during scanning mac80211 will delay channel setting until
-	 * scan finish with changed = 0
-	 */
-	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
-		if (scan_active)
-			goto set_ch_out;
-
-		ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
-		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
-		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-			!is_channel_ibss(ch_info)) {
-			IWL_ERR(priv, "channel %d in band %d not "
-				"IBSS channel\n",
-				conf->channel->hw_value, conf->channel->band);
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		priv->current_ht_config.is_ht = conf_is_ht(conf);
-
-		spin_lock_irqsave(&priv->lock, flags);
-
-
-		/* if we are switching from ht to 2.4 clear flags
-		 * from any ht related info since 2.4 does not
-		 * support ht */
-		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
-			priv->staging_rxon.flags = 0;
-
-		iwl_set_rxon_channel(priv, conf->channel);
-
-		iwl_set_flags_for_band(priv, conf->channel->band);
-		spin_unlock_irqrestore(&priv->lock, flags);
- set_ch_out:
-		/* The list of supported rates and rate mask can be different
-		 * for each band; since the band may have changed, reset
-		 * the rate mask to what mac80211 lists */
-		iwl_set_rate(priv);
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
-		if (conf->flags & IEEE80211_CONF_PS)
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
-		else
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
-		if (ret)
-			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
-
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
-			priv->tx_power_user_lmt, conf->power_level);
-
-		iwl_set_tx_power(priv, conf->power_level, false);
-	}
-
-	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
-	iwl_set_rxon_chain(priv);
-
-	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
-		if (conf->radio_enabled &&
-			iwl_radio_kill_sw_enable_radio(priv)) {
-			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
-						"waiting for uCode\n");
-			goto out;
-		}
-
-		if (!conf->radio_enabled)
-			iwl_radio_kill_sw_disable_radio(priv);
-	}
-
-	if (!conf->radio_enabled) {
-		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
-		goto out;
-	}
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		goto out;
-	}
-
-	if (scan_active)
-		goto out;
-
-	if (memcmp(&priv->active_rxon,
-		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
-		iwl_commit_rxon(priv);
-	else
-		IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n");
-
-
-out:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
-static void iwl_config_ap(struct iwl_priv *priv)
+void iwl_config_ap(struct iwl_priv *priv)
 {
 	int ret = 0;
 	unsigned long flags;
@@ -2304,7 +2256,7 @@ static void iwl_config_ap(struct iwl_priv *priv)
 
 		/* RXON - unassoc (to set timing command) */
 		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
+		iwlcore_commit_rxon(priv);
 
 		/* RXON Timing */
 		iwl_setup_rxon_timing(priv);
@@ -2314,7 +2266,8 @@ static void iwl_config_ap(struct iwl_priv *priv)
 			IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
 					"Attempting to continue.\n");
 
-		iwl_set_rxon_chain(priv);
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv);
 
 		/* FIXME: what should be the assoc_id for AP? */
 		priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
@@ -2340,7 +2293,7 @@ static void iwl_config_ap(struct iwl_priv *priv)
 		}
 		/* restore RXON assoc */
 		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
+		iwlcore_commit_rxon(priv);
 		spin_lock_irqsave(&priv->lock, flags);
 		iwl_activate_qos(priv, 1);
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -2353,194 +2306,6 @@ static void iwl_config_ap(struct iwl_priv *priv)
 	 * clear sta table, add BCAST sta... */
 }
 
-
-static int iwl_mac_config_interface(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	int rc;
-
-	if (conf == NULL)
-		return -EIO;
-
-	if (priv->vif != vif) {
-		IWL_DEBUG_MAC80211(priv, "leave - priv->vif != vif\n");
-		return 0;
-	}
-
-	if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-	    conf->changed & IEEE80211_IFCC_BEACON) {
-		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-		if (!beacon)
-			return -ENOMEM;
-		mutex_lock(&priv->mutex);
-		rc = iwl_mac_beacon_update(hw, beacon);
-		mutex_unlock(&priv->mutex);
-		if (rc)
-			return rc;
-	}
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->bssid)
-		IWL_DEBUG_MAC80211(priv, "bssid: %pM\n", conf->bssid);
-
-/*
- * very dubious code was here; the probe filtering flag is never set:
- *
-	if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
-	    !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
- */
-
-	if (priv->iw_mode == NL80211_IFTYPE_AP) {
-		if (!conf->bssid) {
-			conf->bssid = priv->mac_addr;
-			memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
-			IWL_DEBUG_MAC80211(priv, "bssid was set to: %pM\n",
-					   conf->bssid);
-		}
-		if (priv->ibss_beacon)
-			dev_kfree_skb(priv->ibss_beacon);
-
-		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
-	}
-
-	if (iwl_is_rfkill(priv))
-		goto done;
-
-	if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
-	    !is_multicast_ether_addr(conf->bssid)) {
-		/* If there is currently a HW scan going on in the background
-		 * then we need to cancel it else the RXON below will fail. */
-		if (iwl_scan_cancel_timeout(priv, 100)) {
-			IWL_WARN(priv, "Aborted scan still in progress "
-				    "after 100ms\n");
-			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
-			mutex_unlock(&priv->mutex);
-			return -EAGAIN;
-		}
-		memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
-
-		/* TODO: Audit driver for usage of these members and see
-		 * if mac80211 deprecates them (priv->bssid looks like it
-		 * shouldn't be there, but I haven't scanned the IBSS code
-		 * to verify) - jpk */
-		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-
-		if (priv->iw_mode == NL80211_IFTYPE_AP)
-			iwl_config_ap(priv);
-		else {
-			rc = iwl_commit_rxon(priv);
-			if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
-				iwl_rxon_add_station(
-					priv, priv->active_rxon.bssid_addr, 1);
-		}
-
-	} else {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
-	}
-
- done:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-
-	return 0;
-}
-
-static void iwl_mac_remove_interface(struct ieee80211_hw *hw,
-				     struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	mutex_lock(&priv->mutex);
-
-	if (iwl_is_ready_rf(priv)) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
-	}
-	if (priv->vif == conf->vif) {
-		priv->vif = NULL;
-		memset(priv->bssid, 0, ETH_ALEN);
-	}
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-}
-
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-static void iwl_bss_info_changed(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *bss_conf,
-				     u32 changes)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
-
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
-				   bss_conf->use_short_preamble);
-		if (bss_conf->use_short_preamble)
-			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
-		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
-			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
-	}
-
-	if (changes & BSS_CHANGED_HT) {
-		iwl_ht_conf(priv, bss_conf);
-		iwl_set_rxon_chain(priv);
-	}
-
-	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
-		/* This should never happen as this function should
-		 * never be called from interrupt context. */
-		if (WARN_ON_ONCE(in_interrupt()))
-			return;
-		if (bss_conf->assoc) {
-			priv->assoc_id = bss_conf->aid;
-			priv->beacon_int = bss_conf->beacon_int;
-			priv->power_data.dtim_period = bss_conf->dtim_period;
-			priv->timestamp = bss_conf->timestamp;
-			priv->assoc_capability = bss_conf->assoc_capability;
-
-			/* we have just associated, don't start scan too early
-			 * leave time for EAPOL exchange to complete
-			 */
-			priv->next_scan_jiffies = jiffies +
-					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
-			mutex_lock(&priv->mutex);
-			iwl_post_associate(priv);
-			mutex_unlock(&priv->mutex);
-		} else {
-			priv->assoc_id = 0;
-			IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
-		}
-	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
-			IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
-			iwl_send_rxon_assoc(priv);
-	}
-
-}
-
 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
 			struct ieee80211_key_conf *keyconf, const u8 *addr,
 			u32 iv32, u16 *phase1key)
@@ -2623,49 +2388,6 @@ static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	return ret;
 }
 
-static int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
-			   const struct ieee80211_tx_queue_params *params)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	int q;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (queue >= AC_NUM) {
-		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
-		return 0;
-	}
-
-	q = AC_NUM - 1 - queue;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
-	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
-	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
-	priv->qos_data.def_qos_parm.ac[q].edca_txop =
-			cpu_to_le16((params->txop * 32));
-
-	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
-	priv->qos_data.qos_active = 1;
-
-	if (priv->iw_mode == NL80211_IFTYPE_AP)
-		iwl_activate_qos(priv, 1);
-	else if (priv->assoc_id && iwl_is_associated(priv))
-		iwl_activate_qos(priv, 0);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-}
-
 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 			     enum ieee80211_ampdu_mlme_action action,
 			     struct ieee80211_sta *sta, u16 tid, u16 *ssn)
@@ -2708,41 +2430,6 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 	return 0;
 }
 
-static int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
-				struct ieee80211_tx_queue_stats *stats)
-{
-	struct iwl_priv *priv = hw->priv;
-	int i, avail;
-	struct iwl_tx_queue *txq;
-	struct iwl_queue *q;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < AC_NUM; i++) {
-		txq = &priv->txq[i];
-		q = &txq->q;
-		avail = iwl_queue_space(q);
-
-		stats[i].len = q->n_window - avail;
-		stats[i].limit = q->n_window - q->high_mark;
-		stats[i].count = q->n_window;
-
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-	return 0;
-}
-
 static int iwl_mac_get_stats(struct ieee80211_hw *hw,
 			     struct ieee80211_low_level_stats *stats)
 {
@@ -2755,120 +2442,6 @@ static int iwl_mac_get_stats(struct ieee80211_hw *hw,
 	return 0;
 }
 
-static void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	spin_lock_irqsave(&priv->lock, flags);
-	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_reset_qos(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = 0;
-	priv->assoc_capability = 0;
-	priv->assoc_station_added = 0;
-
-	/* new association get rid of ibss beacon skb */
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = NULL;
-
-	priv->beacon_int = priv->hw->conf.beacon_int;
-	priv->timestamp = 0;
-	if ((priv->iw_mode == NL80211_IFTYPE_STATION))
-		priv->beacon_int = 0;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	/* we are restarting association process
-	 * clear RXON_FILTER_ASSOC_MSK bit
-	 */
-	if (priv->iw_mode != NL80211_IFTYPE_AP) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl_commit_rxon(priv);
-	}
-
-	iwl_power_update_mode(priv, 0);
-
-	/* Per mac80211.h: This is only used in IBSS mode... */
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-
-		/* switch to CAM during association period.
-		 * the ucode will block any association/authentication
-		 * frome during assiciation period if it can not hear
-		 * the AP because of PM. the timer enable PM back is
-		 * association do not complete
-		 */
-		if (priv->hw->conf.channel->flags & (IEEE80211_CHAN_PASSIVE_SCAN |
-						     IEEE80211_CHAN_RADAR))
-				iwl_power_disable_management(priv, 3000);
-
-		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	iwl_set_rate(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
-static int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	__le64 timestamp;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = skb;
-
-	priv->assoc_id = 0;
-	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_reset_qos(priv);
-
-	iwl_post_associate(priv);
-
-
-	return 0;
-}
-
 /*****************************************************************************
  *
  * sysfs attributes
@@ -2888,7 +2461,7 @@ static int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 static ssize_t show_debug_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%08X\n", priv->debug_level);
 }
@@ -2896,7 +2469,7 @@ static ssize_t store_debug_level(struct device *d,
 				struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	int ret;
 
@@ -2919,7 +2492,7 @@ static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
 static ssize_t show_version(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	struct iwl_alive_resp *palive = &priv->card_alive;
 	ssize_t pos = 0;
 	u16 eeprom_ver;
@@ -2936,8 +2509,10 @@ static ssize_t show_version(struct device *d,
 
 	if (priv->eeprom) {
 		eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
-		pos += sprintf(buf + pos, "EEPROM version: 0x%x\n",
-				 eeprom_ver);
+		pos += sprintf(buf + pos, "NVM Type: %s, version: 0x%x\n",
+			       (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+			       ? "OTP" : "EEPROM", eeprom_ver);
+
 	} else {
 		pos += sprintf(buf + pos, "EEPROM not initialzed\n");
 	}
@@ -2950,7 +2525,7 @@ static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL);
 static ssize_t show_temperature(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -2963,7 +2538,7 @@ static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
 static ssize_t show_tx_power(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	if (!iwl_is_ready_rf(priv))
 		return sprintf(buf, "off\n");
@@ -2975,7 +2550,7 @@ static ssize_t store_tx_power(struct device *d,
 			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	int ret;
 
@@ -2993,7 +2568,7 @@ static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
 static ssize_t show_flags(struct device *d,
 			  struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
 }
@@ -3002,7 +2577,7 @@ static ssize_t store_flags(struct device *d,
 			   struct device_attribute *attr,
 			   const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	u32 flags;
 	int ret = strict_strtoul(buf, 0, &val);
@@ -3018,7 +2593,7 @@ static ssize_t store_flags(struct device *d,
 		else {
 			IWL_DEBUG_INFO(priv, "Commit rxon.flags = 0x%04X\n", flags);
 			priv->staging_rxon.flags = cpu_to_le32(flags);
-			iwl_commit_rxon(priv);
+			iwlcore_commit_rxon(priv);
 		}
 	}
 	mutex_unlock(&priv->mutex);
@@ -3031,7 +2606,7 @@ static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
 static ssize_t show_filter_flags(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%04X\n",
 		le32_to_cpu(priv->active_rxon.filter_flags));
@@ -3041,7 +2616,7 @@ static ssize_t store_filter_flags(struct device *d,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	u32 filter_flags;
 	int ret = strict_strtoul(buf, 0, &val);
@@ -3059,7 +2634,7 @@ static ssize_t store_filter_flags(struct device *d,
 				       "0x%04X\n", filter_flags);
 			priv->staging_rxon.filter_flags =
 				cpu_to_le32(filter_flags);
-			iwl_commit_rxon(priv);
+			iwlcore_commit_rxon(priv);
 		}
 	}
 	mutex_unlock(&priv->mutex);
@@ -3102,32 +2677,37 @@ static ssize_t show_power_level(struct device *d,
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	int mode = priv->power_data.user_power_setting;
-	int system = priv->power_data.system_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	switch (system) {
-	case IWL_POWER_SYS_AUTO:
-		p += sprintf(p, "SYSTEM:auto");
-		break;
-	case IWL_POWER_SYS_AC:
-		p += sprintf(p, "SYSTEM:ac");
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		p += sprintf(p, "SYSTEM:battery");
-		break;
-	}
-
-	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ?
-			"fixed" : "auto");
-	p += sprintf(p, "\tINDEX:%d", level);
-	p += sprintf(p, "\n");
+	p += sprintf(p, "INDEX:%d\t", level);
+	p += sprintf(p, "USER:%d\n", mode);
 	return p - buf + 1;
 }
 
 static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
 		   store_power_level);
 
+static ssize_t show_qos(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	char *p = buf;
+	int   q;
+
+	for (q = 0; q < AC_NUM; q++) {
+		p += sprintf(p, "\tcw_min\tcw_max\taifsn\ttxop\n");
+		p += sprintf(p, "AC[%d]\t%u\t%u\t%u\t%u\n", q,
+			     priv->qos_data.def_qos_parm.ac[q].cw_min,
+			     priv->qos_data.def_qos_parm.ac[q].cw_max,
+			     priv->qos_data.def_qos_parm.ac[q].aifsn,
+			     priv->qos_data.def_qos_parm.ac[q].edca_txop);
+	}
+
+	return p - buf + 1;
+}
+
+static DEVICE_ATTR(qos, S_IRUGO, show_qos, NULL);
 
 static ssize_t show_statistics(struct device *d,
 			       struct device_attribute *attr, char *buf)
@@ -3183,14 +2763,12 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	INIT_WORK(&priv->up, iwl_bg_up);
 	INIT_WORK(&priv->restart, iwl_bg_restart);
 	INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
-	INIT_WORK(&priv->rf_kill, iwl_bg_rf_kill);
 	INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
 	INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
 	INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
 	INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
 
 	iwl_setup_scan_deferred_work(priv);
-	iwl_setup_power_deferred_work(priv);
 
 	if (priv->cfg->ops->lib->setup_deferred_work)
 		priv->cfg->ops->lib->setup_deferred_work(priv);
@@ -3199,8 +2777,12 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	priv->statistics_periodic.data = (unsigned long)priv;
 	priv->statistics_periodic.function = iwl_bg_statistics_periodic;
 
-	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
-		     iwl_irq_tasklet, (unsigned long)priv);
+	if (!priv->cfg->use_isr_legacy)
+		tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+			iwl_irq_tasklet, (unsigned long)priv);
+	else
+		tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+			iwl_irq_tasklet_legacy, (unsigned long)priv);
 }
 
 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
@@ -3210,7 +2792,6 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv)
 
 	cancel_delayed_work_sync(&priv->init_alive_start);
 	cancel_delayed_work(&priv->scan_check);
-	cancel_delayed_work_sync(&priv->set_power_save);
 	cancel_delayed_work(&priv->alive_start);
 	cancel_work_sync(&priv->beacon_update);
 	del_timer_sync(&priv->statistics_periodic);
@@ -3227,7 +2808,7 @@ static struct attribute *iwl_sysfs_entries[] = {
 	&dev_attr_debug_level.attr,
 #endif
 	&dev_attr_version.attr,
-
+	&dev_attr_qos.attr,
 	NULL
 };
 
@@ -3243,7 +2824,6 @@ static struct ieee80211_ops iwl_hw_ops = {
 	.add_interface = iwl_mac_add_interface,
 	.remove_interface = iwl_mac_remove_interface,
 	.config = iwl_mac_config,
-	.config_interface = iwl_mac_config_interface,
 	.configure_filter = iwl_configure_filter,
 	.set_key = iwl_mac_set_key,
 	.update_tkip_key = iwl_mac_update_tkip_key,
@@ -3291,6 +2871,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
 	priv->cfg = cfg;
 	priv->pci_dev = pdev;
+	priv->inta_mask = CSR_INI_SET_MASK;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	priv->debug_level = priv->cfg->mod_params->debug;
@@ -3341,6 +2922,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		(unsigned long long) pci_resource_len(pdev, 0));
 	IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
 
+	/* this spin lock will be used in apm_ops.init and EEPROM access
+	 * we should init now
+	 */
+	spin_lock_init(&priv->reg_lock);
 	iwl_hw_detect(priv);
 	IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s REV=0x%X\n",
 		priv->cfg->name, priv->hw_rev);
@@ -3349,6 +2934,12 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * PCI Tx retries from interfering with C3 CPU state */
 	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
 
+	iwl_prepare_card_hw(priv);
+	if (!priv->hw_ready) {
+		IWL_WARN(priv, "Failed, HW not ready\n");
+		goto out_iounmap;
+	}
+
 	/* amp init */
 	err = priv->cfg->ops->lib->apm_ops.init(priv);
 	if (err < 0) {
@@ -3390,18 +2981,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_free_eeprom;
 	/* At this point both hw and priv are initialized. */
 
-	/**********************************
-	 * 7. Initialize module parameters
-	 **********************************/
-
-	/* Disable radio (SW RF KILL) via parameter when loading driver */
-	if (priv->cfg->mod_params->disable) {
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-		IWL_DEBUG_INFO(priv, "Radio disabled.\n");
-	}
-
 	/********************
-	 * 8. Setup services
+	 * 7. Setup services
 	 ********************/
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl_disable_interrupts(priv);
@@ -3409,8 +2990,9 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_enable_msi(priv->pci_dev);
 
-	err = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED,
-			  DRV_NAME, priv);
+	iwl_alloc_isr_ict(priv);
+	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
+			  IRQF_SHARED, DRV_NAME, priv);
 	if (err) {
 		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
 		goto out_disable_msi;
@@ -3425,7 +3007,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	iwl_setup_rx_handlers(priv);
 
 	/**********************************
-	 * 9. Setup and register mac80211
+	 * 8. Setup and register mac80211
 	 **********************************/
 
 	/* enable interrupts if needed: hw bug w/a */
@@ -3443,7 +3025,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	err = iwl_dbgfs_register(priv, DRV_NAME);
 	if (err)
-		IWL_ERR(priv, "failed to create debugfs files\n");
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
 
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
@@ -3451,12 +3033,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	else
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
 
-	err = iwl_rfkill_init(priv);
-	if (err)
-		IWL_ERR(priv, "Unable to initialize RFKILL system. "
-				  "Ignoring error: %d\n", err);
-	else
-		iwl_rfkill_set_hw_state(priv);
+	wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+		test_bit(STATUS_RF_KILL_HW, &priv->status));
 
 	iwl_power_initialize(priv);
 	return 0;
@@ -3467,6 +3045,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
  out_free_irq:
 	free_irq(priv->pci_dev->irq, priv);
+	iwl_free_isr_ict(priv);
  out_disable_msi:
 	pci_disable_msi(priv->pci_dev);
 	iwl_uninit_drv(priv);
@@ -3519,7 +3098,6 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
 
 	iwl_synchronize_irq(priv);
 
-	iwl_rfkill_unregister(priv);
 	iwl_dealloc_ucode_pci(priv);
 
 	if (priv->rxq.bd)
@@ -3548,51 +3126,14 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
 
 	iwl_uninit_drv(priv);
 
+	iwl_free_isr_ict(priv);
+
 	if (priv->ibss_beacon)
 		dev_kfree_skb(priv->ibss_beacon);
 
 	ieee80211_free_hw(priv->hw);
 }
 
-#ifdef CONFIG_PM
-
-static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-
-	if (priv->is_open) {
-		set_bit(STATUS_IN_SUSPEND, &priv->status);
-		iwl_mac_stop(priv->hw);
-		priv->is_open = 1;
-	}
-
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	return 0;
-}
-
-static int iwl_pci_resume(struct pci_dev *pdev)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-	int ret;
-
-	pci_set_power_state(pdev, PCI_D0);
-	ret = pci_enable_device(pdev);
-	if (ret)
-		return ret;
-	pci_restore_state(pdev);
-	iwl_enable_interrupts(priv);
-
-	if (priv->is_open)
-		iwl_mac_start(priv->hw);
-
-	clear_bit(STATUS_IN_SUSPEND, &priv->status);
-	return 0;
-}
-
-#endif /* CONFIG_PM */
 
 /*****************************************************************************
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index 735f3f19928..a5d63672ad3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -857,7 +857,7 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
 		priv->cfg->ops->lib->update_chain_flags(priv);
 
 	data->state = IWL_CHAIN_NOISE_DONE;
-	iwl_power_enable_management(priv);
+	iwl_power_update_mode(priv, 0);
 }
 EXPORT_SYMBOL(iwl_chain_noise_calibration);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 29d40746da6..c87033bf3ad 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -614,8 +614,18 @@ enum {
 
 #define RXON_FLG_CHANNEL_MODE_POS		(25)
 #define RXON_FLG_CHANNEL_MODE_MSK		cpu_to_le32(0x3 << 25)
-#define RXON_FLG_CHANNEL_MODE_PURE_40_MSK	cpu_to_le32(0x1 << 25)
-#define RXON_FLG_CHANNEL_MODE_MIXED_MSK		cpu_to_le32(0x2 << 25)
+
+/* channel mode */
+enum {
+	CHANNEL_MODE_LEGACY = 0,
+	CHANNEL_MODE_PURE_40 = 1,
+	CHANNEL_MODE_MIXED = 2,
+	CHANNEL_MODE_RESERVED = 3,
+};
+#define RXON_FLG_CHANNEL_MODE_LEGACY	cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_PURE_40	cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_MIXED	cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS)
+
 /* CTS to self (if spec allows) flag */
 #define RXON_FLG_SELF_CTS_EN			cpu_to_le32(0x1<<30)
 
@@ -1057,7 +1067,7 @@ struct iwl_addsta_cmd {
 	 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
 	__le16 tid_disable_tx;
 
-	__le16	reserved1;
+	__le16	rate_n_flags;		/* 3945 only */
 
 	/* TID for which to add block-ack support.
 	 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
@@ -1903,6 +1913,18 @@ struct iwl_link_qual_general_params {
 	u8 start_rate_index[LINK_QUAL_AC_NUM];
 } __attribute__ ((packed));
 
+#define LINK_QUAL_AGG_TIME_LIMIT_DEF	(4000) /* 4 milliseconds */
+#define LINK_QUAL_AGG_TIME_LIMIT_MAX	(65535)
+#define LINK_QUAL_AGG_TIME_LIMIT_MIN	(0)
+
+#define LINK_QUAL_AGG_DISABLE_START_DEF	(3)
+#define LINK_QUAL_AGG_DISABLE_START_MAX	(255)
+#define LINK_QUAL_AGG_DISABLE_START_MIN	(0)
+
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF	(31)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX	(64)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MIN	(0)
+
 /**
  * struct iwl_link_qual_agg_params
  *
@@ -2469,11 +2491,12 @@ struct iwl_ssid_ie {
 	u8 ssid[32];
 } __attribute__ ((packed));
 
-#define PROBE_OPTION_MAX_API1		0x4
-#define PROBE_OPTION_MAX        	0x14
+#define PROBE_OPTION_MAX_3945		4
+#define PROBE_OPTION_MAX		20
 #define TX_CMD_LIFE_TIME_INFINITE	cpu_to_le32(0xFFFFFFFF)
 #define IWL_GOOD_CRC_TH			cpu_to_le16(1)
 #define IWL_MAX_SCAN_SIZE 1024
+#define IWL_MAX_PROBE_REQUEST		200
 
 /*
  * REPLY_SCAN_CMD = 0x80 (command)
@@ -2552,7 +2575,7 @@ struct iwl3945_scan_cmd {
 	struct iwl3945_tx_cmd tx_cmd;
 
 	/* For directed active scans (set to all-0s otherwise) */
-	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_API1];
+	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
 
 	/*
 	 * Probe request frame, followed by channel list.
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index c54fb93e9d7..f9d16ca5b3d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -36,9 +36,9 @@
 #include "iwl-debug.h"
 #include "iwl-core.h"
 #include "iwl-io.h"
-#include "iwl-rfkill.h"
 #include "iwl-power.h"
 #include "iwl-sta.h"
+#include "iwl-helpers.h"
 
 
 MODULE_DESCRIPTION("iwl core");
@@ -59,6 +59,8 @@ MODULE_LICENSE("GPL");
 				    IWL_RATE_##pp##M_INDEX,    \
 				    IWL_RATE_##np##M_INDEX }
 
+static irqreturn_t iwl_isr(int irq, void *data);
+
 /*
  * Parameter order:
  *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
@@ -273,6 +275,14 @@ void iwl_activate_qos(struct iwl_priv *priv, u8 force)
 }
 EXPORT_SYMBOL(iwl_activate_qos);
 
+/*
+ * AC        CWmin         CW max      AIFSN      TXOP Limit    TXOP Limit
+ *                                              (802.11b)      (802.11a/g)
+ * AC_BK      15            1023        7           0               0
+ * AC_BE      15            1023        3           0               0
+ * AC_VI       7              15        2          6.016ms       3.008ms
+ * AC_VO       3               7        2          3.264ms       1.504ms
+ */
 void iwl_reset_qos(struct iwl_priv *priv)
 {
 	u16 cw_min = 15;
@@ -304,6 +314,7 @@ void iwl_reset_qos(struct iwl_priv *priv)
 	if (priv->qos_data.qos_active)
 		aifs = 3;
 
+	/* AC_BE */
 	priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
 	priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
 	priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
@@ -311,6 +322,7 @@ void iwl_reset_qos(struct iwl_priv *priv)
 	priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
 
 	if (priv->qos_data.qos_active) {
+		/* AC_BK */
 		i = 1;
 		priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
 		priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
@@ -318,11 +330,12 @@ void iwl_reset_qos(struct iwl_priv *priv)
 		priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 
+		/* AC_VI */
 		i = 2;
 		priv->qos_data.def_qos_parm.ac[i].cw_min =
 			cpu_to_le16((cw_min + 1) / 2 - 1);
 		priv->qos_data.def_qos_parm.ac[i].cw_max =
-			cpu_to_le16(cw_max);
+			cpu_to_le16(cw_min);
 		priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
 		if (is_legacy)
 			priv->qos_data.def_qos_parm.ac[i].edca_txop =
@@ -332,11 +345,12 @@ void iwl_reset_qos(struct iwl_priv *priv)
 				cpu_to_le16(3008);
 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 
+		/* AC_VO */
 		i = 3;
 		priv->qos_data.def_qos_parm.ac[i].cw_min =
 			cpu_to_le16((cw_min + 1) / 4 - 1);
 		priv->qos_data.def_qos_parm.ac[i].cw_max =
-			cpu_to_le16((cw_max + 1) / 2 - 1);
+			cpu_to_le16((cw_min + 1) / 2 - 1);
 		priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 		if (is_legacy)
@@ -591,10 +605,10 @@ static u8 iwl_is_channel_extension(struct iwl_priv *priv,
 
 	if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
 		return !(ch_info->fat_extension_channel &
-					IEEE80211_CHAN_NO_FAT_ABOVE);
+					IEEE80211_CHAN_NO_HT40PLUS);
 	else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
 		return !(ch_info->fat_extension_channel &
-					IEEE80211_CHAN_NO_FAT_BELOW);
+					IEEE80211_CHAN_NO_HT40MINUS);
 
 	return 0;
 }
@@ -605,19 +619,23 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
 	struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
 
 	if ((!iwl_ht_conf->is_ht) ||
-	   (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
-	   (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE))
+	    (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ))
 		return 0;
 
+	/* We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
+	 * the bit will not set if it is pure 40MHz case
+	 */
 	if (sta_ht_inf) {
-		if ((!sta_ht_inf->ht_supported) ||
-		   (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)))
+		if (!sta_ht_inf->ht_supported)
 			return 0;
 	}
 
-	return iwl_is_channel_extension(priv, priv->band,
-					le16_to_cpu(priv->staging_rxon.channel),
-					iwl_ht_conf->extension_chan_offset);
+	if (iwl_ht_conf->ht_protection & IEEE80211_HT_OP_MODE_PROTECTION_20MHZ)
+		return 1;
+	else
+		return iwl_is_channel_extension(priv, priv->band,
+				le16_to_cpu(priv->staging_rxon.channel),
+				iwl_ht_conf->extension_chan_offset);
 }
 EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
 
@@ -735,6 +753,8 @@ int iwl_full_rxon_required(struct iwl_priv *priv)
 	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
 	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
 	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
+	    (priv->staging_rxon.ofdm_ht_triple_stream_basic_rates !=
+	     priv->active_rxon.ofdm_ht_triple_stream_basic_rates) ||
 	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
 		return 1;
 
@@ -785,43 +805,53 @@ EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
 {
 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
-	u32 val;
 
 	if (!ht_info->is_ht) {
-		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
-			RXON_FLG_CHANNEL_MODE_PURE_40_MSK |
+		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
 			RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
 			RXON_FLG_FAT_PROT_MSK |
 			RXON_FLG_HT_PROT_MSK);
 		return;
 	}
 
-	/* Set up channel bandwidth:  20 MHz only, or 20/40 mixed if fat ok */
-	if (iwl_is_fat_tx_allowed(priv, NULL))
-		rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
-	else
-		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
-				 RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
-
-	/* Note: control channel is opposite of extension channel */
-	switch (ht_info->extension_chan_offset) {
-	case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-		rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
-		break;
-	case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-		rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
-		break;
-	case IEEE80211_HT_PARAM_CHA_SEC_NONE:
-	default:
-		rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
-		break;
+	/* FIXME: if the definition of ht_protection changed, the "translation"
+	 * will be needed for rxon->flags
+	 */
+	rxon->flags |= cpu_to_le32(ht_info->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS);
+
+	/* Set up channel bandwidth:
+	 * 20 MHz only, 20/40 mixed or pure 40 if fat ok */
+	/* clear the HT channel mode before set the mode */
+	rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+			 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+	if (iwl_is_fat_tx_allowed(priv, NULL)) {
+		/* pure 40 fat */
+		if (rxon->flags & RXON_FLG_FAT_PROT_MSK)
+			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
+		else {
+			/* Note: control channel is opposite of extension channel */
+			switch (ht_info->extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+			default:
+				/* channel location only valid if in Mixed mode */
+				IWL_ERR(priv, "invalid extension channel offset\n");
+				break;
+			}
+		}
+	} else {
+		rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY;
 	}
 
-	val = ht_info->ht_protection;
-
-	rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
-
-	iwl_set_rxon_chain(priv);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
 
 	IWL_DEBUG_ASSOC(priv, "supported HT rate 0x%X 0x%X 0x%X "
 			"rxon flags 0x%X operation mode :0x%X "
@@ -901,10 +931,11 @@ static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
  * never called for monitor mode. The only way mac80211 informs us about
  * monitor mode is through configuring filters (call to configure_filter).
  */
-static bool iwl_is_monitor_mode(struct iwl_priv *priv)
+bool iwl_is_monitor_mode(struct iwl_priv *priv)
 {
 	return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK);
 }
+EXPORT_SYMBOL(iwl_is_monitor_mode);
 
 /**
  * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
@@ -956,10 +987,10 @@ void iwl_set_rxon_chain(struct iwl_priv *priv)
 	if (iwl_is_monitor_mode(priv) &&
 	    !(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) &&
 	    ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) {
-		rx_chain = 0x07 << RXON_RX_CHAIN_VALID_POS;
-		rx_chain |= 0x06 << RXON_RX_CHAIN_FORCE_SEL_POS;
-		rx_chain |= 0x07 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
-		rx_chain |= 0x01 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+		rx_chain = ANT_ABC << RXON_RX_CHAIN_VALID_POS;
+		rx_chain |= ANT_BC << RXON_RX_CHAIN_FORCE_SEL_POS;
+		rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+		rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
 	}
 
 	priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
@@ -1068,11 +1099,6 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode)
 						  RXON_FILTER_ACCEPT_GRP_MSK;
 		break;
 
-	case NL80211_IFTYPE_MONITOR:
-		priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
-		priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
-		    RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
-		break;
 	default:
 		IWL_ERR(priv, "Unsupported interface type %d\n", mode);
 		break;
@@ -1111,16 +1137,18 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode)
 	priv->staging_rxon.cck_basic_rates =
 	    (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
 
-	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
-					RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
+	/* clear both MIX and PURE40 mode flag */
+	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED |
+					RXON_FLG_CHANNEL_MODE_PURE_40);
 	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
 	memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN);
 	priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff;
 	priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff;
+	priv->staging_rxon.ofdm_ht_triple_stream_basic_rates = 0xff;
 }
 EXPORT_SYMBOL(iwl_connection_init_rx_config);
 
-void iwl_set_rate(struct iwl_priv *priv)
+static void iwl_set_rate(struct iwl_priv *priv)
 {
 	const struct ieee80211_supported_band *hw = NULL;
 	struct ieee80211_rate *rate;
@@ -1166,7 +1194,6 @@ void iwl_set_rate(struct iwl_priv *priv)
 		priv->staging_rxon.ofdm_basic_rates =
 		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
 }
-EXPORT_SYMBOL(iwl_set_rate);
 
 void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 {
@@ -1230,11 +1257,6 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 		IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
 			  "Restarting adapter due to uCode error.\n");
 
-		if (iwl_is_associated(priv)) {
-			memcpy(&priv->recovery_rxon, &priv->active_rxon,
-			       sizeof(priv->recovery_rxon));
-			priv->error_recovering = 1;
-		}
 		if (priv->cfg->mod_params->restart_fw)
 			queue_work(priv->workqueue, &priv->restart);
 	}
@@ -1298,19 +1320,20 @@ int iwl_setup_mac(struct iwl_priv *priv)
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM |
 		    IEEE80211_HW_AMPDU_AGGREGATION |
-		    IEEE80211_HW_SPECTRUM_MGMT |
-		    IEEE80211_HW_SUPPORTS_PS;
+		    IEEE80211_HW_SPECTRUM_MGMT;
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC);
 
 	hw->wiphy->custom_regulatory = true;
-	hw->wiphy->max_scan_ssids = 1;
+
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+	/* we create the 802.11 header and a zero-length SSID element */
+	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
 
-	hw->conf.beacon_int = 100;
 	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
 
 	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
@@ -1357,7 +1380,6 @@ int iwl_init_drv(struct iwl_priv *priv)
 	priv->ibss_beacon = NULL;
 
 	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->power_data.lock);
 	spin_lock_init(&priv->sta_lock);
 	spin_lock_init(&priv->hcmd_lock);
 
@@ -1378,7 +1400,9 @@ int iwl_init_drv(struct iwl_priv *priv)
 	priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
 
 	/* Choose which receivers/antennas to use */
-	iwl_set_rxon_chain(priv);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
 	iwl_init_scan_params(priv);
 
 	iwl_reset_qos(priv);
@@ -1475,11 +1499,273 @@ void iwl_enable_interrupts(struct iwl_priv *priv)
 {
 	IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
 	set_bit(STATUS_INT_ENABLED, &priv->status);
-	iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
+	iwl_write32(priv, CSR_INT_MASK, priv->inta_mask);
 }
 EXPORT_SYMBOL(iwl_enable_interrupts);
 
-irqreturn_t iwl_isr(int irq, void *data)
+
+#define ICT_COUNT (PAGE_SIZE/sizeof(u32))
+
+/* Free dram table */
+void iwl_free_isr_ict(struct iwl_priv *priv)
+{
+	if (priv->ict_tbl_vir) {
+		pci_free_consistent(priv->pci_dev, (sizeof(u32) * ICT_COUNT) +
+					PAGE_SIZE, priv->ict_tbl_vir,
+					priv->ict_tbl_dma);
+		priv->ict_tbl_vir = NULL;
+	}
+}
+EXPORT_SYMBOL(iwl_free_isr_ict);
+
+
+/* allocate dram shared table it is a PAGE_SIZE aligned
+ * also reset all data related to ICT table interrupt.
+ */
+int iwl_alloc_isr_ict(struct iwl_priv *priv)
+{
+
+	if (priv->cfg->use_isr_legacy)
+		return 0;
+	/* allocate shrared data table */
+	priv->ict_tbl_vir = pci_alloc_consistent(priv->pci_dev, (sizeof(u32) *
+						  ICT_COUNT) + PAGE_SIZE,
+						  &priv->ict_tbl_dma);
+	if (!priv->ict_tbl_vir)
+		return -ENOMEM;
+
+	/* align table to PAGE_SIZE boundry */
+	priv->aligned_ict_tbl_dma = ALIGN(priv->ict_tbl_dma, PAGE_SIZE);
+
+	IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n",
+			     (unsigned long long)priv->ict_tbl_dma,
+			     (unsigned long long)priv->aligned_ict_tbl_dma,
+			(int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma));
+
+	priv->ict_tbl =  priv->ict_tbl_vir +
+			  (priv->aligned_ict_tbl_dma - priv->ict_tbl_dma);
+
+	IWL_DEBUG_ISR(priv, "ict vir addr %p vir aligned %p diff %d\n",
+			     priv->ict_tbl, priv->ict_tbl_vir,
+			(int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma));
+
+	/* reset table and index to all 0 */
+	memset(priv->ict_tbl_vir,0, (sizeof(u32) * ICT_COUNT) + PAGE_SIZE);
+	priv->ict_index = 0;
+
+	/* add periodic RX interrupt */
+	priv->inta_mask |= CSR_INT_BIT_RX_PERIODIC;
+	return 0;
+}
+EXPORT_SYMBOL(iwl_alloc_isr_ict);
+
+/* Device is going up inform it about using ICT interrupt table,
+ * also we need to tell the driver to start using ICT interrupt.
+ */
+int iwl_reset_ict(struct iwl_priv *priv)
+{
+	u32 val;
+	unsigned long flags;
+
+	if (!priv->ict_tbl_vir)
+		return 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl_disable_interrupts(priv);
+
+	memset(&priv->ict_tbl[0],0, sizeof(u32) * ICT_COUNT);
+
+	val = priv->aligned_ict_tbl_dma >> PAGE_SHIFT;
+
+	val |= CSR_DRAM_INT_TBL_ENABLE;
+	val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
+
+	IWL_DEBUG_ISR(priv, "CSR_DRAM_INT_TBL_REG =0x%X "
+			"aligned dma address %Lx\n",
+			val, (unsigned long long)priv->aligned_ict_tbl_dma);
+
+	iwl_write32(priv, CSR_DRAM_INT_TBL_REG, val);
+	priv->use_ict = true;
+	priv->ict_index = 0;
+	iwl_write32(priv, CSR_INT, priv->inta_mask);
+	iwl_enable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_reset_ict);
+
+/* Device is going down disable ict interrupt usage */
+void iwl_disable_ict(struct iwl_priv *priv)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->use_ict = false;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+EXPORT_SYMBOL(iwl_disable_ict);
+
+/* interrupt handler using ict table, with this interrupt driver will
+ * stop using INTA register to get device's interrupt, reading this register
+ * is expensive, device will write interrupts in ICT dram table, increment
+ * index then will fire interrupt to driver, driver will OR all ICT table
+ * entries from current index up to table entry with 0 value. the result is
+ * the interrupt we need to service, driver will set the entries back to 0 and
+ * set index.
+ */
+irqreturn_t iwl_isr_ict(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+	u32 val = 0;
+
+	if (!priv)
+		return IRQ_NONE;
+
+	/* dram interrupt table not set yet,
+	 * use legacy interrupt.
+	 */
+	if (!priv->use_ict)
+		return iwl_isr(irq, data);
+
+	spin_lock(&priv->lock);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 * back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here.
+	 */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!priv->ict_tbl[priv->ict_index]) {
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+		goto none;
+	}
+
+	/* read all entries that not 0 start with ict_index */
+	while (priv->ict_tbl[priv->ict_index]) {
+
+		val |= priv->ict_tbl[priv->ict_index];
+		IWL_DEBUG_ISR(priv, "ICT index %d value 0x%08X\n",
+					priv->ict_index,
+					priv->ict_tbl[priv->ict_index]);
+		priv->ict_tbl[priv->ict_index] = 0;
+		priv->ict_index = iwl_queue_inc_wrap(priv->ict_index,
+								ICT_COUNT);
+
+	}
+
+	/* We should not get this value, just ignore it. */
+	if (val == 0xffffffff)
+		val = 0;
+
+	inta = (0xff & val) | ((0xff00 & val) << 16);
+	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
+			inta, inta_mask, val);
+
+	inta &= priv->inta_mask;
+	priv->inta |= inta;
+
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta))
+		tasklet_schedule(&priv->irq_tasklet);
+	else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) {
+		/* Allow interrupt if was disabled by this handler and
+		 * no tasklet was schedules, We should not enable interrupt,
+		 * tasklet will enable it.
+		 */
+		iwl_enable_interrupts(priv);
+	}
+
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service.
+	 * only Re-enable if disabled by irq.
+	 */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+		iwl_enable_interrupts(priv);
+
+	spin_unlock(&priv->lock);
+	return IRQ_NONE;
+}
+EXPORT_SYMBOL(iwl_isr_ict);
+
+
+static irqreturn_t iwl_isr(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u32 inta_fh;
+#endif
+	if (!priv)
+		return IRQ_NONE;
+
+	spin_lock(&priv->lock);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 *    back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here. */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+	/* Discover which interrupts are active/pending */
+	inta = iwl_read32(priv, CSR_INT);
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!inta) {
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+		goto none;
+	}
+
+	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
+		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+		goto unplugged;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (priv->debug_level & (IWL_DL_ISR)) {
+		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+		IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, "
+			      "fh 0x%08x\n", inta, inta_mask, inta_fh);
+	}
+#endif
+
+	priv->inta |= inta;
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta))
+		tasklet_schedule(&priv->irq_tasklet);
+	else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+		iwl_enable_interrupts(priv);
+
+ unplugged:
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service. */
+	/* only Re-enable if diabled by irq  and no schedules tasklet. */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta)
+		iwl_enable_interrupts(priv);
+
+	spin_unlock(&priv->lock);
+	return IRQ_NONE;
+}
+
+irqreturn_t iwl_isr_legacy(int irq, void *data)
 {
 	struct iwl_priv *priv = data;
 	u32 inta, inta_mask;
@@ -1536,7 +1822,7 @@ irqreturn_t iwl_isr(int irq, void *data)
 	spin_unlock(&priv->lock);
 	return IRQ_NONE;
 }
-EXPORT_SYMBOL(iwl_isr);
+EXPORT_SYMBOL(iwl_isr_legacy);
 
 int iwl_send_bt_config(struct iwl_priv *priv)
 {
@@ -1580,10 +1866,6 @@ static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32
 
 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
 		/* read data comes through single port, auto-incr addr */
 		/* NOTE: Use the debugless read so we don't flood kernel log
@@ -1599,8 +1881,6 @@ static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32
 		}
 	}
 
-	iwl_release_nic_access(priv);
-
 	return ret;
 }
 
@@ -1618,10 +1898,6 @@ static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
 
 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret)
-		return ret;
-
 	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
 			   IWL49_RTC_INST_LOWER_BOUND);
 
@@ -1642,8 +1918,6 @@ static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
 		}
 	}
 
-	iwl_release_nic_access(priv);
-
 	if (!errcnt)
 		IWL_DEBUG_INFO(priv,
 		    "ucode image in INSTRUCTION memory is good\n");
@@ -1752,7 +2026,6 @@ void iwl_dump_nic_error_log(struct iwl_priv *priv)
 	u32 data2, line;
 	u32 desc, time, count, base, data1;
 	u32 blink1, blink2, ilink1, ilink2;
-	int ret;
 
 	if (priv->ucode_type == UCODE_INIT)
 		base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
@@ -1764,12 +2037,6 @@ void iwl_dump_nic_error_log(struct iwl_priv *priv)
 		return;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
-
 	count = iwl_read_targ_mem(priv, base);
 
 	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
@@ -1796,7 +2063,6 @@ void iwl_dump_nic_error_log(struct iwl_priv *priv)
 	IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
 		ilink1, ilink2);
 
-	iwl_release_nic_access(priv);
 }
 EXPORT_SYMBOL(iwl_dump_nic_error_log);
 
@@ -1805,7 +2071,6 @@ EXPORT_SYMBOL(iwl_dump_nic_error_log);
 /**
  * iwl_print_event_log - Dump error event log to syslog
  *
- * NOTE: Must be called with iwl_grab_nic_access() already obtained!
  */
 static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
 				u32 num_events, u32 mode)
@@ -1851,7 +2116,6 @@ static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
 
 void iwl_dump_nic_event_log(struct iwl_priv *priv)
 {
-	int ret;
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
 	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
@@ -1869,12 +2133,6 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv)
 		return;
 	}
 
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
-
 	/* event log header */
 	capacity = iwl_read_targ_mem(priv, base);
 	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
@@ -1886,7 +2144,6 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv)
 	/* bail out if nothing in log */
 	if (size == 0) {
 		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		iwl_release_nic_access(priv);
 		return;
 	}
 
@@ -1901,7 +2158,6 @@ void iwl_dump_nic_event_log(struct iwl_priv *priv)
 	/* (then/else) start at top of log */
 	iwl_print_event_log(priv, 0, next_entry, mode);
 
-	iwl_release_nic_access(priv);
 }
 EXPORT_SYMBOL(iwl_dump_nic_event_log);
 
@@ -1954,161 +2210,680 @@ int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
 }
 EXPORT_SYMBOL(iwl_send_card_state);
 
-void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
+void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
+			   struct iwl_rx_mem_buffer *rxb)
 {
-	unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
+	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
+		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
+#endif
+}
+EXPORT_SYMBOL(iwl_rx_pm_sleep_notif);
 
-	if (test_bit(STATUS_RF_KILL_SW, &priv->status))
-		return;
+void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
+				      struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
+			"notification for %s:\n",
+			le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
+	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
+}
+EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
 
-	IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO OFF\n");
+void iwl_rx_reply_error(struct iwl_priv *priv,
+			struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 
-	iwl_scan_cancel(priv);
-	/* FIXME: This is a workaround for AP */
-	if (priv->iw_mode != NL80211_IFTYPE_AP) {
-		spin_lock_irqsave(&priv->lock, flags);
-		iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
-			    CSR_UCODE_SW_BIT_RFKILL);
-		spin_unlock_irqrestore(&priv->lock, flags);
-		/* call the host command only if no hw rf-kill set */
-		if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
-		    iwl_is_ready(priv))
-			iwl_send_card_state(priv,
-				CARD_STATE_CMD_DISABLE, 0);
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-			/* make sure mac80211 stop sending Tx frame */
-		if (priv->mac80211_registered)
-			ieee80211_stop_queues(priv->hw);
-	}
+	IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) "
+		"seq 0x%04X ser 0x%08X\n",
+		le32_to_cpu(pkt->u.err_resp.error_type),
+		get_cmd_string(pkt->u.err_resp.cmd_id),
+		pkt->u.err_resp.cmd_id,
+		le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
+		le32_to_cpu(pkt->u.err_resp.error_info));
 }
-EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
+EXPORT_SYMBOL(iwl_rx_reply_error);
+
+void iwl_clear_isr_stats(struct iwl_priv *priv)
+{
+	memset(&priv->isr_stats, 0, sizeof(priv->isr_stats));
+}
+EXPORT_SYMBOL(iwl_clear_isr_stats);
 
-int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
+int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
+			   const struct ieee80211_tx_queue_params *params)
 {
+	struct iwl_priv *priv = hw->priv;
 	unsigned long flags;
+	int q;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return -EIO;
+	}
 
-	if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
+	if (queue >= AC_NUM) {
+		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
 		return 0;
+	}
 
-	IWL_DEBUG_RF_KILL(priv, "Manual SW RF KILL set to: RADIO ON\n");
+	q = AC_NUM - 1 - queue;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
 
-	/* If the driver is up it will receive CARD_STATE_NOTIFICATION
-	 * notification where it will clear SW rfkill status.
-	 * Setting it here would break the handler. Only if the
-	 * interface is down we can set here since we don't
-	 * receive any further notification.
-	 */
-	if (!priv->is_open)
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
+	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
+	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
+	priv->qos_data.def_qos_parm.ac[q].edca_txop =
+			cpu_to_le16((params->txop * 32));
 
-	/* wake up ucode */
-	msleep(10);
+	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
+	priv->qos_data.qos_active = 1;
+
+	if (priv->iw_mode == NL80211_IFTYPE_AP)
+		iwl_activate_qos(priv, 1);
+	else if (priv->assoc_id && iwl_is_associated(priv))
+		iwl_activate_qos(priv, 0);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_read32(priv, CSR_UCODE_DRV_GP1);
-	if (!iwl_grab_nic_access(priv))
-		iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
-		IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
-				  "disabled by HW switch\n");
-		return 0;
-	}
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return 0;
+}
+EXPORT_SYMBOL(iwl_mac_conf_tx);
+
+static void iwl_ht_conf(struct iwl_priv *priv,
+			    struct ieee80211_bss_conf *bss_conf)
+{
+	struct ieee80211_sta_ht_cap *ht_conf;
+	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
+	struct ieee80211_sta *sta;
+
+	IWL_DEBUG_MAC80211(priv, "enter: \n");
+
+	if (!iwl_conf->is_ht)
+		return;
+
 
-	/* when driver is up while rfkill is on, it wont receive
-	 * any CARD_STATE_NOTIFICATION notifications so we have to
-	 * restart it in here
+	/*
+	 * It is totally wrong to base global information on something
+	 * that is valid only when associated, alas, this driver works
+	 * that way and I don't know how to fix it.
 	 */
-	if (priv->is_open && !test_bit(STATUS_ALIVE, &priv->status)) {
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-		if (!iwl_is_rfkill(priv))
-			queue_work(priv->workqueue, &priv->up);
+
+	rcu_read_lock();
+	sta = ieee80211_find_sta(priv->hw, priv->bssid);
+	if (!sta) {
+		rcu_read_unlock();
+		return;
 	}
+	ht_conf = &sta->ht_cap;
+
+	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
+		iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
+	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
+		iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
 
-	/* If the driver is already loaded, it will receive
-	 * CARD_STATE_NOTIFICATION notifications and the handler will
-	 * call restart to reload the driver.
+	iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
+	iwl_conf->max_amsdu_size =
+		!!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
+
+	iwl_conf->supported_chan_width =
+		!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
+
+	/*
+	 * XXX: The HT configuration needs to be moved into iwl_mac_config()
+	 *	to be done there correctly.
 	 */
-	return 1;
+
+	iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+	if (conf_is_ht40_minus(&priv->hw->conf))
+		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+	else if (conf_is_ht40_plus(&priv->hw->conf))
+		iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+
+	/* If no above or below channel supplied disable FAT channel */
+	if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
+	    iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
+		iwl_conf->supported_chan_width = 0;
+
+	iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
+
+	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
+
+	iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
+	iwl_conf->ht_protection =
+		bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+	iwl_conf->non_GF_STA_present =
+		!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+
+	rcu_read_unlock();
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
-EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);
 
-void iwl_bg_rf_kill(struct work_struct *work)
+#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
+void iwl_bss_info_changed(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif,
+			  struct ieee80211_bss_conf *bss_conf,
+			  u32 changes)
 {
-	struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill);
+	struct iwl_priv *priv = hw->priv;
+	int ret;
 
-	wake_up_interruptible(&priv->wait_command_queue);
+	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
 
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+	if (!iwl_is_alive(priv))
 		return;
 
 	mutex_lock(&priv->mutex);
 
-	if (!iwl_is_rfkill(priv)) {
-		IWL_DEBUG_RF_KILL(priv,
-			  "HW and/or SW RF Kill no longer active, restarting "
-			  "device\n");
-		if (!test_bit(STATUS_EXIT_PENDING, &priv->status) &&
-		    test_bit(STATUS_ALIVE, &priv->status))
-			queue_work(priv->workqueue, &priv->restart);
-	} else {
-		/* make sure mac80211 stop sending Tx frame */
-		if (priv->mac80211_registered)
-			ieee80211_stop_queues(priv->hw);
+	if (changes & BSS_CHANGED_BEACON &&
+	    priv->iw_mode == NL80211_IFTYPE_AP) {
+		dev_kfree_skb(priv->ibss_beacon);
+		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
+	}
+
+	if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) {
+		/* If there is currently a HW scan going on in the background
+		 * then we need to cancel it else the RXON below will fail. */
+		if (iwl_scan_cancel_timeout(priv, 100)) {
+			IWL_WARN(priv, "Aborted scan still in progress "
+				    "after 100ms\n");
+			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
+			mutex_unlock(&priv->mutex);
+			return;
+		}
+		memcpy(priv->staging_rxon.bssid_addr,
+		       bss_conf->bssid, ETH_ALEN);
+
+		/* TODO: Audit driver for usage of these members and see
+		 * if mac80211 deprecates them (priv->bssid looks like it
+		 * shouldn't be there, but I haven't scanned the IBSS code
+		 * to verify) - jpk */
+		memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+
+		if (priv->iw_mode == NL80211_IFTYPE_AP)
+			iwlcore_config_ap(priv);
+		else {
+			int rc = iwlcore_commit_rxon(priv);
+			if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
+				iwl_rxon_add_station(
+					priv, priv->active_rxon.bssid_addr, 1);
+		}
+	} else if (!iwl_is_rfkill(priv)) {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwlcore_commit_rxon(priv);
+	}
+
+	if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+	    changes & BSS_CHANGED_BEACON) {
+		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+		if (beacon)
+			iwl_mac_beacon_update(hw, beacon);
+	}
 
-		if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
-			IWL_DEBUG_RF_KILL(priv, "Can not turn radio back on - "
-					  "disabled by SW switch\n");
+	mutex_unlock(&priv->mutex);
+
+	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
+				   bss_conf->use_short_preamble);
+		if (bss_conf->use_short_preamble)
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
 		else
-			IWL_WARN(priv, "Radio Frequency Kill Switch is On:\n"
-				    "Kill switch must be turned off for "
-				    "wireless networking to work.\n");
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	}
+
+	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
+		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
+		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+	}
+
+	if (changes & BSS_CHANGED_HT) {
+		iwl_ht_conf(priv, bss_conf);
+
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv);
+	}
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
+		/* This should never happen as this function should
+		 * never be called from interrupt context. */
+		if (WARN_ON_ONCE(in_interrupt()))
+			return;
+		if (bss_conf->assoc) {
+			priv->assoc_id = bss_conf->aid;
+			priv->beacon_int = bss_conf->beacon_int;
+			priv->power_data.dtim_period = bss_conf->dtim_period;
+			priv->timestamp = bss_conf->timestamp;
+			priv->assoc_capability = bss_conf->assoc_capability;
+
+			/* we have just associated, don't start scan too early
+			 * leave time for EAPOL exchange to complete
+			 */
+			priv->next_scan_jiffies = jiffies +
+					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
+			mutex_lock(&priv->mutex);
+			priv->cfg->ops->lib->post_associate(priv);
+			mutex_unlock(&priv->mutex);
+		} else {
+			priv->assoc_id = 0;
+			IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
+		}
+	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
+			IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
+			ret = iwl_send_rxon_assoc(priv);
+			if (!ret)
+				/* Sync active_rxon with latest change. */
+				memcpy((void *)&priv->active_rxon,
+					&priv->staging_rxon,
+					sizeof(struct iwl_rxon_cmd));
+	}
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+EXPORT_SYMBOL(iwl_bss_info_changed);
+
+int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+	__le64 timestamp;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return -EIO;
+	}
+
+	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
+		return -EIO;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+
+	priv->ibss_beacon = skb;
+
+	priv->assoc_id = 0;
+	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
+	priv->timestamp = le64_to_cpu(timestamp);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_reset_qos(priv);
+
+	priv->cfg->ops->lib->post_associate(priv);
+
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_mac_beacon_update);
+
+int iwl_set_mode(struct iwl_priv *priv, int mode)
+{
+	if (mode == NL80211_IFTYPE_ADHOC) {
+		const struct iwl_channel_info *ch_info;
+
+		ch_info = iwl_get_channel_info(priv,
+			priv->band,
+			le16_to_cpu(priv->staging_rxon.channel));
+
+		if (!ch_info || !is_channel_ibss(ch_info)) {
+			IWL_ERR(priv, "channel %d not IBSS channel\n",
+				  le16_to_cpu(priv->staging_rxon.channel));
+			return -EINVAL;
+		}
+	}
+
+	iwl_connection_init_rx_config(priv, mode);
+
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
+
+	iwl_clear_stations_table(priv);
+
+	/* dont commit rxon if rf-kill is on*/
+	if (!iwl_is_ready_rf(priv))
+		return -EAGAIN;
+
+	iwlcore_commit_rxon(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_set_mode);
+
+int iwl_mac_add_interface(struct ieee80211_hw *hw,
+				 struct ieee80211_if_init_conf *conf)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+
+	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
+
+	if (priv->vif) {
+		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
+		return -EOPNOTSUPP;
 	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->vif = conf->vif;
+	priv->iw_mode = conf->type;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	mutex_lock(&priv->mutex);
+
+	if (conf->mac_addr) {
+		IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr);
+		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+	}
+
+	if (iwl_set_mode(priv, conf->type) == -EAGAIN)
+		/* we are not ready, will run again when ready */
+		set_bit(STATUS_MODE_PENDING, &priv->status);
+
 	mutex_unlock(&priv->mutex);
-	iwl_rfkill_set_hw_state(priv);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return 0;
 }
-EXPORT_SYMBOL(iwl_bg_rf_kill);
+EXPORT_SYMBOL(iwl_mac_add_interface);
 
-void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
-			   struct iwl_rx_mem_buffer *rxb)
+void iwl_mac_remove_interface(struct ieee80211_hw *hw,
+				     struct ieee80211_if_init_conf *conf)
 {
-#ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
-	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
-		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
-#endif
+	struct iwl_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	mutex_lock(&priv->mutex);
+
+	if (iwl_is_ready_rf(priv)) {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwlcore_commit_rxon(priv);
+	}
+	if (priv->vif == conf->vif) {
+		priv->vif = NULL;
+		memset(priv->bssid, 0, ETH_ALEN);
+	}
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
 }
-EXPORT_SYMBOL(iwl_rx_pm_sleep_notif);
+EXPORT_SYMBOL(iwl_mac_remove_interface);
 
-void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
-				      struct iwl_rx_mem_buffer *rxb)
+/**
+ * iwl_mac_config - mac80211 config callback
+ *
+ * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
+ * be set inappropriately and the driver currently sets the hardware up to
+ * use it whenever needed.
+ */
+int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
-			"notification for %s:\n",
-			le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
-	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
+	struct iwl_priv *priv = hw->priv;
+	const struct iwl_channel_info *ch_info;
+	struct ieee80211_conf *conf = &hw->conf;
+	unsigned long flags = 0;
+	int ret = 0;
+	u16 ch;
+	int scan_active = 0;
+
+	mutex_lock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
+					conf->channel->hw_value, changed);
+
+	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
+			test_bit(STATUS_SCANNING, &priv->status))) {
+		scan_active = 1;
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+	}
+
+
+	/* during scanning mac80211 will delay channel setting until
+	 * scan finish with changed = 0
+	 */
+	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+		if (scan_active)
+			goto set_ch_out;
+
+		ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
+		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
+		if (!is_channel_valid(ch_info)) {
+			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+			!is_channel_ibss(ch_info)) {
+			IWL_ERR(priv, "channel %d in band %d not "
+				"IBSS channel\n",
+				conf->channel->hw_value, conf->channel->band);
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		priv->current_ht_config.is_ht = conf_is_ht(conf);
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+
+		/* if we are switching from ht to 2.4 clear flags
+		 * from any ht related info since 2.4 does not
+		 * support ht */
+		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
+			priv->staging_rxon.flags = 0;
+
+		iwl_set_rxon_channel(priv, conf->channel);
+
+		iwl_set_flags_for_band(priv, conf->channel->band);
+		spin_unlock_irqrestore(&priv->lock, flags);
+ set_ch_out:
+		/* The list of supported rates and rate mask can be different
+		 * for each band; since the band may have changed, reset
+		 * the rate mask to what mac80211 lists */
+		iwl_set_rate(priv);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_PS &&
+	    priv->iw_mode == NL80211_IFTYPE_STATION) {
+		priv->power_data.power_disabled =
+			!(conf->flags & IEEE80211_CONF_PS);
+		ret = iwl_power_update_mode(priv, 0);
+		if (ret)
+			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+			priv->tx_power_user_lmt, conf->power_level);
+
+		iwl_set_tx_power(priv, conf->power_level, false);
+	}
+
+	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		goto out;
+	}
+
+	if (scan_active)
+		goto out;
+
+	if (memcmp(&priv->active_rxon,
+		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
+		iwlcore_commit_rxon(priv);
+	else
+		IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration.\n");
+
+
+out:
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	mutex_unlock(&priv->mutex);
+	return ret;
 }
-EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
+EXPORT_SYMBOL(iwl_mac_config);
 
-void iwl_rx_reply_error(struct iwl_priv *priv,
-			struct iwl_rx_mem_buffer *rxb)
+int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
+			 struct ieee80211_tx_queue_stats *stats)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_priv *priv = hw->priv;
+	int i, avail;
+	struct iwl_tx_queue *txq;
+	struct iwl_queue *q;
+	unsigned long flags;
 
-	IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) "
-		"seq 0x%04X ser 0x%08X\n",
-		le32_to_cpu(pkt->u.err_resp.error_type),
-		get_cmd_string(pkt->u.err_resp.cmd_id),
-		pkt->u.err_resp.cmd_id,
-		le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
-		le32_to_cpu(pkt->u.err_resp.error_info));
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return -EIO;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	for (i = 0; i < AC_NUM; i++) {
+		txq = &priv->txq[i];
+		q = &txq->q;
+		avail = iwl_queue_space(q);
+
+		stats[i].len = q->n_window - avail;
+		stats[i].limit = q->n_window - q->high_mark;
+		stats[i].count = q->n_window;
+
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return 0;
 }
-EXPORT_SYMBOL(iwl_rx_reply_error);
+EXPORT_SYMBOL(iwl_mac_get_tx_stats);
+
+void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	spin_lock_irqsave(&priv->lock, flags);
+	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_reset_qos(priv);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->assoc_id = 0;
+	priv->assoc_capability = 0;
+	priv->assoc_station_added = 0;
+
+	/* new association get rid of ibss beacon skb */
+	if (priv->ibss_beacon)
+		dev_kfree_skb(priv->ibss_beacon);
+
+	priv->ibss_beacon = NULL;
+
+	priv->beacon_int = priv->vif->bss_conf.beacon_int;
+	priv->timestamp = 0;
+	if ((priv->iw_mode == NL80211_IFTYPE_STATION))
+		priv->beacon_int = 0;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	/* we are restarting association process
+	 * clear RXON_FILTER_ASSOC_MSK bit
+	 */
+	if (priv->iw_mode != NL80211_IFTYPE_AP) {
+		iwl_scan_cancel_timeout(priv, 100);
+		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwlcore_commit_rxon(priv);
+	}
+
+	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	iwl_set_rate(priv);
+
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+EXPORT_SYMBOL(iwl_mac_reset_tsf);
+
+#ifdef CONFIG_PM
+
+int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct iwl_priv *priv = pci_get_drvdata(pdev);
+
+	/*
+	 * This function is called when system goes into suspend state
+	 * mac80211 will call iwl_mac_stop() from the mac80211 suspend function
+	 * first but since iwl_mac_stop() has no knowledge of who the caller is,
+	 * it will not call apm_ops.stop() to stop the DMA operation.
+	 * Calling apm_ops.stop here to make sure we stop the DMA.
+	 */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_pci_suspend);
+
+int iwl_pci_resume(struct pci_dev *pdev)
+{
+	struct iwl_priv *priv = pci_get_drvdata(pdev);
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+	pci_restore_state(pdev);
+	iwl_enable_interrupts(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_pci_resume);
 
+#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index a8eac8c3c1f..dabf663e36e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -85,7 +85,10 @@ struct iwl_cmd;
 
 struct iwl_hcmd_ops {
 	int (*rxon_assoc)(struct iwl_priv *priv);
+	int (*commit_rxon)(struct iwl_priv *priv);
+	void (*set_rxon_chain)(struct iwl_priv *priv);
 };
+
 struct iwl_hcmd_utils_ops {
 	u16 (*get_hcmd_size)(u8 cmd_id, u16 len);
 	u16 (*build_addsta_hcmd)(const struct iwl_addsta_cmd *cmd, u8 *data);
@@ -100,6 +103,19 @@ struct iwl_hcmd_utils_ops {
 			  struct iwl_rx_phy_res *rx_resp);
 };
 
+struct iwl_apm_ops {
+	int (*init)(struct iwl_priv *priv);
+	int (*reset)(struct iwl_priv *priv);
+	void (*stop)(struct iwl_priv *priv);
+	void (*config)(struct iwl_priv *priv);
+	int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src);
+};
+
+struct iwl_temp_ops {
+	void (*temperature)(struct iwl_priv *priv);
+	void (*set_ct_kill)(struct iwl_priv *priv);
+};
+
 struct iwl_lib_ops {
 	/* set hw dependent parameters */
 	int (*set_hw_params)(struct iwl_priv *priv);
@@ -137,20 +153,21 @@ struct iwl_lib_ops {
 	int (*is_valid_rtc_data_addr)(u32 addr);
 	/* 1st ucode load */
 	int (*load_ucode)(struct iwl_priv *priv);
-	 /* power management */
-	struct {
-		int (*init)(struct iwl_priv *priv);
-		int (*reset)(struct iwl_priv *priv);
-		void (*stop)(struct iwl_priv *priv);
-		void (*config)(struct iwl_priv *priv);
-		int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src);
-	} apm_ops;
+	/* power management */
+	struct iwl_apm_ops apm_ops;
+
 	/* power */
 	int (*send_tx_power) (struct iwl_priv *priv);
 	void (*update_chain_flags)(struct iwl_priv *priv);
-	void (*temperature) (struct iwl_priv *priv);
+	void (*post_associate) (struct iwl_priv *priv);
+	void (*config_ap) (struct iwl_priv *priv);
+	irqreturn_t (*isr) (int irq, void *data);
+
 	/* eeprom operations (as defined in iwl-eeprom.h) */
 	struct iwl_eeprom_ops eeprom_ops;
+
+	/* temperature */
+	struct iwl_temp_ops temp_ops;
 };
 
 struct iwl_ops {
@@ -160,13 +177,12 @@ struct iwl_ops {
 };
 
 struct iwl_mod_params {
-	int disable;		/* def: 0 = enable radio */
 	int sw_crypto;		/* def: 0 = using hardware encryption */
 	u32 debug;		/* def: 0 = minimal debug log messages */
 	int disable_hw_scan;	/* def: 0 = use h/w scan */
 	int num_of_queues;	/* def: HW dependent */
 	int num_of_ampdu_queues;/* def: HW dependent */
-	int disable_11n;	/* def: 0 = disable 11n capabilities */
+	int disable_11n;	/* def: 0 = 11n capabilities enabled */
 	int amsdu_size_8K;	/* def: 1 = enable 8K amsdu size */
 	int antenna;  		/* def: 0 = both antennas (use diversity) */
 	int restart_fw;		/* def: 1 = restart firmware */
@@ -214,6 +230,7 @@ struct iwl_cfg {
 	u8   valid_tx_ant;
 	u8   valid_rx_ant;
 	bool need_pll_cfg;
+	bool use_isr_legacy;
 };
 
 /***************************
@@ -225,6 +242,8 @@ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
 void iwl_hw_detect(struct iwl_priv *priv);
 void iwl_reset_qos(struct iwl_priv *priv);
 void iwl_activate_qos(struct iwl_priv *priv, u8 force);
+int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
+		    const struct ieee80211_tx_queue_params *params);
 void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt);
 int iwl_check_rxon_cmd(struct iwl_priv *priv);
 int iwl_full_rxon_required(struct iwl_priv *priv);
@@ -249,6 +268,24 @@ int iwl_setup_mac(struct iwl_priv *priv);
 int iwl_set_hw_params(struct iwl_priv *priv);
 int iwl_init_drv(struct iwl_priv *priv);
 void iwl_uninit_drv(struct iwl_priv *priv);
+bool iwl_is_monitor_mode(struct iwl_priv *priv);
+void iwl_post_associate(struct iwl_priv *priv);
+void iwl_bss_info_changed(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *bss_conf,
+				     u32 changes);
+int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb);
+int iwl_commit_rxon(struct iwl_priv *priv);
+int iwl_set_mode(struct iwl_priv *priv, int mode);
+int iwl_mac_add_interface(struct ieee80211_hw *hw,
+				 struct ieee80211_if_init_conf *conf);
+void iwl_mac_remove_interface(struct ieee80211_hw *hw,
+				 struct ieee80211_if_init_conf *conf);
+int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
+void iwl_config_ap(struct iwl_priv *priv);
+int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
+			 struct ieee80211_tx_queue_stats *stats);
+void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
 
 /*****************************************************
  * RX handlers.
@@ -271,10 +308,11 @@ int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
 				  struct iwl_rx_queue *q);
 void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 void iwl_rx_replenish(struct iwl_priv *priv);
+void iwl_rx_replenish_now(struct iwl_priv *priv);
 int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 int iwl_rx_queue_restock(struct iwl_priv *priv);
 int iwl_rx_queue_space(const struct iwl_rx_queue *q);
-void iwl_rx_allocate(struct iwl_priv *priv);
+void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority);
 void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
 int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index);
 /* Handlers */
@@ -310,14 +348,6 @@ int iwl_txq_check_empty(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id);
  ****************************************************/
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force);
 
-/*****************************************************
- * RF -Kill - here and not in iwl-rfkill.h to be available when
- * RF-kill subsystem is not compiled.
- ****************************************************/
-void iwl_bg_rf_kill(struct work_struct *work);
-void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv);
-int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv);
-
 /*******************************************************************************
  * Rate
  ******************************************************************************/
@@ -328,8 +358,6 @@ int iwl_hwrate_to_plcp_idx(u32 rate_n_flags);
 
 u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv);
 
-void iwl_set_rate(struct iwl_priv *priv);
-
 u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant_idx);
 
 static inline u32 iwl_ant_idx_to_flags(u8 ant_idx)
@@ -358,8 +386,8 @@ int iwl_scan_cancel(struct iwl_priv *priv);
 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
 int iwl_scan_initiate(struct iwl_priv *priv);
 int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req);
-u16 iwl_fill_probe_req(struct iwl_priv *priv, enum ieee80211_band band,
-		       struct ieee80211_mgmt *frame, int left);
+u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
+		       const u8 *ie, int ie_len, int left);
 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
 u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
 			      enum ieee80211_band band,
@@ -423,7 +451,13 @@ int iwl_send_card_state(struct iwl_priv *priv, u32 flags,
  *****************************************************/
 void iwl_disable_interrupts(struct iwl_priv *priv);
 void iwl_enable_interrupts(struct iwl_priv *priv);
-irqreturn_t iwl_isr(int irq, void *data);
+irqreturn_t iwl_isr_legacy(int irq, void *data);
+int iwl_reset_ict(struct iwl_priv *priv);
+void iwl_disable_ict(struct iwl_priv *priv);
+int iwl_alloc_isr_ict(struct iwl_priv *priv);
+void iwl_free_isr_ict(struct iwl_priv *priv);
+irqreturn_t iwl_isr_ict(int irq, void *data);
+
 static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
 {
 	int pos;
@@ -432,12 +466,17 @@ static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
 	pci_read_config_word(priv->pci_dev, pos + PCI_EXP_LNKCTL, &pci_lnk_ctl);
 	return pci_lnk_ctl;
 }
+#ifdef CONFIG_PM
+int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state);
+int iwl_pci_resume(struct pci_dev *pdev);
+#endif /* CONFIG_PM */
 
 /*****************************************************
 *  Error Handling Debugging
 ******************************************************/
 void iwl_dump_nic_error_log(struct iwl_priv *priv);
 void iwl_dump_nic_event_log(struct iwl_priv *priv);
+void iwl_clear_isr_stats(struct iwl_priv *priv);
 
 /*****************************************************
 *  GEOS
@@ -451,14 +490,12 @@ void iwlcore_free_geos(struct iwl_priv *priv);
 #define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
 #define STATUS_INT_ENABLED	2
 #define STATUS_RF_KILL_HW	3
-#define STATUS_RF_KILL_SW	4
 #define STATUS_INIT		5
 #define STATUS_ALIVE		6
 #define STATUS_READY		7
 #define STATUS_TEMPERATURE	8
 #define STATUS_GEO_CONFIGURED	9
 #define STATUS_EXIT_PENDING	10
-#define STATUS_IN_SUSPEND	11
 #define STATUS_STATISTICS	12
 #define STATUS_SCANNING		13
 #define STATUS_SCAN_ABORTING	14
@@ -487,11 +524,6 @@ static inline int iwl_is_init(struct iwl_priv *priv)
 	return test_bit(STATUS_INIT, &priv->status);
 }
 
-static inline int iwl_is_rfkill_sw(struct iwl_priv *priv)
-{
-	return test_bit(STATUS_RF_KILL_SW, &priv->status);
-}
-
 static inline int iwl_is_rfkill_hw(struct iwl_priv *priv)
 {
 	return test_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -499,7 +531,7 @@ static inline int iwl_is_rfkill_hw(struct iwl_priv *priv)
 
 static inline int iwl_is_rfkill(struct iwl_priv *priv)
 {
-	return iwl_is_rfkill_hw(priv) || iwl_is_rfkill_sw(priv);
+	return iwl_is_rfkill_hw(priv);
 }
 
 static inline int iwl_is_ready_rf(struct iwl_priv *priv)
@@ -528,7 +560,14 @@ static inline int iwl_send_rxon_assoc(struct iwl_priv *priv)
 {
 	return priv->cfg->ops->hcmd->rxon_assoc(priv);
 }
-
+static inline int iwlcore_commit_rxon(struct iwl_priv *priv)
+{
+	return priv->cfg->ops->hcmd->commit_rxon(priv);
+}
+static inline void iwlcore_config_ap(struct iwl_priv *priv)
+{
+	priv->cfg->ops->lib->config_ap(priv);
+}
 static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
 			struct iwl_priv *priv, enum ieee80211_band band)
 {
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 6e983149b83..f03dae1b2f3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -89,6 +89,7 @@
 /* EEPROM reads */
 #define CSR_EEPROM_REG          (CSR_BASE+0x02c)
 #define CSR_EEPROM_GP           (CSR_BASE+0x030)
+#define CSR_OTP_GP_REG   	(CSR_BASE+0x034)
 #define CSR_GIO_REG		(CSR_BASE+0x03C)
 #define CSR_GP_UCODE		(CSR_BASE+0x044)
 #define CSR_UCODE_DRV_GP1       (CSR_BASE+0x054)
@@ -96,8 +97,10 @@
 #define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
 #define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
 #define CSR_LED_REG             (CSR_BASE+0x094)
+#define CSR_DRAM_INT_TBL_REG	(CSR_BASE+0x0A0)
 #define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
 
+#define CSR_INT_PERIODIC_REG	(CSR_BASE+0x005)
 /* Analog phase-lock-loop configuration  */
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
 /*
@@ -123,16 +126,18 @@
 
 #define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A		(0x00080000)
 #define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM		(0x00200000)
-#define CSR_HW_IF_CONFIG_REG_BIT_PCI_OWN_SEM		(0x00400000)
-#define CSR_HW_IF_CONFIG_REG_BIT_ME_OWN			(0x02000000)
-#define CSR_HW_IF_CONFIG_REG_BIT_WAKE_ME		(0x08000000)
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY		(0x00400000)
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE	(0x02000000)
+#define CSR_HW_IF_CONFIG_REG_PREPARE			(0x08000000)
 
+#define CSR_INT_PERIODIC_DIS			(0x00)
+#define CSR_INT_PERIODIC_ENA			(0xFF)
 
 /* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
  * acknowledged (reset) by host writing "1" to flagged bits. */
 #define CSR_INT_BIT_FH_RX        (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
 #define CSR_INT_BIT_HW_ERR       (1 << 29) /* DMA hardware error FH_INT[31] */
-#define CSR_INT_BIT_DNLD         (1 << 28) /* uCode Download */
+#define CSR_INT_BIT_RX_PERIODIC	 (1 << 28) /* Rx periodic */
 #define CSR_INT_BIT_FH_TX        (1 << 27) /* Tx DMA FH_INT[1:0] */
 #define CSR_INT_BIT_SCD          (1 << 26) /* TXQ pointer advanced */
 #define CSR_INT_BIT_SW_ERR       (1 << 25) /* uCode error */
@@ -226,6 +231,10 @@
 #define CSR_EEPROM_GP_VALID_MSK		(0x00000007)
 #define CSR_EEPROM_GP_BAD_SIGNATURE	(0x00000000)
 #define CSR_EEPROM_GP_IF_OWNER_MSK	(0x00000180)
+#define CSR_OTP_GP_REG_DEVICE_SELECT	(0x00010000) /* 0 - EEPROM, 1 - OTP */
+#define CSR_OTP_GP_REG_OTP_ACCESS_MODE	(0x00020000) /* 0 - absolute, 1 - relative */
+#define CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK          (0x00100000) /* bit 20 */
+#define CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK        (0x00200000) /* bit 21 */
 
 /* CSR GIO */
 #define CSR_GIO_REG_VAL_L0S_ENABLED	(0x00000002)
@@ -251,6 +260,11 @@
 
 /* HPET MEM debug */
 #define CSR_DBG_HPET_MEM_REG_VAL	(0xFFFF0000)
+
+/* DRAM INT TABLE */
+#define CSR_DRAM_INT_TBL_ENABLE		(1 << 31)
+#define CSR_DRAM_INIT_TBL_WRAP_CHECK	(1 << 27)
+
 /*=== HBUS (Host-side Bus) ===*/
 #define HBUS_BASE	(0x400)
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 65d1a7f2db9..2cf014f523b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -68,13 +68,14 @@ struct iwl_debugfs {
 	struct dentry *dir_rf;
 	struct dir_data_files {
 		struct dentry *file_sram;
-		struct dentry *file_eeprom;
+		struct dentry *file_nvm;
 		struct dentry *file_stations;
 		struct dentry *file_rx_statistics;
 		struct dentry *file_tx_statistics;
 		struct dentry *file_log_event;
 		struct dentry *file_channels;
 		struct dentry *file_status;
+		struct dentry *file_interrupt;
 	} dbgfs_data_files;
 	struct dir_rf_files {
 		struct dentry *file_disable_sensitivity;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 64eb585f157..11e08c06891 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -172,7 +172,6 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
 	const size_t bufsz = sizeof(buf);
 
-	iwl_grab_nic_access(priv);
 	for (i = priv->dbgfs->sram_len; i > 0; i -= 4) {
 		val = iwl_read_targ_mem(priv, priv->dbgfs->sram_offset + \
 					priv->dbgfs->sram_len - i);
@@ -192,7 +191,6 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 		pos += scnprintf(buf + pos, bufsz - pos, "0x%08x ", val);
 	}
 	pos += scnprintf(buf + pos, bufsz - pos, "\n");
-	iwl_release_nic_access(priv);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	return ret;
@@ -292,7 +290,7 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf,
 	return ret;
 }
 
-static ssize_t iwl_dbgfs_eeprom_read(struct file *file,
+static ssize_t iwl_dbgfs_nvm_read(struct file *file,
 				       char __user *user_buf,
 				       size_t count,
 				       loff_t *ppos)
@@ -306,7 +304,7 @@ static ssize_t iwl_dbgfs_eeprom_read(struct file *file,
 	buf_size = 4 * eeprom_len + 256;
 
 	if (eeprom_len % 16) {
-		IWL_ERR(priv, "EEPROM size is not multiple of 16.\n");
+		IWL_ERR(priv, "NVM size is not multiple of 16.\n");
 		return -ENODATA;
 	}
 
@@ -318,6 +316,13 @@ static ssize_t iwl_dbgfs_eeprom_read(struct file *file,
 	}
 
 	ptr = priv->eeprom;
+	if (!ptr) {
+		IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+		return -ENOMEM;
+	}
+	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
+			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+			? "OTP" : "EEPROM");
 	for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) {
 		pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs);
 		hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos,
@@ -375,51 +380,53 @@ static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf,
 	}
 
 	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ);
-	channels = supp_band->channels;
-
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"Displaying %d channels in 2.4GHz band 802.11bg):\n",
-			 supp_band->n_channels);
+	if (supp_band) {
+		channels = supp_band->channels;
 
-	for (i = 0; i < supp_band->n_channels; i++)
 		pos += scnprintf(buf + pos, bufsz - pos,
-				"%d: %ddBm: BSS%s%s, %s.\n",
-				ieee80211_frequency_to_channel(
-				channels[i].center_freq),
-				channels[i].max_power,
-				channels[i].flags & IEEE80211_CHAN_RADAR ?
-				" (IEEE 802.11h required)" : "",
-				(!(channels[i].flags & IEEE80211_CHAN_NO_IBSS)
-				|| (channels[i].flags &
-				IEEE80211_CHAN_RADAR)) ? "" :
-				", IBSS",
-				channels[i].flags &
-				IEEE80211_CHAN_PASSIVE_SCAN ?
-				"passive only" : "active/passive");
+				"Displaying %d channels in 2.4GHz band 802.11bg):\n",
+				supp_band->n_channels);
 
+		for (i = 0; i < supp_band->n_channels; i++)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					"%d: %ddBm: BSS%s%s, %s.\n",
+					ieee80211_frequency_to_channel(
+					channels[i].center_freq),
+					channels[i].max_power,
+					channels[i].flags & IEEE80211_CHAN_RADAR ?
+					" (IEEE 802.11h required)" : "",
+					((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+					|| (channels[i].flags &
+					IEEE80211_CHAN_RADAR)) ? "" :
+					", IBSS",
+					channels[i].flags &
+					IEEE80211_CHAN_PASSIVE_SCAN ?
+					"passive only" : "active/passive");
+	}
 	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ);
-	channels = supp_band->channels;
-
-	pos += scnprintf(buf + pos, bufsz - pos,
-			"Displaying %d channels in 5.2GHz band (802.11a)\n",
-			supp_band->n_channels);
+	if (supp_band) {
+		channels = supp_band->channels;
 
-	for (i = 0; i < supp_band->n_channels; i++)
 		pos += scnprintf(buf + pos, bufsz - pos,
-				"%d: %ddBm: BSS%s%s, %s.\n",
-				ieee80211_frequency_to_channel(
-				channels[i].center_freq),
-				channels[i].max_power,
-				channels[i].flags & IEEE80211_CHAN_RADAR ?
-				" (IEEE 802.11h required)" : "",
-				((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
-				|| (channels[i].flags &
-				IEEE80211_CHAN_RADAR)) ? "" :
-				", IBSS",
-				channels[i].flags &
-				IEEE80211_CHAN_PASSIVE_SCAN ?
-				"passive only" : "active/passive");
+				"Displaying %d channels in 5.2GHz band (802.11a)\n",
+				supp_band->n_channels);
 
+		for (i = 0; i < supp_band->n_channels; i++)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					"%d: %ddBm: BSS%s%s, %s.\n",
+					ieee80211_frequency_to_channel(
+					channels[i].center_freq),
+					channels[i].max_power,
+					channels[i].flags & IEEE80211_CHAN_RADAR ?
+					" (IEEE 802.11h required)" : "",
+					((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+					|| (channels[i].flags &
+					IEEE80211_CHAN_RADAR)) ? "" :
+					", IBSS",
+					channels[i].flags &
+					IEEE80211_CHAN_PASSIVE_SCAN ?
+					"passive only" : "active/passive");
+	}
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
 	return ret;
@@ -442,8 +449,6 @@ static ssize_t iwl_dbgfs_status_read(struct file *file,
 		test_bit(STATUS_INT_ENABLED, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n",
 		test_bit(STATUS_RF_KILL_HW, &priv->status));
-	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_SW:\t %d\n",
-		test_bit(STATUS_RF_KILL_SW, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INIT:\t\t %d\n",
 		test_bit(STATUS_INIT, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n",
@@ -456,8 +461,6 @@ static ssize_t iwl_dbgfs_status_read(struct file *file,
 		test_bit(STATUS_GEO_CONFIGURED, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n",
 		test_bit(STATUS_EXIT_PENDING, &priv->status));
-	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_IN_SUSPEND:\t %d\n",
-		test_bit(STATUS_IN_SUSPEND, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n",
 		test_bit(STATUS_STATISTICS, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n",
@@ -475,14 +478,104 @@ static ssize_t iwl_dbgfs_status_read(struct file *file,
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
+static ssize_t iwl_dbgfs_interrupt_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	int pos = 0;
+	int cnt = 0;
+	char *buf;
+	int bufsz = 24 * 64; /* 24 items * 64 char per item */
+	ssize_t ret;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf) {
+		IWL_ERR(priv, "Can not allocate Buffer\n");
+		return -ENOMEM;
+	}
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"Interrupt Statistics Report:\n");
+
+	pos += scnprintf(buf + pos, bufsz - pos, "HW Error:\t\t\t %u\n",
+		priv->isr_stats.hw);
+	pos += scnprintf(buf + pos, bufsz - pos, "SW Error:\t\t\t %u\n",
+		priv->isr_stats.sw);
+	if (priv->isr_stats.sw > 0) {
+		pos += scnprintf(buf + pos, bufsz - pos,
+			"\tLast Restarting Code:  0x%X\n",
+			priv->isr_stats.sw_err);
+	}
+#ifdef CONFIG_IWLWIFI_DEBUG
+	pos += scnprintf(buf + pos, bufsz - pos, "Frame transmitted:\t\t %u\n",
+		priv->isr_stats.sch);
+	pos += scnprintf(buf + pos, bufsz - pos, "Alive interrupt:\t\t %u\n",
+		priv->isr_stats.alive);
+#endif
+	pos += scnprintf(buf + pos, bufsz - pos,
+		"HW RF KILL switch toggled:\t %u\n",
+		priv->isr_stats.rfkill);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "CT KILL:\t\t\t %u\n",
+		priv->isr_stats.ctkill);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Wakeup Interrupt:\t\t %u\n",
+		priv->isr_stats.wakeup);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+		"Rx command responses:\t\t %u\n",
+		priv->isr_stats.rx);
+	for (cnt = 0; cnt < REPLY_MAX; cnt++) {
+		if (priv->isr_stats.rx_handlers[cnt] > 0)
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"\tRx handler[%36s]:\t\t %u\n",
+				get_cmd_string(cnt),
+				priv->isr_stats.rx_handlers[cnt]);
+	}
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Tx/FH interrupt:\t\t %u\n",
+		priv->isr_stats.tx);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Unexpected INTA:\t\t %u\n",
+		priv->isr_stats.unhandled);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_interrupt_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	u32 reset_flag;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%x", &reset_flag) != 1)
+		return -EFAULT;
+	if (reset_flag == 0)
+		iwl_clear_isr_stats(priv);
+
+	return count;
+}
+
+
 DEBUGFS_READ_WRITE_FILE_OPS(sram);
 DEBUGFS_WRITE_FILE_OPS(log_event);
-DEBUGFS_READ_FILE_OPS(eeprom);
+DEBUGFS_READ_FILE_OPS(nvm);
 DEBUGFS_READ_FILE_OPS(stations);
 DEBUGFS_READ_FILE_OPS(rx_statistics);
 DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_FILE_OPS(channels);
 DEBUGFS_READ_FILE_OPS(status);
+DEBUGFS_READ_WRITE_FILE_OPS(interrupt);
 
 /*
  * Create the debugfs files and directories
@@ -510,7 +603,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 
 	DEBUGFS_ADD_DIR(data, dbgfs->dir_drv);
 	DEBUGFS_ADD_DIR(rf, dbgfs->dir_drv);
-	DEBUGFS_ADD_FILE(eeprom, data);
+	DEBUGFS_ADD_FILE(nvm, data);
 	DEBUGFS_ADD_FILE(sram, data);
 	DEBUGFS_ADD_FILE(log_event, data);
 	DEBUGFS_ADD_FILE(stations, data);
@@ -518,6 +611,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(tx_statistics, data);
 	DEBUGFS_ADD_FILE(channels, data);
 	DEBUGFS_ADD_FILE(status, data);
+	DEBUGFS_ADD_FILE(interrupt, data);
 	DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal);
 	DEBUGFS_ADD_BOOL(disable_chain_noise, rf,
 			 &priv->disable_chain_noise_cal);
@@ -540,7 +634,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	if (!priv->dbgfs)
 		return;
 
-	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_eeprom);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_nvm);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_rx_statistics);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_tx_statistics);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_sram);
@@ -548,6 +642,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_stations);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_channels);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_status);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_interrupt);
 	DEBUGFS_REMOVE(priv->dbgfs->dir_data);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_chain_noise);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index cf7f0db58fc..e2d620f0b6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -41,7 +41,6 @@
 #include "iwl-prph.h"
 #include "iwl-fh.h"
 #include "iwl-debug.h"
-#include "iwl-rfkill.h"
 #include "iwl-4965-hw.h"
 #include "iwl-3945-hw.h"
 #include "iwl-3945-led.h"
@@ -289,11 +288,11 @@ struct iwl_frame {
 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
 
 enum {
-	/* CMD_SIZE_NORMAL = 0, */
+	CMD_SYNC = 0,
+	CMD_SIZE_NORMAL = 0,
+	CMD_NO_SKB = 0,
 	CMD_SIZE_HUGE = (1 << 0),
-	/* CMD_SYNC = 0, */
 	CMD_ASYNC = (1 << 1),
-	/* CMD_NO_SKB = 0, */
 	CMD_WANT_SKB = (1 << 2),
 };
 
@@ -381,6 +380,7 @@ struct iwl_rx_queue {
 	u32 read;
 	u32 write;
 	u32 free_count;
+	u32 write_actual;
 	struct list_head rx_free;
 	struct list_head rx_used;
 	int need_update;
@@ -498,22 +498,13 @@ struct iwl_qos_info {
 #define STA_PS_STATUS_WAKE             0
 #define STA_PS_STATUS_SLEEP            1
 
-struct iwl3945_tid_data {
-	u16 seq_number;
-};
-
-struct iwl3945_hw_key {
-	enum ieee80211_key_alg alg;
-	int keylen;
-	u8 key[32];
-};
 
 struct iwl3945_station_entry {
 	struct iwl3945_addsta_cmd sta;
-	struct iwl3945_tid_data tid[MAX_TID_COUNT];
+	struct iwl_tid_data tid[MAX_TID_COUNT];
 	u8 used;
 	u8 ps_status;
-	struct iwl3945_hw_key keyinfo;
+	struct iwl_hw_key keyinfo;
 };
 
 struct iwl_station_entry {
@@ -822,6 +813,26 @@ enum {
 	MEASUREMENT_ACTIVE = (1 << 1),
 };
 
+enum iwl_nvm_type {
+	NVM_DEVICE_TYPE_EEPROM = 0,
+	NVM_DEVICE_TYPE_OTP,
+};
+
+/* interrupt statistics */
+struct isr_statistics {
+	u32 hw;
+	u32 sw;
+	u32 sw_err;
+	u32 sch;
+	u32 alive;
+	u32 rfkill;
+	u32 ctkill;
+	u32 wakeup;
+	u32 rx;
+	u32 rx_handlers[REPLY_MAX];
+	u32 tx;
+	u32 unhandled;
+};
 
 #define IWL_MAX_NUM_QUEUES	20 /* FIXME: do dynamic allocation */
 
@@ -877,15 +888,14 @@ struct iwl_priv {
 	unsigned long scan_start_tsf;
 	void *scan;
 	int scan_bands;
-	int one_direct_scan;
-	u8 direct_ssid_len;
-	u8 direct_ssid[IW_ESSID_MAX_SIZE];
+	struct cfg80211_scan_request *scan_request;
 	u8 scan_tx_ant[IEEE80211_NUM_BANDS];
 	u8 mgmt_tx_ant;
 
 	/* spinlock */
 	spinlock_t lock;	/* protect general shared data */
 	spinlock_t hcmd_lock;	/* protect hcmd */
+	spinlock_t reg_lock;	/* protect hw register access */
 	struct mutex mutex;
 
 	/* basic pci-network driver stuff */
@@ -919,16 +929,12 @@ struct iwl_priv {
 	const struct iwl_rxon_cmd active_rxon;
 	struct iwl_rxon_cmd staging_rxon;
 
-	int error_recovering;
 	struct iwl_rxon_cmd recovery_rxon;
 
 	/* 1st responses from initialize and runtime uCode images.
 	 * 4965's initialize alive response contains some calibration data. */
 	struct iwl_init_alive_resp card_alive_init;
 	struct iwl_alive_resp card_alive;
-#if defined(CONFIG_IWLWIFI_RFKILL)
-	struct rfkill *rfkill;
-#endif
 
 #ifdef CONFIG_IWLWIFI_LEDS
 	unsigned long last_blink_time;
@@ -978,6 +984,9 @@ struct iwl_priv {
 		u64 bytes;
 	} tx_stats[3], rx_stats[3];
 
+	/* counts interrupts */
+	struct isr_statistics isr_stats;
+
 	struct iwl_power_mgr power_data;
 
 	struct iwl_notif_statistics statistics;
@@ -1017,6 +1026,7 @@ struct iwl_priv {
 
 	/* eeprom */
 	u8 *eeprom;
+	int    nvm_device_type;
 	struct iwl_eeprom_calib_info *calib_info;
 
 	enum nl80211_iftype iw_mode;
@@ -1034,7 +1044,16 @@ struct iwl_priv {
 	/*End*/
 	struct iwl_hw_params hw_params;
 
+	/* INT ICT Table */
+	u32 *ict_tbl;
+	dma_addr_t ict_tbl_dma;
+	dma_addr_t aligned_ict_tbl_dma;
+	int ict_index;
+	void *ict_tbl_vir;
+	u32 inta;
+	bool use_ict;
 
+	u32 inta_mask;
 	/* Current association information needed to configure the
 	 * hardware */
 	u16 assoc_id;
@@ -1049,7 +1068,6 @@ struct iwl_priv {
 	struct work_struct calibrated_work;
 	struct work_struct scan_completed;
 	struct work_struct rx_replenish;
-	struct work_struct rf_kill;
 	struct work_struct abort_scan;
 	struct work_struct update_link_led;
 	struct work_struct auth_work;
@@ -1059,7 +1077,6 @@ struct iwl_priv {
 
 	struct tasklet_struct irq_tasklet;
 
-	struct delayed_work set_power_save;
 	struct delayed_work init_alive_start;
 	struct delayed_work alive_start;
 	struct delayed_work scan_check;
@@ -1090,14 +1107,12 @@ struct iwl_priv {
 	u32 disable_tx_power_cal;
 	struct work_struct run_time_calib_work;
 	struct timer_list statistics_periodic;
-
+	bool hw_ready;
 	/*For 3945*/
 #define IWL_DEFAULT_TX_POWER 0x0F
 
 	struct iwl3945_notif_statistics statistics_39;
 
-	struct iwl3945_station_entry stations_39[IWL_STATION_COUNT];
-
 	u32 sta_supp_rates;
 }; /*iwl_priv */
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 75517d05df0..7d7554a2f34 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -152,6 +152,32 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);
 
+static int iwlcore_get_nvm_type(struct iwl_priv *priv)
+{
+	u32 otpgp;
+	int nvm_type;
+
+	/* OTP only valid for CP/PP and after */
+	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+	case CSR_HW_REV_TYPE_3945:
+	case CSR_HW_REV_TYPE_4965:
+	case CSR_HW_REV_TYPE_5300:
+	case CSR_HW_REV_TYPE_5350:
+	case CSR_HW_REV_TYPE_5100:
+	case CSR_HW_REV_TYPE_5150:
+		nvm_type = NVM_DEVICE_TYPE_EEPROM;
+		break;
+	default:
+		otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+		if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
+			nvm_type = NVM_DEVICE_TYPE_OTP;
+		else
+			nvm_type = NVM_DEVICE_TYPE_EEPROM;
+		break;
+	}
+	return  nvm_type;
+}
+
 /*
  * The device's EEPROM semaphore prevents conflicts between driver and uCode
  * when accessing the EEPROM; each access is a series of pulses to/from the
@@ -198,6 +224,31 @@ const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
 }
 EXPORT_SYMBOL(iwlcore_eeprom_query_addr);
 
+static int iwl_init_otp_access(struct iwl_priv *priv)
+{
+	int ret;
+
+	/* Enable 40MHz radio clock */
+	_iwl_write32(priv, CSR_GP_CNTRL,
+		     _iwl_read32(priv, CSR_GP_CNTRL) |
+		     CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+	/* wait for clock to be ready */
+	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
+				  CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+				  25000);
+	if (ret < 0)
+		IWL_ERR(priv, "Time out access OTP\n");
+	else {
+		iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
+				  APMG_PS_CTRL_VAL_RESET_REQ);
+		udelay(5);
+		iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
+				    APMG_PS_CTRL_VAL_RESET_REQ);
+	}
+	return ret;
+}
+
 /**
  * iwl_eeprom_init - read EEPROM contents
  *
@@ -209,11 +260,18 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 {
 	u16 *e;
 	u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
-	int sz = priv->cfg->eeprom_size;
+	int sz;
 	int ret;
 	u16 addr;
+	u32 otpgp;
+
+	priv->nvm_device_type = iwlcore_get_nvm_type(priv);
 
 	/* allocate eeprom */
+	if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+		priv->cfg->eeprom_size =
+			OTP_BLOCK_SIZE * OTP_LOWER_BLOCKS_TOTAL;
+	sz = priv->cfg->eeprom_size;
 	priv->eeprom = kzalloc(sz, GFP_KERNEL);
 	if (!priv->eeprom) {
 		ret = -ENOMEM;
@@ -235,30 +293,77 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		ret = -ENOENT;
 		goto err;
 	}
-
-	/* eeprom is an array of 16bit values */
-	for (addr = 0; addr < sz; addr += sizeof(u16)) {
-		u32 r;
-
-		_iwl_write32(priv, CSR_EEPROM_REG,
-			     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-
-		ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
-					  CSR_EEPROM_REG_READ_VALID_MSK,
-					  IWL_EEPROM_ACCESS_TIMEOUT);
-		if (ret < 0) {
-			IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
-			goto done;
+	if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
+		ret = iwl_init_otp_access(priv);
+		if (ret) {
+			IWL_ERR(priv, "Failed to initialize OTP access.\n");
+			ret = -ENOENT;
+			goto err;
+		}
+		_iwl_write32(priv, CSR_EEPROM_GP,
+			     iwl_read32(priv, CSR_EEPROM_GP) &
+			     ~CSR_EEPROM_GP_IF_OWNER_MSK);
+		/* clear */
+		_iwl_write32(priv, CSR_OTP_GP_REG,
+			     iwl_read32(priv, CSR_OTP_GP_REG) |
+			     CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
+			     CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
+
+		for (addr = 0; addr < sz; addr += sizeof(u16)) {
+			u32 r;
+
+			_iwl_write32(priv, CSR_EEPROM_REG,
+				     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+
+			ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+						  CSR_EEPROM_REG_READ_VALID_MSK,
+						  IWL_EEPROM_ACCESS_TIMEOUT);
+			if (ret < 0) {
+				IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
+				goto done;
+			}
+			r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+			/* check for ECC errors: */
+			otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+			if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
+				/* stop in this case */
+				IWL_ERR(priv, "Uncorrectable OTP ECC error, Abort OTP read\n");
+				goto done;
+			}
+			if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
+				/* continue in this case */
+				_iwl_write32(priv, CSR_OTP_GP_REG,
+					     iwl_read32(priv, CSR_OTP_GP_REG) |
+					     CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
+				IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
+			}
+			e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
+		}
+	} else {
+		/* eeprom is an array of 16bit values */
+		for (addr = 0; addr < sz; addr += sizeof(u16)) {
+			u32 r;
+
+			_iwl_write32(priv, CSR_EEPROM_REG,
+				     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+
+			ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+						  CSR_EEPROM_REG_READ_VALID_MSK,
+						  IWL_EEPROM_ACCESS_TIMEOUT);
+			if (ret < 0) {
+				IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
+				goto done;
+			}
+			r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+			e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
 		}
-		r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
-		e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
 	}
 	ret = 0;
 done:
 	priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv);
 err:
 	if (ret)
-		kfree(priv->eeprom);
+		iwl_eeprom_free(priv);
 alloc_err:
 	return ret;
 }
@@ -285,7 +390,7 @@ int iwl_eeprom_check_version(struct iwl_priv *priv)
 
 	return 0;
 err:
-	IWL_ERR(priv, "Unsupported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
+	IWL_ERR(priv, "Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
 		  eeprom_ver, priv->cfg->eeprom_ver,
 		  calib_ver,  priv->cfg->eeprom_calib_ver);
 	return -EINVAL;
@@ -301,6 +406,8 @@ EXPORT_SYMBOL(iwl_eeprom_query_addr);
 
 u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
 {
+	if (!priv->eeprom)
+		return 0;
 	return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
 }
 EXPORT_SYMBOL(iwl_eeprom_query16);
@@ -481,8 +588,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 			/* First write that fat is not enabled, and then enable
 			 * one by one */
 			ch_info->fat_extension_channel =
-				(IEEE80211_CHAN_NO_FAT_ABOVE |
-				 IEEE80211_CHAN_NO_FAT_BELOW);
+				(IEEE80211_CHAN_NO_HT40PLUS |
+				 IEEE80211_CHAN_NO_HT40MINUS);
 
 			if (!(is_channel_valid(ch_info))) {
 				IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
@@ -561,7 +668,7 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 				fat_extension_chan = 0;
 			else
 				fat_extension_chan =
-					IEEE80211_CHAN_NO_FAT_BELOW;
+					IEEE80211_CHAN_NO_HT40MINUS;
 
 			/* Set up driver's info for lower half */
 			iwl_set_fat_chan_info(priv, ieeeband,
@@ -573,7 +680,7 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 			iwl_set_fat_chan_info(priv, ieeeband,
 						(eeprom_ch_index[ch] + 4),
 						&(eeprom_ch_info[ch]),
-						IEEE80211_CHAN_NO_FAT_ABOVE);
+						IEEE80211_CHAN_NO_HT40PLUS);
 		}
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 3479153d96c..195b4ef12c2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -179,6 +179,10 @@ struct iwl_eeprom_channel {
 #define EEPROM_5050_TX_POWER_VERSION    (4)
 #define EEPROM_5050_EEPROM_VERSION	(0x21E)
 
+/* OTP */
+#define OTP_LOWER_BLOCKS_TOTAL		(3)
+#define OTP_BLOCK_SIZE			(0x400)
+
 /* 2.4 GHz */
 extern const u8 iwl_eeprom_band_1[14];
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index 083ea1ffbe8..d30cb0275d1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -131,9 +131,23 @@ static inline void __iwl_set_bit(const char *f, u32 l,
 	IWL_DEBUG_IO(priv, "set_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
 	_iwl_write32(priv, reg, val);
 }
-#define iwl_set_bit(p, r, m) __iwl_set_bit(__FILE__, __LINE__, p, r, m)
+static inline void iwl_set_bit(struct iwl_priv *p, u32 r, u32 m)
+{
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&p->reg_lock, reg_flags);
+	__iwl_set_bit(__FILE__, __LINE__, p, r, m);
+	spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
 #else
-#define iwl_set_bit(p, r, m) _iwl_set_bit(p, r, m)
+static inline void iwl_set_bit(struct iwl_priv *p, u32 r, u32 m)
+{
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&p->reg_lock, reg_flags);
+	_iwl_set_bit(p, r, m);
+	spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
 #endif
 
 static inline void _iwl_clear_bit(struct iwl_priv *priv, u32 reg, u32 mask)
@@ -148,19 +162,30 @@ static inline void __iwl_clear_bit(const char *f, u32 l,
 	IWL_DEBUG_IO(priv, "clear_bit(0x%08X, 0x%08X) = 0x%08X\n", reg, mask, val);
 	_iwl_write32(priv, reg, val);
 }
-#define iwl_clear_bit(p, r, m) __iwl_clear_bit(__FILE__, __LINE__, p, r, m)
+static inline void iwl_clear_bit(struct iwl_priv *p, u32 r, u32 m)
+{
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&p->reg_lock, reg_flags);
+	__iwl_clear_bit(__FILE__, __LINE__, p, r, m);
+	spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
 #else
-#define iwl_clear_bit(p, r, m) _iwl_clear_bit(p, r, m)
+static inline void iwl_clear_bit(struct iwl_priv *p, u32 r, u32 m)
+{
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&p->reg_lock, reg_flags);
+	_iwl_clear_bit(p, r, m);
+	spin_unlock_irqrestore(&p->reg_lock, reg_flags);
+}
 #endif
 
 static inline int _iwl_grab_nic_access(struct iwl_priv *priv)
 {
 	int ret;
 	u32 val;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (atomic_read(&priv->restrict_refcnt))
-		return 0;
-#endif
+
 	/* this bit wakes up the NIC */
 	_iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 	ret = _iwl_poll_bit(priv, CSR_GP_CNTRL,
@@ -170,12 +195,10 @@ static inline int _iwl_grab_nic_access(struct iwl_priv *priv)
 	if (ret < 0) {
 		val = _iwl_read32(priv, CSR_GP_CNTRL);
 		IWL_ERR(priv, "MAC is in deep sleep!.  CSR_GP_CNTRL = 0x%08X\n", val);
+		_iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI);
 		return -EIO;
 	}
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-	atomic_inc(&priv->restrict_refcnt);
-#endif
 	return 0;
 }
 
@@ -183,9 +206,6 @@ static inline int _iwl_grab_nic_access(struct iwl_priv *priv)
 static inline int __iwl_grab_nic_access(const char *f, u32 l,
 					       struct iwl_priv *priv)
 {
-	if (atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Grabbing access while already held %s %d.\n", f, l);
-
 	IWL_DEBUG_IO(priv, "grabbing nic access - %s %d\n", f, l);
 	return _iwl_grab_nic_access(priv);
 }
@@ -198,18 +218,13 @@ static inline int __iwl_grab_nic_access(const char *f, u32 l,
 
 static inline void _iwl_release_nic_access(struct iwl_priv *priv)
 {
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (atomic_dec_and_test(&priv->restrict_refcnt))
-#endif
-		_iwl_clear_bit(priv, CSR_GP_CNTRL,
-			       CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+	_iwl_clear_bit(priv, CSR_GP_CNTRL,
+			CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 }
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline void __iwl_release_nic_access(const char *f, u32 l,
 					    struct iwl_priv *priv)
 {
-	if (atomic_read(&priv->restrict_refcnt) <= 0)
-		IWL_ERR(priv, "Release unheld nic access at line %s %d.\n", f, l);
 
 	IWL_DEBUG_IO(priv, "releasing nic access - %s %d\n", f, l);
 	_iwl_release_nic_access(priv);
@@ -230,16 +245,37 @@ static inline u32 __iwl_read_direct32(const char *f, u32 l,
 					struct iwl_priv *priv, u32 reg)
 {
 	u32 value = _iwl_read_direct32(priv, reg);
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s %d\n", f, l);
 	IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d \n", reg, value,
 		     f, l);
 	return value;
 }
-#define iwl_read_direct32(priv, reg) \
-	__iwl_read_direct32(__FILE__, __LINE__, priv, reg)
+static inline u32 iwl_read_direct32(struct iwl_priv *priv, u32 reg)
+{
+	u32 value;
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+	value = __iwl_read_direct32(__FILE__, __LINE__, priv, reg);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return value;
+}
+
 #else
-#define iwl_read_direct32 _iwl_read_direct32
+static inline u32 iwl_read_direct32(struct iwl_priv *priv, u32 reg)
+{
+	u32 value;
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+	value = _iwl_read_direct32(priv, reg);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return value;
+
+}
 #endif
 
 static inline void _iwl_write_direct32(struct iwl_priv *priv,
@@ -247,19 +283,17 @@ static inline void _iwl_write_direct32(struct iwl_priv *priv,
 {
 	_iwl_write32(priv, reg, value);
 }
-#ifdef CONFIG_IWLWIFI_DEBUG
-static void __iwl_write_direct32(const char *f , u32 line,
-				   struct iwl_priv *priv, u32 reg, u32 value)
+static inline void iwl_write_direct32(struct iwl_priv *priv, u32 reg, u32 value)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
-	_iwl_write_direct32(priv, reg, value);
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (!iwl_grab_nic_access(priv)) {
+		_iwl_write_direct32(priv, reg, value);
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
-#define iwl_write_direct32(priv, reg, value) \
-	__iwl_write_direct32(__func__, __LINE__, priv, reg, value)
-#else
-#define iwl_write_direct32 _iwl_write_direct32
-#endif
 
 static inline void iwl_write_reg_buf(struct iwl_priv *priv,
 					       u32 reg, u32 len, u32 *values)
@@ -268,14 +302,23 @@ static inline void iwl_write_reg_buf(struct iwl_priv *priv,
 
 	if ((priv != NULL) && (values != NULL)) {
 		for (; 0 < len; len -= count, reg += count, values++)
-			_iwl_write_direct32(priv, reg, *values);
+			iwl_write_direct32(priv, reg, *values);
 	}
 }
 
 static inline int _iwl_poll_direct_bit(struct iwl_priv *priv, u32 addr,
 				       u32 mask, int timeout)
 {
-	return _iwl_poll_bit(priv, addr, mask, mask, timeout);
+	int t = 0;
+
+	do {
+		if ((iwl_read_direct32(priv, addr) & mask) == mask)
+			return t;
+		udelay(IWL_POLL_INTERVAL);
+		t += IWL_POLL_INTERVAL;
+	} while (t < timeout);
+
+	return -ETIMEDOUT;
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -305,20 +348,18 @@ static inline u32 _iwl_read_prph(struct iwl_priv *priv, u32 reg)
 	rmb();
 	return _iwl_read_direct32(priv, HBUS_TARG_PRPH_RDAT);
 }
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline u32 __iwl_read_prph(const char *f, u32 line,
-				  struct iwl_priv *priv, u32 reg)
+static inline u32 iwl_read_prph(struct iwl_priv *priv, u32 reg)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
-	return _iwl_read_prph(priv, reg);
-}
+	unsigned long reg_flags;
+	u32 val;
 
-#define iwl_read_prph(priv, reg) \
-	__iwl_read_prph(__func__, __LINE__, priv, reg)
-#else
-#define iwl_read_prph _iwl_read_prph
-#endif
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+	val = _iwl_read_prph(priv, reg);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return val;
+}
 
 static inline void _iwl_write_prph(struct iwl_priv *priv,
 					     u32 addr, u32 val)
@@ -328,83 +369,107 @@ static inline void _iwl_write_prph(struct iwl_priv *priv,
 	wmb();
 	_iwl_write_direct32(priv, HBUS_TARG_PRPH_WDAT, val);
 }
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_write_prph(const char *f, u32 line,
-				    struct iwl_priv *priv, u32 addr, u32 val)
+
+static inline void iwl_write_prph(struct iwl_priv *priv, u32 addr, u32 val)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
-	_iwl_write_prph(priv, addr, val);
-}
+	unsigned long reg_flags;
 
-#define iwl_write_prph(priv, addr, val) \
-	__iwl_write_prph(__func__, __LINE__, priv, addr, val);
-#else
-#define iwl_write_prph _iwl_write_prph
-#endif
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (!iwl_grab_nic_access(priv)) {
+		_iwl_write_prph(priv, addr, val);
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+}
 
 #define _iwl_set_bits_prph(priv, reg, mask) \
 	_iwl_write_prph(priv, reg, (_iwl_read_prph(priv, reg) | mask))
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_set_bits_prph(const char *f, u32 line,
-				       struct iwl_priv *priv,
-				       u32 reg, u32 mask)
+
+static inline void iwl_set_bits_prph(struct iwl_priv *priv, u32 reg, u32 mask)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
+	unsigned long reg_flags;
 
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
 	_iwl_set_bits_prph(priv, reg, mask);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
-#define iwl_set_bits_prph(priv, reg, mask) \
-	__iwl_set_bits_prph(__func__, __LINE__, priv, reg, mask)
-#else
-#define iwl_set_bits_prph _iwl_set_bits_prph
-#endif
 
 #define _iwl_set_bits_mask_prph(priv, reg, bits, mask) \
 	_iwl_write_prph(priv, reg, ((_iwl_read_prph(priv, reg) & mask) | bits))
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-static inline void __iwl_set_bits_mask_prph(const char *f, u32 line,
-		struct iwl_priv *priv, u32 reg, u32 bits, u32 mask)
+static inline void iwl_set_bits_mask_prph(struct iwl_priv *priv, u32 reg,
+				u32 bits, u32 mask)
 {
-	if (!atomic_read(&priv->restrict_refcnt))
-		IWL_ERR(priv, "Nic access not held from %s line %d\n", f, line);
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
 	_iwl_set_bits_mask_prph(priv, reg, bits, mask);
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
-#define iwl_set_bits_mask_prph(priv, reg, bits, mask) \
-	__iwl_set_bits_mask_prph(__func__, __LINE__, priv, reg, bits, mask)
-#else
-#define iwl_set_bits_mask_prph _iwl_set_bits_mask_prph
-#endif
 
 static inline void iwl_clear_bits_prph(struct iwl_priv
 						 *priv, u32 reg, u32 mask)
 {
-	u32 val = _iwl_read_prph(priv, reg);
+	unsigned long reg_flags;
+	u32 val;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+	val = _iwl_read_prph(priv, reg);
 	_iwl_write_prph(priv, reg, (val & ~mask));
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
 
 static inline u32 iwl_read_targ_mem(struct iwl_priv *priv, u32 addr)
 {
-	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, addr);
+	unsigned long reg_flags;
+	u32 value;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+
+	_iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, addr);
 	rmb();
-	return iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+	value = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+	return value;
 }
 
 static inline void iwl_write_targ_mem(struct iwl_priv *priv, u32 addr, u32 val)
 {
-	iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
-	wmb();
-	iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, val);
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (!iwl_grab_nic_access(priv)) {
+		_iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
+		wmb();
+		_iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, val);
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
 
 static inline void iwl_write_targ_mem_buf(struct iwl_priv *priv, u32 addr,
 					  u32 len, u32 *values)
 {
-	iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
-	wmb();
-	for (; 0 < len; len -= sizeof(u32), values++)
-		iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, *values);
+	unsigned long reg_flags;
+
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	if (!iwl_grab_nic_access(priv)) {
+		_iwl_write_direct32(priv, HBUS_TARG_MEM_WADDR, addr);
+		wmb();
+		for (; 0 < len; len -= sizeof(u32), values++)
+			_iwl_write_direct32(priv, HBUS_TARG_MEM_WDAT, *values);
+
+		iwl_release_nic_access(priv);
+	}
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
 }
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 19680f72087..5e64252f80f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -176,10 +176,6 @@ static int iwl_led_associate(struct iwl_priv *priv, int led_id)
 static int iwl_led_disassociate(struct iwl_priv *priv, int led_id)
 {
 	priv->allow_blinking = 0;
-	if (iwl_is_rfkill(priv))
-		iwl4965_led_off_reg(priv, led_id);
-	else
-		iwl4965_led_on_reg(priv, led_id);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 47c894530eb..f2ea3f05f6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -41,38 +41,33 @@
 #include "iwl-power.h"
 
 /*
- * Setting power level allow the card to go to sleep when not busy
- * there are three factor that decide the power level to go to, they
- * are list here with its priority
- *  1- critical_power_setting this will be set according to card temperature.
- *  2- system_power_setting this will be set by system PM manager.
- *  3- user_power_setting this will be set by user either by writing to sys or
- *  	mac80211
+ * Setting power level allow the card to go to sleep when not busy.
  *
- * if system_power_setting and user_power_setting is set to auto
- * the power level will be decided according to association status and battery
- * status.
+ * The power level is set to INDEX_1 (the least deep state) by
+ * default, and will, in the future, be the deepest state unless
+ * otherwise required by pm_qos network latency requirements.
  *
+ * Using INDEX_1 without pm_qos is ok because mac80211 will disable
+ * PS when even checking every beacon for the TIM bit would exceed
+ * the required latency.
  */
 
-#define MSEC_TO_USEC 1024
 #define IWL_POWER_RANGE_0_MAX  (2)
 #define IWL_POWER_RANGE_1_MAX  (10)
 
 
-
-#define IWL_POWER_ON_BATTERY		IWL_POWER_INDEX_5
-#define IWL_POWER_ON_AC_DISASSOC	IWL_POWER_MODE_CAM
-#define IWL_POWER_ON_AC_ASSOC		IWL_POWER_MODE_CAM
-
-
-#define IWL_CT_KILL_TEMPERATURE		110
-#define IWL_MIN_POWER_TEMPERATURE	100
-#define IWL_REDUCED_POWER_TEMPERATURE	95
-
+#define NOSLP cpu_to_le16(0), 0, 0
+#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
+#define TU_TO_USEC 1024
+#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
+#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
+				     cpu_to_le32(X1), \
+				     cpu_to_le32(X2), \
+				     cpu_to_le32(X3), \
+				     cpu_to_le32(X4)}
 /* default power management (not Tx power) table values */
-/* for TIM  0-10 */
-static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
+/* for DTIM period 0 through IWL_POWER_RANGE_0_MAX */
+static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
@@ -82,8 +77,8 @@ static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = {
 };
 
 
-/* for TIM = 3-10 */
-static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
+/* for DTIM period IWL_POWER_RANGE_0_MAX + 1 through IWL_POWER_RANGE_1_MAX */
+static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
@@ -92,8 +87,8 @@ static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = {
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
 };
 
-/* for TIM > 11 */
-static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = {
+/* for DTIM period > IWL_POWER_RANGE_1_MAX */
+static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
 	{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
@@ -106,39 +101,15 @@ static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = {
 /* set card power command */
 static int iwl_set_power(struct iwl_priv *priv, void *cmd)
 {
-	return iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD,
-				      sizeof(struct iwl_powertable_cmd),
-				      cmd, NULL);
-}
-/* decide the right power level according to association status
- * and battery status
- */
-static u16 iwl_get_auto_power_mode(struct iwl_priv *priv)
-{
-	u16 mode;
-
-	switch (priv->power_data.user_power_setting) {
-	case IWL_POWER_AUTO:
-		/* if running on battery */
-		if (priv->power_data.is_battery_active)
-			mode = IWL_POWER_ON_BATTERY;
-		else if (iwl_is_associated(priv))
-			mode = IWL_POWER_ON_AC_ASSOC;
-		else
-			mode = IWL_POWER_ON_AC_DISASSOC;
-		break;
-	default:
-		mode = priv->power_data.user_power_setting;
-		break;
-	}
-	return mode;
+	return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
+				sizeof(struct iwl_powertable_cmd), cmd);
 }
 
 /* initialize to default */
 static void iwl_power_init_handle(struct iwl_priv *priv)
 {
 	struct iwl_power_mgr *pow_data;
-	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX;
+	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_NUM;
 	struct iwl_powertable_cmd *cmd;
 	int i;
 	u16 lctl;
@@ -157,7 +128,7 @@ static void iwl_power_init_handle(struct iwl_priv *priv)
 
 	IWL_DEBUG_POWER(priv, "adjust power command flags\n");
 
-	for (i = 0; i < IWL_POWER_MAX; i++) {
+	for (i = 0; i < IWL_POWER_NUM; i++) {
 		cmd = &pow_data->pwr_range_0[i].cmd;
 
 		if (lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN)
@@ -247,33 +218,12 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
 			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
 
-	/* If on battery, set to 3,
-	 * if plugged into AC power, set to CAM ("continuously aware mode"),
-	 * else user level */
-
-	switch (setting->system_power_setting) {
-	case IWL_POWER_SYS_AUTO:
-		final_mode = iwl_get_auto_power_mode(priv);
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		final_mode = IWL_POWER_INDEX_3;
-		break;
-	case IWL_POWER_SYS_AC:
-		final_mode = IWL_POWER_MODE_CAM;
-		break;
-	default:
-		final_mode = IWL_POWER_INDEX_3;
-		WARN_ON(1);
-	}
-
-	if (setting->critical_power_setting > final_mode)
-		final_mode = setting->critical_power_setting;
+	final_mode = priv->power_data.user_power_setting;
 
-	/* driver only support CAM for non STA network */
-	if (priv->iw_mode != NL80211_IFTYPE_STATION)
+	if (setting->power_disabled)
 		final_mode = IWL_POWER_MODE_CAM;
 
-	if (iwl_is_ready_rf(priv) && !setting->power_disabled &&
+	if (iwl_is_ready_rf(priv) &&
 	    ((setting->power_mode != final_mode) || force)) {
 		struct iwl_powertable_cmd cmd;
 
@@ -290,8 +240,6 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 
 		if (final_mode == IWL_POWER_MODE_CAM)
 			clear_bit(STATUS_POWER_PMI, &priv->status);
-		else
-			set_bit(STATUS_POWER_PMI, &priv->status);
 
 		if (priv->cfg->ops->lib->update_chain_flags && update_chains)
 			priv->cfg->ops->lib->update_chain_flags(priv);
@@ -307,51 +255,10 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 }
 EXPORT_SYMBOL(iwl_power_update_mode);
 
-/* Allow other iwl code to disable/enable power management active
- * this will be useful for rate scale to disable PM during heavy
- * Tx/Rx activities
- */
-int iwl_power_disable_management(struct iwl_priv *priv, u32 ms)
-{
-	u16 prev_mode;
-	int ret = 0;
-
-	if (priv->power_data.power_disabled)
-		return -EBUSY;
-
-	prev_mode = priv->power_data.user_power_setting;
-	priv->power_data.user_power_setting = IWL_POWER_MODE_CAM;
-	ret = iwl_power_update_mode(priv, 0);
-	priv->power_data.power_disabled = 1;
-	priv->power_data.user_power_setting = prev_mode;
-	cancel_delayed_work(&priv->set_power_save);
-	if (ms)
-		queue_delayed_work(priv->workqueue, &priv->set_power_save,
-				   msecs_to_jiffies(ms));
-
-
-	return ret;
-}
-EXPORT_SYMBOL(iwl_power_disable_management);
-
-/* Allow other iwl code to disable/enable power management active
- * this will be useful for rate scale to disable PM during high
- * volume activities
- */
-int iwl_power_enable_management(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	priv->power_data.power_disabled = 0;
-	ret = iwl_power_update_mode(priv, 0);
-	return ret;
-}
-EXPORT_SYMBOL(iwl_power_enable_management);
-
 /* set user_power_setting */
 int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
 {
-	if (mode > IWL_POWER_MAX)
+	if (mode >= IWL_POWER_NUM)
 		return -EINVAL;
 
 	priv->power_data.user_power_setting = mode;
@@ -360,86 +267,12 @@ int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
 }
 EXPORT_SYMBOL(iwl_power_set_user_mode);
 
-/* set system_power_setting. This should be set by over all
- * PM application.
- */
-int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode)
-{
-	if (mode < IWL_POWER_SYS_MAX)
-		priv->power_data.system_power_setting = mode;
-	else
-		return -EINVAL;
-	return iwl_power_update_mode(priv, 0);
-}
-EXPORT_SYMBOL(iwl_power_set_system_mode);
-
 /* initialize to default */
 void iwl_power_initialize(struct iwl_priv *priv)
 {
 	iwl_power_init_handle(priv);
-	priv->power_data.user_power_setting = IWL_POWER_AUTO;
-	priv->power_data.system_power_setting = IWL_POWER_SYS_AUTO;
-	priv->power_data.power_disabled = 0;
-	priv->power_data.is_battery_active = 0;
-	priv->power_data.critical_power_setting = 0;
+	priv->power_data.user_power_setting = IWL_POWER_INDEX_1;
+	/* default to disabled until mac80211 says otherwise */
+	priv->power_data.power_disabled = 1;
 }
 EXPORT_SYMBOL(iwl_power_initialize);
-
-/* set critical_power_setting according to temperature value */
-int iwl_power_temperature_change(struct iwl_priv *priv)
-{
-	int ret = 0;
-	s32 temperature = KELVIN_TO_CELSIUS(priv->last_temperature);
-	u16 new_critical = priv->power_data.critical_power_setting;
-
-	if (temperature > IWL_CT_KILL_TEMPERATURE)
-		return 0;
-	else if (temperature > IWL_MIN_POWER_TEMPERATURE)
-		new_critical = IWL_POWER_INDEX_5;
-	else if (temperature > IWL_REDUCED_POWER_TEMPERATURE)
-		new_critical = IWL_POWER_INDEX_3;
-	else
-		new_critical = IWL_POWER_MODE_CAM;
-
-	if (new_critical != priv->power_data.critical_power_setting)
-		priv->power_data.critical_power_setting = new_critical;
-
-	if (priv->power_data.critical_power_setting >
-				priv->power_data.power_mode)
-		ret = iwl_power_update_mode(priv, 0);
-
-	return ret;
-}
-EXPORT_SYMBOL(iwl_power_temperature_change);
-
-static void iwl_bg_set_power_save(struct work_struct *work)
-{
-	struct iwl_priv *priv = container_of(work,
-				struct iwl_priv, set_power_save.work);
-	IWL_DEBUG_POWER(priv, "update power\n");
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-
-	/* on starting association we disable power management
-	 * until association, if association failed then this
-	 * timer will expire and enable PM again.
-	 */
-	if (!iwl_is_associated(priv))
-		iwl_power_enable_management(priv);
-
-	mutex_unlock(&priv->mutex);
-}
-void iwl_setup_power_deferred_work(struct iwl_priv *priv)
-{
-	INIT_DELAYED_WORK(&priv->set_power_save, iwl_bg_set_power_save);
-}
-EXPORT_SYMBOL(iwl_setup_power_deferred_work);
-
-void iwl_power_cancel_timeout(struct iwl_priv *priv)
-{
-	cancel_delayed_work(&priv->set_power_save);
-}
-EXPORT_SYMBOL(iwl_power_cancel_timeout);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index 18963392121..37ba3bb7a25 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -40,56 +40,29 @@ enum {
 	IWL_POWER_INDEX_3,
 	IWL_POWER_INDEX_4,
 	IWL_POWER_INDEX_5,
-	IWL_POWER_AUTO,
-	IWL_POWER_MAX = IWL_POWER_AUTO,
+	IWL_POWER_NUM
 };
 
-enum {
-	IWL_POWER_SYS_AUTO,
-	IWL_POWER_SYS_AC,
-	IWL_POWER_SYS_BATTERY,
-	IWL_POWER_SYS_MAX,
-};
-
-
 /* Power management (not Tx power) structures */
 
-#define NOSLP cpu_to_le16(0), 0, 0
-#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
-#define SLP_TOUT(T) cpu_to_le32((T) * MSEC_TO_USEC)
-#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
-				     cpu_to_le32(X1), \
-				     cpu_to_le32(X2), \
-				     cpu_to_le32(X3), \
-				     cpu_to_le32(X4)}
 struct iwl_power_vec_entry {
 	struct iwl_powertable_cmd cmd;
 	u8 no_dtim;
 };
 
 struct iwl_power_mgr {
-	spinlock_t lock;
-	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_MAX];
-	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_MAX];
-	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_MAX];
+	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_NUM];
+	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_NUM];
+	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_NUM];
 	u32 dtim_period;
 	/* final power level that used to calculate final power command */
 	u8 power_mode;
-	u8 user_power_setting; /* set by user through mac80211 or sysfs */
-	u8 system_power_setting; /* set by kernel system tools */
-	u8 critical_power_setting; /* set if driver over heated */
-	u8 is_battery_active; /* DC/AC power */
-	u8 power_disabled; /* flag to disable using power saving level */
+	u8 user_power_setting; /* set by user through sysfs */
+	u8 power_disabled; /* set by mac80211's CONF_PS */
 };
 
-void iwl_setup_power_deferred_work(struct iwl_priv *priv);
-void iwl_power_cancel_timeout(struct iwl_priv *priv);
 int iwl_power_update_mode(struct iwl_priv *priv, bool force);
-int iwl_power_disable_management(struct iwl_priv *priv, u32 ms);
-int iwl_power_enable_management(struct iwl_priv *priv);
 int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode);
-int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode);
 void iwl_power_initialize(struct iwl_priv *priv);
-int iwl_power_temperature_change(struct iwl_priv *priv);
 
 #endif  /* __iwl_power_setting_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
deleted file mode 100644
index 2ad9faf1508..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <net/mac80211.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-
-/* software rf-kill from user */
-static int iwl_rfkill_soft_rf_kill(void *data, enum rfkill_state state)
-{
-	struct iwl_priv *priv = data;
-	int err = 0;
-
-	if (!priv->rfkill)
-		return 0;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return 0;
-
-	IWL_DEBUG_RF_KILL(priv, "we received soft RFKILL set to state %d\n", state);
-	mutex_lock(&priv->mutex);
-
-	switch (state) {
-	case RFKILL_STATE_UNBLOCKED:
-		if (iwl_is_rfkill_hw(priv)) {
-			err = -EBUSY;
-			goto out_unlock;
-		}
-		iwl_radio_kill_sw_enable_radio(priv);
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		iwl_radio_kill_sw_disable_radio(priv);
-		break;
-	default:
-		IWL_WARN(priv, "we received unexpected RFKILL state %d\n",
-			state);
-		break;
-	}
-out_unlock:
-	mutex_unlock(&priv->mutex);
-
-	return err;
-}
-
-int iwl_rfkill_init(struct iwl_priv *priv)
-{
-	struct device *device = wiphy_dev(priv->hw->wiphy);
-	int ret = 0;
-
-	BUG_ON(device == NULL);
-
-	IWL_DEBUG_RF_KILL(priv, "Initializing RFKILL.\n");
-	priv->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN);
-	if (!priv->rfkill) {
-		IWL_ERR(priv, "Unable to allocate RFKILL device.\n");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	priv->rfkill->name = priv->cfg->name;
-	priv->rfkill->data = priv;
-	priv->rfkill->state = RFKILL_STATE_UNBLOCKED;
-	priv->rfkill->toggle_radio = iwl_rfkill_soft_rf_kill;
-	priv->rfkill->user_claim_unsupported = 1;
-
-	priv->rfkill->dev.class->suspend = NULL;
-	priv->rfkill->dev.class->resume = NULL;
-
-	ret = rfkill_register(priv->rfkill);
-	if (ret) {
-		IWL_ERR(priv, "Unable to register RFKILL: %d\n", ret);
-		goto free_rfkill;
-	}
-
-	IWL_DEBUG_RF_KILL(priv, "RFKILL initialization complete.\n");
-	return ret;
-
-free_rfkill:
-	if (priv->rfkill != NULL)
-		rfkill_free(priv->rfkill);
-	priv->rfkill = NULL;
-
-error:
-	IWL_DEBUG_RF_KILL(priv, "RFKILL initialization complete.\n");
-	return ret;
-}
-EXPORT_SYMBOL(iwl_rfkill_init);
-
-void iwl_rfkill_unregister(struct iwl_priv *priv)
-{
-
-	if (priv->rfkill)
-		rfkill_unregister(priv->rfkill);
-
-	priv->rfkill = NULL;
-}
-EXPORT_SYMBOL(iwl_rfkill_unregister);
-
-/* set RFKILL to the right state. */
-void iwl_rfkill_set_hw_state(struct iwl_priv *priv)
-{
-	if (!priv->rfkill)
-		return;
-
-	if (iwl_is_rfkill_hw(priv)) {
-		rfkill_force_state(priv->rfkill, RFKILL_STATE_HARD_BLOCKED);
-		return;
-	}
-
-	if (!iwl_is_rfkill_sw(priv))
-		rfkill_force_state(priv->rfkill, RFKILL_STATE_UNBLOCKED);
-	else
-		rfkill_force_state(priv->rfkill, RFKILL_STATE_SOFT_BLOCKED);
-}
-EXPORT_SYMBOL(iwl_rfkill_set_hw_state);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.h b/drivers/net/wireless/iwlwifi/iwl-rfkill.h
deleted file mode 100644
index 633dafb4bf1..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-#ifndef __iwl_rf_kill_h__
-#define __iwl_rf_kill_h__
-
-struct iwl_priv;
-
-#include <linux/rfkill.h>
-
-#ifdef CONFIG_IWLWIFI_RFKILL
-
-void iwl_rfkill_set_hw_state(struct iwl_priv *priv);
-void iwl_rfkill_unregister(struct iwl_priv *priv);
-int iwl_rfkill_init(struct iwl_priv *priv);
-#else
-static inline void iwl_rfkill_set_hw_state(struct iwl_priv *priv) {}
-static inline void iwl_rfkill_unregister(struct iwl_priv *priv) {}
-static inline int iwl_rfkill_init(struct iwl_priv *priv) { return 0; }
-#endif
-
-
-
-#endif  /* __iwl_rf_kill_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 8f65908f66f..2b8d40b37a1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -145,18 +145,14 @@ int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q)
 			goto exit_unlock;
 		}
 
-		ret = iwl_grab_nic_access(priv);
-		if (ret)
-			goto exit_unlock;
-
-		/* Device expects a multiple of 8 */
-		iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write & ~0x7);
-		iwl_release_nic_access(priv);
+		q->write_actual = (q->write & ~0x7);
+		iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual);
 
 	/* Else device is assumed to be awake */
 	} else {
 		/* Device expects a multiple of 8 */
-		iwl_write32(priv, rx_wrt_ptr_reg, q->write & ~0x7);
+		q->write_actual = (q->write & ~0x7);
+		iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual);
 	}
 
 	q->need_update = 0;
@@ -218,7 +214,7 @@ int iwl_rx_queue_restock(struct iwl_priv *priv)
 
 	/* If we've added more space for the firmware to place data, tell it.
 	 * Increment device's write pointer in multiples of 8. */
-	if (write != (rxq->write & ~0x7)) {
+	if (rxq->write_actual != (rxq->write & ~0x7)) {
 		spin_lock_irqsave(&rxq->lock, flags);
 		rxq->need_update = 1;
 		spin_unlock_irqrestore(&rxq->lock, flags);
@@ -238,7 +234,7 @@ EXPORT_SYMBOL(iwl_rx_queue_restock);
  * Also restock the Rx queue via iwl_rx_queue_restock.
  * This is called as a scheduled work item (except for during initialization)
  */
-void iwl_rx_allocate(struct iwl_priv *priv)
+void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 {
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
@@ -260,7 +256,8 @@ void iwl_rx_allocate(struct iwl_priv *priv)
 
 		/* Alloc a new receive buffer */
 		rxb->skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
-				     GFP_KERNEL);
+						priority);
+
 		if (!rxb->skb) {
 			IWL_CRIT(priv, "Can not allocate SKB buffers\n");
 			/* We don't reschedule replenish work here -- we will
@@ -295,7 +292,7 @@ void iwl_rx_replenish(struct iwl_priv *priv)
 {
 	unsigned long flags;
 
-	iwl_rx_allocate(priv);
+	iwl_rx_allocate(priv, GFP_KERNEL);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl_rx_queue_restock(priv);
@@ -303,6 +300,14 @@ void iwl_rx_replenish(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_rx_replenish);
 
+void iwl_rx_replenish_now(struct iwl_priv *priv)
+{
+	iwl_rx_allocate(priv, GFP_ATOMIC);
+
+	iwl_rx_queue_restock(priv);
+}
+EXPORT_SYMBOL(iwl_rx_replenish_now);
+
 
 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
@@ -358,6 +363,7 @@ int iwl_rx_queue_alloc(struct iwl_priv *priv)
 	/* Set us so that we have processed and used all buffers, but have
 	 * not restocked the Rx queue with fresh buffers */
 	rxq->read = rxq->write = 0;
+	rxq->write_actual = 0;
 	rxq->free_count = 0;
 	rxq->need_update = 0;
 	return 0;
@@ -396,6 +402,7 @@ void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 	/* Set us so that we have processed and used all buffers, but have
 	 * not restocked the Rx queue with fresh buffers */
 	rxq->read = rxq->write = 0;
+	rxq->write_actual = 0;
 	rxq->free_count = 0;
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
@@ -403,18 +410,12 @@ EXPORT_SYMBOL(iwl_rx_queue_reset);
 
 int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 {
-	int ret;
-	unsigned long flags;
 	u32 rb_size;
 	const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
-	const u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT why this stalls RX */
+	u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
 
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (ret) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
+	if (!priv->cfg->use_isr_legacy)
+		rb_timeout = RX_RB_TIMEOUT;
 
 	if (priv->cfg->mod_params->amsdu_size_8K)
 		rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
@@ -452,35 +453,19 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 			   (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
 			   (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
 
-	iwl_release_nic_access(priv);
-
 	iwl_write32(priv, CSR_INT_COALESCING, 0x40);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 
 int iwl_rxq_stop(struct iwl_priv *priv)
 {
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (unlikely(ret)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return ret;
-	}
 
 	/* stop Rx DMA */
 	iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 	iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
 			    FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
 
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	return 0;
 }
 EXPORT_SYMBOL(iwl_rxq_stop);
@@ -582,8 +567,8 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 
 	iwl_leds_background(priv);
 
-	if (priv->cfg->ops->lib->temperature && change)
-		priv->cfg->ops->lib->temperature(priv);
+	if (priv->cfg->ops->lib->temp_ops.temperature && change)
+		priv->cfg->ops->lib->temp_ops.temperature(priv);
 }
 EXPORT_SYMBOL(iwl_rx_statistics);
 
@@ -1102,13 +1087,6 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 	if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
 		rx_status.flag |= RX_FLAG_SHORTPRE;
 
-	/* Take shortcut when only in monitor mode */
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
-		iwl_pass_packet_to_mac80211(priv, include_phy,
-						 rxb, &rx_status);
-		return;
-	}
-
 	network_packet = iwl_is_network_packet(priv, header);
 	if (network_packet) {
 		priv->last_rx_rssi = rx_status.signal;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 6330b91e37c..e26875dbe85 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -445,13 +445,6 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 	unsigned long flags;
 	struct iwl_priv *priv = hw->priv;
 	int ret;
-	u8 *ssid = NULL;
-	size_t ssid_len = 0;
-
-	if (req->n_ssids) {
-		ssid = req->ssids[0].ssid;
-		ssid_len = req->ssids[0].ssid_len;
-	}
 
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
@@ -485,13 +478,7 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 		goto out_unlock;
 	}
 
-	if (ssid_len) {
-		priv->one_direct_scan = 1;
-		priv->direct_ssid_len =  ssid_len;
-		memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
-	} else {
-		priv->one_direct_scan = 0;
-	}
+	priv->scan_request = req;
 
 	ret = iwl_scan_initiate(priv);
 
@@ -530,73 +517,14 @@ void iwl_bg_scan_check(struct work_struct *data)
 EXPORT_SYMBOL(iwl_bg_scan_check);
 
 /**
- * iwl_supported_rate_to_ie - fill in the supported rate in IE field
- *
- * return : set the bit for each supported rate insert in ie
- */
-static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
-				    u16 basic_rate, int *left)
-{
-	u16 ret_rates = 0, bit;
-	int i;
-	u8 *cnt = ie;
-	u8 *rates = ie + 1;
-
-	for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
-		if (bit & supported_rate) {
-			ret_rates |= bit;
-			rates[*cnt] = iwl_rates[i].ieee |
-				((bit & basic_rate) ? 0x80 : 0x00);
-			(*cnt)++;
-			(*left)--;
-			if ((*left <= 0) ||
-			    (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
-				break;
-		}
-	}
-
-	return ret_rates;
-}
-
-
-static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
-			     u8 *pos, int *left)
-{
-	struct ieee80211_ht_cap *ht_cap;
-
-	if (!sband || !sband->ht_cap.ht_supported)
-		return;
-
-	if (*left < sizeof(struct ieee80211_ht_cap))
-		return;
-
-	*pos++ = sizeof(struct ieee80211_ht_cap);
-	ht_cap = (struct ieee80211_ht_cap *) pos;
-
-	ht_cap->cap_info = cpu_to_le16(sband->ht_cap.cap);
-	memcpy(&ht_cap->mcs, &sband->ht_cap.mcs, 16);
-	ht_cap->ampdu_params_info =
-		(sband->ht_cap.ampdu_factor & IEEE80211_HT_AMPDU_PARM_FACTOR) |
-		((sband->ht_cap.ampdu_density << 2) &
-			IEEE80211_HT_AMPDU_PARM_DENSITY);
-	*left -= sizeof(struct ieee80211_ht_cap);
-}
-
-/**
  * iwl_fill_probe_req - fill in all required fields and IE for probe request
  */
 
-u16 iwl_fill_probe_req(struct iwl_priv *priv,
-		       enum ieee80211_band band,
-		       struct ieee80211_mgmt *frame,
-		       int left)
+u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
+		       const u8 *ies, int ie_len, int left)
 {
 	int len = 0;
 	u8 *pos = NULL;
-	u16 active_rates, ret_rates, cck_rates, active_rate_basic;
-	const struct ieee80211_supported_band *sband =
-						iwl_get_hw_mode(priv, band);
-
 
 	/* Make sure there is enough space for the probe request,
 	 * two mandatory IEs and the data */
@@ -624,62 +552,12 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv,
 
 	len += 2;
 
-	/* fill in supported rate */
-	left -= 2;
-	if (left < 0)
-		return 0;
-
-	*pos++ = WLAN_EID_SUPP_RATES;
-	*pos = 0;
-
-	/* exclude 60M rate */
-	active_rates = priv->rates_mask;
-	active_rates &= ~IWL_RATE_60M_MASK;
-
-	active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
-
-	cck_rates = IWL_CCK_RATES_MASK & active_rates;
-	ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
-					     active_rate_basic, &left);
-	active_rates &= ~ret_rates;
-
-	ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
-					     active_rate_basic, &left);
-	active_rates &= ~ret_rates;
-
-	len += 2 + *pos;
-	pos += (*pos) + 1;
+	if (WARN_ON(left < ie_len))
+		return len;
 
-	if (active_rates == 0)
-		goto fill_end;
-
-	/* fill in supported extended rate */
-	/* ...next IE... */
-	left -= 2;
-	if (left < 0)
-		return 0;
-	/* ... fill it in... */
-	*pos++ = WLAN_EID_EXT_SUPP_RATES;
-	*pos = 0;
-	iwl_supported_rate_to_ie(pos, active_rates, active_rate_basic, &left);
-	if (*pos > 0) {
-		len += 2 + *pos;
-		pos += (*pos) + 1;
-	} else {
-		pos--;
-	}
-
- fill_end:
-
-	left -= 2;
-	if (left < 0)
-		return 0;
-
-	*pos++ = WLAN_EID_HT_CAPABILITY;
-	*pos = 0;
-	iwl_ht_cap_to_ie(sband, pos, &left);
-	if (*pos > 0)
-		len += 2 + *pos;
+	memcpy(pos, ies, ie_len);
+	len += ie_len;
+	left -= ie_len;
 
 	return (u16)len;
 }
@@ -699,11 +577,13 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	int ret = 0;
 	u32 rate_flags = 0;
 	u16 cmd_len;
+	u16 rx_chain = 0;
 	enum ieee80211_band band;
-	u8 n_probes = 2;
-	u8 rx_chain = priv->hw_params.valid_rx_ant;
+	u8 n_probes = 0;
+	u8 rx_ant = priv->hw_params.valid_rx_ant;
 	u8 rate;
-	DECLARE_SSID_BUF(ssid);
+	bool is_active = false;
+	int  chan_mod;
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
@@ -795,19 +675,25 @@ static void iwl_bg_request_scan(struct work_struct *data)
 			       scan_suspend_time, interval);
 	}
 
-	/* We should add the ability for user to lock to PASSIVE ONLY */
-	if (priv->one_direct_scan) {
-		IWL_DEBUG_SCAN(priv, "Start direct scan for '%s'\n",
-				print_ssid(ssid, priv->direct_ssid,
-					   priv->direct_ssid_len));
-		scan->direct_scan[0].id = WLAN_EID_SSID;
-		scan->direct_scan[0].len = priv->direct_ssid_len;
-		memcpy(scan->direct_scan[0].ssid,
-		       priv->direct_ssid, priv->direct_ssid_len);
-		n_probes++;
-	} else {
-		IWL_DEBUG_SCAN(priv, "Start indirect scan.\n");
-	}
+	if (priv->scan_request->n_ssids) {
+		int i, p = 0;
+		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
+		}
+		is_active = true;
+	} else
+		IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
 
 	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
 	scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
@@ -817,7 +703,9 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
 		band = IEEE80211_BAND_2GHZ;
 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
-		if (priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) {
+		chan_mod = le32_to_cpu(priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_MSK)
+				       >> RXON_FLG_CHANNEL_MODE_POS;
+		if (chan_mod == CHANNEL_MODE_PURE_40) {
 			rate = IWL_RATE_6M_PLCP;
 		} else {
 			rate = IWL_RATE_1M_PLCP;
@@ -827,13 +715,18 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		band = IEEE80211_BAND_5GHZ;
 		rate = IWL_RATE_6M_PLCP;
-		scan->good_CRC_th = IWL_GOOD_CRC_TH;
+		/*
+		 * If active scaning is requested but a certain channel
+		 * is marked passive, we can do active scanning if we
+		 * detect transmissions.
+		 */
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
 
 		/* Force use of chains B and C (0x6) for scan Rx for 4965
 		 * Avoid A (0x1) because of its off-channel reception on A-band.
 		 */
 		if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
-			rx_chain = 0x6;
+			rx_ant = ANT_BC;
 	} else {
 		IWL_WARN(priv, "Invalid scan band count\n");
 		goto done;
@@ -845,26 +738,27 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
 
 	/* MIMO is not used here, but value is required */
-	scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK |
-				cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
-				(rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) |
-				(0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
-
-	cmd_len = iwl_fill_probe_req(priv, band,
-				     (struct ieee80211_mgmt *)scan->data,
-				     IWL_MAX_SCAN_SIZE - sizeof(*scan));
+	rx_chain |= ANT_ABC << RXON_RX_CHAIN_VALID_POS;
+	rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+	scan->rx_chain = cpu_to_le16(rx_chain);
+	cmd_len = iwl_fill_probe_req(priv,
+				(struct ieee80211_mgmt *)scan->data,
+				priv->scan_request->ie,
+				priv->scan_request->ie_len,
+				IWL_MAX_SCAN_SIZE - sizeof(*scan));
 
 	scan->tx_cmd.len = cpu_to_le16(cmd_len);
 
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
+	if (iwl_is_monitor_mode(priv))
 		scan->filter_flags = RXON_FILTER_PROMISC_MSK;
 
 	scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
 			       RXON_FILTER_BCON_AWARE_MSK);
 
 	scan->channel_count =
-		iwl_get_channels_for_scan(priv, band, 1, /* active */
-			n_probes,
+		iwl_get_channels_for_scan(priv, band, is_active, n_probes,
 			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 
 	if (scan->channel_count == 0) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 44ab03a12e4..2addf735b19 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -86,8 +86,7 @@ static void iwl_sta_ucode_activate(struct iwl_priv *priv, u8 sta_id)
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
 
-	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) &&
-	    !(priv->stations_39[sta_id].used & IWL_STA_DRIVER_ACTIVE))
+	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE))
 		IWL_ERR(priv, "ACTIVATE a non DRIVER active station %d\n",
 			sta_id);
 
@@ -228,15 +227,16 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 }
 
 /**
- * iwl_add_station_flags - Add station to tables in driver and device
+ * iwl_add_station - Add station to tables in driver and device
  */
-u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap,
-			 u8 flags, struct ieee80211_sta_ht_cap *ht_info)
+u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags,
+		struct ieee80211_sta_ht_cap *ht_info)
 {
-	int i;
-	int sta_id = IWL_INVALID_STATION;
 	struct iwl_station_entry *station;
 	unsigned long flags_spin;
+	int i;
+	int sta_id = IWL_INVALID_STATION;
+	u16 rate;
 
 	spin_lock_irqsave(&priv->sta_lock, flags_spin);
 	if (is_ap)
@@ -288,6 +288,12 @@ u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap,
 	    priv->iw_mode != NL80211_IFTYPE_ADHOC)
 		iwl_set_ht_add_station(priv, sta_id, ht_info);
 
+	/* 3945 only */
+	rate = (priv->band == IEEE80211_BAND_5GHZ) ?
+		IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP;
+	/* Turn on both antennas for the station... */
+	station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK);
+
 	spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
 
 	/* Add station to device's station table */
@@ -295,7 +301,7 @@ u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap,
 	return sta_id;
 
 }
-EXPORT_SYMBOL(iwl_add_station_flags);
+EXPORT_SYMBOL(iwl_add_station);
 
 static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr)
 {
@@ -408,7 +414,7 @@ static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr,
 /**
  * iwl_remove_station - Remove driver's knowledge of station.
  */
-int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
+int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 {
 	int sta_id = IWL_INVALID_STATION;
 	int i, ret = -EINVAL;
@@ -490,7 +496,7 @@ void iwl_clear_stations_table(struct iwl_priv *priv)
 	/* keep track of static keys */
 	for (i = 0; i < WEP_KEYS_MAX ; i++) {
 		if (priv->wep_keys[i].key_size)
-			test_and_set_bit(i, &priv->ucode_key_table);
+			set_bit(i, &priv->ucode_key_table);
 	}
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
@@ -946,7 +952,7 @@ EXPORT_SYMBOL(iwl_send_lq_cmd);
  *       calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
  *       which requires station table entry to exist).
  */
-static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap)
+static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 {
 	int i, r;
 	struct iwl_link_quality_cmd link_cmd = {
@@ -979,8 +985,9 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap)
 	link_cmd.general_params.single_stream_ant_msk =
 				first_antenna(priv->hw_params.valid_tx_ant);
 	link_cmd.general_params.dual_stream_ant_msk = 3;
-	link_cmd.agg_params.agg_dis_start_th = 3;
-	link_cmd.agg_params.agg_time_limit = cpu_to_le16(4000);
+	link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+	link_cmd.agg_params.agg_time_limit =
+		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
 
 	/* Update the rate scaling for control frame Tx to AP */
 	link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id;
@@ -995,7 +1002,7 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap)
  * there is only one AP station with id= IWL_AP_ID
  * NOTE: mutex must be held before calling this function
  */
-int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
+int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
 {
 	struct ieee80211_sta *sta;
 	struct ieee80211_sta_ht_cap ht_config;
@@ -1020,8 +1027,7 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
 		rcu_read_unlock();
 	}
 
-	sta_id = iwl_add_station_flags(priv, addr, is_ap,
-				       0, cur_ht_config);
+	sta_id = iwl_add_station(priv, addr, is_ap, CMD_SYNC, cur_ht_config);
 
 	/* Set up default rate scaling table in device's station table */
 	iwl_sta_init_lq(priv, addr, is_ap);
@@ -1067,8 +1073,8 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 			return sta_id;
 
 		/* Create new station table entry */
-		sta_id = iwl_add_station_flags(priv, hdr->addr1,
-						   0, CMD_ASYNC, NULL);
+		sta_id = iwl_add_station(priv, hdr->addr1, false,
+					CMD_ASYNC, NULL);
 
 		if (sta_id != IWL_INVALID_STATION)
 			return sta_id;
@@ -1079,11 +1085,6 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 		iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
 		return priv->hw_params.bcast_sta_id;
 
-	/* If we are in monitor mode, use BCAST. This is required for
-	 * packet injection. */
-	case NL80211_IFTYPE_MONITOR:
-		return priv->hw_params.bcast_sta_id;
-
 	default:
 		IWL_WARN(priv, "Unknown mode of operation: %d\n",
 			priv->iw_mode);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 59a586b6b56..6deebade636 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -51,16 +51,15 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
 			struct ieee80211_key_conf *keyconf,
 			const u8 *addr, u32 iv32, u16 *phase1key);
 
-int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap);
-int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap);
+int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
+int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
 void iwl_clear_stations_table(struct iwl_priv *priv);
 int iwl_get_free_ucode_key_index(struct iwl_priv *priv);
 int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr);
 int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr);
 int iwl_send_add_sta(struct iwl_priv *priv,
 		     struct iwl_addsta_cmd *sta, u8 flags);
-u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr,
-			int is_ap, u8 flags,
+u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags,
 			struct ieee80211_sta_ht_cap *ht_info);
 void iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid);
 int iwl_sta_rx_agg_start(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 71d5b8a1a73..85ae7a62109 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -102,13 +102,8 @@ int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 			return ret;
 		}
 
-		/* restore this queue's parameters in nic hardware. */
-		ret = iwl_grab_nic_access(priv);
-		if (ret)
-			return ret;
 		iwl_write_direct32(priv, HBUS_TARG_WRPTR,
 				     txq->q.write_ptr | (txq_id << 8));
-		iwl_release_nic_access(priv);
 
 	/* else not in power-save mode, uCode will never sleep when we're
 	 * trying to tx (during RFKILL, we're not trying to tx). */
@@ -429,11 +424,6 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 		goto error_kw;
 	}
 	spin_lock_irqsave(&priv->lock, flags);
-	ret = iwl_grab_nic_access(priv);
-	if (unlikely(ret)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		goto error_reset;
-	}
 
 	/* Turn off all Tx DMA fifos */
 	priv->cfg->ops->lib->txq_set_sched(priv, 0);
@@ -441,7 +431,6 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 	/* Tell NIC where to find the "keep warm" buffer */
 	iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG, priv->kw.dma >> 4);
 
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Alloc and init all Tx queues, including the command queue (#4) */
@@ -460,7 +449,6 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 
  error:
 	iwl_hw_txq_ctx_free(priv);
- error_reset:
 	iwl_free_dma_ptr(priv, &priv->kw);
  error_kw:
 	iwl_free_dma_ptr(priv, &priv->scd_bc_tbls);
@@ -478,10 +466,6 @@ void iwl_txq_ctx_stop(struct iwl_priv *priv)
 
 	/* Turn off all Tx DMA fifos */
 	spin_lock_irqsave(&priv->lock, flags);
-	if (iwl_grab_nic_access(priv)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return;
-	}
 
 	priv->cfg->ops->lib->txq_set_sched(priv, 0);
 
@@ -492,7 +476,6 @@ void iwl_txq_ctx_stop(struct iwl_priv *priv)
 				    FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
 				    1000);
 	}
-	iwl_release_nic_access(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Deallocate memory for all Tx queues */
@@ -728,7 +711,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* drop all data frame if we are not associated */
 	if (ieee80211_is_data(fc) &&
-	    (priv->iw_mode != NL80211_IFTYPE_MONITOR ||
+	    (!iwl_is_monitor_mode(priv) ||
 	    !(info->flags & IEEE80211_TX_CTL_INJECTED)) && /* packet injection */
 	    (!iwl_is_associated(priv) ||
 	     ((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id) ||
@@ -1183,8 +1166,10 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
 			__func__, ra, tid);
 
 	sta_id = iwl_find_station(priv, ra);
-	if (sta_id == IWL_INVALID_STATION)
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Start AGG on invalid station\n");
 		return -ENXIO;
+	}
 
 	if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
 		IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");
@@ -1192,8 +1177,10 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
 	}
 
 	txq_id = iwl_txq_ctx_activate_free(priv);
-	if (txq_id == -1)
+	if (txq_id == -1) {
+		IWL_ERR(priv, "No free aggregation queue available\n");
 		return -ENXIO;
+	}
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
 	tid_data = &priv->stations[sta_id].tid[tid];
@@ -1207,7 +1194,7 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
 		return ret;
 
 	if (tid_data->tfds_in_queue == 0) {
-		IWL_ERR(priv, "HW queue is empty\n");
+		IWL_DEBUG_HT(priv, "HW queue is empty\n");
 		tid_data->agg.state = IWL_AGG_ON;
 		ieee80211_start_tx_ba_cb_irqsafe(priv->hw, ra, tid);
 	} else {
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index ff4d0e41d7c..83d31606dd0 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -95,188 +95,6 @@ struct iwl_mod_params iwl3945_mod_params = {
 	/* the rest are 0 by default */
 };
 
-/*************** STATION TABLE MANAGEMENT ****
- * mac80211 should be examined to determine if sta_info is duplicating
- * the functionality provided here
- */
-
-/**************************************************************/
-#if 0 /* temporary disable till we add real remove station */
-/**
- * iwl3945_remove_station - Remove driver's knowledge of station.
- *
- * NOTE:  This does not remove station from device's station table.
- */
-static u8 iwl3945_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
-{
-	int index = IWL_INVALID_STATION;
-	int i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-
-	if (is_ap)
-		index = IWL_AP_ID;
-	else if (is_broadcast_ether_addr(addr))
-		index = priv->hw_params.bcast_sta_id;
-	else
-		for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++)
-			if (priv->stations_39[i].used &&
-			    !compare_ether_addr(priv->stations_39[i].sta.sta.addr,
-						addr)) {
-				index = i;
-				break;
-			}
-
-	if (unlikely(index == IWL_INVALID_STATION))
-		goto out;
-
-	if (priv->stations_39[index].used) {
-		priv->stations_39[index].used = 0;
-		priv->num_stations--;
-	}
-
-	BUG_ON(priv->num_stations < 0);
-
-out:
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-	return 0;
-}
-#endif
-
-/**
- * iwl3945_clear_stations_table - Clear the driver's station table
- *
- * NOTE:  This does not clear or otherwise alter the device's station table.
- */
-static void iwl3945_clear_stations_table(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-
-	priv->num_stations = 0;
-	memset(priv->stations_39, 0, sizeof(priv->stations_39));
-
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-}
-
-/**
- * iwl3945_add_station - Add station to station tables in driver and device
- */
-u8 iwl3945_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap, u8 flags)
-{
-	int i;
-	int index = IWL_INVALID_STATION;
-	struct iwl3945_station_entry *station;
-	unsigned long flags_spin;
-	u8 rate;
-
-	spin_lock_irqsave(&priv->sta_lock, flags_spin);
-	if (is_ap)
-		index = IWL_AP_ID;
-	else if (is_broadcast_ether_addr(addr))
-		index = priv->hw_params.bcast_sta_id;
-	else
-		for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) {
-			if (!compare_ether_addr(priv->stations_39[i].sta.sta.addr,
-						addr)) {
-				index = i;
-				break;
-			}
-
-			if (!priv->stations_39[i].used &&
-			    index == IWL_INVALID_STATION)
-				index = i;
-		}
-
-	/* These two conditions has the same outcome but keep them separate
-	  since they have different meaning */
-	if (unlikely(index == IWL_INVALID_STATION)) {
-		spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-		return index;
-	}
-
-	if (priv->stations_39[index].used &&
-	   !compare_ether_addr(priv->stations_39[index].sta.sta.addr, addr)) {
-		spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-		return index;
-	}
-
-	IWL_DEBUG_ASSOC(priv, "Add STA ID %d: %pM\n", index, addr);
-	station = &priv->stations_39[index];
-	station->used = 1;
-	priv->num_stations++;
-
-	/* Set up the REPLY_ADD_STA command to send to device */
-	memset(&station->sta, 0, sizeof(struct iwl3945_addsta_cmd));
-	memcpy(station->sta.sta.addr, addr, ETH_ALEN);
-	station->sta.mode = 0;
-	station->sta.sta.sta_id = index;
-	station->sta.station_flags = 0;
-
-	if (priv->band == IEEE80211_BAND_5GHZ)
-		rate = IWL_RATE_6M_PLCP;
-	else
-		rate =	IWL_RATE_1M_PLCP;
-
-	/* Turn on both antennas for the station... */
-	station->sta.rate_n_flags =
-			iwl3945_hw_set_rate_n_flags(rate, RATE_MCS_ANT_AB_MSK);
-
-	spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-
-	/* Add station to device's station table */
-	iwl_send_add_sta(priv,
-			 (struct iwl_addsta_cmd *)&station->sta, flags);
-	return index;
-
-}
-
-static int iwl3945_send_rxon_assoc(struct iwl_priv *priv)
-{
-	int rc = 0;
-	struct iwl_rx_packet *res = NULL;
-	struct iwl3945_rxon_assoc_cmd rxon_assoc;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_RXON_ASSOC,
-		.len = sizeof(rxon_assoc),
-		.meta.flags = CMD_WANT_SKB,
-		.data = &rxon_assoc,
-	};
-	const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
-	const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
-
-	if ((rxon1->flags == rxon2->flags) &&
-	    (rxon1->filter_flags == rxon2->filter_flags) &&
-	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
-	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
-		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
-		return 0;
-	}
-
-	rxon_assoc.flags = priv->staging_rxon.flags;
-	rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
-	rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
-	rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
-	rxon_assoc.reserved = 0;
-
-	rc = iwl_send_cmd_sync(priv, &cmd);
-	if (rc)
-		return rc;
-
-	res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
-		IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
-		rc = -EIO;
-	}
-
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.meta.u.skb);
-
-	return rc;
-}
-
 /**
  * iwl3945_get_antenna_flags - Get antenna flags for RXON command
  * @priv: eeprom and antenna fields are used to determine antenna flags
@@ -314,150 +132,6 @@ __le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv)
 	return 0;		/* "diversity" is default if error */
 }
 
-/**
- * iwl3945_commit_rxon - commit staging_rxon to hardware
- *
- * The RXON command in staging_rxon is committed to the hardware and
- * the active_rxon structure is updated with the new data.  This
- * function correctly transitions out of the RXON_ASSOC_MSK state if
- * a HW tune is required based on the RXON structure changes.
- */
-static int iwl3945_commit_rxon(struct iwl_priv *priv)
-{
-	/* cast away the const for active_rxon in this function */
-	struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
-	struct iwl3945_rxon_cmd *staging_rxon = (void *)&priv->staging_rxon;
-	int rc = 0;
-	bool new_assoc =
-		!!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
-
-	if (!iwl_is_alive(priv))
-		return -1;
-
-	/* always get timestamp with Rx frame */
-	staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
-
-	/* select antenna */
-	staging_rxon->flags &=
-	    ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
-	staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
-
-	rc = iwl_check_rxon_cmd(priv);
-	if (rc) {
-		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
-		return -EINVAL;
-	}
-
-	/* If we don't need to send a full RXON, we can use
-	 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
-	 * and other flags for the current radio configuration. */
-	if (!iwl_full_rxon_required(priv)) {
-		rc = iwl3945_send_rxon_assoc(priv);
-		if (rc) {
-			IWL_ERR(priv, "Error setting RXON_ASSOC "
-				  "configuration (%d).\n", rc);
-			return rc;
-		}
-
-		memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
-		return 0;
-	}
-
-	/* If we are currently associated and the new config requires
-	 * an RXON_ASSOC and the new config wants the associated mask enabled,
-	 * we must clear the associated from the active configuration
-	 * before we apply the new config */
-	if (iwl_is_associated(priv) && new_assoc) {
-		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
-		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
-		/*
-		 * reserved4 and 5 could have been filled by the iwlcore code.
-		 * Let's clear them before pushing to the 3945.
-		 */
-		active_rxon->reserved4 = 0;
-		active_rxon->reserved5 = 0;
-		rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
-				      sizeof(struct iwl3945_rxon_cmd),
-				      &priv->active_rxon);
-
-		/* If the mask clearing failed then we set
-		 * active_rxon back to what it was previously */
-		if (rc) {
-			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
-			IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
-				  "configuration (%d).\n", rc);
-			return rc;
-		}
-	}
-
-	IWL_DEBUG_INFO(priv, "Sending RXON\n"
-		       "* with%s RXON_FILTER_ASSOC_MSK\n"
-		       "* channel = %d\n"
-		       "* bssid = %pM\n",
-		       (new_assoc ? "" : "out"),
-		       le16_to_cpu(staging_rxon->channel),
-		       staging_rxon->bssid_addr);
-
-	/*
-	 * reserved4 and 5 could have been filled by the iwlcore code.
-	 * Let's clear them before pushing to the 3945.
-	 */
-	staging_rxon->reserved4 = 0;
-	staging_rxon->reserved5 = 0;
-
-	iwl_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
-
-	/* Apply the new configuration */
-	rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
-			      sizeof(struct iwl3945_rxon_cmd),
-			      staging_rxon);
-	if (rc) {
-		IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
-		return rc;
-	}
-
-	memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
-	iwl3945_clear_stations_table(priv);
-
-	/* If we issue a new RXON command which required a tune then we must
-	 * send a new TXPOWER command or we won't be able to Tx any frames */
-	rc = priv->cfg->ops->lib->send_tx_power(priv);
-	if (rc) {
-		IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
-		return rc;
-	}
-
-	/* Add the broadcast address so we can send broadcast frames */
-	if (iwl3945_add_station(priv, iwl_bcast_addr, 0, 0) ==
-	    IWL_INVALID_STATION) {
-		IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n");
-		return -EIO;
-	}
-
-	/* If we have set the ASSOC_MSK and we are in BSS mode then
-	 * add the IWL_AP_ID to the station rate table */
-	if (iwl_is_associated(priv) &&
-	    (priv->iw_mode == NL80211_IFTYPE_STATION))
-		if (iwl3945_add_station(priv, priv->active_rxon.bssid_addr,
-					1, 0)
-		    == IWL_INVALID_STATION) {
-			IWL_ERR(priv, "Error adding AP address for transmit\n");
-			return -EIO;
-		}
-
-	/* Init the hardware's rate fallback order based on the band */
-	rc = iwl3945_init_hw_rate_table(priv);
-	if (rc) {
-		IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
-		return -EIO;
-	}
-
-	return 0;
-}
-
 static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
 				   struct ieee80211_key_conf *keyconf,
 				   u8 sta_id)
@@ -477,32 +151,31 @@ static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
 	key_flags &= ~STA_KEY_FLG_INVALID;
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
-	priv->stations_39[sta_id].keyinfo.alg = keyconf->alg;
-	priv->stations_39[sta_id].keyinfo.keylen = keyconf->keylen;
-	memcpy(priv->stations_39[sta_id].keyinfo.key, keyconf->key,
+	priv->stations[sta_id].keyinfo.alg = keyconf->alg;
+	priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
+	memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
 	       keyconf->keylen);
 
-	memcpy(priv->stations_39[sta_id].sta.key.key, keyconf->key,
+	memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
 	       keyconf->keylen);
 
-	if ((priv->stations_39[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
+	if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
 			== STA_KEY_FLG_NO_ENC)
-		priv->stations_39[sta_id].sta.key.key_offset =
+		priv->stations[sta_id].sta.key.key_offset =
 				 iwl_get_free_ucode_key_index(priv);
 	/* else, we are overriding an existing key => no need to allocated room
 	* in uCode. */
 
-	WARN(priv->stations_39[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
 		"no space for a new key");
 
-	priv->stations_39[sta_id].sta.key.key_flags = key_flags;
-	priv->stations_39[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
-	priv->stations_39[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	priv->stations[sta_id].sta.key.key_flags = key_flags;
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 
 	IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n");
 
-	ret = iwl_send_add_sta(priv,
-		(struct iwl_addsta_cmd *)&priv->stations_39[sta_id].sta, CMD_ASYNC);
+	ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
@@ -528,17 +201,16 @@ static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id)
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
-	memset(&priv->stations_39[sta_id].keyinfo, 0, sizeof(struct iwl3945_hw_key));
-	memset(&priv->stations_39[sta_id].sta.key, 0,
+	memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key));
+	memset(&priv->stations[sta_id].sta.key, 0,
 		sizeof(struct iwl4965_keyinfo));
-	priv->stations_39[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
-	priv->stations_39[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
-	priv->stations_39[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
 	IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n");
-	iwl_send_add_sta(priv,
-		(struct iwl_addsta_cmd *)&priv->stations_39[sta_id].sta, 0);
+	iwl_send_add_sta(priv, &priv->stations[sta_id].sta, 0);
 	return 0;
 }
 
@@ -739,7 +411,8 @@ static void iwl3945_setup_rxon_timing(struct iwl_priv *priv)
 		priv->rxon_timing.atim_window = 0;
 	} else {
 		priv->rxon_timing.beacon_interval =
-			iwl3945_adjust_beacon_interval(conf->beacon_int);
+			iwl3945_adjust_beacon_interval(
+				priv->vif->bss_conf.beacon_int);
 		/* TODO: we need to get atim_window from upper stack
 		 * for now we set to 0 */
 		priv->rxon_timing.atim_window = 0;
@@ -758,35 +431,6 @@ static void iwl3945_setup_rxon_timing(struct iwl_priv *priv)
 		le16_to_cpu(priv->rxon_timing.atim_window));
 }
 
-static int iwl3945_set_mode(struct iwl_priv *priv, int mode)
-{
-	if (mode == NL80211_IFTYPE_ADHOC) {
-		const struct iwl_channel_info *ch_info;
-
-		ch_info = iwl_get_channel_info(priv,
-			priv->band,
-			le16_to_cpu(priv->staging_rxon.channel));
-
-		if (!ch_info || !is_channel_ibss(ch_info)) {
-			IWL_ERR(priv, "channel %d not IBSS channel\n",
-				  le16_to_cpu(priv->staging_rxon.channel));
-			return -EINVAL;
-		}
-	}
-
-	iwl_connection_init_rx_config(priv, mode);
-
-	iwl3945_clear_stations_table(priv);
-
-	/* don't commit rxon if rf-kill is on*/
-	if (!iwl_is_ready_rf(priv))
-		return -EAGAIN;
-
-	iwl3945_commit_rxon(priv);
-
-	return 0;
-}
-
 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
 				      struct ieee80211_tx_info *info,
 				      struct iwl_cmd *cmd,
@@ -794,8 +438,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
 				      int sta_id)
 {
 	struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-	struct iwl3945_hw_key *keyinfo =
-	    &priv->stations_39[sta_id].keyinfo;
+	struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
 
 	switch (keyinfo->alg) {
 	case ALG_CCMP:
@@ -893,64 +536,6 @@ static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv,
 	tx->next_frame_len = 0;
 }
 
-/**
- * iwl3945_get_sta_id - Find station's index within station table
- */
-static int iwl3945_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
-{
-	int sta_id;
-	u16 fc = le16_to_cpu(hdr->frame_control);
-
-	/* If this frame is broadcast or management, use broadcast station id */
-	if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
-	    is_multicast_ether_addr(hdr->addr1))
-		return priv->hw_params.bcast_sta_id;
-
-	switch (priv->iw_mode) {
-
-	/* If we are a client station in a BSS network, use the special
-	 * AP station entry (that's the only station we communicate with) */
-	case NL80211_IFTYPE_STATION:
-		return IWL_AP_ID;
-
-	/* If we are an AP, then find the station, or use BCAST */
-	case NL80211_IFTYPE_AP:
-		sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
-		if (sta_id != IWL_INVALID_STATION)
-			return sta_id;
-		return priv->hw_params.bcast_sta_id;
-
-	/* If this frame is going out to an IBSS network, find the station,
-	 * or create a new station table entry */
-	case NL80211_IFTYPE_ADHOC: {
-		/* Create new station table entry */
-		sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
-		if (sta_id != IWL_INVALID_STATION)
-			return sta_id;
-
-		sta_id = iwl3945_add_station(priv, hdr->addr1, 0, CMD_ASYNC);
-
-		if (sta_id != IWL_INVALID_STATION)
-			return sta_id;
-
-		IWL_DEBUG_DROP(priv, "Station %pM not in station map. "
-			       "Defaulting to broadcast...\n",
-			       hdr->addr1);
-		iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
-		return priv->hw_params.bcast_sta_id;
-	}
-	/* If we are in monitor mode, use BCAST. This is required for
-	 * packet injection. */
-	case NL80211_IFTYPE_MONITOR:
-		return priv->hw_params.bcast_sta_id;
-
-	default:
-		IWL_WARN(priv, "Unknown mode of operation: %d\n",
-			priv->iw_mode);
-		return priv->hw_params.bcast_sta_id;
-	}
-}
-
 /*
  * start REPLY_TX command process
  */
@@ -1004,7 +589,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* drop all data frame if we are not associated */
 	if (ieee80211_is_data(fc) &&
-	    (priv->iw_mode != NL80211_IFTYPE_MONITOR) && /* packet injection */
+	    (!iwl_is_monitor_mode(priv)) && /* packet injection */
 	    (!iwl_is_associated(priv) ||
 	     ((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id))) {
 		IWL_DEBUG_DROP(priv, "Dropping - !iwl_is_associated\n");
@@ -1016,7 +601,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	hdr_len = ieee80211_hdrlen(fc);
 
 	/* Find (or create) index into station table for destination station */
-	sta_id = iwl3945_get_sta_id(priv, hdr);
+	sta_id = iwl_get_sta_id(priv, hdr);
 	if (sta_id == IWL_INVALID_STATION) {
 		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
 			       hdr->addr1);
@@ -1028,7 +613,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (ieee80211_is_data_qos(fc)) {
 		qc = ieee80211_get_qos_ctl(hdr);
 		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
-		seq_number = priv->stations_39[sta_id].tid[tid].seq_number &
+		seq_number = priv->stations[sta_id].tid[tid].seq_number &
 				IEEE80211_SCTL_SEQ;
 		hdr->seq_ctrl = cpu_to_le16(seq_number) |
 			(hdr->seq_ctrl &
@@ -1088,7 +673,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		txq->need_update = 1;
 		if (qc)
-			priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
+			priv->stations[sta_id].tid[tid].seq_number = seq_number;
 	} else {
 		wait_write_ptr = 1;
 		txq->need_update = 0;
@@ -1424,18 +1009,12 @@ static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 
 
-	if (flags & SW_CARD_DISABLED)
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-	else
-		clear_bit(STATUS_RF_KILL_SW, &priv->status);
-
 	iwl_scan_cancel(priv);
 
 	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
-	     test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
-	    (test_bit(STATUS_RF_KILL_SW, &status) !=
-	     test_bit(STATUS_RF_KILL_SW, &priv->status)))
-		queue_work(priv->workqueue, &priv->rf_kill);
+	     test_bit(STATUS_RF_KILL_HW, &priv->status)))
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+				test_bit(STATUS_RF_KILL_HW, &priv->status));
 	else
 		wake_up_interruptible(&priv->wait_command_queue);
 }
@@ -1591,7 +1170,7 @@ static int iwl3945_rx_queue_restock(struct iwl_priv *priv)
 
 	/* If we've added more space for the firmware to place data, tell it.
 	 * Increment device's write pointer in multiples of 8. */
-	if ((write != (rxq->write & ~0x7))
+	if ((rxq->write_actual != (rxq->write & ~0x7))
 	    || (abs(rxq->write - rxq->read) > 7)) {
 		spin_lock_irqsave(&rxq->lock, flags);
 		rxq->need_update = 1;
@@ -1612,21 +1191,30 @@ static int iwl3945_rx_queue_restock(struct iwl_priv *priv)
  * Also restock the Rx queue via iwl3945_rx_queue_restock.
  * This is called as a scheduled work item (except for during initialization)
  */
-static void iwl3945_rx_allocate(struct iwl_priv *priv)
+static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
 {
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
 	unsigned long flags;
-	spin_lock_irqsave(&rxq->lock, flags);
-	while (!list_empty(&rxq->rx_used)) {
+
+	while (1) {
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			return;
+		}
+
 		element = rxq->rx_used.next;
 		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		/* Alloc a new receive buffer */
 		rxb->skb =
 		    alloc_skb(priv->hw_params.rx_buf_size,
-				__GFP_NOWARN | GFP_ATOMIC);
+				priority);
 		if (!rxb->skb) {
 			if (net_ratelimit())
 				IWL_CRIT(priv, ": Can not allocate SKB buffers\n");
@@ -1644,18 +1232,18 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv)
 		 */
 		skb_reserve(rxb->skb, 4);
 
-		priv->alloc_rxb_skb++;
-		list_del(element);
-
 		/* Get physical address of RB/SKB */
 		rxb->real_dma_addr = pci_map_single(priv->pci_dev,
 						rxb->skb->data,
 						priv->hw_params.rx_buf_size,
 						PCI_DMA_FROMDEVICE);
+
+		spin_lock_irqsave(&rxq->lock, flags);
 		list_add_tail(&rxb->list, &rxq->rx_free);
+		priv->alloc_rxb_skb++;
 		rxq->free_count++;
+		spin_unlock_irqrestore(&rxq->lock, flags);
 	}
-	spin_unlock_irqrestore(&rxq->lock, flags);
 }
 
 void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
@@ -1685,33 +1273,30 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 	 * not restocked the Rx queue with fresh buffers */
 	rxq->read = rxq->write = 0;
 	rxq->free_count = 0;
+	rxq->write_actual = 0;
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
 
-/*
- * this should be called while priv->lock is locked
- */
-static void __iwl3945_rx_replenish(void *data)
-{
-	struct iwl_priv *priv = data;
-
-	iwl3945_rx_allocate(priv);
-	iwl3945_rx_queue_restock(priv);
-}
-
-
 void iwl3945_rx_replenish(void *data)
 {
 	struct iwl_priv *priv = data;
 	unsigned long flags;
 
-	iwl3945_rx_allocate(priv);
+	iwl3945_rx_allocate(priv, GFP_KERNEL);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	iwl3945_rx_queue_restock(priv);
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
+static void iwl3945_rx_replenish_now(struct iwl_priv *priv)
+{
+	iwl3945_rx_allocate(priv, GFP_ATOMIC);
+
+	iwl3945_rx_queue_restock(priv);
+}
+
+
 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
  * This free routine walks the list of POOL entries and if SKB is set to
@@ -1834,13 +1419,19 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 	unsigned long flags;
 	u8 fill_rx = 0;
 	u32 count = 8;
+	int total_empty = 0;
 
 	/* uCode's read index (stored in shared DRAM) indicates the last Rx
 	 * buffer that the driver may process (last buffer filled by ucode). */
 	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
 	i = rxq->read;
 
-	if (iwl_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
+	/* calculate total frames need to be restock after handling RX */
+	total_empty = r - priv->rxq.write_actual;
+	if (total_empty < 0)
+		total_empty += RX_QUEUE_SIZE;
+
+	if (total_empty > (RX_QUEUE_SIZE / 2))
 		fill_rx = 1;
 	/* Rx interrupt, but nothing sent from uCode */
 	if (i == r)
@@ -1879,6 +1470,7 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 				"r = %d, i = %d, %s, 0x%02x\n", r, i,
 				get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
 			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
+			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
 		} else {
 			/* No handling needed */
 			IWL_DEBUG(priv, IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
@@ -1916,7 +1508,7 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 			count++;
 			if (count >= 8) {
 				priv->rxq.read = i;
-				__iwl3945_rx_replenish(priv);
+				iwl3945_rx_replenish_now(priv);
 				count = 0;
 			}
 		}
@@ -1924,7 +1516,10 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
 
 	/* Backtrack one entry */
 	priv->rxq.read = i;
-	iwl3945_rx_queue_restock(priv);
+	if (fill_rx)
+		iwl3945_rx_replenish_now(priv);
+	else
+		iwl3945_rx_queue_restock(priv);
 }
 
 /* call this function to flush any scheduled tasklet */
@@ -1963,7 +1558,6 @@ static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 	u32 i;
 	u32 desc, time, count, base, data1;
 	u32 blink1, blink2, ilink1, ilink2;
-	int rc;
 
 	base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
 
@@ -1972,11 +1566,6 @@ static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 		return;
 	}
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
 
 	count = iwl_read_targ_mem(priv, base);
 
@@ -2011,8 +1600,6 @@ static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 			ilink1, ilink2, data1);
 	}
 
-	iwl_release_nic_access(priv);
-
 }
 
 #define EVENT_START_OFFSET  (6 * sizeof(u32))
@@ -2020,7 +1607,6 @@ static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
 /**
  * iwl3945_print_event_log - Dump error event log to syslog
  *
- * NOTE: Must be called with iwl_grab_nic_access() already obtained!
  */
 static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
 				u32 num_events, u32 mode)
@@ -2063,7 +1649,6 @@ static void iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
 
 static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 {
-	int rc;
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
 	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
@@ -2077,12 +1662,6 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 		return;
 	}
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		IWL_WARN(priv, "Can not read from adapter at this time.\n");
-		return;
-	}
-
 	/* event log header */
 	capacity = iwl_read_targ_mem(priv, base);
 	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
@@ -2094,7 +1673,6 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 	/* bail out if nothing in log */
 	if (size == 0) {
 		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		iwl_release_nic_access(priv);
 		return;
 	}
 
@@ -2110,24 +1688,6 @@ static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
 	/* (then/else) start at top of log */
 	iwl3945_print_event_log(priv, 0, next_entry, mode);
 
-	iwl_release_nic_access(priv);
-}
-
-static void iwl3945_error_recovery(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	memcpy(&priv->staging_rxon, &priv->recovery_rxon,
-	       sizeof(priv->staging_rxon));
-	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl3945_commit_rxon(priv);
-
-	iwl3945_add_station(priv, priv->bssid, 1, 0);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
-	priv->error_recovering = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static void iwl3945_irq_tasklet(struct iwl_priv *priv)
@@ -2178,6 +1738,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 		/* Tell the device to stop sending interrupts */
 		iwl_disable_interrupts(priv);
 
+		priv->isr_stats.hw++;
 		iwl_irq_handle_error(priv);
 
 		handled |= CSR_INT_BIT_HW_ERR;
@@ -2190,13 +1751,17 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (priv->debug_level & (IWL_DL_ISR)) {
 		/* NIC fires this, but we don't use it, redundant with WAKEUP */
-		if (inta & CSR_INT_BIT_SCD)
+		if (inta & CSR_INT_BIT_SCD) {
 			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
 				      "the frame/frames.\n");
+			priv->isr_stats.sch++;
+		}
 
 		/* Alive notification via Rx interrupt will do the real work */
-		if (inta & CSR_INT_BIT_ALIVE)
+		if (inta & CSR_INT_BIT_ALIVE) {
 			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+			priv->isr_stats.alive++;
+		}
 	}
 #endif
 	/* Safely ignore these bits for debug checks below */
@@ -2206,6 +1771,8 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 	if (inta & CSR_INT_BIT_SW_ERR) {
 		IWL_ERR(priv, "Microcode SW error detected. "
 			"Restarting 0x%X.\n", inta);
+		priv->isr_stats.sw++;
+		priv->isr_stats.sw_err = inta;
 		iwl_irq_handle_error(priv);
 		handled |= CSR_INT_BIT_SW_ERR;
 	}
@@ -2221,6 +1788,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
 		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
 
+		priv->isr_stats.wakeup++;
 		handled |= CSR_INT_BIT_WAKEUP;
 	}
 
@@ -2229,27 +1797,28 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 	 * notifications from uCode come through here*/
 	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
 		iwl3945_rx_handle(priv);
+		priv->isr_stats.rx++;
 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
 	}
 
 	if (inta & CSR_INT_BIT_FH_TX) {
 		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		priv->isr_stats.tx++;
 
 		iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
-		if (!iwl_grab_nic_access(priv)) {
-			iwl_write_direct32(priv, FH39_TCSR_CREDIT
-					     (FH39_SRVC_CHNL), 0x0);
-			iwl_release_nic_access(priv);
-		}
+		iwl_write_direct32(priv, FH39_TCSR_CREDIT
+					(FH39_SRVC_CHNL), 0x0);
 		handled |= CSR_INT_BIT_FH_TX;
 	}
 
-	if (inta & ~handled)
+	if (inta & ~handled) {
 		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		priv->isr_stats.unhandled++;
+	}
 
-	if (inta & ~CSR_INI_SET_MASK) {
+	if (inta & ~priv->inta_mask) {
 		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
-			 inta & ~CSR_INI_SET_MASK);
+			 inta & ~priv->inta_mask);
 		IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
 	}
 
@@ -2413,10 +1982,6 @@ static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 le
 
 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc)
-		return rc;
-
 	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
 			       IWL39_RTC_INST_LOWER_BOUND);
 
@@ -2437,7 +2002,6 @@ static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 le
 		}
 	}
 
-	iwl_release_nic_access(priv);
 
 	if (!errcnt)
 		IWL_DEBUG_INFO(priv,
@@ -2461,10 +2025,6 @@ static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32
 
 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
 
-	rc = iwl_grab_nic_access(priv);
-	if (rc)
-		return rc;
-
 	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
 		/* read data comes through single port, auto-incr addr */
 		/* NOTE: Use the debugless read so we don't flood kernel log
@@ -2485,8 +2045,6 @@ static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32
 		}
 	}
 
-	iwl_release_nic_access(priv);
-
 	return rc;
 }
 
@@ -2810,20 +2368,11 @@ static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
 {
 	dma_addr_t pinst;
 	dma_addr_t pdata;
-	int rc = 0;
-	unsigned long flags;
 
 	/* bits 31:0 for 3945 */
 	pinst = priv->ucode_code.p_addr;
 	pdata = priv->ucode_data_backup.p_addr;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return rc;
-	}
-
 	/* Tell bootstrap uCode where to find image to load */
 	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
 	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
@@ -2835,13 +2384,9 @@ static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
 	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
 				 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
 
-	iwl_release_nic_access(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
 
-	return rc;
+	return 0;
 }
 
 /**
@@ -2887,11 +2432,6 @@ static void iwl3945_init_alive_start(struct iwl_priv *priv)
 	queue_work(priv->workqueue, &priv->restart);
 }
 
-
-/* temporary */
-static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw,
-				     struct sk_buff *skb);
-
 /**
  * iwl3945_alive_start - called after REPLY_ALIVE notification received
  *                   from protocol/runtime uCode (initialization uCode's
@@ -2899,7 +2439,6 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw,
  */
 static void iwl3945_alive_start(struct iwl_priv *priv)
 {
-	int rc = 0;
 	int thermal_spin = 0;
 	u32 rfkill;
 
@@ -2922,17 +2461,10 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 		goto restart;
 	}
 
-	iwl3945_clear_stations_table(priv);
-
-	rc = iwl_grab_nic_access(priv);
-	if (rc) {
-		IWL_WARN(priv, "Can not read RFKILL status from adapter\n");
-		return;
-	}
+	iwl_clear_stations_table(priv);
 
 	rfkill = iwl_read_prph(priv, APMG_RFKILL_REG);
 	IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill);
-	iwl_release_nic_access(priv);
 
 	if (rfkill & 0x1) {
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -2952,9 +2484,6 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 	/* After the ALIVE response, we can send commands to 3945 uCode */
 	set_bit(STATUS_ALIVE, &priv->status);
 
-	/* Clear out the uCode error bit if it is set */
-	clear_bit(STATUS_FW_ERROR, &priv->status);
-
 	if (iwl_is_rfkill(priv))
 		return;
 
@@ -2981,7 +2510,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 	iwl_send_bt_config(priv);
 
 	/* Configure the adapter for unassociated operation */
-	iwl3945_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	iwl3945_reg_txpower_periodic(priv);
 
@@ -2991,17 +2520,17 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
-	if (priv->error_recovering)
-		iwl3945_error_recovery(priv);
-
 	/* reassociate for ADHOC mode */
 	if (priv->vif && (priv->iw_mode == NL80211_IFTYPE_ADHOC)) {
 		struct sk_buff *beacon = ieee80211_beacon_get(priv->hw,
 								priv->vif);
 		if (beacon)
-			iwl3945_mac_beacon_update(priv->hw, beacon);
+			iwl_mac_beacon_update(priv->hw, beacon);
 	}
 
+	if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
+		iwl_set_mode(priv, priv->iw_mode);
+
 	return;
 
  restart:
@@ -3024,7 +2553,7 @@ static void __iwl3945_down(struct iwl_priv *priv)
 		set_bit(STATUS_EXIT_PENDING, &priv->status);
 
 	iwl3945_led_unregister(priv);
-	iwl3945_clear_stations_table(priv);
+	iwl_clear_stations_table(priv);
 
 	/* Unblock any waiting calls */
 	wake_up_interruptible_all(&priv->wait_command_queue);
@@ -3047,31 +2576,23 @@ static void __iwl3945_down(struct iwl_priv *priv)
 		ieee80211_stop_queues(priv->hw);
 
 	/* If we have not previously called iwl3945_init() then
-	 * clear all bits but the RF Kill and SUSPEND bits and return */
+	 * clear all bits but the RF Kill bits and return */
 	if (!iwl_is_init(priv)) {
 		priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
 					STATUS_RF_KILL_HW |
-			       test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-					STATUS_RF_KILL_SW |
 			       test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
 					STATUS_GEO_CONFIGURED |
-			       test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-					STATUS_IN_SUSPEND |
 				test_bit(STATUS_EXIT_PENDING, &priv->status) <<
 					STATUS_EXIT_PENDING;
 		goto exit;
 	}
 
-	/* ...otherwise clear out all the status bits but the RF Kill and
-	 * SUSPEND bits and continue taking the NIC down. */
+	/* ...otherwise clear out all the status bits but the RF Kill
+	 * bit and continue taking the NIC down. */
 	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
 				STATUS_RF_KILL_HW |
-			test_bit(STATUS_RF_KILL_SW, &priv->status) <<
-				STATUS_RF_KILL_SW |
 			test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
 				STATUS_GEO_CONFIGURED |
-			test_bit(STATUS_IN_SUSPEND, &priv->status) <<
-				STATUS_IN_SUSPEND |
 			test_bit(STATUS_FW_ERROR, &priv->status) <<
 				STATUS_FW_ERROR |
 			test_bit(STATUS_EXIT_PENDING, &priv->status) <<
@@ -3085,17 +2606,12 @@ static void __iwl3945_down(struct iwl_priv *priv)
 	iwl3945_hw_txq_ctx_stop(priv);
 	iwl3945_hw_rxq_stop(priv);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!iwl_grab_nic_access(priv)) {
-		iwl_write_prph(priv, APMG_CLK_DIS_REG,
-					 APMG_CLK_VAL_DMA_CLK_RQT);
-		iwl_release_nic_access(priv);
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	iwl_write_prph(priv, APMG_CLK_DIS_REG,
+				APMG_CLK_VAL_DMA_CLK_RQT);
 
 	udelay(5);
 
-	if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+	if (exit_pending)
 		priv->cfg->ops->lib->apm_ops.stop(priv);
 	else
 		priv->cfg->ops->lib->apm_ops.reset(priv);
@@ -3131,12 +2647,6 @@ static int __iwl3945_up(struct iwl_priv *priv)
 		return -EIO;
 	}
 
-	if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
-		IWL_WARN(priv, "Radio disabled by SW RF kill (module "
-			    "parameter)\n");
-		return -ENODEV;
-	}
-
 	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
 		IWL_ERR(priv, "ucode not available for device bring up\n");
 		return -EIO;
@@ -3148,10 +2658,8 @@ static int __iwl3945_up(struct iwl_priv *priv)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 	else {
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
-		if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
-			IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
-			return -ENODEV;
-		}
+		IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
+		return -ENODEV;
 	}
 
 	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
@@ -3187,7 +2695,7 @@ static int __iwl3945_up(struct iwl_priv *priv)
 
 	for (i = 0; i < MAX_HW_RESTARTS; i++) {
 
-		iwl3945_clear_stations_table(priv);
+		iwl_clear_stations_table(priv);
 
 		/* load bootstrap state machine,
 		 * load bootstrap program into processor's memory,
@@ -3255,15 +2763,14 @@ static void iwl3945_rfkill_poll(struct work_struct *data)
 {
 	struct iwl_priv *priv =
 	    container_of(data, struct iwl_priv, rfkill_poll.work);
-	unsigned long status = priv->status;
 
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
 		clear_bit(STATUS_RF_KILL_HW, &priv->status);
 	else
 		set_bit(STATUS_RF_KILL_HW, &priv->status);
 
-	if (test_bit(STATUS_RF_KILL_HW, &status) != test_bit(STATUS_RF_KILL_HW, &priv->status))
-		queue_work(priv->workqueue, &priv->rf_kill);
+	wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+			test_bit(STATUS_RF_KILL_HW, &priv->status));
 
 	queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
 			   round_jiffies_relative(2 * HZ));
@@ -3283,9 +2790,9 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	int rc = 0;
 	struct iwl3945_scan_cmd *scan;
 	struct ieee80211_conf *conf = NULL;
-	u8 n_probes = 2;
+	u8 n_probes = 0;
 	enum ieee80211_band band;
-	DECLARE_SSID_BUF(ssid);
+	bool is_active = false;
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
@@ -3386,18 +2893,25 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 			       scan_suspend_time, interval);
 	}
 
-	/* We should add the ability for user to lock to PASSIVE ONLY */
-	if (priv->one_direct_scan) {
-		IWL_DEBUG_SCAN(priv, "Kicking off one direct scan for '%s'\n",
-				print_ssid(ssid, priv->direct_ssid,
-				priv->direct_ssid_len));
-		scan->direct_scan[0].id = WLAN_EID_SSID;
-		scan->direct_scan[0].len = priv->direct_ssid_len;
-		memcpy(scan->direct_scan[0].ssid,
-		       priv->direct_ssid, priv->direct_ssid_len);
-		n_probes++;
+	if (priv->scan_request->n_ssids) {
+		int i, p = 0;
+		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+		for (i = 0; i < priv->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!priv->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+				priv->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       priv->scan_request->ssids[i].ssid,
+			       priv->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
+		}
+		is_active = true;
 	} else
-		IWL_DEBUG_SCAN(priv, "Kicking off one indirect scan.\n");
+		IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n");
 
 	/* We don't build a direct scan probe request; the uCode will do
 	 * that based on the direct_mask added to each channel entry */
@@ -3414,7 +2928,12 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 		band = IEEE80211_BAND_2GHZ;
 	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
-		scan->good_CRC_th = IWL_GOOD_CRC_TH;
+		/*
+		 * If active scaning is requested but a certain channel
+		 * is marked passive, we can do active scanning if we
+		 * detect transmissions.
+		 */
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
 		band = IEEE80211_BAND_5GHZ;
 	} else {
 		IWL_WARN(priv, "Invalid scan band count\n");
@@ -3422,19 +2941,20 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	}
 
 	scan->tx_cmd.len = cpu_to_le16(
-		iwl_fill_probe_req(priv, band,
-				   (struct ieee80211_mgmt *)scan->data,
-				   IWL_MAX_SCAN_SIZE - sizeof(*scan)));
+			iwl_fill_probe_req(priv,
+				(struct ieee80211_mgmt *)scan->data,
+				priv->scan_request->ie,
+				priv->scan_request->ie_len,
+				IWL_MAX_SCAN_SIZE - sizeof(*scan)));
 
 	/* select Rx antennas */
 	scan->flags |= iwl3945_get_antenna_flags(priv);
 
-	if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
+	if (iwl_is_monitor_mode(priv))
 		scan->filter_flags = RXON_FILTER_PROMISC_MSK;
 
 	scan->channel_count =
-		iwl3945_get_channels_for_scan(priv, band, 1, /* active */
-					      n_probes,
+		iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
 			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 
 	if (scan->channel_count == 0) {
@@ -3482,7 +3002,6 @@ static void iwl3945_bg_up(struct work_struct *data)
 	mutex_lock(&priv->mutex);
 	__iwl3945_up(priv);
 	mutex_unlock(&priv->mutex);
-	iwl_rfkill_set_hw_state(priv);
 }
 
 static void iwl3945_bg_restart(struct work_struct *data)
@@ -3492,8 +3011,17 @@ static void iwl3945_bg_restart(struct work_struct *data)
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
-	iwl3945_down(priv);
-	queue_work(priv->workqueue, &priv->up);
+	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
+		mutex_lock(&priv->mutex);
+		priv->vif = NULL;
+		priv->is_open = 0;
+		mutex_unlock(&priv->mutex);
+		iwl3945_down(priv);
+		ieee80211_restart_hw(priv->hw);
+	} else {
+		iwl3945_down(priv);
+		queue_work(priv->workqueue, &priv->up);
+	}
 }
 
 static void iwl3945_bg_rx_replenish(struct work_struct *data)
@@ -3511,7 +3039,7 @@ static void iwl3945_bg_rx_replenish(struct work_struct *data)
 
 #define IWL_DELAY_NEXT_SCAN (HZ*2)
 
-static void iwl3945_post_associate(struct iwl_priv *priv)
+void iwl3945_post_associate(struct iwl_priv *priv)
 {
 	int rc = 0;
 	struct ieee80211_conf *conf = NULL;
@@ -3536,7 +3064,7 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
 	conf = ieee80211_get_hw_conf(priv->hw);
 
 	priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl3945_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
 	iwl3945_setup_rxon_timing(priv);
@@ -3569,7 +3097,7 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
 
 	}
 
-	iwl3945_commit_rxon(priv);
+	iwlcore_commit_rxon(priv);
 
 	switch (priv->iw_mode) {
 	case NL80211_IFTYPE_STATION:
@@ -3579,7 +3107,7 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
 	case NL80211_IFTYPE_ADHOC:
 
 		priv->assoc_id = 1;
-		iwl3945_add_station(priv, priv->bssid, 0, 0);
+		iwl_add_station(priv, priv->bssid, 0, CMD_SYNC, NULL);
 		iwl3945_sync_sta(priv, IWL_STA_ID,
 				 (priv->band == IEEE80211_BAND_5GHZ) ?
 				 IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP,
@@ -3601,8 +3129,6 @@ static void iwl3945_post_associate(struct iwl_priv *priv)
 	priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
 }
 
-static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed);
-
 /*****************************************************************************
  *
  * mac80211 entry point functions
@@ -3638,16 +3164,11 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
 
 	mutex_unlock(&priv->mutex);
 
-	iwl_rfkill_set_hw_state(priv);
-
 	if (ret)
 		goto out_release_irq;
 
 	IWL_DEBUG_INFO(priv, "Start UP work.\n");
 
-	if (test_bit(STATUS_IN_SUSPEND, &priv->status))
-		return 0;
-
 	/* Wait for START_ALIVE from ucode. Otherwise callbacks from
 	 * mac80211 will not be run successfully. */
 	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
@@ -3726,144 +3247,7 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
-				 struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type);
-
-	if (priv->vif) {
-		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n");
-		return -EOPNOTSUPP;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->vif = conf->vif;
-	priv->iw_mode = conf->type;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->mac_addr) {
-		IWL_DEBUG_MAC80211(priv, "Set: %pM\n", conf->mac_addr);
-		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
-	}
-
-	if (iwl_is_ready(priv))
-		iwl3945_set_mode(priv, conf->type);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-}
-
-/**
- * iwl3945_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	struct ieee80211_conf *conf = &hw->conf;
-	unsigned long flags;
-	int ret = 0;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d\n",
-				conf->channel->hw_value);
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	if (unlikely(!iwl3945_mod_params.disable_hw_scan &&
-		     test_bit(STATUS_SCANNING, &priv->status))) {
-		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
-		set_bit(STATUS_CONF_PENDING, &priv->status);
-		mutex_unlock(&priv->mutex);
-		return 0;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	ch_info = iwl_get_channel_info(priv, conf->channel->band,
-				       conf->channel->hw_value);
-	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_SCAN(priv,
-				"Channel %d [%d] is INVALID for this band.\n",
-				conf->channel->hw_value, conf->channel->band);
-		IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-		spin_unlock_irqrestore(&priv->lock, flags);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	iwl_set_rxon_channel(priv, conf->channel);
-
-	iwl_set_flags_for_band(priv, conf->channel->band);
-
-	/* The list of supported rates and rate mask can be different
-	 * for each phymode; since the phymode may have changed, reset
-	 * the rate mask to what mac80211 lists */
-	iwl_set_rate(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
-	if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
-		iwl3945_hw_channel_switch(priv, conf->channel);
-		goto out;
-	}
-#endif
-
-	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
-		if (conf->radio_enabled &&
-		    iwl_radio_kill_sw_enable_radio(priv)) {
-			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
-						 "waiting for uCode\n");
-			goto out;
-		}
-
-		if (!conf->radio_enabled) {
-			iwl_radio_kill_sw_disable_radio(priv);
-			IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
-			goto out;
-		}
-	}
-
-	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF kill\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	iwl_set_rate(priv);
-
-	if (memcmp(&priv->active_rxon,
-		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
-		iwl3945_commit_rxon(priv);
-	else
-		IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration\n");
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-out:
-	clear_bit(STATUS_CONF_PENDING, &priv->status);
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
-static void iwl3945_config_ap(struct iwl_priv *priv)
+void iwl3945_config_ap(struct iwl_priv *priv)
 {
 	int rc = 0;
 
@@ -3875,7 +3259,7 @@ static void iwl3945_config_ap(struct iwl_priv *priv)
 
 		/* RXON - unassoc (to set timing command) */
 		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
+		iwlcore_commit_rxon(priv);
 
 		/* RXON Timing */
 		memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
@@ -3911,8 +3295,8 @@ static void iwl3945_config_ap(struct iwl_priv *priv)
 		}
 		/* restore RXON assoc */
 		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
-		iwl3945_add_station(priv, iwl_bcast_addr, 0, 0);
+		iwlcore_commit_rxon(priv);
+		iwl_add_station(priv, iwl_bcast_addr, 0, CMD_SYNC, NULL);
 	}
 	iwl3945_send_beacon_cmd(priv);
 
@@ -3921,189 +3305,6 @@ static void iwl3945_config_ap(struct iwl_priv *priv)
 	 * clear sta table, add BCAST sta... */
 }
 
-static int iwl3945_mac_config_interface(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif,
-					struct ieee80211_if_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-	int rc;
-
-	if (conf == NULL)
-		return -EIO;
-
-	if (priv->vif != vif) {
-		IWL_DEBUG_MAC80211(priv, "leave - priv->vif != vif\n");
-		return 0;
-	}
-
-	/* handle this temporarily here */
-	if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-	    conf->changed & IEEE80211_IFCC_BEACON) {
-		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-		if (!beacon)
-			return -ENOMEM;
-		mutex_lock(&priv->mutex);
-		rc = iwl3945_mac_beacon_update(hw, beacon);
-		mutex_unlock(&priv->mutex);
-		if (rc)
-			return rc;
-	}
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	mutex_lock(&priv->mutex);
-
-	if (conf->bssid)
-		IWL_DEBUG_MAC80211(priv, "bssid: %pM\n", conf->bssid);
-
-/*
- * very dubious code was here; the probe filtering flag is never set:
- *
-	if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
-	    !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
- */
-
-	if (priv->iw_mode == NL80211_IFTYPE_AP) {
-		if (!conf->bssid) {
-			conf->bssid = priv->mac_addr;
-			memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
-			IWL_DEBUG_MAC80211(priv, "bssid was set to: %pM\n",
-					   conf->bssid);
-		}
-		if (priv->ibss_beacon)
-			dev_kfree_skb(priv->ibss_beacon);
-
-		priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
-	}
-
-	if (iwl_is_rfkill(priv))
-		goto done;
-
-	if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
-	    !is_multicast_ether_addr(conf->bssid)) {
-		/* If there is currently a HW scan going on in the background
-		 * then we need to cancel it else the RXON below will fail. */
-		if (iwl_scan_cancel_timeout(priv, 100)) {
-			IWL_WARN(priv, "Aborted scan still in progress "
-				    "after 100ms\n");
-			IWL_DEBUG_MAC80211(priv, "leaving:scan abort failed\n");
-			mutex_unlock(&priv->mutex);
-			return -EAGAIN;
-		}
-		memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
-
-		/* TODO: Audit driver for usage of these members and see
-		 * if mac80211 deprecates them (priv->bssid looks like it
-		 * shouldn't be there, but I haven't scanned the IBSS code
-		 * to verify) - jpk */
-		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-
-		if (priv->iw_mode == NL80211_IFTYPE_AP)
-			iwl3945_config_ap(priv);
-		else {
-			rc = iwl3945_commit_rxon(priv);
-			if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
-				iwl3945_add_station(priv,
-					priv->active_rxon.bssid_addr, 1, 0);
-		}
-
-	} else {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
-	}
-
- done:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-
-	return 0;
-}
-
-static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
-				     struct ieee80211_if_init_conf *conf)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	mutex_lock(&priv->mutex);
-
-	if (iwl_is_ready_rf(priv)) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
-	}
-	if (priv->vif == conf->vif) {
-		priv->vif = NULL;
-		memset(priv->bssid, 0, ETH_ALEN);
-	}
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-
-static void iwl3945_bss_info_changed(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *bss_conf,
-				     u32 changes)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
-
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
-				   bss_conf->use_short_preamble);
-		if (bss_conf->use_short_preamble)
-			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			priv->staging_rxon.flags &=
-				~RXON_FLG_SHORT_PREAMBLE_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n",
-				   bss_conf->use_cts_prot);
-		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
-			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
-		else
-			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
-		/* This should never happen as this function should
-		 * never be called from interrupt context. */
-		if (WARN_ON_ONCE(in_interrupt()))
-			return;
-		if (bss_conf->assoc) {
-			priv->assoc_id = bss_conf->aid;
-			priv->beacon_int = bss_conf->beacon_int;
-			priv->timestamp = bss_conf->timestamp;
-			priv->assoc_capability = bss_conf->assoc_capability;
-			priv->power_data.dtim_period = bss_conf->dtim_period;
-			priv->next_scan_jiffies = jiffies +
-					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
-			mutex_lock(&priv->mutex);
-			iwl3945_post_associate(priv);
-			mutex_unlock(&priv->mutex);
-		} else {
-			priv->assoc_id = 0;
-			IWL_DEBUG_MAC80211(priv,
-					"DISASSOC %d\n", bss_conf->assoc);
-		}
-	} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
-			IWL_DEBUG_MAC80211(priv,
-					"Associated Changes %d\n", changes);
-			iwl3945_send_rxon_assoc(priv);
-	}
-
-}
-
 static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 			       struct ieee80211_vif *vif,
 			       struct ieee80211_sta *sta,
@@ -4126,7 +3327,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	static_key = !iwl_is_associated(priv);
 
 	if (!static_key) {
-		sta_id = iwl3945_hw_find_station(priv, addr);
+		sta_id = iwl_find_station(priv, addr);
 		if (sta_id == IWL_INVALID_STATION) {
 			IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
 					    addr);
@@ -4162,185 +3363,6 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	return ret;
 }
 
-static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
-			   const struct ieee80211_tx_queue_params *params)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	int q;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (queue >= AC_NUM) {
-		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
-		return 0;
-	}
-
-	q = AC_NUM - 1 - queue;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
-	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
-	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
-	priv->qos_data.def_qos_parm.ac[q].edca_txop =
-			cpu_to_le16((params->txop * 32));
-
-	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
-	priv->qos_data.qos_active = 1;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	mutex_lock(&priv->mutex);
-	if (priv->iw_mode == NL80211_IFTYPE_AP)
-		iwl_activate_qos(priv, 1);
-	else if (priv->assoc_id && iwl_is_associated(priv))
-		iwl_activate_qos(priv, 0);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-}
-
-static int iwl3945_mac_get_tx_stats(struct ieee80211_hw *hw,
-				struct ieee80211_tx_queue_stats *stats)
-{
-	struct iwl_priv *priv = hw->priv;
-	int i, avail;
-	struct iwl_tx_queue *txq;
-	struct iwl_queue *q;
-	unsigned long flags;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < AC_NUM; i++) {
-		txq = &priv->txq[i];
-		q = &txq->q;
-		avail = iwl_queue_space(q);
-
-		stats[i].len = q->n_window - avail;
-		stats[i].limit = q->n_window - q->high_mark;
-		stats[i].count = q->n_window;
-
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-	return 0;
-}
-
-static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	iwl_reset_qos(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->assoc_id = 0;
-	priv->assoc_capability = 0;
-
-	/* new association get rid of ibss beacon skb */
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = NULL;
-
-	priv->beacon_int = priv->hw->conf.beacon_int;
-	priv->timestamp = 0;
-	if ((priv->iw_mode == NL80211_IFTYPE_STATION))
-		priv->beacon_int = 0;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	/* we are restarting association process
-	 * clear RXON_FILTER_ASSOC_MSK bit
-	*/
-	if (priv->iw_mode != NL80211_IFTYPE_AP) {
-		iwl_scan_cancel_timeout(priv, 100);
-		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv);
-	}
-
-	/* Per mac80211.h: This is only used in IBSS mode... */
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-
-		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	iwl_set_rate(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-}
-
-static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	__le64 timestamp;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return -EIO;
-	}
-
-	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
-		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n");
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->ibss_beacon)
-		dev_kfree_skb(priv->ibss_beacon);
-
-	priv->ibss_beacon = skb;
-
-	priv->assoc_id = 0;
-	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_reset_qos(priv);
-
-	iwl3945_post_associate(priv);
-
-
-	return 0;
-}
-
 /*****************************************************************************
  *
  * sysfs attributes
@@ -4359,7 +3381,7 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk
 static ssize_t show_debug_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%08X\n", priv->debug_level);
 }
@@ -4367,7 +3389,7 @@ static ssize_t store_debug_level(struct device *d,
 				struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
-	struct iwl_priv *priv = d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	unsigned long val;
 	int ret;
 
@@ -4388,7 +3410,7 @@ static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
 static ssize_t show_temperature(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -4401,7 +3423,7 @@ static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
 static ssize_t show_tx_power(struct device *d,
 			     struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
 }
 
@@ -4409,7 +3431,7 @@ static ssize_t store_tx_power(struct device *d,
 			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	char *p = (char *)buf;
 	u32 val;
 
@@ -4427,7 +3449,7 @@ static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
 static ssize_t show_flags(struct device *d,
 			  struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
 }
@@ -4436,7 +3458,7 @@ static ssize_t store_flags(struct device *d,
 			   struct device_attribute *attr,
 			   const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	u32 flags = simple_strtoul(buf, NULL, 0);
 
 	mutex_lock(&priv->mutex);
@@ -4448,7 +3470,7 @@ static ssize_t store_flags(struct device *d,
 			IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n",
 				       flags);
 			priv->staging_rxon.flags = cpu_to_le32(flags);
-			iwl3945_commit_rxon(priv);
+			iwlcore_commit_rxon(priv);
 		}
 	}
 	mutex_unlock(&priv->mutex);
@@ -4461,7 +3483,7 @@ static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
 static ssize_t show_filter_flags(struct device *d,
 				 struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 
 	return sprintf(buf, "0x%04X\n",
 		le32_to_cpu(priv->active_rxon.filter_flags));
@@ -4471,7 +3493,7 @@ static ssize_t store_filter_flags(struct device *d,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	u32 filter_flags = simple_strtoul(buf, NULL, 0);
 
 	mutex_lock(&priv->mutex);
@@ -4484,7 +3506,7 @@ static ssize_t store_filter_flags(struct device *d,
 				       "0x%04X\n", filter_flags);
 			priv->staging_rxon.filter_flags =
 				cpu_to_le32(filter_flags);
-			iwl3945_commit_rxon(priv);
+			iwlcore_commit_rxon(priv);
 		}
 	}
 	mutex_unlock(&priv->mutex);
@@ -4624,26 +3646,11 @@ static ssize_t show_power_level(struct device *d,
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	int mode = priv->power_data.user_power_setting;
-	int system = priv->power_data.system_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	switch (system) {
-	case IWL_POWER_SYS_AUTO:
-		p += sprintf(p, "SYSTEM:auto");
-		break;
-	case IWL_POWER_SYS_AC:
-		p += sprintf(p, "SYSTEM:ac");
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		p += sprintf(p, "SYSTEM:battery");
-		break;
-	}
-
-	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ?
-			"fixed" : "auto");
-	p += sprintf(p, "\tINDEX:%d", level);
-	p += sprintf(p, "\n");
+	p += sprintf(p, "INDEX:%d\t", level);
+	p += sprintf(p, "USER:%d\n", mode);
 	return p - buf + 1;
 }
 
@@ -4756,7 +3763,7 @@ static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
 static ssize_t show_status(struct device *d,
 			   struct device_attribute *attr, char *buf)
 {
-	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 	return sprintf(buf, "0x%08x\n", (int)priv->status);
@@ -4768,10 +3775,11 @@ static ssize_t dump_error_log(struct device *d,
 			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	char *p = (char *)buf;
 
 	if (p[0] == '1')
-		iwl3945_dump_nic_error_log((struct iwl_priv *)d->driver_data);
+		iwl3945_dump_nic_error_log(priv);
 
 	return strnlen(buf, count);
 }
@@ -4782,10 +3790,11 @@ static ssize_t dump_event_log(struct device *d,
 			      struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
+	struct iwl_priv *priv = dev_get_drvdata(d);
 	char *p = (char *)buf;
 
 	if (p[0] == '1')
-		iwl3945_dump_nic_event_log((struct iwl_priv *)d->driver_data);
+		iwl3945_dump_nic_event_log(priv);
 
 	return strnlen(buf, count);
 }
@@ -4807,7 +3816,6 @@ static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
 	INIT_WORK(&priv->up, iwl3945_bg_up);
 	INIT_WORK(&priv->restart, iwl3945_bg_restart);
 	INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
-	INIT_WORK(&priv->rf_kill, iwl_bg_rf_kill);
 	INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
 	INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
 	INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
@@ -4864,16 +3872,15 @@ static struct ieee80211_ops iwl3945_hw_ops = {
 	.tx = iwl3945_mac_tx,
 	.start = iwl3945_mac_start,
 	.stop = iwl3945_mac_stop,
-	.add_interface = iwl3945_mac_add_interface,
-	.remove_interface = iwl3945_mac_remove_interface,
-	.config = iwl3945_mac_config,
-	.config_interface = iwl3945_mac_config_interface,
+	.add_interface = iwl_mac_add_interface,
+	.remove_interface = iwl_mac_remove_interface,
+	.config = iwl_mac_config,
 	.configure_filter = iwl_configure_filter,
 	.set_key = iwl3945_mac_set_key,
-	.get_tx_stats = iwl3945_mac_get_tx_stats,
-	.conf_tx = iwl3945_mac_conf_tx,
-	.reset_tsf = iwl3945_mac_reset_tsf,
-	.bss_info_changed = iwl3945_bss_info_changed,
+	.get_tx_stats = iwl_mac_get_tx_stats,
+	.conf_tx = iwl_mac_conf_tx,
+	.reset_tsf = iwl_mac_reset_tsf,
+	.bss_info_changed = iwl_bss_info_changed,
 	.hw_scan = iwl_mac_hw_scan
 };
 
@@ -4886,7 +3893,6 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
 	priv->ibss_beacon = NULL;
 
 	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->power_data.lock);
 	spin_lock_init(&priv->sta_lock);
 	spin_lock_init(&priv->hcmd_lock);
 
@@ -4895,7 +3901,7 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
 	mutex_init(&priv->mutex);
 
 	/* Clear the driver's (not device's) station table */
-	iwl3945_clear_stations_table(priv);
+	iwl_clear_stations_table(priv);
 
 	priv->data_retry_limit = -1;
 	priv->ieee_channels = NULL;
@@ -4966,13 +3972,13 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
 
 	hw->wiphy->custom_regulatory = true;
 
-	hw->wiphy->max_scan_ssids = 1; /* WILL FIX */
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
+	/* we create the 802.11 header and a zero-length SSID element */
+	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
 
-	hw->conf.beacon_int = 100;
-
 	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
 		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 			&priv->bands[IEEE80211_BAND_2GHZ];
@@ -5037,6 +4043,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
 	priv->cfg = cfg;
 	priv->pci_dev = pdev;
+	priv->inta_mask = CSR_INI_SET_MASK;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	priv->debug_level = iwl3945_mod_params.debug;
@@ -5083,6 +4090,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	 * PCI Tx retries from interfering with C3 CPU state */
 	pci_write_config_byte(pdev, 0x41, 0x00);
 
+	/* this spin lock will be used in apm_ops.init and EEPROM access
+	 * we should init now
+	 */
+	spin_lock_init(&priv->reg_lock);
+
 	/* amp init */
 	err = priv->cfg->ops->lib->apm_ops.init(priv);
 	if (err < 0) {
@@ -5128,20 +4140,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
 		priv->cfg->name);
 
-	/***********************************
-	 * 7. Initialize Module Parameters
-	 * **********************************/
-
-	/* Initialize module parameter values here */
-	/* Disable radio (SW RF KILL) via parameter when loading driver */
-	if (iwl3945_mod_params.disable) {
-		set_bit(STATUS_RF_KILL_SW, &priv->status);
-		IWL_DEBUG_INFO(priv, "Radio disabled.\n");
-	}
-
-
 	/***********************
-	 * 8. Setup Services
+	 * 7. Setup Services
 	 * ********************/
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -5150,8 +4150,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	pci_enable_msi(priv->pci_dev);
 
-	err = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED,
-			  DRV_NAME, priv);
+	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
+			  IRQF_SHARED, DRV_NAME, priv);
 	if (err) {
 		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
 		goto out_disable_msi;
@@ -5169,7 +4169,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	iwl3945_setup_rx_handlers(priv);
 
 	/*********************************
-	 * 9. Setup and Register mac80211
+	 * 8. Setup and Register mac80211
 	 * *******************************/
 
 	iwl_enable_interrupts(priv);
@@ -5178,12 +4178,9 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	if (err)
 		goto  out_remove_sysfs;
 
-	err = iwl_rfkill_init(priv);
+	err = iwl_dbgfs_register(priv, DRV_NAME);
 	if (err)
-		IWL_ERR(priv, "Unable to initialize RFKILL system. "
-				  "Ignoring error: %d\n", err);
-	else
-		iwl_rfkill_set_hw_state(priv);
+		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
 
 	/* Start monitoring the killswitch */
 	queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
@@ -5228,6 +4225,8 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 
 	IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
 
+	iwl_dbgfs_unregister(priv);
+
 	set_bit(STATUS_EXIT_PENDING, &priv->status);
 
 	if (priv->mac80211_registered) {
@@ -5248,7 +4247,6 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 
 	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
 
-	iwl_rfkill_unregister(priv);
 	cancel_delayed_work_sync(&priv->rfkill_poll);
 
 	iwl3945_dealloc_ucode_pci(priv);
@@ -5258,7 +4256,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 	iwl3945_hw_txq_ctx_free(priv);
 
 	iwl3945_unset_hw_params(priv);
-	iwl3945_clear_stations_table(priv);
+	iwl_clear_stations_table(priv);
 
 	/*netif_stop_queue(dev); */
 	flush_workqueue(priv->workqueue);
@@ -5286,43 +4284,6 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
 	ieee80211_free_hw(priv->hw);
 }
 
-#ifdef CONFIG_PM
-
-static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-
-	if (priv->is_open) {
-		set_bit(STATUS_IN_SUSPEND, &priv->status);
-		iwl3945_mac_stop(priv->hw);
-		priv->is_open = 1;
-	}
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	return 0;
-}
-
-static int iwl3945_pci_resume(struct pci_dev *pdev)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-	int ret;
-
-	pci_set_power_state(pdev, PCI_D0);
-	ret = pci_enable_device(pdev);
-	if (ret)
-		return ret;
-	pci_restore_state(pdev);
-
-	if (priv->is_open)
-		iwl3945_mac_start(priv->hw);
-
-	clear_bit(STATUS_IN_SUSPEND, &priv->status);
-	return 0;
-}
-
-#endif /* CONFIG_PM */
 
 /*****************************************************************************
  *
@@ -5336,8 +4297,8 @@ static struct pci_driver iwl3945_driver = {
 	.probe = iwl3945_pci_probe,
 	.remove = __devexit_p(iwl3945_pci_remove),
 #ifdef CONFIG_PM
-	.suspend = iwl3945_pci_suspend,
-	.resume = iwl3945_pci_resume,
+	.suspend = iwl_pci_suspend,
+	.resume = iwl_pci_resume,
 #endif
 };
 
@@ -5378,8 +4339,6 @@ MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
 
 module_param_named(antenna, iwl3945_mod_params.antenna, int, 0444);
 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(disable, iwl3945_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
 module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
 MODULE_PARM_DESC(swcrypto,
 		 "using software crypto (default 1 [software])\n");
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
new file mode 100644
index 00000000000..1eccb6df46d
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -0,0 +1,23 @@
+config IWM
+	tristate "Intel Wireless Multicomm 3200 WiFi driver"
+	depends on MMC && WLAN_80211 && EXPERIMENTAL
+	depends on CFG80211
+	select WIRELESS_EXT
+	select FW_LOADER
+
+config IWM_DEBUG
+	bool "Enable full debugging output in iwmc3200wifi"
+	depends on IWM && DEBUG_FS
+	---help---
+	  This option will enable debug tracing and setting for iwm
+
+	  You can set the debug level and module through debugfs. By
+	  default all modules are set to the IWL_DL_ERR level.
+	  To see the list of debug modules and levels, see iwm/debug.h
+
+	  For example, if you want the full MLME debug output:
+	  echo 0xff > /debug/iwm/phyN/debug/mlme
+
+	  Or, if you want the full debug, for all modules:
+	  echo 0xff > /debug/iwm/phyN/debug/level
+	  echo 0xff > /debug/iwm/phyN/debug/modules
diff --git a/drivers/net/wireless/iwmc3200wifi/Makefile b/drivers/net/wireless/iwmc3200wifi/Makefile
new file mode 100644
index 00000000000..927f022545c
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_IWM) := iwmc3200wifi.o
+iwmc3200wifi-objs += main.o netdev.o rx.o tx.o sdio.o hal.o fw.o
+iwmc3200wifi-objs += commands.o wext.o cfg80211.o eeprom.o
+
+iwmc3200wifi-$(CONFIG_IWM_DEBUG) += debugfs.o
diff --git a/drivers/net/wireless/iwmc3200wifi/bus.h b/drivers/net/wireless/iwmc3200wifi/bus.h
new file mode 100644
index 00000000000..836663eec25
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/bus.h
@@ -0,0 +1,57 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#ifndef __IWM_BUS_H__
+#define __IWM_BUS_H__
+
+#include "iwm.h"
+
+struct iwm_if_ops {
+	int (*enable)(struct iwm_priv *iwm);
+	int (*disable)(struct iwm_priv *iwm);
+	int (*send_chunk)(struct iwm_priv *iwm, u8* buf, int count);
+
+	int (*debugfs_init)(struct iwm_priv *iwm, struct dentry *parent_dir);
+	void (*debugfs_exit)(struct iwm_priv *iwm);
+
+	const char *umac_name;
+	const char *calib_lmac_name;
+	const char *lmac_name;
+};
+
+static inline int iwm_bus_send_chunk(struct iwm_priv *iwm, u8 *buf, int count)
+{
+	return iwm->bus_ops->send_chunk(iwm, buf, count);
+}
+
+static inline int iwm_bus_enable(struct iwm_priv *iwm)
+{
+	return iwm->bus_ops->enable(iwm);
+}
+
+static inline int iwm_bus_disable(struct iwm_priv *iwm)
+{
+	return iwm->bus_ops->disable(iwm);
+}
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
new file mode 100644
index 00000000000..96f714e6e12
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -0,0 +1,409 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+
+#include "iwm.h"
+#include "commands.h"
+#include "cfg80211.h"
+#include "debug.h"
+
+#define RATETAB_ENT(_rate, _rateid, _flags) \
+	{								\
+		.bitrate	= (_rate),				\
+		.hw_value	= (_rateid),				\
+		.flags		= (_flags),				\
+	}
+
+#define CHAN2G(_channel, _freq, _flags) {			\
+	.band			= IEEE80211_BAND_2GHZ,		\
+	.center_freq		= (_freq),			\
+	.hw_value		= (_channel),			\
+	.flags			= (_flags),			\
+	.max_antenna_gain	= 0,				\
+	.max_power		= 30,				\
+}
+
+#define CHAN5G(_channel, _flags) {				\
+	.band			= IEEE80211_BAND_5GHZ,		\
+	.center_freq		= 5000 + (5 * (_channel)),	\
+	.hw_value		= (_channel),			\
+	.flags			= (_flags),			\
+	.max_antenna_gain	= 0,				\
+	.max_power		= 30,				\
+}
+
+static struct ieee80211_rate iwm_rates[] = {
+	RATETAB_ENT(10,  0x1,   0),
+	RATETAB_ENT(20,  0x2,   0),
+	RATETAB_ENT(55,  0x4,   0),
+	RATETAB_ENT(110, 0x8,   0),
+	RATETAB_ENT(60,  0x10,  0),
+	RATETAB_ENT(90,  0x20,  0),
+	RATETAB_ENT(120, 0x40,  0),
+	RATETAB_ENT(180, 0x80,  0),
+	RATETAB_ENT(240, 0x100, 0),
+	RATETAB_ENT(360, 0x200, 0),
+	RATETAB_ENT(480, 0x400, 0),
+	RATETAB_ENT(540, 0x800, 0),
+};
+
+#define iwm_a_rates		(iwm_rates + 4)
+#define iwm_a_rates_size	8
+#define iwm_g_rates		(iwm_rates + 0)
+#define iwm_g_rates_size	12
+
+static struct ieee80211_channel iwm_2ghz_channels[] = {
+	CHAN2G(1, 2412, 0),
+	CHAN2G(2, 2417, 0),
+	CHAN2G(3, 2422, 0),
+	CHAN2G(4, 2427, 0),
+	CHAN2G(5, 2432, 0),
+	CHAN2G(6, 2437, 0),
+	CHAN2G(7, 2442, 0),
+	CHAN2G(8, 2447, 0),
+	CHAN2G(9, 2452, 0),
+	CHAN2G(10, 2457, 0),
+	CHAN2G(11, 2462, 0),
+	CHAN2G(12, 2467, 0),
+	CHAN2G(13, 2472, 0),
+	CHAN2G(14, 2484, 0),
+};
+
+static struct ieee80211_channel iwm_5ghz_a_channels[] = {
+	CHAN5G(34, 0),		CHAN5G(36, 0),
+	CHAN5G(38, 0),		CHAN5G(40, 0),
+	CHAN5G(42, 0),		CHAN5G(44, 0),
+	CHAN5G(46, 0),		CHAN5G(48, 0),
+	CHAN5G(52, 0),		CHAN5G(56, 0),
+	CHAN5G(60, 0),		CHAN5G(64, 0),
+	CHAN5G(100, 0),		CHAN5G(104, 0),
+	CHAN5G(108, 0),		CHAN5G(112, 0),
+	CHAN5G(116, 0),		CHAN5G(120, 0),
+	CHAN5G(124, 0),		CHAN5G(128, 0),
+	CHAN5G(132, 0),		CHAN5G(136, 0),
+	CHAN5G(140, 0),		CHAN5G(149, 0),
+	CHAN5G(153, 0),		CHAN5G(157, 0),
+	CHAN5G(161, 0),		CHAN5G(165, 0),
+	CHAN5G(184, 0),		CHAN5G(188, 0),
+	CHAN5G(192, 0),		CHAN5G(196, 0),
+	CHAN5G(200, 0),		CHAN5G(204, 0),
+	CHAN5G(208, 0),		CHAN5G(212, 0),
+	CHAN5G(216, 0),
+};
+
+static struct ieee80211_supported_band iwm_band_2ghz = {
+	.channels = iwm_2ghz_channels,
+	.n_channels = ARRAY_SIZE(iwm_2ghz_channels),
+	.bitrates = iwm_g_rates,
+	.n_bitrates = iwm_g_rates_size,
+};
+
+static struct ieee80211_supported_band iwm_band_5ghz = {
+	.channels = iwm_5ghz_a_channels,
+	.n_channels = ARRAY_SIZE(iwm_5ghz_a_channels),
+	.bitrates = iwm_a_rates,
+	.n_bitrates = iwm_a_rates_size,
+};
+
+int iwm_cfg80211_inform_bss(struct iwm_priv *iwm)
+{
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+	struct iwm_bss_info *bss, *next;
+	struct iwm_umac_notif_bss_info *umac_bss;
+	struct ieee80211_mgmt *mgmt;
+	struct ieee80211_channel *channel;
+	struct ieee80211_supported_band *band;
+	s32 signal;
+	int freq;
+
+	list_for_each_entry_safe(bss, next, &iwm->bss_list, node) {
+		umac_bss = bss->bss;
+		mgmt = (struct ieee80211_mgmt *)(umac_bss->frame_buf);
+
+		if (umac_bss->band == UMAC_BAND_2GHZ)
+			band = wiphy->bands[IEEE80211_BAND_2GHZ];
+		else if (umac_bss->band == UMAC_BAND_5GHZ)
+			band = wiphy->bands[IEEE80211_BAND_5GHZ];
+		else {
+			IWM_ERR(iwm, "Invalid band: %d\n", umac_bss->band);
+			return -EINVAL;
+		}
+
+		freq = ieee80211_channel_to_frequency(umac_bss->channel);
+		channel = ieee80211_get_channel(wiphy, freq);
+		signal = umac_bss->rssi * 100;
+
+		if (!cfg80211_inform_bss_frame(wiphy, channel, mgmt,
+					       le16_to_cpu(umac_bss->frame_len),
+					       signal, GFP_KERNEL))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int iwm_cfg80211_change_iface(struct wiphy *wiphy, int ifindex,
+				     enum nl80211_iftype type, u32 *flags,
+				     struct vif_params *params)
+{
+	struct net_device *ndev;
+	struct wireless_dev *wdev;
+	struct iwm_priv *iwm;
+	u32 old_mode;
+
+	/* we're under RTNL */
+	ndev = __dev_get_by_index(&init_net, ifindex);
+	if (!ndev)
+		return -ENODEV;
+
+	wdev = ndev->ieee80211_ptr;
+	iwm = ndev_to_iwm(ndev);
+	old_mode = iwm->conf.mode;
+
+	switch (type) {
+	case NL80211_IFTYPE_STATION:
+		iwm->conf.mode = UMAC_MODE_BSS;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		iwm->conf.mode = UMAC_MODE_IBSS;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	wdev->iftype = type;
+
+	if ((old_mode == iwm->conf.mode) || !iwm->umac_profile)
+		return 0;
+
+	iwm->umac_profile->mode = cpu_to_le32(iwm->conf.mode);
+
+	if (iwm->umac_profile_active) {
+		int ret = iwm_invalidate_mlme_profile(iwm);
+		if (ret < 0)
+			IWM_ERR(iwm, "Couldn't invalidate profile\n");
+	}
+
+	return 0;
+}
+
+static int iwm_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
+			     struct cfg80211_scan_request *request)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(ndev);
+	int ret;
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status)) {
+		IWM_ERR(iwm, "Scan while device is not ready\n");
+		return -EIO;
+	}
+
+	if (test_bit(IWM_STATUS_SCANNING, &iwm->status)) {
+		IWM_ERR(iwm, "Scanning already\n");
+		return -EAGAIN;
+	}
+
+	if (test_bit(IWM_STATUS_SCAN_ABORTING, &iwm->status)) {
+		IWM_ERR(iwm, "Scanning being aborted\n");
+		return -EAGAIN;
+	}
+
+	set_bit(IWM_STATUS_SCANNING, &iwm->status);
+
+	ret = iwm_scan_ssids(iwm, request->ssids, request->n_ssids);
+	if (ret) {
+		clear_bit(IWM_STATUS_SCANNING, &iwm->status);
+		return ret;
+	}
+
+	iwm->scan_request = request;
+	return 0;
+}
+
+static int iwm_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+	if (changed & WIPHY_PARAM_RTS_THRESHOLD &&
+	    (iwm->conf.rts_threshold != wiphy->rts_threshold)) {
+		int ret;
+
+		iwm->conf.rts_threshold = wiphy->rts_threshold;
+
+		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+					     CFG_RTS_THRESHOLD,
+					     iwm->conf.rts_threshold);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (changed & WIPHY_PARAM_FRAG_THRESHOLD &&
+	    (iwm->conf.frag_threshold != wiphy->frag_threshold)) {
+		int ret;
+
+		iwm->conf.frag_threshold = wiphy->frag_threshold;
+
+		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX,
+					     CFG_FRAG_THRESHOLD,
+					     iwm->conf.frag_threshold);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int iwm_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+				  struct cfg80211_ibss_params *params)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+	struct ieee80211_channel *chan = params->channel;
+	struct cfg80211_bss *bss;
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return -EIO;
+
+	/* UMAC doesn't support creating IBSS network with specified bssid.
+	 * This should be removed after we have join only mode supported. */
+	if (params->bssid)
+		return -EOPNOTSUPP;
+
+	bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
+				params->ssid, params->ssid_len);
+	if (!bss) {
+		iwm_scan_one_ssid(iwm, params->ssid, params->ssid_len);
+		schedule_timeout_interruptible(2 * HZ);
+		bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
+					params->ssid, params->ssid_len);
+	}
+	/* IBSS join only mode is not supported by UMAC ATM */
+	if (bss) {
+		cfg80211_put_bss(bss);
+		return -EOPNOTSUPP;
+	}
+
+	iwm->channel = ieee80211_frequency_to_channel(chan->center_freq);
+	iwm->umac_profile->ibss.band = chan->band;
+	iwm->umac_profile->ibss.channel = iwm->channel;
+	iwm->umac_profile->ssid.ssid_len = params->ssid_len;
+	memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len);
+
+	if (params->bssid)
+		memcpy(&iwm->umac_profile->bssid[0], params->bssid, ETH_ALEN);
+
+	return iwm_send_mlme_profile(iwm);
+}
+
+static int iwm_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+	if (iwm->umac_profile_active)
+		return iwm_invalidate_mlme_profile(iwm);
+
+	return 0;
+}
+
+static struct cfg80211_ops iwm_cfg80211_ops = {
+	.change_virtual_intf = iwm_cfg80211_change_iface,
+	.scan = iwm_cfg80211_scan,
+	.set_wiphy_params = iwm_cfg80211_set_wiphy_params,
+	.join_ibss = iwm_cfg80211_join_ibss,
+	.leave_ibss = iwm_cfg80211_leave_ibss,
+};
+
+struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev)
+{
+	int ret = 0;
+	struct wireless_dev *wdev;
+
+	/*
+	 * We're trying to have the following memory
+	 * layout:
+	 *
+	 * +-------------------------+
+	 * | struct wiphy	     |
+	 * +-------------------------+
+	 * | struct iwm_priv         |
+	 * +-------------------------+
+	 * | bus private data        |
+	 * | (e.g. iwm_priv_sdio)    |
+	 * +-------------------------+
+	 *
+	 */
+
+	wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+	if (!wdev) {
+		dev_err(dev, "Couldn't allocate wireless device\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	wdev->wiphy = wiphy_new(&iwm_cfg80211_ops,
+				sizeof(struct iwm_priv) + sizeof_bus);
+	if (!wdev->wiphy) {
+		dev_err(dev, "Couldn't allocate wiphy device\n");
+		ret = -ENOMEM;
+		goto out_err_new;
+	}
+
+	set_wiphy_dev(wdev->wiphy, dev);
+	wdev->wiphy->max_scan_ssids = UMAC_WIFI_IF_PROBE_OPTION_MAX;
+	wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+				       BIT(NL80211_IFTYPE_ADHOC);
+	wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &iwm_band_2ghz;
+	wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &iwm_band_5ghz;
+	wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+	ret = wiphy_register(wdev->wiphy);
+	if (ret < 0) {
+		dev_err(dev, "Couldn't register wiphy device\n");
+		goto out_err_register;
+	}
+
+	return wdev;
+
+ out_err_register:
+	wiphy_free(wdev->wiphy);
+
+ out_err_new:
+	kfree(wdev);
+
+	return ERR_PTR(ret);
+}
+
+void iwm_wdev_free(struct iwm_priv *iwm)
+{
+	struct wireless_dev *wdev = iwm_to_wdev(iwm);
+
+	if (!wdev)
+		return;
+
+	wiphy_unregister(wdev->wiphy);
+	wiphy_free(wdev->wiphy);
+	kfree(wdev);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.h b/drivers/net/wireless/iwmc3200wifi/cfg80211.h
new file mode 100644
index 00000000000..56a34145acb
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.h
@@ -0,0 +1,31 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#ifndef __IWM_CFG80211_H__
+#define __IWM_CFG80211_H__
+
+int iwm_cfg80211_inform_bss(struct iwm_priv *iwm);
+struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev);
+void iwm_wdev_free(struct iwm_priv *iwm);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
new file mode 100644
index 00000000000..834a7f544e5
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -0,0 +1,920 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <linux/ieee80211.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "hal.h"
+#include "umac.h"
+#include "commands.h"
+#include "debug.h"
+
+static int iwm_send_lmac_ptrough_cmd(struct iwm_priv *iwm,
+				     u8 lmac_cmd_id,
+				     const void *lmac_payload,
+				     u16 lmac_payload_size,
+				     u8 resp)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_LMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_lmac_cmd lmac_cmd;
+
+	lmac_cmd.id = lmac_cmd_id;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_WIFI_PASS_THROUGH;
+	umac_cmd.resp = resp;
+
+	return iwm_hal_send_host_cmd(iwm, &udma_cmd, &umac_cmd, &lmac_cmd,
+				     lmac_payload, lmac_payload_size);
+}
+
+int iwm_send_wifi_if_cmd(struct iwm_priv *iwm, void *payload, u16 payload_size,
+			 bool resp)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_WIFI_IF_WRAPPER;
+	umac_cmd.resp = resp;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd,
+				     payload, payload_size);
+}
+
+static struct coex_event iwm_sta_xor_prio_tbl[COEX_EVENTS_NUM] =
+{
+	{4, 3, 0, COEX_UNASSOC_IDLE_FLAGS},
+	{4, 3, 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
+	{4, 3, 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
+	{4, 3, 0, COEX_CALIBRATION_FLAGS},
+	{4, 3, 0, COEX_PERIODIC_CALIBRATION_FLAGS},
+	{4, 3, 0, COEX_CONNECTION_ESTAB_FLAGS},
+	{4, 3, 0, COEX_ASSOCIATED_IDLE_FLAGS},
+	{4, 3, 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
+	{4, 3, 0, COEX_ASSOC_AUTO_SCAN_FLAGS},
+	{4, 3, 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS},
+	{6, 3, 0, COEX_XOR_RF_ON_FLAGS},
+	{4, 3, 0, COEX_RF_OFF_FLAGS},
+	{6, 6, 0, COEX_STAND_ALONE_DEBUG_FLAGS},
+	{4, 3, 0, COEX_IPAN_ASSOC_LEVEL_FLAGS},
+	{4, 3, 0, COEX_RSRVD1_FLAGS},
+	{4, 3, 0, COEX_RSRVD2_FLAGS}
+};
+
+static struct coex_event iwm_sta_cm_prio_tbl[COEX_EVENTS_NUM] =
+{
+	{1, 1, 0, COEX_UNASSOC_IDLE_FLAGS},
+	{4, 3, 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
+	{3, 3, 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
+	{5, 5, 0, COEX_CALIBRATION_FLAGS},
+	{4, 4, 0, COEX_PERIODIC_CALIBRATION_FLAGS},
+	{5, 4, 0, COEX_CONNECTION_ESTAB_FLAGS},
+	{4, 4, 0, COEX_ASSOCIATED_IDLE_FLAGS},
+	{4, 4, 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
+	{4, 4, 0, COEX_ASSOC_AUTO_SCAN_FLAGS},
+	{4, 4, 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS},
+	{1, 1, 0, COEX_RF_ON_FLAGS},
+	{1, 1, 0, COEX_RF_OFF_FLAGS},
+	{6, 6, 0, COEX_STAND_ALONE_DEBUG_FLAGS},
+	{5, 4, 0, COEX_IPAN_ASSOC_LEVEL_FLAGS},
+	{1, 1, 0, COEX_RSRVD1_FLAGS},
+	{1, 1, 0, COEX_RSRVD2_FLAGS}
+};
+
+int iwm_send_prio_table(struct iwm_priv *iwm)
+{
+	struct iwm_coex_prio_table_cmd coex_table_cmd;
+	u32 coex_enabled, mode_enabled;
+
+	memset(&coex_table_cmd, 0, sizeof(struct iwm_coex_prio_table_cmd));
+
+	coex_table_cmd.flags = COEX_FLAGS_STA_TABLE_VALID_MSK;
+
+	switch (iwm->conf.coexist_mode) {
+	case COEX_MODE_XOR:
+	case COEX_MODE_CM:
+		coex_enabled = 1;
+		break;
+	default:
+		coex_enabled = 0;
+		break;
+	}
+
+	switch (iwm->conf.mode) {
+	case UMAC_MODE_BSS:
+	case UMAC_MODE_IBSS:
+		mode_enabled = 1;
+		break;
+	default:
+		mode_enabled = 0;
+		break;
+	}
+
+	if (coex_enabled && mode_enabled) {
+		coex_table_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK |
+					COEX_FLAGS_ASSOC_WAKEUP_UMASK_MSK |
+					COEX_FLAGS_UNASSOC_WAKEUP_UMASK_MSK;
+
+		switch (iwm->conf.coexist_mode) {
+		case COEX_MODE_XOR:
+			memcpy(coex_table_cmd.sta_prio, iwm_sta_xor_prio_tbl,
+			       sizeof(iwm_sta_xor_prio_tbl));
+			break;
+		case COEX_MODE_CM:
+			memcpy(coex_table_cmd.sta_prio, iwm_sta_cm_prio_tbl,
+			       sizeof(iwm_sta_cm_prio_tbl));
+			break;
+		default:
+			IWM_ERR(iwm, "Invalid coex_mode 0x%x\n",
+				iwm->conf.coexist_mode);
+			break;
+		}
+	} else
+		IWM_WARN(iwm, "coexistense disabled\n");
+
+	return iwm_send_lmac_ptrough_cmd(iwm, COEX_PRIORITY_TABLE_CMD,
+				&coex_table_cmd,
+				sizeof(struct iwm_coex_prio_table_cmd), 1);
+}
+
+int iwm_send_init_calib_cfg(struct iwm_priv *iwm, u8 calib_requested)
+{
+	struct iwm_lmac_cal_cfg_cmd cal_cfg_cmd;
+
+	memset(&cal_cfg_cmd, 0, sizeof(struct iwm_lmac_cal_cfg_cmd));
+
+	cal_cfg_cmd.ucode_cfg.init.enable = cpu_to_le32(calib_requested);
+	cal_cfg_cmd.ucode_cfg.init.start = cpu_to_le32(calib_requested);
+	cal_cfg_cmd.ucode_cfg.init.send_res = cpu_to_le32(calib_requested);
+	cal_cfg_cmd.ucode_cfg.flags =
+		cpu_to_le32(CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_AFTER_MSK);
+
+	return iwm_send_lmac_ptrough_cmd(iwm, CALIBRATION_CFG_CMD, &cal_cfg_cmd,
+				sizeof(struct iwm_lmac_cal_cfg_cmd), 1);
+}
+
+int iwm_send_periodic_calib_cfg(struct iwm_priv *iwm, u8 calib_requested)
+{
+	struct iwm_lmac_cal_cfg_cmd cal_cfg_cmd;
+
+	memset(&cal_cfg_cmd, 0, sizeof(struct iwm_lmac_cal_cfg_cmd));
+
+	cal_cfg_cmd.ucode_cfg.periodic.enable = cpu_to_le32(calib_requested);
+	cal_cfg_cmd.ucode_cfg.periodic.start = cpu_to_le32(calib_requested);
+
+	return iwm_send_lmac_ptrough_cmd(iwm, CALIBRATION_CFG_CMD, &cal_cfg_cmd,
+				sizeof(struct iwm_lmac_cal_cfg_cmd), 0);
+}
+
+int iwm_store_rxiq_calib_result(struct iwm_priv *iwm)
+{
+	struct iwm_calib_rxiq *rxiq;
+	u8 *eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
+	int grplen = sizeof(struct iwm_calib_rxiq_group);
+
+	rxiq = kzalloc(sizeof(struct iwm_calib_rxiq), GFP_KERNEL);
+	if (!rxiq) {
+		IWM_ERR(iwm, "Couldn't alloc memory for RX IQ\n");
+		return -ENOMEM;
+	}
+
+	eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
+	if (IS_ERR(eeprom_rxiq)) {
+		IWM_ERR(iwm, "Couldn't access EEPROM RX IQ entry\n");
+		return PTR_ERR(eeprom_rxiq);
+	}
+
+	iwm->calib_res[SHILOH_PHY_CALIBRATE_RX_IQ_CMD].buf = (u8 *)rxiq;
+	iwm->calib_res[SHILOH_PHY_CALIBRATE_RX_IQ_CMD].size = sizeof(*rxiq);
+
+	rxiq->hdr.opcode = SHILOH_PHY_CALIBRATE_RX_IQ_CMD;
+	rxiq->hdr.first_grp = 0;
+	rxiq->hdr.grp_num = 1;
+	rxiq->hdr.all_data_valid = 1;
+
+	memcpy(&rxiq->group[0], eeprom_rxiq, 4 * grplen);
+	memcpy(&rxiq->group[4], eeprom_rxiq + 6 * grplen, grplen);
+
+	return 0;
+}
+
+int iwm_send_calib_results(struct iwm_priv *iwm)
+{
+	int i, ret = 0;
+
+	for (i = PHY_CALIBRATE_OPCODES_NUM; i < CALIBRATION_CMD_NUM; i++) {
+		if (test_bit(i - PHY_CALIBRATE_OPCODES_NUM,
+			     &iwm->calib_done_map)) {
+			IWM_DBG_CMD(iwm, DBG,
+				    "Send calibration %d result\n", i);
+			ret |= iwm_send_lmac_ptrough_cmd(iwm,
+					REPLY_PHY_CALIBRATION_CMD,
+					iwm->calib_res[i].buf,
+					iwm->calib_res[i].size, 0);
+
+			kfree(iwm->calib_res[i].buf);
+			iwm->calib_res[i].buf = NULL;
+			iwm->calib_res[i].size = 0;
+		}
+	}
+
+	return ret;
+}
+
+int iwm_send_umac_reset(struct iwm_priv *iwm, __le32 reset_flags, bool resp)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_reset reset;
+
+	reset.flags = reset_flags;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_RESET;
+	umac_cmd.resp = resp;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, &reset,
+				     sizeof(struct iwm_umac_cmd_reset));
+}
+
+int iwm_umac_set_config_fix(struct iwm_priv *iwm, u16 tbl, u16 key, u32 value)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_set_param_fix param;
+
+	if ((tbl != UMAC_PARAM_TBL_CFG_FIX) &&
+	    (tbl != UMAC_PARAM_TBL_FA_CFG_FIX))
+		return -EINVAL;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_SET_PARAM_FIX;
+	umac_cmd.resp = 0;
+
+	param.tbl = cpu_to_le16(tbl);
+	param.key = cpu_to_le16(key);
+	param.value = cpu_to_le32(value);
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, &param,
+				     sizeof(struct iwm_umac_cmd_set_param_fix));
+}
+
+int iwm_umac_set_config_var(struct iwm_priv *iwm, u16 key,
+			    void *payload, u16 payload_size)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_set_param_var *param_hdr;
+	u8 *param;
+	int ret;
+
+	param = kzalloc(payload_size +
+			sizeof(struct iwm_umac_cmd_set_param_var), GFP_KERNEL);
+	if (!param) {
+		IWM_ERR(iwm, "Couldn't allocate param\n");
+		return -ENOMEM;
+	}
+
+	param_hdr = (struct iwm_umac_cmd_set_param_var *)param;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_SET_PARAM_VAR;
+	umac_cmd.resp = 0;
+
+	param_hdr->tbl = cpu_to_le16(UMAC_PARAM_TBL_CFG_VAR);
+	param_hdr->key = cpu_to_le16(key);
+	param_hdr->len = cpu_to_le16(payload_size);
+	memcpy(param + sizeof(struct iwm_umac_cmd_set_param_var),
+	       payload, payload_size);
+
+	ret = iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, param,
+				    sizeof(struct iwm_umac_cmd_set_param_var) +
+				    payload_size);
+	kfree(param);
+
+	return ret;
+}
+
+int iwm_send_umac_config(struct iwm_priv *iwm,
+			 __le32 reset_flags)
+{
+	int ret;
+
+	/* Use UMAC default values */
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_POWER_INDEX, iwm->conf.power_index);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX,
+				      CFG_FRAG_THRESHOLD,
+				      iwm->conf.frag_threshold);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_RTS_THRESHOLD,
+				      iwm->conf.rts_threshold);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_CTS_TO_SELF, iwm->conf.cts_to_self);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_COEX_MODE, iwm->conf.coexist_mode);
+	if (ret < 0)
+		return ret;
+
+	/*
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_ASSOCIATION_TIMEOUT,
+				      iwm->conf.assoc_timeout);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_ROAM_TIMEOUT,
+				      iwm->conf.roam_timeout);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_WIRELESS_MODE,
+				      WIRELESS_MODE_11A | WIRELESS_MODE_11G);
+	if (ret < 0)
+		return ret;
+	*/
+
+	ret = iwm_umac_set_config_var(iwm, CFG_NET_ADDR,
+				      iwm_to_ndev(iwm)->dev_addr, ETH_ALEN);
+	if (ret < 0)
+		return ret;
+
+	/* UMAC PM static configurations */
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_PM_LEGACY_RX_TIMEOUT, 0x12C);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_PM_LEGACY_TX_TIMEOUT, 0x15E);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_PM_CTRL_FLAGS, 0x30001);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				      CFG_PM_KEEP_ALIVE_IN_BEACONS, 0x80);
+	if (ret < 0)
+		return ret;
+
+	/* reset UMAC */
+	ret = iwm_send_umac_reset(iwm, reset_flags, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_RESET, IWM_SRC_UMAC,
+			       WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Wait for UMAC RESET timeout\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+int iwm_send_packet(struct iwm_priv *iwm, struct sk_buff *skb, int pool_id)
+{
+	struct iwm_udma_wifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_tx_info *tx_info = skb_to_tx_info(skb);
+
+	udma_cmd.eop = 1; /* always set eop for non-concatenated Tx */
+	udma_cmd.credit_group = pool_id;
+	udma_cmd.ra_tid = tx_info->sta << 4 | tx_info->tid;
+	udma_cmd.lmac_offset = 0;
+
+	umac_cmd.id = REPLY_TX;
+	umac_cmd.color = tx_info->color;
+	umac_cmd.resp = 0;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd,
+				     skb->data, skb->len);
+}
+
+static int iwm_target_read(struct iwm_priv *iwm, __le32 address,
+			   u8 *response, u32 resp_size)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	struct iwm_nonwifi_cmd *cmd;
+	u16 seq_num;
+	int ret = 0;
+
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_READ;
+	target_cmd.addr = address;
+	target_cmd.op1_sz = cpu_to_le32(resp_size);
+	target_cmd.op2 = 0;
+	target_cmd.handle_by_hw = 0;
+	target_cmd.resp = 1;
+	target_cmd.eop = 1;
+
+	ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
+	if (ret < 0)
+		IWM_ERR(iwm, "Couldn't send READ command\n");
+
+	/* When succeding, the send_target routine returns the seq number */
+	seq_num = ret;
+
+	ret = wait_event_interruptible_timeout(iwm->nonwifi_queue,
+		(cmd = iwm_get_pending_nonwifi_cmd(iwm, seq_num,
+					  UMAC_HDI_OUT_OPCODE_READ)) != NULL,
+					       2 * HZ);
+
+	if (!ret) {
+		IWM_ERR(iwm, "Didn't receive a target READ answer\n");
+		return ret;
+	}
+
+	memcpy(response, cmd->buf.hdr + sizeof(struct iwm_udma_in_hdr),
+	       resp_size);
+
+	kfree(cmd);
+
+	return ret;
+}
+
+int iwm_read_mac(struct iwm_priv *iwm, u8 *mac)
+{
+	int ret;
+	u8 mac_align[ALIGN(ETH_ALEN, 8)];
+
+	ret = iwm_target_read(iwm, cpu_to_le32(WICO_MAC_ADDRESS_ADDR),
+			      mac_align, sizeof(mac_align));
+	if (ret < 0)
+		return ret;
+
+	if (is_valid_ether_addr(mac_align))
+		memcpy(mac, mac_align, ETH_ALEN);
+	else {
+		IWM_ERR(iwm, "Invalid EEPROM MAC\n");
+		memcpy(mac, iwm->conf.mac_addr, ETH_ALEN);
+		get_random_bytes(&mac[3], 3);
+	}
+
+	return 0;
+}
+
+int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx)
+{
+	struct iwm_umac_tx_key_id tx_key_id;
+
+	if (!iwm->default_key || !iwm->default_key->in_use)
+		return -EINVAL;
+
+	tx_key_id.hdr.oid = UMAC_WIFI_IF_CMD_GLOBAL_TX_KEY_ID;
+	tx_key_id.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_tx_key_id) -
+					     sizeof(struct iwm_umac_wifi_if));
+
+	tx_key_id.key_idx = key_idx;
+
+	return iwm_send_wifi_if_cmd(iwm, &tx_key_id, sizeof(tx_key_id), 1);
+}
+
+static int iwm_check_profile(struct iwm_priv *iwm)
+{
+	if (!iwm->umac_profile_active)
+		return -EAGAIN;
+
+	if (iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_WEP_40 &&
+	    iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_WEP_104 &&
+	    iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_TKIP &&
+	    iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_CCMP) {
+		IWM_ERR(iwm, "Wrong unicast cipher: 0x%x\n",
+			iwm->umac_profile->sec.ucast_cipher);
+		return -EAGAIN;
+	}
+
+	if (iwm->umac_profile->sec.mcast_cipher != UMAC_CIPHER_TYPE_WEP_40 &&
+	    iwm->umac_profile->sec.mcast_cipher != UMAC_CIPHER_TYPE_WEP_104 &&
+	    iwm->umac_profile->sec.mcast_cipher != UMAC_CIPHER_TYPE_TKIP &&
+	    iwm->umac_profile->sec.mcast_cipher != UMAC_CIPHER_TYPE_CCMP) {
+		IWM_ERR(iwm, "Wrong multicast cipher: 0x%x\n",
+			iwm->umac_profile->sec.mcast_cipher);
+		return -EAGAIN;
+	}
+
+	if ((iwm->umac_profile->sec.ucast_cipher == UMAC_CIPHER_TYPE_WEP_40 ||
+	     iwm->umac_profile->sec.ucast_cipher == UMAC_CIPHER_TYPE_WEP_104) &&
+	    (iwm->umac_profile->sec.ucast_cipher !=
+	     iwm->umac_profile->sec.mcast_cipher)) {
+		IWM_ERR(iwm, "Unicast and multicast ciphers differ for WEP\n");
+	}
+
+	return 0;
+}
+
+int iwm_set_key(struct iwm_priv *iwm, bool remove, bool set_tx_key,
+		struct iwm_key *key)
+{
+	int ret;
+	u8 cmd[64], *sta_addr, *key_data, key_len;
+	s8 key_idx;
+	u16 cmd_size = 0;
+	struct iwm_umac_key_hdr *key_hdr = &key->hdr;
+	struct iwm_umac_key_wep40 *wep40 = (struct iwm_umac_key_wep40 *)cmd;
+	struct iwm_umac_key_wep104 *wep104 = (struct iwm_umac_key_wep104 *)cmd;
+	struct iwm_umac_key_tkip *tkip = (struct iwm_umac_key_tkip *)cmd;
+	struct iwm_umac_key_ccmp *ccmp = (struct iwm_umac_key_ccmp *)cmd;
+
+	if (set_tx_key)
+		iwm->default_key = key;
+
+	/*
+	 * We check if our current profile is valid.
+	 * If not, we dont push the key, we just cache them,
+	 * so that with the next siwsessid call, the keys
+	 * will be actually pushed.
+	 */
+	if (!remove) {
+		ret = iwm_check_profile(iwm);
+		if (ret < 0)
+			return ret;
+	}
+
+	sta_addr = key->hdr.mac;
+	key_data = key->key;
+	key_len = key->key_len;
+	key_idx = key->hdr.key_idx;
+
+	if (!remove) {
+		IWM_DBG_WEXT(iwm, DBG, "key_idx:%d set tx key:%d\n",
+			     key_idx, set_tx_key);
+		IWM_DBG_WEXT(iwm, DBG, "key_len:%d\n", key_len);
+		IWM_DBG_WEXT(iwm, DBG, "MAC:%pM, idx:%d, multicast:%d\n",
+		       key_hdr->mac, key_hdr->key_idx, key_hdr->multicast);
+
+		IWM_DBG_WEXT(iwm, DBG, "profile: mcast:0x%x, ucast:0x%x\n",
+			     iwm->umac_profile->sec.mcast_cipher,
+			     iwm->umac_profile->sec.ucast_cipher);
+		IWM_DBG_WEXT(iwm, DBG, "profile: auth_type:0x%x, flags:0x%x\n",
+			     iwm->umac_profile->sec.auth_type,
+			     iwm->umac_profile->sec.flags);
+
+		switch (key->alg) {
+		case UMAC_CIPHER_TYPE_WEP_40:
+			wep40->hdr.oid = UMAC_WIFI_IF_CMD_ADD_WEP40_KEY;
+			wep40->hdr.buf_size =
+				cpu_to_le16(sizeof(struct iwm_umac_key_wep40) -
+					    sizeof(struct iwm_umac_wifi_if));
+
+			memcpy(&wep40->key_hdr, key_hdr,
+			       sizeof(struct iwm_umac_key_hdr));
+			memcpy(wep40->key, key_data, key_len);
+			wep40->static_key = 1;
+
+			cmd_size = sizeof(struct iwm_umac_key_wep40);
+			break;
+
+		case UMAC_CIPHER_TYPE_WEP_104:
+			wep104->hdr.oid = UMAC_WIFI_IF_CMD_ADD_WEP104_KEY;
+			wep104->hdr.buf_size =
+				cpu_to_le16(sizeof(struct iwm_umac_key_wep104) -
+					    sizeof(struct iwm_umac_wifi_if));
+
+			memcpy(&wep104->key_hdr, key_hdr,
+			       sizeof(struct iwm_umac_key_hdr));
+			memcpy(wep104->key, key_data, key_len);
+			wep104->static_key = 1;
+
+			cmd_size = sizeof(struct iwm_umac_key_wep104);
+			break;
+
+		case UMAC_CIPHER_TYPE_CCMP:
+			key_hdr->key_idx++;
+			ccmp->hdr.oid = UMAC_WIFI_IF_CMD_ADD_CCMP_KEY;
+			ccmp->hdr.buf_size =
+				cpu_to_le16(sizeof(struct iwm_umac_key_ccmp) -
+					    sizeof(struct iwm_umac_wifi_if));
+
+			memcpy(&ccmp->key_hdr, key_hdr,
+			       sizeof(struct iwm_umac_key_hdr));
+
+			memcpy(ccmp->key, key_data, key_len);
+
+			if (key->flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+				memcpy(ccmp->iv_count, key->rx_seq, 6);
+
+			cmd_size = sizeof(struct iwm_umac_key_ccmp);
+			break;
+
+		case UMAC_CIPHER_TYPE_TKIP:
+			key_hdr->key_idx++;
+			tkip->hdr.oid = UMAC_WIFI_IF_CMD_ADD_TKIP_KEY;
+			tkip->hdr.buf_size =
+				cpu_to_le16(sizeof(struct iwm_umac_key_tkip) -
+					    sizeof(struct iwm_umac_wifi_if));
+
+			memcpy(&tkip->key_hdr, key_hdr,
+			       sizeof(struct iwm_umac_key_hdr));
+
+			memcpy(tkip->tkip_key, key_data, IWM_TKIP_KEY_SIZE);
+			memcpy(tkip->mic_tx_key, key_data + IWM_TKIP_KEY_SIZE,
+			       IWM_TKIP_MIC_SIZE);
+			memcpy(tkip->mic_rx_key,
+			       key_data + IWM_TKIP_KEY_SIZE + IWM_TKIP_MIC_SIZE,
+			       IWM_TKIP_MIC_SIZE);
+
+			if (key->flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+				memcpy(ccmp->iv_count, key->rx_seq, 6);
+
+			cmd_size = sizeof(struct iwm_umac_key_tkip);
+			break;
+
+		default:
+			return -ENOTSUPP;
+		}
+
+		if ((key->alg == UMAC_CIPHER_TYPE_CCMP) ||
+		    (key->alg == UMAC_CIPHER_TYPE_TKIP))
+			/*
+			 * UGLY_UGLY_UGLY
+			 * Copied HACK from the MWG driver.
+			 * Without it, the key is set before the second
+			 * EAPOL frame is sent, and the latter is thus
+			 * encrypted.
+			 */
+			schedule_timeout_interruptible(usecs_to_jiffies(300));
+
+		ret =  iwm_send_wifi_if_cmd(iwm, cmd, cmd_size, 1);
+		if (ret < 0)
+			goto err;
+
+		/*
+		 * We need a default key only if it is set and
+		 * if we're doing WEP.
+		 */
+		if (iwm->default_key == key &&
+			((key->alg == UMAC_CIPHER_TYPE_WEP_40) ||
+			 (key->alg == UMAC_CIPHER_TYPE_WEP_104))) {
+			ret = iwm_set_tx_key(iwm, key_idx);
+			if (ret < 0)
+				goto err;
+		}
+	} else {
+		struct iwm_umac_key_remove key_remove;
+
+		key_remove.hdr.oid = UMAC_WIFI_IF_CMD_REMOVE_KEY;
+		key_remove.hdr.buf_size =
+			cpu_to_le16(sizeof(struct iwm_umac_key_remove) -
+				    sizeof(struct iwm_umac_wifi_if));
+		memcpy(&key_remove.key_hdr, key_hdr,
+		       sizeof(struct iwm_umac_key_hdr));
+
+		ret =  iwm_send_wifi_if_cmd(iwm, &key_remove,
+					    sizeof(struct iwm_umac_key_remove),
+					    1);
+		if (ret < 0)
+			return ret;
+
+		iwm->keys[key_idx].in_use = 0;
+	}
+
+	return 0;
+
+ err:
+	kfree(key);
+	return ret;
+}
+
+
+int iwm_send_mlme_profile(struct iwm_priv *iwm)
+{
+	int ret, i;
+	struct iwm_umac_profile profile;
+
+	memcpy(&profile, iwm->umac_profile, sizeof(profile));
+
+	profile.hdr.oid = UMAC_WIFI_IF_CMD_SET_PROFILE;
+	profile.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_profile) -
+					   sizeof(struct iwm_umac_wifi_if));
+
+	ret = iwm_send_wifi_if_cmd(iwm, &profile, sizeof(profile), 1);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Send profile command failed\n");
+		return ret;
+	}
+
+	/* Wait for the profile to be active */
+	ret = wait_event_interruptible_timeout(iwm->mlme_queue,
+					       iwm->umac_profile_active == 1,
+					       3 * HZ);
+	if (!ret)
+		return -EBUSY;
+
+
+	for (i = 0; i < IWM_NUM_KEYS; i++)
+		if (iwm->keys[i].in_use) {
+			int default_key = 0;
+			struct iwm_key *key = &iwm->keys[i];
+
+			if (key == iwm->default_key)
+				default_key = 1;
+
+			/* Wait for the profile before sending the keys */
+			wait_event_interruptible_timeout(iwm->mlme_queue,
+			     (test_bit(IWM_STATUS_ASSOCIATING, &iwm->status) ||
+			      test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)),
+							 3 * HZ);
+
+			ret = iwm_set_key(iwm, 0, default_key, key);
+			if (ret < 0)
+				return ret;
+		}
+
+	return 0;
+}
+
+int iwm_invalidate_mlme_profile(struct iwm_priv *iwm)
+{
+	int ret;
+	struct iwm_umac_invalidate_profile invalid;
+
+	invalid.hdr.oid = UMAC_WIFI_IF_CMD_INVALIDATE_PROFILE;
+	invalid.hdr.buf_size =
+		cpu_to_le16(sizeof(struct iwm_umac_invalidate_profile) -
+			    sizeof(struct iwm_umac_wifi_if));
+
+	invalid.reason = WLAN_REASON_UNSPECIFIED;
+
+	ret = iwm_send_wifi_if_cmd(iwm, &invalid, sizeof(invalid), 1);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_event_interruptible_timeout(iwm->mlme_queue,
+				 (iwm->umac_profile_active == 0),
+					       2 * HZ);
+	if (!ret)
+		return -EBUSY;
+
+	return 0;
+}
+
+int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_stats_req stats_req;
+
+	stats_req.flags = cpu_to_le32(flags);
+
+	umac_cmd.id = UMAC_CMD_OPCODE_STATISTIC_REQUEST;
+	umac_cmd.resp = 0;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, &stats_req,
+				     sizeof(struct iwm_umac_cmd_stats_req));
+}
+
+int iwm_send_umac_channel_list(struct iwm_priv *iwm)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_get_channel_list *ch_list;
+	int size = sizeof(struct iwm_umac_cmd_get_channel_list) +
+		   sizeof(struct iwm_umac_channel_info) * 4;
+	int ret;
+
+	ch_list = kzalloc(size, GFP_KERNEL);
+	if (!ch_list) {
+		IWM_ERR(iwm, "Couldn't allocate channel list cmd\n");
+		return -ENOMEM;
+	}
+
+	ch_list->ch[0].band = UMAC_BAND_2GHZ;
+	ch_list->ch[0].type = UMAC_CHANNEL_WIDTH_20MHZ;
+	ch_list->ch[0].flags = UMAC_CHANNEL_FLAG_VALID;
+
+	ch_list->ch[1].band = UMAC_BAND_5GHZ;
+	ch_list->ch[1].type = UMAC_CHANNEL_WIDTH_20MHZ;
+	ch_list->ch[1].flags = UMAC_CHANNEL_FLAG_VALID;
+
+	ch_list->ch[2].band = UMAC_BAND_2GHZ;
+	ch_list->ch[2].type = UMAC_CHANNEL_WIDTH_20MHZ;
+	ch_list->ch[2].flags = UMAC_CHANNEL_FLAG_VALID | UMAC_CHANNEL_FLAG_IBSS;
+
+	ch_list->ch[3].band = UMAC_BAND_5GHZ;
+	ch_list->ch[3].type = UMAC_CHANNEL_WIDTH_20MHZ;
+	ch_list->ch[3].flags = UMAC_CHANNEL_FLAG_VALID | UMAC_CHANNEL_FLAG_IBSS;
+
+	ch_list->count = cpu_to_le16(4);
+
+	umac_cmd.id = UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST;
+	umac_cmd.resp = 1;
+
+	ret = iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, ch_list, size);
+
+	kfree(ch_list);
+
+	return ret;
+}
+
+int iwm_scan_ssids(struct iwm_priv *iwm, struct cfg80211_ssid *ssids,
+		   int ssid_num)
+{
+	struct iwm_umac_cmd_scan_request req;
+	int i, ret;
+
+	memset(&req, 0, sizeof(struct iwm_umac_cmd_scan_request));
+
+	req.hdr.oid = UMAC_WIFI_IF_CMD_SCAN_REQUEST;
+	req.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_cmd_scan_request)
+				       - sizeof(struct iwm_umac_wifi_if));
+	req.type = UMAC_WIFI_IF_SCAN_TYPE_USER;
+	req.timeout = 2;
+	req.seq_num = iwm->scan_id;
+	req.ssid_num = min(ssid_num, UMAC_WIFI_IF_PROBE_OPTION_MAX);
+
+	for (i = 0; i < req.ssid_num; i++) {
+		memcpy(req.ssids[i].ssid, ssids[i].ssid, ssids[i].ssid_len);
+		req.ssids[i].ssid_len = ssids[i].ssid_len;
+	}
+
+	ret = iwm_send_wifi_if_cmd(iwm, &req, sizeof(req), 0);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't send scan request\n");
+		return ret;
+	}
+
+	iwm->scan_id = iwm->scan_id++ % IWM_SCAN_ID_MAX;
+
+	return 0;
+}
+
+int iwm_scan_one_ssid(struct iwm_priv *iwm, u8 *ssid, int ssid_len)
+{
+	struct cfg80211_ssid one_ssid;
+
+	if (test_and_set_bit(IWM_STATUS_SCANNING, &iwm->status))
+		return 0;
+
+	one_ssid.ssid_len = min(ssid_len, IEEE80211_MAX_SSID_LEN);
+	memcpy(&one_ssid.ssid, ssid, one_ssid.ssid_len);
+
+	return iwm_scan_ssids(iwm, &one_ssid, 1);
+}
+
+int iwm_target_reset(struct iwm_priv *iwm)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_REBOOT;
+	target_cmd.addr = 0;
+	target_cmd.op1_sz = 0;
+	target_cmd.op2 = 0;
+	target_cmd.handle_by_hw = 0;
+	target_cmd.resp = 0;
+	target_cmd.eop = 1;
+
+	return iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h
new file mode 100644
index 00000000000..36b13a13059
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/commands.h
@@ -0,0 +1,419 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_COMMANDS_H__
+#define __IWM_COMMANDS_H__
+
+#include <linux/ieee80211.h>
+
+#define IWM_BARKER_REBOOT_NOTIFICATION	0xF
+#define IWM_ACK_BARKER_NOTIFICATION	0x10
+
+/* UMAC commands */
+#define UMAC_RST_CTRL_FLG_LARC_CLK_EN	0x0001
+#define UMAC_RST_CTRL_FLG_LARC_RESET	0x0002
+#define UMAC_RST_CTRL_FLG_FUNC_RESET	0x0004
+#define UMAC_RST_CTRL_FLG_DEV_RESET	0x0008
+#define UMAC_RST_CTRL_FLG_WIFI_CORE_EN	0x0010
+#define UMAC_RST_CTRL_FLG_WIFI_LINK_EN	0x0040
+#define UMAC_RST_CTRL_FLG_WIFI_MLME_EN	0x0080
+#define UMAC_RST_CTRL_FLG_NVM_RELOAD	0x0100
+
+struct iwm_umac_cmd_reset {
+	__le32 flags;
+} __attribute__ ((packed));
+
+#define UMAC_PARAM_TBL_ORD_FIX    0x0
+#define UMAC_PARAM_TBL_ORD_VAR    0x1
+#define UMAC_PARAM_TBL_CFG_FIX    0x2
+#define UMAC_PARAM_TBL_CFG_VAR    0x3
+#define UMAC_PARAM_TBL_BSS_TRK    0x4
+#define UMAC_PARAM_TBL_FA_CFG_FIX 0x5
+#define UMAC_PARAM_TBL_STA        0x6
+#define UMAC_PARAM_TBL_CHN        0x7
+#define UMAC_PARAM_TBL_STATISTICS 0x8
+
+/* fast access table */
+enum {
+	CFG_FRAG_THRESHOLD = 0,
+	CFG_FRAME_RETRY_LIMIT,
+	CFG_OS_QUEUE_UTIL_TH,
+	CFG_RX_FILTER,
+	/* <-- LAST --> */
+	FAST_ACCESS_CFG_TBL_FIX_LAST
+};
+
+/* fixed size table */
+enum {
+	CFG_POWER_INDEX = 0,
+	CFG_PM_LEGACY_RX_TIMEOUT,
+	CFG_PM_LEGACY_TX_TIMEOUT,
+	CFG_PM_CTRL_FLAGS,
+	CFG_PM_KEEP_ALIVE_IN_BEACONS,
+	CFG_BT_ON_THRESHOLD,
+	CFG_RTS_THRESHOLD,
+	CFG_CTS_TO_SELF,
+	CFG_COEX_MODE,
+	CFG_WIRELESS_MODE,
+	CFG_ASSOCIATION_TIMEOUT,
+	CFG_ROAM_TIMEOUT,
+	CFG_CAPABILITY_SUPPORTED_RATES,
+	CFG_SCAN_ALLOWED_UNASSOC_FLAGS,
+	CFG_SCAN_ALLOWED_MAIN_ASSOC_FLAGS,
+	CFG_SCAN_ALLOWED_PAN_ASSOC_FLAGS,
+	CFG_SCAN_INTERNAL_PERIODIC_ENABLED,
+	CFG_SCAN_IMM_INTERNAL_PERIODIC_SCAN_ON_INIT,
+	CFG_SCAN_DEFAULT_PERIODIC_FREQ_SEC,
+	CFG_SCAN_NUM_PASSIVE_CHAN_PER_PARTIAL_SCAN,
+	CFG_TLC_SUPPORTED_TX_HT_RATES,
+	CFG_TLC_SUPPORTED_TX_RATES,
+	CFG_TLC_VALID_ANTENNA,
+	CFG_TLC_SPATIAL_STREAM_SUPPORTED,
+	CFG_TLC_RETRY_PER_RATE,
+	CFG_TLC_RETRY_PER_HT_RATE,
+	CFG_TLC_FIXED_RATE,
+	CFG_TLC_FIXED_RATE_FLAGS,
+	CFG_TLC_CONTROL_FLAGS,
+	CFG_TLC_SR_MIN_FAIL,
+	CFG_TLC_SR_MIN_PASS,
+	CFG_TLC_HT_STAY_IN_COL_PASS_THRESH,
+	CFG_TLC_HT_STAY_IN_COL_FAIL_THRESH,
+	CFG_TLC_LEGACY_STAY_IN_COL_PASS_THRESH,
+	CFG_TLC_LEGACY_STAY_IN_COL_FAIL_THRESH,
+	CFG_TLC_HT_FLUSH_STATS_PACKETS,
+	CFG_TLC_LEGACY_FLUSH_STATS_PACKETS,
+	CFG_TLC_LEGACY_FLUSH_STATS_MS,
+	CFG_TLC_HT_FLUSH_STATS_MS,
+	CFG_TLC_STAY_IN_COL_TIME_OUT,
+	CFG_TLC_AGG_SHORT_LIM,
+	CFG_TLC_AGG_LONG_LIM,
+	CFG_TLC_HT_SR_NO_DECREASE,
+	CFG_TLC_LEGACY_SR_NO_DECREASE,
+	CFG_TLC_SR_FORCE_DECREASE,
+	CFG_TLC_SR_ALLOW_INCREASE,
+	CFG_TLC_AGG_SET_LONG,
+	CFG_TLC_AUTO_AGGREGATION,
+	CFG_TLC_AGG_THRESHOLD,
+	CFG_TLC_TID_LOAD_THRESHOLD,
+	CFG_TLC_BLOCK_ACK_TIMEOUT,
+	CFG_TLC_NO_BA_COUNTED_AS_ONE,
+	CFG_TLC_NUM_BA_STREAMS_ALLOWED,
+	CFG_TLC_NUM_BA_STREAMS_PRESENT,
+	CFG_TLC_RENEW_ADDBA_DELAY,
+	CFG_TLC_NUM_OF_MULTISEC_TO_COUN_LOAD,
+	CFG_TLC_IS_STABLE_IN_HT,
+	CFG_RLC_CHAIN_CTRL,
+	CFG_TRK_TABLE_OP_MODE,
+	CFG_TRK_TABLE_RSSI_THRESHOLD,
+	CFG_TX_PWR_TARGET, /* Used By xVT */
+	CFG_TX_PWR_LIMIT_USR,
+	CFG_TX_PWR_LIMIT_BSS, /* 11d limit */
+	CFG_TX_PWR_LIMIT_BSS_CONSTRAINT, /* 11h constraint */
+	CFG_TX_PWR_MODE,
+	CFG_MLME_DBG_NOTIF_BLOCK,
+	CFG_BT_OFF_BECONS_INTERVALS,
+	CFG_BT_FRAG_DURATION,
+
+	/* <-- LAST --> */
+	CFG_TBL_FIX_LAST
+};
+
+/* variable size table */
+enum {
+	CFG_NET_ADDR = 0,
+	CFG_PROFILE,
+	/* <-- LAST --> */
+	CFG_TBL_VAR_LAST
+};
+
+struct iwm_umac_cmd_set_param_fix {
+	__le16 tbl;
+	__le16 key;
+	__le32 value;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_set_param_var {
+	__le16 tbl;
+	__le16 key;
+	__le16 len;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_get_param {
+	__le16 tbl;
+	__le16 key;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_get_param_resp {
+	__le16 tbl;
+	__le16 key;
+	__le16 len;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_eeprom_proxy_hdr {
+	__le32 type;
+	__le32 offset;
+	__le32 len;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_eeprom_proxy {
+	struct iwm_umac_cmd_eeprom_proxy_hdr hdr;
+	u8 buf[0];
+} __attribute__ ((packed));
+
+#define IWM_UMAC_CMD_EEPROM_TYPE_READ       0x1
+#define IWM_UMAC_CMD_EEPROM_TYPE_WRITE      0x2
+
+#define UMAC_CHANNEL_FLAG_VALID		BIT(0)
+#define UMAC_CHANNEL_FLAG_IBSS		BIT(1)
+#define UMAC_CHANNEL_FLAG_ACTIVE	BIT(3)
+#define UMAC_CHANNEL_FLAG_RADAR		BIT(4)
+#define UMAC_CHANNEL_FLAG_DFS		BIT(7)
+
+struct iwm_umac_channel_info {
+	u8 band;
+	u8 type;
+	u8 reserved;
+	u8 flags;
+	__le32 channels_mask;
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_get_channel_list {
+	__le16 count;
+	__le16 reserved;
+	struct iwm_umac_channel_info ch[0];
+} __attribute__ ((packed));
+
+
+/* UMAC WiFi interface commands */
+
+/* Coexistence mode */
+#define COEX_MODE_SA  0x1
+#define COEX_MODE_XOR 0x2
+#define COEX_MODE_CM  0x3
+#define COEX_MODE_MAX 0x4
+
+/* Wireless mode */
+#define WIRELESS_MODE_11A  0x1
+#define WIRELESS_MODE_11G  0x2
+
+#define UMAC_PROFILE_EX_IE_REQUIRED	0x1
+#define UMAC_PROFILE_QOS_ALLOWED	0x2
+
+/* Scanning */
+#define UMAC_WIFI_IF_PROBE_OPTION_MAX        10
+
+#define UMAC_WIFI_IF_SCAN_TYPE_USER          0x0
+#define UMAC_WIFI_IF_SCAN_TYPE_UMAC_RESERVED 0x1
+#define UMAC_WIFI_IF_SCAN_TYPE_HOST_PERIODIC 0x2
+#define UMAC_WIFI_IF_SCAN_TYPE_MAX           0x3
+
+struct iwm_umac_ssid {
+	u8 ssid_len;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_scan_request {
+	struct iwm_umac_wifi_if hdr;
+	__le32 type; /* UMAC_WIFI_IF_SCAN_TYPE_* */
+	u8 ssid_num;
+	u8 seq_num;
+	u8 timeout; /* In seconds */
+	u8 reserved;
+	struct iwm_umac_ssid ssids[UMAC_WIFI_IF_PROBE_OPTION_MAX];
+} __attribute__ ((packed));
+
+#define UMAC_CIPHER_TYPE_NONE		0xFF
+#define UMAC_CIPHER_TYPE_USE_GROUPCAST	0x00
+#define UMAC_CIPHER_TYPE_WEP_40		0x01
+#define UMAC_CIPHER_TYPE_WEP_104	0x02
+#define UMAC_CIPHER_TYPE_TKIP		0x04
+#define UMAC_CIPHER_TYPE_CCMP		0x08
+
+/* Supported authentication types - bitmap */
+#define UMAC_AUTH_TYPE_OPEN		0x00
+#define UMAC_AUTH_TYPE_LEGACY_PSK	0x01
+#define UMAC_AUTH_TYPE_8021X		0x02
+#define UMAC_AUTH_TYPE_RSNA_PSK		0x04
+
+/* iwm_umac_security.flag is WPA supported -- bits[0:0] */
+#define UMAC_SEC_FLG_WPA_ON_POS		0
+#define UMAC_SEC_FLG_WPA_ON_SEED	1
+#define UMAC_SEC_FLG_WPA_ON_MSK (UMAC_SEC_FLG_WPA_ON_SEED << \
+				 UMAC_SEC_FLG_WPA_ON_POS)
+
+/* iwm_umac_security.flag is WPA2 supported -- bits [1:1] */
+#define UMAC_SEC_FLG_RSNA_ON_POS	1
+#define UMAC_SEC_FLG_RSNA_ON_SEED	1
+#define UMAC_SEC_FLG_RSNA_ON_MSK        (UMAC_SEC_FLG_RSNA_ON_SEED << \
+					 UMAC_SEC_FLG_RSNA_ON_POS)
+
+/* iwm_umac_security.flag is WSC mode on -- bits [2:2] */
+#define UMAC_SEC_FLG_WSC_ON_POS		2
+#define UMAC_SEC_FLG_WSC_ON_SEED	1
+
+/* Legacy profile can use only WEP40 and WEP104 for encryption and
+ * OPEN or PSK for authentication */
+#define UMAC_SEC_FLG_LEGACY_PROFILE	0
+
+struct iwm_umac_security {
+	u8 auth_type;
+	u8 ucast_cipher;
+	u8 mcast_cipher;
+	u8 flags;
+} __attribute__ ((packed));
+
+struct iwm_umac_ibss {
+	u8 beacon_interval;	/* in millisecond */
+	u8 atim;		/* in millisecond */
+	s8 join_only;
+	u8 band;
+	u8 channel;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+#define UMAC_MODE_BSS	0
+#define UMAC_MODE_IBSS	1
+
+#define UMAC_BSSID_MAX	4
+
+struct iwm_umac_profile {
+	struct iwm_umac_wifi_if hdr;
+	__le32 mode;
+	struct iwm_umac_ssid ssid;
+	u8 bssid[UMAC_BSSID_MAX][ETH_ALEN];
+	struct iwm_umac_security sec;
+	struct iwm_umac_ibss ibss;
+	__le32 channel_2ghz;
+	__le32 channel_5ghz;
+	__le16 flags;
+	u8 wireless_mode;
+	u8 bss_num;
+} __attribute__ ((packed));
+
+struct iwm_umac_invalidate_profile {
+	struct iwm_umac_wifi_if hdr;
+	u8 reason;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+/* Encryption key commands */
+struct iwm_umac_key_wep40 {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+	u8 key[WLAN_KEY_LEN_WEP40];
+	u8 static_key;
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+struct iwm_umac_key_wep104 {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+	u8 key[WLAN_KEY_LEN_WEP104];
+	u8 static_key;
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+#define IWM_TKIP_KEY_SIZE 16
+#define IWM_TKIP_MIC_SIZE 8
+struct iwm_umac_key_tkip {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+	u8 iv_count[6];
+	u8 reserved[2];
+	u8 tkip_key[IWM_TKIP_KEY_SIZE];
+	u8 mic_rx_key[IWM_TKIP_MIC_SIZE];
+	u8 mic_tx_key[IWM_TKIP_MIC_SIZE];
+} __attribute__ ((packed));
+
+struct iwm_umac_key_ccmp {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+	u8 iv_count[6];
+	u8 reserved[2];
+	u8 key[WLAN_KEY_LEN_CCMP];
+} __attribute__ ((packed));
+
+struct iwm_umac_key_remove {
+	struct iwm_umac_wifi_if hdr;
+	struct iwm_umac_key_hdr key_hdr;
+} __attribute__ ((packed));
+
+struct iwm_umac_tx_key_id {
+	struct iwm_umac_wifi_if hdr;
+	u8 key_idx;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct iwm_umac_cmd_stats_req {
+	__le32 flags;
+} __attribute__ ((packed));
+
+/* LMAC commands */
+int iwm_read_mac(struct iwm_priv *iwm, u8 *mac);
+int iwm_send_prio_table(struct iwm_priv *iwm);
+int iwm_send_init_calib_cfg(struct iwm_priv *iwm, u8 calib_requested);
+int iwm_send_periodic_calib_cfg(struct iwm_priv *iwm, u8 calib_requested);
+int iwm_send_calib_results(struct iwm_priv *iwm);
+int iwm_store_rxiq_calib_result(struct iwm_priv *iwm);
+
+/* UMAC commands */
+int iwm_send_wifi_if_cmd(struct iwm_priv *iwm, void *payload, u16 payload_size,
+			 bool resp);
+int iwm_send_umac_reset(struct iwm_priv *iwm, __le32 reset_flags, bool resp);
+int iwm_umac_set_config_fix(struct iwm_priv *iwm, u16 tbl, u16 key, u32 value);
+int iwm_umac_set_config_var(struct iwm_priv *iwm, u16 key,
+			    void *payload, u16 payload_size);
+int iwm_send_umac_config(struct iwm_priv *iwm, __le32 reset_flags);
+int iwm_send_mlme_profile(struct iwm_priv *iwm);
+int iwm_invalidate_mlme_profile(struct iwm_priv *iwm);
+int iwm_send_packet(struct iwm_priv *iwm, struct sk_buff *skb, int pool_id);
+int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx);
+int iwm_set_key(struct iwm_priv *iwm, bool remove, bool set_tx_key,
+		struct iwm_key *key);
+int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags);
+int iwm_send_umac_channel_list(struct iwm_priv *iwm);
+int iwm_scan_ssids(struct iwm_priv *iwm, struct cfg80211_ssid *ssids,
+		   int ssid_num);
+int iwm_scan_one_ssid(struct iwm_priv *iwm, u8 *ssid, int ssid_len);
+
+/* UDMA commands */
+int iwm_target_reset(struct iwm_priv *iwm);
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/debug.h b/drivers/net/wireless/iwmc3200wifi/debug.h
new file mode 100644
index 00000000000..8fbb42d9c21
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/debug.h
@@ -0,0 +1,124 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#ifndef __IWM_DEBUG_H__
+#define __IWM_DEBUG_H__
+
+#define IWM_ERR(p, f, a...) dev_err(iwm_to_dev(p), f, ## a)
+#define IWM_WARN(p, f, a...) dev_warn(iwm_to_dev(p), f, ## a)
+#define IWM_INFO(p, f, a...) dev_info(iwm_to_dev(p), f, ## a)
+#define IWM_CRIT(p, f, a...) dev_crit(iwm_to_dev(p), f, ## a)
+
+#ifdef CONFIG_IWM_DEBUG
+
+#define IWM_DEBUG_MODULE(i, level, module, f, a...)			     \
+do {									     \
+	if (unlikely(i->dbg.dbg_module[IWM_DM_##module] >= (IWM_DL_##level)))\
+		dev_printk(KERN_INFO, (iwm_to_dev(i)),	             \
+			   "%s " f, __func__ , ## a);			     \
+} while (0)
+
+#define IWM_HEXDUMP(i, level, module, pref, buf, len)		             \
+do {									     \
+	if (unlikely(i->dbg.dbg_module[IWM_DM_##module] >= (IWM_DL_##level)))\
+		print_hex_dump(KERN_INFO, pref, DUMP_PREFIX_OFFSET,	     \
+			       16, 1, buf, len, 1);			     \
+} while (0)
+
+#else
+
+#define IWM_DEBUG_MODULE(i, level, module, f, a...)
+#define IWM_HEXDUMP(i, level, module, pref, buf, len)
+
+#endif /* CONFIG_IWM_DEBUG */
+
+/* Debug modules */
+enum iwm_debug_module_id {
+	IWM_DM_BOOT = 0,
+	IWM_DM_FW,
+	IWM_DM_SDIO,
+	IWM_DM_NTF,
+	IWM_DM_RX,
+	IWM_DM_TX,
+	IWM_DM_MLME,
+	IWM_DM_CMD,
+	IWM_DM_WEXT,
+	__IWM_DM_NR,
+};
+#define IWM_DM_DEFAULT 0
+
+#define IWM_DBG_BOOT(i, l, f, a...) IWM_DEBUG_MODULE(i, l, BOOT, f, ## a)
+#define IWM_DBG_FW(i, l, f, a...)   IWM_DEBUG_MODULE(i, l, FW, f, ## a)
+#define IWM_DBG_SDIO(i, l, f, a...) IWM_DEBUG_MODULE(i, l, SDIO, f, ## a)
+#define IWM_DBG_NTF(i, l, f, a...)  IWM_DEBUG_MODULE(i, l, NTF, f, ## a)
+#define IWM_DBG_RX(i, l, f, a...)   IWM_DEBUG_MODULE(i, l, RX, f, ## a)
+#define IWM_DBG_TX(i, l, f, a...)   IWM_DEBUG_MODULE(i, l, TX, f, ## a)
+#define IWM_DBG_MLME(i, l, f, a...) IWM_DEBUG_MODULE(i, l, MLME, f, ## a)
+#define IWM_DBG_CMD(i, l, f, a...)  IWM_DEBUG_MODULE(i, l, CMD, f, ## a)
+#define IWM_DBG_WEXT(i, l, f, a...) IWM_DEBUG_MODULE(i, l, WEXT, f, ## a)
+
+/* Debug levels */
+enum iwm_debug_level {
+	IWM_DL_NONE = 0,
+	IWM_DL_ERR,
+	IWM_DL_WARN,
+	IWM_DL_INFO,
+	IWM_DL_DBG,
+};
+#define IWM_DL_DEFAULT IWM_DL_ERR
+
+struct iwm_debugfs {
+	struct iwm_priv *iwm;
+	struct dentry *rootdir;
+	struct dentry *devdir;
+	struct dentry *dbgdir;
+	struct dentry *txdir;
+	struct dentry *rxdir;
+	struct dentry *busdir;
+
+	u32 dbg_level;
+	struct dentry *dbg_level_dentry;
+
+	unsigned long dbg_modules;
+	struct dentry *dbg_modules_dentry;
+
+	u8 dbg_module[__IWM_DM_NR];
+	struct dentry *dbg_module_dentries[__IWM_DM_NR];
+
+	struct dentry *txq_dentry;
+	struct dentry *tx_credit_dentry;
+	struct dentry *rx_ticket_dentry;
+};
+
+#ifdef CONFIG_IWM_DEBUG
+int iwm_debugfs_init(struct iwm_priv *iwm);
+void iwm_debugfs_exit(struct iwm_priv *iwm);
+#else
+static inline int iwm_debugfs_init(struct iwm_priv *iwm)
+{
+	return 0;
+}
+static inline void iwm_debugfs_exit(struct iwm_priv *iwm) {}
+#endif
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c
new file mode 100644
index 00000000000..0fa7b9150d5
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c
@@ -0,0 +1,453 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "rx.h"
+#include "debug.h"
+
+static struct {
+	u8 id;
+	char *name;
+} iwm_debug_module[__IWM_DM_NR] = {
+	 {IWM_DM_BOOT, "boot"},
+	 {IWM_DM_FW,   "fw"},
+	 {IWM_DM_SDIO, "sdio"},
+	 {IWM_DM_NTF,  "ntf"},
+	 {IWM_DM_RX,   "rx"},
+	 {IWM_DM_TX,   "tx"},
+	 {IWM_DM_MLME, "mlme"},
+	 {IWM_DM_CMD,  "cmd"},
+	 {IWM_DM_WEXT,  "wext"},
+};
+
+#define add_dbg_module(dbg, name, id, initlevel) 	\
+do {							\
+	struct dentry *d;				\
+	dbg.dbg_module[id] = (initlevel);		\
+	d = debugfs_create_x8(name, 0600, dbg.dbgdir,	\
+			     &(dbg.dbg_module[id]));	\
+	if (!IS_ERR(d))					\
+		dbg.dbg_module_dentries[id] = d;        \
+} while (0)
+
+static int iwm_debugfs_u32_read(void *data, u64 *val)
+{
+	struct iwm_priv *iwm = data;
+
+	*val = iwm->dbg.dbg_level;
+	return 0;
+}
+
+static int iwm_debugfs_dbg_level_write(void *data, u64 val)
+{
+	struct iwm_priv *iwm = data;
+	int i;
+
+	iwm->dbg.dbg_level = val;
+
+	for (i = 0; i < __IWM_DM_NR; i++)
+		iwm->dbg.dbg_module[i] = val;
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_iwm_dbg_level,
+			iwm_debugfs_u32_read, iwm_debugfs_dbg_level_write,
+			"%llu\n");
+
+static int iwm_debugfs_dbg_modules_write(void *data, u64 val)
+{
+	struct iwm_priv *iwm = data;
+	int i, bit;
+
+	iwm->dbg.dbg_modules = val;
+
+	for (i = 0; i < __IWM_DM_NR; i++)
+		iwm->dbg.dbg_module[i] = 0;
+
+	for_each_bit(bit, &iwm->dbg.dbg_modules, __IWM_DM_NR)
+		iwm->dbg.dbg_module[bit] = iwm->dbg.dbg_level;
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_iwm_dbg_modules,
+			iwm_debugfs_u32_read, iwm_debugfs_dbg_modules_write,
+			"%llu\n");
+
+static int iwm_txrx_open(struct inode *inode, struct file *filp)
+{
+	filp->private_data = inode->i_private;
+	return 0;
+}
+
+
+static ssize_t iwm_debugfs_txq_read(struct file *filp, char __user *buffer,
+				   size_t count, loff_t *ppos)
+{
+	struct iwm_priv *iwm = filp->private_data;
+	char *buf;
+	int i, buf_len = 4096;
+	size_t len = 0;
+	ssize_t ret;
+
+	if (*ppos != 0)
+		return 0;
+	if (count < sizeof(buf))
+		return -ENOSPC;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	for (i = 0; i < IWM_TX_QUEUES; i++) {
+		struct iwm_tx_queue *txq = &iwm->txq[i];
+		struct sk_buff *skb;
+		int j;
+		unsigned long flags;
+
+		spin_lock_irqsave(&txq->queue.lock, flags);
+
+		skb = (struct sk_buff *)&txq->queue;
+
+		len += snprintf(buf + len, buf_len - len, "TXQ #%d\n", i);
+		len += snprintf(buf + len, buf_len - len, "\tStopped:     %d\n",
+				__netif_subqueue_stopped(iwm_to_ndev(iwm),
+							 txq->id));
+		len += snprintf(buf + len, buf_len - len, "\tConcat count:%d\n",
+				txq->concat_count);
+		len += snprintf(buf + len, buf_len - len, "\tQueue len:   %d\n",
+				skb_queue_len(&txq->queue));
+		for (j = 0; j < skb_queue_len(&txq->queue); j++) {
+			struct iwm_tx_info *tx_info;
+
+			skb = skb->next;
+			tx_info = skb_to_tx_info(skb);
+
+			len += snprintf(buf + len, buf_len - len,
+					"\tSKB #%d\n", j);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\tsta:   %d\n", tx_info->sta);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\tcolor: %d\n", tx_info->color);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\ttid:   %d\n", tx_info->tid);
+		}
+
+		spin_unlock_irqrestore(&txq->queue.lock, flags);
+	}
+
+	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+	kfree(buf);
+
+	return ret;
+}
+
+static ssize_t iwm_debugfs_tx_credit_read(struct file *filp,
+					  char __user *buffer,
+					  size_t count, loff_t *ppos)
+{
+	struct iwm_priv *iwm = filp->private_data;
+	struct iwm_tx_credit *credit = &iwm->tx_credit;
+	char *buf;
+	int i, buf_len = 4096;
+	size_t len = 0;
+	ssize_t ret;
+
+	if (*ppos != 0)
+		return 0;
+	if (count < sizeof(buf))
+		return -ENOSPC;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	len += snprintf(buf + len, buf_len - len,
+			"NR pools:  %d\n", credit->pool_nr);
+	len += snprintf(buf + len, buf_len - len,
+			"pools map: 0x%lx\n", credit->full_pools_map);
+
+	len += snprintf(buf + len, buf_len - len, "\n### POOLS ###\n");
+	for (i = 0; i < IWM_MACS_OUT_GROUPS; i++) {
+		len += snprintf(buf + len, buf_len - len,
+				"pools entry #%d\n", i);
+		len += snprintf(buf + len, buf_len - len,
+				"\tid:          %d\n",
+				credit->pools[i].id);
+		len += snprintf(buf + len, buf_len - len,
+				"\tsid:         %d\n",
+				credit->pools[i].sid);
+		len += snprintf(buf + len, buf_len - len,
+				"\tmin_pages:   %d\n",
+				credit->pools[i].min_pages);
+		len += snprintf(buf + len, buf_len - len,
+				"\tmax_pages:   %d\n",
+				credit->pools[i].max_pages);
+		len += snprintf(buf + len, buf_len - len,
+				"\talloc_pages: %d\n",
+				credit->pools[i].alloc_pages);
+		len += snprintf(buf + len, buf_len - len,
+				"\tfreed_pages: %d\n",
+				credit->pools[i].total_freed_pages);
+	}
+
+	len += snprintf(buf + len, buf_len - len, "\n### SPOOLS ###\n");
+	for (i = 0; i < IWM_MACS_OUT_SGROUPS; i++) {
+		len += snprintf(buf + len, buf_len - len,
+				"spools entry #%d\n", i);
+		len += snprintf(buf + len, buf_len - len,
+				"\tid:          %d\n",
+				credit->spools[i].id);
+		len += snprintf(buf + len, buf_len - len,
+				"\tmax_pages:   %d\n",
+				credit->spools[i].max_pages);
+		len += snprintf(buf + len, buf_len - len,
+				"\talloc_pages: %d\n",
+				credit->spools[i].alloc_pages);
+
+	}
+
+	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+	kfree(buf);
+
+	return ret;
+}
+
+static ssize_t iwm_debugfs_rx_ticket_read(struct file *filp,
+					  char __user *buffer,
+					  size_t count, loff_t *ppos)
+{
+	struct iwm_priv *iwm = filp->private_data;
+	struct iwm_rx_ticket_node *ticket, *next;
+	char *buf;
+	int buf_len = 4096, i;
+	size_t len = 0;
+	ssize_t ret;
+
+	if (*ppos != 0)
+		return 0;
+	if (count < sizeof(buf))
+		return -ENOSPC;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	list_for_each_entry_safe(ticket, next, &iwm->rx_tickets, node) {
+		len += snprintf(buf + len, buf_len - len, "Ticket #%d\n",
+				ticket->ticket->id);
+		len += snprintf(buf + len, buf_len - len, "\taction: 0x%x\n",
+				ticket->ticket->action);
+		len += snprintf(buf + len, buf_len - len, "\tflags:  0x%x\n",
+				ticket->ticket->flags);
+	}
+
+	for (i = 0; i < IWM_RX_ID_HASH; i++) {
+		struct iwm_rx_packet *packet, *nxt;
+		struct list_head *pkt_list = &iwm->rx_packets[i];
+		if (!list_empty(pkt_list)) {
+			len += snprintf(buf + len, buf_len - len,
+					"Packet hash #%d\n", i);
+			list_for_each_entry_safe(packet, nxt, pkt_list, node) {
+				len += snprintf(buf + len, buf_len - len,
+						"\tPacket id:     %d\n",
+						packet->id);
+				len += snprintf(buf + len, buf_len - len,
+						"\tPacket length: %lu\n",
+						packet->pkt_size);
+			}
+		}
+	}
+
+	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+	kfree(buf);
+
+	return ret;
+}
+
+
+static const struct file_operations iwm_debugfs_txq_fops = {
+	.owner =	THIS_MODULE,
+	.open =		iwm_txrx_open,
+	.read =		iwm_debugfs_txq_read,
+};
+
+static const struct file_operations iwm_debugfs_tx_credit_fops = {
+	.owner =	THIS_MODULE,
+	.open =		iwm_txrx_open,
+	.read =		iwm_debugfs_tx_credit_read,
+};
+
+static const struct file_operations iwm_debugfs_rx_ticket_fops = {
+	.owner =	THIS_MODULE,
+	.open =		iwm_txrx_open,
+	.read =		iwm_debugfs_rx_ticket_read,
+};
+
+int iwm_debugfs_init(struct iwm_priv *iwm)
+{
+	int i, result;
+	char devdir[16];
+
+	iwm->dbg.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	result = PTR_ERR(iwm->dbg.rootdir);
+	if (!result || IS_ERR(iwm->dbg.rootdir)) {
+		if (result == -ENODEV) {
+			IWM_ERR(iwm, "DebugFS (CONFIG_DEBUG_FS) not "
+				"enabled in kernel config\n");
+			result = 0;	/* No debugfs support */
+		}
+		IWM_ERR(iwm, "Couldn't create rootdir: %d\n", result);
+		goto error;
+	}
+
+	snprintf(devdir, sizeof(devdir), "%s", wiphy_name(iwm_to_wiphy(iwm)));
+
+	iwm->dbg.devdir = debugfs_create_dir(devdir, iwm->dbg.rootdir);
+	result = PTR_ERR(iwm->dbg.devdir);
+	if (IS_ERR(iwm->dbg.devdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create devdir: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.dbgdir = debugfs_create_dir("debug", iwm->dbg.devdir);
+	result = PTR_ERR(iwm->dbg.dbgdir);
+	if (IS_ERR(iwm->dbg.dbgdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create dbgdir: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.rxdir = debugfs_create_dir("rx", iwm->dbg.devdir);
+	result = PTR_ERR(iwm->dbg.rxdir);
+	if (IS_ERR(iwm->dbg.rxdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create rx dir: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.txdir = debugfs_create_dir("tx", iwm->dbg.devdir);
+	result = PTR_ERR(iwm->dbg.txdir);
+	if (IS_ERR(iwm->dbg.txdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create tx dir: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.busdir = debugfs_create_dir("bus", iwm->dbg.devdir);
+	result = PTR_ERR(iwm->dbg.busdir);
+	if (IS_ERR(iwm->dbg.busdir) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create bus dir: %d\n", result);
+		goto error;
+	}
+
+	if (iwm->bus_ops->debugfs_init) {
+		result = iwm->bus_ops->debugfs_init(iwm, iwm->dbg.busdir);
+		if (result < 0) {
+			IWM_ERR(iwm, "Couldn't create bus entry: %d\n", result);
+			goto error;
+		}
+	}
+
+
+	iwm->dbg.dbg_level = IWM_DL_NONE;
+	iwm->dbg.dbg_level_dentry =
+		debugfs_create_file("level", 0200, iwm->dbg.dbgdir, iwm,
+				    &fops_iwm_dbg_level);
+	result = PTR_ERR(iwm->dbg.dbg_level_dentry);
+	if (IS_ERR(iwm->dbg.dbg_level_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create dbg_level: %d\n", result);
+		goto error;
+	}
+
+
+	iwm->dbg.dbg_modules = IWM_DM_DEFAULT;
+	iwm->dbg.dbg_modules_dentry =
+		debugfs_create_file("modules", 0200, iwm->dbg.dbgdir, iwm,
+				    &fops_iwm_dbg_modules);
+	result = PTR_ERR(iwm->dbg.dbg_modules_dentry);
+	if (IS_ERR(iwm->dbg.dbg_modules_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create dbg_modules: %d\n", result);
+		goto error;
+	}
+
+	for (i = 0; i < __IWM_DM_NR; i++)
+		add_dbg_module(iwm->dbg, iwm_debug_module[i].name,
+			       iwm_debug_module[i].id, IWM_DL_DEFAULT);
+
+	iwm->dbg.txq_dentry = debugfs_create_file("queues", 0200,
+						  iwm->dbg.txdir, iwm,
+						  &iwm_debugfs_txq_fops);
+	result = PTR_ERR(iwm->dbg.txq_dentry);
+	if (IS_ERR(iwm->dbg.txq_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create tx queue: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.tx_credit_dentry = debugfs_create_file("credits", 0200,
+						   iwm->dbg.txdir, iwm,
+						   &iwm_debugfs_tx_credit_fops);
+	result = PTR_ERR(iwm->dbg.tx_credit_dentry);
+	if (IS_ERR(iwm->dbg.tx_credit_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create tx credit: %d\n", result);
+		goto error;
+	}
+
+	iwm->dbg.rx_ticket_dentry = debugfs_create_file("tickets", 0200,
+						  iwm->dbg.rxdir, iwm,
+						  &iwm_debugfs_rx_ticket_fops);
+	result = PTR_ERR(iwm->dbg.rx_ticket_dentry);
+	if (IS_ERR(iwm->dbg.rx_ticket_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create rx ticket: %d\n", result);
+		goto error;
+	}
+
+	return 0;
+
+ error:
+	return result;
+}
+
+void iwm_debugfs_exit(struct iwm_priv *iwm)
+{
+	int i;
+
+	for (i = 0; i < __IWM_DM_NR; i++)
+		debugfs_remove(iwm->dbg.dbg_module_dentries[i]);
+
+	debugfs_remove(iwm->dbg.dbg_modules_dentry);
+	debugfs_remove(iwm->dbg.dbg_level_dentry);
+	debugfs_remove(iwm->dbg.txq_dentry);
+	debugfs_remove(iwm->dbg.tx_credit_dentry);
+	debugfs_remove(iwm->dbg.rx_ticket_dentry);
+	if (iwm->bus_ops->debugfs_exit)
+		iwm->bus_ops->debugfs_exit(iwm);
+
+	debugfs_remove(iwm->dbg.busdir);
+	debugfs_remove(iwm->dbg.dbgdir);
+	debugfs_remove(iwm->dbg.txdir);
+	debugfs_remove(iwm->dbg.rxdir);
+	debugfs_remove(iwm->dbg.devdir);
+	debugfs_remove(iwm->dbg.rootdir);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/eeprom.c b/drivers/net/wireless/iwmc3200wifi/eeprom.c
new file mode 100644
index 00000000000..0f34b84fd2e
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/eeprom.c
@@ -0,0 +1,187 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include "iwm.h"
+#include "umac.h"
+#include "commands.h"
+#include "eeprom.h"
+
+static struct iwm_eeprom_entry eeprom_map[] = {
+	[IWM_EEPROM_SIG] =
+	{"Signature", IWM_EEPROM_SIG_OFF, IWM_EEPROM_SIG_LEN},
+
+	[IWM_EEPROM_VERSION] =
+	{"Version", IWM_EEPROM_VERSION_OFF, IWM_EEPROM_VERSION_LEN},
+
+	[IWM_EEPROM_OEM_HW_VERSION] =
+	{"OEM HW version", IWM_EEPROM_OEM_HW_VERSION_OFF,
+	 IWM_EEPROM_OEM_HW_VERSION_LEN},
+
+	[IWM_EEPROM_MAC_VERSION] =
+	{"MAC version", IWM_EEPROM_MAC_VERSION_OFF, IWM_EEPROM_MAC_VERSION_LEN},
+
+	[IWM_EEPROM_CARD_ID] =
+	{"Card ID", IWM_EEPROM_CARD_ID_OFF, IWM_EEPROM_CARD_ID_LEN},
+
+	[IWM_EEPROM_RADIO_CONF] =
+	{"Radio config", IWM_EEPROM_RADIO_CONF_OFF, IWM_EEPROM_RADIO_CONF_LEN},
+
+	[IWM_EEPROM_SKU_CAP] =
+	{"SKU capabilities", IWM_EEPROM_SKU_CAP_OFF, IWM_EEPROM_SKU_CAP_LEN},
+
+	[IWM_EEPROM_CALIB_RXIQ_OFFSET] =
+	{"RX IQ offset", IWM_EEPROM_CALIB_RXIQ_OFF, IWM_EEPROM_INDIRECT_LEN},
+
+	[IWM_EEPROM_CALIB_RXIQ] =
+	{"Calib RX IQ", 0, IWM_EEPROM_CALIB_RXIQ_LEN},
+};
+
+
+static int iwm_eeprom_read(struct iwm_priv *iwm, u8 eeprom_id)
+{
+	int ret;
+	u32 entry_size, chunk_size, data_offset = 0, addr_offset = 0;
+	u32 addr;
+	struct iwm_udma_wifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_eeprom_proxy eeprom_cmd;
+
+	if (eeprom_id > (IWM_EEPROM_LAST - 1))
+		return -EINVAL;
+
+	entry_size = eeprom_map[eeprom_id].length;
+
+	if (eeprom_id >= IWM_EEPROM_INDIRECT_DATA) {
+		/* indirect data */
+		u32 off_id = eeprom_id - IWM_EEPROM_INDIRECT_DATA +
+			     IWM_EEPROM_INDIRECT_OFFSET;
+
+		eeprom_map[eeprom_id].offset =
+			*(u16 *)(iwm->eeprom + eeprom_map[off_id].offset) << 1;
+	}
+
+	addr = eeprom_map[eeprom_id].offset;
+
+	udma_cmd.eop = 1;
+	udma_cmd.credit_group = 0x4;
+	udma_cmd.ra_tid = UMAC_HDI_ACT_TBL_IDX_HOST_CMD;
+	udma_cmd.lmac_offset = 0;
+
+	umac_cmd.id = UMAC_CMD_OPCODE_EEPROM_PROXY;
+	umac_cmd.resp = 1;
+
+	while (entry_size > 0) {
+		chunk_size = min_t(u32, entry_size, IWM_MAX_EEPROM_DATA_LEN);
+
+		eeprom_cmd.hdr.type =
+			cpu_to_le32(IWM_UMAC_CMD_EEPROM_TYPE_READ);
+		eeprom_cmd.hdr.offset = cpu_to_le32(addr + addr_offset);
+		eeprom_cmd.hdr.len = cpu_to_le32(chunk_size);
+
+		ret = iwm_hal_send_umac_cmd(iwm, &udma_cmd,
+					    &umac_cmd, &eeprom_cmd,
+				     sizeof(struct iwm_umac_cmd_eeprom_proxy));
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't read eeprom\n");
+			return ret;
+		}
+
+		ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_EEPROM_PROXY,
+				       IWM_SRC_UMAC, 2*HZ);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Did not get any eeprom answer\n");
+			return ret;
+		}
+
+		data_offset += chunk_size;
+		addr_offset += chunk_size;
+		entry_size -= chunk_size;
+	}
+
+	return 0;
+}
+
+u8 *iwm_eeprom_access(struct iwm_priv *iwm, u8 eeprom_id)
+{
+	if (!iwm->eeprom)
+		return ERR_PTR(-ENODEV);
+
+	return iwm->eeprom + eeprom_map[eeprom_id].offset;
+}
+
+int iwm_eeprom_init(struct iwm_priv *iwm)
+{
+	int i, ret = 0;
+	char name[32];
+
+	iwm->eeprom = kzalloc(IWM_EEPROM_LEN, GFP_KERNEL);
+	if (!iwm->eeprom)
+		return -ENOMEM;
+
+	for (i = IWM_EEPROM_FIRST; i < IWM_EEPROM_LAST; i++) {
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+		if (iwm->conf.hw_b0 && (i >= IWM_EEPROM_INDIRECT_OFFSET))
+			break;
+#endif
+		ret = iwm_eeprom_read(iwm, i);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't read eeprom entry #%d: %s\n",
+				i, eeprom_map[i].name);
+			break;
+		}
+	}
+
+	IWM_DBG_BOOT(iwm, DBG, "EEPROM dump:\n");
+	for (i = IWM_EEPROM_FIRST; i < IWM_EEPROM_LAST; i++) {
+		memset(name, 0, 32);
+		sprintf(name, "%s: ", eeprom_map[i].name);
+
+		IWM_HEXDUMP(iwm, DBG, BOOT, name,
+			    iwm->eeprom + eeprom_map[i].offset,
+			    eeprom_map[i].length);
+	}
+
+	return ret;
+}
+
+void iwm_eeprom_exit(struct iwm_priv *iwm)
+{
+	kfree(iwm->eeprom);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/eeprom.h b/drivers/net/wireless/iwmc3200wifi/eeprom.h
new file mode 100644
index 00000000000..cdb31a6a1f5
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/eeprom.h
@@ -0,0 +1,114 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_EEPROM_H__
+#define __IWM_EEPROM_H__
+
+enum {
+	IWM_EEPROM_SIG = 0,
+	IWM_EEPROM_FIRST = IWM_EEPROM_SIG,
+	IWM_EEPROM_VERSION,
+	IWM_EEPROM_OEM_HW_VERSION,
+	IWM_EEPROM_MAC_VERSION,
+	IWM_EEPROM_CARD_ID,
+	IWM_EEPROM_RADIO_CONF,
+	IWM_EEPROM_SKU_CAP,
+
+	IWM_EEPROM_INDIRECT_OFFSET,
+	IWM_EEPROM_CALIB_RXIQ_OFFSET = IWM_EEPROM_INDIRECT_OFFSET,
+
+	IWM_EEPROM_INDIRECT_DATA,
+	IWM_EEPROM_CALIB_RXIQ = IWM_EEPROM_INDIRECT_DATA,
+
+	IWM_EEPROM_LAST,
+};
+
+#define IWM_EEPROM_SIG_OFF             0x00
+#define IWM_EEPROM_VERSION_OFF        (0x54 << 1)
+#define IWM_EEPROM_OEM_HW_VERSION_OFF (0x56 << 1)
+#define IWM_EEPROM_MAC_VERSION_OFF    (0x30 << 1)
+#define IWM_EEPROM_CARD_ID_OFF        (0x5d << 1)
+#define IWM_EEPROM_RADIO_CONF_OFF     (0x58 << 1)
+#define IWM_EEPROM_SKU_CAP_OFF        (0x55 << 1)
+#define IWM_EEPROM_CALIB_CONFIG_OFF   (0x7c << 1)
+
+#define IWM_EEPROM_SIG_LEN              4
+#define IWM_EEPROM_VERSION_LEN          2
+#define IWM_EEPROM_OEM_HW_VERSION_LEN   2
+#define IWM_EEPROM_MAC_VERSION_LEN      1
+#define IWM_EEPROM_CARD_ID_LEN          2
+#define IWM_EEPROM_RADIO_CONF_LEN       2
+#define IWM_EEPROM_SKU_CAP_LEN          2
+#define IWM_EEPROM_INDIRECT_LEN		2
+
+#define IWM_MAX_EEPROM_DATA_LEN         240
+#define IWM_EEPROM_LEN                  0x800
+
+#define IWM_EEPROM_MIN_ALLOWED_VERSION          0x0610
+#define IWM_EEPROM_MAX_ALLOWED_VERSION          0x0700
+#define IWM_EEPROM_CURRENT_VERSION              0x0612
+
+#define IWM_EEPROM_SKU_CAP_BAND_24GHZ           (1 << 4)
+#define IWM_EEPROM_SKU_CAP_BAND_52GHZ           (1 << 5)
+#define IWM_EEPROM_SKU_CAP_11N_ENABLE           (1 << 6)
+
+enum {
+	IWM_EEPROM_CALIB_CAL_HDR,
+	IWM_EEPROM_CALIB_TX_POWER,
+	IWM_EEPROM_CALIB_XTAL,
+	IWM_EEPROM_CALIB_TEMPERATURE,
+	IWM_EEPROM_CALIB_RX_BB_FILTER,
+	IWM_EEPROM_CALIB_RX_IQ,
+	IWM_EEPROM_CALIB_MAX,
+};
+
+#define IWM_EEPROM_CALIB_RXIQ_OFF	(IWM_EEPROM_CALIB_CONFIG_OFF + \
+					 (IWM_EEPROM_CALIB_RX_IQ << 1))
+#define IWM_EEPROM_CALIB_RXIQ_LEN	sizeof(struct iwm_lmac_calib_rxiq)
+
+struct iwm_eeprom_entry {
+	char *name;
+	u32 offset;
+	u32 length;
+};
+
+int iwm_eeprom_init(struct iwm_priv *iwm);
+void iwm_eeprom_exit(struct iwm_priv *iwm);
+u8 *iwm_eeprom_access(struct iwm_priv *iwm, u8 eeprom_id);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/fw.c b/drivers/net/wireless/iwmc3200wifi/fw.c
new file mode 100644
index 00000000000..ec1a15a5a0e
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/fw.c
@@ -0,0 +1,388 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/firmware.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "hal.h"
+#include "umac.h"
+#include "debug.h"
+#include "fw.h"
+#include "commands.h"
+
+static const char fw_barker[] = "*WESTOPFORNOONE*";
+
+/*
+ * @op_code: Op code we're looking for.
+ * @index: There can be several instances of the same opcode within
+ *         the firmware. Index specifies which one we're looking for.
+ */
+static int iwm_fw_op_offset(struct iwm_priv *iwm, const struct firmware *fw,
+			    u16 op_code, u32 index)
+{
+	int offset = -EINVAL, fw_offset;
+	u32 op_index = 0;
+	const u8 *fw_ptr;
+	struct iwm_fw_hdr_rec *rec;
+
+	fw_offset = 0;
+	fw_ptr = fw->data;
+
+	/* We first need to look for the firmware barker */
+	if (memcmp(fw_ptr, fw_barker, IWM_HDR_BARKER_LEN)) {
+		IWM_ERR(iwm, "No barker string in this FW\n");
+		return -EINVAL;
+	}
+
+	if (fw->size < IWM_HDR_LEN) {
+		IWM_ERR(iwm, "FW is too small (%zu)\n", fw->size);
+		return -EINVAL;
+	}
+
+	fw_offset += IWM_HDR_BARKER_LEN;
+
+	while (fw_offset < fw->size) {
+		rec = (struct iwm_fw_hdr_rec *)(fw_ptr + fw_offset);
+
+		IWM_DBG_FW(iwm, DBG, "FW: op_code: 0x%x, len: %d @ 0x%x\n",
+			   rec->op_code, rec->len, fw_offset);
+
+		if (rec->op_code == IWM_HDR_REC_OP_INVALID) {
+			IWM_DBG_FW(iwm, DBG, "Reached INVALID op code\n");
+			break;
+		}
+
+		if (rec->op_code == op_code) {
+			if (op_index == index) {
+				fw_offset += sizeof(struct iwm_fw_hdr_rec);
+				offset = fw_offset;
+				goto out;
+			}
+			op_index++;
+		}
+
+		fw_offset += sizeof(struct iwm_fw_hdr_rec) + rec->len;
+	}
+
+ out:
+	return offset;
+}
+
+static int iwm_load_firmware_chunk(struct iwm_priv *iwm,
+				   const struct firmware *fw,
+				   struct iwm_fw_img_desc *img_desc)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	u32 chunk_size;
+	const u8 *chunk_ptr;
+	int ret = 0;
+
+	IWM_DBG_FW(iwm, INFO, "Loading FW chunk: %d bytes @ 0x%x\n",
+		   img_desc->length, img_desc->address);
+
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
+	target_cmd.handle_by_hw = 1;
+	target_cmd.op2 = 0;
+	target_cmd.resp = 0;
+	target_cmd.eop = 1;
+
+	chunk_size = img_desc->length;
+	chunk_ptr = fw->data + img_desc->offset;
+
+	while (chunk_size > 0) {
+		u32 tmp_chunk_size;
+
+		tmp_chunk_size = min_t(u32, chunk_size,
+				       IWM_MAX_NONWIFI_CMD_BUFF_SIZE);
+
+		target_cmd.addr = cpu_to_le32(img_desc->address +
+				    (chunk_ptr - fw->data - img_desc->offset));
+		target_cmd.op1_sz = cpu_to_le32(tmp_chunk_size);
+
+		IWM_DBG_FW(iwm, DBG, "\t%d bytes @ 0x%x\n",
+			   tmp_chunk_size, target_cmd.addr);
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, chunk_ptr);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't load FW chunk\n");
+			break;
+		}
+
+		chunk_size -= tmp_chunk_size;
+		chunk_ptr += tmp_chunk_size;
+	}
+
+	return ret;
+}
+/*
+ * To load a fw image to the target, we basically go through the
+ * fw, looking for OP_MEM_DESC records. Once we found one, we
+ * pass it to iwm_load_firmware_chunk().
+ * The OP_MEM_DESC records contain the actuall memory chunk to be
+ * sent, but also the destination address.
+ */
+static int iwm_load_img(struct iwm_priv *iwm, const char *img_name)
+{
+	const struct firmware *fw;
+	struct iwm_fw_img_desc *img_desc;
+	struct iwm_fw_img_ver *ver;
+	int ret = 0, fw_offset;
+	u32 opcode_idx = 0, build_date;
+	char *build_tag;
+
+	ret = request_firmware(&fw, img_name, iwm_to_dev(iwm));
+	if (ret) {
+		IWM_ERR(iwm, "Request firmware failed");
+		return ret;
+	}
+
+	IWM_DBG_FW(iwm, INFO, "Start to load FW %s\n", img_name);
+
+	while (1) {
+		fw_offset = iwm_fw_op_offset(iwm, fw,
+					     IWM_HDR_REC_OP_MEM_DESC,
+					     opcode_idx);
+		if (fw_offset < 0)
+			break;
+
+		img_desc = (struct iwm_fw_img_desc *)(fw->data + fw_offset);
+		ret = iwm_load_firmware_chunk(iwm, fw, img_desc);
+		if (ret < 0)
+			goto err_release_fw;
+		opcode_idx++;
+	};
+
+	/* Read firmware version */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_SW_VER, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	ver = (struct iwm_fw_img_ver *)(fw->data + fw_offset);
+
+	/* Read build tag */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_TAG, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	build_tag = (char *)(fw->data + fw_offset);
+
+	/* Read build date */
+	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_DATE, 0);
+	if (fw_offset < 0)
+		goto err_release_fw;
+
+	build_date = *(u32 *)(fw->data + fw_offset);
+
+	IWM_INFO(iwm, "%s:\n", img_name);
+	IWM_INFO(iwm, "\tVersion:    %02X.%02X\n", ver->major, ver->minor);
+	IWM_INFO(iwm, "\tBuild tag:  %s\n", build_tag);
+	IWM_INFO(iwm, "\tBuild date: %x-%x-%x\n",
+		 IWM_BUILD_YEAR(build_date), IWM_BUILD_MONTH(build_date),
+		 IWM_BUILD_DAY(build_date));
+
+
+ err_release_fw:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int iwm_load_umac(struct iwm_priv *iwm)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	int ret;
+
+	ret = iwm_load_img(iwm, iwm->bus_ops->umac_name);
+	if (ret < 0)
+		return ret;
+
+	/* We've loaded the UMAC, we can tell the target to jump there */
+	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_JUMP;
+	target_cmd.addr = cpu_to_le32(UMAC_MU_FW_INST_DATA_12_ADDR);
+	target_cmd.op1_sz = 0;
+	target_cmd.op2 = 0;
+	target_cmd.handle_by_hw = 0;
+	target_cmd.resp = 1 ;
+	target_cmd.eop = 1;
+
+	ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
+	if (ret < 0)
+		IWM_ERR(iwm, "Couldn't send JMP command\n");
+
+	return ret;
+}
+
+static int iwm_load_lmac(struct iwm_priv *iwm, const char *img_name)
+{
+	int ret;
+
+	ret = iwm_load_img(iwm, img_name);
+	if (ret < 0)
+		return ret;
+
+	return iwm_send_umac_reset(iwm,
+			cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_CLK_EN), 0);
+}
+
+/*
+ * We currently have to load 3 FWs:
+ * 1) The UMAC (Upper MAC).
+ * 2) The calibration LMAC (Lower MAC).
+ *    We then send the calibration init command, so that the device can
+ *    run a first calibration round.
+ * 3) The operational LMAC, which replaces the calibration one when it's
+ *    done with the first calibration round.
+ *
+ * Once those 3 FWs have been loaded, we send the periodic calibration
+ * command, and then the device is available for regular 802.11 operations.
+ */
+int iwm_load_fw(struct iwm_priv *iwm)
+{
+	int ret;
+
+	/* We first start downloading the UMAC */
+	ret = iwm_load_umac(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "UMAC loading failed\n");
+		return ret;
+	}
+
+	/* Handle UMAC_ALIVE notification */
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_ALIVE, IWM_SRC_UMAC,
+			       WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle UMAC_ALIVE failed: %d\n", ret);
+		return ret;
+	}
+
+	/* UMAC is alive, we can download the calibration LMAC */
+	ret = iwm_load_lmac(iwm, iwm->bus_ops->calib_lmac_name);
+	if (ret) {
+		IWM_ERR(iwm, "Calibration LMAC loading failed\n");
+		return ret;
+	}
+
+	/* Handle UMAC_INIT_COMPLETE notification */
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle INIT_COMPLETE failed for calibration "
+			"LMAC: %d\n", ret);
+		return ret;
+	}
+
+	/* Read EEPROM data */
+	ret = iwm_eeprom_init(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't init eeprom array\n");
+		return ret;
+	}
+
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	if (iwm->conf.hw_b0) {
+		clear_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->conf.init_calib_map);
+		clear_bit(PHY_CALIBRATE_RX_IQ_CMD,
+			  &iwm->conf.periodic_calib_map);
+	}
+#endif
+	/* Read RX IQ calibration result from EEPROM */
+	if (test_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->conf.init_calib_map)) {
+		iwm_store_rxiq_calib_result(iwm);
+		set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
+	}
+
+	iwm_send_prio_table(iwm);
+	iwm_send_init_calib_cfg(iwm, iwm->conf.init_calib_map);
+
+	while (iwm->calib_done_map != iwm->conf.init_calib_map) {
+		ret = iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
+				       IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
+		if (ret) {
+			IWM_ERR(iwm, "Wait for calibration result timeout\n");
+			goto out;
+		}
+		IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
+			   "0x%lx, requested calibrations: 0x%lx\n",
+			   iwm->calib_done_map, iwm->conf.init_calib_map);
+	}
+
+	/* Handle LMAC CALIBRATION_COMPLETE notification */
+	ret = iwm_notif_handle(iwm, CALIBRATION_COMPLETE_NOTIFICATION,
+			       IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Wait for CALIBRATION_COMPLETE timeout\n");
+		goto out;
+	}
+
+	IWM_INFO(iwm, "LMAC calibration done: 0x%lx\n", iwm->calib_done_map);
+
+	iwm_send_umac_reset(iwm, cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_RESET), 1);
+
+	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_RESET, IWM_SRC_UMAC,
+			       WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Wait for UMAC RESET timeout\n");
+		goto out;
+	}
+
+	/* Download the operational LMAC */
+	ret = iwm_load_lmac(iwm, iwm->bus_ops->lmac_name);
+	if (ret) {
+		IWM_ERR(iwm, "LMAC loading failed\n");
+		goto out;
+	}
+
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Handle INIT_COMPLETE failed for LMAC: %d\n", ret);
+		goto out;
+	}
+
+	iwm_send_prio_table(iwm);
+	iwm_send_calib_results(iwm);
+	iwm_send_periodic_calib_cfg(iwm, iwm->conf.periodic_calib_map);
+
+	return 0;
+
+ out:
+	iwm_eeprom_exit(iwm);
+	return ret;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/fw.h b/drivers/net/wireless/iwmc3200wifi/fw.h
new file mode 100644
index 00000000000..c70a3b40dad
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/fw.h
@@ -0,0 +1,100 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_FW_H__
+#define __IWM_FW_H__
+
+/**
+ * struct iwm_fw_hdr_rec - An iwm firmware image is a
+ * concatenation of various records. Each of them is
+ * defined by an ID (aka op code), a length, and the
+ * actual data.
+ * @op_code: The record ID, see IWM_HDR_REC_OP_*
+ *
+ * @len: The record payload length
+ *
+ * @buf: The record payload
+ */
+struct iwm_fw_hdr_rec {
+	u16 op_code;
+	u16 len;
+	u8 buf[0];
+};
+
+/* Header's definitions */
+#define IWM_HDR_LEN                          (512)
+#define IWM_HDR_BARKER_LEN                   (16)
+
+/* Header's opcodes */
+#define IWM_HDR_REC_OP_INVALID             (0x00)
+#define IWM_HDR_REC_OP_BUILD_DATE          (0x01)
+#define IWM_HDR_REC_OP_BUILD_TAG           (0x02)
+#define IWM_HDR_REC_OP_SW_VER              (0x03)
+#define IWM_HDR_REC_OP_HW_SKU              (0x04)
+#define IWM_HDR_REC_OP_BUILD_OPT           (0x05)
+#define IWM_HDR_REC_OP_MEM_DESC            (0x06)
+#define IWM_HDR_REC_USERDEFS               (0x07)
+
+/* Header's records length (in bytes) */
+#define IWM_HDR_REC_LEN_BUILD_DATE           (4)
+#define IWM_HDR_REC_LEN_BUILD_TAG            (64)
+#define IWM_HDR_REC_LEN_SW_VER               (4)
+#define IWM_HDR_REC_LEN_HW_SKU               (4)
+#define IWM_HDR_REC_LEN_BUILD_OPT            (4)
+#define IWM_HDR_REC_LEN_MEM_DESC             (12)
+#define IWM_HDR_REC_LEN_USERDEF              (64)
+
+#define IWM_BUILD_YEAR(date) ((date >> 16) & 0xffff)
+#define IWM_BUILD_MONTH(date) ((date >> 8) & 0xff)
+#define IWM_BUILD_DAY(date) (date & 0xff)
+
+struct iwm_fw_img_desc {
+	u32 offset;
+	u32 address;
+	u32 length;
+};
+
+struct iwm_fw_img_ver {
+	u8 minor;
+	u8 major;
+	u16 reserved;
+};
+
+int iwm_load_fw(struct iwm_priv *iwm);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
new file mode 100644
index 00000000000..ee127fe4f43
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -0,0 +1,464 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+/*
+ * Hardware Abstraction Layer for iwm.
+ *
+ * This file mostly defines an abstraction API for
+ * sending various commands to the target.
+ *
+ * We have 2 types of commands: wifi and non-wifi ones.
+ *
+ * - wifi commands:
+ *   They are used for sending LMAC and UMAC commands,
+ *   and thus are the most commonly used ones.
+ *   There are 2 different wifi command types, the regular
+ *   one and the LMAC one. The former is used to send
+ *   UMAC commands (see UMAC_CMD_OPCODE_* from umac.h)
+ *   while the latter is used for sending commands to the
+ *   LMAC. If you look at LMAC commands you'll se that they
+ *   are actually regular iwlwifi target commands encapsulated
+ *   into a special UMAC command called UMAC passthrough.
+ *   This is due to the fact the the host talks exclusively
+ *   to the UMAC and so there needs to be a special UMAC
+ *   command for talking to the LMAC.
+ *   This is how a wifi command is layed out:
+ *    ------------------------
+ *   | iwm_udma_out_wifi_hdr  |
+ *    ------------------------
+ *   | SW meta_data (32 bits) |
+ *    ------------------------
+ *   | iwm_dev_cmd_hdr        |
+ *    ------------------------
+ *   | payload                |
+ *   | ....                   |
+ *
+ * - non-wifi, or general commands:
+ *   Those commands are handled by the device's bootrom,
+ *   and are typically sent when the UMAC and the LMAC
+ *   are not yet available.
+ *    *   This is how a non-wifi command is layed out:
+ *    ---------------------------
+ *   | iwm_udma_out_nonwifi_hdr  |
+ *    ---------------------------
+ *   | payload                   |
+ *   | ....                      |
+
+ *
+ * All the commands start with a UDMA header, which is
+ * basically a 32 bits field. The 4 LSB there define
+ * an opcode that allows the target to differentiate
+ * between wifi (opcode is 0xf) and non-wifi commands
+ * (opcode is [0..0xe]).
+ *
+ * When a command (wifi or non-wifi) is supposed to receive
+ * an answer, we queue the command buffer. When we do receive
+ * a command response from the UMAC, we go through the list
+ * of pending command, and pass both the command and the answer
+ * to the rx handler. Each command is sent with a unique
+ * sequence id, and the answer is sent with the same one. This
+ * is how we're supposed to match an answer with its command.
+ * See rx.c:iwm_rx_handle_[non]wifi() and iwm_get_pending_[non]wifi()
+ * for the implementation details.
+ */
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+
+#include "iwm.h"
+#include "bus.h"
+#include "hal.h"
+#include "umac.h"
+#include "debug.h"
+
+static void iwm_nonwifi_cmd_init(struct iwm_priv *iwm,
+				 struct iwm_nonwifi_cmd *cmd,
+				 struct iwm_udma_nonwifi_cmd *udma_cmd)
+{
+	INIT_LIST_HEAD(&cmd->pending);
+
+	spin_lock(&iwm->cmd_lock);
+
+	cmd->resp_received = 0;
+
+	cmd->seq_num = iwm->nonwifi_seq_num;
+	udma_cmd->seq_num = cpu_to_le16(cmd->seq_num);
+
+	cmd->seq_num = iwm->nonwifi_seq_num++;
+	iwm->nonwifi_seq_num %= UMAC_NONWIFI_SEQ_NUM_MAX;
+
+	if (udma_cmd->resp)
+		list_add_tail(&cmd->pending, &iwm->nonwifi_pending_cmd);
+
+	spin_unlock(&iwm->cmd_lock);
+
+	cmd->buf.start = cmd->buf.payload;
+	cmd->buf.len = 0;
+
+	memcpy(&cmd->udma_cmd, udma_cmd, sizeof(*udma_cmd));
+}
+
+u16 iwm_alloc_wifi_cmd_seq(struct iwm_priv *iwm)
+{
+	u16 seq_num = iwm->wifi_seq_num;
+
+	iwm->wifi_seq_num++;
+	iwm->wifi_seq_num %= UMAC_WIFI_SEQ_NUM_MAX;
+
+	return seq_num;
+}
+
+static void iwm_wifi_cmd_init(struct iwm_priv *iwm,
+			      struct iwm_wifi_cmd *cmd,
+			      struct iwm_udma_wifi_cmd *udma_cmd,
+			      struct iwm_umac_cmd *umac_cmd,
+			      struct iwm_lmac_cmd *lmac_cmd,
+			      u16 payload_size)
+{
+	INIT_LIST_HEAD(&cmd->pending);
+
+	spin_lock(&iwm->cmd_lock);
+
+	cmd->seq_num = iwm_alloc_wifi_cmd_seq(iwm);
+	umac_cmd->seq_num = cpu_to_le16(cmd->seq_num);
+
+	if (umac_cmd->resp)
+		list_add_tail(&cmd->pending, &iwm->wifi_pending_cmd);
+
+	spin_unlock(&iwm->cmd_lock);
+
+	cmd->buf.start = cmd->buf.payload;
+	cmd->buf.len = 0;
+
+	if (lmac_cmd) {
+		cmd->buf.start -= sizeof(struct iwm_lmac_hdr);
+
+		lmac_cmd->seq_num = cpu_to_le16(cmd->seq_num);
+		lmac_cmd->count = cpu_to_le16(payload_size);
+
+		memcpy(&cmd->lmac_cmd, lmac_cmd, sizeof(*lmac_cmd));
+
+		umac_cmd->count = cpu_to_le16(sizeof(struct iwm_lmac_hdr));
+	} else
+		umac_cmd->count = 0;
+
+	umac_cmd->count = cpu_to_le16(payload_size +
+				      le16_to_cpu(umac_cmd->count));
+	udma_cmd->count = cpu_to_le16(sizeof(struct iwm_umac_fw_cmd_hdr) +
+				      le16_to_cpu(umac_cmd->count));
+
+	memcpy(&cmd->udma_cmd, udma_cmd, sizeof(*udma_cmd));
+	memcpy(&cmd->umac_cmd, umac_cmd, sizeof(*umac_cmd));
+}
+
+void iwm_cmd_flush(struct iwm_priv *iwm)
+{
+	struct iwm_wifi_cmd *wcmd, *wnext;
+	struct iwm_nonwifi_cmd *nwcmd, *nwnext;
+
+	list_for_each_entry_safe(wcmd, wnext, &iwm->wifi_pending_cmd, pending) {
+		list_del(&wcmd->pending);
+		kfree(wcmd);
+	}
+
+	list_for_each_entry_safe(nwcmd, nwnext, &iwm->nonwifi_pending_cmd,
+				 pending) {
+		list_del(&nwcmd->pending);
+		kfree(nwcmd);
+	}
+}
+
+struct iwm_wifi_cmd *iwm_get_pending_wifi_cmd(struct iwm_priv *iwm, u16 seq_num)
+{
+	struct iwm_wifi_cmd *cmd, *next;
+
+	list_for_each_entry_safe(cmd, next, &iwm->wifi_pending_cmd, pending)
+		if (cmd->seq_num == seq_num) {
+			list_del(&cmd->pending);
+			return cmd;
+		}
+
+	return NULL;
+}
+
+struct iwm_nonwifi_cmd *
+iwm_get_pending_nonwifi_cmd(struct iwm_priv *iwm, u8 seq_num, u8 cmd_opcode)
+{
+	struct iwm_nonwifi_cmd *cmd, *next;
+
+	list_for_each_entry_safe(cmd, next, &iwm->nonwifi_pending_cmd, pending)
+		if ((cmd->seq_num == seq_num) &&
+		    (cmd->udma_cmd.opcode == cmd_opcode) &&
+		    (cmd->resp_received)) {
+			list_del(&cmd->pending);
+			return cmd;
+		}
+
+	return NULL;
+}
+
+static void iwm_build_udma_nonwifi_hdr(struct iwm_priv *iwm,
+				       struct iwm_udma_out_nonwifi_hdr *hdr,
+				       struct iwm_udma_nonwifi_cmd *cmd)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_OPCODE, cmd->opcode);
+	SET_VAL32(hdr->cmd, UDMA_HDI_OUT_NW_CMD_RESP, cmd->resp);
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_EOT, 1);
+	SET_VAL32(hdr->cmd, UDMA_HDI_OUT_NW_CMD_HANDLE_BY_HW,
+		  cmd->handle_by_hw);
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_SIGNATURE, UMAC_HDI_OUT_SIGNATURE);
+	SET_VAL32(hdr->cmd, UDMA_HDI_OUT_CMD_NON_WIFI_HW_SEQ_NUM,
+		  le16_to_cpu(cmd->seq_num));
+
+	hdr->addr = cmd->addr;
+	hdr->op1_sz = cmd->op1_sz;
+	hdr->op2 = cmd->op2;
+}
+
+static int iwm_send_udma_nonwifi_cmd(struct iwm_priv *iwm,
+				     struct iwm_nonwifi_cmd *cmd)
+{
+	struct iwm_udma_out_nonwifi_hdr *udma_hdr;
+	struct iwm_nonwifi_cmd_buff *buf;
+	struct iwm_udma_nonwifi_cmd *udma_cmd = &cmd->udma_cmd;
+
+	buf = &cmd->buf;
+
+	buf->start -= sizeof(struct iwm_umac_nonwifi_out_hdr);
+	buf->len += sizeof(struct iwm_umac_nonwifi_out_hdr);
+
+	udma_hdr = (struct iwm_udma_out_nonwifi_hdr *)(buf->start);
+
+	iwm_build_udma_nonwifi_hdr(iwm, udma_hdr, udma_cmd);
+
+	IWM_DBG_CMD(iwm, DBG,
+		    "Send UDMA nonwifi cmd: opcode = 0x%x, resp = 0x%x, "
+		    "hw = 0x%x, seqnum = %d, addr = 0x%x, op1_sz = 0x%x, "
+		    "op2 = 0x%x\n", udma_cmd->opcode, udma_cmd->resp,
+		    udma_cmd->handle_by_hw, cmd->seq_num, udma_cmd->addr,
+		    udma_cmd->op1_sz, udma_cmd->op2);
+
+	return iwm_bus_send_chunk(iwm, buf->start, buf->len);
+}
+
+void iwm_udma_wifi_hdr_set_eop(struct iwm_priv *iwm, u8 *buf, u8 eop)
+{
+	struct iwm_udma_out_wifi_hdr *hdr = (struct iwm_udma_out_wifi_hdr *)buf;
+
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_EOT, eop);
+}
+
+void iwm_build_udma_wifi_hdr(struct iwm_priv *iwm,
+			     struct iwm_udma_out_wifi_hdr *hdr,
+			     struct iwm_udma_wifi_cmd *cmd)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_OPCODE, UMAC_HDI_OUT_OPCODE_WIFI);
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_EOT, cmd->eop);
+	SET_VAL32(hdr->cmd, UMAC_HDI_OUT_CMD_SIGNATURE, UMAC_HDI_OUT_SIGNATURE);
+
+	SET_VAL32(hdr->meta_data, UMAC_HDI_OUT_BYTE_COUNT,
+		  le16_to_cpu(cmd->count));
+	SET_VAL32(hdr->meta_data, UMAC_HDI_OUT_CREDIT_GRP, cmd->credit_group);
+	SET_VAL32(hdr->meta_data, UMAC_HDI_OUT_RATID, cmd->ra_tid);
+	SET_VAL32(hdr->meta_data, UMAC_HDI_OUT_LMAC_OFFSET, cmd->lmac_offset);
+}
+
+void iwm_build_umac_hdr(struct iwm_priv *iwm,
+			struct iwm_umac_fw_cmd_hdr *hdr,
+			struct iwm_umac_cmd *cmd)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	SET_VAL32(hdr->meta_data, UMAC_FW_CMD_BYTE_COUNT,
+		  le16_to_cpu(cmd->count));
+	SET_VAL32(hdr->meta_data, UMAC_FW_CMD_TX_STA_COLOR, cmd->color);
+	SET_VAL8(hdr->cmd.flags, UMAC_DEV_CMD_FLAGS_RESP_REQ, cmd->resp);
+
+	hdr->cmd.cmd = cmd->id;
+	hdr->cmd.seq_num = cmd->seq_num;
+}
+
+static int iwm_send_udma_wifi_cmd(struct iwm_priv *iwm,
+				  struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_wifi_out_hdr *umac_hdr;
+	struct iwm_wifi_cmd_buff *buf;
+	struct iwm_udma_wifi_cmd *udma_cmd = &cmd->udma_cmd;
+	struct iwm_umac_cmd *umac_cmd = &cmd->umac_cmd;
+	int ret;
+
+	buf = &cmd->buf;
+
+	buf->start -= sizeof(struct iwm_umac_wifi_out_hdr);
+	buf->len += sizeof(struct iwm_umac_wifi_out_hdr);
+
+	umac_hdr = (struct iwm_umac_wifi_out_hdr *)(buf->start);
+
+	iwm_build_udma_wifi_hdr(iwm, &umac_hdr->hw_hdr, udma_cmd);
+	iwm_build_umac_hdr(iwm, &umac_hdr->sw_hdr, umac_cmd);
+
+	IWM_DBG_CMD(iwm, DBG,
+		    "Send UDMA wifi cmd: opcode = 0x%x, UMAC opcode = 0x%x, "
+		    "eop = 0x%x, count = 0x%x, credit_group = 0x%x, "
+		    "ra_tid = 0x%x, lmac_offset = 0x%x, seqnum = %d\n",
+		    UMAC_HDI_OUT_OPCODE_WIFI, umac_cmd->id,
+		    udma_cmd->eop, udma_cmd->count, udma_cmd->credit_group,
+		    udma_cmd->ra_tid, udma_cmd->lmac_offset, cmd->seq_num);
+
+	if (umac_cmd->id == UMAC_CMD_OPCODE_WIFI_PASS_THROUGH)
+		IWM_DBG_CMD(iwm, DBG, "\tLMAC opcode: 0x%x\n",
+			    cmd->lmac_cmd.id);
+
+	ret = iwm_tx_credit_alloc(iwm, udma_cmd->credit_group, buf->len);
+
+	/* We keep sending UMAC reset regardless of the command credits.
+	 * The UMAC is supposed to be reset anyway and the Tx credits are
+	 * reinitialized afterwards. If we are lucky, the reset could
+	 * still be done even though we have run out of credits for the
+	 * command pool at this moment.*/
+	if (ret && (umac_cmd->id != UMAC_CMD_OPCODE_RESET)) {
+		IWM_DBG_TX(iwm, DBG, "Failed to alloc tx credit for cmd %d\n",
+			   umac_cmd->id);
+		return ret;
+	}
+
+	return iwm_bus_send_chunk(iwm, buf->start, buf->len);
+}
+
+/* target_cmd a.k.a udma_nonwifi_cmd can be sent when UMAC is not available */
+int iwm_hal_send_target_cmd(struct iwm_priv *iwm,
+			    struct iwm_udma_nonwifi_cmd *udma_cmd,
+			    const void *payload)
+{
+	struct iwm_nonwifi_cmd *cmd;
+	int ret;
+
+	cmd = kzalloc(sizeof(struct iwm_nonwifi_cmd), GFP_KERNEL);
+	if (!cmd) {
+		IWM_ERR(iwm, "Couldn't alloc memory for hal cmd\n");
+		return -ENOMEM;
+	}
+
+	iwm_nonwifi_cmd_init(iwm, cmd, udma_cmd);
+
+	if (cmd->udma_cmd.opcode == UMAC_HDI_OUT_OPCODE_WRITE ||
+	    cmd->udma_cmd.opcode == UMAC_HDI_OUT_OPCODE_WRITE_PERSISTENT) {
+		cmd->buf.len = le32_to_cpu(cmd->udma_cmd.op1_sz);
+		memcpy(&cmd->buf.payload, payload, cmd->buf.len);
+	}
+
+	ret = iwm_send_udma_nonwifi_cmd(iwm, cmd);
+
+	if (!udma_cmd->resp)
+		kfree(cmd);
+
+	if (ret < 0)
+		return ret;
+
+	return cmd->seq_num;
+}
+
+static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr,
+			       struct iwm_lmac_cmd *cmd)
+{
+	memset(hdr, 0, sizeof(*hdr));
+
+	hdr->id = cmd->id;
+	hdr->flags = 0; /* Is this ever used? */
+	hdr->seq_num = cmd->seq_num;
+}
+
+/*
+ * iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC.
+ * Sending command to the LMAC is equivalent to sending a
+ * regular UMAC command with the LMAC passtrough or the LMAC
+ * wrapper UMAC command IDs.
+ */
+int iwm_hal_send_host_cmd(struct iwm_priv *iwm,
+			  struct iwm_udma_wifi_cmd *udma_cmd,
+			  struct iwm_umac_cmd *umac_cmd,
+			  struct iwm_lmac_cmd *lmac_cmd,
+			  const void *payload, u16 payload_size)
+{
+	struct iwm_wifi_cmd *cmd;
+	struct iwm_lmac_hdr *hdr;
+	int lmac_hdr_len = 0;
+	int ret;
+
+	cmd = kzalloc(sizeof(struct iwm_wifi_cmd), GFP_KERNEL);
+	if (!cmd) {
+		IWM_ERR(iwm, "Couldn't alloc memory for wifi hal cmd\n");
+		return -ENOMEM;
+	}
+
+	iwm_wifi_cmd_init(iwm, cmd, udma_cmd, umac_cmd, lmac_cmd, payload_size);
+
+	if (lmac_cmd) {
+		hdr = (struct iwm_lmac_hdr *)(cmd->buf.start);
+
+		iwm_build_lmac_hdr(iwm, hdr, &cmd->lmac_cmd);
+		lmac_hdr_len = sizeof(struct iwm_lmac_hdr);
+	}
+
+	memcpy(cmd->buf.payload, payload, payload_size);
+	cmd->buf.len = le16_to_cpu(umac_cmd->count);
+
+	ret = iwm_send_udma_wifi_cmd(iwm, cmd);
+
+	/* We free the cmd if we're not expecting any response */
+	if (!umac_cmd->resp)
+		kfree(cmd);
+	return ret;
+}
+
+/*
+ * iwm_hal_send_umac_cmd(): This is a special case for
+ * iwm_hal_send_host_cmd() to send direct UMAC cmd (without
+ * LMAC involved).
+ */
+int iwm_hal_send_umac_cmd(struct iwm_priv *iwm,
+			  struct iwm_udma_wifi_cmd *udma_cmd,
+			  struct iwm_umac_cmd *umac_cmd,
+			  const void *payload, u16 payload_size)
+{
+	return iwm_hal_send_host_cmd(iwm, udma_cmd, umac_cmd, NULL,
+				     payload, payload_size);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.h b/drivers/net/wireless/iwmc3200wifi/hal.h
new file mode 100644
index 00000000000..0adfdc85765
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/hal.h
@@ -0,0 +1,236 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef _IWM_HAL_H_
+#define _IWM_HAL_H_
+
+#include "umac.h"
+
+#define GET_VAL8(s, name)	((s >> name##_POS) & name##_SEED)
+#define GET_VAL16(s, name)	((le16_to_cpu(s) >> name##_POS) & name##_SEED)
+#define GET_VAL32(s, name)	((le32_to_cpu(s) >> name##_POS) & name##_SEED)
+
+#define SET_VAL8(s, name, val)						  \
+do {									  \
+	s = (s & ~(name##_SEED << name##_POS)) |			  \
+	    ((val & name##_SEED) << name##_POS);			  \
+} while (0)
+
+#define SET_VAL16(s, name, val)						  \
+do {									  \
+	s = cpu_to_le16((le16_to_cpu(s) & ~(name##_SEED << name##_POS)) | \
+			((val & name##_SEED) << name##_POS));		  \
+} while (0)
+
+#define SET_VAL32(s, name, val)						  \
+do {									  \
+	s = cpu_to_le32((le32_to_cpu(s) & ~(name##_SEED << name##_POS)) | \
+			((val & name##_SEED) << name##_POS));		  \
+} while (0)
+
+
+#define UDMA_UMAC_INIT	{	.eop = 1,				  \
+				.credit_group = 0x4,			  \
+				.ra_tid = UMAC_HDI_ACT_TBL_IDX_HOST_CMD,  \
+				.lmac_offset = 0 }
+#define UDMA_LMAC_INIT	{	.eop = 1,				  \
+				.credit_group = 0x4,			  \
+				.ra_tid = UMAC_HDI_ACT_TBL_IDX_HOST_CMD,  \
+				.lmac_offset = 4 }
+
+
+/* UDMA IN OP CODE -- cmd bits [3:0] */
+#define UDMA_IN_OPCODE_MASK			0xF
+
+#define UDMA_IN_OPCODE_GENERAL_RESP		0x0
+#define UDMA_IN_OPCODE_READ_RESP		0x1
+#define UDMA_IN_OPCODE_WRITE_RESP		0x2
+#define UDMA_IN_OPCODE_PERS_WRITE_RESP		0x5
+#define UDMA_IN_OPCODE_PERS_READ_RESP		0x6
+#define UDMA_IN_OPCODE_RD_MDFY_WR_RESP		0x7
+#define UDMA_IN_OPCODE_EP_MNGMT_MSG		0x8
+#define UDMA_IN_OPCODE_CRDT_CHNG_MSG		0x9
+#define UDMA_IN_OPCODE_CNTRL_DATABASE_MSG	0xA
+#define UDMA_IN_OPCODE_SW_MSG			0xB
+#define UDMA_IN_OPCODE_WIFI			0xF
+#define UDMA_IN_OPCODE_WIFI_LMAC		0x1F
+#define UDMA_IN_OPCODE_WIFI_UMAC		0x2F
+
+/* HW API: udma_hdi_nonwifi API (OUT and IN) */
+
+/* iwm_udma_nonwifi_cmd request response -- bits [9:9] */
+#define UDMA_HDI_OUT_NW_CMD_RESP_POS		9
+#define UDMA_HDI_OUT_NW_CMD_RESP_SEED		0x1
+
+/* iwm_udma_nonwifi_cmd handle by HW -- bits [11:11] */
+#define UDMA_HDI_OUT_NW_CMD_HANDLE_BY_HW_POS	11
+#define UDMA_HDI_OUT_NW_CMD_HANDLE_BY_HW_SEED	0x1
+
+/* iwm_udma_nonwifi_cmd sequence-number -- bits [12:15] */
+#define UDMA_HDI_OUT_NW_CMD_SEQ_NUM_POS		12
+#define UDMA_HDI_OUT_NW_CMD_SEQ_NUM_SEED	0xF
+
+/* UDMA IN Non-WIFI HW sequence number -- bits [12:15] */
+#define UDMA_IN_NW_HW_SEQ_NUM_POS		12
+#define UDMA_IN_NW_HW_SEQ_NUM_SEED		0xF
+
+/* UDMA IN Non-WIFI HW signature -- bits [16:31] */
+#define UDMA_IN_NW_HW_SIG_POS			16
+#define UDMA_IN_NW_HW_SIG_SEED			0xFFFF
+
+/* fixed signature */
+#define UDMA_IN_NW_HW_SIG			0xCBBC
+
+/* UDMA IN Non-WIFI HW block length -- bits [32:35] */
+#define UDMA_IN_NW_HW_LENGTH_SEED		0xF
+#define UDMA_IN_NW_HW_LENGTH_POS		32
+
+/* End of HW API: udma_hdi_nonwifi API (OUT and IN) */
+
+#define IWM_SDIO_FW_MAX_CHUNK_SIZE	2032
+#define IWM_MAX_WIFI_HEADERS_SIZE	32
+#define IWM_MAX_NONWIFI_HEADERS_SIZE	16
+#define IWM_MAX_NONWIFI_CMD_BUFF_SIZE	(IWM_SDIO_FW_MAX_CHUNK_SIZE - \
+					 IWM_MAX_NONWIFI_HEADERS_SIZE)
+#define IWM_MAX_WIFI_CMD_BUFF_SIZE	(IWM_SDIO_FW_MAX_CHUNK_SIZE - \
+					 IWM_MAX_WIFI_HEADERS_SIZE)
+
+#define IWM_HAL_CONCATENATE_BUF_SIZE	8192
+
+struct iwm_wifi_cmd_buff {
+	u16 len;
+	u8 *start;
+	u8 hdr[IWM_MAX_WIFI_HEADERS_SIZE];
+	u8 payload[IWM_MAX_WIFI_CMD_BUFF_SIZE];
+};
+
+struct iwm_nonwifi_cmd_buff {
+	u16 len;
+	u8 *start;
+	u8 hdr[IWM_MAX_NONWIFI_HEADERS_SIZE];
+	u8 payload[IWM_MAX_NONWIFI_CMD_BUFF_SIZE];
+};
+
+struct iwm_udma_nonwifi_cmd {
+	u8 opcode;
+	u8 eop;
+	u8 resp;
+	u8 handle_by_hw;
+	__le32 addr;
+	__le32 op1_sz;
+	__le32 op2;
+	__le16 seq_num;
+};
+
+struct iwm_udma_wifi_cmd {
+	__le16 count;
+	u8 eop;
+	u8 credit_group;
+	u8 ra_tid;
+	u8 lmac_offset;
+};
+
+struct iwm_umac_cmd {
+	u8 id;
+	__le16 count;
+	u8 resp;
+	__le16 seq_num;
+	u8 color;
+};
+
+struct iwm_lmac_cmd {
+	u8 id;
+	__le16 count;
+	u8 resp;
+	__le16 seq_num;
+};
+
+struct iwm_nonwifi_cmd {
+	u16 seq_num;
+	bool resp_received;
+	struct list_head pending;
+	struct iwm_udma_nonwifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_lmac_cmd lmac_cmd;
+	struct iwm_nonwifi_cmd_buff buf;
+	u32 flags;
+};
+
+struct iwm_wifi_cmd {
+	u16 seq_num;
+	struct list_head pending;
+	struct iwm_udma_wifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_lmac_cmd lmac_cmd;
+	struct iwm_wifi_cmd_buff buf;
+	u32 flags;
+};
+
+void iwm_cmd_flush(struct iwm_priv *iwm);
+
+struct iwm_wifi_cmd *iwm_get_pending_wifi_cmd(struct iwm_priv *iwm,
+					      u16 seq_num);
+struct iwm_nonwifi_cmd *iwm_get_pending_nonwifi_cmd(struct iwm_priv *iwm,
+						    u8 seq_num, u8 cmd_opcode);
+
+
+int iwm_hal_send_target_cmd(struct iwm_priv *iwm,
+			    struct iwm_udma_nonwifi_cmd *ucmd,
+			    const void *payload);
+
+int iwm_hal_send_host_cmd(struct iwm_priv *iwm,
+			  struct iwm_udma_wifi_cmd *udma_cmd,
+			  struct iwm_umac_cmd *umac_cmd,
+			  struct iwm_lmac_cmd *lmac_cmd,
+			  const void *payload, u16 payload_size);
+
+int iwm_hal_send_umac_cmd(struct iwm_priv *iwm,
+			  struct iwm_udma_wifi_cmd *udma_cmd,
+			  struct iwm_umac_cmd *umac_cmd,
+			  const void *payload, u16 payload_size);
+
+u16 iwm_alloc_wifi_cmd_seq(struct iwm_priv *iwm);
+
+void iwm_udma_wifi_hdr_set_eop(struct iwm_priv *iwm, u8 *buf, u8 eop);
+void iwm_build_udma_wifi_hdr(struct iwm_priv *iwm,
+			     struct iwm_udma_out_wifi_hdr *hdr,
+			     struct iwm_udma_wifi_cmd *cmd);
+void iwm_build_umac_hdr(struct iwm_priv *iwm,
+			struct iwm_umac_fw_cmd_hdr *hdr,
+			struct iwm_umac_cmd *cmd);
+#endif /* _IWM_HAL_H_ */
diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
new file mode 100644
index 00000000000..635c16ee618
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -0,0 +1,346 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_H__
+#define __IWM_H__
+
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/cfg80211.h>
+
+#include "debug.h"
+#include "hal.h"
+#include "umac.h"
+#include "lmac.h"
+#include "eeprom.h"
+
+#define IWM_COPYRIGHT "Copyright(c) 2009 Intel Corporation"
+#define IWM_AUTHOR "<ilw@linux.intel.com>"
+
+#define CONFIG_IWM_B0_HW_SUPPORT	1
+
+#define IWM_SRC_LMAC	UMAC_HDI_IN_SOURCE_FHRX
+#define IWM_SRC_UDMA	UMAC_HDI_IN_SOURCE_UDMA
+#define IWM_SRC_UMAC	UMAC_HDI_IN_SOURCE_FW
+#define IWM_SRC_NUM	3
+
+#define IWM_POWER_INDEX_MIN	0
+#define IWM_POWER_INDEX_MAX	5
+#define IWM_POWER_INDEX_DEFAULT	3
+
+struct iwm_conf {
+	u32 sdio_ior_timeout;
+	unsigned long init_calib_map;
+	unsigned long periodic_calib_map;
+	bool reset_on_fatal_err;
+	bool auto_connect;
+	bool wimax_not_present;
+	bool enable_qos;
+	u32 mode;
+
+	u32 power_index;
+	u32 frag_threshold;
+	u32 rts_threshold;
+	bool cts_to_self;
+
+	u32 assoc_timeout;
+	u32 roam_timeout;
+	u32 wireless_mode;
+	u32 coexist_mode;
+
+	u8 ibss_band;
+	u8 ibss_channel;
+
+	u8 mac_addr[ETH_ALEN];
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	bool hw_b0;
+#endif
+};
+
+enum {
+	COEX_MODE_SA = 1,
+	COEX_MODE_XOR,
+	COEX_MODE_CM,
+	COEX_MODE_MAX,
+};
+
+struct iwm_if_ops;
+struct iwm_wifi_cmd;
+
+struct pool_entry {
+	int id;		/* group id */
+	int sid;	/* super group id */
+	int min_pages;	/* min capacity in pages */
+	int max_pages;	/* max capacity in pages */
+	int alloc_pages;	/* allocated # of pages. incresed by driver */
+	int total_freed_pages;	/* total freed # of pages. incresed by UMAC */
+};
+
+struct spool_entry {
+	int id;
+	int max_pages;
+	int alloc_pages;
+};
+
+struct iwm_tx_credit {
+	spinlock_t lock;
+	int pool_nr;
+	unsigned long full_pools_map; /* bitmap for # of filled tx pools */
+	struct pool_entry pools[IWM_MACS_OUT_GROUPS];
+	struct spool_entry spools[IWM_MACS_OUT_SGROUPS];
+};
+
+struct iwm_notif {
+	struct list_head pending;
+	u32 cmd_id;
+	void *cmd;
+	u8 src;
+	void *buf;
+	unsigned long buf_size;
+};
+
+struct iwm_sta_info {
+	u8 addr[ETH_ALEN];
+	bool valid;
+	bool qos;
+	u8 color;
+};
+
+struct iwm_tx_info {
+	u8 sta;
+	u8 color;
+	u8 tid;
+};
+
+struct iwm_rx_info {
+	unsigned long rx_size;
+	unsigned long rx_buf_size;
+};
+
+#define IWM_NUM_KEYS 4
+
+struct iwm_umac_key_hdr {
+	u8 mac[ETH_ALEN];
+	u8 key_idx;
+	u8 multicast; /* BCast encrypt & BCast decrypt of frames FROM mac */
+} __attribute__ ((packed));
+
+struct iwm_key {
+	struct iwm_umac_key_hdr hdr;
+	u8 in_use;
+	u8 alg;
+	u32 flags;
+	u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE];
+	u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE];
+	u8 key_len;
+	u8 key[32];
+};
+
+#define IWM_RX_ID_HASH  0xff
+#define IWM_RX_ID_GET_HASH(id) ((id) % IWM_RX_ID_HASH)
+
+#define IWM_STA_TABLE_NUM	16
+#define IWM_TX_LIST_SIZE	64
+#define IWM_RX_LIST_SIZE        256
+
+#define IWM_SCAN_ID_MAX 0xff
+
+#define IWM_STATUS_READY		0
+#define IWM_STATUS_SCANNING		1
+#define IWM_STATUS_SCAN_ABORTING	2
+#define IWM_STATUS_ASSOCIATING		3
+#define IWM_STATUS_ASSOCIATED		4
+
+#define IWM_RADIO_RFKILL_OFF		0
+#define IWM_RADIO_RFKILL_HW		1
+#define IWM_RADIO_RFKILL_SW		2
+
+struct iwm_tx_queue {
+	int id;
+	struct sk_buff_head queue;
+	struct workqueue_struct *wq;
+	struct work_struct worker;
+	u8 concat_buf[IWM_HAL_CONCATENATE_BUF_SIZE];
+	int concat_count;
+	u8 *concat_ptr;
+};
+
+/* Queues 0 ~ 3 for AC data, 5 for iPAN */
+#define IWM_TX_QUEUES		5
+#define IWM_TX_DATA_QUEUES	4
+#define IWM_TX_CMD_QUEUE	4
+
+struct iwm_bss_info {
+	struct list_head node;
+	struct cfg80211_bss *cfg_bss;
+	struct iwm_umac_notif_bss_info *bss;
+};
+
+typedef int (*iwm_handler)(struct iwm_priv *priv, u8 *buf,
+			   unsigned long buf_size, struct iwm_wifi_cmd *cmd);
+
+#define IWM_WATCHDOG_PERIOD	(6 * HZ)
+
+struct iwm_priv {
+	struct wireless_dev *wdev;
+	struct iwm_if_ops *bus_ops;
+
+	struct iwm_conf conf;
+
+	unsigned long status;
+	unsigned long radio;
+
+	struct list_head pending_notif;
+	wait_queue_head_t notif_queue;
+
+	wait_queue_head_t nonwifi_queue;
+
+	unsigned long calib_done_map;
+	struct {
+		u8 *buf;
+		u32 size;
+	} calib_res[CALIBRATION_CMD_NUM];
+
+	struct iwm_umac_profile *umac_profile;
+	bool umac_profile_active;
+
+	u8 bssid[ETH_ALEN];
+	u8 channel;
+	u16 rate;
+
+	struct iwm_sta_info sta_table[IWM_STA_TABLE_NUM];
+	struct list_head bss_list;
+
+	void (*nonwifi_rx_handlers[UMAC_HDI_IN_OPCODE_NONWIFI_MAX])
+	(struct iwm_priv *priv, u8 *buf, unsigned long buf_size);
+
+	const iwm_handler *umac_handlers;
+	const iwm_handler *lmac_handlers;
+	DECLARE_BITMAP(lmac_handler_map, LMAC_COMMAND_ID_NUM);
+	DECLARE_BITMAP(umac_handler_map, LMAC_COMMAND_ID_NUM);
+	DECLARE_BITMAP(udma_handler_map, LMAC_COMMAND_ID_NUM);
+
+	struct list_head wifi_pending_cmd;
+	struct list_head nonwifi_pending_cmd;
+	u16 wifi_seq_num;
+	u8 nonwifi_seq_num;
+	spinlock_t cmd_lock;
+
+	u32 core_enabled;
+
+	u8 scan_id;
+	struct cfg80211_scan_request *scan_request;
+
+	struct sk_buff_head rx_list;
+	struct list_head rx_tickets;
+	struct list_head rx_packets[IWM_RX_ID_HASH];
+	struct workqueue_struct *rx_wq;
+	struct work_struct rx_worker;
+
+	struct iwm_tx_credit tx_credit;
+	struct iwm_tx_queue txq[IWM_TX_QUEUES];
+
+	struct iwm_key keys[IWM_NUM_KEYS];
+	struct iwm_key *default_key;
+
+	wait_queue_head_t mlme_queue;
+
+	struct iw_statistics wstats;
+	struct delayed_work stats_request;
+
+	struct iwm_debugfs dbg;
+
+	u8 *eeprom;
+	struct timer_list watchdog;
+	struct work_struct reset_worker;
+	struct rfkill *rfkill;
+
+	char private[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+static inline void *iwm_private(struct iwm_priv *iwm)
+{
+	BUG_ON(!iwm);
+	return &iwm->private;
+}
+
+#define hw_to_iwm(h) (h->iwm)
+#define iwm_to_dev(i) (wiphy_dev(i->wdev->wiphy))
+#define iwm_to_wiphy(i) (i->wdev->wiphy)
+#define wiphy_to_iwm(w) (struct iwm_priv *)(wiphy_priv(w))
+#define iwm_to_wdev(i) (i->wdev)
+#define wdev_to_iwm(w) (struct iwm_priv *)(wdev_priv(w))
+#define iwm_to_ndev(i) (i->wdev->netdev)
+#define ndev_to_iwm(n) (wdev_to_iwm(n->ieee80211_ptr))
+#define skb_to_rx_info(s) ((struct iwm_rx_info *)(s->cb))
+#define skb_to_tx_info(s) ((struct iwm_tx_info *)s->cb)
+
+extern const struct iw_handler_def iwm_iw_handler_def;
+
+void *iwm_if_alloc(int sizeof_bus, struct device *dev,
+		   struct iwm_if_ops *if_ops);
+void iwm_if_free(struct iwm_priv *iwm);
+int iwm_mode_to_nl80211_iftype(int mode);
+int iwm_priv_init(struct iwm_priv *iwm);
+void iwm_reset(struct iwm_priv *iwm);
+void iwm_tx_credit_init_pools(struct iwm_priv *iwm,
+			      struct iwm_umac_notif_alive *alive);
+int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb);
+int iwm_notif_send(struct iwm_priv *iwm, struct iwm_wifi_cmd *cmd,
+		   u8 cmd_id, u8 source, u8 *buf, unsigned long buf_size);
+int iwm_notif_handle(struct iwm_priv *iwm, u32 cmd, u8 source, long timeout);
+void iwm_init_default_profile(struct iwm_priv *iwm,
+			      struct iwm_umac_profile *profile);
+void iwm_link_on(struct iwm_priv *iwm);
+void iwm_link_off(struct iwm_priv *iwm);
+int iwm_up(struct iwm_priv *iwm);
+int iwm_down(struct iwm_priv *iwm);
+
+/* TX API */
+void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages);
+void iwm_tx_worker(struct work_struct *work);
+int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+
+/* RX API */
+void iwm_rx_setup_handlers(struct iwm_priv *iwm);
+int iwm_rx_handle(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size);
+int iwm_rx_handle_resp(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size,
+		       struct iwm_wifi_cmd *cmd);
+void iwm_rx_free(struct iwm_priv *iwm);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
new file mode 100644
index 00000000000..db2e5eea189
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -0,0 +1,457 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_LMAC_H__
+#define __IWM_LMAC_H__
+
+struct iwm_lmac_hdr {
+	u8 id;
+	u8 flags;
+	__le16 seq_num;
+} __attribute__ ((packed));
+
+/* LMAC commands */
+#define CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_AFTER_MSK  0x1
+
+struct iwm_lmac_cal_cfg_elt {
+	__le32 enable; /* 1 means LMAC needs to do something */
+	__le32 start;  /* 1 to start calibration, 0 to stop */
+	__le32 send_res; /* 1 for sending back results */
+	__le32 apply_res; /* 1 for applying calibration results to HW */
+	__le32 reserved;
+} __attribute__ ((packed));
+
+struct iwm_lmac_cal_cfg_status {
+	struct iwm_lmac_cal_cfg_elt init;
+	struct iwm_lmac_cal_cfg_elt periodic;
+	__le32 flags; /* CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_AFTER_MSK */
+} __attribute__ ((packed));
+
+struct iwm_lmac_cal_cfg_cmd {
+	struct iwm_lmac_cal_cfg_status ucode_cfg;
+	struct iwm_lmac_cal_cfg_status driver_cfg;
+	__le32 reserved;
+} __attribute__ ((packed));
+
+struct iwm_lmac_cal_cfg_resp {
+	__le32 status;
+} __attribute__ ((packed));
+
+#define IWM_CARD_STATE_SW_HW_ENABLED	0x00
+#define IWM_CARD_STATE_HW_DISABLED	0x01
+#define IWM_CARD_STATE_SW_DISABLED	0x02
+#define IWM_CARD_STATE_CTKILL_DISABLED	0x04
+#define IWM_CARD_STATE_IS_RXON		0x10
+
+struct iwm_lmac_card_state {
+	__le32 flags;
+} __attribute__ ((packed));
+
+/**
+ * COEX_PRIORITY_TABLE_CMD
+ *
+ * Priority entry for each state
+ * Will keep two tables, for STA and WIPAN
+ */
+enum {
+	/* UN-ASSOCIATION PART */
+	COEX_UNASSOC_IDLE = 0,
+	COEX_UNASSOC_MANUAL_SCAN,
+	COEX_UNASSOC_AUTO_SCAN,
+
+	/* CALIBRATION */
+	COEX_CALIBRATION,
+	COEX_PERIODIC_CALIBRATION,
+
+	/* CONNECTION */
+	COEX_CONNECTION_ESTAB,
+
+	/* ASSOCIATION PART */
+	COEX_ASSOCIATED_IDLE,
+	COEX_ASSOC_MANUAL_SCAN,
+	COEX_ASSOC_AUTO_SCAN,
+	COEX_ASSOC_ACTIVE_LEVEL,
+
+	/* RF ON/OFF */
+	COEX_RF_ON,
+	COEX_RF_OFF,
+	COEX_STAND_ALONE_DEBUG,
+
+	/* IPNN */
+	COEX_IPAN_ASSOC_LEVEL,
+
+	/* RESERVED */
+	COEX_RSRVD1,
+	COEX_RSRVD2,
+
+	COEX_EVENTS_NUM
+};
+
+#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK	0x1
+#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK	0x2
+#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK	0x4
+
+struct coex_event {
+	u8 req_prio;
+	u8 win_med_prio;
+	u8 reserved;
+	u8 flags;
+} __attribute__ ((packed));
+
+#define COEX_FLAGS_STA_TABLE_VALID_MSK		0x1
+#define COEX_FLAGS_UNASSOC_WAKEUP_UMASK_MSK	0x4
+#define COEX_FLAGS_ASSOC_WAKEUP_UMASK_MSK	0x8
+#define COEX_FLAGS_COEX_ENABLE_MSK		0x80
+
+struct iwm_coex_prio_table_cmd {
+	u8 flags;
+	u8 reserved[3];
+	struct coex_event sta_prio[COEX_EVENTS_NUM];
+} __attribute__ ((packed));
+
+/* Coexistence definitions
+ *
+ * Constants to fill in the Priorities' Tables
+ * RP - Requested Priority
+ * WP - Win Medium Priority: priority assigned when the contention has been won
+ * FLAGS - Combination of COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK and
+ * 	   COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK
+ */
+
+#define COEX_UNASSOC_IDLE_FLAGS		0
+#define COEX_UNASSOC_MANUAL_SCAN_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_UNASSOC_AUTO_SCAN_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_CALIBRATION_FLAGS		(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_PERIODIC_CALIBRATION_FLAGS	0
+/* COEX_CONNECTION_ESTAB: we need DELAY_MEDIUM_FREE_NTFY to let WiMAX
+ * disconnect from network. */
+#define COEX_CONNECTION_ESTAB_FLAGS (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+				     COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK | \
+				     COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK)
+#define COEX_ASSOCIATED_IDLE_FLAGS	0
+#define COEX_ASSOC_MANUAL_SCAN_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_ASSOC_AUTO_SCAN_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS	0
+#define COEX_RF_ON_FLAGS		0
+#define COEX_RF_OFF_FLAGS		0
+#define COEX_STAND_ALONE_DEBUG_FLAGS	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+					 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK)
+#define COEX_IPAN_ASSOC_LEVEL_FLAGS (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+				     COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK | \
+				     COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK)
+#define COEX_RSRVD1_FLAGS		0
+#define COEX_RSRVD2_FLAGS		0
+/* XOR_RF_ON is the event wrapping all radio ownership. We need
+ * DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network. */
+#define COEX_XOR_RF_ON_FLAGS	    (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_MSK | \
+				     COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK | \
+				     COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK)
+
+/* LMAC OP CODES */
+#define REPLY_PAD			0x0
+#define REPLY_ALIVE			0x1
+#define REPLY_ERROR			0x2
+#define REPLY_ECHO			0x3
+#define REPLY_HALT			0x6
+
+/* RXON state commands */
+#define REPLY_RX_ON			0x10
+#define REPLY_RX_ON_ASSOC		0x11
+#define REPLY_RX_OFF			0x12
+#define REPLY_QOS_PARAM			0x13
+#define REPLY_RX_ON_TIMING		0x14
+#define REPLY_INTERNAL_QOS_PARAM	0x15
+#define REPLY_RX_INT_TIMEOUT_CNFG	0x16
+#define REPLY_NULL			0x17
+
+/* Multi-Station support */
+#define REPLY_ADD_STA			0x18
+#define REPLY_REMOVE_STA		0x19
+#define REPLY_RESET_ALL_STA		0x1a
+
+/* RX, TX */
+#define REPLY_ALM_RX			0x1b
+#define REPLY_TX			0x1c
+#define REPLY_TXFIFO_FLUSH		0x1e
+
+/* MISC commands */
+#define REPLY_MGMT_MCAST_KEY		0x1f
+#define REPLY_WEPKEY			0x20
+#define REPLY_INIT_IV			0x21
+#define REPLY_WRITE_MIB			0x22
+#define REPLY_READ_MIB			0x23
+#define REPLY_RADIO_FE			0x24
+#define REPLY_TXFIFO_CFG		0x25
+#define REPLY_WRITE_READ		0x26
+#define REPLY_INSTALL_SEC_KEY		0x27
+
+
+#define REPLY_RATE_SCALE		0x47
+#define REPLY_LEDS_CMD			0x48
+#define REPLY_TX_LINK_QUALITY_CMD	0x4e
+#define REPLY_ANA_MIB_OVERRIDE_CMD	0x4f
+#define REPLY_WRITE2REG_CMD		0x50
+
+/* winfi-wifi coexistence */
+#define COEX_PRIORITY_TABLE_CMD		0x5a
+#define COEX_MEDIUM_NOTIFICATION	0x5b
+#define COEX_EVENT_CMD			0x5c
+
+/* more Protocol and Protocol-test commands */
+#define REPLY_MAX_SLEEP_TIME_CMD	0x61
+#define CALIBRATION_CFG_CMD		0x65
+#define CALIBRATION_RES_NOTIFICATION	0x66
+#define CALIBRATION_COMPLETE_NOTIFICATION	0x67
+
+/* Measurements */
+#define REPLY_QUIET_CMD			0x71
+#define REPLY_CHANNEL_SWITCH		0x72
+#define CHANNEL_SWITCH_NOTIFICATION	0x73
+
+#define REPLY_SPECTRUM_MEASUREMENT_CMD	0x74
+#define SPECTRUM_MEASURE_NOTIFICATION	0x75
+#define REPLY_MEASUREMENT_ABORT_CMD	0x76
+
+/* Power Management */
+#define POWER_TABLE_CMD			0x77
+#define SAVE_RESTORE_ADRESS_CMD		0x78
+#define REPLY_WATERMARK_CMD		0x79
+#define PM_DEBUG_STATISTIC_NOTIFIC	0x7B
+#define PD_FLUSH_N_NOTIFICATION		0x7C
+
+/* Scan commands and notifications */
+#define REPLY_SCAN_REQUEST_CMD		0x80
+#define REPLY_SCAN_ABORT_CMD		0x81
+#define SCAN_START_NOTIFICATION		0x82
+#define SCAN_RESULTS_NOTIFICATION	0x83
+#define SCAN_COMPLETE_NOTIFICATION	0x84
+
+/* Continuous TX commands */
+#define REPLY_CONT_TX_CMD		0x85
+#define END_OF_CONT_TX_NOTIFICATION	0x86
+
+/* Timer/Eeprom commands */
+#define TIMER_CMD			0x87
+#define EEPROM_WRITE_CMD		0x88
+
+/* PAPD commands */
+#define FEEDBACK_REQUEST_NOTIFICATION	0x8b
+#define REPLY_CW_CMD			0x8c
+
+/* IBSS/AP commands Continue */
+#define BEACON_NOTIFICATION		0x90
+#define REPLY_TX_BEACON			0x91
+#define REPLY_REQUEST_ATIM		0x93
+#define WHO_IS_AWAKE_NOTIFICATION	0x94
+#define TX_PWR_DBM_LIMIT_CMD		0x95
+#define QUIET_NOTIFICATION		0x96
+#define TX_PWR_TABLE_CMD		0x97
+#define TX_ANT_CONFIGURATION_CMD	0x98
+#define MEASURE_ABORT_NOTIFICATION	0x99
+#define REPLY_CALIBRATION_TUNE		0x9a
+
+/* bt config command */
+#define REPLY_BT_CONFIG			0x9b
+#define REPLY_STATISTICS_CMD		0x9c
+#define STATISTICS_NOTIFICATION		0x9d
+
+/* RF-KILL commands and notifications */
+#define REPLY_CARD_STATE_CMD		0xa0
+#define CARD_STATE_NOTIFICATION		0xa1
+
+/* Missed beacons notification */
+#define MISSED_BEACONS_NOTIFICATION	0xa2
+#define MISSED_BEACONS_NOTIFICATION_TH_CMD	0xa3
+
+#define REPLY_CT_KILL_CONFIG_CMD	0xa4
+
+/* HD commands and notifications */
+#define REPLY_HD_PARAMS_CMD		0xa6
+#define HD_PARAMS_NOTIFICATION		0xa7
+#define SENSITIVITY_CMD			0xa8
+#define U_APSD_PARAMS_CMD		0xa9
+#define NOISY_PLATFORM_CMD		0xaa
+#define ILLEGAL_CMD			0xac
+#define REPLY_PHY_CALIBRATION_CMD	0xb0
+#define REPLAY_RX_GAIN_CALIB_CMD	0xb1
+
+/* WiPAN commands */
+#define REPLY_WIPAN_PARAMS_CMD		0xb2
+#define REPLY_WIPAN_RX_ON_CMD		0xb3
+#define REPLY_WIPAN_RX_ON_TIMING	0xb4
+#define REPLY_WIPAN_TX_PWR_TABLE_CMD	0xb5
+#define REPLY_WIPAN_RXON_ASSOC_CMD	0xb6
+#define REPLY_WIPAN_QOS_PARAM		0xb7
+#define WIPAN_REPLY_WEPKEY		0xb8
+
+/* BeamForming commands */
+#define BEAMFORMER_CFG_CMD		0xba
+#define BEAMFORMEE_NOTIFICATION		0xbb
+
+/* TGn new Commands */
+#define REPLY_RX_PHY_CMD		0xc0
+#define REPLY_RX_MPDU_CMD		0xc1
+#define REPLY_MULTICAST_HASH		0xc2
+#define REPLY_KDR_RX			0xc3
+#define REPLY_RX_DSP_EXT_INFO		0xc4
+#define REPLY_COMPRESSED_BA		0xc5
+
+/* PNC commands */
+#define PNC_CONFIG_CMD			0xc8
+#define PNC_UPDATE_TABLE_CMD		0xc9
+#define XVT_GENERAL_CTRL_CMD		0xca
+#define REPLY_LEGACY_RADIO_FE		0xdd
+
+/* WoWLAN commands */
+#define WOWLAN_PATTERNS			0xe0
+#define WOWLAN_WAKEUP_FILTER		0xe1
+#define WOWLAN_TSC_RSC_PARAM		0xe2
+#define WOWLAN_TKIP_PARAM		0xe3
+#define WOWLAN_KEK_KCK_MATERIAL		0xe4
+#define WOWLAN_GET_STATUSES		0xe5
+#define WOWLAN_TX_POWER_PER_DB		0xe6
+#define REPLY_WOWLAN_GET_STATUSES       WOWLAN_GET_STATUSES
+
+#define REPLY_DEBUG_CMD			0xf0
+#define REPLY_DSP_DEBUG_CMD		0xf1
+#define REPLY_DEBUG_MONITOR_CMD		0xf2
+#define REPLY_DEBUG_XVT_CMD		0xf3
+#define REPLY_DEBUG_DC_CALIB		0xf4
+#define REPLY_DYNAMIC_BP		0xf5
+
+/* General purpose Commands */
+#define REPLY_GP1_CMD			0xfa
+#define REPLY_GP2_CMD			0xfb
+#define REPLY_GP3_CMD			0xfc
+#define REPLY_GP4_CMD			0xfd
+#define REPLY_REPLAY_WRAPPER		0xfe
+#define REPLY_FRAME_DURATION_CALC_CMD	0xff
+
+#define LMAC_COMMAND_ID_MAX		0xff
+#define LMAC_COMMAND_ID_NUM		(LMAC_COMMAND_ID_MAX + 1)
+
+
+/* Calibration */
+
+enum {
+	PHY_CALIBRATE_DC_CMD			= 0,
+	PHY_CALIBRATE_LO_CMD			= 1,
+	PHY_CALIBRATE_RX_BB_CMD			= 2,
+	PHY_CALIBRATE_TX_IQ_CMD			= 3,
+	PHY_CALIBRATE_RX_IQ_CMD			= 4,
+	PHY_CALIBRATION_NOISE_CMD		= 5,
+	PHY_CALIBRATE_AGC_TABLE_CMD		= 6,
+	PHY_CALIBRATE_CRYSTAL_FRQ_CMD		= 7,
+	PHY_CALIBRATE_OPCODES_NUM,
+	SHILOH_PHY_CALIBRATE_DC_CMD		= 8,
+	SHILOH_PHY_CALIBRATE_LO_CMD		= 9,
+	SHILOH_PHY_CALIBRATE_RX_BB_CMD		= 10,
+	SHILOH_PHY_CALIBRATE_TX_IQ_CMD		= 11,
+	SHILOH_PHY_CALIBRATE_RX_IQ_CMD		= 12,
+	SHILOH_PHY_CALIBRATION_NOISE_CMD	= 13,
+	SHILOH_PHY_CALIBRATE_AGC_TABLE_CMD	= 14,
+	SHILOH_PHY_CALIBRATE_CRYSTAL_FRQ_CMD	= 15,
+	SHILOH_PHY_CALIBRATE_BASE_BAND_CMD	= 16,
+	SHILOH_PHY_CALIBRATE_TXIQ_PERIODIC_CMD	= 17,
+	CALIBRATION_CMD_NUM,
+};
+
+struct iwm_lmac_calib_hdr {
+	u8 opcode;
+	u8 first_grp;
+	u8 grp_num;
+	u8 all_data_valid;
+} __attribute__ ((packed));
+
+#define IWM_LMAC_CALIB_FREQ_GROUPS_NR	7
+#define IWM_CALIB_FREQ_GROUPS_NR	5
+#define IWM_CALIB_DC_MODES_NR		12
+
+struct iwm_calib_rxiq_entry {
+	u16 ptam_postdist_ars;
+	u16 ptam_postdist_arc;
+} __attribute__ ((packed));
+
+struct iwm_calib_rxiq_group {
+	struct iwm_calib_rxiq_entry mode[IWM_CALIB_DC_MODES_NR];
+} __attribute__ ((packed));
+
+struct iwm_lmac_calib_rxiq {
+	struct iwm_calib_rxiq_group group[IWM_LMAC_CALIB_FREQ_GROUPS_NR];
+} __attribute__ ((packed));
+
+struct iwm_calib_rxiq {
+	struct iwm_lmac_calib_hdr hdr;
+	struct iwm_calib_rxiq_group group[IWM_CALIB_FREQ_GROUPS_NR];
+} __attribute__ ((packed));
+
+#define LMAC_STA_ID_SEED	0x0f
+#define LMAC_STA_ID_POS		0
+
+#define LMAC_STA_COLOR_SEED	0x7
+#define LMAC_STA_COLOR_POS	4
+
+struct iwm_lmac_power_report {
+	u8 pa_status;
+	u8 pa_integ_res_A[3];
+	u8 pa_integ_res_B[3];
+	u8 pa_integ_res_C[3];
+} __attribute__ ((packed));
+
+struct iwm_lmac_tx_resp {
+	u8 frame_cnt; /* 1-no aggregation, greater then 1 - aggregation */
+	u8 bt_kill_cnt;
+	__le16 retry_cnt;
+	__le32 initial_tx_rate;
+	__le16 wireless_media_time;
+	struct iwm_lmac_power_report power_report;
+	__le32 tfd_info;
+	__le16 seq_ctl;
+	__le16 byte_cnt;
+	u8 tlc_rate_info;
+	u8 ra_tid;
+	__le16 frame_ctl;
+	__le32 status;
+} __attribute__ ((packed));
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
new file mode 100644
index 00000000000..6a2640f16b6
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -0,0 +1,680 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/ieee80211.h>
+#include <linux/wireless.h>
+
+#include "iwm.h"
+#include "debug.h"
+#include "bus.h"
+#include "umac.h"
+#include "commands.h"
+#include "hal.h"
+#include "fw.h"
+#include "rx.h"
+
+static struct iwm_conf def_iwm_conf = {
+
+	.sdio_ior_timeout	= 5000,
+	.init_calib_map		= BIT(PHY_CALIBRATE_DC_CMD)	|
+				  BIT(PHY_CALIBRATE_LO_CMD)	|
+				  BIT(PHY_CALIBRATE_TX_IQ_CMD)	|
+				  BIT(PHY_CALIBRATE_RX_IQ_CMD),
+	.periodic_calib_map	= BIT(PHY_CALIBRATE_DC_CMD)	|
+				  BIT(PHY_CALIBRATE_LO_CMD)	|
+				  BIT(PHY_CALIBRATE_TX_IQ_CMD)	|
+				  BIT(PHY_CALIBRATE_RX_IQ_CMD)	|
+				  BIT(SHILOH_PHY_CALIBRATE_BASE_BAND_CMD),
+	.reset_on_fatal_err	= 1,
+	.auto_connect		= 1,
+	.wimax_not_present	= 0,
+	.enable_qos		= 1,
+	.mode			= UMAC_MODE_BSS,
+
+	/* UMAC configuration */
+	.power_index		= 0,
+	.frag_threshold		= IEEE80211_MAX_FRAG_THRESHOLD,
+	.rts_threshold		= IEEE80211_MAX_RTS_THRESHOLD,
+	.cts_to_self		= 0,
+
+	.assoc_timeout		= 2,
+	.roam_timeout		= 10,
+	.wireless_mode		= WIRELESS_MODE_11A | WIRELESS_MODE_11G,
+	.coexist_mode		= COEX_MODE_CM,
+
+	/* IBSS */
+	.ibss_band		= UMAC_BAND_2GHZ,
+	.ibss_channel		= 1,
+
+	.mac_addr		= {0x00, 0x02, 0xb3, 0x01, 0x02, 0x03},
+};
+
+static int modparam_reset;
+module_param_named(reset, modparam_reset, bool, 0644);
+MODULE_PARM_DESC(reset, "reset on firmware errors (default 0 [not reset])");
+
+int iwm_mode_to_nl80211_iftype(int mode)
+{
+	switch (mode) {
+	case UMAC_MODE_BSS:
+		return NL80211_IFTYPE_STATION;
+	case UMAC_MODE_IBSS:
+		return NL80211_IFTYPE_ADHOC;
+	default:
+		return NL80211_IFTYPE_UNSPECIFIED;
+	}
+
+	return 0;
+}
+
+static void iwm_statistics_request(struct work_struct *work)
+{
+	struct iwm_priv *iwm =
+		container_of(work, struct iwm_priv, stats_request.work);
+
+	iwm_send_umac_stats_req(iwm, 0);
+}
+
+static void iwm_reset_worker(struct work_struct *work)
+{
+	struct iwm_priv *iwm;
+	struct iwm_umac_profile *profile = NULL;
+	int uninitialized_var(ret), retry = 0;
+
+	iwm = container_of(work, struct iwm_priv, reset_worker);
+
+	if (iwm->umac_profile_active) {
+		profile = kmalloc(sizeof(struct iwm_umac_profile), GFP_KERNEL);
+		if (profile)
+			memcpy(profile, iwm->umac_profile, sizeof(*profile));
+		else
+			IWM_ERR(iwm, "Couldn't alloc memory for profile\n");
+	}
+
+	iwm_down(iwm);
+
+	while (retry++ < 3) {
+		ret = iwm_up(iwm);
+		if (!ret)
+			break;
+
+		schedule_timeout_uninterruptible(10 * HZ);
+	}
+
+	if (ret) {
+		IWM_WARN(iwm, "iwm_up() failed: %d\n", ret);
+
+		kfree(profile);
+		return;
+	}
+
+	if (profile) {
+		IWM_DBG_MLME(iwm, DBG, "Resend UMAC profile\n");
+		memcpy(iwm->umac_profile, profile, sizeof(*profile));
+		iwm_send_mlme_profile(iwm);
+		kfree(profile);
+	}
+}
+
+static void iwm_watchdog(unsigned long data)
+{
+	struct iwm_priv *iwm = (struct iwm_priv *)data;
+
+	IWM_WARN(iwm, "Watchdog expired: UMAC stalls!\n");
+
+	if (modparam_reset)
+		schedule_work(&iwm->reset_worker);
+}
+
+int iwm_priv_init(struct iwm_priv *iwm)
+{
+	int i;
+	char name[32];
+
+	iwm->status = 0;
+	INIT_LIST_HEAD(&iwm->pending_notif);
+	init_waitqueue_head(&iwm->notif_queue);
+	init_waitqueue_head(&iwm->nonwifi_queue);
+	init_waitqueue_head(&iwm->mlme_queue);
+	memcpy(&iwm->conf, &def_iwm_conf, sizeof(struct iwm_conf));
+	spin_lock_init(&iwm->tx_credit.lock);
+	INIT_LIST_HEAD(&iwm->wifi_pending_cmd);
+	INIT_LIST_HEAD(&iwm->nonwifi_pending_cmd);
+	iwm->wifi_seq_num = UMAC_WIFI_SEQ_NUM_BASE;
+	iwm->nonwifi_seq_num = UMAC_NONWIFI_SEQ_NUM_BASE;
+	spin_lock_init(&iwm->cmd_lock);
+	iwm->scan_id = 1;
+	INIT_DELAYED_WORK(&iwm->stats_request, iwm_statistics_request);
+	INIT_WORK(&iwm->reset_worker, iwm_reset_worker);
+	INIT_LIST_HEAD(&iwm->bss_list);
+
+	skb_queue_head_init(&iwm->rx_list);
+	INIT_LIST_HEAD(&iwm->rx_tickets);
+	for (i = 0; i < IWM_RX_ID_HASH; i++)
+		INIT_LIST_HEAD(&iwm->rx_packets[i]);
+
+	INIT_WORK(&iwm->rx_worker, iwm_rx_worker);
+
+	iwm->rx_wq = create_singlethread_workqueue(KBUILD_MODNAME "_rx");
+	if (!iwm->rx_wq)
+		return -EAGAIN;
+
+	for (i = 0; i < IWM_TX_QUEUES; i++) {
+		INIT_WORK(&iwm->txq[i].worker, iwm_tx_worker);
+		snprintf(name, 32, KBUILD_MODNAME "_tx_%d", i);
+		iwm->txq[i].id = i;
+		iwm->txq[i].wq = create_singlethread_workqueue(name);
+		if (!iwm->txq[i].wq)
+			return -EAGAIN;
+
+		skb_queue_head_init(&iwm->txq[i].queue);
+	}
+
+	for (i = 0; i < IWM_NUM_KEYS; i++)
+		memset(&iwm->keys[i], 0, sizeof(struct iwm_key));
+
+	iwm->default_key = NULL;
+
+	init_timer(&iwm->watchdog);
+	iwm->watchdog.function = iwm_watchdog;
+	iwm->watchdog.data = (unsigned long)iwm;
+
+	return 0;
+}
+
+/*
+ * We reset all the structures, and we reset the UMAC.
+ * After calling this routine, you're expected to reload
+ * the firmware.
+ */
+void iwm_reset(struct iwm_priv *iwm)
+{
+	struct iwm_notif *notif, *next;
+
+	if (test_bit(IWM_STATUS_READY, &iwm->status))
+		iwm_target_reset(iwm);
+
+	iwm->status = 0;
+	iwm->scan_id = 1;
+
+	list_for_each_entry_safe(notif, next, &iwm->pending_notif, pending) {
+		list_del(&notif->pending);
+		kfree(notif->buf);
+		kfree(notif);
+	}
+
+	iwm_cmd_flush(iwm);
+
+	flush_workqueue(iwm->rx_wq);
+
+	iwm_link_off(iwm);
+}
+
+/*
+ * Notification code:
+ *
+ * We're faced with the following issue: Any host command can
+ * have an answer or not, and if there's an answer to expect,
+ * it can be treated synchronously or asynchronously.
+ * To work around the synchronous answer case, we implemented
+ * our notification mechanism.
+ * When a code path needs to wait for a command response
+ * synchronously, it calls notif_handle(), which waits for the
+ * right notification to show up, and then process it. Before
+ * starting to wait, it registered as a waiter for this specific
+ * answer (by toggling a bit in on of the handler_map), so that
+ * the rx code knows that it needs to send a notification to the
+ * waiting processes. It does so by calling iwm_notif_send(),
+ * which adds the notification to the pending notifications list,
+ * and then wakes the waiting processes up.
+ */
+int iwm_notif_send(struct iwm_priv *iwm, struct iwm_wifi_cmd *cmd,
+		   u8 cmd_id, u8 source, u8 *buf, unsigned long buf_size)
+{
+	struct iwm_notif *notif;
+
+	notif = kzalloc(sizeof(struct iwm_notif), GFP_KERNEL);
+	if (!notif) {
+		IWM_ERR(iwm, "Couldn't alloc memory for notification\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&notif->pending);
+	notif->cmd = cmd;
+	notif->cmd_id = cmd_id;
+	notif->src = source;
+	notif->buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!notif->buf) {
+		IWM_ERR(iwm, "Couldn't alloc notification buffer\n");
+		kfree(notif);
+		return -ENOMEM;
+	}
+	notif->buf_size = buf_size;
+	memcpy(notif->buf, buf, buf_size);
+	list_add_tail(&notif->pending, &iwm->pending_notif);
+
+	wake_up_interruptible(&iwm->notif_queue);
+
+	return 0;
+}
+
+static struct iwm_notif *iwm_notif_find(struct iwm_priv *iwm, u32 cmd,
+					u8 source)
+{
+	struct iwm_notif *notif, *next;
+
+	list_for_each_entry_safe(notif, next, &iwm->pending_notif, pending) {
+		if ((notif->cmd_id == cmd) && (notif->src == source)) {
+			list_del(&notif->pending);
+			return notif;
+		}
+	}
+
+	return NULL;
+}
+
+static struct iwm_notif *iwm_notif_wait(struct iwm_priv *iwm, u32 cmd,
+					u8 source, long timeout)
+{
+	int ret;
+	struct iwm_notif *notif;
+	unsigned long *map = NULL;
+
+	switch (source) {
+	case IWM_SRC_LMAC:
+		map = &iwm->lmac_handler_map[0];
+		break;
+	case IWM_SRC_UMAC:
+		map = &iwm->umac_handler_map[0];
+		break;
+	case IWM_SRC_UDMA:
+		map = &iwm->udma_handler_map[0];
+		break;
+	}
+
+	set_bit(cmd, map);
+
+	ret = wait_event_interruptible_timeout(iwm->notif_queue,
+			 ((notif = iwm_notif_find(iwm, cmd, source)) != NULL),
+					       timeout);
+	clear_bit(cmd, map);
+
+	if (!ret)
+		return NULL;
+
+	return notif;
+}
+
+int iwm_notif_handle(struct iwm_priv *iwm, u32 cmd, u8 source, long timeout)
+{
+	int ret;
+	struct iwm_notif *notif;
+
+	notif = iwm_notif_wait(iwm, cmd, source, timeout);
+	if (!notif)
+		return -ETIME;
+
+	ret = iwm_rx_handle_resp(iwm, notif->buf, notif->buf_size, notif->cmd);
+	kfree(notif->buf);
+	kfree(notif);
+
+	return ret;
+}
+
+static int iwm_config_boot_params(struct iwm_priv *iwm)
+{
+	struct iwm_udma_nonwifi_cmd target_cmd;
+	int ret;
+
+	/* check Wimax is off and config debug monitor */
+	if (iwm->conf.wimax_not_present) {
+		u32 data1 = 0x1f;
+		u32 addr1 = 0x606BE258;
+
+		u32 data2_set = 0x0;
+		u32 data2_clr = 0x1;
+		u32 addr2 = 0x606BE100;
+
+		u32 data3 = 0x1;
+		u32 addr3 = 0x606BEC00;
+
+		target_cmd.resp = 0;
+		target_cmd.handle_by_hw = 0;
+		target_cmd.eop = 1;
+
+		target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
+		target_cmd.addr = cpu_to_le32(addr1);
+		target_cmd.op1_sz = cpu_to_le32(sizeof(u32));
+		target_cmd.op2 = 0;
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, &data1);
+		if (ret < 0) {
+			IWM_ERR(iwm, "iwm_hal_send_target_cmd failed\n");
+			return ret;
+		}
+
+		target_cmd.opcode = UMAC_HDI_OUT_OPCODE_READ_MODIFY_WRITE;
+		target_cmd.addr = cpu_to_le32(addr2);
+		target_cmd.op1_sz = cpu_to_le32(data2_set);
+		target_cmd.op2 = cpu_to_le32(data2_clr);
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, &data1);
+		if (ret < 0) {
+			IWM_ERR(iwm, "iwm_hal_send_target_cmd failed\n");
+			return ret;
+		}
+
+		target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
+		target_cmd.addr = cpu_to_le32(addr3);
+		target_cmd.op1_sz = cpu_to_le32(sizeof(u32));
+		target_cmd.op2 = 0;
+
+		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, &data3);
+		if (ret < 0) {
+			IWM_ERR(iwm, "iwm_hal_send_target_cmd failed\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+void iwm_init_default_profile(struct iwm_priv *iwm,
+			      struct iwm_umac_profile *profile)
+{
+	memset(profile, 0, sizeof(struct iwm_umac_profile));
+
+	profile->sec.auth_type = UMAC_AUTH_TYPE_OPEN;
+	profile->sec.flags = UMAC_SEC_FLG_LEGACY_PROFILE;
+	profile->sec.ucast_cipher = UMAC_CIPHER_TYPE_NONE;
+	profile->sec.mcast_cipher = UMAC_CIPHER_TYPE_NONE;
+
+	if (iwm->conf.enable_qos)
+		profile->flags |= cpu_to_le16(UMAC_PROFILE_QOS_ALLOWED);
+
+	profile->wireless_mode = iwm->conf.wireless_mode;
+	profile->mode = cpu_to_le32(iwm->conf.mode);
+
+	profile->ibss.atim = 0;
+	profile->ibss.beacon_interval = 100;
+	profile->ibss.join_only = 0;
+	profile->ibss.band = iwm->conf.ibss_band;
+	profile->ibss.channel = iwm->conf.ibss_channel;
+}
+
+void iwm_link_on(struct iwm_priv *iwm)
+{
+	netif_carrier_on(iwm_to_ndev(iwm));
+	netif_tx_wake_all_queues(iwm_to_ndev(iwm));
+
+	iwm_send_umac_stats_req(iwm, 0);
+}
+
+void iwm_link_off(struct iwm_priv *iwm)
+{
+	struct iw_statistics *wstats = &iwm->wstats;
+	int i;
+
+	netif_tx_stop_all_queues(iwm_to_ndev(iwm));
+	netif_carrier_off(iwm_to_ndev(iwm));
+
+	for (i = 0; i < IWM_TX_QUEUES; i++) {
+		skb_queue_purge(&iwm->txq[i].queue);
+
+		iwm->txq[i].concat_count = 0;
+		iwm->txq[i].concat_ptr = iwm->txq[i].concat_buf;
+
+		flush_workqueue(iwm->txq[i].wq);
+	}
+
+	iwm_rx_free(iwm);
+
+	cancel_delayed_work(&iwm->stats_request);
+	memset(wstats, 0, sizeof(struct iw_statistics));
+	wstats->qual.updated = IW_QUAL_ALL_INVALID;
+
+	del_timer_sync(&iwm->watchdog);
+}
+
+static void iwm_bss_list_clean(struct iwm_priv *iwm)
+{
+	struct iwm_bss_info *bss, *next;
+
+	list_for_each_entry_safe(bss, next, &iwm->bss_list, node) {
+		list_del(&bss->node);
+		kfree(bss->bss);
+		kfree(bss);
+	}
+}
+
+static int iwm_channels_init(struct iwm_priv *iwm)
+{
+	int ret;
+
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	if (iwm->conf.hw_b0) {
+		IWM_INFO(iwm, "Workaround EEPROM channels for B0 hardware\n");
+		return 0;
+	}
+#endif
+
+	ret = iwm_send_umac_channel_list(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "Send channel list failed\n");
+		return ret;
+	}
+
+	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Didn't get a channel list notification\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int iwm_up(struct iwm_priv *iwm)
+{
+	int ret;
+	struct iwm_notif *notif_reboot, *notif_ack = NULL;
+
+	ret = iwm_bus_enable(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "Couldn't enable function\n");
+		return ret;
+	}
+
+	iwm_rx_setup_handlers(iwm);
+
+	/* Wait for initial BARKER_REBOOT from hardware */
+	notif_reboot = iwm_notif_wait(iwm, IWM_BARKER_REBOOT_NOTIFICATION,
+				      IWM_SRC_UDMA, 2 * HZ);
+	if (!notif_reboot) {
+		IWM_ERR(iwm, "Wait for REBOOT_BARKER timeout\n");
+		goto err_disable;
+	}
+
+	/* We send the barker back */
+	ret = iwm_bus_send_chunk(iwm, notif_reboot->buf, 16);
+	if (ret) {
+		IWM_ERR(iwm, "REBOOT barker response failed\n");
+		kfree(notif_reboot);
+		goto err_disable;
+	}
+
+	kfree(notif_reboot->buf);
+	kfree(notif_reboot);
+
+	/* Wait for ACK_BARKER from hardware */
+	notif_ack = iwm_notif_wait(iwm, IWM_ACK_BARKER_NOTIFICATION,
+				   IWM_SRC_UDMA, 2 * HZ);
+	if (!notif_ack) {
+		IWM_ERR(iwm, "Wait for ACK_BARKER timeout\n");
+		goto err_disable;
+	}
+
+	kfree(notif_ack->buf);
+	kfree(notif_ack);
+
+	/* We start to config static boot parameters */
+	ret = iwm_config_boot_params(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "Config boot parameters failed\n");
+		goto err_disable;
+	}
+
+	ret = iwm_read_mac(iwm, iwm_to_ndev(iwm)->dev_addr);
+	if (ret) {
+		IWM_ERR(iwm, "MAC reading failed\n");
+		goto err_disable;
+	}
+
+	/* We can load the FWs */
+	ret = iwm_load_fw(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "FW loading failed\n");
+		goto err_disable;
+	}
+
+	/* We configure the UMAC and enable the wifi module */
+	ret = iwm_send_umac_config(iwm,
+			cpu_to_le32(UMAC_RST_CTRL_FLG_WIFI_CORE_EN) |
+			cpu_to_le32(UMAC_RST_CTRL_FLG_WIFI_LINK_EN) |
+			cpu_to_le32(UMAC_RST_CTRL_FLG_WIFI_MLME_EN));
+	if (ret) {
+		IWM_ERR(iwm, "UMAC config failed\n");
+		goto err_fw;
+	}
+
+	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_WIFI_CORE_STATUS,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+	if (ret) {
+		IWM_ERR(iwm, "Didn't get a wifi core status notification\n");
+		goto err_fw;
+	}
+
+	if (iwm->core_enabled != (UMAC_NTFY_WIFI_CORE_STATUS_LINK_EN |
+				  UMAC_NTFY_WIFI_CORE_STATUS_MLME_EN)) {
+		IWM_DBG_BOOT(iwm, DBG, "Not all cores enabled:0x%x\n",
+			     iwm->core_enabled);
+		ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_WIFI_CORE_STATUS,
+			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
+		if (ret) {
+			IWM_ERR(iwm, "Didn't get a core status notification\n");
+			goto err_fw;
+		}
+
+		if (iwm->core_enabled != (UMAC_NTFY_WIFI_CORE_STATUS_LINK_EN |
+					  UMAC_NTFY_WIFI_CORE_STATUS_MLME_EN)) {
+			IWM_ERR(iwm, "Not all cores enabled: 0x%x\n",
+				iwm->core_enabled);
+			goto err_fw;
+		} else {
+			IWM_INFO(iwm, "All cores enabled\n");
+		}
+	}
+
+	iwm->umac_profile = kmalloc(sizeof(struct iwm_umac_profile),
+				    GFP_KERNEL);
+	if (!iwm->umac_profile) {
+		IWM_ERR(iwm, "Couldn't alloc memory for profile\n");
+		goto err_fw;
+	}
+
+	iwm_init_default_profile(iwm, iwm->umac_profile);
+
+	ret = iwm_channels_init(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't init channels\n");
+		goto err_profile;
+	}
+
+	/* Set the READY bit to indicate interface is brought up successfully */
+	set_bit(IWM_STATUS_READY, &iwm->status);
+
+	return 0;
+
+ err_profile:
+	kfree(iwm->umac_profile);
+	iwm->umac_profile = NULL;
+
+ err_fw:
+	iwm_eeprom_exit(iwm);
+
+ err_disable:
+	ret = iwm_bus_disable(iwm);
+	if (ret < 0)
+		IWM_ERR(iwm, "Couldn't disable function\n");
+
+	return -EIO;
+}
+
+int iwm_down(struct iwm_priv *iwm)
+{
+	int ret;
+
+	/* The interface is already down */
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return 0;
+
+	if (iwm->scan_request) {
+		cfg80211_scan_done(iwm->scan_request, true);
+		iwm->scan_request = NULL;
+	}
+
+	clear_bit(IWM_STATUS_READY, &iwm->status);
+
+	iwm_eeprom_exit(iwm);
+	kfree(iwm->umac_profile);
+	iwm->umac_profile = NULL;
+	iwm_bss_list_clean(iwm);
+
+	iwm->default_key = NULL;
+	iwm->core_enabled = 0;
+
+	ret = iwm_bus_disable(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't disable function\n");
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
new file mode 100644
index 00000000000..68e2c3b6c7a
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -0,0 +1,162 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+/*
+ * This is the netdev related hooks for iwm.
+ *
+ * Some interesting code paths:
+ *
+ * iwm_open() (Called at netdev interface bringup time)
+ *  -> iwm_up() (main.c)
+ *      -> iwm_bus_enable()
+ *          -> if_sdio_enable() (In case of an SDIO bus)
+ *              -> sdio_enable_func()
+ *      -> iwm_notif_wait(BARKER_REBOOT) (wait for reboot barker)
+ *      -> iwm_notif_wait(ACK_BARKER) (wait for ACK barker)
+ *      -> iwm_load_fw() (fw.c)
+ *          -> iwm_load_umac()
+ *          -> iwm_load_lmac() (Calibration LMAC)
+ *          -> iwm_load_lmac() (Operational LMAC)
+ *      -> iwm_send_umac_config()
+ *
+ * iwm_stop() (Called at netdev interface bringdown time)
+ *  -> iwm_down()
+ *      -> iwm_bus_disable()
+ *          -> if_sdio_disable() (In case of an SDIO bus)
+ *              -> sdio_disable_func()
+ */
+#include <linux/netdevice.h>
+
+#include "iwm.h"
+#include "cfg80211.h"
+#include "debug.h"
+
+static int iwm_open(struct net_device *ndev)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(ndev);
+	int ret = 0;
+
+	if (!test_bit(IWM_RADIO_RFKILL_SW, &iwm->radio))
+		ret = iwm_up(iwm);
+
+	return ret;
+}
+
+static int iwm_stop(struct net_device *ndev)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(ndev);
+	int ret = 0;
+
+	if (!test_bit(IWM_RADIO_RFKILL_SW, &iwm->radio))
+		ret = iwm_down(iwm);
+
+	return ret;
+}
+
+/*
+ * iwm AC to queue mapping
+ *
+ * AC_VO -> queue 3
+ * AC_VI -> queue 2
+ * AC_BE -> queue 1
+ * AC_BK -> queue 0
+ */
+static const u16 iwm_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
+
+static u16 iwm_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	skb->priority = cfg80211_classify8021d(skb);
+
+	return iwm_1d_to_queue[skb->priority];
+}
+
+static const struct net_device_ops iwm_netdev_ops = {
+	.ndo_open		= iwm_open,
+	.ndo_stop		= iwm_stop,
+	.ndo_start_xmit		= iwm_xmit_frame,
+	.ndo_select_queue	= iwm_select_queue,
+};
+
+void *iwm_if_alloc(int sizeof_bus, struct device *dev,
+		   struct iwm_if_ops *if_ops)
+{
+	struct net_device *ndev;
+	struct wireless_dev *wdev;
+	struct iwm_priv *iwm;
+	int ret = 0;
+
+	wdev = iwm_wdev_alloc(sizeof_bus, dev);
+	if (!wdev) {
+		dev_err(dev, "no memory for wireless device instance\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	iwm = wdev_to_iwm(wdev);
+	iwm->bus_ops = if_ops;
+	iwm->wdev = wdev;
+	iwm_priv_init(iwm);
+	wdev->iftype = iwm_mode_to_nl80211_iftype(iwm->conf.mode);
+
+	ndev = alloc_netdev_mq(0, "wlan%d", ether_setup,
+			       IWM_TX_QUEUES);
+	if (!ndev) {
+		dev_err(dev, "no memory for network device instance\n");
+		goto out_wdev;
+	}
+
+	ndev->netdev_ops = &iwm_netdev_ops;
+	ndev->wireless_handlers = &iwm_iw_handler_def;
+	ndev->ieee80211_ptr = wdev;
+	SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
+	ret = register_netdev(ndev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register netdev: %d\n", ret);
+		goto out_ndev;
+	}
+
+	wdev->netdev = ndev;
+
+	return iwm;
+
+ out_ndev:
+	free_netdev(ndev);
+
+ out_wdev:
+	iwm_wdev_free(iwm);
+	return ERR_PTR(ret);
+}
+
+void iwm_if_free(struct iwm_priv *iwm)
+{
+	int i;
+
+	if (!iwm_to_ndev(iwm))
+		return;
+
+	unregister_netdev(iwm_to_ndev(iwm));
+	free_netdev(iwm_to_ndev(iwm));
+	iwm_wdev_free(iwm);
+	destroy_workqueue(iwm->rx_wq);
+	for (i = 0; i < IWM_TX_QUEUES; i++)
+		destroy_workqueue(iwm->txq[i].wq);
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
new file mode 100644
index 00000000000..d73cf96c6dc
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -0,0 +1,1431 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+#include <linux/if_arp.h>
+#include <linux/list.h>
+#include <net/iw_handler.h>
+
+#include "iwm.h"
+#include "debug.h"
+#include "hal.h"
+#include "umac.h"
+#include "lmac.h"
+#include "commands.h"
+#include "rx.h"
+#include "cfg80211.h"
+#include "eeprom.h"
+
+static int iwm_rx_check_udma_hdr(struct iwm_udma_in_hdr *hdr)
+{
+	if ((le32_to_cpu(hdr->cmd) == UMAC_PAD_TERMINAL) ||
+	    (le32_to_cpu(hdr->size) == UMAC_PAD_TERMINAL))
+		return -EINVAL;
+
+	return 0;
+}
+
+static inline int iwm_rx_resp_size(struct iwm_udma_in_hdr *hdr)
+{
+	return ALIGN(le32_to_cpu(hdr->size) + sizeof(struct iwm_udma_in_hdr),
+		     16);
+}
+
+/*
+ * Notification handlers:
+ *
+ * For every possible notification we can receive from the
+ * target, we have a handler.
+ * When we get a target notification, and there is no one
+ * waiting for it, it's just processed through the rx code
+ * path:
+ *
+ * iwm_rx_handle()
+ *  -> iwm_rx_handle_umac()
+ *      -> iwm_rx_handle_wifi()
+ *          -> iwm_rx_handle_resp()
+ *              -> iwm_ntf_*()
+ *
+ *      OR
+ *
+ *      -> iwm_rx_handle_non_wifi()
+ *
+ * If there are processes waiting for this notification, then
+ * iwm_rx_handle_wifi() just wakes those processes up and they
+ * grab the pending notification.
+ */
+static int iwm_ntf_error(struct iwm_priv *iwm, u8 *buf,
+			 unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_error *error;
+	struct iwm_fw_error_hdr *fw_err;
+
+	error = (struct iwm_umac_notif_error *)buf;
+	fw_err = &error->err;
+
+
+	IWM_ERR(iwm, "%cMAC FW ERROR:\n",
+	 (le32_to_cpu(fw_err->category) == UMAC_SYS_ERR_CAT_LMAC) ? 'L' : 'U');
+	IWM_ERR(iwm, "\tCategory:    %d\n", le32_to_cpu(fw_err->category));
+	IWM_ERR(iwm, "\tStatus:      0x%x\n", le32_to_cpu(fw_err->status));
+	IWM_ERR(iwm, "\tPC:          0x%x\n", le32_to_cpu(fw_err->pc));
+	IWM_ERR(iwm, "\tblink1:      %d\n", le32_to_cpu(fw_err->blink1));
+	IWM_ERR(iwm, "\tblink2:      %d\n", le32_to_cpu(fw_err->blink2));
+	IWM_ERR(iwm, "\tilink1:      %d\n", le32_to_cpu(fw_err->ilink1));
+	IWM_ERR(iwm, "\tilink2:      %d\n", le32_to_cpu(fw_err->ilink2));
+	IWM_ERR(iwm, "\tData1:       0x%x\n", le32_to_cpu(fw_err->data1));
+	IWM_ERR(iwm, "\tData2:       0x%x\n", le32_to_cpu(fw_err->data2));
+	IWM_ERR(iwm, "\tLine number: %d\n", le32_to_cpu(fw_err->line_num));
+	IWM_ERR(iwm, "\tUMAC status: 0x%x\n", le32_to_cpu(fw_err->umac_status));
+	IWM_ERR(iwm, "\tLMAC status: 0x%x\n", le32_to_cpu(fw_err->lmac_status));
+	IWM_ERR(iwm, "\tSDIO status: 0x%x\n", le32_to_cpu(fw_err->sdio_status));
+
+	return 0;
+}
+
+static int iwm_ntf_umac_alive(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_alive *alive_resp =
+			(struct iwm_umac_notif_alive *)(buf);
+	u16 status = le16_to_cpu(alive_resp->status);
+
+	if (status == UMAC_NTFY_ALIVE_STATUS_ERR) {
+		IWM_ERR(iwm, "Receive error UMAC_ALIVE\n");
+		return -EIO;
+	}
+
+	iwm_tx_credit_init_pools(iwm, alive_resp);
+
+	return 0;
+}
+
+static int iwm_ntf_init_complete(struct iwm_priv *iwm, u8 *buf,
+				 unsigned long buf_size,
+				 struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_init_complete *init_complete =
+			(struct iwm_umac_notif_init_complete *)(buf);
+	u16 status = le16_to_cpu(init_complete->status);
+
+	if (status == UMAC_NTFY_INIT_COMPLETE_STATUS_ERR) {
+		IWM_DBG_NTF(iwm, DBG, "Hardware rf kill is on (radio off)\n");
+		set_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+	} else {
+		IWM_DBG_NTF(iwm, DBG, "Hardware rf kill is off (radio on)\n");
+		clear_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+	}
+
+	return 0;
+}
+
+static int iwm_ntf_tx_credit_update(struct iwm_priv *iwm, u8 *buf,
+				    unsigned long buf_size,
+				    struct iwm_wifi_cmd *cmd)
+{
+	int pool_nr, total_freed_pages;
+	unsigned long pool_map;
+	int i, id;
+	struct iwm_umac_notif_page_dealloc *dealloc =
+			(struct iwm_umac_notif_page_dealloc *)buf;
+
+	pool_nr = GET_VAL32(dealloc->changes, UMAC_DEALLOC_NTFY_CHANGES_CNT);
+	pool_map = GET_VAL32(dealloc->changes, UMAC_DEALLOC_NTFY_CHANGES_MSK);
+
+	IWM_DBG_TX(iwm, DBG, "UMAC dealloc notification: pool nr %d, "
+		   "update map 0x%lx\n", pool_nr, pool_map);
+
+	spin_lock(&iwm->tx_credit.lock);
+
+	for (i = 0; i < pool_nr; i++) {
+		id = GET_VAL32(dealloc->grp_info[i],
+			       UMAC_DEALLOC_NTFY_GROUP_NUM);
+		if (test_bit(id, &pool_map)) {
+			total_freed_pages = GET_VAL32(dealloc->grp_info[i],
+					      UMAC_DEALLOC_NTFY_PAGE_CNT);
+			iwm_tx_credit_inc(iwm, id, total_freed_pages);
+		}
+	}
+
+	spin_unlock(&iwm->tx_credit.lock);
+
+	return 0;
+}
+
+static int iwm_ntf_umac_reset(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	IWM_DBG_NTF(iwm, DBG, "UMAC RESET done\n");
+
+	return 0;
+}
+
+static int iwm_ntf_lmac_version(struct iwm_priv *iwm, u8 *buf,
+				unsigned long buf_size,
+				struct iwm_wifi_cmd *cmd)
+{
+	IWM_DBG_NTF(iwm, INFO, "LMAC Version: %x.%x\n", buf[9], buf[8]);
+
+	return 0;
+}
+
+static int iwm_ntf_tx(struct iwm_priv *iwm, u8 *buf,
+		      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_lmac_tx_resp *tx_resp;
+	struct iwm_umac_wifi_in_hdr *hdr;
+
+	tx_resp = (struct iwm_lmac_tx_resp *)
+		(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+	hdr = (struct iwm_umac_wifi_in_hdr *)buf;
+
+	IWM_DBG_NTF(iwm, DBG, "REPLY_TX, buf size: %lu\n", buf_size);
+
+	IWM_DBG_NTF(iwm, DBG, "Seqnum: %d\n",
+		    le16_to_cpu(hdr->sw_hdr.cmd.seq_num));
+	IWM_DBG_NTF(iwm, DBG, "\tFrame cnt: %d\n", tx_resp->frame_cnt);
+	IWM_DBG_NTF(iwm, DBG, "\tRetry cnt: %d\n",
+		    le16_to_cpu(tx_resp->retry_cnt));
+	IWM_DBG_NTF(iwm, DBG, "\tSeq ctl: %d\n", le16_to_cpu(tx_resp->seq_ctl));
+	IWM_DBG_NTF(iwm, DBG, "\tByte cnt: %d\n",
+		    le16_to_cpu(tx_resp->byte_cnt));
+	IWM_DBG_NTF(iwm, DBG, "\tStatus: 0x%x\n", le32_to_cpu(tx_resp->status));
+
+	return 0;
+}
+
+
+static int iwm_ntf_calib_res(struct iwm_priv *iwm, u8 *buf,
+			     unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	u8 opcode;
+	u8 *calib_buf;
+	struct iwm_lmac_calib_hdr *hdr = (struct iwm_lmac_calib_hdr *)
+				(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+
+	opcode = hdr->opcode;
+
+	BUG_ON(opcode >= CALIBRATION_CMD_NUM ||
+	       opcode < PHY_CALIBRATE_OPCODES_NUM);
+
+	IWM_DBG_NTF(iwm, DBG, "Store calibration result for opcode: %d\n",
+		    opcode);
+
+	buf_size -= sizeof(struct iwm_umac_wifi_in_hdr);
+	calib_buf = iwm->calib_res[opcode].buf;
+
+	if (!calib_buf || (iwm->calib_res[opcode].size < buf_size)) {
+		kfree(calib_buf);
+		calib_buf = kzalloc(buf_size, GFP_KERNEL);
+		if (!calib_buf) {
+			IWM_ERR(iwm, "Memory allocation failed: calib_res\n");
+			return -ENOMEM;
+		}
+		iwm->calib_res[opcode].buf = calib_buf;
+		iwm->calib_res[opcode].size = buf_size;
+	}
+
+	memcpy(calib_buf, hdr, buf_size);
+	set_bit(opcode - PHY_CALIBRATE_OPCODES_NUM, &iwm->calib_done_map);
+
+	return 0;
+}
+
+static int iwm_ntf_calib_complete(struct iwm_priv *iwm, u8 *buf,
+				  unsigned long buf_size,
+				  struct iwm_wifi_cmd *cmd)
+{
+	IWM_DBG_NTF(iwm, DBG, "Calibration completed\n");
+
+	return 0;
+}
+
+static int iwm_ntf_calib_cfg(struct iwm_priv *iwm, u8 *buf,
+			     unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_lmac_cal_cfg_resp *cal_resp;
+
+	cal_resp = (struct iwm_lmac_cal_cfg_resp *)
+			(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+
+	IWM_DBG_NTF(iwm, DBG, "Calibration CFG command status: %d\n",
+		    le32_to_cpu(cal_resp->status));
+
+	return 0;
+}
+
+static int iwm_ntf_wifi_status(struct iwm_priv *iwm, u8 *buf,
+			       unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_wifi_status *status =
+		(struct iwm_umac_notif_wifi_status *)buf;
+
+	iwm->core_enabled |= le16_to_cpu(status->status);
+
+	return 0;
+}
+
+static struct iwm_rx_ticket_node *
+iwm_rx_ticket_node_alloc(struct iwm_priv *iwm, struct iwm_rx_ticket *ticket)
+{
+	struct iwm_rx_ticket_node *ticket_node;
+
+	ticket_node = kzalloc(sizeof(struct iwm_rx_ticket_node), GFP_KERNEL);
+	if (!ticket_node) {
+		IWM_ERR(iwm, "Couldn't allocate ticket node\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ticket_node->ticket = kzalloc(sizeof(struct iwm_rx_ticket), GFP_KERNEL);
+	if (!ticket_node->ticket) {
+		IWM_ERR(iwm, "Couldn't allocate RX ticket\n");
+		kfree(ticket_node);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	memcpy(ticket_node->ticket, ticket, sizeof(struct iwm_rx_ticket));
+	INIT_LIST_HEAD(&ticket_node->node);
+
+	return ticket_node;
+}
+
+static void iwm_rx_ticket_node_free(struct iwm_rx_ticket_node *ticket_node)
+{
+	kfree(ticket_node->ticket);
+	kfree(ticket_node);
+}
+
+static struct iwm_rx_packet *iwm_rx_packet_get(struct iwm_priv *iwm, u16 id)
+{
+	u8 id_hash = IWM_RX_ID_GET_HASH(id);
+	struct list_head *packet_list;
+	struct iwm_rx_packet *packet, *next;
+
+	packet_list = &iwm->rx_packets[id_hash];
+
+	list_for_each_entry_safe(packet, next, packet_list, node)
+		if (packet->id == id)
+			return packet;
+
+	return NULL;
+}
+
+static struct iwm_rx_packet *iwm_rx_packet_alloc(struct iwm_priv *iwm, u8 *buf,
+						 u32 size, u16 id)
+{
+	struct iwm_rx_packet *packet;
+
+	packet = kzalloc(sizeof(struct iwm_rx_packet), GFP_KERNEL);
+	if (!packet) {
+		IWM_ERR(iwm, "Couldn't allocate packet\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	packet->skb = dev_alloc_skb(size);
+	if (!packet->skb) {
+		IWM_ERR(iwm, "Couldn't allocate packet SKB\n");
+		kfree(packet);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	packet->pkt_size = size;
+
+	skb_put(packet->skb, size);
+	memcpy(packet->skb->data, buf, size);
+	INIT_LIST_HEAD(&packet->node);
+	packet->id = id;
+
+	return packet;
+}
+
+void iwm_rx_free(struct iwm_priv *iwm)
+{
+	struct iwm_rx_ticket_node *ticket, *nt;
+	struct iwm_rx_packet *packet, *np;
+	int i;
+
+	list_for_each_entry_safe(ticket, nt, &iwm->rx_tickets, node) {
+		list_del(&ticket->node);
+		iwm_rx_ticket_node_free(ticket);
+	}
+
+	for (i = 0; i < IWM_RX_ID_HASH; i++) {
+		list_for_each_entry_safe(packet, np, &iwm->rx_packets[i],
+					 node) {
+			list_del(&packet->node);
+			kfree_skb(packet->skb);
+			kfree(packet);
+		}
+	}
+}
+
+static int iwm_ntf_rx_ticket(struct iwm_priv *iwm, u8 *buf,
+			     unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_rx_ticket *ntf_rx_ticket =
+		(struct iwm_umac_notif_rx_ticket *)buf;
+	struct iwm_rx_ticket *ticket =
+		(struct iwm_rx_ticket *)ntf_rx_ticket->tickets;
+	int i, schedule_rx = 0;
+
+	for (i = 0; i < ntf_rx_ticket->num_tickets; i++) {
+		struct iwm_rx_ticket_node *ticket_node;
+
+		switch (le16_to_cpu(ticket->action)) {
+		case IWM_RX_TICKET_RELEASE:
+		case IWM_RX_TICKET_DROP:
+			/* We can push the packet to the stack */
+			ticket_node = iwm_rx_ticket_node_alloc(iwm, ticket);
+			if (IS_ERR(ticket_node))
+				return PTR_ERR(ticket_node);
+
+			IWM_DBG_NTF(iwm, DBG, "TICKET RELEASE(%d)\n",
+				    ticket->id);
+			list_add_tail(&ticket_node->node, &iwm->rx_tickets);
+
+			/*
+			 * We received an Rx ticket, most likely there's
+			 * a packet pending for it, it's not worth going
+			 * through the packet hash list to double check.
+			 * Let's just fire the rx worker..
+			 */
+			schedule_rx = 1;
+
+			break;
+
+		default:
+			IWM_ERR(iwm, "Invalid RX ticket action: 0x%x\n",
+				ticket->action);
+		}
+
+		ticket++;
+	}
+
+	if (schedule_rx)
+		queue_work(iwm->rx_wq, &iwm->rx_worker);
+
+	return 0;
+}
+
+static int iwm_ntf_rx_packet(struct iwm_priv *iwm, u8 *buf,
+			     unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_wifi_in_hdr *wifi_hdr;
+	struct iwm_rx_packet *packet;
+	u16 id, buf_offset;
+	u32 packet_size;
+
+	IWM_DBG_NTF(iwm, DBG, "\n");
+
+	wifi_hdr = (struct iwm_umac_wifi_in_hdr *)buf;
+	id = le16_to_cpu(wifi_hdr->sw_hdr.cmd.seq_num);
+	buf_offset = sizeof(struct iwm_umac_wifi_in_hdr);
+	packet_size = buf_size - sizeof(struct iwm_umac_wifi_in_hdr);
+
+	IWM_DBG_NTF(iwm, DBG, "CMD:0x%x, seqnum: %d, packet size: %d\n",
+		    wifi_hdr->sw_hdr.cmd.cmd, id, packet_size);
+	IWM_DBG_RX(iwm, DBG, "Packet id: %d\n", id);
+	IWM_HEXDUMP(iwm, DBG, RX, "PACKET: ", buf + buf_offset, packet_size);
+
+	packet = iwm_rx_packet_alloc(iwm, buf + buf_offset, packet_size, id);
+	if (IS_ERR(packet))
+		return PTR_ERR(packet);
+
+	list_add_tail(&packet->node, &iwm->rx_packets[IWM_RX_ID_GET_HASH(id)]);
+
+	/* We might (unlikely) have received the packet _after_ the ticket */
+	queue_work(iwm->rx_wq, &iwm->rx_worker);
+
+	return 0;
+}
+
+/* MLME handlers */
+static int iwm_mlme_assoc_start(struct iwm_priv *iwm, u8 *buf,
+				unsigned long buf_size,
+				struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_assoc_start *start;
+
+	start = (struct iwm_umac_notif_assoc_start *)buf;
+
+	set_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
+
+	IWM_DBG_MLME(iwm, INFO, "Association with %pM Started, reason: %d\n",
+		     start->bssid, le32_to_cpu(start->roam_reason));
+
+	wake_up_interruptible(&iwm->mlme_queue);
+
+	return 0;
+}
+
+static int iwm_mlme_assoc_complete(struct iwm_priv *iwm, u8 *buf,
+				   unsigned long buf_size,
+				   struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_assoc_complete *complete =
+		(struct iwm_umac_notif_assoc_complete *)buf;
+	union iwreq_data wrqu;
+
+	IWM_DBG_MLME(iwm, INFO, "Association with %pM completed, status: %d\n",
+		     complete->bssid, complete->status);
+
+	memset(&wrqu, 0, sizeof(wrqu));
+
+	clear_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
+
+	switch (le32_to_cpu(complete->status)) {
+	case UMAC_ASSOC_COMPLETE_SUCCESS:
+		set_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
+		memcpy(iwm->bssid, complete->bssid, ETH_ALEN);
+		iwm->channel = complete->channel;
+
+		iwm_link_on(iwm);
+
+		memcpy(wrqu.ap_addr.sa_data, complete->bssid, ETH_ALEN);
+		break;
+	case UMAC_ASSOC_COMPLETE_FAILURE:
+		clear_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
+		memset(iwm->bssid, 0, ETH_ALEN);
+		iwm->channel = 0;
+
+		iwm_link_off(iwm);
+	default:
+		break;
+	}
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS) {
+		cfg80211_ibss_joined(iwm_to_ndev(iwm), iwm->bssid, GFP_KERNEL);
+		return 0;
+	}
+
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(iwm_to_ndev(iwm), SIOCGIWAP, &wrqu, NULL);
+
+	return 0;
+}
+
+static int iwm_mlme_profile_invalidate(struct iwm_priv *iwm, u8 *buf,
+				       unsigned long buf_size,
+				       struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_profile_invalidate *invalid;
+
+	invalid = (struct iwm_umac_notif_profile_invalidate *)buf;
+
+	IWM_DBG_MLME(iwm, INFO, "Profile Invalidated. Reason: %d\n",
+		     le32_to_cpu(invalid->reason));
+
+	clear_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
+	clear_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
+
+	iwm->umac_profile_active = 0;
+	memset(iwm->bssid, 0, ETH_ALEN);
+	iwm->channel = 0;
+
+	iwm_link_off(iwm);
+
+	wake_up_interruptible(&iwm->mlme_queue);
+
+	return 0;
+}
+
+static int iwm_mlme_scan_complete(struct iwm_priv *iwm, u8 *buf,
+				  unsigned long buf_size,
+				  struct iwm_wifi_cmd *cmd)
+{
+	int ret;
+	struct iwm_umac_notif_scan_complete *scan_complete =
+		(struct iwm_umac_notif_scan_complete *)buf;
+	u32 result = le32_to_cpu(scan_complete->result);
+
+	IWM_DBG_MLME(iwm, INFO, "type:0x%x result:0x%x seq:%d\n",
+		     le32_to_cpu(scan_complete->type),
+		     le32_to_cpu(scan_complete->result),
+		     scan_complete->seq_num);
+
+	if (!test_and_clear_bit(IWM_STATUS_SCANNING, &iwm->status)) {
+		IWM_ERR(iwm, "Scan complete while device not scanning\n");
+		return -EIO;
+	}
+	if (!iwm->scan_request)
+		return 0;
+
+	ret = iwm_cfg80211_inform_bss(iwm);
+
+	cfg80211_scan_done(iwm->scan_request,
+			   (result & UMAC_SCAN_RESULT_ABORTED) ? 1 : !!ret);
+	iwm->scan_request = NULL;
+
+	return ret;
+}
+
+static int iwm_mlme_update_sta_table(struct iwm_priv *iwm, u8 *buf,
+				     unsigned long buf_size,
+				     struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_sta_info *umac_sta =
+			(struct iwm_umac_notif_sta_info *)buf;
+	struct iwm_sta_info *sta;
+	int i;
+
+	switch (le32_to_cpu(umac_sta->opcode)) {
+	case UMAC_OPCODE_ADD_MODIFY:
+		sta = &iwm->sta_table[GET_VAL8(umac_sta->sta_id, LMAC_STA_ID)];
+
+		IWM_DBG_MLME(iwm, INFO, "%s STA: ID = %d, Color = %d, "
+			     "addr = %pM, qos = %d\n",
+			     sta->valid ? "Modify" : "Add",
+			     GET_VAL8(umac_sta->sta_id, LMAC_STA_ID),
+			     GET_VAL8(umac_sta->sta_id, LMAC_STA_COLOR),
+			     umac_sta->mac_addr,
+			     umac_sta->flags & UMAC_STA_FLAG_QOS);
+
+		sta->valid = 1;
+		sta->qos = umac_sta->flags & UMAC_STA_FLAG_QOS;
+		sta->color = GET_VAL8(umac_sta->sta_id, LMAC_STA_COLOR);
+		memcpy(sta->addr, umac_sta->mac_addr, ETH_ALEN);
+		break;
+	case UMAC_OPCODE_REMOVE:
+		IWM_DBG_MLME(iwm, INFO, "Remove STA: ID = %d, Color = %d, "
+			     "addr = %pM\n",
+			     GET_VAL8(umac_sta->sta_id, LMAC_STA_ID),
+			     GET_VAL8(umac_sta->sta_id, LMAC_STA_COLOR),
+			     umac_sta->mac_addr);
+
+		sta = &iwm->sta_table[GET_VAL8(umac_sta->sta_id, LMAC_STA_ID)];
+
+		if (!memcmp(sta->addr, umac_sta->mac_addr, ETH_ALEN))
+			sta->valid = 0;
+
+		break;
+	case UMAC_OPCODE_CLEAR_ALL:
+		for (i = 0; i < IWM_STA_TABLE_NUM; i++)
+			iwm->sta_table[i].valid = 0;
+
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf,
+				     unsigned long buf_size,
+				     struct iwm_wifi_cmd *cmd)
+{
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+	struct ieee80211_mgmt *mgmt;
+	struct iwm_umac_notif_bss_info *umac_bss =
+			(struct iwm_umac_notif_bss_info *)buf;
+	struct ieee80211_channel *channel;
+	struct ieee80211_supported_band *band;
+	struct iwm_bss_info *bss, *next;
+	s32 signal;
+	int freq;
+	u16 frame_len = le16_to_cpu(umac_bss->frame_len);
+	size_t bss_len = sizeof(struct iwm_umac_notif_bss_info) + frame_len;
+
+	mgmt = (struct ieee80211_mgmt *)(umac_bss->frame_buf);
+
+	IWM_DBG_MLME(iwm, DBG, "New BSS info entry: %pM\n", mgmt->bssid);
+	IWM_DBG_MLME(iwm, DBG, "\tType: 0x%x\n", le32_to_cpu(umac_bss->type));
+	IWM_DBG_MLME(iwm, DBG, "\tTimestamp: %d\n",
+		     le32_to_cpu(umac_bss->timestamp));
+	IWM_DBG_MLME(iwm, DBG, "\tTable Index: %d\n",
+		     le16_to_cpu(umac_bss->table_idx));
+	IWM_DBG_MLME(iwm, DBG, "\tBand: %d\n", umac_bss->band);
+	IWM_DBG_MLME(iwm, DBG, "\tChannel: %d\n", umac_bss->channel);
+	IWM_DBG_MLME(iwm, DBG, "\tRSSI: %d\n", umac_bss->rssi);
+	IWM_DBG_MLME(iwm, DBG, "\tFrame Length: %d\n", frame_len);
+
+	list_for_each_entry_safe(bss, next, &iwm->bss_list, node)
+		if (bss->bss->table_idx == umac_bss->table_idx)
+			break;
+
+	if (&bss->node != &iwm->bss_list) {
+		/* Remove the old BSS entry, we will add it back later. */
+		list_del(&bss->node);
+		kfree(bss->bss);
+	} else {
+		/* New BSS entry */
+
+		bss = kzalloc(sizeof(struct iwm_bss_info), GFP_KERNEL);
+		if (!bss) {
+			IWM_ERR(iwm, "Couldn't allocate bss_info\n");
+			return -ENOMEM;
+		}
+	}
+
+	bss->bss = kzalloc(bss_len, GFP_KERNEL);
+	if (!bss) {
+		kfree(bss);
+		IWM_ERR(iwm, "Couldn't allocate bss\n");
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&bss->node);
+	memcpy(bss->bss, umac_bss, bss_len);
+
+	if (umac_bss->band == UMAC_BAND_2GHZ)
+		band = wiphy->bands[IEEE80211_BAND_2GHZ];
+	else if (umac_bss->band == UMAC_BAND_5GHZ)
+		band = wiphy->bands[IEEE80211_BAND_5GHZ];
+	else {
+		IWM_ERR(iwm, "Invalid band: %d\n", umac_bss->band);
+		goto err;
+	}
+
+	freq = ieee80211_channel_to_frequency(umac_bss->channel);
+	channel = ieee80211_get_channel(wiphy, freq);
+	signal = umac_bss->rssi * 100;
+
+	bss->cfg_bss = cfg80211_inform_bss_frame(wiphy, channel,
+						 mgmt, frame_len,
+						 signal, GFP_KERNEL);
+	if (!bss->cfg_bss)
+		goto err;
+
+	list_add_tail(&bss->node, &iwm->bss_list);
+
+	return 0;
+ err:
+	kfree(bss->bss);
+	kfree(bss);
+
+	return -EINVAL;
+}
+
+static int iwm_mlme_remove_bss(struct iwm_priv *iwm, u8 *buf,
+			       unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_bss_removed *bss_rm =
+		(struct iwm_umac_notif_bss_removed *)buf;
+	struct iwm_bss_info *bss, *next;
+	u16 table_idx;
+	int i;
+
+	for (i = 0; i < le32_to_cpu(bss_rm->count); i++) {
+		table_idx = (le16_to_cpu(bss_rm->entries[i])
+			     & IWM_BSS_REMOVE_INDEX_MSK);
+		list_for_each_entry_safe(bss, next, &iwm->bss_list, node)
+			if (bss->bss->table_idx == cpu_to_le16(table_idx)) {
+				struct ieee80211_mgmt *mgmt;
+
+				mgmt = (struct ieee80211_mgmt *)
+					(bss->bss->frame_buf);
+				IWM_DBG_MLME(iwm, ERR,
+					     "BSS removed: %pM\n",
+					     mgmt->bssid);
+				list_del(&bss->node);
+				kfree(bss->bss);
+				kfree(bss);
+			}
+	}
+
+	return 0;
+}
+
+static int iwm_mlme_mgt_frame(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_mgt_frame *mgt_frame =
+	(struct iwm_umac_notif_mgt_frame *)buf;
+	struct ieee80211_mgmt *mgt = (struct ieee80211_mgmt *)mgt_frame->frame;
+	u8 *ie;
+	unsigned int event;
+	union iwreq_data wrqu;
+
+	IWM_HEXDUMP(iwm, DBG, MLME, "MGT: ", mgt_frame->frame,
+		    le16_to_cpu(mgt_frame->len));
+
+	if (ieee80211_is_assoc_req(mgt->frame_control)) {
+		ie = mgt->u.assoc_req.variable;;
+		event = IWEVASSOCREQIE;
+	} else if (ieee80211_is_reassoc_req(mgt->frame_control)) {
+		ie = mgt->u.reassoc_req.variable;;
+		event = IWEVASSOCREQIE;
+	} else if (ieee80211_is_assoc_resp(mgt->frame_control)) {
+		ie = mgt->u.assoc_resp.variable;;
+		event = IWEVASSOCRESPIE;
+	} else if (ieee80211_is_reassoc_resp(mgt->frame_control)) {
+		ie = mgt->u.reassoc_resp.variable;;
+		event = IWEVASSOCRESPIE;
+	} else {
+		IWM_ERR(iwm, "Unsupported management frame");
+		return 0;
+	}
+
+	wrqu.data.length = le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+
+	IWM_HEXDUMP(iwm, DBG, MLME, "EVT: ", ie, wrqu.data.length);
+	wireless_send_event(iwm_to_ndev(iwm), event, &wrqu, ie);
+
+	return 0;
+}
+
+static int iwm_ntf_mlme(struct iwm_priv *iwm, u8 *buf,
+			unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_wifi_if *notif =
+		(struct iwm_umac_notif_wifi_if *)buf;
+
+	switch (notif->status) {
+	case WIFI_IF_NTFY_ASSOC_START:
+		return iwm_mlme_assoc_start(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_ASSOC_COMPLETE:
+		return iwm_mlme_assoc_complete(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_PROFILE_INVALIDATE_COMPLETE:
+		return iwm_mlme_profile_invalidate(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_CONNECTION_TERMINATED:
+		IWM_DBG_MLME(iwm, DBG, "Connection terminated\n");
+		break;
+	case WIFI_IF_NTFY_SCAN_COMPLETE:
+		return iwm_mlme_scan_complete(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_STA_TABLE_CHANGE:
+		return iwm_mlme_update_sta_table(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_EXTENDED_IE_REQUIRED:
+		IWM_DBG_MLME(iwm, DBG, "Extended IE required\n");
+		break;
+	case WIFI_IF_NTFY_BSS_TRK_TABLE_CHANGED:
+		return iwm_mlme_update_bss_table(iwm, buf, buf_size, cmd);
+	case WIFI_IF_NTFY_BSS_TRK_ENTRIES_REMOVED:
+		return iwm_mlme_remove_bss(iwm, buf, buf_size, cmd);
+		break;
+	case WIFI_IF_NTFY_MGMT_FRAME:
+		return iwm_mlme_mgt_frame(iwm, buf, buf_size, cmd);
+	case WIFI_DBG_IF_NTFY_SCAN_SUPER_JOB_START:
+	case WIFI_DBG_IF_NTFY_SCAN_SUPER_JOB_COMPLETE:
+	case WIFI_DBG_IF_NTFY_SCAN_CHANNEL_START:
+	case WIFI_DBG_IF_NTFY_SCAN_CHANNEL_RESULT:
+	case WIFI_DBG_IF_NTFY_SCAN_MINI_JOB_START:
+	case WIFI_DBG_IF_NTFY_SCAN_MINI_JOB_COMPLETE:
+	case WIFI_DBG_IF_NTFY_CNCT_ATC_START:
+	case WIFI_DBG_IF_NTFY_COEX_NOTIFICATION:
+	case WIFI_DBG_IF_NTFY_COEX_HANDLE_ENVELOP:
+	case WIFI_DBG_IF_NTFY_COEX_HANDLE_RELEASE_ENVELOP:
+		IWM_DBG_MLME(iwm, DBG, "MLME debug notification: 0x%x\n",
+			     notif->status);
+		break;
+	default:
+		IWM_ERR(iwm, "Unhandled notification: 0x%x\n", notif->status);
+		break;
+	}
+
+	return 0;
+}
+
+#define IWM_STATS_UPDATE_INTERVAL		(2 * HZ)
+
+static int iwm_ntf_statistics(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_stats *stats = (struct iwm_umac_notif_stats *)buf;
+	struct iw_statistics *wstats = &iwm->wstats;
+	u16 max_rate = 0;
+	int i;
+
+	IWM_DBG_MLME(iwm, DBG, "Statistics notification received\n");
+
+	if (test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+		for (i = 0; i < UMAC_NTF_RATE_SAMPLE_NR; i++) {
+			max_rate = max_t(u16, max_rate,
+					 max(le16_to_cpu(stats->tx_rate[i]),
+					     le16_to_cpu(stats->rx_rate[i])));
+		}
+		/* UMAC passes rate info multiplies by 2 */
+		iwm->rate = max_rate >> 1;
+	}
+
+	wstats->status = 0;
+
+	wstats->discard.nwid = le32_to_cpu(stats->rx_drop_other_bssid);
+	wstats->discard.code = le32_to_cpu(stats->rx_drop_decode);
+	wstats->discard.fragment = le32_to_cpu(stats->rx_drop_reassembly);
+	wstats->discard.retries = le32_to_cpu(stats->tx_drop_max_retry);
+
+	wstats->miss.beacon = le32_to_cpu(stats->missed_beacons);
+
+	/* according to cfg80211 */
+	if (stats->rssi_dbm < -110)
+		wstats->qual.qual = 0;
+	else if (stats->rssi_dbm > -40)
+		wstats->qual.qual = 70;
+	else
+		wstats->qual.qual = stats->rssi_dbm + 110;
+
+	wstats->qual.level = stats->rssi_dbm;
+	wstats->qual.noise = stats->noise_dbm;
+	wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
+
+	schedule_delayed_work(&iwm->stats_request, IWM_STATS_UPDATE_INTERVAL);
+
+	mod_timer(&iwm->watchdog, round_jiffies(jiffies + IWM_WATCHDOG_PERIOD));
+
+	return 0;
+}
+
+static int iwm_ntf_eeprom_proxy(struct iwm_priv *iwm, u8 *buf,
+				unsigned long buf_size,
+				struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_cmd_eeprom_proxy *eeprom_proxy =
+		(struct iwm_umac_cmd_eeprom_proxy *)
+		(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+	struct iwm_umac_cmd_eeprom_proxy_hdr *hdr = &eeprom_proxy->hdr;
+	u32 hdr_offset = le32_to_cpu(hdr->offset);
+	u32 hdr_len = le32_to_cpu(hdr->len);
+	u32 hdr_type = le32_to_cpu(hdr->type);
+
+	IWM_DBG_NTF(iwm, DBG, "type: 0x%x, len: %d, offset: 0x%x\n",
+		    hdr_type, hdr_len, hdr_offset);
+
+	if ((hdr_offset + hdr_len) > IWM_EEPROM_LEN)
+		return -EINVAL;
+
+#ifdef CONFIG_IWM_B0_HW_SUPPORT
+	if (hdr_offset == IWM_EEPROM_SKU_CAP_OFF) {
+		if (eeprom_proxy->buf[0] == 0xff)
+			iwm->conf.hw_b0 = 1;
+	}
+#endif
+
+	switch (hdr_type) {
+	case IWM_UMAC_CMD_EEPROM_TYPE_READ:
+		memcpy(iwm->eeprom + hdr_offset, eeprom_proxy->buf, hdr_len);
+		break;
+	case IWM_UMAC_CMD_EEPROM_TYPE_WRITE:
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_ntf_channel_info_list(struct iwm_priv *iwm, u8 *buf,
+				     unsigned long buf_size,
+				     struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_cmd_get_channel_list *ch_list =
+			(struct iwm_umac_cmd_get_channel_list *)
+			(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+	struct ieee80211_supported_band *band;
+	int i;
+
+	band = wiphy->bands[IEEE80211_BAND_2GHZ];
+
+	for (i = 0; i < band->n_channels; i++) {
+		unsigned long ch_mask_0 =
+			le32_to_cpu(ch_list->ch[0].channels_mask);
+		unsigned long ch_mask_2 =
+			le32_to_cpu(ch_list->ch[2].channels_mask);
+
+		if (!test_bit(i, &ch_mask_0))
+			band->channels[i].flags |= IEEE80211_CHAN_DISABLED;
+
+		if (!test_bit(i, &ch_mask_2))
+			band->channels[i].flags |= IEEE80211_CHAN_NO_IBSS;
+	}
+
+	band = wiphy->bands[IEEE80211_BAND_5GHZ];
+
+	for (i = 0; i < min(band->n_channels, 32); i++) {
+		unsigned long ch_mask_1 =
+			le32_to_cpu(ch_list->ch[1].channels_mask);
+		unsigned long ch_mask_3 =
+			le32_to_cpu(ch_list->ch[3].channels_mask);
+
+		if (!test_bit(i, &ch_mask_1))
+			band->channels[i].flags |= IEEE80211_CHAN_DISABLED;
+
+		if (!test_bit(i, &ch_mask_3))
+			band->channels[i].flags |= IEEE80211_CHAN_NO_IBSS;
+	}
+
+	return 0;
+}
+
+static int iwm_ntf_wifi_if_wrapper(struct iwm_priv *iwm, u8 *buf,
+				   unsigned long buf_size,
+				   struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_wifi_if *hdr =
+			(struct iwm_umac_wifi_if *)cmd->buf.payload;
+
+	IWM_DBG_NTF(iwm, DBG, "WIFI_IF_WRAPPER cmd is delivered to UMAC: "
+		    "oid is %d\n", hdr->oid);
+
+	switch (hdr->oid) {
+	case UMAC_WIFI_IF_CMD_SET_PROFILE:
+		iwm->umac_profile_active = 1;
+		wake_up_interruptible(&iwm->mlme_queue);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int iwm_ntf_card_state(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_lmac_card_state *state = (struct iwm_lmac_card_state *)
+				(buf + sizeof(struct iwm_umac_wifi_in_hdr));
+	u32 flags = le32_to_cpu(state->flags);
+
+	IWM_INFO(iwm, "HW RF Kill %s, CT Kill %s\n",
+		 flags & IWM_CARD_STATE_HW_DISABLED ? "ON" : "OFF",
+		 flags & IWM_CARD_STATE_CTKILL_DISABLED ? "ON" : "OFF");
+
+	if (flags & IWM_CARD_STATE_HW_DISABLED)
+		set_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+	else
+		clear_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+
+	return 0;
+}
+
+static int iwm_rx_handle_wifi(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size)
+{
+	struct iwm_umac_wifi_in_hdr *wifi_hdr;
+	struct iwm_wifi_cmd *cmd;
+	u8 source, cmd_id;
+	u16 seq_num;
+	u32 count;
+	u8 resp;
+
+	wifi_hdr = (struct iwm_umac_wifi_in_hdr *)buf;
+	cmd_id = wifi_hdr->sw_hdr.cmd.cmd;
+
+	source = GET_VAL32(wifi_hdr->hw_hdr.cmd, UMAC_HDI_IN_CMD_SOURCE);
+	if (source >= IWM_SRC_NUM) {
+		IWM_CRIT(iwm, "invalid source %d\n", source);
+		return -EINVAL;
+	}
+
+	count = (GET_VAL32(wifi_hdr->sw_hdr.meta_data, UMAC_FW_CMD_BYTE_COUNT));
+	count += sizeof(struct iwm_umac_wifi_in_hdr) -
+		 sizeof(struct iwm_dev_cmd_hdr);
+	if (count > buf_size) {
+		IWM_CRIT(iwm, "count %d, buf size:%ld\n", count, buf_size);
+		return -EINVAL;
+	}
+
+	resp = GET_VAL32(wifi_hdr->sw_hdr.meta_data, UMAC_FW_CMD_STATUS);
+
+	seq_num = le16_to_cpu(wifi_hdr->sw_hdr.cmd.seq_num);
+
+	IWM_DBG_RX(iwm, DBG, "CMD:0x%x, source: 0x%x, seqnum: %d\n",
+		   cmd_id, source, seq_num);
+
+	/*
+	 * If this is a response to a previously sent command, there must
+	 * be a pending command for this sequence number.
+	 */
+	cmd = iwm_get_pending_wifi_cmd(iwm, seq_num);
+
+	/* Notify the caller only for sync commands. */
+	switch (source) {
+	case UMAC_HDI_IN_SOURCE_FHRX:
+		if (iwm->lmac_handlers[cmd_id] &&
+		    test_bit(cmd_id, &iwm->lmac_handler_map[0]))
+			return iwm_notif_send(iwm, cmd, cmd_id, source,
+					      buf, count);
+		break;
+	case UMAC_HDI_IN_SOURCE_FW:
+		if (iwm->umac_handlers[cmd_id] &&
+		    test_bit(cmd_id, &iwm->umac_handler_map[0]))
+			return iwm_notif_send(iwm, cmd, cmd_id, source,
+					      buf, count);
+		break;
+	case UMAC_HDI_IN_SOURCE_UDMA:
+		break;
+	}
+
+	return iwm_rx_handle_resp(iwm, buf, count, cmd);
+}
+
+int iwm_rx_handle_resp(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size,
+		       struct iwm_wifi_cmd *cmd)
+{
+	u8 source, cmd_id;
+	struct iwm_umac_wifi_in_hdr *wifi_hdr;
+	int ret = 0;
+
+	wifi_hdr = (struct iwm_umac_wifi_in_hdr *)buf;
+	cmd_id = wifi_hdr->sw_hdr.cmd.cmd;
+
+	source = GET_VAL32(wifi_hdr->hw_hdr.cmd, UMAC_HDI_IN_CMD_SOURCE);
+
+	IWM_DBG_RX(iwm, DBG, "CMD:0x%x, source: 0x%x\n", cmd_id, source);
+
+	switch (source) {
+	case UMAC_HDI_IN_SOURCE_FHRX:
+		if (iwm->lmac_handlers[cmd_id])
+			ret = iwm->lmac_handlers[cmd_id]
+					(iwm, buf, buf_size, cmd);
+		break;
+	case UMAC_HDI_IN_SOURCE_FW:
+		if (iwm->umac_handlers[cmd_id])
+			ret = iwm->umac_handlers[cmd_id]
+					(iwm, buf, buf_size, cmd);
+		break;
+	case UMAC_HDI_IN_SOURCE_UDMA:
+		ret = -EINVAL;
+		break;
+	}
+
+	kfree(cmd);
+
+	return ret;
+}
+
+static int iwm_rx_handle_nonwifi(struct iwm_priv *iwm, u8 *buf,
+				 unsigned long buf_size)
+{
+	u8 seq_num;
+	struct iwm_udma_in_hdr *hdr = (struct iwm_udma_in_hdr *)buf;
+	struct iwm_nonwifi_cmd *cmd, *next;
+
+	seq_num = GET_VAL32(hdr->cmd, UDMA_HDI_IN_CMD_NON_WIFI_HW_SEQ_NUM);
+
+	/*
+	 * We received a non wifi answer.
+	 * Let's check if there's a pending command for it, and if so
+	 * replace the command payload with the buffer, and then wake the
+	 * callers up.
+	 * That means we only support synchronised non wifi command response
+	 * schemes.
+	 */
+	list_for_each_entry_safe(cmd, next, &iwm->nonwifi_pending_cmd, pending)
+		if (cmd->seq_num == seq_num) {
+			cmd->resp_received = 1;
+			cmd->buf.len = buf_size;
+			memcpy(cmd->buf.hdr, buf, buf_size);
+			wake_up_interruptible(&iwm->nonwifi_queue);
+		}
+
+	return 0;
+}
+
+static int iwm_rx_handle_umac(struct iwm_priv *iwm, u8 *buf,
+			      unsigned long buf_size)
+{
+	int ret = 0;
+	u8 op_code;
+	unsigned long buf_offset = 0;
+	struct iwm_udma_in_hdr *hdr;
+
+	/*
+	 * To allow for a more efficient bus usage, UMAC
+	 * messages are encapsulated into UDMA ones. This
+	 * way we can have several UMAC messages in one bus
+	 * transfer.
+	 * A UDMA frame size is always aligned on 16 bytes,
+	 * and a UDMA frame must not start with a UMAC_PAD_TERMINAL
+	 * word. This is how we parse a bus frame into several
+	 * UDMA ones.
+	 */
+	while (buf_offset < buf_size) {
+
+		hdr = (struct iwm_udma_in_hdr *)(buf + buf_offset);
+
+		if (iwm_rx_check_udma_hdr(hdr) < 0) {
+			IWM_DBG_RX(iwm, DBG, "End of frame\n");
+			break;
+		}
+
+		op_code = GET_VAL32(hdr->cmd, UMAC_HDI_IN_CMD_OPCODE);
+
+		IWM_DBG_RX(iwm, DBG, "Op code: 0x%x\n", op_code);
+
+		if (op_code == UMAC_HDI_IN_OPCODE_WIFI) {
+			ret |= iwm_rx_handle_wifi(iwm, buf + buf_offset,
+						  buf_size - buf_offset);
+		} else if (op_code < UMAC_HDI_IN_OPCODE_NONWIFI_MAX) {
+			if (GET_VAL32(hdr->cmd,
+				      UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG) !=
+			    UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG) {
+				IWM_ERR(iwm, "Incorrect hw signature\n");
+				return -EINVAL;
+			}
+			ret |= iwm_rx_handle_nonwifi(iwm, buf + buf_offset,
+						     buf_size - buf_offset);
+		} else {
+			IWM_ERR(iwm, "Invalid RX opcode: 0x%x\n", op_code);
+			ret |= -EINVAL;
+		}
+
+		buf_offset += iwm_rx_resp_size(hdr);
+	}
+
+	return ret;
+}
+
+int iwm_rx_handle(struct iwm_priv *iwm, u8 *buf, unsigned long buf_size)
+{
+	struct iwm_udma_in_hdr *hdr;
+
+	hdr = (struct iwm_udma_in_hdr *)buf;
+
+	switch (le32_to_cpu(hdr->cmd)) {
+	case UMAC_REBOOT_BARKER:
+		return iwm_notif_send(iwm, NULL, IWM_BARKER_REBOOT_NOTIFICATION,
+				      IWM_SRC_UDMA, buf, buf_size);
+	case UMAC_ACK_BARKER:
+		return iwm_notif_send(iwm, NULL, IWM_ACK_BARKER_NOTIFICATION,
+				      IWM_SRC_UDMA, NULL, 0);
+	default:
+		IWM_DBG_RX(iwm, DBG, "Received cmd: 0x%x\n", hdr->cmd);
+		return iwm_rx_handle_umac(iwm, buf, buf_size);
+	}
+
+	return 0;
+}
+
+static const iwm_handler iwm_umac_handlers[] =
+{
+	[UMAC_NOTIFY_OPCODE_ERROR]		= iwm_ntf_error,
+	[UMAC_NOTIFY_OPCODE_ALIVE]		= iwm_ntf_umac_alive,
+	[UMAC_NOTIFY_OPCODE_INIT_COMPLETE]	= iwm_ntf_init_complete,
+	[UMAC_NOTIFY_OPCODE_WIFI_CORE_STATUS]	= iwm_ntf_wifi_status,
+	[UMAC_NOTIFY_OPCODE_WIFI_IF_WRAPPER]	= iwm_ntf_mlme,
+	[UMAC_NOTIFY_OPCODE_PAGE_DEALLOC]	= iwm_ntf_tx_credit_update,
+	[UMAC_NOTIFY_OPCODE_RX_TICKET]		= iwm_ntf_rx_ticket,
+	[UMAC_CMD_OPCODE_RESET]			= iwm_ntf_umac_reset,
+	[UMAC_NOTIFY_OPCODE_STATS]		= iwm_ntf_statistics,
+	[UMAC_CMD_OPCODE_EEPROM_PROXY]		= iwm_ntf_eeprom_proxy,
+	[UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST]	= iwm_ntf_channel_info_list,
+	[REPLY_RX_MPDU_CMD]			= iwm_ntf_rx_packet,
+	[UMAC_CMD_OPCODE_WIFI_IF_WRAPPER]	= iwm_ntf_wifi_if_wrapper,
+};
+
+static const iwm_handler iwm_lmac_handlers[] =
+{
+	[REPLY_TX]				= iwm_ntf_tx,
+	[REPLY_ALIVE]				= iwm_ntf_lmac_version,
+	[CALIBRATION_RES_NOTIFICATION]		= iwm_ntf_calib_res,
+	[CALIBRATION_COMPLETE_NOTIFICATION]	= iwm_ntf_calib_complete,
+	[CALIBRATION_CFG_CMD]			= iwm_ntf_calib_cfg,
+	[REPLY_RX_MPDU_CMD]			= iwm_ntf_rx_packet,
+	[CARD_STATE_NOTIFICATION]		= iwm_ntf_card_state,
+};
+
+void iwm_rx_setup_handlers(struct iwm_priv *iwm)
+{
+	iwm->umac_handlers = (iwm_handler *) iwm_umac_handlers;
+	iwm->lmac_handlers = (iwm_handler *) iwm_lmac_handlers;
+}
+
+static void iwm_remove_iv(struct sk_buff *skb, u32 hdr_total_len)
+{
+	struct ieee80211_hdr *hdr;
+	unsigned int hdr_len;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+
+	if (!ieee80211_has_protected(hdr->frame_control))
+		return;
+
+	hdr_len = ieee80211_hdrlen(hdr->frame_control);
+	if (hdr_total_len <= hdr_len)
+		return;
+
+	memmove(skb->data + (hdr_total_len - hdr_len), skb->data, hdr_len);
+	skb_pull(skb, (hdr_total_len - hdr_len));
+}
+
+static void iwm_rx_adjust_packet(struct iwm_priv *iwm,
+				 struct iwm_rx_packet *packet,
+				 struct iwm_rx_ticket_node *ticket_node)
+{
+	u32 payload_offset = 0, payload_len;
+	struct iwm_rx_ticket *ticket = ticket_node->ticket;
+	struct iwm_rx_mpdu_hdr *mpdu_hdr;
+	struct ieee80211_hdr *hdr;
+
+	mpdu_hdr = (struct iwm_rx_mpdu_hdr *)packet->skb->data;
+	payload_offset += sizeof(struct iwm_rx_mpdu_hdr);
+	/* Padding is 0 or 2 bytes */
+	payload_len = le16_to_cpu(mpdu_hdr->len) +
+		(le16_to_cpu(ticket->flags) & IWM_RX_TICKET_PAD_SIZE_MSK);
+	payload_len -= ticket->tail_len;
+
+	IWM_DBG_RX(iwm, DBG, "Packet adjusted, len:%d, offset:%d, "
+		   "ticket offset:%d ticket tail len:%d\n",
+		   payload_len, payload_offset, ticket->payload_offset,
+		   ticket->tail_len);
+
+	IWM_HEXDUMP(iwm, DBG, RX, "RAW: ", packet->skb->data, packet->skb->len);
+
+	skb_pull(packet->skb, payload_offset);
+	skb_trim(packet->skb, payload_len);
+
+	iwm_remove_iv(packet->skb, ticket->payload_offset);
+
+	hdr = (struct ieee80211_hdr *) packet->skb->data;
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		/* UMAC handed QOS_DATA frame with 2 padding bytes appended
+		 * to the qos_ctl field in IEEE 802.11 headers. */
+		memmove(packet->skb->data + IEEE80211_QOS_CTL_LEN + 2,
+			packet->skb->data,
+			ieee80211_hdrlen(hdr->frame_control) -
+			IEEE80211_QOS_CTL_LEN);
+		hdr = (struct ieee80211_hdr *) skb_pull(packet->skb,
+				IEEE80211_QOS_CTL_LEN + 2);
+		hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+	}
+
+	IWM_HEXDUMP(iwm, DBG, RX, "ADJUSTED: ",
+		    packet->skb->data, packet->skb->len);
+}
+
+static void classify8023(struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		/* frame has qos control */
+		skb->priority = *qc & IEEE80211_QOS_CTL_TID_MASK;
+	} else {
+		skb->priority = 0;
+	}
+}
+
+static void iwm_rx_process_packet(struct iwm_priv *iwm,
+				  struct iwm_rx_packet *packet,
+				  struct iwm_rx_ticket_node *ticket_node)
+{
+	int ret;
+	struct sk_buff *skb = packet->skb;
+	struct wireless_dev *wdev = iwm_to_wdev(iwm);
+	struct net_device *ndev = iwm_to_ndev(iwm);
+
+	IWM_DBG_RX(iwm, DBG, "Processing packet ID %d\n", packet->id);
+
+	switch (le16_to_cpu(ticket_node->ticket->action)) {
+	case IWM_RX_TICKET_RELEASE:
+		IWM_DBG_RX(iwm, DBG, "RELEASE packet\n");
+		classify8023(skb);
+		iwm_rx_adjust_packet(iwm, packet, ticket_node);
+		ret = ieee80211_data_to_8023(skb, ndev->dev_addr, wdev->iftype);
+		if (ret < 0) {
+			IWM_DBG_RX(iwm, DBG, "Couldn't convert 802.11 header - "
+				   "%d\n", ret);
+			break;
+		}
+
+		IWM_HEXDUMP(iwm, DBG, RX, "802.3: ", skb->data, skb->len);
+
+		skb->dev = iwm_to_ndev(iwm);
+		skb->protocol = eth_type_trans(skb, ndev);
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		memset(skb->cb, 0, sizeof(skb->cb));
+
+		ndev->stats.rx_packets++;
+		ndev->stats.rx_bytes += skb->len;
+
+		if (netif_rx(skb) == NET_RX_DROP) {
+			IWM_ERR(iwm, "Packet dropped\n");
+			ndev->stats.rx_dropped++;
+		}
+		break;
+	case IWM_RX_TICKET_DROP:
+		IWM_DBG_RX(iwm, DBG, "DROP packet\n");
+		kfree_skb(packet->skb);
+		break;
+	default:
+		IWM_ERR(iwm, "Unknow ticket action: %d\n",
+			le16_to_cpu(ticket_node->ticket->action));
+		kfree_skb(packet->skb);
+	}
+
+	kfree(packet);
+	iwm_rx_ticket_node_free(ticket_node);
+}
+
+/*
+ * Rx data processing:
+ *
+ * We're receiving Rx packet from the LMAC, and Rx ticket from
+ * the UMAC.
+ * To forward a target data packet upstream (i.e. to the
+ * kernel network stack), we must have received an Rx ticket
+ * that tells us we're allowed to release this packet (ticket
+ * action is IWM_RX_TICKET_RELEASE). The Rx ticket also indicates,
+ * among other things, where valid data actually starts in the Rx
+ * packet.
+ */
+void iwm_rx_worker(struct work_struct *work)
+{
+	struct iwm_priv *iwm;
+	struct iwm_rx_ticket_node *ticket, *next;
+
+	iwm = container_of(work, struct iwm_priv, rx_worker);
+
+	/*
+	 * We go through the tickets list and if there is a pending
+	 * packet for it, we push it upstream.
+	 * We stop whenever a ticket is missing its packet, as we're
+	 * supposed to send the packets in order.
+	 */
+	list_for_each_entry_safe(ticket, next, &iwm->rx_tickets, node) {
+		struct iwm_rx_packet *packet =
+			iwm_rx_packet_get(iwm, le16_to_cpu(ticket->ticket->id));
+
+		if (!packet) {
+			IWM_DBG_RX(iwm, DBG, "Skip rx_work: Wait for ticket %d "
+				   "to be handled first\n",
+				   le16_to_cpu(ticket->ticket->id));
+			return;
+		}
+
+		list_del(&ticket->node);
+		list_del(&packet->node);
+		iwm_rx_process_packet(iwm, packet, ticket);
+	}
+}
+
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.h b/drivers/net/wireless/iwmc3200wifi/rx.h
new file mode 100644
index 00000000000..da0db91cee5
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/rx.h
@@ -0,0 +1,60 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_RX_H__
+#define __IWM_RX_H__
+
+#include <linux/skbuff.h>
+
+#include "umac.h"
+
+struct iwm_rx_ticket_node {
+	struct list_head node;
+	struct iwm_rx_ticket *ticket;
+};
+
+struct iwm_rx_packet {
+	struct list_head node;
+	u16 id;
+	struct sk_buff *skb;
+	unsigned long pkt_size;
+};
+
+void iwm_rx_worker(struct work_struct *work);
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
new file mode 100644
index 00000000000..b54da677b37
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
@@ -0,0 +1,516 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+/*
+ * This is the SDIO bus specific hooks for iwm.
+ * It also is the module's entry point.
+ *
+ * Interesting code paths:
+ * iwm_sdio_probe() (Called by an SDIO bus scan)
+ *  -> iwm_if_alloc() (netdev.c)
+ *      -> iwm_wdev_alloc() (cfg80211.c, allocates and register our wiphy)
+ *          -> wiphy_new()
+ *          -> wiphy_register()
+ *      -> alloc_netdev_mq()
+ *      -> register_netdev()
+ *
+ * iwm_sdio_remove()
+ *  -> iwm_if_free() (netdev.c)
+ *      -> unregister_netdev()
+ *      -> iwm_wdev_free() (cfg80211.c)
+ *          -> wiphy_unregister()
+ *          -> wiphy_free()
+ *
+ * iwm_sdio_isr() (called in process context from the SDIO core code)
+ *  -> queue_work(.., isr_worker)
+ *      -- [async] --> iwm_sdio_isr_worker()
+ *                      -> iwm_rx_handle()
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "iwm.h"
+#include "debug.h"
+#include "bus.h"
+#include "sdio.h"
+
+static void iwm_sdio_isr_worker(struct work_struct *work)
+{
+	struct iwm_sdio_priv *hw;
+	struct iwm_priv *iwm;
+	struct iwm_rx_info *rx_info;
+	struct sk_buff *skb;
+	u8 *rx_buf;
+	unsigned long rx_size;
+
+	hw = container_of(work, struct iwm_sdio_priv, isr_worker);
+	iwm = hw_to_iwm(hw);
+
+	while (!skb_queue_empty(&iwm->rx_list)) {
+		skb = skb_dequeue(&iwm->rx_list);
+		rx_info = skb_to_rx_info(skb);
+		rx_size = rx_info->rx_size;
+		rx_buf = skb->data;
+
+		IWM_HEXDUMP(iwm, DBG, SDIO, "RX: ", rx_buf, rx_size);
+		if (iwm_rx_handle(iwm, rx_buf, rx_size) < 0)
+			IWM_WARN(iwm, "RX error\n");
+
+		kfree_skb(skb);
+	}
+}
+
+static void iwm_sdio_isr(struct sdio_func *func)
+{
+	struct iwm_priv *iwm;
+	struct iwm_sdio_priv *hw;
+	struct iwm_rx_info *rx_info;
+	struct sk_buff *skb;
+	unsigned long buf_size, read_size;
+	int ret;
+	u8 val;
+
+	hw = sdio_get_drvdata(func);
+	iwm = hw_to_iwm(hw);
+
+	buf_size = hw->blk_size;
+
+	/* We're checking the status */
+	val = sdio_readb(func, IWM_SDIO_INTR_STATUS_ADDR, &ret);
+	if (val == 0 || ret < 0) {
+		IWM_ERR(iwm, "Wrong INTR_STATUS\n");
+		return;
+	}
+
+	/* See if we have free buffers */
+	if (skb_queue_len(&iwm->rx_list) > IWM_RX_LIST_SIZE) {
+		IWM_ERR(iwm, "No buffer for more Rx frames\n");
+		return;
+	}
+
+	/* We first read the transaction size */
+	read_size = sdio_readb(func, IWM_SDIO_INTR_GET_SIZE_ADDR + 1, &ret);
+	read_size = read_size << 8;
+
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't read the xfer size\n");
+		return;
+	}
+
+	/* We need to clear the INT register */
+	sdio_writeb(func, 1, IWM_SDIO_INTR_CLEAR_ADDR, &ret);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't clear the INT register\n");
+		return;
+	}
+
+	while (buf_size < read_size)
+		buf_size <<= 1;
+
+	skb = dev_alloc_skb(buf_size);
+	if (!skb) {
+		IWM_ERR(iwm, "Couldn't alloc RX skb\n");
+		return;
+	}
+	rx_info = skb_to_rx_info(skb);
+	rx_info->rx_size = read_size;
+	rx_info->rx_buf_size = buf_size;
+
+	/* Now we can read the actual buffer */
+	ret = sdio_memcpy_fromio(func, skb_put(skb, read_size),
+				 IWM_SDIO_DATA_ADDR, read_size);
+
+	/* The skb is put on a driver's specific Rx SKB list */
+	skb_queue_tail(&iwm->rx_list, skb);
+
+	/* We can now schedule the actual worker */
+	queue_work(hw->isr_wq, &hw->isr_worker);
+}
+
+static void iwm_sdio_rx_free(struct iwm_sdio_priv *hw)
+{
+	struct iwm_priv *iwm = hw_to_iwm(hw);
+
+	flush_workqueue(hw->isr_wq);
+
+	skb_queue_purge(&iwm->rx_list);
+}
+
+/* Bus ops */
+static int if_sdio_enable(struct iwm_priv *iwm)
+{
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+	int ret;
+
+	sdio_claim_host(hw->func);
+
+	ret = sdio_enable_func(hw->func);
+	if (ret) {
+		IWM_ERR(iwm, "Couldn't enable the device: is TOP driver "
+			"loaded and functional?\n");
+		goto release_host;
+	}
+
+	iwm_reset(iwm);
+
+	ret = sdio_claim_irq(hw->func, iwm_sdio_isr);
+	if (ret) {
+		IWM_ERR(iwm, "Failed to claim irq: %d\n", ret);
+		goto release_host;
+	}
+
+	sdio_writeb(hw->func, 1, IWM_SDIO_INTR_ENABLE_ADDR, &ret);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't enable INTR: %d\n", ret);
+		goto release_irq;
+	}
+
+	sdio_release_host(hw->func);
+
+	IWM_DBG_SDIO(iwm, INFO, "IWM SDIO enable\n");
+
+	return 0;
+
+ release_irq:
+	sdio_release_irq(hw->func);
+ release_host:
+	sdio_release_host(hw->func);
+
+	return ret;
+}
+
+static int if_sdio_disable(struct iwm_priv *iwm)
+{
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+	int ret;
+
+	iwm_reset(iwm);
+
+	sdio_claim_host(hw->func);
+	sdio_writeb(hw->func, 0, IWM_SDIO_INTR_ENABLE_ADDR, &ret);
+	if (ret < 0)
+		IWM_WARN(iwm, "Couldn't disable INTR: %d\n", ret);
+
+	sdio_release_irq(hw->func);
+	sdio_disable_func(hw->func);
+	sdio_release_host(hw->func);
+
+	iwm_sdio_rx_free(hw);
+
+	IWM_DBG_SDIO(iwm, INFO, "IWM SDIO disable\n");
+
+	return 0;
+}
+
+static int if_sdio_send_chunk(struct iwm_priv *iwm, u8 *buf, int count)
+{
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+	int aligned_count = ALIGN(count, hw->blk_size);
+	int ret;
+
+	if ((unsigned long)buf & 0x3) {
+		IWM_ERR(iwm, "buf <%p> is not dword aligned\n", buf);
+		/* TODO: Is this a hardware limitation? use get_unligned */
+		return -EINVAL;
+	}
+
+	sdio_claim_host(hw->func);
+	ret = sdio_memcpy_toio(hw->func, IWM_SDIO_DATA_ADDR, buf,
+			       aligned_count);
+	sdio_release_host(hw->func);
+
+	return ret;
+}
+
+/* debugfs hooks */
+static int iwm_debugfs_sdio_open(struct inode *inode, struct file *filp)
+{
+	filp->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t iwm_debugfs_sdio_read(struct file *filp, char __user *buffer,
+				     size_t count, loff_t *ppos)
+{
+	struct iwm_priv *iwm = filp->private_data;
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+	char *buf;
+	u8 cccr;
+	int buf_len = 4096, ret;
+	size_t len = 0;
+
+	if (*ppos != 0)
+		return 0;
+	if (count < sizeof(buf))
+		return -ENOSPC;
+
+	buf = kzalloc(buf_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	sdio_claim_host(hw->func);
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_IOEx, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_IOEx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_IOEx:  0x%x\n", cccr);
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_IORx, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_IORx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_IORx:  0x%x\n", cccr);
+
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_IENx, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_IENx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_IENx:  0x%x\n", cccr);
+
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_INTx, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_INTx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_INTx:  0x%x\n", cccr);
+
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_ABORT, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_ABORTx\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_ABORT: 0x%x\n", cccr);
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_IF, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_IF\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_IF:    0x%x\n", cccr);
+
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_CAPS, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_CAPS\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_CAPS:  0x%x\n", cccr);
+
+	cccr =  sdio_f0_readb(hw->func, SDIO_CCCR_CIS, &ret);
+	if (ret) {
+		IWM_ERR(iwm, "Could not read SDIO_CCCR_CIS\n");
+		goto err;
+	}
+	len += snprintf(buf + len, buf_len - len, "CCCR_CIS:   0x%x\n", cccr);
+
+	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+err:
+	sdio_release_host(hw->func);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations iwm_debugfs_sdio_fops = {
+	.owner =	THIS_MODULE,
+	.open =		iwm_debugfs_sdio_open,
+	.read =		iwm_debugfs_sdio_read,
+};
+
+static int if_sdio_debugfs_init(struct iwm_priv *iwm, struct dentry *parent_dir)
+{
+	int result;
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+
+	hw->cccr_dentry = debugfs_create_file("cccr", 0200,
+					      parent_dir, iwm,
+					      &iwm_debugfs_sdio_fops);
+	result = PTR_ERR(hw->cccr_dentry);
+	if (IS_ERR(hw->cccr_dentry) && (result != -ENODEV)) {
+		IWM_ERR(iwm, "Couldn't create CCCR entry: %d\n", result);
+		return result;
+	}
+
+	return 0;
+}
+
+static void if_sdio_debugfs_exit(struct iwm_priv *iwm)
+{
+	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
+
+	debugfs_remove(hw->cccr_dentry);
+}
+
+static struct iwm_if_ops if_sdio_ops = {
+	.enable = if_sdio_enable,
+	.disable = if_sdio_disable,
+	.send_chunk = if_sdio_send_chunk,
+	.debugfs_init = if_sdio_debugfs_init,
+	.debugfs_exit = if_sdio_debugfs_exit,
+	.umac_name = "iwmc3200wifi-umac-sdio.bin",
+	.calib_lmac_name = "iwmc3200wifi-calib-sdio.bin",
+	.lmac_name = "iwmc3200wifi-lmac-sdio.bin",
+};
+
+static int iwm_sdio_probe(struct sdio_func *func,
+			  const struct sdio_device_id *id)
+{
+	struct iwm_priv *iwm;
+	struct iwm_sdio_priv *hw;
+	struct device *dev = &func->dev;
+	int ret;
+
+	/* check if TOP has already initialized the card */
+	sdio_claim_host(func);
+	ret = sdio_enable_func(func);
+	if (ret) {
+		dev_err(dev, "wait for TOP to enable the device\n");
+		sdio_release_host(func);
+		return ret;
+	}
+
+	ret = sdio_set_block_size(func, IWM_SDIO_BLK_SIZE);
+
+	sdio_disable_func(func);
+	sdio_release_host(func);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to set block size: %d\n", ret);
+		return ret;
+	}
+
+	iwm = iwm_if_alloc(sizeof(struct iwm_sdio_priv), dev, &if_sdio_ops);
+	if (IS_ERR(iwm)) {
+		dev_err(dev, "allocate SDIO interface failed\n");
+		return PTR_ERR(iwm);
+	}
+
+	hw = iwm_private(iwm);
+	hw->iwm = iwm;
+
+	ret = iwm_debugfs_init(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Debugfs registration failed\n");
+		goto if_free;
+	}
+
+	sdio_set_drvdata(func, hw);
+
+	hw->func = func;
+	hw->blk_size = IWM_SDIO_BLK_SIZE;
+
+	hw->isr_wq = create_singlethread_workqueue(KBUILD_MODNAME "_sdio");
+	if (!hw->isr_wq) {
+		ret = -ENOMEM;
+		goto debugfs_exit;
+	}
+
+	INIT_WORK(&hw->isr_worker, iwm_sdio_isr_worker);
+
+	dev_info(dev, "IWM SDIO probe\n");
+
+	return 0;
+
+ debugfs_exit:
+	iwm_debugfs_exit(iwm);
+ if_free:
+	iwm_if_free(iwm);
+	return ret;
+}
+
+static void iwm_sdio_remove(struct sdio_func *func)
+{
+	struct iwm_sdio_priv *hw = sdio_get_drvdata(func);
+	struct iwm_priv *iwm = hw_to_iwm(hw);
+	struct device *dev = &func->dev;
+
+	iwm_debugfs_exit(iwm);
+	iwm_if_free(iwm);
+	destroy_workqueue(hw->isr_wq);
+
+	sdio_set_drvdata(func, NULL);
+
+	dev_info(dev, "IWM SDIO remove\n");
+
+	return;
+}
+
+static const struct sdio_device_id iwm_sdio_ids[] = {
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, SDIO_DEVICE_ID_IWM) },
+	{ /* end: all zeroes */	},
+};
+MODULE_DEVICE_TABLE(sdio, iwm_sdio_ids);
+
+static struct sdio_driver iwm_sdio_driver = {
+	.name		= "iwm_sdio",
+	.id_table	= iwm_sdio_ids,
+	.probe		= iwm_sdio_probe,
+	.remove		= iwm_sdio_remove,
+};
+
+static int __init iwm_sdio_init_module(void)
+{
+	int ret;
+
+	ret = sdio_register_driver(&iwm_sdio_driver);
+
+	return ret;
+}
+
+static void __exit iwm_sdio_exit_module(void)
+{
+	sdio_unregister_driver(&iwm_sdio_driver);
+}
+
+module_init(iwm_sdio_init_module);
+module_exit(iwm_sdio_exit_module);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(IWM_COPYRIGHT " " IWM_AUTHOR);
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.h b/drivers/net/wireless/iwmc3200wifi/sdio.h
new file mode 100644
index 00000000000..b3c156b08dd
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.h
@@ -0,0 +1,67 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_SDIO_H__
+#define __IWM_SDIO_H__
+
+#define SDIO_VENDOR_ID_INTEL 0x89
+#define SDIO_DEVICE_ID_IWM   0x1403
+
+#define IWM_SDIO_DATA_ADDR           0x0
+#define IWM_SDIO_INTR_ENABLE_ADDR    0x14
+#define IWM_SDIO_INTR_STATUS_ADDR    0x13
+#define IWM_SDIO_INTR_CLEAR_ADDR     0x13
+#define IWM_SDIO_INTR_GET_SIZE_ADDR  0x2C
+
+#define IWM_SDIO_BLK_SIZE       256
+
+#define iwm_to_if_sdio(i) (struct iwm_sdio_priv *)(iwm->private)
+
+struct iwm_sdio_priv {
+	struct sdio_func *func;
+	struct iwm_priv *iwm;
+
+	struct workqueue_struct *isr_wq;
+	struct work_struct isr_worker;
+
+	struct dentry *cccr_dentry;
+
+	unsigned int blk_size;
+};
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/tx.c b/drivers/net/wireless/iwmc3200wifi/tx.c
new file mode 100644
index 00000000000..e3b4f7902da
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/tx.c
@@ -0,0 +1,492 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+/*
+ * iwm Tx theory of operation:
+ *
+ * 1) We receive a 802.3 frame from the stack
+ * 2) We convert it to a 802.11 frame [iwm_xmit_frame]
+ * 3) We queue it to its corresponding tx queue [iwm_xmit_frame]
+ * 4) We schedule the tx worker. There is one worker per tx
+ *    queue. [iwm_xmit_frame]
+ * 5) The tx worker is scheduled
+ * 6) We go through every queued skb on the tx queue, and for each
+ *    and every one of them: [iwm_tx_worker]
+ *    a) We check if we have enough Tx credits (see below for a Tx
+ *       credits description) for the frame length. [iwm_tx_worker]
+ *    b) If we do, we aggregate the Tx frame into a UDMA one, by
+ *       concatenating one REPLY_TX command per Tx frame. [iwm_tx_worker]
+ *    c) When we run out of credits, or when we reach the maximum
+ *       concatenation size, we actually send the concatenated UDMA
+ *       frame. [iwm_tx_worker]
+ *
+ * When we run out of Tx credits, the skbs are filling the tx queue,
+ * and eventually we will stop the netdev queue. [iwm_tx_worker]
+ * The tx queue is emptied as we're getting new tx credits, by
+ * scheduling the tx_worker. [iwm_tx_credit_inc]
+ * The netdev queue is started again when we have enough tx credits,
+ * and when our tx queue has some reasonable amout of space available
+ * (i.e. half of the max size). [iwm_tx_worker]
+ */
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ieee80211.h>
+
+#include "iwm.h"
+#include "debug.h"
+#include "commands.h"
+#include "hal.h"
+#include "umac.h"
+#include "bus.h"
+
+#define IWM_UMAC_PAGE_ALLOC_WRAP 0xffff
+
+#define BYTES_TO_PAGES(n)	 (1 + ((n) >> ilog2(IWM_UMAC_PAGE_SIZE)) - \
+				 (((n) & (IWM_UMAC_PAGE_SIZE - 1)) == 0))
+
+#define pool_id_to_queue(id)	 ((id < IWM_TX_CMD_QUEUE) ? id : id - 1)
+#define queue_to_pool_id(q)	 ((q < IWM_TX_CMD_QUEUE) ? q : q + 1)
+
+/* require to hold tx_credit lock */
+static int iwm_tx_credit_get(struct iwm_tx_credit *tx_credit, int id)
+{
+	struct pool_entry *pool = &tx_credit->pools[id];
+	struct spool_entry *spool = &tx_credit->spools[pool->sid];
+	int spool_pages;
+
+	/* number of pages can be taken from spool by this pool */
+	spool_pages = spool->max_pages - spool->alloc_pages +
+		      max(pool->min_pages - pool->alloc_pages, 0);
+
+	return min(pool->max_pages - pool->alloc_pages, spool_pages);
+}
+
+static bool iwm_tx_credit_ok(struct iwm_priv *iwm, int id, int nb)
+{
+	u32 npages = BYTES_TO_PAGES(nb);
+
+	if (npages <= iwm_tx_credit_get(&iwm->tx_credit, id))
+		return 1;
+
+	set_bit(id, &iwm->tx_credit.full_pools_map);
+
+	IWM_DBG_TX(iwm, DBG, "LINK: stop txq[%d], available credit: %d\n",
+		   pool_id_to_queue(id),
+		   iwm_tx_credit_get(&iwm->tx_credit, id));
+
+	return 0;
+}
+
+void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages)
+{
+	struct pool_entry *pool;
+	struct spool_entry *spool;
+	int freed_pages;
+	int queue;
+
+	BUG_ON(id >= IWM_MACS_OUT_GROUPS);
+
+	pool = &iwm->tx_credit.pools[id];
+	spool = &iwm->tx_credit.spools[pool->sid];
+
+	freed_pages = total_freed_pages - pool->total_freed_pages;
+	IWM_DBG_TX(iwm, DBG, "Free %d pages for pool[%d]\n", freed_pages, id);
+
+	if (!freed_pages) {
+		IWM_DBG_TX(iwm, DBG, "No pages are freed by UMAC\n");
+		return;
+	} else if (freed_pages < 0)
+		freed_pages += IWM_UMAC_PAGE_ALLOC_WRAP + 1;
+
+	if (pool->alloc_pages > pool->min_pages) {
+		int spool_pages = pool->alloc_pages - pool->min_pages;
+		spool_pages = min(spool_pages, freed_pages);
+		spool->alloc_pages -= spool_pages;
+	}
+
+	pool->alloc_pages -= freed_pages;
+	pool->total_freed_pages = total_freed_pages;
+
+	IWM_DBG_TX(iwm, DBG, "Pool[%d] pages alloc: %d, total_freed: %d, "
+		   "Spool[%d] pages alloc: %d\n", id, pool->alloc_pages,
+		   pool->total_freed_pages, pool->sid, spool->alloc_pages);
+
+	if (test_bit(id, &iwm->tx_credit.full_pools_map) &&
+	    (pool->alloc_pages < pool->max_pages / 2)) {
+		clear_bit(id, &iwm->tx_credit.full_pools_map);
+
+		queue = pool_id_to_queue(id);
+
+		IWM_DBG_TX(iwm, DBG, "LINK: start txq[%d], available "
+			   "credit: %d\n", queue,
+			   iwm_tx_credit_get(&iwm->tx_credit, id));
+		queue_work(iwm->txq[queue].wq, &iwm->txq[queue].worker);
+	}
+}
+
+static void iwm_tx_credit_dec(struct iwm_priv *iwm, int id, int alloc_pages)
+{
+	struct pool_entry *pool;
+	struct spool_entry *spool;
+	int spool_pages;
+
+	IWM_DBG_TX(iwm, DBG, "Allocate %d pages for pool[%d]\n",
+		   alloc_pages, id);
+
+	BUG_ON(id >= IWM_MACS_OUT_GROUPS);
+
+	pool = &iwm->tx_credit.pools[id];
+	spool = &iwm->tx_credit.spools[pool->sid];
+
+	spool_pages = pool->alloc_pages + alloc_pages - pool->min_pages;
+
+	if (pool->alloc_pages >= pool->min_pages)
+		spool->alloc_pages += alloc_pages;
+	else if (spool_pages > 0)
+		spool->alloc_pages += spool_pages;
+
+	pool->alloc_pages += alloc_pages;
+
+	IWM_DBG_TX(iwm, DBG, "Pool[%d] pages alloc: %d, total_freed: %d, "
+		   "Spool[%d] pages alloc: %d\n", id, pool->alloc_pages,
+		   pool->total_freed_pages, pool->sid, spool->alloc_pages);
+}
+
+int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb)
+{
+	u32 npages = BYTES_TO_PAGES(nb);
+	int ret = 0;
+
+	spin_lock(&iwm->tx_credit.lock);
+
+	if (!iwm_tx_credit_ok(iwm, id, nb)) {
+		IWM_DBG_TX(iwm, DBG, "No credit avaliable for pool[%d]\n", id);
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	iwm_tx_credit_dec(iwm, id, npages);
+
+ out:
+	spin_unlock(&iwm->tx_credit.lock);
+	return ret;
+}
+
+/*
+ * Since we're on an SDIO or USB bus, we are not sharing memory
+ * for storing to be transmitted frames. The host needs to push
+ * them upstream. As a consequence there needs to be a way for
+ * the target to let us know if it can actually take more TX frames
+ * or not. This is what Tx credits are for.
+ *
+ * For each Tx HW queue, we have a Tx pool, and then we have one
+ * unique super pool (spool), which is actually a global pool of
+ * all the UMAC pages.
+ * For each Tx pool we have a min_pages, a max_pages fields, and a
+ * alloc_pages fields. The alloc_pages tracks the number of pages
+ * currently allocated from the tx pool.
+ * Here are the rules to check if given a tx frame we have enough
+ * tx credits for it:
+ * 1) We translate the frame length into a number of UMAC pages.
+ *    Let's call them n_pages.
+ * 2) For the corresponding tx pool, we check if n_pages +
+ *    pool->alloc_pages is higher than pool->min_pages. min_pages
+ *    represent a set of pre-allocated pages on the tx pool. If
+ *    that's the case, then we need to allocate those pages from
+ *    the spool. We can do so until we reach spool->max_pages.
+ * 3) Each tx pool is not allowed to allocate more than pool->max_pages
+ *    from the spool, so once we're over min_pages, we can allocate
+ *    pages from the spool, but not more than max_pages.
+ *
+ * When the tx code path needs to send a tx frame, it checks first
+ * if it has enough tx credits, following those rules. [iwm_tx_credit_get]
+ * If it does, it then updates the pool and spool counters and
+ * then send the frame. [iwm_tx_credit_alloc and iwm_tx_credit_dec]
+ * On the other side, when the UMAC is done transmitting frames, it
+ * will send a credit update notification to the host. This is when
+ * the pool and spool counters gets to be decreased. [iwm_tx_credit_inc,
+ * called from rx.c:iwm_ntf_tx_credit_update]
+ *
+ */
+void iwm_tx_credit_init_pools(struct iwm_priv *iwm,
+			      struct iwm_umac_notif_alive *alive)
+{
+	int i, sid, pool_pages;
+
+	spin_lock(&iwm->tx_credit.lock);
+
+	iwm->tx_credit.pool_nr = le16_to_cpu(alive->page_grp_count);
+	iwm->tx_credit.full_pools_map = 0;
+	memset(&iwm->tx_credit.spools[0], 0, sizeof(struct spool_entry));
+
+	IWM_DBG_TX(iwm, DBG, "Pools number is %d\n", iwm->tx_credit.pool_nr);
+
+	for (i = 0; i < iwm->tx_credit.pool_nr; i++) {
+		__le32 page_grp_state = alive->page_grp_state[i];
+
+		iwm->tx_credit.pools[i].id = GET_VAL32(page_grp_state,
+				UMAC_ALIVE_PAGE_STS_GRP_NUM);
+		iwm->tx_credit.pools[i].sid = GET_VAL32(page_grp_state,
+				UMAC_ALIVE_PAGE_STS_SGRP_NUM);
+		iwm->tx_credit.pools[i].min_pages = GET_VAL32(page_grp_state,
+				UMAC_ALIVE_PAGE_STS_GRP_MIN_SIZE);
+		iwm->tx_credit.pools[i].max_pages = GET_VAL32(page_grp_state,
+				UMAC_ALIVE_PAGE_STS_GRP_MAX_SIZE);
+		iwm->tx_credit.pools[i].alloc_pages = 0;
+		iwm->tx_credit.pools[i].total_freed_pages = 0;
+
+		sid = iwm->tx_credit.pools[i].sid;
+		pool_pages = iwm->tx_credit.pools[i].min_pages;
+
+		if (iwm->tx_credit.spools[sid].max_pages == 0) {
+			iwm->tx_credit.spools[sid].id = sid;
+			iwm->tx_credit.spools[sid].max_pages =
+				GET_VAL32(page_grp_state,
+					  UMAC_ALIVE_PAGE_STS_SGRP_MAX_SIZE);
+			iwm->tx_credit.spools[sid].alloc_pages = 0;
+		}
+
+		iwm->tx_credit.spools[sid].alloc_pages += pool_pages;
+
+		IWM_DBG_TX(iwm, DBG, "Pool idx: %d, id: %d, sid: %d, capacity "
+			   "min: %d, max: %d, pool alloc: %d, total_free: %d, "
+			   "super poll alloc: %d\n",
+			   i, iwm->tx_credit.pools[i].id,
+			   iwm->tx_credit.pools[i].sid,
+			   iwm->tx_credit.pools[i].min_pages,
+			   iwm->tx_credit.pools[i].max_pages,
+			   iwm->tx_credit.pools[i].alloc_pages,
+			   iwm->tx_credit.pools[i].total_freed_pages,
+			   iwm->tx_credit.spools[sid].alloc_pages);
+	}
+
+	spin_unlock(&iwm->tx_credit.lock);
+}
+
+#define IWM_UDMA_HDR_LEN	sizeof(struct iwm_umac_wifi_out_hdr)
+
+static int iwm_tx_build_packet(struct iwm_priv *iwm, struct sk_buff *skb,
+			       int pool_id, u8 *buf)
+{
+	struct iwm_umac_wifi_out_hdr *hdr = (struct iwm_umac_wifi_out_hdr *)buf;
+	struct iwm_udma_wifi_cmd udma_cmd;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_tx_info *tx_info = skb_to_tx_info(skb);
+
+	udma_cmd.count = cpu_to_le16(skb->len +
+				     sizeof(struct iwm_umac_fw_cmd_hdr));
+	/* set EOP to 0 here. iwm_udma_wifi_hdr_set_eop() will be
+	 * called later to set EOP for the last packet. */
+	udma_cmd.eop = 0;
+	udma_cmd.credit_group = pool_id;
+	udma_cmd.ra_tid = tx_info->sta << 4 | tx_info->tid;
+	udma_cmd.lmac_offset = 0;
+
+	umac_cmd.id = REPLY_TX;
+	umac_cmd.count = cpu_to_le16(skb->len);
+	umac_cmd.color = tx_info->color;
+	umac_cmd.resp = 0;
+	umac_cmd.seq_num = cpu_to_le16(iwm_alloc_wifi_cmd_seq(iwm));
+
+	iwm_build_udma_wifi_hdr(iwm, &hdr->hw_hdr, &udma_cmd);
+	iwm_build_umac_hdr(iwm, &hdr->sw_hdr, &umac_cmd);
+
+	memcpy(buf + sizeof(*hdr), skb->data, skb->len);
+
+	return 0;
+}
+
+static int iwm_tx_send_concat_packets(struct iwm_priv *iwm,
+				      struct iwm_tx_queue *txq)
+{
+	int ret;
+
+	if (!txq->concat_count)
+		return 0;
+
+	IWM_DBG_TX(iwm, DBG, "Send concatenated Tx: queue %d, %d bytes\n",
+		   txq->id, txq->concat_count);
+
+	/* mark EOP for the last packet */
+	iwm_udma_wifi_hdr_set_eop(iwm, txq->concat_ptr, 1);
+
+	ret = iwm_bus_send_chunk(iwm, txq->concat_buf, txq->concat_count);
+
+	txq->concat_count = 0;
+	txq->concat_ptr = txq->concat_buf;
+
+	return ret;
+}
+
+#define CONFIG_IWM_TX_CONCATENATED 1
+
+void iwm_tx_worker(struct work_struct *work)
+{
+	struct iwm_priv *iwm;
+	struct iwm_tx_info *tx_info = NULL;
+	struct sk_buff *skb;
+	int cmdlen, ret;
+	struct iwm_tx_queue *txq;
+	int pool_id;
+
+	txq = container_of(work, struct iwm_tx_queue, worker);
+	iwm = container_of(txq, struct iwm_priv, txq[txq->id]);
+
+	pool_id = queue_to_pool_id(txq->id);
+
+	while (!test_bit(pool_id, &iwm->tx_credit.full_pools_map) &&
+	       !skb_queue_empty(&txq->queue)) {
+
+		skb = skb_dequeue(&txq->queue);
+		tx_info = skb_to_tx_info(skb);
+		cmdlen = IWM_UDMA_HDR_LEN + skb->len;
+
+		IWM_DBG_TX(iwm, DBG, "Tx frame on queue %d: skb: 0x%p, sta: "
+			   "%d, color: %d\n", txq->id, skb, tx_info->sta,
+			   tx_info->color);
+
+#if !CONFIG_IWM_TX_CONCATENATED
+		/* temporarily keep this to comparing the performance */
+		ret = iwm_send_packet(iwm, skb, pool_id);
+#else
+
+		if (txq->concat_count + cmdlen > IWM_HAL_CONCATENATE_BUF_SIZE)
+			iwm_tx_send_concat_packets(iwm, txq);
+
+		ret = iwm_tx_credit_alloc(iwm, pool_id, cmdlen);
+		if (ret) {
+			IWM_DBG_TX(iwm, DBG, "not enough tx_credit for queue "
+				   "%d, Tx worker stopped\n", txq->id);
+			skb_queue_head(&txq->queue, skb);
+			break;
+		}
+
+		txq->concat_ptr = txq->concat_buf + txq->concat_count;
+		iwm_tx_build_packet(iwm, skb, pool_id, txq->concat_ptr);
+		txq->concat_count += ALIGN(cmdlen, 16);
+#endif
+		kfree_skb(skb);
+	}
+
+	iwm_tx_send_concat_packets(iwm, txq);
+
+	if (__netif_subqueue_stopped(iwm_to_ndev(iwm), txq->id) &&
+	    !test_bit(pool_id, &iwm->tx_credit.full_pools_map) &&
+	    (skb_queue_len(&txq->queue) < IWM_TX_LIST_SIZE / 2)) {
+		IWM_DBG_TX(iwm, DBG, "LINK: start netif_subqueue[%d]", txq->id);
+		netif_wake_subqueue(iwm_to_ndev(iwm), txq->id);
+	}
+}
+
+int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(netdev);
+	struct net_device *ndev = iwm_to_ndev(iwm);
+	struct wireless_dev *wdev = iwm_to_wdev(iwm);
+	u8 *dst_addr;
+	struct iwm_tx_info *tx_info;
+	struct iwm_tx_queue *txq;
+	struct iwm_sta_info *sta_info;
+	u8 sta_id;
+	u16 queue;
+	int ret;
+
+	if (!test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+		IWM_DBG_TX(iwm, DBG, "LINK: stop netif_all_queues: "
+			   "not associated\n");
+		netif_tx_stop_all_queues(netdev);
+		goto drop;
+	}
+
+	queue = skb_get_queue_mapping(skb);
+	BUG_ON(queue >= IWM_TX_DATA_QUEUES); /* no iPAN yet */
+
+	txq = &iwm->txq[queue];
+
+	/* No free space for Tx, tx_worker is too slow */
+	if (skb_queue_len(&txq->queue) > IWM_TX_LIST_SIZE) {
+		IWM_DBG_TX(iwm, DBG, "LINK: stop netif_subqueue[%d]\n", queue);
+		netif_stop_subqueue(netdev, queue);
+		return NETDEV_TX_BUSY;
+	}
+
+	ret = ieee80211_data_from_8023(skb, netdev->dev_addr, wdev->iftype,
+				       iwm->bssid, 0);
+	if (ret) {
+		IWM_ERR(iwm, "build wifi header failed\n");
+		goto drop;
+	}
+
+	dst_addr = ((struct ieee80211_hdr *)(skb->data))->addr1;
+
+	for (sta_id = 0; sta_id < IWM_STA_TABLE_NUM; sta_id++) {
+		sta_info = &iwm->sta_table[sta_id];
+		if (sta_info->valid &&
+		    !memcmp(dst_addr, sta_info->addr, ETH_ALEN))
+			break;
+	}
+
+	if (sta_id == IWM_STA_TABLE_NUM) {
+		IWM_ERR(iwm, "STA %pM not found in sta_table, Tx ignored\n",
+			dst_addr);
+		goto drop;
+	}
+
+	tx_info = skb_to_tx_info(skb);
+	tx_info->sta = sta_id;
+	tx_info->color = sta_info->color;
+	/* UMAC uses TID 8 (vs. 0) for non QoS packets */
+	if (sta_info->qos)
+		tx_info->tid = skb->priority;
+	else
+		tx_info->tid = IWM_UMAC_MGMT_TID;
+
+	skb_queue_tail(&iwm->txq[queue].queue, skb);
+
+	queue_work(iwm->txq[queue].wq, &iwm->txq[queue].worker);
+
+	ndev->stats.tx_packets++;
+	ndev->stats.tx_bytes += skb->len;
+	return NETDEV_TX_OK;
+
+ drop:
+	ndev->stats.tx_dropped++;
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/umac.h b/drivers/net/wireless/iwmc3200wifi/umac.h
new file mode 100644
index 00000000000..4a95cce1f0a
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/umac.h
@@ -0,0 +1,744 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ */
+
+#ifndef __IWM_UMAC_H__
+#define __IWM_UMAC_H__
+
+struct iwm_udma_in_hdr {
+	__le32 cmd;
+	__le32 size;
+} __attribute__ ((packed));
+
+struct iwm_udma_out_nonwifi_hdr {
+	__le32 cmd;
+	__le32 addr;
+	__le32 op1_sz;
+	__le32 op2;
+} __attribute__ ((packed));
+
+struct iwm_udma_out_wifi_hdr {
+	__le32 cmd;
+	__le32 meta_data;
+} __attribute__ ((packed));
+
+/* Sequence numbering */
+#define UMAC_WIFI_SEQ_NUM_BASE		1
+#define UMAC_WIFI_SEQ_NUM_MAX		0x4000
+#define UMAC_NONWIFI_SEQ_NUM_BASE	1
+#define UMAC_NONWIFI_SEQ_NUM_MAX	0x10
+
+/* MAC address address */
+#define WICO_MAC_ADDRESS_ADDR               0x604008F8
+
+/* RA / TID */
+#define UMAC_HDI_ACT_TBL_IDX_TID_POS                  0
+#define UMAC_HDI_ACT_TBL_IDX_TID_SEED                 0xF
+
+#define UMAC_HDI_ACT_TBL_IDX_RA_POS                   4
+#define UMAC_HDI_ACT_TBL_IDX_RA_SEED                  0xF
+
+#define UMAC_HDI_ACT_TBL_IDX_RA_UMAC                  0xF
+#define UMAC_HDI_ACT_TBL_IDX_TID_UMAC                 0x9
+#define UMAC_HDI_ACT_TBL_IDX_TID_LMAC                 0xA
+
+#define UMAC_HDI_ACT_TBL_IDX_HOST_CMD \
+	((UMAC_HDI_ACT_TBL_IDX_RA_UMAC << UMAC_HDI_ACT_TBL_IDX_RA_POS) |\
+	 (UMAC_HDI_ACT_TBL_IDX_TID_UMAC << UMAC_HDI_ACT_TBL_IDX_TID_POS))
+#define UMAC_HDI_ACT_TBL_IDX_UMAC_CMD \
+	((UMAC_HDI_ACT_TBL_IDX_RA_UMAC << UMAC_HDI_ACT_TBL_IDX_RA_POS) |\
+	(UMAC_HDI_ACT_TBL_IDX_TID_LMAC << UMAC_HDI_ACT_TBL_IDX_TID_POS))
+
+/* iwm_umac_notif_alive.page_grp_state Group number -- bits [3:0] */
+#define UMAC_ALIVE_PAGE_STS_GRP_NUM_POS		0
+#define UMAC_ALIVE_PAGE_STS_GRP_NUM_SEED	0xF
+
+/* iwm_umac_notif_alive.page_grp_state Super group number -- bits [7:4] */
+#define UMAC_ALIVE_PAGE_STS_SGRP_NUM_POS	4
+#define UMAC_ALIVE_PAGE_STS_SGRP_NUM_SEED	0xF
+
+/* iwm_umac_notif_alive.page_grp_state Group min size -- bits [15:8] */
+#define UMAC_ALIVE_PAGE_STS_GRP_MIN_SIZE_POS	8
+#define UMAC_ALIVE_PAGE_STS_GRP_MIN_SIZE_SEED	0xFF
+
+/* iwm_umac_notif_alive.page_grp_state Group max size -- bits [23:16] */
+#define UMAC_ALIVE_PAGE_STS_GRP_MAX_SIZE_POS	16
+#define UMAC_ALIVE_PAGE_STS_GRP_MAX_SIZE_SEED	0xFF
+
+/* iwm_umac_notif_alive.page_grp_state Super group max size -- bits [31:24] */
+#define UMAC_ALIVE_PAGE_STS_SGRP_MAX_SIZE_POS	24
+#define UMAC_ALIVE_PAGE_STS_SGRP_MAX_SIZE_SEED	0xFF
+
+/* Barkers */
+#define UMAC_REBOOT_BARKER		0xdeadbeef
+#define UMAC_ACK_BARKER			0xfeedbabe
+#define UMAC_PAD_TERMINAL		0xadadadad
+
+/* UMAC JMP address */
+#define UMAC_MU_FW_INST_DATA_12_ADDR    0xBF0000
+
+/* iwm_umac_hdi_out_hdr.cmd OP code -- bits [3:0] */
+#define UMAC_HDI_OUT_CMD_OPCODE_POS	0
+#define UMAC_HDI_OUT_CMD_OPCODE_SEED	0xF
+
+/* iwm_umac_hdi_out_hdr.cmd End-Of-Transfer -- bits [10:10] */
+#define UMAC_HDI_OUT_CMD_EOT_POS	10
+#define UMAC_HDI_OUT_CMD_EOT_SEED	0x1
+
+/* iwm_umac_hdi_out_hdr.cmd UTFD only usage -- bits [11:11] */
+#define UMAC_HDI_OUT_CMD_UTFD_ONLY_POS	11
+#define UMAC_HDI_OUT_CMD_UTFD_ONLY_SEED	0x1
+
+/* iwm_umac_hdi_out_hdr.cmd Non-WiFi HW sequence number -- bits [12:15] */
+#define UDMA_HDI_OUT_CMD_NON_WIFI_HW_SEQ_NUM_POS   12
+#define UDMA_HDI_OUT_CMD_NON_WIFI_HW_SEQ_NUM_SEED  0xF
+
+/* iwm_umac_hdi_out_hdr.cmd Signature -- bits [31:16] */
+#define UMAC_HDI_OUT_CMD_SIGNATURE_POS	16
+#define UMAC_HDI_OUT_CMD_SIGNATURE_SEED	0xFFFF
+
+/* iwm_umac_hdi_out_hdr.meta_data Byte count -- bits [11:0] */
+#define UMAC_HDI_OUT_BYTE_COUNT_POS	0
+#define UMAC_HDI_OUT_BYTE_COUNT_SEED	0xFFF
+
+/* iwm_umac_hdi_out_hdr.meta_data Credit group -- bits [15:12] */
+#define UMAC_HDI_OUT_CREDIT_GRP_POS	12
+#define UMAC_HDI_OUT_CREDIT_GRP_SEED	0xF
+
+/* iwm_umac_hdi_out_hdr.meta_data RA/TID -- bits [23:16] */
+#define UMAC_HDI_OUT_RATID_POS		16
+#define UMAC_HDI_OUT_RATID_SEED		0xFF
+
+/* iwm_umac_hdi_out_hdr.meta_data LMAC offset -- bits [31:24] */
+#define UMAC_HDI_OUT_LMAC_OFFSET_POS	24
+#define UMAC_HDI_OUT_LMAC_OFFSET_SEED	0xFF
+
+/* Signature */
+#define UMAC_HDI_OUT_SIGNATURE		0xCBBC
+
+/* buffer alignment */
+#define UMAC_HDI_BUF_ALIGN_MSK		0xF
+
+/*  iwm_umac_hdi_in_hdr.cmd OP code -- bits [3:0] */
+#define UMAC_HDI_IN_CMD_OPCODE_POS                0
+#define UMAC_HDI_IN_CMD_OPCODE_SEED               0xF
+
+/*  iwm_umac_hdi_in_hdr.cmd Non-WiFi API response -- bits [6:4] */
+#define UMAC_HDI_IN_CMD_NON_WIFI_RESP_POS         4
+#define UMAC_HDI_IN_CMD_NON_WIFI_RESP_SEED        0x7
+
+/* iwm_umac_hdi_in_hdr.cmd WiFi API source -- bits [5:4] */
+#define UMAC_HDI_IN_CMD_SOURCE_POS                4
+#define UMAC_HDI_IN_CMD_SOURCE_SEED               0x3
+
+/* iwm_umac_hdi_in_hdr.cmd WiFi API EOT -- bits [6:6] */
+#define UMAC_HDI_IN_CMD_EOT_POS                   6
+#define UMAC_HDI_IN_CMD_EOT_SEED                  0x1
+
+/* iwm_umac_hdi_in_hdr.cmd timestamp present -- bits [7:7] */
+#define UMAC_HDI_IN_CMD_TIME_STAMP_PRESENT_POS    7
+#define UMAC_HDI_IN_CMD_TIME_STAMP_PRESENT_SEED   0x1
+
+/* iwm_umac_hdi_in_hdr.cmd WiFi Non-last AMSDU -- bits [8:8] */
+#define UMAC_HDI_IN_CMD_NON_LAST_AMSDU_POS        8
+#define UMAC_HDI_IN_CMD_NON_LAST_AMSDU_SEED       0x1
+
+/* iwm_umac_hdi_in_hdr.cmd WiFi HW sequence number -- bits [31:9] */
+#define UMAC_HDI_IN_CMD_HW_SEQ_NUM_POS            9
+#define UMAC_HDI_IN_CMD_HW_SEQ_NUM_SEED           0x7FFFFF
+
+/* iwm_umac_hdi_in_hdr.cmd Non-WiFi HW sequence number -- bits [12:15] */
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SEQ_NUM_POS   12
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SEQ_NUM_SEED  0xF
+
+/* iwm_umac_hdi_in_hdr.cmd Non-WiFi HW signature -- bits [16:31] */
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG_POS       16
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG_SEED      0xFFFF
+
+/* Fixed Non-WiFi signature */
+#define UDMA_HDI_IN_CMD_NON_WIFI_HW_SIG           0xCBBC
+
+/* IN NTFY op-codes */
+#define UMAC_NOTIFY_OPCODE_ALIVE		0xA1
+#define UMAC_NOTIFY_OPCODE_INIT_COMPLETE	0xA2
+#define UMAC_NOTIFY_OPCODE_WIFI_CORE_STATUS	0xA3
+#define UMAC_NOTIFY_OPCODE_ERROR		0xA4
+#define UMAC_NOTIFY_OPCODE_DEBUG		0xA5
+#define UMAC_NOTIFY_OPCODE_WIFI_IF_WRAPPER	0xB0
+#define UMAC_NOTIFY_OPCODE_STATS		0xB1
+#define UMAC_NOTIFY_OPCODE_PAGE_DEALLOC		0xB3
+#define UMAC_NOTIFY_OPCODE_RX_TICKET		0xB4
+#define UMAC_NOTIFY_OPCODE_MAX		        (UMAC_NOTIFY_OPCODE_RX_TICKET -\
+						UMAC_NOTIFY_OPCODE_ALIVE + 1)
+#define UMAC_NOTIFY_OPCODE_FIRST		(UMAC_NOTIFY_OPCODE_ALIVE)
+
+/* HDI OUT OP CODE */
+#define UMAC_HDI_OUT_OPCODE_PING		0x0
+#define UMAC_HDI_OUT_OPCODE_READ		0x1
+#define UMAC_HDI_OUT_OPCODE_WRITE		0x2
+#define UMAC_HDI_OUT_OPCODE_JUMP		0x3
+#define UMAC_HDI_OUT_OPCODE_REBOOT		0x4
+#define UMAC_HDI_OUT_OPCODE_WRITE_PERSISTENT	0x5
+#define UMAC_HDI_OUT_OPCODE_READ_PERSISTENT	0x6
+#define UMAC_HDI_OUT_OPCODE_READ_MODIFY_WRITE	0x7
+/* #define UMAC_HDI_OUT_OPCODE_RESERVED		0x8..0xA */
+#define UMAC_HDI_OUT_OPCODE_WRITE_AUX_REG	0xB
+#define UMAC_HDI_OUT_OPCODE_WIFI		0xF
+
+/* HDI IN OP CODE -- Non WiFi*/
+#define UMAC_HDI_IN_OPCODE_PING			0x0
+#define UMAC_HDI_IN_OPCODE_READ			0x1
+#define UMAC_HDI_IN_OPCODE_WRITE		0x2
+#define UMAC_HDI_IN_OPCODE_WRITE_PERSISTENT	0x5
+#define UMAC_HDI_IN_OPCODE_READ_PERSISTENT	0x6
+#define UMAC_HDI_IN_OPCODE_READ_MODIFY_WRITE	0x7
+#define UMAC_HDI_IN_OPCODE_EP_MGMT		0x8
+#define UMAC_HDI_IN_OPCODE_CREDIT_CHANGE	0x9
+#define UMAC_HDI_IN_OPCODE_CTRL_DATABASE	0xA
+#define UMAC_HDI_IN_OPCODE_WRITE_AUX_REG	0xB
+#define UMAC_HDI_IN_OPCODE_NONWIFI_MAX \
+		(UMAC_HDI_IN_OPCODE_WRITE_AUX_REG + 1)
+#define UMAC_HDI_IN_OPCODE_WIFI			0xF
+
+/* HDI IN SOURCE */
+#define UMAC_HDI_IN_SOURCE_FHRX			0x0
+#define UMAC_HDI_IN_SOURCE_UDMA			0x1
+#define UMAC_HDI_IN_SOURCE_FW			0x2
+#define UMAC_HDI_IN_SOURCE_RESERVED		0x3
+
+/* OUT CMD op-codes */
+#define UMAC_CMD_OPCODE_ECHO                    0x01
+#define UMAC_CMD_OPCODE_HALT                    0x02
+#define UMAC_CMD_OPCODE_RESET                   0x03
+#define UMAC_CMD_OPCODE_BULK_EP_INACT_TIMEOUT   0x09
+#define UMAC_CMD_OPCODE_URB_CANCEL_ACK          0x0A
+#define UMAC_CMD_OPCODE_DCACHE_FLUSH            0x0B
+#define UMAC_CMD_OPCODE_EEPROM_PROXY            0x0C
+#define UMAC_CMD_OPCODE_TX_ECHO                 0x0D
+#define UMAC_CMD_OPCODE_DBG_MON                 0x0E
+#define UMAC_CMD_OPCODE_INTERNAL_TX             0x0F
+#define UMAC_CMD_OPCODE_SET_PARAM_FIX           0x10
+#define UMAC_CMD_OPCODE_SET_PARAM_VAR           0x11
+#define UMAC_CMD_OPCODE_GET_PARAM               0x12
+#define UMAC_CMD_OPCODE_DBG_EVENT_WRAPPER       0x13
+#define UMAC_CMD_OPCODE_TARGET                  0x14
+#define UMAC_CMD_OPCODE_STATISTIC_REQUEST       0x15
+#define UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST	0x16
+#define UMAC_CMD_OPCODE_SET_PARAM_LIST		0x17
+#define UMAC_CMD_OPCODE_GET_PARAM_LIST		0x18
+#define UMAC_CMD_OPCODE_BASE_WRAPPER            0xFA
+#define UMAC_CMD_OPCODE_LMAC_WRAPPER            0xFB
+#define UMAC_CMD_OPCODE_HW_TEST_WRAPPER         0xFC
+#define UMAC_CMD_OPCODE_WIFI_IF_WRAPPER         0xFD
+#define UMAC_CMD_OPCODE_WIFI_WRAPPER            0xFE
+#define UMAC_CMD_OPCODE_WIFI_PASS_THROUGH       0xFF
+
+/* UMAC WiFi interface op-codes */
+#define UMAC_WIFI_IF_CMD_SET_PROFILE                     0x11
+#define UMAC_WIFI_IF_CMD_INVALIDATE_PROFILE              0x12
+#define UMAC_WIFI_IF_CMD_SET_EXCLUDE_LIST                0x13
+#define UMAC_WIFI_IF_CMD_SCAN_REQUEST                    0x14
+#define UMAC_WIFI_IF_CMD_SCAN_CONFIG                     0x15
+#define UMAC_WIFI_IF_CMD_ADD_WEP40_KEY                   0x16
+#define UMAC_WIFI_IF_CMD_ADD_WEP104_KEY                  0x17
+#define UMAC_WIFI_IF_CMD_ADD_TKIP_KEY                    0x18
+#define UMAC_WIFI_IF_CMD_ADD_CCMP_KEY                    0x19
+#define UMAC_WIFI_IF_CMD_REMOVE_KEY                      0x1A
+#define UMAC_WIFI_IF_CMD_GLOBAL_TX_KEY_ID                0x1B
+#define UMAC_WIFI_IF_CMD_SET_HOST_EXTENDED_IE            0x1C
+#define UMAC_WIFI_IF_CMD_GET_SUPPORTED_CHANNELS          0x1E
+#define UMAC_WIFI_IF_CMD_TX_PWR_TRIGGER                  0x20
+
+/* UMAC WiFi interface ports */
+#define UMAC_WIFI_IF_FLG_PORT_DEF                        0x00
+#define UMAC_WIFI_IF_FLG_PORT_PAN                        0x01
+#define UMAC_WIFI_IF_FLG_PORT_PAN_INVALID                WIFI_IF_FLG_PORT_DEF
+
+/* UMAC WiFi interface actions */
+#define UMAC_WIFI_IF_FLG_ACT_GET                         0x10
+#define UMAC_WIFI_IF_FLG_ACT_SET                         0x20
+
+/* iwm_umac_fw_cmd_hdr.meta_data byte count -- bits [11:0] */
+#define UMAC_FW_CMD_BYTE_COUNT_POS            0
+#define UMAC_FW_CMD_BYTE_COUNT_SEED           0xFFF
+
+/* iwm_umac_fw_cmd_hdr.meta_data status -- bits [15:12] */
+#define UMAC_FW_CMD_STATUS_POS                12
+#define UMAC_FW_CMD_STATUS_SEED               0xF
+
+/* iwm_umac_fw_cmd_hdr.meta_data full TX command by Driver -- bits [16:16] */
+#define UMAC_FW_CMD_TX_DRV_FULL_CMD_POS       16
+#define UMAC_FW_CMD_TX_DRV_FULL_CMD_SEED      0x1
+
+/* iwm_umac_fw_cmd_hdr.meta_data TX command by FW -- bits [17:17] */
+#define UMAC_FW_CMD_TX_FW_CMD_POS             17
+#define UMAC_FW_CMD_TX_FW_CMD_SEED            0x1
+
+/* iwm_umac_fw_cmd_hdr.meta_data TX plaintext mode -- bits [18:18] */
+#define UMAC_FW_CMD_TX_PLAINTEXT_POS          18
+#define UMAC_FW_CMD_TX_PLAINTEXT_SEED         0x1
+
+/* iwm_umac_fw_cmd_hdr.meta_data STA color -- bits [22:20] */
+#define UMAC_FW_CMD_TX_STA_COLOR_POS          20
+#define UMAC_FW_CMD_TX_STA_COLOR_SEED         0x7
+
+/* iwm_umac_fw_cmd_hdr.meta_data TX life time (TU) -- bits [31:24] */
+#define UMAC_FW_CMD_TX_LIFETIME_TU_POS        24
+#define UMAC_FW_CMD_TX_LIFETIME_TU_SEED       0xFF
+
+/* iwm_dev_cmd_hdr.flags Response required -- bits [5:5] */
+#define UMAC_DEV_CMD_FLAGS_RESP_REQ_POS		5
+#define UMAC_DEV_CMD_FLAGS_RESP_REQ_SEED	0x1
+
+/* iwm_dev_cmd_hdr.flags Aborted command -- bits [6:6] */
+#define UMAC_DEV_CMD_FLAGS_ABORT_POS		6
+#define UMAC_DEV_CMD_FLAGS_ABORT_SEED		0x1
+
+/* iwm_dev_cmd_hdr.flags Internal command -- bits [7:7] */
+#define DEV_CMD_FLAGS_FLD_INTERNAL_POS		7
+#define DEV_CMD_FLAGS_FLD_INTERNAL_SEED		0x1
+
+/* Rx */
+/* Rx actions */
+#define IWM_RX_TICKET_DROP           0x0
+#define IWM_RX_TICKET_RELEASE        0x1
+#define IWM_RX_TICKET_SNIFFER        0x2
+#define IWM_RX_TICKET_ENQUEUE        0x3
+
+/* Rx flags */
+#define IWM_RX_TICKET_PAD_SIZE_MSK        0x2
+#define IWM_RX_TICKET_SPECIAL_SNAP_MSK    0x4
+#define IWM_RX_TICKET_AMSDU_MSK           0x8
+#define IWM_RX_TICKET_DROP_REASON_POS       4
+#define IWM_RX_TICKET_DROP_REASON_MSK (0x1F << RX_TICKET_FLAGS_DROP_REASON_POS)
+
+#define IWM_RX_DROP_NO_DROP                          0x0
+#define IWM_RX_DROP_BAD_CRC                          0x1
+/* L2P no address match */
+#define IWM_RX_DROP_LMAC_ADDR_FILTER                 0x2
+/* Multicast address not in list */
+#define IWM_RX_DROP_MCAST_ADDR_FILTER                0x3
+/* Control frames are not sent to the driver */
+#define IWM_RX_DROP_CTL_FRAME                        0x4
+/* Our frame is back */
+#define IWM_RX_DROP_OUR_TX                           0x5
+/* Association class filtering */
+#define IWM_RX_DROP_CLASS_FILTER                     0x6
+/* Duplicated frame */
+#define IWM_RX_DROP_DUPLICATE_FILTER                 0x7
+/* Decryption error */
+#define IWM_RX_DROP_SEC_ERR                          0x8
+/* Unencrypted frame while encryption is on */
+#define IWM_RX_DROP_SEC_NO_ENCRYPTION                0x9
+/* Replay check failure */
+#define IWM_RX_DROP_SEC_REPLAY_ERR                   0xa
+/* uCode and FW key color mismatch, check before replay */
+#define IWM_RX_DROP_SEC_KEY_COLOR_MISMATCH           0xb
+#define IWM_RX_DROP_SEC_TKIP_COUNTER_MEASURE         0xc
+/* No fragmentations Db is found */
+#define IWM_RX_DROP_FRAG_NO_RESOURCE                 0xd
+/* Fragmention Db has seqCtl mismatch Vs. non-1st frag */
+#define IWM_RX_DROP_FRAG_ERR                         0xe
+#define IWM_RX_DROP_FRAG_LOST                        0xf
+#define IWM_RX_DROP_FRAG_COMPLETE                    0x10
+/* Should be handled by UMAC */
+#define IWM_RX_DROP_MANAGEMENT                       0x11
+/* STA not found by UMAC */
+#define IWM_RX_DROP_NO_STATION                       0x12
+/* NULL or QoS NULL */
+#define IWM_RX_DROP_NULL_DATA                        0x13
+#define IWM_RX_DROP_BA_REORDER_OLD_SEQCTL            0x14
+#define IWM_RX_DROP_BA_REORDER_DUPLICATE             0x15
+
+struct iwm_rx_ticket {
+	__le16 action;
+	__le16 id;
+	__le16 flags;
+	u8 payload_offset; /* includes: MAC header, pad, IV */
+	u8 tail_len; /* includes: MIC, ICV, CRC (w/o STATUS) */
+} __attribute__ ((packed));
+
+struct iwm_rx_mpdu_hdr {
+	__le16 len;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+/* UMAC SW WIFI API */
+
+struct iwm_dev_cmd_hdr {
+	u8 cmd;
+	u8 flags;
+	__le16 seq_num;
+} __attribute__ ((packed));
+
+struct iwm_umac_fw_cmd_hdr {
+	__le32 meta_data;
+	struct iwm_dev_cmd_hdr cmd;
+} __attribute__ ((packed));
+
+struct iwm_umac_wifi_out_hdr {
+	struct iwm_udma_out_wifi_hdr hw_hdr;
+	struct iwm_umac_fw_cmd_hdr sw_hdr;
+} __attribute__ ((packed));
+
+struct iwm_umac_nonwifi_out_hdr {
+	struct iwm_udma_out_nonwifi_hdr hw_hdr;
+} __attribute__ ((packed));
+
+struct iwm_umac_wifi_in_hdr {
+	struct iwm_udma_in_hdr hw_hdr;
+	struct iwm_umac_fw_cmd_hdr sw_hdr;
+} __attribute__ ((packed));
+
+struct iwm_umac_nonwifi_in_hdr {
+	struct iwm_udma_in_hdr hw_hdr;
+	__le32 time_stamp;
+} __attribute__ ((packed));
+
+#define IWM_UMAC_PAGE_SIZE	0x200
+
+/* Notify structures */
+struct iwm_fw_version {
+	u8 minor;
+	u8 major;
+	__le16 id;
+};
+
+struct iwm_fw_build {
+	u8 type;
+	u8 subtype;
+	u8 platform;
+	u8 opt;
+};
+
+struct iwm_fw_alive_hdr {
+	struct iwm_fw_version ver;
+	struct iwm_fw_build build;
+	__le32 os_build;
+	__le32 log_hdr_addr;
+	__le32 log_buf_addr;
+	__le32 sys_timer_addr;
+};
+
+#define WAIT_NOTIF_TIMEOUT     (2 * HZ)
+#define SCAN_COMPLETE_TIMEOUT  (3 * HZ)
+
+#define UMAC_NTFY_ALIVE_STATUS_ERR		0xDEAD
+#define UMAC_NTFY_ALIVE_STATUS_OK		0xCAFE
+
+#define UMAC_NTFY_INIT_COMPLETE_STATUS_ERR	0xDEAD
+#define UMAC_NTFY_INIT_COMPLETE_STATUS_OK	0xCAFE
+
+#define UMAC_NTFY_WIFI_CORE_STATUS_LINK_EN      0x40
+#define UMAC_NTFY_WIFI_CORE_STATUS_MLME_EN      0x80
+
+#define IWM_MACS_OUT_GROUPS	6
+#define IWM_MACS_OUT_SGROUPS	1
+
+
+#define WIFI_IF_NTFY_ASSOC_START			0x80
+#define WIFI_IF_NTFY_ASSOC_COMPLETE			0x81
+#define WIFI_IF_NTFY_PROFILE_INVALIDATE_COMPLETE	0x82
+#define WIFI_IF_NTFY_CONNECTION_TERMINATED		0x83
+#define WIFI_IF_NTFY_SCAN_COMPLETE			0x84
+#define WIFI_IF_NTFY_STA_TABLE_CHANGE			0x85
+#define WIFI_IF_NTFY_EXTENDED_IE_REQUIRED		0x86
+#define WIFI_IF_NTFY_RADIO_PREEMPTION			0x87
+#define WIFI_IF_NTFY_BSS_TRK_TABLE_CHANGED		0x88
+#define WIFI_IF_NTFY_BSS_TRK_ENTRIES_REMOVED		0x89
+#define WIFI_IF_NTFY_LINK_QUALITY_STATISTICS		0x8A
+#define WIFI_IF_NTFY_MGMT_FRAME				0x8B
+
+/* DEBUG INDICATIONS */
+#define WIFI_DBG_IF_NTFY_SCAN_SUPER_JOB_START		0xE0
+#define WIFI_DBG_IF_NTFY_SCAN_SUPER_JOB_COMPLETE	0xE1
+#define WIFI_DBG_IF_NTFY_SCAN_CHANNEL_START		0xE2
+#define WIFI_DBG_IF_NTFY_SCAN_CHANNEL_RESULT		0xE3
+#define WIFI_DBG_IF_NTFY_SCAN_MINI_JOB_START		0xE4
+#define WIFI_DBG_IF_NTFY_SCAN_MINI_JOB_COMPLETE		0xE5
+#define WIFI_DBG_IF_NTFY_CNCT_ATC_START			0xE6
+#define WIFI_DBG_IF_NTFY_COEX_NOTIFICATION		0xE7
+#define WIFI_DBG_IF_NTFY_COEX_HANDLE_ENVELOP		0xE8
+#define WIFI_DBG_IF_NTFY_COEX_HANDLE_RELEASE_ENVELOP	0xE9
+
+/* Notification structures */
+struct iwm_umac_notif_wifi_if {
+	struct iwm_umac_wifi_in_hdr hdr;
+	u8 status;
+	u8 flags;
+	__le16 buf_size;
+} __attribute__ ((packed));
+
+#define UMAC_ROAM_REASON_FIRST_SELECTION	0x1
+#define UMAC_ROAM_REASON_AP_DEAUTH		0x2
+#define UMAC_ROAM_REASON_AP_CONNECT_LOST	0x3
+#define UMAC_ROAM_REASON_RSSI			0x4
+#define UMAC_ROAM_REASON_AP_ASSISTED_ROAM	0x5
+#define UMAC_ROAM_REASON_IBSS_COALESCING	0x6
+
+struct iwm_umac_notif_assoc_start {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 roam_reason;
+	u8 bssid[ETH_ALEN];
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+#define UMAC_ASSOC_COMPLETE_SUCCESS		0x0
+#define UMAC_ASSOC_COMPLETE_FAILURE		0x1
+
+struct iwm_umac_notif_assoc_complete {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 status;
+	u8 bssid[ETH_ALEN];
+	u8 band;
+	u8 channel;
+} __attribute__ ((packed));
+
+#define UMAC_PROFILE_INVALID_ASSOC_TIMEOUT	0x0
+#define UMAC_PROFILE_INVALID_ROAM_TIMEOUT	0x1
+#define UMAC_PROFILE_INVALID_REQUEST		0x2
+#define UMAC_PROFILE_INVALID_RF_PREEMPTED	0x3
+
+struct iwm_umac_notif_profile_invalidate {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 reason;
+} __attribute__ ((packed));
+
+#define UMAC_SCAN_RESULT_SUCCESS  0x0
+#define UMAC_SCAN_RESULT_ABORTED  0x1
+#define UMAC_SCAN_RESULT_REJECTED 0x2
+#define UMAC_SCAN_RESULT_FAILED   0x3
+
+struct iwm_umac_notif_scan_complete {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 type;
+	__le32 result;
+	u8 seq_num;
+} __attribute__ ((packed));
+
+#define UMAC_OPCODE_ADD_MODIFY	0x0
+#define UMAC_OPCODE_REMOVE	0x1
+#define UMAC_OPCODE_CLEAR_ALL	0x2
+
+#define UMAC_STA_FLAG_QOS	0x1
+
+struct iwm_umac_notif_sta_info {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 opcode;
+	u8 mac_addr[ETH_ALEN];
+	u8 sta_id; /* bits 0-3: station ID, bits 4-7: station color */
+	u8 flags;
+} __attribute__ ((packed));
+
+#define UMAC_BAND_2GHZ 0
+#define UMAC_BAND_5GHZ 1
+
+#define UMAC_CHANNEL_WIDTH_20MHZ 0
+#define UMAC_CHANNEL_WIDTH_40MHZ 1
+
+struct iwm_umac_notif_bss_info {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 type;
+	__le32 timestamp;
+	__le16 table_idx;
+	__le16 frame_len;
+	u8 band;
+	u8 channel;
+	s8 rssi;
+	u8 reserved;
+	u8 frame_buf[1];
+} __attribute__ ((packed));
+
+#define IWM_BSS_REMOVE_INDEX_MSK           0x0fff
+#define IWM_BSS_REMOVE_FLAGS_MSK           0xfc00
+
+#define IWM_BSS_REMOVE_FLG_AGE             0x1000
+#define IWM_BSS_REMOVE_FLG_TIMEOUT         0x2000
+#define IWM_BSS_REMOVE_FLG_TABLE_FULL      0x4000
+
+struct iwm_umac_notif_bss_removed {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le32 count;
+	__le16 entries[0];
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_mgt_frame {
+	struct iwm_umac_notif_wifi_if mlme_hdr;
+	__le16 len;
+	u8 frame[1];
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_alive {
+	struct iwm_umac_wifi_in_hdr hdr;
+	__le16 status;
+	__le16 reserved1;
+	struct iwm_fw_alive_hdr alive_data;
+	__le16 reserved2;
+	__le16 page_grp_count;
+	__le32 page_grp_state[IWM_MACS_OUT_GROUPS];
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_init_complete {
+	__le16 status;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+/* error categories */
+enum {
+	UMAC_SYS_ERR_CAT_NONE = 0,
+	UMAC_SYS_ERR_CAT_BOOT,
+	UMAC_SYS_ERR_CAT_UMAC,
+	UMAC_SYS_ERR_CAT_UAXM,
+	UMAC_SYS_ERR_CAT_LMAC,
+	UMAC_SYS_ERR_CAT_MAX
+};
+
+struct iwm_fw_error_hdr {
+	__le32 category;
+	__le32 status;
+	__le32 pc;
+	__le32 blink1;
+	__le32 blink2;
+	__le32 ilink1;
+	__le32 ilink2;
+	__le32 data1;
+	__le32 data2;
+	__le32 line_num;
+	__le32 umac_status;
+	__le32 lmac_status;
+	__le32 sdio_status;
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_error {
+	struct iwm_umac_wifi_in_hdr hdr;
+	struct iwm_fw_error_hdr err;
+} __attribute__ ((packed));
+
+#define UMAC_DEALLOC_NTFY_CHANGES_CNT_POS	0
+#define UMAC_DEALLOC_NTFY_CHANGES_CNT_SEED	0xff
+#define UMAC_DEALLOC_NTFY_CHANGES_MSK_POS	8
+#define UMAC_DEALLOC_NTFY_CHANGES_MSK_SEED	0xffffff
+#define UMAC_DEALLOC_NTFY_PAGE_CNT_POS		0
+#define UMAC_DEALLOC_NTFY_PAGE_CNT_SEED		0xffffff
+#define UMAC_DEALLOC_NTFY_GROUP_NUM_POS		24
+#define UMAC_DEALLOC_NTFY_GROUP_NUM_SEED	0xf
+
+struct iwm_umac_notif_page_dealloc {
+	struct iwm_umac_wifi_in_hdr hdr;
+	__le32 changes;
+	__le32 grp_info[IWM_MACS_OUT_GROUPS];
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_wifi_status {
+	struct iwm_umac_wifi_in_hdr hdr;
+	__le16 status;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct iwm_umac_notif_rx_ticket {
+	struct iwm_umac_wifi_in_hdr hdr;
+	u8 num_tickets;
+	u8 reserved[3];
+	struct iwm_rx_ticket tickets[1];
+} __attribute__ ((packed));
+
+/* Tx/Rx rates window (number of max of last update window per second) */
+#define UMAC_NTF_RATE_SAMPLE_NR	4
+
+#define IWM_UMAC_MGMT_TID	8
+#define IWM_UMAC_TID_NR		8
+
+struct iwm_umac_notif_stats {
+	struct iwm_umac_wifi_in_hdr hdr;
+	__le32 flags;
+	__le32 timestamp;
+	__le16 tid_load[IWM_UMAC_TID_NR + 2]; /* 1 non-QoS + 1 dword align */
+	__le16 tx_rate[UMAC_NTF_RATE_SAMPLE_NR];
+	__le16 rx_rate[UMAC_NTF_RATE_SAMPLE_NR];
+	s32 rssi_dbm;
+	s32 noise_dbm;
+	__le32 supp_rates;
+	__le32 missed_beacons;
+	__le32 rx_beacons;
+	__le32 rx_dir_pkts;
+	__le32 rx_nondir_pkts;
+	__le32 rx_multicast;
+	__le32 rx_errors;
+	__le32 rx_drop_other_bssid;
+	__le32 rx_drop_decode;
+	__le32 rx_drop_reassembly;
+	__le32 rx_drop_bad_len;
+	__le32 rx_drop_overflow;
+	__le32 rx_drop_crc;
+	__le32 rx_drop_missed;
+	__le32 tx_dir_pkts;
+	__le32 tx_nondir_pkts;
+	__le32 tx_failure;
+	__le32 tx_errors;
+	__le32 tx_drop_max_retry;
+	__le32 tx_err_abort;
+	__le32 tx_err_carrier;
+	__le32 rx_bytes;
+	__le32 tx_bytes;
+	__le32 tx_power;
+	__le32 tx_max_power;
+	__le32 roam_threshold;
+	__le32 ap_assoc_nr;
+	__le32 scan_full;
+	__le32 scan_abort;
+	__le32 ap_nr;
+	__le32 roam_nr;
+	__le32 roam_missed_beacons;
+	__le32 roam_rssi;
+	__le32 roam_unassoc;
+	__le32 roam_deauth;
+	__le32 roam_ap_loadblance;
+} __attribute__ ((packed));
+
+/* WiFi interface wrapper header */
+struct iwm_umac_wifi_if {
+	u8 oid;
+	u8 flags;
+	__le16 buf_size;
+} __attribute__ ((packed));
+
+#define IWM_SEQ_NUM_HOST_MSK	0x0000
+#define IWM_SEQ_NUM_UMAC_MSK	0x4000
+#define IWM_SEQ_NUM_LMAC_MSK	0x8000
+#define IWM_SEQ_NUM_MSK		0xC000
+
+#endif
diff --git a/drivers/net/wireless/iwmc3200wifi/wext.c b/drivers/net/wireless/iwmc3200wifi/wext.c
new file mode 100644
index 00000000000..584c94d0f39
--- /dev/null
+++ b/drivers/net/wireless/iwmc3200wifi/wext.c
@@ -0,0 +1,723 @@
+/*
+ * Intel Wireless Multicomm 3200 WiFi driver
+ *
+ * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
+ * Samuel Ortiz <samuel.ortiz@intel.com>
+ * Zhu Yi <yi.zhu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <net/cfg80211.h>
+#include <net/iw_handler.h>
+
+#include "iwm.h"
+#include "umac.h"
+#include "commands.h"
+#include "debug.h"
+
+static struct iw_statistics *iwm_get_wireless_stats(struct net_device *dev)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	struct iw_statistics *wstats = &iwm->wstats;
+
+	if (!test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+		memset(wstats, 0, sizeof(struct iw_statistics));
+		wstats->qual.updated = IW_QUAL_ALL_INVALID;
+	}
+
+	return wstats;
+}
+
+static int iwm_wext_siwfreq(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_freq *freq, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	if (freq->flags == IW_FREQ_AUTO)
+		return 0;
+
+	/* frequency/channel can only be set in IBSS mode */
+	if (iwm->conf.mode != UMAC_MODE_IBSS)
+		return -EOPNOTSUPP;
+
+	return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
+}
+
+static int iwm_wext_giwfreq(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_freq *freq, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS)
+		return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
+
+	freq->e = 0;
+	freq->m = iwm->channel;
+
+	return 0;
+}
+
+static int iwm_wext_siwap(struct net_device *dev, struct iw_request_info *info,
+			  struct sockaddr *ap_addr, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS)
+		return cfg80211_ibss_wext_siwap(dev, info, ap_addr, extra);
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return -EIO;
+
+	if (is_zero_ether_addr(ap_addr->sa_data) ||
+	    is_broadcast_ether_addr(ap_addr->sa_data)) {
+		IWM_DBG_WEXT(iwm, DBG, "clear mandatory bssid %pM\n",
+			     iwm->umac_profile->bssid[0]);
+		memset(&iwm->umac_profile->bssid[0], 0, ETH_ALEN);
+		iwm->umac_profile->bss_num = 0;
+	} else {
+		IWM_DBG_WEXT(iwm, DBG, "add mandatory bssid %pM\n",
+			     ap_addr->sa_data);
+		memcpy(&iwm->umac_profile->bssid[0], ap_addr->sa_data,
+		       ETH_ALEN);
+		iwm->umac_profile->bss_num = 1;
+	}
+
+	if (iwm->umac_profile_active) {
+		if (!memcmp(&iwm->umac_profile->bssid[0], iwm->bssid, ETH_ALEN))
+			return 0;
+
+		iwm_invalidate_mlme_profile(iwm);
+	}
+
+	if (iwm->umac_profile->ssid.ssid_len)
+		return iwm_send_mlme_profile(iwm);
+
+	return 0;
+}
+
+static int iwm_wext_giwap(struct net_device *dev, struct iw_request_info *info,
+			  struct sockaddr *ap_addr, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	switch (iwm->conf.mode) {
+	case UMAC_MODE_IBSS:
+		return cfg80211_ibss_wext_giwap(dev, info, ap_addr, extra);
+	case UMAC_MODE_BSS:
+		if (test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+			ap_addr->sa_family = ARPHRD_ETHER;
+			memcpy(&ap_addr->sa_data, iwm->bssid, ETH_ALEN);
+		} else
+			memset(&ap_addr->sa_data, 0, ETH_ALEN);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_wext_siwessid(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct iw_point *data, char *ssid)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	size_t len = data->length;
+	int ret;
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS)
+		return cfg80211_ibss_wext_siwessid(dev, info, data, ssid);
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return -EIO;
+
+	if (len > 0 && ssid[len - 1] == '\0')
+		len--;
+
+	if (iwm->umac_profile_active) {
+		if (iwm->umac_profile->ssid.ssid_len == len &&
+		    !memcmp(iwm->umac_profile->ssid.ssid, ssid, len))
+			return 0;
+
+		ret = iwm_invalidate_mlme_profile(iwm);
+		if (ret < 0) {
+			IWM_ERR(iwm, "Couldn't invalidate profile\n");
+			return ret;
+		}
+	}
+
+	iwm->umac_profile->ssid.ssid_len = len;
+	memcpy(iwm->umac_profile->ssid.ssid, ssid, len);
+
+	return iwm_send_mlme_profile(iwm);
+}
+
+static int iwm_wext_giwessid(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct iw_point *data, char *ssid)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	if (iwm->conf.mode == UMAC_MODE_IBSS)
+		return cfg80211_ibss_wext_giwessid(dev, info, data, ssid);
+
+	if (!test_bit(IWM_STATUS_READY, &iwm->status))
+		return -EIO;
+
+	data->length = iwm->umac_profile->ssid.ssid_len;
+	if (data->length) {
+		memcpy(ssid, iwm->umac_profile->ssid.ssid, data->length);
+		data->flags = 1;
+	} else
+		data->flags = 0;
+
+	return 0;
+}
+
+static struct iwm_key *
+iwm_key_init(struct iwm_priv *iwm, u8 key_idx, bool in_use,
+	     struct iw_encode_ext *ext, u8 alg)
+{
+	struct iwm_key *key = &iwm->keys[key_idx];
+
+	memset(key, 0, sizeof(struct iwm_key));
+	memcpy(key->hdr.mac, ext->addr.sa_data, ETH_ALEN);
+	key->hdr.key_idx = key_idx;
+	if (is_broadcast_ether_addr(ext->addr.sa_data))
+		key->hdr.multicast = 1;
+
+	key->in_use = in_use;
+	key->flags = ext->ext_flags;
+	key->alg = alg;
+	key->key_len = ext->key_len;
+	memcpy(key->key, ext->key, ext->key_len);
+
+	return key;
+}
+
+static int iwm_wext_giwrate(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_param *rate, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	rate->value = iwm->rate * 1000000;
+
+	return 0;
+}
+
+static int iwm_wext_siwencode(struct net_device *dev,
+			      struct iw_request_info *info,
+			      struct iw_point *erq, char *key_buf)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	struct iwm_key *uninitialized_var(key);
+	int idx, i, uninitialized_var(alg), remove = 0, ret;
+
+	IWM_DBG_WEXT(iwm, DBG, "key len: %d\n", erq->length);
+	IWM_DBG_WEXT(iwm, DBG, "flags: 0x%x\n", erq->flags);
+
+	if (!iwm->umac_profile) {
+		IWM_ERR(iwm, "UMAC profile not allocated yet\n");
+		return -ENODEV;
+	}
+
+	if (erq->length == WLAN_KEY_LEN_WEP40) {
+		alg = UMAC_CIPHER_TYPE_WEP_40;
+		iwm->umac_profile->sec.ucast_cipher = UMAC_CIPHER_TYPE_WEP_40;
+		iwm->umac_profile->sec.mcast_cipher = UMAC_CIPHER_TYPE_WEP_40;
+	} else if (erq->length == WLAN_KEY_LEN_WEP104) {
+		alg = UMAC_CIPHER_TYPE_WEP_104;
+		iwm->umac_profile->sec.ucast_cipher = UMAC_CIPHER_TYPE_WEP_104;
+		iwm->umac_profile->sec.mcast_cipher = UMAC_CIPHER_TYPE_WEP_104;
+	}
+
+	if (erq->flags & IW_ENCODE_RESTRICTED)
+		iwm->umac_profile->sec.auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+	else
+		iwm->umac_profile->sec.auth_type = UMAC_AUTH_TYPE_OPEN;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (idx == 0) {
+		if (iwm->default_key)
+			for (i = 0; i < IWM_NUM_KEYS; i++) {
+				if (iwm->default_key == &iwm->keys[i]) {
+					idx = i;
+					break;
+				}
+			}
+		else
+			iwm->default_key = &iwm->keys[idx];
+	} else if (idx < 1 || idx > 4) {
+		return -EINVAL;
+	} else
+		idx--;
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		remove = 1;
+	else if (erq->length == 0) {
+		if (!iwm->keys[idx].in_use)
+			return -EINVAL;
+		iwm->default_key = &iwm->keys[idx];
+	}
+
+	if (erq->length) {
+		key = &iwm->keys[idx];
+		memset(key, 0, sizeof(struct iwm_key));
+		memset(key->hdr.mac, 0xff, ETH_ALEN);
+		key->hdr.key_idx = idx;
+		key->hdr.multicast = 1;
+		key->in_use = !remove;
+		key->alg = alg;
+		key->key_len = erq->length;
+		memcpy(key->key, key_buf, erq->length);
+
+		IWM_DBG_WEXT(iwm, DBG, "Setting key %d, default: %d\n",
+			     idx, !!iwm->default_key);
+	}
+
+	if (remove) {
+		if ((erq->flags & IW_ENCODE_NOKEY) || (erq->length == 0)) {
+			int j;
+			for (j = 0; j < IWM_NUM_KEYS; j++)
+				if (iwm->keys[j].in_use) {
+					struct iwm_key *k = &iwm->keys[j];
+
+					k->in_use = 0;
+					ret = iwm_set_key(iwm, remove, 0, k);
+					if (ret < 0)
+						return ret;
+				}
+
+			iwm->umac_profile->sec.ucast_cipher =
+							UMAC_CIPHER_TYPE_NONE;
+			iwm->umac_profile->sec.mcast_cipher =
+							UMAC_CIPHER_TYPE_NONE;
+			iwm->umac_profile->sec.auth_type =
+							UMAC_AUTH_TYPE_OPEN;
+
+			return 0;
+		} else {
+			key->in_use = 0;
+			return iwm_set_key(iwm, remove, 0, key);
+		}
+	}
+
+	/*
+	 * If we havent set a profile yet, we cant set keys.
+	 * Keys will be pushed after we're associated.
+	 */
+	if (!iwm->umac_profile_active)
+		return 0;
+
+	/*
+	 * If there is a current active profile, but no
+	 * default key, it's not worth trying to associate again.
+	 */
+	if (!iwm->default_key)
+		return 0;
+
+	/*
+	 * Here we have an active profile, but a key setting changed.
+	 * We thus have to invalidate the current profile, and push the
+	 * new one. Keys will be pushed when association takes place.
+	 */
+	ret = iwm_invalidate_mlme_profile(iwm);
+	if (ret < 0) {
+		IWM_ERR(iwm, "Couldn't invalidate profile\n");
+		return ret;
+	}
+
+	return iwm_send_mlme_profile(iwm);
+}
+
+static int iwm_wext_giwencode(struct net_device *dev,
+			      struct iw_request_info *info,
+			      struct iw_point *erq, char *key)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	int idx, i;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (idx < 1 || idx > 4) {
+		idx = -1;
+		if (!iwm->default_key) {
+			erq->length = 0;
+			erq->flags |= IW_ENCODE_NOKEY;
+			return 0;
+		} else
+			for (i = 0; i < IWM_NUM_KEYS; i++) {
+				if (iwm->default_key == &iwm->keys[i]) {
+					idx = i;
+					break;
+				}
+			}
+		if (idx < 0)
+			return -EINVAL;
+	} else
+		idx--;
+
+	erq->flags = idx + 1;
+
+	if (!iwm->keys[idx].in_use) {
+		erq->length = 0;
+		erq->flags |= IW_ENCODE_DISABLED;
+		return 0;
+	}
+
+	memcpy(key, iwm->keys[idx].key,
+	       min_t(int, erq->length, iwm->keys[idx].key_len));
+	erq->length = iwm->keys[idx].key_len;
+	erq->flags |= IW_ENCODE_ENABLED;
+
+	if (iwm->umac_profile->mode == UMAC_MODE_BSS) {
+		switch (iwm->umac_profile->sec.auth_type) {
+		case UMAC_AUTH_TYPE_OPEN:
+			erq->flags |= IW_ENCODE_OPEN;
+			break;
+		default:
+			erq->flags |= IW_ENCODE_RESTRICTED;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int iwm_set_wpa_version(struct iwm_priv *iwm, u8 wpa_version)
+{
+	if (wpa_version & IW_AUTH_WPA_VERSION_WPA2)
+		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_RSNA_ON_MSK;
+	else if (wpa_version & IW_AUTH_WPA_VERSION_WPA)
+		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_WPA_ON_MSK;
+	else
+		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_LEGACY_PROFILE;
+
+	return 0;
+}
+
+static int iwm_wext_siwpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct iw_param *wrq, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	u32 power_index;
+
+	if (wrq->disabled) {
+		power_index = IWM_POWER_INDEX_MIN;
+		goto set;
+	} else
+		power_index = IWM_POWER_INDEX_DEFAULT;
+
+	switch (wrq->flags & IW_POWER_MODE) {
+	case IW_POWER_ON:
+	case IW_POWER_MODE:
+	case IW_POWER_ALL_R:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+ set:
+	if (power_index == iwm->conf.power_index)
+		return 0;
+
+	iwm->conf.power_index = power_index;
+
+	return iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+				       CFG_POWER_INDEX, iwm->conf.power_index);
+}
+
+static int iwm_wext_giwpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+
+	wrqu->power.disabled = (iwm->conf.power_index == IWM_POWER_INDEX_MIN);
+
+	return 0;
+}
+
+static int iwm_set_key_mgt(struct iwm_priv *iwm, u8 key_mgt)
+{
+	u8 *auth_type = &iwm->umac_profile->sec.auth_type;
+
+	if (key_mgt == IW_AUTH_KEY_MGMT_802_1X)
+		*auth_type = UMAC_AUTH_TYPE_8021X;
+	else if (key_mgt == IW_AUTH_KEY_MGMT_PSK) {
+		if (iwm->umac_profile->sec.flags &
+		    (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK))
+			*auth_type = UMAC_AUTH_TYPE_RSNA_PSK;
+		else
+			*auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+	} else {
+		IWM_ERR(iwm, "Invalid key mgt: 0x%x\n", key_mgt);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int iwm_set_cipher(struct iwm_priv *iwm, u8 cipher, u8 ucast)
+{
+	u8 *profile_cipher = ucast ? &iwm->umac_profile->sec.ucast_cipher :
+		&iwm->umac_profile->sec.mcast_cipher;
+
+	switch (cipher) {
+	case IW_AUTH_CIPHER_NONE:
+		*profile_cipher = UMAC_CIPHER_TYPE_NONE;
+		break;
+	case IW_AUTH_CIPHER_WEP40:
+		*profile_cipher = UMAC_CIPHER_TYPE_WEP_40;
+		break;
+	case IW_AUTH_CIPHER_TKIP:
+		*profile_cipher = UMAC_CIPHER_TYPE_TKIP;
+		break;
+	case IW_AUTH_CIPHER_CCMP:
+		*profile_cipher = UMAC_CIPHER_TYPE_CCMP;
+		break;
+	case IW_AUTH_CIPHER_WEP104:
+		*profile_cipher = UMAC_CIPHER_TYPE_WEP_104;
+		break;
+	default:
+		IWM_ERR(iwm, "Unsupported cipher: 0x%x\n", cipher);
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_set_auth_alg(struct iwm_priv *iwm, u8 auth_alg)
+{
+	u8 *auth_type = &iwm->umac_profile->sec.auth_type;
+
+	switch (auth_alg) {
+	case IW_AUTH_ALG_OPEN_SYSTEM:
+		*auth_type = UMAC_AUTH_TYPE_OPEN;
+		break;
+	case IW_AUTH_ALG_SHARED_KEY:
+		if (iwm->umac_profile->sec.flags &
+		    (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK)) {
+			if (*auth_type == UMAC_AUTH_TYPE_8021X)
+				return -EINVAL;
+			*auth_type = UMAC_AUTH_TYPE_RSNA_PSK;
+		} else {
+			*auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+		}
+		break;
+	case IW_AUTH_ALG_LEAP:
+	default:
+		IWM_ERR(iwm, "Unsupported auth alg: 0x%x\n", auth_alg);
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_wext_siwauth(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_param *data, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	int ret;
+
+	if ((data->flags) &
+	    (IW_AUTH_WPA_VERSION | IW_AUTH_KEY_MGMT |
+	     IW_AUTH_WPA_ENABLED | IW_AUTH_80211_AUTH_ALG)) {
+		/* We need to invalidate the current profile */
+		if (iwm->umac_profile_active) {
+			ret = iwm_invalidate_mlme_profile(iwm);
+			if (ret < 0) {
+				IWM_ERR(iwm, "Couldn't invalidate profile\n");
+				return ret;
+			}
+		}
+	}
+
+	switch (data->flags & IW_AUTH_INDEX) {
+	case IW_AUTH_WPA_VERSION:
+		return iwm_set_wpa_version(iwm, data->value);
+		break;
+	case IW_AUTH_CIPHER_PAIRWISE:
+		return iwm_set_cipher(iwm, data->value, 1);
+		break;
+	case IW_AUTH_CIPHER_GROUP:
+		return iwm_set_cipher(iwm, data->value, 0);
+		break;
+	case IW_AUTH_KEY_MGMT:
+		return iwm_set_key_mgt(iwm, data->value);
+		break;
+	case IW_AUTH_80211_AUTH_ALG:
+		return iwm_set_auth_alg(iwm, data->value);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int iwm_wext_giwauth(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_param *data, char *extra)
+{
+	return 0;
+}
+
+static int iwm_wext_siwencodeext(struct net_device *dev,
+				 struct iw_request_info *info,
+				 struct iw_point *erq, char *extra)
+{
+	struct iwm_priv *iwm = ndev_to_iwm(dev);
+	struct iwm_key *key;
+	struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
+	int uninitialized_var(alg), idx, i, remove = 0;
+
+	IWM_DBG_WEXT(iwm, DBG, "alg: 0x%x\n", ext->alg);
+	IWM_DBG_WEXT(iwm, DBG, "key len: %d\n", ext->key_len);
+	IWM_DBG_WEXT(iwm, DBG, "ext_flags: 0x%x\n", ext->ext_flags);
+	IWM_DBG_WEXT(iwm, DBG, "flags: 0x%x\n", erq->flags);
+	IWM_DBG_WEXT(iwm, DBG, "length: 0x%x\n", erq->length);
+
+	switch (ext->alg) {
+	case IW_ENCODE_ALG_NONE:
+		remove = 1;
+		break;
+	case IW_ENCODE_ALG_WEP:
+		if (ext->key_len == WLAN_KEY_LEN_WEP40)
+			alg = UMAC_CIPHER_TYPE_WEP_40;
+		else if (ext->key_len == WLAN_KEY_LEN_WEP104)
+			alg = UMAC_CIPHER_TYPE_WEP_104;
+		else {
+			IWM_ERR(iwm, "Invalid key length: %d\n", ext->key_len);
+			return -EINVAL;
+		}
+
+		break;
+	case IW_ENCODE_ALG_TKIP:
+		alg = UMAC_CIPHER_TYPE_TKIP;
+		break;
+	case IW_ENCODE_ALG_CCMP:
+		alg = UMAC_CIPHER_TYPE_CCMP;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+
+	if (idx == 0) {
+		if (iwm->default_key)
+			for (i = 0; i < IWM_NUM_KEYS; i++) {
+				if (iwm->default_key == &iwm->keys[i]) {
+					idx = i;
+					break;
+				}
+			}
+	} else if (idx < 1 || idx > 4) {
+		return -EINVAL;
+	} else
+		idx--;
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		remove = 1;
+	else if ((erq->length == 0) ||
+		 (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)) {
+		iwm->default_key = &iwm->keys[idx];
+		if (iwm->umac_profile_active && ext->alg == IW_ENCODE_ALG_WEP)
+			return iwm_set_tx_key(iwm, idx);
+	}
+
+	key = iwm_key_init(iwm, idx, !remove, ext, alg);
+
+	return iwm_set_key(iwm, remove, !iwm->default_key, key);
+}
+
+static const iw_handler iwm_handlers[] =
+{
+	(iw_handler) NULL,				/* SIOCSIWCOMMIT */
+	(iw_handler) cfg80211_wext_giwname,		/* SIOCGIWNAME */
+	(iw_handler) NULL,				/* SIOCSIWNWID */
+	(iw_handler) NULL,				/* SIOCGIWNWID */
+	(iw_handler) iwm_wext_siwfreq,			/* SIOCSIWFREQ */
+	(iw_handler) iwm_wext_giwfreq,			/* SIOCGIWFREQ */
+	(iw_handler) cfg80211_wext_siwmode,		/* SIOCSIWMODE */
+	(iw_handler) cfg80211_wext_giwmode,		/* SIOCGIWMODE */
+	(iw_handler) NULL,				/* SIOCSIWSENS */
+	(iw_handler) NULL,				/* SIOCGIWSENS */
+	(iw_handler) NULL /* not used */,		/* SIOCSIWRANGE */
+	(iw_handler) cfg80211_wext_giwrange,		/* SIOCGIWRANGE */
+	(iw_handler) NULL /* not used */,		/* SIOCSIWPRIV */
+	(iw_handler) NULL /* kernel code */,		/* SIOCGIWPRIV */
+	(iw_handler) NULL /* not used */,		/* SIOCSIWSTATS */
+	(iw_handler) NULL /* kernel code */,		/* SIOCGIWSTATS */
+	(iw_handler) NULL,				/* SIOCSIWSPY */
+	(iw_handler) NULL,				/* SIOCGIWSPY */
+	(iw_handler) NULL,				/* SIOCSIWTHRSPY */
+	(iw_handler) NULL,				/* SIOCGIWTHRSPY */
+	(iw_handler) iwm_wext_siwap,	                /* SIOCSIWAP */
+	(iw_handler) iwm_wext_giwap,			/* SIOCGIWAP */
+	(iw_handler) NULL,			        /* SIOCSIWMLME */
+	(iw_handler) NULL,				/* SIOCGIWAPLIST */
+	(iw_handler) cfg80211_wext_siwscan,		/* SIOCSIWSCAN */
+	(iw_handler) cfg80211_wext_giwscan,		/* SIOCGIWSCAN */
+	(iw_handler) iwm_wext_siwessid,			/* SIOCSIWESSID */
+	(iw_handler) iwm_wext_giwessid,			/* SIOCGIWESSID */
+	(iw_handler) NULL,				/* SIOCSIWNICKN */
+	(iw_handler) NULL,				/* SIOCGIWNICKN */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* SIOCSIWRATE */
+	(iw_handler) iwm_wext_giwrate,			/* SIOCGIWRATE */
+	(iw_handler) cfg80211_wext_siwrts,		/* SIOCSIWRTS */
+	(iw_handler) cfg80211_wext_giwrts,		/* SIOCGIWRTS */
+	(iw_handler) cfg80211_wext_siwfrag,	        /* SIOCSIWFRAG */
+	(iw_handler) cfg80211_wext_giwfrag,		/* SIOCGIWFRAG */
+	(iw_handler) NULL,				/* SIOCSIWTXPOW */
+	(iw_handler) NULL,				/* SIOCGIWTXPOW */
+	(iw_handler) NULL,				/* SIOCSIWRETRY */
+	(iw_handler) NULL,				/* SIOCGIWRETRY */
+	(iw_handler) iwm_wext_siwencode,		/* SIOCSIWENCODE */
+	(iw_handler) iwm_wext_giwencode,		/* SIOCGIWENCODE */
+	(iw_handler) iwm_wext_siwpower,			/* SIOCSIWPOWER */
+	(iw_handler) iwm_wext_giwpower,			/* SIOCGIWPOWER */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,				/* -- hole -- */
+	(iw_handler) NULL,                              /* SIOCSIWGENIE */
+	(iw_handler) NULL,				/* SIOCGIWGENIE */
+	(iw_handler) iwm_wext_siwauth,			/* SIOCSIWAUTH */
+	(iw_handler) iwm_wext_giwauth,			/* SIOCGIWAUTH */
+	(iw_handler) iwm_wext_siwencodeext,	        /* SIOCSIWENCODEEXT */
+	(iw_handler) NULL,				/* SIOCGIWENCODEEXT */
+	(iw_handler) NULL,				/* SIOCSIWPMKSA */
+	(iw_handler) NULL,				/* -- hole -- */
+};
+
+const struct iw_handler_def iwm_iw_handler_def = {
+	.num_standard	= ARRAY_SIZE(iwm_handlers),
+	.standard	= (iw_handler *) iwm_handlers,
+	.get_wireless_stats = iwm_get_wireless_stats,
+};
+
diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c
index 4bc46a60ae2..9a5408e7d94 100644
--- a/drivers/net/wireless/libertas/11d.c
+++ b/drivers/net/wireless/libertas/11d.c
@@ -207,7 +207,7 @@ static int generate_domain_info_11d(struct parsed_region_chan_11d
 	lbs_deb_11d("nr_subband=%x\n", domaininfo->nr_subband);
 	lbs_deb_hex(LBS_DEB_11D, "domaininfo", (char *)domaininfo,
 		COUNTRY_CODE_LEN + 1 +
-		sizeof(struct ieeetypes_subbandset) * nr_subband);
+		sizeof(struct ieee_subbandset) * nr_subband);
 	return 0;
 }
 
@@ -302,11 +302,9 @@ done:
  *  @param parsed_region_chan   pointer to parsed_region_chan_11d
  *  @return 	                0
 */
-static int parse_domain_info_11d(struct ieeetypes_countryinfofullset*
-				 countryinfo,
+static int parse_domain_info_11d(struct ieee_ie_country_info_full_set *countryinfo,
 				 u8 band,
-				 struct parsed_region_chan_11d *
-				 parsed_region_chan)
+				 struct parsed_region_chan_11d *parsed_region_chan)
 {
 	u8 nr_subband, nrchan;
 	u8 lastchan, firstchan;
@@ -331,7 +329,7 @@ static int parse_domain_info_11d(struct ieeetypes_countryinfofullset*
 	lbs_deb_hex(LBS_DEB_11D, "countryinfo", (u8 *) countryinfo, 30);
 
 	if ((*(countryinfo->countrycode)) == 0
-	    || (countryinfo->len <= COUNTRY_CODE_LEN)) {
+	    || (countryinfo->header.len <= COUNTRY_CODE_LEN)) {
 		/* No region Info or Wrong region info: treat as No 11D info */
 		goto done;
 	}
@@ -349,8 +347,8 @@ static int parse_domain_info_11d(struct ieeetypes_countryinfofullset*
 	memcpy(parsed_region_chan->countrycode, countryinfo->countrycode,
 	       COUNTRY_CODE_LEN);
 
-	nr_subband = (countryinfo->len - COUNTRY_CODE_LEN) /
-	    sizeof(struct ieeetypes_subbandset);
+	nr_subband = (countryinfo->header.len - COUNTRY_CODE_LEN) /
+	    sizeof(struct ieee_subbandset);
 
 	for (j = 0, lastchan = 0; j < nr_subband; j++) {
 
@@ -502,7 +500,7 @@ int lbs_cmd_802_11d_domain_info(struct lbs_private *priv,
 {
 	struct cmd_ds_802_11d_domain_info *pdomaininfo =
 	    &cmd->params.domaininfo;
-	struct mrvlietypes_domainparamset *domain = &pdomaininfo->domain;
+	struct mrvl_ie_domain_param_set *domain = &pdomaininfo->domain;
 	u8 nr_subband = priv->domainreg.nr_subband;
 
 	lbs_deb_enter(LBS_DEB_11D);
@@ -524,16 +522,16 @@ int lbs_cmd_802_11d_domain_info(struct lbs_private *priv,
 	       sizeof(domain->countrycode));
 
 	domain->header.len =
-	    cpu_to_le16(nr_subband * sizeof(struct ieeetypes_subbandset) +
+	    cpu_to_le16(nr_subband * sizeof(struct ieee_subbandset) +
 			     sizeof(domain->countrycode));
 
 	if (nr_subband) {
 		memcpy(domain->subband, priv->domainreg.subband,
-		       nr_subband * sizeof(struct ieeetypes_subbandset));
+		       nr_subband * sizeof(struct ieee_subbandset));
 
 		cmd->size = cpu_to_le16(sizeof(pdomaininfo->action) +
 					     le16_to_cpu(domain->header.len) +
-					     sizeof(struct mrvlietypesheader) +
+					     sizeof(struct mrvl_ie_header) +
 					     S_DS_GEN);
 	} else {
 		cmd->size =
@@ -556,7 +554,7 @@ done:
 int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp)
 {
 	struct cmd_ds_802_11d_domain_info *domaininfo = &resp->params.domaininforesp;
-	struct mrvlietypes_domainparamset *domain = &domaininfo->domain;
+	struct mrvl_ie_domain_param_set *domain = &domaininfo->domain;
 	u16 action = le16_to_cpu(domaininfo->action);
 	s16 ret = 0;
 	u8 nr_subband = 0;
@@ -567,7 +565,7 @@ int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp)
 		(int)le16_to_cpu(resp->size));
 
 	nr_subband = (le16_to_cpu(domain->header.len) - COUNTRY_CODE_LEN) /
-		      sizeof(struct ieeetypes_subbandset);
+		      sizeof(struct ieee_subbandset);
 
 	lbs_deb_11d("domain info resp: nr_subband %d\n", nr_subband);
 
diff --git a/drivers/net/wireless/libertas/11d.h b/drivers/net/wireless/libertas/11d.h
index 4f4f47f0f87..fb75d3e321a 100644
--- a/drivers/net/wireless/libertas/11d.h
+++ b/drivers/net/wireless/libertas/11d.h
@@ -20,35 +20,36 @@
 struct cmd_ds_command;
 
 /** Data structure for Country IE*/
-struct ieeetypes_subbandset {
+struct ieee_subbandset {
 	u8 firstchan;
 	u8 nrchan;
 	u8 maxtxpwr;
 } __attribute__ ((packed));
 
-struct ieeetypes_countryinfoset {
-	u8 element_id;
-	u8 len;
+struct ieee_ie_country_info_set {
+	struct ieee_ie_header header;
+
 	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieeetypes_subbandset subband[1];
+	struct ieee_subbandset subband[1];
 };
 
-struct ieeetypes_countryinfofullset {
-	u8 element_id;
-	u8 len;
+struct ieee_ie_country_info_full_set {
+	struct ieee_ie_header header;
+
 	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieeetypes_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
+	struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
 } __attribute__ ((packed));
 
-struct mrvlietypes_domainparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_domain_param_set {
+	struct mrvl_ie_header header;
+
 	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieeetypes_subbandset subband[1];
+	struct ieee_subbandset subband[1];
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11d_domain_info {
 	__le16 action;
-	struct mrvlietypes_domainparamset domain;
+	struct mrvl_ie_domain_param_set domain;
 } __attribute__ ((packed));
 
 /** domain regulatory information */
@@ -57,7 +58,7 @@ struct lbs_802_11d_domain_reg {
 	u8 countrycode[COUNTRY_CODE_LEN];
 	/** No. of subband*/
 	u8 nr_subband;
-	struct ieeetypes_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
+	struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
 };
 
 struct chan_power_11d {
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index d860fc37575..ab6a2d518af 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -72,7 +72,7 @@ rdrf
 	location that is to be read.  This parameter must be specified in
 	hexadecimal (its possible to preceed preceding the number with a "0x").
 
-	Path: /debugfs/libertas_wireless/ethX/registers/
+	Path: /sys/kernel/debug/libertas_wireless/ethX/registers/
 
 	Usage:
 		echo "0xa123" > rdmac ; cat rdmac
@@ -95,7 +95,7 @@ wrrf
 sleepparams
 	This command is used to set the sleepclock configurations
 
-	Path: /debugfs/libertas_wireless/ethX/
+	Path: /sys/kernel/debug/libertas_wireless/ethX/
 
 	Usage:
 		cat sleepparams: reads the current sleepclock configuration
@@ -115,7 +115,7 @@ subscribed_events
 	The subscribed_events directory contains the interface for the
 	subscribed events API.
 
-	Path: /debugfs/libertas_wireless/ethX/subscribed_events/
+	Path: /sys/kernel/debug/libertas_wireless/ethX/subscribed_events/
 
 	Each event is represented by a filename. Each filename consists of the
 	following three fields:
@@ -165,7 +165,7 @@ subscribed_events
 extscan
 	This command is used to do a specific scan.
 
-	Path: /debugfs/libertas_wireless/ethX/
+	Path: /sys/kernel/debug/libertas_wireless/ethX/
 
 	Usage: echo "SSID" > extscan
 
@@ -179,7 +179,7 @@ getscantable
 	Display the current contents of the driver scan table (ie. get the
 	scan results).
 
-	Path: /debugfs/libertas_wireless/ethX/
+	Path: /sys/kernel/debug/libertas_wireless/ethX/
 
 	Usage:
 		cat getscantable
@@ -188,7 +188,7 @@ setuserscan
 	Initiate a customized scan and retrieve the results
 
 
-	Path: /debugfs/libertas_wireless/ethX/
+	Path: /sys/kernel/debug/libertas_wireless/ethX/
 
     Usage:
        echo "[ARGS]" > setuserscan
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index a0e440cd896..b9b37411903 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -12,15 +12,14 @@
 #include "scan.h"
 #include "cmd.h"
 
-static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp);
-
 static const u8 bssid_any[ETH_ALEN]  __attribute__ ((aligned (2))) =
 	{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
 static const u8 bssid_off[ETH_ALEN]  __attribute__ ((aligned (2))) =
 	{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
 
-/* The firmware needs certain bits masked out of the beacon-derviced capability
- * field when associating/joining to BSSs.
+/* The firmware needs the following bits masked out of the beacon-derived
+ * capability field when associating/joining to a BSS:
+ *  9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused)
  */
 #define CAPINFO_MASK	(~(0xda00))
 
@@ -102,6 +101,295 @@ static void lbs_set_basic_rate_flags(u8 *rates, size_t len)
 }
 
 
+static u8 iw_auth_to_ieee_auth(u8 auth)
+{
+	if (auth == IW_AUTH_ALG_OPEN_SYSTEM)
+		return 0x00;
+	else if (auth == IW_AUTH_ALG_SHARED_KEY)
+		return 0x01;
+	else if (auth == IW_AUTH_ALG_LEAP)
+		return 0x80;
+
+	lbs_deb_join("%s: invalid auth alg 0x%X\n", __func__, auth);
+	return 0;
+}
+
+/**
+ *  @brief This function prepares the authenticate command.  AUTHENTICATE only
+ *  sets the authentication suite for future associations, as the firmware
+ *  handles authentication internally during the ASSOCIATE command.
+ *
+ *  @param priv      A pointer to struct lbs_private structure
+ *  @param bssid     The peer BSSID with which to authenticate
+ *  @param auth      The authentication mode to use (from wireless.h)
+ *
+ *  @return         0 or -1
+ */
+static int lbs_set_authentication(struct lbs_private *priv, u8 bssid[6], u8 auth)
+{
+	struct cmd_ds_802_11_authenticate cmd;
+	int ret = -1;
+	DECLARE_MAC_BUF(mac);
+
+	lbs_deb_enter(LBS_DEB_JOIN);
+
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+	memcpy(cmd.bssid, bssid, ETH_ALEN);
+
+	cmd.authtype = iw_auth_to_ieee_auth(auth);
+
+	lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n",
+		print_mac(mac, bssid), cmd.authtype);
+
+	ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd);
+
+	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
+	return ret;
+}
+
+
+static int lbs_assoc_post(struct lbs_private *priv,
+			  struct cmd_ds_802_11_associate_response *resp)
+{
+	int ret = 0;
+	union iwreq_data wrqu;
+	struct bss_descriptor *bss;
+	u16 status_code;
+
+	lbs_deb_enter(LBS_DEB_ASSOC);
+
+	if (!priv->in_progress_assoc_req) {
+		lbs_deb_assoc("ASSOC_RESP: no in-progress assoc request\n");
+		ret = -1;
+		goto done;
+	}
+	bss = &priv->in_progress_assoc_req->bss;
+
+	/*
+	 * Older FW versions map the IEEE 802.11 Status Code in the association
+	 * response to the following values returned in resp->statuscode:
+	 *
+	 *    IEEE Status Code                Marvell Status Code
+	 *    0                       ->      0x0000 ASSOC_RESULT_SUCCESS
+	 *    13                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+	 *    14                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+	 *    15                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+	 *    16                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
+	 *    others                  ->      0x0003 ASSOC_RESULT_REFUSED
+	 *
+	 * Other response codes:
+	 *    0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
+	 *    0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
+	 *                                    association response from the AP)
+	 */
+
+	status_code = le16_to_cpu(resp->statuscode);
+	if (priv->fwrelease < 0x09000000) {
+		switch (status_code) {
+		case 0x00:
+			break;
+		case 0x01:
+			lbs_deb_assoc("ASSOC_RESP: invalid parameters\n");
+			break;
+		case 0x02:
+			lbs_deb_assoc("ASSOC_RESP: internal timer "
+				"expired while waiting for the AP\n");
+			break;
+		case 0x03:
+			lbs_deb_assoc("ASSOC_RESP: association "
+				"refused by AP\n");
+			break;
+		case 0x04:
+			lbs_deb_assoc("ASSOC_RESP: authentication "
+				"refused by AP\n");
+			break;
+		default:
+			lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x "
+				" unknown\n", status_code);
+			break;
+		}
+	} else {
+		/* v9+ returns the AP's association response */
+		lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x\n", status_code);
+	}
+
+	if (status_code) {
+		lbs_mac_event_disconnected(priv);
+		ret = -1;
+		goto done;
+	}
+
+	lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_RESP",
+		    (void *) (resp + sizeof (resp->hdr)),
+		    le16_to_cpu(resp->hdr.size) - sizeof (resp->hdr));
+
+	/* Send a Media Connected event, according to the Spec */
+	priv->connect_status = LBS_CONNECTED;
+
+	/* Update current SSID and BSSID */
+	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
+	priv->curbssparams.ssid_len = bss->ssid_len;
+	memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
+
+	priv->SNR[TYPE_RXPD][TYPE_AVG] = 0;
+	priv->NF[TYPE_RXPD][TYPE_AVG] = 0;
+
+	memset(priv->rawSNR, 0x00, sizeof(priv->rawSNR));
+	memset(priv->rawNF, 0x00, sizeof(priv->rawNF));
+	priv->nextSNRNF = 0;
+	priv->numSNRNF = 0;
+
+	netif_carrier_on(priv->dev);
+	if (!priv->tx_pending_len)
+		netif_wake_queue(priv->dev);
+
+	memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN);
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+
+done:
+	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
+	return ret;
+}
+
+/**
+ *  @brief This function prepares an association-class command.
+ *
+ *  @param priv      A pointer to struct lbs_private structure
+ *  @param assoc_req The association request describing the BSS to associate
+ *                   or reassociate with
+ *  @param command   The actual command, either CMD_802_11_ASSOCIATE or
+ *                   CMD_802_11_REASSOCIATE
+ *
+ *  @return         0 or -1
+ */
+static int lbs_associate(struct lbs_private *priv,
+			 struct assoc_request *assoc_req,
+			 u16 command)
+{
+	struct cmd_ds_802_11_associate cmd;
+	int ret = 0;
+	struct bss_descriptor *bss = &assoc_req->bss;
+	u8 *pos = &(cmd.iebuf[0]);
+	u16 tmpcap, tmplen, tmpauth;
+	struct mrvl_ie_ssid_param_set *ssid;
+	struct mrvl_ie_ds_param_set *ds;
+	struct mrvl_ie_cf_param_set *cf;
+	struct mrvl_ie_rates_param_set *rates;
+	struct mrvl_ie_rsn_param_set *rsn;
+	struct mrvl_ie_auth_type *auth;
+
+	lbs_deb_enter(LBS_DEB_ASSOC);
+
+	BUG_ON((command != CMD_802_11_ASSOCIATE) &&
+		(command != CMD_802_11_REASSOCIATE));
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.hdr.command = cpu_to_le16(command);
+
+	/* Fill in static fields */
+	memcpy(cmd.bssid, bss->bssid, ETH_ALEN);
+	cmd.listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL);
+
+	/* Capability info */
+	tmpcap = (bss->capability & CAPINFO_MASK);
+	if (bss->mode == IW_MODE_INFRA)
+		tmpcap |= WLAN_CAPABILITY_ESS;
+	cmd.capability = cpu_to_le16(tmpcap);
+	lbs_deb_assoc("ASSOC_CMD: capability 0x%04x\n", tmpcap);
+
+	/* SSID */
+	ssid = (struct mrvl_ie_ssid_param_set *) pos;
+	ssid->header.type = cpu_to_le16(TLV_TYPE_SSID);
+	tmplen = bss->ssid_len;
+	ssid->header.len = cpu_to_le16(tmplen);
+	memcpy(ssid->ssid, bss->ssid, tmplen);
+	pos += sizeof(ssid->header) + tmplen;
+
+	ds = (struct mrvl_ie_ds_param_set *) pos;
+	ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS);
+	ds->header.len = cpu_to_le16(1);
+	ds->channel = bss->phy.ds.channel;
+	pos += sizeof(ds->header) + 1;
+
+	cf = (struct mrvl_ie_cf_param_set *) pos;
+	cf->header.type = cpu_to_le16(TLV_TYPE_CF);
+	tmplen = sizeof(*cf) - sizeof (cf->header);
+	cf->header.len = cpu_to_le16(tmplen);
+	/* IE payload should be zeroed, firmware fills it in for us */
+	pos += sizeof(*cf);
+
+	rates = (struct mrvl_ie_rates_param_set *) pos;
+	rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
+	memcpy(&rates->rates, &bss->rates, MAX_RATES);
+	tmplen = MAX_RATES;
+	if (get_common_rates(priv, rates->rates, &tmplen)) {
+		ret = -1;
+		goto done;
+	}
+	pos += sizeof(rates->header) + tmplen;
+	rates->header.len = cpu_to_le16(tmplen);
+	lbs_deb_assoc("ASSOC_CMD: num rates %u\n", tmplen);
+
+	/* Copy the infra. association rates into Current BSS state structure */
+	memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates));
+	memcpy(&priv->curbssparams.rates, &rates->rates, tmplen);
+
+	/* Set MSB on basic rates as the firmware requires, but _after_
+	 * copying to current bss rates.
+	 */
+	lbs_set_basic_rate_flags(rates->rates, tmplen);
+
+	/* Firmware v9+ indicate authentication suites as a TLV */
+	if (priv->fwrelease >= 0x09000000) {
+		DECLARE_MAC_BUF(mac);
+
+		auth = (struct mrvl_ie_auth_type *) pos;
+		auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE);
+		auth->header.len = cpu_to_le16(2);
+		tmpauth = iw_auth_to_ieee_auth(priv->secinfo.auth_mode);
+		auth->auth = cpu_to_le16(tmpauth);
+		pos += sizeof(auth->header) + 2;
+
+		lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n",
+			print_mac(mac, bss->bssid), priv->secinfo.auth_mode);
+	}
+
+	/* WPA/WPA2 IEs */
+	if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) {
+		rsn = (struct mrvl_ie_rsn_param_set *) pos;
+		/* WPA_IE or WPA2_IE */
+		rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]);
+		tmplen = (u16) assoc_req->wpa_ie[1];
+		rsn->header.len = cpu_to_le16(tmplen);
+		memcpy(rsn->rsnie, &assoc_req->wpa_ie[2], tmplen);
+		lbs_deb_hex(LBS_DEB_JOIN, "ASSOC_CMD: WPA/RSN IE", (u8 *) rsn,
+			sizeof(rsn->header) + tmplen);
+		pos += sizeof(rsn->header) + tmplen;
+	}
+
+	cmd.hdr.size = cpu_to_le16((sizeof(cmd) - sizeof(cmd.iebuf)) +
+				   (u16)(pos - (u8 *) &cmd.iebuf));
+
+	/* update curbssparams */
+	priv->curbssparams.channel = bss->phy.ds.channel;
+
+	if (lbs_parse_dnld_countryinfo_11d(priv, bss)) {
+		ret = -1;
+		goto done;
+	}
+
+	ret = lbs_cmd_with_response(priv, command, &cmd);
+	if (ret == 0) {
+		ret = lbs_assoc_post(priv,
+			(struct cmd_ds_802_11_associate_response *) &cmd);
+	}
+
+done:
+	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
+	return ret;
+}
+
 /**
  *  @brief Associate to a specific BSS discovered in a scan
  *
@@ -110,7 +398,7 @@ static void lbs_set_basic_rate_flags(u8 *rates, size_t len)
  *
  *  @return          0-success, otherwise fail
  */
-static int lbs_associate(struct lbs_private *priv,
+static int lbs_try_associate(struct lbs_private *priv,
 	struct assoc_request *assoc_req)
 {
 	int ret;
@@ -118,11 +406,15 @@ static int lbs_associate(struct lbs_private *priv,
 
 	lbs_deb_enter(LBS_DEB_ASSOC);
 
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11_AUTHENTICATE,
-				    0, CMD_OPTION_WAITFORRSP,
-				    0, assoc_req->bss.bssid);
-	if (ret)
-		goto out;
+	/* FW v9 and higher indicate authentication suites as a TLV in the
+	 * association command, not as a separate authentication command.
+	 */
+	if (priv->fwrelease < 0x09000000) {
+		ret = lbs_set_authentication(priv, assoc_req->bss.bssid,
+					     priv->secinfo.auth_mode);
+		if (ret)
+			goto out;
+	}
 
 	/* Use short preamble only when both the BSS and firmware support it */
 	if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) &&
@@ -133,14 +425,78 @@ static int lbs_associate(struct lbs_private *priv,
 	if (ret)
 		goto out;
 
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11_ASSOCIATE,
-				    0, CMD_OPTION_WAITFORRSP, 0, assoc_req);
+	ret = lbs_associate(priv, assoc_req, CMD_802_11_ASSOCIATE);
 
 out:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
 	return ret;
 }
 
+static int lbs_adhoc_post(struct lbs_private *priv,
+			  struct cmd_ds_802_11_ad_hoc_result *resp)
+{
+	int ret = 0;
+	u16 command = le16_to_cpu(resp->hdr.command);
+	u16 result = le16_to_cpu(resp->hdr.result);
+	union iwreq_data wrqu;
+	struct bss_descriptor *bss;
+	DECLARE_SSID_BUF(ssid);
+
+	lbs_deb_enter(LBS_DEB_JOIN);
+
+	if (!priv->in_progress_assoc_req) {
+		lbs_deb_join("ADHOC_RESP: no in-progress association "
+			"request\n");
+		ret = -1;
+		goto done;
+	}
+	bss = &priv->in_progress_assoc_req->bss;
+
+	/*
+	 * Join result code 0 --> SUCCESS
+	 */
+	if (result) {
+		lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result);
+		if (priv->connect_status == LBS_CONNECTED)
+			lbs_mac_event_disconnected(priv);
+		ret = -1;
+		goto done;
+	}
+
+	/* Send a Media Connected event, according to the Spec */
+	priv->connect_status = LBS_CONNECTED;
+
+	if (command == CMD_RET(CMD_802_11_AD_HOC_START)) {
+		/* Update the created network descriptor with the new BSSID */
+		memcpy(bss->bssid, resp->bssid, ETH_ALEN);
+	}
+
+	/* Set the BSSID from the joined/started descriptor */
+	memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
+
+	/* Set the new SSID to current SSID */
+	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
+	priv->curbssparams.ssid_len = bss->ssid_len;
+
+	netif_carrier_on(priv->dev);
+	if (!priv->tx_pending_len)
+		netif_wake_queue(priv->dev);
+
+	memset(&wrqu, 0, sizeof(wrqu));
+	memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN);
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+
+	lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n",
+		     print_ssid(ssid, bss->ssid, bss->ssid_len),
+		     priv->curbssparams.bssid,
+		     priv->curbssparams.channel);
+
+done:
+	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
+	return ret;
+}
+
 /**
  *  @brief Join an adhoc network found in a previous scan
  *
@@ -219,11 +575,10 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 	memcpy(&cmd.bss.bssid, &bss->bssid, ETH_ALEN);
 	memcpy(&cmd.bss.ssid, &bss->ssid, bss->ssid_len);
 
-	memcpy(&cmd.bss.phyparamset, &bss->phyparamset,
-	       sizeof(union ieeetypes_phyparamset));
+	memcpy(&cmd.bss.ds, &bss->phy.ds, sizeof(struct ieee_ie_ds_param_set));
 
-	memcpy(&cmd.bss.ssparamset, &bss->ssparamset,
-	       sizeof(union IEEEtypes_ssparamset));
+	memcpy(&cmd.bss.ibss, &bss->ss.ibss,
+	       sizeof(struct ieee_ie_ibss_param_set));
 
 	cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK);
 	lbs_deb_join("ADHOC_J_CMD: tmpcap=%4X CAPINFO_MASK=%4X\n",
@@ -260,7 +615,7 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 	 */
 	lbs_set_basic_rate_flags(cmd.bss.rates, ratesize);
 
-	cmd.bss.ssparamset.ibssparamset.atimwindow = cpu_to_le16(bss->atimwindow);
+	cmd.bss.ibss.atimwindow = bss->atimwindow;
 
 	if (assoc_req->secinfo.wep_enabled) {
 		u16 tmp = le16_to_cpu(cmd.bss.capability);
@@ -287,8 +642,10 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 	}
 
 	ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd);
-	if (ret == 0)
-		ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd);
+	if (ret == 0) {
+		ret = lbs_adhoc_post(priv,
+				     (struct cmd_ds_802_11_ad_hoc_result *)&cmd);
+	}
 
 out:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -343,22 +700,24 @@ static int lbs_adhoc_start(struct lbs_private *priv,
 	WARN_ON(!assoc_req->channel);
 
 	/* set Physical parameter set */
-	cmd.phyparamset.dsparamset.elementid = WLAN_EID_DS_PARAMS;
-	cmd.phyparamset.dsparamset.len = 1;
-	cmd.phyparamset.dsparamset.currentchan = assoc_req->channel;
+	cmd.ds.header.id = WLAN_EID_DS_PARAMS;
+	cmd.ds.header.len = 1;
+	cmd.ds.channel = assoc_req->channel;
 
 	/* set IBSS parameter set */
-	cmd.ssparamset.ibssparamset.elementid = WLAN_EID_IBSS_PARAMS;
-	cmd.ssparamset.ibssparamset.len = 2;
-	cmd.ssparamset.ibssparamset.atimwindow = 0;
+	cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS;
+	cmd.ibss.header.len = 2;
+	cmd.ibss.atimwindow = cpu_to_le16(0);
 
 	/* set capability info */
 	tmpcap = WLAN_CAPABILITY_IBSS;
-	if (assoc_req->secinfo.wep_enabled) {
-		lbs_deb_join("ADHOC_START: WEP enabled, setting privacy on\n");
+	if (assoc_req->secinfo.wep_enabled ||
+	    assoc_req->secinfo.WPAenabled ||
+	    assoc_req->secinfo.WPA2enabled) {
+		lbs_deb_join("ADHOC_START: WEP/WPA enabled, privacy on\n");
 		tmpcap |= WLAN_CAPABILITY_PRIVACY;
 	} else
-		lbs_deb_join("ADHOC_START: WEP disabled, setting privacy off\n");
+		lbs_deb_join("ADHOC_START: WEP disabled, privacy off\n");
 
 	cmd.capability = cpu_to_le16(tmpcap);
 
@@ -395,7 +754,8 @@ static int lbs_adhoc_start(struct lbs_private *priv,
 
 	ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd);
 	if (ret == 0)
-		ret = lbs_adhoc_post(priv, (struct cmd_header *) &cmd);
+		ret = lbs_adhoc_post(priv,
+				     (struct cmd_ds_802_11_ad_hoc_result *)&cmd);
 
 out:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -720,7 +1080,7 @@ static int assoc_helper_essid(struct lbs_private *priv,
 				assoc_req->ssid_len, NULL, IW_MODE_INFRA, channel);
 		if (bss != NULL) {
 			memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor));
-			ret = lbs_associate(priv, assoc_req);
+			ret = lbs_try_associate(priv, assoc_req);
 		} else {
 			lbs_deb_assoc("SSID not found; cannot associate\n");
 		}
@@ -772,8 +1132,9 @@ static int assoc_helper_bssid(struct lbs_private *priv,
 
 	memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor));
 	if (assoc_req->mode == IW_MODE_INFRA) {
-		ret = lbs_associate(priv, assoc_req);
-		lbs_deb_assoc("ASSOC: lbs_associate(bssid) returned %d\n", ret);
+		ret = lbs_try_associate(priv, assoc_req);
+		lbs_deb_assoc("ASSOC: lbs_try_associate(bssid) returned %d\n",
+			      ret);
 	} else if (assoc_req->mode == IW_MODE_ADHOC) {
 		lbs_adhoc_join(priv, assoc_req);
 	}
@@ -1467,57 +1828,6 @@ struct assoc_request *lbs_get_association_request(struct lbs_private *priv)
 
 
 /**
- *  @brief This function prepares command of authenticate.
- *
- *  @param priv      A pointer to struct lbs_private structure
- *  @param cmd       A pointer to cmd_ds_command structure
- *  @param pdata_buf Void cast of pointer to a BSSID to authenticate with
- *
- *  @return         0 or -1
- */
-int lbs_cmd_80211_authenticate(struct lbs_private *priv,
-				 struct cmd_ds_command *cmd,
-				 void *pdata_buf)
-{
-	struct cmd_ds_802_11_authenticate *pauthenticate = &cmd->params.auth;
-	int ret = -1;
-	u8 *bssid = pdata_buf;
-
-	lbs_deb_enter(LBS_DEB_JOIN);
-
-	cmd->command = cpu_to_le16(CMD_802_11_AUTHENTICATE);
-	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate)
-			+ S_DS_GEN);
-
-	/* translate auth mode to 802.11 defined wire value */
-	switch (priv->secinfo.auth_mode) {
-	case IW_AUTH_ALG_OPEN_SYSTEM:
-		pauthenticate->authtype = 0x00;
-		break;
-	case IW_AUTH_ALG_SHARED_KEY:
-		pauthenticate->authtype = 0x01;
-		break;
-	case IW_AUTH_ALG_LEAP:
-		pauthenticate->authtype = 0x80;
-		break;
-	default:
-		lbs_deb_join("AUTH_CMD: invalid auth alg 0x%X\n",
-			priv->secinfo.auth_mode);
-		goto out;
-	}
-
-	memcpy(pauthenticate->macaddr, bssid, ETH_ALEN);
-
-	lbs_deb_join("AUTH_CMD: BSSID %pM, auth 0x%x\n",
-		bssid, pauthenticate->authtype);
-	ret = 0;
-
-out:
-	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
-	return ret;
-}
-
-/**
  *  @brief Deauthenticate from a specific BSS
  *
  *  @param priv        A pointer to struct lbs_private structure
@@ -1550,285 +1860,3 @@ int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, u8 bssid[ETH_ALEN],
 	return ret;
 }
 
-int lbs_cmd_80211_associate(struct lbs_private *priv,
-			      struct cmd_ds_command *cmd, void *pdata_buf)
-{
-	struct cmd_ds_802_11_associate *passo = &cmd->params.associate;
-	int ret = 0;
-	struct assoc_request *assoc_req = pdata_buf;
-	struct bss_descriptor *bss = &assoc_req->bss;
-	u8 *pos;
-	u16 tmpcap, tmplen;
-	struct mrvlietypes_ssidparamset *ssid;
-	struct mrvlietypes_phyparamset *phy;
-	struct mrvlietypes_ssparamset *ss;
-	struct mrvlietypes_ratesparamset *rates;
-	struct mrvlietypes_rsnparamset *rsn;
-
-	lbs_deb_enter(LBS_DEB_ASSOC);
-
-	pos = (u8 *) passo;
-
-	if (!priv) {
-		ret = -1;
-		goto done;
-	}
-
-	cmd->command = cpu_to_le16(CMD_802_11_ASSOCIATE);
-
-	memcpy(passo->peerstaaddr, bss->bssid, sizeof(passo->peerstaaddr));
-	pos += sizeof(passo->peerstaaddr);
-
-	/* set the listen interval */
-	passo->listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL);
-
-	pos += sizeof(passo->capability);
-	pos += sizeof(passo->listeninterval);
-	pos += sizeof(passo->bcnperiod);
-	pos += sizeof(passo->dtimperiod);
-
-	ssid = (struct mrvlietypes_ssidparamset *) pos;
-	ssid->header.type = cpu_to_le16(TLV_TYPE_SSID);
-	tmplen = bss->ssid_len;
-	ssid->header.len = cpu_to_le16(tmplen);
-	memcpy(ssid->ssid, bss->ssid, tmplen);
-	pos += sizeof(ssid->header) + tmplen;
-
-	phy = (struct mrvlietypes_phyparamset *) pos;
-	phy->header.type = cpu_to_le16(TLV_TYPE_PHY_DS);
-	tmplen = sizeof(phy->fh_ds.dsparamset);
-	phy->header.len = cpu_to_le16(tmplen);
-	memcpy(&phy->fh_ds.dsparamset,
-	       &bss->phyparamset.dsparamset.currentchan,
-	       tmplen);
-	pos += sizeof(phy->header) + tmplen;
-
-	ss = (struct mrvlietypes_ssparamset *) pos;
-	ss->header.type = cpu_to_le16(TLV_TYPE_CF);
-	tmplen = sizeof(ss->cf_ibss.cfparamset);
-	ss->header.len = cpu_to_le16(tmplen);
-	pos += sizeof(ss->header) + tmplen;
-
-	rates = (struct mrvlietypes_ratesparamset *) pos;
-	rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
-	memcpy(&rates->rates, &bss->rates, MAX_RATES);
-	tmplen = MAX_RATES;
-	if (get_common_rates(priv, rates->rates, &tmplen)) {
-		ret = -1;
-		goto done;
-	}
-	pos += sizeof(rates->header) + tmplen;
-	rates->header.len = cpu_to_le16(tmplen);
-	lbs_deb_assoc("ASSOC_CMD: num rates %u\n", tmplen);
-
-	/* Copy the infra. association rates into Current BSS state structure */
-	memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates));
-	memcpy(&priv->curbssparams.rates, &rates->rates, tmplen);
-
-	/* Set MSB on basic rates as the firmware requires, but _after_
-	 * copying to current bss rates.
-	 */
-	lbs_set_basic_rate_flags(rates->rates, tmplen);
-
-	if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) {
-		rsn = (struct mrvlietypes_rsnparamset *) pos;
-		/* WPA_IE or WPA2_IE */
-		rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]);
-		tmplen = (u16) assoc_req->wpa_ie[1];
-		rsn->header.len = cpu_to_le16(tmplen);
-		memcpy(rsn->rsnie, &assoc_req->wpa_ie[2], tmplen);
-		lbs_deb_hex(LBS_DEB_JOIN, "ASSOC_CMD: RSN IE", (u8 *) rsn,
-			sizeof(rsn->header) + tmplen);
-		pos += sizeof(rsn->header) + tmplen;
-	}
-
-	/* update curbssparams */
-	priv->curbssparams.channel = bss->phyparamset.dsparamset.currentchan;
-
-	if (lbs_parse_dnld_countryinfo_11d(priv, bss)) {
-		ret = -1;
-		goto done;
-	}
-
-	cmd->size = cpu_to_le16((u16) (pos - (u8 *) passo) + S_DS_GEN);
-
-	/* set the capability info */
-	tmpcap = (bss->capability & CAPINFO_MASK);
-	if (bss->mode == IW_MODE_INFRA)
-		tmpcap |= WLAN_CAPABILITY_ESS;
-	passo->capability = cpu_to_le16(tmpcap);
-	lbs_deb_assoc("ASSOC_CMD: capability 0x%04x\n", tmpcap);
-
-done:
-	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
-	return ret;
-}
-
-int lbs_ret_80211_associate(struct lbs_private *priv,
-			      struct cmd_ds_command *resp)
-{
-	int ret = 0;
-	union iwreq_data wrqu;
-	struct ieeetypes_assocrsp *passocrsp;
-	struct bss_descriptor *bss;
-	u16 status_code;
-
-	lbs_deb_enter(LBS_DEB_ASSOC);
-
-	if (!priv->in_progress_assoc_req) {
-		lbs_deb_assoc("ASSOC_RESP: no in-progress assoc request\n");
-		ret = -1;
-		goto done;
-	}
-	bss = &priv->in_progress_assoc_req->bss;
-
-	passocrsp = (struct ieeetypes_assocrsp *) &resp->params;
-
-	/*
-	 * Older FW versions map the IEEE 802.11 Status Code in the association
-	 * response to the following values returned in passocrsp->statuscode:
-	 *
-	 *    IEEE Status Code                Marvell Status Code
-	 *    0                       ->      0x0000 ASSOC_RESULT_SUCCESS
-	 *    13                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
-	 *    14                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
-	 *    15                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
-	 *    16                      ->      0x0004 ASSOC_RESULT_AUTH_REFUSED
-	 *    others                  ->      0x0003 ASSOC_RESULT_REFUSED
-	 *
-	 * Other response codes:
-	 *    0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
-	 *    0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
-	 *                                    association response from the AP)
-	 */
-
-	status_code = le16_to_cpu(passocrsp->statuscode);
-	switch (status_code) {
-	case 0x00:
-		break;
-	case 0x01:
-		lbs_deb_assoc("ASSOC_RESP: invalid parameters\n");
-		break;
-	case 0x02:
-		lbs_deb_assoc("ASSOC_RESP: internal timer "
-			"expired while waiting for the AP\n");
-		break;
-	case 0x03:
-		lbs_deb_assoc("ASSOC_RESP: association "
-			"refused by AP\n");
-		break;
-	case 0x04:
-		lbs_deb_assoc("ASSOC_RESP: authentication "
-			"refused by AP\n");
-		break;
-	default:
-		lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x "
-			" unknown\n", status_code);
-		break;
-	}
-
-	if (status_code) {
-		lbs_mac_event_disconnected(priv);
-		ret = -1;
-		goto done;
-	}
-
-	lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_RESP", (void *)&resp->params,
-		le16_to_cpu(resp->size) - S_DS_GEN);
-
-	/* Send a Media Connected event, according to the Spec */
-	priv->connect_status = LBS_CONNECTED;
-
-	/* Update current SSID and BSSID */
-	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
-	priv->curbssparams.ssid_len = bss->ssid_len;
-	memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
-
-	priv->SNR[TYPE_RXPD][TYPE_AVG] = 0;
-	priv->NF[TYPE_RXPD][TYPE_AVG] = 0;
-
-	memset(priv->rawSNR, 0x00, sizeof(priv->rawSNR));
-	memset(priv->rawNF, 0x00, sizeof(priv->rawNF));
-	priv->nextSNRNF = 0;
-	priv->numSNRNF = 0;
-
-	netif_carrier_on(priv->dev);
-	if (!priv->tx_pending_len)
-		netif_wake_queue(priv->dev);
-
-	memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
-
-done:
-	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
-	return ret;
-}
-
-static int lbs_adhoc_post(struct lbs_private *priv, struct cmd_header *resp)
-{
-	int ret = 0;
-	u16 command = le16_to_cpu(resp->command);
-	u16 result = le16_to_cpu(resp->result);
-	struct cmd_ds_802_11_ad_hoc_result *adhoc_resp;
-	union iwreq_data wrqu;
-	struct bss_descriptor *bss;
-	DECLARE_SSID_BUF(ssid);
-
-	lbs_deb_enter(LBS_DEB_JOIN);
-
-	adhoc_resp = (struct cmd_ds_802_11_ad_hoc_result *) resp;
-
-	if (!priv->in_progress_assoc_req) {
-		lbs_deb_join("ADHOC_RESP: no in-progress association "
-			"request\n");
-		ret = -1;
-		goto done;
-	}
-	bss = &priv->in_progress_assoc_req->bss;
-
-	/*
-	 * Join result code 0 --> SUCCESS
-	 */
-	if (result) {
-		lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result);
-		if (priv->connect_status == LBS_CONNECTED)
-			lbs_mac_event_disconnected(priv);
-		ret = -1;
-		goto done;
-	}
-
-	/* Send a Media Connected event, according to the Spec */
-	priv->connect_status = LBS_CONNECTED;
-
-	if (command == CMD_RET(CMD_802_11_AD_HOC_START)) {
-		/* Update the created network descriptor with the new BSSID */
-		memcpy(bss->bssid, adhoc_resp->bssid, ETH_ALEN);
-	}
-
-	/* Set the BSSID from the joined/started descriptor */
-	memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
-
-	/* Set the new SSID to current SSID */
-	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
-	priv->curbssparams.ssid_len = bss->ssid_len;
-
-	netif_carrier_on(priv->dev);
-	if (!priv->tx_pending_len)
-		netif_wake_queue(priv->dev);
-
-	memset(&wrqu, 0, sizeof(wrqu));
-	memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
-
-	lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n",
-		     print_ssid(ssid, bss->ssid, bss->ssid_len),
-		     priv->curbssparams.bssid,
-		     priv->curbssparams.channel);
-
-done:
-	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
-	return ret;
-}
-
diff --git a/drivers/net/wireless/libertas/assoc.h b/drivers/net/wireless/libertas/assoc.h
index 8b7336dd02a..6e765e9f91a 100644
--- a/drivers/net/wireless/libertas/assoc.h
+++ b/drivers/net/wireless/libertas/assoc.h
@@ -8,22 +8,9 @@
 void lbs_association_worker(struct work_struct *work);
 struct assoc_request *lbs_get_association_request(struct lbs_private *priv);
 
-struct cmd_ds_command;
-int lbs_cmd_80211_authenticate(struct lbs_private *priv,
-					struct cmd_ds_command *cmd,
-					void *pdata_buf);
-
 int lbs_adhoc_stop(struct lbs_private *priv);
 
 int lbs_cmd_80211_deauthenticate(struct lbs_private *priv,
 				 u8 bssid[ETH_ALEN], u16 reason);
-int lbs_cmd_80211_associate(struct lbs_private *priv,
-				     struct cmd_ds_command *cmd,
-				     void *pdata_buf);
-
-int lbs_ret_80211_ad_hoc_start(struct lbs_private *priv,
-					struct cmd_ds_command *resp);
-int lbs_ret_80211_associate(struct lbs_private *priv,
-				     struct cmd_ds_command *resp);
 
 #endif /* _LBS_ASSOC_H */
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 8c3605cdc64..01db705a38e 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -119,6 +119,19 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n",
 		    cmd.hwifversion, cmd.version);
 
+	/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
+	/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
+	/* 5.110.22 have mesh command with 0xa3 command id */
+	/* 10.0.0.p0 FW brings in mesh config command with different id */
+	/* Check FW version MSB and initialize mesh_fw_ver */
+	if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5)
+		priv->mesh_fw_ver = MESH_FW_OLD;
+	else if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
+		(priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK))
+		priv->mesh_fw_ver = MESH_FW_NEW;
+	else
+		priv->mesh_fw_ver = MESH_NONE;
+
 	/* Clamp region code to 8-bit since FW spec indicates that it should
 	 * only ever be 8-bit, even though the field size is 16-bit.  Some firmware
 	 * returns non-zero high 8 bits here.
@@ -1036,17 +1049,26 @@ static int __lbs_mesh_config_send(struct lbs_private *priv,
 				  uint16_t action, uint16_t type)
 {
 	int ret;
+	u16 command = CMD_MESH_CONFIG_OLD;
 
 	lbs_deb_enter(LBS_DEB_CMD);
 
-	cmd->hdr.command = cpu_to_le16(CMD_MESH_CONFIG);
+	/*
+	 * Command id is 0xac for v10 FW along with mesh interface
+	 * id in bits 14-13-12.
+	 */
+	if (priv->mesh_fw_ver == MESH_FW_NEW)
+		command = CMD_MESH_CONFIG |
+			  (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
+
+	cmd->hdr.command = cpu_to_le16(command);
 	cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
 	cmd->hdr.result = 0;
 
 	cmd->type = cpu_to_le16(type);
 	cmd->action = cpu_to_le16(action);
 
-	ret = lbs_cmd_with_response(priv, CMD_MESH_CONFIG, cmd);
+	ret = lbs_cmd_with_response(priv, command, cmd);
 
 	lbs_deb_leave(LBS_DEB_CMD);
 	return ret;
@@ -1198,8 +1220,7 @@ static void lbs_submit_command(struct lbs_private *priv,
 	command = le16_to_cpu(cmd->command);
 
 	/* These commands take longer */
-	if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE ||
-	    command == CMD_802_11_AUTHENTICATE)
+	if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE)
 		timeo = 5 * HZ;
 
 	lbs_deb_cmd("DNLD_CMD: command 0x%04x, seq %d, size %d\n",
@@ -1393,15 +1414,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
 		ret = lbs_cmd_802_11_ps_mode(cmdptr, cmd_action);
 		break;
 
-	case CMD_802_11_ASSOCIATE:
-	case CMD_802_11_REASSOCIATE:
-		ret = lbs_cmd_80211_associate(priv, cmdptr, pdata_buf);
-		break;
-
-	case CMD_802_11_AUTHENTICATE:
-		ret = lbs_cmd_80211_authenticate(priv, cmdptr, pdata_buf);
-		break;
-
 	case CMD_MAC_REG_ACCESS:
 	case CMD_BBP_REG_ACCESS:
 	case CMD_RF_REG_ACCESS:
@@ -1448,8 +1460,8 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
 		break;
 	case CMD_802_11_LED_GPIO_CTRL:
 		{
-			struct mrvlietypes_ledgpio *gpio =
-			    (struct mrvlietypes_ledgpio*)
+			struct mrvl_ie_ledgpio *gpio =
+			    (struct mrvl_ie_ledgpio*)
 			    cmdptr->params.ledgpio.data;
 
 			memmove(&cmdptr->params.ledgpio,
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index bcf2a9756fb..c42d3faa266 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -5,7 +5,7 @@
 #include <linux/delay.h>
 #include <linux/if_arp.h>
 #include <linux/netdevice.h>
-
+#include <asm/unaligned.h>
 #include <net/iw_handler.h>
 
 #include "host.h"
@@ -154,11 +154,11 @@ static int lbs_ret_802_11_rssi(struct lbs_private *priv,
 	lbs_deb_enter(LBS_DEB_CMD);
 
 	/* store the non average value */
-	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = le16_to_cpu(rssirsp->SNR);
-	priv->NF[TYPE_BEACON][TYPE_NOAVG] = le16_to_cpu(rssirsp->noisefloor);
+	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->SNR);
+	priv->NF[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->noisefloor);
 
-	priv->SNR[TYPE_BEACON][TYPE_AVG] = le16_to_cpu(rssirsp->avgSNR);
-	priv->NF[TYPE_BEACON][TYPE_AVG] = le16_to_cpu(rssirsp->avgnoisefloor);
+	priv->SNR[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgSNR);
+	priv->NF[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgnoisefloor);
 
 	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] =
 	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_NOAVG],
@@ -210,12 +210,6 @@ static inline int handle_cmd_response(struct lbs_private *priv,
 		ret = lbs_ret_reg_access(priv, respcmd, resp);
 		break;
 
-	case CMD_RET_802_11_ASSOCIATE:
-	case CMD_RET(CMD_802_11_ASSOCIATE):
-	case CMD_RET(CMD_802_11_REASSOCIATE):
-		ret = lbs_ret_80211_associate(priv, resp);
-		break;
-
 	case CMD_RET(CMD_802_11_SET_AFC):
 	case CMD_RET(CMD_802_11_GET_AFC):
 		spin_lock_irqsave(&priv->driver_lock, flags);
@@ -225,7 +219,6 @@ static inline int handle_cmd_response(struct lbs_private *priv,
 
 		break;
 
-	case CMD_RET(CMD_802_11_AUTHENTICATE):
 	case CMD_RET(CMD_802_11_BEACON_STOP):
 		break;
 
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 50e28a0cdfe..811ffc3ef41 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -183,12 +183,12 @@ out_unlock:
  */
 static void *lbs_tlv_find(uint16_t tlv_type, const uint8_t *tlv, uint16_t size)
 {
-	struct mrvlietypesheader *tlv_h;
+	struct mrvl_ie_header *tlv_h;
 	uint16_t length;
 	ssize_t pos = 0;
 
 	while (pos < size) {
-		tlv_h = (struct mrvlietypesheader *) tlv;
+		tlv_h = (struct mrvl_ie_header *) tlv;
 		if (!tlv_h->len)
 			return NULL;
 		if (tlv_h->type == cpu_to_le16(tlv_type))
@@ -206,7 +206,7 @@ static ssize_t lbs_threshold_read(uint16_t tlv_type, uint16_t event_mask,
 				  size_t count, loff_t *ppos)
 {
 	struct cmd_ds_802_11_subscribe_event *subscribed;
-	struct mrvlietypes_thresholds *got;
+	struct mrvl_ie_thresholds *got;
 	struct lbs_private *priv = file->private_data;
 	ssize_t ret = 0;
 	size_t pos = 0;
@@ -259,7 +259,7 @@ static ssize_t lbs_threshold_write(uint16_t tlv_type, uint16_t event_mask,
 				   loff_t *ppos)
 {
 	struct cmd_ds_802_11_subscribe_event *events;
-	struct mrvlietypes_thresholds *tlv;
+	struct mrvl_ie_thresholds *tlv;
 	struct lbs_private *priv = file->private_data;
 	ssize_t buf_size;
 	int value, freq, new_mask;
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index e8dfde39abf..48da157d6cd 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -227,6 +227,20 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
 #define TxPD_CONTROL_WDS_FRAME (1<<17)
 #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
 
+/** Mesh interface ID */
+#define MESH_IFACE_ID					0x0001
+/** Mesh id should be in bits 14-13-12 */
+#define MESH_IFACE_BIT_OFFSET				0x000c
+/** Mesh enable bit in FW capability */
+#define MESH_CAPINFO_ENABLE_MASK			(1<<16)
+
+/** FW definition from Marvell v5 */
+#define MRVL_FW_V5					(0x05)
+/** FW definition from Marvell v10 */
+#define MRVL_FW_V10					(0x0a)
+/** FW major revision definition */
+#define MRVL_FW_MAJOR_REV(x)				((x)>>24)
+
 /** RxPD status */
 
 #define MRVDRV_RXPD_STATUS_OK                0x0001
@@ -380,6 +394,13 @@ enum KEY_INFO_WPA {
 	KEY_INFO_WPA_ENABLED = 0x04
 };
 
+/** mesh_fw_ver */
+enum _mesh_fw_ver {
+	MESH_NONE = 0, /* MESH is not supported */
+	MESH_FW_OLD,   /* MESH is supported in FW V5 */
+	MESH_FW_NEW,   /* MESH is supported in FW V10 and newer */
+};
+
 /* Default values for fwt commands. */
 #define FWT_DEFAULT_METRIC 0
 #define FWT_DEFAULT_DIR 1
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index 27e81fd97c9..f9ec69e0473 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -101,6 +101,7 @@ struct lbs_mesh_stats {
 /** Private structure for the MV device */
 struct lbs_private {
 	int mesh_open;
+	int mesh_fw_ver;
 	int infra_open;
 	int mesh_autostart_enabled;
 
@@ -337,7 +338,7 @@ struct bss_descriptor {
 	u32 rssi;
 	u32 channel;
 	u16 beaconperiod;
-	u32 atimwindow;
+	__le16 atimwindow;
 
 	/* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
 	u8 mode;
@@ -347,10 +348,10 @@ struct bss_descriptor {
 
 	unsigned long last_scanned;
 
-	union ieeetypes_phyparamset phyparamset;
-	union IEEEtypes_ssparamset ssparamset;
+	union ieee_phy_param_set phy;
+	union ieee_ss_param_set ss;
 
-	struct ieeetypes_countryinfofullset countryinfo;
+	struct ieee_ie_country_info_full_set countryinfo;
 
 	u8 wpa_ie[MAX_WPA_IE_LEN];
 	size_t wpa_ie_len;
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index d4457ef808a..fe8f0cb737b 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -83,8 +83,11 @@
 #define CMD_FWT_ACCESS				0x0095
 #define CMD_802_11_MONITOR_MODE			0x0098
 #define CMD_MESH_ACCESS				0x009b
-#define CMD_MESH_CONFIG				0x00a3
+#define CMD_MESH_CONFIG_OLD			0x00a3
+#define CMD_MESH_CONFIG				0x00ac
 #define	CMD_SET_BOOT2_VER			0x00a5
+#define	CMD_FUNC_INIT				0x00a9
+#define	CMD_FUNC_SHUTDOWN			0x00aa
 #define CMD_802_11_BEACON_CTRL			0x00b0
 
 /* For the IEEE Power Save */
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
index a899aeb676b..0a2e29140ad 100644
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ b/drivers/net/wireless/libertas/hostcmd.h
@@ -13,8 +13,19 @@
 
 /* TxPD descriptor */
 struct txpd {
-	/* Current Tx packet status */
-	__le32 tx_status;
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Tx packet status */
+		__le32 tx_status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+			/* Reserved */
+			__le16 reserved;
+		} bss;
+	} u;
 	/* Tx control */
 	__le32 tx_control;
 	__le32 tx_packet_location;
@@ -36,8 +47,17 @@ struct txpd {
 
 /* RxPD Descriptor */
 struct rxpd {
-	/* Current Rx packet status */
-	__le16 status;
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Rx packet status */
+		__le16 status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+		} bss;
+	} u;
 
 	/* SNR */
 	u8 snr;
@@ -230,7 +250,9 @@ struct cmd_ds_gspi_bus_config {
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11_authenticate {
-	u8 macaddr[ETH_ALEN];
+	struct cmd_header hdr;
+
+	u8 bssid[ETH_ALEN];
 	u8 authtype;
 	u8 reserved[10];
 } __attribute__ ((packed));
@@ -243,22 +265,23 @@ struct cmd_ds_802_11_deauthenticate {
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11_associate {
-	u8 peerstaaddr[6];
+	struct cmd_header hdr;
+
+	u8 bssid[6];
 	__le16 capability;
 	__le16 listeninterval;
 	__le16 bcnperiod;
 	u8 dtimperiod;
-
-#if 0
-	mrvlietypes_ssidparamset_t ssidParamSet;
-	mrvlietypes_phyparamset_t phyparamset;
-	mrvlietypes_ssparamset_t ssparamset;
-	mrvlietypes_ratesparamset_t ratesParamSet;
-#endif
+	u8 iebuf[512];    /* Enough for required and most optional IEs */
 } __attribute__ ((packed));
 
-struct cmd_ds_802_11_associate_rsp {
-	struct ieeetypes_assocrsp assocRsp;
+struct cmd_ds_802_11_associate_response {
+	struct cmd_header hdr;
+
+	__le16 capability;
+	__le16 statuscode;
+	__le16 aid;
+	u8 iebuf[512];
 } __attribute__ ((packed));
 
 struct cmd_ds_802_11_set_wep {
@@ -515,9 +538,11 @@ struct cmd_ds_802_11_ad_hoc_start {
 	u8 bsstype;
 	__le16 beaconperiod;
 	u8 dtimperiod;   /* Reserved on v9 and later */
-	union IEEEtypes_ssparamset ssparamset;
-	union ieeetypes_phyparamset phyparamset;
-	__le16 probedelay;
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved1[4];
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved2[4];
+	__le16 probedelay;  /* Reserved on v9 and later */
 	__le16 capability;
 	u8 rates[MAX_RATES];
 	u8 tlv_memory_size_pad[100];
@@ -538,8 +563,10 @@ struct adhoc_bssdesc {
 	u8 dtimperiod;
 	__le64 timestamp;
 	__le64 localtime;
-	union ieeetypes_phyparamset phyparamset;
-	union IEEEtypes_ssparamset ssparamset;
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved1[4];
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved2[4];
 	__le16 capability;
 	u8 rates[MAX_RATES];
 
@@ -745,8 +772,6 @@ struct cmd_ds_command {
 	/* command Body */
 	union {
 		struct cmd_ds_802_11_ps_mode psmode;
-		struct cmd_ds_802_11_associate associate;
-		struct cmd_ds_802_11_authenticate auth;
 		struct cmd_ds_802_11_get_stat gstat;
 		struct cmd_ds_802_3_get_stat gstat_8023;
 		struct cmd_ds_802_11_rf_antenna rant;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index cedeac6322f..2a5b083bf9b 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -273,7 +273,28 @@ static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 r
  */
 #define IF_CS_PRODUCT_ID		0x0000001C
 #define IF_CS_CF8385_B1_REV		0x12
+#define IF_CS_CF8381_B3_REV		0x04
 
+/*
+ * Used to detect other cards than CF8385 since their revisions of silicon
+ * doesn't match those from CF8385, eg. CF8381 B3 works with this driver.
+ */
+#define CF8381_MANFID		0x02db
+#define CF8381_CARDID		0x6064
+#define CF8385_MANFID		0x02df
+#define CF8385_CARDID		0x8103
+
+static inline int if_cs_hw_is_cf8381(struct pcmcia_device *p_dev)
+{
+	return (p_dev->manf_id == CF8381_MANFID &&
+		p_dev->card_id == CF8381_CARDID);
+}
+
+static inline int if_cs_hw_is_cf8385(struct pcmcia_device *p_dev)
+{
+	return (p_dev->manf_id == CF8385_MANFID &&
+		p_dev->card_id == CF8385_CARDID);
+}
 
 /********************************************************************/
 /* I/O and interrupt handling                                       */
@@ -757,6 +778,7 @@ static void if_cs_release(struct pcmcia_device *p_dev)
 static int if_cs_probe(struct pcmcia_device *p_dev)
 {
 	int ret = -ENOMEM;
+	unsigned int prod_id;
 	struct lbs_private *priv;
 	struct if_cs_card *card;
 	/* CIS parsing */
@@ -859,7 +881,14 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	       p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
 
 	/* Check if we have a current silicon */
-	if (if_cs_read8(card, IF_CS_PRODUCT_ID) < IF_CS_CF8385_B1_REV) {
+	prod_id = if_cs_read8(card, IF_CS_PRODUCT_ID);
+	if (if_cs_hw_is_cf8381(p_dev) && prod_id < IF_CS_CF8381_B3_REV) {
+		lbs_pr_err("old chips like 8381 rev B3 aren't supported\n");
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	if (if_cs_hw_is_cf8385(p_dev) && prod_id < IF_CS_CF8385_B1_REV) {
 		lbs_pr_err("old chips like 8385 rev B1 aren't supported\n");
 		ret = -ENODEV;
 		goto out2;
@@ -950,7 +979,8 @@ static void if_cs_detach(struct pcmcia_device *p_dev)
 /********************************************************************/
 
 static struct pcmcia_device_id if_cs_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
+	PCMCIA_DEVICE_MANF_CARD(CF8381_MANFID, CF8381_CARDID),
+	PCMCIA_DEVICE_MANF_CARD(CF8385_MANFID, CF8385_CARDID),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 76f4c653d64..8cdb88c6ca2 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -39,8 +39,24 @@
 #include "decl.h"
 #include "defs.h"
 #include "dev.h"
+#include "cmd.h"
 #include "if_sdio.h"
 
+/* The if_sdio_remove() callback function is called when
+ * user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently for SD8688 combo chip.
+ * If the user is removing the module, the FUNC_SHUTDOWN
+ * command for SD8688 is sent to the firmware.
+ * If the card is removed, there is no need to send this command.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+
 static char *lbs_helper_name = NULL;
 module_param_named(helper_name, lbs_helper_name, charp, 0644);
 
@@ -48,8 +64,11 @@ static char *lbs_fw_name = NULL;
 module_param_named(fw_name, lbs_fw_name, charp, 0644);
 
 static const struct sdio_device_id if_sdio_ids[] = {
-	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
-	{ /* end: all zeroes */						},
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
+			SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
+			SDIO_DEVICE_ID_MARVELL_8688WLAN) },
+	{ /* end: all zeroes */				},
 };
 
 MODULE_DEVICE_TABLE(sdio, if_sdio_ids);
@@ -63,16 +82,22 @@ struct if_sdio_model {
 static struct if_sdio_model if_sdio_models[] = {
 	{
 		/* 8385 */
-		.model = 0x04,
+		.model = IF_SDIO_MODEL_8385,
 		.helper = "sd8385_helper.bin",
 		.firmware = "sd8385.bin",
 	},
 	{
 		/* 8686 */
-		.model = 0x0B,
+		.model = IF_SDIO_MODEL_8686,
 		.helper = "sd8686_helper.bin",
 		.firmware = "sd8686.bin",
 	},
+	{
+		/* 8688 */
+		.model = IF_SDIO_MODEL_8688,
+		.helper = "sd8688_helper.bin",
+		.firmware = "sd8688.bin",
+	},
 };
 
 struct if_sdio_packet {
@@ -87,6 +112,7 @@ struct if_sdio_card {
 
 	int			model;
 	unsigned long		ioport;
+	unsigned int		scratch_reg;
 
 	const char		*helper;
 	const char		*firmware;
@@ -98,25 +124,29 @@ struct if_sdio_card {
 
 	struct workqueue_struct	*workqueue;
 	struct work_struct	packet_worker;
+
+	u8			rx_unit;
 };
 
 /********************************************************************/
 /* I/O                                                              */
 /********************************************************************/
 
+/*
+ *  For SD8385/SD8686, this function reads firmware status after
+ *  the image is downloaded, or reads RX packet length when
+ *  interrupt (with IF_SDIO_H_INT_UPLD bit set) is received.
+ *  For SD8688, this function reads firmware status only.
+ */
 static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
 {
-	int ret, reg;
+	int ret;
 	u16 scratch;
 
-	if (card->model == 0x04)
-		reg = IF_SDIO_SCRATCH_OLD;
-	else
-		reg = IF_SDIO_SCRATCH;
-
-	scratch = sdio_readb(card->func, reg, &ret);
+	scratch = sdio_readb(card->func, card->scratch_reg, &ret);
 	if (!ret)
-		scratch |= sdio_readb(card->func, reg + 1, &ret) << 8;
+		scratch |= sdio_readb(card->func, card->scratch_reg + 1,
+					&ret) << 8;
 
 	if (err)
 		*err = ret;
@@ -127,6 +157,46 @@ static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
 	return scratch;
 }
 
+static u8 if_sdio_read_rx_unit(struct if_sdio_card *card)
+{
+	int ret;
+	u8 rx_unit;
+
+	rx_unit = sdio_readb(card->func, IF_SDIO_RX_UNIT, &ret);
+
+	if (ret)
+		rx_unit = 0;
+
+	return rx_unit;
+}
+
+static u16 if_sdio_read_rx_len(struct if_sdio_card *card, int *err)
+{
+	int ret;
+	u16 rx_len;
+
+	switch (card->model) {
+	case IF_SDIO_MODEL_8385:
+	case IF_SDIO_MODEL_8686:
+		rx_len = if_sdio_read_scratch(card, &ret);
+		break;
+	case IF_SDIO_MODEL_8688:
+	default: /* for newer chipsets */
+		rx_len = sdio_readb(card->func, IF_SDIO_RX_LEN, &ret);
+		if (!ret)
+			rx_len <<= card->rx_unit;
+		else
+			rx_len = 0xffff;	/* invalid length */
+
+		break;
+	}
+
+	if (err)
+		*err = ret;
+
+	return rx_len;
+}
+
 static int if_sdio_handle_cmd(struct if_sdio_card *card,
 		u8 *buffer, unsigned size)
 {
@@ -207,7 +277,7 @@ static int if_sdio_handle_event(struct if_sdio_card *card,
 
 	lbs_deb_enter(LBS_DEB_SDIO);
 
-	if (card->model == 0x04) {
+	if (card->model == IF_SDIO_MODEL_8385) {
 		event = sdio_readb(card->func, IF_SDIO_EVENT, &ret);
 		if (ret)
 			goto out;
@@ -245,7 +315,7 @@ static int if_sdio_card_to_host(struct if_sdio_card *card)
 
 	lbs_deb_enter(LBS_DEB_SDIO);
 
-	size = if_sdio_read_scratch(card, &ret);
+	size = if_sdio_read_rx_len(card, &ret);
 	if (ret)
 		goto out;
 
@@ -488,7 +558,6 @@ static int if_sdio_prog_helper(struct if_sdio_card *card)
 	ret = 0;
 
 release:
-	sdio_set_block_size(card->func, 0);
 	sdio_release_host(card->func);
 	kfree(chunk_buffer);
 release_fw:
@@ -624,7 +693,6 @@ static int if_sdio_prog_real(struct if_sdio_card *card)
 	ret = 0;
 
 release:
-	sdio_set_block_size(card->func, 0);
 	sdio_release_host(card->func);
 	kfree(chunk_buffer);
 release_fw:
@@ -653,6 +721,8 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
 	if (ret)
 		goto out;
 
+	lbs_deb_sdio("firmware status = %#x\n", scratch);
+
 	if (scratch == IF_SDIO_FIRMWARE_OK) {
 		lbs_deb_sdio("firmware already loaded\n");
 		goto success;
@@ -667,6 +737,9 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
 		goto out;
 
 success:
+	sdio_claim_host(card->func);
+	sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
+	sdio_release_host(card->func);
 	ret = 0;
 
 out:
@@ -820,10 +893,10 @@ static int if_sdio_probe(struct sdio_func *func,
 		if (sscanf(func->card->info[i],
 				"ID: %x", &model) == 1)
 			break;
-               if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
-                       model = 4;
-                       break;
-               }
+		if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
+			model = IF_SDIO_MODEL_8385;
+			break;
+		}
 	}
 
 	if (i == func->card->num_info) {
@@ -837,6 +910,20 @@ static int if_sdio_probe(struct sdio_func *func,
 
 	card->func = func;
 	card->model = model;
+
+	switch (card->model) {
+	case IF_SDIO_MODEL_8385:
+		card->scratch_reg = IF_SDIO_SCRATCH_OLD;
+		break;
+	case IF_SDIO_MODEL_8686:
+		card->scratch_reg = IF_SDIO_SCRATCH;
+		break;
+	case IF_SDIO_MODEL_8688:
+	default: /* for newer chipsets */
+		card->scratch_reg = IF_SDIO_FW_STATUS;
+		break;
+	}
+
 	spin_lock_init(&card->lock);
 	card->workqueue = create_workqueue("libertas_sdio");
 	INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
@@ -914,15 +1001,40 @@ static int if_sdio_probe(struct sdio_func *func,
 
 	priv->fw_ready = 1;
 
+	sdio_claim_host(func);
+
+	/*
+	 * Get rx_unit if the chip is SD8688 or newer.
+	 * SD8385 & SD8686 do not have rx_unit.
+	 */
+	if ((card->model != IF_SDIO_MODEL_8385)
+			&& (card->model != IF_SDIO_MODEL_8686))
+		card->rx_unit = if_sdio_read_rx_unit(card);
+	else
+		card->rx_unit = 0;
+
 	/*
 	 * Enable interrupts now that everything is set up
 	 */
-	sdio_claim_host(func);
 	sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
 	sdio_release_host(func);
 	if (ret)
 		goto reclaim;
 
+	/*
+	 * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
+	 */
+	if (card->model == IF_SDIO_MODEL_8688) {
+		struct cmd_header cmd;
+
+		memset(&cmd, 0, sizeof(cmd));
+
+		lbs_deb_sdio("send function INIT command\n");
+		if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
+				lbs_cmd_copyback, (unsigned long) &cmd))
+			lbs_pr_alert("CMD_FUNC_INIT cmd failed\n");
+	}
+
 	ret = lbs_start_card(priv);
 	if (ret)
 		goto err_activate_card;
@@ -968,6 +1080,22 @@ static void if_sdio_remove(struct sdio_func *func)
 
 	card = sdio_get_drvdata(func);
 
+	if (user_rmmod && (card->model == IF_SDIO_MODEL_8688)) {
+		/*
+		 * FUNC_SHUTDOWN is required for SD8688 WLAN/BT
+		 * multiple functions
+		 */
+		struct cmd_header cmd;
+
+		memset(&cmd, 0, sizeof(cmd));
+
+		lbs_deb_sdio("send function SHUTDOWN command\n");
+		if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
+				&cmd, sizeof(cmd), lbs_cmd_copyback,
+				(unsigned long) &cmd))
+			lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
+	}
+
 	card->priv->surpriseremoved = 1;
 
 	lbs_deb_sdio("call remove card\n");
@@ -1015,6 +1143,9 @@ static int __init if_sdio_init_module(void)
 
 	ret = sdio_register_driver(&if_sdio_driver);
 
+	/* Clear the flag in case user removes the card. */
+	user_rmmod = 0;
+
 	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
 
 	return ret;
@@ -1024,6 +1155,9 @@ static void __exit if_sdio_exit_module(void)
 {
 	lbs_deb_enter(LBS_DEB_SDIO);
 
+	/* Set the flag as user is removing this module. */
+	user_rmmod = 1;
+
 	sdio_unregister_driver(&if_sdio_driver);
 
 	lbs_deb_leave(LBS_DEB_SDIO);
diff --git a/drivers/net/wireless/libertas/if_sdio.h b/drivers/net/wireless/libertas/if_sdio.h
index 533bdfbf5d2..60c9b2fcef0 100644
--- a/drivers/net/wireless/libertas/if_sdio.h
+++ b/drivers/net/wireless/libertas/if_sdio.h
@@ -12,6 +12,10 @@
 #ifndef _LBS_IF_SDIO_H
 #define _LBS_IF_SDIO_H
 
+#define IF_SDIO_MODEL_8385	0x04
+#define IF_SDIO_MODEL_8686	0x0b
+#define IF_SDIO_MODEL_8688	0x10
+
 #define IF_SDIO_IOPORT		0x00
 
 #define IF_SDIO_H_INT_MASK	0x04
@@ -38,8 +42,14 @@
 
 #define IF_SDIO_SCRATCH		0x34
 #define IF_SDIO_SCRATCH_OLD	0x80fe
+#define IF_SDIO_FW_STATUS	0x40
 #define   IF_SDIO_FIRMWARE_OK	0xfedc
 
+#define IF_SDIO_RX_LEN		0x42
+#define IF_SDIO_RX_UNIT		0x43
+
 #define IF_SDIO_EVENT           0x80fc
 
+#define IF_SDIO_BLOCK_SIZE	256
+
 #endif
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 07311e71af9..06a46d7b3d6 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -19,7 +19,6 @@
 
 #include <linux/moduleparam.h>
 #include <linux/firmware.h>
-#include <linux/gpio.h>
 #include <linux/jiffies.h>
 #include <linux/kthread.h>
 #include <linux/list.h>
@@ -44,20 +43,13 @@ struct if_spi_card {
 	struct lbs_private		*priv;
 	struct libertas_spi_platform_data *pdata;
 
-	char				helper_fw_name[FIRMWARE_NAME_MAX];
-	char				main_fw_name[FIRMWARE_NAME_MAX];
+	char				helper_fw_name[IF_SPI_FW_NAME_MAX];
+	char				main_fw_name[IF_SPI_FW_NAME_MAX];
 
 	/* The card ID and card revision, as reported by the hardware. */
 	u16				card_id;
 	u8				card_rev;
 
-	/* Pin number for our GPIO chip-select. */
-	/* TODO: Once the generic SPI layer has some additional features, we
-	 * should take this out and use the normal chip select here.
-	 * We need support for chip select delays, and not dropping chipselect
-	 * after each word. */
-	int				gpio_cs;
-
 	/* The last time that we initiated an SPU operation */
 	unsigned long			prev_xfer_time;
 
@@ -119,9 +111,6 @@ static struct chip_ident chip_id_to_device_name[] = {
  * First we have to put a SPU register name on the bus. Then we can
  * either read from or write to that register.
  *
- * For 16-bit transactions, byte order on the bus is big-endian.
- * We don't have to worry about that here, though.
- * The translation takes place in the SPI routines.
  */
 
 static void spu_transaction_init(struct if_spi_card *card)
@@ -133,12 +122,10 @@ static void spu_transaction_init(struct if_spi_card *card)
 		 * If not, we have to busy-wait to be on the safe side. */
 		ndelay(400);
 	}
-	gpio_set_value(card->gpio_cs, 0); /* assert CS */
 }
 
 static void spu_transaction_finish(struct if_spi_card *card)
 {
-	gpio_set_value(card->gpio_cs, 1); /* drop CS */
 	card->prev_xfer_time = jiffies;
 }
 
@@ -147,7 +134,14 @@ static void spu_transaction_finish(struct if_spi_card *card)
 static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
 {
 	int err = 0;
-	u16 reg_out = reg | IF_SPI_WRITE_OPERATION_MASK;
+	u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
+	struct spi_message m;
+	struct spi_transfer reg_trans;
+	struct spi_transfer data_trans;
+
+	spi_message_init(&m);
+	memset(&reg_trans, 0, sizeof(reg_trans));
+	memset(&data_trans, 0, sizeof(data_trans));
 
 	/* You must give an even number of bytes to the SPU, even if it
 	 * doesn't care about the last one.  */
@@ -156,29 +150,26 @@ static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
 	spu_transaction_init(card);
 
 	/* write SPU register index */
-	err = spi_write(card->spi, (u8 *)&reg_out, sizeof(u16));
-	if (err)
-		goto out;
+	reg_trans.tx_buf = &reg_out;
+	reg_trans.len = sizeof(reg_out);
 
-	err = spi_write(card->spi, buf, len);
+	data_trans.tx_buf = buf;
+	data_trans.len = len;
 
-out:
+	spi_message_add_tail(&reg_trans, &m);
+	spi_message_add_tail(&data_trans, &m);
+
+	err = spi_sync(card->spi, &m);
 	spu_transaction_finish(card);
 	return err;
 }
 
 static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val)
 {
-	return spu_write(card, reg, (u8 *)&val, sizeof(u16));
-}
+	u16 buff;
 
-static inline int spu_write_u32(struct if_spi_card *card, u16 reg, u32 val)
-{
-	/* The lower 16 bits are written first. */
-	u16 out[2];
-	out[0] = val & 0xffff;
-	out[1] = (val & 0xffff0000) >> 16;
-	return spu_write(card, reg, (u8 *)&out, sizeof(u32));
+	buff = cpu_to_le16(val);
+	return spu_write(card, reg, (u8 *)&buff, sizeof(u16));
 }
 
 static inline int spu_reg_is_port_reg(u16 reg)
@@ -195,10 +186,13 @@ static inline int spu_reg_is_port_reg(u16 reg)
 
 static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
 {
-	unsigned int i, delay;
+	unsigned int delay;
 	int err = 0;
-	u16 zero = 0;
-	u16 reg_out = reg | IF_SPI_READ_OPERATION_MASK;
+	u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
+	struct spi_message m;
+	struct spi_transfer reg_trans;
+	struct spi_transfer dummy_trans;
+	struct spi_transfer data_trans;
 
 	/* You must take an even number of bytes from the SPU, even if you
 	 * don't care about the last one.  */
@@ -206,29 +200,34 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
 
 	spu_transaction_init(card);
 
+	spi_message_init(&m);
+	memset(&reg_trans, 0, sizeof(reg_trans));
+	memset(&dummy_trans, 0, sizeof(dummy_trans));
+	memset(&data_trans, 0, sizeof(data_trans));
+
 	/* write SPU register index */
-	err = spi_write(card->spi, (u8 *)&reg_out, sizeof(u16));
-	if (err)
-		goto out;
+	reg_trans.tx_buf = &reg_out;
+	reg_trans.len = sizeof(reg_out);
+	spi_message_add_tail(&reg_trans, &m);
 
 	delay = spu_reg_is_port_reg(reg) ? card->spu_port_delay :
 						card->spu_reg_delay;
 	if (card->use_dummy_writes) {
 		/* Clock in dummy cycles while the SPU fills the FIFO */
-		for (i = 0; i < delay / 16; ++i) {
-			err = spi_write(card->spi, (u8 *)&zero, sizeof(u16));
-			if (err)
-				return err;
-		}
+		dummy_trans.len = delay / 8;
+		spi_message_add_tail(&dummy_trans, &m);
 	} else {
 		/* Busy-wait while the SPU fills the FIFO */
-		ndelay(100 + (delay * 10));
+		reg_trans.delay_usecs =
+			DIV_ROUND_UP((100 + (delay * 10)), 1000);
 	}
 
 	/* read in data */
-	err = spi_read(card->spi, buf, len);
+	data_trans.rx_buf = buf;
+	data_trans.len = len;
+	spi_message_add_tail(&data_trans, &m);
 
-out:
+	err = spi_sync(card->spi, &m);
 	spu_transaction_finish(card);
 	return err;
 }
@@ -236,18 +235,25 @@ out:
 /* Read 16 bits from an SPI register */
 static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val)
 {
-	return spu_read(card, reg, (u8 *)val, sizeof(u16));
+	u16 buf;
+	int ret;
+
+	ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
+	if (ret == 0)
+		*val = le16_to_cpup(&buf);
+	return ret;
 }
 
 /* Read 32 bits from an SPI register.
  * The low 16 bits are read first. */
 static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
 {
-	u16 buf[2];
+	u32 buf;
 	int err;
-	err = spu_read(card, reg, (u8 *)buf, sizeof(u32));
+
+	err = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
 	if (!err)
-		*val = buf[0] | (buf[1] << 16);
+		*val = le32_to_cpup(&buf);
 	return err;
 }
 
@@ -731,7 +737,7 @@ static int if_spi_c2h_data(struct if_spi_card *card)
 		goto out;
 	} else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
 		lbs_pr_err("%s: error: card has %d bytes of data, but "
-			   "our maximum skb size is %u\n",
+			   "our maximum skb size is %lu\n",
 			   __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
 		err = -EINVAL;
 		goto out;
@@ -814,6 +820,13 @@ static void if_spi_e2h(struct if_spi_card *card)
 	if (err)
 		goto out;
 
+	/* re-enable the card event interrupt */
+	spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG,
+			~IF_SPI_HICU_CARD_EVENT);
+
+	/* generate a card interrupt */
+	spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT);
+
 	spin_lock_irqsave(&priv->driver_lock, flags);
 	lbs_queue_event(priv, cause & 0xff);
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
@@ -1006,9 +1019,9 @@ static int if_spi_calculate_fw_names(u16 card_id,
 		lbs_pr_err("Unsupported chip_id: 0x%02x\n", card_id);
 		return -EAFNOSUPPORT;
 	}
-	snprintf(helper_fw, FIRMWARE_NAME_MAX, "libertas/gspi%d_hlp.bin",
+	snprintf(helper_fw, IF_SPI_FW_NAME_MAX, "libertas/gspi%d_hlp.bin",
 		 chip_id_to_device_name[i].name);
-	snprintf(main_fw, FIRMWARE_NAME_MAX, "libertas/gspi%d.bin",
+	snprintf(main_fw, IF_SPI_FW_NAME_MAX, "libertas/gspi%d.bin",
 		 chip_id_to_device_name[i].name);
 	return 0;
 }
@@ -1020,6 +1033,7 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 	struct libertas_spi_platform_data *pdata = spi->dev.platform_data;
 	int err = 0;
 	u32 scratch;
+	struct sched_param param = { .sched_priority = 1 };
 
 	lbs_deb_enter(LBS_DEB_SPI);
 
@@ -1043,7 +1057,6 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, card);
 	card->pdata = pdata;
 	card->spi = spi;
-	card->gpio_cs = pdata->gpio_cs;
 	card->prev_xfer_time = jiffies;
 
 	sema_init(&card->spi_ready, 0);
@@ -1052,26 +1065,18 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 	INIT_LIST_HEAD(&card->data_packet_list);
 	spin_lock_init(&card->buffer_lock);
 
-	/* set up GPIO CS line. TODO: use  regular CS line */
-	err = gpio_request(card->gpio_cs, "if_spi_gpio_chip_select");
-	if (err)
-		goto free_card;
-	err = gpio_direction_output(card->gpio_cs, 1);
-	if (err)
-		goto free_gpio;
-
 	/* Initialize the SPI Interface Unit */
 	err = spu_init(card, pdata->use_dummy_writes);
 	if (err)
-		goto free_gpio;
+		goto free_card;
 	err = spu_get_chip_revision(card, &card->card_id, &card->card_rev);
 	if (err)
-		goto free_gpio;
+		goto free_card;
 
 	/* Firmware load */
 	err = spu_read_u32(card, IF_SPI_SCRATCH_4_REG, &scratch);
 	if (err)
-		goto free_gpio;
+		goto free_card;
 	if (scratch == SUCCESSFUL_FW_DOWNLOAD_MAGIC)
 		lbs_deb_spi("Firmware is already loaded for "
 			    "Marvell WLAN 802.11 adapter\n");
@@ -1079,7 +1084,7 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 		err = if_spi_calculate_fw_names(card->card_id,
 				card->helper_fw_name, card->main_fw_name);
 		if (err)
-			goto free_gpio;
+			goto free_card;
 
 		lbs_deb_spi("Initializing FW for Marvell WLAN 802.11 adapter "
 				"(chip_id = 0x%04x, chip_rev = 0x%02x) "
@@ -1090,23 +1095,23 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 				spi->max_speed_hz);
 		err = if_spi_prog_helper_firmware(card);
 		if (err)
-			goto free_gpio;
+			goto free_card;
 		err = if_spi_prog_main_firmware(card);
 		if (err)
-			goto free_gpio;
+			goto free_card;
 		lbs_deb_spi("loaded FW for Marvell WLAN 802.11 adapter\n");
 	}
 
 	err = spu_set_interrupt_mode(card, 0, 1);
 	if (err)
-		goto free_gpio;
+		goto free_card;
 
 	/* Register our card with libertas.
 	 * This will call alloc_etherdev */
 	priv = lbs_add_card(card, &spi->dev);
 	if (!priv) {
 		err = -ENOMEM;
-		goto free_gpio;
+		goto free_card;
 	}
 	card->priv = priv;
 	priv->card = card;
@@ -1123,6 +1128,9 @@ static int __devinit if_spi_probe(struct spi_device *spi)
 		lbs_pr_err("error creating SPI thread: err=%d\n", err);
 		goto remove_card;
 	}
+	if (sched_setscheduler(card->spi_thread, SCHED_FIFO, &param))
+		lbs_pr_err("Error setting scheduler, using default.\n");
+
 	err = request_irq(spi->irq, if_spi_host_interrupt,
 			IRQF_TRIGGER_FALLING, "libertas_spi", card);
 	if (err) {
@@ -1148,8 +1156,6 @@ terminate_thread:
 	if_spi_terminate_spi_thread(card);
 remove_card:
 	lbs_remove_card(priv); /* will call free_netdev */
-free_gpio:
-	gpio_free(card->gpio_cs);
 free_card:
 	free_if_spi_card(card);
 out:
@@ -1170,7 +1176,6 @@ static int __devexit libertas_spi_remove(struct spi_device *spi)
 	free_irq(spi->irq, card);
 	if_spi_terminate_spi_thread(card);
 	lbs_remove_card(priv); /* will call free_netdev */
-	gpio_free(card->gpio_cs);
 	if (card->pdata->teardown)
 		card->pdata->teardown(spi);
 	free_if_spi_card(card);
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h
index 2103869cc5b..f87eec41084 100644
--- a/drivers/net/wireless/libertas/if_spi.h
+++ b/drivers/net/wireless/libertas/if_spi.h
@@ -22,6 +22,9 @@
 #define IF_SPI_CMD_BUF_SIZE 2400
 
 /***************** Firmware *****************/
+
+#define IF_SPI_FW_NAME_MAX 30
+
 struct chip_ident {
 	u16 chip_id;
 	u16 name;
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index ea3dc038be7..1844c5adf6e 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -61,11 +61,9 @@ static ssize_t if_usb_firmware_set(struct device *dev,
 {
 	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct if_usb_card *cardp = priv->card;
-	char fwname[FIRMWARE_NAME_MAX];
 	int ret;
 
-	sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */
-	ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_FW);
+	ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_FW);
 	if (ret == 0)
 		return count;
 
@@ -88,11 +86,9 @@ static ssize_t if_usb_boot2_set(struct device *dev,
 {
 	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct if_usb_card *cardp = priv->card;
-	char fwname[FIRMWARE_NAME_MAX];
 	int ret;
 
-	sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */
-	ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_BOOT2);
+	ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_BOOT2);
 	if (ret == 0)
 		return count;
 
@@ -686,8 +682,7 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
 		return;
 	}
 
-	if (!in_interrupt())
-		BUG();
+	BUG_ON(!in_interrupt());
 
 	spin_lock(&priv->driver_lock);
 
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 8ae935ac32f..89575e44801 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1307,8 +1307,10 @@ int lbs_start_card(struct lbs_private *priv)
 
 	lbs_update_channel(priv);
 
-	/* 5.0.16p0 is known to NOT support any mesh */
-	if (priv->fwrelease > 0x05001000) {
+	/* Check mesh FW version and appropriately send the mesh start
+	 * command
+	 */
+	if (priv->mesh_fw_ver == MESH_FW_OLD) {
 		/* Enable mesh, if supported, and work out which TLV it uses.
 		   0x100 + 291 is an unofficial value used in 5.110.20.pXX
 		   0x100 + 37 is the official value used in 5.110.21.pXX
@@ -1322,27 +1324,35 @@ int lbs_start_card(struct lbs_private *priv)
 		   It's just that 5.110.20.pXX will not have done anything
 		   useful */
 
-		priv->mesh_tlv = 0x100 + 291;
+		priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
 		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
 				    priv->curbssparams.channel)) {
-			priv->mesh_tlv = 0x100 + 37;
+			priv->mesh_tlv = TLV_TYPE_MESH_ID;
 			if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
 					    priv->curbssparams.channel))
 				priv->mesh_tlv = 0;
 		}
-		if (priv->mesh_tlv) {
-			lbs_add_mesh(priv);
-
-			if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
-				lbs_pr_err("cannot register lbs_mesh attribute\n");
-
-			/* While rtap isn't related to mesh, only mesh-enabled
-			 * firmware implements the rtap functionality via
-			 * CMD_802_11_MONITOR_MODE.
-			 */
-			if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
-				lbs_pr_err("cannot register lbs_rtap attribute\n");
-		}
+	} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+		/* 10.0.0.pXX new firmwares should succeed with TLV
+		 * 0x100+37; Do not invoke command with old TLV.
+		 */
+		priv->mesh_tlv = TLV_TYPE_MESH_ID;
+		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
+				    priv->curbssparams.channel))
+			priv->mesh_tlv = 0;
+	}
+	if (priv->mesh_tlv) {
+		lbs_add_mesh(priv);
+
+		if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
+			lbs_pr_err("cannot register lbs_mesh attribute\n");
+
+		/* While rtap isn't related to mesh, only mesh-enabled
+		 * firmware implements the rtap functionality via
+		 * CMD_802_11_MONITOR_MODE.
+		 */
+		if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
+			lbs_pr_err("cannot register lbs_rtap attribute\n");
 	}
 
 	lbs_debugfs_init_one(priv, dev);
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 8e669775cb5..65f02cc6752 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -25,7 +25,6 @@ struct rfc1042hdr {
 } __attribute__ ((packed));
 
 struct rxpackethdr {
-	struct rxpd rx_pd;
 	struct eth803hdr eth803_hdr;
 	struct rfc1042hdr rfc1042_hdr;
 } __attribute__ ((packed));
@@ -158,10 +157,18 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 	if (priv->monitormode)
 		return process_rxed_802_11_packet(priv, skb);
 
-	p_rx_pkt = (struct rxpackethdr *) skb->data;
-	p_rx_pd = &p_rx_pkt->rx_pd;
-	if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME))
-		dev = priv->mesh_dev;
+	p_rx_pd = (struct rxpd *) skb->data;
+	p_rx_pkt = (struct rxpackethdr *) ((u8 *)p_rx_pd +
+		le32_to_cpu(p_rx_pd->pkt_ptr));
+	if (priv->mesh_dev) {
+		if (priv->mesh_fw_ver == MESH_FW_OLD) {
+			if (p_rx_pd->rx_control & RxPD_MESH_FRAME)
+				dev = priv->mesh_dev;
+		} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+			if (p_rx_pd->u.bss.bss_num == MESH_IFACE_ID)
+				dev = priv->mesh_dev;
+		}
+	}
 
 	lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data,
 		 min_t(unsigned int, skb->len, 100));
@@ -174,20 +181,9 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 		goto done;
 	}
 
-	/*
-	 * Check rxpd status and update 802.3 stat,
-	 */
-	if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
-		lbs_deb_rx("rx err: frame received with bad status\n");
-		lbs_pr_alert("rxpd not ok\n");
-		dev->stats.rx_errors++;
-		ret = 0;
-		dev_kfree_skb(skb);
-		goto done;
-	}
-
-	lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
-	       skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
+	lbs_deb_rx("rx data: skb->len - pkt_ptr = %d-%zd = %zd\n",
+		skb->len, (size_t)le32_to_cpu(p_rx_pd->pkt_ptr),
+		skb->len - (size_t)le32_to_cpu(p_rx_pd->pkt_ptr));
 
 	lbs_deb_hex(LBS_DEB_RX, "RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr,
 		sizeof(p_rx_pkt->eth803_hdr.dest_addr));
@@ -221,14 +217,14 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 		/* Chop off the rxpd + the excess memory from the 802.2/llc/snap header
 		 *   that was removed
 		 */
-		hdrchop = (u8 *) p_ethhdr - (u8 *) p_rx_pkt;
+		hdrchop = (u8 *)p_ethhdr - (u8 *)p_rx_pd;
 	} else {
 		lbs_deb_hex(LBS_DEB_RX, "RX Data: LLC/SNAP",
 			(u8 *) & p_rx_pkt->rfc1042_hdr,
 			sizeof(p_rx_pkt->rfc1042_hdr));
 
 		/* Chop off the rxpd */
-		hdrchop = (u8 *) & p_rx_pkt->eth803_hdr - (u8 *) p_rx_pkt;
+		hdrchop = (u8 *)&p_rx_pkt->eth803_hdr - (u8 *)p_rx_pd;
 	}
 
 	/* Chop off the leading header bytes so the skb points to the start of
@@ -334,14 +330,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 		goto done;
 	}
 
-	/*
-	 * Check rxpd status and update 802.3 stat,
-	 */
-	if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
-		//lbs_deb_rx("rx err: frame received with bad status\n");
-		dev->stats.rx_errors++;
-	}
-
 	lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
 	       skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
 
@@ -353,8 +341,6 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
 	radiotap_hdr.hdr.it_pad = 0;
 	radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
 	radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
-	if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
-		radiotap_hdr.flags |= IEEE80211_RADIOTAP_F_BADFCS;
 	radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);
 	/* XXX must check no carryout */
 	radiotap_hdr.antsignal = prxpd->snr + prxpd->nf;
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 8124db36aaf..601b5424967 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -27,12 +27,12 @@
                              + 40)	/* 40 for WPAIE */
 
 //! Memory needed to store a max sized channel List TLV for a firmware scan
-#define CHAN_TLV_MAX_SIZE  (sizeof(struct mrvlietypesheader)    \
+#define CHAN_TLV_MAX_SIZE  (sizeof(struct mrvl_ie_header)    \
                             + (MRVDRV_MAX_CHANNELS_PER_SCAN     \
                                * sizeof(struct chanscanparamset)))
 
 //! Memory needed to store a max number/size SSID TLV for a firmware scan
-#define SSID_TLV_MAX_SIZE  (1 * sizeof(struct mrvlietypes_ssidparamset))
+#define SSID_TLV_MAX_SIZE  (1 * sizeof(struct mrvl_ie_ssid_param_set))
 
 //! Maximum memory needed for a cmd_ds_802_11_scan with all TLVs at max
 #define MAX_SCAN_CFG_ALLOC (sizeof(struct cmd_ds_802_11_scan)	\
@@ -211,7 +211,7 @@ static int lbs_scan_create_channel_list(struct lbs_private *priv,
  */
 static int lbs_scan_add_ssid_tlv(struct lbs_private *priv, u8 *tlv)
 {
-	struct mrvlietypes_ssidparamset *ssid_tlv = (void *)tlv;
+	struct mrvl_ie_ssid_param_set *ssid_tlv = (void *)tlv;
 
 	ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID);
 	ssid_tlv->header.len = cpu_to_le16(priv->scan_ssid_len);
@@ -249,7 +249,7 @@ static int lbs_scan_add_chanlist_tlv(uint8_t *tlv,
 				     int chan_count)
 {
 	size_t size = sizeof(struct chanscanparamset) *chan_count;
-	struct mrvlietypes_chanlistparamset *chan_tlv = (void *)tlv;
+	struct mrvl_ie_chanlist_param_set *chan_tlv = (void *)tlv;
 
 	chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
 	memcpy(chan_tlv->chanscanparam, chan_list, size);
@@ -270,7 +270,7 @@ static int lbs_scan_add_chanlist_tlv(uint8_t *tlv,
 static int lbs_scan_add_rates_tlv(uint8_t *tlv)
 {
 	int i;
-	struct mrvlietypes_ratesparamset *rate_tlv = (void *)tlv;
+	struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;
 
 	rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
 	tlv += sizeof(rate_tlv->header);
@@ -513,12 +513,12 @@ void lbs_scan_worker(struct work_struct *work)
 static int lbs_process_bss(struct bss_descriptor *bss,
 			   uint8_t **pbeaconinfo, int *bytesleft)
 {
-	struct ieeetypes_fhparamset *pFH;
-	struct ieeetypes_dsparamset *pDS;
-	struct ieeetypes_cfparamset *pCF;
-	struct ieeetypes_ibssparamset *pibss;
+	struct ieee_ie_fh_param_set *fh;
+	struct ieee_ie_ds_param_set *ds;
+	struct ieee_ie_cf_param_set *cf;
+	struct ieee_ie_ibss_param_set *ibss;
 	DECLARE_SSID_BUF(ssid);
-	struct ieeetypes_countryinfoset *pcountryinfo;
+	struct ieee_ie_country_info_set *pcountryinfo;
 	uint8_t *pos, *end, *p;
 	uint8_t n_ex_rates = 0, got_basic_rates = 0, n_basic_rates = 0;
 	uint16_t beaconsize = 0;
@@ -616,50 +616,49 @@ static int lbs_process_bss(struct bss_descriptor *bss,
 			break;
 
 		case WLAN_EID_FH_PARAMS:
-			pFH = (struct ieeetypes_fhparamset *) pos;
-			memmove(&bss->phyparamset.fhparamset, pFH,
-				sizeof(struct ieeetypes_fhparamset));
+			fh = (struct ieee_ie_fh_param_set *) pos;
+			memcpy(&bss->phy.fh, fh, sizeof(*fh));
 			lbs_deb_scan("got FH IE\n");
 			break;
 
 		case WLAN_EID_DS_PARAMS:
-			pDS = (struct ieeetypes_dsparamset *) pos;
-			bss->channel = pDS->currentchan;
-			memcpy(&bss->phyparamset.dsparamset, pDS,
-			       sizeof(struct ieeetypes_dsparamset));
+			ds = (struct ieee_ie_ds_param_set *) pos;
+			bss->channel = ds->channel;
+			memcpy(&bss->phy.ds, ds, sizeof(*ds));
 			lbs_deb_scan("got DS IE, channel %d\n", bss->channel);
 			break;
 
 		case WLAN_EID_CF_PARAMS:
-			pCF = (struct ieeetypes_cfparamset *) pos;
-			memcpy(&bss->ssparamset.cfparamset, pCF,
-			       sizeof(struct ieeetypes_cfparamset));
+			cf = (struct ieee_ie_cf_param_set *) pos;
+			memcpy(&bss->ss.cf, cf, sizeof(*cf));
 			lbs_deb_scan("got CF IE\n");
 			break;
 
 		case WLAN_EID_IBSS_PARAMS:
-			pibss = (struct ieeetypes_ibssparamset *) pos;
-			bss->atimwindow = le16_to_cpu(pibss->atimwindow);
-			memmove(&bss->ssparamset.ibssparamset, pibss,
-				sizeof(struct ieeetypes_ibssparamset));
+			ibss = (struct ieee_ie_ibss_param_set *) pos;
+			bss->atimwindow = ibss->atimwindow;
+			memcpy(&bss->ss.ibss, ibss, sizeof(*ibss));
 			lbs_deb_scan("got IBSS IE\n");
 			break;
 
 		case WLAN_EID_COUNTRY:
-			pcountryinfo = (struct ieeetypes_countryinfoset *) pos;
+			pcountryinfo = (struct ieee_ie_country_info_set *) pos;
 			lbs_deb_scan("got COUNTRY IE\n");
-			if (pcountryinfo->len < sizeof(pcountryinfo->countrycode)
-			    || pcountryinfo->len > 254) {
-				lbs_deb_scan("process_bss: 11D- Err CountryInfo len %d, min %zd, max 254\n",
-					     pcountryinfo->len, sizeof(pcountryinfo->countrycode));
+			if (pcountryinfo->header.len < sizeof(pcountryinfo->countrycode)
+			    || pcountryinfo->header.len > 254) {
+				lbs_deb_scan("%s: 11D- Err CountryInfo len %d, min %zd, max 254\n",
+					     __func__,
+					     pcountryinfo->header.len,
+					     sizeof(pcountryinfo->countrycode));
 				ret = -1;
 				goto done;
 			}
 
-			memcpy(&bss->countryinfo, pcountryinfo, pcountryinfo->len + 2);
+			memcpy(&bss->countryinfo, pcountryinfo,
+				pcountryinfo->header.len + 2);
 			lbs_deb_hex(LBS_DEB_SCAN, "process_bss: 11d countryinfo",
 				    (uint8_t *) pcountryinfo,
-				    (int) (pcountryinfo->len + 2));
+				    (int) (pcountryinfo->header.len + 2));
 			break;
 
 		case WLAN_EID_EXT_SUPP_RATES:
@@ -1130,7 +1129,7 @@ static int lbs_ret_80211_scan(struct lbs_private *priv, unsigned long dummy,
 		goto done;
 	}
 
-	bytesleft = le16_to_cpu(scanresp->bssdescriptsize);
+	bytesleft = get_unaligned_le16(&scanresp->bssdescriptsize);
 	lbs_deb_scan("SCAN_RESP: bssdescriptsize %d\n", bytesleft);
 
 	scanrespsize = le16_to_cpu(resp->size);
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index f10aa39a6b6..160cfd8311c 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -132,8 +132,12 @@ int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	txpd->tx_packet_length = cpu_to_le16(pkt_len);
 	txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));
 
-	if (dev == priv->mesh_dev)
-		txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
+	if (dev == priv->mesh_dev) {
+		if (priv->mesh_fw_ver == MESH_FW_OLD)
+			txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
+		else if (priv->mesh_fw_ver == MESH_FW_NEW)
+			txpd->u.bss.bss_num = MESH_IFACE_ID;
+	}
 
 	lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd));
 
diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h
index fb7a2d1a252..99905df65b2 100644
--- a/drivers/net/wireless/libertas/types.h
+++ b/drivers/net/wireless/libertas/types.h
@@ -8,9 +8,14 @@
 #include <asm/byteorder.h>
 #include <linux/wireless.h>
 
-struct ieeetypes_cfparamset {
-	u8 elementid;
+struct ieee_ie_header {
+	u8 id;
 	u8 len;
+} __attribute__ ((packed));
+
+struct ieee_ie_cf_param_set {
+	struct ieee_ie_header header;
+
 	u8 cfpcnt;
 	u8 cfpperiod;
 	__le16 cfpmaxduration;
@@ -18,42 +23,35 @@ struct ieeetypes_cfparamset {
 } __attribute__ ((packed));
 
 
-struct ieeetypes_ibssparamset {
-	u8 elementid;
-	u8 len;
+struct ieee_ie_ibss_param_set {
+	struct ieee_ie_header header;
+
 	__le16 atimwindow;
 } __attribute__ ((packed));
 
-union IEEEtypes_ssparamset {
-	struct ieeetypes_cfparamset cfparamset;
-	struct ieeetypes_ibssparamset ibssparamset;
+union ieee_ss_param_set {
+	struct ieee_ie_cf_param_set cf;
+	struct ieee_ie_ibss_param_set ibss;
 } __attribute__ ((packed));
 
-struct ieeetypes_fhparamset {
-	u8 elementid;
-	u8 len;
+struct ieee_ie_fh_param_set {
+	struct ieee_ie_header header;
+
 	__le16 dwelltime;
 	u8 hopset;
 	u8 hoppattern;
 	u8 hopindex;
 } __attribute__ ((packed));
 
-struct ieeetypes_dsparamset {
-	u8 elementid;
-	u8 len;
-	u8 currentchan;
-} __attribute__ ((packed));
+struct ieee_ie_ds_param_set {
+	struct ieee_ie_header header;
 
-union ieeetypes_phyparamset {
-	struct ieeetypes_fhparamset fhparamset;
-	struct ieeetypes_dsparamset dsparamset;
+	u8 channel;
 } __attribute__ ((packed));
 
-struct ieeetypes_assocrsp {
-	__le16 capability;
-	__le16 statuscode;
-	__le16 aid;
-	u8 iebuffer[1];
+union ieee_phy_param_set {
+	struct ieee_ie_fh_param_set fh;
+	struct ieee_ie_ds_param_set ds;
 } __attribute__ ((packed));
 
 /** TLV  type ID definition */
@@ -94,30 +92,33 @@ struct ieeetypes_assocrsp {
 #define TLV_TYPE_TSFTIMESTAMP	    (PROPRIETARY_TLV_BASE_ID + 19)
 #define TLV_TYPE_RSSI_HIGH          (PROPRIETARY_TLV_BASE_ID + 22)
 #define TLV_TYPE_SNR_HIGH           (PROPRIETARY_TLV_BASE_ID + 23)
+#define TLV_TYPE_AUTH_TYPE          (PROPRIETARY_TLV_BASE_ID + 31)
+#define TLV_TYPE_MESH_ID            (PROPRIETARY_TLV_BASE_ID + 37)
+#define TLV_TYPE_OLD_MESH_ID        (PROPRIETARY_TLV_BASE_ID + 291)
 
 /** TLV related data structures*/
-struct mrvlietypesheader {
+struct mrvl_ie_header {
 	__le16 type;
 	__le16 len;
 } __attribute__ ((packed));
 
-struct mrvlietypes_data {
-	struct mrvlietypesheader header;
+struct mrvl_ie_data {
+	struct mrvl_ie_header header;
 	u8 Data[1];
 } __attribute__ ((packed));
 
-struct mrvlietypes_ratesparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_rates_param_set {
+	struct mrvl_ie_header header;
 	u8 rates[1];
 } __attribute__ ((packed));
 
-struct mrvlietypes_ssidparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_ssid_param_set {
+	struct mrvl_ie_header header;
 	u8 ssid[1];
 } __attribute__ ((packed));
 
-struct mrvlietypes_wildcardssidparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_wildcard_ssid_param_set {
+	struct mrvl_ie_header header;
 	u8 MaxSsidlength;
 	u8 ssid[1];
 } __attribute__ ((packed));
@@ -142,91 +143,72 @@ struct chanscanparamset {
 	__le16 maxscantime;
 } __attribute__ ((packed));
 
-struct mrvlietypes_chanlistparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_chanlist_param_set {
+	struct mrvl_ie_header header;
 	struct chanscanparamset chanscanparam[1];
 } __attribute__ ((packed));
 
-struct cfparamset {
+struct mrvl_ie_cf_param_set {
+	struct mrvl_ie_header header;
 	u8 cfpcnt;
 	u8 cfpperiod;
 	__le16 cfpmaxduration;
 	__le16 cfpdurationremaining;
 } __attribute__ ((packed));
 
-struct ibssparamset {
-	__le16 atimwindow;
-} __attribute__ ((packed));
-
-struct mrvlietypes_ssparamset {
-	struct mrvlietypesheader header;
-	union {
-		struct cfparamset cfparamset[1];
-		struct ibssparamset ibssparamset[1];
-	} cf_ibss;
+struct mrvl_ie_ds_param_set {
+	struct mrvl_ie_header header;
+	u8 channel;
 } __attribute__ ((packed));
 
-struct fhparamset {
-	__le16 dwelltime;
-	u8 hopset;
-	u8 hoppattern;
-	u8 hopindex;
-} __attribute__ ((packed));
-
-struct dsparamset {
-	u8 currentchan;
-} __attribute__ ((packed));
-
-struct mrvlietypes_phyparamset {
-	struct mrvlietypesheader header;
-	union {
-		struct fhparamset fhparamset[1];
-		struct dsparamset dsparamset[1];
-	} fh_ds;
-} __attribute__ ((packed));
-
-struct mrvlietypes_rsnparamset {
-	struct mrvlietypesheader header;
+struct mrvl_ie_rsn_param_set {
+	struct mrvl_ie_header header;
 	u8 rsnie[1];
 } __attribute__ ((packed));
 
-struct mrvlietypes_tsftimestamp {
-	struct mrvlietypesheader header;
+struct mrvl_ie_tsf_timestamp {
+	struct mrvl_ie_header header;
 	__le64 tsftable[1];
 } __attribute__ ((packed));
 
+/* v9 and later firmware only */
+struct mrvl_ie_auth_type {
+	struct mrvl_ie_header header;
+	__le16 auth;
+} __attribute__ ((packed));
+
 /**  Local Power capability */
-struct mrvlietypes_powercapability {
-	struct mrvlietypesheader header;
+struct mrvl_ie_power_capability {
+	struct mrvl_ie_header header;
 	s8 minpower;
 	s8 maxpower;
 } __attribute__ ((packed));
 
 /* used in CMD_802_11_SUBSCRIBE_EVENT for SNR, RSSI and Failure */
-struct mrvlietypes_thresholds {
-	struct mrvlietypesheader header;
+struct mrvl_ie_thresholds {
+	struct mrvl_ie_header header;
 	u8 value;
 	u8 freq;
 } __attribute__ ((packed));
 
-struct mrvlietypes_beaconsmissed {
-	struct mrvlietypesheader header;
+struct mrvl_ie_beacons_missed {
+	struct mrvl_ie_header header;
 	u8 beaconmissed;
 	u8 reserved;
 } __attribute__ ((packed));
 
-struct mrvlietypes_numprobes {
-	struct mrvlietypesheader header;
+struct mrvl_ie_num_probes {
+	struct mrvl_ie_header header;
 	__le16 numprobes;
 } __attribute__ ((packed));
 
-struct mrvlietypes_bcastprobe {
-	struct mrvlietypesheader header;
+struct mrvl_ie_bcast_probe {
+	struct mrvl_ie_header header;
 	__le16 bcastprobe;
 } __attribute__ ((packed));
 
-struct mrvlietypes_numssidprobe {
-	struct mrvlietypesheader header;
+struct mrvl_ie_num_ssid_probe {
+	struct mrvl_ie_header header;
 	__le16 numssidprobe;
 } __attribute__ ((packed));
 
@@ -235,8 +217,8 @@ struct led_pin {
 	u8 pin;
 } __attribute__ ((packed));
 
-struct mrvlietypes_ledgpio {
-	struct mrvlietypesheader header;
+struct mrvl_ie_ledgpio {
+	struct mrvl_ie_header header;
 	struct led_pin ledpin[1];
 } __attribute__ ((packed));
 
@@ -248,8 +230,8 @@ struct led_bhv {
 } __attribute__ ((packed));
 
 
-struct mrvlietypes_ledbhv {
-	struct mrvlietypesheader header;
+struct mrvl_ie_ledbhv {
+	struct mrvl_ie_header header;
 	struct led_bhv ledbhv[1];
 } __attribute__ ((packed));
 
diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c
index 59634c33b1f..392337b37b1 100644
--- a/drivers/net/wireless/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/libertas_tf/if_usb.c
@@ -461,8 +461,7 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
 		return;
 	}
 
-	if (!in_interrupt())
-		BUG();
+	BUG_ON(!in_interrupt());
 
 	spin_lock(&priv->driver_lock);
 	memcpy(priv->cmd_resp_buff, recvbuff + MESSAGE_HEADER_LEN,
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index e7289e2e7f1..10a99e26d39 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -366,36 +366,6 @@ static int lbtf_op_config(struct ieee80211_hw *hw, u32 changed)
 	return 0;
 }
 
-static int lbtf_op_config_interface(struct ieee80211_hw *hw,
-			struct ieee80211_vif *vif,
-			struct ieee80211_if_conf *conf)
-{
-	struct lbtf_private *priv = hw->priv;
-	struct sk_buff *beacon;
-
-	switch (priv->vif->type) {
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_MESH_POINT:
-		beacon = ieee80211_beacon_get(hw, vif);
-		if (beacon) {
-			lbtf_beacon_set(priv, beacon);
-			kfree_skb(beacon);
-			lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int);
-		}
-		break;
-	default:
-		break;
-	}
-
-	if (conf->bssid) {
-		u8 null_bssid[ETH_ALEN] = {0};
-		bool activate = compare_ether_addr(conf->bssid, null_bssid);
-		lbtf_set_bssid(priv, activate, conf->bssid);
-	}
-
-	return 0;
-}
-
 #define SUPPORTED_FIF_FLAGS  (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)
 static void lbtf_op_configure_filter(struct ieee80211_hw *hw,
 			unsigned int changed_flags,
@@ -451,6 +421,29 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw,
 			u32 changes)
 {
 	struct lbtf_private *priv = hw->priv;
+	struct sk_buff *beacon;
+
+	if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_INT)) {
+		switch (priv->vif->type) {
+		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_MESH_POINT:
+			beacon = ieee80211_beacon_get(hw, vif);
+			if (beacon) {
+				lbtf_beacon_set(priv, beacon);
+				kfree_skb(beacon);
+				lbtf_beacon_ctrl(priv, 1,
+						 bss_conf->beacon_int);
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (changes & BSS_CHANGED_BSSID) {
+		bool activate = !is_zero_ether_addr(bss_conf->bssid);
+		lbtf_set_bssid(priv, activate, bss_conf->bssid);
+	}
 
 	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
 		if (bss_conf->use_short_preamble)
@@ -459,8 +452,6 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw,
 			priv->preamble = CMD_TYPE_LONG_PREAMBLE;
 		lbtf_set_radio_control(priv);
 	}
-
-	return;
 }
 
 static const struct ieee80211_ops lbtf_ops = {
@@ -470,7 +461,6 @@ static const struct ieee80211_ops lbtf_ops = {
 	.add_interface		= lbtf_op_add_interface,
 	.remove_interface	= lbtf_op_remove_interface,
 	.config			= lbtf_op_config,
-	.config_interface	= lbtf_op_config_interface,
 	.configure_filter	= lbtf_op_configure_filter,
 	.bss_info_changed	= lbtf_op_bss_info_changed,
 };
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index d4fdc8b7d7d..e789c6e9938 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -280,7 +280,6 @@ struct mac80211_hwsim_data {
 	struct ieee80211_rate rates[ARRAY_SIZE(hwsim_rates)];
 
 	struct ieee80211_channel *channel;
-	int radio_enabled;
 	unsigned long beacon_int; /* in jiffies unit */
 	unsigned int rx_filter;
 	int started;
@@ -291,6 +290,14 @@ struct mac80211_hwsim_data {
 	bool ps_poll_pending;
 	struct dentry *debugfs;
 	struct dentry *debugfs_ps;
+
+	/*
+	 * Only radios in the same group can communicate together (the
+	 * channel has to match too). Each bit represents a group. A
+	 * radio can be in more then one group.
+	 */
+	u64 group;
+	struct dentry *debugfs_group;
 };
 
 
@@ -410,9 +417,9 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 		if (data == data2)
 			continue;
 
-		if (!data2->started || !data2->radio_enabled ||
-		    !hwsim_ps_rx_ok(data2, skb) ||
-		    data->channel->center_freq != data2->channel->center_freq)
+		if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+		    data->channel->center_freq != data2->channel->center_freq ||
+		    !(data->group & data2->group))
 			continue;
 
 		nskb = skb_copy(skb, GFP_ATOMIC);
@@ -432,7 +439,6 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 
 static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
-	struct mac80211_hwsim_data *data = hw->priv;
 	bool ack;
 	struct ieee80211_tx_info *txi;
 
@@ -444,13 +450,6 @@ static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		return NETDEV_TX_OK;
 	}
 
-	if (!data->radio_enabled) {
-		printk(KERN_DEBUG "%s: dropped TX frame since radio "
-		       "disabled\n", wiphy_name(hw->wiphy));
-		dev_kfree_skb(skb);
-		return NETDEV_TX_OK;
-	}
-
 	ack = mac80211_hwsim_tx_frame(hw, skb);
 
 	txi = IEEE80211_SKB_CB(skb);
@@ -537,7 +536,7 @@ static void mac80211_hwsim_beacon(unsigned long arg)
 	struct ieee80211_hw *hw = (struct ieee80211_hw *) arg;
 	struct mac80211_hwsim_data *data = hw->priv;
 
-	if (!data->started || !data->radio_enabled)
+	if (!data->started)
 		return;
 
 	ieee80211_iterate_active_interfaces_atomic(
@@ -553,18 +552,14 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 	struct mac80211_hwsim_data *data = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
 
-	printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n",
+	printk(KERN_DEBUG "%s:%s (freq=%d idle=%d ps=%d)\n",
 	       wiphy_name(hw->wiphy), __func__,
-	       conf->channel->center_freq, conf->radio_enabled,
-	       conf->beacon_int);
+	       conf->channel->center_freq,
+	       !!(conf->flags & IEEE80211_CONF_IDLE),
+	       !!(conf->flags & IEEE80211_CONF_PS));
 
 	data->channel = conf->channel;
-	data->radio_enabled = conf->radio_enabled;
-	data->beacon_int = 1024 * conf->beacon_int / 1000 * HZ / 1000;
-	if (data->beacon_int < 1)
-		data->beacon_int = 1;
-
-	if (!data->started || !data->radio_enabled)
+	if (!data->started || !data->beacon_int)
 		del_timer(&data->beacon_timer);
 	else
 		mod_timer(&data->beacon_timer, jiffies + data->beacon_int);
@@ -592,35 +587,26 @@ static void mac80211_hwsim_configure_filter(struct ieee80211_hw *hw,
 	*total_flags = data->rx_filter;
 }
 
-static int mac80211_hwsim_config_interface(struct ieee80211_hw *hw,
-					   struct ieee80211_vif *vif,
-					   struct ieee80211_if_conf *conf)
-{
-	struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
-
-	hwsim_check_magic(vif);
-	if (conf->changed & IEEE80211_IFCC_BSSID) {
-		DECLARE_MAC_BUF(mac);
-		printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n",
-		       wiphy_name(hw->wiphy), __func__,
-		       conf->bssid);
-		memcpy(vp->bssid, conf->bssid, ETH_ALEN);
-	}
-	return 0;
-}
-
 static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 					    struct ieee80211_vif *vif,
 					    struct ieee80211_bss_conf *info,
 					    u32 changed)
 {
 	struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
+	struct mac80211_hwsim_data *data = hw->priv;
 
 	hwsim_check_magic(vif);
 
 	printk(KERN_DEBUG "%s:%s(changed=0x%x)\n",
 	       wiphy_name(hw->wiphy), __func__, changed);
 
+	if (changed & BSS_CHANGED_BSSID) {
+		printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n",
+		       wiphy_name(hw->wiphy), __func__,
+		       info->bssid);
+		memcpy(vp->bssid, info->bssid, ETH_ALEN);
+	}
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		printk(KERN_DEBUG "  %s: ASSOC: assoc=%d aid=%d\n",
 		       wiphy_name(hw->wiphy), info->assoc, info->aid);
@@ -628,6 +614,14 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 		vp->aid = info->aid;
 	}
 
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		printk(KERN_DEBUG "  %s: BCNINT: %d\n",
+		       wiphy_name(hw->wiphy), info->beacon_int);
+		data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000;
+		if (WARN_ON(!data->beacon_int))
+			data->beacon_int = 1;
+	}
+
 	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
 		printk(KERN_DEBUG "  %s: ERP_CTS_PROT: %d\n",
 		       wiphy_name(hw->wiphy), info->use_cts_prot);
@@ -646,7 +640,7 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_HT) {
 		printk(KERN_DEBUG "  %s: HT: op_mode=0x%x\n",
 		       wiphy_name(hw->wiphy),
-		       info->ht.operation_mode);
+		       info->ht_operation_mode);
 	}
 
 	if (changed & BSS_CHANGED_BASIC_RATES) {
@@ -704,7 +698,6 @@ static const struct ieee80211_ops mac80211_hwsim_ops =
 	.remove_interface = mac80211_hwsim_remove_interface,
 	.config = mac80211_hwsim_config,
 	.configure_filter = mac80211_hwsim_configure_filter,
-	.config_interface = mac80211_hwsim_config_interface,
 	.bss_info_changed = mac80211_hwsim_bss_info_changed,
 	.sta_notify = mac80211_hwsim_sta_notify,
 	.set_tim = mac80211_hwsim_set_tim,
@@ -725,6 +718,7 @@ static void mac80211_hwsim_free(void)
 	spin_unlock_bh(&hwsim_radio_lock);
 
 	list_for_each_entry(data, &tmplist, list) {
+		debugfs_remove(data->debugfs_group);
 		debugfs_remove(data->debugfs_ps);
 		debugfs_remove(data->debugfs);
 		ieee80211_unregister_hw(data->hw);
@@ -782,8 +776,7 @@ static void hwsim_send_ps_poll(void *dat, u8 *mac, struct ieee80211_vif *vif)
 	pspoll->aid = cpu_to_le16(0xc000 | vp->aid);
 	memcpy(pspoll->bssid, vp->bssid, ETH_ALEN);
 	memcpy(pspoll->ta, mac, ETH_ALEN);
-	if (data->radio_enabled &&
-	    !mac80211_hwsim_tx_frame(data->hw, skb))
+	if (!mac80211_hwsim_tx_frame(data->hw, skb))
 		printk(KERN_DEBUG "%s: PS-Poll frame not ack'ed\n", __func__);
 	dev_kfree_skb(skb);
 }
@@ -814,8 +807,7 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac,
 	memcpy(hdr->addr1, vp->bssid, ETH_ALEN);
 	memcpy(hdr->addr2, mac, ETH_ALEN);
 	memcpy(hdr->addr3, vp->bssid, ETH_ALEN);
-	if (data->radio_enabled &&
-	    !mac80211_hwsim_tx_frame(data->hw, skb))
+	if (!mac80211_hwsim_tx_frame(data->hw, skb))
 		printk(KERN_DEBUG "%s: nullfunc frame not ack'ed\n", __func__);
 	dev_kfree_skb(skb);
 }
@@ -877,6 +869,24 @@ DEFINE_SIMPLE_ATTRIBUTE(hwsim_fops_ps, hwsim_fops_ps_read, hwsim_fops_ps_write,
 			"%llu\n");
 
 
+static int hwsim_fops_group_read(void *dat, u64 *val)
+{
+	struct mac80211_hwsim_data *data = dat;
+	*val = data->group;
+	return 0;
+}
+
+static int hwsim_fops_group_write(void *dat, u64 val)
+{
+	struct mac80211_hwsim_data *data = dat;
+	data->group = val;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(hwsim_fops_group,
+			hwsim_fops_group_read, hwsim_fops_group_write,
+			"%llx\n");
+
 static int __init init_mac80211_hwsim(void)
 {
 	int i, err = 0;
@@ -981,6 +991,8 @@ static int __init init_mac80211_hwsim(void)
 
 			hw->wiphy->bands[band] = sband;
 		}
+		/* By default all radios are belonging to the first group */
+		data->group = 1;
 
 		/* Work to be done prior to ieee80211_register_hw() */
 		switch (regtest) {
@@ -1105,6 +1117,9 @@ static int __init init_mac80211_hwsim(void)
 		data->debugfs_ps = debugfs_create_file("ps", 0666,
 						       data->debugfs, data,
 						       &hwsim_fops_ps);
+		data->debugfs_group = debugfs_create_file("group", 0666,
+							data->debugfs, data,
+							&hwsim_fops_group);
 
 		setup_timer(&data->beacon_timer, mac80211_hwsim_beacon,
 			    (unsigned long) hw);
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index a9a970469c2..a263d5c84c0 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2369,7 +2369,7 @@ static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
 	if (info->use_cts_prot) {
 		prot_mode = MWL8K_FRAME_PROT_11G;
 	} else {
-		switch (info->ht.operation_mode &
+		switch (info->ht_operation_mode &
 			IEEE80211_HT_OP_MODE_PROTECTION) {
 		case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
 			prot_mode = MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY;
@@ -3089,19 +3089,6 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 	return rc ? -EINVAL : 0;
 }
 
-static int mwl8k_config_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif,
-				  struct ieee80211_if_conf *conf)
-{
-	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
-	u32 changed = conf->changed;
-
-	if (changed & IEEE80211_IFCC_BSSID)
-		memcpy(mv_vif->bssid, conf->bssid, IEEE80211_ADDR_LEN);
-
-	return 0;
-}
-
 struct mwl8k_bss_info_changed_worker {
 	struct mwl8k_work_struct header;
 	struct ieee80211_vif *vif;
@@ -3183,8 +3170,12 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct mwl8k_bss_info_changed_worker *worker;
 	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
 	int rc;
 
+	if (changed & BSS_CHANGED_BSSID)
+		memcpy(mv_vif->bssid, info->bssid, IEEE80211_ADDR_LEN);
+
 	if ((changed & BSS_CHANGED_ASSOC) == 0)
 		return;
 
@@ -3442,7 +3433,6 @@ static const struct ieee80211_ops mwl8k_ops = {
 	.add_interface		= mwl8k_add_interface,
 	.remove_interface	= mwl8k_remove_interface,
 	.config			= mwl8k_config,
-	.config_interface	= mwl8k_config_interface,
 	.bss_info_changed	= mwl8k_bss_info_changed,
 	.configure_filter	= mwl8k_configure_filter,
 	.set_rts_threshold	= mwl8k_set_rts_threshold,
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index ecf8b6ed5a4..db3df947d8e 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -125,6 +125,7 @@ struct p54_led_dev {
 	struct led_classdev led_dev;
 	char name[P54_LED_MAX_NAME_LEN + 1];
 
+	unsigned int toggled;
 	unsigned int index;
 	unsigned int registered;
 };
@@ -133,55 +134,74 @@ struct p54_led_dev {
 
 struct p54_common {
 	struct ieee80211_hw *hw;
-	u32 rx_start;
-	u32 rx_end;
-	struct sk_buff_head tx_queue;
+	struct ieee80211_vif *vif;
 	void (*tx)(struct ieee80211_hw *dev, struct sk_buff *skb);
 	int (*open)(struct ieee80211_hw *dev);
 	void (*stop)(struct ieee80211_hw *dev);
-	int mode;
+	struct sk_buff_head tx_queue;
+	struct mutex conf_mutex;
+
+	/* memory management (as seen by the firmware) */
+	u32 rx_start;
+	u32 rx_end;
 	u16 rx_mtu;
 	u8 headroom;
 	u8 tailroom;
-	struct mutex conf_mutex;
-	u8 mac_addr[ETH_ALEN];
-	u8 bssid[ETH_ALEN];
+
+	/* firmware/hardware info */
+	unsigned int tx_hdr_len;
+	unsigned int fw_var;
+	unsigned int fw_interface;
+	u8 version;
+
+	/* (e)DCF / QOS state */
+	bool use_short_slot;
+	struct ieee80211_tx_queue_stats tx_stats[8];
+	struct p54_edcf_queue_param qos_params[8];
+
+	/* Radio data */
+	u16 rxhw;
 	u8 rx_diversity_mask;
 	u8 tx_diversity_mask;
+	unsigned int output_power;
+	int noise;
+	/* calibration, output power limit and rssi<->dBm conversation data */
 	struct pda_iq_autocal_entry *iq_autocal;
 	unsigned int iq_autocal_len;
-	struct p54_cal_database *output_limit;
 	struct p54_cal_database *curve_data;
+	struct p54_cal_database *output_limit;
 	struct p54_rssi_linear_approximation rssical_db[IEEE80211_NUM_BANDS];
+
+	/* BBP/MAC state */
+	u8 mac_addr[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+	u16 wakeup_timer;
 	unsigned int filter_flags;
-	bool use_short_slot;
-	u16 rxhw;
-	u8 version;
-	unsigned int tx_hdr_len;
-	unsigned int fw_var;
-	unsigned int fw_interface;
-	unsigned int output_power;
-	u32 tsf_low32;
-	u32 tsf_high32;
+	int mode;
+	u32 tsf_low32, tsf_high32;
 	u32 basic_rate_mask;
-	u16 wakeup_timer;
 	u16 aid;
-	struct ieee80211_tx_queue_stats tx_stats[8];
-	struct p54_edcf_queue_param qos_params[8];
-	struct ieee80211_low_level_stats stats;
-	struct delayed_work work;
 	struct sk_buff *cached_beacon;
-	int noise;
-	void *eeprom;
-	struct completion eeprom_comp;
+
+	/* cryptographic engine information */
 	u8 privacy_caps;
 	u8 rx_keycache_size;
+	unsigned long *used_rxkeys;
+
 	/* LED management */
 #ifdef CONFIG_P54_LEDS
-	struct p54_led_dev assoc_led;
-	struct p54_led_dev tx_led;
+	struct p54_led_dev leds[4];
+	struct delayed_work led_work;
 #endif /* CONFIG_P54_LEDS */
 	u16 softled_state;		/* bit field of glowing LEDs */
+
+	/* statistics */
+	struct ieee80211_low_level_stats stats;
+	struct delayed_work work;
+
+	/* eeprom handling */
+	void *eeprom;
+	struct completion eeprom_comp;
 };
 
 int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb);
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index c8f0232ee5e..b618bd14583 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -249,7 +249,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 		dev->queues = P54_QUEUE_AC_NUM;
 	}
 
-	if (!modparam_nohwcrypt)
+	if (!modparam_nohwcrypt) {
 		printk(KERN_INFO "%s: cryptographic accelerator "
 				 "WEP:%s, TKIP:%s, CCMP:%s\n",
 			wiphy_name(dev->wiphy),
@@ -259,6 +259,26 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 			(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ?
 			"YES" : "no");
 
+		if (priv->rx_keycache_size) {
+			/*
+			 * NOTE:
+			 *
+			 * The firmware provides at most 255 (0 - 254) slots
+			 * for keys which are then used to offload decryption.
+			 * As a result the 255 entry (aka 0xff) can be used
+			 * safely by the driver to mark keys that didn't fit
+			 * into the full cache. This trick saves us from
+			 * keeping a extra list for uploaded keys.
+			 */
+
+			priv->used_rxkeys = kzalloc(BITS_TO_LONGS(
+				priv->rx_keycache_size), GFP_KERNEL);
+
+			if (!priv->used_rxkeys)
+				return -ENOMEM;
+		}
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(p54_parse_firmware);
@@ -749,8 +769,6 @@ static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 
 	rx_status.signal = p54_rssi_to_dbm(dev, hdr->rssi);
 	rx_status.noise = priv->noise;
-	/* XX correct? */
-	rx_status.qual = (100 * hdr->rssi) / 127;
 	if (hdr->rate & 0x10)
 		rx_status.flag |= RX_FLAG_SHORTPRE;
 	if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
@@ -804,44 +822,37 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct ieee80211_tx_info *info;
 	struct p54_tx_info *range;
 	unsigned long flags;
-	u32 freed = 0, last_addr = priv->rx_start;
 
-	if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
+	if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue)))
 		return;
 
-	/*
-	 * don't try to free an already unlinked skb
+	/* There used to be a check here to see if the SKB was on the
+	 * TX queue or not.  This can never happen because all SKBs we
+	 * see here successfully went through p54_assign_address()
+	 * which means the SKB is on the ->tx_queue.
 	 */
-	if (unlikely((!skb->next) || (!skb->prev)))
-		return;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
 	info = IEEE80211_SKB_CB(skb);
 	range = (void *)info->rate_driver_data;
-	if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
+	if (!skb_queue_is_first(&priv->tx_queue, skb)) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb->prev);
+		ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb));
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
-		last_addr = mr->end_addr;
 	}
-	if (skb->next != (struct sk_buff *)&priv->tx_queue) {
+	if (!skb_queue_is_last(&priv->tx_queue, skb)) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb->next);
+		ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb));
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
-		freed = mr->start_addr - last_addr;
-	} else
-		freed = priv->rx_end - last_addr;
+	}
 	__skb_unlink(skb, &priv->tx_queue);
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 	dev_kfree_skb_any(skb);
-
-	if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 +
-		     IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom)
-		p54_wake_free_queues(dev);
+	p54_wake_free_queues(dev);
 }
 EXPORT_SYMBOL_GPL(p54_free_skb);
 
@@ -853,15 +864,13 @@ static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev,
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	entry = priv->tx_queue.next;
-	while (entry != (struct sk_buff *)&priv->tx_queue) {
+	skb_queue_walk(&priv->tx_queue, entry) {
 		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
 
 		if (hdr->req_id == req_id) {
 			spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 			return entry;
 		}
-		entry = entry->next;
 	}
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 	return NULL;
@@ -875,37 +884,29 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct sk_buff *entry;
 	u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
 	struct p54_tx_info *range = NULL;
-	u32 freed = 0;
-	u32 last_addr = priv->rx_start;
 	unsigned long flags;
 	int count, idx;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	entry = (struct sk_buff *) priv->tx_queue.next;
-	while (entry != (struct sk_buff *)&priv->tx_queue) {
+	skb_queue_walk(&priv->tx_queue, entry) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
 		struct p54_tx_data *entry_data;
 		unsigned int pad = 0, frame_len;
 
 		range = (void *)info->rate_driver_data;
-		if (range->start_addr != addr) {
-			last_addr = range->end_addr;
-			entry = entry->next;
+		if (range->start_addr != addr)
 			continue;
-		}
 
-		if (entry->next != (struct sk_buff *)&priv->tx_queue) {
+		if (!skb_queue_is_last(&priv->tx_queue, entry)) {
 			struct ieee80211_tx_info *ni;
 			struct p54_tx_info *mr;
 
-			ni = IEEE80211_SKB_CB(entry->next);
+			ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue,
+							     entry));
 			mr = (struct p54_tx_info *)ni->rate_driver_data;
-			freed = mr->start_addr - last_addr;
-		} else
-			freed = priv->rx_end - last_addr;
+		}
 
-		last_addr = range->end_addr;
 		__skb_unlink(entry, &priv->tx_queue);
 		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
@@ -992,9 +993,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
 out:
-	if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 +
-		     IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom)
-		p54_wake_free_queues(dev);
+	p54_wake_free_queues(dev);
 }
 
 static void p54_rx_eeprom_readback(struct ieee80211_hw *dev,
@@ -1044,6 +1043,7 @@ static void p54_rx_stats(struct ieee80211_hw *dev, struct sk_buff *skb)
 
 static void p54_rx_trap(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
+	struct p54_common *priv = dev->priv;
 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 	struct p54_trap *trap = (struct p54_trap *) hdr->data;
 	u16 event = le16_to_cpu(trap->event);
@@ -1057,6 +1057,8 @@ static void p54_rx_trap(struct ieee80211_hw *dev, struct sk_buff *skb)
 			wiphy_name(dev->wiphy), freq);
 		break;
 	case P54_TRAP_NO_BEACON:
+		if (priv->vif)
+			ieee80211_beacon_loss(priv->vif);
 		break;
 	case P54_TRAP_SCAN:
 		break;
@@ -1162,23 +1164,21 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 		}
 	}
 
-	entry = priv->tx_queue.next;
-	while (left--) {
+	skb_queue_walk(&priv->tx_queue, entry) {
 		u32 hole_size;
 		info = IEEE80211_SKB_CB(entry);
 		range = (void *)info->rate_driver_data;
 		hole_size = range->start_addr - last_addr;
 		if (!target_skb && hole_size >= len) {
-			target_skb = entry->prev;
+			target_skb = skb_queue_prev(&priv->tx_queue, entry);
 			hole_size -= len;
 			target_addr = last_addr;
 		}
 		largest_hole = max(largest_hole, hole_size);
 		last_addr = range->end_addr;
-		entry = entry->next;
 	}
 	if (!target_skb && priv->rx_end - last_addr >= len) {
-		target_skb = priv->tx_queue.prev;
+		target_skb = skb_peek_tail(&priv->tx_queue);
 		largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
 		if (!skb_queue_empty(&priv->tx_queue)) {
 			info = IEEE80211_SKB_CB(target_skb);
@@ -1452,7 +1452,8 @@ static int p54_tx_fill(struct ieee80211_hw *dev, struct sk_buff *skb,
 
 		if (info->control.sta)
 			*aid = info->control.sta->aid;
-		else
+
+		if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
 			*flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
 		break;
 	}
@@ -1939,7 +1940,8 @@ static int p54_set_ps(struct ieee80211_hw *dev)
 	int i;
 
 	if (dev->conf.flags & IEEE80211_CONF_PS)
-		mode = P54_PSM | P54_PSM_DTIM | P54_PSM_MCBC;
+		mode = P54_PSM | P54_PSM_BEACON_TIMEOUT | P54_PSM_DTIM |
+		       P54_PSM_CHECKSUM | P54_PSM_MCBC;
 	else
 		mode = P54_PSM_CAM;
 
@@ -1957,9 +1959,10 @@ static int p54_set_ps(struct ieee80211_hw *dev)
 		psm->intervals[i].periods = cpu_to_le16(1);
 	}
 
-	psm->beacon_rssi_skip_max = 60;
+	psm->beacon_rssi_skip_max = 200;
 	psm->rssi_delta_threshold = 0;
-	psm->nr = 0;
+	psm->nr = 10;
+	psm->exclude[0] = 0;
 
 	priv->tx(dev, skb);
 
@@ -2081,20 +2084,21 @@ out:
 static void p54_stop(struct ieee80211_hw *dev)
 {
 	struct p54_common *priv = dev->priv;
-	struct sk_buff *skb;
 
 	mutex_lock(&priv->conf_mutex);
 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
 	priv->softled_state = 0;
 	p54_set_leds(dev);
 
+#ifdef CONFIG_P54_LEDS
+	cancel_delayed_work_sync(&priv->led_work);
+#endif /* CONFIG_P54_LEDS */
 	cancel_delayed_work_sync(&priv->work);
 	if (priv->cached_beacon)
 		p54_tx_cancel(dev, priv->cached_beacon);
 
 	priv->stop(dev);
-	while ((skb = skb_dequeue(&priv->tx_queue)))
-		kfree_skb(skb);
+	skb_queue_purge(&priv->tx_queue);
 	priv->cached_beacon = NULL;
 	priv->tsf_high32 = priv->tsf_low32 = 0;
 	mutex_unlock(&priv->conf_mutex);
@@ -2111,6 +2115,8 @@ static int p54_add_interface(struct ieee80211_hw *dev,
 		return -EOPNOTSUPP;
 	}
 
+	priv->vif = conf->vif;
+
 	switch (conf->type) {
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
@@ -2135,6 +2141,7 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
 	struct p54_common *priv = dev->priv;
 
 	mutex_lock(&priv->conf_mutex);
+	priv->vif = NULL;
 	if (priv->cached_beacon)
 		p54_tx_cancel(dev, priv->cached_beacon);
 	priv->mode = NL80211_IFTYPE_MONITOR;
@@ -2174,41 +2181,6 @@ out:
 	return ret;
 }
 
-static int p54_config_interface(struct ieee80211_hw *dev,
-				struct ieee80211_vif *vif,
-				struct ieee80211_if_conf *conf)
-{
-	struct p54_common *priv = dev->priv;
-	int ret = 0;
-
-	mutex_lock(&priv->conf_mutex);
-	if (conf->changed & IEEE80211_IFCC_BSSID) {
-		memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-		ret = p54_setup_mac(dev);
-		if (ret)
-			goto out;
-	}
-
-	if (conf->changed & IEEE80211_IFCC_BEACON) {
-		ret = p54_scan(dev, P54_SCAN_EXIT, 0);
-		if (ret)
-			goto out;
-		ret = p54_setup_mac(dev);
-		if (ret)
-			goto out;
-		ret = p54_beacon_update(dev, vif);
-		if (ret)
-			goto out;
-		ret = p54_set_edcf(dev);
-		if (ret)
-			goto out;
-	}
-
-out:
-	mutex_unlock(&priv->conf_mutex);
-	return ret;
-}
-
 static void p54_configure_filter(struct ieee80211_hw *dev,
 				 unsigned int changed_flags,
 				 unsigned int *total_flags,
@@ -2312,8 +2284,32 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
 				 u32 changed)
 {
 	struct p54_common *priv = dev->priv;
+	int ret;
+
+	mutex_lock(&priv->conf_mutex);
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(priv->bssid, info->bssid, ETH_ALEN);
+		ret = p54_setup_mac(dev);
+		if (ret)
+			goto out;
+	}
+
+	if (changed & BSS_CHANGED_BEACON) {
+		ret = p54_scan(dev, P54_SCAN_EXIT, 0);
+		if (ret)
+			goto out;
+		ret = p54_setup_mac(dev);
+		if (ret)
+			goto out;
+		ret = p54_beacon_update(dev, vif);
+		if (ret)
+			goto out;
+	}
+	/* XXX: this mimics having two callbacks... clean up */
+ out:
+	mutex_unlock(&priv->conf_mutex);
 
-	if (changed & BSS_CHANGED_ERP_SLOT) {
+	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) {
 		priv->use_short_slot = info->use_short_slot;
 		p54_set_edcf(dev);
 	}
@@ -2334,7 +2330,6 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
 			p54_setup_mac(dev);
 		}
 	}
-
 }
 
 static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
@@ -2344,61 +2339,84 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 	struct p54_common *priv = dev->priv;
 	struct sk_buff *skb;
 	struct p54_keycache *rxkey;
+	int slot, ret = 0;
 	u8 algo = 0;
 
 	if (modparam_nohwcrypt)
 		return -EOPNOTSUPP;
 
-	if (cmd == DISABLE_KEY)
-		algo = 0;
-	else {
+	mutex_lock(&priv->conf_mutex);
+	if (cmd == SET_KEY) {
 		switch (key->alg) {
 		case ALG_TKIP:
 			if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL |
-			      BR_DESC_PRIV_CAP_TKIP)))
-				return -EOPNOTSUPP;
+			      BR_DESC_PRIV_CAP_TKIP))) {
+				ret = -EOPNOTSUPP;
+				goto out_unlock;
+			}
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 			algo = P54_CRYPTO_TKIPMICHAEL;
 			break;
 		case ALG_WEP:
-			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP))
-				return -EOPNOTSUPP;
+			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) {
+				ret = -EOPNOTSUPP;
+				goto out_unlock;
+			}
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 			algo = P54_CRYPTO_WEP;
 			break;
 		case ALG_CCMP:
-			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP))
-				return -EOPNOTSUPP;
+			if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) {
+				ret = -EOPNOTSUPP;
+				goto out_unlock;
+			}
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 			algo = P54_CRYPTO_AESCCMP;
 			break;
 		default:
-			return -EOPNOTSUPP;
+			ret = -EOPNOTSUPP;
+			goto out_unlock;
 		}
-	}
+		slot = bitmap_find_free_region(priv->used_rxkeys,
+					       priv->rx_keycache_size, 0);
 
-	if (key->keyidx > priv->rx_keycache_size) {
-		/*
-		 * The device supports the choosen algorithm, but the firmware
-		 * does not provide enough key slots to store all of them.
-		 * So, incoming frames have to be decoded by the mac80211 stack,
-		 * but we can still offload encryption for outgoing frames.
-		 */
+		if (slot < 0) {
+			/*
+			 * The device supports the choosen algorithm, but the
+			 * firmware does not provide enough key slots to store
+			 * all of them.
+			 * But encryption offload for outgoing frames is always
+			 * possible, so we just pretend that the upload was
+			 * successful and do the decryption in software.
+			 */
 
-		return 0;
+			/* mark the key as invalid. */
+			key->hw_key_idx = 0xff;
+			goto out_unlock;
+		}
+	} else {
+		slot = key->hw_key_idx;
+
+		if (slot == 0xff) {
+			/* This key was not uploaded into the rx key cache. */
+
+			goto out_unlock;
+		}
+
+		bitmap_release_region(priv->used_rxkeys, slot, 0);
+		algo = 0;
 	}
 
-	mutex_lock(&priv->conf_mutex);
 	skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*rxkey),
-			    P54_CONTROL_TYPE_RX_KEYCACHE, GFP_ATOMIC);
+			    P54_CONTROL_TYPE_RX_KEYCACHE, GFP_KERNEL);
 	if (!skb) {
-		mutex_unlock(&priv->conf_mutex);
-		return -ENOMEM;
+		bitmap_release_region(priv->used_rxkeys, slot, 0);
+		ret = -ENOSPC;
+		goto out_unlock;
 	}
 
-	/* TODO: some devices have 4 more free slots for rx keys */
 	rxkey = (struct p54_keycache *)skb_put(skb, sizeof(*rxkey));
-	rxkey->entry = key->keyidx;
+	rxkey->entry = slot;
 	rxkey->key_id = key->keyidx;
 	rxkey->key_type = algo;
 	if (sta)
@@ -2416,11 +2434,51 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 	}
 
 	priv->tx(dev, skb);
+	key->hw_key_idx = slot;
+
+out_unlock:
 	mutex_unlock(&priv->conf_mutex);
-	return 0;
+	return ret;
 }
 
 #ifdef CONFIG_P54_LEDS
+static void p54_update_leds(struct work_struct *work)
+{
+	struct p54_common *priv = container_of(work, struct p54_common,
+					       led_work.work);
+	int err, i, tmp, blink_delay = 400;
+	bool rerun = false;
+
+	/* Don't toggle the LED, when the device is down. */
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	for (i = 0; i < ARRAY_SIZE(priv->leds); i++)
+		if (priv->leds[i].toggled) {
+			priv->softled_state |= BIT(i);
+
+			tmp = 70 + 200 / (priv->leds[i].toggled);
+			if (tmp < blink_delay)
+				blink_delay = tmp;
+
+			if (priv->leds[i].led_dev.brightness == LED_OFF)
+				rerun = true;
+
+			priv->leds[i].toggled =
+				!!priv->leds[i].led_dev.brightness;
+		} else
+			priv->softled_state &= ~BIT(i);
+
+	err = p54_set_leds(priv->hw);
+	if (err && net_ratelimit())
+		printk(KERN_ERR "%s: failed to update LEDs.\n",
+			wiphy_name(priv->hw->wiphy));
+
+	if (rerun)
+		queue_delayed_work(priv->hw->workqueue, &priv->led_work,
+			msecs_to_jiffies(blink_delay));
+}
+
 static void p54_led_brightness_set(struct led_classdev *led_dev,
 				   enum led_brightness brightness)
 {
@@ -2428,28 +2486,23 @@ static void p54_led_brightness_set(struct led_classdev *led_dev,
 					       led_dev);
 	struct ieee80211_hw *dev = led->hw_dev;
 	struct p54_common *priv = dev->priv;
-	int err;
 
-	/* Don't toggle the LED, when the device is down. */
 	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
 		return ;
 
-	if (brightness != LED_OFF)
-		priv->softled_state |= BIT(led->index);
-	else
-		priv->softled_state &= ~BIT(led->index);
-
-	err = p54_set_leds(dev);
-	if (err && net_ratelimit())
-		printk(KERN_ERR "%s: failed to update %s LED.\n",
-			wiphy_name(dev->wiphy), led_dev->name);
+	if (brightness) {
+		led->toggled++;
+		queue_delayed_work(priv->hw->workqueue, &priv->led_work,
+				   HZ/10);
+	}
 }
 
 static int p54_register_led(struct ieee80211_hw *dev,
-			    struct p54_led_dev *led,
 			    unsigned int led_index,
 			    char *name, char *trigger)
 {
+	struct p54_common *priv = dev->priv;
+	struct p54_led_dev *led = &priv->leds[led_index];
 	int err;
 
 	if (led->registered)
@@ -2482,19 +2535,30 @@ static int p54_init_leds(struct ieee80211_hw *dev)
 	 * TODO:
 	 * Figure out if the EEPROM contains some hints about the number
 	 * of available/programmable LEDs of the device.
-	 * But for now, we can assume that we have two programmable LEDs.
 	 */
 
-	err = p54_register_led(dev, &priv->assoc_led, 0, "assoc",
+	INIT_DELAYED_WORK(&priv->led_work, p54_update_leds);
+
+	err = p54_register_led(dev, 0, "assoc",
 			       ieee80211_get_assoc_led_name(dev));
 	if (err)
 		return err;
 
-	err = p54_register_led(dev, &priv->tx_led, 1, "tx",
+	err = p54_register_led(dev, 1, "tx",
 			       ieee80211_get_tx_led_name(dev));
 	if (err)
 		return err;
 
+	err = p54_register_led(dev, 2, "rx",
+			       ieee80211_get_rx_led_name(dev));
+	if (err)
+		return err;
+
+	err = p54_register_led(dev, 3, "radio",
+			       ieee80211_get_radio_led_name(dev));
+	if (err)
+		return err;
+
 	err = p54_set_leds(dev);
 	return err;
 }
@@ -2502,11 +2566,11 @@ static int p54_init_leds(struct ieee80211_hw *dev)
 static void p54_unregister_leds(struct ieee80211_hw *dev)
 {
 	struct p54_common *priv = dev->priv;
+	int i;
 
-	if (priv->tx_led.registered)
-		led_classdev_unregister(&priv->tx_led.led_dev);
-	if (priv->assoc_led.registered)
-		led_classdev_unregister(&priv->assoc_led.led_dev);
+	for (i = 0; i < ARRAY_SIZE(priv->leds); i++)
+		if (priv->leds[i].registered)
+			led_classdev_unregister(&priv->leds[i].led_dev);
 }
 #endif /* CONFIG_P54_LEDS */
 
@@ -2520,7 +2584,6 @@ static const struct ieee80211_ops p54_ops = {
 	.sta_notify		= p54_sta_notify,
 	.set_key		= p54_set_key,
 	.config			= p54_config,
-	.config_interface	= p54_config_interface,
 	.bss_info_changed	= p54_bss_info_changed,
 	.configure_filter	= p54_configure_filter,
 	.conf_tx		= p54_conf_tx,
@@ -2607,21 +2670,10 @@ void p54_free_common(struct ieee80211_hw *dev)
 	kfree(priv->iq_autocal);
 	kfree(priv->output_limit);
 	kfree(priv->curve_data);
+	kfree(priv->used_rxkeys);
 
 #ifdef CONFIG_P54_LEDS
 	p54_unregister_leds(dev);
 #endif /* CONFIG_P54_LEDS */
 }
 EXPORT_SYMBOL_GPL(p54_free_common);
-
-static int __init p54_init(void)
-{
-	return 0;
-}
-
-static void __exit p54_exit(void)
-{
-}
-
-module_init(p54_init);
-module_exit(p54_exit);
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index d1fe577de3d..83116baeb11 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -96,7 +96,7 @@ static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
 	spi_message_add_tail(&t[0], &m);
 
 	t[1].tx_buf = buf;
-	t[1].len = len;
+	t[1].len = len & ~1;
 	spi_message_add_tail(&t[1], &m);
 
 	if (len % 2) {
@@ -167,15 +167,31 @@ static const struct p54spi_spi_reg p54spi_registers_array[] =
 static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
 {
 	int i;
-	__le32 buffer;
 
 	for (i = 0; i < 2000; i++) {
-		p54spi_spi_read(priv, reg, &buffer, sizeof(buffer));
-		if (buffer == bits)
+		__le32 buffer = p54spi_read32(priv, reg);
+		if ((buffer & bits) == bits)
 			return 1;
+	}
+	return 0;
+}
 
-		msleep(1);
+static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
+				const void *buf, size_t len)
+{
+	if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
+			     cpu_to_le32(HOST_ALLOWED))) {
+		dev_err(&priv->spi->dev, "spi_write_dma not allowed "
+			"to DMA write.\n");
+		return -EAGAIN;
 	}
+
+	p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
+		       cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
+
+	p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
+	p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
+	p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
 	return 0;
 }
 
@@ -228,8 +244,15 @@ static int p54spi_request_eeprom(struct ieee80211_hw *dev)
 static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 {
 	struct p54s_priv *priv = dev->priv;
-	unsigned long fw_len, fw_addr;
-	long _fw_len;
+	unsigned long fw_len, _fw_len;
+	unsigned int offset = 0;
+	int err = 0;
+	u8 *fw;
+
+	fw_len = priv->firmware->size;
+	fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
 
 	/* stop the device */
 	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
@@ -244,36 +267,17 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 
 	msleep(TARGET_BOOT_SLEEP);
 
-	fw_addr = ISL38XX_DEV_FIRMWARE_ADDR;
-	fw_len = priv->firmware->size;
-
 	while (fw_len > 0) {
 		_fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
 
-		p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
-			       cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
-
-		if (p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
-				    cpu_to_le32(HOST_ALLOWED)) == 0) {
-			dev_err(&priv->spi->dev, "fw_upload not allowed "
-				"to DMA write.");
-			return -EAGAIN;
-		}
-
-		p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN,
-			       cpu_to_le16(_fw_len));
-		p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE,
-			       cpu_to_le32(fw_addr));
-
-		p54spi_spi_write(priv, SPI_ADRS_DMA_DATA,
-				 &priv->firmware->data, _fw_len);
+		err = p54spi_spi_write_dma(priv, cpu_to_le32(
+					   ISL38XX_DEV_FIRMWARE_ADDR + offset),
+					   (fw + offset), _fw_len);
+		if (err < 0)
+			goto out;
 
 		fw_len -= _fw_len;
-		fw_addr += _fw_len;
-
-		/* FIXME: I think this doesn't work if firmware is large,
-		 * this loop goes to second round. fw->data is not
-		 * increased at all! */
+		offset += _fw_len;
 	}
 
 	BUG_ON(fw_len != 0);
@@ -292,7 +296,10 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
 		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
 	msleep(TARGET_BOOT_SLEEP);
-	return 0;
+
+out:
+	kfree(fw);
+	return err;
 }
 
 static void p54spi_power_off(struct p54s_priv *priv)
@@ -318,29 +325,21 @@ static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
 	p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
 }
 
-static void p54spi_wakeup(struct p54s_priv *priv)
+static int p54spi_wakeup(struct p54s_priv *priv)
 {
-	unsigned long timeout;
-	u32 ints;
-
 	/* wake the chip */
 	p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
 		       cpu_to_le32(SPI_TARGET_INT_WAKEUP));
 
 	/* And wait for the READY interrupt */
-	timeout = jiffies + HZ;
-
-	ints =  p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
-	while (!(ints & SPI_HOST_INT_READY)) {
-		if (time_after(jiffies, timeout))
-				goto out;
-		ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
+			     cpu_to_le32(SPI_HOST_INT_READY))) {
+		dev_err(&priv->spi->dev, "INT_READY timeout\n");
+		return -EBUSY;
 	}
 
 	p54spi_int_ack(priv, SPI_HOST_INT_READY);
-
-out:
-	return;
+	return 0;
 }
 
 static inline void p54spi_sleep(struct p54s_priv *priv)
@@ -372,27 +371,48 @@ static int p54spi_rx(struct p54s_priv *priv)
 {
 	struct sk_buff *skb;
 	u16 len;
+	u16 rx_head[2];
+#define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16))
 
-	p54spi_wakeup(priv);
-
-	/* dummy read to flush SPI DMA controller bug */
-	p54spi_read16(priv, SPI_ADRS_GEN_PURP_1);
+	if (p54spi_wakeup(priv) < 0)
+		return -EBUSY;
 
-	len = p54spi_read16(priv, SPI_ADRS_DMA_DATA);
+	/* Read data size and first data word in one SPI transaction
+	 * This is workaround for firmware/DMA bug,
+	 * when first data word gets lost under high load.
+	 */
+	p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head));
+	len = rx_head[0];
 
 	if (len == 0) {
-		dev_err(&priv->spi->dev, "rx request of zero bytes");
+		p54spi_sleep(priv);
+		dev_err(&priv->spi->dev, "rx request of zero bytes\n");
 		return 0;
 	}
 
-	skb = dev_alloc_skb(len);
+	/* Firmware may insert up to 4 padding bytes after the lmac header,
+	 * but it does not amend the size of SPI data transfer.
+	 * Such packets has correct data size in header, thus referencing
+	 * past the end of allocated skb. Reserve extra 4 bytes for this case */
+	skb = dev_alloc_skb(len + 4);
 	if (!skb) {
+		p54spi_sleep(priv);
 		dev_err(&priv->spi->dev, "could not alloc skb");
-		return 0;
+		return -ENOMEM;
 	}
 
-	p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, skb_put(skb, len), len);
+	if (len <= READAHEAD_SZ) {
+		memcpy(skb_put(skb, len), rx_head + 1, len);
+	} else {
+		memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ);
+		p54spi_spi_read(priv, SPI_ADRS_DMA_DATA,
+				skb_put(skb, len - READAHEAD_SZ),
+				len - READAHEAD_SZ);
+	}
 	p54spi_sleep(priv);
+	/* Put additional bytes to compensate for the possible
+	 * alignment-caused truncation */
+	skb_put(skb, 4);
 
 	if (p54_rx(priv->hw, skb) == 0)
 		dev_kfree_skb(skb);
@@ -414,39 +434,28 @@ static irqreturn_t p54spi_interrupt(int irq, void *config)
 static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
 {
 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
-	struct p54s_dma_regs dma_regs;
-	unsigned long timeout;
 	int ret = 0;
-	u32 ints;
-
-	p54spi_wakeup(priv);
 
-	dma_regs.cmd = cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE);
-	dma_regs.len = cpu_to_le16(skb->len);
-	dma_regs.addr = hdr->req_id;
+	if (p54spi_wakeup(priv) < 0)
+		return -EBUSY;
 
-	p54spi_spi_write(priv, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs,
-			   sizeof(dma_regs));
-
-	p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, skb->data, skb->len);
+	ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
+	if (ret < 0)
+		goto out;
 
-	timeout = jiffies + 2 * HZ;
-	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
-	while (!(ints & SPI_HOST_INT_WR_READY)) {
-		if (time_after(jiffies, timeout)) {
-			dev_err(&priv->spi->dev, "WR_READY timeout");
-			ret = -1;
-			goto out;
-		}
-		ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
+	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
+			     cpu_to_le32(SPI_HOST_INT_WR_READY))) {
+		dev_err(&priv->spi->dev, "WR_READY timeout\n");
+		ret = -EAGAIN;
+		goto out;
 	}
 
 	p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
-	p54spi_sleep(priv);
 
-out:
 	if (FREE_AFTER_TX(skb))
 		p54_free_skb(priv->hw, skb);
+out:
+	p54spi_sleep(priv);
 	return ret;
 }
 
@@ -516,8 +525,7 @@ static void p54spi_work(struct work_struct *work)
 
 	mutex_lock(&priv->mutex);
 
-	if (priv->fw_state == FW_STATE_OFF &&
-	    priv->fw_state == FW_STATE_RESET)
+	if (priv->fw_state == FW_STATE_OFF)
 		goto out;
 
 	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
@@ -544,11 +552,6 @@ static void p54spi_work(struct work_struct *work)
 	}
 
 	ret = p54spi_wq_tx(priv);
-	if (ret < 0)
-		goto out;
-
-	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
-
 out:
 	mutex_unlock(&priv->mutex);
 }
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 6cc6cbc9234..0e877a104a8 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -81,6 +81,29 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 
 MODULE_DEVICE_TABLE(usb, p54u_table);
 
+static const struct {
+	u32 intf;
+	enum p54u_hw_type type;
+	const char *fw;
+	const char *fw_legacy;
+	char hw[20];
+} p54u_fwlist[__NUM_P54U_HWTYPES] = {
+	{
+		.type = P54U_NET2280,
+		.intf = FW_LM86,
+		.fw = "isl3886usb",
+		.fw_legacy = "isl3890usb",
+		.hw = "ISL3886 + net2280",
+	},
+	{
+		.type = P54U_3887,
+		.intf = FW_LM87,
+		.fw = "isl3887usb",
+		.fw_legacy = "isl3887usb_bare",
+		.hw = "ISL3887",
+	},
+};
+
 static void p54u_rx_cb(struct urb *urb)
 {
 	struct sk_buff *skb = (struct sk_buff *) urb->context;
@@ -125,11 +148,7 @@ static void p54u_rx_cb(struct urb *urb)
 		}
 		skb_reset_tail_pointer(skb);
 		skb_trim(skb, 0);
-		if (urb->transfer_buffer != skb_tail_pointer(skb)) {
-			/* this should not happen */
-			WARN_ON(1);
-			urb->transfer_buffer = skb_tail_pointer(skb);
-		}
+		urb->transfer_buffer = skb_tail_pointer(skb);
 	}
 	skb_queue_tail(&priv->rx_queue, skb);
 	usb_anchor_urb(urb, &priv->submitted);
@@ -206,53 +225,6 @@ static int p54u_init_urbs(struct ieee80211_hw *dev)
 	return ret;
 }
 
-static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
-	struct p54u_priv *priv = dev->priv;
-	struct urb *addr_urb, *data_urb;
-	int err = 0;
-
-	addr_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!addr_urb)
-		return;
-
-	data_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!data_urb) {
-		usb_free_urb(addr_urb);
-		return;
-	}
-
-	usb_fill_bulk_urb(addr_urb, priv->udev,
-			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  &((struct p54_hdr *)skb->data)->req_id, 4,
-			  p54u_tx_dummy_cb, dev);
-	usb_fill_bulk_urb(data_urb, priv->udev,
-			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, FREE_AFTER_TX(skb) ?
-			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
-	addr_urb->transfer_flags |= URB_ZERO_PACKET;
-	data_urb->transfer_flags |= URB_ZERO_PACKET;
-
-	usb_anchor_urb(addr_urb, &priv->submitted);
-	err = usb_submit_urb(addr_urb, GFP_ATOMIC);
-	if (err) {
-		usb_unanchor_urb(addr_urb);
-		goto out;
-	}
-
-	usb_anchor_urb(data_urb, &priv->submitted);
-	err = usb_submit_urb(data_urb, GFP_ATOMIC);
-	if (err)
-		usb_unanchor_urb(data_urb);
-
- out:
-	usb_free_urb(addr_urb);
-	usb_free_urb(data_urb);
-
-	if (err)
-		p54_free_skb(dev, skb);
-}
-
 static __le32 p54u_lm87_chksum(const __le32 *data, size_t length)
 {
 	u32 chk = 0;
@@ -425,20 +397,16 @@ static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep,
 			    data, len, &alen, 2000);
 }
 
-static const char p54u_romboot_3887[] = "~~~~";
-static const char p54u_firmware_upload_3887[] = "<\r";
-
-static int p54u_device_reset_3887(struct ieee80211_hw *dev)
+static int p54u_device_reset(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
 	int ret, lock = (priv->intf->condition != USB_INTERFACE_BINDING);
-	u8 buf[4];
 
 	if (lock) {
 		ret = usb_lock_device_for_reset(priv->udev, priv->intf);
 		if (ret < 0) {
 			dev_err(&priv->udev->dev, "(p54usb) unable to lock "
-				" device for reset: %d\n", ret);
+				"device for reset (%d)!\n", ret);
 			return ret;
 		}
 	}
@@ -447,26 +415,34 @@ static int p54u_device_reset_3887(struct ieee80211_hw *dev)
 	if (lock)
 		usb_unlock_device(priv->udev);
 
-	if (ret) {
+	if (ret)
 		dev_err(&priv->udev->dev, "(p54usb) unable to reset "
-			"device: %d\n", ret);
-		return ret;
-	}
+			"device (%d)!\n", ret);
+
+	return ret;
+}
+
+static const char p54u_romboot_3887[] = "~~~~";
+static int p54u_firmware_reset_3887(struct ieee80211_hw *dev)
+{
+	struct p54u_priv *priv = dev->priv;
+	u8 buf[4];
+	int ret;
 
 	memcpy(&buf, p54u_romboot_3887, sizeof(buf));
 	ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
 			    buf, sizeof(buf));
 	if (ret)
 		dev_err(&priv->udev->dev, "(p54usb) unable to jump to "
-			"boot ROM: %d\n", ret);
+			"boot ROM (%d)!\n", ret);
 
 	return ret;
 }
 
+static const char p54u_firmware_upload_3887[] = "<\r";
 static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
-	const struct firmware *fw_entry = NULL;
 	int err, alen;
 	u8 carry = 0;
 	u8 *buf, *tmp;
@@ -475,51 +451,29 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 	struct x2_header *hdr;
 	unsigned long timeout;
 
+	err = p54u_firmware_reset_3887(dev);
+	if (err)
+		return err;
+
 	tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL);
 	if (!buf) {
 		dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware"
 					  "upload buffer!\n");
-		err = -ENOMEM;
-		goto err_bufalloc;
-	}
-
-	err = p54u_device_reset_3887(dev);
-	if (err)
-		goto err_reset;
-
-	err = request_firmware(&fw_entry, "isl3887usb", &priv->udev->dev);
-	if (err) {
-		dev_err(&priv->udev->dev, "p54usb: cannot find firmware "
-					  "(isl3887usb)\n");
-		err = request_firmware(&fw_entry, "isl3887usb_bare",
-			&priv->udev->dev);
-		if (err)
-			goto err_req_fw_failed;
-	}
-
-	err = p54_parse_firmware(dev, fw_entry);
-	if (err)
-		goto err_upload_failed;
-
-	if (priv->common.fw_interface != FW_LM87) {
-		dev_err(&priv->udev->dev, "wrong firmware, "
-			"please get a LM87 firmware and try again.\n");
-		err = -EINVAL;
-		goto err_upload_failed;
+		return -ENOMEM;
 	}
 
-	left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size);
+	left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size);
 	strcpy(buf, p54u_firmware_upload_3887);
 	left -= strlen(p54u_firmware_upload_3887);
 	tmp += strlen(p54u_firmware_upload_3887);
 
-	data = fw_entry->data;
-	remains = fw_entry->size;
+	data = priv->fw->data;
+	remains = priv->fw->size;
 
 	hdr = (struct x2_header *)(buf + strlen(p54u_firmware_upload_3887));
 	memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE);
 	hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR);
-	hdr->fw_length = cpu_to_le32(fw_entry->size);
+	hdr->fw_length = cpu_to_le32(priv->fw->size);
 	hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr,
 					 sizeof(u32)*2));
 	left -= sizeof(*hdr);
@@ -561,7 +515,8 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 		left = block_size = min((unsigned int)P54U_FW_BLOCK, remains);
 	}
 
-	*((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size));
+	*((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, priv->fw->data,
+						 priv->fw->size));
 	err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
 	if (err) {
 		dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n");
@@ -612,19 +567,14 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 	if (err)
 		goto err_upload_failed;
 
-  err_upload_failed:
-	release_firmware(fw_entry);
-  err_req_fw_failed:
-  err_reset:
+err_upload_failed:
 	kfree(buf);
-  err_bufalloc:
 	return err;
 }
 
 static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
-	const struct firmware *fw_entry = NULL;
 	const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE;
 	int err, alen;
 	void *buf;
@@ -639,33 +589,6 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 		return -ENOMEM;
 	}
 
-	err = request_firmware(&fw_entry, "isl3886usb", &priv->udev->dev);
-	if (err) {
-		dev_err(&priv->udev->dev, "(p54usb) cannot find firmware "
-					  "(isl3886usb)\n");
-		err = request_firmware(&fw_entry, "isl3890usb",
-			&priv->udev->dev);
-		if (err) {
-			kfree(buf);
-			return err;
-			}
-	}
-
-	err = p54_parse_firmware(dev, fw_entry);
-	if (err) {
-		kfree(buf);
-		release_firmware(fw_entry);
-		return err;
-	}
-
-	if (priv->common.fw_interface != FW_LM86) {
-		dev_err(&priv->udev->dev, "wrong firmware, "
-			"please get a LM86(USB) firmware and try again.\n");
-		kfree(buf);
-		release_firmware(fw_entry);
-		return -EINVAL;
-	}
-
 #define P54U_WRITE(type, addr, data) \
 	do {\
 		err = p54u_write(priv, buf, type,\
@@ -765,8 +688,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 	P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg);
 
 	/* finally, we can upload firmware now! */
-	remains = fw_entry->size;
-	data = fw_entry->data;
+	remains = priv->fw->size;
+	data = priv->fw->data;
 	offset = ISL38XX_DEV_FIRMWARE_ADDR;
 
 	while (remains) {
@@ -875,12 +798,54 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 #undef P54U_WRITE
 #undef P54U_READ
 
- fail:
-	release_firmware(fw_entry);
+fail:
 	kfree(buf);
 	return err;
 }
 
+static int p54u_load_firmware(struct ieee80211_hw *dev)
+{
+	struct p54u_priv *priv = dev->priv;
+	int err, i;
+
+	BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+
+	for (i = 0; i < __NUM_P54U_HWTYPES; i++)
+		if (p54u_fwlist[i].type == priv->hw_type)
+			break;
+
+	if (i == __NUM_P54U_HWTYPES)
+		return -EOPNOTSUPP;
+
+	err = request_firmware(&priv->fw, p54u_fwlist[i].fw, &priv->udev->dev);
+	if (err) {
+		dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
+					  "(%d)!\n", p54u_fwlist[i].fw, err);
+
+		err = request_firmware(&priv->fw, p54u_fwlist[i].fw_legacy,
+				       &priv->udev->dev);
+		if (err)
+			return err;
+	}
+
+	err = p54_parse_firmware(dev, priv->fw);
+	if (err)
+		goto out;
+
+	if (priv->common.fw_interface != p54u_fwlist[i].intf) {
+		dev_err(&priv->udev->dev, "wrong firmware, please get "
+			"a firmware for \"%s\" and try again.\n",
+			p54u_fwlist[i].hw);
+		err = -EINVAL;
+	}
+
+out:
+	if (err)
+		release_firmware(priv->fw);
+
+	return err;
+}
+
 static int p54u_open(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
@@ -922,6 +887,7 @@ static int __devinit p54u_probe(struct usb_interface *intf,
 	}
 
 	priv = dev->priv;
+	priv->hw_type = P54U_INVALID_HW;
 
 	SET_IEEE80211_DEV(dev, &intf->dev);
 	usb_set_intfdata(intf, dev);
@@ -953,37 +919,48 @@ static int __devinit p54u_probe(struct usb_interface *intf,
 	priv->common.open = p54u_open;
 	priv->common.stop = p54u_stop;
 	if (recognized_pipes < P54U_PIPE_NUMBER) {
+#ifdef CONFIG_PM
+		/* ISL3887 needs a full reset on resume */
+		udev->reset_resume = 1;
+		err = p54u_device_reset(dev);
+#endif
+
 		priv->hw_type = P54U_3887;
-		err = p54u_upload_firmware_3887(dev);
-		if (priv->common.fw_interface == FW_LM87) {
-			dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
-			priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr);
-			priv->common.tx = p54u_tx_lm87;
-		} else
-			priv->common.tx = p54u_tx_3887;
+		dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
+		priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr);
+		priv->common.tx = p54u_tx_lm87;
+		priv->upload_fw = p54u_upload_firmware_3887;
 	} else {
 		priv->hw_type = P54U_NET2280;
 		dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr);
 		priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr);
 		priv->common.tx = p54u_tx_net2280;
-		err = p54u_upload_firmware_net2280(dev);
+		priv->upload_fw = p54u_upload_firmware_net2280;
 	}
+	err = p54u_load_firmware(dev);
 	if (err)
 		goto err_free_dev;
 
+	err = priv->upload_fw(dev);
+	if (err)
+		goto err_free_fw;
+
 	p54u_open(dev);
 	err = p54_read_eeprom(dev);
 	p54u_stop(dev);
 	if (err)
-		goto err_free_dev;
+		goto err_free_fw;
 
 	err = p54_register_common(dev, &udev->dev);
 	if (err)
-		goto err_free_dev;
+		goto err_free_fw;
 
 	return 0;
 
- err_free_dev:
+err_free_fw:
+	release_firmware(priv->fw);
+
+err_free_dev:
 	ieee80211_free_hw(dev);
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(udev);
@@ -1002,20 +979,64 @@ static void __devexit p54u_disconnect(struct usb_interface *intf)
 
 	priv = dev->priv;
 	usb_put_dev(interface_to_usbdev(intf));
+	release_firmware(priv->fw);
 	p54_free_common(dev);
 	ieee80211_free_hw(dev);
 }
 
 static int p54u_pre_reset(struct usb_interface *intf)
 {
+	struct ieee80211_hw *dev = usb_get_intfdata(intf);
+
+	if (!dev)
+		return -ENODEV;
+
+	p54u_stop(dev);
 	return 0;
 }
 
+static int p54u_resume(struct usb_interface *intf)
+{
+	struct ieee80211_hw *dev = usb_get_intfdata(intf);
+	struct p54u_priv *priv;
+
+	if (!dev)
+		return -ENODEV;
+
+	priv = dev->priv;
+	if (unlikely(!(priv->upload_fw && priv->fw)))
+		return 0;
+
+	return priv->upload_fw(dev);
+}
+
 static int p54u_post_reset(struct usb_interface *intf)
 {
+	struct ieee80211_hw *dev = usb_get_intfdata(intf);
+	struct p54u_priv *priv;
+	int err;
+
+	err = p54u_resume(intf);
+	if (err)
+		return err;
+
+	/* reinitialize old device state */
+	priv = dev->priv;
+	if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED)
+		ieee80211_restart_hw(dev);
+
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
+static int p54u_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	return p54u_pre_reset(intf);
+}
+
+#endif /* CONFIG_PM */
+
 static struct usb_driver p54u_driver = {
 	.name	= "p54usb",
 	.id_table = p54u_table,
@@ -1023,6 +1044,11 @@ static struct usb_driver p54u_driver = {
 	.disconnect = p54u_disconnect,
 	.pre_reset = p54u_pre_reset,
 	.post_reset = p54u_post_reset,
+#ifdef CONFIG_PM
+	.suspend = p54u_suspend,
+	.resume = p54u_resume,
+	.reset_resume = p54u_resume,
+#endif /* CONFIG_PM */
 	.soft_unbind = 1,
 };
 
diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h
index 8bc58982d8d..e935b79f7f7 100644
--- a/drivers/net/wireless/p54/p54usb.h
+++ b/drivers/net/wireless/p54/p54usb.h
@@ -123,18 +123,26 @@ struct p54u_rx_info {
 	struct ieee80211_hw *dev;
 };
 
+enum p54u_hw_type {
+	P54U_INVALID_HW,
+	P54U_NET2280,
+	P54U_3887,
+
+	/* keep last */
+	__NUM_P54U_HWTYPES,
+};
+
 struct p54u_priv {
 	struct p54_common common;
 	struct usb_device *udev;
 	struct usb_interface *intf;
-	enum {
-		P54U_NET2280 = 0,
-		P54U_3887
-	} hw_type;
+	int (*upload_fw)(struct ieee80211_hw *dev);
 
+	enum p54u_hw_type hw_type;
 	spinlock_t lock;
 	struct sk_buff_head rx_queue;
 	struct usb_anchor submitted;
+	const struct firmware *fw;
 };
 
 #endif /* P54USB_H */
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index ef3ef4551b3..8f621099344 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -87,7 +87,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	unsigned long flags;
 	unsigned char wds_mac[6];
 	u32 curr_frag;
-	int err = 0;
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
 	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
@@ -107,8 +106,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 		isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
 				  ISL38XX_DEV_INT_REG);
 		udelay(ISL38XX_WRITEIO_DELAY);
-
-		err = -EBUSY;
 		goto drop_free;
 	}
 	/* Check alignment and WDS frame formatting. The start of the packet should
@@ -152,7 +149,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 			if (unlikely(newskb == NULL)) {
 				printk(KERN_ERR "%s: Cannot allocate skb\n",
 				       ndev->name);
-				err = -ENOMEM;
 				goto drop_free;
 			}
 			newskb_offset = (4 - (long) newskb->data) & 0x03;
@@ -197,8 +193,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	if (unlikely(pci_map_address == 0)) {
 		printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
 		       ndev->name);
-
-		err = -EIO;
 		goto drop_free;
 	}
 	/* Place the fragment in the control block structure. */
@@ -246,7 +240,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 	ndev->stats.tx_dropped++;
 	spin_unlock_irqrestore(&priv->slock, flags);
 	dev_kfree_skb(skb);
-	return err;
+	return NETDEV_TX_OK;
 }
 
 static inline int
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index fa90d1d8d82..b10b0383dfa 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -892,7 +892,7 @@ static int ray_dev_init(struct net_device *dev)
 #endif /* RAY_IMMEDIATE_INIT */
 
 	/* copy mac and broadcast addresses to linux device */
-	memcpy(&dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
+	memcpy(dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
 	memset(dev->broadcast, 0xff, ETH_ALEN);
 
 	DEBUG(2, "ray_dev_init ending\n");
@@ -923,7 +923,7 @@ static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!(pcmcia_dev_present(link))) {
 		DEBUG(2, "ray_dev_start_xmit - device not present\n");
-		return -1;
+		return NETDEV_TX_LOCKED;
 	}
 	DEBUG(3, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
 	if (local->authentication_state == NEED_TO_AUTH) {
@@ -931,7 +931,7 @@ static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (!build_auth_frame(local, local->auth_id, OPEN_AUTH_REQUEST)) {
 			local->authentication_state = AUTHENTICATED;
 			netif_stop_queue(dev);
-			return 1;
+			return NETDEV_TX_BUSY;
 		}
 	}
 
@@ -944,7 +944,7 @@ static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	case XMIT_NO_CCS:
 	case XMIT_NEED_AUTH:
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	case XMIT_NO_INTR:
 	case XMIT_MSG_BAD:
 	case XMIT_OK:
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index bebf735cd4b..3bec3dbd345 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2,7 +2,7 @@
  * Driver for RNDIS based wireless USB devices.
  *
  * Copyright (C) 2007 by Bjorge Dijkstra <bjd@jooz.net>
- * Copyright (C) 2008 by Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ * Copyright (C) 2008-2009 by Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -42,6 +42,7 @@
 #include <linux/ctype.h>
 #include <linux/spinlock.h>
 #include <net/iw_handler.h>
+#include <net/cfg80211.h>
 #include <linux/usb/usbnet.h>
 #include <linux/usb/rndis_host.h>
 
@@ -156,43 +157,55 @@ MODULE_PARM_DESC(workaround_interval,
 #define NDIS_802_11_LENGTH_RATES_EX 16
 
 enum ndis_80211_net_type {
-	ndis_80211_type_freq_hop,
-	ndis_80211_type_direct_seq,
-	ndis_80211_type_ofdm_a,
-	ndis_80211_type_ofdm_g
+	NDIS_80211_TYPE_FREQ_HOP,
+	NDIS_80211_TYPE_DIRECT_SEQ,
+	NDIS_80211_TYPE_OFDM_A,
+	NDIS_80211_TYPE_OFDM_G
 };
 
 enum ndis_80211_net_infra {
-	ndis_80211_infra_adhoc,
-	ndis_80211_infra_infra,
-	ndis_80211_infra_auto_unknown
+	NDIS_80211_INFRA_ADHOC,
+	NDIS_80211_INFRA_INFRA,
+	NDIS_80211_INFRA_AUTO_UNKNOWN
 };
 
 enum ndis_80211_auth_mode {
-	ndis_80211_auth_open,
-	ndis_80211_auth_shared,
-	ndis_80211_auth_auto_switch,
-	ndis_80211_auth_wpa,
-	ndis_80211_auth_wpa_psk,
-	ndis_80211_auth_wpa_none,
-	ndis_80211_auth_wpa2,
-	ndis_80211_auth_wpa2_psk
+	NDIS_80211_AUTH_OPEN,
+	NDIS_80211_AUTH_SHARED,
+	NDIS_80211_AUTH_AUTO_SWITCH,
+	NDIS_80211_AUTH_WPA,
+	NDIS_80211_AUTH_WPA_PSK,
+	NDIS_80211_AUTH_WPA_NONE,
+	NDIS_80211_AUTH_WPA2,
+	NDIS_80211_AUTH_WPA2_PSK
 };
 
 enum ndis_80211_encr_status {
-	ndis_80211_encr_wep_enabled,
-	ndis_80211_encr_disabled,
-	ndis_80211_encr_wep_key_absent,
-	ndis_80211_encr_not_supported,
-	ndis_80211_encr_tkip_enabled,
-	ndis_80211_encr_tkip_key_absent,
-	ndis_80211_encr_ccmp_enabled,
-	ndis_80211_encr_ccmp_key_absent
+	NDIS_80211_ENCR_WEP_ENABLED,
+	NDIS_80211_ENCR_DISABLED,
+	NDIS_80211_ENCR_WEP_KEY_ABSENT,
+	NDIS_80211_ENCR_NOT_SUPPORTED,
+	NDIS_80211_ENCR_TKIP_ENABLED,
+	NDIS_80211_ENCR_TKIP_KEY_ABSENT,
+	NDIS_80211_ENCR_CCMP_ENABLED,
+	NDIS_80211_ENCR_CCMP_KEY_ABSENT
 };
 
 enum ndis_80211_priv_filter {
-	ndis_80211_priv_accept_all,
-	ndis_80211_priv_8021x_wep
+	NDIS_80211_PRIV_ACCEPT_ALL,
+	NDIS_80211_PRIV_8021X_WEP
+};
+
+enum ndis_80211_addkey_bits {
+	NDIS_80211_ADDKEY_8021X_AUTH = cpu_to_le32(1 << 28),
+	NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ = cpu_to_le32(1 << 29),
+	NDIS_80211_ADDKEY_PAIRWISE_KEY = cpu_to_le32(1 << 30),
+	NDIS_80211_ADDKEY_TRANSMIT_KEY = cpu_to_le32(1 << 31)
+};
+
+enum ndis_80211_addwep_bits {
+	NDIS_80211_ADDWEP_PERCLIENT_KEY = cpu_to_le32(1 << 30),
+	NDIS_80211_ADDWEP_TRANSMIT_KEY = cpu_to_le32(1 << 31)
 };
 
 struct ndis_80211_ssid {
@@ -308,7 +321,6 @@ enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
 #define CAP_MODE_80211B		2
 #define CAP_MODE_80211G		4
 #define CAP_MODE_MASK		7
-#define CAP_SUPPORT_TXPOWER	8
 
 #define WORK_LINK_UP		(1<<0)
 #define WORK_LINK_DOWN		(1<<1)
@@ -316,25 +328,61 @@ enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
 
 #define COMMAND_BUFFER_SIZE	(CONTROL_BUFFER_SIZE + sizeof(struct rndis_set))
 
-/* RNDIS device private data */
-struct rndis_wext_private {
-	char name[32];
+static const struct ieee80211_channel rndis_channels[] = {
+	{ .center_freq = 2412 },
+	{ .center_freq = 2417 },
+	{ .center_freq = 2422 },
+	{ .center_freq = 2427 },
+	{ .center_freq = 2432 },
+	{ .center_freq = 2437 },
+	{ .center_freq = 2442 },
+	{ .center_freq = 2447 },
+	{ .center_freq = 2452 },
+	{ .center_freq = 2457 },
+	{ .center_freq = 2462 },
+	{ .center_freq = 2467 },
+	{ .center_freq = 2472 },
+	{ .center_freq = 2484 },
+};
 
+static const struct ieee80211_rate rndis_rates[] = {
+	{ .bitrate = 10 },
+	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 60 },
+	{ .bitrate = 90 },
+	{ .bitrate = 120 },
+	{ .bitrate = 180 },
+	{ .bitrate = 240 },
+	{ .bitrate = 360 },
+	{ .bitrate = 480 },
+	{ .bitrate = 540 }
+};
+
+/* RNDIS device private data */
+struct rndis_wlan_private {
 	struct usbnet *usbdev;
 
+	struct wireless_dev wdev;
+
+	struct cfg80211_scan_request *scan_request;
+
 	struct workqueue_struct *workqueue;
 	struct delayed_work stats_work;
+	struct delayed_work scan_work;
 	struct work_struct work;
 	struct mutex command_lock;
 	spinlock_t stats_lock;
 	unsigned long work_pending;
 
+	struct ieee80211_supported_band band;
+	struct ieee80211_channel channels[ARRAY_SIZE(rndis_channels)];
+	struct ieee80211_rate rates[ARRAY_SIZE(rndis_rates)];
+
 	struct iw_statistics iwstats;
 	struct iw_statistics privstats;
 
-	int  nick_len;
-	char nick[32];
-
 	int caps;
 	int multicast_size;
 
@@ -357,6 +405,7 @@ struct rndis_wext_private {
 	int  encr_tx_key_index;
 	char encr_keys[4][32];
 	int  encr_key_len[4];
+	char encr_key_wpa[4];
 	int  wpa_version;
 	int  wpa_keymgmt;
 	int  wpa_authalg;
@@ -368,8 +417,22 @@ struct rndis_wext_private {
 	u8 command_buffer[COMMAND_BUFFER_SIZE];
 };
 
+/*
+ * cfg80211 ops
+ */
+static int rndis_change_virtual_intf(struct wiphy *wiphy, int ifindex,
+					enum nl80211_iftype type, u32 *flags,
+					struct vif_params *params);
+
+static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_scan_request *request);
 
-static const int rates_80211g[8] = { 6, 9, 12, 18, 24, 36, 48, 54 };
+static struct cfg80211_ops rndis_config_ops = {
+	.change_virtual_intf = rndis_change_virtual_intf,
+	.scan = rndis_scan,
+};
+
+static void *rndis_wiphy_privid = &rndis_wiphy_privid;
 
 static const int bcm4320_power_output[4] = { 25, 50, 75, 100 };
 
@@ -378,13 +441,13 @@ static const unsigned char ffff_bssid[ETH_ALEN] = { 0xff, 0xff, 0xff,
 							0xff, 0xff, 0xff };
 
 
-static struct rndis_wext_private *get_rndis_wext_priv(struct usbnet *dev)
+static struct rndis_wlan_private *get_rndis_wlan_priv(struct usbnet *dev)
 {
-	return (struct rndis_wext_private *)dev->driver_priv;
+	return (struct rndis_wlan_private *)dev->driver_priv;
 }
 
 
-static u32 get_bcm4320_power(struct rndis_wext_private *priv)
+static u32 get_bcm4320_power(struct rndis_wlan_private *priv)
 {
 	return BCM4320_DEFAULT_TXPOWER *
 		bcm4320_power_output[priv->param_power_output] / 100;
@@ -417,7 +480,7 @@ static int rndis_error_status(__le32 rndis_status)
 
 static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(dev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(dev);
 	union {
 		void			*buf;
 		struct rndis_msg_hdr	*header;
@@ -463,7 +526,7 @@ static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
 
 static int rndis_set_oid(struct usbnet *dev, __le32 oid, void *data, int len)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(dev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(dev);
 	union {
 		void			*buf;
 		struct rndis_msg_hdr	*header;
@@ -584,7 +647,7 @@ static int rndis_set_config_parameter(struct usbnet *dev, char *param,
 	ret = rndis_set_oid(dev, OID_GEN_RNDIS_CONFIG_PARAMETER,
 							infobuf, info_len);
 	if (ret != 0)
-		devdbg(dev, "setting rndis config paramater failed, %d.", ret);
+		devdbg(dev, "setting rndis config parameter failed, %d.", ret);
 
 	kfree(infobuf);
 	return ret;
@@ -684,7 +747,7 @@ static int get_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
 
 static int set_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret;
 
 	ret = rndis_set_oid(usbdev, OID_802_11_SSID, ssid, sizeof(*ssid));
@@ -731,7 +794,7 @@ static int is_associated(struct usbnet *usbdev)
 
 static int disassociate(struct usbnet *usbdev, int reset_ssid)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct ndis_80211_ssid ssid;
 	int i, ret = 0;
 
@@ -763,7 +826,7 @@ static int disassociate(struct usbnet *usbdev, int reset_ssid)
 
 static int set_auth_mode(struct usbnet *usbdev, int wpa_version, int authalg)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 	int auth_mode, ret;
 
@@ -772,23 +835,23 @@ static int set_auth_mode(struct usbnet *usbdev, int wpa_version, int authalg)
 
 	if (wpa_version & IW_AUTH_WPA_VERSION_WPA2) {
 		if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_802_1X)
-			auth_mode = ndis_80211_auth_wpa2;
+			auth_mode = NDIS_80211_AUTH_WPA2;
 		else
-			auth_mode = ndis_80211_auth_wpa2_psk;
+			auth_mode = NDIS_80211_AUTH_WPA2_PSK;
 	} else if (wpa_version & IW_AUTH_WPA_VERSION_WPA) {
 		if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_802_1X)
-			auth_mode = ndis_80211_auth_wpa;
+			auth_mode = NDIS_80211_AUTH_WPA;
 		else if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_PSK)
-			auth_mode = ndis_80211_auth_wpa_psk;
+			auth_mode = NDIS_80211_AUTH_WPA_PSK;
 		else
-			auth_mode = ndis_80211_auth_wpa_none;
+			auth_mode = NDIS_80211_AUTH_WPA_NONE;
 	} else if (authalg & IW_AUTH_ALG_SHARED_KEY) {
 		if (authalg & IW_AUTH_ALG_OPEN_SYSTEM)
-			auth_mode = ndis_80211_auth_auto_switch;
+			auth_mode = NDIS_80211_AUTH_AUTO_SWITCH;
 		else
-			auth_mode = ndis_80211_auth_shared;
+			auth_mode = NDIS_80211_AUTH_SHARED;
 	} else
-		auth_mode = ndis_80211_auth_open;
+		auth_mode = NDIS_80211_AUTH_OPEN;
 
 	tmp = cpu_to_le32(auth_mode);
 	ret = rndis_set_oid(usbdev, OID_802_11_AUTHENTICATION_MODE, &tmp,
@@ -806,16 +869,16 @@ static int set_auth_mode(struct usbnet *usbdev, int wpa_version, int authalg)
 
 static int set_priv_filter(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 
 	devdbg(usbdev, "set_priv_filter: wpa_version=0x%x", priv->wpa_version);
 
 	if (priv->wpa_version & IW_AUTH_WPA_VERSION_WPA2 ||
 	    priv->wpa_version & IW_AUTH_WPA_VERSION_WPA)
-		tmp = cpu_to_le32(ndis_80211_priv_8021x_wep);
+		tmp = cpu_to_le32(NDIS_80211_PRIV_8021X_WEP);
 	else
-		tmp = cpu_to_le32(ndis_80211_priv_accept_all);
+		tmp = cpu_to_le32(NDIS_80211_PRIV_ACCEPT_ALL);
 
 	return rndis_set_oid(usbdev, OID_802_11_PRIVACY_FILTER, &tmp,
 								sizeof(tmp));
@@ -824,7 +887,7 @@ static int set_priv_filter(struct usbnet *usbdev)
 
 static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 	int encr_mode, ret;
 
@@ -833,18 +896,18 @@ static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
 		groupwise);
 
 	if (pairwise & IW_AUTH_CIPHER_CCMP)
-		encr_mode = ndis_80211_encr_ccmp_enabled;
+		encr_mode = NDIS_80211_ENCR_CCMP_ENABLED;
 	else if (pairwise & IW_AUTH_CIPHER_TKIP)
-		encr_mode = ndis_80211_encr_tkip_enabled;
+		encr_mode = NDIS_80211_ENCR_TKIP_ENABLED;
 	else if (pairwise &
 		 (IW_AUTH_CIPHER_WEP40 | IW_AUTH_CIPHER_WEP104))
-		encr_mode = ndis_80211_encr_wep_enabled;
+		encr_mode = NDIS_80211_ENCR_WEP_ENABLED;
 	else if (groupwise & IW_AUTH_CIPHER_CCMP)
-		encr_mode = ndis_80211_encr_ccmp_enabled;
+		encr_mode = NDIS_80211_ENCR_CCMP_ENABLED;
 	else if (groupwise & IW_AUTH_CIPHER_TKIP)
-		encr_mode = ndis_80211_encr_tkip_enabled;
+		encr_mode = NDIS_80211_ENCR_TKIP_ENABLED;
 	else
-		encr_mode = ndis_80211_encr_disabled;
+		encr_mode = NDIS_80211_ENCR_DISABLED;
 
 	tmp = cpu_to_le32(encr_mode);
 	ret = rndis_set_oid(usbdev, OID_802_11_ENCRYPTION_STATUS, &tmp,
@@ -862,7 +925,7 @@ static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
 
 static int set_assoc_params(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	set_auth_mode(usbdev, priv->wpa_version, priv->wpa_authalg);
 	set_priv_filter(usbdev);
@@ -874,7 +937,7 @@ static int set_assoc_params(struct usbnet *usbdev)
 
 static int set_infra_mode(struct usbnet *usbdev, int mode)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tmp;
 	int ret, i;
 
@@ -894,7 +957,7 @@ static int set_infra_mode(struct usbnet *usbdev, int mode)
 	if (priv->wpa_keymgmt == 0 ||
 		priv->wpa_keymgmt == IW_AUTH_KEY_MGMT_802_1X) {
 		for (i = 0; i < 4; i++) {
-			if (priv->encr_key_len[i] > 0)
+			if (priv->encr_key_len[i] > 0 && !priv->encr_key_wpa[i])
 				add_wep_key(usbdev, priv->encr_keys[i],
 						priv->encr_key_len[i], i);
 		}
@@ -907,12 +970,12 @@ static int set_infra_mode(struct usbnet *usbdev, int mode)
 
 static void set_default_iw_params(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	priv->wpa_keymgmt = 0;
 	priv->wpa_version = 0;
 
-	set_infra_mode(usbdev, ndis_80211_infra_infra);
+	set_infra_mode(usbdev, NDIS_80211_INFRA_INFRA);
 	set_auth_mode(usbdev, IW_AUTH_WPA_VERSION_DISABLED,
 				IW_AUTH_ALG_OPEN_SYSTEM);
 	set_priv_filter(usbdev);
@@ -933,7 +996,7 @@ static int deauthenticate(struct usbnet *usbdev)
 /* index must be 0 - N, as per NDIS  */
 static int add_wep_key(struct usbnet *usbdev, char *key, int key_len, int index)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct ndis_80211_wep_key ndis_key;
 	int ret;
 
@@ -948,7 +1011,7 @@ static int add_wep_key(struct usbnet *usbdev, char *key, int key_len, int index)
 	memcpy(&ndis_key.material, key, key_len);
 
 	if (index == priv->encr_tx_key_index) {
-		ndis_key.index |= cpu_to_le32(1 << 31);
+		ndis_key.index |= NDIS_80211_ADDWEP_TRANSMIT_KEY;
 		ret = set_encr_mode(usbdev, IW_AUTH_CIPHER_WEP104,
 						IW_AUTH_CIPHER_NONE);
 		if (ret)
@@ -965,16 +1028,85 @@ static int add_wep_key(struct usbnet *usbdev, char *key, int key_len, int index)
 	}
 
 	priv->encr_key_len[index] = key_len;
+	priv->encr_key_wpa[index] = 0;
 	memcpy(&priv->encr_keys[index], key, key_len);
 
 	return 0;
 }
 
 
+static int add_wpa_key(struct usbnet *usbdev, const u8 *key, int key_len,
+			int index, const struct sockaddr *addr,
+			const u8 *rx_seq, int alg, int flags)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	struct ndis_80211_key ndis_key;
+	int ret;
+
+	if (index < 0 || index >= 4)
+		return -EINVAL;
+	if (key_len > sizeof(ndis_key.material) || key_len < 0)
+		return -EINVAL;
+	if ((flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ) && !rx_seq)
+		return -EINVAL;
+	if ((flags & NDIS_80211_ADDKEY_PAIRWISE_KEY) && !addr)
+		return -EINVAL;
+
+	devdbg(usbdev, "add_wpa_key(%i): flags:%i%i%i", index,
+			!!(flags & NDIS_80211_ADDKEY_TRANSMIT_KEY),
+			!!(flags & NDIS_80211_ADDKEY_PAIRWISE_KEY),
+			!!(flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ));
+
+	memset(&ndis_key, 0, sizeof(ndis_key));
+
+	ndis_key.size = cpu_to_le32(sizeof(ndis_key) -
+				sizeof(ndis_key.material) + key_len);
+	ndis_key.length = cpu_to_le32(key_len);
+	ndis_key.index = cpu_to_le32(index) | flags;
+
+	if (alg == IW_ENCODE_ALG_TKIP && key_len == 32) {
+		/* wpa_supplicant gives us the Michael MIC RX/TX keys in
+		 * different order than NDIS spec, so swap the order here. */
+		memcpy(ndis_key.material, key, 16);
+		memcpy(ndis_key.material + 16, key + 24, 8);
+		memcpy(ndis_key.material + 24, key + 16, 8);
+	} else
+		memcpy(ndis_key.material, key, key_len);
+
+	if (flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ)
+		memcpy(ndis_key.rsc, rx_seq, 6);
+
+	if (flags & NDIS_80211_ADDKEY_PAIRWISE_KEY) {
+		/* pairwise key */
+		memcpy(ndis_key.bssid, addr->sa_data, ETH_ALEN);
+	} else {
+		/* group key */
+		if (priv->infra_mode == NDIS_80211_INFRA_ADHOC)
+			memset(ndis_key.bssid, 0xff, ETH_ALEN);
+		else
+			get_bssid(usbdev, ndis_key.bssid);
+	}
+
+	ret = rndis_set_oid(usbdev, OID_802_11_ADD_KEY, &ndis_key,
+					le32_to_cpu(ndis_key.size));
+	devdbg(usbdev, "add_wpa_key: OID_802_11_ADD_KEY -> %08X", ret);
+	if (ret != 0)
+		return ret;
+
+	priv->encr_key_len[index] = key_len;
+	priv->encr_key_wpa[index] = 1;
+
+	if (flags & NDIS_80211_ADDKEY_TRANSMIT_KEY)
+		priv->encr_tx_key_index = index;
+
+	return 0;
+}
+
+
 /* remove_key is for both wep and wpa */
 static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct ndis_80211_remove_key remove_key;
 	__le32 keyindex;
 	int ret;
@@ -983,6 +1115,7 @@ static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
 		return 0;
 
 	priv->encr_key_len[index] = 0;
+	priv->encr_key_wpa[index] = 0;
 	memset(&priv->encr_keys[index], 0, sizeof(priv->encr_keys[index]));
 
 	if (priv->wpa_cipher_pair == IW_AUTH_CIPHER_TKIP ||
@@ -994,7 +1127,8 @@ static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
 		if (bssid) {
 			/* pairwise key */
 			if (memcmp(bssid, ffff_bssid, ETH_ALEN) != 0)
-				remove_key.index |= cpu_to_le32(1 << 30);
+				remove_key.index |=
+					NDIS_80211_ADDKEY_PAIRWISE_KEY;
 			memcpy(remove_key.bssid, bssid,
 					sizeof(remove_key.bssid));
 		} else
@@ -1027,7 +1161,7 @@ static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
 
 static void set_multicast_list(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct dev_mc_list *mclist;
 	__le32 filter;
 	int ret, i, size;
@@ -1086,131 +1220,180 @@ static void set_multicast_list(struct usbnet *usbdev)
 
 
 /*
- * wireless extension handlers
+ * cfg80211 ops
  */
-
-static int rndis_iw_commit(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
+static int rndis_change_virtual_intf(struct wiphy *wiphy, int ifindex,
+					enum nl80211_iftype type, u32 *flags,
+					struct vif_params *params)
 {
-	/* dummy op */
-	return 0;
+	struct net_device *dev;
+	struct usbnet *usbdev;
+	int mode;
+
+	/* we're under RTNL */
+	dev = __dev_get_by_index(&init_net, ifindex);
+	if (!dev)
+		return -ENODEV;
+	usbdev = netdev_priv(dev);
+
+	switch (type) {
+	case NL80211_IFTYPE_ADHOC:
+		mode = NDIS_80211_INFRA_ADHOC;
+		break;
+	case NL80211_IFTYPE_STATION:
+		mode = NDIS_80211_INFRA_INFRA;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return set_infra_mode(usbdev, mode);
 }
 
 
-static int rndis_iw_get_range(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
+#define SCAN_DELAY_JIFFIES (HZ)
+static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_scan_request *request)
 {
-	struct iw_range *range = (struct iw_range *)extra;
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-	int len, ret, i, j, num, has_80211g_rates;
-	u8 rates[8];
-	__le32 tx_power;
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	int ret;
+	__le32 tmp;
+
+	devdbg(usbdev, "cfg80211.scan");
 
-	devdbg(usbdev, "SIOCGIWRANGE");
+	if (!request)
+		return -EINVAL;
 
-	/* clear iw_range struct */
-	memset(range, 0, sizeof(*range));
-	wrqu->data.length = sizeof(*range);
+	if (priv->scan_request && priv->scan_request != request)
+		return -EBUSY;
 
-	range->txpower_capa = IW_TXPOW_MWATT;
-	range->num_txpower = 1;
-	if (priv->caps & CAP_SUPPORT_TXPOWER) {
-		len = sizeof(tx_power);
-		ret = rndis_query_oid(usbdev, OID_802_11_TX_POWER_LEVEL,
-						&tx_power, &len);
-		if (ret == 0 && le32_to_cpu(tx_power) != 0xFF)
-			range->txpower[0] = le32_to_cpu(tx_power);
-		else
-			range->txpower[0] = get_bcm4320_power(priv);
-	} else
-		range->txpower[0] = get_bcm4320_power(priv);
+	priv->scan_request = request;
 
-	len = sizeof(rates);
-	ret = rndis_query_oid(usbdev, OID_802_11_SUPPORTED_RATES, &rates,
-								&len);
-	has_80211g_rates = 0;
+	tmp = cpu_to_le32(1);
+	ret = rndis_set_oid(usbdev, OID_802_11_BSSID_LIST_SCAN, &tmp,
+							sizeof(tmp));
 	if (ret == 0) {
-		j = 0;
-		for (i = 0; i < len; i++) {
-			if (rates[i] == 0)
-				break;
-			range->bitrate[j] = (rates[i] & 0x7f) * 500000;
-			/* check for non 802.11b rates */
-			if (range->bitrate[j] == 6000000 ||
-				range->bitrate[j] == 9000000 ||
-				(range->bitrate[j] >= 12000000 &&
-				range->bitrate[j] != 22000000))
-				has_80211g_rates = 1;
-			j++;
-		}
-		range->num_bitrates = j;
-	} else
-		range->num_bitrates = 0;
-
-	/* fill in 802.11g rates */
-	if (has_80211g_rates) {
-		num = range->num_bitrates;
-		for (i = 0; i < ARRAY_SIZE(rates_80211g); i++) {
-			for (j = 0; j < num; j++) {
-				if (range->bitrate[j] ==
-					rates_80211g[i] * 1000000)
-					break;
-			}
-			if (j == num)
-				range->bitrate[range->num_bitrates++] =
-					rates_80211g[i] * 1000000;
-			if (range->num_bitrates == IW_MAX_BITRATES)
-				break;
-		}
+		/* Wait before retrieving scan results from device */
+		queue_delayed_work(priv->workqueue, &priv->scan_work,
+			SCAN_DELAY_JIFFIES);
+	}
 
-		/* estimated max real througput in bps */
-		range->throughput = 54 * 1000 * 1000 / 2;
+	return ret;
+}
 
-		/* ~35%	more with afterburner */
-		if (priv->param_afterburner)
-			range->throughput = range->throughput / 100 * 135;
-	} else {
-		/* estimated max real througput in bps */
-		range->throughput = 11 * 1000 * 1000 / 2;
+
+static struct cfg80211_bss *rndis_bss_info_update(struct usbnet *usbdev,
+					struct ndis_80211_bssid_ex *bssid)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	struct ieee80211_channel *channel;
+	s32 signal;
+	u64 timestamp;
+	u16 capability;
+	u16 beacon_interval;
+	struct ndis_80211_fixed_ies *fixed;
+	int ie_len, bssid_len;
+	u8 *ie;
+
+	/* parse bssid structure */
+	bssid_len = le32_to_cpu(bssid->length);
+
+	if (bssid_len < sizeof(struct ndis_80211_bssid_ex) +
+			sizeof(struct ndis_80211_fixed_ies))
+		return NULL;
+
+	fixed = (struct ndis_80211_fixed_ies *)bssid->ies;
+
+	ie = (void *)(bssid->ies + sizeof(struct ndis_80211_fixed_ies));
+	ie_len = min(bssid_len - (int)sizeof(*bssid),
+					(int)le32_to_cpu(bssid->ie_length));
+	ie_len -= sizeof(struct ndis_80211_fixed_ies);
+	if (ie_len < 0)
+		return NULL;
+
+	/* extract data for cfg80211_inform_bss */
+	channel = ieee80211_get_channel(priv->wdev.wiphy,
+			KHZ_TO_MHZ(le32_to_cpu(bssid->config.ds_config)));
+	if (!channel)
+		return NULL;
+
+	signal = level_to_qual(le32_to_cpu(bssid->rssi));
+	timestamp = le64_to_cpu(*(__le64 *)fixed->timestamp);
+	capability = le16_to_cpu(fixed->capabilities);
+	beacon_interval = le16_to_cpu(fixed->beacon_interval);
+
+	return cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid->mac,
+		timestamp, capability, beacon_interval, ie, ie_len, signal,
+		GFP_KERNEL);
+}
+
+
+static int rndis_check_bssid_list(struct usbnet *usbdev)
+{
+	void *buf = NULL;
+	struct ndis_80211_bssid_list_ex *bssid_list;
+	struct ndis_80211_bssid_ex *bssid;
+	int ret = -EINVAL, len, count, bssid_len;
+
+	devdbg(usbdev, "check_bssid_list");
+
+	len = CONTROL_BUFFER_SIZE;
+	buf = kmalloc(len, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto out;
 	}
 
-	range->num_channels = 14;
+	ret = rndis_query_oid(usbdev, OID_802_11_BSSID_LIST, buf, &len);
+	if (ret != 0)
+		goto out;
 
-	for (i = 0; (i < 14) && (i < IW_MAX_FREQUENCIES); i++) {
-		range->freq[i].i = i + 1;
-		range->freq[i].m = ieee80211_dsss_chan_to_freq(i + 1) * 100000;
-		range->freq[i].e = 1;
+	bssid_list = buf;
+	bssid = bssid_list->bssid;
+	bssid_len = le32_to_cpu(bssid->length);
+	count = le32_to_cpu(bssid_list->num_items);
+	devdbg(usbdev, "check_bssid_list: %d BSSIDs found", count);
+
+	while (count && ((void *)bssid + bssid_len) <= (buf + len)) {
+		rndis_bss_info_update(usbdev, bssid);
+
+		bssid = (void *)bssid + bssid_len;
+		bssid_len = le32_to_cpu(bssid->length);
+		count--;
 	}
-	range->num_frequency = i;
 
-	range->min_rts = 0;
-	range->max_rts = 2347;
-	range->min_frag = 256;
-	range->max_frag = 2346;
+out:
+	kfree(buf);
+	return ret;
+}
 
-	range->max_qual.qual = 100;
-	range->max_qual.level = 154;
-	range->max_qual.updated = IW_QUAL_QUAL_UPDATED
-				| IW_QUAL_LEVEL_UPDATED
-				| IW_QUAL_NOISE_INVALID;
 
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = WIRELESS_EXT;
+static void rndis_get_scan_results(struct work_struct *work)
+{
+	struct rndis_wlan_private *priv =
+		container_of(work, struct rndis_wlan_private, scan_work.work);
+	struct usbnet *usbdev = priv->usbdev;
+	int ret;
+
+	devdbg(usbdev, "get_scan_results");
 
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-			IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-	return 0;
+	ret = rndis_check_bssid_list(usbdev);
+
+	cfg80211_scan_done(priv->scan_request, ret < 0);
+
+	priv->scan_request = NULL;
 }
 
 
-static int rndis_iw_get_name(struct net_device *dev,
+/*
+ * wireless extension handlers
+ */
+
+static int rndis_iw_commit(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
-	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	strcpy(wrqu->name, priv->name);
+	/* dummy op */
 	return 0;
 }
 
@@ -1314,7 +1497,7 @@ static int rndis_iw_set_auth(struct net_device *dev,
 {
 	struct iw_param *p = &wrqu->param;
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret = -ENOTSUPP;
 
 	switch (p->flags & IW_AUTH_INDEX) {
@@ -1395,7 +1578,7 @@ static int rndis_iw_get_auth(struct net_device *dev,
 {
 	struct iw_param *p = &wrqu->param;
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	switch (p->flags & IW_AUTH_INDEX) {
 	case IW_AUTH_WPA_VERSION:
@@ -1422,60 +1605,11 @@ static int rndis_iw_get_auth(struct net_device *dev,
 }
 
 
-static int rndis_iw_get_mode(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	switch (priv->infra_mode) {
-	case ndis_80211_infra_adhoc:
-		wrqu->mode = IW_MODE_ADHOC;
-		break;
-	case ndis_80211_infra_infra:
-		wrqu->mode = IW_MODE_INFRA;
-		break;
-	/*case ndis_80211_infra_auto_unknown:*/
-	default:
-		wrqu->mode = IW_MODE_AUTO;
-		break;
-	}
-	devdbg(usbdev, "SIOCGIWMODE: %08x", wrqu->mode);
-	return 0;
-}
-
-
-static int rndis_iw_set_mode(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	int mode;
-
-	devdbg(usbdev, "SIOCSIWMODE: %08x", wrqu->mode);
-
-	switch (wrqu->mode) {
-	case IW_MODE_ADHOC:
-		mode = ndis_80211_infra_adhoc;
-		break;
-	case IW_MODE_INFRA:
-		mode = ndis_80211_infra_infra;
-		break;
-	/*case IW_MODE_AUTO:*/
-	default:
-		mode = ndis_80211_infra_auto_unknown;
-		break;
-	}
-
-	return set_infra_mode(usbdev, mode);
-}
-
-
 static int rndis_iw_set_encode(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret, index, key_len;
 	u8 *key;
 
@@ -1538,10 +1672,8 @@ static int rndis_iw_set_encode_ext(struct net_device *dev,
 {
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-	struct ndis_80211_key ndis_key;
-	int keyidx, ret;
-	u8 *addr;
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	int keyidx, flags;
 
 	keyidx = wrqu->encoding.flags & IW_ENCODE_INDEX;
 
@@ -1564,250 +1696,16 @@ static int rndis_iw_set_encode_ext(struct net_device *dev,
 	    ext->alg == IW_ENCODE_ALG_NONE || ext->key_len == 0)
 		return remove_key(usbdev, keyidx, NULL);
 
-	if (ext->key_len > sizeof(ndis_key.material))
-		return -1;
-
-	memset(&ndis_key, 0, sizeof(ndis_key));
-
-	ndis_key.size = cpu_to_le32(sizeof(ndis_key) -
-				sizeof(ndis_key.material) + ext->key_len);
-	ndis_key.length = cpu_to_le32(ext->key_len);
-	ndis_key.index = cpu_to_le32(keyidx);
-
-	if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
-		memcpy(ndis_key.rsc, ext->rx_seq, 6);
-		ndis_key.index |= cpu_to_le32(1 << 29);
-	}
-
-	addr = ext->addr.sa_data;
-	if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
-		/* group key */
-		if (priv->infra_mode == ndis_80211_infra_adhoc)
-			memset(ndis_key.bssid, 0xff, ETH_ALEN);
-		else
-			get_bssid(usbdev, ndis_key.bssid);
-	} else {
-		/* pairwise key */
-		ndis_key.index |= cpu_to_le32(1 << 30);
-		memcpy(ndis_key.bssid, addr, ETH_ALEN);
-	}
-
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-		ndis_key.index |= cpu_to_le32(1 << 31);
-
-	if (ext->alg == IW_ENCODE_ALG_TKIP && ext->key_len == 32) {
-		/* wpa_supplicant gives us the Michael MIC RX/TX keys in
-		 * different order than NDIS spec, so swap the order here. */
-		memcpy(ndis_key.material, ext->key, 16);
-		memcpy(ndis_key.material + 16, ext->key + 24, 8);
-		memcpy(ndis_key.material + 24, ext->key + 16, 8);
-	} else
-		memcpy(ndis_key.material, ext->key, ext->key_len);
-
-	ret = rndis_set_oid(usbdev, OID_802_11_ADD_KEY, &ndis_key,
-					le32_to_cpu(ndis_key.size));
-	devdbg(usbdev, "SIOCSIWENCODEEXT: OID_802_11_ADD_KEY -> %08X", ret);
-	if (ret != 0)
-		return ret;
-
-	priv->encr_key_len[keyidx] = ext->key_len;
-	memcpy(&priv->encr_keys[keyidx], ndis_key.material, ext->key_len);
+	flags = 0;
+	if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
+		flags |= NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ;
+	if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY))
+		flags |= NDIS_80211_ADDKEY_PAIRWISE_KEY;
 	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
-		priv->encr_tx_key_index = keyidx;
-
-	return 0;
-}
-
-
-static int rndis_iw_set_scan(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	union iwreq_data evt;
-	int ret = -EINVAL;
-	__le32 tmp;
-
-	devdbg(usbdev, "SIOCSIWSCAN");
-
-	if (wrqu->data.flags == 0) {
-		tmp = cpu_to_le32(1);
-		ret = rndis_set_oid(usbdev, OID_802_11_BSSID_LIST_SCAN, &tmp,
-								sizeof(tmp));
-		evt.data.flags = 0;
-		evt.data.length = 0;
-		wireless_send_event(dev, SIOCGIWSCAN, &evt, NULL);
-	}
-	return ret;
-}
-
-
-static char *rndis_translate_scan(struct net_device *dev,
-				  struct iw_request_info *info, char *cev,
-				  char *end_buf,
-				  struct ndis_80211_bssid_ex *bssid)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	u8 *ie;
-	char *current_val;
-	int bssid_len, ie_len, i;
-	u32 beacon, atim;
-	struct iw_event iwe;
-	unsigned char sbuf[32];
-
-	bssid_len = le32_to_cpu(bssid->length);
-
-	devdbg(usbdev, "BSSID %pM", bssid->mac);
-	iwe.cmd = SIOCGIWAP;
-	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-	memcpy(iwe.u.ap_addr.sa_data, bssid->mac, ETH_ALEN);
-	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_ADDR_LEN);
-
-	devdbg(usbdev, "SSID(%d) %s", le32_to_cpu(bssid->ssid.length),
-						bssid->ssid.essid);
-	iwe.cmd = SIOCGIWESSID;
-	iwe.u.essid.length = le32_to_cpu(bssid->ssid.length);
-	iwe.u.essid.flags = 1;
-	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, bssid->ssid.essid);
-
-	devdbg(usbdev, "MODE %d", le32_to_cpu(bssid->net_infra));
-	iwe.cmd = SIOCGIWMODE;
-	switch (le32_to_cpu(bssid->net_infra)) {
-	case ndis_80211_infra_adhoc:
-		iwe.u.mode = IW_MODE_ADHOC;
-		break;
-	case ndis_80211_infra_infra:
-		iwe.u.mode = IW_MODE_INFRA;
-		break;
-	/*case ndis_80211_infra_auto_unknown:*/
-	default:
-		iwe.u.mode = IW_MODE_AUTO;
-		break;
-	}
-	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_UINT_LEN);
-
-	devdbg(usbdev, "FREQ %d kHz", le32_to_cpu(bssid->config.ds_config));
-	iwe.cmd = SIOCGIWFREQ;
-	dsconfig_to_freq(le32_to_cpu(bssid->config.ds_config), &iwe.u.freq);
-	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_FREQ_LEN);
-
-	devdbg(usbdev, "QUAL %d", le32_to_cpu(bssid->rssi));
-	iwe.cmd = IWEVQUAL;
-	iwe.u.qual.qual  = level_to_qual(le32_to_cpu(bssid->rssi));
-	iwe.u.qual.level = le32_to_cpu(bssid->rssi);
-	iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED
-			| IW_QUAL_LEVEL_UPDATED
-			| IW_QUAL_NOISE_INVALID;
-	cev = iwe_stream_add_event(info, cev, end_buf, &iwe, IW_EV_QUAL_LEN);
-
-	devdbg(usbdev, "ENCODE %d", le32_to_cpu(bssid->privacy));
-	iwe.cmd = SIOCGIWENCODE;
-	iwe.u.data.length = 0;
-	if (le32_to_cpu(bssid->privacy) == ndis_80211_priv_accept_all)
-		iwe.u.data.flags = IW_ENCODE_DISABLED;
-	else
-		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-
-	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, NULL);
-
-	devdbg(usbdev, "RATES:");
-	current_val = cev + iwe_stream_lcp_len(info);
-	iwe.cmd = SIOCGIWRATE;
-	for (i = 0; i < sizeof(bssid->rates); i++) {
-		if (bssid->rates[i] & 0x7f) {
-			iwe.u.bitrate.value =
-				((bssid->rates[i] & 0x7f) *
-				500000);
-			devdbg(usbdev, " %d", iwe.u.bitrate.value);
-			current_val = iwe_stream_add_value(info, cev,
-				current_val, end_buf, &iwe,
-				IW_EV_PARAM_LEN);
-		}
-	}
-
-	if ((current_val - cev) > iwe_stream_lcp_len(info))
-		cev = current_val;
-
-	beacon = le32_to_cpu(bssid->config.beacon_period);
-	devdbg(usbdev, "BCN_INT %d", beacon);
-	iwe.cmd = IWEVCUSTOM;
-	snprintf(sbuf, sizeof(sbuf), "bcn_int=%d", beacon);
-	iwe.u.data.length = strlen(sbuf);
-	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf);
-
-	atim = le32_to_cpu(bssid->config.atim_window);
-	devdbg(usbdev, "ATIM %d", atim);
-	iwe.cmd = IWEVCUSTOM;
-	snprintf(sbuf, sizeof(sbuf), "atim=%u", atim);
-	iwe.u.data.length = strlen(sbuf);
-	cev = iwe_stream_add_point(info, cev, end_buf, &iwe, sbuf);
-
-	ie = (void *)(bssid->ies + sizeof(struct ndis_80211_fixed_ies));
-	ie_len = min(bssid_len - (int)sizeof(*bssid),
-					(int)le32_to_cpu(bssid->ie_length));
-	ie_len -= sizeof(struct ndis_80211_fixed_ies);
-	while (ie_len >= 2 && 2 + ie[1] <= ie_len) {
-		if ((ie[0] == WLAN_EID_GENERIC && ie[1] >= 4 &&
-		     memcmp(ie + 2, "\x00\x50\xf2\x01", 4) == 0) ||
-		    ie[0] == WLAN_EID_RSN) {
-			devdbg(usbdev, "IE: WPA%d",
-					(ie[0] == WLAN_EID_RSN) ? 2 : 1);
-			iwe.cmd = IWEVGENIE;
-			/* arbitrary cut-off at 64 */
-			iwe.u.data.length = min(ie[1] + 2, 64);
-			cev = iwe_stream_add_point(info, cev, end_buf, &iwe, ie);
-		}
-
-		ie_len -= 2 + ie[1];
-		ie += 2 + ie[1];
-	}
-
-	return cev;
-}
-
-
-static int rndis_iw_get_scan(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	void *buf = NULL;
-	char *cev = extra;
-	struct ndis_80211_bssid_list_ex *bssid_list;
-	struct ndis_80211_bssid_ex *bssid;
-	int ret = -EINVAL, len, count, bssid_len;
-
-	devdbg(usbdev, "SIOCGIWSCAN");
+		flags |= NDIS_80211_ADDKEY_TRANSMIT_KEY;
 
-	len = CONTROL_BUFFER_SIZE;
-	buf = kmalloc(len, GFP_KERNEL);
-	if (!buf) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	ret = rndis_query_oid(usbdev, OID_802_11_BSSID_LIST, buf, &len);
-
-	if (ret != 0)
-		goto out;
-
-	bssid_list = buf;
-	bssid = bssid_list->bssid;
-	bssid_len = le32_to_cpu(bssid->length);
-	count = le32_to_cpu(bssid_list->num_items);
-	devdbg(usbdev, "SIOCGIWSCAN: %d BSSIDs found", count);
-
-	while (count && ((void *)bssid + bssid_len) <= (buf + len)) {
-		cev = rndis_translate_scan(dev, info, cev,
-					   extra + IW_SCAN_MAX_DATA, bssid);
-		bssid = (void *)bssid + bssid_len;
-		bssid_len = le32_to_cpu(bssid->length);
-		count--;
-	}
-
-out:
-	wrqu->data.length = cev - extra;
-	wrqu->data.flags = 0;
-	kfree(buf);
-	return ret;
+	return add_wpa_key(usbdev, ext->key, ext->key_len, keyidx, &ext->addr,
+				ext->rx_seq, ext->alg, flags);
 }
 
 
@@ -1815,7 +1713,7 @@ static int rndis_iw_set_genie(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret = 0;
 
 #ifdef DEBUG
@@ -1849,7 +1747,7 @@ static int rndis_iw_get_genie(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	devdbg(usbdev, "SIOCGIWGENIE");
 
@@ -1936,39 +1834,6 @@ static int rndis_iw_get_frag(struct net_device *dev,
 }
 
 
-static int rndis_iw_set_nick(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	devdbg(usbdev, "SIOCSIWNICK");
-
-	priv->nick_len = wrqu->data.length;
-	if (priv->nick_len > 32)
-		priv->nick_len = 32;
-
-	memcpy(priv->nick, extra, priv->nick_len);
-	return 0;
-}
-
-
-static int rndis_iw_get_nick(struct net_device *dev,
-    struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
-	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	wrqu->data.flags = 1;
-	wrqu->data.length = priv->nick_len;
-	memcpy(extra, priv->nick, priv->nick_len);
-
-	devdbg(usbdev, "SIOCGIWNICK: '%s'", priv->nick);
-
-	return 0;
-}
-
-
 static int rndis_iw_set_freq(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
@@ -2021,20 +1886,12 @@ static int rndis_iw_get_txpower(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tx_power;
-	int ret = 0, len;
 
 	if (priv->radio_on) {
-		if (priv->caps & CAP_SUPPORT_TXPOWER) {
-			len = sizeof(tx_power);
-			ret = rndis_query_oid(usbdev, OID_802_11_TX_POWER_LEVEL,
-							&tx_power, &len);
-			if (ret != 0)
-				return ret;
-		} else
-			/* fake incase not supported */
-			tx_power = cpu_to_le32(get_bcm4320_power(priv));
+		/* fake since changing tx_power (by userlevel) not supported */
+		tx_power = cpu_to_le32(get_bcm4320_power(priv));
 
 		wrqu->txpower.flags = IW_TXPOW_MWATT;
 		wrqu->txpower.value = le32_to_cpu(tx_power);
@@ -2047,7 +1904,7 @@ static int rndis_iw_get_txpower(struct net_device *dev,
 
 	devdbg(usbdev, "SIOCGIWTXPOW: %d", wrqu->txpower.value);
 
-	return ret;
+	return 0;
 }
 
 
@@ -2055,9 +1912,8 @@ static int rndis_iw_set_txpower(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	__le32 tx_power = 0;
-	int ret = 0;
 
 	if (!wrqu->txpower.disabled) {
 		if (wrqu->txpower.flags == IW_TXPOW_MWATT)
@@ -2080,22 +1936,10 @@ static int rndis_iw_set_txpower(struct net_device *dev,
 	devdbg(usbdev, "SIOCSIWTXPOW: %d", le32_to_cpu(tx_power));
 
 	if (le32_to_cpu(tx_power) != 0) {
-		if (priv->caps & CAP_SUPPORT_TXPOWER) {
-			/* turn radio on first */
-			if (!priv->radio_on)
-				disassociate(usbdev, 1);
-
-			ret = rndis_set_oid(usbdev, OID_802_11_TX_POWER_LEVEL,
-						&tx_power, sizeof(tx_power));
-			if (ret != 0)
-				ret = -EOPNOTSUPP;
-			return ret;
-		} else {
-			/* txpower unsupported, just turn radio on */
-			if (!priv->radio_on)
-				return disassociate(usbdev, 1);
-			return 0; /* all ready on */
-		}
+		/* txpower unsupported, just turn radio on */
+		if (!priv->radio_on)
+			return disassociate(usbdev, 1);
+		return 0; /* all ready on */
 	}
 
 	/* tx_power == 0, turn off radio */
@@ -2125,7 +1969,7 @@ static int rndis_iw_set_mlme(struct net_device *dev,
     struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	struct iw_mlme *mlme = (struct iw_mlme *)extra;
 	unsigned char bssid[ETH_ALEN];
 
@@ -2150,7 +1994,7 @@ static int rndis_iw_set_mlme(struct net_device *dev,
 static struct iw_statistics *rndis_get_wireless_stats(struct net_device *dev)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->stats_lock, flags);
@@ -2165,20 +2009,18 @@ static struct iw_statistics *rndis_get_wireless_stats(struct net_device *dev)
 static const iw_handler rndis_iw_handler[] =
 {
 	IW_IOCTL(SIOCSIWCOMMIT)    = rndis_iw_commit,
-	IW_IOCTL(SIOCGIWNAME)      = rndis_iw_get_name,
+	IW_IOCTL(SIOCGIWNAME)      = (iw_handler) cfg80211_wext_giwname,
 	IW_IOCTL(SIOCSIWFREQ)      = rndis_iw_set_freq,
 	IW_IOCTL(SIOCGIWFREQ)      = rndis_iw_get_freq,
-	IW_IOCTL(SIOCSIWMODE)      = rndis_iw_set_mode,
-	IW_IOCTL(SIOCGIWMODE)      = rndis_iw_get_mode,
-	IW_IOCTL(SIOCGIWRANGE)     = rndis_iw_get_range,
+	IW_IOCTL(SIOCSIWMODE)      = (iw_handler) cfg80211_wext_siwmode,
+	IW_IOCTL(SIOCGIWMODE)      = (iw_handler) cfg80211_wext_giwmode,
+	IW_IOCTL(SIOCGIWRANGE)     = (iw_handler) cfg80211_wext_giwrange,
 	IW_IOCTL(SIOCSIWAP)        = rndis_iw_set_bssid,
 	IW_IOCTL(SIOCGIWAP)        = rndis_iw_get_bssid,
-	IW_IOCTL(SIOCSIWSCAN)      = rndis_iw_set_scan,
-	IW_IOCTL(SIOCGIWSCAN)      = rndis_iw_get_scan,
+	IW_IOCTL(SIOCSIWSCAN)      = (iw_handler) cfg80211_wext_siwscan,
+	IW_IOCTL(SIOCGIWSCAN)      = (iw_handler) cfg80211_wext_giwscan,
 	IW_IOCTL(SIOCSIWESSID)     = rndis_iw_set_essid,
 	IW_IOCTL(SIOCGIWESSID)     = rndis_iw_get_essid,
-	IW_IOCTL(SIOCSIWNICKN)     = rndis_iw_set_nick,
-	IW_IOCTL(SIOCGIWNICKN)     = rndis_iw_get_nick,
 	IW_IOCTL(SIOCGIWRATE)      = rndis_iw_get_rate,
 	IW_IOCTL(SIOCSIWRTS)       = rndis_iw_set_rts,
 	IW_IOCTL(SIOCGIWRTS)       = rndis_iw_get_rts,
@@ -2195,28 +2037,28 @@ static const iw_handler rndis_iw_handler[] =
 	IW_IOCTL(SIOCSIWMLME)      = rndis_iw_set_mlme,
 };
 
-static const iw_handler rndis_wext_private_handler[] = {
+static const iw_handler rndis_wlan_private_handler[] = {
 };
 
-static const struct iw_priv_args rndis_wext_private_args[] = {
+static const struct iw_priv_args rndis_wlan_private_args[] = {
 };
 
 
 static const struct iw_handler_def rndis_iw_handlers = {
 	.num_standard = ARRAY_SIZE(rndis_iw_handler),
-	.num_private  = ARRAY_SIZE(rndis_wext_private_handler),
-	.num_private_args = ARRAY_SIZE(rndis_wext_private_args),
+	.num_private  = ARRAY_SIZE(rndis_wlan_private_handler),
+	.num_private_args = ARRAY_SIZE(rndis_wlan_private_args),
 	.standard = (iw_handler *)rndis_iw_handler,
-	.private  = (iw_handler *)rndis_wext_private_handler,
-	.private_args = (struct iw_priv_args *)rndis_wext_private_args,
+	.private  = (iw_handler *)rndis_wlan_private_handler,
+	.private_args = (struct iw_priv_args *)rndis_wlan_private_args,
 	.get_wireless_stats = rndis_get_wireless_stats,
 };
 
 
-static void rndis_wext_worker(struct work_struct *work)
+static void rndis_wlan_worker(struct work_struct *work)
 {
-	struct rndis_wext_private *priv =
-		container_of(work, struct rndis_wext_private, work);
+	struct rndis_wlan_private *priv =
+		container_of(work, struct rndis_wlan_private, work);
 	struct usbnet *usbdev = priv->usbdev;
 	union iwreq_data evt;
 	unsigned char bssid[ETH_ALEN];
@@ -2277,10 +2119,10 @@ get_bssid:
 		set_multicast_list(usbdev);
 }
 
-static void rndis_wext_set_multicast_list(struct net_device *dev)
+static void rndis_wlan_set_multicast_list(struct net_device *dev)
 {
 	struct usbnet *usbdev = netdev_priv(dev);
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	if (test_bit(WORK_SET_MULTICAST_LIST, &priv->work_pending))
 		return;
@@ -2289,9 +2131,9 @@ static void rndis_wext_set_multicast_list(struct net_device *dev)
 	queue_work(priv->workqueue, &priv->work);
 }
 
-static void rndis_wext_link_change(struct usbnet *usbdev, int state)
+static void rndis_wlan_link_change(struct usbnet *usbdev, int state)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	/* queue work to avoid recursive calls into rndis_command */
 	set_bit(state ? WORK_LINK_UP : WORK_LINK_DOWN, &priv->work_pending);
@@ -2299,22 +2141,14 @@ static void rndis_wext_link_change(struct usbnet *usbdev, int state)
 }
 
 
-static int rndis_wext_get_caps(struct usbnet *usbdev)
+static int rndis_wlan_get_caps(struct usbnet *usbdev)
 {
 	struct {
 		__le32	num_items;
 		__le32	items[8];
 	} networks_supported;
 	int len, retval, i, n;
-	__le32 tx_power;
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
-
-	/* determine if supports setting txpower */
-	len = sizeof(tx_power);
-	retval = rndis_query_oid(usbdev, OID_802_11_TX_POWER_LEVEL, &tx_power,
-									&len);
-	if (retval == 0 && le32_to_cpu(tx_power) != 0xFF)
-		priv->caps |= CAP_SUPPORT_TXPOWER;
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	/* determine supported modes */
 	len = sizeof(networks_supported);
@@ -2326,24 +2160,18 @@ static int rndis_wext_get_caps(struct usbnet *usbdev)
 			n = 8;
 		for (i = 0; i < n; i++) {
 			switch (le32_to_cpu(networks_supported.items[i])) {
-			case ndis_80211_type_freq_hop:
-			case ndis_80211_type_direct_seq:
+			case NDIS_80211_TYPE_FREQ_HOP:
+			case NDIS_80211_TYPE_DIRECT_SEQ:
 				priv->caps |= CAP_MODE_80211B;
 				break;
-			case ndis_80211_type_ofdm_a:
+			case NDIS_80211_TYPE_OFDM_A:
 				priv->caps |= CAP_MODE_80211A;
 				break;
-			case ndis_80211_type_ofdm_g:
+			case NDIS_80211_TYPE_OFDM_G:
 				priv->caps |= CAP_MODE_80211G;
 				break;
 			}
 		}
-		if (priv->caps & CAP_MODE_80211A)
-			strcat(priv->name, "a");
-		if (priv->caps & CAP_MODE_80211B)
-			strcat(priv->name, "b");
-		if (priv->caps & CAP_MODE_80211G)
-			strcat(priv->name, "g");
 	}
 
 	return retval;
@@ -2353,8 +2181,8 @@ static int rndis_wext_get_caps(struct usbnet *usbdev)
 #define STATS_UPDATE_JIFFIES (HZ)
 static void rndis_update_wireless_stats(struct work_struct *work)
 {
-	struct rndis_wext_private *priv =
-		container_of(work, struct rndis_wext_private, stats_work.work);
+	struct rndis_wlan_private *priv =
+		container_of(work, struct rndis_wlan_private, stats_work.work);
 	struct usbnet *usbdev = priv->usbdev;
 	struct iw_statistics iwstats;
 	__le32 rssi, tmp;
@@ -2387,7 +2215,7 @@ static void rndis_update_wireless_stats(struct work_struct *work)
 	if (ret == 0) {
 		memset(&iwstats.qual, 0, sizeof(iwstats.qual));
 		iwstats.qual.qual  = level_to_qual(le32_to_cpu(rssi));
-		iwstats.qual.level = le32_to_cpu(rssi);
+		iwstats.qual.level = level_to_qual(le32_to_cpu(rssi));
 		iwstats.qual.updated = IW_QUAL_QUAL_UPDATED
 				| IW_QUAL_LEVEL_UPDATED
 				| IW_QUAL_NOISE_INVALID;
@@ -2457,9 +2285,19 @@ end:
 }
 
 
-static int bcm4320_early_init(struct usbnet *usbdev)
+static int bcm4320a_early_init(struct usbnet *usbdev)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	/* bcm4320a doesn't handle configuration parameters well. Try
+	 * set any and you get partially zeroed mac and broken device.
+	 */
+
+	return 0;
+}
+
+
+static int bcm4320b_early_init(struct usbnet *usbdev)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	char buf[8];
 
 	/* Early initialization settings, setting these won't have effect
@@ -2525,33 +2363,41 @@ static int bcm4320_early_init(struct usbnet *usbdev)
 }
 
 /* same as rndis_netdev_ops but with local multicast handler */
-static const struct net_device_ops rndis_wext_netdev_ops = {
+static const struct net_device_ops rndis_wlan_netdev_ops = {
 	.ndo_open		= usbnet_open,
 	.ndo_stop		= usbnet_stop,
 	.ndo_start_xmit		= usbnet_start_xmit,
 	.ndo_tx_timeout		= usbnet_tx_timeout,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= rndis_wext_set_multicast_list,
+	.ndo_set_multicast_list	= rndis_wlan_set_multicast_list,
 };
 
 
-static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
+static int rndis_wlan_bind(struct usbnet *usbdev, struct usb_interface *intf)
 {
-	struct rndis_wext_private *priv;
+	struct wiphy *wiphy;
+	struct rndis_wlan_private *priv;
 	int retval, len;
 	__le32 tmp;
 
-	/* allocate rndis private data */
-	priv = kzalloc(sizeof(struct rndis_wext_private), GFP_KERNEL);
-	if (!priv)
+	/* allocate wiphy and rndis private data
+	 * NOTE: We only support a single virtual interface, so wiphy
+	 * and wireless_dev are somewhat synonymous for this device.
+	 */
+	wiphy = wiphy_new(&rndis_config_ops, sizeof(struct rndis_wlan_private));
+	if (!wiphy)
 		return -ENOMEM;
 
+	priv = wiphy_priv(wiphy);
+	usbdev->net->ieee80211_ptr = &priv->wdev;
+	priv->wdev.wiphy = wiphy;
+	priv->wdev.iftype = NL80211_IFTYPE_STATION;
+
 	/* These have to be initialized before calling generic_rndis_bind().
-	 * Otherwise we'll be in big trouble in rndis_wext_early_init().
+	 * Otherwise we'll be in big trouble in rndis_wlan_early_init().
 	 */
 	usbdev->driver_priv = priv;
-	strcpy(priv->name, "IEEE802.11");
 	usbdev->net->wireless_handlers = &rndis_iw_handlers;
 	priv->usbdev = usbdev;
 
@@ -2560,8 +2406,9 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
 
 	/* because rndis_command() sleeps we need to use workqueue */
 	priv->workqueue = create_singlethread_workqueue("rndis_wlan");
-	INIT_WORK(&priv->work, rndis_wext_worker);
+	INIT_WORK(&priv->work, rndis_wlan_worker);
 	INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
+	INIT_DELAYED_WORK(&priv->scan_work, rndis_get_scan_results);
 
 	/* try bind rndis_host */
 	retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS);
@@ -2573,9 +2420,9 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
 	 * picks up rssi to closest station instead of to access point).
 	 *
 	 * rndis_host wants to avoid all OID as much as possible
-	 * so do promisc/multicast handling in rndis_wext.
+	 * so do promisc/multicast handling in rndis_wlan.
 	 */
-	usbdev->net->netdev_ops = &rndis_wext_netdev_ops;
+	usbdev->net->netdev_ops = &rndis_wlan_netdev_ops;
 
 	tmp = RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST;
 	retval = rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &tmp,
@@ -2600,7 +2447,32 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
 					| IW_QUAL_QUAL_INVALID
 					| IW_QUAL_LEVEL_INVALID;
 
-	rndis_wext_get_caps(usbdev);
+	/* fill-out wiphy structure and register w/ cfg80211 */
+	memcpy(wiphy->perm_addr, usbdev->net->dev_addr, ETH_ALEN);
+	wiphy->privid = rndis_wiphy_privid;
+	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
+					| BIT(NL80211_IFTYPE_ADHOC);
+	wiphy->max_scan_ssids = 1;
+
+	/* TODO: fill-out band information based on priv->caps */
+	rndis_wlan_get_caps(usbdev);
+
+	memcpy(priv->channels, rndis_channels, sizeof(rndis_channels));
+	memcpy(priv->rates, rndis_rates, sizeof(rndis_rates));
+	priv->band.channels = priv->channels;
+	priv->band.n_channels = ARRAY_SIZE(rndis_channels);
+	priv->band.bitrates = priv->rates;
+	priv->band.n_bitrates = ARRAY_SIZE(rndis_rates);
+	wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
+	wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+
+	set_wiphy_dev(wiphy, &usbdev->udev->dev);
+
+	if (wiphy_register(wiphy)) {
+		retval = -ENODEV;
+		goto fail;
+	}
+
 	set_default_iw_params(usbdev);
 
 	/* turn radio on */
@@ -2615,36 +2487,40 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
 
 fail:
 	cancel_delayed_work_sync(&priv->stats_work);
+	cancel_delayed_work_sync(&priv->scan_work);
 	cancel_work_sync(&priv->work);
 	flush_workqueue(priv->workqueue);
 	destroy_workqueue(priv->workqueue);
 
-	kfree(priv);
+	wiphy_free(wiphy);
 	return retval;
 }
 
 
-static void rndis_wext_unbind(struct usbnet *usbdev, struct usb_interface *intf)
+static void rndis_wlan_unbind(struct usbnet *usbdev, struct usb_interface *intf)
 {
-	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
 	/* turn radio off */
 	disassociate(usbdev, 0);
 
 	cancel_delayed_work_sync(&priv->stats_work);
+	cancel_delayed_work_sync(&priv->scan_work);
 	cancel_work_sync(&priv->work);
 	flush_workqueue(priv->workqueue);
 	destroy_workqueue(priv->workqueue);
 
 	if (priv && priv->wpa_ie_len)
 		kfree(priv->wpa_ie);
-	kfree(priv);
 
 	rndis_unbind(usbdev, intf);
+
+	wiphy_unregister(priv->wdev.wiphy);
+	wiphy_free(priv->wdev.wiphy);
 }
 
 
-static int rndis_wext_reset(struct usbnet *usbdev)
+static int rndis_wlan_reset(struct usbnet *usbdev)
 {
 	return deauthenticate(usbdev);
 }
@@ -2653,40 +2529,40 @@ static int rndis_wext_reset(struct usbnet *usbdev)
 static const struct driver_info	bcm4320b_info = {
 	.description =	"Wireless RNDIS device, BCM4320b based",
 	.flags =	FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_wext_bind,
-	.unbind =	rndis_wext_unbind,
+	.bind =		rndis_wlan_bind,
+	.unbind =	rndis_wlan_unbind,
 	.status =	rndis_status,
 	.rx_fixup =	rndis_rx_fixup,
 	.tx_fixup =	rndis_tx_fixup,
-	.reset =	rndis_wext_reset,
-	.early_init =	bcm4320_early_init,
-	.link_change =	rndis_wext_link_change,
+	.reset =	rndis_wlan_reset,
+	.early_init =	bcm4320b_early_init,
+	.link_change =	rndis_wlan_link_change,
 };
 
 static const struct driver_info	bcm4320a_info = {
 	.description =	"Wireless RNDIS device, BCM4320a based",
 	.flags =	FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_wext_bind,
-	.unbind =	rndis_wext_unbind,
+	.bind =		rndis_wlan_bind,
+	.unbind =	rndis_wlan_unbind,
 	.status =	rndis_status,
 	.rx_fixup =	rndis_rx_fixup,
 	.tx_fixup =	rndis_tx_fixup,
-	.reset =	rndis_wext_reset,
-	.early_init =	bcm4320_early_init,
-	.link_change =	rndis_wext_link_change,
+	.reset =	rndis_wlan_reset,
+	.early_init =	bcm4320a_early_init,
+	.link_change =	rndis_wlan_link_change,
 };
 
-static const struct driver_info rndis_wext_info = {
+static const struct driver_info rndis_wlan_info = {
 	.description =	"Wireless RNDIS device",
 	.flags =	FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_wext_bind,
-	.unbind =	rndis_wext_unbind,
+	.bind =		rndis_wlan_bind,
+	.unbind =	rndis_wlan_unbind,
 	.status =	rndis_status,
 	.rx_fixup =	rndis_rx_fixup,
 	.tx_fixup =	rndis_tx_fixup,
-	.reset =	rndis_wext_reset,
-	.early_init =	bcm4320_early_init,
-	.link_change =	rndis_wext_link_change,
+	.reset =	rndis_wlan_reset,
+	.early_init =	bcm4320a_early_init,
+	.link_change =	rndis_wlan_link_change,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -2796,11 +2672,11 @@ static const struct usb_device_id products [] = {
 {
 	/* RNDIS is MSFT's un-official variant of CDC ACM */
 	USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
-	.driver_info = (unsigned long) &rndis_wext_info,
+	.driver_info = (unsigned long) &rndis_wlan_info,
 }, {
 	/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
 	USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
-	.driver_info = (unsigned long) &rndis_wext_info,
+	.driver_info = (unsigned long) &rndis_wlan_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bfc5d9cf716..8aab3e6754b 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -9,11 +9,11 @@ menuconfig RT2X00
 
 	  When building one of the individual drivers, the rt2x00 library
 	  will also be created. That library (when the driver is built as
-	  a module) will be called "rt2x00lib.ko".
+	  a module) will be called rt2x00lib.
 
 	  Additionally PCI and USB libraries will also be build depending
 	  on the types of drivers being selected, these libraries will be
-	  called "rt2x00pci.ko" and "rt2x00usb.ko".
+	  called rt2x00pci and rt2x00usb.
 
 if RT2X00
 
@@ -26,7 +26,7 @@ config RT2400PCI
 	  This adds support for rt2400 wireless chipset family.
 	  Supported chips: RT2460.
 
-	  When compiled as a module, this driver will be called "rt2400pci.ko".
+	  When compiled as a module, this driver will be called rt2400pci.
 
 config RT2500PCI
 	tristate "Ralink rt2500 (PCI/PCMCIA) support"
@@ -37,7 +37,7 @@ config RT2500PCI
 	  This adds support for rt2500 wireless chipset family.
 	  Supported chips: RT2560.
 
-	  When compiled as a module, this driver will be called "rt2500pci.ko".
+	  When compiled as a module, this driver will be called rt2500pci.
 
 config RT61PCI
 	tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
@@ -51,7 +51,7 @@ config RT61PCI
 	  This adds support for rt2501 wireless chipset family.
 	  Supported chips: RT2561, RT2561S & RT2661.
 
-	  When compiled as a module, this driver will be called "rt61pci.ko".
+	  When compiled as a module, this driver will be called rt61pci.
 
 config RT2500USB
 	tristate "Ralink rt2500 (USB) support"
@@ -62,7 +62,7 @@ config RT2500USB
 	  This adds support for rt2500 wireless chipset family.
 	  Supported chips: RT2571 & RT2572.
 
-	  When compiled as a module, this driver will be called "rt2500usb.ko".
+	  When compiled as a module, this driver will be called rt2500usb.
 
 config RT73USB
 	tristate "Ralink rt2501/rt73 (USB) support"
@@ -75,7 +75,21 @@ config RT73USB
 	  This adds support for rt2501 wireless chipset family.
 	  Supported chips: RT2571W, RT2573 & RT2671.
 
-	  When compiled as a module, this driver will be called "rt73usb.ko".
+	  When compiled as a module, this driver will be called rt73usb.
+
+config RT2800USB
+	tristate "Ralink rt2800 (USB) support"
+	depends on USB
+	select RT2X00_LIB_USB
+	select RT2X00_LIB_HT
+	select RT2X00_LIB_FIRMWARE
+	select RT2X00_LIB_CRYPTO
+	select CRC_CCITT
+	---help---
+	  This adds support for rt2800 wireless chipset family.
+	  Supported chips: RT2770, RT2870 & RT3070.
+
+	  When compiled as a module, this driver will be called "rt2800usb.ko".
 
 config RT2X00_LIB_PCI
 	tristate
@@ -88,6 +102,9 @@ config RT2X00_LIB_USB
 config RT2X00_LIB
 	tristate
 
+config RT2X00_LIB_HT
+	boolean
+
 config RT2X00_LIB_FIRMWARE
 	boolean
 	select FW_LOADER
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index f22d808d8c5..bfc7226f0af 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -8,6 +8,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO)	+= rt2x00crypto.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL)	+= rt2x00rfkill.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE)	+= rt2x00firmware.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS)	+= rt2x00leds.o
+rt2x00lib-$(CONFIG_RT2X00_LIB_HT)	+= rt2x00ht.o
 
 obj-$(CONFIG_RT2X00_LIB)		+= rt2x00lib.o
 obj-$(CONFIG_RT2X00_LIB_PCI)		+= rt2x00pci.o
@@ -17,3 +18,4 @@ obj-$(CONFIG_RT2500PCI)			+= rt2500pci.o
 obj-$(CONFIG_RT61PCI)			+= rt61pci.o
 obj-$(CONFIG_RT2500USB)			+= rt2500usb.o
 obj-$(CONFIG_RT73USB)			+= rt73usb.o
+obj-$(CONFIG_RT2800USB)			+= rt2800usb.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 0f08773328c..435f945fe64 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -335,10 +335,11 @@ static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	preamble_mask = erp->short_preamble << 3;
 
 	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT,
-			   erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, erp->ack_timeout);
 	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
 			   erp->ack_consume_time);
+	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
+	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 
 	rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
@@ -371,6 +372,11 @@ static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&reg, CSR11_SLOT_TIME, erp->slot_time);
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 
+	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
+	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, erp->beacon_int * 16);
+	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, erp->beacon_int * 16);
+	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
+
 	rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 	rt2x00_set_field32(&reg, CSR18_SIFS, erp->sifs);
 	rt2x00_set_field32(&reg, CSR18_PIFS, erp->pifs);
@@ -503,24 +509,6 @@ static void rt2400pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 }
 
-static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
-	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
-
-	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
-	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
-			   libconf->conf->beacon_int * 16);
-	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
-			   libconf->conf->beacon_int * 16);
-	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
-}
-
 static void rt2400pci_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -532,7 +520,7 @@ static void rt2400pci_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2x00pci_register_read(rt2x00dev, CSR20, &reg);
 		rt2x00_set_field32(&reg, CSR20_DELAY_AFTER_TBCN,
-				   (libconf->conf->beacon_int - 20) * 16);
+				   (rt2x00dev->beacon_int - 20) * 16);
 		rt2x00_set_field32(&reg, CSR20_TBCN_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 
@@ -558,8 +546,6 @@ static void rt2400pci_config(struct rt2x00_dev *rt2x00dev,
 					 libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt2400pci_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt2400pci_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt2400pci_config_ps(rt2x00dev, libconf);
 }
@@ -1361,7 +1347,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
+	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
@@ -1580,7 +1566,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 276a8232aaa..08b30d01e67 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -341,10 +341,11 @@ static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	preamble_mask = erp->short_preamble << 3;
 
 	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT,
-			   erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, erp->ack_timeout);
 	rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
 			   erp->ack_consume_time);
+	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
+	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 
 	rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
@@ -377,6 +378,11 @@ static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&reg, CSR11_SLOT_TIME, erp->slot_time);
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 
+	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
+	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, erp->beacon_int * 16);
+	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, erp->beacon_int * 16);
+	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
+
 	rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 	rt2x00_set_field32(&reg, CSR18_SIFS, erp->sifs);
 	rt2x00_set_field32(&reg, CSR18_PIFS, erp->pifs);
@@ -552,24 +558,6 @@ static void rt2500pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 }
 
-static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
-	rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
-	rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
-
-	rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
-	rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
-			   libconf->conf->beacon_int * 16);
-	rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
-			   libconf->conf->beacon_int * 16);
-	rt2x00pci_register_write(rt2x00dev, CSR12, reg);
-}
-
 static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -581,7 +569,7 @@ static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2x00pci_register_read(rt2x00dev, CSR20, &reg);
 		rt2x00_set_field32(&reg, CSR20_DELAY_AFTER_TBCN,
-				   (libconf->conf->beacon_int - 20) * 16);
+				   (rt2x00dev->beacon_int - 20) * 16);
 		rt2x00_set_field32(&reg, CSR20_TBCN_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 
@@ -609,8 +597,6 @@ static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
 					 libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt2500pci_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt2500pci_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt2500pci_config_ps(rt2x00dev, libconf);
 }
@@ -1525,7 +1511,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 */
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
+	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
@@ -1879,7 +1865,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.get_stats		= rt2x00mac_get_stats,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 9e630e70fc9..66daf68ff0e 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -503,6 +503,10 @@ static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
 
 	rt2500usb_register_write(rt2x00dev, TXRX_CSR11, erp->basic_rates);
 
+	rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
+	rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL, erp->beacon_int * 4);
+	rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
+
 	rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time);
 	rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs);
 	rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs);
@@ -632,17 +636,6 @@ static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 	rt2500usb_rf_write(rt2x00dev, 3, rf3);
 }
 
-static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u16 reg;
-
-	rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
-	rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL,
-			   libconf->conf->beacon_int * 4);
-	rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
-}
-
 static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -654,7 +647,7 @@ static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
 		rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON,
-				   libconf->conf->beacon_int - 20);
+				   rt2x00dev->beacon_int - 20);
 		rt2x00_set_field16(&reg, MAC_CSR18_BEACONS_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 
@@ -680,8 +673,6 @@ static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
 	    !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
 		rt2500usb_config_txpower(rt2x00dev,
 					 libconf->conf->power_level);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt2500usb_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt2500usb_config_ps(rt2x00dev, libconf);
 }
@@ -1559,7 +1550,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) {
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
@@ -1908,7 +1899,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.set_key		= rt2x00mac_set_key,
 	.get_stats		= rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
new file mode 100644
index 00000000000..37561667925
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -0,0 +1,3078 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800usb
+	Abstract: rt2800usb device specific routines.
+	Supported chipsets: RT2800U.
+ */
+
+#include <linux/crc-ccitt.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "rt2x00.h"
+#include "rt2x00usb.h"
+#include "rt2800usb.h"
+
+/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 1;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2x00usb_register_read and rt2x00usb_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ * The _lock versions must be used if you already hold the csr_mutex
+ */
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+	rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+			       H2M_MAILBOX_CSR_OWNER, (__reg))
+
+static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev,
+				const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
+
+		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
+
+		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+				  const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+				 const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+		WAIT_FOR_RFCSR(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, const u32 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
+
+		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
+		rt2x00_rf_write(rt2x00dev, word, value);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
+				  const u8 command, const u8 token,
+				  const u8 arg0, const u8 arg1)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the MCU becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
+		rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
+
+		reg = 0;
+		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
+		rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+static const struct rt2x00debug rt2800usb_rt2x00debug = {
+	.owner	= THIS_MODULE,
+	.csr	= {
+		.read		= rt2x00usb_register_read,
+		.write		= rt2x00usb_register_write,
+		.flags		= RT2X00DEBUGFS_OFFSET,
+		.word_base	= CSR_REG_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= CSR_REG_SIZE / sizeof(u32),
+	},
+	.eeprom	= {
+		.read		= rt2x00_eeprom_read,
+		.write		= rt2x00_eeprom_write,
+		.word_base	= EEPROM_BASE,
+		.word_size	= sizeof(u16),
+		.word_count	= EEPROM_SIZE / sizeof(u16),
+	},
+	.bbp	= {
+		.read		= rt2800usb_bbp_read,
+		.write		= rt2800usb_bbp_write,
+		.word_base	= BBP_BASE,
+		.word_size	= sizeof(u8),
+		.word_count	= BBP_SIZE / sizeof(u8),
+	},
+	.rf	= {
+		.read		= rt2x00_rf_read,
+		.write		= rt2800usb_rf_write,
+		.word_base	= RF_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= RF_SIZE / sizeof(u32),
+	},
+};
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+}
+#else
+#define rt2800usb_rfkill_poll	NULL
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
+				     enum led_brightness brightness)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	unsigned int enabled = brightness != LED_OFF;
+	unsigned int bg_mode =
+	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+	unsigned int polarity =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_POLARITY);
+	unsigned int ledmode =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_MODE);
+
+	if (led->type == LED_TYPE_RADIO) {
+		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? 0x20 : 0);
+	} else if (led->type == LED_TYPE_ASSOC) {
+		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+	} else if (led->type == LED_TYPE_QUALITY) {
+		/*
+		 * The brightness is divided into 6 levels (0 - 5),
+		 * The specs tell us the following levels:
+		 *	0, 1 ,3, 7, 15, 31
+		 * to determine the level in a simple way we can simply
+		 * work with bitshifting:
+		 *	(1 << level) - 1
+		 */
+		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+				      (1 << brightness / (LED_FULL / 6)) - 1,
+				      polarity);
+	}
+}
+
+static int rt2800usb_blink_set(struct led_classdev *led_cdev,
+			       unsigned long *delay_on,
+			       unsigned long *delay_off)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	u32 reg;
+
+	rt2x00usb_register_read(led->rt2x00dev, LED_CFG, &reg);
+	rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
+	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
+	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
+	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
+	rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg);
+
+	return 0;
+}
+
+static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev,
+			       struct rt2x00_led *led,
+			       enum led_type type)
+{
+	led->rt2x00dev = rt2x00dev;
+	led->type = type;
+	led->led_dev.brightness_set = rt2800usb_brightness_set;
+	led->led_dev.blink_set = rt2800usb_blink_set;
+	led->flags = LED_INITIALIZED;
+}
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
+				       struct rt2x00lib_crypto *crypto,
+				       struct ieee80211_key_conf *key)
+{
+	struct mac_wcid_entry wcid_entry;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+	u32 reg;
+
+	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
+
+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+			   (crypto->cmd == SET_KEY) * crypto->bssidx);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+	rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+	memset(&iveiv_entry, 0, sizeof(iveiv_entry));
+	if ((crypto->cipher == CIPHER_TKIP) ||
+	    (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
+	    (crypto->cipher == CIPHER_AES))
+		iveiv_entry.iv[3] |= 0x20;
+	iveiv_entry.iv[3] |= key->keyidx << 6;
+	rt2x00usb_register_multiwrite(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	offset = MAC_WCID_ENTRY(key->hw_key_idx);
+
+	memset(&wcid_entry, 0, sizeof(wcid_entry));
+	if (crypto->cmd == SET_KEY)
+		memcpy(&wcid_entry, crypto->address, ETH_ALEN);
+	rt2x00usb_register_multiwrite(rt2x00dev, offset,
+				      &wcid_entry, sizeof(wcid_entry));
+}
+
+static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
+				       struct rt2x00lib_crypto *crypto,
+				       struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	struct rt2x00_field32 field;
+	int timeout;
+	u32 offset;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = SHARED_KEY_ENTRY(key->hw_key_idx);
+		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+						    USB_VENDOR_REQUEST_OUT,
+						    offset, &key_entry,
+						    sizeof(key_entry),
+						    timeout);
+	}
+
+	/*
+	 * The cipher types are stored over multiple registers
+	 * starting with SHARED_KEY_MODE_BASE each word will have
+	 * 32 bits and contains the cipher types for 2 bssidx each.
+	 * Using the correct defines correctly will cause overhead,
+	 * so just calculate the correct offset.
+	 */
+	field.bit_offset = 4 * (key->hw_key_idx % 8);
+	field.bit_mask = 0x7 << field.bit_offset;
+
+	offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+
+static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+					 struct rt2x00lib_crypto *crypto,
+					 struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	int timeout;
+	u32 offset;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * 1 pairwise key is possible per AID, this means that the AID
+		 * equals our hw_key_idx. Make sure the WCID starts _after_ the
+		 * last possible shared key entry.
+		 */
+		if (crypto->aid > (256 - 32))
+			return -ENOSPC;
+
+		key->hw_key_idx = 32 + crypto->aid;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+						    USB_VENDOR_REQUEST_OUT,
+						    offset, &key_entry,
+						    sizeof(key_entry),
+						    timeout);
+	}
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+
+static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev,
+				    const unsigned int filter_flags)
+{
+	u32 reg;
+
+	/*
+	 * Start configuration steps.
+	 * Note that the version error will always be dropped
+	 * and broadcast frames will always be accepted since
+	 * there is no filter for it at this time.
+	 */
+	rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
+			   !(filter_flags & FIF_FCSFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+			   !(filter_flags & FIF_PLCPFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+			   !(filter_flags & FIF_PROMISC_IN_BSS));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+			   !(filter_flags & FIF_ALLMULTI));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg);
+}
+
+static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
+				  struct rt2x00_intf *intf,
+				  struct rt2x00intf_conf *conf,
+				  const unsigned int flags)
+{
+	unsigned int beacon_base;
+	u32 reg;
+
+	if (flags & CONFIG_UPDATE_TYPE) {
+		/*
+		 * Clear current synchronisation setup.
+		 * For the Beacon base registers we only need to clear
+		 * the first byte since that byte contains the VALID and OWNER
+		 * bits which (when set to 0) will invalidate the entire beacon.
+		 */
+		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+		rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
+
+		/*
+		 * Enable synchronisation.
+		 */
+		rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+		rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	}
+
+	if (flags & CONFIG_UPDATE_MAC) {
+		reg = le32_to_cpu(conf->mac[1]);
+		rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
+		conf->mac[1] = cpu_to_le32(reg);
+
+		rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
+					      conf->mac, sizeof(conf->mac));
+	}
+
+	if (flags & CONFIG_UPDATE_BSSID) {
+		reg = le32_to_cpu(conf->bssid[1]);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+		conf->bssid[1] = cpu_to_le32(reg);
+
+		rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
+					      conf->bssid, sizeof(conf->bssid));
+	}
+}
+
+static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
+				 struct rt2x00lib_erp *erp)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
+			   DIV_ROUND_UP(erp->ack_timeout, erp->slot_time));
+	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
+			   !!erp->short_preamble);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
+			   !!erp->short_preamble);
+	rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
+			   erp->cts_protection ? 2 : 0);
+	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE,
+				 erp->basic_rates);
+	rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
+	rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
+	rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+
+static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
+				 struct antenna_setup *ant)
+{
+	u8 r1;
+	u8 r3;
+
+	rt2800usb_bbp_read(rt2x00dev, 1, &r1);
+	rt2800usb_bbp_read(rt2x00dev, 3, &r3);
+
+	/*
+	 * Configure the TX antenna.
+	 */
+	switch ((int)ant->tx) {
+	case 1:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
+		break;
+	case 3:
+		/* Do nothing */
+		break;
+	}
+
+	/*
+	 * Configure the RX antenna.
+	 */
+	switch ((int)ant->rx) {
+	case 1:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+		break;
+	case 3:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
+		break;
+	}
+
+	rt2800usb_bbp_write(rt2x00dev, 3, r3);
+	rt2800usb_bbp_write(rt2x00dev, 1, r1);
+}
+
+static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+				      struct rt2x00lib_conf *libconf)
+{
+	u16 eeprom;
+	short lna_gain;
+
+	if (libconf->rf.channel <= 14) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
+	} else if (libconf->rf.channel <= 64) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+	} else if (libconf->rf.channel <= 128) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
+	} else {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
+	}
+
+	rt2x00dev->lna_gain = lna_gain;
+}
+
+static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+					  struct ieee80211_conf *conf,
+					  struct rf_channel *rf,
+					  struct channel_info *info)
+{
+	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+	if (rt2x00dev->default_ant.tx == 1)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+
+	if (rt2x00dev->default_ant.rx == 1) {
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+	} else if (rt2x00dev->default_ant.rx == 2)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+	if (rf->channel > 14) {
+		/*
+		 * When TX power is below 0, we should increase it by 7 to
+		 * make it a positive value (Minumum value is -7).
+		 * However this means that values between 0 and 7 have
+		 * double meaning, and we should set a 7DBm boost flag.
+		 */
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power1 >= 0));
+
+		if (info->tx_power1 < 0)
+			info->tx_power1 += 7;
+
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power1));
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power2 >= 0));
+
+		if (info->tx_power2 < 0)
+			info->tx_power2 += 7;
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power2));
+	} else {
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power1));
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power2));
+	}
+
+	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
+
+	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
+	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+					  struct ieee80211_conf *conf,
+					  struct rf_channel *rf,
+					  struct channel_info *info)
+{
+	u8 rfcsr;
+
+	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
+	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+	rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+			  TXPOWER_G_TO_DEV(info->tx_power1));
+	rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+	rt2800usb_rfcsr_write(rt2x00dev, 24,
+			      rt2x00dev->calibration[conf_is_ht40(conf)]);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
+				     struct ieee80211_conf *conf,
+				     struct rf_channel *rf,
+				     struct channel_info *info)
+{
+	u32 reg;
+	unsigned int tx_pin;
+	u8 bbp;
+
+	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+		rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info);
+	else
+		rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info);
+
+	/*
+	 * Change BBP settings
+	 */
+	rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+	rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+	rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+	rt2800usb_bbp_write(rt2x00dev, 86, 0);
+
+	if (rf->channel <= 14) {
+		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+			rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
+			rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
+		} else {
+			rt2800usb_bbp_write(rt2x00dev, 82, 0x84);
+			rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
+		}
+	} else {
+		rt2800usb_bbp_write(rt2x00dev, 82, 0xf2);
+
+		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+			rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
+		else
+			rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
+	}
+
+	rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
+	rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
+
+	tx_pin = 0;
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.tx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+	}
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.rx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+	}
+
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
+
+	rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800usb_bbp_read(rt2x00dev, 3, &bbp);
+	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2800usb_bbp_write(rt2x00dev, 3, bbp);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		if (conf_is_ht40(conf)) {
+			rt2800usb_bbp_write(rt2x00dev, 69, 0x1a);
+			rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+			rt2800usb_bbp_write(rt2x00dev, 73, 0x16);
+		} else {
+			rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+			rt2800usb_bbp_write(rt2x00dev, 70, 0x08);
+			rt2800usb_bbp_write(rt2x00dev, 73, 0x11);
+		}
+	}
+
+	msleep(1);
+}
+
+static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev,
+				     const int txpower)
+{
+	u32 reg;
+	u32 value = TXPOWER_G_TO_DEV(txpower);
+	u8 r1;
+
+	rt2800usb_bbp_read(rt2x00dev, 1, &r1);
+	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+	rt2800usb_bbp_write(rt2x00dev, 1, r1);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
+	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+}
+
+static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
+					 struct rt2x00lib_conf *libconf)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
+			   libconf->conf->short_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
+			   libconf->conf->long_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
+	rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg);
+}
+
+static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
+				struct rt2x00lib_conf *libconf)
+{
+	enum dev_state state =
+	    (libconf->conf->flags & IEEE80211_CONF_PS) ?
+		STATE_SLEEP : STATE_AWAKE;
+	u32 reg;
+
+	if (state == STATE_SLEEP) {
+		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
+		rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
+				   libconf->conf->listen_interval - 1);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
+		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+	} else {
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+
+		rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
+		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+	}
+}
+
+static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_conf *libconf,
+			     const unsigned int flags)
+{
+	/* Always recalculate LNA gain before changing configuration */
+	rt2800usb_config_lna_gain(rt2x00dev, libconf);
+
+	if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+		rt2800usb_config_channel(rt2x00dev, libconf->conf,
+					 &libconf->rf, &libconf->channel);
+	if (flags & IEEE80211_CONF_CHANGE_POWER)
+		rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level);
+	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
+		rt2800usb_config_retry_limit(rt2x00dev, libconf);
+	if (flags & IEEE80211_CONF_CHANGE_PS)
+		rt2800usb_config_ps(rt2x00dev, libconf);
+}
+
+/*
+ * Link tuning
+ */
+static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev,
+				 struct link_qual *qual)
+{
+	u32 reg;
+
+	/*
+	 * Update FCS error count from register.
+	 */
+	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
+}
+
+static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+{
+	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+		if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+			return 0x1c + (2 * rt2x00dev->lna_gain);
+		else
+			return 0x2e + rt2x00dev->lna_gain;
+	}
+
+	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+	else
+		return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
+}
+
+static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev,
+				     struct link_qual *qual, u8 vgc_level)
+{
+	if (qual->vgc_level != vgc_level) {
+		rt2800usb_bbp_write(rt2x00dev, 66, vgc_level);
+		qual->vgc_level = vgc_level;
+		qual->vgc_level_reg = vgc_level;
+	}
+}
+
+static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
+				  struct link_qual *qual)
+{
+	rt2800usb_set_vgc(rt2x00dev, qual,
+			  rt2800usb_get_default_vgc(rt2x00dev));
+}
+
+static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
+				 struct link_qual *qual, const u32 count)
+{
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+		return;
+
+	/*
+	 * When RSSI is better then -80 increase VGC level with 0x10
+	 */
+	rt2800usb_set_vgc(rt2x00dev, qual,
+			  rt2800usb_get_default_vgc(rt2x00dev) +
+			  ((qual->rssi > -80) * 0x10));
+}
+
+/*
+ * Firmware functions
+ */
+static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
+{
+	return FIRMWARE_RT2870;
+}
+
+static bool rt2800usb_check_crc(const u8 *data, const size_t len)
+{
+	u16 fw_crc;
+	u16 crc;
+
+	/*
+	 * The last 2 bytes in the firmware array are the crc checksum itself,
+	 * this means that we should never pass those 2 bytes to the crc
+	 * algorithm.
+	 */
+	fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+	/*
+	 * Use the crc ccitt algorithm.
+	 * This will return the same value as the legacy driver which
+	 * used bit ordering reversion on the both the firmware bytes
+	 * before input input as well as on the final output.
+	 * Obviously using crc ccitt directly is much more efficient.
+	 */
+	crc = crc_ccitt(~0, data, len - 2);
+
+	/*
+	 * There is a small difference between the crc-itu-t + bitrev and
+	 * the crc-ccitt crc calculation. In the latter method the 2 bytes
+	 * will be swapped, use swab16 to convert the crc to the correct
+	 * value.
+	 */
+	crc = swab16(crc);
+
+	return fw_crc == crc;
+}
+
+static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
+				    const u8 *data, const size_t len)
+{
+	u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+	size_t offset = 0;
+
+	/*
+	 * Firmware files:
+	 * There are 2 variations of the rt2870 firmware.
+	 * a) size: 4kb
+	 * b) size: 8kb
+	 * Note that (b) contains 2 seperate firmware blobs of 4k
+	 * within the file. The first blob is the same firmware as (a),
+	 * but the second blob is for the additional chipsets.
+	 */
+	if (len != 4096 && len != 8192)
+		return FW_BAD_LENGTH;
+
+	/*
+	 * Check if we need the upper 4kb firmware data or not.
+	 */
+	if ((len == 4096) &&
+	    (chipset != 0x2860) &&
+	    (chipset != 0x2872) &&
+	    (chipset != 0x3070))
+		return FW_BAD_VERSION;
+
+	/*
+	 * 8kb firmware files must be checked as if it were
+	 * 2 seperate firmware files.
+	 */
+	while (offset < len) {
+		if (!rt2800usb_check_crc(data + offset, 4096))
+			return FW_BAD_CRC;
+
+		offset += 4096;
+	}
+
+	return FW_OK;
+}
+
+static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
+				   const u8 *data, const size_t len)
+{
+	unsigned int i;
+	int status;
+	u32 reg;
+	u32 offset;
+	u32 length;
+	u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+
+	/*
+	 * Check which section of the firmware we need.
+	 */
+	if ((chipset == 0x2860) ||
+	    (chipset == 0x2872) ||
+	    (chipset == 0x3070)) {
+		offset = 0;
+		length = 4096;
+	} else {
+		offset = 4096;
+		length = 4096;
+	}
+
+	/*
+	 * Wait for stable hardware.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+		if (reg && reg != ~0)
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "Unstable hardware.\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Write firmware to device.
+	 */
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT,
+					    FIRMWARE_IMAGE_BASE,
+					    data + offset, length,
+					    REGISTER_TIMEOUT32(length));
+
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+
+	/*
+	 * Send firmware request to device to load firmware,
+	 * we need to specify a long timeout time.
+	 */
+	status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
+					     0, USB_MODE_FIRMWARE,
+					     REGISTER_TIMEOUT_FIRMWARE);
+	if (status < 0) {
+		ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
+		return status;
+	}
+
+	msleep(10);
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+
+	/*
+	 * Send signal to firmware during boot time.
+	 */
+	rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+
+	if ((chipset == 0x3070) ||
+	    (chipset == 0x3071) ||
+	    (chipset == 0x3572)) {
+		udelay(200);
+		rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
+		udelay(10);
+	}
+
+	/*
+	 * Wait for device to stabilize.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "PBF system register not ready.\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Initialize firmware.
+	 */
+	rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	msleep(1);
+
+	return 0;
+}
+
+/*
+ * Initialization functions.
+ */
+static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	unsigned int i;
+
+	/*
+	 * Wait untill BBP and RF are ready.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+		if (reg && reg != ~0)
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "Unstable hardware.\n");
+		return -EBUSY;
+	}
+
+	rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+	rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
+
+	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+
+	rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
+				    USB_MODE_RESET, REGISTER_TIMEOUT);
+
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
+	rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg);
+
+	rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
+	rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg);
+
+	rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
+	rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+	} else {
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
+		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+	}
+
+	rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
+	rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
+	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
+	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
+	else
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+	rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
+
+	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
+	rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+
+	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
+	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
+	rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
+
+	rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
+			   IEEE80211_MAX_RTS_THRESHOLD);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
+	rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
+	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	/*
+	 * ASIC will keep garbage value after boot, clear encryption keys.
+	 */
+	for (i = 0; i < 256; i++) {
+		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
+		rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
+					      wcid, sizeof(wcid));
+
+		rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
+		rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
+	}
+
+	for (i = 0; i < 16; i++)
+		rt2x00usb_register_write(rt2x00dev,
+					 SHARED_KEY_MODE_ENTRY(i), 0);
+
+	/*
+	 * Clear all beacons
+	 * For the Beacon base registers we only need to clear
+	 * the first byte since that byte contains the VALID and OWNER
+	 * bits which (when set to 0) will invalidate the entire beacon.
+	 */
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
+	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
+
+	rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, &reg);
+	rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
+	rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
+	rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg);
+
+	rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
+	rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg);
+
+	rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 3);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
+	rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg);
+
+	rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
+	rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg);
+
+	/*
+	 * We must clear the error counters.
+	 * These registers are cleared on read,
+	 * so we may pass a useless variable to store the value.
+	 */
+	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
+	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, &reg);
+	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, &reg);
+	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, &reg);
+	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, &reg);
+
+	return 0;
+}
+
+static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
+		if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
+			return 0;
+
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u8 value;
+
+	/*
+	 * BBP was enabled after firmware was loaded,
+	 * but we need to reactivate it now.
+	 */
+	rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	msleep(1);
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800usb_bbp_read(rt2x00dev, 0, &value);
+		if ((value != 0xff) && (value != 0x00))
+			return 0;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u16 eeprom;
+	u8 reg_id;
+	u8 value;
+
+	if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) ||
+		     rt2800usb_wait_bbp_ready(rt2x00dev)))
+		return -EACCES;
+
+	rt2800usb_bbp_write(rt2x00dev, 65, 0x2c);
+	rt2800usb_bbp_write(rt2x00dev, 66, 0x38);
+	rt2800usb_bbp_write(rt2x00dev, 69, 0x12);
+	rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+	rt2800usb_bbp_write(rt2x00dev, 73, 0x10);
+	rt2800usb_bbp_write(rt2x00dev, 81, 0x37);
+	rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
+	rt2800usb_bbp_write(rt2x00dev, 83, 0x6a);
+	rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
+	rt2800usb_bbp_write(rt2x00dev, 86, 0x00);
+	rt2800usb_bbp_write(rt2x00dev, 91, 0x04);
+	rt2800usb_bbp_write(rt2x00dev, 92, 0x00);
+	rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
+	rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+		rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
+	}
+
+	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) {
+		rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
+	}
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+		rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+		rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
+		rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+	}
+
+	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+		if (eeprom != 0xffff && eeprom != 0x0000) {
+			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+			rt2800usb_bbp_write(rt2x00dev, reg_id, value);
+		}
+	}
+
+	return 0;
+}
+
+static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
+				   bool bw40, u8 rfcsr24, u8 filter_target)
+{
+	unsigned int i;
+	u8 bbp;
+	u8 rfcsr;
+	u8 passband;
+	u8 stopband;
+	u8 overtuned = 0;
+
+	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+
+	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
+	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
+	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * Set power & frequency of passband test tone
+	 */
+	rt2800usb_bbp_write(rt2x00dev, 24, 0);
+
+	for (i = 0; i < 100; i++) {
+		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800usb_bbp_read(rt2x00dev, 55, &passband);
+		if (passband)
+			break;
+	}
+
+	/*
+	 * Set power & frequency of stopband test tone
+	 */
+	rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
+
+	for (i = 0; i < 100; i++) {
+		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
+
+		if ((passband - stopband) <= filter_target) {
+			rfcsr24++;
+			overtuned += ((passband - stopband) == filter_target);
+		} else
+			break;
+
+		rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	}
+
+	rfcsr24 -= !!overtuned;
+
+	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	return rfcsr24;
+}
+
+static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+{
+	u8 rfcsr;
+	u8 bbp;
+
+	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+		return 0;
+
+	/*
+	 * Init RF calibration.
+	 */
+	rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+	rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
+	rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
+	rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
+	rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
+	rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
+	rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
+	rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
+	rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
+	rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
+	rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
+	rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
+	rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
+	rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
+	rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
+	rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
+	rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
+	rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
+	rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
+	rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
+	rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
+
+	/*
+	 * Set RX Filter calibration for 20MHz and 40MHz
+	 */
+	rt2x00dev->calibration[0] =
+	    rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
+	rt2x00dev->calibration[1] =
+	    rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
+
+	/*
+	 * Set back to initial state
+	 */
+	rt2800usb_bbp_write(rt2x00dev, 24, 0);
+
+	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * set BBP back to BW20
+	 */
+	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+	return 0;
+}
+
+/*
+ * Device state switch handlers.
+ */
+static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
+				enum dev_state state)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
+			   (state == STATE_RADIO_RX_ON) ||
+			   (state == STATE_RADIO_RX_ON_LINK));
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+}
+
+static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
+			return 0;
+
+		msleep(1);
+	}
+
+	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 word;
+
+	/*
+	 * Initialize all registers.
+	 */
+	if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
+		     rt2800usb_init_registers(rt2x00dev) ||
+		     rt2800usb_init_bbp(rt2x00dev) ||
+		     rt2800usb_init_rfcsr(rt2x00dev)))
+		return -EIO;
+
+	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	udelay(50);
+
+	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
+	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+
+	rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
+	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
+	/* Don't use bulk in aggregation when working with USB 1.1 */
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
+			   (rt2x00dev->rx->usb_maxpacket == 512));
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
+	/*
+	 * Total room for RX frames in kilobytes, PBF might still exceed
+	 * this limit so reduce the number to prevent errors.
+	 */
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
+			   ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3);
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
+	rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
+	rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	/*
+	 * Initialize LED control
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
+	rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
+	rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
+	rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	return 0;
+}
+
+static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+	rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0);
+
+	/* Wait for DMA, ignore error */
+	rt2800usb_wait_wpdma_ready(rt2x00dev);
+
+	rt2x00usb_disable_radio(rt2x00dev);
+}
+
+static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
+			       enum dev_state state)
+{
+	if (state == STATE_AWAKE)
+		rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
+	else
+		rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+
+	return 0;
+}
+
+static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
+				      enum dev_state state)
+{
+	int retval = 0;
+
+	switch (state) {
+	case STATE_RADIO_ON:
+		/*
+		 * Before the radio can be enabled, the device first has
+		 * to be woken up. After that it needs a bit of time
+		 * to be fully awake and the radio can be enabled.
+		 */
+		rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
+		msleep(1);
+		retval = rt2800usb_enable_radio(rt2x00dev);
+		break;
+	case STATE_RADIO_OFF:
+		/*
+		 * After the radio has been disablee, the device should
+		 * be put to sleep for powersaving.
+		 */
+		rt2800usb_disable_radio(rt2x00dev);
+		rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
+		break;
+	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+	case STATE_RADIO_RX_OFF:
+	case STATE_RADIO_RX_OFF_LINK:
+		rt2800usb_toggle_rx(rt2x00dev, state);
+		break;
+	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_OFF:
+		/* No support, but no error either */
+		break;
+	case STATE_DEEP_SLEEP:
+	case STATE_SLEEP:
+	case STATE_STANDBY:
+	case STATE_AWAKE:
+		retval = rt2800usb_set_state(rt2x00dev, state);
+		break;
+	default:
+		retval = -ENOTSUPP;
+		break;
+	}
+
+	if (unlikely(retval))
+		ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
+		      state, retval);
+
+	return retval;
+}
+
+/*
+ * TX descriptor initialization
+ */
+static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+				    struct sk_buff *skb,
+				    struct txentry_desc *txdesc)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	__le32 *txi = skbdesc->desc;
+	__le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)];
+	u32 word;
+
+	/*
+	 * Initialize TX Info descriptor
+	 */
+	rt2x00_desc_read(txwi, 0, &word);
+	rt2x00_set_field32(&word, TXWI_W0_FRAG,
+			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+	rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
+	rt2x00_set_field32(&word, TXWI_W0_TS,
+			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
+			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
+	rt2x00_set_field32(&word, TXWI_W0_BW,
+			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
+			   test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
+	rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
+	rt2x00_desc_write(txwi, 0, word);
+
+	rt2x00_desc_read(txwi, 1, &word);
+	rt2x00_set_field32(&word, TXWI_W1_ACK,
+			   test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_NSEQ,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
+	rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
+			   test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
+			       txdesc->key_idx : 0xff);
+	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+			   skb->len - txdesc->l2pad);
+	rt2x00_set_field32(&word, TXWI_W1_PACKETID,
+			   skbdesc->entry->entry_idx);
+	rt2x00_desc_write(txwi, 1, word);
+
+	/*
+	 * Always write 0 to IV/EIV fields, hardware will insert the IV
+	 * from the IVEIV register when TXINFO_W0_WIV is set to 0.
+	 * When TXINFO_W0_WIV is set to 1 it will use the IV data
+	 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
+	 * crypto entry in the registers should be used to encrypt the frame.
+	 */
+	_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
+	_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+
+	/*
+	 * Initialize TX descriptor
+	 */
+	rt2x00_desc_read(txi, 0, &word);
+	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
+			   skb->len + TXWI_DESC_SIZE);
+	rt2x00_set_field32(&word, TXINFO_W0_WIV,
+			   !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
+	rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
+	rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
+	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
+	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
+			   test_bit(ENTRY_TXD_BURST, &txdesc->flags));
+	rt2x00_desc_write(txi, 0, word);
+}
+
+/*
+ * TX data initialization
+ */
+static void rt2800usb_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	unsigned int beacon_base;
+	u32 reg;
+
+	/*
+	 * Add the descriptor in front of the skb.
+	 */
+	skb_push(entry->skb, entry->queue->desc_size);
+	memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
+	skbdesc->desc = entry->skb->data;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	/*
+	 * Write entire beacon with descriptor to register.
+	 */
+	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT, beacon_base,
+					    entry->skb->data, entry->skb->len,
+					    REGISTER_TIMEOUT32(entry->skb->len));
+
+	/*
+	 * Clean up the beacon skb.
+	 */
+	dev_kfree_skb(entry->skb);
+	entry->skb = NULL;
+}
+
+static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
+{
+	int length;
+
+	/*
+	 * The length _must_ include 4 bytes padding,
+	 * it should always be multiple of 4,
+	 * but it must _not_ be a multiple of the USB packet size.
+	 */
+	length = roundup(entry->skb->len + 4, 4);
+	length += (4 * !(length % entry->queue->usb_maxpacket));
+
+	return length;
+}
+
+static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    const enum data_queue_qid queue)
+{
+	u32 reg;
+
+	if (queue != QID_BEACON) {
+		rt2x00usb_kick_tx_queue(rt2x00dev, queue);
+		return;
+	}
+
+	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+		rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	}
+}
+
+/*
+ * RX control handlers
+ */
+static void rt2800usb_fill_rxdone(struct queue_entry *entry,
+				  struct rxdone_entry_desc *rxdesc)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	__le32 *rxd = (__le32 *)entry->skb->data;
+	__le32 *rxwi;
+	u32 rxd0;
+	u32 rxwi0;
+	u32 rxwi1;
+	u32 rxwi2;
+	u32 rxwi3;
+
+	/*
+	 * Copy descriptor to the skbdesc->desc buffer, making it safe from
+	 * moving of frame data in rt2x00usb.
+	 */
+	memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
+	rxd = (__le32 *)skbdesc->desc;
+	rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)];
+
+	/*
+	 * It is now safe to read the descriptor on all architectures.
+	 */
+	rt2x00_desc_read(rxd, 0, &rxd0);
+	rt2x00_desc_read(rxwi, 0, &rxwi0);
+	rt2x00_desc_read(rxwi, 1, &rxwi1);
+	rt2x00_desc_read(rxwi, 2, &rxwi2);
+	rt2x00_desc_read(rxwi, 3, &rxwi3);
+
+	if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
+		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+		rxdesc->cipher_status =
+		    rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
+	}
+
+	if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
+		/*
+		 * Hardware has stripped IV/EIV data from 802.11 frame during
+		 * decryption. Unfortunately the descriptor doesn't contain
+		 * any fields with the EIV/IV data either, so they can't
+		 * be restored by rt2x00lib.
+		 */
+		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+			rxdesc->flags |= RX_FLAG_DECRYPTED;
+		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+	}
+
+	if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
+		rxdesc->dev_flags |= RXDONE_MY_BSS;
+
+	if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
+		rxdesc->dev_flags |= RXDONE_L2PAD;
+
+	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
+		rxdesc->flags |= RX_FLAG_SHORT_GI;
+
+	if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
+		rxdesc->flags |= RX_FLAG_40MHZ;
+
+	/*
+	 * Detect RX rate, always use MCS as signal type.
+	 */
+	rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
+	rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
+	rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
+
+	/*
+	 * Mask of 0x8 bit to remove the short preamble flag.
+	 */
+	if (rxdesc->rate_mode == RATE_MODE_CCK)
+		rxdesc->signal &= ~0x8;
+
+	rxdesc->rssi =
+	    (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
+	     rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
+
+	rxdesc->noise =
+	    (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
+	     rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
+
+	rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+
+	/*
+	 * Remove RXWI descriptor from start of buffer.
+	 */
+	skb_pull(entry->skb, skbdesc->desc_len);
+	skb_trim(entry->skb, rxdesc->size);
+}
+
+/*
+ * Device probe functions.
+ */
+static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u16 word;
+	u8 *mac;
+	u8 default_lna_gain;
+
+	rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
+
+	/*
+	 * Start validation of the data that has been read.
+	 */
+	mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
+	if (!is_valid_ether_addr(mac)) {
+		DECLARE_MAC_BUF(macbuf);
+
+		random_ether_addr(mac);
+		EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+	if (word == 0xffff) {
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
+	} else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
+		/*
+		 * There is a max of 2 RX streams for RT2870 series
+		 */
+		if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
+			rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
+	if (word == 0xffff) {
+		rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+		EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
+	if ((word & 0x00ff) == 0x00ff) {
+		rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
+		rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
+				   LED_MODE_TXRX_ACTIVITY);
+		rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
+		EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
+	}
+
+	/*
+	 * During the LNA validation we are going to use
+	 * lna0 as correct value. Note that EEPROM_LNA
+	 * is never validated.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
+	default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
+	if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
+	    rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
+				   default_lna_gain);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
+	if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
+	    rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
+				   default_lna_gain);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+
+	return 0;
+}
+
+static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 value;
+	u16 eeprom;
+
+	/*
+	 * Read EEPROM word for configuration.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Identify RF chipset.
+	 */
+	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+	rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
+
+	/*
+	 * The check for rt2860 is not a typo, some rt2870 hardware
+	 * identifies itself as rt2860 in the CSR register.
+	 */
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) &&
+	    !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) &&
+	    !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) &&
+	    !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) {
+		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
+		return -ENODEV;
+	}
+
+	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Identify default antenna configuration.
+	 */
+	rt2x00dev->default_ant.tx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
+	rt2x00dev->default_ant.rx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
+
+	/*
+	 * Read frequency offset and RF programming sequence.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+	rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
+
+	/*
+	 * Read external LNA informations.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
+
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
+		__set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
+		__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+
+	/*
+	 * Detect if this device has an hardware controlled radio.
+	 */
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
+		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+	/*
+	 * Store led settings, for correct led behaviour.
+	 */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
+			   &rt2x00dev->led_mcu_reg);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+	return 0;
+}
+
+/*
+ * RF value list for rt2870
+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
+ */
+static const struct rf_channel rf_vals[] = {
+	{ 1,  0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
+	{ 2,  0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
+	{ 3,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
+	{ 4,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
+	{ 5,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
+	{ 6,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
+	{ 7,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
+	{ 8,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
+	{ 9,  0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
+	{ 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
+	{ 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
+	{ 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
+	{ 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
+	{ 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
+
+	/* 802.11 UNI / HyperLan 2 */
+	{ 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
+	{ 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
+	{ 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
+	{ 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
+	{ 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
+	{ 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
+	{ 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
+	{ 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
+	{ 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
+	{ 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
+	{ 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
+	{ 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
+
+	/* 802.11 HyperLan 2 */
+	{ 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
+	{ 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
+	{ 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
+	{ 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
+	{ 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
+	{ 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
+	{ 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
+	{ 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
+	{ 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
+	{ 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
+	{ 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
+	{ 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
+	{ 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
+	{ 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
+	{ 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
+	{ 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
+
+	/* 802.11 UNII */
+	{ 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
+	{ 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
+	{ 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
+	{ 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
+	{ 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
+	{ 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
+	{ 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
+	{ 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
+	{ 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
+	{ 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
+	{ 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
+
+	/* 802.11 Japan */
+	{ 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
+	{ 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
+	{ 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
+	{ 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
+	{ 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
+	{ 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
+	{ 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+};
+
+/*
+ * RF value list for rt3070
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_3070[] = {
+	{1,  241, 2, 2 },
+	{2,  241, 2, 7 },
+	{3,  242, 2, 2 },
+	{4,  242, 2, 7 },
+	{5,  243, 2, 2 },
+	{6,  243, 2, 7 },
+	{7,  244, 2, 2 },
+	{8,  244, 2, 7 },
+	{9,  245, 2, 2 },
+	{10, 245, 2, 7 },
+	{11, 246, 2, 2 },
+	{12, 246, 2, 7 },
+	{13, 247, 2, 2 },
+	{14, 248, 2, 4 },
+};
+
+static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+	struct hw_mode_spec *spec = &rt2x00dev->spec;
+	struct channel_info *info;
+	char *tx_power1;
+	char *tx_power2;
+	unsigned int i;
+	u16 eeprom;
+
+	/*
+	 * Initialize all hw fields.
+	 */
+	rt2x00dev->hw->flags =
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM |
+	    IEEE80211_HW_SUPPORTS_PS |
+	    IEEE80211_HW_PS_NULLFUNC_STACK;
+	rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
+
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
+	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+				rt2x00_eeprom_addr(rt2x00dev,
+						   EEPROM_MAC_ADDR_0));
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Initialize HT information.
+	 */
+	spec->ht.ht_supported = true;
+	spec->ht.cap =
+	    IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+	    IEEE80211_HT_CAP_GRN_FLD |
+	    IEEE80211_HT_CAP_SGI_20 |
+	    IEEE80211_HT_CAP_SGI_40 |
+	    IEEE80211_HT_CAP_TX_STBC |
+	    IEEE80211_HT_CAP_RX_STBC |
+	    IEEE80211_HT_CAP_PSMP_SUPPORT;
+	spec->ht.ampdu_factor = 3;
+	spec->ht.ampdu_density = 4;
+	spec->ht.mcs.tx_params =
+	    IEEE80211_HT_MCS_TX_DEFINED |
+	    IEEE80211_HT_MCS_TX_RX_DIFF |
+	    ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
+		IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+
+	switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
+	case 3:
+		spec->ht.mcs.rx_mask[2] = 0xff;
+	case 2:
+		spec->ht.mcs.rx_mask[1] = 0xff;
+	case 1:
+		spec->ht.mcs.rx_mask[0] = 0xff;
+		spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
+		break;
+	}
+
+	/*
+	 * Initialize hw_mode information.
+	 */
+	spec->supported_bands = SUPPORT_BAND_2GHZ;
+	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
+
+	if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
+	    rt2x00_rf(&rt2x00dev->chip, RF2720)) {
+		spec->num_channels = 14;
+		spec->channels = rf_vals;
+	} else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
+		   rt2x00_rf(&rt2x00dev->chip, RF2750)) {
+		spec->supported_bands |= SUPPORT_BAND_5GHZ;
+		spec->num_channels = ARRAY_SIZE(rf_vals);
+		spec->channels = rf_vals;
+	} else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
+		   rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+		spec->num_channels = ARRAY_SIZE(rf_vals_3070);
+		spec->channels = rf_vals_3070;
+	}
+
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	spec->channels_info = info;
+
+	tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
+	tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
+
+	for (i = 0; i < 14; i++) {
+		info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
+		info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
+	}
+
+	if (spec->num_channels > 14) {
+		tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
+		tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
+
+		for (i = 14; i < spec->num_channels; i++) {
+			info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
+			info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
+		}
+	}
+
+	return 0;
+}
+
+static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+	int retval;
+
+	/*
+	 * Allocate eeprom data.
+	 */
+	retval = rt2800usb_validate_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	retval = rt2800usb_init_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * Initialize hw specifications.
+	 */
+	retval = rt2800usb_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * This device requires firmware.
+	 */
+	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
+	if (!modparam_nohwcrypt)
+		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+
+	/*
+	 * Set the rssi offset.
+	 */
+	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+	return 0;
+}
+
+/*
+ * IEEE80211 stack callback functions.
+ */
+static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
+				   u32 *iv32, u16 *iv16)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+
+	offset = MAC_IVEIV_ENTRY(hw_key_idx);
+	rt2x00usb_register_multiread(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
+	memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
+}
+
+static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u32 reg;
+	bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
+
+	rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
+	rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	return 0;
+}
+
+static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+			     const struct ieee80211_tx_queue_params *params)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct data_queue *queue;
+	struct rt2x00_field32 field;
+	int retval;
+	u32 reg;
+	u32 offset;
+
+	/*
+	 * First pass the configuration through rt2x00lib, that will
+	 * update the queue settings and validate the input. After that
+	 * we are free to update the registers based on the value
+	 * in the queue parameter.
+	 */
+	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+	if (retval)
+		return retval;
+
+	/*
+	 * We only need to perform additional register initialization
+	 * for WMM queues/
+	 */
+	if (queue_idx >= 4)
+		return 0;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+	/* Update WMM TXOP register */
+	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
+	field.bit_offset = (queue_idx & 1) * 16;
+	field.bit_mask = 0xffff << field.bit_offset;
+
+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field, queue->txop);
+	rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+	/* Update WMM registers */
+	field.bit_offset = queue_idx * 4;
+	field.bit_mask = 0xf << field.bit_offset;
+
+	rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->aifs);
+	rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_min);
+	rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
+
+	rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_max);
+	rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+
+	/* Update EDCA registers */
+	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
+
+	rt2x00usb_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
+	rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+	return 0;
+}
+
+static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u64 tsf;
+	u32 reg;
+
+	rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
+	tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
+	rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
+	tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
+
+	return tsf;
+}
+
+static const struct ieee80211_ops rt2800usb_mac80211_ops = {
+	.tx			= rt2x00mac_tx,
+	.start			= rt2x00mac_start,
+	.stop			= rt2x00mac_stop,
+	.add_interface		= rt2x00mac_add_interface,
+	.remove_interface	= rt2x00mac_remove_interface,
+	.config			= rt2x00mac_config,
+	.configure_filter	= rt2x00mac_configure_filter,
+	.set_key		= rt2x00mac_set_key,
+	.get_stats		= rt2x00mac_get_stats,
+	.get_tkip_seq		= rt2800usb_get_tkip_seq,
+	.set_rts_threshold	= rt2800usb_set_rts_threshold,
+	.bss_info_changed	= rt2x00mac_bss_info_changed,
+	.conf_tx		= rt2800usb_conf_tx,
+	.get_tx_stats		= rt2x00mac_get_tx_stats,
+	.get_tsf		= rt2800usb_get_tsf,
+};
+
+static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
+	.probe_hw		= rt2800usb_probe_hw,
+	.get_firmware_name	= rt2800usb_get_firmware_name,
+	.check_firmware		= rt2800usb_check_firmware,
+	.load_firmware		= rt2800usb_load_firmware,
+	.initialize		= rt2x00usb_initialize,
+	.uninitialize		= rt2x00usb_uninitialize,
+	.clear_entry		= rt2x00usb_clear_entry,
+	.set_device_state	= rt2800usb_set_device_state,
+	.rfkill_poll		= rt2800usb_rfkill_poll,
+	.link_stats		= rt2800usb_link_stats,
+	.reset_tuner		= rt2800usb_reset_tuner,
+	.link_tuner		= rt2800usb_link_tuner,
+	.write_tx_desc		= rt2800usb_write_tx_desc,
+	.write_tx_data		= rt2x00usb_write_tx_data,
+	.write_beacon		= rt2800usb_write_beacon,
+	.get_tx_data_len	= rt2800usb_get_tx_data_len,
+	.kick_tx_queue		= rt2800usb_kick_tx_queue,
+	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
+	.fill_rxdone		= rt2800usb_fill_rxdone,
+	.config_shared_key	= rt2800usb_config_shared_key,
+	.config_pairwise_key	= rt2800usb_config_pairwise_key,
+	.config_filter		= rt2800usb_config_filter,
+	.config_intf		= rt2800usb_config_intf,
+	.config_erp		= rt2800usb_config_erp,
+	.config_ant		= rt2800usb_config_ant,
+	.config			= rt2800usb_config,
+};
+
+static const struct data_queue_desc rt2800usb_queue_rx = {
+	.entry_num		= RX_ENTRIES,
+	.data_size		= AGGREGATION_SIZE,
+	.desc_size		= RXD_DESC_SIZE + RXWI_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_tx = {
+	.entry_num		= TX_ENTRIES,
+	.data_size		= AGGREGATION_SIZE,
+	.desc_size		= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_bcn = {
+	.entry_num		= 8 * BEACON_ENTRIES,
+	.data_size		= MGMT_FRAME_SIZE,
+	.desc_size		= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct rt2x00_ops rt2800usb_ops = {
+	.name		= KBUILD_MODNAME,
+	.max_sta_intf	= 1,
+	.max_ap_intf	= 8,
+	.eeprom_size	= EEPROM_SIZE,
+	.rf_size	= RF_SIZE,
+	.tx_queues	= NUM_TX_QUEUES,
+	.rx		= &rt2800usb_queue_rx,
+	.tx		= &rt2800usb_queue_tx,
+	.bcn		= &rt2800usb_queue_bcn,
+	.lib		= &rt2800usb_rt2x00_ops,
+	.hw		= &rt2800usb_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+	.debugfs	= &rt2800usb_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+/*
+ * rt2800usb module information.
+ */
+static struct usb_device_id rt2800usb_device_table[] = {
+	/* Abocom */
+	{ USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* AirTies */
+	{ USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Amigo */
+	{ USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Amit */
+	{ USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* ASUS */
+	{ USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* AzureWave */
+	{ USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Belkin */
+	{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Buffalo */
+	{ USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Conceptronic */
+	{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Corega */
+	{ USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* D-Link */
+	{ USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Edimax */
+	{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Encore */
+	{ USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* EnGenius */
+	{ USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Gemtek */
+	{ USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Gigabyte */
+	{ USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Hawking */
+	{ USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* I-O DATA */
+	{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* LevelOne */
+	{ USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Linksys */
+	{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Logitec */
+	{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Motorola */
+	{ USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Ovislink */
+	{ USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Pegatron */
+	{ USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Philips */
+	{ USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Planex */
+	{ USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Qcom */
+	{ USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Quanta */
+	{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Ralink */
+	{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Samsung */
+	{ USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Siemens */
+	{ USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sitecom */
+	{ USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* SMC */
+	{ USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sparklan */
+	{ USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Sweex */
+	{ USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* U-Media*/
+	{ USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* ZCOM */
+	{ USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Zinwell */
+	{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Zyxel */
+	{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ 0, }
+};
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
+MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
+MODULE_FIRMWARE(FIRMWARE_RT2870);
+MODULE_LICENSE("GPL");
+
+static struct usb_driver rt2800usb_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rt2800usb_device_table,
+	.probe		= rt2x00usb_probe,
+	.disconnect	= rt2x00usb_disconnect,
+	.suspend	= rt2x00usb_suspend,
+	.resume		= rt2x00usb_resume,
+};
+
+static int __init rt2800usb_init(void)
+{
+	return usb_register(&rt2800usb_driver);
+}
+
+static void __exit rt2800usb_exit(void)
+{
+	usb_deregister(&rt2800usb_driver);
+}
+
+module_init(rt2800usb_init);
+module_exit(rt2800usb_exit);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
new file mode 100644
index 00000000000..61a8be61d3f
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -0,0 +1,1945 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800usb
+	Abstract: Data structures and registers for the rt2800usb module.
+	Supported chipsets: RT2800U.
+ */
+
+#ifndef RT2800USB_H
+#define RT2800USB_H
+
+/*
+ * RF chip defines.
+ *
+ * RF2820 2.4G 2T3R
+ * RF2850 2.4G/5G 2T3R
+ * RF2720 2.4G 1T2R
+ * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G
+ */
+#define RF2820				0x0001
+#define RF2850				0x0002
+#define RF2720				0x0003
+#define RF2750				0x0004
+#define RF3020				0x0005
+#define RF2020				0x0006
+
+/*
+ * RT2870 version
+ */
+#define RT2860C_VERSION			0x28600100
+#define RT2860D_VERSION			0x28600101
+#define RT2880E_VERSION			0x28720200
+#define RT2883_VERSION			0x28830300
+#define RT3070_VERSION			0x30700200
+
+/*
+ * Signal information.
+ * Defaul offset is required for RSSI <-> dBm conversion.
+ */
+#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
+
+/*
+ * Register layout information.
+ */
+#define CSR_REG_BASE			0x1000
+#define CSR_REG_SIZE			0x0800
+#define EEPROM_BASE			0x0000
+#define EEPROM_SIZE			0x0110
+#define BBP_BASE			0x0000
+#define BBP_SIZE			0x0080
+#define RF_BASE				0x0004
+#define RF_SIZE				0x0010
+
+/*
+ * Number of TX queues.
+ */
+#define NUM_TX_QUEUES			4
+
+/*
+ * USB registers.
+ */
+
+/*
+ * HOST-MCU shared memory
+ */
+#define HOST_CMD_CSR			0x0404
+#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
+
+/*
+ * INT_SOURCE_CSR: Interrupt source register.
+ * Write one to clear corresponding bit.
+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
+ */
+#define INT_SOURCE_CSR			0x0200
+#define INT_SOURCE_CSR_RXDELAYINT	FIELD32(0x00000001)
+#define INT_SOURCE_CSR_TXDELAYINT	FIELD32(0x00000002)
+#define INT_SOURCE_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_SOURCE_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_SOURCE_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_SOURCE_CSR_TBTT		FIELD32(0x00000800)
+#define INT_SOURCE_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_SOURCE_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_SOURCE_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_SOURCE_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_SOURCE_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_SOURCE_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
+ */
+#define INT_MASK_CSR			0x0204
+#define INT_MASK_CSR_RXDELAYINT		FIELD32(0x00000001)
+#define INT_MASK_CSR_TXDELAYINT		FIELD32(0x00000002)
+#define INT_MASK_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_MASK_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_MASK_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_MASK_CSR_TBTT		FIELD32(0x00000800)
+#define INT_MASK_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_MASK_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_MASK_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_MASK_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_MASK_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_MASK_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * WPDMA_GLO_CFG
+ */
+#define WPDMA_GLO_CFG 			0x0208
+#define WPDMA_GLO_CFG_ENABLE_TX_DMA	FIELD32(0x00000001)
+#define WPDMA_GLO_CFG_TX_DMA_BUSY    	FIELD32(0x00000002)
+#define WPDMA_GLO_CFG_ENABLE_RX_DMA	FIELD32(0x00000004)
+#define WPDMA_GLO_CFG_RX_DMA_BUSY	FIELD32(0x00000008)
+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE	FIELD32(0x00000030)
+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE	FIELD32(0x00000040)
+#define WPDMA_GLO_CFG_BIG_ENDIAN	FIELD32(0x00000080)
+#define WPDMA_GLO_CFG_RX_HDR_SCATTER	FIELD32(0x0000ff00)
+#define WPDMA_GLO_CFG_HDR_SEG_LEN	FIELD32(0xffff0000)
+
+/*
+ * WPDMA_RST_IDX
+ */
+#define WPDMA_RST_IDX 			0x020c
+#define WPDMA_RST_IDX_DTX_IDX0		FIELD32(0x00000001)
+#define WPDMA_RST_IDX_DTX_IDX1		FIELD32(0x00000002)
+#define WPDMA_RST_IDX_DTX_IDX2		FIELD32(0x00000004)
+#define WPDMA_RST_IDX_DTX_IDX3		FIELD32(0x00000008)
+#define WPDMA_RST_IDX_DTX_IDX4		FIELD32(0x00000010)
+#define WPDMA_RST_IDX_DTX_IDX5		FIELD32(0x00000020)
+#define WPDMA_RST_IDX_DRX_IDX0		FIELD32(0x00010000)
+
+/*
+ * DELAY_INT_CFG
+ */
+#define DELAY_INT_CFG			0x0210
+#define DELAY_INT_CFG_RXMAX_PTIME	FIELD32(0x000000ff)
+#define DELAY_INT_CFG_RXMAX_PINT	FIELD32(0x00007f00)
+#define DELAY_INT_CFG_RXDLY_INT_EN	FIELD32(0x00008000)
+#define DELAY_INT_CFG_TXMAX_PTIME	FIELD32(0x00ff0000)
+#define DELAY_INT_CFG_TXMAX_PINT	FIELD32(0x7f000000)
+#define DELAY_INT_CFG_TXDLY_INT_EN	FIELD32(0x80000000)
+
+/*
+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
+ * AIFSN0: AC_BE
+ * AIFSN1: AC_BK
+ * AIFSN1: AC_VI
+ * AIFSN1: AC_VO
+ */
+#define WMM_AIFSN_CFG			0x0214
+#define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
+#define WMM_AIFSN_CFG_AIFSN1		FIELD32(0x000000f0)
+#define WMM_AIFSN_CFG_AIFSN2		FIELD32(0x00000f00)
+#define WMM_AIFSN_CFG_AIFSN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
+ * CWMIN0: AC_BE
+ * CWMIN1: AC_BK
+ * CWMIN1: AC_VI
+ * CWMIN1: AC_VO
+ */
+#define WMM_CWMIN_CFG			0x0218
+#define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
+#define WMM_CWMIN_CFG_CWMIN1		FIELD32(0x000000f0)
+#define WMM_CWMIN_CFG_CWMIN2		FIELD32(0x00000f00)
+#define WMM_CWMIN_CFG_CWMIN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
+ * CWMAX0: AC_BE
+ * CWMAX1: AC_BK
+ * CWMAX1: AC_VI
+ * CWMAX1: AC_VO
+ */
+#define WMM_CWMAX_CFG			0x021c
+#define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
+#define WMM_CWMAX_CFG_CWMAX1		FIELD32(0x000000f0)
+#define WMM_CWMAX_CFG_CWMAX2		FIELD32(0x00000f00)
+#define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
+
+/*
+ * AC_TXOP0: AC_BK/AC_BE TXOP register
+ * AC0TXOP: AC_BK in unit of 32us
+ * AC1TXOP: AC_BE in unit of 32us
+ */
+#define WMM_TXOP0_CFG			0x0220
+#define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
+
+/*
+ * AC_TXOP1: AC_VO/AC_VI TXOP register
+ * AC2TXOP: AC_VI in unit of 32us
+ * AC3TXOP: AC_VO in unit of 32us
+ */
+#define WMM_TXOP1_CFG			0x0224
+#define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP1_CFG_AC3TXOP		FIELD32(0xffff0000)
+
+/*
+ * GPIO_CTRL_CFG:
+ */
+#define GPIO_CTRL_CFG			0x0228
+#define GPIO_CTRL_CFG_BIT0		FIELD32(0x00000001)
+#define GPIO_CTRL_CFG_BIT1		FIELD32(0x00000002)
+#define GPIO_CTRL_CFG_BIT2		FIELD32(0x00000004)
+#define GPIO_CTRL_CFG_BIT3		FIELD32(0x00000008)
+#define GPIO_CTRL_CFG_BIT4		FIELD32(0x00000010)
+#define GPIO_CTRL_CFG_BIT5		FIELD32(0x00000020)
+#define GPIO_CTRL_CFG_BIT6		FIELD32(0x00000040)
+#define GPIO_CTRL_CFG_BIT7		FIELD32(0x00000080)
+#define GPIO_CTRL_CFG_BIT8		FIELD32(0x00000100)
+
+/*
+ * MCU_CMD_CFG
+ */
+#define MCU_CMD_CFG			0x022c
+
+/*
+ * AC_BK register offsets
+ */
+#define TX_BASE_PTR0			0x0230
+#define TX_MAX_CNT0			0x0234
+#define TX_CTX_IDX0			0x0238
+#define TX_DTX_IDX0			0x023c
+
+/*
+ * AC_BE register offsets
+ */
+#define TX_BASE_PTR1			0x0240
+#define TX_MAX_CNT1			0x0244
+#define TX_CTX_IDX1			0x0248
+#define TX_DTX_IDX1			0x024c
+
+/*
+ * AC_VI register offsets
+ */
+#define TX_BASE_PTR2			0x0250
+#define TX_MAX_CNT2			0x0254
+#define TX_CTX_IDX2			0x0258
+#define TX_DTX_IDX2			0x025c
+
+/*
+ * AC_VO register offsets
+ */
+#define TX_BASE_PTR3			0x0260
+#define TX_MAX_CNT3			0x0264
+#define TX_CTX_IDX3			0x0268
+#define TX_DTX_IDX3			0x026c
+
+/*
+ * HCCA register offsets
+ */
+#define TX_BASE_PTR4			0x0270
+#define TX_MAX_CNT4			0x0274
+#define TX_CTX_IDX4			0x0278
+#define TX_DTX_IDX4			0x027c
+
+/*
+ * MGMT register offsets
+ */
+#define TX_BASE_PTR5			0x0280
+#define TX_MAX_CNT5			0x0284
+#define TX_CTX_IDX5			0x0288
+#define TX_DTX_IDX5			0x028c
+
+/*
+ * RX register offsets
+ */
+#define RX_BASE_PTR			0x0290
+#define RX_MAX_CNT			0x0294
+#define RX_CRX_IDX			0x0298
+#define RX_DRX_IDX			0x029c
+
+/*
+ * USB_DMA_CFG
+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
+ * PHY_CLEAR: phy watch dog enable.
+ * TX_CLEAR: Clear USB DMA TX path.
+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
+ * RX_BULK_EN: Enable USB DMA Rx.
+ * TX_BULK_EN: Enable USB DMA Tx.
+ * EP_OUT_VALID: OUT endpoint data valid.
+ * RX_BUSY: USB DMA RX FSM busy.
+ * TX_BUSY: USB DMA TX FSM busy.
+ */
+#define USB_DMA_CFG			0x02a0
+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT	FIELD32(0x000000ff)
+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT	FIELD32(0x0000ff00)
+#define USB_DMA_CFG_PHY_CLEAR		FIELD32(0x00010000)
+#define USB_DMA_CFG_TX_CLEAR		FIELD32(0x00080000)
+#define USB_DMA_CFG_TXOP_HALT		FIELD32(0x00100000)
+#define USB_DMA_CFG_RX_BULK_AGG_EN	FIELD32(0x00200000)
+#define USB_DMA_CFG_RX_BULK_EN		FIELD32(0x00400000)
+#define USB_DMA_CFG_TX_BULK_EN		FIELD32(0x00800000)
+#define USB_DMA_CFG_EP_OUT_VALID	FIELD32(0x3f000000)
+#define USB_DMA_CFG_RX_BUSY		FIELD32(0x40000000)
+#define USB_DMA_CFG_TX_BUSY		FIELD32(0x80000000)
+
+/*
+ * USB_CYC_CFG
+ */
+#define USB_CYC_CFG			0x02a4
+#define USB_CYC_CFG_CLOCK_CYCLE		FIELD32(0x000000ff)
+
+/*
+ * PBF_SYS_CTRL
+ * HOST_RAM_WRITE: enable Host program ram write selection
+ */
+#define PBF_SYS_CTRL			0x0400
+#define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
+#define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define PBF_CFG				0x0408
+#define PBF_MAX_PCNT			0x040c
+#define PBF_CTRL			0x0410
+#define PBF_INT_STA			0x0414
+#define PBF_INT_ENA			0x0418
+
+/*
+ * BCN_OFFSET0:
+ */
+#define BCN_OFFSET0			0x042c
+#define BCN_OFFSET0_BCN0		FIELD32(0x000000ff)
+#define BCN_OFFSET0_BCN1		FIELD32(0x0000ff00)
+#define BCN_OFFSET0_BCN2		FIELD32(0x00ff0000)
+#define BCN_OFFSET0_BCN3		FIELD32(0xff000000)
+
+/*
+ * BCN_OFFSET1:
+ */
+#define BCN_OFFSET1			0x0430
+#define BCN_OFFSET1_BCN4		FIELD32(0x000000ff)
+#define BCN_OFFSET1_BCN5		FIELD32(0x0000ff00)
+#define BCN_OFFSET1_BCN6		FIELD32(0x00ff0000)
+#define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define TXRXQ_PCNT			0x0438
+#define PBF_DBG				0x043c
+
+/*
+ * RF registers
+ */
+#define	RF_CSR_CFG			0x0500
+#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
+#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
+#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
+#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
+
+/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * MAC_CSR0: ASIC revision number.
+ * ASIC_REV: 0
+ * ASIC_VER: 2870
+ */
+#define MAC_CSR0			0x1000
+#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
+#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
+
+/*
+ * MAC_SYS_CTRL:
+ */
+#define MAC_SYS_CTRL			0x1004
+#define MAC_SYS_CTRL_RESET_CSR		FIELD32(0x00000001)
+#define MAC_SYS_CTRL_RESET_BBP		FIELD32(0x00000002)
+#define MAC_SYS_CTRL_ENABLE_TX		FIELD32(0x00000004)
+#define MAC_SYS_CTRL_ENABLE_RX		FIELD32(0x00000008)
+#define MAC_SYS_CTRL_CONTINUOUS_TX	FIELD32(0x00000010)
+#define MAC_SYS_CTRL_LOOPBACK		FIELD32(0x00000020)
+#define MAC_SYS_CTRL_WLAN_HALT		FIELD32(0x00000040)
+#define MAC_SYS_CTRL_RX_TIMESTAMP	FIELD32(0x00000080)
+
+/*
+ * MAC_ADDR_DW0: STA MAC register 0
+ */
+#define MAC_ADDR_DW0			0x1008
+#define MAC_ADDR_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_ADDR_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_ADDR_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_ADDR_DW1: STA MAC register 1
+ * UNICAST_TO_ME_MASK:
+ * Used to mask off bits from byte 5 of the MAC address
+ * to determine the UNICAST_TO_ME bit for RX frames.
+ * The full mask is complemented by BSS_ID_MASK:
+ *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
+ */
+#define MAC_ADDR_DW1			0x100c
+#define MAC_ADDR_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_ADDR_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
+
+/*
+ * MAC_BSSID_DW0: BSSID register 0
+ */
+#define MAC_BSSID_DW0			0x1010
+#define MAC_BSSID_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_BSSID_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_BSSID_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_BSSID_DW1: BSSID register 1
+ * BSS_ID_MASK:
+ *     0: 1-BSSID mode (BSS index = 0)
+ *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
+ *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
+ *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
+ * BSSID. This will make sure that those bits will be ignored
+ * when determining the MY_BSS of RX frames.
+ */
+#define MAC_BSSID_DW1			0x1014
+#define MAC_BSSID_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_BSSID_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW1_BSS_ID_MASK	FIELD32(0x00030000)
+#define MAC_BSSID_DW1_BSS_BCN_NUM	FIELD32(0x001c0000)
+
+/*
+ * MAX_LEN_CFG: Maximum frame length register.
+ * MAX_MPDU: rt2860b max 16k bytes
+ * MAX_PSDU: Maximum PSDU length
+ *	(power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
+ */
+#define MAX_LEN_CFG			0x1018
+#define MAX_LEN_CFG_MAX_MPDU		FIELD32(0x00000fff)
+#define MAX_LEN_CFG_MAX_PSDU		FIELD32(0x00003000)
+#define MAX_LEN_CFG_MIN_PSDU		FIELD32(0x0000c000)
+#define MAX_LEN_CFG_MIN_MPDU		FIELD32(0x000f0000)
+
+/*
+ * BBP_CSR_CFG: BBP serial control register
+ * VALUE: Register value to program into BBP
+ * REG_NUM: Selected BBP register
+ * READ_CONTROL: 0 write BBP, 1 read BBP
+ * BUSY: ASIC is busy executing BBP commands
+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
+ * BBP_RW_MODE: 0 serial, 1 paralell
+ */
+#define BBP_CSR_CFG			0x101c
+#define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
+#define BBP_CSR_CFG_REGNUM		FIELD32(0x0000ff00)
+#define BBP_CSR_CFG_READ_CONTROL	FIELD32(0x00010000)
+#define BBP_CSR_CFG_BUSY		FIELD32(0x00020000)
+#define BBP_CSR_CFG_BBP_PAR_DUR		FIELD32(0x00040000)
+#define BBP_CSR_CFG_BBP_RW_MODE		FIELD32(0x00080000)
+
+/*
+ * RF_CSR_CFG0: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * BITWIDTH: Selected RF register
+ * STANDBYMODE: 0 high when standby, 1 low when standby
+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
+ * BUSY: ASIC is busy executing RF commands
+ */
+#define RF_CSR_CFG0			0x1020
+#define RF_CSR_CFG0_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG0_BITWIDTH		FIELD32(0x1f000000)
+#define RF_CSR_CFG0_REG_VALUE_BW	FIELD32(0x1fffffff)
+#define RF_CSR_CFG0_STANDBYMODE		FIELD32(0x20000000)
+#define RF_CSR_CFG0_SEL			FIELD32(0x40000000)
+#define RF_CSR_CFG0_BUSY		FIELD32(0x80000000)
+
+/*
+ * RF_CSR_CFG1: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ *        0: 3 system clock cycle (37.5usec)
+ *        1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG1			0x1024
+#define RF_CSR_CFG1_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG1_RFGAP		FIELD32(0x1f000000)
+
+/*
+ * RF_CSR_CFG2: RF control register
+ * VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ *        0: 3 system clock cycle (37.5usec)
+ *        1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG2			0x1028
+#define RF_CSR_CFG2_VALUE		FIELD32(0x00ffffff)
+
+/*
+ * LED_CFG: LED control
+ * color LED's:
+ *   0: off
+ *   1: blinking upon TX2
+ *   2: periodic slow blinking
+ *   3: always on
+ * LED polarity:
+ *   0: active low
+ *   1: active high
+ */
+#define LED_CFG				0x102c
+#define LED_CFG_ON_PERIOD		FIELD32(0x000000ff)
+#define LED_CFG_OFF_PERIOD		FIELD32(0x0000ff00)
+#define LED_CFG_SLOW_BLINK_PERIOD	FIELD32(0x003f0000)
+#define LED_CFG_R_LED_MODE		FIELD32(0x03000000)
+#define LED_CFG_G_LED_MODE		FIELD32(0x0c000000)
+#define LED_CFG_Y_LED_MODE		FIELD32(0x30000000)
+#define LED_CFG_LED_POLAR		FIELD32(0x40000000)
+
+/*
+ * XIFS_TIME_CFG: MAC timing
+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
+ *	when MAC doesn't reference BBP signal BBRXEND
+ * EIFS: unit 1us
+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
+ *
+ */
+#define XIFS_TIME_CFG			0x1100
+#define XIFS_TIME_CFG_CCKM_SIFS_TIME	FIELD32(0x000000ff)
+#define XIFS_TIME_CFG_OFDM_SIFS_TIME	FIELD32(0x0000ff00)
+#define XIFS_TIME_CFG_OFDM_XIFS_TIME	FIELD32(0x000f0000)
+#define XIFS_TIME_CFG_EIFS		FIELD32(0x1ff00000)
+#define XIFS_TIME_CFG_BB_RXEND_ENABLE	FIELD32(0x20000000)
+
+/*
+ * BKOFF_SLOT_CFG:
+ */
+#define BKOFF_SLOT_CFG			0x1104
+#define BKOFF_SLOT_CFG_SLOT_TIME	FIELD32(0x000000ff)
+#define BKOFF_SLOT_CFG_CC_DELAY_TIME	FIELD32(0x0000ff00)
+
+/*
+ * NAV_TIME_CFG:
+ */
+#define NAV_TIME_CFG			0x1108
+#define NAV_TIME_CFG_SIFS		FIELD32(0x000000ff)
+#define NAV_TIME_CFG_SLOT_TIME		FIELD32(0x0000ff00)
+#define NAV_TIME_CFG_EIFS		FIELD32(0x01ff0000)
+#define NAV_TIME_ZERO_SIFS		FIELD32(0x02000000)
+
+/*
+ * CH_TIME_CFG: count as channel busy
+ */
+#define CH_TIME_CFG     	        0x110c
+
+/*
+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
+ */
+#define PBF_LIFE_TIMER     	        0x1110
+
+/*
+ * BCN_TIME_CFG:
+ * BEACON_INTERVAL: in unit of 1/16 TU
+ * TSF_TICKING: Enable TSF auto counting
+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
+ * BEACON_GEN: Enable beacon generator
+ */
+#define BCN_TIME_CFG			0x1114
+#define BCN_TIME_CFG_BEACON_INTERVAL	FIELD32(0x0000ffff)
+#define BCN_TIME_CFG_TSF_TICKING	FIELD32(0x00010000)
+#define BCN_TIME_CFG_TSF_SYNC		FIELD32(0x00060000)
+#define BCN_TIME_CFG_TBTT_ENABLE	FIELD32(0x00080000)
+#define BCN_TIME_CFG_BEACON_GEN		FIELD32(0x00100000)
+#define BCN_TIME_CFG_TX_TIME_COMPENSATE	FIELD32(0xf0000000)
+
+/*
+ * TBTT_SYNC_CFG:
+ */
+#define TBTT_SYNC_CFG			0x1118
+
+/*
+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
+ */
+#define TSF_TIMER_DW0			0x111c
+#define TSF_TIMER_DW0_LOW_WORD		FIELD32(0xffffffff)
+
+/*
+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
+ */
+#define TSF_TIMER_DW1			0x1120
+#define TSF_TIMER_DW1_HIGH_WORD		FIELD32(0xffffffff)
+
+/*
+ * TBTT_TIMER: TImer remains till next TBTT, read-only
+ */
+#define TBTT_TIMER			0x1124
+
+/*
+ * INT_TIMER_CFG:
+ */
+#define INT_TIMER_CFG			0x1128
+
+/*
+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
+ */
+#define INT_TIMER_EN			0x112c
+
+/*
+ * CH_IDLE_STA: channel idle time
+ */
+#define CH_IDLE_STA			0x1130
+
+/*
+ * CH_BUSY_STA: channel busy time
+ */
+#define CH_BUSY_STA			0x1134
+
+/*
+ * MAC_STATUS_CFG:
+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
+ *	if 1 or higher one of the 2 registers is busy.
+ */
+#define MAC_STATUS_CFG			0x1200
+#define MAC_STATUS_CFG_BBP_RF_BUSY	FIELD32(0x00000003)
+
+/*
+ * PWR_PIN_CFG:
+ */
+#define PWR_PIN_CFG			0x1204
+
+/*
+ * AUTOWAKEUP_CFG: Manual power control / status register
+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
+ * AUTOWAKE: 0:sleep, 1:awake
+ */
+#define AUTOWAKEUP_CFG			0x1208
+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME	FIELD32(0x000000ff)
+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE	FIELD32(0x00007f00)
+#define AUTOWAKEUP_CFG_AUTOWAKE		FIELD32(0x00008000)
+
+/*
+ * EDCA_AC0_CFG:
+ */
+#define EDCA_AC0_CFG			0x1300
+#define EDCA_AC0_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC0_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC0_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC0_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC1_CFG:
+ */
+#define EDCA_AC1_CFG			0x1304
+#define EDCA_AC1_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC1_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC1_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC1_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC2_CFG:
+ */
+#define EDCA_AC2_CFG			0x1308
+#define EDCA_AC2_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC2_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC2_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC2_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC3_CFG:
+ */
+#define EDCA_AC3_CFG			0x130c
+#define EDCA_AC3_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC3_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC3_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC3_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_TID_AC_MAP:
+ */
+#define EDCA_TID_AC_MAP			0x1310
+
+/*
+ * TX_PWR_CFG_0:
+ */
+#define TX_PWR_CFG_0			0x1314
+#define TX_PWR_CFG_0_1MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_0_2MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_0_55MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_0_11MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_0_6MBS		FIELD32(0x000f0000)
+#define TX_PWR_CFG_0_9MBS		FIELD32(0x00f00000)
+#define TX_PWR_CFG_0_12MBS		FIELD32(0x0f000000)
+#define TX_PWR_CFG_0_18MBS		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_1:
+ */
+#define TX_PWR_CFG_1			0x1318
+#define TX_PWR_CFG_1_24MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_1_36MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_1_48MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_1_54MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_1_MCS0		FIELD32(0x000f0000)
+#define TX_PWR_CFG_1_MCS1		FIELD32(0x00f00000)
+#define TX_PWR_CFG_1_MCS2		FIELD32(0x0f000000)
+#define TX_PWR_CFG_1_MCS3		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_2:
+ */
+#define TX_PWR_CFG_2			0x131c
+#define TX_PWR_CFG_2_MCS4		FIELD32(0x0000000f)
+#define TX_PWR_CFG_2_MCS5		FIELD32(0x000000f0)
+#define TX_PWR_CFG_2_MCS6		FIELD32(0x00000f00)
+#define TX_PWR_CFG_2_MCS7		FIELD32(0x0000f000)
+#define TX_PWR_CFG_2_MCS8		FIELD32(0x000f0000)
+#define TX_PWR_CFG_2_MCS9		FIELD32(0x00f00000)
+#define TX_PWR_CFG_2_MCS10		FIELD32(0x0f000000)
+#define TX_PWR_CFG_2_MCS11		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_3:
+ */
+#define TX_PWR_CFG_3			0x1320
+#define TX_PWR_CFG_3_MCS12		FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_MCS13		FIELD32(0x000000f0)
+#define TX_PWR_CFG_3_MCS14		FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_MCS15		FIELD32(0x0000f000)
+#define TX_PWR_CFG_3_UKNOWN1		FIELD32(0x000f0000)
+#define TX_PWR_CFG_3_UKNOWN2		FIELD32(0x00f00000)
+#define TX_PWR_CFG_3_UKNOWN3		FIELD32(0x0f000000)
+#define TX_PWR_CFG_3_UKNOWN4		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_4:
+ */
+#define TX_PWR_CFG_4			0x1324
+#define TX_PWR_CFG_4_UKNOWN5		FIELD32(0x0000000f)
+#define TX_PWR_CFG_4_UKNOWN6		FIELD32(0x000000f0)
+#define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
+#define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
+
+/*
+ * TX_PIN_CFG:
+ */
+#define TX_PIN_CFG			0x1328
+#define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
+#define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
+#define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
+#define TX_PIN_CFG_PA_PE_G1_EN		FIELD32(0x00000008)
+#define TX_PIN_CFG_PA_PE_A0_POL		FIELD32(0x00000010)
+#define TX_PIN_CFG_PA_PE_G0_POL		FIELD32(0x00000020)
+#define TX_PIN_CFG_PA_PE_A1_POL		FIELD32(0x00000040)
+#define TX_PIN_CFG_PA_PE_G1_POL		FIELD32(0x00000080)
+#define TX_PIN_CFG_LNA_PE_A0_EN		FIELD32(0x00000100)
+#define TX_PIN_CFG_LNA_PE_G0_EN		FIELD32(0x00000200)
+#define TX_PIN_CFG_LNA_PE_A1_EN		FIELD32(0x00000400)
+#define TX_PIN_CFG_LNA_PE_G1_EN		FIELD32(0x00000800)
+#define TX_PIN_CFG_LNA_PE_A0_POL	FIELD32(0x00001000)
+#define TX_PIN_CFG_LNA_PE_G0_POL	FIELD32(0x00002000)
+#define TX_PIN_CFG_LNA_PE_A1_POL	FIELD32(0x00004000)
+#define TX_PIN_CFG_LNA_PE_G1_POL	FIELD32(0x00008000)
+#define TX_PIN_CFG_RFTR_EN		FIELD32(0x00010000)
+#define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
+#define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
+#define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
+
+/*
+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
+ */
+#define TX_BAND_CFG			0x132c
+#define TX_BAND_CFG_HT40_PLUS		FIELD32(0x00000001)
+#define TX_BAND_CFG_A			FIELD32(0x00000002)
+#define TX_BAND_CFG_BG			FIELD32(0x00000004)
+
+/*
+ * TX_SW_CFG0:
+ */
+#define TX_SW_CFG0			0x1330
+
+/*
+ * TX_SW_CFG1:
+ */
+#define TX_SW_CFG1			0x1334
+
+/*
+ * TX_SW_CFG2:
+ */
+#define TX_SW_CFG2			0x1338
+
+/*
+ * TXOP_THRES_CFG:
+ */
+#define TXOP_THRES_CFG			0x133c
+
+/*
+ * TXOP_CTRL_CFG:
+ */
+#define TXOP_CTRL_CFG			0x1340
+
+/*
+ * TX_RTS_CFG:
+ * RTS_THRES: unit:byte
+ * RTS_FBK_EN: enable rts rate fallback
+ */
+#define TX_RTS_CFG			0x1344
+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTS_CFG_RTS_THRES		FIELD32(0x00ffff00)
+#define TX_RTS_CFG_RTS_FBK_EN		FIELD32(0x01000000)
+
+/*
+ * TX_TIMEOUT_CFG:
+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
+ *                it is recommended that:
+ *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
+ */
+#define TX_TIMEOUT_CFG			0x1348
+#define TX_TIMEOUT_CFG_MPDU_LIFETIME	FIELD32(0x000000f0)
+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT	FIELD32(0x0000ff00)
+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT	FIELD32(0x00ff0000)
+
+/*
+ * TX_RTY_CFG:
+ * SHORT_RTY_LIMIT: short retry limit
+ * LONG_RTY_LIMIT: long retry limit
+ * LONG_RTY_THRE: Long retry threshoold
+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
+ *                   0:expired by retry limit, 1: expired by mpdu life timer
+ * AGG_RTY_MODE: Aggregate MPDU retry mode
+ *               0:expired by retry limit, 1: expired by mpdu life timer
+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
+ */
+#define TX_RTY_CFG			0x134c
+#define TX_RTY_CFG_SHORT_RTY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTY_CFG_LONG_RTY_LIMIT	FIELD32(0x0000ff00)
+#define TX_RTY_CFG_LONG_RTY_THRE	FIELD32(0x0fff0000)
+#define TX_RTY_CFG_NON_AGG_RTY_MODE	FIELD32(0x10000000)
+#define TX_RTY_CFG_AGG_RTY_MODE		FIELD32(0x20000000)
+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE	FIELD32(0x40000000)
+
+/*
+ * TX_LINK_CFG:
+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
+ * MFB_ENABLE: TX apply remote MFB 1:enable
+ * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
+ *                     0: not apply remote remote unsolicit (MFS=7)
+ * TX_MRQ_EN: MCS request TX enable
+ * TX_RDG_EN: RDG TX enable
+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
+ * REMOTE_MFB: remote MCS feedback
+ * REMOTE_MFS: remote MCS feedback sequence number
+ */
+#define TX_LINK_CFG			0x1350
+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME	FIELD32(0x000000ff)
+#define TX_LINK_CFG_MFB_ENABLE		FIELD32(0x00000100)
+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE	FIELD32(0x00000200)
+#define TX_LINK_CFG_TX_MRQ_EN		FIELD32(0x00000400)
+#define TX_LINK_CFG_TX_RDG_EN		FIELD32(0x00000800)
+#define TX_LINK_CFG_TX_CF_ACK_EN	FIELD32(0x00001000)
+#define TX_LINK_CFG_REMOTE_MFB		FIELD32(0x00ff0000)
+#define TX_LINK_CFG_REMOTE_MFS		FIELD32(0xff000000)
+
+/*
+ * HT_FBK_CFG0:
+ */
+#define HT_FBK_CFG0			0x1354
+#define HT_FBK_CFG0_HTMCS0FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG0_HTMCS1FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG0_HTMCS2FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG0_HTMCS3FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG0_HTMCS4FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG0_HTMCS5FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG0_HTMCS6FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG0_HTMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * HT_FBK_CFG1:
+ */
+#define HT_FBK_CFG1			0x1358
+#define HT_FBK_CFG1_HTMCS8FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG1_HTMCS9FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG1_HTMCS10FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG1_HTMCS11FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG1_HTMCS12FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG1_HTMCS13FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG1_HTMCS14FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG1_HTMCS15FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG0:
+ */
+#define LG_FBK_CFG0			0x135c
+#define LG_FBK_CFG0_OFDMMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_OFDMMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_OFDMMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_OFDMMCS3FBK		FIELD32(0x0000f000)
+#define LG_FBK_CFG0_OFDMMCS4FBK		FIELD32(0x000f0000)
+#define LG_FBK_CFG0_OFDMMCS5FBK		FIELD32(0x00f00000)
+#define LG_FBK_CFG0_OFDMMCS6FBK		FIELD32(0x0f000000)
+#define LG_FBK_CFG0_OFDMMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG1:
+ */
+#define LG_FBK_CFG1			0x1360
+#define LG_FBK_CFG0_CCKMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_CCKMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_CCKMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_CCKMCS3FBK		FIELD32(0x0000f000)
+
+/*
+ * CCK_PROT_CFG: CCK Protection
+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
+ * PROTECT_CTRL: Protection control frame type for CCK TX
+ *               0:none, 1:RTS/CTS, 2:CTS-to-self
+ * PROTECT_NAV: TXOP protection type for CCK TX
+ *              0:none, 1:ShortNAVprotect, 2:LongNAVProtect
+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
+ * RTS_TH_EN: RTS threshold enable on CCK TX
+ */
+#define CCK_PROT_CFG			0x1364
+#define CCK_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define CCK_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define CCK_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define CCK_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * OFDM_PROT_CFG: OFDM Protection
+ */
+#define OFDM_PROT_CFG			0x1368
+#define OFDM_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define OFDM_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define OFDM_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define OFDM_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM20_PROT_CFG: MM20 Protection
+ */
+#define MM20_PROT_CFG			0x136c
+#define MM20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM40_PROT_CFG: MM40 Protection
+ */
+#define MM40_PROT_CFG			0x1370
+#define MM40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF20_PROT_CFG: GF20 Protection
+ */
+#define GF20_PROT_CFG			0x1374
+#define GF20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF40_PROT_CFG: GF40 Protection
+ */
+#define GF40_PROT_CFG			0x1378
+#define GF40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * EXP_CTS_TIME:
+ */
+#define EXP_CTS_TIME			0x137c
+
+/*
+ * EXP_ACK_TIME:
+ */
+#define EXP_ACK_TIME			0x1380
+
+/*
+ * RX_FILTER_CFG: RX configuration register.
+ */
+#define RX_FILTER_CFG			0x1400
+#define RX_FILTER_CFG_DROP_CRC_ERROR	FIELD32(0x00000001)
+#define RX_FILTER_CFG_DROP_PHY_ERROR	FIELD32(0x00000002)
+#define RX_FILTER_CFG_DROP_NOT_TO_ME	FIELD32(0x00000004)
+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD	FIELD32(0x00000008)
+#define RX_FILTER_CFG_DROP_VER_ERROR	FIELD32(0x00000010)
+#define RX_FILTER_CFG_DROP_MULTICAST	FIELD32(0x00000020)
+#define RX_FILTER_CFG_DROP_BROADCAST	FIELD32(0x00000040)
+#define RX_FILTER_CFG_DROP_DUPLICATE	FIELD32(0x00000080)
+#define RX_FILTER_CFG_DROP_CF_END_ACK	FIELD32(0x00000100)
+#define RX_FILTER_CFG_DROP_CF_END	FIELD32(0x00000200)
+#define RX_FILTER_CFG_DROP_ACK		FIELD32(0x00000400)
+#define RX_FILTER_CFG_DROP_CTS		FIELD32(0x00000800)
+#define RX_FILTER_CFG_DROP_RTS		FIELD32(0x00001000)
+#define RX_FILTER_CFG_DROP_PSPOLL	FIELD32(0x00002000)
+#define RX_FILTER_CFG_DROP_BA		FIELD32(0x00004000)
+#define RX_FILTER_CFG_DROP_BAR		FIELD32(0x00008000)
+#define RX_FILTER_CFG_DROP_CNTL		FIELD32(0x00010000)
+
+/*
+ * AUTO_RSP_CFG:
+ * AUTORESPONDER: 0: disable, 1: enable
+ * BAC_ACK_POLICY: 0:long, 1:short preamble
+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
+ * DUAL_CTS_EN: Power bit value in control frame
+ * ACK_CTS_PSM_BIT:Power bit value in control frame
+ */
+#define AUTO_RSP_CFG			0x1404
+#define AUTO_RSP_CFG_AUTORESPONDER	FIELD32(0x00000001)
+#define AUTO_RSP_CFG_BAC_ACK_POLICY	FIELD32(0x00000002)
+#define AUTO_RSP_CFG_CTS_40_MMODE	FIELD32(0x00000004)
+#define AUTO_RSP_CFG_CTS_40_MREF	FIELD32(0x00000008)
+#define AUTO_RSP_CFG_AR_PREAMBLE	FIELD32(0x00000010)
+#define AUTO_RSP_CFG_DUAL_CTS_EN	FIELD32(0x00000040)
+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT	FIELD32(0x00000080)
+
+/*
+ * LEGACY_BASIC_RATE:
+ */
+#define LEGACY_BASIC_RATE		0x1408
+
+/*
+ * HT_BASIC_RATE:
+ */
+#define HT_BASIC_RATE			0x140c
+
+/*
+ * HT_CTRL_CFG:
+ */
+#define HT_CTRL_CFG			0x1410
+
+/*
+ * SIFS_COST_CFG:
+ */
+#define SIFS_COST_CFG			0x1414
+
+/*
+ * RX_PARSER_CFG:
+ * Set NAV for all received frames
+ */
+#define RX_PARSER_CFG			0x1418
+
+/*
+ * TX_SEC_CNT0:
+ */
+#define TX_SEC_CNT0			0x1500
+
+/*
+ * RX_SEC_CNT0:
+ */
+#define RX_SEC_CNT0			0x1504
+
+/*
+ * CCMP_FC_MUTE:
+ */
+#define CCMP_FC_MUTE			0x1508
+
+/*
+ * TXOP_HLDR_ADDR0:
+ */
+#define TXOP_HLDR_ADDR0			0x1600
+
+/*
+ * TXOP_HLDR_ADDR1:
+ */
+#define TXOP_HLDR_ADDR1			0x1604
+
+/*
+ * TXOP_HLDR_ET:
+ */
+#define TXOP_HLDR_ET			0x1608
+
+/*
+ * QOS_CFPOLL_RA_DW0:
+ */
+#define QOS_CFPOLL_RA_DW0		0x160c
+
+/*
+ * QOS_CFPOLL_RA_DW1:
+ */
+#define QOS_CFPOLL_RA_DW1		0x1610
+
+/*
+ * QOS_CFPOLL_QC:
+ */
+#define QOS_CFPOLL_QC			0x1614
+
+/*
+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
+ */
+#define RX_STA_CNT0			0x1700
+#define RX_STA_CNT0_CRC_ERR		FIELD32(0x0000ffff)
+#define RX_STA_CNT0_PHY_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
+ */
+#define RX_STA_CNT1			0x1704
+#define RX_STA_CNT1_FALSE_CCA		FIELD32(0x0000ffff)
+#define RX_STA_CNT1_PLCP_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT2:
+ */
+#define RX_STA_CNT2			0x1708
+#define RX_STA_CNT2_RX_DUPLI_COUNT	FIELD32(0x0000ffff)
+#define RX_STA_CNT2_RX_FIFO_OVERFLOW	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT0: TX Beacon count
+ */
+#define TX_STA_CNT0			0x170c
+#define TX_STA_CNT0_TX_FAIL_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT0_TX_BEACON_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT1: TX tx count
+ */
+#define TX_STA_CNT1			0x1710
+#define TX_STA_CNT1_TX_SUCCESS		FIELD32(0x0000ffff)
+#define TX_STA_CNT1_TX_RETRANSMIT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT2: TX tx count
+ */
+#define TX_STA_CNT2			0x1714
+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_FIFO: TX Result for specific PID status fifo register
+ */
+#define TX_STA_FIFO			0x1718
+#define TX_STA_FIFO_VALID		FIELD32(0x00000001)
+#define TX_STA_FIFO_PID_TYPE		FIELD32(0x0000001e)
+#define TX_STA_FIFO_TX_SUCCESS		FIELD32(0x00000020)
+#define TX_STA_FIFO_TX_AGGRE		FIELD32(0x00000040)
+#define TX_STA_FIFO_TX_ACK_REQUIRED	FIELD32(0x00000080)
+#define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
+#define TX_STA_FIFO_SUCCESS_RATE	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT: Debug counter
+ */
+#define TX_AGG_CNT			0x171c
+#define TX_AGG_CNT_NON_AGG_TX_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT_AGG_TX_COUNT		FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT0:
+ */
+#define TX_AGG_CNT0			0x1720
+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT1:
+ */
+#define TX_AGG_CNT1			0x1724
+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT2:
+ */
+#define TX_AGG_CNT2			0x1728
+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT3:
+ */
+#define TX_AGG_CNT3			0x172c
+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT4:
+ */
+#define TX_AGG_CNT4			0x1730
+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT5:
+ */
+#define TX_AGG_CNT5			0x1734
+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT6:
+ */
+#define TX_AGG_CNT6			0x1738
+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT7:
+ */
+#define TX_AGG_CNT7			0x173c
+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT	FIELD32(0xffff0000)
+
+/*
+ * MPDU_DENSITY_CNT:
+ * TX_ZERO_DEL: TX zero length delimiter count
+ * RX_ZERO_DEL: RX zero length delimiter count
+ */
+#define MPDU_DENSITY_CNT		0x1740
+#define MPDU_DENSITY_CNT_TX_ZERO_DEL	FIELD32(0x0000ffff)
+#define MPDU_DENSITY_CNT_RX_ZERO_DEL	FIELD32(0xffff0000)
+
+/*
+ * Security key table memory.
+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
+ */
+#define MAC_WCID_BASE			0x1800
+#define PAIRWISE_KEY_TABLE_BASE		0x4000
+#define MAC_IVEIV_TABLE_BASE		0x6000
+#define MAC_WCID_ATTRIBUTE_BASE		0x6800
+#define SHARED_KEY_TABLE_BASE		0x6c00
+#define SHARED_KEY_MODE_BASE		0x7000
+
+#define MAC_WCID_ENTRY(__idx) \
+	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define MAC_IVEIV_ENTRY(__idx) \
+	( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
+#define MAC_WCID_ATTR_ENTRY(__idx) \
+	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
+#define SHARED_KEY_ENTRY(__idx) \
+	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define SHARED_KEY_MODE_ENTRY(__idx) \
+	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
+
+struct mac_wcid_entry {
+	u8 mac[6];
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+struct hw_key_entry {
+	u8 key[16];
+	u8 tx_mic[8];
+	u8 rx_mic[8];
+} __attribute__ ((packed));
+
+struct mac_iveiv_entry {
+	u8 iv[8];
+} __attribute__ ((packed));
+
+/*
+ * MAC_WCID_ATTRIBUTE:
+ */
+#define MAC_WCID_ATTRIBUTE_KEYTAB	FIELD32(0x00000001)
+#define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
+#define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
+
+/*
+ * SHARED_KEY_MODE:
+ */
+#define SHARED_KEY_MODE_BSS0_KEY0	FIELD32(0x00000007)
+#define SHARED_KEY_MODE_BSS0_KEY1	FIELD32(0x00000070)
+#define SHARED_KEY_MODE_BSS0_KEY2	FIELD32(0x00000700)
+#define SHARED_KEY_MODE_BSS0_KEY3	FIELD32(0x00007000)
+#define SHARED_KEY_MODE_BSS1_KEY0	FIELD32(0x00070000)
+#define SHARED_KEY_MODE_BSS1_KEY1	FIELD32(0x00700000)
+#define SHARED_KEY_MODE_BSS1_KEY2	FIELD32(0x07000000)
+#define SHARED_KEY_MODE_BSS1_KEY3	FIELD32(0x70000000)
+
+/*
+ * HOST-MCU communication
+ */
+
+/*
+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ */
+#define H2M_MAILBOX_CSR			0x7010
+#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_CID:
+ */
+#define H2M_MAILBOX_CID			0x7014
+#define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CID_CMD1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CID_CMD2		FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CID_CMD3		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_STATUS:
+ */
+#define H2M_MAILBOX_STATUS		0x701c
+
+/*
+ * H2M_INT_SRC:
+ */
+#define H2M_INT_SRC			0x7024
+
+/*
+ * H2M_BBP_AGENT:
+ */
+#define H2M_BBP_AGENT			0x7028
+
+/*
+ * MCU_LEDCS: LED control for MCU Mailbox.
+ */
+#define MCU_LEDCS_LED_MODE		FIELD8(0x1f)
+#define MCU_LEDCS_POLARITY		FIELD8(0x01)
+
+/*
+ * HW_CS_CTS_BASE:
+ * Carrier-sense CTS frame base address.
+ * It's where mac stores carrier-sense frame for carrier-sense function.
+ */
+#define HW_CS_CTS_BASE			0x7700
+
+/*
+ * HW_DFS_CTS_BASE:
+ * FS CTS frame base address. It's where mac stores CTS frame for DFS.
+ */
+#define HW_DFS_CTS_BASE			0x7780
+
+/*
+ * TXRX control registers - base address 0x3000
+ */
+
+/*
+ * TXRX_CSR1:
+ * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
+ */
+#define TXRX_CSR1			0x77d0
+
+/*
+ * HW_DEBUG_SETTING_BASE:
+ * since NULL frame won't be that long (256 byte)
+ * We steal 16 tail bytes to save debugging settings
+ */
+#define HW_DEBUG_SETTING_BASE		0x77f0
+#define HW_DEBUG_SETTING_BASE2		0x7770
+
+/*
+ * HW_BEACON_BASE
+ * In order to support maximum 8 MBSS and its maximum length
+ * is 512 bytes for each beacon
+ * Three section discontinue memory segments will be used.
+ * 1. The original region for BCN 0~3
+ * 2. Extract memory from FCE table for BCN 4~5
+ * 3. Extract memory from Pair-wise key table for BCN 6~7
+ *    It occupied those memory of wcid 238~253 for BCN 6
+ *    and wcid 222~237 for BCN 7
+ *
+ * IMPORTANT NOTE: Not sure why legacy driver does this,
+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
+ */
+#define HW_BEACON_BASE0			0x7800
+#define HW_BEACON_BASE1			0x7a00
+#define HW_BEACON_BASE2			0x7c00
+#define HW_BEACON_BASE3			0x7e00
+#define HW_BEACON_BASE4			0x7200
+#define HW_BEACON_BASE5			0x7400
+#define HW_BEACON_BASE6			0x5dc0
+#define HW_BEACON_BASE7			0x5bc0
+
+#define HW_BEACON_OFFSET(__index) \
+	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
+	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
+	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
+
+/*
+ * 8051 firmware image.
+ */
+#define FIRMWARE_RT2870			"rt2870.bin"
+#define FIRMWARE_IMAGE_BASE		0x3000
+
+/*
+ * BBP registers.
+ * The wordsize of the BBP is 8 bits.
+ */
+
+/*
+ * BBP 1: TX Antenna
+ */
+#define BBP1_TX_POWER			FIELD8(0x07)
+#define BBP1_TX_ANTENNA			FIELD8(0x18)
+
+/*
+ * BBP 3: RX Antenna
+ */
+#define BBP3_RX_ANTENNA			FIELD8(0x18)
+#define BBP3_HT40_PLUS			FIELD8(0x20)
+
+/*
+ * BBP 4: Bandwidth
+ */
+#define BBP4_TX_BF			FIELD8(0x01)
+#define BBP4_BANDWIDTH			FIELD8(0x18)
+
+/*
+ * RFCSR registers
+ * The wordsize of the RFCSR is 8 bits.
+ */
+
+/*
+ * RFCSR 6:
+ */
+#define RFCSR6_R			FIELD8(0x03)
+
+/*
+ * RFCSR 7:
+ */
+#define RFCSR7_RF_TUNING		FIELD8(0x01)
+
+/*
+ * RFCSR 12:
+ */
+#define RFCSR12_TX_POWER		FIELD8(0x1f)
+
+/*
+ * RFCSR 22:
+ */
+#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
+
+/*
+ * RFCSR 23:
+ */
+#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
+
+/*
+ * RFCSR 30:
+ */
+#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
+
+/*
+ * RF registers
+ */
+
+/*
+ * RF 2
+ */
+#define RF2_ANTENNA_RX2			FIELD32(0x00000040)
+#define RF2_ANTENNA_TX1			FIELD32(0x00004000)
+#define RF2_ANTENNA_RX1			FIELD32(0x00020000)
+
+/*
+ * RF 3
+ */
+#define RF3_TXPOWER_G			FIELD32(0x00003e00)
+#define RF3_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000200)
+#define RF3_TXPOWER_A			FIELD32(0x00003c00)
+
+/*
+ * RF 4
+ */
+#define RF4_TXPOWER_G			FIELD32(0x000007c0)
+#define RF4_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000040)
+#define RF4_TXPOWER_A			FIELD32(0x00000780)
+#define RF4_FREQ_OFFSET			FIELD32(0x001f8000)
+#define RF4_HT40			FIELD32(0x00200000)
+
+/*
+ * EEPROM content.
+ * The wordsize of the EEPROM is 16 bits.
+ */
+
+/*
+ * EEPROM Version
+ */
+#define EEPROM_VERSION			0x0001
+#define EEPROM_VERSION_FAE		FIELD16(0x00ff)
+#define EEPROM_VERSION_VERSION		FIELD16(0xff00)
+
+/*
+ * HW MAC address.
+ */
+#define EEPROM_MAC_ADDR_0		0x0002
+#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_1		0x0003
+#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_2		0x0004
+#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
+
+/*
+ * EEPROM ANTENNA config
+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
+ * TXPATH: 1: 1T, 2: 2T
+ */
+#define	EEPROM_ANTENNA			0x001a
+#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
+#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
+#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
+
+/*
+ * EEPROM NIC config
+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
+ */
+#define	EEPROM_NIC			0x001b
+#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
+#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
+#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
+#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
+#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
+#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
+#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
+#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
+#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
+#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
+
+/*
+ * EEPROM frequency
+ */
+#define	EEPROM_FREQ			0x001d
+#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
+#define EEPROM_FREQ_LED_MODE		FIELD16(0x7f00)
+#define EEPROM_FREQ_LED_POLARITY	FIELD16(0x1000)
+
+/*
+ * EEPROM LED
+ * POLARITY_RDY_G: Polarity RDY_G setting.
+ * POLARITY_RDY_A: Polarity RDY_A setting.
+ * POLARITY_ACT: Polarity ACT setting.
+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
+ * LED_MODE: Led mode.
+ */
+#define EEPROM_LED1			0x001e
+#define EEPROM_LED2			0x001f
+#define EEPROM_LED3			0x0020
+#define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
+#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
+#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
+#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
+#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
+#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
+#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
+#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
+#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
+
+/*
+ * EEPROM LNA
+ */
+#define EEPROM_LNA			0x0022
+#define EEPROM_LNA_BG			FIELD16(0x00ff)
+#define EEPROM_LNA_A0			FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG offset
+ */
+#define EEPROM_RSSI_BG			0x0023
+#define EEPROM_RSSI_BG_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG2 offset
+ */
+#define EEPROM_RSSI_BG2			0x0024
+#define EEPROM_RSSI_BG2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG2_LNA_A1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A offset
+ */
+#define EEPROM_RSSI_A			0x0025
+#define EEPROM_RSSI_A_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_A_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A2 offset
+ */
+#define EEPROM_RSSI_A2			0x0026
+#define EEPROM_RSSI_A2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
+ *	This is delta in 40MHZ.
+ * VALUE: Tx Power dalta value (MAX=4)
+ * TYPE: 1: Plus the delta value, 0: minus the delta value
+ * TXPOWER: Enable:
+ */
+#define EEPROM_TXPOWER_DELTA		0x0028
+#define EEPROM_TXPOWER_DELTA_VALUE	FIELD16(0x003f)
+#define EEPROM_TXPOWER_DELTA_TYPE	FIELD16(0x0040)
+#define EEPROM_TXPOWER_DELTA_TXPOWER	FIELD16(0x0080)
+
+/*
+ * EEPROM TXPOWER 802.11BG
+ */
+#define	EEPROM_TXPOWER_BG1		0x0029
+#define	EEPROM_TXPOWER_BG2		0x0030
+#define EEPROM_TXPOWER_BG_SIZE		7
+#define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXPOWER 802.11A
+ */
+#define EEPROM_TXPOWER_A1		0x003c
+#define EEPROM_TXPOWER_A2		0x0053
+#define EEPROM_TXPOWER_A_SIZE		6
+#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower byrate: 20MHZ power
+ */
+#define EEPROM_TXPOWER_BYRATE		0x006f
+
+/*
+ * EEPROM BBP.
+ */
+#define	EEPROM_BBP_START		0x0078
+#define EEPROM_BBP_SIZE			16
+#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
+#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
+
+/*
+ * MCU mailbox commands.
+ */
+#define MCU_SLEEP			0x30
+#define MCU_WAKEUP			0x31
+#define MCU_RADIO_OFF			0x35
+#define MCU_CURRENT			0x36
+#define MCU_LED				0x50
+#define MCU_LED_STRENGTH		0x51
+#define MCU_LED_1			0x52
+#define MCU_LED_2			0x53
+#define MCU_LED_3			0x54
+#define MCU_RADAR			0x60
+#define MCU_BOOT_SIGNAL			0x72
+#define MCU_BBP_SIGNAL			0x80
+#define MCU_POWER_SAVE			0x83
+
+/*
+ * MCU mailbox tokens
+ */
+#define TOKEN_WAKUP			3
+
+/*
+ * DMA descriptor defines.
+ */
+#define TXD_DESC_SIZE			( 4 * sizeof(__le32) )
+#define TXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
+#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXD_DESC_SIZE			( 1 * sizeof(__le32) )
+#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+
+/*
+ * TX descriptor format for TX, PRIO and Beacon Ring.
+ */
+
+/*
+ * Word0
+ */
+#define TXD_W0_SD_PTR0			FIELD32(0xffffffff)
+
+/*
+ * Word1
+ */
+#define TXD_W1_SD_LEN1			FIELD32(0x00003fff)
+#define TXD_W1_LAST_SEC1		FIELD32(0x00004000)
+#define TXD_W1_BURST			FIELD32(0x00008000)
+#define TXD_W1_SD_LEN0			FIELD32(0x3fff0000)
+#define TXD_W1_LAST_SEC0		FIELD32(0x40000000)
+#define TXD_W1_DMA_DONE			FIELD32(0x80000000)
+
+/*
+ * Word2
+ */
+#define TXD_W2_SD_PTR1			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ * WIV: Wireless Info Valid. 1: Driver filled WI,  0: DMA needs to copy WI
+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
+ *       0:MGMT, 1:HCCA 2:EDCA
+ */
+#define TXD_W3_WIV			FIELD32(0x01000000)
+#define TXD_W3_QSEL			FIELD32(0x06000000)
+#define TXD_W3_TCO			FIELD32(0x20000000)
+#define TXD_W3_UCO			FIELD32(0x40000000)
+#define TXD_W3_ICO			FIELD32(0x80000000)
+
+/*
+ * TX Info structure
+ */
+
+/*
+ * Word0
+ * WIV: Wireless Info Valid. 1: Driver filled WI,  0: DMA needs to copy WI
+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
+ *       0:MGMT, 1:HCCA 2:EDCA
+ * USB_DMA_NEXT_VALID: Used ONLY in USB bulk Aggregation, NextValid
+ * DMA_TX_BURST: used ONLY in USB bulk Aggregation.
+ *               Force USB DMA transmit frame from current selected endpoint
+ */
+#define TXINFO_W0_USB_DMA_TX_PKT_LEN	FIELD32(0x0000ffff)
+#define TXINFO_W0_WIV			FIELD32(0x01000000)
+#define TXINFO_W0_QSEL			FIELD32(0x06000000)
+#define TXINFO_W0_SW_USE_LAST_ROUND	FIELD32(0x08000000)
+#define TXINFO_W0_USB_DMA_NEXT_VALID	FIELD32(0x40000000)
+#define TXINFO_W0_USB_DMA_TX_BURST	FIELD32(0x80000000)
+
+/*
+ * TX WI structure
+ */
+
+/*
+ * Word0
+ * FRAG: 1 To inform TKIP engine this is a fragment.
+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
+ * BW: Channel bandwidth 20MHz or 40 MHz
+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
+ */
+#define TXWI_W0_FRAG			FIELD32(0x00000001)
+#define TXWI_W0_MIMO_PS			FIELD32(0x00000002)
+#define TXWI_W0_CF_ACK			FIELD32(0x00000004)
+#define TXWI_W0_TS			FIELD32(0x00000008)
+#define TXWI_W0_AMPDU			FIELD32(0x00000010)
+#define TXWI_W0_MPDU_DENSITY		FIELD32(0x000000e0)
+#define TXWI_W0_TX_OP			FIELD32(0x00000300)
+#define TXWI_W0_MCS			FIELD32(0x007f0000)
+#define TXWI_W0_BW			FIELD32(0x00800000)
+#define TXWI_W0_SHORT_GI		FIELD32(0x01000000)
+#define TXWI_W0_STBC			FIELD32(0x06000000)
+#define TXWI_W0_IFS			FIELD32(0x08000000)
+#define TXWI_W0_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word1
+ */
+#define TXWI_W1_ACK			FIELD32(0x00000001)
+#define TXWI_W1_NSEQ			FIELD32(0x00000002)
+#define TXWI_W1_BW_WIN_SIZE		FIELD32(0x000000fc)
+#define TXWI_W1_WIRELESS_CLI_ID		FIELD32(0x0000ff00)
+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define TXWI_W1_PACKETID		FIELD32(0xf0000000)
+
+/*
+ * Word2
+ */
+#define TXWI_W2_IV			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ */
+#define TXWI_W3_EIV			FIELD32(0xffffffff)
+
+/*
+ * RX descriptor format for RX Ring.
+ */
+
+/*
+ * Word0
+ * UNICAST_TO_ME: This RX frame is unicast to me.
+ * MULTICAST: This is a multicast frame.
+ * BROADCAST: This is a broadcast frame.
+ * MY_BSS: this frame belongs to the same BSSID.
+ * CRC_ERROR: CRC error.
+ * CIPHER_ERROR: 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid.
+ * AMSDU: rx with 802.3 header, not 802.11 header.
+ */
+
+#define RXD_W0_BA			FIELD32(0x00000001)
+#define RXD_W0_DATA			FIELD32(0x00000002)
+#define RXD_W0_NULLDATA			FIELD32(0x00000004)
+#define RXD_W0_FRAG			FIELD32(0x00000008)
+#define RXD_W0_UNICAST_TO_ME		FIELD32(0x00000010)
+#define RXD_W0_MULTICAST		FIELD32(0x00000020)
+#define RXD_W0_BROADCAST		FIELD32(0x00000040)
+#define RXD_W0_MY_BSS			FIELD32(0x00000080)
+#define RXD_W0_CRC_ERROR		FIELD32(0x00000100)
+#define RXD_W0_CIPHER_ERROR		FIELD32(0x00000600)
+#define RXD_W0_AMSDU			FIELD32(0x00000800)
+#define RXD_W0_HTC			FIELD32(0x00001000)
+#define RXD_W0_RSSI			FIELD32(0x00002000)
+#define RXD_W0_L2PAD			FIELD32(0x00004000)
+#define RXD_W0_AMPDU			FIELD32(0x00008000)
+#define RXD_W0_DECRYPTED		FIELD32(0x00010000)
+#define RXD_W0_PLCP_RSSI		FIELD32(0x00020000)
+#define RXD_W0_CIPHER_ALG		FIELD32(0x00040000)
+#define RXD_W0_LAST_AMSDU		FIELD32(0x00080000)
+#define RXD_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
+#define RXWI_W0_BSSID			FIELD32(0x00001c00)
+#define RXWI_W0_UDF			FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define RXWI_W0_TID			FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG			FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
+#define RXWI_W1_MCS			FIELD32(0x007f0000)
+#define RXWI_W1_BW			FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
+#define RXWI_W1_STBC			FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0			FIELD32(0x000000ff)
+#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
+
+/*
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
+ */
+#define MIN_G_TXPOWER	0
+#define MIN_A_TXPOWER	-7
+#define MAX_G_TXPOWER	31
+#define MAX_A_TXPOWER	15
+#define DEFAULT_TXPOWER	5
+
+#define TXPOWER_G_FROM_DEV(__txpower) \
+	((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_G_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
+
+#define TXPOWER_A_FROM_DEV(__txpower) \
+	((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_A_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+
+#endif /* RT2800USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 84bd6f19acb..a498dde024e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -103,6 +103,15 @@
 #define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate))
 
 /*
+ * Determine the alignment requirement,
+ * to make sure the 802.11 payload is padded to a 4-byte boundrary
+ * we must determine the address of the payload and calculate the
+ * amount of bytes needed to move the data.
+ */
+#define ALIGN_SIZE(__skb, __header) \
+	(  ((unsigned long)((__skb)->data + (__header))) & 3 )
+
+/*
  * Standard timing and size defines.
  * These values should follow the ieee80211 specifications.
  */
@@ -138,6 +147,7 @@ struct rt2x00_chip {
 #define RT2561		0x0302
 #define RT2661		0x0401
 #define RT2571		0x1300
+#define RT2870		0x1600
 
 	u16 rf;
 	u32 rev;
@@ -357,6 +367,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
  *	for @tx_power_a, @tx_power_bg and @channels.
  * @channels: Device/chipset specific channel values (See &struct rf_channel).
  * @channels_info: Additional information for channels (See &struct channel_info).
+ * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap).
  */
 struct hw_mode_spec {
 	unsigned int supported_bands;
@@ -370,6 +381,8 @@ struct hw_mode_spec {
 	unsigned int num_channels;
 	const struct rf_channel *channels;
 	const struct channel_info *channels_info;
+
+	struct ieee80211_sta_ht_cap ht;
 };
 
 /*
@@ -404,6 +417,8 @@ struct rt2x00lib_erp {
 	short pifs;
 	short difs;
 	short eifs;
+
+	u16 beacon_int;
 };
 
 /*
@@ -590,6 +605,7 @@ enum rt2x00_flags {
 	DRIVER_REQUIRE_SCHEDULED,
 	DRIVER_REQUIRE_DMA,
 	DRIVER_REQUIRE_COPY_IV,
+	DRIVER_REQUIRE_L2PAD,
 
 	/*
 	 * Driver features
@@ -606,6 +622,7 @@ enum rt2x00_flags {
 	CONFIG_EXTERNAL_LNA_BG,
 	CONFIG_DOUBLE_ANTENNA,
 	CONFIG_DISABLE_LINK_TUNING,
+	CONFIG_CHANNEL_HT40,
 };
 
 /*
@@ -672,6 +689,12 @@ struct rt2x00_dev {
 	unsigned long flags;
 
 	/*
+	 * Device information, Bus IRQ and name (PCI, SoC)
+	 */
+	int irq;
+	const char *name;
+
+	/*
 	 * Chipset identification.
 	 */
 	struct rt2x00_chip chip;
@@ -772,6 +795,18 @@ struct rt2x00_dev {
 	u8 freq_offset;
 
 	/*
+	 * Calibration information (for rt2800usb & rt2800pci).
+	 * [0] -> BW20
+	 * [1] -> BW40
+	 */
+	u8 calibration[2];
+
+	/*
+	 * Beacon interval.
+	 */
+	u16 beacon_int;
+
+	/*
 	 * Low level statistics which will have
 	 * to be kept up to date while device is running.
 	 */
@@ -860,6 +895,18 @@ static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
 	rt2x00dev->chip.rev = rev;
 }
 
+static inline void rt2x00_set_chip_rt(struct rt2x00_dev *rt2x00dev,
+				      const u16 rt)
+{
+	rt2x00dev->chip.rt = rt;
+}
+
+static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev,
+				      const u16 rf, const u32 rev)
+{
+	rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev);
+}
+
 static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
 {
 	return (chipset->rt == chip);
@@ -875,11 +922,10 @@ static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset)
 	return chipset->rev;
 }
 
-static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset,
-				   const u32 rev)
+static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset,
+				    const u32 mask, const u32 rev)
 {
-	return (((chipset->rev & 0xffff0) == rev) &&
-		!!(chipset->rev & 0x0000f));
+	return ((chipset->rev & mask) == rev);
 }
 
 /**
@@ -925,9 +971,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
 				struct ieee80211_if_init_conf *conf);
 int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
-int rt2x00mac_config_interface(struct ieee80211_hw *hw,
-			       struct ieee80211_vif *vif,
-			       struct ieee80211_if_conf *conf);
 void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 				unsigned int changed_flags,
 				unsigned int *total_flags,
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 9c2f5517af2..3e019a12df2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -106,6 +106,10 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
 	}
 
 	erp.basic_rates = bss_conf->basic_rates;
+	erp.beacon_int = bss_conf->beacon_int;
+
+	/* Update global beacon interval time, this is needed for PS support */
+	rt2x00dev->beacon_int = bss_conf->beacon_int;
 
 	rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp);
 }
@@ -173,6 +177,11 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 	libconf.conf = conf;
 
 	if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) {
+		if (conf_is_ht40(conf))
+			__set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+		else
+			__clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+
 		memcpy(&libconf.rf,
 		       &rt2x00dev->spec.channels[conf->channel->hw_value],
 		       sizeof(libconf.rf));
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 0b41845d954..bc4e81e2184 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -33,7 +33,7 @@ enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
 {
 	switch (key->alg) {
 	case ALG_WEP:
-		if (key->keylen == LEN_WEP40)
+		if (key->keylen == WLAN_KEY_LEN_WEP40)
 			return CIPHER_WEP64;
 		else
 			return CIPHER_WEP128;
@@ -65,7 +65,8 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
 		__set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);
 
 	txdesc->key_idx = hw_key->hw_key_idx;
-	txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
+	txdesc->iv_offset = txdesc->header_length;
+	txdesc->iv_len = hw_key->iv_len;
 
 	if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
 		__set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);
@@ -103,47 +104,44 @@ unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
 	return overhead;
 }
 
-void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len)
+void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
 
-	if (unlikely(!iv_len))
+	if (unlikely(!txdesc->iv_len))
 		return;
 
 	/* Copy IV/EIV data */
-	memcpy(skbdesc->iv, skb->data + header_length, iv_len);
+	memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);
 }
 
-void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len)
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
 
-	if (unlikely(!iv_len))
+	if (unlikely(!txdesc->iv_len))
 		return;
 
 	/* Copy IV/EIV data */
-	memcpy(skbdesc->iv, skb->data + header_length, iv_len);
+	memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);
 
 	/* Move ieee80211 header */
-	memmove(skb->data + iv_len, skb->data, header_length);
+	memmove(skb->data + txdesc->iv_len, skb->data, txdesc->iv_offset);
 
 	/* Pull buffer to correct size */
-	skb_pull(skb, iv_len);
+	skb_pull(skb, txdesc->iv_len);
 
 	/* IV/EIV data has officially be stripped */
-	skbdesc->flags |= FRAME_DESC_IV_STRIPPED;
+	skbdesc->flags |= SKBDESC_IV_STRIPPED;
 }
 
-void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
 	const unsigned int iv_len =
 	    ((!!(skbdesc->iv[0])) * 4) + ((!!(skbdesc->iv[1])) * 4);
 
-	if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
+	if (!(skbdesc->flags & SKBDESC_IV_STRIPPED))
 		return;
 
 	skb_push(skb, iv_len);
@@ -155,14 +153,15 @@ void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
 	memcpy(skb->data + header_length, skbdesc->iv, iv_len);
 
 	/* IV/EIV data has returned into the frame */
-	skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
+	skbdesc->flags &= ~SKBDESC_IV_STRIPPED;
 }
 
-void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
 			       unsigned int header_length,
 			       struct rxdone_entry_desc *rxdesc)
 {
 	unsigned int payload_len = rxdesc->size - header_length;
+	unsigned int align = ALIGN_SIZE(skb, header_length);
 	unsigned int iv_len;
 	unsigned int icv_len;
 	unsigned int transfer = 0;
@@ -192,32 +191,48 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
 	}
 
 	/*
-	 * Make room for new data, note that we increase both
-	 * headsize and tailsize when required. The tailsize is
-	 * only needed when ICV data needs to be inserted and
-	 * the padding is smaller than the ICV data.
-	 * When alignment requirements is greater than the
-	 * ICV data we must trim the skb to the correct size
-	 * because we need to remove the extra bytes.
+	 * Make room for new data. There are 2 possibilities
+	 * either the alignment is already present between
+	 * the 802.11 header and payload. In that case we
+	 * we have to move the header less then the iv_len
+	 * since we can use the already available l2pad bytes
+	 * for the iv data.
+	 * When the alignment must be added manually we must
+	 * move the header more then iv_len since we must
+	 * make room for the payload move as well.
 	 */
-	skb_push(skb, iv_len + align);
-	if (align < icv_len)
-		skb_put(skb, icv_len - align);
-	else if (align > icv_len)
-		skb_trim(skb, rxdesc->size + iv_len + icv_len);
+	if (l2pad) {
+		skb_push(skb, iv_len - align);
+		skb_put(skb, icv_len);
 
-	/* Move ieee80211 header */
-	memmove(skb->data + transfer,
-		skb->data + transfer + iv_len + align,
-		header_length);
-	transfer += header_length;
+		/* Move ieee80211 header */
+		memmove(skb->data + transfer,
+			skb->data + transfer + (iv_len - align),
+			header_length);
+		transfer += header_length;
+	} else {
+		skb_push(skb, iv_len + align);
+		if (align < icv_len)
+			skb_put(skb, icv_len - align);
+		else if (align > icv_len)
+			skb_trim(skb, rxdesc->size + iv_len + icv_len);
+
+		/* Move ieee80211 header */
+		memmove(skb->data + transfer,
+			skb->data + transfer + iv_len + align,
+			header_length);
+		transfer += header_length;
+	}
 
 	/* Copy IV/EIV data */
 	memcpy(skb->data + transfer, rxdesc->iv, iv_len);
 	transfer += iv_len;
 
-	/* Move payload */
-	if (align) {
+	/*
+	 * Move payload for alignment purposes. Note that
+	 * this is only needed when no l2 padding is present.
+	 */
+	if (!l2pad) {
 		memmove(skb->data + transfer,
 			skb->data + transfer + align,
 			payload_len);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 5752aaae906..57813e72c80 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -227,6 +227,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
+	unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 	u8 rate_idx, rate_flags;
 
 	/*
@@ -235,13 +236,19 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
 
 	/*
+	 * Remove L2 padding which was added during
+	 */
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+		rt2x00queue_payload_align(entry->skb, true, header_length);
+
+	/*
 	 * If the IV/EIV data was stripped from the frame before it was
 	 * passed to the hardware, we should now reinsert it again because
 	 * mac80211 will expect the the same data to be present it the
 	 * frame as it was passed to us.
 	 */
 	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
-		rt2x00crypto_tx_insert_iv(entry->skb);
+		rt2x00crypto_tx_insert_iv(entry->skb, header_length);
 
 	/*
 	 * Send frame to debugfs immediately, after this call is completed
@@ -253,7 +260,8 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 * Update TX statistics.
 	 */
 	rt2x00dev->link.qual.tx_success +=
-	    test_bit(TXDONE_SUCCESS, &txdesc->flags);
+	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
 	rt2x00dev->link.qual.tx_failed +=
 	    test_bit(TXDONE_FAILURE, &txdesc->flags);
 
@@ -271,14 +279,16 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	tx_info->status.rates[1].idx = -1; /* terminate */
 
 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
-		if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
+		if (test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+				test_bit(TXDONE_UNKNOWN, &txdesc->flags))
 			tx_info->flags |= IEEE80211_TX_STAT_ACK;
 		else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
 			rt2x00dev->low_level_stats.dot11ACKFailureCount++;
 	}
 
 	if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
+		if (test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+				test_bit(TXDONE_UNKNOWN, &txdesc->flags))
 			rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
 		else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
 			rt2x00dev->low_level_stats.dot11RTSFailureCount++;
@@ -316,19 +326,54 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 
+static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
+					struct rxdone_entry_desc *rxdesc)
+{
+	struct ieee80211_supported_band *sband;
+	const struct rt2x00_rate *rate;
+	unsigned int i;
+	int signal;
+	int type;
+
+	/*
+	 * For non-HT rates the MCS value needs to contain the
+	 * actually used rate modulation (CCK or OFDM).
+	 */
+	if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
+		signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal);
+	else
+		signal = rxdesc->signal;
+
+	type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
+
+	sband = &rt2x00dev->bands[rt2x00dev->curr_band];
+	for (i = 0; i < sband->n_bitrates; i++) {
+		rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
+
+		if (((type == RXDONE_SIGNAL_PLCP) &&
+		     (rate->plcp == signal)) ||
+		    ((type == RXDONE_SIGNAL_BITRATE) &&
+		      (rate->bitrate == signal)) ||
+		    ((type == RXDONE_SIGNAL_MCS) &&
+		      (rate->mcs == signal))) {
+			return i;
+		}
+	}
+
+	WARNING(rt2x00dev, "Frame received with unrecognized signal, "
+		"signal=0x%.4x, type=%d.\n", signal, type);
+	return 0;
+}
+
 void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 		      struct queue_entry *entry)
 {
 	struct rxdone_entry_desc rxdesc;
 	struct sk_buff *skb;
 	struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
-	struct ieee80211_supported_band *sband;
-	const struct rt2x00_rate *rate;
 	unsigned int header_length;
-	unsigned int align;
-	unsigned int i;
-	int idx = -1;
-
+	bool l2pad;
+	int rate_idx;
 	/*
 	 * Allocate a new sk_buffer. If no new buffer available, drop the
 	 * received frame and reuse the existing buffer.
@@ -348,12 +393,15 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	memset(&rxdesc, 0, sizeof(rxdesc));
 	rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
 
+	/* Trim buffer to correct size */
+	skb_trim(entry->skb, rxdesc.size);
+
 	/*
 	 * The data behind the ieee80211 header must be
 	 * aligned on a 4 byte boundary.
 	 */
 	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
-	align = ((unsigned long)(entry->skb->data + header_length)) & 3;
+	l2pad = !!(rxdesc.dev_flags & RXDONE_L2PAD);
 
 	/*
 	 * Hardware might have stripped the IV/EIV/ICV data,
@@ -362,40 +410,24 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	 * in which case we should reinsert the data into the frame.
 	 */
 	if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
-	    (rxdesc.flags & RX_FLAG_IV_STRIPPED)) {
-		rt2x00crypto_rx_insert_iv(entry->skb, align,
-					  header_length, &rxdesc);
-	} else if (align) {
-		skb_push(entry->skb, align);
-		/* Move entire frame in 1 command */
-		memmove(entry->skb->data, entry->skb->data + align,
-			rxdesc.size);
-	}
-
-	/* Update data pointers, trim buffer to correct size */
-	skb_trim(entry->skb, rxdesc.size);
+	    (rxdesc.flags & RX_FLAG_IV_STRIPPED))
+		rt2x00crypto_rx_insert_iv(entry->skb, l2pad, header_length,
+					  &rxdesc);
+	else
+		rt2x00queue_payload_align(entry->skb, l2pad, header_length);
 
 	/*
-	 * Update RX statistics.
+	 * Check if the frame was received using HT. In that case,
+	 * the rate is the MCS index and should be passed to mac80211
+	 * directly. Otherwise we need to translate the signal to
+	 * the correct bitrate index.
 	 */
-	sband = &rt2x00dev->bands[rt2x00dev->curr_band];
-	for (i = 0; i < sband->n_bitrates; i++) {
-		rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
-
-		if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
-		     (rate->plcp == rxdesc.signal)) ||
-		    ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) &&
-		      (rate->bitrate == rxdesc.signal))) {
-			idx = i;
-			break;
-		}
-	}
-
-	if (idx < 0) {
-		WARNING(rt2x00dev, "Frame received with unrecognized signal,"
-			"signal=0x%.2x, type=%d.\n", rxdesc.signal,
-			(rxdesc.dev_flags & RXDONE_SIGNAL_MASK));
-		idx = 0;
+	if (rxdesc.rate_mode == RATE_MODE_CCK ||
+	    rxdesc.rate_mode == RATE_MODE_OFDM) {
+		rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
+	} else {
+		rxdesc.flags |= RX_FLAG_HT;
+		rate_idx = rxdesc.signal;
 	}
 
 	/*
@@ -405,7 +437,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
 
 	rx_status->mactime = rxdesc.timestamp;
-	rx_status->rate_idx = idx;
+	rx_status->rate_idx = rate_idx;
 	rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi);
 	rx_status->signal = rxdesc.rssi;
 	rx_status->noise = rxdesc.noise;
@@ -440,72 +472,84 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = {
 		.bitrate = 10,
 		.ratemask = BIT(0),
 		.plcp = 0x00,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 0),
 	},
 	{
 		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 		.bitrate = 20,
 		.ratemask = BIT(1),
 		.plcp = 0x01,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 1),
 	},
 	{
 		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 		.bitrate = 55,
 		.ratemask = BIT(2),
 		.plcp = 0x02,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 2),
 	},
 	{
 		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
 		.bitrate = 110,
 		.ratemask = BIT(3),
 		.plcp = 0x03,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 3),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 60,
 		.ratemask = BIT(4),
 		.plcp = 0x0b,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 0),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 90,
 		.ratemask = BIT(5),
 		.plcp = 0x0f,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 1),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 120,
 		.ratemask = BIT(6),
 		.plcp = 0x0a,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 2),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 180,
 		.ratemask = BIT(7),
 		.plcp = 0x0e,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 3),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 240,
 		.ratemask = BIT(8),
 		.plcp = 0x09,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 4),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 360,
 		.ratemask = BIT(9),
 		.plcp = 0x0d,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 5),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 480,
 		.ratemask = BIT(10),
 		.plcp = 0x08,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 6),
 	},
 	{
 		.flags = DEV_RATE_OFDM,
 		.bitrate = 540,
 		.ratemask = BIT(11),
 		.plcp = 0x0c,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 7),
 	},
 };
 
@@ -581,6 +625,8 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 		rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 		    &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
+		memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
+		       &spec->ht, sizeof(spec->ht));
 	}
 
 	/*
@@ -597,6 +643,8 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 		rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 		    &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
+		memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
+		       &spec->ht, sizeof(spec->ht));
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
new file mode 100644
index 00000000000..e3cec839e54
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -0,0 +1,69 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00lib
+	Abstract: rt2x00 HT specific routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+				   struct txentry_desc *txdesc,
+				   const struct rt2x00_rate *hwrate)
+{
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
+
+	if (tx_info->control.sta)
+		txdesc->mpdu_density =
+		    tx_info->control.sta->ht_cap.ampdu_density;
+	else
+		txdesc->mpdu_density = 0;
+
+	txdesc->ba_size = 7;	/* FIXME: What value is needed? */
+	txdesc->stbc = 0;	/* FIXME: What value is needed? */
+
+	txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs);
+	if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+		txdesc->mcs |= 0x08;
+
+	/*
+	 * Convert flags
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+		__set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags);
+
+	/*
+	 * Determine HT Mix/Greenfield rate mode
+	 */
+	if (txrate->flags & IEEE80211_TX_RC_MCS)
+		txdesc->rate_mode = RATE_MODE_HT_MIX;
+	if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
+		txdesc->rate_mode = RATE_MODE_HT_GREENFIELD;
+	if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+		__set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags);
+	if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
+		__set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags);
+}
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index a631613177d..0bf2715fa93 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -32,8 +32,8 @@
  * Interval defines
  * Both the link tuner as the rfkill will be called once per second.
  */
-#define LINK_TUNE_INTERVAL	( round_jiffies_relative(HZ) )
-#define RFKILL_POLL_INTERVAL	( 1000 )
+#define LINK_TUNE_INTERVAL	round_jiffies_relative(HZ)
+#define RFKILL_POLL_INTERVAL	1000
 
 /*
  * rt2x00_rate: Per rate device information
@@ -48,6 +48,7 @@ struct rt2x00_rate {
 	unsigned short ratemask;
 
 	unsigned short plcp;
+	unsigned short mcs;
 };
 
 extern const struct rt2x00_rate rt2x00_supported_rates[12];
@@ -57,6 +58,14 @@ static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
 	return &rt2x00_supported_rates[hw_value & 0xff];
 }
 
+#define RATE_MCS(__mode, __mcs) \
+	( (((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff) )
+
+static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
+{
+	return (mcs_value & 0x00ff);
+}
+
 /*
  * Radio control handlers.
  */
@@ -113,6 +122,23 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
+ * rt2x00queue_payload_align - Align 802.11 payload to 4-byte boundary
+ * @skb: The skb to align
+ * @l2pad: Should L2 padding be used
+ * @header_length: Length of 802.11 header
+ *
+ * This function prepares the @skb to be send to the device or mac80211.
+ * If @l2pad is set to true padding will occur between the 802.11 header
+ * and payload. Otherwise the padding will be done in front of the 802.11
+ * header.
+ * When @l2pad is set the function will check for the &SKBDESC_L2_PADDED
+ * flag in &skb_frame_desc. If that flag is set, the padding is removed
+ * and the flag cleared. Otherwise the padding is added and the flag is set.
+ */
+void rt2x00queue_payload_align(struct sk_buff *skb,
+			       bool l2pad, unsigned int header_length);
+
+/**
  * rt2x00queue_write_tx_frame - Write TX frame to hardware
  * @queue: Queue over which the frame should be send
  * @skb: The skb to send
@@ -235,7 +261,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
  * Initialize work structure and all link tuning related
- * paramters. This will not start the link tuning process itself.
+ * parameters. This will not start the link tuning process itself.
  */
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
 
@@ -295,10 +321,12 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
 				       struct txentry_desc *txdesc);
 unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
 				      struct sk_buff *skb);
-void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len);
-void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len);
-void rt2x00crypto_tx_insert_iv(struct sk_buff *skb);
-void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
+			     struct txentry_desc *txdesc);
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
+			       struct txentry_desc *txdesc);
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length);
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
 			       unsigned int header_length,
 			       struct rxdone_entry_desc *rxdesc);
 #else
@@ -319,21 +347,21 @@ static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev
 }
 
 static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
-					   unsigned int iv_len)
+					   struct txentry_desc *txdesc)
 {
 }
 
 static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
-					     unsigned int iv_len)
+					     struct txentry_desc *txdesc)
 {
 }
 
-static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb,
+					     unsigned int header_length)
 {
 }
 
-static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
-					     unsigned int align,
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
 					     unsigned int header_length,
 					     struct rxdone_entry_desc *rxdesc)
 {
@@ -341,6 +369,21 @@ static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
 #endif /* CONFIG_RT2X00_LIB_CRYPTO */
 
 /*
+ * HT handlers.
+ */
+#ifdef CONFIG_RT2X00_LIB_HT
+void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+				   struct txentry_desc *txdesc,
+				   const struct rt2x00_rate *hwrate);
+#else
+static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+						 struct txentry_desc *txdesc,
+						 const struct rt2x00_rate *hwrate)
+{
+}
+#endif /* CONFIG_RT2X00_LIB_HT */
+
+/*
  * RFkill handlers.
  */
 #ifdef CONFIG_RT2X00_LIB_RFKILL
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index 7eb5cd7e5f3..eb9b981b913 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -387,7 +387,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna)
 		rt2x00link_antenna_reset(rt2x00dev);
 }
 
-void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
+static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
 {
 	struct link_qual *qual = &rt2x00dev->link.qual;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c41a0b9e473..c4c06b4e1f0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -390,56 +390,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_config);
 
-int rt2x00mac_config_interface(struct ieee80211_hw *hw,
-			       struct ieee80211_vif *vif,
-			       struct ieee80211_if_conf *conf)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct rt2x00_intf *intf = vif_to_intf(vif);
-	int update_bssid = 0;
-	int status = 0;
-
-	/*
-	 * Mac80211 might be calling this function while we are trying
-	 * to remove the device or perhaps suspending it.
-	 */
-	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
-		return 0;
-
-	spin_lock(&intf->lock);
-
-	/*
-	 * conf->bssid can be NULL if coming from the internal
-	 * beacon update routine.
-	 */
-	if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
-		update_bssid = 1;
-		memcpy(&intf->bssid, conf->bssid, ETH_ALEN);
-	}
-
-	spin_unlock(&intf->lock);
-
-	/*
-	 * Call rt2x00_config_intf() outside of the spinlock context since
-	 * the call will sleep for USB drivers. By using the ieee80211_if_conf
-	 * values as arguments we make keep access to rt2x00_intf thread safe
-	 * even without the lock.
-	 */
-	rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
-			      update_bssid ? conf->bssid : NULL);
-
-	/*
-	 * Update the beacon.
-	 */
-	if (conf->changed & (IEEE80211_IFCC_BEACON |
-			     IEEE80211_IFCC_BEACON_ENABLED))
-		status = rt2x00queue_update_beacon(rt2x00dev, vif,
-						   conf->enable_beacon);
-
-	return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00mac_config_interface);
-
 void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 				unsigned int changed_flags,
 				unsigned int *total_flags,
@@ -623,6 +573,44 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
 	unsigned int delayed = 0;
+	int update_bssid = 0;
+
+	/*
+	 * Mac80211 might be calling this function while we are trying
+	 * to remove the device or perhaps suspending it.
+	 */
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
+	spin_lock(&intf->lock);
+
+	/*
+	 * conf->bssid can be NULL if coming from the internal
+	 * beacon update routine.
+	 */
+	if (changes & BSS_CHANGED_BSSID) {
+		update_bssid = 1;
+		memcpy(&intf->bssid, bss_conf->bssid, ETH_ALEN);
+	}
+
+	spin_unlock(&intf->lock);
+
+	/*
+	 * Call rt2x00_config_intf() outside of the spinlock context since
+	 * the call will sleep for USB drivers. By using the ieee80211_if_conf
+	 * values as arguments we make keep access to rt2x00_intf thread safe
+	 * even without the lock.
+	 */
+	if (changes & BSS_CHANGED_BSSID)
+		rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
+				      update_bssid ? bss_conf->bssid : NULL);
+
+	/*
+	 * Update the beacon.
+	 */
+	if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED))
+		rt2x00queue_update_beacon(rt2x00dev, vif,
+					  bss_conf->enable_beacon);
 
 	/*
 	 * When the association status has changed we must reset the link
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 9730b4f8fd2..cdd5154bd4c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -170,7 +170,6 @@ static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev,
 
 int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
 {
-	struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
 	struct data_queue *queue;
 	int status;
 
@@ -186,11 +185,11 @@ int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Register interrupt handler.
 	 */
-	status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler,
-			     IRQF_SHARED, pci_name(pci_dev), rt2x00dev);
+	status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
+			     IRQF_SHARED, rt2x00dev->name, rt2x00dev);
 	if (status) {
 		ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
-		      pci_dev->irq, status);
+		      rt2x00dev->irq, status);
 		goto exit;
 	}
 
@@ -270,6 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	struct ieee80211_hw *hw;
 	struct rt2x00_dev *rt2x00dev;
 	int retval;
+	u16 chip;
 
 	retval = pci_request_regions(pci_dev, pci_name(pci_dev));
 	if (retval) {
@@ -307,6 +307,14 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	rt2x00dev->dev = &pci_dev->dev;
 	rt2x00dev->ops = ops;
 	rt2x00dev->hw = hw;
+	rt2x00dev->irq = pci_dev->irq;
+	rt2x00dev->name = pci_name(pci_dev);
+
+	/*
+	 * Determine RT chipset by reading PCI header.
+	 */
+	pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
+	rt2x00_set_chip_rt(rt2x00dev, chip);
 
 	retval = rt2x00pci_alloc_reg(rt2x00dev);
 	if (retval)
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index a5664bd8493..44e5b3279ca 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -148,6 +148,35 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 	dev_kfree_skb_any(skb);
 }
 
+void rt2x00queue_payload_align(struct sk_buff *skb,
+			       bool l2pad, unsigned int header_length)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	unsigned int frame_length = skb->len;
+	unsigned int align = ALIGN_SIZE(skb, header_length);
+
+	if (!align)
+		return;
+
+	if (l2pad) {
+		if (skbdesc->flags & SKBDESC_L2_PADDED) {
+			/* Remove L2 padding */
+			memmove(skb->data + align, skb->data, header_length);
+			skb_pull(skb, align);
+			skbdesc->flags &= ~SKBDESC_L2_PADDED;
+		} else {
+			/* Add L2 padding */
+			skb_push(skb, align);
+			memmove(skb->data, skb->data + align, header_length);
+			skbdesc->flags |= SKBDESC_L2_PADDED;
+		}
+	} else {
+		/* Generic payload alignment to 4-byte boundary */
+		skb_push(skb, align);
+		memmove(skb->data, skb->data + align, frame_length);
+	}
+}
+
 static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
 						 struct txentry_desc *txdesc)
 {
@@ -259,6 +288,12 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	txdesc->aifs = entry->queue->aifs;
 
 	/*
+	 * Header and alignment information.
+	 */
+	txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+	txdesc->l2pad = ALIGN_SIZE(entry->skb, txdesc->header_length);
+
+	/*
 	 * Check whether this frame is to be acked.
 	 */
 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
@@ -326,6 +361,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	 * Apply TX descriptor handling by components
 	 */
 	rt2x00crypto_create_tx_descriptor(entry, txdesc);
+	rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate);
 	rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
 	rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
 }
@@ -368,7 +404,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
 	struct txentry_desc txdesc;
 	struct skb_frame_desc *skbdesc;
-	unsigned int iv_len = 0;
 	u8 rate_idx, rate_flags;
 
 	if (unlikely(rt2x00queue_full(queue)))
@@ -390,9 +425,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	entry->skb = skb;
 	rt2x00queue_create_tx_descriptor(entry, &txdesc);
 
-	if (IEEE80211_SKB_CB(skb)->control.hw_key != NULL)
-		iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len;
-
 	/*
 	 * All information is retrieved from the skb->cb array,
 	 * now we should claim ownership of the driver part of that
@@ -415,11 +447,15 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
 	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
 		if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags))
-			rt2x00crypto_tx_copy_iv(skb, iv_len);
+			rt2x00crypto_tx_copy_iv(skb, &txdesc);
 		else
-			rt2x00crypto_tx_remove_iv(skb, iv_len);
+			rt2x00crypto_tx_remove_iv(skb, &txdesc);
 	}
 
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &queue->rt2x00dev->flags))
+		rt2x00queue_payload_align(entry->skb, true,
+					  txdesc.header_length);
+
 	/*
 	 * It could be possible that the queue was corrupted and this
 	 * call failed. Since we always return NETDEV_TX_OK to mac80211,
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 97e2ab08f08..b5e06347c8a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -35,9 +35,12 @@
  * for USB devices this restriction does not apply, but the value of
  * 2432 makes sense since it is big enough to contain the maximum fragment
  * size according to the ieee802.11 specs.
+ * The aggregation size depends on support from the driver, but should
+ * be something around 3840 bytes.
  */
-#define DATA_FRAME_SIZE	2432
-#define MGMT_FRAME_SIZE	256
+#define DATA_FRAME_SIZE		2432
+#define MGMT_FRAME_SIZE		256
+#define AGGREGATION_SIZE	3840
 
 /**
  * DOC: Number of entries per queue
@@ -87,13 +90,16 @@ enum data_queue_qid {
  *
  * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
  * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
- * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by
+ * @SKBDESC_IV_STRIPPED: Frame contained a IV/EIV provided by
  *	mac80211 but was stripped for processing by the driver.
+ * @SKBDESC_L2_PADDED: Payload has been padded for 4-byte alignment,
+ *	the padded bytes are located between header and payload.
  */
 enum skb_frame_desc_flags {
 	SKBDESC_DMA_MAPPED_RX = 1 << 0,
 	SKBDESC_DMA_MAPPED_TX = 1 << 1,
-	FRAME_DESC_IV_STRIPPED = 1 << 2,
+	SKBDESC_IV_STRIPPED = 1 << 2,
+	SKBDESC_L2_PADDED = 1 << 3
 };
 
 /**
@@ -145,16 +151,20 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb)
  *
  * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value.
  * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value.
+ * @RXDONE_SIGNAL_MCS: Signal field contains the mcs value.
  * @RXDONE_MY_BSS: Does this frame originate from device's BSS.
  * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data.
  * @RXDONE_CRYPTO_ICV: Driver provided ICV data.
+ * @RXDONE_L2PAD: 802.11 payload has been padded to 4-byte boundary.
  */
 enum rxdone_entry_desc_flags {
-	RXDONE_SIGNAL_PLCP = 1 << 0,
-	RXDONE_SIGNAL_BITRATE = 1 << 1,
-	RXDONE_MY_BSS = 1 << 2,
-	RXDONE_CRYPTO_IV = 1 << 3,
-	RXDONE_CRYPTO_ICV = 1 << 4,
+	RXDONE_SIGNAL_PLCP = BIT(0),
+	RXDONE_SIGNAL_BITRATE = BIT(1),
+	RXDONE_SIGNAL_MCS = BIT(2),
+	RXDONE_MY_BSS = BIT(3),
+	RXDONE_CRYPTO_IV = BIT(4),
+	RXDONE_CRYPTO_ICV = BIT(5),
+	RXDONE_L2PAD = BIT(6),
 };
 
 /**
@@ -163,7 +173,7 @@ enum rxdone_entry_desc_flags {
  * from &rxdone_entry_desc to a signal value type.
  */
 #define RXDONE_SIGNAL_MASK \
-       ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE )
+	( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE | RXDONE_SIGNAL_MCS )
 
 /**
  * struct rxdone_entry_desc: RX Entry descriptor
@@ -177,6 +187,7 @@ enum rxdone_entry_desc_flags {
  * @size: Data size of the received frame.
  * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags).
  * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags).
+ * @rate_mode: Rate mode (See @enum rate_modulation).
  * @cipher: Cipher type used during decryption.
  * @cipher_status: Decryption status.
  * @iv: IV/EIV data used during decryption.
@@ -190,6 +201,7 @@ struct rxdone_entry_desc {
 	int size;
 	int flags;
 	int dev_flags;
+	u16 rate_mode;
 	u8 cipher;
 	u8 cipher_status;
 
@@ -243,6 +255,9 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared).
  * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware.
  * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware.
+ * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU.
+ * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth.
+ * @ENTRY_TXD_HT_SHORT_GI: Use short GI.
  */
 enum txentry_desc_flags {
 	ENTRY_TXD_RTS_FRAME,
@@ -258,6 +273,9 @@ enum txentry_desc_flags {
 	ENTRY_TXD_ENCRYPT_PAIRWISE,
 	ENTRY_TXD_ENCRYPT_IV,
 	ENTRY_TXD_ENCRYPT_MMIC,
+	ENTRY_TXD_HT_AMPDU,
+	ENTRY_TXD_HT_BW_40,
+	ENTRY_TXD_HT_SHORT_GI,
 };
 
 /**
@@ -267,11 +285,17 @@ enum txentry_desc_flags {
  *
  * @flags: Descriptor flags (See &enum queue_entry_flags).
  * @queue: Queue identification (See &enum data_queue_qid).
+ * @header_length: Length of 802.11 header.
+ * @l2pad: Amount of padding to align 802.11 payload to 4-byte boundrary.
  * @length_high: PLCP length high word.
  * @length_low: PLCP length low word.
  * @signal: PLCP signal.
  * @service: PLCP service.
+ * @msc: MCS.
+ * @stbc: STBC.
+ * @ba_size: BA size.
  * @rate_mode: Rate mode (See @enum rate_modulation).
+ * @mpdu_density: MDPU density.
  * @retry_limit: Max number of retries.
  * @aifs: AIFS value.
  * @ifs: IFS value.
@@ -280,18 +304,26 @@ enum txentry_desc_flags {
  * @cipher: Cipher type used for encryption.
  * @key_idx: Key index used for encryption.
  * @iv_offset: Position where IV should be inserted by hardware.
+ * @iv_len: Length of IV data.
  */
 struct txentry_desc {
 	unsigned long flags;
 
 	enum data_queue_qid queue;
 
+	u16 header_length;
+	u16 l2pad;
+
 	u16 length_high;
 	u16 length_low;
 	u16 signal;
 	u16 service;
 
+	u16 mcs;
+	u16 stbc;
+	u16 ba_size;
 	u16 rate_mode;
+	u16 mpdu_density;
 
 	short retry_limit;
 	short aifs;
@@ -302,6 +334,7 @@ struct txentry_desc {
 	enum cipher cipher;
 	u16 key_idx;
 	u16 iv_offset;
+	u16 iv_len;
 };
 
 /**
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 2ca8b7a9722..49b29ff90c4 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -603,15 +603,22 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
 	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 			   !!erp->short_preamble);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates);
 
+	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
 	rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, erp->slot_time);
 	rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
@@ -938,25 +945,6 @@ static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 }
 
-static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
-				    struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
-
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
-			   libconf->conf->beacon_int * 16);
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
-}
-
 static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -968,7 +956,7 @@ static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2x00pci_register_read(rt2x00dev, MAC_CSR11, &reg);
 		rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN,
-				   libconf->conf->beacon_int - 10);
+				   rt2x00dev->beacon_int - 10);
 		rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 		rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 5);
@@ -1016,8 +1004,6 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
 		rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt61pci_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt61pci_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt61pci_config_ps(rt2x00dev, libconf);
 }
@@ -2308,7 +2294,6 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	u32 reg;
 	u16 value;
 	u16 eeprom;
-	u16 device;
 
 	/*
 	 * Read EEPROM word for configuration.
@@ -2317,14 +2302,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 
 	/*
 	 * Identify RF chipset.
-	 * To determine the RT chip we have to read the
-	 * PCI header of the device.
 	 */
-	pci_read_config_word(to_pci_dev(rt2x00dev->dev),
-			     PCI_CONFIG_HEADER_DEVICE, &device);
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, device, value, reg);
+	rt2x00_set_chip_rf(rt2x00dev, value, reg);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
@@ -2740,7 +2721,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.set_key		= rt2x00mac_set_key,
 	.get_stats		= rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 41e8959919f..6c71f77c816 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -63,12 +63,6 @@
  */
 
 /*
- * PCI Configuration Header
- */
-#define PCI_CONFIG_HEADER_VENDOR	0x0000
-#define PCI_CONFIG_HEADER_DEVICE	0x0002
-
-/*
  * HOST_CMD_CSR: For HOST to interrupt embedded processor
  */
 #define HOST_CMD_CSR			0x0008
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 853b2b279b6..c18848836f2 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -566,15 +566,22 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 	rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
+	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 
 	rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 			   !!erp->short_preamble);
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates);
 
+	rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
+	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+
 	rt2x00usb_register_read(rt2x00dev, MAC_CSR9, &reg);
 	rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, erp->slot_time);
 	rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg);
@@ -834,25 +841,6 @@ static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 }
 
-static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
-				    struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
-	rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
-	rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
-			   libconf->conf->beacon_int * 16);
-	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
-}
-
 static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev,
 				struct rt2x00lib_conf *libconf)
 {
@@ -864,7 +852,7 @@ static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev,
 	if (state == STATE_SLEEP) {
 		rt2x00usb_register_read(rt2x00dev, MAC_CSR11, &reg);
 		rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN,
-				   libconf->conf->beacon_int - 10);
+				   rt2x00dev->beacon_int - 10);
 		rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP,
 				   libconf->conf->listen_interval - 1);
 		rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 5);
@@ -906,8 +894,6 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
 		rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt73usb_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		rt73usb_config_duration(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
 		rt73usb_config_ps(rt2x00dev, libconf);
 }
@@ -1846,7 +1832,8 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) ||
+	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2259,7 +2246,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.add_interface		= rt2x00mac_add_interface,
 	.remove_interface	= rt2x00mac_remove_interface,
 	.config			= rt2x00mac_config,
-	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
 	.set_key		= rt2x00mac_set_key,
 	.get_stats		= rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rtl818x/Makefile b/drivers/net/wireless/rtl818x/Makefile
index c113b3e6904..37e3d4db0c4 100644
--- a/drivers/net/wireless/rtl818x/Makefile
+++ b/drivers/net/wireless/rtl818x/Makefile
@@ -1,5 +1,5 @@
 rtl8180-objs		:= rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o
-rtl8187-objs		:= rtl8187_dev.o rtl8187_rtl8225.o
+rtl8187-objs		:= rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o
 
 obj-$(CONFIG_RTL8180)	+= rtl8180.o
 obj-$(CONFIG_RTL8187)	+= rtl8187.o
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 387c133ec0f..7e65d7c3180 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -702,30 +702,26 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
-static int rtl8180_config_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int i;
-
-	for (i = 0; i < ETH_ALEN; i++)
-		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
-
-	if (is_valid_ether_addr(conf->bssid))
-		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
-	else
-		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
-
-	return 0;
-}
-
 static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 				     struct ieee80211_vif *vif,
 				     struct ieee80211_bss_conf *info,
 				     u32 changed)
 {
 	struct rtl8180_priv *priv = dev->priv;
+	int i;
+
+	if (changed & BSS_CHANGED_BSSID) {
+		for (i = 0; i < ETH_ALEN; i++)
+			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
+					 info->bssid[i]);
+
+		if (is_valid_ether_addr(info->bssid))
+			rtl818x_iowrite8(priv, &priv->map->MSR,
+					 RTL818X_MSR_INFRA);
+		else
+			rtl818x_iowrite8(priv, &priv->map->MSR,
+					 RTL818X_MSR_NO_LINK);
+	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
 	        priv->rf->conf_erp(dev, info);
@@ -770,7 +766,6 @@ static const struct ieee80211_ops rtl8180_ops = {
 	.add_interface		= rtl8180_add_interface,
 	.remove_interface	= rtl8180_remove_interface,
 	.config			= rtl8180_config,
-	.config_interface	= rtl8180_config_interface,
 	.bss_info_changed	= rtl8180_bss_info_changed,
 	.configure_filter	= rtl8180_configure_filter,
 };
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index edeff82a4d0..c09bfefc70f 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -16,6 +16,7 @@
 #define RTL8187_H
 
 #include "rtl818x.h"
+#include "rtl8187_leds.h"
 
 #define RTL8187_EEPROM_TXPWR_BASE	0x05
 #define RTL8187_EEPROM_MAC_ADDR		0x07
@@ -102,6 +103,12 @@ struct rtl8187_priv {
 	struct usb_anchor anchored;
 	struct delayed_work work;
 	struct ieee80211_hw *dev;
+#ifdef CONFIG_RTL8187_LEDS
+	struct rtl8187_led led_tx;
+	struct rtl8187_led led_rx;
+	struct delayed_work led_on;
+	struct delayed_work led_off;
+#endif
 	u16 txpwr_base;
 	u8 asic_rev;
 	u8 is_rtl8187b;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index d51ba0a88c2..294250e294d 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -29,6 +29,9 @@
 
 #include "rtl8187.h"
 #include "rtl8187_rtl8225.h"
+#ifdef CONFIG_RTL8187_LEDS
+#include "rtl8187_leds.h"
+#endif
 
 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
@@ -320,12 +323,7 @@ static void rtl8187_rx_cb(struct urb *urb)
 	unsigned long f;
 
 	spin_lock_irqsave(&priv->rx_queue.lock, f);
-	if (skb->next)
-		__skb_unlink(skb, &priv->rx_queue);
-	else {
-		spin_unlock_irqrestore(&priv->rx_queue.lock, f);
-		return;
-	}
+	__skb_unlink(skb, &priv->rx_queue);
 	spin_unlock_irqrestore(&priv->rx_queue.lock, f);
 	skb_put(skb, urb->actual_length);
 
@@ -736,10 +734,10 @@ static const u8 rtl8187b_reg_table[][3] = {
 	{0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0},
 	{0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0},
 	{0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0},
-	{0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x91, 0x03, 0},
+	{0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x4C, 0x00, 2},
 
-	{0x4C, 0x00, 2}, {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0},
-	{0x8E, 0x08, 0}, {0x8F, 0x00, 0}
+	{0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0},
+	{0x8F, 0x00, 0}
 };
 
 static int rtl8187b_init_hw(struct ieee80211_hw *dev)
@@ -1089,32 +1087,6 @@ static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
-static int rtl8187_config_interface(struct ieee80211_hw *dev,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_if_conf *conf)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int i;
-	u8 reg;
-
-	mutex_lock(&priv->conf_mutex);
-	for (i = 0; i < ETH_ALEN; i++)
-		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
-
-	if (is_valid_ether_addr(conf->bssid)) {
-		reg = RTL818X_MSR_INFRA;
-		if (priv->is_rtl8187b)
-			reg |= RTL818X_MSR_ENEDCA;
-		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
-	} else {
-		reg = RTL818X_MSR_NO_LINK;
-		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
-	}
-
-	mutex_unlock(&priv->conf_mutex);
-	return 0;
-}
-
 /*
  * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for
  * example. Thus we have to use raw values for AC_*_PARAM register addresses.
@@ -1192,6 +1164,27 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
 				     u32 changed)
 {
 	struct rtl8187_priv *priv = dev->priv;
+	int i;
+	u8 reg;
+
+	if (changed & BSS_CHANGED_BSSID) {
+		mutex_lock(&priv->conf_mutex);
+		for (i = 0; i < ETH_ALEN; i++)
+			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
+					 info->bssid[i]);
+
+		if (is_valid_ether_addr(info->bssid)) {
+			reg = RTL818X_MSR_INFRA;
+			if (priv->is_rtl8187b)
+				reg |= RTL818X_MSR_ENEDCA;
+			rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+		} else {
+			reg = RTL818X_MSR_NO_LINK;
+			rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+		}
+
+		mutex_unlock(&priv->conf_mutex);
+	}
 
 	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
 		rtl8187_conf_erp(priv, info->use_short_slot,
@@ -1273,7 +1266,6 @@ static const struct ieee80211_ops rtl8187_ops = {
 	.add_interface		= rtl8187_add_interface,
 	.remove_interface	= rtl8187_remove_interface,
 	.config			= rtl8187_config,
-	.config_interface	= rtl8187_config_interface,
 	.bss_info_changed	= rtl8187_bss_info_changed,
 	.configure_filter	= rtl8187_configure_filter,
 	.conf_tx		= rtl8187_conf_tx
@@ -1480,9 +1472,6 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		(*channel++).hw_value = txpwr >> 8;
 	}
 
-	if (priv->is_rtl8187b)
-		printk(KERN_WARNING "rtl8187: 8187B chip detected.\n");
-
 	/*
 	 * XXX: Once this driver supports anything that requires
 	 *	beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ.
@@ -1514,6 +1503,12 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	       wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
 	       chip_name, priv->asic_rev, priv->rf->name);
 
+#ifdef CONFIG_RTL8187_LEDS
+	eeprom_93cx6_read(&eeprom, 0x3F, &reg);
+	reg &= 0xFF;
+	rtl8187_leds_init(dev, reg);
+#endif
+
 	return 0;
 
  err_free_dmabuf:
@@ -1533,6 +1528,9 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
 	if (!dev)
 		return;
 
+#ifdef CONFIG_RTL8187_LEDS
+	rtl8187_leds_exit(dev);
+#endif
 	ieee80211_unregister_hw(dev);
 
 	priv = dev->priv;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
new file mode 100644
index 00000000000..b4425359224
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -0,0 +1,218 @@
+/*
+ * Linux LED driver for RTL8187
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Based on the LED handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifdef CONFIG_RTL8187_LEDS
+
+#include <net/mac80211.h>
+#include <linux/usb.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rtl8187.h"
+#include "rtl8187_leds.h"
+
+static void led_turn_on(struct work_struct *work)
+{
+	/* As this routine does read/write operations on the hardware, it must
+	 * be run from a work queue.
+	 */
+	u8 reg;
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    led_on.work);
+	struct rtl8187_led *led = &priv->led_tx;
+
+	/* Don't change the LED, when the device is down. */
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	/* Skip if the LED is not registered. */
+	if (!led->dev)
+		return;
+	mutex_lock(&priv->conf_mutex);
+	switch (led->ledpin) {
+	case LED_PIN_GPIO0:
+		rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
+		break;
+	case LED_PIN_LED0:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_LED1:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_HW:
+	default:
+		break;
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+static void led_turn_off(struct work_struct *work)
+{
+	/* As this routine does read/write operations on the hardware, it must
+	 * be run from a work queue.
+	 */
+	u8 reg;
+	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+				    led_off.work);
+	struct rtl8187_led *led = &priv->led_tx;
+
+	/* Don't change the LED, when the device is down. */
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		return ;
+
+	/* Skip if the LED is not registered. */
+	if (!led->dev)
+		return;
+	mutex_lock(&priv->conf_mutex);
+	switch (led->ledpin) {
+	case LED_PIN_GPIO0:
+		rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01);
+		rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
+		break;
+	case LED_PIN_LED0:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_LED1:
+		reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
+		rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
+		break;
+	case LED_PIN_HW:
+	default:
+		break;
+	}
+	mutex_unlock(&priv->conf_mutex);
+}
+
+/* Callback from the LED subsystem. */
+static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
+				   enum led_brightness brightness)
+{
+	struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
+					       led_dev);
+	struct ieee80211_hw *hw = led->dev;
+	struct rtl8187_priv *priv = hw->priv;
+
+	if (brightness == LED_OFF) {
+		queue_delayed_work(hw->workqueue, &priv->led_off, 0);
+		/* The LED is off for 1/20 sec so that it just blinks. */
+		queue_delayed_work(hw->workqueue, &priv->led_on, HZ / 20);
+	} else
+		queue_delayed_work(hw->workqueue, &priv->led_on, 0);
+}
+
+static int rtl8187_register_led(struct ieee80211_hw *dev,
+				struct rtl8187_led *led, const char *name,
+				const char *default_trigger, u8 ledpin)
+{
+	int err;
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (led->dev)
+		return -EEXIST;
+	if (!default_trigger)
+		return -EINVAL;
+	led->dev = dev;
+	led->ledpin = ledpin;
+	strncpy(led->name, name, sizeof(led->name));
+
+	led->led_dev.name = led->name;
+	led->led_dev.default_trigger = default_trigger;
+	led->led_dev.brightness_set = rtl8187_led_brightness_set;
+
+	err = led_classdev_register(&priv->udev->dev, &led->led_dev);
+	if (err) {
+		printk(KERN_INFO "LEDs: Failed to register %s\n", name);
+		led->dev = NULL;
+		return err;
+	}
+	return 0;
+}
+
+static void rtl8187_unregister_led(struct rtl8187_led *led)
+{
+	led_classdev_unregister(&led->led_dev);
+	led->dev = NULL;
+}
+
+void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	char name[RTL8187_LED_MAX_NAME_LEN + 1];
+	u8 ledpin;
+	int err;
+
+	/* According to the vendor driver, the LED operation depends on the
+	 * customer ID encoded in the EEPROM
+	 */
+	printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
+	switch (custid) {
+	case EEPROM_CID_RSVD0:
+	case EEPROM_CID_RSVD1:
+	case EEPROM_CID_SERCOMM_PS:
+	case EEPROM_CID_QMI:
+	case EEPROM_CID_DELL:
+	case EEPROM_CID_TOSHIBA:
+		ledpin = LED_PIN_GPIO0;
+		break;
+	case EEPROM_CID_ALPHA0:
+		ledpin = LED_PIN_LED0;
+		break;
+	case EEPROM_CID_HW:
+		ledpin = LED_PIN_HW;
+		break;
+	default:
+		ledpin = LED_PIN_GPIO0;
+	}
+
+	INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
+	INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
+
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::tx", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_tx, name,
+			 ieee80211_get_tx_led_name(dev), ledpin);
+	if (err)
+		goto error;
+	snprintf(name, sizeof(name),
+		 "rtl8187-%s::rx", wiphy_name(dev->wiphy));
+	err = rtl8187_register_led(dev, &priv->led_rx, name,
+			 ieee80211_get_rx_led_name(dev), ledpin);
+	if (!err) {
+		queue_delayed_work(dev->workqueue, &priv->led_on, 0);
+		return;
+	}
+	/* registration of RX LED failed - unregister TX */
+	rtl8187_unregister_led(&priv->led_tx);
+error:
+	/* If registration of either failed, cancel delayed work */
+	cancel_delayed_work_sync(&priv->led_off);
+	cancel_delayed_work_sync(&priv->led_on);
+}
+
+void rtl8187_leds_exit(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	rtl8187_unregister_led(&priv->led_tx);
+	/* turn the LED off before exiting */
+	queue_delayed_work(dev->workqueue, &priv->led_off, 0);
+	cancel_delayed_work_sync(&priv->led_off);
+	rtl8187_unregister_led(&priv->led_rx);
+}
+#endif /* def CONFIG_RTL8187_LED */
+
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.h b/drivers/net/wireless/rtl818x/rtl8187_leds.h
new file mode 100644
index 00000000000..a0332027aea
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.h
@@ -0,0 +1,57 @@
+/*
+ * Definitions for RTL8187 leds
+ *
+ * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ * Based on the LED handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_LED_H
+#define RTL8187_LED_H
+
+#ifdef CONFIG_RTL8187_LEDS
+
+#define RTL8187_LED_MAX_NAME_LEN	21
+
+#include <linux/leds.h>
+#include <linux/types.h>
+
+enum {
+	LED_PIN_LED0,
+	LED_PIN_LED1,
+	LED_PIN_GPIO0,
+	LED_PIN_HW
+};
+
+enum {
+	EEPROM_CID_RSVD0 = 0x00,
+	EEPROM_CID_RSVD1 = 0xFF,
+	EEPROM_CID_ALPHA0 = 0x01,
+	EEPROM_CID_SERCOMM_PS = 0x02,
+	EEPROM_CID_HW = 0x03,
+	EEPROM_CID_TOSHIBA = 0x04,
+	EEPROM_CID_QMI = 0x07,
+	EEPROM_CID_DELL = 0x08
+};
+
+struct rtl8187_led {
+	struct ieee80211_hw *dev;
+	/* The LED class device */
+	struct led_classdev led_dev;
+	/* The pin/method used to control the led */
+	u8 ledpin;
+	/* The unique name string for this LED device. */
+	char name[RTL8187_LED_MAX_NAME_LEN + 1];
+};
+
+void rtl8187_leds_init(struct ieee80211_hw *dev, u16 code);
+void rtl8187_leds_exit(struct ieee80211_hw *dev);
+
+#endif /* def CONFIG_RTL8187_LED */
+
+#endif /* RTL8187_LED_H */
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index f9520463269..38366a56b71 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -1540,7 +1540,7 @@ static int strip_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!netif_running(dev)) {
 		printk(KERN_ERR "%s: xmit call when iface is down\n",
 		       dev->name);
-		return (1);
+		return NETDEV_TX_BUSY;
 	}
 
 	netif_stop_queue(dev);
@@ -2509,7 +2509,7 @@ static void strip_dev_setup(struct net_device *dev)
 	 *  netdev_priv(dev) Already holds a pointer to our struct strip
 	 */
 
-	*(MetricomAddress *) & dev->broadcast = broadcast_address;
+	*(MetricomAddress *)dev->broadcast = broadcast_address;
 	dev->dev_addr[0] = 0;
 	dev->addr_len = sizeof(MetricomAddress);
 
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index 3ab3eb95718..ab7fc5c0c8b 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -2867,12 +2867,8 @@ static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev)
 		spin_unlock_irqrestore(&lp->spinlock, flags);
 		/* Check that we can continue */
 		if (lp->tx_n_in_use == (NTXBLOCKS - 1))
-			return 1;
+			return NETDEV_TX_BUSY;
 	}
-#ifdef DEBUG_TX_ERROR
-	if (skb->next)
-		printk(KERN_INFO "skb has next\n");
-#endif
 
 	/* Do we need some padding? */
 	/* Note : on wireless the propagation time is in the order of 1us,
@@ -2884,10 +2880,10 @@ static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev)
 		skb_copy_from_linear_data(skb, data, skb->len);
 		/* Write packet on the card */
 		if(wv_packet_write(dev, data, ETH_ZLEN))
-			return 1;	/* We failed */
+			return NETDEV_TX_BUSY;	/* We failed */
 	}
 	else if(wv_packet_write(dev, skb->data, skb->len))
-		return 1;	/* We failed */
+		return NETDEV_TX_BUSY;	/* We failed */
 
 
 	dev_kfree_skb(skb);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index e55b33961ae..6af706408ac 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -138,7 +138,7 @@ psa_read(struct net_device *	dev,
 
 /*------------------------------------------------------------------*/
 /*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
  */
 static void
 psa_write(struct net_device *	dev,
@@ -3107,11 +3107,6 @@ wavelan_packet_xmit(struct sk_buff *	skb,
        * so the Tx buffer is now free */
     }
 
-#ifdef DEBUG_TX_ERROR
-	if (skb->next)
-		printk(KERN_INFO "skb has next\n");
-#endif
-
 	/* Check if we need some padding */
 	/* Note : on wireless the propagation time is in the order of 1us,
 	 * and we don't have the Ethernet specific requirement of beeing
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
new file mode 100644
index 00000000000..a82c4cd436d
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -0,0 +1,11 @@
+config WL12XX
+	tristate "TI wl1251/wl1271 support"
+	depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS && EXPERIMENTAL
+	select FW_LOADER
+	select CRC7
+	---help---
+	  This module adds support for wireless adapters based on
+	  TI wl1251/wl1271 chipsets.
+
+	  If you choose to build a module, it'll be called wl12xx. Say N if
+	  unsure.
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
new file mode 100644
index 00000000000..d43de27dc54
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -0,0 +1,4 @@
+wl12xx-objs		= main.o spi.o event.o tx.o rx.o \
+			  ps.o cmd.o acx.o boot.o init.o wl1251.o \
+			  debugfs.o
+obj-$(CONFIG_WL12XX)	+= wl12xx.o
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
new file mode 100644
index 00000000000..1cfd458ad5a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -0,0 +1,689 @@
+#include "acx.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
+			   u8 mgt_rate, u8 mgt_mod)
+{
+	int ret;
+	struct acx_fw_gen_frame_rates rates;
+
+	wl12xx_debug(DEBUG_ACX, "acx frame rates");
+
+	rates.header.id = ACX_FW_GEN_FRAME_RATES;
+	rates.header.len = sizeof(struct acx_fw_gen_frame_rates) -
+		sizeof(struct acx_header);
+
+	rates.tx_ctrl_frame_rate = ctrl_rate;
+	rates.tx_ctrl_frame_mod = ctrl_mod;
+	rates.tx_mgt_frame_rate = mgt_rate;
+	rates.tx_mgt_frame_mod = mgt_mod;
+
+	ret = wl12xx_cmd_configure(wl, &rates, sizeof(rates));
+	if (ret < 0) {
+		wl12xx_error("Failed to set FW rates and modulation");
+		return ret;
+	}
+
+	return 0;
+}
+
+
+int wl12xx_acx_station_id(struct wl12xx *wl)
+{
+	int ret, i;
+	struct dot11_station_id mac;
+
+	wl12xx_debug(DEBUG_ACX, "acx dot11_station_id");
+
+	mac.header.id = DOT11_STATION_ID;
+	mac.header.len = sizeof(mac) - sizeof(struct acx_header);
+
+	for (i = 0; i < ETH_ALEN; i++)
+		mac.mac[i] = wl->mac_addr[ETH_ALEN - 1 - i];
+
+	ret = wl12xx_cmd_configure(wl, &mac, sizeof(mac));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id)
+{
+	struct acx_dot11_default_key default_key;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx dot11_default_key (%d)", key_id);
+
+	default_key.header.id = DOT11_DEFAULT_KEY;
+	default_key.header.len = sizeof(default_key) -
+		sizeof(struct acx_header);
+
+	default_key.id = key_id;
+
+	ret = wl12xx_cmd_configure(wl, &default_key, sizeof(default_key));
+	if (ret < 0) {
+		wl12xx_error("Couldnt set default key");
+		return ret;
+	}
+
+	wl->default_key = key_id;
+
+	return 0;
+}
+
+int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval)
+{
+	struct acx_wake_up_condition wake_up;
+
+	wl12xx_debug(DEBUG_ACX, "acx wake up conditions");
+
+	wake_up.header.id = ACX_WAKE_UP_CONDITIONS;
+	wake_up.header.len = sizeof(wake_up) - sizeof(struct acx_header);
+
+	wake_up.wake_up_event = WAKE_UP_EVENT_DTIM_BITMAP;
+	wake_up.listen_interval = listen_interval;
+
+	return wl12xx_cmd_configure(wl, &wake_up, sizeof(wake_up));
+}
+
+int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth)
+{
+	int ret;
+	struct acx_sleep_auth auth;
+
+	wl12xx_debug(DEBUG_ACX, "acx sleep auth");
+
+	auth.header.id = ACX_SLEEP_AUTH;
+	auth.header.len = sizeof(auth) - sizeof(struct acx_header);
+
+	auth.sleep_auth = sleep_auth;
+
+	ret = wl12xx_cmd_configure(wl, &auth, sizeof(auth));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len)
+{
+	struct wl12xx_command cmd;
+	struct acx_revision *rev;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx fw rev");
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	ret = wl12xx_cmd_interrogate(wl, ACX_FW_REV, sizeof(*rev), &cmd);
+	if (ret < 0) {
+		wl12xx_warning("ACX_FW_REV interrogate failed");
+		return ret;
+	}
+
+	rev = (struct acx_revision *) &cmd.parameters;
+
+	/* be careful with the buffer sizes */
+	strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
+
+	/*
+	 * if the firmware version string is exactly
+	 * sizeof(rev->fw_version) long or fw_len is less than
+	 * sizeof(rev->fw_version) it won't be null terminated
+	 */
+	buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
+
+	return 0;
+}
+
+int wl12xx_acx_tx_power(struct wl12xx *wl, int power)
+{
+	struct acx_current_tx_power ie;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr");
+
+	if (power < 0 || power > 25)
+		return -EINVAL;
+
+	memset(&ie, 0, sizeof(ie));
+
+	ie.header.id = DOT11_CUR_TX_PWR;
+	ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+	ie.current_tx_power = power * 10;
+
+	ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+	if (ret < 0) {
+		wl12xx_warning("configure of tx power failed: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_feature_cfg(struct wl12xx *wl)
+{
+	struct acx_feature_config feature;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx feature cfg");
+
+	memset(&feature, 0, sizeof(feature));
+
+	feature.header.id = ACX_FEATURE_CFG;
+	feature.header.len = sizeof(feature) - sizeof(struct acx_header);
+
+	/* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */
+	feature.data_flow_options = 0;
+	feature.options = 0;
+
+	ret = wl12xx_cmd_configure(wl, &feature, sizeof(feature));
+	if (ret < 0)
+		wl12xx_error("Couldnt set HW encryption");
+
+	return ret;
+}
+
+int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len)
+{
+	struct wl12xx_command cmd;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx mem map");
+
+	ret = wl12xx_cmd_interrogate(wl, ACX_MEM_MAP, len, &cmd);
+	if (ret < 0)
+		return ret;
+	else if (cmd.status != CMD_STATUS_SUCCESS)
+		return -EIO;
+
+	memcpy(mem_map, &cmd.parameters, len);
+
+	return 0;
+}
+
+int wl12xx_acx_data_path_params(struct wl12xx *wl,
+				struct acx_data_path_params_resp *data_path)
+{
+	struct acx_data_path_params params;
+	struct wl12xx_command cmd;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx data path params");
+
+	params.rx_packet_ring_chunk_size = DP_RX_PACKET_RING_CHUNK_SIZE;
+	params.tx_packet_ring_chunk_size = DP_TX_PACKET_RING_CHUNK_SIZE;
+
+	params.rx_packet_ring_chunk_num = DP_RX_PACKET_RING_CHUNK_NUM;
+	params.tx_packet_ring_chunk_num = DP_TX_PACKET_RING_CHUNK_NUM;
+
+	params.tx_complete_threshold = 1;
+
+	params.tx_complete_ring_depth = FW_TX_CMPLT_BLOCK_SIZE;
+
+	params.tx_complete_timeout = DP_TX_COMPLETE_TIME_OUT;
+
+	params.header.id = ACX_DATA_PATH_PARAMS;
+	params.header.len = sizeof(params) - sizeof(struct acx_header);
+
+	ret = wl12xx_cmd_configure(wl, &params, sizeof(params));
+	if (ret < 0)
+		return ret;
+
+
+	ret = wl12xx_cmd_interrogate(wl, ACX_DATA_PATH_PARAMS,
+				     sizeof(struct acx_data_path_params_resp),
+				     &cmd);
+
+	if (ret < 0) {
+		wl12xx_warning("failed to read data path parameters: %d", ret);
+		return ret;
+	} else if (cmd.status != CMD_STATUS_SUCCESS) {
+		wl12xx_warning("data path parameter acx status failed");
+		return -EIO;
+	}
+
+	memcpy(data_path, &cmd.parameters, sizeof(*data_path));
+
+	return 0;
+}
+
+int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time)
+{
+	struct rx_msdu_lifetime msdu_lifetime;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx rx msdu life time");
+
+	msdu_lifetime.header.id = DOT11_RX_MSDU_LIFE_TIME;
+	msdu_lifetime.header.len = sizeof(msdu_lifetime) -
+		sizeof(struct acx_header);
+	msdu_lifetime.lifetime = life_time;
+
+	ret = wl12xx_cmd_configure(wl, &msdu_lifetime, sizeof(msdu_lifetime));
+	if (ret < 0) {
+		wl12xx_warning("failed to set rx msdu life time: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter)
+{
+	struct acx_rx_config rx_config;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx rx config");
+
+	rx_config.header.id = ACX_RX_CFG;
+	rx_config.header.len = sizeof(rx_config) - sizeof(struct acx_header);
+	rx_config.config_options = config;
+	rx_config.filter_options = filter;
+
+	ret = wl12xx_cmd_configure(wl, &rx_config, sizeof(rx_config));
+	if (ret < 0) {
+		wl12xx_warning("failed to set rx config: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_pd_threshold(struct wl12xx *wl)
+{
+	struct acx_packet_detection packet_detection;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx data pd threshold");
+
+	/* FIXME: threshold value not set */
+	packet_detection.header.id = ACX_PD_THRESHOLD;
+	packet_detection.header.len = sizeof(packet_detection) -
+		sizeof(struct acx_header);
+
+	ret = wl12xx_cmd_configure(wl, &packet_detection,
+				   sizeof(packet_detection));
+	if (ret < 0) {
+		wl12xx_warning("failed to set pd threshold: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time)
+{
+	struct acx_slot slot;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx slot");
+
+	slot.header.id = ACX_SLOT;
+	slot.header.len = sizeof(slot) - sizeof(struct acx_header);
+
+	slot.wone_index = STATION_WONE_INDEX;
+	slot.slot_time = slot_time;
+
+	ret = wl12xx_cmd_configure(wl, &slot, sizeof(slot));
+	if (ret < 0) {
+		wl12xx_warning("failed to set slot time: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_group_address_tbl(struct wl12xx *wl)
+{
+	struct multicast_grp_addr_start multicast;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx group address tbl");
+
+	/* MAC filtering */
+	multicast.header.id = DOT11_GROUP_ADDRESS_TBL;
+	multicast.header.len = sizeof(multicast) - sizeof(struct acx_header);
+
+	multicast.enabled = 0;
+	multicast.num_groups = 0;
+	memset(multicast.mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+
+	ret = wl12xx_cmd_configure(wl, &multicast, sizeof(multicast));
+	if (ret < 0) {
+		wl12xx_warning("failed to set group addr table: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_service_period_timeout(struct wl12xx *wl)
+{
+	struct acx_rx_timeout rx_timeout;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx service period timeout");
+
+	/* RX timeout */
+	rx_timeout.header.id = ACX_SERVICE_PERIOD_TIMEOUT;
+	rx_timeout.header.len = sizeof(rx_timeout) - sizeof(struct acx_header);
+
+	rx_timeout.ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
+	rx_timeout.upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+
+	ret = wl12xx_cmd_configure(wl, &rx_timeout, sizeof(rx_timeout));
+	if (ret < 0) {
+		wl12xx_warning("failed to set service period timeout: %d",
+			       ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold)
+{
+	struct acx_rts_threshold rts;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx rts threshold");
+
+	rts.header.id = DOT11_RTS_THRESHOLD;
+	rts.header.len = sizeof(rts) - sizeof(struct acx_header);
+
+	rts.threshold = rts_threshold;
+
+	ret = wl12xx_cmd_configure(wl, &rts, sizeof(rts));
+	if (ret < 0) {
+		wl12xx_warning("failed to set rts threshold: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl)
+{
+	struct acx_beacon_filter_option beacon_filter;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx beacon filter opt");
+
+	beacon_filter.header.id = ACX_BEACON_FILTER_OPT;
+	beacon_filter.header.len = sizeof(beacon_filter) -
+		sizeof(struct acx_header);
+
+	beacon_filter.enable = 0;
+	beacon_filter.max_num_beacons = 0;
+
+	ret = wl12xx_cmd_configure(wl, &beacon_filter, sizeof(beacon_filter));
+	if (ret < 0) {
+		wl12xx_warning("failed to set beacon filter opt: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_beacon_filter_table(struct wl12xx *wl)
+{
+	struct acx_beacon_filter_ie_table ie_table;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx beacon filter table");
+
+	ie_table.header.id = ACX_BEACON_FILTER_TABLE;
+	ie_table.header.len = sizeof(ie_table) - sizeof(struct acx_header);
+
+	ie_table.num_ie = 0;
+	memset(ie_table.table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+
+	ret = wl12xx_cmd_configure(wl, &ie_table, sizeof(ie_table));
+	if (ret < 0) {
+		wl12xx_warning("failed to set beacon filter table: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_sg_enable(struct wl12xx *wl)
+{
+	struct acx_bt_wlan_coex pta;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx sg enable");
+
+	pta.header.id = ACX_SG_ENABLE;
+	pta.header.len = sizeof(pta) - sizeof(struct acx_header);
+
+	pta.enable = SG_ENABLE;
+
+	ret = wl12xx_cmd_configure(wl, &pta, sizeof(pta));
+	if (ret < 0) {
+		wl12xx_warning("failed to set softgemini enable: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_sg_cfg(struct wl12xx *wl)
+{
+	struct acx_bt_wlan_coex_param param;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx sg cfg");
+
+	/* BT-WLAN coext parameters */
+	param.header.id = ACX_SG_CFG;
+	param.header.len = sizeof(param) - sizeof(struct acx_header);
+
+	param.min_rate = RATE_INDEX_24MBPS;
+	param.bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
+	param.wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
+	param.sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
+	param.rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
+	param.tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
+	param.rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
+	param.tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
+	param.wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
+	param.bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
+	param.next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
+	param.wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
+	param.hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
+	param.next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
+	param.antenna_type = PTA_ANTENNA_TYPE_DEF;
+	param.signal_type = PTA_SIGNALING_TYPE_DEF;
+	param.afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
+	param.quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
+	param.max_cts = PTA_MAX_NUM_CTS_DEF;
+	param.wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
+	param.bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
+	param.missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
+	param.wlan_elp_hp = PTA_ELP_HP_DEF;
+	param.bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
+	param.ack_mode_dual_ant = PTA_ACK_MODE_DEF;
+	param.pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
+	param.pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
+	param.bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+
+	ret = wl12xx_cmd_configure(wl, &param, sizeof(param));
+	if (ret < 0) {
+		wl12xx_warning("failed to set sg config: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_cca_threshold(struct wl12xx *wl)
+{
+	struct acx_energy_detection detection;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx cca threshold");
+
+	detection.header.id = ACX_CCA_THRESHOLD;
+	detection.header.len = sizeof(detection) - sizeof(struct acx_header);
+
+	detection.rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
+	detection.tx_energy_detection = 0;
+
+	ret = wl12xx_cmd_configure(wl, &detection, sizeof(detection));
+	if (ret < 0) {
+		wl12xx_warning("failed to set cca threshold: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl)
+{
+	struct acx_beacon_broadcast bb;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx bcn dtim options");
+
+	bb.header.id = ACX_BCN_DTIM_OPTIONS;
+	bb.header.len = sizeof(bb) - sizeof(struct acx_header);
+
+	bb.beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
+	bb.broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
+	bb.rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
+	bb.ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+
+	ret = wl12xx_cmd_configure(wl, &bb, sizeof(bb));
+	if (ret < 0) {
+		wl12xx_warning("failed to set rx config: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_aid(struct wl12xx *wl, u16 aid)
+{
+	struct acx_aid acx_aid;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx aid");
+
+	acx_aid.header.id = ACX_AID;
+	acx_aid.header.len = sizeof(acx_aid) - sizeof(struct acx_header);
+
+	acx_aid.aid = aid;
+
+	ret = wl12xx_cmd_configure(wl, &acx_aid, sizeof(acx_aid));
+	if (ret < 0) {
+		wl12xx_warning("failed to set aid: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask)
+{
+	struct acx_event_mask mask;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx event mbox mask");
+
+	mask.header.id = ACX_EVENT_MBOX_MASK;
+	mask.header.len = sizeof(mask) - sizeof(struct acx_header);
+
+	/* high event mask is unused */
+	mask.high_event_mask = 0xffffffff;
+
+	mask.event_mask = event_mask;
+
+	ret = wl12xx_cmd_configure(wl, &mask, sizeof(mask));
+	if (ret < 0) {
+		wl12xx_warning("failed to set aid: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble)
+{
+	struct acx_preamble ie;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx_set_preamble");
+
+	memset(&ie, 0, sizeof(ie));
+
+	ie.header.id = ACX_PREAMBLE_TYPE;
+	ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+	ie.preamble = preamble;
+	ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+	if (ret < 0) {
+		wl12xx_warning("Setting of preamble failed: %d", ret);
+		return ret;
+	}
+	return 0;
+}
+
+int wl12xx_acx_cts_protect(struct wl12xx *wl,
+			   enum acx_ctsprotect_type ctsprotect)
+{
+	struct acx_ctsprotect ie;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx_set_ctsprotect");
+
+	memset(&ie, 0, sizeof(ie));
+
+	ie.header.id = ACX_CTS_PROTECTION;
+	ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+	ie.ctsprotect = ctsprotect;
+	ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+	if (ret < 0) {
+		wl12xx_warning("Setting of ctsprotect failed: %d", ret);
+		return ret;
+	}
+	return 0;
+}
+
+int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats)
+{
+	struct wl12xx_command *answer;
+	int ret;
+
+	wl12xx_debug(DEBUG_ACX, "acx statistics");
+
+	answer = kmalloc(sizeof(*answer), GFP_KERNEL);
+	if (!answer) {
+		wl12xx_warning("could not allocate memory for acx statistics");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = wl12xx_cmd_interrogate(wl, ACX_STATISTICS, sizeof(*answer),
+				     answer);
+	if (ret < 0) {
+		wl12xx_warning("acx statistics failed: %d", ret);
+		goto out;
+	}
+
+	memcpy(stats, answer->parameters, sizeof(*stats));
+
+out:
+	kfree(answer);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
new file mode 100644
index 00000000000..fb2d2340993
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -0,0 +1,1245 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_ACX_H__
+#define __WL12XX_ACX_H__
+
+#include "wl12xx.h"
+
+/* Target's information element */
+struct acx_header {
+	u16 id;
+	u16 len;
+};
+
+struct acx_error_counter {
+	struct acx_header header;
+
+	/* The number of PLCP errors since the last time this */
+	/* information element was interrogated. This field is */
+	/* automatically cleared when it is interrogated.*/
+	u32 PLCP_error;
+
+	/* The number of FCS errors since the last time this */
+	/* information element was interrogated. This field is */
+	/* automatically cleared when it is interrogated.*/
+	u32 FCS_error;
+
+	/* The number of MPDUs without PLCP header errors received*/
+	/* since the last time this information element was interrogated. */
+	/* This field is automatically cleared when it is interrogated.*/
+	u32 valid_frame;
+
+	/* the number of missed sequence numbers in the squentially */
+	/* values of frames seq numbers */
+	u32 seq_num_miss;
+} __attribute__ ((packed));
+
+struct acx_revision {
+	struct acx_header header;
+
+	/*
+	 * The WiLink firmware version, an ASCII string x.x.x.x,
+	 * that uniquely identifies the current firmware.
+	 * The left most digit is incremented each time a
+	 * significant change is made to the firmware, such as
+	 * code redesign or new platform support.
+	 * The second digit is incremented when major enhancements
+	 * are added or major fixes are made.
+	 * The third digit is incremented for each GA release.
+	 * The fourth digit is incremented for each build.
+	 * The first two digits identify a firmware release version,
+	 * in other words, a unique set of features.
+	 * The first three digits identify a GA release.
+	 */
+	char fw_version[20];
+
+	/*
+	 * This 4 byte field specifies the WiLink hardware version.
+	 * bits 0  - 15: Reserved.
+	 * bits 16 - 23: Version ID - The WiLink version ID
+	 *              (1 = first spin, 2 = second spin, and so on).
+	 * bits 24 - 31: Chip ID - The WiLink chip ID.
+	 */
+	u32 hw_version;
+} __attribute__ ((packed));
+
+enum wl12xx_psm_mode {
+	/* Active mode */
+	WL12XX_PSM_CAM = 0,
+
+	/* Power save mode */
+	WL12XX_PSM_PS = 1,
+
+	/* Extreme low power */
+	WL12XX_PSM_ELP = 2,
+};
+
+struct acx_sleep_auth {
+	struct acx_header header;
+
+	/* The sleep level authorization of the device. */
+	/* 0 - Always active*/
+	/* 1 - Power down mode: light / fast sleep*/
+	/* 2 - ELP mode: Deep / Max sleep*/
+	u8  sleep_auth;
+	u8  padding[3];
+} __attribute__ ((packed));
+
+#define TIM_ELE_ID    5
+#define PARTIAL_VBM_MAX    251
+
+struct tim {
+	u8 identity;
+	u8 length;
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
+} __attribute__ ((packed));
+
+/* Virtual Bit Map update */
+struct vbm_update_request {
+	__le16 len;
+	u8  padding[2];
+	struct tim tim;
+} __attribute__ ((packed));
+
+enum {
+	HOSTIF_PCI_MASTER_HOST_INDIRECT,
+	HOSTIF_PCI_MASTER_HOST_DIRECT,
+	HOSTIF_SLAVE,
+	HOSTIF_PKT_RING,
+	HOSTIF_DONTCARE = 0xFF
+};
+
+#define DEFAULT_UCAST_PRIORITY          0
+#define DEFAULT_RX_Q_PRIORITY           0
+#define DEFAULT_NUM_STATIONS            1
+#define DEFAULT_RXQ_PRIORITY            0 /* low 0 .. 15 high  */
+#define DEFAULT_RXQ_TYPE                0x07    /* All frames, Data/Ctrl/Mgmt */
+#define TRACE_BUFFER_MAX_SIZE           256
+
+#define  DP_RX_PACKET_RING_CHUNK_SIZE 1600
+#define  DP_TX_PACKET_RING_CHUNK_SIZE 1600
+#define  DP_RX_PACKET_RING_CHUNK_NUM 2
+#define  DP_TX_PACKET_RING_CHUNK_NUM 2
+#define  DP_TX_COMPLETE_TIME_OUT 20
+#define  FW_TX_CMPLT_BLOCK_SIZE 16
+
+struct acx_data_path_params {
+	struct acx_header header;
+
+	u16 rx_packet_ring_chunk_size;
+	u16 tx_packet_ring_chunk_size;
+
+	u8 rx_packet_ring_chunk_num;
+	u8 tx_packet_ring_chunk_num;
+
+	/*
+	 * Maximum number of packets that can be gathered
+	 * in the TX complete ring before an interrupt
+	 * is generated.
+	 */
+	u8 tx_complete_threshold;
+
+	/* Number of pending TX complete entries in cyclic ring.*/
+	u8 tx_complete_ring_depth;
+
+	/*
+	 * Max num microseconds since a packet enters the TX
+	 * complete ring until an interrupt is generated.
+	 */
+	u32 tx_complete_timeout;
+} __attribute__ ((packed));
+
+
+struct acx_data_path_params_resp {
+	struct acx_header header;
+
+	u16 rx_packet_ring_chunk_size;
+	u16 tx_packet_ring_chunk_size;
+
+	u8 rx_packet_ring_chunk_num;
+	u8 tx_packet_ring_chunk_num;
+
+	u8 pad[2];
+
+	u32 rx_packet_ring_addr;
+	u32 tx_packet_ring_addr;
+
+	u32 rx_control_addr;
+	u32 tx_control_addr;
+
+	u32 tx_complete_addr;
+} __attribute__ ((packed));
+
+#define TX_MSDU_LIFETIME_MIN       0
+#define TX_MSDU_LIFETIME_MAX       3000
+#define TX_MSDU_LIFETIME_DEF       512
+#define RX_MSDU_LIFETIME_MIN       0
+#define RX_MSDU_LIFETIME_MAX       0xFFFFFFFF
+#define RX_MSDU_LIFETIME_DEF       512000
+
+struct rx_msdu_lifetime {
+	struct acx_header header;
+
+	/*
+	 * The maximum amount of time, in TU, before the
+	 * firmware discards the MSDU.
+	 */
+	u32 lifetime;
+} __attribute__ ((packed));
+
+/*
+ * RX Config Options Table
+ * Bit		Definition
+ * ===		==========
+ * 31:14		Reserved
+ * 13		Copy RX Status - when set, write three receive status words
+ * 	 	to top of rx'd MPDUs.
+ * 		When cleared, do not write three status words (added rev 1.5)
+ * 12		Reserved
+ * 11		RX Complete upon FCS error - when set, give rx complete
+ *	 	interrupt for FCS errors, after the rx filtering, e.g. unicast
+ *	 	frames not to us with FCS error will not generate an interrupt.
+ * 10		SSID Filter Enable - When set, the WiLink discards all beacon,
+ *	        probe request, and probe response frames with an SSID that does
+ *		not match the SSID specified by the host in the START/JOIN
+ *		command.
+ *		When clear, the WiLink receives frames with any SSID.
+ * 9		Broadcast Filter Enable - When set, the WiLink discards all
+ * 	 	broadcast frames. When clear, the WiLink receives all received
+ *		broadcast frames.
+ * 8:6		Reserved
+ * 5		BSSID Filter Enable - When set, the WiLink discards any frames
+ * 	 	with a BSSID that does not match the BSSID specified by the
+ *		host.
+ *		When clear, the WiLink receives frames from any BSSID.
+ * 4		MAC Addr Filter - When set, the WiLink discards any frames
+ * 	 	with a destination address that does not match the MAC address
+ *		of the adaptor.
+ *		When clear, the WiLink receives frames destined to any MAC
+ *		address.
+ * 3		Promiscuous - When set, the WiLink receives all valid frames
+ * 	 	(i.e., all frames that pass the FCS check).
+ *		When clear, only frames that pass the other filters specified
+ *		are received.
+ * 2		FCS - When set, the WiLink includes the FCS with the received
+ *	 	frame.
+ *		When cleared, the FCS is discarded.
+ * 1		PLCP header - When set, write all data from baseband to frame
+ * 	 	buffer including PHY header.
+ * 0		Reserved - Always equal to 0.
+ *
+ * RX Filter Options Table
+ * Bit		Definition
+ * ===		==========
+ * 31:12		Reserved - Always equal to 0.
+ * 11		Association - When set, the WiLink receives all association
+ * 	 	related frames (association request/response, reassocation
+ *		request/response, and disassociation). When clear, these frames
+ *		are discarded.
+ * 10		Auth/De auth - When set, the WiLink receives all authentication
+ * 	 	and de-authentication frames. When clear, these frames are
+ *		discarded.
+ * 9		Beacon - When set, the WiLink receives all beacon frames.
+ * 	 	When clear, these frames are discarded.
+ * 8		Contention Free - When set, the WiLink receives all contention
+ * 	 	free frames.
+ *		When clear, these frames are discarded.
+ * 7		Control - When set, the WiLink receives all control frames.
+ * 	 	When clear, these frames are discarded.
+ * 6		Data - When set, the WiLink receives all data frames.
+ * 	 	When clear, these frames are discarded.
+ * 5		FCS Error - When set, the WiLink receives frames that have FCS
+ *	 	errors.
+ *		When clear, these frames are discarded.
+ * 4		Management - When set, the WiLink receives all management
+ *		frames.
+ * 	 	When clear, these frames are discarded.
+ * 3		Probe Request - When set, the WiLink receives all probe request
+ * 	 	frames.
+ *		When clear, these frames are discarded.
+ * 2		Probe Response - When set, the WiLink receives all probe
+ * 		response frames.
+ *		When clear, these frames are discarded.
+ * 1		RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK
+ * 	 	frames.
+ *		When clear, these frames are discarded.
+ * 0		Rsvd Type/Sub Type - When set, the WiLink receives all frames
+ * 	 	that have reserved frame types and sub types as defined by the
+ *		802.11 specification.
+ *		When clear, these frames are discarded.
+ */
+struct acx_rx_config {
+	struct acx_header header;
+
+	u32 config_options;
+	u32 filter_options;
+} __attribute__ ((packed));
+
+enum {
+	QOS_AC_BE = 0,
+	QOS_AC_BK,
+	QOS_AC_VI,
+	QOS_AC_VO,
+	QOS_HIGHEST_AC_INDEX = QOS_AC_VO,
+};
+
+#define MAX_NUM_OF_AC             (QOS_HIGHEST_AC_INDEX+1)
+#define FIRST_AC_INDEX            QOS_AC_BE
+#define MAX_NUM_OF_802_1d_TAGS    8
+#define AC_PARAMS_MAX_TSID        15
+#define MAX_APSD_CONF             0xffff
+
+#define  QOS_TX_HIGH_MIN      (0)
+#define  QOS_TX_HIGH_MAX      (100)
+
+#define  QOS_TX_HIGH_BK_DEF   (25)
+#define  QOS_TX_HIGH_BE_DEF   (35)
+#define  QOS_TX_HIGH_VI_DEF   (35)
+#define  QOS_TX_HIGH_VO_DEF   (35)
+
+#define  QOS_TX_LOW_BK_DEF    (15)
+#define  QOS_TX_LOW_BE_DEF    (25)
+#define  QOS_TX_LOW_VI_DEF    (25)
+#define  QOS_TX_LOW_VO_DEF    (25)
+
+struct acx_tx_queue_qos_config {
+	struct acx_header header;
+
+	u8 qid;
+	u8 pad[3];
+
+	/* Max number of blocks allowd in the queue */
+	u16 high_threshold;
+
+	/* Lowest memory blocks guaranteed for this queue */
+	u16 low_threshold;
+} __attribute__ ((packed));
+
+struct acx_packet_detection {
+	struct acx_header header;
+
+	u32 threshold;
+} __attribute__ ((packed));
+
+
+enum acx_slot_type {
+	SLOT_TIME_LONG = 0,
+	SLOT_TIME_SHORT = 1,
+	DEFAULT_SLOT_TIME = SLOT_TIME_SHORT,
+	MAX_SLOT_TIMES = 0xFF
+};
+
+#define STATION_WONE_INDEX 0
+
+struct acx_slot {
+	struct acx_header header;
+
+	u8 wone_index; /* Reserved */
+	u8 slot_time;
+	u8 reserved[6];
+} __attribute__ ((packed));
+
+
+#define ADDRESS_GROUP_MAX	(8)
+#define ADDRESS_GROUP_MAX_LEN	(ETH_ALEN * ADDRESS_GROUP_MAX)
+
+struct multicast_grp_addr_start {
+	struct acx_header header;
+
+	u8 enabled;
+	u8 num_groups;
+	u8 pad[2];
+	u8 mac_table[ADDRESS_GROUP_MAX_LEN];
+} __attribute__ ((packed));
+
+
+#define  RX_TIMEOUT_PS_POLL_MIN    0
+#define  RX_TIMEOUT_PS_POLL_MAX    (200000)
+#define  RX_TIMEOUT_PS_POLL_DEF    (15)
+#define  RX_TIMEOUT_UPSD_MIN       0
+#define  RX_TIMEOUT_UPSD_MAX       (200000)
+#define  RX_TIMEOUT_UPSD_DEF       (15)
+
+struct acx_rx_timeout {
+	struct acx_header header;
+
+	/*
+	 * The longest time the STA will wait to receive
+	 * traffic from the AP after a PS-poll has been
+	 * transmitted.
+	 */
+	u16 ps_poll_timeout;
+
+	/*
+	 * The longest time the STA will wait to receive
+	 * traffic from the AP after a frame has been sent
+	 * from an UPSD enabled queue.
+	 */
+	u16 upsd_timeout;
+} __attribute__ ((packed));
+
+#define RTS_THRESHOLD_MIN              0
+#define RTS_THRESHOLD_MAX              4096
+#define RTS_THRESHOLD_DEF              2347
+
+struct acx_rts_threshold {
+	struct acx_header header;
+
+	u16 threshold;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_beacon_filter_option {
+	struct acx_header header;
+
+	u8 enable;
+
+	/*
+	 * The number of beacons without the unicast TIM
+	 * bit set that the firmware buffers before
+	 * signaling the host about ready frames.
+	 * When set to 0 and the filter is enabled, beacons
+	 * without the unicast TIM bit set are dropped.
+	 */
+	u8 max_num_beacons;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+/*
+ * ACXBeaconFilterEntry (not 221)
+ * Byte Offset     Size (Bytes)    Definition
+ * ===========     ============    ==========
+ * 0				1               IE identifier
+ * 1               1               Treatment bit mask
+ *
+ * ACXBeaconFilterEntry (221)
+ * Byte Offset     Size (Bytes)    Definition
+ * ===========     ============    ==========
+ * 0               1               IE identifier
+ * 1               1               Treatment bit mask
+ * 2               3               OUI
+ * 5               1               Type
+ * 6               2               Version
+ *
+ *
+ * Treatment bit mask - The information element handling:
+ * bit 0 - The information element is compared and transferred
+ * in case of change.
+ * bit 1 - The information element is transferred to the host
+ * with each appearance or disappearance.
+ * Note that both bits can be set at the same time.
+ */
+#define	BEACON_FILTER_TABLE_MAX_IE_NUM		       (32)
+#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6)
+#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE	       (2)
+#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6)
+#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \
+			    BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \
+			   (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
+			    BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
+
+struct acx_beacon_filter_ie_table {
+	struct acx_header header;
+
+	u8 num_ie;
+	u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
+	u8 pad[3];
+} __attribute__ ((packed));
+
+enum {
+	SG_ENABLE = 0,
+	SG_DISABLE,
+	SG_SENSE_NO_ACTIVITY,
+	SG_SENSE_ACTIVE
+};
+
+struct acx_bt_wlan_coex {
+	struct acx_header header;
+
+	/*
+	 * 0 -> PTA enabled
+	 * 1 -> PTA disabled
+	 * 2 -> sense no active mode, i.e.
+	 *      an interrupt is sent upon
+	 *      BT activity.
+	 * 3 -> PTA is switched on in response
+	 *      to the interrupt sending.
+	 */
+	u8 enable;
+	u8 pad[3];
+} __attribute__ ((packed));
+
+#define PTA_ANTENNA_TYPE_DEF		  (0)
+#define PTA_BT_HP_MAXTIME_DEF		  (2000)
+#define PTA_WLAN_HP_MAX_TIME_DEF	  (5000)
+#define PTA_SENSE_DISABLE_TIMER_DEF	  (1350)
+#define PTA_PROTECTIVE_RX_TIME_DEF	  (1500)
+#define PTA_PROTECTIVE_TX_TIME_DEF	  (1500)
+#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
+#define PTA_SIGNALING_TYPE_DEF		  (1)
+#define PTA_AFH_LEVERAGE_ON_DEF		  (0)
+#define PTA_NUMBER_QUIET_CYCLE_DEF	  (0)
+#define PTA_MAX_NUM_CTS_DEF		  (3)
+#define PTA_NUMBER_OF_WLAN_PACKETS_DEF	  (2)
+#define PTA_NUMBER_OF_BT_PACKETS_DEF	  (2)
+#define PTA_PROTECTIVE_RX_TIME_FAST_DEF	  (1500)
+#define PTA_PROTECTIVE_TX_TIME_FAST_DEF	  (3000)
+#define PTA_CYCLE_TIME_FAST_DEF		  (8700)
+#define PTA_RX_FOR_AVALANCHE_DEF	  (5)
+#define PTA_ELP_HP_DEF			  (0)
+#define PTA_ANTI_STARVE_PERIOD_DEF	  (500)
+#define PTA_ANTI_STARVE_NUM_CYCLE_DEF	  (4)
+#define PTA_ALLOW_PA_SD_DEF		  (1)
+#define PTA_TIME_BEFORE_BEACON_DEF	  (6300)
+#define PTA_HPDM_MAX_TIME_DEF		  (1600)
+#define PTA_TIME_OUT_NEXT_WLAN_DEF	  (2550)
+#define PTA_AUTO_MODE_NO_CTS_DEF	  (0)
+#define PTA_BT_HP_RESPECTED_DEF		  (3)
+#define PTA_WLAN_RX_MIN_RATE_DEF	  (24)
+#define PTA_ACK_MODE_DEF		  (1)
+
+struct acx_bt_wlan_coex_param {
+	struct acx_header header;
+
+	/*
+	 * The minimum rate of a received WLAN packet in the STA,
+	 * during protective mode, of which a new BT-HP request
+	 * during this Rx will always be respected and gain the antenna.
+	 */
+	u32 min_rate;
+
+	/* Max time the BT HP will be respected. */
+	u16 bt_hp_max_time;
+
+	/* Max time the WLAN HP will be respected. */
+	u16 wlan_hp_max_time;
+
+	/*
+	 * The time between the last BT activity
+	 * and the moment when the sense mode returns
+	 * to SENSE_INACTIVE.
+	 */
+	u16 sense_disable_timer;
+
+	/* Time before the next BT HP instance */
+	u16 rx_time_bt_hp;
+	u16 tx_time_bt_hp;
+
+	/* range: 10-20000    default: 1500 */
+	u16 rx_time_bt_hp_fast;
+	u16 tx_time_bt_hp_fast;
+
+	/* range: 2000-65535  default: 8700 */
+	u16 wlan_cycle_fast;
+
+	/* range: 0 - 15000 (Msec) default: 1000 */
+	u16 bt_anti_starvation_period;
+
+	/* range 400-10000(Usec) default: 3000 */
+	u16 next_bt_lp_packet;
+
+	/* Deafult: worst case for BT DH5 traffic */
+	u16 wake_up_beacon;
+
+	/* range: 0-50000(Usec) default: 1050 */
+	u16 hp_dm_max_guard_time;
+
+	/*
+	 * This is to prevent both BT & WLAN antenna
+	 * starvation.
+	 * Range: 100-50000(Usec) default:2550
+	 */
+	u16 next_wlan_packet;
+
+	/* 0 -> shared antenna */
+	u8 antenna_type;
+
+	/*
+	 * 0 -> TI legacy
+	 * 1 -> Palau
+	 */
+	u8 signal_type;
+
+	/*
+	 * BT AFH status
+	 * 0 -> no AFH
+	 * 1 -> from dedicated GPIO
+	 * 2 -> AFH on (from host)
+	 */
+	u8 afh_leverage_on;
+
+	/*
+	 * The number of cycles during which no
+	 * TX will be sent after 1 cycle of RX
+	 * transaction in protective mode
+	 */
+	u8 quiet_cycle_num;
+
+	/*
+	 * The maximum number of CTSs that will
+	 * be sent for receiving RX packet in
+	 * protective mode
+	 */
+	u8 max_cts;
+
+	/*
+	 * The number of WLAN packets
+	 * transferred in common mode before
+	 * switching to BT.
+	 */
+	u8 wlan_packets_num;
+
+	/*
+	 * The number of BT packets
+	 * transferred in common mode before
+	 * switching to WLAN.
+	 */
+	u8 bt_packets_num;
+
+	/* range: 1-255  default: 5 */
+	u8 missed_rx_avalanche;
+
+	/* range: 0-1    default: 1 */
+	u8 wlan_elp_hp;
+
+	/* range: 0 - 15  default: 4 */
+	u8 bt_anti_starvation_cycles;
+
+	u8 ack_mode_dual_ant;
+
+	/*
+	 * Allow PA_SD assertion/de-assertion
+	 * during enabled BT activity.
+	 */
+	u8 pa_sd_enable;
+
+	/*
+	 * Enable/Disable PTA in auto mode:
+	 * Support Both Active & P.S modes
+	 */
+	u8 pta_auto_mode_enable;
+
+	/* range: 0 - 20  default: 1 */
+	u8 bt_hp_respected_num;
+} __attribute__ ((packed));
+
+#define CCA_THRSH_ENABLE_ENERGY_D       0x140A
+#define CCA_THRSH_DISABLE_ENERGY_D      0xFFEF
+
+struct acx_energy_detection {
+	struct acx_header header;
+
+	/* The RX Clear Channel Assessment threshold in the PHY */
+	u16 rx_cca_threshold;
+	u8 tx_energy_detection;
+	u8 pad;
+} __attribute__ ((packed));
+
+#define BCN_RX_TIMEOUT_DEF_VALUE        10000
+#define BROADCAST_RX_TIMEOUT_DEF_VALUE  20000
+#define RX_BROADCAST_IN_PS_DEF_VALUE    1
+#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
+
+struct acx_beacon_broadcast {
+	struct acx_header header;
+
+	u16 beacon_rx_timeout;
+	u16 broadcast_timeout;
+
+	/* Enables receiving of broadcast packets in PS mode */
+	u8 rx_broadcast_in_ps;
+
+	/* Consecutive PS Poll failures before updating the host */
+	u8 ps_poll_threshold;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_event_mask {
+	struct acx_header header;
+
+	u32 event_mask;
+	u32 high_event_mask; /* Unused */
+} __attribute__ ((packed));
+
+#define CFG_RX_FCS		BIT(2)
+#define CFG_RX_ALL_GOOD		BIT(3)
+#define CFG_UNI_FILTER_EN	BIT(4)
+#define CFG_BSSID_FILTER_EN	BIT(5)
+#define CFG_MC_FILTER_EN	BIT(6)
+#define CFG_MC_ADDR0_EN		BIT(7)
+#define CFG_MC_ADDR1_EN		BIT(8)
+#define CFG_BC_REJECT_EN	BIT(9)
+#define CFG_SSID_FILTER_EN	BIT(10)
+#define CFG_RX_INT_FCS_ERROR	BIT(11)
+#define CFG_RX_INT_ENCRYPTED	BIT(12)
+#define CFG_RX_WR_RX_STATUS	BIT(13)
+#define CFG_RX_FILTER_NULTI	BIT(14)
+#define CFG_RX_RESERVE		BIT(15)
+#define CFG_RX_TIMESTAMP_TSF	BIT(16)
+
+#define CFG_RX_RSV_EN		BIT(0)
+#define CFG_RX_RCTS_ACK		BIT(1)
+#define CFG_RX_PRSP_EN		BIT(2)
+#define CFG_RX_PREQ_EN		BIT(3)
+#define CFG_RX_MGMT_EN		BIT(4)
+#define CFG_RX_FCS_ERROR	BIT(5)
+#define CFG_RX_DATA_EN		BIT(6)
+#define CFG_RX_CTL_EN		BIT(7)
+#define CFG_RX_CF_EN		BIT(8)
+#define CFG_RX_BCN_EN		BIT(9)
+#define CFG_RX_AUTH_EN		BIT(10)
+#define CFG_RX_ASSOC_EN		BIT(11)
+
+#define SCAN_PASSIVE		BIT(0)
+#define SCAN_5GHZ_BAND		BIT(1)
+#define SCAN_TRIGGERED		BIT(2)
+#define SCAN_PRIORITY_HIGH	BIT(3)
+
+struct acx_fw_gen_frame_rates {
+	struct acx_header header;
+
+	u8 tx_ctrl_frame_rate; /* RATE_* */
+	u8 tx_ctrl_frame_mod; /* CCK_* or PBCC_* */
+	u8 tx_mgt_frame_rate;
+	u8 tx_mgt_frame_mod;
+} __attribute__ ((packed));
+
+/* STA MAC */
+struct dot11_station_id {
+	struct acx_header header;
+
+	u8 mac[ETH_ALEN];
+	u8 pad[2];
+} __attribute__ ((packed));
+
+/* HW encryption keys */
+#define NUM_ACCESS_CATEGORIES_COPY 4
+#define MAX_KEY_SIZE 32
+
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE      0x01
+/* When set, disable HW decryption */
+#define DF_SNIFF_MODE_ENABLE       0x80
+
+struct acx_feature_config {
+	struct acx_header header;
+
+	u32 options;
+	u32 data_flow_options;
+} __attribute__ ((packed));
+
+enum acx_key_action {
+	KEY_ADD_OR_REPLACE = 1,
+	KEY_REMOVE         = 2,
+	KEY_SET_ID         = 3,
+	MAX_KEY_ACTION     = 0xffff,
+};
+
+enum acx_key_type {
+	KEY_WEP_DEFAULT       = 0,
+	KEY_WEP_ADDR          = 1,
+	KEY_AES_GROUP         = 4,
+	KEY_AES_PAIRWISE      = 5,
+	KEY_WEP_GROUP         = 6,
+	KEY_TKIP_MIC_GROUP    = 10,
+	KEY_TKIP_MIC_PAIRWISE = 11,
+};
+
+/*
+ *
+ * key_type_e   key size    key format
+ * ----------   ---------   ----------
+ * 0x00         5, 13, 29   Key data
+ * 0x01         5, 13, 29   Key data
+ * 0x04         16          16 bytes of key data
+ * 0x05         16          16 bytes of key data
+ * 0x0a         32          16 bytes of TKIP key data
+ *                          8 bytes of RX MIC key data
+ *                          8 bytes of TX MIC key data
+ * 0x0b         32          16 bytes of TKIP key data
+ *                          8 bytes of RX MIC key data
+ *                          8 bytes of TX MIC key data
+ *
+ */
+
+struct acx_set_key {
+	/* Ignored for default WEP key */
+	u8 addr[ETH_ALEN];
+
+	/* key_action_e */
+	u16 key_action;
+
+	u16 reserved_1;
+
+	/* key size in bytes */
+	u8 key_size;
+
+	/* key_type_e */
+	u8 key_type;
+	u8 ssid_profile;
+
+	/*
+	 * TKIP, AES: frame's key id field.
+	 * For WEP default key: key id;
+	 */
+	u8 id;
+	u8 reserved_2[6];
+	u8 key[MAX_KEY_SIZE];
+	u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+	u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+} __attribute__ ((packed));
+
+struct acx_current_tx_power {
+	struct acx_header header;
+
+	u8  current_tx_power;
+	u8  padding[3];
+} __attribute__ ((packed));
+
+struct acx_dot11_default_key {
+	struct acx_header header;
+
+	u8 id;
+	u8 pad[3];
+} __attribute__ ((packed));
+
+struct acx_tsf_info {
+	struct acx_header header;
+
+	u32 current_tsf_msb;
+	u32 current_tsf_lsb;
+	u32 last_TBTT_msb;
+	u32 last_TBTT_lsb;
+	u8 last_dtim_count;
+	u8 pad[3];
+} __attribute__ ((packed));
+
+/* 802.11 PS */
+enum acx_ps_mode {
+	STATION_ACTIVE_MODE,
+	STATION_POWER_SAVE_MODE
+};
+
+struct acx_ps_params {
+	u8 ps_mode; /* STATION_* */
+	u8 send_null_data; /* Do we have to send NULL data packet ? */
+	u8 retries; /* Number of retires for the initial NULL data packet */
+
+	 /*
+	  * TUs during which the target stays awake after switching
+	  * to power save mode.
+	  */
+	u8 hang_over_period;
+	u16 null_data_rate;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_wake_up_event {
+	WAKE_UP_EVENT_BEACON_BITMAP	= 0x01, /* Wake on every Beacon*/
+	WAKE_UP_EVENT_DTIM_BITMAP	= 0x02,	/* Wake on every DTIM*/
+	WAKE_UP_EVENT_N_DTIM_BITMAP	= 0x04, /* Wake on every Nth DTIM */
+	WAKE_UP_EVENT_N_BEACONS_BITMAP	= 0x08, /* Wake on every Nth Beacon */
+	WAKE_UP_EVENT_BITS_MASK		= 0x0F
+};
+
+struct acx_wake_up_condition {
+	struct acx_header header;
+
+	u8 wake_up_event; /* Only one bit can be set */
+	u8 listen_interval;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_aid {
+	struct acx_header header;
+
+	/*
+	 * To be set when associated with an AP.
+	 */
+	u16 aid;
+	u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_preamble_type {
+	ACX_PREAMBLE_LONG = 0,
+	ACX_PREAMBLE_SHORT = 1
+};
+
+struct acx_preamble {
+	struct acx_header header;
+	/*
+	 * When set, the WiLink transmits the frames with a short preamble and
+	 * when cleared, the WiLink transmits the frames with a long preamble.
+	 */
+	u8 preamble;
+	u8 padding[3];
+} __attribute__ ((packed));
+
+enum acx_ctsprotect_type {
+	CTSPROTECT_DISABLE = 0,
+	CTSPROTECT_ENABLE = 1
+};
+
+struct acx_ctsprotect {
+	struct acx_header header;
+	u8 ctsprotect;
+	u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_tx_statistics {
+	u32 internal_desc_overflow;
+}  __attribute__ ((packed));
+
+struct acx_rx_statistics {
+	u32 out_of_mem;
+	u32 hdr_overflow;
+	u32 hw_stuck;
+	u32 dropped;
+	u32 fcs_err;
+	u32 xfr_hint_trig;
+	u32 path_reset;
+	u32 reset_counter;
+} __attribute__ ((packed));
+
+struct acx_dma_statistics {
+	u32 rx_requested;
+	u32 rx_errors;
+	u32 tx_requested;
+	u32 tx_errors;
+}  __attribute__ ((packed));
+
+struct acx_isr_statistics {
+	/* host command complete */
+	u32 cmd_cmplt;
+
+	/* fiqisr() */
+	u32 fiqs;
+
+	/* (INT_STS_ND & INT_TRIG_RX_HEADER) */
+	u32 rx_headers;
+
+	/* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
+	u32 rx_completes;
+
+	/* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
+	u32 rx_mem_overflow;
+
+	/* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
+	u32 rx_rdys;
+
+	/* irqisr() */
+	u32 irqs;
+
+	/* (INT_STS_ND & INT_TRIG_TX_PROC) */
+	u32 tx_procs;
+
+	/* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
+	u32 decrypt_done;
+
+	/* (INT_STS_ND & INT_TRIG_DMA0) */
+	u32 dma0_done;
+
+	/* (INT_STS_ND & INT_TRIG_DMA1) */
+	u32 dma1_done;
+
+	/* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
+	u32 tx_exch_complete;
+
+	/* (INT_STS_ND & INT_TRIG_COMMAND) */
+	u32 commands;
+
+	/* (INT_STS_ND & INT_TRIG_RX_PROC) */
+	u32 rx_procs;
+
+	/* (INT_STS_ND & INT_TRIG_PM_802) */
+	u32 hw_pm_mode_changes;
+
+	/* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
+	u32 host_acknowledges;
+
+	/* (INT_STS_ND & INT_TRIG_PM_PCI) */
+	u32 pci_pm;
+
+	/* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
+	u32 wakeups;
+
+	/* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
+	u32 low_rssi;
+} __attribute__ ((packed));
+
+struct acx_wep_statistics {
+	/* WEP address keys configured */
+	u32 addr_key_count;
+
+	/* default keys configured */
+	u32 default_key_count;
+
+	u32 reserved;
+
+	/* number of times that WEP key not found on lookup */
+	u32 key_not_found;
+
+	/* number of times that WEP key decryption failed */
+	u32 decrypt_fail;
+
+	/* WEP packets decrypted */
+	u32 packets;
+
+	/* WEP decrypt interrupts */
+	u32 interrupt;
+} __attribute__ ((packed));
+
+#define ACX_MISSED_BEACONS_SPREAD 10
+
+struct acx_pwr_statistics {
+	/* the amount of enters into power save mode (both PD & ELP) */
+	u32 ps_enter;
+
+	/* the amount of enters into ELP mode */
+	u32 elp_enter;
+
+	/* the amount of missing beacon interrupts to the host */
+	u32 missing_bcns;
+
+	/* the amount of wake on host-access times */
+	u32 wake_on_host;
+
+	/* the amount of wake on timer-expire */
+	u32 wake_on_timer_exp;
+
+	/* the number of packets that were transmitted with PS bit set */
+	u32 tx_with_ps;
+
+	/* the number of packets that were transmitted with PS bit clear */
+	u32 tx_without_ps;
+
+	/* the number of received beacons */
+	u32 rcvd_beacons;
+
+	/* the number of entering into PowerOn (power save off) */
+	u32 power_save_off;
+
+	/* the number of entries into power save mode */
+	u16 enable_ps;
+
+	/*
+	 * the number of exits from power save, not including failed PS
+	 * transitions
+	 */
+	u16 disable_ps;
+
+	/*
+	 * the number of times the TSF counter was adjusted because
+	 * of drift
+	 */
+	u32 fix_tsf_ps;
+
+	/* Gives statistics about the spread continuous missed beacons.
+	 * The 16 LSB are dedicated for the PS mode.
+	 * The 16 MSB are dedicated for the PS mode.
+	 * cont_miss_bcns_spread[0] - single missed beacon.
+	 * cont_miss_bcns_spread[1] - two continuous missed beacons.
+	 * cont_miss_bcns_spread[2] - three continuous missed beacons.
+	 * ...
+	 * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
+	*/
+	u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+
+	/* the number of beacons in awake mode */
+	u32 rcvd_awake_beacons;
+} __attribute__ ((packed));
+
+struct acx_mic_statistics {
+	u32 rx_pkts;
+	u32 calc_failure;
+} __attribute__ ((packed));
+
+struct acx_aes_statistics {
+	u32 encrypt_fail;
+	u32 decrypt_fail;
+	u32 encrypt_packets;
+	u32 decrypt_packets;
+	u32 encrypt_interrupt;
+	u32 decrypt_interrupt;
+} __attribute__ ((packed));
+
+struct acx_event_statistics {
+	u32 heart_beat;
+	u32 calibration;
+	u32 rx_mismatch;
+	u32 rx_mem_empty;
+	u32 rx_pool;
+	u32 oom_late;
+	u32 phy_transmit_error;
+	u32 tx_stuck;
+} __attribute__ ((packed));
+
+struct acx_ps_statistics {
+	u32 pspoll_timeouts;
+	u32 upsd_timeouts;
+	u32 upsd_max_sptime;
+	u32 upsd_max_apturn;
+	u32 pspoll_max_apturn;
+	u32 pspoll_utilization;
+	u32 upsd_utilization;
+} __attribute__ ((packed));
+
+struct acx_rxpipe_statistics {
+	u32 rx_prep_beacon_drop;
+	u32 descr_host_int_trig_rx_data;
+	u32 beacon_buffer_thres_host_int_trig_rx_data;
+	u32 missed_beacon_host_int_trig_rx_data;
+	u32 tx_xfr_host_int_trig_rx_data;
+} __attribute__ ((packed));
+
+struct acx_statistics {
+	struct acx_header header;
+
+	struct acx_tx_statistics tx;
+	struct acx_rx_statistics rx;
+	struct acx_dma_statistics dma;
+	struct acx_isr_statistics isr;
+	struct acx_wep_statistics wep;
+	struct acx_pwr_statistics pwr;
+	struct acx_aes_statistics aes;
+	struct acx_mic_statistics mic;
+	struct acx_event_statistics event;
+	struct acx_ps_statistics ps;
+	struct acx_rxpipe_statistics rxpipe;
+} __attribute__ ((packed));
+
+enum {
+	ACX_WAKE_UP_CONDITIONS      = 0x0002,
+	ACX_MEM_CFG                 = 0x0003,
+	ACX_SLOT                    = 0x0004,
+	ACX_QUEUE_HEAD              = 0x0005, /* for MASTER mode only */
+	ACX_AC_CFG                  = 0x0007,
+	ACX_MEM_MAP                 = 0x0008,
+	ACX_AID                     = 0x000A,
+	ACX_RADIO_PARAM             = 0x000B, /* Not used */
+	ACX_CFG                     = 0x000C, /* Not used */
+	ACX_FW_REV                  = 0x000D,
+	ACX_MEDIUM_USAGE            = 0x000F,
+	ACX_RX_CFG                  = 0x0010,
+	ACX_TX_QUEUE_CFG            = 0x0011, /* FIXME: only used by wl1251 */
+	ACX_BSS_IN_PS               = 0x0012, /* for AP only */
+	ACX_STATISTICS              = 0x0013, /* Debug API */
+	ACX_FEATURE_CFG             = 0x0015,
+	ACX_MISC_CFG                = 0x0017, /* Not used */
+	ACX_TID_CFG                 = 0x001A,
+	ACX_BEACON_FILTER_OPT       = 0x001F,
+	ACX_LOW_RSSI                = 0x0020,
+	ACX_NOISE_HIST              = 0x0021,
+	ACX_HDK_VERSION             = 0x0022, /* ??? */
+	ACX_PD_THRESHOLD            = 0x0023,
+	ACX_DATA_PATH_PARAMS        = 0x0024, /* WO */
+	ACX_DATA_PATH_RESP_PARAMS   = 0x0024, /* RO */
+	ACX_CCA_THRESHOLD           = 0x0025,
+	ACX_EVENT_MBOX_MASK         = 0x0026,
+#ifdef FW_RUNNING_AS_AP
+	ACX_DTIM_PERIOD             = 0x0027, /* for AP only */
+#else
+	ACX_WR_TBTT_AND_DTIM        = 0x0027, /* STA only */
+#endif
+	ACX_ACI_OPTION_CFG          = 0x0029, /* OBSOLETE (for 1251)*/
+	ACX_GPIO_CFG                = 0x002A, /* Not used */
+	ACX_GPIO_SET                = 0x002B, /* Not used */
+	ACX_PM_CFG                  = 0x002C, /* To Be Documented */
+	ACX_CONN_MONIT_PARAMS       = 0x002D,
+	ACX_AVERAGE_RSSI            = 0x002E, /* Not used */
+	ACX_CONS_TX_FAILURE         = 0x002F,
+	ACX_BCN_DTIM_OPTIONS        = 0x0031,
+	ACX_SG_ENABLE               = 0x0032,
+	ACX_SG_CFG                  = 0x0033,
+	ACX_ANTENNA_DIVERSITY_CFG   = 0x0035, /* To Be Documented */
+	ACX_LOW_SNR		    = 0x0037, /* To Be Documented */
+	ACX_BEACON_FILTER_TABLE     = 0x0038,
+	ACX_ARP_IP_FILTER           = 0x0039,
+	ACX_ROAMING_STATISTICS_TBL  = 0x003B,
+	ACX_RATE_POLICY             = 0x003D,
+	ACX_CTS_PROTECTION          = 0x003E,
+	ACX_SLEEP_AUTH              = 0x003F,
+	ACX_PREAMBLE_TYPE	    = 0x0040,
+	ACX_ERROR_CNT               = 0x0041,
+	ACX_FW_GEN_FRAME_RATES      = 0x0042,
+	ACX_IBSS_FILTER		    = 0x0044,
+	ACX_SERVICE_PERIOD_TIMEOUT  = 0x0045,
+	ACX_TSF_INFO                = 0x0046,
+	ACX_CONFIG_PS_WMM           = 0x0049,
+	ACX_ENABLE_RX_DATA_FILTER   = 0x004A,
+	ACX_SET_RX_DATA_FILTER      = 0x004B,
+	ACX_GET_DATA_FILTER_STATISTICS = 0x004C,
+	ACX_POWER_LEVEL_TABLE       = 0x004D,
+	ACX_BET_ENABLE              = 0x0050,
+	DOT11_STATION_ID            = 0x1001,
+	DOT11_RX_MSDU_LIFE_TIME     = 0x1004,
+	DOT11_CUR_TX_PWR            = 0x100D,
+	DOT11_DEFAULT_KEY           = 0x1010,
+	DOT11_RX_DOT11_MODE         = 0x1012,
+	DOT11_RTS_THRESHOLD         = 0x1013,
+	DOT11_GROUP_ADDRESS_TBL     = 0x1014,
+
+	MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
+
+	MAX_IE = 0xFFFF
+};
+
+
+int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
+			   u8 mgt_rate, u8 mgt_mod);
+int wl12xx_acx_station_id(struct wl12xx *wl);
+int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id);
+int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval);
+int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth);
+int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len);
+int wl12xx_acx_tx_power(struct wl12xx *wl, int power);
+int wl12xx_acx_feature_cfg(struct wl12xx *wl);
+int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len);
+int wl12xx_acx_data_path_params(struct wl12xx *wl,
+				struct acx_data_path_params_resp *data_path);
+int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time);
+int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter);
+int wl12xx_acx_pd_threshold(struct wl12xx *wl);
+int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time);
+int wl12xx_acx_group_address_tbl(struct wl12xx *wl);
+int wl12xx_acx_service_period_timeout(struct wl12xx *wl);
+int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold);
+int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl);
+int wl12xx_acx_beacon_filter_table(struct wl12xx *wl);
+int wl12xx_acx_sg_enable(struct wl12xx *wl);
+int wl12xx_acx_sg_cfg(struct wl12xx *wl);
+int wl12xx_acx_cca_threshold(struct wl12xx *wl);
+int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl);
+int wl12xx_acx_aid(struct wl12xx *wl, u16 aid);
+int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask);
+int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble);
+int wl12xx_acx_cts_protect(struct wl12xx *wl,
+			    enum acx_ctsprotect_type ctsprotect);
+int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats);
+
+#endif /* __WL12XX_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
new file mode 100644
index 00000000000..48ac08c429b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -0,0 +1,295 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+
+#include "reg.h"
+#include "boot.h"
+#include "spi.h"
+#include "event.h"
+
+static void wl12xx_boot_enable_interrupts(struct wl12xx *wl)
+{
+	enable_irq(wl->irq);
+}
+
+void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl)
+{
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+	wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+}
+
+int wl12xx_boot_soft_reset(struct wl12xx *wl)
+{
+	unsigned long timeout;
+	u32 boot_data;
+
+	/* perform soft reset */
+	wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+	/* SOFT_RESET is self clearing */
+	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+	while (1) {
+		boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+		wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			/* 1.2 check pWhalBus->uSelfClearTime if the
+			 * timeout was reached */
+			wl12xx_error("soft reset timeout");
+			return -1;
+		}
+
+		udelay(SOFT_RESET_STALL_TIME);
+	}
+
+	/* disable Rx/Tx */
+	wl12xx_reg_write32(wl, ENABLE, 0x0);
+
+	/* disable auto calibration on start*/
+	wl12xx_reg_write32(wl, SPARE_A2, 0xffff);
+
+	return 0;
+}
+
+int wl12xx_boot_init_seq(struct wl12xx *wl)
+{
+	u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
+
+	/*
+	 * col #1: INTEGER_DIVIDER
+	 * col #2: FRACTIONAL_DIVIDER
+	 * col #3: ATTN_BB
+	 * col #4: ALPHA_BB
+	 * col #5: STOP_TIME_BB
+	 * col #6: BB_PLL_LOOP_FILTER
+	 */
+	static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
+
+		{   83, 87381,  0xB, 5, 0xF00,  3}, /* REF_FREQ_19_2*/
+		{   61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
+		{   41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
+		{   40, 0,      0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
+		{   47, 162280, 0xC, 6, 0x2760, 1}  /* REF_FREQ_33_6        */
+	};
+
+	/* read NVS params */
+	scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6);
+	wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
+
+	/* read ELP_CMD */
+	elp_cmd = wl12xx_reg_read32(wl, ELP_CMD);
+	wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
+
+	/* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
+	ref_freq = scr_pad6 & 0x000000FF;
+	wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
+
+	wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9);
+
+	/*
+	 * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
+	 */
+	wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6);
+
+	/*
+	 * set the clock detect feature to work in the restart wu procedure
+	 * (ELP_CFG_MODE[14]) and Select the clock source type
+	 * (ELP_CFG_MODE[13:12])
+	 */
+	tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
+	wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp);
+
+	/* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
+	elp_cmd |= 0x00000040;
+	wl12xx_reg_write32(wl, ELP_CMD, elp_cmd);
+
+	/* PG 1.2: Set the BB PLL stable time to be 1000usec
+	 * (PLL_STABLE_TIME) */
+	wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
+
+	/* PG 1.2: read clock request time */
+	init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME);
+
+	/*
+	 * PG 1.2: set the clock request time to be ref_clk_settling_time -
+	 * 1ms = 4ms
+	 */
+	if (init_data > 0x21)
+		tmp = init_data - 0x21;
+	else
+		tmp = 0;
+	wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp);
+
+	/* set BB PLL configurations in RF AFE */
+	wl12xx_reg_write32(wl, 0x003058cc, 0x4B5);
+
+	/* set RF_AFE_REG_5 */
+	wl12xx_reg_write32(wl, 0x003058d4, 0x50);
+
+	/* set RF_AFE_CTRL_REG_2 */
+	wl12xx_reg_write32(wl, 0x00305948, 0x11c001);
+
+	/*
+	 * change RF PLL and BB PLL divider for VCO clock and adjust VCO
+	 * bais current(RF_AFE_REG_13)
+	 */
+	wl12xx_reg_write32(wl, 0x003058f4, 0x1e);
+
+	/* set BB PLL configurations */
+	tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
+	wl12xx_reg_write32(wl, 0x00305840, tmp);
+
+	/* set fractional divider according to Appendix C-BB PLL
+	 * Calculations
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
+	wl12xx_reg_write32(wl, 0x00305844, tmp);
+
+	/* set the initial data for the sigma delta */
+	wl12xx_reg_write32(wl, 0x00305848, 0x3039);
+
+	/*
+	 * set the accumulator attenuation value, calibration loop1
+	 * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
+	 * the VCO gain
+	 */
+	tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
+		(LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
+	wl12xx_reg_write32(wl, 0x00305854, tmp);
+
+	/*
+	 * set the calibration stop time after holdoff time expires and set
+	 * settling time HOLD_OFF_TIME_BB
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
+	wl12xx_reg_write32(wl, 0x00305858, tmp);
+
+	/*
+	 * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
+	 * constant leakage current to linearize PFD to 0uA -
+	 * BB_ILOOPF[7:3]
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
+	wl12xx_reg_write32(wl, 0x003058f8, tmp);
+
+	/*
+	 * set regulator output voltage for n divider to
+	 * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
+	 * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
+	 * PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
+	 */
+	wl12xx_reg_write32(wl, 0x003058f0, 0x29);
+
+	/* enable restart wakeup sequence (ELP_CMD[0]) */
+	wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
+
+	/* restart sequence completed */
+	udelay(2000);
+
+	return 0;
+}
+
+int wl12xx_boot_run_firmware(struct wl12xx *wl)
+{
+	int loop, ret;
+	u32 chip_id, interrupt;
+
+	wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+	chip_id = wl12xx_reg_read32(wl, CHIP_ID_B);
+
+	wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+	if (chip_id != wl->chip.id) {
+		wl12xx_error("chip id doesn't match after firmware boot");
+		return -EIO;
+	}
+
+	/* wait for init to complete */
+	loop = 0;
+	while (loop++ < INIT_LOOP) {
+		udelay(INIT_LOOP_DELAY);
+		interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+
+		if (interrupt == 0xffffffff) {
+			wl12xx_error("error reading hardware complete "
+				     "init indication");
+			return -EIO;
+		}
+		/* check that ACX_INTR_INIT_COMPLETE is enabled */
+		else if (interrupt & wl->chip.intr_init_complete) {
+			wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+					   wl->chip.intr_init_complete);
+			break;
+		}
+	}
+
+	if (loop >= INIT_LOOP) {
+		wl12xx_error("timeout waiting for the hardware to "
+			     "complete initialization");
+		return -EIO;
+	}
+
+	/* get hardware config command mail box */
+	wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+
+	/* get hardware config event mail box */
+	wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+
+	/* set the working partition to its "running" mode offset */
+	wl12xx_set_partition(wl,
+			     wl->chip.p_table[PART_WORK].mem.start,
+			     wl->chip.p_table[PART_WORK].mem.size,
+			     wl->chip.p_table[PART_WORK].reg.start,
+			     wl->chip.p_table[PART_WORK].reg.size);
+
+	wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+		     wl->cmd_box_addr, wl->event_box_addr);
+
+	/*
+	 * in case of full asynchronous mode the firmware event must be
+	 * ready to receive event from the command mailbox
+	 */
+
+	/* enable gpio interrupts */
+	wl12xx_boot_enable_interrupts(wl);
+
+	wl->chip.op_target_enable_interrupts(wl);
+
+	/* unmask all mbox events  */
+	wl->event_mask = 0xffffffff;
+
+	ret = wl12xx_event_unmask(wl);
+	if (ret < 0) {
+		wl12xx_error("EVENT mask setting failed");
+		return ret;
+	}
+
+	wl12xx_event_mbox_config(wl);
+
+	/* firmware startup completed */
+	return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
new file mode 100644
index 00000000000..4fa73132baa
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wl12xx.h"
+
+int wl12xx_boot_soft_reset(struct wl12xx *wl);
+int wl12xx_boot_init_seq(struct wl12xx *wl);
+int wl12xx_boot_run_firmware(struct wl12xx *wl);
+void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl);
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
new file mode 100644
index 00000000000..f73ab602b7a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -0,0 +1,353 @@
+#include "cmd.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len)
+{
+	struct wl12xx_command cmd;
+	unsigned long timeout;
+	size_t cmd_len;
+	u32 intr;
+	int ret = 0;
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.id = type;
+	cmd.status = 0;
+	memcpy(cmd.parameters, buf, buf_len);
+	cmd_len = ALIGN(buf_len, 4) + CMDMBOX_HEADER_LEN;
+
+	wl12xx_ps_elp_wakeup(wl);
+
+	wl12xx_spi_mem_write(wl, wl->cmd_box_addr, &cmd, cmd_len);
+
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+	timeout = jiffies + msecs_to_jiffies(WL12XX_COMMAND_TIMEOUT);
+
+	intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	while (!(intr & wl->chip.intr_cmd_complete)) {
+		if (time_after(jiffies, timeout)) {
+			wl12xx_error("command complete timeout");
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+		msleep(1);
+
+		intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	}
+
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+			   wl->chip.intr_cmd_complete);
+
+out:
+	wl12xx_ps_elp_sleep(wl);
+
+	return ret;
+}
+
+int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer)
+{
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd test");
+
+	ret = wl12xx_cmd_send(wl, CMD_TEST, buf, buf_len);
+	if (ret < 0) {
+		wl12xx_warning("TEST command failed");
+		return ret;
+	}
+
+	if (answer) {
+		struct wl12xx_command *cmd_answer;
+
+		/*
+		 * The test command got in, we can read the answer.
+		 * The answer would be a wl12xx_command, where the
+		 * parameter array contains the actual answer.
+		 */
+
+		wl12xx_ps_elp_wakeup(wl);
+
+		wl12xx_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+		wl12xx_ps_elp_sleep(wl);
+
+		cmd_answer = buf;
+		if (cmd_answer->status != CMD_STATUS_SUCCESS)
+			wl12xx_error("TEST command answer error: %d",
+				     cmd_answer->status);
+	}
+
+	return 0;
+}
+
+
+int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
+			   void *answer)
+{
+	struct wl12xx_command *cmd;
+	struct acx_header header;
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd interrogate");
+
+	header.id = ie_id;
+	header.len = ie_len - sizeof(header);
+
+	ret = wl12xx_cmd_send(wl, CMD_INTERROGATE, &header, sizeof(header));
+	if (ret < 0) {
+		wl12xx_error("INTERROGATE command failed");
+		return ret;
+	}
+
+	wl12xx_ps_elp_wakeup(wl);
+
+	/* the interrogate command got in, we can read the answer */
+	wl12xx_spi_mem_read(wl, wl->cmd_box_addr, answer,
+			    CMDMBOX_HEADER_LEN + ie_len);
+
+	wl12xx_ps_elp_sleep(wl);
+
+	cmd = answer;
+	if (cmd->status != CMD_STATUS_SUCCESS)
+		wl12xx_error("INTERROGATE command error: %d",
+			     cmd->status);
+
+	return 0;
+
+}
+
+int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len)
+{
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd configure");
+
+	ret = wl12xx_cmd_send(wl, CMD_CONFIGURE, ie,
+			      ie_len);
+	if (ret < 0) {
+		wl12xx_warning("CONFIGURE command NOK");
+		return ret;
+	}
+
+	return 0;
+
+}
+
+int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
+		   void *bitmap, u16 bitmap_len, u8 bitmap_control)
+{
+	struct vbm_update_request vbm;
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd vbm");
+
+	/* Count and period will be filled by the target */
+	vbm.tim.bitmap_ctrl = bitmap_control;
+	if (bitmap_len > PARTIAL_VBM_MAX) {
+		wl12xx_warning("cmd vbm len is %d B, truncating to %d",
+			       bitmap_len, PARTIAL_VBM_MAX);
+		bitmap_len = PARTIAL_VBM_MAX;
+	}
+	memcpy(vbm.tim.pvb_field, bitmap, bitmap_len);
+	vbm.tim.identity = identity;
+	vbm.tim.length = bitmap_len + 3;
+
+	vbm.len = cpu_to_le16(bitmap_len + 5);
+
+	ret = wl12xx_cmd_send(wl, CMD_VBM, &vbm, sizeof(vbm));
+	if (ret < 0) {
+		wl12xx_error("VBM command failed");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable)
+{
+	int ret;
+	u16 cmd_rx, cmd_tx;
+
+	wl12xx_debug(DEBUG_CMD, "cmd data path");
+
+	if (enable) {
+		cmd_rx = CMD_ENABLE_RX;
+		cmd_tx = CMD_ENABLE_TX;
+	} else {
+		cmd_rx = CMD_DISABLE_RX;
+		cmd_tx = CMD_DISABLE_TX;
+	}
+
+	ret = wl12xx_cmd_send(wl, cmd_rx, &channel, sizeof(channel));
+	if (ret < 0) {
+		wl12xx_error("rx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		return ret;
+	}
+
+	wl12xx_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+	ret = wl12xx_cmd_send(wl, cmd_tx, &channel, sizeof(channel));
+	if (ret < 0) {
+		wl12xx_error("tx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		return ret;
+	}
+
+	wl12xx_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+	return 0;
+}
+
+int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+		    u16 beacon_interval, u8 wait)
+{
+	unsigned long timeout;
+	struct cmd_join join = {};
+	int ret, i;
+	u8 *bssid;
+
+	/* FIXME: this should be in main.c */
+	ret = wl12xx_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
+				     DEFAULT_HW_GEN_MODULATION_TYPE,
+				     wl->tx_mgmt_frm_rate,
+				     wl->tx_mgmt_frm_mod);
+	if (ret < 0)
+		return ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd join");
+
+	/* Reverse order BSSID */
+	bssid = (u8 *)&join.bssid_lsb;
+	for (i = 0; i < ETH_ALEN; i++)
+		bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+	join.rx_config_options = wl->rx_config;
+	join.rx_filter_options = wl->rx_filter;
+
+	join.basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+	join.beacon_interval = beacon_interval;
+	join.dtim_interval = dtim_interval;
+	join.bss_type = bss_type;
+	join.channel = wl->channel;
+	join.ctrl = JOIN_CMD_CTRL_TX_FLUSH;
+
+	ret = wl12xx_cmd_send(wl, CMD_START_JOIN, &join, sizeof(join));
+	if (ret < 0) {
+		wl12xx_error("failed to initiate cmd join");
+		return ret;
+	}
+
+	timeout = msecs_to_jiffies(JOIN_TIMEOUT);
+
+	/*
+	 * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
+	 * simplify locking we just sleep instead, for now
+	 */
+	if (wait)
+		msleep(10);
+
+	return 0;
+}
+
+int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode)
+{
+	int ret;
+	struct acx_ps_params ps_params;
+
+	/* FIXME: this should be in ps.c */
+	ret = wl12xx_acx_wake_up_conditions(wl, wl->listen_int);
+	if (ret < 0) {
+		wl12xx_error("Couldnt set wake up conditions");
+		return ret;
+	}
+
+	wl12xx_debug(DEBUG_CMD, "cmd set ps mode");
+
+	ps_params.ps_mode = ps_mode;
+	ps_params.send_null_data = 1;
+	ps_params.retries = 5;
+	ps_params.hang_over_period = 128;
+	ps_params.null_data_rate = 1; /* 1 Mbps */
+
+	ret = wl12xx_cmd_send(wl, CMD_SET_PS_MODE, &ps_params,
+			      sizeof(ps_params));
+	if (ret < 0) {
+		wl12xx_error("cmd set_ps_mode failed");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer)
+{
+	struct cmd_read_write_memory mem_cmd, *mem_answer;
+	struct wl12xx_command cmd;
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd read memory");
+
+	memset(&mem_cmd, 0, sizeof(mem_cmd));
+	mem_cmd.addr = addr;
+	mem_cmd.size = len;
+
+	ret = wl12xx_cmd_send(wl, CMD_READ_MEMORY, &mem_cmd, sizeof(mem_cmd));
+	if (ret < 0) {
+		wl12xx_error("read memory command failed: %d", ret);
+		return ret;
+	}
+
+	/* the read command got in, we can now read the answer */
+	wl12xx_spi_mem_read(wl, wl->cmd_box_addr, &cmd,
+			    CMDMBOX_HEADER_LEN + sizeof(mem_cmd));
+
+	if (cmd.status != CMD_STATUS_SUCCESS)
+		wl12xx_error("error in read command result: %d", cmd.status);
+
+	mem_answer = (struct cmd_read_write_memory *) cmd.parameters;
+	memcpy(answer, mem_answer->value, len);
+
+	return 0;
+}
+
+int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
+			    void *buf, size_t buf_len)
+{
+	struct wl12xx_cmd_packet_template template;
+	int ret;
+
+	wl12xx_debug(DEBUG_CMD, "cmd template %d", cmd_id);
+
+	memset(&template, 0, sizeof(template));
+
+	WARN_ON(buf_len > WL12XX_MAX_TEMPLATE_SIZE);
+	buf_len = min_t(size_t, buf_len, WL12XX_MAX_TEMPLATE_SIZE);
+	template.size = cpu_to_le16(buf_len);
+
+	if (buf)
+		memcpy(template.template, buf, buf_len);
+
+	ret = wl12xx_cmd_send(wl, cmd_id, &template,
+			      sizeof(template.size) + buf_len);
+	if (ret < 0) {
+		wl12xx_warning("cmd set_template failed: %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
new file mode 100644
index 00000000000..aa307dcd081
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -0,0 +1,265 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_CMD_H__
+#define __WL12XX_CMD_H__
+
+#include "wl12xx.h"
+
+int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len);
+int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer);
+int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
+			   void *answer);
+int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len);
+int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
+		   void *bitmap, u16 bitmap_len, u8 bitmap_control);
+int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable);
+int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+		    u16 beacon_interval, u8 wait);
+int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode);
+int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer);
+int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
+			    void *buf, size_t buf_len);
+
+/* unit ms */
+#define WL12XX_COMMAND_TIMEOUT 2000
+
+#define WL12XX_MAX_TEMPLATE_SIZE 300
+
+struct wl12xx_cmd_packet_template {
+	__le16 size;
+	u8 template[WL12XX_MAX_TEMPLATE_SIZE];
+} __attribute__ ((packed));
+
+enum wl12xx_commands {
+	CMD_RESET           = 0,
+	CMD_INTERROGATE     = 1,    /*use this to read information elements*/
+	CMD_CONFIGURE       = 2,    /*use this to write information elements*/
+	CMD_ENABLE_RX       = 3,
+	CMD_ENABLE_TX       = 4,
+	CMD_DISABLE_RX      = 5,
+	CMD_DISABLE_TX      = 6,
+	CMD_SCAN            = 8,
+	CMD_STOP_SCAN       = 9,
+	CMD_VBM             = 10,
+	CMD_START_JOIN      = 11,
+	CMD_SET_KEYS        = 12,
+	CMD_READ_MEMORY     = 13,
+	CMD_WRITE_MEMORY    = 14,
+	CMD_BEACON          = 19,
+	CMD_PROBE_RESP      = 20,
+	CMD_NULL_DATA       = 21,
+	CMD_PROBE_REQ       = 22,
+	CMD_TEST            = 23,
+	CMD_RADIO_CALIBRATE     = 25,   /* OBSOLETE */
+	CMD_ENABLE_RX_PATH      = 27,   /* OBSOLETE */
+	CMD_NOISE_HIST      = 28,
+	CMD_RX_RESET        = 29,
+	CMD_PS_POLL         = 30,
+	CMD_QOS_NULL_DATA   = 31,
+	CMD_LNA_CONTROL     = 32,
+	CMD_SET_BCN_MODE    = 33,
+	CMD_MEASUREMENT      = 34,
+	CMD_STOP_MEASUREMENT = 35,
+	CMD_DISCONNECT       = 36,
+	CMD_SET_PS_MODE      = 37,
+	CMD_CHANNEL_SWITCH   = 38,
+	CMD_STOP_CHANNEL_SWICTH = 39,
+	CMD_AP_DISCOVERY     = 40,
+	CMD_STOP_AP_DISCOVERY = 41,
+	CMD_SPS_SCAN = 42,
+	CMD_STOP_SPS_SCAN = 43,
+	CMD_HEALTH_CHECK     = 45,
+	CMD_DEBUG            = 46,
+	CMD_TRIGGER_SCAN_TO  = 47,
+
+	NUM_COMMANDS,
+	MAX_COMMAND_ID = 0xFFFF,
+};
+
+#define MAX_CMD_PARAMS 572
+
+struct  wl12xx_command {
+	u16 id;
+	u16 status;
+	u8  parameters[MAX_CMD_PARAMS];
+};
+
+enum {
+	CMD_MAILBOX_IDLE              		=  0,
+	CMD_STATUS_SUCCESS            		=  1,
+	CMD_STATUS_UNKNOWN_CMD        		=  2,
+	CMD_STATUS_UNKNOWN_IE         		=  3,
+	CMD_STATUS_REJECT_MEAS_SG_ACTIVE 	= 11,
+	CMD_STATUS_RX_BUSY            		= 13,
+	CMD_STATUS_INVALID_PARAM      		= 14,
+	CMD_STATUS_TEMPLATE_TOO_LARGE 		= 15,
+	CMD_STATUS_OUT_OF_MEMORY      		= 16,
+	CMD_STATUS_STA_TABLE_FULL     		= 17,
+	CMD_STATUS_RADIO_ERROR        		= 18,
+	CMD_STATUS_WRONG_NESTING      		= 19,
+	CMD_STATUS_TIMEOUT            		= 21, /* Driver internal use.*/
+	CMD_STATUS_FW_RESET           		= 22, /* Driver internal use.*/
+	MAX_COMMAND_STATUS            		= 0xff
+};
+
+
+/*
+ * CMD_READ_MEMORY
+ *
+ * The host issues this command to read the WiLink device memory/registers.
+ *
+ * Note: The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+/*
+ * CMD_WRITE_MEMORY
+ *
+ * The host issues this command to write the WiLink device memory/registers.
+ *
+ * The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+#define MAX_READ_SIZE 256
+
+struct cmd_read_write_memory {
+	/* The address of the memory to read from or write to.*/
+	u32 addr;
+
+	/* The amount of data in bytes to read from or write to the WiLink
+	 * device.*/
+	u32 size;
+
+	/* The actual value read from or written to the Wilink. The source
+	   of this field is the Host in WRITE command or the Wilink in READ
+	   command. */
+	u8 value[MAX_READ_SIZE];
+};
+
+#define CMDMBOX_HEADER_LEN 4
+#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
+
+
+struct basic_scan_parameters {
+	u32 rx_config_options;
+	u32 rx_filter_options;
+
+	/*
+	 * Scan options:
+	 * bit 0: When this bit is set, passive scan.
+	 * bit 1: Band, when this bit is set we scan
+	 * in the 5Ghz band.
+	 * bit 2: voice mode, 0 for normal scan.
+	 * bit 3: scan priority, 1 for high priority.
+	 */
+	u16 scan_options;
+
+	/* Number of channels to scan */
+	u8 num_channels;
+
+	/* Number opf probe requests to send, per channel */
+	u8 num_probe_requests;
+
+	/* Rate and modulation for probe requests */
+	u16 tx_rate;
+
+	u8 tid_trigger;
+	u8 ssid_len;
+	u32 ssid[8];
+
+} __attribute__ ((packed));
+
+struct basic_scan_channel_parameters {
+	u32 min_duration; /* in TU */
+	u32 max_duration; /* in TU */
+	u32 bssid_lsb;
+	u16 bssid_msb;
+
+	/*
+	 * bits 0-3: Early termination count.
+	 * bits 4-5: Early termination condition.
+	 */
+	u8 early_termination;
+
+	u8 tx_power_att;
+	u8 channel;
+	u8 pad[3];
+} __attribute__ ((packed));
+
+/* SCAN parameters */
+#define SCAN_MAX_NUM_OF_CHANNELS 16
+
+struct cmd_scan {
+	struct basic_scan_parameters params;
+	struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
+} __attribute__ ((packed));
+
+enum {
+	BSS_TYPE_IBSS = 0,
+	BSS_TYPE_STA_BSS = 2,
+	BSS_TYPE_AP_BSS = 3,
+	MAX_BSS_TYPE = 0xFF
+};
+
+#define JOIN_CMD_CTRL_TX_FLUSH             0x80 /* Firmware flushes all Tx */
+#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE  0x01 /* Early wakeup time */
+
+
+struct cmd_join {
+	u32 bssid_lsb;
+	u16 bssid_msb;
+	u16 beacon_interval; /* in TBTTs */
+	u32 rx_config_options;
+	u32 rx_filter_options;
+
+	/*
+	 * The target uses this field to determine the rate at
+	 * which to transmit control frame responses (such as
+	 * ACK or CTS frames).
+	 */
+	u16 basic_rate_set;
+	u8 dtim_interval;
+	u8 tx_ctrl_frame_rate; /* OBSOLETE */
+	u8 tx_ctrl_frame_mod;  /* OBSOLETE */
+	/*
+	 * bits 0-2: This bitwise field specifies the type
+	 * of BSS to start or join (BSS_TYPE_*).
+	 * bit 4: Band - The radio band in which to join
+	 * or start.
+	 *  0 - 2.4GHz band
+	 *  1 - 5GHz band
+	 * bits 3, 5-7: Reserved
+	 */
+	u8 bss_type;
+	u8 channel;
+	u8 ssid_len;
+	u8 ssid[IW_ESSID_MAX_SIZE];
+	u8 ctrl; /* JOIN_CMD_CTRL_* */
+	u8 tx_mgt_frame_rate; /* OBSOLETE */
+	u8 tx_mgt_frame_mod;  /* OBSOLETE */
+	u8 reserved;
+} __attribute__ ((packed));
+
+
+#endif /* __WL12XX_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
new file mode 100644
index 00000000000..cdb368ce4da
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -0,0 +1,508 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "debugfs.h"
+
+#include <linux/skbuff.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+
+/* ms */
+#define WL12XX_DEBUGFS_STATS_LIFETIME 1000
+
+/* debugfs macros idea from mac80211 */
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...)		\
+static ssize_t name## _read(struct file *file, char __user *userbuf,	\
+			    size_t count, loff_t *ppos)			\
+{									\
+	struct wl12xx *wl = file->private_data;				\
+	char buf[buflen];						\
+	int res;							\
+									\
+	res = scnprintf(buf, buflen, fmt "\n", ##value);		\
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+}									\
+									\
+static const struct file_operations name## _ops = {			\
+	.read = name## _read,						\
+	.open = wl12xx_open_file_generic,				\
+};
+
+#define DEBUGFS_ADD(name, parent)					\
+	wl->debugfs.name = debugfs_create_file(#name, 0400, parent,	\
+					       wl, &name## _ops);	\
+	if (IS_ERR(wl->debugfs.name)) {					\
+		ret = PTR_ERR(wl->debugfs.name);			\
+		wl->debugfs.name = NULL;				\
+		goto out;						\
+	}
+
+#define DEBUGFS_DEL(name)						\
+	do {								\
+		debugfs_remove(wl->debugfs.name);			\
+		wl->debugfs.name = NULL;				\
+	} while (0)
+
+#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt)			\
+static ssize_t sub## _ ##name## _read(struct file *file,		\
+				      char __user *userbuf,		\
+				      size_t count, loff_t *ppos)	\
+{									\
+	struct wl12xx *wl = file->private_data;				\
+	char buf[buflen];						\
+	int res;							\
+									\
+	wl12xx_debugfs_update_stats(wl);				\
+									\
+	res = scnprintf(buf, buflen, fmt "\n",				\
+			wl->stats.fw_stats->sub.name);			\
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+}									\
+									\
+static const struct file_operations sub## _ ##name## _ops = {		\
+	.read = sub## _ ##name## _read,					\
+	.open = wl12xx_open_file_generic,				\
+};
+
+#define DEBUGFS_FWSTATS_ADD(sub, name)				\
+	DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
+
+#define DEBUGFS_FWSTATS_DEL(sub, name)				\
+	DEBUGFS_DEL(sub## _ ##name)
+
+static void wl12xx_debugfs_update_stats(struct wl12xx *wl)
+{
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL12XX_STATE_ON &&
+	    time_after(jiffies, wl->stats.fw_stats_update +
+		       msecs_to_jiffies(WL12XX_DEBUGFS_STATS_LIFETIME))) {
+		wl12xx_acx_statistics(wl, wl->stats.fw_stats);
+		wl->stats.fw_stats_update = jiffies;
+	}
+
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl12xx_open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
+/* skipping wep.reserved */
+DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
+/* skipping cont_miss_bcns_spread for now */
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
+		     20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
+
+DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
+DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
+		      wl->stats.excessive_retries);
+
+static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	struct wl12xx *wl = file->private_data;
+	u32 queue_len;
+	char buf[20];
+	int res;
+
+	queue_len = skb_queue_len(&wl->tx_queue);
+
+	res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+static const struct file_operations tx_queue_len_ops = {
+	.read = tx_queue_len_read,
+	.open = wl12xx_open_file_generic,
+};
+
+static void wl12xx_debugfs_delete_files(struct wl12xx *wl)
+{
+	DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
+
+	DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
+	DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
+	DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
+	DEBUGFS_FWSTATS_DEL(rx, dropped);
+	DEBUGFS_FWSTATS_DEL(rx, fcs_err);
+	DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
+	DEBUGFS_FWSTATS_DEL(rx, path_reset);
+	DEBUGFS_FWSTATS_DEL(rx, reset_counter);
+
+	DEBUGFS_FWSTATS_DEL(dma, rx_requested);
+	DEBUGFS_FWSTATS_DEL(dma, rx_errors);
+	DEBUGFS_FWSTATS_DEL(dma, tx_requested);
+	DEBUGFS_FWSTATS_DEL(dma, tx_errors);
+
+	DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
+	DEBUGFS_FWSTATS_DEL(isr, fiqs);
+	DEBUGFS_FWSTATS_DEL(isr, rx_headers);
+	DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
+	DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
+	DEBUGFS_FWSTATS_DEL(isr, irqs);
+	DEBUGFS_FWSTATS_DEL(isr, tx_procs);
+	DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
+	DEBUGFS_FWSTATS_DEL(isr, dma0_done);
+	DEBUGFS_FWSTATS_DEL(isr, dma1_done);
+	DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
+	DEBUGFS_FWSTATS_DEL(isr, commands);
+	DEBUGFS_FWSTATS_DEL(isr, rx_procs);
+	DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
+	DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
+	DEBUGFS_FWSTATS_DEL(isr, pci_pm);
+	DEBUGFS_FWSTATS_DEL(isr, wakeups);
+	DEBUGFS_FWSTATS_DEL(isr, low_rssi);
+
+	DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
+	DEBUGFS_FWSTATS_DEL(wep, default_key_count);
+	/* skipping wep.reserved */
+	DEBUGFS_FWSTATS_DEL(wep, key_not_found);
+	DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
+	DEBUGFS_FWSTATS_DEL(wep, packets);
+	DEBUGFS_FWSTATS_DEL(wep, interrupt);
+
+	DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
+	DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
+	DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
+	DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
+	DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
+	DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
+	DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
+	DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
+	/* skipping cont_miss_bcns_spread for now */
+	DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
+
+	DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
+	DEBUGFS_FWSTATS_DEL(mic, calc_failure);
+
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
+
+	DEBUGFS_FWSTATS_DEL(event, heart_beat);
+	DEBUGFS_FWSTATS_DEL(event, calibration);
+	DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
+	DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
+	DEBUGFS_FWSTATS_DEL(event, rx_pool);
+	DEBUGFS_FWSTATS_DEL(event, oom_late);
+	DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
+	DEBUGFS_FWSTATS_DEL(event, tx_stuck);
+
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
+
+	DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
+	DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+	DEBUGFS_DEL(tx_queue_len);
+	DEBUGFS_DEL(retry_count);
+	DEBUGFS_DEL(excessive_retries);
+}
+
+static int wl12xx_debugfs_add_files(struct wl12xx *wl)
+{
+	int ret = 0;
+
+	DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
+
+	DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
+	DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
+	DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
+	DEBUGFS_FWSTATS_ADD(rx, dropped);
+	DEBUGFS_FWSTATS_ADD(rx, fcs_err);
+	DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
+	DEBUGFS_FWSTATS_ADD(rx, path_reset);
+	DEBUGFS_FWSTATS_ADD(rx, reset_counter);
+
+	DEBUGFS_FWSTATS_ADD(dma, rx_requested);
+	DEBUGFS_FWSTATS_ADD(dma, rx_errors);
+	DEBUGFS_FWSTATS_ADD(dma, tx_requested);
+	DEBUGFS_FWSTATS_ADD(dma, tx_errors);
+
+	DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
+	DEBUGFS_FWSTATS_ADD(isr, fiqs);
+	DEBUGFS_FWSTATS_ADD(isr, rx_headers);
+	DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
+	DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
+	DEBUGFS_FWSTATS_ADD(isr, irqs);
+	DEBUGFS_FWSTATS_ADD(isr, tx_procs);
+	DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
+	DEBUGFS_FWSTATS_ADD(isr, dma0_done);
+	DEBUGFS_FWSTATS_ADD(isr, dma1_done);
+	DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
+	DEBUGFS_FWSTATS_ADD(isr, commands);
+	DEBUGFS_FWSTATS_ADD(isr, rx_procs);
+	DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
+	DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
+	DEBUGFS_FWSTATS_ADD(isr, pci_pm);
+	DEBUGFS_FWSTATS_ADD(isr, wakeups);
+	DEBUGFS_FWSTATS_ADD(isr, low_rssi);
+
+	DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
+	DEBUGFS_FWSTATS_ADD(wep, default_key_count);
+	/* skipping wep.reserved */
+	DEBUGFS_FWSTATS_ADD(wep, key_not_found);
+	DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
+	DEBUGFS_FWSTATS_ADD(wep, packets);
+	DEBUGFS_FWSTATS_ADD(wep, interrupt);
+
+	DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
+	DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
+	DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
+	DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
+	DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
+	DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
+	DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
+	DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
+	/* skipping cont_miss_bcns_spread for now */
+	DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
+
+	DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
+	DEBUGFS_FWSTATS_ADD(mic, calc_failure);
+
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
+
+	DEBUGFS_FWSTATS_ADD(event, heart_beat);
+	DEBUGFS_FWSTATS_ADD(event, calibration);
+	DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
+	DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
+	DEBUGFS_FWSTATS_ADD(event, rx_pool);
+	DEBUGFS_FWSTATS_ADD(event, oom_late);
+	DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
+	DEBUGFS_FWSTATS_ADD(event, tx_stuck);
+
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
+
+	DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
+	DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+	DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
+	DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
+	DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
+
+out:
+	if (ret < 0)
+		wl12xx_debugfs_delete_files(wl);
+
+	return ret;
+}
+
+void wl12xx_debugfs_reset(struct wl12xx *wl)
+{
+	memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+	wl->stats.retry_count = 0;
+	wl->stats.excessive_retries = 0;
+}
+
+int wl12xx_debugfs_init(struct wl12xx *wl)
+{
+	int ret;
+
+	wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+	if (IS_ERR(wl->debugfs.rootdir)) {
+		ret = PTR_ERR(wl->debugfs.rootdir);
+		wl->debugfs.rootdir = NULL;
+		goto err;
+	}
+
+	wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
+						       wl->debugfs.rootdir);
+
+	if (IS_ERR(wl->debugfs.fw_statistics)) {
+		ret = PTR_ERR(wl->debugfs.fw_statistics);
+		wl->debugfs.fw_statistics = NULL;
+		goto err_root;
+	}
+
+	wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
+				      GFP_KERNEL);
+
+	if (!wl->stats.fw_stats) {
+		ret = -ENOMEM;
+		goto err_fw;
+	}
+
+	wl->stats.fw_stats_update = jiffies;
+
+	ret = wl12xx_debugfs_add_files(wl);
+
+	if (ret < 0)
+		goto err_file;
+
+	return 0;
+
+err_file:
+	kfree(wl->stats.fw_stats);
+	wl->stats.fw_stats = NULL;
+
+err_fw:
+	debugfs_remove(wl->debugfs.fw_statistics);
+	wl->debugfs.fw_statistics = NULL;
+
+err_root:
+	debugfs_remove(wl->debugfs.rootdir);
+	wl->debugfs.rootdir = NULL;
+
+err:
+	return ret;
+}
+
+void wl12xx_debugfs_exit(struct wl12xx *wl)
+{
+	wl12xx_debugfs_delete_files(wl);
+
+	kfree(wl->stats.fw_stats);
+	wl->stats.fw_stats = NULL;
+
+	debugfs_remove(wl->debugfs.fw_statistics);
+	wl->debugfs.fw_statistics = NULL;
+
+	debugfs_remove(wl->debugfs.rootdir);
+	wl->debugfs.rootdir = NULL;
+
+}
diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/wl12xx/debugfs.h
new file mode 100644
index 00000000000..562cdcbcc87
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef WL12XX_DEBUGFS_H
+#define WL12XX_DEBUGFS_H
+
+#include "wl12xx.h"
+
+int wl12xx_debugfs_init(struct wl12xx *wl);
+void wl12xx_debugfs_exit(struct wl12xx *wl);
+void wl12xx_debugfs_reset(struct wl12xx *wl);
+
+#endif /* WL12XX_DEBUGFS_H */
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
new file mode 100644
index 00000000000..99529ca89a7
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -0,0 +1,127 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "event.h"
+#include "ps.h"
+
+static int wl12xx_event_scan_complete(struct wl12xx *wl,
+				      struct event_mailbox *mbox)
+{
+	wl12xx_debug(DEBUG_EVENT, "status: 0x%x, channels: %d",
+		     mbox->scheduled_scan_status,
+		     mbox->scheduled_scan_channels);
+
+	if (wl->scanning) {
+		mutex_unlock(&wl->mutex);
+		ieee80211_scan_completed(wl->hw, false);
+		mutex_lock(&wl->mutex);
+		wl->scanning = false;
+	}
+
+	return 0;
+}
+
+static void wl12xx_event_mbox_dump(struct event_mailbox *mbox)
+{
+	wl12xx_debug(DEBUG_EVENT, "MBOX DUMP:");
+	wl12xx_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
+	wl12xx_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
+}
+
+static int wl12xx_event_process(struct wl12xx *wl, struct event_mailbox *mbox)
+{
+	int ret;
+	u32 vector;
+
+	wl12xx_event_mbox_dump(mbox);
+
+	vector = mbox->events_vector & ~(mbox->events_mask);
+	wl12xx_debug(DEBUG_EVENT, "vector: 0x%x", vector);
+
+	if (vector & SCAN_COMPLETE_EVENT_ID) {
+		ret = wl12xx_event_scan_complete(wl, mbox);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (vector & BSS_LOSE_EVENT_ID) {
+		wl12xx_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
+
+		if (wl->psm_requested && wl->psm) {
+			ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+int wl12xx_event_unmask(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_event_mbox_mask(wl, ~(wl->event_mask));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void wl12xx_event_mbox_config(struct wl12xx *wl)
+{
+	wl->mbox_ptr[0] = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+	wl12xx_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
+		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
+}
+
+int wl12xx_event_handle(struct wl12xx *wl, u8 mbox_num)
+{
+	struct event_mailbox mbox;
+	int ret;
+
+	wl12xx_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
+
+	if (mbox_num > 1)
+		return -EINVAL;
+
+	/* first we read the mbox descriptor */
+	wl12xx_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+			    sizeof(struct event_mailbox));
+
+	/* process the descriptor */
+	ret = wl12xx_event_process(wl, &mbox);
+	if (ret < 0)
+		return ret;
+
+	/* then we let the firmware know it can go on...*/
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+
+	return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
new file mode 100644
index 00000000000..1f4c2f7438a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -0,0 +1,121 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_EVENT_H__
+#define __WL12XX_EVENT_H__
+
+/*
+ * Mbox events
+ *
+ * The event mechanism is based on a pair of event buffers (buffers A and
+ * B) at fixed locations in the target's memory. The host processes one
+ * buffer while the other buffer continues to collect events. If the host
+ * is not processing events, an interrupt is issued to signal that a buffer
+ * is ready. Once the host is done with processing events from one buffer,
+ * it signals the target (with an ACK interrupt) that the event buffer is
+ * free.
+ */
+
+enum {
+	RESERVED1_EVENT_ID                       = BIT(0),
+	RESERVED2_EVENT_ID                       = BIT(1),
+	MEASUREMENT_START_EVENT_ID               = BIT(2),
+	SCAN_COMPLETE_EVENT_ID                   = BIT(3),
+	CALIBRATION_COMPLETE_EVENT_ID            = BIT(4),
+	ROAMING_TRIGGER_LOW_RSSI_EVENT_ID        = BIT(5),
+	PS_REPORT_EVENT_ID                       = BIT(6),
+	SYNCHRONIZATION_TIMEOUT_EVENT_ID         = BIT(7),
+	HEALTH_REPORT_EVENT_ID                   = BIT(8),
+	ACI_DETECTION_EVENT_ID                   = BIT(9),
+	DEBUG_REPORT_EVENT_ID                    = BIT(10),
+	MAC_STATUS_EVENT_ID                      = BIT(11),
+	DISCONNECT_EVENT_COMPLETE_ID             = BIT(12),
+	JOIN_EVENT_COMPLETE_ID                   = BIT(13),
+	CHANNEL_SWITCH_COMPLETE_EVENT_ID         = BIT(14),
+	BSS_LOSE_EVENT_ID                        = BIT(15),
+	ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID    = BIT(16),
+	MEASUREMENT_COMPLETE_EVENT_ID            = BIT(17),
+	AP_DISCOVERY_COMPLETE_EVENT_ID           = BIT(18),
+	SCHEDULED_SCAN_COMPLETE_EVENT_ID         = BIT(19),
+	PSPOLL_DELIVERY_FAILURE_EVENT_ID 	 = BIT(20),
+	RESET_BSS_EVENT_ID                       = BIT(21),
+	REGAINED_BSS_EVENT_ID                    = BIT(22),
+	ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID   = BIT(23),
+	ROAMING_TRIGGER_LOW_SNR_EVENT_ID         = BIT(24),
+	ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID    = BIT(25),
+
+	DBG_EVENT_ID                             = BIT(26),
+	BT_PTA_SENSE_EVENT_ID                    = BIT(27),
+	BT_PTA_PREDICTION_EVENT_ID               = BIT(28),
+	BT_PTA_AVALANCHE_EVENT_ID                = BIT(29),
+
+	PLT_RX_CALIBRATION_COMPLETE_EVENT_ID     = BIT(30),
+
+	EVENT_MBOX_ALL_EVENT_ID                  = 0x7fffffff,
+};
+
+struct event_debug_report {
+	u8 debug_event_id;
+	u8 num_params;
+	u16 pad;
+	u32 report_1;
+	u32 report_2;
+	u32 report_3;
+} __attribute__ ((packed));
+
+struct event_mailbox {
+	u32 events_vector;
+	u32 events_mask;
+	u32 reserved_1;
+	u32 reserved_2;
+
+	char average_rssi_level;
+	u8 ps_status;
+	u8 channel_switch_status;
+	u8 scheduled_scan_status;
+
+	/* Channels scanned by the scheduled scan */
+	u16 scheduled_scan_channels;
+
+	/* If bit 0 is set -> target's fatal error */
+	u16 health_report;
+	u16 bad_fft_counter;
+	u8 bt_pta_sense_info;
+	u8 bt_pta_protective_info;
+	u32 reserved;
+	u32 debug_report[2];
+
+	/* Number of FCS errors since last event */
+	u32 fcs_err_counter;
+
+	struct event_debug_report report;
+	u8 average_snr_level;
+	u8 padding[19];
+} __attribute__ ((packed));
+
+int wl12xx_event_unmask(struct wl12xx *wl);
+void wl12xx_event_mbox_config(struct wl12xx *wl);
+int wl12xx_event_handle(struct wl12xx *wl, u8 mbox);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
new file mode 100644
index 00000000000..2a573a6010b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -0,0 +1,200 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "init.h"
+#include "wl12xx_80211.h"
+#include "acx.h"
+#include "cmd.h"
+
+int wl12xx_hw_init_hwenc_config(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_feature_cfg(wl);
+	if (ret < 0) {
+		wl12xx_warning("couldn't set feature config");
+		return ret;
+	}
+
+	ret = wl12xx_acx_default_key(wl, wl->default_key);
+	if (ret < 0) {
+		wl12xx_warning("couldn't set default key");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_hw_init_templates_config(struct wl12xx *wl)
+{
+	int ret;
+	u8 partial_vbm[PARTIAL_VBM_MAX];
+
+	/* send empty templates for fw memory reservation */
+	ret = wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, NULL,
+				      sizeof(struct wl12xx_probe_req_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_NULL_DATA, NULL,
+				      sizeof(struct wl12xx_null_data_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_PS_POLL, NULL,
+				      sizeof(struct wl12xx_ps_poll_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL,
+				      sizeof
+				      (struct wl12xx_qos_null_data_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, NULL,
+				      sizeof
+				      (struct wl12xx_probe_resp_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_template_set(wl, CMD_BEACON, NULL,
+				      sizeof
+				      (struct wl12xx_beacon_template));
+	if (ret < 0)
+		return ret;
+
+	/* tim templates, first reserve space then allocate an empty one */
+	memset(partial_vbm, 0, PARTIAL_VBM_MAX);
+	ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter)
+{
+	int ret;
+
+	ret = wl12xx_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_rx_config(wl, config, filter);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_phy_config(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_pd_threshold(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_slot(wl, DEFAULT_SLOT_TIME);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_group_address_tbl(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_service_period_timeout(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_beacon_filter(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_beacon_filter_opt(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_beacon_filter_table(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_pta(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_sg_enable(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_acx_sg_cfg(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_energy_detection(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_cca_threshold(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl12xx_acx_bcn_dtim_options(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_hw_init_power_auth(struct wl12xx *wl)
+{
+	return wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
+}
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
new file mode 100644
index 00000000000..c8b6cd0b7c3
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_INIT_H__
+#define __WL12XX_INIT_H__
+
+#include "wl12xx.h"
+
+int wl12xx_hw_init_hwenc_config(struct wl12xx *wl);
+int wl12xx_hw_init_templates_config(struct wl12xx *wl);
+int wl12xx_hw_init_mem_config(struct wl12xx *wl);
+int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter);
+int wl12xx_hw_init_phy_config(struct wl12xx *wl);
+int wl12xx_hw_init_beacon_filter(struct wl12xx *wl);
+int wl12xx_hw_init_pta(struct wl12xx *wl);
+int wl12xx_hw_init_energy_detection(struct wl12xx *wl);
+int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl);
+int wl12xx_hw_init_power_auth(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
new file mode 100644
index 00000000000..603d6114882
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -0,0 +1,1358 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/spi/wl12xx.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "wl1251.h"
+#include "spi.h"
+#include "event.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+#include "debugfs.h"
+
+static void wl12xx_disable_interrupts(struct wl12xx *wl)
+{
+	disable_irq(wl->irq);
+}
+
+static void wl12xx_power_off(struct wl12xx *wl)
+{
+	wl->set_power(false);
+}
+
+static void wl12xx_power_on(struct wl12xx *wl)
+{
+	wl->set_power(true);
+}
+
+static irqreturn_t wl12xx_irq(int irq, void *cookie)
+{
+	struct wl12xx *wl;
+
+	wl12xx_debug(DEBUG_IRQ, "IRQ");
+
+	wl = cookie;
+
+	schedule_work(&wl->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static int wl12xx_fetch_firmware(struct wl12xx *wl)
+{
+	const struct firmware *fw;
+	int ret;
+
+	ret = request_firmware(&fw, wl->chip.fw_filename, &wl->spi->dev);
+
+	if (ret < 0) {
+		wl12xx_error("could not get firmware: %d", ret);
+		return ret;
+	}
+
+	if (fw->size % 4) {
+		wl12xx_error("firmware size is not multiple of 32 bits: %zu",
+			     fw->size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	wl->fw_len = fw->size;
+	wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+
+	if (!wl->fw) {
+		wl12xx_error("could not allocate memory for the firmware");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(wl->fw, fw->data, wl->fw_len);
+
+	ret = 0;
+
+out:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int wl12xx_fetch_nvs(struct wl12xx *wl)
+{
+	const struct firmware *fw;
+	int ret;
+
+	ret = request_firmware(&fw, wl->chip.nvs_filename, &wl->spi->dev);
+
+	if (ret < 0) {
+		wl12xx_error("could not get nvs file: %d", ret);
+		return ret;
+	}
+
+	if (fw->size % 4) {
+		wl12xx_error("nvs size is not multiple of 32 bits: %zu",
+			     fw->size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	wl->nvs_len = fw->size;
+	wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+
+	if (!wl->nvs) {
+		wl12xx_error("could not allocate memory for the nvs file");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(wl->nvs, fw->data, wl->nvs_len);
+
+	ret = 0;
+
+out:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static void wl12xx_fw_wakeup(struct wl12xx *wl)
+{
+	u32 elp_reg;
+
+	elp_reg = ELPCTRL_WAKE_UP;
+	wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+	elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+	if (!(elp_reg & ELPCTRL_WLAN_READY)) {
+		wl12xx_warning("WLAN not ready");
+		elp_reg = ELPCTRL_WAKE_UP_WLAN_READY;
+		wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+	}
+}
+
+static int wl12xx_chip_wakeup(struct wl12xx *wl)
+{
+	int ret = 0;
+
+	wl12xx_power_on(wl);
+	msleep(wl->chip.power_on_sleep);
+	wl12xx_spi_reset(wl);
+	wl12xx_spi_init(wl);
+
+	/* We don't need a real memory partition here, because we only want
+	 * to use the registers at this point. */
+	wl12xx_set_partition(wl,
+			     0x00000000,
+			     0x00000000,
+			     REGISTERS_BASE,
+			     REGISTERS_DOWN_SIZE);
+
+	/* ELP module wake up */
+	wl12xx_fw_wakeup(wl);
+
+	/* whal_FwCtrl_BootSm() */
+
+	/* 0. read chip id from CHIP_ID */
+	wl->chip.id = wl12xx_reg_read32(wl, CHIP_ID_B);
+
+	/* 1. check if chip id is valid */
+
+	switch (wl->chip.id) {
+	case CHIP_ID_1251_PG12:
+		wl12xx_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
+			     wl->chip.id);
+
+		wl1251_setup(wl);
+
+		break;
+	case CHIP_ID_1271_PG10:
+	case CHIP_ID_1251_PG10:
+	case CHIP_ID_1251_PG11:
+	default:
+		wl12xx_error("unsupported chip id: 0x%x", wl->chip.id);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (wl->fw == NULL) {
+		ret = wl12xx_fetch_firmware(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+	/* No NVS from netlink, try to get it from the filesystem */
+	if (wl->nvs == NULL) {
+		ret = wl12xx_fetch_nvs(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void wl12xx_filter_work(struct work_struct *work)
+{
+	struct wl12xx *wl =
+		container_of(work, struct wl12xx, filter_work);
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL12XX_STATE_OFF)
+		goto out;
+
+	ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+	if (ret < 0)
+		goto out;
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+int wl12xx_plt_start(struct wl12xx *wl)
+{
+	int ret;
+
+	wl12xx_notice("power up");
+
+	if (wl->state != WL12XX_STATE_OFF) {
+		wl12xx_error("cannot go into PLT state because not "
+			     "in off state: %d", wl->state);
+		return -EBUSY;
+	}
+
+	wl->state = WL12XX_STATE_PLT;
+
+	ret = wl12xx_chip_wakeup(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl->chip.op_boot(wl);
+	if (ret < 0)
+		return ret;
+
+	wl12xx_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
+
+	ret = wl->chip.op_plt_init(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl12xx_plt_stop(struct wl12xx *wl)
+{
+	wl12xx_notice("power down");
+
+	if (wl->state != WL12XX_STATE_PLT) {
+		wl12xx_error("cannot power down because not in PLT "
+			     "state: %d", wl->state);
+		return -EBUSY;
+	}
+
+	wl12xx_disable_interrupts(wl);
+	wl12xx_power_off(wl);
+
+	wl->state = WL12XX_STATE_OFF;
+
+	return 0;
+}
+
+
+static int wl12xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct wl12xx *wl = hw->priv;
+
+	skb_queue_tail(&wl->tx_queue, skb);
+
+	schedule_work(&wl->tx_work);
+
+	/*
+	 * The workqueue is slow to process the tx_queue and we need stop
+	 * the queue here, otherwise the queue will get too long.
+	 */
+	if (skb_queue_len(&wl->tx_queue) >= WL12XX_TX_QUEUE_MAX_LENGTH) {
+		ieee80211_stop_queues(wl->hw);
+
+		/*
+		 * FIXME: this is racy, the variable is not properly
+		 * protected. Maybe fix this by removing the stupid
+		 * variable altogether and checking the real queue state?
+		 */
+		wl->tx_queue_stopped = true;
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static int wl12xx_op_start(struct ieee80211_hw *hw)
+{
+	struct wl12xx *wl = hw->priv;
+	int ret = 0;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 start");
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state != WL12XX_STATE_OFF) {
+		wl12xx_error("cannot start because not in off state: %d",
+			     wl->state);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = wl12xx_chip_wakeup(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl->chip.op_boot(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl->chip.op_hw_init(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl12xx_acx_station_id(wl);
+	if (ret < 0)
+		goto out;
+
+	wl->state = WL12XX_STATE_ON;
+
+	wl12xx_info("firmware booted (%s)", wl->chip.fw_ver);
+
+out:
+	if (ret < 0)
+		wl12xx_power_off(wl);
+
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static void wl12xx_op_stop(struct ieee80211_hw *hw)
+{
+	struct wl12xx *wl = hw->priv;
+
+	wl12xx_info("down");
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 stop");
+
+	mutex_lock(&wl->mutex);
+
+	WARN_ON(wl->state != WL12XX_STATE_ON);
+
+	if (wl->scanning) {
+		mutex_unlock(&wl->mutex);
+		ieee80211_scan_completed(wl->hw, true);
+		mutex_lock(&wl->mutex);
+		wl->scanning = false;
+	}
+
+	wl->state = WL12XX_STATE_OFF;
+
+	wl12xx_disable_interrupts(wl);
+
+	mutex_unlock(&wl->mutex);
+
+	cancel_work_sync(&wl->irq_work);
+	cancel_work_sync(&wl->tx_work);
+	cancel_work_sync(&wl->filter_work);
+
+	mutex_lock(&wl->mutex);
+
+	/* let's notify MAC80211 about the remaining pending TX frames */
+	wl12xx_tx_flush(wl);
+
+	wl12xx_power_off(wl);
+
+	memset(wl->bssid, 0, ETH_ALEN);
+	wl->listen_int = 1;
+	wl->bss_type = MAX_BSS_TYPE;
+
+	wl->data_in_count = 0;
+	wl->rx_counter = 0;
+	wl->rx_handled = 0;
+	wl->rx_current_buffer = 0;
+	wl->rx_last_id = 0;
+	wl->next_tx_complete = 0;
+	wl->elp = false;
+	wl->psm = 0;
+	wl->tx_queue_stopped = false;
+	wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
+
+	wl12xx_debugfs_reset(wl);
+
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl12xx_op_add_interface(struct ieee80211_hw *hw,
+				   struct ieee80211_if_init_conf *conf)
+{
+	struct wl12xx *wl = hw->priv;
+	DECLARE_MAC_BUF(mac);
+	int ret = 0;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %s",
+		     conf->type, print_mac(mac, conf->mac_addr));
+
+	mutex_lock(&wl->mutex);
+
+	switch (conf->type) {
+	case NL80211_IFTYPE_STATION:
+		wl->bss_type = BSS_TYPE_STA_BSS;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		wl->bss_type = BSS_TYPE_IBSS;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
+		memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+		SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+		ret = wl12xx_acx_station_id(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+static void wl12xx_op_remove_interface(struct ieee80211_hw *hw,
+					 struct ieee80211_if_init_conf *conf)
+{
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 remove interface");
+}
+
+static int wl12xx_build_null_data(struct wl12xx *wl)
+{
+	struct wl12xx_null_data_template template;
+
+	if (!is_zero_ether_addr(wl->bssid)) {
+		memcpy(template.header.da, wl->bssid, ETH_ALEN);
+		memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
+	} else {
+		memset(template.header.da, 0xff, ETH_ALEN);
+		memset(template.header.bssid, 0xff, ETH_ALEN);
+	}
+
+	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+	template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
+						IEEE80211_STYPE_NULLFUNC);
+
+	return wl12xx_cmd_template_set(wl, CMD_NULL_DATA, &template,
+				       sizeof(template));
+
+}
+
+static int wl12xx_build_ps_poll(struct wl12xx *wl, u16 aid)
+{
+	struct wl12xx_ps_poll_template template;
+
+	memcpy(template.bssid, wl->bssid, ETH_ALEN);
+	memcpy(template.ta, wl->mac_addr, ETH_ALEN);
+	template.aid = aid;
+	template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+
+	return wl12xx_cmd_template_set(wl, CMD_PS_POLL, &template,
+				       sizeof(template));
+
+}
+
+static int wl12xx_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct wl12xx *wl = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	int channel, ret = 0;
+
+	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+		     channel,
+		     conf->flags & IEEE80211_CONF_PS ? "on" : "off",
+		     conf->power_level);
+
+	mutex_lock(&wl->mutex);
+
+	if (channel != wl->channel) {
+		/* FIXME: use beacon interval provided by mac80211 */
+		ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+		if (ret < 0)
+			goto out;
+
+		wl->channel = channel;
+	}
+
+	ret = wl12xx_build_null_data(wl);
+	if (ret < 0)
+		goto out;
+
+	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
+		wl12xx_info("psm enabled");
+
+		wl->psm_requested = true;
+
+		/*
+		 * We enter PSM only if we're already associated.
+		 * If we're not, we'll enter it when joining an SSID,
+		 * through the bss_info_changed() hook.
+		 */
+		ret = wl12xx_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
+		   wl->psm_requested) {
+		wl12xx_info("psm disabled");
+
+		wl->psm_requested = false;
+
+		if (wl->psm)
+			ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
+	}
+
+	if (conf->power_level != wl->power_level) {
+		ret = wl12xx_acx_tx_power(wl, conf->power_level);
+		if (ret < 0)
+			goto out;
+
+		wl->power_level = conf->power_level;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+#define WL12XX_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
+				  FIF_ALLMULTI | \
+				  FIF_FCSFAIL | \
+				  FIF_BCN_PRBRESP_PROMISC | \
+				  FIF_CONTROL | \
+				  FIF_OTHER_BSS)
+
+static void wl12xx_op_configure_filter(struct ieee80211_hw *hw,
+				       unsigned int changed,
+				       unsigned int *total,
+				       int mc_count,
+				       struct dev_addr_list *mc_list)
+{
+	struct wl12xx *wl = hw->priv;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 configure filter");
+
+	*total &= WL12XX_SUPPORTED_FILTERS;
+	changed &= WL12XX_SUPPORTED_FILTERS;
+
+	if (changed == 0)
+		/* no filters which we support changed */
+		return;
+
+	/* FIXME: wl->rx_config and wl->rx_filter are not protected */
+
+	wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
+	wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
+
+	if (*total & FIF_PROMISC_IN_BSS) {
+		wl->rx_config |= CFG_BSSID_FILTER_EN;
+		wl->rx_config |= CFG_RX_ALL_GOOD;
+	}
+	if (*total & FIF_ALLMULTI)
+		/*
+		 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
+		 * all multicast frames
+		 */
+		wl->rx_config &= ~CFG_MC_FILTER_EN;
+	if (*total & FIF_FCSFAIL)
+		wl->rx_filter |= CFG_RX_FCS_ERROR;
+	if (*total & FIF_BCN_PRBRESP_PROMISC) {
+		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+		wl->rx_config &= ~CFG_SSID_FILTER_EN;
+	}
+	if (*total & FIF_CONTROL)
+		wl->rx_filter |= CFG_RX_CTL_EN;
+	if (*total & FIF_OTHER_BSS)
+		wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+
+	/*
+	 * FIXME: workqueues need to be properly cancelled on stop(), for
+	 * now let's just disable changing the filter settings. They will
+	 * be updated any on config().
+	 */
+	/* schedule_work(&wl->filter_work); */
+}
+
+/* HW encryption */
+static int wl12xx_set_key_type(struct wl12xx *wl, struct acx_set_key *key,
+			       enum set_key_cmd cmd,
+			       struct ieee80211_key_conf *mac80211_key,
+			       const u8 *addr)
+{
+	switch (mac80211_key->alg) {
+	case ALG_WEP:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_WEP_DEFAULT;
+		else
+			key->key_type = KEY_WEP_ADDR;
+
+		mac80211_key->hw_key_idx = mac80211_key->keyidx;
+		break;
+	case ALG_TKIP:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_TKIP_MIC_GROUP;
+		else
+			key->key_type = KEY_TKIP_MIC_PAIRWISE;
+
+		mac80211_key->hw_key_idx = mac80211_key->keyidx;
+		break;
+	case ALG_CCMP:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_AES_GROUP;
+		else
+			key->key_type = KEY_AES_PAIRWISE;
+		mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		break;
+	default:
+		wl12xx_error("Unknown key algo 0x%x", mac80211_key->alg);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int wl12xx_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_sta *sta,
+			     struct ieee80211_key_conf *key)
+{
+	struct wl12xx *wl = hw->priv;
+	struct acx_set_key wl_key;
+	const u8 *addr;
+	int ret;
+
+	static const u8 bcast_addr[ETH_ALEN] =
+		{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 set key");
+
+	memset(&wl_key, 0, sizeof(wl_key));
+
+	addr = sta ? sta->addr : bcast_addr;
+
+	wl12xx_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
+	wl12xx_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
+	wl12xx_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
+		     key->alg, key->keyidx, key->keylen, key->flags);
+	wl12xx_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
+
+	mutex_lock(&wl->mutex);
+
+	switch (cmd) {
+	case SET_KEY:
+		wl_key.key_action = KEY_ADD_OR_REPLACE;
+		break;
+	case DISABLE_KEY:
+		wl_key.key_action = KEY_REMOVE;
+		break;
+	default:
+		wl12xx_error("Unsupported key cmd 0x%x", cmd);
+		break;
+	}
+
+	ret = wl12xx_set_key_type(wl, &wl_key, cmd, key, addr);
+	if (ret < 0) {
+		wl12xx_error("Set KEY type failed");
+		goto out;
+	}
+
+	if (wl_key.key_type != KEY_WEP_DEFAULT)
+		memcpy(wl_key.addr, addr, ETH_ALEN);
+
+	if ((wl_key.key_type == KEY_TKIP_MIC_GROUP) ||
+	    (wl_key.key_type == KEY_TKIP_MIC_PAIRWISE)) {
+		/*
+		 * We get the key in the following form:
+		 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
+		 * but the target is expecting:
+		 * TKIP - RX MIC - TX MIC
+		 */
+		memcpy(wl_key.key, key->key, 16);
+		memcpy(wl_key.key + 16, key->key + 24, 8);
+		memcpy(wl_key.key + 24, key->key + 16, 8);
+
+	} else {
+		memcpy(wl_key.key, key->key, key->keylen);
+	}
+	wl_key.key_size = key->keylen;
+
+	wl_key.id = key->keyidx;
+	wl_key.ssid_profile = 0;
+
+	wl12xx_dump(DEBUG_CRYPT, "TARGET KEY: ", &wl_key, sizeof(wl_key));
+
+	if (wl12xx_cmd_send(wl, CMD_SET_KEYS, &wl_key, sizeof(wl_key)) < 0) {
+		wl12xx_error("Set KEY failed");
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+static int wl12xx_build_basic_rates(char *rates)
+{
+	u8 index = 0;
+
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+
+	return index;
+}
+
+static int wl12xx_build_extended_rates(char *rates)
+{
+	u8 index = 0;
+
+	rates[index++] = IEEE80211_OFDM_RATE_6MB;
+	rates[index++] = IEEE80211_OFDM_RATE_9MB;
+	rates[index++] = IEEE80211_OFDM_RATE_12MB;
+	rates[index++] = IEEE80211_OFDM_RATE_18MB;
+	rates[index++] = IEEE80211_OFDM_RATE_24MB;
+	rates[index++] = IEEE80211_OFDM_RATE_36MB;
+	rates[index++] = IEEE80211_OFDM_RATE_48MB;
+	rates[index++] = IEEE80211_OFDM_RATE_54MB;
+
+	return index;
+}
+
+
+static int wl12xx_build_probe_req(struct wl12xx *wl, u8 *ssid, size_t ssid_len)
+{
+	struct wl12xx_probe_req_template template;
+	struct wl12xx_ie_rates *rates;
+	char *ptr;
+	u16 size;
+
+	ptr = (char *)&template;
+	size = sizeof(struct ieee80211_header);
+
+	memset(template.header.da, 0xff, ETH_ALEN);
+	memset(template.header.bssid, 0xff, ETH_ALEN);
+	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+	template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+
+	/* IEs */
+	/* SSID */
+	template.ssid.header.id = WLAN_EID_SSID;
+	template.ssid.header.len = ssid_len;
+	if (ssid_len && ssid)
+		memcpy(template.ssid.ssid, ssid, ssid_len);
+	size += sizeof(struct wl12xx_ie_header) + ssid_len;
+	ptr += size;
+
+	/* Basic Rates */
+	rates = (struct wl12xx_ie_rates *)ptr;
+	rates->header.id = WLAN_EID_SUPP_RATES;
+	rates->header.len = wl12xx_build_basic_rates(rates->rates);
+	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+	ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+	/* Extended rates */
+	rates = (struct wl12xx_ie_rates *)ptr;
+	rates->header.id = WLAN_EID_EXT_SUPP_RATES;
+	rates->header.len = wl12xx_build_extended_rates(rates->rates);
+	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+	wl12xx_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
+
+	return wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, &template,
+				      size);
+}
+
+static int wl12xx_hw_scan(struct wl12xx *wl, u8 *ssid, size_t len,
+			  u8 active_scan, u8 high_prio, u8 num_channels,
+			  u8 probe_requests)
+{
+	int i, ret;
+	u32 split_scan = 0;
+	u16 scan_options = 0;
+	struct cmd_scan *params;
+	struct wl12xx_command *cmd_answer;
+
+	if (wl->scanning)
+		return -EINVAL;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+	params->params.rx_filter_options =
+		cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
+
+	/* High priority scan */
+	if (!active_scan)
+		scan_options |= SCAN_PASSIVE;
+	if (high_prio)
+		scan_options |= SCAN_PRIORITY_HIGH;
+	params->params.scan_options = scan_options;
+
+	params->params.num_channels = num_channels;
+	params->params.num_probe_requests = probe_requests;
+	params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
+	params->params.tid_trigger = 0;
+
+	for (i = 0; i < num_channels; i++) {
+		params->channels[i].min_duration = cpu_to_le32(30000);
+		params->channels[i].max_duration = cpu_to_le32(60000);
+		memset(&params->channels[i].bssid_lsb, 0xff, 4);
+		memset(&params->channels[i].bssid_msb, 0xff, 2);
+		params->channels[i].early_termination = 0;
+		params->channels[i].tx_power_att = 0;
+		params->channels[i].channel = i + 1;
+		memset(params->channels[i].pad, 0, 3);
+	}
+
+	for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++)
+		memset(&params->channels[i], 0,
+		       sizeof(struct basic_scan_channel_parameters));
+
+	if (len && ssid) {
+		params->params.ssid_len = len;
+		memcpy(params->params.ssid, ssid, len);
+	} else {
+		params->params.ssid_len = 0;
+		memset(params->params.ssid, 0, 32);
+	}
+
+	ret = wl12xx_build_probe_req(wl, ssid, len);
+	if (ret < 0) {
+		wl12xx_error("PROBE request template failed");
+		goto out;
+	}
+
+	ret = wl12xx_cmd_send(wl, CMD_TRIGGER_SCAN_TO, &split_scan,
+			      sizeof(u32));
+	if (ret < 0) {
+		wl12xx_error("Split SCAN failed");
+		goto out;
+	}
+
+	wl12xx_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
+
+	wl->scanning = true;
+
+	ret = wl12xx_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
+	if (ret < 0)
+		wl12xx_error("SCAN failed");
+
+	wl12xx_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
+
+	cmd_answer = (struct wl12xx_command *) params;
+	if (cmd_answer->status != CMD_STATUS_SUCCESS) {
+		wl12xx_error("TEST command answer error: %d",
+			     cmd_answer->status);
+		wl->scanning = false;
+		ret = -EIO;
+		goto out;
+	}
+
+out:
+	kfree(params);
+	return ret;
+
+}
+
+static int wl12xx_op_hw_scan(struct ieee80211_hw *hw,
+			     struct cfg80211_scan_request *req)
+{
+	struct wl12xx *wl = hw->priv;
+	int ret;
+	u8 *ssid = NULL;
+	size_t ssid_len = 0;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 hw scan");
+
+	if (req->n_ssids) {
+		ssid = req->ssids[0].ssid;
+		ssid_len = req->ssids[0].ssid_len;
+	}
+
+	mutex_lock(&wl->mutex);
+	ret = wl12xx_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static int wl12xx_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct wl12xx *wl = hw->priv;
+	int ret;
+
+	ret = wl12xx_acx_rts_threshold(wl, (u16) value);
+
+	if (ret < 0)
+		wl12xx_warning("wl12xx_op_set_rts_threshold failed: %d", ret);
+
+	return ret;
+}
+
+static void wl12xx_op_bss_info_changed(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       struct ieee80211_bss_conf *bss_conf,
+				       u32 changed)
+{
+	enum acx_ps_mode mode;
+	struct wl12xx *wl = hw->priv;
+	struct sk_buff *beacon;
+	int ret;
+
+	wl12xx_debug(DEBUG_MAC80211, "mac80211 bss info changed");
+
+	mutex_lock(&wl->mutex);
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (bss_conf->assoc) {
+			wl->aid = bss_conf->aid;
+
+			ret = wl12xx_build_ps_poll(wl, wl->aid);
+			if (ret < 0)
+				goto out;
+
+			ret = wl12xx_acx_aid(wl, wl->aid);
+			if (ret < 0)
+				goto out;
+
+			/* If we want to go in PSM but we're not there yet */
+			if (wl->psm_requested && !wl->psm) {
+				mode = STATION_POWER_SAVE_MODE;
+				ret = wl12xx_ps_set_mode(wl, mode);
+				if (ret < 0)
+					goto out;
+			}
+		}
+	}
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		if (bss_conf->use_short_slot)
+			ret = wl12xx_acx_slot(wl, SLOT_TIME_SHORT);
+		else
+			ret = wl12xx_acx_slot(wl, SLOT_TIME_LONG);
+		if (ret < 0) {
+			wl12xx_warning("Set slot time failed %d", ret);
+			goto out;
+		}
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		if (bss_conf->use_short_preamble)
+			wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
+		else
+			wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
+	}
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		if (bss_conf->use_cts_prot)
+			ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_ENABLE);
+		else
+			ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_DISABLE);
+		if (ret < 0) {
+			wl12xx_warning("Set ctsprotect failed %d", ret);
+			goto out;
+		}
+	}
+
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+
+		ret = wl12xx_build_null_data(wl);
+		if (ret < 0)
+			goto out;
+
+		if (wl->bss_type != BSS_TYPE_IBSS) {
+			ret = wl12xx_cmd_join(wl, wl->bss_type, 5, 100, 1);
+			if (ret < 0)
+				goto out;
+		}
+	}
+
+	if (changed & BSS_CHANGED_BEACON) {
+		beacon = ieee80211_beacon_get(hw, vif);
+		ret = wl12xx_cmd_template_set(wl, CMD_BEACON, beacon->data,
+					      beacon->len);
+
+		if (ret < 0) {
+			dev_kfree_skb(beacon);
+			goto out;
+		}
+
+		ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
+					      beacon->len);
+
+		dev_kfree_skb(beacon);
+
+		if (ret < 0)
+			goto out;
+
+		ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_rate wl12xx_rates[] = {
+	{ .bitrate = 10,
+	  .hw_value = 0x1,
+	  .hw_value_short = 0x1, },
+	{ .bitrate = 20,
+	  .hw_value = 0x2,
+	  .hw_value_short = 0x2,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55,
+	  .hw_value = 0x4,
+	  .hw_value_short = 0x4,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110,
+	  .hw_value = 0x20,
+	  .hw_value_short = 0x20,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 60,
+	  .hw_value = 0x8,
+	  .hw_value_short = 0x8, },
+	{ .bitrate = 90,
+	  .hw_value = 0x10,
+	  .hw_value_short = 0x10, },
+	{ .bitrate = 120,
+	  .hw_value = 0x40,
+	  .hw_value_short = 0x40, },
+	{ .bitrate = 180,
+	  .hw_value = 0x80,
+	  .hw_value_short = 0x80, },
+	{ .bitrate = 240,
+	  .hw_value = 0x200,
+	  .hw_value_short = 0x200, },
+	{ .bitrate = 360,
+	 .hw_value = 0x400,
+	 .hw_value_short = 0x400, },
+	{ .bitrate = 480,
+	  .hw_value = 0x800,
+	  .hw_value_short = 0x800, },
+	{ .bitrate = 540,
+	  .hw_value = 0x1000,
+	  .hw_value_short = 0x1000, },
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_channel wl12xx_channels[] = {
+	{ .hw_value = 1, .center_freq = 2412},
+	{ .hw_value = 2, .center_freq = 2417},
+	{ .hw_value = 3, .center_freq = 2422},
+	{ .hw_value = 4, .center_freq = 2427},
+	{ .hw_value = 5, .center_freq = 2432},
+	{ .hw_value = 6, .center_freq = 2437},
+	{ .hw_value = 7, .center_freq = 2442},
+	{ .hw_value = 8, .center_freq = 2447},
+	{ .hw_value = 9, .center_freq = 2452},
+	{ .hw_value = 10, .center_freq = 2457},
+	{ .hw_value = 11, .center_freq = 2462},
+	{ .hw_value = 12, .center_freq = 2467},
+	{ .hw_value = 13, .center_freq = 2472},
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_supported_band wl12xx_band_2ghz = {
+	.channels = wl12xx_channels,
+	.n_channels = ARRAY_SIZE(wl12xx_channels),
+	.bitrates = wl12xx_rates,
+	.n_bitrates = ARRAY_SIZE(wl12xx_rates),
+};
+
+static const struct ieee80211_ops wl12xx_ops = {
+	.start = wl12xx_op_start,
+	.stop = wl12xx_op_stop,
+	.add_interface = wl12xx_op_add_interface,
+	.remove_interface = wl12xx_op_remove_interface,
+	.config = wl12xx_op_config,
+	.configure_filter = wl12xx_op_configure_filter,
+	.tx = wl12xx_op_tx,
+	.set_key = wl12xx_op_set_key,
+	.hw_scan = wl12xx_op_hw_scan,
+	.bss_info_changed = wl12xx_op_bss_info_changed,
+	.set_rts_threshold = wl12xx_op_set_rts_threshold,
+};
+
+static int wl12xx_register_hw(struct wl12xx *wl)
+{
+	int ret;
+
+	if (wl->mac80211_registered)
+		return 0;
+
+	SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+
+	ret = ieee80211_register_hw(wl->hw);
+	if (ret < 0) {
+		wl12xx_error("unable to register mac80211 hw: %d", ret);
+		return ret;
+	}
+
+	wl->mac80211_registered = true;
+
+	wl12xx_notice("loaded");
+
+	return 0;
+}
+
+static int wl12xx_init_ieee80211(struct wl12xx *wl)
+{
+	/* The tx descriptor buffer and the TKIP space */
+	wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
+		+ WL12XX_TKIP_IV_SPACE;
+
+	/* unit us */
+	/* FIXME: find a proper value */
+	wl->hw->channel_change_time = 10000;
+
+	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		IEEE80211_HW_NOISE_DBM;
+
+	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	wl->hw->wiphy->max_scan_ssids = 1;
+	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl12xx_band_2ghz;
+
+	SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
+
+	return 0;
+}
+
+#define WL12XX_DEFAULT_CHANNEL 1
+static int __devinit wl12xx_probe(struct spi_device *spi)
+{
+	struct wl12xx_platform_data *pdata;
+	struct ieee80211_hw *hw;
+	struct wl12xx *wl;
+	int ret, i;
+	static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		wl12xx_error("no platform data");
+		return -ENODEV;
+	}
+
+	hw = ieee80211_alloc_hw(sizeof(*wl), &wl12xx_ops);
+	if (!hw) {
+		wl12xx_error("could not alloc ieee80211_hw");
+		return -ENOMEM;
+	}
+
+	wl = hw->priv;
+	memset(wl, 0, sizeof(*wl));
+
+	wl->hw = hw;
+	dev_set_drvdata(&spi->dev, wl);
+	wl->spi = spi;
+
+	wl->data_in_count = 0;
+
+	skb_queue_head_init(&wl->tx_queue);
+
+	INIT_WORK(&wl->tx_work, wl12xx_tx_work);
+	INIT_WORK(&wl->filter_work, wl12xx_filter_work);
+	wl->channel = WL12XX_DEFAULT_CHANNEL;
+	wl->scanning = false;
+	wl->default_key = 0;
+	wl->listen_int = 1;
+	wl->rx_counter = 0;
+	wl->rx_handled = 0;
+	wl->rx_current_buffer = 0;
+	wl->rx_last_id = 0;
+	wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
+	wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
+	wl->elp = false;
+	wl->psm = 0;
+	wl->psm_requested = false;
+	wl->tx_queue_stopped = false;
+	wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
+
+	/* We use the default power on sleep time until we know which chip
+	 * we're using */
+	wl->chip.power_on_sleep = WL12XX_DEFAULT_POWER_ON_SLEEP;
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		wl->tx_frames[i] = NULL;
+
+	wl->next_tx_complete = 0;
+
+	/*
+	 * In case our MAC address is not correctly set,
+	 * we use a random but Nokia MAC.
+	 */
+	memcpy(wl->mac_addr, nokia_oui, 3);
+	get_random_bytes(wl->mac_addr + 3, 3);
+
+	wl->state = WL12XX_STATE_OFF;
+	mutex_init(&wl->mutex);
+
+	wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
+	wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
+
+	/* This is the only SPI value that we need to set here, the rest
+	 * comes from the board-peripherals file */
+	spi->bits_per_word = 32;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		wl12xx_error("spi_setup failed");
+		goto out_free;
+	}
+
+	wl->set_power = pdata->set_power;
+	if (!wl->set_power) {
+		wl12xx_error("set power function missing in platform data");
+		return -ENODEV;
+	}
+
+	wl->irq = spi->irq;
+	if (wl->irq < 0) {
+		wl12xx_error("irq missing in platform data");
+		return -ENODEV;
+	}
+
+	ret = request_irq(wl->irq, wl12xx_irq, 0, DRIVER_NAME, wl);
+	if (ret < 0) {
+		wl12xx_error("request_irq() failed: %d", ret);
+		goto out_free;
+	}
+
+	set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+	disable_irq(wl->irq);
+
+	ret = wl12xx_init_ieee80211(wl);
+	if (ret)
+		goto out_irq;
+
+	ret = wl12xx_register_hw(wl);
+	if (ret)
+		goto out_irq;
+
+	wl12xx_debugfs_init(wl);
+
+	wl12xx_notice("initialized");
+
+	return 0;
+
+ out_irq:
+	free_irq(wl->irq, wl);
+
+ out_free:
+	ieee80211_free_hw(hw);
+
+	return ret;
+}
+
+static int __devexit wl12xx_remove(struct spi_device *spi)
+{
+	struct wl12xx *wl = dev_get_drvdata(&spi->dev);
+
+	ieee80211_unregister_hw(wl->hw);
+
+	wl12xx_debugfs_exit(wl);
+
+	free_irq(wl->irq, wl);
+	kfree(wl->target_mem_map);
+	kfree(wl->data_path);
+	kfree(wl->fw);
+	wl->fw = NULL;
+	kfree(wl->nvs);
+	wl->nvs = NULL;
+	ieee80211_free_hw(wl->hw);
+
+	return 0;
+}
+
+
+static struct spi_driver wl12xx_spi_driver = {
+	.driver = {
+		.name		= "wl12xx",
+		.bus		= &spi_bus_type,
+		.owner		= THIS_MODULE,
+	},
+
+	.probe		= wl12xx_probe,
+	.remove		= __devexit_p(wl12xx_remove),
+};
+
+static int __init wl12xx_init(void)
+{
+	int ret;
+
+	ret = spi_register_driver(&wl12xx_spi_driver);
+	if (ret < 0) {
+		wl12xx_error("failed to register spi driver: %d", ret);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit wl12xx_exit(void)
+{
+	spi_unregister_driver(&wl12xx_spi_driver);
+
+	wl12xx_notice("unloaded");
+}
+
+module_init(wl12xx_init);
+module_exit(wl12xx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <Kalle.Valo@nokia.com>, "
+		"Luciano Coelho <luciano.coelho@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
new file mode 100644
index 00000000000..83a10117330
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -0,0 +1,151 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "reg.h"
+#include "ps.h"
+#include "spi.h"
+
+#define WL12XX_WAKEUP_TIMEOUT 2000
+
+/* Routines to toggle sleep mode while in ELP */
+void wl12xx_ps_elp_sleep(struct wl12xx *wl)
+{
+	if (wl->elp || !wl->psm)
+		return;
+
+	wl12xx_debug(DEBUG_PSM, "chip to elp");
+
+	wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+
+	wl->elp = true;
+}
+
+int wl12xx_ps_elp_wakeup(struct wl12xx *wl)
+{
+	unsigned long timeout;
+	u32 elp_reg;
+
+	if (!wl->elp)
+		return 0;
+
+	wl12xx_debug(DEBUG_PSM, "waking up chip from elp");
+
+	timeout = jiffies + msecs_to_jiffies(WL12XX_WAKEUP_TIMEOUT);
+
+	wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+
+	elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+	/*
+	 * FIXME: we should wait for irq from chip but, as a temporary
+	 * solution to simplify locking, let's poll instead
+	 */
+	while (!(elp_reg & ELPCTRL_WLAN_READY)) {
+		if (time_after(jiffies, timeout)) {
+			wl12xx_error("elp wakeup timeout");
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+		elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+	}
+
+	wl12xx_debug(DEBUG_PSM, "wakeup time: %u ms",
+		     jiffies_to_msecs(jiffies) -
+		     (jiffies_to_msecs(timeout) - WL12XX_WAKEUP_TIMEOUT));
+
+	wl->elp = false;
+
+	return 0;
+}
+
+static int wl12xx_ps_set_elp(struct wl12xx *wl, bool enable)
+{
+	int ret;
+
+	if (enable) {
+		wl12xx_debug(DEBUG_PSM, "sleep auth psm/elp");
+
+		/*
+		 * FIXME: we should PSM_ELP, but because of firmware wakeup
+		 * problems let's use only PSM_PS
+		 */
+		ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_PS);
+		if (ret < 0)
+			return ret;
+
+		wl12xx_ps_elp_sleep(wl);
+	} else {
+		wl12xx_debug(DEBUG_PSM, "sleep auth cam");
+
+		/*
+		 * When the target is in ELP, we can only
+		 * access the ELP control register. Thus,
+		 * we have to wake the target up before
+		 * changing the power authorization.
+		 */
+
+		wl12xx_ps_elp_wakeup(wl);
+
+		ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode)
+{
+	int ret;
+
+	switch (mode) {
+	case STATION_POWER_SAVE_MODE:
+		wl12xx_debug(DEBUG_PSM, "entering psm");
+		ret = wl12xx_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
+		if (ret < 0)
+			return ret;
+
+		ret = wl12xx_ps_set_elp(wl, true);
+		if (ret < 0)
+			return ret;
+
+		wl->psm = 1;
+		break;
+	case STATION_ACTIVE_MODE:
+	default:
+		wl12xx_debug(DEBUG_PSM, "leaving psm");
+		ret = wl12xx_ps_set_elp(wl, false);
+		if (ret < 0)
+			return ret;
+
+		ret = wl12xx_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+		if (ret < 0)
+			return ret;
+
+		wl->psm = 0;
+		break;
+	}
+
+	return ret;
+}
+
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h
new file mode 100644
index 00000000000..5d7c5255383
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/ps.h
@@ -0,0 +1,36 @@
+#ifndef __WL12XX_PS_H__
+#define __WL12XX_PS_H__
+
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "acx.h"
+
+int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode);
+void wl12xx_ps_elp_sleep(struct wl12xx *wl);
+int wl12xx_ps_elp_wakeup(struct wl12xx *wl);
+
+
+#endif /* __WL12XX_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h
new file mode 100644
index 00000000000..e421643215c
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/reg.h
@@ -0,0 +1,745 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#include <linux/bitops.h>
+#include "wl12xx.h"
+
+#define REGISTERS_BASE 0x00300000
+#define DRPW_BASE      0x00310000
+
+#define REGISTERS_DOWN_SIZE 0x00008800
+#define REGISTERS_WORK_SIZE 0x0000b000
+
+#define HW_ACCESS_ELP_CTRL_REG_ADDR         0x1FFFC
+
+/* ELP register commands */
+#define ELPCTRL_WAKE_UP             0x1
+#define ELPCTRL_WAKE_UP_WLAN_READY  0x5
+#define ELPCTRL_SLEEP               0x0
+/* ELP WLAN_READY bit */
+#define ELPCTRL_WLAN_READY          0x2
+
+/*
+ * Interrupt registers.
+ * 64 bit interrupt sources registers ws ced.
+ * sme interupts were removed and new ones were added.
+ * Order was changed.
+ */
+#define FIQ_MASK                       (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_L                     (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_H                     (REGISTERS_BASE + 0x0404)
+#define FIQ_MASK_SET                   (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_L                 (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_H                 (REGISTERS_BASE + 0x040C)
+#define FIQ_MASK_CLR                   (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_L                 (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_H                 (REGISTERS_BASE + 0x0414)
+#define IRQ_MASK                       (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_L                     (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_H                     (REGISTERS_BASE + 0x041C)
+#define IRQ_MASK_SET                   (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_L                 (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_H                 (REGISTERS_BASE + 0x0424)
+#define IRQ_MASK_CLR                   (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_L                 (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_H                 (REGISTERS_BASE + 0x042C)
+#define ECPU_MASK                      (REGISTERS_BASE + 0x0448)
+#define FIQ_STS_L                      (REGISTERS_BASE + 0x044C)
+#define FIQ_STS_H                      (REGISTERS_BASE + 0x0450)
+#define IRQ_STS_L                      (REGISTERS_BASE + 0x0454)
+#define IRQ_STS_H                      (REGISTERS_BASE + 0x0458)
+#define INT_STS_ND                     (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_L                  (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_H                  (REGISTERS_BASE + 0x0468)
+#define INT_STS_CLR                    (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_L                  (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_H                  (REGISTERS_BASE + 0x04B8)
+#define INT_ACK                        (REGISTERS_BASE + 0x046C)
+#define INT_ACK_L                      (REGISTERS_BASE + 0x046C)
+#define INT_ACK_H                      (REGISTERS_BASE + 0x0470)
+#define INT_TRIG                       (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_L                     (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_H                     (REGISTERS_BASE + 0x0478)
+#define HOST_STS_L                     (REGISTERS_BASE + 0x045C)
+#define HOST_STS_H                     (REGISTERS_BASE + 0x0460)
+#define HOST_MASK                      (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_L                    (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_H                    (REGISTERS_BASE + 0x0434)
+#define HOST_MASK_SET                  (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_L                (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_H                (REGISTERS_BASE + 0x043C)
+#define HOST_MASK_CLR                  (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_L                (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_H                (REGISTERS_BASE + 0x0444)
+
+/* Host Interrupts*/
+#define HINT_MASK                      (REGISTERS_BASE + 0x0494)
+#define HINT_MASK_SET                  (REGISTERS_BASE + 0x0498)
+#define HINT_MASK_CLR                  (REGISTERS_BASE + 0x049C)
+#define HINT_STS_ND_MASKED             (REGISTERS_BASE + 0x04A0)
+/*1150 spec calls this HINT_STS_RAW*/
+#define HINT_STS_ND		       (REGISTERS_BASE + 0x04B0)
+#define HINT_STS_CLR                   (REGISTERS_BASE + 0x04A4)
+#define HINT_ACK                       (REGISTERS_BASE + 0x04A8)
+#define HINT_TRIG                      (REGISTERS_BASE + 0x04AC)
+
+/* Device Configuration registers*/
+#define SOR_CFG                        (REGISTERS_BASE + 0x0800)
+#define ECPU_CTRL                      (REGISTERS_BASE + 0x0804)
+#define HI_CFG                         (REGISTERS_BASE + 0x0808)
+#define EE_START                       (REGISTERS_BASE + 0x080C)
+
+#define CHIP_ID_B                      (REGISTERS_BASE + 0x5674)
+
+#define CHIP_ID_1251_PG10	           (0x7010101)
+#define CHIP_ID_1251_PG11	           (0x7020101)
+#define CHIP_ID_1251_PG12	           (0x7030101)
+
+#define ENABLE                         (REGISTERS_BASE + 0x5450)
+
+/* Power Management registers */
+#define ELP_CFG_MODE                   (REGISTERS_BASE + 0x5804)
+#define ELP_CMD                        (REGISTERS_BASE + 0x5808)
+#define PLL_CAL_TIME                   (REGISTERS_BASE + 0x5810)
+#define CLK_REQ_TIME                   (REGISTERS_BASE + 0x5814)
+#define CLK_BUF_TIME                   (REGISTERS_BASE + 0x5818)
+
+#define CFG_PLL_SYNC_CNT               (REGISTERS_BASE + 0x5820)
+
+/* Scratch Pad registers*/
+#define SCR_PAD0                       (REGISTERS_BASE + 0x5608)
+#define SCR_PAD1                       (REGISTERS_BASE + 0x560C)
+#define SCR_PAD2                       (REGISTERS_BASE + 0x5610)
+#define SCR_PAD3                       (REGISTERS_BASE + 0x5614)
+#define SCR_PAD4                       (REGISTERS_BASE + 0x5618)
+#define SCR_PAD4_SET                   (REGISTERS_BASE + 0x561C)
+#define SCR_PAD4_CLR                   (REGISTERS_BASE + 0x5620)
+#define SCR_PAD5                       (REGISTERS_BASE + 0x5624)
+#define SCR_PAD5_SET                   (REGISTERS_BASE + 0x5628)
+#define SCR_PAD5_CLR                   (REGISTERS_BASE + 0x562C)
+#define SCR_PAD6                       (REGISTERS_BASE + 0x5630)
+#define SCR_PAD7                       (REGISTERS_BASE + 0x5634)
+#define SCR_PAD8                       (REGISTERS_BASE + 0x5638)
+#define SCR_PAD9                       (REGISTERS_BASE + 0x563C)
+
+/* Spare registers*/
+#define SPARE_A1                       (REGISTERS_BASE + 0x0994)
+#define SPARE_A2                       (REGISTERS_BASE + 0x0998)
+#define SPARE_A3                       (REGISTERS_BASE + 0x099C)
+#define SPARE_A4                       (REGISTERS_BASE + 0x09A0)
+#define SPARE_A5                       (REGISTERS_BASE + 0x09A4)
+#define SPARE_A6                       (REGISTERS_BASE + 0x09A8)
+#define SPARE_A7                       (REGISTERS_BASE + 0x09AC)
+#define SPARE_A8                       (REGISTERS_BASE + 0x09B0)
+#define SPARE_B1                       (REGISTERS_BASE + 0x5420)
+#define SPARE_B2                       (REGISTERS_BASE + 0x5424)
+#define SPARE_B3                       (REGISTERS_BASE + 0x5428)
+#define SPARE_B4                       (REGISTERS_BASE + 0x542C)
+#define SPARE_B5                       (REGISTERS_BASE + 0x5430)
+#define SPARE_B6                       (REGISTERS_BASE + 0x5434)
+#define SPARE_B7                       (REGISTERS_BASE + 0x5438)
+#define SPARE_B8                       (REGISTERS_BASE + 0x543C)
+
+enum wl12xx_acx_int_reg {
+	ACX_REG_INTERRUPT_TRIG,
+	ACX_REG_INTERRUPT_TRIG_H,
+
+/*=============================================
+  Host Interrupt Mask Register - 32bit (RW)
+  ------------------------------------------
+  Setting a bit in this register masks the
+  corresponding interrupt to the host.
+  0 - RX0		- Rx first dubble buffer Data Interrupt
+  1 - TXD		- Tx Data Interrupt
+  2 - TXXFR		- Tx Transfer Interrupt
+  3 - RX1		- Rx second dubble buffer Data Interrupt
+  4 - RXXFR		- Rx Transfer Interrupt
+  5 - EVENT_A	- Event Mailbox interrupt
+  6 - EVENT_B	- Event Mailbox interrupt
+  7 - WNONHST	- Wake On Host Interrupt
+  8 - TRACE_A	- Debug Trace interrupt
+  9 - TRACE_B	- Debug Trace interrupt
+ 10 - CDCMP		- Command Complete Interrupt
+ 11 -
+ 12 -
+ 13 -
+ 14 - ICOMP		- Initialization Complete Interrupt
+ 16 - SG SE		- Soft Gemini - Sense enable interrupt
+ 17 - SG SD		- Soft Gemini - Sense disable interrupt
+ 18 -			-
+ 19 -			-
+ 20 -			-
+ 21-			-
+ Default: 0x0001
+*==============================================*/
+	ACX_REG_INTERRUPT_MASK,
+
+/*=============================================
+  Host Interrupt Mask Set 16bit, (Write only)
+  ------------------------------------------
+ Setting a bit in this register sets
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+==============================================*/
+	ACX_REG_HINT_MASK_SET,
+
+/*=============================================
+  Host Interrupt Mask Clear 16bit,(Write only)
+  ------------------------------------------
+ Setting a bit in this register clears
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+=============================================*/
+	ACX_REG_HINT_MASK_CLR,
+
+/*=============================================
+  Host Interrupt Status Nondestructive Read
+  16bit,(Read only)
+  ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register doesn't
+ effect its content.
+=============================================*/
+	ACX_REG_INTERRUPT_NO_CLEAR,
+
+/*=============================================
+  Host Interrupt Status Clear on Read  Register
+  16bit,(Read only)
+  ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register clears it,
+ thus making all interrupts inactive.
+==============================================*/
+	ACX_REG_INTERRUPT_CLEAR,
+
+/*=============================================
+  Host Interrupt Acknowledge Register
+  16bit,(Write only)
+  ------------------------------------------
+ The host can set individual bits in this
+ register to clear (acknowledge) the corresp.
+ interrupt status bits in the HINT_STS_CLR and
+ HINT_STS_ND registers, thus making the
+ assotiated interrupt inactive. (0-no effect)
+==============================================*/
+	ACX_REG_INTERRUPT_ACK,
+
+/*===============================================
+   Host Software Reset - 32bit RW
+ ------------------------------------------
+    [31:1] Reserved
+    0  SOFT_RESET Soft Reset  - When this bit is set,
+    it holds the Wlan hardware in a soft reset state.
+    This reset disables all MAC and baseband processor
+    clocks except the CardBus/PCI interface clock.
+    It also initializes all MAC state machines except
+    the host interface. It does not reload the
+    contents of the EEPROM. When this bit is cleared
+    (not self-clearing), the Wlan hardware
+    exits the software reset state.
+===============================================*/
+	ACX_REG_SLV_SOFT_RESET,
+
+/*===============================================
+ EEPROM Burst Read Start  - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0  ACX_EE_START -  EEPROM Burst Read Start 0
+ Setting this bit starts a burst read from
+ the external EEPROM.
+ If this bit is set (after reset) before an EEPROM read/write,
+ the burst read starts at EEPROM address 0.
+ Otherwise, it starts at the address
+ following the address of the previous access.
+ TheWlan hardware hardware clears this bit automatically.
+
+ Default: 0x00000000
+*================================================*/
+	ACX_REG_EE_START,
+
+/* Embedded ARM CPU Control */
+
+/*===============================================
+ Halt eCPU   - 32bit RW
+ ------------------------------------------
+ 0 HALT_ECPU Halt Embedded CPU - This bit is the
+ compliment of bit 1 (MDATA2) in the SOR_CFG register.
+ During a hardware reset, this bit holds
+ the inverse of MDATA2.
+ When downloading firmware from the host,
+ set this bit (pull down MDATA2).
+ The host clears this bit after downloading the firmware into
+ zero-wait-state SSRAM.
+ When loading firmware from Flash, clear this bit (pull up MDATA2)
+ so that the eCPU can run the bootloader code in Flash
+ HALT_ECPU eCPU State
+ --------------------
+ 1 halt eCPU
+ 0 enable eCPU
+ ===============================================*/
+	ACX_REG_ECPU_CONTROL,
+
+	ACX_REG_TABLE_LEN
+};
+
+#define ACX_SLV_SOFT_RESET_BIT   BIT(1)
+#define ACX_REG_EEPROM_START_BIT BIT(1)
+
+/* Command/Information Mailbox Pointers */
+
+/*===============================================
+  Command Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the command mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to
+ find the location of the command mailbox.
+ The Wlan hardware initializes the command mailbox
+ pointer with the default address of the command mailbox.
+ The command mailbox pointer is not valid until after
+ the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_COMMAND_MAILBOX_PTR				(SCR_PAD0)
+
+/*===============================================
+  Information Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the information mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to find
+ the location of the information mailbox.
+ The Wlan hardware initializes the information mailbox pointer
+ with the default address of the information mailbox.
+ The information mailbox pointer is not valid
+ until after the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_EVENT_MAILBOX_PTR				(SCR_PAD1)
+
+
+/* Misc */
+
+#define REG_ENABLE_TX_RX				(ENABLE)
+/*
+ * Rx configuration (filter) information element
+ * ---------------------------------------------
+ */
+#define REG_RX_CONFIG				(RX_CFG)
+#define REG_RX_FILTER				(RX_FILTER_CFG)
+
+
+#define RX_CFG_ENABLE_PHY_HEADER_PLCP	 0x0002
+
+/* promiscuous - receives all valid frames */
+#define RX_CFG_PROMISCUOUS		 0x0008
+
+/* receives frames from any BSSID */
+#define RX_CFG_BSSID			 0x0020
+
+/* receives frames destined to any MAC address */
+#define RX_CFG_MAC			 0x0010
+
+#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC	 0x0010
+#define RX_CFG_ENABLE_ANY_DEST_MAC	 0x0000
+#define RX_CFG_ENABLE_ONLY_MY_BSSID	 0x0020
+#define RX_CFG_ENABLE_ANY_BSSID		 0x0000
+
+/* discards all broadcast frames */
+#define RX_CFG_DISABLE_BCAST		 0x0200
+
+#define RX_CFG_ENABLE_ONLY_MY_SSID	 0x0400
+#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800
+#define RX_CFG_COPY_RX_STATUS		 0x2000
+#define RX_CFG_TSF			 0x10000
+
+#define RX_CONFIG_OPTION_ANY_DST_MY_BSS	 (RX_CFG_ENABLE_ANY_DEST_MAC | \
+					  RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_ANY_BSS	 (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+					  | RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+					  RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_MY_BSS	 (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+					  | RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_FOR_SCAN  (RX_CFG_ENABLE_PHY_HEADER_PLCP \
+				    | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \
+				    | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF)
+
+#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_JOIN	 (RX_CFG_ENABLE_ONLY_MY_BSSID | \
+					  RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_IBSS_JOIN   (RX_CFG_ENABLE_ONLY_MY_SSID | \
+					  RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_FILTER_OPTION_DEF	      (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+				       | CFG_RX_CTL_EN | CFG_RX_BCN_EN\
+				       | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
+
+#define RX_FILTER_OPTION_FILTER_ALL	 0
+
+#define RX_FILTER_OPTION_DEF_PRSP_BCN  (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\
+					| CFG_RX_RCTS_ACK | CFG_RX_BCN_EN)
+
+#define RX_FILTER_OPTION_JOIN	     (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+				      | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\
+				      | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\
+				      | CFG_RX_PRSP_EN)
+
+
+/*===============================================
+  Phy regs
+ ===============================================*/
+#define ACX_PHY_ADDR_REG                SBB_ADDR
+#define ACX_PHY_DATA_REG                SBB_DATA
+#define ACX_PHY_CTRL_REG                SBB_CTL
+#define ACX_PHY_REG_WR_MASK             0x00000001ul
+#define ACX_PHY_REG_RD_MASK             0x00000002ul
+
+
+/*===============================================
+ EEPROM Read/Write Request 32bit RW
+ ------------------------------------------
+ 1 EE_READ - EEPROM Read Request 1 - Setting this bit
+ loads a single byte of data into the EE_DATA
+ register from the EEPROM location specified in
+ the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+ EE_DATA is valid when this bit is cleared.
+
+ 0 EE_WRITE  - EEPROM Write Request  - Setting this bit
+ writes a single byte of data from the EE_DATA register into the
+ EEPROM location specified in the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+*===============================================*/
+#define ACX_EE_CTL_REG                      EE_CTL
+#define EE_WRITE                            0x00000001ul
+#define EE_READ                             0x00000002ul
+
+/*===============================================
+  EEPROM Address  - 32bit RW
+  ------------------------------------------
+  This register specifies the address
+  within the EEPROM from/to which to read/write data.
+  ===============================================*/
+#define ACX_EE_ADDR_REG                     EE_ADDR
+
+/*===============================================
+  EEPROM Data  - 32bit RW
+  ------------------------------------------
+  This register either holds the read 8 bits of
+  data from the EEPROM or the write data
+  to be written to the EEPROM.
+  ===============================================*/
+#define ACX_EE_DATA_REG                     EE_DATA
+
+/*===============================================
+  EEPROM Base Address  - 32bit RW
+  ------------------------------------------
+  This register holds the upper nine bits
+  [23:15] of the 24-bit Wlan hardware memory
+  address for burst reads from EEPROM accesses.
+  The EEPROM provides the lower 15 bits of this address.
+  The MSB of the address from the EEPROM is ignored.
+  ===============================================*/
+#define ACX_EE_CFG                          EE_CFG
+
+/*===============================================
+  GPIO Output Values  -32bit, RW
+  ------------------------------------------
+  [31:16]  Reserved
+  [15: 0]  Specify the output values (at the output driver inputs) for
+  GPIO[15:0], respectively.
+  ===============================================*/
+#define ACX_GPIO_OUT_REG            GPIO_OUT
+#define ACX_MAX_GPIO_LINES          15
+
+/*===============================================
+  Contention window  -32bit, RW
+  ------------------------------------------
+  [31:26]  Reserved
+  [25:16]  Max (0x3ff)
+  [15:07]  Reserved
+  [06:00]  Current contention window value - default is 0x1F
+  ===============================================*/
+#define ACX_CONT_WIND_CFG_REG    CONT_WIND_CFG
+#define ACX_CONT_WIND_MIN_MASK   0x0000007f
+#define ACX_CONT_WIND_MAX        0x03ff0000
+
+/*
+ * Indirect slave register/memory registers
+ * ----------------------------------------
+ */
+#define HW_SLAVE_REG_ADDR_REG		0x00000004
+#define HW_SLAVE_REG_DATA_REG		0x00000008
+#define HW_SLAVE_REG_CTRL_REG		0x0000000c
+
+#define SLAVE_AUTO_INC				0x00010000
+#define SLAVE_NO_AUTO_INC			0x00000000
+#define SLAVE_HOST_LITTLE_ENDIAN	0x00000000
+
+#define HW_SLAVE_MEM_ADDR_REG		SLV_MEM_ADDR
+#define HW_SLAVE_MEM_DATA_REG		SLV_MEM_DATA
+#define HW_SLAVE_MEM_CTRL_REG		SLV_MEM_CTL
+#define HW_SLAVE_MEM_ENDIAN_REG		SLV_END_CTL
+
+#define HW_FUNC_EVENT_INT_EN		0x8000
+#define HW_FUNC_EVENT_MASK_REG		0x00000034
+
+#define ACX_MAC_TIMESTAMP_REG	(MAC_TIMESTAMP)
+
+/*===============================================
+  HI_CFG Interface Configuration Register Values
+  ------------------------------------------
+  ===============================================*/
+#define HI_CFG_UART_ENABLE          0x00000004
+#define HI_CFG_RST232_ENABLE        0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT     0x00000010
+#define HI_CFG_HOST_INT_ENABLE      0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE  0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW  0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15  0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14  0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7   0x00000400
+
+/*
+ * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
+ *       for platforms using active high interrupt level
+ */
+#ifdef USE_ACTIVE_HIGH
+#define HI_CFG_DEF_VAL              \
+	(HI_CFG_UART_ENABLE |        \
+	HI_CFG_RST232_ENABLE |      \
+	HI_CFG_CLOCK_REQ_SELECT |   \
+	HI_CFG_HOST_INT_ENABLE)
+#else
+#define HI_CFG_DEF_VAL              \
+	(HI_CFG_UART_ENABLE |        \
+	HI_CFG_RST232_ENABLE |      \
+	HI_CFG_CLOCK_REQ_SELECT |   \
+	HI_CFG_HOST_INT_ENABLE)
+
+#endif
+
+#define REF_FREQ_19_2                       0
+#define REF_FREQ_26_0                       1
+#define REF_FREQ_38_4                       2
+#define REF_FREQ_40_0                       3
+#define REF_FREQ_33_6                       4
+#define REF_FREQ_NUM                        5
+
+#define LUT_PARAM_INTEGER_DIVIDER           0
+#define LUT_PARAM_FRACTIONAL_DIVIDER        1
+#define LUT_PARAM_ATTN_BB                   2
+#define LUT_PARAM_ALPHA_BB                  3
+#define LUT_PARAM_STOP_TIME_BB              4
+#define LUT_PARAM_BB_PLL_LOOP_FILTER        5
+#define LUT_PARAM_NUM                       6
+
+#define ACX_EEPROMLESS_IND_REG              (SCR_PAD4)
+#define USE_EEPROM                          0
+#define SOFT_RESET_MAX_TIME                 1000000
+#define SOFT_RESET_STALL_TIME               1000
+#define NVS_DATA_BUNDARY_ALIGNMENT          4
+
+
+/* Firmware image load chunk size */
+#define CHUNK_SIZE          512
+
+/* Firmware image header size */
+#define FW_HDR_SIZE 8
+
+#define ECPU_CONTROL_HALT					0x00000101
+
+
+/******************************************************************************
+
+    CHANNELS, BAND & REG DOMAINS definitions
+
+******************************************************************************/
+
+
+enum {
+	RADIO_BAND_2_4GHZ = 0,  /* 2.4 Ghz band */
+	RADIO_BAND_5GHZ = 1,    /* 5 Ghz band */
+	RADIO_BAND_JAPAN_4_9_GHZ = 2,
+	DEFAULT_BAND = RADIO_BAND_2_4GHZ,
+	INVALID_BAND = 0xFE,
+	MAX_RADIO_BANDS = 0xFF
+};
+
+enum {
+	NO_RATE      = 0,
+	RATE_1MBPS   = 0x0A,
+	RATE_2MBPS   = 0x14,
+	RATE_5_5MBPS = 0x37,
+	RATE_6MBPS   = 0x0B,
+	RATE_9MBPS   = 0x0F,
+	RATE_11MBPS  = 0x6E,
+	RATE_12MBPS  = 0x0A,
+	RATE_18MBPS  = 0x0E,
+	RATE_22MBPS  = 0xDC,
+	RATE_24MBPS  = 0x09,
+	RATE_36MBPS  = 0x0D,
+	RATE_48MBPS  = 0x08,
+	RATE_54MBPS  = 0x0C
+};
+
+enum {
+	RATE_INDEX_1MBPS   =  0,
+	RATE_INDEX_2MBPS   =  1,
+	RATE_INDEX_5_5MBPS =  2,
+	RATE_INDEX_6MBPS   =  3,
+	RATE_INDEX_9MBPS   =  4,
+	RATE_INDEX_11MBPS  =  5,
+	RATE_INDEX_12MBPS  =  6,
+	RATE_INDEX_18MBPS  =  7,
+	RATE_INDEX_22MBPS  =  8,
+	RATE_INDEX_24MBPS  =  9,
+	RATE_INDEX_36MBPS  =  10,
+	RATE_INDEX_48MBPS  =  11,
+	RATE_INDEX_54MBPS  =  12,
+	RATE_INDEX_MAX     =  RATE_INDEX_54MBPS,
+	MAX_RATE_INDEX,
+	INVALID_RATE_INDEX = MAX_RATE_INDEX,
+	RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
+};
+
+enum {
+	RATE_MASK_1MBPS = 0x1,
+	RATE_MASK_2MBPS = 0x2,
+	RATE_MASK_5_5MBPS = 0x4,
+	RATE_MASK_11MBPS = 0x20,
+};
+
+#define SHORT_PREAMBLE_BIT   BIT(0) /* CCK or Barker depending on the rate */
+#define OFDM_RATE_BIT        BIT(6)
+#define PBCC_RATE_BIT        BIT(7)
+
+enum {
+	CCK_LONG = 0,
+	CCK_SHORT = SHORT_PREAMBLE_BIT,
+	PBCC_LONG = PBCC_RATE_BIT,
+	PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT,
+	OFDM = OFDM_RATE_BIT
+};
+
+/******************************************************************************
+
+Transmit-Descriptor RATE-SET field definitions...
+
+Define a new "Rate-Set" for TX path that incorporates the
+Rate & Modulation info into a single 16-bit field.
+
+TxdRateSet_t:
+b15   - Indicates Preamble type (1=SHORT, 0=LONG).
+	Notes:
+	Must be LONG (0) for 1Mbps rate.
+	Does not apply (set to 0) for RevG-OFDM rates.
+b14   - Indicates PBCC encoding (1=PBCC, 0=not).
+	Notes:
+	Does not apply (set to 0) for rates 1 and 2 Mbps.
+	Does not apply (set to 0) for RevG-OFDM rates.
+b13    - Unused (set to 0).
+b12-b0 - Supported Rate indicator bits as defined below.
+
+******************************************************************************/
+
+
+#define TNETW1251_CHIP_ID_PG1_0         0x07010101
+#define TNETW1251_CHIP_ID_PG1_1         0x07020101
+#define TNETW1251_CHIP_ID_PG1_2	        0x07030101
+
+/*************************************************************************
+
+    Interrupt Trigger Register (Host -> WiLink)
+
+**************************************************************************/
+
+/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+
+/*
+ * Host Command Interrupt. Setting this bit masks
+ * the interrupt that the host issues to inform
+ * the FW that it has sent a command
+ * to the Wlan hardware Command Mailbox.
+ */
+#define INTR_TRIG_CMD       BIT(0)
+
+/*
+ * Host Event Acknowlegde Interrupt. The host
+ * sets this bit to acknowledge that it received
+ * the unsolicited information from the event
+ * mailbox.
+ */
+#define INTR_TRIG_EVENT_ACK BIT(1)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * FW that a TX packet is in the XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_TX_PROC0 BIT(2)
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_RX_PROC0 BIT(3)
+
+#define INTR_TRIG_DEBUG_ACK BIT(4)
+
+#define INTR_TRIG_STATE_CHANGED BIT(5)
+
+
+/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_RX_PROC1 BIT(17)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * hardware that a TX packet is in the XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_TX_PROC1 BIT(18)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
new file mode 100644
index 00000000000..981ea259eb8
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -0,0 +1,208 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/skbuff.h>
+#include <net/mac80211.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "rx.h"
+
+static void wl12xx_rx_header(struct wl12xx *wl,
+			     struct wl12xx_rx_descriptor *desc)
+{
+	u32 rx_packet_ring_addr;
+
+	rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr;
+	if (wl->rx_current_buffer)
+		rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+	wl12xx_spi_mem_read(wl, rx_packet_ring_addr, desc,
+			    sizeof(struct wl12xx_rx_descriptor));
+}
+
+static void wl12xx_rx_status(struct wl12xx *wl,
+			     struct wl12xx_rx_descriptor *desc,
+			     struct ieee80211_rx_status *status,
+			     u8 beacon)
+{
+	memset(status, 0, sizeof(struct ieee80211_rx_status));
+
+	status->band = IEEE80211_BAND_2GHZ;
+	status->mactime = desc->timestamp;
+
+	/*
+	 * The rx status timestamp is a 32 bits value while the TSF is a
+	 * 64 bits one.
+	 * For IBSS merging, TSF is mandatory, so we have to get it
+	 * somehow, so we ask for ACX_TSF_INFO.
+	 * That could be moved to the get_tsf() hook, but unfortunately,
+	 * this one must be atomic, while our SPI routines can sleep.
+	 */
+	if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) {
+		u64 mactime;
+		int ret;
+		struct wl12xx_command cmd;
+		struct acx_tsf_info *tsf_info;
+
+		memset(&cmd, 0, sizeof(cmd));
+
+		ret = wl12xx_cmd_interrogate(wl, ACX_TSF_INFO,
+					     sizeof(struct acx_tsf_info),
+					     &cmd);
+		if (ret < 0) {
+			wl12xx_warning("ACX_FW_REV interrogate failed");
+			return;
+		}
+
+		tsf_info = (struct acx_tsf_info *)&(cmd.parameters);
+
+		mactime = tsf_info->current_tsf_lsb |
+			(tsf_info->current_tsf_msb << 31);
+
+		status->mactime = mactime;
+	}
+
+	status->signal = desc->rssi;
+	status->qual = (desc->rssi - WL12XX_RX_MIN_RSSI) * 100 /
+		(WL12XX_RX_MAX_RSSI - WL12XX_RX_MIN_RSSI);
+	status->qual = min(status->qual, 100);
+	status->qual = max(status->qual, 0);
+
+	/*
+	 * FIXME: guessing that snr needs to be divided by two, otherwise
+	 * the values don't make any sense
+	 */
+	status->noise = desc->rssi - desc->snr / 2;
+
+	status->freq = ieee80211_channel_to_frequency(desc->channel);
+
+	status->flag |= RX_FLAG_TSFT;
+
+	if (desc->flags & RX_DESC_ENCRYPTION_MASK) {
+		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+
+		if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL)))
+			status->flag |= RX_FLAG_DECRYPTED;
+
+		if (unlikely(desc->flags & RX_DESC_MIC_FAIL))
+			status->flag |= RX_FLAG_MMIC_ERROR;
+	}
+
+	if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
+		status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+
+	/* FIXME: set status->rate_idx */
+}
+
+static void wl12xx_rx_body(struct wl12xx *wl,
+			   struct wl12xx_rx_descriptor *desc)
+{
+	struct sk_buff *skb;
+	struct ieee80211_rx_status status;
+	u8 *rx_buffer, beacon = 0;
+	u16 length, *fc;
+	u32 curr_id, last_id_inc, rx_packet_ring_addr;
+
+	length = WL12XX_RX_ALIGN(desc->length  - PLCP_HEADER_LENGTH);
+	curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT;
+	last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1);
+
+	if (last_id_inc != curr_id) {
+		wl12xx_warning("curr ID:%d, last ID inc:%d",
+			       curr_id, last_id_inc);
+		wl->rx_last_id = curr_id;
+	} else {
+		wl->rx_last_id = last_id_inc;
+	}
+
+	rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr +
+		sizeof(struct wl12xx_rx_descriptor) + 20;
+	if (wl->rx_current_buffer)
+		rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+	skb = dev_alloc_skb(length);
+	if (!skb) {
+		wl12xx_error("Couldn't allocate RX frame");
+		return;
+	}
+
+	rx_buffer = skb_put(skb, length);
+	wl12xx_spi_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
+
+	/* The actual lenght doesn't include the target's alignment */
+	skb->len = desc->length  - PLCP_HEADER_LENGTH;
+
+	fc = (u16 *)skb->data;
+
+	if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
+		beacon = 1;
+
+	wl12xx_rx_status(wl, desc, &status, beacon);
+
+	wl12xx_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+		     beacon ? "beacon" : "");
+
+	ieee80211_rx(wl->hw, skb, &status);
+}
+
+static void wl12xx_rx_ack(struct wl12xx *wl)
+{
+	u32 data, addr;
+
+	if (wl->rx_current_buffer) {
+		addr = ACX_REG_INTERRUPT_TRIG_H;
+		data = INTR_TRIG_RX_PROC1;
+	} else {
+		addr = ACX_REG_INTERRUPT_TRIG;
+		data = INTR_TRIG_RX_PROC0;
+	}
+
+	wl12xx_reg_write32(wl, addr, data);
+
+	/* Toggle buffer ring */
+	wl->rx_current_buffer = !wl->rx_current_buffer;
+}
+
+
+void wl12xx_rx(struct wl12xx *wl)
+{
+	struct wl12xx_rx_descriptor rx_desc;
+
+	if (wl->state != WL12XX_STATE_ON)
+		return;
+
+	/* We first read the frame's header */
+	wl12xx_rx_header(wl, &rx_desc);
+
+	/* Now we can read the body */
+	wl12xx_rx_body(wl, &rx_desc);
+
+	/* Finally, we need to ACK the RX */
+	wl12xx_rx_ack(wl);
+
+	return;
+}
diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/wl12xx/rx.h
new file mode 100644
index 00000000000..8a23fdea501
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/rx.h
@@ -0,0 +1,122 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_RX_H__
+#define __WL12XX_RX_H__
+
+#include <linux/bitops.h>
+
+/*
+ * RX PATH
+ *
+ * The Rx path uses a double buffer and an rx_contro structure, each located
+ * at a fixed address in the device memory. The host keeps track of which
+ * buffer is available and alternates between them on a per packet basis.
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet.
+ * The RX path goes like that:
+ * 1) The target generates an interrupt each time a new packet is received.
+ *   There are 2 RX interrupts, one for each buffer.
+ * 2) The host reads the received packet from one of the double buffers.
+ * 3) The host triggers a target interrupt.
+ * 4) The target prepares the next RX packet.
+ */
+
+#define WL12XX_RX_MAX_RSSI -30
+#define WL12XX_RX_MIN_RSSI -95
+
+#define WL12XX_RX_ALIGN_TO 4
+#define WL12XX_RX_ALIGN(len) (((len) + WL12XX_RX_ALIGN_TO - 1) & \
+			     ~(WL12XX_RX_ALIGN_TO - 1))
+
+#define SHORT_PREAMBLE_BIT   BIT(0)
+#define OFDM_RATE_BIT        BIT(6)
+#define PBCC_RATE_BIT        BIT(7)
+
+#define PLCP_HEADER_LENGTH 8
+#define RX_DESC_PACKETID_SHIFT 11
+#define RX_MAX_PACKET_ID 3
+
+#define RX_DESC_VALID_FCS         0x0001
+#define RX_DESC_MATCH_RXADDR1     0x0002
+#define RX_DESC_MCAST             0x0004
+#define RX_DESC_STAINTIM          0x0008
+#define RX_DESC_VIRTUAL_BM        0x0010
+#define RX_DESC_BCAST             0x0020
+#define RX_DESC_MATCH_SSID        0x0040
+#define RX_DESC_MATCH_BSSID       0x0080
+#define RX_DESC_ENCRYPTION_MASK   0x0300
+#define RX_DESC_MEASURMENT        0x0400
+#define RX_DESC_SEQNUM_MASK       0x1800
+#define	RX_DESC_MIC_FAIL	  0x2000
+#define	RX_DESC_DECRYPT_FAIL	  0x4000
+
+struct wl12xx_rx_descriptor {
+	u32 timestamp; /* In microseconds */
+	u16 length; /* Paylod length, including headers */
+	u16 flags;
+
+	/*
+	 * 0 - 802.11
+	 * 1 - 802.3
+	 * 2 - IP
+	 * 3 - Raw Codec
+	 */
+	u8 type;
+
+	/*
+	 * Recevied Rate:
+	 * 0x0A - 1MBPS
+	 * 0x14 - 2MBPS
+	 * 0x37 - 5_5MBPS
+	 * 0x0B - 6MBPS
+	 * 0x0F - 9MBPS
+	 * 0x6E - 11MBPS
+	 * 0x0A - 12MBPS
+	 * 0x0E - 18MBPS
+	 * 0xDC - 22MBPS
+	 * 0x09 - 24MBPS
+	 * 0x0D - 36MBPS
+	 * 0x08 - 48MBPS
+	 * 0x0C - 54MBPS
+	 */
+	u8 rate;
+
+	u8 mod_pre; /* Modulation and preamble */
+	u8 channel;
+
+	/*
+	 * 0 - 2.4 Ghz
+	 * 1 - 5 Ghz
+	 */
+	u8 band;
+
+	s8 rssi; /* in dB */
+	u8 rcpi; /* in dB */
+	u8 snr; /* in dB */
+} __attribute__ ((packed));
+
+void wl12xx_rx(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
new file mode 100644
index 00000000000..abdf171a47e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -0,0 +1,358 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+static int wl12xx_translate_reg_addr(struct wl12xx *wl, int addr)
+{
+	/* If the address is lower than REGISTERS_BASE, it means that this is
+	 * a chip-specific register address, so look it up in the registers
+	 * table */
+	if (addr < REGISTERS_BASE) {
+		/* Make sure we don't go over the table */
+		if (addr >= ACX_REG_TABLE_LEN) {
+			wl12xx_error("address out of range (%d)", addr);
+			return -EINVAL;
+		}
+		addr = wl->chip.acx_reg_table[addr];
+	}
+
+	return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+}
+
+static int wl12xx_translate_mem_addr(struct wl12xx *wl, int addr)
+{
+	return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
+}
+
+
+void wl12xx_spi_reset(struct wl12xx *wl)
+{
+	u8 *cmd;
+	struct spi_transfer t;
+	struct spi_message m;
+
+	cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+	if (!cmd) {
+		wl12xx_error("could not allocate cmd for spi reset");
+		return;
+	}
+
+	memset(&t, 0, sizeof(t));
+	spi_message_init(&m);
+
+	memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
+
+	t.tx_buf = cmd;
+	t.len = WSPI_INIT_CMD_LEN;
+	spi_message_add_tail(&t, &m);
+
+	spi_sync(wl->spi, &m);
+
+	wl12xx_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+void wl12xx_spi_init(struct wl12xx *wl)
+{
+	u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
+	struct spi_transfer t;
+	struct spi_message m;
+
+	cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+	if (!cmd) {
+		wl12xx_error("could not allocate cmd for spi init");
+		return;
+	}
+
+	memset(crc, 0, sizeof(crc));
+	memset(&t, 0, sizeof(t));
+	spi_message_init(&m);
+
+	/*
+	 * Set WSPI_INIT_COMMAND
+	 * the data is being send from the MSB to LSB
+	 */
+	cmd[2] = 0xff;
+	cmd[3] = 0xff;
+	cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
+	cmd[0] = 0;
+	cmd[7] = 0;
+	cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
+	cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
+
+	if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
+		cmd[5] |=  WSPI_INIT_CMD_DIS_FIXEDBUSY;
+	else
+		cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
+
+	cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
+		| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
+
+	crc[0] = cmd[1];
+	crc[1] = cmd[0];
+	crc[2] = cmd[7];
+	crc[3] = cmd[6];
+	crc[4] = cmd[5];
+
+	cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
+	cmd[4] |= WSPI_INIT_CMD_END;
+
+	t.tx_buf = cmd;
+	t.len = WSPI_INIT_CMD_LEN;
+	spi_message_add_tail(&t, &m);
+
+	spi_sync(wl->spi, &m);
+
+	wl12xx_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+/* Set the SPI partitions to access the chip addresses
+ *
+ * There are two VIRTUAL (SPI) partitions (the memory partition and the
+ * registers partition), which are mapped to two different areas of the
+ * PHYSICAL (hardware) memory.  This function also makes other checks to
+ * ensure that the partitions are not overlapping.  In the diagram below, the
+ * memory partition comes before the register partition, but the opposite is
+ * also supported.
+ *
+ *                               PHYSICAL address
+ *                                     space
+ *
+ *                                    |    |
+ *                                 ...+----+--> mem_start
+ *          VIRTUAL address     ...   |    |
+ *               space       ...      |    | [PART_0]
+ *                        ...         |    |
+ * 0x00000000 <--+----+...         ...+----+--> mem_start + mem_size
+ *               |    |         ...   |    |
+ *               |MEM |      ...      |    |
+ *               |    |   ...         |    |
+ *  part_size <--+----+...            |    | {unused area)
+ *               |    |   ...         |    |
+ *               |REG |      ...      |    |
+ *  part_size    |    |         ...   |    |
+ *      +     <--+----+...         ...+----+--> reg_start
+ *  reg_size              ...         |    |
+ *                           ...      |    | [PART_1]
+ *                              ...   |    |
+ *                                 ...+----+--> reg_start + reg_size
+ *                                    |    |
+ *
+ */
+void wl12xx_set_partition(struct wl12xx *wl,
+			  u32 mem_start, u32 mem_size,
+			  u32 reg_start, u32 reg_size)
+{
+	u8 tx_buf[sizeof(u32) + 2 * sizeof(struct wl12xx_partition)];
+	struct wl12xx_partition *partition;
+	struct spi_transfer t;
+	struct spi_message m;
+	u32 *cmd;
+	size_t len;
+	int addr;
+
+	spi_message_init(&m);
+	memset(&t, 0, sizeof(t));
+	memset(tx_buf, 0, sizeof(tx_buf));
+
+	cmd = (u32 *) tx_buf;
+	partition = (struct wl12xx_partition *) (tx_buf + sizeof(u32));
+	addr = HW_ACCESS_PART0_SIZE_ADDR;
+	len = 2 * sizeof(struct wl12xx_partition);
+
+	*cmd |= WSPI_CMD_WRITE;
+	*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+	*cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+	wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+		     mem_start, mem_size);
+	wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+		     reg_start, reg_size);
+
+	/* Make sure that the two partitions together don't exceed the
+	 * address range */
+	if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
+		wl12xx_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
+			     " address range.  Truncating partition[0].");
+		mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
+		wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	}
+
+	if ((mem_start < reg_start) &&
+	    ((mem_start + mem_size) > reg_start)) {
+		/* Guarantee that the memory partition doesn't overlap the
+		 * registers partition */
+		wl12xx_debug(DEBUG_SPI, "End of partition[0] is "
+			     "overlapping partition[1].  Adjusted.");
+		mem_size = reg_start - mem_start;
+		wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	} else if ((reg_start < mem_start) &&
+		   ((reg_start + reg_size) > mem_start)) {
+		/* Guarantee that the register partition doesn't overlap the
+		 * memory partition */
+		wl12xx_debug(DEBUG_SPI, "End of partition[1] is"
+			     " overlapping partition[0].  Adjusted.");
+		reg_size = mem_start - reg_start;
+		wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	}
+
+	partition[0].start = mem_start;
+	partition[0].size  = mem_size;
+	partition[1].start = reg_start;
+	partition[1].size  = reg_size;
+
+	wl->physical_mem_addr = mem_start;
+	wl->physical_reg_addr = reg_start;
+
+	wl->virtual_mem_addr = 0;
+	wl->virtual_reg_addr = mem_size;
+
+	t.tx_buf = tx_buf;
+	t.len = sizeof(tx_buf);
+	spi_message_add_tail(&t, &m);
+
+	spi_sync(wl->spi, &m);
+}
+
+void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf,
+		     size_t len)
+{
+	struct spi_transfer t[3];
+	struct spi_message m;
+	char busy_buf[TNETWIF_READ_OFFSET_BYTES];
+	u32 cmd;
+
+	cmd = 0;
+	cmd |= WSPI_CMD_READ;
+	cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+	cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &cmd;
+	t[0].len = 4;
+	spi_message_add_tail(&t[0], &m);
+
+	/* Busy and non busy words read */
+	t[1].rx_buf = busy_buf;
+	t[1].len = TNETWIF_READ_OFFSET_BYTES;
+	spi_message_add_tail(&t[1], &m);
+
+	t[2].rx_buf = buf;
+	t[2].len = len;
+	spi_message_add_tail(&t[2], &m);
+
+	spi_sync(wl->spi, &m);
+
+	/* FIXME: check busy words */
+
+	wl12xx_dump(DEBUG_SPI, "spi_read cmd -> ", &cmd, sizeof(cmd));
+	wl12xx_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
+}
+
+void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf,
+		      size_t len)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	u32 cmd;
+
+	cmd = 0;
+	cmd |= WSPI_CMD_WRITE;
+	cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+	cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &cmd;
+	t[0].len = sizeof(cmd);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	spi_sync(wl->spi, &m);
+
+	wl12xx_dump(DEBUG_SPI, "spi_write cmd -> ", &cmd, sizeof(cmd));
+	wl12xx_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
+}
+
+void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf,
+			 size_t len)
+{
+	int physical;
+
+	physical = wl12xx_translate_mem_addr(wl, addr);
+
+	wl12xx_spi_read(wl, physical, buf, len);
+}
+
+void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf,
+			  size_t len)
+{
+	int physical;
+
+	physical = wl12xx_translate_mem_addr(wl, addr);
+
+	wl12xx_spi_write(wl, physical, buf, len);
+}
+
+u32 wl12xx_mem_read32(struct wl12xx *wl, int addr)
+{
+	return wl12xx_read32(wl, wl12xx_translate_mem_addr(wl, addr));
+}
+
+void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val)
+{
+	wl12xx_write32(wl, wl12xx_translate_mem_addr(wl, addr), val);
+}
+
+u32 wl12xx_reg_read32(struct wl12xx *wl, int addr)
+{
+	return wl12xx_read32(wl, wl12xx_translate_reg_addr(wl, addr));
+}
+
+void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val)
+{
+	wl12xx_write32(wl, wl12xx_translate_reg_addr(wl, addr), val);
+}
diff --git a/drivers/net/wireless/wl12xx/spi.h b/drivers/net/wireless/wl12xx/spi.h
new file mode 100644
index 00000000000..fd3227e904a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/spi.h
@@ -0,0 +1,109 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_SPI_H__
+#define __WL12XX_SPI_H__
+
+#include "cmd.h"
+#include "acx.h"
+#include "reg.h"
+
+#define HW_ACCESS_MEMORY_MAX_RANGE		0x1FFC0
+
+#define HW_ACCESS_PART0_SIZE_ADDR           0x1FFC0
+#define HW_ACCESS_PART0_START_ADDR          0x1FFC4
+#define HW_ACCESS_PART1_SIZE_ADDR           0x1FFC8
+#define HW_ACCESS_PART1_START_ADDR          0x1FFCC
+
+#define HW_ACCESS_REGISTER_SIZE             4
+
+#define HW_ACCESS_PRAM_MAX_RANGE		0x3c000
+
+#define WSPI_CMD_READ                 0x40000000
+#define WSPI_CMD_WRITE                0x00000000
+#define WSPI_CMD_FIXED                0x20000000
+#define WSPI_CMD_BYTE_LENGTH          0x1FFE0000
+#define WSPI_CMD_BYTE_LENGTH_OFFSET   17
+#define WSPI_CMD_BYTE_ADDR            0x0001FFFF
+
+#define WSPI_INIT_CMD_CRC_LEN       5
+
+#define WSPI_INIT_CMD_START         0x00
+#define WSPI_INIT_CMD_TX            0x40
+/* the extra bypass bit is sampled by the TNET as '1' */
+#define WSPI_INIT_CMD_BYPASS_BIT    0x80
+#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
+#define WSPI_INIT_CMD_EN_FIXEDBUSY  0x80
+#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
+#define WSPI_INIT_CMD_IOD           0x40
+#define WSPI_INIT_CMD_IP            0x20
+#define WSPI_INIT_CMD_CS            0x10
+#define WSPI_INIT_CMD_WS            0x08
+#define WSPI_INIT_CMD_WSPI          0x01
+#define WSPI_INIT_CMD_END           0x01
+
+#define WSPI_INIT_CMD_LEN           8
+
+#define TNETWIF_READ_OFFSET_BYTES  8
+#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
+		((TNETWIF_READ_OFFSET_BYTES - 4) / sizeof(u32))
+#define HW_ACCESS_WSPI_INIT_CMD_MASK  0
+
+
+/* Raw target IO, address is not translated */
+void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf, size_t len);
+void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf, size_t len);
+
+/* Memory target IO, address is tranlated to partition 0 */
+void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf, size_t len);
+void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf, size_t len);
+u32 wl12xx_mem_read32(struct wl12xx *wl, int addr);
+void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val);
+
+/* Registers IO */
+u32 wl12xx_reg_read32(struct wl12xx *wl, int addr);
+void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val);
+
+/* INIT and RESET words */
+void wl12xx_spi_reset(struct wl12xx *wl);
+void wl12xx_spi_init(struct wl12xx *wl);
+void wl12xx_set_partition(struct wl12xx *wl,
+			  u32 part_start, u32 part_size,
+			  u32 reg_start,  u32 reg_size);
+
+static inline u32 wl12xx_read32(struct wl12xx *wl, int addr)
+{
+	u32 response;
+
+	wl12xx_spi_read(wl, addr, &response, sizeof(u32));
+
+	return response;
+}
+
+static inline void wl12xx_write32(struct wl12xx *wl, int addr, u32 val)
+{
+	wl12xx_spi_write(wl, addr, &val, sizeof(u32));
+}
+
+#endif /* __WL12XX_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
new file mode 100644
index 00000000000..62145e205a8
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -0,0 +1,557 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "tx.h"
+#include "ps.h"
+
+static bool wl12xx_tx_double_buffer_busy(struct wl12xx *wl, u32 data_out_count)
+{
+	int used, data_in_count;
+
+	data_in_count = wl->data_in_count;
+
+	if (data_in_count < data_out_count)
+		/* data_in_count has wrapped */
+		data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
+
+	used = data_in_count - data_out_count;
+
+	WARN_ON(used < 0);
+	WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
+
+	if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
+		return true;
+	else
+		return false;
+}
+
+static int wl12xx_tx_path_status(struct wl12xx *wl)
+{
+	u32 status, addr, data_out_count;
+	bool busy;
+
+	addr = wl->data_path->tx_control_addr;
+	status = wl12xx_mem_read32(wl, addr);
+	data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
+	busy = wl12xx_tx_double_buffer_busy(wl, data_out_count);
+
+	if (busy)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int wl12xx_tx_id(struct wl12xx *wl, struct sk_buff *skb)
+{
+	int i;
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		if (wl->tx_frames[i] == NULL) {
+			wl->tx_frames[i] = skb;
+			return i;
+		}
+
+	return -EBUSY;
+}
+
+static void wl12xx_tx_control(struct tx_double_buffer_desc *tx_hdr,
+			      struct ieee80211_tx_info *control, u16 fc)
+{
+	*(u16 *)&tx_hdr->control = 0;
+
+	tx_hdr->control.rate_policy = 0;
+
+	/* 802.11 packets */
+	tx_hdr->control.packet_type = 0;
+
+	if (control->flags & IEEE80211_TX_CTL_NO_ACK)
+		tx_hdr->control.ack_policy = 1;
+
+	tx_hdr->control.tx_complete = 1;
+
+	if ((fc & IEEE80211_FTYPE_DATA) &&
+	    ((fc & IEEE80211_STYPE_QOS_DATA) ||
+	     (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
+		tx_hdr->control.qos = 1;
+}
+
+/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
+#define MAX_MSDU_SECURITY_LENGTH      16
+#define MAX_MPDU_SECURITY_LENGTH      16
+#define WLAN_QOS_HDR_LEN              26
+#define MAX_MPDU_HEADER_AND_SECURITY  (MAX_MPDU_SECURITY_LENGTH + \
+				       WLAN_QOS_HDR_LEN)
+#define HW_BLOCK_SIZE                 252
+static void wl12xx_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
+{
+	u16 payload_len, frag_threshold, mem_blocks;
+	u16 num_mpdus, mem_blocks_per_frag;
+
+	frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+	tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
+
+	payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
+
+	if (payload_len > frag_threshold) {
+		mem_blocks_per_frag =
+			((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
+			 HW_BLOCK_SIZE) + 1;
+		num_mpdus = payload_len / frag_threshold;
+		mem_blocks = num_mpdus * mem_blocks_per_frag;
+		payload_len -= num_mpdus * frag_threshold;
+		num_mpdus++;
+
+	} else {
+		mem_blocks_per_frag = 0;
+		mem_blocks = 0;
+		num_mpdus = 1;
+	}
+
+	mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
+
+	if (num_mpdus > 1)
+		mem_blocks += min(num_mpdus, mem_blocks_per_frag);
+
+	tx_hdr->num_mem_blocks = mem_blocks;
+}
+
+static int wl12xx_tx_fill_hdr(struct wl12xx *wl, struct sk_buff *skb,
+			      struct ieee80211_tx_info *control)
+{
+	struct tx_double_buffer_desc *tx_hdr;
+	struct ieee80211_rate *rate;
+	int id;
+	u16 fc;
+
+	if (!skb)
+		return -EINVAL;
+
+	id = wl12xx_tx_id(wl, skb);
+	if (id < 0)
+		return id;
+
+	fc = *(u16 *)skb->data;
+	tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
+							   sizeof(*tx_hdr));
+
+	tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
+	rate = ieee80211_get_tx_rate(wl->hw, control);
+	tx_hdr->rate = cpu_to_le16(rate->hw_value);
+	tx_hdr->expiry_time = cpu_to_le32(1 << 16);
+	tx_hdr->id = id;
+
+	/* FIXME: how to get the correct queue id? */
+	tx_hdr->xmit_queue = 0;
+
+	wl12xx_tx_control(tx_hdr, control, fc);
+	wl12xx_tx_frag_block_num(tx_hdr);
+
+	return 0;
+}
+
+/* We copy the packet to the target */
+static int wl12xx_tx_send_packet(struct wl12xx *wl, struct sk_buff *skb,
+				 struct ieee80211_tx_info *control)
+{
+	struct tx_double_buffer_desc *tx_hdr;
+	int len;
+	u32 addr;
+
+	if (!skb)
+		return -EINVAL;
+
+	tx_hdr = (struct tx_double_buffer_desc *) skb->data;
+
+	if (control->control.hw_key &&
+	    control->control.hw_key->alg == ALG_TKIP) {
+		int hdrlen;
+		u16 fc;
+		u8 *pos;
+
+		fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
+		tx_hdr->length += WL12XX_TKIP_IV_SPACE;
+
+		hdrlen = ieee80211_hdrlen(fc);
+
+		pos = skb_push(skb, WL12XX_TKIP_IV_SPACE);
+		memmove(pos, pos + WL12XX_TKIP_IV_SPACE,
+			sizeof(*tx_hdr) + hdrlen);
+	}
+
+	/* Revisit. This is a workaround for getting non-aligned packets.
+	   This happens at least with EAPOL packets from the user space.
+	   Our DMA requires packets to be aligned on a 4-byte boundary.
+	*/
+	if (unlikely((long)skb->data & 0x03)) {
+		int offset = (4 - (long)skb->data) & 0x03;
+		wl12xx_debug(DEBUG_TX, "skb offset %d", offset);
+
+		/* check whether the current skb can be used */
+		if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
+			unsigned char *src = skb->data;
+
+			/* align the buffer on a 4-byte boundary */
+			skb_reserve(skb, offset);
+			memmove(skb->data, src, skb->len);
+		} else {
+			wl12xx_info("No handler, fixme!");
+			return -EINVAL;
+		}
+	}
+
+	/* Our skb->data at this point includes the HW header */
+	len = WL12XX_TX_ALIGN(skb->len);
+
+	if (wl->data_in_count & 0x1)
+		addr = wl->data_path->tx_packet_ring_addr +
+			wl->data_path->tx_packet_ring_chunk_size;
+	else
+		addr = wl->data_path->tx_packet_ring_addr;
+
+	wl12xx_spi_mem_write(wl, addr, skb->data, len);
+
+	wl12xx_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
+		     tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
+
+	return 0;
+}
+
+static void wl12xx_tx_trigger(struct wl12xx *wl)
+{
+	u32 data, addr;
+
+	if (wl->data_in_count & 0x1) {
+		addr = ACX_REG_INTERRUPT_TRIG_H;
+		data = INTR_TRIG_TX_PROC1;
+	} else {
+		addr = ACX_REG_INTERRUPT_TRIG;
+		data = INTR_TRIG_TX_PROC0;
+	}
+
+	wl12xx_reg_write32(wl, addr, data);
+
+	/* Bumping data in */
+	wl->data_in_count = (wl->data_in_count + 1) &
+		TX_STATUS_DATA_OUT_COUNT_MASK;
+}
+
+/* caller must hold wl->mutex */
+static int wl12xx_tx_frame(struct wl12xx *wl, struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info;
+	int ret = 0;
+	u8 idx;
+
+	info = IEEE80211_SKB_CB(skb);
+
+	if (info->control.hw_key) {
+		idx = info->control.hw_key->hw_key_idx;
+		if (unlikely(wl->default_key != idx)) {
+			ret = wl12xx_acx_default_key(wl, idx);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	ret = wl12xx_tx_path_status(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_tx_fill_hdr(wl, skb, info);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_tx_send_packet(wl, skb, info);
+	if (ret < 0)
+		return ret;
+
+	wl12xx_tx_trigger(wl);
+
+	return ret;
+}
+
+void wl12xx_tx_work(struct work_struct *work)
+{
+	struct wl12xx *wl = container_of(work, struct wl12xx, tx_work);
+	struct sk_buff *skb;
+	bool woken_up = false;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state == WL12XX_STATE_OFF))
+		goto out;
+
+	while ((skb = skb_dequeue(&wl->tx_queue))) {
+		if (!woken_up) {
+			wl12xx_ps_elp_wakeup(wl);
+			woken_up = true;
+		}
+
+		ret = wl12xx_tx_frame(wl, skb);
+		if (ret == -EBUSY) {
+			/* firmware buffer is full, stop queues */
+			wl12xx_debug(DEBUG_TX, "tx_work: fw buffer full, "
+				     "stop queues");
+			ieee80211_stop_queues(wl->hw);
+			wl->tx_queue_stopped = true;
+			skb_queue_head(&wl->tx_queue, skb);
+			goto out;
+		} else if (ret < 0) {
+			dev_kfree_skb(skb);
+			goto out;
+		}
+	}
+
+out:
+	if (woken_up)
+		wl12xx_ps_elp_sleep(wl);
+
+	mutex_unlock(&wl->mutex);
+}
+
+static const char *wl12xx_tx_parse_status(u8 status)
+{
+	/* 8 bit status field, one character per bit plus null */
+	static char buf[9];
+	int i = 0;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (status & TX_DMA_ERROR)
+		buf[i++] = 'm';
+	if (status & TX_DISABLED)
+		buf[i++] = 'd';
+	if (status & TX_RETRY_EXCEEDED)
+		buf[i++] = 'r';
+	if (status & TX_TIMEOUT)
+		buf[i++] = 't';
+	if (status & TX_KEY_NOT_FOUND)
+		buf[i++] = 'k';
+	if (status & TX_ENCRYPT_FAIL)
+		buf[i++] = 'e';
+	if (status & TX_UNAVAILABLE_PRIORITY)
+		buf[i++] = 'p';
+
+	/* bit 0 is unused apparently */
+
+	return buf;
+}
+
+static void wl12xx_tx_packet_cb(struct wl12xx *wl,
+				struct tx_result *result)
+{
+	struct ieee80211_tx_info *info;
+	struct sk_buff *skb;
+	int hdrlen, ret;
+	u8 *frame;
+
+	skb = wl->tx_frames[result->id];
+	if (skb == NULL) {
+		wl12xx_error("SKB for packet %d is NULL", result->id);
+		return;
+	}
+
+	info = IEEE80211_SKB_CB(skb);
+
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+	    (result->status == TX_SUCCESS))
+		info->flags |= IEEE80211_TX_STAT_ACK;
+
+	info->status.rates[0].count = result->ack_failures + 1;
+	wl->stats.retry_count += result->ack_failures;
+
+	/*
+	 * We have to remove our private TX header before pushing
+	 * the skb back to mac80211.
+	 */
+	frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
+	if (info->control.hw_key &&
+	    info->control.hw_key->alg == ALG_TKIP) {
+		hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+		memmove(frame + WL12XX_TKIP_IV_SPACE, frame, hdrlen);
+		skb_pull(skb, WL12XX_TKIP_IV_SPACE);
+	}
+
+	wl12xx_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
+		     " status 0x%x (%s)",
+		     result->id, skb, result->ack_failures, result->rate,
+		     result->status, wl12xx_tx_parse_status(result->status));
+
+
+	ieee80211_tx_status(wl->hw, skb);
+
+	wl->tx_frames[result->id] = NULL;
+
+	if (wl->tx_queue_stopped) {
+		wl12xx_debug(DEBUG_TX, "cb: queue was stopped");
+
+		skb = skb_dequeue(&wl->tx_queue);
+
+		/* The skb can be NULL because tx_work might have been
+		   scheduled before the queue was stopped making the
+		   queue empty */
+
+		if (skb) {
+			ret = wl12xx_tx_frame(wl, skb);
+			if (ret == -EBUSY) {
+				/* firmware buffer is still full */
+				wl12xx_debug(DEBUG_TX, "cb: fw buffer "
+					     "still full");
+				skb_queue_head(&wl->tx_queue, skb);
+				return;
+			} else if (ret < 0) {
+				dev_kfree_skb(skb);
+				return;
+			}
+		}
+
+		wl12xx_debug(DEBUG_TX, "cb: waking queues");
+		ieee80211_wake_queues(wl->hw);
+		wl->tx_queue_stopped = false;
+	}
+}
+
+/* Called upon reception of a TX complete interrupt */
+void wl12xx_tx_complete(struct wl12xx *wl)
+{
+	int i, result_index, num_complete = 0;
+	struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
+
+	if (unlikely(wl->state != WL12XX_STATE_ON))
+		return;
+
+	/* First we read the result */
+	wl12xx_spi_mem_read(wl, wl->data_path->tx_complete_addr,
+			    result, sizeof(result));
+
+	result_index = wl->next_tx_complete;
+
+	for (i = 0; i < ARRAY_SIZE(result); i++) {
+		result_ptr = &result[result_index];
+
+		if (result_ptr->done_1 == 1 &&
+		    result_ptr->done_2 == 1) {
+			wl12xx_tx_packet_cb(wl, result_ptr);
+
+			result_ptr->done_1 = 0;
+			result_ptr->done_2 = 0;
+
+			result_index = (result_index + 1) &
+				(FW_TX_CMPLT_BLOCK_SIZE - 1);
+			num_complete++;
+		} else {
+			break;
+		}
+	}
+
+	/* Every completed frame needs to be acknowledged */
+	if (num_complete) {
+		/*
+		 * If we've wrapped, we have to clear
+		 * the results in 2 steps.
+		 */
+		if (result_index > wl->next_tx_complete) {
+			/* Only 1 write is needed */
+			wl12xx_spi_mem_write(wl,
+					     wl->data_path->tx_complete_addr +
+					     (wl->next_tx_complete *
+					      sizeof(struct tx_result)),
+					     &result[wl->next_tx_complete],
+					     num_complete *
+					     sizeof(struct tx_result));
+
+
+		} else if (result_index < wl->next_tx_complete) {
+			/* 2 writes are needed */
+			wl12xx_spi_mem_write(wl,
+					     wl->data_path->tx_complete_addr +
+					     (wl->next_tx_complete *
+					      sizeof(struct tx_result)),
+					     &result[wl->next_tx_complete],
+					     (FW_TX_CMPLT_BLOCK_SIZE -
+					      wl->next_tx_complete) *
+					     sizeof(struct tx_result));
+
+			wl12xx_spi_mem_write(wl,
+					     wl->data_path->tx_complete_addr,
+					     result,
+					     (num_complete -
+					      FW_TX_CMPLT_BLOCK_SIZE +
+					      wl->next_tx_complete) *
+					     sizeof(struct tx_result));
+
+		} else {
+			/* We have to write the whole array */
+			wl12xx_spi_mem_write(wl,
+					     wl->data_path->tx_complete_addr,
+					     result,
+					     FW_TX_CMPLT_BLOCK_SIZE *
+					     sizeof(struct tx_result));
+		}
+
+	}
+
+	wl->next_tx_complete = result_index;
+}
+
+/* caller must hold wl->mutex */
+void wl12xx_tx_flush(struct wl12xx *wl)
+{
+	int i;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *info;
+
+	/* TX failure */
+/* 	control->flags = 0; FIXME */
+
+	while ((skb = skb_dequeue(&wl->tx_queue))) {
+		info = IEEE80211_SKB_CB(skb);
+
+		wl12xx_debug(DEBUG_TX, "flushing skb 0x%p", skb);
+
+		if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+				continue;
+
+		ieee80211_tx_status(wl->hw, skb);
+	}
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		if (wl->tx_frames[i] != NULL) {
+			skb = wl->tx_frames[i];
+			info = IEEE80211_SKB_CB(skb);
+
+			if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+				continue;
+
+			ieee80211_tx_status(wl->hw, skb);
+			wl->tx_frames[i] = NULL;
+		}
+}
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
new file mode 100644
index 00000000000..dc82691f4c1
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -0,0 +1,215 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_TX_H__
+#define __WL12XX_TX_H__
+
+#include <linux/bitops.h>
+
+/*
+ *
+ * TX PATH
+ *
+ * The Tx path uses a double buffer and a tx_control structure, each located
+ * at a fixed address in the device's memory. On startup, the host retrieves
+ * the pointers to these addresses. A double buffer allows for continuous data
+ * flow towards the device. The host keeps track of which buffer is available
+ * and alternates between these two buffers on a per packet basis.
+ *
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet - maximum size Ethernet packet + header + descriptor.
+ * TX complete indication will be received a-synchronously in a TX done cyclic
+ * buffer which is composed of 16 tx_result descriptors structures and is used
+ * in a cyclic manner.
+ *
+ * The TX (HOST) procedure is as follows:
+ * 1. Read the Tx path status, that will give the data_out_count.
+ * 2. goto 1, if not possible.
+ *    i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
+ *    buffer).
+ * 3. Copy the packet (preceded by double_buffer_desc), if possible.
+ *    i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
+ *    buffer).
+ * 4. increment data_in_count.
+ * 5. Inform the firmware by generating a firmware internal interrupt.
+ * 6. FW will increment data_out_count after it reads the buffer.
+ *
+ * The TX Complete procedure:
+ * 1. To get a TX complete indication the host enables the tx_complete flag in
+ *    the TX descriptor Structure.
+ * 2. For each packet with a Tx Complete field set, the firmware adds the
+ *    transmit results to the cyclic buffer (txDoneRing) and sets both done_1
+ *    and done_2 to 1 to indicate driver ownership.
+ * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
+ *    host to process the new data. Note: interrupt will be send per packet if
+ *    TX complete indication was requested in tx_control or per crossing
+ *    aggregation threshold.
+ * 4. After receiving the Tx Complete interrupt, the host reads the
+ *    TxDescriptorDone information in a cyclic manner and clears both done_1
+ *    and done_2 fields.
+ *
+ */
+
+#define TX_COMPLETE_REQUIRED_BIT	0x80
+#define TX_STATUS_DATA_OUT_COUNT_MASK   0xf
+#define WL12XX_TX_ALIGN_TO 4
+#define WL12XX_TX_ALIGN(len) (((len) + WL12XX_TX_ALIGN_TO - 1) & \
+			     ~(WL12XX_TX_ALIGN_TO - 1))
+#define WL12XX_TKIP_IV_SPACE 4
+
+struct tx_control {
+	/* Rate Policy (class) index */
+	unsigned rate_policy:3;
+
+	/* When set, no ack policy is expected */
+	unsigned ack_policy:1;
+
+	/*
+	 * Packet type:
+	 * 0 -> 802.11
+	 * 1 -> 802.3
+	 * 2 -> IP
+	 * 3 -> raw codec
+	 */
+	unsigned packet_type:2;
+
+	/* If set, this is a QoS-Null or QoS-Data frame */
+	unsigned qos:1;
+
+	/*
+	 * If set, the target triggers the tx complete INT
+	 * upon frame sending completion.
+	 */
+	unsigned tx_complete:1;
+
+	/* 2 bytes padding before packet header */
+	unsigned xfer_pad:1;
+
+	unsigned reserved:7;
+} __attribute__ ((packed));
+
+
+struct tx_double_buffer_desc {
+	/* Length of payload, including headers. */
+	u16 length;
+
+	/*
+	 * A bit mask that specifies the initial rate to be used
+	 * Possible values are:
+	 * 0x0001 - 1Mbits
+	 * 0x0002 - 2Mbits
+	 * 0x0004 - 5.5Mbits
+	 * 0x0008 - 6Mbits
+	 * 0x0010 - 9Mbits
+	 * 0x0020 - 11Mbits
+	 * 0x0040 - 12Mbits
+	 * 0x0080 - 18Mbits
+	 * 0x0100 - 22Mbits
+	 * 0x0200 - 24Mbits
+	 * 0x0400 - 36Mbits
+	 * 0x0800 - 48Mbits
+	 * 0x1000 - 54Mbits
+	 */
+	u16 rate;
+
+	/* Time in us that a packet can spend in the target */
+	u32 expiry_time;
+
+	/* index of the TX queue used for this packet */
+	u8 xmit_queue;
+
+	/* Used to identify a packet */
+	u8 id;
+
+	struct tx_control control;
+
+	/*
+	 * The FW should cut the packet into fragments
+	 * of this size.
+	 */
+	u16 frag_threshold;
+
+	/* Numbers of HW queue blocks to be allocated */
+	u8 num_mem_blocks;
+
+	u8 reserved;
+} __attribute__ ((packed));
+
+enum {
+	TX_SUCCESS              = 0,
+	TX_DMA_ERROR            = BIT(7),
+	TX_DISABLED             = BIT(6),
+	TX_RETRY_EXCEEDED       = BIT(5),
+	TX_TIMEOUT              = BIT(4),
+	TX_KEY_NOT_FOUND        = BIT(3),
+	TX_ENCRYPT_FAIL         = BIT(2),
+	TX_UNAVAILABLE_PRIORITY = BIT(1),
+};
+
+struct tx_result {
+	/*
+	 * Ownership synchronization between the host and
+	 * the firmware. If done_1 and done_2 are cleared,
+	 * owned by the FW (no info ready).
+	 */
+	u8 done_1;
+
+	/* same as double_buffer_desc->id */
+	u8 id;
+
+	/*
+	 * Total air access duration consumed by this
+	 * packet, including all retries and overheads.
+	 */
+	u16 medium_usage;
+
+	/* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
+	u32 medium_delay;
+
+	/* Time between host xfer and tx complete */
+	u32 fw_hnadling_time;
+
+	/* The LS-byte of the last TKIP sequence number. */
+	u8 lsb_seq_num;
+
+	/* Retry count */
+	u8 ack_failures;
+
+	/* At which rate we got a ACK */
+	u16 rate;
+
+	u16 reserved;
+
+	/* TX_* */
+	u8 status;
+
+	/* See done_1 */
+	u8 done_2;
+} __attribute__ ((packed));
+
+void wl12xx_tx_work(struct work_struct *work);
+void wl12xx_tx_complete(struct wl12xx *wl);
+void wl12xx_tx_flush(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c
new file mode 100644
index 00000000000..ce1561a41fa
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251.c
@@ -0,0 +1,709 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "spi.h"
+#include "boot.h"
+#include "event.h"
+#include "acx.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+
+static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = {
+	[PART_DOWN] = {
+		.mem = {
+			.start = 0x00000000,
+			.size  = 0x00016800
+		},
+		.reg = {
+			.start = REGISTERS_BASE,
+			.size  = REGISTERS_DOWN_SIZE
+		},
+	},
+
+	[PART_WORK] = {
+		.mem = {
+			.start = 0x00028000,
+			.size  = 0x00014000
+		},
+		.reg = {
+			.start = REGISTERS_BASE,
+			.size  = REGISTERS_WORK_SIZE
+		},
+	},
+
+	/* WL1251 doesn't use the DRPW partition, so we don't set it here */
+};
+
+static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = {
+	[ACX_REG_INTERRUPT_TRIG]     = (REGISTERS_BASE + 0x0474),
+	[ACX_REG_INTERRUPT_TRIG_H]   = (REGISTERS_BASE + 0x0478),
+	[ACX_REG_INTERRUPT_MASK]     = (REGISTERS_BASE + 0x0494),
+	[ACX_REG_HINT_MASK_SET]      = (REGISTERS_BASE + 0x0498),
+	[ACX_REG_HINT_MASK_CLR]      = (REGISTERS_BASE + 0x049C),
+	[ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
+	[ACX_REG_INTERRUPT_CLEAR]    = (REGISTERS_BASE + 0x04A4),
+	[ACX_REG_INTERRUPT_ACK]      = (REGISTERS_BASE + 0x04A8),
+	[ACX_REG_SLV_SOFT_RESET]     = (REGISTERS_BASE + 0x0000),
+	[ACX_REG_EE_START]           = (REGISTERS_BASE + 0x080C),
+	[ACX_REG_ECPU_CONTROL]       = (REGISTERS_BASE + 0x0804)
+};
+
+static int wl1251_upload_firmware(struct wl12xx *wl)
+{
+	struct wl12xx_partition_set *p_table = wl->chip.p_table;
+	int addr, chunk_num, partition_limit;
+	size_t fw_data_len;
+	u8 *p;
+
+	/* whal_FwCtrl_LoadFwImageSm() */
+
+	wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
+		     wl12xx_reg_read32(wl, CHIP_ID_B));
+
+	/* 10.0 check firmware length and set partition */
+	fw_data_len =  (wl->fw[4] << 24) | (wl->fw[5] << 16) |
+		(wl->fw[6] << 8) | (wl->fw[7]);
+
+	wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
+		CHUNK_SIZE);
+
+	if ((fw_data_len % 4) != 0) {
+		wl12xx_error("firmware length not multiple of four");
+		return -EIO;
+	}
+
+	wl12xx_set_partition(wl,
+			     p_table[PART_DOWN].mem.start,
+			     p_table[PART_DOWN].mem.size,
+			     p_table[PART_DOWN].reg.start,
+			     p_table[PART_DOWN].reg.size);
+
+	/* 10.1 set partition limit and chunk num */
+	chunk_num = 0;
+	partition_limit = p_table[PART_DOWN].mem.size;
+
+	while (chunk_num < fw_data_len / CHUNK_SIZE) {
+		/* 10.2 update partition, if needed */
+		addr = p_table[PART_DOWN].mem.start +
+			(chunk_num + 2) * CHUNK_SIZE;
+		if (addr > partition_limit) {
+			addr = p_table[PART_DOWN].mem.start +
+				chunk_num * CHUNK_SIZE;
+			partition_limit = chunk_num * CHUNK_SIZE +
+				p_table[PART_DOWN].mem.size;
+			wl12xx_set_partition(wl,
+					     addr,
+					     p_table[PART_DOWN].mem.size,
+					     p_table[PART_DOWN].reg.start,
+					     p_table[PART_DOWN].reg.size);
+		}
+
+		/* 10.3 upload the chunk */
+		addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
+		p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+		wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+			     p, addr);
+		wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE);
+
+		chunk_num++;
+	}
+
+	/* 10.4 upload the last chunk */
+	addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
+	p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+	wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
+		     fw_data_len % CHUNK_SIZE, p, addr);
+	wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+
+	return 0;
+}
+
+static int wl1251_upload_nvs(struct wl12xx *wl)
+{
+	size_t nvs_len, nvs_bytes_written, burst_len;
+	int nvs_start, i;
+	u32 dest_addr, val;
+	u8 *nvs_ptr, *nvs;
+
+	nvs = wl->nvs;
+	if (nvs == NULL)
+		return -ENODEV;
+
+	nvs_ptr = nvs;
+
+	nvs_len = wl->nvs_len;
+	nvs_start = wl->fw_len;
+
+	/*
+	 * Layout before the actual NVS tables:
+	 * 1 byte : burst length.
+	 * 2 bytes: destination address.
+	 * n bytes: data to burst copy.
+	 *
+	 * This is ended by a 0 length, then the NVS tables.
+	 */
+
+	while (nvs_ptr[0]) {
+		burst_len = nvs_ptr[0];
+		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+		/* We move our pointer to the data */
+		nvs_ptr += 3;
+
+		for (i = 0; i < burst_len; i++) {
+			val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+			       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+			wl12xx_debug(DEBUG_BOOT,
+				     "nvs burst write 0x%x: 0x%x",
+				     dest_addr, val);
+			wl12xx_mem_write32(wl, dest_addr, val);
+
+			nvs_ptr += 4;
+			dest_addr += 4;
+		}
+	}
+
+	/*
+	 * We've reached the first zero length, the first NVS table
+	 * is 7 bytes further.
+	 */
+	nvs_ptr += 7;
+	nvs_len -= nvs_ptr - nvs;
+	nvs_len = ALIGN(nvs_len, 4);
+
+	/* Now we must set the partition correctly */
+	wl12xx_set_partition(wl, nvs_start,
+			     wl->chip.p_table[PART_DOWN].mem.size,
+			     wl->chip.p_table[PART_DOWN].reg.start,
+			     wl->chip.p_table[PART_DOWN].reg.size);
+
+	/* And finally we upload the NVS tables */
+	nvs_bytes_written = 0;
+	while (nvs_bytes_written < nvs_len) {
+		val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+		       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+		val = cpu_to_le32(val);
+
+		wl12xx_debug(DEBUG_BOOT,
+			     "nvs write table 0x%x: 0x%x",
+			     nvs_start, val);
+		wl12xx_mem_write32(wl, nvs_start, val);
+
+		nvs_ptr += 4;
+		nvs_bytes_written += 4;
+		nvs_start += 4;
+	}
+
+	return 0;
+}
+
+static int wl1251_boot(struct wl12xx *wl)
+{
+	int ret = 0, minor_minor_e2_ver;
+	u32 tmp, boot_data;
+
+	ret = wl12xx_boot_soft_reset(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 2. start processing NVS file */
+	ret = wl->chip.op_upload_nvs(wl);
+	if (ret < 0)
+		goto out;
+
+	/* write firmware's last address (ie. it's length) to
+	 * ACX_EEPROMLESS_IND_REG */
+	wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+
+	/* 6. read the EEPROM parameters */
+	tmp = wl12xx_reg_read32(wl, SCR_PAD2);
+
+	/* 7. read bootdata */
+	wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
+	wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
+	tmp = wl12xx_reg_read32(wl, SCR_PAD3);
+
+	/* 8. check bootdata and call restart sequence */
+	wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
+	minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
+
+	wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
+		     "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
+		     wl->boot_attr.radio_type, wl->boot_attr.major,
+		     wl->boot_attr.minor, minor_minor_e2_ver);
+
+	ret = wl12xx_boot_init_seq(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 9. NVS processing done */
+	boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+	wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
+
+	/* 10. check that ECPU_CONTROL_HALT bits are set in
+	 * pWhalBus->uBootData and start uploading firmware
+	 */
+	if ((boot_data & ECPU_CONTROL_HALT) == 0) {
+		wl12xx_error("boot failed, ECPU_CONTROL_HALT not set");
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = wl->chip.op_upload_fw(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 10.5 start firmware */
+	ret = wl12xx_boot_run_firmware(wl);
+	if (ret < 0)
+		goto out;
+
+	/* Get and save the firmware version */
+	wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver));
+
+out:
+	return ret;
+}
+
+static int wl1251_mem_cfg(struct wl12xx *wl)
+{
+	struct wl1251_acx_config_memory mem_conf;
+	int ret, i;
+
+	wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg");
+
+	/* memory config */
+	mem_conf.mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+	mem_conf.mem_config.rx_mem_block_num = 35;
+	mem_conf.mem_config.tx_min_mem_block_num = 64;
+	mem_conf.mem_config.num_tx_queues = MAX_TX_QUEUES;
+	mem_conf.mem_config.host_if_options = HOSTIF_PKT_RING;
+	mem_conf.mem_config.num_ssid_profiles = 1;
+	mem_conf.mem_config.debug_buffer_size =
+		cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
+
+	/* RX queue config */
+	mem_conf.rx_queue_config.dma_address = 0;
+	mem_conf.rx_queue_config.num_descs = ACX_RX_DESC_DEF;
+	mem_conf.rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
+	mem_conf.rx_queue_config.type = DEFAULT_RXQ_TYPE;
+
+	/* TX queue config */
+	for (i = 0; i < MAX_TX_QUEUES; i++) {
+		mem_conf.tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
+		mem_conf.tx_queue_config[i].attributes = i;
+	}
+
+	mem_conf.header.id = ACX_MEM_CFG;
+	mem_conf.header.len = sizeof(struct wl1251_acx_config_memory) -
+		sizeof(struct acx_header);
+	mem_conf.header.len -=
+		(MAX_TX_QUEUE_CONFIGS - mem_conf.mem_config.num_tx_queues) *
+		sizeof(struct wl1251_acx_tx_queue_config);
+
+	ret = wl12xx_cmd_configure(wl, &mem_conf,
+				   sizeof(struct wl1251_acx_config_memory));
+	if (ret < 0)
+		wl12xx_warning("wl1251 mem config failed: %d", ret);
+
+	return ret;
+}
+
+static int wl1251_hw_init_mem_config(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl1251_mem_cfg(wl);
+	if (ret < 0)
+		return ret;
+
+	wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
+					  GFP_KERNEL);
+	if (!wl->target_mem_map) {
+		wl12xx_error("couldn't allocate target memory map");
+		return -ENOMEM;
+	}
+
+	/* we now ask for the firmware built memory map */
+	ret = wl12xx_acx_mem_map(wl, wl->target_mem_map,
+				 sizeof(struct wl1251_acx_mem_map));
+	if (ret < 0) {
+		wl12xx_error("couldn't retrieve firmware memory map");
+		kfree(wl->target_mem_map);
+		wl->target_mem_map = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag)
+{
+	u32 cpu_ctrl;
+
+	/* 10.5.0 run the firmware (I) */
+	cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+	/* 10.5.1 run the firmware (II) */
+	cpu_ctrl &= ~flag;
+	wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+static void wl1251_target_enable_interrupts(struct wl12xx *wl)
+{
+	/* Enable target's interrupts */
+	wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
+		WL1251_ACX_INTR_RX1_DATA |
+		WL1251_ACX_INTR_TX_RESULT |
+		WL1251_ACX_INTR_EVENT_A |
+		WL1251_ACX_INTR_EVENT_B |
+		WL1251_ACX_INTR_INIT_COMPLETE;
+	wl12xx_boot_target_enable_interrupts(wl);
+}
+
+static void wl1251_irq_work(struct work_struct *work)
+{
+	u32 intr;
+	struct wl12xx *wl =
+		container_of(work, struct wl12xx, irq_work);
+
+	mutex_lock(&wl->mutex);
+
+	wl12xx_debug(DEBUG_IRQ, "IRQ work");
+
+	if (wl->state == WL12XX_STATE_OFF)
+		goto out;
+
+	wl12xx_ps_elp_wakeup(wl);
+
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
+
+	intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+	wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr);
+
+	if (wl->data_path) {
+		wl12xx_spi_mem_read(wl, wl->data_path->rx_control_addr,
+				    &wl->rx_counter, sizeof(u32));
+
+		/* We handle a frmware bug here */
+		switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
+		case 0:
+			wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync");
+			intr &= ~WL1251_ACX_INTR_RX0_DATA;
+			intr &= ~WL1251_ACX_INTR_RX1_DATA;
+			break;
+		case 1:
+			wl12xx_debug(DEBUG_IRQ, "RX: FW +1");
+			intr |= WL1251_ACX_INTR_RX0_DATA;
+			intr &= ~WL1251_ACX_INTR_RX1_DATA;
+			break;
+		case 2:
+			wl12xx_debug(DEBUG_IRQ, "RX: FW +2");
+			intr |= WL1251_ACX_INTR_RX0_DATA;
+			intr |= WL1251_ACX_INTR_RX1_DATA;
+			break;
+		default:
+			wl12xx_warning("RX: FW and host out of sync: %d",
+				       wl->rx_counter - wl->rx_handled);
+			break;
+		}
+
+		wl->rx_handled = wl->rx_counter;
+
+
+		wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
+	}
+
+	intr &= wl->intr_mask;
+
+	if (intr == 0) {
+		wl12xx_debug(DEBUG_IRQ, "INTR is 0");
+		wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+				   ~(wl->intr_mask));
+
+		goto out_sleep;
+	}
+
+	if (intr & WL1251_ACX_INTR_RX0_DATA) {
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
+		wl12xx_rx(wl);
+	}
+
+	if (intr & WL1251_ACX_INTR_RX1_DATA) {
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
+		wl12xx_rx(wl);
+	}
+
+	if (intr & WL1251_ACX_INTR_TX_RESULT) {
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
+		wl12xx_tx_complete(wl);
+	}
+
+	if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
+		if (intr & WL1251_ACX_INTR_EVENT_A)
+			wl12xx_event_handle(wl, 0);
+		else
+			wl12xx_event_handle(wl, 1);
+	}
+
+	if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
+		wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
+
+	wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+
+out_sleep:
+	wl12xx_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_hw_init_txq_fill(u8 qid,
+				   struct acx_tx_queue_qos_config *config,
+				   u32 num_blocks)
+{
+	config->qid = qid;
+
+	switch (qid) {
+	case QOS_AC_BE:
+		config->high_threshold =
+			(QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_BE_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_BK:
+		config->high_threshold =
+			(QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_BK_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_VI:
+		config->high_threshold =
+			(QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_VI_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_VO:
+		config->high_threshold =
+			(QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_VO_DEF * num_blocks) / 100;
+		break;
+	default:
+		wl12xx_error("Invalid TX queue id: %d", qid);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl)
+{
+	struct acx_tx_queue_qos_config config;
+	struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
+	int ret, i;
+
+	wl12xx_debug(DEBUG_ACX, "acx tx queue config");
+
+	config.header.id = ACX_TX_QUEUE_CFG;
+	config.header.len = sizeof(struct acx_tx_queue_qos_config) -
+		sizeof(struct acx_header);
+
+	for (i = 0; i < MAX_NUM_OF_AC; i++) {
+		ret = wl1251_hw_init_txq_fill(i, &config,
+					      wl_mem_map->num_tx_mem_blocks);
+		if (ret < 0)
+			return ret;
+
+		ret = wl12xx_cmd_configure(wl, &config, sizeof(config));
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int wl1251_hw_init_data_path_config(struct wl12xx *wl)
+{
+	int ret;
+
+	/* asking for the data path parameters */
+	wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
+				GFP_KERNEL);
+	if (!wl->data_path) {
+		wl12xx_error("Couldnt allocate data path parameters");
+		return -ENOMEM;
+	}
+
+	ret = wl12xx_acx_data_path_params(wl, wl->data_path);
+	if (ret < 0) {
+		kfree(wl->data_path);
+		wl->data_path = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static int wl1251_hw_init(struct wl12xx *wl)
+{
+	struct wl1251_acx_mem_map *wl_mem_map;
+	int ret;
+
+	ret = wl12xx_hw_init_hwenc_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Template settings */
+	ret = wl12xx_hw_init_templates_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Default memory configuration */
+	ret = wl1251_hw_init_mem_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Default data path configuration  */
+	ret = wl1251_hw_init_data_path_config(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* RX config */
+	ret = wl12xx_hw_init_rx_config(wl,
+				       RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+				       RX_FILTER_OPTION_DEF);
+	/* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
+	   RX_FILTER_OPTION_FILTER_ALL); */
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* TX queues config */
+	ret = wl1251_hw_init_tx_queue_config(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* PHY layer config */
+	ret = wl12xx_hw_init_phy_config(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Beacon filtering */
+	ret = wl12xx_hw_init_beacon_filter(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Bluetooth WLAN coexistence */
+	ret = wl12xx_hw_init_pta(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Energy detection */
+	ret = wl12xx_hw_init_energy_detection(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Beacons and boradcast settings */
+	ret = wl12xx_hw_init_beacon_broadcast(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Enable data path */
+	ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Default power state */
+	ret = wl12xx_hw_init_power_auth(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	wl_mem_map = wl->target_mem_map;
+	wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
+		    wl_mem_map->num_tx_mem_blocks,
+		    wl->data_path->tx_control_addr,
+		    wl_mem_map->num_rx_mem_blocks,
+		    wl->data_path->rx_control_addr);
+
+	return 0;
+
+ out_free_data_path:
+	kfree(wl->data_path);
+
+ out_free_memmap:
+	kfree(wl->target_mem_map);
+
+	return ret;
+}
+
+static int wl1251_plt_init(struct wl12xx *wl)
+{
+	int ret;
+
+	ret = wl1251_hw_init_mem_config(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void wl1251_setup(struct wl12xx *wl)
+{
+	/* FIXME: Is it better to use strncpy here or is this ok? */
+	wl->chip.fw_filename = WL1251_FW_NAME;
+	wl->chip.nvs_filename = WL1251_NVS_NAME;
+
+	/* Now we know what chip we're using, so adjust the power on sleep
+	 * time accordingly */
+	wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP;
+
+	wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE;
+	wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE;
+
+	wl->chip.op_upload_nvs = wl1251_upload_nvs;
+	wl->chip.op_upload_fw = wl1251_upload_firmware;
+	wl->chip.op_boot = wl1251_boot;
+	wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl;
+	wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts;
+	wl->chip.op_hw_init = wl1251_hw_init;
+	wl->chip.op_plt_init = wl1251_plt_init;
+
+	wl->chip.p_table = wl1251_part_table;
+	wl->chip.acx_reg_table = wl1251_acx_reg_table;
+
+	INIT_WORK(&wl->irq_work, wl1251_irq_work);
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
new file mode 100644
index 00000000000..1f4a4433039
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -0,0 +1,165 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_H__
+#define __WL1251_H__
+
+#include <linux/bitops.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+
+#define WL1251_FW_NAME "wl1251-fw.bin"
+#define WL1251_NVS_NAME "wl1251-nvs.bin"
+
+#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+
+void wl1251_setup(struct wl12xx *wl);
+
+
+struct wl1251_acx_memory {
+	__le16 num_stations; /* number of STAs to be supported. */
+	u16 reserved_1;
+
+	/*
+	 * Nmber of memory buffers for the RX mem pool.
+	 * The actual number may be less if there are
+	 * not enough blocks left for the minimum num
+	 * of TX ones.
+	 */
+	u8 rx_mem_block_num;
+	u8 reserved_2;
+	u8 num_tx_queues; /* From 1 to 16 */
+	u8 host_if_options; /* HOST_IF* */
+	u8 tx_min_mem_block_num;
+	u8 num_ssid_profiles;
+	__le16 debug_buffer_size;
+} __attribute__ ((packed));
+
+
+#define ACX_RX_DESC_MIN                1
+#define ACX_RX_DESC_MAX                127
+#define ACX_RX_DESC_DEF                32
+struct wl1251_acx_rx_queue_config {
+	u8 num_descs;
+	u8 pad;
+	u8 type;
+	u8 priority;
+	__le32 dma_address;
+} __attribute__ ((packed));
+
+#define ACX_TX_DESC_MIN                1
+#define ACX_TX_DESC_MAX                127
+#define ACX_TX_DESC_DEF                16
+struct wl1251_acx_tx_queue_config {
+    u8 num_descs;
+    u8 pad[2];
+    u8 attributes;
+} __attribute__ ((packed));
+
+#define MAX_TX_QUEUE_CONFIGS 5
+#define MAX_TX_QUEUES 4
+struct wl1251_acx_config_memory {
+	struct acx_header header;
+
+	struct wl1251_acx_memory mem_config;
+	struct wl1251_acx_rx_queue_config rx_queue_config;
+	struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
+} __attribute__ ((packed));
+
+struct wl1251_acx_mem_map {
+	struct acx_header header;
+
+	void *code_start;
+	void *code_end;
+
+	void *wep_defkey_start;
+	void *wep_defkey_end;
+
+	void *sta_table_start;
+	void *sta_table_end;
+
+	void *packet_template_start;
+	void *packet_template_end;
+
+	void *queue_memory_start;
+	void *queue_memory_end;
+
+	void *packet_memory_pool_start;
+	void *packet_memory_pool_end;
+
+	void *debug_buffer1_start;
+	void *debug_buffer1_end;
+
+	void *debug_buffer2_start;
+	void *debug_buffer2_end;
+
+	/* Number of blocks FW allocated for TX packets */
+	u32 num_tx_mem_blocks;
+
+	/* Number of blocks FW allocated for RX packets */
+	u32 num_rx_mem_blocks;
+} __attribute__ ((packed));
+
+/*************************************************************************
+
+    Host Interrupt Register (WiLink -> Host)
+
+**************************************************************************/
+
+/* RX packet is ready in Xfer buffer #0 */
+#define WL1251_ACX_INTR_RX0_DATA      BIT(0)
+
+/* TX result(s) are in the TX complete buffer */
+#define WL1251_ACX_INTR_TX_RESULT	BIT(1)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_TX_XFR		BIT(2)
+
+/* RX packet is ready in Xfer buffer #1 */
+#define WL1251_ACX_INTR_RX1_DATA	BIT(3)
+
+/* Event was entered to Event MBOX #A */
+#define WL1251_ACX_INTR_EVENT_A		BIT(4)
+
+/* Event was entered to Event MBOX #B */
+#define WL1251_ACX_INTR_EVENT_B		BIT(5)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_WAKE_ON_HOST	BIT(6)
+
+/* Trace meassge on MBOX #A */
+#define WL1251_ACX_INTR_TRACE_A		BIT(7)
+
+/* Trace meassge on MBOX #B */
+#define WL1251_ACX_INTR_TRACE_B		BIT(8)
+
+/* Command processing completion */
+#define WL1251_ACX_INTR_CMD_COMPLETE	BIT(9)
+
+/* Init sequence is done */
+#define WL1251_ACX_INTR_INIT_COMPLETE	BIT(14)
+
+#define WL1251_ACX_INTR_ALL           0xFFFFFFFF
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
new file mode 100644
index 00000000000..48641437414
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -0,0 +1,409 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_H__
+#define __WL12XX_H__
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <net/mac80211.h>
+
+#define DRIVER_NAME "wl12xx"
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+	DEBUG_NONE	= 0,
+	DEBUG_IRQ	= BIT(0),
+	DEBUG_SPI	= BIT(1),
+	DEBUG_BOOT	= BIT(2),
+	DEBUG_MAILBOX	= BIT(3),
+	DEBUG_NETLINK	= BIT(4),
+	DEBUG_EVENT	= BIT(5),
+	DEBUG_TX	= BIT(6),
+	DEBUG_RX	= BIT(7),
+	DEBUG_SCAN	= BIT(8),
+	DEBUG_CRYPT	= BIT(9),
+	DEBUG_PSM	= BIT(10),
+	DEBUG_MAC80211	= BIT(11),
+	DEBUG_CMD	= BIT(12),
+	DEBUG_ACX	= BIT(13),
+	DEBUG_ALL	= ~0,
+};
+
+#define DEBUG_LEVEL (DEBUG_NONE)
+
+#define DEBUG_DUMP_LIMIT 1024
+
+#define wl12xx_error(fmt, arg...) \
+	printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define wl12xx_warning(fmt, arg...) \
+	printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define wl12xx_notice(fmt, arg...) \
+	printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl12xx_info(fmt, arg...) \
+	printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl12xx_debug(level, fmt, arg...) \
+	do { \
+		if (level & DEBUG_LEVEL) \
+			printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+	} while (0)
+
+#define wl12xx_dump(level, prefix, buf, len)	\
+	do { \
+		if (level & DEBUG_LEVEL) \
+			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+				       DUMP_PREFIX_OFFSET, 16, 1,	\
+				       buf,				\
+				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+				       0);				\
+	} while (0)
+
+#define wl12xx_dump_ascii(level, prefix, buf, len)	\
+	do { \
+		if (level & DEBUG_LEVEL) \
+			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+				       DUMP_PREFIX_OFFSET, 16, 1,	\
+				       buf,				\
+				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+				       true);				\
+	} while (0)
+
+#define WL12XX_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN |	\
+				  CFG_BSSID_FILTER_EN)
+
+#define WL12XX_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN |  \
+				  CFG_RX_MGMT_EN |  \
+				  CFG_RX_DATA_EN |  \
+				  CFG_RX_CTL_EN |   \
+				  CFG_RX_BCN_EN |   \
+				  CFG_RX_AUTH_EN |  \
+				  CFG_RX_ASSOC_EN)
+
+
+struct boot_attr {
+	u32 radio_type;
+	u8 mac_clock;
+	u8 arm_clock;
+	int firmware_debug;
+	u32 minor;
+	u32 major;
+	u32 bugfix;
+};
+
+enum wl12xx_state {
+	WL12XX_STATE_OFF,
+	WL12XX_STATE_ON,
+	WL12XX_STATE_PLT,
+};
+
+enum wl12xx_partition_type {
+	PART_DOWN,
+	PART_WORK,
+	PART_DRPW,
+
+	PART_TABLE_LEN
+};
+
+struct wl12xx_partition {
+	u32 size;
+	u32 start;
+};
+
+struct wl12xx_partition_set {
+	struct wl12xx_partition mem;
+	struct wl12xx_partition reg;
+};
+
+struct wl12xx;
+
+/* FIXME: I'm not sure about this structure name */
+struct wl12xx_chip {
+	u32 id;
+
+	const char *fw_filename;
+	const char *nvs_filename;
+
+	char fw_ver[21];
+
+	unsigned int power_on_sleep;
+	int intr_cmd_complete;
+	int intr_init_complete;
+
+	int (*op_upload_fw)(struct wl12xx *wl);
+	int (*op_upload_nvs)(struct wl12xx *wl);
+	int (*op_boot)(struct wl12xx *wl);
+	void (*op_set_ecpu_ctrl)(struct wl12xx *wl, u32 flag);
+	void (*op_target_enable_interrupts)(struct wl12xx *wl);
+	int (*op_hw_init)(struct wl12xx *wl);
+	int (*op_plt_init)(struct wl12xx *wl);
+
+	struct wl12xx_partition_set *p_table;
+	enum wl12xx_acx_int_reg *acx_reg_table;
+};
+
+struct wl12xx_stats {
+	struct acx_statistics *fw_stats;
+	unsigned long fw_stats_update;
+
+	unsigned int retry_count;
+	unsigned int excessive_retries;
+};
+
+struct wl12xx_debugfs {
+	struct dentry *rootdir;
+	struct dentry *fw_statistics;
+
+	struct dentry *tx_internal_desc_overflow;
+
+	struct dentry *rx_out_of_mem;
+	struct dentry *rx_hdr_overflow;
+	struct dentry *rx_hw_stuck;
+	struct dentry *rx_dropped;
+	struct dentry *rx_fcs_err;
+	struct dentry *rx_xfr_hint_trig;
+	struct dentry *rx_path_reset;
+	struct dentry *rx_reset_counter;
+
+	struct dentry *dma_rx_requested;
+	struct dentry *dma_rx_errors;
+	struct dentry *dma_tx_requested;
+	struct dentry *dma_tx_errors;
+
+	struct dentry *isr_cmd_cmplt;
+	struct dentry *isr_fiqs;
+	struct dentry *isr_rx_headers;
+	struct dentry *isr_rx_mem_overflow;
+	struct dentry *isr_rx_rdys;
+	struct dentry *isr_irqs;
+	struct dentry *isr_tx_procs;
+	struct dentry *isr_decrypt_done;
+	struct dentry *isr_dma0_done;
+	struct dentry *isr_dma1_done;
+	struct dentry *isr_tx_exch_complete;
+	struct dentry *isr_commands;
+	struct dentry *isr_rx_procs;
+	struct dentry *isr_hw_pm_mode_changes;
+	struct dentry *isr_host_acknowledges;
+	struct dentry *isr_pci_pm;
+	struct dentry *isr_wakeups;
+	struct dentry *isr_low_rssi;
+
+	struct dentry *wep_addr_key_count;
+	struct dentry *wep_default_key_count;
+	/* skipping wep.reserved */
+	struct dentry *wep_key_not_found;
+	struct dentry *wep_decrypt_fail;
+	struct dentry *wep_packets;
+	struct dentry *wep_interrupt;
+
+	struct dentry *pwr_ps_enter;
+	struct dentry *pwr_elp_enter;
+	struct dentry *pwr_missing_bcns;
+	struct dentry *pwr_wake_on_host;
+	struct dentry *pwr_wake_on_timer_exp;
+	struct dentry *pwr_tx_with_ps;
+	struct dentry *pwr_tx_without_ps;
+	struct dentry *pwr_rcvd_beacons;
+	struct dentry *pwr_power_save_off;
+	struct dentry *pwr_enable_ps;
+	struct dentry *pwr_disable_ps;
+	struct dentry *pwr_fix_tsf_ps;
+	/* skipping cont_miss_bcns_spread for now */
+	struct dentry *pwr_rcvd_awake_beacons;
+
+	struct dentry *mic_rx_pkts;
+	struct dentry *mic_calc_failure;
+
+	struct dentry *aes_encrypt_fail;
+	struct dentry *aes_decrypt_fail;
+	struct dentry *aes_encrypt_packets;
+	struct dentry *aes_decrypt_packets;
+	struct dentry *aes_encrypt_interrupt;
+	struct dentry *aes_decrypt_interrupt;
+
+	struct dentry *event_heart_beat;
+	struct dentry *event_calibration;
+	struct dentry *event_rx_mismatch;
+	struct dentry *event_rx_mem_empty;
+	struct dentry *event_rx_pool;
+	struct dentry *event_oom_late;
+	struct dentry *event_phy_transmit_error;
+	struct dentry *event_tx_stuck;
+
+	struct dentry *ps_pspoll_timeouts;
+	struct dentry *ps_upsd_timeouts;
+	struct dentry *ps_upsd_max_sptime;
+	struct dentry *ps_upsd_max_apturn;
+	struct dentry *ps_pspoll_max_apturn;
+	struct dentry *ps_pspoll_utilization;
+	struct dentry *ps_upsd_utilization;
+
+	struct dentry *rxpipe_rx_prep_beacon_drop;
+	struct dentry *rxpipe_descr_host_int_trig_rx_data;
+	struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
+	struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
+	struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
+
+	struct dentry *tx_queue_len;
+
+	struct dentry *retry_count;
+	struct dentry *excessive_retries;
+};
+
+struct wl12xx {
+	struct ieee80211_hw *hw;
+	bool mac80211_registered;
+
+	struct spi_device *spi;
+
+	void (*set_power)(bool enable);
+	int irq;
+
+	enum wl12xx_state state;
+	struct mutex mutex;
+
+	int physical_mem_addr;
+	int physical_reg_addr;
+	int virtual_mem_addr;
+	int virtual_reg_addr;
+
+	struct wl12xx_chip chip;
+
+	int cmd_box_addr;
+	int event_box_addr;
+	struct boot_attr boot_attr;
+
+	u8 *fw;
+	size_t fw_len;
+	u8 *nvs;
+	size_t nvs_len;
+
+	u8 bssid[ETH_ALEN];
+	u8 mac_addr[ETH_ALEN];
+	u8 bss_type;
+	u8 listen_int;
+	int channel;
+
+	void *target_mem_map;
+	struct acx_data_path_params_resp *data_path;
+
+	/* Number of TX packets transferred to the FW, modulo 16 */
+	u32 data_in_count;
+
+	/* Frames scheduled for transmission, not handled yet */
+	struct sk_buff_head tx_queue;
+	bool tx_queue_stopped;
+
+	struct work_struct tx_work;
+	struct work_struct filter_work;
+
+	/* Pending TX frames */
+	struct sk_buff *tx_frames[16];
+
+	/*
+	 * Index pointing to the next TX complete entry
+	 * in the cyclic XT complete array we get from
+	 * the FW.
+	 */
+	u32 next_tx_complete;
+
+	/* FW Rx counter */
+	u32 rx_counter;
+
+	/* Rx frames handled */
+	u32 rx_handled;
+
+	/* Current double buffer */
+	u32 rx_current_buffer;
+	u32 rx_last_id;
+
+	/* The target interrupt mask */
+	u32 intr_mask;
+	struct work_struct irq_work;
+
+	/* The mbox event mask */
+	u32 event_mask;
+
+	/* Mailbox pointers */
+	u32 mbox_ptr[2];
+
+	/* Are we currently scanning */
+	bool scanning;
+
+	/* Our association ID */
+	u16 aid;
+
+	/* Default key (for WEP) */
+	u32 default_key;
+
+	unsigned int tx_mgmt_frm_rate;
+	unsigned int tx_mgmt_frm_mod;
+
+	unsigned int rx_config;
+	unsigned int rx_filter;
+
+	/* is firmware in elp mode */
+	bool elp;
+
+	/* we can be in psm, but not in elp, we have to differentiate */
+	bool psm;
+
+	/* PSM mode requested */
+	bool psm_requested;
+
+	/* in dBm */
+	int power_level;
+
+	struct wl12xx_stats stats;
+	struct wl12xx_debugfs debugfs;
+};
+
+int wl12xx_plt_start(struct wl12xx *wl);
+int wl12xx_plt_stop(struct wl12xx *wl);
+
+#define DEFAULT_HW_GEN_MODULATION_TYPE    CCK_LONG /* Long Preamble */
+#define DEFAULT_HW_GEN_TX_RATE          RATE_2MBPS
+#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */
+
+#define WL12XX_DEFAULT_POWER_LEVEL 20
+
+#define WL12XX_TX_QUEUE_MAX_LENGTH 20
+
+/* Different chips need different sleep times after power on.  WL1271 needs
+ * 200ms, WL1251 needs only 10ms.  By default we use 200ms, but as soon as we
+ * know the chip ID, we change the sleep value in the wl12xx chip structure,
+ * so in subsequent power ons, we don't waste more time then needed.  */
+#define WL12XX_DEFAULT_POWER_ON_SLEEP 200
+
+#define CHIP_ID_1251_PG10	           (0x7010101)
+#define CHIP_ID_1251_PG11	           (0x7020101)
+#define CHIP_ID_1251_PG12	           (0x7030101)
+#define CHIP_ID_1271_PG10	           (0x4030101)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/wl12xx/wl12xx_80211.h
new file mode 100644
index 00000000000..657c2dbcb7d
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl12xx_80211.h
@@ -0,0 +1,156 @@
+#ifndef __WL12XX_80211_H__
+#define __WL12XX_80211_H__
+
+#include <linux/if_ether.h>	/* ETH_ALEN */
+
+/* RATES */
+#define IEEE80211_CCK_RATE_1MB		        0x02
+#define IEEE80211_CCK_RATE_2MB		        0x04
+#define IEEE80211_CCK_RATE_5MB		        0x0B
+#define IEEE80211_CCK_RATE_11MB		        0x16
+#define IEEE80211_OFDM_RATE_6MB		        0x0C
+#define IEEE80211_OFDM_RATE_9MB		        0x12
+#define IEEE80211_OFDM_RATE_12MB		0x18
+#define IEEE80211_OFDM_RATE_18MB		0x24
+#define IEEE80211_OFDM_RATE_24MB		0x30
+#define IEEE80211_OFDM_RATE_36MB		0x48
+#define IEEE80211_OFDM_RATE_48MB		0x60
+#define IEEE80211_OFDM_RATE_54MB		0x6C
+#define IEEE80211_BASIC_RATE_MASK		0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
+
+#define IEEE80211_CCK_RATES_MASK	  0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK	 (IEEE80211_CCK_RATE_1MB_MASK | \
+	IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
+	IEEE80211_CCK_RATE_5MB_MASK | \
+	IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK	  0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK	  (IEEE80211_OFDM_RATE_6MB_MASK | \
+	IEEE80211_OFDM_RATE_12MB_MASK | \
+	IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
+	IEEE80211_OFDM_RATE_9MB_MASK  | \
+	IEEE80211_OFDM_RATE_18MB_MASK | \
+	IEEE80211_OFDM_RATE_36MB_MASK | \
+	IEEE80211_OFDM_RATE_48MB_MASK | \
+	IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+				      IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+
+/* This really should be 8, but not for our firmware */
+#define MAX_SUPPORTED_RATES 32
+#define COUNTRY_STRING_LEN 3
+#define MAX_COUNTRY_TRIPLETS 32
+
+/* Headers */
+struct ieee80211_header {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 da[ETH_ALEN];
+	u8 sa[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 payload[0];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_header {
+	u8 id;
+	u8 len;
+} __attribute__ ((packed));
+
+/* IEs */
+
+struct wl12xx_ie_ssid {
+	struct wl12xx_ie_header header;
+	char ssid[IW_ESSID_MAX_SIZE];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_rates {
+	struct wl12xx_ie_header header;
+	u8 rates[MAX_SUPPORTED_RATES];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_ds_params {
+	struct wl12xx_ie_header header;
+	u8 channel;
+} __attribute__ ((packed));
+
+struct country_triplet {
+	u8 channel;
+	u8 num_channels;
+	u8 max_tx_power;
+} __attribute__ ((packed));
+
+struct wl12xx_ie_country {
+	struct wl12xx_ie_header header;
+	u8 country_string[COUNTRY_STRING_LEN];
+	struct country_triplet triplets[MAX_COUNTRY_TRIPLETS];
+} __attribute__ ((packed));
+
+
+/* Templates */
+
+struct wl12xx_beacon_template {
+	struct ieee80211_header header;
+	__le32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+	struct wl12xx_ie_ds_params ds_params;
+	struct wl12xx_ie_country country;
+} __attribute__ ((packed));
+
+struct wl12xx_null_data_template {
+	struct ieee80211_header header;
+} __attribute__ ((packed));
+
+struct wl12xx_ps_poll_template {
+	u16 fc;
+	u16 aid;
+	u8 bssid[ETH_ALEN];
+	u8 ta[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct wl12xx_qos_null_data_template {
+	struct ieee80211_header header;
+	__le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct wl12xx_probe_req_template {
+	struct ieee80211_header header;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+} __attribute__ ((packed));
+
+
+struct wl12xx_probe_resp_template {
+	struct ieee80211_header header;
+	__le32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+	struct wl12xx_ie_ds_params ds_params;
+	struct wl12xx_ie_country country;
+} __attribute__ ((packed));
+
+#endif
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 1f64d6033ab..e3e96bb2c24 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1348,6 +1348,7 @@ static int wl3501_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (rc) {
 		++dev->stats.tx_dropped;
 		netif_stop_queue(dev);
+		rc = NETDEV_TX_OK;
 	} else {
 		++dev->stats.tx_packets;
 		dev->stats.tx_bytes += skb->len;
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 5fabd9c0f07..4430b8d92e2 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -819,11 +819,11 @@ static int zd1201_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (err) {
 		dev->stats.tx_errors++;
 		netif_start_queue(dev);
-		return err;
+	} else {
+		dev->stats.tx_packets++;
+		dev->stats.tx_bytes += skb->len;
+		dev->trans_start = jiffies;
 	}
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += skb->len;
-	dev->trans_start = jiffies;
 	kfree_skb(skb);
 
 	return 0;
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index c3a51266de2..40b07b98822 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -420,9 +420,9 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
 	if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
 		cs->control |= ZD_CS_NEED_RANDOM_BACKOFF;
 
-	/* Multicast */
-	if (is_multicast_ether_addr(header->addr1))
-		cs->control |= ZD_CS_MULTICAST;
+	/* No ACK expected (multicast, etc.) */
+	if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+		cs->control |= ZD_CS_NO_ACK;
 
 	/* PS-POLL */
 	if (ieee80211_is_pspoll(header->frame_control))
@@ -755,52 +755,6 @@ static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
 	return zd_chip_set_channel(&mac->chip, conf->channel->hw_value);
 }
 
-static int zd_op_config_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif,
-				   struct ieee80211_if_conf *conf)
-{
-	struct zd_mac *mac = zd_hw_mac(hw);
-	int associated;
-	int r;
-
-	if (mac->type == NL80211_IFTYPE_MESH_POINT ||
-	    mac->type == NL80211_IFTYPE_ADHOC) {
-		associated = true;
-		if (conf->changed & IEEE80211_IFCC_BEACON) {
-			struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-
-			if (!beacon)
-				return -ENOMEM;
-			r = zd_mac_config_beacon(hw, beacon);
-			kfree_skb(beacon);
-
-			if (r < 0)
-				return r;
-		}
-
-		if (conf->changed & IEEE80211_IFCC_BEACON_ENABLED) {
-			u32 interval;
-
-			if (conf->enable_beacon)
-				interval = BCN_MODE_IBSS | hw->conf.beacon_int;
-			else
-				interval = 0;
-
-			r = zd_set_beacon_interval(&mac->chip, interval);
-			if (r < 0)
-				return r;
-		}
-	} else
-		associated = is_valid_ether_addr(conf->bssid);
-
-	spin_lock_irq(&mac->lock);
-	mac->associated = associated;
-	spin_unlock_irq(&mac->lock);
-
-	/* TODO: do hardware bssid filtering */
-	return 0;
-}
-
 static void zd_process_intr(struct work_struct *work)
 {
 	u16 int_status;
@@ -923,9 +877,42 @@ static void zd_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct zd_mac *mac = zd_hw_mac(hw);
 	unsigned long flags;
+	int associated;
 
 	dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes);
 
+	if (mac->type == NL80211_IFTYPE_MESH_POINT ||
+	    mac->type == NL80211_IFTYPE_ADHOC) {
+		associated = true;
+		if (changes & BSS_CHANGED_BEACON) {
+			struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+			if (beacon) {
+				zd_mac_config_beacon(hw, beacon);
+				kfree_skb(beacon);
+			}
+		}
+
+		if (changes & BSS_CHANGED_BEACON_ENABLED) {
+			u32 interval;
+
+			if (bss_conf->enable_beacon)
+				interval = BCN_MODE_IBSS |
+						bss_conf->beacon_int;
+			else
+				interval = 0;
+
+			zd_set_beacon_interval(&mac->chip, interval);
+		}
+	} else
+		associated = is_valid_ether_addr(bss_conf->bssid);
+
+	spin_lock_irq(&mac->lock);
+	mac->associated = associated;
+	spin_unlock_irq(&mac->lock);
+
+	/* TODO: do hardware bssid filtering */
+
 	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
 		spin_lock_irqsave(&mac->lock, flags);
 		mac->short_preamble = bss_conf->use_short_preamble;
@@ -952,7 +939,6 @@ static const struct ieee80211_ops zd_ops = {
 	.add_interface		= zd_op_add_interface,
 	.remove_interface	= zd_op_remove_interface,
 	.config			= zd_op_config,
-	.config_interface	= zd_op_config_interface,
 	.configure_filter	= zd_op_configure_filter,
 	.bss_info_changed	= zd_op_bss_info_changed,
 	.get_tsf		= zd_op_get_tsf,
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index 4c05d3ee4c3..7c2759118d1 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -87,7 +87,7 @@ struct zd_ctrlset {
 
 /* zd_ctrlset control field */
 #define ZD_CS_NEED_RANDOM_BACKOFF	0x01
-#define ZD_CS_MULTICAST			0x02
+#define ZD_CS_NO_ACK			0x02
 
 #define ZD_CS_FRAME_TYPE_MASK		0x0c
 #define ZD_CS_DATA_FRAME		0x00
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index f6732538790..8d88daeed0c 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1212,7 +1212,7 @@ static int __devinit netfront_probe(struct xenbus_device *dev,
 	}
 
 	info = netdev_priv(netdev);
-	dev->dev.driver_data = info;
+	dev_set_drvdata(&dev->dev, info);
 
 	err = register_netdev(info->netdev);
 	if (err) {
@@ -1233,7 +1233,7 @@ static int __devinit netfront_probe(struct xenbus_device *dev,
 
  fail:
 	free_netdev(netdev);
-	dev->dev.driver_data = NULL;
+	dev_set_drvdata(&dev->dev, NULL);
 	return err;
 }
 
@@ -1275,7 +1275,7 @@ static void xennet_disconnect_backend(struct netfront_info *info)
  */
 static int netfront_resume(struct xenbus_device *dev)
 {
-	struct netfront_info *info = dev->dev.driver_data;
+	struct netfront_info *info = dev_get_drvdata(&dev->dev);
 
 	dev_dbg(&dev->dev, "%s\n", dev->nodename);
 
@@ -1600,7 +1600,7 @@ static int xennet_connect(struct net_device *dev)
 static void backend_changed(struct xenbus_device *dev,
 			    enum xenbus_state backend_state)
 {
-	struct netfront_info *np = dev->dev.driver_data;
+	struct netfront_info *np = dev_get_drvdata(&dev->dev);
 	struct net_device *netdev = np->netdev;
 
 	dev_dbg(&dev->dev, "%s\n", xenbus_strstate(backend_state));
@@ -1774,7 +1774,7 @@ static struct xenbus_device_id netfront_ids[] = {
 
 static int __devexit xennet_remove(struct xenbus_device *dev)
 {
-	struct netfront_info *info = dev->dev.driver_data;
+	struct netfront_info *info = dev_get_drvdata(&dev->dev);
 
 	dev_dbg(&dev->dev, "%s\n", dev->nodename);
 
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 7477ffdcddb..3c7a5053f1d 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -717,7 +717,7 @@ static void yellowfin_tx_timeout(struct net_device *dev)
 	if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
 		netif_wake_queue (dev);		/* Typical path */
 
-	dev->trans_start = jiffies;
+	dev->trans_start = jiffies; /* prevent tx timeout */
 	dev->stats.tx_errors++;
 }
 
@@ -876,7 +876,6 @@ static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		netif_start_queue (dev);		/* Typical path */
 	else
 		yp->tx_full = 1;
-	dev->trans_start = jiffies;
 
 	if (yellowfin_debug > 4) {
 		printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 27f3b81333d..d2fa27c5c1b 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -19,3 +19,9 @@ config OF_SPI
 	depends on OF && (PPC_OF || MICROBLAZE) && SPI
 	help
 	  OpenFirmware SPI accessors
+
+config OF_MDIO
+	def_tristate PHYLIB
+	depends on OF && PHYLIB
+	help
+	  OpenFirmware MDIO bus (Ethernet PHY) accessors
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 4c3c6f8e36f..bdfb5f5d4b0 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_OF_DEVICE) += device.o platform.o
 obj-$(CONFIG_OF_GPIO)   += gpio.o
 obj-$(CONFIG_OF_I2C)	+= of_i2c.o
 obj-$(CONFIG_OF_SPI)	+= of_spi.o
+obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 41c5dfd8535..69f85c07d17 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -447,6 +447,7 @@ struct of_modalias_table {
 static struct of_modalias_table of_modalias_table[] = {
 	{ "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
 	{ "mmc-spi-slot", "mmc_spi" },
+	{ "stm,m25p40", "m25p80" },
 };
 
 /**
@@ -495,6 +496,30 @@ int of_modalias_node(struct device_node *node, char *modalias, int len)
 EXPORT_SYMBOL_GPL(of_modalias_node);
 
 /**
+ * of_parse_phandle - Resolve a phandle property to a device_node pointer
+ * @np: Pointer to device node holding phandle property
+ * @phandle_name: Name of property holding a phandle value
+ * @index: For properties holding a table of phandles, this is the index into
+ *         the table
+ *
+ * Returns the device_node pointer with refcount incremented.  Use
+ * of_node_put() on it when done.
+ */
+struct device_node *
+of_parse_phandle(struct device_node *np, const char *phandle_name, int index)
+{
+	const phandle *phandle;
+	int size;
+
+	phandle = of_get_property(np, phandle_name, &size);
+	if ((!phandle) || (size < sizeof(*phandle) * (index + 1)))
+		return NULL;
+
+	return of_find_node_by_phandle(phandle[index]);
+}
+EXPORT_SYMBOL(of_parse_phandle);
+
+/**
  * of_parse_phandles_with_args - Find a node pointed by phandle in a list
  * @np:		pointer to a device tree node containing a list
  * @list_name:	property name that contains a list
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
new file mode 100644
index 00000000000..aee967d7f76
--- /dev/null
+++ b/drivers/of/of_mdio.c
@@ -0,0 +1,139 @@
+/*
+ * OF helpers for the MDIO (Ethernet PHY) API
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the OpenFirmware device tree and using it to populate an mii_bus.
+ */
+
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_LICENSE("GPL");
+
+/**
+ * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
+ * @mdio: pointer to mii_bus structure
+ * @np: pointer to device_node of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @np.
+ */
+int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
+{
+	struct phy_device *phy;
+	struct device_node *child;
+	int rc, i;
+
+	/* Mask out all PHYs from auto probing.  Instead the PHYs listed in
+	 * the device tree are populated after the bus has been registered */
+	mdio->phy_mask = ~0;
+
+	/* Clear all the IRQ properties */
+	if (mdio->irq)
+		for (i=0; i<PHY_MAX_ADDR; i++)
+			mdio->irq[i] = PHY_POLL;
+
+	/* Register the MDIO bus */
+	rc = mdiobus_register(mdio);
+	if (rc)
+		return rc;
+
+	/* Loop over the child nodes and register a phy_device for each one */
+	for_each_child_of_node(np, child) {
+		const u32 *addr;
+		int len;
+
+		/* A PHY must have a reg property in the range [0-31] */
+		addr = of_get_property(child, "reg", &len);
+		if (!addr || len < sizeof(*addr) || *addr >= 32 || *addr < 0) {
+			dev_err(&mdio->dev, "%s has invalid PHY address\n",
+				child->full_name);
+			continue;
+		}
+
+		if (mdio->irq) {
+			mdio->irq[*addr] = irq_of_parse_and_map(child, 0);
+			if (!mdio->irq[*addr])
+				mdio->irq[*addr] = PHY_POLL;
+		}
+
+		phy = get_phy_device(mdio, *addr);
+		if (!phy) {
+			dev_err(&mdio->dev, "error probing PHY at address %i\n",
+				*addr);
+			continue;
+		}
+		phy_scan_fixups(phy);
+
+		/* Associate the OF node with the device structure so it
+		 * can be looked up later */
+		of_node_get(child);
+		dev_archdata_set_node(&phy->dev.archdata, child);
+
+		/* All data is now stored in the phy struct; register it */
+		rc = phy_device_register(phy);
+		if (rc) {
+			phy_device_free(phy);
+			of_node_put(child);
+			continue;
+		}
+
+		dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
+			child->name, *addr);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(of_mdiobus_register);
+
+/**
+ * of_phy_find_device - Give a PHY node, find the phy_device
+ * @phy_np: Pointer to the phy's device tree node
+ *
+ * Returns a pointer to the phy_device.
+ */
+struct phy_device *of_phy_find_device(struct device_node *phy_np)
+{
+	struct device *d;
+	int match(struct device *dev, void *phy_np)
+	{
+		return dev_archdata_get_node(&dev->archdata) == phy_np;
+	}
+
+	if (!phy_np)
+		return NULL;
+
+	d = bus_find_device(&mdio_bus_type, NULL, phy_np, match);
+	return d ? to_phy_device(d) : NULL;
+}
+EXPORT_SYMBOL(of_phy_find_device);
+
+/**
+ * of_phy_connect - Connect to the phy described in the device tree
+ * @dev: pointer to net_device claiming the phy
+ * @phy_np: Pointer to device tree node for the PHY
+ * @hndlr: Link state callback for the network device
+ * @iface: PHY data interface type
+ *
+ * Returns a pointer to the phy_device if successfull.  NULL otherwise
+ */
+struct phy_device *of_phy_connect(struct net_device *dev,
+				  struct device_node *phy_np,
+				  void (*hndlr)(struct net_device *), u32 flags,
+				  phy_interface_t iface)
+{
+	struct phy_device *phy = of_phy_find_device(phy_np);
+
+	if (!phy)
+		return NULL;
+
+	return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect);
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index f415fdd9a88..5b89f404e66 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -373,7 +373,7 @@ static int __init eisa_probe(struct parisc_device *dev)
 	if (result >= 0) {
 		/* FIXME : Don't enumerate the bus twice. */
 		eisa_dev.root.dev = &dev->dev;
-		dev->dev.driver_data = &eisa_dev.root;
+		dev_set_drvdata(&dev->dev, &eisa_dev.root);
 		eisa_dev.root.bus_base_addr = 0;
 		eisa_dev.root.res = &eisa_dev.hba.io_space;
 		eisa_dev.root.slots = result;
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index e5999c4cedc..d46dd57450a 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -2010,7 +2010,7 @@ void __init sba_init(void)
 void * sba_get_iommu(struct parisc_device *pci_hba)
 {
 	struct parisc_device *sba_dev = parisc_parent(pci_hba);
-	struct sba_device *sba = sba_dev->dev.driver_data;
+	struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
 	char t = sba_dev->id.hw_type;
 	int iocnum = (pci_hba->hw_path >> 3);	/* rope # */
 
@@ -2031,7 +2031,7 @@ void * sba_get_iommu(struct parisc_device *pci_hba)
 void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
 {
 	struct parisc_device *sba_dev = parisc_parent(pci_hba);
-	struct sba_device *sba = sba_dev->dev.driver_data;
+	struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
 	char t = sba_dev->id.hw_type;
 	int i;
 	int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */
@@ -2073,7 +2073,7 @@ void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
 void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
 {
 	struct parisc_device *sba_dev = parisc_parent(pci_hba);
-	struct sba_device *sba = sba_dev->dev.driver_data;
+	struct sba_device *sba = dev_get_drvdata(&sba_dev->dev);
 	char t = sba_dev->id.hw_type;
 	int base, size;
 	int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index ea31a452b15..5d6de380e42 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -376,14 +376,14 @@ static int __devinit parport_init_chip(struct parisc_device *dev)
 			/* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL);
 	if (p)
 		parport_count++;
-	dev->dev.driver_data = p;
+	dev_set_drvdata(&dev->dev, p);
 
 	return 0;
 }
 
 static int __devexit parport_remove_chip(struct parisc_device *dev)
 {
-	struct parport *p = dev->dev.driver_data;
+	struct parport *p = dev_get_drvdata(&dev->dev);
 	if (p) {
 		struct parport_gsc_private *priv = p->private_data;
 		struct parport_operations *ops = p->ops;
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ba6af162fd3..b77ae679427 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -39,7 +39,6 @@ obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
 obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PARISC) += setup-bus.o
 obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
-obj-$(CONFIG_PPC32) += setup-irq.o
 obj-$(CONFIG_PPC) += setup-bus.o
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 3eee70928d4..2d6da78fddb 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -679,7 +679,7 @@ alloc_err:
 	return rc;
 }
 
-static int sn_pci_hotplug_init(void)
+static int __init sn_pci_hotplug_init(void)
 {
 	struct pci_bus *pci_bus = NULL;
 	int rc;
@@ -716,7 +716,7 @@ static int sn_pci_hotplug_init(void)
 	return registered == 1 ? 0 : -ENODEV;
 }
 
-static void sn_pci_hotplug_exit(void)
+static void __exit sn_pci_hotplug_exit(void)
 {
 	struct hotplug_slot *bss_hotplug_slot;
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1a91bf9687a..07bbb9b3b93 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -24,6 +24,11 @@
 #include <asm/setup.h>
 #include "pci.h"
 
+const char *pci_power_names[] = {
+	"error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
+};
+EXPORT_SYMBOL_GPL(pci_power_names);
+
 unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
 
 #ifdef CONFIG_PCI_DOMAINS
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index e3998250386..13ffdc35ea0 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -275,7 +275,7 @@ static void pcie_device_init(struct pci_dev *parent, struct pcie_device *dev,
 	memset(device, 0, sizeof(struct device));
 	device->bus = &pcie_port_bus_type;
 	device->driver = NULL;
-	device->driver_data = NULL;
+	dev_set_drvdata(device, NULL);
 	device->release = release_pcie_device;	/* callback to free pcie dev */
 	dev_set_name(device, "%s:pcie%02x",
 		 pci_name(parent), get_descriptor_id(port_type, service_type));
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 3067673d54f..bd4253f93d5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2461,6 +2461,8 @@ static void __devinit quirk_i82576_sriov(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10c9, quirk_i82576_sriov);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e6, quirk_i82576_sriov);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov);
 
 #endif	/* CONFIG_PCI_IOV */
 
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 27647354398..fbf965b31c1 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
 	depends on ARM && ARCH_PXA && PCMCIA
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
-		    || ARCH_VIPER || ARCH_PXA_ESERIES)
+		    || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index bbac4632722..047394d98ac 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -73,5 +73,6 @@ pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
 pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
+pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 47cab31ff6e..304ff6d5cf3 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -394,7 +394,7 @@ static int pcmcia_device_probe(struct device * dev)
 	p_drv = to_pcmcia_drv(dev->driver);
 	s = p_dev->socket;
 
-	/* The PCMCIA code passes the match data in via dev->driver_data
+	/* The PCMCIA code passes the match data in via dev_set_drvdata(dev)
 	 * which is an ugly hack. Once the driver probe is called it may
 	 * and often will overwrite the match data so we must save it first
 	 *
@@ -404,7 +404,7 @@ static int pcmcia_device_probe(struct device * dev)
 	 * call which will then check whether there are two
 	 * pseudo devices, and if not, add the second one.
 	 */
-	did = p_dev->dev.driver_data;
+	did = dev_get_drvdata(&p_dev->dev);
 
 	ds_dev_dbg(1, dev, "trying to bind to %s\n", p_drv->drv.name);
 
@@ -499,7 +499,7 @@ static int pcmcia_device_remove(struct device * dev)
 	 * pseudo multi-function card, we need to unbind
 	 * all devices
 	 */
-	did = p_dev->dev.driver_data;
+	did = dev_get_drvdata(&p_dev->dev);
 	if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
 	    (p_dev->socket->device_count != 0) &&
 	    (p_dev->device_no == 0))
@@ -828,7 +828,6 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
 {
 	struct pcmcia_socket *s = dev->socket;
 	const struct firmware *fw;
-	char path[FIRMWARE_NAME_MAX];
 	int ret = -ENOMEM;
 	int no_funcs;
 	int old_funcs;
@@ -839,16 +838,7 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
 
 	ds_dev_dbg(1, &dev->dev, "trying to load CIS file %s\n", filename);
 
-	if (strlen(filename) > (FIRMWARE_NAME_MAX - 1)) {
-		dev_printk(KERN_WARNING, &dev->dev,
-			   "pcmcia: CIS filename is too long [%s]\n",
-			   filename);
-		return -EINVAL;
-	}
-
-	snprintf(path, sizeof(path), "%s", filename);
-
-	if (request_firmware(&fw, path, &dev->dev) == 0) {
+	if (request_firmware(&fw, filename, &dev->dev) == 0) {
 		if (fw->size >= CISTPL_MAX_CIS_SIZE) {
 			ret = -EINVAL;
 			dev_printk(KERN_ERR, &dev->dev,
@@ -988,7 +978,7 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev,
 			return 0;
 	}
 
-	dev->dev.driver_data = (void *) did;
+	dev_set_drvdata(&dev->dev, did);
 
 	return 1;
 }
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 1703b20cad5..6095f8daecd 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -915,12 +915,9 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 		err = -EPERM;
 		goto free_out;
 	} else {
-		static int printed = 0;
-		if (!printed) {
-			printk(KERN_WARNING "2.6. kernels use pcmciamtd instead of memory_cs.c and do not require special\n");
-			printk(KERN_WARNING "MTD handling any more.\n");
-			printed++;
-		}
+			printk_once(KERN_WARNING
+				"2.6. kernels use pcmciamtd instead of memory_cs.c and do not require special\n");
+			printk_once(KERN_WARNING "MTD handling any more.\n");
 	}
 	err = -EINVAL;
 	goto free_out;
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
new file mode 100644
index 00000000000..490749ea677
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -0,0 +1,174 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_stargate2.c
+ *
+ * Stargate 2 PCMCIA specific routines.
+ *
+ * Created:	December 6, 2005
+ * Author:	Ed C. Epp
+ * Copyright:	Intel Corp 2005
+ *              Jonathan Cameron <jic23@cam.ac.uk> 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define SG2_S0_BUFF_CTL		120
+#define SG2_S0_POWER_CTL	108
+#define SG2_S0_GPIO_RESET	82
+#define SG2_S0_GPIO_DETECT	53
+#define SG2_S0_GPIO_READY	81
+
+static struct pcmcia_irqs irqs[] = {
+	{ 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" },
+};
+
+static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				    struct pcmcia_state *state)
+{
+	state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT);
+	state->ready  = !!gpio_get_value(SG2_S0_GPIO_READY);
+	state->bvd1   = 0; /* not available - battery detect on card */
+	state->bvd2   = 0; /* not available */
+	state->vs_3v  = 1; /* not available - voltage detect for card */
+	state->vs_Xv  = 0; /* not available */
+	state->wrprot = 0; /* not available - write protect */
+}
+
+static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				       const socket_state_t *state)
+{
+	/* Enable card power */
+	switch (state->Vcc) {
+	case 0:
+		/* sets power ctl register high */
+		gpio_set_value(SG2_S0_POWER_CTL, 1);
+		break;
+	case 33:
+	case 50:
+		/* sets power control register low (clear) */
+		gpio_set_value(SG2_S0_POWER_CTL, 0);
+		msleep(100);
+		break;
+	default:
+		pr_err("%s(): bad Vcc %u\n",
+		       __func__, state->Vcc);
+		return -1;
+	}
+
+	/* reset */
+	gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET));
+
+	return 0;
+}
+
+static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static struct pcmcia_low_level sg2_pcmcia_ops __initdata = {
+	.owner			= THIS_MODULE,
+	.hw_init		= sg2_pcmcia_hw_init,
+	.hw_shutdown		= sg2_pcmcia_hw_shutdown,
+	.socket_state		= sg2_pcmcia_socket_state,
+	.configure_socket	= sg2_pcmcia_configure_socket,
+	.socket_init		= sg2_pcmcia_socket_init,
+	.socket_suspend		= sg2_pcmcia_socket_suspend,
+	.nr			= 1,
+};
+
+static struct platform_device *sg2_pcmcia_device;
+
+static int __init sg2_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_stargate2())
+		return -ENODEV;
+
+	sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!sg2_pcmcia_device)
+		return -ENOMEM;
+
+	ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl");
+	if (ret)
+		goto error_put_platform_device;
+	ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl");
+	if (ret)
+		goto error_free_gpio_buff_ctl;
+	ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset");
+	if (ret)
+		goto error_free_gpio_power_ctl;
+	/* Set gpio directions */
+	gpio_direction_output(SG2_S0_BUFF_CTL, 0);
+	gpio_direction_output(SG2_S0_POWER_CTL, 1);
+	gpio_direction_output(SG2_S0_GPIO_RESET, 1);
+
+	ret = platform_device_add_data(sg2_pcmcia_device,
+				       &sg2_pcmcia_ops,
+				       sizeof(sg2_pcmcia_ops));
+	if (ret)
+		goto error_free_gpio_reset;
+
+	ret = platform_device_add(sg2_pcmcia_device);
+	if (ret)
+		goto error_free_gpio_reset;
+
+	return 0;
+error_free_gpio_reset:
+	gpio_free(SG2_S0_GPIO_RESET);
+error_free_gpio_power_ctl:
+	gpio_free(SG2_S0_POWER_CTL);
+error_free_gpio_buff_ctl:
+	gpio_free(SG2_S0_BUFF_CTL);
+error_put_platform_device:
+	platform_device_put(sg2_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit sg2_pcmcia_exit(void)
+{
+	platform_device_unregister(sg2_pcmcia_device);
+	gpio_free(SG2_S0_BUFF_CTL);
+	gpio_free(SG2_S0_POWER_CTL);
+	gpio_free(SG2_S0_GPIO_RESET);
+}
+
+fs_initcall(sg2_pcmcia_init);
+module_exit(sg2_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 284ebaca6e4..c682ac53641 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -21,7 +21,7 @@ config ACER_WMI
 	depends on NEW_LEDS
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on SERIO_I8042
-	depends on RFKILL
+	depends on RFKILL || RFKILL = n
 	select ACPI_WMI
 	---help---
 	  This is a driver for newer Acer (and Wistron) laptops. It adds
@@ -60,7 +60,7 @@ config DELL_LAPTOP
 	depends on DCDBAS
 	depends on EXPERIMENTAL
 	depends on BACKLIGHT_CLASS_DEVICE
-	depends on RFKILL
+	depends on RFKILL || RFKILL = n
 	depends on POWER_SUPPLY
 	default n
 	---help---
@@ -117,7 +117,7 @@ config HP_WMI
 	tristate "HP WMI extras"
 	depends on ACPI_WMI
 	depends on INPUT
-	depends on RFKILL
+	depends on RFKILL || RFKILL = n
 	help
 	 Say Y here if you want to support WMI-based hotkeys on HP laptops and
 	 to read data from WMI such as docking or ambient light sensor state.
@@ -196,14 +196,13 @@ config THINKPAD_ACPI
 	tristate "ThinkPad ACPI Laptop Extras"
 	depends on ACPI
 	depends on INPUT
+	depends on RFKILL || RFKILL = n
 	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
 	select NVRAM
 	select NEW_LEDS
 	select LEDS_CLASS
-	select NET
-	select RFKILL
 	---help---
 	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
 	  support for Fn-Fx key combinations, Bluetooth control, video
@@ -338,9 +337,9 @@ config EEEPC_LAPTOP
 	depends on ACPI
 	depends on INPUT
 	depends on EXPERIMENTAL
+	depends on RFKILL || RFKILL = n
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
-	select RFKILL
 	---help---
 	  This driver supports the Fn-Fx keys on Eee PC laptops.
 	  It also adds the ability to switch camera/wlan on/off.
@@ -405,9 +404,8 @@ config ACPI_TOSHIBA
 	tristate "Toshiba Laptop Extras"
 	depends on ACPI
 	depends on INPUT
+	depends on RFKILL || RFKILL = n
 	select INPUT_POLLDEV
-	select NET
-	select RFKILL
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
 	  This driver adds support for access to certain system settings
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 0f6e43bf4fc..09a503e5da6 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -958,59 +958,47 @@ static void acer_rfkill_update(struct work_struct *ignored)
 
 	status = get_u32(&state, ACER_CAP_WIRELESS);
 	if (ACPI_SUCCESS(status))
-		rfkill_force_state(wireless_rfkill, state ?
-			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED);
+		rfkill_set_sw_state(wireless_rfkill, !!state);
 
 	if (has_cap(ACER_CAP_BLUETOOTH)) {
 		status = get_u32(&state, ACER_CAP_BLUETOOTH);
 		if (ACPI_SUCCESS(status))
-			rfkill_force_state(bluetooth_rfkill, state ?
-				RFKILL_STATE_UNBLOCKED :
-				RFKILL_STATE_SOFT_BLOCKED);
+			rfkill_set_sw_state(bluetooth_rfkill, !!state);
 	}
 
 	schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
 }
 
-static int acer_rfkill_set(void *data, enum rfkill_state state)
+static int acer_rfkill_set(void *data, bool blocked)
 {
 	acpi_status status;
-	u32 *cap = data;
-	status = set_u32((u32) (state == RFKILL_STATE_UNBLOCKED), *cap);
+	u32 cap = (unsigned long)data;
+	status = set_u32(!!blocked, cap);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 	return 0;
 }
 
-static struct rfkill * acer_rfkill_register(struct device *dev,
-enum rfkill_type type, char *name, u32 cap)
+static const struct rfkill_ops acer_rfkill_ops = {
+	.set_block = acer_rfkill_set,
+};
+
+static struct rfkill *acer_rfkill_register(struct device *dev,
+					   enum rfkill_type type,
+					   char *name, u32 cap)
 {
 	int err;
-	u32 state;
-	u32 *data;
 	struct rfkill *rfkill_dev;
 
-	rfkill_dev = rfkill_allocate(dev, type);
+	rfkill_dev = rfkill_alloc(name, dev, type,
+				  &acer_rfkill_ops,
+				  (void *)(unsigned long)cap);
 	if (!rfkill_dev)
 		return ERR_PTR(-ENOMEM);
-	rfkill_dev->name = name;
-	get_u32(&state, cap);
-	rfkill_dev->state = state ? RFKILL_STATE_UNBLOCKED :
-		RFKILL_STATE_SOFT_BLOCKED;
-	data = kzalloc(sizeof(u32), GFP_KERNEL);
-	if (!data) {
-		rfkill_free(rfkill_dev);
-		return ERR_PTR(-ENOMEM);
-	}
-	*data = cap;
-	rfkill_dev->data = data;
-	rfkill_dev->toggle_radio = acer_rfkill_set;
-	rfkill_dev->user_claim_unsupported = 1;
 
 	err = rfkill_register(rfkill_dev);
 	if (err) {
-		kfree(rfkill_dev->data);
-		rfkill_free(rfkill_dev);
+		rfkill_destroy(rfkill_dev);
 		return ERR_PTR(err);
 	}
 	return rfkill_dev;
@@ -1028,8 +1016,8 @@ static int acer_rfkill_init(struct device *dev)
 			RFKILL_TYPE_BLUETOOTH, "acer-bluetooth",
 			ACER_CAP_BLUETOOTH);
 		if (IS_ERR(bluetooth_rfkill)) {
-			kfree(wireless_rfkill->data);
 			rfkill_unregister(wireless_rfkill);
+			rfkill_destroy(wireless_rfkill);
 			return PTR_ERR(bluetooth_rfkill);
 		}
 	}
@@ -1042,11 +1030,13 @@ static int acer_rfkill_init(struct device *dev)
 static void acer_rfkill_exit(void)
 {
 	cancel_delayed_work_sync(&acer_rfkill_work);
-	kfree(wireless_rfkill->data);
+
 	rfkill_unregister(wireless_rfkill);
+	rfkill_destroy(wireless_rfkill);
+
 	if (has_cap(ACER_CAP_BLUETOOTH)) {
-		kfree(bluetooth_rfkill->data);
 		rfkill_unregister(bluetooth_rfkill);
+		rfkill_destroy(bluetooth_rfkill);
 	}
 	return;
 }
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index af9f4302117..2faf0e14f05 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -174,10 +174,11 @@ dell_send_request(struct calling_interface_buffer *buffer, int class,
    result[3]: NVRAM format version number
 */
 
-static int dell_rfkill_set(int radio, enum rfkill_state state)
+static int dell_rfkill_set(void *data, bool blocked)
 {
 	struct calling_interface_buffer buffer;
-	int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1;
+	int disable = blocked ? 0 : 1;
+	unsigned long radio = (unsigned long)data;
 
 	memset(&buffer, 0, sizeof(struct calling_interface_buffer));
 	buffer.input[0] = (1 | (radio<<8) | (disable << 16));
@@ -186,56 +187,24 @@ static int dell_rfkill_set(int radio, enum rfkill_state state)
 	return 0;
 }
 
-static int dell_wifi_set(void *data, enum rfkill_state state)
-{
-	return dell_rfkill_set(1, state);
-}
-
-static int dell_bluetooth_set(void *data, enum rfkill_state state)
-{
-	return dell_rfkill_set(2, state);
-}
-
-static int dell_wwan_set(void *data, enum rfkill_state state)
-{
-	return dell_rfkill_set(3, state);
-}
-
-static int dell_rfkill_get(int bit, enum rfkill_state *state)
+static void dell_rfkill_query(struct rfkill *rfkill, void *data)
 {
 	struct calling_interface_buffer buffer;
 	int status;
-	int new_state = RFKILL_STATE_HARD_BLOCKED;
+	int bit = (unsigned long)data + 16;
 
 	memset(&buffer, 0, sizeof(struct calling_interface_buffer));
 	dell_send_request(&buffer, 17, 11);
 	status = buffer.output[1];
 
-	if (status & (1<<16))
-		new_state = RFKILL_STATE_SOFT_BLOCKED;
-
-	if (status & (1<<bit))
-		*state = new_state;
-	else
-		*state = RFKILL_STATE_UNBLOCKED;
-
-	return 0;
-}
-
-static int dell_wifi_get(void *data, enum rfkill_state *state)
-{
-	return dell_rfkill_get(17, state);
-}
-
-static int dell_bluetooth_get(void *data, enum rfkill_state *state)
-{
-	return dell_rfkill_get(18, state);
+	if (status & BIT(bit))
+		rfkill_set_hw_state(rfkill, !!(status & BIT(16)));
 }
 
-static int dell_wwan_get(void *data, enum rfkill_state *state)
-{
-	return dell_rfkill_get(19, state);
-}
+static const struct rfkill_ops dell_rfkill_ops = {
+	.set_block = dell_rfkill_set,
+	.query = dell_rfkill_query,
+};
 
 static int dell_setup_rfkill(void)
 {
@@ -248,36 +217,37 @@ static int dell_setup_rfkill(void)
 	status = buffer.output[1];
 
 	if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
-		wifi_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WLAN);
-		if (!wifi_rfkill)
+		wifi_rfkill = rfkill_alloc("dell-wifi", NULL, RFKILL_TYPE_WLAN,
+					   &dell_rfkill_ops, (void *) 1);
+		if (!wifi_rfkill) {
+			ret = -ENOMEM;
 			goto err_wifi;
-		wifi_rfkill->name = "dell-wifi";
-		wifi_rfkill->toggle_radio = dell_wifi_set;
-		wifi_rfkill->get_state = dell_wifi_get;
+		}
 		ret = rfkill_register(wifi_rfkill);
 		if (ret)
 			goto err_wifi;
 	}
 
 	if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) {
-		bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH);
-		if (!bluetooth_rfkill)
+		bluetooth_rfkill = rfkill_alloc("dell-bluetooth", NULL,
+						RFKILL_TYPE_BLUETOOTH,
+						&dell_rfkill_ops, (void *) 2);
+		if (!bluetooth_rfkill) {
+			ret = -ENOMEM;
 			goto err_bluetooth;
-		bluetooth_rfkill->name = "dell-bluetooth";
-		bluetooth_rfkill->toggle_radio = dell_bluetooth_set;
-		bluetooth_rfkill->get_state = dell_bluetooth_get;
+		}
 		ret = rfkill_register(bluetooth_rfkill);
 		if (ret)
 			goto err_bluetooth;
 	}
 
 	if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) {
-		wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN);
-		if (!wwan_rfkill)
+		wwan_rfkill = rfkill_alloc("dell-wwan", NULL, RFKILL_TYPE_WWAN,
+					   &dell_rfkill_ops, (void *) 3);
+		if (!wwan_rfkill) {
+			ret = -ENOMEM;
 			goto err_wwan;
-		wwan_rfkill->name = "dell-wwan";
-		wwan_rfkill->toggle_radio = dell_wwan_set;
-		wwan_rfkill->get_state = dell_wwan_get;
+		}
 		ret = rfkill_register(wwan_rfkill);
 		if (ret)
 			goto err_wwan;
@@ -285,22 +255,15 @@ static int dell_setup_rfkill(void)
 
 	return 0;
 err_wwan:
-	if (wwan_rfkill)
-		rfkill_free(wwan_rfkill);
-	if (bluetooth_rfkill) {
+	rfkill_destroy(wwan_rfkill);
+	if (bluetooth_rfkill)
 		rfkill_unregister(bluetooth_rfkill);
-		bluetooth_rfkill = NULL;
-	}
 err_bluetooth:
-	if (bluetooth_rfkill)
-		rfkill_free(bluetooth_rfkill);
-	if (wifi_rfkill) {
+	rfkill_destroy(bluetooth_rfkill);
+	if (wifi_rfkill)
 		rfkill_unregister(wifi_rfkill);
-		wifi_rfkill = NULL;
-	}
 err_wifi:
-	if (wifi_rfkill)
-		rfkill_free(wifi_rfkill);
+	rfkill_destroy(wifi_rfkill);
 
 	return ret;
 }
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 353a898c369..03bf522bd7a 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -299,39 +299,22 @@ static int update_bl_status(struct backlight_device *bd)
  * Rfkill helpers
  */
 
-static int eeepc_wlan_rfkill_set(void *data, enum rfkill_state state)
-{
-	if (state == RFKILL_STATE_SOFT_BLOCKED)
-		return set_acpi(CM_ASL_WLAN, 0);
-	else
-		return set_acpi(CM_ASL_WLAN, 1);
-}
-
-static int eeepc_wlan_rfkill_state(void *data, enum rfkill_state *state)
+static bool eeepc_wlan_rfkill_blocked(void)
 {
 	if (get_acpi(CM_ASL_WLAN) == 1)
-		*state = RFKILL_STATE_UNBLOCKED;
-	else
-		*state = RFKILL_STATE_SOFT_BLOCKED;
-	return 0;
+		return false;
+	return true;
 }
 
-static int eeepc_bluetooth_rfkill_set(void *data, enum rfkill_state state)
+static int eeepc_rfkill_set(void *data, bool blocked)
 {
-	if (state == RFKILL_STATE_SOFT_BLOCKED)
-		return set_acpi(CM_ASL_BLUETOOTH, 0);
-	else
-		return set_acpi(CM_ASL_BLUETOOTH, 1);
+	unsigned long asl = (unsigned long)data;
+	return set_acpi(asl, !blocked);
 }
 
-static int eeepc_bluetooth_rfkill_state(void *data, enum rfkill_state *state)
-{
-	if (get_acpi(CM_ASL_BLUETOOTH) == 1)
-		*state = RFKILL_STATE_UNBLOCKED;
-	else
-		*state = RFKILL_STATE_SOFT_BLOCKED;
-	return 0;
-}
+static const struct rfkill_ops eeepc_rfkill_ops = {
+	.set_block = eeepc_rfkill_set,
+};
 
 /*
  * Sys helpers
@@ -531,9 +514,9 @@ static int notify_brn(void)
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 {
-	enum rfkill_state state;
 	struct pci_dev *dev;
 	struct pci_bus *bus = pci_find_bus(0, 1);
+	bool blocked;
 
 	if (event != ACPI_NOTIFY_BUS_CHECK)
 		return;
@@ -543,9 +526,8 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 		return;
 	}
 
-	eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state);
-
-	if (state == RFKILL_STATE_UNBLOCKED) {
+	blocked = eeepc_wlan_rfkill_blocked();
+	if (!blocked) {
 		dev = pci_get_slot(bus, 0);
 		if (dev) {
 			/* Device already present */
@@ -566,7 +548,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 		}
 	}
 
-	rfkill_force_state(ehotk->eeepc_wlan_rfkill, state);
+	rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
 }
 
 static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
@@ -684,26 +666,17 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
 
 	if (get_acpi(CM_ASL_WLAN) != -1) {
-		ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev,
-							   RFKILL_TYPE_WLAN);
+		ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan",
+							&device->dev,
+							RFKILL_TYPE_WLAN,
+							&eeepc_rfkill_ops,
+							(void *)CM_ASL_WLAN);
 
 		if (!ehotk->eeepc_wlan_rfkill)
 			goto wlan_fail;
 
-		ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan";
-		ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set;
-		ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state;
-		if (get_acpi(CM_ASL_WLAN) == 1) {
-			ehotk->eeepc_wlan_rfkill->state =
-				RFKILL_STATE_UNBLOCKED;
-			rfkill_set_default(RFKILL_TYPE_WLAN,
-					   RFKILL_STATE_UNBLOCKED);
-		} else {
-			ehotk->eeepc_wlan_rfkill->state =
-				RFKILL_STATE_SOFT_BLOCKED;
-			rfkill_set_default(RFKILL_TYPE_WLAN,
-					   RFKILL_STATE_SOFT_BLOCKED);
-		}
+		rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
+				    get_acpi(CM_ASL_WLAN) != 1);
 		result = rfkill_register(ehotk->eeepc_wlan_rfkill);
 		if (result)
 			goto wlan_fail;
@@ -711,28 +684,17 @@ static int eeepc_hotk_add(struct acpi_device *device)
 
 	if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
 		ehotk->eeepc_bluetooth_rfkill =
-			rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH);
+			rfkill_alloc("eeepc-bluetooth",
+				     &device->dev,
+				     RFKILL_TYPE_BLUETOOTH,
+				     &eeepc_rfkill_ops,
+				     (void *)CM_ASL_BLUETOOTH);
 
 		if (!ehotk->eeepc_bluetooth_rfkill)
 			goto bluetooth_fail;
 
-		ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth";
-		ehotk->eeepc_bluetooth_rfkill->toggle_radio =
-			eeepc_bluetooth_rfkill_set;
-		ehotk->eeepc_bluetooth_rfkill->get_state =
-			eeepc_bluetooth_rfkill_state;
-		if (get_acpi(CM_ASL_BLUETOOTH) == 1) {
-			ehotk->eeepc_bluetooth_rfkill->state =
-				RFKILL_STATE_UNBLOCKED;
-			rfkill_set_default(RFKILL_TYPE_BLUETOOTH,
-					   RFKILL_STATE_UNBLOCKED);
-		} else {
-			ehotk->eeepc_bluetooth_rfkill->state =
-				RFKILL_STATE_SOFT_BLOCKED;
-			rfkill_set_default(RFKILL_TYPE_BLUETOOTH,
-					   RFKILL_STATE_SOFT_BLOCKED);
-		}
-
+		rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+				    get_acpi(CM_ASL_BLUETOOTH) != 1);
 		result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
 		if (result)
 			goto bluetooth_fail;
@@ -741,13 +703,10 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	return 0;
 
  bluetooth_fail:
-	if (ehotk->eeepc_bluetooth_rfkill)
-		rfkill_free(ehotk->eeepc_bluetooth_rfkill);
+	rfkill_destroy(ehotk->eeepc_bluetooth_rfkill);
 	rfkill_unregister(ehotk->eeepc_wlan_rfkill);
-	ehotk->eeepc_wlan_rfkill = NULL;
  wlan_fail:
-	if (ehotk->eeepc_wlan_rfkill)
-		rfkill_free(ehotk->eeepc_wlan_rfkill);
+	rfkill_destroy(ehotk->eeepc_wlan_rfkill);
 	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
 	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
  ehotk_fail:
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 50d9019de2b..16fffe44e33 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -154,58 +154,46 @@ static int hp_wmi_dock_state(void)
 	return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
 }
 
-static int hp_wmi_wifi_set(void *data, enum rfkill_state state)
+static int hp_wmi_set_block(void *data, bool blocked)
 {
-	if (state)
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x101);
-	else
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x100);
-}
+	unsigned long b = (unsigned long) data;
+	int query = BIT(b + 8) | ((!!blocked) << b);
 
-static int hp_wmi_bluetooth_set(void *data, enum rfkill_state state)
-{
-	if (state)
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x202);
-	else
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x200);
+	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
 }
 
-static int hp_wmi_wwan_set(void *data, enum rfkill_state state)
-{
-	if (state)
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x404);
-	else
-		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x400);
-}
+static const struct rfkill_ops hp_wmi_rfkill_ops = {
+	.set_block = hp_wmi_set_block,
+};
 
-static int hp_wmi_wifi_state(void)
+static bool hp_wmi_wifi_state(void)
 {
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x100)
-		return RFKILL_STATE_UNBLOCKED;
+		return false;
 	else
-		return RFKILL_STATE_SOFT_BLOCKED;
+		return true;
 }
 
-static int hp_wmi_bluetooth_state(void)
+static bool hp_wmi_bluetooth_state(void)
 {
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x10000)
-		return RFKILL_STATE_UNBLOCKED;
+		return false;
 	else
-		return RFKILL_STATE_SOFT_BLOCKED;
+		return true;
 }
 
-static int hp_wmi_wwan_state(void)
+static bool hp_wmi_wwan_state(void)
 {
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x1000000)
-		return RFKILL_STATE_UNBLOCKED;
+		return false;
 	else
-		return RFKILL_STATE_SOFT_BLOCKED;
+		return true;
 }
 
 static ssize_t show_display(struct device *dev, struct device_attribute *attr,
@@ -347,14 +335,14 @@ static void hp_wmi_notify(u32 value, void *context)
 			}
 		} else if (eventcode == 0x5) {
 			if (wifi_rfkill)
-				rfkill_force_state(wifi_rfkill,
-						   hp_wmi_wifi_state());
+				rfkill_set_sw_state(wifi_rfkill,
+						    hp_wmi_wifi_state());
 			if (bluetooth_rfkill)
-				rfkill_force_state(bluetooth_rfkill,
-						   hp_wmi_bluetooth_state());
+				rfkill_set_sw_state(bluetooth_rfkill,
+						    hp_wmi_bluetooth_state());
 			if (wwan_rfkill)
-				rfkill_force_state(wwan_rfkill,
-						   hp_wmi_wwan_state());
+				rfkill_set_sw_state(wwan_rfkill,
+						    hp_wmi_wwan_state());
 		} else
 			printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
 			       eventcode);
@@ -430,34 +418,30 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 		goto add_sysfs_error;
 
 	if (wireless & 0x1) {
-		wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
-		wifi_rfkill->name = "hp-wifi";
-		wifi_rfkill->state = hp_wmi_wifi_state();
-		wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
-		wifi_rfkill->user_claim_unsupported = 1;
+		wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
+					   RFKILL_TYPE_WLAN,
+					   &hp_wmi_rfkill_ops,
+					   (void *) 0);
 		err = rfkill_register(wifi_rfkill);
 		if (err)
-			goto add_sysfs_error;
+			goto register_wifi_error;
 	}
 
 	if (wireless & 0x2) {
-		bluetooth_rfkill = rfkill_allocate(&device->dev,
-						   RFKILL_TYPE_BLUETOOTH);
-		bluetooth_rfkill->name = "hp-bluetooth";
-		bluetooth_rfkill->state = hp_wmi_bluetooth_state();
-		bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
-		bluetooth_rfkill->user_claim_unsupported = 1;
+		bluetooth_rfkill = rfkill_alloc("hp-bluetooth", &device->dev,
+						RFKILL_TYPE_BLUETOOTH,
+						&hp_wmi_rfkill_ops,
+						(void *) 1);
 		err = rfkill_register(bluetooth_rfkill);
 		if (err)
 			goto register_bluetooth_error;
 	}
 
 	if (wireless & 0x4) {
-		wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
-		wwan_rfkill->name = "hp-wwan";
-		wwan_rfkill->state = hp_wmi_wwan_state();
-		wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
-		wwan_rfkill->user_claim_unsupported = 1;
+		wwan_rfkill = rfkill_alloc("hp-wwan", &device->dev,
+					   RFKILL_TYPE_WWAN,
+					   &hp_wmi_rfkill_ops,
+					   (void *) 2);
 		err = rfkill_register(wwan_rfkill);
 		if (err)
 			goto register_wwan_err;
@@ -465,11 +449,15 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 
 	return 0;
 register_wwan_err:
+	rfkill_destroy(wwan_rfkill);
 	if (bluetooth_rfkill)
 		rfkill_unregister(bluetooth_rfkill);
 register_bluetooth_error:
+	rfkill_destroy(bluetooth_rfkill);
 	if (wifi_rfkill)
 		rfkill_unregister(wifi_rfkill);
+register_wifi_error:
+	rfkill_destroy(wifi_rfkill);
 add_sysfs_error:
 	cleanup_sysfs(device);
 	return err;
@@ -479,12 +467,18 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
 {
 	cleanup_sysfs(device);
 
-	if (wifi_rfkill)
+	if (wifi_rfkill) {
 		rfkill_unregister(wifi_rfkill);
-	if (bluetooth_rfkill)
+		rfkill_destroy(wifi_rfkill);
+	}
+	if (bluetooth_rfkill) {
 		rfkill_unregister(bluetooth_rfkill);
-	if (wwan_rfkill)
+		rfkill_destroy(wifi_rfkill);
+	}
+	if (wwan_rfkill) {
 		rfkill_unregister(wwan_rfkill);
+		rfkill_destroy(wwan_rfkill);
+	}
 
 	return 0;
 }
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 552958545f9..e48d9a4506f 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -128,11 +128,11 @@ enum sony_nc_rfkill {
 	SONY_BLUETOOTH,
 	SONY_WWAN,
 	SONY_WIMAX,
-	SONY_RFKILL_MAX,
+	N_SONY_RFKILL,
 };
 
-static struct rfkill *sony_rfkill_devices[SONY_RFKILL_MAX];
-static int sony_rfkill_address[SONY_RFKILL_MAX] = {0x300, 0x500, 0x700, 0x900};
+static struct rfkill *sony_rfkill_devices[N_SONY_RFKILL];
+static int sony_rfkill_address[N_SONY_RFKILL] = {0x300, 0x500, 0x700, 0x900};
 static void sony_nc_rfkill_update(void);
 
 /*********** Input Devices ***********/
@@ -1051,151 +1051,96 @@ static void sony_nc_rfkill_cleanup(void)
 {
 	int i;
 
-	for (i = 0; i < SONY_RFKILL_MAX; i++) {
-		if (sony_rfkill_devices[i])
+	for (i = 0; i < N_SONY_RFKILL; i++) {
+		if (sony_rfkill_devices[i]) {
 			rfkill_unregister(sony_rfkill_devices[i]);
+			rfkill_destroy(sony_rfkill_devices[i]);
+		}
 	}
 }
 
-static int sony_nc_rfkill_get(void *data, enum rfkill_state *state)
-{
-	int result;
-	int argument = sony_rfkill_address[(long) data];
-
-	sony_call_snc_handle(0x124, 0x200, &result);
-	if (result & 0x1) {
-		sony_call_snc_handle(0x124, argument, &result);
-		if (result & 0xf)
-			*state = RFKILL_STATE_UNBLOCKED;
-		else
-			*state = RFKILL_STATE_SOFT_BLOCKED;
-	} else {
-		*state = RFKILL_STATE_HARD_BLOCKED;
-	}
-
-	return 0;
-}
-
-static int sony_nc_rfkill_set(void *data, enum rfkill_state state)
+static int sony_nc_rfkill_set(void *data, bool blocked)
 {
 	int result;
 	int argument = sony_rfkill_address[(long) data] + 0x100;
 
-	if (state == RFKILL_STATE_UNBLOCKED)
+	if (!blocked)
 		argument |= 0xff0000;
 
 	return sony_call_snc_handle(0x124, argument, &result);
 }
 
-static int sony_nc_setup_wifi_rfkill(struct acpi_device *device)
-{
-	int err = 0;
-	struct rfkill *sony_wifi_rfkill;
-
-	sony_wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
-	if (!sony_wifi_rfkill)
-		return -1;
-	sony_wifi_rfkill->name = "sony-wifi";
-	sony_wifi_rfkill->toggle_radio = sony_nc_rfkill_set;
-	sony_wifi_rfkill->get_state = sony_nc_rfkill_get;
-	sony_wifi_rfkill->user_claim_unsupported = 1;
-	sony_wifi_rfkill->data = (void *)SONY_WIFI;
-	err = rfkill_register(sony_wifi_rfkill);
-	if (err)
-		rfkill_free(sony_wifi_rfkill);
-	else {
-		sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill;
-		sony_nc_rfkill_set(sony_wifi_rfkill->data,
-				RFKILL_STATE_UNBLOCKED);
-	}
-	return err;
-}
+static const struct rfkill_ops sony_rfkill_ops = {
+	.set_block = sony_nc_rfkill_set,
+};
 
-static int sony_nc_setup_bluetooth_rfkill(struct acpi_device *device)
+static int sony_nc_setup_rfkill(struct acpi_device *device,
+				enum sony_nc_rfkill nc_type)
 {
 	int err = 0;
-	struct rfkill *sony_bluetooth_rfkill;
-
-	sony_bluetooth_rfkill = rfkill_allocate(&device->dev,
-						RFKILL_TYPE_BLUETOOTH);
-	if (!sony_bluetooth_rfkill)
-		return -1;
-	sony_bluetooth_rfkill->name = "sony-bluetooth";
-	sony_bluetooth_rfkill->toggle_radio = sony_nc_rfkill_set;
-	sony_bluetooth_rfkill->get_state = sony_nc_rfkill_get;
-	sony_bluetooth_rfkill->user_claim_unsupported = 1;
-	sony_bluetooth_rfkill->data = (void *)SONY_BLUETOOTH;
-	err = rfkill_register(sony_bluetooth_rfkill);
-	if (err)
-		rfkill_free(sony_bluetooth_rfkill);
-	else {
-		sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill;
-		sony_nc_rfkill_set(sony_bluetooth_rfkill->data,
-				RFKILL_STATE_UNBLOCKED);
+	struct rfkill *rfk;
+	enum rfkill_type type;
+	const char *name;
+
+	switch (nc_type) {
+	case SONY_WIFI:
+		type = RFKILL_TYPE_WLAN;
+		name = "sony-wifi";
+		break;
+	case SONY_BLUETOOTH:
+		type = RFKILL_TYPE_BLUETOOTH;
+		name = "sony-bluetooth";
+		break;
+	case SONY_WWAN:
+		type = RFKILL_TYPE_WWAN;
+		name = "sony-wwan";
+		break;
+	case SONY_WIMAX:
+		type = RFKILL_TYPE_WIMAX;
+		name = "sony-wimax";
+		break;
+	default:
+		return -EINVAL;
 	}
-	return err;
-}
 
-static int sony_nc_setup_wwan_rfkill(struct acpi_device *device)
-{
-	int err = 0;
-	struct rfkill *sony_wwan_rfkill;
+	rfk = rfkill_alloc(name, &device->dev, type,
+			   &sony_rfkill_ops, (void *)nc_type);
+	if (!rfk)
+		return -ENOMEM;
 
-	sony_wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
-	if (!sony_wwan_rfkill)
-		return -1;
-	sony_wwan_rfkill->name = "sony-wwan";
-	sony_wwan_rfkill->toggle_radio = sony_nc_rfkill_set;
-	sony_wwan_rfkill->get_state = sony_nc_rfkill_get;
-	sony_wwan_rfkill->user_claim_unsupported = 1;
-	sony_wwan_rfkill->data = (void *)SONY_WWAN;
-	err = rfkill_register(sony_wwan_rfkill);
-	if (err)
-		rfkill_free(sony_wwan_rfkill);
-	else {
-		sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill;
-		sony_nc_rfkill_set(sony_wwan_rfkill->data,
-				RFKILL_STATE_UNBLOCKED);
+	err = rfkill_register(rfk);
+	if (err) {
+		rfkill_destroy(rfk);
+		return err;
 	}
+	sony_rfkill_devices[nc_type] = rfk;
 	return err;
 }
 
-static int sony_nc_setup_wimax_rfkill(struct acpi_device *device)
+static void sony_nc_rfkill_update()
 {
-	int err = 0;
-	struct rfkill *sony_wimax_rfkill;
+	enum sony_nc_rfkill i;
+	int result;
+	bool hwblock;
 
-	sony_wimax_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX);
-	if (!sony_wimax_rfkill)
-		return -1;
-	sony_wimax_rfkill->name = "sony-wimax";
-	sony_wimax_rfkill->toggle_radio = sony_nc_rfkill_set;
-	sony_wimax_rfkill->get_state = sony_nc_rfkill_get;
-	sony_wimax_rfkill->user_claim_unsupported = 1;
-	sony_wimax_rfkill->data = (void *)SONY_WIMAX;
-	err = rfkill_register(sony_wimax_rfkill);
-	if (err)
-		rfkill_free(sony_wimax_rfkill);
-	else {
-		sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill;
-		sony_nc_rfkill_set(sony_wimax_rfkill->data,
-				RFKILL_STATE_UNBLOCKED);
-	}
-	return err;
-}
+	sony_call_snc_handle(0x124, 0x200, &result);
+	hwblock = !(result & 0x1);
 
-static void sony_nc_rfkill_update()
-{
-	int i;
-	enum rfkill_state state;
+	for (i = 0; i < N_SONY_RFKILL; i++) {
+		int argument = sony_rfkill_address[i];
 
-	for (i = 0; i < SONY_RFKILL_MAX; i++) {
-		if (sony_rfkill_devices[i]) {
-			sony_rfkill_devices[i]->
-				get_state(sony_rfkill_devices[i]->data,
-					  &state);
-			rfkill_force_state(sony_rfkill_devices[i], state);
+		if (!sony_rfkill_devices[i])
+			continue;
+
+		if (hwblock) {
+			if (rfkill_set_hw_state(sony_rfkill_devices[i], true))
+				sony_nc_rfkill_set((void *)i, true);
+			continue;
 		}
+
+		sony_call_snc_handle(0x124, argument, &result);
+		rfkill_set_states(sony_rfkill_devices[i],
+				  !(result & 0xf), false);
 	}
 }
 
@@ -1214,13 +1159,13 @@ static int sony_nc_rfkill_setup(struct acpi_device *device)
 	}
 
 	if (result & 0x1)
-		sony_nc_setup_wifi_rfkill(device);
+		sony_nc_setup_rfkill(device, SONY_WIFI);
 	if (result & 0x2)
-		sony_nc_setup_bluetooth_rfkill(device);
+		sony_nc_setup_rfkill(device, SONY_BLUETOOTH);
 	if (result & 0x1c)
-		sony_nc_setup_wwan_rfkill(device);
+		sony_nc_setup_rfkill(device, SONY_WWAN);
 	if (result & 0x20)
-		sony_nc_setup_wimax_rfkill(device);
+		sony_nc_setup_rfkill(device, SONY_WIMAX);
 
 	return 0;
 }
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 912be65b626..86e958539f4 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -166,13 +166,6 @@ enum {
 
 #define TPACPI_MAX_ACPI_ARGS 3
 
-/* rfkill switches */
-enum {
-	TPACPI_RFK_BLUETOOTH_SW_ID = 0,
-	TPACPI_RFK_WWAN_SW_ID,
-	TPACPI_RFK_UWB_SW_ID,
-};
-
 /* printk headers */
 #define TPACPI_LOG TPACPI_FILE ": "
 #define TPACPI_EMERG	KERN_EMERG	TPACPI_LOG
@@ -1005,67 +998,234 @@ static int __init tpacpi_check_std_acpi_brightness_support(void)
 	return 0;
 }
 
-static int __init tpacpi_new_rfkill(const unsigned int id,
-			struct rfkill **rfk,
+static void printk_deprecated_attribute(const char * const what,
+					const char * const details)
+{
+	tpacpi_log_usertask("deprecated sysfs attribute");
+	printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and "
+		"will be removed. %s\n",
+		what, details);
+}
+
+/*************************************************************************
+ * rfkill and radio control support helpers
+ */
+
+/*
+ * ThinkPad-ACPI firmware handling model:
+ *
+ * WLSW (master wireless switch) is event-driven, and is common to all
+ * firmware-controlled radios.  It cannot be controlled, just monitored,
+ * as expected.  It overrides all radio state in firmware
+ *
+ * The kernel, a masked-off hotkey, and WLSW can change the radio state
+ * (TODO: verify how WLSW interacts with the returned radio state).
+ *
+ * The only time there are shadow radio state changes, is when
+ * masked-off hotkeys are used.
+ */
+
+/*
+ * Internal driver API for radio state:
+ *
+ * int: < 0 = error, otherwise enum tpacpi_rfkill_state
+ * bool: true means radio blocked (off)
+ */
+enum tpacpi_rfkill_state {
+	TPACPI_RFK_RADIO_OFF = 0,
+	TPACPI_RFK_RADIO_ON
+};
+
+/* rfkill switches */
+enum tpacpi_rfk_id {
+	TPACPI_RFK_BLUETOOTH_SW_ID = 0,
+	TPACPI_RFK_WWAN_SW_ID,
+	TPACPI_RFK_UWB_SW_ID,
+	TPACPI_RFK_SW_MAX
+};
+
+static const char *tpacpi_rfkill_names[] = {
+	[TPACPI_RFK_BLUETOOTH_SW_ID] = "bluetooth",
+	[TPACPI_RFK_WWAN_SW_ID] = "wwan",
+	[TPACPI_RFK_UWB_SW_ID] = "uwb",
+	[TPACPI_RFK_SW_MAX] = NULL
+};
+
+/* ThinkPad-ACPI rfkill subdriver */
+struct tpacpi_rfk {
+	struct rfkill *rfkill;
+	enum tpacpi_rfk_id id;
+	const struct tpacpi_rfk_ops *ops;
+};
+
+struct tpacpi_rfk_ops {
+	/* firmware interface */
+	int (*get_status)(void);
+	int (*set_status)(const enum tpacpi_rfkill_state);
+};
+
+static struct tpacpi_rfk *tpacpi_rfkill_switches[TPACPI_RFK_SW_MAX];
+
+/* Query FW and update rfkill sw state for a given rfkill switch */
+static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk)
+{
+	int status;
+
+	if (!tp_rfk)
+		return -ENODEV;
+
+	status = (tp_rfk->ops->get_status)();
+	if (status < 0)
+		return status;
+
+	rfkill_set_sw_state(tp_rfk->rfkill,
+			    (status == TPACPI_RFK_RADIO_OFF));
+
+	return status;
+}
+
+/* Query FW and update rfkill sw state for all rfkill switches */
+static void tpacpi_rfk_update_swstate_all(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < TPACPI_RFK_SW_MAX; i++)
+		tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
+}
+
+/*
+ * Sync the HW-blocking state of all rfkill switches,
+ * do notice it causes the rfkill core to schedule uevents
+ */
+static void tpacpi_rfk_update_hwblock_state(bool blocked)
+{
+	unsigned int i;
+	struct tpacpi_rfk *tp_rfk;
+
+	for (i = 0; i < TPACPI_RFK_SW_MAX; i++) {
+		tp_rfk = tpacpi_rfkill_switches[i];
+		if (tp_rfk) {
+			if (rfkill_set_hw_state(tp_rfk->rfkill,
+						blocked)) {
+				/* ignore -- we track sw block */
+			}
+		}
+	}
+}
+
+/* Call to get the WLSW state from the firmware */
+static int hotkey_get_wlsw(void);
+
+/* Call to query WLSW state and update all rfkill switches */
+static bool tpacpi_rfk_check_hwblock_state(void)
+{
+	int res = hotkey_get_wlsw();
+	int hw_blocked;
+
+	/* When unknown or unsupported, we have to assume it is unblocked */
+	if (res < 0)
+		return false;
+
+	hw_blocked = (res == TPACPI_RFK_RADIO_OFF);
+	tpacpi_rfk_update_hwblock_state(hw_blocked);
+
+	return hw_blocked;
+}
+
+static int tpacpi_rfk_hook_set_block(void *data, bool blocked)
+{
+	struct tpacpi_rfk *tp_rfk = data;
+	int res;
+
+	dbg_printk(TPACPI_DBG_RFKILL,
+		   "request to change radio state to %s\n",
+		   blocked ? "blocked" : "unblocked");
+
+	/* try to set radio state */
+	res = (tp_rfk->ops->set_status)(blocked ?
+				TPACPI_RFK_RADIO_OFF : TPACPI_RFK_RADIO_ON);
+
+	/* and update the rfkill core with whatever the FW really did */
+	tpacpi_rfk_update_swstate(tp_rfk);
+
+	return (res < 0) ? res : 0;
+}
+
+static const struct rfkill_ops tpacpi_rfk_rfkill_ops = {
+	.set_block = tpacpi_rfk_hook_set_block,
+};
+
+static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
+			const struct tpacpi_rfk_ops *tp_rfkops,
 			const enum rfkill_type rfktype,
 			const char *name,
-			const bool set_default,
-			int (*toggle_radio)(void *, enum rfkill_state),
-			int (*get_state)(void *, enum rfkill_state *))
+			const bool set_default)
 {
+	struct tpacpi_rfk *atp_rfk;
 	int res;
-	enum rfkill_state initial_state = RFKILL_STATE_SOFT_BLOCKED;
-
-	res = get_state(NULL, &initial_state);
-	if (res < 0) {
-		printk(TPACPI_ERR
-			"failed to read initial state for %s, error %d; "
-			"will turn radio off\n", name, res);
-	} else if (set_default) {
-		/* try to set the initial state as the default for the rfkill
-		 * type, since we ask the firmware to preserve it across S5 in
-		 * NVRAM */
-		if (rfkill_set_default(rfktype,
-				(initial_state == RFKILL_STATE_UNBLOCKED) ?
-					RFKILL_STATE_UNBLOCKED :
-					RFKILL_STATE_SOFT_BLOCKED) == -EPERM)
-			vdbg_printk(TPACPI_DBG_RFKILL,
-				    "Default state for %s cannot be changed\n",
-				    name);
-	}
-
-	*rfk = rfkill_allocate(&tpacpi_pdev->dev, rfktype);
-	if (!*rfk) {
+	bool initial_sw_state = false;
+	int initial_sw_status;
+
+	BUG_ON(id >= TPACPI_RFK_SW_MAX || tpacpi_rfkill_switches[id]);
+
+	atp_rfk = kzalloc(sizeof(struct tpacpi_rfk), GFP_KERNEL);
+	if (atp_rfk)
+		atp_rfk->rfkill = rfkill_alloc(name,
+						&tpacpi_pdev->dev,
+						rfktype,
+						&tpacpi_rfk_rfkill_ops,
+						atp_rfk);
+	if (!atp_rfk || !atp_rfk->rfkill) {
 		printk(TPACPI_ERR
 			"failed to allocate memory for rfkill class\n");
+		kfree(atp_rfk);
 		return -ENOMEM;
 	}
 
-	(*rfk)->name = name;
-	(*rfk)->get_state = get_state;
-	(*rfk)->toggle_radio = toggle_radio;
-	(*rfk)->state = initial_state;
+	atp_rfk->id = id;
+	atp_rfk->ops = tp_rfkops;
+
+	initial_sw_status = (tp_rfkops->get_status)();
+	if (initial_sw_status < 0) {
+		printk(TPACPI_ERR
+			"failed to read initial state for %s, error %d\n",
+			name, initial_sw_status);
+	} else {
+		initial_sw_state = (initial_sw_status == TPACPI_RFK_RADIO_OFF);
+		if (set_default) {
+			/* try to keep the initial state, since we ask the
+			 * firmware to preserve it across S5 in NVRAM */
+			rfkill_set_sw_state(atp_rfk->rfkill, initial_sw_state);
+		}
+	}
+	rfkill_set_hw_state(atp_rfk->rfkill, tpacpi_rfk_check_hwblock_state());
 
-	res = rfkill_register(*rfk);
+	res = rfkill_register(atp_rfk->rfkill);
 	if (res < 0) {
 		printk(TPACPI_ERR
 			"failed to register %s rfkill switch: %d\n",
 			name, res);
-		rfkill_free(*rfk);
-		*rfk = NULL;
+		rfkill_destroy(atp_rfk->rfkill);
+		kfree(atp_rfk);
 		return res;
 	}
 
+	tpacpi_rfkill_switches[id] = atp_rfk;
 	return 0;
 }
 
-static void printk_deprecated_attribute(const char * const what,
-					const char * const details)
+static void tpacpi_destroy_rfkill(const enum tpacpi_rfk_id id)
 {
-	tpacpi_log_usertask("deprecated sysfs attribute");
-	printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and "
-		"will be removed. %s\n",
-		what, details);
+	struct tpacpi_rfk *tp_rfk;
+
+	BUG_ON(id >= TPACPI_RFK_SW_MAX);
+
+	tp_rfk = tpacpi_rfkill_switches[id];
+	if (tp_rfk) {
+		rfkill_unregister(tp_rfk->rfkill);
+		tpacpi_rfkill_switches[id] = NULL;
+		kfree(tp_rfk);
+	}
 }
 
 static void printk_deprecated_rfkill_attribute(const char * const what)
@@ -1074,6 +1234,112 @@ static void printk_deprecated_rfkill_attribute(const char * const what)
 			"Please switch to generic rfkill before year 2010");
 }
 
+/* sysfs <radio> enable ------------------------------------------------ */
+static ssize_t tpacpi_rfk_sysfs_enable_show(const enum tpacpi_rfk_id id,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	int status;
+
+	printk_deprecated_rfkill_attribute(attr->attr.name);
+
+	/* This is in the ABI... */
+	if (tpacpi_rfk_check_hwblock_state()) {
+		status = TPACPI_RFK_RADIO_OFF;
+	} else {
+		status = tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]);
+		if (status < 0)
+			return status;
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			(status == TPACPI_RFK_RADIO_ON) ? 1 : 0);
+}
+
+static ssize_t tpacpi_rfk_sysfs_enable_store(const enum tpacpi_rfk_id id,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned long t;
+	int res;
+
+	printk_deprecated_rfkill_attribute(attr->attr.name);
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	tpacpi_disclose_usertask(attr->attr.name, "set to %ld\n", t);
+
+	/* This is in the ABI... */
+	if (tpacpi_rfk_check_hwblock_state() && !!t)
+		return -EPERM;
+
+	res = tpacpi_rfkill_switches[id]->ops->set_status((!!t) ?
+				TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF);
+	tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]);
+
+	return (res < 0) ? res : count;
+}
+
+/* procfs -------------------------------------------------------------- */
+static int tpacpi_rfk_procfs_read(const enum tpacpi_rfk_id id, char *p)
+{
+	int len = 0;
+
+	if (id >= TPACPI_RFK_SW_MAX)
+		len += sprintf(p + len, "status:\t\tnot supported\n");
+	else {
+		int status;
+
+		/* This is in the ABI... */
+		if (tpacpi_rfk_check_hwblock_state()) {
+			status = TPACPI_RFK_RADIO_OFF;
+		} else {
+			status = tpacpi_rfk_update_swstate(
+						tpacpi_rfkill_switches[id]);
+			if (status < 0)
+				return status;
+		}
+
+		len += sprintf(p + len, "status:\t\t%s\n",
+				(status == TPACPI_RFK_RADIO_ON) ?
+					"enabled" : "disabled");
+		len += sprintf(p + len, "commands:\tenable, disable\n");
+	}
+
+	return len;
+}
+
+static int tpacpi_rfk_procfs_write(const enum tpacpi_rfk_id id, char *buf)
+{
+	char *cmd;
+	int status = -1;
+	int res = 0;
+
+	if (id >= TPACPI_RFK_SW_MAX)
+		return -ENODEV;
+
+	while ((cmd = next_cmd(&buf))) {
+		if (strlencmp(cmd, "enable") == 0)
+			status = TPACPI_RFK_RADIO_ON;
+		else if (strlencmp(cmd, "disable") == 0)
+			status = TPACPI_RFK_RADIO_OFF;
+		else
+			return -EINVAL;
+	}
+
+	if (status != -1) {
+		tpacpi_disclose_usertask("procfs", "attempt to %s %s\n",
+				(status == TPACPI_RFK_RADIO_ON) ?
+						"enable" : "disable",
+				tpacpi_rfkill_names[id]);
+		res = (tpacpi_rfkill_switches[id]->ops->set_status)(status);
+		tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[id]);
+	}
+
+	return res;
+}
+
 /*************************************************************************
  * thinkpad-acpi driver attributes
  */
@@ -1127,8 +1393,6 @@ static DRIVER_ATTR(version, S_IRUGO,
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 
-static void tpacpi_send_radiosw_update(void);
-
 /* wlsw_emulstate ------------------------------------------------------ */
 static ssize_t tpacpi_driver_wlsw_emulstate_show(struct device_driver *drv,
 						char *buf)
@@ -1144,11 +1408,10 @@ static ssize_t tpacpi_driver_wlsw_emulstate_store(struct device_driver *drv,
 	if (parse_strtoul(buf, 1, &t))
 		return -EINVAL;
 
-	if (tpacpi_wlsw_emulstate != t) {
-		tpacpi_wlsw_emulstate = !!t;
-		tpacpi_send_radiosw_update();
-	} else
+	if (tpacpi_wlsw_emulstate != !!t) {
 		tpacpi_wlsw_emulstate = !!t;
+		tpacpi_rfk_update_hwblock_state(!t);	/* negative logic */
+	}
 
 	return count;
 }
@@ -1463,17 +1726,23 @@ static struct attribute_set *hotkey_dev_attributes;
 /* HKEY.MHKG() return bits */
 #define TP_HOTKEY_TABLET_MASK (1 << 3)
 
-static int hotkey_get_wlsw(int *status)
+static int hotkey_get_wlsw(void)
 {
+	int status;
+
+	if (!tp_features.hotkey_wlsw)
+		return -ENODEV;
+
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
-	if (dbg_wlswemul) {
-		*status = !!tpacpi_wlsw_emulstate;
-		return 0;
-	}
+	if (dbg_wlswemul)
+		return (tpacpi_wlsw_emulstate) ?
+				TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 #endif
-	if (!acpi_evalf(hkey_handle, status, "WLSW", "d"))
+
+	if (!acpi_evalf(hkey_handle, &status, "WLSW", "d"))
 		return -EIO;
-	return 0;
+
+	return (status) ? TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 }
 
 static int hotkey_get_tablet_mode(int *status)
@@ -2107,12 +2376,16 @@ static ssize_t hotkey_radio_sw_show(struct device *dev,
 			   struct device_attribute *attr,
 			   char *buf)
 {
-	int res, s;
-	res = hotkey_get_wlsw(&s);
+	int res;
+	res = hotkey_get_wlsw();
 	if (res < 0)
 		return res;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", !!s);
+	/* Opportunistic update */
+	tpacpi_rfk_update_hwblock_state((res == TPACPI_RFK_RADIO_OFF));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			(res == TPACPI_RFK_RADIO_OFF) ? 0 : 1);
 }
 
 static struct device_attribute dev_attr_hotkey_radio_sw =
@@ -2223,30 +2496,52 @@ static struct attribute *hotkey_mask_attributes[] __initdata = {
 	&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
 };
 
-static void bluetooth_update_rfk(void);
-static void wan_update_rfk(void);
-static void uwb_update_rfk(void);
+/*
+ * Sync both the hw and sw blocking state of all switches
+ */
 static void tpacpi_send_radiosw_update(void)
 {
 	int wlsw;
 
-	/* Sync these BEFORE sending any rfkill events */
-	if (tp_features.bluetooth)
-		bluetooth_update_rfk();
-	if (tp_features.wan)
-		wan_update_rfk();
-	if (tp_features.uwb)
-		uwb_update_rfk();
+	/*
+	 * We must sync all rfkill controllers *before* issuing any
+	 * rfkill input events, or we will race the rfkill core input
+	 * handler.
+	 *
+	 * tpacpi_inputdev_send_mutex works as a syncronization point
+	 * for the above.
+	 *
+	 * We optimize to avoid numerous calls to hotkey_get_wlsw.
+	 */
+
+	wlsw = hotkey_get_wlsw();
+
+	/* Sync hw blocking state first if it is hw-blocked */
+	if (wlsw == TPACPI_RFK_RADIO_OFF)
+		tpacpi_rfk_update_hwblock_state(true);
 
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
+	/* Sync sw blocking state */
+	tpacpi_rfk_update_swstate_all();
+
+	/* Sync hw blocking state last if it is hw-unblocked */
+	if (wlsw == TPACPI_RFK_RADIO_ON)
+		tpacpi_rfk_update_hwblock_state(false);
+
+	/* Issue rfkill input event for WLSW switch */
+	if (!(wlsw < 0)) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
 
 		input_report_switch(tpacpi_inputdev,
-				    SW_RFKILL_ALL, !!wlsw);
+				    SW_RFKILL_ALL, (wlsw > 0));
 		input_sync(tpacpi_inputdev);
 
 		mutex_unlock(&tpacpi_inputdev_send_mutex);
 	}
+
+	/*
+	 * this can be unconditional, as we will poll state again
+	 * if userspace uses the notify to read data
+	 */
 	hotkey_radio_sw_notify_change();
 }
 
@@ -3056,8 +3351,6 @@ enum {
 
 #define TPACPI_RFK_BLUETOOTH_SW_NAME	"tpacpi_bluetooth_sw"
 
-static struct rfkill *tpacpi_bluetooth_rfkill;
-
 static void bluetooth_suspend(pm_message_t state)
 {
 	/* Try to make sure radio will resume powered off */
@@ -3067,83 +3360,47 @@ static void bluetooth_suspend(pm_message_t state)
 			"bluetooth power down on resume request failed\n");
 }
 
-static int bluetooth_get_radiosw(void)
+static int bluetooth_get_status(void)
 {
 	int status;
 
-	if (!tp_features.bluetooth)
-		return -ENODEV;
-
-	/* WLSW overrides bluetooth in firmware/hardware, reflect that */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
-		return RFKILL_STATE_HARD_BLOCKED;
-
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_bluetoothemul)
 		return (tpacpi_bluetooth_emulstate) ?
-			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+		       TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 #endif
 
 	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
 		return -EIO;
 
 	return ((status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0) ?
-		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
-}
-
-static void bluetooth_update_rfk(void)
-{
-	int status;
-
-	if (!tpacpi_bluetooth_rfkill)
-		return;
-
-	status = bluetooth_get_radiosw();
-	if (status < 0)
-		return;
-	rfkill_force_state(tpacpi_bluetooth_rfkill, status);
-
-	vdbg_printk(TPACPI_DBG_RFKILL,
-		"forced rfkill state to %d\n",
-		status);
+			TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 }
 
-static int bluetooth_set_radiosw(int radio_on, int update_rfk)
+static int bluetooth_set_status(enum tpacpi_rfkill_state state)
 {
 	int status;
 
-	if (!tp_features.bluetooth)
-		return -ENODEV;
-
-	/* WLSW overrides bluetooth in firmware/hardware, but there is no
-	 * reason to risk weird behaviour. */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
-	    && radio_on)
-		return -EPERM;
-
 	vdbg_printk(TPACPI_DBG_RFKILL,
-		"will %s bluetooth\n", radio_on ? "enable" : "disable");
+		"will attempt to %s bluetooth\n",
+		(state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_bluetoothemul) {
-		tpacpi_bluetooth_emulstate = !!radio_on;
-		if (update_rfk)
-			bluetooth_update_rfk();
+		tpacpi_bluetooth_emulstate = (state == TPACPI_RFK_RADIO_ON);
 		return 0;
 	}
 #endif
 
 	/* We make sure to keep TP_ACPI_BLUETOOTH_RESUMECTRL off */
-	if (radio_on)
+	if (state == TPACPI_RFK_RADIO_ON)
 		status = TP_ACPI_BLUETOOTH_RADIOSSW;
 	else
 		status = 0;
+
 	if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
 		return -EIO;
 
-	if (update_rfk)
-		bluetooth_update_rfk();
-
 	return 0;
 }
 
@@ -3152,35 +3409,16 @@ static ssize_t bluetooth_enable_show(struct device *dev,
 			   struct device_attribute *attr,
 			   char *buf)
 {
-	int status;
-
-	printk_deprecated_rfkill_attribute("bluetooth_enable");
-
-	status = bluetooth_get_radiosw();
-	if (status < 0)
-		return status;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			(status == RFKILL_STATE_UNBLOCKED) ? 1 : 0);
+	return tpacpi_rfk_sysfs_enable_show(TPACPI_RFK_BLUETOOTH_SW_ID,
+			attr, buf);
 }
 
 static ssize_t bluetooth_enable_store(struct device *dev,
 			    struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	unsigned long t;
-	int res;
-
-	printk_deprecated_rfkill_attribute("bluetooth_enable");
-
-	if (parse_strtoul(buf, 1, &t))
-		return -EINVAL;
-
-	tpacpi_disclose_usertask("bluetooth_enable", "set to %ld\n", t);
-
-	res = bluetooth_set_radiosw(t, 1);
-
-	return (res) ? res : count;
+	return tpacpi_rfk_sysfs_enable_store(TPACPI_RFK_BLUETOOTH_SW_ID,
+				attr, buf, count);
 }
 
 static struct device_attribute dev_attr_bluetooth_enable =
@@ -3198,23 +3436,10 @@ static const struct attribute_group bluetooth_attr_group = {
 	.attrs = bluetooth_attributes,
 };
 
-static int tpacpi_bluetooth_rfk_get(void *data, enum rfkill_state *state)
-{
-	int bts = bluetooth_get_radiosw();
-
-	if (bts < 0)
-		return bts;
-
-	*state = bts;
-	return 0;
-}
-
-static int tpacpi_bluetooth_rfk_set(void *data, enum rfkill_state state)
-{
-	dbg_printk(TPACPI_DBG_RFKILL,
-		   "request to change radio state to %d\n", state);
-	return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
-}
+static const struct tpacpi_rfk_ops bluetooth_tprfk_ops = {
+	.get_status = bluetooth_get_status,
+	.set_status = bluetooth_set_status,
+};
 
 static void bluetooth_shutdown(void)
 {
@@ -3230,13 +3455,12 @@ static void bluetooth_shutdown(void)
 
 static void bluetooth_exit(void)
 {
-	bluetooth_shutdown();
-
-	if (tpacpi_bluetooth_rfkill)
-		rfkill_unregister(tpacpi_bluetooth_rfkill);
-
 	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
 			&bluetooth_attr_group);
+
+	tpacpi_destroy_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID);
+
+	bluetooth_shutdown();
 }
 
 static int __init bluetooth_init(struct ibm_init_struct *iibm)
@@ -3277,20 +3501,18 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 	if (!tp_features.bluetooth)
 		return 1;
 
-	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
-				&bluetooth_attr_group);
-	if (res)
-		return res;
-
 	res = tpacpi_new_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID,
-				&tpacpi_bluetooth_rfkill,
+				&bluetooth_tprfk_ops,
 				RFKILL_TYPE_BLUETOOTH,
 				TPACPI_RFK_BLUETOOTH_SW_NAME,
-				true,
-				tpacpi_bluetooth_rfk_set,
-				tpacpi_bluetooth_rfk_get);
+				true);
+	if (res)
+		return res;
+
+	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+				&bluetooth_attr_group);
 	if (res) {
-		bluetooth_exit();
+		tpacpi_destroy_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID);
 		return res;
 	}
 
@@ -3300,46 +3522,12 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 /* procfs -------------------------------------------------------------- */
 static int bluetooth_read(char *p)
 {
-	int len = 0;
-	int status = bluetooth_get_radiosw();
-
-	if (!tp_features.bluetooth)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else {
-		len += sprintf(p + len, "status:\t\t%s\n",
-				(status == RFKILL_STATE_UNBLOCKED) ?
-					"enabled" : "disabled");
-		len += sprintf(p + len, "commands:\tenable, disable\n");
-	}
-
-	return len;
+	return tpacpi_rfk_procfs_read(TPACPI_RFK_BLUETOOTH_SW_ID, p);
 }
 
 static int bluetooth_write(char *buf)
 {
-	char *cmd;
-	int state = -1;
-
-	if (!tp_features.bluetooth)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			state = 1;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			state = 0;
-		} else
-			return -EINVAL;
-	}
-
-	if (state != -1) {
-		tpacpi_disclose_usertask("procfs bluetooth",
-			"attempt to %s\n",
-			state ? "enable" : "disable");
-		bluetooth_set_radiosw(state, 1);
-	}
-
-	return 0;
+	return tpacpi_rfk_procfs_write(TPACPI_RFK_BLUETOOTH_SW_ID, buf);
 }
 
 static struct ibm_struct bluetooth_driver_data = {
@@ -3365,8 +3553,6 @@ enum {
 
 #define TPACPI_RFK_WWAN_SW_NAME		"tpacpi_wwan_sw"
 
-static struct rfkill *tpacpi_wan_rfkill;
-
 static void wan_suspend(pm_message_t state)
 {
 	/* Try to make sure radio will resume powered off */
@@ -3376,83 +3562,47 @@ static void wan_suspend(pm_message_t state)
 			"WWAN power down on resume request failed\n");
 }
 
-static int wan_get_radiosw(void)
+static int wan_get_status(void)
 {
 	int status;
 
-	if (!tp_features.wan)
-		return -ENODEV;
-
-	/* WLSW overrides WWAN in firmware/hardware, reflect that */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
-		return RFKILL_STATE_HARD_BLOCKED;
-
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_wwanemul)
 		return (tpacpi_wwan_emulstate) ?
-			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+		       TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 #endif
 
 	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
 		return -EIO;
 
 	return ((status & TP_ACPI_WANCARD_RADIOSSW) != 0) ?
-		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
-}
-
-static void wan_update_rfk(void)
-{
-	int status;
-
-	if (!tpacpi_wan_rfkill)
-		return;
-
-	status = wan_get_radiosw();
-	if (status < 0)
-		return;
-	rfkill_force_state(tpacpi_wan_rfkill, status);
-
-	vdbg_printk(TPACPI_DBG_RFKILL,
-		"forced rfkill state to %d\n",
-		status);
+			TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 }
 
-static int wan_set_radiosw(int radio_on, int update_rfk)
+static int wan_set_status(enum tpacpi_rfkill_state state)
 {
 	int status;
 
-	if (!tp_features.wan)
-		return -ENODEV;
-
-	/* WLSW overrides bluetooth in firmware/hardware, but there is no
-	 * reason to risk weird behaviour. */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
-	    && radio_on)
-		return -EPERM;
-
 	vdbg_printk(TPACPI_DBG_RFKILL,
-		"will %s WWAN\n", radio_on ? "enable" : "disable");
+		"will attempt to %s wwan\n",
+		(state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_wwanemul) {
-		tpacpi_wwan_emulstate = !!radio_on;
-		if (update_rfk)
-			wan_update_rfk();
+		tpacpi_wwan_emulstate = (state == TPACPI_RFK_RADIO_ON);
 		return 0;
 	}
 #endif
 
 	/* We make sure to keep TP_ACPI_WANCARD_RESUMECTRL off */
-	if (radio_on)
+	if (state == TPACPI_RFK_RADIO_ON)
 		status = TP_ACPI_WANCARD_RADIOSSW;
 	else
 		status = 0;
+
 	if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
 		return -EIO;
 
-	if (update_rfk)
-		wan_update_rfk();
-
 	return 0;
 }
 
@@ -3461,35 +3611,16 @@ static ssize_t wan_enable_show(struct device *dev,
 			   struct device_attribute *attr,
 			   char *buf)
 {
-	int status;
-
-	printk_deprecated_rfkill_attribute("wwan_enable");
-
-	status = wan_get_radiosw();
-	if (status < 0)
-		return status;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			(status == RFKILL_STATE_UNBLOCKED) ? 1 : 0);
+	return tpacpi_rfk_sysfs_enable_show(TPACPI_RFK_WWAN_SW_ID,
+			attr, buf);
 }
 
 static ssize_t wan_enable_store(struct device *dev,
 			    struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	unsigned long t;
-	int res;
-
-	printk_deprecated_rfkill_attribute("wwan_enable");
-
-	if (parse_strtoul(buf, 1, &t))
-		return -EINVAL;
-
-	tpacpi_disclose_usertask("wwan_enable", "set to %ld\n", t);
-
-	res = wan_set_radiosw(t, 1);
-
-	return (res) ? res : count;
+	return tpacpi_rfk_sysfs_enable_store(TPACPI_RFK_WWAN_SW_ID,
+			attr, buf, count);
 }
 
 static struct device_attribute dev_attr_wan_enable =
@@ -3507,23 +3638,10 @@ static const struct attribute_group wan_attr_group = {
 	.attrs = wan_attributes,
 };
 
-static int tpacpi_wan_rfk_get(void *data, enum rfkill_state *state)
-{
-	int wans = wan_get_radiosw();
-
-	if (wans < 0)
-		return wans;
-
-	*state = wans;
-	return 0;
-}
-
-static int tpacpi_wan_rfk_set(void *data, enum rfkill_state state)
-{
-	dbg_printk(TPACPI_DBG_RFKILL,
-		   "request to change radio state to %d\n", state);
-	return wan_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
-}
+static const struct tpacpi_rfk_ops wan_tprfk_ops = {
+	.get_status = wan_get_status,
+	.set_status = wan_set_status,
+};
 
 static void wan_shutdown(void)
 {
@@ -3539,13 +3657,12 @@ static void wan_shutdown(void)
 
 static void wan_exit(void)
 {
-	wan_shutdown();
-
-	if (tpacpi_wan_rfkill)
-		rfkill_unregister(tpacpi_wan_rfkill);
-
 	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
 		&wan_attr_group);
+
+	tpacpi_destroy_rfkill(TPACPI_RFK_WWAN_SW_ID);
+
+	wan_shutdown();
 }
 
 static int __init wan_init(struct ibm_init_struct *iibm)
@@ -3584,20 +3701,19 @@ static int __init wan_init(struct ibm_init_struct *iibm)
 	if (!tp_features.wan)
 		return 1;
 
-	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
-				&wan_attr_group);
-	if (res)
-		return res;
-
 	res = tpacpi_new_rfkill(TPACPI_RFK_WWAN_SW_ID,
-				&tpacpi_wan_rfkill,
+				&wan_tprfk_ops,
 				RFKILL_TYPE_WWAN,
 				TPACPI_RFK_WWAN_SW_NAME,
-				true,
-				tpacpi_wan_rfk_set,
-				tpacpi_wan_rfk_get);
+				true);
+	if (res)
+		return res;
+
+	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+				&wan_attr_group);
+
 	if (res) {
-		wan_exit();
+		tpacpi_destroy_rfkill(TPACPI_RFK_WWAN_SW_ID);
 		return res;
 	}
 
@@ -3607,48 +3723,12 @@ static int __init wan_init(struct ibm_init_struct *iibm)
 /* procfs -------------------------------------------------------------- */
 static int wan_read(char *p)
 {
-	int len = 0;
-	int status = wan_get_radiosw();
-
-	tpacpi_disclose_usertask("procfs wan", "read");
-
-	if (!tp_features.wan)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else {
-		len += sprintf(p + len, "status:\t\t%s\n",
-				(status == RFKILL_STATE_UNBLOCKED) ?
-					"enabled" : "disabled");
-		len += sprintf(p + len, "commands:\tenable, disable\n");
-	}
-
-	return len;
+	return tpacpi_rfk_procfs_read(TPACPI_RFK_WWAN_SW_ID, p);
 }
 
 static int wan_write(char *buf)
 {
-	char *cmd;
-	int state = -1;
-
-	if (!tp_features.wan)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			state = 1;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			state = 0;
-		} else
-			return -EINVAL;
-	}
-
-	if (state != -1) {
-		tpacpi_disclose_usertask("procfs wan",
-			"attempt to %s\n",
-			state ? "enable" : "disable");
-		wan_set_radiosw(state, 1);
-	}
-
-	return 0;
+	return tpacpi_rfk_procfs_write(TPACPI_RFK_WWAN_SW_ID, buf);
 }
 
 static struct ibm_struct wan_driver_data = {
@@ -3672,108 +3752,59 @@ enum {
 
 #define TPACPI_RFK_UWB_SW_NAME	"tpacpi_uwb_sw"
 
-static struct rfkill *tpacpi_uwb_rfkill;
-
-static int uwb_get_radiosw(void)
+static int uwb_get_status(void)
 {
 	int status;
 
-	if (!tp_features.uwb)
-		return -ENODEV;
-
-	/* WLSW overrides UWB in firmware/hardware, reflect that */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
-		return RFKILL_STATE_HARD_BLOCKED;
-
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_uwbemul)
 		return (tpacpi_uwb_emulstate) ?
-			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+		       TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 #endif
 
 	if (!acpi_evalf(hkey_handle, &status, "GUWB", "d"))
 		return -EIO;
 
 	return ((status & TP_ACPI_UWB_RADIOSSW) != 0) ?
-		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+			TPACPI_RFK_RADIO_ON : TPACPI_RFK_RADIO_OFF;
 }
 
-static void uwb_update_rfk(void)
+static int uwb_set_status(enum tpacpi_rfkill_state state)
 {
 	int status;
 
-	if (!tpacpi_uwb_rfkill)
-		return;
-
-	status = uwb_get_radiosw();
-	if (status < 0)
-		return;
-	rfkill_force_state(tpacpi_uwb_rfkill, status);
-
 	vdbg_printk(TPACPI_DBG_RFKILL,
-		"forced rfkill state to %d\n",
-		status);
-}
-
-static int uwb_set_radiosw(int radio_on, int update_rfk)
-{
-	int status;
-
-	if (!tp_features.uwb)
-		return -ENODEV;
-
-	/* WLSW overrides UWB in firmware/hardware, but there is no
-	 * reason to risk weird behaviour. */
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
-	    && radio_on)
-		return -EPERM;
-
-	vdbg_printk(TPACPI_DBG_RFKILL,
-			"will %s UWB\n", radio_on ? "enable" : "disable");
+		"will attempt to %s UWB\n",
+		(state == TPACPI_RFK_RADIO_ON) ? "enable" : "disable");
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_uwbemul) {
-		tpacpi_uwb_emulstate = !!radio_on;
-		if (update_rfk)
-			uwb_update_rfk();
+		tpacpi_uwb_emulstate = (state == TPACPI_RFK_RADIO_ON);
 		return 0;
 	}
 #endif
 
-	status = (radio_on) ? TP_ACPI_UWB_RADIOSSW : 0;
+	if (state == TPACPI_RFK_RADIO_ON)
+		status = TP_ACPI_UWB_RADIOSSW;
+	else
+		status = 0;
+
 	if (!acpi_evalf(hkey_handle, NULL, "SUWB", "vd", status))
 		return -EIO;
 
-	if (update_rfk)
-		uwb_update_rfk();
-
 	return 0;
 }
 
 /* --------------------------------------------------------------------- */
 
-static int tpacpi_uwb_rfk_get(void *data, enum rfkill_state *state)
-{
-	int uwbs = uwb_get_radiosw();
-
-	if (uwbs < 0)
-		return uwbs;
-
-	*state = uwbs;
-	return 0;
-}
-
-static int tpacpi_uwb_rfk_set(void *data, enum rfkill_state state)
-{
-	dbg_printk(TPACPI_DBG_RFKILL,
-		   "request to change radio state to %d\n", state);
-	return uwb_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
-}
+static const struct tpacpi_rfk_ops uwb_tprfk_ops = {
+	.get_status = uwb_get_status,
+	.set_status = uwb_set_status,
+};
 
 static void uwb_exit(void)
 {
-	if (tpacpi_uwb_rfkill)
-		rfkill_unregister(tpacpi_uwb_rfkill);
+	tpacpi_destroy_rfkill(TPACPI_RFK_UWB_SW_ID);
 }
 
 static int __init uwb_init(struct ibm_init_struct *iibm)
@@ -3813,13 +3844,10 @@ static int __init uwb_init(struct ibm_init_struct *iibm)
 		return 1;
 
 	res = tpacpi_new_rfkill(TPACPI_RFK_UWB_SW_ID,
-				&tpacpi_uwb_rfkill,
+				&uwb_tprfk_ops,
 				RFKILL_TYPE_UWB,
 				TPACPI_RFK_UWB_SW_NAME,
-				false,
-				tpacpi_uwb_rfk_set,
-				tpacpi_uwb_rfk_get);
-
+				false);
 	return res;
 }
 
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 9f187265db8..81d31ea507d 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -45,7 +45,6 @@
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
 #include <linux/rfkill.h>
-#include <linux/input-polldev.h>
 
 #include <asm/uaccess.h>
 
@@ -250,21 +249,15 @@ static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result)
 
 struct toshiba_acpi_dev {
 	struct platform_device *p_dev;
-	struct rfkill *rfk_dev;
-	struct input_polled_dev *poll_dev;
+	struct rfkill *bt_rfk;
 
 	const char *bt_name;
-	const char *rfk_name;
-
-	bool last_rfk_state;
 
 	struct mutex mutex;
 };
 
 static struct toshiba_acpi_dev toshiba_acpi = {
 	.bt_name = "Toshiba Bluetooth",
-	.rfk_name = "Toshiba RFKill Switch",
-	.last_rfk_state = false,
 };
 
 /* Bluetooth rfkill handlers */
@@ -283,21 +276,6 @@ static u32 hci_get_bt_present(bool *present)
 	return hci_result;
 }
 
-static u32 hci_get_bt_on(bool *on)
-{
-	u32 hci_result;
-	u32 value, value2;
-
-	value = 0;
-	value2 = 0x0001;
-	hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
-	if (hci_result == HCI_SUCCESS)
-		*on = (value & HCI_WIRELESS_BT_POWER) &&
-		      (value & HCI_WIRELESS_BT_ATTACH);
-
-	return hci_result;
-}
-
 static u32 hci_get_radio_state(bool *radio_state)
 {
 	u32 hci_result;
@@ -311,70 +289,67 @@ static u32 hci_get_radio_state(bool *radio_state)
 	return hci_result;
 }
 
-static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state)
+static int bt_rfkill_set_block(void *data, bool blocked)
 {
+	struct toshiba_acpi_dev *dev = data;
 	u32 result1, result2;
 	u32 value;
+	int err;
 	bool radio_state;
-	struct toshiba_acpi_dev *dev = data;
 
-	value = (state == RFKILL_STATE_UNBLOCKED);
+	value = (blocked == false);
 
-	if (hci_get_radio_state(&radio_state) != HCI_SUCCESS)
-		return -EFAULT;
+	mutex_lock(&dev->mutex);
+	if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) {
+		err = -EBUSY;
+		goto out;
+	}
 
-	switch (state) {
-	case RFKILL_STATE_UNBLOCKED:
-		if (!radio_state)
-			return -EPERM;
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		break;
-	default:
-		return -EINVAL;
+	if (!radio_state) {
+		err = 0;
+		goto out;
 	}
 
-	mutex_lock(&dev->mutex);
 	hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1);
 	hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2);
-	mutex_unlock(&dev->mutex);
 
 	if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS)
-		return -EFAULT;
-
-	return 0;
+		err = -EBUSY;
+	else
+		err = 0;
+ out:
+	mutex_unlock(&dev->mutex);
+	return err;
 }
 
-static void bt_poll_rfkill(struct input_polled_dev *poll_dev)
+static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
 {
-	bool state_changed;
 	bool new_rfk_state;
 	bool value;
 	u32 hci_result;
-	struct toshiba_acpi_dev *dev = poll_dev->private;
+	struct toshiba_acpi_dev *dev = data;
+
+	mutex_lock(&dev->mutex);
 
 	hci_result = hci_get_radio_state(&value);
-	if (hci_result != HCI_SUCCESS)
-		return; /* Can't do anything useful */
+	if (hci_result != HCI_SUCCESS) {
+		/* Can't do anything useful */
+		mutex_unlock(&dev->mutex);
+	}
 
 	new_rfk_state = value;
 
-	mutex_lock(&dev->mutex);
-	state_changed = new_rfk_state != dev->last_rfk_state;
-	dev->last_rfk_state = new_rfk_state;
 	mutex_unlock(&dev->mutex);
 
-	if (unlikely(state_changed)) {
-		rfkill_force_state(dev->rfk_dev,
-				   new_rfk_state ?
-				   RFKILL_STATE_SOFT_BLOCKED :
-				   RFKILL_STATE_HARD_BLOCKED);
-		input_report_switch(poll_dev->input, SW_RFKILL_ALL,
-				    new_rfk_state);
-		input_sync(poll_dev->input);
-	}
+	if (rfkill_set_hw_state(rfkill, !new_rfk_state))
+		bt_rfkill_set_block(data, true);
 }
 
+static const struct rfkill_ops toshiba_rfk_ops = {
+	.set_block = bt_rfkill_set_block,
+	.poll = bt_rfkill_poll,
+};
+
 static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
 static struct backlight_device *toshiba_backlight_device;
 static int force_fan;
@@ -702,14 +677,11 @@ static struct backlight_ops toshiba_backlight_data = {
 
 static void toshiba_acpi_exit(void)
 {
-	if (toshiba_acpi.poll_dev) {
-		input_unregister_polled_device(toshiba_acpi.poll_dev);
-		input_free_polled_device(toshiba_acpi.poll_dev);
+	if (toshiba_acpi.bt_rfk) {
+		rfkill_unregister(toshiba_acpi.bt_rfk);
+		rfkill_destroy(toshiba_acpi.bt_rfk);
 	}
 
-	if (toshiba_acpi.rfk_dev)
-		rfkill_unregister(toshiba_acpi.rfk_dev);
-
 	if (toshiba_backlight_device)
 		backlight_device_unregister(toshiba_backlight_device);
 
@@ -728,8 +700,6 @@ static int __init toshiba_acpi_init(void)
 	acpi_status status = AE_OK;
 	u32 hci_result;
 	bool bt_present;
-	bool bt_on;
-	bool radio_on;
 	int ret = 0;
 
 	if (acpi_disabled)
@@ -793,61 +763,21 @@ static int __init toshiba_acpi_init(void)
 
 	/* Register rfkill switch for Bluetooth */
 	if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) {
-		toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev,
-							RFKILL_TYPE_BLUETOOTH);
-		if (!toshiba_acpi.rfk_dev) {
+		toshiba_acpi.bt_rfk = rfkill_alloc(toshiba_acpi.bt_name,
+						   &toshiba_acpi.p_dev->dev,
+						   RFKILL_TYPE_BLUETOOTH,
+						   &toshiba_rfk_ops,
+						   &toshiba_acpi);
+		if (!toshiba_acpi.bt_rfk) {
 			printk(MY_ERR "unable to allocate rfkill device\n");
 			toshiba_acpi_exit();
 			return -ENOMEM;
 		}
 
-		toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name;
-		toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio;
-		toshiba_acpi.rfk_dev->user_claim_unsupported = 1;
-		toshiba_acpi.rfk_dev->data = &toshiba_acpi;
-
-		if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) {
-			toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED;
-		} else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS &&
-			   radio_on) {
-			toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED;
-		} else {
-			toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED;
-		}
-
-		ret = rfkill_register(toshiba_acpi.rfk_dev);
+		ret = rfkill_register(toshiba_acpi.bt_rfk);
 		if (ret) {
 			printk(MY_ERR "unable to register rfkill device\n");
-			toshiba_acpi_exit();
-			return -ENOMEM;
-		}
-
-		/* Register input device for kill switch */
-		toshiba_acpi.poll_dev = input_allocate_polled_device();
-		if (!toshiba_acpi.poll_dev) {
-			printk(MY_ERR
-			       "unable to allocate kill-switch input device\n");
-			toshiba_acpi_exit();
-			return -ENOMEM;
-		}
-		toshiba_acpi.poll_dev->private = &toshiba_acpi;
-		toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-		toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
-		toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-		toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-		/* Toshiba USB ID */
-		toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
-		set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-		set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-		input_report_switch(toshiba_acpi.poll_dev->input,
-				    SW_RFKILL_ALL, TRUE);
-		input_sync(toshiba_acpi.poll_dev->input);
-
-		ret = input_register_polled_device(toshiba_acpi.poll_dev);
-		if (ret) {
-			printk(MY_ERR
-			       "unable to register kill-switch input device\n");
+			rfkill_destroy(toshiba_acpi.bt_rfk);
 			toshiba_acpi_exit();
 			return ret;
 		}
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index f17513dd9d4..88cb7408861 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -706,7 +706,7 @@ static void ps3_sys_manager_work(struct ps3_system_bus_device *dev)
 	ps3_vuart_read_async(dev, PS3_SM_RX_MSG_LEN_MIN);
 }
 
-static int ps3_sys_manager_probe(struct ps3_system_bus_device *dev)
+static int __devinit ps3_sys_manager_probe(struct ps3_system_bus_device *dev)
 {
 	int result;
 	struct ps3_sys_manager_ops ops;
diff --git a/drivers/ps3/ps3av.c b/drivers/ps3/ps3av.c
index 235e87fcb49..e82d8c9c6cd 100644
--- a/drivers/ps3/ps3av.c
+++ b/drivers/ps3/ps3av.c
@@ -80,12 +80,12 @@ static const struct avset_video_mode {
 	{     0, }, /* auto */
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_480I,       A_N,  720,  480},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_480P,       A_N,  720,  480},
-	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_720P_60HZ,  A_N, 1280,  720},
+	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_720P_60HZ,  A_W, 1280,  720},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_1080I_60HZ, A_W, 1920, 1080},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_1080P_60HZ, A_W, 1920, 1080},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_576I,       A_N,  720,  576},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_576P,       A_N,  720,  576},
-	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_720P_50HZ,  A_N, 1280,  720},
+	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_720P_50HZ,  A_W, 1280,  720},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_1080I_50HZ, A_W, 1920, 1080},
 	{YUV444, XRGB, PS3AV_CMD_VIDEO_VID_1080P_50HZ, A_W, 1920, 1080},
 	{  RGB8, XRGB, PS3AV_CMD_VIDEO_VID_WXGA,       A_W, 1280,  768},
@@ -937,7 +937,7 @@ int ps3av_audio_mute(int mute)
 
 EXPORT_SYMBOL_GPL(ps3av_audio_mute);
 
-static int ps3av_probe(struct ps3_system_bus_device *dev)
+static int __devinit ps3av_probe(struct ps3_system_bus_device *dev)
 {
 	int res;
 	int id;
@@ -1048,7 +1048,7 @@ static struct ps3_vuart_port_driver ps3av_driver = {
 	.shutdown = ps3av_shutdown,
 };
 
-static int ps3av_module_init(void)
+static int __init ps3av_module_init(void)
 {
 	int error;
 
diff --git a/drivers/ps3/ps3av_cmd.c b/drivers/ps3/ps3av_cmd.c
index 716596e8e5b..f555fedd507 100644
--- a/drivers/ps3/ps3av_cmd.c
+++ b/drivers/ps3/ps3av_cmd.c
@@ -21,9 +21,10 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+
 #include <asm/ps3av.h>
-#include <asm/ps3fb.h>
 #include <asm/ps3.h>
+#include <asm/ps3gpu.h>
 
 #include "vuart.h"
 
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 74d0bfa3f31..3b78540288c 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -290,7 +290,7 @@ static void __devinit rio_add_device(struct rio_dev *rdev)
  * to a RIO device on success or NULL on failure.
  *
  */
-static struct rio_dev *rio_setup_device(struct rio_net *net,
+static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 					struct rio_mport *port, u16 destid,
 					u8 hopcount, int do_enum)
 {
@@ -559,7 +559,7 @@ static void rio_net_add_mport(struct rio_net *net, struct rio_mport *port)
  * Recursively enumerates a RIO network.  Transactions are sent via the
  * master port passed in @port.
  */
-static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
+static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 			 u8 hopcount)
 {
 	int port_num;
@@ -718,7 +718,7 @@ static int rio_enum_complete(struct rio_mport *port)
  * Recursively discovers a RIO network.  Transactions are sent via the
  * master port passed in @port.
  */
-static int
+static int __devinit
 rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 	      u8 hopcount)
 {
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index e58c0ce65aa..f4317798e47 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -47,6 +47,16 @@ config REGULATOR_VIRTUAL_CONSUMER
 
           If unsure, say no.
 
+config REGULATOR_USERSPACE_CONSUMER
+	tristate "Userspace regulator consumer support"
+	default n
+	help
+	  There are some classes of devices that are controlled entirely
+	  from user space. Usersapce consumer driver provides ability to
+	  control power supplies for such devices.
+
+          If unsure, say no.
+
 config REGULATOR_BQ24022
 	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
 	default n
@@ -56,6 +66,15 @@ config REGULATOR_BQ24022
 	  charging select between 100 mA and 500 mA charging current
 	  limit.
 
+config REGULATOR_MAX1586
+	tristate "Maxim 1586/1587 voltage regulator"
+	depends on I2C
+	default n
+	help
+	  This driver controls a Maxim 1586 or 1587 voltage output
+	  regulator via I2C bus. The provided regulator is suitable
+	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+
 config REGULATOR_TWL4030
 	bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
 	depends on TWL4030_CORE
@@ -91,4 +110,11 @@ config REGULATOR_PCF50633
 	 Say Y here to support the voltage regulators and convertors
 	 on PCF50633
 
+config REGULATOR_LP3971
+	tristate "National Semiconductors LP3971 PMIC regulator driver"
+	depends on I2C
+	help
+	 Say Y here to support the voltage regulators and convertors
+	 on National Semiconductors LP3971 PMIC
+
 endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bac133afc06..4d762c4cccf 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -6,8 +6,11 @@
 obj-$(CONFIG_REGULATOR) += core.o
 obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
+obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index c6628f5a0af..b8b89ef10a8 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -504,7 +504,7 @@ static int __init da903x_regulator_init(void)
 {
 	return platform_driver_register(&da903x_regulator_driver);
 }
-module_init(da903x_regulator_init);
+subsys_initcall(da903x_regulator_init);
 
 static void __exit da903x_regulator_exit(void)
 {
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 23d554628a7..cdc674fb46c 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -44,10 +44,22 @@ static int fixed_voltage_get_voltage(struct regulator_dev *dev)
 	return data->microvolts;
 }
 
+static int fixed_voltage_list_voltage(struct regulator_dev *dev,
+				      unsigned selector)
+{
+	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+	if (selector != 0)
+		return -EINVAL;
+
+	return data->microvolts;
+}
+
 static struct regulator_ops fixed_voltage_ops = {
 	.is_enabled = fixed_voltage_is_enabled,
 	.enable = fixed_voltage_enable,
 	.get_voltage = fixed_voltage_get_voltage,
+	.list_voltage = fixed_voltage_list_voltage,
 };
 
 static int regulator_fixed_voltage_probe(struct platform_device *pdev)
@@ -69,7 +81,8 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
 	}
 	drvdata->desc.type = REGULATOR_VOLTAGE;
 	drvdata->desc.owner = THIS_MODULE;
-	drvdata->desc.ops = &fixed_voltage_ops,
+	drvdata->desc.ops = &fixed_voltage_ops;
+	drvdata->desc.n_voltages = 1;
 
 	drvdata->microvolts = config->microvolts;
 
@@ -117,7 +130,7 @@ static int __init regulator_fixed_voltage_init(void)
 {
 	return platform_driver_register(&regulator_fixed_voltage_driver);
 }
-module_init(regulator_fixed_voltage_init);
+subsys_initcall(regulator_fixed_voltage_init);
 
 static void __exit regulator_fixed_voltage_exit(void)
 {
@@ -128,3 +141,4 @@ module_exit(regulator_fixed_voltage_exit);
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Fixed voltage regulator");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:reg-fixed-voltage");
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
new file mode 100644
index 00000000000..a61018a2769
--- /dev/null
+++ b/drivers/regulator/lp3971.c
@@ -0,0 +1,562 @@
+/*
+ * Regulator driver for National Semiconductors LP3971 PMIC chip
+ *
+ *  Copyright (C) 2009 Samsung Electronics
+ *  Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Based on wm8350.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/lp3971.h>
+
+struct lp3971 {
+	struct device *dev;
+	struct mutex io_lock;
+	struct i2c_client *i2c;
+	int num_regulators;
+	struct regulator_dev **rdev;
+};
+
+static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg);
+static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val);
+
+#define LP3971_SYS_CONTROL1_REG 0x07
+
+/* System control register 1 initial value,
+   bits 4 and 5 are EPROM programmable */
+#define SYS_CONTROL1_INIT_VAL 0x40
+#define SYS_CONTROL1_INIT_MASK 0xCF
+
+#define LP3971_BUCK_VOL_ENABLE_REG 0x10
+#define LP3971_BUCK_VOL_CHANGE_REG 0x20
+
+/*	Voltage control registers shift:
+	LP3971_BUCK1 -> 0
+	LP3971_BUCK2 -> 4
+	LP3971_BUCK3 -> 6
+*/
+#define BUCK_VOL_CHANGE_SHIFT(x) (((1 << x) & ~0x01) << 1)
+#define BUCK_VOL_CHANGE_FLAG_GO 0x01
+#define BUCK_VOL_CHANGE_FLAG_TARGET 0x02
+#define BUCK_VOL_CHANGE_FLAG_MASK 0x03
+
+#define LP3971_BUCK1_BASE 0x23
+#define LP3971_BUCK2_BASE 0x29
+#define LP3971_BUCK3_BASE 0x32
+
+const static int buck_base_addr[] = {
+	LP3971_BUCK1_BASE,
+	LP3971_BUCK2_BASE,
+	LP3971_BUCK3_BASE,
+};
+
+#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
+#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
+
+const static int buck_voltage_map[] = {
+	   0,  800,  850,  900,  950, 1000, 1050, 1100,
+	1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
+	1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
+	3000, 3300,
+};
+
+#define BUCK_TARGET_VOL_MASK 0x3f
+#define BUCK_TARGET_VOL_MIN_IDX 0x01
+#define BUCK_TARGET_VOL_MAX_IDX 0x19
+
+#define LP3971_BUCK_RAMP_REG(x)	(buck_base_addr[x]+2)
+
+#define LP3971_LDO_ENABLE_REG 0x12
+#define LP3971_LDO_VOL_CONTR_BASE 0x39
+
+/*	Voltage control registers:
+	LP3971_LDO1 -> LP3971_LDO_VOL_CONTR_BASE + 0
+	LP3971_LDO2 -> LP3971_LDO_VOL_CONTR_BASE + 0
+	LP3971_LDO3 -> LP3971_LDO_VOL_CONTR_BASE + 1
+	LP3971_LDO4 -> LP3971_LDO_VOL_CONTR_BASE + 1
+	LP3971_LDO5 -> LP3971_LDO_VOL_CONTR_BASE + 2
+*/
+#define LP3971_LDO_VOL_CONTR_REG(x)	(LP3971_LDO_VOL_CONTR_BASE + (x >> 1))
+
+/*	Voltage control registers shift:
+	LP3971_LDO1 -> 0, LP3971_LDO2 -> 4
+	LP3971_LDO3 -> 0, LP3971_LDO4 -> 4
+	LP3971_LDO5 -> 0
+*/
+#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
+#define LDO_VOL_CONTR_MASK 0x0f
+
+const static int ldo45_voltage_map[] = {
+	1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
+	1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
+};
+
+const static int ldo123_voltage_map[] = {
+	1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
+	2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
+};
+
+const static int *ldo_voltage_map[] = {
+	ldo123_voltage_map, /* LDO1 */
+	ldo123_voltage_map, /* LDO2 */
+	ldo123_voltage_map, /* LDO3 */
+	ldo45_voltage_map, /* LDO4 */
+	ldo45_voltage_map, /* LDO5 */
+};
+
+#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
+
+#define LDO_VOL_MIN_IDX 0x00
+#define LDO_VOL_MAX_IDX 0x0f
+
+static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
+{
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
+}
+
+static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	u16 mask = 1 << (1 + ldo);
+	u16 val;
+
+	val = lp3971_reg_read(lp3971, LP3971_LDO_ENABLE_REG);
+	return (val & mask) != 0;
+}
+
+static int lp3971_ldo_enable(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	u16 mask = 1 << (1 + ldo);
+
+	return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, mask);
+}
+
+static int lp3971_ldo_disable(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	u16 mask = 1 << (1 + ldo);
+
+	return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
+}
+
+static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	u16 val, reg;
+
+	reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
+	val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
+
+	return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
+}
+
+static int lp3971_ldo_set_voltage(struct regulator_dev *dev,
+				  int min_uV, int max_uV)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
+	const int *vol_map = LDO_VOL_VALUE_MAP(ldo);
+	u16 val;
+
+	if (min_vol < vol_map[LDO_VOL_MIN_IDX] ||
+	    min_vol > vol_map[LDO_VOL_MAX_IDX])
+		return -EINVAL;
+
+	for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++)
+		if (vol_map[val] >= min_vol)
+			break;
+
+	if (vol_map[val] > max_vol)
+		return -EINVAL;
+
+	return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
+		LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo), val);
+}
+
+static struct regulator_ops lp3971_ldo_ops = {
+	.list_voltage = lp3971_ldo_list_voltage,
+	.is_enabled = lp3971_ldo_is_enabled,
+	.enable = lp3971_ldo_enable,
+	.disable = lp3971_ldo_disable,
+	.get_voltage = lp3971_ldo_get_voltage,
+	.set_voltage = lp3971_ldo_set_voltage,
+};
+
+static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
+{
+	return 1000 * buck_voltage_map[index];
+}
+
+static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	u16 mask = 1 << (buck * 2);
+	u16 val;
+
+	val = lp3971_reg_read(lp3971, LP3971_BUCK_VOL_ENABLE_REG);
+	return (val & mask) != 0;
+}
+
+static int lp3971_dcdc_enable(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	u16 mask = 1 << (buck * 2);
+
+	return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, mask);
+}
+
+static int lp3971_dcdc_disable(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	u16 mask = 1 << (buck * 2);
+
+	return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
+}
+
+static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	u16 reg;
+	int val;
+
+	reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
+	reg &= BUCK_TARGET_VOL_MASK;
+
+	if (reg <= BUCK_TARGET_VOL_MAX_IDX)
+		val = 1000 * buck_voltage_map[reg];
+	else {
+		val = 0;
+		dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
+	}
+
+	return val;
+}
+
+static int lp3971_dcdc_set_voltage(struct regulator_dev *dev,
+				  int min_uV, int max_uV)
+{
+	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
+	int buck = rdev_get_id(dev) - LP3971_DCDC1;
+	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
+	const int *vol_map = buck_voltage_map;
+	u16 val;
+	int ret;
+
+	if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] ||
+	    min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX])
+		return -EINVAL;
+
+	for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX;
+	     val++)
+		if (vol_map[val] >= min_vol)
+			break;
+
+	if (vol_map[val] > max_vol)
+		return -EINVAL;
+
+	ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
+	       BUCK_TARGET_VOL_MASK, val);
+	if (ret)
+		return ret;
+
+	ret = lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
+	       BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
+	       BUCK_VOL_CHANGE_FLAG_GO << BUCK_VOL_CHANGE_SHIFT(buck));
+	if (ret)
+		return ret;
+
+	return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
+	       BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
+	       0 << BUCK_VOL_CHANGE_SHIFT(buck));
+}
+
+static struct regulator_ops lp3971_dcdc_ops = {
+	.list_voltage = lp3971_dcdc_list_voltage,
+	.is_enabled = lp3971_dcdc_is_enabled,
+	.enable = lp3971_dcdc_enable,
+	.disable = lp3971_dcdc_disable,
+	.get_voltage = lp3971_dcdc_get_voltage,
+	.set_voltage = lp3971_dcdc_set_voltage,
+};
+
+static struct regulator_desc regulators[] = {
+	{
+		.name = "LDO1",
+		.id = LP3971_LDO1,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO2",
+		.id = LP3971_LDO2,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO3",
+		.id = LP3971_LDO3,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO4",
+		.id = LP3971_LDO4,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO5",
+		.id = LP3971_LDO5,
+		.ops = &lp3971_ldo_ops,
+		.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC1",
+		.id = LP3971_DCDC1,
+		.ops = &lp3971_dcdc_ops,
+		.n_voltages = ARRAY_SIZE(buck_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC2",
+		.id = LP3971_DCDC2,
+		.ops = &lp3971_dcdc_ops,
+		.n_voltages = ARRAY_SIZE(buck_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "DCDC3",
+		.id = LP3971_DCDC3,
+		.ops = &lp3971_dcdc_ops,
+		.n_voltages = ARRAY_SIZE(buck_voltage_map),
+		.type = REGULATOR_VOLTAGE,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count,
+	u16 *dest)
+{
+	int ret;
+
+	if (count != 1)
+		return -EIO;
+	ret = i2c_smbus_read_byte_data(i2c, reg);
+	if (ret < 0 || count != 1)
+		return -EIO;
+
+	*dest = ret;
+	return 0;
+}
+
+static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count,
+	const u16 *src)
+{
+	int ret;
+
+	if (count != 1)
+		return -EIO;
+	ret = i2c_smbus_write_byte_data(i2c, reg, *src);
+	if (ret >= 0)
+		return 0;
+
+	return ret;
+}
+
+static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg)
+{
+	u16 val = 0;
+
+	mutex_lock(&lp3971->io_lock);
+
+	lp3971_i2c_read(lp3971->i2c, reg, 1, &val);
+
+	dev_dbg(lp3971->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
+		(unsigned)val&0xff);
+
+	mutex_unlock(&lp3971->io_lock);
+
+	return val & 0xff;
+}
+
+static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val)
+{
+	u16 tmp;
+	int ret;
+
+	mutex_lock(&lp3971->io_lock);
+
+	ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp);
+	tmp = (tmp & ~mask) | val;
+	if (ret == 0) {
+		ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp);
+		dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
+			(unsigned)val&0xff);
+	}
+	mutex_unlock(&lp3971->io_lock);
+
+	return ret;
+}
+
+static int setup_regulators(struct lp3971 *lp3971,
+	struct lp3971_platform_data *pdata)
+{
+	int i, err;
+	int num_regulators = pdata->num_regulators;
+	lp3971->num_regulators = num_regulators;
+	lp3971->rdev = kzalloc(sizeof(struct regulator_dev *) * num_regulators,
+		GFP_KERNEL);
+
+	/* Instantiate the regulators */
+	for (i = 0; i < num_regulators; i++) {
+		int id = pdata->regulators[i].id;
+		lp3971->rdev[i] = regulator_register(&regulators[id],
+			lp3971->dev, pdata->regulators[i].initdata, lp3971);
+
+		err = IS_ERR(lp3971->rdev[i]);
+		if (err) {
+			dev_err(lp3971->dev, "regulator init failed: %d\n",
+				err);
+			goto error;
+		}
+	}
+
+	return 0;
+error:
+	for (i = 0; i < num_regulators; i++)
+		if (lp3971->rdev[i])
+			regulator_unregister(lp3971->rdev[i]);
+	kfree(lp3971->rdev);
+	lp3971->rdev = NULL;
+	return err;
+}
+
+static int __devinit lp3971_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct lp3971 *lp3971;
+	struct lp3971_platform_data *pdata = i2c->dev.platform_data;
+	int ret;
+	u16 val;
+
+	lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL);
+	if (lp3971 == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	lp3971->i2c = i2c;
+	lp3971->dev = &i2c->dev;
+	i2c_set_clientdata(i2c, lp3971);
+
+	mutex_init(&lp3971->io_lock);
+
+	/* Detect LP3971 */
+	ret = lp3971_i2c_read(i2c, LP3971_SYS_CONTROL1_REG, 1, &val);
+	if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL)
+		ret = -ENODEV;
+	if (ret < 0) {
+		dev_err(&i2c->dev, "failed to detect device\n");
+		goto err_detect;
+	}
+
+	if (pdata) {
+		ret = setup_regulators(lp3971, pdata);
+		if (ret < 0)
+			goto err_detect;
+	} else
+		dev_warn(lp3971->dev, "No platform init data supplied\n");
+
+	return 0;
+
+err_detect:
+	i2c_set_clientdata(i2c, NULL);
+	kfree(lp3971);
+err:
+	return ret;
+}
+
+static int __devexit lp3971_i2c_remove(struct i2c_client *i2c)
+{
+	struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
+	int i;
+	for (i = 0; i < lp3971->num_regulators; i++)
+		if (lp3971->rdev[i])
+			regulator_unregister(lp3971->rdev[i]);
+	kfree(lp3971->rdev);
+	i2c_set_clientdata(i2c, NULL);
+	kfree(lp3971);
+
+	return 0;
+}
+
+static const struct i2c_device_id lp3971_i2c_id[] = {
+       { "lp3971", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id);
+
+static struct i2c_driver lp3971_i2c_driver = {
+	.driver = {
+		.name = "LP3971",
+		.owner = THIS_MODULE,
+	},
+	.probe    = lp3971_i2c_probe,
+	.remove   = __devexit_p(lp3971_i2c_remove),
+	.id_table = lp3971_i2c_id,
+};
+
+static int __init lp3971_module_init(void)
+{
+	int ret = -ENODEV;
+
+	ret = i2c_add_driver(&lp3971_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register I2C driver: %d\n", ret);
+
+	return ret;
+}
+module_init(lp3971_module_init);
+
+static void __exit lp3971_module_exit(void)
+{
+	i2c_del_driver(&lp3971_i2c_driver);
+}
+module_exit(lp3971_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>");
+MODULE_DESCRIPTION("LP3971 PMIC driver");
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
new file mode 100644
index 00000000000..2c082d3ef48
--- /dev/null
+++ b/drivers/regulator/max1586.c
@@ -0,0 +1,282 @@
+/*
+ * max1586.c  --  Voltage and current regulation for the Maxim 1586
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/max1586.h>
+
+#define MAX1586_V3_MAX_VSEL 31
+#define MAX1586_V6_MAX_VSEL 3
+
+#define MAX1586_V3_MIN_UV   700000
+#define MAX1586_V3_MAX_UV  1475000
+
+#define MAX1586_V6_MIN_UV        0
+#define MAX1586_V6_MAX_UV  3000000
+
+#define I2C_V3_SELECT (0 << 5)
+#define I2C_V6_SELECT (1 << 5)
+
+struct max1586_data {
+	struct i2c_client *client;
+
+	/* min/max V3 voltage */
+	unsigned int min_uV;
+	unsigned int max_uV;
+
+	struct regulator_dev *rdev[0];
+};
+
+/*
+ * V3 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ *   set V3 to 0.700V + (x & 0x1f) * 0.025V
+ * This voltage can be increased by external resistors
+ * R24 and R25=100kOhm as described in the data sheet.
+ * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
+ */
+static int max1586_v3_calc_voltage(struct max1586_data *max1586,
+	unsigned selector)
+{
+	unsigned range_uV = max1586->max_uV - max1586->min_uV;
+
+	return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
+}
+
+static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+	struct i2c_client *client = max1586->client;
+	unsigned range_uV = max1586->max_uV - max1586->min_uV;
+	unsigned selector;
+	u8 v3_prog;
+
+	if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
+		return -EINVAL;
+	if (min_uV < max1586->min_uV)
+		min_uV = max1586->min_uV;
+
+	selector = ((min_uV - max1586->min_uV) * MAX1586_V3_MAX_VSEL +
+			range_uV - 1) / range_uV;
+	if (max1586_v3_calc_voltage(max1586, selector) > max_uV)
+		return -EINVAL;
+
+	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
+		max1586_v3_calc_voltage(max1586, selector) / 1000);
+
+	v3_prog = I2C_V3_SELECT | (u8) selector;
+	return i2c_smbus_write_byte(client, v3_prog);
+}
+
+static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+	if (selector > MAX1586_V3_MAX_VSEL)
+		return -EINVAL;
+	return max1586_v3_calc_voltage(max1586, selector);
+}
+
+/*
+ * V6 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ *   set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
+ * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
+ */
+static int max1586_v6_calc_voltage(unsigned selector)
+{
+	static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
+
+	return voltages_uv[selector];
+}
+
+static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+	struct i2c_client *client = rdev_get_drvdata(rdev);
+	unsigned selector;
+	u8 v6_prog;
+
+	if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV)
+		return -EINVAL;
+	if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
+		return -EINVAL;
+
+	if (min_uV >= 3000000)
+		selector = 3;
+	if (min_uV < 3000000)
+		selector = 2;
+	if (min_uV < 2500000)
+		selector = 1;
+	if (min_uV < 1800000)
+		selector = 0;
+
+	if (max1586_v6_calc_voltage(selector) > max_uV)
+		return -EINVAL;
+
+	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
+		max1586_v6_calc_voltage(selector) / 1000);
+
+	v6_prog = I2C_V6_SELECT | (u8) selector;
+	return i2c_smbus_write_byte(client, v6_prog);
+}
+
+static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector)
+{
+	if (selector > MAX1586_V6_MAX_VSEL)
+		return -EINVAL;
+	return max1586_v6_calc_voltage(selector);
+}
+
+/*
+ * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
+ * the set up value.
+ */
+static struct regulator_ops max1586_v3_ops = {
+	.set_voltage = max1586_v3_set,
+	.list_voltage = max1586_v3_list,
+};
+
+static struct regulator_ops max1586_v6_ops = {
+	.set_voltage = max1586_v6_set,
+	.list_voltage = max1586_v6_list,
+};
+
+static struct regulator_desc max1586_reg[] = {
+	{
+		.name = "Output_V3",
+		.id = MAX1586_V3,
+		.ops = &max1586_v3_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX1586_V3_MAX_VSEL + 1,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "Output_V6",
+		.id = MAX1586_V6,
+		.ops = &max1586_v6_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = MAX1586_V6_MAX_VSEL + 1,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int max1586_pmic_probe(struct i2c_client *client,
+			      const struct i2c_device_id *i2c_id)
+{
+	struct regulator_dev **rdev;
+	struct max1586_platform_data *pdata = client->dev.platform_data;
+	struct max1586_data *max1586;
+	int i, id, ret = -ENOMEM;
+
+	max1586 = kzalloc(sizeof(struct max1586_data) +
+			sizeof(struct regulator_dev *) * (MAX1586_V6 + 1),
+			GFP_KERNEL);
+	if (!max1586)
+		goto out;
+
+	max1586->client = client;
+
+	if (!pdata->v3_gain) {
+		ret = -EINVAL;
+		goto out_unmap;
+	}
+	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
+	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
+
+	rdev = max1586->rdev;
+	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
+		id = pdata->subdevs[i].id;
+		if (!pdata->subdevs[i].platform_data)
+			continue;
+		if (id < MAX1586_V3 || id > MAX1586_V6) {
+			dev_err(&client->dev, "invalid regulator id %d\n", id);
+			goto err;
+		}
+		rdev[i] = regulator_register(&max1586_reg[id], &client->dev,
+					     pdata->subdevs[i].platform_data,
+					     max1586);
+		if (IS_ERR(rdev[i])) {
+			ret = PTR_ERR(rdev[i]);
+			dev_err(&client->dev, "failed to register %s\n",
+				max1586_reg[id].name);
+			goto err;
+		}
+	}
+
+	i2c_set_clientdata(client, rdev);
+	dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
+	return 0;
+
+err:
+	while (--i >= 0)
+		regulator_unregister(rdev[i]);
+out_unmap:
+	kfree(max1586);
+out:
+	return ret;
+}
+
+static int max1586_pmic_remove(struct i2c_client *client)
+{
+	struct regulator_dev **rdev = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i <= MAX1586_V6; i++)
+		if (rdev[i])
+			regulator_unregister(rdev[i]);
+	kfree(rdev);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+static const struct i2c_device_id max1586_id[] = {
+	{ "max1586", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max1586_id);
+
+static struct i2c_driver max1586_pmic_driver = {
+	.probe = max1586_pmic_probe,
+	.remove = max1586_pmic_remove,
+	.driver		= {
+		.name	= "max1586",
+	},
+	.id_table	= max1586_id,
+};
+
+static int __init max1586_pmic_init(void)
+{
+	return i2c_add_driver(&max1586_pmic_driver);
+}
+subsys_initcall(max1586_pmic_init);
+
+static void __exit max1586_pmic_exit(void)
+{
+	i2c_del_driver(&max1586_pmic_driver);
+}
+module_exit(max1586_pmic_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
+MODULE_AUTHOR("Robert Jarzmik");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index cd761d85c8f..8e14900eb68 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -316,7 +316,7 @@ static int __init pcf50633_regulator_init(void)
 {
 	return platform_driver_register(&pcf50633_regulator_driver);
 }
-module_init(pcf50633_regulator_init);
+subsys_initcall(pcf50633_regulator_init);
 
 static void __exit pcf50633_regulator_exit(void)
 {
diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
new file mode 100644
index 00000000000..06d2fa96a8b
--- /dev/null
+++ b/drivers/regulator/userspace-consumer.c
@@ -0,0 +1,200 @@
+/*
+ * userspace-consumer.c
+ *
+ * Copyright 2009 CompuLab, Ltd.
+ *
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based of virtual consumer driver:
+ *   Copyright 2008 Wolfson Microelectronics PLC.
+ *   Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/userspace-consumer.h>
+
+struct userspace_consumer_data {
+	const char *name;
+
+	struct mutex lock;
+	bool enabled;
+
+	int num_supplies;
+	struct regulator_bulk_data *supplies;
+};
+
+static ssize_t reg_show_name(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct userspace_consumer_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", data->name);
+}
+
+static ssize_t reg_show_state(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct userspace_consumer_data *data = dev_get_drvdata(dev);
+
+	if (data->enabled)
+		return sprintf(buf, "enabled\n");
+
+	return sprintf(buf, "disabled\n");
+}
+
+static ssize_t reg_set_state(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct userspace_consumer_data *data = dev_get_drvdata(dev);
+	bool enabled;
+	int ret;
+
+	/*
+	 * sysfs_streq() doesn't need the \n's, but we add them so the strings
+	 * will be shared with show_state(), above.
+	 */
+	if (sysfs_streq(buf, "enabled\n") || sysfs_streq(buf, "1"))
+		enabled = true;
+	else if (sysfs_streq(buf, "disabled\n") || sysfs_streq(buf, "0"))
+		enabled = false;
+	else {
+		dev_err(dev, "Configuring invalid mode\n");
+		return count;
+	}
+
+	mutex_lock(&data->lock);
+	if (enabled != data->enabled) {
+		if (enabled)
+			ret = regulator_bulk_enable(data->num_supplies,
+						    data->supplies);
+		else
+			ret = regulator_bulk_disable(data->num_supplies,
+						     data->supplies);
+
+		if (ret == 0)
+			data->enabled = enabled;
+		else
+			dev_err(dev, "Failed to configure state: %d\n", ret);
+	}
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(name, 0444, reg_show_name, NULL);
+static DEVICE_ATTR(state, 0644, reg_show_state, reg_set_state);
+
+static struct device_attribute *attributes[] = {
+	&dev_attr_name,
+	&dev_attr_state,
+};
+
+static int regulator_userspace_consumer_probe(struct platform_device *pdev)
+{
+	struct regulator_userspace_consumer_data *pdata;
+	struct userspace_consumer_data *drvdata;
+	int ret, i;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return -EINVAL;
+
+	drvdata = kzalloc(sizeof(struct userspace_consumer_data), GFP_KERNEL);
+	if (drvdata == NULL)
+		return -ENOMEM;
+
+	drvdata->name = pdata->name;
+	drvdata->num_supplies = pdata->num_supplies;
+	drvdata->supplies = pdata->supplies;
+
+	mutex_init(&drvdata->lock);
+
+	ret = regulator_bulk_get(&pdev->dev, drvdata->num_supplies,
+				 drvdata->supplies);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get supplies: %d\n", ret);
+		goto err_alloc_supplies;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(attributes); i++) {
+		ret = device_create_file(&pdev->dev, attributes[i]);
+		if (ret != 0)
+			goto err_create_attrs;
+	}
+
+	if (pdata->init_on)
+		ret = regulator_bulk_enable(drvdata->num_supplies,
+					    drvdata->supplies);
+
+	drvdata->enabled = pdata->init_on;
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to set initial state: %d\n", ret);
+		goto err_create_attrs;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+
+err_create_attrs:
+	for (i = 0; i < ARRAY_SIZE(attributes); i++)
+		device_remove_file(&pdev->dev, attributes[i]);
+
+	regulator_bulk_free(drvdata->num_supplies, drvdata->supplies);
+
+err_alloc_supplies:
+	kfree(drvdata);
+	return ret;
+}
+
+static int regulator_userspace_consumer_remove(struct platform_device *pdev)
+{
+	struct userspace_consumer_data *data = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(attributes); i++)
+		device_remove_file(&pdev->dev, attributes[i]);
+
+	if (data->enabled)
+		regulator_bulk_disable(data->num_supplies, data->supplies);
+
+	regulator_bulk_free(data->num_supplies, data->supplies);
+	kfree(data);
+
+	return 0;
+}
+
+static struct platform_driver regulator_userspace_consumer_driver = {
+	.probe		= regulator_userspace_consumer_probe,
+	.remove		= regulator_userspace_consumer_remove,
+	.driver		= {
+		.name		= "reg-userspace-consumer",
+	},
+};
+
+
+static int __init regulator_userspace_consumer_init(void)
+{
+	return platform_driver_register(&regulator_userspace_consumer_driver);
+}
+module_init(regulator_userspace_consumer_init);
+
+static void __exit regulator_userspace_consumer_exit(void)
+{
+	platform_driver_unregister(&regulator_userspace_consumer_driver);
+}
+module_exit(regulator_userspace_consumer_exit);
+
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("Userspace consumer for voltage and current regulators");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index 71403fa3ffa..e7db5664722 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -347,3 +347,4 @@ module_exit(regulator_virtual_consumer_exit);
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Virtual regulator consumer");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:reg-virt-consumer");
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 771eca1066b..17a00b0fafd 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1570,3 +1570,4 @@ module_exit(wm8350_regulator_exit);
 MODULE_AUTHOR("Liam Girdwood");
 MODULE_DESCRIPTION("WM8350 voltage and current regulator driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-regulator");
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index 15742602907..d9a2c988c6e 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -320,7 +320,7 @@ static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
 	struct regulator_dev *rdev;
 
 	rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
-		pdev->dev.platform_data, pdev->dev.driver_data);
+		pdev->dev.platform_data, dev_get_drvdata(&pdev->dev));
 
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
@@ -359,7 +359,7 @@ static struct platform_driver wm8400_regulator_driver = {
 int wm8400_register_regulator(struct device *dev, int reg,
 			      struct regulator_init_data *initdata)
 {
-	struct wm8400 *wm8400 = dev->driver_data;
+	struct wm8400 *wm8400 = dev_get_drvdata(dev);
 
 	if (wm8400->regulators[reg].name)
 		return -EBUSY;
@@ -369,8 +369,8 @@ int wm8400_register_regulator(struct device *dev, int reg,
 	wm8400->regulators[reg].name = "wm8400-regulator";
 	wm8400->regulators[reg].id = reg;
 	wm8400->regulators[reg].dev.parent = dev;
-	wm8400->regulators[reg].dev.driver_data = wm8400;
 	wm8400->regulators[reg].dev.platform_data = initdata;
+	dev_set_drvdata(&wm8400->regulators[reg].dev, wm8400);
 
 	return platform_device_register(&wm8400->regulators[reg]);
 }
@@ -380,7 +380,7 @@ static int __init wm8400_regulator_init(void)
 {
 	return platform_driver_register(&wm8400_regulator_driver);
 }
-module_init(wm8400_regulator_init);
+subsys_initcall(wm8400_regulator_init);
 
 static void __exit wm8400_regulator_exit(void)
 {
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index f7a3283dd02..551332e4ed0 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,32 +12,56 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
+
+#define EP93XX_RTC_DATA			0x000
+#define EP93XX_RTC_MATCH		0x004
+#define EP93XX_RTC_STATUS		0x008
+#define  EP93XX_RTC_STATUS_INTR		 (1<<0)
+#define EP93XX_RTC_LOAD			0x00C
+#define EP93XX_RTC_CONTROL		0x010
+#define  EP93XX_RTC_CONTROL_MIE		 (1<<0)
+#define EP93XX_RTC_SWCOMP		0x108
+#define  EP93XX_RTC_SWCOMP_DEL_MASK	 0x001f0000
+#define  EP93XX_RTC_SWCOMP_DEL_SHIFT	 16
+#define  EP93XX_RTC_SWCOMP_INT_MASK	 0x0000ffff
+#define  EP93XX_RTC_SWCOMP_INT_SHIFT	 0
+
+#define DRV_VERSION "0.3"
 
-#define EP93XX_RTC_REG(x)	(EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA		EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD		EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP	EP93XX_RTC_REG(0x0108)
-
-#define DRV_VERSION "0.2"
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+	void __iomem	*mmio_base;
+};
 
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
 				unsigned short *delete)
 {
-	unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+	unsigned long comp;
+
+	comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
 
 	if (preload)
-		*preload = comp & 0xffff;
+		*preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+				>> EP93XX_RTC_SWCOMP_INT_SHIFT;
 
 	if (delete)
-		*delete = (comp >> 16) & 0x1f;
+		*delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+				>> EP93XX_RTC_SWCOMP_DEL_SHIFT;
 
 	return 0;
 }
 
 static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+	unsigned long time;
+
+	 time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
 
 	rtc_time_to_tm(time, tm);
 	return 0;
@@ -45,7 +69,9 @@ static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
 {
-	__raw_writel(secs + 1, EP93XX_RTC_LOAD);
+	struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+	__raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
 	return 0;
 }
 
@@ -53,7 +79,7 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	unsigned short preload, delete;
 
-	ep93xx_get_swcomp(dev, &preload, &delete);
+	ep93xx_rtc_get_swcomp(dev, &preload, &delete);
 
 	seq_printf(seq, "preload\t\t: %d\n", preload);
 	seq_printf(seq, "delete\t\t: %d\n", delete);
@@ -67,54 +93,104 @@ static const struct rtc_class_ops ep93xx_rtc_ops = {
 	.proc		= ep93xx_rtc_proc,
 };
 
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	unsigned short preload;
 
-	ep93xx_get_swcomp(dev, &preload, NULL);
+	ep93xx_rtc_get_swcomp(dev, &preload, NULL);
 
 	return sprintf(buf, "%d\n", preload);
 }
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
 
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	unsigned short delete;
 
-	ep93xx_get_swcomp(dev, NULL, &delete);
+	ep93xx_rtc_get_swcomp(dev, NULL, &delete);
 
 	return sprintf(buf, "%d\n", delete);
 }
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
 
 
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = rtc_device_register("ep93xx",
-				&dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+	struct ep93xx_rtc *ep93xx_rtc;
+	struct resource *res;
+	struct rtc_device *rtc;
+	int err;
+
+	ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+	if (ep93xx_rtc == NULL)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL)
+		return -ENXIO;
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (res == NULL)
+		return -EBUSY;
+
+	ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+	if (ep93xx_rtc->mmio_base == NULL) {
+		err = -ENXIO;
+		goto fail;
+	}
 
+	pdev->dev.platform_data = ep93xx_rtc;
+
+	rtc = rtc_device_register(pdev->name,
+				&pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
-		return PTR_ERR(rtc);
+		err = PTR_ERR(rtc);
+		goto fail;
 	}
 
-	platform_set_drvdata(dev, rtc);
+	platform_set_drvdata(pdev, rtc);
 
-	device_create_file(&dev->dev, &dev_attr_comp_preload);
-	device_create_file(&dev->dev, &dev_attr_comp_delete);
+	err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+	if (err)
+		goto fail;
+	err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+	if (err) {
+		device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+		goto fail;
+	}
 
 	return 0;
+
+fail:
+	if (ep93xx_rtc->mmio_base) {
+		iounmap(ep93xx_rtc->mmio_base);
+		pdev->dev.platform_data = NULL;
+	}
+	release_mem_region(res->start, resource_size(res));
+	return err;
 }
 
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = platform_get_drvdata(dev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+	struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+	struct resource *res;
+
+	/* cleanup sysfs */
+	device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+	device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+
+	rtc_device_unregister(rtc);
+
+	iounmap(ep93xx_rtc->mmio_base);
+	pdev->dev.platform_data = NULL;
 
- 	if (rtc)
-		rtc_device_unregister(rtc);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(dev, NULL);
+	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
@@ -122,23 +198,22 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:ep93xx-rtc");
 
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
 	.driver		= {
 		.name	= "ep93xx-rtc",
 		.owner	= THIS_MODULE,
 	},
-	.probe		= ep93xx_rtc_probe,
-	.remove		= __devexit_p(ep93xx_rtc_remove),
+	.remove		= __exit_p(ep93xx_rtc_remove),
 };
 
 static int __init ep93xx_rtc_init(void)
 {
-	return platform_driver_register(&ep93xx_rtc_platform_driver);
+        return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
 }
 
 static void __exit ep93xx_rtc_exit(void)
 {
-	platform_driver_unregister(&ep93xx_rtc_platform_driver);
+	platform_driver_unregister(&ep93xx_rtc_driver);
 }
 
 MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index aaf1f75fa29..457231bb102 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -117,7 +117,7 @@ static int pl030_probe(struct amba_device *dev, struct amba_id *id)
 		goto err_rtc;
 	}
 
-	rtc->base = ioremap(dev->res.start, SZ_4K);
+	rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!rtc->base) {
 		ret = -ENOMEM;
 		goto err_map;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 451fc13784d..f41873f98f6 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -142,8 +142,7 @@ static int pl031_probe(struct amba_device *adev, struct amba_id *id)
 		goto out;
 	}
 
-	ldata->base = ioremap(adev->res.start,
-			      adev->res.end - adev->res.start + 1);
+	ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
 	if (!ldata->base) {
 		ret = -ENOMEM;
 		goto out_no_remap;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 442bb98a282..e5b84db0aa0 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -5,8 +5,7 @@
  *		    Carsten Otte <Cotte@de.ibm.com>
  *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
- *
+ * Copyright IBM Corp. 1999, 2009
  */
 
 #define KMSG_COMPONENT "dasd"
@@ -61,6 +60,7 @@ static int dasd_flush_block_queue(struct dasd_block *);
 static void dasd_device_tasklet(struct dasd_device *);
 static void dasd_block_tasklet(struct dasd_block *);
 static void do_kick_device(struct work_struct *);
+static void do_restore_device(struct work_struct *);
 static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *);
 static void dasd_device_timeout(unsigned long);
 static void dasd_block_timeout(unsigned long);
@@ -109,6 +109,7 @@ struct dasd_device *dasd_alloc_device(void)
 	device->timer.function = dasd_device_timeout;
 	device->timer.data = (unsigned long) device;
 	INIT_WORK(&device->kick_work, do_kick_device);
+	INIT_WORK(&device->restore_device, do_restore_device);
 	device->state = DASD_STATE_NEW;
 	device->target = DASD_STATE_NEW;
 
@@ -512,6 +513,25 @@ void dasd_kick_device(struct dasd_device *device)
 }
 
 /*
+ * dasd_restore_device will schedule a call do do_restore_device to the kernel
+ * event daemon.
+ */
+static void do_restore_device(struct work_struct *work)
+{
+	struct dasd_device *device = container_of(work, struct dasd_device,
+						  restore_device);
+	device->cdev->drv->restore(device->cdev);
+	dasd_put_device(device);
+}
+
+void dasd_restore_device(struct dasd_device *device)
+{
+	dasd_get_device(device);
+	/* queue call to dasd_restore_device to the kernel event daemon. */
+	schedule_work(&device->restore_device);
+}
+
+/*
  * Set the target state for a device and starts the state change.
  */
 void dasd_set_target_state(struct dasd_device *device, int target)
@@ -908,6 +928,12 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
 			      "start_IO: -EIO device gone, retry");
 		break;
+	case -EINVAL:
+		/* most likely caused in power management context */
+		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
+			      "start_IO: -EINVAL device currently "
+			      "not accessible");
+		break;
 	default:
 		/* internal error 11 - unknown rc */
 		snprintf(errorstring, ERRORLENGTH, "11 %d", rc);
@@ -2400,6 +2426,12 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 	case CIO_OPER:
 		/* FIXME: add a sanity check. */
 		device->stopped &= ~DASD_STOPPED_DC_WAIT;
+		if (device->stopped & DASD_UNRESUMED_PM) {
+			device->stopped &= ~DASD_UNRESUMED_PM;
+			dasd_restore_device(device);
+			ret = 1;
+			break;
+		}
 		dasd_schedule_device_bh(device);
 		if (device->block)
 			dasd_schedule_block_bh(device->block);
@@ -2410,6 +2442,79 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 	return ret;
 }
 
+int dasd_generic_pm_freeze(struct ccw_device *cdev)
+{
+	struct dasd_ccw_req *cqr, *n;
+	int rc;
+	struct list_head freeze_queue;
+	struct dasd_device *device = dasd_device_from_cdev(cdev);
+
+	if (IS_ERR(device))
+		return PTR_ERR(device);
+	/* disallow new I/O  */
+	device->stopped |= DASD_STOPPED_PM;
+	/* clear active requests */
+	INIT_LIST_HEAD(&freeze_queue);
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	rc = 0;
+	list_for_each_entry_safe(cqr, n, &device->ccw_queue, devlist) {
+		/* Check status and move request to flush_queue */
+		if (cqr->status == DASD_CQR_IN_IO) {
+			rc = device->discipline->term_IO(cqr);
+			if (rc) {
+				/* unable to terminate requeust */
+				dev_err(&device->cdev->dev,
+					"Unable to terminate request %p "
+					"on suspend\n", cqr);
+				spin_unlock_irq(get_ccwdev_lock(cdev));
+				dasd_put_device(device);
+				return rc;
+			}
+		}
+		list_move_tail(&cqr->devlist, &freeze_queue);
+	}
+
+	spin_unlock_irq(get_ccwdev_lock(cdev));
+
+	list_for_each_entry_safe(cqr, n, &freeze_queue, devlist) {
+		wait_event(dasd_flush_wq,
+			   (cqr->status != DASD_CQR_CLEAR_PENDING));
+		if (cqr->status == DASD_CQR_CLEARED)
+			cqr->status = DASD_CQR_QUEUED;
+	}
+	/* move freeze_queue to start of the ccw_queue */
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	list_splice_tail(&freeze_queue, &device->ccw_queue);
+	spin_unlock_irq(get_ccwdev_lock(cdev));
+
+	if (device->discipline->freeze)
+		rc = device->discipline->freeze(device);
+
+	dasd_put_device(device);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(dasd_generic_pm_freeze);
+
+int dasd_generic_restore_device(struct ccw_device *cdev)
+{
+	struct dasd_device *device = dasd_device_from_cdev(cdev);
+	int rc = 0;
+
+	if (IS_ERR(device))
+		return PTR_ERR(device);
+
+	dasd_schedule_device_bh(device);
+	if (device->block)
+		dasd_schedule_block_bh(device->block);
+
+	if (device->discipline->restore)
+		rc = device->discipline->restore(device);
+
+	dasd_put_device(device);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(dasd_generic_restore_device);
+
 static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
 						   void *rdc_buffer,
 						   int rdc_buffer_size,
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index e77666c8e6c..4cac5b54f26 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -1098,6 +1098,7 @@ dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid)
 	spin_unlock(&dasd_devmap_lock);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dasd_get_uid);
 
 /*
  * Register the given device unique identifier into devmap struct.
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index cf0cfdba124..1c28ec3e4cc 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -5,10 +5,9 @@
  *		    Carsten Otte <Cotte@de.ibm.com>
  *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ * Copyright IBM Corp. 1999, 2009
  * EMC Symmetrix ioctl Copyright EMC Corporation, 2008
  * Author.........: Nigel Hislop <hislop_nigel@emc.com>
- *
  */
 
 #define KMSG_COMPONENT "dasd"
@@ -104,17 +103,6 @@ dasd_eckd_set_online(struct ccw_device *cdev)
 	return dasd_generic_set_online(cdev, &dasd_eckd_discipline);
 }
 
-static struct ccw_driver dasd_eckd_driver = {
-	.name        = "dasd-eckd",
-	.owner       = THIS_MODULE,
-	.ids         = dasd_eckd_ids,
-	.probe       = dasd_eckd_probe,
-	.remove      = dasd_generic_remove,
-	.set_offline = dasd_generic_set_offline,
-	.set_online  = dasd_eckd_set_online,
-	.notify      = dasd_generic_notify,
-};
-
 static const int sizes_trk0[] = { 28, 148, 84 };
 #define LABEL_SIZE 140
 
@@ -3236,6 +3224,98 @@ static void dasd_eckd_dump_sense(struct dasd_device *device,
 		dasd_eckd_dump_sense_ccw(device, req, irb);
 }
 
+int dasd_eckd_pm_freeze(struct dasd_device *device)
+{
+	/*
+	 * the device should be disconnected from our LCU structure
+	 * on restore we will reconnect it and reread LCU specific
+	 * information like PAV support that might have changed
+	 */
+	dasd_alias_remove_device(device);
+	dasd_alias_disconnect_device_from_lcu(device);
+
+	return 0;
+}
+
+int dasd_eckd_restore_device(struct dasd_device *device)
+{
+	struct dasd_eckd_private *private;
+	int is_known, rc;
+	struct dasd_uid temp_uid;
+
+	/* allow new IO again */
+	device->stopped &= ~DASD_STOPPED_PM;
+
+	private = (struct dasd_eckd_private *) device->private;
+
+	/* Read Configuration Data */
+	rc = dasd_eckd_read_conf(device);
+	if (rc)
+		goto out_err;
+
+	/* Generate device unique id and register in devmap */
+	rc = dasd_eckd_generate_uid(device, &private->uid);
+	dasd_get_uid(device->cdev, &temp_uid);
+	if (memcmp(&private->uid, &temp_uid, sizeof(struct dasd_uid)) != 0)
+		dev_err(&device->cdev->dev, "The UID of the DASD has changed\n");
+	if (rc)
+		goto out_err;
+	dasd_set_uid(device->cdev, &private->uid);
+
+	/* register lcu with alias handling, enable PAV if this is a new lcu */
+	is_known = dasd_alias_make_device_known_to_lcu(device);
+	if (is_known < 0)
+		return is_known;
+	if (!is_known) {
+		/* new lcu found */
+		rc = dasd_eckd_validate_server(device); /* will switch pav on */
+		if (rc)
+			goto out_err;
+	}
+
+	/* Read Feature Codes */
+	rc = dasd_eckd_read_features(device);
+	if (rc)
+		goto out_err;
+
+	/* Read Device Characteristics */
+	memset(&private->rdc_data, 0, sizeof(private->rdc_data));
+	rc = dasd_generic_read_dev_chars(device, "ECKD",
+					 &private->rdc_data, 64);
+	if (rc) {
+		DBF_EVENT(DBF_WARNING,
+			  "Read device characteristics failed, rc=%d for "
+			  "device: %s", rc, dev_name(&device->cdev->dev));
+		goto out_err;
+	}
+
+	/* add device to alias management */
+	dasd_alias_add_device(device);
+
+	return 0;
+
+out_err:
+	/*
+	 * if the resume failed for the DASD we put it in
+	 * an UNRESUMED stop state
+	 */
+	device->stopped |= DASD_UNRESUMED_PM;
+	return 0;
+}
+
+static struct ccw_driver dasd_eckd_driver = {
+	.name	     = "dasd-eckd",
+	.owner	     = THIS_MODULE,
+	.ids	     = dasd_eckd_ids,
+	.probe	     = dasd_eckd_probe,
+	.remove      = dasd_generic_remove,
+	.set_offline = dasd_generic_set_offline,
+	.set_online  = dasd_eckd_set_online,
+	.notify      = dasd_generic_notify,
+	.freeze      = dasd_generic_pm_freeze,
+	.thaw	     = dasd_generic_restore_device,
+	.restore     = dasd_generic_restore_device,
+};
 
 /*
  * max_blocks is dependent on the amount of storage that is available
@@ -3274,6 +3354,8 @@ static struct dasd_discipline dasd_eckd_discipline = {
 	.dump_sense_dbf = dasd_eckd_dump_sense_dbf,
 	.fill_info = dasd_eckd_fill_info,
 	.ioctl = dasd_eckd_ioctl,
+	.freeze = dasd_eckd_pm_freeze,
+	.restore = dasd_eckd_restore_device,
 };
 
 static int __init
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 597c6ffdb9f..e21ee735f92 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -2,8 +2,7 @@
  * File...........: linux/drivers/s390/block/dasd_fba.c
  * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
- *
+ * Copyright IBM Corp. 1999, 2009
  */
 
 #define KMSG_COMPONENT "dasd"
@@ -75,6 +74,9 @@ static struct ccw_driver dasd_fba_driver = {
 	.set_offline = dasd_generic_set_offline,
 	.set_online  = dasd_fba_set_online,
 	.notify      = dasd_generic_notify,
+	.freeze      = dasd_generic_pm_freeze,
+	.thaw	     = dasd_generic_restore_device,
+	.restore     = dasd_generic_restore_device,
 };
 
 static void
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index f97ceb79507..fd63b2f2bda 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -4,8 +4,7 @@
  *		    Horst Hummel <Horst.Hummel@de.ibm.com>
  *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
  * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
- *
+ * Copyright IBM Corp. 1999, 2009
  */
 
 #ifndef DASD_INT_H
@@ -295,6 +294,10 @@ struct dasd_discipline {
 	int (*fill_geometry) (struct dasd_block *, struct hd_geometry *);
 	int (*fill_info) (struct dasd_device *, struct dasd_information2_t *);
 	int (*ioctl) (struct dasd_block *, unsigned int, void __user *);
+
+	/* suspend/resume functions */
+	int (*freeze) (struct dasd_device *);
+	int (*restore) (struct dasd_device *);
 };
 
 extern struct dasd_discipline *dasd_diag_discipline_pointer;
@@ -367,6 +370,7 @@ struct dasd_device {
 	atomic_t tasklet_scheduled;
         struct tasklet_struct tasklet;
 	struct work_struct kick_work;
+	struct work_struct restore_device;
 	struct timer_list timer;
 
 	debug_info_t *debug_area;
@@ -410,6 +414,8 @@ struct dasd_block {
 #define DASD_STOPPED_PENDING 4         /* long busy */
 #define DASD_STOPPED_DC_WAIT 8         /* disconnected, wait */
 #define DASD_STOPPED_SU      16        /* summary unit check handling */
+#define DASD_STOPPED_PM      32        /* pm state transition */
+#define DASD_UNRESUMED_PM    64        /* pm resume failed state */
 
 /* per device flags */
 #define DASD_FLAG_OFFLINE	3	/* device is in offline processing */
@@ -556,6 +562,7 @@ void dasd_free_block(struct dasd_block *);
 void dasd_enable_device(struct dasd_device *);
 void dasd_set_target_state(struct dasd_device *, int);
 void dasd_kick_device(struct dasd_device *);
+void dasd_restore_device(struct dasd_device *);
 
 void dasd_add_request_head(struct dasd_ccw_req *);
 void dasd_add_request_tail(struct dasd_ccw_req *);
@@ -578,6 +585,8 @@ int dasd_generic_set_online(struct ccw_device *, struct dasd_discipline *);
 int dasd_generic_set_offline (struct ccw_device *cdev);
 int dasd_generic_notify(struct ccw_device *, int);
 void dasd_generic_handle_state_change(struct dasd_device *);
+int dasd_generic_pm_freeze(struct ccw_device *);
+int dasd_generic_restore_device(struct ccw_device *);
 
 int dasd_generic_read_dev_chars(struct dasd_device *, char *, void *, int);
 char *dasd_get_sense(struct irb *);
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index b21caf177e3..016f9e9d259 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -14,10 +14,11 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
-#include <asm/extmem.h>
-#include <asm/io.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/extmem.h>
+#include <asm/io.h>
 
 #define DCSSBLK_NAME "dcssblk"
 #define DCSSBLK_MINORS_PER_DISK 1
@@ -940,11 +941,94 @@ dcssblk_check_params(void)
 }
 
 /*
+ * Suspend / Resume
+ */
+static int dcssblk_freeze(struct device *dev)
+{
+	struct dcssblk_dev_info *dev_info;
+	int rc = 0;
+
+	list_for_each_entry(dev_info, &dcssblk_devices, lh) {
+		switch (dev_info->segment_type) {
+			case SEG_TYPE_SR:
+			case SEG_TYPE_ER:
+			case SEG_TYPE_SC:
+				if (!dev_info->is_shared)
+					rc = -EINVAL;
+				break;
+			default:
+				rc = -EINVAL;
+				break;
+		}
+		if (rc)
+			break;
+	}
+	if (rc)
+		pr_err("Suspend failed because device %s is writeable.\n",
+		       dev_info->segment_name);
+	return rc;
+}
+
+static int dcssblk_restore(struct device *dev)
+{
+	struct dcssblk_dev_info *dev_info;
+	struct segment_info *entry;
+	unsigned long start, end;
+	int rc = 0;
+
+	list_for_each_entry(dev_info, &dcssblk_devices, lh) {
+		list_for_each_entry(entry, &dev_info->seg_list, lh) {
+			segment_unload(entry->segment_name);
+			rc = segment_load(entry->segment_name, SEGMENT_SHARED,
+					  &start, &end);
+			if (rc < 0) {
+// TODO in_use check ?
+				segment_warning(rc, entry->segment_name);
+				goto out_panic;
+			}
+			if (start != entry->start || end != entry->end) {
+				pr_err("Mismatch of start / end address after "
+				       "resuming device %s\n",
+				       entry->segment_name);
+				goto out_panic;
+			}
+		}
+	}
+	return 0;
+out_panic:
+	panic("fatal dcssblk resume error\n");
+}
+
+static int dcssblk_thaw(struct device *dev)
+{
+	return 0;
+}
+
+static struct dev_pm_ops dcssblk_pm_ops = {
+	.freeze		= dcssblk_freeze,
+	.thaw		= dcssblk_thaw,
+	.restore	= dcssblk_restore,
+};
+
+static struct platform_driver dcssblk_pdrv = {
+	.driver = {
+		.name	= "dcssblk",
+		.owner	= THIS_MODULE,
+		.pm	= &dcssblk_pm_ops,
+	},
+};
+
+static struct platform_device *dcssblk_pdev;
+
+
+/*
  * The init/exit functions.
  */
 static void __exit
 dcssblk_exit(void)
 {
+	platform_device_unregister(dcssblk_pdev);
+	platform_driver_unregister(&dcssblk_pdrv);
 	root_device_unregister(dcssblk_root_dev);
 	unregister_blkdev(dcssblk_major, DCSSBLK_NAME);
 }
@@ -954,30 +1038,44 @@ dcssblk_init(void)
 {
 	int rc;
 
-	dcssblk_root_dev = root_device_register("dcssblk");
-	if (IS_ERR(dcssblk_root_dev))
-		return PTR_ERR(dcssblk_root_dev);
-	rc = device_create_file(dcssblk_root_dev, &dev_attr_add);
-	if (rc) {
-		root_device_unregister(dcssblk_root_dev);
+	rc = platform_driver_register(&dcssblk_pdrv);
+	if (rc)
 		return rc;
+
+	dcssblk_pdev = platform_device_register_simple("dcssblk", -1, NULL,
+							0);
+	if (IS_ERR(dcssblk_pdev)) {
+		rc = PTR_ERR(dcssblk_pdev);
+		goto out_pdrv;
 	}
-	rc = device_create_file(dcssblk_root_dev, &dev_attr_remove);
-	if (rc) {
-		root_device_unregister(dcssblk_root_dev);
-		return rc;
+
+	dcssblk_root_dev = root_device_register("dcssblk");
+	if (IS_ERR(dcssblk_root_dev)) {
+		rc = PTR_ERR(dcssblk_root_dev);
+		goto out_pdev;
 	}
+	rc = device_create_file(dcssblk_root_dev, &dev_attr_add);
+	if (rc)
+		goto out_root;
+	rc = device_create_file(dcssblk_root_dev, &dev_attr_remove);
+	if (rc)
+		goto out_root;
 	rc = register_blkdev(0, DCSSBLK_NAME);
-	if (rc < 0) {
-		root_device_unregister(dcssblk_root_dev);
-		return rc;
-	}
+	if (rc < 0)
+		goto out_root;
 	dcssblk_major = rc;
 	init_rwsem(&dcssblk_devices_sem);
 
 	dcssblk_check_params();
-
 	return 0;
+
+out_root:
+	root_device_unregister(dcssblk_root_dev);
+out_pdev:
+	platform_device_unregister(dcssblk_pdev);
+out_pdrv:
+	platform_driver_unregister(&dcssblk_pdrv);
+	return rc;
 }
 
 module_init(dcssblk_init);
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 0ae0c83ef87..2e9e1ecd6d8 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -39,7 +39,10 @@
 #include <linux/hdreg.h>  /* HDIO_GETGEO */
 #include <linux/sysdev.h>
 #include <linux/bio.h>
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
 #include <asm/uaccess.h>
+#include <asm/checksum.h>
 
 #define XPRAM_NAME	"xpram"
 #define XPRAM_DEVS	1	/* one partition */
@@ -48,6 +51,7 @@
 typedef struct {
 	unsigned int	size;		/* size of xpram segment in pages */
 	unsigned int	offset;		/* start page of xpram segment */
+	unsigned int	csum;		/* partition checksum for suspend */
 } xpram_device_t;
 
 static xpram_device_t xpram_devices[XPRAM_MAX_DEVS];
@@ -138,7 +142,7 @@ static long xpram_page_out (unsigned long page_addr, unsigned int xpage_index)
 /*
  * Check if xpram is available.
  */
-static int __init xpram_present(void)
+static int xpram_present(void)
 {
 	unsigned long mem_page;
 	int rc;
@@ -154,7 +158,7 @@ static int __init xpram_present(void)
 /*
  * Return index of the last available xpram page.
  */
-static unsigned long __init xpram_highest_page_index(void)
+static unsigned long xpram_highest_page_index(void)
 {
 	unsigned int page_index, add_bit;
 	unsigned long mem_page;
@@ -383,6 +387,106 @@ out:
 }
 
 /*
+ * Save checksums for all partitions.
+ */
+static int xpram_save_checksums(void)
+{
+	unsigned long mem_page;
+	int rc, i;
+
+	rc = 0;
+	mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
+	if (!mem_page)
+		return -ENOMEM;
+	for (i = 0; i < xpram_devs; i++) {
+		rc = xpram_page_in(mem_page, xpram_devices[i].offset);
+		if (rc)
+			goto fail;
+		xpram_devices[i].csum = csum_partial((const void *) mem_page,
+						     PAGE_SIZE, 0);
+	}
+fail:
+	free_page(mem_page);
+	return rc ? -ENXIO : 0;
+}
+
+/*
+ * Verify checksums for all partitions.
+ */
+static int xpram_validate_checksums(void)
+{
+	unsigned long mem_page;
+	unsigned int csum;
+	int rc, i;
+
+	rc = 0;
+	mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
+	if (!mem_page)
+		return -ENOMEM;
+	for (i = 0; i < xpram_devs; i++) {
+		rc = xpram_page_in(mem_page, xpram_devices[i].offset);
+		if (rc)
+			goto fail;
+		csum = csum_partial((const void *) mem_page, PAGE_SIZE, 0);
+		if (xpram_devices[i].csum != csum) {
+			rc = -EINVAL;
+			goto fail;
+		}
+	}
+fail:
+	free_page(mem_page);
+	return rc ? -ENXIO : 0;
+}
+
+/*
+ * Resume failed: Print error message and call panic.
+ */
+static void xpram_resume_error(const char *message)
+{
+	pr_err("Resume error: %s\n", message);
+	panic("xpram resume error\n");
+}
+
+/*
+ * Check if xpram setup changed between suspend and resume.
+ */
+static int xpram_restore(struct device *dev)
+{
+	if (!xpram_pages)
+		return 0;
+	if (xpram_present() != 0)
+		xpram_resume_error("xpram disappeared");
+	if (xpram_pages != xpram_highest_page_index() + 1)
+		xpram_resume_error("Size of xpram changed");
+	if (xpram_validate_checksums())
+		xpram_resume_error("Data of xpram changed");
+	return 0;
+}
+
+/*
+ * Save necessary state in suspend.
+ */
+static int xpram_freeze(struct device *dev)
+{
+	return xpram_save_checksums();
+}
+
+static struct dev_pm_ops xpram_pm_ops = {
+	.freeze		= xpram_freeze,
+	.restore	= xpram_restore,
+};
+
+static struct platform_driver xpram_pdrv = {
+	.driver = {
+		.name	= XPRAM_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &xpram_pm_ops,
+	},
+};
+
+static struct platform_device *xpram_pdev;
+
+/*
  * Finally, the init/exit functions.
  */
 static void __exit xpram_exit(void)
@@ -394,6 +498,8 @@ static void __exit xpram_exit(void)
 		put_disk(xpram_disks[i]);
 	}
 	unregister_blkdev(XPRAM_MAJOR, XPRAM_NAME);
+	platform_device_unregister(xpram_pdev);
+	platform_driver_unregister(&xpram_pdrv);
 }
 
 static int __init xpram_init(void)
@@ -411,7 +517,24 @@ static int __init xpram_init(void)
 	rc = xpram_setup_sizes(xpram_pages);
 	if (rc)
 		return rc;
-	return xpram_setup_blkdev();
+	rc = platform_driver_register(&xpram_pdrv);
+	if (rc)
+		return rc;
+	xpram_pdev = platform_device_register_simple(XPRAM_NAME, -1, NULL, 0);
+	if (IS_ERR(xpram_pdev)) {
+		rc = PTR_ERR(xpram_pdev);
+		goto fail_platform_driver_unregister;
+	}
+	rc = xpram_setup_blkdev();
+	if (rc)
+		goto fail_platform_device_unregister;
+	return 0;
+
+fail_platform_device_unregister:
+	platform_device_unregister(xpram_pdev);
+fail_platform_driver_unregister:
+	platform_driver_unregister(&xpram_pdrv);
+	return rc;
 }
 
 module_init(xpram_init);
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 9ab06e0dad4..04dc734805c 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -1,14 +1,12 @@
 /*
- *  drivers/s390/char/con3215.c
- *    3215 line mode terminal driver.
+ * 3215 line mode terminal driver.
  *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ * Copyright IBM Corp. 1999, 2009
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  *
- *  Updated:
- *   Aug-2000: Added tab support
- *	       Dan Morrison, IBM Corporation (dmorriso@cse.buffalo.edu)
+ * Updated:
+ *  Aug-2000: Added tab support
+ *	      Dan Morrison, IBM Corporation <dmorriso@cse.buffalo.edu>
  */
 
 #include <linux/module.h>
@@ -56,6 +54,7 @@
 #define RAW3215_CLOSING	    32	      /* set while in close process */
 #define RAW3215_TIMER_RUNS  64	      /* set if the output delay timer is on */
 #define RAW3215_FLUSHING    128	      /* set to flush buffer (no delay) */
+#define RAW3215_FROZEN	    256	      /* set if 3215 is frozen for suspend */
 
 #define TAB_STOP_SIZE	    8	      /* tab stop size */
 
@@ -111,8 +110,8 @@ static struct tty_driver *tty3215_driver;
 /*
  * Get a request structure from the free list
  */
-static inline struct raw3215_req *
-raw3215_alloc_req(void) {
+static inline struct raw3215_req *raw3215_alloc_req(void)
+{
 	struct raw3215_req *req;
 	unsigned long flags;
 
@@ -126,8 +125,8 @@ raw3215_alloc_req(void) {
 /*
  * Put a request structure back to the free list
  */
-static inline void
-raw3215_free_req(struct raw3215_req *req) {
+static inline void raw3215_free_req(struct raw3215_req *req)
+{
 	unsigned long flags;
 
 	if (req->type == RAW3215_FREE)
@@ -145,8 +144,7 @@ raw3215_free_req(struct raw3215_req *req) {
  * because a 3215 terminal won't accept a new read before the old one is
  * completed.
  */
-static void
-raw3215_mk_read_req(struct raw3215_info *raw)
+static void raw3215_mk_read_req(struct raw3215_info *raw)
 {
 	struct raw3215_req *req;
 	struct ccw1 *ccw;
@@ -174,8 +172,7 @@ raw3215_mk_read_req(struct raw3215_info *raw)
  * buffer to the 3215 device. If a queued write exists it is replaced by
  * the new, probably lengthened request.
  */
-static void
-raw3215_mk_write_req(struct raw3215_info *raw)
+static void raw3215_mk_write_req(struct raw3215_info *raw)
 {
 	struct raw3215_req *req;
 	struct ccw1 *ccw;
@@ -251,8 +248,7 @@ raw3215_mk_write_req(struct raw3215_info *raw)
 /*
  * Start a read or a write request
  */
-static void
-raw3215_start_io(struct raw3215_info *raw)
+static void raw3215_start_io(struct raw3215_info *raw)
 {
 	struct raw3215_req *req;
 	int res;
@@ -290,8 +286,7 @@ raw3215_start_io(struct raw3215_info *raw)
 /*
  * Function to start a delayed output after RAW3215_TIMEOUT seconds
  */
-static void
-raw3215_timeout(unsigned long __data)
+static void raw3215_timeout(unsigned long __data)
 {
 	struct raw3215_info *raw = (struct raw3215_info *) __data;
 	unsigned long flags;
@@ -300,8 +295,10 @@ raw3215_timeout(unsigned long __data)
 	if (raw->flags & RAW3215_TIMER_RUNS) {
 		del_timer(&raw->timer);
 		raw->flags &= ~RAW3215_TIMER_RUNS;
-		raw3215_mk_write_req(raw);
-		raw3215_start_io(raw);
+		if (!(raw->flags & RAW3215_FROZEN)) {
+			raw3215_mk_write_req(raw);
+			raw3215_start_io(raw);
+		}
 	}
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 }
@@ -312,10 +309,9 @@ raw3215_timeout(unsigned long __data)
  * amount of data is bigger than RAW3215_MIN_WRITE. If a write is not
  * done immediately a timer is started with a delay of RAW3215_TIMEOUT.
  */
-static inline void
-raw3215_try_io(struct raw3215_info *raw)
+static inline void raw3215_try_io(struct raw3215_info *raw)
 {
-	if (!(raw->flags & RAW3215_ACTIVE))
+	if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FROZEN))
 		return;
 	if (raw->queued_read != NULL)
 		raw3215_start_io(raw);
@@ -359,8 +355,8 @@ static void raw3215_next_io(struct raw3215_info *raw)
 /*
  * Interrupt routine, called from common io layer
  */
-static void
-raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
+static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
+			struct irb *irb)
 {
 	struct raw3215_info *raw;
 	struct raw3215_req *req;
@@ -368,7 +364,7 @@ raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	int cstat, dstat;
 	int count;
 
-	raw = cdev->dev.driver_data;
+	raw = dev_get_drvdata(&cdev->dev);
 	req = (struct raw3215_req *) intparm;
 	cstat = irb->scsw.cmd.cstat;
 	dstat = irb->scsw.cmd.dstat;
@@ -459,14 +455,40 @@ raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 }
 
 /*
+ * Drop the oldest line from the output buffer.
+ */
+static void raw3215_drop_line(struct raw3215_info *raw)
+{
+	int ix;
+	char ch;
+
+	BUG_ON(raw->written != 0);
+	ix = (raw->head - raw->count) & (RAW3215_BUFFER_SIZE - 1);
+	while (raw->count > 0) {
+		ch = raw->buffer[ix];
+		ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1);
+		raw->count--;
+		if (ch == 0x15)
+			break;
+	}
+	raw->head = ix;
+}
+
+/*
  * Wait until length bytes are available int the output buffer.
  * Has to be called with the s390irq lock held. Can be called
  * disabled.
  */
-static void
-raw3215_make_room(struct raw3215_info *raw, unsigned int length)
+static void raw3215_make_room(struct raw3215_info *raw, unsigned int length)
 {
 	while (RAW3215_BUFFER_SIZE - raw->count < length) {
+		/* While console is frozen for suspend we have no other
+		 * choice but to drop message from the buffer to make
+		 * room for even more messages. */
+		if (raw->flags & RAW3215_FROZEN) {
+			raw3215_drop_line(raw);
+			continue;
+		}
 		/* there might be a request pending */
 		raw->flags |= RAW3215_FLUSHING;
 		raw3215_mk_write_req(raw);
@@ -488,8 +510,8 @@ raw3215_make_room(struct raw3215_info *raw, unsigned int length)
 /*
  * String write routine for 3215 devices
  */
-static void
-raw3215_write(struct raw3215_info *raw, const char *str, unsigned int length)
+static void raw3215_write(struct raw3215_info *raw, const char *str,
+			  unsigned int length)
 {
 	unsigned long flags;
 	int c, count;
@@ -529,8 +551,7 @@ raw3215_write(struct raw3215_info *raw, const char *str, unsigned int length)
 /*
  * Put character routine for 3215 devices
  */
-static void
-raw3215_putchar(struct raw3215_info *raw, unsigned char ch)
+static void raw3215_putchar(struct raw3215_info *raw, unsigned char ch)
 {
 	unsigned long flags;
 	unsigned int length, i;
@@ -566,8 +587,7 @@ raw3215_putchar(struct raw3215_info *raw, unsigned char ch)
  * Flush routine, it simply sets the flush flag and tries to start
  * pending IO.
  */
-static void
-raw3215_flush_buffer(struct raw3215_info *raw)
+static void raw3215_flush_buffer(struct raw3215_info *raw)
 {
 	unsigned long flags;
 
@@ -583,8 +603,7 @@ raw3215_flush_buffer(struct raw3215_info *raw)
 /*
  * Fire up a 3215 device.
  */
-static int
-raw3215_startup(struct raw3215_info *raw)
+static int raw3215_startup(struct raw3215_info *raw)
 {
 	unsigned long flags;
 
@@ -602,8 +621,7 @@ raw3215_startup(struct raw3215_info *raw)
 /*
  * Shutdown a 3215 device.
  */
-static void
-raw3215_shutdown(struct raw3215_info *raw)
+static void raw3215_shutdown(struct raw3215_info *raw)
 {
 	DECLARE_WAITQUEUE(wait, current);
 	unsigned long flags;
@@ -628,14 +646,13 @@ raw3215_shutdown(struct raw3215_info *raw)
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 }
 
-static int
-raw3215_probe (struct ccw_device *cdev)
+static int raw3215_probe (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
 	int line;
 
 	/* Console is special. */
-	if (raw3215[0] && (cdev->dev.driver_data == raw3215[0]))
+	if (raw3215[0] && (raw3215[0] == dev_get_drvdata(&cdev->dev)))
 		return 0;
 	raw = kmalloc(sizeof(struct raw3215_info) +
 		      RAW3215_INBUF_SIZE, GFP_KERNEL|GFP_DMA);
@@ -669,44 +686,41 @@ raw3215_probe (struct ccw_device *cdev)
 	}
 	init_waitqueue_head(&raw->empty_wait);
 
-	cdev->dev.driver_data = raw;
+	dev_set_drvdata(&cdev->dev, raw);
 	cdev->handler = raw3215_irq;
 
 	return 0;
 }
 
-static void
-raw3215_remove (struct ccw_device *cdev)
+static void raw3215_remove (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
 
 	ccw_device_set_offline(cdev);
-	raw = cdev->dev.driver_data;
+	raw = dev_get_drvdata(&cdev->dev);
 	if (raw) {
-		cdev->dev.driver_data = NULL;
+		dev_set_drvdata(&cdev->dev, NULL);
 		kfree(raw->buffer);
 		kfree(raw);
 	}
 }
 
-static int
-raw3215_set_online (struct ccw_device *cdev)
+static int raw3215_set_online (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
 
-	raw = cdev->dev.driver_data;
+	raw = dev_get_drvdata(&cdev->dev);
 	if (!raw)
 		return -ENODEV;
 
 	return raw3215_startup(raw);
 }
 
-static int
-raw3215_set_offline (struct ccw_device *cdev)
+static int raw3215_set_offline (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
 
-	raw = cdev->dev.driver_data;
+	raw = dev_get_drvdata(&cdev->dev);
 	if (!raw)
 		return -ENODEV;
 
@@ -715,6 +729,36 @@ raw3215_set_offline (struct ccw_device *cdev)
 	return 0;
 }
 
+static int raw3215_pm_stop(struct ccw_device *cdev)
+{
+	struct raw3215_info *raw;
+	unsigned long flags;
+
+	/* Empty the output buffer, then prevent new I/O. */
+	raw = cdev->dev.driver_data;
+	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
+	raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
+	raw->flags |= RAW3215_FROZEN;
+	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
+	return 0;
+}
+
+static int raw3215_pm_start(struct ccw_device *cdev)
+{
+	struct raw3215_info *raw;
+	unsigned long flags;
+
+	/* Allow I/O again and flush output buffer. */
+	raw = cdev->dev.driver_data;
+	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
+	raw->flags &= ~RAW3215_FROZEN;
+	raw->flags |= RAW3215_FLUSHING;
+	raw3215_try_io(raw);
+	raw->flags &= ~RAW3215_FLUSHING;
+	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
+	return 0;
+}
+
 static struct ccw_device_id raw3215_id[] = {
 	{ CCW_DEVICE(0x3215, 0) },
 	{ /* end of list */ },
@@ -728,14 +772,17 @@ static struct ccw_driver raw3215_ccw_driver = {
 	.remove		= &raw3215_remove,
 	.set_online	= &raw3215_set_online,
 	.set_offline	= &raw3215_set_offline,
+	.freeze		= &raw3215_pm_stop,
+	.thaw		= &raw3215_pm_start,
+	.restore	= &raw3215_pm_start,
 };
 
 #ifdef CONFIG_TN3215_CONSOLE
 /*
  * Write a string to the 3215 console
  */
-static void
-con3215_write(struct console *co, const char *str, unsigned int count)
+static void con3215_write(struct console *co, const char *str,
+			  unsigned int count)
 {
 	struct raw3215_info *raw;
 	int i;
@@ -768,13 +815,17 @@ static struct tty_driver *con3215_device(struct console *c, int *index)
  * panic() calls con3215_flush through a panic_notifier
  * before the system enters a disabled, endless loop.
  */
-static void
-con3215_flush(void)
+static void con3215_flush(void)
 {
 	struct raw3215_info *raw;
 	unsigned long flags;
 
 	raw = raw3215[0];  /* console 3215 is the first one */
+	if (raw->flags & RAW3215_FROZEN)
+		/* The console is still frozen for suspend. */
+		if (ccw_device_force_console())
+			/* Forcing didn't work, no panic message .. */
+			return;
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 	raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -811,8 +862,7 @@ static struct console con3215 = {
  * 3215 console initialization code called from console_init().
  * NOTE: This is called before kmalloc is available.
  */
-static int __init
-con3215_init(void)
+static int __init con3215_init(void)
 {
 	struct ccw_device *cdev;
 	struct raw3215_info *raw;
@@ -848,7 +898,7 @@ con3215_init(void)
 	raw->buffer = (char *) alloc_bootmem_low(RAW3215_BUFFER_SIZE);
 	raw->inbuf = (char *) alloc_bootmem_low(RAW3215_INBUF_SIZE);
 	raw->cdev = cdev;
-	cdev->dev.driver_data = raw;
+	dev_set_drvdata(&cdev->dev, raw);
 	cdev->handler = raw3215_irq;
 
 	raw->flags |= RAW3215_FIXED;
@@ -875,8 +925,7 @@ console_initcall(con3215_init);
  *
  * This routine is called whenever a 3215 tty is opened.
  */
-static int
-tty3215_open(struct tty_struct *tty, struct file * filp)
+static int tty3215_open(struct tty_struct *tty, struct file * filp)
 {
 	struct raw3215_info *raw;
 	int retval, line;
@@ -909,8 +958,7 @@ tty3215_open(struct tty_struct *tty, struct file * filp)
  * This routine is called when the 3215 tty is closed. We wait
  * for the remaining request to be completed. Then we clean up.
  */
-static void
-tty3215_close(struct tty_struct *tty, struct file * filp)
+static void tty3215_close(struct tty_struct *tty, struct file * filp)
 {
 	struct raw3215_info *raw;
 
@@ -927,8 +975,7 @@ tty3215_close(struct tty_struct *tty, struct file * filp)
 /*
  * Returns the amount of free space in the output buffer.
  */
-static int
-tty3215_write_room(struct tty_struct *tty)
+static int tty3215_write_room(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 
@@ -944,9 +991,8 @@ tty3215_write_room(struct tty_struct *tty)
 /*
  * String write routine for 3215 ttys
  */
-static int
-tty3215_write(struct tty_struct * tty,
-	      const unsigned char *buf, int count)
+static int tty3215_write(struct tty_struct * tty,
+			 const unsigned char *buf, int count)
 {
 	struct raw3215_info *raw;
 
@@ -960,8 +1006,7 @@ tty3215_write(struct tty_struct * tty,
 /*
  * Put character routine for 3215 ttys
  */
-static int
-tty3215_put_char(struct tty_struct *tty, unsigned char ch)
+static int tty3215_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	struct raw3215_info *raw;
 
@@ -972,16 +1017,14 @@ tty3215_put_char(struct tty_struct *tty, unsigned char ch)
 	return 1;
 }
 
-static void
-tty3215_flush_chars(struct tty_struct *tty)
+static void tty3215_flush_chars(struct tty_struct *tty)
 {
 }
 
 /*
  * Returns the number of characters in the output buffer
  */
-static int
-tty3215_chars_in_buffer(struct tty_struct *tty)
+static int tty3215_chars_in_buffer(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 
@@ -989,8 +1032,7 @@ tty3215_chars_in_buffer(struct tty_struct *tty)
 	return raw->count;
 }
 
-static void
-tty3215_flush_buffer(struct tty_struct *tty)
+static void tty3215_flush_buffer(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 
@@ -1002,9 +1044,8 @@ tty3215_flush_buffer(struct tty_struct *tty)
 /*
  * Currently we don't have any io controls for 3215 ttys
  */
-static int
-tty3215_ioctl(struct tty_struct *tty, struct file * file,
-	      unsigned int cmd, unsigned long arg)
+static int tty3215_ioctl(struct tty_struct *tty, struct file * file,
+			 unsigned int cmd, unsigned long arg)
 {
 	if (tty->flags & (1 << TTY_IO_ERROR))
 		return -EIO;
@@ -1019,8 +1060,7 @@ tty3215_ioctl(struct tty_struct *tty, struct file * file,
 /*
  * Disable reading from a 3215 tty
  */
-static void
-tty3215_throttle(struct tty_struct * tty)
+static void tty3215_throttle(struct tty_struct * tty)
 {
 	struct raw3215_info *raw;
 
@@ -1031,8 +1071,7 @@ tty3215_throttle(struct tty_struct * tty)
 /*
  * Enable reading from a 3215 tty
  */
-static void
-tty3215_unthrottle(struct tty_struct * tty)
+static void tty3215_unthrottle(struct tty_struct * tty)
 {
 	struct raw3215_info *raw;
 	unsigned long flags;
@@ -1049,8 +1088,7 @@ tty3215_unthrottle(struct tty_struct * tty)
 /*
  * Disable writing to a 3215 tty
  */
-static void
-tty3215_stop(struct tty_struct *tty)
+static void tty3215_stop(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 
@@ -1061,8 +1099,7 @@ tty3215_stop(struct tty_struct *tty)
 /*
  * Enable writing to a 3215 tty
  */
-static void
-tty3215_start(struct tty_struct *tty)
+static void tty3215_start(struct tty_struct *tty)
 {
 	struct raw3215_info *raw;
 	unsigned long flags;
@@ -1096,8 +1133,7 @@ static const struct tty_operations tty3215_ops = {
  * 3215 tty registration code called from tty_init().
  * Most kernel services (incl. kmalloc) are available at this poimt.
  */
-static int __init
-tty3215_init(void)
+static int __init tty3215_init(void)
 {
 	struct tty_driver *driver;
 	int ret;
@@ -1142,8 +1178,7 @@ tty3215_init(void)
 	return 0;
 }
 
-static void __exit
-tty3215_exit(void)
+static void __exit tty3215_exit(void)
 {
 	tty_unregister_driver(tty3215_driver);
 	put_tty_driver(tty3215_driver);
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index ed5396dae58..44d02e371c0 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/con3270.c
- *    IBM/3270 Driver - console view.
+ * IBM/3270 Driver - console view.
  *
- *  Author(s):
- *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
- *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s):
+ *   Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *   Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *     Copyright IBM Corp. 2003, 2009
  */
 
 #include <linux/bootmem.h>
@@ -530,6 +529,7 @@ con3270_flush(void)
 	cp = condev;
 	if (!cp->view.dev)
 		return;
+	raw3270_pm_unfreeze(&cp->view);
 	spin_lock_irqsave(&cp->view.lock, flags);
 	con3270_wait_write(cp);
 	cp->nr_up = 0;
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index 40759c33477..097d3846a82 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/fs3270.c
- *    IBM/3270 Driver - fullscreen driver.
+ * IBM/3270 Driver - fullscreen driver.
  *
- *  Author(s):
- *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
- *    Rewritten for 2.5/2.6 by Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s):
+ *   Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *   Rewritten for 2.5/2.6 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *     Copyright IBM Corp. 2003, 2009
  */
 
 #include <linux/bootmem.h>
@@ -399,6 +398,11 @@ fs3270_free_view(struct raw3270_view *view)
 static void
 fs3270_release(struct raw3270_view *view)
 {
+	struct fs3270 *fp;
+
+	fp = (struct fs3270 *) view;
+	if (fp->fs_pid)
+		kill_pid(fp->fs_pid, SIGHUP, 1);
 }
 
 /* View to a 3270 device. Can be console, tty or fullscreen. */
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 97e63cf4694..75a8831eebb 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -1,10 +1,9 @@
 /*
- * drivers/s390/char/monreader.c
- *
  * Character device driver for reading z/VM *MONITOR service records.
  *
- *   Copyright IBM Corp. 2004, 2008
- *   Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
+ * Copyright IBM Corp. 2004, 2009
+ *
+ * Author: Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
 #define KMSG_COMPONENT "monreader"
@@ -22,6 +21,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/poll.h>
+#include <linux/device.h>
 #include <net/iucv/iucv.h>
 #include <asm/uaccess.h>
 #include <asm/ebcdic.h>
@@ -78,6 +78,7 @@ static u8 user_data_sever[16] = {
 	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 };
 
+static struct device *monreader_device;
 
 /******************************************************************************
  *                             helper functions                               *
@@ -319,11 +320,12 @@ static int mon_open(struct inode *inode, struct file *filp)
 		goto out_path;
 	}
 	filp->private_data = monpriv;
+	monreader_device->driver_data = monpriv;
 	unlock_kernel();
 	return nonseekable_open(inode, filp);
 
 out_path:
-	kfree(monpriv->path);
+	iucv_path_free(monpriv->path);
 out_priv:
 	mon_free_mem(monpriv);
 out_use:
@@ -341,10 +343,13 @@ static int mon_close(struct inode *inode, struct file *filp)
 	/*
 	 * Close IUCV connection and unregister
 	 */
-	rc = iucv_path_sever(monpriv->path, user_data_sever);
-	if (rc)
-		pr_warning("Disconnecting the z/VM *MONITOR system service "
-			   "failed with rc=%i\n", rc);
+	if (monpriv->path) {
+		rc = iucv_path_sever(monpriv->path, user_data_sever);
+		if (rc)
+			pr_warning("Disconnecting the z/VM *MONITOR system "
+				   "service failed with rc=%i\n", rc);
+		iucv_path_free(monpriv->path);
+	}
 
 	atomic_set(&monpriv->iucv_severed, 0);
 	atomic_set(&monpriv->iucv_connected, 0);
@@ -452,6 +457,94 @@ static struct miscdevice mon_dev = {
 	.minor      = MISC_DYNAMIC_MINOR,
 };
 
+
+/******************************************************************************
+ *				suspend / resume			      *
+ *****************************************************************************/
+static int monreader_freeze(struct device *dev)
+{
+	struct mon_private *monpriv = dev->driver_data;
+	int rc;
+
+	if (!monpriv)
+		return 0;
+	if (monpriv->path) {
+		rc = iucv_path_sever(monpriv->path, user_data_sever);
+		if (rc)
+			pr_warning("Disconnecting the z/VM *MONITOR system "
+				   "service failed with rc=%i\n", rc);
+		iucv_path_free(monpriv->path);
+	}
+	atomic_set(&monpriv->iucv_severed, 0);
+	atomic_set(&monpriv->iucv_connected, 0);
+	atomic_set(&monpriv->read_ready, 0);
+	atomic_set(&monpriv->msglim_count, 0);
+	monpriv->write_index  = 0;
+	monpriv->read_index   = 0;
+	monpriv->path = NULL;
+	return 0;
+}
+
+static int monreader_thaw(struct device *dev)
+{
+	struct mon_private *monpriv = dev->driver_data;
+	int rc;
+
+	if (!monpriv)
+		return 0;
+	rc = -ENOMEM;
+	monpriv->path = iucv_path_alloc(MON_MSGLIM, IUCV_IPRMDATA, GFP_KERNEL);
+	if (!monpriv->path)
+		goto out;
+	rc = iucv_path_connect(monpriv->path, &monreader_iucv_handler,
+			       MON_SERVICE, NULL, user_data_connect, monpriv);
+	if (rc) {
+		pr_err("Connecting to the z/VM *MONITOR system service "
+		       "failed with rc=%i\n", rc);
+		goto out_path;
+	}
+	wait_event(mon_conn_wait_queue,
+		   atomic_read(&monpriv->iucv_connected) ||
+		   atomic_read(&monpriv->iucv_severed));
+	if (atomic_read(&monpriv->iucv_severed))
+		goto out_path;
+	return 0;
+out_path:
+	rc = -EIO;
+	iucv_path_free(monpriv->path);
+	monpriv->path = NULL;
+out:
+	atomic_set(&monpriv->iucv_severed, 1);
+	return rc;
+}
+
+static int monreader_restore(struct device *dev)
+{
+	int rc;
+
+	segment_unload(mon_dcss_name);
+	rc = segment_load(mon_dcss_name, SEGMENT_SHARED,
+			  &mon_dcss_start, &mon_dcss_end);
+	if (rc < 0) {
+		segment_warning(rc, mon_dcss_name);
+		panic("fatal monreader resume error: no monitor dcss\n");
+	}
+	return monreader_thaw(dev);
+}
+
+static struct dev_pm_ops monreader_pm_ops = {
+	.freeze  = monreader_freeze,
+	.thaw	 = monreader_thaw,
+	.restore = monreader_restore,
+};
+
+static struct device_driver monreader_driver = {
+	.name = "monreader",
+	.bus  = &iucv_bus,
+	.pm   = &monreader_pm_ops,
+};
+
+
 /******************************************************************************
  *                              module init/exit                              *
  *****************************************************************************/
@@ -475,16 +568,33 @@ static int __init mon_init(void)
 		return rc;
 	}
 
+	rc = driver_register(&monreader_driver);
+	if (rc)
+		goto out_iucv;
+	monreader_device = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!monreader_device)
+		goto out_driver;
+	dev_set_name(monreader_device, "monreader-dev");
+	monreader_device->bus = &iucv_bus;
+	monreader_device->parent = iucv_root;
+	monreader_device->driver = &monreader_driver;
+	monreader_device->release = (void (*)(struct device *))kfree;
+	rc = device_register(monreader_device);
+	if (rc) {
+		kfree(monreader_device);
+		goto out_driver;
+	}
+
 	rc = segment_type(mon_dcss_name);
 	if (rc < 0) {
 		segment_warning(rc, mon_dcss_name);
-		goto out_iucv;
+		goto out_device;
 	}
 	if (rc != SEG_TYPE_SC) {
 		pr_err("The specified *MONITOR DCSS %s does not have the "
 		       "required type SC\n", mon_dcss_name);
 		rc = -EINVAL;
-		goto out_iucv;
+		goto out_device;
 	}
 
 	rc = segment_load(mon_dcss_name, SEGMENT_SHARED,
@@ -492,7 +602,7 @@ static int __init mon_init(void)
 	if (rc < 0) {
 		segment_warning(rc, mon_dcss_name);
 		rc = -EINVAL;
-		goto out_iucv;
+		goto out_device;
 	}
 	dcss_mkname(mon_dcss_name, &user_data_connect[8]);
 
@@ -503,6 +613,10 @@ static int __init mon_init(void)
 
 out:
 	segment_unload(mon_dcss_name);
+out_device:
+	device_unregister(monreader_device);
+out_driver:
+	driver_unregister(&monreader_driver);
 out_iucv:
 	iucv_unregister(&monreader_iucv_handler, 1);
 	return rc;
@@ -512,6 +626,8 @@ static void __exit mon_exit(void)
 {
 	segment_unload(mon_dcss_name);
 	WARN_ON(misc_deregister(&mon_dev) != 0);
+	device_unregister(monreader_device);
+	driver_unregister(&monreader_driver);
 	iucv_unregister(&monreader_iucv_handler, 1);
 	return;
 }
diff --git a/drivers/s390/char/monwriter.c b/drivers/s390/char/monwriter.c
index c7d7483bab9..66fb8eba93f 100644
--- a/drivers/s390/char/monwriter.c
+++ b/drivers/s390/char/monwriter.c
@@ -1,9 +1,7 @@
 /*
- * drivers/s390/char/monwriter.c
- *
  * Character device driver for writing z/VM *MONITOR service records.
  *
- * Copyright (C) IBM Corp. 2006
+ * Copyright IBM Corp. 2006, 2009
  *
  * Author(s): Melissa Howland <Melissa.Howland@us.ibm.com>
  */
@@ -22,6 +20,7 @@
 #include <linux/ctype.h>
 #include <linux/poll.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
 #include <asm/uaccess.h>
 #include <asm/ebcdic.h>
 #include <asm/io.h>
@@ -40,7 +39,10 @@ struct mon_buf {
 	char *data;
 };
 
+static LIST_HEAD(mon_priv_list);
+
 struct mon_private {
+	struct list_head priv_list;
 	struct list_head list;
 	struct monwrite_hdr hdr;
 	size_t hdr_to_read;
@@ -188,6 +190,7 @@ static int monwrite_open(struct inode *inode, struct file *filp)
 	monpriv->hdr_to_read = sizeof(monpriv->hdr);
 	mutex_init(&monpriv->thread_mutex);
 	filp->private_data = monpriv;
+	list_add_tail(&monpriv->priv_list, &mon_priv_list);
 	unlock_kernel();
 	return nonseekable_open(inode, filp);
 }
@@ -206,6 +209,7 @@ static int monwrite_close(struct inode *inode, struct file *filp)
 		kfree(entry->data);
 		kfree(entry);
 	}
+	list_del(&monpriv->priv_list);
 	kfree(monpriv);
 	return 0;
 }
@@ -281,20 +285,102 @@ static struct miscdevice mon_dev = {
 };
 
 /*
+ * suspend/resume
+ */
+
+static int monwriter_freeze(struct device *dev)
+{
+	struct mon_private *monpriv;
+	struct mon_buf *monbuf;
+
+	list_for_each_entry(monpriv, &mon_priv_list, priv_list) {
+		list_for_each_entry(monbuf, &monpriv->list, list) {
+			if (monbuf->hdr.mon_function != MONWRITE_GEN_EVENT)
+				monwrite_diag(&monbuf->hdr, monbuf->data,
+					      APPLDATA_STOP_REC);
+		}
+	}
+	return 0;
+}
+
+static int monwriter_restore(struct device *dev)
+{
+	struct mon_private *monpriv;
+	struct mon_buf *monbuf;
+
+	list_for_each_entry(monpriv, &mon_priv_list, priv_list) {
+		list_for_each_entry(monbuf, &monpriv->list, list) {
+			if (monbuf->hdr.mon_function == MONWRITE_START_INTERVAL)
+				monwrite_diag(&monbuf->hdr, monbuf->data,
+					      APPLDATA_START_INTERVAL_REC);
+			if (monbuf->hdr.mon_function == MONWRITE_START_CONFIG)
+				monwrite_diag(&monbuf->hdr, monbuf->data,
+					      APPLDATA_START_CONFIG_REC);
+		}
+	}
+	return 0;
+}
+
+static int monwriter_thaw(struct device *dev)
+{
+	return monwriter_restore(dev);
+}
+
+static struct dev_pm_ops monwriter_pm_ops = {
+	.freeze		= monwriter_freeze,
+	.thaw		= monwriter_thaw,
+	.restore	= monwriter_restore,
+};
+
+static struct platform_driver monwriter_pdrv = {
+	.driver = {
+		.name	= "monwriter",
+		.owner	= THIS_MODULE,
+		.pm	= &monwriter_pm_ops,
+	},
+};
+
+static struct platform_device *monwriter_pdev;
+
+/*
  * module init/exit
  */
 
 static int __init mon_init(void)
 {
-	if (MACHINE_IS_VM)
-		return misc_register(&mon_dev);
-	else
+	int rc;
+
+	if (!MACHINE_IS_VM)
 		return -ENODEV;
+
+	rc = platform_driver_register(&monwriter_pdrv);
+	if (rc)
+		return rc;
+
+	monwriter_pdev = platform_device_register_simple("monwriter", -1, NULL,
+							0);
+	if (IS_ERR(monwriter_pdev)) {
+		rc = PTR_ERR(monwriter_pdev);
+		goto out_driver;
+	}
+
+	rc = misc_register(&mon_dev);
+	if (rc)
+		goto out_device;
+	return 0;
+
+out_device:
+	platform_device_unregister(monwriter_pdev);
+out_driver:
+	platform_driver_unregister(&monwriter_pdrv);
+	return rc;
 }
 
 static void __exit mon_exit(void)
 {
 	WARN_ON(misc_deregister(&mon_dev) != 0);
+	platform_device_unregister(monwriter_pdev);
+	platform_driver_unregister(&monwriter_pdrv);
 }
 
 module_init(mon_init);
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 0b15cf107ec..acab7b2dfe8 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/raw3270.c
- *    IBM/3270 Driver - core functions.
+ * IBM/3270 Driver - core functions.
  *
- *  Author(s):
- *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
- *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s):
+ *   Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *   Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *     Copyright IBM Corp. 2003, 2009
  */
 
 #include <linux/bootmem.h>
@@ -61,6 +60,7 @@ struct raw3270 {
 #define RAW3270_FLAGS_ATTN	2	/* Device sent an ATTN interrupt */
 #define RAW3270_FLAGS_READY	4	/* Device is useable by views */
 #define RAW3270_FLAGS_CONSOLE	8	/* Device is the console. */
+#define RAW3270_FLAGS_FROZEN	16	/* set if 3270 is frozen for suspend */
 
 /* Semaphore to protect global data of raw3270 (devices, views, etc). */
 static DEFINE_MUTEX(raw3270_mutex);
@@ -306,7 +306,8 @@ raw3270_start(struct raw3270_view *view, struct raw3270_request *rq)
 
 	spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
 	rp = view->dev;
-	if (!rp || rp->view != view)
+	if (!rp || rp->view != view ||
+	    test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
 		rc = -EACCES;
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
@@ -323,7 +324,8 @@ raw3270_start_locked(struct raw3270_view *view, struct raw3270_request *rq)
 	int rc;
 
 	rp = view->dev;
-	if (!rp || rp->view != view)
+	if (!rp || rp->view != view ||
+	    test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
 		rc = -EACCES;
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
@@ -355,7 +357,7 @@ raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	struct raw3270_request *rq;
 	int rc;
 
-	rp = (struct raw3270 *) cdev->dev.driver_data;
+	rp = dev_get_drvdata(&cdev->dev);
 	if (!rp)
 		return;
 	rq = (struct raw3270_request *) intparm;
@@ -764,7 +766,8 @@ raw3270_reset(struct raw3270_view *view)
 	int rc;
 
 	rp = view->dev;
-	if (!rp || rp->view != view)
+	if (!rp || rp->view != view ||
+	    test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
 		rc = -EACCES;
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
@@ -828,7 +831,7 @@ raw3270_setup_device(struct ccw_device *cdev, struct raw3270 *rp, char *ascebc)
 	if (rp->minor == -1)
 		return -EUSERS;
 	rp->cdev = cdev;
-	cdev->dev.driver_data = rp;
+	dev_set_drvdata(&cdev->dev, rp);
 	cdev->handler = raw3270_irq;
 	return 0;
 }
@@ -922,6 +925,8 @@ raw3270_activate_view(struct raw3270_view *view)
 		rc = 0;
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
+	else if (test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
+		rc = -EACCES;
 	else {
 		oldview = NULL;
 		if (rp->view) {
@@ -969,7 +974,8 @@ raw3270_deactivate_view(struct raw3270_view *view)
 		list_del_init(&view->list);
 		list_add_tail(&view->list, &rp->view_list);
 		/* Try to activate another view. */
-		if (test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
+		if (test_bit(RAW3270_FLAGS_READY, &rp->flags) &&
+		    !test_bit(RAW3270_FLAGS_FROZEN, &rp->flags)) {
 			list_for_each_entry(view, &rp->view_list, list) {
 				rp->view = view;
 				if (view->fn->activate(view) == 0)
@@ -1068,7 +1074,8 @@ raw3270_del_view(struct raw3270_view *view)
 		rp->view = NULL;
 	}
 	list_del_init(&view->list);
-	if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
+	if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags) &&
+	    !test_bit(RAW3270_FLAGS_FROZEN, &rp->flags)) {
 		/* Try to activate another view. */
 		list_for_each_entry(nv, &rp->view_list, list) {
 			if (nv->fn->activate(nv) == 0) {
@@ -1105,7 +1112,7 @@ raw3270_delete_device(struct raw3270 *rp)
 	/* Disconnect from ccw_device. */
 	cdev = rp->cdev;
 	rp->cdev = NULL;
-	cdev->dev.driver_data = NULL;
+	dev_set_drvdata(&cdev->dev, NULL);
 	cdev->handler = NULL;
 
 	/* Put ccw_device structure. */
@@ -1129,7 +1136,7 @@ static ssize_t
 raw3270_model_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%i\n",
-			((struct raw3270 *) dev->driver_data)->model);
+			((struct raw3270 *) dev_get_drvdata(dev))->model);
 }
 static DEVICE_ATTR(model, 0444, raw3270_model_show, NULL);
 
@@ -1137,7 +1144,7 @@ static ssize_t
 raw3270_rows_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%i\n",
-			((struct raw3270 *) dev->driver_data)->rows);
+			((struct raw3270 *) dev_get_drvdata(dev))->rows);
 }
 static DEVICE_ATTR(rows, 0444, raw3270_rows_show, NULL);
 
@@ -1145,7 +1152,7 @@ static ssize_t
 raw3270_columns_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%i\n",
-			((struct raw3270 *) dev->driver_data)->cols);
+			((struct raw3270 *) dev_get_drvdata(dev))->cols);
 }
 static DEVICE_ATTR(columns, 0444, raw3270_columns_show, NULL);
 
@@ -1282,7 +1289,7 @@ raw3270_remove (struct ccw_device *cdev)
 	struct raw3270_view *v;
 	struct raw3270_notifier *np;
 
-	rp = cdev->dev.driver_data;
+	rp = dev_get_drvdata(&cdev->dev);
 	/*
 	 * _remove is the opposite of _probe; it's probe that
 	 * should set up rp.  raw3270_remove gets entered for
@@ -1330,13 +1337,65 @@ raw3270_set_offline (struct ccw_device *cdev)
 {
 	struct raw3270 *rp;
 
-	rp = cdev->dev.driver_data;
+	rp = dev_get_drvdata(&cdev->dev);
 	if (test_bit(RAW3270_FLAGS_CONSOLE, &rp->flags))
 		return -EBUSY;
 	raw3270_remove(cdev);
 	return 0;
 }
 
+static int raw3270_pm_stop(struct ccw_device *cdev)
+{
+	struct raw3270 *rp;
+	struct raw3270_view *view;
+	unsigned long flags;
+
+	rp = cdev->dev.driver_data;
+	if (!rp)
+		return 0;
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	if (rp->view)
+		rp->view->fn->deactivate(rp->view);
+	if (!test_bit(RAW3270_FLAGS_CONSOLE, &rp->flags)) {
+		/*
+		 * Release tty and fullscreen for all non-console
+		 * devices.
+		 */
+		list_for_each_entry(view, &rp->view_list, list) {
+			if (view->fn->release)
+				view->fn->release(view);
+		}
+	}
+	set_bit(RAW3270_FLAGS_FROZEN, &rp->flags);
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+	return 0;
+}
+
+static int raw3270_pm_start(struct ccw_device *cdev)
+{
+	struct raw3270 *rp;
+	unsigned long flags;
+
+	rp = cdev->dev.driver_data;
+	if (!rp)
+		return 0;
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	clear_bit(RAW3270_FLAGS_FROZEN, &rp->flags);
+	if (rp->view)
+		rp->view->fn->activate(rp->view);
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+	return 0;
+}
+
+void raw3270_pm_unfreeze(struct raw3270_view *view)
+{
+	struct raw3270 *rp;
+
+	rp = view->dev;
+	if (rp && test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
+		ccw_device_force_console();
+}
+
 static struct ccw_device_id raw3270_id[] = {
 	{ CCW_DEVICE(0x3270, 0) },
 	{ CCW_DEVICE(0x3271, 0) },
@@ -1360,6 +1419,9 @@ static struct ccw_driver raw3270_ccw_driver = {
 	.remove		= &raw3270_remove,
 	.set_online	= &raw3270_set_online,
 	.set_offline	= &raw3270_set_offline,
+	.freeze		= &raw3270_pm_stop,
+	.thaw		= &raw3270_pm_start,
+	.restore	= &raw3270_pm_start,
 };
 
 static int
diff --git a/drivers/s390/char/raw3270.h b/drivers/s390/char/raw3270.h
index 90beaa80a78..ed34eb2199c 100644
--- a/drivers/s390/char/raw3270.h
+++ b/drivers/s390/char/raw3270.h
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/raw3270.h
- *    IBM/3270 Driver
+ * IBM/3270 Driver
  *
- *  Author(s):
- *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
- *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s):
+ *   Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *   Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *     Copyright IBM Corp. 2003, 2009
  */
 
 #include <asm/idals.h>
@@ -195,6 +194,7 @@ void raw3270_wait_cons_dev(struct raw3270 *);
 /* Notifier for device addition/removal */
 int raw3270_register_notifier(void (*notifier)(int, int));
 void raw3270_unregister_notifier(void (*notifier)(int, int));
+void raw3270_pm_unfreeze(struct raw3270_view *);
 
 /*
  * Little memory allocator for string objects. 
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 4377e93a43d..a983f508678 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/sclp.c
- *     core function to access sclp interface
+ * core function to access sclp interface
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Copyright IBM Corp. 1999, 2009
+ *
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #include <linux/module.h>
@@ -16,6 +15,9 @@
 #include <linux/reboot.h>
 #include <linux/jiffies.h>
 #include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
 #include <asm/types.h>
 #include <asm/s390_ext.h>
 
@@ -47,6 +49,16 @@ static struct sclp_req sclp_init_req;
 static char sclp_read_sccb[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 static char sclp_init_sccb[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
+/* Suspend request */
+static DECLARE_COMPLETION(sclp_request_queue_flushed);
+
+static void sclp_suspend_req_cb(struct sclp_req *req, void *data)
+{
+	complete(&sclp_request_queue_flushed);
+}
+
+static struct sclp_req sclp_suspend_req;
+
 /* Timer for request retries. */
 static struct timer_list sclp_request_timer;
 
@@ -84,6 +96,12 @@ static volatile enum sclp_mask_state_t {
 	sclp_mask_state_initializing
 } sclp_mask_state = sclp_mask_state_idle;
 
+/* Internal state: is the driver suspended? */
+static enum sclp_suspend_state_t {
+	sclp_suspend_state_running,
+	sclp_suspend_state_suspended,
+} sclp_suspend_state = sclp_suspend_state_running;
+
 /* Maximum retry counts */
 #define SCLP_INIT_RETRY		3
 #define SCLP_MASK_RETRY		3
@@ -211,6 +229,8 @@ sclp_process_queue(void)
 	del_timer(&sclp_request_timer);
 	while (!list_empty(&sclp_req_queue)) {
 		req = list_entry(sclp_req_queue.next, struct sclp_req, list);
+		if (!req->sccb)
+			goto do_post;
 		rc = __sclp_start_request(req);
 		if (rc == 0)
 			break;
@@ -222,6 +242,7 @@ sclp_process_queue(void)
 						 sclp_request_timeout, 0);
 			break;
 		}
+do_post:
 		/* Post-processing for aborted request */
 		list_del(&req->list);
 		if (req->callback) {
@@ -233,6 +254,19 @@ sclp_process_queue(void)
 	spin_unlock_irqrestore(&sclp_lock, flags);
 }
 
+static int __sclp_can_add_request(struct sclp_req *req)
+{
+	if (req == &sclp_suspend_req || req == &sclp_init_req)
+		return 1;
+	if (sclp_suspend_state != sclp_suspend_state_running)
+		return 0;
+	if (sclp_init_state != sclp_init_state_initialized)
+		return 0;
+	if (sclp_activation_state != sclp_activation_state_active)
+		return 0;
+	return 1;
+}
+
 /* Queue a new request. Return zero on success, non-zero otherwise. */
 int
 sclp_add_request(struct sclp_req *req)
@@ -241,9 +275,7 @@ sclp_add_request(struct sclp_req *req)
 	int rc;
 
 	spin_lock_irqsave(&sclp_lock, flags);
-	if ((sclp_init_state != sclp_init_state_initialized ||
-	     sclp_activation_state != sclp_activation_state_active) &&
-	    req != &sclp_init_req) {
+	if (!__sclp_can_add_request(req)) {
 		spin_unlock_irqrestore(&sclp_lock, flags);
 		return -EIO;
 	}
@@ -254,10 +286,16 @@ sclp_add_request(struct sclp_req *req)
 	/* Start if request is first in list */
 	if (sclp_running_state == sclp_running_state_idle &&
 	    req->list.prev == &sclp_req_queue) {
+		if (!req->sccb) {
+			list_del(&req->list);
+			rc = -ENODATA;
+			goto out;
+		}
 		rc = __sclp_start_request(req);
 		if (rc)
 			list_del(&req->list);
 	}
+out:
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	return rc;
 }
@@ -560,6 +598,7 @@ sclp_register(struct sclp_register *reg)
 	/* Trigger initial state change callback */
 	reg->sclp_receive_mask = 0;
 	reg->sclp_send_mask = 0;
+	reg->pm_event_posted = 0;
 	list_add(&reg->list, &sclp_reg_list);
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	rc = sclp_init_mask(1);
@@ -880,20 +919,134 @@ static struct notifier_block sclp_reboot_notifier = {
 	.notifier_call = sclp_reboot_event
 };
 
+/*
+ * Suspend/resume SCLP notifier implementation
+ */
+
+static void sclp_pm_event(enum sclp_pm_event sclp_pm_event, int rollback)
+{
+	struct sclp_register *reg;
+	unsigned long flags;
+
+	if (!rollback) {
+		spin_lock_irqsave(&sclp_lock, flags);
+		list_for_each_entry(reg, &sclp_reg_list, list)
+			reg->pm_event_posted = 0;
+		spin_unlock_irqrestore(&sclp_lock, flags);
+	}
+	do {
+		spin_lock_irqsave(&sclp_lock, flags);
+		list_for_each_entry(reg, &sclp_reg_list, list) {
+			if (rollback && reg->pm_event_posted)
+				goto found;
+			if (!rollback && !reg->pm_event_posted)
+				goto found;
+		}
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return;
+found:
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		if (reg->pm_event_fn)
+			reg->pm_event_fn(reg, sclp_pm_event);
+		reg->pm_event_posted = rollback ? 0 : 1;
+	} while (1);
+}
+
+/*
+ * Susend/resume callbacks for platform device
+ */
+
+static int sclp_freeze(struct device *dev)
+{
+	unsigned long flags;
+	int rc;
+
+	sclp_pm_event(SCLP_PM_EVENT_FREEZE, 0);
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	sclp_suspend_state = sclp_suspend_state_suspended;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+
+	/* Init supend data */
+	memset(&sclp_suspend_req, 0, sizeof(sclp_suspend_req));
+	sclp_suspend_req.callback = sclp_suspend_req_cb;
+	sclp_suspend_req.status = SCLP_REQ_FILLED;
+	init_completion(&sclp_request_queue_flushed);
+
+	rc = sclp_add_request(&sclp_suspend_req);
+	if (rc == 0)
+		wait_for_completion(&sclp_request_queue_flushed);
+	else if (rc != -ENODATA)
+		goto fail_thaw;
+
+	rc = sclp_deactivate();
+	if (rc)
+		goto fail_thaw;
+	return 0;
+
+fail_thaw:
+	spin_lock_irqsave(&sclp_lock, flags);
+	sclp_suspend_state = sclp_suspend_state_running;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	sclp_pm_event(SCLP_PM_EVENT_THAW, 1);
+	return rc;
+}
+
+static int sclp_undo_suspend(enum sclp_pm_event event)
+{
+	unsigned long flags;
+	int rc;
+
+	rc = sclp_reactivate();
+	if (rc)
+		return rc;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	sclp_suspend_state = sclp_suspend_state_running;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+
+	sclp_pm_event(event, 0);
+	return 0;
+}
+
+static int sclp_thaw(struct device *dev)
+{
+	return sclp_undo_suspend(SCLP_PM_EVENT_THAW);
+}
+
+static int sclp_restore(struct device *dev)
+{
+	return sclp_undo_suspend(SCLP_PM_EVENT_RESTORE);
+}
+
+static struct dev_pm_ops sclp_pm_ops = {
+	.freeze		= sclp_freeze,
+	.thaw		= sclp_thaw,
+	.restore	= sclp_restore,
+};
+
+static struct platform_driver sclp_pdrv = {
+	.driver = {
+		.name	= "sclp",
+		.owner	= THIS_MODULE,
+		.pm	= &sclp_pm_ops,
+	},
+};
+
+static struct platform_device *sclp_pdev;
+
 /* Initialize SCLP driver. Return zero if driver is operational, non-zero
  * otherwise. */
 static int
 sclp_init(void)
 {
 	unsigned long flags;
-	int rc;
+	int rc = 0;
 
 	spin_lock_irqsave(&sclp_lock, flags);
 	/* Check for previous or running initialization */
-	if (sclp_init_state != sclp_init_state_uninitialized) {
-		spin_unlock_irqrestore(&sclp_lock, flags);
-		return 0;
-	}
+	if (sclp_init_state != sclp_init_state_uninitialized)
+		goto fail_unlock;
 	sclp_init_state = sclp_init_state_initializing;
 	/* Set up variables */
 	INIT_LIST_HEAD(&sclp_req_queue);
@@ -904,27 +1057,17 @@ sclp_init(void)
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	rc = sclp_check_interface();
 	spin_lock_irqsave(&sclp_lock, flags);
-	if (rc) {
-		sclp_init_state = sclp_init_state_uninitialized;
-		spin_unlock_irqrestore(&sclp_lock, flags);
-		return rc;
-	}
+	if (rc)
+		goto fail_init_state_uninitialized;
 	/* Register reboot handler */
 	rc = register_reboot_notifier(&sclp_reboot_notifier);
-	if (rc) {
-		sclp_init_state = sclp_init_state_uninitialized;
-		spin_unlock_irqrestore(&sclp_lock, flags);
-		return rc;
-	}
+	if (rc)
+		goto fail_init_state_uninitialized;
 	/* Register interrupt handler */
 	rc = register_early_external_interrupt(0x2401, sclp_interrupt_handler,
 					       &ext_int_info_hwc);
-	if (rc) {
-		unregister_reboot_notifier(&sclp_reboot_notifier);
-		sclp_init_state = sclp_init_state_uninitialized;
-		spin_unlock_irqrestore(&sclp_lock, flags);
-		return rc;
-	}
+	if (rc)
+		goto fail_unregister_reboot_notifier;
 	sclp_init_state = sclp_init_state_initialized;
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	/* Enable service-signal external interruption - needs to happen with
@@ -932,11 +1075,56 @@ sclp_init(void)
 	ctl_set_bit(0, 9);
 	sclp_init_mask(1);
 	return 0;
+
+fail_unregister_reboot_notifier:
+	unregister_reboot_notifier(&sclp_reboot_notifier);
+fail_init_state_uninitialized:
+	sclp_init_state = sclp_init_state_uninitialized;
+fail_unlock:
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	return rc;
 }
 
+/*
+ * SCLP panic notifier: If we are suspended, we thaw SCLP in order to be able
+ * to print the panic message.
+ */
+static int sclp_panic_notify(struct notifier_block *self,
+			     unsigned long event, void *data)
+{
+	if (sclp_suspend_state == sclp_suspend_state_suspended)
+		sclp_undo_suspend(SCLP_PM_EVENT_THAW);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sclp_on_panic_nb = {
+	.notifier_call = sclp_panic_notify,
+	.priority = SCLP_PANIC_PRIO,
+};
+
 static __init int sclp_initcall(void)
 {
+	int rc;
+
+	rc = platform_driver_register(&sclp_pdrv);
+	if (rc)
+		return rc;
+	sclp_pdev = platform_device_register_simple("sclp", -1, NULL, 0);
+	rc = IS_ERR(sclp_pdev) ? PTR_ERR(sclp_pdev) : 0;
+	if (rc)
+		goto fail_platform_driver_unregister;
+	rc = atomic_notifier_chain_register(&panic_notifier_list,
+					    &sclp_on_panic_nb);
+	if (rc)
+		goto fail_platform_device_unregister;
+
 	return sclp_init();
+
+fail_platform_device_unregister:
+	platform_device_unregister(sclp_pdev);
+fail_platform_driver_unregister:
+	platform_driver_unregister(&sclp_pdrv);
+	return rc;
 }
 
 arch_initcall(sclp_initcall);
diff --git a/drivers/s390/char/sclp.h b/drivers/s390/char/sclp.h
index bac80e856f9..60e7cb07095 100644
--- a/drivers/s390/char/sclp.h
+++ b/drivers/s390/char/sclp.h
@@ -1,10 +1,8 @@
 /*
- *  drivers/s390/char/sclp.h
+ * Copyright IBM Corp. 1999, 2009
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #ifndef __SCLP_H__
@@ -17,7 +15,7 @@
 
 /* maximum number of pages concerning our own memory management */
 #define MAX_KMEM_PAGES (sizeof(unsigned long) << 3)
-#define MAX_CONSOLE_PAGES	4
+#define MAX_CONSOLE_PAGES	6
 
 #define EVTYP_OPCMD		0x01
 #define EVTYP_MSG		0x02
@@ -68,6 +66,15 @@ typedef unsigned int sclp_cmdw_t;
 
 #define GDS_KEY_SELFDEFTEXTMSG	0x31
 
+enum sclp_pm_event {
+	SCLP_PM_EVENT_FREEZE,
+	SCLP_PM_EVENT_THAW,
+	SCLP_PM_EVENT_RESTORE,
+};
+
+#define SCLP_PANIC_PRIO		1
+#define SCLP_PANIC_PRIO_CLIENT	0
+
 typedef u32 sccb_mask_t;	/* ATTENTION: assumes 32bit mask !!! */
 
 struct sccb_header {
@@ -134,6 +141,10 @@ struct sclp_register {
 	void (*state_change_fn)(struct sclp_register *);
 	/* called for events in cp_receive_mask/sclp_receive_mask */
 	void (*receiver_fn)(struct evbuf_header *);
+	/* called for power management events */
+	void (*pm_event_fn)(struct sclp_register *, enum sclp_pm_event);
+	/* pm event posted flag */
+	int pm_event_posted;
 };
 
 /* externals from sclp.c */
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 77ab6e34a10..5cc11c636d3 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -1,9 +1,8 @@
 /*
- *  drivers/s390/char/sclp_cmd.c
+ * Copyright IBM Corp. 2007, 2009
  *
- *    Copyright IBM Corp. 2007
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
- *		 Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *	      Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
  */
 
 #define KMSG_COMPONENT "sclp_cmd"
@@ -12,11 +11,13 @@
 #include <linux/completion.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/memory.h>
+#include <linux/platform_device.h>
 #include <asm/chpid.h>
 #include <asm/sclp.h>
 #include <asm/setup.h>
@@ -292,6 +293,7 @@ static DEFINE_MUTEX(sclp_mem_mutex);
 static LIST_HEAD(sclp_mem_list);
 static u8 sclp_max_storage_id;
 static unsigned long sclp_storage_ids[256 / BITS_PER_LONG];
+static int sclp_mem_state_changed;
 
 struct memory_increment {
 	struct list_head list;
@@ -450,6 +452,8 @@ static int sclp_mem_notifier(struct notifier_block *nb,
 		rc = -EINVAL;
 		break;
 	}
+	if (!rc)
+		sclp_mem_state_changed = 1;
 	mutex_unlock(&sclp_mem_mutex);
 	return rc ? NOTIFY_BAD : NOTIFY_OK;
 }
@@ -525,6 +529,14 @@ static void __init insert_increment(u16 rn, int standby, int assigned)
 	list_add(&new_incr->list, prev);
 }
 
+static int sclp_mem_freeze(struct device *dev)
+{
+	if (!sclp_mem_state_changed)
+		return 0;
+	pr_err("Memory hotplug state changed, suspend refused.\n");
+	return -EPERM;
+}
+
 struct read_storage_sccb {
 	struct sccb_header header;
 	u16 max_id;
@@ -534,8 +546,20 @@ struct read_storage_sccb {
 	u32 entries[0];
 } __packed;
 
+static struct dev_pm_ops sclp_mem_pm_ops = {
+	.freeze		= sclp_mem_freeze,
+};
+
+static struct platform_driver sclp_mem_pdrv = {
+	.driver = {
+		.name	= "sclp_mem",
+		.pm	= &sclp_mem_pm_ops,
+	},
+};
+
 static int __init sclp_detect_standby_memory(void)
 {
+	struct platform_device *sclp_pdev;
 	struct read_storage_sccb *sccb;
 	int i, id, assigned, rc;
 
@@ -588,7 +612,17 @@ static int __init sclp_detect_standby_memory(void)
 	rc = register_memory_notifier(&sclp_mem_nb);
 	if (rc)
 		goto out;
+	rc = platform_driver_register(&sclp_mem_pdrv);
+	if (rc)
+		goto out;
+	sclp_pdev = platform_device_register_simple("sclp_mem", -1, NULL, 0);
+	rc = IS_ERR(sclp_pdev) ? PTR_ERR(sclp_pdev) : 0;
+	if (rc)
+		goto out_driver;
 	sclp_add_standby_memory();
+	goto out;
+out_driver:
+	platform_driver_unregister(&sclp_mem_pdrv);
 out:
 	free_page((unsigned long) sccb);
 	return rc;
diff --git a/drivers/s390/char/sclp_con.c b/drivers/s390/char/sclp_con.c
index 9a25c4bd142..336811a7767 100644
--- a/drivers/s390/char/sclp_con.c
+++ b/drivers/s390/char/sclp_con.c
@@ -1,11 +1,9 @@
 /*
- *  drivers/s390/char/sclp_con.c
- *    SCLP line mode console driver
+ * SCLP line mode console driver
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Copyright IBM Corp. 1999, 2009
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #include <linux/kmod.h>
@@ -32,13 +30,14 @@ static spinlock_t sclp_con_lock;
 static struct list_head sclp_con_pages;
 /* List of full struct sclp_buffer structures ready for output */
 static struct list_head sclp_con_outqueue;
-/* Counter how many buffers are emitted (max 1) and how many */
-/* are on the output queue. */
-static int sclp_con_buffer_count;
 /* Pointer to current console buffer */
 static struct sclp_buffer *sclp_conbuf;
 /* Timer for delayed output of console messages */
 static struct timer_list sclp_con_timer;
+/* Suspend mode flag */
+static int sclp_con_suspended;
+/* Flag that output queue is currently running */
+static int sclp_con_queue_running;
 
 /* Output format for console messages */
 static unsigned short sclp_con_columns;
@@ -53,42 +52,71 @@ sclp_conbuf_callback(struct sclp_buffer *buffer, int rc)
 	do {
 		page = sclp_unmake_buffer(buffer);
 		spin_lock_irqsave(&sclp_con_lock, flags);
+
 		/* Remove buffer from outqueue */
 		list_del(&buffer->list);
-		sclp_con_buffer_count--;
 		list_add_tail((struct list_head *) page, &sclp_con_pages);
+
 		/* Check if there is a pending buffer on the out queue. */
 		buffer = NULL;
 		if (!list_empty(&sclp_con_outqueue))
-			buffer = list_entry(sclp_con_outqueue.next,
-					    struct sclp_buffer, list);
+			buffer = list_first_entry(&sclp_con_outqueue,
+						  struct sclp_buffer, list);
+		if (!buffer || sclp_con_suspended) {
+			sclp_con_queue_running = 0;
+			spin_unlock_irqrestore(&sclp_con_lock, flags);
+			break;
+		}
 		spin_unlock_irqrestore(&sclp_con_lock, flags);
-	} while (buffer && sclp_emit_buffer(buffer, sclp_conbuf_callback));
+	} while (sclp_emit_buffer(buffer, sclp_conbuf_callback));
 }
 
-static void
-sclp_conbuf_emit(void)
+/*
+ * Finalize and emit first pending buffer.
+ */
+static void sclp_conbuf_emit(void)
 {
 	struct sclp_buffer* buffer;
 	unsigned long flags;
-	int count;
 	int rc;
 
 	spin_lock_irqsave(&sclp_con_lock, flags);
-	buffer = sclp_conbuf;
+	if (sclp_conbuf)
+		list_add_tail(&sclp_conbuf->list, &sclp_con_outqueue);
 	sclp_conbuf = NULL;
-	if (buffer == NULL) {
-		spin_unlock_irqrestore(&sclp_con_lock, flags);
-		return;
-	}
-	list_add_tail(&buffer->list, &sclp_con_outqueue);
-	count = sclp_con_buffer_count++;
+	if (sclp_con_queue_running || sclp_con_suspended)
+		goto out_unlock;
+	if (list_empty(&sclp_con_outqueue))
+		goto out_unlock;
+	buffer = list_first_entry(&sclp_con_outqueue, struct sclp_buffer,
+				  list);
+	sclp_con_queue_running = 1;
 	spin_unlock_irqrestore(&sclp_con_lock, flags);
-	if (count)
-		return;
+
 	rc = sclp_emit_buffer(buffer, sclp_conbuf_callback);
 	if (rc)
 		sclp_conbuf_callback(buffer, rc);
+	return;
+out_unlock:
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
+}
+
+/*
+ * Wait until out queue is empty
+ */
+static void sclp_console_sync_queue(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_con_lock, flags);
+	if (timer_pending(&sclp_con_timer))
+		del_timer_sync(&sclp_con_timer);
+	while (sclp_con_queue_running) {
+		spin_unlock_irqrestore(&sclp_con_lock, flags);
+		sclp_sync_wait();
+		spin_lock_irqsave(&sclp_con_lock, flags);
+	}
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
 }
 
 /*
@@ -123,6 +151,8 @@ sclp_console_write(struct console *console, const char *message,
 		/* make sure we have a console output buffer */
 		if (sclp_conbuf == NULL) {
 			while (list_empty(&sclp_con_pages)) {
+				if (sclp_con_suspended)
+					goto out;
 				spin_unlock_irqrestore(&sclp_con_lock, flags);
 				sclp_sync_wait();
 				spin_lock_irqsave(&sclp_con_lock, flags);
@@ -157,6 +187,7 @@ sclp_console_write(struct console *console, const char *message,
 		sclp_con_timer.expires = jiffies + HZ/10;
 		add_timer(&sclp_con_timer);
 	}
+out:
 	spin_unlock_irqrestore(&sclp_con_lock, flags);
 }
 
@@ -168,30 +199,43 @@ sclp_console_device(struct console *c, int *index)
 }
 
 /*
- * This routine is called from panic when the kernel
- * is going to give up. We have to make sure that all buffers
- * will be flushed to the SCLP.
+ * Make sure that all buffers will be flushed to the SCLP.
  */
 static void
 sclp_console_flush(void)
 {
+	sclp_conbuf_emit();
+	sclp_console_sync_queue();
+}
+
+/*
+ * Resume console: If there are cached messages, emit them.
+ */
+static void sclp_console_resume(void)
+{
 	unsigned long flags;
 
+	spin_lock_irqsave(&sclp_con_lock, flags);
+	sclp_con_suspended = 0;
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
 	sclp_conbuf_emit();
+}
+
+/*
+ * Suspend console: Set suspend flag and flush console
+ */
+static void sclp_console_suspend(void)
+{
+	unsigned long flags;
+
 	spin_lock_irqsave(&sclp_con_lock, flags);
-	if (timer_pending(&sclp_con_timer))
-		del_timer(&sclp_con_timer);
-	while (sclp_con_buffer_count > 0) {
-		spin_unlock_irqrestore(&sclp_con_lock, flags);
-		sclp_sync_wait();
-		spin_lock_irqsave(&sclp_con_lock, flags);
-	}
+	sclp_con_suspended = 1;
 	spin_unlock_irqrestore(&sclp_con_lock, flags);
+	sclp_console_flush();
 }
 
-static int
-sclp_console_notify(struct notifier_block *self,
-			  unsigned long event, void *data)
+static int sclp_console_notify(struct notifier_block *self,
+			       unsigned long event, void *data)
 {
 	sclp_console_flush();
 	return NOTIFY_OK;
@@ -199,7 +243,7 @@ sclp_console_notify(struct notifier_block *self,
 
 static struct notifier_block on_panic_nb = {
 	.notifier_call = sclp_console_notify,
-	.priority = 1,
+	.priority = SCLP_PANIC_PRIO_CLIENT,
 };
 
 static struct notifier_block on_reboot_nb = {
@@ -221,6 +265,22 @@ static struct console sclp_console =
 };
 
 /*
+ * This function is called for SCLP suspend and resume events.
+ */
+void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event)
+{
+	switch (sclp_pm_event) {
+	case SCLP_PM_EVENT_FREEZE:
+		sclp_console_suspend();
+		break;
+	case SCLP_PM_EVENT_RESTORE:
+	case SCLP_PM_EVENT_THAW:
+		sclp_console_resume();
+		break;
+	}
+}
+
+/*
  * called by console_init() in drivers/char/tty_io.c at boot-time.
  */
 static int __init
@@ -243,7 +303,6 @@ sclp_console_init(void)
 	}
 	INIT_LIST_HEAD(&sclp_con_outqueue);
 	spin_lock_init(&sclp_con_lock);
-	sclp_con_buffer_count = 0;
 	sclp_conbuf = NULL;
 	init_timer(&sclp_con_timer);
 
diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c
index 710af42603f..4be63be7344 100644
--- a/drivers/s390/char/sclp_rw.c
+++ b/drivers/s390/char/sclp_rw.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/sclp_rw.c
- *     driver: reading from and writing to system console on S/390 via SCLP
+ * driver: reading from and writing to system console on S/390 via SCLP
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Copyright IBM Corp. 1999, 2009
+ *
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #include <linux/kmod.h>
@@ -26,9 +25,16 @@
  */
 #define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
 
+static void sclp_rw_pm_event(struct sclp_register *reg,
+			     enum sclp_pm_event sclp_pm_event)
+{
+	sclp_console_pm_event(sclp_pm_event);
+}
+
 /* Event type structure for write message and write priority message */
 static struct sclp_register sclp_rw_event = {
-	.send_mask = EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK
+	.send_mask = EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK,
+	.pm_event_fn = sclp_rw_pm_event,
 };
 
 /*
diff --git a/drivers/s390/char/sclp_rw.h b/drivers/s390/char/sclp_rw.h
index 6aa7a6948bc..85f491ea929 100644
--- a/drivers/s390/char/sclp_rw.h
+++ b/drivers/s390/char/sclp_rw.h
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/char/sclp_rw.h
- *    interface to the SCLP-read/write driver
+ * interface to the SCLP-read/write driver
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Copyright IBM Corporation 1999, 2009
+ *
+ * Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #ifndef __SCLP_RW_H__
@@ -93,4 +92,5 @@ void sclp_set_columns(struct sclp_buffer *, unsigned short);
 void sclp_set_htab(struct sclp_buffer *, unsigned short);
 int sclp_chars_in_buffer(struct sclp_buffer *);
 
+void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event);
 #endif	/* __SCLP_RW_H__ */
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index a839aa531d7..5518e24946a 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -1,10 +1,9 @@
 /*
- *  drivers/s390/char/sclp_vt220.c
- *    SCLP VT220 terminal driver.
+ * SCLP VT220 terminal driver.
  *
- *  S390 version
- *    Copyright IBM Corp. 2003,2008
- *    Author(s): Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>
+ * Copyright IBM Corp. 2003, 2009
+ *
+ * Author(s): Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>
  */
 
 #include <linux/module.h>
@@ -69,8 +68,11 @@ static struct list_head sclp_vt220_empty;
 /* List of pending requests */
 static struct list_head sclp_vt220_outqueue;
 
-/* Number of requests in outqueue */
-static int sclp_vt220_outqueue_count;
+/* Suspend mode flag */
+static int sclp_vt220_suspended;
+
+/* Flag that output queue is currently running */
+static int sclp_vt220_queue_running;
 
 /* Timer used for delaying write requests to merge subsequent messages into
  * a single buffer */
@@ -92,6 +94,8 @@ static int __initdata sclp_vt220_init_count;
 static int sclp_vt220_flush_later;
 
 static void sclp_vt220_receiver_fn(struct evbuf_header *evbuf);
+static void sclp_vt220_pm_event_fn(struct sclp_register *reg,
+				   enum sclp_pm_event sclp_pm_event);
 static int __sclp_vt220_emit(struct sclp_vt220_request *request);
 static void sclp_vt220_emit_current(void);
 
@@ -100,7 +104,8 @@ static struct sclp_register sclp_vt220_register = {
 	.send_mask		= EVTYP_VT220MSG_MASK,
 	.receive_mask		= EVTYP_VT220MSG_MASK,
 	.state_change_fn	= NULL,
-	.receiver_fn		= sclp_vt220_receiver_fn
+	.receiver_fn		= sclp_vt220_receiver_fn,
+	.pm_event_fn		= sclp_vt220_pm_event_fn,
 };
 
 
@@ -120,15 +125,19 @@ sclp_vt220_process_queue(struct sclp_vt220_request *request)
 		spin_lock_irqsave(&sclp_vt220_lock, flags);
 		/* Move request from outqueue to empty queue */
 		list_del(&request->list);
-		sclp_vt220_outqueue_count--;
 		list_add_tail((struct list_head *) page, &sclp_vt220_empty);
 		/* Check if there is a pending buffer on the out queue. */
 		request = NULL;
 		if (!list_empty(&sclp_vt220_outqueue))
 			request = list_entry(sclp_vt220_outqueue.next,
 					     struct sclp_vt220_request, list);
+		if (!request || sclp_vt220_suspended) {
+			sclp_vt220_queue_running = 0;
+			spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+			break;
+		}
 		spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-	} while (request && __sclp_vt220_emit(request));
+	} while (__sclp_vt220_emit(request));
 	if (request == NULL && sclp_vt220_flush_later)
 		sclp_vt220_emit_current();
 	/* Check if the tty needs a wake up call */
@@ -212,26 +221,7 @@ __sclp_vt220_emit(struct sclp_vt220_request *request)
 }
 
 /*
- * Queue and emit given request.
- */
-static void
-sclp_vt220_emit(struct sclp_vt220_request *request)
-{
-	unsigned long flags;
-	int count;
-
-	spin_lock_irqsave(&sclp_vt220_lock, flags);
-	list_add_tail(&request->list, &sclp_vt220_outqueue);
-	count = sclp_vt220_outqueue_count++;
-	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-	/* Emit only the first buffer immediately - callback takes care of
-	 * the rest */
-	if (count == 0 && __sclp_vt220_emit(request))
-		sclp_vt220_process_queue(request);
-}
-
-/*
- * Queue and emit current request. Return zero on success, non-zero otherwise.
+ * Queue and emit current request.
  */
 static void
 sclp_vt220_emit_current(void)
@@ -241,22 +231,33 @@ sclp_vt220_emit_current(void)
 	struct sclp_vt220_sccb *sccb;
 
 	spin_lock_irqsave(&sclp_vt220_lock, flags);
-	request = NULL;
-	if (sclp_vt220_current_request != NULL) {
+	if (sclp_vt220_current_request) {
 		sccb = (struct sclp_vt220_sccb *) 
 				sclp_vt220_current_request->sclp_req.sccb;
 		/* Only emit buffers with content */
 		if (sccb->header.length != sizeof(struct sclp_vt220_sccb)) {
-			request = sclp_vt220_current_request;
+			list_add_tail(&sclp_vt220_current_request->list,
+				      &sclp_vt220_outqueue);
 			sclp_vt220_current_request = NULL;
 			if (timer_pending(&sclp_vt220_timer))
 				del_timer(&sclp_vt220_timer);
 		}
 		sclp_vt220_flush_later = 0;
 	}
+	if (sclp_vt220_queue_running || sclp_vt220_suspended)
+		goto out_unlock;
+	if (list_empty(&sclp_vt220_outqueue))
+		goto out_unlock;
+	request = list_first_entry(&sclp_vt220_outqueue,
+				   struct sclp_vt220_request, list);
+	sclp_vt220_queue_running = 1;
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+
+	if (__sclp_vt220_emit(request))
+		sclp_vt220_process_queue(request);
+	return;
+out_unlock:
 	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-	if (request != NULL)
-		sclp_vt220_emit(request);
 }
 
 #define SCLP_NORMAL_WRITE	0x00
@@ -396,7 +397,7 @@ __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule,
 		if (sclp_vt220_current_request == NULL) {
 			while (list_empty(&sclp_vt220_empty)) {
 				spin_unlock_irqrestore(&sclp_vt220_lock, flags);
-				if (may_fail)
+				if (may_fail || sclp_vt220_suspended)
 					goto out;
 				else
 					sclp_sync_wait();
@@ -531,7 +532,7 @@ sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch)
 static void
 sclp_vt220_flush_chars(struct tty_struct *tty)
 {
-	if (sclp_vt220_outqueue_count == 0)
+	if (!sclp_vt220_queue_running)
 		sclp_vt220_emit_current();
 	else
 		sclp_vt220_flush_later = 1;
@@ -635,7 +636,6 @@ static int __init __sclp_vt220_init(int num_pages)
 	init_timer(&sclp_vt220_timer);
 	sclp_vt220_current_request = NULL;
 	sclp_vt220_buffered_chars = 0;
-	sclp_vt220_outqueue_count = 0;
 	sclp_vt220_tty = NULL;
 	sclp_vt220_flush_later = 0;
 
@@ -736,7 +736,7 @@ static void __sclp_vt220_flush_buffer(void)
 	spin_lock_irqsave(&sclp_vt220_lock, flags);
 	if (timer_pending(&sclp_vt220_timer))
 		del_timer(&sclp_vt220_timer);
-	while (sclp_vt220_outqueue_count > 0) {
+	while (sclp_vt220_queue_running) {
 		spin_unlock_irqrestore(&sclp_vt220_lock, flags);
 		sclp_sync_wait();
 		spin_lock_irqsave(&sclp_vt220_lock, flags);
@@ -744,6 +744,46 @@ static void __sclp_vt220_flush_buffer(void)
 	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
 }
 
+/*
+ * Resume console: If there are cached messages, emit them.
+ */
+static void sclp_vt220_resume(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	sclp_vt220_suspended = 0;
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	sclp_vt220_emit_current();
+}
+
+/*
+ * Suspend console: Set suspend flag and flush console
+ */
+static void sclp_vt220_suspend(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	sclp_vt220_suspended = 1;
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	__sclp_vt220_flush_buffer();
+}
+
+static void sclp_vt220_pm_event_fn(struct sclp_register *reg,
+				   enum sclp_pm_event sclp_pm_event)
+{
+	switch (sclp_pm_event) {
+	case SCLP_PM_EVENT_FREEZE:
+		sclp_vt220_suspend();
+		break;
+	case SCLP_PM_EVENT_RESTORE:
+	case SCLP_PM_EVENT_THAW:
+		sclp_vt220_resume();
+		break;
+	}
+}
+
 static int
 sclp_vt220_notify(struct notifier_block *self,
 			  unsigned long event, void *data)
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index 5469e099597..a2633377470 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -3,7 +3,7 @@
  *    tape device driver for 3480/3490E/3590 tapes.
  *
  *  S390 and zSeries version
- *    Copyright IBM Corp. 2001,2006
+ *    Copyright IBM Corp. 2001, 2009
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -286,6 +286,7 @@ extern void tape_state_set(struct tape_device *, enum tape_state);
 
 extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
 extern int tape_generic_offline(struct ccw_device *);
+extern int tape_generic_pm_suspend(struct ccw_device *);
 
 /* Externals from tape_devmap.c */
 extern int tape_generic_probe(struct ccw_device *);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 2d00a383a47..5a519fac37b 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -2,7 +2,7 @@
  *  drivers/s390/char/tape_34xx.c
  *    tape device discipline for 3480/3490 tapes.
  *
- *    Copyright (C) IBM Corp. 2001,2006
+ *    Copyright IBM Corp. 2001, 2009
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -1289,7 +1289,7 @@ static int
 tape_34xx_online(struct ccw_device *cdev)
 {
 	return tape_generic_online(
-		cdev->dev.driver_data,
+		dev_get_drvdata(&cdev->dev),
 		&tape_discipline_34xx
 	);
 }
@@ -1302,6 +1302,7 @@ static struct ccw_driver tape_34xx_driver = {
 	.remove = tape_generic_remove,
 	.set_online = tape_34xx_online,
 	.set_offline = tape_generic_offline,
+	.freeze = tape_generic_pm_suspend,
 };
 
 static int
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index c453b2f3e9f..418f72dd39b 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -2,7 +2,7 @@
  *  drivers/s390/char/tape_3590.c
  *    tape device discipline for 3590 tapes.
  *
- *    Copyright IBM Corp. 2001,2006
+ *    Copyright IBM Corp. 2001, 2009
  *    Author(s): Stefan Bader <shbader@de.ibm.com>
  *		 Michael Holzheu <holzheu@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -1703,7 +1703,7 @@ static struct ccw_device_id tape_3590_ids[] = {
 static int
 tape_3590_online(struct ccw_device *cdev)
 {
-	return tape_generic_online(cdev->dev.driver_data,
+	return tape_generic_online(dev_get_drvdata(&cdev->dev),
 				   &tape_discipline_3590);
 }
 
@@ -1715,6 +1715,7 @@ static struct ccw_driver tape_3590_driver = {
 	.remove = tape_generic_remove,
 	.set_offline = tape_generic_offline,
 	.set_online = tape_3590_online,
+	.freeze = tape_generic_pm_suspend,
 };
 
 /*
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 8a109f3b69c..595aa04cfd0 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -3,7 +3,7 @@
  *    basic function of the tape device driver
  *
  *  S390 and zSeries version
- *    Copyright IBM Corp. 2001,2006
+ *    Copyright IBM Corp. 2001, 2009
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *		 Michael Holzheu <holzheu@de.ibm.com>
  *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
@@ -92,7 +92,7 @@ tape_medium_state_show(struct device *dev, struct device_attribute *attr, char *
 {
 	struct tape_device *tdev;
 
-	tdev = (struct tape_device *) dev->driver_data;
+	tdev = dev_get_drvdata(dev);
 	return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->medium_state);
 }
 
@@ -104,7 +104,7 @@ tape_first_minor_show(struct device *dev, struct device_attribute *attr, char *b
 {
 	struct tape_device *tdev;
 
-	tdev = (struct tape_device *) dev->driver_data;
+	tdev = dev_get_drvdata(dev);
 	return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->first_minor);
 }
 
@@ -116,7 +116,7 @@ tape_state_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct tape_device *tdev;
 
-	tdev = (struct tape_device *) dev->driver_data;
+	tdev = dev_get_drvdata(dev);
 	return scnprintf(buf, PAGE_SIZE, "%s\n", (tdev->first_minor < 0) ?
 		"OFFLINE" : tape_state_verbose[tdev->tape_state]);
 }
@@ -130,7 +130,7 @@ tape_operation_show(struct device *dev, struct device_attribute *attr, char *buf
 	struct tape_device *tdev;
 	ssize_t rc;
 
-	tdev = (struct tape_device *) dev->driver_data;
+	tdev = dev_get_drvdata(dev);
 	if (tdev->first_minor < 0)
 		return scnprintf(buf, PAGE_SIZE, "N/A\n");
 
@@ -156,7 +156,7 @@ tape_blocksize_show(struct device *dev, struct device_attribute *attr, char *buf
 {
 	struct tape_device *tdev;
 
-	tdev = (struct tape_device *) dev->driver_data;
+	tdev = dev_get_drvdata(dev);
 
 	return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->char_data.block_size);
 }
@@ -380,6 +380,55 @@ tape_cleanup_device(struct tape_device *device)
 }
 
 /*
+ * Suspend device.
+ *
+ * Called by the common I/O layer if the drive should be suspended on user
+ * request. We refuse to suspend if the device is loaded or in use for the
+ * following reason:
+ * While the Linux guest is suspended, it might be logged off which causes
+ * devices to be detached. Tape devices are automatically rewound and unloaded
+ * during DETACH processing (unless the tape device was attached with the
+ * NOASSIGN or MULTIUSER option). After rewind/unload, there is no way to
+ * resume the original state of the tape device, since we would need to
+ * manually re-load the cartridge which was active at suspend time.
+ */
+int tape_generic_pm_suspend(struct ccw_device *cdev)
+{
+	struct tape_device *device;
+
+	device = cdev->dev.driver_data;
+	if (!device) {
+		return -ENODEV;
+	}
+
+	DBF_LH(3, "(%08x): tape_generic_pm_suspend(%p)\n",
+		device->cdev_id, device);
+
+	if (device->medium_state != MS_UNLOADED) {
+		pr_err("A cartridge is loaded in tape device %s, "
+		       "refusing to suspend\n", dev_name(&cdev->dev));
+		return -EBUSY;
+	}
+
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	switch (device->tape_state) {
+		case TS_INIT:
+		case TS_NOT_OPER:
+		case TS_UNUSED:
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			break;
+		default:
+			pr_err("Tape device %s is busy, refusing to "
+			       "suspend\n", dev_name(&cdev->dev));
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			return -EBUSY;
+	}
+
+	DBF_LH(3, "(%08x): Drive suspended.\n", device->cdev_id);
+	return 0;
+}
+
+/*
  * Set device offline.
  *
  * Called by the common I/O layer if the drive should set offline on user
@@ -391,7 +440,7 @@ tape_generic_offline(struct ccw_device *cdev)
 {
 	struct tape_device *device;
 
-	device = cdev->dev.driver_data;
+	device = dev_get_drvdata(&cdev->dev);
 	if (!device) {
 		return -ENODEV;
 	}
@@ -534,7 +583,7 @@ tape_generic_probe(struct ccw_device *cdev)
 		tape_put_device(device);
 		return ret;
 	}
-	cdev->dev.driver_data = device;
+	dev_set_drvdata(&cdev->dev, device);
 	cdev->handler = __tape_do_irq;
 	device->cdev = cdev;
 	ccw_device_get_id(cdev, &dev_id);
@@ -573,7 +622,7 @@ tape_generic_remove(struct ccw_device *cdev)
 {
 	struct tape_device *	device;
 
-	device = cdev->dev.driver_data;
+	device = dev_get_drvdata(&cdev->dev);
 	if (!device) {
 		return;
 	}
@@ -613,9 +662,9 @@ tape_generic_remove(struct ccw_device *cdev)
 			tape_cleanup_device(device);
 	}
 
-	if (cdev->dev.driver_data != NULL) {
+	if (!dev_get_drvdata(&cdev->dev)) {
 		sysfs_remove_group(&cdev->dev.kobj, &tape_attr_group);
-		cdev->dev.driver_data = tape_put_device(cdev->dev.driver_data);
+		dev_set_drvdata(&cdev->dev, tape_put_device(dev_get_drvdata(&cdev->dev)));
 	}
 }
 
@@ -1011,7 +1060,7 @@ __tape_do_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	struct tape_request *request;
 	int rc;
 
-	device = (struct tape_device *) cdev->dev.driver_data;
+	device = dev_get_drvdata(&cdev->dev);
 	if (device == NULL) {
 		return;
 	}
@@ -1273,6 +1322,7 @@ EXPORT_SYMBOL(tape_generic_remove);
 EXPORT_SYMBOL(tape_generic_probe);
 EXPORT_SYMBOL(tape_generic_online);
 EXPORT_SYMBOL(tape_generic_offline);
+EXPORT_SYMBOL(tape_generic_pm_suspend);
 EXPORT_SYMBOL(tape_put_device);
 EXPORT_SYMBOL(tape_get_device_reference);
 EXPORT_SYMBOL(tape_state_verbose);
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index d8a2289fcb6..411cfa3c771 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -3,7 +3,7 @@
  *	character device driver for reading z/VM system service records
  *
  *
- *	Copyright 2004 IBM Corporation
+ *	Copyright IBM Corp. 2004, 2009
  *	character device driver for reading z/VM system service records,
  *	Version 1.0
  *	Author(s): Xenia Tkatschow <xenia@us.ibm.com>
@@ -504,7 +504,7 @@ static ssize_t vmlogrdr_autopurge_store(struct device * dev,
 					struct device_attribute *attr,
 					const char * buf, size_t count)
 {
-	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
 	ssize_t ret = count;
 
 	switch (buf[0]) {
@@ -525,7 +525,7 @@ static ssize_t vmlogrdr_autopurge_show(struct device *dev,
 				       struct device_attribute *attr,
 				       char *buf)
 {
-	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
 	return sprintf(buf, "%u\n", priv->autopurge);
 }
 
@@ -541,7 +541,7 @@ static ssize_t vmlogrdr_purge_store(struct device * dev,
 
 	char cp_command[80];
 	char cp_response[80];
-	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
 
 	if (buf[0] != '1')
 		return -EINVAL;
@@ -578,7 +578,7 @@ static ssize_t vmlogrdr_autorecording_store(struct device *dev,
 					    struct device_attribute *attr,
 					    const char *buf, size_t count)
 {
-	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
 	ssize_t ret = count;
 
 	switch (buf[0]) {
@@ -599,7 +599,7 @@ static ssize_t vmlogrdr_autorecording_show(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
 	return sprintf(buf, "%u\n", priv->autorecording);
 }
 
@@ -612,7 +612,7 @@ static ssize_t vmlogrdr_recording_store(struct device * dev,
 					struct device_attribute *attr,
 					const char * buf, size_t count)
 {
-	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
 	ssize_t ret;
 
 	switch (buf[0]) {
@@ -660,6 +660,29 @@ static struct attribute *vmlogrdr_attrs[] = {
 	NULL,
 };
 
+static int vmlogrdr_pm_prepare(struct device *dev)
+{
+	int rc;
+	struct vmlogrdr_priv_t *priv = dev->driver_data;
+
+	rc = 0;
+	if (priv) {
+		spin_lock_bh(&priv->priv_lock);
+		if (priv->dev_in_use)
+			rc = -EBUSY;
+		spin_unlock_bh(&priv->priv_lock);
+	}
+	if (rc)
+		pr_err("vmlogrdr: device %s is busy. Refuse to suspend.\n",
+		       dev_name(dev));
+	return rc;
+}
+
+
+static struct dev_pm_ops vmlogrdr_pm_ops = {
+	.prepare = vmlogrdr_pm_prepare,
+};
+
 static struct attribute_group vmlogrdr_attr_group = {
 	.attrs = vmlogrdr_attrs,
 };
@@ -668,6 +691,7 @@ static struct class *vmlogrdr_class;
 static struct device_driver vmlogrdr_driver = {
 	.name = "vmlogrdr",
 	.bus  = &iucv_bus,
+	.pm = &vmlogrdr_pm_ops,
 };
 
 
@@ -729,6 +753,7 @@ static int vmlogrdr_register_device(struct vmlogrdr_priv_t *priv)
 		dev->bus = &iucv_bus;
 		dev->parent = iucv_root;
 		dev->driver = &vmlogrdr_driver;
+		dev->driver_data = priv;
 		/*
 		 * The release function could be called after the
 		 * module has been unloaded. It's _only_ task is to
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 5dcef81fc9d..7d9e67cb647 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -2,7 +2,7 @@
  * Linux driver for System z and s390 unit record devices
  * (z/VM virtual punch, reader, printer)
  *
- * Copyright IBM Corp. 2001, 2007
+ * Copyright IBM Corp. 2001, 2009
  * Authors: Malcolm Beattie <beattiem@uk.ibm.com>
  *	    Michael Holzheu <holzheu@de.ibm.com>
  *	    Frank Munzert <munzert@de.ibm.com>
@@ -60,6 +60,7 @@ static int ur_probe(struct ccw_device *cdev);
 static void ur_remove(struct ccw_device *cdev);
 static int ur_set_online(struct ccw_device *cdev);
 static int ur_set_offline(struct ccw_device *cdev);
+static int ur_pm_suspend(struct ccw_device *cdev);
 
 static struct ccw_driver ur_driver = {
 	.name		= "vmur",
@@ -69,6 +70,7 @@ static struct ccw_driver ur_driver = {
 	.remove		= ur_remove,
 	.set_online	= ur_set_online,
 	.set_offline	= ur_set_offline,
+	.freeze		= ur_pm_suspend,
 };
 
 static DEFINE_MUTEX(vmur_mutex);
@@ -78,11 +80,11 @@ static DEFINE_MUTEX(vmur_mutex);
  *
  * Each ur device (urd) contains a reference to its corresponding ccw device
  * (cdev) using the urd->cdev pointer. Each ccw device has a reference to the
- * ur device using the cdev->dev.driver_data pointer.
+ * ur device using dev_get_drvdata(&cdev->dev) pointer.
  *
  * urd references:
  * - ur_probe gets a urd reference, ur_remove drops the reference
- *   (cdev->dev.driver_data)
+ *   dev_get_drvdata(&cdev->dev)
  * - ur_open gets a urd reference, ur_relase drops the reference
  *   (urf->urd)
  *
@@ -90,7 +92,7 @@ static DEFINE_MUTEX(vmur_mutex);
  * - urdev_alloc get a cdev reference (urd->cdev)
  * - urdev_free drops the cdev reference (urd->cdev)
  *
- * Setting and clearing of cdev->dev.driver_data is protected by the ccwdev lock
+ * Setting and clearing of dev_get_drvdata(&cdev->dev) is protected by the ccwdev lock
  */
 static struct urdev *urdev_alloc(struct ccw_device *cdev)
 {
@@ -129,7 +131,7 @@ static struct urdev *urdev_get_from_cdev(struct ccw_device *cdev)
 	unsigned long flags;
 
 	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
-	urd = cdev->dev.driver_data;
+	urd = dev_get_drvdata(&cdev->dev);
 	if (urd)
 		urdev_get(urd);
 	spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
@@ -158,6 +160,28 @@ static void urdev_put(struct urdev *urd)
 }
 
 /*
+ * State and contents of ur devices can be changed by class D users issuing
+ * CP commands such as PURGE or TRANSFER, while the Linux guest is suspended.
+ * Also the Linux guest might be logged off, which causes all active spool
+ * files to be closed.
+ * So we cannot guarantee that spool files are still the same when the Linux
+ * guest is resumed. In order to avoid unpredictable results at resume time
+ * we simply refuse to suspend if a ur device node is open.
+ */
+static int ur_pm_suspend(struct ccw_device *cdev)
+{
+	struct urdev *urd = cdev->dev.driver_data;
+
+	TRACE("ur_pm_suspend: cdev=%p\n", cdev);
+	if (urd->open_flag) {
+		pr_err("Unit record device %s is busy, %s refusing to "
+		       "suspend.\n", dev_name(&cdev->dev), ur_banner);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+/*
  * Low-level functions to do I/O to a ur device.
  *     alloc_chan_prog
  *     free_chan_prog
@@ -286,7 +310,7 @@ static void ur_int_handler(struct ccw_device *cdev, unsigned long intparm,
 		TRACE("ur_int_handler: unsolicited interrupt\n");
 		return;
 	}
-	urd = cdev->dev.driver_data;
+	urd = dev_get_drvdata(&cdev->dev);
 	BUG_ON(!urd);
 	/* On special conditions irb is an error pointer */
 	if (IS_ERR(irb))
@@ -832,7 +856,7 @@ static int ur_probe(struct ccw_device *cdev)
 		goto fail_remove_attr;
 	}
 	spin_lock_irq(get_ccwdev_lock(cdev));
-	cdev->dev.driver_data = urd;
+	dev_set_drvdata(&cdev->dev, urd);
 	spin_unlock_irq(get_ccwdev_lock(cdev));
 
 	mutex_unlock(&vmur_mutex);
@@ -972,8 +996,8 @@ static void ur_remove(struct ccw_device *cdev)
 	ur_remove_attributes(&cdev->dev);
 
 	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
-	urdev_put(cdev->dev.driver_data);
-	cdev->dev.driver_data = NULL;
+	urdev_put(dev_get_drvdata(&cdev->dev));
+	dev_set_drvdata(&cdev->dev, NULL);
 	spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
 
 	mutex_unlock(&vmur_mutex);
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index 21a2a829bf4..cb7854c10c0 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -1,17 +1,23 @@
 /*
  * Watchdog implementation based on z/VM Watchdog Timer API
  *
+ * Copyright IBM Corp. 2004,2009
+ *
  * The user space watchdog daemon can use this driver as
  * /dev/vmwatchdog to have z/VM execute the specified CP
  * command when the timeout expires. The default command is
  * "IPL", which which cause an immediate reboot.
  */
+#define KMSG_COMPONENT "vmwatchdog"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/suspend.h>
 #include <linux/watchdog.h>
 #include <linux/smp_lock.h>
 
@@ -43,6 +49,9 @@ static unsigned int vmwdt_interval = 60;
 static unsigned long vmwdt_is_open;
 static int vmwdt_expect_close;
 
+#define VMWDT_OPEN	0	/* devnode is open or suspend in progress */
+#define VMWDT_RUNNING	1	/* The watchdog is armed */
+
 enum vmwdt_func {
 	/* function codes */
 	wdt_init   = 0,
@@ -92,6 +101,7 @@ static int vmwdt_keepalive(void)
 	EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
 
 	func = vmwdt_conceal ? (wdt_init | wdt_conceal) : wdt_init;
+	set_bit(VMWDT_RUNNING, &vmwdt_is_open);
 	ret = __diag288(func, vmwdt_interval, ebc_cmd, len);
 	WARN_ON(ret != 0);
 	kfree(ebc_cmd);
@@ -102,6 +112,7 @@ static int vmwdt_disable(void)
 {
 	int ret = __diag288(wdt_cancel, 0, "", 0);
 	WARN_ON(ret != 0);
+	clear_bit(VMWDT_RUNNING, &vmwdt_is_open);
 	return ret;
 }
 
@@ -123,13 +134,13 @@ static int vmwdt_open(struct inode *i, struct file *f)
 {
 	int ret;
 	lock_kernel();
-	if (test_and_set_bit(0, &vmwdt_is_open)) {
+	if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
 		unlock_kernel();
 		return -EBUSY;
 	}
 	ret = vmwdt_keepalive();
 	if (ret)
-		clear_bit(0, &vmwdt_is_open);
+		clear_bit(VMWDT_OPEN, &vmwdt_is_open);
 	unlock_kernel();
 	return ret ? ret : nonseekable_open(i, f);
 }
@@ -139,7 +150,7 @@ static int vmwdt_close(struct inode *i, struct file *f)
 	if (vmwdt_expect_close == 42)
 		vmwdt_disable();
 	vmwdt_expect_close = 0;
-	clear_bit(0, &vmwdt_is_open);
+	clear_bit(VMWDT_OPEN, &vmwdt_is_open);
 	return 0;
 }
 
@@ -223,6 +234,57 @@ static ssize_t vmwdt_write(struct file *f, const char __user *buf,
 	return count;
 }
 
+static int vmwdt_resume(void)
+{
+	clear_bit(VMWDT_OPEN, &vmwdt_is_open);
+	return NOTIFY_DONE;
+}
+
+/*
+ * It makes no sense to go into suspend while the watchdog is running.
+ * Depending on the memory size, the watchdog might trigger, while we
+ * are still saving the memory.
+ * We reuse the open flag to ensure that suspend and watchdog open are
+ * exclusive operations
+ */
+static int vmwdt_suspend(void)
+{
+	if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
+		pr_err("The watchdog is in use. "
+			"This prevents hibernation or suspend.\n");
+		return NOTIFY_BAD;
+	}
+	if (test_bit(VMWDT_RUNNING, &vmwdt_is_open)) {
+		clear_bit(VMWDT_OPEN, &vmwdt_is_open);
+		pr_err("The watchdog is running. "
+			"This prevents hibernation or suspend.\n");
+		return NOTIFY_BAD;
+	}
+	return NOTIFY_DONE;
+}
+
+/*
+ * This function is called for suspend and resume.
+ */
+static int vmwdt_power_event(struct notifier_block *this, unsigned long event,
+			     void *ptr)
+{
+	switch (event) {
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		return vmwdt_resume();
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		return vmwdt_suspend();
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static struct notifier_block vmwdt_power_notifier = {
+	.notifier_call = vmwdt_power_event,
+};
+
 static const struct file_operations vmwdt_fops = {
 	.open    = &vmwdt_open,
 	.release = &vmwdt_close,
@@ -244,12 +306,21 @@ static int __init vmwdt_init(void)
 	ret = vmwdt_probe();
 	if (ret)
 		return ret;
-	return misc_register(&vmwdt_dev);
+	ret = register_pm_notifier(&vmwdt_power_notifier);
+	if (ret)
+		return ret;
+	ret = misc_register(&vmwdt_dev);
+	if (ret) {
+		unregister_pm_notifier(&vmwdt_power_notifier);
+		return ret;
+	}
+	return 0;
 }
 module_init(vmwdt_init);
 
 static void __exit vmwdt_exit(void)
 {
-	WARN_ON(misc_deregister(&vmwdt_dev) != 0);
+	unregister_pm_notifier(&vmwdt_power_notifier);
+	misc_deregister(&vmwdt_dev);
 }
 module_exit(vmwdt_exit);
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 22ce765d537..a5a62f1f774 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -1,11 +1,10 @@
 /*
- *  drivers/s390/cio/ccwgroup.c
  *  bus driver for ccwgroup
  *
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
- *                       IBM Corporation
- *    Author(s): Arnd Bergmann (arndb@de.ibm.com)
- *               Cornelia Huck (cornelia.huck@de.ibm.com)
+ *  Copyright IBM Corp. 2002, 2009
+ *
+ *  Author(s): Arnd Bergmann (arndb@de.ibm.com)
+ *	       Cornelia Huck (cornelia.huck@de.ibm.com)
  */
 #include <linux/module.h>
 #include <linux/errno.h>
@@ -501,6 +500,74 @@ static void ccwgroup_shutdown(struct device *dev)
 		gdrv->shutdown(gdev);
 }
 
+static int ccwgroup_pm_prepare(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+
+	/* Fail while device is being set online/offline. */
+	if (atomic_read(&gdev->onoff))
+		return -EAGAIN;
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return 0;
+
+	return gdrv->prepare ? gdrv->prepare(gdev) : 0;
+}
+
+static void ccwgroup_pm_complete(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(dev->driver);
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return;
+
+	if (gdrv->complete)
+		gdrv->complete(gdev);
+}
+
+static int ccwgroup_pm_freeze(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return 0;
+
+	return gdrv->freeze ? gdrv->freeze(gdev) : 0;
+}
+
+static int ccwgroup_pm_thaw(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return 0;
+
+	return gdrv->thaw ? gdrv->thaw(gdev) : 0;
+}
+
+static int ccwgroup_pm_restore(struct device *dev)
+{
+	struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
+	struct ccwgroup_driver *gdrv = to_ccwgroupdrv(gdev->dev.driver);
+
+	if (!gdev->dev.driver || gdev->state != CCWGROUP_ONLINE)
+		return 0;
+
+	return gdrv->restore ? gdrv->restore(gdev) : 0;
+}
+
+static struct dev_pm_ops ccwgroup_pm_ops = {
+	.prepare = ccwgroup_pm_prepare,
+	.complete = ccwgroup_pm_complete,
+	.freeze = ccwgroup_pm_freeze,
+	.thaw = ccwgroup_pm_thaw,
+	.restore = ccwgroup_pm_restore,
+};
+
 static struct bus_type ccwgroup_bus_type = {
 	.name   = "ccwgroup",
 	.match  = ccwgroup_bus_match,
@@ -508,6 +575,7 @@ static struct bus_type ccwgroup_bus_type = {
 	.probe  = ccwgroup_probe,
 	.remove = ccwgroup_remove,
 	.shutdown = ccwgroup_shutdown,
+	.pm = &ccwgroup_pm_ops,
 };
 
 
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 883f16f96f2..1ecd3e56764 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -549,8 +549,7 @@ cleanup:
 	return ret;
 }
 
-static int
-__chsc_do_secm(struct channel_subsystem *css, int enable, void *page)
+int __chsc_do_secm(struct channel_subsystem *css, int enable, void *page)
 {
 	struct {
 		struct chsc_header request;
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index ba59bceace9..425e8f89a6c 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -90,6 +90,7 @@ extern void chsc_free_sei_area(void);
 extern int chsc_enable_facility(int);
 struct channel_subsystem;
 extern int chsc_secm(struct channel_subsystem *, int);
+int __chsc_do_secm(struct channel_subsystem *css, int enable, void *page);
 
 int chsc_chp_vary(struct chp_id chpid, int on);
 int chsc_determine_channel_path_desc(struct chp_id chpid, int fmt, int rfmt,
diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c
index 93eca1731b8..cc5144b6f9d 100644
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -1,7 +1,8 @@
 /*
  * Driver for s390 chsc subchannels
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008, 2009
+ *
  * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
  *
  */
@@ -112,6 +113,31 @@ static void chsc_subchannel_shutdown(struct subchannel *sch)
 	cio_disable_subchannel(sch);
 }
 
+static int chsc_subchannel_prepare(struct subchannel *sch)
+{
+	int cc;
+	struct schib schib;
+	/*
+	 * Don't allow suspend while the subchannel is not idle
+	 * since we don't have a way to clear the subchannel and
+	 * cannot disable it with a request running.
+	 */
+	cc = stsch(sch->schid, &schib);
+	if (!cc && scsw_stctl(&schib.scsw))
+		return -EAGAIN;
+	return 0;
+}
+
+static int chsc_subchannel_freeze(struct subchannel *sch)
+{
+	return cio_disable_subchannel(sch);
+}
+
+static int chsc_subchannel_restore(struct subchannel *sch)
+{
+	return cio_enable_subchannel(sch, (u32)(unsigned long)sch);
+}
+
 static struct css_device_id chsc_subchannel_ids[] = {
 	{ .match_flags = 0x1, .type =SUBCHANNEL_TYPE_CHSC, },
 	{ /* end of list */ },
@@ -125,6 +151,10 @@ static struct css_driver chsc_subchannel_driver = {
 	.probe = chsc_subchannel_probe,
 	.remove = chsc_subchannel_remove,
 	.shutdown = chsc_subchannel_shutdown,
+	.prepare = chsc_subchannel_prepare,
+	.freeze = chsc_subchannel_freeze,
+	.thaw = chsc_subchannel_restore,
+	.restore = chsc_subchannel_restore,
 	.name = "chsc_subchannel",
 };
 
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index dc98b2c6386..30f51611130 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -1204,6 +1204,11 @@ static ssize_t cmb_enable_store(struct device *dev,
 
 DEVICE_ATTR(cmb_enable, 0644, cmb_enable_show, cmb_enable_store);
 
+int ccw_set_cmf(struct ccw_device *cdev, int enable)
+{
+	return cmbops->set(cdev, enable ? 2 : 0);
+}
+
 /**
  * enable_cmf() - switch on the channel measurement for a specific device
  *  @cdev:	The ccw device to be enabled
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 0085d890179..85d43c6bcb6 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -1,10 +1,10 @@
 /*
- *  drivers/s390/cio/css.c
- *  driver for channel subsystem
+ * driver for channel subsystem
  *
- *    Copyright IBM Corp. 2002,2008
- *    Author(s): Arnd Bergmann (arndb@de.ibm.com)
- *		 Cornelia Huck (cornelia.huck@de.ibm.com)
+ * Copyright IBM Corp. 2002, 2009
+ *
+ * Author(s): Arnd Bergmann (arndb@de.ibm.com)
+ *	      Cornelia Huck (cornelia.huck@de.ibm.com)
  */
 
 #define KMSG_COMPONENT "cio"
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/reboot.h>
+#include <linux/suspend.h>
 #include <asm/isc.h>
 #include <asm/crw.h>
 
@@ -780,6 +781,79 @@ static struct notifier_block css_reboot_notifier = {
 };
 
 /*
+ * Since the css devices are neither on a bus nor have a class
+ * nor have a special device type, we cannot stop/restart channel
+ * path measurements via the normal suspend/resume callbacks, but have
+ * to use notifiers.
+ */
+static int css_power_event(struct notifier_block *this, unsigned long event,
+			   void *ptr)
+{
+	void *secm_area;
+	int ret, i;
+
+	switch (event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		ret = NOTIFY_DONE;
+		for (i = 0; i <= __MAX_CSSID; i++) {
+			struct channel_subsystem *css;
+
+			css = channel_subsystems[i];
+			mutex_lock(&css->mutex);
+			if (!css->cm_enabled) {
+				mutex_unlock(&css->mutex);
+				continue;
+			}
+			secm_area = (void *)get_zeroed_page(GFP_KERNEL |
+							    GFP_DMA);
+			if (secm_area) {
+				if (__chsc_do_secm(css, 0, secm_area))
+					ret = NOTIFY_BAD;
+				free_page((unsigned long)secm_area);
+			} else
+				ret = NOTIFY_BAD;
+
+			mutex_unlock(&css->mutex);
+		}
+		break;
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		ret = NOTIFY_DONE;
+		for (i = 0; i <= __MAX_CSSID; i++) {
+			struct channel_subsystem *css;
+
+			css = channel_subsystems[i];
+			mutex_lock(&css->mutex);
+			if (!css->cm_enabled) {
+				mutex_unlock(&css->mutex);
+				continue;
+			}
+			secm_area = (void *)get_zeroed_page(GFP_KERNEL |
+							    GFP_DMA);
+			if (secm_area) {
+				if (__chsc_do_secm(css, 1, secm_area))
+					ret = NOTIFY_BAD;
+				free_page((unsigned long)secm_area);
+			} else
+				ret = NOTIFY_BAD;
+
+			mutex_unlock(&css->mutex);
+		}
+		/* search for subchannels, which appeared during hibernation */
+		css_schedule_reprobe();
+		break;
+	default:
+		ret = NOTIFY_DONE;
+	}
+	return ret;
+
+}
+static struct notifier_block css_power_notifier = {
+	.notifier_call = css_power_event,
+};
+
+/*
  * Now that the driver core is running, we can setup our channel subsystem.
  * The struct subchannel's are created during probing (except for the
  * static console subchannel).
@@ -852,6 +926,11 @@ init_channel_subsystem (void)
 	ret = register_reboot_notifier(&css_reboot_notifier);
 	if (ret)
 		goto out_unregister;
+	ret = register_pm_notifier(&css_power_notifier);
+	if (ret) {
+		unregister_reboot_notifier(&css_reboot_notifier);
+		goto out_unregister;
+	}
 	css_init_done = 1;
 
 	/* Enable default isc for I/O subchannels. */
@@ -953,6 +1032,73 @@ static int css_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return ret;
 }
 
+static int css_pm_prepare(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (mutex_is_locked(&sch->reg_mutex))
+		return -EAGAIN;
+	if (!sch->dev.driver)
+		return 0;
+	drv = to_cssdriver(sch->dev.driver);
+	/* Notify drivers that they may not register children. */
+	return drv->prepare ? drv->prepare(sch) : 0;
+}
+
+static void css_pm_complete(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (!sch->dev.driver)
+		return;
+	drv = to_cssdriver(sch->dev.driver);
+	if (drv->complete)
+		drv->complete(sch);
+}
+
+static int css_pm_freeze(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (!sch->dev.driver)
+		return 0;
+	drv = to_cssdriver(sch->dev.driver);
+	return drv->freeze ? drv->freeze(sch) : 0;
+}
+
+static int css_pm_thaw(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (!sch->dev.driver)
+		return 0;
+	drv = to_cssdriver(sch->dev.driver);
+	return drv->thaw ? drv->thaw(sch) : 0;
+}
+
+static int css_pm_restore(struct device *dev)
+{
+	struct subchannel *sch = to_subchannel(dev);
+	struct css_driver *drv;
+
+	if (!sch->dev.driver)
+		return 0;
+	drv = to_cssdriver(sch->dev.driver);
+	return drv->restore ? drv->restore(sch) : 0;
+}
+
+static struct dev_pm_ops css_pm_ops = {
+	.prepare = css_pm_prepare,
+	.complete = css_pm_complete,
+	.freeze = css_pm_freeze,
+	.thaw = css_pm_thaw,
+	.restore = css_pm_restore,
+};
+
 struct bus_type css_bus_type = {
 	.name     = "css",
 	.match    = css_bus_match,
@@ -960,6 +1106,7 @@ struct bus_type css_bus_type = {
 	.remove   = css_remove,
 	.shutdown = css_shutdown,
 	.uevent   = css_uevent,
+	.pm = &css_pm_ops,
 };
 
 /**
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index 57ebf120f82..9763eeec745 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -70,6 +70,11 @@ struct chp_link;
  * @probe: function called on probe
  * @remove: function called on remove
  * @shutdown: called at device shutdown
+ * @prepare: prepare for pm state transition
+ * @complete: undo work done in @prepare
+ * @freeze: callback for freezing during hibernation snapshotting
+ * @thaw: undo work done in @freeze
+ * @restore: callback for restoring after hibernation
  * @name: name of the device driver
  */
 struct css_driver {
@@ -82,6 +87,11 @@ struct css_driver {
 	int (*probe)(struct subchannel *);
 	int (*remove)(struct subchannel *);
 	void (*shutdown)(struct subchannel *);
+	int (*prepare) (struct subchannel *);
+	void (*complete) (struct subchannel *);
+	int (*freeze)(struct subchannel *);
+	int (*thaw) (struct subchannel *);
+	int (*restore)(struct subchannel *);
 	const char *name;
 };
 
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 35441fa16be..3c57c1a18bb 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -138,6 +138,19 @@ static struct css_device_id io_subchannel_ids[] = {
 };
 MODULE_DEVICE_TABLE(css, io_subchannel_ids);
 
+static int io_subchannel_prepare(struct subchannel *sch)
+{
+	struct ccw_device *cdev;
+	/*
+	 * Don't allow suspend while a ccw device registration
+	 * is still outstanding.
+	 */
+	cdev = sch_get_cdev(sch);
+	if (cdev && !device_is_registered(&cdev->dev))
+		return -EAGAIN;
+	return 0;
+}
+
 static struct css_driver io_subchannel_driver = {
 	.owner = THIS_MODULE,
 	.subchannel_type = io_subchannel_ids,
@@ -148,6 +161,7 @@ static struct css_driver io_subchannel_driver = {
 	.probe = io_subchannel_probe,
 	.remove = io_subchannel_remove,
 	.shutdown = io_subchannel_shutdown,
+	.prepare = io_subchannel_prepare,
 };
 
 struct workqueue_struct *ccw_device_work;
@@ -1775,6 +1789,15 @@ ccw_device_probe_console(void)
 	return &console_cdev;
 }
 
+static int ccw_device_pm_restore(struct device *dev);
+
+int ccw_device_force_console(void)
+{
+	if (!console_cdev_in_use)
+		return -ENODEV;
+	return ccw_device_pm_restore(&console_cdev.dev);
+}
+EXPORT_SYMBOL_GPL(ccw_device_force_console);
 
 const char *cio_get_console_cdev_name(struct subchannel *sch)
 {
@@ -1895,6 +1918,242 @@ static void ccw_device_shutdown(struct device *dev)
 	disable_cmf(cdev);
 }
 
+static int ccw_device_pm_prepare(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+
+	if (work_pending(&cdev->private->kick_work))
+		return -EAGAIN;
+	/* Fail while device is being set online/offline. */
+	if (atomic_read(&cdev->private->onoff))
+		return -EAGAIN;
+
+	if (cdev->online && cdev->drv && cdev->drv->prepare)
+		return cdev->drv->prepare(cdev);
+
+	return 0;
+}
+
+static void ccw_device_pm_complete(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+
+	if (cdev->online && cdev->drv && cdev->drv->complete)
+		cdev->drv->complete(cdev);
+}
+
+static int ccw_device_pm_freeze(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	int ret, cm_enabled;
+
+	/* Fail suspend while device is in transistional state. */
+	if (!dev_fsm_final_state(cdev))
+		return -EAGAIN;
+	if (!cdev->online)
+		return 0;
+	if (cdev->drv && cdev->drv->freeze) {
+		ret = cdev->drv->freeze(cdev);
+		if (ret)
+			return ret;
+	}
+
+	spin_lock_irq(sch->lock);
+	cm_enabled = cdev->private->cmb != NULL;
+	spin_unlock_irq(sch->lock);
+	if (cm_enabled) {
+		/* Don't have the css write on memory. */
+		ret = ccw_set_cmf(cdev, 0);
+		if (ret)
+			return ret;
+	}
+	/* From here on, disallow device driver I/O. */
+	spin_lock_irq(sch->lock);
+	ret = cio_disable_subchannel(sch);
+	spin_unlock_irq(sch->lock);
+
+	return ret;
+}
+
+static int ccw_device_pm_thaw(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	int ret, cm_enabled;
+
+	if (!cdev->online)
+		return 0;
+
+	spin_lock_irq(sch->lock);
+	/* Allow device driver I/O again. */
+	ret = cio_enable_subchannel(sch, (u32)(addr_t)sch);
+	cm_enabled = cdev->private->cmb != NULL;
+	spin_unlock_irq(sch->lock);
+	if (ret)
+		return ret;
+
+	if (cm_enabled) {
+		ret = ccw_set_cmf(cdev, 1);
+		if (ret)
+			return ret;
+	}
+
+	if (cdev->drv && cdev->drv->thaw)
+		ret = cdev->drv->thaw(cdev);
+
+	return ret;
+}
+
+static void __ccw_device_pm_restore(struct ccw_device *cdev)
+{
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	int ret;
+
+	if (cio_is_console(sch->schid))
+		goto out;
+	/*
+	 * While we were sleeping, devices may have gone or become
+	 * available again. Kick re-detection.
+	 */
+	spin_lock_irq(sch->lock);
+	cdev->private->flags.resuming = 1;
+	ret = ccw_device_recognition(cdev);
+	spin_unlock_irq(sch->lock);
+	if (ret) {
+		CIO_MSG_EVENT(0, "Couldn't start recognition for device "
+			      "%s (ret=%d)\n", dev_name(&cdev->dev), ret);
+		spin_lock_irq(sch->lock);
+		cdev->private->state = DEV_STATE_DISCONNECTED;
+		spin_unlock_irq(sch->lock);
+		/* notify driver after the resume cb */
+		goto out;
+	}
+	wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev) ||
+		   cdev->private->state == DEV_STATE_DISCONNECTED);
+
+out:
+	cdev->private->flags.resuming = 0;
+}
+
+static int resume_handle_boxed(struct ccw_device *cdev)
+{
+	cdev->private->state = DEV_STATE_BOXED;
+	if (ccw_device_notify(cdev, CIO_BOXED))
+		return 0;
+	ccw_device_schedule_sch_unregister(cdev);
+	return -ENODEV;
+}
+
+static int resume_handle_disc(struct ccw_device *cdev)
+{
+	cdev->private->state = DEV_STATE_DISCONNECTED;
+	if (ccw_device_notify(cdev, CIO_GONE))
+		return 0;
+	ccw_device_schedule_sch_unregister(cdev);
+	return -ENODEV;
+}
+
+static int ccw_device_pm_restore(struct device *dev)
+{
+	struct ccw_device *cdev = to_ccwdev(dev);
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	int ret = 0, cm_enabled;
+
+	__ccw_device_pm_restore(cdev);
+	spin_lock_irq(sch->lock);
+	if (cio_is_console(sch->schid)) {
+		cio_enable_subchannel(sch, (u32)(addr_t)sch);
+		spin_unlock_irq(sch->lock);
+		goto out_restore;
+	}
+	cdev->private->flags.donotify = 0;
+	/* check recognition results */
+	switch (cdev->private->state) {
+	case DEV_STATE_OFFLINE:
+		break;
+	case DEV_STATE_BOXED:
+		ret = resume_handle_boxed(cdev);
+		spin_unlock_irq(sch->lock);
+		if (ret)
+			goto out;
+		goto out_restore;
+	case DEV_STATE_DISCONNECTED:
+		goto out_disc_unlock;
+	default:
+		goto out_unreg_unlock;
+	}
+	/* check if the device id has changed */
+	if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) {
+		CIO_MSG_EVENT(0, "resume: sch %s: failed (devno changed from "
+			      "%04x to %04x)\n", dev_name(&sch->dev),
+			      cdev->private->dev_id.devno,
+			      sch->schib.pmcw.dev);
+		goto out_unreg_unlock;
+	}
+	/* check if the device type has changed */
+	if (!ccw_device_test_sense_data(cdev)) {
+		ccw_device_update_sense_data(cdev);
+		PREPARE_WORK(&cdev->private->kick_work,
+			     ccw_device_do_unbind_bind);
+		queue_work(ccw_device_work, &cdev->private->kick_work);
+		ret = -ENODEV;
+		goto out_unlock;
+	}
+	if (!cdev->online) {
+		ret = 0;
+		goto out_unlock;
+	}
+	ret = ccw_device_online(cdev);
+	if (ret)
+		goto out_disc_unlock;
+
+	cm_enabled = cdev->private->cmb != NULL;
+	spin_unlock_irq(sch->lock);
+
+	wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
+	if (cdev->private->state != DEV_STATE_ONLINE) {
+		spin_lock_irq(sch->lock);
+		goto out_disc_unlock;
+	}
+	if (cm_enabled) {
+		ret = ccw_set_cmf(cdev, 1);
+		if (ret) {
+			CIO_MSG_EVENT(2, "resume: cdev %s: cmf failed "
+				      "(rc=%d)\n", dev_name(&cdev->dev), ret);
+			ret = 0;
+		}
+	}
+
+out_restore:
+	if (cdev->online && cdev->drv && cdev->drv->restore)
+		ret = cdev->drv->restore(cdev);
+out:
+	return ret;
+
+out_disc_unlock:
+	ret = resume_handle_disc(cdev);
+	spin_unlock_irq(sch->lock);
+	if (ret)
+		return ret;
+	goto out_restore;
+
+out_unreg_unlock:
+	ccw_device_schedule_sch_unregister(cdev);
+	ret = -ENODEV;
+out_unlock:
+	spin_unlock_irq(sch->lock);
+	return ret;
+}
+
+static struct dev_pm_ops ccw_pm_ops = {
+	.prepare = ccw_device_pm_prepare,
+	.complete = ccw_device_pm_complete,
+	.freeze = ccw_device_pm_freeze,
+	.thaw = ccw_device_pm_thaw,
+	.restore = ccw_device_pm_restore,
+};
+
 struct bus_type ccw_bus_type = {
 	.name   = "ccw",
 	.match  = ccw_bus_match,
@@ -1902,6 +2161,7 @@ struct bus_type ccw_bus_type = {
 	.probe  = ccw_device_probe,
 	.remove = ccw_device_remove,
 	.shutdown = ccw_device_shutdown,
+	.pm = &ccw_pm_ops,
 };
 
 /**
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index f1cbbd94ad4..e3975107a57 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -87,6 +87,8 @@ int ccw_device_is_orphan(struct ccw_device *);
 int ccw_device_recognition(struct ccw_device *);
 int ccw_device_online(struct ccw_device *);
 int ccw_device_offline(struct ccw_device *);
+void ccw_device_update_sense_data(struct ccw_device *);
+int ccw_device_test_sense_data(struct ccw_device *);
 void ccw_device_schedule_sch_unregister(struct ccw_device *);
 int ccw_purge_blacklisted(void);
 
@@ -133,5 +135,6 @@ extern struct bus_type ccw_bus_type;
 void retry_set_schib(struct ccw_device *cdev);
 void cmf_retry_copy_block(struct ccw_device *);
 int cmf_reenable(struct ccw_device *);
+int ccw_set_cmf(struct ccw_device *cdev, int enable);
 extern struct device_attribute dev_attr_cmb_enable;
 #endif
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index e4604926156..3db88c52d28 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -177,29 +177,21 @@ ccw_device_cancel_halt_clear(struct ccw_device *cdev)
 	panic("Can't stop i/o on subchannel.\n");
 }
 
-static int
-ccw_device_handle_oper(struct ccw_device *cdev)
+void ccw_device_update_sense_data(struct ccw_device *cdev)
 {
-	struct subchannel *sch;
+	memset(&cdev->id, 0, sizeof(cdev->id));
+	cdev->id.cu_type   = cdev->private->senseid.cu_type;
+	cdev->id.cu_model  = cdev->private->senseid.cu_model;
+	cdev->id.dev_type  = cdev->private->senseid.dev_type;
+	cdev->id.dev_model = cdev->private->senseid.dev_model;
+}
 
-	sch = to_subchannel(cdev->dev.parent);
-	cdev->private->flags.recog_done = 1;
-	/*
-	 * Check if cu type and device type still match. If
-	 * not, it is certainly another device and we have to
-	 * de- and re-register.
-	 */
-	if (cdev->id.cu_type != cdev->private->senseid.cu_type ||
-	    cdev->id.cu_model != cdev->private->senseid.cu_model ||
-	    cdev->id.dev_type != cdev->private->senseid.dev_type ||
-	    cdev->id.dev_model != cdev->private->senseid.dev_model) {
-		PREPARE_WORK(&cdev->private->kick_work,
-			     ccw_device_do_unbind_bind);
-		queue_work(ccw_device_work, &cdev->private->kick_work);
-		return 0;
-	}
-	cdev->private->flags.donotify = 1;
-	return 1;
+int ccw_device_test_sense_data(struct ccw_device *cdev)
+{
+	return cdev->id.cu_type == cdev->private->senseid.cu_type &&
+		cdev->id.cu_model == cdev->private->senseid.cu_model &&
+		cdev->id.dev_type == cdev->private->senseid.dev_type &&
+		cdev->id.dev_model == cdev->private->senseid.dev_model;
 }
 
 /*
@@ -233,7 +225,7 @@ static void
 ccw_device_recog_done(struct ccw_device *cdev, int state)
 {
 	struct subchannel *sch;
-	int notify, old_lpm, same_dev;
+	int old_lpm;
 
 	sch = to_subchannel(cdev->dev.parent);
 
@@ -263,8 +255,12 @@ ccw_device_recog_done(struct ccw_device *cdev, int state)
 		wake_up(&cdev->private->wait_q);
 		return;
 	}
-	notify = 0;
-	same_dev = 0; /* Keep the compiler quiet... */
+	if (cdev->private->flags.resuming) {
+		cdev->private->state = state;
+		cdev->private->flags.recog_done = 1;
+		wake_up(&cdev->private->wait_q);
+		return;
+	}
 	switch (state) {
 	case DEV_STATE_NOT_OPER:
 		CIO_MSG_EVENT(2, "SenseID : unknown device %04x on "
@@ -273,34 +269,31 @@ ccw_device_recog_done(struct ccw_device *cdev, int state)
 			      sch->schid.ssid, sch->schid.sch_no);
 		break;
 	case DEV_STATE_OFFLINE:
-		if (cdev->online) {
-			same_dev = ccw_device_handle_oper(cdev);
-			notify = 1;
+		if (!cdev->online) {
+			ccw_device_update_sense_data(cdev);
+			/* Issue device info message. */
+			CIO_MSG_EVENT(4, "SenseID : device 0.%x.%04x reports: "
+				      "CU  Type/Mod = %04X/%02X, Dev Type/Mod "
+				      "= %04X/%02X\n",
+				      cdev->private->dev_id.ssid,
+				      cdev->private->dev_id.devno,
+				      cdev->id.cu_type, cdev->id.cu_model,
+				      cdev->id.dev_type, cdev->id.dev_model);
+			break;
 		}
-		/* fill out sense information */
-		memset(&cdev->id, 0, sizeof(cdev->id));
-		cdev->id.cu_type   = cdev->private->senseid.cu_type;
-		cdev->id.cu_model  = cdev->private->senseid.cu_model;
-		cdev->id.dev_type  = cdev->private->senseid.dev_type;
-		cdev->id.dev_model = cdev->private->senseid.dev_model;
-		if (notify) {
-			cdev->private->state = DEV_STATE_OFFLINE;
-			if (same_dev) {
-				/* Get device online again. */
-				ccw_device_online(cdev);
-				wake_up(&cdev->private->wait_q);
-			}
-			return;
+		cdev->private->state = DEV_STATE_OFFLINE;
+		cdev->private->flags.recog_done = 1;
+		if (ccw_device_test_sense_data(cdev)) {
+			cdev->private->flags.donotify = 1;
+			ccw_device_online(cdev);
+			wake_up(&cdev->private->wait_q);
+		} else {
+			ccw_device_update_sense_data(cdev);
+			PREPARE_WORK(&cdev->private->kick_work,
+				     ccw_device_do_unbind_bind);
+			queue_work(ccw_device_work, &cdev->private->kick_work);
 		}
-		/* Issue device info message. */
-		CIO_MSG_EVENT(4, "SenseID : device 0.%x.%04x reports: "
-			      "CU  Type/Mod = %04X/%02X, Dev Type/Mod = "
-			      "%04X/%02X\n",
-			      cdev->private->dev_id.ssid,
-			      cdev->private->dev_id.devno,
-			      cdev->id.cu_type, cdev->id.cu_model,
-			      cdev->id.dev_type, cdev->id.dev_model);
-		break;
+		return;
 	case DEV_STATE_BOXED:
 		CIO_MSG_EVENT(0, "SenseID : boxed device %04x on "
 			      " subchannel 0.%x.%04x\n",
@@ -502,9 +495,6 @@ ccw_device_recognition(struct ccw_device *cdev)
 	struct subchannel *sch;
 	int ret;
 
-	if ((cdev->private->state != DEV_STATE_NOT_OPER) &&
-	    (cdev->private->state != DEV_STATE_BOXED))
-		return -EINVAL;
 	sch = to_subchannel(cdev->dev.parent);
 	ret = cio_enable_subchannel(sch, (u32)(addr_t)sch);
 	if (ret != 0)
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index bf0a24af39a..2d0efee8a29 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -1,10 +1,8 @@
 /*
- *  drivers/s390/cio/device_ops.c
+ * Copyright IBM Corp. 2002, 2009
  *
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
- *			 IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *               Cornelia Huck (cornelia.huck@de.ibm.com)
+ * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *	      Cornelia Huck (cornelia.huck@de.ibm.com)
  */
 #include <linux/module.h>
 #include <linux/init.h>
@@ -116,12 +114,15 @@ int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm)
 
 	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
+	sch = to_subchannel(cdev->dev.parent);
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state != DEV_STATE_ONLINE &&
 	    cdev->private->state != DEV_STATE_W4SENSE)
 		return -EINVAL;
-	sch = to_subchannel(cdev->dev.parent);
+
 	ret = cio_clear(sch);
 	if (ret == 0)
 		cdev->private->intparm = intparm;
@@ -162,6 +163,8 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa,
 	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
 	sch = to_subchannel(cdev->dev.parent);
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state == DEV_STATE_VERIFY ||
@@ -337,12 +340,15 @@ int ccw_device_halt(struct ccw_device *cdev, unsigned long intparm)
 
 	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
+	sch = to_subchannel(cdev->dev.parent);
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state != DEV_STATE_ONLINE &&
 	    cdev->private->state != DEV_STATE_W4SENSE)
 		return -EINVAL;
-	sch = to_subchannel(cdev->dev.parent);
+
 	ret = cio_halt(sch);
 	if (ret == 0)
 		cdev->private->intparm = intparm;
@@ -369,6 +375,8 @@ int ccw_device_resume(struct ccw_device *cdev)
 	if (!cdev || !cdev->dev.parent)
 		return -ENODEV;
 	sch = to_subchannel(cdev->dev.parent);
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state == DEV_STATE_NOT_OPER)
 		return -ENODEV;
 	if (cdev->private->state != DEV_STATE_ONLINE ||
@@ -580,6 +588,8 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw,
 	int rc;
 
 	sch = to_subchannel(cdev->dev.parent);
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state != DEV_STATE_ONLINE)
 		return -EIO;
 	/* Adjust requested path mask to excluded varied off paths. */
@@ -669,6 +679,8 @@ int ccw_device_tm_intrg(struct ccw_device *cdev)
 {
 	struct subchannel *sch = to_subchannel(cdev->dev.parent);
 
+	if (!sch->schib.pmcw.ena)
+		return -EINVAL;
 	if (cdev->private->state != DEV_STATE_ONLINE)
 		return -EIO;
 	if (!scsw_is_tm(&sch->schib.scsw) ||
diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h
index c4f3e7c9a85..0b8f381bd20 100644
--- a/drivers/s390/cio/io_sch.h
+++ b/drivers/s390/cio/io_sch.h
@@ -107,6 +107,7 @@ struct ccw_device_private {
 		unsigned int recog_done:1;  /* dev. recog. complete */
 		unsigned int fake_irb:1;    /* deliver faked irb */
 		unsigned int intretry:1;    /* retry internal operation */
+		unsigned int resuming:1;    /* recognition while resume */
 	} __attribute__((packed)) flags;
 	unsigned long intparm;	/* user interruption parameter */
 	struct qdio_irq *qdio_data;
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index a7745c82b4a..cb909a5b504 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -8,7 +8,7 @@ config LCS
 	   Select this option if you want to use LCS networking on IBM System z.
 	   This device driver supports Token Ring (IEEE 802.5),
 	   FDDI (IEEE 802.7) and Ethernet.
-	   To compile as a module, choose M. The module name is lcs.ko.
+	   To compile as a module, choose M. The module name is lcs.
 	   If you do not know what it is, it's safe to choose Y.
 
 config CTCM
@@ -21,7 +21,7 @@ config CTCM
 	  It also supports virtual CTCs when running under VM.
 	  This driver also supports channel-to-channel MPC SNA devices.
 	  MPC is an SNA protocol device used by Communication Server for Linux.
-	  To compile as a module, choose M. The module name is ctcm.ko.
+	  To compile as a module, choose M. The module name is ctcm.
 	  To compile into the kernel, choose Y.
 	  If you do not need any channel-to-channel connection, choose N.
 
@@ -34,7 +34,7 @@ config NETIUCV
 	  link between VM guests. Using ifconfig a point-to-point connection
 	  can be established to the Linux on IBM System z
 	  running on the other VM guest. To compile as a module, choose M.
-	  The module name is netiucv.ko. If unsure, choose Y.
+	  The module name is netiucv. If unsure, choose Y.
 
 config SMSGIUCV
 	tristate "IUCV special message support (VM only)"
@@ -50,7 +50,7 @@ config CLAW
 	  This driver supports channel attached CLAW devices.
 	  CLAW is Common Link Access for Workstation.  Common devices
           that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
-	  To compile as a module, choose M. The module name is claw.ko.
+	  To compile as a module, choose M. The module name is claw.
 	  To compile into the kernel, choose Y.
 
 config QETH
@@ -65,14 +65,14 @@ config QETH
 	  <http://www.ibm.com/developerworks/linux/linux390>
 
 	  To compile this driver as a module, choose M.
-	  The module name is qeth.ko.
+	  The module name is qeth.
 
 config QETH_L2
         tristate "qeth layer 2 device support"
         depends on QETH
         help
           Select this option to be able to run qeth devices in layer 2 mode.
-          To compile as a module, choose M. The module name is qeth_l2.ko.
+          To compile as a module, choose M. The module name is qeth_l2.
           If unsure, choose y.
 
 config QETH_L3
@@ -80,7 +80,7 @@ config QETH_L3
         depends on QETH
         help
           Select this option to be able to run qeth devices in layer 3 mode.
-          To compile as a module choose M. The module name is qeth_l3.ko.
+          To compile as a module choose M. The module name is qeth_l3.
           If unsure, choose Y.
 
 config QETH_IPV6
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index 30a43cc79e7..f370f8d460a 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -3,12 +3,12 @@
  *    ESCON CLAW network driver
  *
  *  Linux for zSeries version
- *    Copyright (C) 2002,2005 IBM Corporation
+ *    Copyright IBM Corp. 2002, 2009
  *  Author(s) Original code written by:
- *              Kazuo Iimura (iimura@jp.ibm.com)
+ *		Kazuo Iimura <iimura@jp.ibm.com>
  *   	      Rewritten by
- *              Andy Richter (richtera@us.ibm.com)
- *              Marc Price (mwprice@us.ibm.com)
+ *		Andy Richter <richtera@us.ibm.com>
+ *		Marc Price <mwprice@us.ibm.com>
  *
  *    sysfs parms:
  *   group x.x.rrrr,x.x.wwww
@@ -253,6 +253,11 @@ static void claw_free_wrt_buf(struct net_device *dev);
 /* Functions for unpack reads   */
 static void unpack_read(struct net_device *dev);
 
+static int claw_pm_prepare(struct ccwgroup_device *gdev)
+{
+	return -EPERM;
+}
+
 /* ccwgroup table  */
 
 static struct ccwgroup_driver claw_group_driver = {
@@ -264,6 +269,7 @@ static struct ccwgroup_driver claw_group_driver = {
         .remove      = claw_remove_device,
         .set_online  = claw_new_device,
         .set_offline = claw_shutdown_device,
+	.prepare     = claw_pm_prepare,
 };
 
 /*
@@ -284,7 +290,7 @@ claw_probe(struct ccwgroup_device *cgdev)
 	if (!get_device(&cgdev->dev))
 		return -ENODEV;
 	privptr = kzalloc(sizeof(struct claw_privbk), GFP_KERNEL);
-	cgdev->dev.driver_data = privptr;
+	dev_set_drvdata(&cgdev->dev, privptr);
 	if (privptr == NULL) {
 		probe_error(cgdev);
 		put_device(&cgdev->dev);
@@ -338,12 +344,6 @@ claw_tx(struct sk_buff *skb, struct net_device *dev)
 
 	CLAW_DBF_TEXT(4, trace, "claw_tx");
         p_ch=&privptr->channel[WRITE];
-        if (skb == NULL) {
-                privptr->stats.tx_dropped++;
-		privptr->stats.tx_errors++;
-		CLAW_DBF_TEXT_(2, trace, "clawtx%d", -EIO);
-                return -EIO;
-        }
         spin_lock_irqsave(get_ccwdev_lock(p_ch->cdev), saveflags);
         rc=claw_hw_tx( skb, dev, 1 );
         spin_unlock_irqrestore(get_ccwdev_lock(p_ch->cdev), saveflags);
@@ -597,14 +597,14 @@ claw_irq_handler(struct ccw_device *cdev,
 
 	CLAW_DBF_TEXT(4, trace, "clawirq");
         /* Bypass all 'unsolicited interrupts' */
-	if (!cdev->dev.driver_data) {
+	privptr = dev_get_drvdata(&cdev->dev);
+	if (!privptr) {
 		dev_warn(&cdev->dev, "An uninitialized CLAW device received an"
 			" IRQ, c-%02x d-%02x\n",
 			irb->scsw.cmd.cstat, irb->scsw.cmd.dstat);
 		CLAW_DBF_TEXT(2, trace, "badirq");
                 return;
         }
-	privptr = (struct claw_privbk *)cdev->dev.driver_data;
 
 	/* Try to extract channel from driver data. */
 	if (privptr->channel[READ].cdev == cdev)
@@ -1986,9 +1986,9 @@ probe_error( struct ccwgroup_device *cgdev)
 	struct claw_privbk *privptr;
 
 	CLAW_DBF_TEXT(4, trace, "proberr");
-	privptr = (struct claw_privbk *) cgdev->dev.driver_data;
+	privptr = dev_get_drvdata(&cgdev->dev);
 	if (privptr != NULL) {
-		cgdev->dev.driver_data = NULL;
+		dev_set_drvdata(&cgdev->dev, NULL);
 		kfree(privptr->p_env);
 		kfree(privptr->p_mtc_envelope);
 		kfree(privptr);
@@ -2917,9 +2917,9 @@ claw_new_device(struct ccwgroup_device *cgdev)
 	dev_info(&cgdev->dev, "add for %s\n",
 		 dev_name(&cgdev->cdev[READ]->dev));
 	CLAW_DBF_TEXT(2, setup, "new_dev");
-	privptr = cgdev->dev.driver_data;
-	cgdev->cdev[READ]->dev.driver_data = privptr;
-	cgdev->cdev[WRITE]->dev.driver_data = privptr;
+	privptr = dev_get_drvdata(&cgdev->dev);
+	dev_set_drvdata(&cgdev->cdev[READ]->dev, privptr);
+	dev_set_drvdata(&cgdev->cdev[WRITE]->dev, privptr);
 	if (!privptr)
 		return -ENODEV;
 	p_env = privptr->p_env;
@@ -2956,9 +2956,9 @@ claw_new_device(struct ccwgroup_device *cgdev)
 		goto out;
 	}
 	dev->ml_priv = privptr;
-	cgdev->dev.driver_data = privptr;
-        cgdev->cdev[READ]->dev.driver_data = privptr;
-        cgdev->cdev[WRITE]->dev.driver_data = privptr;
+	dev_set_drvdata(&cgdev->dev, privptr);
+	dev_set_drvdata(&cgdev->cdev[READ]->dev, privptr);
+	dev_set_drvdata(&cgdev->cdev[WRITE]->dev, privptr);
 	/* sysfs magic */
         SET_NETDEV_DEV(dev, &cgdev->dev);
 	if (register_netdev(dev) != 0) {
@@ -3024,7 +3024,7 @@ claw_shutdown_device(struct ccwgroup_device *cgdev)
 	int	ret;
 
 	CLAW_DBF_TEXT_(2, setup, "%s", dev_name(&cgdev->dev));
-	priv = cgdev->dev.driver_data;
+	priv = dev_get_drvdata(&cgdev->dev);
 	if (!priv)
 		return -ENODEV;
 	ndev = priv->channel[READ].ndev;
@@ -3054,7 +3054,7 @@ claw_remove_device(struct ccwgroup_device *cgdev)
 
 	BUG_ON(!cgdev);
 	CLAW_DBF_TEXT_(2, setup, "%s", dev_name(&cgdev->dev));
-	priv = cgdev->dev.driver_data;
+	priv = dev_get_drvdata(&cgdev->dev);
 	BUG_ON(!priv);
 	dev_info(&cgdev->dev, " will be removed.\n");
 	if (cgdev->state == CCWGROUP_ONLINE)
@@ -3069,9 +3069,9 @@ claw_remove_device(struct ccwgroup_device *cgdev)
 	kfree(priv->channel[1].irb);
 	priv->channel[1].irb=NULL;
 	kfree(priv);
-	cgdev->dev.driver_data=NULL;
-	cgdev->cdev[READ]->dev.driver_data = NULL;
-	cgdev->cdev[WRITE]->dev.driver_data = NULL;
+	dev_set_drvdata(&cgdev->dev, NULL);
+	dev_set_drvdata(&cgdev->cdev[READ]->dev, NULL);
+	dev_set_drvdata(&cgdev->cdev[WRITE]->dev, NULL);
 	put_device(&cgdev->dev);
 
 	return;
@@ -3087,7 +3087,7 @@ claw_hname_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct claw_privbk *priv;
 	struct claw_env *  p_env;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3101,7 +3101,7 @@ claw_hname_write(struct device *dev, struct device_attribute *attr,
 	struct claw_privbk *priv;
 	struct claw_env *  p_env;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3125,7 +3125,7 @@ claw_adname_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct claw_privbk *priv;
 	struct claw_env *  p_env;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3139,7 +3139,7 @@ claw_adname_write(struct device *dev, struct device_attribute *attr,
 	struct claw_privbk *priv;
 	struct claw_env *  p_env;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3163,7 +3163,7 @@ claw_apname_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct claw_privbk *priv;
 	struct claw_env *  p_env;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3178,7 +3178,7 @@ claw_apname_write(struct device *dev, struct device_attribute *attr,
 	struct claw_privbk *priv;
 	struct claw_env *  p_env;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3212,7 +3212,7 @@ claw_wbuff_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct claw_privbk *priv;
 	struct claw_env * p_env;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3227,7 +3227,7 @@ claw_wbuff_write(struct device *dev, struct device_attribute *attr,
 	struct claw_env *  p_env;
 	int nnn,max;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3254,7 +3254,7 @@ claw_rbuff_show(struct device *dev, struct device_attribute *attr, char *buf)
 	struct claw_privbk *priv;
 	struct claw_env *  p_env;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
@@ -3269,7 +3269,7 @@ claw_rbuff_write(struct device *dev, struct device_attribute *attr,
 	struct claw_env *p_env;
 	int nnn,max;
 
-	priv = dev->driver_data;
+	priv = dev_get_drvdata(dev);
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 77f4033a0f4..222e4739443 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -1,7 +1,7 @@
 /*
  * drivers/s390/net/ctcm_main.c
  *
- * Copyright IBM Corp. 2001, 2007
+ * Copyright IBM Corp. 2001, 2009
  * Author(s):
  *	Original CTC driver(s):
  *		Fritz Elfert (felfert@millenux.com)
@@ -1677,10 +1677,8 @@ static void ctcm_remove_device(struct ccwgroup_device *cgdev)
 	BUG_ON(priv == NULL);
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
-			"removing device %s, r/w = %s/%s, proto : %d",
-			priv->channel[READ]->netdev->name,
-			priv->channel[READ]->id, priv->channel[WRITE]->id,
-			priv->protocol);
+			"removing device %p, proto : %d",
+			cgdev, priv->protocol);
 
 	if (cgdev->state == CCWGROUP_ONLINE)
 		ctcm_shutdown_device(cgdev);
@@ -1690,6 +1688,38 @@ static void ctcm_remove_device(struct ccwgroup_device *cgdev)
 	put_device(&cgdev->dev);
 }
 
+static int ctcm_pm_suspend(struct ccwgroup_device *gdev)
+{
+	struct ctcm_priv *priv = dev_get_drvdata(&gdev->dev);
+
+	if (gdev->state == CCWGROUP_OFFLINE)
+		return 0;
+	netif_device_detach(priv->channel[READ]->netdev);
+	ctcm_close(priv->channel[READ]->netdev);
+	ccw_device_set_offline(gdev->cdev[1]);
+	ccw_device_set_offline(gdev->cdev[0]);
+	return 0;
+}
+
+static int ctcm_pm_resume(struct ccwgroup_device *gdev)
+{
+	struct ctcm_priv *priv = dev_get_drvdata(&gdev->dev);
+	int rc;
+
+	if (gdev->state == CCWGROUP_OFFLINE)
+		return 0;
+	rc = ccw_device_set_online(gdev->cdev[1]);
+	if (rc)
+		goto err_out;
+	rc = ccw_device_set_online(gdev->cdev[0]);
+	if (rc)
+		goto err_out;
+	ctcm_open(priv->channel[READ]->netdev);
+err_out:
+	netif_device_attach(priv->channel[READ]->netdev);
+	return rc;
+}
+
 static struct ccwgroup_driver ctcm_group_driver = {
 	.owner       = THIS_MODULE,
 	.name        = CTC_DRIVER_NAME,
@@ -1699,6 +1729,9 @@ static struct ccwgroup_driver ctcm_group_driver = {
 	.remove      = ctcm_remove_device,
 	.set_online  = ctcm_new_device,
 	.set_offline = ctcm_shutdown_device,
+	.freeze	     = ctcm_pm_suspend,
+	.thaw	     = ctcm_pm_resume,
+	.restore     = ctcm_pm_resume,
 };
 
 
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index a45bc24eb5f..8c675905448 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1,15 +1,12 @@
 /*
- *  linux/drivers/s390/net/lcs.c
- *
  *  Linux for S/390 Lan Channel Station Network Driver
  *
- *  Copyright (C)  1999-2001 IBM Deutschland Entwicklung GmbH,
- *			     IBM Corporation
- *    Author(s): Original Code written by
- *			  DJ Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- *		 Rewritten by
- *			  Frank Pavlic (fpavlic@de.ibm.com) and
- *		 	  Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *  Copyright IBM Corp. 1999, 2009
+ *  Author(s): Original Code written by
+ *			DJ Barrow <djbarrow@de.ibm.com,barrow_dj@yahoo.com>
+ *	       Rewritten by
+ *			Frank Pavlic <fpavlic@de.ibm.com> and
+ *			Martin Schwidefsky <schwidefsky@de.ibm.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1939,7 +1936,7 @@ lcs_portno_show (struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct lcs_card *card;
 
-	card = (struct lcs_card *)dev->driver_data;
+	card = dev_get_drvdata(dev);
 
         if (!card)
                 return 0;
@@ -1956,7 +1953,7 @@ lcs_portno_store (struct device *dev, struct device_attribute *attr, const char
         struct lcs_card *card;
         int value;
 
-	card = (struct lcs_card *)dev->driver_data;
+	card = dev_get_drvdata(dev);
 
         if (!card)
                 return 0;
@@ -1990,7 +1987,7 @@ lcs_timeout_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct lcs_card *card;
 
-	card = (struct lcs_card *)dev->driver_data;
+	card = dev_get_drvdata(dev);
 
 	return card ? sprintf(buf, "%u\n", card->lancmd_timeout) : 0;
 }
@@ -2001,7 +1998,7 @@ lcs_timeout_store (struct device *dev, struct device_attribute *attr, const char
         struct lcs_card *card;
         int value;
 
-	card = (struct lcs_card *)dev->driver_data;
+	card = dev_get_drvdata(dev);
 
         if (!card)
                 return 0;
@@ -2020,7 +2017,7 @@ static ssize_t
 lcs_dev_recover_store(struct device *dev, struct device_attribute *attr,
 		      const char *buf, size_t count)
 {
-	struct lcs_card *card = dev->driver_data;
+	struct lcs_card *card = dev_get_drvdata(dev);
 	char *tmp;
 	int i;
 
@@ -2073,7 +2070,7 @@ lcs_probe_device(struct ccwgroup_device *ccwgdev)
 		put_device(&ccwgdev->dev);
 		return ret;
         }
-	ccwgdev->dev.driver_data = card;
+	dev_set_drvdata(&ccwgdev->dev, card);
 	ccwgdev->cdev[0]->handler = lcs_irq;
 	ccwgdev->cdev[1]->handler = lcs_irq;
 	card->gdev = ccwgdev;
@@ -2090,7 +2087,7 @@ lcs_register_netdev(struct ccwgroup_device *ccwgdev)
 	struct lcs_card *card;
 
 	LCS_DBF_TEXT(2, setup, "regnetdv");
-	card = (struct lcs_card *)ccwgdev->dev.driver_data;
+	card = dev_get_drvdata(&ccwgdev->dev);
 	if (card->dev->reg_state != NETREG_UNINITIALIZED)
 		return 0;
 	SET_NETDEV_DEV(card->dev, &ccwgdev->dev);
@@ -2123,7 +2120,7 @@ lcs_new_device(struct ccwgroup_device *ccwgdev)
 	enum lcs_dev_states recover_state;
 	int rc;
 
-	card = (struct lcs_card *)ccwgdev->dev.driver_data;
+	card = dev_get_drvdata(&ccwgdev->dev);
 	if (!card)
 		return -ENODEV;
 
@@ -2229,7 +2226,7 @@ __lcs_shutdown_device(struct ccwgroup_device *ccwgdev, int recovery_mode)
 	int ret;
 
 	LCS_DBF_TEXT(3, setup, "shtdndev");
-	card = (struct lcs_card *)ccwgdev->dev.driver_data;
+	card = dev_get_drvdata(&ccwgdev->dev);
 	if (!card)
 		return -ENODEV;
 	if (recovery_mode == 0) {
@@ -2296,7 +2293,7 @@ lcs_remove_device(struct ccwgroup_device *ccwgdev)
 {
 	struct lcs_card *card;
 
-	card = (struct lcs_card *)ccwgdev->dev.driver_data;
+	card = dev_get_drvdata(&ccwgdev->dev);
 	if (!card)
 		return;
 
@@ -2313,6 +2310,60 @@ lcs_remove_device(struct ccwgroup_device *ccwgdev)
 	put_device(&ccwgdev->dev);
 }
 
+static int lcs_pm_suspend(struct lcs_card *card)
+{
+	if (card->dev)
+		netif_device_detach(card->dev);
+	lcs_set_allowed_threads(card, 0);
+	lcs_wait_for_threads(card, 0xffffffff);
+	if (card->state != DEV_STATE_DOWN)
+		__lcs_shutdown_device(card->gdev, 1);
+	return 0;
+}
+
+static int lcs_pm_resume(struct lcs_card *card)
+{
+	int rc = 0;
+
+	if (card->state == DEV_STATE_RECOVER)
+		rc = lcs_new_device(card->gdev);
+	if (card->dev)
+		netif_device_attach(card->dev);
+	if (rc) {
+		dev_warn(&card->gdev->dev, "The lcs device driver "
+			"failed to recover the device\n");
+	}
+	return rc;
+}
+
+static int lcs_prepare(struct ccwgroup_device *gdev)
+{
+	return 0;
+}
+
+static void lcs_complete(struct ccwgroup_device *gdev)
+{
+	return;
+}
+
+static int lcs_freeze(struct ccwgroup_device *gdev)
+{
+	struct lcs_card *card = dev_get_drvdata(&gdev->dev);
+	return lcs_pm_suspend(card);
+}
+
+static int lcs_thaw(struct ccwgroup_device *gdev)
+{
+	struct lcs_card *card = dev_get_drvdata(&gdev->dev);
+	return lcs_pm_resume(card);
+}
+
+static int lcs_restore(struct ccwgroup_device *gdev)
+{
+	struct lcs_card *card = dev_get_drvdata(&gdev->dev);
+	return lcs_pm_resume(card);
+}
+
 /**
  * LCS ccwgroup driver registration
  */
@@ -2325,6 +2376,11 @@ static struct ccwgroup_driver lcs_group_driver = {
 	.remove      = lcs_remove_device,
 	.set_online  = lcs_new_device,
 	.set_offline = lcs_shutdown_device,
+	.prepare     = lcs_prepare,
+	.complete    = lcs_complete,
+	.freeze	     = lcs_freeze,
+	.thaw	     = lcs_thaw,
+	.restore     = lcs_restore,
 };
 
 /**
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index d58fea52557..6d668642af2 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -34,8 +34,8 @@ static inline int lcs_dbf_passes(debug_info_t *dbf_grp, int level)
  *	sysfs related stuff
  */
 #define CARD_FROM_DEV(cdev) \
-	(struct lcs_card *) \
-	((struct ccwgroup_device *)cdev->dev.driver_data)->dev.driver_data;
+	(struct lcs_card *) dev_get_drvdata( \
+		&((struct ccwgroup_device *)dev_get_drvdata(&cdev->dev))->dev);
 /**
  * CCW commands used in this driver
  */
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index be716e45f7a..52574ce797b 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1,11 +1,15 @@
 /*
  * IUCV network driver
  *
- * Copyright 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com)
+ * Copyright IBM Corp. 2001, 2009
  *
- * Sysfs integration and all bugs therein by Cornelia Huck
- * (cornelia.huck@de.ibm.com)
+ * Author(s):
+ *	Original netiucv driver:
+ *		Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com)
+ *	Sysfs integration and all bugs therein:
+ *		Cornelia Huck (cornelia.huck@de.ibm.com)
+ *	PM functions:
+ *		Ursula Braun (ursula.braun@de.ibm.com)
  *
  * Documentation used:
  *  the source of the original IUCV driver by:
@@ -149,10 +153,27 @@ PRINT_##importance(header "%02x %02x %02x %02x  %02x %02x %02x %02x  " \
 
 #define PRINTK_HEADER " iucv: "       /* for debugging */
 
+/* dummy device to make sure netiucv_pm functions are called */
+static struct device *netiucv_dev;
+
+static int netiucv_pm_prepare(struct device *);
+static void netiucv_pm_complete(struct device *);
+static int netiucv_pm_freeze(struct device *);
+static int netiucv_pm_restore_thaw(struct device *);
+
+static struct dev_pm_ops netiucv_pm_ops = {
+	.prepare = netiucv_pm_prepare,
+	.complete = netiucv_pm_complete,
+	.freeze = netiucv_pm_freeze,
+	.thaw = netiucv_pm_restore_thaw,
+	.restore = netiucv_pm_restore_thaw,
+};
+
 static struct device_driver netiucv_driver = {
 	.owner = THIS_MODULE,
 	.name = "netiucv",
 	.bus  = &iucv_bus,
+	.pm = &netiucv_pm_ops,
 };
 
 static int netiucv_callback_connreq(struct iucv_path *,
@@ -233,6 +254,7 @@ struct netiucv_priv {
 	fsm_instance            *fsm;
         struct iucv_connection  *conn;
 	struct device           *dev;
+	int			 pm_state;
 };
 
 /**
@@ -1265,6 +1287,72 @@ static int netiucv_close(struct net_device *dev)
 	return 0;
 }
 
+static int netiucv_pm_prepare(struct device *dev)
+{
+	IUCV_DBF_TEXT(trace, 3, __func__);
+	return 0;
+}
+
+static void netiucv_pm_complete(struct device *dev)
+{
+	IUCV_DBF_TEXT(trace, 3, __func__);
+	return;
+}
+
+/**
+ * netiucv_pm_freeze() - Freeze PM callback
+ * @dev:	netiucv device
+ *
+ * close open netiucv interfaces
+ */
+static int netiucv_pm_freeze(struct device *dev)
+{
+	struct netiucv_priv *priv = dev->driver_data;
+	struct net_device *ndev = NULL;
+	int rc = 0;
+
+	IUCV_DBF_TEXT(trace, 3, __func__);
+	if (priv && priv->conn)
+		ndev = priv->conn->netdev;
+	if (!ndev)
+		goto out;
+	netif_device_detach(ndev);
+	priv->pm_state = fsm_getstate(priv->fsm);
+	rc = netiucv_close(ndev);
+out:
+	return rc;
+}
+
+/**
+ * netiucv_pm_restore_thaw() - Thaw and restore PM callback
+ * @dev:	netiucv device
+ *
+ * re-open netiucv interfaces closed during freeze
+ */
+static int netiucv_pm_restore_thaw(struct device *dev)
+{
+	struct netiucv_priv *priv = dev->driver_data;
+	struct net_device *ndev = NULL;
+	int rc = 0;
+
+	IUCV_DBF_TEXT(trace, 3, __func__);
+	if (priv && priv->conn)
+		ndev = priv->conn->netdev;
+	if (!ndev)
+		goto out;
+	switch (priv->pm_state) {
+	case DEV_STATE_RUNNING:
+	case DEV_STATE_STARTWAIT:
+		rc = netiucv_open(ndev);
+		break;
+	default:
+		break;
+	}
+	netif_device_attach(ndev);
+out:
+	return rc;
+}
+
 /**
  * Start transmission of a packet.
  * Called from generic network device layer.
@@ -1315,9 +1403,9 @@ static int netiucv_tx(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_BUSY;
 	}
 	dev->trans_start = jiffies;
-	rc = netiucv_transmit_skb(privptr->conn, skb) != 0;
+	rc = netiucv_transmit_skb(privptr->conn, skb);
 	netiucv_clear_busy(dev);
-	return rc;
+	return rc ? NETDEV_TX_BUSY : NETDEV_TX_OK;
 }
 
 /**
@@ -1364,7 +1452,7 @@ static int netiucv_change_mtu(struct net_device * dev, int new_mtu)
 static ssize_t user_show(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%s\n", netiucv_printname(priv->conn->userid));
@@ -1373,7 +1461,7 @@ static ssize_t user_show(struct device *dev, struct device_attribute *attr,
 static ssize_t user_write(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 	struct net_device *ndev = priv->conn->netdev;
 	char    *p;
 	char    *tmp;
@@ -1430,7 +1518,8 @@ static DEVICE_ATTR(user, 0644, user_show, user_write);
 
 static ssize_t buffer_show (struct device *dev, struct device_attribute *attr,
 			    char *buf)
-{	struct netiucv_priv *priv = dev->driver_data;
+{
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%d\n", priv->conn->max_buffsize);
@@ -1439,7 +1528,7 @@ static ssize_t buffer_show (struct device *dev, struct device_attribute *attr,
 static ssize_t buffer_write (struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 	struct net_device *ndev = priv->conn->netdev;
 	char         *e;
 	int          bs1;
@@ -1487,7 +1576,7 @@ static DEVICE_ATTR(buffer, 0644, buffer_show, buffer_write);
 static ssize_t dev_fsm_show (struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%s\n", fsm_getstate_str(priv->fsm));
@@ -1498,7 +1587,7 @@ static DEVICE_ATTR(device_fsm_state, 0444, dev_fsm_show, NULL);
 static ssize_t conn_fsm_show (struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%s\n", fsm_getstate_str(priv->conn->fsm));
@@ -1509,7 +1598,7 @@ static DEVICE_ATTR(connection_fsm_state, 0444, conn_fsm_show, NULL);
 static ssize_t maxmulti_show (struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%ld\n", priv->conn->prof.maxmulti);
@@ -1519,7 +1608,7 @@ static ssize_t maxmulti_write (struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 4, __func__);
 	priv->conn->prof.maxmulti = 0;
@@ -1531,7 +1620,7 @@ static DEVICE_ATTR(max_tx_buffer_used, 0644, maxmulti_show, maxmulti_write);
 static ssize_t maxcq_show (struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%ld\n", priv->conn->prof.maxcqueue);
@@ -1540,7 +1629,7 @@ static ssize_t maxcq_show (struct device *dev, struct device_attribute *attr,
 static ssize_t maxcq_write (struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 4, __func__);
 	priv->conn->prof.maxcqueue = 0;
@@ -1552,7 +1641,7 @@ static DEVICE_ATTR(max_chained_skbs, 0644, maxcq_show, maxcq_write);
 static ssize_t sdoio_show (struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%ld\n", priv->conn->prof.doios_single);
@@ -1561,7 +1650,7 @@ static ssize_t sdoio_show (struct device *dev, struct device_attribute *attr,
 static ssize_t sdoio_write (struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 4, __func__);
 	priv->conn->prof.doios_single = 0;
@@ -1573,7 +1662,7 @@ static DEVICE_ATTR(tx_single_write_ops, 0644, sdoio_show, sdoio_write);
 static ssize_t mdoio_show (struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%ld\n", priv->conn->prof.doios_multi);
@@ -1582,7 +1671,7 @@ static ssize_t mdoio_show (struct device *dev, struct device_attribute *attr,
 static ssize_t mdoio_write (struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	priv->conn->prof.doios_multi = 0;
@@ -1594,7 +1683,7 @@ static DEVICE_ATTR(tx_multi_write_ops, 0644, mdoio_show, mdoio_write);
 static ssize_t txlen_show (struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%ld\n", priv->conn->prof.txlen);
@@ -1603,7 +1692,7 @@ static ssize_t txlen_show (struct device *dev, struct device_attribute *attr,
 static ssize_t txlen_write (struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 4, __func__);
 	priv->conn->prof.txlen = 0;
@@ -1615,7 +1704,7 @@ static DEVICE_ATTR(netto_bytes, 0644, txlen_show, txlen_write);
 static ssize_t txtime_show (struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%ld\n", priv->conn->prof.tx_time);
@@ -1624,7 +1713,7 @@ static ssize_t txtime_show (struct device *dev, struct device_attribute *attr,
 static ssize_t txtime_write (struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 4, __func__);
 	priv->conn->prof.tx_time = 0;
@@ -1636,7 +1725,7 @@ static DEVICE_ATTR(max_tx_io_time, 0644, txtime_show, txtime_write);
 static ssize_t txpend_show (struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%ld\n", priv->conn->prof.tx_pending);
@@ -1645,7 +1734,7 @@ static ssize_t txpend_show (struct device *dev, struct device_attribute *attr,
 static ssize_t txpend_write (struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 4, __func__);
 	priv->conn->prof.tx_pending = 0;
@@ -1657,7 +1746,7 @@ static DEVICE_ATTR(tx_pending, 0644, txpend_show, txpend_write);
 static ssize_t txmpnd_show (struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 5, __func__);
 	return sprintf(buf, "%ld\n", priv->conn->prof.tx_max_pending);
@@ -1666,7 +1755,7 @@ static ssize_t txmpnd_show (struct device *dev, struct device_attribute *attr,
 static ssize_t txmpnd_write (struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
-	struct netiucv_priv *priv = dev->driver_data;
+	struct netiucv_priv *priv = dev_get_drvdata(dev);
 
 	IUCV_DBF_TEXT(trace, 4, __func__);
 	priv->conn->prof.tx_max_pending = 0;
@@ -1731,7 +1820,6 @@ static int netiucv_register_device(struct net_device *ndev)
 	struct device *dev = kzalloc(sizeof(struct device), GFP_KERNEL);
 	int ret;
 
-
 	IUCV_DBF_TEXT(trace, 3, __func__);
 
 	if (dev) {
@@ -1758,7 +1846,7 @@ static int netiucv_register_device(struct net_device *ndev)
 	if (ret)
 		goto out_unreg;
 	priv->dev = dev;
-	dev->driver_data = priv;
+	dev_set_drvdata(dev, priv);
 	return 0;
 
 out_unreg:
@@ -2100,6 +2188,7 @@ static void __exit netiucv_exit(void)
 		netiucv_unregister_device(dev);
 	}
 
+	device_unregister(netiucv_dev);
 	driver_unregister(&netiucv_driver);
 	iucv_unregister(&netiucv_handler, 1);
 	iucv_unregister_dbf_views();
@@ -2125,10 +2214,25 @@ static int __init netiucv_init(void)
 		IUCV_DBF_TEXT_(setup, 2, "ret %d from driver_register\n", rc);
 		goto out_iucv;
 	}
-
+	/* establish dummy device */
+	netiucv_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!netiucv_dev) {
+		rc = -ENOMEM;
+		goto out_driver;
+	}
+	dev_set_name(netiucv_dev, "netiucv");
+	netiucv_dev->bus = &iucv_bus;
+	netiucv_dev->parent = iucv_root;
+	netiucv_dev->release = (void (*)(struct device *))kfree;
+	netiucv_dev->driver = &netiucv_driver;
+	rc = device_register(netiucv_dev);
+	if (rc)
+		goto out_driver;
 	netiucv_banner();
 	return rc;
 
+out_driver:
+	driver_unregister(&netiucv_driver);
 out_iucv:
 	iucv_unregister(&netiucv_handler, 1);
 out_dbf:
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index c827d69b5a9..d53621c4acb 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1,7 +1,7 @@
 /*
  *  drivers/s390/net/qeth_core_main.c
  *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007, 2009
  *    Author(s): Utz Bacher <utz.bacher@de.ibm.com>,
  *		 Frank Pavlic <fpavlic@de.ibm.com>,
  *		 Thomas Spatzier <tspat@de.ibm.com>,
@@ -952,6 +952,7 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
 		buf->buffer->element[i].addr = NULL;
 		buf->buffer->element[i].flags = 0;
 	}
+	buf->buffer->element[15].flags = 0;
 	buf->next_element_to_fill = 0;
 	atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY);
 }
@@ -1140,6 +1141,8 @@ static int qeth_setup_card(struct qeth_card *card)
 	card->ipato.enabled = 0;
 	card->ipato.invert4 = 0;
 	card->ipato.invert6 = 0;
+	if (card->info.type == QETH_CARD_TYPE_IQD)
+		card->options.checksum_type = NO_CHECKSUMMING;
 	/* init QDIO stuff */
 	qeth_init_qdio_info(card);
 	return 0;
@@ -2934,8 +2937,8 @@ int qeth_get_cast_type(struct qeth_card *card, struct sk_buff *skb)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return cast_type;
 
-	if (skb->dst && skb->dst->neighbour) {
-		cast_type = skb->dst->neighbour->type;
+	if (skb_dst(skb) && skb_dst(skb)->neighbour) {
+		cast_type = skb_dst(skb)->neighbour->type;
 		if ((cast_type == RTN_BROADCAST) ||
 		    (cast_type == RTN_MULTICAST) ||
 		    (cast_type == RTN_ANYCAST))
@@ -4192,6 +4195,50 @@ static void qeth_core_shutdown(struct ccwgroup_device *gdev)
 		card->discipline.ccwgdriver->shutdown(gdev);
 }
 
+static int qeth_core_prepare(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->prepare)
+		return card->discipline.ccwgdriver->prepare(gdev);
+	return 0;
+}
+
+static void qeth_core_complete(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->complete)
+		card->discipline.ccwgdriver->complete(gdev);
+}
+
+static int qeth_core_freeze(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->freeze)
+		return card->discipline.ccwgdriver->freeze(gdev);
+	return 0;
+}
+
+static int qeth_core_thaw(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->thaw)
+		return card->discipline.ccwgdriver->thaw(gdev);
+	return 0;
+}
+
+static int qeth_core_restore(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	if (card->discipline.ccwgdriver &&
+	    card->discipline.ccwgdriver->restore)
+		return card->discipline.ccwgdriver->restore(gdev);
+	return 0;
+}
+
 static struct ccwgroup_driver qeth_core_ccwgroup_driver = {
 	.owner = THIS_MODULE,
 	.name = "qeth",
@@ -4201,6 +4248,11 @@ static struct ccwgroup_driver qeth_core_ccwgroup_driver = {
 	.set_online = qeth_core_set_online,
 	.set_offline = qeth_core_set_offline,
 	.shutdown = qeth_core_shutdown,
+	.prepare = qeth_core_prepare,
+	.complete = qeth_core_complete,
+	.freeze = qeth_core_freeze,
+	.thaw = qeth_core_thaw,
+	.restore = qeth_core_restore,
 };
 
 static ssize_t
diff --git a/drivers/s390/net/qeth_core_mpc.c b/drivers/s390/net/qeth_core_mpc.c
index 06f4de1f050..ec24901c802 100644
--- a/drivers/s390/net/qeth_core_mpc.c
+++ b/drivers/s390/net/qeth_core_mpc.c
@@ -181,6 +181,8 @@ static struct ipa_rc_msg qeth_ipa_rc_msg[] = {
 	{IPA_RC_L2_ADDR_TABLE_FULL,	"Layer2 address table full"},
 	{IPA_RC_L2_DUP_LAYER3_MAC,	"Duplicate with layer 3 MAC"},
 	{IPA_RC_L2_GMAC_NOT_FOUND,	"GMAC not found"},
+	{IPA_RC_L2_MAC_NOT_AUTH_BY_HYP,	"L2 mac not authorized by hypervisor"},
+	{IPA_RC_L2_MAC_NOT_AUTH_BY_ADP,	"L2 mac not authorized by adapter"},
 	{IPA_RC_L2_MAC_NOT_FOUND,	"L2 mac address not found"},
 	{IPA_RC_L2_INVALID_VLAN_ID,	"L2 invalid vlan id"},
 	{IPA_RC_L2_DUP_VLAN_ID,		"L2 duplicate vlan id"},
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 18548822e37..eecb2ee62e8 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -168,6 +168,8 @@ enum qeth_ipa_return_codes {
 	IPA_RC_L2_ADDR_TABLE_FULL	= 0x2006,
 	IPA_RC_L2_DUP_LAYER3_MAC	= 0x200a,
 	IPA_RC_L2_GMAC_NOT_FOUND	= 0x200b,
+	IPA_RC_L2_MAC_NOT_AUTH_BY_HYP	= 0x200c,
+	IPA_RC_L2_MAC_NOT_AUTH_BY_ADP	= 0x200d,
 	IPA_RC_L2_MAC_NOT_FOUND		= 0x2010,
 	IPA_RC_L2_INVALID_VLAN_ID	= 0x2015,
 	IPA_RC_L2_DUP_VLAN_ID		= 0x2016,
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 172031baedc..81d7f268418 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1,7 +1,7 @@
 /*
  *  drivers/s390/net/qeth_l2_main.c
  *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007, 2009
  *    Author(s): Utz Bacher <utz.bacher@de.ibm.com>,
  *		 Frank Pavlic <fpavlic@de.ibm.com>,
  *		 Thomas Spatzier <tspat@de.ibm.com>,
@@ -19,6 +19,7 @@
 #include <linux/etherdevice.h>
 #include <linux/mii.h>
 #include <linux/ip.h>
+#include <linux/list.h>
 
 #include "qeth_core.h"
 
@@ -130,7 +131,7 @@ static int qeth_l2_send_setgroupmac_cb(struct qeth_card *card,
 	cmd = (struct qeth_ipa_cmd *) data;
 	mac = &cmd->data.setdelmac.mac[0];
 	/* MAC already registered, needed in couple/uncouple case */
-	if (cmd->hdr.return_code == 0x2005) {
+	if (cmd->hdr.return_code ==  IPA_RC_L2_DUP_MAC) {
 		QETH_DBF_MESSAGE(2, "Group MAC %pM already existing on %s \n",
 			  mac, QETH_CARD_IFNAME(card));
 		cmd->hdr.return_code = 0;
@@ -502,6 +503,30 @@ static int qeth_l2_send_setmac_cb(struct qeth_card *card,
 	if (cmd->hdr.return_code) {
 		QETH_DBF_TEXT_(TRACE, 2, "L2er%x", cmd->hdr.return_code);
 		card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED;
+		switch (cmd->hdr.return_code) {
+		case IPA_RC_L2_DUP_MAC:
+		case IPA_RC_L2_DUP_LAYER3_MAC:
+			dev_warn(&card->gdev->dev,
+				"MAC address "
+				"%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
+				"already exists\n",
+				card->dev->dev_addr[0], card->dev->dev_addr[1],
+				card->dev->dev_addr[2], card->dev->dev_addr[3],
+				card->dev->dev_addr[4], card->dev->dev_addr[5]);
+			break;
+		case IPA_RC_L2_MAC_NOT_AUTH_BY_HYP:
+		case IPA_RC_L2_MAC_NOT_AUTH_BY_ADP:
+			dev_warn(&card->gdev->dev,
+				"MAC address "
+				"%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
+				"is not authorized\n",
+				card->dev->dev_addr[0], card->dev->dev_addr[1],
+				card->dev->dev_addr[2], card->dev->dev_addr[3],
+				card->dev->dev_addr[4], card->dev->dev_addr[5]);
+			break;
+		default:
+			break;
+		}
 		cmd->hdr.return_code = -EIO;
 	} else {
 		card->info.mac_bits |= QETH_LAYER2_MAC_REGISTERED;
@@ -616,6 +641,7 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 {
 	struct qeth_card *card = dev->ml_priv;
 	struct dev_addr_list *dm;
+	struct netdev_hw_addr *ha;
 
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return ;
@@ -629,8 +655,8 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 	for (dm = dev->mc_list; dm; dm = dm->next)
 		qeth_l2_add_mc(card, dm->da_addr, 0);
 
-	for (dm = dev->uc_list; dm; dm = dm->next)
-		qeth_l2_add_mc(card, dm->da_addr, 1);
+	list_for_each_entry(ha, &dev->uc_list, list)
+		qeth_l2_add_mc(card, ha->addr, 1);
 
 	spin_unlock_bh(&card->mclock);
 	if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
@@ -839,6 +865,7 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&cgdev->dev);
 
+	qeth_set_allowed_threads(card, 0, 1);
 	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
 
 	if (cgdev->state == CCWGROUP_ONLINE) {
@@ -974,8 +1001,9 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 			dev_warn(&card->gdev->dev,
 				"The LAN is offline\n");
 			card->lan_online = 0;
+			return 0;
 		}
-		return rc;
+		goto out_remove;
 	} else
 		card->lan_online = 1;
 
@@ -1113,12 +1141,62 @@ static void qeth_l2_shutdown(struct ccwgroup_device *gdev)
 	qeth_clear_qdio_buffers(card);
 }
 
+static int qeth_l2_pm_suspend(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+
+	if (card->dev)
+		netif_device_detach(card->dev);
+	qeth_set_allowed_threads(card, 0, 1);
+	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
+	if (gdev->state == CCWGROUP_OFFLINE)
+		return 0;
+	if (card->state == CARD_STATE_UP) {
+		card->use_hard_stop = 1;
+		__qeth_l2_set_offline(card->gdev, 1);
+	} else
+		__qeth_l2_set_offline(card->gdev, 0);
+	return 0;
+}
+
+static int qeth_l2_pm_resume(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	int rc = 0;
+
+	if (gdev->state == CCWGROUP_OFFLINE)
+		goto out;
+
+	if (card->state == CARD_STATE_RECOVER) {
+		rc = __qeth_l2_set_online(card->gdev, 1);
+		if (rc) {
+			if (card->dev) {
+				rtnl_lock();
+				dev_close(card->dev);
+				rtnl_unlock();
+			}
+		}
+	} else
+		rc = __qeth_l2_set_online(card->gdev, 0);
+out:
+	qeth_set_allowed_threads(card, 0xffffffff, 0);
+	if (card->dev)
+		netif_device_attach(card->dev);
+	if (rc)
+		dev_warn(&card->gdev->dev, "The qeth device driver "
+			"failed to recover an error on the device\n");
+	return rc;
+}
+
 struct ccwgroup_driver qeth_l2_ccwgroup_driver = {
 	.probe = qeth_l2_probe_device,
 	.remove = qeth_l2_remove_device,
 	.set_online = qeth_l2_set_online,
 	.set_offline = qeth_l2_set_offline,
 	.shutdown = qeth_l2_shutdown,
+	.freeze = qeth_l2_pm_suspend,
+	.thaw = qeth_l2_pm_resume,
+	.restore = qeth_l2_pm_resume,
 };
 EXPORT_SYMBOL_GPL(qeth_l2_ccwgroup_driver);
 
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 0ba3817cb6a..54872406864 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1,7 +1,7 @@
 /*
  *  drivers/s390/net/qeth_l3_main.c
  *
- *    Copyright IBM Corp. 2007
+ *    Copyright IBM Corp. 2007, 2009
  *    Author(s): Utz Bacher <utz.bacher@de.ibm.com>,
  *		 Frank Pavlic <fpavlic@de.ibm.com>,
  *		 Thomas Spatzier <tspat@de.ibm.com>,
@@ -1920,16 +1920,22 @@ static inline __u16 qeth_l3_rebuild_skb(struct qeth_card *card,
 		 hdr->hdr.l3.vlan_id : *((u16 *)&hdr->hdr.l3.dest_addr[12]);
 	}
 
-	skb->ip_summed = card->options.checksum_type;
-	if (card->options.checksum_type == HW_CHECKSUMMING) {
+	switch (card->options.checksum_type) {
+	case SW_CHECKSUMMING:
+		skb->ip_summed = CHECKSUM_NONE;
+		break;
+	case NO_CHECKSUMMING:
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		break;
+	case HW_CHECKSUMMING:
 		if ((hdr->hdr.l3.ext_flags &
-		      (QETH_HDR_EXT_CSUM_HDR_REQ |
-		       QETH_HDR_EXT_CSUM_TRANSP_REQ)) ==
-		     (QETH_HDR_EXT_CSUM_HDR_REQ |
-		      QETH_HDR_EXT_CSUM_TRANSP_REQ))
+		    (QETH_HDR_EXT_CSUM_HDR_REQ |
+		     QETH_HDR_EXT_CSUM_TRANSP_REQ)) ==
+		    (QETH_HDR_EXT_CSUM_HDR_REQ |
+		     QETH_HDR_EXT_CSUM_TRANSP_REQ))
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		else
-			skb->ip_summed = SW_CHECKSUMMING;
+			skb->ip_summed = CHECKSUM_NONE;
 	}
 
 	return vlan_id;
@@ -2543,9 +2549,9 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 		/* IPv4 */
 		hdr->hdr.l3.flags = qeth_l3_get_qeth_hdr_flags4(cast_type);
 		memset(hdr->hdr.l3.dest_addr, 0, 12);
-		if ((skb->dst) && (skb->dst->neighbour)) {
+		if ((skb_dst(skb)) && (skb_dst(skb)->neighbour)) {
 			*((u32 *) (&hdr->hdr.l3.dest_addr[12])) =
-			    *((u32 *) skb->dst->neighbour->primary_key);
+			    *((u32 *) skb_dst(skb)->neighbour->primary_key);
 		} else {
 			/* fill in destination address used in ip header */
 			*((u32 *) (&hdr->hdr.l3.dest_addr[12])) =
@@ -2556,9 +2562,9 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 		hdr->hdr.l3.flags = qeth_l3_get_qeth_hdr_flags6(cast_type);
 		if (card->info.type == QETH_CARD_TYPE_IQD)
 			hdr->hdr.l3.flags &= ~QETH_HDR_PASSTHRU;
-		if ((skb->dst) && (skb->dst->neighbour)) {
+		if ((skb_dst(skb)) && (skb_dst(skb)->neighbour)) {
 			memcpy(hdr->hdr.l3.dest_addr,
-			       skb->dst->neighbour->primary_key, 16);
+			       skb_dst(skb)->neighbour->primary_key, 16);
 		} else {
 			/* fill in destination address used in ip header */
 			memcpy(hdr->hdr.l3.dest_addr,
@@ -3006,6 +3012,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 	card->dev->features |=	NETIF_F_HW_VLAN_TX |
 				NETIF_F_HW_VLAN_RX |
 				NETIF_F_HW_VLAN_FILTER;
+	card->dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 
 	SET_NETDEV_DEV(card->dev, &card->gdev->dev);
 	return register_netdev(card->dev);
@@ -3070,6 +3077,7 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&cgdev->dev);
 
+	qeth_set_allowed_threads(card, 0, 1);
 	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
 
 	if (cgdev->state == CCWGROUP_ONLINE) {
@@ -3141,8 +3149,9 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 			dev_warn(&card->gdev->dev,
 				"The LAN is offline\n");
 			card->lan_online = 0;
+			return 0;
 		}
-		return rc;
+		goto out_remove;
 	} else
 		card->lan_online = 1;
 	qeth_set_large_send(card, card->options.large_send);
@@ -3274,12 +3283,62 @@ static void qeth_l3_shutdown(struct ccwgroup_device *gdev)
 	qeth_clear_qdio_buffers(card);
 }
 
+static int qeth_l3_pm_suspend(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+
+	if (card->dev)
+		netif_device_detach(card->dev);
+	qeth_set_allowed_threads(card, 0, 1);
+	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
+	if (gdev->state == CCWGROUP_OFFLINE)
+		return 0;
+	if (card->state == CARD_STATE_UP) {
+		card->use_hard_stop = 1;
+		__qeth_l3_set_offline(card->gdev, 1);
+	} else
+		__qeth_l3_set_offline(card->gdev, 0);
+	return 0;
+}
+
+static int qeth_l3_pm_resume(struct ccwgroup_device *gdev)
+{
+	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	int rc = 0;
+
+	if (gdev->state == CCWGROUP_OFFLINE)
+		goto out;
+
+	if (card->state == CARD_STATE_RECOVER) {
+		rc = __qeth_l3_set_online(card->gdev, 1);
+		if (rc) {
+			if (card->dev) {
+				rtnl_lock();
+				dev_close(card->dev);
+				rtnl_unlock();
+			}
+		}
+	} else
+		rc = __qeth_l3_set_online(card->gdev, 0);
+out:
+	qeth_set_allowed_threads(card, 0xffffffff, 0);
+	if (card->dev)
+		netif_device_attach(card->dev);
+	if (rc)
+		dev_warn(&card->gdev->dev, "The qeth device driver "
+			"failed to recover an error on the device\n");
+	return rc;
+}
+
 struct ccwgroup_driver qeth_l3_ccwgroup_driver = {
 	.probe = qeth_l3_probe_device,
 	.remove = qeth_l3_remove_device,
 	.set_online = qeth_l3_set_online,
 	.set_offline = qeth_l3_set_offline,
 	.shutdown = qeth_l3_shutdown,
+	.freeze = qeth_l3_pm_suspend,
+	.thaw = qeth_l3_pm_resume,
+	.restore = qeth_l3_pm_resume,
 };
 EXPORT_SYMBOL_GPL(qeth_l3_ccwgroup_driver);
 
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index 164e090c262..e76a320d373 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -1,7 +1,8 @@
 /*
  * IUCV special message driver
  *
- * Copyright 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 2003, 2009
+ *
  * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
  *
  * This program is free software; you can redistribute it and/or modify
@@ -40,6 +41,8 @@ MODULE_AUTHOR
 MODULE_DESCRIPTION ("Linux for S/390 IUCV special message driver");
 
 static struct iucv_path *smsg_path;
+/* dummy device used as trigger for PM functions */
+static struct device *smsg_dev;
 
 static DEFINE_SPINLOCK(smsg_list_lock);
 static LIST_HEAD(smsg_list);
@@ -132,14 +135,51 @@ void smsg_unregister_callback(char *prefix,
 	kfree(cb);
 }
 
+static int smsg_pm_freeze(struct device *dev)
+{
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "smsg_pm_freeze\n");
+#endif
+	if (smsg_path)
+		iucv_path_sever(smsg_path, NULL);
+	return 0;
+}
+
+static int smsg_pm_restore_thaw(struct device *dev)
+{
+	int rc;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "smsg_pm_restore_thaw\n");
+#endif
+	if (smsg_path) {
+		memset(smsg_path, 0, sizeof(*smsg_path));
+		smsg_path->msglim = 255;
+		smsg_path->flags = 0;
+		rc = iucv_path_connect(smsg_path, &smsg_handler, "*MSG    ",
+				       NULL, NULL, NULL);
+		printk(KERN_ERR "iucv_path_connect returned with rc %i\n", rc);
+	}
+	return 0;
+}
+
+static struct dev_pm_ops smsg_pm_ops = {
+	.freeze = smsg_pm_freeze,
+	.thaw = smsg_pm_restore_thaw,
+	.restore = smsg_pm_restore_thaw,
+};
+
 static struct device_driver smsg_driver = {
+	.owner = THIS_MODULE,
 	.name = "SMSGIUCV",
 	.bus  = &iucv_bus,
+	.pm = &smsg_pm_ops,
 };
 
 static void __exit smsg_exit(void)
 {
 	cpcmd("SET SMSG IUCV", NULL, 0, NULL);
+	device_unregister(smsg_dev);
 	iucv_unregister(&smsg_handler, 1);
 	driver_unregister(&smsg_driver);
 }
@@ -166,12 +206,29 @@ static int __init smsg_init(void)
 	rc = iucv_path_connect(smsg_path, &smsg_handler, "*MSG    ",
 			       NULL, NULL, NULL);
 	if (rc)
-		goto out_free;
+		goto out_free_path;
+	smsg_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!smsg_dev) {
+		rc = -ENOMEM;
+		goto out_free_path;
+	}
+	dev_set_name(smsg_dev, "smsg_iucv");
+	smsg_dev->bus = &iucv_bus;
+	smsg_dev->parent = iucv_root;
+	smsg_dev->release = (void (*)(struct device *))kfree;
+	smsg_dev->driver = &smsg_driver;
+	rc = device_register(smsg_dev);
+	if (rc)
+		goto out_free_dev;
+
 	cpcmd("SET SMSG IUCV", NULL, 0, NULL);
 	return 0;
 
-out_free:
+out_free_dev:
+	kfree(smsg_dev);
+out_free_path:
 	iucv_path_free(smsg_path);
+	smsg_path = NULL;
 out_register:
 	iucv_unregister(&smsg_handler, 1);
 out_driver:
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index b2fe5cdbcae..d9da5c42ccb 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -13,6 +13,36 @@
 
 #define ZFCP_MODEL_PRIV 0x4
 
+static int zfcp_ccw_suspend(struct ccw_device *cdev)
+
+{
+	struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
+
+	down(&zfcp_data.config_sema);
+
+	zfcp_erp_adapter_shutdown(adapter, 0, "ccsusp1", NULL);
+	zfcp_erp_wait(adapter);
+
+	up(&zfcp_data.config_sema);
+
+	return 0;
+}
+
+static int zfcp_ccw_activate(struct ccw_device *cdev)
+
+{
+	struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
+
+	zfcp_erp_modify_adapter_status(adapter, "ccresu1", NULL,
+				       ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
+	zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
+				"ccresu2", NULL);
+	zfcp_erp_wait(adapter);
+	flush_work(&adapter->scan_work);
+
+	return 0;
+}
+
 static struct ccw_device_id zfcp_ccw_device_id[] = {
 	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
 	{ CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, ZFCP_MODEL_PRIV) },
@@ -227,6 +257,9 @@ static struct ccw_driver zfcp_ccw_driver = {
 	.set_offline = zfcp_ccw_set_offline,
 	.notify      = zfcp_ccw_notify,
 	.shutdown    = zfcp_ccw_shutdown,
+	.freeze      = zfcp_ccw_suspend,
+	.thaw	     = zfcp_ccw_activate,
+	.restore     = zfcp_ccw_activate,
 };
 
 /**
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index bb2752b4130..35493a82d2a 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -116,7 +116,7 @@ static void zfcp_wka_port_put(struct zfcp_wka_port *wka_port)
 {
 	if (atomic_dec_return(&wka_port->refcount) != 0)
 		return;
-	/* wait 10 miliseconds, other reqs might pop in */
+	/* wait 10 milliseconds, other reqs might pop in */
 	schedule_delayed_work(&wka_port->work, HZ / 100);
 }
 
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 124f660a038..75ac19b1192 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -303,7 +303,7 @@ static int openprom_sunos_ioctl(struct inode * inode, struct file * file,
 				struct device_node *dp)
 {
 	DATA *data = file->private_data;
-	struct openpromio *opp;
+	struct openpromio *opp = NULL;
 	int bufsize, error = 0;
 	static int cnt;
 	void __user *argp = (void __user *)arg;
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index ed0e3e55652..538135783aa 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -646,7 +646,7 @@ static int aha1740_probe (struct device *dev)
 
 static __devexit int aha1740_remove (struct device *dev)
 {
-	struct Scsi_Host *shpnt = dev->driver_data;
+	struct Scsi_Host *shpnt = dev_get_drvdata(dev);
 	struct aha1740_hostdata *host = HOSTDATA (shpnt);
 
 	scsi_remove_host(shpnt);
diff --git a/drivers/scsi/dpt/osd_util.h b/drivers/scsi/dpt/osd_util.h
index 4b56c0436ba..b2613c2eaac 100644
--- a/drivers/scsi/dpt/osd_util.h
+++ b/drivers/scsi/dpt/osd_util.h
@@ -342,7 +342,7 @@ uLONG osdGetThreadID(void);
 /* wakes up the specifed thread */
 void osdWakeThread(uLONG);
 
-/* osd sleep for x miliseconds */
+/* osd sleep for x milliseconds */
 void osdSleep(uLONG);
 
 #define DPT_THREAD_PRIORITY_LOWEST 0x00
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index e606b4829d4..c15878e8815 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -135,6 +135,58 @@ static struct scsi_host_template fcoe_shost_template = {
 };
 
 /**
+ * fcoe_fip_recv - handle a received FIP frame.
+ * @skb: the receive skb
+ * @dev: associated &net_device
+ * @ptype: the &packet_type structure which was used to register this handler.
+ * @orig_dev: original receive &net_device, in case @dev is a bond.
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *dev,
+			 struct packet_type *ptype,
+			 struct net_device *orig_dev)
+{
+	struct fcoe_softc *fc;
+
+	fc = container_of(ptype, struct fcoe_softc, fip_packet_type);
+	fcoe_ctlr_recv(&fc->ctlr, skb);
+	return 0;
+}
+
+/**
+ * fcoe_fip_send() - send an Ethernet-encapsulated FIP frame.
+ * @fip: FCoE controller.
+ * @skb: FIP Packet.
+ */
+static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
+{
+	skb->dev = fcoe_from_ctlr(fip)->real_dev;
+	dev_queue_xmit(skb);
+}
+
+/**
+ * fcoe_update_src_mac() - Update Ethernet MAC filters.
+ * @fip: FCoE controller.
+ * @old: Unicast MAC address to delete if the MAC is non-zero.
+ * @new: Unicast MAC address to add.
+ *
+ * Remove any previously-set unicast MAC filter.
+ * Add secondary FCoE MAC address filter for our OUI.
+ */
+static void fcoe_update_src_mac(struct fcoe_ctlr *fip, u8 *old, u8 *new)
+{
+	struct fcoe_softc *fc;
+
+	fc = fcoe_from_ctlr(fip);
+	rtnl_lock();
+	if (!is_zero_ether_addr(old))
+		dev_unicast_delete(fc->real_dev, old);
+	dev_unicast_add(fc->real_dev, new);
+	rtnl_unlock();
+}
+
+/**
  * fcoe_lport_config() - sets up the fc_lport
  * @lp: ptr to the fc_lport
  *
@@ -167,6 +219,30 @@ static int fcoe_lport_config(struct fc_lport *lp)
 }
 
 /**
+ * fcoe_netdev_cleanup() - clean up netdev configurations
+ * @fc: ptr to the fcoe_softc
+ */
+void fcoe_netdev_cleanup(struct fcoe_softc *fc)
+{
+	u8 flogi_maddr[ETH_ALEN];
+
+	/* Don't listen for Ethernet packets anymore */
+	dev_remove_pack(&fc->fcoe_packet_type);
+	dev_remove_pack(&fc->fip_packet_type);
+
+	/* Delete secondary MAC addresses */
+	rtnl_lock();
+	memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
+	dev_unicast_delete(fc->real_dev, flogi_maddr);
+	if (!is_zero_ether_addr(fc->ctlr.data_src_addr))
+		dev_unicast_delete(fc->real_dev, fc->ctlr.data_src_addr);
+	if (fc->ctlr.spma)
+		dev_unicast_delete(fc->real_dev, fc->ctlr.ctl_src_addr);
+	dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
+	rtnl_unlock();
+}
+
+/**
  * fcoe_queue_timer() - fcoe queue timer
  * @lp: the fc_lport pointer
  *
@@ -193,6 +269,7 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	u64 wwnn, wwpn;
 	struct fcoe_softc *fc;
 	u8 flogi_maddr[ETH_ALEN];
+	struct netdev_hw_addr *ha;
 
 	/* Setup lport private data to point to fcoe softc */
 	fc = lport_priv(lp);
@@ -250,9 +327,23 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	fc->fcoe_pending_queue_active = 0;
 	setup_timer(&fc->timer, fcoe_queue_timer, (unsigned long)lp);
 
+	/* look for SAN MAC address, if multiple SAN MACs exist, only
+	 * use the first one for SPMA */
+	rcu_read_lock();
+	for_each_dev_addr(netdev, ha) {
+		if ((ha->type == NETDEV_HW_ADDR_T_SAN) &&
+		    (is_valid_ether_addr(fc->ctlr.ctl_src_addr))) {
+			memcpy(fc->ctlr.ctl_src_addr, ha->addr, ETH_ALEN);
+			fc->ctlr.spma = 1;
+			break;
+		}
+	}
+	rcu_read_unlock();
+
 	/* setup Source Mac Address */
-	memcpy(fc->ctlr.ctl_src_addr, fc->real_dev->dev_addr,
-	       fc->real_dev->addr_len);
+	if (!fc->ctlr.spma)
+		memcpy(fc->ctlr.ctl_src_addr, fc->real_dev->dev_addr,
+		       fc->real_dev->addr_len);
 
 	wwnn = fcoe_wwn_from_mac(fc->real_dev->dev_addr, 1, 0);
 	fc_set_wwnn(lp, wwnn);
@@ -267,7 +358,9 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	 */
 	rtnl_lock();
 	memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
-	dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN);
+	dev_unicast_add(fc->real_dev, flogi_maddr);
+	if (fc->ctlr.spma)
+		dev_unicast_add(fc->real_dev, fc->ctlr.ctl_src_addr);
 	dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
 	rtnl_unlock();
 
@@ -280,6 +373,11 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	fc->fcoe_packet_type.dev = fc->real_dev;
 	dev_add_pack(&fc->fcoe_packet_type);
 
+	fc->fip_packet_type.func = fcoe_fip_recv;
+	fc->fip_packet_type.type = htons(ETH_P_FIP);
+	fc->fip_packet_type.dev = fc->real_dev;
+	dev_add_pack(&fc->fip_packet_type);
+
 	return 0;
 }
 
@@ -347,7 +445,6 @@ static int fcoe_if_destroy(struct net_device *netdev)
 {
 	struct fc_lport *lp = NULL;
 	struct fcoe_softc *fc;
-	u8 flogi_maddr[ETH_ALEN];
 
 	BUG_ON(!netdev);
 
@@ -366,9 +463,10 @@ static int fcoe_if_destroy(struct net_device *netdev)
 	/* Remove the instance from fcoe's list */
 	fcoe_hostlist_remove(lp);
 
-	/* Don't listen for Ethernet packets anymore */
-	dev_remove_pack(&fc->fcoe_packet_type);
-	dev_remove_pack(&fc->fip_packet_type);
+	/* clean up netdev configurations */
+	fcoe_netdev_cleanup(fc);
+
+	/* tear-down the FCoE controller */
 	fcoe_ctlr_destroy(&fc->ctlr);
 
 	/* Cleanup the fc_lport */
@@ -383,16 +481,6 @@ static int fcoe_if_destroy(struct net_device *netdev)
 	if (lp->emp)
 		fc_exch_mgr_free(lp->emp);
 
-	/* Delete secondary MAC addresses */
-	rtnl_lock();
-	memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
-	dev_unicast_delete(fc->real_dev, flogi_maddr, ETH_ALEN);
-	if (!is_zero_ether_addr(fc->ctlr.data_src_addr))
-		dev_unicast_delete(fc->real_dev,
-				   fc->ctlr.data_src_addr, ETH_ALEN);
-	dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
-	rtnl_unlock();
-
 	/* Free the per-CPU receive threads */
 	fcoe_percpu_clean(lp);
 
@@ -455,58 +543,6 @@ static struct libfc_function_template fcoe_libfc_fcn_templ = {
 };
 
 /**
- * fcoe_fip_recv - handle a received FIP frame.
- * @skb: the receive skb
- * @dev: associated &net_device
- * @ptype: the &packet_type structure which was used to register this handler.
- * @orig_dev: original receive &net_device, in case @dev is a bond.
- *
- * Returns: 0 for success
- */
-static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *dev,
-			 struct packet_type *ptype,
-			 struct net_device *orig_dev)
-{
-	struct fcoe_softc *fc;
-
-	fc = container_of(ptype, struct fcoe_softc, fip_packet_type);
-	fcoe_ctlr_recv(&fc->ctlr, skb);
-	return 0;
-}
-
-/**
- * fcoe_fip_send() - send an Ethernet-encapsulated FIP frame.
- * @fip: FCoE controller.
- * @skb: FIP Packet.
- */
-static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
-{
-	skb->dev = fcoe_from_ctlr(fip)->real_dev;
-	dev_queue_xmit(skb);
-}
-
-/**
- * fcoe_update_src_mac() - Update Ethernet MAC filters.
- * @fip: FCoE controller.
- * @old: Unicast MAC address to delete if the MAC is non-zero.
- * @new: Unicast MAC address to add.
- *
- * Remove any previously-set unicast MAC filter.
- * Add secondary FCoE MAC address filter for our OUI.
- */
-static void fcoe_update_src_mac(struct fcoe_ctlr *fip, u8 *old, u8 *new)
-{
-	struct fcoe_softc *fc;
-
-	fc = fcoe_from_ctlr(fip);
-	rtnl_lock();
-	if (!is_zero_ether_addr(old))
-		dev_unicast_delete(fc->real_dev, old, ETH_ALEN);
-	dev_unicast_add(fc->real_dev, new, ETH_ALEN);
-	rtnl_unlock();
-}
-
-/**
  * fcoe_if_create() - this function creates the fcoe interface
  * @netdev: pointer the associated netdevice
  *
@@ -547,13 +583,6 @@ static int fcoe_if_create(struct net_device *netdev)
 		goto out_host_put;
 	}
 
-	/* configure lport network properties */
-	rc = fcoe_netdev_config(lp, netdev);
-	if (rc) {
-		FC_DBG("Could not configure netdev for lport\n");
-		goto out_host_put;
-	}
-
 	/*
 	 * Initialize FIP.
 	 */
@@ -561,23 +590,25 @@ static int fcoe_if_create(struct net_device *netdev)
 	fc->ctlr.send = fcoe_fip_send;
 	fc->ctlr.update_mac = fcoe_update_src_mac;
 
-	fc->fip_packet_type.func = fcoe_fip_recv;
-	fc->fip_packet_type.type = htons(ETH_P_FIP);
-	fc->fip_packet_type.dev = fc->real_dev;
-	dev_add_pack(&fc->fip_packet_type);
+	/* configure lport network properties */
+	rc = fcoe_netdev_config(lp, netdev);
+	if (rc) {
+		FC_DBG("Could not configure netdev for the interface\n");
+		goto out_netdev_cleanup;
+	}
 
 	/* configure lport scsi host properties */
 	rc = fcoe_shost_config(lp, shost, &netdev->dev);
 	if (rc) {
 		FC_DBG("Could not configure shost for lport\n");
-		goto out_host_put;
+		goto out_netdev_cleanup;
 	}
 
 	/* lport exch manager allocation */
 	rc = fcoe_em_config(lp);
 	if (rc) {
 		FC_DBG("Could not configure em for lport\n");
-		goto out_host_put;
+		goto out_netdev_cleanup;
 	}
 
 	/* Initialize the library */
@@ -603,6 +634,8 @@ static int fcoe_if_create(struct net_device *netdev)
 
 out_lp_destroy:
 	fc_exch_mgr_free(lp->emp); /* Free the EM */
+out_netdev_cleanup:
+	fcoe_netdev_cleanup(fc);
 out_host_put:
 	scsi_host_put(lp->host);
 	return rc;
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 929411880e4..2f5bc7fd3fa 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -198,6 +198,8 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf)
 	sol->fip.fip_subcode = FIP_SC_SOL;
 	sol->fip.fip_dl_len = htons(sizeof(sol->desc) / FIP_BPW);
 	sol->fip.fip_flags = htons(FIP_FL_FPMA);
+	if (fip->spma)
+		sol->fip.fip_flags |= htons(FIP_FL_SPMA);
 
 	sol->desc.mac.fd_desc.fip_dtype = FIP_DT_MAC;
 	sol->desc.mac.fd_desc.fip_dlen = sizeof(sol->desc.mac) / FIP_BPW;
@@ -350,6 +352,8 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, int ports, u8 *sa)
 	kal->fip.fip_dl_len = htons((sizeof(kal->mac) +
 				    ports * sizeof(*vn)) / FIP_BPW);
 	kal->fip.fip_flags = htons(FIP_FL_FPMA);
+	if (fip->spma)
+		kal->fip.fip_flags |= htons(FIP_FL_SPMA);
 
 	kal->mac.fd_desc.fip_dtype = FIP_DT_MAC;
 	kal->mac.fd_desc.fip_dlen = sizeof(kal->mac) / FIP_BPW;
@@ -413,6 +417,8 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip,
 	cap->fip.fip_subcode = FIP_SC_REQ;
 	cap->fip.fip_dl_len = htons((dlen + sizeof(*mac)) / FIP_BPW);
 	cap->fip.fip_flags = htons(FIP_FL_FPMA);
+	if (fip->spma)
+		cap->fip.fip_flags |= htons(FIP_FL_SPMA);
 
 	cap->encaps.fd_desc.fip_dtype = dtype;
 	cap->encaps.fd_desc.fip_dlen = dlen / FIP_BPW;
@@ -421,8 +427,10 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip,
 	memset(mac, 0, sizeof(mac));
 	mac->fd_desc.fip_dtype = FIP_DT_MAC;
 	mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW;
-	if (dtype != ELS_FLOGI)
+	if (dtype != FIP_DT_FLOGI)
 		memcpy(mac->fd_mac, fip->data_src_addr, ETH_ALEN);
+	else if (fip->spma)
+		memcpy(mac->fd_mac, fip->ctl_src_addr, ETH_ALEN);
 
 	skb->protocol = htons(ETH_P_FIP);
 	skb_reset_mac_header(skb);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 11d2602ae88..869a11bdccb 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1877,7 +1877,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	unsigned long wait_switch = 0;
 	int rc;
 
-	vdev->dev.driver_data = NULL;
+	dev_set_drvdata(&vdev->dev, NULL);
 
 	host = scsi_host_alloc(&driver_template, sizeof(*hostdata));
 	if (!host) {
@@ -1949,7 +1949,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 			scsi_scan_host(host);
 	}
 
-	vdev->dev.driver_data = hostdata;
+	dev_set_drvdata(&vdev->dev, hostdata);
 	return 0;
 
       add_srp_port_failed:
@@ -1968,7 +1968,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 
 static int ibmvscsi_remove(struct vio_dev *vdev)
 {
-	struct ibmvscsi_host_data *hostdata = vdev->dev.driver_data;
+	struct ibmvscsi_host_data *hostdata = dev_get_drvdata(&vdev->dev);
 	unmap_persist_bufs(hostdata);
 	release_event_pool(&hostdata->pool, hostdata);
 	ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata,
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index e2dd6a45924..d5eaf972710 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -892,7 +892,7 @@ free_vport:
 
 static int ibmvstgt_remove(struct vio_dev *dev)
 {
-	struct srp_target *target = (struct srp_target *) dev->dev.driver_data;
+	struct srp_target *target = dev_get_drvdata(&dev->dev);
 	struct Scsi_Host *shost = target->shost;
 	struct vio_port *vport = target->ldata;
 
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index 15e2d132e8b..2742ae8a3d0 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -135,7 +135,7 @@ int srp_target_alloc(struct srp_target *target, struct device *dev,
 	INIT_LIST_HEAD(&target->cmd_queue);
 
 	target->dev = dev;
-	target->dev->driver_data = target;
+	dev_set_drvdata(target->dev, target);
 
 	target->srp_iu_size = iu_size;
 	target->rx_ring_size = nr;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 2b02b1fb39a..8d0f0de76b6 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -53,8 +53,7 @@
  * debugfs interface
  *
  * To access this interface the user should:
- * # mkdir /debug
- * # mount -t debugfs none /debug
+ * # mount -t debugfs none /sys/kernel/debug
  *
  * The lpfc debugfs directory hierarchy is:
  * lpfc/lpfcX/vportY
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index e9fa6762044..7991ba1980a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1174,8 +1174,8 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
  * @reftag:         out: ref tag (reference tag)
  *
  * Description:
- *   Extract DIF paramters from the command if possible.  Otherwise,
- *   use default paratmers.
+ *   Extract DIF parameters from the command if possible.  Otherwise,
+ *   use default parameters.
  *
  **/
 static inline void
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 795201fa0b4..512c2cc1a33 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -469,7 +469,7 @@ typedef struct {
 	u8	type;		/* Type of the device */
 	u8	cur_status;	/* current status of the device */
 	u8	tag_depth;	/* Level of tagging */
-	u8	sync_neg;	/* sync negotiation - ENABLE or DISBALE */
+	u8	sync_neg;	/* sync negotiation - ENABLE or DISABLE */
 	u32	size;		/* configurable size in terms of 512 byte
 				   blocks */
 }__attribute__ ((packed)) phys_drv;
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index 170399ef06f..b25b74764ec 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -686,7 +686,7 @@ typedef struct {
  * @type	: Type of the device
  * @cur_status	: current status of the device
  * @tag_depth	: Level of tagging
- * @sync_neg	: sync negotiation - ENABLE or DISBALE
+ * @sync_neg	: sync negotiation - ENABLE or DISABLE
  * @size	: configurable size in terms of 512 byte
  */
 typedef struct {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 641e800ed69..1132c5cae7a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -861,7 +861,7 @@ config SERIAL_UARTLITE
 	  Say Y here if you want to use the Xilinx uartlite serial controller.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called uartlite.ko.
+	  module will be called uartlite.
 
 config SERIAL_UARTLITE_CONSOLE
 	bool "Support for console on Xilinx uartlite serial port"
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index cdc049d4350..58a4879c7e4 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -686,7 +686,7 @@ static int pl010_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	base = ioremap(dev->res.start, PAGE_SIZE);
+	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
 		goto free;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 88fdac51b6c..bf82e28770a 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -70,6 +70,23 @@ struct uart_amba_port {
 	struct clk		*clk;
 	unsigned int		im;	/* interrupt mask */
 	unsigned int		old_status;
+	unsigned int		ifls;	/* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+	unsigned int		ifls;
+	unsigned int		fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+	.fifosize		= 16,
+};
+
+static struct vendor_data vendor_st = {
+	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+	.fifosize		= 64,
 };
 
 static void pl011_stop_tx(struct uart_port *port)
@@ -360,8 +377,7 @@ static int pl011_startup(struct uart_port *port)
 	if (retval)
 		goto clk_dis;
 
-	writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
-	       uap->port.membase + UART011_IFLS);
+	writew(uap->ifls, uap->port.membase + UART011_IFLS);
 
 	/*
 	 * Provoke TX FIFO interrupt into asserting.
@@ -732,6 +748,7 @@ static struct uart_driver amba_reg = {
 static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
+	struct vendor_data *vendor = id->data;
 	void __iomem *base;
 	int i, ret;
 
@@ -750,7 +767,7 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	base = ioremap(dev->res.start, PAGE_SIZE);
+	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
 		goto free;
@@ -762,12 +779,13 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 		goto unmap;
 	}
 
+	uap->ifls = vendor->ifls;
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
 	uap->port.iotype = UPIO_MEM;
 	uap->port.irq = dev->irq[0];
-	uap->port.fifosize = 16;
+	uap->port.fifosize = vendor->fifosize;
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
@@ -812,6 +830,12 @@ static struct amba_id pl011_ids[] __initdata = {
 	{
 		.id	= 0x00041011,
 		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		.id	= 0x00380802,
+		.mask	= 0x00ffffff,
+		.data	= &vendor_st,
 	},
 	{ 0, 0 },
 };
@@ -845,7 +869,11 @@ static void __exit pl011_exit(void)
 	uart_unregister_driver(&amba_reg);
 }
 
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
 module_exit(pl011_exit);
 
 MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index b3497d7e535..338b15c0a54 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1104,11 +1104,13 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	/* update the per-port timeout */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	/* save/disable interrupts and drain transmitter */
+	/*
+	 * save/disable interrupts. The tty layer will ensure that the
+	 * transmitter is empty if requested by the caller, so there's
+	 * no need to wait for it here.
+	 */
 	imr = UART_GET_IMR(port);
 	UART_PUT_IDR(port, -1);
-	while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
-		cpu_relax();
 
 	/* disable receiver and transmitter */
 	UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 7b5d1de9cfe..5d7b58f1fe4 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -71,7 +71,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -101,7 +101,7 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -132,7 +132,7 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
 #define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
 #endif
@@ -186,13 +186,6 @@
 #define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR	204
-#define MINOR_START		41
-#define DEV_NAME		"ttySMX"
-#define MAX_INTERNAL_IRQ	IMX_IRQS
-#endif
-
 #ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
@@ -931,11 +924,13 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	rational_best_approximation(16 * div * baud, sport->port.uartclk,
 		1 << 16, 1 << 16, &num, &denom);
 
-	tdiv64 = sport->port.uartclk;
-	tdiv64 *= num;
-	do_div(tdiv64, denom * 16 * div);
-	tty_encode_baud_rate(sport->port.info->port.tty,
-		(speed_t)tdiv64, (speed_t)tdiv64);
+	if (port->info && port->info->port.tty) {
+		tdiv64 = sport->port.uartclk;
+		tdiv64 *= num;
+		do_div(tdiv64, denom * 16 * div);
+		tty_encode_baud_rate(sport->port.info->port.tty,
+				(speed_t)tdiv64, (speed_t)tdiv64);
+	}
 
 	num -= 1;
 	denom -= 1;
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 14f8fa9135b..54483cd3529 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -122,7 +122,7 @@ static int __devinit of_platform_serial_probe(struct of_device *ofdev,
 
 	info->type = port_type;
 	info->line = ret;
-	ofdev->dev.driver_data = info;
+	dev_set_drvdata(&ofdev->dev, info);
 	return 0;
 out:
 	kfree(info);
@@ -135,7 +135,7 @@ out:
  */
 static int of_platform_serial_remove(struct of_device *ofdev)
 {
-	struct of_serial_info *info = ofdev->dev.driver_data;
+	struct of_serial_info *info = dev_get_drvdata(&ofdev->dev);
 	switch (info->type) {
 #ifdef CONFIG_SERIAL_8250
 	case PORT_8250 ... PORT_MAX_8250:
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7546aa887fa..79c9c5f5cdb 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -681,7 +681,7 @@ static int serial_config(struct pcmcia_device * link)
 	u_char *buf;
 	cisparse_t *parse;
 	cistpl_cftable_entry_t *cf;
-	int i;
+	int i, last_ret, last_fn;
 
 	DEBUG(0, "serial_config(0x%p)\n", link);
 
@@ -699,6 +699,16 @@ static int serial_config(struct pcmcia_device * link)
 	tuple->TupleDataMax = 255;
 	tuple->Attributes = 0;
 
+	/* Get configuration register information */
+	tuple->DesiredTuple = CISTPL_CONFIG;
+	last_ret = first_tuple(link, tuple, parse);
+	if (last_ret != 0) {
+		last_fn = ParseTuple;
+		goto cs_failed;
+	}
+	link->conf.ConfigBase = parse->config.base;
+	link->conf.Present = parse->config.rmask[0];
+
 	/* Is this a compliant multifunction card? */
 	tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
 	tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
@@ -761,7 +771,9 @@ static int serial_config(struct pcmcia_device * link)
 	kfree(cfg_mem);
 	return 0;
 
- failed:
+cs_failed:
+	cs_error(link, last_fn, last_ret);
+failed:
 	serial_remove(link);
 	kfree(cfg_mem);
 	return -ENODEV;
@@ -863,10 +875,10 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"),  /* Sierra Wireless AC850 3G Network Adapter R1 */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"),	/* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 95749477541..e8aae227b5e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@ config SPI_GPIO
 
 config SPI_IMX
 	tristate "Freescale iMX SPI controller"
-	depends on ARCH_IMX && EXPERIMENTAL
+	depends on ARCH_MX1 && EXPERIMENTAL
 	help
 	  This enables using the Freescale iMX SPI controller in master
 	  mode.
@@ -171,6 +171,15 @@ config SPI_ORION
 	help
 	  This enables using the SPI master controller on the Orion chips.
 
+config SPI_PL022
+	tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
+	depends on ARM_AMBA && EXPERIMENTAL
+	default y if MACH_U300
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
+	  controller. If you have an embedded system with an AMBA(R)
+	  bus and a PL022 controller, say Y or M here.
+
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
 	depends on ARCH_PXA && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5d0451936d8..ecfadb18048 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
 obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
 obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
+obj-$(CONFIG_SPI_PL022)			+= amba-pl022.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
new file mode 100644
index 00000000000..da76797ce8b
--- /dev/null
+++ b/drivers/spi/amba-pl022.c
@@ -0,0 +1,1866 @@
+/*
+ * drivers/spi/amba-pl022.c
+ *
+ * A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * TODO:
+ * - add timeout on polled transfers
+ * - add generic DMA framework support
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+/*
+ * This macro is used to define some register default values.
+ * reg is masked with mask, the OR:ed with an (again masked)
+ * val shifted sb steps to the left.
+ */
+#define SSP_WRITE_BITS(reg, val, mask, sb) \
+ ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask))))
+
+/*
+ * This macro is also used to define some default values.
+ * It will just shift val by sb steps to the left and mask
+ * the result with mask.
+ */
+#define GEN_MASK_BITS(val, mask, sb) \
+ (((val)<<(sb)) & (mask))
+
+#define DRIVE_TX		0
+#define DO_NOT_DRIVE_TX		1
+
+#define DO_NOT_QUEUE_DMA	0
+#define QUEUE_DMA		1
+
+#define RX_TRANSFER		1
+#define TX_TRANSFER		2
+
+/*
+ * Macros to access SSP Registers with their offsets
+ */
+#define SSP_CR0(r)	(r + 0x000)
+#define SSP_CR1(r)	(r + 0x004)
+#define SSP_DR(r)	(r + 0x008)
+#define SSP_SR(r)	(r + 0x00C)
+#define SSP_CPSR(r)	(r + 0x010)
+#define SSP_IMSC(r)	(r + 0x014)
+#define SSP_RIS(r)	(r + 0x018)
+#define SSP_MIS(r)	(r + 0x01C)
+#define SSP_ICR(r)	(r + 0x020)
+#define SSP_DMACR(r)	(r + 0x024)
+#define SSP_ITCR(r)	(r + 0x080)
+#define SSP_ITIP(r)	(r + 0x084)
+#define SSP_ITOP(r)	(r + 0x088)
+#define SSP_TDR(r)	(r + 0x08C)
+
+#define SSP_PID0(r)	(r + 0xFE0)
+#define SSP_PID1(r)	(r + 0xFE4)
+#define SSP_PID2(r)	(r + 0xFE8)
+#define SSP_PID3(r)	(r + 0xFEC)
+
+#define SSP_CID0(r)	(r + 0xFF0)
+#define SSP_CID1(r)	(r + 0xFF4)
+#define SSP_CID2(r)	(r + 0xFF8)
+#define SSP_CID3(r)	(r + 0xFFC)
+
+/*
+ * SSP Control Register 0  - SSP_CR0
+ */
+#define SSP_CR0_MASK_DSS	(0x1FUL << 0)
+#define SSP_CR0_MASK_HALFDUP	(0x1UL << 5)
+#define SSP_CR0_MASK_SPO	(0x1UL << 6)
+#define SSP_CR0_MASK_SPH	(0x1UL << 7)
+#define SSP_CR0_MASK_SCR	(0xFFUL << 8)
+#define SSP_CR0_MASK_CSS	(0x1FUL << 16)
+#define SSP_CR0_MASK_FRF	(0x3UL << 21)
+
+/*
+ * SSP Control Register 0  - SSP_CR1
+ */
+#define SSP_CR1_MASK_LBM	(0x1UL << 0)
+#define SSP_CR1_MASK_SSE	(0x1UL << 1)
+#define SSP_CR1_MASK_MS		(0x1UL << 2)
+#define SSP_CR1_MASK_SOD	(0x1UL << 3)
+#define SSP_CR1_MASK_RENDN	(0x1UL << 4)
+#define SSP_CR1_MASK_TENDN	(0x1UL << 5)
+#define SSP_CR1_MASK_MWAIT	(0x1UL << 6)
+#define SSP_CR1_MASK_RXIFLSEL	(0x7UL << 7)
+#define SSP_CR1_MASK_TXIFLSEL	(0x7UL << 10)
+
+/*
+ * SSP Data Register - SSP_DR
+ */
+#define SSP_DR_MASK_DATA	0xFFFFFFFF
+
+/*
+ * SSP Status Register - SSP_SR
+ */
+#define SSP_SR_MASK_TFE		(0x1UL << 0) /* Transmit FIFO empty */
+#define SSP_SR_MASK_TNF		(0x1UL << 1) /* Transmit FIFO not full */
+#define SSP_SR_MASK_RNE		(0x1UL << 2) /* Receive FIFO not empty */
+#define SSP_SR_MASK_RFF 	(0x1UL << 3) /* Receive FIFO full */
+#define SSP_SR_MASK_BSY		(0x1UL << 4) /* Busy Flag */
+
+/*
+ * SSP Clock Prescale Register  - SSP_CPSR
+ */
+#define SSP_CPSR_MASK_CPSDVSR	(0xFFUL << 0)
+
+/*
+ * SSP Interrupt Mask Set/Clear Register - SSP_IMSC
+ */
+#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */
+#define SSP_IMSC_MASK_RTIM  (0x1UL << 1) /* Receive timeout Interrupt mask */
+#define SSP_IMSC_MASK_RXIM  (0x1UL << 2) /* Receive FIFO Interrupt mask */
+#define SSP_IMSC_MASK_TXIM  (0x1UL << 3) /* Transmit FIFO Interrupt mask */
+
+/*
+ * SSP Raw Interrupt Status Register - SSP_RIS
+ */
+/* Receive Overrun Raw Interrupt status */
+#define SSP_RIS_MASK_RORRIS		(0x1UL << 0)
+/* Receive Timeout Raw Interrupt status */
+#define SSP_RIS_MASK_RTRIS		(0x1UL << 1)
+/* Receive FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_RXRIS		(0x1UL << 2)
+/* Transmit FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_TXRIS		(0x1UL << 3)
+
+/*
+ * SSP Masked Interrupt Status Register - SSP_MIS
+ */
+/* Receive Overrun Masked Interrupt status */
+#define SSP_MIS_MASK_RORMIS		(0x1UL << 0)
+/* Receive Timeout Masked Interrupt status */
+#define SSP_MIS_MASK_RTMIS		(0x1UL << 1)
+/* Receive FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_RXMIS		(0x1UL << 2)
+/* Transmit FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_TXMIS		(0x1UL << 3)
+
+/*
+ * SSP Interrupt Clear Register - SSP_ICR
+ */
+/* Receive Overrun Raw Clear Interrupt bit */
+#define SSP_ICR_MASK_RORIC		(0x1UL << 0)
+/* Receive Timeout Clear Interrupt bit */
+#define SSP_ICR_MASK_RTIC		(0x1UL << 1)
+
+/*
+ * SSP DMA Control Register - SSP_DMACR
+ */
+/* Receive DMA Enable bit */
+#define SSP_DMACR_MASK_RXDMAE		(0x1UL << 0)
+/* Transmit DMA Enable bit */
+#define SSP_DMACR_MASK_TXDMAE		(0x1UL << 1)
+
+/*
+ * SSP Integration Test control Register - SSP_ITCR
+ */
+#define SSP_ITCR_MASK_ITEN		(0x1UL << 0)
+#define SSP_ITCR_MASK_TESTFIFO		(0x1UL << 1)
+
+/*
+ * SSP Integration Test Input Register - SSP_ITIP
+ */
+#define ITIP_MASK_SSPRXD		 (0x1UL << 0)
+#define ITIP_MASK_SSPFSSIN		 (0x1UL << 1)
+#define ITIP_MASK_SSPCLKIN		 (0x1UL << 2)
+#define ITIP_MASK_RXDMAC		 (0x1UL << 3)
+#define ITIP_MASK_TXDMAC		 (0x1UL << 4)
+#define ITIP_MASK_SSPTXDIN		 (0x1UL << 5)
+
+/*
+ * SSP Integration Test output Register - SSP_ITOP
+ */
+#define ITOP_MASK_SSPTXD		 (0x1UL << 0)
+#define ITOP_MASK_SSPFSSOUT		 (0x1UL << 1)
+#define ITOP_MASK_SSPCLKOUT		 (0x1UL << 2)
+#define ITOP_MASK_SSPOEn		 (0x1UL << 3)
+#define ITOP_MASK_SSPCTLOEn		 (0x1UL << 4)
+#define ITOP_MASK_RORINTR		 (0x1UL << 5)
+#define ITOP_MASK_RTINTR		 (0x1UL << 6)
+#define ITOP_MASK_RXINTR		 (0x1UL << 7)
+#define ITOP_MASK_TXINTR		 (0x1UL << 8)
+#define ITOP_MASK_INTR			 (0x1UL << 9)
+#define ITOP_MASK_RXDMABREQ		 (0x1UL << 10)
+#define ITOP_MASK_RXDMASREQ		 (0x1UL << 11)
+#define ITOP_MASK_TXDMABREQ		 (0x1UL << 12)
+#define ITOP_MASK_TXDMASREQ		 (0x1UL << 13)
+
+/*
+ * SSP Test Data Register - SSP_TDR
+ */
+#define TDR_MASK_TESTDATA 		(0xFFFFFFFF)
+
+/*
+ * Message State
+ * we use the spi_message.state (void *) pointer to
+ * hold a single state value, that's why all this
+ * (void *) casting is done here.
+ */
+#define STATE_START                     ((void *) 0)
+#define STATE_RUNNING                   ((void *) 1)
+#define STATE_DONE                      ((void *) 2)
+#define STATE_ERROR                     ((void *) -1)
+
+/*
+ * Queue State
+ */
+#define QUEUE_RUNNING                   (0)
+#define QUEUE_STOPPED                   (1)
+/*
+ * SSP State - Whether Enabled or Disabled
+ */
+#define SSP_DISABLED 			(0)
+#define SSP_ENABLED 			(1)
+
+/*
+ * SSP DMA State - Whether DMA Enabled or Disabled
+ */
+#define SSP_DMA_DISABLED 		(0)
+#define SSP_DMA_ENABLED 		(1)
+
+/*
+ * SSP Clock Defaults
+ */
+#define NMDK_SSP_DEFAULT_CLKRATE 0x2
+#define NMDK_SSP_DEFAULT_PRESCALE 0x40
+
+/*
+ * SSP Clock Parameter ranges
+ */
+#define CPSDVR_MIN 0x02
+#define CPSDVR_MAX 0xFE
+#define SCR_MIN 0x00
+#define SCR_MAX 0xFF
+
+/*
+ * SSP Interrupt related Macros
+ */
+#define DEFAULT_SSP_REG_IMSC  0x0UL
+#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
+#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC)
+
+#define CLEAR_ALL_INTERRUPTS  0x3
+
+
+/*
+ * The type of reading going on on this chip
+ */
+enum ssp_reading {
+	READING_NULL,
+	READING_U8,
+	READING_U16,
+	READING_U32
+};
+
+/**
+ * The type of writing going on on this chip
+ */
+enum ssp_writing {
+	WRITING_NULL,
+	WRITING_U8,
+	WRITING_U16,
+	WRITING_U32
+};
+
+/**
+ * struct vendor_data - vendor-specific config parameters
+ * for PL022 derivates
+ * @fifodepth: depth of FIFOs (both)
+ * @max_bpw: maximum number of bits per word
+ * @unidir: supports unidirection transfers
+ */
+struct vendor_data {
+	int fifodepth;
+	int max_bpw;
+	bool unidir;
+};
+
+/**
+ * struct pl022 - This is the private SSP driver data structure
+ * @adev: AMBA device model hookup
+ * @phybase: The physical memory where the SSP device resides
+ * @virtbase: The virtual memory where the SSP is mapped
+ * @master: SPI framework hookup
+ * @master_info: controller-specific data from machine setup
+ * @regs: SSP controller register's virtual address
+ * @pump_messages: Work struct for scheduling work to the workqueue
+ * @lock: spinlock to syncronise access to driver data
+ * @workqueue: a workqueue on which any spi_message request is queued
+ * @busy: workqueue is busy
+ * @run: workqueue is running
+ * @pump_transfers: Tasklet used in Interrupt Transfer mode
+ * @cur_msg: Pointer to current spi_message being processed
+ * @cur_transfer: Pointer to current spi_transfer
+ * @cur_chip: pointer to current clients chip(assigned from controller_state)
+ * @tx: current position in TX buffer to be read
+ * @tx_end: end position in TX buffer to be read
+ * @rx: current position in RX buffer to be written
+ * @rx_end: end position in RX buffer to be written
+ * @readingtype: the type of read currently going on
+ * @writingtype: the type or write currently going on
+ */
+struct pl022 {
+	struct amba_device		*adev;
+	struct vendor_data		*vendor;
+	resource_size_t			phybase;
+	void __iomem			*virtbase;
+	struct clk			*clk;
+	struct spi_master		*master;
+	struct pl022_ssp_controller	*master_info;
+	/* Driver message queue */
+	struct workqueue_struct		*workqueue;
+	struct work_struct		pump_messages;
+	spinlock_t			queue_lock;
+	struct list_head		queue;
+	int				busy;
+	int				run;
+	/* Message transfer pump */
+	struct tasklet_struct		pump_transfers;
+	struct spi_message		*cur_msg;
+	struct spi_transfer		*cur_transfer;
+	struct chip_data		*cur_chip;
+	void				*tx;
+	void				*tx_end;
+	void				*rx;
+	void				*rx_end;
+	enum ssp_reading		read;
+	enum ssp_writing		write;
+};
+
+/**
+ * struct chip_data - To maintain runtime state of SSP for each client chip
+ * @cr0: Value of control register CR0 of SSP
+ * @cr1: Value of control register CR1 of SSP
+ * @dmacr: Value of DMA control Register of SSP
+ * @cpsr: Value of Clock prescale register
+ * @n_bytes: how many bytes(power of 2) reqd for a given data width of client
+ * @enable_dma: Whether to enable DMA or not
+ * @write: function ptr to be used to write when doing xfer for this chip
+ * @read: function ptr to be used to read when doing xfer for this chip
+ * @cs_control: chip select callback provided by chip
+ * @xfer_type: polling/interrupt/DMA
+ *
+ * Runtime state of the SSP controller, maintained per chip,
+ * This would be set according to the current message that would be served
+ */
+struct chip_data {
+	u16 cr0;
+	u16 cr1;
+	u16 dmacr;
+	u16 cpsr;
+	u8 n_bytes;
+	u8 enable_dma:1;
+	enum ssp_reading read;
+	enum ssp_writing write;
+	void (*cs_control) (u32 command);
+	int xfer_type;
+};
+
+/**
+ * null_cs_control - Dummy chip select function
+ * @command: select/delect the chip
+ *
+ * If no chip select function is provided by client this is used as dummy
+ * chip select
+ */
+static void null_cs_control(u32 command)
+{
+	pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
+}
+
+/**
+ * giveback - current spi_message is over, schedule next message and call
+ * callback of this message. Assumes that caller already
+ * set message->status; dma and pio irqs are blocked
+ * @pl022: SSP driver private data structure
+ */
+static void giveback(struct pl022 *pl022)
+{
+	struct spi_transfer *last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+	void (*curr_cs_control) (u32 command);
+
+	/*
+	 * This local reference to the chip select function
+	 * is needed because we set curr_chip to NULL
+	 * as a step toward termininating the message.
+	 */
+	curr_cs_control = pl022->cur_chip->cs_control;
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	msg = pl022->cur_msg;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	/* Delay if requested before any change in chip select */
+	if (last_transfer->delay_usecs)
+		/*
+		 * FIXME: This runs in interrupt context.
+		 * Is this really smart?
+		 */
+		udelay(last_transfer->delay_usecs);
+
+	/*
+	 * Drop chip select UNLESS cs_change is true or we are returning
+	 * a message with an error, or next message is for another chip
+	 */
+	if (!last_transfer->cs_change)
+		curr_cs_control(SSP_CHIP_DESELECT);
+	else {
+		struct spi_message *next_msg;
+
+		/* Holding of cs was hinted, but we need to make sure
+		 * the next message is for the same chip.  Don't waste
+		 * time with the following tests unless this was hinted.
+		 *
+		 * We cannot postpone this until pump_messages, because
+		 * after calling msg->complete (below) the driver that
+		 * sent the current message could be unloaded, which
+		 * could invalidate the cs_control() callback...
+		 */
+
+		/* get a pointer to the next message, if any */
+		spin_lock_irqsave(&pl022->queue_lock, flags);
+		if (list_empty(&pl022->queue))
+			next_msg = NULL;
+		else
+			next_msg = list_entry(pl022->queue.next,
+					struct spi_message, queue);
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+		/* see if the next and current messages point
+		 * to the same chip
+		 */
+		if (next_msg && next_msg->spi != msg->spi)
+			next_msg = NULL;
+		if (!next_msg || msg->state == STATE_ERROR)
+			curr_cs_control(SSP_CHIP_DESELECT);
+	}
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+	/* This message is completed, so let's turn off the clock! */
+	clk_disable(pl022->clk);
+}
+
+/**
+ * flush - flush the FIFO to reach a clean state
+ * @pl022: SSP driver private data structure
+ */
+static int flush(struct pl022 *pl022)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	dev_dbg(&pl022->adev->dev, "flush\n");
+	do {
+		while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+			readw(SSP_DR(pl022->virtbase));
+	} while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+	return limit;
+}
+
+/**
+ * restore_state - Load configuration of current chip
+ * @pl022: SSP driver private data structure
+ */
+static void restore_state(struct pl022 *pl022)
+{
+	struct chip_data *chip = pl022->cur_chip;
+
+	writew(chip->cr0, SSP_CR0(pl022->virtbase));
+	writew(chip->cr1, SSP_CR1(pl022->virtbase));
+	writew(chip->dmacr, SSP_DMACR(pl022->virtbase));
+	writew(chip->cpsr, SSP_CPSR(pl022->virtbase));
+	writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * load_ssp_default_config - Load default configuration for SSP
+ * @pl022: SSP driver private data structure
+ */
+
+/*
+ * Default SSP Register Values
+ */
+#define DEFAULT_SSP_REG_CR0 ( \
+	GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0)	| \
+	GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
+	GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
+	GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+	GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
+	GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16)	| \
+	GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
+)
+
+#define DEFAULT_SSP_REG_CR1 ( \
+	GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \
+	GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \
+	GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \
+	GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \
+	GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN, 4) | \
+	GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN, 5) | \
+	GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT, 6) |\
+	GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL, 7) | \
+	GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL, 10) \
+)
+
+#define DEFAULT_SSP_REG_CPSR ( \
+	GEN_MASK_BITS(NMDK_SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \
+)
+
+#define DEFAULT_SSP_REG_DMACR (\
+	GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \
+	GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \
+)
+
+
+static void load_ssp_default_config(struct pl022 *pl022)
+{
+	writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase));
+	writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase));
+	writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * This will write to TX and read from RX according to the parameters
+ * set in pl022.
+ */
+static void readwriter(struct pl022 *pl022)
+{
+
+	/*
+	 * The FIFO depth is different inbetween primecell variants.
+	 * I believe filling in too much in the FIFO might cause
+	 * errons in 8bit wide transfers on ARM variants (just 8 words
+	 * FIFO, means only 8x8 = 64 bits in FIFO) at least.
+	 *
+	 * FIXME: currently we have no logic to account for this.
+	 * perhaps there is even something broken in HW regarding
+	 * 8bit transfers (it doesn't fail on 16bit) so this needs
+	 * more investigation...
+	 */
+	dev_dbg(&pl022->adev->dev,
+		"%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
+		__func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end);
+
+	/* Read as much as you can */
+	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+	       && (pl022->rx < pl022->rx_end)) {
+		switch (pl022->read) {
+		case READING_NULL:
+			readw(SSP_DR(pl022->virtbase));
+			break;
+		case READING_U8:
+			*(u8 *) (pl022->rx) =
+				readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+			break;
+		case READING_U16:
+			*(u16 *) (pl022->rx) =
+				(u16) readw(SSP_DR(pl022->virtbase));
+			break;
+		case READING_U32:
+			*(u32 *) (pl022->rx) =
+				readl(SSP_DR(pl022->virtbase));
+			break;
+		}
+		pl022->rx += (pl022->cur_chip->n_bytes);
+	}
+	/*
+	 * Write as much as you can, while keeping an eye on the RX FIFO!
+	 */
+	while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+	       && (pl022->tx < pl022->tx_end)) {
+		switch (pl022->write) {
+		case WRITING_NULL:
+			writew(0x0, SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U8:
+			writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U16:
+			writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase));
+			break;
+		case WRITING_U32:
+			writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase));
+			break;
+		}
+		pl022->tx += (pl022->cur_chip->n_bytes);
+		/*
+		 * This inner reader takes care of things appearing in the RX
+		 * FIFO as we're transmitting. This will happen a lot since the
+		 * clock starts running when you put things into the TX FIFO,
+		 * and then things are continously clocked into the RX FIFO.
+		 */
+		while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+		       && (pl022->rx < pl022->rx_end)) {
+			switch (pl022->read) {
+			case READING_NULL:
+				readw(SSP_DR(pl022->virtbase));
+				break;
+			case READING_U8:
+				*(u8 *) (pl022->rx) =
+					readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+				break;
+			case READING_U16:
+				*(u16 *) (pl022->rx) =
+					(u16) readw(SSP_DR(pl022->virtbase));
+				break;
+			case READING_U32:
+				*(u32 *) (pl022->rx) =
+					readl(SSP_DR(pl022->virtbase));
+				break;
+			}
+			pl022->rx += (pl022->cur_chip->n_bytes);
+		}
+	}
+	/*
+	 * When we exit here the TX FIFO should be full and the RX FIFO
+	 * should be empty
+	 */
+}
+
+
+/**
+ * next_transfer - Move to the Next transfer in the current spi message
+ * @pl022: SSP driver private data structure
+ *
+ * This function moves though the linked list of spi transfers in the
+ * current spi message and returns with the state of current spi
+ * message i.e whether its last transfer is done(STATE_DONE) or
+ * Next transfer is ready(STATE_RUNNING)
+ */
+static void *next_transfer(struct pl022 *pl022)
+{
+	struct spi_message *msg = pl022->cur_msg;
+	struct spi_transfer *trans = pl022->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		pl022->cur_transfer =
+		    list_entry(trans->transfer_list.next,
+			       struct spi_transfer, transfer_list);
+		return STATE_RUNNING;
+	}
+	return STATE_DONE;
+}
+/**
+ * pl022_interrupt_handler - Interrupt handler for SSP controller
+ *
+ * This function handles interrupts generated for an interrupt based transfer.
+ * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the
+ * current message's state as STATE_ERROR and schedule the tasklet
+ * pump_transfers which will do the postprocessing of the current message by
+ * calling giveback(). Otherwise it reads data from RX FIFO till there is no
+ * more data, and writes data in TX FIFO till it is not full. If we complete
+ * the transfer we move to the next transfer and schedule the tasklet.
+ */
+static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
+{
+	struct pl022 *pl022 = dev_id;
+	struct spi_message *msg = pl022->cur_msg;
+	u16 irq_status = 0;
+	u16 flag = 0;
+
+	if (unlikely(!msg)) {
+		dev_err(&pl022->adev->dev,
+			"bad message state in interrupt handler");
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	/* Read the Interrupt Status Register */
+	irq_status = readw(SSP_MIS(pl022->virtbase));
+
+	if (unlikely(!irq_status))
+		return IRQ_NONE;
+
+	/* This handles the error code interrupts */
+	if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) {
+		/*
+		 * Overrun interrupt - bail out since our Data has been
+		 * corrupted
+		 */
+		dev_err(&pl022->adev->dev,
+			"FIFO overrun\n");
+		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
+			dev_err(&pl022->adev->dev,
+				"RXFIFO is full\n");
+		if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+			dev_err(&pl022->adev->dev,
+				"TXFIFO is full\n");
+
+		/*
+		 * Disable and clear interrupts, disable SSP,
+		 * mark message with bad status so it can be
+		 * retried.
+		 */
+		writew(DISABLE_ALL_INTERRUPTS,
+		       SSP_IMSC(pl022->virtbase));
+		writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+		writew((readw(SSP_CR1(pl022->virtbase)) &
+			(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+		msg->state = STATE_ERROR;
+
+		/* Schedule message queue handler */
+		tasklet_schedule(&pl022->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	readwriter(pl022);
+
+	if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
+		flag = 1;
+		/* Disable Transmit interrupt */
+		writew(readw(SSP_IMSC(pl022->virtbase)) &
+		       (~SSP_IMSC_MASK_TXIM),
+		       SSP_IMSC(pl022->virtbase));
+	}
+
+	/*
+	 * Since all transactions must write as much as shall be read,
+	 * we can conclude the entire transaction once RX is complete.
+	 * At this point, all TX will always be finished.
+	 */
+	if (pl022->rx >= pl022->rx_end) {
+		writew(DISABLE_ALL_INTERRUPTS,
+		       SSP_IMSC(pl022->virtbase));
+		writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+		if (unlikely(pl022->rx > pl022->rx_end)) {
+			dev_warn(&pl022->adev->dev, "read %u surplus "
+				 "bytes (did you request an odd "
+				 "number of bytes on a 16bit bus?)\n",
+				 (u32) (pl022->rx - pl022->rx_end));
+		}
+		/* Update total bytes transfered */
+		msg->actual_length += pl022->cur_transfer->len;
+		if (pl022->cur_transfer->cs_change)
+			pl022->cur_chip->
+				cs_control(SSP_CHIP_DESELECT);
+		/* Move to next transfer */
+		msg->state = next_transfer(pl022);
+		tasklet_schedule(&pl022->pump_transfers);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * This sets up the pointers to memory for the next message to
+ * send out on the SPI bus.
+ */
+static int set_up_next_transfer(struct pl022 *pl022,
+				struct spi_transfer *transfer)
+{
+	int residue;
+
+	/* Sanity check the message for this bus width */
+	residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes;
+	if (unlikely(residue != 0)) {
+		dev_err(&pl022->adev->dev,
+			"message of %u bytes to transmit but the current "
+			"chip bus has a data width of %u bytes!\n",
+			pl022->cur_transfer->len,
+			pl022->cur_chip->n_bytes);
+		dev_err(&pl022->adev->dev, "skipping this message\n");
+		return -EIO;
+	}
+	pl022->tx = (void *)transfer->tx_buf;
+	pl022->tx_end = pl022->tx + pl022->cur_transfer->len;
+	pl022->rx = (void *)transfer->rx_buf;
+	pl022->rx_end = pl022->rx + pl022->cur_transfer->len;
+	pl022->write =
+	    pl022->tx ? pl022->cur_chip->write : WRITING_NULL;
+	pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL;
+	return 0;
+}
+
+/**
+ * pump_transfers - Tasklet function which schedules next interrupt transfer
+ * when running in interrupt transfer mode.
+ * @data: SSP driver private data structure
+ *
+ */
+static void pump_transfers(unsigned long data)
+{
+	struct pl022 *pl022 = (struct pl022 *) data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+
+	/* Get current state information */
+	message = pl022->cur_msg;
+	transfer = pl022->cur_transfer;
+
+	/* Handle for abort */
+	if (message->state == STATE_ERROR) {
+		message->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == STATE_DONE) {
+		message->status = 0;
+		giveback(pl022);
+		return;
+	}
+
+	/* Delay if requested at end of transfer before CS change */
+	if (message->state == STATE_RUNNING) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			/*
+			 * FIXME: This runs in interrupt context.
+			 * Is this really smart?
+			 */
+			udelay(previous->delay_usecs);
+
+		/* Drop chip select only if cs_change is requested */
+		if (previous->cs_change)
+			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	} else {
+		/* STATE_START */
+		message->state = STATE_RUNNING;
+	}
+
+	if (set_up_next_transfer(pl022, transfer)) {
+		message->state = STATE_ERROR;
+		message->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Flush the FIFOs and let's go! */
+	flush(pl022);
+	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+/**
+ * NOT IMPLEMENTED
+ * configure_dma - It configures the DMA pipes for DMA transfers
+ * @data: SSP driver's private data structure
+ *
+ */
+static int configure_dma(void *data)
+{
+	struct pl022 *pl022 = data;
+	dev_dbg(&pl022->adev->dev, "configure DMA\n");
+	return -ENOTSUPP;
+}
+
+/**
+ * do_dma_transfer - It handles transfers of the current message
+ * if it is DMA xfer.
+ * NOT FULLY IMPLEMENTED
+ * @data: SSP driver's private data structure
+ */
+static void do_dma_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+
+	if (configure_dma(data)) {
+		dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n");
+		goto err_config_dma;
+	}
+
+	/* TODO: Implememt DMA setup of pipes here */
+
+	/* Enable target chip, set up transfer */
+	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+		/* Error path */
+		pl022->cur_msg->state = STATE_ERROR;
+		pl022->cur_msg->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Enable SSP */
+	writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+	       SSP_CR1(pl022->virtbase));
+
+	/* TODO: Enable the DMA transfer here */
+	return;
+
+ err_config_dma:
+	pl022->cur_msg->state = STATE_ERROR;
+	pl022->cur_msg->status = -EIO;
+	giveback(pl022);
+	return;
+}
+
+static void do_interrupt_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+
+	/* Enable target chip */
+	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+		/* Error path */
+		pl022->cur_msg->state = STATE_ERROR;
+		pl022->cur_msg->status = -EIO;
+		giveback(pl022);
+		return;
+	}
+	/* Enable SSP, turn on interrupts */
+	writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+	       SSP_CR1(pl022->virtbase));
+	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+static void do_polling_transfer(void *data)
+{
+	struct pl022 *pl022 = data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip;
+
+	chip = pl022->cur_chip;
+	message = pl022->cur_msg;
+
+	while (message->state != STATE_DONE) {
+		/* Handle for abort */
+		if (message->state == STATE_ERROR)
+			break;
+		transfer = pl022->cur_transfer;
+
+		/* Delay if requested at end of transfer */
+		if (message->state == STATE_RUNNING) {
+			previous =
+			    list_entry(transfer->transfer_list.prev,
+				       struct spi_transfer, transfer_list);
+			if (previous->delay_usecs)
+				udelay(previous->delay_usecs);
+			if (previous->cs_change)
+				pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+		} else {
+			/* STATE_START */
+			message->state = STATE_RUNNING;
+			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+		}
+
+		/* Configuration Changing Per Transfer */
+		if (set_up_next_transfer(pl022, transfer)) {
+			/* Error path */
+			message->state = STATE_ERROR;
+			break;
+		}
+		/* Flush FIFOs and enable SSP */
+		flush(pl022);
+		writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+		       SSP_CR1(pl022->virtbase));
+
+		dev_dbg(&pl022->adev->dev, "POLLING TRANSFER ONGOING ... \n");
+		/* FIXME: insert a timeout so we don't hang here indefinately */
+		while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
+			readwriter(pl022);
+
+		/* Update total byte transfered */
+		message->actual_length += pl022->cur_transfer->len;
+		if (pl022->cur_transfer->cs_change)
+			pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+		/* Move to next transfer */
+		message->state = next_transfer(pl022);
+	}
+
+	/* Handle end of message */
+	if (message->state == STATE_DONE)
+		message->status = 0;
+	else
+		message->status = -EIO;
+
+	giveback(pl022);
+	return;
+}
+
+/**
+ * pump_messages - Workqueue function which processes spi message queue
+ * @data: pointer to private data of SSP driver
+ *
+ * This function checks if there is any spi message in the queue that
+ * needs processing and delegate control to appropriate function
+ * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer()
+ * based on the kind of the transfer
+ *
+ */
+static void pump_messages(struct work_struct *work)
+{
+	struct pl022 *pl022 =
+		container_of(work, struct pl022, pump_messages);
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
+		pl022->busy = 0;
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return;
+	}
+	/* Make sure we are not already running a message */
+	if (pl022->cur_msg) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return;
+	}
+	/* Extract head of queue */
+	pl022->cur_msg =
+	    list_entry(pl022->queue.next, struct spi_message, queue);
+
+	list_del_init(&pl022->cur_msg->queue);
+	pl022->busy = 1;
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	/* Initial message state */
+	pl022->cur_msg->state = STATE_START;
+	pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
+					    struct spi_transfer,
+					    transfer_list);
+
+	/* Setup the SPI using the per chip configuration */
+	pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
+	/*
+	 * We enable the clock here, then the clock will be disabled when
+	 * giveback() is called in each method (poll/interrupt/DMA)
+	 */
+	clk_enable(pl022->clk);
+	restore_state(pl022);
+	flush(pl022);
+
+	if (pl022->cur_chip->xfer_type == POLLING_TRANSFER)
+		do_polling_transfer(pl022);
+	else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER)
+		do_interrupt_transfer(pl022);
+	else
+		do_dma_transfer(pl022);
+}
+
+
+static int __init init_queue(struct pl022 *pl022)
+{
+	INIT_LIST_HEAD(&pl022->queue);
+	spin_lock_init(&pl022->queue_lock);
+
+	pl022->run = QUEUE_STOPPED;
+	pl022->busy = 0;
+
+	tasklet_init(&pl022->pump_transfers,
+			pump_transfers,	(unsigned long)pl022);
+
+	INIT_WORK(&pl022->pump_messages, pump_messages);
+	pl022->workqueue = create_singlethread_workqueue(
+					dev_name(pl022->master->dev.parent));
+	if (pl022->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+
+static int start_queue(struct pl022 *pl022)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	if (pl022->run == QUEUE_RUNNING || pl022->busy) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return -EBUSY;
+	}
+
+	pl022->run = QUEUE_RUNNING;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+
+	return 0;
+}
+
+
+static int stop_queue(struct pl022 *pl022)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the pl022->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	pl022->run = QUEUE_STOPPED;
+	while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&pl022->queue_lock, flags);
+	}
+
+	if (!list_empty(&pl022->queue) || pl022->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct pl022 *pl022)
+{
+	int status;
+
+	status = stop_queue(pl022);
+	/* we are unloading the module or failing to load (only two calls
+	 * to this routine), and neither call can handle a return value.
+	 * However, destroy_workqueue calls flush_workqueue, and that will
+	 * block until all work is done.  If the reason that stop_queue
+	 * timed out is that the work will never finish, then it does no
+	 * good to call destroy_workqueue, so return anyway. */
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(pl022->workqueue);
+
+	return 0;
+}
+
+static int verify_controller_parameters(struct pl022 *pl022,
+					struct pl022_config_chip *chip_info)
+{
+	if ((chip_info->lbm != LOOPBACK_ENABLED)
+	    && (chip_info->lbm != LOOPBACK_DISABLED)) {
+		dev_err(chip_info->dev,
+			"loopback Mode is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI)
+	    || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) {
+		dev_err(chip_info->dev,
+			"interface is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) &&
+	    (!pl022->vendor->unidir)) {
+		dev_err(chip_info->dev,
+			"unidirectional mode not supported in this "
+			"hardware version\n");
+		return -EINVAL;
+	}
+	if ((chip_info->hierarchy != SSP_MASTER)
+	    && (chip_info->hierarchy != SSP_SLAVE)) {
+		dev_err(chip_info->dev,
+			"hierarchy is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN)
+	    || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) {
+		dev_err(chip_info->dev,
+			"cpsdvsr is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->endian_rx != SSP_RX_MSB)
+	    && (chip_info->endian_rx != SSP_RX_LSB)) {
+		dev_err(chip_info->dev,
+			"RX FIFO endianess is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->endian_tx != SSP_TX_MSB)
+	    && (chip_info->endian_tx != SSP_TX_LSB)) {
+		dev_err(chip_info->dev,
+			"TX FIFO endianess is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->data_size < SSP_DATA_BITS_4)
+	    || (chip_info->data_size > SSP_DATA_BITS_32)) {
+		dev_err(chip_info->dev,
+			"DATA Size is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->com_mode != INTERRUPT_TRANSFER)
+	    && (chip_info->com_mode != DMA_TRANSFER)
+	    && (chip_info->com_mode != POLLING_TRANSFER)) {
+		dev_err(chip_info->dev,
+			"Communication mode is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM)
+	    || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) {
+		dev_err(chip_info->dev,
+			"RX FIFO Trigger Level is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC)
+	    || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) {
+		dev_err(chip_info->dev,
+			"TX FIFO Trigger Level is configured incorrectly\n");
+		return -EINVAL;
+	}
+	if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
+		if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
+		    && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+			dev_err(chip_info->dev,
+				"Clock Phase is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW)
+		    && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) {
+			dev_err(chip_info->dev,
+				"Clock Polarity is configured incorrectly\n");
+			return -EINVAL;
+		}
+	}
+	if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) {
+		if ((chip_info->ctrl_len < SSP_BITS_4)
+		    || (chip_info->ctrl_len > SSP_BITS_32)) {
+			dev_err(chip_info->dev,
+				"CTRL LEN is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO)
+		    && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) {
+			dev_err(chip_info->dev,
+				"Wait State is configured incorrectly\n");
+			return -EINVAL;
+		}
+		if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX)
+		    && (chip_info->duplex !=
+			SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) {
+			dev_err(chip_info->dev,
+				"DUPLEX is configured incorrectly\n");
+			return -EINVAL;
+		}
+	}
+	if (chip_info->cs_control == NULL) {
+		dev_warn(chip_info->dev,
+			"Chip Select Function is NULL for this chip\n");
+		chip_info->cs_control = null_cs_control;
+	}
+	return 0;
+}
+
+/**
+ * pl022_transfer - transfer function registered to SPI master framework
+ * @spi: spi device which is requesting transfer
+ * @msg: spi message which is to handled is queued to driver queue
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will queue the spi_message in the queue of driver if
+ * the queue is not stopped and return.
+ */
+static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+
+	if (pl022->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&pl022->queue_lock, flags);
+		return -ESHUTDOWN;
+	}
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = STATE_START;
+
+	list_add_tail(&msg->queue, &pl022->queue);
+	if (pl022->run == QUEUE_RUNNING && !pl022->busy)
+		queue_work(pl022->workqueue, &pl022->pump_messages);
+
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+	return 0;
+}
+
+static int calculate_effective_freq(struct pl022 *pl022,
+				    int freq,
+				    struct ssp_clock_params *clk_freq)
+{
+	/* Lets calculate the frequency parameters */
+	u16 cpsdvsr = 2;
+	u16 scr = 0;
+	bool freq_found = false;
+	u32 rate;
+	u32 max_tclk;
+	u32 min_tclk;
+
+	rate = clk_get_rate(pl022->clk);
+	/* cpsdvscr = 2 & scr 0 */
+	max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN)));
+	/* cpsdvsr = 254 & scr = 255 */
+	min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX)));
+
+	if ((freq <= max_tclk) && (freq >= min_tclk)) {
+		while (cpsdvsr <= CPSDVR_MAX && !freq_found) {
+			while (scr <= SCR_MAX && !freq_found) {
+				if ((rate /
+				     (cpsdvsr * (1 + scr))) > freq)
+					scr += 1;
+				else {
+					/*
+					 * This bool is made true when
+					 * effective frequency >=
+					 * target frequency is found
+					 */
+					freq_found = true;
+					if ((rate /
+					     (cpsdvsr * (1 + scr))) != freq) {
+						if (scr == SCR_MIN) {
+							cpsdvsr -= 2;
+							scr = SCR_MAX;
+						} else
+							scr -= 1;
+					}
+				}
+			}
+			if (!freq_found) {
+				cpsdvsr += 2;
+				scr = SCR_MIN;
+			}
+		}
+		if (cpsdvsr != 0) {
+			dev_dbg(&pl022->adev->dev,
+				"SSP Effective Frequency is %u\n",
+				(rate / (cpsdvsr * (1 + scr))));
+			clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF);
+			clk_freq->scr = (u8) (scr & 0xFF);
+			dev_dbg(&pl022->adev->dev,
+				"SSP cpsdvsr = %d, scr = %d\n",
+				clk_freq->cpsdvsr, clk_freq->scr);
+		}
+	} else {
+		dev_err(&pl022->adev->dev,
+			"controller data is incorrect: out of range frequency");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * NOT IMPLEMENTED
+ * process_dma_info - Processes the DMA info provided by client drivers
+ * @chip_info: chip info provided by client device
+ * @chip: Runtime state maintained by the SSP controller for each spi device
+ *
+ * This function processes and stores DMA config provided by client driver
+ * into the runtime state maintained by the SSP controller driver
+ */
+static int process_dma_info(struct pl022_config_chip *chip_info,
+			    struct chip_data *chip)
+{
+	dev_err(chip_info->dev,
+		"cannot process DMA info, DMA not implemented!\n");
+	return -ENOTSUPP;
+}
+
+/**
+ * pl022_setup - setup function registered to SPI master framework
+ * @spi: spi device which is requesting setup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. If it is the first time when setup is called by this device,
+ * this function will initialize the runtime state for this chip and save
+ * the same in the device structure. Else it will update the runtime info
+ * with the updated chip info. Nothing is really being written to the
+ * controller hardware here, that is not done until the actual transfer
+ * commence.
+ */
+
+/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */
+#define MODEBITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+			| SPI_LSB_FIRST | SPI_LOOP)
+
+static int pl022_setup(struct spi_device *spi)
+{
+	struct pl022_config_chip *chip_info;
+	struct chip_data *chip;
+	int status = 0;
+	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+
+	if (spi->mode & ~MODEBITS) {
+		dev_dbg(&spi->dev, "unsupported mode bits %x\n",
+			spi->mode & ~MODEBITS);
+		return -EINVAL;
+	}
+
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
+	/* Get controller_state if one is supplied */
+	chip = spi_get_ctldata(spi);
+
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip) {
+			dev_err(&spi->dev,
+				"cannot allocate controller state\n");
+			return -ENOMEM;
+		}
+		dev_dbg(&spi->dev,
+			"allocated memory for controller's runtime state\n");
+	}
+
+	/* Get controller data if one is supplied */
+	chip_info = spi->controller_data;
+
+	if (chip_info == NULL) {
+		/* spi_board_info.controller_data not is supplied */
+		dev_dbg(&spi->dev,
+			"using default controller_data settings\n");
+
+		chip_info =
+			kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL);
+
+		if (!chip_info) {
+			dev_err(&spi->dev,
+				"cannot allocate controller data\n");
+			status = -ENOMEM;
+			goto err_first_setup;
+		}
+
+		dev_dbg(&spi->dev, "allocated memory for controller data\n");
+
+		/* Pointer back to the SPI device */
+		chip_info->dev = &spi->dev;
+		/*
+		 * Set controller data default values:
+		 * Polling is supported by default
+		 */
+		chip_info->lbm = LOOPBACK_DISABLED;
+		chip_info->com_mode = POLLING_TRANSFER;
+		chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI;
+		chip_info->hierarchy = SSP_SLAVE;
+		chip_info->slave_tx_disable = DO_NOT_DRIVE_TX;
+		chip_info->endian_tx = SSP_TX_LSB;
+		chip_info->endian_rx = SSP_RX_LSB;
+		chip_info->data_size = SSP_DATA_BITS_12;
+		chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
+		chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
+		chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+		chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
+		chip_info->ctrl_len = SSP_BITS_8;
+		chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
+		chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX;
+		chip_info->cs_control = null_cs_control;
+	} else {
+		dev_dbg(&spi->dev,
+			"using user supplied controller_data settings\n");
+	}
+
+	/*
+	 * We can override with custom divisors, else we use the board
+	 * frequency setting
+	 */
+	if ((0 == chip_info->clk_freq.cpsdvsr)
+	    && (0 == chip_info->clk_freq.scr)) {
+		status = calculate_effective_freq(pl022,
+						  spi->max_speed_hz,
+						  &chip_info->clk_freq);
+		if (status < 0)
+			goto err_config_params;
+	} else {
+		if ((chip_info->clk_freq.cpsdvsr % 2) != 0)
+			chip_info->clk_freq.cpsdvsr =
+				chip_info->clk_freq.cpsdvsr - 1;
+	}
+	status = verify_controller_parameters(pl022, chip_info);
+	if (status) {
+		dev_err(&spi->dev, "controller data is incorrect");
+		goto err_config_params;
+	}
+	/* Now set controller state based on controller data */
+	chip->xfer_type = chip_info->com_mode;
+	chip->cs_control = chip_info->cs_control;
+
+	if (chip_info->data_size <= 8) {
+		dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n");
+		chip->n_bytes = 1;
+		chip->read = READING_U8;
+		chip->write = WRITING_U8;
+	} else if (chip_info->data_size <= 16) {
+		dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n");
+		chip->n_bytes = 2;
+		chip->read = READING_U16;
+		chip->write = WRITING_U16;
+	} else {
+		if (pl022->vendor->max_bpw >= 32) {
+			dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
+			chip->n_bytes = 4;
+			chip->read = READING_U32;
+			chip->write = WRITING_U32;
+		} else {
+			dev_err(&spi->dev,
+				"illegal data size for this controller!\n");
+			dev_err(&spi->dev,
+				"a standard pl022 can only handle "
+				"1 <= n <= 16 bit words\n");
+			goto err_config_params;
+		}
+	}
+
+	/* Now Initialize all register settings required for this chip */
+	chip->cr0 = 0;
+	chip->cr1 = 0;
+	chip->dmacr = 0;
+	chip->cpsr = 0;
+	if ((chip_info->com_mode == DMA_TRANSFER)
+	    && ((pl022->master_info)->enable_dma)) {
+		chip->enable_dma = 1;
+		dev_dbg(&spi->dev, "DMA mode set in controller state\n");
+		status = process_dma_info(chip_info, chip);
+		if (status < 0)
+			goto err_config_params;
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+			       SSP_DMACR_MASK_RXDMAE, 0);
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+			       SSP_DMACR_MASK_TXDMAE, 1);
+	} else {
+		chip->enable_dma = 0;
+		dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n");
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+			       SSP_DMACR_MASK_RXDMAE, 0);
+		SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+			       SSP_DMACR_MASK_TXDMAE, 1);
+	}
+
+	chip->cpsr = chip_info->clk_freq.cpsdvsr;
+
+	SSP_WRITE_BITS(chip->cr0, chip_info->data_size, SSP_CR0_MASK_DSS, 0);
+	SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP, 5);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7);
+	SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8);
+	SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS, 16);
+	SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 21);
+	SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0);
+	SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1);
+	SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2);
+	SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3);
+	SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, SSP_CR1_MASK_RENDN, 4);
+	SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, SSP_CR1_MASK_TENDN, 5);
+	SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT, 6);
+	SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL, 7);
+	SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL, 10);
+
+	/* Save controller_state */
+	spi_set_ctldata(spi, chip);
+	return status;
+ err_config_params:
+ err_first_setup:
+	kfree(chip);
+	return status;
+}
+
+/**
+ * pl022_cleanup - cleanup function registered to SPI master framework
+ * @spi: spi device which is requesting cleanup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will free the runtime state of chip.
+ */
+static void pl022_cleanup(struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata(spi);
+
+	spi_set_ctldata(spi, NULL);
+	kfree(chip);
+}
+
+
+static int __init
+pl022_probe(struct amba_device *adev, struct amba_id *id)
+{
+	struct device *dev = &adev->dev;
+	struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
+	struct spi_master *master;
+	struct pl022 *pl022 = NULL;	/*Data for this driver */
+	int status = 0;
+
+	dev_info(&adev->dev,
+		 "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
+	if (platform_info == NULL) {
+		dev_err(&adev->dev, "probe - no platform data supplied\n");
+		status = -ENODEV;
+		goto err_no_pdata;
+	}
+
+	/* Allocate master with space for data */
+	master = spi_alloc_master(dev, sizeof(struct pl022));
+	if (master == NULL) {
+		dev_err(&adev->dev, "probe - cannot alloc SPI master\n");
+		status = -ENOMEM;
+		goto err_no_master;
+	}
+
+	pl022 = spi_master_get_devdata(master);
+	pl022->master = master;
+	pl022->master_info = platform_info;
+	pl022->adev = adev;
+	pl022->vendor = id->data;
+
+	/*
+	 * Bus Number Which has been Assigned to this SSP controller
+	 * on this board
+	 */
+	master->bus_num = platform_info->bus_id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = pl022_cleanup;
+	master->setup = pl022_setup;
+	master->transfer = pl022_transfer;
+
+	dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num);
+
+	status = amba_request_regions(adev, NULL);
+	if (status)
+		goto err_no_ioregion;
+
+	pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
+	if (pl022->virtbase == NULL) {
+		status = -ENOMEM;
+		goto err_no_ioremap;
+	}
+	printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
+	       adev->res.start, pl022->virtbase);
+
+	pl022->clk = clk_get(&adev->dev, NULL);
+	if (IS_ERR(pl022->clk)) {
+		status = PTR_ERR(pl022->clk);
+		dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n");
+		goto err_no_clk;
+	}
+
+	/* Disable SSP */
+	clk_enable(pl022->clk);
+	writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
+	       SSP_CR1(pl022->virtbase));
+	load_ssp_default_config(pl022);
+	clk_disable(pl022->clk);
+
+	status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
+			     pl022);
+	if (status < 0) {
+		dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status);
+		goto err_no_irq;
+	}
+	/* Initialize and start queue */
+	status = init_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev, "probe - problem initializing queue\n");
+		goto err_init_queue;
+	}
+	status = start_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev, "probe - problem starting queue\n");
+		goto err_start_queue;
+	}
+	/* Register with the SPI framework */
+	amba_set_drvdata(adev, pl022);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&adev->dev,
+			"probe - problem registering spi master\n");
+		goto err_spi_register;
+	}
+	dev_dbg(dev, "probe succeded\n");
+	return 0;
+
+ err_spi_register:
+ err_start_queue:
+ err_init_queue:
+	destroy_queue(pl022);
+	free_irq(adev->irq[0], pl022);
+ err_no_irq:
+	clk_put(pl022->clk);
+ err_no_clk:
+	iounmap(pl022->virtbase);
+ err_no_ioremap:
+	amba_release_regions(adev);
+ err_no_ioregion:
+	spi_master_put(master);
+ err_no_master:
+ err_no_pdata:
+	return status;
+}
+
+static int __exit
+pl022_remove(struct amba_device *adev)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+	if (!pl022)
+		return 0;
+
+	/* Remove the queue */
+	status = destroy_queue(pl022);
+	if (status != 0) {
+		dev_err(&adev->dev,
+			"queue remove failed (%d)\n", status);
+		return status;
+	}
+	load_ssp_default_config(pl022);
+	free_irq(adev->irq[0], pl022);
+	clk_disable(pl022->clk);
+	clk_put(pl022->clk);
+	iounmap(pl022->virtbase);
+	amba_release_regions(adev);
+	tasklet_disable(&pl022->pump_transfers);
+	spi_unregister_master(pl022->master);
+	spi_master_put(pl022->master);
+	amba_set_drvdata(adev, NULL);
+	dev_dbg(&adev->dev, "remove succeded\n");
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pl022_suspend(struct amba_device *adev, pm_message_t state)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+
+	status = stop_queue(pl022);
+	if (status) {
+		dev_warn(&adev->dev, "suspend cannot stop queue\n");
+		return status;
+	}
+
+	clk_enable(pl022->clk);
+	load_ssp_default_config(pl022);
+	clk_disable(pl022->clk);
+	dev_dbg(&adev->dev, "suspended\n");
+	return 0;
+}
+
+static int pl022_resume(struct amba_device *adev)
+{
+	struct pl022 *pl022 = amba_get_drvdata(adev);
+	int status = 0;
+
+	/* Start the queue running */
+	status = start_queue(pl022);
+	if (status)
+		dev_err(&adev->dev, "problem starting queue (%d)\n", status);
+	else
+		dev_dbg(&adev->dev, "resumed\n");
+
+	return status;
+}
+#else
+#define pl022_suspend NULL
+#define pl022_resume NULL
+#endif	/* CONFIG_PM */
+
+static struct vendor_data vendor_arm = {
+	.fifodepth = 8,
+	.max_bpw = 16,
+	.unidir = false,
+};
+
+
+static struct vendor_data vendor_st = {
+	.fifodepth = 32,
+	.max_bpw = 32,
+	.unidir = false,
+};
+
+static struct amba_id pl022_ids[] = {
+	{
+		/*
+		 * ARM PL022 variant, this has a 16bit wide
+		 * and 8 locations deep TX/RX FIFO
+		 */
+		.id	= 0x00041022,
+		.mask	= 0x000fffff,
+		.data	= &vendor_arm,
+	},
+	{
+		/*
+		 * ST Micro derivative, this has 32bit wide
+		 * and 32 locations deep TX/RX FIFO
+		 */
+		.id	= 0x00108022,
+		.mask	= 0xffffffff,
+		.data	= &vendor_st,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver pl022_driver = {
+	.drv = {
+		.name	= "ssp-pl022",
+	},
+	.id_table	= pl022_ids,
+	.probe		= pl022_probe,
+	.remove		= __exit_p(pl022_remove),
+	.suspend        = pl022_suspend,
+	.resume         = pl022_resume,
+};
+
+
+static int __init pl022_init(void)
+{
+	return amba_driver_register(&pl022_driver);
+}
+
+module_init(pl022_init);
+
+static void __exit pl022_exit(void)
+{
+	amba_driver_unregister(&pl022_driver);
+}
+
+module_exit(pl022_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index f014cc21e81..011c5bddba6 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -803,7 +803,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 				drv_data->rx, drv_data->len_in_bytes);
 
 			/* invalidate caches, if needed */
-			if (bfin_addr_dcachable((unsigned long) drv_data->rx))
+			if (bfin_addr_dcacheable((unsigned long) drv_data->rx))
 				invalidate_dcache_range((unsigned long) drv_data->rx,
 							(unsigned long) (drv_data->rx +
 							drv_data->len_in_bytes));
@@ -816,7 +816,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 			dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
 
 			/* flush caches, if needed */
-			if (bfin_addr_dcachable((unsigned long) drv_data->tx))
+			if (bfin_addr_dcacheable((unsigned long) drv_data->tx))
 				flush_dcache_range((unsigned long) drv_data->tx,
 						(unsigned long) (drv_data->tx +
 						drv_data->len_in_bytes));
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index f4573a96af2..a32ccb44065 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -711,12 +711,12 @@ static int of_mpc83xx_spi_get_chipselects(struct device *dev)
 		return 0;
 	}
 
-	pinfo->gpios = kmalloc(ngpios * sizeof(pinfo->gpios), GFP_KERNEL);
+	pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL);
 	if (!pinfo->gpios)
 		return -ENOMEM;
-	memset(pinfo->gpios, -1, ngpios * sizeof(pinfo->gpios));
+	memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios));
 
-	pinfo->alow_flags = kzalloc(ngpios * sizeof(pinfo->alow_flags),
+	pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags),
 				    GFP_KERNEL);
 	if (!pinfo->alow_flags) {
 		ret = -ENOMEM;
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index f2447a5476b..bbf9371cd28 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -17,6 +17,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 0dcf9ca0b0a..d0fcf36c2ab 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -115,5 +115,7 @@ source "drivers/staging/line6/Kconfig"
 
 source "drivers/staging/serqt_usb/Kconfig"
 
+source "drivers/gpu/drm/radeon/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
diff --git a/drivers/staging/agnx/pci.c b/drivers/staging/agnx/pci.c
index 25c0ffd2faa..43b3fe35261 100644
--- a/drivers/staging/agnx/pci.c
+++ b/drivers/staging/agnx/pci.c
@@ -303,14 +303,18 @@ static int agnx_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
-static int agnx_config_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_vif *vif,
-				 struct ieee80211_if_conf *conf)
+static void agnx_bss_info_changed(struct ieee80211_hw *dev,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_bss_conf *conf,
+				  u32 changed)
 {
 	struct agnx_priv *priv = dev->priv;
 	void __iomem *ctl = priv->ctl;
 	AGNX_TRACE;
 
+	if (!(changed & BSS_CHANGED_BSSID))
+		return;
+
 	spin_lock(&priv->lock);
 
 	if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
@@ -323,8 +327,7 @@ static int agnx_config_interface(struct ieee80211_hw *dev,
 		agnx_write32(ctl, AGNX_BM_MTSM, 0xff & ~0x1);
 	}
 	spin_unlock(&priv->lock);
-	return 0;
-} /* agnx_config_interface */
+} /* agnx_bss_info_changed */
 
 
 static void agnx_configure_filter(struct ieee80211_hw *dev,
@@ -422,7 +425,7 @@ static struct ieee80211_ops agnx_ops = {
 	.add_interface		= agnx_add_interface,
 	.remove_interface	= agnx_remove_interface,
 	.config			= agnx_config,
-	.config_interface	= agnx_config_interface,
+	.bss_info_changed	= agnx_bss_info_changed,
 	.configure_filter	= agnx_configure_filter,
 	.get_stats		= agnx_get_stats,
 	.get_tx_stats		= agnx_get_tx_stats,
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index c8af9a868d6..3f303ae97b4 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -3242,12 +3242,11 @@ static int at76_tx(struct sk_buff *skb, struct net_device *netdev)
 			       "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
 			       priv->netdev->name, priv->tx_urb,
 			       priv->tx_urb->hcpriv, priv->tx_urb->complete);
-	} else {
+	} else
 		stats->tx_bytes += skb->len;
-		dev_kfree_skb(skb);
-	}
 
-	return ret;
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
 }
 
 static void at76_tx_timeout(struct net_device *netdev)
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 951c73d5db2..59e99cc7786 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -585,11 +585,11 @@ int et131x_tx(struct sk_buff *skb, struct net_device *netdev)
 			 * available
 			 */
 			netif_stop_queue(netdev);
-			status = 1;
+			status = NETDEV_TX_BUSY;
 		} else {
 			DBG_WARNING(et131x_dbginfo,
 				    "Misc error; drop packet\n");
-			status = 0;
+			status = NETDEV_TX_OK;
 		}
 	}
 
diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/go7007/go7007.txt
index 9f6772bc68c..1c2907c1dc8 100644
--- a/drivers/staging/go7007/go7007.txt
+++ b/drivers/staging/go7007/go7007.txt
@@ -2,7 +2,7 @@ This is a driver for the WIS GO7007SB multi-format video encoder.
 
 Pete Eberlein <pete@sensoray.com>
 
-The driver was orignally released under the GPL and is currently hosted at:
+The driver was originally released under the GPL and is currently hosted at:
 http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
 The go7007 firmware can be acquired from the package on the site above.
 
@@ -24,7 +24,7 @@ These should be used instead of the non-standard GO7007 ioctls described
 below.
 
 
-The README files from the orignal package appear below:
+The README files from the original package appears below:
 
 ---------------------------------------------------------------------------
                      WIS GO7007SB Public Linux Driver
diff --git a/drivers/staging/panel/lcd-panel-cgram.txt b/drivers/staging/panel/lcd-panel-cgram.txt
index f9ceef4322a..7f82c905763 100644
--- a/drivers/staging/panel/lcd-panel-cgram.txt
+++ b/drivers/staging/panel/lcd-panel-cgram.txt
@@ -3,7 +3,7 @@ characters 0 to 7. The escape code to define a new character is
 '\e[LG' followed by one digit from 0 to 7, representing the character
 number, and up to 8 couples of hex digits terminated by a semi-colon
 (';'). Each couple of digits represents a line, with 1-bits for each
-illuminated pixel with LSB on the right. Lines are numberred from the
+illuminated pixel with LSB on the right. Lines are numbered from the
 top of the character to the bottom. On a 5x7 matrix, only the 5 lower
 bits of the 7 first bytes are used for each character. If the string
 is incomplete, only complete lines will be redefined. Here are some
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index c00f9ab9c46..2edf2999f5c 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -5664,7 +5664,7 @@ VOID 	AsicUpdateProtect(
 #if 0
 	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
 #else
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 #ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index 8a82cee8bf2..a26bc033337 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -5561,7 +5561,7 @@ VOID 	AsicUpdateProtect(
 #if 0
 	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
 #else
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 #ifdef DOT11_N_SUPPORT
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c
index 0ffbfa36699..0189bab013c 100644
--- a/drivers/staging/rt3070/common/mlme.c
+++ b/drivers/staging/rt3070/common/mlme.c
@@ -5575,7 +5575,7 @@ VOID 	AsicUpdateProtect(
 	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
 	MacReg &= 0xFF0000FF;
 
-	// If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
     if ((
 #ifdef DOT11_N_SUPPORT
 		(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
index 33a0687252a..1294e05fcf1 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
@@ -814,7 +814,7 @@ int ieee80211_xmit(struct sk_buff *skb,
 	spin_unlock_irqrestore(&ieee->lock, flags);
 	netif_stop_queue(dev);
 	stats->tx_errors++;
-	return 1;
+	return NETDEV_TX_BUSY;
 
 }
 
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
index 9c62f787cc9..39d0926d1a9 100644
--- a/drivers/staging/uc2322/aten2011.c
+++ b/drivers/staging/uc2322/aten2011.c
@@ -2336,7 +2336,7 @@ static int ATEN2011_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void ATEN2011_shutdown(struct usb_serial *serial)
+static void ATEN2011_release(struct usb_serial *serial)
 {
 	int i;
 	struct ATENINTL_port *ATEN2011_port;
@@ -2382,7 +2382,7 @@ static struct usb_serial_driver aten_serial_driver = {
 	.tiocmget =		ATEN2011_tiocmget,
 	.tiocmset =		ATEN2011_tiocmset,
 	.attach =		ATEN2011_startup,
-	.shutdown =		ATEN2011_shutdown,
+	.release =		ATEN2011_release,
 	.read_bulk_callback =	ATEN2011_bulk_in_callback,
 	.read_int_callback =	ATEN2011_interrupt_callback,
 };
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index 888198c9a10..824e65bdc43 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -2424,7 +2424,7 @@ int hfa384x_drvr_ramdl_write(hfa384x_t *hw, u32 daddr, void *buf, u32 len)
 *	0		success
 *	>0		f/w reported error - f/w status code
 *	<0		driver reported error
-*	-ETIMEOUT	timout waiting for the cmd regs to become
+*	-ETIMEDOUT	timout waiting for the cmd regs to become
 *			available, or waiting for the control reg
 *			to indicate the Aux port is enabled.
 *	-ENODATA	the buffer does NOT contain a valid PDA.
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index 393e4df70df..bc0d764d851 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -432,21 +432,21 @@ static int p80211knetdev_hard_start_xmit(struct sk_buff *skb,
 		/* success and more buf */
 		/* avail, re: hw_txdata */
 		netif_wake_queue(wlandev->netdev);
-		result = 0;
+		result = NETDEV_TX_OK;
 	} else if (txresult == 1) {
 		/* success, no more avail */
 		pr_debug("txframe success, no more bufs\n");
 		/* netdev->tbusy = 1;  don't set here, irqhdlr */
 		/*   may have already cleared it */
-		result = 0;
+		result = NETDEV_TX_OK;
 	} else if (txresult == 2) {
 		/* alloc failure, drop frame */
 		pr_debug("txframe returned alloc_fail\n");
-		result = 1;
+		result = NETDEV_TX_BUSY;
 	} else {
 		/* buffer full or queue busy, drop frame. */
 		pr_debug("txframe returned full or busy\n");
-		result = 1;
+		result = NETDEV_TX_BUSY;
 	}
 
 failed:
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 5e38ba10a3a..0a69672097a 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -417,7 +417,7 @@ static LIST_HEAD(thermal_hwmon_list);
 static ssize_t
 name_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct thermal_hwmon_device *hwmon = dev->driver_data;
+	struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev);
 	return sprintf(buf, "%s\n", hwmon->type);
 }
 static DEVICE_ATTR(name, 0444, name_show, NULL);
@@ -488,7 +488,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 		result = PTR_ERR(hwmon->device);
 		goto free_mem;
 	}
-	hwmon->device->driver_data = hwmon;
+	dev_set_drvdata(hwmon->device, hwmon);
 	result = device_create_file(hwmon->device, &dev_attr_name);
 	if (result)
 		goto unregister_hwmon_device;
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 5eee3f82be5..dcd49f1e96d 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -64,6 +64,7 @@ config USB_ARCH_HAS_EHCI
 config USB
 	tristate "Support for Host-side USB"
 	depends on USB_ARCH_HAS_HCD
+	select NLS  # for UTF-8 strings
 	---help---
 	  Universal Serial Bus (USB) is a specification for a serial bus
 	  subsystem which offers higher speeds and more features than the
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 0a3dc5ece63..19cb7d5480d 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
 obj-$(CONFIG_USB_OHCI_HCD)	+= host/
 obj-$(CONFIG_USB_UHCI_HCD)	+= host/
 obj-$(CONFIG_USB_FHCI_HCD)	+= host/
+obj-$(CONFIG_USB_XHCI_HCD)	+= host/
 obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 9cf9ff69e3e..d171b563e94 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -306,6 +306,7 @@ enum {
 #define FW_GET_BYTE(p)	*((__u8 *) (p))
 
 #define FW_DIR "ueagle-atm/"
+#define UEA_FW_NAME_MAX 30
 #define NB_MODEM 4
 
 #define BULK_TIMEOUT 300
@@ -1564,9 +1565,9 @@ static void cmvs_file_name(struct uea_softc *sc, char *const cmv_name, int ver)
 		file = cmv_file[sc->modem_index];
 
 	strcpy(cmv_name, FW_DIR);
-	strlcat(cmv_name, file, FIRMWARE_NAME_MAX);
+	strlcat(cmv_name, file, UEA_FW_NAME_MAX);
 	if (ver == 2)
-		strlcat(cmv_name, ".v2", FIRMWARE_NAME_MAX);
+		strlcat(cmv_name, ".v2", UEA_FW_NAME_MAX);
 }
 
 static int request_cmvs_old(struct uea_softc *sc,
@@ -1574,7 +1575,7 @@ static int request_cmvs_old(struct uea_softc *sc,
 {
 	int ret, size;
 	u8 *data;
-	char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
+	char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
 
 	cmvs_file_name(sc, cmv_name, 1);
 	ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
@@ -1608,7 +1609,7 @@ static int request_cmvs(struct uea_softc *sc,
 	int ret, size;
 	u32 crc;
 	u8 *data;
-	char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
+	char cmv_name[UEA_FW_NAME_MAX]; /* 30 bytes stack variable */
 
 	cmvs_file_name(sc, cmv_name, 2);
 	ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index ddeb6919253..38bfdb0f666 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -937,9 +937,9 @@ static int acm_probe(struct usb_interface *intf,
 	int buflen = intf->altsetting->extralen;
 	struct usb_interface *control_interface;
 	struct usb_interface *data_interface;
-	struct usb_endpoint_descriptor *epctrl;
-	struct usb_endpoint_descriptor *epread;
-	struct usb_endpoint_descriptor *epwrite;
+	struct usb_endpoint_descriptor *epctrl = NULL;
+	struct usb_endpoint_descriptor *epread = NULL;
+	struct usb_endpoint_descriptor *epwrite = NULL;
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct acm *acm;
 	int minor;
@@ -952,6 +952,7 @@ static int acm_probe(struct usb_interface *intf,
 	unsigned long quirks;
 	int num_rx_buf;
 	int i;
+	int combined_interfaces = 0;
 
 	/* normal quirks */
 	quirks = (unsigned long)id->driver_info;
@@ -1033,9 +1034,15 @@ next_desc:
 			data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
 			control_interface = intf;
 		} else {
-			dev_dbg(&intf->dev,
-					"No union descriptor, giving up\n");
-			return -ENODEV;
+			if (intf->cur_altsetting->desc.bNumEndpoints != 3) {
+				dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+				return -ENODEV;
+			} else {
+				dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n");
+				combined_interfaces = 1;
+				control_interface = data_interface = intf;
+				goto look_for_collapsed_interface;
+			}
 		}
 	} else {
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
@@ -1049,6 +1056,36 @@ next_desc:
 	if (data_interface_num != call_interface_num)
 		dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
 
+	if (control_interface == data_interface) {
+		/* some broken devices designed for windows work this way */
+		dev_warn(&intf->dev,"Control and data interfaces are not separated!\n");
+		combined_interfaces = 1;
+		/* a popular other OS doesn't use it */
+		quirks |= NO_CAP_LINE;
+		if (data_interface->cur_altsetting->desc.bNumEndpoints != 3) {
+			dev_err(&intf->dev, "This needs exactly 3 endpoints\n");
+			return -EINVAL;
+		}
+look_for_collapsed_interface:
+		for (i = 0; i < 3; i++) {
+			struct usb_endpoint_descriptor *ep;
+			ep = &data_interface->cur_altsetting->endpoint[i].desc;
+
+			if (usb_endpoint_is_int_in(ep))
+				epctrl = ep;
+			else if (usb_endpoint_is_bulk_out(ep))
+				epwrite = ep;
+			else if (usb_endpoint_is_bulk_in(ep))
+				epread = ep;
+			else
+				return -EINVAL;
+		}
+		if (!epctrl || !epread || !epwrite)
+			return -ENODEV;
+		else
+			goto made_compressed_probe;
+	}
+
 skip_normal_probe:
 
 	/*workaround for switched interfaces */
@@ -1068,10 +1105,11 @@ skip_normal_probe:
 	}
 
 	/* Accept probe requests only for the control interface */
-	if (intf != control_interface)
+	if (!combined_interfaces && intf != control_interface)
 		return -ENODEV;
 
-	if (usb_interface_claimed(data_interface)) { /* valid in this context */
+	if (!combined_interfaces && usb_interface_claimed(data_interface)) {
+		/* valid in this context */
 		dev_dbg(&intf->dev, "The data interface isn't available\n");
 		return -EBUSY;
 	}
@@ -1095,6 +1133,7 @@ skip_normal_probe:
 		epread = epwrite;
 		epwrite = t;
 	}
+made_compressed_probe:
 	dbg("interfaces are valid");
 	for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
 
@@ -1112,12 +1151,15 @@ skip_normal_probe:
 	ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
 	readsize = le16_to_cpu(epread->wMaxPacketSize) *
 				(quirks == SINGLE_RX_URB ? 1 : 2);
+	acm->combined_interfaces = combined_interfaces;
 	acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
 	acm->control = control_interface;
 	acm->data = data_interface;
 	acm->minor = minor;
 	acm->dev = usb_dev;
 	acm->ctrl_caps = ac_management_function;
+	if (quirks & NO_CAP_LINE)
+		acm->ctrl_caps &= ~USB_CDC_CAP_LINE;
 	acm->ctrlsize = ctrlsize;
 	acm->readsize = readsize;
 	acm->rx_buflimit = num_rx_buf;
@@ -1223,9 +1265,10 @@ skip_normal_probe:
 
 skip_countries:
 	usb_fill_int_urb(acm->ctrlurb, usb_dev,
-			usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
-			acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
-			epctrl->bInterval);
+			 usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+			 acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+			 /* works around buggy devices */
+			 epctrl->bInterval ? epctrl->bInterval : 0xff);
 	acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	acm->ctrlurb->transfer_dma = acm->ctrl_dma;
 
@@ -1312,7 +1355,8 @@ static void acm_disconnect(struct usb_interface *intf)
 								acm->ctrl_dma);
 	acm_read_buffers_free(acm);
 
-	usb_driver_release_interface(&acm_driver, intf == acm->control ?
+	if (!acm->combined_interfaces)
+		usb_driver_release_interface(&acm_driver, intf == acm->control ?
 					acm->data : acm->control);
 
 	if (acm->port.count == 0) {
@@ -1451,6 +1495,9 @@ static struct usb_device_id acm_ids[] = {
 					   Maybe we should define a new
 					   quirk for this. */
 	},
+	{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 4c3856420ad..1602324808b 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -125,6 +125,7 @@ struct acm {
 	unsigned char clocal;				/* termios CLOCAL */
 	unsigned int ctrl_caps;				/* control capabilities from the class specific header */
 	unsigned int susp_count;			/* number of suspended interfaces */
+	int combined_interfaces:1;			/* control and data collapsed */
 	struct acm_wb *delayed_wb;			/* write queued for a device about to be woken */
 };
 
@@ -133,3 +134,4 @@ struct acm {
 /* constants describing various quirks and errors */
 #define NO_UNION_NORMAL			1
 #define SINGLE_RX_URB			2
+#define NO_CAP_LINE			4
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index d2747a49b97..26c09f0257d 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -1057,8 +1057,14 @@ static const struct file_operations usblp_fops = {
 	.release =	usblp_release,
 };
 
+static char *usblp_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
 static struct usb_class_driver usblp_class = {
 	.name =		"lp%d",
+	.nodename =	usblp_nodename,
 	.fops =		&usblp_fops,
 	.minor_base =	USBLP_MINOR_BASE,
 };
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index c40a9b284cc..3703789d0d2 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -927,21 +927,27 @@ static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	switch (cmd) {
 	case USBTMC_IOCTL_CLEAR_OUT_HALT:
 		retval = usbtmc_ioctl_clear_out_halt(data);
+		break;
 
 	case USBTMC_IOCTL_CLEAR_IN_HALT:
 		retval = usbtmc_ioctl_clear_in_halt(data);
+		break;
 
 	case USBTMC_IOCTL_INDICATOR_PULSE:
 		retval = usbtmc_ioctl_indicator_pulse(data);
+		break;
 
 	case USBTMC_IOCTL_CLEAR:
 		retval = usbtmc_ioctl_clear(data);
+		break;
 
 	case USBTMC_IOCTL_ABORT_BULK_OUT:
 		retval = usbtmc_ioctl_abort_bulk_out(data);
+		break;
 
 	case USBTMC_IOCTL_ABORT_BULK_IN:
 		retval = usbtmc_ioctl_abort_bulk_in(data);
+		break;
 	}
 
 	mutex_unlock(&data->io_mutex);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index e1759d17ac5..69280c35b5c 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -28,7 +28,7 @@ comment "Miscellaneous USB options"
 	depends on USB
 
 config USB_DEVICEFS
-	bool "USB device filesystem"
+	bool "USB device filesystem (DEPRECATED)" if EMBEDDED
 	depends on USB
 	---help---
 	  If you say Y here (and to "/proc file system support" in the "File
@@ -46,11 +46,15 @@ config USB_DEVICEFS
 	  For the format of the various /proc/bus/usb/ files, please read
 	  <file:Documentation/usb/proc_usb_info.txt>.
 
-	  Usbfs files can't handle Access Control Lists (ACL), which are the
-	  default way to grant access to USB devices for untrusted users of a
-	  desktop system. The usbfs functionality is replaced by real
-	  device-nodes managed by udev. These nodes live in /dev/bus/usb and
-	  are used by libusb.
+	  Modern Linux systems do not use this.
+
+	  Usbfs entries are files and not character devices; usbfs can't
+	  handle Access Control Lists (ACL) which are the default way to
+	  grant access to USB devices for untrusted users of a desktop
+	  system.
+
+	  The usbfs functionality is replaced by real device-nodes managed by
+	  udev.  These nodes lived in /dev/bus/usb and are used by libusb.
 
 config USB_DEVICE_CLASS
 	bool "USB device class-devices (DEPRECATED)"
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index b6078706fb9..ec16e602990 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -4,14 +4,14 @@
 
 usbcore-objs	:= usb.o hub.o hcd.o urb.o message.o driver.o \
 			config.o file.o buffer.o sysfs.o endpoint.o \
-			devio.o notify.o generic.o quirks.o
+			devio.o notify.o generic.o quirks.o devices.o
 
 ifeq ($(CONFIG_PCI),y)
 	usbcore-objs	+= hcd-pci.o
 endif
 
 ifeq ($(CONFIG_USB_DEVICEFS),y)
-	usbcore-objs	+= inode.o devices.o
+	usbcore-objs	+= inode.o
 endif
 
 obj-$(CONFIG_USB)	+= usbcore.o
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 568244c99bd..24dfb33f90c 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -19,6 +19,32 @@ static inline const char *plural(int n)
 	return (n == 1 ? "" : "s");
 }
 
+/* FIXME: this is a kludge */
+static int find_next_descriptor_more(unsigned char *buffer, int size,
+    int dt1, int dt2, int dt3, int *num_skipped)
+{
+	struct usb_descriptor_header *h;
+	int n = 0;
+	unsigned char *buffer0 = buffer;
+
+	/* Find the next descriptor of type dt1 or dt2 or dt3 */
+	while (size > 0) {
+		h = (struct usb_descriptor_header *) buffer;
+		if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2 ||
+				h->bDescriptorType == dt3)
+			break;
+		buffer += h->bLength;
+		size -= h->bLength;
+		++n;
+	}
+
+	/* Store the number of descriptors skipped and return the
+	 * number of bytes skipped */
+	if (num_skipped)
+		*num_skipped = n;
+	return buffer - buffer0;
+}
+
 static int find_next_descriptor(unsigned char *buffer, int size,
     int dt1, int dt2, int *num_skipped)
 {
@@ -43,6 +69,129 @@ static int find_next_descriptor(unsigned char *buffer, int size,
 	return buffer - buffer0;
 }
 
+static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
+		int inum, int asnum, struct usb_host_endpoint *ep,
+		int num_ep, unsigned char *buffer, int size)
+{
+	unsigned char *buffer_start = buffer;
+	struct usb_ss_ep_comp_descriptor	*desc;
+	int retval;
+	int num_skipped;
+	int max_tx;
+	int i;
+
+	/* Allocate space for the SS endpoint companion descriptor */
+	ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+			GFP_KERNEL);
+	if (!ep->ss_ep_comp)
+		return -ENOMEM;
+	desc = (struct usb_ss_ep_comp_descriptor *) buffer;
+	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
+		dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
+				" interface %d altsetting %d ep %d: "
+				"using minimum values\n",
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+		ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+		ep->ss_ep_comp->desc.bMaxBurst = 0;
+		/*
+		 * Leave bmAttributes as zero, which will mean no streams for
+		 * bulk, and isoc won't support multiple bursts of packets.
+		 * With bursts of only one packet, and a Mult of 1, the max
+		 * amount of data moved per endpoint service interval is one
+		 * packet.
+		 */
+		if (usb_endpoint_xfer_isoc(&ep->desc) ||
+				usb_endpoint_xfer_int(&ep->desc))
+			ep->ss_ep_comp->desc.wBytesPerInterval =
+				ep->desc.wMaxPacketSize;
+		/*
+		 * The next descriptor is for an Endpoint or Interface,
+		 * no extra descriptors to copy into the companion structure,
+		 * and we didn't eat up any of the buffer.
+		 */
+		retval = 0;
+		goto valid;
+	}
+	memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
+	desc = &ep->ss_ep_comp->desc;
+	buffer += desc->bLength;
+	size -= desc->bLength;
+
+	/* Eat up the other descriptors we don't care about */
+	ep->ss_ep_comp->extra = buffer;
+	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+			USB_DT_INTERFACE, &num_skipped);
+	ep->ss_ep_comp->extralen = i;
+	buffer += i;
+	size -= i;
+	retval = buffer - buffer_start + i;
+	if (num_skipped > 0)
+		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+				num_skipped, plural(num_skipped),
+				"SuperSpeed endpoint companion");
+
+	/* Check the various values */
+	if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
+		dev_warn(ddev, "Control endpoint with bMaxBurst = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to zero\n", desc->bMaxBurst,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		desc->bMaxBurst = 0;
+	}
+	if (desc->bMaxBurst > 15) {
+		dev_warn(ddev, "Endpoint with bMaxBurst = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to 15\n", desc->bMaxBurst,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		desc->bMaxBurst = 15;
+	}
+	if ((usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_int(&ep->desc))
+			&& desc->bmAttributes != 0) {
+		dev_warn(ddev, "%s endpoint with bmAttributes = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to zero\n",
+				usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
+				desc->bmAttributes,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		desc->bmAttributes = 0;
+	}
+	if (usb_endpoint_xfer_bulk(&ep->desc) && desc->bmAttributes > 16) {
+		dev_warn(ddev, "Bulk endpoint with more than 65536 streams in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to max\n",
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		desc->bmAttributes = 16;
+	}
+	if (usb_endpoint_xfer_isoc(&ep->desc) && desc->bmAttributes > 2) {
+		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to 3\n", desc->bmAttributes + 1,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		desc->bmAttributes = 2;
+	}
+	if (usb_endpoint_xfer_isoc(&ep->desc)) {
+		max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1) *
+			(desc->bmAttributes + 1);
+	} else if (usb_endpoint_xfer_int(&ep->desc)) {
+		max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1);
+	} else {
+		goto valid;
+	}
+	if (desc->wBytesPerInterval > max_tx) {
+		dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to %d\n",
+				usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int",
+				desc->wBytesPerInterval,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress,
+				max_tx);
+		desc->wBytesPerInterval = max_tx;
+	}
+valid:
+	return retval;
+}
+
 static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
     int asnum, struct usb_host_interface *ifp, int num_ep,
     unsigned char *buffer, int size)
@@ -50,7 +199,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 	unsigned char *buffer0 = buffer;
 	struct usb_endpoint_descriptor *d;
 	struct usb_host_endpoint *endpoint;
-	int n, i, j;
+	int n, i, j, retval;
 
 	d = (struct usb_endpoint_descriptor *) buffer;
 	buffer += d->bLength;
@@ -92,6 +241,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 	if (usb_endpoint_xfer_int(d)) {
 		i = 1;
 		switch (to_usb_device(ddev)->speed) {
+		case USB_SPEED_SUPER:
 		case USB_SPEED_HIGH:
 			/* Many device manufacturers are using full-speed
 			 * bInterval values in high-speed interrupt endpoint
@@ -161,17 +311,39 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 				cfgno, inum, asnum, d->bEndpointAddress,
 				maxp);
 	}
-
-	/* Skip over any Class Specific or Vendor Specific descriptors;
-	 * find the next endpoint or interface descriptor */
-	endpoint->extra = buffer;
-	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
-	    USB_DT_INTERFACE, &n);
-	endpoint->extralen = i;
+	/* Allocate room for and parse any SS endpoint companion descriptors */
+	if (to_usb_device(ddev)->speed == USB_SPEED_SUPER) {
+		endpoint->extra = buffer;
+		i = find_next_descriptor_more(buffer, size, USB_DT_SS_ENDPOINT_COMP,
+				USB_DT_ENDPOINT, USB_DT_INTERFACE, &n);
+		endpoint->extralen = i;
+		buffer += i;
+		size -= i;
+
+		if (size > 0) {
+			retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
+					inum, asnum, endpoint, num_ep, buffer,
+					size);
+			if (retval >= 0) {
+				buffer += retval;
+				retval = buffer - buffer0;
+			}
+		} else {
+			retval = buffer - buffer0;
+		}
+	} else {
+		/* Skip over any Class Specific or Vendor Specific descriptors;
+		 * find the next endpoint or interface descriptor */
+		endpoint->extra = buffer;
+		i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+				USB_DT_INTERFACE, &n);
+		endpoint->extralen = i;
+		retval = buffer - buffer0 + i;
+	}
 	if (n > 0)
 		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
 		    n, plural(n), "endpoint");
-	return buffer - buffer0 + i;
+	return retval;
 
 skip_to_next_endpoint_or_interface_descriptor:
 	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
@@ -452,6 +624,8 @@ static int usb_parse_configuration(struct device *ddev, int cfgidx,
 		kref_init(&intfc->ref);
 	}
 
+	/* FIXME: parse the BOS descriptor */
+
 	/* Skip over any Class Specific or Vendor Specific descriptors;
 	 * find the first interface descriptor */
 	config->extra = buffer;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d0a21a5f820..69e5773abfc 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -154,16 +154,11 @@ static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *in
 static int usb_probe_device(struct device *dev)
 {
 	struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
-	struct usb_device *udev;
+	struct usb_device *udev = to_usb_device(dev);
 	int error = -ENODEV;
 
 	dev_dbg(dev, "%s\n", __func__);
 
-	if (!is_usb_device(dev))	/* Sanity check */
-		return error;
-
-	udev = to_usb_device(dev);
-
 	/* TODO: Add real matching code */
 
 	/* The device should always appear to be in use
@@ -203,18 +198,13 @@ static void usb_cancel_queued_reset(struct usb_interface *iface)
 static int usb_probe_interface(struct device *dev)
 {
 	struct usb_driver *driver = to_usb_driver(dev->driver);
-	struct usb_interface *intf;
-	struct usb_device *udev;
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
 	const struct usb_device_id *id;
 	int error = -ENODEV;
 
 	dev_dbg(dev, "%s\n", __func__);
 
-	if (is_usb_device(dev))		/* Sanity check */
-		return error;
-
-	intf = to_usb_interface(dev);
-	udev = interface_to_usbdev(intf);
 	intf->needs_binding = 0;
 
 	if (udev->authorized == 0) {
@@ -385,7 +375,6 @@ void usb_driver_release_interface(struct usb_driver *driver,
 					struct usb_interface *iface)
 {
 	struct device *dev = &iface->dev;
-	struct usb_device *udev = interface_to_usbdev(iface);
 
 	/* this should never happen, don't release something that's not ours */
 	if (!dev->driver || dev->driver != &driver->drvwrap.driver)
@@ -394,23 +383,19 @@ void usb_driver_release_interface(struct usb_driver *driver,
 	/* don't release from within disconnect() */
 	if (iface->condition != USB_INTERFACE_BOUND)
 		return;
+	iface->condition = USB_INTERFACE_UNBINDING;
 
-	/* don't release if the interface hasn't been added yet */
+	/* Release via the driver core only if the interface
+	 * has already been registered
+	 */
 	if (device_is_registered(dev)) {
-		iface->condition = USB_INTERFACE_UNBINDING;
 		device_release_driver(dev);
 	} else {
-		iface->condition = USB_INTERFACE_UNBOUND;
-		usb_cancel_queued_reset(iface);
+		down(&dev->sem);
+		usb_unbind_interface(dev);
+		dev->driver = NULL;
+		up(&dev->sem);
 	}
-	dev->driver = NULL;
-	usb_set_intfdata(iface, NULL);
-
-	usb_pm_lock(udev);
-	iface->condition = USB_INTERFACE_UNBOUND;
-	mark_quiesced(iface);
-	iface->needs_remote_wakeup = 0;
-	usb_pm_unlock(udev);
 }
 EXPORT_SYMBOL_GPL(usb_driver_release_interface);
 
@@ -598,7 +583,7 @@ static int usb_device_match(struct device *dev, struct device_driver *drv)
 		/* TODO: Add real matching code */
 		return 1;
 
-	} else {
+	} else if (is_usb_interface(dev)) {
 		struct usb_interface *intf;
 		struct usb_driver *usb_drv;
 		const struct usb_device_id *id;
@@ -630,11 +615,14 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 	/* driver is often null here; dev_dbg() would oops */
 	pr_debug("usb %s: uevent\n", dev_name(dev));
 
-	if (is_usb_device(dev))
+	if (is_usb_device(dev)) {
 		usb_dev = to_usb_device(dev);
-	else {
+	} else if (is_usb_interface(dev)) {
 		struct usb_interface *intf = to_usb_interface(dev);
+
 		usb_dev = interface_to_usbdev(intf);
+	} else {
+		return 0;
 	}
 
 	if (usb_dev->devnum < 0) {
@@ -1762,6 +1750,7 @@ int usb_suspend(struct device *dev, pm_message_t msg)
 int usb_resume(struct device *dev, pm_message_t msg)
 {
 	struct usb_device	*udev;
+	int			status;
 
 	udev = to_usb_device(dev);
 
@@ -1771,7 +1760,14 @@ int usb_resume(struct device *dev, pm_message_t msg)
 	 */
 	if (udev->skip_sys_resume)
 		return 0;
-	return usb_external_resume_device(udev, msg);
+	status = usb_external_resume_device(udev, msg);
+
+	/* Avoid PM error messages for devices disconnected while suspended
+	 * as we'll display regular disconnect messages just a bit later.
+	 */
+	if (status == -ENODEV)
+		return 0;
+	return status;
 }
 
 #endif /* CONFIG_PM */
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 40dee2ac013..bc39fc40bbd 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -15,19 +15,18 @@
 #include <linux/usb.h>
 #include "usb.h"
 
-#define MAX_ENDPOINT_MINORS (64*128*32)
-static int usb_endpoint_major;
-static DEFINE_IDR(endpoint_idr);
-
 struct ep_device {
 	struct usb_endpoint_descriptor *desc;
 	struct usb_device *udev;
 	struct device dev;
-	int minor;
 };
 #define to_ep_device(_dev) \
 	container_of(_dev, struct ep_device, dev)
 
+struct device_type usb_ep_device_type = {
+	.name =		"usb_endpoint",
+};
+
 struct ep_attribute {
 	struct attribute attr;
 	ssize_t (*show)(struct usb_device *,
@@ -160,118 +159,10 @@ static struct attribute_group *ep_dev_groups[] = {
 	NULL
 };
 
-static int usb_endpoint_major_init(void)
-{
-	dev_t dev;
-	int error;
-
-	error = alloc_chrdev_region(&dev, 0, MAX_ENDPOINT_MINORS,
-				    "usb_endpoint");
-	if (error) {
-		printk(KERN_ERR "Unable to get a dynamic major for "
-		       "usb endpoints.\n");
-		return error;
-	}
-	usb_endpoint_major = MAJOR(dev);
-
-	return error;
-}
-
-static void usb_endpoint_major_cleanup(void)
-{
-	unregister_chrdev_region(MKDEV(usb_endpoint_major, 0),
-				 MAX_ENDPOINT_MINORS);
-}
-
-static int endpoint_get_minor(struct ep_device *ep_dev)
-{
-	static DEFINE_MUTEX(minor_lock);
-	int retval = -ENOMEM;
-	int id;
-
-	mutex_lock(&minor_lock);
-	if (idr_pre_get(&endpoint_idr, GFP_KERNEL) == 0)
-		goto exit;
-
-	retval = idr_get_new(&endpoint_idr, ep_dev, &id);
-	if (retval < 0) {
-		if (retval == -EAGAIN)
-			retval = -ENOMEM;
-		goto exit;
-	}
-	ep_dev->minor = id & MAX_ID_MASK;
-exit:
-	mutex_unlock(&minor_lock);
-	return retval;
-}
-
-static void endpoint_free_minor(struct ep_device *ep_dev)
-{
-	idr_remove(&endpoint_idr, ep_dev->minor);
-}
-
-static struct endpoint_class {
-	struct kref kref;
-	struct class *class;
-} *ep_class;
-
-static int init_endpoint_class(void)
-{
-	int result = 0;
-
-	if (ep_class != NULL) {
-		kref_get(&ep_class->kref);
-		goto exit;
-	}
-
-	ep_class = kmalloc(sizeof(*ep_class), GFP_KERNEL);
-	if (!ep_class) {
-		result = -ENOMEM;
-		goto exit;
-	}
-
-	kref_init(&ep_class->kref);
-	ep_class->class = class_create(THIS_MODULE, "usb_endpoint");
-	if (IS_ERR(ep_class->class)) {
-		result = PTR_ERR(ep_class->class);
-		goto class_create_error;
-	}
-
-	result = usb_endpoint_major_init();
-	if (result)
-		goto endpoint_major_error;
-
-	goto exit;
-
-endpoint_major_error:
-	class_destroy(ep_class->class);
-class_create_error:
-	kfree(ep_class);
-	ep_class = NULL;
-exit:
-	return result;
-}
-
-static void release_endpoint_class(struct kref *kref)
-{
-	/* Ok, we cheat as we know we only have one ep_class */
-	class_destroy(ep_class->class);
-	kfree(ep_class);
-	ep_class = NULL;
-	usb_endpoint_major_cleanup();
-}
-
-static void destroy_endpoint_class(void)
-{
-	if (ep_class)
-		kref_put(&ep_class->kref, release_endpoint_class);
-}
-
 static void ep_device_release(struct device *dev)
 {
 	struct ep_device *ep_dev = to_ep_device(dev);
 
-	endpoint_free_minor(ep_dev);
 	kfree(ep_dev);
 }
 
@@ -279,62 +170,32 @@ int usb_create_ep_devs(struct device *parent,
 			struct usb_host_endpoint *endpoint,
 			struct usb_device *udev)
 {
-	char name[8];
 	struct ep_device *ep_dev;
 	int retval;
 
-	retval = init_endpoint_class();
-	if (retval)
-		goto exit;
-
 	ep_dev = kzalloc(sizeof(*ep_dev), GFP_KERNEL);
 	if (!ep_dev) {
 		retval = -ENOMEM;
-		goto error_alloc;
-	}
-
-	retval = endpoint_get_minor(ep_dev);
-	if (retval) {
-		dev_err(parent, "can not allocate minor number for %s\n",
-			dev_name(&ep_dev->dev));
-		goto error_register;
+		goto exit;
 	}
 
 	ep_dev->desc = &endpoint->desc;
 	ep_dev->udev = udev;
 	ep_dev->dev.groups = ep_dev_groups;
-	ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor);
-	ep_dev->dev.class = ep_class->class;
+	ep_dev->dev.type = &usb_ep_device_type;
 	ep_dev->dev.parent = parent;
 	ep_dev->dev.release = ep_device_release;
-	dev_set_name(&ep_dev->dev, "usbdev%d.%d_ep%02x",
-		 udev->bus->busnum, udev->devnum,
-		 endpoint->desc.bEndpointAddress);
+	dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress);
 
 	retval = device_register(&ep_dev->dev);
 	if (retval)
-		goto error_chrdev;
+		goto error_register;
 
-	/* create the symlink to the old-style "ep_XX" directory */
-	sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
-	retval = sysfs_create_link(&parent->kobj, &ep_dev->dev.kobj, name);
-	if (retval)
-		goto error_link;
 	endpoint->ep_dev = ep_dev;
 	return retval;
 
-error_link:
-	device_unregister(&ep_dev->dev);
-	destroy_endpoint_class();
-	return retval;
-
-error_chrdev:
-	endpoint_free_minor(ep_dev);
-
 error_register:
 	kfree(ep_dev);
-error_alloc:
-	destroy_endpoint_class();
 exit:
 	return retval;
 }
@@ -344,12 +205,7 @@ void usb_remove_ep_devs(struct usb_host_endpoint *endpoint)
 	struct ep_device *ep_dev = endpoint->ep_dev;
 
 	if (ep_dev) {
-		char name[8];
-
-		sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
-		sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
 		device_unregister(&ep_dev->dev);
 		endpoint->ep_dev = NULL;
-		destroy_endpoint_class();
 	}
 }
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 997e659ff69..5cef88929b3 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -67,6 +67,16 @@ static struct usb_class {
 	struct class *class;
 } *usb_class;
 
+static char *usb_nodename(struct device *dev)
+{
+	struct usb_class_driver *drv;
+
+	drv = dev_get_drvdata(dev);
+	if (!drv || !drv->nodename)
+		return NULL;
+	return drv->nodename(dev);
+}
+
 static int init_usb_class(void)
 {
 	int result = 0;
@@ -90,6 +100,7 @@ static int init_usb_class(void)
 		kfree(usb_class);
 		usb_class = NULL;
 	}
+	usb_class->class->nodename = usb_nodename;
 
 exit:
 	return result;
@@ -198,7 +209,7 @@ int usb_register_dev(struct usb_interface *intf,
 	else
 		temp = name;
 	intf->usb_dev = device_create(usb_class->class, &intf->dev,
-				      MKDEV(USB_MAJOR, minor), NULL,
+				      MKDEV(USB_MAJOR, minor), class_driver,
 				      "%s", temp);
 	if (IS_ERR(intf->usb_dev)) {
 		down_write(&minor_rwsem);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index a4301dc02d2..91f2885b6ee 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -185,194 +185,198 @@ void usb_hcd_pci_remove(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
 
-
-#ifdef	CONFIG_PM
-
 /**
- * usb_hcd_pci_suspend - power management suspend of a PCI-based HCD
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend.
+ * usb_hcd_pci_shutdown - shutdown host controller
+ * @dev: USB Host Controller being shutdown
  */
-int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
+void usb_hcd_pci_shutdown(struct pci_dev *dev)
+{
+	struct usb_hcd		*hcd;
+
+	hcd = pci_get_drvdata(dev);
+	if (!hcd)
+		return;
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
+
+#ifdef	CONFIG_PM_SLEEP
+
+static int check_root_hub_suspended(struct device *dev)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+
+	if (!(hcd->state == HC_STATE_SUSPENDED ||
+			hcd->state == HC_STATE_HALT)) {
+		dev_warn(dev, "Root hub is not suspended\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static int hcd_pci_suspend(struct device *dev)
 {
-	struct usb_hcd		*hcd = pci_get_drvdata(dev);
-	int			retval = 0;
-	int			wake, w;
-	int			has_pci_pm;
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
 
 	/* Root hub suspend should have stopped all downstream traffic,
 	 * and all bus master traffic.  And done so for both the interface
 	 * and the stub usb_device (which we check here).  But maybe it
 	 * didn't; writing sysfs power/state files ignores such rules...
-	 *
-	 * We must ignore the FREEZE vs SUSPEND distinction here, because
-	 * otherwise the swsusp will save (and restore) garbage state.
 	 */
-	if (!(hcd->state == HC_STATE_SUSPENDED ||
-			hcd->state == HC_STATE_HALT)) {
-		dev_warn(&dev->dev, "Root hub is not suspended\n");
-		retval = -EBUSY;
-		goto done;
-	}
+	retval = check_root_hub_suspended(dev);
+	if (retval)
+		return retval;
 
 	/* We might already be suspended (runtime PM -- not yet written) */
-	if (dev->current_state != PCI_D0)
-		goto done;
+	if (pci_dev->current_state != PCI_D0)
+		return retval;
 
 	if (hcd->driver->pci_suspend) {
-		retval = hcd->driver->pci_suspend(hcd, message);
+		retval = hcd->driver->pci_suspend(hcd);
 		suspend_report_result(hcd->driver->pci_suspend, retval);
 		if (retval)
-			goto done;
+			return retval;
 	}
 
-	synchronize_irq(dev->irq);
+	synchronize_irq(pci_dev->irq);
 
 	/* Downstream ports from this root hub should already be quiesced, so
 	 * there will be no DMA activity.  Now we can shut down the upstream
-	 * link (except maybe for PME# resume signaling) and enter some PCI
-	 * low power state, if the hardware allows.
+	 * link (except maybe for PME# resume signaling).  We'll enter a
+	 * low power state during suspend_noirq, if the hardware allows.
 	 */
-	pci_disable_device(dev);
+	pci_disable_device(pci_dev);
+	return retval;
+}
+
+static int hcd_pci_suspend_noirq(struct device *dev)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
+
+	retval = check_root_hub_suspended(dev);
+	if (retval)
+		return retval;
 
-	pci_save_state(dev);
+	pci_save_state(pci_dev);
 
-	/* Don't fail on error to enable wakeup.  We rely on pci code
-	 * to reject requests the hardware can't implement, rather
-	 * than coding the same thing.
+	/* If the root hub is HALTed rather than SUSPENDed,
+	 * disallow remote wakeup.
 	 */
-	wake = (hcd->state == HC_STATE_SUSPENDED &&
-			device_may_wakeup(&dev->dev));
-	w = pci_wake_from_d3(dev, wake);
-	if (w < 0)
-		wake = w;
-	dev_dbg(&dev->dev, "wakeup: %d\n", wake);
-
-	/* Don't change state if we don't need to */
-	if (message.event == PM_EVENT_FREEZE ||
-			message.event == PM_EVENT_PRETHAW) {
-		dev_dbg(&dev->dev, "--> no state change\n");
-		goto done;
-	}
+	if (hcd->state == HC_STATE_HALT)
+		device_set_wakeup_enable(dev, 0);
+	dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
 
-	has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-	if (!has_pci_pm) {
-		dev_dbg(&dev->dev, "--> PCI D0 legacy\n");
+	/* Possibly enable remote wakeup,
+	 * choose the appropriate low-power state, and go to that state.
+	 */
+	retval = pci_prepare_to_sleep(pci_dev);
+	if (retval == -EIO) {		/* Low-power not supported */
+		dev_dbg(dev, "--> PCI D0 legacy\n");
+		retval = 0;
+	} else if (retval == 0) {
+		dev_dbg(dev, "--> PCI %s\n",
+				pci_power_name(pci_dev->current_state));
 	} else {
-
-		/* NOTE:  dev->current_state becomes nonzero only here, and
-		 * only for devices that support PCI PM.  Also, exiting
-		 * PCI_D3 (but not PCI_D1 or PCI_D2) is allowed to reset
-		 * some device state (e.g. as part of clock reinit).
-		 */
-		retval = pci_set_power_state(dev, PCI_D3hot);
-		suspend_report_result(pci_set_power_state, retval);
-		if (retval == 0) {
-			dev_dbg(&dev->dev, "--> PCI D3\n");
-		} else {
-			dev_dbg(&dev->dev, "PCI D3 suspend fail, %d\n",
-					retval);
-			pci_restore_state(dev);
-		}
+		suspend_report_result(pci_prepare_to_sleep, retval);
+		return retval;
 	}
 
 #ifdef CONFIG_PPC_PMAC
-	if (retval == 0) {
-		/* Disable ASIC clocks for USB */
-		if (machine_is(powermac)) {
-			struct device_node	*of_node;
-
-			of_node = pci_device_to_OF_node(dev);
-			if (of_node)
-				pmac_call_feature(PMAC_FTR_USB_ENABLE,
-							of_node, 0, 0);
-		}
+	/* Disable ASIC clocks for USB */
+	if (machine_is(powermac)) {
+		struct device_node	*of_node;
+
+		of_node = pci_device_to_OF_node(pci_dev);
+		if (of_node)
+			pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
 	}
 #endif
-
- done:
 	return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
-/**
- * usb_hcd_pci_resume - power management resume of a PCI-based HCD
- * @dev: USB Host Controller being resumed
- *
- * Store this function in the HCD's struct pci_driver as .resume.
- */
-int usb_hcd_pci_resume(struct pci_dev *dev)
+static int hcd_pci_resume_noirq(struct device *dev)
 {
-	struct usb_hcd		*hcd;
-	int			retval;
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
 
 #ifdef CONFIG_PPC_PMAC
 	/* Reenable ASIC clocks for USB */
 	if (machine_is(powermac)) {
 		struct device_node *of_node;
 
-		of_node = pci_device_to_OF_node(dev);
+		of_node = pci_device_to_OF_node(pci_dev);
 		if (of_node)
 			pmac_call_feature(PMAC_FTR_USB_ENABLE,
 						of_node, 0, 1);
 	}
 #endif
 
-	pci_restore_state(dev);
+	/* Go back to D0 and disable remote wakeup */
+	pci_back_from_sleep(pci_dev);
+	return 0;
+}
+
+static int resume_common(struct device *dev, bool hibernated)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
 
-	hcd = pci_get_drvdata(dev);
 	if (hcd->state != HC_STATE_SUSPENDED) {
-		dev_dbg(hcd->self.controller,
-				"can't resume, not suspended!\n");
+		dev_dbg(dev, "can't resume, not suspended!\n");
 		return 0;
 	}
 
-	pci_enable_wake(dev, PCI_D0, false);
-
-	retval = pci_enable_device(dev);
+	retval = pci_enable_device(pci_dev);
 	if (retval < 0) {
-		dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
-				retval);
+		dev_err(dev, "can't re-enable after resume, %d!\n", retval);
 		return retval;
 	}
 
-	pci_set_master(dev);
-
-	/* yes, ignore this result too... */
-	(void) pci_wake_from_d3(dev, 0);
+	pci_set_master(pci_dev);
 
 	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
 	if (hcd->driver->pci_resume) {
-		retval = hcd->driver->pci_resume(hcd);
+		retval = hcd->driver->pci_resume(hcd, hibernated);
 		if (retval) {
-			dev_err(hcd->self.controller,
-				"PCI post-resume error %d!\n", retval);
+			dev_err(dev, "PCI post-resume error %d!\n", retval);
 			usb_hc_died(hcd);
 		}
 	}
 	return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_resume);
 
-#endif	/* CONFIG_PM */
-
-/**
- * usb_hcd_pci_shutdown - shutdown host controller
- * @dev: USB Host Controller being shutdown
- */
-void usb_hcd_pci_shutdown(struct pci_dev *dev)
+static int hcd_pci_resume(struct device *dev)
 {
-	struct usb_hcd		*hcd;
-
-	hcd = pci_get_drvdata(dev);
-	if (!hcd)
-		return;
+	return resume_common(dev, false);
+}
 
-	if (hcd->driver->shutdown)
-		hcd->driver->shutdown(hcd);
+static int hcd_pci_restore(struct device *dev)
+{
+	return resume_common(dev, true);
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
 
+struct dev_pm_ops usb_hcd_pci_pm_ops = {
+	.suspend	= hcd_pci_suspend,
+	.suspend_noirq	= hcd_pci_suspend_noirq,
+	.resume_noirq	= hcd_pci_resume_noirq,
+	.resume		= hcd_pci_resume,
+	.freeze		= check_root_hub_suspended,
+	.freeze_noirq	= check_root_hub_suspended,
+	.thaw_noirq	= NULL,
+	.thaw		= NULL,
+	.poweroff	= hcd_pci_suspend,
+	.poweroff_noirq	= hcd_pci_suspend_noirq,
+	.restore_noirq	= hcd_pci_resume_noirq,
+	.restore	= hcd_pci_restore,
+};
+EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
+
+#endif	/* CONFIG_PM_SLEEP */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 42b93da1085..ce3f453f02e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -128,6 +128,27 @@ static inline int is_root_hub(struct usb_device *udev)
 #define KERNEL_REL	((LINUX_VERSION_CODE >> 16) & 0x0ff)
 #define KERNEL_VER	((LINUX_VERSION_CODE >> 8) & 0x0ff)
 
+/* usb 3.0 root hub device descriptor */
+static const u8 usb3_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	0x01,       /*  __u8  bDescriptorType; Device */
+	0x00, 0x03, /*  __le16 bcdUSB; v3.0 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x03,       /*  __u8  bDeviceProtocol; USB 3.0 hub */
+	0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation */
+	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
 /* usb 2.0 root hub device descriptor */
 static const u8 usb2_rh_dev_descriptor [18] = {
 	0x12,       /*  __u8  bLength; */
@@ -273,6 +294,47 @@ static const u8 hs_rh_config_descriptor [] = {
 	0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
 };
 
+static const u8 ss_rh_config_descriptor[] = {
+	/* one configuration */
+	0x09,       /*  __u8  bLength; */
+	0x02,       /*  __u8  bDescriptorType; Configuration */
+	0x19, 0x00, /*  __le16 wTotalLength; FIXME */
+	0x01,       /*  __u8  bNumInterfaces; (1) */
+	0x01,       /*  __u8  bConfigurationValue; */
+	0x00,       /*  __u8  iConfiguration; */
+	0xc0,       /*  __u8  bmAttributes;
+				 Bit 7: must be set,
+				     6: Self-powered,
+				     5: Remote wakeup,
+				     4..0: resvd */
+	0x00,       /*  __u8  MaxPower; */
+
+	/* one interface */
+	0x09,       /*  __u8  if_bLength; */
+	0x04,       /*  __u8  if_bDescriptorType; Interface */
+	0x00,       /*  __u8  if_bInterfaceNumber; */
+	0x00,       /*  __u8  if_bAlternateSetting; */
+	0x01,       /*  __u8  if_bNumEndpoints; */
+	0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,       /*  __u8  if_bInterfaceSubClass; */
+	0x00,       /*  __u8  if_bInterfaceProtocol; */
+	0x00,       /*  __u8  if_iInterface; */
+
+	/* one endpoint (status change endpoint) */
+	0x07,       /*  __u8  ep_bLength; */
+	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
+	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+		     * see hub.c:hub_configure() for details. */
+	(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
+	0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
+	/*
+	 * All 3.0 hubs should have an endpoint companion descriptor,
+	 * but we're ignoring that for now.  FIXME?
+	 */
+};
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -426,23 +488,39 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 		switch (wValue & 0xff00) {
 		case USB_DT_DEVICE << 8:
-			if (hcd->driver->flags & HCD_USB2)
+			switch (hcd->driver->flags & HCD_MASK) {
+			case HCD_USB3:
+				bufp = usb3_rh_dev_descriptor;
+				break;
+			case HCD_USB2:
 				bufp = usb2_rh_dev_descriptor;
-			else if (hcd->driver->flags & HCD_USB11)
+				break;
+			case HCD_USB11:
 				bufp = usb11_rh_dev_descriptor;
-			else
+				break;
+			default:
 				goto error;
+			}
 			len = 18;
 			if (hcd->has_tt)
 				patch_protocol = 1;
 			break;
 		case USB_DT_CONFIG << 8:
-			if (hcd->driver->flags & HCD_USB2) {
+			switch (hcd->driver->flags & HCD_MASK) {
+			case HCD_USB3:
+				bufp = ss_rh_config_descriptor;
+				len = sizeof ss_rh_config_descriptor;
+				break;
+			case HCD_USB2:
 				bufp = hs_rh_config_descriptor;
 				len = sizeof hs_rh_config_descriptor;
-			} else {
+				break;
+			case HCD_USB11:
 				bufp = fs_rh_config_descriptor;
 				len = sizeof fs_rh_config_descriptor;
+				break;
+			default:
+				goto error;
 			}
 			if (device_can_wakeup(&hcd->self.root_hub->dev))
 				patch_wakeup = 1;
@@ -755,23 +833,6 @@ static struct attribute_group usb_bus_attr_group = {
 
 /*-------------------------------------------------------------------------*/
 
-static struct class *usb_host_class;
-
-int usb_host_init(void)
-{
-	int retval = 0;
-
-	usb_host_class = class_create(THIS_MODULE, "usb_host");
-	if (IS_ERR(usb_host_class))
-		retval = PTR_ERR(usb_host_class);
-	return retval;
-}
-
-void usb_host_cleanup(void)
-{
-	class_destroy(usb_host_class);
-}
-
 /**
  * usb_bus_init - shared initialization code
  * @bus: the bus structure being initialized
@@ -818,12 +879,6 @@ static int usb_register_bus(struct usb_bus *bus)
 	set_bit (busnum, busmap.busmap);
 	bus->busnum = busnum;
 
-	bus->dev = device_create(usb_host_class, bus->controller, MKDEV(0, 0),
-				 bus, "usb_host%d", busnum);
-	result = PTR_ERR(bus->dev);
-	if (IS_ERR(bus->dev))
-		goto error_create_class_dev;
-
 	/* Add it to the local list of buses */
 	list_add (&bus->bus_list, &usb_bus_list);
 	mutex_unlock(&usb_bus_list_lock);
@@ -834,8 +889,6 @@ static int usb_register_bus(struct usb_bus *bus)
 		  "number %d\n", bus->busnum);
 	return 0;
 
-error_create_class_dev:
-	clear_bit(busnum, busmap.busmap);
 error_find_busnum:
 	mutex_unlock(&usb_bus_list_lock);
 	return result;
@@ -865,8 +918,6 @@ static void usb_deregister_bus (struct usb_bus *bus)
 	usb_notify_remove_bus(bus);
 
 	clear_bit (bus->busnum, busmap.busmap);
-
-	device_unregister(bus->dev);
 }
 
 /**
@@ -1199,7 +1250,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 
 	/* Map the URB's buffers for DMA access.
 	 * Lower level HCD code should use *_dma exclusively,
-	 * unless it uses pio or talks to another transport.
+	 * unless it uses pio or talks to another transport,
+	 * or uses the provided scatter gather list for bulk.
 	 */
 	if (is_root_hub(urb->dev))
 		return 0;
@@ -1520,6 +1572,92 @@ rescan:
 	}
 }
 
+/* Check whether a new configuration or alt setting for an interface
+ * will exceed the bandwidth for the bus (or the host controller resources).
+ * Only pass in a non-NULL config or interface, not both!
+ * Passing NULL for both new_config and new_intf means the device will be
+ * de-configured by issuing a set configuration 0 command.
+ */
+int usb_hcd_check_bandwidth(struct usb_device *udev,
+		struct usb_host_config *new_config,
+		struct usb_interface *new_intf)
+{
+	int num_intfs, i, j;
+	struct usb_interface_cache *intf_cache;
+	struct usb_host_interface *alt = 0;
+	int ret = 0;
+	struct usb_hcd *hcd;
+	struct usb_host_endpoint *ep;
+
+	hcd = bus_to_hcd(udev->bus);
+	if (!hcd->driver->check_bandwidth)
+		return 0;
+
+	/* Configuration is being removed - set configuration 0 */
+	if (!new_config && !new_intf) {
+		for (i = 1; i < 16; ++i) {
+			ep = udev->ep_out[i];
+			if (ep)
+				hcd->driver->drop_endpoint(hcd, udev, ep);
+			ep = udev->ep_in[i];
+			if (ep)
+				hcd->driver->drop_endpoint(hcd, udev, ep);
+		}
+		hcd->driver->check_bandwidth(hcd, udev);
+		return 0;
+	}
+	/* Check if the HCD says there's enough bandwidth.  Enable all endpoints
+	 * each interface's alt setting 0 and ask the HCD to check the bandwidth
+	 * of the bus.  There will always be bandwidth for endpoint 0, so it's
+	 * ok to exclude it.
+	 */
+	if (new_config) {
+		num_intfs = new_config->desc.bNumInterfaces;
+		/* Remove endpoints (except endpoint 0, which is always on the
+		 * schedule) from the old config from the schedule
+		 */
+		for (i = 1; i < 16; ++i) {
+			ep = udev->ep_out[i];
+			if (ep) {
+				ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+				if (ret < 0)
+					goto reset;
+			}
+			ep = udev->ep_in[i];
+			if (ep) {
+				ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+				if (ret < 0)
+					goto reset;
+			}
+		}
+		for (i = 0; i < num_intfs; ++i) {
+
+			/* Dig the endpoints for alt setting 0 out of the
+			 * interface cache for this interface
+			 */
+			intf_cache = new_config->intf_cache[i];
+			for (j = 0; j < intf_cache->num_altsetting; j++) {
+				if (intf_cache->altsetting[j].desc.bAlternateSetting == 0)
+					alt = &intf_cache->altsetting[j];
+			}
+			if (!alt) {
+				printk(KERN_DEBUG "Did not find alt setting 0 for intf %d\n", i);
+				continue;
+			}
+			for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+				ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
+				if (ret < 0)
+					goto reset;
+			}
+		}
+	}
+	ret = hcd->driver->check_bandwidth(hcd, udev);
+reset:
+	if (ret < 0)
+		hcd->driver->reset_bandwidth(hcd, udev);
+	return ret;
+}
+
 /* Disables the endpoint: synchronizes with the hcd to make sure all
  * endpoint state is gone from hardware.  usb_hcd_flush_endpoint() must
  * have been called previously.  Use for set_configuration, set_interface,
@@ -1897,8 +2035,20 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		retval = -ENOMEM;
 		goto err_allocate_root_hub;
 	}
-	rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
-			USB_SPEED_FULL;
+
+	switch (hcd->driver->flags & HCD_MASK) {
+	case HCD_USB11:
+		rhdev->speed = USB_SPEED_FULL;
+		break;
+	case HCD_USB2:
+		rhdev->speed = USB_SPEED_HIGH;
+		break;
+	case HCD_USB3:
+		rhdev->speed = USB_SPEED_SUPER;
+		break;
+	default:
+		goto err_allocate_root_hub;
+	}
 	hcd->self.root_hub = rhdev;
 
 	/* wakeup flag init defaults to "everything works" for root hubs,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index e7d4479de41..d397ecfd5b1 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -173,6 +173,8 @@ struct hc_driver {
 #define	HCD_LOCAL_MEM	0x0002		/* HC needs local memory */
 #define	HCD_USB11	0x0010		/* USB 1.1 */
 #define	HCD_USB2	0x0020		/* USB 2.0 */
+#define	HCD_USB3	0x0040		/* USB 3.0 */
+#define	HCD_MASK	0x0070
 
 	/* called to init HCD and root hub */
 	int	(*reset) (struct usb_hcd *hcd);
@@ -182,10 +184,10 @@ struct hc_driver {
 	 * a whole, not just the root hub; they're for PCI bus glue.
 	 */
 	/* called after suspending the hub, before entering D3 etc */
-	int	(*pci_suspend) (struct usb_hcd *hcd, pm_message_t message);
+	int	(*pci_suspend)(struct usb_hcd *hcd);
 
 	/* called after entering D0 (etc), before resuming the hub */
-	int	(*pci_resume) (struct usb_hcd *hcd);
+	int	(*pci_resume)(struct usb_hcd *hcd, bool hibernated);
 
 	/* cleanly make HCD stop writing memory and doing I/O */
 	void	(*stop) (struct usb_hcd *hcd);
@@ -224,6 +226,43 @@ struct hc_driver {
 	void	(*relinquish_port)(struct usb_hcd *, int);
 		/* has a port been handed over to a companion? */
 	int	(*port_handed_over)(struct usb_hcd *, int);
+
+	/* xHCI specific functions */
+		/* Called by usb_alloc_dev to alloc HC device structures */
+	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);
+		/* Called by usb_release_dev to free HC device structures */
+	void	(*free_dev)(struct usb_hcd *, struct usb_device *);
+
+	/* Bandwidth computation functions */
+	/* Note that add_endpoint() can only be called once per endpoint before
+	 * check_bandwidth() or reset_bandwidth() must be called.
+	 * drop_endpoint() can only be called once per endpoint also.
+	 * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+	 * add the endpoint to the schedule with possibly new parameters denoted by a
+	 * different endpoint descriptor in usb_host_endpoint.
+	 * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+	 * not allowed.
+	 */
+		/* Allocate endpoint resources and add them to a new schedule */
+	int 	(*add_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
+		/* Drop an endpoint from a new schedule */
+	int 	(*drop_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
+		/* Check that a new hardware configuration, set using
+		 * endpoint_enable and endpoint_disable, does not exceed bus
+		 * bandwidth.  This must be called before any set configuration
+		 * or set interface requests are sent to the device.
+		 */
+	int	(*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+		/* Reset the device schedule to the last known good schedule,
+		 * which was set from a previous successful call to
+		 * check_bandwidth().  This reverts any add_endpoint() and
+		 * drop_endpoint() calls since that last successful call.
+		 * Used for when a check_bandwidth() call fails due to resource
+		 * or bandwidth constraints.
+		 */
+	void	(*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+		/* Returns the hardware-chosen device address */
+	int	(*address_device)(struct usb_hcd *, struct usb_device *udev);
 };
 
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
@@ -242,6 +281,9 @@ extern void usb_hcd_disable_endpoint(struct usb_device *udev,
 extern void usb_hcd_reset_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
+extern int usb_hcd_check_bandwidth(struct usb_device *udev,
+		struct usb_host_config *new_config,
+		struct usb_interface *new_intf);
 extern int usb_hcd_get_frame_number(struct usb_device *udev);
 
 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
@@ -261,14 +303,11 @@ struct pci_device_id;
 extern int usb_hcd_pci_probe(struct pci_dev *dev,
 				const struct pci_device_id *id);
 extern void usb_hcd_pci_remove(struct pci_dev *dev);
-
-#ifdef CONFIG_PM
-extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_resume(struct pci_dev *dev);
-#endif /* CONFIG_PM */
-
 extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
 
+#ifdef CONFIG_PM_SLEEP
+extern struct dev_pm_ops	usb_hcd_pci_pm_ops;
+#endif
 #endif /* CONFIG_PCI */
 
 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index be86ae3f408..2af3b4f0605 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -155,6 +155,8 @@ static inline char *portspeed(int portstatus)
     		return "480 Mb/s";
 	else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
 		return "1.5 Mb/s";
+	else if (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED))
+		return "5.0 Gb/s";
 	else
 		return "12 Mb/s";
 }
@@ -457,13 +459,13 @@ static void hub_tt_kevent (struct work_struct *work)
 
 	spin_lock_irqsave (&hub->tt.lock, flags);
 	while (--limit && !list_empty (&hub->tt.clear_list)) {
-		struct list_head	*temp;
+		struct list_head	*next;
 		struct usb_tt_clear	*clear;
 		struct usb_device	*hdev = hub->hdev;
 		int			status;
 
-		temp = hub->tt.clear_list.next;
-		clear = list_entry (temp, struct usb_tt_clear, clear_list);
+		next = hub->tt.clear_list.next;
+		clear = list_entry (next, struct usb_tt_clear, clear_list);
 		list_del (&clear->clear_list);
 
 		/* drop lock so HCD can concurrently report other TT errors */
@@ -951,6 +953,9 @@ static int hub_configure(struct usb_hub *hub,
 					ret);
 			hub->tt.hub = hdev;
 			break;
+		case 3:
+			/* USB 3.0 hubs don't have a TT */
+			break;
 		default:
 			dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
 				hdev->descriptor.bDeviceProtocol);
@@ -1323,6 +1328,11 @@ EXPORT_SYMBOL_GPL(usb_set_device_state);
  * 0 is reserved by USB for default address; (b) Linux's USB stack
  * uses always #1 for the root hub of the controller. So USB stack's
  * port #1, which is wusb virtual-port #0 has address #2.
+ *
+ * Devices connected under xHCI are not as simple.  The host controller
+ * supports virtualization, so the hardware assigns device addresses and
+ * the HCD must setup data structures before issuing a set address
+ * command to the hardware.
  */
 static void choose_address(struct usb_device *udev)
 {
@@ -1642,6 +1652,9 @@ int usb_new_device(struct usb_device *udev)
 	err = usb_configure_device(udev);	/* detect & probe dev/intfs */
 	if (err < 0)
 		goto fail;
+	dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
+			udev->devnum, udev->bus->busnum,
+			(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
 	/* export the usbdev device-node for libusb */
 	udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
 			(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
@@ -2395,19 +2408,29 @@ EXPORT_SYMBOL_GPL(usb_ep0_reinit);
 static int hub_set_address(struct usb_device *udev, int devnum)
 {
 	int retval;
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
 
-	if (devnum <= 1)
+	/*
+	 * The host controller will choose the device address,
+	 * instead of the core having chosen it earlier
+	 */
+	if (!hcd->driver->address_device && devnum <= 1)
 		return -EINVAL;
 	if (udev->state == USB_STATE_ADDRESS)
 		return 0;
 	if (udev->state != USB_STATE_DEFAULT)
 		return -EINVAL;
-	retval = usb_control_msg(udev, usb_sndaddr0pipe(),
-		USB_REQ_SET_ADDRESS, 0, devnum, 0,
-		NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (hcd->driver->address_device) {
+		retval = hcd->driver->address_device(hcd, udev);
+	} else {
+		retval = usb_control_msg(udev, usb_sndaddr0pipe(),
+				USB_REQ_SET_ADDRESS, 0, devnum, 0,
+				NULL, 0, USB_CTRL_SET_TIMEOUT);
+		if (retval == 0)
+			update_address(udev, devnum);
+	}
 	if (retval == 0) {
 		/* Device now using proper address. */
-		update_address(udev, devnum);
 		usb_set_device_state(udev, USB_STATE_ADDRESS);
 		usb_ep0_reinit(udev);
 	}
@@ -2430,6 +2453,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	static DEFINE_MUTEX(usb_address0_mutex);
 
 	struct usb_device	*hdev = hub->hdev;
+	struct usb_hcd		*hcd = bus_to_hcd(hdev->bus);
 	int			i, j, retval;
 	unsigned		delay = HUB_SHORT_RESET_TIME;
 	enum usb_device_speed	oldspeed = udev->speed;
@@ -2452,11 +2476,24 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 
 	mutex_lock(&usb_address0_mutex);
 
-	/* Reset the device; full speed may morph to high speed */
-	retval = hub_port_reset(hub, port1, udev, delay);
-	if (retval < 0)		/* error or disconnect */
+	if ((hcd->driver->flags & HCD_USB3) && udev->config) {
+		/* FIXME this will need special handling by the xHCI driver. */
+		dev_dbg(&udev->dev,
+				"xHCI reset of configured device "
+				"not supported yet.\n");
+		retval = -EINVAL;
 		goto fail;
-				/* success, speed is known */
+	} else if (!udev->config && oldspeed == USB_SPEED_SUPER) {
+		/* Don't reset USB 3.0 devices during an initial setup */
+		usb_set_device_state(udev, USB_STATE_DEFAULT);
+	} else {
+		/* Reset the device; full speed may morph to high speed */
+		/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+		retval = hub_port_reset(hub, port1, udev, delay);
+		if (retval < 0)		/* error or disconnect */
+			goto fail;
+		/* success, speed is known */
+	}
 	retval = -ENODEV;
 
 	if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
@@ -2471,6 +2508,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
 	 */
 	switch (udev->speed) {
+	case USB_SPEED_SUPER:
 	case USB_SPEED_VARIABLE:	/* fixed at 512 */
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
 		break;
@@ -2496,16 +2534,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	case USB_SPEED_LOW:	speed = "low";	break;
 	case USB_SPEED_FULL:	speed = "full";	break;
 	case USB_SPEED_HIGH:	speed = "high";	break;
+	case USB_SPEED_SUPER:
+				speed = "super";
+				break;
 	case USB_SPEED_VARIABLE:
 				speed = "variable";
 				type = "Wireless ";
 				break;
 	default: 		speed = "?";	break;
 	}
-	dev_info (&udev->dev,
-		  "%s %s speed %sUSB device using %s and address %d\n",
-		  (udev->config) ? "reset" : "new", speed, type,
-		  udev->bus->controller->driver->name, devnum);
+	if (udev->speed != USB_SPEED_SUPER)
+		dev_info(&udev->dev,
+				"%s %s speed %sUSB device using %s and address %d\n",
+				(udev->config) ? "reset" : "new", speed, type,
+				udev->bus->controller->driver->name, devnum);
 
 	/* Set up TT records, if needed  */
 	if (hdev->tt) {
@@ -2530,7 +2572,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 * value.
 	 */
 	for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
-		if (USE_NEW_SCHEME(retry_counter)) {
+		/*
+		 * An xHCI controller cannot send any packets to a device until
+		 * a set address command successfully completes.
+		 */
+		if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
 			struct usb_device_descriptor *buf;
 			int r = 0;
 
@@ -2596,7 +2642,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
  		 * unauthorized address in the Connect Ack sequence;
  		 * authorization will assign the final address.
  		 */
- 		if (udev->wusb == 0) {
+		if (udev->wusb == 0) {
 			for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
 				retval = hub_set_address(udev, devnum);
 				if (retval >= 0)
@@ -2609,13 +2655,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 					devnum, retval);
 				goto fail;
 			}
+			if (udev->speed == USB_SPEED_SUPER) {
+				devnum = udev->devnum;
+				dev_info(&udev->dev,
+						"%s SuperSpeed USB device using %s and address %d\n",
+						(udev->config) ? "reset" : "new",
+						udev->bus->controller->driver->name, devnum);
+			}
 
 			/* cope with hardware quirkiness:
 			 *  - let SET_ADDRESS settle, some device hardware wants it
 			 *  - read ep0 maxpacket even for high and low speed,
 			 */
 			msleep(10);
-			if (USE_NEW_SCHEME(retry_counter))
+			if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
 				break;
   		}
 
@@ -2634,8 +2687,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (retval)
 		goto fail;
 
-	i = udev->descriptor.bMaxPacketSize0 == 0xff?	/* wusb device? */
-	    512 : udev->descriptor.bMaxPacketSize0;
+	if (udev->descriptor.bMaxPacketSize0 == 0xff ||
+			udev->speed == USB_SPEED_SUPER)
+		i = 512;
+	else
+		i = udev->descriptor.bMaxPacketSize0;
 	if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
 		if (udev->speed != USB_SPEED_FULL ||
 				!(i == 8 || i == 16 || i == 32 || i == 64)) {
@@ -2847,19 +2903,41 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		}
 
 		usb_set_device_state(udev, USB_STATE_POWERED);
-		udev->speed = USB_SPEED_UNKNOWN;
  		udev->bus_mA = hub->mA_per_port;
 		udev->level = hdev->level + 1;
 		udev->wusb = hub_is_wusb(hub);
 
-		/* set the address */
-		choose_address(udev);
-		if (udev->devnum <= 0) {
-			status = -ENOTCONN;	/* Don't retry */
-			goto loop;
+		/*
+		 * USB 3.0 devices are reset automatically before the connect
+		 * port status change appears, and the root hub port status
+		 * shows the correct speed.  We also get port change
+		 * notifications for USB 3.0 devices from the USB 3.0 portion of
+		 * an external USB 3.0 hub, but this isn't handled correctly yet
+		 * FIXME.
+		 */
+
+		if (!(hcd->driver->flags & HCD_USB3))
+			udev->speed = USB_SPEED_UNKNOWN;
+		else if ((hdev->parent == NULL) &&
+				(portstatus & (1 << USB_PORT_FEAT_SUPERSPEED)))
+			udev->speed = USB_SPEED_SUPER;
+		else
+			udev->speed = USB_SPEED_UNKNOWN;
+
+		/*
+		 * xHCI needs to issue an address device command later
+		 * in the hub_port_init sequence for SS/HS/FS/LS devices.
+		 */
+		if (!(hcd->driver->flags & HCD_USB3)) {
+			/* set the address */
+			choose_address(udev);
+			if (udev->devnum <= 0) {
+				status = -ENOTCONN;	/* Don't retry */
+				goto loop;
+			}
 		}
 
-		/* reset and get descriptor */
+		/* reset (non-USB 3.0 devices) and get descriptor */
 		status = hub_port_init(hub, udev, port1, i);
 		if (status < 0)
 			goto loop;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 2a116ce53c9..889c0f32a40 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -47,7 +47,10 @@
 #define USB_PORT_FEAT_L1		5	/* L1 suspend */
 #define USB_PORT_FEAT_POWER		8
 #define USB_PORT_FEAT_LOWSPEED		9
+/* This value was never in Table 11-17 */
 #define USB_PORT_FEAT_HIGHSPEED		10
+/* This value is also fake */
+#define USB_PORT_FEAT_SUPERSPEED	11
 #define USB_PORT_FEAT_C_CONNECTION	16
 #define USB_PORT_FEAT_C_ENABLE		17
 #define USB_PORT_FEAT_C_SUSPEND		18
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b6262837765..2bed83caacb 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <linux/timer.h>
 #include <linux/ctype.h>
+#include <linux/nls.h>
 #include <linux/device.h>
 #include <linux/scatterlist.h>
 #include <linux/usb/quirks.h>
@@ -364,6 +365,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	int i;
 	int urb_flags;
 	int dma;
+	int use_sg;
 
 	if (!io || !dev || !sg
 			|| usb_pipecontrol(pipe)
@@ -391,7 +393,19 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	if (io->entries <= 0)
 		return io->entries;
 
-	io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
+	/* If we're running on an xHCI host controller, queue the whole scatter
+	 * gather list with one call to urb_enqueue().  This is only for bulk,
+	 * as that endpoint type does not care how the data gets broken up
+	 * across frames.
+	 */
+	if (usb_pipebulk(pipe) &&
+			bus_to_hcd(dev->bus)->driver->flags & HCD_USB3) {
+		io->urbs = kmalloc(sizeof *io->urbs, mem_flags);
+		use_sg = true;
+	} else {
+		io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
+		use_sg = false;
+	}
 	if (!io->urbs)
 		goto nomem;
 
@@ -401,62 +415,92 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	if (usb_pipein(pipe))
 		urb_flags |= URB_SHORT_NOT_OK;
 
-	for_each_sg(sg, sg, io->entries, i) {
-		unsigned len;
-
-		io->urbs[i] = usb_alloc_urb(0, mem_flags);
-		if (!io->urbs[i]) {
-			io->entries = i;
+	if (use_sg) {
+		io->urbs[0] = usb_alloc_urb(0, mem_flags);
+		if (!io->urbs[0]) {
+			io->entries = 0;
 			goto nomem;
 		}
 
-		io->urbs[i]->dev = NULL;
-		io->urbs[i]->pipe = pipe;
-		io->urbs[i]->interval = period;
-		io->urbs[i]->transfer_flags = urb_flags;
-
-		io->urbs[i]->complete = sg_complete;
-		io->urbs[i]->context = io;
-
-		/*
-		 * Some systems need to revert to PIO when DMA is temporarily
-		 * unavailable.  For their sakes, both transfer_buffer and
-		 * transfer_dma are set when possible.  However this can only
-		 * work on systems without:
-		 *
-		 *  - HIGHMEM, since DMA buffers located in high memory are
-		 *    not directly addressable by the CPU for PIO;
-		 *
-		 *  - IOMMU, since dma_map_sg() is allowed to use an IOMMU to
-		 *    make virtually discontiguous buffers be "dma-contiguous"
-		 *    so that PIO and DMA need diferent numbers of URBs.
-		 *
-		 * So when HIGHMEM or IOMMU are in use, transfer_buffer is NULL
-		 * to prevent stale pointers and to help spot bugs.
-		 */
-		if (dma) {
-			io->urbs[i]->transfer_dma = sg_dma_address(sg);
-			len = sg_dma_len(sg);
+		io->urbs[0]->dev = NULL;
+		io->urbs[0]->pipe = pipe;
+		io->urbs[0]->interval = period;
+		io->urbs[0]->transfer_flags = urb_flags;
+
+		io->urbs[0]->complete = sg_complete;
+		io->urbs[0]->context = io;
+		/* A length of zero means transfer the whole sg list */
+		io->urbs[0]->transfer_buffer_length = length;
+		if (length == 0) {
+			for_each_sg(sg, sg, io->entries, i) {
+				io->urbs[0]->transfer_buffer_length +=
+					sg_dma_len(sg);
+			}
+		}
+		io->urbs[0]->sg = io;
+		io->urbs[0]->num_sgs = io->entries;
+		io->entries = 1;
+	} else {
+		for_each_sg(sg, sg, io->entries, i) {
+			unsigned len;
+
+			io->urbs[i] = usb_alloc_urb(0, mem_flags);
+			if (!io->urbs[i]) {
+				io->entries = i;
+				goto nomem;
+			}
+
+			io->urbs[i]->dev = NULL;
+			io->urbs[i]->pipe = pipe;
+			io->urbs[i]->interval = period;
+			io->urbs[i]->transfer_flags = urb_flags;
+
+			io->urbs[i]->complete = sg_complete;
+			io->urbs[i]->context = io;
+
+			/*
+			 * Some systems need to revert to PIO when DMA is
+			 * temporarily unavailable.  For their sakes, both
+			 * transfer_buffer and transfer_dma are set when
+			 * possible.  However this can only work on systems
+			 * without:
+			 *
+			 *  - HIGHMEM, since DMA buffers located in high memory
+			 *    are not directly addressable by the CPU for PIO;
+			 *
+			 *  - IOMMU, since dma_map_sg() is allowed to use an
+			 *    IOMMU to make virtually discontiguous buffers be
+			 *    "dma-contiguous" so that PIO and DMA need diferent
+			 *    numbers of URBs.
+			 *
+			 * So when HIGHMEM or IOMMU are in use, transfer_buffer
+			 * is NULL to prevent stale pointers and to help spot
+			 * bugs.
+			 */
+			if (dma) {
+				io->urbs[i]->transfer_dma = sg_dma_address(sg);
+				len = sg_dma_len(sg);
 #if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
-			io->urbs[i]->transfer_buffer = NULL;
+				io->urbs[i]->transfer_buffer = NULL;
 #else
-			io->urbs[i]->transfer_buffer = sg_virt(sg);
+				io->urbs[i]->transfer_buffer = sg_virt(sg);
 #endif
-		} else {
-			/* hc may use _only_ transfer_buffer */
-			io->urbs[i]->transfer_buffer = sg_virt(sg);
-			len = sg->length;
-		}
+			} else {
+				/* hc may use _only_ transfer_buffer */
+				io->urbs[i]->transfer_buffer = sg_virt(sg);
+				len = sg->length;
+			}
 
-		if (length) {
-			len = min_t(unsigned, len, length);
-			length -= len;
-			if (length == 0)
-				io->entries = i + 1;
+			if (length) {
+				len = min_t(unsigned, len, length);
+				length -= len;
+				if (length == 0)
+					io->entries = i + 1;
+			}
+			io->urbs[i]->transfer_buffer_length = len;
 		}
-		io->urbs[i]->transfer_buffer_length = len;
+		io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
 	}
-	io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
 
 	/* transaction state */
 	io->count = io->entries;
@@ -509,6 +553,10 @@ EXPORT_SYMBOL_GPL(usb_sg_init);
  * could be transferred.  That capability is less useful for low or full
  * speed interrupt endpoints, which allow at most one packet per millisecond,
  * of at most 8 or 64 bytes (respectively).
+ *
+ * It is not necessary to call this function to reserve bandwidth for devices
+ * under an xHCI host controller, as the bandwidth is reserved when the
+ * configuration or interface alt setting is selected.
  */
 void usb_sg_wait(struct usb_sg_request *io)
 {
@@ -759,7 +807,7 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
 }
 
 /**
- * usb_string - returns ISO 8859-1 version of a string descriptor
+ * usb_string - returns UTF-8 version of a string descriptor
  * @dev: the device whose string descriptor is being retrieved
  * @index: the number of the descriptor
  * @buf: where to put the string
@@ -767,17 +815,10 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
  * Context: !in_interrupt ()
  *
  * This converts the UTF-16LE encoded strings returned by devices, from
- * usb_get_string_descriptor(), to null-terminated ISO-8859-1 encoded ones
- * that are more usable in most kernel contexts.  Note that all characters
- * in the chosen descriptor that can't be encoded using ISO-8859-1
- * are converted to the question mark ("?") character, and this function
+ * usb_get_string_descriptor(), to null-terminated UTF-8 encoded ones
+ * that are more usable in most kernel contexts.  Note that this function
  * chooses strings in the first language supported by the device.
  *
- * The ASCII (or, redundantly, "US-ASCII") character set is the seven-bit
- * subset of ISO 8859-1. ISO-8859-1 is the eight-bit subset of Unicode,
- * and is appropriate for use many uses of English and several other
- * Western European languages.  (But it doesn't include the "Euro" symbol.)
- *
  * This call is synchronous, and may not be used in an interrupt context.
  *
  * Returns length of the string (>= 0) or usb_control_msg status (< 0).
@@ -786,7 +827,6 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 {
 	unsigned char *tbuf;
 	int err;
-	unsigned int u, idx;
 
 	if (dev->state == USB_STATE_SUSPENDED)
 		return -EHOSTUNREACH;
@@ -821,16 +861,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 		goto errout;
 
 	size--;		/* leave room for trailing NULL char in output buffer */
-	for (idx = 0, u = 2; u < err; u += 2) {
-		if (idx >= size)
-			break;
-		if (tbuf[u+1])			/* high byte */
-			buf[idx++] = '?';  /* non ISO-8859-1 character */
-		else
-			buf[idx++] = tbuf[u];
-	}
-	buf[idx] = 0;
-	err = idx;
+	err = utf16s_to_utf8s((wchar_t *) &tbuf[2], (err - 2) / 2,
+			UTF16_LITTLE_ENDIAN, buf, size);
+	buf[err] = 0;
 
 	if (tbuf[1] != USB_DT_STRING)
 		dev_dbg(&dev->dev,
@@ -843,6 +876,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 }
 EXPORT_SYMBOL_GPL(usb_string);
 
+/* one UTF-8-encoded 16-bit character has at most three bytes */
+#define MAX_USB_STRING_SIZE (127 * 3 + 1)
+
 /**
  * usb_cache_string - read a string descriptor and cache it for later use
  * @udev: the device whose string descriptor is being read
@@ -860,9 +896,9 @@ char *usb_cache_string(struct usb_device *udev, int index)
 	if (index <= 0)
 		return NULL;
 
-	buf = kmalloc(256, GFP_KERNEL);
+	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
 	if (buf) {
-		len = usb_string(udev, index, buf, 256);
+		len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
 		if (len > 0) {
 			smallbuf = kmalloc(++len, GFP_KERNEL);
 			if (!smallbuf)
@@ -1664,6 +1700,21 @@ free_interfaces:
 	if (ret)
 		goto free_interfaces;
 
+	/* Make sure we have bandwidth (and available HCD resources) for this
+	 * configuration.  Remove endpoints from the schedule if we're dropping
+	 * this configuration to set configuration 0.  After this point, the
+	 * host controller will not allow submissions to dropped endpoints.  If
+	 * this call fails, the device state is unchanged.
+	 */
+	if (cp)
+		ret = usb_hcd_check_bandwidth(dev, cp, NULL);
+	else
+		ret = usb_hcd_check_bandwidth(dev, NULL, NULL);
+	if (ret < 0) {
+		usb_autosuspend_device(dev);
+		goto free_interfaces;
+	}
+
 	/* if it's already configured, clear out old state first.
 	 * getting rid of old interfaces means unbinding their drivers.
 	 */
@@ -1686,6 +1737,7 @@ free_interfaces:
 	dev->actconfig = cp;
 	if (!cp) {
 		usb_set_device_state(dev, USB_STATE_ADDRESS);
+		usb_hcd_check_bandwidth(dev, NULL, NULL);
 		usb_autosuspend_device(dev);
 		goto free_interfaces;
 	}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index c6678919792..b5c72e45894 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -552,8 +552,8 @@ static struct attribute *dev_string_attrs[] = {
 static mode_t dev_string_attrs_are_visible(struct kobject *kobj,
 		struct attribute *a, int n)
 {
-	struct usb_device *udev = to_usb_device(
-			container_of(kobj, struct device, kobj));
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct usb_device *udev = to_usb_device(dev);
 
 	if (a == &dev_attr_manufacturer.attr) {
 		if (udev->manufacturer == NULL)
@@ -585,8 +585,8 @@ static ssize_t
 read_descriptors(struct kobject *kobj, struct bin_attribute *attr,
 		char *buf, loff_t off, size_t count)
 {
-	struct usb_device *udev = to_usb_device(
-			container_of(kobj, struct device, kobj));
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct usb_device *udev = to_usb_device(dev);
 	size_t nleft = count;
 	size_t srclen, n;
 	int cfgno;
@@ -786,8 +786,8 @@ static struct attribute *intf_assoc_attrs[] = {
 static mode_t intf_assoc_attrs_are_visible(struct kobject *kobj,
 		struct attribute *a, int n)
 {
-	struct usb_interface *intf = to_usb_interface(
-			container_of(kobj, struct device, kobj));
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct usb_interface *intf = to_usb_interface(dev);
 
 	if (intf->intf_assoc == NULL)
 		return 0;
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 3376055f36e..0885d4abdc6 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -241,6 +241,12 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
  * If the USB subsystem can't allocate sufficient bandwidth to perform
  * the periodic request, submitting such a periodic request should fail.
  *
+ * For devices under xHCI, the bandwidth is reserved at configuration time, or
+ * when the alt setting is selected.  If there is not enough bus bandwidth, the
+ * configuration/alt setting request will fail.  Therefore, submissions to
+ * periodic endpoints on devices under xHCI should never fail due to bandwidth
+ * constraints.
+ *
  * Device drivers must explicitly request that repetition, by ensuring that
  * some URB is always on the endpoint's queue (except possibly for short
  * periods during completion callacks).  When there is no longer an urb
@@ -351,6 +357,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	if (xfertype == USB_ENDPOINT_XFER_ISOC) {
 		int	n, len;
 
+		/* FIXME SuperSpeed isoc endpoints have up to 16 bursts */
 		/* "high bandwidth" mode, 1-3 packets/uframe? */
 		if (dev->speed == USB_SPEED_HIGH) {
 			int	mult = 1 + ((max >> 11) & 0x03);
@@ -426,6 +433,11 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			return -EINVAL;
 		/* too big? */
 		switch (dev->speed) {
+		case USB_SPEED_SUPER:	/* units are 125us */
+			/* Handle up to 2^(16-1) microframes */
+			if (urb->interval > (1 << 15))
+				return -EINVAL;
+			max = 1 << 15;
 		case USB_SPEED_HIGH:	/* units are microframes */
 			/* NOTE usb handles 2^15 */
 			if (urb->interval > (1024 * 8))
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 7eee400d3e3..a26f73880c3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -34,6 +34,7 @@
 #include <linux/usb.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
+#include <linux/debugfs.h>
 
 #include <asm/io.h>
 #include <linux/scatterlist.h>
@@ -139,8 +140,7 @@ static int __find_interface(struct device *dev, void *data)
 	struct find_interface_arg *arg = data;
 	struct usb_interface *intf;
 
-	/* can't look at usb devices, only interfaces */
-	if (is_usb_device(dev))
+	if (!is_usb_interface(dev))
 		return 0;
 
 	intf = to_usb_interface(dev);
@@ -184,11 +184,16 @@ EXPORT_SYMBOL_GPL(usb_find_interface);
 static void usb_release_dev(struct device *dev)
 {
 	struct usb_device *udev;
+	struct usb_hcd *hcd;
 
 	udev = to_usb_device(dev);
+	hcd = bus_to_hcd(udev->bus);
 
 	usb_destroy_configuration(udev);
-	usb_put_hcd(bus_to_hcd(udev->bus));
+	/* Root hubs aren't real devices, so don't free HCD resources */
+	if (hcd->driver->free_dev && udev->parent)
+		hcd->driver->free_dev(hcd, udev);
+	usb_put_hcd(hcd);
 	kfree(udev->product);
 	kfree(udev->manufacturer);
 	kfree(udev->serial);
@@ -305,10 +310,21 @@ static struct dev_pm_ops usb_device_pm_ops = {
 
 #endif	/* CONFIG_PM */
 
+
+static char *usb_nodename(struct device *dev)
+{
+	struct usb_device *usb_dev;
+
+	usb_dev = to_usb_device(dev);
+	return kasprintf(GFP_KERNEL, "bus/usb/%03d/%03d",
+			 usb_dev->bus->busnum, usb_dev->devnum);
+}
+
 struct device_type usb_device_type = {
 	.name =		"usb_device",
 	.release =	usb_release_dev,
 	.uevent =	usb_dev_uevent,
+	.nodename = 	usb_nodename,
 	.pm =		&usb_device_pm_ops,
 };
 
@@ -348,6 +364,13 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 		kfree(dev);
 		return NULL;
 	}
+	/* Root hubs aren't true devices, so don't allocate HCD resources */
+	if (usb_hcd->driver->alloc_dev && parent &&
+		!usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
+		usb_put_hcd(bus_to_hcd(bus));
+		kfree(dev);
+		return NULL;
+	}
 
 	device_initialize(&dev->dev);
 	dev->dev.bus = &usb_bus_type;
@@ -375,18 +398,24 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	 */
 	if (unlikely(!parent)) {
 		dev->devpath[0] = '0';
+		dev->route = 0;
 
 		dev->dev.parent = bus->controller;
 		dev_set_name(&dev->dev, "usb%d", bus->busnum);
 		root_hub = 1;
 	} else {
 		/* match any labeling on the hubs; it's one-based */
-		if (parent->devpath[0] == '0')
+		if (parent->devpath[0] == '0') {
 			snprintf(dev->devpath, sizeof dev->devpath,
 				"%d", port1);
-		else
+			/* Root ports are not counted in route string */
+			dev->route = 0;
+		} else {
 			snprintf(dev->devpath, sizeof dev->devpath,
 				"%s.%d", parent->devpath, port1);
+			dev->route = parent->route +
+				(port1 << ((parent->level - 1)*4));
+		}
 
 		dev->dev.parent = &parent->dev;
 		dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
@@ -799,12 +828,12 @@ void usb_buffer_dmasync(struct urb *urb)
 		return;
 
 	if (controller->dma_mask) {
-		dma_sync_single(controller,
+		dma_sync_single_for_cpu(controller,
 			urb->transfer_dma, urb->transfer_buffer_length,
 			usb_pipein(urb->pipe)
 				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 		if (usb_pipecontrol(urb->pipe))
-			dma_sync_single(controller,
+			dma_sync_single_for_cpu(controller,
 					urb->setup_dma,
 					sizeof(struct usb_ctrlrequest),
 					DMA_TO_DEVICE);
@@ -922,8 +951,8 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
 			|| !controller->dma_mask)
 		return;
 
-	dma_sync_sg(controller, sg, n_hw_ents,
-			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+	dma_sync_sg_for_cpu(controller, sg, n_hw_ents,
+			    is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 }
 EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg);
 #endif
@@ -1001,6 +1030,35 @@ static struct notifier_block usb_bus_nb = {
 	.notifier_call = usb_bus_notify,
 };
 
+struct dentry *usb_debug_root;
+EXPORT_SYMBOL_GPL(usb_debug_root);
+
+struct dentry *usb_debug_devices;
+
+static int usb_debugfs_init(void)
+{
+	usb_debug_root = debugfs_create_dir("usb", NULL);
+	if (!usb_debug_root)
+		return -ENOENT;
+
+	usb_debug_devices = debugfs_create_file("devices", 0444,
+						usb_debug_root, NULL,
+						&usbfs_devices_fops);
+	if (!usb_debug_devices) {
+		debugfs_remove(usb_debug_root);
+		usb_debug_root = NULL;
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+static void usb_debugfs_cleanup(void)
+{
+	debugfs_remove(usb_debug_devices);
+	debugfs_remove(usb_debug_root);
+}
+
 /*
  * Init
  */
@@ -1012,6 +1070,10 @@ static int __init usb_init(void)
 		return 0;
 	}
 
+	retval = usb_debugfs_init();
+	if (retval)
+		goto out;
+
 	retval = ksuspend_usb_init();
 	if (retval)
 		goto out;
@@ -1021,9 +1083,6 @@ static int __init usb_init(void)
 	retval = bus_register_notifier(&usb_bus_type, &usb_bus_nb);
 	if (retval)
 		goto bus_notifier_failed;
-	retval = usb_host_init();
-	if (retval)
-		goto host_init_failed;
 	retval = usb_major_init();
 	if (retval)
 		goto major_init_failed;
@@ -1053,8 +1112,6 @@ usb_devio_init_failed:
 driver_register_failed:
 	usb_major_cleanup();
 major_init_failed:
-	usb_host_cleanup();
-host_init_failed:
 	bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
 bus_notifier_failed:
 	bus_unregister(&usb_bus_type);
@@ -1079,10 +1136,10 @@ static void __exit usb_exit(void)
 	usb_deregister(&usbfs_driver);
 	usb_devio_cleanup();
 	usb_hub_cleanup();
-	usb_host_cleanup();
 	bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
 	bus_unregister(&usb_bus_type);
 	ksuspend_usb_cleanup();
+	usb_debugfs_cleanup();
 }
 
 subsys_initcall(usb_init);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 79d8a9ea559..e2a8cfaade1 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -41,8 +41,6 @@ extern int  usb_hub_init(void);
 extern void usb_hub_cleanup(void);
 extern int usb_major_init(void);
 extern void usb_major_cleanup(void);
-extern int usb_host_init(void);
-extern void usb_host_cleanup(void);
 
 #ifdef	CONFIG_PM
 
@@ -106,6 +104,7 @@ extern struct workqueue_struct *ksuspend_usb_wq;
 extern struct bus_type usb_bus_type;
 extern struct device_type usb_device_type;
 extern struct device_type usb_if_device_type;
+extern struct device_type usb_ep_device_type;
 extern struct usb_device_driver usb_generic_driver;
 
 static inline int is_usb_device(const struct device *dev)
@@ -113,6 +112,16 @@ static inline int is_usb_device(const struct device *dev)
 	return dev->type == &usb_device_type;
 }
 
+static inline int is_usb_interface(const struct device *dev)
+{
+	return dev->type == &usb_if_device_type;
+}
+
+static inline int is_usb_endpoint(const struct device *dev)
+{
+	return dev->type == &usb_ep_device_type;
+}
+
 /* Do the same for device drivers and interface drivers. */
 
 static inline int is_usb_device_driver(struct device_driver *drv)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 080bb1e4b84..5d1ddf485d1 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -156,7 +156,7 @@ config USB_ATMEL_USBA
 
 config USB_GADGET_FSL_USB2
 	boolean "Freescale Highspeed USB DR Peripheral Controller"
-	depends on FSL_SOC
+	depends on FSL_SOC || ARCH_MXC
 	select USB_GADGET_DUALSPEED
 	help
 	   Some of Freescale PowerPC processors have a High Speed
@@ -253,7 +253,7 @@ config USB_PXA25X_SMALL
 
 config USB_GADGET_PXA27X
 	boolean "PXA 27x"
-	depends on ARCH_PXA && PXA27x
+	depends on ARCH_PXA && (PXA27x || PXA3xx)
 	select USB_OTG_UTILS
 	help
 	   Intel's PXA 27x series XScale ARM v5TE processors include
@@ -272,6 +272,20 @@ config USB_PXA27X
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_S3C_HSOTG
+	boolean "S3C HS/OtG USB Device controller"
+	depends on S3C_DEV_USB_HSOTG
+	select USB_GADGET_S3C_HSOTG_PIO
+	help
+	  The Samsung S3C64XX USB2.0 high-speed gadget controller
+	  integrated into the S3C64XX series SoC.
+
+config USB_S3C_HSOTG
+	tristate
+	depends on USB_GADGET_S3C_HSOTG
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_S3C2410
 	boolean "S3C2410 USB Device Controller"
 	depends on ARCH_S3C2410
@@ -460,6 +474,27 @@ config USB_GOKU
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_LANGWELL
+	boolean "Intel Langwell USB Device Controller"
+	depends on PCI
+	select USB_GADGET_DUALSPEED
+	help
+	   Intel Langwell USB Device Controller is a High-Speed USB
+	   On-The-Go device controller.
+
+	   The number of programmable endpoints is different through
+	   controller revision.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "langwell_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
+config USB_LANGWELL
+	tristate
+	depends on USB_GADGET_LANGWELL
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 
 #
 # LAST -- dummy/emulated controller
@@ -566,6 +601,20 @@ config USB_ZERO_HNPTEST
 	  the "B-Peripheral" role, that device will use HNP to let this
 	  one serve as the USB host instead (in the "B-Host" role).
 
+config USB_AUDIO
+	tristate "Audio Gadget (EXPERIMENTAL)"
+	depends on SND
+	help
+	  Gadget Audio is compatible with USB Audio Class specification 1.0.
+	  It will include at least one AudioControl interface, zero or more
+	  AudioStream interface and zero or more MIDIStream interface.
+
+	  Gadget Audio will use on-board ALSA (CONFIG_SND) audio card to
+	  playback or capture audio stream.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_audio".
+
 config USB_ETH
 	tristate "Ethernet Gadget (with CDC Ethernet support)"
 	depends on NET
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 39a51d746cb..e6017e6bf6d 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -18,14 +18,21 @@ obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
+fsl_usb2_udc-objs		:= fsl_udc_core.o
+ifeq ($(CONFIG_ARCH_MXC),y)
+fsl_usb2_udc-objs		+= fsl_mx3_udc.o
+endif
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
 obj-$(CONFIG_USB_CI13XXX)	+= ci13xxx_udc.o
+obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
+obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 
 #
 # USB gadget drivers
 #
 g_zero-objs			:= zero.o
+g_audio-objs			:= audio.o
 g_ether-objs			:= ether.o
 g_serial-objs			:= serial.o
 g_midi-objs			:= gmidi.o
@@ -35,6 +42,7 @@ g_printer-objs			:= printer.o
 g_cdc-objs			:= cdc2.o
 
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
+obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
 obj-$(CONFIG_USB_ETH)		+= g_ether.o
 obj-$(CONFIG_USB_GADGETFS)	+= gadgetfs.o
 obj-$(CONFIG_USB_FILE_STORAGE)	+= g_file_storage.o
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 0b2bb8f0706..72bae8f39d8 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -485,7 +485,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 		return -ESHUTDOWN;
 	}
 
-	tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	tmp = usb_endpoint_type(desc);
 	switch (tmp) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		DBG("only one control endpoint\n");
@@ -517,7 +517,7 @@ ok:
 	local_irq_save(flags);
 
 	/* initialize endpoint to match this descriptor */
-	ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
+	ep->is_in = usb_endpoint_dir_in(desc);
 	ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC);
 	ep->stopped = 0;
 	if (ep->is_in)
@@ -1574,7 +1574,7 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
-	udc->gadget.dev.driver_data = &driver->driver;
+	dev_set_drvdata(&udc->gadget.dev, &driver->driver);
 	udc->enabled = 1;
 	udc->selfpowered = 1;
 
@@ -1583,7 +1583,7 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver)
 		DBG("driver->bind() returned %d\n", retval);
 		udc->driver = NULL;
 		udc->gadget.dev.driver = NULL;
-		udc->gadget.dev.driver_data = NULL;
+		dev_set_drvdata(&udc->gadget.dev, NULL);
 		udc->enabled = 0;
 		udc->selfpowered = 0;
 		return retval;
@@ -1613,7 +1613,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 
 	driver->unbind(&udc->gadget);
 	udc->gadget.dev.driver = NULL;
-	udc->gadget.dev.driver_data = NULL;
+	dev_set_drvdata(&udc->gadget.dev, NULL);
 	udc->driver = NULL;
 
 	DBG("unbound from %s\n", driver->driver.name);
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 05c913cc365..4e970cf0e29 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -326,13 +326,7 @@ static int vbus_is_present(struct usba_udc *udc)
 	return 1;
 }
 
-#if defined(CONFIG_AVR32)
-
-static void toggle_bias(int is_on)
-{
-}
-
-#elif defined(CONFIG_ARCH_AT91)
+#if defined(CONFIG_ARCH_AT91SAM9RL)
 
 #include <mach/at91_pmc.h>
 
@@ -346,7 +340,13 @@ static void toggle_bias(int is_on)
 		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
 }
 
-#endif /* CONFIG_ARCH_AT91 */
+#else
+
+static void toggle_bias(int is_on)
+{
+}
+
+#endif /* CONFIG_ARCH_AT91SAM9RL */
 
 static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
 {
@@ -550,12 +550,12 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
 			ep->ep.name, ept_cfg, maxpacket);
 
-	if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+	if (usb_endpoint_dir_in(desc)) {
 		ep->is_in = 1;
 		ept_cfg |= USBA_EPT_DIR_IN;
 	}
 
-	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	switch (usb_endpoint_type(desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
 		ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
new file mode 100644
index 00000000000..94de7e86461
--- /dev/null
+++ b/drivers/usb/gadget/audio.c
@@ -0,0 +1,302 @@
+/*
+ * audio.c -- Audio gadget driver
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+
+#include "u_audio.h"
+
+#define DRIVER_DESC		"Linux USB Audio Gadget"
+#define DRIVER_VERSION		"Dec 18, 2008"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#include "u_audio.c"
+#include "f_audio.c"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID. */
+#define AUDIO_VENDOR_NUM		0x0525	/* NetChip */
+#define AUDIO_PRODUCT_NUM		0xa4a1	/* Linux-USB Audio Gadget */
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	.bcdUSB =		__constant_cpu_to_le16(0x200),
+
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id defaults change according to what configs
+	 * we support.  (As does bNumConfigurations.)  These values can
+	 * also be overridden by module parameters.
+	 */
+	.idVendor =		__constant_cpu_to_le16(AUDIO_VENDOR_NUM),
+	.idProduct =		__constant_cpu_to_le16(AUDIO_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+	.bLength =		sizeof otg_descriptor,
+	.bDescriptorType =	USB_DT_OTG,
+
+	/* REVISIT SRP-only hardware is possible, although
+	 * it would not be called "OTG" ...
+	 */
+	.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Handle USB audio endpoint set/get command in setup class request
+ */
+
+static int audio_set_endpoint_req(struct usb_configuration *c,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	int			value = -EOPNOTSUPP;
+	u16			ep = le16_to_cpu(ctrl->wIndex);
+	u16			len = le16_to_cpu(ctrl->wLength);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+			ctrl->bRequest, w_value, len, ep);
+
+	switch (ctrl->bRequest) {
+	case SET_CUR:
+		value = 0;
+		break;
+
+	case SET_MIN:
+		break;
+
+	case SET_MAX:
+		break;
+
+	case SET_RES:
+		break;
+
+	case SET_MEM:
+		break;
+
+	default:
+		break;
+	}
+
+	return value;
+}
+
+static int audio_get_endpoint_req(struct usb_configuration *c,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	int value = -EOPNOTSUPP;
+	u8 ep = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+	u16 len = le16_to_cpu(ctrl->wLength);
+	u16 w_value = le16_to_cpu(ctrl->wValue);
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, endpoint %d\n",
+			ctrl->bRequest, w_value, len, ep);
+
+	switch (ctrl->bRequest) {
+	case GET_CUR:
+	case GET_MIN:
+	case GET_MAX:
+	case GET_RES:
+		value = 3;
+		break;
+	case GET_MEM:
+		break;
+	default:
+		break;
+	}
+
+	return value;
+}
+
+static int
+audio_setup(struct usb_configuration *c, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_request *req = cdev->req;
+	int value = -EOPNOTSUPP;
+	u16 w_index = le16_to_cpu(ctrl->wIndex);
+	u16 w_value = le16_to_cpu(ctrl->wValue);
+	u16 w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything except
+	 * Audio class messages; interface activation uses set_alt().
+	 */
+	switch (ctrl->bRequestType) {
+	case USB_AUDIO_SET_ENDPOINT:
+		value = audio_set_endpoint_req(c, ctrl);
+		break;
+
+	case USB_AUDIO_GET_ENDPOINT:
+		value = audio_get_endpoint_req(c, ctrl);
+		break;
+
+	default:
+		ERROR(cdev, "Invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "Audio req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "Audio response on err %d\n", value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init audio_do_config(struct usb_configuration *c)
+{
+	/* FIXME alloc iConfiguration string, set it in c->strings */
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	audio_bind_config(c);
+
+	return 0;
+}
+
+static struct usb_configuration audio_config_driver = {
+	.label			= DRIVER_DESC,
+	.bind			= audio_do_config,
+	.setup			= audio_setup,
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init audio_bind(struct usb_composite_dev *cdev)
+{
+	int			gcnum;
+	int			status;
+
+	gcnum = usb_gadget_controller_number(cdev->gadget);
+	if (gcnum >= 0)
+		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+	else {
+		ERROR(cdev, "controller '%s' not recognized; trying %s\n",
+			cdev->gadget->name,
+			audio_config_driver.label);
+		device_desc.bcdDevice =
+			__constant_cpu_to_le16(0x0300 | 0x0099);
+	}
+
+	/* device descriptor strings: manufacturer, product */
+	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+		init_utsname()->sysname, init_utsname()->release,
+		cdev->gadget->name);
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+	device_desc.iManufacturer = status;
+
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+	device_desc.iProduct = status;
+
+	status = usb_add_config(cdev, &audio_config_driver);
+	if (status < 0)
+		goto fail;
+
+	INFO(cdev, "%s, version: %s\n", DRIVER_DESC, DRIVER_VERSION);
+	return 0;
+
+fail:
+	return status;
+}
+
+static int __exit audio_unbind(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
+
+static struct usb_composite_driver audio_driver = {
+	.name		= "g_audio",
+	.dev		= &device_desc,
+	.strings	= audio_strings,
+	.bind		= audio_bind,
+	.unbind		= __exit_p(audio_unbind),
+};
+
+static int __init init(void)
+{
+	return usb_composite_register(&audio_driver);
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+	usb_composite_unregister(&audio_driver);
+}
+module_exit(cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Bryan Wu <cooloney@kernel.org>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 38e531ecae4..c7cb87a6fee 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -1977,9 +1977,9 @@ static int ep_enable(struct usb_ep *ep,
 	if (!list_empty(&mEp->qh[mEp->dir].queue))
 		warn("enabling a non-empty endpoint!");
 
-	mEp->dir  = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? TX : RX;
-	mEp->num  =  desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	mEp->type =  desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
+	mEp->num  = usb_endpoint_num(desc);
+	mEp->type = usb_endpoint_type(desc);
 
 	mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize);
 
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
new file mode 100644
index 00000000000..66527ba2d2e
--- /dev/null
+++ b/drivers/usb/gadget/f_audio.c
@@ -0,0 +1,707 @@
+/*
+ * f_audio.c -- USB Audio class function driver
+  *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <asm/atomic.h>
+
+#include "u_audio.h"
+
+#define OUT_EP_MAX_PACKET_SIZE	200
+static int req_buf_size = OUT_EP_MAX_PACKET_SIZE;
+module_param(req_buf_size, int, S_IRUGO);
+MODULE_PARM_DESC(req_buf_size, "ISO OUT endpoint request buffer size");
+
+static int req_count = 256;
+module_param(req_count, int, S_IRUGO);
+MODULE_PARM_DESC(req_count, "ISO OUT endpoint request count");
+
+static int audio_buf_size = 48000;
+module_param(audio_buf_size, int, S_IRUGO);
+MODULE_PARM_DESC(audio_buf_size, "Audio buffer size");
+
+/*
+ * DESCRIPTORS ... most are static, but strings and full
+ * configuration descriptors are built on demand.
+ */
+
+/*
+ * We have two interfaces- AudioControl and AudioStreaming
+ * TODO: only supcard playback currently
+ */
+#define F_AUDIO_AC_INTERFACE	0
+#define F_AUDIO_AS_INTERFACE	1
+#define F_AUDIO_NUM_INTERFACES	2
+
+/* B.3.1  Standard AC Interface Descriptor */
+static struct usb_interface_descriptor ac_interface_desc __initdata = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
+};
+
+DECLARE_USB_AC_HEADER_DESCRIPTOR(2);
+
+#define USB_DT_AC_HEADER_LENGH	USB_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
+/* B.3.2  Class-Specific AC Interface Descriptor */
+static struct usb_ac_header_descriptor_2 ac_header_desc = {
+	.bLength =		USB_DT_AC_HEADER_LENGH,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	HEADER,
+	.bcdADC =		__constant_cpu_to_le16(0x0100),
+	.wTotalLength =		__constant_cpu_to_le16(USB_DT_AC_HEADER_LENGH),
+	.bInCollection =	F_AUDIO_NUM_INTERFACES,
+	.baInterfaceNr = {
+		[0] =		F_AUDIO_AC_INTERFACE,
+		[1] =		F_AUDIO_AS_INTERFACE,
+	}
+};
+
+#define INPUT_TERMINAL_ID	1
+static struct usb_input_terminal_descriptor input_terminal_desc = {
+	.bLength =		USB_DT_AC_INPUT_TERMINAL_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	INPUT_TERMINAL,
+	.bTerminalID =		INPUT_TERMINAL_ID,
+	.wTerminalType =	USB_AC_TERMINAL_STREAMING,
+	.bAssocTerminal =	0,
+	.wChannelConfig =	0x3,
+};
+
+DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(0);
+
+#define FEATURE_UNIT_ID		2
+static struct usb_ac_feature_unit_descriptor_0 feature_unit_desc = {
+	.bLength		= USB_DT_AC_FEATURE_UNIT_SIZE(0),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype	= FEATURE_UNIT,
+	.bUnitID		= FEATURE_UNIT_ID,
+	.bSourceID		= INPUT_TERMINAL_ID,
+	.bControlSize		= 2,
+	.bmaControls[0]		= (FU_MUTE | FU_VOLUME),
+};
+
+static struct usb_audio_control mute_control = {
+	.list = LIST_HEAD_INIT(mute_control.list),
+	.name = "Mute Control",
+	.type = MUTE_CONTROL,
+	/* Todo: add real Mute control code */
+	.set = generic_set_cmd,
+	.get = generic_get_cmd,
+};
+
+static struct usb_audio_control volume_control = {
+	.list = LIST_HEAD_INIT(volume_control.list),
+	.name = "Volume Control",
+	.type = VOLUME_CONTROL,
+	/* Todo: add real Volume control code */
+	.set = generic_set_cmd,
+	.get = generic_get_cmd,
+};
+
+static struct usb_audio_control_selector feature_unit = {
+	.list = LIST_HEAD_INIT(feature_unit.list),
+	.id = FEATURE_UNIT_ID,
+	.name = "Mute & Volume Control",
+	.type = FEATURE_UNIT,
+	.desc = (struct usb_descriptor_header *)&feature_unit_desc,
+};
+
+#define OUTPUT_TERMINAL_ID	3
+static struct usb_output_terminal_descriptor output_terminal_desc = {
+	.bLength		= USB_DT_AC_OUTPUT_TERMINAL_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype	= OUTPUT_TERMINAL,
+	.bTerminalID		= OUTPUT_TERMINAL_ID,
+	.wTerminalType		= USB_AC_OUTPUT_TERMINAL_SPEAKER,
+	.bAssocTerminal		= FEATURE_UNIT_ID,
+	.bSourceID		= FEATURE_UNIT_ID,
+};
+
+/* B.4.1  Standard AS Interface Descriptor */
+static struct usb_interface_descriptor as_interface_alt_0_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+static struct usb_interface_descriptor as_interface_alt_1_desc = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOSTREAMING,
+};
+
+/* B.4.2  Class-Specific AS Interface Descriptor */
+static struct usb_as_header_descriptor as_header_desc = {
+	.bLength =		USB_DT_AS_HEADER_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	AS_GENERAL,
+	.bTerminalLink =	INPUT_TERMINAL_ID,
+	.bDelay =		1,
+	.wFormatTag =		USB_AS_AUDIO_FORMAT_TYPE_I_PCM,
+};
+
+DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(1);
+
+static struct usb_as_formate_type_i_discrete_descriptor_1 as_type_i_desc = {
+	.bLength =		USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	FORMAT_TYPE,
+	.bFormatType =		USB_AS_FORMAT_TYPE_I,
+	.bSubframeSize =	2,
+	.bBitResolution =	16,
+	.bSamFreqType =		1,
+};
+
+/* Standard ISO OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor as_out_ep_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_AS_ENDPOINT_ADAPTIVE
+				| USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	__constant_cpu_to_le16(OUT_EP_MAX_PACKET_SIZE),
+	.bInterval =		4,
+};
+
+/* Class-specific AS ISO OUT Endpoint Descriptor */
+static struct usb_as_iso_endpoint_descriptor as_iso_out_desc __initdata = {
+	.bLength =		USB_AS_ISO_ENDPOINT_DESC_SIZE,
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	EP_GENERAL,
+	.bmAttributes = 	1,
+	.bLockDelayUnits =	1,
+	.wLockDelay =		__constant_cpu_to_le16(1),
+};
+
+static struct usb_descriptor_header *f_audio_desc[] __initdata = {
+	(struct usb_descriptor_header *)&ac_interface_desc,
+	(struct usb_descriptor_header *)&ac_header_desc,
+
+	(struct usb_descriptor_header *)&input_terminal_desc,
+	(struct usb_descriptor_header *)&output_terminal_desc,
+	(struct usb_descriptor_header *)&feature_unit_desc,
+
+	(struct usb_descriptor_header *)&as_interface_alt_0_desc,
+	(struct usb_descriptor_header *)&as_interface_alt_1_desc,
+	(struct usb_descriptor_header *)&as_header_desc,
+
+	(struct usb_descriptor_header *)&as_type_i_desc,
+
+	(struct usb_descriptor_header *)&as_out_ep_desc,
+	(struct usb_descriptor_header *)&as_iso_out_desc,
+	NULL,
+};
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s = manufacturer,
+	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *audio_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+/*
+ * This function is an ALSA sound card following USB Audio Class Spec 1.0.
+ */
+
+/*-------------------------------------------------------------------------*/
+struct f_audio_buf {
+	u8 *buf;
+	int actual;
+	struct list_head list;
+};
+
+static struct f_audio_buf *f_audio_buffer_alloc(int buf_size)
+{
+	struct f_audio_buf *copy_buf;
+
+	copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC);
+	if (!copy_buf)
+		return (struct f_audio_buf *)-ENOMEM;
+
+	copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC);
+	if (!copy_buf->buf) {
+		kfree(copy_buf);
+		return (struct f_audio_buf *)-ENOMEM;
+	}
+
+	return copy_buf;
+}
+
+static void f_audio_buffer_free(struct f_audio_buf *audio_buf)
+{
+	kfree(audio_buf->buf);
+	kfree(audio_buf);
+}
+/*-------------------------------------------------------------------------*/
+
+struct f_audio {
+	struct gaudio			card;
+
+	/* endpoints handle full and/or high speeds */
+	struct usb_ep			*out_ep;
+	struct usb_endpoint_descriptor	*out_desc;
+
+	spinlock_t			lock;
+	struct f_audio_buf *copy_buf;
+	struct work_struct playback_work;
+	struct list_head play_queue;
+
+	/* Control Set command */
+	struct list_head cs;
+	u8 set_cmd;
+	struct usb_audio_control *set_con;
+};
+
+static inline struct f_audio *func_to_audio(struct usb_function *f)
+{
+	return container_of(f, struct f_audio, card.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void f_audio_playback_work(struct work_struct *data)
+{
+	struct f_audio *audio = container_of(data, struct f_audio,
+					playback_work);
+	struct f_audio_buf *play_buf;
+
+	spin_lock_irq(&audio->lock);
+	if (list_empty(&audio->play_queue)) {
+		spin_unlock_irq(&audio->lock);
+		return;
+	}
+	play_buf = list_first_entry(&audio->play_queue,
+			struct f_audio_buf, list);
+	list_del(&play_buf->list);
+	spin_unlock_irq(&audio->lock);
+
+	u_audio_playback(&audio->card, play_buf->buf, play_buf->actual);
+	f_audio_buffer_free(play_buf);
+
+	return;
+}
+
+static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_audio *audio = req->context;
+	struct usb_composite_dev *cdev = audio->card.func.config->cdev;
+	struct f_audio_buf *copy_buf = audio->copy_buf;
+	int err;
+
+	if (!copy_buf)
+		return -EINVAL;
+
+	/* Copy buffer is full, add it to the play_queue */
+	if (audio_buf_size - copy_buf->actual < req->actual) {
+		list_add_tail(&copy_buf->list, &audio->play_queue);
+		schedule_work(&audio->playback_work);
+		copy_buf = f_audio_buffer_alloc(audio_buf_size);
+		if (copy_buf < 0)
+			return -ENOMEM;
+	}
+
+	memcpy(copy_buf->buf + copy_buf->actual, req->buf, req->actual);
+	copy_buf->actual += req->actual;
+	audio->copy_buf = copy_buf;
+
+	err = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (err)
+		ERROR(cdev, "%s queue req: %d\n", ep->name, err);
+
+	return 0;
+
+}
+
+static void f_audio_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_audio *audio = req->context;
+	int status = req->status;
+	u32 data = 0;
+	struct usb_ep *out_ep = audio->out_ep;
+
+	switch (status) {
+
+	case 0:				/* normal completion? */
+		if (ep == out_ep)
+			f_audio_out_ep_complete(ep, req);
+		else if (audio->set_con) {
+			memcpy(&data, req->buf, req->length);
+			audio->set_con->set(audio->set_con, audio->set_cmd,
+					le16_to_cpu(data));
+			audio->set_con = NULL;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static int audio_set_intf_req(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct f_audio		*audio = func_to_audio(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	u8			id = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+	u16			len = le16_to_cpu(ctrl->wLength);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u8			con_sel = (w_value >> 8) & 0xFF;
+	u8			cmd = (ctrl->bRequest & 0x0F);
+	struct usb_audio_control_selector *cs;
+	struct usb_audio_control *con;
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, entity %d\n",
+			ctrl->bRequest, w_value, len, id);
+
+	list_for_each_entry(cs, &audio->cs, list) {
+		if (cs->id == id) {
+			list_for_each_entry(con, &cs->control, list) {
+				if (con->type == con_sel) {
+					audio->set_con = con;
+					break;
+				}
+			}
+			break;
+		}
+	}
+
+	audio->set_cmd = cmd;
+	req->context = audio;
+	req->complete = f_audio_complete;
+
+	return len;
+}
+
+static int audio_get_intf_req(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct f_audio		*audio = func_to_audio(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u8			id = ((le16_to_cpu(ctrl->wIndex) >> 8) & 0xFF);
+	u16			len = le16_to_cpu(ctrl->wLength);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u8			con_sel = (w_value >> 8) & 0xFF;
+	u8			cmd = (ctrl->bRequest & 0x0F);
+	struct usb_audio_control_selector *cs;
+	struct usb_audio_control *con;
+
+	DBG(cdev, "bRequest 0x%x, w_value 0x%04x, len %d, entity %d\n",
+			ctrl->bRequest, w_value, len, id);
+
+	list_for_each_entry(cs, &audio->cs, list) {
+		if (cs->id == id) {
+			list_for_each_entry(con, &cs->control, list) {
+				if (con->type == con_sel && con->get) {
+					value = con->get(con, cmd);
+					break;
+				}
+			}
+			break;
+		}
+	}
+
+	req->context = audio;
+	req->complete = f_audio_complete;
+	memcpy(req->buf, &value, len);
+
+	return len;
+}
+
+static int
+f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/* composite driver infrastructure handles everything except
+	 * Audio class messages; interface activation uses set_alt().
+	 */
+	switch (ctrl->bRequestType) {
+	case USB_AUDIO_SET_INTF:
+		value = audio_set_intf_req(f, ctrl);
+		break;
+
+	case USB_AUDIO_GET_INTF:
+		value = audio_get_intf_req(f, ctrl);
+		break;
+
+	default:
+		ERROR(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "audio req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "audio response on err %d\n", value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_audio		*audio = func_to_audio(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_ep *out_ep = audio->out_ep;
+	struct usb_request *req;
+	int i = 0, err = 0;
+
+	DBG(cdev, "intf %d, alt %d\n", intf, alt);
+
+	if (intf == 1) {
+		if (alt == 1) {
+			usb_ep_enable(out_ep, audio->out_desc);
+			out_ep->driver_data = audio;
+			audio->copy_buf = f_audio_buffer_alloc(audio_buf_size);
+
+			/*
+			 * allocate a bunch of read buffers
+			 * and queue them all at once.
+			 */
+			for (i = 0; i < req_count && err == 0; i++) {
+				req = usb_ep_alloc_request(out_ep, GFP_ATOMIC);
+				if (req) {
+					req->buf = kzalloc(req_buf_size,
+							GFP_ATOMIC);
+					if (req->buf) {
+						req->length = req_buf_size;
+						req->context = audio;
+						req->complete =
+							f_audio_complete;
+						err = usb_ep_queue(out_ep,
+							req, GFP_ATOMIC);
+						if (err)
+							ERROR(cdev,
+							"%s queue req: %d\n",
+							out_ep->name, err);
+					} else
+						err = -ENOMEM;
+				} else
+					err = -ENOMEM;
+			}
+
+		} else {
+			struct f_audio_buf *copy_buf = audio->copy_buf;
+			if (copy_buf) {
+				list_add_tail(&copy_buf->list,
+						&audio->play_queue);
+				schedule_work(&audio->playback_work);
+			}
+		}
+	}
+
+	return err;
+}
+
+static void f_audio_disable(struct usb_function *f)
+{
+	return;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void f_audio_build_desc(struct f_audio *audio)
+{
+	struct gaudio *card = &audio->card;
+	u8 *sam_freq;
+	int rate;
+
+	/* Set channel numbers */
+	input_terminal_desc.bNrChannels = u_audio_get_playback_channels(card);
+	as_type_i_desc.bNrChannels = u_audio_get_playback_channels(card);
+
+	/* Set sample rates */
+	rate = u_audio_get_playback_rate(card);
+	sam_freq = as_type_i_desc.tSamFreq[0];
+	memcpy(sam_freq, &rate, 3);
+
+	/* Todo: Set Sample bits and other parameters */
+
+	return;
+}
+
+/* audio function driver setup/binding */
+static int __init
+f_audio_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_audio		*audio = func_to_audio(f);
+	int			status;
+	struct usb_ep		*ep;
+
+	f_audio_build_desc(audio);
+
+	/* allocate instance-specific interface IDs, and patch descriptors */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ac_interface_desc.bInterfaceNumber = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	as_interface_alt_0_desc.bInterfaceNumber = status;
+	as_interface_alt_1_desc.bInterfaceNumber = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &as_out_ep_desc);
+	if (!ep)
+		goto fail;
+	audio->out_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	status = -ENOMEM;
+
+	/* supcard all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+
+	/* copy descriptors, and track endpoint copies */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		c->highspeed = true;
+		f->hs_descriptors = usb_copy_descriptors(f_audio_desc);
+	} else
+		f->descriptors = usb_copy_descriptors(f_audio_desc);
+
+	return 0;
+
+fail:
+
+	return status;
+}
+
+static void
+f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_audio		*audio = func_to_audio(f);
+
+	usb_free_descriptors(f->descriptors);
+	kfree(audio);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Todo: add more control selecotor dynamically */
+int __init control_selector_init(struct f_audio *audio)
+{
+	INIT_LIST_HEAD(&audio->cs);
+	list_add(&feature_unit.list, &audio->cs);
+
+	INIT_LIST_HEAD(&feature_unit.control);
+	list_add(&mute_control.list, &feature_unit.control);
+	list_add(&volume_control.list, &feature_unit.control);
+
+	volume_control.data[_CUR] = 0xffc0;
+	volume_control.data[_MIN] = 0xe3a0;
+	volume_control.data[_MAX] = 0xfff0;
+	volume_control.data[_RES] = 0x0030;
+
+	return 0;
+}
+
+/**
+ * audio_bind_config - add USB audio fucntion to a configuration
+ * @c: the configuration to supcard the USB audio function
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ */
+int __init audio_bind_config(struct usb_configuration *c)
+{
+	struct f_audio *audio;
+	int status;
+
+	/* allocate and initialize one new instance */
+	audio = kzalloc(sizeof *audio, GFP_KERNEL);
+	if (!audio)
+		return -ENOMEM;
+
+	audio->card.func.name = "g_audio";
+	audio->card.gadget = c->cdev->gadget;
+
+	INIT_LIST_HEAD(&audio->play_queue);
+	spin_lock_init(&audio->lock);
+
+	/* set up ASLA audio devices */
+	status = gaudio_setup(&audio->card);
+	if (status < 0)
+		goto setup_fail;
+
+	audio->card.func.strings = audio_strings;
+	audio->card.func.bind = f_audio_bind;
+	audio->card.func.unbind = f_audio_unbind;
+	audio->card.func.set_alt = f_audio_set_alt;
+	audio->card.func.setup = f_audio_setup;
+	audio->card.func.disable = f_audio_disable;
+	audio->out_desc = &as_out_ep_desc;
+
+	control_selector_init(audio);
+
+	INIT_WORK(&audio->playback_work, f_audio_playback_work);
+
+	status = usb_add_function(c, &audio->card.func);
+	if (status)
+		goto add_fail;
+
+	INFO(c->cdev, "audio_buf_size %d, req_buf_size %d, req_count %d\n",
+		audio_buf_size, req_buf_size, req_count);
+
+	return status;
+
+add_fail:
+	gaudio_cleanup(&audio->card);
+setup_fail:
+	kfree(audio);
+	return status;
+}
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index c1abeb89b41..96fb118355b 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -188,8 +188,7 @@ static struct usb_descriptor_header *hs_pn_function[] = {
 
 static int pn_net_open(struct net_device *dev)
 {
-	if (netif_carrier_ok(dev))
-		netif_wake_queue(dev);
+	netif_wake_queue(dev);
 	return 0;
 }
 
@@ -219,8 +218,7 @@ static void pn_tx_complete(struct usb_ep *ep, struct usb_request *req)
 	}
 
 	dev_kfree_skb_any(skb);
-	if (netif_carrier_ok(dev))
-		netif_wake_queue(dev);
+	netif_wake_queue(dev);
 }
 
 static int pn_net_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -255,7 +253,7 @@ out_unlock:
 	spin_unlock_irqrestore(&port->lock, flags);
 out:
 	if (unlikely(skb)) {
-		dev_kfree_skb_any(skb);
+		dev_kfree_skb(skb);
 		dev->stats.tx_dropped++;
 	}
 	return 0;
@@ -383,7 +381,6 @@ static void __pn_reset(struct usb_function *f)
 	struct phonet_port *port = netdev_priv(dev);
 
 	netif_carrier_off(dev);
-	netif_stop_queue(dev);
 	port->usb = NULL;
 
 	usb_ep_disable(fp->out_ep);
@@ -427,8 +424,6 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			fp->in_ep->driver_data = fp;
 
 			netif_carrier_on(dev);
-			if (netif_running(dev))
-				netif_wake_queue(dev);
 			for (i = 0; i < phonet_rxq_size; i++)
 				pn_rx_submit(fp, fp->out_reqv[i], GFP_ATOMIC);
 		}
@@ -574,9 +569,10 @@ static struct net_device *dev;
 int __init phonet_bind_config(struct usb_configuration *c)
 {
 	struct f_phonet *fp;
-	int err;
+	int err, size;
 
-	fp = kzalloc(sizeof(*fp), GFP_KERNEL);
+	size = sizeof(*fp) + (phonet_rxq_size * sizeof(struct usb_request *));
+	fp = kzalloc(size, GFP_KERNEL);
 	if (!fp)
 		return -ENOMEM;
 
@@ -601,16 +597,13 @@ int __init gphonet_setup(struct usb_gadget *gadget)
 
 	/* Create net device */
 	BUG_ON(dev);
-	dev = alloc_netdev(sizeof(*port)
-		+ (phonet_rxq_size * sizeof(struct usb_request *)),
-				"upnlink%d", pn_net_setup);
+	dev = alloc_netdev(sizeof(*port), "upnlink%d", pn_net_setup);
 	if (!dev)
 		return -ENOMEM;
 
 	port = netdev_priv(dev);
 	spin_lock_init(&port->lock);
 	netif_carrier_off(dev);
-	netif_stop_queue(dev);
 	SET_NETDEV_DEV(dev, &gadget->dev);
 
 	err = register_netdev(dev);
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 3279a472604..424a37c5773 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -475,7 +475,9 @@ static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (rndis->port.in_ep->driver_data) {
 			DBG(cdev, "reset rndis\n");
 			gether_disconnect(&rndis->port);
-		} else {
+		}
+
+		if (!rndis->port.in) {
 			DBG(cdev, "init rndis\n");
 			rndis->port.in = ep_choose(cdev->gadget,
 					rndis->hs.in, rndis->fs.in);
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 381a53b3e11..1e6aa504d58 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -248,6 +248,8 @@
 #include <linux/freezer.h>
 #include <linux/utsname.h>
 
+#include <asm/unaligned.h>
+
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
@@ -799,29 +801,9 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
 
 /* Routines for unaligned data access */
 
-static u16 get_be16(u8 *buf)
-{
-	return ((u16) buf[0] << 8) | ((u16) buf[1]);
-}
-
-static u32 get_be32(u8 *buf)
-{
-	return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) |
-			((u32) buf[2] << 8) | ((u32) buf[3]);
-}
-
-static void put_be16(u8 *buf, u16 val)
-{
-	buf[0] = val >> 8;
-	buf[1] = val;
-}
-
-static void put_be32(u8 *buf, u32 val)
+static u32 get_unaligned_be24(u8 *buf)
 {
-	buf[0] = val >> 24;
-	buf[1] = val >> 16;
-	buf[2] = val >> 8;
-	buf[3] = val & 0xff;
+	return 0xffffff & (u32) get_unaligned_be32(buf - 1);
 }
 
 
@@ -1582,9 +1564,9 @@ static int do_read(struct fsg_dev *fsg)
 	/* Get the starting Logical Block Address and check that it's
 	 * not too big */
 	if (fsg->cmnd[0] == SC_READ_6)
-		lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+		lba = get_unaligned_be24(&fsg->cmnd[1]);
 	else {
-		lba = get_be32(&fsg->cmnd[2]);
+		lba = get_unaligned_be32(&fsg->cmnd[2]);
 
 		/* We allow DPO (Disable Page Out = don't save data in the
 		 * cache) and FUA (Force Unit Access = don't read from the
@@ -1717,9 +1699,9 @@ static int do_write(struct fsg_dev *fsg)
 	/* Get the starting Logical Block Address and check that it's
 	 * not too big */
 	if (fsg->cmnd[0] == SC_WRITE_6)
-		lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+		lba = get_unaligned_be24(&fsg->cmnd[1]);
 	else {
-		lba = get_be32(&fsg->cmnd[2]);
+		lba = get_unaligned_be32(&fsg->cmnd[2]);
 
 		/* We allow DPO (Disable Page Out = don't save data in the
 		 * cache) and FUA (Force Unit Access = write directly to the
@@ -1940,7 +1922,7 @@ static int do_verify(struct fsg_dev *fsg)
 
 	/* Get the starting Logical Block Address and check that it's
 	 * not too big */
-	lba = get_be32(&fsg->cmnd[2]);
+	lba = get_unaligned_be32(&fsg->cmnd[2]);
 	if (lba >= curlun->num_sectors) {
 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
 		return -EINVAL;
@@ -1953,7 +1935,7 @@ static int do_verify(struct fsg_dev *fsg)
 		return -EINVAL;
 	}
 
-	verification_length = get_be16(&fsg->cmnd[7]);
+	verification_length = get_unaligned_be16(&fsg->cmnd[7]);
 	if (unlikely(verification_length == 0))
 		return -EIO;		// No default reply
 
@@ -2103,7 +2085,7 @@ static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 	memset(buf, 0, 18);
 	buf[0] = valid | 0x70;			// Valid, current error
 	buf[2] = SK(sd);
-	put_be32(&buf[3], sdinfo);		// Sense information
+	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
 	buf[7] = 18 - 8;			// Additional sense length
 	buf[12] = ASC(sd);
 	buf[13] = ASCQ(sd);
@@ -2114,7 +2096,7 @@ static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 {
 	struct lun	*curlun = fsg->curlun;
-	u32		lba = get_be32(&fsg->cmnd[2]);
+	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
 	int		pmi = fsg->cmnd[8];
 	u8		*buf = (u8 *) bh->buf;
 
@@ -2124,8 +2106,9 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 		return -EINVAL;
 	}
 
-	put_be32(&buf[0], curlun->num_sectors - 1);	// Max logical block
-	put_be32(&buf[4], 512);				// Block length
+	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
+						/* Max logical block */
+	put_unaligned_be32(512, &buf[4]);	/* Block length */
 	return 8;
 }
 
@@ -2144,7 +2127,7 @@ static void store_cdrom_address(u8 *dest, int msf, u32 addr)
 		dest[0] = 0;		/* Reserved */
 	} else {
 		/* Absolute sector */
-		put_be32(dest, addr);
+		put_unaligned_be32(addr, dest);
 	}
 }
 
@@ -2152,7 +2135,7 @@ static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 {
 	struct lun	*curlun = fsg->curlun;
 	int		msf = fsg->cmnd[1] & 0x02;
-	u32		lba = get_be32(&fsg->cmnd[2]);
+	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
 	u8		*buf = (u8 *) bh->buf;
 
 	if ((fsg->cmnd[1] & ~0x02) != 0) {		/* Mask away MSF */
@@ -2252,10 +2235,13 @@ static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 			buf[2] = 0x04;	// Write cache enable,
 					// Read cache not disabled
 					// No cache retention priorities
-			put_be16(&buf[4], 0xffff);  // Don't disable prefetch
-					// Minimum prefetch = 0
-			put_be16(&buf[8], 0xffff);  // Maximum prefetch
-			put_be16(&buf[10], 0xffff); // Maximum prefetch ceiling
+			put_unaligned_be16(0xffff, &buf[4]);
+					/* Don't disable prefetch */
+					/* Minimum prefetch = 0 */
+			put_unaligned_be16(0xffff, &buf[8]);
+					/* Maximum prefetch */
+			put_unaligned_be16(0xffff, &buf[10]);
+					/* Maximum prefetch ceiling */
 		}
 		buf += 12;
 	}
@@ -2272,7 +2258,7 @@ static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 	if (mscmnd == SC_MODE_SENSE_6)
 		buf0[0] = len - 1;
 	else
-		put_be16(buf0, len - 2);
+		put_unaligned_be16(len - 2, buf0);
 	return len;
 }
 
@@ -2360,9 +2346,10 @@ static int do_read_format_capacities(struct fsg_dev *fsg,
 	buf[3] = 8;		// Only the Current/Maximum Capacity Descriptor
 	buf += 4;
 
-	put_be32(&buf[0], curlun->num_sectors);		// Number of blocks
-	put_be32(&buf[4], 512);				// Block length
-	buf[4] = 0x02;					// Current capacity
+	put_unaligned_be32(curlun->num_sectors, &buf[0]);
+						/* Number of blocks */
+	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	buf[4] = 0x02;				/* Current capacity */
 	return 12;
 }
 
@@ -2882,7 +2869,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		break;
 
 	case SC_MODE_SELECT_10:
-		fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
 		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
 				(1<<1) | (3<<7), 0,
 				"MODE SELECT(10)")) == 0)
@@ -2898,7 +2885,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		break;
 
 	case SC_MODE_SENSE_10:
-		fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
 		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
 				(1<<1) | (1<<2) | (3<<7), 0,
 				"MODE SENSE(10)")) == 0)
@@ -2923,7 +2910,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		break;
 
 	case SC_READ_10:
-		fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+		fsg->data_size_from_cmnd =
+				get_unaligned_be16(&fsg->cmnd[7]) << 9;
 		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
 				(1<<1) | (0xf<<2) | (3<<7), 1,
 				"READ(10)")) == 0)
@@ -2931,7 +2919,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		break;
 
 	case SC_READ_12:
-		fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+		fsg->data_size_from_cmnd =
+				get_unaligned_be32(&fsg->cmnd[6]) << 9;
 		if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
 				(1<<1) | (0xf<<2) | (0xf<<6), 1,
 				"READ(12)")) == 0)
@@ -2949,7 +2938,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 	case SC_READ_HEADER:
 		if (!mod_data.cdrom)
 			goto unknown_cmnd;
-		fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
 		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
 				(3<<7) | (0x1f<<1), 1,
 				"READ HEADER")) == 0)
@@ -2959,7 +2948,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 	case SC_READ_TOC:
 		if (!mod_data.cdrom)
 			goto unknown_cmnd;
-		fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
 		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
 				(7<<6) | (1<<1), 1,
 				"READ TOC")) == 0)
@@ -2967,7 +2956,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		break;
 
 	case SC_READ_FORMAT_CAPACITIES:
-		fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
 		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
 				(3<<7), 1,
 				"READ FORMAT CAPACITIES")) == 0)
@@ -3025,7 +3014,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		break;
 
 	case SC_WRITE_10:
-		fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+		fsg->data_size_from_cmnd =
+				get_unaligned_be16(&fsg->cmnd[7]) << 9;
 		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
 				(1<<1) | (0xf<<2) | (3<<7), 1,
 				"WRITE(10)")) == 0)
@@ -3033,7 +3023,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		break;
 
 	case SC_WRITE_12:
-		fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+		fsg->data_size_from_cmnd =
+				get_unaligned_be32(&fsg->cmnd[6]) << 9;
 		if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
 				(1<<1) | (0xf<<2) | (0xf<<6), 1,
 				"WRITE(12)")) == 0)
diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
new file mode 100644
index 00000000000..4bc2bf3d602
--- /dev/null
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Description:
+ * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
+ * driver to function correctly on these systems.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fsl_devices.h>
+#include <linux/platform_device.h>
+
+static struct clk *mxc_ahb_clk;
+static struct clk *mxc_usb_clk;
+
+int fsl_udc_clk_init(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata;
+	unsigned long freq;
+	int ret;
+
+	pdata = pdev->dev.platform_data;
+
+	mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+	if (IS_ERR(mxc_ahb_clk))
+		return PTR_ERR(mxc_ahb_clk);
+
+	ret = clk_enable(mxc_ahb_clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+		goto eenahb;
+	}
+
+	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
+	mxc_usb_clk = clk_get(&pdev->dev, "usb");
+	if (IS_ERR(mxc_usb_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
+		ret = PTR_ERR(mxc_usb_clk);
+		goto egusb;
+	}
+
+	freq = clk_get_rate(mxc_usb_clk);
+	if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
+	    (freq < 59999000 || freq > 60001000)) {
+		dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+		goto eclkrate;
+	}
+
+	ret = clk_enable(mxc_usb_clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
+		goto eenusb;
+	}
+
+	return 0;
+
+eenusb:
+eclkrate:
+	clk_put(mxc_usb_clk);
+	mxc_usb_clk = NULL;
+egusb:
+	clk_disable(mxc_ahb_clk);
+eenahb:
+	clk_put(mxc_ahb_clk);
+	return ret;
+}
+
+void fsl_udc_clk_finalize(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+	/* ULPI transceivers don't need usbpll */
+	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
+		clk_disable(mxc_usb_clk);
+		clk_put(mxc_usb_clk);
+		mxc_usb_clk = NULL;
+	}
+}
+
+void fsl_udc_clk_release(void)
+{
+	if (mxc_usb_clk) {
+		clk_disable(mxc_usb_clk);
+		clk_put(mxc_usb_clk);
+	}
+	clk_disable(mxc_ahb_clk);
+	clk_put(mxc_ahb_clk);
+}
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_udc_core.c
index 9d7b95d4e3d..42a74b8a0bb 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -38,6 +38,7 @@
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
 #include <linux/dmapool.h>
+#include <linux/delay.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -57,7 +58,9 @@ static const char driver_name[] = "fsl-usb2-udc";
 static const char driver_desc[] = DRIVER_DESC;
 
 static struct usb_dr_device *dr_regs;
+#ifndef CONFIG_ARCH_MXC
 static struct usb_sys_interface *usb_sys_regs;
+#endif
 
 /* it is initialized in probe()  */
 static struct fsl_udc *udc_controller = NULL;
@@ -174,10 +177,34 @@ static void nuke(struct fsl_ep *ep, int status)
 
 static int dr_controller_setup(struct fsl_udc *udc)
 {
-	unsigned int tmp = 0, portctrl = 0, ctrl = 0;
+	unsigned int tmp, portctrl;
+#ifndef CONFIG_ARCH_MXC
+	unsigned int ctrl;
+#endif
 	unsigned long timeout;
 #define FSL_UDC_RESET_TIMEOUT 1000
 
+	/* Config PHY interface */
+	portctrl = fsl_readl(&dr_regs->portsc1);
+	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
+	switch (udc->phy_mode) {
+	case FSL_USB2_PHY_ULPI:
+		portctrl |= PORTSCX_PTS_ULPI;
+		break;
+	case FSL_USB2_PHY_UTMI_WIDE:
+		portctrl |= PORTSCX_PTW_16BIT;
+		/* fall through */
+	case FSL_USB2_PHY_UTMI:
+		portctrl |= PORTSCX_PTS_UTMI;
+		break;
+	case FSL_USB2_PHY_SERIAL:
+		portctrl |= PORTSCX_PTS_FSLS;
+		break;
+	default:
+		return -EINVAL;
+	}
+	fsl_writel(portctrl, &dr_regs->portsc1);
+
 	/* Stop and reset the usb controller */
 	tmp = fsl_readl(&dr_regs->usbcmd);
 	tmp &= ~USB_CMD_RUN_STOP;
@@ -215,31 +242,12 @@ static int dr_controller_setup(struct fsl_udc *udc)
 		udc->ep_qh, (int)tmp,
 		fsl_readl(&dr_regs->endpointlistaddr));
 
-	/* Config PHY interface */
-	portctrl = fsl_readl(&dr_regs->portsc1);
-	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
-	switch (udc->phy_mode) {
-	case FSL_USB2_PHY_ULPI:
-		portctrl |= PORTSCX_PTS_ULPI;
-		break;
-	case FSL_USB2_PHY_UTMI_WIDE:
-		portctrl |= PORTSCX_PTW_16BIT;
-		/* fall through */
-	case FSL_USB2_PHY_UTMI:
-		portctrl |= PORTSCX_PTS_UTMI;
-		break;
-	case FSL_USB2_PHY_SERIAL:
-		portctrl |= PORTSCX_PTS_FSLS;
-		break;
-	default:
-		return -EINVAL;
-	}
-	fsl_writel(portctrl, &dr_regs->portsc1);
-
 	/* Config control enable i/o output, cpu endian register */
+#ifndef CONFIG_ARCH_MXC
 	ctrl = __raw_readl(&usb_sys_regs->control);
 	ctrl |= USB_CTRL_IOENB;
 	__raw_writel(ctrl, &usb_sys_regs->control);
+#endif
 
 #if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
 	/* Turn on cache snooping hardware, since some PowerPC platforms
@@ -2043,6 +2051,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 	size -= t;
 	next += t;
 
+#ifndef CONFIG_ARCH_MXC
 	tmp_reg = usb_sys_regs->snoop1;
 	t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
 	size -= t;
@@ -2053,6 +2062,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 			tmp_reg);
 	size -= t;
 	next += t;
+#endif
 
 	/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
 	ep = &udc->eps[0];
@@ -2263,14 +2273,21 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 		goto err_kfree;
 	}
 
-	dr_regs = ioremap(res->start, res->end - res->start + 1);
+	dr_regs = ioremap(res->start, resource_size(res));
 	if (!dr_regs) {
 		ret = -ENOMEM;
 		goto err_release_mem_region;
 	}
 
+#ifndef CONFIG_ARCH_MXC
 	usb_sys_regs = (struct usb_sys_interface *)
 			((u32)dr_regs + USB_DR_SYS_OFFSET);
+#endif
+
+	/* Initialize USB clocks */
+	ret = fsl_udc_clk_init(pdev);
+	if (ret < 0)
+		goto err_iounmap_noclk;
 
 	/* Read Device Controller Capability Parameters register */
 	dccparams = fsl_readl(&dr_regs->dccparams);
@@ -2308,6 +2325,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	 * leave usbintr reg untouched */
 	dr_controller_setup(udc_controller);
 
+	fsl_udc_clk_finalize(pdev);
+
 	/* Setup gadget structure */
 	udc_controller->gadget.ops = &fsl_gadget_ops;
 	udc_controller->gadget.is_dualspeed = 1;
@@ -2362,6 +2381,8 @@ err_unregister:
 err_free_irq:
 	free_irq(udc_controller->irq, udc_controller);
 err_iounmap:
+	fsl_udc_clk_release();
+err_iounmap_noclk:
 	iounmap(dr_regs);
 err_release_mem_region:
 	release_mem_region(res->start, res->end - res->start + 1);
@@ -2384,6 +2405,8 @@ static int __exit fsl_udc_remove(struct platform_device *pdev)
 		return -ENODEV;
 	udc_controller->done = &done;
 
+	fsl_udc_clk_release();
+
 	/* DR has been stopped in usb_gadget_unregister_driver() */
 	remove_proc_file();
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index e63ef12645f..20aeceed48c 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -563,4 +563,22 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
 					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
 #define get_pipe_by_ep(EP)	(ep_index(EP) * 2 + ep_is_in(EP))
 
+struct platform_device;
+#ifdef CONFIG_ARCH_MXC
+int fsl_udc_clk_init(struct platform_device *pdev);
+void fsl_udc_clk_finalize(struct platform_device *pdev);
+void fsl_udc_clk_release(void);
+#else
+static inline int fsl_udc_clk_init(struct platform_device *pdev)
+{
+	return 0;
+}
+static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+{
+}
+static inline void fsl_udc_clk_release(void)
+{
+}
+#endif
+
 #endif
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index ec6d439a2aa..8e0e9a0b736 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -137,6 +137,12 @@
 #define gadget_is_musbhdrc(g)	0
 #endif
 
+#ifdef CONFIG_USB_GADGET_LANGWELL
+#define gadget_is_langwell(g)	(!strcmp("langwell_udc", (g)->name))
+#else
+#define gadget_is_langwell(g)	0
+#endif
+
 /* from Montavista kernel (?) */
 #ifdef CONFIG_USB_GADGET_MPC8272
 #define gadget_is_mpc8272(g)	!strcmp("mpc8272_udc", (g)->name)
@@ -231,6 +237,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x22;
 	else if (gadget_is_ci13xxx(gadget))
 		return 0x23;
+	else if (gadget_is_langwell(gadget))
+		return 0x24;
 	return -ENOENT;
 }
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index de010c939db..112bb40a427 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -110,10 +110,10 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		return -EINVAL;
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
-	if (ep->num != (desc->bEndpointAddress & 0x0f))
+	if (ep->num != usb_endpoint_num(desc))
 		return -EINVAL;
 
-	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	switch (usb_endpoint_type(desc)) {
 	case USB_ENDPOINT_XFER_BULK:
 	case USB_ENDPOINT_XFER_INT:
 		break;
@@ -142,7 +142,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	/* ep1/ep2 dma direction is chosen early; it works in the other
 	 * direction, with pio.  be cautious with out-dma.
 	 */
-	ep->is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0;
+	ep->is_in = usb_endpoint_dir_in(desc);
 	if (ep->is_in) {
 		mode |= 1;
 		ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 168658b4b4e..c52a681f376 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -415,6 +415,13 @@ static int write_packet(struct imx_ep_struct *imx_ep, struct imx_request *req)
 	u8	*buf;
 	int	length, count, temp;
 
+	if (unlikely(__raw_readl(imx_ep->imx_usb->base +
+				 USB_EP_STAT(EP_NO(imx_ep))) & EPSTAT_ZLPS)) {
+		D_TRX(imx_ep->imx_usb->dev, "<%s> zlp still queued in EP %s\n",
+			__func__, imx_ep->ep.name);
+		return -1;
+	}
+
 	buf = req->req.buf + req->req.actual;
 	prefetch(buf);
 
@@ -734,9 +741,12 @@ static struct usb_request *imx_ep_alloc_request
 {
 	struct imx_request *req;
 
+	if (!usb_ep)
+		return NULL;
+
 	req = kzalloc(sizeof *req, gfp_flags);
-	if (!req || !usb_ep)
-		return 0;
+	if (!req)
+		return NULL;
 
 	INIT_LIST_HEAD(&req->queue);
 	req->in_use = 0;
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index d20937f28a1..7d33f50b587 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -384,9 +384,8 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 		return value;
 
 	/* halt any endpoint by doing a "wrong direction" i/o call */
-	if (data->desc.bEndpointAddress & USB_DIR_IN) {
-		if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-				== USB_ENDPOINT_XFER_ISOC)
+	if (usb_endpoint_dir_in(&data->desc)) {
+		if (usb_endpoint_xfer_isoc(&data->desc))
 			return -EINVAL;
 		DBG (data->dev, "%s halt\n", data->name);
 		spin_lock_irq (&data->dev->lock);
@@ -428,9 +427,8 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		return value;
 
 	/* halt any endpoint by doing a "wrong direction" i/o call */
-	if (!(data->desc.bEndpointAddress & USB_DIR_IN)) {
-		if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-				== USB_ENDPOINT_XFER_ISOC)
+	if (!usb_endpoint_dir_in(&data->desc)) {
+		if (usb_endpoint_xfer_isoc(&data->desc))
 			return -EINVAL;
 		DBG (data->dev, "%s halt\n", data->name);
 		spin_lock_irq (&data->dev->lock);
@@ -691,7 +689,7 @@ ep_aio_read(struct kiocb *iocb, const struct iovec *iov,
 	struct ep_data		*epdata = iocb->ki_filp->private_data;
 	char			*buf;
 
-	if (unlikely(epdata->desc.bEndpointAddress & USB_DIR_IN))
+	if (unlikely(usb_endpoint_dir_in(&epdata->desc)))
 		return -EINVAL;
 
 	buf = kmalloc(iocb->ki_left, GFP_KERNEL);
@@ -711,7 +709,7 @@ ep_aio_write(struct kiocb *iocb, const struct iovec *iov,
 	size_t			len = 0;
 	int			i = 0;
 
-	if (unlikely(!(epdata->desc.bEndpointAddress & USB_DIR_IN)))
+	if (unlikely(!usb_endpoint_dir_in(&epdata->desc)))
 		return -EINVAL;
 
 	buf = kmalloc(iocb->ki_left, GFP_KERNEL);
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
new file mode 100644
index 00000000000..6829d596135
--- /dev/null
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -0,0 +1,3373 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+
+/* #undef	DEBUG */
+/* #undef	VERBOSE */
+
+#if defined(CONFIG_USB_LANGWELL_OTG)
+#define	OTG_TRANSCEIVER
+#endif
+
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include "langwell_udc.h"
+
+
+#define	DRIVER_DESC		"Intel Langwell USB Device Controller driver"
+#define	DRIVER_VERSION		"16 May 2009"
+
+static const char driver_name[] = "langwell_udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+
+/* controller device global variable */
+static struct langwell_udc	*the_controller;
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor
+langwell_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	EP0_MAX_PKT_SIZE,
+};
+
+
+/*-------------------------------------------------------------------------*/
+/* debugging */
+
+#ifdef	DEBUG
+#define	DBG(dev, fmt, args...) \
+	pr_debug("%s %s: " fmt , driver_name, \
+			pci_name(dev->pdev), ## args)
+#else
+#define	DBG(dev, fmt, args...) \
+	do { } while (0)
+#endif /* DEBUG */
+
+
+#ifdef	VERBOSE
+#define	VDBG DBG
+#else
+#define	VDBG(dev, fmt, args...) \
+	do { } while (0)
+#endif	/* VERBOSE */
+
+
+#define	ERROR(dev, fmt, args...) \
+	pr_err("%s %s: " fmt , driver_name, \
+			pci_name(dev->pdev), ## args)
+
+#define	WARNING(dev, fmt, args...) \
+	pr_warning("%s %s: " fmt , driver_name, \
+			pci_name(dev->pdev), ## args)
+
+#define	INFO(dev, fmt, args...) \
+	pr_info("%s %s: " fmt , driver_name, \
+			pci_name(dev->pdev), ## args)
+
+
+#ifdef	VERBOSE
+static inline void print_all_registers(struct langwell_udc *dev)
+{
+	int	i;
+
+	/* Capability Registers */
+	printk(KERN_DEBUG "Capability Registers (offset: "
+			"0x%04x, length: 0x%08x)\n",
+			CAP_REG_OFFSET,
+			(u32)sizeof(struct langwell_cap_regs));
+	printk(KERN_DEBUG "caplength=0x%02x\n",
+			readb(&dev->cap_regs->caplength));
+	printk(KERN_DEBUG "hciversion=0x%04x\n",
+			readw(&dev->cap_regs->hciversion));
+	printk(KERN_DEBUG "hcsparams=0x%08x\n",
+			readl(&dev->cap_regs->hcsparams));
+	printk(KERN_DEBUG "hccparams=0x%08x\n",
+			readl(&dev->cap_regs->hccparams));
+	printk(KERN_DEBUG "dciversion=0x%04x\n",
+			readw(&dev->cap_regs->dciversion));
+	printk(KERN_DEBUG "dccparams=0x%08x\n",
+			readl(&dev->cap_regs->dccparams));
+
+	/* Operational Registers */
+	printk(KERN_DEBUG "Operational Registers (offset: "
+			"0x%04x, length: 0x%08x)\n",
+			OP_REG_OFFSET,
+			(u32)sizeof(struct langwell_op_regs));
+	printk(KERN_DEBUG "extsts=0x%08x\n",
+			readl(&dev->op_regs->extsts));
+	printk(KERN_DEBUG "extintr=0x%08x\n",
+			readl(&dev->op_regs->extintr));
+	printk(KERN_DEBUG "usbcmd=0x%08x\n",
+			readl(&dev->op_regs->usbcmd));
+	printk(KERN_DEBUG "usbsts=0x%08x\n",
+			readl(&dev->op_regs->usbsts));
+	printk(KERN_DEBUG "usbintr=0x%08x\n",
+			readl(&dev->op_regs->usbintr));
+	printk(KERN_DEBUG "frindex=0x%08x\n",
+			readl(&dev->op_regs->frindex));
+	printk(KERN_DEBUG "ctrldssegment=0x%08x\n",
+			readl(&dev->op_regs->ctrldssegment));
+	printk(KERN_DEBUG "deviceaddr=0x%08x\n",
+			readl(&dev->op_regs->deviceaddr));
+	printk(KERN_DEBUG "endpointlistaddr=0x%08x\n",
+			readl(&dev->op_regs->endpointlistaddr));
+	printk(KERN_DEBUG "ttctrl=0x%08x\n",
+			readl(&dev->op_regs->ttctrl));
+	printk(KERN_DEBUG "burstsize=0x%08x\n",
+			readl(&dev->op_regs->burstsize));
+	printk(KERN_DEBUG "txfilltuning=0x%08x\n",
+			readl(&dev->op_regs->txfilltuning));
+	printk(KERN_DEBUG "txttfilltuning=0x%08x\n",
+			readl(&dev->op_regs->txttfilltuning));
+	printk(KERN_DEBUG "ic_usb=0x%08x\n",
+			readl(&dev->op_regs->ic_usb));
+	printk(KERN_DEBUG "ulpi_viewport=0x%08x\n",
+			readl(&dev->op_regs->ulpi_viewport));
+	printk(KERN_DEBUG "configflag=0x%08x\n",
+			readl(&dev->op_regs->configflag));
+	printk(KERN_DEBUG "portsc1=0x%08x\n",
+			readl(&dev->op_regs->portsc1));
+	printk(KERN_DEBUG "devlc=0x%08x\n",
+			readl(&dev->op_regs->devlc));
+	printk(KERN_DEBUG "otgsc=0x%08x\n",
+			readl(&dev->op_regs->otgsc));
+	printk(KERN_DEBUG "usbmode=0x%08x\n",
+			readl(&dev->op_regs->usbmode));
+	printk(KERN_DEBUG "endptnak=0x%08x\n",
+			readl(&dev->op_regs->endptnak));
+	printk(KERN_DEBUG "endptnaken=0x%08x\n",
+			readl(&dev->op_regs->endptnaken));
+	printk(KERN_DEBUG "endptsetupstat=0x%08x\n",
+			readl(&dev->op_regs->endptsetupstat));
+	printk(KERN_DEBUG "endptprime=0x%08x\n",
+			readl(&dev->op_regs->endptprime));
+	printk(KERN_DEBUG "endptflush=0x%08x\n",
+			readl(&dev->op_regs->endptflush));
+	printk(KERN_DEBUG "endptstat=0x%08x\n",
+			readl(&dev->op_regs->endptstat));
+	printk(KERN_DEBUG "endptcomplete=0x%08x\n",
+			readl(&dev->op_regs->endptcomplete));
+
+	for (i = 0; i < dev->ep_max / 2; i++) {
+		printk(KERN_DEBUG "endptctrl[%d]=0x%08x\n",
+				i, readl(&dev->op_regs->endptctrl[i]));
+	}
+}
+#endif /* VERBOSE */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define	DIR_STRING(bAddress)	(((bAddress) & USB_DIR_IN) ? "in" : "out")
+
+#define is_in(ep)	(((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
+			USB_DIR_IN) : ((ep)->desc->bEndpointAddress \
+			& USB_DIR_IN) == USB_DIR_IN)
+
+
+#ifdef	DEBUG
+static char *type_string(u8 bmAttributes)
+{
+	switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		return "bulk";
+	case USB_ENDPOINT_XFER_ISOC:
+		return "iso";
+	case USB_ENDPOINT_XFER_INT:
+		return "int";
+	};
+
+	return "control";
+}
+#endif
+
+
+/* configure endpoint control registers */
+static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
+		unsigned char is_in, unsigned char ep_type)
+{
+	struct langwell_udc	*dev;
+	u32			endptctrl;
+
+	dev = ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+	if (is_in) {	/* TX */
+		if (ep_num)
+			endptctrl |= EPCTRL_TXR;
+		endptctrl |= EPCTRL_TXE;
+		endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
+	} else {	/* RX */
+		if (ep_num)
+			endptctrl |= EPCTRL_RXR;
+		endptctrl |= EPCTRL_RXE;
+		endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
+	}
+
+	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* reset ep0 dQH and endptctrl */
+static void ep0_reset(struct langwell_udc *dev)
+{
+	struct langwell_ep	*ep;
+	int			i;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* ep0 in and out */
+	for (i = 0; i < 2; i++) {
+		ep = &dev->ep[i];
+		ep->dev = dev;
+
+		/* ep0 dQH */
+		ep->dqh = &dev->ep_dqh[i];
+
+		/* configure ep0 endpoint capabilities in dQH */
+		ep->dqh->dqh_ios = 1;
+		ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
+
+		/* FIXME: enable ep0-in HW zero length termination select */
+		if (is_in(ep))
+			ep->dqh->dqh_zlt = 0;
+		ep->dqh->dqh_mult = 0;
+
+		/* configure ep0 control registers */
+		ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
+	}
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoints operations */
+
+/* configure endpoint, making it usable */
+static int langwell_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct langwell_udc	*dev;
+	struct langwell_ep	*ep;
+	u16			max = 0;
+	unsigned long		flags;
+	int			retval = 0;
+	unsigned char		zlt, ios = 0, mult = 0;
+
+	ep = container_of(_ep, struct langwell_ep, ep);
+	dev = ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (!_ep || !desc || ep->desc
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	max = le16_to_cpu(desc->wMaxPacketSize);
+
+	/*
+	 * disable HW zero length termination select
+	 * driver handles zero length packet through req->req.zero
+	 */
+	zlt = 1;
+
+	/*
+	 * sanity check type, direction, address, and then
+	 * initialize the endpoint capabilities fields in dQH
+	 */
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		ios = 1;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if ((dev->gadget.speed == USB_SPEED_HIGH
+					&& max != 512)
+				|| (dev->gadget.speed == USB_SPEED_FULL
+					&& max > 64)) {
+			goto done;
+		}
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
+			goto done;
+
+		switch (dev->gadget.speed) {
+		case USB_SPEED_HIGH:
+			if (max <= 1024)
+				break;
+		case USB_SPEED_FULL:
+			if (max <= 64)
+				break;
+		default:
+			if (max <= 8)
+				break;
+			goto done;
+		}
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (strstr(ep->ep.name, "-bulk")
+				|| strstr(ep->ep.name, "-int"))
+			goto done;
+
+		switch (dev->gadget.speed) {
+		case USB_SPEED_HIGH:
+			if (max <= 1024)
+				break;
+		case USB_SPEED_FULL:
+			if (max <= 1023)
+				break;
+		default:
+			goto done;
+		}
+		/*
+		 * FIXME:
+		 * calculate transactions needed for high bandwidth iso
+		 */
+		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
+		max = max & 0x8ff;	/* bit 0~10 */
+		/* 3 transactions at most */
+		if (mult > 3)
+			goto done;
+		break;
+	default:
+		goto done;
+	}
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* configure endpoint capabilities in dQH */
+	ep->dqh->dqh_ios = ios;
+	ep->dqh->dqh_mpl = cpu_to_le16(max);
+	ep->dqh->dqh_zlt = zlt;
+	ep->dqh->dqh_mult = mult;
+
+	ep->ep.maxpacket = max;
+	ep->desc = desc;
+	ep->stopped = 0;
+	ep->ep_num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+
+	/* ep_type */
+	ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* configure endpoint control registers */
+	ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
+
+	DBG(dev, "enabled %s (ep%d%s-%s), max %04x\n",
+			_ep->name,
+			ep->ep_num,
+			DIR_STRING(desc->bEndpointAddress),
+			type_string(desc->bmAttributes),
+			max);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+done:
+	VDBG(dev, "<--- %s()\n", __func__);
+	return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* retire a request */
+static void done(struct langwell_ep *ep, struct langwell_request *req,
+		int status)
+{
+	struct langwell_udc	*dev = ep->dev;
+	unsigned		stopped = ep->stopped;
+	struct langwell_dtd	*curr_dtd, *next_dtd;
+	int			i;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* remove the req from ep->queue */
+	list_del_init(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	/* free dTD for the request */
+	next_dtd = req->head;
+	for (i = 0; i < req->dtd_count; i++) {
+		curr_dtd = next_dtd;
+		if (i != req->dtd_count - 1)
+			next_dtd = curr_dtd->next_dtd_virt;
+		dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
+	}
+
+	if (req->mapped) {
+		dma_unmap_single(&dev->pdev->dev, req->req.dma, req->req.length,
+			is_in(ep) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	} else
+		dma_sync_single_for_cpu(&dev->pdev->dev, req->req.dma,
+				req->req.length,
+				is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	if (status != -ESHUTDOWN)
+		DBG(dev, "complete %s, req %p, stat %d, len %u/%u\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+
+	spin_unlock(&dev->lock);
+	/* complete routine from gadget driver */
+	if (req->req.complete)
+		req->req.complete(&ep->ep, &req->req);
+
+	spin_lock(&dev->lock);
+	ep->stopped = stopped;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+static void langwell_ep_fifo_flush(struct usb_ep *_ep);
+
+/* delete all endpoint requests, called with spinlock held */
+static void nuke(struct langwell_ep *ep, int status)
+{
+	/* called with spinlock held */
+	ep->stopped = 1;
+
+	/* endpoint fifo flush */
+	if (&ep->ep && ep->desc)
+		langwell_ep_fifo_flush(&ep->ep);
+
+	while (!list_empty(&ep->queue)) {
+		struct langwell_request	*req = NULL;
+		req = list_entry(ep->queue.next, struct langwell_request,
+				queue);
+		done(ep, req, status);
+	}
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint is no longer usable */
+static int langwell_ep_disable(struct usb_ep *_ep)
+{
+	struct langwell_ep	*ep;
+	unsigned long		flags;
+	struct langwell_udc	*dev;
+	int			ep_num;
+	u32			endptctrl;
+
+	ep = container_of(_ep, struct langwell_ep, ep);
+	dev = ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (!_ep || !ep->desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* disable endpoint control register */
+	ep_num = ep->ep_num;
+	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+	if (is_in(ep))
+		endptctrl &= ~EPCTRL_TXE;
+	else
+		endptctrl &= ~EPCTRL_RXE;
+	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+	/* nuke all pending requests (does flush) */
+	nuke(ep, -ESHUTDOWN);
+
+	ep->desc = NULL;
+	ep->stopped = 1;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	DBG(dev, "disabled %s\n", _ep->name);
+	VDBG(dev, "<--- %s()\n", __func__);
+
+	return 0;
+}
+
+
+/* allocate a request object to use with this endpoint */
+static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
+		gfp_t gfp_flags)
+{
+	struct langwell_ep	*ep;
+	struct langwell_udc	*dev;
+	struct langwell_request	*req = NULL;
+
+	if (!_ep)
+		return NULL;
+
+	ep = container_of(_ep, struct langwell_ep, ep);
+	dev = ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
+	VDBG(dev, "alloc request for %s\n", _ep->name);
+	VDBG(dev, "<--- %s()\n", __func__);
+	return &req->req;
+}
+
+
+/* free a request object */
+static void langwell_free_request(struct usb_ep *_ep,
+		struct usb_request *_req)
+{
+	struct langwell_ep	*ep;
+	struct langwell_udc	*dev;
+	struct langwell_request	*req = NULL;
+
+	ep = container_of(_ep, struct langwell_ep, ep);
+	dev = ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (!_ep || !_req)
+		return;
+
+	req = container_of(_req, struct langwell_request, req);
+	WARN_ON(!list_empty(&req->queue));
+
+	if (_req)
+		kfree(req);
+
+	VDBG(dev, "free request for %s\n", _ep->name);
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* queue dTD and PRIME endpoint */
+static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
+{
+	u32			bit_mask, usbcmd, endptstat, dtd_dma;
+	u8			dtd_status;
+	int			i;
+	struct langwell_dqh	*dqh;
+	struct langwell_udc	*dev;
+
+	dev = ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	i = ep->ep_num * 2 + is_in(ep);
+	dqh = &dev->ep_dqh[i];
+
+	if (ep->ep_num)
+		VDBG(dev, "%s\n", ep->name);
+	else
+		/* ep0 */
+		VDBG(dev, "%s-%s\n", ep->name, is_in(ep) ? "in" : "out");
+
+	VDBG(dev, "ep_dqh[%d] addr: 0x%08x\n", i, (u32)&(dev->ep_dqh[i]));
+
+	bit_mask = is_in(ep) ?
+		(1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
+
+	VDBG(dev, "bit_mask = 0x%08x\n", bit_mask);
+
+	/* check if the pipe is empty */
+	if (!(list_empty(&ep->queue))) {
+		/* add dTD to the end of linked list */
+		struct langwell_request	*lastreq;
+		lastreq = list_entry(ep->queue.prev,
+				struct langwell_request, queue);
+
+		lastreq->tail->dtd_next =
+			cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
+
+		/* read prime bit, if 1 goto out */
+		if (readl(&dev->op_regs->endptprime) & bit_mask)
+			goto out;
+
+		do {
+			/* set ATDTW bit in USBCMD */
+			usbcmd = readl(&dev->op_regs->usbcmd);
+			writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
+
+			/* read correct status bit */
+			endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
+
+		} while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
+
+		/* write ATDTW bit to 0 */
+		usbcmd = readl(&dev->op_regs->usbcmd);
+		writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
+
+		if (endptstat)
+			goto out;
+	}
+
+	/* write dQH next pointer and terminate bit to 0 */
+	dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
+	dqh->dtd_next = cpu_to_le32(dtd_dma);
+
+	/* clear active and halt bit */
+	dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
+	dqh->dtd_status &= dtd_status;
+	VDBG(dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
+
+	/* write 1 to endptprime register to PRIME endpoint */
+	bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
+	VDBG(dev, "endprime bit_mask = 0x%08x\n", bit_mask);
+	writel(bit_mask, &dev->op_regs->endptprime);
+out:
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* fill in the dTD structure to build a transfer descriptor */
+static struct langwell_dtd *build_dtd(struct langwell_request *req,
+		unsigned *length, dma_addr_t *dma, int *is_last)
+{
+	u32			 buf_ptr;
+	struct langwell_dtd	*dtd;
+	struct langwell_udc	*dev;
+	int			i;
+
+	dev = req->ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* the maximum transfer length, up to 16k bytes */
+	*length = min(req->req.length - req->req.actual,
+			(unsigned)DTD_MAX_TRANSFER_LENGTH);
+
+	/* create dTD dma_pool resource */
+	dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
+	if (dtd == NULL)
+		return dtd;
+	dtd->dtd_dma = *dma;
+
+	/* initialize buffer page pointers */
+	buf_ptr = (u32)(req->req.dma + req->req.actual);
+	for (i = 0; i < 5; i++)
+		dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
+
+	req->req.actual += *length;
+
+	/* fill in total bytes with transfer size */
+	dtd->dtd_total = cpu_to_le16(*length);
+	VDBG(dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
+
+	/* set is_last flag if req->req.zero is set or not */
+	if (req->req.zero) {
+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+			*is_last = 1;
+		else
+			*is_last = 0;
+	} else if (req->req.length == req->req.actual) {
+		*is_last = 1;
+	} else
+		*is_last = 0;
+
+	if (*is_last == 0)
+		VDBG(dev, "multi-dtd request!\n");
+
+	/* set interrupt on complete bit for the last dTD */
+	if (*is_last && !req->req.no_interrupt)
+		dtd->dtd_ioc = 1;
+
+	/* set multiplier override 0 for non-ISO and non-TX endpoint */
+	dtd->dtd_multo = 0;
+
+	/* set the active bit of status field to 1 */
+	dtd->dtd_status = DTD_STS_ACTIVE;
+	VDBG(dev, "dtd->dtd_status = 0x%02x\n", dtd->dtd_status);
+
+	VDBG(dev, "length = %d, dma addr= 0x%08x\n", *length, (int)*dma);
+	VDBG(dev, "<--- %s()\n", __func__);
+	return dtd;
+}
+
+
+/* generate dTD linked list for a request */
+static int req_to_dtd(struct langwell_request *req)
+{
+	unsigned		count;
+	int			is_last, is_first = 1;
+	struct langwell_dtd	*dtd, *last_dtd = NULL;
+	struct langwell_udc	*dev;
+	dma_addr_t		dma;
+
+	dev = req->ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+	do {
+		dtd = build_dtd(req, &count, &dma, &is_last);
+		if (dtd == NULL)
+			return -ENOMEM;
+
+		if (is_first) {
+			is_first = 0;
+			req->head = dtd;
+		} else {
+			last_dtd->dtd_next = cpu_to_le32(dma);
+			last_dtd->next_dtd_virt = dtd;
+		}
+		last_dtd = dtd;
+		req->dtd_count++;
+	} while (!is_last);
+
+	/* set terminate bit to 1 for the last dTD */
+	dtd->dtd_next = DTD_TERM;
+
+	req->tail = dtd;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* queue (submits) an I/O requests to an endpoint */
+static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+		gfp_t gfp_flags)
+{
+	struct langwell_request	*req;
+	struct langwell_ep	*ep;
+	struct langwell_udc	*dev;
+	unsigned long		flags;
+	int			is_iso = 0, zlflag = 0;
+
+	/* always require a cpu-view buffer */
+	req = container_of(_req, struct langwell_request, req);
+	ep = container_of(_ep, struct langwell_ep, ep);
+
+	if (!_req || !_req->complete || !_req->buf
+			|| !list_empty(&req->queue)) {
+		return -EINVAL;
+	}
+
+	if (unlikely(!_ep || !ep->desc))
+		return -EINVAL;
+
+	dev = ep->dev;
+	req->ep = ep;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		if (req->req.length > ep->ep.maxpacket)
+			return -EMSGSIZE;
+		is_iso = 1;
+	}
+
+	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+
+	/* set up dma mapping in case the caller didn't */
+	if (_req->dma == DMA_ADDR_INVALID) {
+		/* WORKAROUND: WARN_ON(size == 0) */
+		if (_req->length == 0) {
+			VDBG(dev, "req->length: 0->1\n");
+			zlflag = 1;
+			_req->length++;
+		}
+
+		_req->dma = dma_map_single(&dev->pdev->dev,
+				_req->buf, _req->length,
+				is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		if (zlflag && (_req->length == 1)) {
+			VDBG(dev, "req->length: 1->0\n");
+			zlflag = 0;
+			_req->length = 0;
+		}
+
+		req->mapped = 1;
+		VDBG(dev, "req->mapped = 1\n");
+	} else {
+		dma_sync_single_for_device(&dev->pdev->dev,
+				_req->dma, _req->length,
+				is_in(ep) ?  DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = 0;
+		VDBG(dev, "req->mapped = 0\n");
+	}
+
+	DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
+			_ep->name,
+			_req, _req->length, _req->buf, _req->dma);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+	req->dtd_count = 0;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* build and put dTDs to endpoint queue */
+	if (!req_to_dtd(req)) {
+		queue_dtd(ep, req);
+	} else {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -ENOMEM;
+	}
+
+	/* update ep0 state */
+	if (ep->ep_num == 0)
+		dev->ep0_state = DATA_STATE_XMIT;
+
+	if (likely(req != NULL)) {
+		list_add_tail(&req->queue, &ep->queue);
+		VDBG(dev, "list_add_tail() \n");
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* dequeue (cancels, unlinks) an I/O request from an endpoint */
+static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct langwell_ep	*ep;
+	struct langwell_udc	*dev;
+	struct langwell_request	*req;
+	unsigned long		flags;
+	int			stopped, ep_num, retval = 0;
+	u32			endptctrl;
+
+	ep = container_of(_ep, struct langwell_ep, ep);
+	dev = ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (!_ep || !ep->desc || !_req)
+		return -EINVAL;
+
+	if (!dev->driver)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	stopped = ep->stopped;
+
+	/* quiesce dma while we patch the queue */
+	ep->stopped = 1;
+	ep_num = ep->ep_num;
+
+	/* disable endpoint control register */
+	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+	if (is_in(ep))
+		endptctrl &= ~EPCTRL_TXE;
+	else
+		endptctrl &= ~EPCTRL_RXE;
+	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+
+	if (&req->req != _req) {
+		retval = -EINVAL;
+		goto done;
+	}
+
+	/* queue head may be partially complete. */
+	if (ep->queue.next == &req->queue) {
+		DBG(dev, "unlink (%s) dma\n", _ep->name);
+		_req->status = -ECONNRESET;
+		langwell_ep_fifo_flush(&ep->ep);
+
+		/* not the last request in endpoint queue */
+		if (likely(ep->queue.next == &req->queue)) {
+			struct langwell_dqh	*dqh;
+			struct langwell_request	*next_req;
+
+			dqh = ep->dqh;
+			next_req = list_entry(req->queue.next,
+					struct langwell_request, queue);
+
+			/* point the dQH to the first dTD of next request */
+			writel((u32) next_req->head, &dqh->dqh_current);
+		}
+	} else {
+		struct langwell_request	*prev_req;
+
+		prev_req = list_entry(req->queue.prev,
+				struct langwell_request, queue);
+		writel(readl(&req->tail->dtd_next),
+				&prev_req->tail->dtd_next);
+	}
+
+	done(ep, req, -ECONNRESET);
+
+done:
+	/* enable endpoint again */
+	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+	if (is_in(ep))
+		endptctrl |= EPCTRL_TXE;
+	else
+		endptctrl |= EPCTRL_RXE;
+	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+	ep->stopped = stopped;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint set/clear halt */
+static void ep_set_halt(struct langwell_ep *ep, int value)
+{
+	u32			endptctrl = 0;
+	int			ep_num;
+	struct langwell_udc	*dev = ep->dev;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	ep_num = ep->ep_num;
+	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
+
+	/* value: 1 - set halt, 0 - clear halt */
+	if (value) {
+		/* set the stall bit */
+		if (is_in(ep))
+			endptctrl |= EPCTRL_TXS;
+		else
+			endptctrl |= EPCTRL_RXS;
+	} else {
+		/* clear the stall bit and reset data toggle */
+		if (is_in(ep)) {
+			endptctrl &= ~EPCTRL_TXS;
+			endptctrl |= EPCTRL_TXR;
+		} else {
+			endptctrl &= ~EPCTRL_RXS;
+			endptctrl |= EPCTRL_RXR;
+		}
+	}
+
+	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* set the endpoint halt feature */
+static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct langwell_ep	*ep;
+	struct langwell_udc	*dev;
+	unsigned long		flags;
+	int			retval = 0;
+
+	ep = container_of(_ep, struct langwell_ep, ep);
+	dev = ep->dev;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (!_ep || !ep->desc)
+		return -EINVAL;
+
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	if (ep->desc && (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			== USB_ENDPOINT_XFER_ISOC)
+		return  -EOPNOTSUPP;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/*
+	 * attempt to halt IN ep will fail if any transfer requests
+	 * are still queue
+	 */
+	if (!list_empty(&ep->queue) && is_in(ep) && value) {
+		/* IN endpoint FIFO holds bytes */
+		DBG(dev, "%s FIFO holds bytes\n", _ep->name);
+		retval = -EAGAIN;
+		goto done;
+	}
+
+	/* endpoint set/clear halt */
+	if (ep->ep_num) {
+		ep_set_halt(ep, value);
+	} else { /* endpoint 0 */
+		dev->ep0_state = WAIT_FOR_SETUP;
+		dev->ep0_dir = USB_DIR_OUT;
+	}
+done:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	DBG(dev, "%s %s halt\n", _ep->name, value ? "set" : "clear");
+	VDBG(dev, "<--- %s()\n", __func__);
+	return retval;
+}
+
+
+/* set the halt feature and ignores clear requests */
+static int langwell_ep_set_wedge(struct usb_ep *_ep)
+{
+	struct langwell_ep	*ep;
+	struct langwell_udc	*dev;
+
+	ep = container_of(_ep, struct langwell_ep, ep);
+	dev = ep->dev;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (!_ep || !ep->desc)
+		return -EINVAL;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return usb_ep_set_halt(_ep);
+}
+
+
+/* flush contents of a fifo */
+static void langwell_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct langwell_ep	*ep;
+	struct langwell_udc	*dev;
+	u32			flush_bit;
+	unsigned long		timeout;
+
+	ep = container_of(_ep, struct langwell_ep, ep);
+	dev = ep->dev;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (!_ep || !ep->desc) {
+		VDBG(dev, "ep or ep->desc is NULL\n");
+		VDBG(dev, "<--- %s()\n", __func__);
+		return;
+	}
+
+	VDBG(dev, "%s-%s fifo flush\n", _ep->name, is_in(ep) ? "in" : "out");
+
+	/* flush endpoint buffer */
+	if (ep->ep_num == 0)
+		flush_bit = (1 << 16) | 1;
+	else if (is_in(ep))
+		flush_bit = 1 << (ep->ep_num + 16);	/* TX */
+	else
+		flush_bit = 1 << ep->ep_num;		/* RX */
+
+	/* wait until flush complete */
+	timeout = jiffies + FLUSH_TIMEOUT;
+	do {
+		writel(flush_bit, &dev->op_regs->endptflush);
+		while (readl(&dev->op_regs->endptflush)) {
+			if (time_after(jiffies, timeout)) {
+				ERROR(dev, "ep flush timeout\n");
+				goto done;
+			}
+			cpu_relax();
+		}
+	} while (readl(&dev->op_regs->endptstat) & flush_bit);
+done:
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* endpoints operations structure */
+static const struct usb_ep_ops langwell_ep_ops = {
+
+	/* configure endpoint, making it usable */
+	.enable		= langwell_ep_enable,
+
+	/* endpoint is no longer usable */
+	.disable	= langwell_ep_disable,
+
+	/* allocate a request object to use with this endpoint */
+	.alloc_request	= langwell_alloc_request,
+
+	/* free a request object */
+	.free_request	= langwell_free_request,
+
+	/* queue (submits) an I/O requests to an endpoint */
+	.queue		= langwell_ep_queue,
+
+	/* dequeue (cancels, unlinks) an I/O request from an endpoint */
+	.dequeue	= langwell_ep_dequeue,
+
+	/* set the endpoint halt feature */
+	.set_halt	= langwell_ep_set_halt,
+
+	/* set the halt feature and ignores clear requests */
+	.set_wedge	= langwell_ep_set_wedge,
+
+	/* flush contents of a fifo */
+	.fifo_flush	= langwell_ep_fifo_flush,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device controller usb_gadget_ops structure */
+
+/* returns the current frame number */
+static int langwell_get_frame(struct usb_gadget *_gadget)
+{
+	struct langwell_udc	*dev;
+	u16			retval;
+
+	if (!_gadget)
+		return -ENODEV;
+
+	dev = container_of(_gadget, struct langwell_udc, gadget);
+	VDBG(dev, "---> %s()\n", __func__);
+
+	retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return retval;
+}
+
+
+/* tries to wake up the host connected to this gadget */
+static int langwell_wakeup(struct usb_gadget *_gadget)
+{
+	struct langwell_udc	*dev;
+	u32 			portsc1, devlc;
+	unsigned long   	flags;
+
+	if (!_gadget)
+		return 0;
+
+	dev = container_of(_gadget, struct langwell_udc, gadget);
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* Remote Wakeup feature not enabled by host */
+	if (!dev->remote_wakeup)
+		return -ENOTSUPP;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	portsc1 = readl(&dev->op_regs->portsc1);
+	if (!(portsc1 & PORTS_SUSP)) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return 0;
+	}
+
+	/* LPM L1 to L0, remote wakeup */
+	if (dev->lpm && dev->lpm_state == LPM_L1) {
+		portsc1 |= PORTS_SLP;
+		writel(portsc1, &dev->op_regs->portsc1);
+	}
+
+	/* force port resume */
+	if (dev->usb_state == USB_STATE_SUSPENDED) {
+		portsc1 |= PORTS_FPR;
+		writel(portsc1, &dev->op_regs->portsc1);
+	}
+
+	/* exit PHY low power suspend */
+	devlc = readl(&dev->op_regs->devlc);
+	VDBG(dev, "devlc = 0x%08x\n", devlc);
+	devlc &= ~LPM_PHCD;
+	writel(devlc, &dev->op_regs->devlc);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* notify controller that VBUS is powered or not */
+static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct langwell_udc	*dev;
+	unsigned long		flags;
+	u32             	usbcmd;
+
+	if (!_gadget)
+		return -ENODEV;
+
+	dev = container_of(_gadget, struct langwell_udc, gadget);
+	VDBG(dev, "---> %s()\n", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	VDBG(dev, "VBUS status: %s\n", is_active ? "on" : "off");
+
+	dev->vbus_active = (is_active != 0);
+	if (dev->driver && dev->softconnected && dev->vbus_active) {
+		usbcmd = readl(&dev->op_regs->usbcmd);
+		usbcmd |= CMD_RUNSTOP;
+		writel(usbcmd, &dev->op_regs->usbcmd);
+	} else {
+		usbcmd = readl(&dev->op_regs->usbcmd);
+		usbcmd &= ~CMD_RUNSTOP;
+		writel(usbcmd, &dev->op_regs->usbcmd);
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* constrain controller's VBUS power usage */
+static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+	struct langwell_udc	*dev;
+
+	if (!_gadget)
+		return -ENODEV;
+
+	dev = container_of(_gadget, struct langwell_udc, gadget);
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (dev->transceiver) {
+		VDBG(dev, "otg_set_power\n");
+		VDBG(dev, "<--- %s()\n", __func__);
+		return otg_set_power(dev->transceiver, mA);
+	}
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return -ENOTSUPP;
+}
+
+
+/* D+ pullup, software-controlled connect/disconnect to USB host */
+static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
+{
+	struct langwell_udc	*dev;
+	u32             	usbcmd;
+	unsigned long   	flags;
+
+	if (!_gadget)
+		return -ENODEV;
+
+	dev = container_of(_gadget, struct langwell_udc, gadget);
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->softconnected = (is_on != 0);
+
+	if (dev->driver && dev->softconnected && dev->vbus_active) {
+		usbcmd = readl(&dev->op_regs->usbcmd);
+		usbcmd |= CMD_RUNSTOP;
+		writel(usbcmd, &dev->op_regs->usbcmd);
+	} else {
+		usbcmd = readl(&dev->op_regs->usbcmd);
+		usbcmd &= ~CMD_RUNSTOP;
+		writel(usbcmd, &dev->op_regs->usbcmd);
+	}
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops langwell_ops = {
+
+	/* returns the current frame number */
+	.get_frame	= langwell_get_frame,
+
+	/* tries to wake up the host connected to this gadget */
+	.wakeup		= langwell_wakeup,
+
+	/* set the device selfpowered feature, always selfpowered */
+	/* .set_selfpowered = langwell_set_selfpowered, */
+
+	/* notify controller that VBUS is powered or not */
+	.vbus_session	= langwell_vbus_session,
+
+	/* constrain controller's VBUS power usage */
+	.vbus_draw	= langwell_vbus_draw,
+
+	/* D+ pullup, software-controlled connect/disconnect to USB host */
+	.pullup		= langwell_pullup,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device controller operations */
+
+/* reset device controller */
+static int langwell_udc_reset(struct langwell_udc *dev)
+{
+	u32		usbcmd, usbmode, devlc, endpointlistaddr;
+	unsigned long	timeout;
+
+	if (!dev)
+		return -EINVAL;
+
+	DBG(dev, "---> %s()\n", __func__);
+
+	/* set controller to stop state */
+	usbcmd = readl(&dev->op_regs->usbcmd);
+	usbcmd &= ~CMD_RUNSTOP;
+	writel(usbcmd, &dev->op_regs->usbcmd);
+
+	/* reset device controller */
+	usbcmd = readl(&dev->op_regs->usbcmd);
+	usbcmd |= CMD_RST;
+	writel(usbcmd, &dev->op_regs->usbcmd);
+
+	/* wait for reset to complete */
+	timeout = jiffies + RESET_TIMEOUT;
+	while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
+		if (time_after(jiffies, timeout)) {
+			ERROR(dev, "device reset timeout\n");
+			return -ETIMEDOUT;
+		}
+		cpu_relax();
+	}
+
+	/* set controller to device mode */
+	usbmode = readl(&dev->op_regs->usbmode);
+	usbmode |= MODE_DEVICE;
+
+	/* turn setup lockout off, require setup tripwire in usbcmd */
+	usbmode |= MODE_SLOM;
+
+	writel(usbmode, &dev->op_regs->usbmode);
+	usbmode = readl(&dev->op_regs->usbmode);
+	VDBG(dev, "usbmode=0x%08x\n", usbmode);
+
+	/* Write-Clear setup status */
+	writel(0, &dev->op_regs->usbsts);
+
+	/* if support USB LPM, ACK all LPM token */
+	if (dev->lpm) {
+		devlc = readl(&dev->op_regs->devlc);
+		devlc &= ~LPM_STL;	/* don't STALL LPM token */
+		devlc &= ~LPM_NYT_ACK;	/* ACK LPM token */
+		writel(devlc, &dev->op_regs->devlc);
+	}
+
+	/* fill endpointlistaddr register */
+	endpointlistaddr = dev->ep_dqh_dma;
+	endpointlistaddr &= ENDPOINTLISTADDR_MASK;
+	writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
+
+	VDBG(dev, "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
+			dev->ep_dqh, endpointlistaddr,
+			readl(&dev->op_regs->endpointlistaddr));
+	DBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* reinitialize device controller endpoints */
+static int eps_reinit(struct langwell_udc *dev)
+{
+	struct langwell_ep	*ep;
+	char			name[14];
+	int			i;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* initialize ep0 */
+	ep = &dev->ep[0];
+	ep->dev = dev;
+	strncpy(ep->name, "ep0", sizeof(ep->name));
+	ep->ep.name = ep->name;
+	ep->ep.ops = &langwell_ep_ops;
+	ep->stopped = 0;
+	ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
+	ep->ep_num = 0;
+	ep->desc = &langwell_ep0_desc;
+	INIT_LIST_HEAD(&ep->queue);
+
+	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+	/* initialize other endpoints */
+	for (i = 2; i < dev->ep_max; i++) {
+		ep = &dev->ep[i];
+		if (i % 2)
+			snprintf(name, sizeof(name), "ep%din", i / 2);
+		else
+			snprintf(name, sizeof(name), "ep%dout", i / 2);
+		ep->dev = dev;
+		strncpy(ep->name, name, sizeof(ep->name));
+		ep->ep.name = ep->name;
+
+		ep->ep.ops = &langwell_ep_ops;
+		ep->stopped = 0;
+		ep->ep.maxpacket = (unsigned short) ~0;
+		ep->ep_num = i / 2;
+
+		INIT_LIST_HEAD(&ep->queue);
+		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+		ep->dqh = &dev->ep_dqh[i];
+	}
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* enable interrupt and set controller to run state */
+static void langwell_udc_start(struct langwell_udc *dev)
+{
+	u32	usbintr, usbcmd;
+	DBG(dev, "---> %s()\n", __func__);
+
+	/* enable interrupts */
+	usbintr = INTR_ULPIE	/* ULPI */
+		| INTR_SLE	/* suspend */
+		/* | INTR_SRE	SOF received */
+		| INTR_URE	/* USB reset */
+		| INTR_AAE	/* async advance */
+		| INTR_SEE	/* system error */
+		| INTR_FRE	/* frame list rollover */
+		| INTR_PCE	/* port change detect */
+		| INTR_UEE	/* USB error interrupt */
+		| INTR_UE;	/* USB interrupt */
+	writel(usbintr, &dev->op_regs->usbintr);
+
+	/* clear stopped bit */
+	dev->stopped = 0;
+
+	/* set controller to run */
+	usbcmd = readl(&dev->op_regs->usbcmd);
+	usbcmd |= CMD_RUNSTOP;
+	writel(usbcmd, &dev->op_regs->usbcmd);
+
+	DBG(dev, "<--- %s()\n", __func__);
+	return;
+}
+
+
+/* disable interrupt and set controller to stop state */
+static void langwell_udc_stop(struct langwell_udc *dev)
+{
+	u32	usbcmd;
+
+	DBG(dev, "---> %s()\n", __func__);
+
+	/* disable all interrupts */
+	writel(0, &dev->op_regs->usbintr);
+
+	/* set stopped bit */
+	dev->stopped = 1;
+
+	/* set controller to stop state */
+	usbcmd = readl(&dev->op_regs->usbcmd);
+	usbcmd &= ~CMD_RUNSTOP;
+	writel(usbcmd, &dev->op_regs->usbcmd);
+
+	DBG(dev, "<--- %s()\n", __func__);
+	return;
+}
+
+
+/* stop all USB activities */
+static void stop_activity(struct langwell_udc *dev,
+		struct usb_gadget_driver *driver)
+{
+	struct langwell_ep	*ep;
+	DBG(dev, "---> %s()\n", __func__);
+
+	nuke(&dev->ep[0], -ESHUTDOWN);
+
+	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+		nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&dev->lock);
+		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+	}
+
+	DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* device "function" sysfs attribute file */
+static ssize_t show_function(struct device *_dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct langwell_udc	*dev = the_controller;
+
+	if (!dev->driver || !dev->driver->function
+			|| strlen(dev->driver->function) > PAGE_SIZE)
+		return 0;
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
+}
+static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
+
+
+/* device "langwell_udc" sysfs attribute file */
+static ssize_t show_langwell_udc(struct device *_dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct langwell_udc	*dev = the_controller;
+	struct langwell_request *req;
+	struct langwell_ep	*ep = NULL;
+	char			*next;
+	unsigned		size;
+	unsigned		t;
+	unsigned		i;
+	unsigned long		flags;
+	u32			tmp_reg;
+
+	next = buf;
+	size = PAGE_SIZE;
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* driver basic information */
+	t = scnprintf(next, size,
+			DRIVER_DESC "\n"
+			"%s version: %s\n"
+			"Gadget driver: %s\n\n",
+			driver_name, DRIVER_VERSION,
+			dev->driver ? dev->driver->driver.name : "(none)");
+	size -= t;
+	next += t;
+
+	/* device registers */
+	tmp_reg = readl(&dev->op_regs->usbcmd);
+	t = scnprintf(next, size,
+			"USBCMD reg:\n"
+			"SetupTW: %d\n"
+			"Run/Stop: %s\n\n",
+			(tmp_reg & CMD_SUTW) ? 1 : 0,
+			(tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->usbsts);
+	t = scnprintf(next, size,
+			"USB Status Reg:\n"
+			"Device Suspend: %d\n"
+			"Reset Received: %d\n"
+			"System Error: %s\n"
+			"USB Error Interrupt: %s\n\n",
+			(tmp_reg & STS_SLI) ? 1 : 0,
+			(tmp_reg & STS_URI) ? 1 : 0,
+			(tmp_reg & STS_SEI) ? "Error" : "No error",
+			(tmp_reg & STS_UEI) ? "Error detected" : "No error");
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->usbintr);
+	t = scnprintf(next, size,
+			"USB Intrrupt Enable Reg:\n"
+			"Sleep Enable: %d\n"
+			"SOF Received Enable: %d\n"
+			"Reset Enable: %d\n"
+			"System Error Enable: %d\n"
+			"Port Change Dectected Enable: %d\n"
+			"USB Error Intr Enable: %d\n"
+			"USB Intr Enable: %d\n\n",
+			(tmp_reg & INTR_SLE) ? 1 : 0,
+			(tmp_reg & INTR_SRE) ? 1 : 0,
+			(tmp_reg & INTR_URE) ? 1 : 0,
+			(tmp_reg & INTR_SEE) ? 1 : 0,
+			(tmp_reg & INTR_PCE) ? 1 : 0,
+			(tmp_reg & INTR_UEE) ? 1 : 0,
+			(tmp_reg & INTR_UE) ? 1 : 0);
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->frindex);
+	t = scnprintf(next, size,
+			"USB Frame Index Reg:\n"
+			"Frame Number is 0x%08x\n\n",
+			(tmp_reg & FRINDEX_MASK));
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->deviceaddr);
+	t = scnprintf(next, size,
+			"USB Device Address Reg:\n"
+			"Device Addr is 0x%x\n\n",
+			USBADR(tmp_reg));
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->endpointlistaddr);
+	t = scnprintf(next, size,
+			"USB Endpoint List Address Reg:\n"
+			"Endpoint List Pointer is 0x%x\n\n",
+			EPBASE(tmp_reg));
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->portsc1);
+	t = scnprintf(next, size,
+		"USB Port Status & Control Reg:\n"
+		"Port Reset: %s\n"
+		"Port Suspend Mode: %s\n"
+		"Over-current Change: %s\n"
+		"Port Enable/Disable Change: %s\n"
+		"Port Enabled/Disabled: %s\n"
+		"Current Connect Status: %s\n\n",
+		(tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
+		(tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
+		(tmp_reg & PORTS_OCC) ? "Detected" : "No",
+		(tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
+		(tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
+		(tmp_reg & PORTS_CCS) ?  "Attached" : "Not Attached");
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->devlc);
+	t = scnprintf(next, size,
+		"Device LPM Control Reg:\n"
+		"Parallel Transceiver : %d\n"
+		"Serial Transceiver : %d\n"
+		"Port Speed: %s\n"
+		"Port Force Full Speed Connenct: %s\n"
+		"PHY Low Power Suspend Clock Disable: %s\n"
+		"BmAttributes: %d\n\n",
+		LPM_PTS(tmp_reg),
+		(tmp_reg & LPM_STS) ? 1 : 0,
+		({
+			char	*s;
+			switch (LPM_PSPD(tmp_reg)) {
+			case LPM_SPEED_FULL:
+				s = "Full Speed"; break;
+			case LPM_SPEED_LOW:
+				s = "Low Speed"; break;
+			case LPM_SPEED_HIGH:
+				s = "High Speed"; break;
+			default:
+				s = "Unknown Speed"; break;
+			}
+			s;
+		}),
+		(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
+		(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
+		LPM_BA(tmp_reg));
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->usbmode);
+	t = scnprintf(next, size,
+			"USB Mode Reg:\n"
+			"Controller Mode is : %s\n\n", ({
+				char *s;
+				switch (MODE_CM(tmp_reg)) {
+				case MODE_IDLE:
+					s = "Idle"; break;
+				case MODE_DEVICE:
+					s = "Device Controller"; break;
+				case MODE_HOST:
+					s = "Host Controller"; break;
+				default:
+					s = "None"; break;
+				}
+				s;
+			}));
+	size -= t;
+	next += t;
+
+	tmp_reg = readl(&dev->op_regs->endptsetupstat);
+	t = scnprintf(next, size,
+			"Endpoint Setup Status Reg:\n"
+			"SETUP on ep 0x%04x\n\n",
+			tmp_reg & SETUPSTAT_MASK);
+	size -= t;
+	next += t;
+
+	for (i = 0; i < dev->ep_max / 2; i++) {
+		tmp_reg = readl(&dev->op_regs->endptctrl[i]);
+		t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
+				i, tmp_reg);
+		size -= t;
+		next += t;
+	}
+	tmp_reg = readl(&dev->op_regs->endptprime);
+	t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
+	size -= t;
+	next += t;
+
+	/* langwell_udc, langwell_ep, langwell_request structure information */
+	ep = &dev->ep[0];
+	t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
+			ep->ep.name, ep->ep.maxpacket, ep->ep_num);
+	size -= t;
+	next += t;
+
+	if (list_empty(&ep->queue)) {
+		t = scnprintf(next, size, "its req queue is empty\n\n");
+		size -= t;
+		next += t;
+	} else {
+		list_for_each_entry(req, &ep->queue, queue) {
+			t = scnprintf(next, size,
+				"req %p actual 0x%x length 0x%x  buf %p\n",
+				&req->req, req->req.actual,
+				req->req.length, req->req.buf);
+			size -= t;
+			next += t;
+		}
+	}
+	/* other gadget->eplist ep */
+	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+		if (ep->desc) {
+			t = scnprintf(next, size,
+					"\n%s MaxPacketSize: 0x%x, "
+					"ep_num: %d\n",
+					ep->ep.name, ep->ep.maxpacket,
+					ep->ep_num);
+			size -= t;
+			next += t;
+
+			if (list_empty(&ep->queue)) {
+				t = scnprintf(next, size,
+						"its req queue is empty\n\n");
+				size -= t;
+				next += t;
+			} else {
+				list_for_each_entry(req, &ep->queue, queue) {
+					t = scnprintf(next, size,
+						"req %p actual 0x%x length "
+						"0x%x  buf %p\n",
+						&req->req, req->req.actual,
+						req->req.length, req->req.buf);
+					size -= t;
+					next += t;
+				}
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests.  then usb traffic follows until a
+ * disconnect is reported.  then a host may connect again, or
+ * the driver might get unbound.
+ */
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	struct langwell_udc	*dev = the_controller;
+	unsigned long		flags;
+	int			retval;
+
+	if (!dev)
+		return -ENODEV;
+
+	DBG(dev, "---> %s()\n", __func__);
+
+	if (dev->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* hook up the driver ... */
+	driver->driver.bus = NULL;
+	dev->driver = driver;
+	dev->gadget.dev.driver = &driver->driver;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	retval = driver->bind(&dev->gadget);
+	if (retval) {
+		DBG(dev, "bind to driver %s --> %d\n",
+				driver->driver.name, retval);
+		dev->driver = NULL;
+		dev->gadget.dev.driver = NULL;
+		return retval;
+	}
+
+	retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
+	if (retval)
+		goto err_unbind;
+
+	dev->usb_state = USB_STATE_ATTACHED;
+	dev->ep0_state = WAIT_FOR_SETUP;
+	dev->ep0_dir = USB_DIR_OUT;
+
+	/* enable interrupt and set controller to run state */
+	if (dev->got_irq)
+		langwell_udc_start(dev);
+
+	VDBG(dev, "After langwell_udc_start(), print all registers:\n");
+#ifdef	VERBOSE
+	print_all_registers(dev);
+#endif
+
+	INFO(dev, "register driver: %s\n", driver->driver.name);
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+
+err_unbind:
+	driver->unbind(&dev->gadget);
+	dev->gadget.dev.driver = NULL;
+	dev->driver = NULL;
+
+	DBG(dev, "<--- %s()\n", __func__);
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+
+/* unregister gadget driver */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct langwell_udc	*dev = the_controller;
+	unsigned long		flags;
+
+	if (!dev)
+		return -ENODEV;
+
+	DBG(dev, "---> %s()\n", __func__);
+
+	if (unlikely(!driver || !driver->bind || !driver->unbind))
+		return -EINVAL;
+
+	/* unbind OTG transceiver */
+	if (dev->transceiver)
+		(void)otg_set_peripheral(dev->transceiver, 0);
+
+	/* disable interrupt and set controller to stop state */
+	langwell_udc_stop(dev);
+
+	dev->usb_state = USB_STATE_ATTACHED;
+	dev->ep0_state = WAIT_FOR_SETUP;
+	dev->ep0_dir = USB_DIR_OUT;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* stop all usb activities */
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	stop_activity(dev, driver);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	/* unbind gadget driver */
+	driver->unbind(&dev->gadget);
+	dev->gadget.dev.driver = NULL;
+	dev->driver = NULL;
+
+	device_remove_file(&dev->pdev->dev, &dev_attr_function);
+
+	INFO(dev, "unregistered driver '%s'\n", driver->driver.name);
+	DBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * setup tripwire is used as a semaphore to ensure that the setup data
+ * payload is extracted from a dQH without being corrupted
+ */
+static void setup_tripwire(struct langwell_udc *dev)
+{
+	u32			usbcmd,
+				endptsetupstat;
+	unsigned long		timeout;
+	struct langwell_dqh	*dqh;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* ep0 OUT dQH */
+	dqh = &dev->ep_dqh[EP_DIR_OUT];
+
+	/* Write-Clear endptsetupstat */
+	endptsetupstat = readl(&dev->op_regs->endptsetupstat);
+	writel(endptsetupstat, &dev->op_regs->endptsetupstat);
+
+	/* wait until endptsetupstat is cleared */
+	timeout = jiffies + SETUPSTAT_TIMEOUT;
+	while (readl(&dev->op_regs->endptsetupstat)) {
+		if (time_after(jiffies, timeout)) {
+			ERROR(dev, "setup_tripwire timeout\n");
+			break;
+		}
+		cpu_relax();
+	}
+
+	/* while a hazard exists when setup packet arrives */
+	do {
+		/* set setup tripwire bit */
+		usbcmd = readl(&dev->op_regs->usbcmd);
+		writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
+
+		/* copy the setup packet to local buffer */
+		memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
+	} while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
+
+	/* Write-Clear setup tripwire bit */
+	usbcmd = readl(&dev->op_regs->usbcmd);
+	writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* protocol ep0 stall, will automatically be cleared on new transaction */
+static void ep0_stall(struct langwell_udc *dev)
+{
+	u32	endptctrl;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* set TX and RX to stall */
+	endptctrl = readl(&dev->op_regs->endptctrl[0]);
+	endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
+	writel(endptctrl, &dev->op_regs->endptctrl[0]);
+
+	/* update ep0 state */
+	dev->ep0_state = WAIT_FOR_SETUP;
+	dev->ep0_dir = USB_DIR_OUT;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* PRIME a status phase for ep0 */
+static int prime_status_phase(struct langwell_udc *dev, int dir)
+{
+	struct langwell_request	*req;
+	struct langwell_ep	*ep;
+	int			status = 0;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (dir == EP_DIR_IN)
+		dev->ep0_dir = USB_DIR_IN;
+	else
+		dev->ep0_dir = USB_DIR_OUT;
+
+	ep = &dev->ep[0];
+	dev->ep0_state = WAIT_FOR_OUT_STATUS;
+
+	req = dev->status_req;
+
+	req->ep = ep;
+	req->req.length = 0;
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->req.complete = NULL;
+	req->dtd_count = 0;
+
+	if (!req_to_dtd(req))
+		status = queue_dtd(ep, req);
+	else
+		return -ENOMEM;
+
+	if (status)
+		ERROR(dev, "can't queue ep0 status request\n");
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return status;
+}
+
+
+/* SET_ADDRESS request routine */
+static void set_address(struct langwell_udc *dev, u16 value,
+		u16 index, u16 length)
+{
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* save the new address to device struct */
+	dev->dev_addr = (u8) value;
+	VDBG(dev, "dev->dev_addr = %d\n", dev->dev_addr);
+
+	/* update usb state */
+	dev->usb_state = USB_STATE_ADDRESS;
+
+	/* STATUS phase */
+	if (prime_status_phase(dev, EP_DIR_IN))
+		ep0_stall(dev);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* return endpoint by windex */
+static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
+		u16 wIndex)
+{
+	struct langwell_ep		*ep;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+		return &dev->ep[0];
+
+	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+		u8	bEndpointAddress;
+		if (!ep->desc)
+			continue;
+
+		bEndpointAddress = ep->desc->bEndpointAddress;
+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+			continue;
+
+		if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
+			== (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
+			return ep;
+	}
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return NULL;
+}
+
+
+/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
+static int ep_is_stall(struct langwell_ep *ep)
+{
+	struct langwell_udc	*dev = ep->dev;
+	u32			endptctrl;
+	int			retval;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
+	if (is_in(ep))
+		retval = endptctrl & EPCTRL_TXS ? 1 : 0;
+	else
+		retval = endptctrl & EPCTRL_RXS ? 1 : 0;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return retval;
+}
+
+
+/* GET_STATUS request routine */
+static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
+		u16 index, u16 length)
+{
+	struct langwell_request	*req;
+	struct langwell_ep	*ep;
+	u16	status_data = 0;	/* 16 bits cpu view status data */
+	int	status = 0;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	ep = &dev->ep[0];
+
+	if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+		/* get device status */
+		status_data = 1 << USB_DEVICE_SELF_POWERED;
+		status_data |= dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
+		/* get interface status */
+		status_data = 0;
+	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
+		/* get endpoint status */
+		struct langwell_ep	*epn;
+		epn = get_ep_by_windex(dev, index);
+		/* stall if endpoint doesn't exist */
+		if (!epn)
+			goto stall;
+
+		status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
+	}
+
+	dev->ep0_dir = USB_DIR_IN;
+
+	/* borrow the per device status_req */
+	req = dev->status_req;
+
+	/* fill in the reqest structure */
+	*((u16 *) req->req.buf) = cpu_to_le16(status_data);
+	req->ep = ep;
+	req->req.length = 2;
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->req.complete = NULL;
+	req->dtd_count = 0;
+
+	/* prime the data phase */
+	if (!req_to_dtd(req))
+		status = queue_dtd(ep, req);
+	else			/* no mem */
+		goto stall;
+
+	if (status) {
+		ERROR(dev, "response error on GET_STATUS request\n");
+		goto stall;
+	}
+
+	list_add_tail(&req->queue, &ep->queue);
+	dev->ep0_state = DATA_STATE_XMIT;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return;
+stall:
+	ep0_stall(dev);
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* setup packet interrupt handler */
+static void handle_setup_packet(struct langwell_udc *dev,
+		struct usb_ctrlrequest *setup)
+{
+	u16	wValue = le16_to_cpu(setup->wValue);
+	u16	wIndex = le16_to_cpu(setup->wIndex);
+	u16	wLength = le16_to_cpu(setup->wLength);
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* ep0 fifo flush */
+	nuke(&dev->ep[0], -ESHUTDOWN);
+
+	DBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+			setup->bRequestType, setup->bRequest,
+			wValue, wIndex, wLength);
+
+	/* RNDIS gadget delegate */
+	if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
+		/* USB_CDC_SEND_ENCAPSULATED_COMMAND */
+		goto delegate;
+	}
+
+	/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
+	if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
+		/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
+		goto delegate;
+	}
+
+	/* We process some stardard setup requests here */
+	switch (setup->bRequest) {
+	case USB_REQ_GET_STATUS:
+		DBG(dev, "SETUP: USB_REQ_GET_STATUS\n");
+		/* get status, DATA and STATUS phase */
+		if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+					!= (USB_DIR_IN | USB_TYPE_STANDARD))
+			break;
+		get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
+		goto end;
+
+	case USB_REQ_SET_ADDRESS:
+		DBG(dev, "SETUP: USB_REQ_SET_ADDRESS\n");
+		/* STATUS phase */
+		if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
+						| USB_RECIP_DEVICE))
+			break;
+		set_address(dev, wValue, wIndex, wLength);
+		goto end;
+
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		/* STATUS phase */
+	{
+		int rc = -EOPNOTSUPP;
+		if (setup->bRequest == USB_REQ_SET_FEATURE)
+			DBG(dev, "SETUP: USB_REQ_SET_FEATURE\n");
+		else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
+			DBG(dev, "SETUP: USB_REQ_CLEAR_FEATURE\n");
+
+		if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
+				== (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
+			struct langwell_ep	*epn;
+			epn = get_ep_by_windex(dev, wIndex);
+			/* stall if endpoint doesn't exist */
+			if (!epn) {
+				ep0_stall(dev);
+				goto end;
+			}
+
+			if (wValue != 0 || wLength != 0
+					|| epn->ep_num > dev->ep_max)
+				break;
+
+			spin_unlock(&dev->lock);
+			rc = langwell_ep_set_halt(&epn->ep,
+					(setup->bRequest == USB_REQ_SET_FEATURE)
+						? 1 : 0);
+			spin_lock(&dev->lock);
+
+		} else if ((setup->bRequestType & (USB_RECIP_MASK
+				| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
+				| USB_TYPE_STANDARD)) {
+			if (!gadget_is_otg(&dev->gadget))
+				break;
+			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
+				dev->gadget.b_hnp_enable = 1;
+#ifdef	OTG_TRANSCEIVER
+				if (!dev->lotg->otg.default_a)
+					dev->lotg->hsm.b_hnp_enable = 1;
+#endif
+			} else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
+				dev->gadget.a_hnp_support = 1;
+			else if (setup->bRequest ==
+					USB_DEVICE_A_ALT_HNP_SUPPORT)
+				dev->gadget.a_alt_hnp_support = 1;
+			else
+				break;
+			rc = 0;
+		} else
+			break;
+
+		if (rc == 0) {
+			if (prime_status_phase(dev, EP_DIR_IN))
+				ep0_stall(dev);
+		}
+		goto end;
+	}
+
+	case USB_REQ_GET_DESCRIPTOR:
+		DBG(dev, "SETUP: USB_REQ_GET_DESCRIPTOR\n");
+		goto delegate;
+
+	case USB_REQ_SET_DESCRIPTOR:
+		DBG(dev, "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
+		goto delegate;
+
+	case USB_REQ_GET_CONFIGURATION:
+		DBG(dev, "SETUP: USB_REQ_GET_CONFIGURATION\n");
+		goto delegate;
+
+	case USB_REQ_SET_CONFIGURATION:
+		DBG(dev, "SETUP: USB_REQ_SET_CONFIGURATION\n");
+		goto delegate;
+
+	case USB_REQ_GET_INTERFACE:
+		DBG(dev, "SETUP: USB_REQ_GET_INTERFACE\n");
+		goto delegate;
+
+	case USB_REQ_SET_INTERFACE:
+		DBG(dev, "SETUP: USB_REQ_SET_INTERFACE\n");
+		goto delegate;
+
+	case USB_REQ_SYNCH_FRAME:
+		DBG(dev, "SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
+		goto delegate;
+
+	default:
+		/* delegate USB standard requests to the gadget driver */
+		goto delegate;
+delegate:
+		/* USB requests handled by gadget */
+		if (wLength) {
+			/* DATA phase from gadget, STATUS phase from udc */
+			dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+					?  USB_DIR_IN : USB_DIR_OUT;
+			VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
+					dev->ep0_dir, wLength);
+			spin_unlock(&dev->lock);
+			if (dev->driver->setup(&dev->gadget,
+					&dev->local_setup_buff) < 0)
+				ep0_stall(dev);
+			spin_lock(&dev->lock);
+			dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
+					?  DATA_STATE_XMIT : DATA_STATE_RECV;
+		} else {
+			/* no DATA phase, IN STATUS phase from gadget */
+			dev->ep0_dir = USB_DIR_IN;
+			VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
+					dev->ep0_dir, wLength);
+			spin_unlock(&dev->lock);
+			if (dev->driver->setup(&dev->gadget,
+					&dev->local_setup_buff) < 0)
+				ep0_stall(dev);
+			spin_lock(&dev->lock);
+			dev->ep0_state = WAIT_FOR_OUT_STATUS;
+		}
+		break;
+	}
+end:
+	VDBG(dev, "<--- %s()\n", __func__);
+	return;
+}
+
+
+/* transfer completion, process endpoint request and free the completed dTDs
+ * for this request
+ */
+static int process_ep_req(struct langwell_udc *dev, int index,
+		struct langwell_request *curr_req)
+{
+	struct langwell_dtd	*curr_dtd;
+	struct langwell_dqh	*curr_dqh;
+	int			td_complete, actual, remaining_length;
+	int			i, dir;
+	u8			dtd_status = 0;
+	int			retval = 0;
+
+	curr_dqh = &dev->ep_dqh[index];
+	dir = index % 2;
+
+	curr_dtd = curr_req->head;
+	td_complete = 0;
+	actual = curr_req->req.length;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	for (i = 0; i < curr_req->dtd_count; i++) {
+		remaining_length = le16_to_cpu(curr_dtd->dtd_total);
+		actual -= remaining_length;
+
+		/* command execution states by dTD */
+		dtd_status = curr_dtd->dtd_status;
+
+		if (!dtd_status) {
+			/* transfers completed successfully */
+			if (!remaining_length) {
+				td_complete++;
+				VDBG(dev, "dTD transmitted successfully\n");
+			} else {
+				if (dir) {
+					VDBG(dev, "TX dTD remains data\n");
+					retval = -EPROTO;
+					break;
+
+				} else {
+					td_complete++;
+					break;
+				}
+			}
+		} else {
+			/* transfers completed with errors */
+			if (dtd_status & DTD_STS_ACTIVE) {
+				DBG(dev, "request not completed\n");
+				retval = 1;
+				return retval;
+			} else if (dtd_status & DTD_STS_HALTED) {
+				ERROR(dev, "dTD error %08x dQH[%d]\n",
+						dtd_status, index);
+				/* clear the errors and halt condition */
+				curr_dqh->dtd_status = 0;
+				retval = -EPIPE;
+				break;
+			} else if (dtd_status & DTD_STS_DBE) {
+				DBG(dev, "data buffer (overflow) error\n");
+				retval = -EPROTO;
+				break;
+			} else if (dtd_status & DTD_STS_TRE) {
+				DBG(dev, "transaction(ISO) error\n");
+				retval = -EILSEQ;
+				break;
+			} else
+				ERROR(dev, "unknown error (0x%x)!\n",
+						dtd_status);
+		}
+
+		if (i != curr_req->dtd_count - 1)
+			curr_dtd = (struct langwell_dtd *)
+				curr_dtd->next_dtd_virt;
+	}
+
+	if (retval)
+		return retval;
+
+	curr_req->req.actual = actual;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* complete DATA or STATUS phase of ep0 prime status phase if needed */
+static void ep0_req_complete(struct langwell_udc *dev,
+		struct langwell_ep *ep0, struct langwell_request *req)
+{
+	u32	new_addr;
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (dev->usb_state == USB_STATE_ADDRESS) {
+		/* set the new address */
+		new_addr = (u32)dev->dev_addr;
+		writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
+
+		new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
+		VDBG(dev, "new_addr = %d\n", new_addr);
+	}
+
+	done(ep0, req, 0);
+
+	switch (dev->ep0_state) {
+	case DATA_STATE_XMIT:
+		/* receive status phase */
+		if (prime_status_phase(dev, EP_DIR_OUT))
+			ep0_stall(dev);
+		break;
+	case DATA_STATE_RECV:
+		/* send status phase */
+		if (prime_status_phase(dev, EP_DIR_IN))
+			ep0_stall(dev);
+		break;
+	case WAIT_FOR_OUT_STATUS:
+		dev->ep0_state = WAIT_FOR_SETUP;
+		break;
+	case WAIT_FOR_SETUP:
+		ERROR(dev, "unexpect ep0 packets\n");
+		break;
+	default:
+		ep0_stall(dev);
+		break;
+	}
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB transfer completion interrupt */
+static void handle_trans_complete(struct langwell_udc *dev)
+{
+	u32			complete_bits;
+	int			i, ep_num, dir, bit_mask, status;
+	struct langwell_ep	*epn;
+	struct langwell_request	*curr_req, *temp_req;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	complete_bits = readl(&dev->op_regs->endptcomplete);
+	VDBG(dev, "endptcomplete register: 0x%08x\n", complete_bits);
+
+	/* Write-Clear the bits in endptcomplete register */
+	writel(complete_bits, &dev->op_regs->endptcomplete);
+
+	if (!complete_bits) {
+		DBG(dev, "complete_bits = 0\n");
+		goto done;
+	}
+
+	for (i = 0; i < dev->ep_max; i++) {
+		ep_num = i / 2;
+		dir = i % 2;
+
+		bit_mask = 1 << (ep_num + 16 * dir);
+
+		if (!(complete_bits & bit_mask))
+			continue;
+
+		/* ep0 */
+		if (i == 1)
+			epn = &dev->ep[0];
+		else
+			epn = &dev->ep[i];
+
+		if (epn->name == NULL) {
+			WARNING(dev, "invalid endpoint\n");
+			continue;
+		}
+
+		if (i < 2)
+			/* ep0 in and out */
+			DBG(dev, "%s-%s transfer completed\n",
+					epn->name,
+					is_in(epn) ? "in" : "out");
+		else
+			DBG(dev, "%s transfer completed\n", epn->name);
+
+		/* process the req queue until an uncomplete request */
+		list_for_each_entry_safe(curr_req, temp_req,
+				&epn->queue, queue) {
+			status = process_ep_req(dev, i, curr_req);
+			VDBG(dev, "%s req status: %d\n", epn->name, status);
+
+			if (status)
+				break;
+
+			/* write back status to req */
+			curr_req->req.status = status;
+
+			/* ep0 request completion */
+			if (ep_num == 0) {
+				ep0_req_complete(dev, epn, curr_req);
+				break;
+			} else {
+				done(epn, curr_req, status);
+			}
+		}
+	}
+done:
+	VDBG(dev, "<--- %s()\n", __func__);
+	return;
+}
+
+
+/* port change detect interrupt handler */
+static void handle_port_change(struct langwell_udc *dev)
+{
+	u32	portsc1, devlc;
+	u32	speed;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (dev->bus_reset)
+		dev->bus_reset = 0;
+
+	portsc1 = readl(&dev->op_regs->portsc1);
+	devlc = readl(&dev->op_regs->devlc);
+	VDBG(dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
+			portsc1, devlc);
+
+	/* bus reset is finished */
+	if (!(portsc1 & PORTS_PR)) {
+		/* get the speed */
+		speed = LPM_PSPD(devlc);
+		switch (speed) {
+		case LPM_SPEED_HIGH:
+			dev->gadget.speed = USB_SPEED_HIGH;
+			break;
+		case LPM_SPEED_FULL:
+			dev->gadget.speed = USB_SPEED_FULL;
+			break;
+		case LPM_SPEED_LOW:
+			dev->gadget.speed = USB_SPEED_LOW;
+			break;
+		default:
+			dev->gadget.speed = USB_SPEED_UNKNOWN;
+			break;
+		}
+		VDBG(dev, "speed = %d, dev->gadget.speed = %d\n",
+				speed, dev->gadget.speed);
+	}
+
+	/* LPM L0 to L1 */
+	if (dev->lpm && dev->lpm_state == LPM_L0)
+		if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
+				INFO(dev, "LPM L0 to L1\n");
+				dev->lpm_state = LPM_L1;
+		}
+
+	/* LPM L1 to L0, force resume or remote wakeup finished */
+	if (dev->lpm && dev->lpm_state == LPM_L1)
+		if (!(portsc1 & PORTS_SUSP)) {
+			if (portsc1 & PORTS_SLP)
+				INFO(dev, "LPM L1 to L0, force resume\n");
+			else
+				INFO(dev, "LPM L1 to L0, remote wakeup\n");
+
+			dev->lpm_state = LPM_L0;
+		}
+
+	/* update USB state */
+	if (!dev->resume_state)
+		dev->usb_state = USB_STATE_DEFAULT;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB reset interrupt handler */
+static void handle_usb_reset(struct langwell_udc *dev)
+{
+	u32		deviceaddr,
+			endptsetupstat,
+			endptcomplete;
+	unsigned long	timeout;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	/* Write-Clear the device address */
+	deviceaddr = readl(&dev->op_regs->deviceaddr);
+	writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
+
+	dev->dev_addr = 0;
+
+	/* clear usb state */
+	dev->resume_state = 0;
+
+	/* LPM L1 to L0, reset */
+	if (dev->lpm)
+		dev->lpm_state = LPM_L0;
+
+	dev->ep0_dir = USB_DIR_OUT;
+	dev->ep0_state = WAIT_FOR_SETUP;
+	dev->remote_wakeup = 0;		/* default to 0 on reset */
+	dev->gadget.b_hnp_enable = 0;
+	dev->gadget.a_hnp_support = 0;
+	dev->gadget.a_alt_hnp_support = 0;
+
+	/* Write-Clear all the setup token semaphores */
+	endptsetupstat = readl(&dev->op_regs->endptsetupstat);
+	writel(endptsetupstat, &dev->op_regs->endptsetupstat);
+
+	/* Write-Clear all the endpoint complete status bits */
+	endptcomplete = readl(&dev->op_regs->endptcomplete);
+	writel(endptcomplete, &dev->op_regs->endptcomplete);
+
+	/* wait until all endptprime bits cleared */
+	timeout = jiffies + PRIME_TIMEOUT;
+	while (readl(&dev->op_regs->endptprime)) {
+		if (time_after(jiffies, timeout)) {
+			ERROR(dev, "USB reset timeout\n");
+			break;
+		}
+		cpu_relax();
+	}
+
+	/* write 1s to endptflush register to clear any primed buffers */
+	writel((u32) ~0, &dev->op_regs->endptflush);
+
+	if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
+		VDBG(dev, "USB bus reset\n");
+		/* bus is reseting */
+		dev->bus_reset = 1;
+
+		/* reset all the queues, stop all USB activities */
+		stop_activity(dev, dev->driver);
+		dev->usb_state = USB_STATE_DEFAULT;
+	} else {
+		VDBG(dev, "device controller reset\n");
+		/* controller reset */
+		langwell_udc_reset(dev);
+
+		/* reset all the queues, stop all USB activities */
+		stop_activity(dev, dev->driver);
+
+		/* reset ep0 dQH and endptctrl */
+		ep0_reset(dev);
+
+		/* enable interrupt and set controller to run state */
+		langwell_udc_start(dev);
+
+		dev->usb_state = USB_STATE_ATTACHED;
+	}
+
+#ifdef	OTG_TRANSCEIVER
+	/* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
+	if (!dev->lotg->otg.default_a)
+		dev->lotg->hsm.b_hnp_enable = 0;
+#endif
+
+	VDBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB bus suspend/resume interrupt */
+static void handle_bus_suspend(struct langwell_udc *dev)
+{
+	u32		devlc;
+	DBG(dev, "---> %s()\n", __func__);
+
+	dev->resume_state = dev->usb_state;
+	dev->usb_state = USB_STATE_SUSPENDED;
+
+#ifdef	OTG_TRANSCEIVER
+	if (dev->lotg->otg.default_a) {
+		if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
+			dev->lotg->hsm.b_bus_suspend = 1;
+			/* notify transceiver the state changes */
+			if (spin_trylock(&dev->lotg->wq_lock)) {
+				langwell_update_transceiver();
+				spin_unlock(&dev->lotg->wq_lock);
+			}
+		}
+		dev->lotg->hsm.b_bus_suspend_vld++;
+	} else {
+		if (!dev->lotg->hsm.a_bus_suspend) {
+			dev->lotg->hsm.a_bus_suspend = 1;
+			/* notify transceiver the state changes */
+			if (spin_trylock(&dev->lotg->wq_lock)) {
+				langwell_update_transceiver();
+				spin_unlock(&dev->lotg->wq_lock);
+			}
+		}
+	}
+#endif
+
+	/* report suspend to the driver */
+	if (dev->driver) {
+		if (dev->driver->suspend) {
+			spin_unlock(&dev->lock);
+			dev->driver->suspend(&dev->gadget);
+			spin_lock(&dev->lock);
+			DBG(dev, "suspend %s\n", dev->driver->driver.name);
+		}
+	}
+
+	/* enter PHY low power suspend */
+	devlc = readl(&dev->op_regs->devlc);
+	VDBG(dev, "devlc = 0x%08x\n", devlc);
+	devlc |= LPM_PHCD;
+	writel(devlc, &dev->op_regs->devlc);
+
+	DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+static void handle_bus_resume(struct langwell_udc *dev)
+{
+	u32		devlc;
+	DBG(dev, "---> %s()\n", __func__);
+
+	dev->usb_state = dev->resume_state;
+	dev->resume_state = 0;
+
+	/* exit PHY low power suspend */
+	devlc = readl(&dev->op_regs->devlc);
+	VDBG(dev, "devlc = 0x%08x\n", devlc);
+	devlc &= ~LPM_PHCD;
+	writel(devlc, &dev->op_regs->devlc);
+
+#ifdef	OTG_TRANSCEIVER
+	if (dev->lotg->otg.default_a == 0)
+		dev->lotg->hsm.a_bus_suspend = 0;
+#endif
+
+	/* report resume to the driver */
+	if (dev->driver) {
+		if (dev->driver->resume) {
+			spin_unlock(&dev->lock);
+			dev->driver->resume(&dev->gadget);
+			spin_lock(&dev->lock);
+			DBG(dev, "resume %s\n", dev->driver->driver.name);
+		}
+	}
+
+	DBG(dev, "<--- %s()\n", __func__);
+}
+
+
+/* USB device controller interrupt handler */
+static irqreturn_t langwell_irq(int irq, void *_dev)
+{
+	struct langwell_udc	*dev = _dev;
+	u32			usbsts,
+				usbintr,
+				irq_sts,
+				portsc1;
+
+	VDBG(dev, "---> %s()\n", __func__);
+
+	if (dev->stopped) {
+		VDBG(dev, "handle IRQ_NONE\n");
+		VDBG(dev, "<--- %s()\n", __func__);
+		return IRQ_NONE;
+	}
+
+	spin_lock(&dev->lock);
+
+	/* USB status */
+	usbsts = readl(&dev->op_regs->usbsts);
+
+	/* USB interrupt enable */
+	usbintr = readl(&dev->op_regs->usbintr);
+
+	irq_sts = usbsts & usbintr;
+	VDBG(dev, "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
+			usbsts, usbintr, irq_sts);
+
+	if (!irq_sts) {
+		VDBG(dev, "handle IRQ_NONE\n");
+		VDBG(dev, "<--- %s()\n", __func__);
+		spin_unlock(&dev->lock);
+		return IRQ_NONE;
+	}
+
+	/* Write-Clear interrupt status bits */
+	writel(irq_sts, &dev->op_regs->usbsts);
+
+	/* resume from suspend */
+	portsc1 = readl(&dev->op_regs->portsc1);
+	if (dev->usb_state == USB_STATE_SUSPENDED)
+		if (!(portsc1 & PORTS_SUSP))
+			handle_bus_resume(dev);
+
+	/* USB interrupt */
+	if (irq_sts & STS_UI) {
+		VDBG(dev, "USB interrupt\n");
+
+		/* setup packet received from ep0 */
+		if (readl(&dev->op_regs->endptsetupstat)
+				& EP0SETUPSTAT_MASK) {
+			VDBG(dev, "USB SETUP packet received interrupt\n");
+			/* setup tripwire semaphone */
+			setup_tripwire(dev);
+			handle_setup_packet(dev, &dev->local_setup_buff);
+		}
+
+		/* USB transfer completion */
+		if (readl(&dev->op_regs->endptcomplete)) {
+			VDBG(dev, "USB transfer completion interrupt\n");
+			handle_trans_complete(dev);
+		}
+	}
+
+	/* SOF received interrupt (for ISO transfer) */
+	if (irq_sts & STS_SRI) {
+		/* FIXME */
+		/* VDBG(dev, "SOF received interrupt\n"); */
+	}
+
+	/* port change detect interrupt */
+	if (irq_sts & STS_PCI) {
+		VDBG(dev, "port change detect interrupt\n");
+		handle_port_change(dev);
+	}
+
+	/* suspend interrrupt */
+	if (irq_sts & STS_SLI) {
+		VDBG(dev, "suspend interrupt\n");
+		handle_bus_suspend(dev);
+	}
+
+	/* USB reset interrupt */
+	if (irq_sts & STS_URI) {
+		VDBG(dev, "USB reset interrupt\n");
+		handle_usb_reset(dev);
+	}
+
+	/* USB error or system error interrupt */
+	if (irq_sts & (STS_UEI | STS_SEI)) {
+		/* FIXME */
+		WARNING(dev, "error IRQ, irq_sts: %x\n", irq_sts);
+	}
+
+	spin_unlock(&dev->lock);
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return IRQ_HANDLED;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* release device structure */
+static void gadget_release(struct device *_dev)
+{
+	struct langwell_udc	*dev = the_controller;
+
+	DBG(dev, "---> %s()\n", __func__);
+
+	complete(dev->done);
+
+	DBG(dev, "<--- %s()\n", __func__);
+	kfree(dev);
+}
+
+
+/* tear down the binding between this driver and the pci device */
+static void langwell_udc_remove(struct pci_dev *pdev)
+{
+	struct langwell_udc	*dev = the_controller;
+
+	DECLARE_COMPLETION(done);
+
+	BUG_ON(dev->driver);
+	DBG(dev, "---> %s()\n", __func__);
+
+	dev->done = &done;
+
+	/* free memory allocated in probe */
+	if (dev->dtd_pool)
+		dma_pool_destroy(dev->dtd_pool);
+
+	if (dev->status_req) {
+		kfree(dev->status_req->req.buf);
+		kfree(dev->status_req);
+	}
+
+	if (dev->ep_dqh)
+		dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
+			dev->ep_dqh, dev->ep_dqh_dma);
+
+	kfree(dev->ep);
+
+	/* diable IRQ handler */
+	if (dev->got_irq)
+		free_irq(pdev->irq, dev);
+
+#ifndef	OTG_TRANSCEIVER
+	if (dev->cap_regs)
+		iounmap(dev->cap_regs);
+
+	if (dev->region)
+		release_mem_region(pci_resource_start(pdev, 0),
+				pci_resource_len(pdev, 0));
+
+	if (dev->enabled)
+		pci_disable_device(pdev);
+#else
+	if (dev->transceiver) {
+		otg_put_transceiver(dev->transceiver);
+		dev->transceiver = NULL;
+		dev->lotg = NULL;
+	}
+#endif
+
+	dev->cap_regs = NULL;
+
+	INFO(dev, "unbind\n");
+	DBG(dev, "<--- %s()\n", __func__);
+
+	device_unregister(&dev->gadget.dev);
+	device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
+
+#ifndef	OTG_TRANSCEIVER
+	pci_set_drvdata(pdev, NULL);
+#endif
+
+	/* free dev, wait for the release() finished */
+	wait_for_completion(&done);
+
+	the_controller = NULL;
+}
+
+
+/*
+ * wrap this driver around the specified device, but
+ * don't respond over USB until a gadget driver binds to us.
+ */
+static int langwell_udc_probe(struct pci_dev *pdev,
+		const struct pci_device_id *id)
+{
+	struct langwell_udc	*dev;
+#ifndef	OTG_TRANSCEIVER
+	unsigned long		resource, len;
+#endif
+	void			__iomem *base = NULL;
+	size_t			size;
+	int			retval;
+
+	if (the_controller) {
+		dev_warn(&pdev->dev, "ignoring\n");
+		return -EBUSY;
+	}
+
+	/* alloc, and start init */
+	dev = kzalloc(sizeof *dev, GFP_KERNEL);
+	if (dev == NULL) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	/* initialize device spinlock */
+	spin_lock_init(&dev->lock);
+
+	dev->pdev = pdev;
+	DBG(dev, "---> %s()\n", __func__);
+
+#ifdef	OTG_TRANSCEIVER
+	/* PCI device is already enabled by otg_transceiver driver */
+	dev->enabled = 1;
+
+	/* mem region and register base */
+	dev->region = 1;
+	dev->transceiver = otg_get_transceiver();
+	dev->lotg = otg_to_langwell(dev->transceiver);
+	base = dev->lotg->regs;
+#else
+	pci_set_drvdata(pdev, dev);
+
+	/* now all the pci goodies ... */
+	if (pci_enable_device(pdev) < 0) {
+		retval = -ENODEV;
+		goto error;
+	}
+	dev->enabled = 1;
+
+	/* control register: BAR 0 */
+	resource = pci_resource_start(pdev, 0);
+	len = pci_resource_len(pdev, 0);
+	if (!request_mem_region(resource, len, driver_name)) {
+		ERROR(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto error;
+	}
+	dev->region = 1;
+
+	base = ioremap_nocache(resource, len);
+#endif
+	if (base == NULL) {
+		ERROR(dev, "can't map memory\n");
+		retval = -EFAULT;
+		goto error;
+	}
+
+	dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
+	VDBG(dev, "dev->cap_regs: %p\n", dev->cap_regs);
+	dev->op_regs = (struct langwell_op_regs __iomem *)
+		(base + OP_REG_OFFSET);
+	VDBG(dev, "dev->op_regs: %p\n", dev->op_regs);
+
+	/* irq setup after old hardware is cleaned up */
+	if (!pdev->irq) {
+		ERROR(dev, "No IRQ. Check PCI setup!\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+#ifndef	OTG_TRANSCEIVER
+	INFO(dev, "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
+			pdev->irq, resource, len, base);
+	/* enables bus-mastering for device dev */
+	pci_set_master(pdev);
+
+	if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
+				driver_name, dev) != 0) {
+		ERROR(dev, "request interrupt %d failed\n", pdev->irq);
+		retval = -EBUSY;
+		goto error;
+	}
+	dev->got_irq = 1;
+#endif
+
+	/* set stopped bit */
+	dev->stopped = 1;
+
+	/* capabilities and endpoint number */
+	dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
+	dev->dciversion = readw(&dev->cap_regs->dciversion);
+	dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
+	VDBG(dev, "dev->lpm: %d\n", dev->lpm);
+	VDBG(dev, "dev->dciversion: 0x%04x\n", dev->dciversion);
+	VDBG(dev, "dccparams: 0x%08x\n", readl(&dev->cap_regs->dccparams));
+	VDBG(dev, "dev->devcap: %d\n", dev->devcap);
+	if (!dev->devcap) {
+		ERROR(dev, "can't support device mode\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	/* a pair of endpoints (out/in) for each address */
+	dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
+	VDBG(dev, "dev->ep_max: %d\n", dev->ep_max);
+
+	/* allocate endpoints memory */
+	dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
+			GFP_KERNEL);
+	if (!dev->ep) {
+		ERROR(dev, "allocate endpoints memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	/* allocate device dQH memory */
+	size = dev->ep_max * sizeof(struct langwell_dqh);
+	VDBG(dev, "orig size = %d\n", size);
+	if (size < DQH_ALIGNMENT)
+		size = DQH_ALIGNMENT;
+	else if ((size % DQH_ALIGNMENT) != 0) {
+		size += DQH_ALIGNMENT + 1;
+		size &= ~(DQH_ALIGNMENT - 1);
+	}
+	dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
+					&dev->ep_dqh_dma, GFP_KERNEL);
+	if (!dev->ep_dqh) {
+		ERROR(dev, "allocate dQH memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+	dev->ep_dqh_size = size;
+	VDBG(dev, "ep_dqh_size = %d\n", dev->ep_dqh_size);
+
+	/* initialize ep0 status request structure */
+	dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
+	if (!dev->status_req) {
+		ERROR(dev, "allocate status_req memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+	INIT_LIST_HEAD(&dev->status_req->queue);
+
+	/* allocate a small amount of memory to get valid address */
+	dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
+	dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
+
+	dev->resume_state = USB_STATE_NOTATTACHED;
+	dev->usb_state = USB_STATE_POWERED;
+	dev->ep0_dir = USB_DIR_OUT;
+	dev->remote_wakeup = 0;	/* default to 0 on reset */
+
+#ifndef	OTG_TRANSCEIVER
+	/* reset device controller */
+	langwell_udc_reset(dev);
+#endif
+
+	/* initialize gadget structure */
+	dev->gadget.ops = &langwell_ops;	/* usb_gadget_ops */
+	dev->gadget.ep0 = &dev->ep[0].ep;	/* gadget ep0 */
+	INIT_LIST_HEAD(&dev->gadget.ep_list);	/* ep_list */
+	dev->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
+	dev->gadget.is_dualspeed = 1;		/* support dual speed */
+#ifdef	OTG_TRANSCEIVER
+	dev->gadget.is_otg = 1;			/* support otg mode */
+#endif
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev_set_name(&dev->gadget.dev, "gadget");
+	dev->gadget.dev.parent = &pdev->dev;
+	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+	dev->gadget.dev.release = gadget_release;
+	dev->gadget.name = driver_name;		/* gadget name */
+
+	/* controller endpoints reinit */
+	eps_reinit(dev);
+
+#ifndef	OTG_TRANSCEIVER
+	/* reset ep0 dQH and endptctrl */
+	ep0_reset(dev);
+#endif
+
+	/* create dTD dma_pool resource */
+	dev->dtd_pool = dma_pool_create("langwell_dtd",
+			&dev->pdev->dev,
+			sizeof(struct langwell_dtd),
+			DTD_ALIGNMENT,
+			DMA_BOUNDARY);
+
+	if (!dev->dtd_pool) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	/* done */
+	INFO(dev, "%s\n", driver_desc);
+	INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
+	INFO(dev, "Driver version: " DRIVER_VERSION "\n");
+	INFO(dev, "Support (max) %d endpoints\n", dev->ep_max);
+	INFO(dev, "Device interface version: 0x%04x\n", dev->dciversion);
+	INFO(dev, "Controller mode: %s\n", dev->devcap ? "Device" : "Host");
+	INFO(dev, "Support USB LPM: %s\n", dev->lpm ? "Yes" : "No");
+
+	VDBG(dev, "After langwell_udc_probe(), print all registers:\n");
+#ifdef	VERBOSE
+	print_all_registers(dev);
+#endif
+
+	the_controller = dev;
+
+	retval = device_register(&dev->gadget.dev);
+	if (retval)
+		goto error;
+
+	retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
+	if (retval)
+		goto error;
+
+	VDBG(dev, "<--- %s()\n", __func__);
+	return 0;
+
+error:
+	if (dev) {
+		DBG(dev, "<--- %s()\n", __func__);
+		langwell_udc_remove(pdev);
+	}
+
+	return retval;
+}
+
+
+/* device controller suspend */
+static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct langwell_udc	*dev = the_controller;
+	u32			devlc;
+
+	DBG(dev, "---> %s()\n", __func__);
+
+	/* disable interrupt and set controller to stop state */
+	langwell_udc_stop(dev);
+
+	/* diable IRQ handler */
+	if (dev->got_irq)
+		free_irq(pdev->irq, dev);
+	dev->got_irq = 0;
+
+
+	/* save PCI state */
+	pci_save_state(pdev);
+
+	/* set device power state */
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	/* enter PHY low power suspend */
+	devlc = readl(&dev->op_regs->devlc);
+	VDBG(dev, "devlc = 0x%08x\n", devlc);
+	devlc |= LPM_PHCD;
+	writel(devlc, &dev->op_regs->devlc);
+
+	DBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* device controller resume */
+static int langwell_udc_resume(struct pci_dev *pdev)
+{
+	struct langwell_udc	*dev = the_controller;
+	u32			devlc;
+
+	DBG(dev, "---> %s()\n", __func__);
+
+	/* exit PHY low power suspend */
+	devlc = readl(&dev->op_regs->devlc);
+	VDBG(dev, "devlc = 0x%08x\n", devlc);
+	devlc &= ~LPM_PHCD;
+	writel(devlc, &dev->op_regs->devlc);
+
+	/* set device D0 power state */
+	pci_set_power_state(pdev, PCI_D0);
+
+	/* restore PCI state */
+	pci_restore_state(pdev);
+
+	/* enable IRQ handler */
+	if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED, driver_name, dev)
+			!= 0) {
+		ERROR(dev, "request interrupt %d failed\n", pdev->irq);
+		return -1;
+	}
+	dev->got_irq = 1;
+
+	/* reset and start controller to run state */
+	if (dev->stopped) {
+		/* reset device controller */
+		langwell_udc_reset(dev);
+
+		/* reset ep0 dQH and endptctrl */
+		ep0_reset(dev);
+
+		/* start device if gadget is loaded */
+		if (dev->driver)
+			langwell_udc_start(dev);
+	}
+
+	/* reset USB status */
+	dev->usb_state = USB_STATE_ATTACHED;
+	dev->ep0_state = WAIT_FOR_SETUP;
+	dev->ep0_dir = USB_DIR_OUT;
+
+	DBG(dev, "<--- %s()\n", __func__);
+	return 0;
+}
+
+
+/* pci driver shutdown */
+static void langwell_udc_shutdown(struct pci_dev *pdev)
+{
+	struct langwell_udc	*dev = the_controller;
+	u32			usbmode;
+
+	DBG(dev, "---> %s()\n", __func__);
+
+	/* reset controller mode to IDLE */
+	usbmode = readl(&dev->op_regs->usbmode);
+	DBG(dev, "usbmode = 0x%08x\n", usbmode);
+	usbmode &= (~3 | MODE_IDLE);
+	writel(usbmode, &dev->op_regs->usbmode);
+
+	DBG(dev, "<--- %s()\n", __func__);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct pci_device_id pci_ids[] = { {
+	.class =	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+	.class_mask =	~0,
+	.vendor =	0x8086,
+	.device =	0x0811,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+}, { /* end: all zeroes */ }
+};
+
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+
+static struct pci_driver langwell_pci_driver = {
+	.name =		(char *) driver_name,
+	.id_table =	pci_ids,
+
+	.probe =	langwell_udc_probe,
+	.remove =	langwell_udc_remove,
+
+	/* device controller suspend/resume */
+	.suspend =	langwell_udc_suspend,
+	.resume =	langwell_udc_resume,
+
+	.shutdown =	langwell_udc_shutdown,
+};
+
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+
+static int __init init(void)
+{
+#ifdef	OTG_TRANSCEIVER
+	return langwell_register_peripheral(&langwell_pci_driver);
+#else
+	return pci_register_driver(&langwell_pci_driver);
+#endif
+}
+module_init(init);
+
+
+static void __exit cleanup(void)
+{
+#ifdef	OTG_TRANSCEIVER
+	return langwell_unregister_peripheral(&langwell_pci_driver);
+#else
+	pci_unregister_driver(&langwell_pci_driver);
+#endif
+}
+module_exit(cleanup);
+
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
new file mode 100644
index 00000000000..9719934e1c0
--- /dev/null
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -0,0 +1,228 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/usb/langwell_udc.h>
+
+#if defined(CONFIG_USB_LANGWELL_OTG)
+#include <linux/usb/langwell_otg.h>
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/* driver data structures and utilities */
+
+/*
+ * dTD: Device Endpoint Transfer Descriptor
+ * describe to the device controller the location and quantity of
+ * data to be send/received for given transfer
+ */
+struct langwell_dtd {
+	u32	dtd_next;
+/* bits 31:5, next transfer element pointer */
+#define	DTD_NEXT(d)	(((d)>>5)&0x7ffffff)
+#define	DTD_NEXT_MASK	(0x7ffffff << 5)
+/* terminate */
+#define	DTD_TERM	BIT(0)
+	/* bits 7:0, execution back states */
+	u32	dtd_status:8;
+#define	DTD_STATUS(d)	(((d)>>0)&0xff)
+#define	DTD_STS_ACTIVE	BIT(7)	/* active */
+#define	DTD_STS_HALTED	BIT(6)	/* halted */
+#define	DTD_STS_DBE	BIT(5)	/* data buffer error */
+#define	DTD_STS_TRE	BIT(3)	/* transaction error  */
+	/* bits 9:8 */
+	u32	dtd_res0:2;
+	/* bits 11:10, multipier override */
+	u32	dtd_multo:2;
+#define	DTD_MULTO	(BIT(11) | BIT(10))
+	/* bits 14:12 */
+	u32	dtd_res1:3;
+	/* bit 15, interrupt on complete */
+	u32	dtd_ioc:1;
+#define	DTD_IOC		BIT(15)
+	/* bits 30:16, total bytes */
+	u32	dtd_total:15;
+#define	DTD_TOTAL(d)	(((d)>>16)&0x7fff)
+#define	DTD_MAX_TRANSFER_LENGTH	0x4000
+	/* bit 31 */
+	u32	dtd_res2:1;
+	/* dTD buffer pointer page 0 to 4 */
+	u32	dtd_buf[5];
+#define	DTD_OFFSET_MASK	0xfff
+/* bits 31:12, buffer pointer */
+#define	DTD_BUFFER(d)	(((d)>>12)&0x3ff)
+/* bits 11:0, current offset */
+#define	DTD_C_OFFSET(d)	(((d)>>0)&0xfff)
+/* bits 10:0, frame number */
+#define	DTD_FRAME(d)	(((d)>>0)&0x7ff)
+
+	/* driver-private parts */
+
+	/* dtd dma address */
+	dma_addr_t		dtd_dma;
+	/* next dtd virtual address */
+	struct langwell_dtd	*next_dtd_virt;
+};
+
+
+/*
+ * dQH: Device Endpoint Queue Head
+ * describe where all transfers are managed
+ * 48-byte data structure, aligned on 64-byte boundary
+ *
+ * These are associated with dTD structure
+ */
+struct langwell_dqh {
+	/* endpoint capabilities and characteristics */
+	u32	dqh_res0:15;	/* bits 14:0 */
+	u32	dqh_ios:1;	/* bit 15, interrupt on setup */
+#define	DQH_IOS		BIT(15)
+	u32	dqh_mpl:11;	/* bits 26:16, maximum packet length */
+#define	DQH_MPL		(0x7ff << 16)
+	u32	dqh_res1:2;	/* bits 28:27 */
+	u32	dqh_zlt:1;	/* bit 29, zero length termination */
+#define	DQH_ZLT		BIT(29)
+	u32	dqh_mult:2;	/* bits 31:30 */
+#define	DQH_MULT	(BIT(30) | BIT(31))
+
+	/* current dTD pointer */
+	u32	dqh_current;	/* locate the transfer in progress */
+#define DQH_C_DTD(e)	\
+	(((e)>>5)&0x7ffffff)	/* bits 31:5, current dTD pointer */
+
+	/* transfer overlay, hardware parts of a struct langwell_dtd */
+	u32	dtd_next;
+	u32	dtd_status:8;	/* bits 7:0, execution back states */
+	u32	dtd_res0:2;	/* bits 9:8 */
+	u32	dtd_multo:2;	/* bits 11:10, multipier override */
+	u32	dtd_res1:3;	/* bits 14:12 */
+	u32	dtd_ioc:1;	/* bit 15, interrupt on complete */
+	u32	dtd_total:15;	/* bits 30:16, total bytes */
+	u32	dtd_res2:1;	/* bit 31 */
+	u32	dtd_buf[5];	/* dTD buffer pointer page 0 to 4 */
+
+	u32	dqh_res2;
+	struct usb_ctrlrequest	dqh_setup;	/* setup packet buffer */
+} __attribute__ ((aligned(64)));
+
+
+/* endpoint data structure */
+struct langwell_ep {
+	struct usb_ep		ep;
+	dma_addr_t		dma;
+	struct langwell_udc	*dev;
+	unsigned long		irqs;
+	struct list_head	queue;
+	struct langwell_dqh	*dqh;
+	const struct usb_endpoint_descriptor	*desc;
+	char			name[14];
+	unsigned		stopped:1,
+				ep_type:2,
+				ep_num:8;
+};
+
+
+/* request data structure */
+struct langwell_request {
+	struct usb_request	req;
+	struct langwell_dtd	*dtd, *head, *tail;
+	struct langwell_ep	*ep;
+	dma_addr_t		dtd_dma;
+	struct list_head	queue;
+	unsigned		dtd_count;
+	unsigned		mapped:1;
+};
+
+
+/* ep0 transfer state */
+enum ep0_state {
+	WAIT_FOR_SETUP,
+	DATA_STATE_XMIT,
+	DATA_STATE_NEED_ZLP,
+	WAIT_FOR_OUT_STATUS,
+	DATA_STATE_RECV,
+};
+
+
+/* device suspend state */
+enum lpm_state {
+	LPM_L0,	/* on */
+	LPM_L1,	/* LPM L1 sleep */
+	LPM_L2,	/* suspend */
+	LPM_L3,	/* off */
+};
+
+
+/* device data structure */
+struct langwell_udc {
+	/* each pci device provides one gadget, several endpoints */
+	struct usb_gadget	gadget;
+	spinlock_t		lock;	/* device lock */
+	struct langwell_ep	*ep;
+	struct usb_gadget_driver	*driver;
+	struct otg_transceiver	*transceiver;
+	u8			dev_addr;
+	u32			usb_state;
+	u32			resume_state;
+	u32			bus_reset;
+	enum lpm_state		lpm_state;
+	enum ep0_state		ep0_state;
+	u32			ep0_dir;
+	u16			dciversion;
+	unsigned		ep_max;
+	unsigned		devcap:1,
+				enabled:1,
+				region:1,
+				got_irq:1,
+				powered:1,
+				remote_wakeup:1,
+				rate:1,
+				is_reset:1,
+				softconnected:1,
+				vbus_active:1,
+				suspended:1,
+				stopped:1,
+				lpm:1;	/* LPM capability */
+
+	/* pci state used to access those endpoints */
+	struct pci_dev		*pdev;
+
+	/* Langwell otg transceiver */
+	struct langwell_otg	*lotg;
+
+	/* control registers */
+	struct langwell_cap_regs	__iomem	*cap_regs;
+	struct langwell_op_regs		__iomem	*op_regs;
+
+	struct usb_ctrlrequest	local_setup_buff;
+	struct langwell_dqh	*ep_dqh;
+	size_t			ep_dqh_size;
+	dma_addr_t		ep_dqh_dma;
+
+	/* ep0 status request */
+	struct langwell_request	*status_req;
+
+	/* dma pool */
+	struct dma_pool		*dtd_pool;
+
+	/* make sure release() is done */
+	struct completion	*done;
+};
+
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 8cc676ecbb2..1937d8c7b43 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -38,7 +38,6 @@
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
 #include <mach/udc.h>
 
 #include "pxa27x_udc.h"
@@ -474,6 +473,23 @@ static inline void udc_clear_mask_UDCCR(struct pxa_udc *udc, int mask)
 }
 
 /**
+ * ep_write_UDCCSR - set bits in UDCCSR
+ * @udc: udc device
+ * @mask: bits to set in UDCCR
+ *
+ * Sets bits in UDCCSR (UDCCSR0 and UDCCSR*).
+ *
+ * A specific case is applied to ep0 : the ACM bit is always set to 1, for
+ * SET_INTERFACE and SET_CONFIGURATION.
+ */
+static inline void ep_write_UDCCSR(struct pxa_ep *ep, int mask)
+{
+	if (is_ep0(ep))
+		mask |= UDCCSR0_ACM;
+	udc_ep_writel(ep, UDCCSR, mask);
+}
+
+/**
  * ep_count_bytes_remain - get how many bytes in udc endpoint
  * @ep: udc endpoint
  *
@@ -861,7 +877,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
 		*buf++ = udc_ep_readl(ep, UDCDR);
 	req->req.actual += count;
 
-	udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+	ep_write_UDCCSR(ep, UDCCSR_PC);
 
 	return count;
 }
@@ -969,12 +985,12 @@ static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 		if (udccsr & UDCCSR_PC) {
 			ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
 				udccsr);
-			udc_ep_writel(ep, UDCCSR, UDCCSR_PC);
+			ep_write_UDCCSR(ep, UDCCSR_PC);
 		}
 		if (udccsr & UDCCSR_TRN) {
 			ep_vdbg(ep, "Clearing Underrun on, udccsr=%x\n",
 				udccsr);
-			udc_ep_writel(ep, UDCCSR, UDCCSR_TRN);
+			ep_write_UDCCSR(ep, UDCCSR_TRN);
 		}
 
 		count = write_packet(ep, req, max);
@@ -996,7 +1012,7 @@ static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 		}
 
 		if (is_short)
-			udc_ep_writel(ep, UDCCSR, UDCCSR_SP);
+			ep_write_UDCCSR(ep, UDCCSR_SP);
 
 		/* requests complete when all IN data is in the FIFO */
 		if (is_last) {
@@ -1029,7 +1045,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 
 	while (epout_has_pkt(ep)) {
 		count = read_packet(ep, req);
-		udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+		ep_write_UDCCSR(ep, UDCCSR0_OPC);
 		inc_ep_stats_bytes(ep, count, !USB_DIR_IN);
 
 		is_short = (count < ep->fifo_size);
@@ -1074,7 +1090,7 @@ static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 
 	/* Sends either a short packet or a 0 length packet */
 	if (unlikely(is_short))
-		udc_ep_writel(ep, UDCCSR, UDCCSR0_IPR);
+		ep_write_UDCCSR(ep, UDCCSR0_IPR);
 
 	ep_dbg(ep, "in %d bytes%s%s, %d left, req=%p, udccsr0=0x%03x\n",
 		count, is_short ? "/S" : "", is_last ? "/L" : "",
@@ -1277,7 +1293,7 @@ static int pxa_ep_set_halt(struct usb_ep *_ep, int value)
 
 	/* FST, FEF bits are the same for control and non control endpoints */
 	rc = 0;
-	udc_ep_writel(ep, UDCCSR, UDCCSR_FST | UDCCSR_FEF);
+	ep_write_UDCCSR(ep, UDCCSR_FST | UDCCSR_FEF);
 	if (is_ep0(ep))
 		set_ep0state(ep->dev, STALL);
 
@@ -1343,7 +1359,7 @@ static void pxa_ep_fifo_flush(struct usb_ep *_ep)
 			udc_ep_readl(ep, UDCDR);
 	} else {
 		/* most IN status is the same, but ISO can't stall */
-		udc_ep_writel(ep, UDCCSR,
+		ep_write_UDCCSR(ep,
 				UDCCSR_PC | UDCCSR_FEF | UDCCSR_TRN
 				| (EPXFERTYPE_is_ISO(ep) ? 0 : UDCCSR_SST));
 	}
@@ -1728,6 +1744,7 @@ static void udc_enable(struct pxa_udc *udc)
 	memset(&udc->stats, 0, sizeof(udc->stats));
 
 	udc_set_mask_UDCCR(udc, UDCCR_UDE);
+	ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_ACM);
 	udelay(2);
 	if (udc_readl(udc, UDCCR) & UDCCR_EMCE)
 		dev_err(udc->dev, "Configuration errors, udc disabled\n");
@@ -1893,6 +1910,15 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
 
 	nuke(ep, -EPROTO);
 
+	/*
+	 * In the PXA320 manual, in the section about Back-to-Back setup
+	 * packets, it describes this situation.  The solution is to set OPC to
+	 * get rid of the status packet, and then continue with the setup
+	 * packet. Generalize to pxa27x CPUs.
+	 */
+	if (epout_has_pkt(ep) && (ep_count_bytes_remain(ep) == 0))
+		ep_write_UDCCSR(ep, UDCCSR0_OPC);
+
 	/* read SETUP packet */
 	for (i = 0; i < 2; i++) {
 		if (unlikely(ep_is_empty(ep)))
@@ -1919,7 +1945,7 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
 		set_ep0state(udc, OUT_DATA_STAGE);
 
 	/* Tell UDC to enter Data Stage */
-	udc_ep_writel(ep, UDCCSR, UDCCSR0_SA | UDCCSR0_OPC);
+	ep_write_UDCCSR(ep, UDCCSR0_SA | UDCCSR0_OPC);
 
 	i = udc->driver->setup(&udc->gadget, &u.r);
 	if (i < 0)
@@ -1929,7 +1955,7 @@ out:
 stall:
 	ep_dbg(ep, "protocol STALL, udccsr0=%03x err %d\n",
 		udc_ep_readl(ep, UDCCSR), i);
-	udc_ep_writel(ep, UDCCSR, UDCCSR0_FST | UDCCSR0_FTF);
+	ep_write_UDCCSR(ep, UDCCSR0_FST | UDCCSR0_FTF);
 	set_ep0state(udc, STALL);
 	goto out;
 }
@@ -1966,6 +1992,8 @@ stall:
  *     cleared by software.
  *   - clearing UDCCSR0_OPC always flushes ep0. If in setup stage, never do it
  *     before reading ep0.
+ *     This is true only for PXA27x. This is not true anymore for PXA3xx family
+ *     (check Back-to-Back setup packet in developers guide).
  *   - irq can be called on a "packet complete" event (opc_irq=1), while
  *     UDCCSR0_OPC is not yet raised (delta can be as big as 100ms
  *     from experimentation).
@@ -1998,7 +2026,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
 	if (udccsr0 & UDCCSR0_SST) {
 		ep_dbg(ep, "clearing stall status\n");
 		nuke(ep, -EPIPE);
-		udc_ep_writel(ep, UDCCSR, UDCCSR0_SST);
+		ep_write_UDCCSR(ep, UDCCSR0_SST);
 		ep0_idle(udc);
 	}
 
@@ -2023,7 +2051,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
 		break;
 	case IN_DATA_STAGE:			/* GET_DESCRIPTOR */
 		if (epout_has_pkt(ep))
-			udc_ep_writel(ep, UDCCSR, UDCCSR0_OPC);
+			ep_write_UDCCSR(ep, UDCCSR0_OPC);
 		if (req && !ep_is_full(ep))
 			completed = write_ep0_fifo(ep, req);
 		if (completed)
@@ -2036,7 +2064,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
 			ep0_end_out_req(ep, req);
 		break;
 	case STALL:
-		udc_ep_writel(ep, UDCCSR, UDCCSR0_FST);
+		ep_write_UDCCSR(ep, UDCCSR0_FST);
 		break;
 	case IN_STATUS_STAGE:
 		/*
@@ -2131,6 +2159,7 @@ static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
 
 	set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
 	udc->driver->setup(&udc->gadget, &req);
+	ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
 }
 
 /**
@@ -2159,6 +2188,7 @@ static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
 
 	set_ep0state(udc, WAIT_ACK_SET_CONF_INTERF);
 	udc->driver->setup(&udc->gadget, &req);
+	ep_write_UDCCSR(&udc->pxa_ep[0], UDCCSR0_AREN);
 }
 
 /*
@@ -2280,7 +2310,7 @@ static void irq_udc_reset(struct pxa_udc *udc)
 	memset(&udc->stats, 0, sizeof udc->stats);
 
 	nuke(ep, -EPROTO);
-	udc_ep_writel(ep, UDCCSR, UDCCSR0_FTF | UDCCSR0_OPC);
+	ep_write_UDCCSR(ep, UDCCSR0_FTF | UDCCSR0_OPC);
 	ep0_idle(udc);
 }
 
@@ -2479,6 +2509,12 @@ static void pxa_udc_shutdown(struct platform_device *_dev)
 		udc_disable(udc);
 }
 
+#ifdef CONFIG_CPU_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph()   do {} while (0)
+#endif
+
 #ifdef CONFIG_PM
 /**
  * pxa_udc_suspend - Suspend udc device
@@ -2546,8 +2582,7 @@ static int pxa_udc_resume(struct platform_device *_dev)
 	 * Software must configure the USB OTG pad, UDC, and UHC
 	 * to the state they were in before entering sleep mode.
 	 */
-	if (cpu_is_pxa27x())
-		PSSR |= PSSR_OTGPH;
+	pxa27x_clear_otgph();
 
 	return 0;
 }
@@ -2571,7 +2606,7 @@ static struct platform_driver udc_driver = {
 
 static int __init udc_init(void)
 {
-	if (!cpu_is_pxa27x())
+	if (!cpu_is_pxa27x() && !cpu_is_pxa3xx())
 		return -ENODEV;
 
 	printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index db58125331d..e25225e2658 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -130,6 +130,8 @@
 #define UP2OCR_HXOE	(1 << 17)	/* Transceiver Output Enable */
 #define UP2OCR_SEOS	(1 << 24)	/* Single-Ended Output Select */
 
+#define UDCCSR0_ACM	(1 << 9)	/* Ack Control Mode */
+#define UDCCSR0_AREN	(1 << 8)	/* Ack Response Enable */
 #define UDCCSR0_SA	(1 << 7)	/* Setup Active */
 #define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
 #define UDCCSR0_FST	(1 << 5)	/* Force Stall */
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
new file mode 100644
index 00000000000..50c71aae2cc
--- /dev/null
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -0,0 +1,3269 @@
+/* linux/drivers/usb/gadget/s3c-hsotg.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/regs-usb-hsotg.h>
+#include <plat/regs-sys.h>
+#include <plat/udc-hs.h>
+
+#define DMA_ADDR_INVALID (~((dma_addr_t)0))
+
+/* EP0_MPS_LIMIT
+ *
+ * Unfortunately there seems to be a limit of the amount of data that can
+ * be transfered by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practially means 1 packet and 63 bytes of data) when the
+ * MPS is set to 64.
+ *
+ * This means if we are wanting to move >127 bytes of data, we need to
+ * split the transactions up, but just doing one packet at a time does
+ * not work (this may be an implicit DATA0 PID on first packet of the
+ * transaction) and doing 2 packets is outside the controller's limits.
+ *
+ * If we try to lower the MPS size for EP0, then no transfers work properly
+ * for EP0, and the system will fail basic enumeration. As no cause for this
+ * has currently been found, we cannot support any large IN transfers for
+ * EP0.
+ */
+#define EP0_MPS_LIMIT	64
+
+struct s3c_hsotg;
+struct s3c_hsotg_req;
+
+/**
+ * struct s3c_hsotg_ep - driver endpoint definition.
+ * @ep: The gadget layer representation of the endpoint.
+ * @name: The driver generated name for the endpoint.
+ * @queue: Queue of requests for this endpoint.
+ * @parent: Reference back to the parent device structure.
+ * @req: The current request that the endpoint is processing. This is
+ *       used to indicate an request has been loaded onto the endpoint
+ *       and has yet to be completed (maybe due to data move, or simply
+ *	 awaiting an ack from the core all the data has been completed).
+ * @debugfs: File entry for debugfs file for this endpoint.
+ * @lock: State lock to protect contents of endpoint.
+ * @dir_in: Set to true if this endpoint is of the IN direction, which
+ *	    means that it is sending data to the Host.
+ * @index: The index for the endpoint registers.
+ * @name: The name array passed to the USB core.
+ * @halted: Set if the endpoint has been halted.
+ * @periodic: Set if this is a periodic ep, such as Interrupt
+ * @sent_zlp: Set if we've sent a zero-length packet.
+ * @total_data: The total number of data bytes done.
+ * @fifo_size: The size of the FIFO (for periodic IN endpoints)
+ * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
+ * @last_load: The offset of data for the last start of request.
+ * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
+ *
+ * This is the driver's state for each registered enpoint, allowing it
+ * to keep track of transactions that need doing. Each endpoint has a
+ * lock to protect the state, to try and avoid using an overall lock
+ * for the host controller as much as possible.
+ *
+ * For periodic IN endpoints, we have fifo_size and fifo_load to try
+ * and keep track of the amount of data in the periodic FIFO for each
+ * of these as we don't have a status register that tells us how much
+ * is in each of them.
+ */
+struct s3c_hsotg_ep {
+	struct usb_ep		ep;
+	struct list_head	queue;
+	struct s3c_hsotg	*parent;
+	struct s3c_hsotg_req	*req;
+	struct dentry		*debugfs;
+
+	spinlock_t		lock;
+
+	unsigned long		total_data;
+	unsigned int		size_loaded;
+	unsigned int		last_load;
+	unsigned int		fifo_load;
+	unsigned short		fifo_size;
+
+	unsigned char		dir_in;
+	unsigned char		index;
+
+	unsigned int		halted:1;
+	unsigned int		periodic:1;
+	unsigned int		sent_zlp:1;
+
+	char			name[10];
+};
+
+#define S3C_HSOTG_EPS	(8+1)	/* limit to 9 for the moment */
+
+/**
+ * struct s3c_hsotg - driver state.
+ * @dev: The parent device supplied to the probe function
+ * @driver: USB gadget driver
+ * @plat: The platform specific configuration data.
+ * @regs: The memory area mapped for accessing registers.
+ * @regs_res: The resource that was allocated when claiming register space.
+ * @irq: The IRQ number we are using
+ * @debug_root: root directrory for debugfs.
+ * @debug_file: main status file for debugfs.
+ * @debug_fifo: FIFO status file for debugfs.
+ * @ep0_reply: Request used for ep0 reply.
+ * @ep0_buff: Buffer for EP0 reply data, if needed.
+ * @ctrl_buff: Buffer for EP0 control requests.
+ * @ctrl_req: Request for EP0 control packets.
+ * @eps: The endpoints being supplied to the gadget framework
+ */
+struct s3c_hsotg {
+	struct device		 *dev;
+	struct usb_gadget_driver *driver;
+	struct s3c_hsotg_plat	 *plat;
+
+	void __iomem		*regs;
+	struct resource		*regs_res;
+	int			irq;
+
+	struct dentry		*debug_root;
+	struct dentry		*debug_file;
+	struct dentry		*debug_fifo;
+
+	struct usb_request	*ep0_reply;
+	struct usb_request	*ctrl_req;
+	u8			ep0_buff[8];
+	u8			ctrl_buff[8];
+
+	struct usb_gadget	gadget;
+	struct s3c_hsotg_ep	eps[];
+};
+
+/**
+ * struct s3c_hsotg_req - data transfer request
+ * @req: The USB gadget request
+ * @queue: The list of requests for the endpoint this is queued for.
+ * @in_progress: Has already had size/packets written to core
+ * @mapped: DMA buffer for this request has been mapped via dma_map_single().
+ */
+struct s3c_hsotg_req {
+	struct usb_request	req;
+	struct list_head	queue;
+	unsigned char		in_progress;
+	unsigned char		mapped;
+};
+
+/* conversion functions */
+static inline struct s3c_hsotg_req *our_req(struct usb_request *req)
+{
+	return container_of(req, struct s3c_hsotg_req, req);
+}
+
+static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct s3c_hsotg_ep, ep);
+}
+
+static inline struct s3c_hsotg *to_hsotg(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct s3c_hsotg, gadget);
+}
+
+static inline void __orr32(void __iomem *ptr, u32 val)
+{
+	writel(readl(ptr) | val, ptr);
+}
+
+static inline void __bic32(void __iomem *ptr, u32 val)
+{
+	writel(readl(ptr) & ~val, ptr);
+}
+
+/* forward decleration of functions */
+static void s3c_hsotg_dump(struct s3c_hsotg *hsotg);
+
+/**
+ * using_dma - return the DMA status of the driver.
+ * @hsotg: The driver state.
+ *
+ * Return true if we're using DMA.
+ *
+ * Currently, we have the DMA support code worked into everywhere
+ * that needs it, but the AMBA DMA implementation in the hardware can
+ * only DMA from 32bit aligned addresses. This means that gadgets such
+ * as the CDC Ethernet cannot work as they often pass packets which are
+ * not 32bit aligned.
+ *
+ * Unfortunately the choice to use DMA or not is global to the controller
+ * and seems to be only settable when the controller is being put through
+ * a core reset. This means we either need to fix the gadgets to take
+ * account of DMA alignment, or add bounce buffers (yuerk).
+ *
+ * Until this issue is sorted out, we always return 'false'.
+ */
+static inline bool using_dma(struct s3c_hsotg *hsotg)
+{
+	return false;	/* support is not complete */
+}
+
+/**
+ * s3c_hsotg_en_gsint - enable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
+{
+	u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
+	u32 new_gsintmsk;
+
+	new_gsintmsk = gsintmsk | ints;
+
+	if (new_gsintmsk != gsintmsk) {
+		dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
+		writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
+	}
+}
+
+/**
+ * s3c_hsotg_disable_gsint - disable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
+{
+	u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
+	u32 new_gsintmsk;
+
+	new_gsintmsk = gsintmsk & ~ints;
+
+	if (new_gsintmsk != gsintmsk)
+		writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
+}
+
+/**
+ * s3c_hsotg_ctrl_epint - enable/disable an endpoint irq
+ * @hsotg: The device state
+ * @ep: The endpoint index
+ * @dir_in: True if direction is in.
+ * @en: The enable value, true to enable
+ *
+ * Set or clear the mask for an individual endpoint's interrupt
+ * request.
+ */
+static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
+				 unsigned int ep, unsigned int dir_in,
+				 unsigned int en)
+{
+	unsigned long flags;
+	u32 bit = 1 << ep;
+	u32 daint;
+
+	if (!dir_in)
+		bit <<= 16;
+
+	local_irq_save(flags);
+	daint = readl(hsotg->regs + S3C_DAINTMSK);
+	if (en)
+		daint |= bit;
+	else
+		daint &= ~bit;
+	writel(daint, hsotg->regs + S3C_DAINTMSK);
+	local_irq_restore(flags);
+}
+
+/**
+ * s3c_hsotg_init_fifo - initialise non-periodic FIFOs
+ * @hsotg: The device instance.
+ */
+static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
+{
+	/* the ryu 2.6.24 release ahs
+	   writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
+	   writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
+		S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+		hsotg->regs + S3C_GNPTXFSIZ);
+	*/
+
+	/* set FIFO sizes to 2048/0x1C0 */
+
+	writel(2048, hsotg->regs + S3C_GRXFSIZ);
+	writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
+	       S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
+	       hsotg->regs + S3C_GNPTXFSIZ);
+}
+
+/**
+ * @ep: USB endpoint to allocate request for.
+ * @flags: Allocation flags
+ *
+ * Allocate a new USB request structure appropriate for the specified endpoint
+ */
+struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, gfp_t flags)
+{
+	struct s3c_hsotg_req *req;
+
+	req = kzalloc(sizeof(struct s3c_hsotg_req), flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	req->req.dma = DMA_ADDR_INVALID;
+	return &req->req;
+}
+
+/**
+ * is_ep_periodic - return true if the endpoint is in periodic mode.
+ * @hs_ep: The endpoint to query.
+ *
+ * Returns true if the endpoint is in periodic mode, meaning it is being
+ * used for an Interrupt or ISO transfer.
+ */
+static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
+{
+	return hs_ep->periodic;
+}
+
+/**
+ * s3c_hsotg_unmap_dma - unmap the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint for the request
+ * @hs_req: The request being processed.
+ *
+ * This is the reverse of s3c_hsotg_map_dma(), called for the completion
+ * of a request to ensure the buffer is ready for access by the caller.
+*/
+static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
+				struct s3c_hsotg_ep *hs_ep,
+				struct s3c_hsotg_req *hs_req)
+{
+	struct usb_request *req = &hs_req->req;
+	enum dma_data_direction dir;
+
+	dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+	/* ignore this if we're not moving any data */
+	if (hs_req->req.length == 0)
+		return;
+
+	if (hs_req->mapped) {
+		/* we mapped this, so unmap and remove the dma */
+
+		dma_unmap_single(hsotg->dev, req->dma, req->length, dir);
+
+		req->dma = DMA_ADDR_INVALID;
+		hs_req->mapped = 0;
+	} else {
+		dma_sync_single(hsotg->dev, req->dma, req->length, dir);
+	}
+}
+
+/**
+ * s3c_hsotg_write_fifo - write packet Data to the TxFIFO
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint we're going to write for.
+ * @hs_req: The request to write data for.
+ *
+ * This is called when the TxFIFO has some space in it to hold a new
+ * transmission and we have something to give it. The actual setup of
+ * the data size is done elsewhere, so all we have to do is to actually
+ * write the data.
+ *
+ * The return value is zero if there is more space (or nothing was done)
+ * otherwise -ENOSPC is returned if the FIFO space was used up.
+ *
+ * This routine is only needed for PIO
+*/
+static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
+				struct s3c_hsotg_ep *hs_ep,
+				struct s3c_hsotg_req *hs_req)
+{
+	bool periodic = is_ep_periodic(hs_ep);
+	u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS);
+	int buf_pos = hs_req->req.actual;
+	int to_write = hs_ep->size_loaded;
+	void *data;
+	int can_write;
+	int pkt_round;
+
+	to_write -= (buf_pos - hs_ep->last_load);
+
+	/* if there's nothing to write, get out early */
+	if (to_write == 0)
+		return 0;
+
+	if (periodic) {
+		u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
+		int size_left;
+		int size_done;
+
+		/* work out how much data was loaded so we can calculate
+		 * how much data is left in the fifo. */
+
+		size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+		dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
+			__func__, size_left,
+			hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
+
+		/* how much of the data has moved */
+		size_done = hs_ep->size_loaded - size_left;
+
+		/* how much data is left in the fifo */
+		can_write = hs_ep->fifo_load - size_done;
+		dev_dbg(hsotg->dev, "%s: => can_write1=%d\n",
+			__func__, can_write);
+
+		can_write = hs_ep->fifo_size - can_write;
+		dev_dbg(hsotg->dev, "%s: => can_write2=%d\n",
+			__func__, can_write);
+
+		if (can_write <= 0) {
+			s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+			return -ENOSPC;
+		}
+	} else {
+		if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
+			dev_dbg(hsotg->dev,
+				"%s: no queue slots available (0x%08x)\n",
+				__func__, gnptxsts);
+
+			s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
+			return -ENOSPC;
+		}
+
+		can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
+	}
+
+	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
+		 __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
+
+	/* limit to 512 bytes of data, it seems at least on the non-periodic
+	 * FIFO, requests of >512 cause the endpoint to get stuck with a
+	 * fragment of the end of the transfer in it.
+	 */
+	if (can_write > 512)
+		can_write = 512;
+
+	/* see if we can write data */
+
+	if (to_write > can_write) {
+		to_write = can_write;
+		pkt_round = to_write % hs_ep->ep.maxpacket;
+
+		/* Not sure, but we probably shouldn't be writing partial
+		 * packets into the FIFO, so round the write down to an
+		 * exact number of packets.
+		 *
+		 * Note, we do not currently check to see if we can ever
+		 * write a full packet or not to the FIFO.
+		 */
+
+		if (pkt_round)
+			to_write -= pkt_round;
+
+		/* enable correct FIFO interrupt to alert us when there
+		 * is more room left. */
+
+		s3c_hsotg_en_gsint(hsotg,
+				   periodic ? S3C_GINTSTS_PTxFEmp :
+				   S3C_GINTSTS_NPTxFEmp);
+	}
+
+	dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
+		 to_write, hs_req->req.length, can_write, buf_pos);
+
+	if (to_write <= 0)
+		return -ENOSPC;
+
+	hs_req->req.actual = buf_pos + to_write;
+	hs_ep->total_data += to_write;
+
+	if (periodic)
+		hs_ep->fifo_load += to_write;
+
+	to_write = DIV_ROUND_UP(to_write, 4);
+	data = hs_req->req.buf + buf_pos;
+
+	writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write);
+
+	return (to_write >= can_write) ? -ENOSPC : 0;
+}
+
+/**
+ * get_ep_limit - get the maximum data legnth for this endpoint
+ * @hs_ep: The endpoint
+ *
+ * Return the maximum data that can be queued in one go on a given endpoint
+ * so that transfers that are too long can be split.
+ */
+static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
+{
+	int index = hs_ep->index;
+	unsigned maxsize;
+	unsigned maxpkt;
+
+	if (index != 0) {
+		maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
+		maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
+	} else {
+		if (hs_ep->dir_in) {
+			/* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */
+			maxsize = 64+64+1;
+			maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
+		} else {
+			maxsize = 0x3f;
+			maxpkt = 2;
+		}
+	}
+
+	/* we made the constant loading easier above by using +1 */
+	maxpkt--;
+	maxsize--;
+
+	/* constrain by packet count if maxpkts*pktsize is greater
+	 * than the length register size. */
+
+	if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
+		maxsize = maxpkt * hs_ep->ep.maxpacket;
+
+	return maxsize;
+}
+
+/**
+ * s3c_hsotg_start_req - start a USB request from an endpoint's queue
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint to process a request for
+ * @hs_req: The request to start.
+ * @continuing: True if we are doing more for the current request.
+ *
+ * Start the given request running by setting the endpoint registers
+ * appropriately, and writing any data to the FIFOs.
+ */
+static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
+				struct s3c_hsotg_ep *hs_ep,
+				struct s3c_hsotg_req *hs_req,
+				bool continuing)
+{
+	struct usb_request *ureq = &hs_req->req;
+	int index = hs_ep->index;
+	int dir_in = hs_ep->dir_in;
+	u32 epctrl_reg;
+	u32 epsize_reg;
+	u32 epsize;
+	u32 ctrl;
+	unsigned length;
+	unsigned packets;
+	unsigned maxreq;
+
+	if (index != 0) {
+		if (hs_ep->req && !continuing) {
+			dev_err(hsotg->dev, "%s: active request\n", __func__);
+			WARN_ON(1);
+			return;
+		} else if (hs_ep->req != hs_req && continuing) {
+			dev_err(hsotg->dev,
+				"%s: continue different req\n", __func__);
+			WARN_ON(1);
+			return;
+		}
+	}
+
+	epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+	epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index);
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
+		__func__, readl(hsotg->regs + epctrl_reg), index,
+		hs_ep->dir_in ? "in" : "out");
+
+	length = ureq->length - ureq->actual;
+
+	if (0)
+		dev_dbg(hsotg->dev,
+			"REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n",
+			ureq->buf, length, ureq->dma,
+			ureq->no_interrupt, ureq->zero, ureq->short_not_ok);
+
+	maxreq = get_ep_limit(hs_ep);
+	if (length > maxreq) {
+		int round = maxreq % hs_ep->ep.maxpacket;
+
+		dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n",
+			__func__, length, maxreq, round);
+
+		/* round down to multiple of packets */
+		if (round)
+			maxreq -= round;
+
+		length = maxreq;
+	}
+
+	if (length)
+		packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket);
+	else
+		packets = 1;	/* send one packet if length is zero. */
+
+	if (dir_in && index != 0)
+		epsize = S3C_DxEPTSIZ_MC(1);
+	else
+		epsize = 0;
+
+	if (index != 0 && ureq->zero) {
+		/* test for the packets being exactly right for the
+		 * transfer */
+
+		if (length == (packets * hs_ep->ep.maxpacket))
+			packets++;
+	}
+
+	epsize |= S3C_DxEPTSIZ_PktCnt(packets);
+	epsize |= S3C_DxEPTSIZ_XferSize(length);
+
+	dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
+		__func__, packets, length, ureq->length, epsize, epsize_reg);
+
+	/* store the request as the current one we're doing */
+	hs_ep->req = hs_req;
+
+	/* write size / packets */
+	writel(epsize, hsotg->regs + epsize_reg);
+
+	ctrl = readl(hsotg->regs + epctrl_reg);
+
+	if (ctrl & S3C_DxEPCTL_Stall) {
+		dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
+
+		/* not sure what we can do here, if it is EP0 then we should
+		 * get this cleared once the endpoint has transmitted the
+		 * STALL packet, otherwise it needs to be cleared by the
+		 * host.
+		 */
+	}
+
+	if (using_dma(hsotg)) {
+		unsigned int dma_reg;
+
+		/* write DMA address to control register, buffer already
+		 * synced by s3c_hsotg_ep_queue().  */
+
+		dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index);
+		writel(ureq->dma, hsotg->regs + dma_reg);
+
+		dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n",
+			__func__, ureq->dma, dma_reg);
+	}
+
+	ctrl |= S3C_DxEPCTL_EPEna;	/* ensure ep enabled */
+	ctrl |= S3C_DxEPCTL_USBActEp;
+	ctrl |= S3C_DxEPCTL_CNAK;	/* clear NAK set by core */
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+	writel(ctrl, hsotg->regs + epctrl_reg);
+
+	/* set these, it seems that DMA support increments past the end
+	 * of the packet buffer so we need to calculate the length from
+	 * this information. */
+	hs_ep->size_loaded = length;
+	hs_ep->last_load = ureq->actual;
+
+	if (dir_in && !using_dma(hsotg)) {
+		/* set these anyway, we may need them for non-periodic in */
+		hs_ep->fifo_load = 0;
+
+		s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+	}
+
+	/* clear the INTknTXFEmpMsk when we start request, more as a aide
+	 * to debugging to see what is going on. */
+	if (dir_in)
+		writel(S3C_DIEPMSK_INTknTXFEmpMsk,
+		       hsotg->regs + S3C_DIEPINT(index));
+
+	/* Note, trying to clear the NAK here causes problems with transmit
+	 * on the S3C6400 ending up with the TXFIFO becomming full. */
+
+	/* check ep is enabled */
+	if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
+		dev_warn(hsotg->dev,
+			 "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n",
+			 index, readl(hsotg->regs + epctrl_reg));
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n",
+		__func__, readl(hsotg->regs + epctrl_reg));
+}
+
+/**
+ * s3c_hsotg_map_dma - map the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request is on.
+ * @req: The request being processed.
+ *
+ * We've been asked to queue a request, so ensure that the memory buffer
+ * is correctly setup for DMA. If we've been passed an extant DMA address
+ * then ensure the buffer has been synced to memory. If our buffer has no
+ * DMA memory, then we map the memory and mark our request to allow us to
+ * cleanup on completion.
+*/
+static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
+			     struct s3c_hsotg_ep *hs_ep,
+			     struct usb_request *req)
+{
+	enum dma_data_direction dir;
+	struct s3c_hsotg_req *hs_req = our_req(req);
+
+	dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+	/* if the length is zero, ignore the DMA data */
+	if (hs_req->req.length == 0)
+		return 0;
+
+	if (req->dma == DMA_ADDR_INVALID) {
+		dma_addr_t dma;
+
+		dma = dma_map_single(hsotg->dev, req->buf, req->length, dir);
+
+		if (unlikely(dma_mapping_error(hsotg->dev, dma)))
+			goto dma_error;
+
+		if (dma & 3) {
+			dev_err(hsotg->dev, "%s: unaligned dma buffer\n",
+				__func__);
+
+			dma_unmap_single(hsotg->dev, dma, req->length, dir);
+			return -EINVAL;
+		}
+
+		hs_req->mapped = 1;
+		req->dma = dma;
+	} else {
+		dma_sync_single(hsotg->dev, req->dma, req->length, dir);
+		hs_req->mapped = 0;
+	}
+
+	return 0;
+
+dma_error:
+	dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n",
+		__func__, req->buf, req->length);
+
+	return -EIO;
+}
+
+static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
+			      gfp_t gfp_flags)
+{
+	struct s3c_hsotg_req *hs_req = our_req(req);
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hs = hs_ep->parent;
+	unsigned long irqflags;
+	bool first;
+
+	dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
+		ep->name, req, req->length, req->buf, req->no_interrupt,
+		req->zero, req->short_not_ok);
+
+	/* initialise status of the request */
+	INIT_LIST_HEAD(&hs_req->queue);
+	req->actual = 0;
+	req->status = -EINPROGRESS;
+
+	/* if we're using DMA, sync the buffers as necessary */
+	if (using_dma(hs)) {
+		int ret = s3c_hsotg_map_dma(hs, hs_ep, req);
+		if (ret)
+			return ret;
+	}
+
+	spin_lock_irqsave(&hs_ep->lock, irqflags);
+
+	first = list_empty(&hs_ep->queue);
+	list_add_tail(&hs_req->queue, &hs_ep->queue);
+
+	if (first)
+		s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
+
+	spin_unlock_irqrestore(&hs_ep->lock, irqflags);
+
+	return 0;
+}
+
+static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
+				      struct usb_request *req)
+{
+	struct s3c_hsotg_req *hs_req = our_req(req);
+
+	kfree(hs_req);
+}
+
+/**
+ * s3c_hsotg_complete_oursetup - setup completion callback
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself
+ * submitted that need cleaning up.
+ */
+static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
+					struct usb_request *req)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hsotg = hs_ep->parent;
+
+	dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
+
+	s3c_hsotg_ep_free_request(ep, req);
+}
+
+/**
+ * ep_from_windex - convert control wIndex value to endpoint
+ * @hsotg: The driver state.
+ * @windex: The control request wIndex field (in host order).
+ *
+ * Convert the given wIndex into a pointer to an driver endpoint
+ * structure, or return NULL if it is not a valid endpoint.
+*/
+static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
+					   u32 windex)
+{
+	struct s3c_hsotg_ep *ep = &hsotg->eps[windex & 0x7F];
+	int dir = (windex & USB_DIR_IN) ? 1 : 0;
+	int idx = windex & 0x7F;
+
+	if (windex >= 0x100)
+		return NULL;
+
+	if (idx > S3C_HSOTG_EPS)
+		return NULL;
+
+	if (idx && ep->dir_in != dir)
+		return NULL;
+
+	return ep;
+}
+
+/**
+ * s3c_hsotg_send_reply - send reply to control request
+ * @hsotg: The device state
+ * @ep: Endpoint 0
+ * @buff: Buffer for request
+ * @length: Length of reply.
+ *
+ * Create a request and queue it on the given endpoint. This is useful as
+ * an internal method of sending replies to certain control requests, etc.
+ */
+static int s3c_hsotg_send_reply(struct s3c_hsotg *hsotg,
+				struct s3c_hsotg_ep *ep,
+				void *buff,
+				int length)
+{
+	struct usb_request *req;
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length);
+
+	req = s3c_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC);
+	hsotg->ep0_reply = req;
+	if (!req) {
+		dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__);
+		return -ENOMEM;
+	}
+
+	req->buf = hsotg->ep0_buff;
+	req->length = length;
+	req->zero = 1; /* always do zero-length final transfer */
+	req->complete = s3c_hsotg_complete_oursetup;
+
+	if (length)
+		memcpy(req->buf, buff, length);
+	else
+		ep->sent_zlp = 1;
+
+	ret = s3c_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC);
+	if (ret) {
+		dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * s3c_hsotg_process_req_status - process request GET_STATUS
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int s3c_hsotg_process_req_status(struct s3c_hsotg *hsotg,
+					struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+	struct s3c_hsotg_ep *ep;
+	__le16 reply;
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
+
+	if (!ep0->dir_in) {
+		dev_warn(hsotg->dev, "%s: direction out?\n", __func__);
+		return -EINVAL;
+	}
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		reply = cpu_to_le16(0); /* bit 0 => self powered,
+					 * bit 1 => remote wakeup */
+		break;
+
+	case USB_RECIP_INTERFACE:
+		/* currently, the data result should be zero */
+		reply = cpu_to_le16(0);
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
+		if (!ep)
+			return -ENOENT;
+
+		reply = cpu_to_le16(ep->halted ? 1 : 0);
+		break;
+
+	default:
+		return 0;
+	}
+
+	if (le16_to_cpu(ctrl->wLength) != 2)
+		return -EINVAL;
+
+	ret = s3c_hsotg_send_reply(hsotg, ep0, &reply, 2);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to send reply\n", __func__);
+		return ret;
+	}
+
+	return 1;
+}
+
+static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value);
+
+/**
+ * s3c_hsotg_process_req_featire - process request {SET,CLEAR}_FEATURE
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
+					 struct usb_ctrlrequest *ctrl)
+{
+	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
+	struct s3c_hsotg_ep *ep;
+
+	dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
+		__func__, set ? "SET" : "CLEAR");
+
+	if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
+		ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
+		if (!ep) {
+			dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
+				__func__, le16_to_cpu(ctrl->wIndex));
+			return -ENOENT;
+		}
+
+		switch (le16_to_cpu(ctrl->wValue)) {
+		case USB_ENDPOINT_HALT:
+			s3c_hsotg_ep_sethalt(&ep->ep, set);
+			break;
+
+		default:
+			return -ENOENT;
+		}
+	} else
+		return -ENOENT;  /* currently only deal with endpoint */
+
+	return 1;
+}
+
+/**
+ * s3c_hsotg_process_control - process a control request
+ * @hsotg: The device state
+ * @ctrl: The control request received
+ *
+ * The controller has received the SETUP phase of a control request, and
+ * needs to work out what to do next (and whether to pass it on to the
+ * gadget driver).
+ */
+static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
+				      struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsotg_ep *ep0 = &hsotg->eps[0];
+	int ret = 0;
+	u32 dcfg;
+
+	ep0->sent_zlp = 0;
+
+	dev_dbg(hsotg->dev, "ctrl Req=%02x, Type=%02x, V=%04x, L=%04x\n",
+		 ctrl->bRequest, ctrl->bRequestType,
+		 ctrl->wValue, ctrl->wLength);
+
+	/* record the direction of the request, for later use when enquing
+	 * packets onto EP0. */
+
+	ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0;
+	dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in);
+
+	/* if we've no data with this request, then the last part of the
+	 * transaction is going to implicitly be IN. */
+	if (ctrl->wLength == 0)
+		ep0->dir_in = 1;
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			dcfg = readl(hsotg->regs + S3C_DCFG);
+			dcfg &= ~S3C_DCFG_DevAddr_MASK;
+			dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT;
+			writel(dcfg, hsotg->regs + S3C_DCFG);
+
+			dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
+
+			ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+			return;
+
+		case USB_REQ_GET_STATUS:
+			ret = s3c_hsotg_process_req_status(hsotg, ctrl);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+		case USB_REQ_SET_FEATURE:
+			ret = s3c_hsotg_process_req_feature(hsotg, ctrl);
+			break;
+		}
+	}
+
+	/* as a fallback, try delivering it to the driver to deal with */
+
+	if (ret == 0 && hsotg->driver) {
+		ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
+		if (ret < 0)
+			dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
+	}
+
+	if (ret > 0) {
+		if (!ep0->dir_in) {
+			/* need to generate zlp in reply or take data */
+			/* todo - deal with any data we might be sent? */
+			ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+		}
+	}
+
+	/* the request is either unhandlable, or is not formatted correctly
+	 * so respond with a STALL for the status stage to indicate failure.
+	 */
+
+	if (ret < 0) {
+		u32 reg;
+		u32 ctrl;
+
+		dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
+		reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0;
+
+		/* S3C_DxEPCTL_Stall will be cleared by EP once it has
+		 * taken effect, so no need to clear later. */
+
+		ctrl = readl(hsotg->regs + reg);
+		ctrl |= S3C_DxEPCTL_Stall;
+		ctrl |= S3C_DxEPCTL_CNAK;
+		writel(ctrl, hsotg->regs + reg);
+
+		dev_dbg(hsotg->dev,
+			"writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+			ctrl, reg, readl(hsotg->regs + reg));
+
+		/* don't belive we need to anything more to get the EP
+		 * to reply with a STALL packet */
+	}
+}
+
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
+
+/**
+ * s3c_hsotg_complete_setup - completion of a setup transfer
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself submitted for
+ * EP0 setup packets
+ */
+static void s3c_hsotg_complete_setup(struct usb_ep *ep,
+				     struct usb_request *req)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hsotg = hs_ep->parent;
+
+	if (req->status < 0) {
+		dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
+		return;
+	}
+
+	if (req->actual == 0)
+		s3c_hsotg_enqueue_setup(hsotg);
+	else
+		s3c_hsotg_process_control(hsotg, req->buf);
+}
+
+/**
+ * s3c_hsotg_enqueue_setup - start a request for EP0 packets
+ * @hsotg: The device state.
+ *
+ * Enqueue a request on EP0 if necessary to received any SETUP packets
+ * received from the host.
+ */
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
+{
+	struct usb_request *req = hsotg->ctrl_req;
+	struct s3c_hsotg_req *hs_req = our_req(req);
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__);
+
+	req->zero = 0;
+	req->length = 8;
+	req->buf = hsotg->ctrl_buff;
+	req->complete = s3c_hsotg_complete_setup;
+
+	if (!list_empty(&hs_req->queue)) {
+		dev_dbg(hsotg->dev, "%s already queued???\n", __func__);
+		return;
+	}
+
+	hsotg->eps[0].dir_in = 0;
+
+	ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC);
+	if (ret < 0) {
+		dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
+		/* Don't think there's much we can do other than watch the
+		 * driver fail. */
+	}
+}
+
+/**
+ * get_ep_head - return the first request on the endpoint
+ * @hs_ep: The controller endpoint to get
+ *
+ * Get the first request on the endpoint.
+*/
+static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
+{
+	if (list_empty(&hs_ep->queue))
+		return NULL;
+
+	return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue);
+}
+
+/**
+ * s3c_hsotg_complete_request - complete a request given to us
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request was on.
+ * @hs_req: The request to complete.
+ * @result: The result code (0 => Ok, otherwise errno)
+ *
+ * The given request has finished, so call the necessary completion
+ * if it has one and then look to see if we can start a new request
+ * on the endpoint.
+ *
+ * Note, expects the ep to already be locked as appropriate.
+*/
+static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
+				       struct s3c_hsotg_ep *hs_ep,
+				       struct s3c_hsotg_req *hs_req,
+				       int result)
+{
+	bool restart;
+
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
+		return;
+	}
+
+	dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
+		hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
+
+	/* only replace the status if we've not already set an error
+	 * from a previous transaction */
+
+	if (hs_req->req.status == -EINPROGRESS)
+		hs_req->req.status = result;
+
+	hs_ep->req = NULL;
+	list_del_init(&hs_req->queue);
+
+	if (using_dma(hsotg))
+		s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
+
+	/* call the complete request with the locks off, just in case the
+	 * request tries to queue more work for this endpoint. */
+
+	if (hs_req->req.complete) {
+		spin_unlock(&hs_ep->lock);
+		hs_req->req.complete(&hs_ep->ep, &hs_req->req);
+		spin_lock(&hs_ep->lock);
+	}
+
+	/* Look to see if there is anything else to do. Note, the completion
+	 * of the previous request may have caused a new request to be started
+	 * so be careful when doing this. */
+
+	if (!hs_ep->req && result >= 0) {
+		restart = !list_empty(&hs_ep->queue);
+		if (restart) {
+			hs_req = get_ep_head(hs_ep);
+			s3c_hsotg_start_req(hsotg, hs_ep, hs_req, false);
+		}
+	}
+}
+
+/**
+ * s3c_hsotg_complete_request_lock - complete a request given to us (locked)
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request was on.
+ * @hs_req: The request to complete.
+ * @result: The result code (0 => Ok, otherwise errno)
+ *
+ * See s3c_hsotg_complete_request(), but called with the endpoint's
+ * lock held.
+*/
+static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
+					    struct s3c_hsotg_ep *hs_ep,
+					    struct s3c_hsotg_req *hs_req,
+					    int result)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hs_ep->lock, flags);
+	s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
+	spin_unlock_irqrestore(&hs_ep->lock, flags);
+}
+
+/**
+ * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
+ * @hsotg: The device state.
+ * @ep_idx: The endpoint index for the data
+ * @size: The size of data in the fifo, in bytes
+ *
+ * The FIFO status shows there is data to read from the FIFO for a given
+ * endpoint, so sort out whether we need to read the data into a request
+ * that has been made for that endpoint.
+ */
+static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
+{
+	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx];
+	struct s3c_hsotg_req *hs_req = hs_ep->req;
+	void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx);
+	int to_read;
+	int max_req;
+	int read_ptr;
+
+	if (!hs_req) {
+		u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx));
+		int ptr;
+
+		dev_warn(hsotg->dev,
+			 "%s: FIFO %d bytes on ep%d but no req (DxEPCTl=0x%08x)\n",
+			 __func__, size, ep_idx, epctl);
+
+		/* dump the data from the FIFO, we've nothing we can do */
+		for (ptr = 0; ptr < size; ptr += 4)
+			(void)readl(fifo);
+
+		return;
+	}
+
+	spin_lock(&hs_ep->lock);
+
+	to_read = size;
+	read_ptr = hs_req->req.actual;
+	max_req = hs_req->req.length - read_ptr;
+
+	if (to_read > max_req) {
+		/* more data appeared than we where willing
+		 * to deal with in this request.
+		 */
+
+		/* currently we don't deal this */
+		WARN_ON_ONCE(1);
+	}
+
+	dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
+		__func__, to_read, max_req, read_ptr, hs_req->req.length);
+
+	hs_ep->total_data += to_read;
+	hs_req->req.actual += to_read;
+	to_read = DIV_ROUND_UP(to_read, 4);
+
+	/* note, we might over-write the buffer end by 3 bytes depending on
+	 * alignment of the data. */
+	readsl(fifo, hs_req->req.buf + read_ptr, to_read);
+
+	spin_unlock(&hs_ep->lock);
+}
+
+/**
+ * s3c_hsotg_send_zlp - send zero-length packet on control endpoint
+ * @hsotg: The device instance
+ * @req: The request currently on this endpoint
+ *
+ * Generate a zero-length IN packet request for terminating a SETUP
+ * transaction.
+ *
+ * Note, since we don't write any data to the TxFIFO, then it is
+ * currently belived that we do not need to wait for any space in
+ * the TxFIFO.
+ */
+static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
+			       struct s3c_hsotg_req *req)
+{
+	u32 ctrl;
+
+	if (!req) {
+		dev_warn(hsotg->dev, "%s: no request?\n", __func__);
+		return;
+	}
+
+	if (req->req.length == 0) {
+		hsotg->eps[0].sent_zlp = 1;
+		s3c_hsotg_enqueue_setup(hsotg);
+		return;
+	}
+
+	hsotg->eps[0].dir_in = 1;
+	hsotg->eps[0].sent_zlp = 1;
+
+	dev_dbg(hsotg->dev, "sending zero-length packet\n");
+
+	/* issue a zero-sized packet to terminate this */
+	writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
+	       S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0));
+
+	ctrl = readl(hsotg->regs + S3C_DIEPCTL0);
+	ctrl |= S3C_DxEPCTL_CNAK;  /* clear NAK set by core */
+	ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
+	ctrl |= S3C_DxEPCTL_USBActEp;
+	writel(ctrl, hsotg->regs + S3C_DIEPCTL0);
+}
+
+/**
+ * s3c_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO
+ * @hsotg: The device instance
+ * @epnum: The endpoint received from
+ * @was_setup: Set if processing a SetupDone event.
+ *
+ * The RXFIFO has delivered an OutDone event, which means that the data
+ * transfer for an OUT endpoint has been completed, either by a short
+ * packet or by the finish of a transfer.
+*/
+static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
+				     int epnum, bool was_setup)
+{
+	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
+	struct s3c_hsotg_req *hs_req = hs_ep->req;
+	struct usb_request *req = &hs_req->req;
+	int result = 0;
+
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "%s: no request active\n", __func__);
+		return;
+	}
+
+	if (using_dma(hsotg)) {
+		u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
+		unsigned size_done;
+		unsigned size_left;
+
+		/* Calculate the size of the transfer by checking how much
+		 * is left in the endpoint size register and then working it
+		 * out from the amount we loaded for the transfer.
+		 *
+		 * We need to do this as DMA pointers are always 32bit aligned
+		 * so may overshoot/undershoot the transfer.
+		 */
+
+		size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+		size_done = hs_ep->size_loaded - size_left;
+		size_done += hs_ep->last_load;
+
+		req->actual = size_done;
+	}
+
+	if (req->actual < req->length && req->short_not_ok) {
+		dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
+			__func__, req->actual, req->length);
+
+		/* todo - what should we return here? there's no one else
+		 * even bothering to check the status. */
+	}
+
+	if (epnum == 0) {
+		if (!was_setup && req->complete != s3c_hsotg_complete_setup)
+			s3c_hsotg_send_zlp(hsotg, hs_req);
+	}
+
+	s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result);
+}
+
+/**
+ * s3c_hsotg_read_frameno - read current frame number
+ * @hsotg: The device instance
+ *
+ * Return the current frame number
+*/
+static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
+{
+	u32 dsts;
+
+	dsts = readl(hsotg->regs + S3C_DSTS);
+	dsts &= S3C_DSTS_SOFFN_MASK;
+	dsts >>= S3C_DSTS_SOFFN_SHIFT;
+
+	return dsts;
+}
+
+/**
+ * s3c_hsotg_handle_rx - RX FIFO has data
+ * @hsotg: The device instance
+ *
+ * The IRQ handler has detected that the RX FIFO has some data in it
+ * that requires processing, so find out what is in there and do the
+ * appropriate read.
+ *
+ * The RXFIFO is a true FIFO, the packets comming out are still in packet
+ * chunks, so if you have x packets received on an endpoint you'll get x
+ * FIFO events delivered, each with a packet's worth of data in it.
+ *
+ * When using DMA, we should not be processing events from the RXFIFO
+ * as the actual data should be sent to the memory directly and we turn
+ * on the completion interrupts to get notifications of transfer completion.
+ */
+void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
+{
+	u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP);
+	u32 epnum, status, size;
+
+	WARN_ON(using_dma(hsotg));
+
+	epnum = grxstsr & S3C_GRXSTS_EPNum_MASK;
+	status = grxstsr & S3C_GRXSTS_PktSts_MASK;
+
+	size = grxstsr & S3C_GRXSTS_ByteCnt_MASK;
+	size >>= S3C_GRXSTS_ByteCnt_SHIFT;
+
+	if (1)
+		dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
+			__func__, grxstsr, size, epnum);
+
+#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT)
+
+	switch (status >> S3C_GRXSTS_PktSts_SHIFT) {
+	case __status(S3C_GRXSTS_PktSts_GlobalOutNAK):
+		dev_dbg(hsotg->dev, "GlobalOutNAK\n");
+		break;
+
+	case __status(S3C_GRXSTS_PktSts_OutDone):
+		dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
+			s3c_hsotg_read_frameno(hsotg));
+
+		if (!using_dma(hsotg))
+			s3c_hsotg_handle_outdone(hsotg, epnum, false);
+		break;
+
+	case __status(S3C_GRXSTS_PktSts_SetupDone):
+		dev_dbg(hsotg->dev,
+			"SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+			s3c_hsotg_read_frameno(hsotg),
+			readl(hsotg->regs + S3C_DOEPCTL(0)));
+
+		s3c_hsotg_handle_outdone(hsotg, epnum, true);
+		break;
+
+	case __status(S3C_GRXSTS_PktSts_OutRX):
+		s3c_hsotg_rx_data(hsotg, epnum, size);
+		break;
+
+	case __status(S3C_GRXSTS_PktSts_SetupRX):
+		dev_dbg(hsotg->dev,
+			"SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+			s3c_hsotg_read_frameno(hsotg),
+			readl(hsotg->regs + S3C_DOEPCTL(0)));
+
+		s3c_hsotg_rx_data(hsotg, epnum, size);
+		break;
+
+	default:
+		dev_warn(hsotg->dev, "%s: unknown status %08x\n",
+			 __func__, grxstsr);
+
+		s3c_hsotg_dump(hsotg);
+		break;
+	}
+}
+
+/**
+ * s3c_hsotg_ep0_mps - turn max packet size into register setting
+ * @mps: The maximum packet size in bytes.
+*/
+static u32 s3c_hsotg_ep0_mps(unsigned int mps)
+{
+	switch (mps) {
+	case 64:
+		return S3C_D0EPCTL_MPS_64;
+	case 32:
+		return S3C_D0EPCTL_MPS_32;
+	case 16:
+		return S3C_D0EPCTL_MPS_16;
+	case 8:
+		return S3C_D0EPCTL_MPS_8;
+	}
+
+	/* bad max packet size, warn and return invalid result */
+	WARN_ON(1);
+	return (u32)-1;
+}
+
+/**
+ * s3c_hsotg_set_ep_maxpacket - set endpoint's max-packet field
+ * @hsotg: The driver state.
+ * @ep: The index number of the endpoint
+ * @mps: The maximum packet size in bytes
+ *
+ * Configure the maximum packet size for the given endpoint, updating
+ * the hardware control registers to reflect this.
+ */
+static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
+				       unsigned int ep, unsigned int mps)
+{
+	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
+	void __iomem *regs = hsotg->regs;
+	u32 mpsval;
+	u32 reg;
+
+	if (ep == 0) {
+		/* EP0 is a special case */
+		mpsval = s3c_hsotg_ep0_mps(mps);
+		if (mpsval > 3)
+			goto bad_mps;
+	} else {
+		if (mps >= S3C_DxEPCTL_MPS_LIMIT+1)
+			goto bad_mps;
+
+		mpsval = mps;
+	}
+
+	hs_ep->ep.maxpacket = mps;
+
+	/* update both the in and out endpoint controldir_ registers, even
+	 * if one of the directions may not be in use. */
+
+	reg = readl(regs + S3C_DIEPCTL(ep));
+	reg &= ~S3C_DxEPCTL_MPS_MASK;
+	reg |= mpsval;
+	writel(reg, regs + S3C_DIEPCTL(ep));
+
+	reg = readl(regs + S3C_DOEPCTL(ep));
+	reg &= ~S3C_DxEPCTL_MPS_MASK;
+	reg |= mpsval;
+	writel(reg, regs + S3C_DOEPCTL(ep));
+
+	return;
+
+bad_mps:
+	dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
+}
+
+
+/**
+ * s3c_hsotg_trytx - check to see if anything needs transmitting
+ * @hsotg: The driver state
+ * @hs_ep: The driver endpoint to check.
+ *
+ * Check to see if there is a request that has data to send, and if so
+ * make an attempt to write data into the FIFO.
+ */
+static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
+			   struct s3c_hsotg_ep *hs_ep)
+{
+	struct s3c_hsotg_req *hs_req = hs_ep->req;
+
+	if (!hs_ep->dir_in || !hs_req)
+		return 0;
+
+	if (hs_req->req.actual < hs_req->req.length) {
+		dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
+			hs_ep->index);
+		return s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+	}
+
+	return 0;
+}
+
+/**
+ * s3c_hsotg_complete_in - complete IN transfer
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint that has just completed.
+ *
+ * An IN transfer has been completed, update the transfer's state and then
+ * call the relevant completion routines.
+ */
+static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
+				  struct s3c_hsotg_ep *hs_ep)
+{
+	struct s3c_hsotg_req *hs_req = hs_ep->req;
+	u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
+	int size_left, size_done;
+
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "XferCompl but no req\n");
+		return;
+	}
+
+	/* Calculate the size of the transfer by checking how much is left
+	 * in the endpoint size register and then working it out from
+	 * the amount we loaded for the transfer.
+	 *
+	 * We do this even for DMA, as the transfer may have incremented
+	 * past the end of the buffer (DMA transfers are always 32bit
+	 * aligned).
+	 */
+
+	size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+
+	size_done = hs_ep->size_loaded - size_left;
+	size_done += hs_ep->last_load;
+
+	if (hs_req->req.actual != size_done)
+		dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n",
+			__func__, hs_req->req.actual, size_done);
+
+	hs_req->req.actual = size_done;
+
+	/* if we did all of the transfer, and there is more data left
+	 * around, then try restarting the rest of the request */
+
+	if (!size_left && hs_req->req.actual < hs_req->req.length) {
+		dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
+		s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+	} else
+		s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+}
+
+/**
+ * s3c_hsotg_epint - handle an in/out endpoint interrupt
+ * @hsotg: The driver state
+ * @idx: The index for the endpoint (0..15)
+ * @dir_in: Set if this is an IN endpoint
+ *
+ * Process and clear any interrupt pending for an individual endpoint
+*/
+static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
+			    int dir_in)
+{
+	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx];
+	u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx);
+	u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx);
+	u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx);
+	u32 ints;
+	u32 clear = 0;
+
+	ints = readl(hsotg->regs + epint_reg);
+
+	dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
+		__func__, idx, dir_in ? "in" : "out", ints);
+
+	if (ints & S3C_DxEPINT_XferCompl) {
+		dev_dbg(hsotg->dev,
+			"%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
+			__func__, readl(hsotg->regs + epctl_reg),
+			readl(hsotg->regs + epsiz_reg));
+
+		/* we get OutDone from the FIFO, so we only need to look
+		 * at completing IN requests here */
+		if (dir_in) {
+			s3c_hsotg_complete_in(hsotg, hs_ep);
+
+			if (idx == 0)
+				s3c_hsotg_enqueue_setup(hsotg);
+		} else if (using_dma(hsotg)) {
+			/* We're using DMA, we need to fire an OutDone here
+			 * as we ignore the RXFIFO. */
+
+			s3c_hsotg_handle_outdone(hsotg, idx, false);
+		}
+
+		clear |= S3C_DxEPINT_XferCompl;
+	}
+
+	if (ints & S3C_DxEPINT_EPDisbld) {
+		dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+		clear |= S3C_DxEPINT_EPDisbld;
+	}
+
+	if (ints & S3C_DxEPINT_AHBErr) {
+		dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
+		clear |= S3C_DxEPINT_AHBErr;
+	}
+
+	if (ints & S3C_DxEPINT_Setup) {  /* Setup or Timeout */
+		dev_dbg(hsotg->dev, "%s: Setup/Timeout\n",  __func__);
+
+		if (using_dma(hsotg) && idx == 0) {
+			/* this is the notification we've received a
+			 * setup packet. In non-DMA mode we'd get this
+			 * from the RXFIFO, instead we need to process
+			 * the setup here. */
+
+			if (dir_in)
+				WARN_ON_ONCE(1);
+			else
+				s3c_hsotg_handle_outdone(hsotg, 0, true);
+		}
+
+		clear |= S3C_DxEPINT_Setup;
+	}
+
+	if (ints & S3C_DxEPINT_Back2BackSetup) {
+		dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
+		clear |= S3C_DxEPINT_Back2BackSetup;
+	}
+
+	if (dir_in) {
+		/* not sure if this is important, but we'll clear it anyway
+		 */
+		if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) {
+			dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
+				__func__, idx);
+			clear |= S3C_DIEPMSK_INTknTXFEmpMsk;
+		}
+
+		/* this probably means something bad is happening */
+		if (ints & S3C_DIEPMSK_INTknEPMisMsk) {
+			dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
+				 __func__, idx);
+			clear |= S3C_DIEPMSK_INTknEPMisMsk;
+		}
+	}
+
+	writel(clear, hsotg->regs + epint_reg);
+}
+
+/**
+ * s3c_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done)
+ * @hsotg: The device state.
+ *
+ * Handle updating the device settings after the enumeration phase has
+ * been completed.
+*/
+static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
+{
+	u32 dsts = readl(hsotg->regs + S3C_DSTS);
+	int ep0_mps = 0, ep_mps;
+
+	/* This should signal the finish of the enumeration phase
+	 * of the USB handshaking, so we should now know what rate
+	 * we connected at. */
+
+	dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
+
+	/* note, since we're limited by the size of transfer on EP0, and
+	 * it seems IN transfers must be a even number of packets we do
+	 * not advertise a 64byte MPS on EP0. */
+
+	/* catch both EnumSpd_FS and EnumSpd_FS48 */
+	switch (dsts & S3C_DSTS_EnumSpd_MASK) {
+	case S3C_DSTS_EnumSpd_FS:
+	case S3C_DSTS_EnumSpd_FS48:
+		hsotg->gadget.speed = USB_SPEED_FULL;
+		dev_info(hsotg->dev, "new device is full-speed\n");
+
+		ep0_mps = EP0_MPS_LIMIT;
+		ep_mps = 64;
+		break;
+
+	case S3C_DSTS_EnumSpd_HS:
+		dev_info(hsotg->dev, "new device is high-speed\n");
+		hsotg->gadget.speed = USB_SPEED_HIGH;
+
+		ep0_mps = EP0_MPS_LIMIT;
+		ep_mps = 512;
+		break;
+
+	case S3C_DSTS_EnumSpd_LS:
+		hsotg->gadget.speed = USB_SPEED_LOW;
+		dev_info(hsotg->dev, "new device is low-speed\n");
+
+		/* note, we don't actually support LS in this driver at the
+		 * moment, and the documentation seems to imply that it isn't
+		 * supported by the PHYs on some of the devices.
+		 */
+		break;
+	}
+
+	/* we should now know the maximum packet size for an
+	 * endpoint, so set the endpoints to a default value. */
+
+	if (ep0_mps) {
+		int i;
+		s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps);
+		for (i = 1; i < S3C_HSOTG_EPS; i++)
+			s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps);
+	}
+
+	/* ensure after enumeration our EP0 is active */
+
+	s3c_hsotg_enqueue_setup(hsotg);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		readl(hsotg->regs + S3C_DIEPCTL0),
+		readl(hsotg->regs + S3C_DOEPCTL0));
+}
+
+/**
+ * kill_all_requests - remove all requests from the endpoint's queue
+ * @hsotg: The device state.
+ * @ep: The endpoint the requests may be on.
+ * @result: The result code to use.
+ * @force: Force removal of any current requests
+ *
+ * Go through the requests on the given endpoint and mark them
+ * completed with the given result code.
+ */
+static void kill_all_requests(struct s3c_hsotg *hsotg,
+			      struct s3c_hsotg_ep *ep,
+			      int result, bool force)
+{
+	struct s3c_hsotg_req *req, *treq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
+		/* currently, we can't do much about an already
+		 * running request on an in endpoint */
+
+		if (ep->req == req && ep->dir_in && !force)
+			continue;
+
+		s3c_hsotg_complete_request(hsotg, ep, req,
+					   result);
+	}
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+#define call_gadget(_hs, _entry) \
+	if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN &&	\
+	    (_hs)->driver && (_hs)->driver->_entry)	\
+		(_hs)->driver->_entry(&(_hs)->gadget);
+
+/**
+ * s3c_hsotg_disconnect_irq - disconnect irq service
+ * @hsotg: The device state.
+ *
+ * A disconnect IRQ has been received, meaning that the host has
+ * lost contact with the bus. Remove all current transactions
+ * and signal the gadget driver that this has happened.
+*/
+static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg)
+{
+	unsigned ep;
+
+	for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
+		kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true);
+
+	call_gadget(hsotg, disconnect);
+}
+
+/**
+ * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
+ * @hsotg: The device state:
+ * @periodic: True if this is a periodic FIFO interrupt
+ */
+static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
+{
+	struct s3c_hsotg_ep *ep;
+	int epno, ret;
+
+	/* look through for any more data to transmit */
+
+	for (epno = 0; epno < S3C_HSOTG_EPS; epno++) {
+		ep = &hsotg->eps[epno];
+
+		if (!ep->dir_in)
+			continue;
+
+		if ((periodic && !ep->periodic) ||
+		    (!periodic && ep->periodic))
+			continue;
+
+		ret = s3c_hsotg_trytx(hsotg, ep);
+		if (ret < 0)
+			break;
+	}
+}
+
+static struct s3c_hsotg *our_hsotg;
+
+/* IRQ flags which will trigger a retry around the IRQ loop */
+#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \
+			S3C_GINTSTS_PTxFEmp |  \
+			S3C_GINTSTS_RxFLvl)
+
+/**
+ * s3c_hsotg_irq - handle device interrupt
+ * @irq: The IRQ number triggered
+ * @pw: The pw value when registered the handler.
+ */
+static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
+{
+	struct s3c_hsotg *hsotg = pw;
+	int retry_count = 8;
+	u32 gintsts;
+	u32 gintmsk;
+
+irq_retry:
+	gintsts = readl(hsotg->regs + S3C_GINTSTS);
+	gintmsk = readl(hsotg->regs + S3C_GINTMSK);
+
+	dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
+		__func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
+
+	gintsts &= gintmsk;
+
+	if (gintsts & S3C_GINTSTS_OTGInt) {
+		u32 otgint = readl(hsotg->regs + S3C_GOTGINT);
+
+		dev_info(hsotg->dev, "OTGInt: %08x\n", otgint);
+
+		writel(otgint, hsotg->regs + S3C_GOTGINT);
+		writel(S3C_GINTSTS_OTGInt, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_DisconnInt) {
+		dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__);
+		writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS);
+
+		s3c_hsotg_disconnect_irq(hsotg);
+	}
+
+	if (gintsts & S3C_GINTSTS_SessReqInt) {
+		dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__);
+		writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_EnumDone) {
+		s3c_hsotg_irq_enumdone(hsotg);
+		writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_ConIDStsChng) {
+		dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n",
+			readl(hsotg->regs + S3C_DSTS),
+			readl(hsotg->regs + S3C_GOTGCTL));
+
+		writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) {
+		u32 daint = readl(hsotg->regs + S3C_DAINT);
+		u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT;
+		u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT);
+		int ep;
+
+		dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
+
+		for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) {
+			if (daint_out & 1)
+				s3c_hsotg_epint(hsotg, ep, 0);
+		}
+
+		for (ep = 0; ep < 15 && daint_in; ep++, daint_in >>= 1) {
+			if (daint_in & 1)
+				s3c_hsotg_epint(hsotg, ep, 1);
+		}
+
+		writel(daint, hsotg->regs + S3C_DAINT);
+		writel(gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt),
+		       hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_USBRst) {
+		dev_info(hsotg->dev, "%s: USBRst\n", __func__);
+		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
+			readl(hsotg->regs + S3C_GNPTXSTS));
+
+		kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
+
+		/* it seems after a reset we can end up with a situation
+		 * where the TXFIFO still has data in it... try flushing
+		 * it to remove anything that may still be in it.
+		 */
+
+		if (1) {
+			writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh,
+			       hsotg->regs + S3C_GRSTCTL);
+
+			dev_info(hsotg->dev, "GNPTXSTS=%08x\n",
+				 readl(hsotg->regs + S3C_GNPTXSTS));
+		}
+
+		s3c_hsotg_enqueue_setup(hsotg);
+
+		writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS);
+	}
+
+	/* check both FIFOs */
+
+	if (gintsts & S3C_GINTSTS_NPTxFEmp) {
+		dev_dbg(hsotg->dev, "NPTxFEmp\n");
+
+		/* Disable the interrupt to stop it happening again
+		 * unless one of these endpoint routines decides that
+		 * it needs re-enabling */
+
+		s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
+		s3c_hsotg_irq_fifoempty(hsotg, false);
+
+		writel(S3C_GINTSTS_NPTxFEmp, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_PTxFEmp) {
+		dev_dbg(hsotg->dev, "PTxFEmp\n");
+
+		/* See note in S3C_GINTSTS_NPTxFEmp */
+
+		s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+		s3c_hsotg_irq_fifoempty(hsotg, true);
+
+		writel(S3C_GINTSTS_PTxFEmp, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_RxFLvl) {
+		/* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
+		 * we need to retry s3c_hsotg_handle_rx if this is still
+		 * set. */
+
+		s3c_hsotg_handle_rx(hsotg);
+		writel(S3C_GINTSTS_RxFLvl, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_ModeMis) {
+		dev_warn(hsotg->dev, "warning, mode mismatch triggered\n");
+		writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_USBSusp) {
+		dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n");
+		writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS);
+
+		call_gadget(hsotg, suspend);
+	}
+
+	if (gintsts & S3C_GINTSTS_WkUpInt) {
+		dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n");
+		writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS);
+
+		call_gadget(hsotg, resume);
+	}
+
+	if (gintsts & S3C_GINTSTS_ErlySusp) {
+		dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n");
+		writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS);
+	}
+
+	/* these next two seem to crop-up occasionally causing the core
+	 * to shutdown the USB transfer, so try clearing them and logging
+	 * the occurence. */
+
+	if (gintsts & S3C_GINTSTS_GOUTNakEff) {
+		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
+
+		s3c_hsotg_dump(hsotg);
+
+		writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL);
+		writel(S3C_GINTSTS_GOUTNakEff, hsotg->regs + S3C_GINTSTS);
+	}
+
+	if (gintsts & S3C_GINTSTS_GINNakEff) {
+		dev_info(hsotg->dev, "GINNakEff triggered\n");
+
+		s3c_hsotg_dump(hsotg);
+
+		writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL);
+		writel(S3C_GINTSTS_GINNakEff, hsotg->regs + S3C_GINTSTS);
+	}
+
+	/* if we've had fifo events, we should try and go around the
+	 * loop again to see if there's any point in returning yet. */
+
+	if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
+			goto irq_retry;
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * s3c_hsotg_ep_enable - enable the given endpoint
+ * @ep: The USB endpint to configure
+ * @desc: The USB endpoint descriptor to configure with.
+ *
+ * This is called from the USB gadget code's usb_ep_enable().
+*/
+static int s3c_hsotg_ep_enable(struct usb_ep *ep,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hsotg = hs_ep->parent;
+	unsigned long flags;
+	int index = hs_ep->index;
+	u32 epctrl_reg;
+	u32 epctrl;
+	u32 mps;
+	int dir_in;
+
+	dev_dbg(hsotg->dev,
+		"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
+		__func__, ep->name, desc->bEndpointAddress, desc->bmAttributes,
+		desc->wMaxPacketSize, desc->bInterval);
+
+	/* not to be called for EP0 */
+	WARN_ON(index == 0);
+
+	dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
+	if (dir_in != hs_ep->dir_in) {
+		dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__);
+		return -EINVAL;
+	}
+
+	mps = le16_to_cpu(desc->wMaxPacketSize);
+
+	/* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
+
+	epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+	epctrl = readl(hsotg->regs + epctrl_reg);
+
+	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
+		__func__, epctrl, epctrl_reg);
+
+	spin_lock_irqsave(&hs_ep->lock, flags);
+
+	epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK);
+	epctrl |= S3C_DxEPCTL_MPS(mps);
+
+	/* mark the endpoint as active, otherwise the core may ignore
+	 * transactions entirely for this endpoint */
+	epctrl |= S3C_DxEPCTL_USBActEp;
+
+	/* set the NAK status on the endpoint, otherwise we might try and
+	 * do something with data that we've yet got a request to process
+	 * since the RXFIFO will take data for an endpoint even if the
+	 * size register hasn't been set.
+	 */
+
+	epctrl |= S3C_DxEPCTL_SNAK;
+
+	/* update the endpoint state */
+	hs_ep->ep.maxpacket = mps;
+
+	/* default, set to non-periodic */
+	hs_ep->periodic = 0;
+
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_ISOC:
+		dev_err(hsotg->dev, "no current ISOC support\n");
+		return -EINVAL;
+
+	case USB_ENDPOINT_XFER_BULK:
+		epctrl |= S3C_DxEPCTL_EPType_Bulk;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		if (dir_in) {
+			/* Allocate our TxFNum by simply using the index
+			 * of the endpoint for the moment. We could do
+			 * something better if the host indicates how
+			 * many FIFOs we are expecting to use. */
+
+			hs_ep->periodic = 1;
+			epctrl |= S3C_DxEPCTL_TxFNum(index);
+		}
+
+		epctrl |= S3C_DxEPCTL_EPType_Intterupt;
+		break;
+
+	case USB_ENDPOINT_XFER_CONTROL:
+		epctrl |= S3C_DxEPCTL_EPType_Control;
+		break;
+	}
+
+	/* for non control endpoints, set PID to D0 */
+	if (index)
+		epctrl |= S3C_DxEPCTL_SetD0PID;
+
+	dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
+		__func__, epctrl);
+
+	writel(epctrl, hsotg->regs + epctrl_reg);
+	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
+		__func__, readl(hsotg->regs + epctrl_reg));
+
+	/* enable the endpoint interrupt */
+	s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+
+	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	return 0;
+}
+
+static int s3c_hsotg_ep_disable(struct usb_ep *ep)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hsotg = hs_ep->parent;
+	int dir_in = hs_ep->dir_in;
+	int index = hs_ep->index;
+	unsigned long flags;
+	u32 epctrl_reg;
+	u32 ctrl;
+
+	dev_info(hsotg->dev, "%s(ep %p)\n", __func__, ep);
+
+	if (ep == &hsotg->eps[0].ep) {
+		dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
+		return -EINVAL;
+	}
+
+	epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+
+	/* terminate all requests with shutdown */
+	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
+
+	spin_lock_irqsave(&hs_ep->lock, flags);
+
+	ctrl = readl(hsotg->regs + epctrl_reg);
+	ctrl &= ~S3C_DxEPCTL_EPEna;
+	ctrl &= ~S3C_DxEPCTL_USBActEp;
+	ctrl |= S3C_DxEPCTL_SNAK;
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+	writel(ctrl, hsotg->regs + epctrl_reg);
+
+	/* disable endpoint interrupts */
+	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
+
+	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	return 0;
+}
+
+/**
+ * on_list - check request is on the given endpoint
+ * @ep: The endpoint to check.
+ * @test: The request to test if it is on the endpoint.
+*/
+static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
+{
+	struct s3c_hsotg_req *req, *treq;
+
+	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
+		if (req == test)
+			return true;
+	}
+
+	return false;
+}
+
+static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct s3c_hsotg_req *hs_req = our_req(req);
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hs = hs_ep->parent;
+	unsigned long flags;
+
+	dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
+
+	if (hs_req == hs_ep->req) {
+		dev_dbg(hs->dev, "%s: already in progress\n", __func__);
+		return -EINPROGRESS;
+	}
+
+	spin_lock_irqsave(&hs_ep->lock, flags);
+
+	if (!on_list(hs_ep, hs_req)) {
+		spin_unlock_irqrestore(&hs_ep->lock, flags);
+		return -EINVAL;
+	}
+
+	s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
+	spin_unlock_irqrestore(&hs_ep->lock, flags);
+
+	return 0;
+}
+
+static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hs = hs_ep->parent;
+	int index = hs_ep->index;
+	unsigned long irqflags;
+	u32 epreg;
+	u32 epctl;
+
+	dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
+
+	spin_lock_irqsave(&hs_ep->lock, irqflags);
+
+	/* write both IN and OUT control registers */
+
+	epreg = S3C_DIEPCTL(index);
+	epctl = readl(hs->regs + epreg);
+
+	if (value)
+		epctl |= S3C_DxEPCTL_Stall;
+	else
+		epctl &= ~S3C_DxEPCTL_Stall;
+
+	writel(epctl, hs->regs + epreg);
+
+	epreg = S3C_DOEPCTL(index);
+	epctl = readl(hs->regs + epreg);
+
+	if (value)
+		epctl |= S3C_DxEPCTL_Stall;
+	else
+		epctl &= ~S3C_DxEPCTL_Stall;
+
+	writel(epctl, hs->regs + epreg);
+
+	spin_unlock_irqrestore(&hs_ep->lock, irqflags);
+
+	return 0;
+}
+
+static struct usb_ep_ops s3c_hsotg_ep_ops = {
+	.enable		= s3c_hsotg_ep_enable,
+	.disable	= s3c_hsotg_ep_disable,
+	.alloc_request	= s3c_hsotg_ep_alloc_request,
+	.free_request	= s3c_hsotg_ep_free_request,
+	.queue		= s3c_hsotg_ep_queue,
+	.dequeue	= s3c_hsotg_ep_dequeue,
+	.set_halt	= s3c_hsotg_ep_sethalt,
+	/* note, don't belive we have any call for the fifo routines */
+};
+
+/**
+ * s3c_hsotg_corereset - issue softreset to the core
+ * @hsotg: The device state
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+*/
+static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
+{
+	int timeout;
+	u32 grstctl;
+
+	dev_dbg(hsotg->dev, "resetting core\n");
+
+	/* issue soft reset */
+	writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL);
+
+	timeout = 1000;
+	do {
+		grstctl = readl(hsotg->regs + S3C_GRSTCTL);
+	} while (!(grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0);
+
+	if (!grstctl & S3C_GRSTCTL_CSftRst) {
+		dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
+		return -EINVAL;
+	}
+
+	timeout = 1000;
+
+	while (1) {
+		u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL);
+
+		if (timeout-- < 0) {
+			dev_info(hsotg->dev,
+				 "%s: reset failed, GRSTCTL=%08x\n",
+				 __func__, grstctl);
+			return -ETIMEDOUT;
+		}
+
+		if (grstctl & S3C_GRSTCTL_CSftRst)
+			continue;
+
+		if (!(grstctl & S3C_GRSTCTL_AHBIdle))
+			continue;
+
+		break; 		/* reset done */
+	}
+
+	dev_dbg(hsotg->dev, "reset successful\n");
+	return 0;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	struct s3c_hsotg *hsotg = our_hsotg;
+	int ret;
+
+	if (!hsotg) {
+		printk(KERN_ERR "%s: called with no device\n", __func__);
+		return -ENODEV;
+	}
+
+	if (!driver) {
+		dev_err(hsotg->dev, "%s: no driver\n", __func__);
+		return -EINVAL;
+	}
+
+	if (driver->speed != USB_SPEED_HIGH &&
+	    driver->speed != USB_SPEED_FULL) {
+		dev_err(hsotg->dev, "%s: bad speed\n", __func__);
+	}
+
+	if (!driver->bind || !driver->setup) {
+		dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
+		return -EINVAL;
+	}
+
+	WARN_ON(hsotg->driver);
+
+	driver->driver.bus = NULL;
+	hsotg->driver = driver;
+	hsotg->gadget.dev.driver = &driver->driver;
+	hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+
+	ret = device_add(&hsotg->gadget.dev);
+	if (ret) {
+		dev_err(hsotg->dev, "failed to register gadget device\n");
+		goto err;
+	}
+
+	ret = driver->bind(&hsotg->gadget);
+	if (ret) {
+		dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name);
+
+		hsotg->gadget.dev.driver = NULL;
+		hsotg->driver = NULL;
+		goto err;
+	}
+
+	/* we must now enable ep0 ready for host detection and then
+	 * set configuration. */
+
+	s3c_hsotg_corereset(hsotg);
+
+	/* set the PLL on, remove the HNP/SRP and set the PHY */
+	writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) |
+	       (0x5 << 10), hsotg->regs + S3C_GUSBCFG);
+
+	/* looks like soft-reset changes state of FIFOs */
+	s3c_hsotg_init_fifo(hsotg);
+
+	__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
+	writel(1 << 18 | S3C_DCFG_DevSpd_HS,  hsotg->regs + S3C_DCFG);
+
+	writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt |
+	       S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst |
+	       S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt |
+	       S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt |
+	       S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff |
+	       S3C_GINTSTS_ErlySusp,
+	       hsotg->regs + S3C_GINTMSK);
+
+	if (using_dma(hsotg))
+		writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn |
+		       S3C_GAHBCFG_HBstLen_Incr4,
+		       hsotg->regs + S3C_GAHBCFG);
+	else
+		writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG);
+
+	/* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
+	 * up being flooded with interrupts if the host is polling the
+	 * endpoint to try and read data. */
+
+	writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
+	       S3C_DIEPMSK_INTknEPMisMsk |
+	       S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+	       hsotg->regs + S3C_DIEPMSK);
+
+	/* don't need XferCompl, we get that from RXFIFO in slave mode. In
+	 * DMA mode we may need this. */
+	writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
+	       S3C_DOEPMSK_EPDisbldMsk |
+	       using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
+				   S3C_DIEPMSK_TimeOUTMsk) : 0,
+	       hsotg->regs + S3C_DOEPMSK);
+
+	writel(0, hsotg->regs + S3C_DAINTMSK);
+
+	dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		 readl(hsotg->regs + S3C_DIEPCTL0),
+		 readl(hsotg->regs + S3C_DOEPCTL0));
+
+	/* enable in and out endpoint interrupts */
+	s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
+
+	/* Enable the RXFIFO when in slave mode, as this is how we collect
+	 * the data. In DMA mode, we get events from the FIFO but also
+	 * things we cannot process, so do not use it. */
+	if (!using_dma(hsotg))
+		s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl);
+
+	/* Enable interrupts for EP0 in and out */
+	s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1);
+	s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1);
+
+	__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
+	udelay(10);  /* see openiboot */
+	__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
+
+	dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
+
+	/* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
+	   writing to the EPCTL register.. */
+
+	/* set to read 1 8byte packet */
+	writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
+	       S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0);
+
+	writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
+	       S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna |
+	       S3C_DxEPCTL_USBActEp,
+	       hsotg->regs + S3C_DOEPCTL0);
+
+	/* enable, but don't activate EP0in */
+	writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
+	       S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0);
+
+	s3c_hsotg_enqueue_setup(hsotg);
+
+	dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		 readl(hsotg->regs + S3C_DIEPCTL0),
+		 readl(hsotg->regs + S3C_DOEPCTL0));
+
+	/* clear global NAKs */
+	writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
+	       hsotg->regs + S3C_DCTL);
+
+	/* remove the soft-disconnect and let's go */
+	__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
+
+	/* report to the user, and return */
+
+	dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
+	return 0;
+
+err:
+	hsotg->driver = NULL;
+	hsotg->gadget.dev.driver = NULL;
+	return ret;
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct s3c_hsotg *hsotg = our_hsotg;
+	int ep;
+
+	if (!hsotg)
+		return -ENODEV;
+
+	if (!driver || driver != hsotg->driver || !driver->unbind)
+		return -EINVAL;
+
+	/* all endpoints should be shutdown */
+	for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
+		s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
+
+	call_gadget(hsotg, disconnect);
+
+	driver->unbind(&hsotg->gadget);
+	hsotg->driver = NULL;
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+
+	device_del(&hsotg->gadget.dev);
+
+	dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
+		 driver->driver.name);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
+{
+	return s3c_hsotg_read_frameno(to_hsotg(gadget));
+}
+
+static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
+	.get_frame	= s3c_hsotg_gadget_getframe,
+};
+
+/**
+ * s3c_hsotg_initep - initialise a single endpoint
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint to be initialised.
+ * @epnum: The endpoint number
+ *
+ * Initialise the given endpoint (as part of the probe and device state
+ * creation) to give to the gadget driver. Setup the endpoint name, any
+ * direction information and other state that may be required.
+ */
+static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
+				       struct s3c_hsotg_ep *hs_ep,
+				       int epnum)
+{
+	u32 ptxfifo;
+	char *dir;
+
+	if (epnum == 0)
+		dir = "";
+	else if ((epnum % 2) == 0) {
+		dir = "out";
+	} else {
+		dir = "in";
+		hs_ep->dir_in = 1;
+	}
+
+	hs_ep->index = epnum;
+
+	snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir);
+
+	INIT_LIST_HEAD(&hs_ep->queue);
+	INIT_LIST_HEAD(&hs_ep->ep.ep_list);
+
+	spin_lock_init(&hs_ep->lock);
+
+	/* add to the list of endpoints known by the gadget driver */
+	if (epnum)
+		list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
+
+	hs_ep->parent = hsotg;
+	hs_ep->ep.name = hs_ep->name;
+	hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
+	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
+
+	/* Read the FIFO size for the Periodic TX FIFO, even if we're
+	 * an OUT endpoint, we may as well do this if in future the
+	 * code is changed to make each endpoint's direction changeable.
+	 */
+
+	ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
+	hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo);
+
+	/* if we're using dma, we need to set the next-endpoint pointer
+	 * to be something valid.
+	 */
+
+	if (using_dma(hsotg)) {
+		u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15);
+		writel(next, hsotg->regs + S3C_DIEPCTL(epnum));
+		writel(next, hsotg->regs + S3C_DOEPCTL(epnum));
+	}
+}
+
+/**
+ * s3c_hsotg_otgreset - reset the OtG phy block
+ * @hsotg: The host state.
+ *
+ * Power up the phy, set the basic configuration and start the PHY.
+ */
+static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
+{
+	u32 osc;
+
+	writel(0, S3C_PHYPWR);
+	mdelay(1);
+
+	osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
+
+	writel(osc | 0x10, S3C_PHYCLK);
+
+	/* issue a full set of resets to the otg and core */
+
+	writel(S3C_RSTCON_PHY, S3C_RSTCON);
+	udelay(20);	/* at-least 10uS */
+	writel(0, S3C_RSTCON);
+}
+
+
+static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
+{
+	/* unmask subset of endpoint interrupts */
+
+	writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
+	       S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
+	       hsotg->regs + S3C_DIEPMSK);
+
+	writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
+	       S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk,
+	       hsotg->regs + S3C_DOEPMSK);
+
+	writel(0, hsotg->regs + S3C_DAINTMSK);
+
+	if (0) {
+		/* post global nak until we're ready */
+		writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
+		       hsotg->regs + S3C_DCTL);
+	}
+
+	/* setup fifos */
+
+	dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+		 readl(hsotg->regs + S3C_GRXFSIZ),
+		 readl(hsotg->regs + S3C_GNPTXFSIZ));
+
+	s3c_hsotg_init_fifo(hsotg);
+
+	/* set the PLL on, remove the HNP/SRP and set the PHY */
+	writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10),
+	       hsotg->regs + S3C_GUSBCFG);
+
+	writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
+	       hsotg->regs + S3C_GAHBCFG);
+}
+
+static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
+{
+	struct device *dev = hsotg->dev;
+	void __iomem *regs = hsotg->regs;
+	u32 val;
+	int idx;
+
+	dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
+		 readl(regs + S3C_DCFG), readl(regs + S3C_DCTL),
+		 readl(regs + S3C_DIEPMSK));
+
+	dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n",
+		 readl(regs + S3C_GAHBCFG), readl(regs + 0x44));
+
+	dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+		 readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ));
+
+	/* show periodic fifo settings */
+
+	for (idx = 1; idx <= 15; idx++) {
+		val = readl(regs + S3C_DPTXFSIZn(idx));
+		dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
+			 val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
+			 val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
+	}
+
+	for (idx = 0; idx < 15; idx++) {
+		dev_info(dev,
+			 "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
+			 readl(regs + S3C_DIEPCTL(idx)),
+			 readl(regs + S3C_DIEPTSIZ(idx)),
+			 readl(regs + S3C_DIEPDMA(idx)));
+
+		val = readl(regs + S3C_DOEPCTL(idx));
+		dev_info(dev,
+			 "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
+			 idx, readl(regs + S3C_DOEPCTL(idx)),
+			 readl(regs + S3C_DOEPTSIZ(idx)),
+			 readl(regs + S3C_DOEPDMA(idx)));
+
+	}
+
+	dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
+		 readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+}
+
+
+/**
+ * state_show - debugfs: show overall driver and device state.
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the overall state of the hardware and
+ * some general information about each of the endpoints available
+ * to the system.
+ */
+static int state_show(struct seq_file *seq, void *v)
+{
+	struct s3c_hsotg *hsotg = seq->private;
+	void __iomem *regs = hsotg->regs;
+	int idx;
+
+	seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
+		 readl(regs + S3C_DCFG),
+		 readl(regs + S3C_DCTL),
+		 readl(regs + S3C_DSTS));
+
+	seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
+		   readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK));
+
+	seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
+		   readl(regs + S3C_GINTMSK),
+		   readl(regs + S3C_GINTSTS));
+
+	seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
+		   readl(regs + S3C_DAINTMSK),
+		   readl(regs + S3C_DAINT));
+
+	seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
+		   readl(regs + S3C_GNPTXSTS),
+		   readl(regs + S3C_GRXSTSR));
+
+	seq_printf(seq, "\nEndpoint status:\n");
+
+	for (idx = 0; idx < 15; idx++) {
+		u32 in, out;
+
+		in = readl(regs + S3C_DIEPCTL(idx));
+		out = readl(regs + S3C_DOEPCTL(idx));
+
+		seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
+			   idx, in, out);
+
+		in = readl(regs + S3C_DIEPTSIZ(idx));
+		out = readl(regs + S3C_DOEPTSIZ(idx));
+
+		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
+			   in, out);
+
+		seq_printf(seq, "\n");
+	}
+
+	return 0;
+}
+
+static int state_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, state_show, inode->i_private);
+}
+
+static const struct file_operations state_fops = {
+	.owner		= THIS_MODULE,
+	.open		= state_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/**
+ * fifo_show - debugfs: show the fifo information
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * Show the FIFO information for the overall fifo and all the
+ * periodic transmission FIFOs.
+*/
+static int fifo_show(struct seq_file *seq, void *v)
+{
+	struct s3c_hsotg *hsotg = seq->private;
+	void __iomem *regs = hsotg->regs;
+	u32 val;
+	int idx;
+
+	seq_printf(seq, "Non-periodic FIFOs:\n");
+	seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ));
+
+	val = readl(regs + S3C_GNPTXFSIZ);
+	seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
+		   val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT,
+		   val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK);
+
+	seq_printf(seq, "\nPeriodic TXFIFOs:\n");
+
+	for (idx = 1; idx <= 15; idx++) {
+		val = readl(regs + S3C_DPTXFSIZn(idx));
+
+		seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
+			   val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
+			   val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
+	}
+
+	return 0;
+}
+
+static int fifo_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, fifo_show, inode->i_private);
+}
+
+static const struct file_operations fifo_fops = {
+	.owner		= THIS_MODULE,
+	.open		= fifo_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+
+static const char *decode_direction(int is_in)
+{
+	return is_in ? "in" : "out";
+}
+
+/**
+ * ep_show - debugfs: show the state of an endpoint.
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the state of the given endpoint (one is
+ * registered for each available).
+*/
+static int ep_show(struct seq_file *seq, void *v)
+{
+	struct s3c_hsotg_ep *ep = seq->private;
+	struct s3c_hsotg *hsotg = ep->parent;
+	struct s3c_hsotg_req *req;
+	void __iomem *regs = hsotg->regs;
+	int index = ep->index;
+	int show_limit = 15;
+	unsigned long flags;
+
+	seq_printf(seq, "Endpoint index %d, named %s,  dir %s:\n",
+		   ep->index, ep->ep.name, decode_direction(ep->dir_in));
+
+	/* first show the register state */
+
+	seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
+		   readl(regs + S3C_DIEPCTL(index)),
+		   readl(regs + S3C_DOEPCTL(index)));
+
+	seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
+		   readl(regs + S3C_DIEPDMA(index)),
+		   readl(regs + S3C_DOEPDMA(index)));
+
+	seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
+		   readl(regs + S3C_DIEPINT(index)),
+		   readl(regs + S3C_DOEPINT(index)));
+
+	seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
+		   readl(regs + S3C_DIEPTSIZ(index)),
+		   readl(regs + S3C_DOEPTSIZ(index)));
+
+	seq_printf(seq, "\n");
+	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
+	seq_printf(seq, "total_data=%ld\n", ep->total_data);
+
+	seq_printf(seq, "request list (%p,%p):\n",
+		   ep->queue.next, ep->queue.prev);
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (--show_limit < 0) {
+			seq_printf(seq, "not showing more requests...\n");
+			break;
+		}
+
+		seq_printf(seq, "%c req %p: %d bytes @%p, ",
+			   req == ep->req ? '*' : ' ',
+			   req, req->req.length, req->req.buf);
+		seq_printf(seq, "%d done, res %d\n",
+			   req->req.actual, req->req.status);
+	}
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	return 0;
+}
+
+static int ep_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ep_show, inode->i_private);
+}
+
+static const struct file_operations ep_fops = {
+	.owner		= THIS_MODULE,
+	.open		= ep_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/**
+ * s3c_hsotg_create_debug - create debugfs directory and files
+ * @hsotg: The driver state
+ *
+ * Create the debugfs files to allow the user to get information
+ * about the state of the system. The directory name is created
+ * with the same name as the device itself, in case we end up
+ * with multiple blocks in future systems.
+*/
+static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
+{
+	struct dentry *root;
+	unsigned epidx;
+
+	root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
+	hsotg->debug_root = root;
+	if (IS_ERR(root)) {
+		dev_err(hsotg->dev, "cannot create debug root\n");
+		return;
+	}
+
+	/* create general state file */
+
+	hsotg->debug_file = debugfs_create_file("state", 0444, root,
+						hsotg, &state_fops);
+
+	if (IS_ERR(hsotg->debug_file))
+		dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
+
+	hsotg->debug_fifo = debugfs_create_file("fifo", 0444, root,
+						hsotg, &fifo_fops);
+
+	if (IS_ERR(hsotg->debug_fifo))
+		dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
+
+	/* create one file for each endpoint */
+
+	for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
+		struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
+
+		ep->debugfs = debugfs_create_file(ep->name, 0444,
+						  root, ep, &ep_fops);
+
+		if (IS_ERR(ep->debugfs))
+			dev_err(hsotg->dev, "failed to create %s debug file\n",
+				ep->name);
+	}
+}
+
+/**
+ * s3c_hsotg_delete_debug - cleanup debugfs entries
+ * @hsotg: The driver state
+ *
+ * Cleanup (remove) the debugfs files for use on module exit.
+*/
+static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
+{
+	unsigned epidx;
+
+	for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
+		struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
+		debugfs_remove(ep->debugfs);
+	}
+
+	debugfs_remove(hsotg->debug_file);
+	debugfs_remove(hsotg->debug_fifo);
+	debugfs_remove(hsotg->debug_root);
+}
+
+/**
+ * s3c_hsotg_gate - set the hardware gate for the block
+ * @pdev: The device we bound to
+ * @on: On or off.
+ *
+ * Set the hardware gate setting into the block. If we end up on
+ * something other than an S3C64XX, then we might need to change this
+ * to using a platform data callback, or some other mechanism.
+ */
+static void s3c_hsotg_gate(struct platform_device *pdev, bool on)
+{
+	unsigned long flags;
+	u32 others;
+
+	local_irq_save(flags);
+
+	others = __raw_readl(S3C64XX_OTHERS);
+	if (on)
+		others |= S3C64XX_OTHERS_USBMASK;
+	else
+		others &= ~S3C64XX_OTHERS_USBMASK;
+	__raw_writel(others, S3C64XX_OTHERS);
+
+	local_irq_restore(flags);
+}
+
+struct s3c_hsotg_plat s3c_hsotg_default_pdata;
+
+static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
+{
+	struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct s3c_hsotg *hsotg;
+	struct resource *res;
+	int epnum;
+	int ret;
+
+	if (!plat)
+		plat = &s3c_hsotg_default_pdata;
+
+	hsotg = kzalloc(sizeof(struct s3c_hsotg) +
+			sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS,
+			GFP_KERNEL);
+	if (!hsotg) {
+		dev_err(dev, "cannot get memory\n");
+		return -ENOMEM;
+	}
+
+	hsotg->dev = dev;
+	hsotg->plat = plat;
+
+	platform_set_drvdata(pdev, hsotg);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "cannot find register resource 0\n");
+		ret = -EINVAL;
+		goto err_mem;
+	}
+
+	hsotg->regs_res = request_mem_region(res->start, resource_size(res),
+					     dev_name(dev));
+	if (!hsotg->regs_res) {
+		dev_err(dev, "cannot reserve registers\n");
+		ret = -ENOENT;
+		goto err_mem;
+	}
+
+	hsotg->regs = ioremap(res->start, resource_size(res));
+	if (!hsotg->regs) {
+		dev_err(dev, "cannot map registers\n");
+		ret = -ENXIO;
+		goto err_regs_res;
+	}
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "cannot find IRQ\n");
+		goto err_regs;
+	}
+
+	hsotg->irq = ret;
+
+	ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg);
+	if (ret < 0) {
+		dev_err(dev, "cannot claim IRQ\n");
+		goto err_regs;
+	}
+
+	dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
+
+	device_initialize(&hsotg->gadget.dev);
+
+	dev_set_name(&hsotg->gadget.dev, "gadget");
+
+	hsotg->gadget.is_dualspeed = 1;
+	hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
+	hsotg->gadget.name = dev_name(dev);
+
+	hsotg->gadget.dev.parent = dev;
+	hsotg->gadget.dev.dma_mask = dev->dma_mask;
+
+	/* setup endpoint information */
+
+	INIT_LIST_HEAD(&hsotg->gadget.ep_list);
+	hsotg->gadget.ep0 = &hsotg->eps[0].ep;
+
+	/* allocate EP0 request */
+
+	hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps[0].ep,
+						     GFP_KERNEL);
+	if (!hsotg->ctrl_req) {
+		dev_err(dev, "failed to allocate ctrl req\n");
+		goto err_regs;
+	}
+
+	/* reset the system */
+
+	s3c_hsotg_gate(pdev, true);
+
+	s3c_hsotg_otgreset(hsotg);
+	s3c_hsotg_corereset(hsotg);
+	s3c_hsotg_init(hsotg);
+
+	/* initialise the endpoints now the core has been initialised */
+	for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++)
+		s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
+
+	s3c_hsotg_create_debug(hsotg);
+
+	s3c_hsotg_dump(hsotg);
+
+	our_hsotg = hsotg;
+	return 0;
+
+err_regs:
+	iounmap(hsotg->regs);
+
+err_regs_res:
+	release_resource(hsotg->regs_res);
+	kfree(hsotg->regs_res);
+
+err_mem:
+	kfree(hsotg);
+	return ret;
+}
+
+static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
+{
+	struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
+
+	s3c_hsotg_delete_debug(hsotg);
+
+	usb_gadget_unregister_driver(hsotg->driver);
+
+	free_irq(hsotg->irq, hsotg);
+	iounmap(hsotg->regs);
+
+	release_resource(hsotg->regs_res);
+	kfree(hsotg->regs_res);
+
+	s3c_hsotg_gate(pdev, false);
+
+	kfree(hsotg);
+	return 0;
+}
+
+#if 1
+#define s3c_hsotg_suspend NULL
+#define s3c_hsotg_resume NULL
+#endif
+
+static struct platform_driver s3c_hsotg_driver = {
+	.driver		= {
+		.name	= "s3c-hsotg",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c_hsotg_probe,
+	.remove		= __devexit_p(s3c_hsotg_remove),
+	.suspend	= s3c_hsotg_suspend,
+	.resume		= s3c_hsotg_resume,
+};
+
+static int __init s3c_hsotg_modinit(void)
+{
+	return platform_driver_register(&s3c_hsotg_driver);
+}
+
+static void __exit s3c_hsotg_modexit(void)
+{
+	platform_driver_unregister(&s3c_hsotg_driver);
+}
+
+module_init(s3c_hsotg_modinit);
+module_exit(s3c_hsotg_modexit);
+
+MODULE_DESCRIPTION("Samsung S3C USB High-speed/OtG device");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c-hsotg");
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
new file mode 100644
index 00000000000..0f3d22fc030
--- /dev/null
+++ b/drivers/usb/gadget/u_audio.c
@@ -0,0 +1,319 @@
+/*
+ * u_audio.c -- ALSA audio utilities for Gadget stack
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/random.h>
+#include <linux/syscalls.h>
+
+#include "u_audio.h"
+
+/*
+ * This component encapsulates the ALSA devices for USB audio gadget
+ */
+
+#define FILE_PCM_PLAYBACK	"/dev/snd/pcmC0D0p"
+#define FILE_PCM_CAPTURE	"/dev/snd/pcmC0D0c"
+#define FILE_CONTROL		"/dev/snd/controlC0"
+
+static char *fn_play = FILE_PCM_PLAYBACK;
+module_param(fn_play, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_play, "Playback PCM device file name");
+
+static char *fn_cap = FILE_PCM_CAPTURE;
+module_param(fn_cap, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_cap, "Capture PCM device file name");
+
+static char *fn_cntl = FILE_CONTROL;
+module_param(fn_cntl, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_cntl, "Control device file name");
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Some ALSA internal helper functions
+ */
+static int snd_interval_refine_set(struct snd_interval *i, unsigned int val)
+{
+	struct snd_interval t;
+	t.empty = 0;
+	t.min = t.max = val;
+	t.openmin = t.openmax = 0;
+	t.integer = 1;
+	return snd_interval_refine(i, &t);
+}
+
+static int _snd_pcm_hw_param_set(struct snd_pcm_hw_params *params,
+				 snd_pcm_hw_param_t var, unsigned int val,
+				 int dir)
+{
+	int changed;
+	if (hw_is_mask(var)) {
+		struct snd_mask *m = hw_param_mask(params, var);
+		if (val == 0 && dir < 0) {
+			changed = -EINVAL;
+			snd_mask_none(m);
+		} else {
+			if (dir > 0)
+				val++;
+			else if (dir < 0)
+				val--;
+			changed = snd_mask_refine_set(
+					hw_param_mask(params, var), val);
+		}
+	} else if (hw_is_interval(var)) {
+		struct snd_interval *i = hw_param_interval(params, var);
+		if (val == 0 && dir < 0) {
+			changed = -EINVAL;
+			snd_interval_none(i);
+		} else if (dir == 0)
+			changed = snd_interval_refine_set(i, val);
+		else {
+			struct snd_interval t;
+			t.openmin = 1;
+			t.openmax = 1;
+			t.empty = 0;
+			t.integer = 0;
+			if (dir < 0) {
+				t.min = val - 1;
+				t.max = val;
+			} else {
+				t.min = val;
+				t.max = val+1;
+			}
+			changed = snd_interval_refine(i, &t);
+		}
+	} else
+		return -EINVAL;
+	if (changed) {
+		params->cmask |= 1 << var;
+		params->rmask |= 1 << var;
+	}
+	return changed;
+}
+/*-------------------------------------------------------------------------*/
+
+/**
+ * Set default hardware params
+ */
+static int playback_default_hw_params(struct gaudio_snd_dev *snd)
+{
+	struct snd_pcm_substream *substream = snd->substream;
+	struct snd_pcm_hw_params *params;
+	snd_pcm_sframes_t result;
+
+       /*
+	* SNDRV_PCM_ACCESS_RW_INTERLEAVED,
+	* SNDRV_PCM_FORMAT_S16_LE
+	* CHANNELS: 2
+	* RATE: 48000
+	*/
+	snd->access = SNDRV_PCM_ACCESS_RW_INTERLEAVED;
+	snd->format = SNDRV_PCM_FORMAT_S16_LE;
+	snd->channels = 2;
+	snd->rate = 48000;
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	_snd_pcm_hw_params_any(params);
+	_snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_ACCESS,
+			snd->access, 0);
+	_snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_FORMAT,
+			snd->format, 0);
+	_snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_CHANNELS,
+			snd->channels, 0);
+	_snd_pcm_hw_param_set(params, SNDRV_PCM_HW_PARAM_RATE,
+			snd->rate, 0);
+
+	snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
+	snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_HW_PARAMS, params);
+
+	result = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_PREPARE, NULL);
+	if (result < 0) {
+		ERROR(snd->card,
+			"Preparing sound card failed: %d\n", (int)result);
+		kfree(params);
+		return result;
+	}
+
+	/* Store the hardware parameters */
+	snd->access = params_access(params);
+	snd->format = params_format(params);
+	snd->channels = params_channels(params);
+	snd->rate = params_rate(params);
+
+	kfree(params);
+
+	INFO(snd->card,
+		"Hardware params: access %x, format %x, channels %d, rate %d\n",
+		snd->access, snd->format, snd->channels, snd->rate);
+
+	return 0;
+}
+
+/**
+ * Playback audio buffer data by ALSA PCM device
+ */
+static size_t u_audio_playback(struct gaudio *card, void *buf, size_t count)
+{
+	struct gaudio_snd_dev	*snd = &card->playback;
+	struct snd_pcm_substream *substream = snd->substream;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	mm_segment_t old_fs;
+	ssize_t result;
+	snd_pcm_sframes_t frames;
+
+try_again:
+	if (runtime->status->state == SNDRV_PCM_STATE_XRUN ||
+		runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) {
+		result = snd_pcm_kernel_ioctl(substream,
+				SNDRV_PCM_IOCTL_PREPARE, NULL);
+		if (result < 0) {
+			ERROR(card, "Preparing sound card failed: %d\n",
+					(int)result);
+			return result;
+		}
+	}
+
+	frames = bytes_to_frames(runtime, count);
+	old_fs = get_fs();
+	set_fs(KERNEL_DS);
+	result = snd_pcm_lib_write(snd->substream, buf, frames);
+	if (result != frames) {
+		ERROR(card, "Playback error: %d\n", (int)result);
+		set_fs(old_fs);
+		goto try_again;
+	}
+	set_fs(old_fs);
+
+	return 0;
+}
+
+static int u_audio_get_playback_channels(struct gaudio *card)
+{
+	return card->playback.channels;
+}
+
+static int u_audio_get_playback_rate(struct gaudio *card)
+{
+	return card->playback.rate;
+}
+
+/**
+ * Open ALSA PCM and control device files
+ * Initial the PCM or control device
+ */
+static int gaudio_open_snd_dev(struct gaudio *card)
+{
+	struct snd_pcm_file *pcm_file;
+	struct gaudio_snd_dev *snd;
+
+	if (!card)
+		return -ENODEV;
+
+	/* Open control device */
+	snd = &card->control;
+	snd->filp = filp_open(fn_cntl, O_RDWR, 0);
+	if (IS_ERR(snd->filp)) {
+		int ret = PTR_ERR(snd->filp);
+		ERROR(card, "unable to open sound control device file: %s\n",
+				fn_cntl);
+		snd->filp = NULL;
+		return ret;
+	}
+	snd->card = card;
+
+	/* Open PCM playback device and setup substream */
+	snd = &card->playback;
+	snd->filp = filp_open(fn_play, O_WRONLY, 0);
+	if (IS_ERR(snd->filp)) {
+		ERROR(card, "No such PCM playback device: %s\n", fn_play);
+		snd->filp = NULL;
+	}
+	pcm_file = snd->filp->private_data;
+	snd->substream = pcm_file->substream;
+	snd->card = card;
+	playback_default_hw_params(snd);
+
+	/* Open PCM capture device and setup substream */
+	snd = &card->capture;
+	snd->filp = filp_open(fn_cap, O_RDONLY, 0);
+	if (IS_ERR(snd->filp)) {
+		ERROR(card, "No such PCM capture device: %s\n", fn_cap);
+		snd->filp = NULL;
+	}
+	pcm_file = snd->filp->private_data;
+	snd->substream = pcm_file->substream;
+	snd->card = card;
+
+	return 0;
+}
+
+/**
+ * Close ALSA PCM and control device files
+ */
+static int gaudio_close_snd_dev(struct gaudio *gau)
+{
+	struct gaudio_snd_dev	*snd;
+
+	/* Close control device */
+	snd = &gau->control;
+	if (!IS_ERR(snd->filp))
+		filp_close(snd->filp, current->files);
+
+	/* Close PCM playback device and setup substream */
+	snd = &gau->playback;
+	if (!IS_ERR(snd->filp))
+		filp_close(snd->filp, current->files);
+
+	/* Close PCM capture device and setup substream */
+	snd = &gau->capture;
+	if (!IS_ERR(snd->filp))
+		filp_close(snd->filp, current->files);
+
+	return 0;
+}
+
+/**
+ * gaudio_setup - setup ALSA interface and preparing for USB transfer
+ *
+ * This sets up PCM, mixer or MIDI ALSA devices fore USB gadget using.
+ *
+ * Returns negative errno, or zero on success
+ */
+int __init gaudio_setup(struct gaudio *card)
+{
+	int	ret;
+
+	ret = gaudio_open_snd_dev(card);
+	if (ret)
+		ERROR(card, "we need at least one control device\n");
+
+	return ret;
+
+}
+
+/**
+ * gaudio_cleanup - remove ALSA device interface
+ *
+ * This is called to free all resources allocated by @gaudio_setup().
+ */
+void gaudio_cleanup(struct gaudio *card)
+{
+	if (card)
+		gaudio_close_snd_dev(card);
+}
+
diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h
new file mode 100644
index 00000000000..cc8d159c648
--- /dev/null
+++ b/drivers/usb/gadget/u_audio.h
@@ -0,0 +1,56 @@
+/*
+ * u_audio.h -- interface to USB gadget "ALSA AUDIO" utilities
+ *
+ * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ * Copyright (C) 2008 Analog Devices, Inc
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __U_AUDIO_H
+#define __U_AUDIO_H
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/composite.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "gadget_chips.h"
+
+/*
+ * This represents the USB side of an audio card device, managed by a USB
+ * function which provides control and stream interfaces.
+ */
+
+struct gaudio_snd_dev {
+	struct gaudio			*card;
+	struct file			*filp;
+	struct snd_pcm_substream	*substream;
+	int				access;
+	int				format;
+	int				channels;
+	int				rate;
+};
+
+struct gaudio {
+	struct usb_function		func;
+	struct usb_gadget		*gadget;
+
+	/* ALSA sound device interfaces */
+	struct gaudio_snd_dev		control;
+	struct gaudio_snd_dev		playback;
+	struct gaudio_snd_dev		capture;
+
+	/* TODO */
+};
+
+int gaudio_setup(struct gaudio *card);
+void gaudio_cleanup(struct gaudio *card);
+
+#endif /* __U_AUDIO_H */
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 4007770f7ed..016f63b3902 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -520,7 +520,7 @@ static int eth_start_xmit(struct sk_buff *skb, struct net_device *net)
 	 */
 	if (list_empty(&dev->tx_reqs)) {
 		spin_unlock_irqrestore(&dev->req_lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 
 	req = container_of(dev->tx_reqs.next, struct usb_request, list);
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 0a4d99ab40d..fc6e709f45b 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -371,6 +371,7 @@ __acquires(&port->port_lock)
 
 		req->length = len;
 		list_del(&req->list);
+		req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
 
 		pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
 				port->port_num, len, *((u8 *)req->buf),
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 845479f7c70..1576a0520ad 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -17,6 +17,26 @@ config USB_C67X00_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called c67x00.
 
+config USB_XHCI_HCD
+	tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)"
+	depends on USB && PCI && EXPERIMENTAL
+	---help---
+	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+	  "SuperSpeed" host controller hardware.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xhci-hcd.
+
+config USB_XHCI_HCD_DEBUGGING
+	bool "Debugging for the xHCI host controller"
+	depends on USB_XHCI_HCD
+	---help---
+	  Say 'Y' to turn on debugging for the xHCI host controller driver.
+	  This will spew debugging output, even in interrupt context.
+	  This should only be used for debugging xHCI driver bugs.
+
+	  If unsure, say N.
+
 config USB_EHCI_HCD
 	tristate "EHCI HCD (USB 2.0) support"
 	depends on USB && USB_ARCH_HAS_EHCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index f163571e33d..289d748bb41 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -12,6 +12,7 @@ fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
 ifeq ($(CONFIG_FHCI_DEBUG),y)
 fhci-objs += fhci-dbg.o
 endif
+xhci-objs := xhci-hcd.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
@@ -23,6 +24,7 @@ obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
+obj-$(CONFIG_USB_XHCI_HCD)	+= xhci.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index bf69f473910..c3a778bd359 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -97,6 +97,7 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 01c3da34f67..bf86809c512 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -309,6 +309,7 @@ static const struct hc_driver ehci_fsl_hc_driver = {
 	.urb_enqueue = ehci_urb_enqueue,
 	.urb_dequeue = ehci_urb_dequeue,
 	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c637207a1c8..2b72473544d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1024,6 +1024,51 @@ done:
 	return;
 }
 
+static void
+ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct ehci_qh		*qh;
+	int			eptype = usb_endpoint_type(&ep->desc);
+
+	if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
+		return;
+
+ rescan:
+	spin_lock_irq(&ehci->lock);
+	qh = ep->hcpriv;
+
+	/* For Bulk and Interrupt endpoints we maintain the toggle state
+	 * in the hardware; the toggle bits in udev aren't used at all.
+	 * When an endpoint is reset by usb_clear_halt() we must reset
+	 * the toggle bit in the QH.
+	 */
+	if (qh) {
+		if (!list_empty(&qh->qtd_list)) {
+			WARN_ONCE(1, "clear_halt for a busy endpoint\n");
+		} else if (qh->qh_state == QH_STATE_IDLE) {
+			qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+		} else {
+			/* It's not safe to write into the overlay area
+			 * while the QH is active.  Unlink it first and
+			 * wait for the unlink to complete.
+			 */
+			if (qh->qh_state == QH_STATE_LINKED) {
+				if (eptype == USB_ENDPOINT_XFER_BULK) {
+					unlink_async(ehci, qh);
+				} else {
+					intr_deschedule(ehci, qh);
+					(void) qh_schedule(ehci, qh);
+				}
+			}
+			spin_unlock_irq(&ehci->lock);
+			schedule_timeout_uninterruptible(1);
+			goto rescan;
+		}
+	}
+	spin_unlock_irq(&ehci->lock);
+}
+
 static int ehci_get_frame (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
@@ -1097,7 +1142,7 @@ static int __init ehci_hcd_init(void)
 		 sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
 
 #ifdef DEBUG
-	ehci_debug_root = debugfs_create_dir("ehci", NULL);
+	ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
 	if (!ehci_debug_root) {
 		retval = -ENOENT;
 		goto err_debug;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 97a53a48a3d..f46ad27c9a9 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -391,7 +391,7 @@ static inline void create_companion_file(struct ehci_hcd *ehci)
 
 	/* with integrated TT there is no companion! */
 	if (!ehci_is_TDI(ehci))
-		i = device_create_file(ehci_to_hcd(ehci)->self.dev,
+		i = device_create_file(ehci_to_hcd(ehci)->self.controller,
 				       &dev_attr_companion);
 }
 
@@ -399,7 +399,7 @@ static inline void remove_companion_file(struct ehci_hcd *ehci)
 {
 	/* with integrated TT there is no companion! */
 	if (!ehci_is_TDI(ehci))
-		device_remove_file(ehci_to_hcd(ehci)->self.dev,
+		device_remove_file(ehci_to_hcd(ehci)->self.controller,
 				   &dev_attr_companion);
 }
 
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index 9c32063a0c2..a44bb4a9495 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -51,6 +51,7 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = {
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
 	.get_frame_number	= ehci_get_frame,
 	.hub_status_data	= ehci_hub_status_data,
 	.hub_control		= ehci_hub_control,
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 9d487908012..770dd9aba62 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -149,6 +149,7 @@ static const struct hc_driver ehci_orion_hc_driver = {
 	.urb_enqueue = ehci_urb_enqueue,
 	.urb_dequeue = ehci_urb_dequeue,
 	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
@@ -187,7 +188,7 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
 	}
 }
 
-static int __init ehci_orion_drv_probe(struct platform_device *pdev)
+static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
 {
 	struct orion_ehci_data *pd = pdev->dev.platform_data;
 	struct resource *res;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 5aa8bce90e1..f3683e1da16 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -268,7 +268,7 @@ done:
  * Also they depend on separate root hub suspend/resume.
  */
 
-static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
+static int ehci_pci_suspend(struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	unsigned long		flags;
@@ -293,12 +293,6 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
-	/* make sure snapshot being resumed re-enumerates everything */
-	if (message.event == PM_EVENT_PRETHAW) {
-		ehci_halt(ehci);
-		ehci_reset(ehci);
-	}
-
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
  bail:
 	spin_unlock_irqrestore (&ehci->lock, flags);
@@ -309,7 +303,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 	return rc;
 }
 
-static int ehci_pci_resume(struct usb_hcd *hcd)
+static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
@@ -322,10 +316,12 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
 	/* Mark hardware accessible again as we are out of D3 state by now */
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-	/* If CF is still set, we maintained PCI Vaux power.
+	/* If CF is still set and we aren't resuming from hibernation
+	 * then we maintained PCI Vaux power.
 	 * Just undo the effect of ehci_pci_suspend().
 	 */
-	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
+				!hibernated) {
 		int	mask = INTR_MASK;
 
 		if (!hcd->self.root_hub->do_remote_wakeup)
@@ -335,7 +331,6 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
 		return 0;
 	}
 
-	ehci_dbg(ehci, "lost power, restarting\n");
 	usb_root_hub_lost_power(hcd->self.root_hub);
 
 	/* Else reset, to cope with power loss or flush-to-storage
@@ -393,6 +388,7 @@ static const struct hc_driver ehci_pci_hc_driver = {
 	.urb_enqueue =		ehci_urb_enqueue,
 	.urb_dequeue =		ehci_urb_dequeue,
 	.endpoint_disable =	ehci_endpoint_disable,
+	.endpoint_reset =	ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
@@ -429,10 +425,11 @@ static struct pci_driver ehci_pci_driver = {
 
 	.probe =	usb_hcd_pci_probe,
 	.remove =	usb_hcd_pci_remove,
+	.shutdown = 	usb_hcd_pci_shutdown,
 
-#ifdef	CONFIG_PM
-	.suspend =	usb_hcd_pci_suspend,
-	.resume =	usb_hcd_pci_resume,
+#ifdef CONFIG_PM_SLEEP
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
 #endif
-	.shutdown = 	usb_hcd_pci_shutdown,
 };
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index ef732b704f5..fbd272288fc 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -61,6 +61,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 1ba9f9a8c30..eecd2a0680a 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -65,6 +65,7 @@ static const struct hc_driver ps3_ehci_hc_driver = {
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
 	.get_frame_number	= ehci_get_frame,
 	.hub_status_data	= ehci_hub_status_data,
 	.hub_control		= ehci_hub_control,
@@ -162,7 +163,7 @@ static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
 	dev_dbg(&dev->core, "%s:%d: virq            %lu\n", __func__, __LINE__,
 		(unsigned long)virq);
 
-	ps3_system_bus_set_driver_data(dev, hcd);
+	ps3_system_bus_set_drvdata(dev, hcd);
 
 	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
 
@@ -195,8 +196,7 @@ fail_start:
 static int ps3_ehci_remove(struct ps3_system_bus_device *dev)
 {
 	unsigned int tmp;
-	struct usb_hcd *hcd =
-		(struct usb_hcd *)ps3_system_bus_get_driver_data(dev);
+	struct usb_hcd *hcd = ps3_system_bus_get_drvdata(dev);
 
 	BUG_ON(!hcd);
 
@@ -208,7 +208,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev)
 	ehci_shutdown(hcd);
 	usb_remove_hcd(hcd);
 
-	ps3_system_bus_set_driver_data(dev, NULL);
+	ps3_system_bus_set_drvdata(dev, NULL);
 
 	BUG_ON(!hcd->regs);
 	iounmap(hcd->regs);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 1976b1b3778..3192f683f80 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -93,22 +93,6 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
 	qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
 	qh->hw_alt_next = EHCI_LIST_END(ehci);
 
-	/* Except for control endpoints, we make hardware maintain data
-	 * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
-	 * and set the pseudo-toggle in udev. Only usb_clear_halt() will
-	 * ever clear it.
-	 */
-	if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
-		unsigned	is_out, epnum;
-
-		is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
-		epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
-		if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
-			qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
-			usb_settoggle (qh->dev, epnum, is_out, 1);
-		}
-	}
-
 	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
 	wmb ();
 	qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -850,7 +834,6 @@ done:
 	qh->qh_state = QH_STATE_IDLE;
 	qh->hw_info1 = cpu_to_hc32(ehci, info1);
 	qh->hw_info2 = cpu_to_hc32(ehci, info2);
-	usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
 	qh_refresh (ehci, qh);
 	return qh;
 }
@@ -881,7 +864,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		}
 	}
 
-	/* clear halt and/or toggle; and maybe recover from silicon quirk */
+	/* clear halt and maybe recover from silicon quirk */
 	if (qh->qh_state == QH_STATE_IDLE)
 		qh_refresh (ehci, qh);
 
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 556d0ec0c1f..9d1babc7ff6 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -760,8 +760,10 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	if (status) {
 		/* "normal" case, uframing flexible except with splits */
 		if (qh->period) {
-			frame = qh->period - 1;
-			do {
+			int		i;
+
+			for (i = qh->period; status && i > 0; --i) {
+				frame = ++ehci->random_frame % qh->period;
 				for (uframe = 0; uframe < 8; uframe++) {
 					status = check_intr_schedule (ehci,
 							frame, uframe, qh,
@@ -769,7 +771,7 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh)
 					if (status == 0)
 						break;
 				}
-			} while (status && frame--);
+			}
 
 		/* qh->period == 0 means every uframe */
 		} else {
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 6cff195e1a3..90ad3395bb2 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -116,6 +116,7 @@ struct ehci_hcd {			/* one per controller */
 	struct timer_list	watchdog;
 	unsigned long		actions;
 	unsigned		stamp;
+	unsigned		random_frame;
 	unsigned long		next_statechange;
 	u32			command;
 
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
index ea8a4255c5d..e799f86dab1 100644
--- a/drivers/usb/host/fhci-dbg.c
+++ b/drivers/usb/host/fhci-dbg.c
@@ -108,7 +108,7 @@ void fhci_dfs_create(struct fhci_hcd *fhci)
 {
 	struct device *dev = fhci_to_hcd(fhci)->self.controller;
 
-	fhci->dfs_root = debugfs_create_dir(dev_name(dev), NULL);
+	fhci->dfs_root = debugfs_create_dir(dev_name(dev), usb_debug_root);
 	if (!fhci->dfs_root) {
 		WARN_ON(1);
 		return;
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index cbf30e515f2..88b03214622 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -172,25 +172,6 @@ error_cluster_id_get:
 
 }
 
-static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg)
-{
-	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
-	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-	dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__,
-		usb_hcd, hwahc, *(unsigned long *) &msg);
-	return -ENOSYS;
-}
-
-static int hwahc_op_resume(struct usb_hcd *usb_hcd)
-{
-	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
-	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
-
-	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
-		usb_hcd, hwahc);
-	return -ENOSYS;
-}
-
 /*
  * No need to abort pipes, as when this is called, all the children
  * has been disconnected and that has done it [through
@@ -598,8 +579,6 @@ static struct hc_driver hwahc_hc_driver = {
 	.flags = HCD_USB2,		/* FIXME */
 	.reset = hwahc_op_reset,
 	.start = hwahc_op_start,
-	.pci_suspend = hwahc_op_suspend,
-	.pci_resume = hwahc_op_resume,
 	.stop = hwahc_op_stop,
 	.get_frame_number = hwahc_op_get_frame_number,
 	.urb_enqueue = hwahc_op_urb_enqueue,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index d3269656aa4..811f5dfdc58 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -431,7 +431,7 @@ static struct dentry *ohci_debug_root;
 
 struct debug_buffer {
 	ssize_t (*fill_func)(struct debug_buffer *);	/* fill method */
-	struct device *dev;
+	struct ohci_hcd *ohci;
 	struct mutex mutex;	/* protect filling of buffer */
 	size_t count;		/* number of characters filled into buffer */
 	char *page;
@@ -505,15 +505,11 @@ show_list (struct ohci_hcd *ohci, char *buf, size_t count, struct ed *ed)
 
 static ssize_t fill_async_buffer(struct debug_buffer *buf)
 {
-	struct usb_bus		*bus;
-	struct usb_hcd		*hcd;
 	struct ohci_hcd		*ohci;
 	size_t			temp;
 	unsigned long		flags;
 
-	bus = dev_get_drvdata(buf->dev);
-	hcd = bus_to_hcd(bus);
-	ohci = hcd_to_ohci(hcd);
+	ohci = buf->ohci;
 
 	/* display control and bulk lists together, for simplicity */
 	spin_lock_irqsave (&ohci->lock, flags);
@@ -529,8 +525,6 @@ static ssize_t fill_async_buffer(struct debug_buffer *buf)
 
 static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 {
-	struct usb_bus		*bus;
-	struct usb_hcd		*hcd;
 	struct ohci_hcd		*ohci;
 	struct ed		**seen, *ed;
 	unsigned long		flags;
@@ -542,9 +536,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 		return 0;
 	seen_count = 0;
 
-	bus = (struct usb_bus *)dev_get_drvdata(buf->dev);
-	hcd = bus_to_hcd(bus);
-	ohci = hcd_to_ohci(hcd);
+	ohci = buf->ohci;
 	next = buf->page;
 	size = PAGE_SIZE;
 
@@ -626,7 +618,6 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 
 static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 {
-	struct usb_bus		*bus;
 	struct usb_hcd		*hcd;
 	struct ohci_hcd		*ohci;
 	struct ohci_regs __iomem *regs;
@@ -635,9 +626,8 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 	char			*next;
 	u32			rdata;
 
-	bus = (struct usb_bus *)dev_get_drvdata(buf->dev);
-	hcd = bus_to_hcd(bus);
-	ohci = hcd_to_ohci(hcd);
+	ohci = buf->ohci;
+	hcd = ohci_to_hcd(ohci);
 	regs = ohci->regs;
 	next = buf->page;
 	size = PAGE_SIZE;
@@ -710,7 +700,7 @@ done:
 	return PAGE_SIZE - size;
 }
 
-static struct debug_buffer *alloc_buffer(struct device *dev,
+static struct debug_buffer *alloc_buffer(struct ohci_hcd *ohci,
 				ssize_t (*fill_func)(struct debug_buffer *))
 {
 	struct debug_buffer *buf;
@@ -718,7 +708,7 @@ static struct debug_buffer *alloc_buffer(struct device *dev,
 	buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
 
 	if (buf) {
-		buf->dev = dev;
+		buf->ohci = ohci;
 		buf->fill_func = fill_func;
 		mutex_init(&buf->mutex);
 	}
@@ -810,26 +800,25 @@ static int debug_registers_open(struct inode *inode, struct file *file)
 static inline void create_debug_files (struct ohci_hcd *ohci)
 {
 	struct usb_bus *bus = &ohci_to_hcd(ohci)->self;
-	struct device *dev = bus->dev;
 
 	ohci->debug_dir = debugfs_create_dir(bus->bus_name, ohci_debug_root);
 	if (!ohci->debug_dir)
 		goto dir_error;
 
 	ohci->debug_async = debugfs_create_file("async", S_IRUGO,
-						ohci->debug_dir, dev,
+						ohci->debug_dir, ohci,
 						&debug_async_fops);
 	if (!ohci->debug_async)
 		goto async_error;
 
 	ohci->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
-						   ohci->debug_dir, dev,
+						   ohci->debug_dir, ohci,
 						   &debug_periodic_fops);
 	if (!ohci->debug_periodic)
 		goto periodic_error;
 
 	ohci->debug_registers = debugfs_create_file("registers", S_IRUGO,
-						    ohci->debug_dir, dev,
+						    ohci->debug_dir, ohci,
 						    &debug_registers_fops);
 	if (!ohci->debug_registers)
 		goto registers_error;
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 7cf74f8c2db..b0dbf4157d2 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 	struct usb_hcd *hcd;
 
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		dbg("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
 	}
 
@@ -65,12 +65,18 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (hcd->regs == NULL) {
-		pr_debug("ioremap failed");
+		dbg("ioremap failed");
 		retval = -ENOMEM;
 		goto err2;
 	}
 
-	usb_host_clock = clk_get(&pdev->dev, "usb_host");
+	usb_host_clock = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(usb_host_clock)) {
+		dbg("clk_get failed");
+		retval = PTR_ERR(usb_host_clock);
+		goto err3;
+	}
+
 	ep93xx_start_hc(&pdev->dev);
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -80,6 +86,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 		return retval;
 
 	ep93xx_stop_hc(&pdev->dev);
+err3:
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 25db704f3a2..58151687d35 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -571,7 +571,7 @@ static int ohci_init (struct ohci_hcd *ohci)
  */
 static int ohci_run (struct ohci_hcd *ohci)
 {
-	u32			mask, temp;
+	u32			mask, val;
 	int			first = ohci->fminterval == 0;
 	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
 
@@ -580,8 +580,8 @@ static int ohci_run (struct ohci_hcd *ohci)
 	/* boot firmware should have set this up (5.1.1.3.1) */
 	if (first) {
 
-		temp = ohci_readl (ohci, &ohci->regs->fminterval);
-		ohci->fminterval = temp & 0x3fff;
+		val = ohci_readl (ohci, &ohci->regs->fminterval);
+		ohci->fminterval = val & 0x3fff;
 		if (ohci->fminterval != FI)
 			ohci_dbg (ohci, "fminterval delta %d\n",
 				ohci->fminterval - FI);
@@ -600,25 +600,25 @@ static int ohci_run (struct ohci_hcd *ohci)
 
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 	case OHCI_USB_OPER:
-		temp = 0;
+		val = 0;
 		break;
 	case OHCI_USB_SUSPEND:
 	case OHCI_USB_RESUME:
 		ohci->hc_control &= OHCI_CTRL_RWC;
 		ohci->hc_control |= OHCI_USB_RESUME;
-		temp = 10 /* msec wait */;
+		val = 10 /* msec wait */;
 		break;
 	// case OHCI_USB_RESET:
 	default:
 		ohci->hc_control &= OHCI_CTRL_RWC;
 		ohci->hc_control |= OHCI_USB_RESET;
-		temp = 50 /* msec wait */;
+		val = 50 /* msec wait */;
 		break;
 	}
 	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 	// flush the writes
 	(void) ohci_readl (ohci, &ohci->regs->control);
-	msleep(temp);
+	msleep(val);
 
 	memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
 
@@ -628,9 +628,9 @@ static int ohci_run (struct ohci_hcd *ohci)
 retry:
 	/* HC Reset requires max 10 us delay */
 	ohci_writel (ohci, OHCI_HCR,  &ohci->regs->cmdstatus);
-	temp = 30;	/* ... allow extra time */
+	val = 30;	/* ... allow extra time */
 	while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
-		if (--temp == 0) {
+		if (--val == 0) {
 			spin_unlock_irq (&ohci->lock);
 			ohci_err (ohci, "USB HC reset timed out!\n");
 			return -1;
@@ -699,23 +699,23 @@ retry:
 	ohci_writel (ohci, mask, &ohci->regs->intrenable);
 
 	/* handle root hub init quirks ... */
-	temp = roothub_a (ohci);
-	temp &= ~(RH_A_PSM | RH_A_OCPM);
+	val = roothub_a (ohci);
+	val &= ~(RH_A_PSM | RH_A_OCPM);
 	if (ohci->flags & OHCI_QUIRK_SUPERIO) {
 		/* NSC 87560 and maybe others */
-		temp |= RH_A_NOCP;
-		temp &= ~(RH_A_POTPGT | RH_A_NPS);
-		ohci_writel (ohci, temp, &ohci->regs->roothub.a);
+		val |= RH_A_NOCP;
+		val &= ~(RH_A_POTPGT | RH_A_NPS);
+		ohci_writel (ohci, val, &ohci->regs->roothub.a);
 	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
 			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 		/* hub power always on; required for AMD-756 and some
 		 * Mac platforms.  ganged overcurrent reporting, if any.
 		 */
-		temp |= RH_A_NPS;
-		ohci_writel (ohci, temp, &ohci->regs->roothub.a);
+		val |= RH_A_NPS;
+		ohci_writel (ohci, val, &ohci->regs->roothub.a);
 	}
 	ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
-	ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
+	ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
 						&ohci->regs->roothub.b);
 	// flush those writes
 	(void) ohci_readl (ohci, &ohci->regs->control);
@@ -724,7 +724,7 @@ retry:
 	spin_unlock_irq (&ohci->lock);
 
 	// POTPGT delay is bits 24-31, in 2 ms units.
-	mdelay ((temp >> 23) & 0x1fe);
+	mdelay ((val >> 23) & 0x1fe);
 	hcd->state = HC_STATE_RUNNING;
 
 	if (quirk_zfmicro(ohci)) {
@@ -1105,7 +1105,7 @@ static int __init ohci_hcd_mod_init(void)
 	set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
 
 #ifdef DEBUG
-	ohci_debug_root = debugfs_create_dir("ohci", NULL);
+	ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root);
 	if (!ohci_debug_root) {
 		retval = -ENOENT;
 		goto error_debug;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index f9961b4c0da..d2ba04dd785 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -372,7 +372,7 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd)
 
 #ifdef	CONFIG_PM
 
-static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
+static int ohci_pci_suspend(struct usb_hcd *hcd)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
 	unsigned long	flags;
@@ -394,10 +394,6 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
 	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 	(void)ohci_readl(ohci, &ohci->regs->intrdisable);
 
-	/* make sure snapshot being resumed re-enumerates everything */
-	if (message.event == PM_EVENT_PRETHAW)
-		ohci_usb_reset(ohci);
-
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
  bail:
 	spin_unlock_irqrestore (&ohci->lock, flags);
@@ -406,9 +402,14 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
 }
 
 
-static int ohci_pci_resume (struct usb_hcd *hcd)
+static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 {
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* Make sure resume from hibernation re-enumerates everything */
+	if (hibernated)
+		ohci_usb_reset(hcd_to_ohci(hcd));
+
 	ohci_finish_controller_resume(hcd);
 	return 0;
 }
@@ -484,12 +485,11 @@ static struct pci_driver ohci_pci_driver = {
 
 	.probe =	usb_hcd_pci_probe,
 	.remove =	usb_hcd_pci_remove,
+	.shutdown =	usb_hcd_pci_shutdown,
 
-#ifdef	CONFIG_PM
-	.suspend =	usb_hcd_pci_suspend,
-	.resume =	usb_hcd_pci_resume,
+#ifdef CONFIG_PM_SLEEP
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
 #endif
-
-	.shutdown =	usb_hcd_pci_shutdown,
 };
-
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 3d191031732..1d56259c5db 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -162,7 +162,7 @@ static int ps3_ohci_probe(struct ps3_system_bus_device *dev)
 	dev_dbg(&dev->core, "%s:%d: virq            %lu\n", __func__, __LINE__,
 		(unsigned long)virq);
 
-	ps3_system_bus_set_driver_data(dev, hcd);
+	ps3_system_bus_set_drvdata(dev, hcd);
 
 	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
 
@@ -195,8 +195,7 @@ fail_start:
 static int ps3_ohci_remove(struct ps3_system_bus_device *dev)
 {
 	unsigned int tmp;
-	struct usb_hcd *hcd =
-		(struct usb_hcd *)ps3_system_bus_get_driver_data(dev);
+	struct usb_hcd *hcd = ps3_system_bus_get_drvdata(dev);
 
 	BUG_ON(!hcd);
 
@@ -208,7 +207,7 @@ static int ps3_ohci_remove(struct ps3_system_bus_device *dev)
 	ohci_shutdown(hcd);
 	usb_remove_hcd(hcd);
 
-	ps3_system_bus_set_driver_data(dev, NULL);
+	ps3_system_bus_set_drvdata(dev, NULL);
 
 	BUG_ON(!hcd->regs);
 	iounmap(hcd->regs);
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 033c2846ce5..83b5f9cea85 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/acpi.h>
 #include "pci-quirks.h"
+#include "xhci-ext-caps.h"
 
 
 #define UHCI_USBLEGSUP		0xc0		/* legacy support */
@@ -341,7 +342,127 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 	return;
 }
 
+/*
+ * handshake - spin reading a register until handshake completes
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @wait_usec: timeout in microseconds
+ * @delay_usec: delay in microseconds to wait between polling
+ *
+ * Polls a register every delay_usec microseconds.
+ * Returns 0 when the mask bits have the value done.
+ * Returns -ETIMEDOUT if this condition is not true after
+ * wait_usec microseconds have passed.
+ */
+static int handshake(void __iomem *ptr, u32 mask, u32 done,
+		int wait_usec, int delay_usec)
+{
+	u32	result;
+
+	do {
+		result = readl(ptr);
+		result &= mask;
+		if (result == done)
+			return 0;
+		udelay(delay_usec);
+		wait_usec -= delay_usec;
+	} while (wait_usec > 0);
+	return -ETIMEDOUT;
+}
+
+/**
+ * PCI Quirks for xHCI.
+ *
+ * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
+ * It signals to the BIOS that the OS wants control of the host controller,
+ * and then waits 5 seconds for the BIOS to hand over control.
+ * If we timeout, assume the BIOS is broken and take control anyway.
+ */
+static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
+{
+	void __iomem *base;
+	int ext_cap_offset;
+	void __iomem *op_reg_base;
+	u32 val;
+	int timeout;
+
+	if (!mmio_resource_enabled(pdev, 0))
+		return;
+
+	base = ioremap_nocache(pci_resource_start(pdev, 0),
+				pci_resource_len(pdev, 0));
+	if (base == NULL)
+		return;
 
+	/*
+	 * Find the Legacy Support Capability register -
+	 * this is optional for xHCI host controllers.
+	 */
+	ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
+	do {
+		if (!ext_cap_offset)
+			/* We've reached the end of the extended capabilities */
+			goto hc_init;
+		val = readl(base + ext_cap_offset);
+		if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
+			break;
+		ext_cap_offset = xhci_find_next_cap_offset(base, ext_cap_offset);
+	} while (1);
+
+	/* If the BIOS owns the HC, signal that the OS wants it, and wait */
+	if (val & XHCI_HC_BIOS_OWNED) {
+		writel(val & XHCI_HC_OS_OWNED, base + ext_cap_offset);
+
+		/* Wait for 5 seconds with 10 microsecond polling interval */
+		timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
+				0, 5000, 10);
+
+		/* Assume a buggy BIOS and take HC ownership anyway */
+		if (timeout) {
+			dev_warn(&pdev->dev, "xHCI BIOS handoff failed"
+					" (BIOS bug ?) %08x\n", val);
+			writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
+		}
+	}
+
+	/* Disable any BIOS SMIs */
+	writel(XHCI_LEGACY_DISABLE_SMI,
+			base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+
+hc_init:
+	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
+
+	/* Wait for the host controller to be ready before writing any
+	 * operational or runtime registers.  Wait 5 seconds and no more.
+	 */
+	timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
+			5000, 10);
+	/* Assume a buggy HC and start HC initialization anyway */
+	if (timeout) {
+		val = readl(op_reg_base + XHCI_STS_OFFSET);
+		dev_warn(&pdev->dev,
+				"xHCI HW not ready after 5 sec (HC bug?) "
+				"status = 0x%x\n", val);
+	}
+
+	/* Send the halt and disable interrupts command */
+	val = readl(op_reg_base + XHCI_CMD_OFFSET);
+	val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
+	writel(val, op_reg_base + XHCI_CMD_OFFSET);
+
+	/* Wait for the HC to halt - poll every 125 usec (one microframe). */
+	timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
+			XHCI_MAX_HALT_USEC, 125);
+	if (timeout) {
+		val = readl(op_reg_base + XHCI_STS_OFFSET);
+		dev_warn(&pdev->dev,
+				"xHCI HW did not halt within %d usec "
+				"status = 0x%x\n", XHCI_MAX_HALT_USEC, val);
+	}
+
+	iounmap(base);
+}
 
 static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 {
@@ -351,5 +472,7 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 		quirk_usb_handoff_ohci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
 		quirk_usb_disable_ehci(pdev);
+	else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
+		quirk_usb_handoff_xhci(pdev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index f1626e58c14..56976cc0352 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -46,31 +46,10 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Yoshihiro Shimoda");
 MODULE_ALIAS("platform:r8a66597_hcd");
 
-#define DRIVER_VERSION	"10 Apr 2008"
+#define DRIVER_VERSION	"2009-05-26"
 
 static const char hcd_name[] = "r8a66597_hcd";
 
-/* module parameters */
-#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-static unsigned short clock = XTAL12;
-module_param(clock, ushort, 0644);
-MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
-		"(default=0)");
-#endif
-
-static unsigned short vif = LDRV;
-module_param(vif, ushort, 0644);
-MODULE_PARM_DESC(vif, "input VIF: 3.3V=32768, 1.5V=0(default=32768)");
-
-static unsigned short endian;
-module_param(endian, ushort, 0644);
-MODULE_PARM_DESC(endian, "data endian: big=256, little=0 (default=0)");
-
-static unsigned short irq_sense = 0xff;
-module_param(irq_sense, ushort, 0644);
-MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=32, falling edge=0 "
-		"(default=32)");
-
 static void packet_write(struct r8a66597 *r8a66597, u16 pipenum);
 static int r8a66597_get_frame(struct usb_hcd *hcd);
 
@@ -136,7 +115,8 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 		}
 	} while ((tmp & USBE) != USBE);
 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
-	r8a66597_mdfy(r8a66597, clock, XTAL, SYSCFG0);
+	r8a66597_mdfy(r8a66597, get_xtal_from_pdata(r8a66597->pdata), XTAL,
+			SYSCFG0);
 
 	i = 0;
 	r8a66597_bset(r8a66597, XCKE, SYSCFG0);
@@ -203,6 +183,9 @@ static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
 static int enable_controller(struct r8a66597 *r8a66597)
 {
 	int ret, port;
+	u16 vif = r8a66597->pdata->vif ? LDRV : 0;
+	u16 irq_sense = r8a66597->irq_sense_low ? INTL : 0;
+	u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
 
 	ret = r8a66597_clock_enable(r8a66597);
 	if (ret < 0)
@@ -2373,7 +2356,7 @@ static int __init_or_module r8a66597_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __init r8a66597_probe(struct platform_device *pdev)
+static int __devinit r8a66597_probe(struct platform_device *pdev)
 {
 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
 	char clk_name[8];
@@ -2418,6 +2401,12 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 		goto clean_up;
 	}
 
+	if (pdev->dev.platform_data == NULL) {
+		dev_err(&pdev->dev, "no platform data\n");
+		ret = -ENODEV;
+		goto clean_up;
+	}
+
 	/* initialize hcd */
 	hcd = usb_create_hcd(&r8a66597_hc_driver, &pdev->dev, (char *)hcd_name);
 	if (!hcd) {
@@ -2428,6 +2417,8 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597 = hcd_to_r8a66597(hcd);
 	memset(r8a66597, 0, sizeof(struct r8a66597));
 	dev_set_drvdata(&pdev->dev, r8a66597);
+	r8a66597->pdata = pdev->dev.platform_data;
+	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
 	snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
@@ -2458,29 +2449,6 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 
 	hcd->rsrc_start = res->start;
 
-	/* irq_sense setting on cmdline takes precedence over resource
-	 * settings, so the introduction of irqflags in IRQ resourse
-	 * won't disturb existing setups */
-	switch (irq_sense) {
-		case INTL:
-			irq_trigger = IRQF_TRIGGER_LOW;
-			break;
-		case 0:
-			irq_trigger = IRQF_TRIGGER_FALLING;
-			break;
-		case 0xff:
-			if (irq_trigger)
-				irq_sense = (irq_trigger & IRQF_TRIGGER_LOW) ?
-					    INTL : 0;
-			else {
-				irq_sense = INTL;
-				irq_trigger = IRQF_TRIGGER_LOW;
-			}
-			break;
-		default:
-			dev_err(&pdev->dev, "Unknown irq_sense value.\n");
-	}
-
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd\n");
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index f49208f1bb7..d72680b433f 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -30,6 +30,8 @@
 #include <linux/clk.h>
 #endif
 
+#include <linux/usb/r8a66597.h>
+
 #define SYSCFG0		0x00
 #define SYSCFG1		0x02
 #define SYSSTS0		0x04
@@ -488,6 +490,7 @@ struct r8a66597 {
 #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
 	struct clk *clk;
 #endif
+	struct r8a66597_platdata	*pdata;
 	struct r8a66597_device		device0;
 	struct r8a66597_root_hub	root_hub[R8A66597_MAX_ROOT_HUB];
 	struct list_head		pipe_queue[R8A66597_MAX_NUM_PIPE];
@@ -506,6 +509,7 @@ struct r8a66597 {
 	unsigned long child_connect_map[4];
 
 	unsigned bus_suspended:1;
+	unsigned irq_sense_low:1;
 };
 
 static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
@@ -660,10 +664,36 @@ static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
 {
 	unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
-	if (power)
-		r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
-	else
-		r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+	if (r8a66597->pdata->port_power) {
+		r8a66597->pdata->port_power(port, power);
+	} else {
+		if (power)
+			r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
+		else
+			r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+	}
+}
+
+static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
+{
+	u16 clock = 0;
+
+	switch (pdata->xtal) {
+	case R8A66597_PLATDATA_XTAL_12MHZ:
+		clock = XTAL12;
+		break;
+	case R8A66597_PLATDATA_XTAL_24MHZ:
+		clock = XTAL24;
+		break;
+	case R8A66597_PLATDATA_XTAL_48MHZ:
+		clock = XTAL48;
+		break;
+	default:
+		printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
+		break;
+	}
+
+	return clock;
 }
 
 #define get_pipectr_addr(pipenum)	(PIPE1CTR + (pipenum - 1) * 2)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index cf5e4cf7ea4..274751b4409 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -769,7 +769,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
 	return rc;
 }
 
-static int uhci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
+static int uhci_pci_suspend(struct usb_hcd *hcd)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 	int rc = 0;
@@ -795,10 +795,6 @@ static int uhci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 
 	/* FIXME: Enable non-PME# remote wakeup? */
 
-	/* make sure snapshot being resumed re-enumerates everything */
-	if (message.event == PM_EVENT_PRETHAW)
-		uhci_hc_died(uhci);
-
 done_okay:
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 done:
@@ -806,7 +802,7 @@ done:
 	return rc;
 }
 
-static int uhci_pci_resume(struct usb_hcd *hcd)
+static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 
@@ -820,6 +816,10 @@ static int uhci_pci_resume(struct usb_hcd *hcd)
 
 	spin_lock_irq(&uhci->lock);
 
+	/* Make sure resume from hibernation re-enumerates everything */
+	if (hibernated)
+		uhci_hc_died(uhci);
+
 	/* FIXME: Disable non-PME# remote wakeup? */
 
 	/* The firmware or a boot kernel may have changed the controller
@@ -940,10 +940,11 @@ static struct pci_driver uhci_pci_driver = {
 	.remove =	usb_hcd_pci_remove,
 	.shutdown =	uhci_shutdown,
 
-#ifdef	CONFIG_PM
-	.suspend =	usb_hcd_pci_suspend,
-	.resume =	usb_hcd_pci_resume,
-#endif	/* PM */
+#ifdef CONFIG_PM_SLEEP
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
+#endif
 };
  
 static int __init uhci_hcd_init(void)
@@ -961,7 +962,7 @@ static int __init uhci_hcd_init(void)
 		errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
 		if (!errbuf)
 			goto errbuf_failed;
-		uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
+		uhci_debugfs_root = debugfs_create_dir("uhci", usb_debug_root);
 		if (!uhci_debugfs_root)
 			goto debug_failed;
 	}
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 3e5807d14ff..64e57bfe236 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -260,7 +260,7 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
 	INIT_LIST_HEAD(&qh->node);
 
 	if (udev) {		/* Normal QH */
-		qh->type = hep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+		qh->type = usb_endpoint_type(&hep->desc);
 		if (qh->type != USB_ENDPOINT_XFER_ISOC) {
 			qh->dummy_td = uhci_alloc_td(uhci);
 			if (!qh->dummy_td) {
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
new file mode 100644
index 00000000000..2501c571f85
--- /dev/null
+++ b/drivers/usb/host/xhci-dbg.c
@@ -0,0 +1,485 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "xhci.h"
+
+#define XHCI_INIT_VALUE 0x0
+
+/* Add verbose debugging later, just print everything for now */
+
+void xhci_dbg_regs(struct xhci_hcd *xhci)
+{
+	u32 temp;
+
+	xhci_dbg(xhci, "// xHCI capability registers at %p:\n",
+			xhci->cap_regs);
+	temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+	xhci_dbg(xhci, "// @%p = 0x%x (CAPLENGTH AND HCIVERSION)\n",
+			&xhci->cap_regs->hc_capbase, temp);
+	xhci_dbg(xhci, "//   CAPLENGTH: 0x%x\n",
+			(unsigned int) HC_LENGTH(temp));
+#if 0
+	xhci_dbg(xhci, "//   HCIVERSION: 0x%x\n",
+			(unsigned int) HC_VERSION(temp));
+#endif
+
+	xhci_dbg(xhci, "// xHCI operational registers at %p:\n", xhci->op_regs);
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
+	xhci_dbg(xhci, "// @%p = 0x%x RTSOFF\n",
+			&xhci->cap_regs->run_regs_off,
+			(unsigned int) temp & RTSOFF_MASK);
+	xhci_dbg(xhci, "// xHCI runtime registers at %p:\n", xhci->run_regs);
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->db_off);
+	xhci_dbg(xhci, "// @%p = 0x%x DBOFF\n", &xhci->cap_regs->db_off, temp);
+	xhci_dbg(xhci, "// Doorbell array at %p:\n", xhci->dba);
+}
+
+static void xhci_print_cap_regs(struct xhci_hcd *xhci)
+{
+	u32 temp;
+
+	xhci_dbg(xhci, "xHCI capability registers at %p:\n", xhci->cap_regs);
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+	xhci_dbg(xhci, "CAPLENGTH AND HCIVERSION 0x%x:\n",
+			(unsigned int) temp);
+	xhci_dbg(xhci, "CAPLENGTH: 0x%x\n",
+			(unsigned int) HC_LENGTH(temp));
+	xhci_dbg(xhci, "HCIVERSION: 0x%x\n",
+			(unsigned int) HC_VERSION(temp));
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+	xhci_dbg(xhci, "HCSPARAMS 1: 0x%x\n",
+			(unsigned int) temp);
+	xhci_dbg(xhci, "  Max device slots: %u\n",
+			(unsigned int) HCS_MAX_SLOTS(temp));
+	xhci_dbg(xhci, "  Max interrupters: %u\n",
+			(unsigned int) HCS_MAX_INTRS(temp));
+	xhci_dbg(xhci, "  Max ports: %u\n",
+			(unsigned int) HCS_MAX_PORTS(temp));
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+	xhci_dbg(xhci, "HCSPARAMS 2: 0x%x\n",
+			(unsigned int) temp);
+	xhci_dbg(xhci, "  Isoc scheduling threshold: %u\n",
+			(unsigned int) HCS_IST(temp));
+	xhci_dbg(xhci, "  Maximum allowed segments in event ring: %u\n",
+			(unsigned int) HCS_ERST_MAX(temp));
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+	xhci_dbg(xhci, "HCSPARAMS 3 0x%x:\n",
+			(unsigned int) temp);
+	xhci_dbg(xhci, "  Worst case U1 device exit latency: %u\n",
+			(unsigned int) HCS_U1_LATENCY(temp));
+	xhci_dbg(xhci, "  Worst case U2 device exit latency: %u\n",
+			(unsigned int) HCS_U2_LATENCY(temp));
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+	xhci_dbg(xhci, "HCC PARAMS 0x%x:\n", (unsigned int) temp);
+	xhci_dbg(xhci, "  HC generates %s bit addresses\n",
+			HCC_64BIT_ADDR(temp) ? "64" : "32");
+	/* FIXME */
+	xhci_dbg(xhci, "  FIXME: more HCCPARAMS debugging\n");
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
+	xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK);
+}
+
+static void xhci_print_command_reg(struct xhci_hcd *xhci)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, &xhci->op_regs->command);
+	xhci_dbg(xhci, "USBCMD 0x%x:\n", temp);
+	xhci_dbg(xhci, "  HC is %s\n",
+			(temp & CMD_RUN) ? "running" : "being stopped");
+	xhci_dbg(xhci, "  HC has %sfinished hard reset\n",
+			(temp & CMD_RESET) ? "not " : "");
+	xhci_dbg(xhci, "  Event Interrupts %s\n",
+			(temp & CMD_EIE) ? "enabled " : "disabled");
+	xhci_dbg(xhci, "  Host System Error Interrupts %s\n",
+			(temp & CMD_EIE) ? "enabled " : "disabled");
+	xhci_dbg(xhci, "  HC has %sfinished light reset\n",
+			(temp & CMD_LRESET) ? "not " : "");
+}
+
+static void xhci_print_status(struct xhci_hcd *xhci)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, &xhci->op_regs->status);
+	xhci_dbg(xhci, "USBSTS 0x%x:\n", temp);
+	xhci_dbg(xhci, "  Event ring is %sempty\n",
+			(temp & STS_EINT) ? "not " : "");
+	xhci_dbg(xhci, "  %sHost System Error\n",
+			(temp & STS_FATAL) ? "WARNING: " : "No ");
+	xhci_dbg(xhci, "  HC is %s\n",
+			(temp & STS_HALT) ? "halted" : "running");
+}
+
+static void xhci_print_op_regs(struct xhci_hcd *xhci)
+{
+	xhci_dbg(xhci, "xHCI operational registers at %p:\n", xhci->op_regs);
+	xhci_print_command_reg(xhci);
+	xhci_print_status(xhci);
+}
+
+static void xhci_print_ports(struct xhci_hcd *xhci)
+{
+	u32 __iomem *addr;
+	int i, j;
+	int ports;
+	char *names[NUM_PORT_REGS] = {
+		"status",
+		"power",
+		"link",
+		"reserved",
+	};
+
+	ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	addr = &xhci->op_regs->port_status_base;
+	for (i = 0; i < ports; i++) {
+		for (j = 0; j < NUM_PORT_REGS; ++j) {
+			xhci_dbg(xhci, "%p port %s reg = 0x%x\n",
+					addr, names[j],
+					(unsigned int) xhci_readl(xhci, addr));
+			addr++;
+		}
+	}
+}
+
+void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num)
+{
+	void *addr;
+	u32 temp;
+
+	addr = &ir_set->irq_pending;
+	temp = xhci_readl(xhci, addr);
+	if (temp == XHCI_INIT_VALUE)
+		return;
+
+	xhci_dbg(xhci, "  %p: ir_set[%i]\n", ir_set, set_num);
+
+	xhci_dbg(xhci, "  %p: ir_set.pending = 0x%x\n", addr,
+			(unsigned int)temp);
+
+	addr = &ir_set->irq_control;
+	temp = xhci_readl(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.control = 0x%x\n", addr,
+			(unsigned int)temp);
+
+	addr = &ir_set->erst_size;
+	temp = xhci_readl(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_size = 0x%x\n", addr,
+			(unsigned int)temp);
+
+	addr = &ir_set->rsvd;
+	temp = xhci_readl(xhci, addr);
+	if (temp != XHCI_INIT_VALUE)
+		xhci_dbg(xhci, "  WARN: %p: ir_set.rsvd = 0x%x\n",
+				addr, (unsigned int)temp);
+
+	addr = &ir_set->erst_base[0];
+	temp = xhci_readl(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_base[0] = 0x%x\n",
+			addr, (unsigned int) temp);
+
+	addr = &ir_set->erst_base[1];
+	temp = xhci_readl(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_base[1] = 0x%x\n",
+			addr, (unsigned int) temp);
+
+	addr = &ir_set->erst_dequeue[0];
+	temp = xhci_readl(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_dequeue[0] = 0x%x\n",
+			addr, (unsigned int) temp);
+
+	addr = &ir_set->erst_dequeue[1];
+	temp = xhci_readl(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_dequeue[1] = 0x%x\n",
+			addr, (unsigned int) temp);
+}
+
+void xhci_print_run_regs(struct xhci_hcd *xhci)
+{
+	u32 temp;
+	int i;
+
+	xhci_dbg(xhci, "xHCI runtime registers at %p:\n", xhci->run_regs);
+	temp = xhci_readl(xhci, &xhci->run_regs->microframe_index);
+	xhci_dbg(xhci, "  %p: Microframe index = 0x%x\n",
+			&xhci->run_regs->microframe_index,
+			(unsigned int) temp);
+	for (i = 0; i < 7; ++i) {
+		temp = xhci_readl(xhci, &xhci->run_regs->rsvd[i]);
+		if (temp != XHCI_INIT_VALUE)
+			xhci_dbg(xhci, "  WARN: %p: Rsvd[%i] = 0x%x\n",
+					&xhci->run_regs->rsvd[i],
+					i, (unsigned int) temp);
+	}
+}
+
+void xhci_print_registers(struct xhci_hcd *xhci)
+{
+	xhci_print_cap_regs(xhci);
+	xhci_print_op_regs(xhci);
+	xhci_print_ports(xhci);
+}
+
+void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb)
+{
+	int i;
+	for (i = 0; i < 4; ++i)
+		xhci_dbg(xhci, "Offset 0x%x = 0x%x\n",
+				i*4, trb->generic.field[i]);
+}
+
+/**
+ * Debug a transfer request block (TRB).
+ */
+void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
+{
+	u64	address;
+	u32	type = xhci_readl(xhci, &trb->link.control) & TRB_TYPE_BITMASK;
+
+	switch (type) {
+	case TRB_TYPE(TRB_LINK):
+		xhci_dbg(xhci, "Link TRB:\n");
+		xhci_print_trb_offsets(xhci, trb);
+
+		address = trb->link.segment_ptr[0] +
+			(((u64) trb->link.segment_ptr[1]) << 32);
+		xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
+
+		xhci_dbg(xhci, "Interrupter target = 0x%x\n",
+				GET_INTR_TARGET(trb->link.intr_target));
+		xhci_dbg(xhci, "Cycle bit = %u\n",
+				(unsigned int) (trb->link.control & TRB_CYCLE));
+		xhci_dbg(xhci, "Toggle cycle bit = %u\n",
+				(unsigned int) (trb->link.control & LINK_TOGGLE));
+		xhci_dbg(xhci, "No Snoop bit = %u\n",
+				(unsigned int) (trb->link.control & TRB_NO_SNOOP));
+		break;
+	case TRB_TYPE(TRB_TRANSFER):
+		address = trb->trans_event.buffer[0] +
+			(((u64) trb->trans_event.buffer[1]) << 32);
+		/*
+		 * FIXME: look at flags to figure out if it's an address or if
+		 * the data is directly in the buffer field.
+		 */
+		xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
+		break;
+	case TRB_TYPE(TRB_COMPLETION):
+		address = trb->event_cmd.cmd_trb[0] +
+			(((u64) trb->event_cmd.cmd_trb[1]) << 32);
+		xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
+		xhci_dbg(xhci, "Completion status = %u\n",
+				(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
+		xhci_dbg(xhci, "Flags = 0x%x\n", (unsigned int) trb->event_cmd.flags);
+		break;
+	default:
+		xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n",
+				(unsigned int) type>>10);
+		xhci_print_trb_offsets(xhci, trb);
+		break;
+	}
+}
+
+/**
+ * Debug a segment with an xHCI ring.
+ *
+ * @return The Link TRB of the segment, or NULL if there is no Link TRB
+ * (which is a bug, since all segments must have a Link TRB).
+ *
+ * Prints out all TRBs in the segment, even those after the Link TRB.
+ *
+ * XXX: should we print out TRBs that the HC owns?  As long as we don't
+ * write, that should be fine...  We shouldn't expect that the memory pointed to
+ * by the TRB is valid at all.  Do we care about ones the HC owns?  Probably,
+ * for HC debugging.
+ */
+void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
+{
+	int i;
+	u32 addr = (u32) seg->dma;
+	union xhci_trb *trb = seg->trbs;
+
+	for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
+		trb = &seg->trbs[i];
+		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
+				(unsigned int) trb->link.segment_ptr[0],
+				(unsigned int) trb->link.segment_ptr[1],
+				(unsigned int) trb->link.intr_target,
+				(unsigned int) trb->link.control);
+		addr += sizeof(*trb);
+	}
+}
+
+void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+	xhci_dbg(xhci, "Ring deq = %p (virt), 0x%llx (dma)\n",
+			ring->dequeue,
+			(unsigned long long)xhci_trb_virt_to_dma(ring->deq_seg,
+							    ring->dequeue));
+	xhci_dbg(xhci, "Ring deq updated %u times\n",
+			ring->deq_updates);
+	xhci_dbg(xhci, "Ring enq = %p (virt), 0x%llx (dma)\n",
+			ring->enqueue,
+			(unsigned long long)xhci_trb_virt_to_dma(ring->enq_seg,
+							    ring->enqueue));
+	xhci_dbg(xhci, "Ring enq updated %u times\n",
+			ring->enq_updates);
+}
+
+/**
+ * Debugging for an xHCI ring, which is a queue broken into multiple segments.
+ *
+ * Print out each segment in the ring.  Check that the DMA address in
+ * each link segment actually matches the segment's stored DMA address.
+ * Check that the link end bit is only set at the end of the ring.
+ * Check that the dequeue and enqueue pointers point to real data in this ring
+ * (not some other ring).
+ */
+void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+	/* FIXME: Throw an error if any segment doesn't have a Link TRB */
+	struct xhci_segment *seg;
+	struct xhci_segment *first_seg = ring->first_seg;
+	xhci_debug_segment(xhci, first_seg);
+
+	if (!ring->enq_updates && !ring->deq_updates) {
+		xhci_dbg(xhci, "  Ring has not been updated\n");
+		return;
+	}
+	for (seg = first_seg->next; seg != first_seg; seg = seg->next)
+		xhci_debug_segment(xhci, seg);
+}
+
+void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
+{
+	u32 addr = (u32) erst->erst_dma_addr;
+	int i;
+	struct xhci_erst_entry *entry;
+
+	for (i = 0; i < erst->num_entries; ++i) {
+		entry = &erst->entries[i];
+		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
+				(unsigned int) addr,
+				(unsigned int) entry->seg_addr[0],
+				(unsigned int) entry->seg_addr[1],
+				(unsigned int) entry->seg_size,
+				(unsigned int) entry->rsvd);
+		addr += sizeof(*entry);
+	}
+}
+
+void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
+{
+	u32 val;
+
+	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
+	xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
+	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
+	xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+{
+	int i, j;
+	int last_ep_ctx = 31;
+	/* Fields are 32 bits wide, DMA addresses are in bytes */
+	int field_size = 32 / 8;
+
+	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+			&ctx->drop_flags, (unsigned long long)dma,
+			ctx->drop_flags);
+	dma += field_size;
+	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+			&ctx->add_flags, (unsigned long long)dma,
+			ctx->add_flags);
+	dma += field_size;
+	for (i = 0; i > 6; ++i) {
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+				&ctx->rsvd[i], (unsigned long long)dma,
+				ctx->rsvd[i], i);
+		dma += field_size;
+	}
+
+	xhci_dbg(xhci, "Slot Context:\n");
+	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
+			&ctx->slot.dev_info,
+			(unsigned long long)dma, ctx->slot.dev_info);
+	dma += field_size;
+	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
+			&ctx->slot.dev_info2,
+			(unsigned long long)dma, ctx->slot.dev_info2);
+	dma += field_size;
+	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
+			&ctx->slot.tt_info,
+			(unsigned long long)dma, ctx->slot.tt_info);
+	dma += field_size;
+	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
+			&ctx->slot.dev_state,
+			(unsigned long long)dma, ctx->slot.dev_state);
+	dma += field_size;
+	for (i = 0; i > 4; ++i) {
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+				&ctx->slot.reserved[i], (unsigned long long)dma,
+				ctx->slot.reserved[i], i);
+		dma += field_size;
+	}
+
+	if (last_ep < 31)
+		last_ep_ctx = last_ep + 1;
+	for (i = 0; i < last_ep_ctx; ++i) {
+		xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
+				&ctx->ep[i].ep_info,
+				(unsigned long long)dma, ctx->ep[i].ep_info);
+		dma += field_size;
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
+				&ctx->ep[i].ep_info2,
+				(unsigned long long)dma, ctx->ep[i].ep_info2);
+		dma += field_size;
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
+				&ctx->ep[i].deq[0],
+				(unsigned long long)dma, ctx->ep[i].deq[0]);
+		dma += field_size;
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
+				&ctx->ep[i].deq[1],
+				(unsigned long long)dma, ctx->ep[i].deq[1]);
+		dma += field_size;
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
+				&ctx->ep[i].tx_info,
+				(unsigned long long)dma, ctx->ep[i].tx_info);
+		dma += field_size;
+		for (j = 0; j < 3; ++j) {
+			xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+					&ctx->ep[i].reserved[j],
+					(unsigned long long)dma,
+					ctx->ep[i].reserved[j], j);
+			dma += field_size;
+		}
+	}
+}
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
new file mode 100644
index 00000000000..ecc131c3fe3
--- /dev/null
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -0,0 +1,145 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+/* Up to 16 microframes to halt an HC - one microframe is 125 microsectonds */
+#define XHCI_MAX_HALT_USEC	(16*125)
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define XHCI_STS_HALT		(1<<0)
+
+/* HCCPARAMS offset from PCI base address */
+#define XHCI_HCC_PARAMS_OFFSET	0x10
+/* HCCPARAMS contains the first extended capability pointer */
+#define XHCI_HCC_EXT_CAPS(p)	(((p)>>16)&0xffff)
+
+/* Command and Status registers offset from the Operational Registers address */
+#define XHCI_CMD_OFFSET		0x00
+#define XHCI_STS_OFFSET		0x04
+
+#define XHCI_MAX_EXT_CAPS		50
+
+/* Capability Register */
+/* bits 7:0 - how long is the Capabilities register */
+#define XHCI_HC_LENGTH(p)	(((p)>>00)&0x00ff)
+
+/* Extended capability register fields */
+#define XHCI_EXT_CAPS_ID(p)	(((p)>>0)&0xff)
+#define XHCI_EXT_CAPS_NEXT(p)	(((p)>>8)&0xff)
+#define	XHCI_EXT_CAPS_VAL(p)	((p)>>16)
+/* Extended capability IDs - ID 0 reserved */
+#define XHCI_EXT_CAPS_LEGACY	1
+#define XHCI_EXT_CAPS_PROTOCOL	2
+#define XHCI_EXT_CAPS_PM	3
+#define XHCI_EXT_CAPS_VIRT	4
+#define XHCI_EXT_CAPS_ROUTE	5
+/* IDs 6-9 reserved */
+#define XHCI_EXT_CAPS_DEBUG	10
+/* USB Legacy Support Capability - section 7.1.1 */
+#define XHCI_HC_BIOS_OWNED	(1 << 16)
+#define XHCI_HC_OS_OWNED	(1 << 24)
+
+/* USB Legacy Support Capability - section 7.1.1 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_SUPPORT_OFFSET	(0x00)
+
+/* USB Legacy Support Control and Status Register  - section 7.1.2 */
+/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
+#define XHCI_LEGACY_CONTROL_OFFSET	(0x04)
+/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define	XHCI_LEGACY_DISABLE_SMI		((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+
+/* command register values to disable interrupts and halt the HC */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define XHCI_CMD_RUN		(1 << 0)
+/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
+#define XHCI_CMD_EIE		(1 << 2)
+/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
+#define XHCI_CMD_HSEIE		(1 << 3)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define XHCI_CMD_EWE		(1 << 10)
+
+#define XHCI_IRQS		(XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE)
+
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define XHCI_STS_CNR		(1 << 11)
+
+#include <linux/io.h>
+
+/**
+ * Return the next extended capability pointer register.
+ *
+ * @base	PCI register base address.
+ *
+ * @ext_offset	Offset of the 32-bit register that contains the extended
+ * capabilites pointer.  If searching for the first extended capability, pass
+ * in XHCI_HCC_PARAMS_OFFSET.  If searching for the next extended capability,
+ * pass in the offset of the current extended capability register.
+ *
+ * Returns 0 if there is no next extended capability register or returns the register offset
+ * from the PCI registers base address.
+ */
+static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset)
+{
+	u32 next;
+
+	next = readl(base + ext_offset);
+
+	if (ext_offset == XHCI_HCC_PARAMS_OFFSET)
+		/* Find the first extended capability */
+		next = XHCI_HCC_EXT_CAPS(next);
+	else
+		/* Find the next extended capability */
+		next = XHCI_EXT_CAPS_NEXT(next);
+	if (!next)
+		return 0;
+	/*
+	 * Address calculation from offset of extended capabilities
+	 * (or HCCPARAMS) register - see section 5.3.6 and section 7.
+	 */
+	return ext_offset + (next << 2);
+}
+
+/**
+ * Find the offset of the extended capabilities with capability ID id.
+ *
+ * @base PCI MMIO registers base address.
+ * @ext_offset Offset from base of the first extended capability to look at,
+ * 		or the address of HCCPARAMS.
+ * @id Extended capability ID to search for.
+ *
+ * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities
+ * to make sure that the list doesn't contain a loop.
+ */
+static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id)
+{
+	u32 val;
+	int limit = XHCI_MAX_EXT_CAPS;
+
+	while (ext_offset && limit > 0) {
+		val = readl(base + ext_offset);
+		if (XHCI_EXT_CAPS_ID(val) == id)
+			break;
+		ext_offset = xhci_find_next_cap_offset(base, ext_offset);
+		limit--;
+	}
+	if (limit > 0)
+		return ext_offset;
+	return 0;
+}
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
new file mode 100644
index 00000000000..dba3e07ccd0
--- /dev/null
+++ b/drivers/usb/host/xhci-hcd.c
@@ -0,0 +1,1274 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include "xhci.h"
+
+#define DRIVER_AUTHOR "Sarah Sharp"
+#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+/* TODO: copied from ehci-hcd.c - can this be refactored? */
+/*
+ * handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done).  There are two failure modes:  "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ */
+static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+		      u32 mask, u32 done, int usec)
+{
+	u32	result;
+
+	do {
+		result = xhci_readl(xhci, ptr);
+		if (result == ~(u32)0)		/* card removed */
+			return -ENODEV;
+		result &= mask;
+		if (result == done)
+			return 0;
+		udelay(1);
+		usec--;
+	} while (usec > 0);
+	return -ETIMEDOUT;
+}
+
+/*
+ * Force HC into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * HC will complete any current and actively pipelined transactions, and
+ * should halt within 16 microframes of the run/stop bit being cleared.
+ * Read HC Halted bit in the status register to see when the HC is finished.
+ * XXX: shouldn't we set HC_STATE_HALT here somewhere?
+ */
+int xhci_halt(struct xhci_hcd *xhci)
+{
+	u32 halted;
+	u32 cmd;
+	u32 mask;
+
+	xhci_dbg(xhci, "// Halt the HC\n");
+	/* Disable all interrupts from the host controller */
+	mask = ~(XHCI_IRQS);
+	halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
+	if (!halted)
+		mask &= ~CMD_RUN;
+
+	cmd = xhci_readl(xhci, &xhci->op_regs->command);
+	cmd &= mask;
+	xhci_writel(xhci, cmd, &xhci->op_regs->command);
+
+	return handshake(xhci, &xhci->op_regs->status,
+			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+}
+
+/*
+ * Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int xhci_reset(struct xhci_hcd *xhci)
+{
+	u32 command;
+	u32 state;
+
+	state = xhci_readl(xhci, &xhci->op_regs->status);
+	BUG_ON((state & STS_HALT) == 0);
+
+	xhci_dbg(xhci, "// Reset the HC\n");
+	command = xhci_readl(xhci, &xhci->op_regs->command);
+	command |= CMD_RESET;
+	xhci_writel(xhci, command, &xhci->op_regs->command);
+	/* XXX: Why does EHCI set this here?  Shouldn't other code do this? */
+	xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+
+	return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000);
+}
+
+/*
+ * Stop the HC from processing the endpoint queues.
+ */
+static void xhci_quiesce(struct xhci_hcd *xhci)
+{
+	/*
+	 * Queues are per endpoint, so we need to disable an endpoint or slot.
+	 *
+	 * To disable a slot, we need to insert a disable slot command on the
+	 * command ring and ring the doorbell.  This will also free any internal
+	 * resources associated with the slot (which might not be what we want).
+	 *
+	 * A Release Endpoint command sounds better - doesn't free internal HC
+	 * memory, but removes the endpoints from the schedule and releases the
+	 * bandwidth, disables the doorbells, and clears the endpoint enable
+	 * flag.  Usually used prior to a set interface command.
+	 *
+	 * TODO: Implement after command ring code is done.
+	 */
+	BUG_ON(!HC_IS_RUNNING(xhci_to_hcd(xhci)->state));
+	xhci_dbg(xhci, "Finished quiescing -- code not written yet\n");
+}
+
+#if 0
+/* Set up MSI-X table for entry 0 (may claim other entries later) */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+	int ret;
+	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	xhci->msix_count = 0;
+	/* XXX: did I do this right?  ixgbe does kcalloc for more than one */
+	xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL);
+	if (!xhci->msix_entries) {
+		xhci_err(xhci, "Failed to allocate MSI-X entries\n");
+		return -ENOMEM;
+	}
+	xhci->msix_entries[0].entry = 0;
+
+	ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
+	if (ret) {
+		xhci_err(xhci, "Failed to enable MSI-X\n");
+		goto free_entries;
+	}
+
+	/*
+	 * Pass the xhci pointer value as the request_irq "cookie".
+	 * If more irqs are added, this will need to be unique for each one.
+	 */
+	ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0,
+			"xHCI", xhci_to_hcd(xhci));
+	if (ret) {
+		xhci_err(xhci, "Failed to allocate MSI-X interrupt\n");
+		goto disable_msix;
+	}
+	xhci_dbg(xhci, "Finished setting up MSI-X\n");
+	return 0;
+
+disable_msix:
+	pci_disable_msix(pdev);
+free_entries:
+	kfree(xhci->msix_entries);
+	xhci->msix_entries = NULL;
+	return ret;
+}
+
+/* XXX: code duplication; can xhci_setup_msix call this? */
+/* Free any IRQs and disable MSI-X */
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	if (!xhci->msix_entries)
+		return;
+
+	free_irq(xhci->msix_entries[0].vector, xhci);
+	pci_disable_msix(pdev);
+	kfree(xhci->msix_entries);
+	xhci->msix_entries = NULL;
+	xhci_dbg(xhci, "Finished cleaning up MSI-X\n");
+}
+#endif
+
+/*
+ * Initialize memory for HCD and xHC (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts (?), set up a command ring segment (or two?), create event
+ * ring (one for now).
+ */
+int xhci_init(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	int retval = 0;
+
+	xhci_dbg(xhci, "xhci_init\n");
+	spin_lock_init(&xhci->lock);
+	retval = xhci_mem_init(xhci, GFP_KERNEL);
+	xhci_dbg(xhci, "Finished xhci_init\n");
+
+	return retval;
+}
+
+/*
+ * Called in interrupt context when there might be work
+ * queued on the event ring
+ *
+ * xhci->lock must be held by caller.
+ */
+static void xhci_work(struct xhci_hcd *xhci)
+{
+	u32 temp;
+
+	/*
+	 * Clear the op reg interrupt status first,
+	 * so we can receive interrupts from other MSI-X interrupters.
+	 * Write 1 to clear the interrupt status.
+	 */
+	temp = xhci_readl(xhci, &xhci->op_regs->status);
+	temp |= STS_EINT;
+	xhci_writel(xhci, temp, &xhci->op_regs->status);
+	/* FIXME when MSI-X is supported and there are multiple vectors */
+	/* Clear the MSI-X event interrupt status */
+
+	/* Acknowledge the interrupt */
+	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	temp |= 0x3;
+	xhci_writel(xhci, temp, &xhci->ir_set->irq_pending);
+	/* Flush posted writes */
+	xhci_readl(xhci, &xhci->ir_set->irq_pending);
+
+	/* FIXME this should be a delayed service routine that clears the EHB */
+	xhci_handle_event(xhci);
+
+	/* Clear the event handler busy flag; the event ring should be empty. */
+	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+	xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+	/* Flush posted writes -- FIXME is this necessary? */
+	xhci_readl(xhci, &xhci->ir_set->irq_pending);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * xHCI spec says we can get an interrupt, and if the HC has an error condition,
+ * we might get bad data out of the event ring.  Section 4.10.2.7 has a list of
+ * indicators of an event TRB error, but we check the status *first* to be safe.
+ */
+irqreturn_t xhci_irq(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 temp, temp2;
+
+	spin_lock(&xhci->lock);
+	/* Check if the xHC generated the interrupt, or the irq is shared */
+	temp = xhci_readl(xhci, &xhci->op_regs->status);
+	temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
+		spin_unlock(&xhci->lock);
+		return IRQ_NONE;
+	}
+
+	if (temp & STS_FATAL) {
+		xhci_warn(xhci, "WARNING: Host System Error\n");
+		xhci_halt(xhci);
+		xhci_to_hcd(xhci)->state = HC_STATE_HALT;
+		spin_unlock(&xhci->lock);
+		return -ESHUTDOWN;
+	}
+
+	xhci_work(xhci);
+	spin_unlock(&xhci->lock);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+void xhci_event_ring_work(unsigned long arg)
+{
+	unsigned long flags;
+	int temp;
+	struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
+	int i, j;
+
+	xhci_dbg(xhci, "Poll event ring: %lu\n", jiffies);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	temp = xhci_readl(xhci, &xhci->op_regs->status);
+	xhci_dbg(xhci, "op reg status = 0x%x\n", temp);
+	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
+	xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled);
+	xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask);
+	xhci->error_bitmask = 0;
+	xhci_dbg(xhci, "Event ring:\n");
+	xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
+	xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+	temp &= ERST_PTR_MASK;
+	xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+	xhci_dbg(xhci, "Command ring:\n");
+	xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
+	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+	xhci_dbg_cmd_ptrs(xhci);
+	for (i = 0; i < MAX_HC_SLOTS; ++i) {
+		if (xhci->devs[i]) {
+			for (j = 0; j < 31; ++j) {
+				if (xhci->devs[i]->ep_rings[j]) {
+					xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j);
+					xhci_debug_segment(xhci, xhci->devs[i]->ep_rings[j]->deq_seg);
+				}
+			}
+		}
+	}
+
+	if (xhci->noops_submitted != NUM_TEST_NOOPS)
+		if (xhci_setup_one_noop(xhci))
+			xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	if (!xhci->zombie)
+		mod_timer(&xhci->event_ring_timer, jiffies + POLL_TIMEOUT * HZ);
+	else
+		xhci_dbg(xhci, "Quit polling the event ring.\n");
+}
+#endif
+
+/*
+ * Start the HC after it was halted.
+ *
+ * This function is called by the USB core when the HC driver is added.
+ * Its opposite is xhci_stop().
+ *
+ * xhci_init() must be called once before this function can be called.
+ * Reset the HC, enable device slot contexts, program DCBAAP, and
+ * set command ring pointer and event ring pointer.
+ *
+ * Setup MSI-X vectors and enable interrupts.
+ */
+int xhci_run(struct usb_hcd *hcd)
+{
+	u32 temp;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	void (*doorbell)(struct xhci_hcd *) = NULL;
+
+	hcd->uses_new_polling = 1;
+	hcd->poll_rh = 0;
+
+	xhci_dbg(xhci, "xhci_run\n");
+#if 0	/* FIXME: MSI not setup yet */
+	/* Do this at the very last minute */
+	ret = xhci_setup_msix(xhci);
+	if (!ret)
+		return ret;
+
+	return -ENOSYS;
+#endif
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+	init_timer(&xhci->event_ring_timer);
+	xhci->event_ring_timer.data = (unsigned long) xhci;
+	xhci->event_ring_timer.function = xhci_event_ring_work;
+	/* Poll the event ring */
+	xhci->event_ring_timer.expires = jiffies + POLL_TIMEOUT * HZ;
+	xhci->zombie = 0;
+	xhci_dbg(xhci, "Setting event ring polling timer\n");
+	add_timer(&xhci->event_ring_timer);
+#endif
+
+	xhci_dbg(xhci, "// Set the interrupt modulation register\n");
+	temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
+	temp &= ~ER_IRQ_INTERVAL_MASK;
+	temp |= (u32) 160;
+	xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
+
+	/* Set the HCD state before we enable the irqs */
+	hcd->state = HC_STATE_RUNNING;
+	temp = xhci_readl(xhci, &xhci->op_regs->command);
+	temp |= (CMD_EIE);
+	xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n",
+			temp);
+	xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	xhci_dbg(xhci, "// Enabling event ring interrupter %p by writing 0x%x to irq_pending\n",
+			xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
+	xhci_writel(xhci, ER_IRQ_ENABLE(temp),
+			&xhci->ir_set->irq_pending);
+	xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+	if (NUM_TEST_NOOPS > 0)
+		doorbell = xhci_setup_one_noop(xhci);
+
+	xhci_dbg(xhci, "Command ring memory map follows:\n");
+	xhci_debug_ring(xhci, xhci->cmd_ring);
+	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+	xhci_dbg_cmd_ptrs(xhci);
+
+	xhci_dbg(xhci, "ERST memory map follows:\n");
+	xhci_dbg_erst(xhci, &xhci->erst);
+	xhci_dbg(xhci, "Event ring:\n");
+	xhci_debug_ring(xhci, xhci->event_ring);
+	xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+	temp &= ERST_PTR_MASK;
+	xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
+	xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
+
+	temp = xhci_readl(xhci, &xhci->op_regs->command);
+	temp |= (CMD_RUN);
+	xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+			temp);
+	xhci_writel(xhci, temp, &xhci->op_regs->command);
+	/* Flush PCI posted writes */
+	temp = xhci_readl(xhci, &xhci->op_regs->command);
+	xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
+	if (doorbell)
+		(*doorbell)(xhci);
+
+	xhci_dbg(xhci, "Finished xhci_run\n");
+	return 0;
+}
+
+/*
+ * Stop xHCI driver.
+ *
+ * This function is called by the USB core when the HC driver is removed.
+ * Its opposite is xhci_run().
+ *
+ * Disable device contexts, disable IRQs, and quiesce the HC.
+ * Reset the HC, finish any completed transactions, and cleanup memory.
+ */
+void xhci_stop(struct usb_hcd *hcd)
+{
+	u32 temp;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	spin_lock_irq(&xhci->lock);
+	if (HC_IS_RUNNING(hcd->state))
+		xhci_quiesce(xhci);
+	xhci_halt(xhci);
+	xhci_reset(xhci);
+	spin_unlock_irq(&xhci->lock);
+
+#if 0	/* No MSI yet */
+	xhci_cleanup_msix(xhci);
+#endif
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+	/* Tell the event ring poll function not to reschedule */
+	xhci->zombie = 1;
+	del_timer_sync(&xhci->event_ring_timer);
+#endif
+
+	xhci_dbg(xhci, "// Disabling event ring interrupts\n");
+	temp = xhci_readl(xhci, &xhci->op_regs->status);
+	xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
+	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	xhci_writel(xhci, ER_IRQ_DISABLE(temp),
+			&xhci->ir_set->irq_pending);
+	xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+	xhci_dbg(xhci, "cleaning up memory\n");
+	xhci_mem_cleanup(xhci);
+	xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
+		    xhci_readl(xhci, &xhci->op_regs->status));
+}
+
+/*
+ * Shutdown HC (not bus-specific)
+ *
+ * This is called when the machine is rebooting or halting.  We assume that the
+ * machine will be powered off, and the HC's internal state will be reset.
+ * Don't bother to free memory.
+ */
+void xhci_shutdown(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	spin_lock_irq(&xhci->lock);
+	xhci_halt(xhci);
+	spin_unlock_irq(&xhci->lock);
+
+#if 0
+	xhci_cleanup_msix(xhci);
+#endif
+
+	xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
+		    xhci_readl(xhci, &xhci->op_regs->status));
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and
+ * HCDs.  Find the index for an endpoint given its descriptor.  Use the return
+ * value to right shift 1 for the bitmask.
+ *
+ * Index  = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
+{
+	unsigned int index;
+	if (usb_endpoint_xfer_control(desc))
+		index = (unsigned int) (usb_endpoint_num(desc)*2);
+	else
+		index = (unsigned int) (usb_endpoint_num(desc)*2) +
+			(usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+	return index;
+}
+
+/* Find the flag for this endpoint (for use in the control context).  Use the
+ * endpoint index to create a bitmask.  The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
+{
+	return 1 << (xhci_get_endpoint_index(desc) + 1);
+}
+
+/* Compute the last valid endpoint context index.  Basically, this is the
+ * endpoint index plus one.  For slot contexts with more than valid endpoint,
+ * we find the most significant bit set in the added contexts flags.
+ * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
+ * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
+ */
+static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+{
+	return fls(added_ctxs) - 1;
+}
+
+/* Returns 1 if the arguments are OK;
+ * returns 0 this is a root hub; returns -EINVAL for NULL pointers.
+ */
+int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint *ep, int check_ep, const char *func) {
+	if (!hcd || (check_ep && !ep) || !udev) {
+		printk(KERN_DEBUG "xHCI %s called with invalid args\n",
+				func);
+		return -EINVAL;
+	}
+	if (!udev->parent) {
+		printk(KERN_DEBUG "xHCI %s called for root hub\n",
+				func);
+		return 0;
+	}
+	if (!udev->slot_id) {
+		printk(KERN_DEBUG "xHCI %s called with unaddressed device\n",
+				func);
+		return -EINVAL;
+	}
+	return 1;
+}
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ */
+int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned long flags;
+	int ret = 0;
+	unsigned int slot_id, ep_index;
+
+	if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
+		return -EINVAL;
+
+	slot_id = urb->dev->slot_id;
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (!xhci->devs || !xhci->devs[slot_id]) {
+		if (!in_interrupt())
+			dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		if (!in_interrupt())
+			xhci_dbg(xhci, "urb submitted during PCI suspend\n");
+		ret = -ESHUTDOWN;
+		goto exit;
+	}
+	if (usb_endpoint_xfer_control(&urb->ep->desc))
+		ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+				slot_id, ep_index);
+	else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
+		ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+				slot_id, ep_index);
+	else
+		ret = -EINVAL;
+exit:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return ret;
+}
+
+/*
+ * Remove the URB's TD from the endpoint ring.  This may cause the HC to stop
+ * USB transfers, potentially stopping in the middle of a TRB buffer.  The HC
+ * should pick up where it left off in the TD, unless a Set Transfer Ring
+ * Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled URB will be "removed" from
+ * the ring.  Since the ring is a contiguous structure, they can't be physically
+ * removed.  Instead, there are two options:
+ *
+ *  1) If the HC is in the middle of processing the URB to be canceled, we
+ *     simply move the ring's dequeue pointer past those TRBs using the Set
+ *     Transfer Ring Dequeue Pointer command.  This will be the common case,
+ *     when drivers timeout on the last submitted URB and attempt to cancel.
+ *
+ *  2) If the HC is in the middle of a different TD, we turn the TRBs into a
+ *     series of 1-TRB transfer no-op TDs.  (No-ops shouldn't be chained.)  The
+ *     HC will need to invalidate the any TRBs it has cached after the stop
+ *     endpoint command, as noted in the xHCI 0.95 errata.
+ *
+ *  3) The TD may have completed by the time the Stop Endpoint Command
+ *     completes, so software needs to handle that case too.
+ *
+ * This function should protect against the TD enqueueing code ringing the
+ * doorbell while this code is waiting for a Stop Endpoint command to complete.
+ * It also needs to account for multiple cancellations on happening at the same
+ * time for the same endpoint.
+ *
+ * Note that this function can be called in any context, or so says
+ * usb_hcd_unlink_urb()
+ */
+int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	unsigned long flags;
+	int ret;
+	struct xhci_hcd *xhci;
+	struct xhci_td *td;
+	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
+
+	xhci = hcd_to_xhci(hcd);
+	spin_lock_irqsave(&xhci->lock, flags);
+	/* Make sure the URB hasn't completed or been unlinked already */
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret || !urb->hcpriv)
+		goto done;
+
+	xhci_dbg(xhci, "Cancel URB %p\n", urb);
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+	ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+	td = (struct xhci_td *) urb->hcpriv;
+
+	ep_ring->cancels_pending++;
+	list_add_tail(&td->cancelled_td_list, &ep_ring->cancelled_td_list);
+	/* Queue a stop endpoint command, but only if this is
+	 * the first cancellation to be handled.
+	 */
+	if (ep_ring->cancels_pending == 1) {
+		xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index);
+		xhci_ring_cmd_db(xhci);
+	}
+done:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return ret;
+}
+
+/* Drop an endpoint from a new bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint that is being
+ * disabled, so there's no need for mutual exclusion to protect
+ * the xhci->devs[slot_id] structure.
+ */
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_device_control *in_ctx;
+	unsigned int last_ctx;
+	unsigned int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 drop_flag;
+	u32 new_add_flags, new_drop_flags, new_slot_info;
+	int ret;
+
+	ret = xhci_check_args(hcd, udev, ep, 1, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+
+	drop_flag = xhci_get_endpoint_flag(&ep->desc);
+	if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
+		xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
+				__func__, drop_flag);
+		return 0;
+	}
+
+	if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+		xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+	/* If the HC already knows the endpoint is disabled,
+	 * or the HCD has noted it is disabled, ignore this request
+	 */
+	if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
+			in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+		xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
+				__func__, ep);
+		return 0;
+	}
+
+	in_ctx->drop_flags |= drop_flag;
+	new_drop_flags = in_ctx->drop_flags;
+
+	in_ctx->add_flags = ~drop_flag;
+	new_add_flags = in_ctx->add_flags;
+
+	last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+	/* Update the last valid endpoint context, if we deleted the last one */
+	if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+		in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+		in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+	}
+	new_slot_info = in_ctx->slot.dev_info;
+
+	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
+	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+			(unsigned int) ep->desc.bEndpointAddress,
+			udev->slot_id,
+			(unsigned int) new_drop_flags,
+			(unsigned int) new_add_flags,
+			(unsigned int) new_slot_info);
+	return 0;
+}
+
+/* Add an endpoint to a new possible bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint until the
+ * configuration or alt setting is installed in the device, so there's no need
+ * for mutual exclusion to protect the xhci->devs[slot_id] structure.
+ */
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_device_control *in_ctx;
+	unsigned int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 added_ctxs;
+	unsigned int last_ctx;
+	u32 new_add_flags, new_drop_flags, new_slot_info;
+	int ret = 0;
+
+	ret = xhci_check_args(hcd, udev, ep, 1, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+
+	added_ctxs = xhci_get_endpoint_flag(&ep->desc);
+	last_ctx = xhci_last_valid_endpoint(added_ctxs);
+	if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+		/* FIXME when we have to issue an evaluate endpoint command to
+		 * deal with ep0 max packet size changing once we get the
+		 * descriptors
+		 */
+		xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
+				__func__, added_ctxs);
+		return 0;
+	}
+
+	if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+		xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+	/* If the HCD has already noted the endpoint is enabled,
+	 * ignore this request.
+	 */
+	if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+		xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
+				__func__, ep);
+		return 0;
+	}
+
+	/*
+	 * Configuration and alternate setting changes must be done in
+	 * process context, not interrupt context (or so documenation
+	 * for usb_set_interface() and usb_set_configuration() claim).
+	 */
+	if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
+				udev, ep, GFP_KERNEL) < 0) {
+		dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
+				__func__, ep->desc.bEndpointAddress);
+		return -ENOMEM;
+	}
+
+	in_ctx->add_flags |= added_ctxs;
+	new_add_flags = in_ctx->add_flags;
+
+	/* If xhci_endpoint_disable() was called for this endpoint, but the
+	 * xHC hasn't been notified yet through the check_bandwidth() call,
+	 * this re-adds a new state for the endpoint from the new endpoint
+	 * descriptors.  We must drop and re-add this endpoint, so we leave the
+	 * drop flags alone.
+	 */
+	new_drop_flags = in_ctx->drop_flags;
+
+	/* Update the last valid endpoint context, if we just added one past */
+	if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+		in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+		in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+	}
+	new_slot_info = in_ctx->slot.dev_info;
+
+	xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
+			(unsigned int) ep->desc.bEndpointAddress,
+			udev->slot_id,
+			(unsigned int) new_drop_flags,
+			(unsigned int) new_add_flags,
+			(unsigned int) new_slot_info);
+	return 0;
+}
+
+static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+{
+	struct xhci_ep_ctx *ep_ctx;
+	int i;
+
+	/* When a device's add flag and drop flag are zero, any subsequent
+	 * configure endpoint command will leave that endpoint's state
+	 * untouched.  Make sure we don't leave any old state in the input
+	 * endpoint contexts.
+	 */
+	virt_dev->in_ctx->drop_flags = 0;
+	virt_dev->in_ctx->add_flags = 0;
+	virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+	/* Endpoint 0 is always valid */
+	virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+	for (i = 1; i < 31; ++i) {
+		ep_ctx = &virt_dev->in_ctx->ep[i];
+		ep_ctx->ep_info = 0;
+		ep_ctx->ep_info2 = 0;
+		ep_ctx->deq[0] = 0;
+		ep_ctx->deq[1] = 0;
+		ep_ctx->tx_info = 0;
+	}
+}
+
+/* Called after one or more calls to xhci_add_endpoint() or
+ * xhci_drop_endpoint().  If this call fails, the USB core is expected
+ * to call xhci_reset_bandwidth().
+ *
+ * Since we are in the middle of changing either configuration or
+ * installing a new alt setting, the USB core won't allow URBs to be
+ * enqueued for any endpoint on the old config or interface.  Nothing
+ * else should be touching the xhci->devs[slot_id] structure, so we
+ * don't need to take the xhci->lock for manipulating that.
+ */
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	int i;
+	int ret = 0;
+	int timeleft;
+	unsigned long flags;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device	*virt_dev;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+
+	if (!udev->slot_id || !xhci->devs || !xhci->devs[udev->slot_id]) {
+		xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+				__func__);
+		return -EINVAL;
+	}
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
+	virt_dev->in_ctx->add_flags |= SLOT_FLAG;
+	virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
+	virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
+	virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+	xhci_dbg(xhci, "New Input Control Context:\n");
+	xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
+			LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+			udev->slot_id);
+	if (ret < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
+		return -ENOMEM;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the configure endpoint command to complete */
+	timeleft = wait_for_completion_interruptible_timeout(
+			&virt_dev->cmd_completion,
+			USB_CTRL_SET_TIMEOUT);
+	if (timeleft <= 0) {
+		xhci_warn(xhci, "%s while waiting for configure endpoint command\n",
+				timeleft == 0 ? "Timeout" : "Signal");
+		/* FIXME cancel the configure endpoint command */
+		return -ETIME;
+	}
+
+	switch (virt_dev->cmd_status) {
+	case COMP_ENOMEM:
+		dev_warn(&udev->dev, "Not enough host controller resources "
+				"for new device state.\n");
+		ret = -ENOMEM;
+		/* FIXME: can we allocate more resources for the HC? */
+		break;
+	case COMP_BW_ERR:
+		dev_warn(&udev->dev, "Not enough bandwidth "
+				"for new device state.\n");
+		ret = -ENOSPC;
+		/* FIXME: can we go back to the old state? */
+		break;
+	case COMP_TRB_ERR:
+		/* the HCD set up something wrong */
+		dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, add flag = 1, "
+				"and endpoint is not disabled.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_SUCCESS:
+		dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion "
+				"code 0x%x.\n", virt_dev->cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	if (ret) {
+		/* Callee should call reset_bandwidth() */
+		return ret;
+	}
+
+	xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
+			LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+
+	xhci_zero_in_ctx(virt_dev);
+	/* Free any old rings */
+	for (i = 1; i < 31; ++i) {
+		if (virt_dev->new_ep_rings[i]) {
+			xhci_ring_free(xhci, virt_dev->ep_rings[i]);
+			virt_dev->ep_rings[i] = virt_dev->new_ep_rings[i];
+			virt_dev->new_ep_rings[i] = NULL;
+		}
+	}
+
+	return ret;
+}
+
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device	*virt_dev;
+	int i, ret;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+	if (ret <= 0)
+		return;
+	xhci = hcd_to_xhci(hcd);
+
+	if (!xhci->devs || !xhci->devs[udev->slot_id]) {
+		xhci_warn(xhci, "xHCI %s called with unaddressed device\n",
+				__func__);
+		return;
+	}
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	virt_dev = xhci->devs[udev->slot_id];
+	/* Free any rings allocated for added endpoints */
+	for (i = 0; i < 31; ++i) {
+		if (virt_dev->new_ep_rings[i]) {
+			xhci_ring_free(xhci, virt_dev->new_ep_rings[i]);
+			virt_dev->new_ep_rings[i] = NULL;
+		}
+	}
+	xhci_zero_in_ctx(virt_dev);
+}
+
+/*
+ * At this point, the struct usb_device is about to go away, the device has
+ * disconnected, and all traffic has been stopped and the endpoints have been
+ * disabled.  Free any HC data structures associated with that device.
+ */
+void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned long flags;
+
+	if (udev->slot_id == 0)
+		return;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		return;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	/*
+	 * Event command completion handler will free any data structures
+	 * associated with the slot.  XXX Can free sleep?
+	 */
+}
+
+/*
+ * Returns 0 if the xHC ran out of device slots, the Enable Slot command
+ * timed out, or allocating memory failed.  Returns 1 on success.
+ */
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned long flags;
+	int timeleft;
+	int ret;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		return 0;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* XXX: how much time for xHC slot assignment? */
+	timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+			USB_CTRL_SET_TIMEOUT);
+	if (timeleft <= 0) {
+		xhci_warn(xhci, "%s while waiting for a slot\n",
+				timeleft == 0 ? "Timeout" : "Signal");
+		/* FIXME cancel the enable slot request */
+		return 0;
+	}
+
+	if (!xhci->slot_id) {
+		xhci_err(xhci, "Error while assigning device slot ID\n");
+		return 0;
+	}
+	/* xhci_alloc_virt_device() does not touch rings; no need to lock */
+	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+		/* Disable slot, if we can do it without mem alloc */
+		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
+		spin_lock_irqsave(&xhci->lock, flags);
+		if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
+			xhci_ring_cmd_db(xhci);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return 0;
+	}
+	udev->slot_id = xhci->slot_id;
+	/* Is this a LS or FS device under a HS hub? */
+	/* Hub or peripherial? */
+	return 1;
+}
+
+/*
+ * Issue an Address Device command (which will issue a SetAddress request to
+ * the device).
+ * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
+ * we should only issue and wait on one address command at the same time.
+ *
+ * We add one to the device address issued by the hardware because the USB core
+ * uses address 1 for the root hubs (even though they're not really devices).
+ */
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	unsigned long flags;
+	int timeleft;
+	struct xhci_virt_device *virt_dev;
+	int ret = 0;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 temp;
+
+	if (!udev->slot_id) {
+		xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
+		return -EINVAL;
+	}
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/* If this is a Set Address to an unconfigured device, setup ep 0 */
+	if (!udev->config)
+		xhci_setup_addressable_virt_dev(xhci, udev);
+	/* Otherwise, assume the core has the device configured how it wants */
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
+			udev->slot_id);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		return ret;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
+	timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
+			USB_CTRL_SET_TIMEOUT);
+	/* FIXME: From section 4.3.4: "Software shall be responsible for timing
+	 * the SetAddress() "recovery interval" required by USB and aborting the
+	 * command on a timeout.
+	 */
+	if (timeleft <= 0) {
+		xhci_warn(xhci, "%s while waiting for a slot\n",
+				timeleft == 0 ? "Timeout" : "Signal");
+		/* FIXME cancel the address device command */
+		return -ETIME;
+	}
+
+	switch (virt_dev->cmd_status) {
+	case COMP_CTX_STATE:
+	case COMP_EBADSLT:
+		xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n",
+				udev->slot_id);
+		ret = -EINVAL;
+		break;
+	case COMP_TX_ERR:
+		dev_warn(&udev->dev, "Device not responding to set address.\n");
+		ret = -EPROTO;
+		break;
+	case COMP_SUCCESS:
+		xhci_dbg(xhci, "Successful Address Device command\n");
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion "
+				"code 0x%x.\n", virt_dev->cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	if (ret) {
+		return ret;
+	}
+	temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
+	xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
+	temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
+	xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
+	xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
+			udev->slot_id,
+			&xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
+			xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
+	xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+			udev->slot_id,
+			&xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
+			xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+	xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
+			(unsigned long long)virt_dev->out_ctx_dma);
+	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+	xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+	xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+	/*
+	 * USB core uses address 1 for the roothubs, so we add one to the
+	 * address given back to us by the HC.
+	 */
+	udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+	/* Zero the input context control for later use */
+	virt_dev->in_ctx->add_flags = 0;
+	virt_dev->in_ctx->drop_flags = 0;
+	/* Mirror flags in the output context for future ep enable/disable */
+	virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+	virt_dev->out_ctx->drop_flags = 0;
+
+	xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
+	/* XXX Meh, not sure if anyone else but choose_address uses this. */
+	set_bit(udev->devnum, udev->bus->devmap.devicemap);
+
+	return 0;
+}
+
+int xhci_get_frame(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	/* EHCI mods by the periodic size.  Why? */
+	return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
+}
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static int __init xhci_hcd_init(void)
+{
+#ifdef CONFIG_PCI
+	int retval = 0;
+
+	retval = xhci_register_pci();
+
+	if (retval < 0) {
+		printk(KERN_DEBUG "Problem registering PCI driver.");
+		return retval;
+	}
+#endif
+	/*
+	 * Check the compiler generated sizes of structures that must be laid
+	 * out in specific ways for hardware access.
+	 */
+	BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8);
+	/* xhci_device_control has eight fields, and also
+	 * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
+	 */
+	BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
+	BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 7*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+	/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+	return 0;
+}
+module_init(xhci_hcd_init);
+
+static void __exit xhci_hcd_cleanup(void)
+{
+#ifdef CONFIG_PCI
+	xhci_unregister_pci();
+#endif
+}
+module_exit(xhci_hcd_cleanup);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
new file mode 100644
index 00000000000..eac5b53aa9e
--- /dev/null
+++ b/drivers/usb/host/xhci-hub.c
@@ -0,0 +1,308 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/unaligned.h>
+
+#include "xhci.h"
+
+static void xhci_hub_descriptor(struct xhci_hcd *xhci,
+		struct usb_hub_descriptor *desc)
+{
+	int ports;
+	u16 temp;
+
+	ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+	/* USB 3.0 hubs have a different descriptor, but we fake this for now */
+	desc->bDescriptorType = 0x29;
+	desc->bPwrOn2PwrGood = 10;	/* xhci section 5.4.9 says 20ms max */
+	desc->bHubContrCurrent = 0;
+
+	desc->bNbrPorts = ports;
+	temp = 1 + (ports / 8);
+	desc->bDescLength = 7 + 2 * temp;
+
+	/* Why does core/hcd.h define bitmap?  It's just confusing. */
+	memset(&desc->DeviceRemovable[0], 0, temp);
+	memset(&desc->DeviceRemovable[temp], 0xff, temp);
+
+	/* Ugh, these should be #defines, FIXME */
+	/* Using table 11-13 in USB 2.0 spec. */
+	temp = 0;
+	/* Bits 1:0 - support port power switching, or power always on */
+	if (HCC_PPC(xhci->hcc_params))
+		temp |= 0x0001;
+	else
+		temp |= 0x0002;
+	/* Bit  2 - root hubs are not part of a compound device */
+	/* Bits 4:3 - individual port over current protection */
+	temp |= 0x0008;
+	/* Bits 6:5 - no TTs in root ports */
+	/* Bit  7 - no port indicators */
+	desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
+}
+
+static unsigned int xhci_port_speed(unsigned int port_status)
+{
+	if (DEV_LOWSPEED(port_status))
+		return 1 << USB_PORT_FEAT_LOWSPEED;
+	if (DEV_HIGHSPEED(port_status))
+		return 1 << USB_PORT_FEAT_HIGHSPEED;
+	if (DEV_SUPERSPEED(port_status))
+		return 1 << USB_PORT_FEAT_SUPERSPEED;
+	/*
+	 * FIXME: Yes, we should check for full speed, but the core uses that as
+	 * a default in portspeed() in usb/core/hub.c (which is the only place
+	 * USB_PORT_FEAT_*SPEED is used).
+	 */
+	return 0;
+}
+
+/*
+ * These bits are Read Only (RO) and should be saved and written to the
+ * registers: 0, 3, 10:13, 30
+ * connect status, over-current status, port speed, and device removable.
+ * connect status and port speed are also sticky - meaning they're in
+ * the AUX well and they aren't changed by a hot, warm, or cold reset.
+ */
+#define	XHCI_PORT_RO	((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
+/*
+ * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
+ * bits 5:8, 9, 14:15, 25:27
+ * link state, port power, port indicator state, "wake on" enable state
+ */
+#define XHCI_PORT_RWS	((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
+/*
+ * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
+ * bit 4 (port reset)
+ */
+#define	XHCI_PORT_RW1S	((1<<4))
+/*
+ * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
+ * bits 1, 17, 18, 19, 20, 21, 22, 23
+ * port enable/disable, and
+ * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
+ * over-current, reset, link state, and L1 change
+ */
+#define XHCI_PORT_RW1CS	((1<<1) | (0x7f<<17))
+/*
+ * Bit 16 is RW, and writing a '1' to it causes the link state control to be
+ * latched in
+ */
+#define	XHCI_PORT_RW	((1<<16))
+/*
+ * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
+ * bits 2, 24, 28:31
+ */
+#define	XHCI_PORT_RZ	((1<<2) | (1<<24) | (0xf<<28))
+
+/*
+ * Given a port state, this function returns a value that would result in the
+ * port being in the same state, if the value was written to the port status
+ * control register.
+ * Save Read Only (RO) bits and save read/write bits where
+ * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
+ * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
+ */
+static u32 xhci_port_state_to_neutral(u32 state)
+{
+	/* Save read-only status and port state */
+	return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
+}
+
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		u16 wIndex, char *buf, u16 wLength)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int ports;
+	unsigned long flags;
+	u32 temp, status;
+	int retval = 0;
+	u32 __iomem *addr;
+	char *port_change_bit;
+
+	ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	switch (typeReq) {
+	case GetHubStatus:
+		/* No power source, over-current reported per port */
+		memset(buf, 0, 4);
+		break;
+	case GetHubDescriptor:
+		xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf);
+		break;
+	case GetPortStatus:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		status = 0;
+		addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
+		temp = xhci_readl(xhci, addr);
+		xhci_dbg(xhci, "get port status, actual port %d status  = 0x%x\n", wIndex, temp);
+
+		/* wPortChange bits */
+		if (temp & PORT_CSC)
+			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+		if (temp & PORT_PEC)
+			status |= 1 << USB_PORT_FEAT_C_ENABLE;
+		if ((temp & PORT_OCC))
+			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+		/*
+		 * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
+		 * changes
+		 */
+		if (temp & PORT_CONNECT) {
+			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= xhci_port_speed(temp);
+		}
+		if (temp & PORT_PE)
+			status |= 1 << USB_PORT_FEAT_ENABLE;
+		if (temp & PORT_OC)
+			status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+		if (temp & PORT_RESET)
+			status |= 1 << USB_PORT_FEAT_RESET;
+		if (temp & PORT_POWER)
+			status |= 1 << USB_PORT_FEAT_POWER;
+		xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
+		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
+		break;
+	case SetPortFeature:
+		wIndex &= 0xff;
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
+		temp = xhci_readl(xhci, addr);
+		temp = xhci_port_state_to_neutral(temp);
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			/*
+			 * Turn on ports, even if there isn't per-port switching.
+			 * HC will report connect events even before this is set.
+			 * However, khubd will ignore the roothub events until
+			 * the roothub is registered.
+			 */
+			xhci_writel(xhci, temp | PORT_POWER, addr);
+
+			temp = xhci_readl(xhci, addr);
+			xhci_dbg(xhci, "set port power, actual port %d status  = 0x%x\n", wIndex, temp);
+			break;
+		case USB_PORT_FEAT_RESET:
+			temp = (temp | PORT_RESET);
+			xhci_writel(xhci, temp, addr);
+
+			temp = xhci_readl(xhci, addr);
+			xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
+			break;
+		default:
+			goto error;
+		}
+		temp = xhci_readl(xhci, addr); /* unblock any posted writes */
+		break;
+	case ClearPortFeature:
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		addr = &xhci->op_regs->port_status_base +
+			NUM_PORT_REGS*(wIndex & 0xff);
+		temp = xhci_readl(xhci, addr);
+		temp = xhci_port_state_to_neutral(temp);
+		switch (wValue) {
+		case USB_PORT_FEAT_C_RESET:
+			status = PORT_RC;
+			port_change_bit = "reset";
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			status = PORT_CSC;
+			port_change_bit = "connect";
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			status = PORT_OCC;
+			port_change_bit = "over-current";
+			break;
+		default:
+			goto error;
+		}
+		/* Change bits are all write 1 to clear */
+		xhci_writel(xhci, temp | status, addr);
+		temp = xhci_readl(xhci, addr);
+		xhci_dbg(xhci, "clear port %s change, actual port %d status  = 0x%x\n",
+				port_change_bit, wIndex, temp);
+		temp = xhci_readl(xhci, addr); /* unblock any posted writes */
+		break;
+	default:
+error:
+		/* "stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return retval;
+}
+
+/*
+ * Returns 0 if the status hasn't changed, or the number of bytes in buf.
+ * Ports are 0-indexed from the HCD point of view,
+ * and 1-indexed from the USB core pointer of view.
+ * xHCI instances can have up to 127 ports, so FIXME if you see more than 15.
+ *
+ * Note that the status change bits will be cleared as soon as a port status
+ * change event is generated, so we use the saved status from that event.
+ */
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	unsigned long flags;
+	u32 temp, status;
+	int i, retval;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int ports;
+	u32 __iomem *addr;
+
+	ports = HCS_MAX_PORTS(xhci->hcs_params1);
+
+	/* Initial status is no changes */
+	buf[0] = 0;
+	status = 0;
+	if (ports > 7) {
+		buf[1] = 0;
+		retval = 2;
+	} else {
+		retval = 1;
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	/* For each port, did anything change?  If so, set that bit in buf. */
+	for (i = 0; i < ports; i++) {
+		addr = &xhci->op_regs->port_status_base +
+			NUM_PORT_REGS*i;
+		temp = xhci_readl(xhci, addr);
+		if (temp & (PORT_CSC | PORT_PEC | PORT_OCC)) {
+			if (i < 7)
+				buf[0] |= 1 << (i + 1);
+			else
+				buf[1] |= 1 << (i - 7);
+			status = 1;
+		}
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return status ? retval : 0;
+}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
new file mode 100644
index 00000000000..c8a72de1c50
--- /dev/null
+++ b/drivers/usb/host/xhci-mem.c
@@ -0,0 +1,769 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/usb.h>
+#include <linux/pci.h>
+#include <linux/dmapool.h>
+
+#include "xhci.h"
+
+/*
+ * Allocates a generic ring segment from the ring pool, sets the dma address,
+ * initializes the segment to zero, and sets the private next pointer to NULL.
+ *
+ * Section 4.11.1.1:
+ * "All components of all Command and Transfer TRBs shall be initialized to '0'"
+ */
+static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+	struct xhci_segment *seg;
+	dma_addr_t	dma;
+
+	seg = kzalloc(sizeof *seg, flags);
+	if (!seg)
+		return 0;
+	xhci_dbg(xhci, "Allocating priv segment structure at %p\n", seg);
+
+	seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
+	if (!seg->trbs) {
+		kfree(seg);
+		return 0;
+	}
+	xhci_dbg(xhci, "// Allocating segment at %p (virtual) 0x%llx (DMA)\n",
+			seg->trbs, (unsigned long long)dma);
+
+	memset(seg->trbs, 0, SEGMENT_SIZE);
+	seg->dma = dma;
+	seg->next = NULL;
+
+	return seg;
+}
+
+static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
+{
+	if (!seg)
+		return;
+	if (seg->trbs) {
+		xhci_dbg(xhci, "Freeing DMA segment at %p (virtual) 0x%llx (DMA)\n",
+				seg->trbs, (unsigned long long)seg->dma);
+		dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
+		seg->trbs = NULL;
+	}
+	xhci_dbg(xhci, "Freeing priv segment structure at %p\n", seg);
+	kfree(seg);
+}
+
+/*
+ * Make the prev segment point to the next segment.
+ *
+ * Change the last TRB in the prev segment to be a Link TRB which points to the
+ * DMA address of the next segment.  The caller needs to set any Link TRB
+ * related flags, such as End TRB, Toggle Cycle, and no snoop.
+ */
+static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
+		struct xhci_segment *next, bool link_trbs)
+{
+	u32 val;
+
+	if (!prev || !next)
+		return;
+	prev->next = next;
+	if (link_trbs) {
+		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+
+		/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
+		val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
+		val &= ~TRB_TYPE_BITMASK;
+		val |= TRB_TYPE(TRB_LINK);
+		prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
+	}
+	xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
+			(unsigned long long)prev->dma,
+			(unsigned long long)next->dma);
+}
+
+/* XXX: Do we need the hcd structure in all these functions? */
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+	struct xhci_segment *seg;
+	struct xhci_segment *first_seg;
+
+	if (!ring || !ring->first_seg)
+		return;
+	first_seg = ring->first_seg;
+	seg = first_seg->next;
+	xhci_dbg(xhci, "Freeing ring at %p\n", ring);
+	while (seg != first_seg) {
+		struct xhci_segment *next = seg->next;
+		xhci_segment_free(xhci, seg);
+		seg = next;
+	}
+	xhci_segment_free(xhci, first_seg);
+	ring->first_seg = NULL;
+	kfree(ring);
+}
+
+/**
+ * Create a new ring with zero or more segments.
+ *
+ * Link each segment together into a ring.
+ * Set the end flag and the cycle toggle bit on the last segment.
+ * See section 4.9.1 and figures 15 and 16.
+ */
+static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
+		unsigned int num_segs, bool link_trbs, gfp_t flags)
+{
+	struct xhci_ring	*ring;
+	struct xhci_segment	*prev;
+
+	ring = kzalloc(sizeof *(ring), flags);
+	xhci_dbg(xhci, "Allocating ring at %p\n", ring);
+	if (!ring)
+		return 0;
+
+	INIT_LIST_HEAD(&ring->td_list);
+	INIT_LIST_HEAD(&ring->cancelled_td_list);
+	if (num_segs == 0)
+		return ring;
+
+	ring->first_seg = xhci_segment_alloc(xhci, flags);
+	if (!ring->first_seg)
+		goto fail;
+	num_segs--;
+
+	prev = ring->first_seg;
+	while (num_segs > 0) {
+		struct xhci_segment	*next;
+
+		next = xhci_segment_alloc(xhci, flags);
+		if (!next)
+			goto fail;
+		xhci_link_segments(xhci, prev, next, link_trbs);
+
+		prev = next;
+		num_segs--;
+	}
+	xhci_link_segments(xhci, prev, ring->first_seg, link_trbs);
+
+	if (link_trbs) {
+		/* See section 4.9.2.1 and 6.4.4.1 */
+		prev->trbs[TRBS_PER_SEGMENT-1].link.control |= (LINK_TOGGLE);
+		xhci_dbg(xhci, "Wrote link toggle flag to"
+				" segment %p (virtual), 0x%llx (DMA)\n",
+				prev, (unsigned long long)prev->dma);
+	}
+	/* The ring is empty, so the enqueue pointer == dequeue pointer */
+	ring->enqueue = ring->first_seg->trbs;
+	ring->enq_seg = ring->first_seg;
+	ring->dequeue = ring->enqueue;
+	ring->deq_seg = ring->first_seg;
+	/* The ring is initialized to 0. The producer must write 1 to the cycle
+	 * bit to handover ownership of the TRB, so PCS = 1.  The consumer must
+	 * compare CCS to the cycle bit to check ownership, so CCS = 1.
+	 */
+	ring->cycle_state = 1;
+
+	return ring;
+
+fail:
+	xhci_ring_free(xhci, ring);
+	return 0;
+}
+
+/* All the xhci_tds in the ring's TD list should be freed at this point */
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *dev;
+	int i;
+
+	/* Slot ID 0 is reserved */
+	if (slot_id == 0 || !xhci->devs[slot_id])
+		return;
+
+	dev = xhci->devs[slot_id];
+	xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
+	xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+	if (!dev)
+		return;
+
+	for (i = 0; i < 31; ++i)
+		if (dev->ep_rings[i])
+			xhci_ring_free(xhci, dev->ep_rings[i]);
+
+	if (dev->in_ctx)
+		dma_pool_free(xhci->device_pool,
+				dev->in_ctx, dev->in_ctx_dma);
+	if (dev->out_ctx)
+		dma_pool_free(xhci->device_pool,
+				dev->out_ctx, dev->out_ctx_dma);
+	kfree(xhci->devs[slot_id]);
+	xhci->devs[slot_id] = 0;
+}
+
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
+		struct usb_device *udev, gfp_t flags)
+{
+	dma_addr_t	dma;
+	struct xhci_virt_device *dev;
+
+	/* Slot ID 0 is reserved */
+	if (slot_id == 0 || xhci->devs[slot_id]) {
+		xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
+		return 0;
+	}
+
+	xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
+	if (!xhci->devs[slot_id])
+		return 0;
+	dev = xhci->devs[slot_id];
+
+	/* Allocate the (output) device context that will be used in the HC */
+	dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+	if (!dev->out_ctx)
+		goto fail;
+	dev->out_ctx_dma = dma;
+	xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
+			(unsigned long long)dma);
+	memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+
+	/* Allocate the (input) device context for address device command */
+	dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+	if (!dev->in_ctx)
+		goto fail;
+	dev->in_ctx_dma = dma;
+	xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
+			(unsigned long long)dma);
+	memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+
+	/* Allocate endpoint 0 ring */
+	dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
+	if (!dev->ep_rings[0])
+		goto fail;
+
+	init_completion(&dev->cmd_completion);
+
+	/*
+	 * Point to output device context in dcbaa; skip the output control
+	 * context, which is eight 32 bit fields (or 32 bytes long)
+	 */
+	xhci->dcbaa->dev_context_ptrs[2*slot_id] =
+		(u32) dev->out_ctx_dma + (32);
+	xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
+			slot_id,
+			&xhci->dcbaa->dev_context_ptrs[2*slot_id],
+			(unsigned long long)dev->out_ctx_dma);
+	xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+
+	return 1;
+fail:
+	xhci_free_virt_device(xhci, slot_id);
+	return 0;
+}
+
+/* Setup an xHCI virtual device for a Set Address command */
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
+{
+	struct xhci_virt_device *dev;
+	struct xhci_ep_ctx	*ep0_ctx;
+	struct usb_device	*top_dev;
+
+	dev = xhci->devs[udev->slot_id];
+	/* Slot ID 0 is reserved */
+	if (udev->slot_id == 0 || !dev) {
+		xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
+				udev->slot_id);
+		return -EINVAL;
+	}
+	ep0_ctx = &dev->in_ctx->ep[0];
+
+	/* 2) New slot context and endpoint 0 context are valid*/
+	dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+
+	/* 3) Only the control endpoint is valid - one endpoint context */
+	dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+
+	switch (udev->speed) {
+	case USB_SPEED_SUPER:
+		dev->in_ctx->slot.dev_info |= (u32) udev->route;
+		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+		break;
+	case USB_SPEED_HIGH:
+		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+		break;
+	case USB_SPEED_FULL:
+		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+		break;
+	case USB_SPEED_LOW:
+		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+		break;
+	case USB_SPEED_VARIABLE:
+		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+		return -EINVAL;
+		break;
+	default:
+		/* Speed was set earlier, this shouldn't happen. */
+		BUG();
+	}
+	/* Find the root hub port this device is under */
+	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+			top_dev = top_dev->parent)
+		/* Found device below root hub */;
+	dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+	xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
+
+	/* Is this a LS/FS device under a HS hub? */
+	/*
+	 * FIXME: I don't think this is right, where does the TT info for the
+	 * roothub or parent hub come from?
+	 */
+	if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
+			udev->tt) {
+		dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
+		dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+	}
+	xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
+	xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
+
+	/* Step 4 - ring already allocated */
+	/* Step 5 */
+	ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
+	/*
+	 * See section 4.3 bullet 6:
+	 * The default Max Packet size for ep0 is "8 bytes for a USB2
+	 * LS/FS/HS device or 512 bytes for a USB3 SS device"
+	 * XXX: Not sure about wireless USB devices.
+	 */
+	if (udev->speed == USB_SPEED_SUPER)
+		ep0_ctx->ep_info2 |= MAX_PACKET(512);
+	else
+		ep0_ctx->ep_info2 |= MAX_PACKET(8);
+	/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
+	ep0_ctx->ep_info2 |= MAX_BURST(0);
+	ep0_ctx->ep_info2 |= ERROR_COUNT(3);
+
+	ep0_ctx->deq[0] =
+		dev->ep_rings[0]->first_seg->dma;
+	ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
+	ep0_ctx->deq[1] = 0;
+
+	/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
+
+	return 0;
+}
+
+/* Return the polling or NAK interval.
+ *
+ * The polling interval is expressed in "microframes".  If xHCI's Interval field
+ * is set to N, it will service the endpoint every 2^(Interval)*125us.
+ *
+ * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
+ * is set to 0.
+ */
+static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval = 0;
+
+	switch (udev->speed) {
+	case USB_SPEED_HIGH:
+		/* Max NAK rate */
+		if (usb_endpoint_xfer_control(&ep->desc) ||
+				usb_endpoint_xfer_bulk(&ep->desc))
+			interval = ep->desc.bInterval;
+		/* Fall through - SS and HS isoc/int have same decoding */
+	case USB_SPEED_SUPER:
+		if (usb_endpoint_xfer_int(&ep->desc) ||
+				usb_endpoint_xfer_isoc(&ep->desc)) {
+			if (ep->desc.bInterval == 0)
+				interval = 0;
+			else
+				interval = ep->desc.bInterval - 1;
+			if (interval > 15)
+				interval = 15;
+			if (interval != ep->desc.bInterval + 1)
+				dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
+						ep->desc.bEndpointAddress, 1 << interval);
+		}
+		break;
+	/* Convert bInterval (in 1-255 frames) to microframes and round down to
+	 * nearest power of 2.
+	 */
+	case USB_SPEED_FULL:
+	case USB_SPEED_LOW:
+		if (usb_endpoint_xfer_int(&ep->desc) ||
+				usb_endpoint_xfer_isoc(&ep->desc)) {
+			interval = fls(8*ep->desc.bInterval) - 1;
+			if (interval > 10)
+				interval = 10;
+			if (interval < 3)
+				interval = 3;
+			if ((1 << interval) != 8*ep->desc.bInterval)
+				dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
+						ep->desc.bEndpointAddress, 1 << interval);
+		}
+		break;
+	default:
+		BUG();
+	}
+	return EP_INTERVAL(interval);
+}
+
+static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	int in;
+	u32 type;
+
+	in = usb_endpoint_dir_in(&ep->desc);
+	if (usb_endpoint_xfer_control(&ep->desc)) {
+		type = EP_TYPE(CTRL_EP);
+	} else if (usb_endpoint_xfer_bulk(&ep->desc)) {
+		if (in)
+			type = EP_TYPE(BULK_IN_EP);
+		else
+			type = EP_TYPE(BULK_OUT_EP);
+	} else if (usb_endpoint_xfer_isoc(&ep->desc)) {
+		if (in)
+			type = EP_TYPE(ISOC_IN_EP);
+		else
+			type = EP_TYPE(ISOC_OUT_EP);
+	} else if (usb_endpoint_xfer_int(&ep->desc)) {
+		if (in)
+			type = EP_TYPE(INT_IN_EP);
+		else
+			type = EP_TYPE(INT_OUT_EP);
+	} else {
+		BUG();
+	}
+	return type;
+}
+
+int xhci_endpoint_init(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_device *udev,
+		struct usb_host_endpoint *ep,
+		gfp_t mem_flags)
+{
+	unsigned int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_ring *ep_ring;
+	unsigned int max_packet;
+	unsigned int max_burst;
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+
+	/* Set up the endpoint ring */
+	virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
+	if (!virt_dev->new_ep_rings[ep_index])
+		return -ENOMEM;
+	ep_ring = virt_dev->new_ep_rings[ep_index];
+	ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
+	ep_ctx->deq[1] = 0;
+
+	ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
+
+	/* FIXME dig Mult and streams info out of ep companion desc */
+
+	/* Allow 3 retries for everything but isoc */
+	if (!usb_endpoint_xfer_isoc(&ep->desc))
+		ep_ctx->ep_info2 = ERROR_COUNT(3);
+	else
+		ep_ctx->ep_info2 = ERROR_COUNT(0);
+
+	ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
+
+	/* Set the max packet size and max burst */
+	switch (udev->speed) {
+	case USB_SPEED_SUPER:
+		max_packet = ep->desc.wMaxPacketSize;
+		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
+		/* dig out max burst from ep companion desc */
+		max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+		ep_ctx->ep_info2 |= MAX_BURST(max_packet);
+		break;
+	case USB_SPEED_HIGH:
+		/* bits 11:12 specify the number of additional transaction
+		 * opportunities per microframe (USB 2.0, section 9.6.6)
+		 */
+		if (usb_endpoint_xfer_isoc(&ep->desc) ||
+				usb_endpoint_xfer_int(&ep->desc)) {
+			max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
+			ep_ctx->ep_info2 |= MAX_BURST(max_burst);
+		}
+		/* Fall through */
+	case USB_SPEED_FULL:
+	case USB_SPEED_LOW:
+		max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
+		break;
+	default:
+		BUG();
+	}
+	/* FIXME Debug endpoint context */
+	return 0;
+}
+
+void xhci_endpoint_zero(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+
+	ep_ctx->ep_info = 0;
+	ep_ctx->ep_info2 = 0;
+	ep_ctx->deq[0] = 0;
+	ep_ctx->deq[1] = 0;
+	ep_ctx->tx_info = 0;
+	/* Don't free the endpoint ring until the set interface or configuration
+	 * request succeeds.
+	 */
+}
+
+void xhci_mem_cleanup(struct xhci_hcd *xhci)
+{
+	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	int size;
+	int i;
+
+	/* Free the Event Ring Segment Table and the actual Event Ring */
+	xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
+	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
+	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
+	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
+	if (xhci->erst.entries)
+		pci_free_consistent(pdev, size,
+				xhci->erst.entries, xhci->erst.erst_dma_addr);
+	xhci->erst.entries = NULL;
+	xhci_dbg(xhci, "Freed ERST\n");
+	if (xhci->event_ring)
+		xhci_ring_free(xhci, xhci->event_ring);
+	xhci->event_ring = NULL;
+	xhci_dbg(xhci, "Freed event ring\n");
+
+	xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
+	xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+	if (xhci->cmd_ring)
+		xhci_ring_free(xhci, xhci->cmd_ring);
+	xhci->cmd_ring = NULL;
+	xhci_dbg(xhci, "Freed command ring\n");
+
+	for (i = 1; i < MAX_HC_SLOTS; ++i)
+		xhci_free_virt_device(xhci, i);
+
+	if (xhci->segment_pool)
+		dma_pool_destroy(xhci->segment_pool);
+	xhci->segment_pool = NULL;
+	xhci_dbg(xhci, "Freed segment pool\n");
+
+	if (xhci->device_pool)
+		dma_pool_destroy(xhci->device_pool);
+	xhci->device_pool = NULL;
+	xhci_dbg(xhci, "Freed device context pool\n");
+
+	xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
+	xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+	if (xhci->dcbaa)
+		pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
+				xhci->dcbaa, xhci->dcbaa->dma);
+	xhci->dcbaa = NULL;
+
+	xhci->page_size = 0;
+	xhci->page_shift = 0;
+}
+
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
+{
+	dma_addr_t	dma;
+	struct device	*dev = xhci_to_hcd(xhci)->self.controller;
+	unsigned int	val, val2;
+	struct xhci_segment	*seg;
+	u32 page_size;
+	int i;
+
+	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
+	xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
+	for (i = 0; i < 16; i++) {
+		if ((0x1 & page_size) != 0)
+			break;
+		page_size = page_size >> 1;
+	}
+	if (i < 16)
+		xhci_dbg(xhci, "Supported page size of %iK\n", (1 << (i+12)) / 1024);
+	else
+		xhci_warn(xhci, "WARN: no supported page size\n");
+	/* Use 4K pages, since that's common and the minimum the HC supports */
+	xhci->page_shift = 12;
+	xhci->page_size = 1 << xhci->page_shift;
+	xhci_dbg(xhci, "HCD page size set to %iK\n", xhci->page_size / 1024);
+
+	/*
+	 * Program the Number of Device Slots Enabled field in the CONFIG
+	 * register with the max value of slots the HC can handle.
+	 */
+	val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
+	xhci_dbg(xhci, "// xHC can handle at most %d device slots.\n",
+			(unsigned int) val);
+	val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
+	val |= (val2 & ~HCS_SLOTS_MASK);
+	xhci_dbg(xhci, "// Setting Max device slots reg = 0x%x.\n",
+			(unsigned int) val);
+	xhci_writel(xhci, val, &xhci->op_regs->config_reg);
+
+	/*
+	 * Section 5.4.8 - doorbell array must be
+	 * "physically contiguous and 64-byte (cache line) aligned".
+	 */
+	xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev),
+			sizeof(*xhci->dcbaa), &dma);
+	if (!xhci->dcbaa)
+		goto fail;
+	memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
+	xhci->dcbaa->dma = dma;
+	xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
+			(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
+	xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
+	xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+
+	/*
+	 * Initialize the ring segment pool.  The ring must be a contiguous
+	 * structure comprised of TRBs.  The TRBs must be 16 byte aligned,
+	 * however, the command ring segment needs 64-byte aligned segments,
+	 * so we pick the greater alignment need.
+	 */
+	xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
+			SEGMENT_SIZE, 64, xhci->page_size);
+	/* See Table 46 and Note on Figure 55 */
+	/* FIXME support 64-byte contexts */
+	xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
+			sizeof(struct xhci_device_control),
+			64, xhci->page_size);
+	if (!xhci->segment_pool || !xhci->device_pool)
+		goto fail;
+
+	/* Set up the command ring to have one segments for now. */
+	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
+	if (!xhci->cmd_ring)
+		goto fail;
+	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
+	xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
+			(unsigned long long)xhci->cmd_ring->first_seg->dma);
+
+	/* Set the address in the Command Ring Control register */
+	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
+	val = (val & ~CMD_RING_ADDR_MASK) |
+		(xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+		xhci->cmd_ring->cycle_state;
+	xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
+	xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
+	xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
+	xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+	xhci_dbg_cmd_ptrs(xhci);
+
+	val = xhci_readl(xhci, &xhci->cap_regs->db_off);
+	val &= DBOFF_MASK;
+	xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
+			" from cap regs base addr\n", val);
+	xhci->dba = (void *) xhci->cap_regs + val;
+	xhci_dbg_regs(xhci);
+	xhci_print_run_regs(xhci);
+	/* Set ir_set to interrupt register set 0 */
+	xhci->ir_set = (void *) xhci->run_regs->ir_set;
+
+	/*
+	 * Event ring setup: Allocate a normal ring, but also setup
+	 * the event ring segment table (ERST).  Section 4.9.3.
+	 */
+	xhci_dbg(xhci, "// Allocating event ring\n");
+	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags);
+	if (!xhci->event_ring)
+		goto fail;
+
+	xhci->erst.entries = pci_alloc_consistent(to_pci_dev(dev),
+			sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS, &dma);
+	if (!xhci->erst.entries)
+		goto fail;
+	xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n",
+			(unsigned long long)dma);
+
+	memset(xhci->erst.entries, 0, sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS);
+	xhci->erst.num_entries = ERST_NUM_SEGS;
+	xhci->erst.erst_dma_addr = dma;
+	xhci_dbg(xhci, "Set ERST to 0; private num segs = %i, virt addr = %p, dma addr = 0x%llx\n",
+			xhci->erst.num_entries,
+			xhci->erst.entries,
+			(unsigned long long)xhci->erst.erst_dma_addr);
+
+	/* set ring base address and size for each segment table entry */
+	for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
+		struct xhci_erst_entry *entry = &xhci->erst.entries[val];
+		entry->seg_addr[0] = seg->dma;
+		entry->seg_addr[1] = 0;
+		entry->seg_size = TRBS_PER_SEGMENT;
+		entry->rsvd = 0;
+		seg = seg->next;
+	}
+
+	/* set ERST count with the number of entries in the segment table */
+	val = xhci_readl(xhci, &xhci->ir_set->erst_size);
+	val &= ERST_SIZE_MASK;
+	val |= ERST_NUM_SEGS;
+	xhci_dbg(xhci, "// Write ERST size = %i to ir_set 0 (some bits preserved)\n",
+			val);
+	xhci_writel(xhci, val, &xhci->ir_set->erst_size);
+
+	xhci_dbg(xhci, "// Set ERST entries to point to event ring.\n");
+	/* set the segment table base address */
+	xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
+			(unsigned long long)xhci->erst.erst_dma_addr);
+	val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
+	val &= ERST_PTR_MASK;
+	val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
+	xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
+	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+
+	/* Set the event ring dequeue address */
+	xhci_set_hc_event_deq(xhci);
+	xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
+	xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+	/*
+	 * XXX: Might need to set the Interrupter Moderation Register to
+	 * something other than the default (~1ms minimum between interrupts).
+	 * See section 5.5.1.2.
+	 */
+	init_completion(&xhci->addr_dev);
+	for (i = 0; i < MAX_HC_SLOTS; ++i)
+		xhci->devs[i] = 0;
+
+	return 0;
+fail:
+	xhci_warn(xhci, "Couldn't initialize memory\n");
+	xhci_mem_cleanup(xhci);
+	return -ENOMEM;
+}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
new file mode 100644
index 00000000000..1462709e26c
--- /dev/null
+++ b/drivers/usb/host/xhci-pci.c
@@ -0,0 +1,166 @@
+/*
+ * xHCI host controller driver PCI Bus Glue.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+
+#include "xhci.h"
+
+static const char hcd_name[] = "xhci_hcd";
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
+{
+	/*
+	 * TODO: Implement finding debug ports later.
+	 * TODO: see if there are any quirks that need to be added to handle
+	 * new extended capabilities.
+	 */
+
+	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+	if (!pci_set_mwi(pdev))
+		xhci_dbg(xhci, "MWI active\n");
+
+	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
+	return 0;
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval;
+
+	xhci->cap_regs = hcd->regs;
+	xhci->op_regs = hcd->regs +
+		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
+	xhci->run_regs = hcd->regs +
+		(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+	/* Cache read-only capability registers */
+	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+	xhci_print_registers(xhci);
+
+	/* Make sure the HC is halted. */
+	retval = xhci_halt(xhci);
+	if (retval)
+		return retval;
+
+	xhci_dbg(xhci, "Resetting HCD\n");
+	/* Reset the internal HC memory state and registers. */
+	retval = xhci_reset(xhci);
+	if (retval)
+		return retval;
+	xhci_dbg(xhci, "Reset complete\n");
+
+	xhci_dbg(xhci, "Calling HCD init\n");
+	/* Initialize HCD and host controller data structures. */
+	retval = xhci_init(hcd);
+	if (retval)
+		return retval;
+	xhci_dbg(xhci, "Called HCD init\n");
+
+	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
+	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
+
+	/* Find any debug ports */
+	return xhci_pci_reinit(xhci, pdev);
+}
+
+static const struct hc_driver xhci_pci_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"xHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct xhci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			xhci_irq,
+	.flags =		HCD_MEMORY | HCD_USB3,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		xhci_pci_setup,
+	.start =		xhci_run,
+	/* suspend and resume implemented later */
+	.stop =			xhci_stop,
+	.shutdown =		xhci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		xhci_urb_enqueue,
+	.urb_dequeue =		xhci_urb_dequeue,
+	.alloc_dev =		xhci_alloc_dev,
+	.free_dev =		xhci_free_dev,
+	.add_endpoint =		xhci_add_endpoint,
+	.drop_endpoint =	xhci_drop_endpoint,
+	.check_bandwidth =	xhci_check_bandwidth,
+	.reset_bandwidth =	xhci_reset_bandwidth,
+	.address_device =	xhci_address_device,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	xhci_get_frame,
+
+	/* Root hub support */
+	.hub_control =		xhci_hub_control,
+	.hub_status_data =	xhci_hub_status_data,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids[] = { {
+	/* handle any USB 3.0 xHCI controller */
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
+	.driver_data =	(unsigned long) &xhci_pci_hc_driver,
+	},
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver xhci_pci_driver = {
+	.name =		(char *) hcd_name,
+	.id_table =	pci_ids,
+
+	.probe =	usb_hcd_pci_probe,
+	.remove =	usb_hcd_pci_remove,
+	/* suspend and resume implemented later */
+
+	.shutdown = 	usb_hcd_pci_shutdown,
+};
+
+int xhci_register_pci()
+{
+	return pci_register_driver(&xhci_pci_driver);
+}
+
+void xhci_unregister_pci()
+{
+	pci_unregister_driver(&xhci_pci_driver);
+}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
new file mode 100644
index 00000000000..02d81985c45
--- /dev/null
+++ b/drivers/usb/host/xhci-ring.c
@@ -0,0 +1,1648 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Ring initialization rules:
+ * 1. Each segment is initialized to zero, except for link TRBs.
+ * 2. Ring cycle state = 0.  This represents Producer Cycle State (PCS) or
+ *    Consumer Cycle State (CCS), depending on ring function.
+ * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
+ *
+ * Ring behavior rules:
+ * 1. A ring is empty if enqueue == dequeue.  This means there will always be at
+ *    least one free TRB in the ring.  This is useful if you want to turn that
+ *    into a link TRB and expand the ring.
+ * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
+ *    link TRB, then load the pointer with the address in the link TRB.  If the
+ *    link TRB had its toggle bit set, you may need to update the ring cycle
+ *    state (see cycle bit rules).  You may have to do this multiple times
+ *    until you reach a non-link TRB.
+ * 3. A ring is full if enqueue++ (for the definition of increment above)
+ *    equals the dequeue pointer.
+ *
+ * Cycle bit rules:
+ * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
+ *    in a link TRB, it must toggle the ring cycle state.
+ * 2. When a producer increments an enqueue pointer and encounters a toggle bit
+ *    in a link TRB, it must toggle the ring cycle state.
+ *
+ * Producer rules:
+ * 1. Check if ring is full before you enqueue.
+ * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
+ *    Update enqueue pointer between each write (which may update the ring
+ *    cycle state).
+ * 3. Notify consumer.  If SW is producer, it rings the doorbell for command
+ *    and endpoint rings.  If HC is the producer for the event ring,
+ *    and it generates an interrupt according to interrupt modulation rules.
+ *
+ * Consumer rules:
+ * 1. Check if TRB belongs to you.  If the cycle bit == your ring cycle state,
+ *    the TRB is owned by the consumer.
+ * 2. Update dequeue pointer (which may update the ring cycle state) and
+ *    continue processing TRBs until you reach a TRB which is not owned by you.
+ * 3. Notify the producer.  SW is the consumer for the event ring, and it
+ *   updates event ring dequeue pointer.  HC is the consumer for the command and
+ *   endpoint rings; it generates events on the event ring for these.
+ */
+
+#include <linux/scatterlist.h>
+#include "xhci.h"
+
+/*
+ * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
+ * address of the TRB.
+ */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
+		union xhci_trb *trb)
+{
+	unsigned long segment_offset;
+
+	if (!seg || !trb || trb < seg->trbs)
+		return 0;
+	/* offset in TRBs */
+	segment_offset = trb - seg->trbs;
+	if (segment_offset > TRBS_PER_SEGMENT)
+		return 0;
+	return seg->dma + (segment_offset * sizeof(*trb));
+}
+
+/* Does this link TRB point to the first segment in a ring,
+ * or was the previous TRB the last TRB on the last segment in the ERST?
+ */
+static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		struct xhci_segment *seg, union xhci_trb *trb)
+{
+	if (ring == xhci->event_ring)
+		return (trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
+			(seg->next == xhci->event_ring->first_seg);
+	else
+		return trb->link.control & LINK_TOGGLE;
+}
+
+/* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
+ * segment?  I.e. would the updated event TRB pointer step off the end of the
+ * event seg?
+ */
+static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		struct xhci_segment *seg, union xhci_trb *trb)
+{
+	if (ring == xhci->event_ring)
+		return trb == &seg->trbs[TRBS_PER_SEGMENT];
+	else
+		return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK);
+}
+
+/* Updates trb to point to the next TRB in the ring, and updates seg if the next
+ * TRB is in a new segment.  This does not skip over link TRBs, and it does not
+ * effect the ring dequeue or enqueue pointers.
+ */
+static void next_trb(struct xhci_hcd *xhci,
+		struct xhci_ring *ring,
+		struct xhci_segment **seg,
+		union xhci_trb **trb)
+{
+	if (last_trb(xhci, ring, *seg, *trb)) {
+		*seg = (*seg)->next;
+		*trb = ((*seg)->trbs);
+	} else {
+		*trb = (*trb)++;
+	}
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
+ */
+static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+{
+	union xhci_trb *next = ++(ring->dequeue);
+
+	ring->deq_updates++;
+	/* Update the dequeue pointer further if that was a link TRB or we're at
+	 * the end of an event ring segment (which doesn't have link TRBS)
+	 */
+	while (last_trb(xhci, ring, ring->deq_seg, next)) {
+		if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) {
+			ring->cycle_state = (ring->cycle_state ? 0 : 1);
+			if (!in_interrupt())
+				xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
+						ring,
+						(unsigned int) ring->cycle_state);
+		}
+		ring->deq_seg = ring->deq_seg->next;
+		ring->dequeue = ring->deq_seg->trbs;
+		next = ring->dequeue;
+	}
+}
+
+/*
+ * See Cycle bit rules. SW is the consumer for the event ring only.
+ * Don't make a ring full of link TRBs.  That would be dumb and this would loop.
+ *
+ * If we've just enqueued a TRB that is in the middle of a TD (meaning the
+ * chain bit is set), then set the chain bit in all the following link TRBs.
+ * If we've enqueued the last TRB in a TD, make sure the following link TRBs
+ * have their chain bit cleared (so that each Link TRB is a separate TD).
+ *
+ * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
+ * set, but other sections talk about dealing with the chain bit set.
+ * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB.
+ */
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+{
+	u32 chain;
+	union xhci_trb *next;
+
+	chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
+	next = ++(ring->enqueue);
+
+	ring->enq_updates++;
+	/* Update the dequeue pointer further if that was a link TRB or we're at
+	 * the end of an event ring segment (which doesn't have link TRBS)
+	 */
+	while (last_trb(xhci, ring, ring->enq_seg, next)) {
+		if (!consumer) {
+			if (ring != xhci->event_ring) {
+				next->link.control &= ~TRB_CHAIN;
+				next->link.control |= chain;
+				/* Give this link TRB to the hardware */
+				wmb();
+				if (next->link.control & TRB_CYCLE)
+					next->link.control &= (u32) ~TRB_CYCLE;
+				else
+					next->link.control |= (u32) TRB_CYCLE;
+			}
+			/* Toggle the cycle bit after the last ring segment. */
+			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
+				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+				if (!in_interrupt())
+					xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
+							ring,
+							(unsigned int) ring->cycle_state);
+			}
+		}
+		ring->enq_seg = ring->enq_seg->next;
+		ring->enqueue = ring->enq_seg->trbs;
+		next = ring->enqueue;
+	}
+}
+
+/*
+ * Check to see if there's room to enqueue num_trbs on the ring.  See rules
+ * above.
+ * FIXME: this would be simpler and faster if we just kept track of the number
+ * of free TRBs in a ring.
+ */
+static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		unsigned int num_trbs)
+{
+	int i;
+	union xhci_trb *enq = ring->enqueue;
+	struct xhci_segment *enq_seg = ring->enq_seg;
+
+	/* Check if ring is empty */
+	if (enq == ring->dequeue)
+		return 1;
+	/* Make sure there's an extra empty TRB available */
+	for (i = 0; i <= num_trbs; ++i) {
+		if (enq == ring->dequeue)
+			return 0;
+		enq++;
+		while (last_trb(xhci, ring, enq_seg, enq)) {
+			enq_seg = enq_seg->next;
+			enq = enq_seg->trbs;
+		}
+	}
+	return 1;
+}
+
+void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
+{
+	u32 temp;
+	dma_addr_t deq;
+
+	deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
+			xhci->event_ring->dequeue);
+	if (deq == 0 && !in_interrupt())
+		xhci_warn(xhci, "WARN something wrong with SW event ring "
+				"dequeue ptr.\n");
+	/* Update HC event ring dequeue pointer */
+	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+	temp &= ERST_PTR_MASK;
+	if (!in_interrupt())
+		xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
+	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+	xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
+			&xhci->ir_set->erst_dequeue[0]);
+}
+
+/* Ring the host controller doorbell after placing a command on the ring */
+void xhci_ring_cmd_db(struct xhci_hcd *xhci)
+{
+	u32 temp;
+
+	xhci_dbg(xhci, "// Ding dong!\n");
+	temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK;
+	xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]);
+	/* Flush PCI posted writes */
+	xhci_readl(xhci, &xhci->dba->doorbell[0]);
+}
+
+static void ring_ep_doorbell(struct xhci_hcd *xhci,
+		unsigned int slot_id,
+		unsigned int ep_index)
+{
+	struct xhci_ring *ep_ring;
+	u32 field;
+	__u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
+
+	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+	/* Don't ring the doorbell for this endpoint if there are pending
+	 * cancellations because the we don't want to interrupt processing.
+	 */
+	if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+		field = xhci_readl(xhci, db_addr) & DB_MASK;
+		xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
+		/* Flush PCI posted writes - FIXME Matthew Wilcox says this
+		 * isn't time-critical and we shouldn't make the CPU wait for
+		 * the flush.
+		 */
+		xhci_readl(xhci, db_addr);
+	}
+}
+
+/*
+ * Find the segment that trb is in.  Start searching in start_seg.
+ * If we must move past a segment that has a link TRB with a toggle cycle state
+ * bit set, then we will toggle the value pointed at by cycle_state.
+ */
+static struct xhci_segment *find_trb_seg(
+		struct xhci_segment *start_seg,
+		union xhci_trb	*trb, int *cycle_state)
+{
+	struct xhci_segment *cur_seg = start_seg;
+	struct xhci_generic_trb *generic_trb;
+
+	while (cur_seg->trbs > trb ||
+			&cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
+		generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
+		if (TRB_TYPE(generic_trb->field[3]) == TRB_LINK &&
+				(generic_trb->field[3] & LINK_TOGGLE))
+			*cycle_state = ~(*cycle_state) & 0x1;
+		cur_seg = cur_seg->next;
+		if (cur_seg == start_seg)
+			/* Looped over the entire list.  Oops! */
+			return 0;
+	}
+	return cur_seg;
+}
+
+struct dequeue_state {
+	struct xhci_segment *new_deq_seg;
+	union xhci_trb *new_deq_ptr;
+	int new_cycle_state;
+};
+
+/*
+ * Move the xHC's endpoint ring dequeue pointer past cur_td.
+ * Record the new state of the xHC's endpoint ring dequeue segment,
+ * dequeue pointer, and new consumer cycle state in state.
+ * Update our internal representation of the ring's dequeue pointer.
+ *
+ * We do this in three jumps:
+ *  - First we update our new ring state to be the same as when the xHC stopped.
+ *  - Then we traverse the ring to find the segment that contains
+ *    the last TRB in the TD.  We toggle the xHC's new cycle state when we pass
+ *    any link TRBs with the toggle cycle bit set.
+ *  - Finally we move the dequeue state one TRB further, toggling the cycle bit
+ *    if we've moved it past a link TRB with the toggle cycle bit set.
+ */
+static void find_new_dequeue_state(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_td *cur_td, struct dequeue_state *state)
+{
+	struct xhci_virt_device *dev = xhci->devs[slot_id];
+	struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
+	struct xhci_generic_trb *trb;
+
+	state->new_cycle_state = 0;
+	state->new_deq_seg = find_trb_seg(cur_td->start_seg,
+			ep_ring->stopped_trb,
+			&state->new_cycle_state);
+	if (!state->new_deq_seg)
+		BUG();
+	/* Dig out the cycle state saved by the xHC during the stop ep cmd */
+	state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+
+	state->new_deq_ptr = cur_td->last_trb;
+	state->new_deq_seg = find_trb_seg(state->new_deq_seg,
+			state->new_deq_ptr,
+			&state->new_cycle_state);
+	if (!state->new_deq_seg)
+		BUG();
+
+	trb = &state->new_deq_ptr->generic;
+	if (TRB_TYPE(trb->field[3]) == TRB_LINK &&
+				(trb->field[3] & LINK_TOGGLE))
+		state->new_cycle_state = ~(state->new_cycle_state) & 0x1;
+	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
+
+	/* Don't update the ring cycle state for the producer (us). */
+	ep_ring->dequeue = state->new_deq_ptr;
+	ep_ring->deq_seg = state->new_deq_seg;
+}
+
+static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+		struct xhci_td *cur_td)
+{
+	struct xhci_segment *cur_seg;
+	union xhci_trb *cur_trb;
+
+	for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb;
+			true;
+			next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+		if ((cur_trb->generic.field[3] & TRB_TYPE_BITMASK) ==
+				TRB_TYPE(TRB_LINK)) {
+			/* Unchain any chained Link TRBs, but
+			 * leave the pointers intact.
+			 */
+			cur_trb->generic.field[3] &= ~TRB_CHAIN;
+			xhci_dbg(xhci, "Cancel (unchain) link TRB\n");
+			xhci_dbg(xhci, "Address = %p (0x%llx dma); "
+					"in seg %p (0x%llx dma)\n",
+					cur_trb,
+					(unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
+					cur_seg,
+					(unsigned long long)cur_seg->dma);
+		} else {
+			cur_trb->generic.field[0] = 0;
+			cur_trb->generic.field[1] = 0;
+			cur_trb->generic.field[2] = 0;
+			/* Preserve only the cycle bit of this TRB */
+			cur_trb->generic.field[3] &= TRB_CYCLE;
+			cur_trb->generic.field[3] |= TRB_TYPE(TRB_TR_NOOP);
+			xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) "
+					"in seg %p (0x%llx dma)\n",
+					cur_trb,
+					(unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
+					cur_seg,
+					(unsigned long long)cur_seg->dma);
+		}
+		if (cur_trb == cur_td->last_trb)
+			break;
+	}
+}
+
+static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index, struct xhci_segment *deq_seg,
+		union xhci_trb *deq_ptr, u32 cycle_state);
+
+/*
+ * When we get a command completion for a Stop Endpoint Command, we need to
+ * unlink any cancelled TDs from the ring.  There are two ways to do that:
+ *
+ *  1. If the HW was in the middle of processing the TD that needs to be
+ *     cancelled, then we must move the ring's dequeue pointer past the last TRB
+ *     in the TD with a Set Dequeue Pointer Command.
+ *  2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
+ *     bit cleared) so that the HW will skip over them.
+ */
+static void handle_stopped_endpoint(struct xhci_hcd *xhci,
+		union xhci_trb *trb)
+{
+	unsigned int slot_id;
+	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
+	struct list_head *entry;
+	struct xhci_td *cur_td = 0;
+	struct xhci_td *last_unlinked_td;
+
+	struct dequeue_state deq_state;
+#ifdef CONFIG_USB_HCD_STAT
+	ktime_t stop_time = ktime_get();
+#endif
+
+	memset(&deq_state, 0, sizeof(deq_state));
+	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+	if (list_empty(&ep_ring->cancelled_td_list))
+		return;
+
+	/* Fix up the ep ring first, so HW stops executing cancelled TDs.
+	 * We have the xHCI lock, so nothing can modify this list until we drop
+	 * it.  We're also in the event handler, so we can't get re-interrupted
+	 * if another Stop Endpoint command completes
+	 */
+	list_for_each(entry, &ep_ring->cancelled_td_list) {
+		cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
+		xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n",
+				cur_td->first_trb,
+				(unsigned long long)xhci_trb_virt_to_dma(cur_td->start_seg, cur_td->first_trb));
+		/*
+		 * If we stopped on the TD we need to cancel, then we have to
+		 * move the xHC endpoint ring dequeue pointer past this TD.
+		 */
+		if (cur_td == ep_ring->stopped_td)
+			find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+					&deq_state);
+		else
+			td_to_noop(xhci, ep_ring, cur_td);
+		/*
+		 * The event handler won't see a completion for this TD anymore,
+		 * so remove it from the endpoint ring's TD list.  Keep it in
+		 * the cancelled TD list for URB completion later.
+		 */
+		list_del(&cur_td->td_list);
+		ep_ring->cancels_pending--;
+	}
+	last_unlinked_td = cur_td;
+
+	/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
+	if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
+		xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+				"new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+				deq_state.new_deq_seg,
+				(unsigned long long)deq_state.new_deq_seg->dma,
+				deq_state.new_deq_ptr,
+				(unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
+				deq_state.new_cycle_state);
+		queue_set_tr_deq(xhci, slot_id, ep_index,
+				deq_state.new_deq_seg,
+				deq_state.new_deq_ptr,
+				(u32) deq_state.new_cycle_state);
+		/* Stop the TD queueing code from ringing the doorbell until
+		 * this command completes.  The HC won't set the dequeue pointer
+		 * if the ring is running, and ringing the doorbell starts the
+		 * ring running.
+		 */
+		ep_ring->state |= SET_DEQ_PENDING;
+		xhci_ring_cmd_db(xhci);
+	} else {
+		/* Otherwise just ring the doorbell to restart the ring */
+		ring_ep_doorbell(xhci, slot_id, ep_index);
+	}
+
+	/*
+	 * Drop the lock and complete the URBs in the cancelled TD list.
+	 * New TDs to be cancelled might be added to the end of the list before
+	 * we can complete all the URBs for the TDs we already unlinked.
+	 * So stop when we've completed the URB for the last TD we unlinked.
+	 */
+	do {
+		cur_td = list_entry(ep_ring->cancelled_td_list.next,
+				struct xhci_td, cancelled_td_list);
+		list_del(&cur_td->cancelled_td_list);
+
+		/* Clean up the cancelled URB */
+#ifdef CONFIG_USB_HCD_STAT
+		hcd_stat_update(xhci->tp_stat, cur_td->urb->actual_length,
+				ktime_sub(stop_time, cur_td->start_time));
+#endif
+		cur_td->urb->hcpriv = NULL;
+		usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), cur_td->urb);
+
+		xhci_dbg(xhci, "Giveback cancelled URB %p\n", cur_td->urb);
+		spin_unlock(&xhci->lock);
+		/* Doesn't matter what we pass for status, since the core will
+		 * just overwrite it (because the URB has been unlinked).
+		 */
+		usb_hcd_giveback_urb(xhci_to_hcd(xhci), cur_td->urb, 0);
+		kfree(cur_td);
+
+		spin_lock(&xhci->lock);
+	} while (cur_td != last_unlinked_td);
+
+	/* Return to the event handler with xhci->lock re-acquired */
+}
+
+/*
+ * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
+ * we need to clear the set deq pending flag in the endpoint ring state, so that
+ * the TD queueing code can ring the doorbell again.  We also need to ring the
+ * endpoint doorbell to restart the ring, but only if there aren't more
+ * cancellations pending.
+ */
+static void handle_set_deq_completion(struct xhci_hcd *xhci,
+		struct xhci_event_cmd *event,
+		union xhci_trb *trb)
+{
+	unsigned int slot_id;
+	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
+	struct xhci_virt_device *dev;
+
+	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+	dev = xhci->devs[slot_id];
+	ep_ring = dev->ep_rings[ep_index];
+
+	if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
+		unsigned int ep_state;
+		unsigned int slot_state;
+
+		switch (GET_COMP_CODE(event->status)) {
+		case COMP_TRB_ERR:
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because "
+					"of stream ID configuration\n");
+			break;
+		case COMP_CTX_STATE:
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
+					"to incorrect slot or ep state.\n");
+			ep_state = dev->out_ctx->ep[ep_index].ep_info;
+			ep_state &= EP_STATE_MASK;
+			slot_state = dev->out_ctx->slot.dev_state;
+			slot_state = GET_SLOT_STATE(slot_state);
+			xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
+					slot_state, ep_state);
+			break;
+		case COMP_EBADSLT:
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because "
+					"slot %u was not enabled.\n", slot_id);
+			break;
+		default:
+			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown "
+					"completion code of %u.\n",
+					GET_COMP_CODE(event->status));
+			break;
+		}
+		/* OK what do we do now?  The endpoint state is hosed, and we
+		 * should never get to this point if the synchronization between
+		 * queueing, and endpoint state are correct.  This might happen
+		 * if the device gets disconnected after we've finished
+		 * cancelling URBs, which might not be an error...
+		 */
+	} else {
+		xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
+				"deq[1] = 0x%x.\n",
+				dev->out_ctx->ep[ep_index].deq[0],
+				dev->out_ctx->ep[ep_index].deq[1]);
+	}
+
+	ep_ring->state &= ~SET_DEQ_PENDING;
+	ring_ep_doorbell(xhci, slot_id, ep_index);
+}
+
+
+static void handle_cmd_completion(struct xhci_hcd *xhci,
+		struct xhci_event_cmd *event)
+{
+	int slot_id = TRB_TO_SLOT_ID(event->flags);
+	u64 cmd_dma;
+	dma_addr_t cmd_dequeue_dma;
+
+	cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+	cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+			xhci->cmd_ring->dequeue);
+	/* Is the command ring deq ptr out of sync with the deq seg ptr? */
+	if (cmd_dequeue_dma == 0) {
+		xhci->error_bitmask |= 1 << 4;
+		return;
+	}
+	/* Does the DMA address match our internal dequeue pointer address? */
+	if (cmd_dma != (u64) cmd_dequeue_dma) {
+		xhci->error_bitmask |= 1 << 5;
+		return;
+	}
+	switch (xhci->cmd_ring->dequeue->generic.field[3] & TRB_TYPE_BITMASK) {
+	case TRB_TYPE(TRB_ENABLE_SLOT):
+		if (GET_COMP_CODE(event->status) == COMP_SUCCESS)
+			xhci->slot_id = slot_id;
+		else
+			xhci->slot_id = 0;
+		complete(&xhci->addr_dev);
+		break;
+	case TRB_TYPE(TRB_DISABLE_SLOT):
+		if (xhci->devs[slot_id])
+			xhci_free_virt_device(xhci, slot_id);
+		break;
+	case TRB_TYPE(TRB_CONFIG_EP):
+		xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
+		complete(&xhci->devs[slot_id]->cmd_completion);
+		break;
+	case TRB_TYPE(TRB_ADDR_DEV):
+		xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
+		complete(&xhci->addr_dev);
+		break;
+	case TRB_TYPE(TRB_STOP_RING):
+		handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue);
+		break;
+	case TRB_TYPE(TRB_SET_DEQ):
+		handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue);
+		break;
+	case TRB_TYPE(TRB_CMD_NOOP):
+		++xhci->noops_handled;
+		break;
+	default:
+		/* Skip over unknown commands on the event ring */
+		xhci->error_bitmask |= 1 << 6;
+		break;
+	}
+	inc_deq(xhci, xhci->cmd_ring, false);
+}
+
+static void handle_port_status(struct xhci_hcd *xhci,
+		union xhci_trb *event)
+{
+	u32 port_id;
+
+	/* Port status change events always have a successful completion code */
+	if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) {
+		xhci_warn(xhci, "WARN: xHC returned failed port status event\n");
+		xhci->error_bitmask |= 1 << 8;
+	}
+	/* FIXME: core doesn't care about all port link state changes yet */
+	port_id = GET_PORT_ID(event->generic.field[0]);
+	xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
+
+	/* Update event ring dequeue pointer before dropping the lock */
+	inc_deq(xhci, xhci->event_ring, true);
+	xhci_set_hc_event_deq(xhci);
+
+	spin_unlock(&xhci->lock);
+	/* Pass this up to the core */
+	usb_hcd_poll_rh_status(xhci_to_hcd(xhci));
+	spin_lock(&xhci->lock);
+}
+
+/*
+ * This TD is defined by the TRBs starting at start_trb in start_seg and ending
+ * at end_trb, which may be in another segment.  If the suspect DMA address is a
+ * TRB in this TD, this function returns that TRB's segment.  Otherwise it
+ * returns 0.
+ */
+static struct xhci_segment *trb_in_td(
+		struct xhci_segment *start_seg,
+		union xhci_trb	*start_trb,
+		union xhci_trb	*end_trb,
+		dma_addr_t	suspect_dma)
+{
+	dma_addr_t start_dma;
+	dma_addr_t end_seg_dma;
+	dma_addr_t end_trb_dma;
+	struct xhci_segment *cur_seg;
+
+	start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
+	cur_seg = start_seg;
+
+	do {
+		/* We may get an event for a Link TRB in the middle of a TD */
+		end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
+				&start_seg->trbs[TRBS_PER_SEGMENT - 1]);
+		/* If the end TRB isn't in this segment, this is set to 0 */
+		end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
+
+		if (end_trb_dma > 0) {
+			/* The end TRB is in this segment, so suspect should be here */
+			if (start_dma <= end_trb_dma) {
+				if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
+					return cur_seg;
+			} else {
+				/* Case for one segment with
+				 * a TD wrapped around to the top
+				 */
+				if ((suspect_dma >= start_dma &&
+							suspect_dma <= end_seg_dma) ||
+						(suspect_dma >= cur_seg->dma &&
+						 suspect_dma <= end_trb_dma))
+					return cur_seg;
+			}
+			return 0;
+		} else {
+			/* Might still be somewhere in this segment */
+			if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
+				return cur_seg;
+		}
+		cur_seg = cur_seg->next;
+		start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
+	} while (1);
+
+}
+
+/*
+ * If this function returns an error condition, it means it got a Transfer
+ * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
+ * At this point, the host controller is probably hosed and should be reset.
+ */
+static int handle_tx_event(struct xhci_hcd *xhci,
+		struct xhci_transfer_event *event)
+{
+	struct xhci_virt_device *xdev;
+	struct xhci_ring *ep_ring;
+	int ep_index;
+	struct xhci_td *td = 0;
+	dma_addr_t event_dma;
+	struct xhci_segment *event_seg;
+	union xhci_trb *event_trb;
+	struct urb *urb = 0;
+	int status = -EINPROGRESS;
+
+	xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
+	if (!xdev) {
+		xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
+		return -ENODEV;
+	}
+
+	/* Endpoint ID is 1 based, our index is zero based */
+	ep_index = TRB_TO_EP_ID(event->flags) - 1;
+	ep_ring = xdev->ep_rings[ep_index];
+	if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+		xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
+		return -ENODEV;
+	}
+
+	event_dma = event->buffer[0];
+	if (event->buffer[1] != 0)
+		xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
+
+	/* This TRB should be in the TD at the head of this ring's TD list */
+	if (list_empty(&ep_ring->td_list)) {
+		xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
+				TRB_TO_SLOT_ID(event->flags), ep_index);
+		xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+				(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+		xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+		urb = NULL;
+		goto cleanup;
+	}
+	td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+
+	/* Is this a TRB in the currently executing TD? */
+	event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
+			td->last_trb, event_dma);
+	if (!event_seg) {
+		/* HC is busted, give up! */
+		xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
+		return -ESHUTDOWN;
+	}
+	event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
+	xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+			(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
+	xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
+			(unsigned int) event->buffer[0]);
+	xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
+			(unsigned int) event->buffer[1]);
+	xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
+			(unsigned int) event->transfer_len);
+	xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
+			(unsigned int) event->flags);
+
+	/* Look for common error cases */
+	switch (GET_COMP_CODE(event->transfer_len)) {
+	/* Skip codes that require special handling depending on
+	 * transfer type
+	 */
+	case COMP_SUCCESS:
+	case COMP_SHORT_TX:
+		break;
+	case COMP_STOP:
+		xhci_dbg(xhci, "Stopped on Transfer TRB\n");
+		break;
+	case COMP_STOP_INVAL:
+		xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
+		break;
+	case COMP_STALL:
+		xhci_warn(xhci, "WARN: Stalled endpoint\n");
+		status = -EPIPE;
+		break;
+	case COMP_TRB_ERR:
+		xhci_warn(xhci, "WARN: TRB error on endpoint\n");
+		status = -EILSEQ;
+		break;
+	case COMP_TX_ERR:
+		xhci_warn(xhci, "WARN: transfer error on endpoint\n");
+		status = -EPROTO;
+		break;
+	case COMP_DB_ERR:
+		xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
+		status = -ENOSR;
+		break;
+	default:
+		xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n");
+		urb = NULL;
+		goto cleanup;
+	}
+	/* Now update the urb's actual_length and give back to the core */
+	/* Was this a control transfer? */
+	if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
+		xhci_debug_trb(xhci, xhci->event_ring->dequeue);
+		switch (GET_COMP_CODE(event->transfer_len)) {
+		case COMP_SUCCESS:
+			if (event_trb == ep_ring->dequeue) {
+				xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
+				status = -ESHUTDOWN;
+			} else if (event_trb != td->last_trb) {
+				xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n");
+				status = -ESHUTDOWN;
+			} else {
+				xhci_dbg(xhci, "Successful control transfer!\n");
+				status = 0;
+			}
+			break;
+		case COMP_SHORT_TX:
+			xhci_warn(xhci, "WARN: short transfer on control ep\n");
+			status = -EREMOTEIO;
+			break;
+		default:
+			/* Others already handled above */
+			break;
+		}
+		/*
+		 * Did we transfer any data, despite the errors that might have
+		 * happened?  I.e. did we get past the setup stage?
+		 */
+		if (event_trb != ep_ring->dequeue) {
+			/* The event was for the status stage */
+			if (event_trb == td->last_trb) {
+				td->urb->actual_length =
+					td->urb->transfer_buffer_length;
+			} else {
+			/* Maybe the event was for the data stage? */
+				if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+					/* We didn't stop on a link TRB in the middle */
+					td->urb->actual_length =
+						td->urb->transfer_buffer_length -
+						TRB_LEN(event->transfer_len);
+			}
+		}
+	} else {
+		switch (GET_COMP_CODE(event->transfer_len)) {
+		case COMP_SUCCESS:
+			/* Double check that the HW transferred everything. */
+			if (event_trb != td->last_trb) {
+				xhci_warn(xhci, "WARN Successful completion "
+						"on short TX\n");
+				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+					status = -EREMOTEIO;
+				else
+					status = 0;
+			} else {
+				xhci_dbg(xhci, "Successful bulk transfer!\n");
+				status = 0;
+			}
+			break;
+		case COMP_SHORT_TX:
+			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+				status = -EREMOTEIO;
+			else
+				status = 0;
+			break;
+		default:
+			/* Others already handled above */
+			break;
+		}
+		dev_dbg(&td->urb->dev->dev,
+				"ep %#x - asked for %d bytes, "
+				"%d bytes untransferred\n",
+				td->urb->ep->desc.bEndpointAddress,
+				td->urb->transfer_buffer_length,
+				TRB_LEN(event->transfer_len));
+		/* Fast path - was this the last TRB in the TD for this URB? */
+		if (event_trb == td->last_trb) {
+			if (TRB_LEN(event->transfer_len) != 0) {
+				td->urb->actual_length =
+					td->urb->transfer_buffer_length -
+					TRB_LEN(event->transfer_len);
+				if (td->urb->actual_length < 0) {
+					xhci_warn(xhci, "HC gave bad length "
+							"of %d bytes left\n",
+							TRB_LEN(event->transfer_len));
+					td->urb->actual_length = 0;
+				}
+				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+					status = -EREMOTEIO;
+				else
+					status = 0;
+			} else {
+				td->urb->actual_length = td->urb->transfer_buffer_length;
+				/* Ignore a short packet completion if the
+				 * untransferred length was zero.
+				 */
+				status = 0;
+			}
+		} else {
+			/* Slow path - walk the list, starting from the dequeue
+			 * pointer, to get the actual length transferred.
+			 */
+			union xhci_trb *cur_trb;
+			struct xhci_segment *cur_seg;
+
+			td->urb->actual_length = 0;
+			for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
+					cur_trb != event_trb;
+					next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
+				if (TRB_TYPE(cur_trb->generic.field[3]) != TRB_TR_NOOP &&
+						TRB_TYPE(cur_trb->generic.field[3]) != TRB_LINK)
+					td->urb->actual_length +=
+						TRB_LEN(cur_trb->generic.field[2]);
+			}
+			/* If the ring didn't stop on a Link or No-op TRB, add
+			 * in the actual bytes transferred from the Normal TRB
+			 */
+			if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+				td->urb->actual_length +=
+					TRB_LEN(cur_trb->generic.field[2]) -
+					TRB_LEN(event->transfer_len);
+		}
+	}
+	/* The Endpoint Stop Command completion will take care of
+	 * any stopped TDs.  A stopped TD may be restarted, so don't update the
+	 * ring dequeue pointer or take this TD off any lists yet.
+	 */
+	if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
+			GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+		ep_ring->stopped_td = td;
+		ep_ring->stopped_trb = event_trb;
+	} else {
+		/* Update ring dequeue pointer */
+		while (ep_ring->dequeue != td->last_trb)
+			inc_deq(xhci, ep_ring, false);
+		inc_deq(xhci, ep_ring, false);
+
+		/* Clean up the endpoint's TD list */
+		urb = td->urb;
+		list_del(&td->td_list);
+		/* Was this TD slated to be cancelled but completed anyway? */
+		if (!list_empty(&td->cancelled_td_list)) {
+			list_del(&td->cancelled_td_list);
+			ep_ring->cancels_pending--;
+		}
+		kfree(td);
+		urb->hcpriv = NULL;
+	}
+cleanup:
+	inc_deq(xhci, xhci->event_ring, true);
+	xhci_set_hc_event_deq(xhci);
+
+	/* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
+	if (urb) {
+		usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+		spin_unlock(&xhci->lock);
+		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
+		spin_lock(&xhci->lock);
+	}
+	return 0;
+}
+
+/*
+ * This function handles all OS-owned events on the event ring.  It may drop
+ * xhci->lock between event processing (e.g. to pass up port status changes).
+ */
+void xhci_handle_event(struct xhci_hcd *xhci)
+{
+	union xhci_trb *event;
+	int update_ptrs = 1;
+	int ret;
+
+	if (!xhci->event_ring || !xhci->event_ring->dequeue) {
+		xhci->error_bitmask |= 1 << 1;
+		return;
+	}
+
+	event = xhci->event_ring->dequeue;
+	/* Does the HC or OS own the TRB? */
+	if ((event->event_cmd.flags & TRB_CYCLE) !=
+			xhci->event_ring->cycle_state) {
+		xhci->error_bitmask |= 1 << 2;
+		return;
+	}
+
+	/* FIXME: Handle more event types. */
+	switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
+	case TRB_TYPE(TRB_COMPLETION):
+		handle_cmd_completion(xhci, &event->event_cmd);
+		break;
+	case TRB_TYPE(TRB_PORT_STATUS):
+		handle_port_status(xhci, event);
+		update_ptrs = 0;
+		break;
+	case TRB_TYPE(TRB_TRANSFER):
+		ret = handle_tx_event(xhci, &event->trans_event);
+		if (ret < 0)
+			xhci->error_bitmask |= 1 << 9;
+		else
+			update_ptrs = 0;
+		break;
+	default:
+		xhci->error_bitmask |= 1 << 3;
+	}
+
+	if (update_ptrs) {
+		/* Update SW and HC event ring dequeue pointer */
+		inc_deq(xhci, xhci->event_ring, true);
+		xhci_set_hc_event_deq(xhci);
+	}
+	/* Are there more items on the event ring? */
+	xhci_handle_event(xhci);
+}
+
+/****		Endpoint Ring Operations	****/
+
+/*
+ * Generic function for queueing a TRB on a ring.
+ * The caller must have checked to make sure there's room on the ring.
+ */
+static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+		bool consumer,
+		u32 field1, u32 field2, u32 field3, u32 field4)
+{
+	struct xhci_generic_trb *trb;
+
+	trb = &ring->enqueue->generic;
+	trb->field[0] = field1;
+	trb->field[1] = field2;
+	trb->field[2] = field3;
+	trb->field[3] = field4;
+	inc_enq(xhci, ring, consumer);
+}
+
+/*
+ * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
+ * FIXME allocate segments if the ring is full.
+ */
+static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+		u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
+{
+	/* Make sure the endpoint has been added to xHC schedule */
+	xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state);
+	switch (ep_state) {
+	case EP_STATE_DISABLED:
+		/*
+		 * USB core changed config/interfaces without notifying us,
+		 * or hardware is reporting the wrong state.
+		 */
+		xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
+		return -ENOENT;
+	case EP_STATE_HALTED:
+	case EP_STATE_ERROR:
+		xhci_warn(xhci, "WARN waiting for halt or error on ep "
+				"to be cleared\n");
+		/* FIXME event handling code for error needs to clear it */
+		/* XXX not sure if this should be -ENOENT or not */
+		return -EINVAL;
+	case EP_STATE_STOPPED:
+	case EP_STATE_RUNNING:
+		break;
+	default:
+		xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
+		/*
+		 * FIXME issue Configure Endpoint command to try to get the HC
+		 * back into a known state.
+		 */
+		return -EINVAL;
+	}
+	if (!room_on_ring(xhci, ep_ring, num_trbs)) {
+		/* FIXME allocate more room */
+		xhci_err(xhci, "ERROR no room on ep ring\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int prepare_transfer(struct xhci_hcd *xhci,
+		struct xhci_virt_device *xdev,
+		unsigned int ep_index,
+		unsigned int num_trbs,
+		struct urb *urb,
+		struct xhci_td **td,
+		gfp_t mem_flags)
+{
+	int ret;
+
+	ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
+			xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+			num_trbs, mem_flags);
+	if (ret)
+		return ret;
+	*td = kzalloc(sizeof(struct xhci_td), mem_flags);
+	if (!*td)
+		return -ENOMEM;
+	INIT_LIST_HEAD(&(*td)->td_list);
+	INIT_LIST_HEAD(&(*td)->cancelled_td_list);
+
+	ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb);
+	if (unlikely(ret)) {
+		kfree(*td);
+		return ret;
+	}
+
+	(*td)->urb = urb;
+	urb->hcpriv = (void *) (*td);
+	/* Add this TD to the tail of the endpoint ring's TD list */
+	list_add_tail(&(*td)->td_list, &xdev->ep_rings[ep_index]->td_list);
+	(*td)->start_seg = xdev->ep_rings[ep_index]->enq_seg;
+	(*td)->first_trb = xdev->ep_rings[ep_index]->enqueue;
+
+	return 0;
+}
+
+static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
+{
+	int num_sgs, num_trbs, running_total, temp, i;
+	struct scatterlist *sg;
+
+	sg = NULL;
+	num_sgs = urb->num_sgs;
+	temp = urb->transfer_buffer_length;
+
+	xhci_dbg(xhci, "count sg list trbs: \n");
+	num_trbs = 0;
+	for_each_sg(urb->sg->sg, sg, num_sgs, i) {
+		unsigned int previous_total_trbs = num_trbs;
+		unsigned int len = sg_dma_len(sg);
+
+		/* Scatter gather list entries may cross 64KB boundaries */
+		running_total = TRB_MAX_BUFF_SIZE -
+			(sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+		if (running_total != 0)
+			num_trbs++;
+
+		/* How many more 64KB chunks to transfer, how many more TRBs? */
+		while (running_total < sg_dma_len(sg)) {
+			num_trbs++;
+			running_total += TRB_MAX_BUFF_SIZE;
+		}
+		xhci_dbg(xhci, " sg #%d: dma = %#llx, len = %#x (%d), num_trbs = %d\n",
+				i, (unsigned long long)sg_dma_address(sg),
+				len, len, num_trbs - previous_total_trbs);
+
+		len = min_t(int, len, temp);
+		temp -= len;
+		if (temp == 0)
+			break;
+	}
+	xhci_dbg(xhci, "\n");
+	if (!in_interrupt())
+		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n",
+				urb->ep->desc.bEndpointAddress,
+				urb->transfer_buffer_length,
+				num_trbs);
+	return num_trbs;
+}
+
+static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
+{
+	if (num_trbs != 0)
+		dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
+				"TRBs, %d left\n", __func__,
+				urb->ep->desc.bEndpointAddress, num_trbs);
+	if (running_total != urb->transfer_buffer_length)
+		dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
+				"queued %#x (%d), asked for %#x (%d)\n",
+				__func__,
+				urb->ep->desc.bEndpointAddress,
+				running_total, running_total,
+				urb->transfer_buffer_length,
+				urb->transfer_buffer_length);
+}
+
+static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index, int start_cycle,
+		struct xhci_generic_trb *start_trb, struct xhci_td *td)
+{
+	/*
+	 * Pass all the TRBs to the hardware at once and make sure this write
+	 * isn't reordered.
+	 */
+	wmb();
+	start_trb->field[3] |= start_cycle;
+	ring_ep_doorbell(xhci, slot_id, ep_index);
+}
+
+static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ring *ep_ring;
+	unsigned int num_trbs;
+	struct xhci_td *td;
+	struct scatterlist *sg;
+	int num_sgs;
+	int trb_buff_len, this_sg_len, running_total;
+	bool first_trb;
+	u64 addr;
+
+	struct xhci_generic_trb *start_trb;
+	int start_cycle;
+
+	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+	num_trbs = count_sg_trbs_needed(xhci, urb);
+	num_sgs = urb->num_sgs;
+
+	trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
+			ep_index, num_trbs, urb, &td, mem_flags);
+	if (trb_buff_len < 0)
+		return trb_buff_len;
+	/*
+	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
+	 * until we've finished creating all the other TRBs.  The ring's cycle
+	 * state may change as we enqueue the other TRBs, so save it too.
+	 */
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+
+	running_total = 0;
+	/*
+	 * How much data is in the first TRB?
+	 *
+	 * There are three forces at work for TRB buffer pointers and lengths:
+	 * 1. We don't want to walk off the end of this sg-list entry buffer.
+	 * 2. The transfer length that the driver requested may be smaller than
+	 *    the amount of memory allocated for this scatter-gather list.
+	 * 3. TRBs buffers can't cross 64KB boundaries.
+	 */
+	sg = urb->sg->sg;
+	addr = (u64) sg_dma_address(sg);
+	this_sg_len = sg_dma_len(sg);
+	trb_buff_len = TRB_MAX_BUFF_SIZE -
+		(addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+	trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
+	if (trb_buff_len > urb->transfer_buffer_length)
+		trb_buff_len = urb->transfer_buffer_length;
+	xhci_dbg(xhci, "First length to xfer from 1st sglist entry = %u\n",
+			trb_buff_len);
+
+	first_trb = true;
+	/* Queue the first TRB, even if it's zero-length */
+	do {
+		u32 field = 0;
+
+		/* Don't change the cycle bit of the first TRB until later */
+		if (first_trb)
+			first_trb = false;
+		else
+			field |= ep_ring->cycle_state;
+
+		/* Chain all the TRBs together; clear the chain bit in the last
+		 * TRB to indicate it's the last TRB in the chain.
+		 */
+		if (num_trbs > 1) {
+			field |= TRB_CHAIN;
+		} else {
+			/* FIXME - add check for ZERO_PACKET flag before this */
+			td->last_trb = ep_ring->enqueue;
+			field |= TRB_IOC;
+		}
+		xhci_dbg(xhci, " sg entry: dma = %#x, len = %#x (%d), "
+				"64KB boundary at %#x, end dma = %#x\n",
+				(unsigned int) addr, trb_buff_len, trb_buff_len,
+				(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
+				(unsigned int) addr + trb_buff_len);
+		if (TRB_MAX_BUFF_SIZE -
+				(addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) {
+			xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
+			xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
+					(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
+					(unsigned int) addr + trb_buff_len);
+		}
+		queue_trb(xhci, ep_ring, false,
+				(u32) addr,
+				(u32) ((u64) addr >> 32),
+				TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+				/* We always want to know if the TRB was short,
+				 * or we won't get an event when it completes.
+				 * (Unless we use event data TRBs, which are a
+				 * waste of space and HC resources.)
+				 */
+				field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
+		--num_trbs;
+		running_total += trb_buff_len;
+
+		/* Calculate length for next transfer --
+		 * Are we done queueing all the TRBs for this sg entry?
+		 */
+		this_sg_len -= trb_buff_len;
+		if (this_sg_len == 0) {
+			--num_sgs;
+			if (num_sgs == 0)
+				break;
+			sg = sg_next(sg);
+			addr = (u64) sg_dma_address(sg);
+			this_sg_len = sg_dma_len(sg);
+		} else {
+			addr += trb_buff_len;
+		}
+
+		trb_buff_len = TRB_MAX_BUFF_SIZE -
+			(addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+		trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
+		if (running_total + trb_buff_len > urb->transfer_buffer_length)
+			trb_buff_len =
+				urb->transfer_buffer_length - running_total;
+	} while (running_total < urb->transfer_buffer_length);
+
+	check_trb_math(urb, num_trbs, running_total);
+	giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+	return 0;
+}
+
+/* This is very similar to what ehci-q.c qtd_fill() does */
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ring *ep_ring;
+	struct xhci_td *td;
+	int num_trbs;
+	struct xhci_generic_trb *start_trb;
+	bool first_trb;
+	int start_cycle;
+	u32 field;
+
+	int running_total, trb_buff_len, ret;
+	u64 addr;
+
+	if (urb->sg)
+		return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
+
+	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+	num_trbs = 0;
+	/* How much data is (potentially) left before the 64KB boundary? */
+	running_total = TRB_MAX_BUFF_SIZE -
+		(urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+
+	/* If there's some data on this 64KB chunk, or we have to send a
+	 * zero-length transfer, we need at least one TRB
+	 */
+	if (running_total != 0 || urb->transfer_buffer_length == 0)
+		num_trbs++;
+	/* How many more 64KB chunks to transfer, how many more TRBs? */
+	while (running_total < urb->transfer_buffer_length) {
+		num_trbs++;
+		running_total += TRB_MAX_BUFF_SIZE;
+	}
+	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
+
+	if (!in_interrupt())
+		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n",
+				urb->ep->desc.bEndpointAddress,
+				urb->transfer_buffer_length,
+				urb->transfer_buffer_length,
+				(unsigned long long)urb->transfer_dma,
+				num_trbs);
+
+	ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+			num_trbs, urb, &td, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
+	 * until we've finished creating all the other TRBs.  The ring's cycle
+	 * state may change as we enqueue the other TRBs, so save it too.
+	 */
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+
+	running_total = 0;
+	/* How much data is in the first TRB? */
+	addr = (u64) urb->transfer_dma;
+	trb_buff_len = TRB_MAX_BUFF_SIZE -
+		(urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+	if (urb->transfer_buffer_length < trb_buff_len)
+		trb_buff_len = urb->transfer_buffer_length;
+
+	first_trb = true;
+
+	/* Queue the first TRB, even if it's zero-length */
+	do {
+		field = 0;
+
+		/* Don't change the cycle bit of the first TRB until later */
+		if (first_trb)
+			first_trb = false;
+		else
+			field |= ep_ring->cycle_state;
+
+		/* Chain all the TRBs together; clear the chain bit in the last
+		 * TRB to indicate it's the last TRB in the chain.
+		 */
+		if (num_trbs > 1) {
+			field |= TRB_CHAIN;
+		} else {
+			/* FIXME - add check for ZERO_PACKET flag before this */
+			td->last_trb = ep_ring->enqueue;
+			field |= TRB_IOC;
+		}
+		queue_trb(xhci, ep_ring, false,
+				(u32) addr,
+				(u32) ((u64) addr >> 32),
+				TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+				/* We always want to know if the TRB was short,
+				 * or we won't get an event when it completes.
+				 * (Unless we use event data TRBs, which are a
+				 * waste of space and HC resources.)
+				 */
+				field | TRB_ISP | TRB_TYPE(TRB_NORMAL));
+		--num_trbs;
+		running_total += trb_buff_len;
+
+		/* Calculate length for next transfer */
+		addr += trb_buff_len;
+		trb_buff_len = urb->transfer_buffer_length - running_total;
+		if (trb_buff_len > TRB_MAX_BUFF_SIZE)
+			trb_buff_len = TRB_MAX_BUFF_SIZE;
+	} while (running_total < urb->transfer_buffer_length);
+
+	check_trb_math(urb, num_trbs, running_total);
+	giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+	return 0;
+}
+
+/* Caller must have locked xhci->lock */
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+		struct urb *urb, int slot_id, unsigned int ep_index)
+{
+	struct xhci_ring *ep_ring;
+	int num_trbs;
+	int ret;
+	struct usb_ctrlrequest *setup;
+	struct xhci_generic_trb *start_trb;
+	int start_cycle;
+	u32 field;
+	struct xhci_td *td;
+
+	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+
+	/*
+	 * Need to copy setup packet into setup TRB, so we can't use the setup
+	 * DMA address.
+	 */
+	if (!urb->setup_packet)
+		return -EINVAL;
+
+	if (!in_interrupt())
+		xhci_dbg(xhci, "Queueing ctrl tx for slot id %d, ep %d\n",
+				slot_id, ep_index);
+	/* 1 TRB for setup, 1 for status */
+	num_trbs = 2;
+	/*
+	 * Don't need to check if we need additional event data and normal TRBs,
+	 * since data in control transfers will never get bigger than 16MB
+	 * XXX: can we get a buffer that crosses 64KB boundaries?
+	 */
+	if (urb->transfer_buffer_length > 0)
+		num_trbs++;
+	ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, num_trbs,
+			urb, &td, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Don't give the first TRB to the hardware (by toggling the cycle bit)
+	 * until we've finished creating all the other TRBs.  The ring's cycle
+	 * state may change as we enqueue the other TRBs, so save it too.
+	 */
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+
+	/* Queue setup TRB - see section 6.4.1.2.1 */
+	/* FIXME better way to translate setup_packet into two u32 fields? */
+	setup = (struct usb_ctrlrequest *) urb->setup_packet;
+	queue_trb(xhci, ep_ring, false,
+			/* FIXME endianness is probably going to bite my ass here. */
+			setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
+			setup->wIndex | setup->wLength << 16,
+			TRB_LEN(8) | TRB_INTR_TARGET(0),
+			/* Immediate data in pointer */
+			TRB_IDT | TRB_TYPE(TRB_SETUP));
+
+	/* If there's data, queue data TRBs */
+	field = 0;
+	if (urb->transfer_buffer_length > 0) {
+		if (setup->bRequestType & USB_DIR_IN)
+			field |= TRB_DIR_IN;
+		queue_trb(xhci, ep_ring, false,
+				lower_32_bits(urb->transfer_dma),
+				upper_32_bits(urb->transfer_dma),
+				TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+				/* Event on short tx */
+				field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
+	}
+
+	/* Save the DMA address of the last TRB in the TD */
+	td->last_trb = ep_ring->enqueue;
+
+	/* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
+	/* If the device sent data, the status stage is an OUT transfer */
+	if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
+		field = 0;
+	else
+		field = TRB_DIR_IN;
+	queue_trb(xhci, ep_ring, false,
+			0,
+			0,
+			TRB_INTR_TARGET(0),
+			/* Event on completion */
+			field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
+
+	giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+	return 0;
+}
+
+/****		Command Ring Operations		****/
+
+/* Generic function for queueing a command TRB on the command ring */
+static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4)
+{
+	if (!room_on_ring(xhci, xhci->cmd_ring, 1)) {
+		if (!in_interrupt())
+			xhci_err(xhci, "ERR: No room for command on command ring\n");
+		return -ENOMEM;
+	}
+	queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+			field4 | xhci->cmd_ring->cycle_state);
+	return 0;
+}
+
+/* Queue a no-op command on the command ring */
+static int queue_cmd_noop(struct xhci_hcd *xhci)
+{
+	return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP));
+}
+
+/*
+ * Place a no-op command on the command ring to test the command and
+ * event ring.
+ */
+void *xhci_setup_one_noop(struct xhci_hcd *xhci)
+{
+	if (queue_cmd_noop(xhci) < 0)
+		return NULL;
+	xhci->noops_submitted++;
+	return xhci_ring_cmd_db;
+}
+
+/* Queue a slot enable or disable request on the command ring */
+int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
+{
+	return queue_command(xhci, 0, 0, 0,
+			TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+/* Queue an address device command TRB */
+int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id)
+{
+	return queue_command(xhci, in_ctx_ptr, 0, 0,
+			TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+/* Queue a configure endpoint command TRB */
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id)
+{
+	return queue_command(xhci, in_ctx_ptr, 0, 0,
+			TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
+}
+
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index)
+{
+	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+	u32 type = TRB_TYPE(TRB_STOP_RING);
+
+	return queue_command(xhci, 0, 0, 0,
+			trb_slot_id | trb_ep_index | type);
+}
+
+/* Set Transfer Ring Dequeue Pointer command.
+ * This should not be used for endpoints that have streams enabled.
+ */
+static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index, struct xhci_segment *deq_seg,
+		union xhci_trb *deq_ptr, u32 cycle_state)
+{
+	dma_addr_t addr;
+	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+	u32 type = TRB_TYPE(TRB_SET_DEQ);
+
+	addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
+	if (addr == 0)
+		xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
+		xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
+				deq_seg, deq_ptr);
+	return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+			trb_slot_id | trb_ep_index | type);
+}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
new file mode 100644
index 00000000000..8936eeb5588
--- /dev/null
+++ b/drivers/usb/host/xhci.h
@@ -0,0 +1,1157 @@
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_XHCI_HCD_H
+#define __LINUX_XHCI_HCD_H
+
+#include <linux/usb.h>
+#include <linux/timer.h>
+
+#include "../core/hcd.h"
+/* Code sharing between pci-quirks and xhci hcd */
+#include	"xhci-ext-caps.h"
+
+/* xHCI PCI Configuration Registers */
+#define XHCI_SBRN_OFFSET	(0x60)
+
+/* Max number of USB devices for any host controller - limit in section 6.1 */
+#define MAX_HC_SLOTS		256
+/* Section 5.3.3 - MaxPorts */
+#define MAX_HC_PORTS		127
+
+/*
+ * xHCI register interface.
+ * This corresponds to the eXtensible Host Controller Interface (xHCI)
+ * Revision 0.95 specification
+ *
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers.  Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+
+/**
+ * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
+ * @hc_capbase:		length of the capabilities register and HC version number
+ * @hcs_params1:	HCSPARAMS1 - Structural Parameters 1
+ * @hcs_params2:	HCSPARAMS2 - Structural Parameters 2
+ * @hcs_params3:	HCSPARAMS3 - Structural Parameters 3
+ * @hcc_params:		HCCPARAMS - Capability Parameters
+ * @db_off:		DBOFF - Doorbell array offset
+ * @run_regs_off:	RTSOFF - Runtime register space offset
+ */
+struct xhci_cap_regs {
+	u32	hc_capbase;
+	u32	hcs_params1;
+	u32	hcs_params2;
+	u32	hcs_params3;
+	u32	hcc_params;
+	u32	db_off;
+	u32	run_regs_off;
+	/* Reserved up to (CAPLENGTH - 0x1C) */
+};
+
+/* hc_capbase bitmasks */
+/* bits 7:0 - how long is the Capabilities register */
+#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
+/* bits 31:16	*/
+#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
+
+/* HCSPARAMS1 - hcs_params1 - bitmasks */
+/* bits 0:7, Max Device Slots */
+#define HCS_MAX_SLOTS(p)	(((p) >> 0) & 0xff)
+#define HCS_SLOTS_MASK		0xff
+/* bits 8:18, Max Interrupters */
+#define HCS_MAX_INTRS(p)	(((p) >> 8) & 0x7ff)
+/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
+#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
+
+/* HCSPARAMS2 - hcs_params2 - bitmasks */
+/* bits 0:3, frames or uframes that SW needs to queue transactions
+ * ahead of the HW to meet periodic deadlines */
+#define HCS_IST(p)		(((p) >> 0) & 0xf)
+/* bits 4:7, max number of Event Ring segments */
+#define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
+/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
+/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+
+/* HCSPARAMS3 - hcs_params3 - bitmasks */
+/* bits 0:7, Max U1 to U0 latency for the roothub ports */
+#define HCS_U1_LATENCY(p)	(((p) >> 0) & 0xff)
+/* bits 16:31, Max U2 to U0 latency for the roothub ports */
+#define HCS_U2_LATENCY(p)	(((p) >> 16) & 0xffff)
+
+/* HCCPARAMS - hcc_params - bitmasks */
+/* true: HC can use 64-bit address pointers */
+#define HCC_64BIT_ADDR(p)	((p) & (1 << 0))
+/* true: HC can do bandwidth negotiation */
+#define HCC_BANDWIDTH_NEG(p)	((p) & (1 << 1))
+/* true: HC uses 64-byte Device Context structures
+ * FIXME 64-byte context structures aren't supported yet.
+ */
+#define HCC_64BYTE_CONTEXT(p)	((p) & (1 << 2))
+/* true: HC has port power switches */
+#define HCC_PPC(p)		((p) & (1 << 3))
+/* true: HC has port indicators */
+#define HCS_INDICATOR(p)	((p) & (1 << 4))
+/* true: HC has Light HC Reset Capability */
+#define HCC_LIGHT_RESET(p)	((p) & (1 << 5))
+/* true: HC supports latency tolerance messaging */
+#define HCC_LTC(p)		((p) & (1 << 6))
+/* true: no secondary Stream ID Support */
+#define HCC_NSS(p)		((p) & (1 << 7))
+/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
+#define HCC_MAX_PSA		(1 << ((((p) >> 12) & 0xf) + 1))
+/* Extended Capabilities pointer from PCI base - section 5.3.6 */
+#define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
+
+/* db_off bitmask - bits 0:1 reserved */
+#define	DBOFF_MASK	(~0x3)
+
+/* run_regs_off bitmask - bits 0:4 reserved */
+#define	RTSOFF_MASK	(~0x1f)
+
+
+/* Number of registers per port */
+#define	NUM_PORT_REGS	4
+
+/**
+ * struct xhci_op_regs - xHCI Host Controller Operational Registers.
+ * @command:		USBCMD - xHC command register
+ * @status:		USBSTS - xHC status register
+ * @page_size:		This indicates the page size that the host controller
+ * 			supports.  If bit n is set, the HC supports a page size
+ * 			of 2^(n+12), up to a 128MB page size.
+ * 			4K is the minimum page size.
+ * @cmd_ring:		CRP - 64-bit Command Ring Pointer
+ * @dcbaa_ptr:		DCBAAP - 64-bit Device Context Base Address Array Pointer
+ * @config_reg:		CONFIG - Configure Register
+ * @port_status_base:	PORTSCn - base address for Port Status and Control
+ * 			Each port has a Port Status and Control register,
+ * 			followed by a Port Power Management Status and Control
+ * 			register, a Port Link Info register, and a reserved
+ * 			register.
+ * @port_power_base:	PORTPMSCn - base address for
+ * 			Port Power Management Status and Control
+ * @port_link_base:	PORTLIn - base address for Port Link Info (current
+ * 			Link PM state and control) for USB 2.1 and USB 3.0
+ * 			devices.
+ */
+struct xhci_op_regs {
+	u32	command;
+	u32	status;
+	u32	page_size;
+	u32	reserved1;
+	u32	reserved2;
+	u32	dev_notification;
+	u32	cmd_ring[2];
+	/* rsvd: offset 0x20-2F */
+	u32	reserved3[4];
+	u32	dcbaa_ptr[2];
+	u32	config_reg;
+	/* rsvd: offset 0x3C-3FF */
+	u32	reserved4[241];
+	/* port 1 registers, which serve as a base address for other ports */
+	u32	port_status_base;
+	u32	port_power_base;
+	u32	port_link_base;
+	u32	reserved5;
+	/* registers for ports 2-255 */
+	u32	reserved6[NUM_PORT_REGS*254];
+};
+
+/* USBCMD - USB command - command bitmasks */
+/* start/stop HC execution - do not write unless HC is halted*/
+#define CMD_RUN		XHCI_CMD_RUN
+/* Reset HC - resets internal HC state machine and all registers (except
+ * PCI config regs).  HC does NOT drive a USB reset on the downstream ports.
+ * The xHCI driver must reinitialize the xHC after setting this bit.
+ */
+#define CMD_RESET	(1 << 1)
+/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
+#define CMD_EIE		XHCI_CMD_EIE
+/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
+#define CMD_HSEIE	XHCI_CMD_HSEIE
+/* bits 4:6 are reserved (and should be preserved on writes). */
+/* light reset (port status stays unchanged) - reset completed when this is 0 */
+#define CMD_LRESET	(1 << 7)
+/* FIXME: ignoring host controller save/restore state for now. */
+#define CMD_CSS		(1 << 8)
+#define CMD_CRS		(1 << 9)
+/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
+#define CMD_EWE		XHCI_CMD_EWE
+/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
+ * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
+ * '0' means the xHC can power it off if all ports are in the disconnect,
+ * disabled, or powered-off state.
+ */
+#define CMD_PM_INDEX	(1 << 11)
+/* bits 12:31 are reserved (and should be preserved on writes). */
+
+/* USBSTS - USB status - status bitmasks */
+/* HC not running - set to 1 when run/stop bit is cleared. */
+#define STS_HALT	XHCI_STS_HALT
+/* serious error, e.g. PCI parity error.  The HC will clear the run/stop bit. */
+#define STS_FATAL	(1 << 2)
+/* event interrupt - clear this prior to clearing any IP flags in IR set*/
+#define STS_EINT	(1 << 3)
+/* port change detect */
+#define STS_PORT	(1 << 4)
+/* bits 5:7 reserved and zeroed */
+/* save state status - '1' means xHC is saving state */
+#define STS_SAVE	(1 << 8)
+/* restore state status - '1' means xHC is restoring state */
+#define STS_RESTORE	(1 << 9)
+/* true: save or restore error */
+#define STS_SRE		(1 << 10)
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define STS_CNR		XHCI_STS_CNR
+/* true: internal Host Controller Error - SW needs to reset and reinitialize */
+#define STS_HCE		(1 << 12)
+/* bits 13:31 reserved and should be preserved */
+
+/*
+ * DNCTRL - Device Notification Control Register - dev_notification bitmasks
+ * Generate a device notification event when the HC sees a transaction with a
+ * notification type that matches a bit set in this bit field.
+ */
+#define	DEV_NOTE_MASK		(0xffff)
+#define ENABLE_DEV_NOTE(x)	(1 << x)
+/* Most of the device notification types should only be used for debug.
+ * SW does need to pay attention to function wake notifications.
+ */
+#define	DEV_NOTE_FWAKE		ENABLE_DEV_NOTE(1)
+
+/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
+/* bit 0 is the command ring cycle state */
+/* stop ring operation after completion of the currently executing command */
+#define CMD_RING_PAUSE		(1 << 1)
+/* stop ring immediately - abort the currently executing command */
+#define CMD_RING_ABORT		(1 << 2)
+/* true: command ring is running */
+#define CMD_RING_RUNNING	(1 << 3)
+/* bits 4:5 reserved and should be preserved */
+/* Command Ring pointer - bit mask for the lower 32 bits. */
+#define CMD_RING_ADDR_MASK	(0xffffffc0)
+
+/* CONFIG - Configure Register - config_reg bitmasks */
+/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
+#define MAX_DEVS(p)	((p) & 0xff)
+/* bits 8:31 - reserved and should be preserved */
+
+/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
+/* true: device connected */
+#define PORT_CONNECT	(1 << 0)
+/* true: port enabled */
+#define PORT_PE		(1 << 1)
+/* bit 2 reserved and zeroed */
+/* true: port has an over-current condition */
+#define PORT_OC		(1 << 3)
+/* true: port reset signaling asserted */
+#define PORT_RESET	(1 << 4)
+/* Port Link State - bits 5:8
+ * A read gives the current link PM state of the port,
+ * a write with Link State Write Strobe set sets the link state.
+ */
+/* true: port has power (see HCC_PPC) */
+#define PORT_POWER	(1 << 9)
+/* bits 10:13 indicate device speed:
+ * 0 - undefined speed - port hasn't be initialized by a reset yet
+ * 1 - full speed
+ * 2 - low speed
+ * 3 - high speed
+ * 4 - super speed
+ * 5-15 reserved
+ */
+#define DEV_SPEED_MASK		(0xf << 10)
+#define	XDEV_FS			(0x1 << 10)
+#define	XDEV_LS			(0x2 << 10)
+#define	XDEV_HS			(0x3 << 10)
+#define	XDEV_SS			(0x4 << 10)
+#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))
+#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
+#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)
+#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
+#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
+/* Bits 20:23 in the Slot Context are the speed for the device */
+#define	SLOT_SPEED_FS		(XDEV_FS << 10)
+#define	SLOT_SPEED_LS		(XDEV_LS << 10)
+#define	SLOT_SPEED_HS		(XDEV_HS << 10)
+#define	SLOT_SPEED_SS		(XDEV_SS << 10)
+/* Port Indicator Control */
+#define PORT_LED_OFF	(0 << 14)
+#define PORT_LED_AMBER	(1 << 14)
+#define PORT_LED_GREEN	(2 << 14)
+#define PORT_LED_MASK	(3 << 14)
+/* Port Link State Write Strobe - set this when changing link state */
+#define PORT_LINK_STROBE	(1 << 16)
+/* true: connect status change */
+#define PORT_CSC	(1 << 17)
+/* true: port enable change */
+#define PORT_PEC	(1 << 18)
+/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
+ * into an enabled state, and the device into the default state.  A "warm" reset
+ * also resets the link, forcing the device through the link training sequence.
+ * SW can also look at the Port Reset register to see when warm reset is done.
+ */
+#define PORT_WRC	(1 << 19)
+/* true: over-current change */
+#define PORT_OCC	(1 << 20)
+/* true: reset change - 1 to 0 transition of PORT_RESET */
+#define PORT_RC		(1 << 21)
+/* port link status change - set on some port link state transitions:
+ *  Transition				Reason
+ *  ------------------------------------------------------------------------------
+ *  - U3 to Resume			Wakeup signaling from a device
+ *  - Resume to Recovery to U0		USB 3.0 device resume
+ *  - Resume to U0			USB 2.0 device resume
+ *  - U3 to Recovery to U0		Software resume of USB 3.0 device complete
+ *  - U3 to U0				Software resume of USB 2.0 device complete
+ *  - U2 to U0				L1 resume of USB 2.1 device complete
+ *  - U0 to U0 (???)			L1 entry rejection by USB 2.1 device
+ *  - U0 to disabled			L1 entry error with USB 2.1 device
+ *  - Any state to inactive		Error on USB 3.0 port
+ */
+#define PORT_PLC	(1 << 22)
+/* port configure error change - port failed to configure its link partner */
+#define PORT_CEC	(1 << 23)
+/* bit 24 reserved */
+/* wake on connect (enable) */
+#define PORT_WKCONN_E	(1 << 25)
+/* wake on disconnect (enable) */
+#define PORT_WKDISC_E	(1 << 26)
+/* wake on over-current (enable) */
+#define PORT_WKOC_E	(1 << 27)
+/* bits 28:29 reserved */
+/* true: device is removable - for USB 3.0 roothub emulation */
+#define PORT_DEV_REMOVE	(1 << 30)
+/* Initiate a warm port reset - complete when PORT_WRC is '1' */
+#define PORT_WR		(1 << 31)
+
+/* Port Power Management Status and Control - port_power_base bitmasks */
+/* Inactivity timer value for transitions into U1, in microseconds.
+ * Timeout can be up to 127us.  0xFF means an infinite timeout.
+ */
+#define PORT_U1_TIMEOUT(p)	((p) & 0xff)
+/* Inactivity timer value for transitions into U2 */
+#define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
+/* Bits 24:31 for port testing */
+
+
+/**
+ * struct xhci_intr_reg - Interrupt Register Set
+ * @irq_pending:	IMAN - Interrupt Management Register.  Used to enable
+ *			interrupts and check for pending interrupts.
+ * @irq_control:	IMOD - Interrupt Moderation Register.
+ * 			Used to throttle interrupts.
+ * @erst_size:		Number of segments in the Event Ring Segment Table (ERST).
+ * @erst_base:		ERST base address.
+ * @erst_dequeue:	Event ring dequeue pointer.
+ *
+ * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
+ * Ring Segment Table (ERST) associated with it.  The event ring is comprised of
+ * multiple segments of the same size.  The HC places events on the ring and
+ * "updates the Cycle bit in the TRBs to indicate to software the current
+ * position of the Enqueue Pointer." The HCD (Linux) processes those events and
+ * updates the dequeue pointer.
+ */
+struct xhci_intr_reg {
+	u32	irq_pending;
+	u32	irq_control;
+	u32	erst_size;
+	u32	rsvd;
+	u32	erst_base[2];
+	u32	erst_dequeue[2];
+};
+
+/* irq_pending bitmasks */
+#define	ER_IRQ_PENDING(p)	((p) & 0x1)
+/* bits 2:31 need to be preserved */
+/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
+#define	ER_IRQ_CLEAR(p)		((p) & 0xfffffffe)
+#define	ER_IRQ_ENABLE(p)	((ER_IRQ_CLEAR(p)) | 0x2)
+#define	ER_IRQ_DISABLE(p)	((ER_IRQ_CLEAR(p)) & ~(0x2))
+
+/* irq_control bitmasks */
+/* Minimum interval between interrupts (in 250ns intervals).  The interval
+ * between interrupts will be longer if there are no events on the event ring.
+ * Default is 4000 (1 ms).
+ */
+#define ER_IRQ_INTERVAL_MASK	(0xffff)
+/* Counter used to count down the time to the next interrupt - HW use only */
+#define ER_IRQ_COUNTER_MASK	(0xffff << 16)
+
+/* erst_size bitmasks */
+/* Preserve bits 16:31 of erst_size */
+#define	ERST_SIZE_MASK		(0xffff << 16)
+
+/* erst_dequeue bitmasks */
+/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
+ * where the current dequeue pointer lies.  This is an optional HW hint.
+ */
+#define ERST_DESI_MASK		(0x7)
+/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
+ * a work queue (or delayed service routine)?
+ */
+#define ERST_EHB		(1 << 3)
+#define ERST_PTR_MASK		(0xf)
+
+/**
+ * struct xhci_run_regs
+ * @microframe_index:
+ * 		MFINDEX - current microframe number
+ *
+ * Section 5.5 Host Controller Runtime Registers:
+ * "Software should read and write these registers using only Dword (32 bit)
+ * or larger accesses"
+ */
+struct xhci_run_regs {
+	u32			microframe_index;
+	u32			rsvd[7];
+	struct xhci_intr_reg	ir_set[128];
+};
+
+/**
+ * struct doorbell_array
+ *
+ * Section 5.6
+ */
+struct xhci_doorbell_array {
+	u32	doorbell[256];
+};
+
+#define	DB_TARGET_MASK		0xFFFFFF00
+#define	DB_STREAM_ID_MASK	0x0000FFFF
+#define	DB_TARGET_HOST		0x0
+#define	DB_STREAM_ID_HOST	0x0
+#define	DB_MASK			(0xff << 8)
+
+/* Endpoint Target - bits 0:7 */
+#define EPI_TO_DB(p)		(((p) + 1) & 0xff)
+
+
+/**
+ * struct xhci_slot_ctx
+ * @dev_info:	Route string, device speed, hub info, and last valid endpoint
+ * @dev_info2:	Max exit latency for device number, root hub port number
+ * @tt_info:	tt_info is used to construct split transaction tokens
+ * @dev_state:	slot state and device address
+ *
+ * Slot Context - section 6.2.1.1.  This assumes the HC uses 32-byte context
+ * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the slot context for HC internal use.
+ */
+struct xhci_slot_ctx {
+	u32	dev_info;
+	u32	dev_info2;
+	u32	tt_info;
+	u32	dev_state;
+	/* offset 0x10 to 0x1f reserved for HC internal use */
+	u32	reserved[4];
+};
+
+/* dev_info bitmasks */
+/* Route String - 0:19 */
+#define ROUTE_STRING_MASK	(0xfffff)
+/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
+#define DEV_SPEED	(0xf << 20)
+/* bit 24 reserved */
+/* Is this LS/FS device connected through a HS hub? - bit 25 */
+#define DEV_MTT		(0x1 << 25)
+/* Set if the device is a hub - bit 26 */
+#define DEV_HUB		(0x1 << 26)
+/* Index of the last valid endpoint context in this device context - 27:31 */
+#define LAST_CTX_MASK	(0x1f << 27)
+#define LAST_CTX(p)	((p) << 27)
+#define LAST_CTX_TO_EP_NUM(p)	(((p) >> 27) - 1)
+#define SLOT_FLAG	(1 << 0)
+#define EP0_FLAG	(1 << 1)
+
+/* dev_info2 bitmasks */
+/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
+#define MAX_EXIT	(0xffff)
+/* Root hub port number that is needed to access the USB device */
+#define ROOT_HUB_PORT(p)	(((p) & 0xff) << 16)
+
+/* tt_info bitmasks */
+/*
+ * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
+ * The Slot ID of the hub that isolates the high speed signaling from
+ * this low or full-speed device.  '0' if attached to root hub port.
+ */
+#define TT_SLOT		(0xff)
+/*
+ * The number of the downstream facing port of the high-speed hub
+ * '0' if the device is not low or full speed.
+ */
+#define TT_PORT		(0xff << 8)
+
+/* dev_state bitmasks */
+/* USB device address - assigned by the HC */
+#define DEV_ADDR_MASK	(0xff)
+/* bits 8:26 reserved */
+/* Slot state */
+#define SLOT_STATE	(0x1f << 27)
+#define GET_SLOT_STATE(p)	(((p) & (0x1f << 27)) >> 27)
+
+
+/**
+ * struct xhci_ep_ctx
+ * @ep_info:	endpoint state, streams, mult, and interval information.
+ * @ep_info2:	information on endpoint type, max packet size, max burst size,
+ * 		error count, and whether the HC will force an event for all
+ * 		transactions.
+ * @deq:	64-bit ring dequeue pointer address.  If the endpoint only
+ * 		defines one stream, this points to the endpoint transfer ring.
+ * 		Otherwise, it points to a stream context array, which has a
+ * 		ring pointer for each flow.
+ * @tx_info:
+ * 		Average TRB lengths for the endpoint ring and
+ * 		max payload within an Endpoint Service Interval Time (ESIT).
+ *
+ * Endpoint Context - section 6.2.1.2.  This assumes the HC uses 32-byte context
+ * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
+ * reserved at the end of the endpoint context for HC internal use.
+ */
+struct xhci_ep_ctx {
+	u32	ep_info;
+	u32	ep_info2;
+	u32	deq[2];
+	u32	tx_info;
+	/* offset 0x14 - 0x1f reserved for HC internal use */
+	u32	reserved[3];
+};
+
+/* ep_info bitmasks */
+/*
+ * Endpoint State - bits 0:2
+ * 0 - disabled
+ * 1 - running
+ * 2 - halted due to halt condition - ok to manipulate endpoint ring
+ * 3 - stopped
+ * 4 - TRB error
+ * 5-7 - reserved
+ */
+#define EP_STATE_MASK		(0xf)
+#define EP_STATE_DISABLED	0
+#define EP_STATE_RUNNING	1
+#define EP_STATE_HALTED		2
+#define EP_STATE_STOPPED	3
+#define EP_STATE_ERROR		4
+/* Mult - Max number of burtst within an interval, in EP companion desc. */
+#define EP_MULT(p)		((p & 0x3) << 8)
+/* bits 10:14 are Max Primary Streams */
+/* bit 15 is Linear Stream Array */
+/* Interval - period between requests to an endpoint - 125u increments. */
+#define EP_INTERVAL(p)		((p & 0xff) << 16)
+
+/* ep_info2 bitmasks */
+/*
+ * Force Event - generate transfer events for all TRBs for this endpoint
+ * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
+ */
+#define	FORCE_EVENT	(0x1)
+#define ERROR_COUNT(p)	(((p) & 0x3) << 1)
+#define EP_TYPE(p)	((p) << 3)
+#define ISOC_OUT_EP	1
+#define BULK_OUT_EP	2
+#define INT_OUT_EP	3
+#define CTRL_EP		4
+#define ISOC_IN_EP	5
+#define BULK_IN_EP	6
+#define INT_IN_EP	7
+/* bit 6 reserved */
+/* bit 7 is Host Initiate Disable - for disabling stream selection */
+#define MAX_BURST(p)	(((p)&0xff) << 8)
+#define MAX_PACKET(p)	(((p)&0xffff) << 16)
+
+
+/**
+ * struct xhci_device_control
+ * Input/Output context; see section 6.2.5.
+ *
+ * @drop_context:	set the bit of the endpoint context you want to disable
+ * @add_context:	set the bit of the endpoint context you want to enable
+ */
+struct xhci_device_control {
+	u32	drop_flags;
+	u32	add_flags;
+	u32	rsvd[6];
+	struct xhci_slot_ctx	slot;
+	struct xhci_ep_ctx	ep[31];
+};
+
+/* drop context bitmasks */
+#define	DROP_EP(x)	(0x1 << x)
+/* add context bitmasks */
+#define	ADD_EP(x)	(0x1 << x)
+
+
+struct xhci_virt_device {
+	/*
+	 * Commands to the hardware are passed an "input context" that
+	 * tells the hardware what to change in its data structures.
+	 * The hardware will return changes in an "output context" that
+	 * software must allocate for the hardware.  We need to keep
+	 * track of input and output contexts separately because
+	 * these commands might fail and we don't trust the hardware.
+	 */
+	struct xhci_device_control	*out_ctx;
+	dma_addr_t			out_ctx_dma;
+	/* Used for addressing devices and configuration changes */
+	struct xhci_device_control	*in_ctx;
+	dma_addr_t			in_ctx_dma;
+	/* FIXME when stream support is added */
+	struct xhci_ring		*ep_rings[31];
+	/* Temporary storage in case the configure endpoint command fails and we
+	 * have to restore the device state to the previous state
+	 */
+	struct xhci_ring		*new_ep_rings[31];
+	struct completion		cmd_completion;
+	/* Status of the last command issued for this device */
+	u32				cmd_status;
+};
+
+
+/**
+ * struct xhci_device_context_array
+ * @dev_context_ptr	array of 64-bit DMA addresses for device contexts
+ */
+struct xhci_device_context_array {
+	/* 64-bit device addresses; we only write 32-bit addresses */
+	u32			dev_context_ptrs[2*MAX_HC_SLOTS];
+	/* private xHCD pointers */
+	dma_addr_t	dma;
+};
+/* TODO: write function to set the 64-bit device DMA address */
+/*
+ * TODO: change this to be dynamically sized at HC mem init time since the HC
+ * might not be able to handle the maximum number of devices possible.
+ */
+
+
+struct xhci_stream_ctx {
+	/* 64-bit stream ring address, cycle state, and stream type */
+	u32	stream_ring[2];
+	/* offset 0x14 - 0x1f reserved for HC internal use */
+	u32	reserved[2];
+};
+
+
+struct xhci_transfer_event {
+	/* 64-bit buffer address, or immediate data */
+	u32	buffer[2];
+	u32	transfer_len;
+	/* This field is interpreted differently based on the type of TRB */
+	u32	flags;
+};
+
+/** Transfer Event bit fields **/
+#define	TRB_TO_EP_ID(p)	(((p) >> 16) & 0x1f)
+
+/* Completion Code - only applicable for some types of TRBs */
+#define	COMP_CODE_MASK		(0xff << 24)
+#define GET_COMP_CODE(p)	(((p) & COMP_CODE_MASK) >> 24)
+#define COMP_SUCCESS	1
+/* Data Buffer Error */
+#define COMP_DB_ERR	2
+/* Babble Detected Error */
+#define COMP_BABBLE	3
+/* USB Transaction Error */
+#define COMP_TX_ERR	4
+/* TRB Error - some TRB field is invalid */
+#define COMP_TRB_ERR	5
+/* Stall Error - USB device is stalled */
+#define COMP_STALL	6
+/* Resource Error - HC doesn't have memory for that device configuration */
+#define COMP_ENOMEM	7
+/* Bandwidth Error - not enough room in schedule for this dev config */
+#define COMP_BW_ERR	8
+/* No Slots Available Error - HC ran out of device slots */
+#define COMP_ENOSLOTS	9
+/* Invalid Stream Type Error */
+#define COMP_STREAM_ERR	10
+/* Slot Not Enabled Error - doorbell rung for disabled device slot */
+#define COMP_EBADSLT	11
+/* Endpoint Not Enabled Error */
+#define COMP_EBADEP	12
+/* Short Packet */
+#define COMP_SHORT_TX	13
+/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
+#define COMP_UNDERRUN	14
+/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
+#define COMP_OVERRUN	15
+/* Virtual Function Event Ring Full Error */
+#define COMP_VF_FULL	16
+/* Parameter Error - Context parameter is invalid */
+#define COMP_EINVAL	17
+/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
+#define COMP_BW_OVER	18
+/* Context State Error - illegal context state transition requested */
+#define COMP_CTX_STATE	19
+/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
+#define COMP_PING_ERR	20
+/* Event Ring is full */
+#define COMP_ER_FULL	21
+/* Missed Service Error - HC couldn't service an isoc ep within interval */
+#define COMP_MISSED_INT	23
+/* Successfully stopped command ring */
+#define COMP_CMD_STOP	24
+/* Successfully aborted current command and stopped command ring */
+#define COMP_CMD_ABORT	25
+/* Stopped - transfer was terminated by a stop endpoint command */
+#define COMP_STOP	26
+/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
+#define COMP_STOP_INVAL	27
+/* Control Abort Error - Debug Capability - control pipe aborted */
+#define COMP_DBG_ABORT	28
+/* TRB type 29 and 30 reserved */
+/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
+#define COMP_BUFF_OVER	31
+/* Event Lost Error - xHC has an "internal event overrun condition" */
+#define COMP_ISSUES	32
+/* Undefined Error - reported when other error codes don't apply */
+#define COMP_UNKNOWN	33
+/* Invalid Stream ID Error */
+#define COMP_STRID_ERR	34
+/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
+/* FIXME - check for this */
+#define COMP_2ND_BW_ERR	35
+/* Split Transaction Error */
+#define	COMP_SPLIT_ERR	36
+
+struct xhci_link_trb {
+	/* 64-bit segment pointer*/
+	u32 segment_ptr[2];
+	u32 intr_target;
+	u32 control;
+};
+
+/* control bitfields */
+#define LINK_TOGGLE	(0x1<<1)
+
+/* Command completion event TRB */
+struct xhci_event_cmd {
+	/* Pointer to command TRB, or the value passed by the event data trb */
+	u32 cmd_trb[2];
+	u32 status;
+	u32 flags;
+};
+
+/* flags bitmasks */
+/* bits 16:23 are the virtual function ID */
+/* bits 24:31 are the slot ID */
+#define TRB_TO_SLOT_ID(p)	(((p) & (0xff<<24)) >> 24)
+#define SLOT_ID_FOR_TRB(p)	(((p) & 0xff) << 24)
+
+/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
+#define TRB_TO_EP_INDEX(p)		((((p) & (0x1f << 16)) >> 16) - 1)
+#define	EP_ID_FOR_TRB(p)		((((p) + 1) & 0x1f) << 16)
+
+
+/* Port Status Change Event TRB fields */
+/* Port ID - bits 31:24 */
+#define GET_PORT_ID(p)		(((p) & (0xff << 24)) >> 24)
+
+/* Normal TRB fields */
+/* transfer_len bitmasks - bits 0:16 */
+#define	TRB_LEN(p)		((p) & 0x1ffff)
+/* TD size - number of bytes remaining in the TD (including this TRB):
+ * bits 17 - 21.  Shift the number of bytes by 10. */
+#define TD_REMAINDER(p)		((((p) >> 10) & 0x1f) << 17)
+/* Interrupter Target - which MSI-X vector to target the completion event at */
+#define TRB_INTR_TARGET(p)	(((p) & 0x3ff) << 22)
+#define GET_INTR_TARGET(p)	(((p) >> 22) & 0x3ff)
+
+/* Cycle bit - indicates TRB ownership by HC or HCD */
+#define TRB_CYCLE		(1<<0)
+/*
+ * Force next event data TRB to be evaluated before task switch.
+ * Used to pass OS data back after a TD completes.
+ */
+#define TRB_ENT			(1<<1)
+/* Interrupt on short packet */
+#define TRB_ISP			(1<<2)
+/* Set PCIe no snoop attribute */
+#define TRB_NO_SNOOP		(1<<3)
+/* Chain multiple TRBs into a TD */
+#define TRB_CHAIN		(1<<4)
+/* Interrupt on completion */
+#define TRB_IOC			(1<<5)
+/* The buffer pointer contains immediate data */
+#define TRB_IDT			(1<<6)
+
+
+/* Control transfer TRB specific fields */
+#define TRB_DIR_IN		(1<<16)
+
+struct xhci_generic_trb {
+	u32 field[4];
+};
+
+union xhci_trb {
+	struct xhci_link_trb		link;
+	struct xhci_transfer_event	trans_event;
+	struct xhci_event_cmd		event_cmd;
+	struct xhci_generic_trb		generic;
+};
+
+/* TRB bit mask */
+#define	TRB_TYPE_BITMASK	(0xfc00)
+#define TRB_TYPE(p)		((p) << 10)
+/* TRB type IDs */
+/* bulk, interrupt, isoc scatter/gather, and control data stage */
+#define TRB_NORMAL		1
+/* setup stage for control transfers */
+#define TRB_SETUP		2
+/* data stage for control transfers */
+#define TRB_DATA		3
+/* status stage for control transfers */
+#define TRB_STATUS		4
+/* isoc transfers */
+#define TRB_ISOC		5
+/* TRB for linking ring segments */
+#define TRB_LINK		6
+#define TRB_EVENT_DATA		7
+/* Transfer Ring No-op (not for the command ring) */
+#define TRB_TR_NOOP		8
+/* Command TRBs */
+/* Enable Slot Command */
+#define TRB_ENABLE_SLOT		9
+/* Disable Slot Command */
+#define TRB_DISABLE_SLOT	10
+/* Address Device Command */
+#define TRB_ADDR_DEV		11
+/* Configure Endpoint Command */
+#define TRB_CONFIG_EP		12
+/* Evaluate Context Command */
+#define TRB_EVAL_CONTEXT	13
+/* Reset Transfer Ring Command */
+#define TRB_RESET_RING		14
+/* Stop Transfer Ring Command */
+#define TRB_STOP_RING		15
+/* Set Transfer Ring Dequeue Pointer Command */
+#define TRB_SET_DEQ		16
+/* Reset Device Command */
+#define TRB_RESET_DEV		17
+/* Force Event Command (opt) */
+#define TRB_FORCE_EVENT		18
+/* Negotiate Bandwidth Command (opt) */
+#define TRB_NEG_BANDWIDTH	19
+/* Set Latency Tolerance Value Command (opt) */
+#define TRB_SET_LT		20
+/* Get port bandwidth Command */
+#define TRB_GET_BW		21
+/* Force Header Command - generate a transaction or link management packet */
+#define TRB_FORCE_HEADER	22
+/* No-op Command - not for transfer rings */
+#define TRB_CMD_NOOP		23
+/* TRB IDs 24-31 reserved */
+/* Event TRBS */
+/* Transfer Event */
+#define TRB_TRANSFER		32
+/* Command Completion Event */
+#define TRB_COMPLETION		33
+/* Port Status Change Event */
+#define TRB_PORT_STATUS		34
+/* Bandwidth Request Event (opt) */
+#define TRB_BANDWIDTH_EVENT	35
+/* Doorbell Event (opt) */
+#define TRB_DOORBELL		36
+/* Host Controller Event */
+#define TRB_HC_EVENT		37
+/* Device Notification Event - device sent function wake notification */
+#define TRB_DEV_NOTE		38
+/* MFINDEX Wrap Event - microframe counter wrapped */
+#define TRB_MFINDEX_WRAP	39
+/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
+
+/*
+ * TRBS_PER_SEGMENT must be a multiple of 4,
+ * since the command ring is 64-byte aligned.
+ * It must also be greater than 16.
+ */
+#define TRBS_PER_SEGMENT	64
+#define SEGMENT_SIZE		(TRBS_PER_SEGMENT*16)
+/* TRB buffer pointers can't cross 64KB boundaries */
+#define TRB_MAX_BUFF_SHIFT		16
+#define TRB_MAX_BUFF_SIZE	(1 << TRB_MAX_BUFF_SHIFT)
+
+struct xhci_segment {
+	union xhci_trb		*trbs;
+	/* private to HCD */
+	struct xhci_segment	*next;
+	dma_addr_t		dma;
+};
+
+struct xhci_td {
+	struct list_head	td_list;
+	struct list_head	cancelled_td_list;
+	struct urb		*urb;
+	struct xhci_segment	*start_seg;
+	union xhci_trb		*first_trb;
+	union xhci_trb		*last_trb;
+};
+
+struct xhci_ring {
+	struct xhci_segment	*first_seg;
+	union  xhci_trb		*enqueue;
+	struct xhci_segment	*enq_seg;
+	unsigned int		enq_updates;
+	union  xhci_trb		*dequeue;
+	struct xhci_segment	*deq_seg;
+	unsigned int		deq_updates;
+	struct list_head	td_list;
+	/* ----  Related to URB cancellation ---- */
+	struct list_head	cancelled_td_list;
+	unsigned int		cancels_pending;
+	unsigned int		state;
+#define SET_DEQ_PENDING		(1 << 0)
+	/* The TRB that was last reported in a stopped endpoint ring */
+	union xhci_trb		*stopped_trb;
+	struct xhci_td		*stopped_td;
+	/*
+	 * Write the cycle state into the TRB cycle field to give ownership of
+	 * the TRB to the host controller (if we are the producer), or to check
+	 * if we own the TRB (if we are the consumer).  See section 4.9.1.
+	 */
+	u32			cycle_state;
+};
+
+struct xhci_erst_entry {
+	/* 64-bit event ring segment address */
+	u32	seg_addr[2];
+	u32	seg_size;
+	/* Set to zero */
+	u32	rsvd;
+};
+
+struct xhci_erst {
+	struct xhci_erst_entry	*entries;
+	unsigned int		num_entries;
+	/* xhci->event_ring keeps track of segment dma addresses */
+	dma_addr_t		erst_dma_addr;
+	/* Num entries the ERST can contain */
+	unsigned int		erst_size;
+};
+
+/*
+ * Each segment table entry is 4*32bits long.  1K seems like an ok size:
+ * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
+ * meaning 64 ring segments.
+ * Initial allocated size of the ERST, in number of entries */
+#define	ERST_NUM_SEGS	1
+/* Initial allocated size of the ERST, in number of entries */
+#define	ERST_SIZE	64
+/* Initial number of event segment rings allocated */
+#define	ERST_ENTRIES	1
+/* Poll every 60 seconds */
+#define	POLL_TIMEOUT	60
+/* XXX: Make these module parameters */
+
+
+/* There is one ehci_hci structure per controller */
+struct xhci_hcd {
+	/* glue to PCI and HCD framework */
+	struct xhci_cap_regs __iomem *cap_regs;
+	struct xhci_op_regs __iomem *op_regs;
+	struct xhci_run_regs __iomem *run_regs;
+	struct xhci_doorbell_array __iomem *dba;
+	/* Our HCD's current interrupter register set */
+	struct	xhci_intr_reg __iomem *ir_set;
+
+	/* Cached register copies of read-only HC data */
+	__u32		hcs_params1;
+	__u32		hcs_params2;
+	__u32		hcs_params3;
+	__u32		hcc_params;
+
+	spinlock_t	lock;
+
+	/* packed release number */
+	u8		sbrn;
+	u16		hci_version;
+	u8		max_slots;
+	u8		max_interrupters;
+	u8		max_ports;
+	u8		isoc_threshold;
+	int		event_ring_max;
+	int		addr_64;
+	/* 4KB min, 128MB max */
+	int		page_size;
+	/* Valid values are 12 to 20, inclusive */
+	int		page_shift;
+	/* only one MSI vector for now, but might need more later */
+	int		msix_count;
+	struct msix_entry	*msix_entries;
+	/* data structures */
+	struct xhci_device_context_array *dcbaa;
+	struct xhci_ring	*cmd_ring;
+	struct xhci_ring	*event_ring;
+	struct xhci_erst	erst;
+	/* slot enabling and address device helpers */
+	struct completion	addr_dev;
+	int slot_id;
+	/* Internal mirror of the HW's dcbaa */
+	struct xhci_virt_device	*devs[MAX_HC_SLOTS];
+
+	/* DMA pools */
+	struct dma_pool	*device_pool;
+	struct dma_pool	*segment_pool;
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+	/* Poll the rings - for debugging */
+	struct timer_list	event_ring_timer;
+	int			zombie;
+#endif
+	/* Statistics */
+	int			noops_submitted;
+	int			noops_handled;
+	int			error_bitmask;
+};
+
+/* For testing purposes */
+#define NUM_TEST_NOOPS	0
+
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
+static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
+{
+	return (struct xhci_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
+{
+	return container_of((void *) xhci, struct usb_hcd, hcd_priv);
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+#define XHCI_DEBUG	1
+#else
+#define XHCI_DEBUG	0
+#endif
+
+#define xhci_dbg(xhci, fmt, args...) \
+	do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
+#define xhci_info(xhci, fmt, args...) \
+	do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
+#define xhci_err(xhci, fmt, args...) \
+	dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+#define xhci_warn(xhci, fmt, args...) \
+	dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+
+/* TODO: copied from ehci.h - can be refactored? */
+/* xHCI spec says all registers are little endian */
+static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
+		__u32 __iomem *regs)
+{
+	return readl(regs);
+}
+static inline void xhci_writel(struct xhci_hcd *xhci,
+		const unsigned int val, __u32 __iomem *regs)
+{
+	if (!in_interrupt())
+		xhci_dbg(xhci,
+			 "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+			 regs, val);
+	writel(val, regs);
+}
+
+/* xHCI debugging */
+void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
+void xhci_print_registers(struct xhci_hcd *xhci);
+void xhci_dbg_regs(struct xhci_hcd *xhci);
+void xhci_print_run_regs(struct xhci_hcd *xhci);
+void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
+void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
+void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
+void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
+void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
+void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+
+/* xHCI memory managment */
+void xhci_mem_cleanup(struct xhci_hcd *xhci);
+int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
+		struct usb_device *udev, struct usb_host_endpoint *ep,
+		gfp_t mem_flags);
+void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
+
+#ifdef CONFIG_PCI
+/* xHCI PCI glue */
+int xhci_register_pci(void);
+void xhci_unregister_pci(void);
+#endif
+
+/* xHCI host controller glue */
+int xhci_halt(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci);
+int xhci_init(struct usb_hcd *hcd);
+int xhci_run(struct usb_hcd *hcd);
+void xhci_stop(struct usb_hcd *hcd);
+void xhci_shutdown(struct usb_hcd *hcd);
+int xhci_get_frame(struct usb_hcd *hcd);
+irqreturn_t xhci_irq(struct usb_hcd *hcd);
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+
+/* xHCI ring, segment, TRB, and TD functions */
+dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
+void xhci_ring_cmd_db(struct xhci_hcd *xhci);
+void *xhci_setup_one_noop(struct xhci_hcd *xhci);
+void xhci_handle_event(struct xhci_hcd *xhci);
+void xhci_set_hc_event_deq(struct xhci_hcd *xhci);
+int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
+int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id);
+int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index);
+int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+		int slot_id, unsigned int ep_index);
+int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+		int slot_id, unsigned int ep_index);
+int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+		u32 slot_id);
+
+/* xHCI roothub code */
+int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
+		char *buf, u16 wLength);
+int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+
+#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index a4ef77ef917..3c5fe5cee05 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -726,12 +726,18 @@ static const struct file_operations iowarrior_fops = {
 	.poll = iowarrior_poll,
 };
 
+static char *iowarrior_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
 /*
  * usb class driver info in order to get a minor number from the usb core,
  * and to have the device registered with devfs and the driver core
  */
 static struct usb_class_driver iowarrior_class = {
 	.name = "iowarrior%d",
+	.nodename = iowarrior_nodename,
 	.fops = &iowarrior_fops,
 	.minor_base = IOWARRIOR_MINOR_BASE,
 };
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index ab0f3226158..c1e2433f640 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -266,12 +266,18 @@ static const struct file_operations tower_fops = {
 	.llseek =	tower_llseek,
 };
 
+static char *legousbtower_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
+}
+
 /*
  * usb class driver info in order to get a minor number from the usb core,
  * and to have the device registered with the driver core
  */
 static struct usb_class_driver tower_class = {
 	.name =		"legousbtower%d",
+	.nodename = 	legousbtower_nodename,
 	.fops =		&tower_fops,
 	.minor_base =	LEGO_USB_TOWER_MINOR_BASE,
 };
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 7603cbe0865..30ea7ca6846 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -1,7 +1,7 @@
 
 config USB_SISUSBVGA
 	tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
-	depends on USB && USB_EHCI_HCD
+	depends on USB && (USB_MUSB_HDRC || USB_EHCI_HCD)
         ---help---
 	  Say Y here if you intend to attach a USB2VGA dongle based on a
 	  Net2280 and a SiS315 chip.
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 5f1a19d1497..a9f06d76960 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1072,23 +1072,34 @@ static int unlink1 (struct usbtest_dev *dev, int pipe, int size, int async)
 	 */
 	msleep (jiffies % (2 * INTERRUPT_RATE));
 	if (async) {
-retry:
-		retval = usb_unlink_urb (urb);
-		if (retval == -EBUSY || retval == -EIDRM) {
-			/* we can't unlink urbs while they're completing.
-			 * or if they've completed, and we haven't resubmitted.
-			 * "normal" drivers would prevent resubmission, but
-			 * since we're testing unlink paths, we can't.
-			 */
-			ERROR(dev,  "unlink retry\n");
-			goto retry;
+		while (!completion_done(&completion)) {
+			retval = usb_unlink_urb(urb);
+
+			switch (retval) {
+			case -EBUSY:
+			case -EIDRM:
+				/* we can't unlink urbs while they're completing
+				 * or if they've completed, and we haven't
+				 * resubmitted. "normal" drivers would prevent
+				 * resubmission, but since we're testing unlink
+				 * paths, we can't.
+				 */
+				ERROR(dev, "unlink retry\n");
+				continue;
+			case 0:
+			case -EINPROGRESS:
+				break;
+
+			default:
+				dev_err(&dev->intf->dev,
+					"unlink fail %d\n", retval);
+				return retval;
+			}
+
+			break;
 		}
 	} else
 		usb_kill_urb (urb);
-	if (!(retval == 0 || retval == -EINPROGRESS)) {
-		dev_err(&dev->intf->dev, "unlink fail %d\n", retval);
-		return retval;
-	}
 
 	wait_for_completion (&completion);
 	retval = urb->status;
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 1f715436d6d..a7eb4c99342 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -733,7 +733,7 @@ int __init mon_text_init(void)
 {
 	struct dentry *mondir;
 
-	mondir = debugfs_create_dir("usbmon", NULL);
+	mondir = debugfs_create_dir("usbmon", usb_debug_root);
 	if (IS_ERR(mondir)) {
 		printk(KERN_NOTICE TAG ": debugfs is not available\n");
 		return -ENODEV;
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index b66e8544d8b..70073b157f0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -10,6 +10,7 @@ comment "Enable Host or Gadget support to see Inventra options"
 config USB_MUSB_HDRC
 	depends on (USB || USB_GADGET) && HAVE_CLK
 	depends on !SUPERH
+	select NOP_USB_XCEIV if ARCH_DAVINCI
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
@@ -55,6 +56,7 @@ comment "Blackfin high speed USB Support"
 config USB_TUSB6010
 	boolean "TUSB 6010 support"
 	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+	select NOP_USB_XCEIV
 	default y
 	help
 	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 78613485209..f2f66ebc736 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -143,7 +143,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 	u16 val;
 
 	spin_lock_irqsave(&musb->lock, flags);
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_IDLE:
 	case OTG_STATE_A_WAIT_BCON:
 		/* Start a new session */
@@ -154,7 +154,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 		val = musb_readw(musb->mregs, MUSB_DEVCTL);
 		if (!(val & MUSB_DEVCTL_BDEVICE)) {
 			gpio_set_value(musb->config->gpio_vrsel, 1);
-			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 		} else {
 			gpio_set_value(musb->config->gpio_vrsel, 0);
 
@@ -247,6 +247,11 @@ int __init musb_platform_init(struct musb *musb)
 	}
 	gpio_direction_output(musb->config->gpio_vrsel, 0);
 
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv)
+		return -ENODEV;
+
 	if (ANOMALY_05000346) {
 		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
 		SSYNC();
@@ -291,7 +296,7 @@ int __init musb_platform_init(struct musb *musb)
 			musb_conn_timer_handler, (unsigned long) musb);
 	}
 	if (is_peripheral_enabled(musb))
-		musb->xceiv.set_power = bfin_set_power;
+		musb->xceiv->set_power = bfin_set_power;
 
 	musb->isr = blackfin_interrupt;
 
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 1976e9b4180..c3577bbbae6 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -6,6 +6,7 @@
  * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
  */
 
+#include <linux/platform_device.h>
 #include <linux/usb.h>
 
 #include "musb_core.h"
@@ -1145,17 +1146,27 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 	return completed;
 }
 
-void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+irqreturn_t cppi_interrupt(int irq, void *dev_id)
 {
-	void __iomem		*tibase;
-	int			i, index;
+	struct musb		*musb = dev_id;
 	struct cppi		*cppi;
+	void __iomem		*tibase;
 	struct musb_hw_ep	*hw_ep = NULL;
+	u32			rx, tx;
+	int			i, index;
 
 	cppi = container_of(musb->dma_controller, struct cppi, controller);
 
 	tibase = musb->ctrl_base;
 
+	tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+	rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+	if (!tx && !rx)
+		return IRQ_NONE;
+
+	DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
+
 	/* process TX channels */
 	for (index = 0; tx; tx = tx >> 1, index++) {
 		struct cppi_channel		*tx_ch;
@@ -1273,6 +1284,8 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx)
 
 	/* write to CPPI EOI register to re-enable interrupts */
 	musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+
+	return IRQ_HANDLED;
 }
 
 /* Instantiate a software object representing a DMA controller. */
@@ -1280,6 +1293,9 @@ struct dma_controller *__init
 dma_controller_create(struct musb *musb, void __iomem *mregs)
 {
 	struct cppi		*controller;
+	struct device		*dev = musb->controller;
+	struct platform_device	*pdev = to_platform_device(dev);
+	int			irq = platform_get_irq(pdev, 1);
 
 	controller = kzalloc(sizeof *controller, GFP_KERNEL);
 	if (!controller)
@@ -1310,6 +1326,15 @@ dma_controller_create(struct musb *musb, void __iomem *mregs)
 		return NULL;
 	}
 
+	if (irq > 0) {
+		if (request_irq(irq, cppi_interrupt, 0, "cppi-dma", musb)) {
+			dev_err(dev, "request_irq %d failed!\n", irq);
+			dma_controller_destroy(&controller->controller);
+			return NULL;
+		}
+		controller->irq = irq;
+	}
+
 	return &controller->controller;
 }
 
@@ -1322,6 +1347,9 @@ void dma_controller_destroy(struct dma_controller *c)
 
 	cppi = container_of(c, struct cppi, controller);
 
+	if (cppi->irq)
+		free_irq(cppi->irq, cppi->musb);
+
 	/* assert:  caller stopped the controller first */
 	dma_pool_destroy(cppi->pool);
 
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 729b4071787..8a39de3e6e4 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -119,6 +119,8 @@ struct cppi {
 	void __iomem			*mregs;		/* Mentor regs */
 	void __iomem			*tibase;	/* TI/CPPI regs */
 
+	int				irq;
+
 	struct cppi_channel		tx[4];
 	struct cppi_channel		rx[4];
 
@@ -127,7 +129,7 @@ struct cppi {
 	struct list_head		tx_complete;
 };
 
-/* irq handling hook */
-extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+/* CPPI IRQ handler */
+extern irqreturn_t cppi_interrupt(int, void *);
 
 #endif				/* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 10d11ab113a..180d7daa409 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -215,7 +215,7 @@ static void otg_timer(unsigned long _musb)
 	DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
 
 	spin_lock_irqsave(&musb->lock, flags);
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_VFALL:
 		/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
 		 * seems to mis-handle session "start" otherwise (or in our
@@ -226,7 +226,7 @@ static void otg_timer(unsigned long _musb)
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 			break;
 		}
-		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
 			MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
 		break;
@@ -251,7 +251,7 @@ static void otg_timer(unsigned long _musb)
 		if (devctl & MUSB_DEVCTL_BDEVICE)
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 		else
-			musb->xceiv.state = OTG_STATE_A_IDLE;
+			musb->xceiv->state = OTG_STATE_A_IDLE;
 		break;
 	default:
 		break;
@@ -265,6 +265,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 	irqreturn_t	retval = IRQ_NONE;
 	struct musb	*musb = __hci;
 	void __iomem	*tibase = musb->ctrl_base;
+	struct cppi	*cppi;
 	u32		tmp;
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -281,16 +282,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 	/* CPPI interrupts share the same IRQ line, but have their own
 	 * mask, state, "vector", and EOI registers.
 	 */
-	if (is_cppi_enabled()) {
-		u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
-		u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
-
-		if (cppi_tx || cppi_rx) {
-			DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
-			cppi_completion(musb, cppi_rx, cppi_tx);
-			retval = IRQ_HANDLED;
-		}
-	}
+	cppi = container_of(musb->dma_controller, struct cppi, controller);
+	if (is_cppi_enabled() && musb->dma_controller && !cppi->irq)
+		retval = cppi_interrupt(irq, __hci);
 
 	/* ack and handle non-CPPI interrupts */
 	tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
@@ -331,21 +325,21 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 			 * to stop registering in devctl.
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
-			musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (is_host_enabled(musb) && drvvbus) {
 			musb->is_active = 1;
 			MUSB_HST_MODE(musb);
-			musb->xceiv.default_a = 1;
-			musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+			musb->xceiv->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
 			del_timer(&otg_workaround);
 		} else {
 			musb->is_active = 0;
 			MUSB_DEV_MODE(musb);
-			musb->xceiv.default_a = 0;
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->default_a = 0;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
 		}
 
@@ -367,17 +361,12 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 
 	/* poll for ID change */
 	if (is_otg_enabled(musb)
-			&& musb->xceiv.state == OTG_STATE_B_IDLE)
+			&& musb->xceiv->state == OTG_STATE_B_IDLE)
 		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
 
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	/* REVISIT we sometimes get unhandled IRQs
-	 * (e.g. ep0).  not clear why...
-	 */
-	if (retval != IRQ_HANDLED)
-		DBG(5, "unhandled? %08x\n", tmp);
-	return IRQ_HANDLED;
+	return retval;
 }
 
 int musb_platform_set_mode(struct musb *musb, u8 mode)
@@ -391,6 +380,11 @@ int __init musb_platform_init(struct musb *musb)
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;
 
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv)
+		return -ENODEV;
+
 	musb->mregs += DAVINCI_BASE_OFFSET;
 
 	clk_enable(musb->clock);
@@ -398,7 +392,7 @@ int __init musb_platform_init(struct musb *musb)
 	/* returns zero if e.g. not clocked */
 	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
 	if (revision == 0)
-		return -ENODEV;
+		goto fail;
 
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
@@ -432,6 +426,10 @@ int __init musb_platform_init(struct musb *musb)
 
 	musb->isr = davinci_interrupt;
 	return 0;
+
+fail:
+	usb_nop_xceiv_unregister();
+	return -ENODEV;
 }
 
 int musb_platform_exit(struct musb *musb)
@@ -442,7 +440,7 @@ int musb_platform_exit(struct musb *musb)
 	davinci_source_power(musb, 0 /*off*/, 1);
 
 	/* delay, to avoid problems with module reload */
-	if (is_host_enabled(musb) && musb->xceiv.default_a) {
+	if (is_host_enabled(musb) && musb->xceiv->default_a) {
 		int	maxdelay = 30;
 		u8	devctl, warn = 0;
 
@@ -471,5 +469,7 @@ int musb_platform_exit(struct musb *musb)
 
 	clk_disable(musb->clock);
 
+	usb_nop_xceiv_unregister();
+
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4000cf6d1e8..554a414f65d 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -112,6 +112,7 @@
 #include "davinci.h"
 #endif
 
+#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
 
 
 unsigned musb_debug;
@@ -267,7 +268,7 @@ void musb_load_testpacket(struct musb *musb)
 
 const char *otg_state_string(struct musb *musb)
 {
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_IDLE:		return "a_idle";
 	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
 	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
@@ -288,12 +289,6 @@ const char *otg_state_string(struct musb *musb)
 #ifdef	CONFIG_USB_MUSB_OTG
 
 /*
- * See also USB_OTG_1-3.pdf 6.6.5 Timers
- * REVISIT: Are the other timers done in the hardware?
- */
-#define TB_ASE0_BRST		100	/* Min 3.125 ms */
-
-/*
  * Handles OTG hnp timeouts, such as b_ase0_brst
  */
 void musb_otg_timer_func(unsigned long data)
@@ -302,16 +297,18 @@ void musb_otg_timer_func(unsigned long data)
 	unsigned long	flags;
 
 	spin_lock_irqsave(&musb->lock, flags);
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_B_WAIT_ACON:
 		DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
 		musb_g_disconnect(musb);
-		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		musb->is_active = 0;
 		break;
+	case OTG_STATE_A_SUSPEND:
 	case OTG_STATE_A_WAIT_BCON:
-		DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
-		musb_hnp_stop(musb);
+		DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
+		musb_set_vbus(musb, 0);
+		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 		break;
 	default:
 		DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
@@ -320,10 +317,8 @@ void musb_otg_timer_func(unsigned long data)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
-
 /*
- * Stops the B-device HNP state. Caller must take care of locking.
+ * Stops the HNP transition. Caller must take care of locking.
  */
 void musb_hnp_stop(struct musb *musb)
 {
@@ -331,20 +326,17 @@ void musb_hnp_stop(struct musb *musb)
 	void __iomem	*mbase = musb->mregs;
 	u8	reg;
 
-	switch (musb->xceiv.state) {
+	DBG(1, "HNP: stop from %s\n", otg_state_string(musb));
+
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_PERIPHERAL:
-	case OTG_STATE_A_WAIT_VFALL:
-	case OTG_STATE_A_WAIT_BCON:
-		DBG(1, "HNP: Switching back to A-host\n");
 		musb_g_disconnect(musb);
-		musb->xceiv.state = OTG_STATE_A_IDLE;
-		MUSB_HST_MODE(musb);
-		musb->is_active = 0;
+		DBG(1, "HNP: back to %s\n", otg_state_string(musb));
 		break;
 	case OTG_STATE_B_HOST:
 		DBG(1, "HNP: Disabling HR\n");
 		hcd->self.is_b_host = 0;
-		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		MUSB_DEV_MODE(musb);
 		reg = musb_readb(mbase, MUSB_POWER);
 		reg |= MUSB_POWER_SUSPENDM;
@@ -402,7 +394,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		if (devctl & MUSB_DEVCTL_HM) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 			case OTG_STATE_A_SUSPEND:
 				/* remote wakeup?  later, GetPortStatus
 				 * will stop RESUME signaling
@@ -425,12 +417,12 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				musb->rh_timer = jiffies
 						+ msecs_to_jiffies(20);
 
-				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->xceiv->state = OTG_STATE_A_HOST;
 				musb->is_active = 1;
 				usb_hcd_resume_root_hub(musb_to_hcd(musb));
 				break;
 			case OTG_STATE_B_WAIT_ACON:
-				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				musb->is_active = 1;
 				MUSB_DEV_MODE(musb);
 				break;
@@ -441,11 +433,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			}
 #endif
 		} else {
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 			case OTG_STATE_A_SUSPEND:
 				/* possibly DISCONNECT is upcoming */
-				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->xceiv->state = OTG_STATE_A_HOST;
 				usb_hcd_resume_root_hub(musb_to_hcd(musb));
 				break;
 #endif
@@ -490,7 +482,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		 */
 		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
 		musb->ep0_stage = MUSB_EP0_START;
-		musb->xceiv.state = OTG_STATE_A_IDLE;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
 		musb_set_vbus(musb, 1);
 
@@ -516,7 +508,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
 		 * make trouble here, keeping VBUS < 4.4V ?
 		 */
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_A_HOST:
 			/* recovery is dicey once we've gotten past the
 			 * initial stages of enumeration, but if VBUS
@@ -594,37 +586,40 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		if (devctl & MUSB_DEVCTL_LSDEV)
 			musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
 
-		if (hcd->status_urb)
-			usb_hcd_poll_rh_status(hcd);
-		else
-			usb_hcd_resume_root_hub(hcd);
-
-		MUSB_HST_MODE(musb);
-
 		/* indicate new connection to OTG machine */
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_B_PERIPHERAL:
 			if (int_usb & MUSB_INTR_SUSPEND) {
 				DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
-				musb->xceiv.state = OTG_STATE_B_HOST;
-				hcd->self.is_b_host = 1;
 				int_usb &= ~MUSB_INTR_SUSPEND;
+				goto b_host;
 			} else
 				DBG(1, "CONNECT as b_peripheral???\n");
 			break;
 		case OTG_STATE_B_WAIT_ACON:
-			DBG(1, "HNP: Waiting to switch to b_host state\n");
-			musb->xceiv.state = OTG_STATE_B_HOST;
+			DBG(1, "HNP: CONNECT, now b_host\n");
+b_host:
+			musb->xceiv->state = OTG_STATE_B_HOST;
 			hcd->self.is_b_host = 1;
+			musb->ignore_disconnect = 0;
+			del_timer(&musb->otg_timer);
 			break;
 		default:
 			if ((devctl & MUSB_DEVCTL_VBUS)
 					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
-				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->xceiv->state = OTG_STATE_A_HOST;
 				hcd->self.is_b_host = 0;
 			}
 			break;
 		}
+
+		/* poke the root hub */
+		MUSB_HST_MODE(musb);
+		if (hcd->status_urb)
+			usb_hcd_poll_rh_status(hcd);
+		else
+			usb_hcd_resume_root_hub(hcd);
+
 		DBG(1, "CONNECT (%s) devctl %02x\n",
 				otg_state_string(musb), devctl);
 	}
@@ -650,7 +645,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			}
 		} else if (is_peripheral_capable()) {
 			DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 #ifdef CONFIG_USB_OTG
 			case OTG_STATE_A_SUSPEND:
 				/* We need to ignore disconnect on suspend
@@ -661,24 +656,27 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				musb_g_reset(musb);
 				/* FALLTHROUGH */
 			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
-				DBG(1, "HNP: Setting timer as %s\n",
-						otg_state_string(musb));
-				musb_otg_timer.data = (unsigned long)musb;
-				mod_timer(&musb_otg_timer, jiffies
-					+ msecs_to_jiffies(100));
+				/* never use invalid T(a_wait_bcon) */
+				DBG(1, "HNP: in %s, %d msec timeout\n",
+						otg_state_string(musb),
+						TA_WAIT_BCON(musb));
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
 				break;
 			case OTG_STATE_A_PERIPHERAL:
-				musb_hnp_stop(musb);
+				musb->ignore_disconnect = 0;
+				del_timer(&musb->otg_timer);
+				musb_g_reset(musb);
 				break;
 			case OTG_STATE_B_WAIT_ACON:
 				DBG(1, "HNP: RESET (%s), to b_peripheral\n",
 					otg_state_string(musb));
-				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				musb_g_reset(musb);
 				break;
 #endif
 			case OTG_STATE_B_IDLE:
-				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				/* FALLTHROUGH */
 			case OTG_STATE_B_PERIPHERAL:
 				musb_g_reset(musb);
@@ -763,7 +761,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 				MUSB_MODE(musb), devctl);
 		handled = IRQ_HANDLED;
 
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 		case OTG_STATE_A_HOST:
 		case OTG_STATE_A_SUSPEND:
@@ -776,7 +774,16 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 #endif	/* HOST */
 #ifdef CONFIG_USB_MUSB_OTG
 		case OTG_STATE_B_HOST:
-			musb_hnp_stop(musb);
+			/* REVISIT this behaves for "real disconnect"
+			 * cases; make sure the other transitions from
+			 * from B_HOST act right too.  The B_HOST code
+			 * in hnp_stop() is currently not used...
+			 */
+			musb_root_disconnect(musb);
+			musb_to_hcd(musb)->self.is_b_host = 0;
+			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+			MUSB_DEV_MODE(musb);
+			musb_g_disconnect(musb);
 			break;
 		case OTG_STATE_A_PERIPHERAL:
 			musb_hnp_stop(musb);
@@ -805,26 +812,35 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 				otg_state_string(musb), devctl, power);
 		handled = IRQ_HANDLED;
 
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 #ifdef	CONFIG_USB_MUSB_OTG
 		case OTG_STATE_A_PERIPHERAL:
-			/*
-			 * We cannot stop HNP here, devctl BDEVICE might be
-			 * still set.
+			/* We also come here if the cable is removed, since
+			 * this silicon doesn't report ID-no-longer-grounded.
+			 *
+			 * We depend on T(a_wait_bcon) to shut us down, and
+			 * hope users don't do anything dicey during this
+			 * undesired detour through A_WAIT_BCON.
 			 */
+			musb_hnp_stop(musb);
+			usb_hcd_resume_root_hub(musb_to_hcd(musb));
+			musb_root_disconnect(musb);
+			musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon
+						? : OTG_TIME_A_WAIT_BCON));
 			break;
 #endif
 		case OTG_STATE_B_PERIPHERAL:
 			musb_g_suspend(musb);
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.gadget->b_hnp_enable;
+					&& musb->xceiv->gadget->b_hnp_enable;
 			if (musb->is_active) {
 #ifdef	CONFIG_USB_MUSB_OTG
-				musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 				DBG(1, "HNP: Setting timer for b_ase0_brst\n");
-				musb_otg_timer.data = (unsigned long)musb;
-				mod_timer(&musb_otg_timer, jiffies
-					+ msecs_to_jiffies(TB_ASE0_BRST));
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(
+							OTG_TIME_B_ASE0_BRST));
 #endif
 			}
 			break;
@@ -834,9 +850,9 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
 					+ msecs_to_jiffies(musb->a_wait_bcon));
 			break;
 		case OTG_STATE_A_HOST:
-			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->xceiv->state = OTG_STATE_A_SUSPEND;
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.host->b_hnp_enable;
+					&& musb->xceiv->host->b_hnp_enable;
 			break;
 		case OTG_STATE_B_HOST:
 			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -1068,14 +1084,13 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
 { .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
-{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 512, },
-{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 512, },
-{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 512, },
-{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 512, },
-{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 512, },
-{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 512, },
-{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 512, },
-{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
 { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
 };
@@ -1335,11 +1350,11 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 	}
 	if (reg & MUSB_CONFIGDATA_HBRXE) {
 		strcat(aInfo, ", HB-ISO Rx");
-		strcat(aInfo, " (X)");		/* no driver support */
+		musb->hb_iso_rx = true;
 	}
 	if (reg & MUSB_CONFIGDATA_HBTXE) {
 		strcat(aInfo, ", HB-ISO Tx");
-		strcat(aInfo, " (X)");		/* no driver support */
+		musb->hb_iso_tx = true;
 	}
 	if (reg & MUSB_CONFIGDATA_SOFTCONE)
 		strcat(aInfo, ", SoftConn");
@@ -1481,13 +1496,7 @@ static irqreturn_t generic_interrupt(int irq, void *__hci)
 
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	/* REVISIT we sometimes get spurious IRQs on g_ep0
-	 * not clear why...
-	 */
-	if (retval != IRQ_HANDLED)
-		DBG(5, "spurious?\n");
-
-	return IRQ_HANDLED;
+	return retval;
 }
 
 #else
@@ -1687,8 +1696,9 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr,
 	}
 
 	spin_lock_irqsave(&musb->lock, flags);
-	musb->a_wait_bcon = val;
-	if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+	/* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
+	musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
+	if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
 		musb->is_active = 0;
 	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -1706,10 +1716,13 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
 
 	spin_lock_irqsave(&musb->lock, flags);
 	val = musb->a_wait_bcon;
+	/* FIXME get_vbus_status() is normally #defined as false...
+	 * and is effectively TUSB-specific.
+	 */
 	vbus = musb_platform_get_vbus_status(musb);
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	return sprintf(buf, "Vbus %s, timeout %lu\n",
+	return sprintf(buf, "Vbus %s, timeout %lu msec\n",
 			vbus ? "on" : "off", val);
 }
 static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
@@ -1749,8 +1762,8 @@ static void musb_irq_work(struct work_struct *data)
 	struct musb *musb = container_of(data, struct musb, irq_work);
 	static int old_state;
 
-	if (musb->xceiv.state != old_state) {
-		old_state = musb->xceiv.state;
+	if (musb->xceiv->state != old_state) {
+		old_state = musb->xceiv->state;
 		sysfs_notify(&musb->controller->kobj, NULL, "mode");
 	}
 }
@@ -1782,6 +1795,7 @@ allocate_instance(struct device *dev,
 	hcd->uses_new_polling = 1;
 
 	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
 #else
 	musb = kzalloc(sizeof *musb, GFP_KERNEL);
 	if (!musb)
@@ -1847,7 +1861,7 @@ static void musb_free(struct musb *musb)
 	}
 
 #ifdef CONFIG_USB_MUSB_OTG
-	put_device(musb->xceiv.dev);
+	put_device(musb->xceiv->dev);
 #endif
 
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
@@ -1928,10 +1942,18 @@ bad_config:
 		}
 	}
 
-	/* assume vbus is off */
-
-	/* platform adjusts musb->mregs and musb->isr if needed,
-	 * and activates clocks
+	/* The musb_platform_init() call:
+	 *   - adjusts musb->mregs and musb->isr if needed,
+	 *   - may initialize an integrated tranceiver
+	 *   - initializes musb->xceiv, usually by otg_get_transceiver()
+	 *   - activates clocks.
+	 *   - stops powering VBUS
+	 *   - assigns musb->board_set_vbus if host mode is enabled
+	 *
+	 * There are various transciever configurations.  Blackfin,
+	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
+	 * external/discrete ones in various flavors (twl4030 family,
+	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
 	 */
 	musb->isr = generic_interrupt;
 	status = musb_platform_init(musb);
@@ -1968,6 +1990,10 @@ bad_config:
 	if (status < 0)
 		goto fail2;
 
+#ifdef CONFIG_USB_OTG
+	setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
+#endif
+
 	/* Init IRQ workqueue before request_irq */
 	INIT_WORK(&musb->irq_work, musb_irq_work);
 
@@ -1999,17 +2025,17 @@ bad_config:
 				? "DMA" : "PIO",
 			musb->nIrq);
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	/* host side needs more setup, except for no-host modes */
-	if (musb->board_mode != MUSB_PERIPHERAL) {
+	/* host side needs more setup */
+	if (is_host_enabled(musb)) {
 		struct usb_hcd	*hcd = musb_to_hcd(musb);
 
-		if (musb->board_mode == MUSB_OTG)
+		otg_set_host(musb->xceiv, &hcd->self);
+
+		if (is_otg_enabled(musb))
 			hcd->self.otg_port = 1;
-		musb->xceiv.host = &hcd->self;
+		musb->xceiv->host = &hcd->self;
 		hcd->power_budget = 2 * (plat->power ? : 250);
 	}
-#endif				/* CONFIG_USB_MUSB_HDRC_HCD */
 
 	/* For the host-only role, we can activate right away.
 	 * (We expect the ID pin to be forcibly grounded!!)
@@ -2017,8 +2043,8 @@ bad_config:
 	 */
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
 		MUSB_HST_MODE(musb);
-		musb->xceiv.default_a = 1;
-		musb->xceiv.state = OTG_STATE_A_IDLE;
+		musb->xceiv->default_a = 1;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
 
 		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
 		if (status)
@@ -2033,8 +2059,8 @@ bad_config:
 
 	} else /* peripheral is enabled */ {
 		MUSB_DEV_MODE(musb);
-		musb->xceiv.default_a = 0;
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->default_a = 0;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 
 		status = musb_gadget_setup(musb);
 		if (status)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index efb39b5e55b..f3772ca3b2c 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -40,6 +40,7 @@
 #include <linux/interrupt.h>
 #include <linux/smp_lock.h>
 #include <linux/errno.h>
+#include <linux/timer.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/usb/ch9.h>
@@ -171,7 +172,8 @@ enum musb_h_ep0_state {
 
 /* peripheral side ep0 states */
 enum musb_g_ep0_state {
-	MUSB_EP0_STAGE_SETUP,		/* idle, waiting for setup */
+	MUSB_EP0_STAGE_IDLE,		/* idle, waiting for SETUP */
+	MUSB_EP0_STAGE_SETUP,		/* received SETUP */
 	MUSB_EP0_STAGE_TX,		/* IN data */
 	MUSB_EP0_STAGE_RX,		/* OUT data */
 	MUSB_EP0_STAGE_STATUSIN,	/* (after OUT data) */
@@ -179,10 +181,15 @@ enum musb_g_ep0_state {
 	MUSB_EP0_STAGE_ACKWAIT,		/* after zlp, before statusin */
 } __attribute__ ((packed));
 
-/* OTG protocol constants */
+/*
+ * OTG protocol constants.  See USB OTG 1.3 spec,
+ * sections 5.5 "Device Timings" and 6.6.5 "Timers".
+ */
 #define OTG_TIME_A_WAIT_VRISE	100		/* msec (max) */
-#define OTG_TIME_A_WAIT_BCON	0		/* 0=infinite; min 1000 msec */
-#define OTG_TIME_A_IDLE_BDIS	200		/* msec (min) */
+#define OTG_TIME_A_WAIT_BCON	1100		/* min 1 second */
+#define OTG_TIME_A_AIDL_BDIS	200		/* min 200 msec */
+#define OTG_TIME_B_ASE0_BRST	100		/* min 3.125 ms */
+
 
 /*************************** REGISTER ACCESS ********************************/
 
@@ -331,6 +338,8 @@ struct musb {
 	struct list_head	control;	/* of musb_qh */
 	struct list_head	in_bulk;	/* of musb_qh */
 	struct list_head	out_bulk;	/* of musb_qh */
+
+	struct timer_list	otg_timer;
 #endif
 
 	/* called with IRQs blocked; ON/nonzero implies starting a session,
@@ -355,7 +364,7 @@ struct musb {
 	u16			int_rx;
 	u16			int_tx;
 
-	struct otg_transceiver	xceiv;
+	struct otg_transceiver	*xceiv;
 
 	int nIrq;
 	unsigned		irq_wake:1;
@@ -386,6 +395,9 @@ struct musb {
 	unsigned is_multipoint:1;
 	unsigned ignore_disconnect:1;	/* during bus resets */
 
+	unsigned		hb_iso_rx:1;	/* high bandwidth iso rx? */
+	unsigned		hb_iso_tx:1;	/* high bandwidth iso tx? */
+
 #ifdef C_MP_TX
 	unsigned bulk_split:1;
 #define	can_bulk_split(musb,type) \
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f79440cdfe7..8b3c4e2ed7b 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -310,7 +310,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 			/* setup DMA, then program endpoint CSR */
 			request_size = min(request->length,
 						musb_ep->dma->max_len);
-			if (request_size <= musb_ep->packet_sz)
+			if (request_size < musb_ep->packet_sz)
 				musb_ep->dma->desired_mode = 0;
 			else
 				musb_ep->dma->desired_mode = 1;
@@ -349,7 +349,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
 #elif defined(CONFIG_USB_TI_CPPI_DMA)
 		/* program endpoint CSR first, then setup DMA */
 		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
-		csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+		csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE |
+		       MUSB_TXCSR_MODE;
 		musb_writew(epio, MUSB_TXCSR,
 			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
 				| csr);
@@ -1405,7 +1406,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_B_PERIPHERAL:
 		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
 		 * that's part of the standard usb 1.1 state machine, and
@@ -1507,9 +1508,9 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 {
 	struct musb	*musb = gadget_to_musb(gadget);
 
-	if (!musb->xceiv.set_power)
+	if (!musb->xceiv->set_power)
 		return -EOPNOTSUPP;
-	return otg_set_power(&musb->xceiv, mA);
+	return otg_set_power(musb->xceiv, mA);
 }
 
 static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
@@ -1732,11 +1733,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 
 		spin_lock_irqsave(&musb->lock, flags);
 
-		/* REVISIT always use otg_set_peripheral(), handling
-		 * issues including the root hub one below ...
-		 */
-		musb->xceiv.gadget = &musb->g;
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		otg_set_peripheral(musb->xceiv, &musb->g);
 		musb->is_active = 1;
 
 		/* FIXME this ignores the softconnect flag.  Drivers are
@@ -1748,6 +1745,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 		if (!is_otg_enabled(musb))
 			musb_start(musb);
 
+		otg_set_peripheral(musb->xceiv, &musb->g);
+
 		spin_unlock_irqrestore(&musb->lock, flags);
 
 		if (is_otg_enabled(musb)) {
@@ -1761,8 +1760,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 			if (retval < 0) {
 				DBG(1, "add_hcd failed, %d\n", retval);
 				spin_lock_irqsave(&musb->lock, flags);
-				musb->xceiv.gadget = NULL;
-				musb->xceiv.state = OTG_STATE_UNDEFINED;
+				otg_set_peripheral(musb->xceiv, NULL);
 				musb->gadget_driver = NULL;
 				musb->g.dev.driver = NULL;
 				spin_unlock_irqrestore(&musb->lock, flags);
@@ -1845,8 +1843,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 		(void) musb_gadget_vbus_draw(&musb->g, 0);
 
-		musb->xceiv.state = OTG_STATE_UNDEFINED;
+		musb->xceiv->state = OTG_STATE_UNDEFINED;
 		stop_activity(musb, driver);
+		otg_set_peripheral(musb->xceiv, NULL);
 
 		DBG(3, "unregistering driver %s\n", driver->function);
 		spin_unlock_irqrestore(&musb->lock, flags);
@@ -1882,7 +1881,7 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
 void musb_g_resume(struct musb *musb)
 {
 	musb->is_suspended = 0;
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_B_IDLE:
 		break;
 	case OTG_STATE_B_WAIT_ACON:
@@ -1908,10 +1907,10 @@ void musb_g_suspend(struct musb *musb)
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 	DBG(3, "devctl %02x\n", devctl);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_B_IDLE:
 		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
-			musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		break;
 	case OTG_STATE_B_PERIPHERAL:
 		musb->is_suspended = 1;
@@ -1957,22 +1956,24 @@ void musb_g_disconnect(struct musb *musb)
 		spin_lock(&musb->lock);
 	}
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	default:
 #ifdef	CONFIG_USB_MUSB_OTG
 		DBG(2, "Unhandled disconnect %s, setting a_idle\n",
 			otg_state_string(musb));
-		musb->xceiv.state = OTG_STATE_A_IDLE;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
 		break;
 	case OTG_STATE_A_PERIPHERAL:
-		musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+		MUSB_HST_MODE(musb);
 		break;
 	case OTG_STATE_B_WAIT_ACON:
 	case OTG_STATE_B_HOST:
 #endif
 	case OTG_STATE_B_PERIPHERAL:
 	case OTG_STATE_B_IDLE:
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		break;
 	case OTG_STATE_B_SRP_INIT:
 		break;
@@ -2028,10 +2029,10 @@ __acquires(musb->lock)
 	 * or else after HNP, as A-Device
 	 */
 	if (devctl & MUSB_DEVCTL_BDEVICE) {
-		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		musb->g.is_a_peripheral = 0;
 	} else if (is_otg_enabled(musb)) {
-		musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+		musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
 		musb->g.is_a_peripheral = 1;
 	} else
 		WARN_ON(1);
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 3f5e30ddfa2..40ed50ecedf 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -4,6 +4,7 @@
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -58,7 +59,8 @@
 static char *decode_ep0stage(u8 stage)
 {
 	switch (stage) {
-	case MUSB_EP0_STAGE_SETUP:	return "idle";
+	case MUSB_EP0_STAGE_IDLE:	return "idle";
+	case MUSB_EP0_STAGE_SETUP:	return "setup";
 	case MUSB_EP0_STAGE_TX:		return "in";
 	case MUSB_EP0_STAGE_RX:		return "out";
 	case MUSB_EP0_STAGE_ACKWAIT:	return "wait";
@@ -628,7 +630,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 		musb_writew(regs, MUSB_CSR0,
 				csr & ~MUSB_CSR0_P_SENTSTALL);
 		retval = IRQ_HANDLED;
-		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
 		csr = musb_readw(regs, MUSB_CSR0);
 	}
 
@@ -636,7 +638,18 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 	if (csr & MUSB_CSR0_P_SETUPEND) {
 		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
 		retval = IRQ_HANDLED;
-		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		/* Transition into the early status phase */
+		switch (musb->ep0_state) {
+		case MUSB_EP0_STAGE_TX:
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+			break;
+		case MUSB_EP0_STAGE_RX:
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			break;
+		default:
+			ERR("SetupEnd came in a wrong ep0stage %s",
+			    decode_ep0stage(musb->ep0_state));
+		}
 		csr = musb_readw(regs, MUSB_CSR0);
 		/* NOTE:  request may need completion */
 	}
@@ -697,11 +710,31 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 			if (req)
 				musb_g_ep0_giveback(musb, req);
 		}
+
+		/*
+		 * In case when several interrupts can get coalesced,
+		 * check to see if we've already received a SETUP packet...
+		 */
+		if (csr & MUSB_CSR0_RXPKTRDY)
+			goto setup;
+
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		break;
+
+	case MUSB_EP0_STAGE_IDLE:
+		/*
+		 * This state is typically (but not always) indiscernible
+		 * from the status states since the corresponding interrupts
+		 * tend to happen within too little period of time (with only
+		 * a zero-length packet in between) and so get coalesced...
+		 */
 		retval = IRQ_HANDLED;
 		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
 		/* FALLTHROUGH */
 
 	case MUSB_EP0_STAGE_SETUP:
+setup:
 		if (csr & MUSB_CSR0_RXPKTRDY) {
 			struct usb_ctrlrequest	setup;
 			int			handled = 0;
@@ -783,7 +816,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 stall:
 				DBG(3, "stall (%d)\n", handled);
 				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
-				musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+				musb->ep0_state = MUSB_EP0_STAGE_IDLE;
 finish:
 				musb_writew(regs, MUSB_CSR0,
 						musb->ackpend);
@@ -803,7 +836,7 @@ finish:
 		/* "can't happen" */
 		WARN_ON(1);
 		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
-		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
 		break;
 	}
 
@@ -959,7 +992,7 @@ static int musb_g_ep0_halt(struct usb_ep *e, int value)
 
 		csr |= MUSB_CSR0_P_SENDSTALL;
 		musb_writew(regs, MUSB_CSR0, csr);
-		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
 		musb->ackpend = 0;
 		break;
 	default:
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index db1b57415ec..94a2a350a41 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -181,6 +181,19 @@ static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
 	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
 }
 
+static void musb_ep_set_qh(struct musb_hw_ep *ep, int is_in, struct musb_qh *qh)
+{
+	if (is_in != 0 || ep->is_shared_fifo)
+		ep->in_qh  = qh;
+	if (is_in == 0 || ep->is_shared_fifo)
+		ep->out_qh = qh;
+}
+
+static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in)
+{
+	return is_in ? ep->in_qh : ep->out_qh;
+}
+
 /*
  * Start the URB at the front of an endpoint's queue
  * end must be claimed from the caller.
@@ -210,7 +223,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 	case USB_ENDPOINT_XFER_CONTROL:
 		/* control transfers always start with SETUP */
 		is_in = 0;
-		hw_ep->out_qh = qh;
 		musb->ep0_stage = MUSB_EP0_START;
 		buf = urb->setup_packet;
 		len = 8;
@@ -239,10 +251,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 			epnum, buf + offset, len);
 
 	/* Configure endpoint */
-	if (is_in || hw_ep->is_shared_fifo)
-		hw_ep->in_qh = qh;
-	else
-		hw_ep->out_qh = qh;
+	musb_ep_set_qh(hw_ep, is_in, qh);
 	musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
 
 	/* transmit may have more work: start it when it is time */
@@ -286,9 +295,8 @@ start:
 	}
 }
 
-/* caller owns controller lock, irqs are blocked */
-static void
-__musb_giveback(struct musb *musb, struct urb *urb, int status)
+/* Context: caller owns controller lock, IRQs are blocked */
+static void musb_giveback(struct musb *musb, struct urb *urb, int status)
 __releases(musb->lock)
 __acquires(musb->lock)
 {
@@ -321,60 +329,57 @@ __acquires(musb->lock)
 	spin_lock(&musb->lock);
 }
 
-/* for bulk/interrupt endpoints only */
-static inline void
-musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+/* For bulk/interrupt endpoints only */
+static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
+				    struct urb *urb)
 {
-	struct usb_device	*udev = urb->dev;
+	void __iomem		*epio = qh->hw_ep->regs;
 	u16			csr;
-	void __iomem		*epio = ep->regs;
-	struct musb_qh		*qh;
 
-	/* FIXME:  the current Mentor DMA code seems to have
+	/*
+	 * FIXME: the current Mentor DMA code seems to have
 	 * problems getting toggle correct.
 	 */
 
-	if (is_in || ep->is_shared_fifo)
-		qh = ep->in_qh;
+	if (is_in)
+		csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
 	else
-		qh = ep->out_qh;
+		csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
 
-	if (!is_in) {
-		csr = musb_readw(epio, MUSB_TXCSR);
-		usb_settoggle(udev, qh->epnum, 1,
-			(csr & MUSB_TXCSR_H_DATATOGGLE)
-				? 1 : 0);
-	} else {
-		csr = musb_readw(epio, MUSB_RXCSR);
-		usb_settoggle(udev, qh->epnum, 0,
-			(csr & MUSB_RXCSR_H_DATATOGGLE)
-				? 1 : 0);
-	}
+	usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
 }
 
-/* caller owns controller lock, irqs are blocked */
-static struct musb_qh *
-musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+/*
+ * Advance this hardware endpoint's queue, completing the specified URB and
+ * advancing to either the next URB queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, IRQs are blocked
+ */
+static void musb_advance_schedule(struct musb *musb, struct urb *urb,
+				  struct musb_hw_ep *hw_ep, int is_in)
 {
+	struct musb_qh		*qh = musb_ep_get_qh(hw_ep, is_in);
 	struct musb_hw_ep	*ep = qh->hw_ep;
-	struct musb		*musb = ep->musb;
-	int			is_in = usb_pipein(urb->pipe);
 	int			ready = qh->is_ready;
+	int			status;
+
+	status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
 
 	/* save toggle eagerly, for paranoia */
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_BULK:
 	case USB_ENDPOINT_XFER_INT:
-		musb_save_toggle(ep, is_in, urb);
+		musb_save_toggle(qh, is_in, urb);
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
-		if (status == 0 && urb->error_count)
+		if (urb->error_count)
 			status = -EXDEV;
 		break;
 	}
 
 	qh->is_ready = 0;
-	__musb_giveback(musb, urb, status);
+	musb_giveback(musb, urb, status);
 	qh->is_ready = ready;
 
 	/* reclaim resources (and bandwidth) ASAP; deschedule it, and
@@ -388,11 +393,8 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 		else
 			ep->tx_reinit = 1;
 
-		/* clobber old pointers to this qh */
-		if (is_in || ep->is_shared_fifo)
-			ep->in_qh = NULL;
-		else
-			ep->out_qh = NULL;
+		/* Clobber old pointers to this qh */
+		musb_ep_set_qh(ep, is_in, NULL);
 		qh->hep->hcpriv = NULL;
 
 		switch (qh->type) {
@@ -421,36 +423,10 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 			break;
 		}
 	}
-	return qh;
-}
-
-/*
- * Advance this hardware endpoint's queue, completing the specified urb and
- * advancing to either the next urb queued to that qh, or else invalidating
- * that qh and advancing to the next qh scheduled after the current one.
- *
- * Context: caller owns controller lock, irqs are blocked
- */
-static void
-musb_advance_schedule(struct musb *musb, struct urb *urb,
-		struct musb_hw_ep *hw_ep, int is_in)
-{
-	struct musb_qh	*qh;
-
-	if (is_in || hw_ep->is_shared_fifo)
-		qh = hw_ep->in_qh;
-	else
-		qh = hw_ep->out_qh;
-
-	if (urb->status == -EINPROGRESS)
-		qh = musb_giveback(qh, urb, 0);
-	else
-		qh = musb_giveback(qh, urb, urb->status);
 
 	if (qh != NULL && qh->is_ready) {
 		DBG(4, "... next ep%d %cX urb %p\n",
-				hw_ep->epnum, is_in ? 'R' : 'T',
-				next_urb(qh));
+		    hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
 		musb_start_urb(musb, is_in, qh);
 	}
 }
@@ -629,7 +605,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 	musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
 	musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
 	/* NOTE: bulk combining rewrites high bits of maxpacket */
-	musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+	musb_writew(ep->regs, MUSB_RXMAXP,
+			qh->maxpacket | ((qh->hb_mult - 1) << 11));
 
 	ep->rx_reinit = 0;
 }
@@ -651,9 +628,10 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
 	csr = musb_readw(epio, MUSB_TXCSR);
 	if (length > pkt_size) {
 		mode = 1;
-		csr |= MUSB_TXCSR_AUTOSET
-			| MUSB_TXCSR_DMAMODE
-			| MUSB_TXCSR_DMAENAB;
+		csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
+		/* autoset shouldn't be set in high bandwidth */
+		if (qh->hb_mult == 1)
+			csr |= MUSB_TXCSR_AUTOSET;
 	} else {
 		mode = 0;
 		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
@@ -703,15 +681,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 	void __iomem		*mbase = musb->mregs;
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
 	void __iomem		*epio = hw_ep->regs;
-	struct musb_qh		*qh;
-	u16			packet_sz;
-
-	if (!is_out || hw_ep->is_shared_fifo)
-		qh = hw_ep->in_qh;
-	else
-		qh = hw_ep->out_qh;
-
-	packet_sz = qh->maxpacket;
+	struct musb_qh		*qh = musb_ep_get_qh(hw_ep, !is_out);
+	u16			packet_sz = qh->maxpacket;
 
 	DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
 				"h_addr%02x h_port%02x bytes %d\n",
@@ -1129,17 +1100,14 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	u16			tx_csr;
 	size_t			length = 0;
 	size_t			offset = 0;
-	struct urb		*urb;
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
 	void __iomem		*epio = hw_ep->regs;
-	struct musb_qh		*qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
-							    : hw_ep->out_qh;
+	struct musb_qh		*qh = hw_ep->out_qh;
+	struct urb		*urb = next_urb(qh);
 	u32			status = 0;
 	void __iomem		*mbase = musb->mregs;
 	struct dma_channel	*dma;
 
-	urb = next_urb(qh);
-
 	musb_ep_select(mbase, epnum);
 	tx_csr = musb_readw(epio, MUSB_TXCSR);
 
@@ -1427,7 +1395,7 @@ static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep)
 			urb->actual_length += dma->actual_len;
 			dma->actual_len = 0L;
 		}
-		musb_save_toggle(ep, 1, urb);
+		musb_save_toggle(cur_qh, 1, urb);
 
 		/* move cur_qh to end of queue */
 		list_move_tail(&cur_qh->ring, &musb->in_bulk);
@@ -1531,6 +1499,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			/* packet error reported later */
 			iso_err = true;
 		}
+	} else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
+		DBG(3, "end %d high bandwidth incomplete ISO packet RX\n",
+				epnum);
+		status = -EPROTO;
 	}
 
 	/* faults abort the transfer */
@@ -1738,7 +1710,11 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 				val &= ~MUSB_RXCSR_H_AUTOREQ;
 			else
 				val |= MUSB_RXCSR_H_AUTOREQ;
-			val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+			val |= MUSB_RXCSR_DMAENAB;
+
+			/* autoclear shouldn't be set in high bandwidth */
+			if (qh->hb_mult == 1)
+				val |= MUSB_RXCSR_AUTOCLEAR;
 
 			musb_writew(epio, MUSB_RXCSR,
 				MUSB_RXCSR_H_WZC_BITS | val);
@@ -1817,19 +1793,17 @@ static int musb_schedule(
 			epnum++, hw_ep++) {
 		int	diff;
 
-		if (is_in || hw_ep->is_shared_fifo) {
-			if (hw_ep->in_qh  != NULL)
-				continue;
-		} else	if (hw_ep->out_qh != NULL)
+		if (musb_ep_get_qh(hw_ep, is_in) != NULL)
 			continue;
 
 		if (hw_ep == musb->bulk_ep)
 			continue;
 
 		if (is_in)
-			diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+			diff = hw_ep->max_packet_sz_rx;
 		else
-			diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+			diff = hw_ep->max_packet_sz_tx;
+		diff -= (qh->maxpacket * qh->hb_mult);
 
 		if (diff >= 0 && best_diff > diff) {
 			best_diff = diff;
@@ -1932,15 +1906,27 @@ static int musb_urb_enqueue(
 	qh->is_ready = 1;
 
 	qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+	qh->type = usb_endpoint_type(epd);
 
-	/* no high bandwidth support yet */
-	if (qh->maxpacket & ~0x7ff) {
-		ret = -EMSGSIZE;
-		goto done;
+	/* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
+	 * Some musb cores don't support high bandwidth ISO transfers; and
+	 * we don't (yet!) support high bandwidth interrupt transfers.
+	 */
+	qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
+	if (qh->hb_mult > 1) {
+		int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
+
+		if (ok)
+			ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx)
+				|| (usb_pipeout(urb->pipe) && musb->hb_iso_tx);
+		if (!ok) {
+			ret = -EMSGSIZE;
+			goto done;
+		}
+		qh->maxpacket &= 0x7ff;
 	}
 
 	qh->epnum = usb_endpoint_num(epd);
-	qh->type = usb_endpoint_type(epd);
 
 	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
 	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
@@ -2052,14 +2038,15 @@ done:
  * called with controller locked, irqs blocked
  * that hardware queue advances to the next transfer, unless prevented
  */
-static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
 {
 	struct musb_hw_ep	*ep = qh->hw_ep;
 	void __iomem		*epio = ep->regs;
 	unsigned		hw_end = ep->epnum;
 	void __iomem		*regs = ep->musb->mregs;
-	u16			csr;
+	int			is_in = usb_pipein(urb->pipe);
 	int			status = 0;
+	u16			csr;
 
 	musb_ep_select(regs, hw_end);
 
@@ -2112,14 +2099,14 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
 	struct musb		*musb = hcd_to_musb(hcd);
 	struct musb_qh		*qh;
-	struct list_head	*sched;
 	unsigned long		flags;
+	int			is_in  = usb_pipein(urb->pipe);
 	int			ret;
 
 	DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
 			usb_pipedevice(urb->pipe),
 			usb_pipeendpoint(urb->pipe),
-			usb_pipein(urb->pipe) ? "in" : "out");
+			is_in ? "in" : "out");
 
 	spin_lock_irqsave(&musb->lock, flags);
 	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
@@ -2130,47 +2117,25 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	if (!qh)
 		goto done;
 
-	/* Any URB not actively programmed into endpoint hardware can be
+	/*
+	 * Any URB not actively programmed into endpoint hardware can be
 	 * immediately given back; that's any URB not at the head of an
 	 * endpoint queue, unless someday we get real DMA queues.  And even
 	 * if it's at the head, it might not be known to the hardware...
 	 *
-	 * Otherwise abort current transfer, pending dma, etc.; urb->status
+	 * Otherwise abort current transfer, pending DMA, etc.; urb->status
 	 * has already been updated.  This is a synchronous abort; it'd be
 	 * OK to hold off until after some IRQ, though.
+	 *
+	 * NOTE: qh is invalid unless !list_empty(&hep->urb_list)
 	 */
-	if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
-		ret = -EINPROGRESS;
-	else {
-		switch (qh->type) {
-		case USB_ENDPOINT_XFER_CONTROL:
-			sched = &musb->control;
-			break;
-		case USB_ENDPOINT_XFER_BULK:
-			if (qh->mux == 1) {
-				if (usb_pipein(urb->pipe))
-					sched = &musb->in_bulk;
-				else
-					sched = &musb->out_bulk;
-				break;
-			}
-		default:
-			/* REVISIT when we get a schedule tree, periodic
-			 * transfers won't always be at the head of a
-			 * singleton queue...
-			 */
-			sched = NULL;
-			break;
-		}
-	}
-
-	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
-	if (ret < 0 || (sched && qh != first_qh(sched))) {
+	if (!qh->is_ready
+			|| urb->urb_list.prev != &qh->hep->urb_list
+			|| musb_ep_get_qh(qh->hw_ep, is_in) != qh) {
 		int	ready = qh->is_ready;
 
-		ret = 0;
 		qh->is_ready = 0;
-		__musb_giveback(musb, urb, 0);
+		musb_giveback(musb, urb, 0);
 		qh->is_ready = ready;
 
 		/* If nothing else (usually musb_giveback) is using it
@@ -2182,7 +2147,7 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			kfree(qh);
 		}
 	} else
-		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+		ret = musb_cleanup_urb(urb, qh);
 done:
 	spin_unlock_irqrestore(&musb->lock, flags);
 	return ret;
@@ -2192,13 +2157,11 @@ done:
 static void
 musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 {
-	u8			epnum = hep->desc.bEndpointAddress;
+	u8			is_in = hep->desc.bEndpointAddress & USB_DIR_IN;
 	unsigned long		flags;
 	struct musb		*musb = hcd_to_musb(hcd);
-	u8			is_in = epnum & USB_DIR_IN;
 	struct musb_qh		*qh;
 	struct urb		*urb;
-	struct list_head	*sched;
 
 	spin_lock_irqsave(&musb->lock, flags);
 
@@ -2206,31 +2169,11 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 	if (qh == NULL)
 		goto exit;
 
-	switch (qh->type) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		sched = &musb->control;
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		if (qh->mux == 1) {
-			if (is_in)
-				sched = &musb->in_bulk;
-			else
-				sched = &musb->out_bulk;
-			break;
-		}
-	default:
-		/* REVISIT when we get a schedule tree, periodic transfers
-		 * won't always be at the head of a singleton queue...
-		 */
-		sched = NULL;
-		break;
-	}
-
-	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+	/* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
 
-	/* kick first urb off the hardware, if needed */
+	/* Kick the first URB off the hardware, if needed */
 	qh->is_ready = 0;
-	if (!sched || qh == first_qh(sched)) {
+	if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
 		urb = next_urb(qh);
 
 		/* make software (then hardware) stop ASAP */
@@ -2238,7 +2181,7 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 			urb->status = -ESHUTDOWN;
 
 		/* cleanup */
-		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+		musb_cleanup_urb(urb, qh);
 
 		/* Then nuke all the others ... and advance the
 		 * queue on hw_ep (e.g. bulk ring) when we're done.
@@ -2254,7 +2197,7 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 		 * will activate any of these as it advances.
 		 */
 		while (!list_empty(&hep->urb_list))
-			__musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
+			musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
 
 		hep->hcpriv = NULL;
 		list_del(&qh->ring);
@@ -2293,7 +2236,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd)
 {
 	struct musb	*musb = hcd_to_musb(hcd);
 
-	if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+	if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
 		return 0;
 
 	if (is_host_active(musb) && musb->is_active) {
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 0b7fbcd2196..14b00776638 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -67,6 +67,7 @@ struct musb_qh {
 	u8			is_ready;	/* safe to modify hw_ep */
 	u8			type;		/* XFERTYPE_* */
 	u8			epnum;
+	u8			hb_mult;	/* high bandwidth pkts per uf */
 	u16			maxpacket;
 	u16			frame;		/* for periodic schedule */
 	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index bf677acc83d..bfe5fe4ebfe 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -78,18 +78,22 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
 		DBG(3, "Root port suspended, power %02x\n", power);
 
 		musb->port1_status |= USB_PORT_STAT_SUSPEND;
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_A_HOST:
-			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->xceiv->state = OTG_STATE_A_SUSPEND;
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.host->b_hnp_enable;
+					&& musb->xceiv->host->b_hnp_enable;
+			if (musb->is_active)
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(
+						OTG_TIME_A_AIDL_BDIS));
 			musb_platform_try_idle(musb, 0);
 			break;
 #ifdef	CONFIG_USB_MUSB_OTG
 		case OTG_STATE_B_HOST:
-			musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+			musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.host->b_hnp_enable;
+					&& musb->xceiv->host->b_hnp_enable;
 			musb_platform_try_idle(musb, 0);
 			break;
 #endif
@@ -116,7 +120,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 	void __iomem	*mbase = musb->mregs;
 
 #ifdef CONFIG_USB_MUSB_OTG
-	if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+	if (musb->xceiv->state == OTG_STATE_B_IDLE) {
 		DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
 		musb->port1_status &= ~USB_PORT_STAT_RESET;
 		return;
@@ -186,14 +190,23 @@ void musb_root_disconnect(struct musb *musb)
 	usb_hcd_poll_rh_status(musb_to_hcd(musb));
 	musb->is_active = 0;
 
-	switch (musb->xceiv.state) {
-	case OTG_STATE_A_HOST:
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_SUSPEND:
-		musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#ifdef	CONFIG_USB_MUSB_OTG
+		if (is_otg_enabled(musb)
+				&& musb->xceiv->host->b_hnp_enable) {
+			musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+			musb->g.is_a_peripheral = 1;
+			break;
+		}
+#endif
+		/* FALLTHROUGH */
+	case OTG_STATE_A_HOST:
+		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 		musb->is_active = 0;
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		break;
 	default:
 		DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
@@ -332,7 +345,7 @@ int musb_hub_control(
 			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
 			usb_hcd_poll_rh_status(musb_to_hcd(musb));
 			/* NOTE: it might really be A_WAIT_BCON ... */
-			musb->xceiv.state = OTG_STATE_A_HOST;
+			musb->xceiv->state = OTG_STATE_A_HOST;
 		}
 
 		put_unaligned(cpu_to_le32(musb->port1_status
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 60924ce0849..34875201ee0 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -44,7 +44,6 @@
 #define	get_cpu_rev()	2
 #endif
 
-#define MUSB_TIMEOUT_A_WAIT_BCON	1100
 
 static struct timer_list musb_idle_timer;
 
@@ -61,17 +60,17 @@ static void musb_do_idle(unsigned long _musb)
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
 		devctl &= ~MUSB_DEVCTL_SESSION;
 		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE) {
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
 		} else {
-			musb->xceiv.state = OTG_STATE_A_IDLE;
+			musb->xceiv->state = OTG_STATE_A_IDLE;
 			MUSB_HST_MODE(musb);
 		}
 		break;
@@ -89,7 +88,7 @@ static void musb_do_idle(unsigned long _musb)
 			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
 			usb_hcd_poll_rh_status(musb_to_hcd(musb));
 			/* NOTE: it might really be A_WAIT_BCON ... */
-			musb->xceiv.state = OTG_STATE_A_HOST;
+			musb->xceiv->state = OTG_STATE_A_HOST;
 		}
 		break;
 #endif
@@ -97,9 +96,9 @@ static void musb_do_idle(unsigned long _musb)
 	case OTG_STATE_A_HOST:
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl &  MUSB_DEVCTL_BDEVICE)
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 		else
-			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 #endif
 	default:
 		break;
@@ -118,7 +117,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 
 	/* Never idle if active, or when VBUS timeout is not set as host */
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
-			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
@@ -163,8 +162,8 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 
 	if (is_on) {
 		musb->is_active = 1;
-		musb->xceiv.default_a = 1;
-		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->default_a = 1;
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		devctl |= MUSB_DEVCTL_SESSION;
 
 		MUSB_HST_MODE(musb);
@@ -175,8 +174,8 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 		 * jumping right to B_IDLE...
 		 */
 
-		musb->xceiv.default_a = 0;
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->default_a = 0;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		devctl &= ~MUSB_DEVCTL_SESSION;
 
 		MUSB_DEV_MODE(musb);
@@ -188,10 +187,6 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 		otg_state_string(musb),
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
-static int omap_set_power(struct otg_transceiver *x, unsigned mA)
-{
-	return 0;
-}
 
 static int musb_platform_resume(struct musb *musb);
 
@@ -202,24 +197,6 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	devctl |= MUSB_DEVCTL_SESSION;
 	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
-	switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	case MUSB_HOST:
-		otg_set_host(&musb->xceiv, musb->xceiv.host);
-		break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-	case MUSB_PERIPHERAL:
-		otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
-		break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
-	case MUSB_OTG:
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
 	return 0;
 }
 
@@ -231,6 +208,16 @@ int __init musb_platform_init(struct musb *musb)
 	omap_cfg_reg(AE5_2430_USB0HS_STP);
 #endif
 
+	/* We require some kind of external transceiver, hooked
+	 * up through ULPI.  TWL4030-family PMICs include one,
+	 * which needs a driver, drivers aren't always needed.
+	 */
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv) {
+		pr_err("HS USB OTG: no transceiver configured\n");
+		return -ENODEV;
+	}
+
 	musb_platform_resume(musb);
 
 	l = omap_readl(OTG_SYSCONFIG);
@@ -240,7 +227,12 @@ int __init musb_platform_init(struct musb *musb)
 	l &= ~AUTOIDLE;		/* disable auto idle */
 	l &= ~NOIDLE;		/* remove possible noidle */
 	l |= SMARTIDLE;		/* enable smart idle */
-	l |= AUTOIDLE;		/* enable auto idle */
+	/*
+	 * MUSB AUTOIDLE don't work in 3430.
+	 * Workaround by Richard Woodruff/TI
+	 */
+	if (!cpu_is_omap3430())
+		l |= AUTOIDLE;		/* enable auto idle */
 	omap_writel(l, OTG_SYSCONFIG);
 
 	l = omap_readl(OTG_INTERFSEL);
@@ -257,9 +249,6 @@ int __init musb_platform_init(struct musb *musb)
 
 	if (is_host_enabled(musb))
 		musb->board_set_vbus = omap_set_vbus;
-	if (is_peripheral_enabled(musb))
-		musb->xceiv.set_power = omap_set_power;
-	musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
@@ -282,8 +271,7 @@ int musb_platform_suspend(struct musb *musb)
 	l |= ENABLEWAKEUP;	/* enable wakeup */
 	omap_writel(l, OTG_SYSCONFIG);
 
-	if (musb->xceiv.set_suspend)
-		musb->xceiv.set_suspend(&musb->xceiv, 1);
+	otg_set_suspend(musb->xceiv, 1);
 
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 0);
@@ -300,8 +288,7 @@ static int musb_platform_resume(struct musb *musb)
 	if (!musb->clock)
 		return 0;
 
-	if (musb->xceiv.set_suspend)
-		musb->xceiv.set_suspend(&musb->xceiv, 0);
+	otg_set_suspend(musb->xceiv, 0);
 
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 1);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 4ac1477d356..88b587c703e 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -259,6 +259,8 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
 		tusb_fifo_read_unaligned(fifo, buf, len);
 }
 
+static struct musb *the_musb;
+
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 
 /* This is used by gadget drivers, and OTG transceiver logic, allowing
@@ -269,7 +271,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
  */
 static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
 {
-	struct musb	*musb = container_of(x, struct musb, xceiv);
+	struct musb	*musb = the_musb;
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		reg;
 
@@ -419,7 +421,7 @@ static void musb_do_idle(unsigned long _musb)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	switch (musb->xceiv.state) {
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
 		if ((musb->a_wait_bcon != 0)
 			&& (musb->idle_timeout == 0
@@ -483,7 +485,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 
 	/* Never idle if active, or when VBUS timeout is not set as host */
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
-			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
@@ -532,8 +534,8 @@ static void tusb_source_power(struct musb *musb, int is_on)
 		if (musb->set_clock)
 			musb->set_clock(musb->clock, 1);
 		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
-		musb->xceiv.default_a = 1;
-		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->default_a = 1;
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		devctl |= MUSB_DEVCTL_SESSION;
 
 		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
@@ -546,24 +548,24 @@ static void tusb_source_power(struct musb *musb, int is_on)
 		/* If ID pin is grounded, we want to be a_idle */
 		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
 		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 			case OTG_STATE_A_WAIT_VRISE:
 			case OTG_STATE_A_WAIT_BCON:
-				musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+				musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 				break;
 			case OTG_STATE_A_WAIT_VFALL:
-				musb->xceiv.state = OTG_STATE_A_IDLE;
+				musb->xceiv->state = OTG_STATE_A_IDLE;
 				break;
 			default:
-				musb->xceiv.state = OTG_STATE_A_IDLE;
+				musb->xceiv->state = OTG_STATE_A_IDLE;
 			}
 			musb->is_active = 0;
-			musb->xceiv.default_a = 1;
+			musb->xceiv->default_a = 1;
 			MUSB_HST_MODE(musb);
 		} else {
 			musb->is_active = 0;
-			musb->xceiv.default_a = 0;
-			musb->xceiv.state = OTG_STATE_B_IDLE;
+			musb->xceiv->default_a = 0;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
 		}
 
@@ -674,7 +676,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 		else
 			default_a = is_host_enabled(musb);
 		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
-		musb->xceiv.default_a = default_a;
+		musb->xceiv->default_a = default_a;
 		tusb_source_power(musb, default_a);
 
 		/* Don't allow idling immediately */
@@ -686,7 +688,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 	if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
 
 		/* B-dev state machine:  no vbus ~= disconnect */
-		if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+		if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
 				|| !is_host_enabled(musb)) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 			/* ? musb_root_disconnect(musb); */
@@ -701,9 +703,9 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 
 			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
 				DBG(1, "Forcing disconnect (no interrupt)\n");
-				if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+				if (musb->xceiv->state != OTG_STATE_B_IDLE) {
 					/* INTR_DISCONNECT can hide... */
-					musb->xceiv.state = OTG_STATE_B_IDLE;
+					musb->xceiv->state = OTG_STATE_B_IDLE;
 					musb->int_usb |= MUSB_INTR_DISCONNECT;
 				}
 				musb->is_active = 0;
@@ -717,7 +719,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			DBG(2, "vbus change, %s, otg %03x\n",
 				otg_state_string(musb), otg_stat);
 
-			switch (musb->xceiv.state) {
+			switch (musb->xceiv->state) {
 			case OTG_STATE_A_IDLE:
 				DBG(2, "Got SRP, turning on VBUS\n");
 				musb_set_vbus(musb, 1);
@@ -765,7 +767,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 
 		DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
 
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_A_WAIT_VRISE:
 			/* VBUS has probably been valid for a while now,
 			 * but may well have bounced out of range a bit
@@ -777,7 +779,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 					DBG(2, "devctl %02x\n", devctl);
 					break;
 				}
-				musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+				musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 				musb->is_active = 0;
 				idle_timeout = jiffies
 					+ msecs_to_jiffies(musb->a_wait_bcon);
@@ -1093,9 +1095,14 @@ int __init musb_platform_init(struct musb *musb)
 {
 	struct platform_device	*pdev;
 	struct resource		*mem;
-	void __iomem		*sync;
+	void __iomem		*sync = NULL;
 	int			ret;
 
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv)
+		return -ENODEV;
+
 	pdev = to_platform_device(musb->controller);
 
 	/* dma address for async dma */
@@ -1106,14 +1113,16 @@ int __init musb_platform_init(struct musb *musb)
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!mem) {
 		pr_debug("no sync dma resource?\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto done;
 	}
 	musb->sync = mem->start;
 
 	sync = ioremap(mem->start, mem->end - mem->start + 1);
 	if (!sync) {
 		pr_debug("ioremap for sync failed\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto done;
 	}
 	musb->sync_va = sync;
 
@@ -1126,28 +1135,37 @@ int __init musb_platform_init(struct musb *musb)
 	if (ret) {
 		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
 				ret);
-		return -ENODEV;
+		goto done;
 	}
 	musb->isr = tusb_interrupt;
 
 	if (is_host_enabled(musb))
 		musb->board_set_vbus = tusb_source_power;
-	if (is_peripheral_enabled(musb))
-		musb->xceiv.set_power = tusb_draw_power;
+	if (is_peripheral_enabled(musb)) {
+		musb->xceiv->set_power = tusb_draw_power;
+		the_musb = musb;
+	}
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
+done:
+	if (ret < 0) {
+		if (sync)
+			iounmap(sync);
+		usb_nop_xceiv_unregister();
+	}
 	return ret;
 }
 
 int musb_platform_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
+	the_musb = NULL;
 
 	if (musb->board_set_power)
 		musb->board_set_power(0);
 
 	iounmap(musb->sync_va);
-
+	usb_nop_xceiv_unregister();
 	return 0;
 }
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index aa884d072f0..69feeec1628 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,4 +59,18 @@ config NOP_USB_XCEIV
 	 built-in with usb ip or which are autonomous and doesn't require any
 	 phy programming such as ISP1x04 etc.
 
+config USB_LANGWELL_OTG
+	tristate "Intel Langwell USB OTG dual-role support"
+	depends on USB && MRST
+	select USB_OTG
+	select USB_OTG_UTILS
+	help
+	  Say Y here if you want to build Intel Langwell USB OTG
+	  transciever driver in kernel. This driver implements role
+	  switch between EHCI host driver and Langwell USB OTG
+	  client driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called langwell_otg.
+
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 20816785652..6d1abdd3c0a 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
+obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 
 ccflags-$(CONFIG_USB_DEBUG)	+= -DDEBUG
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
new file mode 100644
index 00000000000..6f628d0e9f3
--- /dev/null
+++ b/drivers/usb/otg/langwell_otg.c
@@ -0,0 +1,1915 @@
+/*
+ * Intel Langwell USB OTG transceiver driver
+ * Copyright (C) 2008 - 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+/* This driver helps to switch Langwell OTG controller function between host
+ * and peripheral. It works with EHCI driver and Langwell client controller
+ * driver together.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+#include <asm/ipc_defs.h>
+#include <linux/delay.h>
+#include "../core/hcd.h"
+
+#include <linux/usb/langwell_otg.h>
+
+#define	DRIVER_DESC		"Intel Langwell USB OTG transceiver driver"
+#define	DRIVER_VERSION		"3.0.0.32L.0002"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "langwell_otg";
+
+static int langwell_otg_probe(struct pci_dev *pdev,
+			const struct pci_device_id *id);
+static void langwell_otg_remove(struct pci_dev *pdev);
+static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
+static int langwell_otg_resume(struct pci_dev *pdev);
+
+static int langwell_otg_set_host(struct otg_transceiver *otg,
+				struct usb_bus *host);
+static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
+				struct usb_gadget *gadget);
+static int langwell_otg_start_srp(struct otg_transceiver *otg);
+
+static const struct pci_device_id pci_ids[] = {{
+	.class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+	.class_mask =   ~0,
+	.vendor =	0x8086,
+	.device =	0x0811,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+}, { /* end: all zeroes */ }
+};
+
+static struct pci_driver otg_pci_driver = {
+	.name =		(char *) driver_name,
+	.id_table =	pci_ids,
+
+	.probe =	langwell_otg_probe,
+	.remove =	langwell_otg_remove,
+
+	.suspend =	langwell_otg_suspend,
+	.resume =	langwell_otg_resume,
+};
+
+static const char *state_string(enum usb_otg_state state)
+{
+	switch (state) {
+	case OTG_STATE_A_IDLE:
+		return "a_idle";
+	case OTG_STATE_A_WAIT_VRISE:
+		return "a_wait_vrise";
+	case OTG_STATE_A_WAIT_BCON:
+		return "a_wait_bcon";
+	case OTG_STATE_A_HOST:
+		return "a_host";
+	case OTG_STATE_A_SUSPEND:
+		return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:
+		return "a_peripheral";
+	case OTG_STATE_A_WAIT_VFALL:
+		return "a_wait_vfall";
+	case OTG_STATE_A_VBUS_ERR:
+		return "a_vbus_err";
+	case OTG_STATE_B_IDLE:
+		return "b_idle";
+	case OTG_STATE_B_SRP_INIT:
+		return "b_srp_init";
+	case OTG_STATE_B_PERIPHERAL:
+		return "b_peripheral";
+	case OTG_STATE_B_WAIT_ACON:
+		return "b_wait_acon";
+	case OTG_STATE_B_HOST:
+		return "b_host";
+	default:
+		return "UNDEFINED";
+	}
+}
+
+/* HSM timers */
+static inline struct langwell_otg_timer *otg_timer_initializer
+(void (*function)(unsigned long), unsigned long expires, unsigned long data)
+{
+	struct langwell_otg_timer *timer;
+	timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
+	timer->function = function;
+	timer->expires = expires;
+	timer->data = data;
+	return timer;
+}
+
+static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
+	*a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
+	*b_bus_suspend_tmr;
+
+static struct list_head active_timers;
+
+static struct langwell_otg *the_transceiver;
+
+/* host/client notify transceiver when event affects HNP state */
+void langwell_update_transceiver()
+{
+	otg_dbg("transceiver driver is notified\n");
+	queue_work(the_transceiver->qwork, &the_transceiver->work);
+}
+EXPORT_SYMBOL(langwell_update_transceiver);
+
+static int langwell_otg_set_host(struct otg_transceiver *otg,
+					struct usb_bus *host)
+{
+	otg->host = host;
+
+	return 0;
+}
+
+static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
+					struct usb_gadget *gadget)
+{
+	otg->gadget = gadget;
+
+	return 0;
+}
+
+static int langwell_otg_set_power(struct otg_transceiver *otg,
+				unsigned mA)
+{
+	return 0;
+}
+
+/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
+static void langwell_otg_drv_vbus(int on)
+{
+	struct ipc_pmic_reg_data	pmic_data = {0};
+	struct ipc_pmic_reg_data	battery_data;
+
+	/* Check if battery is attached or not */
+	battery_data.pmic_reg_data[0].register_address = 0xd2;
+	battery_data.ioc = 0;
+	battery_data.num_entries = 1;
+	if (ipc_pmic_register_read(&battery_data)) {
+		otg_dbg("Failed to read PMIC register 0xd2.\n");
+		return;
+	}
+
+	if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
+		otg_dbg("no battery attached\n");
+		return;
+	}
+
+	/* Workaround for battery attachment issue */
+	if (battery_data.pmic_reg_data[0].value == 0x34) {
+		otg_dbg("battery \n");
+		return;
+	}
+
+	otg_dbg("battery attached\n");
+
+	pmic_data.ioc = 0;
+	pmic_data.pmic_reg_data[0].register_address = 0xD4;
+	pmic_data.num_entries = 1;
+	if (on)
+		pmic_data.pmic_reg_data[0].value = 0x20;
+	else
+		pmic_data.pmic_reg_data[0].value = 0xc0;
+
+	if (ipc_pmic_register_write(&pmic_data, TRUE))
+		otg_dbg("Failed to write PMIC.\n");
+
+}
+
+/* charge vbus or discharge vbus through a resistor to ground */
+static void langwell_otg_chrg_vbus(int on)
+{
+
+	u32	val;
+
+	val = readl(the_transceiver->regs + CI_OTGSC);
+
+	if (on)
+		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
+				the_transceiver->regs + CI_OTGSC);
+	else
+		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
+				the_transceiver->regs + CI_OTGSC);
+
+}
+
+/* Start SRP */
+static int langwell_otg_start_srp(struct otg_transceiver *otg)
+{
+	u32	val;
+
+	otg_dbg("Start SRP ->\n");
+
+	val = readl(the_transceiver->regs + CI_OTGSC);
+
+	writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
+		the_transceiver->regs + CI_OTGSC);
+
+	/* Check if the data plus is finished or not */
+	msleep(8);
+	val = readl(the_transceiver->regs + CI_OTGSC);
+	if (val & (OTGSC_HADP | OTGSC_DP))
+		otg_dbg("DataLine SRP Error\n");
+
+	/* FIXME: VBus SRP */
+
+	return 0;
+}
+
+
+/* stop SOF via bus_suspend */
+static void langwell_otg_loc_sof(int on)
+{
+	struct usb_hcd	*hcd;
+	int		err;
+
+	otg_dbg("loc_sof -> %d\n", on);
+
+	hcd = bus_to_hcd(the_transceiver->otg.host);
+	if (on)
+		err = hcd->driver->bus_resume(hcd);
+	else
+		err = hcd->driver->bus_suspend(hcd);
+
+	if (err)
+		otg_dbg("Failed to resume/suspend bus - %d\n", err);
+}
+
+static void langwell_otg_phy_low_power(int on)
+{
+	u32	val;
+
+	otg_dbg("phy low power mode-> %d\n", on);
+
+	val = readl(the_transceiver->regs + CI_HOSTPC1);
+	if (on)
+		writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
+	else
+		writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
+}
+
+/* Enable/Disable OTG interrupt */
+static void langwell_otg_intr(int on)
+{
+	u32 val;
+
+	otg_dbg("interrupt -> %d\n", on);
+
+	val = readl(the_transceiver->regs + CI_OTGSC);
+	if (on) {
+		val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
+		writel(val, the_transceiver->regs + CI_OTGSC);
+	} else {
+		val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
+		writel(val, the_transceiver->regs + CI_OTGSC);
+	}
+}
+
+/* set HAAR: Hardware Assist Auto-Reset */
+static void langwell_otg_HAAR(int on)
+{
+	u32	val;
+
+	otg_dbg("HAAR -> %d\n", on);
+
+	val = readl(the_transceiver->regs + CI_OTGSC);
+	if (on)
+		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
+				the_transceiver->regs + CI_OTGSC);
+	else
+		writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
+				the_transceiver->regs + CI_OTGSC);
+}
+
+/* set HABA: Hardware Assist B-Disconnect to A-Connect */
+static void langwell_otg_HABA(int on)
+{
+	u32	val;
+
+	otg_dbg("HABA -> %d\n", on);
+
+	val = readl(the_transceiver->regs + CI_OTGSC);
+	if (on)
+		writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
+				the_transceiver->regs + CI_OTGSC);
+	else
+		writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
+				the_transceiver->regs + CI_OTGSC);
+}
+
+static int langwell_otg_check_se0_srp(int on)
+{
+	u32 val;
+
+	int delay_time = TB_SE0_SRP * 10; /* step is 100us */
+
+	otg_dbg("check_se0_srp -> \n");
+
+	do {
+		udelay(100);
+		if (!delay_time--)
+			break;
+		val = readl(the_transceiver->regs + CI_PORTSC1);
+		val &= PORTSC_LS;
+	} while (!val);
+
+	otg_dbg("check_se0_srp <- \n");
+	return val;
+}
+
+/* The timeout callback function to set time out bit */
+static void set_tmout(unsigned long indicator)
+{
+	*(int *)indicator = 1;
+}
+
+void langwell_otg_nsf_msg(unsigned long indicator)
+{
+	switch (indicator) {
+	case 2:
+	case 4:
+	case 6:
+	case 7:
+		printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
+				indicator);
+		break;
+	case 3:
+		printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
+				indicator);
+		break;
+	default:
+		printk(KERN_ERR "Do not have this kind of NSF\n");
+		break;
+	}
+}
+
+/* Initialize timers */
+static void langwell_otg_init_timers(struct otg_hsm *hsm)
+{
+	/* HSM used timers */
+	a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
+				(unsigned long)&hsm->a_wait_vrise_tmout);
+	a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
+				(unsigned long)&hsm->a_wait_bcon_tmout);
+	a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
+				(unsigned long)&hsm->a_aidl_bdis_tmout);
+	b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
+				(unsigned long)&hsm->b_ase0_brst_tmout);
+	b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
+				(unsigned long)&hsm->b_se0_srp);
+	b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
+				(unsigned long)&hsm->b_srp_res_tmout);
+	b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
+				(unsigned long)&hsm->b_bus_suspend_tmout);
+}
+
+/* Free timers */
+static void langwell_otg_free_timers(void)
+{
+	kfree(a_wait_vrise_tmr);
+	kfree(a_wait_bcon_tmr);
+	kfree(a_aidl_bdis_tmr);
+	kfree(b_ase0_brst_tmr);
+	kfree(b_se0_srp_tmr);
+	kfree(b_srp_res_tmr);
+	kfree(b_bus_suspend_tmr);
+}
+
+/* Add timer to timer list */
+static void langwell_otg_add_timer(void *gtimer)
+{
+	struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
+	struct langwell_otg_timer *tmp_timer;
+	u32	val32;
+
+	/* Check if the timer is already in the active list,
+	 * if so update timer count
+	 */
+	list_for_each_entry(tmp_timer, &active_timers, list)
+		if (tmp_timer == timer) {
+			timer->count = timer->expires;
+			return;
+		}
+	timer->count = timer->expires;
+
+	if (list_empty(&active_timers)) {
+		val32 = readl(the_transceiver->regs + CI_OTGSC);
+		writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
+	}
+
+	list_add_tail(&timer->list, &active_timers);
+}
+
+/* Remove timer from the timer list; clear timeout status */
+static void langwell_otg_del_timer(void *gtimer)
+{
+	struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
+	struct langwell_otg_timer *tmp_timer, *del_tmp;
+	u32 val32;
+
+	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
+		if (tmp_timer == timer)
+			list_del(&timer->list);
+
+	if (list_empty(&active_timers)) {
+		val32 = readl(the_transceiver->regs + CI_OTGSC);
+		writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
+	}
+}
+
+/* Reduce timer count by 1, and find timeout conditions.*/
+static int langwell_otg_tick_timer(u32 *int_sts)
+{
+	struct langwell_otg_timer *tmp_timer, *del_tmp;
+	int expired = 0;
+
+	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
+		tmp_timer->count--;
+		/* check if timer expires */
+		if (!tmp_timer->count) {
+			list_del(&tmp_timer->list);
+			tmp_timer->function(tmp_timer->data);
+			expired = 1;
+		}
+	}
+
+	if (list_empty(&active_timers)) {
+		otg_dbg("tick timer: disable 1ms int\n");
+		*int_sts = *int_sts & ~OTGSC_1MSE;
+	}
+	return expired;
+}
+
+static void reset_otg(void)
+{
+	u32	val;
+	int	delay_time = 1000;
+
+	otg_dbg("reseting OTG controller ...\n");
+	val = readl(the_transceiver->regs + CI_USBCMD);
+	writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
+	do {
+		udelay(100);
+		if (!delay_time--)
+			otg_dbg("reset timeout\n");
+		val = readl(the_transceiver->regs + CI_USBCMD);
+		val &= USBCMD_RST;
+	} while (val != 0);
+	otg_dbg("reset done.\n");
+}
+
+static void set_host_mode(void)
+{
+	u32 	val;
+
+	reset_otg();
+	val = readl(the_transceiver->regs + CI_USBMODE);
+	val = (val & (~USBMODE_CM)) | USBMODE_HOST;
+	writel(val, the_transceiver->regs + CI_USBMODE);
+}
+
+static void set_client_mode(void)
+{
+	u32 	val;
+
+	reset_otg();
+	val = readl(the_transceiver->regs + CI_USBMODE);
+	val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
+	writel(val, the_transceiver->regs + CI_USBMODE);
+}
+
+static void init_hsm(void)
+{
+	struct langwell_otg	*langwell = the_transceiver;
+	u32			val32;
+
+	/* read OTGSC after reset */
+	val32 = readl(langwell->regs + CI_OTGSC);
+	otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
+
+	/* set init state */
+	if (val32 & OTGSC_ID) {
+		langwell->hsm.id = 1;
+		langwell->otg.default_a = 0;
+		set_client_mode();
+		langwell->otg.state = OTG_STATE_B_IDLE;
+		langwell_otg_drv_vbus(0);
+	} else {
+		langwell->hsm.id = 0;
+		langwell->otg.default_a = 1;
+		set_host_mode();
+		langwell->otg.state = OTG_STATE_A_IDLE;
+	}
+
+	/* set session indicator */
+	if (val32 & OTGSC_BSE)
+		langwell->hsm.b_sess_end = 1;
+	if (val32 & OTGSC_BSV)
+		langwell->hsm.b_sess_vld = 1;
+	if (val32 & OTGSC_ASV)
+		langwell->hsm.a_sess_vld = 1;
+	if (val32 & OTGSC_AVV)
+		langwell->hsm.a_vbus_vld = 1;
+
+	/* defautly power the bus */
+	langwell->hsm.a_bus_req = 1;
+	langwell->hsm.a_bus_drop = 0;
+	/* defautly don't request bus as B device */
+	langwell->hsm.b_bus_req = 0;
+	/* no system error */
+	langwell->hsm.a_clr_err = 0;
+}
+
+static irqreturn_t otg_dummy_irq(int irq, void *_dev)
+{
+	void __iomem	*reg_base = _dev;
+	u32	val;
+	u32	int_mask = 0;
+
+	val = readl(reg_base + CI_USBMODE);
+	if ((val & USBMODE_CM) != USBMODE_DEVICE)
+		return IRQ_NONE;
+
+	val = readl(reg_base + CI_USBSTS);
+	int_mask = val & INTR_DUMMY_MASK;
+
+	if (int_mask == 0)
+		return IRQ_NONE;
+
+	/* clear hsm.b_conn here since host driver can't detect it
+	*  otg_dummy_irq called means B-disconnect happened.
+	*/
+	if (the_transceiver->hsm.b_conn) {
+		the_transceiver->hsm.b_conn = 0;
+		if (spin_trylock(&the_transceiver->wq_lock)) {
+			queue_work(the_transceiver->qwork,
+				&the_transceiver->work);
+			spin_unlock(&the_transceiver->wq_lock);
+		}
+	}
+	/* Clear interrupts */
+	writel(int_mask, reg_base + CI_USBSTS);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t otg_irq(int irq, void *_dev)
+{
+	struct	langwell_otg *langwell = _dev;
+	u32	int_sts, int_en;
+	u32	int_mask = 0;
+	int	flag = 0;
+
+	int_sts = readl(langwell->regs + CI_OTGSC);
+	int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
+	int_mask = int_sts & int_en;
+	if (int_mask == 0)
+		return IRQ_NONE;
+
+	if (int_mask & OTGSC_IDIS) {
+		otg_dbg("%s: id change int\n", __func__);
+		langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
+		flag = 1;
+	}
+	if (int_mask & OTGSC_DPIS) {
+		otg_dbg("%s: data pulse int\n", __func__);
+		langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
+		flag = 1;
+	}
+	if (int_mask & OTGSC_BSEIS) {
+		otg_dbg("%s: b session end int\n", __func__);
+		langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
+		flag = 1;
+	}
+	if (int_mask & OTGSC_BSVIS) {
+		otg_dbg("%s: b session valid int\n", __func__);
+		langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
+		flag = 1;
+	}
+	if (int_mask & OTGSC_ASVIS) {
+		otg_dbg("%s: a session valid int\n", __func__);
+		langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
+		flag = 1;
+	}
+	if (int_mask & OTGSC_AVVIS) {
+		otg_dbg("%s: a vbus valid int\n", __func__);
+		langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
+		flag = 1;
+	}
+
+	if (int_mask & OTGSC_1MSS) {
+		/* need to schedule otg_work if any timer is expired */
+		if (langwell_otg_tick_timer(&int_sts))
+			flag = 1;
+	}
+
+	writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
+			langwell->regs + CI_OTGSC);
+	if (flag)
+		queue_work(langwell->qwork, &langwell->work);
+
+	return IRQ_HANDLED;
+}
+
+static void langwell_otg_work(struct work_struct *work)
+{
+	struct langwell_otg *langwell = container_of(work,
+					struct langwell_otg, work);
+	int	retval;
+
+	otg_dbg("%s: old state = %s\n", __func__,
+			state_string(langwell->otg.state));
+
+	switch (langwell->otg.state) {
+	case OTG_STATE_UNDEFINED:
+	case OTG_STATE_B_IDLE:
+		if (!langwell->hsm.id) {
+			langwell_otg_del_timer(b_srp_res_tmr);
+			langwell->otg.default_a = 1;
+			langwell->hsm.a_srp_det = 0;
+
+			langwell_otg_chrg_vbus(0);
+			langwell_otg_drv_vbus(0);
+
+			set_host_mode();
+			langwell->otg.state = OTG_STATE_A_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (langwell->hsm.b_srp_res_tmout) {
+			langwell->hsm.b_srp_res_tmout = 0;
+			langwell->hsm.b_bus_req = 0;
+			langwell_otg_nsf_msg(6);
+		} else if (langwell->hsm.b_sess_vld) {
+			langwell_otg_del_timer(b_srp_res_tmr);
+			langwell->hsm.b_sess_end = 0;
+			langwell->hsm.a_bus_suspend = 0;
+
+			langwell_otg_chrg_vbus(0);
+			if (langwell->client_ops) {
+				langwell->client_ops->resume(langwell->pdev);
+				langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+			} else
+				otg_dbg("client driver not loaded.\n");
+
+		} else if (langwell->hsm.b_bus_req &&
+				(langwell->hsm.b_sess_end)) {
+			/* workaround for b_se0_srp detection */
+			retval = langwell_otg_check_se0_srp(0);
+			if (retval) {
+				langwell->hsm.b_bus_req = 0;
+				otg_dbg("LS is not SE0, try again later\n");
+			} else {
+				/* Start SRP */
+				langwell_otg_start_srp(&langwell->otg);
+				langwell_otg_add_timer(b_srp_res_tmr);
+			}
+		}
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		if (!langwell->hsm.id) {
+			langwell->otg.default_a = 1;
+			langwell->hsm.a_srp_det = 0;
+
+			langwell_otg_drv_vbus(0);
+			langwell_otg_chrg_vbus(0);
+
+			langwell->otg.state = OTG_STATE_A_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (langwell->hsm.b_sess_vld) {
+			langwell_otg_chrg_vbus(0);
+			if (langwell->client_ops) {
+				langwell->client_ops->resume(langwell->pdev);
+				langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+			} else
+				otg_dbg("client driver not loaded.\n");
+		}
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (!langwell->hsm.id) {
+			langwell->otg.default_a = 1;
+			langwell->hsm.a_srp_det = 0;
+
+			langwell_otg_drv_vbus(0);
+			langwell_otg_chrg_vbus(0);
+			set_host_mode();
+
+			if (langwell->client_ops) {
+				langwell->client_ops->suspend(langwell->pdev,
+					PMSG_FREEZE);
+			} else
+				otg_dbg("client driver has been removed.\n");
+
+			langwell->otg.state = OTG_STATE_A_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (!langwell->hsm.b_sess_vld) {
+			langwell->hsm.b_hnp_enable = 0;
+
+			if (langwell->client_ops) {
+				langwell->client_ops->suspend(langwell->pdev,
+					PMSG_FREEZE);
+			} else
+				otg_dbg("client driver has been removed.\n");
+
+			langwell->otg.state = OTG_STATE_B_IDLE;
+		} else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
+			&& langwell->hsm.a_bus_suspend) {
+
+			if (langwell->client_ops) {
+				langwell->client_ops->suspend(langwell->pdev,
+					PMSG_FREEZE);
+			} else
+				otg_dbg("client driver has been removed.\n");
+
+			langwell_otg_HAAR(1);
+			langwell->hsm.a_conn = 0;
+
+			if (langwell->host_ops) {
+				langwell->host_ops->probe(langwell->pdev,
+					langwell->host_ops->id_table);
+				langwell->otg.state = OTG_STATE_B_WAIT_ACON;
+			} else
+				otg_dbg("host driver not loaded.\n");
+
+			langwell->hsm.a_bus_resume = 0;
+			langwell->hsm.b_ase0_brst_tmout = 0;
+			langwell_otg_add_timer(b_ase0_brst_tmr);
+		}
+		break;
+
+	case OTG_STATE_B_WAIT_ACON:
+		if (!langwell->hsm.id) {
+			langwell_otg_del_timer(b_ase0_brst_tmr);
+			langwell->otg.default_a = 1;
+			langwell->hsm.a_srp_det = 0;
+
+			langwell_otg_drv_vbus(0);
+			langwell_otg_chrg_vbus(0);
+			set_host_mode();
+
+			langwell_otg_HAAR(0);
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell->otg.state = OTG_STATE_A_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (!langwell->hsm.b_sess_vld) {
+			langwell_otg_del_timer(b_ase0_brst_tmr);
+			langwell->hsm.b_hnp_enable = 0;
+			langwell->hsm.b_bus_req = 0;
+			langwell_otg_chrg_vbus(0);
+			langwell_otg_HAAR(0);
+
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell->otg.state = OTG_STATE_B_IDLE;
+		} else if (langwell->hsm.a_conn) {
+			langwell_otg_del_timer(b_ase0_brst_tmr);
+			langwell_otg_HAAR(0);
+			langwell->otg.state = OTG_STATE_B_HOST;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (langwell->hsm.a_bus_resume ||
+				langwell->hsm.b_ase0_brst_tmout) {
+			langwell_otg_del_timer(b_ase0_brst_tmr);
+			langwell_otg_HAAR(0);
+			langwell_otg_nsf_msg(7);
+
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+
+			langwell->hsm.a_bus_suspend = 0;
+			langwell->hsm.b_bus_req = 0;
+
+			if (langwell->client_ops)
+				langwell->client_ops->resume(langwell->pdev);
+			else
+				otg_dbg("client driver not loaded.\n");
+
+			langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+		}
+		break;
+
+	case OTG_STATE_B_HOST:
+		if (!langwell->hsm.id) {
+			langwell->otg.default_a = 1;
+			langwell->hsm.a_srp_det = 0;
+
+			langwell_otg_drv_vbus(0);
+			langwell_otg_chrg_vbus(0);
+			set_host_mode();
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell->otg.state = OTG_STATE_A_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (!langwell->hsm.b_sess_vld) {
+			langwell->hsm.b_hnp_enable = 0;
+			langwell->hsm.b_bus_req = 0;
+			langwell_otg_chrg_vbus(0);
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell->otg.state = OTG_STATE_B_IDLE;
+		} else if ((!langwell->hsm.b_bus_req) ||
+				(!langwell->hsm.a_conn)) {
+			langwell->hsm.b_bus_req = 0;
+			langwell_otg_loc_sof(0);
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+
+			langwell->hsm.a_bus_suspend = 0;
+
+			if (langwell->client_ops)
+				langwell->client_ops->resume(langwell->pdev);
+			else
+				otg_dbg("client driver not loaded.\n");
+
+			langwell->otg.state = OTG_STATE_B_PERIPHERAL;
+		}
+		break;
+
+	case OTG_STATE_A_IDLE:
+		langwell->otg.default_a = 1;
+		if (langwell->hsm.id) {
+			langwell->otg.default_a = 0;
+			langwell->hsm.b_bus_req = 0;
+			langwell_otg_drv_vbus(0);
+			langwell_otg_chrg_vbus(0);
+
+			langwell->otg.state = OTG_STATE_B_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (langwell->hsm.a_sess_vld) {
+			langwell_otg_drv_vbus(1);
+			langwell->hsm.a_srp_det = 1;
+			langwell->hsm.a_wait_vrise_tmout = 0;
+			langwell_otg_add_timer(a_wait_vrise_tmr);
+			langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (!langwell->hsm.a_bus_drop &&
+			(langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
+			langwell_otg_drv_vbus(1);
+			langwell->hsm.a_wait_vrise_tmout = 0;
+			langwell_otg_add_timer(a_wait_vrise_tmr);
+			langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+			queue_work(langwell->qwork, &langwell->work);
+		}
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		if (langwell->hsm.id) {
+			langwell_otg_del_timer(a_wait_vrise_tmr);
+			langwell->hsm.b_bus_req = 0;
+			langwell->otg.default_a = 0;
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_B_IDLE;
+		} else if (langwell->hsm.a_vbus_vld) {
+			langwell_otg_del_timer(a_wait_vrise_tmr);
+			if (langwell->host_ops)
+				langwell->host_ops->probe(langwell->pdev,
+						langwell->host_ops->id_table);
+			else
+				otg_dbg("host driver not loaded.\n");
+			langwell->hsm.b_conn = 0;
+			langwell->hsm.a_set_b_hnp_en = 0;
+			langwell->hsm.a_wait_bcon_tmout = 0;
+			langwell_otg_add_timer(a_wait_bcon_tmr);
+			langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+		} else if (langwell->hsm.a_wait_vrise_tmout) {
+			if (langwell->hsm.a_vbus_vld) {
+				if (langwell->host_ops)
+					langwell->host_ops->probe(
+						langwell->pdev,
+						langwell->host_ops->id_table);
+				else
+					otg_dbg("host driver not loaded.\n");
+				langwell->hsm.b_conn = 0;
+				langwell->hsm.a_set_b_hnp_en = 0;
+				langwell->hsm.a_wait_bcon_tmout = 0;
+				langwell_otg_add_timer(a_wait_bcon_tmr);
+				langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+			} else {
+				langwell_otg_drv_vbus(0);
+				langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+			}
+		}
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		if (langwell->hsm.id) {
+			langwell_otg_del_timer(a_wait_bcon_tmr);
+
+			langwell->otg.default_a = 0;
+			langwell->hsm.b_bus_req = 0;
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_B_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (!langwell->hsm.a_vbus_vld) {
+			langwell_otg_del_timer(a_wait_bcon_tmr);
+
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+		} else if (langwell->hsm.a_bus_drop ||
+				(langwell->hsm.a_wait_bcon_tmout &&
+				!langwell->hsm.a_bus_req)) {
+			langwell_otg_del_timer(a_wait_bcon_tmr);
+
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+		} else if (langwell->hsm.b_conn) {
+			langwell_otg_del_timer(a_wait_bcon_tmr);
+
+			langwell->hsm.a_suspend_req = 0;
+			langwell->otg.state = OTG_STATE_A_HOST;
+			if (!langwell->hsm.a_bus_req &&
+				langwell->hsm.a_set_b_hnp_en) {
+				/* It is not safe enough to do a fast
+				 * transistion from A_WAIT_BCON to
+				 * A_SUSPEND */
+				msleep(10000);
+				if (langwell->hsm.a_bus_req)
+					break;
+
+				if (request_irq(langwell->pdev->irq,
+					otg_dummy_irq, IRQF_SHARED,
+					driver_name, langwell->regs) != 0) {
+					otg_dbg("request interrupt %d fail\n",
+					langwell->pdev->irq);
+				}
+
+				langwell_otg_HABA(1);
+				langwell->hsm.b_bus_resume = 0;
+				langwell->hsm.a_aidl_bdis_tmout = 0;
+				langwell_otg_add_timer(a_aidl_bdis_tmr);
+
+				langwell_otg_loc_sof(0);
+				langwell->otg.state = OTG_STATE_A_SUSPEND;
+			} else if (!langwell->hsm.a_bus_req &&
+				!langwell->hsm.a_set_b_hnp_en) {
+				struct pci_dev *pdev = langwell->pdev;
+				if (langwell->host_ops)
+					langwell->host_ops->remove(pdev);
+				else
+					otg_dbg("host driver removed.\n");
+				langwell_otg_drv_vbus(0);
+				langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+			}
+		}
+		break;
+	case OTG_STATE_A_HOST:
+		if (langwell->hsm.id) {
+			langwell->otg.default_a = 0;
+			langwell->hsm.b_bus_req = 0;
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_B_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (langwell->hsm.a_bus_drop ||
+		(!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+		} else if (!langwell->hsm.a_vbus_vld) {
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+		} else if (langwell->hsm.a_set_b_hnp_en
+				&& !langwell->hsm.a_bus_req) {
+			/* Set HABA to enable hardware assistance to signal
+			 *  A-connect after receiver B-disconnect. Hardware
+			 *  will then set client mode and enable URE, SLE and
+			 *  PCE after the assistance. otg_dummy_irq is used to
+			 *  clean these ints when client driver is not resumed.
+			 */
+			if (request_irq(langwell->pdev->irq,
+				otg_dummy_irq, IRQF_SHARED, driver_name,
+				langwell->regs) != 0) {
+				otg_dbg("request interrupt %d failed\n",
+						langwell->pdev->irq);
+			}
+
+			/* set HABA */
+			langwell_otg_HABA(1);
+			langwell->hsm.b_bus_resume = 0;
+			langwell->hsm.a_aidl_bdis_tmout = 0;
+			langwell_otg_add_timer(a_aidl_bdis_tmr);
+			langwell_otg_loc_sof(0);
+			langwell->otg.state = OTG_STATE_A_SUSPEND;
+		} else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
+			langwell->hsm.a_wait_bcon_tmout = 0;
+			langwell->hsm.a_set_b_hnp_en = 0;
+			langwell_otg_add_timer(a_wait_bcon_tmr);
+			langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+		}
+		break;
+	case OTG_STATE_A_SUSPEND:
+		if (langwell->hsm.id) {
+			langwell_otg_del_timer(a_aidl_bdis_tmr);
+			langwell_otg_HABA(0);
+			free_irq(langwell->pdev->irq, langwell->regs);
+			langwell->otg.default_a = 0;
+			langwell->hsm.b_bus_req = 0;
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_B_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (langwell->hsm.a_bus_req ||
+				langwell->hsm.b_bus_resume) {
+			langwell_otg_del_timer(a_aidl_bdis_tmr);
+			langwell_otg_HABA(0);
+			free_irq(langwell->pdev->irq, langwell->regs);
+			langwell->hsm.a_suspend_req = 0;
+			langwell_otg_loc_sof(1);
+			langwell->otg.state = OTG_STATE_A_HOST;
+		} else if (langwell->hsm.a_aidl_bdis_tmout ||
+				langwell->hsm.a_bus_drop) {
+			langwell_otg_del_timer(a_aidl_bdis_tmr);
+			langwell_otg_HABA(0);
+			free_irq(langwell->pdev->irq, langwell->regs);
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+		} else if (!langwell->hsm.b_conn &&
+				langwell->hsm.a_set_b_hnp_en) {
+			langwell_otg_del_timer(a_aidl_bdis_tmr);
+			langwell_otg_HABA(0);
+			free_irq(langwell->pdev->irq, langwell->regs);
+
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+
+			langwell->hsm.b_bus_suspend = 0;
+			langwell->hsm.b_bus_suspend_vld = 0;
+			langwell->hsm.b_bus_suspend_tmout = 0;
+
+			/* msleep(200); */
+			if (langwell->client_ops)
+				langwell->client_ops->resume(langwell->pdev);
+			else
+				otg_dbg("client driver not loaded.\n");
+
+			langwell_otg_add_timer(b_bus_suspend_tmr);
+			langwell->otg.state = OTG_STATE_A_PERIPHERAL;
+			break;
+		} else if (!langwell->hsm.a_vbus_vld) {
+			langwell_otg_del_timer(a_aidl_bdis_tmr);
+			langwell_otg_HABA(0);
+			free_irq(langwell->pdev->irq, langwell->regs);
+			if (langwell->host_ops)
+				langwell->host_ops->remove(langwell->pdev);
+			else
+				otg_dbg("host driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+		}
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		if (langwell->hsm.id) {
+			langwell_otg_del_timer(b_bus_suspend_tmr);
+			langwell->otg.default_a = 0;
+			langwell->hsm.b_bus_req = 0;
+			if (langwell->client_ops)
+				langwell->client_ops->suspend(langwell->pdev,
+					PMSG_FREEZE);
+			else
+				otg_dbg("client driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_B_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (!langwell->hsm.a_vbus_vld) {
+			langwell_otg_del_timer(b_bus_suspend_tmr);
+			if (langwell->client_ops)
+				langwell->client_ops->suspend(langwell->pdev,
+					PMSG_FREEZE);
+			else
+				otg_dbg("client driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_A_VBUS_ERR;
+		} else if (langwell->hsm.a_bus_drop) {
+			langwell_otg_del_timer(b_bus_suspend_tmr);
+			if (langwell->client_ops)
+				langwell->client_ops->suspend(langwell->pdev,
+					PMSG_FREEZE);
+			else
+				otg_dbg("client driver has been removed.\n");
+			langwell_otg_drv_vbus(0);
+			langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+		} else if (langwell->hsm.b_bus_suspend) {
+			langwell_otg_del_timer(b_bus_suspend_tmr);
+			if (langwell->client_ops)
+				langwell->client_ops->suspend(langwell->pdev,
+					PMSG_FREEZE);
+			else
+				otg_dbg("client driver has been removed.\n");
+
+			if (langwell->host_ops)
+				langwell->host_ops->probe(langwell->pdev,
+						langwell->host_ops->id_table);
+			else
+				otg_dbg("host driver not loaded.\n");
+			langwell->hsm.a_set_b_hnp_en = 0;
+			langwell->hsm.a_wait_bcon_tmout = 0;
+			langwell_otg_add_timer(a_wait_bcon_tmr);
+			langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+		} else if (langwell->hsm.b_bus_suspend_tmout) {
+			u32	val;
+			val = readl(langwell->regs + CI_PORTSC1);
+			if (!(val & PORTSC_SUSP))
+				break;
+			if (langwell->client_ops)
+				langwell->client_ops->suspend(langwell->pdev,
+						PMSG_FREEZE);
+			else
+				otg_dbg("client driver has been removed.\n");
+			if (langwell->host_ops)
+				langwell->host_ops->probe(langwell->pdev,
+						langwell->host_ops->id_table);
+			else
+				otg_dbg("host driver not loaded.\n");
+			langwell->hsm.a_set_b_hnp_en = 0;
+			langwell->hsm.a_wait_bcon_tmout = 0;
+			langwell_otg_add_timer(a_wait_bcon_tmr);
+			langwell->otg.state = OTG_STATE_A_WAIT_BCON;
+		}
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		if (langwell->hsm.id) {
+			langwell->otg.default_a = 0;
+			langwell->hsm.a_clr_err = 0;
+			langwell->hsm.a_srp_det = 0;
+			langwell->otg.state = OTG_STATE_B_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (langwell->hsm.a_clr_err) {
+			langwell->hsm.a_clr_err = 0;
+			langwell->hsm.a_srp_det = 0;
+			reset_otg();
+			init_hsm();
+			if (langwell->otg.state == OTG_STATE_A_IDLE)
+				queue_work(langwell->qwork, &langwell->work);
+		}
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		if (langwell->hsm.id) {
+			langwell->otg.default_a = 0;
+			langwell->otg.state = OTG_STATE_B_IDLE;
+			queue_work(langwell->qwork, &langwell->work);
+		} else if (langwell->hsm.a_bus_req) {
+			langwell_otg_drv_vbus(1);
+			langwell->hsm.a_wait_vrise_tmout = 0;
+			langwell_otg_add_timer(a_wait_vrise_tmr);
+			langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
+		} else if (!langwell->hsm.a_sess_vld) {
+			langwell->hsm.a_srp_det = 0;
+			langwell_otg_drv_vbus(0);
+			set_host_mode();
+			langwell->otg.state = OTG_STATE_A_IDLE;
+		}
+		break;
+	default:
+		;
+	}
+
+	otg_dbg("%s: new state = %s\n", __func__,
+			state_string(langwell->otg.state));
+}
+
+	static ssize_t
+show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+	struct langwell_otg *langwell;
+	char *next;
+	unsigned size;
+	unsigned t;
+
+	langwell = the_transceiver;
+	next = buf;
+	size = PAGE_SIZE;
+
+	t = scnprintf(next, size,
+		"\n"
+		"USBCMD = 0x%08x \n"
+		"USBSTS = 0x%08x \n"
+		"USBINTR = 0x%08x \n"
+		"ASYNCLISTADDR = 0x%08x \n"
+		"PORTSC1 = 0x%08x \n"
+		"HOSTPC1 = 0x%08x \n"
+		"OTGSC = 0x%08x \n"
+		"USBMODE = 0x%08x \n",
+		readl(langwell->regs + 0x30),
+		readl(langwell->regs + 0x34),
+		readl(langwell->regs + 0x38),
+		readl(langwell->regs + 0x48),
+		readl(langwell->regs + 0x74),
+		readl(langwell->regs + 0xb4),
+		readl(langwell->regs + 0xf4),
+		readl(langwell->regs + 0xf8)
+		);
+	size -= t;
+	next += t;
+
+	return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
+
+static ssize_t
+show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+	struct langwell_otg *langwell;
+	char *next;
+	unsigned size;
+	unsigned t;
+
+	langwell = the_transceiver;
+	next = buf;
+	size = PAGE_SIZE;
+
+	t = scnprintf(next, size,
+		"\n"
+		"current state = %s\n"
+		"a_bus_resume = \t%d\n"
+		"a_bus_suspend = \t%d\n"
+		"a_conn = \t%d\n"
+		"a_sess_vld = \t%d\n"
+		"a_srp_det = \t%d\n"
+		"a_vbus_vld = \t%d\n"
+		"b_bus_resume = \t%d\n"
+		"b_bus_suspend = \t%d\n"
+		"b_conn = \t%d\n"
+		"b_se0_srp = \t%d\n"
+		"b_sess_end = \t%d\n"
+		"b_sess_vld = \t%d\n"
+		"id = \t%d\n"
+		"a_set_b_hnp_en = \t%d\n"
+		"b_srp_done = \t%d\n"
+		"b_hnp_enable = \t%d\n"
+		"a_wait_vrise_tmout = \t%d\n"
+		"a_wait_bcon_tmout = \t%d\n"
+		"a_aidl_bdis_tmout = \t%d\n"
+		"b_ase0_brst_tmout = \t%d\n"
+		"a_bus_drop = \t%d\n"
+		"a_bus_req = \t%d\n"
+		"a_clr_err = \t%d\n"
+		"a_suspend_req = \t%d\n"
+		"b_bus_req = \t%d\n"
+		"b_bus_suspend_tmout = \t%d\n"
+		"b_bus_suspend_vld = \t%d\n",
+		state_string(langwell->otg.state),
+		langwell->hsm.a_bus_resume,
+		langwell->hsm.a_bus_suspend,
+		langwell->hsm.a_conn,
+		langwell->hsm.a_sess_vld,
+		langwell->hsm.a_srp_det,
+		langwell->hsm.a_vbus_vld,
+		langwell->hsm.b_bus_resume,
+		langwell->hsm.b_bus_suspend,
+		langwell->hsm.b_conn,
+		langwell->hsm.b_se0_srp,
+		langwell->hsm.b_sess_end,
+		langwell->hsm.b_sess_vld,
+		langwell->hsm.id,
+		langwell->hsm.a_set_b_hnp_en,
+		langwell->hsm.b_srp_done,
+		langwell->hsm.b_hnp_enable,
+		langwell->hsm.a_wait_vrise_tmout,
+		langwell->hsm.a_wait_bcon_tmout,
+		langwell->hsm.a_aidl_bdis_tmout,
+		langwell->hsm.b_ase0_brst_tmout,
+		langwell->hsm.a_bus_drop,
+		langwell->hsm.a_bus_req,
+		langwell->hsm.a_clr_err,
+		langwell->hsm.a_suspend_req,
+		langwell->hsm.b_bus_req,
+		langwell->hsm.b_bus_suspend_tmout,
+		langwell->hsm.b_bus_suspend_vld
+		);
+	size -= t;
+	next += t;
+
+	return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
+
+static ssize_t
+get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct langwell_otg *langwell;
+	char *next;
+	unsigned size;
+	unsigned t;
+
+	langwell =  the_transceiver;
+	next = buf;
+	size = PAGE_SIZE;
+
+	t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
+	size -= t;
+	next += t;
+
+	return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_a_bus_req(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct langwell_otg *langwell;
+	langwell = the_transceiver;
+	if (!langwell->otg.default_a)
+		return -1;
+	if (count > 2)
+		return -1;
+
+	if (buf[0] == '0') {
+		langwell->hsm.a_bus_req = 0;
+		otg_dbg("a_bus_req = 0\n");
+	} else if (buf[0] == '1') {
+		/* If a_bus_drop is TRUE, a_bus_req can't be set */
+		if (langwell->hsm.a_bus_drop)
+			return -1;
+		langwell->hsm.a_bus_req = 1;
+		otg_dbg("a_bus_req = 1\n");
+	}
+	if (spin_trylock(&langwell->wq_lock)) {
+		queue_work(langwell->qwork, &langwell->work);
+		spin_unlock(&langwell->wq_lock);
+	}
+	return count;
+}
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+
+static ssize_t
+get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct langwell_otg *langwell;
+	char *next;
+	unsigned size;
+	unsigned t;
+
+	langwell =  the_transceiver;
+	next = buf;
+	size = PAGE_SIZE;
+
+	t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
+	size -= t;
+	next += t;
+
+	return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_a_bus_drop(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct langwell_otg *langwell;
+	langwell = the_transceiver;
+	if (!langwell->otg.default_a)
+		return -1;
+	if (count > 2)
+		return -1;
+
+	if (buf[0] == '0') {
+		langwell->hsm.a_bus_drop = 0;
+		otg_dbg("a_bus_drop = 0\n");
+	} else if (buf[0] == '1') {
+		langwell->hsm.a_bus_drop = 1;
+		langwell->hsm.a_bus_req = 0;
+		otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
+	}
+	if (spin_trylock(&langwell->wq_lock)) {
+		queue_work(langwell->qwork, &langwell->work);
+		spin_unlock(&langwell->wq_lock);
+	}
+	return count;
+}
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
+	get_a_bus_drop, set_a_bus_drop);
+
+static ssize_t
+get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct langwell_otg *langwell;
+	char *next;
+	unsigned size;
+	unsigned t;
+
+	langwell =  the_transceiver;
+	next = buf;
+	size = PAGE_SIZE;
+
+	t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
+	size -= t;
+	next += t;
+
+	return PAGE_SIZE - size;
+}
+
+static ssize_t
+set_b_bus_req(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct langwell_otg *langwell;
+	langwell = the_transceiver;
+
+	if (langwell->otg.default_a)
+		return -1;
+
+	if (count > 2)
+		return -1;
+
+	if (buf[0] == '0') {
+		langwell->hsm.b_bus_req = 0;
+		otg_dbg("b_bus_req = 0\n");
+	} else if (buf[0] == '1') {
+		langwell->hsm.b_bus_req = 1;
+		otg_dbg("b_bus_req = 1\n");
+	}
+	if (spin_trylock(&langwell->wq_lock)) {
+		queue_work(langwell->qwork, &langwell->work);
+		spin_unlock(&langwell->wq_lock);
+	}
+	return count;
+}
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+
+static ssize_t
+set_a_clr_err(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct langwell_otg *langwell;
+	langwell = the_transceiver;
+
+	if (!langwell->otg.default_a)
+		return -1;
+	if (count > 2)
+		return -1;
+
+	if (buf[0] == '1') {
+		langwell->hsm.a_clr_err = 1;
+		otg_dbg("a_clr_err = 1\n");
+	}
+	if (spin_trylock(&langwell->wq_lock)) {
+		queue_work(langwell->qwork, &langwell->work);
+		spin_unlock(&langwell->wq_lock);
+	}
+	return count;
+}
+static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+
+static struct attribute *inputs_attrs[] = {
+	&dev_attr_a_bus_req.attr,
+	&dev_attr_a_bus_drop.attr,
+	&dev_attr_b_bus_req.attr,
+	&dev_attr_a_clr_err.attr,
+	NULL,
+};
+
+static struct attribute_group debug_dev_attr_group = {
+	.name = "inputs",
+	.attrs = inputs_attrs,
+};
+
+int langwell_register_host(struct pci_driver *host_driver)
+{
+	int	ret = 0;
+
+	the_transceiver->host_ops = host_driver;
+	queue_work(the_transceiver->qwork, &the_transceiver->work);
+	otg_dbg("host controller driver is registered\n");
+
+	return ret;
+}
+EXPORT_SYMBOL(langwell_register_host);
+
+void langwell_unregister_host(struct pci_driver *host_driver)
+{
+	if (the_transceiver->host_ops)
+		the_transceiver->host_ops->remove(the_transceiver->pdev);
+	the_transceiver->host_ops = NULL;
+	the_transceiver->hsm.a_bus_drop = 1;
+	queue_work(the_transceiver->qwork, &the_transceiver->work);
+	otg_dbg("host controller driver is unregistered\n");
+}
+EXPORT_SYMBOL(langwell_unregister_host);
+
+int langwell_register_peripheral(struct pci_driver *client_driver)
+{
+	int	ret = 0;
+
+	if (client_driver)
+		ret = client_driver->probe(the_transceiver->pdev,
+				client_driver->id_table);
+	if (!ret) {
+		the_transceiver->client_ops = client_driver;
+		queue_work(the_transceiver->qwork, &the_transceiver->work);
+		otg_dbg("client controller driver is registered\n");
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(langwell_register_peripheral);
+
+void langwell_unregister_peripheral(struct pci_driver *client_driver)
+{
+	if (the_transceiver->client_ops)
+		the_transceiver->client_ops->remove(the_transceiver->pdev);
+	the_transceiver->client_ops = NULL;
+	the_transceiver->hsm.b_bus_req = 0;
+	queue_work(the_transceiver->qwork, &the_transceiver->work);
+	otg_dbg("client controller driver is unregistered\n");
+}
+EXPORT_SYMBOL(langwell_unregister_peripheral);
+
+static int langwell_otg_probe(struct pci_dev *pdev,
+		const struct pci_device_id *id)
+{
+	unsigned long		resource, len;
+	void __iomem 		*base = NULL;
+	int			retval;
+	u32			val32;
+	struct langwell_otg	*langwell;
+	char			qname[] = "langwell_otg_queue";
+
+	retval = 0;
+	otg_dbg("\notg controller is detected.\n");
+	if (pci_enable_device(pdev) < 0) {
+		retval = -ENODEV;
+		goto done;
+	}
+
+	langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
+	if (langwell == NULL) {
+		retval = -ENOMEM;
+		goto done;
+	}
+	the_transceiver = langwell;
+
+	/* control register: BAR 0 */
+	resource = pci_resource_start(pdev, 0);
+	len = pci_resource_len(pdev, 0);
+	if (!request_mem_region(resource, len, driver_name)) {
+		retval = -EBUSY;
+		goto err;
+	}
+	langwell->region = 1;
+
+	base = ioremap_nocache(resource, len);
+	if (base == NULL) {
+		retval = -EFAULT;
+		goto err;
+	}
+	langwell->regs = base;
+
+	if (!pdev->irq) {
+		otg_dbg("No IRQ.\n");
+		retval = -ENODEV;
+		goto err;
+	}
+
+	langwell->qwork = create_workqueue(qname);
+	if (!langwell->qwork) {
+		otg_dbg("cannot create workqueue %s\n", qname);
+		retval = -ENOMEM;
+		goto err;
+	}
+	INIT_WORK(&langwell->work, langwell_otg_work);
+
+	/* OTG common part */
+	langwell->pdev = pdev;
+	langwell->otg.dev = &pdev->dev;
+	langwell->otg.label = driver_name;
+	langwell->otg.set_host = langwell_otg_set_host;
+	langwell->otg.set_peripheral = langwell_otg_set_peripheral;
+	langwell->otg.set_power = langwell_otg_set_power;
+	langwell->otg.start_srp = langwell_otg_start_srp;
+	langwell->otg.state = OTG_STATE_UNDEFINED;
+	if (otg_set_transceiver(&langwell->otg)) {
+		otg_dbg("can't set transceiver\n");
+		retval = -EBUSY;
+		goto err;
+	}
+
+	reset_otg();
+	init_hsm();
+
+	spin_lock_init(&langwell->lock);
+	spin_lock_init(&langwell->wq_lock);
+	INIT_LIST_HEAD(&active_timers);
+	langwell_otg_init_timers(&langwell->hsm);
+
+	if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
+				driver_name, langwell) != 0) {
+		otg_dbg("request interrupt %d failed\n", pdev->irq);
+		retval = -EBUSY;
+		goto err;
+	}
+
+	/* enable OTGSC int */
+	val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
+		OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
+	writel(val32, langwell->regs + CI_OTGSC);
+
+	retval = device_create_file(&pdev->dev, &dev_attr_registers);
+	if (retval < 0) {
+		otg_dbg("Can't register sysfs attribute: %d\n", retval);
+		goto err;
+	}
+
+	retval = device_create_file(&pdev->dev, &dev_attr_hsm);
+	if (retval < 0) {
+		otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
+		goto err;
+	}
+
+	retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
+	if (retval < 0) {
+		otg_dbg("Can't register sysfs attr group: %d\n", retval);
+		goto err;
+	}
+
+	if (langwell->otg.state == OTG_STATE_A_IDLE)
+		queue_work(langwell->qwork, &langwell->work);
+
+	return 0;
+
+err:
+	if (the_transceiver)
+		langwell_otg_remove(pdev);
+done:
+	return retval;
+}
+
+static void langwell_otg_remove(struct pci_dev *pdev)
+{
+	struct langwell_otg *langwell;
+
+	langwell = the_transceiver;
+
+	if (langwell->qwork) {
+		flush_workqueue(langwell->qwork);
+		destroy_workqueue(langwell->qwork);
+	}
+	langwell_otg_free_timers();
+
+	/* disable OTGSC interrupt as OTGSC doesn't change in reset */
+	writel(0, langwell->regs + CI_OTGSC);
+
+	if (pdev->irq)
+		free_irq(pdev->irq, langwell);
+	if (langwell->regs)
+		iounmap(langwell->regs);
+	if (langwell->region)
+		release_mem_region(pci_resource_start(pdev, 0),
+				pci_resource_len(pdev, 0));
+
+	otg_set_transceiver(NULL);
+	pci_disable_device(pdev);
+	sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
+	device_remove_file(&pdev->dev, &dev_attr_hsm);
+	device_remove_file(&pdev->dev, &dev_attr_registers);
+	kfree(langwell);
+	langwell = NULL;
+}
+
+static void transceiver_suspend(struct pci_dev *pdev)
+{
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+	langwell_otg_phy_low_power(1);
+}
+
+static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
+{
+	int 	ret = 0;
+	struct langwell_otg *langwell;
+
+	langwell = the_transceiver;
+
+	/* Disbale OTG interrupts */
+	langwell_otg_intr(0);
+
+	if (pdev->irq)
+		free_irq(pdev->irq, langwell);
+
+	/* Prevent more otg_work */
+	flush_workqueue(langwell->qwork);
+	spin_lock(&langwell->wq_lock);
+
+	/* start actions */
+	switch (langwell->otg.state) {
+	case OTG_STATE_A_IDLE:
+	case OTG_STATE_B_IDLE:
+	case OTG_STATE_A_WAIT_VFALL:
+	case OTG_STATE_A_VBUS_ERR:
+		transceiver_suspend(pdev);
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		langwell_otg_del_timer(a_wait_vrise_tmr);
+		langwell->hsm.a_srp_det = 0;
+		langwell_otg_drv_vbus(0);
+		langwell->otg.state = OTG_STATE_A_IDLE;
+		transceiver_suspend(pdev);
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		langwell_otg_del_timer(a_wait_bcon_tmr);
+		if (langwell->host_ops)
+			ret = langwell->host_ops->suspend(pdev, message);
+		langwell_otg_drv_vbus(0);
+		break;
+	case OTG_STATE_A_HOST:
+		if (langwell->host_ops)
+			ret = langwell->host_ops->suspend(pdev, message);
+		langwell_otg_drv_vbus(0);
+		langwell_otg_phy_low_power(1);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		langwell_otg_del_timer(a_aidl_bdis_tmr);
+		langwell_otg_HABA(0);
+		if (langwell->host_ops)
+			langwell->host_ops->remove(pdev);
+		else
+			otg_dbg("host driver has been removed.\n");
+		langwell_otg_drv_vbus(0);
+		transceiver_suspend(pdev);
+		langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		if (langwell->client_ops)
+			ret = langwell->client_ops->suspend(pdev, message);
+		else
+			otg_dbg("client driver has been removed.\n");
+		langwell_otg_drv_vbus(0);
+		transceiver_suspend(pdev);
+		langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	case OTG_STATE_B_HOST:
+		if (langwell->host_ops)
+			langwell->host_ops->remove(pdev);
+		else
+			otg_dbg("host driver has been removed.\n");
+		langwell->hsm.b_bus_req = 0;
+		transceiver_suspend(pdev);
+		langwell->otg.state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (langwell->client_ops)
+			ret = langwell->client_ops->suspend(pdev, message);
+		else
+			otg_dbg("client driver has been removed.\n");
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		langwell_otg_del_timer(b_ase0_brst_tmr);
+		langwell_otg_HAAR(0);
+		if (langwell->host_ops)
+			langwell->host_ops->remove(pdev);
+		else
+			otg_dbg("host driver has been removed.\n");
+		langwell->hsm.b_bus_req = 0;
+		langwell->otg.state = OTG_STATE_B_IDLE;
+		transceiver_suspend(pdev);
+		break;
+	default:
+		otg_dbg("error state before suspend\n ");
+		break;
+	}
+	spin_unlock(&langwell->wq_lock);
+
+	return ret;
+}
+
+static void transceiver_resume(struct pci_dev *pdev)
+{
+	pci_restore_state(pdev);
+	pci_set_power_state(pdev, PCI_D0);
+	langwell_otg_phy_low_power(0);
+}
+
+static int langwell_otg_resume(struct pci_dev *pdev)
+{
+	int 	ret = 0;
+	struct langwell_otg *langwell;
+
+	langwell = the_transceiver;
+
+	spin_lock(&langwell->wq_lock);
+
+	switch (langwell->otg.state) {
+	case OTG_STATE_A_IDLE:
+	case OTG_STATE_B_IDLE:
+	case OTG_STATE_A_WAIT_VFALL:
+	case OTG_STATE_A_VBUS_ERR:
+		transceiver_resume(pdev);
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		langwell_otg_add_timer(a_wait_bcon_tmr);
+		langwell_otg_drv_vbus(1);
+		if (langwell->host_ops)
+			ret = langwell->host_ops->resume(pdev);
+		break;
+	case OTG_STATE_A_HOST:
+		langwell_otg_drv_vbus(1);
+		langwell_otg_phy_low_power(0);
+		if (langwell->host_ops)
+			ret = langwell->host_ops->resume(pdev);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (langwell->client_ops)
+			ret = langwell->client_ops->resume(pdev);
+		else
+			otg_dbg("client driver not loaded.\n");
+		break;
+	default:
+		otg_dbg("error state before suspend\n ");
+		break;
+	}
+
+	if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
+				driver_name, the_transceiver) != 0) {
+		otg_dbg("request interrupt %d failed\n", pdev->irq);
+		ret = -EBUSY;
+	}
+
+	/* enable OTG interrupts */
+	langwell_otg_intr(1);
+
+	spin_unlock(&langwell->wq_lock);
+
+	queue_work(langwell->qwork, &langwell->work);
+
+
+	return ret;
+}
+
+static int __init langwell_otg_init(void)
+{
+	return pci_register_driver(&otg_pci_driver);
+}
+module_init(langwell_otg_init);
+
+static void __exit langwell_otg_cleanup(void)
+{
+	pci_unregister_driver(&otg_pci_driver);
+}
+module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index c567168f89a..9ed5ea56867 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -22,8 +22,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * Current status:
- * 	this is to add "nop" transceiver for all those phy which is
- * 	autonomous such as isp1504 etc.
+ *	This provides a "nop" transceiver for PHYs which are
+ *	autonomous such as isp1504, isp1707, etc.
  */
 
 #include <linux/module.h>
@@ -36,30 +36,25 @@ struct nop_usb_xceiv {
 	struct device		*dev;
 };
 
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
-	.name           = "nop_usb_xceiv",
-	.id             = -1,
-	.dev = {
-		.dma_mask               = &nop_xceiv_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data          = NULL,
-	},
-};
+static struct platform_device *pd;
 
 void usb_nop_xceiv_register(void)
 {
-	if (platform_device_register(&nop_xceiv_device) < 0) {
+	if (pd)
+		return;
+	pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0);
+	if (!pd) {
 		printk(KERN_ERR "Unable to register usb nop transceiver\n");
 		return;
 	}
 }
+EXPORT_SYMBOL(usb_nop_xceiv_register);
 
 void usb_nop_xceiv_unregister(void)
 {
-	platform_device_unregister(&nop_xceiv_device);
+	platform_device_unregister(pd);
 }
+EXPORT_SYMBOL(usb_nop_xceiv_unregister);
 
 static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x)
 {
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index d9478d0e1c8..9e3e7a5c258 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -217,6 +217,7 @@
 
 /* In module TWL4030_MODULE_PM_MASTER */
 #define PROTECT_KEY			0x0E
+#define STS_HW_CONDITIONS		0x0F
 
 /* In module TWL4030_MODULE_PM_RECEIVER */
 #define VUSB_DEDICATED1			0x7D
@@ -351,15 +352,26 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl)
 	int	status;
 	int	linkstat = USB_LINK_UNKNOWN;
 
-	/* STS_HW_CONDITIONS */
-	status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, 0x0f);
+	/*
+	 * For ID/VBUS sensing, see manual section 15.4.8 ...
+	 * except when using only battery backup power, two
+	 * comparators produce VBUS_PRES and ID_PRES signals,
+	 * which don't match docs elsewhere.  But ... BIT(7)
+	 * and BIT(2) of STS_HW_CONDITIONS, respectively, do
+	 * seem to match up.  If either is true the USB_PRES
+	 * signal is active, the OTG module is activated, and
+	 * its interrupt may be raised (may wake the system).
+	 */
+	status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER,
+			STS_HW_CONDITIONS);
 	if (status < 0)
 		dev_err(twl->dev, "USB link status err %d\n", status);
-	else if (status & BIT(7))
-		linkstat = USB_LINK_VBUS;
-	else if (status & BIT(2))
-		linkstat = USB_LINK_ID;
-	else
+	else if (status & (BIT(7) | BIT(2))) {
+		if (status & BIT(2))
+			linkstat = USB_LINK_ID;
+		else
+			linkstat = USB_LINK_VBUS;
+	} else
 		linkstat = USB_LINK_NONE;
 
 	dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
@@ -641,7 +653,7 @@ static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host)
 	return 0;
 }
 
-static int __init twl4030_usb_probe(struct platform_device *pdev)
+static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 {
 	struct twl4030_usb_data *pdata = pdev->dev.platform_data;
 	struct twl4030_usb	*twl;
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 6d106e74265..2cbfab3716e 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -364,7 +364,7 @@ static int aircable_attach(struct usb_serial *serial)
 	return 0;
 }
 
-static void aircable_shutdown(struct usb_serial *serial)
+static void aircable_release(struct usb_serial *serial)
 {
 
 	struct usb_serial_port *port = serial->port[0];
@@ -375,7 +375,6 @@ static void aircable_shutdown(struct usb_serial *serial)
 	if (priv) {
 		serial_buf_free(priv->tx_buf);
 		serial_buf_free(priv->rx_buf);
-		usb_set_serial_port_data(port, NULL);
 		kfree(priv);
 	}
 }
@@ -601,7 +600,7 @@ static struct usb_serial_driver aircable_device = {
 	.num_ports =		1,
 	.attach =		aircable_attach,
 	.probe =		aircable_probe,
-	.shutdown =		aircable_shutdown,
+	.release =		aircable_release,
 	.write =		aircable_write,
 	.write_room =		aircable_write_room,
 	.write_bulk_callback =	aircable_write_bulk_callback,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 2bfd6dd85b5..7033b031b44 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -90,7 +90,7 @@ static int debug;
 
 /* function prototypes for a Belkin USB Serial Adapter F5U103 */
 static int  belkin_sa_startup(struct usb_serial *serial);
-static void belkin_sa_shutdown(struct usb_serial *serial);
+static void belkin_sa_release(struct usb_serial *serial);
 static int  belkin_sa_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static void belkin_sa_close(struct usb_serial_port *port);
@@ -142,7 +142,7 @@ static struct usb_serial_driver belkin_device = {
 	.tiocmget =		belkin_sa_tiocmget,
 	.tiocmset =		belkin_sa_tiocmset,
 	.attach =		belkin_sa_startup,
-	.shutdown =		belkin_sa_shutdown,
+	.release =		belkin_sa_release,
 };
 
 
@@ -197,14 +197,13 @@ static int belkin_sa_startup(struct usb_serial *serial)
 }
 
 
-static void belkin_sa_shutdown(struct usb_serial *serial)
+static void belkin_sa_release(struct usb_serial *serial)
 {
 	struct belkin_sa_private *priv;
 	int i;
 
 	dbg("%s", __func__);
 
-	/* stop reads and writes on all ports */
 	for (i = 0; i < serial->num_ports; ++i) {
 		/* My special items, the standard routines free my urbs */
 		priv = usb_get_serial_port_data(serial->port[i]);
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 83bbb5bca2e..ba555c528cc 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -59,23 +59,22 @@ static int usb_serial_device_probe(struct device *dev)
 		retval = -ENODEV;
 		goto exit;
 	}
+	if (port->dev_state != PORT_REGISTERING)
+		goto exit;
 
 	driver = port->serial->type;
 	if (driver->port_probe) {
-		if (!try_module_get(driver->driver.owner)) {
-			dev_err(dev, "module get failed, exiting\n");
-			retval = -EIO;
-			goto exit;
-		}
 		retval = driver->port_probe(port);
-		module_put(driver->driver.owner);
 		if (retval)
 			goto exit;
 	}
 
 	retval = device_create_file(dev, &dev_attr_port_number);
-	if (retval)
+	if (retval) {
+		if (driver->port_remove)
+			retval = driver->port_remove(port);
 		goto exit;
+	}
 
 	minor = port->number;
 	tty_register_device(usb_serial_tty_driver, minor, dev);
@@ -98,19 +97,15 @@ static int usb_serial_device_remove(struct device *dev)
 	if (!port)
 		return -ENODEV;
 
+	if (port->dev_state != PORT_UNREGISTERING)
+		return retval;
+
 	device_remove_file(&port->dev, &dev_attr_port_number);
 
 	driver = port->serial->type;
-	if (driver->port_remove) {
-		if (!try_module_get(driver->driver.owner)) {
-			dev_err(dev, "module get failed, exiting\n");
-			retval = -EIO;
-			goto exit;
-		}
+	if (driver->port_remove)
 		retval = driver->port_remove(port);
-		module_put(driver->driver.owner);
-	}
-exit:
+
 	minor = port->number;
 	tty_unregister_device(usb_serial_tty_driver, minor);
 	dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 16a154d3b2f..2b9eeda62bf 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -50,7 +50,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
-static void cp210x_shutdown(struct usb_serial *);
+static void cp210x_disconnect(struct usb_serial *);
 
 static int debug;
 
@@ -137,7 +137,7 @@ static struct usb_serial_driver cp210x_device = {
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
-	.shutdown		= cp210x_shutdown,
+	.disconnect		= cp210x_disconnect,
 };
 
 /* Config request types */
@@ -792,7 +792,7 @@ static int cp210x_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void cp210x_shutdown(struct usb_serial *serial)
+static void cp210x_disconnect(struct usb_serial *serial)
 {
 	int i;
 
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 933ba913e66..336523fd736 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -58,7 +58,8 @@ static int debug;
 
 /* Function prototypes */
 static int cyberjack_startup(struct usb_serial *serial);
-static void cyberjack_shutdown(struct usb_serial *serial);
+static void cyberjack_disconnect(struct usb_serial *serial);
+static void cyberjack_release(struct usb_serial *serial);
 static int  cyberjack_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static void cyberjack_close(struct usb_serial_port *port);
@@ -94,7 +95,8 @@ static struct usb_serial_driver cyberjack_device = {
 	.id_table =		id_table,
 	.num_ports =		1,
 	.attach =		cyberjack_startup,
-	.shutdown =		cyberjack_shutdown,
+	.disconnect =		cyberjack_disconnect,
+	.release =		cyberjack_release,
 	.open =			cyberjack_open,
 	.close =		cyberjack_close,
 	.write =		cyberjack_write,
@@ -148,17 +150,25 @@ static int cyberjack_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void cyberjack_shutdown(struct usb_serial *serial)
+static void cyberjack_disconnect(struct usb_serial *serial)
 {
 	int i;
 
 	dbg("%s", __func__);
 
-	for (i = 0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i)
 		usb_kill_urb(serial->port[i]->interrupt_in_urb);
+}
+
+static void cyberjack_release(struct usb_serial *serial)
+{
+	int i;
+
+	dbg("%s", __func__);
+
+	for (i = 0; i < serial->num_ports; ++i) {
 		/* My special items, the standard routines free my urbs */
 		kfree(usb_get_serial_port_data(serial->port[i]));
-		usb_set_serial_port_data(serial->port[i], NULL);
 	}
 }
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 669f9384853..9734085fd2f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -171,7 +171,7 @@ struct cypress_buf {
 static int  cypress_earthmate_startup(struct usb_serial *serial);
 static int  cypress_hidcom_startup(struct usb_serial *serial);
 static int  cypress_ca42v2_startup(struct usb_serial *serial);
-static void cypress_shutdown(struct usb_serial *serial);
+static void cypress_release(struct usb_serial *serial);
 static int  cypress_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static void cypress_close(struct usb_serial_port *port);
@@ -215,7 +215,7 @@ static struct usb_serial_driver cypress_earthmate_device = {
 	.id_table =			id_table_earthmate,
 	.num_ports =			1,
 	.attach =			cypress_earthmate_startup,
-	.shutdown =			cypress_shutdown,
+	.release =			cypress_release,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -242,7 +242,7 @@ static struct usb_serial_driver cypress_hidcom_device = {
 	.id_table =			id_table_cyphidcomrs232,
 	.num_ports =			1,
 	.attach =			cypress_hidcom_startup,
-	.shutdown =			cypress_shutdown,
+	.release =			cypress_release,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -269,7 +269,7 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.id_table =			id_table_nokiaca42v2,
 	.num_ports =			1,
 	.attach =			cypress_ca42v2_startup,
-	.shutdown =			cypress_shutdown,
+	.release =			cypress_release,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -616,7 +616,7 @@ static int cypress_ca42v2_startup(struct usb_serial *serial)
 } /* cypress_ca42v2_startup */
 
 
-static void cypress_shutdown(struct usb_serial *serial)
+static void cypress_release(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 
@@ -629,7 +629,6 @@ static void cypress_shutdown(struct usb_serial *serial)
 	if (priv) {
 		cypress_buf_free(priv->buf);
 		kfree(priv);
-		usb_set_serial_port_data(serial->port[0], NULL);
 	}
 }
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 30f5140eff0..f4808091c47 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -460,7 +460,8 @@ static int digi_carrier_raised(struct usb_serial_port *port);
 static void digi_dtr_rts(struct usb_serial_port *port, int on);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
-static void digi_shutdown(struct usb_serial *serial);
+static void digi_disconnect(struct usb_serial *serial);
+static void digi_release(struct usb_serial *serial);
 static void digi_read_bulk_callback(struct urb *urb);
 static int digi_read_inb_callback(struct urb *urb);
 static int digi_read_oob_callback(struct urb *urb);
@@ -524,7 +525,8 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.tiocmget =			digi_tiocmget,
 	.tiocmset =			digi_tiocmset,
 	.attach =			digi_startup,
-	.shutdown =			digi_shutdown,
+	.disconnect =			digi_disconnect,
+	.release =			digi_release,
 };
 
 static struct usb_serial_driver digi_acceleport_4_device = {
@@ -550,7 +552,8 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 	.tiocmget =			digi_tiocmget,
 	.tiocmset =			digi_tiocmset,
 	.attach =			digi_startup,
-	.shutdown =			digi_shutdown,
+	.disconnect =			digi_disconnect,
+	.release =			digi_release,
 };
 
 
@@ -1556,16 +1559,23 @@ static int digi_startup(struct usb_serial *serial)
 }
 
 
-static void digi_shutdown(struct usb_serial *serial)
+static void digi_disconnect(struct usb_serial *serial)
 {
 	int i;
-	dbg("digi_shutdown: TOP, in_interrupt()=%ld", in_interrupt());
+	dbg("digi_disconnect: TOP, in_interrupt()=%ld", in_interrupt());
 
 	/* stop reads and writes on all ports */
 	for (i = 0; i < serial->type->num_ports + 1; i++) {
 		usb_kill_urb(serial->port[i]->read_urb);
 		usb_kill_urb(serial->port[i]->write_urb);
 	}
+}
+
+
+static void digi_release(struct usb_serial *serial)
+{
+	int i;
+	dbg("digi_release: TOP, in_interrupt()=%ld", in_interrupt());
 
 	/* free the private data structures for all ports */
 	/* number of regular ports + 1 for the out-of-band port */
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 2b141ccb0cd..80cb3471adb 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -90,7 +90,6 @@ static int  empeg_chars_in_buffer(struct tty_struct *tty);
 static void empeg_throttle(struct tty_struct *tty);
 static void empeg_unthrottle(struct tty_struct *tty);
 static int  empeg_startup(struct usb_serial *serial);
-static void empeg_shutdown(struct usb_serial *serial);
 static void empeg_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
 static void empeg_write_bulk_callback(struct urb *urb);
@@ -124,7 +123,6 @@ static struct usb_serial_driver empeg_device = {
 	.throttle =		empeg_throttle,
 	.unthrottle =		empeg_unthrottle,
 	.attach =		empeg_startup,
-	.shutdown =		empeg_shutdown,
 	.set_termios =		empeg_set_termios,
 	.write =		empeg_write,
 	.write_room =		empeg_write_room,
@@ -427,12 +425,6 @@ static int  empeg_startup(struct usb_serial *serial)
 }
 
 
-static void empeg_shutdown(struct usb_serial *serial)
-{
-	dbg("%s", __func__);
-}
-
-
 static void empeg_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 683304d6061..3dc3768ca71 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -47,7 +47,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.4.3"
+#define DRIVER_VERSION "v1.5.0"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
@@ -82,7 +82,8 @@ struct ftdi_private {
 	int rx_processed;
 	unsigned long rx_bytes;
 
-	__u16 interface;	/* FT2232C port interface (0 for FT232/245) */
+	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
+				   (0 for FT232/245) */
 
 	speed_t force_baud;	/* if non-zero, force the baud rate to
 				   this value */
@@ -94,6 +95,7 @@ struct ftdi_private {
 	unsigned long tx_bytes;
 	unsigned long tx_outstanding_bytes;
 	unsigned long tx_outstanding_urbs;
+	unsigned short max_packet_size;
 };
 
 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -164,6 +166,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -673,6 +676,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -693,12 +697,13 @@ static const char *ftdi_chip_name[] = {
 	[FT232BM] = "FT232BM",
 	[FT2232C] = "FT2232C",
 	[FT232RL] = "FT232RL",
+	[FT2232H] = "FT2232H",
+	[FT4232H] = "FT4232H"
 };
 
 
 /* Constants for read urb and write urb */
 #define BUFSZ 512
-#define PKTSZ 64
 
 /* rx_flags */
 #define THROTTLED		0x01
@@ -715,7 +720,6 @@ static const char *ftdi_chip_name[] = {
 /* function prototypes for a FTDI serial converter */
 static int  ftdi_sio_probe(struct usb_serial *serial,
 					const struct usb_device_id *id);
-static void ftdi_shutdown(struct usb_serial *serial);
 static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
 static int  ftdi_open(struct tty_struct *tty,
@@ -744,6 +748,8 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
 static unsigned short int ftdi_232am_baud_to_divisor(int baud);
 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
 static __u32 ftdi_232bm_baud_to_divisor(int baud);
+static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
+static __u32 ftdi_2232h_baud_to_divisor(int baud);
 
 static struct usb_serial_driver ftdi_sio_device = {
 	.driver = {
@@ -772,7 +778,6 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.ioctl =		ftdi_ioctl,
 	.set_termios =		ftdi_set_termios,
 	.break_ctl =		ftdi_break_ctl,
-	.shutdown =		ftdi_shutdown,
 };
 
 
@@ -838,6 +843,36 @@ static __u32 ftdi_232bm_baud_to_divisor(int baud)
 	 return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
 }
 
+static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
+{
+	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
+	__u32 divisor;
+	int divisor3;
+
+	/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
+	divisor3 = (base / 10 / baud) * 8;
+
+	divisor = divisor3 >> 3;
+	divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
+	/* Deal with special cases for highest baud rates. */
+	if (divisor == 1)
+		divisor = 0;
+	else if (divisor == 0x4001)
+		divisor = 1;
+	/*
+	 * Set this bit to turn off a divide by 2.5 on baud rate generator
+	 * This enables baud rates up to 12Mbaud but cannot reach below 1200
+	 * baud with this bit set
+	 */
+	divisor |= 0x00020000;
+	return divisor;
+}
+
+static __u32 ftdi_2232h_baud_to_divisor(int baud)
+{
+	 return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
+}
+
 #define set_mctrl(port, set)		update_mctrl((port), (set), 0)
 #define clear_mctrl(port, clear)	update_mctrl((port), 0, (clear))
 
@@ -996,6 +1031,19 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 			baud = 9600;
 		}
 		break;
+	case FT2232H: /* FT2232H chip */
+	case FT4232H: /* FT4232H chip */
+		if ((baud <= 12000000) & (baud >= 1200)) {
+			div_value = ftdi_2232h_baud_to_divisor(baud);
+		} else if (baud < 1200) {
+			div_value = ftdi_232bm_baud_to_divisor(baud);
+		} else {
+			dbg("%s - Baud rate too high!", __func__);
+			div_value = ftdi_232bm_baud_to_divisor(9600);
+			div_okay = 0;
+			baud = 9600;
+		}
+		break;
 	} /* priv->chip_type */
 
 	if (div_okay) {
@@ -1196,14 +1244,29 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 	if (interfaces > 1) {
 		int inter;
 
-		/* Multiple interfaces.  Assume FT2232C. */
-		priv->chip_type = FT2232C;
+		/* Multiple interfaces.*/
+		if (version == 0x0800) {
+			priv->chip_type = FT4232H;
+			/* Hi-speed - baud clock runs at 120MHz */
+			priv->baud_base = 120000000 / 2;
+		} else if (version == 0x0700) {
+			priv->chip_type = FT2232H;
+			/* Hi-speed - baud clock runs at 120MHz */
+			priv->baud_base = 120000000 / 2;
+		} else
+			priv->chip_type = FT2232C;
+
 		/* Determine interface code. */
 		inter = serial->interface->altsetting->desc.bInterfaceNumber;
-		if (inter == 0)
-			priv->interface = PIT_SIOA;
-		else
-			priv->interface = PIT_SIOB;
+		if (inter == 0) {
+			priv->interface = INTERFACE_A;
+		} else  if (inter == 1) {
+			priv->interface = INTERFACE_B;
+		} else  if (inter == 2) {
+			priv->interface = INTERFACE_C;
+		} else  if (inter == 3) {
+			priv->interface = INTERFACE_D;
+		}
 		/* BM-type devices have a bug where bcdDevice gets set
 		 * to 0x200 when iSerialNumber is 0.  */
 		if (version < 0x500) {
@@ -1231,6 +1294,45 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 }
 
 
+/* Determine the maximum packet size for the device.  This depends on the chip
+ * type and the USB host capabilities.  The value should be obtained from the
+ * device descriptor as the chip will use the appropriate values for the host.*/
+static void ftdi_set_max_packet_size(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct usb_device *udev = serial->dev;
+
+	struct usb_interface *interface = serial->interface;
+	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+
+	unsigned num_endpoints;
+	int i = 0;
+
+	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
+
+	/* NOTE: some customers have programmed FT232R/FT245R devices
+	 * with an endpoint size of 0 - not good.  In this case, we
+	 * want to override the endpoint descriptor setting and use a
+	 * value of 64 for wMaxPacketSize */
+	for (i = 0; i < num_endpoints; i++) {
+		dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
+			interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+		ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+		if (ep_desc->wMaxPacketSize == 0) {
+			ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
+			dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i);
+		}
+	}
+
+	/* set max packet size based on descriptor */
+	priv->max_packet_size = ep_desc->wMaxPacketSize;
+
+	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
+}
+
+
 /*
  * ***************************************************************************
  * Sysfs Attribute
@@ -1314,7 +1416,9 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
 		if ((!retval) &&
 		    (priv->chip_type == FT232BM ||
 		     priv->chip_type == FT2232C ||
-		     priv->chip_type == FT232RL)) {
+		     priv->chip_type == FT232RL ||
+		     priv->chip_type == FT2232H ||
+		     priv->chip_type == FT4232H)) {
 			retval = device_create_file(&port->dev,
 						    &dev_attr_latency_timer);
 		}
@@ -1333,7 +1437,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 		device_remove_file(&port->dev, &dev_attr_event_char);
 		if (priv->chip_type == FT232BM ||
 		    priv->chip_type == FT2232C ||
-		    priv->chip_type == FT232RL) {
+		    priv->chip_type == FT232RL ||
+		    priv->chip_type == FT2232H ||
+		    priv->chip_type == FT4232H) {
 			device_remove_file(&port->dev, &dev_attr_latency_timer);
 		}
 	}
@@ -1416,6 +1522,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	usb_set_serial_port_data(port, priv);
 
 	ftdi_determine_type(port);
+	ftdi_set_max_packet_size(port);
 	read_latency_timer(port);
 	create_sysfs_attrs(port);
 	return 0;
@@ -1485,18 +1592,6 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
 	return 0;
 }
 
-/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
- *   it is called when the usb device is disconnected
- *
- *   usbserial:usb_serial_disconnect
- *      calls __serial_close for each open of the port
- *      shutdown is called then (ie ftdi_shutdown)
- */
-static void ftdi_shutdown(struct usb_serial *serial)
-{
-	dbg("%s", __func__);
-}
-
 static void ftdi_sio_priv_release(struct kref *k)
 {
 	struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
@@ -1671,8 +1766,8 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (data_offset > 0) {
 		/* Original sio needs control bytes too... */
 		transfer_size += (data_offset *
-				((count + (PKTSZ - 1 - data_offset)) /
-				 (PKTSZ - data_offset)));
+				((count + (priv->max_packet_size - 1 - data_offset)) /
+				 (priv->max_packet_size - data_offset)));
 	}
 
 	buffer = kmalloc(transfer_size, GFP_ATOMIC);
@@ -1694,7 +1789,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (data_offset > 0) {
 		/* Original sio requires control byte at start of
 		   each packet. */
-		int user_pktsz = PKTSZ - data_offset;
+		int user_pktsz = priv->max_packet_size - data_offset;
 		int todo = count;
 		unsigned char *first_byte = buffer;
 		const unsigned char *current_position = buf;
@@ -1775,11 +1870,6 @@ static void ftdi_write_bulk_callback(struct urb *urb)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (status) {
-		dbg("nonzero write bulk status received: %d", status);
-		return;
-	}
-
 	priv = usb_get_serial_port_data(port);
 	if (!priv) {
 		dbg("%s - bad port private data pointer - exiting", __func__);
@@ -1790,13 +1880,18 @@ static void ftdi_write_bulk_callback(struct urb *urb)
 	data_offset = priv->write_offset;
 	if (data_offset > 0) {
 		/* Subtract the control bytes */
-		countback -= (data_offset * DIV_ROUND_UP(countback, PKTSZ));
+		countback -= (data_offset * DIV_ROUND_UP(countback, priv->max_packet_size));
 	}
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	--priv->tx_outstanding_urbs;
 	priv->tx_outstanding_bytes -= countback;
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
 
+	if (status) {
+		dbg("nonzero write bulk status received: %d", status);
+		return;
+	}
+
 	usb_serial_port_softint(port);
 } /* ftdi_write_bulk_callback */
 
@@ -1892,7 +1987,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 
 	/* count data bytes, but not status bytes */
 	countread = urb->actual_length;
-	countread -= 2 * DIV_ROUND_UP(countread, PKTSZ);
+	countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size);
 	spin_lock_irqsave(&priv->rx_lock, flags);
 	priv->rx_bytes += countread;
 	spin_unlock_irqrestore(&priv->rx_lock, flags);
@@ -1965,7 +2060,7 @@ static void ftdi_process_read(struct work_struct *work)
 
 	need_flip = 0;
 	for (packet_offset = priv->rx_processed;
-		packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+		packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) {
 		int length;
 
 		/* Compare new line status to the old one, signal if different/
@@ -1980,7 +2075,7 @@ static void ftdi_process_read(struct work_struct *work)
 			priv->prev_status = new_status;
 		}
 
-		length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2;
+		length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2;
 		if (length < 0) {
 			dev_err(&port->dev, "%s - bad packet length: %d\n",
 				__func__, length+2);
@@ -2011,6 +2106,7 @@ static void ftdi_process_read(struct work_struct *work)
 		if (data[packet_offset+1] & FTDI_RS_BI) {
 			error_flag = TTY_BREAK;
 			dbg("BREAK received");
+			usb_serial_handle_break(port);
 		}
 		if (data[packet_offset+1] & FTDI_RS_PE) {
 			error_flag = TTY_PARITY;
@@ -2025,8 +2121,11 @@ static void ftdi_process_read(struct work_struct *work)
 				/* Note that the error flag is duplicated for
 				   every character received since we don't know
 				   which character it applied to */
-				tty_insert_flip_char(tty,
-					data[packet_offset + i], error_flag);
+				if (!usb_serial_handle_sysrq_char(port,
+						data[packet_offset + i]))
+					tty_insert_flip_char(tty,
+						data[packet_offset + i],
+						error_flag);
 			}
 			need_flip = 1;
 		}
@@ -2332,6 +2431,8 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 	case FT232BM:
 	case FT2232C:
 	case FT232RL:
+	case FT2232H:
+	case FT4232H:
 		/* the 8U232AM returns a two byte value (the sio is a 1 byte
 		   value) - in the same format as the data returned from the in
 		   point */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 12330fa1c09..f1d440a728a 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -10,7 +10,7 @@
  * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
  * USB on the other.
  *
- * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
+ * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
  * of the protocol required to talk to the device and ongoing assistence
  * during development.
  *
@@ -28,11 +28,15 @@
 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
 #define FTDI_RELAIS_PID	0xFA10  /* Relais device from Rudolf Gugler */
 #define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 #define FTDI_USBX_707_PID 0xF857	/* ADSTech IR Blaster USBX-707 */
 
+/* Larsen and Brusgaard AltiTrack/USBtrack  */
+#define LARSENBRUSGAARD_VID		0x0FD8
+#define LB_ALTITRACK_PID		0x0001
 
 /* www.canusb.com Lawicel CANUSB device */
 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
@@ -873,6 +877,11 @@
 #define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
 #define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
 
+/* Interface indicies for FT2232, FT2232H and FT4232H devices*/
+#define INTERFACE_A		1
+#define INTERFACE_B		2
+#define INTERFACE_C		3
+#define INTERFACE_D		4
 
 /*
  * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
@@ -1036,6 +1045,8 @@ typedef enum {
 	FT232BM = 3,
 	FT2232C = 4,
 	FT232RL = 5,
+	FT2232H = 6,
+	FT4232H = 7
 } ftdi_chip_type_t;
 
 typedef enum {
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index ee25a3fe3b0..8839f1c70b7 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1,7 +1,7 @@
 /*
  * Garmin GPS driver
  *
- * Copyright (C) 2006,2007 Hermann Kneissel herkne@users.sourceforge.net
+ * Copyright (C) 2006-2009 Hermann Kneissel herkne@users.sourceforge.net
  *
  * The latest version of the driver can be found at
  * http://sourceforge.net/projects/garmin-gps/
@@ -51,7 +51,7 @@ static int debug;
  */
 
 #define VERSION_MAJOR	0
-#define VERSION_MINOR	31
+#define VERSION_MINOR	33
 
 #define _STR(s) #s
 #define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b)
@@ -129,7 +129,6 @@ struct garmin_data {
 	__u8   state;
 	__u16  flags;
 	__u8   mode;
-	__u8   ignorePkts;
 	__u8   count;
 	__u8   pkt_id;
 	__u32  serial_num;
@@ -141,8 +140,6 @@ struct garmin_data {
 	__u8   inbuffer [GPS_IN_BUFSIZ];  /* tty -> usb */
 	__u8   outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */
 	__u8   privpkt[4*6];
-	atomic_t req_count;
-	atomic_t resp_count;
 	spinlock_t lock;
 	struct list_head pktlist;
 };
@@ -170,6 +167,8 @@ struct garmin_data {
 #define FLAGS_BULK_IN_ACTIVE      0x0020
 #define FLAGS_BULK_IN_RESTART     0x0010
 #define FLAGS_THROTTLED           0x0008
+#define APP_REQ_SEEN              0x0004
+#define APP_RESP_SEEN             0x0002
 #define CLEAR_HALT_REQUIRED       0x0001
 
 #define FLAGS_QUEUING             0x0100
@@ -184,20 +183,16 @@ struct garmin_data {
 
 
 /* function prototypes */
-static void gsp_next_packet(struct garmin_data *garmin_data_p);
-static int  garmin_write_bulk(struct usb_serial_port *port,
+static int gsp_next_packet(struct garmin_data *garmin_data_p);
+static int garmin_write_bulk(struct usb_serial_port *port,
 			     const unsigned char *buf, int count,
 			     int dismiss_ack);
 
 /* some special packets to be send or received */
 static unsigned char const GARMIN_START_SESSION_REQ[]
 	= { 0, 0, 0, 0,  5, 0, 0, 0, 0, 0, 0, 0 };
-static unsigned char const GARMIN_START_SESSION_REQ2[]
-	= { 0, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
 static unsigned char const GARMIN_START_SESSION_REPLY[]
 	= { 0, 0, 0, 0,  6, 0, 0, 0, 4, 0, 0, 0 };
-static unsigned char const GARMIN_SESSION_ACTIVE_REPLY[]
-	= { 0, 0, 0, 0, 17, 0, 0, 0, 4, 0, 0, 0, 0, 16, 0, 0 };
 static unsigned char const GARMIN_BULK_IN_AVAIL_REPLY[]
 	= { 0, 0, 0, 0,  2, 0, 0, 0, 0, 0, 0, 0 };
 static unsigned char const GARMIN_APP_LAYER_REPLY[]
@@ -233,13 +228,6 @@ static struct usb_driver garmin_driver = {
 };
 
 
-static inline int noResponseFromAppLayer(struct garmin_data *garmin_data_p)
-{
-	return atomic_read(&garmin_data_p->req_count) ==
-				atomic_read(&garmin_data_p->resp_count);
-}
-
-
 static inline int getLayerId(const __u8 *usbPacket)
 {
 	return __le32_to_cpup((__le32 *)(usbPacket));
@@ -325,8 +313,11 @@ static int pkt_add(struct garmin_data *garmin_data_p,
 		state = garmin_data_p->state;
 		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
+		dbg("%s - added: pkt: %d - %d bytes",
+			__func__, pkt->seq, data_length);
+
 		/* in serial mode, if someone is waiting for data from
-		   the device, iconvert and send the next packet to tty. */
+		   the device, convert and send the next packet to tty. */
 		if (result && (state == STATE_GSP_WAIT_DATA))
 			gsp_next_packet(garmin_data_p);
 	}
@@ -411,7 +402,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
 /*
  * called for a complete packet received from tty layer
  *
- * the complete packet (pkzid ... cksum) is in garmin_data_p->inbuf starting
+ * the complete packet (pktid ... cksum) is in garmin_data_p->inbuf starting
  * at GSP_INITIAL_OFFSET.
  *
  * count - number of bytes in the input buffer including space reserved for
@@ -501,7 +492,6 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
 	unsigned long flags;
 	int offs = 0;
 	int ack_or_nak_seen = 0;
-	int i = 0;
 	__u8 *dest;
 	int size;
 	/* dleSeen: set if last byte read was a DLE */
@@ -519,8 +509,8 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
 	skip = garmin_data_p->flags & FLAGS_GSP_SKIP;
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-	dbg("%s - dle=%d skip=%d size=%d count=%d",
-		__func__, dleSeen, skip, size, count);
+	/* dbg("%s - dle=%d skip=%d size=%d count=%d",
+		__func__, dleSeen, skip, size, count); */
 
 	if (size == 0)
 		size = GSP_INITIAL_OFFSET;
@@ -568,7 +558,6 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
 		} else if (!skip) {
 
 			if (dleSeen) {
-				dbg("non-masked DLE at %d - restarting", i);
 				size = GSP_INITIAL_OFFSET;
 				dleSeen = 0;
 			}
@@ -599,19 +588,19 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
 	else
 		garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN;
 
-	if (ack_or_nak_seen)
-		garmin_data_p->state = STATE_GSP_WAIT_DATA;
-
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-	if (ack_or_nak_seen)
-		gsp_next_packet(garmin_data_p);
+	if (ack_or_nak_seen) {
+		if (gsp_next_packet(garmin_data_p) > 0)
+			garmin_data_p->state = STATE_ACTIVE;
+		else
+			garmin_data_p->state = STATE_GSP_WAIT_DATA;
+	}
 	return count;
 }
 
 
 
-
 /*
  * Sends a usb packet to the tty
  *
@@ -733,29 +722,28 @@ static int gsp_send(struct garmin_data *garmin_data_p,
 }
 
 
-
-
-
 /*
  * Process the next pending data packet - if there is one
  */
-static void gsp_next_packet(struct garmin_data *garmin_data_p)
+static int gsp_next_packet(struct garmin_data *garmin_data_p)
 {
+	int result = 0;
 	struct garmin_packet *pkt = NULL;
 
 	while ((pkt = pkt_pop(garmin_data_p)) != NULL) {
 		dbg("%s - next pkt: %d", __func__, pkt->seq);
-		if (gsp_send(garmin_data_p, pkt->data, pkt->size) > 0) {
+		result = gsp_send(garmin_data_p, pkt->data, pkt->size);
+		if (result > 0) {
 			kfree(pkt);
-			return;
+			return result;
 		}
 		kfree(pkt);
 	}
+	return result;
 }
 
 
 
-
 /******************************************************************************
  * garmin native mode
  ******************************************************************************/
@@ -888,14 +876,6 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
 	unsigned long flags;
 	int status = 0;
 
-	struct usb_serial_port *port = garmin_data_p->port;
-
-	if (port != NULL && atomic_read(&garmin_data_p->resp_count)) {
-		/* send a terminate command */
-		status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ,
-					sizeof(GARMIN_STOP_TRANSFER_REQ), 1);
-	}
-
 	/* flush all queued data */
 	pkt_clear(garmin_data_p);
 
@@ -908,16 +888,12 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
 }
 
 
-
-
-
-
 static int garmin_init_session(struct usb_serial_port *port)
 {
-	unsigned long flags;
 	struct usb_serial *serial = port->serial;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	int status = 0;
+	int i = 0;
 
 	if (status == 0) {
 		usb_kill_urb(port->interrupt_in_urb);
@@ -931,30 +907,25 @@ static int garmin_init_session(struct usb_serial_port *port)
 							__func__, status);
 	}
 
+	/*
+	 * using the initialization method from gpsbabel. See comments in
+	 * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles()
+	 */
 	if (status == 0) {
 		dbg("%s - starting session ...", __func__);
 		garmin_data_p->state = STATE_ACTIVE;
-		status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
-					sizeof(GARMIN_START_SESSION_REQ), 0);
-
-		if (status >= 0) {
-
-			spin_lock_irqsave(&garmin_data_p->lock, flags);
-			garmin_data_p->ignorePkts++;
-			spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-			/* not needed, but the win32 driver does it too ... */
+		for (i = 0; i < 3; i++) {
 			status = garmin_write_bulk(port,
-					GARMIN_START_SESSION_REQ2,
-					sizeof(GARMIN_START_SESSION_REQ2), 0);
-			if (status >= 0) {
-				status = 0;
-				spin_lock_irqsave(&garmin_data_p->lock, flags);
-				garmin_data_p->ignorePkts++;
-				spin_unlock_irqrestore(&garmin_data_p->lock,
-									flags);
-			}
+					GARMIN_START_SESSION_REQ,
+					sizeof(GARMIN_START_SESSION_REQ), 0);
+
+			if (status < 0)
+				break;
 		}
+
+		if (status > 0)
+			status = 0;
 	}
 
 	return status;
@@ -962,8 +933,6 @@ static int garmin_init_session(struct usb_serial_port *port)
 
 
 
-
-
 static int garmin_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
@@ -977,8 +946,6 @@ static int garmin_open(struct tty_struct *tty,
 	garmin_data_p->mode  = initial_mode;
 	garmin_data_p->count = 0;
 	garmin_data_p->flags = 0;
-	atomic_set(&garmin_data_p->req_count, 0);
-	atomic_set(&garmin_data_p->resp_count, 0);
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
 	/* shutdown any bulk reads that might be going on */
@@ -1006,6 +973,7 @@ static void garmin_close(struct usb_serial_port *port)
 		return;
 
 	mutex_lock(&port->serial->disc_mutex);
+
 	if (!port->serial->disconnected)
 		garmin_clear(garmin_data_p);
 
@@ -1013,25 +981,17 @@ static void garmin_close(struct usb_serial_port *port)
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->write_urb);
 
-	if (!port->serial->disconnected) {
-		if (noResponseFromAppLayer(garmin_data_p) ||
-		    ((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
-			process_resetdev_request(port);
-			garmin_data_p->state = STATE_RESET;
-		} else {
-			garmin_data_p->state = STATE_DISCONNECTED;
-		}
-	} else {
+	/* keep reset state so we know that we must start a new session */
+	if (garmin_data_p->state != STATE_RESET)
 		garmin_data_p->state = STATE_DISCONNECTED;
-	}
+
 	mutex_unlock(&port->serial->disc_mutex);
 }
 
+
 static void garmin_write_bulk_callback(struct urb *urb)
 {
-	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
 
 	if (port) {
 		struct garmin_data *garmin_data_p =
@@ -1039,20 +999,13 @@ static void garmin_write_bulk_callback(struct urb *urb)
 
 		dbg("%s - port %d", __func__, port->number);
 
-		if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)
-		    && (garmin_data_p->mode == MODE_GARMIN_SERIAL))  {
-			gsp_send_ack(garmin_data_p,
-					((__u8 *)urb->transfer_buffer)[4]);
-		}
+		if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
 
-		if (status) {
-			dbg("%s - nonzero write bulk status received: %d",
-			    __func__, status);
-			spin_lock_irqsave(&garmin_data_p->lock, flags);
-			garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
-			spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+			if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
+				gsp_send_ack(garmin_data_p,
+					((__u8 *)urb->transfer_buffer)[4]);
+			}
 		}
-
 		usb_serial_port_softint(port);
 	}
 
@@ -1108,7 +1061,11 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 	urb->transfer_flags |= URB_ZERO_PACKET;
 
 	if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
-		atomic_inc(&garmin_data_p->req_count);
+
+		spin_lock_irqsave(&garmin_data_p->lock, flags);
+		garmin_data_p->flags |= APP_REQ_SEEN;
+		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
 		if (garmin_data_p->mode == MODE_GARMIN_SERIAL)  {
 			pkt_clear(garmin_data_p);
 			garmin_data_p->state = STATE_GSP_WAIT_DATA;
@@ -1140,6 +1097,9 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	usb_serial_debug_data(debug, &port->dev, __func__, count, buf);
 
+	if (garmin_data_p->state == STATE_RESET)
+		return -EIO;
+
 	/* check for our private packets */
 	if (count >= GARMIN_PKTHDR_LENGTH) {
 		len = PRIVPKTSIZ;
@@ -1184,7 +1144,7 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
 				break;
 
 			case PRIV_PKTID_RESET_REQ:
-				atomic_inc(&garmin_data_p->req_count);
+				process_resetdev_request(port);
 				break;
 
 			case PRIV_PKTID_SET_DEF_MODE:
@@ -1200,8 +1160,6 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
 		}
 	}
 
-	garmin_data_p->ignorePkts = 0;
-
 	if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
 		return gsp_receive(garmin_data_p, buf, count);
 	} else {	/* MODE_NATIVE */
@@ -1224,31 +1182,33 @@ static int garmin_write_room(struct tty_struct *tty)
 static void garmin_read_process(struct garmin_data *garmin_data_p,
 				 unsigned char *data, unsigned data_length)
 {
+	unsigned long flags;
+
 	if (garmin_data_p->flags & FLAGS_DROP_DATA) {
 		/* abort-transfer cmd is actice */
 		dbg("%s - pkt dropped", __func__);
 	} else if (garmin_data_p->state != STATE_DISCONNECTED &&
 		garmin_data_p->state != STATE_RESET) {
 
-		/* remember any appl.layer packets, so we know
-		   if a reset is required or not when closing
-		   the device */
-		if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY,
-				sizeof(GARMIN_APP_LAYER_REPLY))) {
-			atomic_inc(&garmin_data_p->resp_count);
-		}
-
 		/* if throttling is active or postprecessing is required
 		   put the received data in the input queue, otherwise
 		   send it directly to the tty port */
 		if (garmin_data_p->flags & FLAGS_QUEUING) {
 			pkt_add(garmin_data_p, data, data_length);
-		} else if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
-			if (getLayerId(data) == GARMIN_LAYERID_APPL)
+		} else if (getLayerId(data) == GARMIN_LAYERID_APPL) {
+
+			spin_lock_irqsave(&garmin_data_p->lock, flags);
+			garmin_data_p->flags |= APP_RESP_SEEN;
+			spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+			if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
 				pkt_add(garmin_data_p, data, data_length);
-		} else {
-			send_to_tty(garmin_data_p->port, data, data_length);
+			} else {
+				send_to_tty(garmin_data_p->port, data,
+						data_length);
+			}
 		}
+		/* ignore system layer packets ... */
 	}
 }
 
@@ -1363,8 +1323,6 @@ static void garmin_read_int_callback(struct urb *urb)
 			} else {
 				spin_lock_irqsave(&garmin_data_p->lock, flags);
 				garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE;
-				/* do not send this packet to the user */
-				garmin_data_p->ignorePkts = 1;
 				spin_unlock_irqrestore(&garmin_data_p->lock,
 									flags);
 			}
@@ -1391,17 +1349,7 @@ static void garmin_read_int_callback(struct urb *urb)
 			__func__, garmin_data_p->serial_num);
 	}
 
-	if (garmin_data_p->ignorePkts) {
-		/* this reply belongs to a request generated by the driver,
-		   ignore it. */
-		dbg("%s - pkt ignored (%d)",
-			__func__, garmin_data_p->ignorePkts);
-		spin_lock_irqsave(&garmin_data_p->lock, flags);
-		garmin_data_p->ignorePkts--;
-		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
-	} else {
-		garmin_read_process(garmin_data_p, data, urb->actual_length);
-	}
+	garmin_read_process(garmin_data_p, data, urb->actual_length);
 
 	port->interrupt_in_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1527,7 +1475,7 @@ static int garmin_attach(struct usb_serial *serial)
 }
 
 
-static void garmin_shutdown(struct usb_serial *serial)
+static void garmin_disconnect(struct usb_serial *serial)
 {
 	struct usb_serial_port *port = serial->port[0];
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
@@ -1536,8 +1484,17 @@ static void garmin_shutdown(struct usb_serial *serial)
 
 	usb_kill_urb(port->interrupt_in_urb);
 	del_timer_sync(&garmin_data_p->timer);
+}
+
+
+static void garmin_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *port = serial->port[0];
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
+
+	dbg("%s", __func__);
+
 	kfree(garmin_data_p);
-	usb_set_serial_port_data(port, NULL);
 }
 
 
@@ -1556,7 +1513,8 @@ static struct usb_serial_driver garmin_device = {
 	.throttle            = garmin_throttle,
 	.unthrottle          = garmin_unthrottle,
 	.attach              = garmin_attach,
-	.shutdown            = garmin_shutdown,
+	.disconnect          = garmin_disconnect,
+	.release             = garmin_release,
 	.write               = garmin_write,
 	.write_room          = garmin_write_room,
 	.write_bulk_callback = garmin_write_bulk_callback,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index be82ea95672..932d6241b78 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -63,7 +63,8 @@ struct usb_serial_driver usb_serial_generic_device = {
 	.id_table =		generic_device_ids,
 	.usb_driver = 		&generic_driver,
 	.num_ports =		1,
-	.shutdown =		usb_serial_generic_shutdown,
+	.disconnect =		usb_serial_generic_disconnect,
+	.release =		usb_serial_generic_release,
 	.throttle =		usb_serial_generic_throttle,
 	.unthrottle =		usb_serial_generic_unthrottle,
 	.resume =		usb_serial_generic_resume,
@@ -190,6 +191,88 @@ void usb_serial_generic_close(struct usb_serial_port *port)
 	generic_cleanup(port);
 }
 
+static int usb_serial_multi_urb_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
+{
+	unsigned long flags;
+	struct urb *urb;
+	unsigned char *buffer;
+	int status;
+	int towrite;
+	int bwrite = 0;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	if (count == 0)
+		dbg("%s - write request of 0 bytes", __func__);
+
+	while (count > 0) {
+		towrite = (count > port->bulk_out_size) ?
+			port->bulk_out_size : count;
+		spin_lock_irqsave(&port->lock, flags);
+		if (port->urbs_in_flight >
+		    port->serial->type->max_in_flight_urbs) {
+			spin_unlock_irqrestore(&port->lock, flags);
+			dbg("%s - write limit hit\n", __func__);
+			return bwrite;
+		}
+		port->tx_bytes_flight += towrite;
+		port->urbs_in_flight++;
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		buffer = kmalloc(towrite, GFP_ATOMIC);
+		if (!buffer) {
+			dev_err(&port->dev,
+			"%s ran out of kernel memory for urb ...\n", __func__);
+			goto error_no_buffer;
+		}
+
+		urb = usb_alloc_urb(0, GFP_ATOMIC);
+		if (!urb) {
+			dev_err(&port->dev, "%s - no more free urbs\n",
+				__func__);
+			goto error_no_urb;
+		}
+
+		/* Copy data */
+		memcpy(buffer, buf + bwrite, towrite);
+		usb_serial_debug_data(debug, &port->dev, __func__,
+				      towrite, buffer);
+		/* fill the buffer and send it */
+		usb_fill_bulk_urb(urb, port->serial->dev,
+			usb_sndbulkpipe(port->serial->dev,
+					port->bulk_out_endpointAddress),
+			buffer, towrite,
+			usb_serial_generic_write_bulk_callback, port);
+
+		status = usb_submit_urb(urb, GFP_ATOMIC);
+		if (status) {
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
+				__func__, status);
+			goto error;
+		}
+
+		/* This urb is the responsibility of the host driver now */
+		usb_free_urb(urb);
+		dbg("%s write: %d", __func__, towrite);
+		count -= towrite;
+		bwrite += towrite;
+	}
+	return bwrite;
+
+error:
+	usb_free_urb(urb);
+error_no_urb:
+	kfree(buffer);
+error_no_buffer:
+	spin_lock_irqsave(&port->lock, flags);
+	port->urbs_in_flight--;
+	port->tx_bytes_flight -= towrite;
+	spin_unlock_irqrestore(&port->lock, flags);
+	return bwrite;
+}
+
 int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
@@ -207,6 +290,11 @@ int usb_serial_generic_write(struct tty_struct *tty,
 	/* only do something if we have a bulk out endpoint */
 	if (serial->num_bulk_out) {
 		unsigned long flags;
+
+		if (serial->type->max_in_flight_urbs)
+			return usb_serial_multi_urb_write(tty, port,
+							  buf, count);
+
 		spin_lock_irqsave(&port->lock, flags);
 		if (port->write_urb_busy) {
 			spin_unlock_irqrestore(&port->lock, flags);
@@ -252,20 +340,26 @@ int usb_serial_generic_write(struct tty_struct *tty,
 	/* no bulk out, so return 0 bytes written */
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_write);
 
 int usb_serial_generic_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
+	unsigned long flags;
 	int room = 0;
 
 	dbg("%s - port %d", __func__, port->number);
-
-	/* FIXME: Locking */
-	if (serial->num_bulk_out) {
-		if (!(port->write_urb_busy))
-			room = port->bulk_out_size;
+	spin_lock_irqsave(&port->lock, flags);
+	if (serial->type->max_in_flight_urbs) {
+		if (port->urbs_in_flight < serial->type->max_in_flight_urbs)
+			room = port->bulk_out_size *
+				(serial->type->max_in_flight_urbs -
+				 port->urbs_in_flight);
+	} else if (serial->num_bulk_out && !(port->write_urb_busy)) {
+		room = port->bulk_out_size;
 	}
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
 	return room;
@@ -276,11 +370,16 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int chars = 0;
+	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* FIXME: Locking */
-	if (serial->num_bulk_out) {
+	if (serial->type->max_in_flight_urbs) {
+		spin_lock_irqsave(&port->lock, flags);
+		chars = port->tx_bytes_flight;
+		spin_unlock_irqrestore(&port->lock, flags);
+	} else if (serial->num_bulk_out) {
+		/* FIXME: Locking */
 		if (port->write_urb_busy)
 			chars = port->write_urb->transfer_buffer_length;
 	}
@@ -290,7 +389,8 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 }
 
 
-static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
+void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
+			gfp_t mem_flags)
 {
 	struct urb *urb = port->read_urb;
 	struct usb_serial *serial = port->serial;
@@ -311,25 +411,28 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
 			"%s - failed resubmitting read urb, error %d\n",
 							__func__, result);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_resubmit_read_urb);
 
 /* Push data to tty layer and resubmit the bulk read URB */
 static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 {
 	struct urb *urb = port->read_urb;
 	struct tty_struct *tty = tty_port_tty_get(&port->port);
-	int room;
+	char *ch = (char *)urb->transfer_buffer;
+	int i;
+
+	if (!tty)
+		goto done;
 
 	/* Push data to tty */
-	if (tty && urb->actual_length) {
-		room = tty_buffer_request_room(tty, urb->actual_length);
-		if (room) {
-			tty_insert_flip_string(tty, urb->transfer_buffer, room);
-			tty_flip_buffer_push(tty);
-		}
+	for (i = 0; i < urb->actual_length; i++, ch++) {
+		if (!usb_serial_handle_sysrq_char(port, *ch))
+			tty_insert_flip_char(tty, *ch, TTY_NORMAL);
 	}
+	tty_flip_buffer_push(tty);
 	tty_kref_put(tty);
-
-	resubmit_read_urb(port, GFP_ATOMIC);
+done:
+	usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
 }
 
 void usb_serial_generic_read_bulk_callback(struct urb *urb)
@@ -363,12 +466,24 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
 void usb_serial_generic_write_bulk_callback(struct urb *urb)
 {
+	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	port->write_urb_busy = 0;
+	if (port->serial->type->max_in_flight_urbs) {
+		spin_lock_irqsave(&port->lock, flags);
+		--port->urbs_in_flight;
+		port->tx_bytes_flight -= urb->transfer_buffer_length;
+		if (port->urbs_in_flight < 0)
+			port->urbs_in_flight = 0;
+		spin_unlock_irqrestore(&port->lock, flags);
+	} else {
+		/* Handle the case for single urb mode */
+		port->write_urb_busy = 0;
+	}
+
 	if (status) {
 		dbg("%s - nonzero write bulk status received: %d",
 		    __func__, status);
@@ -408,11 +523,36 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
 
 	if (was_throttled) {
 		/* Resume reading from device */
-		resubmit_read_urb(port, GFP_KERNEL);
+		usb_serial_generic_resubmit_read_urb(port, GFP_KERNEL);
+	}
+}
+
+int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
+{
+	if (port->sysrq && port->console) {
+		if (ch && time_before(jiffies, port->sysrq)) {
+			handle_sysrq(ch, tty_port_tty_get(&port->port));
+			port->sysrq = 0;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_sysrq_char);
+
+int usb_serial_handle_break(struct usb_serial_port *port)
+{
+	if (!port->sysrq) {
+		port->sysrq = jiffies + HZ*5;
+		return 1;
 	}
+	port->sysrq = 0;
+	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_serial_handle_break);
 
-void usb_serial_generic_shutdown(struct usb_serial *serial)
+void usb_serial_generic_disconnect(struct usb_serial *serial)
 {
 	int i;
 
@@ -423,3 +563,7 @@ void usb_serial_generic_shutdown(struct usb_serial *serial)
 		generic_cleanup(serial->port[i]);
 }
 
+void usb_serial_generic_release(struct usb_serial *serial)
+{
+	dbg("%s", __func__);
+}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 53ef5996e33..0191693625d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -224,7 +224,8 @@ static int  edge_tiocmget(struct tty_struct *tty, struct file *file);
 static int  edge_tiocmset(struct tty_struct *tty, struct file *file,
 					unsigned int set, unsigned int clear);
 static int  edge_startup(struct usb_serial *serial);
-static void edge_shutdown(struct usb_serial *serial);
+static void edge_disconnect(struct usb_serial *serial);
+static void edge_release(struct usb_serial *serial);
 
 #include "io_tables.h"	/* all of the devices that this driver supports */
 
@@ -3193,21 +3194,16 @@ static int edge_startup(struct usb_serial *serial)
 
 
 /****************************************************************************
- * edge_shutdown
+ * edge_disconnect
  *	This function is called whenever the device is removed from the usb bus.
  ****************************************************************************/
-static void edge_shutdown(struct usb_serial *serial)
+static void edge_disconnect(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
-	int i;
 
 	dbg("%s", __func__);
 
 	/* stop reads and writes on all ports */
-	for (i = 0; i < serial->num_ports; ++i) {
-		kfree(usb_get_serial_port_data(serial->port[i]));
-		usb_set_serial_port_data(serial->port[i],  NULL);
-	}
 	/* free up our endpoint stuff */
 	if (edge_serial->is_epic) {
 		usb_kill_urb(edge_serial->interrupt_read_urb);
@@ -3218,9 +3214,24 @@ static void edge_shutdown(struct usb_serial *serial)
 		usb_free_urb(edge_serial->read_urb);
 		kfree(edge_serial->bulk_in_buffer);
 	}
+}
+
+
+/****************************************************************************
+ * edge_release
+ *	This function is called when the device structure is deallocated.
+ ****************************************************************************/
+static void edge_release(struct usb_serial *serial)
+{
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+	int i;
+
+	dbg("%s", __func__);
+
+	for (i = 0; i < serial->num_ports; ++i)
+		kfree(usb_get_serial_port_data(serial->port[i]));
 
 	kfree(edge_serial);
-	usb_set_serial_data(serial, NULL);
 }
 
 
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 7eb9d67b81b..9241d314751 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -117,7 +117,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.throttle		= edge_throttle,
 	.unthrottle		= edge_unthrottle,
 	.attach			= edge_startup,
-	.shutdown		= edge_shutdown,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -145,7 +146,8 @@ static struct usb_serial_driver edgeport_4port_device = {
 	.throttle		= edge_throttle,
 	.unthrottle		= edge_unthrottle,
 	.attach			= edge_startup,
-	.shutdown		= edge_shutdown,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -173,7 +175,8 @@ static struct usb_serial_driver edgeport_8port_device = {
 	.throttle		= edge_throttle,
 	.unthrottle		= edge_unthrottle,
 	.attach			= edge_startup,
-	.shutdown		= edge_shutdown,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -200,7 +203,8 @@ static struct usb_serial_driver epic_device = {
 	.throttle		= edge_throttle,
 	.unthrottle		= edge_unthrottle,
 	.attach			= edge_startup,
-	.shutdown		= edge_shutdown,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index eabf20eeb37..e8bc42f92e7 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -102,7 +102,7 @@ struct edgeport_port {
 	__u8 shadow_mcr;
 	__u8 shadow_lsr;
 	__u8 lsr_mask;
-	__u32 ump_read_timeout;		/* Number of miliseconds the UMP will
+	__u32 ump_read_timeout;		/* Number of milliseconds the UMP will
 					   wait without data before completing
 					   a read short */
 	int baud_rate;
@@ -2663,7 +2663,7 @@ cleanup:
 	return -ENOMEM;
 }
 
-static void edge_shutdown(struct usb_serial *serial)
+static void edge_disconnect(struct usb_serial *serial)
 {
 	int i;
 	struct edgeport_port *edge_port;
@@ -2673,12 +2673,22 @@ static void edge_shutdown(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		edge_port = usb_get_serial_port_data(serial->port[i]);
 		edge_remove_sysfs_attrs(edge_port->port);
+	}
+}
+
+static void edge_release(struct usb_serial *serial)
+{
+	int i;
+	struct edgeport_port *edge_port;
+
+	dbg("%s", __func__);
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		edge_port = usb_get_serial_port_data(serial->port[i]);
 		edge_buf_free(edge_port->ep_out_buf);
 		kfree(edge_port);
-		usb_set_serial_port_data(serial->port[i], NULL);
 	}
 	kfree(usb_get_serial_data(serial));
-	usb_set_serial_data(serial, NULL);
 }
 
 
@@ -2915,7 +2925,8 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.throttle		= edge_throttle,
 	.unthrottle		= edge_unthrottle,
 	.attach			= edge_startup,
-	.shutdown		= edge_shutdown,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
@@ -2944,7 +2955,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.throttle		= edge_throttle,
 	.unthrottle		= edge_unthrottle,
 	.attach			= edge_startup,
-	.shutdown		= edge_shutdown,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index c610a99fa47..2545d45ce16 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -79,7 +79,6 @@ static int  ipaq_open(struct tty_struct *tty,
 static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
-static void ipaq_shutdown(struct usb_serial *serial);
 static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static int ipaq_write_bulk(struct usb_serial_port *port,
@@ -576,7 +575,6 @@ static struct usb_serial_driver ipaq_device = {
 	.close =		ipaq_close,
 	.attach =		ipaq_startup,
 	.calc_num_ports =	ipaq_calc_num_ports,
-	.shutdown =		ipaq_shutdown,
 	.write =		ipaq_write,
 	.write_room =		ipaq_write_room,
 	.chars_in_buffer =	ipaq_chars_in_buffer,
@@ -990,11 +988,6 @@ static int ipaq_startup(struct usb_serial *serial)
 	return usb_reset_configuration(serial->dev);
 }
 
-static void ipaq_shutdown(struct usb_serial *serial)
-{
-	dbg("%s", __func__);
-}
-
 static int __init ipaq_init(void)
 {
 	int retval;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 76a3cc327bb..96873a7a32b 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -121,8 +121,8 @@ static int iuu_startup(struct usb_serial *serial)
 	return 0;
 }
 
-/* Shutdown function */
-static void iuu_shutdown(struct usb_serial *serial)
+/* Release function */
+static void iuu_release(struct usb_serial *serial)
 {
 	struct usb_serial_port *port = serial->port[0];
 	struct iuu_private *priv = usb_get_serial_port_data(port);
@@ -1202,7 +1202,7 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
 	.attach = iuu_startup,
-	.shutdown = iuu_shutdown,
+	.release = iuu_release,
 };
 
 static int __init iuu_init(void)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f1195a98f31..2594b8743d3 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2689,7 +2689,7 @@ static int keyspan_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void keyspan_shutdown(struct usb_serial *serial)
+static void keyspan_disconnect(struct usb_serial *serial)
 {
 	int				i, j;
 	struct usb_serial_port		*port;
@@ -2729,6 +2729,17 @@ static void keyspan_shutdown(struct usb_serial *serial)
 			usb_free_urb(p_priv->out_urbs[j]);
 		}
 	}
+}
+
+static void keyspan_release(struct usb_serial *serial)
+{
+	int				i;
+	struct usb_serial_port		*port;
+	struct keyspan_serial_private 	*s_priv;
+
+	dbg("%s", __func__);
+
+	s_priv = usb_get_serial_data(serial);
 
 	/*  dbg("Freeing serial->private."); */
 	kfree(s_priv);
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 0d4569b6076..3107ed15af6 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -41,7 +41,8 @@ static int  keyspan_open		(struct tty_struct *tty,
 static void keyspan_close		(struct usb_serial_port *port);
 static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);
-static void keyspan_shutdown		(struct usb_serial *serial);
+static void keyspan_disconnect		(struct usb_serial *serial);
+static void keyspan_release		(struct usb_serial *serial);
 static int  keyspan_write_room		(struct tty_struct *tty);
 
 static int  keyspan_write		(struct tty_struct *tty,
@@ -569,7 +570,8 @@ static struct usb_serial_driver keyspan_1port_device = {
 	.tiocmget		= keyspan_tiocmget,
 	.tiocmset		= keyspan_tiocmset,
 	.attach			= keyspan_startup,
-	.shutdown		= keyspan_shutdown,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
 };
 
 static struct usb_serial_driver keyspan_2port_device = {
@@ -590,7 +592,8 @@ static struct usb_serial_driver keyspan_2port_device = {
 	.tiocmget		= keyspan_tiocmget,
 	.tiocmset		= keyspan_tiocmset,
 	.attach			= keyspan_startup,
-	.shutdown		= keyspan_shutdown,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
 };
 
 static struct usb_serial_driver keyspan_4port_device = {
@@ -611,7 +614,8 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.tiocmget		= keyspan_tiocmget,
 	.tiocmset		= keyspan_tiocmset,
 	.attach			= keyspan_startup,
-	.shutdown		= keyspan_shutdown,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
 };
 
 #endif
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index ab769dbea1b..d0b12e40c2b 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -809,7 +809,7 @@ static int keyspan_pda_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void keyspan_pda_shutdown(struct usb_serial *serial)
+static void keyspan_pda_release(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
 
@@ -869,7 +869,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.tiocmget =		keyspan_pda_tiocmget,
 	.tiocmset =		keyspan_pda_tiocmset,
 	.attach =		keyspan_pda_startup,
-	.shutdown =		keyspan_pda_shutdown,
+	.release =		keyspan_pda_release,
 };
 
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fa817c66b3e..0f44bb8e8d4 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -73,7 +73,8 @@ static int debug;
  * Function prototypes
  */
 static int  klsi_105_startup(struct usb_serial *serial);
-static void klsi_105_shutdown(struct usb_serial *serial);
+static void klsi_105_disconnect(struct usb_serial *serial);
+static void klsi_105_release(struct usb_serial *serial);
 static int  klsi_105_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static void klsi_105_close(struct usb_serial_port *port);
@@ -131,7 +132,8 @@ static struct usb_serial_driver kl5kusb105d_device = {
 	.tiocmget =          klsi_105_tiocmget,
 	.tiocmset =          klsi_105_tiocmset,
 	.attach =	     klsi_105_startup,
-	.shutdown =	     klsi_105_shutdown,
+	.disconnect =	     klsi_105_disconnect,
+	.release =	     klsi_105_release,
 	.throttle =	     klsi_105_throttle,
 	.unthrottle =	     klsi_105_unthrottle,
 };
@@ -315,7 +317,7 @@ err_cleanup:
 } /* klsi_105_startup */
 
 
-static void klsi_105_shutdown(struct usb_serial *serial)
+static void klsi_105_disconnect(struct usb_serial *serial)
 {
 	int i;
 
@@ -325,33 +327,36 @@ static void klsi_105_shutdown(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		struct klsi_105_private *priv =
 				usb_get_serial_port_data(serial->port[i]);
-		unsigned long flags;
 
 		if (priv) {
 			/* kill our write urb pool */
 			int j;
 			struct urb **write_urbs = priv->write_urb_pool;
-			spin_lock_irqsave(&priv->lock, flags);
 
 			for (j = 0; j < NUM_URBS; j++) {
 				if (write_urbs[j]) {
-					/* FIXME - uncomment the following
-					 * usb_kill_urb call when the host
-					 * controllers get fixed to set
-					 * urb->dev = NULL after the urb is
-					 * finished.  Otherwise this call
-					 * oopses. */
-					/* usb_kill_urb(write_urbs[j]); */
-					kfree(write_urbs[j]->transfer_buffer);
+					usb_kill_urb(write_urbs[j]);
 					usb_free_urb(write_urbs[j]);
 				}
 			}
-			spin_unlock_irqrestore(&priv->lock, flags);
-			kfree(priv);
-			usb_set_serial_port_data(serial->port[i], NULL);
 		}
 	}
-} /* klsi_105_shutdown */
+} /* klsi_105_disconnect */
+
+
+static void klsi_105_release(struct usb_serial *serial)
+{
+	int i;
+
+	dbg("%s", __func__);
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		struct klsi_105_private *priv =
+				usb_get_serial_port_data(serial->port[i]);
+
+		kfree(priv);
+	}
+} /* klsi_105_release */
 
 static int  klsi_105_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6b570498287..6db0e561f68 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -69,7 +69,7 @@ static int debug;
 
 /* Function prototypes */
 static int  kobil_startup(struct usb_serial *serial);
-static void kobil_shutdown(struct usb_serial *serial);
+static void kobil_release(struct usb_serial *serial);
 static int  kobil_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static void kobil_close(struct usb_serial_port *port);
@@ -117,7 +117,7 @@ static struct usb_serial_driver kobil_device = {
 	.id_table =		id_table,
 	.num_ports =		1,
 	.attach =		kobil_startup,
-	.shutdown =		kobil_shutdown,
+	.release =		kobil_release,
 	.ioctl =		kobil_ioctl,
 	.set_termios =		kobil_set_termios,
 	.tiocmget =		kobil_tiocmget,
@@ -201,17 +201,13 @@ static int kobil_startup(struct usb_serial *serial)
 }
 
 
-static void kobil_shutdown(struct usb_serial *serial)
+static void kobil_release(struct usb_serial *serial)
 {
 	int i;
 	dbg("%s - port %d", __func__, serial->port[0]->number);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		while (serial->port[i]->port.count > 0)
-			kobil_close(serial->port[i]);
+	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
 }
 
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 873795548fc..d8825e159aa 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -92,7 +92,7 @@ static int debug;
  * Function prototypes
  */
 static int  mct_u232_startup(struct usb_serial *serial);
-static void mct_u232_shutdown(struct usb_serial *serial);
+static void mct_u232_release(struct usb_serial *serial);
 static int  mct_u232_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static void mct_u232_close(struct usb_serial_port *port);
@@ -149,7 +149,7 @@ static struct usb_serial_driver mct_u232_device = {
 	.tiocmget =	     mct_u232_tiocmget,
 	.tiocmset =	     mct_u232_tiocmset,
 	.attach =	     mct_u232_startup,
-	.shutdown =	     mct_u232_shutdown,
+	.release =	     mct_u232_release,
 };
 
 
@@ -407,7 +407,7 @@ static int mct_u232_startup(struct usb_serial *serial)
 } /* mct_u232_startup */
 
 
-static void mct_u232_shutdown(struct usb_serial *serial)
+static void mct_u232_release(struct usb_serial *serial)
 {
 	struct mct_u232_private *priv;
 	int i;
@@ -417,12 +417,9 @@ static void mct_u232_shutdown(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		/* My special items, the standard routines free my urbs */
 		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			usb_set_serial_port_data(serial->port[i], NULL);
-			kfree(priv);
-		}
+		kfree(priv);
 	}
-} /* mct_u232_shutdown */
+} /* mct_u232_release */
 
 static int  mct_u232_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 9e1a013ee7f..bfc5ce000ef 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1521,19 +1521,16 @@ static int mos7720_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void mos7720_shutdown(struct usb_serial *serial)
+static void mos7720_release(struct usb_serial *serial)
 {
 	int i;
 
 	/* free private structure allocated for serial port */
-	for (i = 0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
 
 	/* free private structure allocated for serial device */
 	kfree(usb_get_serial_data(serial));
-	usb_set_serial_data(serial, NULL);
 }
 
 static struct usb_driver usb_driver = {
@@ -1558,7 +1555,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.throttle		= mos7720_throttle,
 	.unthrottle		= mos7720_unthrottle,
 	.attach			= mos7720_startup,
-	.shutdown		= mos7720_shutdown,
+	.release		= mos7720_release,
 	.ioctl			= mos7720_ioctl,
 	.set_termios		= mos7720_set_termios,
 	.write			= mos7720_write,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 10b78a37214..c40f95c1951 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -238,7 +238,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
 {
 	struct usb_device *dev = port->serial->dev;
 	val = val & 0x00ff;
-	dbg("mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
+	dbg("mos7840_set_reg_sync offset is %x, value %x", reg, val);
 
 	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
 			       MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -260,7 +260,7 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
 			      MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
-	dbg("mos7840_get_reg_sync offset is %x, return val %x\n", reg, *val);
+	dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
 	*val = (*val) & 0x00ff;
 	return ret;
 }
@@ -282,18 +282,18 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
 	if (port->serial->num_ports == 4) {
 		val |= (((__u16) port->number -
 				(__u16) (port->serial->minor)) + 1) << 8;
-		dbg("mos7840_set_uart_reg application number is %x\n", val);
+		dbg("mos7840_set_uart_reg application number is %x", val);
 	} else {
 		if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
 			val |= (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 1) << 8;
-			dbg("mos7840_set_uart_reg application number is %x\n",
+			dbg("mos7840_set_uart_reg application number is %x",
 			    val);
 		} else {
 			val |=
 			    (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 2) << 8;
-			dbg("mos7840_set_uart_reg application number is %x\n",
+			dbg("mos7840_set_uart_reg application number is %x",
 			    val);
 		}
 	}
@@ -315,24 +315,24 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 	int ret = 0;
 	__u16 Wval;
 
-	/* dbg("application number is %4x \n",
+	/* dbg("application number is %4x",
 	    (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
 	/* Wval  is same as application number */
 	if (port->serial->num_ports == 4) {
 		Wval =
 		    (((__u16) port->number - (__u16) (port->serial->minor)) +
 		     1) << 8;
-		dbg("mos7840_get_uart_reg application number is %x\n", Wval);
+		dbg("mos7840_get_uart_reg application number is %x", Wval);
 	} else {
 		if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
 			Wval = (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 1) << 8;
-			dbg("mos7840_get_uart_reg application number is %x\n",
+			dbg("mos7840_get_uart_reg application number is %x",
 			    Wval);
 		} else {
 			Wval = (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 2) << 8;
-			dbg("mos7840_get_uart_reg application number is %x\n",
+			dbg("mos7840_get_uart_reg application number is %x",
 			    Wval);
 		}
 	}
@@ -346,11 +346,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 static void mos7840_dump_serial_port(struct moschip_port *mos7840_port)
 {
 
-	dbg("***************************************\n");
-	dbg("SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
-	dbg("ControlRegOffset is %2x \n", mos7840_port->ControlRegOffset);
-	dbg("DCRRegOffset is %2x \n", mos7840_port->DcrRegOffset);
-	dbg("***************************************\n");
+	dbg("***************************************");
+	dbg("SpRegOffset is %2x", mos7840_port->SpRegOffset);
+	dbg("ControlRegOffset is %2x", mos7840_port->ControlRegOffset);
+	dbg("DCRRegOffset is %2x", mos7840_port->DcrRegOffset);
+	dbg("***************************************");
 
 }
 
@@ -474,12 +474,12 @@ static void mos7840_control_callback(struct urb *urb)
 		goto exit;
 	}
 
-	dbg("%s urb buffer size is %d\n", __func__, urb->actual_length);
-	dbg("%s mos7840_port->MsrLsr is %d port %d\n", __func__,
+	dbg("%s urb buffer size is %d", __func__, urb->actual_length);
+	dbg("%s mos7840_port->MsrLsr is %d port %d", __func__,
 	    mos7840_port->MsrLsr, mos7840_port->port_num);
 	data = urb->transfer_buffer;
 	regval = (__u8) data[0];
-	dbg("%s data is %x\n", __func__, regval);
+	dbg("%s data is %x", __func__, regval);
 	if (mos7840_port->MsrLsr == 0)
 		mos7840_handle_new_msr(mos7840_port, regval);
 	else if (mos7840_port->MsrLsr == 1)
@@ -538,7 +538,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
 	__u16 wval, wreg = 0;
 	int status = urb->status;
 
-	dbg("%s", " : Entering\n");
+	dbg("%s", " : Entering");
 
 	switch (status) {
 	case 0:
@@ -570,7 +570,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
 	 * Byte 5 FIFO status for both */
 
 	if (length && length > 5) {
-		dbg("%s \n", "Wrong data !!!");
+		dbg("%s", "Wrong data !!!");
 		return;
 	}
 
@@ -587,17 +587,17 @@ static void mos7840_interrupt_callback(struct urb *urb)
 		      (__u16) (serial->minor)) + 1) << 8;
 		if (mos7840_port->open) {
 			if (sp[i] & 0x01) {
-				dbg("SP%d No Interrupt !!!\n", i);
+				dbg("SP%d No Interrupt !!!", i);
 			} else {
 				switch (sp[i] & 0x0f) {
 				case SERIAL_IIR_RLS:
 					dbg("Serial Port %d: Receiver status error or ", i);
-					dbg("address bit detected in 9-bit mode\n");
+					dbg("address bit detected in 9-bit mode");
 					mos7840_port->MsrLsr = 1;
 					wreg = LINE_STATUS_REGISTER;
 					break;
 				case SERIAL_IIR_MS:
-					dbg("Serial Port %d: Modem status change\n", i);
+					dbg("Serial Port %d: Modem status change", i);
 					mos7840_port->MsrLsr = 0;
 					wreg = MODEM_STATUS_REGISTER;
 					break;
@@ -689,7 +689,7 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 
 	mos7840_port = urb->context;
 	if (!mos7840_port) {
-		dbg("%s", "NULL mos7840_port pointer \n");
+		dbg("%s", "NULL mos7840_port pointer");
 		mos7840_port->read_urb_busy = false;
 		return;
 	}
@@ -702,41 +702,41 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 
 	port = (struct usb_serial_port *)mos7840_port->port;
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed \n");
+		dbg("%s", "Port Paranoia failed");
 		mos7840_port->read_urb_busy = false;
 		return;
 	}
 
 	serial = mos7840_get_usb_serial(port, __func__);
 	if (!serial) {
-		dbg("%s\n", "Bad serial pointer ");
+		dbg("%s", "Bad serial pointer");
 		mos7840_port->read_urb_busy = false;
 		return;
 	}
 
-	dbg("%s\n", "Entering... \n");
+	dbg("%s", "Entering... ");
 
 	data = urb->transfer_buffer;
 
-	dbg("%s", "Entering ........... \n");
+	dbg("%s", "Entering ...........");
 
 	if (urb->actual_length) {
 		tty = tty_port_tty_get(&mos7840_port->port->port);
 		if (tty) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
-			dbg(" %s \n", data);
+			dbg(" %s ", data);
 			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		}
 		mos7840_port->icount.rx += urb->actual_length;
 		smp_wmb();
-		dbg("mos7840_port->icount.rx is %d:\n",
+		dbg("mos7840_port->icount.rx is %d:",
 		    mos7840_port->icount.rx);
 	}
 
 	if (!mos7840_port->read_urb) {
-		dbg("%s", "URB KILLED !!!\n");
+		dbg("%s", "URB KILLED !!!");
 		mos7840_port->read_urb_busy = false;
 		return;
 	}
@@ -777,16 +777,16 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 	spin_unlock(&mos7840_port->pool_lock);
 
 	if (status) {
-		dbg("nonzero write bulk status received:%d\n", status);
+		dbg("nonzero write bulk status received:%d", status);
 		return;
 	}
 
 	if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) {
-		dbg("%s", "Port Paranoia failed \n");
+		dbg("%s", "Port Paranoia failed");
 		return;
 	}
 
-	dbg("%s \n", "Entering .........");
+	dbg("%s", "Entering .........");
 
 	tty = tty_port_tty_get(&mos7840_port->port->port);
 	if (tty && mos7840_port->open)
@@ -830,15 +830,17 @@ static int mos7840_open(struct tty_struct *tty,
 	struct moschip_port *mos7840_port;
 	struct moschip_port *port0;
 
+	dbg ("%s enter", __func__);
+
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed \n");
+		dbg("%s", "Port Paranoia failed");
 		return -ENODEV;
 	}
 
 	serial = port->serial;
 
 	if (mos7840_serial_paranoia_check(serial, __func__)) {
-		dbg("%s", "Serial Paranoia failed \n");
+		dbg("%s", "Serial Paranoia failed");
 		return -ENODEV;
 	}
 
@@ -891,20 +893,20 @@ static int mos7840_open(struct tty_struct *tty,
 	Data = 0x0;
 	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 	if (status < 0) {
-		dbg("Reading Spreg failed\n");
+		dbg("Reading Spreg failed");
 		return -1;
 	}
 	Data |= 0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
-		dbg("writing Spreg failed\n");
+		dbg("writing Spreg failed");
 		return -1;
 	}
 
 	Data &= ~0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
-		dbg("writing Spreg failed\n");
+		dbg("writing Spreg failed");
 		return -1;
 	}
 	/* End of block to be checked */
@@ -913,7 +915,7 @@ static int mos7840_open(struct tty_struct *tty,
 	status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
 									&Data);
 	if (status < 0) {
-		dbg("Reading Controlreg failed\n");
+		dbg("Reading Controlreg failed");
 		return -1;
 	}
 	Data |= 0x08;		/* Driver done bit */
@@ -921,7 +923,7 @@ static int mos7840_open(struct tty_struct *tty,
 	status = mos7840_set_reg_sync(port,
 				mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
-		dbg("writing Controlreg failed\n");
+		dbg("writing Controlreg failed");
 		return -1;
 	}
 	/* do register settings here */
@@ -932,21 +934,21 @@ static int mos7840_open(struct tty_struct *tty,
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 	if (status < 0) {
-		dbg("disableing interrupts failed\n");
+		dbg("disabling interrupts failed");
 		return -1;
 	}
 	/* Set FIFO_CONTROL_REGISTER to the default value */
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed\n");
+		dbg("Writing FIFO_CONTROL_REGISTER  failed");
 		return -1;
 	}
 
 	Data = 0xcf;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed\n");
+		dbg("Writing FIFO_CONTROL_REGISTER  failed");
 		return -1;
 	}
 
@@ -1043,12 +1045,12 @@ static int mos7840_open(struct tty_struct *tty,
 	 * (can't set it up in mos7840_startup as the  *
 	 * structures were not set up at that time.)   */
 
-	dbg("port number is %d \n", port->number);
-	dbg("serial number is %d \n", port->serial->minor);
-	dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress);
-	dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress);
-	dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress);
-	dbg("port's number in the device is %d\n", mos7840_port->port_num);
+	dbg("port number is %d", port->number);
+	dbg("serial number is %d", port->serial->minor);
+	dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
+	dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
+	dbg("Interrupt endpoint is %d", port->interrupt_in_endpointAddress);
+	dbg("port's number in the device is %d", mos7840_port->port_num);
 	mos7840_port->read_urb = port->read_urb;
 
 	/* set up our bulk in urb */
@@ -1061,7 +1063,7 @@ static int mos7840_open(struct tty_struct *tty,
 			  mos7840_port->read_urb->transfer_buffer_length,
 			  mos7840_bulk_in_callback, mos7840_port);
 
-	dbg("mos7840_open: bulkin endpoint is %d\n",
+	dbg("mos7840_open: bulkin endpoint is %d",
 	    port->bulk_in_endpointAddress);
 	mos7840_port->read_urb_busy = true;
 	response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
@@ -1087,9 +1089,11 @@ static int mos7840_open(struct tty_struct *tty,
 	mos7840_port->icount.tx = 0;
 	mos7840_port->icount.rx = 0;
 
-	dbg("\n\nusb_serial serial:%p       mos7840_port:%p\n      usb_serial_port port:%p\n\n",
+	dbg("usb_serial serial:%p       mos7840_port:%p\n      usb_serial_port port:%p",
 				serial, mos7840_port, port);
 
+	dbg ("%s leave", __func__);
+
 	return 0;
 
 }
@@ -1112,16 +1116,16 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
 
-	dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
+	dbg("%s", " mos7840_chars_in_buffer:entering ...........");
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
+		dbg("%s", "Invalid port");
 		return 0;
 	}
 
 	mos7840_port = mos7840_get_port_private(port);
 	if (mos7840_port == NULL) {
-		dbg("%s \n", "mos7840_break:leaving ...........");
+		dbg("%s", "mos7840_break:leaving ...........");
 		return 0;
 	}
 
@@ -1148,16 +1152,16 @@ static void mos7840_close(struct usb_serial_port *port)
 	int j;
 	__u16 Data;
 
-	dbg("%s\n", "mos7840_close:entering...");
+	dbg("%s", "mos7840_close:entering...");
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed \n");
+		dbg("%s", "Port Paranoia failed");
 		return;
 	}
 
 	serial = mos7840_get_usb_serial(port, __func__);
 	if (!serial) {
-		dbg("%s", "Serial Paranoia failed \n");
+		dbg("%s", "Serial Paranoia failed");
 		return;
 	}
 
@@ -1185,27 +1189,27 @@ static void mos7840_close(struct usb_serial_port *port)
 	 * and interrupt read if they exists                  */
 	if (serial->dev) {
 		if (mos7840_port->write_urb) {
-			dbg("%s", "Shutdown bulk write\n");
+			dbg("%s", "Shutdown bulk write");
 			usb_kill_urb(mos7840_port->write_urb);
 		}
 		if (mos7840_port->read_urb) {
-			dbg("%s", "Shutdown bulk read\n");
+			dbg("%s", "Shutdown bulk read");
 			usb_kill_urb(mos7840_port->read_urb);
 			mos7840_port->read_urb_busy = false;
 		}
 		if ((&mos7840_port->control_urb)) {
-			dbg("%s", "Shutdown control read\n");
+			dbg("%s", "Shutdown control read");
 			/*/      usb_kill_urb (mos7840_port->control_urb); */
 		}
 	}
 /*      if(mos7840_port->ctrl_buf != NULL) */
 /*              kfree(mos7840_port->ctrl_buf); */
 	port0->open_ports--;
-	dbg("mos7840_num_open_ports in close%d:in port%d\n",
+	dbg("mos7840_num_open_ports in close%d:in port%d",
 	    port0->open_ports, port->number);
 	if (port0->open_ports == 0) {
 		if (serial->port[0]->interrupt_in_urb) {
-			dbg("%s", "Shutdown interrupt_in_urb\n");
+			dbg("%s", "Shutdown interrupt_in_urb");
 			usb_kill_urb(serial->port[0]->interrupt_in_urb);
 		}
 	}
@@ -1225,7 +1229,7 @@ static void mos7840_close(struct usb_serial_port *port)
 
 	mos7840_port->open = 0;
 
-	dbg("%s \n", "Leaving ............");
+	dbg("%s", "Leaving ............");
 }
 
 /************************************************************************
@@ -1280,17 +1284,17 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
 
-	dbg("%s \n", "Entering ...........");
-	dbg("mos7840_break: Start\n");
+	dbg("%s", "Entering ...........");
+	dbg("mos7840_break: Start");
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed \n");
+		dbg("%s", "Port Paranoia failed");
 		return;
 	}
 
 	serial = mos7840_get_usb_serial(port, __func__);
 	if (!serial) {
-		dbg("%s", "Serial Paranoia failed \n");
+		dbg("%s", "Serial Paranoia failed");
 		return;
 	}
 
@@ -1310,7 +1314,7 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 
 	/* FIXME: no locking on shadowLCR anywhere in driver */
 	mos7840_port->shadowLCR = data;
-	dbg("mcs7840_break mos7840_port->shadowLCR is %x\n",
+	dbg("mcs7840_break mos7840_port->shadowLCR is %x",
 	    mos7840_port->shadowLCR);
 	mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
 			     mos7840_port->shadowLCR);
@@ -1334,17 +1338,17 @@ static int mos7840_write_room(struct tty_struct *tty)
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
 
-	dbg("%s \n", " mos7840_write_room:entering ...........");
+	dbg("%s", " mos7840_write_room:entering ...........");
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
-		dbg("%s \n", " mos7840_write_room:leaving ...........");
+		dbg("%s", "Invalid port");
+		dbg("%s", " mos7840_write_room:leaving ...........");
 		return -1;
 	}
 
 	mos7840_port = mos7840_get_port_private(port);
 	if (mos7840_port == NULL) {
-		dbg("%s \n", "mos7840_break:leaving ...........");
+		dbg("%s", "mos7840_break:leaving ...........");
 		return -1;
 	}
 
@@ -1384,16 +1388,16 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* __u16 Data; */
 	const unsigned char *current_position = data;
 	unsigned char *data1;
-	dbg("%s \n", "entering ...........");
-	/* dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+	dbg("%s", "entering ...........");
+	/* dbg("mos7840_write: mos7840_port->shadowLCR is %x",
 					mos7840_port->shadowLCR); */
 
 #ifdef NOTMOS7840
 	Data = 0x00;
 	status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
 	mos7840_port->shadowLCR = Data;
-	dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data);
-	dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+	dbg("mos7840_write: LINE_CONTROL_REGISTER is %x", Data);
+	dbg("mos7840_write: mos7840_port->shadowLCR is %x",
 	    mos7840_port->shadowLCR);
 
 	/* Data = 0x03; */
@@ -1407,32 +1411,32 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
 	Data = 0x00;
 	status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
-	dbg("mos7840_write:DLL value is %x\n", Data);
+	dbg("mos7840_write:DLL value is %x", Data);
 
 	Data = 0x0;
 	status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
-	dbg("mos7840_write:DLM value is %x\n", Data);
+	dbg("mos7840_write:DLM value is %x", Data);
 
 	Data = Data & ~SERIAL_LCR_DLAB;
-	dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+	dbg("mos7840_write: mos7840_port->shadowLCR is %x",
 	    mos7840_port->shadowLCR);
 	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 #endif
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed \n");
+		dbg("%s", "Port Paranoia failed");
 		return -1;
 	}
 
 	serial = port->serial;
 	if (mos7840_serial_paranoia_check(serial, __func__)) {
-		dbg("%s", "Serial Paranoia failed \n");
+		dbg("%s", "Serial Paranoia failed");
 		return -1;
 	}
 
 	mos7840_port = mos7840_get_port_private(port);
 	if (mos7840_port == NULL) {
-		dbg("%s", "mos7840_port is NULL\n");
+		dbg("%s", "mos7840_port is NULL");
 		return -1;
 	}
 
@@ -1444,7 +1448,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 		if (!mos7840_port->busy[i]) {
 			mos7840_port->busy[i] = 1;
 			urb = mos7840_port->write_urb_pool[i];
-			dbg("\nURB:%d", i);
+			dbg("URB:%d", i);
 			break;
 		}
 	}
@@ -1479,7 +1483,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 			  mos7840_bulk_out_data_callback, mos7840_port);
 
 	data1 = urb->transfer_buffer;
-	dbg("\nbulkout endpoint is %d", port->bulk_out_endpointAddress);
+	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
 
 	/* send it down the pipe */
 	status = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1494,7 +1498,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	bytes_sent = transfer_size;
 	mos7840_port->icount.tx += transfer_size;
 	smp_wmb();
-	dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
+	dbg("mos7840_port->icount.tx is %d:", mos7840_port->icount.tx);
 exit:
 	return bytes_sent;
 
@@ -1513,11 +1517,11 @@ static void mos7840_throttle(struct tty_struct *tty)
 	int status;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
+		dbg("%s", "Invalid port");
 		return;
 	}
 
-	dbg("- port %d\n", port->number);
+	dbg("- port %d", port->number);
 
 	mos7840_port = mos7840_get_port_private(port);
 
@@ -1525,11 +1529,11 @@ static void mos7840_throttle(struct tty_struct *tty)
 		return;
 
 	if (!mos7840_port->open) {
-		dbg("%s\n", "port not opened");
+		dbg("%s", "port not opened");
 		return;
 	}
 
-	dbg("%s", "Entering .......... \n");
+	dbg("%s", "Entering ..........");
 
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
@@ -1563,7 +1567,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
 	struct moschip_port *mos7840_port = mos7840_get_port_private(port);
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
+		dbg("%s", "Invalid port");
 		return;
 	}
 
@@ -1575,7 +1579,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
 		return;
 	}
 
-	dbg("%s", "Entering .......... \n");
+	dbg("%s", "Entering ..........");
 
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
@@ -1660,7 +1664,7 @@ static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
 
 	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
 	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed\n");
+		dbg("setting MODEM_CONTROL_REGISTER Failed");
 		return status;
 	}
 
@@ -1729,11 +1733,11 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
 			custom++;
 		*divisor = custom;
 
-		dbg(" Baud %d = %d\n", baudrate, custom);
+		dbg(" Baud %d = %d", baudrate, custom);
 		return 0;
 	}
 
-	dbg("%s\n", " Baud calculation Failed...");
+	dbg("%s", " Baud calculation Failed...");
 	return -1;
 #endif
 }
@@ -1759,16 +1763,16 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
 	port = (struct usb_serial_port *)mos7840_port->port;
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
+		dbg("%s", "Invalid port");
 		return -1;
 	}
 
 	if (mos7840_serial_paranoia_check(port->serial, __func__)) {
-		dbg("%s", "Invalid Serial \n");
+		dbg("%s", "Invalid Serial");
 		return -1;
 	}
 
-	dbg("%s", "Entering .......... \n");
+	dbg("%s", "Entering ..........");
 
 	number = mos7840_port->port->number - mos7840_port->port->serial->minor;
 
@@ -1784,7 +1788,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 									Data);
 		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud\n");
+			dbg("Writing spreg failed in set_serial_baud");
 			return -1;
 		}
 #endif
@@ -1797,7 +1801,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 									Data);
 		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud\n");
+			dbg("Writing spreg failed in set_serial_baud");
 			return -1;
 		}
 #endif
@@ -1812,14 +1816,14 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 		status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
 								 &Data);
 		if (status < 0) {
-			dbg("reading spreg failed in set_serial_baud\n");
+			dbg("reading spreg failed in set_serial_baud");
 			return -1;
 		}
 		Data = (Data & 0x8f) | clk_sel_val;
 		status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
 								Data);
 		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud\n");
+			dbg("Writing spreg failed in set_serial_baud");
 			return -1;
 		}
 		/* Calculate the Divisor */
@@ -1835,11 +1839,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
 		/* Write the divisor */
 		Data = (unsigned char)(divisor & 0xff);
-		dbg("set_serial_baud Value to write DLL is %x\n", Data);
+		dbg("set_serial_baud Value to write DLL is %x", Data);
 		mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
 
 		Data = (unsigned char)((divisor & 0xff00) >> 8);
-		dbg("set_serial_baud Value to write DLM is %x\n", Data);
+		dbg("set_serial_baud Value to write DLM is %x", Data);
 		mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
 
 		/* Disable access to divisor latch */
@@ -1877,12 +1881,12 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	port = (struct usb_serial_port *)mos7840_port->port;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
+		dbg("%s", "Invalid port");
 		return;
 	}
 
 	if (mos7840_serial_paranoia_check(port->serial, __func__)) {
-		dbg("%s", "Invalid Serial \n");
+		dbg("%s", "Invalid Serial");
 		return;
 	}
 
@@ -1895,7 +1899,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 		return;
 	}
 
-	dbg("%s", "Entering .......... \n");
+	dbg("%s", "Entering ..........");
 
 	lData = LCR_BITS_8;
 	lStop = LCR_STOP_1;
@@ -1955,7 +1959,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	    ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
 	mos7840_port->shadowLCR |= (lData | lParity | lStop);
 
-	dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x\n",
+	dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x",
 	    mos7840_port->shadowLCR);
 	/* Disable Interrupts */
 	Data = 0x00;
@@ -1997,7 +2001,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 
 	if (!baud) {
 		/* pick a default, any default... */
-		dbg("%s\n", "Picked default baud...");
+		dbg("%s", "Picked default baud...");
 		baud = 9600;
 	}
 
@@ -2020,7 +2024,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	}
 	wake_up(&mos7840_port->delta_msr_wait);
 	mos7840_port->delta_msr_cond = 1;
-	dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x\n",
+	dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x",
 	    mos7840_port->shadowLCR);
 
 	return;
@@ -2040,16 +2044,16 @@ static void mos7840_set_termios(struct tty_struct *tty,
 	unsigned int cflag;
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
-	dbg("mos7840_set_termios: START\n");
+	dbg("mos7840_set_termios: START");
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
+		dbg("%s", "Invalid port");
 		return;
 	}
 
 	serial = port->serial;
 
 	if (mos7840_serial_paranoia_check(serial, __func__)) {
-		dbg("%s", "Invalid Serial \n");
+		dbg("%s", "Invalid Serial");
 		return;
 	}
 
@@ -2063,7 +2067,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	dbg("%s\n", "setting termios - ");
+	dbg("%s", "setting termios - ");
 
 	cflag = tty->termios->c_cflag;
 
@@ -2078,7 +2082,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
 	mos7840_change_port_settings(tty, mos7840_port, old_termios);
 
 	if (!mos7840_port->read_urb) {
-		dbg("%s", "URB KILLED !!!!!\n");
+		dbg("%s", "URB KILLED !!!!!");
 		return;
 	}
 
@@ -2144,7 +2148,7 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
 
 	port = (struct usb_serial_port *)mos7840_port->port;
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
+		dbg("%s", "Invalid port");
 		return -1;
 	}
 
@@ -2189,7 +2193,7 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
 	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
 	unlock_kernel();
 	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed\n");
+		dbg("setting MODEM_CONTROL_REGISTER Failed");
 		return -1;
 	}
 
@@ -2274,7 +2278,7 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 	int mosret = 0;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port \n");
+		dbg("%s", "Invalid port");
 		return -1;
 	}
 
@@ -2374,9 +2378,8 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
 	int mos7840_num_ports = 0;
 
-	dbg("numberofendpoints: %d \n",
-	    (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
-	dbg("numberofendpoints: %d \n",
+	dbg("numberofendpoints: cur %d, alt %d",
+	    (int)serial->interface->cur_altsetting->desc.bNumEndpoints,
 	    (int)serial->interface->altsetting->desc.bNumEndpoints);
 	if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
 		mos7840_num_ports = serial->num_ports = 2;
@@ -2385,7 +2388,7 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 		serial->num_bulk_out = 4;
 		mos7840_num_ports = serial->num_ports = 4;
 	}
-
+	dbg ("mos7840_num_ports = %d", mos7840_num_ports);
 	return mos7840_num_ports;
 }
 
@@ -2400,22 +2403,24 @@ static int mos7840_startup(struct usb_serial *serial)
 	int i, status;
 
 	__u16 Data;
-	dbg("%s \n", " mos7840_startup :entering..........");
+	dbg("%s", "mos7840_startup :Entering..........");
 
 	if (!serial) {
-		dbg("%s\n", "Invalid Handler");
+		dbg("%s", "Invalid Handler");
 		return -1;
 	}
 
 	dev = serial->dev;
 
-	dbg("%s\n", "Entering...");
+	dbg("%s", "Entering...");
+	dbg ("mos7840_startup: serial = %p", serial);
 
 	/* we set up the pointers to the endpoints in the mos7840_open *
 	 * function, as the structures aren't created yet.             */
 
 	/* set up port private structures */
 	for (i = 0; i < serial->num_ports; ++i) {
+		dbg ("mos7840_startup: configuring port %d............", i);
 		mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
 		if (mos7840_port == NULL) {
 			dev_err(&dev->dev, "%s - Out of memory\n", __func__);
@@ -2473,10 +2478,10 @@ static int mos7840_startup(struct usb_serial *serial)
 		status = mos7840_get_reg_sync(serial->port[i],
 				 mos7840_port->ControlRegOffset, &Data);
 		if (status < 0) {
-			dbg("Reading ControlReg failed status-0x%x\n", status);
+			dbg("Reading ControlReg failed status-0x%x", status);
 			break;
 		} else
-			dbg("ControlReg Reading success val is %x, status%d\n",
+			dbg("ControlReg Reading success val is %x, status%d",
 			    Data, status);
 		Data |= 0x08;	/* setting driver done bit */
 		Data |= 0x04;	/* sp1_bit to have cts change reflect in
@@ -2486,10 +2491,10 @@ static int mos7840_startup(struct usb_serial *serial)
 		status = mos7840_set_reg_sync(serial->port[i],
 					 mos7840_port->ControlRegOffset, Data);
 		if (status < 0) {
-			dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+			dbg("Writing ControlReg failed(rx_disable) status-0x%x", status);
 			break;
 		} else
-			dbg("ControlReg Writing success(rx_disable) status%d\n",
+			dbg("ControlReg Writing success(rx_disable) status%d",
 			    status);
 
 		/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
@@ -2498,48 +2503,48 @@ static int mos7840_startup(struct usb_serial *serial)
 		status = mos7840_set_reg_sync(serial->port[i],
 			 (__u16) (mos7840_port->DcrRegOffset + 0), Data);
 		if (status < 0) {
-			dbg("Writing DCR0 failed status-0x%x\n", status);
+			dbg("Writing DCR0 failed status-0x%x", status);
 			break;
 		} else
-			dbg("DCR0 Writing success status%d\n", status);
+			dbg("DCR0 Writing success status%d", status);
 
 		Data = 0x05;
 		status = mos7840_set_reg_sync(serial->port[i],
 			 (__u16) (mos7840_port->DcrRegOffset + 1), Data);
 		if (status < 0) {
-			dbg("Writing DCR1 failed status-0x%x\n", status);
+			dbg("Writing DCR1 failed status-0x%x", status);
 			break;
 		} else
-			dbg("DCR1 Writing success status%d\n", status);
+			dbg("DCR1 Writing success status%d", status);
 
 		Data = 0x24;
 		status = mos7840_set_reg_sync(serial->port[i],
 			 (__u16) (mos7840_port->DcrRegOffset + 2), Data);
 		if (status < 0) {
-			dbg("Writing DCR2 failed status-0x%x\n", status);
+			dbg("Writing DCR2 failed status-0x%x", status);
 			break;
 		} else
-			dbg("DCR2 Writing success status%d\n", status);
+			dbg("DCR2 Writing success status%d", status);
 
 		/* write values in clkstart0x0 and clkmulti 0x20 */
 		Data = 0x0;
 		status = mos7840_set_reg_sync(serial->port[i],
 					 CLK_START_VALUE_REGISTER, Data);
 		if (status < 0) {
-			dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+			dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x", status);
 			break;
 		} else
-			dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+			dbg("CLK_START_VALUE_REGISTER Writing success status%d", status);
 
 		Data = 0x20;
 		status = mos7840_set_reg_sync(serial->port[i],
 					CLK_MULTI_REGISTER, Data);
 		if (status < 0) {
-			dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
+			dbg("Writing CLK_MULTI_REGISTER failed status-0x%x",
 			    status);
 			goto error;
 		} else
-			dbg("CLK_MULTI_REGISTER Writing success status%d\n",
+			dbg("CLK_MULTI_REGISTER Writing success status%d",
 			    status);
 
 		/* write value 0x0 to scratchpad register */
@@ -2547,11 +2552,11 @@ static int mos7840_startup(struct usb_serial *serial)
 		status = mos7840_set_uart_reg(serial->port[i],
 						SCRATCH_PAD_REGISTER, Data);
 		if (status < 0) {
-			dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n",
+			dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x",
 			    status);
 			break;
 		} else
-			dbg("SCRATCH_PAD_REGISTER Writing success status%d\n",
+			dbg("SCRATCH_PAD_REGISTER Writing success status%d",
 			    status);
 
 		/* Zero Length flag register */
@@ -2562,30 +2567,30 @@ static int mos7840_startup(struct usb_serial *serial)
 			status = mos7840_set_reg_sync(serial->port[i],
 				      (__u16) (ZLP_REG1 +
 				      ((__u16)mos7840_port->port_num)), Data);
-			dbg("ZLIP offset%x\n",
+			dbg("ZLIP offset %x",
 			    (__u16) (ZLP_REG1 +
 					((__u16) mos7840_port->port_num)));
 			if (status < 0) {
-				dbg("Writing ZLP_REG%d failed status-0x%x\n",
+				dbg("Writing ZLP_REG%d failed status-0x%x",
 				    i + 2, status);
 				break;
 			} else
-				dbg("ZLP_REG%d Writing success status%d\n",
+				dbg("ZLP_REG%d Writing success status%d",
 				    i + 2, status);
 		} else {
 			Data = 0xff;
 			status = mos7840_set_reg_sync(serial->port[i],
 			      (__u16) (ZLP_REG1 +
 			      ((__u16)mos7840_port->port_num) - 0x1), Data);
-			dbg("ZLIP offset%x\n",
+			dbg("ZLIP offset %x",
 			    (__u16) (ZLP_REG1 +
 				     ((__u16) mos7840_port->port_num) - 0x1));
 			if (status < 0) {
-				dbg("Writing ZLP_REG%d failed status-0x%x\n",
+				dbg("Writing ZLP_REG%d failed status-0x%x",
 				    i + 1, status);
 				break;
 			} else
-				dbg("ZLP_REG%d Writing success status%d\n",
+				dbg("ZLP_REG%d Writing success status%d",
 				    i + 1, status);
 
 		}
@@ -2599,15 +2604,16 @@ static int mos7840_startup(struct usb_serial *serial)
 			goto error;
 		}
 	}
+	dbg ("mos7840_startup: all ports configured...........");
 
 	/* Zero Length flag enable */
 	Data = 0x0f;
 	status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
 	if (status < 0) {
-		dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
+		dbg("Writing ZLP_REG5 failed status-0x%x", status);
 		goto error;
 	} else
-		dbg("ZLP_REG5 Writing success status%d\n", status);
+		dbg("ZLP_REG5 Writing success status%d", status);
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
@@ -2627,19 +2633,19 @@ error:
 }
 
 /****************************************************************************
- * mos7840_shutdown
+ * mos7840_disconnect
  *	This function is called whenever the device is removed from the usb bus.
  ****************************************************************************/
 
-static void mos7840_shutdown(struct usb_serial *serial)
+static void mos7840_disconnect(struct usb_serial *serial)
 {
 	int i;
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
-	dbg("%s \n", " shutdown :entering..........");
+	dbg("%s", " disconnect :entering..........");
 
 	if (!serial) {
-		dbg("%s", "Invalid Handler \n");
+		dbg("%s", "Invalid Handler");
 		return;
 	}
 
@@ -2656,14 +2662,45 @@ static void mos7840_shutdown(struct usb_serial *serial)
 			mos7840_port->zombie = 1;
 			spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 			usb_kill_urb(mos7840_port->control_urb);
+		}
+	}
+
+	dbg("%s", "Thank u :: ");
+
+}
+
+/****************************************************************************
+ * mos7840_release
+ *	This function is called when the usb_serial structure is freed.
+ ****************************************************************************/
+
+static void mos7840_release(struct usb_serial *serial)
+{
+	int i;
+	struct moschip_port *mos7840_port;
+	dbg("%s", " release :entering..........");
+
+	if (!serial) {
+		dbg("%s", "Invalid Handler");
+		return;
+	}
+
+	/* check for the ports to be closed,close the ports and disconnect */
+
+	/* free private structure allocated for serial port  *
+	 * stop reads and writes on all ports                */
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		mos7840_port = mos7840_get_port_private(serial->port[i]);
+		dbg("mos7840_port %d = %p", i, mos7840_port);
+		if (mos7840_port) {
 			kfree(mos7840_port->ctrl_buf);
 			kfree(mos7840_port->dr);
 			kfree(mos7840_port);
 		}
-		mos7840_set_port_private(serial->port[i], NULL);
 	}
 
-	dbg("%s\n", "Thank u :: ");
+	dbg("%s", "Thank u :: ");
 
 }
 
@@ -2701,7 +2738,8 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.tiocmget = mos7840_tiocmget,
 	.tiocmset = mos7840_tiocmset,
 	.attach = mos7840_startup,
-	.shutdown = mos7840_shutdown,
+	.disconnect = mos7840_disconnect,
+	.release = mos7840_release,
 	.read_bulk_callback = mos7840_bulk_in_callback,
 	.read_int_callback = mos7840_interrupt_callback,
 };
@@ -2714,7 +2752,7 @@ static int __init moschip7840_init(void)
 {
 	int retval;
 
-	dbg("%s \n", " mos7840_init :entering..........");
+	dbg("%s", " mos7840_init :entering..........");
 
 	/* Register with the usb serial */
 	retval = usb_serial_register(&moschip7840_4port_device);
@@ -2722,14 +2760,14 @@ static int __init moschip7840_init(void)
 	if (retval)
 		goto failed_port_device_register;
 
-	dbg("%s\n", "Entring...");
+	dbg("%s", "Entering...");
 	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 	       DRIVER_DESC "\n");
 
 	/* Register with the usb */
 	retval = usb_register(&io_driver);
 	if (retval == 0) {
-		dbg("%s\n", "Leaving...");
+		dbg("%s", "Leaving...");
 		return 0;
 	}
 	usb_serial_deregister(&moschip7840_4port_device);
@@ -2744,13 +2782,13 @@ failed_port_device_register:
 static void __exit moschip7840_exit(void)
 {
 
-	dbg("%s \n", " mos7840_exit :entering..........");
+	dbg("%s", " mos7840_exit :entering..........");
 
 	usb_deregister(&io_driver);
 
 	usb_serial_deregister(&moschip7840_4port_device);
 
-	dbg("%s\n", "Entring...");
+	dbg("%s", "Entering...");
 }
 
 module_init(moschip7840_init);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 1104617334f..56857ddbd70 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -72,7 +72,8 @@ static void omninet_write_bulk_callback(struct urb *urb);
 static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *buf, int count);
 static int  omninet_write_room(struct tty_struct *tty);
-static void omninet_shutdown(struct usb_serial *serial);
+static void omninet_disconnect(struct usb_serial *serial);
+static void omninet_release(struct usb_serial *serial);
 static int omninet_attach(struct usb_serial *serial);
 
 static struct usb_device_id id_table[] = {
@@ -108,7 +109,8 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.write_room =		omninet_write_room,
 	.read_bulk_callback =	omninet_read_bulk_callback,
 	.write_bulk_callback =	omninet_write_bulk_callback,
-	.shutdown =		omninet_shutdown,
+	.disconnect =		omninet_disconnect,
+	.release =		omninet_release,
 };
 
 
@@ -345,13 +347,22 @@ static void omninet_write_bulk_callback(struct urb *urb)
 }
 
 
-static void omninet_shutdown(struct usb_serial *serial)
+static void omninet_disconnect(struct usb_serial *serial)
 {
 	struct usb_serial_port *wport = serial->port[1];
-	struct usb_serial_port *port = serial->port[0];
+
 	dbg("%s", __func__);
 
 	usb_kill_urb(wport->write_urb);
+}
+
+
+static void omninet_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *port = serial->port[0];
+
+	dbg("%s", __func__);
+
 	kfree(usb_get_serial_port_data(port));
 }
 
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index c20480aa975..336bba79ad3 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -463,7 +463,7 @@ error:
 	return retval;
 }
 
-static void opticon_shutdown(struct usb_serial *serial)
+static void opticon_disconnect(struct usb_serial *serial)
 {
 	struct opticon_private *priv = usb_get_serial_data(serial);
 
@@ -471,9 +471,16 @@ static void opticon_shutdown(struct usb_serial *serial)
 
 	usb_kill_urb(priv->bulk_read_urb);
 	usb_free_urb(priv->bulk_read_urb);
+}
+
+static void opticon_release(struct usb_serial *serial)
+{
+	struct opticon_private *priv = usb_get_serial_data(serial);
+
+	dbg("%s", __func__);
+
 	kfree(priv->bulk_in_buffer);
 	kfree(priv);
-	usb_set_serial_data(serial, NULL);
 }
 
 static int opticon_suspend(struct usb_interface *intf, pm_message_t message)
@@ -524,7 +531,8 @@ static struct usb_serial_driver opticon_device = {
 	.close =		opticon_close,
 	.write =		opticon_write,
 	.write_room = 		opticon_write_room,
-	.shutdown =		opticon_shutdown,
+	.disconnect =		opticon_disconnect,
+	.release =		opticon_release,
 	.throttle = 		opticon_throttle,
 	.unthrottle =		opticon_unthrottle,
 	.ioctl =		opticon_ioctl,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a16d69fadba..575816e6ba3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -43,13 +43,16 @@
 #include <linux/usb/serial.h>
 
 /* Function prototypes */
+static int  option_probe(struct usb_serial *serial,
+			const struct usb_device_id *id);
 static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
 							struct file *filp);
 static void option_close(struct usb_serial_port *port);
 static void option_dtr_rts(struct usb_serial_port *port, int on);
 
 static int  option_startup(struct usb_serial *serial);
-static void option_shutdown(struct usb_serial *serial);
+static void option_disconnect(struct usb_serial *serial);
+static void option_release(struct usb_serial *serial);
 static int  option_write_room(struct tty_struct *tty);
 
 static void option_instat_callback(struct urb *urb);
@@ -202,9 +205,9 @@ static int  option_resume(struct usb_serial *serial);
 #define NOVATELWIRELESS_PRODUCT_MC727		0x4100
 #define NOVATELWIRELESS_PRODUCT_MC950D		0x4400
 #define NOVATELWIRELESS_PRODUCT_U727		0x5010
+#define NOVATELWIRELESS_PRODUCT_MC760		0x6000
 
 /* FUTURE NOVATEL PRODUCTS */
-#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED	0X6000
 #define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED	0X6001
 #define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED	0X7000
 #define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED	0X7001
@@ -305,6 +308,10 @@ static int  option_resume(struct usb_serial *serial);
 #define DLINK_PRODUCT_DWM_652			0x3e04
 
 
+/* TOSHIBA PRODUCTS */
+#define TOSHIBA_VENDOR_ID			0x0930
+#define TOSHIBA_PRODUCT_HSDPA_MINICARD		0x1302
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -422,7 +429,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
-	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -523,6 +530,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -550,6 +558,7 @@ static struct usb_serial_driver option_1port_device = {
 	.usb_driver        = &option_driver,
 	.id_table          = option_ids,
 	.num_ports         = 1,
+	.probe             = option_probe,
 	.open              = option_open,
 	.close             = option_close,
 	.dtr_rts	   = option_dtr_rts,
@@ -560,7 +569,8 @@ static struct usb_serial_driver option_1port_device = {
 	.tiocmget          = option_tiocmget,
 	.tiocmset          = option_tiocmset,
 	.attach            = option_startup,
-	.shutdown          = option_shutdown,
+	.disconnect        = option_disconnect,
+	.release           = option_release,
 	.read_int_callback = option_instat_callback,
 	.suspend           = option_suspend,
 	.resume            = option_resume,
@@ -626,6 +636,18 @@ static void __exit option_exit(void)
 module_init(option_init);
 module_exit(option_exit);
 
+static int option_probe(struct usb_serial *serial,
+			const struct usb_device_id *id)
+{
+	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
+	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
+		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
+		serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8)
+		return -ENODEV;
+
+	return 0;
+}
+
 static void option_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -1129,7 +1151,14 @@ static void stop_read_write_urbs(struct usb_serial *serial)
 	}
 }
 
-static void option_shutdown(struct usb_serial *serial)
+static void option_disconnect(struct usb_serial *serial)
+{
+	dbg("%s", __func__);
+
+	stop_read_write_urbs(serial);
+}
+
+static void option_release(struct usb_serial *serial)
 {
 	int i, j;
 	struct usb_serial_port *port;
@@ -1137,8 +1166,6 @@ static void option_shutdown(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	stop_read_write_urbs(serial);
-
 	/* Now free them */
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 7de54781fe6..3cece27325e 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -159,7 +159,7 @@ static int oti6858_tiocmget(struct tty_struct *tty, struct file *file);
 static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
 static int oti6858_startup(struct usb_serial *serial);
-static void oti6858_shutdown(struct usb_serial *serial);
+static void oti6858_release(struct usb_serial *serial);
 
 /* functions operating on buffers */
 static struct oti6858_buf *oti6858_buf_alloc(unsigned int size);
@@ -194,7 +194,7 @@ static struct usb_serial_driver oti6858_device = {
 	.write_room =		oti6858_write_room,
 	.chars_in_buffer =	oti6858_chars_in_buffer,
 	.attach =		oti6858_startup,
-	.shutdown =		oti6858_shutdown,
+	.release =		oti6858_release,
 };
 
 struct oti6858_private {
@@ -782,7 +782,7 @@ static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 }
 
 
-static void oti6858_shutdown(struct usb_serial *serial)
+static void oti6858_release(struct usb_serial *serial)
 {
 	struct oti6858_private *priv;
 	int i;
@@ -794,7 +794,6 @@ static void oti6858_shutdown(struct usb_serial *serial)
 		if (priv) {
 			oti6858_buf_free(priv->buf);
 			kfree(priv);
-			usb_set_serial_port_data(serial->port[i], NULL);
 		}
 	}
 }
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index e02dc3d643c..ec6c132a25b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -878,7 +878,7 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 		dbg("%s - error sending break = %d", __func__, result);
 }
 
-static void pl2303_shutdown(struct usb_serial *serial)
+static void pl2303_release(struct usb_serial *serial)
 {
 	int i;
 	struct pl2303_private *priv;
@@ -890,7 +890,6 @@ static void pl2303_shutdown(struct usb_serial *serial)
 		if (priv) {
 			pl2303_buf_free(priv->buf);
 			kfree(priv);
-			usb_set_serial_port_data(serial->port[i], NULL);
 		}
 	}
 }
@@ -927,6 +926,8 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_status = data[status_idx];
 	spin_unlock_irqrestore(&priv->lock, flags);
+	if (priv->line_status & UART_BREAK_ERROR)
+		usb_serial_handle_break(port);
 	wake_up_interruptible(&priv->delta_msr_wait);
 }
 
@@ -1037,7 +1038,8 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 		if (line_status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 		for (i = 0; i < urb->actual_length; ++i)
-			tty_insert_flip_char(tty, data[i], tty_flag);
+			if (!usb_serial_handle_sysrq_char(port, data[i]))
+				tty_insert_flip_char(tty, data[i], tty_flag);
 		tty_flip_buffer_push(tty);
 	}
 	tty_kref_put(tty);
@@ -1120,7 +1122,7 @@ static struct usb_serial_driver pl2303_device = {
 	.write_room =		pl2303_write_room,
 	.chars_in_buffer =	pl2303_chars_in_buffer,
 	.attach =		pl2303_startup,
-	.shutdown =		pl2303_shutdown,
+	.release =		pl2303_release,
 };
 
 static int __init pl2303_init(void)
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 17ac34f4d66..032f7aeb40a 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -1,7 +1,10 @@
 /*
   USB Driver for Sierra Wireless
 
-  Copyright (C) 2006, 2007, 2008  Kevin Lloyd <klloyd@sierrawireless.com>
+  Copyright (C) 2006, 2007, 2008  Kevin Lloyd <klloyd@sierrawireless.com>,
+
+  Copyright (C) 2008, 2009  Elina Pasheva, Matthew Safar, Rory Filer
+			<linux@sierrawireless.com>
 
   IMPORTANT DISCLAIMER: This driver is not commercially supported by
   Sierra Wireless. Use at your own risk.
@@ -14,8 +17,8 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.3.3"
-#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
+#define DRIVER_VERSION "v.1.3.7"
+#define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
 #include <linux/kernel.h>
@@ -30,10 +33,15 @@
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
 
-#define N_IN_URB	4
-#define N_OUT_URB	4
+#define N_IN_URB	8
+#define N_OUT_URB	64
 #define IN_BUFLEN	4096
 
+#define MAX_TRANSFER		(PAGE_SIZE - 512)
+/* MAX_TRANSFER is chosen so that the VM is not stressed by
+   allocations > PAGE_SIZE and the number of packets in a page
+   is an integer 512 is the largest possible packet on EHCI */
+
 static int debug;
 static int nmea;
 
@@ -46,7 +54,7 @@ struct sierra_iface_info {
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", __func__);
+	dev_dbg(&udev->dev, "%s\n", __func__);
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetPower,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
@@ -61,7 +69,7 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", __func__);
+	dev_dbg(&udev->dev, "%s\n", __func__);
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetNmea,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
@@ -75,18 +83,22 @@ static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 
 static int sierra_calc_num_ports(struct usb_serial *serial)
 {
-	int result;
-	int *num_ports = usb_get_serial_data(serial);
-	dev_dbg(&serial->dev->dev, "%s", __func__);
+	int num_ports = 0;
+	u8 ifnum, numendpoints;
 
-	result = *num_ports;
+	dev_dbg(&serial->dev->dev, "%s\n", __func__);
 
-	if (result) {
-		kfree(num_ports);
-		usb_set_serial_data(serial, NULL);
-	}
+	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
 
-	return result;
+	/* Dummy interface present on some SKUs should be ignored */
+	if (ifnum == 0x99)
+		num_ports = 0;
+	else if (numendpoints <= 3)
+		num_ports = 1;
+	else
+		num_ports = (numendpoints-1)/2;
+	return num_ports;
 }
 
 static int is_blacklisted(const u8 ifnum,
@@ -111,7 +123,7 @@ static int sierra_calc_interface(struct usb_serial *serial)
 	int interface;
 	struct usb_interface *p_interface;
 	struct usb_host_interface *p_host_interface;
-	dev_dbg(&serial->dev->dev, "%s", __func__);
+	dev_dbg(&serial->dev->dev, "%s\n", __func__);
 
 	/* Get the interface structure pointer from the serial struct */
 	p_interface = serial->interface;
@@ -132,23 +144,12 @@ static int sierra_probe(struct usb_serial *serial,
 {
 	int result = 0;
 	struct usb_device *udev;
-	int *num_ports;
 	u8 ifnum;
-	u8 numendpoints;
 
-	dev_dbg(&serial->dev->dev, "%s", __func__);
-
-	num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL);
-	if (!num_ports)
-		return -ENOMEM;
-
-	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
-	numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
 	udev = serial->dev;
+	dev_dbg(&udev->dev, "%s\n", __func__);
 
-	/* Figure out the interface number from the serial structure */
 	ifnum = sierra_calc_interface(serial);
-
 	/*
 	 * If this interface supports more than 1 alternate
 	 * select the 2nd one
@@ -160,20 +161,6 @@ static int sierra_probe(struct usb_serial *serial,
 		usb_set_interface(udev, ifnum, 1);
 	}
 
-	/* Dummy interface present on some SKUs should be ignored */
-	if (ifnum == 0x99)
-		*num_ports = 0;
-	else if (numendpoints <= 3)
-		*num_ports = 1;
-	else
-		*num_ports = (numendpoints-1)/2;
-
-	/*
-	 * save off our num_ports info so that we can use it in the
-	 * calc_num_ports callback
-	 */
-	usb_set_serial_data(serial, (void *)num_ports);
-
 	/* ifnum could have changed - by calling usb_set_interface */
 	ifnum = sierra_calc_interface(serial);
 
@@ -289,7 +276,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
 	__u16 interface = 0;
 	int val = 0;
 
-	dev_dbg(&port->dev, "%s", __func__);
+	dev_dbg(&port->dev, "%s\n", __func__);
 
 	portdata = usb_get_serial_port_data(port);
 
@@ -332,7 +319,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
 static void sierra_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	dev_dbg(&port->dev, "%s", __func__);
+	dev_dbg(&port->dev, "%s\n", __func__);
 	tty_termios_copy_hw(tty->termios, old_termios);
 	sierra_send_setup(port);
 }
@@ -343,7 +330,7 @@ static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
 	unsigned int value;
 	struct sierra_port_private *portdata;
 
-	dev_dbg(&port->dev, "%s", __func__);
+	dev_dbg(&port->dev, "%s\n", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
@@ -394,14 +381,14 @@ static void sierra_outdat_callback(struct urb *urb)
 	int status = urb->status;
 	unsigned long flags;
 
-	dev_dbg(&port->dev, "%s - port %d", __func__, port->number);
+	dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
 	kfree(urb->transfer_buffer);
 
 	if (status)
 		dev_dbg(&port->dev, "%s - nonzero write bulk status "
-		    "received: %d", __func__, status);
+		    "received: %d\n", __func__, status);
 
 	spin_lock_irqsave(&portdata->lock, flags);
 	--portdata->outstanding_urbs;
@@ -419,50 +406,61 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 	unsigned long flags;
 	unsigned char *buffer;
 	struct urb *urb;
-	int status;
+	size_t writesize = min((size_t)count, (size_t)MAX_TRANSFER);
+	int retval = 0;
+
+	/* verify that we actually have some data to write */
+	if (count == 0)
+		return 0;
 
 	portdata = usb_get_serial_port_data(port);
 
-	dev_dbg(&port->dev, "%s: write (%d chars)", __func__, count);
+	dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize);
 
 	spin_lock_irqsave(&portdata->lock, flags);
+	dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__,
+		portdata->outstanding_urbs);
 	if (portdata->outstanding_urbs > N_OUT_URB) {
 		spin_unlock_irqrestore(&portdata->lock, flags);
 		dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
 		return 0;
 	}
 	portdata->outstanding_urbs++;
+	dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__,
+		portdata->outstanding_urbs);
 	spin_unlock_irqrestore(&portdata->lock, flags);
 
-	buffer = kmalloc(count, GFP_ATOMIC);
+	buffer = kmalloc(writesize, GFP_ATOMIC);
 	if (!buffer) {
 		dev_err(&port->dev, "out of memory\n");
-		count = -ENOMEM;
+		retval = -ENOMEM;
 		goto error_no_buffer;
 	}
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
 		dev_err(&port->dev, "no more free urbs\n");
-		count = -ENOMEM;
+		retval = -ENOMEM;
 		goto error_no_urb;
 	}
 
-	memcpy(buffer, buf, count);
+	memcpy(buffer, buf, writesize);
 
-	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
+	usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer);
 
 	usb_fill_bulk_urb(urb, serial->dev,
 			  usb_sndbulkpipe(serial->dev,
 					  port->bulk_out_endpointAddress),
-			  buffer, count, sierra_outdat_callback, port);
+			  buffer, writesize, sierra_outdat_callback, port);
+
+	/* Handle the need to send a zero length packet */
+	urb->transfer_flags |= URB_ZERO_PACKET;
 
 	/* send it down the pipe */
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status) {
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval) {
 		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
-			"with status = %d\n", __func__, status);
-		count = status;
+			"with status = %d\n", __func__, retval);
 		goto error;
 	}
 
@@ -470,7 +468,7 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 	 * really free it when it is finished with it */
 	usb_free_urb(urb);
 
-	return count;
+	return writesize;
 error:
 	usb_free_urb(urb);
 error_no_urb:
@@ -478,8 +476,10 @@ error_no_urb:
 error_no_buffer:
 	spin_lock_irqsave(&portdata->lock, flags);
 	--portdata->outstanding_urbs;
+	dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__,
+		portdata->outstanding_urbs);
 	spin_unlock_irqrestore(&portdata->lock, flags);
-	return count;
+	return retval;
 }
 
 static void sierra_indat_callback(struct urb *urb)
@@ -491,33 +491,39 @@ static void sierra_indat_callback(struct urb *urb)
 	unsigned char *data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg("%s: %p", __func__, urb);
-
 	endpoint = usb_pipeendpoint(urb->pipe);
-	port =  urb->context;
+	port = urb->context;
+
+	dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
 
 	if (status) {
 		dev_dbg(&port->dev, "%s: nonzero status: %d on"
-		    " endpoint %02x.", __func__, status, endpoint);
+			" endpoint %02x\n", __func__, status, endpoint);
 	} else {
 		if (urb->actual_length) {
 			tty = tty_port_tty_get(&port->port);
+
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
+
 			tty_kref_put(tty);
-		} else
+			usb_serial_debug_data(debug, &port->dev, __func__,
+				urb->actual_length, data);
+		} else {
 			dev_dbg(&port->dev, "%s: empty read urb"
-				" received", __func__);
-
-		/* Resubmit urb so we continue receiving */
-		if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err)
-				dev_err(&port->dev, "resubmit read urb failed."
-					"(%d)\n", err);
+				" received\n", __func__);
 		}
 	}
+
+	/* Resubmit urb so we continue receiving */
+	if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err)
+			dev_err(&port->dev, "resubmit read urb failed."
+				"(%d)\n", err);
+	}
+
 	return;
 }
 
@@ -529,8 +535,7 @@ static void sierra_instat_callback(struct urb *urb)
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
 
-	dev_dbg(&port->dev, "%s", __func__);
-	dev_dbg(&port->dev, "%s: urb %p port %p has data %p", __func__,
+	dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__,
 		urb, port, portdata);
 
 	if (status == 0) {
@@ -550,7 +555,7 @@ static void sierra_instat_callback(struct urb *urb)
 					sizeof(struct usb_ctrlrequest));
 			struct tty_struct *tty;
 
-			dev_dbg(&port->dev, "%s: signal x%x", __func__,
+			dev_dbg(&port->dev, "%s: signal x%x\n", __func__,
 				signals);
 
 			old_dcd_state = portdata->dcd_state;
@@ -565,20 +570,20 @@ static void sierra_instat_callback(struct urb *urb)
 				tty_hangup(tty);
 			tty_kref_put(tty);
 		} else {
-			dev_dbg(&port->dev, "%s: type %x req %x",
+			dev_dbg(&port->dev, "%s: type %x req %x\n",
 				__func__, req_pkt->bRequestType,
 				req_pkt->bRequest);
 		}
 	} else
-		dev_dbg(&port->dev, "%s: error %d", __func__, status);
+		dev_dbg(&port->dev, "%s: error %d\n", __func__, status);
 
 	/* Resubmit urb so we continue receiving IRQ data */
-	if (status != -ESHUTDOWN) {
+	if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) {
 		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err)
-			dev_dbg(&port->dev, "%s: resubmit intr urb "
-				"failed. (%d)",	__func__, err);
+			dev_err(&port->dev, "%s: resubmit intr urb "
+				"failed. (%d)\n", __func__, err);
 	}
 }
 
@@ -588,7 +593,7 @@ static int sierra_write_room(struct tty_struct *tty)
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dev_dbg(&port->dev, "%s - port %d", __func__, port->number);
+	dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
 
 	/* try to give a good number back based on if we have any free urbs at
 	 * this point in time */
@@ -729,7 +734,7 @@ static int sierra_open(struct tty_struct *tty,
 
 	portdata = usb_get_serial_port_data(port);
 
-	dev_dbg(&port->dev, "%s", __func__);
+	dev_dbg(&port->dev, "%s\n", __func__);
 
 	/* Set some sane defaults */
 	portdata->rts_state = 1;
@@ -782,7 +787,7 @@ static int sierra_startup(struct usb_serial *serial)
 	struct sierra_port_private *portdata;
 	int i;
 
-	dev_dbg(&serial->dev->dev, "%s", __func__);
+	dev_dbg(&serial->dev->dev, "%s\n", __func__);
 
 	/* Set Device mode to D0 */
 	sierra_set_power_state(serial->dev, 0x0000);
@@ -797,7 +802,7 @@ static int sierra_startup(struct usb_serial *serial)
 		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
 		if (!portdata) {
 			dev_dbg(&port->dev, "%s: kmalloc for "
-				"sierra_port_private (%d) failed!.",
+				"sierra_port_private (%d) failed!.\n",
 				__func__, i);
 			return -ENOMEM;
 		}
@@ -809,13 +814,13 @@ static int sierra_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void sierra_shutdown(struct usb_serial *serial)
+static void sierra_disconnect(struct usb_serial *serial)
 {
 	int i;
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
 
-	dev_dbg(&serial->dev->dev, "%s", __func__);
+	dev_dbg(&serial->dev->dev, "%s\n", __func__);
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
@@ -848,7 +853,7 @@ static struct usb_serial_driver sierra_device = {
 	.tiocmget          = sierra_tiocmget,
 	.tiocmset          = sierra_tiocmset,
 	.attach            = sierra_startup,
-	.shutdown          = sierra_shutdown,
+	.disconnect        = sierra_disconnect,
 	.read_int_callback = sierra_instat_callback,
 };
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 8f7ed8f1399..3c249d8e8b8 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -356,7 +356,7 @@ cleanup:
 }
 
 /* call when the device plug out. free all the memory alloced by probe */
-static void spcp8x5_shutdown(struct usb_serial *serial)
+static void spcp8x5_release(struct usb_serial *serial)
 {
 	int i;
 	struct spcp8x5_private *priv;
@@ -366,7 +366,6 @@ static void spcp8x5_shutdown(struct usb_serial *serial)
 		if (priv) {
 			free_ringbuf(priv->buf);
 			kfree(priv);
-			usb_set_serial_port_data(serial->port[i] , NULL);
 		}
 	}
 }
@@ -1020,7 +1019,7 @@ static struct usb_serial_driver spcp8x5_device = {
 	.write_bulk_callback	= spcp8x5_write_bulk_callback,
 	.chars_in_buffer 	= spcp8x5_chars_in_buffer,
 	.attach 		= spcp8x5_startup,
-	.shutdown 		= spcp8x5_shutdown,
+	.release 		= spcp8x5_release,
 };
 
 static int __init spcp8x5_init(void)
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 8b07ebc6bae..6157fac9366 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -267,7 +267,7 @@ error:
 	return retval;
 }
 
-static void symbol_shutdown(struct usb_serial *serial)
+static void symbol_disconnect(struct usb_serial *serial)
 {
 	struct symbol_private *priv = usb_get_serial_data(serial);
 
@@ -275,9 +275,16 @@ static void symbol_shutdown(struct usb_serial *serial)
 
 	usb_kill_urb(priv->int_urb);
 	usb_free_urb(priv->int_urb);
+}
+
+static void symbol_release(struct usb_serial *serial)
+{
+	struct symbol_private *priv = usb_get_serial_data(serial);
+
+	dbg("%s", __func__);
+
 	kfree(priv->int_buffer);
 	kfree(priv);
-	usb_set_serial_data(serial, NULL);
 }
 
 static struct usb_driver symbol_driver = {
@@ -299,7 +306,8 @@ static struct usb_serial_driver symbol_device = {
 	.attach =		symbol_startup,
 	.open =			symbol_open,
 	.close =		symbol_close,
-	.shutdown =		symbol_shutdown,
+	.disconnect =		symbol_disconnect,
+	.release =		symbol_release,
 	.throttle = 		symbol_throttle,
 	.unthrottle =		symbol_unthrottle,
 };
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 42cb04c403b..991d8232e37 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -97,7 +97,7 @@ struct ti_device {
 /* Function Declarations */
 
 static int ti_startup(struct usb_serial *serial);
-static void ti_shutdown(struct usb_serial *serial);
+static void ti_release(struct usb_serial *serial);
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
 		struct file *file);
 static void ti_close(struct usb_serial_port *port);
@@ -230,7 +230,7 @@ static struct usb_serial_driver ti_1port_device = {
 	.id_table		= ti_id_table_3410,
 	.num_ports		= 1,
 	.attach			= ti_startup,
-	.shutdown		= ti_shutdown,
+	.release		= ti_release,
 	.open			= ti_open,
 	.close			= ti_close,
 	.write			= ti_write,
@@ -258,7 +258,7 @@ static struct usb_serial_driver ti_2port_device = {
 	.id_table		= ti_id_table_5052,
 	.num_ports		= 2,
 	.attach			= ti_startup,
-	.shutdown		= ti_shutdown,
+	.release		= ti_release,
 	.open			= ti_open,
 	.close			= ti_close,
 	.write			= ti_write,
@@ -473,7 +473,7 @@ free_tdev:
 }
 
 
-static void ti_shutdown(struct usb_serial *serial)
+static void ti_release(struct usb_serial *serial)
 {
 	int i;
 	struct ti_device *tdev = usb_get_serial_data(serial);
@@ -486,12 +486,10 @@ static void ti_shutdown(struct usb_serial *serial)
 		if (tport) {
 			ti_buf_free(tport->tp_write_buf);
 			kfree(tport);
-			usb_set_serial_port_data(serial->port[i], NULL);
 		}
 	}
 
 	kfree(tdev);
-	usb_set_serial_data(serial, NULL);
 }
 
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 1967a7edc10..d595aa5586a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -141,6 +141,14 @@ static void destroy_serial(struct kref *kref)
 	if (serial->minor != SERIAL_TTY_NO_MINOR)
 		return_serial(serial);
 
+	serial->type->release(serial);
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		if (port)
+			put_device(&port->dev);
+	}
+
 	/* If this is a "fake" port, we have to clean it up here, as it will
 	 * not get cleaned up in port_release() as it was never registered with
 	 * the driver core */
@@ -148,9 +156,8 @@ static void destroy_serial(struct kref *kref)
 		for (i = serial->num_ports;
 					i < serial->num_port_pointers; ++i) {
 			port = serial->port[i];
-			if (!port)
-				continue;
-			port_free(port);
+			if (port)
+				port_free(port);
 		}
 	}
 
@@ -1046,10 +1053,15 @@ int usb_serial_probe(struct usb_interface *interface,
 
 		dev_set_name(&port->dev, "ttyUSB%d", port->number);
 		dbg ("%s - registering %s", __func__, dev_name(&port->dev));
+		port->dev_state = PORT_REGISTERING;
 		retval = device_register(&port->dev);
-		if (retval)
+		if (retval) {
 			dev_err(&port->dev, "Error registering port device, "
 				"continuing\n");
+			port->dev_state = PORT_UNREGISTERED;
+		} else {
+			port->dev_state = PORT_REGISTERED;
+		}
 	}
 
 	usb_serial_console_init(debug, minor);
@@ -1113,10 +1125,6 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	serial->disconnected = 1;
 	mutex_unlock(&serial->disc_mutex);
 
-	/* Unfortunately, many of the sub-drivers expect the port structures
-	 * to exist when their shutdown method is called, so we have to go
-	 * through this awkward two-step unregistration procedure.
-	 */
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port) {
@@ -1130,17 +1138,25 @@ void usb_serial_disconnect(struct usb_interface *interface)
 			}
 			kill_traffic(port);
 			cancel_work_sync(&port->work);
-			device_del(&port->dev);
-		}
-	}
-	serial->type->shutdown(serial);
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		if (port) {
-			put_device(&port->dev);
-			serial->port[i] = NULL;
+			if (port->dev_state == PORT_REGISTERED) {
+
+				/* Make sure the port is bound so that the
+				 * driver's port_remove method is called.
+				 */
+				if (!port->dev.driver) {
+					int rc;
+
+					port->dev.driver =
+							&serial->type->driver;
+					rc = device_bind_driver(&port->dev);
+				}
+				port->dev_state = PORT_UNREGISTERING;
+				device_del(&port->dev);
+				port->dev_state = PORT_UNREGISTERED;
+			}
 		}
 	}
+	serial->type->disconnect(serial);
 
 	/* let the last holder of this object
 	 * cause it to be cleaned up */
@@ -1318,7 +1334,8 @@ static void fixup_generic(struct usb_serial_driver *device)
 	set_to_generic_if_null(device, chars_in_buffer);
 	set_to_generic_if_null(device, read_bulk_callback);
 	set_to_generic_if_null(device, write_bulk_callback);
-	set_to_generic_if_null(device, shutdown);
+	set_to_generic_if_null(device, disconnect);
+	set_to_generic_if_null(device, release);
 }
 
 int usb_serial_register(struct usb_serial_driver *driver)
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 6c9cbb59552..614800972dc 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -15,7 +15,19 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
+#define URB_DEBUG_MAX_IN_FLIGHT_URBS	4000
 #define USB_DEBUG_MAX_PACKET_SIZE	8
+#define USB_DEBUG_BRK_SIZE		8
+static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
+	0x00,
+	0xff,
+	0x01,
+	0xfe,
+	0x00,
+	0xfe,
+	0x01,
+	0xff,
+};
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0525, 0x127a) },
@@ -38,6 +50,32 @@ static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
 	return usb_serial_generic_open(tty, port, filp);
 }
 
+/* This HW really does not support a serial break, so one will be
+ * emulated when ever the break state is set to true.
+ */
+static void usb_debug_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	if (!break_state)
+		return;
+	usb_serial_generic_write(tty, port, USB_DEBUG_BRK, USB_DEBUG_BRK_SIZE);
+}
+
+static void usb_debug_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+
+	if (urb->actual_length == USB_DEBUG_BRK_SIZE &&
+	    memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
+		   USB_DEBUG_BRK_SIZE) == 0) {
+		usb_serial_handle_break(port);
+		usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
+		return;
+	}
+
+	usb_serial_generic_read_bulk_callback(urb);
+}
+
 static struct usb_serial_driver debug_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -46,6 +84,9 @@ static struct usb_serial_driver debug_device = {
 	.id_table =		id_table,
 	.num_ports =		1,
 	.open =			usb_debug_open,
+	.max_in_flight_urbs =	URB_DEBUG_MAX_IN_FLIGHT_URBS,
+	.break_ctl =		usb_debug_break_ctl,
+	.read_bulk_callback =	usb_debug_read_bulk_callback,
 };
 
 static int __init debug_init(void)
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index b15f1c0e1d4..f5d0f64dcc5 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -47,7 +47,7 @@ static void visor_unthrottle(struct tty_struct *tty);
 static int  visor_probe(struct usb_serial *serial,
 					const struct usb_device_id *id);
 static int  visor_calc_num_ports(struct usb_serial *serial);
-static void visor_shutdown(struct usb_serial *serial);
+static void visor_release(struct usb_serial *serial);
 static void visor_write_bulk_callback(struct urb *urb);
 static void visor_read_bulk_callback(struct urb *urb);
 static void visor_read_int_callback(struct urb *urb);
@@ -202,7 +202,7 @@ static struct usb_serial_driver handspring_device = {
 	.attach =		treo_attach,
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
-	.shutdown =		visor_shutdown,
+	.release =		visor_release,
 	.write =		visor_write,
 	.write_room =		visor_write_room,
 	.write_bulk_callback =	visor_write_bulk_callback,
@@ -227,7 +227,7 @@ static struct usb_serial_driver clie_5_device = {
 	.attach =		clie_5_attach,
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
-	.shutdown =		visor_shutdown,
+	.release =		visor_release,
 	.write =		visor_write,
 	.write_room =		visor_write_room,
 	.write_bulk_callback =	visor_write_bulk_callback,
@@ -918,7 +918,7 @@ static int clie_5_attach(struct usb_serial *serial)
 	return generic_startup(serial);
 }
 
-static void visor_shutdown(struct usb_serial *serial)
+static void visor_release(struct usb_serial *serial)
 {
 	struct visor_private *priv;
 	int i;
@@ -927,10 +927,7 @@ static void visor_shutdown(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; i++) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			usb_set_serial_port_data(serial->port[i], NULL);
-			kfree(priv);
-		}
+		kfree(priv);
 	}
 }
 
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 7c7295d09f3..8d126dd7a02 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -144,7 +144,7 @@ static int  whiteheat_firmware_attach(struct usb_serial *serial);
 
 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
 static int  whiteheat_attach(struct usb_serial *serial);
-static void whiteheat_shutdown(struct usb_serial *serial);
+static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static void whiteheat_close(struct usb_serial_port *port);
@@ -189,7 +189,7 @@ static struct usb_serial_driver whiteheat_device = {
 	.id_table =		id_table_std,
 	.num_ports =		4,
 	.attach =		whiteheat_attach,
-	.shutdown =		whiteheat_shutdown,
+	.release =		whiteheat_release,
 	.open =			whiteheat_open,
 	.close =		whiteheat_close,
 	.write =		whiteheat_write,
@@ -617,7 +617,7 @@ no_command_buffer:
 }
 
 
-static void whiteheat_shutdown(struct usb_serial *serial)
+static void whiteheat_release(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;
 	struct usb_serial_port *port;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 2dd9bd4bff5..ec17c96371a 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -52,7 +52,7 @@ int usb_stor_euscsi_init(struct us_data *us)
 	us->iobuf[0] = 0x1;
 	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
 			0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
-			0x01, 0x0, us->iobuf, 0x1, 5*HZ);
+			0x01, 0x0, us->iobuf, 0x1, 5000);
 	US_DEBUGP("-- result is %d\n", result);
 
 	return 0;
@@ -80,14 +80,16 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 
 	res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
 			US_BULK_CB_WRAP_LEN, &partial);
-	if(res)
-		return res;
+	if (res)
+		return -EIO;
 
 	US_DEBUGP("Getting status packet...\n");
 	res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
 			US_BULK_CS_WRAP_LEN, &partial);
+	if (res)
+		return -EIO;
 
-	return (res ? -1 : 0);
+	return 0;
 }
 
 /* This places the HUAWEI E220 devices in multi-port mode */
@@ -99,6 +101,6 @@ int usb_stor_huawei_e220_init(struct us_data *us)
 				      USB_REQ_SET_FEATURE,
 				      USB_TYPE_STANDARD | USB_RECIP_DEVICE,
 				      0x01, 0x0, NULL, 0x0, 1000);
-	US_DEBUGP("usb_control_msg performing result is %d\n", result);
-	return (result ? 0 : -1);
+	US_DEBUGP("Huawei mode set result is %d\n", result);
+	return (result ? 0 : -ENODEV);
 }
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index 353f922939a..d41cc0a970f 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -37,7 +37,7 @@ MODULE_PARM_DESC(option_zero_cd, "ZeroCD mode (1=Force Modem (default),"
 
 #define RESPONSE_LEN 1024
 
-static int option_rezero(struct us_data *us, int ep_in, int ep_out)
+static int option_rezero(struct us_data *us)
 {
 	const unsigned char rezero_msg[] = {
 	  0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12,
@@ -54,10 +54,10 @@ static int option_rezero(struct us_data *us, int ep_in, int ep_out)
 	if (buffer == NULL)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	memcpy(buffer, rezero_msg, sizeof (rezero_msg));
+	memcpy(buffer, rezero_msg, sizeof(rezero_msg));
 	result = usb_stor_bulk_transfer_buf(us,
-			usb_sndbulkpipe(us->pusb_dev, ep_out),
-			buffer, sizeof (rezero_msg), NULL);
+			us->send_bulk_pipe,
+			buffer, sizeof(rezero_msg), NULL);
 	if (result != USB_STOR_XFER_GOOD) {
 		result = USB_STOR_XFER_ERROR;
 		goto out;
@@ -66,9 +66,15 @@ static int option_rezero(struct us_data *us, int ep_in, int ep_out)
 	/* Some of the devices need to be asked for a response, but we don't
 	 * care what that response is.
 	 */
-	result = usb_stor_bulk_transfer_buf(us,
-			usb_sndbulkpipe(us->pusb_dev, ep_out),
+	usb_stor_bulk_transfer_buf(us,
+			us->recv_bulk_pipe,
 			buffer, RESPONSE_LEN, NULL);
+
+	/* Read the CSW */
+	usb_stor_bulk_transfer_buf(us,
+			us->recv_bulk_pipe,
+			buffer, 13, NULL);
+
 	result = USB_STOR_XFER_GOOD;
 
 out:
@@ -76,63 +82,75 @@ out:
 	return result;
 }
 
-int option_ms_init(struct us_data *us)
+static int option_inquiry(struct us_data *us)
 {
-	struct usb_device *udev;
-	struct usb_interface *intf;
-	struct usb_host_interface *iface_desc;
-	struct usb_endpoint_descriptor *endpoint = NULL;
-	u8 ep_in = 0, ep_out = 0;
-	int ep_in_size = 0, ep_out_size = 0;
-	int i, result;
-
-	udev = us->pusb_dev;
-	intf = us->pusb_intf;
-
-	/* Ensure it's really a ZeroCD device; devices that are already
-	 * in modem mode return 0xFF for class, subclass, and protocol.
-	 */
-	if (udev->descriptor.bDeviceClass != 0 ||
-	    udev->descriptor.bDeviceSubClass != 0 ||
-	    udev->descriptor.bDeviceProtocol != 0)
-		return USB_STOR_TRANSPORT_GOOD;
+	const unsigned char inquiry_msg[] = {
+	  0x55, 0x53, 0x42, 0x43, 0x12, 0x34, 0x56, 0x78,
+	  0x24, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x12,
+	  0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x00,
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+	};
+	char *buffer;
+	int result;
 
-	US_DEBUGP("Option MS: option_ms_init called\n");
+	US_DEBUGP("Option MS: %s", "device inquiry for vendor name\n");
 
-	/* Find the right mass storage interface */
-	iface_desc = intf->cur_altsetting;
-	if (iface_desc->desc.bInterfaceClass != 0x8 ||
-	    iface_desc->desc.bInterfaceSubClass != 0x6 ||
-	    iface_desc->desc.bInterfaceProtocol != 0x50) {
-		US_DEBUGP("Option MS: mass storage interface not found, no action "
-		          "required\n");
-		return USB_STOR_TRANSPORT_GOOD;
-	}
+	buffer = kzalloc(0x24, GFP_KERNEL);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
 
-	/* Find the mass storage bulk endpoints */
-	for (i = 0; i < iface_desc->desc.bNumEndpoints && (!ep_in_size || !ep_out_size); ++i) {
-		endpoint = &iface_desc->endpoint[i].desc;
-
-		if (usb_endpoint_is_bulk_in(endpoint)) {
-			ep_in = usb_endpoint_num(endpoint);
-			ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize);
-		} else if (usb_endpoint_is_bulk_out(endpoint)) {
-			ep_out = usb_endpoint_num(endpoint);
-			ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize);
-		}
+	memcpy(buffer, inquiry_msg, sizeof(inquiry_msg));
+	result = usb_stor_bulk_transfer_buf(us,
+			us->send_bulk_pipe,
+			buffer, sizeof(inquiry_msg), NULL);
+	if (result != USB_STOR_XFER_GOOD) {
+		result = USB_STOR_XFER_ERROR;
+		goto out;
 	}
 
-	/* Can't find the mass storage endpoints */
-	if (!ep_in_size || !ep_out_size) {
-		US_DEBUGP("Option MS: mass storage endpoints not found, no action "
-		          "required\n");
-		return USB_STOR_TRANSPORT_GOOD;
+	result = usb_stor_bulk_transfer_buf(us,
+			us->recv_bulk_pipe,
+			buffer, 0x24, NULL);
+	if (result != USB_STOR_XFER_GOOD) {
+		result = USB_STOR_XFER_ERROR;
+		goto out;
 	}
 
+	result = memcmp(buffer+8, "Option", 6);
+
+	/* Read the CSW */
+	usb_stor_bulk_transfer_buf(us,
+			us->recv_bulk_pipe,
+			buffer, 13, NULL);
+
+out:
+	kfree(buffer);
+	return result;
+}
+
+
+int option_ms_init(struct us_data *us)
+{
+	int result;
+
+	US_DEBUGP("Option MS: option_ms_init called\n");
+
+	/* Additional test for vendor information via INQUIRY,
+	 * because some vendor/product IDs are ambiguous
+	 */
+	result = option_inquiry(us);
+	if (result != 0) {
+		US_DEBUGP("Option MS: vendor is not Option or not determinable,"
+			  " no action taken\n");
+		return 0;
+	} else
+		US_DEBUGP("Option MS: this is a genuine Option device,"
+			  " proceeding\n");
+
 	/* Force Modem mode */
 	if (option_zero_cd == ZCD_FORCE_MODEM) {
 		US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n");
-		result = option_rezero(us, ep_in, ep_out);
+		result = option_rezero(us);
 		if (result != USB_STOR_XFER_GOOD)
 			US_DEBUGP("Option MS: Failed to switch to modem mode.\n");
 		return -EIO;
@@ -142,6 +160,6 @@ int option_ms_init(struct us_data *us)
 		          " requests it\n");
 	}
 
-	return USB_STOR_TRANSPORT_GOOD;
+	return 0;
 }
 
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 4359a2cb42d..4395c4100ec 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -202,6 +202,6 @@ int sierra_ms_init(struct us_data *us)
 complete:
 	result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
 
-	return USB_STOR_TRANSPORT_GOOD;
+	return 0;
 }
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 4b8b69045fe..1b9c5dd0fb2 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1385,7 +1385,7 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
            "D-Link",
            "USB Mass Storage",
-           US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+           US_SC_DEVICE, US_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
 
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 74712cb8399..932ffdbf86d 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@ config FB_SA1100
 
 config FB_IMX
 	tristate "Motorola i.MX LCD support"
-	depends on FB && (ARCH_IMX || ARCH_MX2)
+	depends on FB && (ARCH_MX1 || ARCH_MX2)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1759,6 +1759,16 @@ config FB_68328
 	  Say Y here if you want to support the built-in frame buffer of
 	  the Motorola 68328 CPU family.
 
+config FB_PXA168
+	tristate "PXA168/910 LCD framebuffer support"
+	depends on FB && (CPU_PXA168 || CPU_PXA910)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Marvell
+	  MMP processor.
+
 config FB_PXA
 	tristate "PXA LCD framebuffer support"
 	depends on FB && ARCH_PXA
@@ -2094,6 +2104,7 @@ config FB_MB862XX_LIME
 	bool "Lime GDC"
 	depends on FB_MB862XX
 	depends on OF && !FB_MB862XX_PCI_GDC
+	depends on PPC
 	select FB_FOREIGN_ENDIAN
 	select FB_LITTLE_ENDIAN
 	---help---
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index d8d0be5151e..01a819f4737 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_FB_GBE)              += gbefb.o
 obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
 obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
 obj-$(CONFIG_FB_PXA)		  += pxafb.o
+obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
 obj-$(CONFIG_FB_W100)		  += w100fb.o
 obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
 obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 6995fe1e86d..0bcc59eb37f 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -859,43 +859,6 @@ acornfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 	return 0;
 }
 
-/*
- * Note that we are entered with the kernel locked.
- */
-static int
-acornfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-{
-	unsigned long off, start;
-	u32 len;
-
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	start = info->fix.smem_start;
-	len = PAGE_ALIGN(start & ~PAGE_MASK) + info->fix.smem_len;
-	start &= PAGE_MASK;
-	if ((vma->vm_end - vma->vm_start + off) > len)
-		return -EINVAL;
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-
-	/* This is an IO map - tell maydump to skip this VMA */
-	vma->vm_flags |= VM_IO;
-
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-
-	/*
-	 * Don't alter the page protection flags; we want to keep the area
-	 * cached for better performance.  This does mean that we may miss
-	 * some updates to the screen occasionally, but process switches
-	 * should cause the caches and buffers to be flushed often enough.
-	 */
-	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-				vma->vm_end - vma->vm_start,
-				vma->vm_page_prot))
-		return -EAGAIN;
-	return 0;
-}
-
 static struct fb_ops acornfb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_check_var	= acornfb_check_var,
@@ -905,7 +868,6 @@ static struct fb_ops acornfb_ops = {
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
 	.fb_imageblit	= cfb_imageblit,
-	.fb_mmap	= acornfb_mmap,
 };
 
 /*
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index d1f80bac54f..fb8163d181a 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -351,7 +351,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	}
 
 	fb->fb.fix.mmio_start	= fb->dev->res.start;
-	fb->fb.fix.mmio_len	= 4096;
+	fb->fb.fix.mmio_len	= resource_size(&fb->dev->res);
 
 	fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
 	if (!fb->regs) {
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 2fb63f6ea2f..5afd64482f5 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -345,7 +345,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 	dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
 	dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
 
-	if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
+	if (PICOS2KHZ(var->pixclock) > clk_value_khz) {
 		dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
 		return -EINVAL;
 	}
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 97a1f095f32..515cf1978d1 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -213,7 +213,6 @@ static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo)
 			 PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb	|
 			 PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb	|
 			 PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb		|
-			 PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb		|
 			 PIXCLKS_CNTL__R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
                 OUTPLL(pllPIXCLKS_CNTL, tmp);
 
@@ -395,7 +394,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
 			PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb      |
 			PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb        |
 			PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb           |
-			PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb);
+			PIXCLKS_CNTL__R300_P2G2CLK_DAC_ALWAYS_ONb);
 		OUTPLL(pllPIXCLKS_CNTL, tmp);
 
 		tmp = INPLL(pllMCLK_MISC);
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 37e60b1d2ed..e49ae5edcc0 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -323,7 +323,6 @@ static int bfin_bf54x_fb_release(struct fb_info *info, int user)
 		bfin_write_EPPI0_CONTROL(0);
 		SSYNC();
 		disable_dma(CH_EPPI0);
-		memset(fbi->fb_buffer, 0, info->fix.smem_len);
 	}
 
 	spin_unlock(&fbi->lock);
@@ -530,7 +529,7 @@ static irqreturn_t bfin_bf54x_irq_error(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __init bfin_bf54x_probe(struct platform_device *pdev)
+static int __devinit bfin_bf54x_probe(struct platform_device *pdev)
 {
 	struct bfin_bf54xfb_info *info;
 	struct fb_info *fbinfo;
@@ -626,14 +625,12 @@ static int __init bfin_bf54x_probe(struct platform_device *pdev)
 		goto out3;
 	}
 
-	memset(info->fb_buffer, 0, fbinfo->fix.smem_len);
-
 	fbinfo->screen_base = (void *)info->fb_buffer;
 	fbinfo->fix.smem_start = (int)info->fb_buffer;
 
 	fbinfo->fbops = &bfin_bf54x_fb_ops;
 
-	fbinfo->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+	fbinfo->pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbinfo->pseudo_palette) {
 		printk(KERN_ERR DRIVER_NAME
 		       "Fail to allocate pseudo_palette\n");
@@ -642,8 +639,6 @@ static int __init bfin_bf54x_probe(struct platform_device *pdev)
 		goto out4;
 	}
 
-	memset(fbinfo->pseudo_palette, 0, sizeof(u32) * 16);
-
 	if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
 	    < 0) {
 		printk(KERN_ERR DRIVER_NAME
@@ -712,7 +707,7 @@ out1:
 	return ret;
 }
 
-static int bfin_bf54x_remove(struct platform_device *pdev)
+static int __devexit bfin_bf54x_remove(struct platform_device *pdev)
 {
 
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
@@ -781,7 +776,7 @@ static int bfin_bf54x_resume(struct platform_device *pdev)
 
 static struct platform_driver bfin_bf54x_driver = {
 	.probe = bfin_bf54x_probe,
-	.remove = bfin_bf54x_remove,
+	.remove = __devexit_p(bfin_bf54x_remove),
 	.suspend = bfin_bf54x_suspend,
 	.resume = bfin_bf54x_resume,
 	.driver = {
@@ -790,7 +785,7 @@ static struct platform_driver bfin_bf54x_driver = {
 		   },
 };
 
-static int __devinit bfin_bf54x_driver_init(void)
+static int __init bfin_bf54x_driver_init(void)
 {
 	return platform_driver_register(&bfin_bf54x_driver);
 }
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index 90cfddabf1f..5cc36cfbf07 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -242,7 +242,6 @@ static int bfin_t350mcqb_fb_release(struct fb_info *info, int user)
 		SSYNC();
 		disable_dma(CH_PPI);
 		bfin_t350mcqb_stop_timers();
-		memset(fbi->fb_buffer, 0, info->fix.smem_len);
 	}
 
 	spin_unlock(&fbi->lock);
@@ -527,8 +526,6 @@ static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev)
 		goto out3;
 	}
 
-	memset(info->fb_buffer, 0, fbinfo->fix.smem_len);
-
 	fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
 	fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
 
@@ -602,7 +599,7 @@ out1:
 	return ret;
 }
 
-static int bfin_t350mcqb_remove(struct platform_device *pdev)
+static int __devexit bfin_t350mcqb_remove(struct platform_device *pdev)
 {
 
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
@@ -637,9 +634,6 @@ static int bfin_t350mcqb_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct fb_info *fbinfo = platform_get_drvdata(pdev);
-	struct bfin_t350mcqbfb_info *info = fbinfo->par;
-
 	bfin_t350mcqb_disable_ppi();
 	disable_dma(CH_PPI);
 	bfin_write_PPI_STATUS(0xFFFF);
@@ -649,9 +643,6 @@ static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t stat
 
 static int bfin_t350mcqb_resume(struct platform_device *pdev)
 {
-	struct fb_info *fbinfo = platform_get_drvdata(pdev);
-	struct bfin_t350mcqbfb_info *info = fbinfo->par;
-
 	enable_dma(CH_PPI);
 	bfin_t350mcqb_enable_ppi();
 
@@ -664,7 +655,7 @@ static int bfin_t350mcqb_resume(struct platform_device *pdev)
 
 static struct platform_driver bfin_t350mcqb_driver = {
 	.probe = bfin_t350mcqb_probe,
-	.remove = bfin_t350mcqb_remove,
+	.remove = __devexit_p(bfin_t350mcqb_remove),
 	.suspend = bfin_t350mcqb_suspend,
 	.resume = bfin_t350mcqb_resume,
 	.driver = {
@@ -673,7 +664,7 @@ static struct platform_driver bfin_t350mcqb_driver = {
 		   },
 };
 
-static int __devinit bfin_t350mcqb_driver_init(void)
+static int __init bfin_t350mcqb_driver_init(void)
 {
 	return platform_driver_register(&bfin_t350mcqb_driver);
 }
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index 1e35ba6f18e..b0b147cb4cb 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -111,9 +111,7 @@ struct bw2_par {
 	u32			flags;
 #define BW2_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 /**
@@ -167,17 +165,15 @@ static int bw2_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct bw2_par *par = (struct bw2_par *)info->par;
 
 	return sbusfb_mmap_helper(bw2_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io,
 				  vma);
 }
 
 static int bw2_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 {
-	struct bw2_par *par = (struct bw2_par *) info->par;
-
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUN2BW, 1, par->fbsize);
+				   FBTYPE_SUN2BW, 1, info->fix.smem_len);
 }
 
 /*
@@ -294,7 +290,7 @@ static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *
 
 	spin_lock_init(&par->lock);
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 1);
@@ -317,13 +313,13 @@ static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *
 			goto out_unmap_regs;
 	}
 
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &bw2_ops;
 
 	info->screen_base = of_ioremap(&op->resource[0], 0,
-				       par->fbsize, "bw2 ram");
+				       info->fix.smem_len, "bw2 ram");
 	if (!info->screen_base)
 		goto out_unmap_regs;
 
@@ -338,12 +334,12 @@ static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *
 	dev_set_drvdata(&op->dev, info);
 
 	printk(KERN_INFO "%s: bwtwo at %lx:%lx\n",
-	       dp->full_name, par->which_io, par->physbase);
+	       dp->full_name, par->which_io, info->fix.smem_start);
 
 	return 0;
 
 out_unmap_screen:
-	of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
 
 out_unmap_regs:
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct bw2_regs));
@@ -363,7 +359,7 @@ static int __devexit bw2_remove(struct of_device *op)
 	unregister_framebuffer(info);
 
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct bw2_regs));
-	of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
 
 	framebuffer_release(info);
 
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index c7ff3c1a266..0c02f8ec4bf 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -562,7 +562,7 @@ static int __devinit alloc_carmine_fb(void __iomem *regs, void __iomem *smem_bas
 	if (ret < 0)
 		goto err_free_fb;
 
-	if (fb_mode > ARRAY_SIZE(carmine_modedb))
+	if (fb_mode >= ARRAY_SIZE(carmine_modedb))
 		fb_mode = CARMINEFB_DEFAULT_VIDEO_MODE;
 
 	par->cur_mode = par->new_mode = ~0;
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index a2d1882791a..fe45a3b8d0e 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -196,9 +196,7 @@ struct cg14_par {
 	u32			flags;
 #define CG14_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		iospace;
-	unsigned long		fbsize;
 
 	struct sbus_mmap_map	mmap_map[CG14_MMAP_ENTRIES];
 
@@ -271,7 +269,7 @@ static int cg14_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct cg14_par *par = (struct cg14_par *) info->par;
 
 	return sbusfb_mmap_helper(par->mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->iospace, vma);
 }
 
@@ -343,7 +341,8 @@ static int cg14_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 
 	default:
 		ret = sbusfb_ioctl_helper(cmd, arg, info,
-					  FBTYPE_MDICOLOR, 8, par->fbsize);
+					  FBTYPE_MDICOLOR, 8,
+					  info->fix.smem_len);
 		break;
 	};
 
@@ -462,7 +461,7 @@ static void cg14_unmap_regs(struct of_device *op, struct fb_info *info,
 			   par->cursor, sizeof(struct cg14_cursor));
 	if (info->screen_base)
 		of_iounmap(&op->resource[1],
-			   info->screen_base, par->fbsize);
+			   info->screen_base, info->fix.smem_len);
 }
 
 static int __devinit cg14_probe(struct of_device *op, const struct of_device_id *match)
@@ -488,14 +487,14 @@ static int __devinit cg14_probe(struct of_device *op, const struct of_device_id
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	if (!strcmp(dp->parent->name, "sbus") ||
 	    !strcmp(dp->parent->name, "sbi")) {
-		par->physbase = op->resource[0].start;
+		info->fix.smem_start = op->resource[0].start;
 		par->iospace = op->resource[0].flags & IORESOURCE_BITS;
 	} else {
-		par->physbase = op->resource[1].start;
+		info->fix.smem_start = op->resource[1].start;
 		par->iospace = op->resource[0].flags & IORESOURCE_BITS;
 	}
 
@@ -507,7 +506,7 @@ static int __devinit cg14_probe(struct of_device *op, const struct of_device_id
 				 sizeof(struct cg14_cursor), "cg14 cursor");
 
 	info->screen_base = of_ioremap(&op->resource[1], 0,
-				       par->fbsize, "cg14 ram");
+				       info->fix.smem_len, "cg14 ram");
 
 	if (!par->regs || !par->clut || !par->cursor || !info->screen_base)
 		goto out_unmap_regs;
@@ -557,7 +556,7 @@ static int __devinit cg14_probe(struct of_device *op, const struct of_device_id
 
 	printk(KERN_INFO "%s: cgfourteen at %lx:%lx, %dMB\n",
 	       dp->full_name,
-	       par->iospace, par->physbase,
+	       par->iospace, info->fix.smem_start,
 	       par->ramsize >> 20);
 
 	return 0;
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index 99f87fb61d0..b2319fa7286 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -118,9 +118,7 @@ struct cg3_par {
 #define CG3_FLAG_BLANKED	0x00000001
 #define CG3_FLAG_RDI		0x00000002
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 /**
@@ -231,17 +229,15 @@ static int cg3_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct cg3_par *par = (struct cg3_par *)info->par;
 
 	return sbusfb_mmap_helper(cg3_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io,
 				  vma);
 }
 
 static int cg3_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 {
-	struct cg3_par *par = (struct cg3_par *) info->par;
-
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUN3COLOR, 8, par->fbsize);
+				   FBTYPE_SUN3COLOR, 8, info->fix.smem_len);
 }
 
 /*
@@ -368,7 +364,7 @@ static int __devinit cg3_probe(struct of_device *op,
 
 	spin_lock_init(&par->lock);
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 8);
@@ -382,7 +378,7 @@ static int __devinit cg3_probe(struct of_device *op,
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	par->regs = of_ioremap(&op->resource[0], CG3_REGS_OFFSET,
 			       sizeof(struct cg3_regs), "cg3 regs");
@@ -392,7 +388,7 @@ static int __devinit cg3_probe(struct of_device *op,
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &cg3_ops;
 	info->screen_base = of_ioremap(&op->resource[0], CG3_RAM_OFFSET,
-				       par->fbsize, "cg3 ram");
+				       info->fix.smem_len, "cg3 ram");
 	if (!info->screen_base)
 		goto out_unmap_regs;
 
@@ -418,7 +414,7 @@ static int __devinit cg3_probe(struct of_device *op,
 	dev_set_drvdata(&op->dev, info);
 
 	printk(KERN_INFO "%s: cg3 at %lx:%lx\n",
-	       dp->full_name, par->which_io, par->physbase);
+	       dp->full_name, par->which_io, info->fix.smem_start);
 
 	return 0;
 
@@ -426,7 +422,7 @@ out_dealloc_cmap:
 	fb_dealloc_cmap(&info->cmap);
 
 out_unmap_screen:
-	of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
 
 out_unmap_regs:
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct cg3_regs));
@@ -447,7 +443,7 @@ static int __devexit cg3_remove(struct of_device *op)
 	fb_dealloc_cmap(&info->cmap);
 
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct cg3_regs));
-	of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
 
 	framebuffer_release(info);
 
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
index 940ec04f0f1..0d47c6030e3 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -263,9 +263,7 @@ struct cg6_par {
 	u32			flags;
 #define CG6_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 static int cg6_sync(struct fb_info *info)
@@ -596,16 +594,14 @@ static int cg6_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct cg6_par *par = (struct cg6_par *)info->par;
 
 	return sbusfb_mmap_helper(cg6_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io, vma);
 }
 
 static int cg6_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 {
-	struct cg6_par *par = (struct cg6_par *)info->par;
-
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUNFAST_COLOR, 8, par->fbsize);
+				   FBTYPE_SUNFAST_COLOR, 8, info->fix.smem_len);
 }
 
 /*
@@ -631,12 +627,12 @@ static void __devinit cg6_init_fix(struct fb_info *info, int linebytes)
 		break;
 	};
 	if (((conf >> CG6_FHC_REV_SHIFT) & CG6_FHC_REV_MASK) >= 11) {
-		if (par->fbsize <= 0x100000)
+		if (info->fix.smem_len <= 0x100000)
 			cg6_card_name = "TGX";
 		else
 			cg6_card_name = "TGX+";
 	} else {
-		if (par->fbsize <= 0x100000)
+		if (info->fix.smem_len <= 0x100000)
 			cg6_card_name = "GX";
 		else
 			cg6_card_name = "GX+";
@@ -738,7 +734,8 @@ static void cg6_unmap_regs(struct of_device *op, struct fb_info *info,
 		of_iounmap(&op->resource[0], par->fhc, sizeof(u32));
 
 	if (info->screen_base)
-		of_iounmap(&op->resource[0], info->screen_base, par->fbsize);
+		of_iounmap(&op->resource[0], info->screen_base,
+			   info->fix.smem_len);
 }
 
 static int __devinit cg6_probe(struct of_device *op,
@@ -759,7 +756,7 @@ static int __devinit cg6_probe(struct of_device *op,
 
 	spin_lock_init(&par->lock);
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 8);
@@ -769,11 +766,11 @@ static int __devinit cg6_probe(struct of_device *op,
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	dblbuf = of_getintprop_default(dp, "dblbuf", 0);
 	if (dblbuf)
-		par->fbsize *= 4;
+		info->fix.smem_len *= 4;
 
 	par->fbc = of_ioremap(&op->resource[0], CG6_FBC_OFFSET,
 				4096, "cgsix fbc");
@@ -792,7 +789,7 @@ static int __devinit cg6_probe(struct of_device *op,
 	info->fbops = &cg6_ops;
 
 	info->screen_base = of_ioremap(&op->resource[0], CG6_RAM_OFFSET,
-					par->fbsize, "cgsix ram");
+					info->fix.smem_len, "cgsix ram");
 	if (!par->fbc || !par->tec || !par->thc ||
 	    !par->bt || !par->fhc || !info->screen_base)
 		goto out_unmap_regs;
@@ -817,7 +814,7 @@ static int __devinit cg6_probe(struct of_device *op,
 
 	printk(KERN_INFO "%s: CGsix [%s] at %lx:%lx\n",
 	       dp->full_name, info->fix.id,
-	       par->which_io, par->physbase);
+	       par->which_io, info->fix.smem_start);
 
 	return 0;
 
diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c
index 777389c4098..57b9d276497 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/chipsfb.c
@@ -414,7 +414,6 @@ chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
 	}
 
 	pci_set_drvdata(dp, p);
-	p->device = &dp->dev;
 
 	init_chips(p, addr);
 
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 8dea2bc9270..eb12182b205 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -280,6 +280,9 @@ static int __init efifb_probe(struct platform_device *dev)
 	info->pseudo_palette = info->par;
 	info->par = NULL;
 
+	info->aperture_base = efifb_fix.smem_start;
+	info->aperture_size = size_total;
+
 	info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
 	if (!info->screen_base) {
 		printk(KERN_ERR "efifb: abort, cannot ioremap video memory "
@@ -337,7 +340,7 @@ static int __init efifb_probe(struct platform_device *dev)
 	info->fbops = &efifb_ops;
 	info->var = efifb_defined;
 	info->fix = efifb_fix;
-	info->flags = FBINFO_FLAG_DEFAULT;
+	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE;
 
 	if ((err = fb_alloc_cmap(&info->cmap, 256, 0)) < 0) {
 		printk(KERN_ERR "efifb: cannot allocate colormap\n");
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index d412a1ddc12..f8a09bf8d0c 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1462,6 +1462,16 @@ static int fb_check_foreignness(struct fb_info *fi)
 	return 0;
 }
 
+static bool fb_do_apertures_overlap(struct fb_info *gen, struct fb_info *hw)
+{
+	/* is the generic aperture base the same as the HW one */
+	if (gen->aperture_base == hw->aperture_base)
+		return true;
+	/* is the generic aperture base inside the hw base->hw base+size */
+	if (gen->aperture_base > hw->aperture_base && gen->aperture_base <= hw->aperture_base + hw->aperture_size)
+		return true;
+	return false;
+}
 /**
  *	register_framebuffer - registers a frame buffer device
  *	@fb_info: frame buffer info structure
@@ -1485,6 +1495,23 @@ register_framebuffer(struct fb_info *fb_info)
 	if (fb_check_foreignness(fb_info))
 		return -ENOSYS;
 
+	/* check all firmware fbs and kick off if the base addr overlaps */
+	for (i = 0 ; i < FB_MAX; i++) {
+		if (!registered_fb[i])
+			continue;
+
+		if (registered_fb[i]->flags & FBINFO_MISC_FIRMWARE) {
+			if (fb_do_apertures_overlap(registered_fb[i], fb_info)) {
+				printk(KERN_ERR "fb: conflicting fb hw usage "
+				       "%s vs %s - removing generic driver\n",
+				       fb_info->fix.id,
+				       registered_fb[i]->fix.id);
+				unregister_framebuffer(registered_fb[i]);
+				break;
+			}
+		}
+	}
+
 	num_registered_fb++;
 	for (i = 0 ; i < FB_MAX; i++)
 		if (!registered_fb[i])
@@ -1586,6 +1613,10 @@ unregister_framebuffer(struct fb_info *fb_info)
 	device_destroy(fb_class, MKDEV(FB_MAJOR, i));
 	event.info = fb_info;
 	fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
+
+	/* this may free fb info */
+	if (fb_info->fbops->fb_destroy)
+		fb_info->fbops->fb_destroy(fb_info);
 done:
 	return ret;
 }
diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c
index 3a81060137a..15d20010944 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/igafb.c
@@ -395,17 +395,16 @@ int __init igafb_init(void)
 	/* We leak a reference here but as it cannot be unloaded this is
 	   fine. If you write unload code remember to free it in unload */
 	
-	size = sizeof(struct fb_info) + sizeof(struct iga_par) + sizeof(u32)*16;
+	size = sizeof(struct iga_par) + sizeof(u32)*16;
 
-        info = kzalloc(size, GFP_ATOMIC);
+	info = framebuffer_alloc(size, &pdev->dev);
         if (!info) {
                 printk("igafb_init: can't alloc fb_info\n");
 		 pci_dev_put(pdev);
                 return -ENOMEM;
         }
 
-	par = (struct iga_par *) (info + 1);
-	
+	par = info->par;
 
 	if ((addr = pdev->resource[0].start) == 0) {
                 printk("igafb_init: no memory start\n");
@@ -526,7 +525,6 @@ int __init igafb_init(void)
 	info->var = default_var;
 	info->fix = igafb_fix;
 	info->pseudo_palette = (void *)(par + 1);
-	info->device = &pdev->dev;
 
 	if (!iga_init(info, par)) {
 		iounmap((void *)par->io_base);
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c
index ace14fe02fc..0cafd642fbc 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/intelfb/intelfbdrv.c
@@ -1365,6 +1365,11 @@ static int intelfb_set_par(struct fb_info *info)
 	DBG_MSG("intelfb_set_par (%dx%d-%d)\n", info->var.xres,
 		info->var.yres, info->var.bits_per_pixel);
 
+	/*
+	 * Disable VCO prior to timing register change.
+	 */
+	OUTREG(DPLL_A, INREG(DPLL_A) & ~DPLL_VCO_ENABLE);
+
 	intelfb_blank(FB_BLANK_POWERDOWN, info);
 
 	if (ACCEL(dinfo, info))
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 7c7e8c2da9d..e145e2d16fe 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -191,9 +191,7 @@ struct leo_par {
 	u32			flags;
 #define LEO_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 static void leo_wait(struct leo_lx_krn __iomem *lx_krn)
@@ -420,16 +418,14 @@ static int leo_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct leo_par *par = (struct leo_par *)info->par;
 
 	return sbusfb_mmap_helper(leo_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io, vma);
 }
 
 static int leo_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
 {
-	struct leo_par *par = (struct leo_par *) info->par;
-
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUNLEO, 32, par->fbsize);
+				   FBTYPE_SUNLEO, 32, info->fix.smem_len);
 }
 
 /*
@@ -569,7 +565,7 @@ static int __devinit leo_probe(struct of_device *op,
 
 	spin_lock_init(&par->lock);
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 32);
@@ -577,7 +573,7 @@ static int __devinit leo_probe(struct of_device *op,
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	par->lc_ss0_usr =
 		of_ioremap(&op->resource[0], LEO_OFF_LC_SS0_USR,
@@ -627,7 +623,7 @@ static int __devinit leo_probe(struct of_device *op,
 
 	printk(KERN_INFO "%s: leo at %lx:%lx\n",
 	       dp->full_name,
-	       par->which_io, par->physbase);
+	       par->which_io, info->fix.smem_start);
 
 	return 0;
 
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index b91251d1fe4..3b437813584 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -37,22 +37,24 @@ extra-y += $(call logo-cfiles,_clut224,ppm)
 # Gray 256
 extra-y += $(call logo-cfiles,_gray256,pgm)
 
+pnmtologo := scripts/pnmtologo
+
 # Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..."
 quiet_cmd_logo = LOGO    $@
-	cmd_logo = scripts/pnmtologo \
+	cmd_logo = $(pnmtologo) \
 			-t $(patsubst $*_%,%,$(notdir $(basename $<))) \
 			-n $(notdir $(basename $<)) -o $@ $<
 
-$(obj)/%_mono.c: $(src)/%_mono.pbm FORCE
+$(obj)/%_mono.c: $(src)/%_mono.pbm $(pnmtologo) FORCE
 	$(call if_changed,logo)
 
-$(obj)/%_vga16.c: $(src)/%_vga16.ppm FORCE
+$(obj)/%_vga16.c: $(src)/%_vga16.ppm $(pnmtologo) FORCE
 	$(call if_changed,logo)
 
-$(obj)/%_clut224.c: $(src)/%_clut224.ppm FORCE
+$(obj)/%_clut224.c: $(src)/%_clut224.ppm $(pnmtologo) FORCE
 	$(call if_changed,logo)
 
-$(obj)/%_gray256.c: $(src)/%_gray256.pgm FORCE
+$(obj)/%_gray256.c: $(src)/%_gray256.pgm $(pnmtologo) FORCE
 	$(call if_changed,logo)
 
 # Files generated that shall be removed upon make clean
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index 2e85a2b52d0..ea7a8ccc830 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -21,21 +21,6 @@
 #include <asm/bootinfo.h>
 #endif
 
-extern const struct linux_logo logo_linux_mono;
-extern const struct linux_logo logo_linux_vga16;
-extern const struct linux_logo logo_linux_clut224;
-extern const struct linux_logo logo_blackfin_vga16;
-extern const struct linux_logo logo_blackfin_clut224;
-extern const struct linux_logo logo_dec_clut224;
-extern const struct linux_logo logo_mac_clut224;
-extern const struct linux_logo logo_parisc_clut224;
-extern const struct linux_logo logo_sgi_clut224;
-extern const struct linux_logo logo_sun_clut224;
-extern const struct linux_logo logo_superh_mono;
-extern const struct linux_logo logo_superh_vga16;
-extern const struct linux_logo logo_superh_clut224;
-extern const struct linux_logo logo_m32r_clut224;
-
 static int nologo;
 module_param(nologo, bool, 0);
 MODULE_PARM_DESC(nologo, "Disables startup logo");
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index fb64234a382..a28e3cfbbf7 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -19,7 +19,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
-#if defined(CONFIG_PPC_OF)
+#if defined(CONFIG_OF)
 #include <linux/of_platform.h>
 #endif
 #include "mb862xxfb.h"
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 16186240c5f..34e4e799516 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -264,6 +264,14 @@ static const struct fb_videomode modedb[] = {
 	/* 1280x800, 60 Hz, 47.403 kHz hsync, WXGA 16:10 aspect ratio */
 	NULL, 60, 1280, 800, 12048, 200, 64, 24, 1, 136, 3,
 	0, FB_VMODE_NONINTERLACED
+    }, {
+       /* 720x576i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */
+       NULL, 50, 720, 576, 74074, 64, 16, 39, 5, 64, 5,
+       0, FB_VMODE_INTERLACED
+    }, {
+       /* 800x520i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */
+       NULL, 50, 800, 520, 58823, 144, 64, 72, 28, 80, 5,
+       0, FB_VMODE_INTERLACED
     },
 };
 
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 9894de1c9b9..b7af5256e88 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -706,7 +706,7 @@ static void mx3fb_dma_done(void *arg)
 	dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
 
 	/* We only need one interrupt, it will be re-enabled as needed */
-	disable_irq(ichannel->eof_irq);
+	disable_irq_nosync(ichannel->eof_irq);
 
 	complete(&mx3_fbi->flip_cmpl);
 }
@@ -1366,7 +1366,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 
 	mx3fb_blank(FB_BLANK_UNBLANK, fbi);
 
-	dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+	dev_info(dev, "registered, using mode %s\n", fb_mode);
 
 	ret = register_framebuffer(fbi);
 	if (ret < 0)
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index e1d9eeb1aea..4d8c54c23dd 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -378,7 +378,6 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 	struct fb_fix_screeninfo *fix;
 	struct fb_var_screeninfo *var;
 	struct fb_info *info;
-	int size;
 
 	if (!request_mem_region(res_start, res_size, "offb"))
 		return;
@@ -393,15 +392,12 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 		return;
 	}
 
-	size = sizeof(struct fb_info) + sizeof(u32) * 16;
-
-	info = kmalloc(size, GFP_ATOMIC);
+	info = framebuffer_alloc(sizeof(u32) * 16, NULL);
 	
 	if (info == 0) {
 		release_mem_region(res_start, res_size);
 		return;
 	}
-	memset(info, 0, size);
 
 	fix = &info->fix;
 	var = &info->var;
@@ -497,7 +493,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 		iounmap(par->cmap_adr);
 		par->cmap_adr = NULL;
 		iounmap(info->screen_base);
-		kfree(info);
+		framebuffer_release(info);
 		release_mem_region(res_start, res_size);
 		return;
 	}
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 8aa6e47202b..5d4f34887a2 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -133,8 +133,7 @@ struct {
 	struct lcd_ctrl_extif	*extif;
 	struct lcd_ctrl		*int_ctrl;
 
-	void			(*power_up)(struct device *dev);
-	void			(*power_down)(struct device *dev);
+	struct clk		*sys_ck;
 } hwa742;
 
 struct lcd_ctrl hwa742_ctrl;
@@ -915,14 +914,13 @@ static void hwa742_suspend(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	/* Enable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 static void hwa742_resume(void)
 {
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(hwa742.fbdev->dev);
+	clk_enable(hwa742.sys_ck);
+
 	/* Disable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 0);
 	while (1) {
@@ -955,14 +953,13 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	omapfb_conf = fbdev->dev->platform_data;
 	ctrl_conf = omapfb_conf->ctrl_platform_data;
 
-	if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
+	if (ctrl_conf == NULL) {
 		dev_err(fbdev->dev, "HWA742: missing platform data\n");
 		r = -ENOENT;
 		goto err1;
 	}
 
-	hwa742.power_down = ctrl_conf->power_down;
-	hwa742.power_up = ctrl_conf->power_up;
+	hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
 
 	spin_lock_init(&hwa742.req_lock);
 
@@ -972,12 +969,11 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	if ((r = hwa742.extif->init(fbdev)) < 0)
 		goto err2;
 
-	ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
+	ext_clk = clk_get_rate(hwa742.sys_ck);
 	if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
 		goto err3;
 	hwa742.extif->set_timings(&hwa742.reg_timings);
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(fbdev->dev);
+	clk_enable(hwa742.sys_ck);
 
 	calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
 	if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
@@ -1040,8 +1036,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 
 	return 0;
 err4:
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 err3:
 	hwa742.extif->cleanup();
 err2:
@@ -1055,8 +1050,7 @@ static void hwa742_cleanup(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	hwa742.extif->cleanup();
 	hwa742.int_ctrl->cleanup();
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 struct lcd_ctrl hwa742_ctrl = {
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index 7000f2cd585..7fa4ab01b0d 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -134,9 +134,7 @@ struct p9100_par {
 	u32			flags;
 #define P9100_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 };
 
 /**
@@ -224,18 +222,16 @@ static int p9100_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct p9100_par *par = (struct p9100_par *)info->par;
 
 	return sbusfb_mmap_helper(p9100_mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io, vma);
 }
 
 static int p9100_ioctl(struct fb_info *info, unsigned int cmd,
 		       unsigned long arg)
 {
-	struct p9100_par *par = (struct p9100_par *) info->par;
-
 	/* Make it look like a cg3. */
 	return sbusfb_ioctl_helper(cmd, arg, info,
-				   FBTYPE_SUN3COLOR, 8, par->fbsize);
+				   FBTYPE_SUN3COLOR, 8, info->fix.smem_len);
 }
 
 /*
@@ -271,7 +267,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
 	spin_lock_init(&par->lock);
 
 	/* This is the framebuffer and the only resource apps can mmap.  */
-	par->physbase = op->resource[2].start;
+	info->fix.smem_start = op->resource[2].start;
 	par->which_io = op->resource[2].flags & IORESOURCE_BITS;
 
 	sbusfb_fill_var(&info->var, dp, 8);
@@ -280,7 +276,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
 	info->var.blue.length = 8;
 
 	linebytes = of_getintprop_default(dp, "linebytes", info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	par->regs = of_ioremap(&op->resource[0], 0,
 			       sizeof(struct p9100_regs), "p9100 regs");
@@ -290,7 +286,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &p9100_ops;
 	info->screen_base = of_ioremap(&op->resource[2], 0,
-				       par->fbsize, "p9100 ram");
+				       info->fix.smem_len, "p9100 ram");
 	if (!info->screen_base)
 		goto out_unmap_regs;
 
@@ -311,7 +307,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
 
 	printk(KERN_INFO "%s: p9100 at %lx:%lx\n",
 	       dp->full_name,
-	       par->which_io, par->physbase);
+	       par->which_io, info->fix.smem_start);
 
 	return 0;
 
@@ -319,7 +315,7 @@ out_dealloc_cmap:
 	fb_dealloc_cmap(&info->cmap);
 
 out_unmap_screen:
-	of_iounmap(&op->resource[2], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[2], info->screen_base, info->fix.smem_len);
 
 out_unmap_regs:
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct p9100_regs));
@@ -340,7 +336,7 @@ static int __devexit p9100_remove(struct of_device *op)
 	fb_dealloc_cmap(&info->cmap);
 
 	of_iounmap(&op->resource[0], par->regs, sizeof(struct p9100_regs));
-	of_iounmap(&op->resource[2], info->screen_base, par->fbsize);
+	of_iounmap(&op->resource[2], info->screen_base, info->fix.smem_len);
 
 	framebuffer_release(info);
 
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index c6dd924976a..36436ee6c1a 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -1748,7 +1748,7 @@ static void __devexit pm2fb_remove(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 	fb_dealloc_cmap(&info->cmap);
 	kfree(info->pixmap.addr);
-	kfree(info);
+	framebuffer_release(info);
 }
 
 static struct pci_device_id pm2fb_id_table[] = {
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index e00c1dff55d..c0af638fe70 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -32,25 +32,16 @@
 #include <linux/init.h>
 
 #include <asm/abs_addr.h>
+#include <asm/iommu.h>
 #include <asm/lv1call.h>
 #include <asm/ps3av.h>
 #include <asm/ps3fb.h>
 #include <asm/ps3.h>
+#include <asm/ps3gpu.h>
 
 
 #define DEVICE_NAME		"ps3fb"
 
-#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC	0x101
-#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP	0x102
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP	0x600
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT		0x601
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT_SYNC	0x602
-
-#define L1GPU_FB_BLIT_WAIT_FOR_COMPLETION	(1ULL << 32)
-
-#define L1GPU_DISPLAY_SYNC_HSYNC		1
-#define L1GPU_DISPLAY_SYNC_VSYNC		2
-
 #define GPU_CMD_BUF_SIZE			(2 * 1024 * 1024)
 #define GPU_FB_START				(64 * 1024)
 #define GPU_IOIF				(0x0d000000UL)
@@ -462,33 +453,27 @@ static void ps3fb_sync_image(struct device *dev, u64 frame_offset,
 	src_offset += GPU_FB_START;
 
 	mutex_lock(&ps3_gpu_mutex);
-	status = lv1_gpu_context_attribute(ps3fb.context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
-					   dst_offset, GPU_IOIF + src_offset,
-					   L1GPU_FB_BLIT_WAIT_FOR_COMPLETION |
-					   (width << 16) | height,
-					   line_length);
+	status = lv1_gpu_fb_blit(ps3fb.context_handle, dst_offset,
+				 GPU_IOIF + src_offset,
+				 L1GPU_FB_BLIT_WAIT_FOR_COMPLETION |
+				 (width << 16) | height,
+				 line_length);
 	mutex_unlock(&ps3_gpu_mutex);
 
 	if (status)
-		dev_err(dev,
-			"%s: lv1_gpu_context_attribute FB_BLIT failed: %d\n",
-			__func__, status);
+		dev_err(dev, "%s: lv1_gpu_fb_blit failed: %d\n", __func__,
+			status);
 #ifdef HEAD_A
-	status = lv1_gpu_context_attribute(ps3fb.context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP,
-					   0, frame_offset, 0, 0);
+	status = lv1_gpu_display_flip(ps3fb.context_handle, 0, frame_offset);
 	if (status)
-		dev_err(dev, "%s: lv1_gpu_context_attribute FLIP failed: %d\n",
-			__func__, status);
+		dev_err(dev, "%s: lv1_gpu_display_flip failed: %d\n", __func__,
+			status);
 #endif
 #ifdef HEAD_B
-	status = lv1_gpu_context_attribute(ps3fb.context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP,
-					   1, frame_offset, 0, 0);
+	status = lv1_gpu_display_flip(ps3fb.context_handle, 1, frame_offset);
 	if (status)
-		dev_err(dev, "%s: lv1_gpu_context_attribute FLIP failed: %d\n",
-			__func__, status);
+		dev_err(dev, "%s: lv1_gpu_display_flip failed: %d\n", __func__,
+			status);
 #endif
 }
 
@@ -956,73 +941,6 @@ static irqreturn_t ps3fb_vsync_interrupt(int irq, void *ptr)
 }
 
 
-static int ps3fb_vsync_settings(struct gpu_driver_info *dinfo,
-				struct device *dev)
-{
-	int error;
-
-	dev_dbg(dev, "version_driver:%x\n", dinfo->version_driver);
-	dev_dbg(dev, "irq outlet:%x\n", dinfo->irq.irq_outlet);
-	dev_dbg(dev,
-		"version_gpu: %x memory_size: %x ch: %x core_freq: %d "
-		"mem_freq:%d\n",
-		dinfo->version_gpu, dinfo->memory_size, dinfo->hardware_channel,
-		dinfo->nvcore_frequency/1000000, dinfo->memory_frequency/1000000);
-
-	if (dinfo->version_driver != GPU_DRIVER_INFO_VERSION) {
-		dev_err(dev, "%s: version_driver err:%x\n", __func__,
-			dinfo->version_driver);
-		return -EINVAL;
-	}
-
-	error = ps3_irq_plug_setup(PS3_BINDING_CPU_ANY, dinfo->irq.irq_outlet,
-				   &ps3fb.irq_no);
-	if (error) {
-		dev_err(dev, "%s: ps3_alloc_irq failed %d\n", __func__, error);
-		return error;
-	}
-
-	error = request_irq(ps3fb.irq_no, ps3fb_vsync_interrupt, IRQF_DISABLED,
-			    DEVICE_NAME, dev);
-	if (error) {
-		dev_err(dev, "%s: request_irq failed %d\n", __func__, error);
-		ps3_irq_plug_destroy(ps3fb.irq_no);
-		return error;
-	}
-
-	dinfo->irq.mask = (1 << GPU_INTR_STATUS_VSYNC_1) |
-			  (1 << GPU_INTR_STATUS_FLIP_1);
-	return 0;
-}
-
-static int ps3fb_xdr_settings(u64 xdr_lpar, struct device *dev)
-{
-	int status;
-
-	status = lv1_gpu_context_iomap(ps3fb.context_handle, GPU_IOIF,
-				       xdr_lpar, ps3fb_videomemory.size, 0);
-	if (status) {
-		dev_err(dev, "%s: lv1_gpu_context_iomap failed: %d\n",
-			__func__, status);
-		return -ENXIO;
-	}
-	dev_dbg(dev, "video:%p ioif:%lx lpar:%llx size:%lx\n",
-		ps3fb_videomemory.address, GPU_IOIF, xdr_lpar,
-		ps3fb_videomemory.size);
-
-	status = lv1_gpu_context_attribute(ps3fb.context_handle,
-					   L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP,
-					   xdr_lpar, GPU_CMD_BUF_SIZE,
-					   GPU_IOIF, 0);
-	if (status) {
-		dev_err(dev,
-			"%s: lv1_gpu_context_attribute FB_SETUP failed: %d\n",
-			__func__, status);
-		return -ENXIO;
-	}
-	return 0;
-}
-
 static struct fb_ops ps3fb_ops = {
 	.fb_open	= ps3fb_open,
 	.fb_release	= ps3fb_release,
@@ -1048,49 +966,18 @@ static struct fb_fix_screeninfo ps3fb_fix __initdata = {
 	.accel =	FB_ACCEL_NONE,
 };
 
-static int ps3fb_set_sync(struct device *dev)
-{
-	int status;
-
-#ifdef HEAD_A
-	status = lv1_gpu_context_attribute(0x0,
-					   L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC,
-					   0, L1GPU_DISPLAY_SYNC_VSYNC, 0, 0);
-	if (status) {
-		dev_err(dev,
-			"%s: lv1_gpu_context_attribute DISPLAY_SYNC failed: "
-			"%d\n",
-			__func__, status);
-		return -1;
-	}
-#endif
-#ifdef HEAD_B
-	status = lv1_gpu_context_attribute(0x0,
-					   L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC,
-					   1, L1GPU_DISPLAY_SYNC_VSYNC, 0, 0);
-
-	if (status) {
-		dev_err(dev,
-			"%s: lv1_gpu_context_attribute DISPLAY_SYNC failed: "
-			"%d\n",
-			__func__, status);
-		return -1;
-	}
-#endif
-	return 0;
-}
-
 static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 {
 	struct fb_info *info;
 	struct ps3fb_par *par;
-	int retval = -ENOMEM;
+	int retval;
 	u64 ddr_lpar = 0;
 	u64 lpar_dma_control = 0;
 	u64 lpar_driver_info = 0;
 	u64 lpar_reports = 0;
 	u64 lpar_reports_size = 0;
 	u64 xdr_lpar;
+	struct gpu_driver_info *dinfo;
 	void *fb_start;
 	int status;
 	struct task_struct *task;
@@ -1101,8 +988,8 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 		return -ENOMEM;
 	}
 
-	status = ps3_open_hv_device(dev);
-	if (status) {
+	retval = ps3_open_hv_device(dev);
+	if (retval) {
 		dev_err(&dev->core, "%s: ps3_open_hv_device failed\n",
 			__func__);
 		goto err;
@@ -1116,7 +1003,24 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 	atomic_set(&ps3fb.ext_flip, 0);	/* for flip with vsync */
 	init_waitqueue_head(&ps3fb.wait_vsync);
 
-	ps3fb_set_sync(&dev->core);
+#ifdef HEAD_A
+	status = lv1_gpu_display_sync(0x0, 0, L1GPU_DISPLAY_SYNC_VSYNC);
+	if (status) {
+		dev_err(&dev->core, "%s: lv1_gpu_display_sync failed: %d\n",
+			__func__, status);
+		retval = -ENODEV;
+		goto err_close_device;
+	}
+#endif
+#ifdef HEAD_B
+	status = lv1_gpu_display_sync(0x0, 1, L1GPU_DISPLAY_SYNC_VSYNC);
+	if (status) {
+		dev_err(&dev->core, "%s: lv1_gpu_display_sync failed: %d\n",
+			__func__, status);
+		retval = -ENODEV;
+		goto err_close_device;
+	}
+#endif
 
 	max_ps3fb_size = _ALIGN_UP(GPU_IOIF, 256*1024*1024) - GPU_IOIF;
 	if (ps3fb_videomemory.size > max_ps3fb_size) {
@@ -1131,7 +1035,7 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 	if (status) {
 		dev_err(&dev->core, "%s: lv1_gpu_memory_allocate failed: %d\n",
 			__func__, status);
-		goto err;
+		goto err_close_device;
 	}
 	dev_dbg(&dev->core, "ddr:lpar:0x%llx\n", ddr_lpar);
 
@@ -1141,33 +1045,85 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 					  &lpar_reports, &lpar_reports_size);
 	if (status) {
 		dev_err(&dev->core,
-			"%s: lv1_gpu_context_attribute failed: %d\n", __func__,
+			"%s: lv1_gpu_context_allocate failed: %d\n", __func__,
 			status);
 		goto err_gpu_memory_free;
 	}
 
 	/* vsync interrupt */
-	ps3fb.dinfo = (void __force *)ioremap(lpar_driver_info, 128 * 1024);
-	if (!ps3fb.dinfo) {
+	dinfo = (void __force *)ioremap(lpar_driver_info, 128 * 1024);
+	if (!dinfo) {
 		dev_err(&dev->core, "%s: ioremap failed\n", __func__);
 		goto err_gpu_context_free;
 	}
 
-	retval = ps3fb_vsync_settings(ps3fb.dinfo, &dev->core);
-	if (retval)
+	ps3fb.dinfo = dinfo;
+	dev_dbg(&dev->core, "version_driver:%x\n", dinfo->version_driver);
+	dev_dbg(&dev->core, "irq outlet:%x\n", dinfo->irq.irq_outlet);
+	dev_dbg(&dev->core, "version_gpu: %x memory_size: %x ch: %x "
+		"core_freq: %d mem_freq:%d\n", dinfo->version_gpu,
+		dinfo->memory_size, dinfo->hardware_channel,
+		dinfo->nvcore_frequency/1000000,
+		dinfo->memory_frequency/1000000);
+
+	if (dinfo->version_driver != GPU_DRIVER_INFO_VERSION) {
+		dev_err(&dev->core, "%s: version_driver err:%x\n", __func__,
+			dinfo->version_driver);
+		retval = -EINVAL;
+		goto err_iounmap_dinfo;
+	}
+
+	retval = ps3_irq_plug_setup(PS3_BINDING_CPU_ANY, dinfo->irq.irq_outlet,
+				    &ps3fb.irq_no);
+	if (retval) {
+		dev_err(&dev->core, "%s: ps3_alloc_irq failed %d\n", __func__,
+			retval);
 		goto err_iounmap_dinfo;
+	}
+
+	retval = request_irq(ps3fb.irq_no, ps3fb_vsync_interrupt,
+			     IRQF_DISABLED, DEVICE_NAME, &dev->core);
+	if (retval) {
+		dev_err(&dev->core, "%s: request_irq failed %d\n", __func__,
+			retval);
+		goto err_destroy_plug;
+	}
+
+	dinfo->irq.mask = (1 << GPU_INTR_STATUS_VSYNC_1) |
+			  (1 << GPU_INTR_STATUS_FLIP_1);
 
 	/* Clear memory to prevent kernel info leakage into userspace */
 	memset(ps3fb_videomemory.address, 0, ps3fb_videomemory.size);
 
 	xdr_lpar = ps3_mm_phys_to_lpar(__pa(ps3fb_videomemory.address));
-	retval = ps3fb_xdr_settings(xdr_lpar, &dev->core);
-	if (retval)
+
+	status = lv1_gpu_context_iomap(ps3fb.context_handle, GPU_IOIF,
+				       xdr_lpar, ps3fb_videomemory.size,
+				       CBE_IOPTE_PP_W | CBE_IOPTE_PP_R |
+				       CBE_IOPTE_M);
+	if (status) {
+		dev_err(&dev->core, "%s: lv1_gpu_context_iomap failed: %d\n",
+			__func__, status);
+		retval =  -ENXIO;
 		goto err_free_irq;
+	}
+
+	dev_dbg(&dev->core, "video:%p ioif:%lx lpar:%llx size:%lx\n",
+		ps3fb_videomemory.address, GPU_IOIF, xdr_lpar,
+		ps3fb_videomemory.size);
+
+	status = lv1_gpu_fb_setup(ps3fb.context_handle, xdr_lpar,
+				  GPU_CMD_BUF_SIZE, GPU_IOIF);
+	if (status) {
+		dev_err(&dev->core, "%s: lv1_gpu_fb_setup failed: %d\n",
+			__func__, status);
+		retval = -ENXIO;
+		goto err_context_unmap;
+	}
 
 	info = framebuffer_alloc(sizeof(struct ps3fb_par), &dev->core);
 	if (!info)
-		goto err_free_irq;
+		goto err_context_fb_close;
 
 	par = info->par;
 	par->mode_id = ~ps3fb_mode;	/* != ps3fb_mode, to trigger change */
@@ -1210,7 +1166,7 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
 	if (retval < 0)
 		goto err_fb_dealloc;
 
-	dev->core.driver_data = info;
+	ps3_system_bus_set_drvdata(dev, info);
 
 	dev_info(info->device, "%s %s, using %u KiB of video memory\n",
 		 dev_driver_string(info->dev), dev_name(info->dev),
@@ -1232,8 +1188,14 @@ err_fb_dealloc:
 	fb_dealloc_cmap(&info->cmap);
 err_framebuffer_release:
 	framebuffer_release(info);
+err_context_fb_close:
+	lv1_gpu_fb_close(ps3fb.context_handle);
+err_context_unmap:
+	lv1_gpu_context_iomap(ps3fb.context_handle, GPU_IOIF, xdr_lpar,
+			      ps3fb_videomemory.size, CBE_IOPTE_M);
 err_free_irq:
 	free_irq(ps3fb.irq_no, &dev->core);
+err_destroy_plug:
 	ps3_irq_plug_destroy(ps3fb.irq_no);
 err_iounmap_dinfo:
 	iounmap((u8 __force __iomem *)ps3fb.dinfo);
@@ -1241,14 +1203,16 @@ err_gpu_context_free:
 	lv1_gpu_context_free(ps3fb.context_handle);
 err_gpu_memory_free:
 	lv1_gpu_memory_free(ps3fb.memory_handle);
+err_close_device:
+	ps3_close_hv_device(dev);
 err:
 	return retval;
 }
 
 static int ps3fb_shutdown(struct ps3_system_bus_device *dev)
 {
-	int status;
-	struct fb_info *info = dev->core.driver_data;
+	struct fb_info *info = ps3_system_bus_get_drvdata(dev);
+	u64 xdr_lpar = ps3_mm_phys_to_lpar(__pa(ps3fb_videomemory.address));
 
 	dev_dbg(&dev->core, " -> %s:%d\n", __func__, __LINE__);
 
@@ -1268,20 +1232,14 @@ static int ps3fb_shutdown(struct ps3_system_bus_device *dev)
 		unregister_framebuffer(info);
 		fb_dealloc_cmap(&info->cmap);
 		framebuffer_release(info);
-		info = dev->core.driver_data = NULL;
+		ps3_system_bus_set_drvdata(dev, NULL);
 	}
 	iounmap((u8 __force __iomem *)ps3fb.dinfo);
-
-	status = lv1_gpu_context_free(ps3fb.context_handle);
-	if (status)
-		dev_dbg(&dev->core, "lv1_gpu_context_free failed: %d\n",
-			status);
-
-	status = lv1_gpu_memory_free(ps3fb.memory_handle);
-	if (status)
-		dev_dbg(&dev->core, "lv1_gpu_memory_free failed: %d\n",
-			status);
-
+	lv1_gpu_fb_close(ps3fb.context_handle);
+	lv1_gpu_context_iomap(ps3fb.context_handle, GPU_IOIF, xdr_lpar,
+			      ps3fb_videomemory.size, CBE_IOPTE_M);
+	lv1_gpu_context_free(ps3fb.context_handle);
+	lv1_gpu_memory_free(ps3fb.memory_handle);
 	ps3_close_hv_device(dev);
 	dev_dbg(&dev->core, " <- %s:%d\n", __func__, __LINE__);
 
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
new file mode 100644
index 00000000000..84d8327e47d
--- /dev/null
+++ b/drivers/video/pxa168fb.c
@@ -0,0 +1,803 @@
+/*
+ * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
+ *
+ *  Copyright (C) 2008 Marvell International Ltd.
+ *  All rights reserved.
+ *
+ *  2009-02-16  adapted from original version for PXA168/910
+ *              Jun Nie <njun@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <video/pxa168fb.h>
+
+#include "pxa168fb.h"
+
+#define DEFAULT_REFRESH		60	/* Hz */
+
+static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
+{
+	/*
+	 * Pseudocolor mode?
+	 */
+	if (var->bits_per_pixel == 8)
+		return PIX_FMT_PSEUDOCOLOR;
+
+	/*
+	 * Check for 565/1555.
+	 */
+	if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
+	    var->green.length <= 6 && var->blue.length <= 5) {
+		if (var->transp.length == 0) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB565;
+			else
+				return PIX_FMT_BGR565;
+		}
+
+		if (var->transp.length == 1 && var->green.length <= 5) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB1555;
+			else
+				return PIX_FMT_BGR1555;
+		}
+
+		/* fall through */
+	}
+
+	/*
+	 * Check for 888/A888.
+	 */
+	if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
+	    var->green.length <= 8 && var->blue.length <= 8) {
+		if (var->bits_per_pixel == 24 && var->transp.length == 0) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB888PACK;
+			else
+				return PIX_FMT_BGR888PACK;
+		}
+
+		if (var->bits_per_pixel == 32 && var->transp.length == 8) {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGBA888;
+			else
+				return PIX_FMT_BGRA888;
+		} else {
+			if (var->red.offset >= var->blue.offset)
+				return PIX_FMT_RGB888UNPACK;
+			else
+				return PIX_FMT_BGR888UNPACK;
+		}
+
+		/* fall through */
+	}
+
+	return -EINVAL;
+}
+
+static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
+{
+	switch (pix_fmt) {
+	case PIX_FMT_RGB565:
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;    var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 6;
+		var->blue.offset = 0;    var->blue.length = 5;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_BGR565:
+		var->bits_per_pixel = 16;
+		var->red.offset = 0;     var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 6;
+		var->blue.offset = 11;   var->blue.length = 5;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_RGB1555:
+		var->bits_per_pixel = 16;
+		var->red.offset = 10;    var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 5;
+		var->blue.offset = 0;    var->blue.length = 5;
+		var->transp.offset = 15; var->transp.length = 1;
+		break;
+	case PIX_FMT_BGR1555:
+		var->bits_per_pixel = 16;
+		var->red.offset = 0;     var->red.length = 5;
+		var->green.offset = 5;   var->green.length = 5;
+		var->blue.offset = 10;   var->blue.length = 5;
+		var->transp.offset = 15; var->transp.length = 1;
+		break;
+	case PIX_FMT_RGB888PACK:
+		var->bits_per_pixel = 24;
+		var->red.offset = 16;    var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_BGR888PACK:
+		var->bits_per_pixel = 24;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 16;   var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	case PIX_FMT_RGBA888:
+		var->bits_per_pixel = 32;
+		var->red.offset = 16;    var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 24; var->transp.length = 8;
+		break;
+	case PIX_FMT_BGRA888:
+		var->bits_per_pixel = 32;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 8;   var->green.length = 8;
+		var->blue.offset = 16;   var->blue.length = 8;
+		var->transp.offset = 24; var->transp.length = 8;
+		break;
+	case PIX_FMT_PSEUDOCOLOR:
+		var->bits_per_pixel = 8;
+		var->red.offset = 0;     var->red.length = 8;
+		var->green.offset = 0;   var->green.length = 8;
+		var->blue.offset = 0;    var->blue.length = 8;
+		var->transp.offset = 0;  var->transp.length = 0;
+		break;
+	}
+}
+
+static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
+		     struct fb_videomode *mode, int pix_fmt, int ystretch)
+{
+	struct fb_info *info = fbi->info;
+
+	set_pix_fmt(var, pix_fmt);
+
+	var->xres = mode->xres;
+	var->yres = mode->yres;
+	var->xres_virtual = max(var->xres, var->xres_virtual);
+	if (ystretch)
+		var->yres_virtual = info->fix.smem_len /
+			(var->xres_virtual * (var->bits_per_pixel >> 3));
+	else
+		var->yres_virtual = max(var->yres, var->yres_virtual);
+	var->grayscale = 0;
+	var->accel_flags = FB_ACCEL_NONE;
+	var->pixclock = mode->pixclock;
+	var->left_margin = mode->left_margin;
+	var->right_margin = mode->right_margin;
+	var->upper_margin = mode->upper_margin;
+	var->lower_margin = mode->lower_margin;
+	var->hsync_len = mode->hsync_len;
+	var->vsync_len = mode->vsync_len;
+	var->sync = mode->sync;
+	var->vmode = FB_VMODE_NONINTERLACED;
+	var->rotate = FB_ROTATE_UR;
+}
+
+static int pxa168fb_check_var(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	int pix_fmt;
+
+	/*
+	 * Determine which pixel format we're going to use.
+	 */
+	pix_fmt = determine_best_pix_fmt(var);
+	if (pix_fmt < 0)
+		return pix_fmt;
+	set_pix_fmt(var, pix_fmt);
+	fbi->pix_fmt = pix_fmt;
+
+	/*
+	 * Basic geometry sanity checks.
+	 */
+	if (var->xoffset + var->xres > var->xres_virtual)
+		return -EINVAL;
+	if (var->yoffset + var->yres > var->yres_virtual)
+		return -EINVAL;
+	if (var->xres + var->right_margin +
+	    var->hsync_len + var->left_margin > 2048)
+		return -EINVAL;
+	if (var->yres + var->lower_margin +
+	    var->vsync_len + var->upper_margin > 2048)
+		return -EINVAL;
+
+	/*
+	 * Check size of framebuffer.
+	 */
+	if (var->xres_virtual * var->yres_virtual *
+	    (var->bits_per_pixel >> 3) > info->fix.smem_len)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * The hardware clock divider has an integer and a fractional
+ * stage:
+ *
+ *	clk2 = clk_in / integer_divider
+ *	clk_out = clk2 * (1 - (fractional_divider >> 12))
+ *
+ * Calculate integer and fractional divider for given clk_in
+ * and clk_out.
+ */
+static void set_clock_divider(struct pxa168fb_info *fbi,
+			      const struct fb_videomode *m)
+{
+	int divider_int;
+	int needed_pixclk;
+	u64 div_result;
+	u32 x = 0;
+
+	/*
+	 * Notice: The field pixclock is used by linux fb
+	 * is in pixel second. E.g. struct fb_videomode &
+	 * struct fb_var_screeninfo
+	 */
+
+	/*
+	 * Check input values.
+	 */
+	if (!m || !m->pixclock || !m->refresh) {
+		dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
+		return;
+	}
+
+	/*
+	 * Using PLL/AXI clock.
+	 */
+	x = 0x80000000;
+
+	/*
+	 * Calc divider according to refresh rate.
+	 */
+	div_result = 1000000000000ll;
+	do_div(div_result, m->pixclock);
+	needed_pixclk = (u32)div_result;
+
+	divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
+
+	/* check whether divisor is too small. */
+	if (divider_int < 2) {
+		dev_warn(fbi->dev, "Warning: clock source is too slow."
+				"Try smaller resolution\n");
+		divider_int = 2;
+	}
+
+	/*
+	 * Set setting to reg.
+	 */
+	x |= divider_int;
+	writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
+}
+
+static void set_dma_control0(struct pxa168fb_info *fbi)
+{
+	u32 x;
+
+	/*
+	 * Set bit to enable graphics DMA.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+	x |= fbi->active ? 0x00000100 : 0;
+	fbi->active = 0;
+
+	/*
+	 * If we are in a pseudo-color mode, we need to enable
+	 * palette lookup.
+	 */
+	if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+		x |= 0x10000000;
+
+	/*
+	 * Configure hardware pixel format.
+	 */
+	x &= ~(0xF << 16);
+	x |= (fbi->pix_fmt >> 1) << 16;
+
+	/*
+	 * Check red and blue pixel swap.
+	 * 1. source data swap
+	 * 2. panel output data swap
+	 */
+	x &= ~(1 << 12);
+	x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
+
+	writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+}
+
+static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
+{
+	u32 x;
+
+	/*
+	 * Configure default bits: vsync triggers DMA, gated clock
+	 * enable, power save enable, configure alpha registers to
+	 * display 100% graphics, and set pixel command.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
+	x |= 0x2032ff81;
+
+	/*
+	 * We trigger DMA on the falling edge of vsync if vsync is
+	 * active low, or on the rising edge if vsync is active high.
+	 */
+	if (!(sync & FB_SYNC_VERT_HIGH_ACT))
+		x |= 0x08000000;
+
+	writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
+}
+
+static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int pixel_offset;
+	unsigned long addr;
+
+	pixel_offset = (yoffset * var->xres_virtual) + xoffset;
+
+	addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
+	writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
+}
+
+static void set_dumb_panel_control(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct pxa168fb_mach_info *mi = fbi->dev->platform_data;
+	u32 x;
+
+	/*
+	 * Preserve enable flag.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
+
+	x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
+	x |= mi->gpio_output_data << 20;
+	x |= mi->gpio_output_mask << 12;
+	x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
+	x |= mi->invert_composite_blank ? 0x00000040 : 0;
+	x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
+	x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
+	x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
+	x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
+	x |= mi->invert_pixclock ? 0x00000002 : 0;
+
+	writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+}
+
+static void set_dumb_screen_dimensions(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *v = &info->var;
+	int x;
+	int y;
+
+	x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
+	y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
+
+	writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
+}
+
+static int pxa168fb_set_par(struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	struct fb_videomode mode;
+	u32 x;
+	struct pxa168fb_mach_info *mi;
+
+	mi = fbi->dev->platform_data;
+
+	/*
+	 * Set additional mode info.
+	 */
+	if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+	info->fix.ypanstep = var->yres;
+
+	/*
+	 * Disable panel output while we setup the display.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+	writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+	/*
+	 * Configure global panel parameters.
+	 */
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_V_H_ACTIVE);
+
+	/*
+	 * convet var to video mode
+	 */
+	fb_var_to_videomode(&mode, &info->var);
+
+	/* Calculate clock divisor. */
+	set_clock_divider(fbi, &mode);
+
+	/* Configure dma ctrl regs. */
+	set_dma_control0(fbi);
+	set_dma_control1(fbi, info->var.sync);
+
+	/*
+	 * Configure graphics DMA parameters.
+	 */
+	x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
+	x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
+	writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
+	writel((var->yres << 16) | var->xres,
+		fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
+
+	/*
+	 * Configure dumb panel ctrl regs & timings.
+	 */
+	set_dumb_panel_control(info);
+	set_dumb_screen_dimensions(info);
+
+	writel((var->left_margin << 16) | var->right_margin,
+			fbi->reg_base + LCD_SPU_H_PORCH);
+	writel((var->upper_margin << 16) | var->lower_margin,
+			fbi->reg_base + LCD_SPU_V_PORCH);
+
+	/*
+	 * Re-enable panel output.
+	 */
+	x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+	writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+	return 0;
+}
+
+static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+	return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
+}
+
+static u32 to_rgb(u16 red, u16 green, u16 blue)
+{
+	red >>= 8;
+	green >>= 8;
+	blue >>= 8;
+
+	return (red << 16) | (green << 8) | blue;
+}
+
+static int
+pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+		 unsigned int blue, unsigned int trans, struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+	u32 val;
+
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green +
+					7471 * blue) >> 16;
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
+		val =  chan_to_field(red,   &info->var.red);
+		val |= chan_to_field(green, &info->var.green);
+		val |= chan_to_field(blue , &info->var.blue);
+		fbi->pseudo_palette[regno] = val;
+	}
+
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+		val = to_rgb(red, green, blue);
+		writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
+		writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
+	}
+
+	return 0;
+}
+
+static int pxa168fb_blank(int blank, struct fb_info *info)
+{
+	struct pxa168fb_info *fbi = info->par;
+
+	fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
+	set_dumb_panel_control(info);
+
+	return 0;
+}
+
+static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	set_graphics_start(info, var->xoffset, var->yoffset);
+
+	return 0;
+}
+
+static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
+{
+	struct pxa168fb_info *fbi = dev_id;
+	u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
+
+	if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
+
+		writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
+			fbi->reg_base + SPU_IRQ_ISR);
+
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static struct fb_ops pxa168fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= pxa168fb_check_var,
+	.fb_set_par	= pxa168fb_set_par,
+	.fb_setcolreg	= pxa168fb_setcolreg,
+	.fb_blank	= pxa168fb_blank,
+	.fb_pan_display	= pxa168fb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int __init pxa168fb_init_mode(struct fb_info *info,
+			      struct pxa168fb_mach_info *mi)
+{
+	struct pxa168fb_info *fbi = info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int ret = 0;
+	u32 total_w, total_h, refresh;
+	u64 div_result;
+	const struct fb_videomode *m;
+
+	/*
+	 * Set default value
+	 */
+	refresh = DEFAULT_REFRESH;
+
+	/* try to find best video mode. */
+	m = fb_find_best_mode(&info->var, &info->modelist);
+	if (m)
+		fb_videomode_to_var(&info->var, m);
+
+	/* Init settings. */
+	var->xres_virtual = var->xres;
+	var->yres_virtual = info->fix.smem_len /
+		(var->xres_virtual * (var->bits_per_pixel >> 3));
+	dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
+				var->xres, var->yres);
+
+	/* correct pixclock. */
+	total_w = var->xres + var->left_margin + var->right_margin +
+		  var->hsync_len;
+	total_h = var->yres + var->upper_margin + var->lower_margin +
+		  var->vsync_len;
+
+	div_result = 1000000000000ll;
+	do_div(div_result, total_w * total_h * refresh);
+	var->pixclock = (u32)div_result;
+
+	return ret;
+}
+
+static int __init pxa168fb_probe(struct platform_device *pdev)
+{
+	struct pxa168fb_mach_info *mi;
+	struct fb_info *info = 0;
+	struct pxa168fb_info *fbi = 0;
+	struct resource *res;
+	struct clk *clk;
+	int irq, ret;
+
+	mi = pdev->dev.platform_data;
+	if (mi == NULL) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	clk = clk_get(&pdev->dev, "LCDCLK");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "unable to get LCDCLK");
+		return PTR_ERR(clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no IO memory defined\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no IRQ defined\n");
+		return -ENOENT;
+	}
+
+	info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
+	if (info == NULL) {
+		clk_put(clk);
+		return -ENOMEM;
+	}
+
+	/* Initialize private data */
+	fbi = info->par;
+	fbi->info = info;
+	fbi->clk = clk;
+	fbi->dev = info->dev = &pdev->dev;
+	fbi->panel_rbswap = mi->panel_rbswap;
+	fbi->is_blanked = 0;
+	fbi->active = mi->active;
+
+	/*
+	 * Initialise static fb parameters.
+	 */
+	info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
+		      FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
+	info->node = -1;
+	strlcpy(info->fix.id, mi->id, 16);
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.type_aux = 0;
+	info->fix.xpanstep = 0;
+	info->fix.ypanstep = 0;
+	info->fix.ywrapstep = 0;
+	info->fix.mmio_start = res->start;
+	info->fix.mmio_len = res->end - res->start + 1;
+	info->fix.accel = FB_ACCEL_NONE;
+	info->fbops = &pxa168fb_ops;
+	info->pseudo_palette = fbi->pseudo_palette;
+
+	/*
+	 * Map LCD controller registers.
+	 */
+	fbi->reg_base = ioremap_nocache(res->start, res->end - res->start);
+	if (fbi->reg_base == NULL) {
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	/*
+	 * Allocate framebuffer memory.
+	 */
+	info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
+
+	info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len,
+						&fbi->fb_start_dma, GFP_KERNEL);
+	if (info->screen_base == NULL) {
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+
+	/*
+	 * Set video mode according to platform data.
+	 */
+	set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
+
+	fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
+
+	/*
+	 * init video mode data.
+	 */
+	pxa168fb_init_mode(info, mi);
+
+	ret = pxa168fb_check_var(&info->var, info);
+	if (ret)
+		goto failed_free_fbmem;
+
+	/*
+	 * Fill in sane defaults.
+	 */
+	ret = pxa168fb_check_var(&info->var, info);
+	if (ret)
+		goto failed;
+
+	/*
+	 * enable controller clock
+	 */
+	clk_enable(fbi->clk);
+
+	pxa168fb_set_par(info);
+
+	/*
+	 * Configure default register values.
+	 */
+	writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
+	writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
+	writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
+	writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
+	writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
+	writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
+		fbi->reg_base + LCD_SPU_SRAM_PARA1);
+
+	/*
+	 * Allocate color map.
+	 */
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+		ret = -ENOMEM;
+		goto failed_free_clk;
+	}
+
+	/*
+	 * Register irq handler.
+	 */
+	ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED,
+					info->fix.id, fbi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to request IRQ\n");
+		ret = -ENXIO;
+		goto failed_free_cmap;
+	}
+
+	/*
+	 * Enable GFX interrupt
+	 */
+	writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
+
+	/*
+	 * Register framebuffer.
+	 */
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
+		ret = -ENXIO;
+		goto failed_free_irq;
+	}
+
+	platform_set_drvdata(pdev, fbi);
+	return 0;
+
+failed_free_irq:
+	free_irq(irq, fbi);
+failed_free_cmap:
+	fb_dealloc_cmap(&info->cmap);
+failed_free_clk:
+	clk_disable(fbi->clk);
+failed_free_fbmem:
+	dma_free_coherent(fbi->dev, info->fix.smem_len,
+			info->screen_base, fbi->fb_start_dma);
+failed:
+	kfree(info);
+	clk_put(clk);
+
+	dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
+	return ret;
+}
+
+static struct platform_driver pxa168fb_driver = {
+	.driver		= {
+		.name	= "pxa168-fb",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pxa168fb_probe,
+};
+
+static int __devinit pxa168fb_init(void)
+{
+	return platform_driver_register(&pxa168fb_driver);
+}
+module_init(pxa168fb_init);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
+	      "Green Wan <gwan@marvell.com>");
+MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/pxa168fb.h b/drivers/video/pxa168fb.h
new file mode 100644
index 00000000000..eee09279c52
--- /dev/null
+++ b/drivers/video/pxa168fb.h
@@ -0,0 +1,558 @@
+#ifndef __PXA168FB_H__
+#define __PXA168FB_H__
+
+/* ------------< LCD register >------------ */
+/* Video Frame 0&1 start address registers */
+#define	LCD_SPU_DMA_START_ADDR_Y0		0x00C0
+#define	LCD_SPU_DMA_START_ADDR_U0		0x00C4
+#define	LCD_SPU_DMA_START_ADDR_V0		0x00C8
+#define LCD_CFG_DMA_START_ADDR_0		0x00CC /* Cmd address */
+#define	LCD_SPU_DMA_START_ADDR_Y1		0x00D0
+#define	LCD_SPU_DMA_START_ADDR_U1		0x00D4
+#define	LCD_SPU_DMA_START_ADDR_V1		0x00D8
+#define LCD_CFG_DMA_START_ADDR_1		0x00DC /* Cmd address */
+
+/* YC & UV Pitch */
+#define LCD_SPU_DMA_PITCH_YC			0x00E0
+#define     SPU_DMA_PITCH_C(c)			((c) << 16)
+#define     SPU_DMA_PITCH_Y(y)			(y)
+#define LCD_SPU_DMA_PITCH_UV			0x00E4
+#define     SPU_DMA_PITCH_V(v)			((v) << 16)
+#define     SPU_DMA_PITCH_U(u)			(u)
+
+/* Video Starting Point on Screen Register */
+#define LCD_SPUT_DMA_OVSA_HPXL_VLN		0x00E8
+#define     CFG_DMA_OVSA_VLN(y)			((y) << 16) /* 0~0xfff */
+#define     CFG_DMA_OVSA_HPXL(x)		(x)     /* 0~0xfff */
+
+/* Video Size Register */
+#define LCD_SPU_DMA_HPXL_VLN			0x00EC
+#define     CFG_DMA_VLN(y)			((y) << 16)
+#define     CFG_DMA_HPXL(x)			(x)
+
+/* Video Size After zooming Register */
+#define LCD_SPU_DZM_HPXL_VLN			0x00F0
+#define     CFG_DZM_VLN(y)			((y) << 16)
+#define     CFG_DZM_HPXL(x)			(x)
+
+/* Graphic Frame 0&1 Starting Address Register */
+#define LCD_CFG_GRA_START_ADDR0			0x00F4
+#define LCD_CFG_GRA_START_ADDR1			0x00F8
+
+/* Graphic Frame Pitch */
+#define LCD_CFG_GRA_PITCH			0x00FC
+
+/* Graphic Starting Point on Screen Register */
+#define LCD_SPU_GRA_OVSA_HPXL_VLN		0x0100
+#define     CFG_GRA_OVSA_VLN(y)			((y) << 16)
+#define     CFG_GRA_OVSA_HPXL(x)		(x)
+
+/* Graphic Size Register */
+#define LCD_SPU_GRA_HPXL_VLN			0x0104
+#define     CFG_GRA_VLN(y)			((y) << 16)
+#define     CFG_GRA_HPXL(x)			(x)
+
+/* Graphic Size after Zooming Register */
+#define LCD_SPU_GZM_HPXL_VLN			0x0108
+#define     CFG_GZM_VLN(y)			((y) << 16)
+#define     CFG_GZM_HPXL(x)			(x)
+
+/* HW Cursor Starting Point on Screen Register */
+#define LCD_SPU_HWC_OVSA_HPXL_VLN		0x010C
+#define     CFG_HWC_OVSA_VLN(y)			((y) << 16)
+#define     CFG_HWC_OVSA_HPXL(x)		(x)
+
+/* HW Cursor Size */
+#define LCD_SPU_HWC_HPXL_VLN			0x0110
+#define     CFG_HWC_VLN(y)			((y) << 16)
+#define     CFG_HWC_HPXL(x)			(x)
+
+/* Total Screen Size Register */
+#define LCD_SPUT_V_H_TOTAL			0x0114
+#define     CFG_V_TOTAL(y)			((y) << 16)
+#define     CFG_H_TOTAL(x)			(x)
+
+/* Total Screen Active Size Register */
+#define LCD_SPU_V_H_ACTIVE			0x0118
+#define     CFG_V_ACTIVE(y)			((y) << 16)
+#define     CFG_H_ACTIVE(x)			(x)
+
+/* Screen H&V Porch Register */
+#define LCD_SPU_H_PORCH				0x011C
+#define     CFG_H_BACK_PORCH(b)			((b) << 16)
+#define     CFG_H_FRONT_PORCH(f)		(f)
+#define LCD_SPU_V_PORCH				0x0120
+#define     CFG_V_BACK_PORCH(b)			((b) << 16)
+#define     CFG_V_FRONT_PORCH(f)		(f)
+
+/* Screen Blank Color Register */
+#define LCD_SPU_BLANKCOLOR			0x0124
+#define     CFG_BLANKCOLOR_MASK			0x00FFFFFF
+#define     CFG_BLANKCOLOR_R_MASK		0x000000FF
+#define     CFG_BLANKCOLOR_G_MASK		0x0000FF00
+#define     CFG_BLANKCOLOR_B_MASK		0x00FF0000
+
+/* HW Cursor Color 1&2 Register */
+#define LCD_SPU_ALPHA_COLOR1			0x0128
+#define     CFG_HWC_COLOR1			0x00FFFFFF
+#define     CFG_HWC_COLOR1_R(red)		((red) << 16)
+#define     CFG_HWC_COLOR1_G(green)		((green) << 8)
+#define     CFG_HWC_COLOR1_B(blue)		(blue)
+#define     CFG_HWC_COLOR1_R_MASK		0x000000FF
+#define     CFG_HWC_COLOR1_G_MASK		0x0000FF00
+#define     CFG_HWC_COLOR1_B_MASK		0x00FF0000
+#define LCD_SPU_ALPHA_COLOR2			0x012C
+#define     CFG_HWC_COLOR2			0x00FFFFFF
+#define     CFG_HWC_COLOR2_R_MASK		0x000000FF
+#define     CFG_HWC_COLOR2_G_MASK		0x0000FF00
+#define     CFG_HWC_COLOR2_B_MASK		0x00FF0000
+
+/* Video YUV Color Key Control */
+#define LCD_SPU_COLORKEY_Y			0x0130
+#define     CFG_CKEY_Y2(y2)			((y2) << 24)
+#define     CFG_CKEY_Y2_MASK			0xFF000000
+#define     CFG_CKEY_Y1(y1)			((y1) << 16)
+#define     CFG_CKEY_Y1_MASK			0x00FF0000
+#define     CFG_CKEY_Y(y)			((y) << 8)
+#define     CFG_CKEY_Y_MASK			0x0000FF00
+#define     CFG_ALPHA_Y(y)			(y)
+#define     CFG_ALPHA_Y_MASK			0x000000FF
+#define LCD_SPU_COLORKEY_U			0x0134
+#define     CFG_CKEY_U2(u2)			((u2) << 24)
+#define     CFG_CKEY_U2_MASK			0xFF000000
+#define     CFG_CKEY_U1(u1)			((u1) << 16)
+#define     CFG_CKEY_U1_MASK			0x00FF0000
+#define     CFG_CKEY_U(u)			((u) << 8)
+#define     CFG_CKEY_U_MASK			0x0000FF00
+#define     CFG_ALPHA_U(u)			(u)
+#define     CFG_ALPHA_U_MASK			0x000000FF
+#define LCD_SPU_COLORKEY_V			0x0138
+#define     CFG_CKEY_V2(v2)			((v2) << 24)
+#define     CFG_CKEY_V2_MASK			0xFF000000
+#define     CFG_CKEY_V1(v1)			((v1) << 16)
+#define     CFG_CKEY_V1_MASK			0x00FF0000
+#define     CFG_CKEY_V(v)			((v) << 8)
+#define     CFG_CKEY_V_MASK			0x0000FF00
+#define     CFG_ALPHA_V(v)			(v)
+#define     CFG_ALPHA_V_MASK			0x000000FF
+
+/* SPI Read Data Register */
+#define LCD_SPU_SPI_RXDATA			0x0140
+
+/* Smart Panel Read Data Register */
+#define LCD_SPU_ISA_RSDATA			0x0144
+#define     ISA_RXDATA_16BIT_1_DATA_MASK	0x000000FF
+#define     ISA_RXDATA_16BIT_2_DATA_MASK	0x0000FF00
+#define     ISA_RXDATA_16BIT_3_DATA_MASK	0x00FF0000
+#define     ISA_RXDATA_16BIT_4_DATA_MASK	0xFF000000
+#define     ISA_RXDATA_32BIT_1_DATA_MASK	0x00FFFFFF
+
+/* HWC SRAM Read Data Register */
+#define LCD_SPU_HWC_RDDAT			0x0158
+
+/* Gamma Table SRAM Read Data Register */
+#define LCD_SPU_GAMMA_RDDAT			0x015c
+#define     CFG_GAMMA_RDDAT_MASK		0x000000FF
+
+/* Palette Table SRAM Read Data Register */
+#define LCD_SPU_PALETTE_RDDAT			0x0160
+#define     CFG_PALETTE_RDDAT_MASK		0x00FFFFFF
+
+/* I/O Pads Input Read Only Register */
+#define LCD_SPU_IOPAD_IN			0x0178
+#define     CFG_IOPAD_IN_MASK			0x0FFFFFFF
+
+/* Reserved Read Only Registers */
+#define LCD_CFG_RDREG5F				0x017C
+#define     IRE_FRAME_CNT_MASK			0x000000C0
+#define     IPE_FRAME_CNT_MASK			0x00000030
+#define     GRA_FRAME_CNT_MASK			0x0000000C  /* Graphic */
+#define     DMA_FRAME_CNT_MASK			0x00000003  /* Video */
+
+/* SPI Control Register. */
+#define LCD_SPU_SPI_CTRL			0x0180
+#define     CFG_SCLKCNT(div)			((div) << 24)  /* 0xFF~0x2 */
+#define     CFG_SCLKCNT_MASK			0xFF000000
+#define     CFG_RXBITS(rx)			((rx) << 16)   /* 0x1F~0x1 */
+#define     CFG_RXBITS_MASK			0x00FF0000
+#define     CFG_TXBITS(tx)			((tx) << 8)    /* 0x1F~0x1 */
+#define     CFG_TXBITS_MASK			0x0000FF00
+#define     CFG_CLKINV(clk)			((clk) << 7)
+#define     CFG_CLKINV_MASK			0x00000080
+#define     CFG_KEEPXFER(transfer)		((transfer) << 6)
+#define     CFG_KEEPXFER_MASK			0x00000040
+#define     CFG_RXBITSTO0(rx)			((rx) << 5)
+#define     CFG_RXBITSTO0_MASK			0x00000020
+#define     CFG_TXBITSTO0(tx)			((tx) << 4)
+#define     CFG_TXBITSTO0_MASK			0x00000010
+#define     CFG_SPI_ENA(spi)			((spi) << 3)
+#define     CFG_SPI_ENA_MASK			0x00000008
+#define     CFG_SPI_SEL(spi)			((spi) << 2)
+#define     CFG_SPI_SEL_MASK			0x00000004
+#define     CFG_SPI_3W4WB(wire)			((wire) << 1)
+#define     CFG_SPI_3W4WB_MASK			0x00000002
+#define     CFG_SPI_START(start)		(start)
+#define     CFG_SPI_START_MASK			0x00000001
+
+/* SPI Tx Data Register */
+#define LCD_SPU_SPI_TXDATA			0x0184
+
+/*
+   1. Smart Pannel 8-bit Bus Control Register.
+   2. AHB Slave Path Data Port Register
+*/
+#define LCD_SPU_SMPN_CTRL			0x0188
+
+/* DMA Control 0 Register */
+#define LCD_SPU_DMA_CTRL0			0x0190
+#define     CFG_NOBLENDING(nb)			((nb) << 31)
+#define     CFG_NOBLENDING_MASK			0x80000000
+#define     CFG_GAMMA_ENA(gn)			((gn) << 30)
+#define     CFG_GAMMA_ENA_MASK			0x40000000
+#define     CFG_CBSH_ENA(cn)			((cn) << 29)
+#define     CFG_CBSH_ENA_MASK			0x20000000
+#define     CFG_PALETTE_ENA(pn)			((pn) << 28)
+#define     CFG_PALETTE_ENA_MASK		0x10000000
+#define     CFG_ARBFAST_ENA(an)			((an) << 27)
+#define     CFG_ARBFAST_ENA_MASK		0x08000000
+#define     CFG_HWC_1BITMOD(mode)		((mode) << 26)
+#define     CFG_HWC_1BITMOD_MASK		0x04000000
+#define     CFG_HWC_1BITENA(mn)			((mn) << 25)
+#define     CFG_HWC_1BITENA_MASK		0x02000000
+#define     CFG_HWC_ENA(cn)		        ((cn) << 24)
+#define     CFG_HWC_ENA_MASK			0x01000000
+#define     CFG_DMAFORMAT(dmaformat)		((dmaformat) << 20)
+#define     CFG_DMAFORMAT_MASK			0x00F00000
+#define     CFG_GRAFORMAT(graformat)		((graformat) << 16)
+#define     CFG_GRAFORMAT_MASK			0x000F0000
+/* for graphic part */
+#define     CFG_GRA_FTOGGLE(toggle)		((toggle) << 15)
+#define     CFG_GRA_FTOGGLE_MASK		0x00008000
+#define     CFG_GRA_HSMOOTH(smooth)		((smooth) << 14)
+#define     CFG_GRA_HSMOOTH_MASK		0x00004000
+#define     CFG_GRA_TSTMODE(test)		((test) << 13)
+#define     CFG_GRA_TSTMODE_MASK		0x00002000
+#define     CFG_GRA_SWAPRB(swap)		((swap) << 12)
+#define     CFG_GRA_SWAPRB_MASK			0x00001000
+#define     CFG_GRA_SWAPUV(swap)		((swap) << 11)
+#define     CFG_GRA_SWAPUV_MASK			0x00000800
+#define     CFG_GRA_SWAPYU(swap)		((swap) << 10)
+#define     CFG_GRA_SWAPYU_MASK			0x00000400
+#define     CFG_YUV2RGB_GRA(cvrt)		((cvrt) << 9)
+#define     CFG_YUV2RGB_GRA_MASK		0x00000200
+#define     CFG_GRA_ENA(gra)			((gra) << 8)
+#define     CFG_GRA_ENA_MASK			0x00000100
+/* for video part */
+#define     CFG_DMA_FTOGGLE(toggle)		((toggle) << 7)
+#define     CFG_DMA_FTOGGLE_MASK		0x00000080
+#define     CFG_DMA_HSMOOTH(smooth)		((smooth) << 6)
+#define     CFG_DMA_HSMOOTH_MASK		0x00000040
+#define     CFG_DMA_TSTMODE(test)		((test) << 5)
+#define     CFG_DMA_TSTMODE_MASK		0x00000020
+#define     CFG_DMA_SWAPRB(swap)		((swap) << 4)
+#define     CFG_DMA_SWAPRB_MASK			0x00000010
+#define     CFG_DMA_SWAPUV(swap)		((swap) << 3)
+#define     CFG_DMA_SWAPUV_MASK			0x00000008
+#define     CFG_DMA_SWAPYU(swap)		((swap) << 2)
+#define     CFG_DMA_SWAPYU_MASK			0x00000004
+#define     CFG_DMA_SWAP_MASK			0x0000001C
+#define     CFG_YUV2RGB_DMA(cvrt)		((cvrt) << 1)
+#define     CFG_YUV2RGB_DMA_MASK		0x00000002
+#define     CFG_DMA_ENA(video)			(video)
+#define     CFG_DMA_ENA_MASK			0x00000001
+
+/* DMA Control 1 Register */
+#define LCD_SPU_DMA_CTRL1			0x0194
+#define     CFG_FRAME_TRIG(trig)		((trig) << 31)
+#define     CFG_FRAME_TRIG_MASK			0x80000000
+#define     CFG_VSYNC_TRIG(trig)		((trig) << 28)
+#define     CFG_VSYNC_TRIG_MASK			0x70000000
+#define     CFG_VSYNC_INV(inv)			((inv) << 27)
+#define     CFG_VSYNC_INV_MASK			0x08000000
+#define     CFG_COLOR_KEY_MODE(cmode)		((cmode) << 24)
+#define     CFG_COLOR_KEY_MASK			0x07000000
+#define     CFG_CARRY(carry)			((carry) << 23)
+#define     CFG_CARRY_MASK			0x00800000
+#define     CFG_LNBUF_ENA(lnbuf)		((lnbuf) << 22)
+#define     CFG_LNBUF_ENA_MASK			0x00400000
+#define     CFG_GATED_ENA(gated)		((gated) << 21)
+#define     CFG_GATED_ENA_MASK			0x00200000
+#define     CFG_PWRDN_ENA(power)		((power) << 20)
+#define     CFG_PWRDN_ENA_MASK			0x00100000
+#define     CFG_DSCALE(dscale)			((dscale) << 18)
+#define     CFG_DSCALE_MASK			0x000C0000
+#define     CFG_ALPHA_MODE(amode)		((amode) << 16)
+#define     CFG_ALPHA_MODE_MASK			0x00030000
+#define     CFG_ALPHA(alpha)			((alpha) << 8)
+#define     CFG_ALPHA_MASK			0x0000FF00
+#define     CFG_PXLCMD(pxlcmd)			(pxlcmd)
+#define     CFG_PXLCMD_MASK			0x000000FF
+
+/* SRAM Control Register */
+#define LCD_SPU_SRAM_CTRL			0x0198
+#define     CFG_SRAM_INIT_WR_RD(mode)		((mode) << 14)
+#define     CFG_SRAM_INIT_WR_RD_MASK		0x0000C000
+#define     CFG_SRAM_ADDR_LCDID(id)		((id) << 8)
+#define     CFG_SRAM_ADDR_LCDID_MASK		0x00000F00
+#define     CFG_SRAM_ADDR(addr)			(addr)
+#define     CFG_SRAM_ADDR_MASK			0x000000FF
+
+/* SRAM Write Data Register */
+#define LCD_SPU_SRAM_WRDAT			0x019C
+
+/* SRAM RTC/WTC Control Register */
+#define LCD_SPU_SRAM_PARA0			0x01A0
+
+/* SRAM Power Down Control Register */
+#define LCD_SPU_SRAM_PARA1			0x01A4
+#define     CFG_CSB_256x32(hwc)			((hwc) << 15)	/* HWC */
+#define     CFG_CSB_256x32_MASK			0x00008000
+#define     CFG_CSB_256x24(palette)		((palette) << 14)	/* Palette */
+#define     CFG_CSB_256x24_MASK			0x00004000
+#define     CFG_CSB_256x8(gamma)		((gamma) << 13)	/* Gamma */
+#define     CFG_CSB_256x8_MASK			0x00002000
+#define     CFG_PDWN256x32(pdwn)		((pdwn) << 7)	/* HWC */
+#define     CFG_PDWN256x32_MASK			0x00000080
+#define     CFG_PDWN256x24(pdwn)		((pdwn) << 6)	/* Palette */
+#define     CFG_PDWN256x24_MASK			0x00000040
+#define     CFG_PDWN256x8(pdwn)			((pdwn) << 5)	/* Gamma */
+#define     CFG_PDWN256x8_MASK			0x00000020
+#define     CFG_PDWN32x32(pdwn)			((pdwn) << 3)
+#define     CFG_PDWN32x32_MASK			0x00000008
+#define     CFG_PDWN16x66(pdwn)			((pdwn) << 2)
+#define     CFG_PDWN16x66_MASK			0x00000004
+#define     CFG_PDWN32x66(pdwn)			((pdwn) << 1)
+#define     CFG_PDWN32x66_MASK			0x00000002
+#define     CFG_PDWN64x66(pdwn)			(pdwn)
+#define     CFG_PDWN64x66_MASK			0x00000001
+
+/* Smart or Dumb Panel Clock Divider */
+#define LCD_CFG_SCLK_DIV			0x01A8
+#define     SCLK_SOURCE_SELECT(src)		((src) << 31)
+#define     SCLK_SOURCE_SELECT_MASK		0x80000000
+#define     CLK_FRACDIV(frac)			((frac) << 16)
+#define     CLK_FRACDIV_MASK			0x0FFF0000
+#define     CLK_INT_DIV(div)			(div)
+#define     CLK_INT_DIV_MASK			0x0000FFFF
+
+/* Video Contrast Register */
+#define LCD_SPU_CONTRAST			0x01AC
+#define     CFG_BRIGHTNESS(bright)		((bright) << 16)
+#define     CFG_BRIGHTNESS_MASK			0xFFFF0000
+#define     CFG_CONTRAST(contrast)		(contrast)
+#define     CFG_CONTRAST_MASK			0x0000FFFF
+
+/* Video Saturation Register */
+#define LCD_SPU_SATURATION			0x01B0
+#define     CFG_C_MULTS(mult)			((mult) << 16)
+#define     CFG_C_MULTS_MASK			0xFFFF0000
+#define     CFG_SATURATION(sat)			(sat)
+#define     CFG_SATURATION_MASK			0x0000FFFF
+
+/* Video Hue Adjust Register */
+#define LCD_SPU_CBSH_HUE			0x01B4
+#define     CFG_SIN0(sin0)			((sin0) << 16)
+#define     CFG_SIN0_MASK			0xFFFF0000
+#define     CFG_COS0(con0)			(con0)
+#define     CFG_COS0_MASK			0x0000FFFF
+
+/* Dump LCD Panel Control Register */
+#define LCD_SPU_DUMB_CTRL			0x01B8
+#define     CFG_DUMBMODE(mode)			((mode) << 28)
+#define     CFG_DUMBMODE_MASK			0xF0000000
+#define     CFG_LCDGPIO_O(data)			((data) << 20)
+#define     CFG_LCDGPIO_O_MASK			0x0FF00000
+#define     CFG_LCDGPIO_ENA(gpio)		((gpio) << 12)
+#define     CFG_LCDGPIO_ENA_MASK		0x000FF000
+#define     CFG_BIAS_OUT(bias)			((bias) << 8)
+#define     CFG_BIAS_OUT_MASK			0x00000100
+#define     CFG_REVERSE_RGB(rRGB)		((rRGB) << 7)
+#define     CFG_REVERSE_RGB_MASK		0x00000080
+#define     CFG_INV_COMPBLANK(blank)		((blank) << 6)
+#define     CFG_INV_COMPBLANK_MASK		0x00000040
+#define     CFG_INV_COMPSYNC(sync)		((sync) << 5)
+#define     CFG_INV_COMPSYNC_MASK		0x00000020
+#define     CFG_INV_HENA(hena)			((hena) << 4)
+#define     CFG_INV_HENA_MASK			0x00000010
+#define     CFG_INV_VSYNC(vsync)		((vsync) << 3)
+#define     CFG_INV_VSYNC_MASK			0x00000008
+#define     CFG_INV_HSYNC(hsync)		((hsync) << 2)
+#define     CFG_INV_HSYNC_MASK			0x00000004
+#define     CFG_INV_PCLK(pclk)			((pclk) << 1)
+#define     CFG_INV_PCLK_MASK			0x00000002
+#define     CFG_DUMB_ENA(dumb)			(dumb)
+#define     CFG_DUMB_ENA_MASK			0x00000001
+
+/* LCD I/O Pads Control Register */
+#define SPU_IOPAD_CONTROL			0x01BC
+#define     CFG_GRA_VM_ENA(vm)			((vm) << 15)        /* gfx */
+#define     CFG_GRA_VM_ENA_MASK			0x00008000
+#define     CFG_DMA_VM_ENA(vm)			((vm) << 13)	/* video */
+#define     CFG_DMA_VM_ENA_MASK			0x00002000
+#define     CFG_CMD_VM_ENA(vm)			((vm) << 13)
+#define     CFG_CMD_VM_ENA_MASK			0x00000800
+#define     CFG_CSC(csc)			((csc) << 8)	/* csc */
+#define     CFG_CSC_MASK			0x00000300
+#define     CFG_AXICTRL(axi)			((axi) << 4)
+#define     CFG_AXICTRL_MASK			0x000000F0
+#define     CFG_IOPADMODE(iopad)		(iopad)
+#define     CFG_IOPADMODE_MASK			0x0000000F
+
+/* LCD Interrupt Control Register */
+#define SPU_IRQ_ENA				0x01C0
+#define     DMA_FRAME_IRQ0_ENA(irq)		((irq) << 31)
+#define     DMA_FRAME_IRQ0_ENA_MASK		0x80000000
+#define     DMA_FRAME_IRQ1_ENA(irq)		((irq) << 30)
+#define     DMA_FRAME_IRQ1_ENA_MASK		0x40000000
+#define     DMA_FF_UNDERFLOW_ENA(ff)		((ff) << 29)
+#define     DMA_FF_UNDERFLOW_ENA_MASK		0x20000000
+#define     GRA_FRAME_IRQ0_ENA(irq)		((irq) << 27)
+#define     GRA_FRAME_IRQ0_ENA_MASK		0x08000000
+#define     GRA_FRAME_IRQ1_ENA(irq)		((irq) << 26)
+#define     GRA_FRAME_IRQ1_ENA_MASK		0x04000000
+#define     GRA_FF_UNDERFLOW_ENA(ff)		((ff) << 25)
+#define     GRA_FF_UNDERFLOW_ENA_MASK		0x02000000
+#define     VSYNC_IRQ_ENA(vsync_irq)		((vsync_irq) << 23)
+#define     VSYNC_IRQ_ENA_MASK			0x00800000
+#define     DUMB_FRAMEDONE_ENA(fdone)		((fdone) << 22)
+#define     DUMB_FRAMEDONE_ENA_MASK		0x00400000
+#define     TWC_FRAMEDONE_ENA(fdone)		((fdone) << 21)
+#define     TWC_FRAMEDONE_ENA_MASK		0x00200000
+#define     HWC_FRAMEDONE_ENA(fdone)		((fdone) << 20)
+#define     HWC_FRAMEDONE_ENA_MASK		0x00100000
+#define     SLV_IRQ_ENA(irq)			((irq) << 19)
+#define     SLV_IRQ_ENA_MASK			0x00080000
+#define     SPI_IRQ_ENA(irq)			((irq) << 18)
+#define     SPI_IRQ_ENA_MASK			0x00040000
+#define     PWRDN_IRQ_ENA(irq)			((irq) << 17)
+#define     PWRDN_IRQ_ENA_MASK			0x00020000
+#define     ERR_IRQ_ENA(irq)			((irq) << 16)
+#define     ERR_IRQ_ENA_MASK			0x00010000
+#define     CLEAN_SPU_IRQ_ISR(irq)		(irq)
+#define     CLEAN_SPU_IRQ_ISR_MASK		0x0000FFFF
+
+/* LCD Interrupt Status Register */
+#define SPU_IRQ_ISR				0x01C4
+#define     DMA_FRAME_IRQ0(irq)			((irq) << 31)
+#define     DMA_FRAME_IRQ0_MASK			0x80000000
+#define     DMA_FRAME_IRQ1(irq)			((irq) << 30)
+#define     DMA_FRAME_IRQ1_MASK			0x40000000
+#define     DMA_FF_UNDERFLOW(ff)		((ff) << 29)
+#define     DMA_FF_UNDERFLOW_MASK		0x20000000
+#define     GRA_FRAME_IRQ0(irq)			((irq) << 27)
+#define     GRA_FRAME_IRQ0_MASK			0x08000000
+#define     GRA_FRAME_IRQ1(irq)			((irq) << 26)
+#define     GRA_FRAME_IRQ1_MASK			0x04000000
+#define     GRA_FF_UNDERFLOW(ff)		((ff) << 25)
+#define     GRA_FF_UNDERFLOW_MASK		0x02000000
+#define     VSYNC_IRQ(vsync_irq)		((vsync_irq) << 23)
+#define     VSYNC_IRQ_MASK			0x00800000
+#define     DUMB_FRAMEDONE(fdone)		((fdone) << 22)
+#define     DUMB_FRAMEDONE_MASK			0x00400000
+#define     TWC_FRAMEDONE(fdone)		((fdone) << 21)
+#define     TWC_FRAMEDONE_MASK			0x00200000
+#define     HWC_FRAMEDONE(fdone)		((fdone) << 20)
+#define     HWC_FRAMEDONE_MASK			0x00100000
+#define     SLV_IRQ(irq)			((irq) << 19)
+#define     SLV_IRQ_MASK			0x00080000
+#define     SPI_IRQ(irq)			((irq) << 18)
+#define     SPI_IRQ_MASK			0x00040000
+#define     PWRDN_IRQ(irq)			((irq) << 17)
+#define     PWRDN_IRQ_MASK			0x00020000
+#define     ERR_IRQ(irq)			((irq) << 16)
+#define     ERR_IRQ_MASK			0x00010000
+/* read-only */
+#define     DMA_FRAME_IRQ0_LEVEL_MASK		0x00008000
+#define     DMA_FRAME_IRQ1_LEVEL_MASK		0x00004000
+#define     DMA_FRAME_CNT_ISR_MASK		0x00003000
+#define     GRA_FRAME_IRQ0_LEVEL_MASK		0x00000800
+#define     GRA_FRAME_IRQ1_LEVEL_MASK		0x00000400
+#define     GRA_FRAME_CNT_ISR_MASK		0x00000300
+#define     VSYNC_IRQ_LEVEL_MASK		0x00000080
+#define     DUMB_FRAMEDONE_LEVEL_MASK		0x00000040
+#define     TWC_FRAMEDONE_LEVEL_MASK		0x00000020
+#define     HWC_FRAMEDONE_LEVEL_MASK		0x00000010
+#define     SLV_FF_EMPTY_MASK			0x00000008
+#define     DMA_FF_ALLEMPTY_MASK		0x00000004
+#define     GRA_FF_ALLEMPTY_MASK		0x00000002
+#define     PWRDN_IRQ_LEVEL_MASK		0x00000001
+
+
+/*
+ * defined Video Memory Color format for DMA control 0 register
+ * DMA0 bit[23:20]
+ */
+#define VMODE_RGB565		0x0
+#define VMODE_RGB1555		0x1
+#define VMODE_RGB888PACKED	0x2
+#define VMODE_RGB888UNPACKED	0x3
+#define VMODE_RGBA888		0x4
+#define VMODE_YUV422PACKED	0x5
+#define VMODE_YUV422PLANAR	0x6
+#define VMODE_YUV420PLANAR	0x7
+#define VMODE_SMPNCMD		0x8
+#define VMODE_PALETTE4BIT	0x9
+#define VMODE_PALETTE8BIT	0xa
+#define VMODE_RESERVED		0xb
+
+/*
+ * defined Graphic Memory Color format for DMA control 0 register
+ * DMA0 bit[19:16]
+ */
+#define GMODE_RGB565		0x0
+#define GMODE_RGB1555		0x1
+#define GMODE_RGB888PACKED	0x2
+#define GMODE_RGB888UNPACKED	0x3
+#define GMODE_RGBA888		0x4
+#define GMODE_YUV422PACKED	0x5
+#define GMODE_YUV422PLANAR	0x6
+#define GMODE_YUV420PLANAR	0x7
+#define GMODE_SMPNCMD		0x8
+#define GMODE_PALETTE4BIT	0x9
+#define GMODE_PALETTE8BIT	0xa
+#define GMODE_RESERVED		0xb
+
+/*
+ * define for DMA control 1 register
+ */
+#define DMA1_FRAME_TRIG		31 /* bit location */
+#define DMA1_VSYNC_MODE		28
+#define DMA1_VSYNC_INV		27
+#define DMA1_CKEY		24
+#define DMA1_CARRY		23
+#define DMA1_LNBUF_ENA		22
+#define DMA1_GATED_ENA		21
+#define DMA1_PWRDN_ENA		20
+#define DMA1_DSCALE		18
+#define DMA1_ALPHA_MODE		16
+#define DMA1_ALPHA		08
+#define DMA1_PXLCMD		00
+
+/*
+ * defined for Configure Dumb Mode
+ * DUMB LCD Panel bit[31:28]
+ */
+#define DUMB16_RGB565_0		0x0
+#define DUMB16_RGB565_1		0x1
+#define DUMB18_RGB666_0		0x2
+#define DUMB18_RGB666_1		0x3
+#define DUMB12_RGB444_0		0x4
+#define DUMB12_RGB444_1		0x5
+#define DUMB24_RGB888_0		0x6
+#define DUMB_BLANK		0x7
+
+/*
+ * defined for Configure I/O Pin Allocation Mode
+ * LCD LCD I/O Pads control register bit[3:0]
+ */
+#define IOPAD_DUMB24		0x0
+#define IOPAD_DUMB18SPI		0x1
+#define IOPAD_DUMB18GPIO	0x2
+#define IOPAD_DUMB16SPI		0x3
+#define IOPAD_DUMB16GPIO	0x4
+#define IOPAD_DUMB12		0x5
+#define IOPAD_SMART18SPI	0x6
+#define IOPAD_SMART16SPI	0x7
+#define IOPAD_SMART8BOTH	0x8
+
+#endif /* __PXA168FB_H__ */
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 0726aecf3b7..0deb0a8867b 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -2,6 +2,7 @@
  *
  * (c) 2004 Simtec Electronics
  * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * (c) 2009 Kristoffer Ericson <kristoffer.ericson@gmail.com>
  *
  * Driver for Epson S1D13xxx series framebuffer chips
  *
@@ -10,18 +11,10 @@
  *  linux/drivers/video/epson1355fb.c
  *  linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson)
  *
- * Note, currently only tested on S1D13806 with 16bit CRT.
- * As such, this driver might still contain some hardcoded bits relating to
- * S1D13806.
- * Making it work on other S1D13XXX chips should merely be a matter of adding
- * a few switch()s, some missing glue here and there maybe, and split header
- * files.
- *
  * TODO: - handle dual screen display (CRT and LCD at the same time).
  *	 - check_var(), mode change, etc.
- *	 - PM untested.
- *	 - Accelerated interfaces.
- *	 - Probably not SMP safe :)
+ *	 - probably not SMP safe :)
+ *       - support all bitblt operations on all cards
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file COPYING in the main directory of this archive for
@@ -31,19 +24,24 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
 #include <linux/fb.h>
+#include <linux/spinlock_types.h>
+#include <linux/spinlock.h>
 
 #include <asm/io.h>
 
 #include <video/s1d13xxxfb.h>
 
-#define PFX "s1d13xxxfb: "
+#define PFX	"s1d13xxxfb: "
+#define BLIT	"s1d13xxxfb_bitblt: "
 
+/*
+ * set this to enable debugging on general functions
+ */
 #if 0
 #define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0)
 #else
@@ -51,7 +49,21 @@
 #endif
 
 /*
- * List of card production ids
+ * set this to enable debugging on 2D acceleration
+ */
+#if 0
+#define dbg_blit(fmt, args...) do { printk(KERN_INFO BLIT fmt, ## args); } while (0)
+#else
+#define dbg_blit(fmt, args...) do { } while (0)
+#endif
+
+/*
+ * we make sure only one bitblt operation is running
+ */
+static DEFINE_SPINLOCK(s1d13xxxfb_bitblt_lock);
+
+/*
+ * list of card production ids
  */
 static const int s1d13xxxfb_prod_ids[] = {
 	S1D13505_PROD_ID,
@@ -69,7 +81,7 @@ static const char *s1d13xxxfb_prod_names[] = {
 };
 
 /*
- * Here we define the default struct fb_fix_screeninfo
+ * here we define the default struct fb_fix_screeninfo
  */
 static struct fb_fix_screeninfo __devinitdata s1d13xxxfb_fix = {
 	.id		= S1D_FBID,
@@ -145,8 +157,10 @@ crt_enable(struct s1d13xxxfb_par *par, int enable)
 	s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode);
 }
 
-/* framebuffer control routines */
 
+/*************************************************************
+ framebuffer control functions
+ *************************************************************/
 static inline void
 s1d13xxxfb_setup_pseudocolour(struct fb_info *info)
 {
@@ -242,13 +256,13 @@ s1d13xxxfb_set_par(struct fb_info *info)
 }
 
 /**
- *  	s1d13xxxfb_setcolreg - sets a color register.
- *      @regno: Which register in the CLUT we are programming
- *      @red: The red value which can be up to 16 bits wide
+ *	s1d13xxxfb_setcolreg - sets a color register.
+ *	@regno: Which register in the CLUT we are programming
+ *	@red: The red value which can be up to 16 bits wide
  *	@green: The green value which can be up to 16 bits wide
  *	@blue:  The blue value which can be up to 16 bits wide.
  *	@transp: If supported the alpha value which can be up to 16 bits wide.
- *      @info: frame buffer info structure
+ *	@info: frame buffer info structure
  *
  *	Returns negative errno on error, or zero on success.
  */
@@ -351,15 +365,15 @@ s1d13xxxfb_blank(int blank_mode, struct fb_info *info)
 }
 
 /**
- *      s1d13xxxfb_pan_display - Pans the display.
- *      @var: frame buffer variable screen structure
- *      @info: frame buffer structure that represents a single frame buffer
+ *	s1d13xxxfb_pan_display - Pans the display.
+ *	@var: frame buffer variable screen structure
+ *	@info: frame buffer structure that represents a single frame buffer
  *
  *	Pan (or wrap, depending on the `vmode' field) the display using the
- *  	`yoffset' field of the `var' structure (`xoffset'  not yet supported).
- *  	If the values don't fit, return -EINVAL.
+ *	`yoffset' field of the `var' structure (`xoffset'  not yet supported).
+ *	If the values don't fit, return -EINVAL.
  *
- *      Returns negative errno on error, or zero on success.
+ *	Returns negative errno on error, or zero on success.
  */
 static int
 s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -390,8 +404,259 @@ s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 	return 0;
 }
 
-/* framebuffer information structures */
+/************************************************************
+ functions to handle bitblt acceleration
+ ************************************************************/
+
+/**
+ *	bltbit_wait_bitset - waits for change in register value
+ *	@info : framebuffer structure
+ *	@bit  : value expected in register
+ *	@timeout : ...
+ *
+ *	waits until value changes INTO bit
+ */
+static u8
+bltbit_wait_bitset(struct fb_info *info, u8 bit, int timeout)
+{
+	while (!(s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit)) {
+		udelay(10);
+		if (!--timeout) {
+			dbg_blit("wait_bitset timeout\n");
+			break;
+		}
+	}
+
+	return timeout;
+}
+
+/**
+ *	bltbit_wait_bitclear - waits for change in register value
+ *	@info : frambuffer structure
+ *	@bit  : value currently in register
+ *	@timeout : ...
+ *
+ *	waits until value changes FROM bit
+ *
+ */
+static u8
+bltbit_wait_bitclear(struct fb_info *info, u8 bit, int timeout)
+{
+	while (s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit) {
+		udelay(10);
+		if (!--timeout) {
+			dbg_blit("wait_bitclear timeout\n");
+			break;
+		}
+	}
+
+	return timeout;
+}
+
+/**
+ *	bltbit_fifo_status - checks the current status of the fifo
+ *	@info : framebuffer structure
+ *
+ *	returns number of free words in buffer
+ */
+static u8
+bltbit_fifo_status(struct fb_info *info)
+{
+	u8 status;
 
+	status = s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0);
+
+	/* its empty so room for 16 words */
+	if (status & BBLT_FIFO_EMPTY)
+		return 16;
+
+	/* its full so we dont want to add */
+	if (status & BBLT_FIFO_FULL)
+		return 0;
+
+	/* its atleast half full but we can add one atleast */
+	if (status & BBLT_FIFO_NOT_FULL)
+		return 1;
+
+	return 0;
+}
+
+/*
+ *	s1d13xxxfb_bitblt_copyarea - accelerated copyarea function
+ *	@info : framebuffer structure
+ *	@area : fb_copyarea structure
+ *
+ *	supports (atleast) S1D13506
+ *
+ */
+static void
+s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+	u32 dst, src;
+	u32 stride;
+	u16 reverse = 0;
+	u16 sx = area->sx, sy = area->sy;
+	u16 dx = area->dx, dy = area->dy;
+	u16 width = area->width, height = area->height;
+	u16 bpp;
+
+	spin_lock(&s1d13xxxfb_bitblt_lock);
+
+	/* bytes per xres line */
+	bpp = (info->var.bits_per_pixel >> 3);
+	stride = bpp * info->var.xres;
+
+	/* reverse, calculate the last pixel in rectangle */
+	if ((dy > sy) || ((dy == sy) && (dx >= sx))) {
+		dst = (((dy + height - 1) * stride) + (bpp * (dx + width - 1)));
+		src = (((sy + height - 1) * stride) + (bpp * (sx + width - 1)));
+		reverse = 1;
+	/* not reverse, calculate the first pixel in rectangle */
+	} else { /* (y * xres) + (bpp * x) */
+		dst = (dy * stride) + (bpp * dx);
+		src = (sy * stride) + (bpp * sx);
+	}
+
+	/* set source adress */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff));
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff);
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff);
+
+	/* set destination adress */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff));
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff);
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff);
+
+	/* program height and width */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, (width & 0xff) - 1);
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (width >> 8));
+
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, (height & 0xff) - 1);
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (height >> 8));
+
+	/* negative direction ROP */
+	if (reverse == 1) {
+		dbg_blit("(copyarea) negative rop\n");
+		s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x03);
+	} else /* positive direction ROP */ {
+		s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x02);
+		dbg_blit("(copyarea) positive rop\n");
+	}
+
+	/* set for rectangel mode and not linear */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0);
+
+	/* setup the bpp 1 = 16bpp, 0 = 8bpp*/
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (bpp >> 1));
+
+	/* set words per xres */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (stride >> 1) & 0xff);
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (stride >> 9));
+
+	dbg_blit("(copyarea) dx=%d, dy=%d\n", dx, dy);
+	dbg_blit("(copyarea) sx=%d, sy=%d\n", sx, sy);
+	dbg_blit("(copyarea) width=%d, height=%d\n", width - 1, height - 1);
+	dbg_blit("(copyarea) stride=%d\n", stride);
+	dbg_blit("(copyarea) bpp=%d=0x0%d, mem_offset1=%d, mem_offset2=%d\n", bpp, (bpp >> 1),
+		(stride >> 1) & 0xff, stride >> 9);
+
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CC_EXP, 0x0c);
+
+	/* initialize the engine */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80);
+
+	/* wait to complete */
+	bltbit_wait_bitclear(info, 0x80, 8000);
+
+	spin_unlock(&s1d13xxxfb_bitblt_lock);
+}
+
+/**
+ *
+ *	s1d13xxxfb_bitblt_solidfill - accelerated solidfill function
+ *	@info : framebuffer structure
+ *	@rect : fb_fillrect structure
+ *
+ *	supports (atleast 13506)
+ *
+ **/
+static void
+s1d13xxxfb_bitblt_solidfill(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	u32 screen_stride, dest;
+	u32 fg;
+	u16 bpp = (info->var.bits_per_pixel >> 3);
+
+	/* grab spinlock */
+	spin_lock(&s1d13xxxfb_bitblt_lock);
+
+	/* bytes per x width */
+	screen_stride = (bpp * info->var.xres);
+
+	/* bytes to starting point */
+	dest = ((rect->dy * screen_stride) + (bpp * rect->dx));
+
+	dbg_blit("(solidfill) dx=%d, dy=%d, stride=%d, dest=%d\n"
+		 "(solidfill) : rect_width=%d, rect_height=%d\n",
+				rect->dx, rect->dy, screen_stride, dest,
+				rect->width - 1, rect->height - 1);
+
+	dbg_blit("(solidfill) : xres=%d, yres=%d, bpp=%d\n",
+				info->var.xres, info->var.yres,
+				info->var.bits_per_pixel);
+	dbg_blit("(solidfill) : rop=%d\n", rect->rop);
+
+	/* We split the destination into the three registers */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dest & 0x00ff));
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, ((dest >> 8) & 0x00ff));
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, ((dest >> 16) & 0x00ff));
+
+	/* give information regarding rectangel width */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, ((rect->width) & 0x00ff) - 1);
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (rect->width >> 8));
+
+	/* give information regarding rectangel height */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, ((rect->height) & 0x00ff) - 1);
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (rect->height >> 8));
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+		info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
+		fg = ((u32 *)info->pseudo_palette)[rect->color];
+		dbg_blit("(solidfill) truecolor/directcolor\n");
+		dbg_blit("(solidfill) pseudo_palette[%d] = %d\n", rect->color, fg);
+	} else {
+		fg = rect->color;
+		dbg_blit("(solidfill) color = %d\n", rect->color);
+	}
+
+	/* set foreground color */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC0, (fg & 0xff));
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC1, (fg >> 8) & 0xff);
+
+	/* set rectangual region of memory (rectangle and not linear) */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0);
+
+	/* set operation mode SOLID_FILL */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, BBLT_SOLID_FILL);
+
+	/* set bits per pixel (1 = 16bpp, 0 = 8bpp) */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (info->var.bits_per_pixel >> 4));
+
+	/* set the memory offset for the bblt in word sizes */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (screen_stride >> 1) & 0x00ff);
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (screen_stride >> 9));
+
+	/* and away we go.... */
+	s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80);
+
+	/* wait until its done */
+	bltbit_wait_bitclear(info, 0x80, 8000);
+
+	/* let others play */
+	spin_unlock(&s1d13xxxfb_bitblt_lock);
+}
+
+/* framebuffer information structures */
 static struct fb_ops s1d13xxxfb_fbops = {
 	.owner		= THIS_MODULE,
 	.fb_set_par	= s1d13xxxfb_set_par,
@@ -400,7 +665,7 @@ static struct fb_ops s1d13xxxfb_fbops = {
 
 	.fb_pan_display	= s1d13xxxfb_pan_display,
 
-	/* to be replaced by any acceleration we can */
+	/* gets replaced at chip detection time */
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
 	.fb_imageblit	= cfb_imageblit,
@@ -412,9 +677,9 @@ static int s1d13xxxfb_width_tab[2][4] __devinitdata = {
 };
 
 /**
- *      s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to
+ *	s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to
  *	hardware setup.
- *      @info: frame buffer structure
+ *	@info: frame buffer structure
  *
  *	We setup the framebuffer structures according to the current
  *	hardware setup. On some machines, the BIOS will have filled
@@ -569,7 +834,6 @@ s1d13xxxfb_probe(struct platform_device *pdev)
 	if (pdata && pdata->platform_init_video)
 		pdata->platform_init_video();
 
-
 	if (pdev->num_resources != 2) {
 		dev_err(&pdev->dev, "invalid num_resources: %i\n",
 		       pdev->num_resources);
@@ -655,16 +919,27 @@ s1d13xxxfb_probe(struct platform_device *pdev)
 
 	info->fix = s1d13xxxfb_fix;
 	info->fix.mmio_start = pdev->resource[1].start;
-	info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start +1;
+	info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start + 1;
 	info->fix.smem_start = pdev->resource[0].start;
-	info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start +1;
+	info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 
 	printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n",
 	       default_par->regs, info->fix.smem_len / 1024, info->screen_base);
 
 	info->par = default_par;
-	info->fbops = &s1d13xxxfb_fbops;
 	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+	info->fbops = &s1d13xxxfb_fbops;
+
+	switch(prod_id) {
+	case S1D13506_PROD_ID:	/* activate acceleration */
+		s1d13xxxfb_fbops.fb_fillrect = s1d13xxxfb_bitblt_solidfill;
+		s1d13xxxfb_fbops.fb_copyarea = s1d13xxxfb_bitblt_copyarea;
+		info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+			FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
+		break;
+	default:
+		break;
+	}
 
 	/* perform "manual" chip initialization, if needed */
 	if (pdata && pdata->initregs)
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index d3a568e6b16..43680e54542 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -358,9 +358,16 @@ static int s3c_fb_set_par(struct fb_info *info)
 	writel(data, regs + VIDOSD_B(win_no));
 
 	data = var->xres * var->yres;
+
+	u32 osdc_data = 0;
+
+	osdc_data = VIDISD14C_ALPHA1_R(0xf) |
+		VIDISD14C_ALPHA1_G(0xf) |
+		VIDISD14C_ALPHA1_B(0xf);
+
 	if (s3c_fb_has_osd_d(win_no)) {
 		writel(data, regs + VIDOSD_D(win_no));
-		writel(0, regs + VIDOSD_C(win_no));
+		writel(osdc_data, regs + VIDOSD_C(win_no));
 	} else
 		writel(data, regs + VIDOSD_C(win_no));
 
@@ -409,8 +416,12 @@ static int s3c_fb_set_par(struct fb_info *info)
 				data |= WINCON1_BPPMODE_19BPP_A1666;
 			else
 				data |= WINCON1_BPPMODE_18BPP_666;
-		} else if (var->transp.length != 0)
-			data |= WINCON1_BPPMODE_25BPP_A1888;
+		} else if (var->transp.length == 1)
+			data |= WINCON1_BPPMODE_25BPP_A1888
+				| WINCON1_BLD_PIX;
+		else if (var->transp.length == 4)
+			data |= WINCON1_BPPMODE_28BPP_A4888
+				| WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
 		else
 			data |= WINCON0_BPPMODE_24BPP_888;
 
@@ -418,6 +429,20 @@ static int s3c_fb_set_par(struct fb_info *info)
 		break;
 	}
 
+	/* It has no color key control register for window0 */
+	if (win_no > 0) {
+		u32 keycon0_data = 0, keycon1_data = 0;
+
+		keycon0_data = ~(WxKEYCON0_KEYBL_EN |
+				WxKEYCON0_KEYEN_F |
+				WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
+
+		keycon1_data = WxKEYCON1_COLVAL(0xffffff);
+
+		writel(keycon0_data, regs + WxKEYCONy(win_no-1, 0));
+		writel(keycon1_data, regs + WxKEYCONy(win_no-1, 1));
+	}
+
 	writel(data, regs + WINCON(win_no));
 	writel(0x0, regs + WINxMAP(win_no));
 
@@ -700,9 +725,12 @@ static void s3c_fb_free_memory(struct s3c_fb *sfb, struct s3c_fb_win *win)
  */
 static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win)
 {
-	fb_dealloc_cmap(&win->fbinfo->cmap);
-	unregister_framebuffer(win->fbinfo);
-	s3c_fb_free_memory(sfb, win);
+	if (win->fbinfo) {
+		unregister_framebuffer(win->fbinfo);
+		fb_dealloc_cmap(&win->fbinfo->cmap);
+		s3c_fb_free_memory(sfb, win);
+		framebuffer_release(win->fbinfo);
+	}
 }
 
 /**
@@ -753,7 +781,7 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
 	ret = s3c_fb_alloc_memory(sfb, win);
 	if (ret) {
 		dev_err(sfb->dev, "failed to allocate display memory\n");
-		goto err_framebuffer;
+		return ret;
 	}
 
 	/* setup the r/b/g positions for the window's palette */
@@ -776,7 +804,7 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
 	ret = s3c_fb_check_var(&fbinfo->var, fbinfo);
 	if (ret < 0) {
 		dev_err(sfb->dev, "check_var failed on initial video params\n");
-		goto err_alloc_mem;
+		return ret;
 	}
 
 	/* create initial colour map */
@@ -796,20 +824,13 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
 	ret = register_framebuffer(fbinfo);
 	if (ret < 0) {
 		dev_err(sfb->dev, "failed to register framebuffer\n");
-		goto err_alloc_mem;
+		return ret;
 	}
 
 	*res = win;
 	dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id);
 
 	return 0;
-
-err_alloc_mem:
-	s3c_fb_free_memory(sfb, win);
-
-err_framebuffer:
-	unregister_framebuffer(fbinfo);
-	return ret;
 }
 
 /**
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index b0b4513ba53..7da0027e240 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <asm/io.h>
 #include <asm/div64.h>
@@ -89,7 +90,7 @@ static void s3c2410fb_set_lcdaddr(struct fb_info *info)
 static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi,
 					  unsigned long pixclk)
 {
-	unsigned long clk = clk_get_rate(fbi->clk);
+	unsigned long clk = fbi->clk_rate;
 	unsigned long long div;
 
 	/* pixclk is in picoseconds, our clock is in Hz
@@ -758,6 +759,57 @@ static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
+					unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freqs = data;
+	struct s3c2410fb_info *info;
+	struct fb_info *fbinfo;
+	long delta_f;
+
+	info = container_of(nb, struct s3c2410fb_info, freq_transition);
+	fbinfo = platform_get_drvdata(to_platform_device(info->dev));
+
+	/* work out change, <0 for speed-up */
+	delta_f = info->clk_rate - clk_get_rate(info->clk);
+
+	if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
+	    (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
+		info->clk_rate = clk_get_rate(info->clk);
+		s3c2410fb_activate_var(fbinfo);
+	}
+
+	return 0;
+}
+
+static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
+{
+	info->freq_transition.notifier_call = s3c2410fb_cpufreq_transition;
+
+	return cpufreq_register_notifier(&info->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
+{
+	cpufreq_unregister_notifier(&info->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
+{
+	return 0;
+}
+
+static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
+{
+}
+#endif
+
+
 static char driver_name[] = "s3c2410fb";
 
 static int __init s3c24xxfb_probe(struct platform_device *pdev,
@@ -875,6 +927,8 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev,
 
 	msleep(1);
 
+	info->clk_rate = clk_get_rate(info->clk);
+
 	/* find maximum required memory size for display */
 	for (i = 0; i < mach_info->num_displays; i++) {
 		unsigned long smem_len = mach_info->displays[i].xres;
@@ -904,11 +958,17 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev,
 
 	s3c2410fb_check_var(&fbinfo->var, fbinfo);
 
+	ret = s3c2410fb_cpufreq_register(info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register cpufreq\n");
+		goto free_video_memory;
+	}
+
 	ret = register_framebuffer(fbinfo);
 	if (ret < 0) {
 		printk(KERN_ERR "Failed to register framebuffer device: %d\n",
 			ret);
-		goto free_video_memory;
+		goto free_cpufreq;
 	}
 
 	/* create device files */
@@ -922,6 +982,8 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev,
 
 	return 0;
 
+ free_cpufreq:
+	s3c2410fb_cpufreq_deregister(info);
 free_video_memory:
 	s3c2410fb_unmap_video_memory(fbinfo);
 release_clock:
@@ -961,6 +1023,7 @@ static int s3c2410fb_remove(struct platform_device *pdev)
 	int irq;
 
 	unregister_framebuffer(fbinfo);
+	s3c2410fb_cpufreq_deregister(info);
 
 	s3c2410fb_lcd_enable(info, 0);
 	msleep(1);
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h
index 9a6ba3e9d1b..47a17bd2301 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/s3c2410fb.h
@@ -29,8 +29,13 @@ struct s3c2410fb_info {
 	enum s3c_drv_type	drv_type;
 	struct s3c2410fb_hw	regs;
 
+	unsigned long		clk_rate;
 	unsigned int		palette_ready;
 
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
+
 	/* keep these registers in case we need to re-write palette */
 	u32			palette_buffer[256];
 	u32			pseudo_pal[16];
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7e17ee95a97..7072d19080d 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -5928,7 +5928,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if(pci_enable_device(pdev)) {
 			if(ivideo->nbridge) pci_dev_put(ivideo->nbridge);
 			pci_set_drvdata(pdev, NULL);
-			kfree(sis_fb_info);
+			framebuffer_release(sis_fb_info);
 			return -EIO;
 		}
 	}
@@ -6134,7 +6134,7 @@ error_3:	vfree(ivideo->bios_abase);
 		pci_set_drvdata(pdev, NULL);
 		if(!ivideo->sisvga_enabled)
 			pci_disable_device(pdev);
-		kfree(sis_fb_info);
+		framebuffer_release(sis_fb_info);
 		return ret;
 	}
 
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index eabaad765ae..eec9dcb7f59 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1380,7 +1380,7 @@ stifb_cleanup(void)
 				if (info->screen_base)
 					iounmap(info->screen_base);
 		        fb_dealloc_cmap(&info->cmap);
-		        kfree(info); 
+		        framebuffer_release(info);
 		}
 		sti->info = NULL;
 	}
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index 643afbfe827..45b883598bf 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -116,17 +116,16 @@ struct tcx_par {
 	u32			flags;
 #define TCX_FLAG_BLANKED	0x00000001
 
-	unsigned long		physbase;
 	unsigned long		which_io;
-	unsigned long		fbsize;
 
 	struct sbus_mmap_map	mmap_map[TCX_MMAP_ENTRIES];
 	int			lowdepth;
 };
 
 /* Reset control plane so that WID is 8-bit plane. */
-static void __tcx_set_control_plane(struct tcx_par *par)
+static void __tcx_set_control_plane(struct fb_info *info)
 {
+	struct tcx_par *par = info->par;
 	u32 __iomem *p, *pend;
 
 	if (par->lowdepth)
@@ -135,7 +134,7 @@ static void __tcx_set_control_plane(struct tcx_par *par)
 	p = par->cplane;
 	if (p == NULL)
 		return;
-	for (pend = p + par->fbsize; p < pend; p++) {
+	for (pend = p + info->fix.smem_len; p < pend; p++) {
 		u32 tmp = sbus_readl(p);
 
 		tmp &= 0xffffff;
@@ -149,7 +148,7 @@ static void tcx_reset(struct fb_info *info)
 	unsigned long flags;
 
 	spin_lock_irqsave(&par->lock, flags);
-	__tcx_set_control_plane(par);
+	__tcx_set_control_plane(info);
 	spin_unlock_irqrestore(&par->lock, flags);
 }
 
@@ -304,7 +303,7 @@ static int tcx_mmap(struct fb_info *info, struct vm_area_struct *vma)
 	struct tcx_par *par = (struct tcx_par *)info->par;
 
 	return sbusfb_mmap_helper(par->mmap_map,
-				  par->physbase, par->fbsize,
+				  info->fix.smem_start, info->fix.smem_len,
 				  par->which_io, vma);
 }
 
@@ -316,7 +315,7 @@ static int tcx_ioctl(struct fb_info *info, unsigned int cmd,
 	return sbusfb_ioctl_helper(cmd, arg, info,
 				   FBTYPE_TCXCOLOR,
 				   (par->lowdepth ? 8 : 24),
-				   par->fbsize);
+				   info->fix.smem_len);
 }
 
 /*
@@ -358,10 +357,10 @@ static void tcx_unmap_regs(struct of_device *op, struct fb_info *info,
 			   par->bt, sizeof(struct bt_regs));
 	if (par->cplane)
 		of_iounmap(&op->resource[4],
-			   par->cplane, par->fbsize * sizeof(u32));
+			   par->cplane, info->fix.smem_len * sizeof(u32));
 	if (info->screen_base)
 		of_iounmap(&op->resource[0],
-			   info->screen_base, par->fbsize);
+			   info->screen_base, info->fix.smem_len);
 }
 
 static int __devinit tcx_probe(struct of_device *op,
@@ -391,7 +390,7 @@ static int __devinit tcx_probe(struct of_device *op,
 
 	linebytes = of_getintprop_default(dp, "linebytes",
 					  info->var.xres);
-	par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
+	info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
 
 	par->tec = of_ioremap(&op->resource[7], 0,
 				  sizeof(struct tcx_tec), "tcx tec");
@@ -400,7 +399,7 @@ static int __devinit tcx_probe(struct of_device *op,
 	par->bt = of_ioremap(&op->resource[8], 0,
 				 sizeof(struct bt_regs), "tcx dac");
 	info->screen_base = of_ioremap(&op->resource[0], 0,
-					   par->fbsize, "tcx ram");
+					   info->fix.smem_len, "tcx ram");
 	if (!par->tec || !par->thc ||
 	    !par->bt || !info->screen_base)
 		goto out_unmap_regs;
@@ -408,7 +407,7 @@ static int __devinit tcx_probe(struct of_device *op,
 	memcpy(&par->mmap_map, &__tcx_mmap_map, sizeof(par->mmap_map));
 	if (!par->lowdepth) {
 		par->cplane = of_ioremap(&op->resource[4], 0,
-					     par->fbsize * sizeof(u32),
+					     info->fix.smem_len * sizeof(u32),
 					     "tcx cplane");
 		if (!par->cplane)
 			goto out_unmap_regs;
@@ -419,7 +418,7 @@ static int __devinit tcx_probe(struct of_device *op,
 		par->mmap_map[6].size = SBUS_MMAP_EMPTY;
 	}
 
-	par->physbase = op->resource[0].start;
+	info->fix.smem_start = op->resource[0].start;
 	par->which_io = op->resource[0].flags & IORESOURCE_BITS;
 
 	for (i = 0; i < TCX_MMAP_ENTRIES; i++) {
@@ -473,7 +472,7 @@ static int __devinit tcx_probe(struct of_device *op,
 	printk(KERN_INFO "%s: TCX at %lx:%lx, %s\n",
 	       dp->full_name,
 	       par->which_io,
-	       par->physbase,
+	       info->fix.smem_start,
 	       par->lowdepth ? "8-bit only" : "24-bit depth");
 
 	return 0;
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 89f231dc443..ff43c888502 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -1315,7 +1315,6 @@ static int __devinit tdfxfb_setup_i2c_bus(struct tdfxfb_i2c_chan *chan,
 
 	strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name));
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.class		= I2C_CLASS_TV_ANALOG;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= dev;
 	chan->algo.setsda		= tdfxfb_i2c_setsda;
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index d6856f43d24..bd37ee1f6a2 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -174,8 +174,17 @@ static int vesafb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	return err;
 }
 
+static void vesafb_destroy(struct fb_info *info)
+{
+	if (info->screen_base)
+		iounmap(info->screen_base);
+	release_mem_region(info->aperture_base, info->aperture_size);
+	framebuffer_release(info);
+}
+
 static struct fb_ops vesafb_ops = {
 	.owner		= THIS_MODULE,
+	.fb_destroy     = vesafb_destroy,
 	.fb_setcolreg	= vesafb_setcolreg,
 	.fb_pan_display	= vesafb_pan_display,
 	.fb_fillrect	= cfb_fillrect,
@@ -286,6 +295,10 @@ static int __init vesafb_probe(struct platform_device *dev)
 	info->pseudo_palette = info->par;
 	info->par = NULL;
 
+	/* set vesafb aperture size for generic probing */
+	info->aperture_base = screen_info.lfb_base;
+	info->aperture_size = size_total;
+
 	info->screen_base = ioremap(vesafb_fix.smem_start, vesafb_fix.smem_len);
 	if (!info->screen_base) {
 		printk(KERN_ERR
@@ -437,7 +450,7 @@ static int __init vesafb_probe(struct platform_device *dev)
 	info->fbops = &vesafb_ops;
 	info->var = vesafb_defined;
 	info->fix = vesafb_fix;
-	info->flags = FBINFO_FLAG_DEFAULT |
+	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE |
 		(ypan ? FBINFO_HWACCEL_YPAN : 0);
 
 	if (!ypan)
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index 2493f05e9f6..15502d5e364 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -384,7 +384,7 @@ static int __devinit xenfb_probe(struct xenbus_device *dev,
 		fb_size = XENFB_DEFAULT_FB_LEN;
 	}
 
-	dev->dev.driver_data = info;
+	dev_set_drvdata(&dev->dev, info);
 	info->xbdev = dev;
 	info->irq = -1;
 	info->x1 = info->y1 = INT_MAX;
@@ -503,7 +503,7 @@ xenfb_make_preferred_console(void)
 
 static int xenfb_resume(struct xenbus_device *dev)
 {
-	struct xenfb_info *info = dev->dev.driver_data;
+	struct xenfb_info *info = dev_get_drvdata(&dev->dev);
 
 	xenfb_disconnect_backend(info);
 	xenfb_init_shared_page(info, info->fb_info);
@@ -512,7 +512,7 @@ static int xenfb_resume(struct xenbus_device *dev)
 
 static int xenfb_remove(struct xenbus_device *dev)
 {
-	struct xenfb_info *info = dev->dev.driver_data;
+	struct xenfb_info *info = dev_get_drvdata(&dev->dev);
 
 	xenfb_disconnect_backend(info);
 	if (info->fb_info) {
@@ -621,7 +621,7 @@ static void xenfb_disconnect_backend(struct xenfb_info *info)
 static void xenfb_backend_changed(struct xenbus_device *dev,
 				  enum xenbus_state backend_state)
 {
-	struct xenfb_info *info = dev->dev.driver_data;
+	struct xenfb_info *info = dev_get_drvdata(&dev->dev);
 	int val;
 
 	switch (backend_state) {
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 40a3a2afbfe..7a868bd16e0 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -1,13 +1,12 @@
 /*
- * xilinxfb.c
- *
- * Xilinx TFT LCD frame buffer driver
+ * Xilinx TFT frame buffer driver
  *
  * Author: MontaVista Software, Inc.
  *         source@mvista.com
  *
  * 2002-2007 (c) MontaVista Software, Inc.
  * 2007 (c) Secret Lab Technologies, Ltd.
+ * 2009 (c) Xilinx Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -24,33 +23,38 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#if defined(CONFIG_OF)
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#endif
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/xilinxfb.h>
+#include <asm/dcr.h>
 
 #define DRIVER_NAME		"xilinxfb"
-#define DRIVER_DESCRIPTION	"Xilinx TFT LCD frame buffer driver"
+
 
 /*
  * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for
- * the VGA port on the Xilinx ML40x board. This is a hardware display controller
- * for a 640x480 resolution TFT or VGA screen.
+ * the VGA port on the Xilinx ML40x board. This is a hardware display
+ * controller for a 640x480 resolution TFT or VGA screen.
  *
  * The interface to the framebuffer is nice and simple.  There are two
  * control registers.  The first tells the LCD interface where in memory
  * the frame buffer is (only the 11 most significant bits are used, so
  * don't start thinking about scrolling).  The second allows the LCD to
  * be turned on or off as well as rotated 180 degrees.
+ *
+ * In case of direct PLB access the second control register will be at
+ * an offset of 4 as compared to the DCR access where the offset is 1
+ * i.e. REG_CTRL. So this is taken care in the function
+ * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
+ * direct PLB access.
  */
 #define NUM_REGS	2
 #define REG_FB_ADDR	0
@@ -107,17 +111,28 @@ static struct fb_var_screeninfo xilinx_fb_var = {
 	.activate =	FB_ACTIVATE_NOW
 };
 
+
+#define PLB_ACCESS_FLAG	0x1		/* 1 = PLB, 0 = DCR */
+
 struct xilinxfb_drvdata {
 
 	struct fb_info	info;		/* FB driver info record */
 
-	u32		regs_phys;	/* phys. address of the control registers */
-	u32 __iomem	*regs;		/* virt. address of the control registers */
+	phys_addr_t	regs_phys;	/* phys. address of the control
+						registers */
+	void __iomem	*regs;		/* virt. address of the control
+						registers */
+
+	dcr_host_t      dcr_host;
+	unsigned int    dcr_start;
+	unsigned int    dcr_len;
 
 	void		*fb_virt;	/* virt. address of the frame buffer */
 	dma_addr_t	fb_phys;	/* phys. address of the frame buffer */
 	int		fb_alloced;	/* Flag, was the fb memory alloced? */
 
+	u8 		flags;		/* features of the driver */
+
 	u32		reg_ctrl_default;
 
 	u32		pseudo_palette[PALETTE_ENTRIES_NO];
@@ -128,14 +143,19 @@ struct xilinxfb_drvdata {
 	container_of(_info, struct xilinxfb_drvdata, info)
 
 /*
- * The LCD controller has DCR interface to its registers, but all
- * the boards and configurations the driver has been tested with
- * use opb2dcr bridge. So the registers are seen as memory mapped.
- * This macro is to make it simple to add the direct DCR access
- * when it's needed.
+ * The XPS TFT Controller can be accessed through PLB or DCR interface.
+ * To perform the read/write on the registers we need to check on
+ * which bus its connected and call the appropriate write API.
  */
-#define xilinx_fb_out_be32(driverdata, offset, val) \
-	out_be32(driverdata->regs + offset, val)
+static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+				u32 val)
+{
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		out_be32(drvdata->regs + (offset << 2), val);
+	else
+		dcr_write(drvdata->dcr_host, offset, val);
+
+}
 
 static int
 xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
@@ -203,35 +223,34 @@ static struct fb_ops xilinxfb_ops =
  * Bus independent setup/teardown
  */
 
-static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
+static int xilinxfb_assign(struct device *dev,
+			   struct xilinxfb_drvdata *drvdata,
+			   unsigned long physaddr,
 			   struct xilinxfb_platform_data *pdata)
 {
-	struct xilinxfb_drvdata *drvdata;
 	int rc;
 	int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
 
-	/* Allocate the driver data region */
-	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
-	if (!drvdata) {
-		dev_err(dev, "Couldn't allocate device private record\n");
-		return -ENOMEM;
-	}
-	dev_set_drvdata(dev, drvdata);
-
-	/* Map the control registers in */
-	if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
-		dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
-			physaddr);
-		rc = -ENODEV;
-		goto err_region;
-	}
-	drvdata->regs_phys = physaddr;
-	drvdata->regs = ioremap(physaddr, 8);
-	if (!drvdata->regs) {
-		dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
-			physaddr);
-		rc = -ENODEV;
-		goto err_map;
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		/*
+		 * Map the control registers in if the controller
+		 * is on direct PLB interface.
+		 */
+		if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
+			dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+				physaddr);
+			rc = -ENODEV;
+			goto err_region;
+		}
+
+		drvdata->regs_phys = physaddr;
+		drvdata->regs = ioremap(physaddr, 8);
+		if (!drvdata->regs) {
+			dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+				physaddr);
+			rc = -ENODEV;
+			goto err_map;
+		}
 	}
 
 	/* Allocate the framebuffer memory */
@@ -247,7 +266,10 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 	if (!drvdata->fb_virt) {
 		dev_err(dev, "Could not allocate frame buffer memory\n");
 		rc = -ENOMEM;
-		goto err_fbmem;
+		if (drvdata->flags & PLB_ACCESS_FLAG)
+			goto err_fbmem;
+		else
+			goto err_region;
 	}
 
 	/* Clear (turn to black) the framebuffer */
@@ -260,7 +282,8 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 	drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
 	if (pdata->rotate_screen)
 		drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
-	xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+	xilinx_fb_out_be32(drvdata, REG_CTRL,
+					drvdata->reg_ctrl_default);
 
 	/* Fill struct fb_info */
 	drvdata->info.device = dev;
@@ -296,11 +319,14 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 		goto err_regfb;
 	}
 
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		/* Put a banner in the log (for DEBUG) */
+		dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr,
+					drvdata->regs);
+	}
 	/* Put a banner in the log (for DEBUG) */
-	dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
-	dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
-		(unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
-		fbsize);
+	dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
+		(void *)drvdata->fb_phys, drvdata->fb_virt, fbsize);
 
 	return 0;	/* success */
 
@@ -311,14 +337,19 @@ err_cmap:
 	if (drvdata->fb_alloced)
 		dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
 			drvdata->fb_phys);
+	else
+		iounmap(drvdata->fb_virt);
+
 	/* Turn off the display */
 	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
 
 err_fbmem:
-	iounmap(drvdata->regs);
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		iounmap(drvdata->regs);
 
 err_map:
-	release_mem_region(physaddr, 8);
+	if (drvdata->flags & PLB_ACCESS_FLAG)
+		release_mem_region(physaddr, 8);
 
 err_region:
 	kfree(drvdata);
@@ -342,12 +373,18 @@ static int xilinxfb_release(struct device *dev)
 	if (drvdata->fb_alloced)
 		dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
 				  drvdata->fb_virt, drvdata->fb_phys);
+	else
+		iounmap(drvdata->fb_virt);
 
 	/* Turn off the display */
 	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
-	iounmap(drvdata->regs);
 
-	release_mem_region(drvdata->regs_phys, 8);
+	/* Release the resources, as allocated based on interface */
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		iounmap(drvdata->regs);
+		release_mem_region(drvdata->regs_phys, 8);
+	} else
+		dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
 
 	kfree(drvdata);
 	dev_set_drvdata(dev, NULL);
@@ -356,77 +393,57 @@ static int xilinxfb_release(struct device *dev)
 }
 
 /* ---------------------------------------------------------------------
- * Platform bus binding
- */
-
-static int
-xilinxfb_platform_probe(struct platform_device *pdev)
-{
-	struct xilinxfb_platform_data *pdata;
-	struct resource *res;
-
-	/* Find the registers address */
-	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Couldn't get registers resource\n");
-		return -ENODEV;
-	}
-
-	/* If a pdata structure is provided, then extract the parameters */
-	pdata = &xilinx_fb_default_pdata;
-	if (pdev->dev.platform_data) {
-		pdata = pdev->dev.platform_data;
-		if (!pdata->xres)
-			pdata->xres = xilinx_fb_default_pdata.xres;
-		if (!pdata->yres)
-			pdata->yres = xilinx_fb_default_pdata.yres;
-		if (!pdata->xvirt)
-			pdata->xvirt = xilinx_fb_default_pdata.xvirt;
-		if (!pdata->yvirt)
-			pdata->yvirt = xilinx_fb_default_pdata.yvirt;
-	}
-
-	return xilinxfb_assign(&pdev->dev, res->start, pdata);
-}
-
-static int
-xilinxfb_platform_remove(struct platform_device *pdev)
-{
-	return xilinxfb_release(&pdev->dev);
-}
-
-
-static struct platform_driver xilinxfb_platform_driver = {
-	.probe		= xilinxfb_platform_probe,
-	.remove		= xilinxfb_platform_remove,
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = DRIVER_NAME,
-	},
-};
-
-/* ---------------------------------------------------------------------
  * OF bus binding
  */
 
-#if defined(CONFIG_OF)
 static int __devinit
 xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct resource res;
 	const u32 *prop;
+	u32 *p;
+	u32 tft_access;
 	struct xilinxfb_platform_data pdata;
+	struct resource res;
 	int size, rc;
+	int start = 0, len = 0;
+	dcr_host_t dcr_host;
+	struct xilinxfb_drvdata *drvdata;
 
 	/* Copy with the default pdata (not a ptr reference!) */
 	pdata = xilinx_fb_default_pdata;
 
 	dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
 
-	rc = of_address_to_resource(op->node, 0, &res);
-	if (rc) {
-		dev_err(&op->dev, "invalid address\n");
-		return rc;
+	/*
+	 * To check whether the core is connected directly to DCR or PLB
+	 * interface and initialize the tft_access accordingly.
+	 */
+	p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL);
+
+	if (p)
+		tft_access = *p;
+	else
+		tft_access = 0;		/* For backward compatibility */
+
+	/*
+	 * Fill the resource structure if its direct PLB interface
+	 * otherwise fill the dcr_host structure.
+	 */
+	if (tft_access) {
+		rc = of_address_to_resource(op->node, 0, &res);
+		if (rc) {
+			dev_err(&op->dev, "invalid address\n");
+			return -ENODEV;
+		}
+
+	} else {
+		start = dcr_resource_start(op->node, 0);
+		len = dcr_resource_len(op->node, 0);
+		dcr_host = dcr_map(op->node, start, len);
+		if (!DCR_MAP_OK(dcr_host)) {
+			dev_err(&op->dev, "invalid address\n");
+			return -ENODEV;
+		}
 	}
 
 	prop = of_get_property(op->node, "phys-size", &size);
@@ -450,7 +467,26 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
 	if (of_find_property(op->node, "rotate-display", NULL))
 		pdata.rotate_screen = 1;
 
-	return xilinxfb_assign(&op->dev, res.start, &pdata);
+	/* Allocate the driver data region */
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata) {
+		dev_err(&op->dev, "Couldn't allocate device private record\n");
+		return -ENOMEM;
+	}
+	dev_set_drvdata(&op->dev, drvdata);
+
+	if (tft_access)
+		drvdata->flags |= PLB_ACCESS_FLAG;
+
+	/* Arguments are passed based on the interface */
+	if (drvdata->flags & PLB_ACCESS_FLAG) {
+		return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
+	} else {
+		drvdata->dcr_start = start;
+		drvdata->dcr_len = len;
+		drvdata->dcr_host = dcr_host;
+		return xilinxfb_assign(&op->dev, drvdata, 0, &pdata);
+	}
 }
 
 static int __devexit xilinxfb_of_remove(struct of_device *op)
@@ -460,7 +496,9 @@ static int __devexit xilinxfb_of_remove(struct of_device *op)
 
 /* Match table for of_platform binding */
 static struct of_device_id xilinxfb_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,xps-tft-1.00.a", },
 	{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
+	{ .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
@@ -476,22 +514,6 @@ static struct of_platform_driver xilinxfb_of_driver = {
 	},
 };
 
-/* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __init xilinxfb_of_register(void)
-{
-	pr_debug("xilinxfb: calling of_register_platform_driver()\n");
-	return of_register_platform_driver(&xilinxfb_of_driver);
-}
-
-static inline void __exit xilinxfb_of_unregister(void)
-{
-	of_unregister_platform_driver(&xilinxfb_of_driver);
-}
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
-static inline int __init xilinxfb_of_register(void) { return 0; }
-static inline void __exit xilinxfb_of_unregister(void) { }
-#endif /* CONFIG_OF */
 
 /* ---------------------------------------------------------------------
  * Module setup and teardown
@@ -500,28 +522,18 @@ static inline void __exit xilinxfb_of_unregister(void) { }
 static int __init
 xilinxfb_init(void)
 {
-	int rc;
-	rc = xilinxfb_of_register();
-	if (rc)
-		return rc;
-
-	rc = platform_driver_register(&xilinxfb_platform_driver);
-	if (rc)
-		xilinxfb_of_unregister();
-
-	return rc;
+	return of_register_platform_driver(&xilinxfb_of_driver);
 }
 
 static void __exit
 xilinxfb_cleanup(void)
 {
-	platform_driver_unregister(&xilinxfb_platform_driver);
-	xilinxfb_of_unregister();
+	of_unregister_platform_driver(&xilinxfb_of_driver);
 }
 
 module_init(xilinxfb_init);
 module_exit(xilinxfb_cleanup);
 
 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig
new file mode 100644
index 00000000000..f6542211db4
--- /dev/null
+++ b/drivers/vlynq/Kconfig
@@ -0,0 +1,20 @@
+menu "TI VLYNQ"
+
+config VLYNQ
+	bool "TI VLYNQ bus support"
+	depends on AR7 && EXPERIMENTAL
+	help
+	  Support for Texas Instruments(R) VLYNQ bus.
+	  The VLYNQ bus is a high-speed, serial and packetized
+	  data bus which allows external peripherals of a SoC
+	  to appear into the system's main memory.
+
+	  If unsure, say N
+
+config VLYNQ_DEBUG
+	bool "VLYNQ bus debug"
+	depends on VLYNQ && KERNEL_DEBUG
+	help
+	  Turn on VLYNQ bus debugging.
+
+endmenu
diff --git a/drivers/vlynq/Makefile b/drivers/vlynq/Makefile
new file mode 100644
index 00000000000..b3f61149b59
--- /dev/null
+++ b/drivers/vlynq/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for kernel vlynq drivers
+#
+
+obj-$(CONFIG_VLYNQ) += vlynq.o
diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c
new file mode 100644
index 00000000000..7335433b067
--- /dev/null
+++ b/drivers/vlynq/vlynq.c
@@ -0,0 +1,814 @@
+/*
+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * Parts of the VLYNQ specification can be found here:
+ * http://www.ti.com/litv/pdf/sprue36a
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/vlynq.h>
+
+#define VLYNQ_CTRL_PM_ENABLE		0x80000000
+#define VLYNQ_CTRL_CLOCK_INT		0x00008000
+#define VLYNQ_CTRL_CLOCK_DIV(x)		(((x) & 7) << 16)
+#define VLYNQ_CTRL_INT_LOCAL		0x00004000
+#define VLYNQ_CTRL_INT_ENABLE		0x00002000
+#define VLYNQ_CTRL_INT_VECTOR(x)	(((x) & 0x1f) << 8)
+#define VLYNQ_CTRL_INT2CFG		0x00000080
+#define VLYNQ_CTRL_RESET		0x00000001
+
+#define VLYNQ_CTRL_CLOCK_MASK          (0x7 << 16)
+
+#define VLYNQ_INT_OFFSET		0x00000014
+#define VLYNQ_REMOTE_OFFSET		0x00000080
+
+#define VLYNQ_STATUS_LINK		0x00000001
+#define VLYNQ_STATUS_LERROR		0x00000080
+#define VLYNQ_STATUS_RERROR		0x00000100
+
+#define VINT_ENABLE			0x00000100
+#define VINT_TYPE_EDGE			0x00000080
+#define VINT_LEVEL_LOW			0x00000040
+#define VINT_VECTOR(x)			((x) & 0x1f)
+#define VINT_OFFSET(irq)		(8 * ((irq) % 4))
+
+#define VLYNQ_AUTONEGO_V2		0x00010000
+
+struct vlynq_regs {
+	u32 revision;
+	u32 control;
+	u32 status;
+	u32 int_prio;
+	u32 int_status;
+	u32 int_pending;
+	u32 int_ptr;
+	u32 tx_offset;
+	struct vlynq_mapping rx_mapping[4];
+	u32 chip;
+	u32 autonego;
+	u32 unused[6];
+	u32 int_device[8];
+};
+
+#ifdef VLYNQ_DEBUG
+static void vlynq_dump_regs(struct vlynq_device *dev)
+{
+	int i;
+
+	printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
+			dev->local, dev->remote);
+	for (i = 0; i < 32; i++) {
+		printk(KERN_DEBUG "VLYNQ: local %d: %08x\n",
+			i + 1, ((u32 *)dev->local)[i]);
+		printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n",
+			i + 1, ((u32 *)dev->remote)[i]);
+	}
+}
+
+static void vlynq_dump_mem(u32 *base, int count)
+{
+	int i;
+
+	for (i = 0; i < (count + 3) / 4; i++) {
+		if (i % 4 == 0)
+			printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
+		printk(KERN_DEBUG " 0x%08x", *(base + i));
+	}
+	printk(KERN_DEBUG "\n");
+}
+#endif
+
+/* Check the VLYNQ link status with a given device */
+static int vlynq_linked(struct vlynq_device *dev)
+{
+	int i;
+
+	for (i = 0; i < 100; i++)
+		if (readl(&dev->local->status) & VLYNQ_STATUS_LINK)
+			return 1;
+		else
+			cpu_relax();
+
+	return 0;
+}
+
+static void vlynq_reset(struct vlynq_device *dev)
+{
+	writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
+			&dev->local->control);
+
+	/* Wait for the devices to finish resetting */
+	msleep(5);
+
+	/* Remove reset bit */
+	writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
+			&dev->local->control);
+
+	/* Give some time for the devices to settle */
+	msleep(5);
+}
+
+static void vlynq_irq_unmask(unsigned int irq)
+{
+	u32 val;
+	struct vlynq_device *dev = get_irq_chip_data(irq);
+	int virq;
+
+	BUG_ON(!dev);
+	virq = irq - dev->irq_start;
+	val = readl(&dev->remote->int_device[virq >> 2]);
+	val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
+	writel(val, &dev->remote->int_device[virq >> 2]);
+}
+
+static void vlynq_irq_mask(unsigned int irq)
+{
+	u32 val;
+	struct vlynq_device *dev = get_irq_chip_data(irq);
+	int virq;
+
+	BUG_ON(!dev);
+	virq = irq - dev->irq_start;
+	val = readl(&dev->remote->int_device[virq >> 2]);
+	val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
+	writel(val, &dev->remote->int_device[virq >> 2]);
+}
+
+static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
+{
+	u32 val;
+	struct vlynq_device *dev = get_irq_chip_data(irq);
+	int virq;
+
+	BUG_ON(!dev);
+	virq = irq - dev->irq_start;
+	val = readl(&dev->remote->int_device[virq >> 2]);
+	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_EDGE_BOTH:
+		val |= VINT_TYPE_EDGE << VINT_OFFSET(virq);
+		val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
+		val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
+		val |= VINT_LEVEL_LOW << VINT_OFFSET(virq);
+		break;
+	default:
+		return -EINVAL;
+	}
+	writel(val, &dev->remote->int_device[virq >> 2]);
+	return 0;
+}
+
+static void vlynq_local_ack(unsigned int irq)
+{
+	struct vlynq_device *dev = get_irq_chip_data(irq);
+
+	u32 status = readl(&dev->local->status);
+
+	pr_debug("%s: local status: 0x%08x\n",
+		       dev_name(&dev->dev), status);
+	writel(status, &dev->local->status);
+}
+
+static void vlynq_remote_ack(unsigned int irq)
+{
+	struct vlynq_device *dev = get_irq_chip_data(irq);
+
+	u32 status = readl(&dev->remote->status);
+
+	pr_debug("%s: remote status: 0x%08x\n",
+		       dev_name(&dev->dev), status);
+	writel(status, &dev->remote->status);
+}
+
+static irqreturn_t vlynq_irq(int irq, void *dev_id)
+{
+	struct vlynq_device *dev = dev_id;
+	u32 status;
+	int virq = 0;
+
+	status = readl(&dev->local->int_status);
+	writel(status, &dev->local->int_status);
+
+	if (unlikely(!status))
+		spurious_interrupt();
+
+	while (status) {
+		if (status & 1)
+			do_IRQ(dev->irq_start + virq);
+		status >>= 1;
+		virq++;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irq_chip vlynq_irq_chip = {
+	.name = "vlynq",
+	.unmask = vlynq_irq_unmask,
+	.mask = vlynq_irq_mask,
+	.set_type = vlynq_irq_type,
+};
+
+static struct irq_chip vlynq_local_chip = {
+	.name = "vlynq local error",
+	.unmask = vlynq_irq_unmask,
+	.mask = vlynq_irq_mask,
+	.ack = vlynq_local_ack,
+};
+
+static struct irq_chip vlynq_remote_chip = {
+	.name = "vlynq local error",
+	.unmask = vlynq_irq_unmask,
+	.mask = vlynq_irq_mask,
+	.ack = vlynq_remote_ack,
+};
+
+static int vlynq_setup_irq(struct vlynq_device *dev)
+{
+	u32 val;
+	int i, virq;
+
+	if (dev->local_irq == dev->remote_irq) {
+		printk(KERN_ERR
+		       "%s: local vlynq irq should be different from remote\n",
+		       dev_name(&dev->dev));
+		return -EINVAL;
+	}
+
+	/* Clear local and remote error bits */
+	writel(readl(&dev->local->status), &dev->local->status);
+	writel(readl(&dev->remote->status), &dev->remote->status);
+
+	/* Now setup interrupts */
+	val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
+	val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
+		VLYNQ_CTRL_INT2CFG;
+	val |= readl(&dev->local->control);
+	writel(VLYNQ_INT_OFFSET, &dev->local->int_ptr);
+	writel(val, &dev->local->control);
+
+	val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
+	val |= VLYNQ_CTRL_INT_ENABLE;
+	val |= readl(&dev->remote->control);
+	writel(VLYNQ_INT_OFFSET, &dev->remote->int_ptr);
+	writel(val, &dev->remote->int_ptr);
+	writel(val, &dev->remote->control);
+
+	for (i = dev->irq_start; i <= dev->irq_end; i++) {
+		virq = i - dev->irq_start;
+		if (virq == dev->local_irq) {
+			set_irq_chip_and_handler(i, &vlynq_local_chip,
+						 handle_level_irq);
+			set_irq_chip_data(i, dev);
+		} else if (virq == dev->remote_irq) {
+			set_irq_chip_and_handler(i, &vlynq_remote_chip,
+						 handle_level_irq);
+			set_irq_chip_data(i, dev);
+		} else {
+			set_irq_chip_and_handler(i, &vlynq_irq_chip,
+						 handle_simple_irq);
+			set_irq_chip_data(i, dev);
+			writel(0, &dev->remote->int_device[virq >> 2]);
+		}
+	}
+
+	if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
+		printk(KERN_ERR "%s: request_irq failed\n",
+					dev_name(&dev->dev));
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static void vlynq_device_release(struct device *dev)
+{
+	struct vlynq_device *vdev = to_vlynq_device(dev);
+	kfree(vdev);
+}
+
+static int vlynq_device_match(struct device *dev,
+			      struct device_driver *drv)
+{
+	struct vlynq_device *vdev = to_vlynq_device(dev);
+	struct vlynq_driver *vdrv = to_vlynq_driver(drv);
+	struct vlynq_device_id *ids = vdrv->id_table;
+
+	while (ids->id) {
+		if (ids->id == vdev->dev_id) {
+			vdev->divisor = ids->divisor;
+			vlynq_set_drvdata(vdev, ids);
+			printk(KERN_INFO "Driver found for VLYNQ "
+				"device: %08x\n", vdev->dev_id);
+			return 1;
+		}
+		printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver"
+			" for VLYNQ device: %08x\n", ids->id, vdev->dev_id);
+		ids++;
+	}
+	return 0;
+}
+
+static int vlynq_device_probe(struct device *dev)
+{
+	struct vlynq_device *vdev = to_vlynq_device(dev);
+	struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
+	struct vlynq_device_id *id = vlynq_get_drvdata(vdev);
+	int result = -ENODEV;
+
+	if (drv->probe)
+		result = drv->probe(vdev, id);
+	if (result)
+		put_device(dev);
+	return result;
+}
+
+static int vlynq_device_remove(struct device *dev)
+{
+	struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
+
+	if (drv->remove)
+		drv->remove(to_vlynq_device(dev));
+
+	return 0;
+}
+
+int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner)
+{
+	driver->driver.name = driver->name;
+	driver->driver.bus = &vlynq_bus_type;
+	return driver_register(&driver->driver);
+}
+EXPORT_SYMBOL(__vlynq_register_driver);
+
+void vlynq_unregister_driver(struct vlynq_driver *driver)
+{
+	driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL(vlynq_unregister_driver);
+
+/*
+ * A VLYNQ remote device can clock the VLYNQ bus master
+ * using a dedicated clock line. In that case, both the
+ * remove device and the bus master should have the same
+ * serial clock dividers configured. Iterate through the
+ * 8 possible dividers until we actually link with the
+ * device.
+ */
+static int __vlynq_try_remote(struct vlynq_device *dev)
+{
+	int i;
+
+	vlynq_reset(dev);
+	for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
+			i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
+		dev->dev_id ? i++ : i--) {
+
+		if (!vlynq_linked(dev))
+			break;
+
+		writel((readl(&dev->remote->control) &
+				~VLYNQ_CTRL_CLOCK_MASK) |
+				VLYNQ_CTRL_CLOCK_INT |
+				VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
+				&dev->remote->control);
+		writel((readl(&dev->local->control)
+				& ~(VLYNQ_CTRL_CLOCK_INT |
+				VLYNQ_CTRL_CLOCK_MASK)) |
+				VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
+				&dev->local->control);
+
+		if (vlynq_linked(dev)) {
+			printk(KERN_DEBUG
+				"%s: using remote clock divisor %d\n",
+				dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
+			dev->divisor = i;
+			return 0;
+		} else {
+			vlynq_reset(dev);
+		}
+	}
+
+	return -ENODEV;
+}
+
+/*
+ * A VLYNQ remote device can be clocked by the VLYNQ bus
+ * master using a dedicated clock line. In that case, only
+ * the bus master configures the serial clock divider.
+ * Iterate through the 8 possible dividers until we
+ * actually get a link with the device.
+ */
+static int __vlynq_try_local(struct vlynq_device *dev)
+{
+	int i;
+
+	vlynq_reset(dev);
+
+	for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
+			i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
+		dev->dev_id ? i++ : i--) {
+
+		writel((readl(&dev->local->control) &
+				~VLYNQ_CTRL_CLOCK_MASK) |
+				VLYNQ_CTRL_CLOCK_INT |
+				VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
+				&dev->local->control);
+
+		if (vlynq_linked(dev)) {
+			printk(KERN_DEBUG
+				"%s: using local clock divisor %d\n",
+				dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
+			dev->divisor = i;
+			return 0;
+		} else {
+			vlynq_reset(dev);
+		}
+	}
+
+	return -ENODEV;
+}
+
+/*
+ * When using external clocking method, serial clock
+ * is supplied by an external oscillator, therefore we
+ * should mask the local clock bit in the clock control
+ * register for both the bus master and the remote device.
+ */
+static int __vlynq_try_external(struct vlynq_device *dev)
+{
+	vlynq_reset(dev);
+	if (!vlynq_linked(dev))
+		return -ENODEV;
+
+	writel((readl(&dev->remote->control) &
+			~VLYNQ_CTRL_CLOCK_INT),
+			&dev->remote->control);
+
+	writel((readl(&dev->local->control) &
+			~VLYNQ_CTRL_CLOCK_INT),
+			&dev->local->control);
+
+	if (vlynq_linked(dev)) {
+		printk(KERN_DEBUG "%s: using external clock\n",
+			dev_name(&dev->dev));
+			dev->divisor = vlynq_div_external;
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int __vlynq_enable_device(struct vlynq_device *dev)
+{
+	int result;
+	struct plat_vlynq_ops *ops = dev->dev.platform_data;
+
+	result = ops->on(dev);
+	if (result)
+		return result;
+
+	switch (dev->divisor) {
+	case vlynq_div_external:
+	case vlynq_div_auto:
+		/* When the device is brought from reset it should have clock
+		 * generation negotiated by hardware.
+		 * Check which device is generating clocks and perform setup
+		 * accordingly */
+		if (vlynq_linked(dev) && readl(&dev->remote->control) &
+		   VLYNQ_CTRL_CLOCK_INT) {
+			if (!__vlynq_try_remote(dev) ||
+				!__vlynq_try_local(dev)  ||
+				!__vlynq_try_external(dev))
+				return 0;
+		} else {
+			if (!__vlynq_try_external(dev) ||
+				!__vlynq_try_local(dev)    ||
+				!__vlynq_try_remote(dev))
+				return 0;
+		}
+		break;
+	case vlynq_ldiv1:
+	case vlynq_ldiv2:
+	case vlynq_ldiv3:
+	case vlynq_ldiv4:
+	case vlynq_ldiv5:
+	case vlynq_ldiv6:
+	case vlynq_ldiv7:
+	case vlynq_ldiv8:
+		writel(VLYNQ_CTRL_CLOCK_INT |
+			VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+			vlynq_ldiv1), &dev->local->control);
+		writel(0, &dev->remote->control);
+		if (vlynq_linked(dev)) {
+			printk(KERN_DEBUG
+				"%s: using local clock divisor %d\n",
+				dev_name(&dev->dev),
+				dev->divisor - vlynq_ldiv1 + 1);
+			return 0;
+		}
+		break;
+	case vlynq_rdiv1:
+	case vlynq_rdiv2:
+	case vlynq_rdiv3:
+	case vlynq_rdiv4:
+	case vlynq_rdiv5:
+	case vlynq_rdiv6:
+	case vlynq_rdiv7:
+	case vlynq_rdiv8:
+		writel(0, &dev->local->control);
+		writel(VLYNQ_CTRL_CLOCK_INT |
+			VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+			vlynq_rdiv1), &dev->remote->control);
+		if (vlynq_linked(dev)) {
+			printk(KERN_DEBUG
+				"%s: using remote clock divisor %d\n",
+				dev_name(&dev->dev),
+				dev->divisor - vlynq_rdiv1 + 1);
+			return 0;
+		}
+		break;
+	}
+
+	ops->off(dev);
+	return -ENODEV;
+}
+
+int vlynq_enable_device(struct vlynq_device *dev)
+{
+	struct plat_vlynq_ops *ops = dev->dev.platform_data;
+	int result = -ENODEV;
+
+	result = __vlynq_enable_device(dev);
+	if (result)
+		return result;
+
+	result = vlynq_setup_irq(dev);
+	if (result)
+		ops->off(dev);
+
+	dev->enabled = !result;
+	return result;
+}
+EXPORT_SYMBOL(vlynq_enable_device);
+
+
+void vlynq_disable_device(struct vlynq_device *dev)
+{
+	struct plat_vlynq_ops *ops = dev->dev.platform_data;
+
+	dev->enabled = 0;
+	free_irq(dev->irq, dev);
+	ops->off(dev);
+}
+EXPORT_SYMBOL(vlynq_disable_device);
+
+int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
+			    struct vlynq_mapping *mapping)
+{
+	int i;
+
+	if (!dev->enabled)
+		return -ENXIO;
+
+	writel(tx_offset, &dev->local->tx_offset);
+	for (i = 0; i < 4; i++) {
+		writel(mapping[i].offset, &dev->local->rx_mapping[i].offset);
+		writel(mapping[i].size, &dev->local->rx_mapping[i].size);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(vlynq_set_local_mapping);
+
+int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
+			     struct vlynq_mapping *mapping)
+{
+	int i;
+
+	if (!dev->enabled)
+		return -ENXIO;
+
+	writel(tx_offset, &dev->remote->tx_offset);
+	for (i = 0; i < 4; i++) {
+		writel(mapping[i].offset, &dev->remote->rx_mapping[i].offset);
+		writel(mapping[i].size, &dev->remote->rx_mapping[i].size);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(vlynq_set_remote_mapping);
+
+int vlynq_set_local_irq(struct vlynq_device *dev, int virq)
+{
+	int irq = dev->irq_start + virq;
+	if (dev->enabled)
+		return -EBUSY;
+
+	if ((irq < dev->irq_start) || (irq > dev->irq_end))
+		return -EINVAL;
+
+	if (virq == dev->remote_irq)
+		return -EINVAL;
+
+	dev->local_irq = virq;
+
+	return 0;
+}
+EXPORT_SYMBOL(vlynq_set_local_irq);
+
+int vlynq_set_remote_irq(struct vlynq_device *dev, int virq)
+{
+	int irq = dev->irq_start + virq;
+	if (dev->enabled)
+		return -EBUSY;
+
+	if ((irq < dev->irq_start) || (irq > dev->irq_end))
+		return -EINVAL;
+
+	if (virq == dev->local_irq)
+		return -EINVAL;
+
+	dev->remote_irq = virq;
+
+	return 0;
+}
+EXPORT_SYMBOL(vlynq_set_remote_irq);
+
+static int vlynq_probe(struct platform_device *pdev)
+{
+	struct vlynq_device *dev;
+	struct resource *regs_res, *mem_res, *irq_res;
+	int len, result;
+
+	regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	if (!regs_res)
+		return -ENODEV;
+
+	mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
+	if (!mem_res)
+		return -ENODEV;
+
+	irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq");
+	if (!irq_res)
+		return -ENODEV;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		printk(KERN_ERR
+		       "vlynq: failed to allocate device structure\n");
+		return -ENOMEM;
+	}
+
+	dev->id = pdev->id;
+	dev->dev.bus = &vlynq_bus_type;
+	dev->dev.parent = &pdev->dev;
+	dev_set_name(&dev->dev, "vlynq%d", dev->id);
+	dev->dev.platform_data = pdev->dev.platform_data;
+	dev->dev.release = vlynq_device_release;
+
+	dev->regs_start = regs_res->start;
+	dev->regs_end = regs_res->end;
+	dev->mem_start = mem_res->start;
+	dev->mem_end = mem_res->end;
+
+	len = regs_res->end - regs_res->start;
+	if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) {
+		printk(KERN_ERR "%s: Can't request vlynq registers\n",
+		       dev_name(&dev->dev));
+		result = -ENXIO;
+		goto fail_request;
+	}
+
+	dev->local = ioremap(regs_res->start, len);
+	if (!dev->local) {
+		printk(KERN_ERR "%s: Can't remap vlynq registers\n",
+		       dev_name(&dev->dev));
+		result = -ENXIO;
+		goto fail_remap;
+	}
+
+	dev->remote = (struct vlynq_regs *)((void *)dev->local +
+					    VLYNQ_REMOTE_OFFSET);
+
+	dev->irq = platform_get_irq_byname(pdev, "irq");
+	dev->irq_start = irq_res->start;
+	dev->irq_end = irq_res->end;
+	dev->local_irq = dev->irq_end - dev->irq_start;
+	dev->remote_irq = dev->local_irq - 1;
+
+	if (device_register(&dev->dev))
+		goto fail_register;
+	platform_set_drvdata(pdev, dev);
+
+	printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
+	       dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
+	       (void *)dev->mem_start);
+
+	dev->dev_id = 0;
+	dev->divisor = vlynq_div_auto;
+	result = __vlynq_enable_device(dev);
+	if (result == 0) {
+		dev->dev_id = readl(&dev->remote->chip);
+		((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
+	}
+	if (dev->dev_id)
+		printk(KERN_INFO "Found a VLYNQ device: %08x\n", dev->dev_id);
+
+	return 0;
+
+fail_register:
+	iounmap(dev->local);
+fail_remap:
+fail_request:
+	release_mem_region(regs_res->start, len);
+	kfree(dev);
+	return result;
+}
+
+static int vlynq_remove(struct platform_device *pdev)
+{
+	struct vlynq_device *dev = platform_get_drvdata(pdev);
+
+	device_unregister(&dev->dev);
+	iounmap(dev->local);
+	release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start);
+
+	kfree(dev);
+
+	return 0;
+}
+
+static struct platform_driver vlynq_platform_driver = {
+	.driver.name = "vlynq",
+	.probe = vlynq_probe,
+	.remove = __devexit_p(vlynq_remove),
+};
+
+struct bus_type vlynq_bus_type = {
+	.name = "vlynq",
+	.match = vlynq_device_match,
+	.probe = vlynq_device_probe,
+	.remove = vlynq_device_remove,
+};
+EXPORT_SYMBOL(vlynq_bus_type);
+
+static int __devinit vlynq_init(void)
+{
+	int res = 0;
+
+	res = bus_register(&vlynq_bus_type);
+	if (res)
+		goto fail_bus;
+
+	res = platform_driver_register(&vlynq_platform_driver);
+	if (res)
+		goto fail_platform;
+
+	return 0;
+
+fail_platform:
+	bus_unregister(&vlynq_bus_type);
+fail_bus:
+	return res;
+}
+
+static void __devexit vlynq_exit(void)
+{
+	platform_driver_unregister(&vlynq_platform_driver);
+	bus_unregister(&vlynq_bus_type);
+}
+
+module_init(vlynq_init);
+module_exit(vlynq_exit);
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 9adbb4f9047..fd2c7bd9dfb 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -8,7 +8,7 @@ menuconfig W1
 	  If you want W1 support, you should say Y here.
 
 	  This W1 support can also be built as a module.  If so, the module
-	  will be called wire.ko.
+	  will be called wire.
 
 if W1
 
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 96d2f8e4c27..3195fb8b7d9 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -12,7 +12,7 @@ config W1_MASTER_MATROX
 	  using Matrox's G400 GPIO pins.
 
 	  This support is also available as a module.  If so, the module
-	  will be called matrox_w1.ko.
+	  will be called matrox_w1.
 
 config W1_MASTER_DS2490
 	tristate "DS2490 USB <-> W1 transport layer for 1-wire"
@@ -22,7 +22,7 @@ config W1_MASTER_DS2490
 	  for example DS9490*.
 
   	  This support is also available as a module.  If so, the module
-	  will be called ds2490.ko.
+	  will be called ds2490.
 
 config W1_MASTER_DS2482
 	tristate "Maxim DS2482 I2C to 1-Wire bridge"
@@ -56,7 +56,7 @@ config W1_MASTER_GPIO
 	  GPIO pins. This driver uses the GPIO API to control the wire.
 
 	  This support is also available as a module.  If so, the module
-	  will be called w1-gpio.ko.
+	  will be called w1-gpio.
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5eb8f21da82..b166f2852a6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -231,14 +231,14 @@ config DAVINCI_WATCHDOG
 	  NOTE: once enabled, this timer cannot be disabled.
 	  Say N if you are unsure.
 
-config ORION5X_WATCHDOG
-	tristate "Orion5x watchdog"
-	depends on ARCH_ORION5X
+config ORION_WATCHDOG
+	tristate "Orion watchdog"
+	depends on ARCH_ORION5X || ARCH_KIRKWOOD
 	help
 	  Say Y here if to include support for the watchdog timer
-	  in the Orion5x ARM SoCs.
+	  in the Marvell Orion5x and Kirkwood ARM SoCs.
 	  To compile this driver as a module, choose M here: the
-	  module will be called orion5x_wdt.
+	  module will be called orion_wdt.
 
 # AVR32 Architecture
 
@@ -531,7 +531,7 @@ config SBC8360_WDT
 	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called sbc8360.ko.
+	  module will be called sbc8360.
 
 	  Most people will say N.
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 7f8c56b14f5..c3afa14d5be 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
 obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
 obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
 obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
-obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
+obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
index 96eb2cbe587..0c905967669 100644
--- a/drivers/watchdog/iop_wdt.c
+++ b/drivers/watchdog/iop_wdt.c
@@ -192,7 +192,7 @@ static int iop_wdt_release(struct inode *inode, struct file *file)
 		if (test_bit(WDT_ENABLED, &wdt_status))
 			state = wdt_disable();
 
-	/* if the timer is not disbaled reload and notify that we are still
+	/* if the timer is not disabled reload and notify that we are still
 	 * going down
 	 */
 	if (state != 0) {
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion_wdt.c
index 2cde568e4fb..2d9fb96a9ee 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -1,7 +1,7 @@
 /*
- * drivers/watchdog/orion5x_wdt.c
+ * drivers/watchdog/orion_wdt.c
  *
- * Watchdog driver for Orion5x processors
+ * Watchdog driver for Orion/Kirkwood processors
  *
  * Author: Sylver Bruneau <sylver.bruneau@googlemail.com>
  *
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <mach/bridge-regs.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
 
 /*
  * Watchdog timer block registers.
@@ -43,7 +43,7 @@ static unsigned int wdt_tclk;
 static unsigned long wdt_status;
 static spinlock_t wdt_lock;
 
-static void orion5x_wdt_ping(void)
+static void orion_wdt_ping(void)
 {
 	spin_lock(&wdt_lock);
 
@@ -53,7 +53,7 @@ static void orion5x_wdt_ping(void)
 	spin_unlock(&wdt_lock);
 }
 
-static void orion5x_wdt_enable(void)
+static void orion_wdt_enable(void)
 {
 	u32 reg;
 
@@ -73,23 +73,23 @@ static void orion5x_wdt_enable(void)
 	writel(reg, TIMER_CTRL);
 
 	/* Enable reset on watchdog */
-	reg = readl(CPU_RESET_MASK);
-	reg |= WDT_RESET;
-	writel(reg, CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
+	reg |= WDT_RESET_OUT_EN;
+	writel(reg, RSTOUTn_MASK);
 
 	spin_unlock(&wdt_lock);
 }
 
-static void orion5x_wdt_disable(void)
+static void orion_wdt_disable(void)
 {
 	u32 reg;
 
 	spin_lock(&wdt_lock);
 
 	/* Disable reset on watchdog */
-	reg = readl(CPU_RESET_MASK);
-	reg &= ~WDT_RESET;
-	writel(reg, CPU_RESET_MASK);
+	reg = readl(RSTOUTn_MASK);
+	reg &= ~WDT_RESET_OUT_EN;
+	writel(reg, RSTOUTn_MASK);
 
 	/* Disable watchdog timer */
 	reg = readl(TIMER_CTRL);
@@ -99,7 +99,7 @@ static void orion5x_wdt_disable(void)
 	spin_unlock(&wdt_lock);
 }
 
-static int orion5x_wdt_get_timeleft(int *time_left)
+static int orion_wdt_get_timeleft(int *time_left)
 {
 	spin_lock(&wdt_lock);
 	*time_left = readl(WDT_VAL) / wdt_tclk;
@@ -107,16 +107,16 @@ static int orion5x_wdt_get_timeleft(int *time_left)
 	return 0;
 }
 
-static int orion5x_wdt_open(struct inode *inode, struct file *file)
+static int orion_wdt_open(struct inode *inode, struct file *file)
 {
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-	orion5x_wdt_enable();
+	orion_wdt_enable();
 	return nonseekable_open(inode, file);
 }
 
-static ssize_t orion5x_wdt_write(struct file *file, const char *data,
+static ssize_t orion_wdt_write(struct file *file, const char *data,
 					size_t len, loff_t *ppos)
 {
 	if (len) {
@@ -133,18 +133,18 @@ static ssize_t orion5x_wdt_write(struct file *file, const char *data,
 					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
 			}
 		}
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 	}
 	return len;
 }
 
-static int orion5x_wdt_settimeout(int new_time)
+static int orion_wdt_settimeout(int new_time)
 {
 	if ((new_time <= 0) || (new_time > wdt_max_duration))
 		return -EINVAL;
 
 	/* Set new watchdog time to be used when
-	 * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */
+	 * orion_wdt_enable() or orion_wdt_ping() is called. */
 	heartbeat = new_time;
 	return 0;
 }
@@ -152,10 +152,10 @@ static int orion5x_wdt_settimeout(int new_time)
 static const struct watchdog_info ident = {
 	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
 			  WDIOF_KEEPALIVEPING,
-	.identity	= "Orion5x Watchdog",
+	.identity	= "Orion Watchdog",
 };
 
-static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
+static long orion_wdt_ioctl(struct file *file, unsigned int cmd,
 				unsigned long arg)
 {
 	int ret = -ENOTTY;
@@ -173,7 +173,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_KEEPALIVE:
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 		ret = 0;
 		break;
 
@@ -182,11 +182,11 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		if (ret)
 			break;
 
-		if (orion5x_wdt_settimeout(time)) {
+		if (orion_wdt_settimeout(time)) {
 			ret = -EINVAL;
 			break;
 		}
-		orion5x_wdt_ping();
+		orion_wdt_ping();
 		/* Fall through */
 
 	case WDIOC_GETTIMEOUT:
@@ -194,7 +194,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_GETTIMELEFT:
-		if (orion5x_wdt_get_timeleft(&time)) {
+		if (orion_wdt_get_timeleft(&time)) {
 			ret = -EINVAL;
 			break;
 		}
@@ -204,10 +204,10 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
 	return ret;
 }
 
-static int orion5x_wdt_release(struct inode *inode, struct file *file)
+static int orion_wdt_release(struct inode *inode, struct file *file)
 {
 	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 	else
 		printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
 					"timer will not stop\n");
@@ -218,98 +218,98 @@ static int orion5x_wdt_release(struct inode *inode, struct file *file)
 }
 
 
-static const struct file_operations orion5x_wdt_fops = {
+static const struct file_operations orion_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.write		= orion5x_wdt_write,
-	.unlocked_ioctl	= orion5x_wdt_ioctl,
-	.open		= orion5x_wdt_open,
-	.release	= orion5x_wdt_release,
+	.write		= orion_wdt_write,
+	.unlocked_ioctl	= orion_wdt_ioctl,
+	.open		= orion_wdt_open,
+	.release	= orion_wdt_release,
 };
 
-static struct miscdevice orion5x_wdt_miscdev = {
+static struct miscdevice orion_wdt_miscdev = {
 	.minor		= WATCHDOG_MINOR,
 	.name		= "watchdog",
-	.fops		= &orion5x_wdt_fops,
+	.fops		= &orion_wdt_fops,
 };
 
-static int __devinit orion5x_wdt_probe(struct platform_device *pdev)
+static int __devinit orion_wdt_probe(struct platform_device *pdev)
 {
-	struct orion5x_wdt_platform_data *pdata = pdev->dev.platform_data;
+	struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
 	int ret;
 
 	if (pdata) {
 		wdt_tclk = pdata->tclk;
 	} else {
-		printk(KERN_ERR "Orion5x Watchdog misses platform data\n");
+		printk(KERN_ERR "Orion Watchdog misses platform data\n");
 		return -ENODEV;
 	}
 
-	if (orion5x_wdt_miscdev.parent)
+	if (orion_wdt_miscdev.parent)
 		return -EBUSY;
-	orion5x_wdt_miscdev.parent = &pdev->dev;
+	orion_wdt_miscdev.parent = &pdev->dev;
 
 	wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
-	if (orion5x_wdt_settimeout(heartbeat))
+	if (orion_wdt_settimeout(heartbeat))
 		heartbeat = wdt_max_duration;
 
-	ret = misc_register(&orion5x_wdt_miscdev);
+	ret = misc_register(&orion_wdt_miscdev);
 	if (ret)
 		return ret;
 
-	printk(KERN_INFO "Orion5x Watchdog Timer: Initial timeout %d sec%s\n",
+	printk(KERN_INFO "Orion Watchdog Timer: Initial timeout %d sec%s\n",
 				heartbeat, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
-static int __devexit orion5x_wdt_remove(struct platform_device *pdev)
+static int __devexit orion_wdt_remove(struct platform_device *pdev)
 {
 	int ret;
 
 	if (test_bit(WDT_IN_USE, &wdt_status)) {
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 		clear_bit(WDT_IN_USE, &wdt_status);
 	}
 
-	ret = misc_deregister(&orion5x_wdt_miscdev);
+	ret = misc_deregister(&orion_wdt_miscdev);
 	if (!ret)
-		orion5x_wdt_miscdev.parent = NULL;
+		orion_wdt_miscdev.parent = NULL;
 
 	return ret;
 }
 
-static void orion5x_wdt_shutdown(struct platform_device *pdev)
+static void orion_wdt_shutdown(struct platform_device *pdev)
 {
 	if (test_bit(WDT_IN_USE, &wdt_status))
-		orion5x_wdt_disable();
+		orion_wdt_disable();
 }
 
-static struct platform_driver orion5x_wdt_driver = {
-	.probe		= orion5x_wdt_probe,
-	.remove		= __devexit_p(orion5x_wdt_remove),
-	.shutdown	= orion5x_wdt_shutdown,
+static struct platform_driver orion_wdt_driver = {
+	.probe		= orion_wdt_probe,
+	.remove		= __devexit_p(orion_wdt_remove),
+	.shutdown	= orion_wdt_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "orion5x_wdt",
+		.name	= "orion_wdt",
 	},
 };
 
-static int __init orion5x_wdt_init(void)
+static int __init orion_wdt_init(void)
 {
 	spin_lock_init(&wdt_lock);
-	return platform_driver_register(&orion5x_wdt_driver);
+	return platform_driver_register(&orion_wdt_driver);
 }
 
-static void __exit orion5x_wdt_exit(void)
+static void __exit orion_wdt_exit(void)
 {
-	platform_driver_unregister(&orion5x_wdt_driver);
+	platform_driver_unregister(&orion_wdt_driver);
 }
 
-module_init(orion5x_wdt_init);
-module_exit(orion5x_wdt_exit);
+module_init(orion_wdt_init);
+module_exit(orion_wdt_exit);
 
 MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>");
-MODULE_DESCRIPTION("Orion5x Processor Watchdog");
+MODULE_DESCRIPTION("Orion Processor Watchdog");
 
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
diff --git a/firmware/Makefile b/firmware/Makefile
index 25200d106ee..621de8e952f 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
 			     bnx2/bnx2-rv2p-09-4.6.15.fw \
 			     bnx2/bnx2-mips-06-4.6.16.fw \
@@ -40,13 +41,15 @@ fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
 fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
 				   cxgb3/t3c_psram-1.1.0.bin \
-				   cxgb3/t3fw-7.1.0.bin
+				   cxgb3/t3fw-7.4.0.bin
 fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
 fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
 fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
 			     e100/d102e_ucode.bin
 fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
 fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis
+fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
+fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
 fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
 fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
 				      advansys/3550.bin advansys/38C0800.bin
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 4c52984a831..0f5649a08c0 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -412,7 +412,7 @@ Driver: cxgb3 - Chelsio Terminator 3 1G/10G Ethernet adapter
 
 File: cxgb3/t3b_psram-1.1.0.bin.ihex
 File: cxgb3/t3c_psram-1.1.0.bin.ihex
-file: cxgb3/t3fw-7.1.0.bin.ihex
+file: cxgb3/t3fw-7.4.0.bin.ihex
 
 License: GPLv2 or OpenIB.org BSD license, no source visible
 
@@ -586,6 +586,26 @@ Originally developed by the pcmcia-cs project
 
 --------------------------------------------------------------------------
 
+Driver: PCMCIA_3C589 - 3Com PCMCIA adapter
+
+File: cis/3CXEM556.cis
+
+Licence: GPL
+
+Originally developed by the pcmcia-cs project
+
+--------------------------------------------------------------------------
+
+Driver: PCMCIA_3C574 - 3Com PCMCIA adapter
+
+File: cis/3CCFEM556.cis
+
+Licence: GPL
+
+Originally developed by the pcmcia-cs project
+
+--------------------------------------------------------------------------
+
 Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA
 
 File: ositech/Xilinx7OD.bin
@@ -618,6 +638,26 @@ Found in hex form in kernel source.
 
 --------------------------------------------------------------------------
 
+Driver: bnx2x: Broadcom Everest
+
+File: bnx2x-e1-4.8.53.0.fw.ihex
+File: bnx2x-e1h-4.8.53.0.fw.ihex
+
+License:
+  Copyright (c) 2007-2009 Broadcom Corporation
+
+  This file contains firmware data derived from proprietary unpublished
+  source code, Copyright (c) 2007-2009 Broadcom Corporation.
+
+  Permission is hereby granted for the distribution of this firmware data
+  in hexadecimal or equivalent format, provided this copyright notice is
+  accompanying it.
+
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
+
 Driver: BNX2 - Broadcom NetXtremeII
 
 File: bnx2/bnx2-mips-06-4.6.16.fw
diff --git a/firmware/bnx2x-e1-4.8.53.0.fw.ihex b/firmware/bnx2x-e1-4.8.53.0.fw.ihex
new file mode 100644
index 00000000000..f1edb1e7ad1
--- /dev/null
+++ b/firmware/bnx2x-e1-4.8.53.0.fw.ihex
@@ -0,0 +1,10364 @@
+:10000000000028600000006000000630000028C8E2
+:100010000000160800002F000000009400004510AA
+:10002000000073C8000045A8000000C40000B978B3
+:100030000000A4680000BA400000007400015EB037
+:100040000000559000015F28000000B80001B4C016
+:100050000000D1F80001B580000000040002878094
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000060400CC0000000418
+:10010000020400DC00100000020400E012140000F1
+:10011000020400E422140000020400E8321400008B
+:10012000060400EC000000040104012400000000AB
+:1001300001040128000000000104012C000000005F
+:10014000010401300000000002040004000000FF70
+:1001500002040008000000FF0204000C000000FF81
+:1001600002040010000000FF02040014000000FF61
+:1001700002040018000000FF0204001C000000FF41
+:1001800002040020000000FF020400240000003EE2
+:1001900002040028000000000204002C0000003FC0
+:1001A000020400300000003F020400340000003F61
+:1001B00002040038000000000204003C0000003F80
+:1001C000020400400000003F020400440000003F21
+:1001D00002042008000004110204200C00000400A6
+:1001E000020420100000040402042014000004197A
+:1001F0000204201C0000FFFF020420200000FFFF7B
+:10020000020420240000FFFF020420280000FFFF5A
+:1002100006042038000000020204204000000034E0
+:100220000204204400000035060420480000007C41
+:100230000204223807FFFFFF0204223C0000003FB7
+:100240000204224007FFFFFF020422440000000FC7
+:1002500001042248000000000104224C00000000BC
+:10026000010422500000000001042254000000009C
+:1002700001042258000000000104225C000000007C
+:10028000010422600000000001042264000000005C
+:1002900001042268000000000104226C000000003C
+:1002A000010422700000000001042274000000001C
+:1002B00001042278000000000104227C00000000FC
+:1002C000020424BC000000010C042000000003E82C
+:1002D0000A042000000000010B0420000000000AB6
+:1002E0000205004400000020020500480000003222
+:1002F000020500900215002002050094021500205E
+:1003000002050098000000300205009C0810000063
+:10031000020500A000000033020500A40000003028
+:10032000020500A800000031020500AC0000000238
+:10033000020500B000000005020500B40000000640
+:10034000020500B800000002020500BC0000000227
+:10035000020500C000000000020500C40000000506
+:10036000020500C800000002020500CC00000002E7
+:10037000020500D000000002020500D400000001C8
+:1003800002050114000000010205011C000000012B
+:100390000205012000000002020502040000000125
+:1003A0000205020C0000004002050210000000409F
+:1003B0000205021C000000200205022000000013BC
+:1003C0000205022400000020060502400000000A89
+:1003D0000405028000200000020500500000000714
+:1003E0000205005400000007020500580000000844
+:1003F0000205005C00000008060500600000000423
+:10040000020500D800000006020500E00000000D13
+:10041000020500E40000002D020500E800000007CE
+:10042000020500EC00000027020500F000000007B4
+:10043000020500F400000027020500F80000000794
+:10044000020500FC00000027020500040000000176
+:1004500002050008000000010205000C0000000178
+:100460000205001000000001020500140000000158
+:1004700002050018000000010205001C0000000138
+:100480000205002000000001020500240000000118
+:1004900002050028000000010205002C00000001F8
+:1004A00002050030000000010205003400000001D8
+:1004B00002050038000000010205003C00000001B8
+:1004C00002050040000000010406100002000020A8
+:1004D000020600DC00000001010600D80000000058
+:1004E0000406020000030220020600DC00000000F7
+:1004F00002060068000000B802060078000001143F
+:10050000010600B800000000010600C8000000005D
+:100510000206006C000000B80206007C0000011416
+:10052000010600BC00000000010600CC0000000035
+:100530000718040000930000081807600014022345
+:10054000071C0000324F0000071C800033250C946C
+:10055000071D00000E4D195E081D1E005C4002259F
+:100560000118000000000000011800040000000055
+:1005700001180008000000000118000C0000000035
+:100580000118001000000000011800140000000015
+:1005900002180020000000010218002400000002E0
+:1005A00002180028000000030218002C00000000C0
+:1005B000021800300000000402180034000000019E
+:1005C00002180038000000000218003C0000000182
+:1005D000021800400000000402180044000000005F
+:1005E00002180048000000010218004C000000033F
+:1005F0000218005000000000021800540000000122
+:1006000002180058000000040218005C00000000FE
+:1006100002180060000000010218006400000003DE
+:1006200002180068000000000218006C00000001C1
+:10063000021800700000000402180074000000009E
+:1006400002180078000000040218007C000000037B
+:100650000618008000000002021800A400003FFFFE
+:10066000021800A8000003FF021802240000000086
+:1006700002180234000000000218024C00000000C2
+:10068000021802E4000000FF061810000000040039
+:10069000021B8BC000000001021B80000000003420
+:1006A000021B804000000018021B80800000000C2C
+:1006B000021B80C0000000200C1B83000007A1204B
+:1006C0000A1B8300000001380B1B83000000138805
+:1006D000021B83C0000001F4061A2000000000B2D3
+:1006E000061A23C8000000C1041A26CC0001022704
+:1006F000061A1020000000C8061A100000000002B0
+:10070000061A1C1800000004061A1C100000000243
+:10071000061A080000000002061A0808000000027D
+:10072000061A081000000004041A1FB00004022872
+:10073000041A4CB00008022C061A22C8000000203F
+:10074000061A40000000016C021A4B600000000015
+:10075000061A14000000000A061A145000000006D1
+:10076000061A150000000002041A150800050234DC
+:10077000061A151C00000007061A1570000000126A
+:10078000061A09C00000004C061A0800000000020A
+:10079000061A08200000000E041A1FB000020239D9
+:1007A000061A290800000002061A2348000000204B
+:1007B000061A45B00000016C021A4B6400000000EC
+:1007C000061A14280000000A061A14680000000621
+:1007D000061A153800000002041A15400005023BF5
+:1007E000061A155400000007061A15B8000000127A
+:1007F000061A0AF00000004C061A08080000000261
+:10080000061A08580000000E041A1FB80002024021
+:10081000061A2910000000020200A2800000000158
+:100820000200A294071D29110200A29800000000F6
+:100830000200A29C009C04240200A2A00000000070
+:100840000200A2A4000002090200A4FCFF000000B4
+:10085000020100B400000001020100B80000000124
+:10086000020100DC000000010201010000000001A3
+:1008700002010104000000010201007C00300000C0
+:1008800002010084000000280201008C000000002A
+:1008900002010130000000040201025C00000001BE
+:1008A000020103280000000002010554000000308E
+:1008B000020100C400000001020100CC00000001A0
+:1008C000020100F800000001020100F00000000138
+:1008D00002010080003000000201008800000028B2
+:1008E0000201009000000000020101340000000439
+:1008F000020102DC000000010201032C00000000E4
+:100900000201056400000030020100C8000000017F
+:10091000020100D000000001020100FC0000000103
+:10092000020100F400000001020C10000000002091
+:10093000020C200800000A11020C200C00000A0022
+:10094000020C201000000A04020C201C0000FFFF13
+:10095000020C20200000FFFF020C20240000FFFFFB
+:10096000020C20280000FFFF020C2038000000C607
+:10097000020C203C00000000020C2040000000346B
+:10098000020C204400000035060C20480000001C2A
+:10099000020C20B800000001060C20BC0000005F23
+:1009A000020C223807FFFFFF020C223C0000003F30
+:1009B000020C224007FFFFFF020C22440000000F40
+:1009C000010C224800000000010C224C0000000035
+:1009D000010C225000000000010C22540000000015
+:1009E000010C225800000000010C225C00000000F5
+:1009F000010C226000000000010C226400000000D5
+:100A0000010C226800000000010C226C00000000B4
+:100A1000010C227000000000010C22740000000094
+:100A2000010C227800000000010C227C0000000074
+:100A3000020C24BC000000010C0C2000000003E8A4
+:100A40000A0C2000000000010B0C20000000000A2E
+:100A5000020C400800000A11020C400C00000A00C1
+:100A6000020C401000000A04020C401400000A218D
+:100A7000020C401C0000FFFF020C40200000FFFFA2
+:100A8000020C40240000FFFF020C40280000FFFF82
+:100A9000020C403800000046020C403C00000005FB
+:100AA000020C404000000034020C404400000035BD
+:100AB000060C40480000005C020C41B80000000138
+:100AC000060C41BC0000001F020C423807FFFFFF6C
+:100AD000020C423C0000003F020C424007FFFFFFB7
+:100AE000020C42440000000F010C424800000000CC
+:100AF000010C424C00000000010C425000000000BC
+:100B0000010C425400000000010C4258000000009B
+:100B1000010C425C00000000010C4260000000007B
+:100B2000010C426400000000010C4268000000005B
+:100B3000010C426C00000000010C4270000000003B
+:100B4000010C427400000000010C4278000000001B
+:100B5000010C427C00000000010C428000000000FB
+:100B6000020C44C0000000010C0C4000000003E82F
+:100B70000A0C4000000000010B0C40000000000ABD
+:100B8000020D004400000032020D008C021500200E
+:100B9000020D009002150020020D009408100000C4
+:100BA000020D009800000033020D009C00000002BE
+:100BB000020D00A000000000020D00A400000005CE
+:100BC000020D00A800000005060D00AC00000002A8
+:100BD000020D00B400000002020D00B80000000386
+:100BE000020D00BC00000002020D00C00000000168
+:100BF000020D00C800000002020D00CC000000023F
+:100C0000020D010800000001020D015C000000015E
+:100C1000020D016400000001020D016800000002E5
+:100C2000020D020400000001020D020C0000002071
+:100C3000020D021000000040020D021400000040EE
+:100C4000020D022000000003020D02240000001823
+:100C5000060D028000000012040D03000024024271
+:100C6000020D004C00000001020D005000000002C7
+:100C7000020D005400000008020D0058000000089A
+:100C8000060D005C00000004020D00C4000000041A
+:100C9000020D011400000009020D011800000029D6
+:100CA000020D011C0000000A020D01200000002AB4
+:100CB000020D012400000007020D0128000000279A
+:100CC000020D012C00000007020D0130000000277A
+:100CD000020D01340000000C020D01380000002C50
+:100CE000020D013C0000000C020D01400000002C30
+:100CF000020D01440000000C020D01480000002C10
+:100D0000020D000400000001020D000800000001B7
+:100D1000020D000C00000001020D00100000000197
+:100D2000020D001400000001020D00180000000177
+:100D3000020D001C00000001020D00200000000157
+:100D4000020D002400000001020D00280000000137
+:100D5000020D002C00000001020D00300000000117
+:100D6000020D003400000001020D003800000001F7
+:100D7000020D003C00000001020E004C0000003299
+:100D8000020E009402150020020E009802150020A9
+:100D9000020E009C00000030020E00A008100000AF
+:100DA000020E00A400000033020E00A80000003074
+:100DB000020E00AC00000031020E00B00000000284
+:100DC000020E00B400000004020E00B80000000093
+:100DD000020E00BC00000002020E00C00000000273
+:100DE000020E00C400000000020E00C80000000255
+:100DF000020E00CC00000007020E00D0000000022E
+:100E0000020E00D400000002020E00D80000000113
+:100E1000020E00E400000001020E01440000000187
+:100E2000020E014C00000001020E01500000000201
+:100E3000020E020400000001020E020C000000403D
+:100E4000020E021000000040020E021C000000040E
+:100E5000020E022000000020020E02240000000EFC
+:100E6000020E02280000001B060E03000000001204
+:100E7000040E0280001B0266020E005400000010E7
+:100E8000020E005800000007020E005C0000000F78
+:100E9000020E006000000010060E00640000000456
+:100EA000020E00DC00000003020E01100000000F23
+:100EB000020E01140000002F020E01180000000EA7
+:100EC000020E011C0000002E020E000400000001B2
+:100ED000020E000800000001020E000C00000001DC
+:100EE000020E001000000001020E001400000001BC
+:100EF000020E001800000001020E001C000000019C
+:100F0000020E002000000001020E0024000000017B
+:100F1000020E002800000001020E002C000000015B
+:100F2000020E003000000001020E0034000000013B
+:100F3000020E003800000001020E003C000000011B
+:100F4000020E004000000001020E004400000001FB
+:100F50000730040000C30000083007680013028156
+:100F600007340000314C00000734800035EF0C548A
+:100F700007350000361319D00735800007112755B3
+:100F800008358EE04E24028301300000000000008E
+:100F900001300004000000000130000800000000E3
+:100FA0000130000C000000000130001000000000C3
+:100FB0000130001400000000023000200000000199
+:100FC000023000240000000202300028000000036C
+:100FD0000230002C0000000002300030000000044D
+:100FE0000230003400000001023000380000000030
+:100FF0000230003C0000000102300040000000040C
+:1010000002300044000000000230004800000001EF
+:101010000230004C000000030230005000000000CD
+:1010200002300054000000010230005800000004AB
+:101030000230005C0000000002300060000000018F
+:10104000023000640000000302300068000000006D
+:101050000230006C0000000102300070000000044B
+:10106000023000740000000002300078000000042C
+:101070000230007C00000003063000800000000207
+:10108000023000A400003FFF023000A8000003FF70
+:101090000230022400000000023002340000000090
+:1010A0000230024C00000000023002E40000FFFFAA
+:1010B000063020000000080002338BC00000000151
+:1010C000023380000000001A023380400000004E0E
+:1010D0000233808000000010023380C00000002036
+:1010E0000C3383000007A1200A338300000001387D
+:1010F0000B33830000001388023383C0000001F427
+:101100000C3383801DCD65000A3383800004C4B492
+:101110000B338380004C4B4006325000000000C26D
+:1011200006321020000000C8063210000000000245
+:101130000632464000000040063257F0000000042E
+:10114000063257D800000005043257EC0001028532
+:1011500006321C60000000200432283000020286A3
+:10116000023308000100000004330C000010028864
+:10117000023308000000000004330C400010029805
+:1011800006321400000000A0063219000000001012
+:10119000063219800000003006324740000000B4DB
+:1011A00002321D900000000006321B4000000004C7
+:1011B00006321B6000000020063253180000009821
+:1011C00006321680000000A0063219400000001010
+:1011D00006321A400000003006324A10000000B407
+:1011E00002321D940000000006321B500000000473
+:1011F00006321BE0000000200632557800000098FF
+:10120000072004000071000008200780001002A8D9
+:1012100007240000322900000724800023630C8B80
+:101220000824C930654002AA012000000000000027
+:101230000120000400000000012000080000000060
+:101240000120000C00000000012000100000000040
+:101250000120001400000000022000200000000116
+:1012600002200024000000020220002800000003E9
+:101270000220002C000000000220003000000004CA
+:1012800002200034000000010220003800000000AD
+:101290000220003C00000001022000400000000489
+:1012A000022000440000000002200048000000016D
+:1012B0000220004C0000000302200050000000004B
+:1012C0000220005400000001022000580000000429
+:1012D0000220005C0000000002200060000000010D
+:1012E00002200064000000030220006800000000EB
+:1012F0000220006C000000010220007000000004C9
+:1013000002200074000000000220007800000004A9
+:101310000220007C00000003062000800000000284
+:10132000022000A400003FFF022000A8000003FFED
+:10133000022002240000000002200234000000000D
+:101340000220024C00000000022002E40000FFFF27
+:10135000062020000000080002238BC000000001CE
+:1013600002238000000000100223804000000012D1
+:101370000223808000000030022380C00000000EA5
+:10138000022383C0000001F4062250000000004246
+:1013900006221020000000C80622100000000002F3
+:1013A00006222000000000C00622307000000080ED
+:1013B0000622428000000004062225C000000240F0
+:1013C00004222EC8000802AC02230800013FFFFFE0
+:1013D00004230C00001002B40223080000000000E7
+:1013E00004230C40001002C406221400000000A0D8
+:1013F00006221900000000100622198000000030AB
+:101400000222511800000000062223000000000EF6
+:1014100006223040000000060622241000000030A2
+:1014200006221680000000A00622194000000010CD
+:1014300006221A40000000300222511C0000000069
+:10144000062223380000000E062230580000000655
+:10145000062224D0000000300216100000000020F8
+:1014600002170008000000020217002C0000000311
+:101470000217003C000000040217004400000008AE
+:1014800002170048000000020217004C0000009004
+:1014900002170050000000900217005400800090D6
+:1014A0000217005808140000021700600000008AAC
+:1014B000021700640000008002170068000000901E
+:1014C0000217006C00000080021700700000000688
+:1014D00002170078000007D00217007C0000076C9C
+:1014E00002170038007C1004021700040000000FEF
+:1014F0000616402400000002021640700000001C86
+:10150000021642080000000102164210000000010D
+:1015100002164220000000010216422800000001CD
+:10152000021642300000000102164238000000019D
+:1015300002164260000000010C16401C0003D0900F
+:101540000A16401C0000009C0B16401C000009C439
+:101550000216403000000008021640340000000C63
+:10156000021640380000001002164044000000201F
+:101570000216400000000001021640D800000001E1
+:1015800002164008000000010216400C0000000195
+:101590000216401000000001021642400000000048
+:1015A00002164248000000000616427000000002C9
+:1015B00002164250000000000216425800000000CF
+:1015C00006164280000000020216600800000614A1
+:1015D0000216600C000006000216601000000604EF
+:1015E0000216601C0000FFFF021660200000FFFFD3
+:1015F000021660240000FFFF021660280000FFFFB3
+:1016000002166038000000200216603C0000002036
+:1016100002166040000000340216604400000035ED
+:1016200002166048000000230216604C00000024EF
+:1016300002166050000000250216605400000026CB
+:1016400002166058000000270216605C00000029A6
+:10165000021660600000002A021660640000002B81
+:10166000021660680000002C0216606C0000002D5D
+:101670000616607000000052021661B800000001FA
+:10168000061661BC0000001F0216623807FFFFFF4C
+:101690000216623C0000003F0216624007FFFFFF97
+:1016A000021662440000000F0116624800000000AC
+:1016B0000116624C0000000001166250000000009C
+:1016C000011662540000000001166258000000007C
+:1016D0000116625C0000000001166260000000005C
+:1016E000011662640000000001166268000000003C
+:1016F0000116626C0000000001166270000000001C
+:1017000001166274000000000116627800000000FB
+:101710000116627C00000000021664BC000000019B
+:101720000C166000000003E80A16600000000001CB
+:101730000B1660000000000A021680400000000640
+:101740000216804400000005021680480000000ACE
+:101750000216804C000000050216805400000002B2
+:10176000021680CC00000004021680D000000004A5
+:10177000021680D400000004021680D80000000485
+:10178000021680DC00000004021680E00000000465
+:10179000021680E400000004021680E80000000445
+:1017A0000216880400000004021680300000007C4D
+:1017B000021680340000003D021680380000003F11
+:1017C0000216803C0000009C021680F0000000071A
+:1017D000061680F4000000050216880C01010101C4
+:1017E00002168108000000000216810C00000004AF
+:1017F000021681100000000402168114000000028D
+:101800000216881008012004021681180000000545
+:101810000216811C00000005021681200000000550
+:1018200002168124000000050216882C20081001F1
+:1018300002168128000000080216812C0000000614
+:1018400002168130000000070216813400000000FB
+:1018500002168830010101200616813800000004BC
+:1018600002168834010101010616814800000004B7
+:101870000216883801010101061681580000000493
+:101880000216883C01010101061681680000000370
+:101890000216817400000001021688400101010156
+:1018A00002168178000000010216817C0000000110
+:1018B00002168180000000010216818400000001F0
+:1018C000021688440101010102168188000000010E
+:1018D0000216818C000000040216819000000004B2
+:1018E00002168194000000020216884808012004B4
+:1018F00002168198000000050216819C0000000578
+:10190000021681A000000005021681A40000000557
+:101910000216881420081001021681A80000000891
+:10192000021681AC00000006021681B0000000071C
+:10193000021681B40000000102168818010101207E
+:10194000021681B800000001021681BC00000001EF
+:10195000021681C000000001021681C400000001CF
+:101960000216881C01010101021681C80000000155
+:10197000021681CC00000001021681D00000000197
+:10198000021681D400000001021688200101010125
+:10199000021681D800000001021681DC000000015F
+:1019A000021681E000000001021681E4000000013F
+:1019B0000216882401010101021681E800000001DD
+:1019C000021681EC00000001021681F00000000107
+:1019D000021688280101010102168240FFFF003F24
+:1019E00006168244000000020216824CFFFF003FF0
+:1019F000021682500000010002168254000001000D
+:101A0000061682580000000202168260000000C024
+:101A100002168264000000C00216826800001E00E8
+:101A20000216826C00001E00021682700000400048
+:101A300002168274000040000216827800008000C6
+:101A40000216827C000080000216828000002000C6
+:101A5000021682840000200006168288000000071B
+:101A6000021682A400000001061682A80000000AE7
+:101A7000021681F400000C08021681F800000040F4
+:101A8000021681FC00000100021682000000002006
+:101A9000021682040000001702168208000000806F
+:101AA0000216820C000002000216821000000000E4
+:101AB00002168218FFFF01FF02168214FFFF01FFCA
+:101AC0000216823C00000013021680900000013FC5
+:101AD0000216806000000140021680640000014090
+:101AE000061680680000000202168070000000C028
+:101AF00006168074000000070216809C0000004853
+:101B0000021680A000000048061680A40000000213
+:101B1000021680AC00000048061680B000000007E6
+:101B2000021682380000800002168234000025E48C
+:101B30000216809400007FFF02168220000000073A
+:101B40000216821C00000007021682280000000016
+:101B500002168224FFFFFFFF021682300000000001
+:101B60000216822CFFFFFFFF021680EC000000FF30
+:101B700002140000000000010214000C000000012B
+:101B800002140040000000010214004400007FFF26
+:101B90000214000C0000000002140000000000000D
+:101BA0000214006C00000000021400040000000198
+:101BB00002140030000000010214000400000000C4
+:101BC0000214005C00000000021400080000000184
+:101BD000021400340000000102140008000000009C
+:101BE00002140060000000000202005800000032F1
+:101BF000020200A003150020020200A40315002029
+:101C0000020200A801000030020200AC081000002F
+:101C1000020200B000000033020200B400000030F5
+:101C2000020200B800000031020200BC0000000304
+:101C3000020200C000000006020200C4000000030F
+:101C4000020200C800000003020200CC00000002F3
+:101C5000020200D000000000020200D400000002D6
+:101C6000020200DC00000000020200E000000006AA
+:101C7000020200E400000004020200E8000000028A
+:101C8000020200EC00000002020200F0000000016D
+:101C9000020200FC00000006020201200000000019
+:101CA0000202013400000002020201B00000000143
+:101CB0000202020C000000010202021400000001F6
+:101CC00002020218000000020202040400000001E7
+:101CD0000202040C00000040020204100000004058
+:101CE0000202041C00000004020204200000002084
+:101CF0000202042400000002020204280000001F67
+:101D0000060205000000001204020480001F02D435
+:101D1000020200600000000F0202006400000007E1
+:101D2000020200680000000B0202006C0000000EBE
+:101D30000602007000000004020200F4000000042B
+:101D4000020200040000000102020008000000017D
+:101D50000202000C0000000102020010000000015D
+:101D6000020200140000000102020018000000013D
+:101D70000202001C0000000102020020000000011D
+:101D800002020024000000010202002800000001FD
+:101D90000202002C000000010202003000000001DD
+:101DA00002020034000000010202003800000001BD
+:101DB0000202003C0000000102020040000000019D
+:101DC000020200440000000102020048000000017D
+:101DD0000202004C0000000102020050000000015D
+:101DE00002020108000000C80202011800000002FF
+:101DF000020201C400000000020201CC0000000049
+:101E0000020201D400000002020201DC0000000214
+:101E1000020201E4000000FF020201EC000000FFEA
+:101E20000202010C000000C80202011C00000002B6
+:101E3000020201C800000000020201D00000000000
+:101E4000020201D800000002020201E000000002CC
+:101E5000020201E8000000FF020201F0000000FFA2
+:101E60000728040000B5000008280768001302F3E3
+:101E7000072C000033660000072C800038B30CDA12
+:101E8000072D00003BB11B07072D80002A2629F4EF
+:101E9000082DD6C0452802F50128000000000000EA
+:101EA00001280004000000000128000800000000D4
+:101EB0000128000C000000000128001000000000B4
+:101EC000012800140000000002280020000000018A
+:101ED000022800240000000202280028000000035D
+:101EE0000228002C0000000002280030000000043E
+:101EF0000228003400000001022800380000000021
+:101F00000228003C000000010228004000000004FC
+:101F100002280044000000000228004800000001E0
+:101F20000228004C000000030228005000000000BE
+:101F3000022800540000000102280058000000049C
+:101F40000228005C00000000022800600000000180
+:101F5000022800640000000302280068000000005E
+:101F60000228006C0000000102280070000000043C
+:101F7000022800740000000002280078000000041D
+:101F80000228007C000000030628008000000002F8
+:101F9000022800A400003FFF022800A8000003FF61
+:101FA0000228022400000000022802340000000081
+:101FB0000228024C00000000022802E40000FFFF9B
+:101FC0000628200000000800022B8BC00000000142
+:101FD000022B800000000000022B8040000000184F
+:101FE000022B80800000000C022B80C000000066E5
+:101FF0000C2B83000007A1200A2B8300000001386E
+:102000000B2B830000001388022B83C0000001F417
+:102010000C2B8340000001F40A2B834000000000D9
+:102020000B2B8340000000050A2B83800004C4B4FE
+:102030000C2B83801DCD65000B2B8380004C4B4007
+:10204000062A3D6000000004042A3D70000202F7E9
+:10205000062A300000000048062A1020000000C8B0
+:10206000062A100000000002062A31280000008E17
+:10207000022A336800000000042A3370000202F9CB
+:10208000042A3B90000402FB042A3E20000202FFC7
+:10209000022A151800000001022A18300000000072
+:1020A000022A183800000000042A18200002030148
+:1020B000062A4AC000000002062A4B000000000465
+:1020C000042A1F4800020303022B0800000000003E
+:1020D000042B0C0000100305022B08000100000077
+:1020E000042B0C4000080315022B0800020000001E
+:1020F000042B0C600008031D062A3BA000000014FE
+:10210000062A3C4000000024062A14000000000AB1
+:10211000062A145000000006062A3378000000FC4E
+:10212000022A3B5800000000042A3D7800020325E3
+:10213000042A3D8800100327022A15000000000031
+:10214000022A150800000001062A502000000002A3
+:10215000062A503000000002062A5000000000024B
+:10216000062A501000000002022A50400000000021
+:10217000062A50480000000E022A50B80000000154
+:10218000042A4AC800020337062A4B100000004206
+:10219000062A4D2000000004062A3BF0000000142F
+:1021A000062A3CD000000024062A14280000000A59
+:1021B000062A146800000006062A3768000000FCA2
+:1021C000022A3B5C00000000042A3D800002033923
+:1021D000042A3DC80010033B022A15040000000039
+:1021E000022A150C00000001062A502800000002F7
+:1021F000062A503800000002062A5008000000029B
+:10220000062A501800000002022A50440000000074
+:10221000062A50800000000E022A50BC0000000177
+:10222000042A4AD00002034B062A4C180000004240
+:10223000062A4D30000000040210100800000001C2
+:10224000021010000003D000021010040000003D36
+:10225000091018000200034D091011000020054D5F
+:102260000610118000000002091011880006056D9B
+:10227000061011A00000001806102400000000E065
+:102280000210201C000000000210202000000001AD
+:10229000021020C000000001021020040000000114
+:1022A000021020080000000109103C000005057321
+:1022B00009103C2000050578091038000005057D4F
+:1022C00002104028000000100210404400003FFFB0
+:1022D0000210405800280000021040840084924AF6
+:1022E0000210405800000000061080680000000442
+:1022F00002108000000010800610802800000002FC
+:102300000210803800000010021080400000FFFF23
+:10231000021080440000FFFF021080500000000007
+:102320000210810000000000061081200000000261
+:1023300002108008000002B50210801000000000AA
+:10234000061082000000004A021081080001FFFF11
+:1023500006108140000000020210800000001A8078
+:102360000610900000000024061091200000004A92
+:10237000061093700000004A061095C00000004A45
+:10238000021080040000108006108030000000025F
+:102390000210803C00000010021080480000FFFF87
+:1023A0000210804C0000FFFF02108054000000006B
+:1023B00002108104000000000610812800000002C5
+:1023C0000210800C000002B5021080140000000012
+:1023D000061084000000004A0210810C0001FFFF7B
+:1023E00006108148000000020210800400001A80DC
+:1023F0000610909000000024061092480000004A49
+:10240000061094980000004A061096E80000004A62
+:102410000212049000E383400212051400003C10F5
+:1024200002120494FFFFFFFF02120498FFFFFFFF58
+:102430000212049CFFFFFFFF021204A0FFFFFFFF38
+:10244000021204A4FFFFFFFF021204A8FFFFFFFF18
+:10245000021204ACFFFFFFFF021204B0FFFFFFFFF8
+:10246000021204B8FFFFFFFF021204BCFFFFFFFFD0
+:10247000021204C0FFFFFFFF021204C4FFFFFFFFB0
+:10248000021204C8FFFFFFFF021204CCFFFFFFFF90
+:10249000021204D0FFFFFFFF021204DCFFFFFFFF68
+:1024A000021204E0FFFFFFFF021204E4FFFFFFFF40
+:1024B000021204E8FFFFFFFF021204ECFFFFFFFF20
+:1024C000021204F0FFFFFFFF021204F4FFFFFFFF00
+:1024D000021204F8FFFFFFFF021204FCFFFFFFFFE0
+:1024E00002120500FFFFFFFF02120504FFFFFFFFBE
+:1024F00002120508FFFFFFFF0212050CFFFFFFFF9E
+:1025000002120510FFFFFFFF021204D4FFFF333059
+:10251000021204D8FFFF3340021204B4F00030006E
+:1025200002120390000000080212039C0000000841
+:10253000021203A000000008021203A4000000021F
+:10254000021203BC00000004021203C000000005D8
+:10255000021203C400000004021203D000000000B5
+:102560000212036C00000001021203680000003F29
+:10257000021201BC00000040021201C00000180855
+:10258000021201C400000803021201C8000008037F
+:10259000021201CC00000040021201D00000000332
+:1025A000021201D400000803021201D8000008033F
+:1025B000021201DC00000803021201E00001000326
+:1025C000021201E400000803021201E800000803FF
+:1025D000021201EC00000003021201F000000003EF
+:1025E000021201F400000003021201F800000003CF
+:1025F000021201FC000000030212020000000003AE
+:10260000021202040000000302120208000000038C
+:102610000212020C0000000302120210000000036C
+:10262000021202140000000302120218000000034C
+:102630000212021C0000000302120220000000032C
+:1026400002120224000000030212022800002403E8
+:102650000212022C0000002F0212023000000009BA
+:102660000212023400000019021202380000018434
+:102670000212023C00000183021202400000030625
+:102680000212024400000019021202480000000673
+:102690000212024C00000306021202500000030660
+:1026A00002120254000003060212025800000C86B7
+:1026B0000212025C00000306021202600000030620
+:1026C0000212026400000006021202680000000606
+:1026D0000212026C000000060212027000000006E6
+:1026E00002120274000000060212027800000006C6
+:1026F0000212027C000000060212028000000006A6
+:102700000212028400000006021202880000000685
+:102710000212028C00000006021202900000000665
+:102720000212029400000006021202980000000645
+:102730000212029C00000006021202A00000030622
+:10274000021202A400000013021202A800000006F8
+:10275000021202B000001004021202B400001004C1
+:102760000212032400106440021203280010644087
+:10277000021201B0000000010600A00000000016D7
+:102780000200A06CBF5C00000200A070FFF51FEF0C
+:102790000200A0740000FFFF0200A078500003E0D8
+:1027A0000200A07C000000000200A0800000A00049
+:1027B0000600A084000000050200A0980FE00000C1
+:1027C0000600A09C000000140200A0EC555400007C
+:1027D0000200A0F0555555550200A0F400005555D3
+:1027E0000200A0F8000000000200A0FC5554000008
+:1027F0000200A100555555550200A1040000555591
+:102800000200A108000000000200A22C000000004D
+:102810000600A230000000030200A06000000007D4
+:102820000200A10CBF5C00000200A110FFF51FEF29
+:102830000200A1140000FFFF0200A118500003E0F5
+:102840000200A11C000000000200A1200000A00066
+:102850000600A124000000050200A1380FE00000DE
+:102860000600A13C000000140200A18C5554000099
+:102870000200A190555555550200A19400005555F0
+:102880000200A198000000000200A19C5554000025
+:102890000200A1A0555555550200A1A400005555B0
+:1028A0000200A1A8000000000200A23C00000000FD
+:1028B0000600A240000000030200A0640000000720
+:1028C00000000000000000000000002E00000000DA
+:1028D00000000000000000000000000000000000F8
+:1028E00000000000000000000000000000000000E8
+:1028F00000000000000000000000000000000000D8
+:1029000000000000000000000000000000000000C7
+:1029100000000000000000000000000000000000B7
+:10292000002E005000000000000000000000000029
+:102930000000000000000000000000000000000097
+:102940000000000000000000000000000050008DAA
+:102950000000000000000000000000000000000077
+:102960000000000000000000000000000000000067
+:102970000000000000000000008D00920092009610
+:102980000096009A00000000000000000000000017
+:102990000000000000000000000000000000000037
+:1029A00000000000009A00DB00DB00E900E900F70E
+:1029B0000000000000000000000000000000000017
+:1029C0000000000000000000000000000000000007
+:1029D00000000000000000000000000000000000F7
+:1029E00000000000000000000000000000000000E7
+:1029F00000000000000000000000000000000000D7
+:102A000000000000000000000000000000000000C6
+:102A100000000000000000000000000000000000B6
+:102A200000000000000000000000000000000000A6
+:102A30000000000000000000000000000000000096
+:102A40000000000000000000000000000000000086
+:102A50000000000000000000000000000000000076
+:102A60000000000000000000000000000000000066
+:102A70000000000000000000000000000000000056
+:102A800000F700FE00000000000000000000000051
+:102A90000000000000000000000000000000000036
+:102AA0000000000000000000000000000000000026
+:102AB0000000000000000000000000000000000016
+:102AC0000000000000000000000000000000000006
+:102AD000000000000000000000FE01030103010EE1
+:102AE000010E0119000000000000000000000000BD
+:102AF00000000000000000000000000000000000D6
+:102B000000000000000000000000000000000000C5
+:102B100000000000000000000000000000000000B5
+:102B200000000000000000000000000000000000A5
+:102B30000119011A00000000000000000000000060
+:102B40000000000000000000000000000000000085
+:102B5000000000000000000000000000011A013E1B
+:102B60000000000000000000000000000000000065
+:102B70000000000000000000000000000000000055
+:102B80000000000000000000013E016400000000A1
+:102B90000000000000000000000000000000000035
+:102BA0000000000000000000000000000000000025
+:102BB00000000000016401A300000000000000000C
+:102BC0000000000000000000000000000000000005
+:102BD00000000000000000000000000000000000F5
+:102BE00001A301DE00000000000000000000000062
+:102BF00000000000000000000000000000000000D5
+:102C000000000000000000000000000001DE0224BF
+:102C10000224022C022C02340000000000000000FC
+:102C200000000000000000000000000000000000A4
+:102C300000000000000000000234027102710278FE
+:102C40000278027F00000000000000000000000089
+:102C50000000000000000000000000000000000074
+:102C600000000000027F0280000000000000000061
+:102C70000000000000000000000000000000000054
+:102C80000000000000000000000000000000000044
+:102C9000028002920000000000000000000000001E
+:102CA0000000000000000000000000000000000024
+:102CB000000000000000000000000000029202A7D7
+:102CC00002A702AA02AA02AD000000000000000054
+:102CD00000000000000000000000000000000000F4
+:102CE000000000000000000002AD02DB0000000058
+:102CF00000000000000000000000000000000000D4
+:102D000000000000000000000000000000000000C3
+:102D10000000000002DB0362000000000000000071
+:102D200000000000000000000000000000000000A3
+:102D30000000000000000000000000000000000093
+:102D4000036203690369036D036D037100000000F2
+:102D50000000000000000000000000000000000073
+:102D6000000000000000000000000000037103B03C
+:102D700003B003B803B803C0000000000000000067
+:102D80000000000000000000000000000000000043
+:102D9000000000000000000003C004130413042717
+:102DA0000427043B000000000000000000000000B9
+:102DB0000000000000000000000000000000000013
+:102DC00000000000043B044300000000000000007D
+:102DD00000000000000000000000000000000000F3
+:102DE00000000000000000000000000000000000E3
+:102DF000044304490000000000000000000000003F
+:102E000000000000000000000000000000000000C2
+:102E10000000000000000000000000000449044C15
+:102E200000000000000000000000000000000000A2
+:102E30000000000000000000000000000000000092
+:102E40000000000000000000044C045100000000DD
+:102E50000000000000000000000000000000000072
+:102E60000000000000000000000000000000000062
+:102E70000000000004510452045204640464047607
+:102E80000000000000000000000000000000000042
+:102E90000000000000000000000000000000000032
+:102EA000047604E3000000000000000000000000C1
+:102EB0000000000000000000000000000000000012
+:102EC00000000000000000000000000004E304E433
+:102ED00004E404F804F8050C000000000000000001
+:102EE00000000000000000000000000000000000E2
+:102EF00000000000000000000000000000000000D2
+:102F000000010000000204C00003098000040E401C
+:102F100000051300000617C000071C8000082140B0
+:102F200000092600000A2AC0000B2F80000C344044
+:102F3000000D3900000E3DC0000F428000104740D8
+:102F400000114C00001250C00013558000145A406C
+:102F500000155F00001663C00017688000186D4000
+:102F600000197200001A76C0001B7B80001C804094
+:102F7000001D8500001E89C0001F8E800020934028
+:102F80000000200000004000000060000000800001
+:102F90000000A0000000C0000000E00000010000F0
+:102FA00000012000000140000001600000018000DD
+:102FB0000001A0000001C0000001E00000020000CC
+:102FC00000022000000240000002600000028000B9
+:102FD0000002A0000002C0000002E00000030000A8
+:102FE0000003200000034000000360000003800095
+:102FF0000003A0000003C0000003E0000004000084
+:103000000004200000044000000460000004800070
+:103010000004A0000004C0000004E000000500005F
+:10302000000520000005400000056000000580004C
+:103030000005A0000005C0000005E000000600003B
+:103040000006200000064000000660000006800028
+:103050000006A0000006C0000006E0000007000017
+:103060000007200000074000000760000007800004
+:103070000007A0000007C0000007E00000080000F3
+:1030800000082000000840000008600000088000E0
+:103090000008A0000008C0000008E00000090000CF
+:1030A00000092000000940000009600000098000BC
+:1030B0000009A0000009C0000009E000000A0000AB
+:1030C000000A2000000A4000000A6000000A800098
+:1030D000000AA000000AC000000AE000000B000087
+:1030E000000B2000000B4000000B6000000B800074
+:1030F000000BA000000BC000000BE000000C000063
+:10310000000C2000000C4000000C6000000C80004F
+:10311000000CA000000CC000000CE000000D00003E
+:10312000000D2000000D4000000D6000000D80002B
+:10313000000DA000000DC000000DE000000E00001A
+:10314000000E2000000E4000000E6000000E800007
+:10315000000EA000000EC000000EE000000F0000F6
+:10316000000F2000000F4000000F6000000F8000E3
+:10317000000FA000000FC000000FE00000100000D2
+:1031800000102000001040000010600000108000BF
+:103190000010A0000010C0000010E00000110000AE
+:1031A000001120000011400000116000001180009B
+:1031B0000011A0000011C0000011E000001200008A
+:1031C0000012200000124000001260000012800077
+:1031D0000012A0000012C0000012E0000013000066
+:1031E0000013200000134000001360000013800053
+:1031F0000013A0000013C0000013E0000014000042
+:10320000001420000014400000146000001480002E
+:103210000014A0000014C0000014E000001500001D
+:10322000001520000015400000156000001580000A
+:103230000015A0000015C0000015E00000160000F9
+:1032400000162000001640000016600000168000E6
+:103250000016A0000016C0000016E00000170000D5
+:1032600000172000001740000017600000178000C2
+:103270000017A0000017C0000017E00000180000B1
+:10328000001820000018400000186000001880009E
+:103290000018A0000018C0000018E000001900008D
+:1032A000001920000019400000196000001980007A
+:1032B0000019A0000019C0000019E000001A000069
+:1032C000001A2000001A4000001A6000001A800056
+:1032D000001AA000001AC000001AE000001B000045
+:1032E000001B2000001B4000001B6000001B800032
+:1032F000001BA000001BC000001BE000001C000021
+:10330000001C2000001C4000001C6000001C80000D
+:10331000001CA000001CC000001CE000001D0000FC
+:10332000001D2000001D4000001D6000001D8000E9
+:10333000001DA000001DC000001DE000001E0000D8
+:10334000001E2000001E4000001E6000001E8000C5
+:10335000001EA000001EC000001EE000001F0000B4
+:10336000001F2000001F4000001F6000001F8000A1
+:10337000001FA000001FC000001FE0000020000090
+:10338000002020000020400000206000002080007D
+:103390000020A0000020C0000020E000002100006C
+:1033A0000021200000214000002160000021800059
+:1033B0000021A0000021C0000021E0000022000048
+:1033C0000022200000224000002260000022800035
+:1033D0000022A0000022C0000022E0000023000024
+:1033E0000023200000234000002360000023800011
+:1033F0000023A0000023C0000023E0000024000000
+:1034000000242000002440000024600000248000EC
+:103410000024A0000024C0000024E00000250000DB
+:1034200000252000002540000025600000258000C8
+:103430000025A0000025C0000025E00000260000B7
+:1034400000262000002640000026600000268000A4
+:103450000026A0000026C0000026E0000027000093
+:103460000027200000274000002760000027800080
+:103470000027A0000027C0000027E000002800006F
+:10348000002820000028400000286000002880005C
+:103490000028A0000028C0000028E000002900004B
+:1034A0000029200000294000002960000029800038
+:1034B0000029A0000029C0000029E000002A000027
+:1034C000002A2000002A4000002A6000002A800014
+:1034D000002AA000002AC000002AE000002B000003
+:1034E000002B2000002B4000002B6000002B8000F0
+:1034F000002BA000002BC000002BE000002C0000DF
+:10350000002C2000002C4000002C6000002C8000CB
+:10351000002CA000002CC000002CE000002D0000BA
+:10352000002D2000002D4000002D6000002D8000A7
+:10353000002DA000002DC000002DE000002E000096
+:10354000002E2000002E4000002E6000002E800083
+:10355000002EA000002EC000002EE000002F000072
+:10356000002F2000002F4000002F6000002F80005F
+:10357000002FA000002FC000002FE000003000004E
+:10358000003020000030400000306000003080003B
+:103590000030A0000030C0000030E000003100002A
+:1035A0000031200000314000003160000031800017
+:1035B0000031A0000031C0000031E0000032000006
+:1035C00000322000003240000032600000328000F3
+:1035D0000032A0000032C0000032E00000330000E2
+:1035E00000332000003340000033600000338000CF
+:1035F0000033A0000033C0000033E00000340000BE
+:1036000000342000003440000034600000348000AA
+:103610000034A0000034C0000034E0000035000099
+:103620000035200000354000003560000035800086
+:103630000035A0000035C0000035E0000036000075
+:103640000036200000364000003660000036800062
+:103650000036A0000036C0000036E0000037000051
+:10366000003720000037400000376000003780003E
+:103670000037A0000037C0000037E000003800002D
+:10368000003820000038400000386000003880001A
+:103690000038A0000038C0000038E0000039000009
+:1036A00000392000003940000039600000398000F6
+:1036B0000039A0000039C0000039E000003A0000E5
+:1036C000003A2000003A4000003A6000003A8000D2
+:1036D000003AA000003AC000003AE000003B0000C1
+:1036E000003B2000003B4000003B6000003B8000AE
+:1036F000003BA000003BC000003BE000003C00009D
+:10370000003C2000003C4000003C6000003C800089
+:10371000003CA000003CC000003CE000003D000078
+:10372000003D2000003D4000003D6000003D800065
+:10373000003DA000003DC000003DE000003E000054
+:10374000003E2000003E4000003E6000003E800041
+:10375000003EA000003EC000003EE000003F000030
+:10376000003F2000003F4000003F6000003F80001D
+:10377000003FA000003FC000003FE000003FE0012C
+:1037800000000000000001FF0000020000007FF8C0
+:1037900000007FF8000002920000350000000001E8
+:1037A0000000000300BEBC200000000300BEBC20DF
+:1037B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19
+:1037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:1037D000FFFFFFFF00000000FFFFFFFF00000000F1
+:1037E000FFFFFFFF0000000300BEBC20FFFFFFFF44
+:1037F00000000000FFFFFFFF00000000FFFFFFFFD1
+:103800000000000300BEBC2000002000000040C0FB
+:1038100000006180000082400000A3000000C3C0DF
+:103820000000E4800001054000012600000146C0C0
+:1038300000016780000188400001A9000001C9C0A3
+:103840000001EA8000020B4000022C0000024CC084
+:1038500000026D8000028E400002AF000002CFC067
+:103860000002F0800003114000033200000352C048
+:1038700000037380000394400003B5000003D5C02B
+:103880000003F6800004174000043800000458C00C
+:103890000004798000049A40000080000001038049
+:1038A0000001870000020A8000028E0000031180E0
+:1038B000000395000004188000049C0000051F8090
+:1038C0000005A300000626800006AA0000072D8040
+:1038D0000007B100000834800008B80000093B80F0
+:1038E0000009BF00000A4280000AC600000B4980A0
+:1038F000000BCD00000C5080000CD400000D578050
+:10390000000DDB0000007FF800007FF8000003E5F9
+:10391000000015000000190000000000FFFFFFFF7D
+:103920004000000040000000400000004000000097
+:103930004000000040000000400000004000000087
+:103940004000000040000000400000004000000077
+:103950004000000040000000400000004000000067
+:103960004000000040000000400000004000000057
+:103970004000000040000000400000004000000047
+:103980004000000040000000400000004000000037
+:103990004000000040000000400000004000000027
+:1039A00000007FF800007FF8000003C80000150049
+:1039B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17
+:1039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:1039D00040000000400000004000000040000000E7
+:1039E00040000000400000004000000040000000D7
+:1039F00040000000400000004000000040000000C7
+:103A000040000000400000004000000040000000B6
+:103A100040000000400000004000000040000000A6
+:103A20004000000040000000400000004000000096
+:103A30004000000040000000400000004000000086
+:103A40004000000040000000400000004000000076
+:103A500000001000000020800000310000004180C4
+:103A600000005200000062800000730000008380AC
+:103A7000000094000000A4800000B5000000C58094
+:103A80000000D6000000E6800000F700000107807B
+:103A90000001180000012880000139000001498060
+:103AA00000015A0000016A8000017B0000018B8048
+:103AB00000019C000001AC800001BD000001CD8030
+:103AC0000001DE000001EE800001FF0000007FF831
+:103AD00000007FF800000207000035001000000021
+:103AE000000028AD000000000001000100350804BE
+:103AF000CCCCCCC1FFFFFFFFFFFFFFFF7058103C95
+:103B000000000000CCCC0201CCCCCCCC00000000EA
+:103B1000FFFFFFFF400000004000000040000000E9
+:103B20004000000040000000400000004000000095
+:103B30004000000040000000400000004000000085
+:103B40004000000040000000400000004000000075
+:103B50004000000040000000400000004000000065
+:103B60004000000040000000400000004000000055
+:103B70004000000040000000400000004000000045
+:103B80004000000040000000400000004000000035
+:103B900040000000000E01B7011600D60000FFFF34
+:103BA000000000000000FFFF000000000000FFFF19
+:103BB000000000000000FFFF000000000000FFFF09
+:103BC000000000000000FFFF000000000000FFFFF9
+:103BD000000000000000FFFF0000000000100000D7
+:103BE00000000000007201BB012300F30000FFFF92
+:103BF000000000000000FFFF000000000000FFFFC9
+:103C0000000000000000FFFF000000000000FFFFB8
+:103C1000000000000000FFFF000000000000FFFFA8
+:103C2000000000000000FFFF000000000010000086
+:103C300000000000FFFFFFF3320FFFFF0C30C30C4A
+:103C4000C30C30C3CF3CF300F3CF3CF30000CF3CB8
+:103C5000CDCDCDCDFFFFFFF130EFFFFF0C30C30C1A
+:103C6000C30C30C3CF3CF300F3CF3CF30001CF3C97
+:103C7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C85
+:103C8000C30C30C3CF3CF300F3CF3CF30002CF3C76
+:103C9000CDCDCDCDFFFFF4061CBFFFFF0C30C3051B
+:103CA000C30C30C3CF300014F3CF3CF30004CF3C3F
+:103CB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C59
+:103CC000C30C30C3CF3CF300F3CF3CF30008CF3C30
+:103CD000CDCDCDCDFFFFFFFA302FFFFF0C30C30C51
+:103CE000C30C30C3CF3CF300F3CF3CF30010CF3C08
+:103CF000CDCDCDCDFFFFFFF731EFFFFF0C30C30C73
+:103D0000C30C30C3CF3CF300F3CF3CF30020CF3CD7
+:103D1000CDCDCDCDFFFFFFF5302FFFFF0C30C30C15
+:103D2000C30C30C3CF3CF300F3CF3CF30040CF3C97
+:103D3000CDCDCDCDFFFFFFF3310FFFFF0C30C30C16
+:103D4000C30C30C3CF3CF300F3CF3CF30000CF3CB7
+:103D5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF8
+:103D6000C30C30C3CF3CF300F3CF3CF30001CF3C96
+:103D7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C84
+:103D8000C30C30C3CF3CF300F3CF3CF30002CF3C75
+:103D9000CDCDCDCDFFFFF4061CBFFFFF0C30C3051A
+:103DA000C30C30C3CF300014F3CF3CF30004CF3C3E
+:103DB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C58
+:103DC000C30C30C3CF3CF300F3CF3CF30008CF3C2F
+:103DD000CDCDCDCDFFFFFFFA302FFFFF0C30C30C50
+:103DE000C30C30C3CF3CF300F3CF3CF30010CF3C07
+:103DF000CDCDCDCDFFFFFFF730EFFFFF0C30C30C73
+:103E0000C30C30C3CF3CF300F3CF3CF30020CF3CD6
+:103E1000CDCDCDCDFFFFFFF5304FFFFF0C30C30CF4
+:103E2000C30C30C3CF3CF300F3CF3CF30040CF3C96
+:103E3000CDCDCDCDFFFFFFF331EFFFFF0C30C30C35
+:103E4000C30C30C3CF3CF300F3CF3CF30000CF3CB6
+:103E5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF7
+:103E6000C30C30C3CF3CF300F3CF3CF30001CF3C95
+:103E7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C83
+:103E8000C30C30C3CF3CF300F3CF3CF30002CF3C74
+:103E9000CDCDCDCDFFFFF4061CBFFFFF0C30C30519
+:103EA000C30C30C3CF300014F3CF3CF30004CF3C3D
+:103EB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C57
+:103EC000C30C30C3CF3CF300F3CF3CF30008CF3C2E
+:103ED000CDCDCDCDFFFFFFFA302FFFFF0C30C30C4F
+:103EE000C30C30C3CF3CF300F3CF3CF30010CF3C06
+:103EF000CDCDCDCDFFFFFF97056FFFFF0C30C30C7D
+:103F0000C30C30C3CF3CC000F3CF3CF30020CF3C08
+:103F1000CDCDCDCDFFFFFFF5310FFFFF0C30C30C32
+:103F2000C30C30C3CF3CF300F3CF3CF30040CF3C95
+:103F3000CDCDCDCDFFFFFFF3320FFFFF0C30C30C13
+:103F4000C30C30C3CF3CF300F3CF3CF30000CF3CB5
+:103F5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF6
+:103F6000C30C30C3CF3CF300F3CF3CF30001CF3C94
+:103F7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C82
+:103F8000C30C30C3CF3CF300F3CF3CF30002CF3C73
+:103F9000CDCDCDCDFFFFF4061CBFFFFF0C30C30518
+:103FA000C30C30C3CF300014F3CF3CF30004CF3C3C
+:103FB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C56
+:103FC000C30C30C3CF3CF300F3CF3CF30008CF3C2D
+:103FD000CDCDCDCDFFFFFF8A042FFFFF0C30C30CEA
+:103FE000C30C30C3CF3CC000F3CF3CF30010CF3C38
+:103FF000CDCDCDCDFFFFFF9705CFFFFF0C30C30C1C
+:10400000C30C30C3CF3CC000F3CF3CF30020CF3C07
+:10401000CDCDCDCDFFFFFFF5310FFFFF0C30C30C31
+:10402000C30C30C3CF3CF300F3CF3CF30040CF3C94
+:10403000CDCDCDCDFFFFFFF3300FFFFF0C30C30C14
+:10404000C30C30C3CF3CF300F3CF3CF30000CF3CB4
+:10405000CDCDCDCDFFFFFFF1300FFFFF0C30C30CF6
+:10406000C30C30C3CF3CF300F3CF3CF30001CF3C93
+:10407000CDCDCDCDFFFFFFF6305FFFFF0C30C30C81
+:10408000C30C30C3CF3CF300F3CF3CF30002CF3C72
+:10409000CDCDCDCDFFFFF4061CBFFFFF0C30C30517
+:1040A000C30C30C3CF300014F3CF3CF30004CF3C3B
+:1040B000CDCDCDCDFFFFFFF2304FFFFF0C30C30C55
+:1040C000C30C30C3CF3CF300F3CF3CF30008CF3C2C
+:1040D000CDCDCDCDFFFFFFFA302FFFFF0C30C30C4D
+:1040E000C30C30C3CF3CF300F3CF3CF30010CF3C04
+:1040F000CDCDCDCDFFFFFF97040FFFFF0C30C30CDC
+:10410000C30C30C3CF3CC000F3CF3CF30020CF3C06
+:10411000CDCDCDCDFFFFFFF5300FFFFF0C30C30C31
+:10412000C30C30C3CF3CF300F3CF3CF30040CF3C93
+:10413000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C47
+:10414000C30C30C3CF3CF3CCF3CF3CF30000CF3CE7
+:10415000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C27
+:10416000C30C30C3CF3CF3CCF3CF3CF30001CF3CC6
+:10417000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C07
+:10418000C30C30C3CF3CF3CCF3CF3CF30002CF3CA5
+:10419000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE7
+:1041A000C30C30C3CF3CF3CCF3CF3CF30004CF3C83
+:1041B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC7
+:1041C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5F
+:1041D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA7
+:1041E000C30C30C3CF3CF3CCF3CF3CF30010CF3C37
+:1041F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C87
+:10420000C30C30C3CF3CF3CCF3CF3CF30020CF3C06
+:10421000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C66
+:10422000C30C30C3CF3CF3CCF3CF3CF30040CF3CC6
+:10423000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C46
+:10424000C30C30C3CF3CF3CCF3CF3CF30000CF3CE6
+:10425000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C26
+:10426000C30C30C3CF3CF3CCF3CF3CF30001CF3CC5
+:10427000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C06
+:10428000C30C30C3CF3CF3CCF3CF3CF30002CF3CA4
+:10429000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE6
+:1042A000C30C30C3CF3CF3CCF3CF3CF30004CF3C82
+:1042B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC6
+:1042C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5E
+:1042D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA6
+:1042E000C30C30C3CF3CF3CCF3CF3CF30010CF3C36
+:1042F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C86
+:10430000C30C30C3CF3CF3CCF3CF3CF30020CF3C05
+:10431000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C65
+:10432000C30C30C3CF3CF3CCF3CF3CF30040CF3CC5
+:10433000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C45
+:10434000C30C30C3CF3CF3CCF3CF3CF30000CF3CE5
+:10435000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C25
+:10436000C30C30C3CF3CF3CCF3CF3CF30001CF3CC4
+:10437000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C05
+:10438000C30C30C3CF3CF3CCF3CF3CF30002CF3CA3
+:10439000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE5
+:1043A000C30C30C3CF3CF3CCF3CF3CF30004CF3C81
+:1043B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC5
+:1043C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5D
+:1043D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA5
+:1043E000C30C30C3CF3CF3CCF3CF3CF30010CF3C35
+:1043F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C85
+:10440000C30C30C3CF3CF3CCF3CF3CF30020CF3C04
+:10441000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C64
+:10442000C30C30C3CF3CF3CCF3CF3CF30040CF3CC4
+:10443000CDCDCDCD0010000000070100000281703D
+:10444000000B81980002025000010270000F0280F0
+:1044500000010370000800000008008000028100D5
+:10446000000B8128000201E0000102000007021099
+:1044700000020280000F0000000800F000028170BE
+:10448000000B81980002025000010270000B828034
+:1044900000080338001000000008010000028180BD
+:1044A000000B81A80002026000018280000E829849
+:1044B0000008038000028000000B8028000200E05A
+:1044C000000101000000811000000118CCCCCCCC10
+:1044D000CCCCCCCCCCCCCCCCCCCCCCCC000020002C
+:1044E000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC0C
+:1044F00000002000CCCCCCCCCCCCCCCCCCCCCCCC0C
+:10450000CCCCCCCC0000200000000000000000005B
+:104510001F8B08000000000000FFFB51CFC0F0031C
+:104520008A45D91918FC3811FCA18059981918D856
+:10453000809803883D80B8819181A1919178FDDABE
+:10454000620876BF3003C36E20E611029A23821000
+:104550009F0254F306C85F0F15B312656038263A00
+:10456000F07EA706DE2A8D29364512C1DE86451E5D
+:10457000196F4793FF2289CADF4140FF40632965D5
+:1045800054BE9D22845EA604A1A5D1E4EDA1F2D77C
+:10459000A1FE9251C66EEE0DA83C00F85C49656024
+:1045A00003000000000000001F8B08000000000056
+:1045B00000FFED7D0B7854D5B5F03E73CE9C994944
+:1045C000CE4C4E4212F2224C1288A0210CAF808AAF
+:1045D0007F270122F539202858D40142087983D455
+:1045E0004BAFEDCD8424101135F447058B76885000
+:1045F000D1A20D34D260C10E20147B6D6FF0FAC0D1
+:10460000EAF50B4841312FB1207EC5CBBFD6DAE7A2
+:1046100064E64C2680D8DBAFFFFFFDB4B8D9E7ECE9
+:10462000B3F7DAEBB5D75A7BED3D92750293BFC76E
+:10463000D845FC03E54F4D8CB109C1F26766F680A1
+:104640002787B1C9BDFE3A473C63556D193BA29D12
+:104650008C25EC9921142850FED5232C5082DFBFE5
+:1046600065C397F0FFB619423E7C97D0E911E6C3C7
+:10467000FBE4D5026B873A939C310CEA8CB9194B59
+:10468000642C6B12A33F224B8D82FFE07325398F80
+:10469000B134FC2774754661AEC078C6321E535CD7
+:1046A000D4D0A93815783F847FC6D2BC25B731074E
+:1046B00063CF03BCC971F0BC5A3ADE61E5EF2EC28C
+:1046C000DFA1F33A6ACD58AE303E7732A789654113
+:1046D000BF3EE3F3AC46633D9BD9E34F46C33FEC9B
+:1046E000CC7E518C308F13B18C013CCB540E2F6398
+:1046F000BDB26754101F9B6A58A2322C580F2F85E9
+:1047000065873356035E97ED165C16F8FE396C2FFD
+:1047100031E6D7BE6BD6EA153E5962A3A10404B5B3
+:10472000E4F4EF6711CBBF11F1FE302BA0B24AEADF
+:10473000955580AFAA5A76FB95FEED673389E8540C
+:1047400029B9F65B61FCDE5AE66A86F19799D502D3
+:10475000AC2FFB91D3E5837A6663472183FAD03689
+:10476000818919C1EFAF009EDB917F001E2A2BA526
+:10477000DE420674ECDD2BB0E60C1C87F7BB6C77D1
+:1047800006F3650C0CE758662638E732413A89741F
+:10479000713007D2C1BC24F38942A8CE54DCF3B0F7
+:1047A0007F9FE29D87EDF4E7490BE638BD0057F2A5
+:1047B0005066A057B1B53A9D653256EA692944BEA4
+:1047C00038B5EC8D5558029E1324C0F77C8BA70892
+:1047D000FBA998579DCD80A7E659188D3FB42DFFB2
+:1047E0003309F80CBAF3C5C4213F31763C844FF04D
+:1047F000CFF1115A5D1C98DE972B8BB01F09F10584
+:104800007217011F3F42A026E0284D543A57FC2959
+:104810006BD8A0D0FA5B59C3C66900E511BC0C3F48
+:1048200061AC4308E54BBD1CBA3BFFB0943B303C48
+:10483000FFD3F30474127EAB00B7C81F1576D9BF3F
+:1048400012F861CAABE6C0F7803F2A360B7E0BD464
+:104850004DAFDBE87DF7265E0FD86537F24FD716F0
+:10486000A80BF0BDA5FDF11B91BF5E155933763B3A
+:1048700022CA84FAE5A4063B1B0F75C047B18D57C9
+:104880002B36EFBB1FBF2F69B3301BF457B17BF141
+:104890001D37427DF16133C326155B6BE514A82FEC
+:1048A000F10B2D58EF29E0F0F97689FEADD0BEC7A7
+:1048B000D19E381BE873BAC6CA9C326375F6F6C43B
+:1048C00059C067A5FE1D85F85DE976C185689FF230
+:1048D000EAD643C938AF17B97C976D8B664E1D7FFA
+:1048E000F0F764AB18F81EBC5F06F364D0EF62D635
+:1048F00054887AB062EB3AD9690FE2EB748D4AE3DF
+:10490000F4C9DF8B300E7C57F98AE0C229569A9899
+:1049100017E5B07BB76DCEF30ACEAF56CEB6E3BC8B
+:1049200056CBD86EB17FFE2E54CDA5FECD7221BCE4
+:104930002FDDB4592E0E91DBB26D838C706DC81AC9
+:10494000EC8D20D7417880D7B283F552D403A80FDD
+:1049500025BF3C2384CF2A8558E2CBB26D22731A3F
+:10496000F888D3DDF72EFC13F0E5DB6B27BCEA7487
+:10497000EBD3A71ADDCEA81A1DA5DEBC1911F8F8D5
+:1049800071A403C0D384788272AD069F6332CB9743
+:10499000A07F879BA902BB3C5F3699D97C0663F553
+:1049A000B007DDD2F55097D952E682F550FAB17BC7
+:1049B0002AD49304EF67389F7AC15BC2D7AB9624A1
+:1049C0000FE07995C0E6E0FC8F21D030AF55C9C02B
+:1049D0009F80F7A66979CF8B82067B3CD68B7FB10F
+:1049E0002683FA3943FD98A19FACCBF7A3164E322C
+:1049F000F4A31696E8FDFC8DFAB15D593F4D85375D
+:104A000018E1292CD5FB910468576FBFB279A937FB
+:104A10004F36C2737339F5133BD5C5BC0AAEE71ADE
+:104A20003FB076B708EF95EDB163D7B050BE2850D0
+:104A30000580DB0E5212CA173193A20C7C18EB8E44
+:104A400033D4A127F5E47541FD138895697C394578
+:104A500026BD909F62A5FA43290AE985876EF05E1C
+:104A600083EB208ECD92A12E7B47AB11F81AE01478
+:104A7000581296601724F57FBFDACCF150907A2156
+:104A8000FB187C5F65EACD8E85FA35A6FC6B116F4D
+:104A90002E81EBE528915563BB280B23FDB43A2307
+:104AA000EF795F089E1A8700FD8560BF8D666F12E3
+:104AB000F2D7F8DA677C12C0B76A08CC2705BA12B9
+:104AC0009E09F8603D5A3DA43809F1699141BE4301
+:104AD000C79761FC1C1AFF06C4A31BC74FE83FBE63
+:104AE000257392617C6B7A89617CAB0CE303BF4FC9
+:104AF000AD6DD6C607FCDDC0D834A199C6B7A49762
+:104B0000D0F8AB655662183FAA6FFC5B70FE9E81C1
+:104B1000E69F798371FEE9A5C6F9CB7CFEB36A5F97
+:104B2000D2C68FA2F9CF165EE2F34F2FE5F3B7F0AE
+:104B30007EFBC677F4E1FF5E9CBF7780F12D599331
+:104B40008DF31F5A6E9CBF858F5F54BB531B5FA1B3
+:104B5000F117093BF9FC8796D3F8B2C5EB423E92B8
+:104B600053A3AAFD684FA481400C261DE5A672043C
+:104B70001805A01F860A9904C743519CEFCE450132
+:104B8000BF29417DC7FC2051A0CF2A359E2FDB9E37
+:104B90002FA39EA5F7896837F13F456D22AD376C8D
+:104BA000BDC53F1CE0ED6E137D582F5A7F935FA467
+:104BB000F58EDBE560C605F0F95F9E1CD51C3AAFAB
+:104BC000F0725193F96487418E383CBE0236A21AC6
+:104BD000E06B47269810AC9F043D0AC62F3B0E7A27
+:104BE00014CB53666E8F9C003DCBE450B9A9E5F61B
+:104BF000888FBD9303F3BA5B83FFA4C4F17D72B9C0
+:104C0000E047FC9F5BB75446FDB4A8098CE91079D6
+:104C1000AFD2E8D4BBDBE26F16089F4EC4CF3D2471
+:104C20008A8CFD9766D72FDE30C8F0DD3CE66F48F2
+:104C300082F60BD7CE1FA2C2FC7F30C73216ED53CF
+:104C400090845413C9314B35816F31A7759D391547
+:104C50002AF7CC311BECFAB95E63FD0725C67AB79B
+:104C6000D96F36A1BDB144609BA1DFFBAA8DEFF5E2
+:104C7000713609719CAEDA7877277278EFC3722C9F
+:104C80003E5689AEF7ABFC5B1D9EAA87CD2C40EB50
+:104C9000654702433AFA12C85EF3AA7CDEE1F0DE11
+:104CA0006FB6BA3D00CFFD3F12099FE1F077BC1E01
+:104CB000ED36811DD7B1E14B33DAB7E1F30987FF58
+:104CC0008115E1F35165D4F7F37DE1CF399F84F38A
+:104CD00053555BFEA01321ED2A5ABE3FE844087FDE
+:104CE000956D9B61A82FF1CF35B45FBC61BEE1FD2E
+:104CF000A2A62586F70B1B971AEAF37D3F32B47FF5
+:104D00006045ADE1FD7DD58F18DEFFA0649DA13E1D
+:104D1000D7BBD1D0FE9E399B0DEF4DAF8FBC13E5B5
+:104D2000A8EE5D91E1BA715639F938DA836715C991
+:104D300085F4F8B42689E4E0748D93CAEEB6715612
+:104D40002FD783C50C4C9C5EE19CAF7132EA65465F
+:104D5000FAF3AFC2059F0FEA7F139C843F7183CCA7
+:104D600002C0C2028BEBE3E35E31E47DC765DE6F18
+:104D700000411FD7FFBDD811F97955F3FCA16A0492
+:104D8000FF2128B72C15D7B91E6D7D0F7F5F2E3000
+:104D90004FE873C656929CD769EB4CB9CCF541F9F4
+:104DA000CEE402F4BFCBE54076F5A5C66B01A4A224
+:104DB0009E44EB3C01F901A4C0C02F5906F9EEDC7A
+:104DC00027125C95A81340AFAE639EC126D43381F1
+:104DD00003E9778D4238DC49546F4BA075BDB3664B
+:104DE000FAA01312D2C743E5A73573A83C59E3A52F
+:104DF000F2444D0995C76BAAA9ECA85941E5C735FE
+:104E00003E2A3FAA69A4F2CF354D541EADD940E5E4
+:104E10007B357E2ABB6BDC54F6F92BBAFE8DD7ECC2
+:104E200055CDAF809587EA67B4B9D443DB769273EA
+:104E30005712CAF919E55C36DAE3678E8263993155
+:104E400030BEC2F96D603ABAC95E29F603FDC7F5F6
+:104E50007F6F8BE274B299D87470A6D923C37FE1B7
+:104E60005A9043750959061624D70C7B847E61ED50
+:104E7000437A5D8E4ECCDD9B3B13E871F299BFE522
+:104E800061BF75DAFA177540A47598059E7721BD44
+:104E900042F046EB5AEFAB9ABEBF0CFEBAFAF0D71F
+:104EA0009E8EFEFB4141A5FECFB45A988478DC1358
+:104EB000ED07E667670E3FEF40795C9664524F441A
+:104EC000C0835E56B464A84AE8FAD366AC9F691200
+:104ED000A6B7D07AEC8C99350AF94A554F0C43FAAB
+:104EE0002751A9F7B32C49564F80BC9EDE9615C3B7
+:104EF000D76F3F5F07B7C712BF825F48EDFFDEF095
+:104F00000CD48F0E0F63ADEC132BEA037897F5EDFD
+:104F1000FD7226FD95E2576C8FF91CDA0B16F87BB3
+:104F200091E20712D5F57EAB5A449F65343EDF6EA1
+:104F3000180FBE73EA3EF7C5CC4BF1ADC44E86C424
+:104F400011D669F1C6B26D36D5B8AEC41AEA556D40
+:104F5000C9AA619DC17F80FCB36A4142BE29D7B80E
+:104F6000A847521A0580AFDCE4A47EAB04DEAEC2D3
+:104F7000DA217BE151572BA7DB40F09DAE39EC9451
+:104F800040DE4BACE001027C252D23A7A29EEB6AFC
+:104F9000AD4B447BB04C3CF39027C2F73B4D028DA8
+:104FA000B7C46FEE35AEA31A7F30E8577F4E7E163A
+:104FB000534E86D43B4DDCCE0EEFF780D6EFE5F0B6
+:104FC00053B9FD48E18DCEFE78AA6CFB42F6921CE7
+:104FD000C1FFF28278D2F1576EF21C407D5ABAEDD1
+:104FE00018D9A39F9A7DD90F5F423FF59F9F9244A6
+:104FF00071527D5E3E3029619C055A7C17F8F79E00
+:105000000F613DFDECDFCD6C0DC0C72E402B786FDE
+:10501000D65F331333417DA1565BD05A4671DDCF45
+:105020004CDC8E2A621E07D18135E5A11DD9C54C05
+:10503000D3114F5DEC6DC7B8103A9C32C9A4671606
+:10504000361AED18B07F0DF5C51B8CF5623633119D
+:10505000F549F17A33F30B343FC3FBF74D2AE17F77
+:1050600031AB5E85EBAAA4F9230B5426A5027C156F
+:10507000BF79366F3EC65F4CDC0FD1E3234BE2387D
+:10508000FCA5F17ED90DEF3F691D77F78D48068BA2
+:105090007F15C689580C736D65FDF1FB6DE10F87B7
+:1050A000575FAFFBC5693438C46D82DB1F817F2F2A
+:1050B000687CA6EBEB5B44D5E017DC8DF510BF21D7
+:1050C00046D4E2B2221391EE5DAAD5678AA1F71405
+:1050D000B7F7EDB4B8EA80DE3F3779068913C84EDA
+:1050E000C86521ED7E6EF2D2F34EE1AD62B45B99FC
+:1050F00014C8453B14D618E25359E30731CA918BC3
+:10510000F1663B837514E86F41F8A09F55F692DB7A
+:10511000582EC6BB41DEA1BFC71C858705A8DB94FE
+:105120005686FD59928CF17C9BD358AFC27F201DCF
+:1051300046308A3F458F90C2F01860A80FED2EE3ED
+:10514000F351E88491DD1F203E76108B43695502B0
+:10515000228CCF26499D7DFE5626FA7B1C7E8A2F07
+:1051600040FBE52A6F5FA9C5CF977F503038EE121C
+:10517000FAA8EA3C68904121753DBE7F5E62FE71EF
+:10518000DF416F3A61550DD19B734DDE69480FD4F5
+:1051900093089F00E3780D76609A1A2AE70BC2F80D
+:1051A000E3AAE1886706FD5D6EF2DE2D26F487E353
+:1051B000AAFB4FEAD7FF8248F3BCEAFE87F5EBBFB4
+:1051C0003252FF15BF7979970FF8A9F4574F3A80FB
+:1051D00099D9675253A20BE85EBEB5C18172F9A995
+:1051E000E473205D3FF38BD323C9E71651974FB784
+:1051F00022E411FF101F9D7EE9D13BD0AE3AB7D516
+:10520000AC527C609B256001A6AC6C5DC2E5639BE3
+:10521000E518AFAFFE02F9B3AACDA82F4A5F7832E6
+:1052200011E3CD4049CD7F0E907F50B9E52F8568C1
+:105230007755B15ED27BE1DFE1F8E7E3C81E982F36
+:10524000C7F47FAFEFF3556978A96A7DF40B9184B9
+:10525000A583FCCDF0F6259ABDFFA4688FA738DFA3
+:10526000443611F94CC707F3737BBFEEC5A7738FA4
+:10527000013C9D5BFEDD21E484F227D77B675A1653
+:10528000FEFC35E7C0F2D40D7A31D4AED6D76767CD
+:105290009BE6A7ECE165B939E0403FB07CB3D9E5C6
+:1052A00043BABEFCFC2F9EC1B8CC0716D770E8BF2E
+:1052B000ECE583EFDD00F5B21DE6F8DBF8341421F0
+:1052C0003148972AF8BB626C900EA5BF3E283B4739
+:1052D000F1E73F8E0BD2A36CC73E998DEA8F8F29E1
+:1052E0002DFBE40E25025D5A8E15A23F51F7E257C1
+:1052F00032EAAFCF5E17D8E08C08F8DC7C90EC6225
+:10530000C413D151A3531FDDC2DA57015D50BFEA68
+:10531000740A7FFF2F9AFEC7FE9C39C4CFAFBC86AC
+:10532000FB287FB6B870FE25AF3CE8C0799C92AAF6
+:10533000395F3FDB90E886714BCCBE44954AFEBC9A
+:10534000E4B91F12BF2D3EF2C3448A7F3077B28981
+:105350006C055F32CE6FD1A6D934BF62E625BE2B75
+:105360007956F4E0FEE059894DDF11412E5224AE0A
+:105370008F4F355B704D65A770E1C07D85B745FFE8
+:10538000568AFF2DA5F8CA0FF5FD20B68CEA67AD49
+:105390009C4E5F88FABE1AAC3CA1FCBA65753BD244
+:1053A000E7F410F7608C1B5731C9A7E143B808FD3B
+:1053B0008A47A60DE6F4614E294FFB0EF4FD147CDE
+:1053C0008EEDDBCD6E5BAEE13B76312338FE726D48
+:1053D0007C803B0AEDD5538960FF45985FA1A4AF5F
+:1053E00037605785F057887C7379DFF208976F5DD7
+:1053F000DEFD33A6E3FBBFBEC3E507BF437B05E08D
+:105400000A0CA6F7FB6609A40F2C2C1049AEB7981E
+:1054100035B936BED7F904E09670DDEDE317EC3F01
+:105420008EF04F766CF17AF82E445F56E1788EFE5E
+:10543000FDE972BB5893FF04C928FF6C1397FB81E9
+:10544000FD091F8F4B98FDBF7806E515E413F7AFF4
+:10545000CB5F367B70DE9F6F3FF0DEBD20A79FB72E
+:10546000E8726AD49FE1725AB273028B24A79F63D9
+:105470001A42243985E711E554E9203EFE47E94FF9
+:105480001D7F3785E14FD78703E1315C1FFE5974DB
+:1054900046D487F0E71D96D79FFF74BED3F9ADF4CD
+:1054A000971543293EA6F3A5CE777D7CA9F35DBF72
+:1054B00078A3017FE1EF2D188301B83CBBCD1447E1
+:1054C00028DFC3F77FE1BB43A9E3094F6E5AC658F3
+:1054D000D3A1D4F8D0BA3FACDE12D6DE1D56F78485
+:1054E000B5F786D5AB0DEDCBDB0EC83CAF256068BC
+:1054F00027AE78867D322812BFFAB95FDAFA85ECDA
+:1055000043BE507AE97BF34AE6B3633C7CAF48F193
+:10551000911EC0F12A18A7677B861FF3241A6C3CE2
+:10552000EED4A3F63AD05E6C88E5F5DE047915EA90
+:105530003DFD79AF8DC7F57A3CBD8ED810FBEDD817
+:105540001E91F476879F4D8FE467C28A4272D4C160
+:10555000067ACFE3FDD344257D05C65F9A441786BE
+:10556000748A6AEF71609E41CF9EAC3BE7C0F34501
+:105570006F8AB48DD883767B0C92C72D2587F877F8
+:105580009F32DF5393317EBF87FB79456BC3EC11AC
+:10559000B696F8A958592EA33E05BFECB871FF8204
+:1055A000CB45A9D65FC926E37BFD7BDCC145FBBDAE
+:1055B000748BF1BD578B0734EB7232868DD1FC7141
+:1055C0001E8FD2F4F23431E7CE39408F9EC322C30E
+:1055D000FDFB337B44A2C799ED7CBF9EE2F6D72347
+:1055E0007FF7923ED4F1D489F2240FACAF3A5FFD3D
+:1055F000AFBC87916F767D98FB33283B777D90FD1C
+:105600005BACFFE6FDF40F59FFF6535EB7D13E49A0
+:10561000CFEB76E2F79EBD7F4C7F18EBBB2D149F3E
+:10562000EE79FDAB5CE49F9E959612D4773D438066
+:10563000FE681FECFD2AB783D6D77AA2DB1F259917
+:10564000DB477BFEF6B1108F25CC0AED86D7A34948
+:105650009EAA5EB3513CAD67EF5779A176FF779D67
+:105660004FA5B67FD963677376227CB17CDFA7EA4A
+:10567000B7D73F5F8BF917ADFBE485F07ECAEFBE6D
+:10568000C9453DDAB393DB43DDE68EE7707FEE6814
+:10569000FDDC9566C073370A550AAC9B0DCF14A08C
+:1056A000DCF4C7CB371427BC527CF4FC5F830FC1FA
+:1056B000CDF59DDD6F1570DE5F7FFC21EA85D72D6E
+:1056C000C497FA7C3F6FA9257BE572F37698799CA5
+:1056D000E4FF9D790B812B99F728F33F37BD7F2D90
+:1056E00039892EE172D09FCFF73E44F597ED2E8297
+:1056F000F70AF9FDF67FF2F97F6BBAEF04BA3B2E99
+:105700003FEFF27FF2790F4CF737EFD7E8AE627ECA
+:105710004BD5EFBE21F8BEAD9E5BFB4F2EEF03CD08
+:105720005FB7EBD7985C4D99189F43AF01D669C519
+:105730003EB311C3856B46CC54D1CE14C3F62BF5C2
+:1057400072AF99FB4D22EE5B629C6F088FF331CDF7
+:105750008FA22D3D185A528AC98E959455DCBE965B
+:105760005CED6EC0CB9A6B17B82877888D3DEAC583
+:105770007ADA6417C5AFC3FCC97A81B905B06FA5E1
+:105780006B6F398CFE8D79842960C9A5F21896ABB0
+:10579000B5B8A459950D7E8F9263ACDB9CC6BA4513
+:1057A000EBCFCA38FCD624E6C7F8B43872BF8A7982
+:1057B0006DE218890950B7B1261FFA179624E3F74E
+:1057C0001B31C01E12CFBD5A3CF6F6E1716CBB1BFB
+:1057D000F138D244716B4A2E25BCB8FC6B789E8D93
+:1057E000D588D755ED884F09FD5F6E7F91DFCC34AA
+:1057F0007F59D2BA904698DC36633BCD4FBE2C9D84
+:10580000385DD2CB353A2D33D045A74304FA18E89A
+:10581000A2E3F9DBD2279C2EE1F8DF6F7612FE07B8
+:10582000A2974E9734C5CD505ECD9ABF3015FD4935
+:10583000ACA77918ED336BFE8214EF663EA493EAB1
+:1058400062482FF4DB02E0B7FD7EFBF31427EA7A0F
+:10585000E9D81D084FD96F456605FC756FB7B300D1
+:105860007E2FF965F4434B5B458AFB3329907757CC
+:10587000C8BEAF6EF797FDCA4EF329DD69F1DF06AA
+:10588000DF97EEFA2497ECB095BDE4D7F85E1238B6
+:10589000DD7D1DB9B8AF5B2A71FF239C5F62659EF9
+:1058A00027D0B93B7A0EC66D846D3CDFB6B4E51ED9
+:1058B000B3C5907F66D6DB915EF0BD2850BE13C2A3
+:1058C000179AE7A9FB1D9D2F0A1CBE36B31FF3765E
+:1058D0004BB7EDE8C6F853E9518B0BC3D255DBBE8D
+:1058E000A0FD8D29BF7AD9D141FEB668883FF4F377
+:1058F000FBB789C41F95AD15E487409DF8A2B2257A
+:1059000072FCEB72FE69D9AFF6EEF2010ACB7EFDB6
+:105910008203E35BA7DBB73AC8FFDF76E9B85B3FFA
+:105920003FBFE5914BFAF9A7F11FE0BFDC2087C527
+:1059300049B60D227F04E0CB8B94EFADF35BD9CB5E
+:10594000679FC33874E7CECF9F4378CBFFFBCBE78D
+:10595000D09F60AFDBD4AD889797DEA5389EFEDD83
+:105960002C99C79DBB5F7C81E29FDD1F80DF017F9B
+:10597000BAF79E4A477FB27BC7D789182F59BE779F
+:10598000DA609CEFF257A70C6611F4885E22DFFA0A
+:10599000AF20FE1A4EAF03AD07C8EFE9027AA3DFCE
+:1059A000D917B769A9E07130A716AFD91E39CEDD76
+:1059B0002F3ED37AD79D378DC7D2EC72B22B88D3C6
+:1059C000BC03741C7D05F4DBFE88E67F46A65F17EA
+:1059D000FE03E8B42C8C7E675B17FDFC197CD73A7C
+:1059E00068C0384DE00AF0A6C7D1BF27BB7F22A30D
+:1059F0007CEDFC25C5C5906EB7C144BB5F3E9B8E58
+:105A0000FB0F9F9A7BEFE7E7322C2AC61B4AF7BEB3
+:105A10004FF2D3FDEA118A53332D9EDDCDFAFEF00D
+:105A2000F8A3965359B5C5CEE33B1AFE31FEE37495
+:105A3000D0732DCEC3F9588FFF0C14F7699579DE1A
+:105A4000881EDFAFD8F2A1164F09D24B9884743A62
+:105A500076C9FD081D0F2AE26162681C33727CADB5
+:105A60002FDEADD10BE987F1CBBE3825D4D3306E14
+:105A7000E517DE6711F441F7661EFFEC3647CEA34B
+:105A8000D2E39ABF0A9753FF95C5332F07FFB7C5D7
+:105A90008F5F7652BFE178EABC10598FBF2DF37546
+:105AA000FFAAF7C5CA0543BE41B9C97B04F9B1A233
+:105AB000F598CCCFA5F0F352FA7C3BB5BCD1CE978C
+:105AC000448A77AD6A39407A3C5C5FE8FBA6E1F036
+:105AD0009ED0E0AD6CE3EB44E74EBB5F817E3AF7CE
+:105AE000EF267EAEDC7E8CE26D87B6FD5AEE08595D
+:105AF00057719DF087C0DFF9CABE5C1EB7E579EC2F
+:105B0000E1E39CD1F461D59EC8E3546DFFC2304EF1
+:105B100099AF45E6EBFDA5C73B2DB9EFC1FE4EB7EA
+:105B20009B19E6799E6E11A7473A17F5AEB66EEA55
+:105B3000E77E70BDA47CFD23FC5CCCF8B7A3281FD6
+:105B40007EF991E91FC6C463098487FE5A6B399FA9
+:105B5000B6FEC49D8AF46E3D72AF88EBD42EC46F3E
+:105B6000889D9FF74EF5143BE885BC8F3CE3915D23
+:105B7000C3F5CDC4A32603FC30CE605C07EAA11FA9
+:105B80003CA782F96E088FE8289C8EF088AA49B558
+:105B900009FDE761563C745E40EFD7AC1ACF03B005
+:105BA0000BE39CD84FD24C1E474CBE8B973EFD3C1E
+:105BB0004E7194BF0EE659A078D32CF07D927D7D76
+:105BC000C64186E7BF2651DE7696C5786EAC4B554A
+:105BD0007C26D0DFCFE46C5937D949F907D7584232
+:105BE000F30F582017F9516FD7EF7D587E421A7E78
+:105BF00002FD881A7C595A7EC210D621A07DBDC9EB
+:105C0000CECF270E55E24DF8FDF39ABDA99F3FEC8C
+:105C1000775E31EC9CE2E5CE27C64FC95F3AD405EA
+:105C2000FCB47ACF14CC5F8FBF277F47AA8A791242
+:105C30007F9E82E757E25FC81F930CF513AB1F9C52
+:105C40004AF5FFC81F930EF56F1AFF8DD7CB04CA14
+:105C5000572D583D7A2AF2EB55CBF92CC08851CEFE
+:105C6000EF40BC75793EBA7B9113F31F7A658E5F66
+:105C7000E6C176432671BCA5291FED403C0D357564
+:105C8000D4227FFE7CEF57B1A8179C4C25FCA8AC12
+:105C90005E45FAC1A349172F9147179E4FA6EB9374
+:105CA000CD8AF70184E391F923E85CE0332533AD35
+:105CB0003C5FCF98C7C0D478A26791464F84D31A6F
+:105CC000928FBF58F4C9FC5C4C93A6AFA6AA389E2D
+:105CD000E02B172F5EF7EDE17A50E74BED5C69C8DA
+:105CE00079C687105E9FE27DC892D0FF3CE31D1607
+:105CF000CF0A7C9F5C7C3E1DF95B3F9F187ECE9156
+:105D000049BDA648F65FB376CE7120783D56EF2A9E
+:105D10001C37F377CE9D8741BE4617C92E4CCD1C4C
+:105D2000BD627C82C4CF15529E439546BF24139713
+:105D300043F610A37DD61E8BE046BFB9E74195F42C
+:105D4000775AD16DE457F54467B4603E50CFC3FC39
+:105D50005C29664CA31C0DD9131340BF0FE4E05C13
+:105D6000981C9C33AE73C6717B2E3ADB3AA83F5524
+:105D7000EB0F0CB0C4E0B9E01E91EBE59E1A27C111
+:105D80003184F9F6E1FA7EA5E36DB518CFFD02DEA8
+:105D90005F40BCE878FFE5C0F47B45A3DF2B91E8CA
+:105DA000177EFE74BEC5FB6B6C7FAAF8D02A7415F3
+:105DB000C3CF9D86D3B54A6ADA88AE78E29E2F6853
+:105DC0009DD1E9367A852B411A64A0E3EBD8EFE840
+:105DD0003D5F98105E9D7E4F0F90EFFD070B5FCFEC
+:105DE000C2C74B9CD391E28DB4FE60102E2158CFD8
+:105DF000B5E6D1F8834D3CDED3BFBD10713ED07FF8
+:105E0000E6A5F2307355DE2FE0FFFD50BEFF10F126
+:105E10003F2222FE3F46BC03FE3FC6F65780FF4F9F
+:105E20002E857FDDAE2FD3F44219EE2B01FFFCC58A
+:105E300039333113C62D1415E2FF255B456D1FD292
+:105E40007D5B7262508F2CB9BE7A9F19F870C9B30E
+:105E500002F16991765EFD73ED5C4B785E5FF11C3B
+:105E60001FE9C9CBE7F7F9490F956D333EBF10E441
+:105E7000DB74CAC7F5F1F393A22617E1F83FA368D4
+:105E8000FAA228D6D02E9C0E43AA4D863CF0E429D7
+:105E90007DFD909F976472BE4FF1B53F9819C6077C
+:105EA000DC52FCF800E263BC3015FBCDD7E456EFC2
+:105EB0006FE80AE33A9FE1339EFBCB6A349EFB1BFB
+:105EC000DE9462687FCD864CC3FB91FE6B0DEFAF15
+:105ED000DB36D6501FD57283A1FDE8B602437D4C58
+:105EE000E01643FB7187671AEA13DAEF35B49F783F
+:105EF0007481E1FDF51DA586F7377EBACC50BFA9A8
+:105F0000F75F0DED038BB85EDC5F939486E70A7450
+:105F1000BCEC5F2A9B547CBE34DBA4E6863E4F7407
+:105F20003B73B1CC73A37F3590BC4CB126A785AE33
+:105F3000CFF9CC6CD06B53ACC67A8155E39774E043
+:105F40001720FECD56A35CA556CF6B02B39BA52CA4
+:105F50001946F9D2205FB758B97EBBC57A65FAED0C
+:105F60004E6C7FAA3240E7ECC3E54B44F9CAA2D29B
+:105F700047FBA9CC45F9961B6D463E4D1A40AFCC68
+:105F8000B31ACFC38BEA619B649013FDF9F9A8D0D3
+:105F9000E7C2E2DB286F67A07EE5A405B76E017D4E
+:105FA00029277BA9D49FAF9A638A9897F790F53BEE
+:105FB000FA491BFAD94F0F217EBB92DE7E0AF3CC41
+:105FC0002AE7F592BF946C31E22558770DE67954B3
+:105FD0004E7E8E50E5FFDC54D3782BAEF7FA3C179B
+:105FE0007D303311F303D206F09F5ED5E6F15C4DB0
+:105FF000C9AD45C3B03FD5147ABF457AA0AA10FDFC
+:1060000098A15A1EF453A6C8F94A3FD5FA198C0A2A
+:1060100014ED035521FBA0ABF8238704F3F8779325
+:10602000F7A7C8170B46B7E7F173CB6ED74CB2ABE7
+:1060300054825FD743E98AE729D42BE94912736672
+:10604000F48767F03C6F6306BCAF8F33B914AAF7CF
+:106050000A389EE5C78C0D82F1EAFF5B24F8EAF767
+:106060005F4FF93C16A59AE2A7FA3C99B6DFAFC795
+:106070008BCF26CD8A413CD65FDB776E8761FDAC46
+:10608000E26DC77ECFAE37D3B8F50582E1BD3E6F76
+:1060900069C31D741E2B5DE1F32E867923DC9634D3
+:1060A0000E57FD73024B23B8FEF7D243E8BFEC8ACC
+:1060B0007661BC0DF0B189E8EDCE3867D2270FF3D9
+:1060C000AA18A434AF21FB25B21FFA9695AFDB4C7A
+:1060D0009D9588F654F23546B8C5F566F20717C5A2
+:1060E0002A94AFE0AF59A1D1D538EF554933EF9C91
+:1060F0000BF0D4BD23324CFD7176342D3D04DF15F9
+:10610000B746BBFCCEFE78EF72723801EEB7106E68
+:10611000714321CD9BDA21DC3F17D83319C877DED4
+:10612000E944FF1413C37D9770F8FFD3CAE3C4EFAB
+:1061300058559A879C547CEB9641581691DC1DB5B6
+:106140000EB8CE7F68E5EBFC87D608EBFCE5EEFDEC
+:10615000289FD37E084BD16DD2ECDAEAEC507B1944
+:10616000F4D649EC57AF8B313FCEC57E07B6CB3C5A
+:106170004DD91997B7CBD01E43FED3EDB1BF5A8D81
+:106180007664889EFD4AD3B35F5DA19EBD80ED4ECF
+:10619000DD1B8868C724C891F5DC381BC77F952AAA
+:1061A00033CAE31B209E9F6D8B6C1F0EB40E5DCE19
+:1061B000CFC88CD6F954D7EFDCDF60C532ED2F9C09
+:1061C000D9E07F241BF729E38751DEED40FDA4AE23
+:1061D000F8830DF1ABE36D88CD884FC0A3D3C6F92A
+:1061E000C4698B640F96031E4D063C0EC7F603D997
+:1061F0008357ADDF4B8CE76EBA357C839E9771BCBD
+:10620000AEBB3ECEC3B845E5EC73A4E7AF7A9C398C
+:10621000C67544F7BF611C01E7DF7DD77F6B71B79F
+:106220000E8A17D5BD7A4D0CC6A72A0AFAF48695B0
+:10623000DB8599A407BB7659DC0867571CCFE7ECD0
+:10624000DA35F110C6393EAF399C2985D82D5DAFBE
+:106250001CC933437F5D3B8FE4499420E7277ED1FF
+:10626000DF575CFCCF3C8F123C27D0C76F56BE0E69
+:10627000ADB7F1F8C9D398C7369AB1F7A363F9FA65
+:1062800091687A1C9F47BFE3F3A17E7F5470E5C7F6
+:10629000002B26DD554C66ABE58DA600968F0A6E69
+:1062A00011E355BE91FC3C4D52161B9101FD284750
+:1062B000DB03088EA3A3D78DDB29EAA7EA3E2C0BCC
+:1062C00014EF02C47B5CAF2B097DFC37878DB3A133
+:1062D0005F214DE17AB7777E941FEF294A34B98F59
+:1062E00080AA67670E2F8CC5F77F8BE6F2F258D233
+:1062F00089265C8E7039A038D49B665ADF960D7162
+:10630000272F82EF974D88E77EE905987DC839965B
+:10631000C7E367091407B9007881E714FA023EB5AC
+:106320004BCC173316F4B089B955F00BEC9342EE11
+:10633000D9C1FF6876FC604DFFF6384D3E33E0452D
+:106340007619DBD509EE0C5C4F7781FC0D03FAB4AE
+:10635000D558A97CAD464D1806F2B8A72689EAAFF4
+:10636000D738A90CD48CA0E7FB6B5C548F36B5A74B
+:10637000D37A2C55AF9B87FEF5FD120BBDB723BC1E
+:10638000C47B568E87C8F9972EE69300AE2F353D15
+:1063900052FBD638E2AFA7C600D431FDBFFFD98A81
+:1063A0003F644D053D98FAA3C35953418E9F12781F
+:1063B000FE021E188E742E552F9F32B7C4A2A9F06C
+:1063C0006B1BF34D4DC2BCC8DE3F158E61CCF6E8A9
+:1063D0009FA64E1D09F3C7FDFE14C6F6DADEABC755
+:1063E00073D8A9FB3FAB8B81F9C86DFC3E9F8982B6
+:1063F000A756407D339BF30B933CB598CFD97337A9
+:1064000073E2FEBE3ECE5E1BB71376DBB89D3951FC
+:10641000E0FCC1E6CA5A1E416F6EE8BA11DE3EEFDB
+:10642000C0D7748F0F8CB72FD5305E2FC51107FAE8
+:106430002E75FFD7B48E5CE9773D1F49FC7C84C480
+:10644000F32BBAE6266EA6FD78681FBA8FDA2347CB
+:10645000B6D7DED2D68106EDBEB79F65F07283A6B1
+:106460005724C6F5FF6BD105BF47B961DE38DA5F47
+:10647000AAD3E209933A7AE5F9767E2F5C3ED413EB
+:106480004E78043C0FD7A5D13355601ECCFF486031
+:1064900033840228DD36CFDBD84FD2C24DBE97D130
+:1064A0005ED86571A2D9A3E3ABEE03D98AFA216164
+:1064B000CF31DA8FAA133A64A4F7978F7C4D71CB52
+:1064C0003A737532D56D171BB0FEB4BD7A23D699D9
+:1064D000EFEBA96F003F0CD6CEE1E313D463BB9082
+:1064E000E829583B57EF067ED865E6F52F1F394B54
+:1064F000FCB1CB5C3D9F8DE1F57A98EFAE586FAA69
+:1065000009549052FB65FDE19BB0AEB7FF92DA777C
+:10651000DB546E3F2ADE0CA47F5F5D85BA3DA42E5E
+:10652000F13AB3F2529F5FC581AF297FB8720FE78E
+:1065300047C41BCE13EFCDC375E98C7AD451EBA4BD
+:10654000B87336D7D701039FE9E753B798BC2C2A15
+:1065500044CF5E085BFF42CED9B1A88490FEB43828
+:10656000763A03BB342B186FCD642E2A87310F95F2
+:10657000D9DB96EE47B42DBBAFD5897A2B3ED7FA3F
+:106580008097E868F41F9ED0F4E2FAE8FC1BA301B0
+:106590009EF582778D887AF165B34AE72F3A24B267
+:1065A000373BB5358CAD3053BD5C3BF76D5EE95D77
+:1065B0003312F5EE2293AB19D7B30C4FBE19BE2F91
+:1065C000DB9DE1AA65C1BCE7B2D896C4B14A30EF01
+:1065D00059AF3FAAF1D946B5C986F7D2E8FB439532
+:1065E0006DEBD2717FFBB37D1F903CBD1F95417C4D
+:1065F0005CD17A44F6DA69BF4CC6F3299FD9FAD642
+:106600003F5AF7BE6C19740BEAF52FEB4D74B8794D
+:10661000203DF406E83F3738C8876AAC54FEC25DB7
+:106620007D2D9ADE055129D36C60B4BF90E9569157
+:106630008FE6ADB9A6C10A7CF482AC8E443E9B17AE
+:10664000954B7C5B162B72BE64B907DD92B6CF0DFD
+:10665000F5D43565D3BE533CBEC8686F546D5288BF
+:106660000FC00EC8473EA8DC60F2E17EA2C9DA4E38
+:10667000E77DE74531CD8F369E4F5CAFE93BDF6C60
+:106680001EDFBDDC39C592F351741E51AFBF1FE54B
+:1066900024BE28917CB4FF5572DE41E718BFFB3859
+:1066A00056C379C8FEE32804873E4E79701CD25742
+:1066B000E51FEC273FF88D6B757BD64D71ACE53B44
+:1066C000B4FC059B7B30F6F3B4A62718FAB18077AB
+:1066D00029A3AFEE9340CF1CECD333F90D53D390E5
+:1066E000BEC1F76C92410FB925A0D3C128ADEEFB16
+:1066F0007EE4F65161ED33F5FACC86A993FBC3F342
+:10670000B42D58B7427BE91B4B5F1DE1A373F5A184
+:10671000FDC5E9E3DF4BFDE9FC971AB5F0A00FF8E2
+:10672000EF60AC271FF37C7A673327CAE166498D97
+:106730007285D021358AAF3725E7AF35E03F88F73E
+:106740005C03FD4FD5380DFB8A8B8B96D17998541D
+:106750009D5ECCC7CF776DCA32EC27FE7F38AE1670
+:106760000EF700704CFD07C331C2305E108E1C0363
+:106770007C570B87183B6B7A06DA6B8F98280F28AB
+:10678000D1E4B366A25DF66F268AA70C673C0F883A
+:1067900029E30DFBB4997B2CF331FE9E29B1C3D2C2
+:1067A000589427B7B316D7A99F48645FC173AB3914
+:1067B0000E876E72E3FD4F2095D45F66B9B7821FD6
+:1067C000F2E6FB82FA3ED37095E5E3BDA09BA3E71A
+:1067D000DF188DFB66731EAAC23C98E795F12F3532
+:1067E0003083BC921DD2202C253BE3ABA8871B70C5
+:1067F000BF767014B75B04F670C3E1E448EFB9BC30
+:106800009E5BF3F0348C1B34AF745E8BFE53B3CDC0
+:10681000DFB21FF3761E53E8DED6AC47FD8D9950EC
+:1068200017D79968BD1463FDDB9A71DFFDC96C173A
+:10683000DA11CD68BF60FB4714F26B56D538D3F040
+:106840007E923A6D1DD8B276B28A79C1F58A1487E4
+:10685000EBDD2A73F55C3C7731EED18D0DD6EB5133
+:106860008FB91A07A9BC9E948CEB9A33D33A467B16
+:106870000FC868AE75A6A8B1C1FAF06FC0FA203D86
+:10688000B3B1C19D86FD2E2BD5FA3B88718A17E2E4
+:1068900034BC68EF33FBF4D2C606CCCB126B83F565
+:1068A000A930DFADCF723D3518FA47FB0BE6E3C3E5
+:1068B0007B057B874B744ECA06633B607EB691991D
+:1068C000B4DFD70C7A11EF2BEE1DC9DFEBFB34F2EE
+:1068D0007013EDD3607B5C6F6CC9BCBD3C83DF572C
+:1068E00020DB158A37C07A3015F39E14A6FF71F3AA
+:1068F000B8A4B68F1185F70184F0A375ED323AF78D
+:10690000691D66DC9F97D38C75897916A0BF27AA6D
+:10691000C6E737466BF94183580ADA6DC34D3E131B
+:10692000B61BC9FC545EC702648F8D621D541F8D57
+:106930005E63161E5B72D241AB71CC2DF238AA4752
+:10694000443B3171AE1E47F24E41BE74476B7661D7
+:106950000AEF3F7EC62CCAF7F569EFCD33863D318D
+:106960000DE6B57EC6DDCE50FB4E5F2F75FBAD4804
+:1069700083F9CB6821A2BDA0DB7545365E4F98E553
+:106980007E7A14C611DBCD26BC9FAD588B63166F83
+:10699000C84F44BBAC68DF5CB287D74473BB6CD1D3
+:1069A000FA19B277149EF79A4F767FFEBA0931181A
+:1069B000A76FB0B962AE47FEFD23BFDFF54AEDB168
+:1069C000E6C46B0A501E9BC1AFC6FB8F0E9ADDCA90
+:1069D00018E48B75C3C8CE6C8EF2D6C742BFCDFF0C
+:1069E000EA74D541FD6736F7F823384E43147F8F9C
+:1069F000F726216FF6EDF73F2F5C8C1E78FCF0FD3B
+:106A0000FE83B191EFF1BD43C35FD0FEF090DDD9BD
+:106A100060F6C4DC87F0BDCBE779D6EA89512F1147
+:106A200067FBB486E70376D6B85840E6F7D162BD77
+:106A3000A4683FDDAF5CD22250DC7C096B223D3A7A
+:106A40004C89D5EEA731E6C59616BD4DED4B5B7969
+:106A5000FB32D642ED757AE1BDB501831D3ACEF029
+:106A6000FD1DD1DC6FDDAC781F43FBFF9119D9C44C
+:106A70004FC06711F32DE207D877B9319AAF1F37AE
+:106A800062DBC8F628F163B87DB85CE0E7B307C203
+:106A900053D57993613D0ADE9F21D37AD4ADF9496C
+:106AA00087937CEB6F84F97F9FF54A24A7DABD2397
+:106AB00075825F42F9FABE33ECDE1B2D0F68BAA671
+:106AC00025FE43CBEFF93E6B79C30DFDDCCE02F41E
+:106AD000DD61ED9E1214A4487919D0AF411FDC3A54
+:106AE000C258BFDD65ACDF3929F23D7D6B6BD4B494
+:106AF000D07BAAD60E708EF32D8D5E577FDF120BE2
+:106B0000CFEB7B0BE95E81F994B47FC1F3FA141BE0
+:106B1000F3A01ED9BFCF46FB21558ABC1943165599
+:106B2000E0EFE2BDF08A9D9F3740FF17E3058A99A9
+:106B3000B70FDE97C4F751123C495A3CC3953463F2
+:106B4000D4B7871BFD2ACA0B96D846DC770DE627FB
+:106B50001AEFEDE88AFE380FFD6398CF6C8C4FE892
+:106B6000715A7D3EFF287F2C5ABBCF399C6E6B3407
+:106B7000F9A80BA3733DD23907DF73B9F952BB876C
+:106B8000FF29C143796889261E17ACB3B98E529C80
+:106B900044F30FEAB4B806F37D5DEF56C2EC9510EE
+:106BA000FF227DEDD7F5F539E477F338882D6A15A6
+:106BB000AEC30D36BD6EA6FAD3E6A600F9FDAF5AF8
+:106BC0009C181F83EFDD1867F3CD1D417E5D5D06C8
+:106BD0004BC17B0EDEB0CBB4FED6BD6A69C6F5D81C
+:106BE0006DF376DB42F249BAECEFD1F9A608FDF974
+:106BF0000CFD0DF976FDC1F8AD8877FDFD1BF6A7FC
+:106C00000222FFCE49F91B69ED1F7BA19EB8CB4242
+:106C1000714FFDF70FCACFE7D1FD8C7A7F13144E69
+:106C200087CE1AD5908F5D8E7A3707E5A09DF467E1
+:106C300045CB2083DED4F569C5F91B68BF2C4857C6
+:106C40002D2E21B5935EAA38FFBF68BC3B909E34C1
+:106C50004E12E9F781C74935E8E3E038930C70F745
+:106C60001F6732C1A18FC3DAA20CE79FEBCC3CAE09
+:106C7000726698332636821ED14B7183C970FF60CD
+:106C80009DE4B262FF75CA4E35347F287C5F00EF09
+:106C9000C56421F0D5C17A86C1720BF3525E403DC6
+:106CA000F6132207A2D9A562BF62C2F8E9F92EC67F
+:106CB000FE45B9BD107D7233F22DD88B3F583B7E17
+:106CC000950FEC49C9EC6947BA4A769313F3686BA0
+:106CD0001513C545EB92AC64FFAD12CA559473BD54
+:106CE0005FA9432238F47D8F81E6299F77D03CC38A
+:106CF000EF3BFB9F1B4FA176FDEE573B30D7930F29
+:106D0000FD5B54930B455D4E53D82721F40FEF479D
+:106D1000DA2045EC27BC9D8EFF01E96CEE70203D2A
+:106D2000BAE3A58879101B95EF9807312F4C1F27E0
+:106D30001CCD0EE0F74287232383F4E54605F5A535
+:106D4000FDCC9FDC4ED2CBB4EFADAF7FE684A9562D
+:106D50009E4F6CBC576F20FED3F1627DF341C6F3AA
+:106D600053BD947F72393C4882CB43FB007629E2C5
+:106D7000BE36584286FC384931E64F35481EE2633C
+:106D8000F34DD556DA27495B69C57D92D592330616
+:106D9000FDD8DE37C1FE83F9353A79BE6A78FF6BDC
+:106DA000F01E66B4731553C4FB79A306B0AFBA34B2
+:106DB000FAACD97769FE01F5E1C175372A4E5271F7
+:106DC000DD359B39BC03AD4B7ABF03E1EBD17DFCD4
+:106DD000F71B2C39563FAEFFE1E3354A1E4F3EBC50
+:106DE0006F047870DFAC31CD4DF86D542515FDD5AD
+:106DF000E81151CC1AEA6F65CCA2F767E2E3F1CC57
+:106E0000226B8C8F9C97A3E369B7F21DED1D6F1861
+:106E10005F0E7F8FE2E8217CD9A94CE8CF97BB9128
+:106E2000171338FCA1F7A65A338645BC7FB21F7FE3
+:106E300086F14DDE6446E7F70643B919FA6ED5EEE2
+:106E400043AAC0B50BFCF4F27B14A6C2FAE677E4C1
+:106E50005F4039C96BDFCFCFD1B426F07B1EB5EFD1
+:106E6000C3C75D62E7FEC812BB4A65CC51F72FF17C
+:106E7000F7375ADBA39C785EB1352EB21F9363D7E8
+:106E8000F3689AB473081DB44FA1B7CF9BC7DCCD8C
+:106E90000AC53D1BADE07F25F4B5FFA9B63F0282D0
+:106EA0000BE3DCF9DBEB9AF9F9513E7F8CAB62FB2B
+:106EB000C4C48E5C41FC0E74DBC60CF7DB55583B3A
+:106EC000B251CEE79ABC997618A7EA684722D65BFA
+:106ED000DF3E9D4E7E6F1DB7377B774753DCA03F6B
+:106EE0007D6AF979F2F329CC37A83FDDCAA500AD58
+:106EF000ABE5E7D3996F1CCDDB678D0BBEBFD3C26B
+:106F0000D8A4B1C8001C4F889F48F430DB4D067AE6
+:106F1000803C5E67D7E88178EAA3B776EF4BA77627
+:106F2000BFE071CD5F612AF7D7F5FBA58E67F7E566
+:106F30005BD07D5BE536F713784F0B3B2252BEE604
+:106F4000C229FCFEC48516770CDA570BFF53146A6E
+:106F5000697F93F3FD220D7F9DCC45F70EF8D6DABD
+:106F6000F8BE4E987F96F154FEB83FC2F78BDA44D4
+:106F7000CA1B5F3045F161BF79ED05BFC4FDF9E281
+:106F8000C6683A77BEF07BAE9368D72D7CC2E6C464
+:106F9000DF7B59FE41667E32F4BBFCC90CD507DFAE
+:106FA00045AFF024595DA0271FDB53887E45833011
+:106FB0007FBE3006FCCAC70EACC2B898F4CD94CFE1
+:106FC0006D507FF4B1775661BCE9B718E7263BF600
+:106FD000DD42B4635F42D0F4FD3FC0C14B874D5AE0
+:106FE000FDC4AAA9A0F2AF4D6835292AFA65275633
+:106FF000E139D9C438F718138CF78EFDB342EC6F22
+:10700000C113A3CE6D80F7E7ED17C8BE003A69DF64
+:107010000B374F01BBBB78B25E972D588F8F6686BA
+:1070200038BE3933383EDAD9AD7A7C8B45DD8C7188
+:10703000F7E305D55324E83FC3A1AECE19C9D8C4A0
+:10704000F5F9AA1BC6CF76C4DD8CF198D6BE7D8338
+:10705000F8D5181F6B65DE0366787FD3E3436EB601
+:107060000262E30779C6A830FF41D629ABA7DFF457
+:107070001DE46344BFF3590DF60492934388D2F4A0
+:1070800015FCDEC23EF94EE37CDB571FD1C1CFC3F6
+:10709000E8F5245E6F5D19595FDC12C3F9BA352A31
+:1070A000F2FB664D3F00BE03147F6D8BF60FCF08D9
+:1070B000EA0F901FEB2492A7755C7F801CCDB493E0
+:1070C000DC46ECEFDBCA6BAB76AF79ABE48EC6F88F
+:1070D00082AEC7308286E3CCB53B0DFA39AF7D0175
+:1070E000E9D751312A87C7C9F19330C5A84798B568
+:1070F0003D3B74DFFE77DA3C33AED3E33F013974B6
+:10710000DF69F98EFC4B9E9F2DC7387F88BD1D9C83
+:10711000C7548A67F4EB17FA736AFDBB72AE045F5B
+:10712000EA65F0154FF8BADC3C83FD19E32FFDFB4F
+:1071300093B57DC126E33A224786F3A4CE27807F0C
+:107140005388FE2CD6F4A99E07D1BD6B24E54F06CB
+:10715000C7E5E73181BEBFC4DF5DF2813E453D96A4
+:1071600027B96FC5F679ED712ADAEFC06FF51ABF4E
+:1071700049C86F3A9D5BE3AAF369BEEB04B24BFAD0
+:10718000D941DA3A9AD724D0EF990D9EE715E787CF
+:10719000C0A7EB7BE8BF55EB7F3CE7E767FBF8F95F
+:1071A0003E941FCD9F67AE0EBA5F3D1CFE852873CF
+:1071B0000921EBD5AB368AEBEB78BB5AFED7ED85D0
+:1071C000F201D725077D37F868C0E184768B511E20
+:1071D000505FB57C42F764B6B6890C7FB200E78D8C
+:1071E0007A234FD793BE95870A24B25B827AD94916
+:1071F000F68BAE3703566BB0FDB9B52B0BEB51AF29
+:107200006AF7ECC78BA0C5C706E1487370BB7792DD
+:107210009745FCDDB81CBB5DD723348F8D2B0AE866
+:107220005E852A6D3D9DD4E1A3785334E27142100E
+:107230001FFA7A7DA7A5E315EDBC97811FF53AD813
+:107240002595A6AC60FFF87E6608DFE739381F8415
+:10725000D3E7BBEA27C0830FF1F0430DEF0950C716
+:107260007B2D9804EB17E6FDCC505C6B3242E05668
+:10727000B83E4E104D5C8F5D462EE20731EDF7585B
+:10728000EC24CF417C70BBE5018716E7D5EE293FA2
+:10729000680239A17D363ECFEE5DC9D4EF6CADDD1D
+:1072A000DF4B2F6FD6F296747BB1E2B5D4CD46F8A2
+:1072B000797FBB1C1C2F7947DD63D08E19EE515CA2
+:1072C000E81FE4B5CFDC8FF924D97BF00704827C7A
+:1072D0009EDDC2E514B84BC3CB9BDB43FBAD74D83A
+:1072E0007539FBBBCC23FB28E757A4CB7D21725A11
+:1072F000E35038BE607E16C4A764D4A37AF9F7833E
+:10730000C3B31FCF2595033E506DEB786B6D99BFCE
+:10731000D286727C94B9508EBB5BE69B46215D3170
+:1073200011CC19A21FD6F379E87628F0650BF2E5A7
+:107330003AC7101A6FF85177740EBC1F8E7613C6B9
+:107340007D5BEC7EF423FC0EEF2E07E27356EF1408
+:10735000DC4FAD8CAEAEB5853CEF6BDF06ED898FB3
+:10736000BD22EE1F953FC0F8BDF1DA7CA0A9CF0287
+:10737000E355C820A759540F20DE5A65DEBEF73EFC
+:10738000FAA5115629F27BF960FDBE95F8F36D530D
+:107390001CD217FD24B493CB454F1AEE7BB2C11615
+:1073A00017AE03E07710BF1FB431C906FDFF1E4AB8
+:1073B000D4D3D3C4A5748E6B5A9640FB44BA7F8F46
+:1073C0007A0BFDA43BBF174DFCC82E3C380CE3D311
+:1073D00009D19C4ED08F55EBC76A1D1B94BFFF4847
+:1073E0001F49FE8EBEBE1D1404EAE7E04DD735D717
+:1073F00085F841D81FEAFF83C28CB4A5C8FF9A1F45
+:1074000047F6617C70DD457B65AC21CEE6D3E0EBD1
+:1074100048473E0AB547D13EEDB3677DF357DF0CD1
+:107420007A76E2F496005E715FCB8A6EFE17E86FA3
+:107430001AD8B336C0C33E8D2F0E66F844DC4F3DDC
+:10744000385CA0FBDC0F457973AA95E038895A5C5B
+:107450002051CB334F8CE2E50F62B81EFC3C86AF67
+:10746000D737A8BC9EE8881C4798ADBDFFA989EB1B
+:10747000F735F991F3D14F68FAF5AAEDDE1C21FC3E
+:10748000BEEE138E09DA7DDD946FC7E3FD0B34FE8B
+:10749000063B87E814B4ABF87E9D6E879E6D9F4DCA
+:1074A000F51382F7BD7B042C3D4F909FF4AE48F15D
+:1074B000A1E2586F22E6A55544458ECB0CD2F0F4DC
+:1074C000590DA338EF29DCCFCBE6BFB785F5251BD7
+:1074D0009EA47B1D4A999FE2BD451B1A68BFAEC89A
+:1074E0002F30A780FE9987C781353A946E110D71B0
+:1074F000E7C552B51C9B13E45BFC1DAED0F7259B82
+:10750000C619EA576F971618F23B827AA790ECBF1C
+:10751000F07E753E0FB74F8FD7380DF1EE051B8605
+:1075200017F2CD78DE7E2173D17C17366619EF1104
+:107530006E4CB8B27B82C11EF545845326FDA83F30
+:107540003F0EF8F785C4F7177C3A8CE0F88BC37BC5
+:107550005D8C018E68E633C4CF26F3DF29B4F1F8E1
+:1075600023F08FEF5276407ECC77F507AE1DC01F1B
+:10757000C8FD87FA037993B9FE654D02E5E04C9C9E
+:107580006AB4CF66C7F0756E764CB4C13E2B9A676D
+:107590006C37576B37576B77B9384AA85D2664A1AB
+:1075A0003EE3FDE9BF1F9571FA6DCAFFDC10C3ED24
+:1075B000D79FAA6E6F0CF4BB563B77D06FDEDAEF25
+:1075C0004AAD35F7E585525EE0E66F1EACC3DF09D4
+:1075D000E9DD01F63FE8C1FC67DFA07BBAF4EF6E9E
+:1075E0005FD132B408F054A9C973B98BCFAFDC15A1
+:1075F0009087413F29E51CAEB4967D8214F25D5A16
+:10760000096FB722C66CF02F7FA2D5FF35C649653A
+:107610005A49401806ED52366D1124EC0F7F570B76
+:10762000E049A966FED0DF934A19CFED9ADBC76F18
+:107630001616E604F1D0689A91A3625C3531DA85BA
+:10764000EBCC47AAB70EF150FE5180CE494CFCA8B6
+:107650005D42BBBD5B75D7237FEB78708A6A0AAE4B
+:10766000A3D11F71389BFAFC62BEBE30F6A86647F4
+:1076700037EB76E961C6ED425AA712578E30FC3ED1
+:1076800061629CB64E2432EF4E85DA3732A227A3D0
+:10769000F924AECC6EE6762CA7F7B42CCF167C3E40
+:1076A0006DF0C8B178DF47D6DA8084BF3BFEDA26BA
+:1076B00053C4FB519A35FCC33C9EC5F9E9F3B89C11
+:1076C0005ED0DB9907884FE8F2103D3DB2DFC1D8AC
+:1076D000E3F43EFFD9F87BE9FECA7A997E4F4EC7A4
+:1076E0007FB7EA6941BCA6B46C160837DA787ADC51
+:1076F0000E9FA35C1E978DE73A0794FB153B8716F8
+:1077000085CA7DBD4CF4D91C96E7AFDBF77F88E1D5
+:10771000EBEA9058CF3EC44B65DB3A8AEF2CD9C2D6
+:107720007FF76740FC5C21FE8412EE0794CFE1FBFB
+:107730005EF9CF4A44FFB27AFEFBACE5DB77F0B8E6
+:10774000CE8F990BF54379CB0EA128077F0773875E
+:10775000B028049FA9E57ECA83BFC6AECB1FD75B06
+:10776000E1FC8E7162B4530ED9B87EE8CC577CB878
+:107770001FDC69F69663BBCEE46817E677E9F8FF8D
+:10778000FD8E9BE9DCB57DA7258065A3A939C98A53
+:10779000FB0ED7CA2EE4AB6ED57B12E91327795ABC
+:1077A000F1FBD878BBAB16BE755AD85855B9723CA8
+:1077B0004C0CE38F893FE67293A43AF4BC86B12463
+:1077C00037AA9DEB2D13D76787CC7C1E3B1987F713
+:1077D0000731EEB3248787E368DC94F2009D1FCA6B
+:1077E00038BDD370CE30C85FEEBF7D1B7EFF3F2C0F
+:1077F000A14B2800800000001F8B08000000000043
+:1078000000FFD57D7B7C54C5F5F8DCBDFB0AD90DA6
+:107810009BF73BDC100C28246C9E0401D924848740
+:10782000206E0228C86B7947926C02D2FED0FA6DA6
+:10783000168331E56B6BD41645A92E8896B65A830C
+:10784000A2060DB82822D64723A58A2DDAA5202224
+:1078500084641BFBC056CB6FCE9999ECDE9B0D0F59
+:107860006BFBF97CE18FC9DC799F73E69C33E79C65
+:10787000991D33B5CDA88C22A4A69A38BC342DFD11
+:10788000E90EE98485900BF06F2221836C3221F19F
+:1078900084A43CBD4D522C58BE7F5A1CD6272605C9
+:1078A000BE4BD8AE8696AFA0A95B22848C25E4A0FF
+:1078B0008178CC3184B4E82A47D968FD9684487B26
+:1078C000132D3B667345DB687F96639D07ACB4EA76
+:1078D00098633EA38BF64BDAE9C76442DE3012129E
+:1078E00041DB1D8C60EDD36D74902242261B89070D
+:1078F000BF1B3D2314DADFC1A183B0BF97B7EAA64F
+:107900007A697BC320B2D81932EF749B0EDBA56C69
+:10791000DD21E9E8F7B8485A1E323F51EF015B59C3
+:1079200026CC67CCD44E8443DD563DAEA7C2E81CBE
+:10793000B66654B0DE68E88FD67BEDE64F8C7EFAF3
+:10794000FDC72FBD6F2450BF5572B4C1FC5BDF373C
+:10795000CEC9A1A9E7E7324920643A61FF36BFF0FA
+:10796000BE51A1DFA7EFA670A2F5EA76EFD22FA352
+:107970006957A9C5238D2624F3CC6B8B4821FDDEE6
+:10798000662211746EDD3657918DCEFBCD5D530EA0
+:10799000495184589F33F92015F021C49FE1B40662
+:1079A000E725523A30CE2F722AFDB310B246EF557A
+:1079B00099F0DD955945EBB7C630F8CC1FCCE042C5
+:1079C0002CEC7B155F97800B1D7F0A8C5F91E5DCAB
+:1079D00001FD542446D89B32619EF9AF9929DCEB16
+:1079E000EC923D82568D2B67F00C9D57654EB87911
+:1079F0006DC0F1E263D9F844EFCF807109F1B2EFC5
+:107A0000326921F9C1F67338BEE9771FFB4E863A19
+:107A10007382F3D7E26F834DC2FA61E86C11ACA3B5
+:107A2000F698CFC7E8AC530F749679E630E243D0AE
+:107A3000CDCFB6EA3115FDD5D98CD85F9D4D8F706D
+:107A4000D90C781A4C53032C9AA61BCC5E0F85C711
+:107A50009BF3261F9272297E6E31FA207D43B7B4C4
+:107A600016CADF4861E3B7E8746B21DF729785348B
+:107A7000215E1D6E98CF6B3747217E6AE71ABD26BF
+:107A8000DACF8F9F9758DE63F112FA67AD6BF6720B
+:107A90006847E222EC4F02FE5C078C73ACFDE94ABA
+:107AA000796EBF51A1DFA7B7B1FD27F050DBC6E863
+:107AB0004BEC0701D7203CBDAAFD24F0317FB08DEF
+:107AC000D105A5178077CDCE08DB49331BEB02012A
+:107AD000FA8C56E5EBDB936D274704F335F007D0BE
+:107AE000C10E628179D6F279CED3B9EE83FD5567A6
+:107AF000F61F3450D4161F0DE07E1F887E6BD6FF14
+:107B00003AFB640121AB930E612AF6AD61A87A7F3E
+:107B10006FE5786F8294B67B82D34D4D611BEECBBF
+:107B20009A930DB89F2D53195FB31C238E503C13AD
+:107B3000F243BEDE7BB17D4564DB6499C2BDE27178
+:107B4000C9D644FACF4FA4AB24E26CA3FD7DB6F5B1
+:107B5000F5A82500DFAF2EC8A498AE3782AD7737E1
+:107B6000E73B5D3B29C091DE1B8C24CC7A2FB73FCD
+:107B7000E23B22013C6B38ECBB9E2E1FFB29A51774
+:107B8000CFCEC1F6ABE892CF3E3DEBF64FE9BCBBA2
+:107B9000764CB4CB40364D4EA49F407C847D3BA5B3
+:107BA0009F38994C9528DE37B4BD1E358EB6FBFC48
+:107BB00097A3F3816FBFCDF7FD99E7E5F50097BB7C
+:107BC0007EF6EC75505EE395624D30CECEC7FF95E4
+:107BD00042FBA9DE510F10264DBF7CD5E8A7F574F6
+:107BE000DE6DECFBCEC136A8F7F913F75F07F06E38
+:107BF0006A6BC2F2334F6CC3FC6B3F7B76DF3F682E
+:107C0000BD5A67941DEA9D797E3FE2A5D6A577C04F
+:107C10007A07A2EBCDBBF6337ED926E17E2373191A
+:107C20001F13742DE8F7F39F2D1E1B2A37C4F71678
+:107C300023973B83981C39CBF76F4D99A505D2B399
+:107C4000CF44CC85F5BA8DFEEC6898CF2846171F37
+:107C50007178D4B6AD31B82DD81EFBF980EE7B48D3
+:107C600073287D9EA2F44E6BEDB85000E3FD0AEB45
+:107C7000D37A251114BE372F382EC17C22473518F0
+:107C80006A709EBF64E574D5A1E5C5EB183D6AE94D
+:107C9000E00B9B05EB8B7D90B2BB324D413E60B259
+:107CA000333ECED69752ED6AB2D2EFD7AF73D965D5
+:107CB0008AC7974F1F9E9C4AF33F1B211520FE65E4
+:107CC00089C9398F05C7A95B5F464ED0F9EAA2D9A9
+:107CD0007E49B011FDB5C807B631BAD713BD05F25C
+:107CE000FA00F289BA162E0777B0791273206396DC
+:107CF00015DB59AE8D09CE83B6B358301FC8B829ED
+:107D000007E48E672ECA1DC588F33D23F801F1E410
+:107D10002ECC09EEB7041D7101FE138C34B5307EF4
+:107D20005349FB4F8F2E4D8A2E0AA6098358B91648
+:107D30004EB7F0F21F453B92A2015E3B6355F260E5
+:107D400020BEF2DACDDD4C6EBF721CE9D00D740896
+:107D5000E3BB4EAAE4F67264AE940EF71C473A5C9D
+:107D6000DECEF8ABBBBDD4B88CA69B253217E6EFB0
+:107D7000E6F4047464A7F99BA2A3717DEEEBFCD931
+:107D8000C0A7BA39DD75EF61F4F6864EE701F8BC9D
+:107D9000B17DE43690075AF928553B11DF6E8A6FA2
+:107DA00093047AD6BAC3A067D555133BEC57F76E48
+:107DB000BE1F1A08EE07777BE572E82F356E9A5DD5
+:107DC00096502F999C4AF3EE5A5204FB2D656BD9BD
+:107DD0001EA00BD22E91AB205FEDDC0DEDAF8FAB73
+:107DE000B3CB9920F7B6279969FDEB471463FBCD18
+:107DF000E94A29F4E7A920B627216F70A13CDB9C52
+:107E00003CD20EF2CEEDDA887A175106D9A19CB891
+:107E1000F46BA1BEDBB3806C92C2ECE33D9203CB6A
+:107E2000BD91DE08DA7E7A3BD37FDCED6C1F9F13B9
+:107E3000F011A9A173118CD7FD828978A4209DBD72
+:107E4000B9670A93B32F9A50CE9E6D749013543431
+:107E50008F8C5610AF028E35AD993AA05B42669971
+:107E6000601ECBF83C5A0D4C6E44733990752F9BB5
+:107E7000C772BE1F9647EB786AE4FBAF95C9059BB6
+:107E80002717E4E0393E1E924502977374E8BAE57D
+:107E90003EDC27B54FB3FEE24C8EBCDB42E855E832
+:107EA000475A7A6CE2E3A66C3D20013349D95AA5C2
+:107EB000DAE7D757135F3D5DE7F55B75BE89B9A873
+:107EC00037DD82FC7C83916C97FAF7774F34E35B64
+:107ED00015B1CE3C09E4D7CD16D43FFAF6E9208798
+:107EE0002E02F4B87CC9DE84AB7016EA68BDD309F3
+:107EF000563BE0ED471C8E5A7DABAFBD460F9CD183
+:107F0000EAC9254369E9864173019E545FB798A188
+:107F10009D8DB6A7F512B68F7B6213F2AB26ECF7F8
+:107F2000F6681BEB27D659D8002C2ECBB98EC92763
+:107F3000AB3DDC7AD2A3859EBD284F07F433DB82AC
+:107F4000FBE1C7AF484B19BD514128013DB2FD418E
+:107F5000E8FE7852417A443DCADDE0F486A747B690
+:107F60005FDC54AF023D9BD2E35AA6275B08DB4F90
+:107F70008C2E23A73279007C2B549F15FB54BBEF2A
+:107F800005FDF6EDFBCBDCEFDD06B61FBB291C8043
+:107F9000DEFBE8FC6546E79B36D0FD48CB37D1FDDC
+:107FA000D814C2FFB5E71F98279C0704BF3D66732E
+:107FB00076005F746F7FAB19C996F347F7CB3FC864
+:107FC000BE98DE6586CAB45F33DDAFA1F463A6E078
+:107FD000B6E663EA013911B95EAD4789F4836826D4
+:107FE000BFBEB1DE3842D2A3DEC3F155AB737D0014
+:107FF0007C1EF4464A1124633DD31B1340E600DE89
+:10800000B6477A413F4E4820AEE7C2CC673FDF67B4
+:10801000029FE2FC9010C5EAF7F27DFF29AFF74F0F
+:108020009E869C4B703F283AD771220F2C8F443B81
+:108030003A2F2C17F3E93BD798D97C13EECADEBE52
+:1080400029048FC17D75753EE037EB5E9F7EA925C3
+:10805000388E908B5ABA81F983FC81F5548E1AB808
+:108060005EEB7E7E3ED3D07104DF5F7BA8B882B426
+:10807000D5E0FB2BEEC7355602FA222507472C9D8B
+:1080800057FDBEE16C1F8D086443FBEA58D74D31A4
+:10809000B4DF3193F8FEA0DFABE09CA0271E530CA9
+:1080A000E0DDE0F587E0F9D318D67F8FD5EC91E9D4
+:1080B000FEB823D6150DED3D65C4EE03397307E513
+:1080C00027B06F89AF08F84D3DF147019CC7585D57
+:1080D000F13140BF726736C9A2FC57F2E7C2F763BD
+:1080E0001151B984F6F371FB6F9F7985B65AF8CABE
+:1080F000B985DF03FA7A312203E8E218D5973B51BC
+:10810000DF560683BEDD4B94C1B630FC57A40BCCC2
+:108110003AB3BE20983F66559F2F447A4D0CC36FEB
+:10812000FDF914E28985FE099EBF7B6214F65D1F8E
+:108130003082EA567F3E8378687F1FEB48755B98F4
+:108140007137C5307ADB4DC8D470E5F7F171760F21
+:1081500065FB30B04DF2027FAC5EBFE1CF32E50788
+:10816000D5EBAC3E4C6931E86FD5368F4F47F3C73E
+:108170000C8C1FD17FB3CDC541B947EBE9C7030EC6
+:108180003CF4204BF9E0522EB79635BCF925D813B4
+:10819000AAF5C43C9EF6B3DCEC3C984A8B3EB32C6B
+:1081A0008F02B6BFF23BB725805C4A5CD0CAEC3286
+:1081B00064920DF45EC93143BE1079313D4B8FFAA4
+:1081C00031E29FE2EB8B18E74CC0F782C104F580E7
+:1081D00005B7457A3D217CD0CCE1A1A59B4FB87E67
+:1081E000A5ED7F766C1981FE3AA29C73813E16DC68
+:1081F000764EC5CFBA25FF538F025DADB1DA9F64CD
+:10820000DD653843E8FE3B62BCF33AC4534F5E671A
+:10821000F6FA4CA0DF40C68760CFEA30D93C0A941A
+:108220001B11CFA2DD9F1A29E3CB0EE6979E1E36C7
+:1082300019E86B19B13703DE97B544124F083F03B5
+:108240000518E8C37D9E603F4B3BDE3C0AFCDCAD7D
+:10825000F7239D2C355B108FEEF37A9C0769317400
+:10826000F9457B8AFB23518EDB607D9E7BC6479F51
+:108270001A493F26D2EFB87ED7EDF0FDA1C828E21B
+:1082800000FA784BF60EA7F3EF352B836328BCEA90
+:108290008D940E4663374E7388FE43D2AC6AFC77EA
+:1082A000BCF525CC67B9D9650439BEC241CFA73228
+:1082B000E0C957641B158AEFF1F28591978FEF455E
+:1082C0007CBF7F6CA4F41F661FDDC7E1DF23EAA536
+:1082D000B07DF27106A97E0ED26B684ADB7D3C94BC
+:1082E000E7F3793E9BD74B60F91D7C9F7C9CCBEAE2
+:1082F00069C7F1C530FE363BD6B115E045DBF98CD8
+:108300004017FB22BCA8B716527E07FC6D6D3AEAF7
+:10831000AD94AFEDC07AD9C4178DF54C28574803FA
+:10832000E57BB0CF8B1484CFA6524A27B43CB0D79C
+:1083300064DBAE04F12AF0A9C5637B8CF4EFC9C3FA
+:1083400051923ED48E42E5617B0CB3A318617FD27B
+:108350009918999E360CF18574225F3EBE6E8C6032
+:1083600078A0FBF4B518D47B7D39A1FBE504C79751
+:10837000E0671F0F52E3B58AE3E16D5E6F518C8DAC
+:10838000C94F7B00F7DDC731AC7E5C169343420FCB
+:10839000FF0387CB4D9A54C8953153D5FAC54D1C70
+:1083A0009F37C54409BC7E08F315F288F2175F3485
+:1083B000DD0F0B5E35217F211B03D9B0FF68BD6344
+:1083C000586E0A2C8AA572E426AADF18F3B1DD22C2
+:1083D00068DFEF3C3F4AD08595809C3E25D65318F8
+:1083E000407E4FE51DAE6B29A17C43BA34FE37D0E9
+:1083F0003AC994D6870C56D8F94EA60302ED8F20C1
+:108400000AF447E1FEE750B86BC73BC6E9E09F318D
+:10841000921EF19647F2709FBDFF857521EDF29C8B
+:10842000CDECD151BEFFB8CE7501FAE9BAFD2DD41D
+:10843000CB8F197DD9AD9630E546DF630F49C1F288
+:10844000C53F973D46CA2F767776FDE466BAEEA51E
+:108450009DB21D865C7AE75FDF1D037A75A7C10EAA
+:10846000E7462ADFEFD5C3BC1B981E794CA7A6832D
+:10847000B3DF559F73D26219BEA8DE83FA9CE03B3E
+:10848000427EDF4A7C57815C5F461C4648FFB466EB
+:10849000D50C42E1B7C2B20EF9D1E76BA7A11EBC61
+:1084A0009278B07C598BE14FA1F26145AB3ABFEABB
+:1084B0006175FE56AF3ADF677F2E0F2FDFA7C732F9
+:1084C0003A3E4BD93EE03FB0C1E4053D485BAF9832
+:1084D000D7CBA43CB113F82495FB60475817E1486B
+:1084E00004BEBE6E6F69E2C5EC7CF5E7AF21DE101D
+:1084F0007D23A837E4126F6CFF7ECB63158423F4D1
+:10850000ABF071E0BC71B62CFC3A26C60A3D651092
+:10851000F627BE8B7E82E345E13CEACF9B07988F2E
+:1085200005DB9F5D197E9C1BFAC6B1A9E464B07D92
+:108530001C936BFC1C2DE8A3FE7C127E1779A1070F
+:1085400007DBA531FD8AA4D94E4506F994B0638BAB
+:10855000FD704222E664B43BDDCFCFEBF65CB05F4A
+:108560009F003D08F6E314659F9F4E71D9F7C666DC
+:10857000EB8706F78B761D94AECEF843F8EEB25833
+:108580006B1C8E6B27761857D0FBA2DB2B06BBE843
+:108590007CFF786779A26B54283FF530BF8951E89A
+:1085A0005F16959C251A39BCACFD2DD4BBA8BE9591
+:1085B0000D4CE7D3BDB723BDAF24CE04A0F39EBDC1
+:1085C000C3335CFF86FC15F399E559622098A79B9D
+:1085D00098EEBF2A3E9F591D4CEFD3991D061CC72C
+:1085E00041145B021EA5D97C29F3D4D3FC84BEF9C7
+:1085F00083918E90F17CFE12B4A7F09DC053B2D44B
+:108600009504F336C1B874BC08E24D82B469AC5D20
+:108610008174A2E4D4B379303C4F260D69505F6772
+:10862000F6CB6C9D740609D0BE0F5E98B7F2FCC6FF
+:10863000D9BD8B56C0778B15F98891CF63472CE550
+:108640008766E42F6658B7C9E2FB1CFD643CF594CD
+:1086500029B88F3D4309DA3B06913602E35A2CE7ED
+:108660003CB0581BB149908FB0F5FAE0FC70CE6673
+:10867000F1E846239FDC190B7C527A6725E085F2EE
+:108680006566FF19A85CEFC373B7E073317C7E4D5C
+:108690009CCF2513068758E2C0F11EB0AE9C414026
+:1086A0008459D649D07E4BD454F4EF2500E0697943
+:1086B000EC54BD8A6FC53BD5F9C4B9EA7CB24B9D79
+:1086C00037D3933FE88B92CF99742116CF5923C0AB
+:1086D000DE62E0FCA299CFEB08A4743DEF713EFD91
+:1086E0008DF513BBFABCEE8E3112B4E32598CDD0D4
+:1086F0003FD557DE8B65FACA271E289703C8CFF3EC
+:1087000026B6F9C0AED37C8364BF8B7E6FB62A1BBE
+:10871000F494543DD32466C7D1DB4AF5B47C5B8620
+:10872000CDBE89E6EBC17E1D0BF3B7D53C8DF64976
+:1087300013AB4702CDE08FDCB6C966837A71E58161
+:10874000C946D08B5710DB761286BEBFA2FB86CE01
+:10875000F709C853BC489C5E220F29F3710DBC7CFD
+:1087600007FC9DC5F2138BE15CCAFE6575E4753AA2
+:10877000C0EEE090512ED677E4BD6EA1E365CDCE7C
+:10878000433BBCB39CF97309DFF76334FB6A5C902D
+:10879000CEB13C8FE7877570BB6E9C89F96B6D74A9
+:1087A00088626636C0FA718CFEED44FC63FBF25AB7
+:1087B00012FC07FD9507FB473E3429581CDC677403
+:1087C000A87CB3BDA996D61BA3F7ED877D3C8EA7E9
+:1087D000793C7DA3F40694BF9D3A8B62D4B17D6D44
+:1087E000CE0213865306B814DB7ED004FD4C907C79
+:1087F00098664CBDBF09A65FC5ED47D14946EF0657
+:10880000BA8EA6128A67B477FCF920D8A5E5074985
+:1088100001E0E98841C839079ED3157A1CFB1A3A52
+:10882000986C40FDFC2F932AF03B01D58CCEBBD237
+:10883000C61621BE0F2C5F75283F6AE364E437B388
+:10884000A632BF6AFD5CB3579240CE10E677D2BB2A
+:10885000326F0AB197083FC4FB0632775798F3444A
+:108860006D1CD34FAB66303B6FFD46A3CA7F531DD3
+:10887000C7EC5E33E3268F8C4379C4FCA779715C27
+:108880006F1B4146009F0AE1234550AFABF4ED81D9
+:10889000F88CBA9CF399398E0203EAFD9CDF08BE7E
+:1088A000EE1CC4F6F33C42D281AE679306E4FF8728
+:1088B0004B6F457E7313F118006F1F95B17802312D
+:1088C000EF5953D57AD21CA73A7FF35CAD1EC5F0A1
+:1088D00021C69DE7529757093D78AA5A0F5EF0FFCF
+:1088E000BE8A46B99AF854DD8521E0E760F600C0FB
+:1088F0000BF373E8916EDC1B993FBCBE3DEF8D38E6
+:10890000D8677712BECF7649CBD1FFB24B5A1182CE
+:10891000FFD45AAF047264B855D87D98DEE4347938
+:10892000F783DFC359831291BCCEE3490E403C4923
+:108930007E90BEAD65561657411CB5309F345BA482
+:108940001DF4FE165D3EDA655BA2AC2A3BFAA60D6D
+:108950004A05D413F658C544F26D9C6EC29D77D774
+:10896000C531FEBA59627671CF3C339E2BE3B39C7E
+:108970002A3F41BC4C8E829D70649C22EAA3FD6319
+:10898000B3C1955C4053AF44971117D25E261BD1FB
+:10899000AEA8E14FF1B176B4EBC70FCE413BFD9CE1
+:1089A0008E3CB42F124B84FD2A29D8FF9CD9DBF4CE
+:1089B00010A753DFB14DBFDC12A4BB7BE2B85C8DC6
+:1089C000249140AF7D76BAE74C68A77B5CE7FC5FFB
+:1089D000A0CB5AA30FED7121F48ADF07928BAB383D
+:1089E000BD18CA9CF356D0F9F5BC6BB4C3F9191D78
+:1089F0006DB4FFE7F744A39D515F45503E6D2C6574
+:108A00007CA407EC5F741D9F4557E3F960A3D48AEB
+:108A1000F2A33B6632D2F16ACB013C07576FA574D3
+:108A200018229F56EF50E76B48279EDF6B9FEE475B
+:108A3000CFC817051F76EF56B723C3D47C378FCB2B
+:108A40008B7CA77D56054C7DAE3D8B9DC3E9418651
+:108A5000AEA3E81D23B7EF2EB09D8A0056FB947499
+:108A600031FDADC77A5A66FB9FC983223E8E566E92
+:108A70001571BDED3ACABFE0FC2AF4B022C2F2077C
+:108A8000741D72922E38DF42DE4EE87F424E087C23
+:108A90009596105242F743A7E04F43C950C037EDB7
+:108AA0001FF78904914331D8BF07CE7DE3F878944E
+:108AB0001E3C20B73D3AB317E8AB596A4039690606
+:108AC0003D9FA69B2417CA8397AA3D32C07B2C6981
+:108AD000983583D61B6FEE8C0438513A39124A3FD1
+:108AE0004DC497B14B52D111967745BF1D968E84D8
+:108AF0003CF37DC4F498E974C5D04F05387E687A9C
+:108B00004062E7C829961FEBA1FDDBBA69482753ED
+:108B100089570FF3ABB0A9F13F25499D9FA6F4A358
+:108B20000F8CC37070784E1FA12E77087E47D4FC3F
+:108B30002E937C857A18F9C1C1EF805D21723D19B1
+:108B400001FA0DD544711F6AE9E0EBB86FDD6FF2F1
+:108B5000755C18BF490FB7135F4BFC2B9F96FAD378
+:108B600059F71BEBE5A4107A14FBE265038B7F90A9
+:108B70005E65FEA9123319E503FA2A647645B13F12
+:108B8000AE05FA8C09D25D31FF9E11CFE96C081950
+:108B9000027436A13DC22753BCE4F1FEAE05BACB48
+:108BA0000FEA23E25CD154D28FBE32A52CD45F7081
+:108BB000DF097DA4406A6BD267021FB9A709E61BD3
+:108BC000424F43E38B802F517AC27DDA4FCEAACB3E
+:108BD00035F426F02EF4E552D28074365BA760EAB5
+:108BE000AB5C85F2B5DC325B0FEDDFAC62F43609CD
+:108BF000E8310BEAABE9A5DCACCE6BE9918EA80BB2
+:108C00001D574B9F03D1DB10A037215F632F4D6FA2
+:108C1000D3E3BF757A9B1E7F117AD3D299E05FBBF5
+:108C2000226CE5A03FD7574B280F0ADE1DD604F96A
+:108C3000E17599A84FEF8AB6A37E5DDFC0CA0B3BF2
+:108C40001D32C4BD64ADE3E599CE72C8D7AFA7E5C8
+:108C5000B4EBA2232C2E66D89DAC3CEFAE86D7ADEC
+:108C6000A0677858FB973F6F96A368B9B799B72F5D
+:108C70006D2D877C7D0B6BFF19F8A946437C9AB755
+:108C800009BE5F7D6FA69D1DAB99FE3E91AF7797A4
+:108C9000F4DCEBD8AE95B55B75D03C88E0F99FE984
+:108CA000E5D7F1754EDCCAD61977E2FAA90AA58B89
+:108CB00015010FEA6FA774B5C5C8DF06383F974A9C
+:108CC000AD69904EA1EC175287D9DE220F657ECC9C
+:108CD000ED74887BE299FD45F8FF20CEA032449FD9
+:108CE000B8279ED96345BD84188A01A08747ACA8E0
+:108CF0005F0BFFA4EF212281BC8735723D24ACBFFE
+:108D0000724A5603EA115386083FA55FBF948E9BB3
+:108D100077E18BC9E1EC433FE2E39EE671137D7A94
+:108D2000B237530774B10B88240580F4DEAF417F5E
+:108D3000DB057E4826A43CA404F0CAF25BE37FBDB9
+:108D4000A9653C85AFAE41EF01A1962161DCC9CC9C
+:108D50004EE21B1CD57FFE53F4C467C4382636FF91
+:108D6000954D541E23D1317E3687E38F8CBF0AE99F
+:108D70007736C7D3CF057F2A2005C09FE670BCDDBC
+:108D800064A67A34F2C35683866F3C130F726ACBA3
+:108D900080FABBBA5CC357AAF9B82BB9DE7E2B099F
+:108DA000A07E724AF2627A7A0BD3DB6B2C4750BFFB
+:108DB000E97984E9EDB5C48FFA8FD6BE59B3539DD6
+:108DC000AF6B53E7EBDBD5F99E1C0F8ED3B3A5AE8B
+:108DD00018EC8AD50FBF8B76EC6AC15FBC6AFE4285
+:108DE0001571C65F1EBA06ED51DF986F3C4D4F6F8F
+:108DF000C5AAB8D0DF029CFAEC352FB2F81437615F
+:108E000076821EEB88F9704E251A79A4E527799CA5
+:108E10009F08FB86E02F7984C9237A8E7DD7418213
+:108E20007C5CABD7F5C473BD979FD384FE9307FAE0
+:108E30000FD0D3350D48644139647FDB2487C89F48
+:108E4000798566C073BE99EE6780976CC971595475
+:108E5000F4F005CA9981CF7BEA720DBD88F3D62D57
+:108E60009C5E668127858EFF7BC981E7BAC3B732D6
+:108E70007A99635987F4FAD16A462FE2DC77E5E7FD
+:108E80003C87FC4DCE797D741241F55E9A1E4917E0
+:108E9000E77CE68FAF97181DD4557DF818E8CF8290
+:108EA0002F1C6E24F1FA103ED134CD64063B4A9358
+:108EB000819D83AAA67F5CBC3484CF38224A1313D9
+:108EC0004059EE8847FB6C5DA47A9C66A9F3BB7F92
+:108ED00080F3D24F23D14ED4FB304195A477EB7071
+:108EE0008CDB3E6B607E52319F550777EEF3C37E7D
+:108EF0005CFFEB083D959F3592F7C55A5AB6C4E41E
+:108F0000CA86716A743E23B36376A25F578C3BB006
+:108F10005DD683F2D5F81A93C3016910C6E1D2EF8A
+:108F2000D9A1FEB5D1898C4FDF11EB2A48880FCA31
+:108F30004B613FA45296A4C604FD26C1F8066637CD
+:108F4000F90B715C32BE6163887D9EB60F1B8F5634
+:108F500096C0F8F5F729CE61DE07A31DE5309FD353
+:108F6000DC8F7B9AFBFD4E47313FE0CCBEFA2C757F
+:108F7000F1F434F7139E8E51FB8744BDA509CC8EC6
+:108F800072B2D16CDEA807BF3A316F1C4649EC21A2
+:108F90005303C6932C6078EAD913BD6D5388FFA59F
+:108FA0002EA1F4FB309F7FD89C3743BABCF5B83173
+:108FB000D40EDF23B1F3770FA7979E08968A71EB43
+:108FC000122ABF0F78EC99E7473CF6E5C78ABC1335
+:108FD000FBEF99C0F86B5FFE3B2C4FB8DD43D8F533
+:108FE00007F2F769FD7B54D0B0734004B3CF6BFD3B
+:108FF000F30B053FE3FEF9059C1F2DEC607E8245D7
+:1090000066D29C4ACB177724B2736E94275BE59F98
+:10901000F7445E513C86A0CB9EF4CE3E7FF62321E2
+:10902000FEEC3AEECFAC13EBDBAD5EDF0309DFBA4B
+:109030003FFB818430FE6C6DDCC38BA0470C0BE2E0
+:1090400061AD8DC1AD42AE2D077B6FEF728271E8CD
+:109050006BDF5AD604F6E0B53F000B2AF231D4A7F5
+:10906000EB389C075A57BC534714959D7D105142CD
+:10907000E69FEC8A51E551430F89034DAD4E51B542
+:109080004F6F18AAAA3F64FD35AAF24C4FBE2A9F23
+:10909000D572ADAAFE55AD65AAFCF087AF57D5CF06
+:1090A000234307A3FDEC900CB62172B5B74A553E99
+:1090B00072E72DAAF69F9186CDE369BDDD42FE7968
+:1090C0001C9DA38A8371CE396D4B55ED9BA4B6626E
+:1090D0001FF0469FE49368BD151C5FCB3B99FF6270
+:1090E00074FB6A55FF67A3D83D18AD5F96762EA333
+:1090F0001ED62E9147A4FE7EDAEA8EFB9B21EEA8B7
+:10910000BFBF96F24DDA6E353DBF80FEA6D56F8E9D
+:1091100026703F5D0A496174ADA50B0BEA7FBD5B0C
+:1091200065B427E691EC87C623BC0CC4ABF4C75FDB
+:109130002F6176AEDEA7AD7688FF59F5D632A4470B
+:1091400053929A2E2214355D448E50D385D5AEA607
+:1091500083C1256A3AD0C23DDAA1A60BE2A7FF433C
+:10916000E02DE02AE01E3B554D375A78E79300DAB0
+:10917000D9DD5EC9EE2361FCE2EDDB705D97D21FA5
+:10918000F5896AF8161C703459106E2CBE4CE861D3
+:1091900026AEFF68FD1342AF894BE47A15EF47F81E
+:1091A000179A250FEA517DFEC2125F862F13F4A78E
+:1091B00006C2EC44CEA4C4F07646FC3E909D51C05D
+:1091C00075F620262F6B8803EDE12B880BF9DDC99E
+:1091D000CA5BD13EB4CAF263F4BB9EAD627A52352B
+:1091E000F1229FBFE2B802AA879210FBAB168E5203
+:1091F00087E4B302BFE1F22085740879E0C27813F6
+:109200004A86E662951F47ADE782DF30847F09BD5D
+:10921000578C27E029F89A18CF441AE424D8171A53
+:109220003E474668FD486A3B8DB0F3E06021FE2270
+:10923000AD5D26440F6E91E938F290CC2642F1578D
+:109240006073A0DDAF8874CE87EF25E6B626BDC279
+:10925000ED1357933EFBC480F2EA12FEE8591EC993
+:10926000FF68667F3FB4F06BD3E59FF8036D3C5E0B
+:109270005210EF552F0F8F077AEA6FA7B41F7D8525
+:10928000F623EB02B1A1F6C3BEFB06921FD7731300
+:1092900071DC4D42F41037699B3C3F13ECC4544ED3
+:1092A0004641CAEC58A45DAB07EBD18EACA32B01B1
+:1092B000BAAF21217EDACC6039E6E5FE7911377448
+:1092C000297DE242A28DC73FB07827C2F9A0385F5E
+:1092D0000E749E13711470CF16FC21224EA8399182
+:1092E0009F8373492EF44FF7DBA644B41FD0FD29AA
+:1092F00085EEC7BEB8222CEFB71F35EB177114B23D
+:10930000B510ED42CB42D77B19F0107ACB6FA83E57
+:1093100080F7341215A6D70D3AF681038A0B3B5518
+:10932000719EF5467A80017BC18B3C8EAF4DADAF0F
+:109330003F9BC8E393F839E752F01A181F3CEE4EF2
+:10934000E0E332F530117727E0F8427FB8EF51C102
+:10935000B5EFBCD807F73DE1E02EE072AEA8F329E7
+:10936000C0976C3D9200F0EE8872EE83FAE947FDFB
+:10937000A7245D705E157217C6CBF6B6CB783FCFCB
+:109380003D81C55BB9F7C8C81ABA3B4CE837AD6E2A
+:109390007F1DF5C2AE46CA68A91E76A6910EA9BF6A
+:1093A00088BD4003EF81CE47623D1F68D62FE2752E
+:1093B000E83A7F7F0938FC3E1C1C2AE45183E19E79
+:1093C000575F9C913E905115421FDA756CE6F4B0E0
+:1093D00056EF3C01FD1DEF4CDB0CFD55C81D07533E
+:1093E000003EEB24BC7F35D1C4EECB26F3FB7425C5
+:1093F000FE063BDC374E4AB3E0FDA9E1DF919DE07C
+:1094000017FE78DD6D31704F4CF43F5CD2E1FD4EBC
+:10941000429EFBE48E42F0572EB06FA2B98526160D
+:109420009791F9DD485F16E523AF1A8919F6A36114
+:109430006803DE6B0944CB68B78C93C924A03B3129
+:109440006F711F567C87FBFA70EF527C9FD81428EF
+:10945000584BD30E4E0F62DD13CB03050D9620FC47
+:10946000455CA6163E5B383CDCF1C666D017BBCD2A
+:10947000E2FCC95262D3239F596766FBE6D855E2E6
+:10948000FCEDB3C2B9D41DE1183C06F6DFFB32791E
+:1094900092267FB1390647E3FA15D4C7D7D958BB0E
+:1094A0006E1E07BFEEA3B244885F8E6F0A1F6FA6C1
+:1094B00024B1735C2DF7EF8BEFB57A1FC68DD542C3
+:1094C000BC7641F0FB95C66B8B78FC01E110AD27B3
+:1094D000FAD178EFDC79B17AAFFC4B0E7BBEBE3EA1
+:1094E0004927E20FD1EF4DCF5B61E30B4B93D8F9E6
+:1094F0002A1807E8C77BC37DF1857B4A13C945CE8F
+:10950000FBEEF30E55DC9F8837779F9F84717EFDBD
+:10951000FAA5FD2996605CE140F0DF92C8E6E58699
+:1095200078BF82D0EF0AFBDE374E1C8FDFF347C1D6
+:109530003EFD45BB8CF7EA7F714837757B9879D73C
+:109540002731B85D13AFC77D33D2471CDBC28C2FE8
+:10955000EA89FB35E29EAA767EBBCBFC8B60FE10CF
+:10956000471C6EBCA59C8EC4BC77C7307CB8F799ED
+:10957000F09E05ED17E3BD77C7F857E2BEB0A9F13D
+:109580007C3BB7D7ECBEDE9F81F7BCA6313BC34026
+:10959000F4E08D72FD04F5D89B69654A3FC5FA0673
+:1095A000C916B2FF2E450F41B8EB5478ED0F772363
+:1095B000E257F4FBF961BE4F89C302E7B7255CBEF1
+:1095C0002DD95183FAAF381F7DFEB08CF1179F1350
+:1095D000E627F9BC55C2F3CF521721EB291F5AF9E0
+:1095E00064413388B92549845C17C3BEDF09E94665
+:1095F000B59F7CF9BDFDEC872454AEAE200D2857F5
+:1096000056FE58DDAE9ADCFB67D09FB4FEFBE1DC72
+:109610002E27D6B139899E4740EF2926C5201FD66F
+:109620003EF985314A19781F9CA67C77981EF8AFC1
+:1096300019D3AE461BA6BF48723C9644F1B727C962
+:10964000B50DD29EF759FFBDB5BD4C7E6C8D43B9AB
+:10965000D564FD2EF2757908E3EBF7C03B09141EC3
+:109660002613D39712740D7214EA2D5EA487E3F1CA
+:109670006BAA6662DE9E04741FF7CB295331CEEFCE
+:1096800097910E80F7A652471ED8253655B27B9982
+:109690006613F3B37B7F31F63570830C6BBBBF0C65
+:1096A000CEC1B68EFD3EB0F7B4E8FE7C10E2575A4C
+:1096B000AE63F18B093AFFFED490F1E223BD49E09D
+:1096C000878F1F69C4388F38B934AF21245ECACD63
+:1096D00071D1DB9E8576C21E83B01BB645E0BDA866
+:1096E000DAA183818F5C43189E45DC1BCC2154DFBB
+:1096F000EDA27084A04B91BFA64DF219A2F0FD120D
+:10970000F4E3D4DEE54B980F72EAE77AF48389F943
+:10971000C5BD9A5C06FE2E219FE64B366647E3FAEE
+:10972000FC3C22FE317FD95C4E27F3B81E3F3F92AE
+:10973000C17B29B16740BB5BCC244A47B7D4FCF25C
+:10974000B6225C678D211AF405E1F71958CF086F2E
+:10975000FF723F6565F78DA54036747286C2E76279
+:10976000FB30C0F9B23B9BDDBB23C38803FC8CEE0E
+:109770007DC3B7817DC23488F9AF297F3297E4A3D6
+:109780005E6D8673D4ADAF44F0F8222FBF4FECC8A6
+:1097900083F89CFAAAB47C8C13391AC07737BA0DB7
+:1097A000FE0CDCC794EF4854360EDAF2FD197AB895
+:1097B000AF9942F5359A2FD9722FCB0FF5AFD4D18F
+:1097C000FC922D4FCDD0D3FDE1BEC67F0AF2355BB2
+:1097D00076B17CBE7FA54CF3CD5B5E65F5E160495B
+:1097E00009ECC12D07677868FF67A2B9BCB7FBF128
+:1097F0009EB5FBE5E1BA503B6B6332E35B67B89D16
+:10980000F84C26595C05F01E11BEFEB2641D0F5ABD
+:1098100069C554AC57B42749E1DB25F3716EE5F710
+:10982000A32746929608E6B7F344513C1CE8188EED
+:109830007EC7AF9362989E6EF3E3FB38A21F014F81
+:10984000D19F187735C867E0CB9A78ACEC64863F37
+:109850003ACE461C679883DD2BAE4ACB03FC51BC45
+:10986000E939DEF4ECFCBB8DCD8FF61B9D8B72A02D
+:1098700000ECF807BEA2F53383F3D6D24941329308
+:109880002FB736317F6B203A0BE96962247F67A5D9
+:1098900050BD8E660E87C6E4687E6F46C02B51C2EF
+:1098A000719A381CD3FC78CFF24AD75DF11F5A77F2
+:1098B00008BE1CF05ECA81F6ABB7B3F5C4F07BCD31
+:1098C000FE8C18D4F7EE57F5776683A67D09C1B8EC
+:1098D00036774C16B6BF278298F13BD9DED72E33A8
+:1098E00097E9ADA0CF8A772C88E73A12EA47EC7B5C
+:1098F000AFA28DC56706D739A390AFD3C6D769632A
+:10990000EBF4AAE8951C0964CCB6F6A7E33EF8F799
+:10991000F5372A9FF7A7DAE7E1FA837D3D105ED697
+:10992000733AF9D6F022E6A981671F9C35F313F04C
+:1099300084FD8DED46A9E952CCB326599C9335FBA5
+:109940003BF31B8E57CADAD5DDCEE2B989A2A6EB6E
+:10995000BADD993A882B10ED6AC127101FB4FF3D7C
+:109960009ACCED8969246D80F8C4C7938BC2DA0D57
+:10997000F1BBF69CD813CDE2D5B5F68A9E787B274D
+:10998000DCAFF49C63EF0A8CD3D86FC0CFF49C2576
+:10999000D82E285FD4F9739C3FF6B73F0532607E1E
+:1099A00085A6B2E7153BD547B61C437E5D38B8ECBB
+:1099B000B64C9A7F35F98FC8CF0B53CBBEC8A4FCE9
+:1099C0007C7FB29FE547967D3114F25BFCACFE4490
+:1099D000C7F3C0EF89C73F63527250AF782D59412A
+:1099E000B8C9E53A027464022586AEC7F4AA09E351
+:1099F000F6045C074A0B4DBA8670F76FDFEEA307DB
+:109A0000E65729813F15B0F3713B805FAFB203F495
+:109A100044B17BDF3D7BFF8EF75D3E487675021ECD
+:109A2000EA23BB1665D2FC5D919FA01F4F72D03D0B
+:109A300001F615C54616D0F94A5D9B9CA03F91D50D
+:109A400076B31EE1CAED5E748D1728FC5ED9F7F37C
+:109A5000EFA5B2619C308FB19C0FD4EFFBF26FE0A9
+:109A6000F7AD3F63B183F97A6CC796DB40FF1ADB31
+:109A7000F1F6974C0EB3FB3962DE63C1AE49BF9776
+:109A8000B49B70FE633BAE5E01F5C7FDB6230BE8E9
+:109A900064C2315F13B0859EBD2FA5AAEEE590CFBD
+:109AA0002E1AD739A0DF4DC0E353AA540D4678F4DF
+:109AB00032787C85F167DDF1879BFD68FC54DF7FA0
+:109AC000A2FA3AFA917BC9203BF833C47D7AADBD46
+:109AD000F468255D1FFD3E21406710A24F4F3C6F8B
+:109AE000A68C24982F25D1AA7CB9395955BFC29686
+:109AF000A92A9F9274B5AA7C9A92A7CA4F1F315681
+:109B000055FF067BA92A7F63C93455FD4A47A52A1C
+:109B10009FE76B53D52F38D4AE2E3F4264C043FE2F
+:109B200051FBEB90169D74A0D9B5F874C3EB908EE1
+:109B3000FD0B0387D65E7CEDF9B6D7E1BBB0176BA2
+:109B4000EF3309FBF1CDB2C56B0C6F274ED2670521
+:109B5000DF1F9075EC3ED318ABEBEA94A2E07DA634
+:109B600089602FA648A8587CEE47E3004F0B983D2C
+:109B7000ED282006E3BEAD68873C6A6878E60F2CC6
+:109B80000E201DF8DE84C05CD5BA279E77A9D65D6D
+:109B90004A6ED5E0698D2A5F61BB5D557F4AD2066A
+:109BA00055F934E5071A3CDDAFCADF60DFA2C1D347
+:109BB000360D9E7EAE2A17F4DDC1ED5AFBC01E4560
+:109BC000D3F1FECE72C0C375A703888F92CED67232
+:109BD000C0D3B547DB105F853E6739B0CBE2430D9C
+:109BE000AF43EAA3E73168F75A6312A6071A15B420
+:109BF0006B1D6C1C81E9A1463B7EFF756309A6EFD6
+:109C0000343A307DAF712AA69D8D4E4CDB1ADBB005
+:109C1000FE738DEDCC2E16DBF7DE453AD807BA750C
+:109C20007E377882173F927703F0CBEE41FE6EC805
+:109C3000DF45EC374CA2F925C044E8BEFC294F377C
+:109C4000A43A028057371CCA8A82F1186D3A471E1F
+:109C5000E8E177A44CF8A13E9D90BB3738936CD1D6
+:109C60002C6FA6794436C6B34DF8A18312D73320A2
+:109C70004AD0A933E106C8F744B07277CA841B40C2
+:109C80000FFFC6FE73473FFFF91D2961FCE7CF9C1C
+:109C900056AC60D739FCD5702BC0E330B76F39486C
+:109CA0009E61094D4BF5790690B34707B8B7F08030
+:109CB000AEB409E0D0A6B3CFC178EFEB0D04E8B79E
+:109CC0004A62E75F51CF95CAE441CF0D263C4F1D54
+:109CD000D13956605C9914780CE0BC3DA512E1DEE8
+:109CE000630D6400FCBC294E968F0F3C26D943F2CD
+:109CF00006069F07526EFCB6E1F35838F83C9162B5
+:109D000063FAB6CF910E7A80C81FA974D4C17E3E83
+:109D100052EAB80AEFCF384D6CFF3AADDEABD03E19
+:109D2000E4289A1362E719926A60F7D1E16222D8B7
+:109D30003B6F91719F6BE1392195E97B482770CE8C
+:109D40009C1789E782233AF69E81B6FE020ED7B3AE
+:109D500083C2DBE316A632BDA26C56DD332FD0FEE4
+:109D60007AD64560D73DCEE1A88FF53450E82A3445
+:109D70003DDD708E959BEC1C24E8BF9D0F7FD1F2DA
+:109D8000673A6EFBEBEF68FD4FD645DA5186D8AEE9
+:109D900041F8DDC22B2F8C35A3FEB4B02ABD0CE4F4
+:109DA000E27CEE075C64D527A03B501F6D8427172B
+:109DB000975BF29A2904C9CAB84A233C25559DB637
+:109DC000A619D2D5C3EE37C21329B5A37635831AA7
+:109DD0005B47B77011F23FFFBB8D745E8BD7CB0A28
+:109DE0003BCF89FBAE355714CF22E8F7088F3BA253
+:109DF00040C0F3EA220E6FD16E1187D78914AE3FAF
+:109E0000E6909C0B6A3FD66740EF5D0BDFCD1EC02E
+:109E1000CFA02EE7FAE3074636AEF6FD1231EEE2AA
+:109E20005476FE3A62A49409FAE42D4C0EE4CEFD79
+:109E3000E2AE22BAFEDC0E9B0EE31516D7BD00780B
+:109E4000E86DE778349076D84FB33C4B3EF91D224D
+:109E5000264E758FF752F2D2DE692B0F9597857ECD
+:109E60006779A8BC2C09B496835C14F251F84F7D35
+:109E70008DD59C2F37203F3DD0B81EF3071B3D9852
+:109E80001E6A6CE17CB915CBDF697C98F3652FE71E
+:109E9000CB3BF17B47E35C4CF735BA583ECA19958A
+:109EA0000AFBC4ECC2F8C437B69808F8E77A3B4C12
+:109EB000189F4177C4638FC641FC9109EF716AE333
+:109EC00090B47CBE8F1E76F77B372505C6E98B1FC5
+:109ED000027D71C8C0F474982856E04BF98FFEE4F7
+:109EE00006D0AF0F2B8A15F4E982D4CD2CEF50ACFD
+:109EF000069A2F7C94E75D8AD504AC22F521E45BB9
+:109F0000873D8A3582E68B1F7D88957B093AF3C7AA
+:109F10003DBAF5060FF059221D80FD516ECE9C44CE
+:109F2000C50595D7A507605F4C495A3209F6C5CEDD
+:109F30001405E9639AB2E100E4A78FD8A687ABFACB
+:109F40000E4BDE4668571657A9877693D2D66C8497
+:109F5000769387DDAF0F6D3775D4AE8D909F61DF3F
+:109F6000A607FD7427F0B1F8603F222FCA059F169F
+:109F70007172A33B9C280F72DB9D280F045CCA669C
+:109F800057DE0DF6CFFA76C926C13C664B7D410AF5
+:109F90001093E886F74929BFBE3EF597D60DB45D0C
+:109FA0003DE4AFC5FC0F377CBBFCFBA6D430FCFB0B
+:109FB00043BEDF41DE43DCFB8746F60ECC331C2E6E
+:109FC000F51D4BACF88E2A715941CF7A9ECBF39791
+:109FD00020A5E59FF1B48B7F7F40E770C138AB527D
+:109FE000B91FB23F7FA84965FB5F738F648072CE53
+:109FF0001FEA526DAAF73CEA08BBBF76A9383B6D51
+:10A000009CB836EE6435693BE8C8EC1F6F520BF71D
+:10A01000DCB2FAC77F8B786A6D1C78DFB96A10E30F
+:10A02000A77381D750BA6E491D904FDE7B0938DC8B
+:10A030001B0E0EFDD643589C7BBF38241EEFAE5D31
+:10A040001771C5B3778D79FCBB767D822EFAAFAFE1
+:10A0500095C15FCFE04FF5BBC7607E158BAD04ECBB
+:10A0600056A1FCE77717E13F5A7EF66DF1C99B17C1
+:10A07000D7E1BB6561F8D8F3E1F898B8CFAF4D856B
+:10A080009E0AF7F3201E12DE3982737E65A26B1FD3
+:10A09000F4D35316F89B0ECEA171ECDDF083D1AE54
+:10A0A000FDF05D32B2B80611977C5AE7F915E86DFC
+:10A0B000EF3DFA19F2B36E1016748FBC41F3A097FE
+:10A0C000FDC3E67C13E04746F88DA1EF8F0F147FA8
+:10A0D000FB1B2EFFFAA76CDF8938D49E6D5F66A04C
+:10A0E000FDEE12FB62207854C8E3FD703FA4B72454
+:10A0F00012E56797447CF0DE71576902EA2D5DE94D
+:10A10000463DA4DFF6B9B82B3D1BFBD79E8FBB9213
+:10A110004BCC6CDCC953217D2FF95421C8BDDFF035
+:10A12000F8CB76A3A7E03DB00F8F8D40FFFE8D9258
+:10A13000BF10E0A03D5777BDB5A04CC9ED7FBEA6CE
+:10A14000EB9B04EBAB3DAEBB1BBE5DE979BB76FD83
+:10A15000DF08C4B98F5BFF1581F7EFAEFCFCDD199A
+:10A1600093AB805EE16A021219D345F5099ABF5498
+:10A17000FCD639899ED33343CEE5256FB3382E9E66
+:10A180006ACFE7FDDE095CED51C70D96FA8A305EB5
+:10A1900045F647E1BD601D7B6F43C473BDC9CFF376
+:10A1A000F4BC3E240DED709D19AAF3FA1D1F2DFA83
+:10A1B0001EF281088CEF78A6FD443CCCF58F9DF112
+:10A1C0003F794509D277BDED6F24F49DC0DAF5BD26
+:10A1D000AA7CD786E0FB56701FABF65F32CA252AF1
+:10A1E000C75A104FE435E3DA10F94ADAFEDC07EF1C
+:10A1F000D194DF5502C050BE36CF74D07695FC3C6A
+:10A200004448E48D0EDAAE929F1F8967252B8FE7B5
+:10A21000F53D9FB07CBA28FFE34CAC7F95E86F1CFE
+:10A220002B4F1679DEDFD5229F782396678AF62595
+:10A230002C9F23C6AF64EDADACFEE4ADFF9C097A64
+:10A240008DE0F733D2B89CE0EF5251FEEF4C2BBAC1
+:10A2500068BC8EBA9CCB07F10E55C51DD322DF8595
+:10A260007DDC2661EC61ED9D06B4E79F8D69CB0D29
+:10A27000BD2F2FE27A9CE5568CF3AA7B71F8769974
+:10A28000C73B811EB39CFBE92B640BFA617AEF6537
+:10A290007C7E203D70E5FA9755F8EC57CEDFD3462B
+:10A2A00047251DEFDC0F13F17E0219D689F102EE6E
+:10A2B0003449C427E0BD6A11571797451C707E8E3C
+:10A2C0007B2982BDA77AB213F9EFCA97987DBB6E3E
+:10A2D000CBEB28EF96CA0ADA97BE1EEA5A07F0E9D6
+:10A2E000B6B2772F57AEDF87FBF431C5C6FD60816C
+:10A2F00051A1F0BCB33FFC3D69F11785BFBAFC3FEB
+:10A300000C7FAD5D5DDCD75F7D85F17FDD56E607B7
+:10A31000B6733CFD49A71473783D02F03AB7A233F7
+:10A320003B5A8620EE4E8C77AB90DF2982F3566F36
+:10A33000839500DEBBA5CEDC0FC3E05F7BAE389F0C
+:10A34000415471693BFBC3F7E94BD0F7D3FF4DFA9A
+:10A350004ED4FB8D76F01B1F65EFE51577FEC9180F
+:10A360001A1FF44E1A3B070F6E677E311117172C18
+:10A37000B7323C71FF535DD53BE3C1FF24F6C3C444
+:10A3800048D206FE044AD7764ED776A06B41BF412D
+:10A390003F146D1706BE41FA252C2E91C3E9B7FD77
+:10A3A000E1FAE125E0FAE17F13AEBBA93E8CFEDBCA
+:10A3B0001722D04EA385F33F385C05BC23D32F0E64
+:10A3C000E7C8F4FF0C9C23D315959D43C07B20F96F
+:10A3D000A4C58F9877987D5AF44DF6E923199C4FC0
+:10A3E000E9FD188FABC57B4C7A3FBC27A45F1CEFFF
+:10A3F000EAF2FF30DEB570D3A6B5DC9FABFD5E9808
+:10A400003E20BFFB56E0F87FCD4FB0B061BFAA7CC5
+:10A41000F1FAB754E54B3CEF5F965F41D8FBFF5B29
+:10A42000FE05E15798F9FC2A1DF81FB5F24137C423
+:10A43000F923A0C71B5FFE7AD48730F9EA6C8CB78A
+:10A44000BA8DAFE58BF17FFFE47B94BEBE6860F60A
+:10A45000D663FB3F372839FDE965E1791D7184D06A
+:10A46000D9C2F5EF1B40CF5A48D8FB54DAFA0FA6F1
+:10A47000337B30C64951BE30D74C0C71941FCC9DF4
+:10A48000CBEE4BCF0507630CA63E172D9FA9273EA9
+:10A49000788FBBD2A2F799D0EFA9BEFF6EE2EF751D
+:10A4A00093B858D53D78D921639CDF9C12E62FBD27
+:10A4B000C5D286F787E71DBAEBDCF7602F6FF4147F
+:10A4C000B1B87771FFF0F7BA2BF1833E087A2A9C76
+:10A4D000FB24EE5F5F6340FFBAB6DD2ABE9F66CA0B
+:10A4E000128BA3D9C3E233C5FEA4EB3B64CA67F762
+:10A4F00060E0F7482A1B0CBEE1B9A067EF473DBBFF
+:10A50000BE64432EE0AF7E9274DC941B3CEFD4AF6C
+:10A51000FF0BB6D7F2676D7AB9F6D54F1A0F21BD8A
+:10A520008873D1B1461FE6B5F6D60513FF17FD9324
+:10A5300063FFE26D8274DC578E0FC7D075FB1B3B47
+:10A54000FF2D7B82B02308BB82D64E21F88878BFCE
+:10A55000D2976EE3EFB296A2DF83E8592AF8EDC1F5
+:10A56000FEFCF9D7E917D727D5E5FF61FE7CB9F4E2
+:10A570005F9BC4E4AA96EE8F56FD0CEDCF82BEB56C
+:10A58000F4BF006252E8F80BEA25BC273E7755ABD2
+:10A59000619CF4CDE97DB5E56406839B462E5CB1F4
+:10A5A0003C50783C878CE70B93BCC60E760F8187B6
+:10A5B000AFD3D5EF0353BC48191797ABEAF2FFFAB4
+:10A5C00039E0E4A26F2617894A9F48CBE8B76EE5C9
+:10A5D00012EB56FE9BEB0EB9A7B448D605EFE3404D
+:10A5E000FC35C481F678D9FDD4EACC56FCDD0352A3
+:10A5F0001288027E77EB5E99FD9E8EDEA14F0E796A
+:10A600003FAD8BF83E007A5C359EBD3BA48D9B76BA
+:10A61000F378EAD596DD78BF51FB0E9A88CB76F3B6
+:10A62000FEB4EFA189F6E29D03ED7B685332781CFE
+:10A63000763EC967712917E7A3DD20CF43FC35DDDE
+:10A640005F35A25DE1C6C74AEEF3A405F13227A348
+:10A650001FDF99977171BEA32EFF2FD3AF6CDD81E1
+:10A66000F7D8AE947E47643ADC407F822FF7F19BA7
+:10A67000574CC86FC43BF33D6B9EC1F7877ABE242D
+:10A68000E897BDD43BE313BBD835C40927BD4D566D
+:10A690008AD771C73C68AF1B7BC485F776C7BCE31C
+:10A6A00080887F9277C029C3BC853E23F49B20FF1E
+:10A6B000E2F7D9789CD5E5F2B92BF537FEA7FC8CEB
+:10A6C000E25E5DB7C15704BFE7E0D91381BF03A1C4
+:10A6D0009DFF9319BA8BBE93DC11E57A12F0348B8F
+:10A6E000CB09F15E7285CCDE49EFED94D15EB8EE18
+:10A6F0007F7EFBAB47954BDB15EA6DBD61CF6522D5
+:10A70000ADD7B17B2DF9E50AC649C2790DEC87C2F8
+:10A710009EA8AD7F4A297B2903ED5BE3F13DDADE9C
+:10A7200087D97C06C257FDFA008E3F60391FBF7E75
+:10A730006F912DF49D95F3197DE743DB297310DFAD
+:10A74000974B17FFD7CE2D3365E291A87CCD91BCF6
+:10A750004CEF254CFF5D403A315D440298BA08BB8E
+:10A76000CFB094D8315D4E9C98AE555C5D191837CA
+:10A770001448C0F8D317FF390AE8E6DC75E35A211C
+:10A7800046F1DBF22369F5BE9E3C85BD97F4C23FDE
+:10A790007F07F4D9F33F86CBE21B47A21C6448181D
+:10A7A0003FD37BA532BBD754F25DDC17E2FD5D32AF
+:10A7B00089F9E1962766E2FE09F2CDC46D826F82C7
+:10A7C0003F39E7B88EC5C3DC2AE17BC6ED7E1D6E3E
+:10A7D000B19C15995EF8DDB9F6DDAC3CA72EDA2BFD
+:10A7E000D17CCED80856BE26DA0BF74F16123FEEB4
+:10A7F000CBC570FB4486FB4B8C2F8ADF0BA02782D6
+:10A80000A1126DBFA2C3CCEE5110FF30E0FFB970B2
+:10A810007E0A174F3384F1F1D14319BF1F5DA6B6ED
+:10A82000870CE5E5F72965DF0778B40C71640D81C5
+:10A83000FA319D9B1E2C043B908E809FE6B3B1B7EE
+:10A84000A35F53B47B51291B01F59F9558BCBF678B
+:10A850002FBF6F4C0209A1FEB1B54A792ED42B1A35
+:10A86000C2F8D3407085DF517486392F8AF8D1D170
+:10A87000706643BB3CC177D29E95587EF2E35B6F16
+:10A88000DC68415F8207F4E31715D744186FB49171
+:10A89000100BCCFFA7FC7E1B69C800BBE8AAC74C05
+:10A8A0003AD02F3EA2E218EEF7FC819EB721FD9828
+:10A8B0009E9B21FD233D37437A9C9E9B213D41CFAA
+:10A8C000CD90AE386F87C7CCC989218EB9D0BFF083
+:10A8D000F769E75B3984F1D7BEF1F71A71FCFB1415
+:10A8E00017C2B70FDF7B08FEDEEDB3D18194988BE2
+:10A8F000D05BCFDEBFA39F7420B808FFA3B67C0A4D
+:10A90000C76BEE6E3DCAFFDC767FD4CA907A2B8788
+:10A9100018B17DCE0B27A3A0FF6E5B1F7C1D125DBF
+:10A92000F24C1DCBAF7CFCB91B378E82F93BBE0FBE
+:10A930007441F7F96A4873DB7FFB00FC5E2AED1F68
+:10A94000E3247AA4C0663C2F68D6A1858358D7B388
+:10A95000D19D9BA0FDB32F0C859550BE43D8BE0161
+:10A960003A92C2AD7703AEE74653A010EE0BDD7806
+:10A97000410E1BA77D9F528A704E067A43FEDDCAA8
+:10A9800053465F026FDF747F6BFB23E2FD15E0A58A
+:10A990000AC8A5AFA2402FACE4F104EDBB87FD06C9
+:10A9A000D6E9392413F8BDDAD131EAFDB78BE34992
+:10A9B000A4397B8D4EC0D7B37B4F0D83F789297E99
+:10A9C00086C17BC5DB865C45427FEF3167EC978FA4
+:10A9D0003C1887F5F1F769E7916D15103733DFBC47
+:10A9E000FF0D58D242DBF10A889B599C241D8474C8
+:10A9F00089923919E265C47D8365234A0FC2969A0C
+:10AA000061AF447DAE14984C887C283747F247D814
+:10AA1000853C8A55E5A724A5AAEA4F53B254E5D34D
+:10AA2000478C54958B7167D80B54F546C70486C282
+:10AA3000798EAE83BD03FFA48CF186392F1CB97EBD
+:10AA400024CDCF7C6A0EBE43F92C2F9FF95CB91739
+:10AA5000F0D143E169A40AD5E9921F6C7E103AD384
+:10AA60009C176AF73E71D0A15CC679E112E7848138
+:10AA7000DE4F16EDB5E704CA371F00BE39FAC5D957
+:10AA800036F0DB3E3BF6CB148847FDCD10FEAE0C16
+:10AA90003F3F0C44377DFB435218DDBC259327C351
+:10AAA000D00D44F2323A64E9CCC3EC7EDE95F2B5C7
+:10AAB0004F81AFA1BDC043427F7F576BDF1B6DB499
+:10AAC000FFE636B047BD2BC30DA5BE7B932BE16FD0
+:10AAD0003948EF64F9B6BB93E3F0BB07F46137B7CD
+:10AAE000F70D52B83E55BBFFEEE4C2603959775CB2
+:10AAF000559FDC2935ABF21B33D5F97B4B9B43DBF0
+:10AB00000FA48FAD7C7889D19503F76EA5B0BF37C0
+:10AB10002CE6F3FF010980D5200080000000000032
+:10AB20001F8B08000000000000FFB5190B5454658E
+:10AB3000FABBF7CE0B1960782810427798440A8444
+:10AB4000895728B08DA01ED7DA1A4C8F545693E53A
+:10AB500003794DE0B6F4D8E318AD8FB6076D5B69A5
+:10AB60006B355696E7E439B144462536AE5B49EB82
+:10AB7000D654A266E499D8424C70267A6D9D5AF755
+:10AB8000FBFEFF5E672E605B9DD64EE79FEFFFFFEB
+:10AB9000FB7FEF279014CA70CE0008F6ACCC7099FA
+:10ABA0000106F7D61AE41880D3F4EFE2F0DAB8F928
+:10ABB0007A8303CF5700383ACCE3CF01D601140390
+:10ABC0005C29817BA2F3145960E760FF65F1BD2F1A
+:10ABD000010849009E178DDEED5684E35C06676E22
+:10ABE000F89E8DF04E0618D972FFEFBF2AC2F525E8
+:10ABF000B0E30E8CC4430DBD9BD7755C1471CD9F23
+:10AC000004D7D17779968098806B7055B407E200AD
+:10AC10009A6A633C623E9E67860E992E04C8F1A62E
+:10AC2000B59B52018E8A22C039440778A014EFE305
+:10AC30001B045F24A739EFA4DFB9C867CC2FC7E78F
+:10AC40004532B035BF3294E9C67BD77E87E71CBF5B
+:10AC500003A291CE3F804A8F034C5C2E04BBBD19EA
+:10AC6000FE3F233F4DBD1218909F61F01DBA5A6000
+:10AC7000D7CCA925002BE9A74CFB1D0690D86F194E
+:10AC8000707F95B2BFB27CE5A5108BF056FD4020D9
+:10AC90009BBD0FA7F1FFD57F6F3798F17CF553DA95
+:10ACA0007D420F53902FE5FB3AF0B377EB77E23D0F
+:10ACB00053F85E23DCFD9984EF367669BF5F24C7C5
+:10ACC000240DE6E08F0228382DB16D91DE6B36F150
+:10ACD000F7E64ADFBD7B09EAB1E925C96EC4ADD10B
+:10ACE000DDD3E200F98339A8E4D4F1F26BDA8C7A8F
+:10ACF0002A0CC3A7764BF3BD745F17CAA89E315EBA
+:10AD0000CE60C9E2F82C1C5F73C5D70B01F135F793
+:10AD1000E8D0D07E00CF4611E4083CCFED31AEF252
+:10AD20009AC3F4072D9CC7FC9E2F1366E7F2751D8E
+:10AD3000D101ED1C2F70BF9821803E09F141B56013
+:10AD4000DF8E4B5F4F7225C9BF4F009F5CC09E587E
+:10AD50006442FD5CC19FA37D3324E08F946C1DE1B0
+:10AD600059A8C8FD8AD27F7C23E0778B7B164F439E
+:10AD70000AE050D7B23ED40C6C906D0CDF12F0E8B4
+:10AD8000492F7DF1CEF416A4F3324960F6DF171F88
+:10AD90001A16107F5F45B4D026B0F7EFA4F755BE62
+:10ADA000FAF4CE7437E36B8E6510F526382E904E8C
+:10ADB000478F974758AE3A1854F52B7177217F9CEF
+:10ADC0002BDD3EFB12F4DBD1A5603122BD974B6831
+:10ADD0003808C3ABDC8FAB49D63351AE823F81E834
+:10ADE0006C96176E91F1BBE4D67B41971821371D05
+:10ADF000F733552FAA1CC7D3A1E22DF73B90BFD143
+:10AE00001D02B39F46BBCCECB3B1FCE4834B107F77
+:10AE1000A35FB20B48CFB2EEBD47487E1D6B3B40EF
+:10AE2000771E40E7DA6EB62E33997D521EE38BD93A
+:10AE3000AD8846417CAD5660C6A7357C1EE67B0CCE
+:10AE4000BC513F7C06CE043818EB7C9EF85BF3FBCC
+:10AE5000CFFB9610B51BCAE3991F90AD9D1BA63F73
+:10AE6000DF006046FA43DBA3BD4F303C68AF25618D
+:10AE70007B3DB127EB700B9E9F7853CFCC755FC5A0
+:10AE8000C3A76E4178CDF66826E71309E049A5F31C
+:10AE900027A67B3D7861A518EA6F21B977C6D8B798
+:10AEA000E3F9F147A73FBB13E1DA67A7D9894CF271
+:10AEB0001F19E57D3C1D01DA7F3E957D07291CEFBA
+:10AEC0000AC52FA56766DC574EE7CF24DA098FAA9B
+:10AED000BFA147A31C80F2FA127C791634BD93827D
+:10AEE0006750C487EBC49DC704B4CBDB0CAE83C4EE
+:10AEF000F7EA47FE7AA80CF9A97AE6370FCF44FAA9
+:10AF00006ADF9B0CF44E58AFE3E2406C2097FCDF05
+:10AF1000C6FD5F914FDD8E28CBC71171A6A1235EC0
+:10AF2000033775A75A3E8E883775C0650CF5828E3B
+:10AF3000F8A957FCAA5E741D25BA1A20C0E3228422
+:10AF40000C64570592E0A07810BAC7C8E43FD6CE8B
+:10AF5000466591D1512F828BE27941229852C86F78
+:10AF60005D5C7EC17BA63F7117CA66923541F5FBD9
+:10AF7000AC853322EDB3BFF115B2CFCD46669FC38A
+:10AF8000513C2F8DC5F31F399E7DBFC2F405F38759
+:10AF900033F9A4F5DF5A38171C14EF0ADAE4C29B20
+:10AFA000706D51F4722CC5295849EE1DF7EF3AC067
+:10AFB000E4B9F5E6A38477BF99E90F0E70B90705E8
+:10AFC0009E27D5F7569842A02B247AB7317AD5FD23
+:10AFD000C12D87F35CF8FEE00B397980F6BC4CF2AA
+:10AFE0000FFE05E5732AC67FEC365C3BF7BF3B8559
+:10AFF000F2E0587AEB5B47D97B2A3C2CF038544F6F
+:10B000007CE0FEF799CE64A213C3088B0F0377CDC3
+:10B0100060F29B2BE5C691FE8327B4F48DA5537D8A
+:10B020005FA54F7D5FBD37CD2A32398E18FC7994EC
+:10B03000F75FCC90357C8DC4FAF3E2CDB46FE17547
+:10B040004402C211F656433F51BF35268CDB485FA0
+:10B050004D8D606F03B6EFA1B889ABCF85E7F529B9
+:10B060002F2B7203A709ED78B162679094C8EC6E3C
+:10B070001170BB5EACC4EDABA0430FE82F47C475A5
+:10B08000BF35A0FD0D773CA07745C65DCF51F1746B
+:10B09000CE4F8FBB9E4AC8A6F83D6231B3BA669EBA
+:10B0A00055D0B17BE9904EF7F0DCEE433BF0741ADB
+:10B0B000ED6D48CFE3A2738115E5536FF0E5911F65
+:10B0C000A8DF3D2EBAD8FEB0706005E91B74BE3C07
+:10B0D00056EFC41B40C03A2338D9EE77505DF625B1
+:10B0E000B0B812D4434D27E22DAA12DD9DE6703C84
+:10B0F00054E367510EEEA35C2B685FF557B49BA237
+:10B100007CEDFD303F5AF8B895FB5D51A2E8EE9812
+:10B11000C05F6E57F4DC061D12F7679E47CB14B96B
+:10B1200063DD2245D62D8D4A9C0FC69A3C12F25300
+:10B13000B61BF5827099CEB797568C02D08AFA9DCD
+:10B14000053EFE5EB7369E530E59CAF2720ECBCB49
+:10B15000B31475AF17DC407A3551FEC2F52EC12FFE
+:10B16000D1FA2B08B1D501161DADA806B6CE012720
+:10B170005BE7819BADF3A19DAD0BA083AD97829F53
+:10B18000AD7081AF0D583EB8DD3288F9187EBD52E2
+:10B19000A4BC5CB464E27AFC71455E67970746F92B
+:10B1A000929F2F8F79E04A61749D4D2E53B399DDA4
+:10B1B000AB7231927DE27751E04DA1B50202EC9D78
+:10B1C0008BC990F19DD920EB08AE020783E7FE48BA
+:10B1D0007994065C3A57EE0472A99AD84E7628768E
+:10B1E000524C365D1CD6D787561E1754BD01D24926
+:10B1F000F960BC3E2183E82C8AAEFC5CC690F1DA93
+:10B20000B6F79D3A8CA34585952D36840F593FE5B9
+:10B210007059E5F399081FD976D2A99B49765E59F2
+:10B22000A8B76315BA6ED83907CF4D18FCA3504E96
+:10B23000924D82525C5D51B179807E6794ACEB7423
+:10B24000E857C6DB80C5195714809FD5B36865E4FD
+:10B250002735BC7E5D63E17ADB6B70BD4A7EDA60C8
+:10B26000F2C5CAC8D39A757393295F6E30F0F73F61
+:10B270009A2CE7BC827232223E5341984F3CF744ED
+:10B28000211C10E496566B18FF8FC0F7CF1FC277B2
+:10B290006B8AEB5D16CF4D5940FA4F53F2796767D1
+:10B2A000598A5D24FC16863F1093D5D28A470752EF
+:10B2B0009C1FD27BC1186E771F5AB95ECEB69A32E8
+:10B2C0001D1F5827D80FAEFB7A978FE2D02748086A
+:10B2D000BEF399D53540743489818C42D4D71DD1C1
+:10B2E000C70C6427AA1D0BA8BCA5C87F9B03BC067E
+:10B2F000E61FE59633F5982DEC07C1E5F81ECAA5C3
+:10B30000C8E9ACD2E371498D7B1FADA5AEF62A3CEE
+:10B31000213C41A2A7490AAD20BB3815FF9EE1138D
+:10B32000E6A753B93D2AF1AB674FEF6D691C744234
+:10B33000841F36EDF9E6AB0F50DF4DA3663B5D0F82
+:10B34000FBDF9616EA0BB01AD4C417D52F67751B0E
+:10B350007DD45F95ED3E7F39DDAB78AFDF4671FA86
+:10B36000E2FE401B95CBC19EC369DC2FD43AFE6B35
+:10B37000E1E7E493B9120575ACCB5E90BC46E4AB53
+:10B3800099EA0B05F6207CDC84761347F779BFA990
+:10B39000F6950DBDAF19A82FC1673CC46FAD42FF34
+:10B3A000AAAD375C4AF562AD57DB2FD6F57BD713D4
+:10B3B000DD753BB4FB6ABFD9A47C5F4FF59A8DEA7B
+:10B3C0003EEDBD26EA37F3A8FED3EE67662AFDA65A
+:10B3D00092FF40A933572A77883F33EBFF0C5E2357
+:10B3E000F2D6FC688BDD4270BAD9CEE26DFD0666FE
+:10B3F000C7EA7DD89AC86C44F5DBDA8DC0EA675598
+:10B400008EF94F1B1DA48FFCA793595D8CF53CABA7
+:10B4100047309EF0FE1E6522A0DD3D171FCA1411A5
+:10B42000CF733DD976AAB75F5EEB807F9D17A64F9D
+:10B43000ADF7E74A3BAB0CD447DD887D146E35F79A
+:10B440003ED96642B87913D00D242D3B8EEAA6E290
+:10B45000FD1278E91DF03E508E6B971A4F52B0BE28
+:10B460008F9047943C09E409FA79A3A2B7E8EC0469
+:10B47000CD798CFD1CCDF771A599DAEF3D0E7F6E6D
+:10B4800009C573FE7DBCE302CDFD36C16DF791CDDC
+:10B4900004F03FBC57AE88B1C2BF82CD1D12E71782
+:10B4A00068EE6F889DB79FECBBFC0BDD183B704BC3
+:10B4B000647765018047502FB386B5E7C507DB2168
+:10B4C00016F1471DD48D99577880EA16A3ACDD5F3D
+:10B4D000AEDAC55498AA99439C913BB7FBD1219110
+:10B4E000D945099CF7707911C9590F5E79BCDC46C2
+:10B4F00069A5FB6603F38B59BD2D768A47939D5A48
+:10B50000F927D768E59FEAD2CA3B6D9556DEE96E0A
+:10B51000ADBCCF6DD5CAD7EAD1CACFB67196E6FE1B
+:10B52000B4F64A0D3C7DF302CDFDF3BD0B3570CE74
+:10B530008EAB34F767742CD39CE777AFD69CAB7691
+:10B5400036D60E2EF4358FB13311C408FDAB7A56C2
+:10B55000EDA070FFAD1A3CFF6FFD6F1FA3FFA7C8E2
+:10B56000D731DEBD153B7437B9EB65D13CAE9D9943
+:10B570002794EB59BFF6B69C5815437795FCE654D3
+:10B58000F21B94FF91C3160EDBFDF67D14CF0A8EDD
+:10B5900038AB88AEA2807B1F85F392A1F6AA38BA99
+:10B5A000EF00D932858F9CE8FEE5A502E8347E8560
+:10B5B000F094B03CAFF0AC93E2F072D977DE36167F
+:10B5C0006EC9E94BC2F320A194E7856A4714E822CB
+:10B5D000E452A1EC0325E92961F9ABF323EC07C0A0
+:10B5E00040FD8068F2B65927AA77EC9B25568FB9A3
+:10B5F000587DF686E06273A545267F06C5F7DF25F0
+:10B60000BBDECEC4B8764AB4CBAC9E13026DC45434
+:10B610009018A3A4E5A9AF76501F87ED2CCD2BFF82
+:10B6200074476DB52797916F0994F0B699FEF56749
+:10B63000BA8E64A2FC0704CBFA42FCF6AD5927335C
+:10B64000287F1925944401CD4F1C47E9FCCCDC240C
+:10B6500019F9C3781B10650F89C273ABC0FA9093B8
+:10B66000F4D8CC08FFDDA867790B94BEEC1A455ED0
+:10B670006A5FB654C13F804FACC2787E4DF71B4C19
+:10B680002E7529C3CA1CCA6DB7E0FB374C3517505D
+:10B690005F0A8E423BEFE7D53E2D4DFA297955EDF5
+:10B6A0006BCF76BF2E6548D32FC3CEC409E7916315
+:10B6B000E75E61BEF9FB039BA2591E1AD894CEE641
+:10B6C0008BE1F74FB1F7AF71BFA3B193EB5ADFD75F
+:10B6D000D8DFF59E8F34E781A4903E0DF90FEC4A38
+:10B6E0009D7735CA6FE4056309F5ABA8B7385B7180
+:10B6F000F8FDC03DD3E710BEFFCDE7A74CBEFD6B04
+:10B70000FD6CEEA6F2796CED110607D606D83A96D6
+:10B710004FB5BF5557C3DF209BEAE59030C93ED1F6
+:10B72000BCE6311BEF83FA674FA9A47CDC9F6ED087
+:10B73000F1358BC3A9A5260ECF9B4F6B506FDE480A
+:10B74000FD6DBF000E01ED61A9E07CEC7AE4BB3A2F
+:10B75000D9956BA37A7275284F87FED0941FB8567F
+:10B76000407DBE1EEFCA27FE052C065313189D59B7
+:10B77000D4370C899E3C0163C14D4F765753FD3F32
+:10B7800034C9738A3276ADADAB9AFA832103F78F51
+:10B790005B9E7C84F9C3B716D74C7AE71341F2312C
+:10B7A0007B7E49F06E67F616302C8CF8BB823AAF80
+:10B7B000A17E9BFA9B60145F67DBF8DF5F2AC7AC52
+:10B7C0004B6D3CAEDD426B31E9E5EE2CFA7BCAE80D
+:10B7D0006623905F203E8748F87AF85C760AF2404C
+:10B7E000750D566FAC5F2878D5E8A3F8A1CE751615
+:10B7F000DBACECBD241B9FD724DD67F4B6B1FCEEB7
+:10B80000CFA8463ADBF558EF50DF7010D81C6D8496
+:10B81000E661117A596CE3FD17DC08C0CF93B7D10C
+:10B820007943EFC0318A27DF67BAAE24390C8872BA
+:10B8300009C59386D8BDACDE6BB6C9EC3BA497F1C5
+:10B840008F71E14ED2CF2F380F5C45FA6D300578FD
+:10B85000DDAACC03CF26B791E5FE8772D9FCCB9E3B
+:10B8600041F4A9F422FDCDB688B99D4A7FF89D1F09
+:10B87000F60B75AEA5C2835B3664919FA15EF8BCE2
+:10B880005112AE5B38C1F70F2AFA3E96E2F410FE71
+:10B89000D56E3EF70BDB4DFBCD4749CFBD66162776
+:10B8A000CFF6FD583E1BF6F43279209FD7127F1158
+:10B8B0007CDE1BC9E748CFE18772E59FCF5F309DF3
+:10B8C000FF1D29B8ED9B0C19BF6FD8FDC611B2BB87
+:10B8D00006751EDFA59D33182761FF9A30D11C1D08
+:10B8E000B34F445D6654BF9FAAD37E8F0539CDA95F
+:10B8F000BBC9DFA97E71F0BF8BA9F9B84BE96B8496
+:10B90000C0EB2C1F103EF287F58287E545758ED17E
+:10B910002660DE23DDBA5A589E90CE35DBC99EBB29
+:10B92000D006FDE4073A47349B5F8FE9A3BF35B8E3
+:10B930007691FCD6BC53994C7D76E79B0B947E8D1B
+:10B94000E7A962C52E8B093FD19F1BC7ECB548A163
+:10B95000AFC484F55026857C8FC4E715CAFC63D339
+:10B96000EB9A3EEFBF32596853001E000000000002
+:10B9700000000000000000001F8B08000000000015
+:10B9800000FFFB51CFC0F0038AC515191844D41924
+:10B99000184C341818566820C46989B5B829D39F43
+:10B9A000C9C2C0900DC4B9409C0FC47C4C0C0CFCA7
+:10B9B0004CC4EB171445B0F50419188480FC6F02D1
+:10B9C0000C0CD7851818BE8B30300803F92E40F1C7
+:10B9D0000420CE01626FA0580B905E04C4DD402CA1
+:10B9E000228ADF7C5102F26B8551F937D1F87B84D2
+:10B9F000F0EB5710C12FAF47401E1B16D1223F3E20
+:10BA00002229D03B10585F01955F26C7C0D0270F71
+:10BA10008C7FA8B80192FC4B20BB5C0EC2F69660EE
+:10BA2000602806F20D15B09BEB03942F01CA7D85AB
+:10BA3000CA0300CCCCBA8C680300000000000000F0
+:10BA40001F8B08000000000000FFE57D0B78144507
+:10BA5000B670F574F7CC2499994C12F2E03D490088
+:10BA600011030E2144C0709924C0A2460D021A147D
+:10BA7000750292849097887EECAEFE330189A0A86F
+:10BA8000F1B9AC17DD416137B2E8060C1835E0605A
+:10BA900000B32EBAC145C0E72680BC362443F0B9B6
+:10BAA000CB5E6F9D53D533DD9D09C4C7DE7FEFFFAD
+:10BAB0008F9F5FA5BAAAEB71DEE7D4E942328F27E8
+:10BAC000640A21DFC18F969F8B8490F850596F20B4
+:10BAD0002E924188D766F46D4CA6CF88237AE6680B
+:10BAE0005A981DD1375843EFE9CBD59EA434691835
+:10BAF000210F791C5812E223844EB55A2005F51601
+:10BB0000A83B93E07D3A3E21FDE8F80F46E2F8308D
+:10BB10002D99181A671031E07B53ADF989B01E4298
+:10BB20006A47E6C3FC163B21FD7B9F9F8E88EBA7EF
+:10BB3000EF0DC1F724FA9EB5EFEF2965570EFD13FF
+:10BB4000F6DF6DF66D1408F1EFFCC77158EF9986BA
+:10BB5000390E135D6F76B7D93F05EABE6C9F89B683
+:10BB6000E76EFBC026D1FEE5DB4409DA0D3B23F08E
+:10BB7000FDCE75820FEA95A6D647AEA4F5C03691E4
+:10BB80003C0FD3F82D069240C87133613F8715EB07
+:10BB90004511AC5ABE7ED76D305F49A38944D0F7BA
+:10BBA0008F37882EA82FD928F8089DAFFCB5078CB1
+:10BBB00003E878C53EA13EC241EB1B1F333AE83E85
+:10BBC00097EFFCD8D646E17CDA63260E23EEA3A4D9
+:10BBD0003E8D9052DF96E903E8FBA59B052780BECA
+:10BBE00074DDD94E585F69833C5CA4E32DAE8B2293
+:10BBF0008E916CEEEF08CCD77C14E7DB260F83F92F
+:10BC00004ACEDF650424E56E93912ECAE93A60DFDF
+:10BC1000CABCA73D6B713E059EE52FD2F968BF8A6D
+:10BC20009705276CB1C240DCB08ECED7220A5EB039
+:10BC3000C0FEAA8D23ACEA7D146E877D94FAD61BD4
+:10BC4000A75B607DEB8D4569A1F116D7FDA7767DD9
+:10BC50006B5313DD69BDE3F3B487827444A85E4A75
+:10BC6000880BE94FF219818E95E7E78518C4F7E252
+:10BC70003A9138CCA1F1153AF07EC0E9748795F17C
+:10BC800001C7DB123BE02C84B76E3BC7A314C8543A
+:10BC90008FAF948F003EE87A6A3D762C1FF72461BF
+:10BCA000F9A4C781707BDA3312CBB51E273E7FC65D
+:10BCB0003301CB751E1796CF796660E9F3E463BF55
+:10BCC000E73D05586EF0B8F1F96F3D2558D679AAD1
+:10BCD000F0F926CF322C377BBCF8FC65CF2A2CEB51
+:10BCE0003DB5586E057CD1B2C1E3C37EDB3D7558CE
+:10BCF000367AEAF1F9EB9E462CD77038DAB248B6BC
+:10BD000044E16073113B453B89CD7365CBB41E9B09
+:10BD1000CFEA09F3BCD9465A4F70D33A85CB80326B
+:10BD20007FB689D60754B1F621F7921C33AD0FF1D7
+:10BD3000B2F69435AE9C085A4FA965ED23D67973B7
+:10BD400022697D848FB58FDAECCF89A2F551F5ACED
+:10BD50007D4C13C9B5D0FA183FABA7EF73E55A690C
+:10BD60003DBD95D5333FF1E6DA683DB38DBD3FA9C2
+:10BD7000C3273A2C3DF1B055762C2014574DDEB92F
+:10BD80002E89CA9BAD46C75DC449C87BDEF92E89A2
+:10BD9000CA8706D985ED6DDEC5AC6E74617BB77759
+:10BDA00029F6DF2EBBB15DAABE0FDBB71BDDD89E27
+:10BDB000505D83ED8DB217DB47563F8AED8D462FE0
+:10BDC000B64FAA5E8BF5D7651FB6E755AFC7FEAF76
+:10BDD0001B7DD8FEF8FD9B5C5369FD05C1BD1DE4CC
+:10BDE000DE0AC15D4252819EEA9340EED570F9F9B8
+:10BDF0001C101D6DAFE96F443EDCFA6EE60BC0BF50
+:10BE0000F8EB07F5A2DF3E988CE3BC89E3C8741C0D
+:10BE1000F1E2E3A4BF3741334EFA7B25CA382D380F
+:10BE20004E44DFC6D9FADE24ED7ADE2B55C6D90F93
+:10BE3000FCB4C2DAB77DA5FF394BBB9E3F9729E31F
+:10BE40007C84EB89E9DB7A1A3ED0C2A7E183207CAF
+:10BE50008EE238F17D5B4FC6412D7C320E06E1D378
+:10BE600081E3F4EFDB380D07B5F069381884CF971C
+:10BE7000089FC17DDB57C6212D7C320E05E1F35FA3
+:10BE8000B89EE4BE8DB3FD532D7CB67F1A848F49D6
+:10BE900080F50CEFDBBE323FD3C227F3B3207CEC3E
+:10BEA00038CEA57D1B67FB675AF86CFF2C089FFEF8
+:10BEB00038CEE8BEED2BF3AF5AF864FE35089F1478
+:10BEC00001E033B66FEB69FC5C0B9FC6CF83F0B922
+:10BED0000CC719DFB7F54C38AE85CF84E341F86461
+:10BEE000E0BE26F66D9CC6E35AF8341E0FC26732D8
+:10BEF0008E33B96FFB9A70420B9F092782F0998E9F
+:10BF0000E364BBEB985146C7B1F63ECEEB67B4F0A5
+:10BF100079FD4C103ED7E338D3E838A9171F675294
+:10BF2000A7163E933A83F029C071AEEADB38AF77AB
+:10BF30006AE1F37A67103E8538CEB57DDBD7A42E53
+:10BF40002D7C267531F88C3B50956BA3ED54173A38
+:10BF500045FACA951D2E9740EBA29DD545BB93800F
+:10BF60005D222AF606697589F47DCBE698F4078987
+:10BF7000DAEEC8B913E8C74AAD31B5DD113D21523B
+:10BF800063E7C4B86235F5B8190334FDE3F35334FD
+:10BF9000ED8905A334EDFDDDE99AFAC092499AFED8
+:10BFA00083AB7234F5A1CBAED6F44FF6DEA0A9A7D1
+:10BFB000AEBA59D37F78ED7C4DFB256B4B35ED97B1
+:10BFC000FA9668EA97D5FD42D37F74FD724DFBE582
+:10BFD0008D0F6ADAC7FA1FD7D4C7B53CA3E93FBEB5
+:10BFE000F5794DFB15873769DA27B66DD5D4AF3CA7
+:10BFF000F9BACECEB3D88F5FC6EB22D03D61767F43
+:10C000007FE6F7F8AD46AC1B0758D08EDF652D7282
+:10C010001CA3F835BEB5C0D18FE217700A7E45F675
+:10C0200080924BDAE8F37B26B92FB1D3E7F718DD1E
+:10C0300097DBC3D8A7941E049204A5C300A5BEFD38
+:10C040000199D163CEC0F323DAE9FB9586C0881845
+:10C050005ACF12B31B817E770ACC2F8A144915F46C
+:10C060008B3411F40B1E48CE7CC1ABA2D75583296B
+:10C070001F0AA17157C9EE24B033DEAA6EF7821DE4
+:10C08000523398EE6B0021CD42BBDF4BFDB4070667
+:10C090001725B9E9782623B5D3D5F31BE9FC693810
+:10C0A0007F0BD0EB7B307F7CCFF94D291334F39B92
+:10C0B000879468E6371BE9FC7642DEAF3EC5E7A70A
+:10C0C000489844C85F845338BF694809CEFF8091BF
+:10C0D000FA2BEAF92383F31F86FD7FD6DBFE532676
+:10C0E00069F73FA454BB7F23DBFF91EAB37CFE4892
+:10C0F000DCFF51E12CDBFF9052B67F131B3738BFBA
+:10C100002D08FF93307F672FF39B52B3B4FB1F5A68
+:10C11000A6DDBF89CDDF5DFD2D9FDF82F39F13BEBE
+:10C1200065FB1F5A86F31B4D6E27D08F7160649597
+:10C130008FCE4F1D6107490472A1F340393216FDBD
+:10C14000E49784145CC73D918CDEBE8AA4F486F229
+:10C15000C6CBFC581F956C99D4EFE2B4BE7873B689
+:10C1600011E412B6537F65215FEA1D8D22D2377923
+:10C17000D2E41B4ED7DBD9287AA17EC793937D20CA
+:10C18000FF2A4DE4F67C784F227E78FEF953A39F78
+:10C1900057EF4B5F2EAC958FB7A9F82DE847E59088
+:10C1A00091551698D7AEA91FA17E10A1FEC527D420
+:10C1B000CF2094248FCA6CBECFA8BF04F536EA2FD7
+:10C1C000413B21D5B85FE2757D308CAE3F9F283F63
+:10C1D00017EEF32664293A9EC4F8F7C81AC107F887
+:10C1E000B87D5914057E683D85DE384D9DEE0FFB08
+:10C1F00007AE127CCF0B38861BE033938F4760BDB0
+:10C20000B45E6067EF1CA2E8EF4F51B060D5408A82
+:10C210008BD038B3884B4EA4EFCF595A2843E8A2AD
+:10C220005510062F01FA5920539711E0E78D276921
+:10C230009C38E87A6FB6B3F167BAE4636DAAF51477
+:10C24000C866573E5D4F41A188EB9F3543DBFED169
+:10C25000CE2897610C2D573D81F3CCC9D7B6DF545A
+:10C26000A0ADCF756BEB54EFC9A0F76E29D13FA7F6
+:10C2700060A1FB9C17842B5D285DE7AD1C0EB756B3
+:10C28000C95E0D5EC16D55DA21A0E026B82F7C5F36
+:10C29000ECD9FFF665DA7AA1575B5FB04A373EA763
+:10C2A0009BE31CFF47803E687902E883C2F318A72E
+:10C2B0008F905CD5D2C78DC16D30FA50F6715C623B
+:10C2C0002838BE8ED1C7C2DAA8F0F45018A4079758
+:10C2D0009ABE147AB88DD3C3A79C1E8AD76AE96A1E
+:10C2E0002EF1AD4CA2EFDFB26617E2E9A050C8E82C
+:10C2F000E1970A3DB469E8C1CDE9418FBFDB383D24
+:10C30000DCF673460F7A7CB6717A685B7B4E262921
+:10C310003DF14AF1A0A9533CE8F06E37023D507C54
+:10C3200084A587F9C17DD38DD3FA02DED6035F9C45
+:10C330001EB03D05C04E104EF87E6ACFFE544E68CA
+:10C34000EAC56BC3E3BFB2313BEE986A5DE5F557D2
+:10C35000C51D53F55B5C3753535FE49BABE95FBC92
+:10C36000B650D3BEB07691A67DC1AA3B35F542EF5B
+:10C37000CF35FD6F5F56AD69BFB56AB5A6FD969224
+:10C38000C734F5B9EE5F6BFADF54B05ED33E27FFDA
+:10C39000454DFBAC195B34F599AED734FD0D3B2F01
+:10C3A000BD1EE831EBA048C0FE38E67120DD1FF766
+:10C3B0008CC4F2A4C7897C71DA3301CB7D8DCD4F5B
+:10C3C0005C49BB7C192888264C7F16911842F62CB4
+:10C3D0007757AFCA027D4E50EFFE717951B5771095
+:10C3E00095530607C2396FAD91F8C711228052E20A
+:10C3F000F307C4507B561B6D8FEBBD3D6FAD14B67C
+:10C400003DAB4D0A3B6EE5E38543ED61E233217EB2
+:10C410002603C13EEAE2F6B9BEBD4C20F9EAE78444
+:10C420002C47FE8F3130FD5C666472A26C6BFF1C82
+:10C430006283BA7F44D585E6ABA7CC9508F491AA70
+:10C44000E1E3E2B59769E43C81E86D3CD0D938CDB1
+:10C45000F3C575576ADEEBD825E2BA2B4086507DCE
+:10C460003D8CE4070CA097FDCD43668D8675BACE52
+:10C470001A405E35C6A3FDD8E19911774C023CE61F
+:10C480006379D25380E5718F1BCB639E122C8F781A
+:10C49000AAB06CF32CC3F2338F17CB4F3CABB0FC7C
+:10C4A000C8538BE561CF5A2C0F7A7C581EF0D461AB
+:10C4B000F9BEA71ECB564F23969D1E17960ABF297D
+:10C4C000F0D0D3DD49AEA74F03FD5D80CEE2C407B7
+:10C4D000AA570D0AD159E28A87ABBD59A171F3D68B
+:10C4E0009A389D2468E86108F864E3815E4C9C5E9C
+:10C4F000C2B7E7AD952FD89ED526871DBFF2F97F2D
+:10C500000DBDCDF991F416A2A7813A7A4ABD183D26
+:10C510004D12C787E8698EC1CEF41FA7A787601F99
+:10C5200061FC8F6230EAC6ABEC3A57148B67F37349
+:10C53000076AD1B278369F7B051DAE15ED3FDF4807
+:10C54000C073F7C8BF8F80787DF761AA28937BDF1F
+:10C550009F9E5E7A87BB0BFDA0221F55A2E37AB691
+:10C56000474432B84618C80C924EC8EAE1BF75CEAF
+:10C570004FC3BA4462E17D9F736698F32802674F08
+:10C58000891787EB0AEB576360BCE3CFFC2313CA20
+:10C59000398614E6DF348B68DF13FF0B4E806F5053
+:10C5A0001F999C4910070F0C37DAD13EF059B4F0AF
+:10C5B000F3D27A66087EAB298C5A51DFD72621FC4C
+:10C5C000867D35A27F1FE07731397F3178CEF70D38
+:10C5D000F897C0F362F2F1627291B81C2F37D2FD66
+:10C5E00077ED1C9DFEA003E4E085E1AD9C5FE9D7FB
+:10C5F000F3BC287D2F3AEE4A50E8B87508A1F388BD
+:10C60000A21DC7EF6EB884C92FC5EEDB66F2F50533
+:10C61000AF6792B5E33DC5F94F19AFBBE5051BF810
+:10C620005B4B920CF66361F0A094E5F5C9768BDA6A
+:10C63000FE6CD4D6BB6B8519F568273AA2678F06C6
+:10C640003D61B71F1B06723B094B659C254946FBA4
+:10C65000312AF74ED7A546333FCFC7E4C1E6189439
+:10C6600017A73D66ECFF53AFA7B77194F510D24002
+:10C670008E9A411ED3B6D4DEFBF74ACFD217463C82
+:10C68000F76D92BF02FBD04CFFFF0EFC0D22615DE7
+:10C6900019B7B25EF49A2E87E79B35F3D1F71CCA1F
+:10C6A00019EB772917E21B891C57E896EA8B635C24
+:10C6B0009F2CAE8BB06BEDCF184DBDB2B1BF5D639B
+:10C6C0008FC21F54FE922A4102FA29E3E4D325596E
+:10C6D0005609747D6F429010E85660FDCACD6D46D4
+:10C6E000B703CE9519DE7A5B1FC5DF4C89927C8932
+:10C6F000B916CF614BEA2F9D0A7AE64CC38A0488AB
+:10C700001B2C16BBEFC90FF3BE2C3179BFC827070E
+:10C71000B4F63DA70F42C7559E635C94588EABEAB2
+:10C720001D06168FD18F9B00E3C65F1C3E159BF73D
+:10C730004F073B410FA78AC6B34637CA45FA5F6623
+:10C74000084E0AFCDE14F313243A7E695D3BC62DC5
+:10C750004ECADE11BFBC80BCECB93F4BD2F128D52C
+:10C76000BEBCA415E6993F814F441C377D4CE5F8CB
+:10C77000A93FC904E410394F7B65624886FB3B063C
+:10C7800062C80CF93BF31B16E701BC4F81BF47E5BC
+:10C79000E61D24DF867820B599E0DF9C218619000C
+:10C7A000A733E47DDB38151E7225238733958294E9
+:10C7B0001E4CC1F1DDFDC1EF3215D4B48A63E0B97E
+:10C7C000A4F83FC2771847720B98B750C09E7B8978
+:10C7D000B91AE897FA511A3F8DFA519A3AF5A334EB
+:10C7E000F522724302E425143D29139F8070D2B4D0
+:10C7F0008F92EC88C762525503F6D1AF79FC6DBEBB
+:10C800009D4803E93ECB5F7D36B390EEE76A89C56C
+:10C81000FD9473F545B10C0EA5253EA3CBD2737FD5
+:10C82000471BC6DD48253F8CC7CECF6F36621E053D
+:10C83000B44A99DCF449E97DFF890DA22BC206FDBB
+:10C84000E87365BDC9DF7FFFFAFD12F238EEA3B4CD
+:10C850006E2601FAEB9127C0F723D7092E5F187EC9
+:10C860002AE474AFE8A73B017EE343F1ACFB74F527
+:10C87000D51CBE4AFD295DFB0F962FFD8846BEBC28
+:10C8800029BAEF93C6337902F017A400F2D70F1E2E
+:10C890003FA9C7F8AB811F7FB2F10769F99E8EFFF0
+:10C8A000D44FBAFE613DD6BF3EDCFACB5F7D69BB9B
+:10C8B00097EA97D23F3C652394DF4E49B5094E8AEB
+:10C8C000F7B28D2B6D2E903B92D7067C71CA27CE86
+:10C8D00008470F87B87CA506884580782BFC49C798
+:10C8E0003FBDE9A1EBC09EF86AA36CC7386A9DC939
+:10C8F0006FA2F45CD1B0288F8CC17A3BAB3F70162D
+:10C90000E8BFB2513EA2A6D3D2DF3D95007935945F
+:10C9100052061A92A0F4A37F52B1E1F3E9606F547A
+:10C920009200F2ABFE3D98FF9B58D48785C6E89EE7
+:10C93000ED18984980F7D9AFB2E1A1B3A20DFE6A14
+:10C94000C33890BE7F09F7375A246B3F3C27B98222
+:10C950005C01F2548107F1317F63C58BBF1AD34E5E
+:10C96000D7D3B1E14F36410527C54FEAAE5FF09B03
+:10C97000D71DBDCBEF4ECA876ABB56D14F8E46EE50
+:10C980002735B1B24CF6DBAEA4F2A46CBDECF4D208
+:10C99000C7652FBDF0DB67207EFDA1C9399C8EBF26
+:10C9A000F8A53D0727D1FAE22D72BF3CB60D8B905A
+:10C9B00010C24B25FD7F597A080FA5AFEC313A46DE
+:10C9C000B3E7F7C686F0B178CB2E2319DD131EB975
+:10C9D000F5BB8C6D963078A96F9F0E76DF8A17BFF6
+:10C9E0003682BC3BB5532089C961E0B97E0FDA8538
+:10C9F0000027C423C753106FBAFE95142FA05F14ED
+:10CA00003CE9DB37717902E339D2909E5F7E9DCE9F
+:10CA10005FF291C909FB2F79F92E1BECE38454C511
+:10CA2000E8FAD9950920DF4A646F821D4BF6BCE411
+:10CA3000B9BB91DE8AF7DF9DC0E292AEFE06D495C7
+:10CA4000DEFEB0BF85EBE6E0FE8A881BE9AEE45966
+:10CA500031DF47CB2F2532634B18BEB8566672F2D2
+:10CA6000C4F35423D0FD9D50F4C0FB22D70377625A
+:10CA7000DCF36EBE176A3162FD4B33C3D330D9C0CD
+:10CA8000E52CD32B417ADDF000EA8BD3835D8970EE
+:10CA9000BE5619D20FA837C4FDD312197E989EC175
+:10CAA000F7A89EC985E7D0BF5576458CD1BC877A5B
+:10CAB00045997F299F9FAE3B12ECB51309E1FD8F8D
+:10CAC0009FCB0ADF53BB42455F2AFE66FCBE613541
+:10CAD000E36F85DF7D336740FB170718FFC07BA03E
+:10CAE00067E9BAFC89D8BE6BB680F2C044FCE1F8B5
+:10CAF0007A83CCF95ADBAED0095DB72444ABE805A4
+:10CB0000C68F45F8A35E2F7A92BEA7929795309F65
+:10CB1000ADE7780ADF1673FE9F216BF99FAC8BEFB0
+:10CB2000533E6599ECFBED33C0AF943FBD0EE0572B
+:10CB3000391FF6FDB7CDCD076FA67CFAB77A854FC2
+:10CB4000B5F253CFA7255BEF26409F7A3EFDDBA0D1
+:10CB50002A12964FE9F3B07C3AA8ED7F547E2AF072
+:10CB6000AB02F84585E0A7C8C3DEE0A8978756D991
+:10CB700011561ED2DF0192D993FE14BA53E8ADF4D8
+:10CB8000F7E54341EE04E952A1BB205D2A74A7DF1B
+:10CB9000AF167EFAF64932C175E5BF26A3FF5CD613
+:10CBA000C4F242E97B7B0766209C5CA8C648EDDEA8
+:10CBB00081FDD4759FAE5EAFEBEFD2D5F375FDDD91
+:10CBC000BA7A95A67F5963B39120FEFD9A7EE2B2B0
+:10CBD00067C8D1B870F4EA637E59C359A317E8C295
+:10CBE00012C0F7E5E5C40B7986811D22C605BA2877
+:10CBF0008C6B207EB139D9E7A5726365048B3F74D5
+:10CC0000D903B6585AAE8C61F540BCB106E49EF229
+:10CC10003C10C1E28A5DF9015B8CCA9F6A6F1251B8
+:10CC20006EB7F9C88C707E16D528C8476DA4B77644
+:10CC300076EE354DB40C590671A55AD10936F81D5A
+:10CC4000D537D9E0DCA9AB29F5FA02FA7CE11F451A
+:10CC50004C7BE98AB48D817511AF4BEAAFF26F4E10
+:10CC600012EFD359747F0B9A989F73C71A9D3D4258
+:10CC7000D6203D1559961A419E527FE288F6BC8611
+:10CC8000F145291FAF649DB65D799FD201FAF3A5E6
+:10CC90001BB4ED6EEE0F7FA0F0C9583296FBA32CAB
+:10CCA0000EC3E5F23431EDFA028A8FAE1691986820
+:10CCB000BDBB49447C746F167C104F23DE78E4B70B
+:10CCC0000A124079A8C0A903F8C9D8BBBCEAD8F6B3
+:10CCD00069E62F816EB67F3CE63F69D9B1FDC3118D
+:10CCE0006F40FDD543433E263DFBE7EE8CC073FF0E
+:10CCF000AE9D56A4F7AE1DEF0EF925D45F33396112
+:10CD00009D5D3BBF1E03F4D3B5DC5402F2AE6B3025
+:10CD10008BC7AED8F1F59836D4AFF733FD6164FE1A
+:10CD20006177D33F3E13FA4149770576C3CE28E4B5
+:10CD3000A7CAD72330DFBB6BC7D7996ECB4FB79F3E
+:10CD40000A9EE7D16525055B617D312C8FA1F28DAF
+:10CD5000892F54D3F9CB1B761917D0F6DC37FF395E
+:10CD600006E468D756660F75CA6DCF411E4394F12D
+:10CD7000DC7299E2AB13988A3ACDBF3366E402DFE6
+:10CD8000F484CB3F313ED65778A4FCAF8187E06274
+:10CD9000F2CEEA330BB0EF6F3FFB18E39A26A44BB9
+:10CDA00065BF7FABAF467BE562FBCEFE7F6EDF8269
+:10CDB000BF2FFB76FF9BEFFB38D7BB7A3EE849E7F6
+:10CDC0003BEEC1FA4B5627AEB78FF4EE85FDC7FF99
+:10CDD000FBEEFF7BE37D2BC5BBEDE2FBFECDFF5AF7
+:10CDE000BCFFF1368E773B7ED7F3E63F717DDF5790
+:10CDF000CEBDF96F8EF7DEF6AFD8F5AD862A7B068D
+:10CE00005D5F01A9B582613137BEDB92E1806CD7ED
+:10CE100073FD308F0ECE4BC3F84D0123F30B4D90B5
+:10CE200047077EFB1C41890BA21F751DB71FAE1B58
+:10CE3000548276C875AE8799DD2055B566D3FEADB0
+:10CE4000390B9C987349D20FBBA13E7B32AF6BFD6F
+:10CE5000C9F704E212A81D7F5DCE352D60D75EEFC5
+:10CE600012D1EEA525DABB1F0C99CE9E4FD0FA3D0C
+:10CE700073DDDAFA4D05DAFA1C3EDE8D84ADFFC6AD
+:10CE80007CC107715553F613F11067352D948990C5
+:10CE90000CF942552BC1BF9893AF7D7F1FF8C1E3BA
+:10CEA0007F3C1C534D0A1C97205C48B6E8DC48FACE
+:10CEB0000047BEEED6D9637D90CF4C242783E38D07
+:10CEC000E54E8C83737F5BE6EFCB9655ADC0CFB25A
+:10CED000CECF56FCE5DEE04DB8FF8DE3A484E02F15
+:10CEE000BB44F4BF659DFFADE0E5FBE243C1E38FCA
+:10CEF000C5CB973ABC0CB2B808F0ABCCFD85A916EF
+:10CF000027AB0FCA2778DEC8FD05A99F8B78D342CF
+:10CF100079DF8BCCE66C385F338F1430DE71FD1A0D
+:10CF200011F583394DC075E54F90318FF873437E0D
+:10CF300026E03B6FDC1515BF60CB70023C1771B863
+:10CF400017912AB45FC9F9EFBECBCA84730682F683
+:10CF5000EF221721D752BFAD284BF0475278154B1F
+:10CF6000C41B9D0E716F811CD1C4BDB575F8FD4702
+:10CF700042689C8BF5EF4DBEFCD4E55FA93C3B328B
+:10CF80008CFA411E9EBB4958DC56F1AF6F6F627040
+:10CF9000AC2C137C2948777E395F75EEF81CE7834B
+:10CFA000BFDE3B0EE564F6A3A3A3D1EF7739D06FC4
+:10CFB000A8E47E43B7D7110D71AEEEA6547E3E9B1A
+:10CFC0006B53CB55A5DCCFFDEEBF407E212DBBA61C
+:10CFD0000AB522F8712480F15CEFD408B2314CFE1E
+:10CFE000EBFF311938FD54611C007E6226E091FD93
+:10CFF0008AE9ABD1B12ABCADB9F69434A6271EE0BC
+:10D000007744750EF963E10B7E3EC0757F44DBF417
+:10D01000FC30FBAD35B13856DE5BDFE2779C373450
+:10D0200025CB00971BA68A9A73FB5526EE978D2376
+:10D03000E3605D796F5D659B087869119DF0DD6641
+:10D0400065D359A33BCC79B01E9E303EC4D58FCA60
+:10D05000CE2280E7D1872308F8D1EFF273C634F8E7
+:10D060006E220D433A2E882BFE9AC3B5D364C77245
+:10D07000565EB61C4FE74D6BB08F85A3D401BC7FC5
+:10D08000271821E3218987BDA7F41B50C6FAB51BD9
+:10D09000ED15E1F63F3C82EDBF9838EF9920FCFB9F
+:10D0A000E12DFB51AB3F07EC83A93CAED283AE0927
+:10D0B000F247F70CC107FA1BFC61ACE7B1EF84DF64
+:10D0C00055BEB3BE81E95985EEF570DECBE1ACCC3F
+:10D0D0007FDCC4E2AF7FE2FCA5C05981AF7EBD4AD0
+:10D0E0007F2AAFA6A8E351D7378E7D19EC9B8A26FD
+:10D0F000C16EA04355486D46E0C3CAC6C764386FC9
+:10D1000099EB60E312297F8C3A9FA0D3C4F23B9A3B
+:10D11000D3AFBC0DE8E4DC1A13E842E2BAE3AC0D8D
+:10D12000E4F0BB06E79FE17B6AEF7B22D9780179C7
+:10D13000F5B1A7CE3555528F9B8CEB9C55962D4360
+:10D14000F8EC96B25D72A28A9E3A4DB1D8AE3C1F01
+:10D1500050E64887E7743E5C87F7111381EF42D2AF
+:10D16000EA5BF1FBD45BAA62181D96D4EF32623DF4
+:10D1700019FB2BF329F3E8F969769E36EF78416EB7
+:10D18000DB20804B9EC9BFD419864E1F332BE78E00
+:10D19000DF534FB828DD8EF9FF484F2C55F4441B60
+:10D1A000E6B92BEFCF35333E57E989C4707A62492F
+:10D1B000B52311F0B064476A2230C9923F4E4B0844
+:10D1C000A7273EF0B073E343FCBBEEAED9544F5CEF
+:10D1D000AED213B323904EF4EFE59A95738D8BE89E
+:10D1E00009056FFFC3F2E603D01361F8FB46B3569F
+:10D1F0004FDCD854887AE2C6D9A2E6FBAA6BCD17D9
+:10D20000D313D90973B12E3BA3C2D0CF07DCBF39EA
+:10D21000C4F3FB611ED0176BCC76849B5E6FF42643
+:10D22000D7C7F655AEFF5F82B322D797CC61F743DD
+:10D23000F4A44382F4BC642E95EB02D02393EB4B11
+:10D240006EE5714E9D9CCD07399BA196B3ECFD0A0E
+:10D2500037D30B958DC9BF9A47DB6FAE959D66DAC4
+:10D26000FFE690DCCD54CBDD356609E1DC43EE967C
+:10D2700030B97BAE691CDA4FBDEDEF532E6FA93C80
+:10D280001BE60C431F05F3A234DFDF1D1DFB76DA1E
+:10D290002BC02FEF8A787EFB39B703F68D7D3B03D9
+:10D2A000ECE9537C3DDBB8FCEBF4F85C53A91CC8FB
+:10D2B000BD83D9D3E59B45845F4503E3FF8A619134
+:10D2C0003E07AD4F4FFF16CF6117EF60E7B0740711
+:10D2D00079D92AFC2F7EB7AD06CE0516AF17F01C04
+:10D2E00019BE5F0078167378163917E3394AF1DAF8
+:10D2F000F0E73FE5BCDFA2A6F5180F5FE4D3F62BFD
+:10D300001F76F529F047F24C0C0F79AF08BEF5C92E
+:10D3100090CFA0EBE75C8DE747E5F5DAE707F97E0C
+:10D32000178AFEB457E8FBE4CFCCBFD3C3FBA01EE3
+:10D330002E253F122EFB295C32FEF570E90D0ED42E
+:10D34000BEC7F3013D3C0E2B72259D64001F7E6E0F
+:10D3500070A15CF1BE43E142E7BBE3B1E19AFB405F
+:10D360008E73B8BC6B70D7F4877E1502F62B5EB750
+:10D37000654F02ADCFAB2763E178A178AD560F07BB
+:10D38000F57E8303F5FABCAA2D02E4C72EE4DFFB89
+:10D3900095F81EC37B546E5D46F53CEDBF20DDE481
+:10D3A0008673F0FD1101949B0ADDC64730FB258E84
+:10D3B000CBA1A3030253513F350A76E4477F04D340
+:10D3C00057144F70BF4BF3C4AFA773BCB0B8522310
+:10D3D000C36325C51BF0F3F4265EAF6376E02D4AE8
+:10D3E000BD5EF0390490ABBB64765F8C40E2048E86
+:10D3F00004957E84F3D5EC04159E77B433FADF28C8
+:10D4000038F1818FFEF743F0DC2BDD333BA6AFF420
+:10D41000AEC0293E428BE7FD11AD79E3FAC1F99B1D
+:10D42000E0C47B739A62F09CE8582DBBFF2595BF42
+:10D43000A7E70BF03BD4F7D1CC8485437EF38C086F
+:10D44000CC0FC57953985DA6964FFA7B80BE6FFED0
+:10D45000512569457B2C94C7E87EDE04E3CD10346A
+:10D46000F94E1009033AFF09C6BFD57C81F14992F4
+:10D470001DF396EFB22BCFEDECBB2C5E6F1E9C79AB
+:10D48000681E85EFB955A2135CA89B0C8E835920AA
+:10D490006F1E9409F0CBB97DB28BE98128D43B850E
+:10D4A000EF1EC5EFD90A590E1A29BC8FE997A37C44
+:10D4B0003D1F51BDED82580AA91F0FF7E0CC76EE53
+:10D4C0009AE680784BC6FE9570CE392BD77EF02039
+:10D4D000E07335BB07E9C8AA5CF4D3EEBA53407ECB
+:10D4E0003B4CF106EFCF999D7CF0209DF7D655F18E
+:10D4F000786E39CF157F239C63CEDB273A1DB4DFCE
+:10D5000082EBAD1638C7BC66A448DC2AF8DC4A5A60
+:10D5100031BE33AFEACE39B0EE12AA0FC56428F798
+:10D520004F4B84FA3A01DFAFF4BA8DF0BD66EBDA07
+:10D53000B3C60C3A7F11ED0760AF5CC7FA556E10A9
+:10D540009C90FA5DD4F418CACBA20D025E34D34A83
+:10D55000ED5F331BD767A6E3B6AEA3EFD37A31BC3A
+:10D560000FE36E88B911CE272BE93AF1FD09D57882
+:10D570002E5D44DFA3CDA475C39D38DEA275028164
+:10D58000EF034B26243F3201C6DB273BA1FDD0AE83
+:10D590005F1B61DDB7D1F9FAD3F117886DD3A03FD6
+:10D5A000F9A560C7FB87EA4660DCAD0B360C2F544B
+:10D5B0000DC73AE6133B100C923A1F654704FB4E29
+:10D5C000B86859750DECABCD1B9F6C40BA3A6B0433
+:10D5D0003D7E8CC2DB4D873C6A64792ECDDEA3C6CE
+:10D5E00036951CFD282215DFBFA3311BF3261692AA
+:10D5F0007CCC9B7057337BA47D65840FE26AEDB2CF
+:10D600007D083C6F5E69C2E79D2F31FDD339B80DAF
+:10D61000E3DB27D6C904BE5F5CB12EF569C0E389A0
+:10D62000CD32D29BF82CCB1B287E89C5C99AD7B1A5
+:10D63000714F2C35B27BB5A09DD68B5F54F20AB4E6
+:10D6400072ACC8518A724A2F97F4726BD193D54647
+:10D6500020D91EF26AE9749457A554EF00A1F59001
+:10D6600057836A306EAA975795C4A2C8A974885F79
+:10D6700016960FBE6D2DD0F1ADEC838156FF6B5F1A
+:10D680003E057AB7CC4AE04985647F5A6074418090
+:10D690005FE6356DF912F8A0645E04DEC7751CF014
+:10D6A000007CB3260ECFAF8B7C85086F252FB77813
+:10D6B000AD96CE95F8E35CB7485C6AFD5512455CC3
+:10D6C000AA7E87EEA3F44AE7B9BD51F081A83C7465
+:10D6D0005FFBDEBB33B06EC7752DE3F6C11A2BD2EC
+:10D6E000F3A19F9F5D09F47ADBBD02017B9D78DD8C
+:10D6F00035A00F2BD60A0E880F17DFCBDE2FA6EF33
+:10D70000C3BA0FFD9AD115A56F07D07FC5BAC7F66A
+:10D7100062FF0D8203C63FB4BE10ED8912AF48B060
+:10D720007D433BFA0F544F619E59B3574C00FAAFFB
+:10D73000B8DF64075349A123852EDBF97D08C4ECCB
+:10D740001C338BBEB70A1615DF931EC50221A84FE6
+:10D75000814E2ABD8CCEDA5F929D403617A74BF6DC
+:10D760001DFC09AE5FC567E74C87EF748AA97E048C
+:10D770003A6D5E976B043BE2844FC0FC8A9E74490D
+:10D780002C6A3B4AA1CB670526AF7BD0A38E0E7BCC
+:10D79000D01DA74B85FE2851A35F59B64F26F0FD3B
+:10D7A000BD9E1EDD72FD8D90FF51F832DD0F5D6F65
+:10D7B0006ECDCFD15E57E048EB09502F9258DE8FE7
+:10D7C000C20FE512CB0FFBDEEBD3CDBF2982E7877B
+:10D7D000013F882C7FC94FE77D7BF30B982F79663B
+:10D7E00053FB7568DFBC41E900E0BFD94AFCE87F24
+:10D7F000F8500E953688986F4D247FE62C95DFAE55
+:10D80000E4BF2CFE8315E15DBAD5E4CBA3EF976EA0
+:10D810003F3A06F311960730BFC7BB4960E71FDEEA
+:10D82000B631F0FD50A9C4F270F476C1F04816E7A5
+:10D83000EA782DAA00EC36A18EDDB3575A7F936C9F
+:10D8400052C5750745CA382FED87E7635E8A67B80A
+:10D850001F01D6A7BEDF4DC9BFE97891D15F69A38B
+:10D860008CF65C69DD964EC8C32C3D6C423FB7B266
+:10D87000EEAC11FCD8DC3FBC84F7F355368A9A3CF9
+:10D88000BC1EF96F75A2DF04F95B0DE5787E43EBF2
+:10D89000ED58AF0F9F077AB13CADC57FD8B1DD4BD6
+:10D8A00041B8F895DFD9F0BEBED68D36FCEEA9EEB4
+:10D8B000C2F9A73DF2DDEA575F30DFED34FC4109E4
+:10D8C000EBBA485DBE601D936B747D99F961E2C44B
+:10D8D000417BEBA52F9F837CEC8EAD7F7B0ED65BCF
+:10D8E000F65FE79E83BC1AB233C20EF648E5A60F78
+:10D8F000309F5579AF2492D97F9D2FFE0EF3803B48
+:10D900003F343961B4CE1D278680BDD1B9E5DB0433
+:10D91000C8EF5DBA631AC673966ECB4D2461E205FB
+:10D920004A0974EBEB431EB21E5FCD0DCD98FF7319
+:10D9300086E21BE443307FB1BE9CE5833A78DEE2A9
+:10D94000E6F0F9DE3DF2141B665D3F19E46203B3B5
+:10D950000B2E9AAF7880E2F1F23EE06FF36A2E4F21
+:10D96000C2E3EF0CFC41F15413A9CD57FCB261E1C5
+:10D970006F9E81B686B85EF315FD7D809B924F3E0B
+:10D980002BD2F55824F0CDD6DF637E28E02DCF01D1
+:10D99000F2F9CB2110173E290730FE10D861C2EFF3
+:10D9A0002C4B771C42FEE9DCB61FF3B509CFEBEE3A
+:10D9B00024C11FCBC3E5B19ECA0D5696E7C8E10F3F
+:10D9C00079900E1B3EE7F98E8C8E953CC8DEF21FD7
+:10D9D0005B2253F87D2A2C4FB37CC3C73CAF308405
+:10D9E0002F6102E0A9FD8279A50A1CEC00872BD4E7
+:10D9F000F9BCE1F34C8379DF1C5F803F90D3C17C9D
+:10DA00005D5A1F04F99B3EE11009230F3AD7B33C3E
+:10DA1000E04E39FCF7CC4A7E6FB39E4F7D7DCBEB59
+:10DA2000BDD8FABF2F7C1A221D38AE1E4E1DE7C38B
+:10DA3000CBF1E39CEF7FF0F7216582FEFB93CF8172
+:10DA40001ECB1BDA8D789F89E23FF1FD76F0785A84
+:10DA5000C72611F33E6BEA9B518EEBE545053F2748
+:10DA6000D1AFF71BBEDE8A46A6273AB65A7D163AD4
+:10DA70004EC75BAF213D576C6EC7BCD3BD75AF18A9
+:10DA8000DB54E7CBA0277CAAF577BCBC6B0CCA6D36
+:10DA90007EBF987E1E63149BA7B229FC3C959BCF4A
+:10DAA0006AE659ECAD37DA2D179FEFB4E4BA09C630
+:10DAB0003BDDCAECA5D3F5E20C5F98F94F71BD4987
+:10DAC000482D3B0FA5FA12EF59B3B27BD5445B2426
+:10DAD000DA5F4BAD130E47F783D288792F2BAA79E3
+:10DAE0009ECC7DCE24C0F70AEBD504D6BB12E0ABAA
+:10DAF000F2E365BB9B80DD2627E567A8CF5994F547
+:10DB00001BFB19884F85FFA5D61989E07F12C93BF9
+:10DB100008D6715DCAD712E8BF560F8BDF93F34763
+:10DB200087C1F356C9BE278E8EDB3A557042E8B5E1
+:10DB300027DDFB347186992EED7DB1F80D1CDD5F7C
+:10DB4000B7D380F6A0D5E0B7D32EC41AD19A840EED
+:10DB5000AC8338A404FC1402F3211EF49867C1FDC1
+:10DB6000C83642CD53E8E79434F79F444F9074F79A
+:10DB7000A19003C328BD5A38BD2A71392BFB9B8E57
+:10DB8000DB86F7ACC4A4916A20DF355637DA0D4F37
+:10DB9000F0FB69E86F24E441C49248A7FAFE263AF4
+:10DBA000AFE6FB383AAFA61EE3D2D6E36648C7C25B
+:10DBB000E99738BE8EE9A205E11033CDA0F86B7964
+:10DBC000C31342EB8E89274E3FB45F6BC1EF012830
+:10DBD0007B79D5FBB058B4EBA6EBD3C889E8B43653
+:10DBE000AF81AD53F3DC4E1C02EEDFA57D4ED7AB0B
+:10DBF000A917467179271109E49DC5DC4A38FCBB99
+:10DC000035F0BE5FDA373801F043B85FED2590CFCD
+:10DC100012CDF741E7D7F4B7437480CDAF1D870C21
+:10DC2000B2ABBF43BD9CEBBF5196FC2551949E32D5
+:10DC30008756616276561249C3EFA59BFAA17C4ACA
+:10DC40005996837927422DA3AB616B08F2CDB000C2
+:10DC5000CF9BBA3F12ED5193997823D2E17B36E204
+:10DC600095D361161FCF43702C37D0A1A45594D6FD
+:10DC7000E87B4D811CC3428A847A68A2E35746B987
+:10DC8000AAA3289FD6CC742719C6C2F6DE5EB93B7C
+:10DC90000BB9F65288081AAAF7EE69198C2204EF1C
+:10DCA000F120DEBD7B80C66B953A15ECF09D7F6D53
+:10DCB00064B0EE3253795F9BC2EA8F3EB47725DCC5
+:10DCC00037936ECF7F14F649CCF65178DEE58FD5C9
+:10DCD000DCF3DD9B7E51D63972833F17EE05BE3AE9
+:10DCE000C0EEF51D6E0D7E778F7A78A345A9FBD126
+:10DCF0008FC86FD88F72ADBC7E3FB61BA04ECBA134
+:10DD000071FEDC81749F2F471D9A9674291DAFA167
+:10DD100030093ED97F35EAD01EF8EE3004878F57A0
+:10DD2000EE1E148283B4FCC33D2D93D570F8700FA2
+:10DD3000D8217D85C3AB0F7D8870E8EBBE295D6C73
+:10DD400007BC5C936DC0FBD6AE386CC1F80AFD45CC
+:10DD5000A03EE2E3ACEFE5BB6CC51FA1E3EC54D3FE
+:10DD600097F29E4257BDD14D2AB18F62F76C6AE996
+:10DD7000A72BCAF536ACAB25CA758F351EF78FF7C2
+:10DD8000005CE3763BA78E0BD135B1B8C7C1FDEE81
+:10DD9000A32CF35BA354F2F29AEC25620AC4C98166
+:10DDA00017E243FB895FE68D1841F719EF3260DE19
+:10DDB000FC288BFB20CC632B08F82177EC0AE21EB1
+:10DDC000278821BE50E6ABD9C1FCF59A42836F3952
+:10DDD0003BEF1560BC107DB4E9E823C0E8A3B11D9A
+:10DDE000E9A3A2A99DD14763754E64063B37033F63
+:10DDF000BF9604C602DE3BA2BE9A2651FA1F1A1530
+:10DE0000A801BA91BDE7A6E55D8A703D1D163F7C6D
+:10DE10007DCABE7AC36F6D4BCA4369E04FEE33E0F3
+:10DE200079970237A55F8C85E5C5B658DD5F03FCA1
+:10DE30002A27B4ED85ED6F6D791FF3366CFB6ED834
+:10DE400005EFDB66530C3942F3D6EE5B8EF767D7EE
+:10DE500006D87DD8D124E005BDDE3B3C18FF04E1A7
+:10DE600001764F1AC0A31DF96513FF5E2CAB5170EC
+:10DE7000819E1F1AC5EE0D89B4B0F3EB211611D7A0
+:10DE800039C4C2CE59E2F7BD2582BF9575BF01FBEB
+:10DE9000C74399A6DEFFFDBCBFA489AF2BF854E8A9
+:10DEA000894AD228B87FE44C8C3BD1A2A19FD8A844
+:10DEB00014D578CA7B8F7888F30EAA47AFD83DFF78
+:10DEC0002ED0AB947EBE00FC04FB8D9623006E4AE0
+:10DED0007FA0CF70F8A1EF0D87F9601EB017B6ECE8
+:10DEE0005E22E23D1A7DC46B26DC1B49FB6746912E
+:10DEF000AAADF4FDCC685A423D8ED713797D202B14
+:10DF0000533F711A04FA7C3D8FBB4EB6F0FC31C909
+:10DF10003EEA86D15067765C565224EA05856FE169
+:10DF20000E0838B796F8F9754A20C5007853F858A6
+:10DF30000A18FC56AAB452248701F218DEF1D07DEB
+:10DF40004BBDCB9DAB2F65DF71EA9FCFE4EBF9C1F1
+:10DF5000F6F5173DBEEF9E09F02D37B73D7203ADC4
+:10DF6000575C7A0ECF079747555C79A17B2FF4EB6E
+:10DF70007FE7FCDB5140874DDF98C27E0F55C3E140
+:10DF8000D6E229C0F732F9BD2E2451C93356E5B186
+:10DF9000421BB7CB109529F81CEDACFF401108F8D7
+:10DFA000F44AB1F07E54329E1F4ED1E5ADFE879FFC
+:10DFB000C5F932C130002571C92836CF37CC4E3271
+:10DFC000D3FFE09C691A3F177B4772AFB0D2F1DEF6
+:10DFD00021EC7C3533AEAA19EAC4C4C6CF26DAFBDD
+:10DFE0000A32136BA7C6C2B8D1C918DFCA35EBDA3B
+:10DFF00053BD12C869929A8C7989D388CA3E637AD4
+:10E0000003EDEE08BA2E90E3D78C2C744EE5EDE7C5
+:10E01000E8FF434DE4F6992A7FE32AC75CE7548D75
+:10E02000FD528BF701FDE99FE2EDE1F22C3EE3FCAE
+:10E03000DFE2C977C2F9B31E9E390EE17EABA3279A
+:10E04000DCF570D4C35D81AB1E8ED99F38A7C68620
+:10E0500081931E2ED348ED48D0630ADCF57079C752
+:10E06000CCE8E29D3413DEABF88EC4E0F80E352325
+:10E07000A11EA49B6811EF01CE8CE2F53747B0BA20
+:10E0800082EFA864C4B71EAE7A3866C6F1F7E358CB
+:10E09000FFBD002F09E502E247A19BCCD4AADD31E8
+:10E0A0002A7A50ECEB691C2ED4BE46FB3937DE8A47
+:10E0B0007126B0AFA72584E0965BCED6953BDCF207
+:10E0C0003CF8A9F475BCBF720AE13FFF143C2FCAAB
+:10E0D000E45505CE53BED1DAC9D39AA69F8238C380
+:10E0E0005093FB7EA0CF801083E77514EE477470C9
+:10E0F000D7BE67D7D6F570F803FC31B127BC143A08
+:10E10000FBC0C2E34E03C820B097C7BC96110DF206
+:10E110009B34C5868D4B5C71383F380EA757A4637E
+:10E1200081B883CFEDA93F428EEDA35A5225C73661
+:10E130008BEED396F89E724CC1D3648E87C9C4BB54
+:10E140000BE24B9389F445D01F480EEDBF5BD9E736
+:10E15000403210F67983C5C1E43FDF6770DFD4BC7D
+:10E1600084F9B3F8FC59660B7E5F4302524710CE28
+:10E170002978DF91D7181B5A8792BF4F86541166B2
+:10E18000CFCDC37BAE295CC87751A17598AC828492
+:10E19000F7FDF0759CA9337B218FAD5B7447819DA2
+:10E1A000D721EC1B83FB93FC2340FFE9DBCF35EE4B
+:10E1B000AE8076DAAF08FBF1F52F1659FC21B0C31B
+:10E1C000E47B3EB9773B95B235EA09857EB3E0FB47
+:10E1D000D4CB81DEFD0361DD5340D5D172E759F622
+:10E1E0001D437663BA04F3ECE96679FF39C42581EF
+:10E1F0007DABA7DFEF4BA7A178456008F8298A5DC2
+:10E2000036D5EA1E69A5CF57F3EF669BCE8E18056B
+:10E2100078F9C1F474404B4F0A1D51BA1A0FF0EC53
+:10E22000CAF8FC6930C7DFCD3897007A51B1DF43B7
+:10E23000768A6B02ACA7373B7E89D53DC57A013B18
+:10E240005EB1672EE68790DDD441A674741BC7CB00
+:10E250003C73ABCCEECD0F60FEFDEA48E55E3B477C
+:10E2600024D891B7AD4ED95407E786D52CFE7E6BE6
+:10E2700095ACF183DD90DD86EFB3FB666F5FA66D35
+:10E28000FF4C60FE7EA157FB9C581234F7EDF69CC4
+:10E29000D7E035C0BCC323313F413FAF7E7FFA7921
+:10E2A000F5F3ADE67ED56A63ED48A7CA2E596065E1
+:10E2B000F650F7AAC7EBE0CABADEE0E7360F48939C
+:10E2C00054F7ABB5AD8E2C08776F8C329E02EF7988
+:10E2D000C4CFE20055F2DFC3DD839BE566F181DE4A
+:10E2E000E61D16988A76A0E149BF08F6FCB0004109
+:10E2F000FB3B2BE0322CD0F801CC4FEEE107C0BD48
+:10E3000026B45ED6B08BF901F5D5E84F94517F0263
+:10E31000F4CC7A389B1EC0179486FE41D0DF85FC72
+:10E32000A92CB8CF92FBC312A597D45AD67FA3F5D8
+:10E330005DE36A09FC5577924C2963E3C3EFD798F4
+:10E34000A95F55934C2208F5AB5E78F8FDE96BC0E8
+:10E350005F8E7509707F28ADD758FAF7DDBFDEF8FC
+:10E36000F0FE1AB86F94FA65EBAC2A7FB737FE78E7
+:10E37000048C910BF047BA3D7F23F0A112AF688A5D
+:10E38000E07C1F11A4BB6880974227572F9B8F7E8C
+:10E3900045C425E787409E5816C7FF162B8FC346F6
+:10E3A000B1F79F12DD5B90BFDF3A3F02E2CBEF8C0B
+:10E3B0003C8AFE5C9395C5E7F7794AD07E52F0B966
+:10E3C000CB2A703FC93F10F8EDDAF1CD71E09764C8
+:10E3D000C902DE43DA24FB9E4CCF007934DBBE82D7
+:10E3E0006E296BA211BF136B8AF00FBC5B65A7355A
+:10E3F000F1FB4C9BCEEE1DA8CE631E66CDDD6545C0
+:10E40000FAF38B307E56C6EEC3A0EF7BD32F21FDEF
+:10E41000E112407F90F3FB13F0FCA8618F0DE24204
+:10E420001DFC7E82330DCD09F36959BEE52F36F010
+:10E43000D7DEE7703823B5E23D4A65DB44BCFF8395
+:10E44000CE9B700BC4A71B1664B2EFF7D877678A10
+:10E45000FE4CFF67F3C07C1634C4EFC8147B72B265
+:10E46000D9EB83F535558B182F9EACBB376C0ABFA3
+:10E47000374C6F5F9EB42A71E904CC875A6A67F300
+:10E48000F4C64F59DFC4129F8ADFB224BF08EBCF16
+:10E49000FA2681C01597675A529EC8033F9EC8CE80
+:10E4A000E130AC4476A3FDCACF9FE86F37DC43BEB2
+:10E4B0009357DE6C3837EB4A2466FBFD970960778B
+:10E4C000B9FBB1E022D3078A7D37E51B6D7C556F20
+:10E4D000E7E6348DBD7F204178B37FA722C0EE559B
+:10E4E000EB61FF06A687B57B09790CE190BE2DF59F
+:10E4F0001AB84729FD8F063BCCDB027C110FF83C94
+:10E5000087F7FC5410FF8DD05ED120DAFDB07E92EB
+:10E510007119F09562372870693CDF6C1E43D79102
+:10E5200075D6605F4E877833F005FACFE3FEBC2FD7
+:10E530000EF4575340C27382ACB3BBA316A8E46079
+:10E54000D379033E7FF3FC5BDAE781D8CBE0BD2DC6
+:10E5500006E617EFDEFBF728904B6F9EEFC6F182C1
+:10E5600076434FBB18E1916B15837167B55D4CC461
+:10E57000AC0390B7352D9AAA31A177BB37FB137244
+:10E58000BF95F4B41F72C01E11C3D8111CCE743EC7
+:10E5900009F8486F575C6EE3F1E6C1241DEEA36CE9
+:10E5A0003C1FB718BF1F6E8AB22F477DCCECA5AEBB
+:10E5B000DDA71FBF069EEF13D9FD11E745E4A7B7FE
+:10E5C000762E1EDAA6E25B2A39114F5FF53FDBF9A2
+:10E5D00006EDFFD59E481647979C97A9BF7708F58B
+:10E5E000F77178F907B0F338EF00B8D7E907DB2FF8
+:10E5F0001D3DFCFA3C1BDAC381E9A01E46AC6B371B
+:10E6000002FE5BACF9D7D990DFEAA3002E5E92330D
+:10E61000904C80F37A92037415A82676F027B6B54D
+:10E62000180C80978C8DC998A7B3899F572EAAAFD5
+:10E630003526ABE862113FEF3A297B87C4AA9E1FBB
+:10E64000B031F972724FE96F304FE34313191EC6B0
+:10E65000DE6CB0317DFB8AD17BCD66E877C480DF8C
+:10E660000DEDDEFBFA5EB8CF78D161C75888FF3D6B
+:10E67000627360BFC67D9B6A20CFB7F113D052543E
+:10E68000AF6C28140D74DE378883C5EF0E18D01FC9
+:10E690000FC63D892B0EF6F9105FCF1B2D06CDF965
+:10E6A000D81BFCDEDD7B6D32B62FB18988C7AD2D5E
+:10E6B0003971A0375AACEEBB6DA02F8EB5D5C01204
+:10E6C00094789F62AF4D3CB0F59AD1F4CF891D0686
+:10E6D0003BA0DB71E07911F6EB3849488C407AD8E1
+:10E6E0006F743C8F7ABC373AD878741D6F01BF2A9B
+:10E6F000F0A79AFFA1345A7FA3558A85FC2E05FE08
+:10E70000CA3E94F91DF5C4B5DE82ACE4DA7A81B86C
+:10E71000B3925F3ACE4E947F2F01E9D268733D6A7F
+:10E7200063F60EDAD727F730BBE815AE474952E15A
+:10E7300050809F82A77A1B8B332AEBE96DFEDFDBCB
+:10E74000989E54CAEF4BD79B648717E9661BCB0F83
+:10E750007778FDE654C8236B4CC57FCF499567FB9E
+:10E760007BA4E793DA7B051BDB0C06F80EAC628713
+:10E770001083E66D1FEDEB209D49F5487F8D8709DD
+:10E78000F27169DD9D2CEE48E50DBF7F0DCFD18183
+:10E790007FF8797A7F8196139BD6AF1888F0F5DBE6
+:10E7A00080AF4270A27C036555AD11E875D1525619
+:10E7B00016F373E9456BDDC89F45EB587EE11E5BA0
+:10E7C00032AEE70CA75762881C00F9272E0E7F6532
+:10E7D000DD799C6E4F353CD10CF352FAFA13E0739D
+:10E7E00052E3634FC372157A3DB541C6714A22B5F3
+:10E7F000E7F6AD7CBC6D0718BD4FDC20E7C0FD5FC0
+:10E8000013BDC40E71EC37366C14417EBF01F49C0D
+:10E81000CCF81CF4EDC93D0F46FD02F45CBB814011
+:10E82000BCFC152329D9A2E28BDDEB5FD5F06F6923
+:10E830005DF53518976F8B1540CE2B7CABC0FD1561
+:10E84000A3F32AE4FFEB74FC3F95BD2F473BB0DFF9
+:10E85000139CFF9F9841F99F3E8AD91023C038AF7F
+:10E8600018C3DF07F7F50FA4BFA05C6DEB2157BFFE
+:10E870006672B5CD964AE7AFB8B61BE30CC1F57129
+:10E88000BA7962AA4237C902C0BF96627018C08BBB
+:10E89000C215E899DACDB7DF90865CD922E1390F4D
+:10E8A0003F47E2F91FCA77020ABF86E499C2B76EF2
+:10E8B0007334D8D553AB56805D1F97E745FA3C2596
+:10E8C000B887C6527D760AF8388C3C38C1E5C75700
+:10E8D000B2FB62F7EE0F007A2EA11E22EC87AC137A
+:10E8E000EC8017A5DDB18EDDC33A3C5AD09CBF2B1E
+:10E8F000F51F0CEF408FFB418747637C3A60843CF7
+:10E90000D5113EA6C7889083FC400C570F003E5B94
+:10E9100044F5D7CD2AFD754AAE453A55E0707934B5
+:10E92000935F5FC5B07DFF95D38515E285AA732FF0
+:10E93000EA904802E36751607C2EC2F8A7F64CBA11
+:10E940000AE9FDDAF0F46E07FF2A16FE3DA7F54846
+:10E950009F3133ECF81DCB1392332246631FF9B07D
+:10E96000DCBDF157E8D701FD02BFF746FF2540FFA8
+:10E97000240CDDFB28DDABF0A7D001A58B6BA255E5
+:10E98000F2414F17CA79A302975774E7954F47335F
+:10E9900079B080978E5EF26694FDFC603C9FEC81BE
+:10E9A000E7F90CCF21BE027C2BF2E16717E1AF3D06
+:10E9B000D1766CAFF97401E6A9D4F273AB7A3E9FBD
+:10E9C000B2EEA5D182E67C4B7FEE34CAE2BE2B5A72
+:10E9D000773EEA480BD1C7346ECF2ED968C273FF99
+:10E9E0002DD00278DBCDFEBD6CE53DBB440D4F0A5A
+:10E9F000EA15D14C8E2BF4E1586624C3A8FFF255DA
+:10EA000072E16EC8FFF959AB376F34DDC716A377D3
+:10EA1000F6B5E80738AF82F1AFCA33D8211F24C654
+:10EA2000651720DE81240A7CB88FCD332ED5791965
+:10EA3000FAC90EE73890070F737C29F855E0D09B90
+:10EA40009EEB0DAF7B387CE279BB5E8E1473FE9E2D
+:10EA5000C2FB5D5C8E7845E0271B712F1761FD5965
+:10EA60004CFE05E54816C173C9977572E4E59F5ED3
+:10EA70008EBCAC912313DAC2CA11FA0BCBFFF11B87
+:10EA800016A21D4B0E87B7637746333D1C0FFA93D2
+:10EA9000F68BF7B2F3DE8739DD528AC4BCC9DA0DD2
+:10EAA00026CC1357E4906D36C9817FAFD906FA168C
+:10EAB0007ACD761F9E0CE7C54946079C5F9F92035F
+:10EAC00088F753D401AF45FAC8C7FBC7C3C82302B0
+:10EAD000F112EF4783D0EF9C2636219F2C994650A8
+:10EAE0007FEEDE7805D255495E8A00745B5A1723A3
+:10EAF000407BEC54BB01E494B28F2B9619C8B071E3
+:10EB0000C80707D472E40A6F15FEBBCD43E3DC49A6
+:10EB1000720C21471F3DFB3375BCA88DD6D5F12261
+:10EB20005A7FE0FBC48B8E46071E8078D13F6CAEC7
+:10EB30007698779425FF28EAB7C42A91A8E4D6C529
+:10EB4000ECB71F4A2F953C2E455AA9344ED0C481AC
+:10EB50006FAB73601CF82B584FC580E34FC37078C0
+:10EB6000AF46587B9BADA31F970BE41382F8E89741
+:10EB70005F2542FC45913B067BACE22F0B9097A1B1
+:10EB8000F0DB7F031C7DB5D7008000000000000093
+:10EB90001F8B08000000000000FFCD7D097894D590
+:10EBA000D5F07DE79D2DCB2493C9427626ECBB039F
+:10EBB00009ABB14E086090040710448D380990B03D
+:10EBC000640391D2D6968120068A182BB554B10ED3
+:10EBD00014FA51451BB61ADBA013401A143456AD73
+:10EBE000D8AFA561911D8980FDD38AE53BE7DC7B29
+:10EBF00033F34E26026A9FE70F0FCFCD5DDE7BCF4A
+:10EC00003DFB3D77492D63793B22199B90B350ED35
+:10EC100006A9C9CC3C161B831F2F6343793E7A0893
+:10EC2000E659986B20636BF27579DE018C5DC79FA6
+:10EC30003BFD69A2153E8E676CFED630EB4933B5BD
+:10EC400067D7E17F795D8C265F599F643DD9C79F67
+:10EC50009F8FBF24C1FF334CCF12182B63E2A7E173
+:10EC6000CBDFFF7018B4C7DF55C6DE54DD89568090
+:10EC7000A7DCDC12D5DDCED833F9C713DC91D45232
+:10EC800087DF3D22C67871B9E3BDDE718C79DE5530
+:10EC9000D916C80F36193D4A34FCE264766B82E817
+:10ECA0000F7E9406C5671904F97F43552C6397FEC0
+:10ECB000ADA3F4C59FB8F232E0FB8A7A9D6339B404
+:10ECC000AB685018CB62CCD19579CD198CD58547DE
+:10ECD0000D62D05FCEBE48A701CA2F2966AF298337
+:10ECE000D100088741C23FA2357D1BD4573798D841
+:10ECF0006AC85ECA61AC19E1D53BA2D9003F7E0764
+:10ED00001D7EA60FCC00CA6B1D2E0B639BC278FF25
+:10ED10009BC2647B7B3483B4DB92D1EC04C0A7D765
+:10ED200033160DF481C48369F6926E03F499301F93
+:10ED30003DF318804ED9AD3E15F1D2ADD5AE6391FD
+:10ED4000FE71F4AD8CE6DB4D6FD73960FC3A81F78C
+:10ED50009D4D3B543DE073D898DA6A15D2D228F71E
+:10ED600058C4F3A8ECAA6A2C8FCDF7A86E689FA5AB
+:10ED700054EDB3005ED878E6D802E5CC07838F84E3
+:10ED8000FA16D61805D998232DCE28281F75C6D96E
+:10ED90003800E61DED620AF6C7D8321ABF5FA4CB71
+:10EDA00085FDB238A75200FD0CFB0723BCC87E7658
+:10EDB000368D56EC006F5CF318C51EC05F304DE217
+:10EDC000ABF5CCFE53ECD77348E740BADAEB987357
+:10EDD00023B4EFFA72BF312CCADFBED2AAD078B703
+:10EDE000BBDDB94646F379D80ADF8F9CEEDD6700BC
+:10EDF0007886CFF1EC33DA03E63397517F292D1E65
+:10EE00009A47D211770EA68B2D31D4CFA833BEC628
+:10EE100001D0AE4B15CC07CAD39A3F5410AF6955F9
+:10EE2000CD0AD27167D35E8237B5793F4F8111EA3F
+:10EE300020DD01725517308FC5161DCD63B145A178
+:10EE400074E5C599892EA87FC4EA5E6C19EA9FC74C
+:10EE5000CA1C776215F4BFBEA95BFB7C7B02BCB702
+:10EE6000C1678827D9DF72AB91FA69B2B87F84F3A2
+:10EE7000AB9CDE7200796F47D39FA3482E1AE288BD
+:10EE8000BE09878E133D129600CEA078FDA1850A9B
+:10EE900083AAF5854033A5239E27B8DD8E31998856
+:10EEA0006F809FF8C71A3109F8F2628CBB06C791D0
+:10EEB000ED2714D922505FB4E7C577CF2E658E5960
+:10EEC0003D00CFFB8B77B26E4877F712A47B7BBBFC
+:10EED000818F87213F318BB316FBBBA4B0E938CEBD
+:10EEE0004B9842F94B069E97F8FAAB95E3EB11EB82
+:10EEF000A4C596788E272BF0F14B61BC5DB01E7ACD
+:10EF0000D7CABFB30B7E61CD9C5F701EA8BF64BB28
+:10EF1000DDA2DFDB9DEE5C3DE793CD08E7C811DEA7
+:10EF20007DC8B7C3F33CFB90FFD398E0933CCE275A
+:10EF3000C1FCBECF6AA37E469D696588F72C85B962
+:10EF400002E92ED3D710AEA1C8DFA3897F401EB639
+:10EF5000E378C352AA54038012C7AC135877C6DEB5
+:10EF6000B6DAA95DE608E73EE437ABD345F27C208C
+:10EF7000C24AE52B33387FC0F77F40FC05CBD32E48
+:10EF800094A3017E398A437E8CECC88FBF13F0BCFA
+:10EF90002DE4A563FFEE3F61FF71CD3AA7029D0C02
+:10EFA0003F12E965D074F8A22A15E18F63C0FF0013
+:10EFB000A06D8E3507E52CA5CCA1205D9B225C873A
+:10EFC000ADD40F23BDB93247E7AD86EFE6463B89A6
+:10EFD0007EDFD83EEC676636CC6F1FC01EFC15E1A5
+:10EFE000037BB0B608F5F46FFF69443D6A97F2D72A
+:10EFF0003424A238803FAE48BDE0A7F771D20B4160
+:10F00000F40ED673C1F4F6EB05AD9E037C5DE0F41F
+:10F010007067229FC5352F52B97ED0EAB5CEE8D1B0
+:10F02000413F083A5C8A707E81F85C0C3288E37A52
+:10F0300046B33E58DE991D0E8B89A476FF453B1CD6
+:10F040001613DFD10EEBCCAD0715C04779836A5795
+:10F05000610AD58FD99C48FF17EB148709E5A441B5
+:10F06000257E78716538D94B09EF67BBA307B1DB03
+:10F070002015F2CFDCDDC98E56C688F1ED9087F100
+:10F080002F5979D6687527C504E893171BBE084326
+:10F090003CF74F64034EC6620BA7D60E830829F0D7
+:10F0A000BD097F5310AF836B5414AC69EE9D269558
+:10F0B000E8D61DFB1BCE5AFE9C0D70BDBC6DB4CEB8
+:10F0C0001DC837F55767EC05F82B23B85DBEB4F7BC
+:10F0D0005A2FE433597FF79262D27B3F072B1913E3
+:10F0E000A01FDFEE7382EB6156683DD51F87762A3D
+:10F0F000D723008551E63E7AF427D47087AAF527F6
+:10F100008839AA7B027E107F8DE184BFEA9E20773A
+:10F110001904E748EC7FBFC5C892A0FC0AC823B613
+:10F1200093707F03784707E2D10F6FAAF55484E00C
+:10F130000BD50F5F3B5D900ED0BF6AD1D33C2EB193
+:10F140007007D2B3CEE864487FCF51E11F08BA55AB
+:10F15000089EBBD430F4881BE6F7E29154077E7F0B
+:10F16000A9FE4A982E12FD46F7149C979AD61A8546
+:10F17000F6705FC395BE2D0348BF4DC5F22B874E79
+:10F18000D8DC03BED1FC6684A687767E95FAC89A41
+:10F1900040FF50617C7EC17CA43434FE4B1944F2A4
+:10F1A000C7501F7AD299B71AE6BD72A0E0A77B9923
+:10F1B0001DE53E98DE46ABAB2226406EFF15EDAA5C
+:10F1C00042B8709C942134CF85981F747866A6410C
+:10F1D00087F31BC3D06E4A7F0FFDEFB0217EFF4E39
+:10F1E000CEAF7DFE3DAF0D3AC468BE3FC67100F89C
+:10F1F000E53A80AF128CC1EA8CC079FB881EE562CB
+:10F200007EE5E6489F0AF361BB0C175AA41EE8D6B8
+:10F21000117EA04F0DC2E719ED38E246FAFE35D255
+:10F22000518DF8D1375BD15F85F9ACC67A36A2280B
+:10F2300011E7DF2FD2B905F5FC4BCB18F1F3A55739
+:10F240009877134C76FB7E1DF1CB46D68FF8BE9F88
+:10F25000EEF20C5724C9F33A843BABB956877AB720
+:10F26000A7D7AE437DDAB7B94EA7233E70FF2286FB
+:10F27000FCE49957F4005FFF6D55EA37E4076F68C7
+:10F280007EEF40AFCD81F49278CB167C908D7843A1
+:10F2900083D0AABFD062F6E30DE8C3526C1DFB63B6
+:10F2A000AC251DF1D4F8FAE95E2DD05FC51BA76728
+:10F2B000205E2AFE60222618F387BED1C8EF9FE5A4
+:10F2C00084F6672E2CAD72E8C19F7A25A61BD985DE
+:10F2D00032D66C443FA1BC6E81431FA0CFA5FF7600
+:10F2E000C8D09C8FFD1F1AAAB26580E72B8EE15D06
+:10F2F00058083BD1EE2FA1BF06B02F47D811CFAF92
+:10F30000674573FFD146F620B8FDA1A5731C637A4B
+:10F3100074DEDFA1C161D3BDF07D7E901F743486A1
+:10F32000DBB5B6186E8741213B11CE8BBFB7783D58
+:10F33000507471C847510CFDCC5D1F647A808F2ECC
+:10F34000B2E647FE8872763592D671F9833FCA5C81
+:10F3500066F1CBE51D23F8DCEF78ED70941DDAE75C
+:10F360006FDF17E709C0DF1D4C7FB59DAF33705CC1
+:10F3700046E3337D4B2FA407FBE3D9043BA4F9AF4D
+:10F38000BF15C7F9204187745E24F4DBEFB028C0B5
+:10F39000DFCE5F52417C24F3E56D66E68D0DC8EB50
+:10F3A0009B8DB8042E6F8B645E68B737C612477AA0
+:10F3B000269925A39EE9145F3789CFE07289CF4350
+:10F3C00083CFA6A35FF15927FE706F1B6FD7CEF7CF
+:10F3D0004BC14FD7FBF3EF7CA53EEC0AF15D848D6A
+:10F3E000D3E98A636417F4F7F28DBE1ED610EDE4FC
+:10F3F000FA32184F6F5F2B8DC07E7FDF66CA0B0518
+:10F4000097DEA6FB767ECA21802AC01FDCA6BA53EF
+:10F410006DC21F9C0CF98ABE57C6D1BA5AF28BD066
+:10F420007B77304F23CA6F307F487AF7B001DDFA1F
+:10F43000A372662948B78B3176CE37421EA47C046E
+:10F44000E331389D6064EE50EB80AF62245EC39878
+:10F4500007F4E1231B0D64DF0F5FFBF8DE4CE0F7E0
+:10F46000D31B0CD6E530E49C17F6A53E03F57306D6
+:10F470009BAC0AE44FDB7D3D50EE4B5F505DC80F07
+:10F48000A7373C923013D2F320BF650047E946030B
+:10F4900095CFD9F828959F15725DFA427C7FD49755
+:10F4A00087F7AF4E403ACEF9EA89694897ED466B47
+:10F4B000FFC190966D531C6302F03D6F739826BF99
+:10F4C0005DC7E6E03C245D99E26EAF47133FD5A6E9
+:10F4D000FB76711F9FD6DF04FF72AAA0E3C4293018
+:10F4E000EF8AA157C8AFDF77209CECC99B912AF91E
+:10F4F0008FBEC1FFEF9DDB209FFB95DE41BE9DA02F
+:10F50000F3584167B05CA4B74BCC3C9FFBBA9EFC60
+:10F51000CF5C8B4AF886F69163A1FE7BA2BD0FF407
+:10F520002CCA2153B3D78D847663A30D0CEDD0F78D
+:10F530007CF3F219D8C93BDBF4C75B02E6339AD5FA
+:10F54000F6417F38871982CA9D7A2CCF356BCBC79D
+:10F55000F6B8FB2CFA0F63ADDA72C9778FD8B4FA1C
+:10F5600062DF81733F9B00F32B39A492FF7C237DE4
+:10F57000FC2EC2AF473ABF5DB80DBE3B2CB072F84F
+:10F58000DAE91549C857231486F1ACD3D742CBE347
+:10F590001FA45E6640DF3E7EFA1638E6B6E751DC11
+:10F5A000EF19B1A03D8FF0DFBC1EFB7A3D759B8D3E
+:10F5B000C73382ED46B0DCFCB7EC46FEE0B7D23D87
+:10F5C000164A7F83E985ED5CEF06EB89603B21E11C
+:10F5D0000A86B7BC4DA7B10F5FA11E191A68278C08
+:10F5E0006427BEC3F570836D68C7F530F831842F8A
+:10F5F000CF303DADC3C1DF6AC4760322EDB139001F
+:10F60000D20A6BB708B27F16F77E5B401CAAFFB622
+:10F610005A1DEA8DF6F88C411BA791EBD577849D96
+:10F62000A813FA1CD6ABB4CEDF18EE4ED4E3B8C99B
+:10F6300046C7968C8EF8F948B4EFCCCF957EACBE19
+:10F6400086FBB18F585D9A3819EB93A889FBA25FAE
+:10F650008EF2EDD91B4EF3FC54710D4239D433E7D1
+:10F66000DF6D01F4A93670F883E1898FE576923178
+:10F6700017F907B27CF6E8D07A5C89D553FB9C6712
+:10F68000EF4F47FFEDD3C607D251BF7E1A14E7ED07
+:10F690004C1E9E16F2FAA4B02331222EF014CA1189
+:10F6A000E441DA9DDBE1FB554B5D24573F5D3A9D1C
+:10F6B000D267962EA1FA13B60C1ADF9AF367577722
+:10F6C000C0D3C9352AD989D94657AF18F8EEA459FD
+:10F6D00047F18513559179BB22B19CD17A72F6B36B
+:10F6E00013B67802E27E276C7AA24367F38C8FFD13
+:10F6F00066FABD9CB544A1BD6AE7D7231DECB52DC4
+:10F7000016E37FAC2501DB552ACDBDB6291DC7B751
+:10F7100032677C2CF29791F547B9A90BE7F628B828
+:10F720005D4A2CE7C3BFA11F0BFD7E8A762B849E0A
+:10F73000B10B3A2FB438EDB1A4EF22C95F27B881DD
+:10F740005FBE8C727647B8605DD613D3615D787CFE
+:10F750006EB1C52AF8C3A9F0758EAB5F6C88F85BF3
+:10F7600067F19E6038DE11780D8E03C954C681861C
+:10F77000C6F2F9BC6DB36AE24218FF0E15FFF979C3
+:10F780002CD7A31BC35B3C2ACAC3037C3DDE25DB0D
+:10F79000A3607C2B25BF3607E35F77C5F2B8A52DA4
+:10F7A000CF9D88EBF6E444A303E336372B8F03EABF
+:10F7B0009C7C5FC0AD2338D6377BC27A015C09CD13
+:10F7C000EE1C23A45371310DF8EDC2AA9621DDA0E1
+:10F7D0001D21236B7FB857918B6C689229F42840C8
+:10F7E0001A8672678C724F45BA0C9B55558D71FA0B
+:10F7F0009432BEFF70567177B5019F9C7D2B3CA45F
+:10F800003F5C22E8CF94D1C968FAB3361B08AEAC8E
+:10F81000CD3F9F817C9FB5F92EBD12A08796C71A58
+:10F8200068FE67DF9AD795E2169F9858CF107AEA5C
+:10F8300087825F1E1074D8690CCD7F8B45BB6FAC7F
+:10F84000CF5B405569F5F9E2D880385B45F965D260
+:10F85000E79363ED34CEF3FABA03C980CFE767319B
+:10F8600087078AE66DDD48F1D79DC6BAF1B8EFE4A7
+:10F87000A9D031A4FBFE037F38908C7EE42CFB6082
+:10F88000F423DABF3FF4D24A2C7F7E0E1B8CF84F54
+:10F89000F23EAD603CE69F61B584AF7F6E31B165ED
+:10F8A00018B77DBF6EFC0F21BFBE4CC750BF04CF41
+:10F8B0001B4632E81231F519742338FD510F4ABA4C
+:10F8C000030319911E926E88BFED90EEDFF21AC10C
+:10F8D0002FE19A2AE2DEF3B66E1F8F7C925C6653AC
+:10F8E000304E20E1BA913D7931F6DBD993EFD00E5D
+:10F8F000BF121B222E1DC20EEF880D618783ED2FD4
+:10F90000B3387763BB1BD9E1E182FF36C606ED7FD2
+:10F91000E07E5908BA0D8DED100FDF1F1B62FFE36B
+:10F9200046F1F0DEB172FF431B0F7FC9C8F56FAD22
+:10F930008D3D3C2984BC7413E3EBD6B51AD17EC649
+:10F94000352821F5D9628B51EE1F7E1C1BB05F124A
+:10F95000AC8F43E0F728B6EFBBCDB7175B0D89E955
+:10F960001181EE5BBFEBB0DE0D31CE29813FFB2272
+:10F9700046FBA6F62A46FA0AF25E1E14F42914374C
+:10F98000B0384F93DDBAC1BED59DD61CF283E43E9C
+:10F99000D554ABD64F8C8B93ED9C9F239C699DD8FF
+:10F9A000897F093CC1FCDB70DCB8454CB31F23F7F1
+:10F9B00061E2AA3C8A310BCD11A3F86AD758F7321D
+:10F9C00003B46B1DC91C9B201F5D68CD417D6A9BE4
+:10F9D000E368C4FD9A9517793C7EE502E65D4EFD2D
+:10F9E000F0F93277372FCA17D22D302E1011C7E118
+:10F9F0008888E3720676D21CC7E10A8F0BB0939217
+:10FA00001EBA753E95E8DA1ADA4E05D0D546DF778C
+:10FA100042D7EF502EED7137E71FF78CBB05BE19AB
+:10FA20001877737CF3144C4BECDF048F9789F30F3A
+:10FA30001E0FF82C2BEE26F8ECEA2DEE8F1E8850C8
+:10FA4000BE5DDCA5235E27C485D0776BF2757D484B
+:10FA50005FB3704728BB3A232EF2BF7D5E6486A059
+:10FA6000F72D9D1779F1272D46A4B3DCF790F0060A
+:10FA70009F1391E5150D4A26AE3F73F65DA375C041
+:10FA8000A5C67FD33AA0E3790F3EEE42E403806738
+:10FA9000AC3AA0CE07F277799B9156EA2AB3FF22BF
+:10FAA0001BE3F64D06E6B5537B33B6EFC778FB7E16
+:10FAB000DB563663DCAA1FD37BC47A54B9CEFDA8CB
+:10FAC0006894E37E4D2A5B8DF9ADBCBE8A9997613F
+:10FAD0005C3A7A848ED903F019E30C67F6007CC691
+:10FAE000E6D93479B94E9E2FC68D77256BBEEF329D
+:10FAF000BD9BA67D92BB9FA63E65CE104D3EAD6AD6
+:10FB000094A67D57B0CF81F90CCFDD9AF6DD6B2638
+:10FB10006BF23D6B1FD0B43FCDAA9ECDC6797A9CC7
+:10FB2000CD3D00CE5902CEDEEB8B35DFF5D7D50DBE
+:10FB3000F3A120F9141FEEFFCD166C324BC473FAFB
+:10FB40007AE769FA3DFF6A5E9302F89D5D6B3819AA
+:10FB5000189F217C007E4BEA15F61C8C5BBA5E5B1D
+:10FB60003FA7E1E9952990CEF56ACBE7E1BE9C82FB
+:10FB7000FCAD2DDFAD733D82EB9DED7122CE28E211
+:10FB80003DAC037F44D2B89737F07897EAE91DC4BB
+:10FB90001F5A3AB16FC92F76C12FA6442DBF84D901
+:10FBA000B5FC527A70E7301FEB88FF883E417CE459
+:10FBB000817F017897F895F8B738B47CF55DE19DC1
+:10FBC00031AF91DB0D6DF93FE2B4F1B57E91EEE31B
+:10FBD000A8B7AED42F5271BF8DE5F17DFB2BF55741
+:10FBE000071DB26BF6D73ADB4F3A1717185717FBBA
+:10FBF0004997703FF1367613FB89FBFE85F800D9F3
+:10FC0000771B801FD80887B97DFF30CCBF7F14AC2D
+:10FC100037650A76E3CB38B227FE7DD76AF87A5883
+:10FC2000F45F5C08AFDC8793E772E4F92116C9E75B
+:10FC300029FB013CA8F143F1FC9F2D02D7ADDBF776
+:10FC40002FA4F5963C3FC4C4B9BF107E3FE9EF3AFC
+:10FC5000FC3589FC81F0786ECF23316DF707C4F94C
+:10FC60002E69CF3BEB47EEB775962A7B55DA3F6C92
+:10FC700055C21D9B42D8935EF1DF72FD75A6431CF1
+:10FC8000BA577CE0FAEBD12B07D0AE00DEFB62B9AD
+:10FC9000C502F65AF1DBEB5F444411BFB61E54BDFA
+:10FCA000BDA1E0B2D91E6D033C368469ED884CAB32
+:10FCB000CCC903F4B158AF3DE727F71183DB676385
+:10FCC000FB80FD27F84EE38FAC1CC2FDB5EC786ECF
+:10FCD000DFBF88E4FEC11491AF0C5A1755D670BF30
+:10FCE0006C23F8E90D01FD4C89B750FBA511395380
+:10FCF000E2298EC0D7BB2B3314F227562A0AF921EA
+:10FD000067A24753FDB5B89CC9C43F629C29E8BBB4
+:10FD1000C1FFDA6E1C1EBB388F23FB37C7F3F6E634
+:10FD2000F8D1944E89B78AB8B3B51FF2476584936A
+:10FD3000FA35AAA1F7A5A6C7F379ADB530E9276AC8
+:10FD4000E2FEE384DEC438BF89FBA3F96313FC71D0
+:10FD50007EA6667F688C13F17D853E77A29EBA539E
+:10FD6000D0BDB378BFB38F753F6E27758CF7FB128C
+:10FD700043C6FB1DE328DE0F5FEA715EC1717FA4FD
+:10FD80004384CD2F3F8FC4B7DB8354D44FF54677E0
+:10FD900035AEBB5A7783FF0EC57DBC2DB41F30F046
+:10FDA000507707AEAF5666B0BD16E4B7658CA17F3D
+:10FDB0005FDFA25B1E06F56B3CCC8AF52337F0753E
+:10FDC0005BE97ABB03A7698075B065885F1FAC8B60
+:10FDD0008F21BCD7B74C6EC4FD8135F7321B9AA179
+:10FDE0005A569B1B85FED0061672DDF89490B30917
+:10FDF000397B55D417F1E8DF87A0D353824EA00F8B
+:10FE0000D6229D87B7BAAFF0FD38AE4F4825E2FA4B
+:10FE100074BFCE1B6A3D3F373A771DF2C1406FE891
+:10FE2000F5C35A0BE7B77511AEE7A8DD2E7EEEB528
+:10FE300054EADF593AA607BA4F11749DB2819FDF89
+:10FE400060D7AE5F57A59FC8A87F867AA5F45E8B62
+:10FE500017E343A50D191E82CBA5387AA2BE687898
+:10FE6000DF85F9D2AC2C2BC6239C7F65CAA93EE462
+:10FE70006232AEBFF4EC94D42764C7E368DF69B2A2
+:10FE8000E0B7B5163B3F470D288E00FC976E58B67D
+:10FE900017CFEF7CF46B46FB4B47D4D661D8D954CF
+:10FEA00040CE922198EA5921C52BF8FED5BDA21F5C
+:10FEB000CFBF615CB37FDCA90D07693E470CCC6303
+:10FEC000063EBAB4E73E3BFADB2BE3CD14C793FB07
+:10FED000B24755F7E36484F4AD1508DAFD0D115609
+:10FEE0008C7FFC43F05D46827B1FD2C7BD7C7C05C6
+:10FEF000DAC19665A674C4A37B79921A0770BAD743
+:10FF00002A34EFD1CB938C787E61E68AC1E3504FDF
+:10FF10000D61CE9518DF7928968594D3F3F17C9DF9
+:10FF2000585C6560C6689A8411E32F176B148ABF0A
+:10FF3000E0FE5B01D0678E985FF9AAF7A3883FECDB
+:10FF4000F06F181ECBE53F73AA4A491EC1CE6BE481
+:10FF5000A78CD51993A09F796B6039DB8DECFDF1EF
+:10FF60000EFE43C079EFF23A6D7D255BF3399D7F3C
+:10FF700061E0EF5BD02E68EB3F95F2E8600EA4AB3A
+:10FF80007BB1C58CE784460BBC14AD51ACA85F6651
+:10FF9000AE688CBF0FF2339B5407F2B4C40BEBE88E
+:10FFA000EFD3398FCB4D3D693D70D96EEF82EDDCDB
+:10FFB000515CFF2B7AF7702C7F28D63D1CD7F1AD12
+:10FFC0009F58189E9B39D606FE18C61ECD6C10C5CC
+:10FFD0001FAC6CD0A4003B5A64B02660BCDFC316D3
+:10FFE0002632BEB7650E9C77A5790DF98195E80795
+:10FFF000F2F9911FF8502C67D5D6D7153A9FC3EA6E
+:020000021000EC
+:100000000DE4079A851F78D65E9B00AE17733D6E90
+:1000100020392DDE16437E68F18A5C23F26FF1AE43
+:1000200018D243E0077ED863989F8EC756641E4857
+:10003000847E8BEB321CAA967E5AFFB8E698A45BAE
+:1000400047BF4F4BB793A1E806F4D294A72408FF0B
+:100050004ED08B3D164B7E47E182B77A9A019ECBFC
+:10006000556174EEA833FF83A5C6D1BE9E5C17E62A
+:1000700025B7AFDF68DFFCCA9AA144B7607AE5FD17
+:1000800067E670B427ECAF16867AECA1EEECE1C916
+:1000900050FEB0C2E5EBA1EAF17928A759095C6FDF
+:1000A000BEB714666864ECFDA566E6ECC5D8074BE0
+:1000B000AD94FF686922E53F5E6AA7F493A57D28A9
+:1000C0003D29E26852CE8001885F472570F91A9574
+:1000D00020E2DE6C5122AA8CBCFF7C305467C5A1A3
+:1000E000D2278C4D63EC1E272023C0DF997E6F043E
+:1000F00012B93DDF62B08E4B44FF719542FABED813
+:1001000075BBA63DF825463CFFCDFA64FACBE99CC9
+:1001100098DD3819F8F0FEFC584DFB6935299AFC3A
+:10012000E4043BCD7B525E774DF90385FD35F9A2A2
+:100130003640029E2F30DBF8FEAAD8B767CCC6D770
+:10014000EB56DEF66AD5F02EDF0778AF1E32507D13
+:10015000303D245D67ADD731378036733DCC0DFA25
+:100160003D593B93E4EAFC110BD9FD95DB32DF1DD1
+:1001700001F963DB0CB4BF7E6C45EC5ADC3F3EB644
+:100180002D3E8A41EA5EA9321FFAC17AAB9105E899
+:10019000B7DC15CBE8FC5691D7E440F92FDAEFF93C
+:1001A00095CCDBD11F4420513E3E54BD3E85E8E74F
+:1001B00024FCBE14E6DD02F933A0AFF1C8F8CC167A
+:1001C0000ED71985ADC0FCD9B0BFF5FA3EC071B1EC
+:1001D000A0B64487EB01F5503CE9CB1D2A43BE2D68
+:1001E0005C60A0FDBBB91FA91B31CF9421299CDE07
+:1001F0002A9D47642F99A87FD60A1C02ED16FDD6CA
+:10020000B489D6774CE4770FF4AE16FC897C74265B
+:10021000863963085885E03DF77EFC46ACF7E3D3AA
+:100220003B08E7FDA5DEB53201F8EB5C897710E904
+:10023000B5C7E249AE82F17ED2C8F59607E540F136
+:10024000EB4BBF9C2D273E9D69702438485F652588
+:10025000A1BE3AB9C640E79899DE193589D63F3B29
+:10026000888FE53827F5F67108DFC99A0C86FB966A
+:10027000C56B54F20790FF787B2FE7FFA755371B1C
+:100280000EFDD6286ED6A523DF3CB260389D639A5A
+:1002900021D641C17AE0339055772F7F7EDE1E7ED6
+:1002A000CE8665B5E8EF1D18388F157CBC44DEBFDF
+:1002B0003C0750D6ED4F47D1E5BEDCD43D1AEDF0FA
+:1002C000D90F55E2B3B3DD6A8725023D2FE8F60E5C
+:1002D000FB3EE4CF17784EE921FF54B87B6702AEAE
+:1002E00057746BD2956E783EF6C4DADBE1BB73AF20
+:1002F000181C24E64BE2497FCC7B696ED7C0F38E95
+:100300001DF5972F99EFBF389314C0E77C7BDD383C
+:10031000EB005C77BB841DE2F8B1E3E62AE0C5BAE6
+:100320004EC143C3ECC450CB6A3C773D13C4243068
+:100330004E7842EC8F1F107A45FA09115D787EA63F
+:100340008EF3377B5521BF0D7E34FABF529C4F94FC
+:100350007A5FEAEB32564BFBC14712F839C6B98ACD
+:1003600097DA55E0CE2EA8A8122B0F42976D35795B
+:10037000BD19D49735D00F48EE62E7FB43C6579EB0
+:1003800045B62D65CD7C7E41EDCE19BC25CD191D20
+:10039000ED4D8975E30A1BF56F7060FCA454C869C4
+:1003A00079ADE2F5F17990DD94F18AD9C26E06DB80
+:1003B000A70EF628C80ECD0EB2B3AC566B5701DEB1
+:1003C000481C47C21B0CA72BC24278980770A1BDDE
+:1003D0002D717B0F4C24B8150750B2033CA5CC35CA
+:1003E0002606E701F53E7B47F882E7D5015E31CF6F
+:1003F00060B84B1C9FFB70FF18CF8751BC29681E4B
+:10040000921EC1FE9AA44B8987E3B7A441217A7E4C
+:10041000DAEE07328A1B497E8105509DF67BD74470
+:10042000D467A5EB40FF66F8F947F2D33C56178531
+:10043000FC52C17C2B9350BE7C75D346A2DFBEE13B
+:100440007D23CA49A1CDD7531783285CFBD3BCB405
+:1004500080F544109E6F44D76F8A379C955EC6BD69
+:10046000004FB337ABCEB0419A76E21C9187E4607F
+:100470008EC763C4F8C61CB1EEBF119C957A7E6E20
+:10048000FC86F076E2277D5BB8F3BA68FD62BF9F19
+:10049000D5333A949E6AF7AF82ECFADF0C3C7E21AA
+:1004A000F5F155BD93E225502EFCAE2A2B8F9B070C
+:1004B000E9F1B42CD2E325C2AECB714EADDF49F1E8
+:1004C000B7D968F703CA3F5DB793E2FEC6576647E0
+:1004D000A1FF7D6AFDCCB578BEEBD4B69964E74B3D
+:1004E0009F9376DE6D0CF41F72D717BDF863E4DFBF
+:1004F000AD61149F2FD9EF16EB1ED0ABD0CEBE9EB0
+:10050000EB51B68EEBD552B48703C81EF6C6768B78
+:100510004BDCBD510E02CAC94E2E9EE9FEDD1EE81F
+:1005200077F1CB110E0FA1C2EAD391DF6EF5A13D99
+:100530002C5FF8F1513CE70EF6FFA31F48FB0FD9E3
+:100540008D7AF7922E286FC2EE97AB1BD3ADE827BA
+:10055000083BF15FC0BF3934FE8710FE8B11FF01ED
+:10056000FB20C76B389E6706E1FFC41A4E9795DBE8
+:10057000BA47E1FAF1784D77F2B38E6FEB49F89F05
+:10058000B51AF0CFE35F5A3FAB06F08FEB08C43FDC
+:10059000C05BBCDF2EF0EFE0F8AFE178676B783A34
+:1005A000AB039E3D748E61F1AF4D0EF41BCE84F90A
+:1005B000C89F3AB35D65D5017E98F483BE60B5BF30
+:1005C000427F4DE27F6EAFE641A87F0A9FFE531443
+:1005D000D261EE761EA4EF807FE6EC82FEB87FFC4F
+:1005E00076BFE9952EF1017ED34DD2A982B918D9F3
+:1005F000C5863F1DC17583E2844F6D788F46DCD779
+:10060000A8D7DED7C0331985368C2F38CC6684271F
+:1006100035F81E8A9B611CF99F3D3F9FB190E4BC59
+:100620005573BE6D22F319BAA0FF58A7D0FDC6F2CC
+:10063000453951390CE3D45504C7E92E8AE6FC78D4
+:10064000B9AA23FFB1CCC8FD48B93FF9AEF00FDE1F
+:10065000EDC2D725EF75B1D27797C218D9814B1665
+:10066000A317EF23C07A2A11C7F7EC3111DD8E22D0
+:100670004C807FD528E2366002914F1F649C4F1F4B
+:100680008C6CA23839AC545E40BBF8D0129383FC1A
+:10069000DAB8688AD73E20F4DD83912B5D681F1E8F
+:1006A0008A343A31857E3D7888CE301A8687F10DBE
+:1006B000C946BAAF53686E790597BE0F279E78D4A6
+:1006C0000CA0DE06EE37C655E0D75DD7633BD2C53A
+:1006D0004F1F6D9CA7323C74DCA355E04B713A2947
+:1006E0009E6382BEC3018E2B682FB1DC6EE5F19D47
+:1006F0000D40278B9FBEC1E5CCC3F703CAF05CE376
+:1007000028C6196404E15F932F33F2FAF0C4AF26D0
+:10071000ACCB66ECCFCC3E10E956863A04D7F74511
+:10072000D15E8C97DF83F1251BA67AE297C97AE622
+:10073000D1F1B42612CFCC8978D34481CFA92398A4
+:100740002F1AF0EE3BA88D77DDE7D3F97A037EEF21
+:10075000D1FB1A913F7566BBC10AE3B8F29421B888
+:100760002E295B7E73F0A6259AF3D7A5425EC7CFEC
+:1007700085B5FE80C7211E046145BCCDD0B3FDEA1E
+:1007800010CE0788974A9BDD43ED1628140F95710C
+:100790003649FFC1D07D201D1F14F0413F3551F86F
+:1007A000BD3134BDFA26CAF5731DADABE70BB99B5D
+:1007B0002FE56D9B56DEC627DAA9BD827E30E0EDBF
+:1007C0004191762617E344FFE312B95C64DDE278D9
+:1007D0002CB2359DCEB708792937F1FEE5F8F788B8
+:1007E000744CA28DFA95F000BF1EC77E74A00190D4
+:1007F0005F4FD656937F348705C4B533FCED245F35
+:1008000077CCB7EB11DD754C8DADB310F5CAF7C2DF
+:100810001CA8471F34D6F5AC8AECD84EEEDB14B2D8
+:100820006603233D29E261C2FE8C5523E97C40A189
+:10083000C2EF0F5ECAB17874D118A73110690B638B
+:10084000143A3FF137B17FF250F4E28928D785514D
+:10085000463DA633582BF5FB776BB7E8FB18DE3324
+:100860005631760E038FC877C2B8D5A877787E8DBB
+:10087000339BA24A227FC72127E0E1DE6B407FCA7B
+:100880007F2FDF09FD5F7A4BD4B33BE9FB4B8F0B26
+:100890003EF6E4F2FCCF657D1ECFAF92F5F93CFF4A
+:1008A000A4EC5FE49F0EAA5F1654FF4B9E5FBC3E14
+:1008B0003FDF837EEB68CED285A314D2537B84BE08
+:1008C000285CEE23FC16EAF6F27434F3E9B26EDC2F
+:1008D0006E53A26B0FDA1FD572D282F6F7D564275A
+:1008E000E59F4F702F4BC475D424C563447DFBA195
+:1008F00097ECC1C44ECE1FEDE9C2E3F89B92A0BFB6
+:10090000A17EFB05FDAC4E8CBFF57E1C491CAE8064
+:100910007E9EF926F0FCA7233C1BBE493FB392B54F
+:10092000FD487F484975BE86F36327E334E745E613
+:10093000FFC4118DF12786E74500F5F397D7A5672A
+:1009400042FFF35F7D3DBD04FD2561E72BDA74CCEA
+:1009500089F734DB18A5E71B3F31E27DB38A5D8D53
+:10096000C671D0AE12D2DC00B8CA049C60E7F49322
+:1009700003EC7383D01B8C3DCDF7375F3DAB477ADB
+:10098000CED7D59D7A0EEDF62825E43ECD66F1DD75
+:10099000D14ECE17EF157AE86A9AB311E7F96B8C4E
+:1009A00021403EB7BA93FB60491C5F85C2EECD1C67
+:1009B0006631DB01CF433FE4FB54251B3286603CAC
+:1009C000F8CD84D1EF247E6D3CB595C7531B783CA0
+:1009D000B5D0D6BC089437332695AD31DFC1D88465
+:1009E0005F48390391856FF34C325F9D3F269BC76B
+:1009F000BB307F76FD636B506E9AC2B91FFBD0F09F
+:100A000081E1A8175A3222745690E737E38B8C495C
+:100A100043B1FC8E71589E63B2F42A22FC32E28B01
+:100A200037E35DC7905FB03DC641DC465FFC7D307B
+:100A30000FF7DB2A9DA7750F8A7087DA77FA87C0D0
+:100A4000AB31C94A69139019FD1709871C1FFCF9BE
+:100A500045CDD0DFC9E5498357DB719F25C7903469
+:100A6000D43F7E4682FB72E0F82775AC172E296EC4
+:100A7000168E4B020E03EE5D03BE5DD92A7306ACE3
+:100A8000F3268F89D0E4EFCD8F65CEC038EDBD2938
+:100A90009AFCF4C2EE9AF60FCCEAAFA92F30356774
+:100AA0005505F8B19DFB491E82A7D26209477FEE2A
+:100AB000EF0D5FFCE541F4FF36AB0EF455E7EED9E0
+:100AC000F297DBA1D5653C4E45F1473BC5CBCEC97E
+:100AD000F3287AA73E705FE8226BA6F33E9DED03F4
+:100AE000C975EE7CEB7E3A77F65DEF03F54A12EBC3
+:100AF000DD216C08DAC3CB551F51BCAE2292CFEF7B
+:100B0000E2EBC78CB80F8AFB8AD781DFEFC20FD127
+:100B10003F6CF3503C3BB7FE18ED9B1D48E47ABA9E
+:100B20002275811EEF1D55428A76681CE8AB68E08D
+:100B300097E646367017EEBB6658B81FDE3699B199
+:100B400058E42B1EDF694A88A17BD7F36BF2A8BC5F
+:100B5000A22D9CFA7F4F6D1E47E7095F5368FFA1E6
+:100B600020E5A1E5787EB829DC33E01118B7E077FD
+:100B700077E521DE2A76F1F3B505EA9FB316405AF0
+:100B8000569B47DF17A8AC49017F61422EB7BF05CE
+:100B900068F321AF0EB3AC46BBAB1A7DBD9E473D9B
+:100BA00063B4909E896E7B80C6AF6C33D3F7F72415
+:100BB000717FD7D0C2E11ADBE6A272C90F5393BA94
+:100BC00069D60F86F8CD7A7C97C3D0C2A8FDDD6DBB
+:100BD000FD2895F37DBBCFAFE93EAE21FEEAB81408
+:100BE00098F7DB718A95DC90203D7CA56A78340B00
+:100BF000A1A7DAC769E3E7F44C6DFCDC5E618A7398
+:100C00007E12C031F1B1163DEE07B148B315F13592
+:100C100071C4607B49807CA97BEF37227D0CEBDEC1
+:100C200037A29D36419A1B505F2ECE3304EBE90567
+:100C300049524F2FA354DA1D767506F9A933AC82B9
+:100C40000185FCCC10FA547EDF4C6B1AA0E36E1EBB
+:100C5000C77F34C5BD02F545730E9BBE83F4667332
+:100C60003AEEC37C57F0039DCD0AF9892D741E75A9
+:100C7000E208BB0EE3FFAB045C528E6F348FC5A25B
+:100C8000FD7B2A5B82FDBE77E79DCD4EE8AFF14745
+:100C90009999680FE4B8CF25F17B29CCDA7A0DD782
+:100CA00083956F44D851DE0B703186FB9D7B4CB42D
+:100CB0004E8172DACFA87CC3B409EF895446C17A59
+:100CC00015C6CF7D33CC877CDCF866981EED46EFE9
+:100CD00074F77348CFDC377B8FC1F5A1B3C1A4672C
+:100CE000E4F7389F273DDB09BC37D25BC17C26E5A2
+:100CF000D35DC3E5A548F069B1903FB790A32B55EC
+:100D00005D480EAF3C0640E33EE963CAC05DE8279C
+:100D1000D82DF47E9394CB025C0F417941FF183AB1
+:100D2000FF2BFD8D60392C6BB352BFE56D7621EF43
+:100D300036CA4BB92B167263127EC62CC1E7BB5361
+:100D4000DCEF205E0AAA41EEA3681F3F0BE5C9CF86
+:100D500037462BF217F04D624980FC5437DECFD076
+:100D60003F31C5B9886F66411AE89FCC6EF74FAC2A
+:100D7000E31200FE892B327478DFA99D7FDBF9E650
+:100D8000E6F87F8F9097E2485F4FF4670D55610E4C
+:100D90003C877E398EEFF72C5CC5F1B8D0E0CA45B0
+:100DA000FF62E12F158A97A1DF817A69D8912A63C2
+:100DB000601CE5FEB641CC0E7898D2D683D23713AC
+:100DC000DC47110F456DD304BE067DA3FDC5A14EC2
+:100DD0001E4732784D8E8D19184772AB48E733693C
+:100DE000CCFA4CE07EDE7A1DC5C3E4BEA38C2B9901
+:100DF000F0BC7C801DFD425F9B4EEF3704C79972AB
+:100E0000B8DDBFB0D94076BFACF1CFC374507F2EF0
+:100E1000C3D905EDC9977A771BF2F5BCC9DE570D2A
+:100E2000909FFFE4CEA891763F3EEBF4BE9E6847CC
+:100E3000EB008F18EFAA5BA3E679B9BF13C1F7C91E
+:100E4000387F4B7E0EE6F3796DDD889FAE5499C8EE
+:100E50000E5D01BE65017648DA1DA9E7A5FD917C0E
+:100E60005DAEE7FAAB3C32DAEBC908B43B935C39D0
+:100E7000C8777DF8791ABFDDD9B47614CAC1A53810
+:100E80003AB728ED46B01CBCB6141CD35E1DED8EDF
+:100E9000D4EB52CF4BBB35FAE52F77FE15CD558AF3
+:100EA0007B4032E0EB6E3DB75F77EB2DC43F63E3F1
+:100EB00026E9916F6E5E8F1E137AF498468F5674F2
+:100EC00062070627DF9A1C7415EDF34CDC7F443D66
+:100ED0001FD8DFA329A3C7E03CC627733BFB5DC136
+:100EE000DD99FE1F9F7C6BFA7F58B288F7DD40FFCB
+:100EF000172673FD1FACEF9995BFA773694F5F2F3E
+:100F0000DA83A30CEC03DAC18608FB16610FC85E16
+:100F100084477BBFCE1E5C4D9B5988780A610F1EAB
+:100F20004AFE16F640F2A1941B2927522E82E5486C
+:100F3000CAC5849FC23A11E9F41EBF5750AEF76C80
+:100F4000A3FD467BC46094CF763F6E9742F2D6C134
+:100F50004E08F9F1CB8BD66E48B990F222E5A75C2A
+:100F6000C8C5EC20B9D8A7D63D330AF7CB92DD6BC4
+:100F700093E3FD7252B623D83E74CA57185964B32E
+:100F8000E3AA18F25539A4817C65EA441E9E49BE45
+:100F900035BF68D94DF2D36FFEFBFCF49B4EF8E9E8
+:100FA0007FBE0D3F75F4633FCEB2033C57B240DFC6
+:100FB00066F8F96DC23B8CFB0FDDF97A00D6970419
+:100FC0007793318DE23E13AEB32A8A2F0ABE947412
+:100FD00096FEC06C11773893E27A07E1C5F5C082BE
+:100FE0009BD37B4467535CB311D727B3210DF40324
+:100FF0003AF37F9B6F51EFBD7193743E96FC9DFB5E
+:101000008DC79243FB8DC7B1FC9BD2B5209789F861
+:10101000DE8F0B30DE38E1299167CB0A108FD34683
+:10102000C8FA9F3CE9EC81FA81C9B838C539DE536A
+:1010300045DEB3F4F018683FE119E68F9B43FDD815
+:10104000ECE8F6B888C2FCED95E71F3BBC86E8519A
+:10105000CBE5CCDDA2E7FB3F229F05794B407E44E8
+:10106000507E036F1FA56F6181E745909F94219C7F
+:10107000CEAE00FF0186DF7F05ED85556118D7A84C
+:101080008CDBF8D615D46BF50AED45B5E381D514A4
+:101090003853C5FBB9945F73D8093EC203BB78BE11
+:1010A0004F4AED931EBDE837E0DCBDA14E71D2B9C9
+:1010B00083118AB75B46477CF749D1DA27FCD16BAD
+:1010C000BF67781EEF56BE6FBFCFD68DBEF7996E45
+:1010D00061FCFBB2439F7FFE5E0AE7EF3159D121ED
+:1010E000EBC7A5A8BC1F1137A0F1A1684A5DE87B3A
+:1010F000B013C5B8CDB85F42F8DCF624E2B7D92802
+:10110000F1FDF293C8776319D3C4CF607CCADF9F27
+:10111000F272418D9E4FD71984AFAF9BEF8014A917
+:10112000BFFDF8F204D1CBF435F87684C0B75DFB8F
+:10113000BDEFEBE835ACC3F7826FE7483E766AF85F
+:101140003D5AEF22FE8C8E53ACE84757B8C2D6E02A
+:101150007AC12F9FBF27BE6C96FB031DE4EFB5023B
+:1011600094BF0A8947CFEB4FA2FCBA74EDEDB93CAE
+:10117000B6F33573F601BC52C80FBE7FE4F9FA2707
+:10118000312E097C41F594D707C01D2C8F7541F98C
+:10119000EC20F915F247FA03ED01E0A927EAB7B808
+:1011A00063467B009FFC4CD0E9A2B827DA3C9AFB4F
+:1011B00093CDDD78BA2385FB8FCF097C6E12ED9B32
+:1011C000C303F090AAE11F1FAE5B02E64D78BA3F61
+:1011D0004ECEFB93827CD063CD365EBF2DE5A32738
+:1011E0003DD9FE7C707FAFA67C528078F1F7FFF18D
+:1011F00061F423EE1778DB9172E4B02752D039C145
+:10120000FF4E21F007BD63518EFCA174E48F1F7661
+:10121000E44F4FD0F7F44E7767DF7B3A7EEF0CFA5E
+:101220009EE13DEA9BFF5ED02D3F88AE7941741D63
+:1012300013942F9479AF46FF4ABD5C5CFFF4E30939
+:101240007118DF54E838BF9F9F4F93BD996F95FC8D
+:101250007BE630F2AB9F9FCF129E27D709BA79CE9B
+:101260003D897A7812EAE151FEFC14D443943F5F41
+:1012700080FB617E7B7581EAEFAB91ED2F92FD7A69
+:101280006085ECEF33CA4B3A32CF25B277F70BBD0E
+:10129000C33CADA4F7E735F0EF3F7DFEF3C35F2B12
+:1012A0000FB54178D91094F704B55F7703FBB622E8
+:1012B000E8FBC782EAD704E5D707E56BB4DF17CDB3
+:1012C00052480E8B46F0FDC960B90CE68F2F52DAFA
+:1012D000E363EDF65C8924FF4E235713AA79FEFAE7
+:1012E000F3FF29A8890CC8A7B0891EB2EF305AC0F5
+:1012F000FD41D0B91E15F8C1D089DEBCD899DEEC0D
+:10130000136CEF79FD3FF0D724DA2FD2F825FB5488
+:101310006DBE51957047BDBB2832605F955926E27E
+:10132000BABAF3FD9B8889635203FC224FF84467E5
+:10133000C03C65FB715F5D5771BCF8D4F0899B714F
+:101340007F68B4D8D7B4F114ECA58AF6BA52C46F4A
+:10135000C6E1395D6C17EEEBB930D00F6275BD7028
+:101360009E8D3F52F9BB50D5401FC05311B3D37966
+:10137000D39978EABE3BD447472FF90D7CB7EF47A6
+:10138000EA12B4D34797C4D239A645A9DCEFDC17DB
+:10139000DD356136E41B231E267DDBF8C4584AF791
+:1013A000AACE95AD56E83A357962645FAC8F263C9B
+:1013B0003936C44F5C06FC9D996A2738DC366B428F
+:1013C0003DFADBAB0DB45F082D7E45FCF3A469301C
+:1013D000AEB78B96F5A7FDB0E29F4F1A87F7B08A9C
+:1013E0001F37D03E498BCE4A7122F7EAB1742E6A7C
+:1013F000D60A917AEEA2F4CDFFFCBA1AEF69B5BE17
+:10140000A0D0FB0E775CAD7B67109E9BACE94EF7DE
+:101410002EDE8075009EFB3EBEBEB717CF219F0813
+:10142000ABA273A4D09EEE8B955EB3BF3B310BDBBA
+:10143000ABD6E5D0FE1494A3FF7C6A95BA09EF41C0
+:10144000154559C2F1FCF6A9AF18C5754E3D6EA2FF
+:1014500077228E47BA67AC8FA3FBB8E8E9B3538A0B
+:101460003D4A013C4CDAD067626212969B047DFBD8
+:101470004415011E8A74EDFC43F6A42486E727A5D3
+:10148000F699B805E671EA97BDE97CD8C154E7E45E
+:1014900054C0D72FD29C5352E3115E6EB7DEFC0FBF
+:1014A000DF8FFCE385E204E4AF8752395FBFD1569A
+:1014B0009C10F8BE77C9453DF1C19B46FB227A27B7
+:1014C000303C4DC17536F0412CC6CD6789750BF0A7
+:1014D000F3929D21FCABE1A92AD1ABF1A7F1D94848
+:1014E0005F3F5F0F7F17F519AD37205FB121732D77
+:1014F000DAB993A625EC440FD67EFE91ED0B233C82
+:1015000019B68579C332307EEA1C87FCCD12EB7A9E
+:101510004DB604C8A168FF770F3FE7FB77688FEBF4
+:10152000BEBF7BFED712B89F21DB9746593CE85CD3
+:101530009CB658F4488FA3FAA5A7F03C5AC90B06ED
+:10154000B203252FC43FD68AFA07F806E36BC1F32E
+:10155000FA63AA81C7313A934BCF18AD5CB231130D
+:1015600071BE9DC965CD86DC899B233B97CB522BF1
+:10157000D74FE35EE0EF51960EB5E8717F73F40B41
+:101580006F6DA17B740BC286E0BD89D2174C44AF4E
+:10159000168BC563BD0DEF1358F431903E9BCAED19
+:1015A00069BD909F5C95E9CD4328A57B1272DFF061
+:1015B000EC92679EC5E397E79877DA70C0DF6527FE
+:1015C000E7D3CBBB548A3F06EF23961FDC69CC617F
+:1015D00037B18F7883FDC332D622DEDF0DFD7DF07B
+:1015E000FEE1ABA9C1FB8706BA4F5E2AF60F73373F
+:1015F000280477E9127ECF3F3796C78D4F2E05FA24
+:101600001B69DE1EEB103C0FCDED4E2953BC66F876
+:10161000F5AE0D0B288ED913F184716EF16EE2894F
+:1016200030473AAEF34B5E0823FC96FE6AEE5F7ECF
+:101630009985F7FA0AE202D7D5FB912F387E19DE99
+:101640001F94FD9C5EF6637AA731F745581FC37C53
+:101650004A63D8ABF76720BD92D2719F53B62B5D1A
+:10166000FEA35EBC1DACAF611D5DB44AE5EFC7ECE7
+:1016700036911D04594F6401F72C67AD38683472F8
+:101680003BC6128709FFDAEEBF9F761CEAF1EA6ECD
+:10169000A5B88726F127EF5115E9F8FB74853A853F
+:1016A000EE578126A37B499753B95F7B3A959F6795
+:1016B000284A77D0FD9CF2B526C7F20CDE4FFB7DA1
+:1016C0004F58DF95EB9A4B683FF3F7268AAB54AE41
+:1016D00008738645F1F3173B06D0F96ABD11F05146
+:1016E00066E7FAE2B2986FA57DD25D749F41CF8E16
+:1016F000E8A1BEDCC2F563790CE03D92338A6E1836
+:10170000BE67C7E8DC24F69B3428607C4594433FE1
+:10171000F6287FBF4D3A5683711B6CDF7710E2319C
+:1017200076DA7484EF1595E41990B47604FA7DAFF7
+:10173000A899B8DE2E5AB56F1CEADFF9DB07E38DF6
+:101740000956F4EA07643FE60BFAB7887367C59059
+:10175000C777B622D2B83CB9551E2F8A485334EF0A
+:1017600010C9FAF255061EBF073D8F8AA57CD9C75E
+:10177000D46FB9A53901F56FF96EC330D4D351696F
+:101780005C2E8B97A5651F01BE2A3644D3BB8365AB
+:101790009E0223E6CB6A15CAFBBF8B4F473E3DBF77
+:1017A000E2B528E49F1361BE9E68975A178439E812
+:1017B000DEA195C7EBCEAFE849F79566599B2DF8AA
+:1017C0009EC1AC45DD6DA8BF8F5A7D46AC3F5A9790
+:1017D000A1C3BCD36ACDC6BC537F1BE5CF8BF32D11
+:1017E000F4837CA5703A976DDB67C4BF4F3244CC5D
+:1017F000F7E22B1FF4C2F84F797A732FB42BC0078E
+:10180000BD5210CF2F2964972BB6F1F3EE920F2A19
+:10181000900F40EEE6093EA8D8F5DAF7511E2A905F
+:10182000FE433AF211F0F37E2ADFB1711CE3DFEFE1
+:10183000473E91760CF22B0C368CDFF17C661AA7B2
+:101840003F948FE1E59E01FC1C5DFB39048D1C7407
+:10185000465F571AB787C5CB4CA46F5D695C1E5AAB
+:1018600056ED8E42FA5D7C65DF01DC6729DF0156AB
+:10187000DA1E421E043E2A71FE51043FF9179538C4
+:10188000DF28FFFCDBF95EC86125E3F393F3ADD4F9
+:101890008BF9CB7AF1FD24C12F654CE06B576F2E8D
+:1018A0007742CE508EE9BD0E313FB74DFB0EE5F7C6
+:1018B000C5FCDC2265D6BA28C40FD217F50F3E103E
+:1018C0006994FA049A5CDCBE91CEF14B7A49F857E0
+:1018D000093840DF39636C7E3AB674F24E6495E0A5
+:1018E0009B638F7749AF07FC9DDF4ACF6C11BFEA3E
+:1018F00003C6937C23C7CB7D79D2DD386FE8DF87C1
+:10190000FDCB718F7A22F4D8CF51C6E543C22FE5C3
+:1019100032B7FAA1BB074761BB8B96EE0370DE9C22
+:101920008EABD2ACF4BD13FD05F8DE59AF50DCFA36
+:101930009858E71F7BFCB5A8E2017E7E7F427C279A
+:10194000F90C7F303E26E16DB2F1387030DC520F79
+:1019500049B8739FB8EF6E2C97F0E3BE51209F4AB1
+:101960003C4A7E95F7F582F996784EDA4FB573FECC
+:10197000AE4C3D46E7773A9407F727FCA213E25CAA
+:10198000796B3CE371FF1589FB35F78A188B0CB432
+:101990003FD28EC0CF1A7D80FD69BFA716E73C8B72
+:1019A00074BB90D68DFA3FC7EA8C39D06FD999E6CF
+:1019B00071F8CE9DF443EFB8EA53A3315EB58B9F27
+:1019C0007793FC5276613FC941B9B8FF54B4EA83BA
+:1019D00082E1C8EFBF35D0BE4ED1E3638DE8DFCFE3
+:1019E000DD327318A201EF41A05E3FBB796826BFCC
+:1019F00059604D9886F721363F33ED01289F55AF4A
+:101A0000D2BB0DD80FCA6FD1A399145F3D11D65226
+:101A1000300AFDF81FA856F4E36FDF32F4316C7F13
+:101A2000BBA56B0C3DB6B13996F24E7D34D907E9B2
+:101A3000F7CA7380D5E2DEC75F84DE3FDC9E2AE210
+:101A4000FC5F752FDC8F6FDD1846EFAC141AED7557
+:101A50003E1C6F4F175A67541AF1EA23DD5B25BF0E
+:101A60006C8E9199938650B93909CA0F1A9A1F45FD
+:101A70003B72F051CB607C3F92A9D78615737F9A59
+:101A8000EF3BC66ADF2D91707C24C60FEE4F7EDFE0
+:101A900084EB081BDD4FA4EFCFAEF8ED34B48367C1
+:101AA000B7F6B4E1BC4FEF09A3FB03A70DDA77CF7C
+:101AB0006EF5DE57F07D29796FF5749AD68F93FC19
+:101AC0007EC37B377FD39E83BCD1B9A50B4B19DD79
+:101AD000FB7E398DD1F76322BEDA89E7084B6A4D68
+:101AE00056BC077312F91EF7B376ABFCFEA599CB73
+:101AF000C1C9DD9974BFB7E46F3C5F52A778F13E6E
+:101B0000F2FEA79FA0F30AB3C1CFC4AB09EDFEF369
+:101B1000BAA7A7A1385C76B857E27DFECB5BF9F98E
+:101B20008A0EEF321CDC7920C9DEB9DFFC5DFBCB0D
+:101B3000320E119FAEBDCF2FF12CD74F6F023F8CCD
+:101B400018E2C7DB674BE790BF7C61A99BD24BCA09
+:101B5000B1B5B7231F5BA2E9BEC01FEB9F51F1BD1A
+:101B6000A8F25D83AFE13A78546434BD93F2D9D2E0
+:101B700025B48F7A616915A592DE320E77C7AE461D
+:101B8000FAEEB3FACC06BC9FFB4664B4B003B69041
+:101B900074EDECDEB19CD7B91F70FA4AB8CF6D9DD9
+:101BA0001985F36A7C3EB66124D23522DA8A7E5FDB
+:101BB000A93847726A3DF7ABCF98A37F930FF43DE6
+:101BC000B3614A02BE3737BBF1DE69585EB247B136
+:101BD000E27AC0B1675214AEDB3ED5B744E1FDA84E
+:101BE0004FD7CB7B555EFA3B54A3F2D8146C3FCA57
+:101BF000A767F60CBE758D7C32F2829EEEBF9E8783
+:101C0000728A935C0BA73809FCC4E2B991D9AFF38F
+:101C1000F84AFB3A57ACF36E17F37E34DD26F73102
+:101C2000A83C77042F3FBD61E744ECEFEC668315D9
+:101C3000E1FE6CB381FA9F07EB331DC07B662B5F1F
+:101C4000F7601ED7CB67B7F2F5CDBC3ABEBE295FB1
+:101C50006070F2FBA25A7ECC0D6847EFFB74F25E17
+:101C6000C83C279FDF3CB09738DF60BE8D6175743C
+:101C70008FEC9B9E170DE6DBF9925F857E68E7D7B8
+:101C8000CEF844E013E51DF955F2C3BCF57CDFDE68
+:101C900056373807F94EF247F03B59D546C6DF575D
+:101CA000D485D37BB89322ED06B40F53E25AC620F5
+:101CB0005A3E4EE77E809AAB73E2BD37566D0AF905
+:101CC000CECE8A74EE57457465C4EFDE742B3FCFD9
+:101CD00029EE7FC914269286767B5284ED0B3B3425
+:101CE000793AFDAE7BF4C0CF936EB73DDADDC1D853
+:101CF0002FD30BEED1C37C2665DA767783FCF3BF56
+:101D00009AC0F3B7D9861A20BF4C9978CF18C8D794
+:101D1000A73B9F4A0F18E7EC962E69383F28FF191A
+:101D200096D7C5BB7F8E69A5B80F7649691DB424C7
+:101D3000C3DFFEFD3D96A37FB4FBF32D0696EE18A0
+:101D40008079097FE8B425DDF9ABF4F88EE5C58C20
+:101D50003D4EE7F53CFC1E0EFCB8CC09784F8AF3EB
+:101D60005BB1BC975313742FC7C1EF9FC9FB52F2ED
+:101D70003E545FFF7DB20DB7729FEC9281FF1D2A2A
+:101D8000C5A9BD0FA634FC89DEF9A9F6B09630A22C
+:101D900083F69E4D39BE53771BDD0BA2FB874C6F3C
+:101DA000277D3357FA3B68AC87F9DF296089FCFC53
+:101DB000C1A3821F4F2F653D7A80E89F7FB739CA44
+:101DC0000E705C98E8EB85FA2032DCFD27C4D7E979
+:101DD0000DD5A90BE3F01EAAC9910FEDCF78F97DBF
+:101DE000CE32E1B7B2CDF1422FA8BE3BA15D534642
+:101DF000DF4D6887DE177C7521C397FE23D42B192E
+:101E00007C9D04EDE83C5DDEF2BBE2B1DD85ED4F8B
+:101E1000F4980D709B0006BCA7351EFA1C61A3F751
+:101E2000AA984AFBCF5EFE7E929E79A26CF8EED510
+:101E300033E9E23E11DD13947492F8EF4017181A5B
+:101E4000FD599D991910EEBE6C03FDFD2F491FF938
+:101E5000CEE2C2DD3CFE427724451EE348A7CDE238
+:101E6000EF9F75B08B6F91BF0A62E9D1E89F0D3388
+:101E700043DBC9111B8DD8F5776D2FFF9D2EFC928A
+:101E8000C16C70E03B92A5A2CD58B5D08EEF5B2D12
+:101E90008C37D37B250B5FE84EFCC196FC9005B6D2
+:101EA000631B62895F5666A884FFB9F58CDE1D2A24
+:101EB000A84FA6F394F9F5364AA3DA12A9FCEC6F01
+:101EC000DEC9E27A89D3A7E07FBA8CA6734BFFD331
+:101ED0009B52D6D97BA79166BACFBBF020B76B0BCC
+:101EE000A7CABFC7C2EFAFBB0438AEC81A8A0BB9C6
+:101EF0003ADC53E7EF57BAF0BE007EE734507D6717
+:101F0000EF574AFC9A04DD82DFB39C7A303391DECE
+:101F10007F14EF594E17ED9AC5BDB3CEDEB5BC4F59
+:101F2000B47B226A5C13F2DD746769C8772DF59E75
+:101F30003007FACF86D4487A47E13E37F8979AF5CA
+:101F40004C8B1EF1302D9BBF733975BAB6DE90FDF8
+:101F500039E97343768777920CA88F4D2E6DFBEC91
+:101F6000AEC20EF5657DBFF65DD15423D94F3DBE9F
+:101F70003B0BF969E25D51F40FD1FFBFECB410FFE8
+:101F80009BC43BB8CD2C2B11F5C2ADBE27FBFFDBAC
+:101F9000FBB1C1EFC406BF03DB7FEB424D7E60DDCA
+:101FA0000F35ED6FAB5FAEA91FEC5BADA9CF6CFA3F
+:101FB00099263FB4F9394DFBE1473669EA47B6BC8B
+:101FC000A4A9BFFDCC0E4DFE8ED63F68DADFD9B690
+:101FD0005793CF61EF68DAE79A3FD0E4C75AFF57CB
+:101FE000D3FEAEC4139AFAF1F6F39AFA097DAE68FD
+:101FF000F2058E2F35ED3F37BA577745BF22EA0CF1
+:10200000F1AD3A4361F844F9E5A62966D4076BBA05
+:102010000A7D24F86FB9B0D3AC07A37BAC63D56C51
+:102020001FF15F3DFFBBA0C1764F7FDEE5C4F81F07
+:102030007B8DDF6B8B067F521F307E8CD3CC02FFF3
+:10204000EE5D6C9E55938F77256ADA77996ED7D4BB
+:1020500027B9FB68EA53E63834F9B4AA119AF65D59
+:10206000973835F90C4F9EA67DF71A9726DFB37681
+:10207000BAA67DEFF56E4D7D5FEF1C4D7DFFAD5532
+:102080009AFCC0BA259AF6B7D57B34F5837D359A8C
+:10209000FACCA65A4D7E68F37A4DFBE147BC9AFA1A
+:1020A000912D5B35F5B79FA9D3E4EF68ADD7B4BFE9
+:1020B000B3CDA7C9E7B0839AF6B9E6F735F9B1D63B
+:1020C0004F34EDEF4A3CA6A91F6F3FABA9977ECED8
+:1020D000843E9F6BCB85DF53E0F897E6FBF6F76E07
+:1020E0007728741FEA5CD76EF27DC5963015FD2403
+:1020F00017C5996C781011F515DE27B7F1F33985FE
+:1021000014AF8A237F884C941DCF0B81DF1085ABE1
+:10211000B68C0CF4AB23FCFE5BEAF5CC9BF7DFDA64
+:1021200084FFDCD5EEBE88F231AF6EFB387A9F9823
+:102130007956221CF2FDBF7783DE6D95E978F3199D
+:10214000A60FF0170F86D5A60EF99A38C178F305B9
+:1021500086EFC1B6F72BE222F8C7BD1706F4BF160B
+:10216000D617F8F7236B979AE96FC7FF6CA995F21A
+:10217000EB962652FEFF003A29BF47008000000080
+:102180001F8B08000000000000FFED7D0B78544518
+:102190009670DDEEDB8F249DD07975779EDC3C490F
+:1021A00048089DF0D8003E3A216040C0E635044919
+:1021B000A4C1A84143BA81F84F7475BB311002B273
+:1021C000B391D11095C1860164199D092EA3D1093F
+:1021D0009AF09AE03A4C601CC5D91937A0A3E28E58
+:1021E000101EE3CFEE8FC37FCEA97B93BE9D0E382A
+:1021F000FE3AFFF73FFAFBB4385575AB4E559D7369
+:10220000EA3CAA2AAD5E898922636DDE1C4A9FF3EF
+:10221000DA9998C9D8366F31C1DBBD0E82FDDE7206
+:102220004A777A9D94BFCB5B41F01EAF8BD2BDDE67
+:102230001A4AF7793D54FE92B781E09F7A7D94B6B1
+:102240007B9B29FF156F0BC107BC6D04BFEAF553DB
+:10225000DAE1DD4BE91BDE762AEFF47610FCA6B757
+:102260008BE02E6F0FC187BCBD041FF19E26F8982E
+:10227000B78FD21EEF6794BEEDEDA7F277BC57097A
+:10228000BE8EBFDB19FC2ACD9FE431263097E67A5B
+:102290001EC2CCC92632F600FE4B82FFE24688CC35
+:1022A000C2D8FD8CFF3ED7B09A76139477FEF23FEA
+:1022B0008502C674A58C8D1F0F6962F6CEC634C622
+:1022C00026B075E64F7218D34057D76307FB094E07
+:1022D000191319D6C3DF752DFEDFC7583CFCBF9418
+:1022E000E5784C836953091442FBBE55827F771A07
+:1022F00055D7203EAB8D1CBF695A1395573E2CF81D
+:102300000D02635522F3E98B18FB7D5854011BC164
+:10231000D8258F2E47C47221DC0E8304F88F3A44EF
+:102320000E7E5D2C8EB1A59D861D9BD206F1AA84E2
+:10233000EF35F0FD2B561A0CAB643D3AC403F21D89
+:10234000DA18C69EB7B8A64B90FF608AC6A787F674
+:1023500099C99FED8C64EC2D8B6B06E65FF2DC7700
+:102360000C1B7FC06CCFC67E661BBAE21741FFFD17
+:10237000C7B5F69DD2F0F3E16E29676CDC0DCADFBC
+:102380003C97EC023CCAFFA275E1FC9FD04556F891
+:10239000F3012F49E0784A1A553ADBEA5A82F87C71
+:1023A00019E9B9470353F8E56DABF6AC812155AE99
+:1023B000CA1AE182EFEE822563198CCD65928E41B7
+:1023C000F97CE6389A064D2D642E8217311FA56FD1
+:1023D000C5BBAAB19DC5CC4FB06BB22135D4B88274
+:1023E000F172CB78B9657C94F471ABAB8EE3E520E8
+:1023F000BC4E4CBA231BC7A5E0F59655A27A73587C
+:10240000FF76C4EFCB83173F113286D2C7774017D0
+:1024100026681EEB313DAC73A38ED1F78D8F087EFD
+:10242000A46B852E2A9991B7FB18E40B817402F4F2
+:102430005184FCD29F3A3792E8E449091A7C7092A1
+:10244000D6A71F0BE3D4F8B3052DD1875E00FC1E81
+:102450008803FA481F9E0EEA9A210DE01FA0AF677D
+:10246000B0BDF3AFFF5D0ECE97FBCD4912CE57A3A3
+:1024700006D601E8D8F7B6D6BE5B92991460ED9403
+:10248000317EA46B26DAED73C7E07AB1A54EA8DFE2
+:10249000AD650DFBF387F6FB2AAE17B47FC2A62B02
+:1024A000F753BB9CCF95F29FE2FAC563CAEBAD5ED2
+:1024B000F569AD16F03F71E89C5E1A13621C0D6F52
+:1024C000E76606E0EFEE3833DD6142E4FAF2E74515
+:1024D0000EE69F94E944A11FAD3ED2B5C314881700
+:1024E000EF17E8F9E74437D140CF1944CF9FF8E020
+:1024F000D3390669C42248FB606ABA2075BD60D62C
+:1025000023DD2C67764AAB9993D20760F9917E9DC3
+:10251000BEA7F438EF0FB276CAAF2BBED782F47CD9
+:10252000BFC6958A702DEBA57C37EB2FB3C1FC2D70
+:102530006C5E7BD40658CF6F796A5A02CCEF3CFFB1
+:10254000B2A398CEDD257CE293883F7A10AF3EC1DE
+:10255000B33E11FABFFBA592F549903F47CBD78513
+:10256000FD2B5F17457E048F1BF8A1978FCB41E3AE
+:10257000D24695ABF8A1F209E610A09DFE8306FFB6
+:10258000CEB400FE287EE8DF93508E89FDF7E07A16
+:10259000BBDF34C4E07A3F08E21BC72938186B80E0
+:1025A000FE90D62A63882A88DE1F62E176ACF7B9EE
+:1025B0004CDF9FA730A2EFCF05E66040BF1774A69F
+:1025C0006601E55AAACB5604F8AC60BE2606E56E55
+:1025D000CD4B05384F2325D7A744D71FB53715A6B0
+:1025E000A1FCF7A70A28FFF719EC8D69AAFD845D05
+:1025F0008F4021E361389F3FC076C70EC54B283E10
+:10260000F69F421463063DF3198B88BFD944E4EB6F
+:10261000443DF157234E6D06F6E3943CA6A1ED9F91
+:1026200090F1EDF94A4B74EF83F1EC1642F5C3F7E4
+:102630002B43F8603F243F2C8CFAD1A7713E56FA09
+:1026400063A6BE6427D0756A844B978682C116C77D
+:10265000E58B99CB979EB44F33717DE64CDEA8C8CD
+:10266000656A8FDDC6E5D1099DE443F844499A1DAA
+:1026700024D7809CBDABF897A7118FBB8CA62E2DBD
+:10268000A4EC16DD9FFA947D307D70FFBD4BD97FA1
+:102690006FE1FBEF1C99B5EF12BBBAF17BC6EC3AC8
+:1026A000C42F97FD5E998F6DB8DF2AF271C87E0B3B
+:1026B00003EBC5F913252B8374B5C0C7BF3A25DCDE
+:1026C0008F7CC436E7D2F8F4B2FC0CFEDE5AC15857
+:1026D000A651C613FE4B70195966CE209C54635602
+:1026E000C1291E9BAAFEC80649559EE6CB51956797
+:1026F00034DB5570564BB1AAFEA836870ACEF59743
+:10270000ABEAE7ED75AAE031ED15AAFA633B5CAAE6
+:10271000F2C2AE1A55F9B81E8F0A9ED0DBA0AAFFEE
+:1027200077A77DAAF2497DCDAAF2299FB5A8E05BE3
+:10273000FBDB54F56FBFEA579597B07F56954F3541
+:10274000EE57C1D3CCAFABEABF80FB16F0CF1DB6BE
+:102750006E55FE0CE9B8EABB3B734EAAE017E47570
+:10276000F62D0E27BE682DE7FBD16CFB07AA765825
+:10277000E768BEFE613C6F7BCF1F0B514E6ED7F4F6
+:10278000A721DD4A5A7322F27166F1DC4340662CC0
+:10279000DBB1AA14C55B4EF95387301DEDDC5F8AAF
+:1027A0006C925F71F210A605AE8BA5D01CB3D74416
+:1027B0001FC6B4C85338D58AA834CC3D8CE944DF51
+:1027C000AAA928575F785C3F1AF9282A46A14F0723
+:1027D000D1677D8286F8B97EB1C98FF2C732C52430
+:1027E000329013961F5AD6B1024C8B9A316DF61A5D
+:1027F000995F0FFA809751BAC96B66FE6C2067AF7C
+:102800008DE0FA93F795A7433B23AB4433AA99E6AF
+:10281000518F2548D0BEF5E5969C5D76C6D6EDB0C5
+:10282000CFD7E542FF199EC53BA2014E638E05300E
+:102830007F1698233699B1253BDF76FAF287C29747
+:10284000339D4D2417C4F65CD4FF947637967E6E84
+:10285000D79821DFF74BE71198F7ADF1E1F41DC2EE
+:1028600025995FA75D470BB60BF99EF6107CFC4CD3
+:102870001ADF7F97A4737D0A8784EB66E5CBC6AC2D
+:10288000A0A78C80B9DC3AA9E10CEAF0A2D927A074
+:102890007C62D7E07B902B89582983E0DBC3014E13
+:1028A0004058626C7F96EBC7D8AFD5C5D8D900FA2F
+:1028B00049A851C35B619ECF660EE2A35BAAF18972
+:1028C0003006DD8F9D763BF4B3AD0AC60BF0563D66
+:1028D000D737947AA3348CF6F72FD3F87ECEAECDCB
+:1028E000B7A39EF4A53C9EE7BCFD8B3ECE447BEB9C
+:1028F0002AA589351EC105F2CD5AE9B4FBA09EAECA
+:1029000011E62384DEF28B3491BED71D7E4490A065
+:10291000DEA76912C189957E1A77520DB41B80BF5C
+:102920004DF40966C8B73DE613103F9BD96967F0BF
+:102930001D335A88FED7C83C616BF8CBA28F410F7C
+:10294000D3799D76ACA7BB13E8331F27D46366B851
+:102950004EC9E347B010EBA3A4863E0D73DC409F45
+:102960008F4A7DD443FBC5DD26290BE8FB85C5A630
+:102970008A1D21DAFB549E9F0D31EAFE2D5A3E1F1F
+:102980008ADCBE6CE6EBA8F0F19A68A692E36B5283
+:10299000C65B6F84AFB5CDC85C01F86E857ECCD0C8
+:1029A000BEE1AB55661C3FE8D04EEA4FE4F264C787
+:1029B0008F72C86E0A5EC721F408943FA208E9A38B
+:1029C000CFDF087C68A8D2DB516FB2FE4393807BD7
+:1029D00073226B1150BE5853CA7A44DCD74457AEA9
+:1029E00033843E7933BA54D64FD99F83D74B773D42
+:1029F000E3FD129CEF7FD531D4C7561F8F8F710531
+:102A0000D0534C3AA7CB62D6A245FE98CCDA29BD6A
+:102A100085F5527A1BEBA7D4C1CC22A6A5CC4E6972
+:102A20001973523A9D79282D672D94CE64ED94CE7A
+:102A300062BD94823D43A99399C9EE9A07FB37A6DC
+:102A40000B9893D2EF310FA599E99C7E2B580BC1BF
+:102A500077B3764A3B80EF243DFA018C9476829CD2
+:102A6000C3F44D9073987679252665A31F2087D2ED
+:102A7000235E3BA5C7BCC594F6781D54EF6D6F3936
+:102A8000A5EF789D949EF05650DAEB7551BD53DE5C
+:102A90001A4ADFF57A287DCFDB40E969AF8FD2DFB4
+:102AA000799B291DA5077EC6F9CDE92B447D3EF50E
+:102AB00023BD4302F9EC91E5D26187E699DCF1B8D8
+:102AC0006E1A66403A285B2320FD5973340E3FA4EA
+:102AD0009B72560BF742BAE104D7DF0CD648D20FEF
+:102AE000AD6DF58204ED76087DDA0858CBE9E9A9E9
+:102AF000738D209F4B3AD9BA083BC2194F1981EE0A
+:102B000076E83CFD3BA0BC64A734D7087BD6E4C87C
+:102B100053FFB18FC3543EE9086B34033C2B3DFB9C
+:102B2000A93881E381C2EF7B3B73E6AECD443C25FF
+:102B3000C2F3C534302C51BF7EC444FA7561DBD971
+:102B4000420DC0931A4C45681706D4EB42BA1FAE2B
+:102B50005E70B9F2DDB65596469C870D9F805A0E81
+:102B600059A9197D85ABF3D5ED6ABE5EFF4C7B8319
+:102B7000FE03EB0937686F7F96A3327DC2FF7E3A72
+:102B80000FA66FDDF58FF66BC80F648EC1FD74570D
+:102B9000349733FDA09FEE04BC77C5C8F0C64C1A2D
+:102BA00017CA435CB70D9BD2FD3E80778539571F0E
+:102BB000C7F27FD4D87742D1AE70D7A65C8233C932
+:102BC0003FB121C69313938FFA3CDF975A931F0DA1
+:102BD0009302F8BF399DCBAFADB75CE9DD81764498
+:102BE000B38665C1773B9B976FCC81767EBC19F429
+:102BF000078047DC5ABD310BCAD3376A266A65198C
+:102C00008778FC7873F59E4DA85F258F8EC98676F0
+:102C1000336479991ADB57B806E8BC55AFB6A79567
+:102C2000F49F647EA98666CE826C4D95EDF41D3AC4
+:102C30005611B8DFFD4CC6EF57593CD5DDCEFD57D8
+:102C40008691E1FE2760FC2523B9BFC3B2CE48FEC2
+:102C50000E4BF27F9DBC03CA2DDB347654E9446BE6
+:102C6000ED5A1DEAFB8B593BF2E30E817FEF4BE1FE
+:102C70007A21280AE97303ECF2ADDED38B3203FC30
+:102C800084B60A9F80F67BC9C85AA10FF79FE40754
+:102C900005B4FB2D152EC11589F68187CACF65B9FC
+:102CA0007E920EF8D92AE1FB40FD92B912705DA127
+:102CB000DF8A76D2F35851607FA7B3F83CAC073B6C
+:102CC00099F4D5757AC22B78BE4E65971EC0F695DD
+:102CD000750C2EFF7E06B7AB773D015D201F4CE2E1
+:102CE00076F389DD89A43FCE690D77A0FD74E2A952
+:102CF000D165046F99EC403DF2C4EEC9D3319DB368
+:102D00006526D53B21B01EB487E76CB95BC4FCD403
+:102D10000CC00BDB3BA3277A9CB3E541F9FB47CB07
+:102D2000B0BC58E3FB09DA91C58DFB22D04E9E1C46
+:102D3000F94A12A627347DF5DDD0FF5D66F62BDC5F
+:102D40009E9D1BE3FEB11CFE31F7A9741DEAD7BF9F
+:102D50004B4FA7F59CCF1CC4075083ECBA5BF6F62B
+:102D60001E064D8ADDD6DE3F15CC5CE6E8301FC17D
+:102D7000B4B4CB5E86D357D6E33C82E9F45E4F19F8
+:102D8000AA2FE5A75B8E60BA24D7F53B9C9F17FF5F
+:102D9000E17BAFBC08F0C8C7EBCDA807653ED137D3
+:102DA0006327F9EB740CF9216B92A7458B046C74C3
+:102DB000C6A07C78F6695183FBB921AD250C61C3AF
+:102DC0007DE91AB40B7745B7D4D0B8B3C219CEE3B6
+:102DD000DBB00F215D64453B63909F802F691D3EF2
+:102DE00093E9D310ED3147637E18CF1FA817CEE1CA
+:102DF000F303F55AC204EA274620FB13D406DCBFCE
+:102E00006DF2FEDDC63C09381FD648CF0EF4EB64E8
+:102E10009570FE67919C2EB07AD344FA849CCD962F
+:102E200016CF9DB80E5697E8EB0BA43BD80607F4D7
+:102E300091748219DAD75B050E839C21BCF0877EE2
+:102E40000C8BC9427A8D82BFB502DA0BD033701C6D
+:102E5000F34C83DF2974179BC1C73542A6BFAC650D
+:102E6000BC3D05DFB80C2E9F016F4983F868657C77
+:102E7000601C9A007C02EAD1F806F066761BD20547
+:102E8000487A81A74C1203C75FAD7184A15D647A53
+:102E9000F5FBE84F8942390278FE53F72423F269A3
+:102EA000F0387232D208DF46D087516F9FE9E2FCDA
+:102EB000DB58E911C83E4218C79F2C3AD01F68352D
+:102EC000AD167401E3B526F37D7A66A5A71BE5CAA6
+:102ED000CCE2083BD2F79DAC7D9D99F3F7914CC0B5
+:102EE0006F141BF899D8C441BDF0474FBF7B1297B0
+:102EF0003499B597E4E2FEF9F8FDB370FDB63E3AB9
+:102F0000B307F14FCC79AA3B061A745E94D77D19AA
+:102F1000F7EBA46C133F0E1C479207E040BF448DB3
+:102F2000BA1CE841052B7465131AA271BFD144E4A1
+:102F3000CF9C817A4A9486E43BC829614148FD339D
+:102F400088AEE4F957D6E7AE8C4C5A37AB89AF035D
+:102F5000EBB71B1746CA8355D609FA6D04361F0115
+:102F600074DF58A6F50B68D762FD28ACCFE29D91BF
+:102F700043D769874E9A3903E5F4C31AF36E367462
+:102F80005E81DC7E4B7AEDC371540EF9A291FC7D1B
+:102F900001F86A43C1EAF5B859FD6DAC6BEE8CB42B
+:102FA000A1F989C90B66E23E9B58CB68FD83CB47EC
+:102FB0003DA65E57B237C7A3FF88F9BBBEC17ACE24
+:102FC0004CDE5586FA7CF0BA2A74971A1B7A5F1089
+:102FD00033395FA646D84F95935E21929EE04C11FF
+:102FE000E303EDA20D197C1FBAFD3513ED43EC236D
+:102FF000A31FB75C7B57EF93B9B00EA5573468AEEB
+:10300000B0A3EF1CFAE14C48A7FDEADDD5FF0AF5B5
+:10301000A67D651A87F96FB0BE19E810F1F5809D9D
+:1030200001F0DA2FF6B4A0A3A4B192D971DF55FA5A
+:10303000D923F7F30B9DDF49F23557643B490E82E4
+:10304000651E402F0069897E78197356B690DD6839
+:10305000CDCC07598D6EBDF625B45FFE49CFD0EFBC
+:1030600038AF42D295C0F8E7554ABA65E8C7175954
+:1030700039EA11F32BEC943FBFD2CEF38D3C7F4164
+:103080008583F217543A78BE09F2613E1656F87BF2
+:10309000BDD0EE42538CA4413F78A593975F355045
+:1030A000F93B600F6402C98787F949DEB77CA6E166
+:1030B000F1124FB85F005C0D91453D12CEDF7D1AD5
+:1030C0007B162486149199017EB6C2E9D742F9F3A2
+:1030D000CC9F8013F946F56A6736E4BF912C9A714C
+:1030E0007C6F38C06EC6F9AB1569DEE907F01B3599
+:1030F000C914CFD821FBAD7D2B8CE467055D87FC1F
+:10310000AC6C45A2ACC7F0F26DCBCD7ED4C7400EFF
+:10311000D23AF6DF27921E00F2F0ED1CD48B5ECA85
+:10312000B4874948B76A7EB3542F2FA1F62A99195C
+:10313000EDF25995BCBDC697347E0DEA55A679339C
+:10314000910E1AF7323BDAAFCF569F2A8B45789B08
+:10315000DDCEE5875A2E34566F392EE1783C1A734E
+:1031600016D5E77EAD464FE92EAD30C8CFB4DED2DE
+:10317000A0FC182A6FEC3DD84E4255A97D13D4B35C
+:10318000C038D18FBD4DCFF37DF7881467B0548B15
+:103190005DE68241FE4E91A7D0827C1845F245C57E
+:1031A0005FA35F52C33F92F914F85DC471F97631A1
+:1031B0003BC9955DEA7A20273528AF52DAD4F96702
+:1031C000B204C52FA59A87E079B67AB8DC0B1EE762
+:1031D000E0B8BAC246D1B8347C5C28D7203FD77457
+:1031E00088F2732B45BB24A1BC6B3F85E31FF5928E
+:1031F000C8BA009E555D3413E969D6660DB94366B9
+:10320000B35E920B371BB7E2DF081E67F0F8366437
+:103210006869DF1CD007D71B491F6C7DC4A4C1B8E7
+:1032200022E85BE1E8573897551A9E09F33022539C
+:10323000D6D7AF6BB93C6934119DEAAC8FE504FA7F
+:103240001F84D1A523B0BEEE7AECBC728A1BE9685C
+:10325000DCC172AC58966393FA607C2AFF73389392
+:1032600002E6F7D6FE18157CFBD54455FD12102E4C
+:1032700081E5538D79AAF269E6712AF80EDB1455BF
+:10328000FD19D254157C67CE9DAAFAB3EDF355F023
+:103290005DC54B54F5E73AEE5595CF2F7F4855BEA7
+:1032A000D0B946052FAAF87B55FDC5AE4655F99213
+:1032B0009A2755E5C1F693929666723FCF569BE7E3
+:1032C000A483E48B4B70460EAD67A914FB03D73D76
+:1032D0002A82EB53C1F51AE5F57841E0FDB1FE48CD
+:1032E0000DF29DE27F63ED912AFF5CD7E4C9C63EF3
+:1032F00013FA72ECEF23DDB213DC1FC5FCFC3BC5F7
+:103300007FD5FD04D483F65647A65B71BF43BFABA0
+:103310004B0FFDF935E4BFB736D70BB40F6EAEE7F0
+:103320007E95AB7AE68A0DC08385F37EE5788E8242
+:1033300027734470FF6018CFDF26FB959E43BF5272
+:1033400036633FB0287E7817B59B50ACF7A17F4617
+:10335000A8F6087A945B2E66364828079753FF979D
+:103360002BEC2358887956D256AF8D39A07D5BBDA2
+:103370006FAD1EC656973969CBB3D0BCCDC3C81F3D
+:10338000F368E6942D6B81E7FF2153A2754910F98C
+:103390003C3F5FF7C6B93DD05F6B95A508E56A7005
+:1033A0007992BBF3E2B11B943FBFF2D50FEEBFD1D0
+:1033B000F7751D679A02CA87F58B56243247001DA0
+:1033C0004886D07EF91FC874E59EAC273FD6335A95
+:1033D000D793C8CF1726FFD7C4BDF0DD79E9CA3D22
+:1033E000A8A743FE0F301FEAD1BC9ECFBC44E729FB
+:1033F00052F340BF47FD3B2C34DD1E94DB17AD95E7
+:10340000FDE8075A1DA997D0CE4F327E467EEA0EC0
+:103410001DB7AB83EDF7E707ECED76B2BFF7CBED69
+:10342000EC9653AD997FCF8C3E265AE4F84088F94C
+:10343000D046B50928AF12ABC54F02F9A23B524F97
+:103440007E048B49F63B986A547E01C56FD01D7986
+:10345000BF80746FE95A417E7AF417607B07E57587
+:1034600009F6172419FFB4E8E3D81BB5CF06F223F9
+:103470008410FD04E1A1F82782FBF1A33E81FBCC7F
+:10348000CA70D22782C77D39B3E450663CF248FF48
+:10349000C93B507E9FD2D17E381CBD8449E1CC1FF0
+:1034A000D07E6F26B7EF23726254F991F644E60F8F
+:1034B000F45FB364F32711320C5BCC487DDFC65157
+:1034C000D8DFDBBCBF133ABB8DF441D8F6D0FE7B0E
+:1034D0004FE6E7EE5C4669AB6C97B7011F63FA9C59
+:1034E000D74CFAD936E03F84B77B254AFDDE1C4A2B
+:1034F000777AED54BECB5B4CF01EAF83E0BDDE723D
+:103500004AF7799D94FF92B782E09F7A5D94B67BEB
+:103510006B28FF15AF87E003DE06825F457D5044D0
+:103520003F7533A56F785BA8BCD3DB46F09B5E3F4D
+:10353000A55DDEBD947FC8DB4EF0116F07C1C7BC2F
+:103540005D04F7787B287DDBDB4BF9EF784F13DCEC
+:103550002B8F93B1E65E2FFA2B5CA284FADDB3AE1B
+:103560006A33EAD7B6651A338AF336976605FA39AD
+:10357000B655F2789F6D9586FC40A087FA519FB3AF
+:103580002D7BFAF8342A5F40E55BB149304AACAB99
+:10359000B8FECA56EAA99E150F02C177DB6A2BFD59
+:1035A0005A805BB2C3A9DCBA4A24BBED798D273AB5
+:1035B0009BEB5D24BFAD3AAE3F28741021FBE9229E
+:1035C000B2444A976573FCA33242EF2319594AFC6F
+:1035D000A4B907C767AB82F121BE55F5468C5F5A87
+:1035E000EF83F149A43FAE3A047824C378117FC039
+:1035F00087FCC26C19D797AD55EB08AFE465F3941F
+:10360000786734DAE96D9EFAB9846FA5487ECD36C5
+:10361000D7A1E8FB504ECAE77CACF1E14E7FFE50EB
+:103620007C3282F0DFC6B8DD900CFAD2FE10E300E7
+:103630008B47A9C7FD788F1943FAF126CB7A62B27E
+:10364000C0F98F3D2C12FF6D67A0F7C177CF817E47
+:10365000E7433950BA6F15FAAB1ECD724DCC023C20
+:103660007E248D3F24021C53CEDB4FAF17F7A01EE4
+:103670000DEB7DAE09F2373EB8D989B671EC6669BB
+:103680002DB25BDBB25713D0FF952CA8D74749CB9F
+:10369000653CB63B787BCFD58BE44FB6AE3A90769F
+:1036A00084F75B86FD268EFA7D18BA613216481AB9
+:1036B0001419C955E245EC2FECA1CDE5D85FFC66A5
+:1036C00087D25F21F6F775E769E4E365565708BCD2
+:1036D0008693273793238BB322E3488E24B1249417
+:1036E00023CFEBB8DCF29DE4FA241D869934B41F95
+:1036F000257EAEC4D383E3E835323D241942C76149
+:10370000570DE8FD3EAAB7DDB1C949E74B303E0B86
+:1037100045AB756C05AEF3EA9270F3DA10F4A0A431
+:103720005B508E01DFDF8B4623B5B3B99CB7A3E1B5
+:10373000EDDCCA56115C6232FB42C86B257D5A6EC5
+:10374000E7812C4EB7490FBEB4F118AEEFDB3A3A21
+:1037500013F49CC6BF11ED04DF092DC9D7446DFBDE
+:103760008E3D017835CBE3794EEFCFB523FF407B1B
+:10377000F92857915FF2C97FC16605CCBBF2DD5ACB
+:10378000D98FFDA36B1BA229BE5CB52E0CF5A33609
+:1037900066247AB0EA3CD18501F46045BA0C411F39
+:1037A000FBB2F44A3CD5543211E3327C5F9E8A72FC
+:1037B00009F03E581D45FBE1D465EFDE3916E05BAC
+:1037C000AE8876D4CB9EABE5E71327FD5143E726C1
+:1037D000DE7C9CDB7DB7FDB7B21EF47B27C8E9B366
+:1037E00068E7417A4B33B377C1BADC526D22FFCD23
+:1037F000AD57C5B381761AB9A4C7A37DC1FD3553B2
+:10380000FAA13C80FE267DA6AE0F33AA453D23A13A
+:103810004F9D6FAB3A70661AF4D356CB3F6EBBF632
+:10382000FE71847DF51AF29300F529F49340FE4D64
+:10383000D19780E716371A19C973EB32A319E541FE
+:10384000B7259CE45FDB6213E9A11B325787A19E79
+:103850006CA8AA8FC674A4DEB7037DA7DDBBFF7D6D
+:103860009E2D81E42D3F7F8184590CFAC0BD7AAE34
+:10387000E4F8FAB64CCB4479A9A1F2C3BBFF7D8B27
+:103880000F7D07AC85F090342C910F7E00BE9BE23B
+:10389000D402DF2F40674E44F874AEAB07E54342D5
+:1038A0009CAF1B8BB69ACE56D2F9E2CA38E2335D92
+:1038B000B587E931BFB2C818C8E70A9FFCB5FCFF5D
+:1038C000B41CE7BB991CB859BB37E3F79FA573BE7F
+:1038D00019CE9E360C234F15FB18CF9A638A6C4B7A
+:1038E000FBEA597D48FDEAF66CCE67C57A7E3E64F8
+:1038F0004EC5F4728AC3F8FA443CC79693CDF9A931
+:10390000CD124971E2B674D6857103DF720DF7F7F7
+:10391000C4F1FFDA2AD3C93FD42A78A27D19783EB0
+:10392000C29586EBD706731409FDB7A672B9CEFC13
+:103930001E33C6ABA19D9A40FCC1DEF3A9E9989164
+:103940003E4CFE0B2DF19EA40FF0B7A35F1CFD179C
+:10395000C1DFDDDAAF866FBFAA864B984E054F35C3
+:10396000AAE16966356CC9E67AFA1D3675FE0C491E
+:103970000D27A71C09D3F073EDA6017FB344F0BB5C
+:1039800099017EA00D9A7601E725A5AF96FCB2AD10
+:10399000A9DCDF935CAFF67324B296B53102F96D02
+:1039A00054F9B6FC5502FA736CD5EA7C9807158C6D
+:1039B000CB8AF4BF24D7959F8D71E9027EEE3A4BF6
+:1039C000EBE9CDC575688B233E4A93CF050DDD1F0E
+:1039D000B7D0B89576900F7C01E345FA0F842FE6B7
+:1039E000BA2667C7733EF005EE97F97D3AE403A562
+:1039F000BFE1F841E1C762396EA29CABB922B7A51D
+:103A00009CABA997CFC775049DC7B9925C46E78167
+:103A1000AEF4AE090FC577C867BE6CCE77986E94CA
+:103A2000CFD720DFF9F49CEF30DFF0D52A6728FDEF
+:103A3000F0BCBCAF3CB437CCFC71C0F856B647AB59
+:103A40006077478239F0BCD343F80F74BA37333A02
+:103A5000475A2B0FE78B33BFDBD308E95B5A970B31
+:103A6000D76765D6593D8F33F5EB51FE9E97F7DF4B
+:103A70000D82DD385AC094DBA58D66BB11FDBDCC2F
+:103A80009FA1F257287E87D52BD2AC3180FF8801C9
+:103A90003F82D34CE74DE333C98F1135D571372BB6
+:103AA000043CF7CC986F04A2DC854E5590C78F6517
+:103AB00097FDD0973C385E03FAAB02CE2319440F32
+:103AC00023B97335954901E7CA5B65FFC5001F9BA4
+:103AD0009697607F3FCC96783C8679D672FF9FDAC6
+:103AE0005F66B86A53B533D87EB2AADF56D92F7253
+:103AF000F3F6D5FE37C3D5F461DACF0E6ADF1CB218
+:103B0000FDC176D57EBCAF111F6F433E18CEFFB509
+:103B10005F96A71B6C9E5EF47FE918D89514070684
+:103B2000FA98886A23FF69C3F979535DB2DA0FA660
+:103B3000637E921FCF47D690FC48603E8ADF59983B
+:103B400087F2D7474DE7F1BB60B9711379C1988708
+:103B5000A1DE00FDA9F2573FC2F7D346C1EE423CB9
+:103B600083C7F3FF8ADDAB891CDF4BFA734AB86465
+:103B7000B881DEDBEA7525E3F71BC23D3518EBFEA5
+:103B80003CBB2E763DE83D1B30C6087C7635BB71CC
+:103B9000BECF84FB24A78FF5711AA227CBDD961D1B
+:103BA000DA007AB2E85D69A8F75A34F2392FFCA13D
+:103BB000BF6CBD65E7A610FD2BFA9B025B2B008F47
+:103BC00000BA6D95F5E681FE9624EED006B4633119
+:103BD000B80AA93FE55CA3D25FD337EB6FABECF734
+:103BE00052FAB3DEA31E9F55EFA1F159E5FD47E957
+:103BF0006F2B8E2F045FDDB43FD98E1EE86FA97A3C
+:103C00007C568387C667D572FFE1407F4DDFACBF2E
+:103C100036F91E934DE6D3E1CEFD370E9CAB761AF6
+:103C200051AEB429FE40797FBB14B4BFAD96F737CF
+:103C3000E5FB4B71E9E4DFBDD433DF186A5FC3FDF8
+:103C40008CC97A2493F54826EB9108CF997AA63E41
+:103C50001EE8B0F0C5B6F922ECE3731E3A333E1508
+:103C6000E0192FF6CF17615F9AF3E2990349F0C983
+:103C7000CB2FBECCCB7F78E64A32949B7CEFCD2F06
+:103C800003382A96EFC70ADE4ABFB78DE27AA3BB94
+:103C9000E173EEBF04F98AFB5663AA87A17FF14264
+:103CA000727FD432A8EF4EE9B72C0F312F4AEA6E5B
+:103CB000384F7E46147928FFE6E1BF40B4CF53EE7B
+:103CC0006794ABEF6744456D22FD2F8CF9CD28EF4B
+:103CD000228C0EBA4FF8D628BE1F2C64F60A6E3717
+:103CE0004859F2390DBACF31BF586ED77CCBCFB11E
+:103CF0007CA1C6B11EEDD9DF4EAA8A47F558391707
+:103D00009737787F72D7F51B9C1F0EBE3F39E7238C
+:103D100081EBC223B8BFA53B57E2F7B902FC86A8E6
+:103D2000F70E379FB5A3B87D3F389F0E3E9F310EEB
+:103D30003E9FE6FEA8B5B0FEEEE87ECB13C49F5DC5
+:103D400021E76BC8BC06CD5FFD28A6D8795AA4B779
+:103D50009BCDB732AFCAF9C14641CAA2FDEA4F793D
+:103D60002AFD8331BB142A8E83F419B8BFEA6D4E45
+:103D700086FE195D9C3D07CF9537FE451BF25CDE44
+:103D80006E793ED64685D3B9CEC6283DD9DBDD5106
+:103D90003319FA9745D3749A97B2A8723A6FA98DDE
+:103DA00065ED688F069F23D78EB89BCE0169AD68FD
+:103DB00041403A702ED961A4F889B9E886E7C8C5B0
+:103DC0009B9D238F99C9CF9147E9257459B445EA42
+:103DD000439E237F6C14DFF7BB713C71883F8C27B7
+:103DE0006D701CA299C7D1313F02F2F56617237F8F
+:103DF000BA3CDEC7E47550EA1BCC1E86F240ABB776
+:103E00004BA8A768C3F93E61B069584E08BFC8F710
+:103E100047E9E8FB4F72CD34AF1A23D7CBE7FC5A02
+:103E200008E94F7A7594E24F0A4D67C3D1C93C0D3A
+:103E30003F47A7F0E102939ECEF72D30D94AD10F2C
+:103E4000B20008EFB39880FAB72DE2F78145BB0DB9
+:103E5000E9E737536EFFF96F18BAF9B97C3E35437D
+:103E600047F7E34E09CC618F197A7ED5E98C9E869F
+:103E70006E9ABB669D5987ECF7E2F2EF15617B867F
+:103E8000E353751689EC9F7746A15CA84E5B1F0F24
+:103E9000F0A2CA421DDDDF94E344EE082EC79FD195
+:103EA000BA4E8EA278D1E751A54847627F2AE2A395
+:103EB000C48902EABD372A9EEACDE1D7C5A0DE1843
+:103EC00094D3677FEF62B41EB6507A12DA4F2C306B
+:103ED0006E23CB07B4A302F3D17E6201EB272C2F14
+:103EE000B6F68590174A9A60DB92520D7C9E90D070
+:103EF00042A992FFAC435BEE0FB1AE57E575FDC62C
+:103F0000764C1B603B71D08E01FBE52ACEDB17D5CA
+:103F1000A72CE36148756517C98EB1E9153E9388F2
+:103F2000BF06611EAF04FB4575DEB0D5EB4BA1FBB0
+:103F3000FEF2386D2BD646A31D03551C489FDBBCF3
+:103F40006D29659983E3C8CE91E9138DB689A817C9
+:103F5000F35F725CCB0CF497249B34743E012653C0
+:103F6000752F616E59F4B4383445DDCC6E92D02E85
+:103F7000EF253D3FE1BA96F820E1F0628671ABA4EF
+:103F8000B87601EF030DF423DF6FAE97E3B9575C0A
+:103F900065348E04EBC0FECEC80E8DF3CD4579742A
+:103FA000E5698E51C28FD5E5C971FCDCC2FDD5E152
+:103FB0007E09E83AA9B6574038010C38F4C5275CA9
+:103FC0006F4C6B4279F25A04F98BB56D99CC07F2BC
+:103FD00027557445E5E03CFBA5FFA6C990070BDF1C
+:103FE000AD7C209CF4B336A16506D925F769582825
+:103FF0003FCF981CEEC728C8E1FC9F606B4DA91EFF
+:1040000087E9D344375F97CF6790B31DF4D9119FE9
+:104010002DFA581CD47B9A75A1E9739BDCEFC07E06
+:1040200021CF5F187319917FB582933B39F7EEDB8F
+:10403000B7CF82CE1346E75536C97A8DD24E444E5D
+:104040003B1546D81D0CCF450A6607DF07CC3E9BC3
+:104050000FD6ABF92B6D487BEBC11C791F496BB2B6
+:1040600061FDB24CBB0DFD94C1F7551AD326DA7031
+:104070007D1A670CD0A931705FE84ECB7E1FCF53FD
+:10408000997A742CF01C5970AAC77321B1372897FC
+:10409000CF97371DE2E7429B4C45BD780EA1C9146E
+:1040A0005744C7FE4CFC9CA952DF643A46F2DE64DA
+:1040B000E7F15613EE0F02A2C7E7A13BED18CD833F
+:1040C000526F5A0E97AB267B17C3FB5BE1763FD549
+:1040D0000B139D3E0DE01F16C7E8FE4F9891F35558
+:1040E00004AC8F3180EF957E6FCBD1D1BC352517D5
+:1040F000F596107E22DE04674DB6221BEDDB38DF1D
+:10410000D06F63B442DF9CAF1F97E75B69A7513E56
+:10411000FF7A4F43CEFCB258F41339D7E460BBA604
+:10412000E546B483B491E36FD8DE8661DB6B5E282D
+:10413000B7F738F28536B2C88CEDE9505E84A0C37B
+:1041400067E476FE57E3ED30B374DF97605A309F33
+:104150002D94DEA3A4468CA38F1BFADD3796BFEB0C
+:10416000D47E2490BF7B71FC2B93CF1E2BA11CEE21
+:104170003FDA2EDB278A9D6191DBDE2EF07BE83E65
+:1041800021DC4EEF36C87687254C3D0F83F741F989
+:104190003A5CAEE0E7E62EC7318A6B04F3F3E577CD
+:1041A0003E8A0EB44F50EF736473BB0453B44B1C80
+:1041B000B29F0D61F41BA09DA2F0FD805FB742FA93
+:1041C000A75B003F03C86F0DB42B247B88BE0DC9CD
+:1041D0007D69C8E7A9F23B0543F6D75C2EA7854762
+:1041E0003F4B43FE2E8BEB4FC0EF82F9FC8547AE71
+:1041F00026E0785E983170CE86E243AB17A7F37B5A
+:10420000D9C7FF1CED0AD1FECDEE7F459DDDB486FA
+:10421000F4C0E55C0FFC5BDF07DBBE8CEB9D1D8211
+:10422000DAEFA4CDE57AE75FE47DCC7A55A4F72DEB
+:10423000CE65B92E201FB60AE6E5287F531FE1E7B9
+:10424000E6563F5EFFD90321F84118EDFA734E8020
+:104250003D5CDCAC273F5AA3297DC48DE21CC3AF73
+:10426000B387CB71797D4B1E35F2F3242EAE175BED
+:104270005CF7D33995E0F323C3D53B24CB3DA5BEF2
+:1042800001DB4779629A47FE804B6823A0BF4D96B9
+:104290007BC17876E264C8F36304B9127568451887
+:1042A000B6AB93EDB1ED8A3FA3A2C8E808F85EB7BC
+:1042B000B8C8581A402F8D8C9FDF0D6EFFCEDC01E1
+:1042C0007D5AA5AFE8709F45DF509CF8A7013943A0
+:1042D0008A65B8CA8E51FA0F3E3F16705E2C8CF379
+:1042E00029B7675AF1DC18E8B76B2B968FC4F96DC4
+:1042F000155D2F58611EFA3F30D039E70F65BEECCF
+:1043000093F972B8F5F3B143A08C31F6043B829770
+:10431000D6804EC68F40FE68CCD494FB438CB35CF1
+:104320001E6708FDFAD6DCAFA75F97E686D0AF51CF
+:104330007F7604C51F0261D49B1D21F4EB1382EC30
+:104340000F90CFED9CD0491D7D300F276E1D616F02
+:1043500094E89E91C35E04F6C38B6732516F9F232E
+:104360000CBCC723DB318C60B02316225E739967C7
+:10437000DF0302C5515AEE48A3EE045C8F9BADA744
+:1043800024FB1137C23A61DCA1F5DAB219A1E20CC3
+:10439000FF38402728BA02EF07C02A04C49586C414
+:1043A000CB82E263184E1938FFAB1D5AFFAE62751F
+:1043B000FC6AE335EEBF30AC60FE27043C1FAA2E3A
+:1043C0009F5FAE0B8ECFA9E25A0B9DBA607C7C88B2
+:1043D0006FB28C6FCAB607290E3E2D45E4FDAC6462
+:1043E00064CF07C7BD0C85BD0E2DEAC3158CF4F74D
+:1043F000603F369E1725FF5E0563CF0974DE5A7D48
+:10440000DFE4E959E7F8FB1C2DE5D88F2D53C350A5
+:104410003F0EBEAFA0C49BF0984CE07D69E5DD2265
+:10442000CB620DE1C77CB753B9E29787FAA6124B6E
+:10443000C0B9EE556CA03EDDA3F2851EF7D6D65965
+:1044400014EF4F1CEF29EC82A2243BA37948AA6603
+:104450006407C03CA8E2FA86945D34CE4B358CC527
+:10446000F238A0AA3C017670A44F18BF2ACE0FE301
+:1044700054C1C176E7CDEC4D434AE60DE5F9CDFCDC
+:104480008D06395EF8466E641CE93B63D818D47714
+:104490002C8B9FA6F5B804EB817E59348442C5036A
+:1044A0003743FB6807BA905FE2D1DFC454EFCA30EC
+:1044B0008748F7C984628EB310EBE4F1E17C46FCD7
+:1044C0006D0807950BF859986C70E0BC1B0C00C385
+:1044D00090053D332640BE56F637AF1598883033E9
+:1044E000DB8DDC4FA8BC6BE3A7776D86EB0774FF11
+:1044F000BE30ECCFC7BF53FA19F28EDB0DBE27FBDF
+:10450000CD1CFC7D19F91D95FE879BFFE1DE6DFB3F
+:10451000C3D4772770BF6732D16BE520BD12BC4C86
+:10452000A647FC1EE5C2BD4AB1AD770CDE373CFBA9
+:1045300070841DFDE003E3F0DDA9E5EFD1FD75ED2D
+:104540000DE0619348BE0F8C4B6EEFAF1D17FD025F
+:10455000E4DA06BC3484E74F2A199D27B0B84ACF65
+:1045600089740E00C6A0921301EF13407B1B0EF15D
+:1045700073AF5BF19D0B71B05FD42BD06EB0554221
+:104580007E083B4849AB19BF1FACE0D5A8073D1AD0
+:10459000E952C3F5E8D9A63E11CF35E9E2FA45E480
+:1045A0001FE7682EC707E8379ED1F90B6D927CCEC6
+:1045B00071A4C4DF4DCBE4FB9BD2CF84D11A59FE4A
+:1045C000F7D2FB47B3234ED54B76C6F2F6C52F4440
+:1045D000FFFCEC11A7EAD3002ED867E170D2A92B1B
+:1045E0006966C6ECFBAC0BD19F3F3BEFD495748062
+:1045F0008BF6D978F9144646CEF87D090BD19F3158
+:1046000061B459D5FE5B38D7F1DF3CD51A3421CFE0
+:1046100063DF365A394FC9E83EADB3F397A7312E61
+:10462000E954F647872E48DF81220BDE23937F7102
+:1046300051140F9D29D3D99DF8EE5214FA2DBB6861
+:104640007E470DFAE99FFE6BFCF482437997CACC52
+:104650002A81FF1B1B982B2C2380EE9943739D9F6F
+:1046600003A6B881828FD2FF10BC6069C59840BC98
+:10467000B6513B0A5E170A0DA48705C7872E08FDB1
+:10468000DBF19C54C4CFD62FC275BA10D99F2A0033
+:104690001C9EB79ED6ED427CFF76C11E00EBF83A19
+:1046A00056EF2BA275FCA3D6513D7A02BEDBC5DFC7
+:1046B0006F6896E3504FC6BB7C689F01DDD1B9326D
+:1046C0005F8A9EFC4865E30547A03FB06E34F7CB98
+:1046D0005C92D3698616CF49A04BF70181AD85FA6C
+:1046E000EE6B97F5A89FCCEE3CA3473DBAEEC01900
+:1046F0003DDE4BAD4318DAA9DBA67784D2FFFE324C
+:104700005AABF2972976D7D194ECF5E877ABAB1694
+:10471000E81EDEEAD7B91F6EF5321C256377DFB2DB
+:104720009FFCB855CEEEF5982E657D47F1DD88C526
+:104730002EADEADCC0929A08553CBECA13AB8297F4
+:10474000B6C0EAC03EBBB42149F51DC35DCF82EFC0
+:10475000280EFED0FEAF90D771B16D732FFABB1645
+:10476000BBD47ACCECCEB5620CE2ED11EC1ACEFEE5
+:10477000127EB7848F10D200BD0AE67D5A07D7A3F8
+:10478000EA2A8C649F54220CF35A59ABF5E39373D5
+:104790004753F454EEEE10A8DC2D97BB6B046E5714
+:1047A000CBF275A98CE3928327A7D175529FA337CB
+:1047B0003300DFA515E5E7881E657D43195785C4DD
+:1047C000F58D0D29EFE9B0DDA5DF17586C1A8D4B7B
+:1047D000A5472DA951C3551E5D909ED5A743F9BD90
+:1047E000B4419DFFF3D1F2BE9EC7F2909FDE182D1B
+:1047F000889F1807E13FA5BC7702EF815DD23A0F91
+:10480000227DD6EABB0A70DFBBA47511AC94437E4F
+:104810001DDFAFB8BEA201CEC3EF1B750E33DEA7FE
+:10482000F5AD14886E97B000BD276DB03EC1DAA11A
+:1048300070BF2277C39CF5E40F3D2898516F281371
+:104840001D22DE836F1CC68F7E51E68313AC2F1FA3
+:10485000F1CA46228575CA9E3F82F699ECB796F951
+:10486000308E943D4E20BFC49D80714311A622C955
+:104870009139B03784419AAD6DAF20F93E566FE65D
+:10488000EF62DA58A0BC70FC331370BE1075B20B27
+:10489000937BE8FDBD396D9B2FA25CCCCC70143DA1
+:1048A00005F83D19C6FB7FF275C1BF16DAA9CB3FEB
+:1048B00046F2D30AE481FDD6D96439DAA1F6CF5A9B
+:1048C00051AE21C1CCCAA77E1394F832D015EDC3E6
+:1048D0005DA5A49F58E57E9F2D94B8DDFCA07C2E9D
+:1048E0008DF9D6E2F9FABED18CF295F41BFBABCA76
+:1048F0000431285E50371AE679A5AD4F75DEE95BC5
+:104900006CBF01E92CB87D18BE2A5E394D7B2D8A1B
+:10491000EE771DCCB0DEE8FE94D6A83EB7A4338770
+:1049200007DDBB53CB9FD9F6A4A07B771941F7EEE7
+:10493000F282EEDDA9EFF92D744E09BA77A7BEE732
+:1049400067B0CD54D50F93E6A9E0889CBB55F523FD
+:10495000EDCBD5E7AE8EFFBC4248C777067D7D2EF6
+:10496000988766E08DE298C17D242F0A2A431A3E7B
+:104970002ECC846973A1A10BE9A43991DBE786E30E
+:104980000FDBBAA01DE388978CE86FFC89E02F4508
+:10499000FBC4289F5319FD1853ED33AF1570BE5259
+:1049A000D2DBF25CB3F3617DF2F74A49FC1DE0DE35
+:1049B000D1B83E467C6C03F9E6557EAF78AC6C47C7
+:1049C00028ED3C5F5832350FBECF7FCC3183E2EC0F
+:1049D0001DFC7EF04E3D8FA7F85EE5E75BF33BFAEA
+:1049E000348E00FE3E99C7F590679CA5141FA9EB75
+:1049F000845D16F9A9EDAC1EEF65D4757647E17EAE
+:104A000056E03CAB47BFC960BEBCCF89FDE168AF93
+:104A1000FFAC3D743C6D6D9E9EF8E3982CD7AB1EA9
+:104A2000D672BB913966E1B971455E57EDE7E3ABEC
+:104A30005AA8E7E760311A1D426E839C3EAB96C3CD
+:104A40000EF57E708B7F3DCA0E90DFAA7A4B174C15
+:104A500027BBB712E436F231C87375797213C917E0
+:104A600090E7AA7C77DE803CCFBF0EDF9D766A425E
+:104A70008EF3708148F378DA3595E6FF199847F49C
+:104A8000A73D3364DEF87CDE6CBE5EC6B50F58B75A
+:104A9000E07ABF2EE0EBF6F230F2FA7D795D770A2C
+:104AA000BD45284CDDCE70A2DB254663099E7B38D0
+:104AB00096F26513C6E1AA7E2ED03DFD7FEB3E6ED9
+:104AC00041FD5FBFFFA805FD61EEF6A316B04D598D
+:104AD000AD4E5A8B7A3CD0851DF59EBA8E2EC27F84
+:104AE00065FBB86ECC5FD921D0FB3DEE0317A7D391
+:104AF00038595F13C60B770E83D78FF2B8FEBE37D7
+:104B00004FE27E3017F489FBFD0183DF2F201D80EB
+:104B10005C42BC5E17F0E535B673A3B122941EF576
+:104B20006FF27C1FD9A867E8AFAF85EF711CC75241
+:104B30008EE98D4847FB05B2B5DDED27174660FBD2
+:104B4000F53A86FA8582DF1729BD1FE2F83FA8D61D
+:104B5000A1A78035566B69BE3FA8D7523BDAFB74DC
+:104B6000042F5EC1CF551CAEFEA82909DAFDA05660
+:104B7000A07B0C53EFFBF3318417AFE0FA5A303DC2
+:104B80002BF41A4C9FC1F43B844E6BBE199D1EC979
+:104B900093EFD5E4B102DCE761DDA759917E1EE118
+:104BA000F7E32BAE1DD6A17F33BDC96C7F02E03188
+:104BB0005AFF7A0BCA89C3BCBCB07687C0E58D7436
+:104BC00037F26152B39EA1BDFB7E1E974BEFE37A95
+:104BD000C5E3D0FA058CAF31B1371DE5529A1C4FB1
+:104BE0007A45C72AF6535C90CB9B31AFD954EF96E8
+:104BF00037E571BD43918340E6AEFDE4976D4FC448
+:104C00007B142FCBE74153E5F6B232FAA7CF85F4F8
+:104C1000AA4C2F67643C14F8B24CFF6CDBCF681FC2
+:104C20009F2DC759663674D179CC3C83EB5394875A
+:104C3000B352DFABC57DAE39FDED7C3A678D3725CC
+:104C400026E2FBC9FC7778D2A7DBD660DC2F379C45
+:104C5000D631ECE053741E382C6BBC35549C434960
+:104C6000DD57257A8FB0EE6A3AA50A3CF7D0397D38
+:104C70001FD90117A7139F5CB5A9DE2DFC54C67B75
+:104C80008CF23E5D27F7F3809C168B8B06EB29F3A5
+:104C9000809E651C6F58D62E5AAF35AB5821A9752A
+:104CA000EC29FECE66ED4901DFBD58A473E84C3017
+:104CB000DFEF8D60251F8BFC1D245736C64D8C748D
+:104CC0002FFB84D74C70AFD746F029AF44E9AD61D4
+:104CD000CE887C6867E1114F16CEDBE1945627DE63
+:104CE00057BCF08E4EA66B33BF2F2ED3DAE54E2D78
+:104CF00033629CEB00E8E3C220FEF75C4DA4FBDDD1
+:104D0000BFC3FEA09F950DBF217967AFB9381DEDD8
+:104D1000A2C2DA334D08BB1BFE3C1DF5890F61FFB3
+:104D200020BD1EF47B9B8072E424BDD35D79358663
+:104D3000DA7959D33F1DF9CBF7A640F76F3EECB8AF
+:104D4000A8B7F2FD89DC73782F1CFDF2B3F2A3B98A
+:104D50001CE92CD4D0FA3A24D53BEBDDA3FF2B0A77
+:104D6000D7C3D820FD7A0A7EDFA365C8BF9B4AFB64
+:104D7000A3CC21E4EF69F4DF65F371B0ECA1E51594
+:104D80007A5F169E93AC90E938B8BC3C7FC03FA1D7
+:104D900073CAEFEB0801FEA12AC6DF3F05BBA72BB4
+:104DA0001CF8B8AA732AF967AA3CC20DFD33C3D117
+:104DB000E1D74DEB18F7CF2830DA8D817E4DB41B4B
+:104DC00099AA7F1F7F072B25F386F774DC7D891452
+:104DD000CFAF6B6614EF5A797534A5E75FDF2021FA
+:104DE000FF18C3FB5BE97E6BB686EC8C953EB5FE87
+:104DF00033A580CB8529057CDE5CF9602FE5B00109
+:104E00007B09ECA27BF3B95D147588A9ECA5E07C65
+:104E1000B2978CF23D1D1013AE5742E07D474169B9
+:104E20000D7E97CA5A88CED93BFCFE72F038D7E483
+:104E3000733E55F87A31F235D26F07E7EBE076E74B
+:104E40001594AC413EDA384C7CAB5CE6FB956D8C3E
+:104E5000E6CBDD1643F3F4056B7396025D7E0178B5
+:104E6000E03DD20B4E6744347C7FC1E58CC0F33DFE
+:104E70008A1CA86B0BA7EF3666CE8BC573A3CD48F3
+:104E8000F7D0DEF98EA9469CE77BDA38FF29FD7D55
+:104E9000D8B53816F96982AE5F6F87F2E4CE335128
+:104EA000A8F74D787D7E2CF2E17078FEFD1819CFC1
+:104EB00086C4121E9787BD70A26C4F007EEE27BA83
+:104EC000E89DFA871A18D16FF7ABFF56877C7CBE36
+:104ED00033C28CFBE6170723E8BDCA0B6F1AE83D07
+:104EE0009A5AF97DD52F747D7348BF7C5D4BF722AC
+:104EF000DD6FFE472BF2A3FB55039D3B7CA873C3DC
+:104F000045DCF76A3B679CC377566B5FFADBF2C3FD
+:104F1000CA8654D28B14F83FBC4627BEF37B5EE4AE
+:104F200072E2A18E7F217DF7A16B970BF07CCA17EF
+:104F300007FFC744946BEEB72E4F4479E6FEC5E5F4
+:104F40008958EE7E2DC2134A5FB95EC0FD3ECA7E0F
+:104F500099F6AEA8F20FAD90E9236D5D0BBD073D4C
+:104F6000E1E4027BE0BB0F13B2344EAC3FE1B76526
+:104F7000B1F7057CB7AE57A438E3F8936511D501B6
+:104F800074794F814EF12F7E23BF0E93DFC719F046
+:104F9000E3F4F2777F36F68AFC7DA31A81EEA183D3
+:104FA000FE32E45E1AADFF8A587ADF8889CE3BC7AD
+:104FB0008C47388BDE05623EE3D1CC003D6971AF92
+:104FC000A6CB007454D169E822FDBE573C43B0AC77
+:104FD0003FDD73F1D3C83421847F26E7D43494E3D2
+:104FE000C17E1AF84522DE8ABE55E971A520FEC1B0
+:104FF000FE9BA51577907F28D87F93D62B6A668F66
+:10500000C7F7DFE93A2F8CF76923F28BA287E2FA20
+:105010001D08C1FF6BC67039A6F0D5BA5E1EFF5DD4
+:10502000D75B6ACC84B456E6AB03B09DFAA0FD759D
+:105030009DF377A31F61DDB545116360BED6BD3B0F
+:105040008F3D81FC6F2E3566E177D7EE302ECC1F79
+:10505000A497E0FEA68CE1F272404F1866DFCB9772
+:10506000F1FA5BED7F3963E4F36CFF87EF7F6087D4
+:105070008F1DC3EDF025DC4FC2EDF0E07D4391C7FD
+:105080004ABB2E799D87CA63FE7748C05E2679ECBD
+:105090001A2351BDE4CEB9B16447BFBB2056320DCF
+:1050A0006D3F43B46B62F287B6AFE8716E9FE3A8C1
+:1050B00011ED1C8796FB491708F4BE99A2F7B99D1C
+:1050C00002E9E3EE4A9D1FEB2978F52EE07ED585B7
+:1050D0000E9D3F4C18D40F15FD71A0DC2E50B9A2C7
+:1050E0004F2A7A63AF93FB71178CE7E5B786B91641
+:1050F000E17C7DD81546F91326F17CC69C479300C8
+:105100005EF43D8111FFCBFAA442A7C1FAE6A5CE19
+:105110008C1BBED7B34DA64F85CF5283F843D9BF62
+:105120009AF339DDD7E1FE1D8BFBF77FAAF4F2E09D
+:105130007661FF7E08F16F461D12BE1FFF5BD1191D
+:10514000CA3EFF4AD60BFE5E59BFDE232588AF72EA
+:105150004E76B87DB54ED66F862B6FCEFF7AFCBCEF
+:10516000471EDFDF8A9F778EF9BF439F1DD00BF567
+:10517000A1C7794741C94FC6C0BC866B3D749E73B9
+:10518000B8F7CD1E95F555B07355747C3445AF41D5
+:10519000BBC85DC3FD03CDD1D2AFC97E39AEA5F783
+:1051A000571E92EF733E78D54C692DEAC9902ED9DF
+:1051B0007B92DED95D52A3C6BF197DB7F8FDAA3434
+:1051C0008AEB57B132F22B5575469BF1BC7F737C4D
+:1051D000FB31E42BDF6EADB43BB0FEC6D1727D2354
+:1051E000F7B7D544D3DF8F61417A40952758DF5711
+:1051F000EB0553643FD170FAC12FBAC3B85CE9D153
+:10520000129FD739F9DF55D07772B9E06E0823BF06
+:1052100009DA6B88D7670D821FDF3D5F29D7FB4C0A
+:10522000EC25FF13C5D3A0CAB9CEA72C0EB2DFD48C
+:10523000F1A395BB7E4B7233388E1473408E0B0DE9
+:10524000C48D26D2799095604FE29FBC724BD25D9F
+:1052500038FF801FF393DC71A8FC30977A3E22FB65
+:1052600073C9EB3CFE33247ED43C93C78FF0DD95AD
+:10527000107EC8A5238F1DC5BFA374B3B8515DC7E9
+:1052800049BA473244FF08D23BAE8D51FB19478AD9
+:10529000DC8F3BB25330A37F6AA43C8F7FB7319C35
+:1052A000F4EAE97FA88E4579A0ACD3F9B97C5ECF4A
+:1052B0007F70A504BF9BF807D11C06E3FAC507F56C
+:1052C000BF49E2B06494F0BBFA08B463CEFF6175E5
+:1052D00004CEEB2F20C5BF2FF1DA6931A43FD22BCA
+:1052E000CB2DD80FA30BC8BF2CFBA545D80F230788
+:1052F000FD39C1DF6D97BF6B063385FC98AFF3F8BE
+:105300007E73826B26C1CFA633FE1EA683FCCEFF22
+:1053100002748DFEA23C182CC69F7F1ACED661BCAB
+:10532000A839DEF536F1D1B31A09F908BEA73893CA
+:105330006FBF44FB234E19C6730AF4FC5D46EA0CAA
+:10534000D66BB4BC8E0960C7623C09B05980F1E6E7
+:105350003C39AE5310CE446CFF499D6B13BE97F998
+:1053600064B7685F4B4C608FC577BF83E34B828324
+:10537000C7C5953893121F1F2ECE24603F059CEEA3
+:10538000F8B91587807173259EC4BEE7A4205763C2
+:10539000B187CEF73F53C848AE7F8B719E25F92168
+:1053A000E24835C86324CFD571C54D39AF109DFE95
+:1053B000B5F1C43D63D8B71CFFE2F3138CF7F8E8EE
+:1053C0004B16B2B7BEFAEF51B4CF765EA6FDF042EF
+:1053D000BF41BE8FD0C7FDEC9D3AF22F5C00BB2DC4
+:1053E0003E609F3D9ACFDB3DD43995E8FF406F5931
+:1053F00004D63F2FE76F7C77C1FCD94897BD22BD0B
+:10540000078BE7E3D00E3BD02B4E40BDE55B5C97AE
+:10541000EF8F09B12EC6F0D0EF4CE4CB7C945FC087
+:10542000E963EA07DCFE72D7F3388A59960BEE720D
+:105430003DC9C163291641F19F5B43C5595EEFA782
+:105440007DA36A8540F71CBE719CA5A35BDEB78275
+:10545000FCD3E5D3496E0EE7B70E889BABCAB715F0
+:105460000C9C8723FF75548199C61DE3292CC1B379
+:1054700087CAF8BFC575B8736C083AFB16DB5F695D
+:10548000FF6EDB9F92F7DDB6BFE63B6E7F6DDE778A
+:105490001BE7DEF11DE37FF53B6EFFCC773C3FAFB2
+:1054A000E5FFFF73000370709C3FF85C4070BCDF49
+:1054B00070FC3E1F966D1036F777416A8C7AB542C4
+:1054C00000512D46EFA27708664DE271B08D65461A
+:1054D000FF0E61F07C80325F4B0BB91D61CEBFE8DF
+:1054E0008B85794E75F496C5A29F6C127F87FD82DD
+:1054F000FCCE2A13CDF4CE18D44CC0FBF1CD61A163
+:10550000E3AA61727BC3ED23CF1796DC31369EFE92
+:105510006C43C8FB1D2FC8FE47730723BF2413A588
+:105520008479D4AF9480FAD088233C3FAA8B397613
+:10553000105E52DA3CB207A534C46F8B1CEF8D9914
+:10554000999D86FEE818D00B311EF814C605298EE9
+:1055500065A67A4A7F1F8CE5FD6DD13181EE5BE552
+:10556000F2F34CACF9A02A9EF78EAEEBE36502C5D0
+:10557000F39623FEBFD274E5EF4C938918E637FF0C
+:105580008099E28C2726BD487F775689EFAD31F3AD
+:105590002A87D16E063CD61C1C47F4BBE4D0A4F786
+:1055A000F1E93377A6680F754F51F1179C96FD1DF1
+:1055B0008ABF40896BFD5EF6937C88FE17BA1F2276
+:1055C00051EA1DABF9B6F727EFD810FCBF45E0FE56
+:1055D00021DFAFB87F689CDE9E11786E72B33CAF5E
+:1055E000CBBA78DC42F1F7EC93C733EE116D97013B
+:1055F000F6D2714D63F4B8CF8F6B4A09C7B4C0E1DE
+:10560000D7E07DF0C5D5FB35CAFA85A2A3D6B1B2E5
+:105610001FA3A79FE27AFF1214E7FF602C3FBF3061
+:10562000AF90E3F101D82408AFC9121B517D1C7162
+:105630008B591B2A9E54057631E2B9AC99E3ADCC67
+:105640007755973415FB3973B4BF09D3A29AB4A91F
+:10565000E46FAFBDD884FA9BFBDAE563B793BF4C28
+:105660002FA13D714F9FDAEFB60AA3A5F18427FD64
+:105670009D5ADF0C91ECE3713344A29F98AA30B29B
+:105680005F63744C6B42782ED78B8ACAE3A622CC18
+:105690001644933E58D42345DF973FE8078B995132
+:1056A0001F8FF374B3F8AAE24FBB35CCF11AAEE703
+:1056B0005F1B5F5DF9CEBB74AE541997322F4A9CC5
+:1056C00074B8F8AA72CEC15D7E45752EC32DF64F13
+:1056D00047FFE3B88367F4F2394B33FE1D6125FEC3
+:1056E0003AEEF58B147755E2AC6ECF45D2ABE13B89
+:1056F0003D7E3F0E963F2106DF17E2F1D757F19E20
+:10570000941EEFFF99E9BED41BF2FDC54E183FE68B
+:10571000BFE9CDA1B4CB6BA7F490B7985277E7451A
+:105720008AD77E38561DEF53E27997B4CE3363D5CE
+:10573000E723090E8EF769C3B9BFC6DDA3A3BF97E0
+:10574000E17EC748F2BBA47319DDEBFAF2A46B2427
+:10575000E25D87F1B600BA38EFB087E13B61E79DC3
+:10576000F6308CB38DEB3EA7C7F32F7562AF1EFDED
+:10577000618071121E4D741FB8C8CFF77696D0DFC6
+:10578000E3BA695CACE36F1317FB9FE541012100AD
+:10579000800000001F8B08000000000000FFB5170C
+:1057A0005D4C5367F47CB7B7E596DF0B2A3F227256
+:1057B000C16298A2DCC240A7311674AC135C8A4A5D
+:1057C0000201B5662E92092DD9CCC2CBD23A8901FD
+:1057D000DDC3B2B864F3A92683E8B687FA93AD6E49
+:1057E000550B0B84252EE2C39C71C9520D3333BA7D
+:1057F0008162DCD85CD839DFBDB5BDD8BD2CDAA458
+:10580000393D3FDF39DFF9FF0A003007DAE756B9E3
+:1058100006E74CF8A5CFC6FF0F3DA44F8CE3DDBDD6
+:105820004BEB2617C4F1BB3EC9356903F85D9CCE2E
+:10583000942B00F687CE5A1C041FCFAC7621FCEDCA
+:10584000C2DFB54A3A80F7D24C2D20EEFD66A6960F
+:10585000F8DEAFD27A02E94FDB7BD78E975E047019
+:1058600096416B10F9552EC17182E0B8C3FA4645D6
+:105870005C6EC02538E9FC80AD349BE8C75CA5D9D7
+:105880007B13F4F539456700E939AFDAAC89F409DF
+:10589000BB19A006E90C5CC124F66B5581DBDF7FE8
+:1058A000D22A4F4A7A1CF1DB1DCC36E0DE50813C17
+:1058B000591EC7F7D38F02FC6E6622D40274E9B971
+:1058C000B86472D7AAA8AF3B3F6A8152A24C5B5C16
+:1058D000AB305EDF4BFDAC1260F8FCBEE268051732
+:1058E000952017A04D3F37E0DC5B9CB110C07F3D99
+:1058F00005CA98461391DF4A3F148E2A22DA69A717
+:105900005F78E5B6FCF7274CAB11BACDFE68C2BD97
+:10591000DA9D82C39AC9ED2E6DCE207931CE2F212A
+:10592000A5D34BB7AD22CC5128E413F417C25A02C9
+:10593000D2A8AD366EEF06047EB0A17C9B5388A43E
+:10594000A09DD6704A04506F955304DF8B087BCD21
+:105950008112467CF126E72B6F3611BF4FAE2A0429
+:10596000F4E3E7CB16794109BFDF6434218EAAF353
+:10597000D3FE523CAF763195DC6AEF34F2F19341BD
+:105980007EEED6E3B23334FC7221F75F36019ECB54
+:105990001D03388E7677F618CFED6E75DE61743F95
+:1059A000F8A07F33CA814D900789DE6B94A33A3B00
+:1059B0008DF11F007026D64337D5410D41C6E1E772
+:1059C000E813D54515062A58113F37BF7E4674F9AE
+:1059D000F9FA62F00CF117517D560DD828BF4D022F
+:1059E0009401E1F5922D419F5F15B99E0F6501FC71
+:1059F00028D717DE3EC8307E7D8F5F915A506E4AA1
+:105A0000AE97CAD2E3B8F732D6531640F5F06C031E
+:105A1000C5FB589881154D79F3F1BE28577DB16EBD
+:105A20009CAD4EBCA7E6DF31CCF9443AD5819A0D46
+:105A30009A5F2061BCFC17586010ED55353D1C493C
+:105A4000A3F8B9B2D53285ECD80EA523EE6D126B52
+:105A500018E12E3C40F80E1690F0E7F62B9D5B0007
+:105A6000ED54B7D8AF52DC5B3ACCAA1588DEDA40E9
+:105A7000F46B5950372912FFC47BA9C42F67AA556C
+:105A800021BEB39EF88D5F4444AAE7AD14A56578A6
+:105A9000B7CB288D7DB3C1EA0E501F5537A311F443
+:105AA0006F47873540FEB5849BCD90CEEB41A0BEBD
+:105AB0007B5BCFEDB7458F32A3489F095767915F56
+:105AC0000BCCD316156135EA2EC84178E1BE05B07E
+:105AD0001FBCE2B44546B9733E4CAC05E04B9FC4D5
+:105AE00061C827836339C0D7BE7C0EC33E85D32FE0
+:105AF000FACA398CF8540E477C6B35A8CA3C9E957F
+:105B0000E1FB02DD27A75970259B6F7EBD3E62F940
+:105B1000AA0BEF29A67B3EBAEA2E9693C8C7205A55
+:105B20002C14D66AFDC930675EE7C306B2E381E88C
+:105B3000613AA760BE610D46218430EFBFEB6FAACA
+:105B4000529B6FD902B893F167F4FA048722D03CD4
+:105B50007A4BD2FA7F78C55F3C9E5248B9B21EF3A9
+:105B6000E61937410AD28FD46B737FBE9EEB184F74
+:105B7000C0B8DDC078129CCF6FB5F8CB281FAD74CC
+:105B80008F24E7A7F4FAC40A30BB32B49C32BC4F6E
+:105B9000476C0E6020B2308F1D211649C53EDF19BB
+:105BA000DE744724D8C3E096717E3CD77DD8E646A4
+:105BB000A589F3B6338D26F9135C4AD5E22C593406
+:105BC000D86FD5F65A935D8B730C6EB56B75719467
+:105BD0009A05EBFBE879163888FDE7A918BB4E73E8
+:105BE0002CCF01D08BC3C7939F1E31D13C0F99EFAF
+:105BF0003D99E3D81F798A0C1D3994370C26F6415C
+:105C0000817E0724C06D9463911C616E25CA2D1995
+:105C10009F257D9FD8156E2F77579001BA5004FEAF
+:105C200083345F462D50771AED779D637090FA3B71
+:105C3000E00205F7FDE8F11B874F21DD738EC9B443
+:105C40008EBA8357F99EEF162778FF78C2772DBC5E
+:105C50001E8337357A88390249F23A40FB1DED6ED2
+:105C6000467F686E741F300552D06EC339ADAFBD2C
+:105C70000E4B40417CACE81D91F09DE719E4D11C2E
+:105C8000532616A511FF80190225DCAFA6BA84FDA4
+:105C9000845F85FC8EEDCFD8FEF1C0F45821D56B22
+:105CA0002753230ADF3FB78CFB052F921BDF2FED15
+:105CB000A16133CD1BDC4306B9DD8E863B343F71D9
+:105CC000CF18E94B0EDFE7F98028AF53DC2F067EB3
+:105CD0008D3D63E16D2C095809157338CF3655CACF
+:105CE0003CDFAD6EC6DC181F497075919F7091C97D
+:105CF000346FE7C7ABD1AEF541A39F412FE677C81C
+:105D0000A2D5C7D03A16F0A37C23A294F7A18B7B2F
+:105D1000FC0CFD1CAA62AA40F120218CC7163D3E56
+:105D20002F801F6E4BFCA9706CAE1AE035AC612B56
+:105D3000D653A35E0F00016EA7F9E3D408BD238EEE
+:105D40009A83F92A7F97F8F97D6755E0FCD414E827
+:105D500049D6AF6BEC75B36A0DC93DF3F7D32E7B13
+:105D600092F7D347F876223B7BED4C24BF30BE2B15
+:105D7000A9BFEF155DCB1C41F481C9B58FCE755914
+:105D800022ABA9BE1F98DC1C8FF191EEA1FD828B86
+:105D9000EF16F591008CCF8723E567CC949776A218
+:105DA000C7EE5B1297E3B8E969FCA10ACFDAEFA16D
+:105DB000CA9AA7FD7E86FA17ABCF577F6EB2BC1D7D
+:105DC000A2F997A47E7ED2E71FC01299F7CB933831
+:105DD00083B68764E0753CAAEFF57EA6FC487BC8D5
+:105DE000FF9D190695F85CEDCFD0F47FA6EB8BC133
+:105DF000511DF69B35B9F9F627F439FC8BC9718A28
+:105E0000EEBDF2A4004A82DFAB82A9A024F85D199E
+:105E1000CA31E0F6C862837CF578A9815F33B1C2EC
+:105E2000C05F73BDCA80BF145D67905FFF6BBD012B
+:105E3000DF30BDC520BFF1CF6D063CD6BF7558B968
+:105E400089E73649AF1BE40A3B8D7E15F518FD2A1C
+:105E5000EE35FA15D35BE237FAB7ACDFE85F4EF602
+:105E6000835C85DEA1FFFC9149FB60203CC3F334D9
+:105E7000359D02133447C4A8B61FC266BE17A6F0EC
+:105E8000FFE2A2843C2CA7D73FDA19092FB3D2B97D
+:105E90000F9D362BBDDB2E510D603EFE05D7762EB5
+:105EA00017E00E00000000000000000000000000ED
+:105EB0001F8B08000000000000FFE3E36660F8515C
+:105EC0000FC1D3B81818367221F84301B7334368AD
+:105ED0003E16060601207EC7C8C0F09E91043338E6
+:105EE00010EC7E20BB0A88277150CF7D43112FE52F
+:105EF000A19F5D5FA0763D1518787F83B083100366
+:105F0000839B300383B40884BF5F0455DE5108C10E
+:105F10007E2E41995D9F81FA018DEBBB318003009C
+:105F200000000000000000001F8B080000000000BF
+:105F300000FFE57D0B7C54D5B5F73E731E33939976
+:105F40004C260F4242004F08202A842140088838FE
+:105F50000990068D9A080888CA000142483211A9A2
+:105F6000975E6D672214D16A1B2D6DA397DA0141EC
+:105F7000A3450D18E840031D4C41BC5A8D0A4A5BED
+:105F8000B541313C0A4978E8C5D65BEF5E6BEF332B
+:105F900099736642A2B6DFFDBEDF177FFE36FBECCB
+:105FA00073F65E7BADFF5A7BEDB51F2359C613D345
+:105FB00015847C057FD71372482484F4EB4E3B0B89
+:105FC000683A8E107F8E39B0552024B4EFEFED245F
+:105FD0008590B34DB355732621FBC79843D7D3F2B1
+:105FE000B381FC8099964FDD79C421D17CD54E5187
+:105FF0008272D33E2B7EDFB1510840DE6B6EFDF125
+:10600000B534DFB553249B69D5246437915442DA03
+:106010002D84FDA9F1985F6A65D9AA4DFBEF82F640
+:10602000CA836662A5DFB737896EC8AFDC2A040869
+:106030006DAF6AF783CA005ADFB280D06855697EB7
+:10604000EB638A1A4FC803FBFEEC68B31372DA677E
+:1060500021AA82FD286F1C494845607BE100FA7D3A
+:10606000C536C165A2F5576C3CD701F45534C9C398
+:10607000445ADF8A061B5147B0B6BF22D05ECB0719
+:10608000D8DE4E7928B457FEE53D0A11A19FB21B18
+:10609000BEABA27440BFB5764FFBEAB13D8D9F55B4
+:1060A000CFD1F6E87BD52F0A2EE862B58978808EAD
+:1060B0008EDDD6B94FDBA17FB5CAF0F8C87E2CDCE7
+:1060C00005FDA8086C520AED40DF2665E9C8EEFA26
+:1060D0005634FC879EBEFAACFE9E8872637ADA471D
+:1060E000593ABC3B5F4188BB91D64BA480523AAA37
+:1060F000FBF907422221E3A17E91A896EEFAA9E4DA
+:106100001107FE23F49F940FFEBDF181AD99DD725E
+:106110005BE9049975CBEDBC93CB51EACA8DAC5FBA
+:106120004B7F0CF2A0F4D4F99C983EEE4BC37483E1
+:106130004F45BEFDDC3702D37A9F0B9F3FE9CBC3AF
+:1061400074A3CF8DE953BE224C03BE127C6FB36F94
+:106150002EA65B7C1E7CFE8CAF1CD3065F0D3E7FA3
+:10616000DEB71AD36D3E3F3E7FD1B71ED3465F1DCB
+:10617000A63B405E346DF205F0BD5DBE064C83BEAD
+:10618000467CBEC717C4F411CE47C764922F513E58
+:1061900038DCC449C54E928ADDF932CD2795B07CF2
+:1061A000EA1DFE7C85E6533D344FF932A032946FF0
+:1061B000A6F90135AC7CF0FDA4C042F383FDAC7CB4
+:1061C000C823EE022BCD0FA963E5C337FA0BE268B3
+:1061D0007E7880955FBD2D5460A3F9AB1B5979760D
+:1061E00033996AA7F9EC10CBE7BCE19E1A4FF3395B
+:1061F000AD2C9FFB817FAA83E673DBD8F793CE0497
+:1062000044D51E2D871DB2BA9850596DF4CF704BEE
+:1062100013695E51EF212ECA1FFFAD6E299DF24317
+:10622000766379C83F1FCB9B143796BFE32FC3FC1F
+:106230002ED983E5C7FD552CAF78B0FC73FFBD9810
+:106240000FCA7E2CB7D4FA585EF163F980DAF5589C
+:10625000FF1E3980E5236B1FC3F23D4A00CB1F5F51
+:10626000FBA47B1ACDAF113C3F073CD2B49C640128
+:106270009E1AD34A289ED609642EE0F707003A8A70
+:10628000CB75E90AEAE18E3FE43E0DFA8B7F299057
+:106290005FFACCC399F8FDAFB01E99D623F65E4FD6
+:1062A000CE9B79BA7A72DE2CD7EA6980F7D658FB92
+:1062B00056CF8E3727E9E979B342AB673BD213DF7C
+:1062C000B77EE5BC35594FCF5B955A3D7B909EC458
+:1062D000BED1D37444CF9FA62361FEB4203DFDFA06
+:1062E00046CFB8F7F4FC19F75E983F6F603DE97D43
+:1062F000ABA7E93D3D7F9ADE0BF3E708F66B50DF75
+:10630000FA35EE7D3D7FC6BD1FE6CF47484F66DFBD
+:10631000EAD9F5A19E3FBB3E0CF3E704D633AC6F40
+:10632000FDCAFD48CF9FDC8FC2FCE9C27AAEEA5BB2
+:106330003DBB3ED2F367D74761FE7C81F58CEA5BBB
+:10634000BF72FFA2E74FEE5FC2FC310950CF98BE8B
+:10635000D113FC54CF9FE0A761FED8B09EF17DA37E
+:1063600027AF5DCF9FBCF6307F520490FBC4BED5F3
+:10637000136CD7F327D81EE6CF20ACE7BABEF52BB7
+:10638000EF849E3F7927C2FC198EFDCAA77A0FF4CD
+:10639000105A4F7CCFF5EC39ABE7CF9EB361FE8C42
+:1063A000C67AA6D37AB27AAF6752879E3F933AC233
+:1063B000FCC9C37A66F4AD9E3D1D7AFEECE908F394
+:1063C000271FF97353DFFA35A953CF9F499D8C3F9F
+:1063D000630FD74C75D0723A16BA44FAC9B567DC68
+:1063E0006E81E64527CB8B4E1701BF44D4FC0DD2FE
+:1063F000EA16E9F7F66D89390F9348BFA3A014FA9E
+:10640000154FBDB148BF23212F4EE7E724BA93743F
+:10641000F9E4A201BAF7FB950CD195F79F7BB5AED5
+:106420003CDD93A3CB67944FD2BD3FA8A64097BF56
+:1064300062F50DBAF733FDB7EAF259EB6FD7BD3FFE
+:10644000AC6E91AEFCCAFA0A5DF9558195BAFC357D
+:106450000DFFAE7B7F54E303BAF2D1C18775E563CC
+:10646000428FEBF2630F3DA97B7F7CEB665DF98485
+:10647000A3CFEBCA27B6EDD0E5AF3DB9C7E0E7D96A
+:106480009DEDD7F0BC08B827CCEF4F57D0DF0BC538
+:106490002B985706D8D18FDF1FBF543D4EE5ABBCBC
+:1064A000B2584DA1F20599123AAEE70F28BFB28D4E
+:1064B0003EBF7792E74A277D7EAFE219ED8CE19FE0
+:1064C000523C08240D52D504A9B1FC4199E1B120F8
+:1064D000E3CBE1C7E8F75E53D7F0449AEF2FE6D756
+:1064E000035E9E124C88D33891D4C07B716682F3D0
+:1064F000820733739FF647E075FD20AA874277BD78
+:10650000EB654F1AF8199B6BDFF6831FB26E10ED27
+:10651000D700429E16DE0EF987D2EF072D4DF3D03D
+:10652000FACC0AF5D323DB5768FB23B1FD0668FFDD
+:10653000C51EDA370FC9D3B56F195CAE6BDFA2D0B9
+:10654000F69DD41FA8FD236F9F0A6112212F0B7F98
+:10655000C4F6CD83CBB1FD07153A5F896C3F2EDCC5
+:106560007E10F4771FB43F3E46FF874CD2F77F7012
+:1065700085BEFF0AEBFF2BB5C778FB71D8FF16E18C
+:1065800018EBFFE00AD67F33AB37DCBE23CCFF43EA
+:10659000D0FF377BEA7FD6647DFFAFA8D4F7DFCC8E
+:1065A000DA7FA7F6146FDF8EEDBF2B9C62FDBFA2D2
+:1065B00012DB57CC1E17E047C988AB09D0F6C9409B
+:1065C0006A98FA035C683B908E48A2A026E4516169
+:1065D00008D2716F1CC3DBE771146F686FFCF89C05
+:1065E00004A865CBA5F32E8EF515DBF215B04B583C
+:1065F0004EE72B4B38A9654111F14D369803C3285E
+:10660000BD1D41D10FF9B20DD705C0FE79CD644152
+:10661000097C2791103CFFF467A33647F6CB982EF0
+:10662000A993DBDB22F42D3C8F2A20236A287DD31B
+:106630000104E3BBF31FD37910A1F38B0FE83C8374
+:1066400050487E22B3F63EA2F325C8B7D1F9129482
+:1066500013528BDFD1EA0EA751FA4B38FD1F4B4C7A
+:106660005F3FBE4308F8A97E7EFEBD31384F5DB066
+:10667000DA4699DE4DC7427FB22E4FFBE5073975EA
+:10668000ED3607360BC85F15F8558AAA49C8E2F5FA
+:106690001994D7DDEFBF4FC59E4E597F1B71CBFDBF
+:1066A000E9FB77AE12063969BBB3DDE61C364EB89E
+:1066B000334CA8D724C39447C8AD4D63645A03290B
+:1066C00075CB1FB745B43BB3489F9F5DA2CF77C83A
+:1066D0006ED944E9EA2815C8265AEF9CB9FA72AD7A
+:1066E0001DBB2989C999B75792CAE89B03690E3C1B
+:1066F00076A29CE73AD9B71A3DDEC5329DC2823CEC
+:10670000FDFD08C8D59F82EFDDEE64FD36D23B5714
+:10671000B6B84B683FE72E1403806F23FD7FDA671E
+:10672000739BB269BAFEA7323145F7C748FF3C8F69
+:10673000B13F8D328CC3F3CB8DCF196EDAB9FC3FEC
+:10674000067CD0F404E083D27F9CE3A3DBAE327CF2
+:1067500078CD9E9B010F5D4F8804E5CAF1721BC77F
+:10676000CB923A3D2E08F1C820C76573859C8723DC
+:10677000703087E36059BD1E377712BF9C1E432ED1
+:10678000F3366CFA619A1ADDBF0F396EE63FB21F1D
+:10679000F913DD4F26A7BBB89CEEACD197DFC6E559
+:1067A0007A2797EBDCFAC70E50F3416E570332E8B5
+:1067B000BBF73E4D9E6D3A797AB83C8D74DEC5E5E7
+:1067C00079D7F7983C8DF4B67179B6D55F90C990BA
+:1067D000687A8DF42D581DD51F05E4B9D01F5B9E36
+:1067E000DE607EF2F188E7558D33928F47E8D98AD3
+:1067F00086525D7E79609EEEFD65F50B75E54BEA90
+:1068000096EBCA17AFBF5B975FE8FF9EEEFD05AB47
+:106810006B75E577D63CA42B9F5FFE982E3FCFF398
+:1068200084EEFD397337E9CA67973CA72B9F59B4AB
+:106830005D972F75EFD6BD6FDA77D52D80CF378E68
+:106840008804FC89CF5C27302EF8994B76C13BC772
+:106850007D2AE2BADD3702D3933E17E2FEB42F0F52
+:10686000D38E608B1DC6093A2E2E2589D4CC9B6E03
+:10687000AE5D3F10C66982E3E916D3AC5AFF6442AD
+:106880007E6D5291DFC5F50A098D254480C186D3FE
+:10689000D1254694B7F5525E4F0D7F727479715BC6
+:1068A000ECE7DEC7175EE18C1177E9D65392017EE3
+:1068B0004F27F7BB8DE5950229897C4EC803A8D7E1
+:1068C000E7F8B85BA930FDAFDC915E401C900F0D7E
+:1068D000AFB95C7B8D14E4FD0127593A3D5E567FCC
+:1068E0008DCEBE1388CAF603BC8DD53D5FD170AD89
+:1068F000EEBB33FB45A4BB1A6CC54418164B5E3780
+:10690000811D0EB50C9E390AE874BF6182712AD8C8
+:106910000FFDC233BEA2E4E312C8AF04D393BEB9E5
+:1069200098B6FB3C981EF79563FAB1AF06D336DFF5
+:106930006A4C3FF2F931FDC0B71ED33FF9EA303D52
+:10694000EAABC7F43D5F00D3C3BE064CDFF135624E
+:10695000DAEA0B62DAE17363AAE95D6FB83BC9C793
+:10696000E1D380BF1838EB786055EDFAC9DD383BCC
+:106970006FBAAFD63FB09BCFC5F5668E87541D1E4C
+:10698000BE806033E2AC97F27A99E3B0A7EF6397E9
+:106990007B37FF6BF036DEC4FCCC6F8AB76E3C658C
+:1069A00018F094D51B9EFA89E3BBF134DEE4647ED3
+:1069B0000FC7D38FA01F31E61505E084F48BF0D705
+:1069C000DC3616A7E6EB09D45365716ADEF61AFACF
+:1069D0006E2BFA758111306E9C1FF1B7E110873F65
+:1069E0007FD44C277D3DF7CF88939EF9EEC6F9CD35
+:1069F000D2001DBCC646975BE3185FAD265244E843
+:106A0000B8F6D0B0675C8B46625E2249F07DC05517
+:106A10001A1FA35EEA2B037F7BE3EB9AF8CFB3A1A7
+:106A2000BEF627FF9E0BE97813F397E35A44F4DB95
+:106A300049E86917F0373C2E995D6910DFEE1AA618
+:106A400038D16F08D8F5FCF3D37C6E37FF1EA23C1B
+:106A50006AC571B72E0DF937F4F3E1E97DE05F6F98
+:106A6000F6BD377E2E0A0CF897F0B337FBD89B5D46
+:106A7000246EF5C520ED7FE7BE51390FAB60078767
+:106A8000B0795A0FFCD6D6A58CF47CFF6BE2B833F4
+:106A900055C371EB6042DBF988EBCBF9A62B1340B1
+:106AA0002EB41E9C1F74EDE47E7E2F723D9BA9AF19
+:106AB000CF6BAC2F4121C268DA6EBCA29004426A4F
+:106AC00044CFA322CE6F5C6D7E881BECB3B9D6A8F1
+:106AD000306F3CFD6648851AF5F185F3879E76C0D8
+:106AE0003C6C659AC9793C861CB5B4AA31D3698FD0
+:106AF0009CAF04F5F9F375425123CEE7D48459A332
+:106B0000609C713A8F0F05BB9F86A956CFCA34C5CA
+:106B1000799CDADDD30D59096CFE1760F6645B22AF
+:106B2000DA9BD33E0BBEFFCFA6A7A77A347A0869BB
+:106B3000229F58C09ED3B2AC9EDFEF511FA48B0A98
+:106B4000C43749B3FC39CC37ADF4FFAF8640BD1232
+:106B5000E6B57ABD8DA2DF3C1A9E6FD3B547BF5311
+:106B6000B5B557F8AE67BD9348BB867B2ABF57F9CA
+:106B7000FAF08A06AB53EFC726EAF2DE60BA53E7B3
+:106B8000D7C23FC071AF1124C05F25875FA7645F84
+:106B90000F78DA0CC14398BF08ECBD2A4B9BE25139
+:106BA000515D5A019F8BF234FCAB73FE4CEDD4A9BE
+:106BB000D765027A46BEA454E5F2A920E2CD444C42
+:106BC00034BF98BFBDA86945318C5BA74C6CFE50A3
+:106BD000464A1C303F2E2775B9104F3D4B4C45A0FF
+:106BE0009F67C93B8EB111FA784E54B0D2C5EBF510
+:106BF0007E3C9DDFEBF2CBEAF5F9A5E4D6545807CD
+:106C00005FBA41260101EC86BEFC98E8C47A9791F0
+:106C10009A75306EFF9CC7BB1639899441E9ABFA6F
+:106C2000CD2F7317523A2E896CFCD5D67197273128
+:106C3000FA2B660514377DFF93A6B1B7510B44BFFD
+:106C40000FAC83756D7F29716D25D1F2FBBAF41BF2
+:106C5000E9D5FC81A8F5644E474A83E00EC4B063D1
+:106C60008A24303DE3F6EE6AC9A98B83E4423E22D2
+:106C70000EF28DF194427478DA2C7A064BE3197E89
+:106C8000000F82D4A578BE4DFD6951F55F2DF5FB4F
+:106C900027D63F90D69FABAB3FF79F4AFFD028FA4D
+:106CA0000B62D55FF59B1776F9A93DA978E9670EC8
+:106CB00042C7C953525DAA8BCAB572EB0F1D6E9ABB
+:106CC0009E94FC0EC0EBA98058144BDEABC3F27649
+:106CD000DB0588BBC13F69FDA79FFF11C6233EDFCF
+:106CE0002A3B319ED6600E99A93E56372D2F26D9C4
+:106CF000983FC6F20F9E13211FD4E3AFE2D99FA5A0
+:106D0000C2FE0A8A141E5F0AA13F5BBDE5D3421C86
+:106D10009F4817EA91F13B68FF5212DABF854A4259
+:106D20007439A513E3045ECE176FD38FCE890EF8A6
+:106D3000571BCEDF8DEF9773FF74B9149FD26EA3EC
+:106D4000FF9E4026803DD4F84102CC3F5DF3DC2F0E
+:106D5000B28F517ACE6C79DD2144F049D3A3F38D03
+:106D60008B7FB547EDD9DE76503D8BF483B4F14A85
+:106D70000D72BFBA99A59572C8712DD5FBCA4DB2D7
+:106D8000CB4F1F57BEF0F4334F421CF38F66D73002
+:106D90005AFF8A170EBC3789E6576C97538A5937C2
+:106DA000EC426AB75CBCF4FFD539DD72A878F98093
+:106DB000A28E62CFEF4FEA96C78AEDFB15322A9A70
+:106DC0001F531BF72B6DF61872693C56087EC29A4A
+:106DD000E7FE4B81F8E2A97D02E99F19839F9B0E94
+:106DE000A01F007C4239723985E56678DF4BE502E9
+:106DF000F65A9393B1FC466E4FA03E7524E2F9C556
+:106E00003DB4FDF23F995DD0FFF217EF71403F4E68
+:106E100048350CD7BFFC612AD8AF72D99FEAC49419
+:106E20003D2F7FEABB88B7656F7F3715E349C49D67
+:106E30006EC2B1C79F0EFD5BB27136F66F29F120AD
+:106E4000EECA7F29960468FA99448AB6C7D08B0E99
+:106E5000AE17273653478CF6EF04CC1FC15EBF2315
+:106E6000E2BE2A42EE26A0FFDFE57DA11E02E63F3C
+:106E7000B330391D904C5CAFA8B71989D72D0FB628
+:106E8000827C4E0F72F78775162F91FC9C1FC2579C
+:106E9000B45EF1EDE9FD997C882AE5F2EFE8383F30
+:106EA000159EC3FBADB2DB9AADFB8E7C95D9DDFEA2
+:106EB0002ADE3EA53B0EC6E713A9B1FDD501B2A659
+:106EC000F7749C8EC057847E337DDFF210D36F4DF4
+:106ED000DF03A545507EF130D31FF80EC63F4A5759
+:106EE000A83F96EF9F25A03DA0F3E6587ABD45E662
+:106EF0007AAD2FD77042E996848408BC40FD49C81A
+:106F00007F5C5F59BA817E17612FBDD09E23BA3E48
+:106F10004D6F9771FD3F05FA7F4DB7FE938D4CEF96
+:106F20007BF69FFC2C6E23079E7912F495EAA75FEF
+:106F3000057D954BA0DF7FDDD6F2DEED544FFFDA05
+:106F4000A8E9A9DE7E1AF5B47CC778124B4FFF6A18
+:106F50007791987A4A9FC7D4537B1BE2F8FF94FD40
+:106F6000D4F89728EBF9A7D9C39EF868B4872F4ABD
+:106F70002AF2D3680FE9DF61921B8D3F0D771ADE8D
+:106F80002A7E5D7505D89D302E35DC8571A9E12EF0
+:106F90002A7EABE39FB1FCCF106BA274CDB7D44F68
+:106FA000817984A58BE0BC2B7F9688EBA6968B0419
+:106FB000F5BE80C8B86FF07D53CD78F043A7FCFDD7
+:106FC000B6B3F7527AE713BFCCD6E5EB64F4EBBF68
+:106FD000FCEAABC9B43FB773FECEA7ECBE89CA6367
+:106FE000AE2484E2289DF324E24F4882F8AC403E70
+:106FF0008EA0637EB93E0F7F5352BBEBE9EDFDAF30
+:107000003B0FF9A6E9DB3EB676F52EA443B179290C
+:10701000124FA52057CA3FEF38213004ED529B5440
+:107020001231AF7A9CDB9DB7A7CD1C0FFE4BFE9CA7
+:1070300051090CE783717EEBE5F6EBBC5F4D00BBBD
+:107040007EBE390BE7AFE70F2D8E8FB56FB285E3AC
+:10705000EC005F57E9B40B7522C57D27E942FFC5F7
+:107060006FB792AD31D6FDBE2F9BF8E483CB8DFE7A
+:1070700089546E73390EE7D14F137222E436EBA6B2
+:107080005392235A0EF0F771C43CEBDBF217700DEC
+:10709000FC6DB1B61596C488D7FD84F36FCA2B5F1B
+:1070A000E0FED569CDF912F0719A5DD4C5391ED4D0
+:1070B000F475241909744D7965F9A3E3298EBD8708
+:1070C0004417EC57F5369F533C31E6BB467E42FDF4
+:1070D000E0471E909DC8AF2372C912E0EB91D956CC
+:1070E00002EB96EF2AAEAA58744E37B378C83C52DA
+:1070F000F2D938E1FF3EFEE6CF890F15507E9CB7EE
+:10710000B3FDC0D1F8637A7FDE29046A05C0A1C847
+:10711000F2294200E26485C4F3E86401F5FDFA480F
+:10712000FB951F2C7D01F6D554370B4E132DAF96D2
+:10713000DA14C0B137B85D02FFFC4695B831DE20E5
+:10714000D58C9A1511D73A204BC8AF96BFDD7E2754
+:10715000F0F7C22C3301BADC23CF3960DCBFD03C5E
+:1071600016F5A0A77EFDC147A64C93A01E82F8305D
+:10717000E2A130C5A6CBCF9E4A06BAA8DCA698DB12
+:10718000EE71C590DF3285E1ACCFF6CDF2FF997D8F
+:107190009B4CED1BC3B51C69DF462B51F6AD7F2C14
+:1071A000FBB6B256ED0FB858B937AB3FC875E56BB3
+:1071B0004BFAC5B26FAFFAD8FCFD35BE0FBB7320DA
+:1071C000B56FA323ECDB406ADF62C46DD315CDFF3E
+:1071D000ECC5BE59FE77F4EF55B06F31FA3B52D192
+:1071E000DBB7A2E65AB46F450345DD7EA82C85CFF8
+:1071F000E77AB46F0B7F361BF3B2CB16033FC05751
+:10720000B06FAF713B07ED809D5BA438B1FDBEDA76
+:10721000B9D2BEDAB9FF253E6B766EE520769E23A5
+:107220001A87CCCEADCC64766EE55E66E7560E630B
+:1072300076CE68DF0AA2EC1BFBBE7A04FD1EE78B4C
+:1072400099BFB8839617CF955D16FA7EB1AA9D5F58
+:10725000A8191F69EF162912F239CADEB9CEE13931
+:1072600090DEECDD5B60EF86A21D1B0A7A64C4C76A
+:107270000D436DBAFD7247BE68FFF54BA02F7F101E
+:10728000719EFDBE89CD8BF67DD13E16F46E37A77B
+:10729000E75185C9B3C3E7477B3A7524D3F7AA43BF
+:1072A00071384E543709ACBFF70B0115C681BF5D6D
+:1072B000C2F9F29D7BD97C798E99F183FC9BC8CE73
+:1072C0005D50162C8CC0C3DC4B1518D79C2B110BB2
+:1072D000F8AF0B0EDD700AFCD60597D6A3BFBB0036
+:1072E0009EC3BE89ED6DEB3268BB772E1770DEA1B1
+:1072F000EDEF9817B6977A3F767E73EC7D1A533888
+:107300003D53EE1302B02FA7B77D102F72FD9B23C4
+:10731000B621BFC85B62CCF8A4F65E984F2EC69724
+:10732000AA55CC6F0EF389F24D15A2F944255DBC28
+:1073300030B59B2F77EEA4FD4DE9B9BF1ADFA2F758
+:10734000E1B8713EB380BFD7131F343E47F59FF3BA
+:107350009DFAA9B89FC7C88F46CDCE5C4346815ED3
+:10736000BE6FF23C3A1E70F49F942F94CEDBE60D74
+:10737000D39DE7D9C5F97293E7D8B45415F8486A94
+:107380000067B7976F3F904AFB778B3B330742E626
+:10739000B3FFA67820FED062ED423BA8E130CDCC11
+:1073A00070F8578EC323039CD370BC090A4ED4AF28
+:1073B00090C1CEF17D645ECA67D05F6F908F4F142D
+:1073C0009FA09F85DA780572A1FFBCA999C9C55B0A
+:1073D00023A05C6E265D0781EFD529822B44AB2A62
+:1073E0000C6EFF21ECB77AD54A9F839E970BAECDEA
+:1073F0008C1DF6F4D498389662E1183709468C9BB8
+:107400000BE0BD24D8B768C6F6EFFC1EB347463F75
+:10741000658AB9F508D033E5DF64B2091E06E87F56
+:10742000113830FA31517AF035F7FDA472FBFD2A9C
+:10743000C8C10EFCEE52C01FF286D8F8A3957B257A
+:10744000751AF24D9343908E2FE3981C60A9DFC804
+:10745000E75BB43CE01FDE6F1664F87E06954F32A2
+:107460002D9A6AFAE2A08677B31ACD2F8827A4470F
+:10747000D80DB06F91EB96D5C1B7914F37ACA2EE56
+:10748000991ACD274D3E60072FC7AF28FD09EE8F13
+:10749000B97FEA9BEA4F9A59AF3FFBAC5DAF8F864D
+:1074A00038DA5E01ED0A694ED4C50FF2CC6C5ED6B7
+:1074B00062F520CEBB5E935D9BD568FB7315970B81
+:1074C000CC5722CFEF4D850EC1BAB1D34A3ED1FA87
+:1074D0003D84E12C723C78D5EA41F9F554FF045E15
+:1074E0007F4FFE9896FF0EB407FB16557D7BC6F1C5
+:1074F000488B27F5D6AF6966663FBE69BFB476BED6
+:10750000EEBA8397B462FC4D5B7FD82C7A7E2EC393
+:10751000FCB848D0AD7350CA71FDF29F50FF58E5DA
+:1075200032F543FC2844F9FCEAB6A7315E7DF6F952
+:10753000633783FEACF8AD482C549F3AB6C5931020
+:10754000DB07A2809F50D124E27A169142B93323FF
+:10755000FC0C42D6307EBC148F76A7628739504C23
+:10756000BFAFD8F54936C4DD3A1E60F6CFFF3CC741
+:10757000A3BF2D1BD6FB2B24B68E6F94CFBD1C9FB3
+:107580006776DBE682FD161AD879D78AC639B23912
+:1075900022CE506596595C7BB70DF759FB9F13704F
+:1075A0009F32D01779CE52DBFF79E63966972B826E
+:1075B0007200CECD56346CEF803878C55133FAAFB7
+:1075C000DE86730AF8A7535F7A01FD236F50D4C596
+:1075D00041A3E28F0D62C80CF1B3A62AB403347F35
+:1075E0000CF38DB1E3F0BDC5C956BCB477979FB21B
+:1075F00070C5CBCF3AF0DC6CEB5607C6211B2E1FB3
+:10760000FF8F8A37363E74D978E3698E8F5F99F59C
+:10761000EB35A42119E39094BEDC9218718B30EE07
+:107620005FF8EC29580F3BB3E3AF4F01BD95FFB8AE
+:10763000F0D47DE08FEDB33A61BCF63E7F04D71302
+:10764000B4EF76733DEF78EE595C87E9F8A3D9057E
+:10765000B575EC3D3118D6233AB67F910A71DB55EA
+:107660007BA7E33C6DD5CEA9FD498C798096026E4F
+:10767000037D580732CAABA5A96530D07996CA1BDD
+:107680005CB670FCB8B18AC5E3551E37DE167BBD0B
+:107690002D2A4EDC34F396EB60FC6E925D2AE943B2
+:1076A000BCF83095E3E83EC86FDB439ABD8F29BF35
+:1076B000B3F00F2AA7F70DF2FBAC69C9AF9E84B2F5
+:1076C000A6E41EE3C5A13EF04D5BCFDB62767F6C86
+:1076D00006BDD9F16B8CCF83DCE85C8374BCF0D938
+:1076E0006088B39C94BBEEC2FD337BCDB82FAA62F9
+:1076F000EFFBA83F1D3BDFC6F532C2D7D53A48F8AD
+:107700008FAD83F0399C774B3C8B3373FE431C5A0F
+:1077100075E0731E6F6638D6E2D03DC59FD32D6CE1
+:107720003F91B6CE58B5E5CF0A31C4F5853C90D32C
+:10773000B1CBAE8B6A7C70021F2644AEA7C48EF319
+:1077400087D7DDB8BC407EE07F85D74B687E20C4FC
+:10775000CF03C2FB24863DE8D8C4D6613AE4D8FB07
+:107760000FB5F595148B414F037D5B57E98DFEAF47
+:10777000CB1F19269BE3A3F974E6CBD8767C824510
+:10778000F876FB612A85A8F57F0BACCF371D5360D7
+:10779000FEA18D635A7FCFF079F299E7453CEFB1B6
+:1077A000AEB105EDB8D15E5413161F34D23B83D36E
+:1077B0005B1D64E3C4991DF1013BADE7CC2BBB110C
+:1077C000CFD5DB8E297E5ADFC1869795B688FD52CC
+:1077D000304E0422E83FF3E2FE6CB67EC4E6E5C616
+:1077E00076E6F076BCCDB1DBF16E3BA76B6785BF6B
+:1077F0005161E7772EDFDE69C93D07EA3BDD2A13D9
+:10780000D8BF7FBA512C0AC4687F9245D6E2F24CA9
+:107810006FE87889E71DE3D9F946314941FF7A5588
+:107820007CDED18414481515E2146B6AD9FED2357A
+:10783000DF77A581BCD724DE86EB6D7506FE3A5353
+:107840009CF910BF704E2B19077035DA9B44B7496D
+:1078500047FFAAF8A2FE701E7F2DF7C788E4C2F387
+:1078600097A2A3B008FA233A4D4E6B8CF505D95E6A
+:10787000423C117C919DFAF392E4CBB12AD4A3ED62
+:10788000A3A9B4B41EC442A71BB70A4B79ECDDFC14
+:10789000594EEC77E7363E4F7013D599CAF683C13F
+:1078A000B8D1B923219B8CC60F899BE2D1C69F0B0F
+:1078B000DBF6EF077BB4D641DC8954CF285755312E
+:1078C0000BCE8D8EB1085980D3736FFE96D66B6D3B
+:1078D0001671FED069D7F685BA1341CF6CE411DC7E
+:1078E000FF0750FE2AB99B4EE3BE4002AFA476DFED
+:1078F0002B315DB4E3BCE7FC46160710C9D5BF9831
+:10790000CCE2702400F4F3F16405A7F33CA4F07E0C
+:107910009982E73A96BDF6726E88303944F22BB9F7
+:10792000487FBEB4DEEAC8867579E277B7C2399976
+:10793000325E5FBF12FDB953AA7E7ED0D3255C4F65
+:10794000FFBAB4F010D8BF32CF52B4EBFDE7EACFA4
+:10795000A51AF75921BDB02F8CEADD9342F4BEABD6
+:10796000F2E6C7D6C17C397AFF151901FBC92A484E
+:107970009C0BCEE7AC68D097EF03BB7915B093D8DA
+:107980002F17EFEB95BF6DC37F3179DC65F9EB0AFB
+:10799000C1FBDBE231AEB2ECB5C5689FCC697AFEC3
+:1079A0005A553D7F6D238C7CD4F339DEA5E79B3699
+:1079B000FFEC89CF0979FAF3BE463E4B84C71B0220
+:1079C0002C0E11B5BF2DB809E936F2D9C8D7760B00
+:1079D0005FF7E27CA57F25965466B281EE74298418
+:1079E0007A61D4A30C7B48807F0F4A09D4E257AE5A
+:1079F00078B4EF69BC3F4219FBCE067A2402BD2E53
+:107A0000D42338D10776DE463E70B65B41589F904E
+:107A1000AFAEE9599EF794FEFED822FAD546C0EFE4
+:107A200068D42B766E378904D664829EBA9C306EF9
+:107A300037FA2C6A9904F79F10B56C28DC7BE2C4F6
+:107A4000F4C77C1F4AE74882FB821B431753C13EA1
+:107A5000FD38A7EB66B07BDE25A404ECE0CD716CAD
+:107A60009EB298A77FB72ADCAE4E7BED7AF8BE595E
+:107A700056E15C7867F356CB30C80745BC7FC49BA2
+:107A8000587715B4DFD12C33BACA2C816110BFD816
+:107A90002B63BB1D6593F17C65D86F6B66FB403A29
+:107AA0009B3F712C8EB0E71DC19F5E05F1AC274C4A
+:107AB000B1F79F0CB79AF8FD35DF70FC6D8CDA7F5B
+:107AC00037DCCAF6C7FD7808ED4775E9793E0E3315
+:107AD0007DB896CBF9F74B6FC0FEEF6C1654184784
+:107AE0000AC53B6E1C45FB39F188C4E3302C2E39A6
+:107AF0008EBFBF9BB8D2801F13AF2302E8F3C43FF1
+:107B000012DCB735AE6629CEAB7EEBA038CF8675DA
+:107B1000528A5BB07367ECE8BF8F6F9574B84C9C6A
+:107B2000E6698179E684A304EDED84A3FAF23C12C0
+:107B300010B19D36FDF36B4FEAF305568E6F074982
+:107B4000057C6FF85244BA3ABB88EB015A6F67D98B
+:107B500000BCEFA6F3229CDAA5E9976251AC717ED6
+:107B600026E081F2EB0985E0F8F2C4523BC6EF5FF4
+:107B7000595A71058CEB9F7FCF7345AC73E011763A
+:107B80002981EDAF722750E229AED70A8CDF75E963
+:107B90002531F6EB6B38D670ADE1397D699C27D67F
+:107BA000BEC40FADCC0F29583A4250605EB64F208C
+:107BB000C0D78E073C973D37E3270F64003DDEE0DA
+:107BC00005F4B32DCD823B969FB1CAEA60F3BE07A0
+:107BD000FCB5B01FEF5EAA94601F7BAE7703CEABFF
+:107BE0006E87A02B7C67A95B88E7709758C866886A
+:107BF000674B75E9B7C603EEA7CE5847E97DB2C417
+:107C000084727E427621FDFE2A4230BEC0E3B50377
+:107C10006F269B22CF23FFC09AFFB095D6FBB0D52D
+:107C2000897249F6B804A0DFF5DFFFE500BDEEBCC0
+:107C30006446390EE0F31FEDBBAD9C4FA3E3DC6B54
+:107C400001FFA43C05F5C3E571A865C9702F01E5E6
+:107C50007B8C7554CD2F4DF250DB46E949B29BF039
+:107C60007E2EE276AB4E6DDF19E1EF45E8030909A0
+:107C700004F6A569F654681642F114FFE32CF610D9
+:107C8000CC3392CA69BF2909566261F5B54A67C209
+:107C9000E7AA719F3BC5652E1C6E22B8AF0D36D288
+:107CA00042FD9A9DD5ECF3DA4482F666ED635260AC
+:107CB0000DAD67A3D46685F849A65B2D80AD444918
+:107CC000928AE7BD0795337DB465FD3231ECAF5044
+:107CD000651FF30F7141ACF5BA8FC3FCF2BC00FC19
+:107CE000CA3ED4F50AB8352E2B6BCF75C082FE790B
+:107CF000D86E703FAC908FBB133F35B1FD02A1EB46
+:107D000071BF9DB68E66B41B540FDE1541AF3E9514
+:107D1000089ECF75D3FF72B52D7711F6838F93B977
+:107D2000C19A16F4DDC4912D80C76B5FC7BB38A222
+:107D3000ECC884373C6B80DE6F6A3F8C781813A2E6
+:107D4000FAC8E53352857B2A9CE13C94B75AF9FC8A
+:107D50008EDB9B94D271FDD1AFE53833F257D36BF4
+:107D6000A3BEE7AC76B598B1D60032C1D80E11BA31
+:107D7000E950B3C01EBD21827FDF994FF142E9BABD
+:107D800017F40EFCF38B8119809B0DCDDFB1827E41
+:107D90007CE3F1A3997E1DB1BFFA27A2A7C3CAF65F
+:107DA000873B800FD5FB2FF2F12384720ECB95EA2F
+:107DB00047643C44C3BD11E79A5EAC810B33B2F01B
+:107DC0007C1C01F98842230AD64C363A81AF9A7F4F
+:107DD000BD26ECCF26E2B99E554ED6DE1A59F3CB1E
+:107DE0005D16E8EFAAF882FE975B17F55EA2F3979F
+:107DF00088F3305EA90BE767DE4B0A09247F0B7E10
+:107E00000569EBB93A7EA5C4C5E05707E8D1F8FF8C
+:107E100027FB936DECCF836A777FAE259EDFB6514B
+:107E2000BB907B4F7D3AC305399C16890BBE5ED94A
+:107E3000937EE751FD06D72D4A9F0D7A3CB199EA12
+:107E4000B1295A8F5D7209DE5BE7DA6B437B67D439
+:107E5000EB8BBC5F5E1BE37B8DE8991107F37153DD
+:107E6000D760C05DB64A928B29B1D94191ADAFB60A
+:107E700026EBC691E8F1DD8F7652F32F35BFD2F8AD
+:107E80005ED8AFE4E38616CF148214FFB4DFF7C7E1
+:107E900079E6015FD738D9FC130E9A82BFFC03AB99
+:107EA000E70EA0CF46FB1007EB1A2342992C5E1277
+:107EB000D2E95B4FFA6533E84F6348C271CC4FC7D4
+:107EC000B16142CFF4F48B4B64F452AB027ECAC072
+:107ED0005CC21AAB26B8AF7B6036BB4766600EBB90
+:107EE000F7F1DFE3D87ACC7D716CDCD0D21F584B30
+:107EF000EE817EC912F19B73BE39DD402AC40FEFBB
+:107F00008F73DF0DFCB014B9B11F194EE21228DED9
+:107F100032A44601F6372455AA028B1B1236EE40D6
+:107F20004AEBCB2856F361DCCAA0B616E22019CD85
+:107F3000B1CFF56C8893BF5DBCAB29EA3CCA8638EB
+:107F4000E66F1F54687F938BD9799470DC86920F0B
+:107F5000FCED88BF0D3BDBF1195B0FF527323E1BB3
+:107F6000E75F2030E897C4F33F5488644DC2F9912D
+:107F7000DF04DF992C383FB2115723D8CF97E2584E
+:107F80005C759DE05A0FF99F485D16B86F47C3FFB7
+:107F90008F27DFEA92E82B8EEBCE67C39C95EAC36E
+:107FA000F320AF8EC9E787AFC51E740D6678738B5B
+:107FB000BAFDEF9ADC82B24E6E56888744DAEB78CF
+:107FC00005E7F71D429C0BE6431DCB0546A760E184
+:107FD000E703247D9C86DB436D1C78272E13E9B7CD
+:107FE00011FF18BC1FCCE2B2003D1AFDE173A4865C
+:107FF000739EC673A06959E1B84D3AEE932D51E0D6
+:108000008E2F72BED986FE97D7C1F4DF8887FE60B7
+:108010003C2E736E92F2AB15E4DB5FAE49047BDB62
+:10802000FFCEE30E90AF910F9D827FCC4158DFFAD7
+:10803000831C739F8896A6A50D28057F342D3D0DC2
+:1080400053ED79BD5D8A19073CCDF5EE1BE3B59E76
+:10805000580CF3C3D3D09FB39E77DE73A3BA776176
+:108060007CBC3E8EF1BB5ED1F8A826809E75E75D94
+:1080700009EC7E924476FF9093C97383CF522A49CC
+:1080800091EFB9D11FE947DC33E68111D82093ADD8
+:10809000886B16BFD1CE655043C7E497C8E8FAB9DC
+:1080A0006F4C29EC9F916DCC2E5DDC301DDB4B2598
+:1080B0000F588753BE2E2D31B920AE7376D19F1C39
+:1080C00070147C51466B2EE0FD88E8916DE331D44D
+:1080D0008DF3B76573954088422AA59E1A2426978A
+:1080E00019B8EEB8D01473FFB3DDC6E6DFCD714E1C
+:1080F0004CD3D20697968D8DCC0F44396978A47AEB
+:10810000985E36AEFB9C30C5470AB46FD4A74E9933
+:108110000461DD40B387299CFF9A3DD6F42105F424
+:108120000CD6014BA87DD4E43984BF9A8AF14AFC6D
+:10813000139A5FFD02E6038EEB0AD0DE51FD5F8FDE
+:10814000FA3282D96F2BD8D3883865E7DEF707C1BA
+:10815000FADF87DFBF100FEB407F91BAE2C17E9E4E
+:10816000BCFFDD783837F4E1FD2C5E7197611E3578
+:10817000C1C6ECFAA3B6926CE8D702DF7FE77A2299
+:10818000704956B3758DE501D1709E5C7F2F4F55B8
+:1081900063B2E19E1E3FD65BC5EFE732CAA192CB28
+:1081A00061F9B64D4A860AED7BDCB67E706E8FA013
+:1081B000BD3CD9148FF3118D9E45DBC6283077FA6C
+:1081C0004BB399AF7FB7CA6C5C7017C37A9687F3CD
+:1081D000CD48E7C17D36AC6FC9CFD8FE9485B4AD2C
+:1081E000D5D4BE7A9AD9790B633F967CA816F6A7A8
+:1081F000C25BF29080F36278FF7E3A4E79563F88F8
+:10820000EB5EC67E1AEFCD319E5FD5E653CBB8FC50
+:10821000CB8807F52FEA5C6B335B9F36C6FFCE1F1A
+:10822000CAB261FF6D3CFE914B26C079E81D87867E
+:10823000245CEE3EE533FC1E26B8571AD2933E82EC
+:1082400069B64D65F76434BF7D2FE0AA3AB81DEFDB
+:1082500019FBBAF6A6AAF99403F6306B7687FA9161
+:10826000AB013FA44CD0F997D59B2E286CBECBF820
+:1082700070077F7E07F4371BF659AB3F9A4CE57CBD
+:1082800047A57C31F21E32BF4D7FEEA6AFFDD5FA79
+:10829000A9F55B2BAFE2FBD18CDF69F8CFE6782C38
+:1082A000DB52BA6E0065D19ABD2706F3F368784EAB
+:1082B00047C397113FCB484961BA108193E647B154
+:1082C0005F9A3CCBEA16F2FEFBD3F8BA5E1AC48F73
+:1082D0007AC38D111F1D72DB60D067233E3A7AB8D6
+:1082E0005FE42736E62794A9EE4288675137769DEA
+:1082F00033C24F3929D51DBC0FF46C0BC379C4F8B8
+:10830000CB9CB9D7651CCF57C6ABFDE13E3D94DB96
+:1083100044D81760F6C37B5A3BED3EB76BA8047C8C
+:108320002FC2F4B4AFC435746877F9D2272E38C0A1
+:108330008FEE1C41308ED311AFA7F7773611E9F9D4
+:108340001D9743A5D4FA8F3F838DDAD28AFB1DDABD
+:10835000BFE471A02FCD45B1FAF927FE1DE1F786E4
+:10836000DDC5F54C9B972CE072BBAB99AD672FDA5E
+:10837000588AF230EED77A43701666D0AA3C8D63E5
+:108380001490BF513E4B5CDFC17D605172228FF073
+:108390007D011EDCA753562F62DCC328BF7CBB9334
+:1083A0009DA3576B701EB7428ABD0E79A5DDF4B54B
+:1083B000FA63ECC7C22601EDA491FE655B6AD70D96
+:1083C00020D07FD6BFE87E8406A25DE2FDD4FA55B8
+:1083D000465C78FF40D4FA50DBF524723FF5F2E6B4
+:1083E000C5B82FBF9AF69FB03812C68534FA357AD1
+:1083F0008DFD2814CFC81688E3AE165C609FA3EFEE
+:108400002773EBEE3F5CD8B07F20C8AF5D62FB66A0
+:10841000DBFD02CE0B3B3F206C7D60BD80EB693DF8
+:10842000CAAF99ED07EA598E350ADCE757B651888D
+:1084300029C765F5F9AEA111766A7960866BA88EB9
+:10844000DE46DC1FB2A2A154F77C809DC793B8FD25
+:10845000EE4DDF484D62CC3893A65F9ABE69FA971D
+:108460006F57D93C470A1CCCC804BBFE18CE4BA89A
+:108470005DBEDACED707E6D157AA9FB8A05B1F58DA
+:1084800092C7E4B3442CC6E73DD957CA079D7D1E69
+:1084900067D7EF7FF8B6FDD1FAA1E985D63FA35E95
+:1084A00018F9AFC5D58C7230F21FE882F9C11B7B79
+:1084B0006D810704D07746A77FAF15E9EC482B7094
+:1084C000C139C83FC00794CEEAF4DB315F239694EC
+:1084D000DA715EC7E74DE3FA163FC8E17ED64EABD0
+:1084E0007B2C3B4754920CB89852DB36D3E2A4F86D
+:1084F0007C647421DC2B3AE5B1B69910FA5EF2C8BF
+:108500009842B85F7ECAD6B6772D2EEAD7D58E2D83
+:1085100084FBE55780DD80F60796DB10573DE58943
+:10852000E7F27995BD3FCE5C329FDDCBCCCA2B29DB
+:108530008F2D743CAB3C3CFCF7A09F95ADC545101E
+:10854000B7A98488371DCFAADC8E902D9B8DE79329
+:10855000E87BDB6C9E5576F0EB2EADC5F1ADF2B04D
+:1085600084FA440EB1B8A844FB6AA5DFAD8DA37EA2
+:108570002FE5EFDA248B0BE6AFF4B91FE6B56B936A
+:10858000DCAA1AF15C931F7C0774AC35B175FBFD56
+:10859000AF0D4F68BBCC78BFDF4726C33CA4C5678F
+:1085A000C1D4589EAF38F17C44BE89C5358CE5BF37
+:1085B000D2EC2C51330017D5871416AFA67FE04FAD
+:1085C0005611A617D5849DEBAA3A4CF01C4BF5A189
+:1085D000423CC702FBFC3FD6E1F05F738EA51B5700
+:1085E0008C4F059230598AC0F534BB559717FB9BC9
+:1085F00046407F8818E78273186286A96607EDBF38
+:1086000078054D293F24A74B84FB5AEAA64E11E179
+:10861000BEA93532DF3F6262E7CCB5F69A387FB447
+:10862000F4B4BD6407C8FDEC5BADB936B67E81F32A
+:1086300061ADBF6B04371160DE7580E0F9809C147A
+:10864000D202FCB311771EE0ED3D7B12E7375B37BA
+:10865000A67F1990BACCA697558AF7571F5984FA66
+:10866000E04A30DD9349F36FD997B17C86E9422621
+:1086700085F0DBF67296BFC6746108CDBF6B5FCE26
+:10868000F2B0C04907B623F68A42FF486887E37D07
+:108690009BFB1AC0B76462F117E91505D753B47D87
+:1086A000216BE9440BF0F81ED84D88A7D416FCDAEC
+:1086B00006F1EA02B70AFB3D36F37B83BE69AAF1F5
+:1086C00055B49970FE0329F0FF43CE4F4D2EA4C937
+:1086D0007D0DEC8B258DEE6B601DEDB4DDD306F6C4
+:1086E00066EC1BAD53C07E37BDF3A75CBC9FFC0A94
+:1086F00056CFD837E89C90F6E7EC6F066D8A5C8F12
+:108700003E6DCFFF14BEA36240FF54509DE40EAAFD
+:10871000876BDC4455B260BEAC9F2F3611669FB6A6
+:10872000D94ACE825CC9C0108E5B45F6924EC86BAA
+:10873000F69CB426F5695F9B92BD5A847139292352
+:10874000787411D8FFDFB17B3D04B71BF773BE14FB
+:10875000BED78CED0FB1C1FE10D07F1749F3A7F241
+:10876000F8178B2F9394DC887930EF07FD7E1AEC95
+:10877000379F6063FB0768BF44B0AB63888AE958E2
+:1087800088676581283D98DF431A8FDE47EB7FDCE1
+:10879000CAE2499606A28B0F66C7B338CB4C078B4B
+:1087A0000FC6C98DB782FF10778E38C17FE8FCA550
+:1087B00022E1FE22C97923AE8F1D3411A0F7593969
+:1087C000E084F599AEAB247533E9AEAF93CB5BABE8
+:1087D000F77145BD0AE272731DCC3F7D369FE07E86
+:1087E000E8AE534A00D64D93322C3591F19F2BF9C8
+:1087F000770F390B32E321FEBC378E40FB13F6C5F1
+:1088000099400EBFDE9663053CBC043CA27C483216
+:108810003BEF86FA922E507A33F139DB272FA9638A
+:1088200012287F27DD6057E1BEA967AD8D37E07E56
+:10883000D0174C78BFEE4B8AAB14F22F9D579D603A
+:108840007F9FCD6C8CC3FEBC60C2FEBC14D775F597
+:108850004A4AF7C323587C4AB21109ECB2642A5041
+:10886000EFA6CF73E3D93C49B3D3CBE399FE3C2EBB
+:10887000103C0F2099F2517FB4FD3A9D5D04F7EB57
+:10888000F49BD52A028EE34AB5B851488478CFE4E8
+:1088900012827EDB64BB8CE772607F309C1B9BC2C4
+:1088A000EDEF940F2A713D814AE030DC7FD962E719
+:1088B000F768F175C5EB394EAE236D22F891D75D9F
+:1088C000222E88075D7F498AE9474EE7F53E23104F
+:1088D0002981BE977F51950077F944EFE74DAF2F7F
+:1088E0003C05E3E0548BE139F889488F1BCFF74F03
+:1088F000771AEE4F8EE7F3D6C16470E43E316D1DFA
+:1089000068BA38F209F4538B1417F065BBDDFD3EED
+:10891000AC7BFA5B6572B938E2333EB69F6FC4A593
+:10892000385CFFA1F8B4032EAEAEAFF35B69BFAF06
+:108930001ECAEA071C825DB9F29729C960E7CDF12A
+:10894000CCDE68A9863BC0973381E1CB39BA5B3F67
+:1089500057C567E27B9ABE01EEA09E3D72607EAC79
+:1089600075658AD75580D7ED7682F3B31FA55BE690
+:10897000829E69EDEC8967F837A6EB6A57EE87753A
+:108980001DFF676CBC9836E0921239DE7FE86438D0
+:10899000F3AA75336FA6FDF3DA655CBF49E5E78B93
+:1089A00022F1921E81170D771D7616EFD1F03375E7
+:1089B000F7BB223C9FFA1921CE4C129E8768F8998A
+:1089C000E267389C72888D13BDE1C7DDE59C06E641
+:1089D000310A3787186E0A283EF0F7B77AC08F1130
+:1089E000374FF58A9B2FF13CFCAABD532FBB6E1865
+:1089F000F4E9F77D1AD389B6D8FB828F727EEF56E1
+:108A0000EA6ECC067B7193899D7F9348C6AD14E7CF
+:108A1000BBE3B47BE56BB220BF5D62F6677BB31945
+:108A2000EDCF76BBC78371D7340B9ECB2692A70DB3
+:108A3000F6F5BB0658D4C8DFD1F82EC761A31C9A3F
+:108A40007802FCEFD798FCF36ECA811BEC487A19C8
+:108A500093C3B893CA2611E2428EFCFD80AF4FE06B
+:108A60004E2DC0C37105EF25AA3EAEA05DFCCDBE64
+:108A7000B70B21BEA9ED1F9EB0E7EDC28291F03E7B
+:108A8000C3D96BDCAE6A793C4A0176D2702FFDC443
+:108A9000F07926FDBDF225809FECEE72E37DEB734D
+:108AA000E084171D776E6D734D07B360BC6F7D4E0C
+:108AB000889D1F9B7DD43D1D4C65D47DEB1C0FB75D
+:108AC00091D65D7162F4FDDF747C3E160FF1FBD729
+:108AD000430AC4C11B959A6BD87CA2260BEC8FA6C7
+:108AE00077F847F9D6F8E108DD7DFFC3F8F8F38899
+:108AF0004B62F738B529B84EF82861DF35F271EBD3
+:108B00002BAEF739AB5E9C0FF6706CB91BD76D5767
+:108B100039457CFE1312B26481BC5C12AE7734CA54
+:108B2000EAD41342F77B442A1961A7E57BFAC58D85
+:108B300085F6EF70784C0EF02BA4AE43F0DD84493F
+:108B40003963C16EDBC7AC4D86714CA39BD255B463
+:108B5000D5DE4D87465727C7C91D8E8526C778F6AF
+:108B60001DD8A1E0B1760B7CAFE1A071EF3926FFF3
+:108B7000083C80FCBBF1202C80BCC6071B4FB5FC19
+:108B80003F1F0FA181209F1EF1007108C7B7C2438C
+:108B900016F055C303F5D7AE02FE68FE5AA3C2F61F
+:108BA0001D6A790D0745F67C7CCFA510DC3F44F6A5
+:108BB00059D9396D4F22AE57BCEC646D747ED83EE6
+:108BC00098BA9864B283F9EBDAEF898C0909E8570F
+:108BD0008EA106E10EF4E306A23D74717E9176410A
+:108BE000807B37716F7906F897A164D08B31E6E20C
+:108BF00010E07F876D4A06F88739B6C95980AF5DA6
+:108C00002356BD0E43D6AE01E52F6F51BBFD27CDD8
+:108C1000EEB5F06AB5F66F7430FB74BD9B9D0F0224
+:108C2000BB1D498766FF412C4087109A63FACA86AC
+:108C3000F6BAB90DEC39D041F9BA5F204DE01FE426
+:108C40009BDC2953C1CFEB179280CECEBD5F0C8643
+:108C5000386571F3AB4781DE626D3DD4A55F0F359A
+:108C6000FAD19ABFA3CD2B347F489BCF82DF04E596
+:108C7000D9FCB9D3CCD6AD26872C786EF9F1F3EABE
+:108C8000556EAEBF12ED4731EFC72DA415E9D2EEF8
+:108C90001DB999F3A3F8109D876643392137513EDA
+:108CA000DCC4EF1DB9C9A5BF57E196BCD8F78E68E3
+:108CB000F5F4F6BE717CB8D6B06EF46DD3433E7653
+:108CC000CFC87FFAD83C77D210D12FC1809A97CEE7
+:108CD000EE6970323E1C52628F57FBB9FE4E32B5C0
+:108CE00065C3B9E5FD7BFE8EE3E32B7BFEFE1EF83C
+:108CF00089134F4904F6B54E3A352E01D7E7F3D222
+:108D0000703D59ABD7FB69938DB0E7881FED77575E
+:108D10000E527ADC0AD067C1F4B7671EFF29D477F8
+:108D2000F1B84422CF4D142A9EA110C72DE4BFBF35
+:108D3000735060FE92567E90FFEEC5F31CB7B021D3
+:108D400042BB8FC41C21E79BF83D199A5C6F3A59CE
+:108D5000744ACA8E960FFCFD33E20B5A5CA199F35C
+:108D60008FB4FC11CFB77CA7E96E09FCF3EFA4899F
+:108D7000C41DD1EE0C95CEE023E21C2F3B0C7E4AA5
+:108D8000CB733FBD998E2BDE3744DC4AE86DDEFEA7
+:108D90007A36E45BC598F78F18F9FB9DE6BBF1FEC8
+:108DA0009121092AD2D35BFB93AEA638190D722705
+:108DB000CCCFCB65F77718E5FBCA9EFF486E1BD971
+:108DC00033BF7B92BF510EBF3D5380EB4EBDC9C335
+:108DD00088DB7DB49F7EDABF10EDA79FFA63AFF802
+:108DE0009C98FFBD2F0DF31A5EBD7B9F4E067F4EF4
+:108DF000C3E9F464869B89BB7F9A4CECDDF232F2C6
+:108E0000ED7307F36BE610D7EC9BE93F770AAE787A
+:108E1000B4177ED20AFBB34A388D730E17A2FF41F6
+:108E2000F87910E33836471C89E7DE7BFDDD9BA12E
+:108E3000F932985BE37805BFC702B8368E53456FA9
+:108E4000D449E0B2154AAB981DE37EBA469751CE9D
+:108E5000474809F6A3273A8D3830D2ABF9E7DAEF65
+:108E6000C0507E4C4FA2F5DDAAE663FFA2C661CEDC
+:108E7000979EC6DF9EFA959CC0E3DE1CFF174E4E00
+:108E80007B0BD8DB93BE19E5662CD7EC47213490D9
+:108E900083A91FFC912109A9A80F859714E2A6E3D5
+:108EA0000C19A83FFF4E8AAF40BCDDE364CF7AC205
+:108EB0005BF52513F12477E34E0E3E6603DCED9659
+:108EC000EA6C101FBDCE5EBA06546FDAA705B3F088
+:108ED0009E8736138190D9F4E6732D1047F01E2536
+:108EE000783EA0A079FF54C0E9EFA5569C47755E77
+:108EF00024E4B1083F33D8BCC6067E5830859D6F48
+:108F00003B984874FB90F72730BC068F9FBFD91D54
+:108F1000A3FC122F9F49DC29D9382EC763FCA3700C
+:108F2000BD09FB3F4D701D4801BF659E80F385CE96
+:108F3000BD130EA4507A3BEE4C443B333DF8E0DDCC
+:108F40004E2A88C6FF1E8BCFBB160A78CF40A1EAF7
+:108F5000C27C615926EEDF98F08FE499C5503E43FC
+:108F6000C6F9CD74B1528278D4D9342107E68B7B0F
+:108F700084B65AF81D5C7F296B8738FDC930FF7CA9
+:108F8000A738790CFE769CAAE587E1EF0312C33C73
+:108F90006DD5CE0BFBCDB47CD56C01F7EF4E77666B
+:108FA000107F047E0AD753798EA5B86CEE5F00B8A7
+:108FB0009E59A43F3738BBC4460291EB168213EF8B
+:108FC000213BC8F7697709FC5E7CAEE73770BCCF00
+:108FD000999BACFBAE94303FD3BB5364F771E4B3C1
+:108FE000DFA1D6F4EB46AE8737F0F9F13C4F868E21
+:108FF0008E6288D288403F5B47BEE5621B0ECFA5DC
+:10900000E20787E7D3F66E1C6198D78A956B111734
+:10901000696C1D6F36EC8213C16EEADFBB254F9F72
+:109020008FA1C797B5139A3D98BD57C475C3D9F999
+:1090300094CF0289F2D3BFAEBD9860721D8078D004
+:10904000AD97DC788F4E94BDF8A0E81BD98BDF502C
+:109050001DCCA37AFD64021F370791416037A68BB0
+:10906000DB7E0A38EAA4E3A639068EB471479BEF8B
+:1090700017523D06DC90336C9D65FAA534DCEFA4F5
+:10908000CDF7C37684FA25AE18FED26F12B274F70C
+:109090007A84ED4A845F22E77E7BBF643AF5479588
+:1090A0001CA06F20F18F457B8671C942D81805F14D
+:1090B000C1B47318E7F14A74FE8AE3F3D3882FB082
+:1090C0007F4252B77E18FD152DCE3CD6A9F9537AB2
+:1090D0009C84E38DB3D87DA51A4E0A819FA0FFB36F
+:1090E000448CEBF4861BADFDDEF012A2F6084C5664
+:1090F0008F78E1FAF775F1F2176D7C194A86F6055B
+:10910000271A3E34BC18C79BFF34C4837A1A6FBA3F
+:109110007A196F0E8C90D1AEF7E6D77CEAE4F3EAC9
+:109120000427A6375C351B7F97682CD811F037F9D8
+:10913000B8158E6BD5339C1C685B24C1FA9117EC73
+:109140004766B71CB478F0FF00C6C481D500800024
+:10915000000000001F8B08000000000000FFBD7C25
+:109160000B7C54D5B9EFB767EF7924334966924940
+:10917000323C841D082121090E21BC1137490811F8
+:10918000A20CA8888FD6011F6020094DADD5536F62
+:10919000332181526C3D58BDD67BF4F43758ED41F4
+:1091A0000D75080183277026A098F0D020F8C07AAA
+:1091B000DA6829451B92185A0F6ACFF57CDFB7F69B
+:1091C0004E662683A5F7DE73879F2ED65E6BAFF5BE
+:1091D000ADEFF95FDF5A9B4AC09F0A50B315209844
+:1091E0000650F9E1864A4806E83B20011403D4966C
+:1091F000C9411BFEB5B4FDB1C745DD0C5689DF5131
+:109200006126C0F5207E0B950EC5E60658E695BC96
+:10921000721680D62EDEBFE19225A862FD7AAFF9E4
+:10922000E31E9BE8FB35FF5F03C800B8517F7F1941
+:10923000FD0FFB2FD3A460185F5D363BBAFF8D97FF
+:10924000CA3F91A6022CD7629EC34F3E93A7F2223B
+:10925000CCBE24AC5744B78F7326B9CFD9F12FE3D6
+:1092600061FCD732C0C5F3656F51F7AFE977EDC840
+:10927000F2483D526601E8ACB77119DB5E6E017FC2
+:10928000C881254D50C4650052010A9DB8981958EF
+:10929000BF64010DF9086313E0F7B93A1D1386DFC7
+:1092A0003F88E30770DC308E1FC8013854EFE4FAC2
+:1092B0006BF51EAE5F93822FA4E37F87BFB0A8B883
+:1092C0009EC5EDDF51FC38DFE24B0A8F3B9BD69306
+:1092D0004F0B8371B49E3FF716FDE30D30DCBFB634
+:1092E000FD338BBFF0F2EBF95BF3E7A7A83C3FCD72
+:1092F000AB150CCFBB44011883EB5C9A1BCD5F63AD
+:109300009E58F9C6CA6FB9FE7EACFC56C4ACC79075
+:109310000FF4A2328D8AC3FF4B26D0A65F5E7E4338
+:10932000F2B1F8B3BD0523DB017EC9721A1E4F9757
+:1093300017742BBE42419719F5BA52B70BD4EF40C0
+:109340000ACAB9B213C28948D8F5E72B3E51A8F42E
+:109350004AF071943E037C6CC85B1E1E7FD125E4ED
+:109360006BDAF0BC8B146477113D1F0B8138EBA8CE
+:10937000A17114EA1F60396CD9615A15C2755C631A
+:10938000813B7D54268A32E094B87D93D3C4E3F6C2
+:10939000FFC56682AB015E3E985902489FD7EA3C02
+:1093A0000613014266E0F7BF4E52B9DFE6240824F7
+:1093B000E0FCA074DBC85E9412805CB43B65B4250D
+:1093C000D88843362B611FD961BF578106B4DB2F84
+:1093D0008DF70E056E0714C9E68F734C8D59F47E18
+:1093E000B87B1EF69B55A4A8DBB08BCBAA7E87DA90
+:1093F000FB0E589DF45EFFFEEF7798699CBF8017C7
+:109400002984D70E5881DAE73BCC41F21F8BE4E385
+:10941000B209EBFD030056EC3F7F55B814506ED7F0
+:109420004077A313CBB924C738F27B8DD69BCEFEF1
+:10943000C3310AE5B44097D302DD6F951E90D98FF2
+:109440009426C941C81AF653D7EA325A806C253A95
+:1094500016B4E17AB1FDDA4B4A5CBFB4481F77E13C
+:109460009F4121935C08D17ABBA84DF8A312D01478
+:10947000C0294B6D31EDE497909E45CEE8E773C966
+:1094800077A25EEF8EF14BF833D1BCF73BC5BC8BB6
+:10949000E4BF26F7E0FA5FB668EFCD437A074E9A4D
+:1094A000E1597C0EE7B13267245FDAD0AE83399799
+:1094B000B78BFD07133515E97999F4C741F5D19AB2
+:1094C0003AF5F2FDA7F60C94607778B97985021326
+:1094D000581D4F7B3286F93D82AF3AFF63F9D9229E
+:1094E00041931DF9BCB0DD5B46AE65041F3B918F17
+:1094F000F85EC980C6F35C291F0DFB78F95CA246B3
+:10950000FAFEF2B9D11ACDFF2AE96BFAB0FEEF3FAD
+:109510003B9848FE13F9A82AA817032E9BF759D6A3
+:109520005FA1F7A15139C16D586FD1F5FCE5C48138
+:10953000A3F9C4EFEB4DDE67691A65E3C41585E452
+:1095400037B7969CC577240DA407D17E24D509771B
+:10955000601940FB217D0BA402EB93194240F336C6
+:109560006AF034950BE6AB29C4EF411CB3DB41E351
+:10957000A929A4E7F0D78B337D8523F9DE528F0A22
+:1095800085F3B4D6DB34251B605FBD93EB6DF51E10
+:109590002E5FAD57B9DC742CF9C1208E53AB593412
+:1095A000256DF87D57AAB08F05E86788AE052005C0
+:1095B00003A8730B1ED6F55E91829B249213AE27EF
+:1095C000829F2897C19EDC08FE36294D9366B235EE
+:1095D000B0BC8BF24DFC3E06FFE0F35923FBA3DC4D
+:1095E000A3EAAA4B627EE6BAB42417963F74F852F7
+:1095F000A86C916E397C01B8EE12F55BE50B38FE74
+:10960000F4F0427810E3C374140CF1157FB713FD26
+:10961000333A2C40F2C180CA7659A4D3A37D2E4997
+:10962000E7703E329DAFC7E07BD6CA30E9D13EE855
+:109630004923BE17DB7C76B428A443C855936EF645
+:109640004838DE9C748B5726D226FAA66F44FE75E6
+:10965000A4E384D8BFA32363AC8AF6A6296FBC4FCA
+:1096600076ADD91C61812BCCBD3D11713C139E712F
+:1096700052BC229FF635F2BDF377C901F66B8873B1
+:10968000C88F759E4AF686719E6B2ED9BC56D27FC6
+:109690007A11EDF56062F254F2CFD05DC6EBB8D628
+:1096A00026D6916FF617BBD89F850F9FC0F7FE6D2A
+:1096B0001080FCE935DD1FCA80F4949AF2327B9069
+:1096C000CEC3D2E4142A9FFC5D720197A7927B89D6
+:1096D0003F074D7695E67DA75E2DCE467DD1DE72A5
+:1096E00098001DD682B71C0A9527EAA1381BF5E51C
+:1096F000AD7A1B9727EB9D5C9EAAF7707918DB4922
+:109700009F5EC776D2B737B09DEA5DD84EE5311C73
+:1097100097CAA2DB9378BC96DB922CB48E83C9D017
+:109720006CCC4FFA144E0CB78217E03F1EFB6AABAD
+:10973000ED2A8C97567FA1340DF9F4B3AF2A14ACFF
+:109740001F5B3CEEA1BF60BBF967A61FDB90DE9BF1
+:109750004E395A8F63DD9EAAFCD841FA792C119DAF
+:109760002399B5B94B433AA6936F1CCD6CD760369D
+:10977000D6D3F47AC07C5DD97C8095A53DF9E042D2
+:10978000257159AFB3217F57DAFDDFA3BA25B0ABFE
+:10979000A2EC2AAA6388247B97CC41B6F7B1927BCE
+:1097A00005C6BB950EFF7F12BF0D7BD1A43FA491D0
+:1097B0007F98A949E072B3BC8393A4E1E746BF95C3
+:1097C0008E45FF49FABADE25B37DCD982F6941C792
+:1097D00048FB35FACD38AB9691FC669E2F6FA2728E
+:1097E00059858BEBBE55B39AC8FECB1C977BBF94B3
+:1097F000DF7FD06566BD2D51B05F9C3868F49B8ECD
+:109800004A46B87BA02B31F82CE9F5697F6312D664
+:109810001779B28A64DD3703D75D3BB6517BE5EB40
+:10982000AD6C57DE242FE1F299A89069D8BED02103
+:1098300079C3642AF33F6A4AA376A7E425B62DD4F8
+:10984000A69D28A6F66CD9BB90EAA7D5320A51A7E7
+:109850009485F32E60BFC5B9295E1BBE772AFCD064
+:1098600045D2DF85B949DE04F2F34AF0E91AAA7B52
+:10987000ADDE0695D6F15869328DA34A5E13D65BEC
+:109880006E28FD1F4447892F052489DA5D0AE1D738
+:10989000277FF7C33227F66B192701D9CFA970DECE
+:1098A0009F88FE859D896A02F9698BB38CDE6BB156
+:1098B00048CE4D5CF79552FF408E597D1EC73D7EC8
+:1098C0009B9DE341E55B058C838EDF3686E342E5B5
+:1098D0005BF34BA83C6E1278BDF2ADCA0A6E3741FD
+:1098E000989C4AE5EDDFE2F7B697FEB0CC8DE31F1A
+:1098F0001BEF62DF82722A5622FC24F60789DEBF44
+:10990000BD9AFB7748990F9DC5FE170B528AAC385C
+:109910007FB93B21AA7FC55857547D49F6A86225D7
+:10992000C24F56166445D56F28968AB323FAFBE6D4
+:109930002744D55794B98AB323FADF54392AAABEEB
+:10994000F2A6ACA8FA42D31CE13FEA617E99B0F3DB
+:10995000F965D9208C89FCA953F47D03DBEF263B04
+:10996000EF12F8A9C885F809E552D655CC71B9D8D7
+:10997000AEFBAF00747B6692FF17BF2E1C8FDE8399
+:1099800020FE99497848FC1676231E207CA460DCD2
+:109990008EA0A7CC111DC72B40CD27FF5BD1B9846A
+:1099A000F154B96779199A31F231FABD0AF9618136
+:1099B0004362E82EEA32C7A5B7626CF4FB06AEAB91
+:1099C000D0E96B31F99B52098B05B46EC235C67A6A
+:1099D0000C3A2EB79E0AF98E3214FFDF5C572CFD2D
+:1099E000001B797F114BD7A04BC78188A71807763A
+:1099F000A6323EC49F3B1E3E30704F25FA3757A417
+:109A00007F7348EEE58597F76FC6B897C37BC6B8F6
+:109A1000C6FBD02CF3FCC6FB43CF5529FEF39DD8E3
+:109A20003F29CE73B714FFF973D1FD17286AA3033A
+:109A3000EDF82848DE00F1FBB8AA10242B3DAD3527
+:109A400051B9E843BF427874F1D9401395F37A8352
+:109A5000C7ADB8FEEB726595F20D061E8A5DD78C18
+:109A600054B14F3A7A49B5ABD8DE1250EDB4BF6865
+:109A70007958B5D33EAA45830ADA2F6A134D1B697C
+:109A8000BFA1E56389F59C54E1E7F352058E31CA25
+:109A900067657F5E2A96D5B69E47098BD47C316078
+:109AA00021307094705EC1489C7754093A68BEA317
+:109AB0000F071DBE083F7EA5386F14295B3AE9A742
+:109AC000A445FA91525B8216E93716395D51F5AF1C
+:109AD0009CAAD8C77B4645BD779D9A15D50FF16BDB
+:109AE0002EE1A0460BE42AE4474D895EC277B17CA3
+:109AF000FC177DFD5E8793E01398DDAAEC8F13972A
+:109B0000BCA5827FB1CF57A48A7DEA6F683D586EAD
+:109B10004F15F435C93E01E21037933EC4D6714F5C
+:109B2000BA8AC6C3913DA4775EBBE922426FF84E64
+:109B3000EAD5D729A8CFDEE9A6EF4EC4FA23A98B30
+:109B4000447D9E69CF04ACFF34B55CD4AF364D374D
+:109B50007B017E058BAF2BC37ABADBE74FC579FB60
+:109B6000CD8EAD12E219C52441917B78FFFB8805AB
+:109B7000E3290A16954C7321AD76ABD82FD724A0D4
+:109B8000FFA3FE259A4AFCAA4930E4DC9341711DEB
+:109B9000EECE3491BF30F66F760BBE87EFE7D8FC80
+:109BA000B5425FC2C92AFAA5FBF72FCA24BDD89EC9
+:109BB000EAE4F5E7EF99E7217F85747D97FAFD7F69
+:109BC000A46B533CBA9ACC629EDE96FC528ABBF9D7
+:109BD000E3511CD2B0BC70BBCFCF1342A82B8CCBAF
+:109BE000358F84F54697C54B387DFB907CAFAC6CC8
+:109BF000D4F313B25DE88D9C62DAB81BCB9FEBFA0D
+:109C0000F214CD3B83E61918B71CF5019C03E3560B
+:109C1000148A3AE9832C170D10DE1EF8569297F736
+:109C2000C763077EFB03ACBF7747BE9770F4078915
+:109C3000823FAB82131A7BB03ECD1ABC2A8C743E95
+:109C400094E67F96F4E0366B7012EB9B6363128DA3
+:109C50002F69C0FB10637F87FB38D5327124EE1F5C
+:109C6000392FD888CFB7CC117C36E6459EDA28EE5E
+:109C7000BC375B3C37E8C0F95B88FF063D4374C0E6
+:109C80005827C7031079A445B243E461FF60E2BCE2
+:109C9000492D191FD6F79C35F1BEAECFD85780E6B7
+:109CA000583D939B789E392736C94C6C00FFCCD425
+:109CB0005948AFB6ADE77DFA8CEEE87DFAAC4E7F41
+:109CC000A903DF9BF57EFC7CC83C7DDCD910942980
+:109CD0005ECFE989EE374FDFA7CF3B1FFDFCCD54A8
+:109CE0003DBE8D86D191798E3A7DFF33787C420AD4
+:109CF000E929F93A19F96E5165989D3AEC375AEB12
+:109D0000B15F0EF9471B9785A79D7711FD6DF5A8EB
+:109D1000D016F2931E2E0D7B2A3C0D77C2D4887983
+:109D200074BD37F838F8BEE0E3B49EDC9FCFC7BA05
+:109D3000B9D30C4175789D73753E0D82E0F3A0D3C5
+:109D4000C27C9ED9F5CBE9617C64F598408D585F63
+:109D5000829A086A843FB5E7A646D565433E3ACE67
+:109D600098AE8F9FE41D1D358E81370CF9BD9A5A30
+:109D7000DE493864BA631DE38E94D913A2C62D3E22
+:109D80001E2B27641CE17624F29F08D79F56A270F1
+:109D9000C62C77803800B33F546270C97699EC685E
+:109DA000EED9E8E7E6B4CBC8ED72FC84A93F9FEF9B
+:109DB000FEFBF9E9D2A2F9995611CDCF745F343F79
+:109DC000335745F36D943F9A2F63D64D896ABF6A26
+:109DD0006351547DFC8373A3FA6761008CAC4FDC44
+:109DE000BA24AAFFA4ED2BA2EA939FBA2DAA7F5E04
+:109DF000704D547BFECEAA2B927F61A82EAA1FB174
+:109E0000D7F40DF2BFBAED1FA2E6F9EF96FFA23428
+:109E10003D2FAFCB7F998E435C1AFAC7A2E138453C
+:109E2000E915F293AEF637BEA0FC4BA044E5BC5357
+:109E30006009781BB1ED09D927915F1B83AC36A16E
+:109E4000DF6832C13AF2F78F9A4C9C8734ECBC2A17
+:109E50004DE08BAA34E1F79F469BA6F866F0CFEC65
+:109E6000DE9E4478433699A09BE29AE265BF71C6B4
+:109E700001E16B713E7934705EAB3479F6B299A82A
+:109E800087F29B32EF1FE5D17E50717D8DC71F3F5A
+:109E900041F99F8B0E9B4AFA2AA7FA0314B7707DEB
+:109EA000A1E761245E79AF3E3C89F649467D95671E
+:109EB000E366EABFEA8E859368FF3AF4FC8E8E492A
+:109EC000651172885CDF8A38F8E87B69223F67C4D5
+:109ED00087DBAC6A630FCA6B9A2CFC3FC685EFA583
+:109EE000E1FA3F901E360B9C1530D3BA314E72DE2C
+:109EF000DF8580BA0ECB94E178A47E8D4AF5C184CB
+:109F000068DCF9261144FB085B2AC7FF5B0D7FBBA9
+:109F10002E8FF936E888EE3F78F744C1CF6F23D70C
+:109F200090DF672C621D06DDE7753FFCA9EE877B9D
+:109F3000C9FF46E49BD7ED783C89F0F5995C81A791
+:109F40008DE7CFE8727D264DE0E9F53B139C9179D2
+:109F5000C7EA902BAA5EDB36CA7936420FD71BEBD5
+:109F6000F04B0AAD63836E3FD59D3DC9B701E3F168
+:109F7000A7D370DC9A1D17BFBD8FDE370D648838FC
+:109F80001AE0F96E790F18D7DFF21544E1D297D2B3
+:109F9000447EE525A20BCB95583851DF56626C778D
+:109FA00051F9C6FC72B23B7C1E96B0BEAC13CC8499
+:109FB000D396FBB3CCC4F453E07D672F2E6D5F9A2C
+:109FC000CAF3DC043E33C5C577BF5D9D44FD86C63C
+:109FD00033C61943B959D42B57C09C41F99A6B2405
+:109FE000C60D389F8D9EFBEE18B399E2AF31DFBBF3
+:109FF000E0BFF00EEAC50AF0F2B8C6F800A9517E3B
+:10A00000F803CB901CED24BFBA2E5398F239756734
+:10A01000AC7CFED1DF30F0EB0790CEDF557DB15741
+:10A0200042BA7FBB7AE057FBF0F9AD4FA1DFC5B56F
+:10A0300066DBFD87D322CEC3CEDC7D91ED0CF1C86B
+:10A04000F34F92337AC9EA25FBF8A0EAA59C48BCF5
+:10A050007F226D6127BD07B3D3E29E47C4EE2BABD1
+:10A06000483FD96E55C699865EDEA7EB65DD0B933A
+:10A07000F9795DD2D07A44FD7999F3577507ACBC74
+:10A08000BF7F47D787AA17BF9819999F6B41BD54C7
+:10A0900073A8747249E79C2AF266CFF1C1A9D46F04
+:10A0A000A3ECEF213D3978E9E364AAEF79F34B5E45
+:10A0B0000FDC7465F4F723F322F95C9B34F02EF97E
+:10A0C00093EA7D5695F250A5FBF28EDD8EF59A4E01
+:10A0D000F43BB89E0BAE9E234FD37E6ABF04949789
+:10A0E000AA0927B073AF69958294C7AA6ADBBD65D8
+:10A0F0000CD6AB9A971793BAD6260B3F56D32205A8
+:10A10000693CF0A7317F8A74DB287D35EF1F0BB0E7
+:10A11000BDEFA818FF5C7D78EA59F44F7D2D9F9D17
+:10A12000233A36B459393F762E296C1983F35ED819
+:10A130002D8502EAB0DDF6B9C43E6A5DE8310BCD8B
+:10A14000BBEEB9E5D9040FFBF69DB4907F5CD7FA5E
+:10A1500058B9FEBC5884FB20DBC5FA9D1D9322F341
+:10A1600049F721FC83C8F881F40508F78290E309D8
+:10A170005D3EABDA273612BBD0AFED7D5A62BFE64B
+:10A180007493DF3BB8EBDFFF95E6DDFF2F9398FF7D
+:10A19000C557C67FF005184FD4E8F3C0F95316DA57
+:10A1A0001FD6B49ACFC53B17FABEDB77957BC6F0B6
+:10A1B000FE3616576FB18038B79900C1E7291E38AF
+:10A1C000062CAB919E1F5107A447710E58D660DD37
+:10A1D00046764671C2E308C6DB17D7B9159E0FF75E
+:10A1E000081BE39D57D6EAEDA56A8F85F270359E70
+:10A1F0005E0BE9754DF813715EDFF651B91667BF56
+:10A200005CED167ED3D003C3DEEBD2A7B05D98879A
+:10A21000E260C8C6765FB86680E253DD7ED40EDAAF
+:10A2200017B8FC034477606F824AEB2BDDF7C9CC8B
+:10A230009E8879FEA4DB8751AF79F9A3A966E2E78E
+:10A240009E8FA62A49C3CFFB321CEBE2E555AADD5F
+:10A25000224E6F4EF69D8FB683046F18E7AD69B737
+:10A26000F3F907DAC1968EE2483BB875DD0ED2F3FA
+:10A2700076D98B1601356DCBFD0DDC3FC94BE291D4
+:10A28000DB1606480F65A78FF513FE8AF3CDD4CFF2
+:10A290007D2652AEDB7F1BE991E2084F8ACC6BD45E
+:10A2A000987A7ED121915CB76B269AAF08D86FC996
+:10A2B0000E5F0FEF9F8A3354DAC71E9E510EC4A75C
+:10A2C0009F1E90385F6B4EF56FCD22F91E95B9BF7A
+:10A2D000E5F00B013A97EE9B06C5449FB1DE9F4E19
+:10A2E0000B838CE36C2E042F4DBB79FF2D1ED2DF28
+:10A2F0009FA61F617C61F78680FC4A23E206CAE7BD
+:10A30000D80B42611A2721D7572CE33C796E27F3EB
+:10A31000CB62F57B291F944D755C874DF1AD23FA17
+:10A320006CEE44B19F1E7B6579BA3EB27F85CE1B31
+:10A33000FD9C2FE9330B3DEDBB0A185FF31D9D39E2
+:10A34000D4A409BEC1762E6BDB3AA646C6DB44F028
+:10A35000DBE879DFFE5BBC44BF3951D7F78C44B6EC
+:10A360008BD8F9FF99F499E46E5AB3358BF84C7C8D
+:10A370005347F67B5AEF67F003147F2ED92B92AA2E
+:10A38000C5CB0F8D77973C4E72DD9CEACB7515F0EF
+:10A39000F1AC00C39EC4B87687FDFF5764FF1FE988
+:10A3A000FCDCA2F86DC4DF4D7ADD6CF1A94EB67FFE
+:10A3B0009F4AF30FAD6F74FCF5B5E9F6BA6582FFFD
+:10A3C0001BD7B74F5F9F3915F58DC64B06EE674E0D
+:10A3D0000E0648FF9A92A078133E3EEC2AF790DDD5
+:10A3E0006D39F4C538B2F7A624AF0728AF7560D62B
+:10A3F0002AB2FB2DA36F63FDFFF485BC2239629E58
+:10A40000136925ADE4BF7E69ACCBE2CFA575FC42F4
+:10A41000D723635DE96EDFABEE88BC118C755F916D
+:10A42000FE80BE9FF3EAF117F7739CFFEB87442F82
+:10A430009D27EED671B7023ED61B3B7855C6551AFE
+:10A440001CA37B1F8D1D26D846CBA6E454C4395DC2
+:10A45000B26C32367D9A0DB7E6746C4CED6FBAEB88
+:10A46000963421BDFB21200B7C169DAF004DD2A45C
+:10A47000C83CC56B55F1F314CFF81BC92EFF569E8F
+:10A48000624ED8B4DA92F2F7E72BCEBAA3F73D9F2B
+:10A49000BA55262A942BF431144E0C8ABC174CA7BB
+:10A4A0007D5333F112FF7B06D7CAF62DF5E5DA5C52
+:10A4B000684FEEFBB76D1D8B76972DD64FF546FA9C
+:10A4C0007BA7C03D43F98FD7A630EE463F27F3FE6A
+:10A4D000DFA9D31223B762C46BC0F78852A3F22757
+:10A4E000E1235F26937EED4A55DF22B90C74C97CC7
+:10A4F0004F2441E9B1B8E2D8D93EC203E8F78BD383
+:10A50000C53EC4D626CE176DAAC67E31C1E99C26AB
+:10A5100047D8C579B7C89F571FF9609C0531DC053E
+:10A52000D3F1E4021C7FC3DE96644AC3AD3FF3F669
+:10A530004CBA9253A2F81DE9B8FE4FA51D3936C298
+:10A54000A95B8353893FA1F08414F293850A049494
+:10A55000A238F1F1A922DE14D73CC587FF50D83EBE
+:10A560007D2DE1E5DAB0582FCD61C6A6BC36E07A84
+:10A570005F5B632A8D57FB6F074693BF7A295DE0C7
+:10A580009A172F4D11EF2BA050FFAC7497AEE741F7
+:10A5900013E50B5FD2F38C7D974CDCCF98BFB06D89
+:10A5A000A1EC443D28086F3FC479CD76AB4AF24D0B
+:10A5B000780E043FDA131877D61E5C0C14E7FA5DA8
+:10A5C000E095B07D57E2C06F491F060E58553A77A7
+:10A5D0004D706E87541C7F977E4F2B0F15B2C5317F
+:10A5E000FCDC982FA1FDE7941324BDE0F3DF0465A4
+:10A5F0003B5CE388E47712D35DA2EBD5AEC4B089AF
+:10A60000CE450626E15E87E91AA613785E83CE3C26
+:10A61000F6FBBB2C03E77EE066BA9CA4077920E832
+:10A6200084F6C92AF9D104A7C6EB4870AADE8034A3
+:10A6300092AEDAA908FCD06E1E25E73577D8AE6B4E
+:10A640001387EB36B4855D13403F8FFFD5363A8FC5
+:10A650001FAA9383993DFCFE2DE92F6C6B1ACBF951
+:10A66000BD808CA2B66399944AEB54797DE845B5D8
+:10A67000F422C107BAAF67B789F6A1FEA8E70EAA10
+:10A680003B443FAFD5695F92C5F64287D74378F028
+:10A690007E297CEE5AB4D7DEC77C2905B8AE5ED3DE
+:10A6A000A1079AB1DF9F568772E83EE97356FF1AF9
+:10A6B000D2CF573E5CF34821F9DB5D666F25F99DEB
+:10A6C0009EC0CF1887BF6856B745D81D8C1DC8E0FF
+:10A6D000FB8031F3D49ED9F433C2D7FDFB2595CE50
+:10A6E000BDFBCD03E388EE9AF63F5AE8BE64EDFE6B
+:10A6F0008F184F4B19FE1A9A6F765B03DF6B9B0323
+:10A70000DBF95E1BFA43BE9F18F2087F32783AE706
+:10A71000D98608393C912EEC0D06FCE3295EB5EB99
+:10A72000F67A90F6DD58EEEDB875228DBF57CF075B
+:10A7300018EF35C0A131C4F74DF01A97C6F3FEA04B
+:10A7400052417A96FFAEED4E2DA2FFA3E902BF3D26
+:10A750009A2E70667686BF89E85DDFF1B12599D6BD
+:10A760007936348EF6B921454D71C6F12343F61B77
+:10A77000634FB5CA8085FAD79E07F62B28EFA6143B
+:10A7800094DF4BEFB64D598DCFF7A24C5228AEE275
+:10A79000FE94E2EF5EB36F0CF56F78E7F3A9E4C7C0
+:10A7A0001E484FE7F57F7E60FD78E21BEA7F492275
+:10A7B000D9D96E60BF66D86901D929BE5F40FA5FFA
+:10A7C0004CF53CF6CBBB2CDD4BD82EF79A80EC1227
+:10A7D000F59FED01F5DF49F8AEC089F6C0EF4F6691
+:10A7E0003BDFD56DD21827A35F9FC4F5921BA9BE8E
+:10A7F000ABBBCCC9764EF7058AC85EC387789C1080
+:10A80000C024129D04BEA8FC883B99E936FCE5E70C
+:10A810006ED0E3869AE2C575D86539CA3E22E2A4B5
+:10A82000A81B71F4C933DB9E407B81EED428DC0F7A
+:10A83000EF0BBFFF5D3D56D5BD3E775933AEB3EE4E
+:10A8400084CCED07F57D5E58D793437A7E86E28609
+:10A850003A5DDCEFA5E733B04EF75D676A1B4B0945
+:10A8600063CDAED87E98CAB9BE502941C8F9ABBAFB
+:10A870000F9B8599E793FEB51EBA2E9FEECDF59FEF
+:10A88000B1420292D8FAE5C06F5FC4B53D7010F9CD
+:10A890001F274EE17258FF106F8D01CFC8F67EC999
+:10A8A000F023BD4B481FFB5AE5E13A1252838A4D13
+:10A8B000F577D23FDD16C0BA3F437B9F54E2C7997C
+:10A8C000FEF7493FFB4F7E994166B9F7B4D8C7B749
+:10A8D0005AB47CD29FD609B8B58DA3A7AFA58B3C3F
+:10A8E0004FB115E29E4B7EA5C7C19C003C22F1FEF4
+:10A8F0005C760651EE175A65CD82F8E73C0456CED9
+:10A90000237FA3E76FEF01FDA7E11F94CFBD7AF589
+:10A910001EC22B18B7EE7D62C4B9BF89F4696DBB46
+:10A9200004FF846B5FF74CFC7B09465EEBBEB61DF3
+:10A9300047C6A03CAB9E8BEEB761E89E7B88F7BD17
+:10A940001B9AA3EF1B7C95AEE396893091700BEABE
+:10A9500013FB07B3029D56D4DF5732FD9F105E7E76
+:10A96000C924F8847E95EDF213B71E674A843F1A16
+:10A97000B8007C8F286F67E830DDD799DB9CE5A5B0
+:10A9800039E62AA27D6E5B16C719508232DD3798F0
+:10A99000ADF9CB195F07B4D3742F649DEE27C1893D
+:10A9A0007F28BFA3AF6B9D8EE7EE0B46D33D07829A
+:10A9B0008D34CFDA9DE2FED1FA9DF1BF13A8D5C741
+:10A9C000D9F0D4C923940EAC0E45F7ABD5F953DBBF
+:10A9D00016FDBC057812189F117DCFFC4AEF43FC91
+:10A9E000C92CF0C5DBFA3846FBB519C27FD62079F1
+:10A9F00024DF0D4139487AB34E0A240B7C0B8ED5E7
+:10AA000048F75D86BEE8F765EFD6F97397AE2FBCC1
+:10AA10002E7CBFFA192948E78077FF249AFE7B42F3
+:10AA2000ABCB491F62F56A5DB399F16D156CB4103B
+:10AA3000BE8DD5ABAA217DD96EA13816AB4F357E20
+:10AA4000E932740B5CFE7F4BF77A7398F34CEBFFA3
+:10AA5000A7E4A53CD4BDADDFB1505E74A47D08F978
+:10AA600056197AA2AFEBEF5DCFED867CA7C01496A6
+:10AA70006F45DA15EE83A2F1F46ECB509E92F37C13
+:10AA8000839D13383F6EE851EC38E53A2E5FFC1495
+:10AA90007079A1ADD44EF8A2FFB8C92BA99C7F4C08
+:10AAA0002E443E4C3F2003E18DFEF6898F0790FE39
+:10AAB000A213C53752BE7CFA098C3FD8BEA7B3F8A3
+:10AAC00057E45F11E1A4917D2FECCA4EFBBD83C713
+:10AAD000E1F8DD7FBCE8F14AF2C3C7CB8A695C09C3
+:10AAE000DBE97E78911E871A8E17D97B22E2D1FD91
+:10AAF0001922DFBEC5F3FB47695FB078B7D94BF9C0
+:10AB00008EC566FFA604A4AFE805C9DB80B31DE9C6
+:10AB10003EF4248D8BF6A452BE66F1EEEF1DA2F634
+:10AB2000DA5D12D3DFDFBE287F17C5C7A0ECA5B85A
+:10AB3000D7DF7E57C1BD84730EDC537057C47C478A
+:10AB400052855F597C9599E371EF68FB2F2B29CFD4
+:10AB5000A9ED60FFD0FBEA1E0B7F57B04B020FAE92
+:10AB6000F388E7F0AF890FBDFB4E5A08E497B69E15
+:10AB7000B4F4C4F1CF467901B77161CEBF6EB7F0BE
+:10AB80003DCABD7FB0D07A6B9EFB88F369556D12CC
+:10AB9000FBA7AA67E4A04A799E03AF58483F6B9A87
+:10ABA00025C8CC8A6C37733BF951AAFFB159F865B7
+:10ABB00043EFD7E87A6EE8BD61076B74FF75D7D6AF
+:10ABC000683DBF17B42DA3F1FD7B9A57F33DA07BE1
+:10ABD000B6C7F75F861F5C4BFB528C2B6B9F8AEED0
+:10ABE00077DF907E07D8BFC7FAC95732F4F3D83C55
+:10ABF000C823FD1E0CAF19AFA03D7D7EB26A3CC4D8
+:10AC0000C93B1ED7F180118F07C3268E67B1FDFAAD
+:10AC1000DA2E5A288ED676FE99F16B79FB672C874F
+:10AC2000CAF60EBEAF7A3DF837101FAF6FB73B09BB
+:10AC30004757F608BB5FD26E0D06256A0F35917C2B
+:10AC4000FB0F8AEF3B02AF4A8CA340F77F6B757E08
+:10AC5000AED5F9B716F76763E8DE8ABEFFBE2F7779
+:10AC6000C711BAE251A33FDFD0753899F8B8048410
+:10AC70007F5A1212FEC99087115F46C6D1816F9329
+:10AC80003CD7B75BF9BEF852DD3F2D6D16DF93C59B
+:10AC9000FA8BFE517691FFDD2BE88D8DA735ADD176
+:10ACA000FDBB32D2D9DF0FEA78F813C3DFE8F2A890
+:10ACB0001C003BE5E797A8B237C86F752B347FE7D8
+:10ACC0005489CF633BD58929F1EE4B19E59B3ACEE8
+:10ACD00037EACB284F86FD43CEED8EC87DFC8D999B
+:10ACE00002AF54CD910324CF887DCFB2A2ACB8FB84
+:10ACF0001EC844BADF187BD74FA645EE7BB41D397A
+:10AD0000A4673FF23C5E49F78C6A9B857FE89B8D88
+:10AD1000E3A6108E07C6C5B5CDD620ED4F6A514FBC
+:10AD2000F87B30D20FB2BF766911E907EE1B1C9990
+:10AD300048CF723AAAC4F52F6FC3388EC32F2FFBAA
+:10AD40008CF5AA2B5BAC1BF996196F1F61EC1F6A7F
+:10AD50002E099C6A3CAF517A781F51D32EEE49B729
+:10AD60001EFA625C16D2DB7FE03FC6ADC67241A61A
+:10AD700088BFAD25A18FE9BECFE7BB6C71F1E8902C
+:10AD8000BF979AD80E6ACC3D198C57F6232E9C8516
+:10AD90007EF3ED4F79DFD17A28E14ECAC7F5ADF1E8
+:10ADA0008F777E839C1A6013E3DA4DD0C425E19E31
+:10ADB000481CB8D629EE0FDDABC749AA3F8C7A7D77
+:10ADC0002FF65D5014CFEE035BE64923EDDDF01B5B
+:10ADD000D5BABEAF2FD8B1858EE063F151B56E47BD
+:10ADE00088FC392EC6E2A21B33A3F5B4E1ED44C6BC
+:10ADF000B9FD5DB29372C4C8D75F8C26DC87F87E3C
+:10AE0000429C3CEBA7BA5EF6EAE7BE0DB365E69B53
+:10AE1000698E280D1C85FC637DE93FE908521CCB37
+:10AE20003FF8CA0492FFFA9DD1E745243F3FDFDF98
+:10AE30000AB2FCAA43763E4332DA5F3AF8CA14D229
+:10AE4000B386B7BFCC1172F922C7E2BE3C7D46295A
+:10AE50004962FF6B92C4FE77AFD2934CFBAEDAFD32
+:10AE6000B22FF2FEBC21E7BB75FD0145ECF3D765BF
+:10AE7000AA5C6F68177A613A204A9C7FA5C8F3984C
+:10AE800079FE11ED25A82FDF10B780E842D9D79AB7
+:10AE90000758EF6A4F9A989EDA938319D911EF05F4
+:10AEA00068DC4CF27B0D1B80FD881DC8BF2EA5EF12
+:10AEB0000FB1BEF4FD04C65947263C5229CEAD64FD
+:10AEC00020BFF5C0DB559323FDFF053DEE03F1C127
+:10AED0004328E70931BFCE874DB042CF13083DAEBE
+:10AEE000D2712CEEAF9AC88E63F757578A931B0E18
+:10AEF0005881F2C7B51F58F93ED0E707D6F2FE1DBC
+:10AF00002EF927939F01BFFF6A2A1F38B876323D7A
+:10AF1000FFFCE07D5773DE53DA1495AF08107D1EF9
+:10AF2000C2517F79F776C2975D0AE390A2AED3EF64
+:10AF3000D2F9EA9E56337F9B59BD77C6E38124C27E
+:10AF40004F454BE9BB9D3D9D0AEB1FE22A0347D9C4
+:10AF500019479D28661C85E3F8825C161FABA47117
+:10AF60004F9414533709DBC99F4D271CE518C6556C
+:10AF7000063DFF9C29F8D9DF91C0F9130926083D49
+:10AF800083EC28BA37B4BECE3864439B1CF5BD862B
+:10AF9000F1DEEE4C71AEB0D7D0B390A4B11EED1679
+:10AFA000E586B63D19B48EF5E610EB4943B359B4C6
+:10AFB000EF1225D0F9CD0CFED83840FC39468F5021
+:10AFC0002E4B2CC1B184DB770F9D07EAF73982E263
+:10AFD0005E5D63E744FE6E68B0738F3B5EFC394E86
+:10AFE000E73348DAD12CB1CF896DAFF3887CC6D175
+:10AFF00033C22F1E5DE89F1CCF3F06A044ECFB250B
+:10B000005D7EADE68A78E7861B3D22DFB4736CE097
+:10B0100028E971EFEE043E37EC7589FC6C694B97BB
+:10B0200042DF9FAC6F9566503C5A9FFB1E7F9F820C
+:10B03000F562F683E1FD7C6E5ADDBCBB5C8B43C7D9
+:10B04000B51E111F97E8DF018FD057BDFD1478D3CF
+:10B05000F57DDA23745E73AAD2EC14DF9989EF4A86
+:10B060006FD0FDF98DD79B19379D02D52CCE3FC4EB
+:10B0700039C532DD2FDFA0FBF911DF3B3F039BE930
+:10B080009C22F67B67C3AFDFAC8FBF02341E37F65E
+:10B09000BBF59B753C78B32FFAF9A54C1D07E6402C
+:10B0A0000EF9F310C617BE1F9197C0717A69E1A41B
+:10B0B000B83883BE0357F5EFC0A934E4DE90F71E1D
+:10B0C000C7BFA31D677ECDDF139C49800971CEC524
+:10B0D00086E39FE13F6E12F2D6CF2DAA9D824643B2
+:10B0E000EE17700716991F33E43E46E7FFFFF13D68
+:10B0F000A05C5022F325CFCAFE311E3A9FB0F53234
+:10B10000FEC615701CC4758DD3D735CE1A11DF2E2F
+:10B110008C5A1D577F87D7971A1071C4CD65479EEB
+:10B120009571627548E2EFFBAAC3625F5B5D26F62C
+:10B13000B539AD02A7AEBC490A6A12BBC3D3449F5E
+:10B14000A13FCB6C020F187A32C42F5D7FA89DF00F
+:10B15000C10D3A3E88D5A3C9D05D4EF9E65B34C92E
+:10B160004BF72A477C3FBF6ADAEBE4EE2FA73FA8F4
+:10B170006FFCEF22C4EAD1F73DFE120FE5D3BA0708
+:10B180005716E2B847F3FE388EF4A6E63276F32D72
+:10B190008F88133B1D81A37CDFA4453FEF6FC96BF4
+:10B1A000EB217E7402E3C75E57F7963A81ABF9BC98
+:10B1B000BF3A9CC0DF4356B7DBF9BBB0EAD686C4C2
+:10B1C00029E47FDB65AF1DEB95AD27CB889F95C547
+:10B1D000E23E4AAD5DDC8BB3B9FDB7107DD77B3B5A
+:10B1E000A2CFF92D3DBFA8FB063D8FF56B1B09A330
+:10B1F000A5FFF7F99B8D3A5FEABA2E664CC1A9FE0E
+:10B2000090E6AF267DEC7FFD450B1DD7D54E79A589
+:10B210009CAE886DF4A8DCEFFAE68E264AF31AF4A9
+:10B2200077643AF9F95173702CE3D2822BBB0FD3B8
+:10B23000B0FF8DA914A7FA3ABAA65A22F4BBB70EEA
+:10B24000FD731CF9358049B75B854B495AA1E3254D
+:10B2500061C7B5070E67503EA297ECB780CA7792D8
+:10B26000B3B1ACDE7D2A7912E196BDA21CC219ED04
+:10B2700032F703A527E7E6A448FA36337D17426282
+:10B280001C809E9C1B0B23DB1BFF5FDBFFD3A427D3
+:10B29000D5B69E28FB37F884BB7CFE3E3770D0CAFB
+:10B2A000F708E8BCC61521C757747F340B374B64C9
+:10B2B000A773E87C7A22413B05EEA0BA026125958E
+:10B2C000CE8BC3B2B87F3796FDF74C7DFE594AB896
+:10B2D00083EEE9CED1CF37E74237F75B00035C6AF4
+:10B2E000E0E4EF8B4BC0CBE56C5B7829C1F1825079
+:10B2F00088BF9F096728AE7336FD3BE638F21EE62D
+:10B300009B02E70C7EC8740E26EE1BC5AEA75BD76A
+:10B31000C7599AF03B041DE87EEE6C08F1B9FB3585
+:10B32000D0A39FBFC75FC73CDCF7D1B9DB35683B13
+:10B3300089CC8F20F79F4FEB91E3ADA767298B193D
+:10B34000CA9C449F14CE307D6DBFF275F4D36D4D11
+:10B35000CA57DF35D0F783E2E1734B6FFB1BEFD3A6
+:10B360007D6249D3F8BEB197BEC7A67D4E58E91D90
+:10B37000F2631300FEDDB3E637646FC6F71AE00729
+:10B38000BEE711FBBD062DF77CC6F03D35E3FEEDB3
+:10B39000CEE00A95EE6FAC72DBF8DFAD29B28D9B83
+:10B3A0004E79CA87D2FCBF21BDFA406A9EC4832869
+:10B3B000C1198C6375BDB283369BD62F69C6F7223F
+:10B3C000C0FA32F4EF0164007FB763B78AEF691EF9
+:10B3D000413DB4A5B2F6AB740F1A1E2E55092F6F5E
+:10B3E00071D9BCF45DAE95E8B50FD3DB6813F72FC8
+:10B3F0008CFB6BB17C6CB419794AAF8D7176CC77CC
+:10B400003E77DAFCFF9BE8BF3FA924937060FECB38
+:10B41000F33D7C3F29C15877898DEBC3F71A193763
+:10B4200036D17D6AA4AB311DF81EE2E1A49C14BAAA
+:10B430001FD5D825EE5337A607D87F9BFD12FBF307
+:10B44000C6CED24E8A07830E0BDFAB6E74F934AAD8
+:10B4500007D22144FE9FF83EDFE0BB6998EF21FD53
+:10B460005E5091EDD75751DE7F9A1B4AE9BD696165
+:10B470006D12F1C0F81E06E5E019954ECFA3EF7BE3
+:10B4800081E2E4FB17861C503158999DBA7C0DB9B6
+:10B49000388DEFF83525EA3B7E435E8F240AB99854
+:10B4A000E926CC447E57A57163E561F0FDBF008FAE
+:10B4B00040AEB13049000000000000000000000074
+:10B4C0001F8B08000000000000FF3B24C3C0F0A356
+:10B4D0001E81EF4A313030F1A28AD112EFE364606D
+:10B4E00010E062603005E2FB3C0C0C3380F44C2031
+:10B4F00016E566601003E21A20DE0DC47B80F819A1
+:10B5000050FC3910EF00E21B3C10FDBE4C0C0CFE51
+:10B51000401C08C4C140FC958181E11B03F1F67316
+:10B520000A33304C1547F02F03D99F24E9E7FFC1B8
+:10B5300086430CE96BDF71A07DF3AC107C46207B69
+:10B54000BE15AA9A0556F8CD588826BF088DBF1893
+:10B550008FFE720354FE5A4D34B3B581E90949CDCB
+:10B560003A4DFC6E41C7AA40FFA9013100ADF15F21
+:10B57000CA68030000000000000000000000000096
+:10B580001F8B08000000000000FFE57D097894D5BE
+:10B59000D5F07DE75D66269999BC816CAC4ED844A8
+:10B5A0000B7442421A10DB618B6811834B051798AC
+:10B5B00008644F2620F5C7DAEFCF40005151438B86
+:10B5C000355AB40304051B34D88041020EE0822DA5
+:10B5D000D5D86A5DDAD2A0C81A93801BFE5DFCCE76
+:10B5E00039F7BEC9FB4E2682B5FFFFF5FBFEF8F822
+:10B5F0005CEE7BF7B3DD73CE3DF78EE218C7948B1C
+:10B6000018FB12FFBEC798DDC6181BD79D32562304
+:10B61000D24A2DCFCD58D003FFCC62ACDCAD85979C
+:10B62000A7333665871AF95E12E43748613BE46D4B
+:10B630007B9D54DEBE9EE7236ECDCFA0FCA33AC80F
+:10B640004BD0DEDEF2C06550DEB943661BB1DB9144
+:10B65000713696C2D83107E37F5990CF66ACC0C926
+:10B66000B3E51BF6CDC5F6454D76E684FECA7715E3
+:10B67000CEBC0CF28507558655CA372FD3FA43BE88
+:10B68000382C3560BE63329F5F68A71CDE0CF53B2B
+:10B690003C2D2937B8183B55E5605E8DB16A774B74
+:10B6A000CAF5A3182B096FCFC57625F5920F973AE7
+:10B6B00065C7E697FBE1BAB64A3EBB97B1D22DF11A
+:10B6C000CC3B92CFE14BF8FF58A31CF91E942F8678
+:10B6D0007532E8B790D5E43219C75FAB79DDDDF09C
+:10B6E0003B55A5D33846BE7C2B8C03ED2A9E967C19
+:10B6F000B8C40A1B0B34C0F8EDBB9CB337B9707DDE
+:10B70000CBB4116E5CD7DD1AD62B0CE7EF747A71CF
+:10B710007E1BB45C282F59BF412B18D5DD5FE996FD
+:10B72000BED679D50E4D0D98CAA3D353558C794703
+:10B7300074E74B18F33740BF4C096BB346777FFF74
+:10B74000802532968CFDCBCCEBE8EE1F2049DF4301
+:10B750006FC13F015EA13D6E82AB81B7C53AFCDB94
+:10B76000DB8DB7B3BAC0A3D2996DEEDF481F403C62
+:10B77000C07C6A104E90AE11F3F34C649314E8DF72
+:10B78000E367BAC47A5F8F91D6A82C9FC1580B4249
+:10B79000A3FDCA78C86B6C11F331F69315D9FEA9D5
+:10B7A00090BF9F05E6E2BC57488122C413630D6930
+:10B7B00048BFAB24361BD7FF039C3494AFEA07F491
+:10B7C0000970AF9996BD4996C4DC93305FF0C4BD53
+:10B7D000E9D44F21F5A3423F43CFDF8F9E9B63E91E
+:10B7E00047CF2D32FAA9A47E9C17D64F4DEE04EB1D
+:10B7F0007C724B8C7EEEA47EDC17B62EFD8A89D639
+:10B80000F95C5146FD244EF5B100D4970D7A602DB8
+:10B810007E19CA5DF58963EF6566BA98BC12F9DFD7
+:10B820000D5C62A68B849C380B1D26FAFB58F2D067
+:10B83000937EEC5B220F834412351A5FEBAF915C71
+:10B8400098D4DF41F93BFABB482EDC312170B10EB0
+:10B85000F3C0B1593FC86B816FEB31E81AE629B1EB
+:10B86000344CBD364CA3CBEF56391C260FF8DB8881
+:10B8700023D03E68EB1C9108F9F5D2A45F205C361A
+:10B88000331BC1274E6695582FCECE483EDD9D9E78
+:10B89000BD296482D3EA41807FA9BBDFD56A200D30
+:10B8A000E96B2BBB2184F4B66A10ACA73F634F85CC
+:10B8B000AE8F8414683FA8200DE169D780BFCDE327
+:10B8C0006B30FE281AFF191C77078E3FAEE7F8F69B
+:10B8D000213996F11D838B2CE33B34181FE87D172B
+:10B8E000BB558C0FF09BC0D8F3A15B687CFBE022BA
+:10B8F0001AFF6E8D1559C68FEB1AFF051CF7A5DED2
+:10B90000D63F648275FD834BACEBD7F8FA5F650BCD
+:10B91000C5F871B4FE5F8716F0F50F2EE1EBB7F3B3
+:10B920007EBBC6F774C1FF751CF7ADDED63F74A2AF
+:10B9300075FD179559D76FE7E3BFCBCAC5F82E1A27
+:10B94000FFBD50195FFF456534BE660FF8908EB499
+:10B9500001719561189F0D0486482519E5A7746447
+:10B960001FC6A0FD3A3684E070471CA7BBCFE2801B
+:10B97000DE5CDDF28E8581A3409E55089A2FAD9F37
+:10B98000A4A19CA572907B0BC5541734C9B4DFB039
+:10B9900075F6F070986F7B931CC2FC827597876573
+:10B9A000DAEFD8BC3C6CA7B0087EFFF0A1D11BCD6C
+:10B9B000EB8A4E17D6A8C75A2D7CC4E7139ACC46FB
+:10B9C00056C2FCA621118CEBCE1F0339CA407EBEA5
+:10B9D0000F7214D3E32A8C07DF8F829C659A996FCC
+:10B9E00096F17D3CC4DE1C99827282FF1D5338BCE7
+:10B9F0008F2D91C208FFCFD62ED2503E2DAC890795
+:10BA0000A077CF2328F0D4B9CB1EDE28113CBD0887
+:10BA10009F1B891519FB33A0B51F80B6B0B6AFA523
+:10BA2000DD2D2CBC320DEACF5F933F4887F5DF3C1C
+:10BA3000DB3E56C6FD83F907D8888FD9005B0E63BD
+:10BA4000B31BD7AA032073E36CF5FD5653FB3901F2
+:10BA50006BFEE6226BBE5D0DAB36D4378A25B60190
+:10BA6000FABDB5D25A6E8C9328F5E17815E3FD2026
+:10BA700085CFF7564CC7E2679DF03A57E76D8DF9D1
+:10BA800004EF525984F6CBD66446F84FA67A019D4E
+:10BA9000AF3B7ABE7355873F0FE633F74E99E019F7
+:10BAA0003DFFD6BDF17EDB18486B3F569104A3D70E
+:10BAB000133DFF794BA3D7A3931E961F8AFECEE9B1
+:10BAC000249A9E824D93FA1E35D52B6FB8B2EF5152
+:10BAD000137D956E9965C91787E758EA17D6E65B17
+:10BAE000CA17D6145BCAE7AF5E64C9E787EEB4D461
+:10BAF0009FB77499A5FCD6CA7B2CE53717ADB5E482
+:10BB0000E7041EB1D4BF71F6064BB96DEF25D720FF
+:10BB10001F55BF2533DC373E751D7B00F5C14F5DDA
+:10BB20008A0FF171A22A8DF8E0549597D2F6A64CAF
+:10BB30004780CBC1025471162E6B08AD9E88729956
+:10BB400091FC2C5EB633141A08DAADE425F8C9B5B9
+:10BB50001A8B00094BAC4F171D77CAA6F2D6F39487
+:10BB6000D702A367F62C975B637F0F6ECCBF08E507
+:10BB70004E6FF200FE06E03ED721F6F7E8F232897A
+:10BB8000E599BF33B69CF8FC9C90B3651A9707659E
+:10BB9000CFF69BCC3C988F8CA8FCAAF11A00A82861
+:10BBA00027513B4F467A002EB0D0CB500B7FB7EDDC
+:10BBB00093695E152813C6A3C8C95B23A19C891C81
+:10BBC000187CDD689C87FF7E09F9AE2999F6F5B6E9
+:10BBD000AAE97D8F2A889F3C4A4F54CDA6F4585538
+:10BBE00080D2A3554594BE5F5549696BD5524A0F23
+:10BBF000578528FD53D56A4ADFABAAA1F49DAA5AFE
+:10BC00004AFF5015A6B4BDCA4FA9C10F5DF237490E
+:10BC1000E8ABC2AE809D87F267C55A5640DD16E29A
+:10BC2000735F1AF2F959D76723501F3FFB8E9DA10E
+:10BC3000BEDF1BBCA2E9AD773CFA495F290803FED1
+:10BC4000337B963BE3389E9C36369D813CBA67F841
+:10BC500013BEDB46515E4192810DC937CB1DA3DF78
+:10BC6000618CF0753E3C317FE7986B011FC71EFD6C
+:10BC70006B36F67B4EEC7F710764DA875964930F5D
+:10BC8000F165821BED6B9D3B84BC3F0FFC3EEA825D
+:10BC90005FCB6006E9044927FA3BDB68670AC2B15B
+:10BCA000393E0CC4CFCE1EDCE4417E5C9C66D38F53
+:10BCB000C68083919637A4EB2EF3FED364CD9FAD5F
+:10BCC00091A637903CF6265C3F1AE94AD78F0E437F
+:10BCD000FCA7516AF4B3384DD38F02BF9EDA3234D9
+:10BCE00081EFDF61BE0FD62712BD825D48F5FFD51B
+:10BCF000F3E9AD1F633E8C35B20F1C280FA06CE832
+:10BD0000F9ED9D1E78573ED1F2105FCDEA67A82F5E
+:10BD1000C4C1FF5F0EC17E15CA1BFD061BE490FD6A
+:10BD2000DBF8BDDE321EB4F31A3637B6EB9D6E1566
+:10BD300076CCA02B90571A1ACB64273A75EBBE929B
+:10BD400068C9079BFAE9967D06FF01FC0F82524104
+:10BD5000BA291354D4A1B8564B30BF23283F012F22
+:10BD60004189D72B77B46A012F91630BEA19B7E5A4
+:10BD70001874E7BDF18F20EF4FFE4665F762F9DFDB
+:10BD8000605650AE1AC520F76C909F2F72B735964B
+:10BD9000CE40B977D2C6F7F9052CCF83464F11AB09
+:10BDA000C9463DE723669B8EF4FF11FB9D27D364B4
+:10BDB0006FF86C1AAD73FE6AEB3E0BFA99255F586B
+:10BDC0006BCD17B06B5390DE0BD6A92C2C215F5A8C
+:10BDD000CBBD369DFA2D6495ABC8DE417B05C6BD53
+:10BDE0004D67CA00985FF9738F65E743FE3B36AE37
+:10BDF000A71BF67B711F3EFF92A4B0E687F20F1AD5
+:10BE0000337F7019C3F6E15528A7426EE6DBCC7A82
+:10BE1000E2EFEBCE3F7ABEC67ED2C38F20E6216F23
+:10BE200091FCE11876DA349B24F4AD10A537E0BA22
+:10BE30004D7A6BBE8083912F8FCADF1995FFA7E9DA
+:10BE40002D8959E8ED8814C8B72573FA427D41520F
+:10BE50003AB5C037E93FAD47FFE5FFD2FE0742FFE5
+:10BE6000D996FEEFFC97F63FACC7FC57C6EABFFC7D
+:10BE7000B96D3B43206F4A9E79C8C3601F3AA9D46D
+:10BE8000A4F800EF659B577A900E4E28210FD2F34D
+:10BE9000C9B03C3D163DEC467A203FA2DF25A15DAE
+:10BEA00085FF84FE4F3D75DF4CDC673EDBACEA640A
+:10BEB0002F6DB147ECC0AF158DC533D818CA1FE13F
+:10BEC000F9BBCFC8986FB2D267C9930FA5A0FF0D79
+:10BED0002845D81311D2972AEA3ECCC57D28C83A06
+:10BEE00089CFA2DBE1F8E7FA907CCCD7127A96C32F
+:10BEF0003C49CF0F0AB8041BEF3B23A3EF93B57265
+:10BF00003F6854FD22A1FFD4DBDC49C7C07462DF67
+:10BF100061DF417969C08385B9FE53BDF5E13147E1
+:10BF2000603E6D75BFF1482638197C76B661FE2FEC
+:10BF30009EF7F62E8FDB859DD7DD2E4CEDBC4D4256
+:10BF40006F6BE669991AF1A05E5CB641F585E07306
+:10BF5000D9B64D4F3C8A76EABB76DF70E8BF74DB1A
+:10BF60004B7F9800F9D2ED6AD20CBE0C9794D28D1B
+:10BF70009720FCBF746C371E4A7EF592E61DCDBF3C
+:10BF8000FFB84F373E4AB7EFD3D8E89EF098D2B00B
+:10BF90004F6B75C5C04BC3915CD4AFAAB77EAEA141
+:10BFA0003D7972AFC452D363C073C34BA427209CA6
+:10BFB000088F024F5D788BAA1F04BCA03C37F01499
+:10BFC0005DFE80903FD89F7714D1F3D3CFA35FF964
+:10BFD0003DBB0FD75FF4F4ED1E5CC771A592D3F59E
+:10BFE000632B53FC306E911A4AD129E5DF8B1EFF7B
+:10BFF00021D15BE11B3F4CE1F6A0BF9F8DF6A6501F
+:10C000003F5CDFC2F537D0FA0A5880E8AEE8313934
+:10C010002F0CE9A70A9BBE3D065F64C89C2F8E6F5C
+:10C0200004850BD6771CED12F4B3FE4E0E6F267FFF
+:10C03000C82286FCFF43C33FCE1653FE5307C79367
+:10C0400043B609BE026DCF4CAF7577B7207E4E0D5B
+:10C05000F2A7A21F2DC894908087F425F42BBF313E
+:10C060002D95E38779956CD10EF48029F81DEBB7F7
+:10C07000A87EE7184B3BF6657AF7F84BC4F830EF2B
+:10C0800038DCBF8FA7B0A28618EBBB5536F81EF67A
+:10C0900071137D99F89BF37BDD3D9CBF0D7E0FCF27
+:10C0A0009A8EE59FBCC9F907DBE1FE08F38AA4522A
+:10C0B000F9BEEB259207761689C5D775AAE06B6B9A
+:10C0C000B94127306F454A30D10BF6DF87E04FFE8C
+:10C0D000B38275D0CE242F83389EA7677F06DF16E4
+:10C0E0000AFE1F255BF99FADE77CDFBB7E15A27DB5
+:10C0F000AE4C0D3FF128F22BF067C88BFCAAE6E1AD
+:10C10000BA4FD71FF8C34DC0A7A71B0C3EB5CACF67
+:10C11000683E2D7A76B384F419CDA7A78B401B898E
+:10C12000C5A7F03D269F16B5FE3F959F06FCAE8F36
+:10C13000829F210F7B8363B43C3C63F3123CA3E5F5
+:10C1400021FCBDC9B27BD29F417706BD95FCB2FCF4
+:10C1500022F217187469D05D175D1A74D7C3FF6295
+:10C16000815F74F960A405A093BC5D2AD95565CDA3
+:10C17000FC3C0CDABD3C208BE0E4A76D8CD5BC3CCC
+:10C1800020C99C0F47E51BA2EAFBA3F27951F503F6
+:10C1900051F94A4BFDB2A6031A23FC472CF5EC4B90
+:10C1A0001F651FC4B0878CFD26D878460B215D0C17
+:10C1B000ECD450DEA9CB410545FFE01E99ECC50E3D
+:10C1C00080F12A18A7A33E3D1C02B9B1D2C9EDF0F7
+:10C1D0000EBDD3D307D295893CDF99ACAD42B96788
+:10C1E0007CEF74723F47475EA727D1E4A738D22C73
+:10C1F00093DC6E0DB3E9B1FC20B0A310DE5B596F88
+:10C20000E5DCFF394D760D5E8AF6688DEC431377D9
+:10C21000C1B21B3DE82AE9681E7ACD6CF8BEF05524
+:10C22000998E553AE23C63705E2CE457FA99EC899A
+:10C23000132CF4B389E8CF6CE676C5823551FA0841
+:10C240005B43F454E05AA2A13C053BE07DAB3F9731
+:10C25000F34589E8AF68BDB5DC688F275A68DF957C
+:10C26000D459CB03C23EDA65F04906CB2039838628
+:10C270000FDAE7422E4F93475D331BF0D1715066C2
+:10C28000789E79B659267C9CADE7E7972C944CFCB8
+:10C2900056C13A491E1A706A437ED27A97576D3B4F
+:10C2A000FE9C7D17D2CDCE3F8EF939A46D3BDF1DAC
+:10C2B000B11BF3CFBD3DF88FAC67FD297B9DE43703
+:10C2C000EED8EB267AEFD8F3DBC177617E979DFC41
+:10C2D000751D7B3F1F83F4D7B1DC5E84F2AE631023
+:10C2E000B787AAF77C3EA695F6D71584B7A3B2C642
+:10C2F000F5A3E6BF1E9692308555A1DEB0379EF8B5
+:10C3000029F8BC93FC0B1D7B3ECF0EB8FE75EBA944
+:10C3100010E7391D6E36FB599C5F22F78307778F34
+:10C32000DFB40CCFA31BF769F3A17CCA0B7F1F837B
+:10C3300072B4E359AE0FB5ABAD8FE3794587FCE13D
+:10C340003215E0DC8E4CD59FB1FB94119343A36270
+:10C35000C1E5EFE437B95078680AB74FFFFDE12136
+:10C36000F9B9BC73871D12AEFB8BC37F44B9B0D73C
+:10C370004E7469ACF774C332D257CEB7EEE1CA7FC0
+:10C38000173AB8D0754B910B59F7D47F737CFF5A8D
+:10C39000F6D2FCA2F9A0279DEFB983F2DBDC3E9A2E
+:10C3A000EF05D2FB82FF69787F16F0EE39FFBAAB5A
+:10C3B000FFCDD7DD3BDE5F9D2BF0AEE3797FF085CF
+:10C3C000BFD3FCBEAE9CDBF4DF94EE0DBDFE159B2F
+:10C3D000F7CD0CA83F9DD5B850B1B8B27CFFAB19D2
+:10C3E00050FACAC0038938DFC951E73746FAA6C2F6
+:10C3F000EDA6C9928DEC419628097B90DB51038410
+:10C40000FE30604901E9210306DECFF506C5BB0E0B
+:10C41000CF1F5F193CDF47B1146CEC3B01CCEB97AD
+:10C420008BBCD59EFCB9C4FC78343A60F0F70FA2FF
+:10C430005E3B70A04C7A2FA4A4EFBEE899CEBF97C4
+:10C440006916BBE74AAFD50ECA4DB2DA4B53457FEA
+:10C45000D3189FFF3497140E031C260FFA6912FAA3
+:10C4600047270F579904F95C165881F6C55497B5BC
+:10C47000BF063CC319F7CDE168570D380E599787B1
+:10C48000701C24939FF4BC70C47913DC32C2182F43
+:10C49000C3141F87639F721FF99D85BD4D474D9043
+:10C4A000575CAB5A909F15B497391CC8CE36ECE553
+:10C4B000DEE0CD84FDAD88210DF82B0365BFD3DA16
+:10C4C0001FD9DF065EBE2E3E0C3C7E53BCBC1B85D6
+:10C4D0009781AE450AF2EB74B417FA62FD0C9E1F09
+:10C4E0001852E8DC4DD80B57781729A4F70CCC501C
+:10C4F000105F858EA6ABF01CC4E193681E17B7D9F8
+:10C50000687F70644904F791B50AE5DFB0E9E3108C
+:10C51000DF332F7BEEF49D0CFDE67E8DC73DE5F10C
+:10C52000F38FBF7DF9E5448C1714782C84FFAF4658
+:10C530003FFF7A168903382D545828A10FFABD25DC
+:10C54000F6BEC5EF6DCDE3DF7753BAFB395FFDDE95
+:10C55000E4CABF3A7D0EE4D8FB00F35D980EA3E178
+:10C5600015B35DFD9D660EAFE021161EC2E32AE401
+:10C570003CD339E11D82FE9FFBD3B39968D74EEAC5
+:10C580001895C0E5EB30B21782C25E38CBBC093ECD
+:10C5900017CAD7A10974FE795076C78A2BDC2AEC1A
+:10C5A000ED5F627C09A41D75AC4646FB8D75921F3C
+:10C5B0003754E7609B63C4B7E4AB869F4AE00DFE47
+:10C5C000E46C3C8FE1E32F84A60966BCB5CD38A9A5
+:10C5D0008CE98907FC7BDF741EF54DE18BF63DC2CB
+:10C5E00077ABB335372F86FCB85DC06FE6FE2FC83A
+:10C5F000FF7969F3061BD2EFA57536CBF96AA92A34
+:10C60000ECB1B16C2CCE6BE67EA73B0BF17250F611
+:10C61000613C67B0F98C1688712E180D4FEC1FFD28
+:10C62000E95B559DF86BB7DA301FE1BAFB2307438E
+:10C630003B7A9756531A6B9E03EC7C9E0B59C3EDC5
+:10C6400063D2FFFDE03BA9C315998CF6671D137EED
+:10C650008F68FA6344C767B7B030EEAF68AFA25CCB
+:10C66000385BCF687F0790DC8F7637F0FBF7CC7EA6
+:10C670009C8B9BB6FF12F5828A6649C723860AA562
+:10C6800055433F6DB02951C67D38C36BC4BBEAA387
+:10C69000AF37F1C5565521F81E98B0FB661CF7E37D
+:10C6A000368DA19EE27FB1D383FBF8C7CD99C40735
+:10C6B000BDADEB5755ECAAA948372A9787D1F4307E
+:10C6C000AA3ECE92BF4C0EF447FE9A696F5DE28B94
+:10C6D00081BFEF6B923817BC40F916FEFF4CBEBD10
+:10C6E00069C8B7809C67E2A3BE5A0FF9961A4BBE81
+:10C6F0002D96BCA908F7C57B86A6225E17BFAA2681
+:10C70000C7926FDBAAF839E733224EB9A311E4DBF5
+:10C71000B74DF2AD11E45B8C7890BF5FA87C0BFF46
+:10C72000D7F0DF36946F31D6AB6B56F936A6F908E1
+:10C73000C9B7318D364B3CAF5D3B9F7C9392AF4781
+:10C74000FDF8A0EA8B8F413FDB843EFE8C884BC412
+:10C750007150CEE56A3A8D7FA172EEE20B9573FFC0
+:10C76000457036E4DCE21D8CE29C7BD22197738B12
+:10C7700077819C93901EB99C5BBC8771BF5C947C55
+:10C780001BD943BE31AA5F11E1ED834DE90FDF02F2
+:10C79000FD8DF5AB3E07D41FDB2DEFC699E55DAEF1
+:10C7A000A610DC7AC8BB831726EF76087907726C6F
+:10C7B00008CAD768FAF0355BE3C1778F3F5EFF2B7D
+:10C7C000E497DFCA74DEF8868D9F0FBD36FE7816BB
+:10C7D000D2D763623E8B84DC6BAF0A51FF535EE4B9
+:10C7E000EB2B77F138F18A46AE1F56D44B612FFC04
+:10C7F0003377C2171ACEBF788FC452213FCBCEEB0E
+:10C80000B3278DF3323623C3440F0B724AC9CFBF0F
+:10C8100040610EF4E397BA724FA2FE5B9AC3FDFE2D
+:10C82000A5E27BF1ABADABD0FF5DFC8844E7A5464C
+:10C830007CAB11E7DB236EA27919F977A3E32766B6
+:10C840008AB8A999BF94C21B62C47F946EB1E67F77
+:10C8500022F86F96DC4AF062AFCB31E3388C7A5D18
+:10C86000703A28E05427D37EDA0527809B37BD270E
+:10C870009C00D3333252BAE152FC5B586F56EFEB57
+:10C8800035E016BD6EC37F5D2AFAE90D0E069C7B6E
+:10C89000AC5FC01DEC029293D1F058A775F9B53387
+:10C8A000314E09E886E44CE8D70017182F6FD27094
+:10C8B000CB7D974705FD64D64C9A82E10CB330AE30
+:10C8C0001CCA0B6A17BDDC0FE031EE1DEF58DC4EC1
+:10C8D0002F9B600FE039EC566727C941830EDB358B
+:10C8E000AE071C14F0DDDDBF7232D9F94D928E7A9D
+:10C8F0004830E224B80601AE78FF28A870FC068113
+:10C900001E91FF0E3CF21987E31EC98BFE9D5C63EE
+:10C91000BF42BC40FDCC668E97605822BC64B14ECD
+:10C920003A7FA9A8957C11845FD306829F219FE15D
+:10C93000CF65C693897E9558F44B954CFB65A9A8A5
+:10C9400037D35EF307A4E7994FAA6C03811BFEFB64
+:10C950002A7A3E4F1C50349EDA04BCB6213C5D0856
+:10C96000B74EAE7745BEA0FB504679500959E03925
+:10C97000E5D1735F09AF7106BC908E51BE35E7CB30
+:10C98000982F689258DFF49EEBC5F35033BF17EF32
+:10C9900039C2FB7F4CF2B118EBBE60BAEE859E8BBC
+:10C9A000806EF1BCA437BA8E86533BD2F3B7BAE996
+:10C9B000F93567E7A14CA4E73D12F74334275ACE77
+:10C9C000353D761EF7B5D509740FEBEE7C55F56D48
+:10C9D000F4C690CB82EED17E30DF37BB041782F1F4
+:10C9E000A25B1C14EF47F318C2F553B37CDEE66478
+:10C9F000C9D767F5DEBFDB2EC58C2737F423233F6D
+:10CA00001AC7C3F8F926186F64F778D1FB83E12FB2
+:10CA100038DFBAFADBBFD9BA8C71BE6E3C5490B520
+:10CA2000105E8DB8A82352E0472AEA73D3254BFC49
+:10CA300015CC5CC8AD6FDC7FAA96DC7BFF2C4DA7C4
+:10CA4000FB74B7EBC6779DE8334F67E27C6FE2DBA0
+:10CA5000B8EF7FECE7E7985936F6D644DC3F26ABD3
+:10CA60000CE9EAE3432AF9A13F9ECAE36EAFF9ED70
+:10CA700001055D3ED7F0983876CD3889ECAC37B0FB
+:10CA8000EBF1A8873B987F04C12F13EFED65D4D558
+:10CA90004CF1025F8FDD12AEC6D437A533E935C441
+:10CAA000DB249921DE5AFC7DA7B8207FFB872C036D
+:10CAB0005DA0A01F50FBB1075932D69BE04F263333
+:10CAC000667CE3276F5E07F3187F48F679A1DEAC3A
+:10CAD000032E17037D7AE47A1B0B98E0358185AB32
+:10CAE000D1DF34FEA8FF3A9C7711E83B784FA4A829
+:10CAF0007943B507F3EB256A1F0C05723DB09E6DB7
+:10CB0000B56772BF857201EA6137C1F5BC5EB04E90
+:10CB1000F261887241F35A8A2F2AA893E842E1B65B
+:10CB2000B0C41CBCDFB003FADDB61EDA67E1FE0557
+:10CB3000EDB1DFBA336F5E877207E649EDEBF9B905
+:10CB40007C01B4F322BFD42DA2FE8AD74B0CEFB3E5
+:10CB500014D5F37DA9E890EAC3F2C67D8FD07E3B61
+:10CB600003C6EB978EFB50642ADD0BCA9474BA2F70
+:10CB7000191A4CF8EB601C7F6CFA20F20B52BCAB1C
+:10CB800097C0A098E363FE641F42F2B3C0B74CEBBA
+:10CB90000BFDBC96939C6E23BA3A43E7ED4701DE4A
+:10CBA0000180F71B225EE540CE075AAB695FFCC2ED
+:10CBB0003E949F9B344DA2388E852C8FE238668E32
+:10CBC000E7FAE6EB973BC3E8E77B5DED1C88DF0FF8
+:10CBD0005C6EA7EFEDDBB81C6E1FD44AFEF6E3EBEC
+:10CBE0005586F758AAD7CB242F8ED7AB743F567EE5
+:10CBF0008CC731146EE3FAC781F5BCDFE3A8B7E157
+:10CC0000B9079643BE70AB11E7C0E5B4617F16E883
+:10CC10003CFEC290BBE562DD3DF6A175CB3424D964
+:10CC200068795B2EE471098B90BD1C2D77CBF11CCC
+:10CC3000DD837C191D27E6EAB663900E225F105D46
+:10CC4000571C5219DA31D2076DB91497B647A2733F
+:10CC50008BF1CD921FE31A8ADEB18749FF0EE7CF31
+:10CC6000FB11EE2FEFDA19862C1F433C809CCAB1D2
+:10CC700077FEE9A7F0FDE41B0E8C0802BAC927B8BD
+:10CC80001B71BE599B793C4FD61BEB52F03E2F9B3C
+:10CC9000DA97E44061ADCC0226397152F25F771326
+:10CCA000DF1F74D4770C7C66693505B8BF7ECBC1B5
+:10CCB000F755EF66156364D8EF843D04F6811FF5E0
+:10CCC0009BE25D6B5334131D14EF599B22C3F75540
+:10CCD000221EA61AF7576857ACF1718AF74AFA066E
+:10CCE000D338463F46BFDA2EDE6EE81E9EF6D67F6C
+:10CCF00031CE8FD6F9A986F222BA9F1EE3F7D24F22
+:10CD0000CEEFCFAD93605E39AFCB14AC9EF3C18C48
+:10CD1000A1E6731D2335FCCAD96FDA98DF04BF9CE6
+:10CD20003FC531BF09DF8DE380EF017F5737496190
+:10CD3000A784F9235A7916E575E4F30AE17FAE98E2
+:10CD4000CACFEB1A33DE58817C3F234B227A60A195
+:10CD500080D63789F4352FFAFD0BB378FB42688F04
+:10CD6000FCD8F808E74F90135E942315EBD7E652F2
+:10CD7000FD3AC98BFD376EC8277DA4284766545EEF
+:10CD80007784F4A3A2A62349C8C7C0B7EB501FA855
+:10CD90009868D7518E1BFC68F0F7EBE23E2B73E8E6
+:10CDA000A3F17EC6FF46E68BC1D7F2212ED783F5CD
+:10CDB0009C1F83399C5F5FDFA6E20A2F84BF899F97
+:10CDC0008F6FE1FC2A3F76432EDE872FDCCCEFC34A
+:10CDD0001F583F45437DFA7858A2FDA6277F73BDB3
+:10CDE000359ABFAB25BEEF7D5DFDD2E06F838FE14D
+:10CDF000EF6A1CAF0CF814EF4F46F3F54CB5E10F9A
+:10CE0000B7C37CAF791AD603F39DF2DD3B3DAD2667
+:10CE10003909F914CC17283C9ECB902BE50A8FFBDF
+:10CE2000FBDAF38B1A3F6CB7FA477E674FE4F1EBFE
+:10CE3000752AD1FDF9F8B3079F5D207F5E285F9DBD
+:10CE40008F3F8DF1E53DD67E7E27E82DBABF7680F7
+:10CE50006B04E0FA4AFD268AF3FDE8A92333113F6B
+:10CE6000A5BB81CE91BEEADD2C82724E09D37E55E0
+:10CE7000D228D33D01A644B2AF739BF998C76D95F4
+:10CE80003EE3267A2A79D61E9E01ED4B767E3086C9
+:10CE9000E2689677525C5AE829A12F875AC7201F6B
+:10CEA00094283C7E2C5A2E041CDC0FD7B62B7E36E1
+:10CEB000AE4FDAC2DF8F2869B851B59BCE256E74AC
+:10CEC000A8463D3AD70D011DE3FD5D9C9FF9DD02AB
+:10CED000236EAC6D2B9713254D2AD981255BB6B7F0
+:10CEE00063FC70C93B76F27705B79CA1FB10539E9B
+:10CEF000D946FE9460936C397FEB11B7B9458ED853
+:10CF000031EEB0B19CCE1D217F84F20DB1E397CFFD
+:10CF1000175F58FACC9E9D210061E9AF9EF4A07C7A
+:10CF200039D5B2D98370877EBF326EBA479C66C34B
+:10CF30003D5F19A7790AFF018C738F43D835469C52
+:10CF4000EB96BEA447C2FCB2F3629C7374E9E5DBC6
+:10CF50003E7D1CEF11B43D7BFA719C6FD93F3E7E44
+:10CF60001CE3C1D85E27ED77C1A7DEA2386CA3DD34
+:10CF700026B1DFB56F7D92E2D7DBDFB5FBB0B7F648
+:10CF80003DC707633C60FBF62F52D06FB964CF34C6
+:10CF9000F2EB2ED9312595C5D82F8C14E9367C01BA
+:10CFA000F1F3D1F83AD07880E2D63E027CA3FCEBD4
+:10CFB0008ABB6D28E771CC5E116F5B1FFB9E428FB1
+:10CFC000F8DAC6EBAEB91CE57E23D71FCF1B67FB93
+:10CFD00026E0F1DB1780BF7AC32F101B7F1FE13FD4
+:10CFE000004FFBA2F0F769E3C25F3C8A658D7D7B51
+:10CFF0008DB38D5C00DC8C7B100F38FC871CC988DE
+:10D00000E75F525C33E26D8617F79F4F07E3FD91B0
+:10D01000136AE75CBA5FB8C7AE63BC68C99EB789DC
+:10D020007FDA77BC417E6826EE23B4B3AE3F1E3F65
+:10D030002E8975D6B9797CAE803FC6EF7A3DF45D16
+:10D04000C4E9723A36E2777B8BDB959D5CCF36EE96
+:10D050006794D7FD51C4C376E34BCA413C1DF9CA5E
+:10D060007868030EBA90C3DD71E8B1E3A3BBEE2B81
+:10D07000087C21FE701FEA8A3387FCC0B1E4377A4E
+:10D080009BC59007ED1B78FC7ABB1AFB5EB011972D
+:10D09000FE8F683E0D5F583CFAF9E6FF75E1D381DB
+:10D0A000CA4F724F38B5FD2DB61C4F774ADFEC9E44
+:10D0B0006199147D6FCAEB1C87713B4734B483BB05
+:10D0C000EC6CB1DE36E1576F7B4AA678E5550D076B
+:10D0D000488E47CB8B0A7C2F25C67C33C57C2B9A88
+:10D0E000F83ED1F6AC3BEC827EDAF6EF227AAEA8BF
+:10D0F0003F42F1D22F6FF995D66A8A8BC07D226CA0
+:10D100009A7FDBD3FBC690DC16EFB2448F33498C99
+:10D11000136C8E3D4EB0FE8C659CD25083A6BBCE68
+:10D120003FDE29C57F23F677AA85EB83A71AE4E9BA
+:10D13000E118E30F73AAD677A160BFA4F767DCFC00
+:10D14000BD19D91347FAE51277CE3B0949986A14FD
+:10D15000AF55BD4CC477FD872F0DF15DEDBE8AE163
+:10D160007C57227C4D7E1E550F30D44BD5B4BC2C41
+:10D17000F42B44CB1B2DC9C6C226FC2F714F4FF593
+:10D18000D279476420E2F370C67115FBFD4B949F82
+:10D19000EA2F0A5B950AF3FB4B48F22D837ED9DF19
+:10D1A0003E1894E7EED97F971EF163D9E257AAB0F3
+:10D1B000771E46BB84BDE0A4F80679AF93DEF9087C
+:10D1C0003EEEA4F51ED8F1F913A45FFFC2CEF8B964
+:10D1D0000F582F20AF0A75DEC7F11D9F3FFE57D4B1
+:10D1E0009FB1318C5FF838D447BBA13E9EEC9C8E3A
+:10D1F0006713C6A05FA4F085BB66A23C2B8CE7F446
+:10D2000058F84C6AB81AFA3B96CCF3C7B60DA27719
+:10D21000254A9F7553DCE8811DCF55E0BED4FE4CF6
+:10D220003CC37DA9FD05A1E7FF52BC5355AB7ACDA8
+:10D23000F1E3C54CF19AEFF39462DE12AFC4C82F4C
+:10D24000417C84FEAAA604BA0704FAAFA59F8FD436
+:10D25000CE3B7C44C7A1FEFCFE53A43FCA83E87AC0
+:10D2600046F9BDCE21E25E39B47375D70F6A9D05CC
+:10D270003C5FD39FCB9316AAFFB053F88F4579CF6D
+:10D280007E79FD8784FCEEEE87B7AF10EFD044D3F4
+:10D29000EF46D16FE996BF5F1CEB9D9518F3A7EFA2
+:10D2A0003F9458C8867ACA7627BD7F85EF28E07DEF
+:10D2B000859D1A3FD72AF344E89D9BDD421E97C502
+:10D2C00045E8DD9DFE621E581FF3CCD1FA34BD9FA8
+:10D2D000F69C93615C59F90B6E3FE2BB7CE7E7C7B4
+:10D2E0007E9E857189F114175FFEC2FF223A28B72E
+:10D2F00047E6223F746EB7B38DC8E7DB5F1D8CFC39
+:10D30000DAA64606F7F98AF3BAF206BBF5FEBF586D
+:10D31000C7A9AADACBF0BEBB71AFB6A41739F357D1
+:10D3200027D7A35F71FA5F7212BF5BDF733A55357F
+:10D330003B13DF5930EA973862CBC577515E7C13D7
+:10D3400039EEEA713FF55D9CCF47AC2505FD3E15F2
+:10D35000A077A33C2FD9923E10FD04FB9DC63B0451
+:10D36000DE04DC8FF6AB5EB2A73135EF3327AA7C43
+:10D3700099CA30F4DF8CCC54601D1D1BCE14F467A9
+:10D380001847EA9C1D4BEE9D76C6D33A4A1CF69888
+:10D39000F79DCF09BA7A0F8DFE643E1EF28731EEFB
+:10D3A0007E354C72F88E382FD52B01BB08BF976E97
+:10D3B000999369797F45A9A17AC0A704CF62B64E37
+:10D3C000CB32C96F63BCE2A559994A267E57FE4FFE
+:10D3D00017BDCADD7866A124D20B150163B6AE9FD6
+:10D3E000E57E88A2E639107E1ACBD3151949A586A9
+:10D3F000F83D8E3550EA02758BBF5356C9504E9E8C
+:10D4000010E7F6E8EFC2B41B5E7792DC0F0D626C9A
+:10D41000783ABE07E14DD04DF053F1101EE6635748
+:10D420002A1997173374B493A550807D09F4545D7D
+:10D43000353D13E911FEFC180749A607CCCFA3BF61
+:10D44000FC05EA4140A7FC3DBFEFB270358018C330
+:10D4500081C9AF3A99F177E856BFC3CCF6C6A5713A
+:10D460009278E7681FC93117EBFEEB843C8A55942C
+:10D47000B7D509FFC8C1734497CE22A817C6BB58B9
+:10D48000241E52D728E59499FF3D599037D1A93EE3
+:10D49000D15A1ECD1720D7A2C66D20F841BF9F4498
+:10D4A000F5FB4954BF9F7C55BF069C828E8D3E7C08
+:10D4B000A76265559E801B1FCF21E006F01989EFFA
+:10D4C000E8315B9C4F9C87135CE3C46CEC581FF005
+:10D4D0005A1E974E78B92F616F27C641B3A45A865A
+:10D4E00076EF0A89EFD3F097E732B563BA83F8F0A5
+:10D4F0001E314EB980F30AC33FD5A3BE93F4AF1ECD
+:10D50000F59DBDD58F8B5DDFDDDB7CE263CF27B181
+:10D5100097FE6BE263F6FF75E552C50B6FBF86E7BA
+:10D52000B65DF24907D05BF5CCF238D433138FFDEA
+:10D53000A395BE703DD331D08AEF38A46FA0B7B8A1
+:10D5400061D6EFD174D21B7DE58B7540DED50FE03F
+:10D550007093187F6A1D3FF7BE6509F7D38179E89C
+:10D56000C7FA378BFA37390AC9DF70C4C6DFBFBACA
+:10D57000A596EB91B7FC58A6F3E91EEF51E13F8069
+:10D58000DF6E5D2A8523E9B1DED76275783F6E9E36
+:10D59000183FFABDAA00F3E6AE9663BD57C5E9D2BF
+:10D5A000B85717FD4EC5029627DE21B37E3FEBD458
+:10D5B000BBE467CDA8EE7D2CB416E81EF54FA07B2A
+:10D5C0003C97C7EB621417E2D1785C48CB203A4F06
+:10D5D00033E4DFD991DE04DCAF997F30FFAEF3EFA7
+:10D5E0008BAFF4A69AEF1D2AE7E22CEFF554ABBE01
+:10D5F00034946FEA39D05FC154D6CE0D615E533991
+:10D60000E8ADC4FC18BE49722A4D09A35C54F43C31
+:10D6100056887AAF78EFC3A8AF255DD5A567BE0E53
+:10D62000FF6F8E4B26BE5CBCD64BF7B63F8BCFDB75
+:10D6300089F4247B727C01574F7A08EDE0EBAEC68B
+:10D6400075A7F75C4FB5E6F391BE7D158080FC6F42
+:10D650003E07CE4FB67BDFF6E2FC7EA332F4BBF48E
+:10D66000848FEF4418CACF8607507C889C306304AF
+:10D670008EBF46BC6FBABA6A24A52BAA984879BC5B
+:10D68000DC8A2AAF487344EA17E974AA776F551AFF
+:10D69000E55755F92835E0EBF0D5D0FB938E617C4A
+:10D6A0007C872EF0976413F00B90FEE548ABA473D3
+:10D6B00045A75E19C177DFD840D87770597A0DC178
+:10D6C00057D319F935A13EE5ED988754AD9D41F842
+:10D6D00052F44A5608E56FC5078E225C9DDE4B2D3D
+:10D6E000EF5ADAD3C646BD7F1A056F83DEB671B82E
+:10D6F000DF2F717A8B86FBFD6A8B17E322EEBFB2B8
+:10D70000EB5D29823B98431CEEBFE6E7B43DE1DECA
+:10D71000327BBE09EEEEECE904F7FB049CEF1670D9
+:10D72000AD1678A816F0AC46B8537EA4C8FB443AB0
+:10D730009DD27BC4FBB72B111F90CA087780877DD1
+:10D740005488C9301EBA79F1CFEE1274ABDBC81F12
+:10D750002ABBF2FC08777B1287BBC3057820BA0688
+:10D76000B87BB13C44F0545D1CCE509FE341E415BE
+:10D77000847B267EE7F800B8F78D1F87F27082055C
+:10D78000CE5AD2E40B83FB237C7F4B127C1E0DBF51
+:10D79000248DBFAF6BF0776FFA71B588B7AE16EF17
+:10D7A00027221C51AF7908E0C3340E4FFE7DA4C878
+:10D7B000FB284D16F67F35E001CB1F16FA10C21973
+:10D7C000D31FC573FB3CC956B94F4538F5E1EFF29D
+:10D7D000B0A4101B98CD78682FFEA5859817F3C6C6
+:10D7E000F9AFD74A3FB2AE44BD03E97D18E96DDD1C
+:10D7F000ABAA0DCF3FE4A55759EE67CBB3FD895EC9
+:10D80000827F4042BDE63EC1876B915E687EDC1E32
+:10D810005E29E8E06EF1FEEE3D827EEE17FCFCA094
+:10D8200041373E7E3F64CD741EC798946113EF204C
+:10D830004698394E30D1D7C0349817D9365E4AE968
+:10D840009D4BF68E9DF8367E14F3237D25BE7367BF
+:10D8500098BF439BD70FF5A144E3DDD989DEC439D6
+:10D8600074313DA288F720656E4FB6C47CDFB5DA0F
+:10D87000B7DF817E99DEE613EFF3A7AF84F1E26BA9
+:10D88000DD6447F50DE4CD590879572DD8550CCBFB
+:10D89000B97C70C1BC0B4DF411DF8B5F47755D59CE
+:10D8A00080F44AF638A43FA91DEA44F802ACBDE86A
+:10D8B000BF7A48CDEB87FBC14389B1FD70B3E2B9B4
+:10D8C000BFC49375A9C59FB04EF5533B7DA255DEED
+:10D8D000AC13FB439FA956FE30F683CB447F9FC514
+:10D8E000077E140F7496726E2AC9CFA46B63EF0F74
+:10D8F000D5AA16C2F739AA4773BE0EE56B5C6FEE68
+:10D900002177189D839C0D8CD888FE2F83BE96337B
+:10D910002EE7428CEB93C6BA7E86F43E02F7019D59
+:10D92000E81EF701CCCBC334A29B945B6CE47F5818
+:10D9300025F8EC5EC15F6B045F3D807C3502DF81C2
+:10D94000F651FA13C14FEB90FF20DD129FCEF57810
+:10D95000F1BE9761C72C778CA5F71CAB5D36DA0F4B
+:10D960009477ED6117DA05FBC6EBE8F791DD597A9C
+:10D97000C08DE5590E3FC0434ACCD2915E3E732F15
+:10D98000B8E8ABE25B01FDF4AEB0A2727FA49E9456
+:10D99000C7DE1F45A753F49E80AA5FCBD03FFD7022
+:10D9A00052A513E1FC703C8FD3AACDCF26B8033E1D
+:10D9B000B6C59BE2A552675FD5F51E1F76FF702F97
+:10D9C000EF12EC12F2820D0CB16126F9502BDE7BC6
+:10D9D00064DE101B699213CB87E732F4EBF5940FEA
+:10D9E000BDC8CBCD5C5EAE9062CB4B437F37E46568
+:10D9F000B45C31D295174DB7DCA7545D3E46F26654
+:10DA0000646CFFC1EFE3EDFC1D6AE6F3E5A7F72CBC
+:10DA10000778FDDE0C2FD4830C7FC5F762AC275A44
+:10DA20003E9EB8CAD85703F43ED002CDFBF0F8AF03
+:10DA3000DC57ADFB41E1B9D5A40F149CCBA1B4A830
+:10DA4000763AF111C3D318939D7C7CFD0F3D88DF9E
+:10DA5000E3B5E27C7CBD1AC6B8A47D1BEF7A600EEC
+:10DA6000C075C1E3329D8FE33D0DD914DFC2B2BC56
+:10DA7000A4A71BEF231E0FDFEE31C73114FCD4E93E
+:10DA800047FDBF377A2C581FDB7F538DFF44BB8384
+:10DA9000F946A25D01FA5D6704F5BF9F38E9DD181C
+:10DAA000231FDA18EF33C78F18E95BF1D3CE21DCDF
+:10DAB000DF8AF73317D29DAB0F9DD7F4CE177CDCEE
+:10DAC00063E833C773D247459C35C07D96C57FCA8E
+:10DAD000CF498F097F1873F4521E27CABDBD947BAE
+:10DAE000783C13D36397FFD37EA4513DECB421B8A7
+:10DAF000FEF2DAD3ABDEA52FD6F3806211C7BD608C
+:10DB0000637C78790CBE5920EE072F10E75D067D07
+:10DB1000157FDFD0B3395D46D3ADF4D42544A71FBC
+:10DB20001F54C95F5B01F4877A98F4D4787A8F69BF
+:10DB3000D913973D780BC0F993433295979D731095
+:10DB40005DB6FF878FE2FC3B7FABD2EF267C727025
+:10DB50001AC5EBB78BF79EBBF8CEC5EDDA1B5C5C44
+:10DB6000AE149CBB97E8BB8BAEC2F335E4DB82738B
+:10DB70000F905E5680EFBD4EC0758F78799222E887
+:10DB80007702B61F92BB1CEA15B6723E61134315AD
+:10DB9000E48FDE10EFBB37063FDFE0F25AE2450BC1
+:10DBA0005BD750FF0CF4C324535CC802F1FB07851C
+:10DBB00078B884E57A88A521DF08F9D64DFFD677B5
+:10DBC000B0DB9DD6751AE9C2AE754EB0D861DDEBFB
+:10DBD000FC2EE773A16F14B6E6F07975ADE7E7E3C5
+:10DBE00063ADA77B1D13A97D7B62ECF1EF17E31FEB
+:10DBF000AB2AC29B5BAC44BCB75B10BE5DC3F7D520
+:10DC00000AD627F6914CEB2AAC2DB5C42B15D4E6D9
+:10DC1000D3FB7A85EBF3B5DB4CFB53175E42FE97E3
+:10DC2000270DEBC6CBFD6B2E23BCA8AEBC3B917E73
+:10DC30008F3D557CC77B5EEC97E3E984161A534908
+:10DC4000F2EA764FACFB4DF747E3A956E009EC80CA
+:10DC50002C139E0CFC44B73FB6B9FC8EF7F01CE2C7
+:10DC600011FE9A50EFF22B0A7FE9B1E1F7A4A0D799
+:10DC700063A00F042E087EDFB2C4CBF50A3F816F8C
+:10DC8000033EC677D0E7C208B727913793B13F4E1E
+:10DC90000FE7835BF7F8821E26C55ECF6B5DEB59FD
+:10DCA000CA42A0C79CD4B83ED1FB7AEE6221C70518
+:10DCB000ACA78B4FF32D7CFADA9A5B389F0AFC9F56
+:10DCC000DC7F0FD1F5B170BC0FE3547A5BCF6B48AA
+:10DCD00007E362D0C1B0101B95FD7F8F0E4E68FE2A
+:10DCE000118FE03E02FB15EED3C54FDE3FC63CBFB1
+:10DCF000B7E227FD9EF6A59A0B3BA70E4DF61DF445
+:10DD0000D27E27FBAA6149435D813F63FB12CFA30B
+:10DD10009FA19F6E45E2CFC6C4D28B5756052EC732
+:10DD2000F38BEAAAA2CBD18FAA0A3D97A19E9BCEE4
+:10DD30007F1723D67B7DCCCDF1BBB2AA92CE3F9884
+:10DD400023C4F494EE7700D8894CF2472B2EAB7E97
+:10DD5000A6A9011DFDDF9A78A7405502ABD3B3D029
+:10DD60005F94941132C1EF1F2E7EEEB2266DBF8EEE
+:10DD7000E71A76E81FFD608E81CA598BFFEC456576
+:10DD8000415FC093F11C731C6BF04B12F913CF462B
+:10DD9000F913CF5AE69104F3FE0A3B5B7178E81C55
+:10DDA0005261C28F2CE0015F681FBB5BE7EB5C1E1A
+:10DDB000EF217D60D54536B2EBD609FFF4CFD02FE9
+:10DDC0004D7051E8BC01C3E0B0BE96C0D7E1C4734A
+:10DDD0000C19EDAD08E5DDF862974C4F1F4A984FDE
+:10DDE000645E09F37D596415DA0F1D935AEF203FE5
+:10DDF000A03390E606BC7ED6AFE5B084E712798109
+:10DE00008B11CEB57228C30BF57F21776660BDC13B
+:10DE100050F44E1F9E5E84F71202A6F3CE21B48EFC
+:10DE2000EEBCDC337FD15225EAFCEF6F179BCB5F52
+:10DE300071FA2FC679543BF9FB60491F4874BE57ED
+:10DE4000DD75EE9447FBF26437C723D105D2D54187
+:10DE5000AE379D55BC097DC89F3D32F345CB3C7C18
+:10DE600096BC22ECD13AA0533CA732E86398E2B7C3
+:10DE7000211D0DAF81EF663CC6D077FBB8E879F085
+:10DE800098FAB9313F1897E8553E97CBF7E3287ACF
+:10DE9000D82DF1F9878AEDDC6E642119F13AC7209B
+:10DEA0003C6505CF2732E38FECB5778D7327B682BB
+:10DEB000E7759E0BDEC6CFB9A3E733A7F9EE163C94
+:10DEC000EF99D3DC6F3E9E7BCE29BAF8434C77ABFB
+:10DED0009DFBE3515EFC50227DF6A6B75E54E32124
+:10DEE000DDF1E6467A9F60AE9BEFBF7359A78AF8D3
+:10DEF0000F305DE3E756615ADF6DCC27F20D2AFA49
+:10DF00001D6E89846FB81A72B7BE18BE1AD5BDB916
+:10DF1000073B5F42B4051AF45C3A1B32DA35F95E0E
+:10DF2000E679DEAE0B0E4EF1FB478A83D6D5BD6E89
+:10DF300007C1C15827D4247C74C149BCCF66C0A591
+:10DF40006BDDF1375F85FEF8DEE4DC1CC7E80F7996
+:10DF50009C3C9F57349C3EC12290930BDDFE1FB921
+:10DF6000A1FC7AB7FF2E4CCB1C9D839521C437555D
+:10DF700098AF900317A5001C3E1A14B83819E1D1C8
+:10DF8000D2F782F4FEC34E2E0F0EA71B7A6DAB1B89
+:10DF9000E99BBDC8F55AE3F73256ED387EFF8D0098
+:10DFA0009F8F5EE5EFCD95CBDE6BEE22FFB2CC62AC
+:10DFB000D921467A58F80D1E76DBC47BD17C9DF3BF
+:10DFC000140EEF798DF174CF6EDE52D9F2BEFDBC26
+:10DFD000A53C7E95292D63AEB7D8092B045DF7ECDF
+:10DFE00007FD1AD1FDCC5F3A99DE2DD9A9E993C876
+:10DFF000CFF138A7B3F953FD32C6FD4F582D911F0D
+:10E0000069FC516F532BE4E787137DC8AEF3EF5CD7
+:10E010009C89EF9754B4703F67AABC28E33F207DEA
+:10E02000683FDFEF31BF08E1E4F27B5DA6F39A368B
+:10E03000B53243477ABED5E54779907FBDFF5DC4D1
+:10E04000A7E1E730F6DDE7400FC038CEFC5BBC3916
+:10E05000481FF90D4E3FA50EA6C4815CCB5798030F
+:10E06000D3548D294E4CE39803D3ECE5427FAA9D0F
+:10E0700045FA8327274FC3F7C4F39B9FFC14DB1794
+:10E080002A917D92899EF29B5FFD82EEC3F9F3286F
+:10E090004EF75B5B348BDD39BAC19AFF7693359FBF
+:10E0A00011B1E6330F5AF303706D267D73FF1E1E08
+:10E0B0009F527A9ADFEF7D1E60A0223CB6D9493E7E
+:10E0C0004E296DCEC67887D34FBB6D58BEFBEFDCB3
+:10E0D000EEEEDCEAA47725F7BD17C7E292F01D6AE1
+:10E0E000E7462C3F1DD7908DFE45A84F714BB0BB26
+:10E0F0008E40BB71E7A506BD8629BE69E73FF8FDE6
+:10E1000094CEADF630C6519CDEF5E4D3489FA7B758
+:10E110000E207DEC792964C37E43F770FC4F88F3B1
+:10E1200058E454E916AB3D7E42E8011D27B579E875
+:10E1300017BAB8D6BAEE4BC2D67CA7A87F1B337DE0
+:10E140004FC7F810EFAA34DC6737C57EBFFD73C137
+:10E15000174F3DA519742B8BF71E9937A5FBBEE20F
+:10E16000EEEE73DB2503808E4A111643BABF974645
+:10E170008DDB850FD17F92382FEBFCAD4CF03955FC
+:10E18000556489EFE8D2FBAA7C69534DFB5141ED00
+:10E19000BE947CD257F7A5DC66DA67CAB61E48B9CA
+:10E1A00019FA6BDBA2D0EFEB95CD79E2810949F842
+:10E1B0005D6EC0F96239FAE7DA1A5EF2603DD08B23
+:10E1C000C79AE3BD0A6BC7A54D35F1E9D7A54B83C7
+:10E1D0009FCA740E9FE7725A72F11E46692DFF1D89
+:10E1E000BED2861BAEBB1AE1BE9EDF4FCF56589EF5
+:10E1F0000CFC53B6FD86EF8F86EFC1C7C6F9703EA3
+:10E20000D9F8242DDEBBAD3F43F776EEB571FF4460
+:10E21000345C467B387EEFFD81AB08E512F4F7A253
+:10E220006D2CB53F68037DE4C4E4D06B374395D3D0
+:10E23000ACE10F57535C96959E803E25D4B73A3794
+:10E240004BBE8DF47579F6B5A85AFB97513C3A94BC
+:10E25000C7B4378AC3D67EA2F17CA547327EF76861
+:10E26000A4995EA2EBF59D11A2DFB72A5B0A72CDDD
+:10E27000A4EF971DADA178D8E871C819688A3BC191
+:10E28000FDD14B7CEC147A02931CD9225E7C28CF02
+:10E29000D3BBA748974010A597B2A95E84EBB56C95
+:10E2A0003AA6CF4B91076499CB03F2336D8B277954
+:10E2B000D0A6B73EF173A4A3FAD1741ED65FDCEFEB
+:10E2C0006EF346E8BD58E37771DA749E2F69765293
+:10E2D0003CD5E98F349297CB308E13EB3FEDB4D918
+:10E2E000405F3BBDBDEF648C0B6E6BE0EF8A9F6AB5
+:10E2F000E83B59FB8AFD379AEF8D7DF108FE13DF6D
+:10E300004FF5F88B3DB8DFACE071D3A97D2B332AF4
+:10E3100063E0C96897A45566A0BDD279ABCBB7912D
+:10E32000EB53E90AF9DDD3C8AF922FFC49F7E9793D
+:10E330007778A0BE1BEAFAE1FF3E07E58DE877FC9F
+:10E3400040F6DDA10FED3E1F5F9015A0FBE3F40347
+:10E350003630FE7C854514A0B7F9B8AF8CA13CC916
+:10E36000CFF9EB258A235CB0C6BA1E7CE7DABC1F66
+:10E3700016E12F290EC5B8B0064A8BD65BCB8B7140
+:10E38000FFF050BC17C5CB94D459CB198B901FAD5F
+:10E39000ACFE4B7B2CB87DCA8CF5F96B3C16B9A34F
+:10E3A00092DCF950CEA3F595A23700D29BC4FE1C97
+:10E3B000BC33276D01A41D4B27A42DC8C47BEE7C64
+:10E3C0001F23D38EF898BF8F573A954506F1777182
+:10E3D00018EE8FA5CD526434E61D2CE419CBBFE3B3
+:10E3E000FB20B86EF33D3163DDB85EF377F626C7E8
+:10E3F000AB71CF10D76B2E2F137028ABB75BFC3AE5
+:10E4000013EAA590FBDB787FA995DA55347E69B7CE
+:10E41000F42BF65FD8B79913F035A168838C8B790C
+:10E42000A84B8E872F89750FE5B080DF433714F432
+:10E43000437E7D10F5CFFE02C039249F849F804526
+:10E440001C305E5C66579ECAB397F3FC3E4FE08A71
+:10E45000DA8160AFA9013A879A2FE7BD8CF71B4795
+:10E4600026065E42BCCCB7F9072BC4B7FE11E417F1
+:10E470005DCAE1F0F0D8CA4B2A63D9C502BF3F9309
+:10E480001AE85C3EB48BEFA3EEAC4ED5ECF7FE8BF6
+:10E49000904709FB5BE95E4FE70E89EE133F221DB3
+:10E4A000A1FBB68F5CE96568C7A7019E50EE3E22CE
+:10E4B000B115F85E5E56E3AC452F219EB3E27C7841
+:10E4C000DE5FDE38492E77D1FAB9BE155FB901CFCC
+:10E4D0008352E78D1C8B740EEB9E772D7CFFD0E36F
+:10E4E000A5F1FAB938DED39687D2178FC2F1F316A9
+:10E4F000BD847C383A8EEEA1A702ACDC7D285D8D10
+:10E500007A541ACBD887FA60DA0CEF58F4B93FE4A2
+:10E51000E1E324DBE479B350CF1BCBF37D7E2CF910
+:10E52000371211AEA57152ED6C3ACE17BFA35EE85B
+:10E53000403F82CB84EF299519387EEA509E2669A8
+:10E54000118A0F3C64E0BD99C7E92DD119C9E925AD
+:10E550005F4C4A453BEE501B18D420BF0E0D34ECE7
+:10E56000CC888BF4F06123797D61F72DC9E0F75FEA
+:10E5700092061BFA0FAFD7A1FA133251AEBEC1F506
+:10E58000F14F5C7EF2575FA6C58EBF4F48E0780A18
+:10E590009E8B636193FF3838FB33D21383E73C2CA7
+:10E5A0006CDA27F0BD4D731C7759D17EFA1D847249
+:10E5B000D642F701CA1BAC71E797C5C51ED7A0F3B9
+:10E5C000E0391B0BF525321E88F6D721A973D5C279
+:10E5D00024BA174BE73BC1731A0B99C60F9EEB6326
+:10E5E000CD77CD3385FAE9AEC7ACF59A3EA77A2C44
+:10E5F000A7D583E3B4EBADB48F04CF29D4CED86FC5
+:10E600003AC2B6900AFCDCEEE5E51DE23CCFA86F0D
+:10E61000F4D73E5B13F7DEF8BBE86D552078002E8B
+:10E620008F369F217F7459F33E828B410FDDF08935
+:10E630006721137C52AA5B2236E0ED690F6EB87B2E
+:10E6400014D890C9FB051F8736DDED9F08E5F8BBA0
+:10E650000F26BE8ECFEAE27312330FD9642E174213
+:10E6600075774F9D68CA8BFA5DED439BAF980A346E
+:10E6700095358AB7BFE6C1275E594E4E8B1A11DF1A
+:10E68000DF3938CF6DCA3BA2F22EC88F36E5F5A828
+:10E69000F2A4A8F2B4A8FC405EBFCD1D192CFB402B
+:10E6A000DE3FF8D415F8FB9E6DFD2273F1058F3522
+:10E6B000F2B62BF0F77CCBB3F8EFD356344B3EC910
+:10E6C000243F2BBACEF35BB5F9A3100E2D2FA31C5C
+:10E6D000286B9274D4EB5D0DDB2394C7765E53BB3D
+:10E6E000066E3F96351CA176BDF63FD2467C7CEF88
+:10E6F000C8F7A9DEF9CE9FD80CEBEF5BF5761E7557
+:10E70000440A2C4E48EE7E7FBD6DFBDBDDBF2F0A39
+:10E71000DFDBFBF90F901C8DBA071EC4F9B8BAF9FC
+:10E72000C480E3BD23CFD27BB47F1CDDFC16AA03DB
+:10E73000F14BCE2C53A0DD9FCB8F8F437D0BDFB4ED
+:10E74000C57DE36752F812DC8F1E65814B70DC5B80
+:10E75000CB87EFC39F4C38ACB63E86EF956F78F011
+:10E76000E52B1498DF6177EB20FC09B74D096FF0BA
+:10E770007C722B7F5145FF1DE1E7F0A0D64136C8E2
+:10E780003F99C0A6537E78EB63987F3DE104AF3F8D
+:10E79000BA7590ACA30972F28AA990DFACC7E6F70C
+:10E7A000DA04AE371BF39B36DCFF53840B2BE3FB01
+:10E7B0000D5E3376803C9D5B726ADB6680C7DC1F32
+:10E7C000C5939CDBDC76DD55790487501EC611A607
+:10E7D0000A78D37E48725D217DA21FEE817DBAF159
+:10E7E000E91EDCE2A5FDE2D2CAEDA837A4CE1D45A4
+:10E7F000FB45A1C72FE9C9DD69381952A82FE93AAD
+:10E8000097EBB28DE22352EF72931EF5A0F83D0311
+:10E81000E03BA20F97C0CB36B19E6D09DCBFF680FE
+:10E82000671AF5F39EE47FC42163CA424EF2A7C57E
+:10E8300091BE72F306902B20D7D78979AF5B7B0905
+:10E84000F9296E463FF128FCEEEFD76754B7FEBFBB
+:10E850002E03F2AE6EBB6EDD2C7F3FF3B9F6BA0D20
+:10E86000BCDC905BEBD2797B63BF4AADE6E3A43EB0
+:10E8700078C9465C47BCC2287E7BE1EC111B97D16E
+:10E88000FE7F2DAD9FF9FDFDD00E3F5A3CC4867A28
+:10E89000A9819FC2E1FE5712603D3789DFEF35F055
+:10E8A000648C4FB7E2517F90417F403B353140EB64
+:10E8B000077D620C0F6EE0FA04D21633C19729ADC2
+:10E8C000E3F0FBFF2038B5FD2BE0F44F9F7747C9FD
+:10E8D0002190370CFB2F5F7ADC72FFED3F01D123D3
+:10E8E0002A700080000000001F8B0800000000005C
+:10E8F00000FFC57D0B7854D5B5F03E73CEBC929920
+:10E9000064264C9249C8E38440081071124344F0D5
+:10E9100031848851693B50D4D87A71203C022699C1
+:10E92000A8D5624BFF0C12790918342250C181021C
+:10E93000C55BF506458C1A70448A7AAFF68EADB782
+:10E94000576C7FFF08888F4A32A2F5D297FDD75ABD
+:10E950007BEF64CE24A9B4B6BDF93EDCEEB3CFD9CB
+:10E960007BEDB5D76BAFB5F61EA6F54C0A5CC0D8EB
+:10E9700066256ACEAE642C7C48F1ED61F007CF6766
+:10E980003B19FBF7B4A0D595C9D89FF1EF0AC6E6AD
+:10E990007EBF29275806ED8D2318CB612CF5BBCF00
+:10E9A000D4DE00D5B94B3F7A7C0F7C3FF77BA98C36
+:10E9B000E903EF438F8CC1F7EFBC6D5BCF2E84D2A0
+:10E9C000D2193579A0BC86F956C07BEF98584327F9
+:10E9D000F4F70EBE7A096355DFBBE5353691B1DB3E
+:10E9E0005D2A6393185BABF873988A250BDBE0BB59
+:10E9F000F02C4B644F11637D1153D80CFD75B82377
+:10EA00005B17C1B81DD795F9C2D05F1F637E86EF33
+:10EA10002D4BA5F73ADC3D4CC3F64B741740C20EA4
+:10EA20007EA1FA19D4E3375A22BB14785ECEC2769F
+:10EA30006C5F323E1286FAF3300E7D7F634A640FBC
+:10EA4000B6CF828FA0DE71A3371286FEEC2C624710
+:10EA5000783A76FA73321C8CE5AAAC05E1EF28828D
+:10EA60003A94592BD9CD0107E2CF3F719673000F2D
+:10EA70005F7799683EA9953D4FFF37F4C7D6DB7D98
+:10EA800063A0B0E1AB586FCF2678993B5885F86604
+:10EA90001AFC03B8EA1FC889ACC3E7CC5785EBB1B1
+:10EAA000DAE99F47F0FF205547F81FB6B335B60A9D
+:10EAB0002815D666CB00FC0B7858FB43000C633757
+:10EAC000E3008097FFD770D6A9C3F32B5D0AAD078B
+:10EAD000FCF96D558CCD67BC7DFEF2D477958958D5
+:10EAE000AA516B1A3C5B73A5BFC746EFB13F8FE2DB
+:10EAF000A50DFA0B32F1B725EE44BA09E27769D8D1
+:10EB0000FFEF9DBA03EBF0FD445C76F8BE74E0FBCA
+:10EB10003A17A3F9CF5539FCAC355547FC4AFCC828
+:10EB2000B24EC2D7FE903F713C394E72BFF7BAFC6D
+:10EB30003722BE00EFD1740FE245A5754D86D7632D
+:10EB4000896FB043FBDC56D57D37E033B8CC49F351
+:10EB500095F0DE9C1DBF8C150FEEFF746A739586D1
+:10EB6000F35FC6E99D2DB702E212F16219A8035DB9
+:10EB70002C64F163266588E75AF445847F5147C2C7
+:10EB8000F7F4DF2FAC89EF497E61BA9204BFA02B66
+:10EB90005DD170DD820A5F378B253E375036186EA7
+:10EBA00089CFD582EE245D24E37B35E27BD2607C85
+:10EBB0007B2C3DF9D86F709995F094DC3F6311FA86
+:10EBC000EE213BF00FD0DD1645217ADD72576A64E5
+:10EBD00025F2A73DBE17F1193A7C15AD77EF9214D7
+:10EBE0009DC12BDB2C30419433879D9C8F4B7A4AFF
+:10EBF000909F7A61CE7E589FDED7D59D614502C138
+:10EC000058F3EBEA2EA4FFDE67AFE6FDAC48D5195A
+:10EC1000D4438861183714FE432B03BC9E34C52CA3
+:10EC2000345E17E057C209FF7AE15F43C580BCE854
+:10EC3000C3061CBF8BCB0798E1121AE7DB296C1DBA
+:10EC40008CDB6C52FC26686F5E3A3EB292C3614325
+:10EC50003E6A1420359B589B5231C0F7CDA6132530
+:10EC6000B795F1360DDEBB85F17581F78E2A005F11
+:10EC7000A36D7D4C45BA45FA87F6A5D85E3480FF72
+:10EC8000E6F5BFF913C2DF7CC048178D8F19E7B1D5
+:10EC900034919E8A06E824B592E389D5B0C81880DD
+:10ECA000D729EAA9B5B1888A785A56CD4E02E966C5
+:10ECB0001EE99981F4E3ACEC64F3A10C7DC0FC1176
+:10ECC000807B4AF7CE9746C2FBEEDA583E4E37B409
+:10ECD000ECB68B4E5D34B0BE12CE4BBA37A9CC41E8
+:10ECE000E3D177008A7FBF83DE1B37FB82C4F26EDD
+:10ECF000FA2ED3A412BDF6E023E41BCD9FA3C038A7
+:10ED00009B978C32E17AA6827C43B9BCB07DECAE95
+:10ED10001584677F09CAB707D380CE099FBE2A949E
+:10ED20002FA5EEEA5FBBA0BFA7DCD5FF8D258E1314
+:10ED300070E2F44790BE48A6E764BD23DFCB2E6E99
+:10ED4000296F710CFF1EF017E12DBE359DCB0F4DC5
+:10ED5000A1FAA2FF30EF5C47F0694437B76D2F226C
+:10ED600079DCC0DA89DE1A59C482F4BBC8C6C2692C
+:10ED700040178BE0B57428176FB1323D61FD9644A2
+:10ED80008CF546210F6E6131FAFE967D49ED352CEA
+:10ED9000EA84F6261B8BA662D9696C6F667141EF17
+:10EDA0007FB6263E671D7CBE378B7577D744D4204F
+:10EDB000CC7BAB1D745706BED04EEB3365F94E5A73
+:10EDC000CFF40A7FD13DA84F5E35FB7601DDBE272B
+:10EDD000D64BE2E75E57F5BB88F714D544F38FDFD7
+:10EDE0006325FC9C02BD8DEB7F9F9BDD3C1BCADE37
+:10EDF00056DD3B7A34A2C95530DB3918CFEB9EB3D0
+:10EE00003720DDB8DD26C2B77C7ECC65A67AD5DD9D
+:10EE100002FF2B5223BB8A08DD13919EAA46497D2F
+:10EE2000CA26CE82FABB6656D709F5E6EB1D41EC41
+:10EE3000AF07ED07A817B8B9DE28705B687EB22E61
+:10EE4000E72BE906C6A1FE522EE2A584638C5BC8BF
+:10EE500041B6897F27F4EFE625293B49FFF6D3AF7A
+:10EE60008911FD96052C88D7E7845C794ECA9536C2
+:10EE70002B972B9A6BEE32A83FF741996F1DE095C7
+:10EE80009582DE83EF1B3F4AD1919E5EF9E85FEFEA
+:10EE9000FD19B49FFDC0A25BA17D01D218ACDB734C
+:10EEA0000A9747607F30D48F8DC0F6386EE3C1B1CA
+:10EEB000647F1CB408FB46C8CFC6B4E0D685D04FEB
+:10EEC000E393993EA064F6BC39F2E85E6C3F64F7C8
+:10EED000ED817E1B53385E1B9F1B49DF3F610F4E48
+:10EEE00077C33C73AD919F3C8172E3052BD97B675F
+:10EEF000597411C27FB6D3AEE07B27705EE95042F1
+:10EF00009B82F3EA76923D047C9AB310BE3BB936FD
+:10EF10009BCF4BE0E9E48609C4179BCD7CBCF0B3E2
+:10EF20000ABD7FC21C989103F5134F97FB564053BF
+:10EF30005FC012B5003D87EEE3765EBD49DF8178A4
+:10EF4000628753095EB91EA18D8B67627B68E9F207
+:10EF5000AFA37C1C8ECF51DEB304B9D9CBE205C878
+:10EF60004FDB1A467546519F748FF3915A655E5870
+:10EF70007CA01B177FF79499E3357EC84CF47CBEC8
+:10EF8000FDE37CB52AAE7F709C10C86526F98FE43E
+:10EF900072425D1DAACEC8FE0C3D972DEC3A63FB74
+:10EFA000EBCEE01D6EA0BFE6FBFFE79D6584DF387A
+:10EFB000C945D69E497C79CAEC9F8B74EBAE895AC1
+:10EFC000E627E8F30D82AFEAADC2FE63514B221F84
+:10EFD000CAF6AA6A23DDCB72BDA07F678CCBF7C1CE
+:10EFE000ED26C11FDFB4A21E9BC2416685A8471C47
+:10EFF000D8BF4EFD4FF9206AA9877AE1F2A8659142
+:10F0000028914F00DF511BCCFBD45627E76F4003FC
+:10F01000F6B36832237DB94805FBB5029FEB5D3D31
+:10F02000B02EA79F7673FAFA236005F03D8F89F71B
+:10F03000AC60EF821C7BA64D89E27E60DE16EB2E73
+:10F040007B11F2B55F75E27A6E57488ECD6B9B5699
+:10F05000B215EA4B0F5C40EB9F3699D3E5D2889B03
+:10F06000F4E214211FEBAD110BD9DF3F5118F2016F
+:10F07000F44F7674237C945331180F28D70DF41075
+:10F0800049A8835D34A593CB5506F29C25D84B52F5
+:10F09000DEA31C6749F69F913EC2521F71B9C7F4A7
+:10F0A0006C947B522EDFEB0A74B949AE8DCEC6F557
+:10F0B00085F5E47273BF42786D622DA44FA41EE8FB
+:10F0C0001F57E891D36A98EB2BEB262A5F7717D16D
+:10F0D000784B5927E913A95786A383D7BF840E7E9F
+:10F0E000867400ED8D1FB0E865305EE372166D9A90
+:10F0F000C84BE744D28F5C4FDAB89EC432E53CF48B
+:10F1000065B27E4CD687C97A30DBC2F59D5C6769F3
+:10F11000CF644FE776C094E51195C1FC36A6F93F60
+:10F12000CE9C3460D784DEB2D9F40BB11E60A3E06C
+:10F13000BDC569D36ECA86F690C6FCC857A980972C
+:10F140009DF07CBBB07B6BB339DD7B2D9C7ECD5AB3
+:10F1500080953B705D62B4CF8D673217D2A3C4E750
+:10F1600076277C5781DF71FDD4FFBD8DB5A5247C4A
+:10F170005FFD9C9DE4EAE7CF3A2356B24782856E55
+:10F18000E82FEB5756B2537B9F73923EED15FAD0A2
+:10F1900083F628D1CB2AAE5F715D272135558F6468
+:10F1A00048FBCA352351044AFBACC9CDEDACC1F6CE
+:10F1B00090682F8A5DCFE9CA4AFBCCCFDD3D7762EC
+:10F1C0001DE061689FFF8F58E7D081E9E5DF87E7A1
+:10F1D000A180C3C7B11F2C477AB5AADFB9DE06F4F8
+:10F1E00035435D1EBF0BE6D194EF70A19EAB29FCA9
+:10F1F000F52F6F84FA8707CCCC8AEBBC677A1D1B8E
+:10F2000035BCFC5D12319FE849E0975BF619EB4D88
+:10F210009DC67AA8CB582FC8707A4E4F20D9E1FBF3
+:10F2200033D0B5D5DAF2C14E80D7FABC95F4D1A768
+:10F23000EE607106CA5B53FC18E2D95AF8F144F447
+:10F240006F84BA3F51B0B402EDC4CA38FE91AF3FEB
+:10F25000B7CF2B740D81B701FC319B89F00CD63AE6
+:10F260002F49CE85049F782CFE0F5F84F92F9A9D3D
+:10F27000E2BA9B9EF8674EAA427B926064A12D572A
+:10F280007F88FB2D786F09AEFFE959F01EC0D5B01D
+:10F2900085EBC346164B43BE6D06BBD3064B7C477E
+:10F2A000065F875BDAE25551F8DF8E8CDA7108A7CA
+:10F2B000F6272D80F4B11AFB4DB093AFCDE07AE084
+:10F2C000967D76D729031EDD867AA82BC7752A91ED
+:10F2D000FF84FC61798A96B81F7A57095E8BF86BB8
+:10F2E000B2F558A6C1F857FCE93392F78B97CDA732
+:10F2F0007DC4805D6D25F9B4F8AE203D7F692BDFBC
+:10F30000179EDE6AD711EFA7B7F3FDE3E23C47C4CF
+:10F3100006FF7B859BDBDB8BE13B45198CC764BC1F
+:10F32000BDFFF0555EA4A3F7191F2FDCC9ED8FF7C1
+:10F330005D80AF62FE0EF6F77E17D8EF0AE2F9AAFB
+:10F340000F512E2EDEAEFAD04E60879CE48F59BC52
+:10F35000FDCA710B1DD8DFA723A6A15F68C795E87A
+:10F3600089C2F70211EED7895D01CFB51D17931D34
+:10F370007774BB95C3E9B6EDC5795CF12795F84A7A
+:10F3800033B120DAC71D16FF38E467FDE13D337065
+:10F390005DDE9F956BA2F71F57980BF1E15E968596
+:10F3A000CF172B5A00F9B761CB929989F64E6A862E
+:10F3B0004AEB35AD7079568F83F8E97AD4A34DDBEB
+:10F3C000817F70FCD96FFFF2464F223FDD5EC54C56
+:10F3D00009F6CBC35F237AC2BF28E06BB1C0D75711
+:10F3E000E52B6BAAE48B961294A38BEF6E29710D1B
+:10F3F0006157F4F3C5C39C0FEFCB50B8FF202FC368
+:10F40000B0CF186E5FE62835915EB1F9987F0F9402
+:10F41000D9B02DC6FDF7810C8DDA0F64707B5FFBD0
+:10F42000DD6DFB5E87794DCD086ECF807A21F39735
+:10F43000E3BAEB71573598B18862B2BBD8C3566E48
+:10F44000C76ADC8EDE9CC9F6AE4BD88F77627F9997
+:10F450002417F6623FBDC7FF780CF1DA5CF0F14487
+:10F46000B40F42E73EB3A01FCDD1AD903C77F80278
+:10F470000CE925D43D8B2D281B90C3211FD713C920
+:10F48000F3FA5306DFEF843C71EAE7FD119C7F3B02
+:10F49000DC9C3EB72D4B213FE4364FC48E40FFB578
+:10F4A0007C2AEDA525C2EF67DBFD945F45FA8E2827
+:10F4B000AE3158D7397FF435CC8DA830CE87BB8B91
+:10F4C000C9DFD977609A4F8536C7EE1FAD198578A9
+:10F4D000EA32FBF07D87AF270DE7F7E1EE9369385D
+:10F4E000BF86DD2ACDBB21F249D6C2B201B9F033C5
+:10F4F00025F83ACA01E6521C38BE940F1FEEFE34BE
+:10F500006B8183FB0B487F560E8D97A7DCD37E8ED5
+:10F51000DF5F71395F978F1EB74650EE7D6407FD40
+:10F5200096206F3F72727D772A43EEEF3A0B50DFE1
+:10F53000F4D76F2A35A19CF88E8BCFDF63E92C407E
+:10F540007EFC8D62EC67E91A138B806C5FB206500B
+:10F5500003F2E8A3479F294079FFE19E670AE62767
+:10F56000C097FC9D2C7BE578C26F26FDA81E4B340E
+:10F570000FC79BEFB3727FE5307E54F93EDBC2FDCF
+:10F58000A17D3EAB8E7428BFEB6B48F1A37DDBC73A
+:10F590006C24FFE6770BBFACDF3FDA83FB18F97D05
+:10F5A00052FF151E4E4F4A9742FE83D4B238C9E32C
+:10F5B000BF59DE7B603D13E43DACF3BF215F34D91E
+:10F5C000E2C74632A20F0BE2CDD2ECD0503F65AD80
+:10F5D000E4F415BFC344FB2A4BAED781F2EC8A9208
+:10F5E00094361330A227256D22C601F2734BE9FD34
+:10F5F0007035A7FB7016237F5B0E6B51485EBBB85E
+:10F60000DF3E6F3273AD83EAAC11DC9EF132DF1660
+:10F61000B598D65D41FF90C487D40B483F281F3F63
+:10F62000526C443F4AB74276A76AEA9C8BFD0E476C
+:10F630004F1347C8FD3FA7A7FEFA3F899E268F18A4
+:10F640008E9E823AD193D736343D093FF179BFCFB0
+:10F65000C201DCBF660B7CDD27E44EFC0E9BF49BF5
+:10F660002B38DF99A2BF9936475445FDE1337F9C83
+:10F67000E8FF7D18EC5FDC27E5A0FD0EE5C895F3FB
+:10F68000745A3716EB417F41EAC536D28FF79A623A
+:10F690004568AF648F6FD98F74913DB7AC6225ED2B
+:10F6A000FFF2DCA80F50B7921F745975E0D488049C
+:10F6B0007BE110DFCF34DFE5A7E7D3BBB97D101ABC
+:10F6C0006D217B38D4A584719D9B039608DA416B2C
+:10F6D00015EE5F096FB0EB3CEEA3AFA0B8CF0F748F
+:10F6E0001E178A48FF6FCF8EEF23BD3538C8EF91C4
+:10F6F0001C3F3AF885CAC71FC368FC8E721EAFEA6A
+:10F70000B85AE7FE15B17E1DB3FC396EB407D618A2
+:10F71000F959C685FA9C8018186FFE7A3BAD43AE46
+:10F72000CAF1CCD26D5CFF0C960BE467CE9A2C1616
+:10F7300046C46FFAF91C2405D67345BB8C3739CB08
+:10F7400002456879BFBBE9B7AFA400BD66A19F8E33
+:10F750006FCAC268F7937F98D7C97DFCA00900C91A
+:10F76000C5D6FF5C577369425DBC3FF0FDDC6B6B37
+:10F77000F248EFF6B723D8A08F65DD6FD7311E357D
+:10F78000D0AE81BD6BEB52F8F761C7B5578E063C22
+:10F790002872FCFF5CEB477FA19D19C64B844F4B41
+:10F7A000EADF0CFD3B74F97EBCF64A78E1C10A59E8
+:10F7B000BF66AD1FE0BBCF6CEC8F502ABEC78A1C62
+:10F7C000EFD6AC6DEBD6E70DD8056027EC1A913972
+:10F7D000601FAC7E7B66FB853056AAEB530BEA5D5F
+:10F7E000A9E7431E85EC8F647E3D20E4C3DF2C57E0
+:10F7F000F54176F4811124577B66204BC2FE83E4E9
+:10F8000076687980A13D07F64817C2DB7BFCE3D31D
+:10F810002F427BEFECDF1F1BA9E37BB7CE45BB3745
+:10F82000744E23BA0DED53230AD0AD4DF00BE871A1
+:10F830008A0B487A5AEA1274EA0E338C73741C529B
+:10F84000268589BE5A0AAE83B5CCF7F85F4238E404
+:10F85000BE3279DEBF1EC1F70FA1D2EAAD25D8FFB7
+:10F860006E85A19DB0AEF444D602DA37BD9BB530AB
+:10F87000E1BB255D0F123E97EC330F89C75F8FE028
+:10F8800071DEE6679FF6A3DCF828A2904C68D022D0
+:10F890006BA740BDA1C1849620AB8CCCBB91E21C70
+:10F8A00075163606E67704ED268463DF37C353709A
+:10F8B000DEF04F8147DB028B489F6EABB339284E99
+:10F8C000543AFF56C2832BC58F7858575A9D83E30D
+:10F8D00034CF9AE1A2F808D871D8DE7CD7B7C82F08
+:10F8E00024E15AD765AE453BA70AECB9A700EEFC68
+:10F8F0008C6B6A7DC0C723D5FDE5B73B305E3EB457
+:10F900001CFF6E26A78B362510FE4625F94159A20D
+:10F910005FB3B08BDB8D9F8DB018E22B9F8DE0F62F
+:10F92000ECA5E1D874249FC35A4F2ADAD321E6FF0D
+:10F9300004F7CF2CE0D0F7D03A7179E469D5C93F0C
+:10F9400066F3F4DC7B21B65FAAD1FE85693D0FE04A
+:10F95000B8BD6B3DBE754CF001D6EF2AA37D4FBDFF
+:10F9600027A87832F9BC707D7B9FBDAA1CFD88D288
+:10F97000EE5AFBA89DF4E65AA77E7F2DCAD3DF6915
+:10F980003C1FC0168F4D877E96FE3E83C65D6B8FF3
+:10F99000ACC5F50FEF54A9BDD8117460BF4BBEB90B
+:10F9A0006522D22B73444A508F9A3DED0CE918B66C
+:10F9B0002BE42FB179020CE3C4D3C3F33405F5452E
+:10F9C000923D331DFD55B45FF190BFB65AF0C71894
+:10F9D000A082D3366285B63F8F18B06F5EF9E31C04
+:10F9E0000D1F4ABBC764E3FEF39ABA1486F62D5B7B
+:10F9F000153F66427FBD27C6D00E6EEA54689CA6AE
+:10FA0000D2272DB86FB9A593F37748EC33007F0563
+:10FA100068578CF1A40A7BA08DFB3958ECD848C4F8
+:10FA2000F3637C3D1983F712FCAB8CADE0F240F43C
+:10FA30006711718626E157024D48ED3E8FB45BEFAA
+:10FA400016FDB7F3528CBB5989F955C46BB962F0F6
+:10FA500087CBF22AF17DFA91F80CE4DF38D017FA5F
+:10FA600097B62AB36EFD29CC6FEBA4F13E34C1BC2E
+:10FA7000404E6A053E075204BC57767D3203E98644
+:10FA8000D532E2D7E6AE696A9383C76FD05EC84EBF
+:10FA90006DD989EDD93797927EC6F8C86C78FE3556
+:10FAA0000FE7B31C07F7D779EF0E1761BC33FD489A
+:10FAB000E0D69FE2F817A490BF351BD6C69941E562
+:10FAC0001AF46F7959F98BA87FBD33F50A8447C6BC
+:10FAD000F5302E38AB8CE438D5337C8A7F179437D9
+:10FAE00078DC340EECEF6A115E7C1E710CC419D107
+:10FAF0006F87E3621C0FCBDE9CA8467E7ED0E77B3F
+:10FB0000904EBBAC2EC4D7CCAE97DF427D3BD3C664
+:10FB10003A29EE9A64B7C4D3BE19443AED3B737ADE
+:10FB2000C73D08D775077D94CF92648F5C7139B754
+:10FB3000CB3FDA93AA233FEC12721BEC471E7F796E
+:10FB40009CEF2393EDC8EFF6AF2FB723FBEB7F7746
+:10FB50003B92C317DEC3F328A47C0F897D5F5FC38C
+:10FB6000D934D45F2B3DD2AE4DCAF7D82DF23DBA71
+:10FB700087CEF7D076F2F80F864149EEBA2D22AE45
+:10FB8000E5F7CE43FF87BB84E4C02B7B53C34837E4
+:10FB9000673BED6497696E4B14E16A7BDA1AC13CEE
+:10FBA000883645E0EB90885759441C2CA344478382
+:10FBB000E2A02540723FFCA499C7ABD2228FEE850C
+:10FBC0007AE3E11C11CF62D47FF8D954C277638AFB
+:10FBD0009E8EFD37FEFB088671AA3E180FD7F909E5
+:10FBE0007B70BB87E25ABC7FF68255E7F1B3688928
+:10FBF0001BF0B033C2EDBF93A5A6A805E6BD93895F
+:10FC00003C9FF532AEC5E7D9B761248FCBA03182D6
+:10FC1000FBB2B5DC5F542FE35587B91FAE5EC4A5B8
+:10FC20004ECE5EF408A658B4292DB5B84FFB7CDD46
+:10FC300034F29FDF79FF2C2AEBD718FDFD8BD03FE4
+:10FC40005F3C103F967EF7F9CC67E1F6F380FFD07A
+:10FC500004F68CBE46AB46FD59C45C77A33ED0C3C8
+:10FC6000B07A1743D906251AF10A6019DED3D67A7D
+:10FC70005270BD57B799486F85DB4C7E7C4FD2CB15
+:10FC8000AB1EAE67DFF570BD03A88EE038B26C33F3
+:10FC90008B7883E86F053345B13429BC5CEDD26ABB
+:10FCA00087D2DFB2BF36738B6D1ADACDF926F277C1
+:10FCB0007F6EF1D791BF38A384D6A9CDD9B2A696CD
+:10FCC000B7132F7D6E8F07A8FD328D1B964CCF404A
+:10FCD00079FA8287C71792F1B6B0DD584F8EC32CE0
+:10FCE0008918EBF52C3836A798C70D129FBF20F462
+:10FCF000C4E7EB8A04BE7D1694BB72FE2BF238DE9D
+:10FD00004CF9BC1C955F5D8774300AE3CA45587294
+:10FD1000BF2ACC84E01F75994721FA4882B7CDCD20
+:10FD2000E929BC96FB21FF5AF893E1FED09325F810
+:10FD3000D8EFC5B865BDCB4271E8F3F597A4641A56
+:10FD4000F7B7FDF5BFFFFE96EFE7D7AA22BFC6457E
+:10FD50007269BE8BCFE5A4E2DB1BC5E70EB01F7056
+:10FD60001E6BD50A9423D3BFE9A079341F063982CC
+:10FD700071ACE53D05A8D79BAB7B4A305E938C5FA9
+:10FD8000845693F20CDE9BEF81FD08DA0D6B8CF14B
+:10FD9000B8C1F1557F616626EE7B4EEE7F19F5D72F
+:10FDA0007E3BE92FF8BF17ADC8FFCF16915C8B38AB
+:10FDB0008363312E144A89EEF87111DA31DC8E6AD0
+:10FDC000EAB6EE443B717E5B427C0FFFB3DE18EF78
+:10FDD000636B32C8EFCE3A8CCF1B1E4EFA6E50FCCE
+:10FDE000AF9DD665B325380EF91DF410E51D9C595D
+:10FDF0006262B8BEF5AA6F112AA93376A37D7EC6CA
+:10FE0000C9D76B46A6D43F3EB2BFFAEB83D6D957CB
+:10FE100082EB5C6F62C1C47E9A709D617D1BC53AA6
+:10FE20009F79FAE2125CE78FF75F5C82EBBCD9DC6A
+:10FE3000EE47BE297507AF41FC9CBA3240F615E685
+:10FE4000EF201F9D2F3DDE94448F37FDE3E8B12E58
+:10FE5000311F32593F36F4E3CBA81F3D163D0FE565
+:10FE6000C17C9BF52FEA49FC1BD29F67B392FFE34D
+:10FE7000F01F3FDD48F918DD2AD927B2BFC35AB0B9
+:10FE800018EDA3C36F797D6165F8FED385FDE5B5F7
+:10FE9000B130FA59E4BE40DA97C9F278B998CF0385
+:10FEA00099FEDF8CF81BE23CD27FDC20DEB1453EC0
+:10FEB000E576EF6EC5C7FDC79DE44F6E3E34CF8536
+:10FEC000FEE20F22DC7FDCFC7439F98F97445E8AF6
+:10FED000623E19EB565CB81F59B2FBDD34CC03907F
+:10FEE000FB5ED8E7DE9F49F935C6FDEF07919369C0
+:10FEF00098370070BF8F70A77AE216A4FB66D8FF10
+:10FF000061DE60B3163F86FD367B18D905955DC668
+:10FF1000FDA08CEF6E0B5848EE6EEB562228AFB367
+:10FF20002CC1A23CD46B2CCF753A7580CF2299FEA0
+:10FF300017907E07E2EAFE5D5897FEA79EADE94462
+:10FF4000BF3D66E677A13CDBEA14F24C23F9F6DB11
+:10FF500087DD91750976C36F23DC4E5822F3C134D7
+:10FF600016D560BD16CDF11FC7F546791F4D92F726
+:10FF7000897519AFBF8545492F35B19EFEBCB0C408
+:10FF8000F792E3F9180737F4C35ACA75F493DDE41E
+:10FF9000F0519CABEBCF56637B98EF9B811F96553E
+:10FFA0000CD0AF5C0749BFCDC21F1D6A38B10AE94A
+:10FFB00037D4A5B8707FDDE8E3F4DB08FB2FCC9BDA
+:10FFC0004DE677D669CC131D8EFF7FDDCF779CFF82
+:10FFD0007F3DAC9CFAC7F85BDFEF973F9CEFE5FCF9
+:10FFE000A5FFBE7F9EDD0AE7CBA47925EF5B93FDDD
+:10FFF000EE72DF79BEF2F08B247C7CF10FC6C77005
+:020000022000DC
+:10000000F230256BE8FD42725CE3AF9687FFE0F8C3
+:10001000C623871E4A3381A8585214F672BBCE6F8E
+:100020008817CF501D7E1E3755793E4572DC5D9F87
+:1000300021E2EE9C9F5F7A5AA5F56A12F1E1A64390
+:100040004E1FBEDAE0584CF1D9E4F8E952B67F060B
+:100050002E51721CB511F9B8F8CBE3A91765393DDB
+:10006000249F745684790AC9795A2F393E1D114C40
+:1000700058EFEA32D8080C41D7362DCC32129E4FB9
+:10008000CBE2F6F44B229FC86BE1E705EE73A6FACC
+:10009000711FE335F17CA77C4F607AD62494EF0280
+:1000A0009FCFDEC04C809747CC9D244FC24D0E1F82
+:1000B000CA3FE9C791FDEF10718BF3A5F36F671984
+:1000C000E9BCBFFE4FE2FB8592BEFFDAB8DD16C089
+:1000D0008D811F18D1EF6B18672A1A4CB7C3F533FF
+:1000E0001CFD2ECB0ADC9E4578F14FA4FCE6F39470
+:1000F0002FA995F193E82F6207AC3AFA376DE2FC2D
+:100100000B5B9F23F6EBBEAA599497CDCF8FC87394
+:1001100036C3D98F1BFBF99FDB8FFDF5BF93FDC85D
+:10012000DC81769CE7A9697ECAFB5FED04F8715F0C
+:10013000F8A875C8F32CF2DCC597F95DF6F6C3CDC7
+:10014000E96AEFB070FF63E5E793FF34F9F9FB3438
+:10015000F4A30EDF4F58E47BC6FC229EC67625F83A
+:10016000B743319EAFF79280573E7F44E8C5F46CA9
+:10017000FF515CA78F8FDB6C2C1D4C9E4A2E179B6A
+:10018000030E8A2F3477F2BC97E6E58CE47733FAD6
+:100190004FCBD0AF388BA1BD373523F833FC7EF57C
+:1001A000DB8EB09A8E7EF7D90CEDBBDEE3BCFEA9E8
+:1001B0003BF8736C0F2DEFA17846C7EC8F28EFAAA0
+:1001C000EACF9FAEAAAD2478C98FE0B11ACFAD7C3B
+:1001D00091C5E30FB2FC43BF3CF1935FFFE3069E82
+:1001E0009F1DF2F85DE88F907EF1543D467EA6E6B5
+:1001F00003DC68AB52F97CD8F7F3889E9A0F4C2B3E
+:1002000047FF29EBB497A39D5BF52B07EDF73EBEA7
+:100210002B97F224EA3DC10F513E3A2B2357A35DA1
+:100220005A08E3A0BDFBF1FEABCB116E29FF36A34C
+:10023000FF1CC6DFEC34FAC7998DE7D92FDD9B4F41
+:10024000FBCB6247F053EC6FB39DC311DE23CEA30B
+:1002500008BF7932FF4BBECF564D344EF6B76D1402
+:100260002F977261B399056DC503F2E478962EF26B
+:100270004C445E63F72C9EA722EA0E8F31BFF381B8
+:10028000CC2B8F233CC7B3B4AF961FE618942F40F6
+:10029000FD627E18C505589CFC2DA9E7B81D3DCA16
+:1002A00065217A7202DF519C06E809EDF94BE3B152
+:1002B000E9789E6B7447F452C4F3E17326C2933617
+:1002C000EB358AD3A42B7CBCE2F53D6BC7A21FC6DD
+:1002D000F5E665B8A47ABBAB1A513A3523909F4D29
+:1002E000FB8C96521CAFFABFCC3C9FF2502AF917F8
+:1002F0003A0A1A299FB2F76DABE13C4E7219667744
+:1003000053FEE4A8AE5F50BCC0794019322F76721C
+:10031000B683F0D61C8ECDA01C9B4B3D2467B54305
+:10032000BFA238B5B6564309C4DACC7E139E430B40
+:10033000AF60E4EF1CD3E132E17A158AFC98BEC3CA
+:100340007F9818A4FD8A8C0F44787E93B96715EEC8
+:10035000C3B4153D9787713D0EB84DCD65D85FBCD0
+:1003600099FC2D875219D24F6157F1DD53A15EB828
+:10037000C645F1B0BEE76E2924FF2ACC73CC10F33A
+:100380002CCA36F3FE0FA59A509F699B980F47D54C
+:10039000DC59D504F78350877E468A3C55193F4582
+:1003A0003F14EAA9F4ECE0D7303FB6FF1CD2B214F8
+:1003B0007E0E49E3FE12E7B2B71FC7F33D3B2CFCAC
+:1003C0009CE791C3136693DF6FADA6E03A7CEEE63F
+:1003D000F99437669B0CE74206F07F84F256471D7E
+:1003E000FA05D76B3016F6AF9939BD686B3D3BD136
+:1003F000BFB8382D4879BA97B545558A9FB94E3D53
+:1004000050AB27EC73B6703DD3BC8FEFCB93F73571
+:100410005FA65F6ECB36DA2DFDF57F92DDF283FEAF
+:10042000F1FFC6FD0A33EEF392ED97E47DDD203B4C
+:100430003CA9BFE1EC18998F523D300EB7A79DD271
+:100440004E0A1BF275AA1DE27CA1CDD8FFE5235C04
+:10045000345F99BF93B5525F8179FAF11F30F2D7BB
+:10046000C93CA27035CFF7099B6C74EED0CBDA296A
+:100470007F68248B2A0AF9D37AE87C6D36E611C1AD
+:1004800077EBB24751BFDB996F8D4AF25257106E2E
+:100490003BE69F50BE6A64EB221CE73A078D63C7B8
+:1004A000FC938B3085C0BF15E5EBF4061E5FC805D5
+:1004B0007D8CF49B3B9AD3A1BD8EE7A1C83C1399D8
+:1004C0001722F1502DF09B3B765111CAC1B54AF06D
+:1004D0005171AE99CBFF0D4E715E19EC6BCFC079A7
+:1004E000E43EC6FB0F3798F8796437AF778CD1F9C3
+:1004F00079A02FF839BB8E729E7732283F2509AF3D
+:10050000323FE5C9B4E011E497E4F3CB924E12D642
+:100510008FCE476F3BC4EDFAEA060BCDA36FC9350A
+:10052000E497EC5B6262A8FFABBBAD9CEE92C6DBCE
+:1005300056676151EC578BD8517ECAF5FF32BB1616
+:10054000D6B514FDBE475A6B2F3A05383EDA1AA0CD
+:10055000B2CFAE74AA17D2F9D2B928A99ED8F2F9AF
+:10056000B55A0EE6DBC40B142099E7B77E3493EA44
+:1005700099F177B0FEEA16CFD73490C37D63E23BA2
+:100580001478FFFF797FC4DB911673197BF7A1877D
+:1005900066861D5F41DFFD9125E7719C41BDD3C497
+:1005A0007A56C5C85F24F45D2597875E8785EC255C
+:1005B000AFC83F6535221F15233B505F99534E71DD
+:1005C0007B07D30FC4B03D8F9FCF8276A2FF956388
+:1005D000B87FDA26E882E549BF544F18E5DBCA2226
+:1005E000377DDF2F8F0F5823DC3FC6C77FE3E90B32
+:1005F00028BE25F36A1973E5CFB980F26C0CF5FBC0
+:10060000ECE21CA6E6CAC773EC2BCDC2EE15F5369C
+:100610006730C58BF3443E047BEE8D2BBF5B867C3D
+:1006200074E6E0F747A35CBBCA02FB8221E4D8EE84
+:100630001C2EC7FACC8E350A7C57E30C8EF0C2FA1A
+:10064000BF953A77061E29A81B31CD82471758F867
+:100650005115F19A29E8C43D87C3E7AE0928987778
+:10066000BAD2CEC7CD0C6A7E3AF7109CA35C077055
+:10067000AF54B8BC868FD2C98E2AD5D3F11C61A3E2
+:1006800038D7AA0AB97149E72615EDF59FB7BE35E7
+:1006900055D306E0FB858887FFA2C8783EA2DCCB55
+:1006A000ED6259CE56F50B90FE56ADF0BC36F31206
+:1006B0007CCEE9F8CAB4659598A77D556A4B25FAB2
+:1006C00069073D4F87E76509752B7FAFD1162FC0AE
+:1006D00073E60BEDC149888FCFE7BD7B27CA873B07
+:1006E00073DF7807F324DE300B3991AF88F5EE988D
+:1006F0009E06EB79ACD82DF23C6C440FC7C6723F16
+:10070000647F1EDB3885F2FA66CEE1E749AF65B15A
+:10071000B61EF89E9C15D03E637211D9913345DE0A
+:10072000C58CB70269E8179871435C43393A9C5D00
+:100730007495D7ACF724F0C3D5BAB17E6DA9B1FEDC
+:10074000359FB1FE8DC97F1A9B587FD9EE9F8DF4DE
+:10075000F4BCC2F33EC3973017D1BD4709A3FD32A5
+:10076000E1995C710E97E727FEABD8773D3399513D
+:100770007BD63EDB2E3C3720FDD7AA689FE065B6CE
+:10078000C20C7EEF03EABBB822F21C3D14D3610712
+:100790006F75713F2EBC6B817E0ECED3893FAA460A
+:1007A000DA52904EB21C267639F252A58DEC9A237D
+:1007B00082EEE4B9EA2A8D0530CF02869C83E51BE0
+:1007C00066D78BE8A70E7FC818E7DB691AE55B8A56
+:1007D00031185B41F587045D1F91F2FF079A585766
+:1007E000E04018EFECFA5C1E872E65745EFE6C65C7
+:1007F00009D525DD4BFE01AE1E8DA14145F427E94B
+:10080000F9A74E0BD1837ABF49F8BB34130259EADA
+:10081000927080B8C9423DC9C8FE9571BA7C9B6C84
+:10082000D7FCF87E0E93757EDE2B4BD4A1296AAAE5
+:1008300040FDFCF2EF487F3B7C419C8725CD46E79D
+:100840009386E3A35D827F7625F1914BBB9AF8E80E
+:10085000A7CE923B08EE6B9C2ED4AFA53097BA0C76
+:100860002AFD232AF03BCE4F6A8A4F47BEF966ED38
+:10087000F1A95A829C86EF9BF8F7A9C6EFBDF07DDF
+:1008800046C2F769F07DD9E0EF773B6D51D344EC78
+:10089000A74AEF217D18A5C95E23E6AD66F1EFAE4C
+:1008A0001179B1A3D3E07DD45BA5C63C1336D967DB
+:1008B000A3FCE4A4BC92AB94E539C85757DB9ABAC1
+:1008C0007BA0BF97C53A5E650A7EE682E72FCF2DF3
+:1008D000398AFC576B8B6898D7772D8BAEC2C5EDE4
+:1008E0009B167CC45D4CF2E159E4936635383603BF
+:1008F000EA67CCEDA36F2D22FE79CE9B39185E49B5
+:1009000027125EA417A43F492FC970F7AFE7D73B62
+:1009100029116F3BD851584ABB8AB1169E77ADE773
+:100920000FCC0B886886AD6534DA352F2F0993DC40
+:10093000B8CAFD00E565BD9C1BFC4F946775177E2A
+:1009400052A0E1CBDE796371DF00F0C6FE37E1959E
+:10095000F6E3A0BCE30F2D86BCE3E1F84C8E1B420E
+:10096000BB50C5FCE49D94471C9AE3F0E1799110DB
+:10097000E6C15652FC8AECC2E7146E6F87159BB035
+:10098000E3CE373F99717BAFA9DFDE33E4D77794AD
+:1009900073B83B6ED5E5FD35DC5E9CC7B83D394B81
+:1009A000B42F7451BBCCC3EFD8C9FD861D4F8FD572
+:1009B000B15FB003C97E60E9C2CE2C32DE9B837F7B
+:1009C0004AD640DEF86633B75FB7997C5594E76244
+:1009D000E1F7E29C91FE8C317CFC64FF626E8E62DA
+:1009E000884FF7D7FF4EFEC55277303F07FA5B5866
+:1009F000E62F504C0817F733027D3E1C6398FED655
+:100A0000321AEDFEAB59CB9BA662A2CFE21CA4CF5B
+:100A100009409FC506FA1C9D93C9E524C225E9B388
+:100A20009F2E4B93F3CA8217603F1DEECE5F35A316
+:100A3000BDDC6DF5F1BC5A9E27982C0712E059A039
+:100A400071783CAA4AF04CC27193E1391F3E49A427
+:100A5000CF6CC6F961387EC9D658D85931C02F2F0E
+:100A6000DB8335087F3FDFACE2FBA34170AB0EA216
+:100A7000AFEB6FE47194502AD747184FC981F167E3
+:100A800089F1AF5FCBE9F0FA7FB110DD02F8518454
+:100A90007FB6689FD5DD447954B36BCC2712ED0047
+:100AA00019B7A913EFCDF1949B9105E6CC34C64B51
+:100AB000EA6EE2F19AEB588B19E1BD7E8EB19F3A56
+:100AC000B6FE13CC0BABBBC9F83C98D31F67198B90
+:100AD0007196A3C28FD007FC82FCF4D3CCC50FDF84
+:100AE0000AF43BF6876515E877BA326BC9EE4D50CC
+:100AF000FFF1B6F154FF69D6B7BFF306B6EF28A1F0
+:100B00007A0D26B9E13E08F911F54DD58DD714C1FE
+:100B1000B847EDA2DF5BF939026F4AB06316BCE754
+:100B20009D388AF2216B84BCE95BC8DBAFBDD0C9BC
+:100B3000535E6FD6C9DF5893C2EFF579ADFCBF2B7A
+:100B4000303FB76694A8573C3F1EEB47954FE81ED1
+:100B500080DE268786F86FCEE57EDA09A54A741C0A
+:100B6000E0A52643F4DFC4E735B3E2D15CE48F9A15
+:100B70006ADECF04DFB4B5C5F89EE92CD57B736D72
+:100B800069280F259FB5E770FD2CEDA980E0FB6774
+:100B9000FCEFB68D807E0336C587530C4C7E97DF05
+:100BA0005FE5E0E7CB02FE220DFDBCD3FD3C7FB349
+:100BB000DAB62207F7E75F0F5A2A715E2E5BF9510A
+:100BC000B46FD2274F9B44F9BE3666463D0774DFAB
+:100BD000417C78F1270569486C0E23DD4BBA9A25D4
+:100BE000E9BDC648D7C0AFDB7232BF5C5E1BE8DA36
+:100BF0003E40D7C3D9B900D78F09AEA946FDD53F2E
+:100C00004E125F268F3B9CBCC0BF44793A005F27E1
+:100C1000F15F1E66C515237FB64BFEEC42382CA64D
+:100C2000189DB329547CE3E960EA307686842F1F4F
+:100C30007DAE1583E1C23F4DDA7FFCCF83FBF23CF2
+:100C4000D10EDFF959C6005C30FE2B240F577178A6
+:100C5000B62B2D5CBE087B5CEEE79BE57CBB8CF382
+:100C6000AD4AE1E7DEBDE87721DF7BF9F87EB8CF5A
+:100C7000631DE47C42426FCFB1059C1698DB75EE94
+:100C80007AA29F1B58F869B48F963983FF17F174C5
+:100C9000C4143E84FB9C85CC4FF157A08F77721211
+:100CA000EC0D096F329E9A8791A7C9F349C6CFC050
+:100CB000BAC5C8BE93E7D8FAE77B9EF3947689C796
+:100CC00062F4776508FF5486F0472145A17E9EC9EE
+:100CD000527CB82F98EE53C8BE98C96C249767D63B
+:100CE000727D9EE1E0F687D4FBC3F1C7159733927E
+:100CF00057331B993837C7E7954C87D9ACE70E2C8B
+:100D000067DAF4AD0B90EFD14ED107E09FE9E07EBA
+:100D1000ECEC5C213F58CF24D4F3FDF5417ABE675B
+:100D200012CA9FE4FBC9669EE3FED28C738CCA99FB
+:100D3000BE7727A19ECFA8ED998472CCE9F27B7390
+:100D4000270DDC1F988CC7D1B92619873B2FFA4C89
+:100D5000E61F193F6B7306C7E238D2CF714689553B
+:100D6000E14B151E97E83F588474EC76154D43FF10
+:100D7000C51C1BE82318BACB15BC3017E9ED8F0052
+:100D80000F6E0EF155C0E37535C17B343E2CE1E1A9
+:100D90003681872B855E3DFBB04AF1891A7FE94396
+:100DA000184208BD626611E2573FE94579BFD8593C
+:100DB00030A0A2F8FE634EB23316BF5A4FF195B180
+:100DC0005B4C4C4FD093E32229867B3226ECCB3010
+:100DD000D42FE8CC35BC7F61D728437B7974BCA184
+:100DE000FDA2572A0CF549B12986F72F7EABDA50C0
+:100DF000BFA4E71AC3FB533F986DA883C6D070DE2B
+:100E00007B9F55D83698F765F16F19BEFFCDB6199F
+:100E1000AF60BCF3A4D8F7B2B03F560A785820E9C7
+:100E2000F6DC7C637F5125AA5421DFF3BF05EB7903
+:100E3000BEF634C05C62BF0BDB8DF6C4E22DC67A11
+:100E400043F7A655281B07E779B454E35539C97908
+:100E50001E35AE7926A4CF502ED817E31011EC62C0
+:100E6000CC331B8ECFBF6CFD4BD8E82F5B7FFEFED3
+:100E7000160BD9F58B5F7DAA2A0A8FAC5EE3FADBED
+:100E800075E3FAA7961AD7DFE933AE7FFA64E3FA7F
+:100E9000BBFDC6F51F516B5CFFCC8071FDB3EB8CC5
+:100EA000EB9F1334AEFFC806E3FAE7B718D7BB7061
+:100EB00099713D8BC24B0DEDC9EB2FE565F19ADBC6
+:100EC0008CEF017A4D097420E96841A081F277C660
+:100ED000B47FCF304E323DC0BED144F7BFC13E6E6D
+:100EE0009B72FEF401D28AFCBDC9F4F16FB9C2EE67
+:100EF000147401FAA813E50AD8174F61593756D868
+:100F0000FB81A1ED0B29BF12F579E2BE7838B93625
+:100F1000484F897DF2B07A0AF7C9F6817DF270F404
+:100F20007B1CB38FC88E5A4F7EA51B5D1C8E4FF164
+:100F3000D125E8CF7D82F4F271007032C07B1CE7CE
+:100F400003E31F4F9940FE8D6FB328D9EDFF82193F
+:100F50009630D8CD98A8ADE23D4F3A95F5426F2F27
+:100F600014FE8F85F6E05BB9DCEF519885E3E6C5AA
+:100F7000E8BC147B6DC479DD237102E30820784F4F
+:100F8000611C01CA5E3BA79BD352AEF899EE49C0E3
+:100F9000E7FCE94A29D9B56A0AE53DCDBF4121FD03
+:100FA00034FF7F781917FA2CB95CB94CE2B35DD8DD
+:100FB00003DC2E48C7C39A1477624107E1CDE7C22C
+:100FC0007586FEB81FFF47FC7CCDE30AD32667D0A9
+:100FD00031335A675C6F3C0FA5DA389C8F9B990DB3
+:100FE000F1398105C90EBC5703D1C6FB1BCFFB7B72
+:100FF0006314FAD354F5FF7CAD06E3CF382EFA9F85
+:101000001D3E86FE66D5EB63E8BF1AF4FCC014BA39
+:1010100024A3BFCEF87BF88778917EC23C412FBBDA
+:101020009D8CFBBD92FC86235590C098BF63E6E77C
+:10103000C3BDDA16BE9F3CE65B634D9837636637E7
+:101040009EE7FB327B08F36D4F27E4C7C3BA0C79E8
+:101050008FE9B43CAEEF57B6365C8671A25E1107DD
+:10106000BBA7357819AEB7AAF9282F0EEF5772270C
+:101070007C6FF1407B029F6A8E0643DDEC08105EB8
+:1010800056B5B610DD98C53D50ABF36E730513FC35
+:1010900012178E14F6862DCC5C594C98C6F0F7C109
+:1010A0007486F3555DDAE9C47DA8D50BFD25CA2BFE
+:1010B000AD9025FAADD7B4B610DCAB9460103BB35D
+:1010C0008E66513BE0DBAAE1595478BEF52A92675F
+:1010D00016E76D3EBCF76738FC59BDDAE78972C880
+:1010E0003FD22887EE6FB55D8EF85AD9BA8CC69379
+:1010F000786B6F755D8EF58DAD5ED1BE82DA4DB5C4
+:10110000BA82F4711A6821867116ADC789713DB033
+:101110003319C603CD5E5B0499C8EAE1F0B2A305BA
+:10112000441F735D1C06F48DE5037DBCB3CC4CFB02
+:10113000D3DBF31DF4FEEDAF8F79D10F7C60011E80
+:1011400051FF8AF9F48F23F06711728869C100F2A8
+:10115000952557237F74866B36ADE3DFDA9FC4BBDA
+:10116000C5CE281FD492EF20BBEB7CE10C8D14F789
+:101170005009BC27E30FF04472F47681A7DBEFE25D
+:101180007EBEDBEF6094C7CE96C15FD5005D8D1447
+:10119000F2259B05A86C6F05C15282EB6563410B7C
+:1011A000E875D6492FDBD1BF83ED7ECD8DA1EA4D09
+:1011B000359E59586E9C7CAA1DD9F1BE4B3F8B6160
+:1011C00089BE74C497AB8145F0CC1FC58E3D781D98
+:1011D00035AFA789F6B43A5E4F17EDE9015ECFF758
+:1011E0003FA9D4206049F1977C47C6D5A351BE2DB5
+:1011F00060FC7CB2B8E7603B13F2C29131AB06DB16
+:101200006F6274BE40B6FF50B4E7384EAC29463921
+:101210003CC7F8FD5681876CC789F6E9149F31B643
+:10122000CBF84AA6E3EC2BF47D99B1FD41F1BDD397
+:101230007136361DDB471BC7DF20DA531D3CEF0834
+:10124000C4213F472FDAEF15ED766CC7F14B8DEDDA
+:101250006BC5F82B9500AD433F9F89F8E48E569DF2
+:10126000EAC97CF6EAC80C7E8E59F0996B191BF21C
+:10127000DCFCAB2379BE4C9ADEE3F70F210F657BD4
+:10128000864BA3B8AFEAB5101D591D428E083EEC3F
+:1012900097234A8B8F1317F7977F193D03E17E8EB3
+:1012A000F2AC00FE909EF3BE6362C1047996DB98B7
+:1012B000C28209EF7B176418EA5937E51ADEF7CCCA
+:1012C00019656877548E37B4B3583EF1C76D82AE56
+:1012D00052CA2A0CEDF2BE02A6733E9276B579F49C
+:1012E00014C37B674BF574A4EDD357CBFBAB7C36B3
+:1012F000940BB7394765231FFEA475321ADF20EF20
+:101300006CA27489D24B47C956B6EAA25E4AF5C7A9
+:10131000DC3CAF7A65AB8FD78B189D6F5ED95A4B8B
+:10132000F5C7812FB1FCD7563F957BA00E160EFB5B
+:1013300011F4AF433F3BA17FAC3F02FD63B91DFAFF
+:10134000C7F287D03FB66F857EB1FE10C085E583BA
+:10135000D00F3E7F00FAC7FAA6D600D5EF6BADA33B
+:10136000FA86D62095F7B636D0F3B5AD2D545FDDAD
+:10137000BA8CCA7B5AC354AE6C5D43ED16A1371FBD
+:1013800013E71F1F9BC6CF7D27AF7F469EF2D5EE8A
+:10139000BBA804455E65C893C8C8C37D75A7312F37
+:1013A00010F14770D8391E93E1182BE018CF622B4B
+:1013B00052B9DCA038EB982EDFDDA9C0A7235BF87B
+:1013C000BA1775C5A93DA7818F3756CC9379C22C22
+:1013D000AF8A1FEFC5F77A9558752A8F37931F8309
+:1013E00079013F55E2DC339179C484706993417F80
+:1013F00027CCB31F5F6E0E27E26D28782BF2787C26
+:1014000043ADECE4F79BD4B64791CD52FC2D74BFAD
+:1014100089AD2E10D5A0F40482744FC2F8733360E6
+:10142000930572EDDCE54C8732AFD1B8FFCA5D5051
+:1014300061D8E7A8E73632FD22E8B7CCB84F4A19A1
+:101440007D9BE13B5BDEF70CED16CFDD86F6F9B751
+:1014500014ADF2223E47328A3B59D7AF603900D7EC
+:10146000C28E4D045750E0BD57D1F9FDEDFBC5EFDD
+:101470004408FBFFC72E812FDB7ADAD78E75F36A1B
+:10148000497AD884FAE7E3A7D2498EEE7DC444FEB8
+:10149000ED712C6242793301CC486CBF006F7256FB
+:1014A000E9CA1C15EBE54C57B17E118BD3BE08EC95
+:1014B000FF3AA417B0FF1FB143FD4C7EF0C73CBFFD
+:1014C0002B4A7ABA44AC6789DC076DD192FDC373AD
+:1014D000F3C85F633C07D626F6012BDC55D918EF1D
+:1014E000ED1D26FFCEE9FDD6D405B01ECE9C3A2ACE
+:1014F000E5F30DBA69C873D1CBBE2ABF6C013D625A
+:10150000E4976508FF99CA9F67A1BBAA79749CF804
+:10151000A6CD2CE5989E8E726CA0EE4B27BBA23B0D
+:1015200087F0A389F5D9DB1AA4FC00394FED77D3F6
+:101530005C980F5622F24FF7B5DE3AB526211F66AA
+:10154000B7A0DF5216AB453D5A5A66F245A827AF01
+:10155000C17F611FDDEEC773FA5A05F3A1181EC7DC
+:10156000DAE9BCBAF6854A7940DA914B980E76B042
+:10157000C31165E1B2817E99F0837C47C8F5CF5CE9
+:1015800035340FAD40DA473ED4DDEC33873F867407
+:10159000F7598799B3E509637BA983919E5B546AE8
+:1015A00089E80AA623B4D33D8BDA0E85E515211C04
+:1015B000D3BDF3508F1F4C25BA4DDD524557C37B29
+:1015C0004CC1F57900C7991EFDA0491A57F05ED3AA
+:1015D00004CB2EB41BC7225E709CD1A584C7856244
+:1015E000BEFB5A57109E9E15F368CBEFC73B87870B
+:1015F000F9FC78CFE9A20EE9BF31CE734365F53728
+:10160000F0DEC6953155D874467CAE33C726CE532E
+:1016100006E002389F453855849BFCBF7C7E4D8F89
+:1016200070BF19C8B15A8ABB4E32B1C4B8AB2CA333
+:1016300042FECDC87311BC4EEFDCA90B2E4AACDFC5
+:101640004474FDB8C2E71F766A3C2FCDEFD713FD77
+:10165000C4EBE47E599C7F4811F0F6DFE3369EE749
+:10166000613A586C0BE62D0DB71FFE252ECAA4C497
+:10167000FD30E81818579D64A33C9F75328F4B7F4F
+:1016800043C77C332CF1FC8A4DD0E96AA731AFE423
+:101690005C1EB777CE89F5E8B371BEC6B8647956DB
+:1016A000C2BD17DDF5E4FF9171CCBE6E9E0F2EFD1D
+:1016B0006B4B0409F41DE578E87B58A5F8E592EE3C
+:1016C0006BF97DA1871EA07B56A12F1DE9A15EBCF1
+:1016D0005FBFC6E8EF59B03BB02A451FEC575AC46C
+:1016E000C2E4D748F62725FB917E9B27F6693E5634
+:1016F0008E71CA93EB8B8FA5E07EA688D1B9DB9162
+:10170000EA93748F3158FBED784F292BE3F7F424DB
+:10171000AFFB250516C2F33EB9AE631CE467D837AC
+:1017200089F3FFBE17CF7E7D0CF4F396AE18CE8101
+:10173000BCA59B098FE381AEB1EC64AC76A8FBA09D
+:10174000B2F34D5FEDBCC0A5C6DFD768EAEA3996B3
+:10175000AA93BCCBCA0778FA8EFD3EAD8CF8274E13
+:10176000BF075157C4E141B8F1FCCB7ED3277313B7
+:10177000E9607CBEC6ED837CD35793BF3546B8CEB7
+:1017800094BD99750D876B1CC2D51B3D919568B7AB
+:1017900048B8F60F73BFFAA55F154F938DFA200175
+:1017A0004F53FF129EF65B86866796C0CF4F8EF230
+:1017B000FB4206B77F45FDD56184F7CC63B1EB51A1
+:1017C0003C02BCB3087FDE5359143315F8EBAC145C
+:1017D000F45929E48E8FCEA8B0D0DB17537E5EA7D4
+:1017E000C6DB43772E8AE07902DF8B0B0AD1DFE07C
+:1017F0003C6EA57B9E42497922B25C2FE6B13F57F1
+:1018000019120FABF3B9BC78F1B5F9D4DFBD6F593C
+:1018100019CA83ED22DFF55E57A70DEFEF9578C467
+:101820007A0594214B7C112ABA7B2B3FB3E98E2198
+:10183000C633F1F1EE4BE21B399E2C57E49772BB95
+:101840005439AAE23987FB2E7D93EED9BAAF5223E1
+:1018500099FB37E37F7D12FEA36F667D9DD3CB8A14
+:101860007CF4A32AEFA57D03EA2125FEB332C49FB1
+:101870002548F30FBD6D653B95C1786A14F42BE7DD
+:1018800027E72FE1765EB680CE99E07A20E0ABC5FF
+:10189000FB524FA40BBD87F3223D71A9C6CF894CE3
+:1018A000D2685DEF9B3C85CEF5EC17F914F14B2C1B
+:1018B00043FE2EC333026FF79EFB450CEFA90D7755
+:1018C0009BE95E05A6F578BF0974147A5DA37B9A3F
+:1018D000819E6AF1DEA8175F3B9B86FBE803F966F1
+:1018E00082FB403E97877DE7D45A3A6FF3DA672E42
+:1018F0003581FE9FCE57855D128BE1399A8D15FC9F
+:10190000DC8043D8018ED74E3520FC8EC9DFB32A48
+:10191000097A764FBE95BEDB688967F9300E744848
+:101920006551EEDFA1FBEFFACF0BBA381E9A2B8F71
+:10193000929DE0E8E6F7E23D9DAF135C08F7417841
+:101940009E32EE33573DB657C278A306BE77BAF83B
+:101950007AA64CE2F7D0DC77E9CF5D78EF5EBAC2C9
+:10196000E8FEE84B0ACC06395E5FC4D7A1B3321655
+:101970001B85FCE5D228AFB6337A9B0DED7AC917EB
+:10198000A347A9F4DD6A9197BE7A7229F199A4E37D
+:10199000B905C157916E36025F3C49764E2C309D99
+:1019A000F0E32AC7FCE3C795581DB73F2C2ED42F70
+:1019B000A5269381DF8A0B38DDC812EC52B277EE90
+:1019C00010B42CF57D5BC4C630BFFFB7E766A5A396
+:1019D0005DDA9627ED3CBF0DF1B55D09A417E1383E
+:1019E000FFA5D2BEEFC5D74E34E0B86D302FE4DB93
+:1019F0007B7EEA588FF6499BCB4F7C2AC7D7DC26E3
+:101A0000B11EBC9FFD16FF2BE86F8CBBF97D4447D0
+:101A1000A65C6343FA87F74CD8CF7BADF80B1AD896
+:101A20004F0DF90716BA66CFC0EF16B1E02AB46BB6
+:101A30001775A8867B17EE11F262E1B914164DD81E
+:101A40001F2C9CFC2D3A37B6F05C1A8B82BD758F2B
+:101A500038177D8F3857C40A383D3B44E915E5DF18
+:101A6000CCF7BE24BD95F9CBBDF339DFB302E8B79F
+:101A700049E9B114C1101BA7FC9ECEEBBCD7EA62AA
+:101A8000D192047807CD73048B268CD3FFDE391BEB
+:101A9000CD67607D39FD0ECCD7417878AFD54B78D6
+:101AA0001CBEFF91063C0EF43FCA80C7C1FD97D013
+:101AB000F8EFB5967E49FF1386E95F37C03FD0EF58
+:101AC000681AB7F7C8FC1FA702DF1D89DEBDEDF954
+:101AD0004AFC1D332BFD7E01EBEAACA673848F33E9
+:101AE0003A677AE7E1DFBD83F99A77EEB2F8708C56
+:101AF0003E737CAE6F083D339AB9C2789F972CC76E
+:101B00001714D37C929FDBB4880BF3326DA59A0B2C
+:101B10007F1FD1C66291BB71DF5269233927E3422F
+:101B2000B2DF3FE5A9F23C3BC907796FCB12919731
+:101B300057EC085E81EBBED4D4DEFC13F8F683D2FA
+:101B4000363A37CC989BF633326EA3E12FBF15A3FC
+:101B50005F30C0F0FCCD137A70067EF74310271873
+:101B6000C7512FD81DC4BCB50D62DFB8C11EF3FA32
+:101B700012E4E60D05DA57B317DA93E876D22FF7B9
+:101B80004639DDDE50807E2235F6C4FC22CCB7ED2E
+:101B900011F776E9168A77551EA3FBFEE6CB7DFF8B
+:101BA0009AE4BC8E7C37DAD132CE94867977686B32
+:101BB0006CE4F7BED5A7F27AFD7F8CA07310B0FF5E
+:101BC000492D43F9B25FE5FE2011DF3A2BE6D067DD
+:101BD000DB5840F9F7221FE46CF74B74AFE4D935BA
+:101BE0006368FDEB5FF83EDD0BB73F97EBB1BE439B
+:101BF0004ED263F5565F15DE5BB83F97DBAB9D5A5F
+:101C000034AD22C17E5D9D574DF2F9E335634C89B9
+:101C1000F18FEF0A79B051FA37B578159E67F9B8A8
+:101C200032FA33D2A307ECF43B51A683BFABA2FB3D
+:101C30002D375AE97701AA0F8EDB5C87FBC3348D01
+:101C4000F2914D07ED04CF9975FC7E2DFC16E55DF4
+:101C5000D3C191F4FB56F5A971CA276C4AF195607E
+:101C6000DCAFFEE054BAD7FFE486710528FF4E646E
+:101C7000EA0574AFF1063CF409F54363F9F3B517CF
+:101C8000D37955E7C6D4E0507E10A98F92EFEFDAF2
+:101C90009F5BDEDB85F81967F3A1FC7D4FF1F1B89E
+:101CA000EF2BF1D93AC515F9F9D27AD769FA7DBC8B
+:101CB000FA8E776F62F4DC43742BF773C9E3D50BAC
+:101CC0007DB5DF129F8BBF4B56BF52E05DFC4E626D
+:101CD000BDA99C7EAF4FE27D63D23DB74F08FD2486
+:101CE000CB93AF69745F20D81105E81F3A79D84AC1
+:101CF000747672E3043AAF2EC7AB079CB8802F4FBF
+:101D000064E813715D9F16F2AA7E25DFA7CAE7304B
+:101D10007E0C7FE7307E48A5BCAE3E573C0DE3927B
+:101D2000F23D59EF9F4FB74ABF97B53FF7455A6FFE
+:101D3000A02786F4647AC1497A3AF4827517AEE72F
+:101D4000C7952C8CFECFF05BFCF7C78E1CB292FDC2
+:101D5000DC779CEF6F07DD9FE68817E0FDA1A117F8
+:101D600046921CEBCB8FEFE0F6B69DDFABF846F06A
+:101D70006211FFCD11F711E6A09DF7F9217B14ED5B
+:101D80003C28299E1066BBBDF4FC702A43FF0F94CB
+:101D900014CF63CA012FFDEE0C6B17DFC7E8FB3BC6
+:101DA0000B8263512EDF590CFD3BF0FB53F4DEE751
+:101DB000A38217520C8AB15C315E2EF59B1F2CA4B6
+:101DC000E7CA675EFE7B2AEDA23D46ED216BF0621D
+:101DD0009AC7AF9C6CE710F3FCAAF7EE1D2D1841D3
+:101DE000EB28E1063C93DD988C97B30526F17B3B0D
+:101DF0001C1FC974D9BF9E5F021FFA5FE8BCF621A1
+:101E0000BE8EEBC659B81C593B81EC63D69662C8AE
+:101E10009F5B7188DFC3D0BBC149EBDC67F63F84B1
+:101E2000FA28FE8699F17BEDC022403FC5E4A1F976
+:101E3000E523914FBF642DCFB3FBE8D1F70BE63913
+:101E4000F05CF2FB8673C9D25F089DA4A13FC6E196
+:101E5000D3D3E697717B5D25F8F8EF7A6D34EBF418
+:101E6000BB6BE10DE3C81F71D2A21FA4DF875B77B4
+:101E70008109E94A2D17F277139F9FBC2F4BDE7B18
+:101E8000958C9F8AC262927F4D2C7833DEA17E8230
+:101E9000E959C26146F7FF917BDF8469889A9FE226
+:101EA000B6AC85F4C2E07BF62C5FF2BB6CFFBBF5F1
+:101EB0002A5C2BF4EF9587D350AF7EE0E2FB463AE5
+:101EC0007D8F7A5DE5F36CC30F30AF8305A6144EAA
+:101ED000A27692871F28BC5DCAB941F3477AC17EBA
+:101EE000F03DE8EB9A42EE7F63AE0C71C82B6CC1FB
+:101EF0003C4DA99F428A66C273F3A7DC7A1AD2E3EB
+:101F0000A9B5C5192B300FC6AD6725DAD5A1A38CAD
+:101F1000CE8BEB78DFF8C5F8FB32FE89E8F7DB9F64
+:101F200061F43B24C3F3E4B49EB989ED730AB99E0E
+:101F30009B5F28F699854CE45726E38DAFFB62B191
+:101F4000EE6A79F072DA8726BDB7784BBAA087A41B
+:101F5000E7EDCF7F97F2A01E36DE1349B15F18EF91
+:101F600083572C61E5422C5328AFBD611397730D45
+:101F7000AFCE2CB98BD7E95E85693BEFA1DFE35982
+:101F8000B0EBCA12C6E516AD83A4C70505FE12B4B0
+:101F9000E3E25B5517F245C31695E051CD3ED756A7
+:101FA000787E7A8B99ECBB0601CFE9BC601AAD9BB9
+:101FB000C6340BE0FDB4164C23FB75ABF8DDA1A4D1
+:101FC00079C07B6F6A1543E0C7C6D799F0533C04CC
+:101FD0001DBC61A2755A80BF0B8970EC54C8BF79D3
+:101FE0003A3F7833D64FC1FE1FCFE9AB9B96D07DE9
+:101FF00036C9F83E6D0B127D2E16F391F84C1E4734
+:10200000E2B30FF189F6D22B5348EF851E5491624B
+:10201000D98BDD9FD2BE7CDAA12BDF998ACF3781A5
+:10202000DDA2A39E1DF5B36FA39E5BA3528C7AFE27
+:10203000A1E22C96A4AF71FF39FFF53969A6043DE2
+:10204000A93EC8F1A43AE7A42DA4F7CF7E1DE9EB81
+:1020500084EECBAA4878EFF1C2FEB88361BDEA37BF
+:10206000FD210DC769586FA679C975E9C379A07CB0
+:102070006B4F8D20FDF7E5C5A95FB94EFDF48DEBE3
+:1020800020E909DEFBAF429718274CF2E85451B023
+:10209000CA37049D2C7A00C6C5FEB638E9FED2F3D5
+:1020A0001D57E2A37FBD055F531DD7714711F9D1BD
+:1020B0004D6F6874C8E044FB5505C8C7F5A02FD024
+:1020C0006F51AFC4DFA17B640F59E91EE6FA4DB72B
+:1020D000DC8CE3D51FB79AB0FDD4E1AB26125C4986
+:1020E000EB0A782A188ADEFB8AE205BE04FC813DF1
+:1020F00041FC2DE7930037C101FB29BA8FA8AF0837
+:10210000D633410EBC59C8ED2E78DF6521FAE6F7CB
+:1021100061F5CFD795345F57D27CDF6444DFCC17AD
+:10212000A4F92C78DB6AC2E70BEEBFB604F73DA733
+:10213000D64DA7799DCAF04F44FE3A5500FD0F21B8
+:102140002F17DC0FF32CFB0BF36CB7D37A0D3BCFBF
+:102150008CF80EF617E6F989A04339CFF7343D0D18
+:10216000F3F943CFAA0CFD2EA1FCC0C6A9BC4EBFFB
+:10217000131732737A086D4AA57CDFDE6EFEFB040E
+:10218000520EC078E7490F26A28753D5FAE6C9D088
+:10219000DFFF073F3717B700800000001F8B0800E4
+:1021A0000000000000FFCD7D0B7854D5B5FF3E73D5
+:1021B00066269364924C12088140983C09908449A9
+:1021C00002888A767804D1020D4F798993071042EC
+:1021D0005EA0B5696BCD4002A2450D352A5AD401E7
+:1021E00081A2A20D0A0A15BC032A6245C5578BB607
+:1021F000E526405179C6A05EAEB5D7FFFAAD7D4E5B
+:1022000072CE9054DBDEFB7DFF7C1FDF669FFD5AA4
+:102210007BEDB5D75EAFBDE7C23DAACBEF16E2E4DA
+:10222000DD056FFFBC17A5F7AA2E81FC58DFCD0294
+:10223000F98FC32CFE144A938BA670FE659B6BA589
+:1022400022C489A6BFFD41A1FC857D36B7A0F20B53
+:102250002945F7CE467E8FEA5A41ED2F0C689F251F
+:102260008673B9D844E5EA5D239A502E1E1EE6CA4D
+:10227000A0F2F20D61426409FEFB56687F23E93B40
+:10228000520BA56B556F7834A54D2FFD44C9A56F32
+:1022900056378F57F3AB24F7DD347EB95558EDF937
+:1022A000A8DC9E392D4788F37B6D1303D9323F2379
+:1022B00087CB3FB052798D5DF85AF87BAD7D6A0EC1
+:1022C0008FE2B6D2388BA90F914AE9FA18EF60EA8B
+:1022D0007F318D9342E37D8BBF1F5C0EDF0ECBE71A
+:1022E0000B8AA89F7B6D62F673D95DF5F434DB4DE4
+:1022F0001DF6466D7B573B558825C63CE1A122243F
+:10230000BF14794757BE32A4BC2AA47C47BFCFA7CD
+:1023100014392F1F7F03C61FD185C7120D8F3B2C89
+:10232000F41DEB728F12D844FF2DB1BAEDCB09FE2C
+:10233000E7C6889BD14FA95538AECD47BD0E9E5FED
+:1023400089553486E5E3BB87EBE9F3A6FE1AC3E2C1
+:10235000281FD1CEE353BD8976439EDA9BE09AAB2A
+:10236000C1A3A74BB785BB4EEAF3A07F552DB1A6FD
+:102370007CCDEEBEAE93067C2FC57FFAD2BF49342A
+:10238000FB91C08BFCABDADD7A3092E8A74DF1CD42
+:102390007553BF170E7E1D9DEDE6751F5944EB9BCF
+:1023A000AFA63E7F98E6DBBE47F56C42BF6FD8FD17
+:1023B0004A0CFDE79B8B0F6EA7EFD52FA789BBDDDE
+:1023C0005DF30FC5E385DD17A353E9FBF943F60879
+:1023D000318CE6B9377EAC9DE862475C7BB778AF5D
+:1023E000D5D65DEFEFBCB5357AAAA1DE79D11A3D1D
+:1023F000CD402F25BB2FD68B5CC69F5FCDEFC2EFA4
+:10240000897DBDC7AAF4BDF4F7FDC65A28BD5FC3D8
+:10241000DBBD36F7136B096EFF9E30CF1682FBFCD7
+:102420001BB32D687FFE8D722DBDCDCBE95F4F2490
+:1024300063FC688BA4777DBC356E0BF7536A697BB0
+:10244000EC1ADA8FA5BFEB93D290D2555E6AC9CF52
+:10245000C43A6FB7B52F00DCE715B14689EBEAE760
+:102460007EB79BDB9FDFF3C963E00F27EE1D904F24
+:10247000644DF941B93E2A3FFF5141A68BFA3D7F99
+:102480004F5F0FF8C2769BFB36A6B7BBA23CD8F7CE
+:102490007A7F18A716FDEFB962A40FE947125ECA4A
+:1024A000E7FAE4B87E25BFABDF688BFBBED1E0174F
+:1024B000BFB779B650B2FCEF697D62313FECE76E91
+:1024C000D6A1744D98709BF8C94A86BB4478EC221B
+:1024D0004D960B03BD958922FEBEB0C9FC7D11F15E
+:1024E000097C5FBCDEFCBD5C34AD6EA5F92D09989E
+:1024F000BF0BDA3FFE04EC6BFDAFC55E14057AFF3F
+:1025000036CC544FF835FE401F095F25B41FC1C7B4
+:102510009E5102819558DFBB549E67E8BCDE75A7CB
+:1025200070BB8722FF6741AB615D8F5B843591F0A3
+:102530007ADC2E1C89F9E8470885FAF5EF0B0B6C5D
+:10254000A126770FFE2AB9047CAF31C22208BE5BF8
+:102550005DE07C42ACD8F74932FA295D53E86D352D
+:10256000C077C1E67DE8E7D4BEFD5DE2D754EFF861
+:10257000D840D35882EBF8DDAAA7A11BB84EAFB163
+:10258000884001E1E32E2102F1947FF293E4625A44
+:1025900097CFB67C925C62A47F45CC36D2A39E12C4
+:1025A00024BC3EEF61EFD2FC8ED35C309FD07A5DCD
+:1025B000EB6B8657C767B82A6ABBA387CF40F7542F
+:1025C0009EF5775578B1EFF7D902A0CFC88D5F3C63
+:1025D000380FF4B9D7E64AA1B16BF6A95E95E62D9E
+:1025E000F6A8810C9C637B4F4457E09CD953E05282
+:1025F0000DF3AED9A316E17C39BFFB62426936F711
+:1026000033C5ED44FB073CA0DF9EE0F89B5BFDF784
+:10261000F89FD7CCFFCE657F907003F8C0C6539962
+:10262000E0EFC407FFE6A6799ECFFCC68EBC10ADD6
+:1026300023417F045FB49BE0BC10F82A5A105C8EE3
+:10264000BDAA37D0CD3A44A5D8194FFF327C130923
+:10265000BE842EF8089EA894115D7056BBDBED3841
+:10266000672F38A273C14F694293F212B4F3C90DB8
+:10267000FE5A3A49107F1DBF67E1CA70C80B4D8AE8
+:10268000278CBE97ED55F9DC2ADB1B19C016183FC5
+:10269000C8C9F9D247D54018E527A8A3FF309BEA5F
+:1026A0002FBE47F5D08E14FB37DEF6071BD6758399
+:1026B0004DA01C88035C4B34B896ECFDE1670A8D95
+:1026C000B378DF2D0730CEE207140F17A8F3EDE83B
+:1026D00077C9438A88574067B6E3463A5BD864CEE9
+:1026E0002F12AD0B5415FCC1FC9DF09E5C41FD9674
+:1026F000EF0E73DD8DF102A1E542BC4AF0D468FF14
+:10270000CFCA583BF700D5CFDA68673C9C0F17E279
+:1027100008F6ABB53541200DB626631DCFEFF96B3A
+:1027200032D6B1E677FF9529BA59BFCEFDB437AAA4
+:10273000D7A94821AE4E51C4B7A9A0FB8B538ABA82
+:10274000A96F1B20F7C5369BBF9F87CA0F6CFC8AF9
+:10275000F9C1853DBE81AE6EE8B76BBFFAC32D8966
+:102760004883E102E9F016D70DD827240F62BE3561
+:102770009B564FDB44F9F0976C38B9444D8693F77C
+:102780000BF6C74243BFFA3ED906BE807484E40FFD
+:10279000B601F21C3DAA9D7BDBF6774CC9E8069E8C
+:1027A000A36E1BD7B30D105CEF5977D15CD05B845F
+:1027B000C51F0DBE2DBC5E772FC2B3A2D157435D9E
+:1027C000AD82EF89A289D3FEA285D34785F0395126
+:1027D0005F785CC0B3100362813FDEF38CCFBECC68
+:1027E000377FACAD217835E8C41F2B025BE8FFEAE8
+:1027F0004687506320EDB546A35154CEB4FB065234
+:10280000B9ED03D5A240DE1DA0AFA7C785FDF7A592
+:1028100073468C71FDF61F2E9988FEAA76A9228C2C
+:10282000FA3BB7D326824ED4A7FD027C1CFEC29E83
+:1028300002BEB4571190976B288FEF35A3ADDE80A1
+:10284000012F77A4D8180FD52999F29CB67A0F4D8D
+:10285000A27ECFBB4AEC90EB6D87CB26E2BCB125C4
+:1028600096D801D7FEC3631D2958B7582BEF9BD5C7
+:102870007BF5718FB8D07F54EC070C6F63B645447D
+:1028800053BBC6A3610146A643F2A1300DAF8DC173
+:10289000F10E7737EBE317E393C4282ADFA94E0440
+:1028A0009CE75C252EACA32D96E8EE0A6A6FF34EEA
+:1028B000BC9AFA0D8B8D8B077C6B52D2783DBF8A08
+:1028C000AD6538BF22F1C2CFFBB7B608F9C6FE65C9
+:1028D0002AE3BEE921DECF350E397ED43E95CF51B5
+:1028E00071A543E3DBEFBB4A699C05C9BE47410FB5
+:1028F0009DFC6DC4AB02FC39CB6261F9ACF135E7EC
+:102900005AF021BDFC6C8AA4377D3D56F5B2BAC0A1
+:102910003F1ED5E87395ABC8916F98A7ADB745C377
+:1029200057910378DA612F3A84F3A59DBEE3DC3C2E
+:102930009038CD013D85EA59D0CFA97ADA3176F4C5
+:102940003BC301FC2EEA553201ED168BDAD5D86F68
+:102950008BD7AB2268E0AB8D3639EEA24B11221833
+:10296000DF35EE225A3F6E7F295A04E9DC6D0C9761
+:10297000F51AA3E4FE792345EE9F0FB5F9B469F982
+:102980007F99AF7BCC7CFD5CEC1FB69648FEFE4683
+:102990000AF55BA5B44E48A1F9AD4EECB003BFA754
+:1029A000EA5D22986980F7B279C68BA061DCCE7AA5
+:1029B000971C3C9FAEF57033FC5DF375321E4ED50F
+:1029C00027321E7BEE3FC984C7AEFE534D78BCBC98
+:1029D000FF4C1EFF547DD677F43FB487FEDD26F80A
+:1029E000BBFA4DE771C56EDF40F0973B5DC40F98B1
+:1029F0006E885F50B95DF13D7E35E4DB8FC204E443
+:102A0000BEAFC27D835C06FEF00DCE65D6E782497F
+:102A1000E0B77ED1CC69CDEE8B13D0DE4D7C01FBCF
+:102A2000492FAF11ED0C27F885E88335B4BAB97C8E
+:102A3000B76F10F4221D8E4E79E675A7DF42FB209A
+:102A40006CDFDFA3B18F2F58DBA778286DD9AB4699
+:102A50001AF7757CAAA4A7B103BEC86DA5EFD56807
+:102A6000477CEFB697970E027EAAC3DA7301F7810F
+:102A700097FF968B73E4AB7D4B07E2FB36AACFF250
+:102A800087BDBDDA63E82F5DB8FC96515DA933556B
+:102A9000EEFFD0EFDBF635F4031CDB89BD09920BAA
+:102AA000ABEB2A0A4EC6830D79EF07FF12C4B75865
+:102AB0001FDA3D5D1D03F9EE439279283F7C8F9428
+:102AC0001B860F10014B0AE4BE0F67834F548FB073
+:102AD000BBA00A47E41D61793B6284C3A550FDBFDA
+:102AE000F797E3DB212FA4A17D613CE8F9CA64F1EB
+:102AF000EFC96D1B42F64FF0BDEAED345E95DA3A50
+:102B0000659CC2FB283F157CFBAD2FDED6F4D704B5
+:102B1000ACCF019C6B04CFFB5A3F65A9BE2B50CFB5
+:102B2000E768BDE70AAA377356DF64E847C59A7EAF
+:102B300026261152AE647E94033BC8E5E7B6D483E3
+:102B40005E527C3EE0C1DFD7E1C1F935344938FA45
+:102B5000125E456220751A8D3B21D5A2DB0F14C091
+:102B60003D449BE333FD5A96C7F2391988031DFD96
+:102B7000B3E34E4BF54E06FC7AFD0F67CDCBF175F6
+:102B8000736EE8F2BCDDDEB20C70B65739597FFCCB
+:102B90000045D4EE89596141351A7A8A730DF4F9EA
+:102BA000A3910B0EF6267C8C8FF2CD43FFB36FBC46
+:102BB0007E35F2CA8178F772D07371EB48D6EFC2D6
+:102BC0007D37A3BCD2E11B9840533C37C037280661
+:102BD000877C51BC5C27519453D42DFC129E6245D6
+:102BE0008EDF18E52B473FC596238F5D816FD62377
+:102BF0006C6F108DBDB99F737651DE9DFCAFE3E124
+:102C000098368FFD3671ED259ADFFE75319E06826E
+:102C1000B7ECCE1B17D450BAD0529410544D70DF7D
+:102C2000964A5D57FA8B07F62579EE9C4D83BB4E8D
+:102C300083DBEACA34EEE750B81B7479E5170AEB78
+:102C400083FC47F917FDB181BB291F66B9F8C17430
+:102C50009C5B3916B6936C88A0BD457AE43B1A9C00
+:102C60008FD2BE73C4F1F735F89E1821DB273E687A
+:102C700009C07E5034760FAFD313D54E8F4A6315FB
+:102C80000BB71D7250A9F0B2FEFCD7317FDBD74ADB
+:102C9000F36A4EF5DD07BCDD1C6F49FE80E1F00DE7
+:102CA0009D0A796BB49CC73F9037791ED384CBC6FD
+:102CB0004299586B81FC31CD25A7B25091FB63BA84
+:102CC000F0DA30DE4CE1E37AEF9DB77BA14FBC0731
+:102CD0005D88E0BE51F8F9FB1C11E0749E0872FD9E
+:102CE0009B442BE7757C137DDCDC4BD2C7277D54DE
+:102CF000C6FF56C0FD6E64EE803A9AC7D48706655B
+:102D0000B07ED5DC9BF1F35D704FD5E886F6EF6FB2
+:102D1000B18ED8BF33A89F693784ECDFF1BDF5F5DC
+:102D2000CCF847FBE84847A7FEE4EC4B78B84E5B8D
+:102D3000D2EBBC4B597F12C2C5F2D18FB47D5BA8D8
+:102D40003A452F5A9F236ED297089689639625623B
+:102D5000BEAFAF106F15D03ABE3E46150D5CD3CB5B
+:102D6000EDA668FD4DE93FE133D85B0F8B60AFE125
+:102D7000D4AEF092EFD518827B8ABABD3196CA27BD
+:102D8000F627BDC6C0EFAEEFB5C30AFDEE8674F3FD
+:102D9000F749D966FD67B2685231FE94E1E67AFBE5
+:102DA0008127A2B3F753A5FE22868821DFF27A0B92
+:102DB0008B713E1D932EDA2F101C1169BE8FB12E20
+:102DC000CB27FF7501C61556399FEAB755B6EB1DDF
+:102DD00027798B28509CACA7932253CA25C87F4AD9
+:102DE000F203D2D3F56E4ECFD2798FF2F3F51ECE29
+:102DF00017A4159D40BF256B3EB7627DEE0C97F87A
+:102E00002E6F699A00B02A76B71C445A162C9A8005
+:102E10006376D1A1DA8348EFECD4DB6A59BED3E103
+:102E2000BE45A3D35BA2A6FD3087D6E1963DAA8717
+:102E3000F303A64D9FDC0B791BE77BA2A3AA4B44AF
+:102E400033245754ABDE2F0197776FDBC1789ADFBD
+:102E500027F5A318EECFEABD0CF799FA899C4E4AE4
+:102E60002BFA1BE8CC2B3E67796CF2F6366B12D549
+:102E70002FF42A5EECDB6BBD2210A0FDB7DE26CF5F
+:102E800081F5740E601F8FC999F6E8AD027CDA6790
+:102E90004BA37166DEB0A410E34C19556C45BD1B05
+:102EA000BF211920A58B4EBF8BEEF5F95769EB7644
+:102EB000EE6585F1D8B1332D0672C1F25D697D9062
+:102EC00012BFD4F5DD48E0ADE39285E1EC381AC1DC
+:102ED000FA86DE6EF9AE48E63BCB07D803C260B790
+:102EE0003C43EB2C0CF2E699677EE2369E2B67E2C0
+:102EF0005ABEFA18FCED2F92BF916473EA11F0BF2D
+:102F0000FEFD3CA093F39A9C4D7A4624CEBF6ACD39
+:102F1000AE08FE84FC990869CF1DF96CD258EC2FDD
+:102F20008C471C4EE8FC2BF3D987527FEEEE1A6FCC
+:102F30005BCBC28F1FA1FCB980C56FA3F3E99C686E
+:102F400039FF3BF0DFCD4EB6EBDDA9103C387FB743
+:102F5000F4E37C96628DA8C3F92B02BCBFB314B70F
+:102F6000B58EF855E5730FF703FDBD44381845E5F8
+:102F70002FAD8B647EF692CD73AC0EFD3D2AFBFB2C
+:102F8000CDBD3F3DBE1BE93D55F93FC5F2A4C5315E
+:102F9000FECB7EB56408DAD3F92EFA527F4FBFA874
+:102FA00004C3693FE734EF5FD997E01BB6A1CDD2E8
+:102FB0008FD2BCCD4A03D2A1036E3804BBF30D6996
+:102FC0006E6E5FB03D454DC236EC17F8F8077CEEEB
+:102FD0009BE581ECE6CFC7F6135D72C110A5E5F461
+:102FE0004682352CF968BE8FF1D7C4F3D9B577FA8C
+:102FF000FBF304E6411207E02EB67BF81C0AF83713
+:10300000623DCFF9B23CACD715F91F069D9DF32563
+:1030100078702EBD407AFC55A87FCCCAF37C71F342
+:10302000BBD1B0EBC4907E1C0E7F485EFB04D4AFD6
+:103030001AE0167E6A3FE0B1EB26023FD53B776D82
+:10304000E47E2A1D1EE8B9E5BB2E1E4C829C78BD8D
+:10305000F064800E77CAFC2FC77B3D2A4DB57CE318
+:1030600097327FA488F345A4755A51BF54CA470FBD
+:1030700069E79F68CD65FEC8A4EDEE5AAF5F523197
+:10308000CAD7A7F8FBC2AEAD9F9B74DE55A561AB56
+:10309000D865FB2363E725335EBEE77967D7CE2D7E
+:1030A000BDBF87ECC21F4EFDC06C033BFA06BB3CA4
+:1030B000A7B7107F01BDE8E7348DFB0BEC5F6AEF2B
+:1030C000053F4D52959C9D848FA487C258CEF8BE73
+:1030D000E3CF8E59CDE7B62E67D544483EC8670585
+:1030E000B55F18E5BB0BF35BA89DF3C2EACE861C67
+:1030F0003223CA7B37BE573ADA9331073A3FEF455E
+:10310000BE5A25B92BCD207739E3BED7F95917E53B
+:103110006DC67CBE6FFDB19104670C525DCF22ADD0
+:10312000A35B7E9CBABD05FCF88130C98FA30A98C9
+:103130001FE9F30BEDFF15DAF73EE233AFD179E289
+:1031400023DC8F738EB1F27ABE6AA93C48E770A186
+:103150001C01846C8D1DCE796F14E16FBC5315BEBC
+:103160006EF4453DA5F57A1EF899D02BD254AFB038
+:1031700057AC1DFBF7FBCE5BD5D6478DD0F9A9BB6D
+:10318000977076376F39CF5BC247F4015EC62ADF8E
+:103190006FBE0E5BD141ACC338671E9F8BE39C535F
+:1031A0008FF904C37F18DF43E7193A1FE1F87EF275
+:1031B000D28F15E1B760FF7D6E67FBDA5E5BEBD304
+:1031C000BF257CEE5D92ED819DE805F05EF0CF6855
+:1031D0003BCBB37BA3841F7C65EFD48400EC452FED
+:1031E000414F04DFE82D6479B8ACBF770E95537F6B
+:1031F000FDC2685FC05E342F42EB9F0646FB157D23
+:10320000B87D8352FB660EDAAF8864BE733420F952
+:1032100078736C709E4ADF9B3FCF14A8775404D616
+:10322000A4A2DEEDD25F43E54935D46FF3922112BB
+:10323000CEFF51F9DC68CEF3F68D73321F67FB4C7D
+:10324000F3546F5FF8AF7A69EBD5BC5196F7833DC5
+:1032500014E52994A7F4639BAC3F57ABF7914697CD
+:10326000B4CF990FF8A6445A41E7FDD24BC2D29988
+:103270002979FBC2EFF3485906DB28E7565C9FC269
+:10328000F4A3D9CB666B7C5BEF0F0D1C23212FCBF6
+:10329000BF390BB784839E679687B741EE3B5ABE12
+:1032A000320A7AFB4C9F1A0C835C39A3D0DB29AF1E
+:1032B000A5625CAF1CB74CD7FF82A5C0EBCBED0E6F
+:1032C0007137CBF7C102A33EA5AF6F55CB9878A35A
+:1032D000DE5C6127FE42F02CD1F66D9AD3D73B7DA0
+:1032E00004F4E9EBE38DFAF4A7650FE4F2FED2C62D
+:1032F0003B5BEF8D3F990EB96D22A7FA789D7A0F4F
+:10330000D64DE757A097DB25BD086BFB478B29DF20
+:10331000307B8807F6EA89D31C4C6F1D2DE12C1FEA
+:1033200037CC8EF0C26ED7B02B8CED06376BFB839B
+:10333000F428A61BFFBE28EEA7D22EF395CF65304A
+:10334000DDBC600F3CB915E52F87B37FB6325A8ECE
+:103350005BF9BB248D2EBD29AB7AB15F8EE9A53216
+:10336000C21DC3E5BF8F677A7A36DC57007C127DB9
+:10337000B25DBCD21ECC8C25FC1FD3E80F7A23FB98
+:10338000F56AA3986E8596F7FD3C9EF538927F7995
+:103390003CDF7D4339EFB37BFB2EC43E5A1EC9F0A0
+:1033A0001C73C9F26395B1BC0FE6DFB7F430FCC5FE
+:1033B000C78AECBC5F8EED5559DEFA739D1A849F67
+:1033C0005BA7CF9A25C7DF86F9A8BAE1A3E4DDD4CD
+:1033D000CFFC955593D06E7EC5ED5370DEF69AF610
+:1033E00029FB6943F7F3FC4AB37FD497EE9D8CF930
+:1033F000D56407761CA47E1E9C736A11D6D39FEEFB
+:103400009B86F53E6F6F7DE14F0477EB8A3FB25E9E
+:10341000747DB46F26BE5FD8F31BAE5FBDF2BF16DE
+:1034200041CEAFB64A7AD1CFE31A8D7E45866F1E64
+:10343000EA57AE7C9DF581C8EC23927FDEFEFDF855
+:10344000CEE9BD5B5E50A8DDD288BDD59CAA815C6B
+:103450009C6B679460B492067C4A3DEDAC2B188D52
+:1034600075F159A49CB8745B881F184B91A0D97F43
+:10347000A8DDD21619BF42F2821DF4195A7F297DA8
+:10348000E77ADFF37B856891DF6377DF7BB55CF7F5
+:10349000607038FCAE199BB0EEE776FD26D3E87776
+:1034A0000D4D2F8757CEFFACB65FCEEAFB65B6BD9C
+:1034B000D35E00B9EBFC337D4C7476FEC9C19C3FF2
+:1034C000ADB42B114A977F57785A46727C8DB765F9
+:1034D00024E4E707B5EF4BE35B4682AFE97C4E3867
+:1034E0005A7259FFCF6AC985BEABF34751D492C90E
+:1034F000DF032D9968FF8245DA53F88FE0A8783A08
+:1035000069E3DDD20FE1B70C477EE826E4F5711AD6
+:10351000C2251FE969BE8FA54B3BE6F939F69BBD75
+:10352000547FD07ABBA97C70C09CDF9A2EEDE70354
+:1035300043E26FFAA9EDFBC3708E3C21BAF5D73F89
+:10354000A38DF3D4539D713CAAA6CF0AB74E1F6E2C
+:1035500029DFDB80EF8F3AF17D6B12F1E5A59863EF
+:103560002ACF5F9E674F49FBCD0B79BE249C17E79E
+:10357000811782FF8558CA6743BE9278D5F33A3ED9
+:1035800043E7BFF2A34549B0DF7E94AEDBF93C7D53
+:1035900040973ADE1A6CA4EF64433F2E2F386985BA
+:1035A000DEEC492CB31AECDAEBF31CD8578B37E47A
+:1035B000398C74D6B0ADE010491CE2EC36AB072074
+:1035C000375803F7427E6FD8A6B6F805973BBC5430
+:1035D000FFACF3C0DBA8B768436C3EE46DBDFDE211
+:1035E000F52312CB0C700EDD665E879C16737ED8B9
+:1035F0006E73FE04CE80DEFF7CBBBCA0395F70C85A
+:103600009CFFE4835B67819CCB55FFBD2AF4893F17
+:103610004D3884F3F1D3175E8CC6FA2CFD4BD9419B
+:10362000E849A17122B46E0AF408FF5685E9E3B2B5
+:1036300078911EF8811E0F819D61A4930AE13F6875
+:103640004DB9BCFE19D132CB4B745559B7BCE064AF
+:103650004157BF57B6ACB343CE0B1DB7A7FD2F9C48
+:103660005E37EC6AC5A364D9557563C509F82DD6D4
+:10367000BE3B01F457FC4B85E58AE2E707BD0ABE75
+:10368000DFB663CE0D9CCE9AC8F8D0ED7D8BF72ABD
+:10369000C128CABB4649BA5DB85E617DBDA4D11CD4
+:1036A0004757B63624DEA6D95CBE78F7FEFF869F64
+:1036B000BEDCF118C7335C1E271878057A5BC5A7F6
+:1036C00082ED3D159BBF0D3397CB792DD4E7E1BF3C
+:1036D00096E3E1AE92553ACFB793C8D0F9F04B5785
+:1036E000516A06E1FDAAE68DAA949BBDC5EC9775CB
+:1036F000DA39CEB0CA21829104CFA128BBD745DFE9
+:103700002FAE8F6279615118C99FF99C8A708E43E0
+:10371000F4C4A0DDA977549683AAE2251EAA1E57F9
+:1037200002B0C556C1488AFC1332BF04DE2655D20A
+:103730008FD7003FD6CD98174D526FABB406F70325
+:103740002F9DE7C03673BD4A9AE7D138C859E6EFD6
+:10375000D5A29DEBD7ECFE36CCF8DD60DF657D525F
+:10376000D76B55C83304A77A4704CBB3C49823401A
+:1037700057AB14EFC30E15299DE3A0EF254E962FEE
+:10378000E66E94E747338C839083D70D66B967AEB6
+:10379000E2CD04BEC4BA70D6A7A9DC1FDE8BE564F7
+:1037A0009643484E6639AA7D8E9DE3129BF35A825A
+:1037B00090C79A1F48F1D00A327FE4F3E89E7096D2
+:1037C0007B9AA74AB9A7795D1F6EFF3140EB0B3991
+:1037D0005AE2B9F99E1C1EB79F2ADB893E520F2080
+:1037E000B93A137A02C1E541B92E4767C5FA4AB022
+:1037F000EEFAFC9B63DBA3E0C712E5F1DF4B6ED86A
+:10380000A29D87EDEBC203F0539C548A0E5A0CF62E
+:10381000A95B32E4F93172AC77AB568FFD1965962E
+:10382000A977FF80E0297BD0E26E48E95A07E1F5ED
+:103830006662FE27D785E783EE468E95F6A7637905
+:10384000929F470E171CBF73BBD6EFED1916539A04
+:103850001841F448FD9C2C94F6EDA8E1456C07A4B2
+:1038600035BAB9BB38903519F29C2AB317FDFE9AC8
+:103870006EE0E9A48BF152DE3DB94CD924E1F2723D
+:10388000BCDFC85F85B3FDF0A476DEE8EB4174349D
+:1038900082CF718D9FADD3E8665DCF7463A28BB983
+:1038A00090B7413773E4B9D84957DAFA12DDF07AA4
+:1038B000B7135D48BA11E26BB42F744B793B44DF08
+:1038C000EAD4B77BD0B7880E9EC8E86DA817420728
+:1038D000C21A18F18FFC2C25A362472AB40449565A
+:1038E000E147DC2CCE46C6D75DD6C04A82A7BF557D
+:1038F000AECB00ABA43B3A65FC11F95CDF8BF8D989
+:10390000E2FB170B2FD52F4E126CB74A27F926264C
+:103910008EDB09A47007AAB0E7508AF6C531B2FF62
+:1039200062A26FC4B3517F5E4B9CC6DC46C27F2A45
+:10393000587E40FBE87C6EEFB7C8F65E2BA503D33C
+:10394000E43E6A5F15C6F82BBE734026E864D25881
+:10395000339D24664A39414F1B33DDBADC90087E23
+:1039600050D23898CF9986F0A2AA5DD8A7CF487DCB
+:10397000A378F54D934700BE67E33DD8C2A7A7ECF7
+:1039800060FF4A49E39C1F7F083D655B387FDF98F5
+:10399000E97B0F783FADB817ECA20F25335FB12755
+:1039A000527B5FCBD473BFA3748A7FC7DB9023A6FF
+:1039B000CC50B9FE1421EDB9A2518E33D9FFB935DF
+:1039C00091FA9B3C5AE1F094B67057F232F855B434
+:1039D000F53DA6D17743B898FD9C13700DC84CCD2A
+:1039E000861F8224D46EE4E401995AFD31CA06C8C8
+:1039F0004303C7C9FDA7D7473FE8372D53EEB7CFDD
+:103A0000B47DA7E709AF5CBF6C4D585B5A34525B7D
+:103A10007010A5F3B2C69E039F99942A26AC07DEC8
+:103A20007FAA8A4D0C6F7B31F385A84C37F8828FC3
+:103A30001459A6FB6D8399EEDBC6B4B7DD49F9B620
+:103A40002D39D27EA7E9F30B5D82E582B63192EF84
+:103A5000B56F8964FE73CCD51A1527ED5DACDF9781
+:103A60006A24F1D7BA867BE1372E75DADB707E2CBB
+:103A70007C603AFBFB4B9B49BF475CFD5AB37E4FD2
+:103A80007A78586637FA7AA85E0E9A011D95AD5578
+:103A9000980E073678EC7D99CF292ECCAFCC194CF7
+:103AA00007FF2FF384735CF0657AFB3784F791B0DE
+:103AB0001F0B0EBA1A3AC8D70BE3163715B37E1A86
+:103AC00099ED63FE355025BC101DCFD4E86F12EC84
+:103AD000A0E04BD6D6BED897AF6568DFE35C994EC1
+:103AE000A6EB70BE6FD066736502BEB655E1169C3C
+:103AF000B793564AFAA67DE7C0BD80BBAC2202FC54
+:103B0000E0B8D67EFE0A6BD146CAF777086B541C24
+:103B1000E82B8FE93B90E5FB0CEBF7E92FC428C8B5
+:103B20000DA56BD749B834FA10D623E3E3699C4F4F
+:103B3000B7A4E4C3AEA0D353206B6C76E608035D54
+:103B4000CC50981E683E87609F9D9755928F72FA61
+:103B5000BE1FF432696C301D71D8856A25C7AB76FB
+:103B6000240A0FE2873A443BCB231D248F803FEA8F
+:103B70007C46E72744175E4742D77AEB7C656B3D6E
+:103B8000814678DE56EFE0F4A97A97B0124FD85EFE
+:103B90009FC8F967EBDD9CB6D467F1F7E7EA3D9C77
+:103BA000DF593F8AF32FD47B39BFBB7E22A7BFAB3F
+:103BB0002FE2EF841FE64B3ADFD1F9934E5F3A9F35
+:103BC0000AA5AB058466DC33A0F6CC0F753E887978
+:103BD00058F2BBF893BECEA94A913F11FC50B4CE27
+:103BE00001FF2854CF3EF322E1B9A3DCC9F1A11DA6
+:103BF00042F2C10EA783CF8D64BBD80DFB40C33208
+:103C00006FDB9D8673785EB922AC06BABDA9365CBF
+:103C1000580D747D735DAC293FBFEEFDD7FA50FFA0
+:103C20003F8BF12DC2FA1CBBE3D4A37FA4EF8FDF3F
+:103C3000713A03EB4E706C7908E3DE1EA1C1D12A04
+:103C4000E1BADDCEF2D2C008A94FE1CF6188732D71
+:103C50004E897DFB3704E7316D1D06DA5DB346C141
+:103C60002EB34A75ADA42A1F63BDE8FB9FB5F52AA4
+:103C7000A90B637C96346AFBD418FF4CF83CDE57E2
+:103C8000B05CA77885801FE9F82FEC419211C471D0
+:103C9000C51150681C8594ADF9B017AE79FD28E4C4
+:103CA00074A5EE10CBD53E8793E32884DF76D6D873
+:103CB0009F527790EB89D6FEA638C8C8E15E3BF8E4
+:103CC00005681BEB56927540609F8B2685EFF1943B
+:103CD00069DFCBD628A6F8E27B3355E68B8732AC7A
+:103CE0009C0ECA149A13A589CF299D5E897F703CCA
+:103CF0006359539E7D91812F9768DF4BB32CA67833
+:103D0000C74319322E6A109805A57767A5DA1732CE
+:103D1000DF7373DCBD5EBF242B7F75EA70F483E82C
+:103D2000A0AEF68F645AB9DDA10C9784C741E7595C
+:103D300014C7E9747B2EE872CCA7F8EF950C3FEB23
+:103D40005915CF3EFD2CFC7B157F0AE3F3A9629841
+:103D500066DFC80E8C9CCEF28FD7A98C84FC2DD741
+:103D60007FFCD37F89467C54CD4E6957A5B40D693D
+:103D7000F5EDE56C57ABF6D0FE88039F35FBCD5FC4
+:103D80007DF64FD1ADAC97F893B4F85B8EF7AADE11
+:103D90007982E3C0F4B8AFD07635CA37ACA7EA7100
+:103DA00001BA3FB6709F8DF74DCD1E85F5989A5D8F
+:103DB0001713C0E76AF6AD4AE82E2E27B45F3D5EC2
+:103DC00040B7BFD588B59FC37F4884C3F80FADFF08
+:103DD000766654AF53430562D5AE603B8855701C80
+:103DE000C7722D8EB32390C17EE19EE4ED9AF5C497
+:103DF000F049BFEDB0BA6310AF7C418889DDAD53A7
+:103E0000FC20797E9FA37D04BFF085ED2ACB91171E
+:103E1000B647F17EA8DE7EFF41C4DB556F56D88DD4
+:103E200057258E30DEAA77AAC261E00F35B00BC5E8
+:103E3000F70CE7D2A7A36A415F4B5A14EF16F8AD0F
+:103E40001DEE98DE0678DA35FA5A1AD63292D74540
+:103E500083FF14F89A41CE5CB2F77E8E13A47AE702
+:103E600059AEF96D24C7B3510F6F03CE331B0AD877
+:103E70004FBDA4654735CB05DB235D10694EDBCC18
+:103E8000F729BED1C6FB4693D3CEC04F82F6CFAA48
+:103E90002C0F034EECCBD35A3CABDECE3248B6B33C
+:103EA0006878FB0DF6E788AEFA4B5ADAA2D3A9FE82
+:103EB00027BBDFE7D43948EEE325CE23B938473FA7
+:103EC000D919C9F7ED3ED9F9EB092FD178E75AC6D0
+:103ED000F4520CFB6CE0201BD73FB741C601F32521
+:103EE00011D60F5A783E67B62729AC2703DF849F87
+:103EF000333B9F8FB6F03EF6FF7B71ABB3156BC8BB
+:103F00007D84EBB24780FE5BB5FB11ED9AFDE57F4A
+:103F1000A7FF6AED7B9B52A48D23EF3B083D0EC2A9
+:103F2000A5ED3BD5C9FB6E79949DEF2F2C18E6BE0D
+:103F3000711EF8E89B328E51F4773F04FD6FC13B50
+:103F4000F16C6F596E73F741FE8BC336F6132C2854
+:103F5000F01CF5A17E8C9DED4A22B17504ECAD6D8F
+:103F60002952BEA85C433B9350DC8FE8CD4FF8ACA0
+:103F70000C58848FF29307A5F2BA3E526EF1DAD94B
+:103F8000FF13E4FB92C7ECC28F7B2FFEE7A47E5D9C
+:103F9000992AFD0E8F607F515A1917CC8C87DD4E00
+:103FA000A39BCA69546EA09FCA4DC14CC84F67ED10
+:103FB000D21E8972E84D95F9B25E8346A7E807FDE7
+:103FC000B6A5B8CEB3BCBB2B4A40EFB0BC1825EDAC
+:103FD00021BF09DF146638AF6F1A24E9B841F3072F
+:103FE000FAB748F80017E4F825F6A64CC8B9FAB8AD
+:103FF0004BA29B78BCB3DA784B229AA4FF448BC7C0
+:10400000437D1EDF26D8BFD3FE6418CBCBA7FB1E93
+:104010007901E39F7E7230C711B4A50416EDE6F274
+:10402000708EE3AE782A2C08783F7B328AED589F59
+:10403000D9A41CF6595402CB6187A21E5C80FE3ABB
+:10404000368729E0A39F29C29E88F22DBD590EA86C
+:10405000A8AF633F4905B117C8AF944E84DCF7D9C8
+:1040600096C16C27FAEC0D952F29D0F735F8EE1391
+:104070004D0B7EC6F2BFF43F9E7EEA6F83BBF3AF6B
+:10408000546C36DBC3F4F5D7CBEF1824ED03770C73
+:10409000927AC9CA412EE97F8B6C793095E729F96C
+:1040A00003AD03EB7FB41F13606F3FD6B22741719E
+:1040B00002CFC1CC5F03EFDBA49E757ABB8DFD42BE
+:1040C000152F4679D9FE74E7157CEFB042957278CA
+:1040D0008545DEDBABD0EE99564467B27D8BF0CDE3
+:1040E0007A6DFB16551B478EFBD9D601D29F10D493
+:1040F000F22FE4F03DB84971E2E6692C5F6DC80526
+:104100005E2F6E8EE4F8791AC78BB8878A9FFD5CA4
+:10411000E2336611EB0774AE317FAED4F873D59DF0
+:1041200057C7E05E817847E5FB1217AD9E3EE0BFC2
+:10413000A1F87A4FE3634B5F7894F94125ED17C4FA
+:10414000592DD5FCCB4B9F52589E5CBAFAEA879802
+:10415000EFBE6D13B85F70B6E5FE68E37AECD5F894
+:1041600067577B0FD75F4AF565FB37A3199EAD36BE
+:104170000FE0095DC7EFDDFE29F55F6A5FD142F20E
+:1041800045EEE5F3BF288EDCF627F095EDE16C6790
+:10419000A3F5E77B46676C2D8B30FF33CF8433BFAD
+:1041A00039132BF7FD27749EFAED80E787F7B15D91
+:1041B000EDBDE902E7D0E280B95F1DAEFD1ADFAFC9
+:1041C0008AF7C4C04F5345EB81FE687D7EC4EDDFA6
+:1041D000B171FBD0F93C8E76230CFBF49948A69B79
+:1041E00033FDE4BA9C7976109F676DB192DE09DEEB
+:1041F00064E84B6762658A1B3EA0870A97A48733F1
+:10420000635AD81E7046D9C1699B4DB6ABA8D3FC82
+:10421000DA447F89A01FD026ECA98EB54720C7803D
+:10422000CF8FCCE73488FBCEA17673D029CEBFBE2A
+:1042300059F2DC8478053ECF7E1BF6E3B4F03D7383
+:104240009F264F566EBFDC4F8875AADCAEB03FEBA1
+:104250009276FE02EA5EBADD9FE872A95FF1226EF5
+:104260006B69E3B225A0FBA5B5EBE681EEF5792CF1
+:10427000D5EE5FB7292AC3D3164EFB27FBF2F174A4
+:10428000FCAA598A1E9F275CFAF9457B382CCB2D56
+:10429000E988B24DD45F65A3B296C749D1F55B39C1
+:1042A0003F1D4FB8CD02FB5E9B76DFB9A7F9EB70DF
+:1042B000F6044F5296E44F6D29F29E6FFB5BF2BEFF
+:1042C000F6C56F0A62E2FE813CC891FA7A7F047FEC
+:1042D000166810728FC6E796C2AE4E70666E30FBDF
+:1042E00073B2369BF343B69BF3D93BCDF9DCBDE605
+:1042F000BCE75573DE85717B77E109FA36E203A1ED
+:104300006F2385BEEDCE94FA36F2D0B79142DFC668
+:1043100077E8DBC843DF461EFA36F2D0B79142DFBA
+:10432000C6F7391A9E2A357B29D681E3D4F684EB69
+:10433000F100BC5F2ECC49603E2AAC521FBDB024B8
+:104340009BE5C74E3BD35407DB99F438A7B7A27C53
+:10435000E3B27AC37F7B6475DF146EC7F6E79ADF3A
+:1043600049FB73657EB813F68ED6559FAC86D8137D
+:1043700088F24D44FD0BB6F6ADC06F55DD2BEC6FEA
+:104380006F5DE17EE70772FDD8EEA2C72D15E3DC75
+:1043900003DF267D49C66F7B1C463B6AA85F48AC9D
+:1043A00035E4213F359BF3A17E20F035AF695F35C1
+:1043B000311D3C6E6BEF0BBE7FE24907DFF33AA184
+:1043C000D9EDC46C17CB63BA3CDF298FDDA36CC277
+:1043D000F9BD242B8EDB771CCA30DDD30B4D4B2F60
+:1043E000E5B3BCDA995FAB58304ED98C15FB59AFA9
+:1043F0004E8CE673E9160DB64190FF0D700F0E441A
+:1044000098E868E8B6B810BF653F53FD61BB5343F9
+:10441000FC96434CE5D3D71698EFB5175D6D2A1F70
+:1044200068EF8C877348FF96069F4BD6B9E8CCE7B8
+:10443000F986D64B563C7F84BF56BC25E5D3329ACD
+:1044400087B7407B9F231FFE39EF14E0AFBCC51632
+:104450008BF3BE543B87449DF95C2EB70ABF2BAE4D
+:104460008BEECA5DC21B4BEDBFB43625331DDD712B
+:10447000345925142D19722437087DE58D2746827D
+:10448000AEAAD48DC92E2ABF55096CC545ECD3718F
+:104490003B12AEA4F2FFB4F81EC9A2754AB605EFEE
+:1044A0009D0F3EBA234DE0BD91136B9F8FE6B83C44
+:1044B0008DFE926DAE08D0C1C62695F514D8CDD428
+:1044C000B82E3AD9D8141F01BDA67C8CE297727120
+:1044D000B449DF0BC547A19AFD8E9BE67BF1902A7C
+:1044E000EF406AF35CEE92F545BA6CAFDFB3D7E705
+:1044F0007B52D3472B36BE96790B7D3F3B787F2E80
+:10450000AE8457D6EFE6792FB56CDFDA97D27B1DF4
+:10451000BE5D98D7F2B7C6455F49E37CB95DC687F3
+:10452000FFB5F989C7FCC44FEF6C7AC20EFB418519
+:104530003560871E5CFEE4463BE218AEDBB691BFF9
+:104540002FDA56CCF600FDBEDAA77A7CB3868FF25E
+:10455000B1CA0617CDB3FF60C94FCA23641C4BA173
+:104560003AFA35DC13B8B84DC9C3BC6614EDB0E3F4
+:104570001EFF3B1ADF09DD371D87A717F686BDAB87
+:1045800045F120DFD33E9989CB72440FD32FB9393F
+:104590009D716908EBD51F0AD2BE708E6487E8D77B
+:1045A000875569CF433C12AD73B93DD86B3AE4856A
+:1045B00097E5FB0F55740E8DCA87DE2EC4559416F1
+:1045C0008D564D745E333ED2B40F660BC3BEA2FE51
+:1045D00066897EA6FC8C4969A6FA37CE181AE2676E
+:1045E000CEEF2A67FE7595E95D97AADBFD6E85E340
+:1045F0007BC69ABF537A3BD3D90DA6F655629AE98A
+:104600005D97259BDF653C1395D9A18F956BF7418D
+:1046100066FBDAB4EFADFC9D2662DAAF03D33C7FD4
+:1046200094E7A58DFD08BA1D7D36FE9FD6DD79196C
+:10463000D1198F89F85BD83B7C6679E408EBA942F5
+:10464000AE4395668FAACA92F6A82AFF113BE29B59
+:1046500009FFD62442497593C2F646AAEF488A93C9
+:10466000F9DBF17DA7F95E07FABB84F2436A31F604
+:1046700057687935CD1BE74235EC47B083E9FD6BD0
+:10468000FDEAF4197ACF3EB41FDF6037EFE78A6D99
+:104690003B0EF623BC4C2F8ACD437C4965CB545B43
+:1046A00071F6E574A6F3FD8BE516B67F751C7E8565
+:1046B000E9ACA3DCEA91F1DDFF181FD55E696F0D4F
+:1046C000A5BF45341FF89917ED543C0145D6035E4C
+:1046D000FA812E43F092D40DBE743C75E22DA47C79
+:1046E00031FE331CF1114A007CF232BCE878D4FA76
+:1046F0005FE4132C67123C018627A43F312A74FF24
+:10470000DDC2EF20746C50844BF96E3C4CBB24ED41
+:104710003603D3E4BCDB77291EC8EBB32E59F97BF3
+:1047200027BD14C938F51993CCFBB3937E8AE47E78
+:1047300099792981DBFD6FD3D177D18FEE9F098DD8
+:10474000FFD6EF5D2D1AACDD4B1A21467CFB4FC422
+:10475000AFEB72404FE749E779E3D2F0EF4CEDF66B
+:104760001C5E1E95CAF1DA3ECD8EA8F3639FD64E2D
+:104770001FB798CADD05A0EFFE09B017AF6E4C4B0E
+:1047800036BE17E35B65633B6FF28A784E8BC35D81
+:104790000938478A57C8774D8EDFD52701FE88E351
+:1047A000AB6CBD2651D7C77F3A3C59E4205FC8E9BE
+:1047B000897561B38D76783D6D1A2CED35FA397EA9
+:1047C000CE72387A36F6DFAA5DD108055ABAEAFD0C
+:1047D000912E3ACF57597C8F0F667FEF463ECF859B
+:1047E0006B632EEC70BA3C51B1AAB00FCEFDCAFF7C
+:1047F00079E5319CFBBE15B604C8A39F7DA00A8451
+:10480000CED079C672C4A7E192AE3FDD12C9F710CF
+:104810003F558417FEA625EAFE5C97E95CDD3B0B5D
+:10482000E3FFDE41E38EC0B881AD8918D7E3CFC482
+:10483000B8BE151931DDD957F4B466BD94F3B6EAA4
+:10484000F664CDEE0CF91E79C8F7706241BE471EC2
+:10485000F23D52C8F7F8BE4DF32F0C6C68CF837E43
+:10486000EA1F2BB26AF9BC7566417EBF4589F080AC
+:10487000FFDCA278FA70BCC166F9DEC4F29075D58F
+:10488000D36BDA490633D0ED0F2E3984316E6E8C3E
+:104890008835E5C739FA9AEA17BA524CE5D7250E9A
+:1048A00036955FEFCE33E57F9875A5A9FE64CF18E6
+:1048B00053FE47A3AE37D59FEA9D6ACA4F9F38C7BC
+:1048C000547F6651B1A9FCC6D94B4CE5737CCB4CE7
+:1048D000F979E53F35D5BFA97685A9DC2B5C569CD7
+:1048E000777BA17711DE5F86DE45E92D6F65388D18
+:1048F000EB3A7A9CA5DB77794E697250BFA1DE3620
+:10490000D025EED7800E0768F767BEC0B9D21B7EF0
+:10491000C9A022F5DE237D4137A1F542CB47471ED2
+:10492000B8E8A6352C7A2A7AA695F8C4E82B0E1496
+:10493000A4517EF5538533ADC45F465F7DE0F954E5
+:10494000CA373DB54A960F3B7011E5514FDF20F352
+:10495000D3058B1A8F0CF97A869FE631FA07A96B7B
+:104960003DD26ED26DBC69A73D88F080784DE001E4
+:104970006990E813E901A24FA4AF127D96A50B71CF
+:1049800090E813E921D23FF1FDF7A47F223D4CFAD4
+:1049900027D2B749FF447A84F44FA4EFD5CFE6F489
+:1049A000837A1FB7FB437D39A747EB6BF9FBC7F54C
+:1049B000759CFEB9DECFDF5D43743B4390ED31BAA9
+:1049C000FFAB1A7E47D8ED76DBCE1AFDC28A579E22
+:1049D000A7BABFB2A156B446629FB65A634F39BA5E
+:1049E000FC903DF35BAB386590BF5E0FF7260DE1A1
+:1049F000F1FBBB986F6BDF8F89E903F2699D0A5267
+:104A00007D29289F995FBA2A86F8C70FBEA9B5816C
+:104A10005E3EB4747F7FFB0B8D4EDA877833878CD4
+:104A2000E8F2BBEB7EEFCEF81A835F1EFE6C3D8E84
+:104A300047F7C7F39F213E47F793EBF141D76AEF62
+:104A400023E97E703DFE47EFB7F09260BE77CD1A46
+:104A50002BCB2D515611C4387A9CCF358E963CC441
+:104A60003B5C53E9E438B73EF41DEF23523D2FDEA3
+:104A700099DBFC25D5CFEDF2BBF7D1E641E53C8FC4
+:104A8000C24B3EB6D75EA3C51DA0BD4396F33B7592
+:104A9000881183FC4129DBE11E55A87D7E571C004F
+:104AA000EA47CAFA41F497FE158D17DDB58F06C4A3
+:104AB000B5E4216E6C40B593E3C6368C09F2BDB9FE
+:104AC000E9B1D7DED3AA224E38E6C7D8474FA7FAB6
+:104AD0006602CFEFEE730FF0507E5A5C5A6FA4530C
+:104AE00043DEB5EB667DE6625D757CE978D7D74B32
+:104AF000C7B7219E8AF1FC5DEB17BA6EA1EBA5AF9B
+:104B000053E1A52EFC037F97AF4FD7FAC13EFBFFC1
+:104B1000CBFA0CB7B6F07DCCB04A8707707DD77A58
+:104B2000DDDC2E26E03E78F125F741A44BD27C5FF8
+:104B3000807F968A31135CC0914BCD819D27B4DE76
+:104B4000F2EF59EFE1907A07E20AD67C9D7679BDC3
+:104B5000DD21F51A620BD67E2DED4C37E27C3DE46B
+:104B6000B6B11FEDCD703D1EC3EBCCA3751CA7F1F4
+:104B7000A343A296CF0F12D7FC58DFF1DA528FCBA6
+:104B80005ECC72EE78A7596E9CF04D5123C69DD035
+:104B90002B448ED6FCE13768FD5E279AB8DFD07BC8
+:104BA000F23768F269E83DF9E78668F2658A4801FC
+:104BB0009F1A2F3C122EEDBD83F12ED96F92462FF6
+:104BC000696E558C063D089F15CCF155BC77908BCE
+:104BD00071FD9CBF5E0438FDA108723F938991224C
+:104BE000FF23216CF29D03793FB35AF5FD27E42C96
+:104BF000FD5EE6C270DFABD877AF444E998FF728E1
+:104C0000C6158C4B47BB03E3DD2C9F1C70A4B1BCC5
+:104C1000847D658BEBDA7F6FD0F9926E95F7069104
+:104C2000E2DE603A6D96D7E9FC41FE86AC1502EDF6
+:104C300026B8CD71387AFB1FBAC60A6B41CFFCFD8E
+:104C400087B97BFAC3AEF366ECA0F1B083BF197BE2
+:104C5000C578CCF7CDD83E169986D939CD7931BDF6
+:104C60003B794EA7E7AEF126086B7CCF78D6F11AD8
+:104C70008A4F1DCFFF025E2F7487D72F060B29376F
+:104C8000474A3EA2E3B72AACF31E671F635C44A504
+:104C900043E2E933808C7BB87557F13C3EA917FDA0
+:104CA00081EF4575A3B83CD40E2536C7705E7FC72B
+:104CB000ECCC83EF4627127CD7397CEA50C2CBD9A3
+:104CC000FC60264930E2930D0D7CEFFADCB3AA07B5
+:104CD000F27FA5EA5EEB014F7953653FA0F8E695B8
+:104CE00064F809C5E6EEE3A32B1D12AFBAFEB3329A
+:104CF000AD88F7A7701524CAF7D5E43D725D1EE8AC
+:104D00001F26E38BF5FBCC3DC9072323241FEB1F94
+:104D100026F9AEBE9ED48EF349D4CF48E25349F76C
+:104D200045B03EB0DBE54D1A0A7FCA786192A7759F
+:104D3000BDBFA3977C3FF05A91F9D068CA8F3F64FA
+:104D400013012AEF182F4CF164856F94F2BB16FA09
+:104D5000FD98B044D2AF0CFC20DC1D617A6F343278
+:104D60002BCE948FF2F433D58F19956A2A8FF50ED6
+:104D70003195C74FCC37E57B175D65AADF67F658DD
+:104D800053BEAFEF0653FDA4F269A6BCCE9792E4E2
+:104D90002731A076AEA9FDC0BA1253FD147F85F964
+:104DA000FD54BFF74856029E77947F696B9687BC87
+:104DB000AF6A1196915DEF90FC3A5ADE0799E85C74
+:104DC000C4EF916434FDCC0C8FFA8D8A732629468A
+:104DD000E1F724AE739BF96061A2393FDE95F72AB3
+:104DE000966E9C2B34FE28A8809E926AADA6EFF3A7
+:104DF000866A7C3457E4B29EFE5DEBEF1B625AFF7D
+:104E0000507C5D4E0FCFE705DDD29E6F9C17ECF90D
+:104E100046BCC09E6FCCC39E6FAC0F7BBEB11CF670
+:104E20007C6379C121331D8C3862A6832B8E9AE96D
+:104E300040A7CFD0F5BAB2D54C1FC2A7F8947FB027
+:104E40005E577F6AA69FD0F521098BD76F825311D9
+:104E50008FA4FCFBEBB52E64BD3AD787F00DF9F6B5
+:104E6000DAE050BE275B78481578B7E4516D9ED7DD
+:104E70000DADE527C3B65B7DBFE67DAED155435F83
+:104E800049571D879E0F071F7D34A4FFD7FBF902EA
+:104E9000A83F3BFE62B21DF4D12EDF456B031FEE2F
+:104EA000DD15B7497ABABC77F23395E3188E599A73
+:104EB00014F0EB8218DF36F0CB9BB36B15F8671359
+:104EC00045D18E4588CBF98FB064E4170C94F77701
+:104ED00045762BDF7FD0F9E282241917D83254F3BC
+:104EE000F37A64DCCEF343A5DD24CAE3E238E3E2DF
+:104EF0006C79BF83D499E40539C0C7E1F041C0475C
+:104F0000B385DF696CB5B9396EC4FF862AE0F783D3
+:104F10001C0BF9728026DF357CE47000FE41EB85C6
+:104F2000E99C1D1C7098E25B876E7399F2392D899C
+:104F3000A6FAC376BB4DE579C12C5379C1218F29DF
+:104F40003FE2C82853FD2B8E7A4DF92B5B279AEA56
+:104F50005FFD6991299F24DA1F067E072A528F3E42
+:104F6000333455E2C92D387E6FC19DB1F2DEA7A65C
+:104F70005FEB72BA1EF7ECD3E83954DE1F68F771A5
+:104F80001C75435FE1E17B180E4D9F12663DC0A783
+:104F9000C52D77DEA3F09BE396F578E54E7D41D3F2
+:104FA0000F7439DD10AFEC35C62B2F08EBFE3DE05A
+:104FB000FFD2D63D14FE817639DF869FDAF9DE888E
+:104FC0000E57283C33B538DA2D8EEEEFF5D8B225E2
+:104FD0009D256514FD1DF4FE98CDD3CA6FDD5F36A7
+:104FE0009EA7D54FF4D5F00BBB67A5FBBBC75B30C5
+:104FF0004CCE67BEC572F3D46C8ECF32BD83DF3B1F
+:105000005BEAFD51B94AB7F35B1023E3A7448CDD9B
+:105010000DFAED793C89CF44BB68E4FB475A9CFF0D
+:105020004D6B5BEE194445F3ED4DDA7B60011BE8F7
+:1050300061D25892C3F284D8B66557B393E4A2C73D
+:10504000EAAC6C3FE9BFDD358B24B8CEFB1B0349CE
+:10505000EF017D40B681BEB42147E571AEC19E1B14
+:1050600081FDF64D679C3DFB0584D0CE0BA94F75A5
+:10507000436F4C87FA3CFEAFE3ED43F1A4EBAD4246
+:105080008B334CD7E0D2F1D76977D0F0A7DF7F70B0
+:105090002FB3156D72F23D8A8988DBD2D7AF2547D1
+:1050A000D265AD860FD4033FEAA95EA19A1D03FB2A
+:1050B000728770C7B8BAA1433DFDBFC28B8EFF9EF9
+:1050C000EE57F5C41F42F9C277DDB7EA894EFFD922
+:1050D0007B57063E21E368B47509A45BD83F7D6722
+:1050E00094793F6FCC96768D71DABEA2F3DD996725
+:1050F000E61702F6F18655AAC62FE4395E9C52C423
+:10510000EF118B3A17CB33E51A2FD6CFD7850FC8BF
+:10511000F7E0AEF516255C45F992669BD848A015D8
+:10512000FBBB8FF366BF931B71FE9E44C0CD263739
+:105130001AB7B44909EC4FB9FCBDECC54EF97E5C19
+:10514000E8BBD98B35FD172F2A60DF86FA65EECFD5
+:10515000D6CE6B8FF07C2BE167BDA50B7E8DDE027A
+:10516000F21D31E8C3AAB4F3709C968E3737FC2445
+:10517000F15D79C26F4416CEF3466BB771749DF83A
+:10518000D5FD2A9D7EC2C31CAF1F1A1770D6FF4AD9
+:1051900074777E1ADD7FD3D33EE8F4DF7C875FA887
+:1051A000C369891E053E04FFBFDBE857F9F3488257
+:1051B00090FD2731F08FB46AFD898DB9DDDD4FF4A4
+:1051C000ADD8C5F110AB2CBEFF405CF219EA1FEF61
+:1051D000B0DEE53C9080FBF89334BBD3E5F3D6E436
+:1051E000B0D1F27E40875FE5F5EE9828EF73131F8C
+:1051F00015D877BA1F7FAA08F642AAFB497C6B46EE
+:1052000031FE753F49717014C339B361B10D4F4818
+:10521000B63E7C7B6184BBCB7FD23A40C6E7F4E4E8
+:1052200047997EC9C3FDCDB87415F7732C3B45CAA9
+:105230006B8DF72C039D0DD9266C9867ABADFBDF0A
+:1052400019989223F7D152F8D27B1BE27E5628ACF4
+:10525000072C57841E07C47C5ECF5F6CD2F2853268
+:105260007FCB2A996FD5DEC5DAAAD93B304FA498F7
+:105270000FF4F0ED9A3D04F3408A79E03BF81AF21E
+:10528000E06BC883AF210FBE86147C0DDF4B445109
+:10529000729E2AFD3DE30DFB03FE9EF106B909FE59
+:1052A0001E631EFE1E637DF87B8CE5F0F718CBE1D4
+:1052B000EF31E6E1EF31D687BFC79887BFC7581FE8
+:1052C000FE1E631EFE1E637DF87B8CE5F0F718CB97
+:1052D000E1EF31E6E1EF31D687BFC7587E739D62BB
+:1052E000F207DDACBD3B50BA3E8EE9A339B52829A3
+:1052F00087D6F73F23FFE7C7B654ACF3DE25FC6E35
+:1053000060558447AE73D344B9EE1621D7B97D0EEC
+:10531000AFF3ED76992F94F1C2A1F403BFCAF874EC
+:10532000E957410ABF0A52F85590C2AF32DE2AFD52
+:105330002A48E157C177F85590C2AF82147E15A470
+:10534000F0AB20855F0529FC2A6807BF0A52F85593
+:10535000F01D7E15A4F0ABE0FB318203FE151D2E7F
+:10536000C8F9E9263D94E8D0A487BA4C79C8F9C6B3
+:10537000FA90F38DE590F38DE590F38D79C8F9C639
+:10538000FA90F38DF91BF188716F29EF1BDB41DE79
+:1053900037E6739AFCAFC1863579C3F95791B646A3
+:1053A000298F292E92EB729E9A05FF586BB8921C9A
+:1053B000EB213976C56F678DBF92F889166F972BF1
+:1053C000DA2D586FF67BD3BAF98282E38373FE3B02
+:1053D00091CB757F2BFFD1BAE7ED14AC376CCB9036
+:1053E00070E9ED3DC2A522D5EB77E5BBAF173ABE1C
+:1053F0005E8FF9A5010E5228F310079177BB331F7A
+:10540000F1ED5B2D8A8C0B5D29E37243E9AA49E338
+:105410004B5B2D3B0E4450BBF662C5837B07995610
+:1054200071C8960F3CD5E6439EA8CB89D5E2836B25
+:10543000AF423C900EB76E7F243EC1F7DD46B70BFE
+:105440007B198D73CD17C28EDF5B986497F204DAF7
+:1054500041DF1CEA57BC9B0CF4BD32479E7B3EFFEC
+:10546000B2ABCAE8FBD0EDB557E11EDDA408D9EE1A
+:10547000378F47331EA7342A9BF0FEC9E8EDC28B55
+:10548000FBB1BFD4E01EBADD652FE3715D7CFF4E3A
+:10549000EFB7784332DF172C16ADE313D927A1F00D
+:1054A000FBE63ADE687EAF627EC4E20FC18EFC2F5F
+:1054B000DFC32171F1FBDCC3B966786C21E2DBC488
+:1054C0005EF90EE4E4E1C5AB7A135CBE807C07F2C2
+:1054D0009A2F6A5FE3FC66F90E2493CF48868FCF3C
+:1054E000C3417E85DFFF98E2DF68E9E5C6BDE015D0
+:1054F000B604D4DF2E3C500B060979AF559F57B642
+:1055000038620957402FE2957803FD11E798017A38
+:10551000C9F3D8F87D90A956970DFC4697738A5D1C
+:1055200072EC4275740CDFF70B91132E36F6E6B869
+:105530008D7F3D8EA483EF932FDF15CE72858FF87C
+:1055400007F8E6B93C197759B9ECC39196D4AE384F
+:1055500092D32981AD78DFF374EA8EE8510ACB113A
+:1055600087C05FDB1A9FE77B82C5AB5EE3FB10174A
+:105570001B1F8896F7AAA47FA54CC39B6E6F5AA8E1
+:10558000AD4F99163F74BC5EBECF4BE730BFF7718D
+:10559000B1D1C67246A8BC2884EB0F88732B6FB4B8
+:1055A000F1DDD3C56B8B57278AEE7E77C52BE3CF12
+:1055B000B5719734DA384EA85C7B472BF477589650
+:1055C0006A72E8D26DE6EF277242E44FFDFD44AD0A
+:1055D0004EF15BAFCC6439A8D6C671EEF35748B92B
+:1055E00048EC1001DC6798BF629C05EF58CCDFE502
+:1055F000F528DDD0D13B9A7C34098312DEA75E8A80
+:1056000060BE32ED523FCECFBA94C8E98D97B2E476
+:1056100077AC1DD14B6BA1BC5FFFBE2617CD441CE0
+:105620006501E4B23E4CD71D44D7182257E35743D7
+:10563000BCCA2B30C34FB2F956214E73D246C1F7C4
+:105640009126437EA282D990A70AB02F520AF93E32
+:10565000C64485EFB74C1EBE4CDB07B42F04F311D4
+:105660007EF7C3377E6A00F137B37D3B2C58777DD8
+:105670003FF8FC6DFC0EE664BF62C77B813E4DCFF8
+:10568000D6E93D745F2C88D4EC634E69FFEAB48F91
+:1056900001587E9C27F246C4B32E802DB39FB6B02E
+:1056A00084AAA86C599E9C1B79632394AC7FD36E0B
+:1056B00032DF6291F79F48FEE3787571A4B00FE581
+:1056C0008BD72AF98897D7E1FA7AD8D849C37A775D
+:1056D000D14149E7FECCEE03BD60F95D1926FF4CD0
+:1056E000685A4AF8C63E5A10D3FA63FCD2D0845C9A
+:1056F000E11D9F8877C8F5F98A20E202E76AF9DBA5
+:105700009EBDF28F6B9C8C27CE8FCDED7723E23F31
+:10571000FE65FE385FB11A7F37AA4DF17973E53D1A
+:10572000C80958DFC8EC767EC76066A64B9E2F215D
+:105730007696DB72DDF25D84107B4B69B63C6F843C
+:10574000D59D3C8FFD3A6EB657EAF33E6E33DF339C
+:10575000D5D3EA5C6937F8BFBA27F1A045DEFB7FF5
+:10576000C412D8F122D16BA0B76F01E6FB08E2BDED
+:10577000197E1FCF4F7F47A3934F69EF65E8F474FD
+:10578000ACEE22DF972871DADDAA819ECAD6287C8A
+:105790001FB1A44EDE27F6AD51E4BDFC1EEC578FC1
+:1057A000CFF99ADF517AFC1711B250C3EF7CFB910D
+:1057B000D71C295DF8FD53DDAF6C927F0633106F67
+:1057C0003FB7369CDF41FE7A58D18F017F64B687A0
+:1057D000D76912F134D49F1AE3FB29BE97882307B7
+:1057E000616F5CF0F3B7F87DE19ABD29FCEE61F1E1
+:1057F000EEBCD57847E5EB61BE3B72897E8B9D2E72
+:105800003BE490EAC6583E9717F4D1EEA98B76F6A2
+:10581000E7E9EBF360AE94078A3C729C0B9A3E4535
+:1058200008B34D35D593E77FE83ED4EDA2A1F695B8
+:10583000D0F72ABECB9E027B89DD6057D5ED31B60D
+:10584000ACE373709ECFB777FFBB8DAFEB76474D60
+:105850009F5DD8A9CF664FE803B97F9DE2821DBD49
+:10586000CCE9BE11F1F565876C88F01493E2DCF2A7
+:10587000DD92BBE4BB2525B7E6313F9B8F35C9C719
+:10588000BD8751BC8FCB0294C6F7BCDFE7AD7B650B
+:10589000C01ED053D0CBF7E0CB5C5E7B9C412E2A60
+:1058A0006D524CEF18E8F91773A51D723EA919C087
+:1058B000DF4DB7A6D8F186D07C128F1037F8BA46E4
+:1058C000277A3BAAC771259352C541F9AE14C19DF1
+:1058D00022C733FE4E514993F93D06AACF72DDFE31
+:1058E000DC28EEAFD845F34E41EA6238090F8CA7A9
+:1058F000F67BA83F378FC3EB511A0CD86037988FCF
+:105900007816CACF75056C18A7A451BE8FE25B2B21
+:10591000C7F1AD89B5E7402EB0BAEC038CF260A3B5
+:105920007CCF78BEF6FB11042FCBCB658427DCF34C
+:10593000D2EF7D86E2AB5883BFAC29D62C5F36AD63
+:10594000B3617DE6F4F05EC3971A1D97348EE1FBD8
+:10595000F565562FDF97F069F8FEEBB2F0BBE12753
+:1059600099D3FC902D05798D2F7D093CF7069E82F9
+:1059700019FC3ED2B2708E679EE36AE2F976E2FBD2
+:1059800001C20FE4155711E39BE8C48F38C0B2661B
+:10599000F3FA76C11325DF656F2EE6FDB7C8EAB3CB
+:1059A000BB8C70ACDF9F81FB5B7368DFE3FD27E19D
+:1059B000F2F17DCC530FDCC8BFFB063881E7288F9E
+:1059C0007B02DE3B22BA61BAD6E9674181DCCFFABD
+:1059D0007851C3ACD20E3FECBBF6A9F720E4F30636
+:1059E0005A6FD8FF7BDAA7765C00A471ED65F2DD13
+:1059F000BAD07DABEF577D9FEAFB56DFCF8FD98AB8
+:105A000082894A17DFA1F3BDF6B96EF03449837776
+:105A1000AEB6AE84D75785C1AE376298DCDFF3539C
+:105A2000CDFB1FFDA1DF54BD7C6C3003F73DF5FAC3
+:105A3000FAB8F3E3643BEC03D05BEA304B67FDE577
+:105A40005CDF62E21FA59DFC63FBAA04F08F1D0AC8
+:105A5000FBE196DF23E5BEE5CFC87BE16796BFF8A3
+:105A6000F62CAA77FAC18D0B8CF72FCA82925F2C85
+:105A700024790BFC6391260F6CCCF4E50D33ECE735
+:105A8000B2FB9FC9C4FE98DB92770A6FA8D1BCF91C
+:105A9000BDA33F3FF3D28757B9BBCE5D7D1E256BBB
+:105AA000DEB5153B8D7893F47E7756079F5BA5385E
+:105AB000B7E853696331F36191487A8FD2B5EEA1AB
+:105AC000F450DCA8B09C575A3732A0FE2FF2EBD22C
+:105AD000B553F98D287DBDF4775FF47357877FA6A2
+:105AE000B64E73357A9E3D4CEEC3B9E529F645BCFA
+:105AF000FF53ECF8BDCD395AF99C32F3F7CEF5726D
+:105B000075F2FBD5D827B89F84F5EA586B93F6CB8E
+:105B1000ED97AD5732E4021D8EC59A9D72A1666F56
+:105B20005CA4C9CBB45E8B8DEBB5F871B95EA5CF23
+:105B3000BEF517BC5346F3D3DEA393EF0A94B4EC3F
+:105B4000E0759BB3669D2D85EAFD64588A29FEA801
+:105B5000B436CF053BFDDC351B6DE0073F1926F160
+:105B6000164AF7F3B5F8621DAF388F14833F47AF7D
+:105B70000F3EB883C6B9755978B4F177ED021A3D76
+:105B800097D6C6C661BCD2DAE27BA17FE9E740E8DE
+:105B9000FE3B112EF74509F587FD79628C87EF559D
+:105BA000CFD77E372FB4FE431ADDFDDA26DFBF4C98
+:105BB0008A6C7992E33B6A223CE013E9E9AD018CFF
+:105BC0000B7A06DC768B7C2F33BDB2F573C041A215
+:105BD0003CC7F520C57B5B10ED1328BFC922EF79C8
+:105BE000A5AA32DDA7E107A637948B5EADFC1E5F48
+:105BF000E7BB5121F46A179BD7E0DD1F7B2FC1EF74
+:105C0000A6E9F4A9F7A3D3A74EBF3DCD6FD7F79C64
+:105C1000DF8914CDCE92E54976D0B80BEE1BC4BF18
+:105C20006BF15DF3B46BEF3576CE374CFEDEC765B6
+:105C3000F34D97FA52CFF36D2E4CE866BEA1F3D424
+:105C4000F7891E43DFE94F6992FE94130A9D63D4DE
+:105C5000EEC4B2708EABD3E7A5DBF5BFEFBD878F87
+:105C600086C569F6AAD628C897F3B5DF51114199C0
+:105C7000C7F7A986EFFAF9AFBF5FA7F3E993B5DAE3
+:105C8000F9285AEFC17E1675697C0FF558D389281B
+:105C9000BC1373628C844F6F77AB4DDE73165176F5
+:105CA00037DECFBBE9D63CFEBD94858D7D589FBDC8
+:105CB000A92E8DF9C24D7E581745A71EB048E38323
+:105CC00091B716AFBE02F5D7A7F0EFC22D747A4E8A
+:105CD000ADE7F6433D9013239BA7DA53591E96FA7E
+:105CE00082EE17BB5511457C4F0D7C12FBCBB23FAA
+:105CF0001DE7CFE2F5523F9864116BE03F1DD8508D
+:105D000034A12FF8C4C38AFC3D9A0DE6F7BC860E79
+:105D10002AFA027C26F45DBC5B6D2D5EE8A782E466
+:105D20000ED8D1163A8B589EBF45E393C79ADBF83D
+:105D3000BD7E1DAF8FE0BF78A72AC47E146A271AE4
+:105D4000A8D907FF1FAF8F7B3D0080000000000037
+:105D50001F8B08000000000000FFB57C0B5C546541
+:105D6000DAF87BCE992BCCC080C84512878B84850E
+:105D700034C080D7DA518150BBA0BBB9BA218E653F
+:105D8000CA650650DB5D77D7FE8CA1A6667DFA4515
+:105D9000A665ED80976AC376483428A8C90B99593F
+:105DA0007F62376A2FB9635BE62D40BAFCEDBF6DA9
+:105DB0007DCFF3BCE7301751DBFDBE6FFCF97B797B
+:105DC000DFF35E9FFBF3BCCF3963348C751B186324
+:105DD0002A8B8E413968488964998C8D09695F6185
+:105DE0004C89C3F625DB45C64640FB7C93C8621947
+:105DF0002BD731FA7D8FBF1F31761F3C37C3F3425B
+:105E0000A934D607FDD737CCA072C9D6C26DAEF182
+:105E10008C250925B1936360C0E36AB6078A25CE55
+:105E20001977302BCCD3A48DD225C373B52B29C7BA
+:105E3000E09F6F49E343490CC69D69D4CF77437B0C
+:105E400081694E41148C5FBA332A5B32FBFB5D6F74
+:105E500011181BC958A573461C4B61CCF1DDE167D5
+:105E60004CA9B01F98D304F37FE50977BBA08BA39F
+:105E7000AE2D4982233CAAB3A758A07F95D8316F95
+:105E800012CC734E70EF4DA0FEE63853C0FAA1E578
+:105E9000E93AC6CCE98C39FFCF8734CFE7E2893BBA
+:105EA00016C07887737F04CE53F5F81FF201326C69
+:105EB0009D68CFB2E4E1BC8D7B4D121C747B6356B0
+:105EC000099CE3BEC7C746DA332F9FF7B668B6A86A
+:105ED00004DACBDB18C157695FE88ED420DCED5EB5
+:105EE000A6316169629A6828CF486C9507CADB526F
+:105EF000D8A2B9067FBB0DE100EB9E89DC9254026B
+:105F0000ED157B9F48324379D6C8EBA57B7F7A9C01
+:105F10004540FFDD5A0DE2D5AE621A0B8CBBD7258A
+:105F2000D8DC50B2F268C61210A36E7D9991B159B7
+:105F300096709AAF627B0E63B9FE7DC1736A3FAB08
+:105F400062C5B88F31F503D9CBA1FC8BCA7B1FE2A8
+:105F5000F32FB57A8B2B19F16226BCFC658B548428
+:105F6000EDAEFB053656C0FA7E631AAC5F16C96A01
+:105F7000717CA1F4579B04CF571C10B2B5307B78CD
+:105F800066B7E61E039116D159B589D3D98A7675BD
+:105F90005122E07F458B402D0E9557331CBE2A2F92
+:105FA0004D66E680FD56B6B668CCB08EA319CE0914
+:105FB000FD1D9E539AA5785EB685B17CC027FE89EB
+:105FC000F86B3EA5B937003FD5AD1C2ECE56DEBED0
+:105FD0003803903B99B66213D2A0DE2650BD3E6BCB
+:105FE000C2FC35AAC07AFEFC3569589A084E4C3579
+:105FF000905402F0DC94D1A341FC3BD7CAF3425D3C
+:106000001DB05E0D12E548DE9E6AC0F1661AAF3C17
+:1060100077B646D178AF336C03BB0936516D50610A
+:1060200059EF344460B9B356CC50597173611609B5
+:10603000E0DF111691C52261CAAA5E3D4012503BB5
+:10604000705884F6DC48FB83489F710CB802E83333
+:1060500091790506F4DFDFF9592ECE7FCB18DF17D3
+:106060000CB6AE5E337D7E01D0C3268B7C8E4C5F3A
+:106070002ED2F1C84340AFB0BFA7D56C833E07CF47
+:1060800057C2E6423BCCC208CFDF84B9F7C0DFAFCE
+:10609000316F22CECF74DE541CF79ACCA7255AC399
+:1060A0000601F6F59B14FB63B88F3B05F5F86C1100
+:1060B00071208DC57EFD6AFE9C6D79C2A603FC4FE2
+:1060C000E7E867A345E66240A29A51F106A463C1DE
+:1060D0006663AB60FD07330FDDCB802E1E1ED03113
+:1060E0002D9CAF5ECFCF3D7D20EC9400FD468F2AE6
+:1060F000165916F437AB5829F43F94297A55D89F8E
+:10610000E9DCD89FE90A6DBE0C599681FCD0887AEB
+:106110001BF5EF78F31B01CA44E9E2E1483857E286
+:106120002F054B3DF4291B3CFDF4FF85B2F452537F
+:10613000CBEFA1FC75A4BD19517772B0F8941D5036
+:10614000F6B0C9A3B364F2F902F7DFF1AB6F22A294
+:1061500045FFBEFA074EEF7BD98AA5CE22C0B8E92B
+:106160001D92579B75F97EFAE361E3A9D48FE1395B
+:10617000FB0DA25B10B0FFE10F717FD37506AF146A
+:1061800081E3D4177C3AFF38661E1D75FA4646280F
+:10619000F83E91B158DC3C8C1FB8687037C1B96FBC
+:1061A00091F94FA1AF1E8B48F8E991F1A4C091E994
+:1061B000B222917EEBD58A5EF085B34C3F7FD6E864
+:1061C00038FF0C5E126D38FF60B9D6CD608AC18E83
+:1061D00054D2275792A77F0079CA40D7BC976AFB51
+:1061E00033C20FF94A07FC78970C2FC03FC3F9253B
+:1061F00079FEBB64B8DD6510399C7E120227996E6A
+:1062000014BA50F62F98635869B41F9FECD7DD4736
+:106210002393098FE3FF83E3EF13C2DF3727D60110
+:106220001BB151FF984578FC5FC09F57B4FE0BF837
+:10623000EB0EC59F577F3DE2EF71D1D284FC800801
+:10624000C8A1D226C2F9580623FE2F93C22C9BE088
+:106250007C76E4FF9B88EF8F22DF2BFC3EA6D837AD
+:106260001EF5E449C69EC17DF9440FB5A766A71087
+:106270009F5FC7BA13B01DF09C3717F12ED876E890
+:10628000242C7DFB5E86F55D1506CB1E386FBF5B4B
+:1062900074A961FE8628F78EA5B06EC35D991617A6
+:1062A000B63396D58672A03CCC827ABE218ACB8545
+:1062B0008605E9A4870F7E2725ADC2732C08B33469
+:1062C00041FF866CDF2313A0DE30D66C7141D757B7
+:1062D0000596BE1DC7CFD1D13A0D7338DD363C329D
+:1062E000DA8D7A05F4CFF37AA83F591EC6F09C0DDB
+:1062F0008DB68468A0CB9722ECA3B361FFA3244E94
+:10630000D70DC9D00EE536A164C17D38DF78BE6FE8
+:10631000DF82B017F7C22CFA341059D07E7295B1D3
+:1063200009E5A5429777A5737937C6756A07C2C98B
+:10633000359D65D4C2FC7F93E94B81BB60636C558E
+:10634000B41FFE0A9DC5C8701756737A734D97E542
+:10635000623573D70B085FE60B07F8966941414237
+:106360006934D9ADB8EFFAE5801709F7CFE17F526C
+:1063700064E59E61F8E747282CF3884C04E48F32EB
+:10638000C6F9A30CE908E96F15D05100FD31DF759E
+:1063900051A7C3653A82F16B8D25D370BDCF853F80
+:1063A000E463E3897F4AF3875B67563697030BF410
+:1063B000F699D89FED8E14515FAE30F1F54E647FA3
+:1063C000361AF5C5C95FBD791D96C7234A6ECB86BF
+:1063D000FEDB167C5D84E2FC6F093E359EE36F0BAD
+:1063E000FEFF68B443CA56BF49F4FE43F759281963
+:1063F00032504EAF047DA615B0E474B0F23E467440
+:1064000090C86A896EE365FD050CA3473975F300F2
+:10641000D88ECABCF0FF4797746C89CE5F9FC6A226
+:1064200082EA33740941FD0B4DC941CF6F8D1F17AF
+:10643000F47CA6393BA83E3B635250FFDB2DD38250
+:10644000EA774E9C19D47F8E6D4E50DDC64C241FCA
+:106450003AEA8A733F01BBE1B5BA92DC4F5497E345
+:1064600063AAF6D07EB305E824DB3B5F3509EA91E9
+:10647000875626437D53CB115E4F3CF44532E06690
+:1064800073CBD1F92AD0DB536F3CF4450AD41F6D8E
+:10649000E9E2CFA7C062A340ACB6BC39DF05F89AE9
+:1064A0009B62DF8AF89A77A9F6288AF9F7D7CCBDDC
+:1064B0002F5942B930677406EC2737C5FE103EBF2E
+:1064C0002BF69E759100FB1F7D5BAB463CBF985D34
+:1064D000B215E9A1FF22A7F353889791FF7E099691
+:1064E00003D9618A9CBD923C54F8AD03F4C61215E1
+:1064F000C24947A5B7CE44E5A1BA782A8FD499D925
+:10650000128063575D0695C7EA2CD47EBC6E229537
+:1065100027EA6C54BE5B574C65775D09950AFFB25C
+:10652000BD960D6A2442972AEAB4CE4F8F57D263A4
+:106530002028D969059FD0F94DBDAD399BCE759DF9
+:1065400009E959693FDAF9815904FA9D6AD5113D83
+:106550004F35749B75565E47B9B8FB22F38A11BC60
+:106560009F2AB05F8C271BFD98A90E03F54B1B8457
+:106570007E59D8EFCD0494F7536B3516B4639E5013
+:1065800033971EF66F14DF90701DE320CA6CD80598
+:1065900018D53A905771A06BF139F4633A28770F08
+:1065A000F2F54647D72E47F934BACC60A9E7F29501
+:1065B000E44BE2086F02EE2F71A586DA8D628F1927
+:1065C000E5605F9D7716D269812CE70A345CEF3075
+:1065D00011E4BD807CFB6D5722DAF3EDDC9E2FD0F9
+:1065E00096EC44FAAE5671FE65317AF71E5C47D5DB
+:1065F0005DF12CF4EB894DB46C4268C51F64696091
+:10660000B717D61467A2DCED615B88AFC15EFD13DE
+:10661000D2DB8F3381DF459948609EF8E2F0A64DCA
+:1066200002DAADD7E7215DCED59A0F30E0075FF6ED
+:1066300000D1FBDC48731E7A0ABEECAF793DCE7CFC
+:106640004080E7263630BF00EA55CFE94D9F04F081
+:10665000A9D3131554AF694B307D12C0A755F80765
+:10666000FA47B7092A94BB0E792BA704FB05C4B7D8
+:10667000B3F8730DDFDF8006EDD88BD966A26FB05B
+:106680009749EF0FCC34BA9B60BF71236AB357A010
+:10669000FD9469CEC37E49EA8108F463FABF5515BB
+:1066A000BBC9EF1988F8C9783F7D3DD321517B28BC
+:1066B000DDB5E6707FAF26CDB019F1501DAFD351D7
+:1066C000D971B188919D56928676B94DC3FDCBD0D4
+:1066D000F17B73B81E495EAF21B940A208B66C0BBE
+:1066E000634ADDC52632D6F88BB021BF07C0C93456
+:1066F00063653FC8356247415A507F1BF61F7A8E4B
+:10670000F61CF38F4F7949BB63AD4A5E0FE96529EB
+:1067100073A33F182AC7AB72A365B9C0F1FC748C90
+:10672000BE11F19C26017DE750C94C50268633B23C
+:1067300037135FD7BB913E77EB39FDA789BCDC2DC2
+:10674000F2FE9A30E6427A57FC874DB9F629B979BC
+:10675000348F97E6915AB291AE139887D657EC24AE
+:10676000A51FD8437A1202AA8174C4D754491C16B3
+:106770009E2772A615E58C44FEB0B14F03E4775F07
+:1067800078C4AA40FC55E37843E0B8E9344E19EFE9
+:106790005C25B24F47905C243A72A689E42F564B91
+:1067A000EC8880FE16EBD6A09E53C6F5821CFC1426
+:1067B000F0F047908B587E08F210D7FF33C8432C77
+:1067C000FF0AF210DB4F823CC4D207F210DB3F0617
+:1067D0007988E5BCBB8D56E49F9AB669ECD3207EE0
+:1067E00050DB7D01F5DE69C3D39143A6A3DEE4E16E
+:1067F0009FAFCBE17E45EF2D1C9FFDA0BFD1FF00D9
+:10680000BA5C6B8ABEB21EEF37B2F91E80D3B67C7B
+:106810006E87F427F0FAD21C35D56D22DB8EE3B7F4
+:10682000E56BF8FA2962393EB745F3797BD345B277
+:106830009FA64E9EB624079EDB62A13DC75FEFBDBB
+:10684000813FB78DE2ED437A567E3E25D7A4F8EF1F
+:10685000E9DC2F65642701BDD3FC4AFFF726723EB1
+:106860000CEDEF4E138BDDC3C0E32D996F892FD054
+:106870009E463E480EE08B6A33F18542870AFD55FD
+:10688000E57238A769653A07DD42F0431D83723A25
+:106890004E4FF625C0C5C6E03CBB05995F42F901E5
+:1068A0004AD4070A3F287CA0D07B22F09910ED3F04
+:1068B000C7CD21F4AA948FCAE7E88E35FE9CF0DAA2
+:1068C000A136A1DF7733CC87E313C5C177EF46FE4E
+:1068D0008C359AD1F52C7CC8503B9C1CEBFAEFC24E
+:1068E00043910B5780C76570D0F0F25F8503C939BB
+:1068F00094E348BFC3C8ADFD39D1B25DCEE9F744DA
+:106900008E6D1FD251BFA057A1DFD0AF67C3DAD9B8
+:10691000DBF2397F287454053A10EB8978CED4CB5A
+:10692000E59E729EA1732E6324FFD2C2787B289EBF
+:10693000957305C8BFC33901F11FC6B87D711DD855
+:1069400017E84F4DC935D33EFA477E56B695F9CF75
+:106950007F470E6F7F4A94881E14FD32D42E488BD9
+:10696000E66406E91D66423FAF534BFCEE057FE649
+:106970002518873E219BE43FBF20E37170FE58112C
+:10698000EDBBBEAF0D2ED4637DA3064E0A30BE6FA5
+:106990003B18366497D86E1340EFDE073A06F5D4FD
+:1069A00005907B2C9DB173721CA1CF73F124FA73F7
+:1069B000353B24A603504A3BBE9A87F4B4B4536DCA
+:1069C000A2B8D0F6C78E213D9E6E15CC6897F4B55F
+:1069D000C2F1A1BFB3C1E8D643FF22A863FF650699
+:1069E0008DDBCCD7A3F883435EEF537D750AC68554
+:1069F00066EC5013DC973E2FB9D13E3BBC7DA50A17
+:106A0000EBA7DD028B837145D2EAAE04A8573E2D79
+:106A100058B430CE61283A8BF182CAE799C50BF39E
+:106A200057B618C9CF5DDAA0FED817605F94BBB720
+:106A30006AD0EE29DF19DC5EB93BB80EF822F9EF17
+:106A40006886F600F9FC6D8E3186ECCD712C1BED5D
+:106A50004DD6C0E3B98A7CBFDC6E757139BA82CB82
+:106A60006DC6BE8C457F5FEAFC2AE96303AFCF9118
+:106A7000EBA7A0FEF9571C2F0A5CAAE5B53F4F60B3
+:106A8000560F9CB7BA536F42FFBFBAFDEF1118B74C
+:106A9000AF09F3517C9FBD2299D0DEDBD826B91017
+:106AA000BECE0EFD2E11E0567DE03D8DD988705F83
+:106AB0004EF6CAADCCB51EE3DC5E5164DD4447DD65
+:106AC00014A766B681A5384F5FBBDE847640F52BF0
+:106AD0001F74DD8DF50302D3231E47FB884E96EE0F
+:106AE0004086A52DDD26E4FBE94442BC229E3D9173
+:106AF00084AF658877C433E01DF12C213E71BC5111
+:106B0000E3E6742251FDF4731CBF0ADE8BA4CD1A98
+:106B10006CAF6CE4789EB163CFB630A2033593E9D5
+:106B200080F07E7A27C7BBA6739D6614D26F630878
+:106B30001DB46B87E800F777191D84E0BF02F08D64
+:106B40007220940E42F1DF93C3E506D8DFA79F427F
+:106B5000FBDB087E01F3C7234656F51E8D81F5CA7F
+:106B6000A2CF3B9743FBD8F89758DA088A7F15E401
+:106B700062FC6BE63BEB105D3DB35EC8467AA957FD
+:106B8000FBF63C81718BA8708AE3F427CFD9F932E8
+:106B90009CBB20FA9BA416D87FCD6B5ABADE28C9BD
+:106BA0001587EC358C9729F174C033C5C99C1D5AE3
+:106BB0001E176B2DB405FA73FD09FC5C859A81B232
+:106BC000E5E817C07CB88E60E37E5E55078F172816
+:106BD0007E59951237680E8E1B08A677A85F452E42
+:106BE0008F5FA5C6DD6C463BBC7E01B387A55E4DBD
+:106BF0003FF078CCD3B2DF7445FBF10A7A42B11B87
+:106C0000992B386EA1C8A96513F91E8FFEE2B86AE8
+:106C100004C6FD760B848F8A0E904F70DE0AB7DAB9
+:106C20006D1602F849EEFF19D21BC0ED8CABF6A031
+:106C30002821DD1968BF0E993EAB918EE0BC95D638
+:106C40003722F09C0E59AE38DA8D147FAB645B8A24
+:106C500090EE2A613DEF30F454F95C0BF929D7A28C
+:106C600027C5CEAC6E0DEEB7317748CE8CFF1EE057
+:106C7000BB016439D77B2E99FE3223F1DE6F9099E8
+:106C800023919F87F49FC0ED3745FE5CBF1D583CA4
+:106C900060DE716E1D5305AC7FE373A6A0FA784FDA
+:106CA0007C50FF9BDACC41CFB3BD1941CF738F59D4
+:106CB00082EA79DD1383FA4FF8D016549FE42B0E45
+:106CC000EA3FE54C49507D3013CE7395FBC15BE341
+:106CD00085A0FE33CDFAA0F967674405D5070D32CC
+:106CE0007C64BB52B1775FCEE5F66E68A9C0F776DB
+:106CF0004BF03A8ABF7EE7C4E0F5E6D882D7FBA125
+:106D000078D90BFA54057EC273A05FB1FC1DF8134D
+:106D10002AF0139AC19FC0FA8BE04F60E9017F020D
+:106D2000DB5F027F02EBADE04F60FD20F83F586F64
+:106D3000AB2BA6F295BA126ABF16FCBAE4758FC9DE
+:106D4000EB1E97D7FD77E174429EEF5D79BE6E9C96
+:106D50002FCDFFDC593C56BC04FC3C2DFAACC68759
+:106D60007EC30A5F11C62D06DE9218C6A599DD7D89
+:106D7000AC2E06F5D9088A33B39281B731AE527D75
+:106D800020D5B4C98CFAEC0FEFE2F3BE56C98C7C67
+:106D900079A8EDEF1138CF854B61745F4A7A10EF17
+:106DA0001BBF6154DF04CF310E3AB3050408E93745
+:106DB0000FE9B70B694ADD4DF7BD25CD2D1AC45338
+:106DC00015F2293C7FCBA30E7EFE5C63D07313F6D5
+:106DD00087B24AE5A638C2B936653E2FF577A4F1E9
+:106DE0007BCF73CF1D5E3F05F56FCBE211787F5EE1
+:106DF000D5FC5EECBD57C1C7E7075FC8A4FBCA76E8
+:106E000098CFE09FCFD9AE96EB7CFF8EB496A26868
+:106E1000541CCD021B0BC505B685EE5FAADAF63809
+:106E2000506E5565DCAD66009F7E8F24C737F8BD78
+:106E300091C3C4B81DE7F92202EF575FF71CBDC329
+:106E400086F8ED381C81EBF6B74A41FED3682BB7C4
+:106E50008F475B3584BF0BAD8723F05E77A3E730A8
+:106E600087BBCA4BE73F24D7FBA12478B74974FE00
+:106E70008A4B62D03D768655A27966B68D35E2B9E9
+:106E80007A3C7CBD1CAB99B7A72D5E82FB3F1EBF31
+:106E9000204F227B100435CAF11B66EF413BA4CA88
+:106EA00023D986F3EF0AE479BBD49C4EDF4ADBDFBB
+:106EB00085F2F878F1886CD2118A9F69E5766F9136
+:106EC000C69E867AA4C76036229D3F589C6A44FCC1
+:106ED0001EC212DB8B7769EC06BCC7E6EBF598BAED
+:106EE0002390EE7A5A7325B47794F9F2E57587E822
+:106EF0007B086F2EC253B9BBD180F3F8F1C7DB73A7
+:106F0000AC26EA7FDCFDDE3CB4AB7A32C2C92EE9A6
+:106F1000D230F2A7AB9AB95DDCD391D818784F92F2
+:106F20006395FDF20C91F0DAD7A696FBDDBD8705DF
+:106F3000F553D3392FEC0EDE8FC97DEA51B4C71D4E
+:106F40004F4B0CF5A2435D1B8BE7FF6C67F0FECA4D
+:106F500065383BD4DED8D8007A75B40FF18D81E85E
+:106F6000BC5DE11333E153C1634F06B7E77AE2F941
+:106F7000BDA4A3650FD1F5E5F1A4EE64F41F127F63
+:106F8000A9A378E7B5FC67C56E08F0AF18FA8BEADD
+:106F9000E2D43C31C56F1FBC966BABB68E44BFAB21
+:106FA00084FCCA1E06F62CACE9447B3A92F21FB66A
+:106FB000E1BA83AD6ABABF76EADA667D0276D9A015
+:106FC000051805F63DB8532DDF7BD90C68D72E95F3
+:106FD000EDDACFCCF67C09F4AF738D48E7736486A5
+:106FE000911FD327CBBDCF5B92EF24BBE1986442C6
+:106FF0007F688687DBC18E666ED7567B92FF632AD9
+:10700000DAEDCD6ACCD4608A1DE294ED90D3B2DD86
+:107010007B7ACD8086FC9B4E813D968C792A5BBB2A
+:1070200012E1B9337316D9B34EA999EC8965DB83A4
+:10703000ED07B06F82EA55CF85DA17727CCB13DC8F
+:10704000AEF887DBAC4376C638F4670AA5A971C8E9
+:107050000F2FC87855FC9B95E32D94B7B351659ECF
+:10706000A5C421105E359DFB2B70DF6E479885FC13
+:107070008D55AF105CFBBFE47E4C7F3C2378F4332E
+:107080000EDFFE364EE7356AC18DF9483540B6341D
+:107090009F4E70AFC138B36B3082E41363C5C8171D
+:1070A0002B16707FD586315F286B157E08D1ABB764
+:1070B000A87C5254809C68B3A650BF020DB3A33E77
+:1070C0005B69B4907E1BA3E3767AE16A4F36D2C344
+:1070D00018F0C7B501F1F831860101FBED7E80C7DC
+:1070E000FF9578C21C95491D15A01F195B43FD959E
+:1070F000F941A2F0F1D79ADF04F31BFCF303BC23A0
+:1071000011DE5F582DA4B793E628F7FFB5C497CAE0
+:10711000792E00BD611C1863348837C7CE37C89FED
+:1071200073B2EEF538AE2882EFA308F783F5305E30
+:10713000FE5196E7B179BCBC4D2E15F9D590677B11
+:10714000DF0AF59579F63F5949AE99883E57CAB49A
+:1071500002F64C9C6F18F9BBE21D89F0FA05F003AA
+:10716000F2FBC25AC19C16642F713AAFE14DEC3C60
+:10717000F3F44E4538B86CDD1998D7C6387F2D5AD0
+:10718000A537A705DE0720BDA3FF5102FFF2D12FCF
+:10719000E3BF7253C56D9457B52AD68CF71735C81F
+:1071A0000F29D7A6FF50BA87DF4EA4B76AA6B5A0AD
+:1071B0007EA9690B7D6E51A13DFE4D085F24C97407
+:1071C000DA6817E87EBDF15B158FA3950A1437BB0B
+:1071D0000B1A914EE987FDCAA7B9717ECCB3A0FB0B
+:1071E000AE861839EF2B86EEE17E229FFF2E95F7B3
+:1071F0000DE4EFA36A4F32C6718E3AF93DD502E62F
+:10720000A17BDD52D64D656F78F5012F4DEE1A8DBD
+:107210007EF807762DC5911AD7361951CE66B1B5CD
+:1072200026BC1F033679EEFBDC2BDB1BA1F7689431
+:107230009F95E7C7F3CABC92F83CA0833380A3F8BC
+:107240009CCBC757BD7F2002E17EFEFEFDF37ECAC8
+:10725000D00F02B905F354D6B664D0BD8C8B7567D8
+:10726000E4FBF1ABE053C11FB49983F00A67B90E98
+:10727000E0339F0DE4636ED3B5F0A9C039493DF00A
+:10728000630425E8319243A17856E05ECD6AD53C8F
+:10729000FE56FBEE02E8FFB3B5A219EDCACBF07EB5
+:1072A0000DFC78F5FC91D728903F7B257C29785AF6
+:1072B000C8BC54FF308A8FFB70A144F1C3FF697CC6
+:1072C00035E4D94BF2AEC2B7A17C7A25BE5CB42AB4
+:1072D000847F43F874882F2DF02F007FF65511C45A
+:1072E0008F0A7E1D66F09351FF75182D6E76393E1C
+:1072F000D1DFC5FD54B60AEC49E187F0AB8FFCE362
+:10730000507C01ADD8501F54E705F3A982C72BC9A3
+:107310002D45EE7DC4BC474D02DD67703EFE85966F
+:10732000F2E994FB0CE5DEE2D13CAE6F42CB8FC0BC
+:107330006EC17BA24D193D23D1DEEBD528F3F07B46
+:10734000D78FD6748FC67CCD8FA6F1B257C3F34CBE
+:1073500094BA2D8CC7033F4AD0BA106E1F09E3A61A
+:10736000A31DF091F0CB3B783D4E63C6FA82B8E99D
+:1073700026A8F7AA95F8E183B2FC7653F9D18209E1
+:1073800005D44F6047101E668195D03A82105D0C7F
+:10739000FBF9E8E76373F05E4039FF03793C8EF454
+:1073A0001BF91C43F1F65F09146F5F04AAC384F74D
+:1073B00002D39F284E81F693BF4ECDA6FBCA15C1BE
+:1073C000EBA3FE4DA638E5569AE7964B03EAC5991E
+:1073D000FE7D0DE9CD828BBC7DC9D8A07C665BF4B7
+:1073E00038EE27BB5323518F297A6DF0D87E436046
+:1073F0001CF5AC1C771EAA8F7B2429502FBEB1F739
+:10740000E1749CA75CE3CAB218308FF9A924B41FB9
+:10741000CAF73E944E76EDDE8DE9E89F94373D9CA9
+:107420006EA37AB89DFC23153FF7F97D93766D0A1C
+:10743000B0A36F9DC0EDFB52DD1B8568DFCEBAF1B6
+:10744000F37518B71FFB6B81E2700B59F73AD4B78D
+:1074500065199CAF58838EE43FCC47F7A47BC6DD0B
+:10746000BE1BE5FEF18CBFAB97A0FECD53D17C6572
+:10747000CCBD390EE36F1B048ABFF9FB8FA67BD707
+:10748000C56B054D7C0CEA519E77FDC7BC2882E395
+:107490003D1BB2BBB0BD6C356F9FA575B7F6E03C28
+:1074A0004F6828CF0A14654A49C03DF61FF3F83DDE
+:1074B000DDA2CD72BEB1BCCED86DB18D81E7FCA38B
+:1074C0008C7F56FE01C9833B65BCDCB6FABD23F157
+:1074D000306FA4DAFE67942BEF3E7E3A0DE55941FA
+:1074E000F4D94CA4F3B11AFB931578EE262DC52BD5
+:1074F000AD5989521CF4CFB97FDA63582E5ABDF8C2
+:10750000C90A8CFB6ED7911FA6EC6F856016D15F00
+:107510003DDCF8D37B106E671EE779A42B1AAF8F82
+:10752000BB5AFEE2B3753C1FFCF93A1D952FD49966
+:1075300098198EB8AF2E9EEABFAF3353C9E673FADF
+:1075400052F2A6AE345FEEA530CA5BB66ED0511EC5
+:107550007DAED6F6551EC06BEC0DCEA68DF2B9C62B
+:10756000C2F86C57F20C848375E3F22E34614FE558
+:1075700071FFEAED9E0D496487AF3EF54C053CCFA7
+:10758000CC2FF90EC7EB765EA478C1E1F687CA105E
+:10759000DEE54D5A7E3EF9DC671E4F8F7B12E3BC61
+:1075A0006FA9C97FAFD979EA998D50DEBB79B92629
+:1075B00090DE7FE879BF95F7732DBEBA121CFE7579
+:1075C000BE7A3889F8A709F82AF3DFE7AB9AD56BBA
+:1075D000087E73F34BC6E6C3FECFA85D49C84F676C
+:1075E000C6DD4C74EEEA1408FE8A1C57C6A7E6F303
+:1075F000FBE82AD1B399EC48598E7F059E23C2F748
+:107600008DF6CFD2D18EFEAA6DC155CF7DB00E3D85
+:10761000228C9BE9A80C7D9EAFB1A7625E71BEC8AB
+:10762000EDE7D0E7B7E72B71781EB7C59F1090A79D
+:10763000E2848D4546A3FE13BC6120979D6DB79EE5
+:1076400055A1FF067EE1C7C17628FB3840AF5F69D0
+:10765000BFD72AAB711E955FEE4EF85064DE003D39
+:107660003EC917C6BC01EB0EF92BD0A6A1FB9E04A8
+:10767000920B8837CC87EA6B1FD784F5B31A8EC775
+:10768000BE83E097F1B80C93F2FDE73CDB7E3E0B46
+:10769000E56CE879AB5F394FF4E1687BE8A240E73D
+:1076A0009F79569575EDF3BFB1F77C16E2EFACDA32
+:1076B000978FFE579FC6978578A87E95CBF37F1549
+:1076C0000E4A7BC5060D8F130A26F2230BA50B1459
+:1076D00007E83BC6E300D5EDBB489E0E76F0784C3C
+:1076E0008DD85D1487F18BDA535D28CF06E3B95F3F
+:1076F00006F3DB28CF2155D683AA81A43920D71ED3
+:1077000019A207EE0F9E41FED5E03C1E07E561651C
+:107710008533B42BCE213F437BD9AAE4F548E767F4
+:10772000DC2373503EBE9DF58F6A8ADFBD1E6E92CC
+:10773000C88E9530C778084E43E7704B3CD18729F7
+:10774000767138B305F4ABD198EF24BFFA38BF9FF8
+:10775000ABB981F3137B85F39373ED1B9AF880F932
+:107760007E25F393624FCE7AFD1FC4970FE7DA9E12
+:1077700040BE0C475988F3C547521EB5F21E8772AA
+:107780001F69E890FDF862899ED7B4490CEFE5586F
+:10779000BC91F20A8AD916CAB79CC53C53795E8F50
+:1077A000EFD129F07CF6EB522EE6A1813D4DF7DBBF
+:1077B0004561F634CCD3EA150519AE1EEB9C007D6D
+:1077C000F67E3EF757A74A02E9B1818470B253664C
+:1077D000CE7796E27E957E5A91EB339887EC2CE635
+:1077E0001EC8C27B55E61DC8C2FB56A5DFBCD7C369
+:1077F0006B492F328F755EC03AA7F379BCF30BBC8F
+:107800001F07795223DFC3164ADF6E437F6B45277C
+:10781000BF7FEC15933FC03C3317C019F17A1EF0BF
+:107820006A43FD6367361BF2CFF8916EE49F9A7D41
+:1078300002C37CBDEA766D13C685AAD5BE58A4E7FF
+:107840008D6DEF6B909E6BF05E763C8E6772BCDC4C
+:107850004479BF3526C6EFF5DAAEFF00E376CE6396
+:107860005C8B3A55EF513C00E536AE57D5DA42FE17
+:10787000BF8379C9FF773407D3CD603C8FE787F2A8
+:10788000C9E97C73107FCCDCCEF9631EE6731B68FC
+:1078900038C55F67C6C7915DE21FC7F16093CEAF81
+:1078A000433BA63F45A07CFCFE30D75AB48F5CE931
+:1078B000DCAEE97FED052BBDF7A3735B7F8CF93C54
+:1078C000B2DD3B73C3569514B09F991D3CDED81FA3
+:1078D000C6CA0F12DEEDD7213E7CB92567F231BE54
+:1078E000A31978770AC683441E1F0D3D875D8E6BF2
+:1078F0001C67FCFD2865DFB31313B93C636EA2A3BC
+:107900002E39BF5BC9D751C6DF324150EED1B89F87
+:107910002458AEFA5E1ADED7609E2BDED760F93BA4
+:10792000391F16EF6BB0FEA29C0F8BF735D88EF780
+:1079300035586F95F361F1BE06EB785F83E52B72E6
+:107940003EEC71DC2AE5F16D7C0AE9A20B796D94BD
+:10795000BFDE1B1D521F15DCBF375A08AE8F12A8A1
+:10796000BF69C2C6A730FF7893922FC5CC46B4C377
+:107970002AC2F9FB1AA9067BEC04F4F38B77ED45D8
+:107980007F1EF89BDE9F2B885E504AEF97C46819D4
+:10799000CAA3DB27D8474F80F1C78ECD48DB4A7298
+:1079A000524FF7ECBD3FBB3192E27A6F494C8225D2
+:1079B000A765E4AEB5427D9A4120FA85F96E2A5159
+:1079C000FC4C986746C762AB8ACB0713DACB85922B
+:1079D0006309AEB322419F8B72F888D59E81FB511B
+:1079E000E05D346A591ADA455D6AF307189F75BD80
+:1079F000A366E85729713CA5DF93D669F9B8BF990A
+:107A000019A96B73707E60369477360D6BC6FDD9FD
+:107A1000C470A19EE4975985F2207F02A79BE96676
+:107A20006E1F7B35665534FAF561D362F05EB74B55
+:107A3000C6F33119CFC7653CE33D57818ADF7361D7
+:107A400089F75C5886E6A32DCF2FB14D20780F24FF
+:107A500005E6B3CD92DF97000AA1F7D49C721CF320
+:107A60004B59EE34E695DCCAC779689E2A398E7781
+:107A70005E1D7C6FA88CF38F6754CEBD89CB6B16CF
+:107A8000A9E179BFD73117E615CF7D3981E2507D65
+:107A90006ED1A506BCCF055E4779C65EE6FE2E8B8D
+:107AA000E77C33777F1CF5AB97E3A9CEE8EE747CD7
+:107AB000AFA34FE62FA57EF03B9E97E4CC81BA8121
+:107AC000DE23A1F339E776A74741BD4FD08B485F4E
+:107AD000CE26FEBC47E63F678A3C9F7C1EA6F32469
+:107AE000213EFA3B5F4EC2F7103719BC4BB9FCF789
+:107AF000A693DC66DE74CC6F3A2F784E62BEF1AD91
+:107B00006D29A5986F7F5EED7906EBB3DBD2785DCA
+:107B10006839690A7C3ED29384F9C8B7B6A59662E3
+:107B20003EF2F9912DCF445902EAEA974EE273CD25
+:107B30008369A5989F3C5BEB3E568774F37B4E5F51
+:107B4000FA7D074E237CAADAB9FD3E7DDF810B2F3B
+:107B5000A17E3E60A4BC8275139209DFF5EDCF6E65
+:107B6000467AEB6B51133F6C6A7EFF99DF503F2DD5
+:107B70008559666B3D560CC994B41DBA1BF7353B4D
+:107B8000DCF325D6174FBC89F6317B04E7EBA51350
+:107B9000734A914FFB0EECFB05EAB3D99160D8E232
+:107BA0007E5ED0137E2AF78F2BC0B8409FB1BB0CEE
+:107BB000E7AFFE9D96E71FEC8F9B8E7182FF9CC006
+:107BC000F3312A6ED89284FA567CE5F9BDBFC1F82C
+:107BD000E6EFF474DF5313CDEDBD4AA9317F39E1EF
+:107BE0006FD75ECC5BE97B5E4FF7AF151893B3E2BE
+:107BF0007BAC63293EFFEA3FFF5E8678289476EEF1
+:107C0000C5F62F77EB4584438FC6167933F2618F23
+:107C10009AFCCE0AB95ED13B82EF27DC5744F88B41
+:107C2000D99284FAB672C4AFEEC07DCF96B63C83CB
+:107C30007E0F7B564B770E679F07B8C1B8B37BD4D6
+:107C4000984903FB30AA905ECE0B5BCA9EC4F9F73D
+:107C5000F07EE7F55B089EAE3DD7335C0FFA31D47A
+:107C6000C7E785AD41ED67F73C9B857EE9B9DFCD80
+:107C700026FF54A173855F2A776B83F422498258CB
+:107C80008C5BCA3F938B1902E259E70EEEE87B92B8
+:107C9000F9C79F6B567B3500A30A2D5B8BF9CD0A84
+:107CA0003F5426DE5A8CE7AB141BD3D17EA9C8F50E
+:107CB00095215F9CD5335D3CF47B5BD65B95AD6BCA
+:107CC000E6A01D7CA5FDFC4596475FC97CF8559B49
+:107CD000DE1D78DF185AFEB58E994FA8FCF585B5E4
+:107CE0005AB2E595F9DED6781CE8AF554773F971BD
+:107CF00012FA37831CFB93ACEF16AD0AEEFFEE04CD
+:107D00009E4F59ADF1A5A3FE53E67F7B8289DB87A9
+:107D10002A5F3ACAABD071B32559DEBC2090BCA90A
+:107D20006C154ED1FB2408D2583F3C2B752E37E6FC
+:107D3000130D8787F87C190F12E6F170BEAA6CD676
+:107D4000DBF4304F55982F02ED2587D117817650FF
+:107D5000DF2B126B92D117A3CC9FE25F4F89535652
+:107D600078D436FD70EBC171D04F5E867F03285604
+:107D70004FE47C53DE164EEB31932F1FE9B67C6740
+:107D8000F0383CA729801FFBDA76C506FAEB0CF722
+:107D90004DF751A7886FFAFFF931BD075E29B2B5DB
+:107DA000784F794EE0EF83409DDE073927DF775625
+:107DB0007E6D0843FA39F79583F8B84FF0919C7BB4
+:107DC000B1CD4672AC4FED2339B76B6211AF47F9B5
+:107DD000CA506EBD38F1A7243FFA127C65F89ED2D6
+:107DE00066A58E2FCC811DD0D1B690E4C96C89E7F1
+:107DF00051B05D6A138F1371782F93E1C4D886DE7A
+:107E00003AF243D466B4973A272AF7421AFFF92583
+:107E10003F3FF531F3BE56E4CF7203C57DC0BE6A65
+:107E20007E09EDC005B1168CA787C24DB95F8C895C
+:107E3000FE6629E2E91DA37DECC43CBCCFF4919F12
+:107E400001D44EF67CF56B5AF237FBD5037B517E9D
+:107E5000B98DF67113019E0E4DF77A547117D4BE89
+:107E60002E34ED6721BD911CE1F4D697B98BBF0785
+:107E700022DF4F4E92F100FA8C35227D081CCF870D
+:107E8000DBF69F4079D3D79D4A723A949FCEB63D98
+:107E9000168172E343D0EFAE8078C0878B9FA57CBC
+:107EA00080F9980702E53D6B83CF37F8ED8FC92F36
+:107EB000649B03DA911E1B82EBA17041BAF406F1B8
+:107EC000818BF67D3FF21BC0A76A7A7735C261A825
+:107ED0003E17EA5240FD50483DA43F2BE1F6C3FD5A
+:107EE0001318CDEB18EDED253F7E1FCFEFAD07BD8D
+:107EF00046F503E1743F2DEE03BD15C3F516EA8B7D
+:107F0000AA886E8A5FF51DD0D2BDCA83ED9F25E198
+:107F1000F9811E294E53D5FE722CFAF7EB2698698B
+:107F20007ED08FB1941773A03D16FD11A5DD217A87
+:107F3000D2E5F70CB2507E28ED4EC99B4E79E54252
+:107F400077163E5F27CB1987087509EB8CCEE110B9
+:107F500038DFB37689E47C28DE56C9F40AF2218B37
+:107F6000F2395EE1F103451E54C872E510B667723E
+:107F7000FE3729F75278CF847C3F8C9CF85A8123B6
+:107F8000ABA5F8CEFD13CDBC2E8FA77979FC89E780
+:107F9000EDBD7A3E2B2513C79995F745FDF228D5FF
+:107FA0002F5F500EC4931C78501D0BE7AA7C46B07F
+:107FB000D4C3908AD23545D09D2D532D2FA2B81A07
+:107FC000E6E71A2EDF57281D454EE4F8AD14B91F19
+:107FD0005EB957A0FBA5736A7E6F07F286DE0F5865
+:107FE00056B0A608F9EFBE18A726D05FBED6FC4B48
+:107FF0001B82EBCB6AD714C50DC3E795ABB6768D64
+:108000006497CF57616F2C8A355FDEAEECFB9C5EC8
+:10801000D9E774F5C84078CC5F533412CA65BA7F8B
+:10802000171EFCDCE7DAB55ECA572D5D43F7C4B70F
+:108030005CAA0D8AB35E6BBE0AE6A67B902BED3F71
+:10804000B47408DE5E8C2B31E0AF3DC467C03701ED
+:10805000EBC5CBF43A149F285F3C06FD53665F3CAA
+:1080600026303E115AE29B3322E58AB8A8043E2C02
+:10807000B30C030FA5FFD1893CCE1A3F91D3F1A8D1
+:10808000D9553B5E6214D7E941F97BA5F74CFE2236
+:10809000EFEF07BF6732239CF7EBD49B30FED3DFB3
+:1080A000F90DC587FBD719E6F37B07034B80E75D26
+:1080B000F1E39B02E3C0AB26713B24DCCAED9D9A41
+:1080C0000CF5D5E34B99C6A1F812D91B99E174DFE1
+:1080D000D2D7F605E9B7FE8E3C13DE8BF475BB0DE7
+:1080E000C86F35FFFC7FB1A887FB3A3EA5BCB4BE84
+:1080F0006F3FA37CB58D72DEE0A13639DFABDB6C60
+:10810000C4F6FEE2BF1761BF4D72E98F2FF0F898F9
+:10811000522AF18300FFF93BD4537B4C1B1FC554FB
+:1081200099CAB02D24BFC07F8E46BDE18F2B98E346
+:10813000868BC304C615D2543CAE8025C615D2D258
+:10814000785C01EB1857C012E30AD88E7105AC6356
+:108150005C01EB1857C03AC615B0C4B802B67F2907
+:10816000BFE7D10F828BC73D0D24F757627E33C026
+:108170006F6527BFBF5AB947A27B617CCF03F5DF8C
+:1081800065793BAD72DE8E672BDD07D61C902C889F
+:10819000227C1FC4958EF93B0347311E54D32258CD
+:1081A000D698B17D3EED636347DE07A5D8BE476D27
+:1081B00011CD444F1C9F8D825B8F7CD5B187E257D8
+:1081C00005719D94EF5FD32C308CBBCED3723FD919
+:1081D00029416B0EDDAB921DEDD47693FF52F59CD9
+:1081E000600E7CEFBB66E2459213CA7DF552FE88B5
+:1081F000393D7AF392203D6BE37957F827ECC72994
+:10820000E777931D1260172DC57B6C6C97BEA5F7A1
+:108210004D9CE0E08E10AE9D7755D9D1B21EF3B5DE
+:108220007E68FE55E124F9DE3A9BBF4752FCF89286
+:108230007D0760BDC12D5AB2536E9F60BF6D521E47
+:10824000E619D828EE72B4534F7ED6275BAF0F8A5B
+:10825000BB144AD751DC63855A20FD7DC46A9F3B1D
+:1082600009E87246F1BD146F99116F243E56E8F08B
+:10827000496BC94F70DE15E3F977980AB5ECE7341E
+:108280009F9CCFA5E0A9B05E70E3F72C16330BBD21
+:108290003FB008C0877151E5FB1F8B18CFAF50E886
+:1082A0006AC55681E88ABEBC10F0BD8445F83D1011
+:1082B000D07FF76AB9FD9B28F27BF2C44D3C8FE278
+:1082C0003E66A7FC9165487D12E9D7D77CD06E0F3A
+:1082D000BF2E89DBF7E6389C7FF17135E50717C6BD
+:1082E000DD9E6E273D5F40F91382F76EE9FB1BAF01
+:1082F000263F83F3278EAAB9DC0178929FD585F4B7
+:108300004AF11E3B95C7EBCAA99C22BF1F16FA5E15
+:10831000437FE7CB2D38BEB0C66041F85FF13DC06A
+:10832000B0ABBFFFE694F3EB12C59E5C33C2E36BC8
+:108330008305E15118D749EF89A5CAF33F9C5BB289
+:1083400009F1698B602E5C1FEF69B6007C8BF040F1
+:1083500002C6D13D367CCF66A05330513EF56572E2
+:1083600074EB3ACC53A949134C18AF2D0ADB5218C1
+:108370000BF317A524D377766ADA781CB60F4A4E2A
+:108380000753DC92C0C7AA62317ECFF1E8CBB53F7C
+:108390003D29CFDF3E5BE6B3FE8E2F781EF1B5E3BD
+:1083A000B4BBE9FB1C4C4FEFAFD30FF635FBC6D186
+:1083B00014AF55E868B039AE09E9A845D613A5A5AC
+:1083C000EFA9D18E68CCB337231CCA965C5C174BDF
+:1083D000E71C3E4EA6E4DF87C6C902E5EDFF46DE98
+:1083E000FD89BA5A2ADFAD5B4565779D8B9E07E80C
+:1083F0008B2308BF1F106F7D7BD230F156A6334709
+:1084000092BE05BEE7F1ED90F82AF0BB18C0EF333D
+:108410003AA2EED980F64883C682F7CD98FFBCD247
+:1084200040F2E1FD49C3C65915F819282E3BC8F49E
+:10843000398887E919A92A119EFF6D921014E74423
+:10844000BEC17322DF60897CA352F9F9E6690DA3EE
+:10845000EF94A17DE022FB404FF85DBF06E40AD413
+:10846000EF65A620B9722144AE8023F3337A5FAC66
+:1084700043CB3609FEFCCFE9505CCA1946CE78B82A
+:108480009C191DE6799EBEB3501D46F9C5C0EF4448
+:10849000674737F2BCBD25AC84D61D46DED07B3E97
+:1084A000F78E1838F914F4BFF76103D939EB139636
+:1084B000E6FF77E4CD9F2771783C81DF73505DED57
+:1084C0007B0E9B05BC8F5DB1906523BE95EF39C4D3
+:1084D000C118F27BFFF5EF398C983C12BFE7E00A38
+:1084E000FA9E43DC15BEE7306AB27161E0F71C46C4
+:1084F0004D1EB130F87B0EC685F89DB2FFC1EF3935
+:10850000A44FCEBBFC7B0E374E36FFA0EF39803D2B
+:108510009B89E34FE4D8C66399289F3BF4FDE5E3CC
+:10852000F23D6497682FC5B228C2A5A276D16DC569
+:10853000F26DD1733FB6035F4C4478153D967D03D1
+:108540007E972551EBA1BCF227ADB64938FF6BB938
+:10855000B6C9F83C34DE5F2F9F0FF6730BF60BCDD8
+:108560001F53E8E2AEC95C0ECD93CBA9F5C3BFC7DC
+:108570003F6F32BF4FBED6BE61BF77E07ACAFED929
+:1085800096C556DC0FECF74EDC27ECB7044B66883B
+:108590000E7A0FF8727A75C9FB62742E908FB33F12
+:1085A000E1F62895E92A7714DA0DA31E7047E17EDB
+:1085B00047350EE8F17D90DFBA06F4683FFC76F5AA
+:1085C000801EDB7F6BE3F9DAA1F36F9FCCFD91F4A2
+:1085D000A903347E0CFCDD4DFEC14014DA6DE9E5E3
+:1085E0004734AE147A4F6DF62741769399F87B8C19
+:1085F000DC36E60191213D8CD9C1781E63410CE93E
+:10860000B94A1DEF5AF9C0FD22D2D13837EC3B8070
+:10861000FEAEDFAE1A0C7EAFD74BE3AAE425C05EF8
+:108620000B7AEE643CBF74942C8FD05EC4EFD939C2
+:10863000CB8FD077A6C08E0B998FBE7930944F59CF
+:10864000ADB3BFE63353BE6250BFA577FF663DFAB8
+:10865000B5E5A55B35E4172F69598FA5C3F19E26B3
+:108660008E917D19D41FECCBA0FA65FB0CD947F590
+:10867000FD17D7C70DB32ED0C156A413850E8EAAF1
+:108680003DE3D04F3DEA0CB3F0F71D3CF45D9A2674
+:10869000F9BDF45DFF39DDCAF365395DC0F81D3FF2
+:1086A0008C8EEAA9BFF21DAF6B958A1C1CFACE8D89
+:1086B00086B9285E39CB4872AE46F6FFAA9798C8AD
+:1086C0001E51F8BA5AE539B51EFBC51879FE9B8ACA
+:1086D000D1F7AB7AC45194CF4D3FACCF4AA5FBAC98
+:1086E000D87A8F17E71DB85DA0EFB9158473B95A12
+:1086F0002896389E85E74744FE5D81A7517E4898BD
+:1087000047C1BF37302597BF3F10CFF877DB98CAF6
+:108710001CF29D36391E7AEDEFB4F1EF92CDE7F7FA
+:10872000720D5125A5CBF1F9821BE8F9C1EF521F5B
+:10873000B1E2FE2A94EFB4717BBF614E063D7F55D6
+:1087400030AF413DE17A805DE93B6D7AE4FB80EF3B
+:10875000B3BD87F8BAD6F7D994EF0F1C5D70C32369
+:108760007B391CBD78EF5533CB18E4AFFF17313C94
+:108770009ED2C05600000000000000000000000073
+:088780000408350000000000B0
+:00000001FF
diff --git a/firmware/bnx2x-e1h-4.8.53.0.fw.ihex b/firmware/bnx2x-e1h-4.8.53.0.fw.ihex
new file mode 100644
index 00000000000..48d7612907e
--- /dev/null
+++ b/firmware/bnx2x-e1h-4.8.53.0.fw.ihex
@@ -0,0 +1,12028 @@
+:10000000000039D8000000600000063000003A40CF
+:100010000000191C000040780000009C0000599866
+:10002000000082E400005A38000000D40000DD2007
+:100030000000C7CC0000DDF8000000780001A5C872
+:10004000000056980001A648000000C00001FCE82E
+:100050000000F1D40001FDB0000000040002EF88B0
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040004000000FF02040008000000FF79
+:100170000204000C000000FF02040010000000FF59
+:1001800002040014000000FF02040018000000FF39
+:100190000204001C000000FF02040020000000FF19
+:1001A000020400240000003E0204002800000000B9
+:1001B0000204002C0000003F020400300000003F59
+:1001C000020400340000003F020400380000003F39
+:1001D0000204003C0000003F020400400000003F19
+:1001E000020400440000003F020404CC00000001AF
+:1001F00002042008000002110204200C000002008A
+:10020000020420100000020402042014000002195D
+:100210000204201C0000FFFF020420200000FFFF5A
+:10022000020420240000FFFF020420280000FFFF3A
+:1002300002042038000000200204203C00000000DE
+:100240000204204000000034020420440000003575
+:10025000060420480000001C020420B80000000131
+:10026000060420BC0000005F0204223807FFFFFFE5
+:100270000204223C0000003F0204224007FFFFFF6F
+:10028000020422440000000F010422480000000084
+:100290000104224C00000000010422500000000074
+:1002A0000104225400000000010422580000000054
+:1002B0000104225C00000000010422600000000034
+:1002C0000104226400000000010422680000000014
+:1002D0000104226C000000000104227000000000F4
+:1002E00001042274000000000104227800000000D4
+:1002F0000104227C000000000C042000000003E840
+:100300000A042000000000010B0420000000000A85
+:1003100002050044000000200205004800000032F1
+:10032000020500900215002002050094021500202D
+:1003300002050098000000300205009C0810000033
+:10034000020500A000000033020500A400000030F8
+:10035000020500A800000031020500AC0000000208
+:10036000020500B000000005020500B40000000610
+:10037000020500B800000002020500BC00000002F7
+:10038000020500C000000000020500C400000005D6
+:10039000020500C800000002020500CC00000002B7
+:1003A000020500D000000002020500D40000000198
+:1003B00002050114000000010205011C00000001FB
+:1003C00002050120000000020205020400000001F5
+:1003D0000205020C0000004002050210000000406F
+:1003E0000205021C0000002002050220000000138C
+:1003F0000205022400000020060502400000000A59
+:1004000004050280002000000205005000000007E3
+:100410000205005400000007020500580000000813
+:100420000205005C000000080205006000000001F9
+:100430000605006400000003020500D80000000665
+:100440000205000400000001020500080000000190
+:100450000205000C00000001020500100000000170
+:100460000205001400000001020500180000000150
+:100470000205001C00000001020500200000000130
+:100480000205002400000001020500280000000110
+:100490000205002C000000010205003000000001F0
+:1004A00002050034000000010205003800000001D0
+:1004B0000205003C000000010205004000000001B0
+:1004C000020500E00000000D020500E80000000742
+:1004D000020500F000000007020500F80000000718
+:1004E000020500E40000002D020500EC00000027DA
+:1004F000020500F400000027020500FC00000027B0
+:10050000020500E00000001D020500E800000017E1
+:10051000020500F000000017020500F800000017B7
+:10052000020500E40000003D020500EC0000003779
+:10053000020500F400000037020500FC000000374F
+:10054000020500E00000004D020500E80000004741
+:10055000020500F000000047020500F80000004717
+:10056000020500E40000006D020500EC00000067D9
+:10057000020500F400000067020500FC00000067AF
+:10058000020500E00000005D020500E800000057E1
+:10059000020500F000000057020500F800000057B7
+:1005A000020500E40000007D020500EC0000007779
+:1005B000020500F400000077020500FC000000774F
+:1005C0000406100002000020020600DC000000010A
+:1005D000010600D80000000004060200000302200B
+:1005E000020600DC00000000010600B80000000068
+:1005F000010600C800000000010600BC0000000069
+:10060000010600CC0000000007180400009B000059
+:1006100008180798000D0223071C0000325E000036
+:10062000071C800035960C98071D00001AEA19FE79
+:10063000081D43D057860225011800000000000065
+:10064000011800040000000001180008000000006C
+:100650000118000C0000000001180010000000004C
+:100660000118001400000000021800200000000122
+:1006700002180024000000020218002800000003F5
+:100680000218002C000000000218003000000004D6
+:1006900002180034000000010218003800000000B9
+:1006A0000218003C00000001021800400000000495
+:1006B0000218004400000000021800480000000179
+:1006C0000218004C00000003021800500000000057
+:1006D0000218005400000001021800580000000435
+:1006E0000218005C00000000021800600000000119
+:1006F00002180064000000030218006800000000F7
+:100700000218006C000000010218007000000004D4
+:1007100002180074000000000218007800000004B5
+:100720000218007C00000003061800800000000290
+:10073000021800A400003FFF021800A8000003FFF9
+:100740000218022400000000021802340000000019
+:100750000218024C00000000021802E4000000FF32
+:100760000618100000000400021B8BC000000001EE
+:10077000021B800000000034021B804000000018B3
+:10078000021B80800000000C021B80C000000020C3
+:100790000C1B83000007A1200A1B83000000013806
+:1007A0000B1B830000001388021B83C0000001F4B0
+:1007B000021B1480000000010A1B148000000000CE
+:1007C000061A1000000002B3041A1ACC0001022716
+:1007D000061AA020000000C8061AA00000000002AF
+:1007E000021A1AD000000000061A1AD800000004ED
+:1007F000061A367800000006061A3670000000025D
+:10080000061A500000000002061A500800000004FA
+:10081000061A501800000004061A502800000004B0
+:10082000061A503800000004061A50480000000460
+:10083000061A505800000004061A50680000000410
+:10084000061A507800000002061A4000000000025C
+:10085000061A400800000002041A62C000200228A4
+:10086000061A20000000016C061AB00000000028E3
+:10087000061AB1400000000C061A32C00000001237
+:10088000061A335000000064061A810800000002B6
+:10089000061A25B00000016C061AB0A0000000285E
+:1008A000061AB1700000000C061A3308000000128E
+:1008B000061A34E000000064061A811000000002ED
+:1008C000021A2B6000000000061A3000000000022F
+:1008D000041A300800050248061A301C0000000700
+:1008E000061A31C000000008061A5000000000027D
+:1008F000061A508000000012061A40000000000294
+:10090000021A2B6400000000061A303800000002B2
+:10091000041A30400005024D061A3054000000074A
+:10092000061A31E000000008061A5010000000020C
+:10093000061A50C800000012061A40080000000203
+:10094000021A2B6800000000061A30700000000236
+:10095000041A307800050252061A308C0000000795
+:10096000061A320000000008061A5020000000029B
+:10097000061A511000000012041A4010000202571B
+:10098000021A2B6C00000000061A30A800000002BA
+:10099000041A30B000050259061A30C400000007DE
+:1009A000061A322000000008061A5030000000022B
+:1009B000061A515800000012041A40180002025E84
+:1009C000021A2B7000000000061A30E0000000023E
+:1009D000041A30E800050260061A30FC0000000727
+:1009E000061A324000000008061A504000000002BB
+:1009F000061A51A000000012041A402000020265ED
+:100A0000021A2B7400000000061A311800000002C0
+:100A1000041A312000050267061A3134000000076D
+:100A2000061A326000000008061A5050000000024A
+:100A3000061A51E800000012041A40280002026C55
+:100A4000021A2B7800000000061A31500000000244
+:100A5000041A31580005026E061A316C00000007B6
+:100A6000061A328000000008061A506000000002DA
+:100A7000061A523000000012041A403000020273BD
+:100A8000021A2B7C00000000061A318800000002C8
+:100A9000041A319000050275061A31A400000007FF
+:100AA000061A32A000000008061A5070000000026A
+:100AB000061A527800000012041A40380002027A26
+:100AC0000200A294071D29110200A2980000000054
+:100AD0000200A29C009C04240200A2A000000000CE
+:100AE0000200A2A4000002090200A270000000009F
+:100AF0000200A274000000000200A27000000000CA
+:100B00000200A274000000000200A27000000000B9
+:100B10000200A274000000000200A27000000000A9
+:100B20000200A27400000000020100B400000001F5
+:100B3000020100B800000001020100DC0000000119
+:100B40000201010000000001020101040000000197
+:100B50000201007C00300000020100840000002837
+:100B60000201008C000000000201013000000004BE
+:100B70000201025C000000010201032800000000E5
+:100B800002016080000000010201055400000030F5
+:100B9000020100C400000001020100CC00000001BD
+:100BA000020100F800000001020100F00000000155
+:100BB00002010080003000000201008800000028CF
+:100BC0000201009000000000020101340000000456
+:100BD000020102DC000000010201032C0000000001
+:100BE0000201608400000001020105640000003081
+:100BF000020100C800000001020100D00000000155
+:100C0000020100FC00000001020100F400000001EC
+:100C1000020C100000000020020C2008000002114D
+:100C2000020C200C00000200020C20100000020444
+:100C3000020C201C0000FFFF020C20200000FFFF20
+:100C4000020C20240000FFFF020C20280000FFFF00
+:100C5000020C2038000000C6020C203C00000000FE
+:100C6000020C204000000034020C2044000000353B
+:100C7000060C20480000001C020C20B800000001F7
+:100C8000060C20BC0000005F020C223807FFFFFFAB
+:100C9000020C223C0000003F020C224007FFFFFF35
+:100CA000020C22440000000F010C2248000000004A
+:100CB000010C224C00000000010C2250000000003A
+:100CC000010C225400000000010C2258000000001A
+:100CD000010C225C00000000010C226000000000FA
+:100CE000010C226400000000010C226800000000DA
+:100CF000010C226C00000000010C227000000000BA
+:100D0000010C227400000000010C22780000000099
+:100D1000010C227C000000000C0C2000000003E805
+:100D20000A0C2000000000010B0C20000000000A4B
+:100D3000020C400800000411020C400C00000400EA
+:100D4000020C401000000404020C401400000421B6
+:100D5000020C401C0000FFFF020C40200000FFFFBF
+:100D6000020C40240000FFFF020C40280000FFFF9F
+:100D7000020C403800000046020C403C0000000518
+:100D8000020C404000000034020C404400000035DA
+:100D9000020C404800000007060C404C0000005BBD
+:100DA000020C41B800000001060C41BC0000000329
+:100DB000020C41C800000001060C41CC0000001BE1
+:100DC000020C423807FFFFFF020C423C0000003FCC
+:100DD000020C424007FFFFFF020C42440000000FDC
+:100DE000010C424800000000010C424C00000000D1
+:100DF000010C425000000000010C425400000000B1
+:100E0000010C425800000000010C425C0000000090
+:100E1000010C426000000000010C42640000000070
+:100E2000010C426800000000010C426C0000000050
+:100E3000010C427000000000010C42740000000030
+:100E4000010C427800000000010C427C0000000010
+:100E5000010C4280000000000C0C4000000003E880
+:100E60000A0C4000000000010B0C40000000000ACA
+:100E7000020D004400000032020D008C021500201B
+:100E8000020D009002150020020D009408100000D1
+:100E9000020D009800000033020D009C00000002CB
+:100EA000020D00A000000000020D00A400000005DB
+:100EB000020D00A800000005060D00AC00000002B5
+:100EC000020D00B400000002020D00B80000000393
+:100ED000020D00BC00000002020D00C00000000175
+:100EE000020D00C800000002020D00CC000000024C
+:100EF000020D010800000001020D015C000000016C
+:100F0000020D016400000001020D016800000002F2
+:100F1000020D020400000001020D020C000000207E
+:100F2000020D021000000040020D021400000040FB
+:100F3000020D022000000003020D02240000001830
+:100F4000060D028000000012040D03000024027C44
+:100F5000020D004C00000001020D005000000002D4
+:100F6000020D005400000008020D005800000008A7
+:100F7000060D005C00000004020D00C40000000427
+:100F8000020D000400000001020D00080000000135
+:100F9000020D000C00000001020D00100000000115
+:100FA000020D001400000001020D001800000001F5
+:100FB000020D001C00000001020D002000000001D5
+:100FC000020D002400000001020D002800000001B5
+:100FD000020D002C00000001020D00300000000195
+:100FE000020D003400000001020D00380000000175
+:100FF000020D003C00000001020D01140000000978
+:10100000020D011C0000000A020D0124000000076F
+:10101000020D012C00000007020D01340000000C3D
+:10102000020D013C0000000B020D0144000000070E
+:10103000020D011800000029020D01200000002A05
+:10104000020D012800000027020D013000000027DA
+:10105000020D01380000002C020D01400000002BA1
+:10106000020D014800000027020D011400000019C4
+:10107000020D011C0000001A020D012400000017DF
+:10108000020D012C00000017020D01340000001CAD
+:10109000020D013C0000001B020D0144000000177E
+:1010A000020D011800000039020D01200000003A75
+:1010B000020D012800000037020D0130000000374A
+:1010C000020D01380000003C020D01400000003B11
+:1010D000020D014800000037020D01140000004914
+:1010E000020D011C0000004A020D0124000000470F
+:1010F000020D012C00000047020D01340000004CDD
+:10110000020D013C0000004B020D014400000047AD
+:10111000020D011800000069020D01200000006AA4
+:10112000020D012800000067020D01300000006779
+:10113000020D01380000006C020D01400000006B40
+:10114000020D014800000067020D01140000005963
+:10115000020D011C0000005A020D0124000000577E
+:10116000020D012C00000057020D01340000005C4C
+:10117000020D013C0000005B020D0144000000571D
+:10118000020D011800000079020D01200000007A14
+:10119000020D012800000077020D013000000077E9
+:1011A000020D01380000007C020D01400000007BB0
+:1011B000020D014800000077020E004C00000032D2
+:1011C000020E009402150020020E00980215002065
+:1011D000020E009C00000030020E00A0081000006B
+:1011E000020E00A400000033020E00A80000003030
+:1011F000020E00AC00000031020E00B00000000240
+:10120000020E00B400000004020E00B8000000004E
+:10121000020E00BC00000002020E00C0000000022E
+:10122000020E00C400000000020E00C80000000210
+:10123000020E00CC00000007020E00D000000002E9
+:10124000020E00D400000002020E00D800000001CF
+:10125000020E00E400000001020E01440000000143
+:10126000020E014C00000001020E015000000002BD
+:10127000020E020400000001020E020C00000040F9
+:10128000020E021000000040020E021C00000004CA
+:10129000020E022000000020020E02240000000EB8
+:1012A000020E02280000001B060E030000000012C0
+:1012B000040E0280001B02A0020E00540000001069
+:1012C000020E005800000007020E005C0000000F34
+:1012D000020E006000000010020E00640000000B0F
+:1012E000060E006800000003020E00DC0000000390
+:1012F000020E000400000001020E000800000001C0
+:10130000020E000C00000001020E0010000000019F
+:10131000020E001400000001020E0018000000017F
+:10132000020E001C00000001020E0020000000015F
+:10133000020E002400000001020E0028000000013F
+:10134000020E002C00000001020E0030000000011F
+:10135000020E003400000001020E003800000001FF
+:10136000020E003C00000001020E004000000001DF
+:10137000020E004400000001020E01100000000FE8
+:10138000020E01180000000E020E012000000000F5
+:10139000020E012800000000020E01140000002FC0
+:1013A000020E011C0000002E020E012400000000AD
+:1013B000020E012C00000000020E01100000001FB0
+:1013C000020E01180000001E020E012000000000A5
+:1013D000020E012800000000020E01140000003F70
+:1013E000020E011C0000003E020E0124000000005D
+:1013F000020E012C00000000020E01100000004F40
+:10140000020E01180000004E020E01200000000034
+:10141000020E012800000000020E01140000006FFF
+:10142000020E011C0000006E020E012400000000EC
+:10143000020E012C00000000020E01100000005FEF
+:10144000020E01180000005E020E012000000000E4
+:10145000020E012800000000020E01140000007FAF
+:10146000020E011C0000007E020E0124000000009C
+:10147000020E012C000000000730040000D2000022
+:10148000083007A8000B02BB0734000031B600008B
+:101490000734800036500C6E0735000037591A03A8
+:1014A00007358000286127DA0835FF40401802BD63
+:1014B00001300000000000000130000400000000C6
+:1014C00001300008000000000130000C00000000A6
+:1014D0000130001000000000013000140000000086
+:1014E0000230002000000001023000240000000251
+:1014F00002300028000000030230002C0000000031
+:10150000023000300000000402300034000000010E
+:1015100002300038000000000230003C00000001F2
+:1015200002300040000000040230004400000000CF
+:1015300002300048000000010230004C00000003AF
+:101540000230005000000000023000540000000192
+:1015500002300058000000040230005C000000006F
+:10156000023000600000000102300064000000034F
+:1015700002300068000000000230006C0000000132
+:10158000023000700000000402300074000000000F
+:1015900002300078000000040230007C00000003EC
+:1015A0000630008000000002023000A400003FFF6F
+:1015B000023000A8000003FF0230022400000000F7
+:1015C00002300234000000000230024C0000000033
+:1015D000023002E40000FFFF063020000000080097
+:1015E00002338BC000000001023380000000001AAB
+:1015F000023380400000004E023380800000001063
+:10160000023380C0000000200C3383000007A120BB
+:101610000A338300000001380B3383000000138875
+:10162000023383C0000001F40C3383801DCD6500BC
+:101630000A3383800004C4B40B338380004C4B40D6
+:101640000A331480000000000233148000000001FF
+:10165000063220000000010206328980000000C826
+:1016600006328960000000020632322800000004C1
+:10167000063232000000000904323224000102BFA9
+:1016800006323180000000200632500000000400C5
+:10169000063240000000000204324008000102C08F
+:1016A0000632400C0000000306326B6800000002A6
+:1016B00004326B70000202C106326B10000000029F
+:1016C000043274C0000202C30233080001000000AB
+:1016D00004330C00001002C50233080000000000B3
+:1016E00004330C40001002D506329000000000A028
+:1016F0000632950000000040063297000000003CD2
+:1017000006322450000000B406322AD00000000245
+:101710000632308000000020063280000000012CDC
+:101720000232323800000000063250000000002073
+:101730000632510000000020063252000000002056
+:101740000632530000000020063254000000002042
+:10175000063255000000002006325600000000202E
+:10176000063257000000002006325800000000201A
+:10177000063259000000002006325A000000002006
+:1017800006325B000000002006325C0000000020F2
+:1017900006325D000000002006325E0000000020DE
+:1017A00006325F000000002006326B780000005215
+:1017B00006326E080000000C06329280000000A085
+:1017C0000632960000000040063297F00000003C10
+:1017D00006322720000000B406322AD8000000029A
+:1017E0000632310000000020063284B00000012CD7
+:1017F0000232323C0000000006325080000000201F
+:101800000632518000000020063252800000002085
+:101810000632538000000020063254800000002071
+:10182000063255800000002006325680000000205D
+:101830000632578000000020063258800000002049
+:10184000063259800000002006325A800000002035
+:1018500006325B800000002006325C800000002021
+:1018600006325D800000002006325E80000000200D
+:1018700006325F800000002006326CC0000000527B
+:1018800006326E380000000C02322A3000000000E0
+:10189000063230000000000406324018000000024A
+:1018A00002322A340000000006323010000000042A
+:1018B000063240280000000202322A3800000000F0
+:1018C00006323020000000040632403800000002DA
+:1018D00002322A3C000000000632303000000004D2
+:1018E000063240480000000202322A400000000098
+:1018F000063230400000000406324058000000026A
+:1019000002322A4400000000063230500000000479
+:10191000063240680000000202322A48000000003F
+:1019200006323060000000040632407800000002F9
+:1019300002322A4C00000000063230700000000421
+:1019400006324088000000020720040000740000F6
+:1019500008200780001002E507240000322600005E
+:1019600007248000246E0C8A0824CBB064F002E7C0
+:101970000120000000000000012000040000000021
+:1019800001200008000000000120000C0000000001
+:1019900001200010000000000120001400000000E1
+:1019A00002200020000000010220002400000002AC
+:1019B00002200028000000030220002C000000008C
+:1019C000022000300000000402200034000000016A
+:1019D00002200038000000000220003C000000014E
+:1019E000022000400000000402200044000000002B
+:1019F00002200048000000010220004C000000030B
+:101A000002200050000000000220005400000001ED
+:101A100002200058000000040220005C00000000CA
+:101A200002200060000000010220006400000003AA
+:101A300002200068000000000220006C000000018D
+:101A4000022000700000000402200074000000006A
+:101A500002200078000000040220007C0000000347
+:101A60000620008000000002022000A400003FFFCA
+:101A7000022000A8000003FF022002240000000052
+:101A800002200234000000000220024C000000008E
+:101A9000022002E40000FFFF0620200000000800F2
+:101AA00002238BC000000001022380000000001010
+:101AB00002238040000000120223808000000030DA
+:101AC000022380C00000000E022383C0000001F446
+:101AD00002231480000000010A231480000000008B
+:101AE000062210000000004206227020000000C8FC
+:101AF0000622700000000002022211E8000000002F
+:101B000006223000000000C0062240700000008065
+:101B10000622528000000004062267000000010037
+:101B2000062290000000040004226B08002002E955
+:101B300002230800013FFFFF04230C0000100309EB
+:101B4000022308000000000004230C4000100319C9
+:101B500006228000000000A0062285000000004050
+:101B6000062287000000003C0622404000000006DC
+:101B700006228280000000A00622860000000040AD
+:101B8000062287F00000003C0622405800000006B4
+:101B9000022211480000000006223300000000026B
+:101BA00006226040000000300222114C00000000BC
+:101BB0000622330800000002062261000000003007
+:101BC0000222115000000000062233100000000223
+:101BD000062261C000000030022211540000000003
+:101BE0000622331800000002062262800000003046
+:101BF00002221158000000000622332000000002DB
+:101C000006226340000000300222115C0000000048
+:101C10000622332800000002062264000000003083
+:101C20000222116000000000062233300000000292
+:101C3000062264C00000003002221164000000008F
+:101C400006223338000000020622658000000030C2
+:101C50000216100000000020021700080000000219
+:101C60000217002C000000030217003C00000004D3
+:101C7000021700440000000802170048000000029C
+:101C80000217004C00000090021700500000009066
+:101C9000021700540080009002170058081400003A
+:101CA000021700600000008A021700640000008034
+:101CB00002170068000000900217006C000000800E
+:101CC000021700700000000602170078000007D01D
+:101CD0000217007C0000076C02170038007C10041B
+:101CE000021700040000000F061640240000000246
+:101CF000021640700000001C02164208000000019D
+:101D000002164210000000010216422000000001ED
+:101D100002164228000000010216423000000001B5
+:101D20000216423800000001021642600000000264
+:101D30000C16401C0003D0900A16401C0000009CAA
+:101D40000B16401C000009C40216403000000008B9
+:101D5000021640340000000C02164038000000104B
+:101D6000021640440000002002164000000000015E
+:101D7000021640D8000000010216400800000001D1
+:101D80000216400C00000001021640100000000185
+:101D90000216424000000000021642480000000007
+:101DA00006164270000000020216425000000000B9
+:101DB0000216425800000000061642800000000291
+:101DC00002166008000004240216600C00000410D3
+:101DD00002166010000004140216601C0000FFFFD1
+:101DE000021660200000FFFF021660240000FFFFC3
+:101DF000021660280000FFFF021660380000002075
+:101E00000216603C00000020021660400000003412
+:101E100002166044000000350216604800000023EE
+:101E20000216604C000000240216605000000025DD
+:101E300002166054000000260216605800000027B9
+:101E40000216605C00000029021660600000002A93
+:101E5000021660640000002B021660680000002C6F
+:101E60000216606C0000002D061660700000005223
+:101E7000021661B800000001061661BC0000001FD8
+:101E80000216623807FFFFFF0216623C0000003FA7
+:101E90000216624007FFFFFF021662440000000FB7
+:101EA00001166248000000000116624C00000000AC
+:101EB000011662500000000001166254000000008C
+:101EC00001166258000000000116625C000000006C
+:101ED000011662600000000001166264000000004C
+:101EE00001166268000000000116626C000000002C
+:101EF000011662700000000001166274000000000C
+:101F000001166278000000000116627C00000000EB
+:101F10000C166000000003E80A16600000000001D3
+:101F20000B1660000000000A021680400000000648
+:101F30000216804400000005021680480000000AD6
+:101F40000216804C000000050216805400000002BA
+:101F5000021680CC00000004021680D000000004AD
+:101F6000021680D400000004021680D8000000048D
+:101F7000021680DC00000004021680E0000000046D
+:101F8000021680E400000004021680E8000000044D
+:101F90000216880400000004021680300000007C55
+:101FA000021680340000003D021680380000003F19
+:101FB0000216803C0000009C021680F00000000722
+:101FC000061680F4000000050216880C01010101CC
+:101FD00002168108000000000216810C00000004B7
+:101FE0000216811000000004021681140000000295
+:101FF000021688100801200402168118000000054E
+:102000000216811C00000005021681200000000558
+:1020100002168124000000050216882C20081001F9
+:1020200002168128000000080216812C000000061C
+:102030000216813000000007021681340000000003
+:1020400002168830010101200616813800000004C4
+:1020500002168834010101010216814800000000C7
+:102060000216814C0000000402168150000000049A
+:10207000021681540000000202168838080120046C
+:1020800002168158000000050216815C0000000560
+:102090000216816000000005021681640000000540
+:1020A0000216883C20081001021681680000000812
+:1020B0000216816C00000006021681700000000705
+:1020C00002168174000000010216884001010120FF
+:1020D00002168178000000010216817C00000001D8
+:1020E00002168180000000010216818400000001B8
+:1020F00002168844010101010216818800000001D6
+:102100000216818C00000004021681900000000479
+:10211000021681940000000202168848080120047B
+:1021200002168198000000050216819C000000053F
+:10213000021681A000000005021681A4000000051F
+:102140000216881420081001021681A80000000859
+:10215000021681AC00000006021681B000000007E4
+:10216000021681B400000001021688180101012046
+:10217000021681B800000001021681BC00000001B7
+:10218000021681C000000001021681C40000000197
+:102190000216881C01010101021681C8000000011D
+:1021A000021681CC00000004021681D00000000459
+:1021B000021681D4000000020216882008012004C3
+:1021C000021681D800000005021681DC000000051F
+:1021D000021681E000000005021681E400000005FF
+:1021E0000216882420081001021681E80000000869
+:1021F000021681EC00000006021681F000000007C4
+:102200000216E40C000000000216882801010120DB
+:102210000616E410000000040216E00001010101AE
+:102220000216E420000000000216E424000000046E
+:102230000216E428000000040216E42C000000024C
+:102240000216E004080120040216E4300000000534
+:102250000216E434000000050216E4380000000510
+:102260000216E43C000000050216E00820081001F8
+:102270000216E440000000080216E44400000006D4
+:102280000216E448000000070216E44C00000000BB
+:102290000216E00C010101200616E45000000004C3
+:1022A0000216E010010101010216E46000000000C6
+:1022B0000216E464000000040216E4680000000452
+:1022C0000216E46C000000020216E014080120046B
+:1022D0000216E470000000050216E4740000000518
+:1022E0000216E478000000050216E47C00000005F8
+:1022F0000216E018200810010216E4800000000811
+:102300000216E484000000060216E48800000007BC
+:102310000216E48C000000010216E01C01010120FD
+:102320000216E490000000010216E494000000018F
+:102330000216E498000000010216E49C000000016F
+:102340000216E020010101010216E4A000000001D4
+:102350000216E4A4000000040216E4A80000000431
+:102360000216E4AC000000020216E024080120047A
+:102370000216E4B0000000050216E4B400000005F7
+:102380000216E4B8000000050216E4BC00000005D7
+:102390000216E028200810010216E4C00000000820
+:1023A0000216E4C4000000060216E4C8000000079C
+:1023B0000216E4CC000000010216E02C010101200D
+:1023C0000216E4D0000000010216E4D4000000016F
+:1023D0000216E4D8000000010216E4DC000000014F
+:1023E0000216E030010101010216E4E000000001E4
+:1023F0000216E4E4000000040216E4E80000000411
+:102400000216E4EC000000020216E0340801200489
+:102410000216E4F0000000050216E4F400000005D6
+:102420000216E4F8000000050216E4FC00000005B6
+:102430000216E038200810010216E500000000082E
+:102440000216E504000000060216E5080000000779
+:102450000216E03C0101012002168240003F003FCD
+:1024600002168244000000000216E524003F003FEF
+:102470000216E52800000000021682480000000055
+:102480000216824C003F003F0216E52C00000000BF
+:102490000216E530003F003F0216825001000100A5
+:1024A00002168254010001000216E5340100010009
+:1024B0000216E538010001000616825800000002ED
+:1024C0000216E53C000000000216E5400000000096
+:1024D0000216826000C000C00216826400C000C004
+:1024E0000216E54400C000C00216E54800C000C066
+:1024F000021682681E001E000216826C1E001E005C
+:102500000216E54C1E001E000216E5501E001E00BD
+:1025100002168270400040000216827440004000A3
+:102520000216E554400040000216E5584000400005
+:1025300002168278800080000216827C8000800073
+:102540000216E55C800080000216E56080008000D5
+:1025500002168280200020000216828420002000C3
+:102560000216E564200020000216E5682000200025
+:1025700006168288000000020216E56C00000000CA
+:102580000216E570000000000216829000000000B4
+:1025900002168294000000000216E574000000009C
+:1025A0000216E57800000000021682980000000084
+:1025B0000216829C000000000216E57C000000006C
+:1025C0000216E58000000000021682A00000000054
+:1025D000021682A400000001061682A80000000A6C
+:1025E000021681F400000C08021681F80000004079
+:1025F000021681FC0000010002168200000000208B
+:1026000002168204000000170216820800000080F3
+:102610000216820C00000200021682100000000068
+:102620000216821801FF01FF0216821401FF01FF4A
+:102630000216E51001FF01FF0216E50C01FF01FF84
+:102640000216823C00000013021680900000013F39
+:102650000216806000000140021680640000014004
+:10266000061680680000000202168070000000C09C
+:1026700006168074000000070216809C00000048C7
+:10268000021680A000000048061680A40000000288
+:10269000021680AC00000048061680B0000000075B
+:1026A000021682380000800002168234000025E401
+:1026B0000216809400007FFF0216822000070007A8
+:1026C0000216821C000700070216E5180007000723
+:1026D0000216E51400070007021682280000000019
+:1026E00002168224FFFFFFFF0216E5200000000013
+:1026F0000216E51CFFFFFFFF0216E6BC000000000B
+:102700000216E6C0000000020216E6C40000000146
+:102710000216E6C8000000030216E6CC0000000422
+:102720000216E6D0000000060216E6D400000005FE
+:102730000216E6D800000007021680EC000000FF39
+:1027400002140000000000010214000C000000014F
+:1027500002140040000000010214004400007FFF4A
+:102760000214000C00000000021400000000000031
+:102770000214006C000000000214000400000001BC
+:1027800002140030000000010214000400000000E8
+:102790000214005C000000000214000800000001A8
+:1027A00002140034000000010214000800000000C0
+:1027B0000214006000000000020200580000003215
+:1027C000020200A003150020020200A4031500204D
+:1027D000020200A801000030020200AC0810000054
+:1027E000020200B000000033020200B4000000301A
+:1027F000020200B800000031020200BC0000000329
+:10280000020200C000000006020200C40000000333
+:10281000020200C800000003020200CC0000000217
+:10282000020200D000000000020200D400000002FA
+:10283000020200DC00000000020200E000000006CE
+:10284000020200E400000004020200E800000002AE
+:10285000020200EC00000002020200F00000000191
+:10286000020200FC0000000602020120000000003D
+:102870000202013400000002020201B00000000167
+:102880000202020C0000000102020214000000011A
+:10289000020202180000000202020404000000010B
+:1028A0000202040C0000004002020410000000407C
+:1028B0000202041C000000040202042000000020A8
+:1028C000020204240000000202020428000000208A
+:1028D000060205000000001204020480001F032904
+:1028E000020200600000000F020200640000000706
+:1028F000020200680000000B0202006C0000000EE3
+:10290000020200700000000E0602007400000003C6
+:10291000020200F4000000040202000400000001B2
+:1029200002020008000000010202000C0000000189
+:102930000202001000000001020200140000000169
+:1029400002020018000000010202001C0000000149
+:102950000202002000000001020200240000000129
+:1029600002020028000000010202002C0000000109
+:1029700002020030000000010202003400000001E9
+:1029800002020038000000010202003C00000001C9
+:1029900002020040000000010202004400000001A9
+:1029A00002020048000000010202004C0000000189
+:1029B000020200500000000102020108000000C8ED
+:1029C0000202011800000002020201C4000000001F
+:1029D000020201CC00000000020201D4000000024B
+:1029E000020201DC00000002020201E4000000FF1C
+:1029F000020201EC000000FF0202010000000000E2
+:102A00000202010C000000C80202011C00000002CA
+:102A1000020201C800000000020201D00000000014
+:102A2000020201D800000002020201E000000002E0
+:102A3000020201E8000000FF020201F0000000FFB6
+:102A4000020201040000000002020108000000C8A8
+:102A50000202011800000002020201C4000000008E
+:102A6000020201CC00000000020201D400000002BA
+:102A7000020201DC00000002020201E4000000FF8B
+:102A8000020201EC000000FF020201000000000051
+:102A90000202010C000000C80202011C000000023A
+:102AA000020201C800000000020201D00000000084
+:102AB000020201D800000002020201E00000000250
+:102AC000020201E8000000FF020201F0000000FF26
+:102AD000020201040000000002020108000000C818
+:102AE0000202011800000002020201C400000000FE
+:102AF000020201CC00000000020201D4000000022A
+:102B0000020201DC00000002020201E4000000FFFA
+:102B1000020201EC000000FF0202010000000000C0
+:102B20000202010C000000C80202011C00000002A9
+:102B3000020201C800000000020201D000000000F3
+:102B4000020201D800000002020201E000000002BF
+:102B5000020201E8000000FF020201F0000000FF95
+:102B6000020201040000000002020108000000C887
+:102B70000202011800000002020201C4000000006D
+:102B8000020201CC00000000020201D40000000299
+:102B9000020201DC00000002020201E4000000FF6A
+:102BA000020201EC000000FF020201000000000030
+:102BB0000202010C000000C80202011C0000000219
+:102BC000020201C800000000020201D00000000063
+:102BD000020201D800000002020201E0000000022F
+:102BE000020201E8000000FF020201F0000000FF05
+:102BF00002020104000000000728040000BD0000DC
+:102C0000082807A8000B0348072C00003406000022
+:102C1000072C800037960D02072D00003BC31AE8F1
+:102C2000072D8000382629D9072E0000124537E3EA
+:102C3000082E22203BBC034A0128000000000000AF
+:102C40000128000400000000012800080000000026
+:102C50000128000C00000000012800100000000006
+:102C600001280014000000000228002000000001DC
+:102C700002280024000000020228002800000003AF
+:102C80000228002C00000000022800300000000490
+:102C90000228003400000001022800380000000073
+:102CA0000228003C0000000102280040000000044F
+:102CB0000228004400000000022800480000000133
+:102CC0000228004C00000003022800500000000011
+:102CD00002280054000000010228005800000004EF
+:102CE0000228005C000000000228006000000001D3
+:102CF00002280064000000030228006800000000B1
+:102D00000228006C0000000102280070000000048E
+:102D1000022800740000000002280078000000046F
+:102D20000228007C0000000306280080000000024A
+:102D3000022800A400003FFF022800A8000003FFB3
+:102D400002280224000000000228023400000000D3
+:102D50000228024C00000000022802E40000FFFFED
+:102D60000628200000000800022B8BC00000000194
+:102D7000022B800000000000022B804000000018A1
+:102D8000022B80800000000C022B80C00000006637
+:102D90000C2B83000007A1200A2B830000000138C0
+:102DA0000B2B830000001388022B83C0000001F46A
+:102DB0000C2B8340000001F40A2B8340000000002C
+:102DC0000B2B8340000000050A2B83800004C4B451
+:102DD0000C2B83801DCD65000A2B148000000000A1
+:102DE0000B2B8380004C4B40022B14800000000111
+:102DF000062A29C800000004042A29D80002034C2E
+:102E0000062A208000000048062A9020000000C802
+:102E1000062A900000000002062A21A80000008671
+:102E2000062A200000000020022A23C8000000001B
+:102E3000042A23D00002034E042A249800040350DD
+:102E4000022A2C2000000000022A2C1000000000A2
+:102E5000042A2C0800020354022A3010000000014A
+:102E6000062A404000000010042A400000100356CB
+:102E7000062A6AC000000002062A6B000000000457
+:102E8000042A840800020366022B080000000000E8
+:102E9000042B0C0000100368022B08000100000046
+:102EA000042B0C4000080378022B080002000000ED
+:102EB000042B0C6000080380062AC000000000FC00
+:102EC000062A24A800000014062A25480000002431
+:102ED000062A266800000024062A2788000000240D
+:102EE000062A28A800000024062AA00000000028C6
+:102EF000062AA1400000000C042A29E000020388F1
+:102F0000022A300000000001062A502000000002C2
+:102F1000062A503000000002062A5000000000027D
+:102F2000062A501000000002022A52080000000188
+:102F3000042A6AC80002038A062A6B1000000042B5
+:102F4000062A6D2000000004062AC3F0000000FCE1
+:102F5000062A24F800000014062A25D800000024C0
+:102F6000062A26F800000024062A2818000000245B
+:102F7000062A293800000024062AA0A00000002804
+:102F8000062AA1700000000C042A29E80002038C24
+:102F9000022A300400000001062A50280000000226
+:102FA000062A503800000002062A500800000002DD
+:102FB000062A501800000002022A520C00000001EC
+:102FC000042A6AD00002038E062A6C180000004210
+:102FD000062A6D3000000004022AC7E0000000004D
+:102FE000042A29F000100390062A50480000000E21
+:102FF000022AC7E400000000042A2A30001003A0BF
+:10300000062A50800000000E022AC7E800000000D7
+:10301000042A2A70001003B0062A50B80000000EDF
+:10302000022AC7EC00000000042A2AB0001003C0E6
+:10303000062A50F00000000E022AC7F0000000002F
+:10304000042A2AF0001003D0062A51280000000E9E
+:10305000022AC7F400000000042A2B30001003E00D
+:10306000062A51600000000E022AC7F80000000086
+:10307000042A2B70001003F0062A51980000000E5D
+:10308000022AC7FC00000000042A2BB00010040034
+:10309000062A51D00000000E0210100800000001A6
+:1030A0000210105000000001021010000003D000B8
+:1030B000021010040000003D091018000200041066
+:1030C0000910110000280610061011A000000018B9
+:1030D00006102400000000E00210201C0000000088
+:1030E0000210202000000001021020C00000000299
+:1030F000021020040000000102102008000000015E
+:1031000009103C0000050638091038000005063D8E
+:10311000091038200005064206104C00000001008E
+:1031200002104028000000100210404400003FFF41
+:103130000210405800280000021040840084924A87
+:1031400002104058000000000210800000001080B3
+:10315000021080AC00000000021080380000001057
+:103160000210810000000000061081200000000213
+:1031700002108008000002B502108010000000005C
+:10318000061082000000004A021081080001FFFFC3
+:1031900006108140000000020210800000001A802A
+:1031A0000610900000000024061091200000004A44
+:1031B000061093700000004A061095C00000004AF7
+:1031C0000210800400001080021080B00000000196
+:1031D0000210803C0000001002108104000000007A
+:1031E00006108128000000020210800C000002B5C9
+:1031F0000210801400000000061084000000004A45
+:103200000210810C0001FFFF06108148000000023F
+:103210000210800400001A80061090900000002424
+:10322000061092480000004A061094980000004AD8
+:10323000061096E80000004A02108000000010808E
+:10324000021080AC00000002021080380000001064
+:103250000210810000000000061081200000000222
+:1032600002108008000002B502108010000000006B
+:10327000061082000000004A021081080001FFFFD2
+:1032800006108140000000020210800000001A8039
+:103290000610900000000024061091200000004A53
+:1032A000061093700000004A061095C00000004A06
+:1032B0000210800400001080021080B000000003A3
+:1032C0000210803C00000010021081040000000089
+:1032D00006108128000000020210800C000002B5D8
+:1032E0000210801400000000061084000000004A54
+:1032F0000210810C0001FFFF06108148000000024F
+:103300000210800400001A80061090900000002433
+:10331000061092480000004A061094980000004AE7
+:10332000061096E80000004A02108000000010809D
+:10333000021080AC00000004021080380000001071
+:103340000210810000000000061081200000000231
+:1033500002108008000002B502108010000000007A
+:10336000061082000000004A021081080001FFFFE1
+:1033700006108140000000020210800000001A8048
+:103380000610900000000024061091200000004A62
+:10339000061093700000004A061095C00000004A15
+:1033A0000210800400001080021080B000000005B0
+:1033B0000210803C00000010021081040000000098
+:1033C00006108128000000020210800C000002B5E7
+:1033D0000210801400000000061084000000004A63
+:1033E0000210810C0001FFFF06108148000000025E
+:1033F0000210800400001A80061090900000002443
+:10340000061092480000004A061094980000004AF6
+:10341000061096E80000004A0210800000001080AC
+:10342000021080AC0000000602108038000000107E
+:103430000210810000000000061081200000000240
+:1034400002108008000002B5021080100000000089
+:10345000061082000000004A021081080001FFFFF0
+:1034600006108140000000020210800000001A8057
+:103470000610900000000024061091200000004A71
+:10348000061093700000004A061095C00000004A24
+:103490000210800400001080021080B000000007BD
+:1034A0000210803C000000100210810400000000A7
+:1034B00006108128000000020210800C000002B5F6
+:1034C0000210801400000000061084000000004A72
+:1034D0000210810C0001FFFF06108148000000026D
+:1034E0000210800400001A80061090900000002452
+:1034F000061092480000004A061094980000004A06
+:10350000061096E80000004A021205B00000000113
+:103510000212049000E383400212051400003C10E4
+:103520000212066C0000000102120670000000008A
+:1035300002120494FFFFFFFF02120498FFFFFFFF37
+:103540000212049CFFFFFFFF021204A0FFFFFFFF17
+:10355000021204A4FFFFFFFF021204A8FFFFFFFFF7
+:10356000021204ACFFFFFFFF021204B0FFFFFFFFD7
+:10357000021204BCFFFFFFFF021204C0FFFFFFFFA7
+:10358000021204C4FFFFFFFF021204C8FFFFFFFF87
+:10359000021204CCFFFFFFFF021204D0FFFFFFFF67
+:1035A000021204D8FFFFFFFF021204DCFFFFFFFF3F
+:1035B000021204E0FFFFFFFF021204E4FFFFFFFF1F
+:1035C000021204E8FFFFFFFF021204ECFFFFFFFFFF
+:1035D000021204F0FFFFFFFF021204F4FFFFFFFFDF
+:1035E000021204F8FFFFFFFF021204FCFFFFFFFFBF
+:1035F00002120500FFFFFFFF02120504FFFFFFFF9D
+:1036000002120508FFFFFFFF0212050CFFFFFFFF7C
+:1036100002120510FFFFFFFF021204D4FF802000FA
+:10362000021204B4F0005000021204B8F00080004E
+:1036300002120390000000080212039C0000000820
+:10364000021203A000000008021203A400000002FE
+:10365000021203BC00000004021203C000000005B7
+:10366000021203C400000004021203D00000000094
+:103670000212036C00000001021203680000003F08
+:10368000021201BC00000040021201C00000180834
+:10369000021201C400000803021201C8000008035E
+:1036A000021201CC00000040021201D00000000311
+:1036B000021201D400000803021201D8000008031E
+:1036C000021201DC00000803021201E00001000305
+:1036D000021201E400000803021201E800000803DE
+:1036E000021201EC00000003021201F000000003CE
+:1036F000021201F400000003021201F800000003AE
+:10370000021201FC0000000302120200000000038C
+:10371000021202040000000302120208000000036B
+:103720000212020C0000000302120210000000034B
+:10373000021202140000000302120218000000032B
+:103740000212021C0000000302120220000000030B
+:1037500002120224000000030212022800002403C7
+:103760000212022C0000002F021202300000000999
+:103770000212023400000019021202380000018413
+:103780000212023C00000183021202400000030604
+:103790000212024400000019021202480000000652
+:1037A0000212024C0000030602120250000003063F
+:1037B00002120254000003060212025800000C8696
+:1037C0000212025C000003060212026000000306FF
+:1037D00002120264000000060212026800000006E5
+:1037E0000212026C000000060212027000000006C5
+:1037F00002120274000000060212027800000006A5
+:103800000212027C00000006021202800000000684
+:103810000212028400000006021202880000000664
+:103820000212028C00000006021202900000000644
+:103830000212029400000006021202980000000624
+:103840000212029C00000006021202A00000030601
+:10385000021202A400000013021202A800000006D7
+:10386000021202B000001004021202B400001004A0
+:103870000212032400106440021203280010644066
+:10388000021205B400000001021201B000000001A4
+:103890000600A000000000160200A0EC5554000035
+:1038A0000200A0F0555555550200A0F400005555F2
+:1038B0000200A0F8F00000000200A0FC5554000037
+:1038C0000200A100555555550200A10400005555B0
+:1038D0000200A108F00000000200A18C5554000075
+:1038E0000200A190555555550200A1940000555570
+:1038F0000200A198F00000000200A19C000000005E
+:103900000200A1A0000100000200A1A400005014C8
+:103910000200A1A8000000000200A45C00000C004E
+:103920000200A61C000000030200A06CFF5C000067
+:103930000200A070FFF55FFF0200A0740000FFFF0F
+:103940000200A078F00003E00200A07C000000006C
+:103950000200A0800000A0000600A0840000000576
+:103960000200A0980FE000000600A09C00000007E5
+:103970000200A0B8000004000600A0BC0000000384
+:103980000200A0C8000010000600A0CC0000000348
+:103990000200A0D8000040000600A0DC00000003E8
+:1039A0000200A0E8000100000600A22C00000004B4
+:1039B0000200A10CFF5C00000200A110FFF55FFFF8
+:1039C0000200A1140000FFFF0200A118F00003E0B4
+:1039D0000200A11C000000000200A1200000A000C5
+:1039E0000600A124000000050200A1380FE000003D
+:1039F0000600A13C000000070200A15800000800DA
+:103A00000600A15C000000030200A1680000200085
+:103A10000600A16C000000030200A17800008000F5
+:103A20000600A17C000000030200A1880002000043
+:103A30000600A23C0000000400000000000000009E
+:103A40000000003100000000000000000000000045
+:103A50000000000000000000000000000000000066
+:103A600000000000000000000000000000310032F3
+:103A70000000000000000000000000000000000046
+:103A80000000000000000000000000000000000036
+:103A9000000000000000000000320056000000009E
+:103AA0000000000000000000000000000000000016
+:103AB0000000000000000000000000000000000006
+:103AC000000000000056008C000000000000000014
+:103AD000008C009000900094009400980098009C46
+:103AE000009C00A000A000A400A400A800A800ACB6
+:103AF00000AC00B100B100B300B300B5000000009D
+:103B000000000000000000000000000000000000B5
+:103B100000000000000000000000000000B50100EF
+:103B2000010001060106010C010C01140114011C25
+:103B3000011C01240124012C012C01340134013C1D
+:103B4000013C01440144014C000000000000000061
+:103B50000000000000000000000000000000000065
+:103B60000000000000000000000000000000000055
+:103B70000000000000000000000000000000000045
+:103B80000000000000000000000000000000000035
+:103B90000000000000000000000000000000000025
+:103BA0000000000000000000000000000000000015
+:103BB0000000000000000000000000000000000005
+:103BC00000000000000000000000000000000000F5
+:103BD00000000000000000000000000000000000E5
+:103BE00000000000000000000000000000000000D5
+:103BF0000000000000000000014C01510000000026
+:103C000000000000015101520152015301530154BF
+:103C100001540155015501560156015701570158EC
+:103C200001580159000000000000000000000000E1
+:103C30000000000000000000000000000000000084
+:103C40000000000000000000000000000000000074
+:103C50000159015E015E016A016A017600000000FF
+:103C60000000000000000000000000000000000054
+:103C70000000000000000000000000000000000044
+:103C80000000000000000000000000000000000034
+:103C90000000000000000000000000000000000024
+:103CA0000000000000000000017601770000000025
+:103CB0000000000000000000000000000000000004
+:103CC00000000000000000000000000000000000F4
+:103CD000000000000177019A0000000000000000D1
+:103CE00000000000000000000000000000000000D4
+:103CF00000000000000000000000000000000000C4
+:103D0000019A01C200000000000000000000000055
+:103D100000000000000000000000000000000000A3
+:103D200000000000000000000000000001C201F3DC
+:103D3000000000000000000001F301FA01FA020196
+:103D4000020102080208020F020F02160216021DEB
+:103D5000021D02240224022B022B02630000000039
+:103D600000000000026302670267026B026B026FD1
+:103D7000026F0273027302770277027B027B027F7B
+:103D8000027F0283028302D102D102EB02EB030520
+:103D9000030503080308030B030B030E030E0311B3
+:103DA00003110314031403170317031A031A031D43
+:103DB000031D035E035E0362036203660366036919
+:103DC0000369036C036C036F036F03720372037563
+:103DD000037503780378037B037B037E037E037FF5
+:103DE00000000000000000000000000000000000D3
+:103DF00000000000000000000000000000000000C3
+:103E00000000000000000000037F0391000000009C
+:103E100000000000000000000000000000000000A2
+:103E20000000000000000000000000000000000092
+:103E300000000000039103A603A603A903A903AC95
+:103E40000000000000000000000000000000000072
+:103E50000000000000000000000000000000000062
+:103E600003AC03D9000000000000000000000000C7
+:103E70000000000000000000000000000000000042
+:103E800000000000000000000000000003D904DC76
+:103E90000000000000000000000000000000000022
+:103EA0000000000000000000000000000000000012
+:103EB000000000000000000004DC04E304E304E769
+:103EC00004E704EB00000000000000000000000018
+:103ED00000000000000000000000000000000000E2
+:103EE0000000000004EB052B0000000000000000B3
+:103EF000052B05340534053D053D05460546054FB2
+:103F0000054F0558055805610561056A056A057381
+:103F1000057305CB05CB05DD05DD05EF05EF05F2E6
+:103F200005F205F505F505F805F805FB05FB05FEA9
+:103F300005FE060106010604060406070607060E2E
+:103F40000000000000000000000000000000000071
+:103F50000000000000000000000000000000000061
+:103F60000000000000000000060E06140000000023
+:103F70000000000000000000000000000000000041
+:103F80000000000000000000000000000000000031
+:103F900000000000061406170000000000000000EA
+:103FA0000000000000000000000000000000000011
+:103FB0000000000000000000000000000000000001
+:103FC0000617061D000000000000000000000000B1
+:103FD00000000000000000000000000000000000E1
+:103FE00000000000000000000000000000000000D1
+:103FF0000000000000000000061D062C062C063BF9
+:10400000063B064A064A06590659066806680677B8
+:1040100006770686068606950695070600000000C8
+:104020000000000000000000000000000000000090
+:104030000000000000000000000000000000000080
+:1040400000000000070607190719072A072A073B7F
+:104050000000000000000000000000000000000060
+:104060000000000000000000000000000000000050
+:10407000000000000000000000010000000204C079
+:104080000003098000040E4000051300000617C05D
+:1040900000071C800008214000092600000A2AC0F1
+:1040A000000B2F80000C3440000D3900000E3DC085
+:1040B000000F42800010474000114C00001250C019
+:1040C0000013558000145A4000155F00001663C0AD
+:1040D0000017688000186D4000197200001A76C041
+:1040E000001B7B80001C8040001D8500001E89C0D5
+:1040F000001F8E8000209340000020000000400040
+:1041000000006000000080000000A0000000C0006F
+:104110000000E0000001000000012000000140005C
+:1041200000016000000180000001A0000001C0004B
+:104130000001E00000020000000220000002400038
+:1041400000026000000280000002A0000002C00027
+:104150000002E00000030000000320000003400014
+:1041600000036000000380000003A0000003C00003
+:104170000003E000000400000004200000044000F0
+:1041800000046000000480000004A0000004C000DF
+:104190000004E000000500000005200000054000CC
+:1041A00000056000000580000005A0000005C000BB
+:1041B0000005E000000600000006200000064000A8
+:1041C00000066000000680000006A0000006C00097
+:1041D0000006E00000070000000720000007400084
+:1041E00000076000000780000007A0000007C00073
+:1041F0000007E00000080000000820000008400060
+:1042000000086000000880000008A0000008C0004E
+:104210000008E0000009000000092000000940003B
+:1042200000096000000980000009A0000009C0002A
+:104230000009E000000A0000000A2000000A400017
+:10424000000A6000000A8000000AA000000AC00006
+:10425000000AE000000B0000000B2000000B4000F3
+:10426000000B6000000B8000000BA000000BC000E2
+:10427000000BE000000C0000000C2000000C4000CF
+:10428000000C6000000C8000000CA000000CC000BE
+:10429000000CE000000D0000000D2000000D4000AB
+:1042A000000D6000000D8000000DA000000DC0009A
+:1042B000000DE000000E0000000E2000000E400087
+:1042C000000E6000000E8000000EA000000EC00076
+:1042D000000EE000000F0000000F2000000F400063
+:1042E000000F6000000F8000000FA000000FC00052
+:1042F000000FE0000010000000102000001040003F
+:1043000000106000001080000010A0000010C0002D
+:104310000010E0000011000000112000001140001A
+:1043200000116000001180000011A0000011C00009
+:104330000011E000001200000012200000124000F6
+:1043400000126000001280000012A0000012C000E5
+:104350000012E000001300000013200000134000D2
+:1043600000136000001380000013A0000013C000C1
+:104370000013E000001400000014200000144000AE
+:1043800000146000001480000014A0000014C0009D
+:104390000014E0000015000000152000001540008A
+:1043A00000156000001580000015A0000015C00079
+:1043B0000015E00000160000001620000016400066
+:1043C00000166000001680000016A0000016C00055
+:1043D0000016E00000170000001720000017400042
+:1043E00000176000001780000017A0000017C00031
+:1043F0000017E0000018000000182000001840001E
+:1044000000186000001880000018A0000018C0000C
+:104410000018E000001900000019200000194000F9
+:1044200000196000001980000019A0000019C000E8
+:104430000019E000001A0000001A2000001A4000D5
+:10444000001A6000001A8000001AA000001AC000C4
+:10445000001AE000001B0000001B2000001B4000B1
+:10446000001B6000001B8000001BA000001BC000A0
+:10447000001BE000001C0000001C2000001C40008D
+:10448000001C6000001C8000001CA000001CC0007C
+:10449000001CE000001D0000001D2000001D400069
+:1044A000001D6000001D8000001DA000001DC00058
+:1044B000001DE000001E0000001E2000001E400045
+:1044C000001E6000001E8000001EA000001EC00034
+:1044D000001EE000001F0000001F2000001F400021
+:1044E000001F6000001F8000001FA000001FC00010
+:1044F000001FE000002000000020200000204000FD
+:1045000000206000002080000020A0000020C000EB
+:104510000020E000002100000021200000214000D8
+:1045200000216000002180000021A0000021C000C7
+:104530000021E000002200000022200000224000B4
+:1045400000226000002280000022A0000022C000A3
+:104550000022E00000230000002320000023400090
+:1045600000236000002380000023A0000023C0007F
+:104570000023E0000024000000242000002440006C
+:1045800000246000002480000024A0000024C0005B
+:104590000024E00000250000002520000025400048
+:1045A00000256000002580000025A0000025C00037
+:1045B0000025E00000260000002620000026400024
+:1045C00000266000002680000026A0000026C00013
+:1045D0000026E00000270000002720000027400000
+:1045E00000276000002780000027A0000027C000EF
+:1045F0000027E000002800000028200000284000DC
+:1046000000286000002880000028A0000028C000CA
+:104610000028E000002900000029200000294000B7
+:1046200000296000002980000029A0000029C000A6
+:104630000029E000002A0000002A2000002A400093
+:10464000002A6000002A8000002AA000002AC00082
+:10465000002AE000002B0000002B2000002B40006F
+:10466000002B6000002B8000002BA000002BC0005E
+:10467000002BE000002C0000002C2000002C40004B
+:10468000002C6000002C8000002CA000002CC0003A
+:10469000002CE000002D0000002D2000002D400027
+:1046A000002D6000002D8000002DA000002DC00016
+:1046B000002DE000002E0000002E2000002E400003
+:1046C000002E6000002E8000002EA000002EC000F2
+:1046D000002EE000002F0000002F2000002F4000DF
+:1046E000002F6000002F8000002FA000002FC000CE
+:1046F000002FE000003000000030200000304000BB
+:1047000000306000003080000030A0000030C000A9
+:104710000030E00000310000003120000031400096
+:1047200000316000003180000031A0000031C00085
+:104730000031E00000320000003220000032400072
+:1047400000326000003280000032A0000032C00061
+:104750000032E0000033000000332000003340004E
+:1047600000336000003380000033A0000033C0003D
+:104770000033E0000034000000342000003440002A
+:1047800000346000003480000034A0000034C00019
+:104790000034E00000350000003520000035400006
+:1047A00000356000003580000035A0000035C000F5
+:1047B0000035E000003600000036200000364000E2
+:1047C00000366000003680000036A0000036C000D1
+:1047D0000036E000003700000037200000374000BE
+:1047E00000376000003780000037A0000037C000AD
+:1047F0000037E0000038000000382000003840009A
+:1048000000386000003880000038A0000038C00088
+:104810000038E00000390000003920000039400075
+:1048200000396000003980000039A0000039C00064
+:104830000039E000003A0000003A2000003A400051
+:10484000003A6000003A8000003AA000003AC00040
+:10485000003AE000003B0000003B2000003B40002D
+:10486000003B6000003B8000003BA000003BC0001C
+:10487000003BE000003C0000003C2000003C400009
+:10488000003C6000003C8000003CA000003CC000F8
+:10489000003CE000003D0000003D2000003D4000E5
+:1048A000003D6000003D8000003DA000003DC000D4
+:1048B000003DE000003E0000003E2000003E4000C1
+:1048C000003E6000003E8000003EA000003EC000B0
+:1048D000003EE000003F0000003F2000003F40009D
+:1048E000003F6000003F8000003FA000003FC0008C
+:1048F000003FE000003FE00100000000000001FF79
+:104900000000020000007FF800007FF800000704AC
+:104910000000350000000001FFFFFFFFFFFFFFFF69
+:10492000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:10493000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:10494000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:10495000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:10496000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:10497000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:10498000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:10499000FFFFFFFFFFFFFFFFFFFFFFFF0000000023
+:1049A000FFFFFFFF00000000FFFFFFFFFFFFFFFF13
+:1049B00000000000FFFFFFFF00000000FFFFFFFFFF
+:1049C000FFFFFFFF00000000FFFFFFFF00000000EF
+:1049D000FFFFFFFF0000000300BEBC20FFFFFFFF42
+:1049E00000000000FFFFFFFF00000000FFFFFFFFCF
+:1049F0000000000300BEBC20FFFFFFFF000000001E
+:104A0000FFFFFFFF00000000FFFFFFFF00000003AB
+:104A100000BEBC20FFFFFFFF00000000FFFFFFFF04
+:104A200000000000FFFFFFFF0000000300BEBC20ED
+:104A3000FFFFFFFF00000000FFFFFFFF000000007E
+:104A4000FFFFFFFF0000000300BEBC20FFFFFFFFD1
+:104A500000000000FFFFFFFF00000000FFFFFFFF5E
+:104A60000000000300BEBC2000002000000040C089
+:104A700000006180000082400000A3000000C3C06D
+:104A80000000E4800001054000012600000146C04E
+:104A900000016780000188400001A9000001C9C031
+:104AA0000001EA8000020B4000022C0000024CC012
+:104AB00000026D8000028E400002AF000002CFC0F5
+:104AC0000002F0800003114000033200000352C0D6
+:104AD00000037380000394400003B5000003D5C0B9
+:104AE0000003F6800004174000043800000458C09A
+:104AF0000004798000049A400000800000010380D7
+:104B00000001870000020A8000028E00000311806D
+:104B1000000395000004188000049C0000051F801D
+:104B20000005A300000626800006AA0000072D80CD
+:104B30000007B100000834800008B80000093B807D
+:104B40000009BF00000A4280000AC600000B49802D
+:104B5000000BCD00000C5080000CD400000D5780DD
+:104B6000000DDB0000007FF800007FF800000487E4
+:104B700000001500000019000000002800100000CF
+:104B80000000000000000000FFFFFFFF40000000E9
+:104B90004000000040000000400000004000000015
+:104BA0004000000040000000400000004000000005
+:104BB00040000000400000004000000040000000F5
+:104BC00040000000400000004000000040000000E5
+:104BD00040000000400000004000000040000000D5
+:104BE00040000000400000004000000040000000C5
+:104BF00040000000400000004000000040000000B5
+:104C000040000000400000004000000000007FF86D
+:104C100000007FF8000003E000001500FFFFFFFF29
+:104C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94
+:104C3000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:104C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74
+:104C5000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:104C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54
+:104C7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:104C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34
+:104C9000FFFFFFFFFFFFFFFFFFFFFFFF40000000E0
+:104CA0004000000040000000400000004000000004
+:104CB00040000000400000004000000040000000F4
+:104CC00040000000400000004000000040000000E4
+:104CD00040000000400000004000000040000000D4
+:104CE00040000000400000004000000040000000C4
+:104CF00040000000400000004000000040000000B4
+:104D000040000000400000004000000040000000A3
+:104D100040000000400000004000000000001000C3
+:104D2000000020800000310000004180000052009F
+:104D30000000628000007300000083800000940087
+:104D40000000A4800000B5000000C5800000D6006F
+:104D50000000E6800000F700000107800001180055
+:104D600000012880000139000001498000015A003B
+:104D700000016A8000017B0000018B8000019C0023
+:104D80000001AC800001BD000001CD800001DE000B
+:104D90000001EE800001FF0000007FF800007FF8B6
+:104DA0000000023E0000350010000000000028ADA9
+:104DB000000000000001000100350804CCCCCCC587
+:104DC000FFFFFFFFFFFFFFFF7058103C00000000D7
+:104DD000CCCC0201CCCCCCCCCCCC0201CCCCCCCC3D
+:104DE000CCCC0201CCCCCCCCCCCC0201CCCCCCCC2D
+:104DF000CCCC0201CCCCCCCCCCCC0201CCCCCCCC1D
+:104E0000CCCC0201CCCCCCCCCCCC0201CCCCCCCC0C
+:104E100000000000FFFFFFFF400000004000000016
+:104E20004000000040000000400000004000000082
+:104E30004000000040000000400000004000000072
+:104E40004000000040000000400000004000000062
+:104E50004000000040000000400000004000000052
+:104E60004000000040000000400000004000000042
+:104E70004000000040000000400000004000000032
+:104E80004000000040000000400000004000000022
+:104E90004000000040000000000E0232011600D663
+:104EA000001000000000000000720236012300F331
+:104EB00000100000000000000000FFFF00000000E4
+:104EC0000000FFFF000000000000FFFF00000000E6
+:104ED0000000FFFF000000000000FFFF00000000D6
+:104EE0000000FFFF000000000000FFFF00000000C6
+:104EF0000000FFFF000000000000FFFF00000000B6
+:104F00000000FFFF000000000000FFFF00000000A5
+:104F10000000FFFF000000000000FFFF0000000095
+:104F20000000FFFF000000000000FFFF0000000085
+:104F30000000FFFF000000000000FFFF0000000075
+:104F40000000FFFF000000000000FFFF0000000065
+:104F50000000FFFF000000000000FFFF0000000055
+:104F60000000FFFF000000000000FFFF0000000045
+:104F70000000FFFF000000000000FFFF0000000035
+:104F80000000FFFF000000000000FFFF0000000025
+:104F90000000FFFF000000000000FFFF0000000015
+:104FA0000000FFFF000000000000FFFF0000000005
+:104FB0000000FFFF000000000000FFFF00000000F5
+:104FC0000000FFFF000000000000FFFF00000000E5
+:104FD0000000FFFF000000000000FFFF00000000D5
+:104FE0000000FFFF000000000000FFFF00000000C5
+:104FF0000000FFFF000000000000FFFF00000000B5
+:105000000000FFFF000000000000FFFF00000000A4
+:105010000000FFFF000000000000FFFF0000000094
+:105020000000FFFF000000000000FFFF0000000084
+:105030000000FFFF000000000000FFFF0000000074
+:105040000000FFFF000000000000FFFF0000000064
+:105050000000FFFF000000000000FFFF0000000054
+:105060000000FFFF000000000000FFFF0000000044
+:105070000000FFFF000000000000FFFF0000000034
+:105080000000FFFF000000000000FFFF0000000024
+:105090000000FFFF000000000000FFFF0000000014
+:1050A0000000FFFF000000000000FFFF0000000004
+:1050B0000000FFFF00000000FFFFFFF3320FFFFFC3
+:1050C0000C30C30CC30C30C3CF3CF300F3CF3CF324
+:1050D0000000CF3CCDCDCDCDFFFFFFF130EFFFFF86
+:1050E0000C30C30CC30C30C3CF3CF300F3CF3CF304
+:1050F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFF0
+:105100000C30C30CC30C30C3CF3CF300F3CF3CF3E3
+:105110000002CF3CCDCDCDCDFFFFF4061CBFFFFF7D
+:105120000C30C305C30C30C3CF300014F3CF3CF3B5
+:105130000004CF3CCDCDCDCDFFFFFFF2304FFFFFC0
+:105140000C30C30CC30C30C3CF3CF300F3CF3CF3A3
+:105150000008CF3CCDCDCDCDFFFFFFFA302FFFFFB4
+:105160000C30C30CC30C30C3CF3CF300F3CF3CF383
+:105170000010CF3CCDCDCDCDFFFFFFF731EFFFFFCE
+:105180000C30C30CC30C30C3CF3CF300F3CF3CF363
+:105190000020CF3CCDCDCDCDFFFFFFF5302FFFFF61
+:1051A0000C30C30CC30C30C3CF3CF300F3CF3CF343
+:1051B0000040CF3CCDCDCDCDFFFFFFF3310FFFFF42
+:1051C0000C30C30CC30C30C3CF3CF300F3CF3CF323
+:1051D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF64
+:1051E0000C30C30CC30C30C3CF3CF300F3CF3CF303
+:1051F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEF
+:105200000C30C30CC30C30C3CF3CF300F3CF3CF3E2
+:105210000002CF3CCDCDCDCDFFFFF4061CBFFFFF7C
+:105220000C30C305C30C30C3CF300014F3CF3CF3B4
+:105230000004CF3CCDCDCDCDFFFFFFF2304FFFFFBF
+:105240000C30C30CC30C30C3CF3CF300F3CF3CF3A2
+:105250000008CF3CCDCDCDCDFFFFFFFA302FFFFFB3
+:105260000C30C30CC30C30C3CF3CF300F3CF3CF382
+:105270000010CF3CCDCDCDCDFFFFFFF730EFFFFFCE
+:105280000C30C30CC30C30C3CF3CF300F3CF3CF362
+:105290000020CF3CCDCDCDCDFFFFFFF5304FFFFF40
+:1052A0000C30C30CC30C30C3CF3CF300F3CF3CF342
+:1052B0000040CF3CCDCDCDCDFFFFFFF331EFFFFF61
+:1052C0000C30C30CC30C30C3CF3CF300F3CF3CF322
+:1052D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF63
+:1052E0000C30C30CC30C30C3CF3CF300F3CF3CF302
+:1052F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEE
+:105300000C30C30CC30C30C3CF3CF300F3CF3CF3E1
+:105310000002CF3CCDCDCDCDFFFFF4061CBFFFFF7B
+:105320000C30C305C30C30C3CF300014F3CF3CF3B3
+:105330000004CF3CCDCDCDCDFFFFFFF2304FFFFFBE
+:105340000C30C30CC30C30C3CF3CF300F3CF3CF3A1
+:105350000008CF3CCDCDCDCDFFFFFFFA302FFFFFB2
+:105360000C30C30CC30C30C3CF3CF300F3CF3CF381
+:105370000010CF3CCDCDCDCDFFFFFF97056FFFFFD8
+:105380000C30C30CC30C30C3CF3CC000F3CF3CF394
+:105390000020CF3CCDCDCDCDFFFFFFF5310FFFFF7E
+:1053A0000C30C30CC30C30C3CF3CF300F3CF3CF341
+:1053B0000040CF3CCDCDCDCDFFFFFFF3320FFFFF3F
+:1053C0000C30C30CC30C30C3CF3CF300F3CF3CF321
+:1053D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF62
+:1053E0000C30C30CC30C30C3CF3CF300F3CF3CF301
+:1053F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFED
+:105400000C30C30CC30C30C3CF3CF300F3CF3CF3E0
+:105410000002CF3CCDCDCDCDFFFFF4061CBFFFFF7A
+:105420000C30C305C30C30C3CF300014F3CF3CF3B2
+:105430000004CF3CCDCDCDCDFFFFFFF2304FFFFFBD
+:105440000C30C30CC30C30C3CF3CF300F3CF3CF3A0
+:105450000008CF3CCDCDCDCDFFFFFF8A042FFFFF4D
+:105460000C30C30CC30C30C3CF3CC000F3CF3CF3B3
+:105470000010CF3CCDCDCDCDFFFFFF9705CFFFFF77
+:105480000C30C30CC30C30C3CF3CC000F3CF3CF393
+:105490000020CF3CCDCDCDCDFFFFFFF5310FFFFF7D
+:1054A0000C30C30CC30C30C3CF3CF300F3CF3CF340
+:1054B0000040CF3CCDCDCDCDFFFFFFF3316FFFFFDF
+:1054C0000C30C30CC30C30C3CF3CF300F3CF3CF320
+:1054D0000000CF3CCDCDCDCDFFFFFFF1302FFFFF42
+:1054E0000C30C30CC30C30C3CF3CF300F3CF3CF300
+:1054F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEC
+:105500000C30C30CC30C30C3CF3CF300F3CF3CF3DF
+:105510000002CF3CCDCDCDCDFFFFFFF630BFFFFF6A
+:105520000C30C30CC30C30C3CF3CF314F3CF3CF3AB
+:105530000004CF3CCDCDCDCDFFFFFFF2304FFFFFBC
+:105540000C30C30CC30C30C3CF3CF300F3CF3CF39F
+:105550000008CF3CCDCDCDCDFFFFFFFA302FFFFFB0
+:105560000C30C30CC30C30C3CF3CF300F3CF3CF37F
+:105570000010CF3CCDCDCDCDFFFFFFF731CFFFFFEA
+:105580000C30C30CC30C30C3CF3CF300F3CF3CF35F
+:105590000020CF3CCDCDCDCDFFFFFFF0307FFFFF12
+:1055A0000C30C30CC30C30C3CF3CF300F3CF3CF33F
+:1055B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF73
+:1055C0000C30C30CC30C30C3CF3CF3CCF3CF3CF353
+:1055D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF93
+:1055E0000C30C30CC30C30C3CF3CF3CCF3CF3CF333
+:1055F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF72
+:105600000C30C30CC30C30C3CF3CF3CCF3CF3CF312
+:105610000002CF3CCDCDCDCDFFFFFFFF30CFFFFF50
+:105620000C30C30CC30C30C3CF3CF3CCF3CF3CF3F2
+:105630000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2E
+:105640000C30C30CC30C30C3CF3CF3CCF3CF3CF3D2
+:105650000008CF3CCDCDCDCDFFFFFFFF30CFFFFF0A
+:105660000C30C30CC30C30C3CF3CF3CCF3CF3CF3B2
+:105670000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE2
+:105680000C30C30CC30C30C3CF3CF3CCF3CF3CF392
+:105690000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB2
+:1056A0000C30C30CC30C30C3CF3CF3CCF3CF3CF372
+:1056B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF72
+:1056C0000C30C30CC30C30C3CF3CF3CCF3CF3CF352
+:1056D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF92
+:1056E0000C30C30CC30C30C3CF3CF3CCF3CF3CF332
+:1056F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF71
+:105700000C30C30CC30C30C3CF3CF3CCF3CF3CF311
+:105710000002CF3CCDCDCDCDFFFFFFFF30CFFFFF4F
+:105720000C30C30CC30C30C3CF3CF3CCF3CF3CF3F1
+:105730000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2D
+:105740000C30C30CC30C30C3CF3CF3CCF3CF3CF3D1
+:105750000008CF3CCDCDCDCDFFFFFFFF30CFFFFF09
+:105760000C30C30CC30C30C3CF3CF3CCF3CF3CF3B1
+:105770000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE1
+:105780000C30C30CC30C30C3CF3CF3CCF3CF3CF391
+:105790000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB1
+:1057A0000C30C30CC30C30C3CF3CF3CCF3CF3CF371
+:1057B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF71
+:1057C0000C30C30CC30C30C3CF3CF3CCF3CF3CF351
+:1057D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF91
+:1057E0000C30C30CC30C30C3CF3CF3CCF3CF3CF331
+:1057F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF70
+:105800000C30C30CC30C30C3CF3CF3CCF3CF3CF310
+:105810000002CF3CCDCDCDCDFFFFFFFF30CFFFFF4E
+:105820000C30C30CC30C30C3CF3CF3CCF3CF3CF3F0
+:105830000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2C
+:105840000C30C30CC30C30C3CF3CF3CCF3CF3CF3D0
+:105850000008CF3CCDCDCDCDFFFFFFFF30CFFFFF08
+:105860000C30C30CC30C30C3CF3CF3CCF3CF3CF3B0
+:105870000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE0
+:105880000C30C30CC30C30C3CF3CF3CCF3CF3CF390
+:105890000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB0
+:1058A0000C30C30CC30C30C3CF3CF3CCF3CF3CF370
+:1058B0000040CF3CCDCDCDCD001000000007010051
+:1058C00000028170000B81980002025000010270FA
+:1058D000000F028000010370000800000008008033
+:1058E00000028100000B8128000201E0000102009B
+:1058F0000007021000020280000F0000000800F004
+:1059000000028170000B81980002025000010270B9
+:10591000000B82800008033800100000000801001E
+:1059200000028180000B81A80002026000018280D9
+:10593000000E829800080380000B0000000100B0F8
+:10594000000280C0000580E8000201400001016003
+:10595000000E017000038250CCCCCCCCCCCCCCCC93
+:10596000CCCCCCCCCCCCCCCC00002000CCCCCCCC87
+:10597000CCCCCCCCCCCCCCCCCCCCCCCC0000200077
+:10598000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC57
+:1059900004002000000000001F8B08000000000031
+:1059A00000FFFB51CFC0F0038A277033309CE345E2
+:1059B000F0E981831829D35FC6CEC05001C4554099
+:1059C000BC0B883FB132307C66255EFF352904DB95
+:1059D000488281211E88D7883130A84922C41DA45D
+:1059E00019182603F9A150B147403A5F8A32770F60
+:1059F000169CA68029E62A8760A7639147C6196886
+:105A0000F24BE550F99904F40F34BEA28ECAFFA2FE
+:105A10000AA113A0E257D1E4BF42E53BA0FEBAA61B
+:105A20008EDDDC4E32FD5DC302A101FC99B04798CA
+:105A300003000000000000001F8B080000000000B1
+:105A400000FFED7D0B7854D5B5F03E731E3393798E
+:105A5000E424E43181104E1E2068080384888AB74C
+:105A6000271030F6D27678D5582D0EAF10F2866B0F
+:105A70002DBDB67F06084978A8C11F11ADD5E12913
+:105A8000F6821D3122B6880328D2ABBD37587C552B
+:105A9000EB1FD10B8A90442A6AEFB5E5EEB5F63ECE
+:105AA000C99C9309047BDBAFFFFFFD7C9FEEECC735
+:105AB000D97BEDF5DA6BADFD18C93181A40D23E476
+:105AC00022FCFB0621929D1032A1379DE32021D7B5
+:105AD000184292662FFDDD921442DCBAE2BF49A360
+:105AE000A9BBFEE41A9A5F5FECF0AFA44D5B1F4DBB
+:105AF000786A092DBFEFA12FC34FD07CFAEC79ADA6
+:105B0000C5B47ECE24C90F5D1D1AAB1002EDE7D8D7
+:105B1000C276015281E5979030A17F92AFE8F845B7
+:105B200084B8E89F2497FE37891CB2A5603EE4D173
+:105B3000A09E029946483631FE55607E36FC09F536
+:105B4000447767D0EF759E77E513EC7F8E5F0ADBB5
+:105B5000E94773F20372C84DD3C6086D49C71DFBF0
+:105B60005D3908F9C00C99E46387B6D8FE6FCA0F97
+:105B70004C7514D2FE670B08FFF9D94936DA82CC8E
+:105B8000A6EDE13B224E1F1ACC679FD9E8B8DFE0B3
+:105B9000DFDDDF40FFA7C05F4B09A1E5CB1C0C9EFA
+:105BA000E4D9D9C530CE8919D71643BF73A61332AD
+:105BB00088564D9D3DF69044F3EB1A89DF4EDBCDC0
+:105BC000290D1CCF81D9F8CBA79302E8978EEE6000
+:105BD0007D5FC4FFEB38EF643EDE3FCC1E2B10FA36
+:105BE00041F6978AA95D72A0F953D14B486A052DF9
+:105BF0001F1953EE9F769AD0F2E4E9E6F64013724D
+:105C00001D2125C49372EA1AFA7716C9BA2842AD43
+:105C10006A0B8CEEE50F6B4AFFFDF922D001FA12F8
+:105C2000FBD61F6A9CE9E9A0F85A377B9687D0F427
+:105C3000F5C02C0FE0EFF5D9B3108FD6F673666779
+:105C400027025EFB1BEFFE063AD008FA3DC7B3B54C
+:105C50007E9048EA23F4FB393AD1C331FDDF01934A
+:105C60004D256409301B4DB325D5A6D2FA6C8DE8BD
+:105C70009138E39502B1693B92499928E352F30FB9
+:105C800061BB3726D94AC371E67307EFC7551AB807
+:105C9000670EA56FD674127551BA1229AAC6E2759D
+:105CA0005D8A541A8E03C7DD1C5E42687BCFC0E15B
+:105CB0007165D802D09F32470CC4C2F50380674299
+:105CC0006F4AA24CEEE6F818FD72BFFB6C508F33A2
+:105CD0008FBB008E0990AAEC3B0E8F0C7C9301B217
+:105CE0009682FC43C26324E0FBCC1EB9240107E585
+:105CF0008FA1F01715AE2DA47BD41214B256EC4729
+:105D0000F4A42403BD5711DE0F29514F517E1542D3
+:105D1000AB848BD75C6A9E123965F035F0A93B19CC
+:105D2000C7BF1C5E48A018E55231D48878C007E38D
+:105D30002BF94DED02A5CBBAD1E57E946F8A219067
+:105D400033437EE1DF57F43B37FFCCBD9CD291CA91
+:105D5000916B39D38F8ADF2C67EB928EB50820C800
+:105D600064B9490F1012244077036FEBBEA278BCD0
+:105D700004BF5BFBDD6FC8E7603298C927933F051E
+:105D8000FA07BD79D37E07F0F53ADF5E07CC6B5D8D
+:105D9000FE5E827A8AD3C7E8D795AF5D52CED681B0
+:105DA0007C8D80EEC348A79EF2D1A7C6027E76A660
+:105DB0002AF78B747E3B9308EAD9756B48782BD011
+:105DC000B594E5B56F69E1B5748E3B9DBCBE98D6C0
+:105DD000D3BC06EDA9BEDB3A490B87687E6B8B8D81
+:105DE000B51FAB85459A1F319184148A4F6DC5C28A
+:105DF000954E5ABE75A3EA17B55EFD34A225672DF0
+:105E0000B4DFB2DEA60AF0BD8FAD233BF3493844C0
+:105E1000C7DFB139F99B23693E14B2F987D34FF23A
+:105E2000F8FA45D9A5442802B4313A9C21795CAEF0
+:105E30000402E5A9BC7CCB7EFFBF8EA4F03D365D9D
+:105E4000F2AFA0453BD6CF4CD0289E766881043F68
+:105E50004D7FF0C07CCCEFCC0C2600DD766E9C9F95
+:105E6000004CF1C0E6991B46417B61D2611DE96C93
+:105E7000D6FF471F283AEC00384B999E4F6A0D7E9B
+:105E800053A2F9BC4912B9894E21CFAD21DCDB1FE9
+:105E9000B211584FFBE86D8BBE4ED4CD7957EBB4A1
+:105EA0008F817F5D0F160920DA3B3586E7413792F7
+:105EB000F08AECBEE3EF5CC8EA13295D800E2EBFCA
+:105EC000625967965AF856477970713CB95A751CF1
+:105ED0008F487A8990D68B57FA9F4662F0E97AF01C
+:105EE0002881F5E98AE76381275DA07C0F83AB9C5D
+:105EF000EFB91E1CF7CA5763E3F1B121EF1EA07F73
+:105F000022C577612404EB507A61240AFCE2C95768
+:105F100034B00B9A0931C9C5A1D1FB7C1D203713C0
+:105F2000223E58AFD78D7E83C98F5681F830E66FF9
+:105F3000B4F7E4B79358FBC1A88772F8CE537869D9
+:105F400039BB87CB594F7F84AD4724731CC2754F33
+:105F5000E161755E1C7D4CC80A94CB9749E07A815B
+:105F6000A6DECDED51A7066CAEDF0079B7400291F9
+:105F700038DF4D13D87AD242745DA0E9A3442F16BE
+:105F8000709D4B66FAD7B22EF5D19FBC5D16E9160F
+:105F900040DF68D43E803487F831CD23014C4792EE
+:105FA000564CAF26114CF3493BA605A41B5343AFF7
+:105FB000F8892A427EC4C4FAC920E7A4DA638BE5D3
+:105FC000BBD06432B23ECE3C9A2D787390F8EBF899
+:105FD0001D025FE748A68AFC43F87AF16EB018E824
+:105FE000C55428FCBBDBCCEFE224BE0E38EA3D6989
+:105FF000805733DD8D5454CD7C5A6DF0A944241C58
+:10600000C7321FC463CCB8D6FE5673FBC6989F9C9C
+:10601000A2231F496E66CF5038F4BD71F0D1280815
+:106020007C9E41ABDC3AB229BF4B49B6C85A9A6B49
+:10603000744F76E8382F3F894767EB7CACF02ABE77
+:1060400081C1B3A9079E0ACB3AFA97C2F34FA6FEC5
+:10605000A44CB21DD60BA28670DE56BCF6F9DE4209
+:106060008FFEE4D29169D6574A8AD70287859F0668
+:10607000687F7CE34BEA7FE4C3FA1B21412AECA949
+:10608000F90101E67FAD401A13295EC868A2EDA0B0
+:1060900070CDF56ACC8E8B693719F491660BC97493
+:1060A000BECF92EE23D03EE427911DF4B367F36D8B
+:1060B000A55B697DAA9FB663FD05401EAE1D6D0BF5
+:1060C00040B9D19F4E9E32F547FD2E11F0E136E8E2
+:1060D00063F1C3E4B136B41F957CA26F89235FC717
+:1060E000B97C151D71EAB09EB8CA94B0331BFA8F03
+:1060F00014433EB59AF8615D9FD4CDE651C6E130B8
+:10610000E69DFA5940007E6AF7313BC05548D03FC2
+:106110005432DA74F01FDDB40EF5427E541753503A
+:106120003FA23FD81F9E3D5F3DED0BD07E7DD4B991
+:106130006A07BE92FCE9A09F578F56C860FABDF867
+:106140003B3BF6FFB9A762188999CF470DD1B10B38
+:10615000A9C170A6E118A6671BDA31ED6C780BD3E4
+:10616000FEE94A598EDACEEB7EE2D7C01E100F3F11
+:1061700047340FC01DD5755C171CA212B32E808248
+:1061800006FF6FD3D8BCF0DA6CC46B08E64DD56758
+:10619000787836E05B0A009E873822C2D27C867708
+:1061A000C03FD001CA8B8E3CB702F15C4DC6029E47
+:1061B00037C9A40CF43CE013D6897D82ED0E800330
+:1061C000F2F369FEFA8FFAC1FB5986F78C97299E84
+:1061D000004E494B64C6AD8EF2953B910B12D7270A
+:1061E000BD7A92F9D9BDF6BDF6EF00CF964689ACDF
+:1061F00085BCA6684A11B7F7414A8215D3C1DFDCD6
+:10620000563EFD28D80BB9E25787645A3EB45E3A31
+:10621000D911234F596574FDA476C2B0E5E6F2ECBE
+:1062200090394F07407F34B7C55C3EC4C6F5AE8792
+:1062300078401EADF35AB6E85771FDD3550D24EAE8
+:106240009663F202C3A79117BC133B42747ECB4600
+:10625000118C034CB7B1F5B315BEA37C712F4FD78A
+:106260005BFA315269A2DB46C6303D196F7DBADD5B
+:10627000563CCE46FB6BB04D1E67A372E4922204DF
+:10628000EC77975BD1E3F993D36D128E9F20B5EB3A
+:106290002285ABFB3AE2DF4AF1BE4CEE8E827C2CCB
+:1062A0002BD6FC215047FE30CA6312D56162F61529
+:1062B000C153027050784A6C384E04FBE9A6380787
+:1062C000FB7D99CCFA5D364A236837F603E75536ED
+:1062D00019E10CD80409FD344E97551539F74DA333
+:1062E000D94E559F05FD67260567C17846B96F7E73
+:1062F00029FA6319C3CCF42B77D467017F540622A3
+:10630000D3807F4E7B5F6C92E9BCB73610BF44F1FF
+:10631000FF9E2B701BF457737BFD08B07FDF065E7A
+:1063200098002A3B807AACA564A55FA2E572891427
+:1063300095293FCA130FBF2517401A2A86388B9319
+:10634000D4337D47F54B2235BD1C23F58F217EA22A
+:10635000803CD072556F25600F38A8DB703286EF15
+:10636000944C731E6CFAD87C7F7AE3722998E727E5
+:106370008703FE09DAE9DD49CC7F9226FA0B00DEBD
+:106380007BAFFFA606F0FCC46633F967567F4D5A13
+:10639000FE6F69791068E2FEB6B4FCD5B4BCF1803A
+:1063A00097569C9763CA32940B05F02432F907BFC5
+:1063B000BE671DE478F85BCFDB582F5737BC35F844
+:1063C000C3E120A71D833FA4C4592D0591FF423E80
+:1063D000F0B5281C92998F09784F1362526E1718E6
+:1063E000F69B9C5A887494DCD2A98E98F5DDC08FF8
+:1063F000B2FCDDC11F8E87F46D4CAD7855A4200131
+:106400003FD068D713B718E0FAEF34E2A979C41F78
+:10641000A53873A4B0786A7A5E280AF37252FD092F
+:10642000EBD33D235F6BC5F081C50F3B94AD203F9F
+:10643000B48CB6615CB36578E49002F90C6A40D123
+:106440007A67CA5D21886D4CCD637CE3F4B3F5D4E3
+:10645000353C8C7E98A1BFBD1C1F5EAD1CF5B3679B
+:10646000A2D9DE31D601272BA2F436DB51CE94A679
+:106470004FC582BE7E9A539B761AE569A4B93F2325
+:10648000DED16EE3F18B6BC9B5683759E212FDE1DD
+:10649000CD6BF87113D9BCDCD34918FCE6F48951F3
+:1064A000C49BD7CFF066D89B1E3EBF9B4A2304FCFB
+:1064B000BE9EF8F3CD0C6FEBAF8BA27FB77EEC29BD
+:1064C000B467BD851D263FCEF81ECAA1FEFCC4766A
+:1064D000A8A1F618CB1B71238AA7E91969BDEB6146
+:1064E0002BB7DBAD7453279262D0634747A7158360
+:1064F000DEBEB784C24EAB3C7A589762F0ADF27EF6
+:10650000D47C86DF7BCBD87C697BF4D3EF9D9893DA
+:1065100004E366F2F8B0117FEEF1CBEBCD784F28B3
+:10652000B4C4852D7EB7EA67F4524BCCE5AB395F36
+:106530002B22A7572A19CEE835303E4F32F8BC84BB
+:10654000F17932DF37482FD10E011D924A99FF4D64
+:106550002C7EF34D291D8C5E378FC8003FFCFEA9B1
+:10656000DD3E669730BA26717EBCEFC61102C87157
+:10657000728926407D723EC35332C513AC77C9A5DC
+:10658000CCEFF64ED4B05D5209A35B0B7C4CE15FBF
+:1065900003748A891F3B4B5B75A07F6BF14E1D74A2
+:1065A0005932C5E1200ACFD4520A1BD89DB45F806E
+:1065B000D75318C5B85A524970D8A5FC7A42A2825E
+:1065C000CD87F8106C684BE93C25587E6862B22094
+:1065D000D07EEFA77CC0F180713C178FA3DF5F787E
+:1065E00012F5DCFDF04D36C8A9F6EB1C9A27A5364E
+:1065F0003FF807F797E608F1E2E7C6BCFB83CB2A32
+:10660000C712F83531FC7295C8E3DE16FE5D4722ED
+:106610006A2EC857486FF7A5F5EA0F83FF7AE4653D
+:1066200012E3CBFEF489A187DD2418B265F7D51FEC
+:1066300092CEF8DE9E174079EB03EF24C6AF528A64
+:10664000B9FC3691DB7F865ED19207142727A10023
+:10665000AE7722D74F4FDA020BC554F0BBC3B84E0A
+:10666000B8C874AE37199FCA9CFFA6E633BDE24A8C
+:1066700089B076978DA73A90DFD634A8A81F5AC65E
+:10668000DED59E43F1B06678931FBE738C6B19B94B
+:106690008DF6DB3C7C79702B0CC0FD30D4BF22AC76
+:1066A000838C5F8D7D30030E9219D2619FCC097E61
+:1066B00011E06724DB5F902412B58FEB1DDF954757
+:1066C000E1CD6769289FC10DFEC9EBB6E02A9C6F3A
+:1066D0007E6B94A29BCE9BC9CB6A21425C22CCEB01
+:1066E000727C1EB231BE8E9FF6F75D02ECD3C4E120
+:1066F000DFDD22DBA7592D478850087E1BED89F28C
+:10670000C9EA6C6A97C781A391F36BD52E67F8C36A
+:10671000187EAB892499F275FB33C21FC6FA117734
+:106720000AB84F51CDD158433AB200CFEF291AF6EB
+:10673000576BEB48837C17E94E5B027810038F8B15
+:1067400074FD7752BEC4B8907B60EBD6E5F0A781AC
+:106750000CD18540CBE4A90F79988E17DC07E3694B
+:106760002A2BBFD271E3F0F50BB17C4DC457596AA7
+:10677000E56B7F14F9DA9D12C57AB79FF1B5C18F29
+:10678000899C1FAD7C688CBF9EC7AFD6723E5F33BD
+:10679000A1498570DFDA519B309EE62CDA5C017CE2
+:1067A000DE32AA250C7CDE64F035DF17A1FE2EDB7D
+:1067B0001FD35AA3B04E2672BE56D4EE06907BEB82
+:1067C0007C5D9338BC3405BE06B8395FBF07F893CB
+:1067D000FDDD08AEC1D76B07CCD7BA456F9BD3FEA2
+:1067E000FC27D9C2D71E89F1E767C0D7004F0AB38B
+:1067F00063DC3E96CA7EEADFC7E9E70689F9996B52
+:10680000B91CACE572B0B61F39F83F22F303FE9A0B
+:1068100072308BC98143A2E58993AE8C1F25B0D31A
+:10682000E3C87B9E24FCB5E1DE3443BC723CFE270A
+:1068300030CD84BEF434D2CF44E7C0E43B8FC9737B
+:106840007F72BE76687C38FE5364F4A7F82E9226D9
+:106850005C39BEFF5A7015727E36F04382C528B788
+:10686000317A663AC02BA9869E7904D3A979AD28DE
+:10687000A786BE81580AFA2B6A2BC63B9C99AD6845
+:106880009F39F398BE31FC24EB7C8DB87813D73355
+:1068900049792102EB9F3D85703FAA9EF95199CC21
+:1068A0001F30E2D586FDA8187ED4D0BB709FA77993
+:1068B000783DDA97CD37D63BE2EDC336FBEE77F085
+:1068C0004D5FD33EEB1A5A0EFDAEC9BB9FC4B3C396
+:1068D0008C7918FB464E3E6E731EB5A8605CDF32A5
+:1068E000FCDE6AC73467B2FE7ABEE77A57EED1BBE8
+:1068F0002C8F76546E8C9F6FE9C7E00385E843A325
+:10690000103718E41E09E74C9A84043FD8C74D920B
+:10691000209D72901E7BA95A891640FF2766BC9C59
+:1069200085F6B23DB806E4BCE9AB8003E2A9AB53FF
+:106930005EF3C6969F9DF1E6B7C16CA5DFD5E27EFA
+:106940008E8348B1FB6327DCDBD17E4BC837C7E9B8
+:106950009C14AE0902C413CCE50A8FBF2899E672D5
+:1069600099C75FA4144B39E70FB934BE5E7993EB36
+:1069700015DF02764EE7C41C16D73B712B4F6730EC
+:10698000FE3EC7DB75F334C2F5EE5F531F25E5F617
+:10699000C2EF9BE2C7F822996547BB3E2B859D2B32
+:1069A00020B1E726E05F6BA24462FCCCA18197FF97
+:1069B00008F1D4610BBECA063C6B15EA615846DB90
+:1069C000A56C9CC76342F72818CFE63A8BFBF5020B
+:1069D00045E3726A120BF4DBDB2185EFBDC0523A4E
+:1069E0008F7B0591BFECC03722D0298CA98B44B195
+:1069F000DE433A309F081BE6B9E08751BF4BC433F2
+:106A00004C611BC68D7ECCF643D688786E83A80376
+:106A1000B4BFC9ED2AF89742887EE71AF877BE40DE
+:106A20006B31C8C4E0B208C693ADED7C53D839A031
+:106A30003E7AFBAF4FDF375273818F542C37E81CFF
+:106A400014F54E6942DFF25F8981F312C6AB58DC60
+:106A5000CD5A5F2AE91740DEACE5C20B7F3A057ECE
+:106A6000F4AA6764F4A3A73C2347BF41F3355B0452
+:106A7000F4536D079DE80F773EC2F2518FA243FB9E
+:106A800073DB058C07D5D9DBEFBD01E28ACF880423
+:106A9000FD8D7019EE8B9DE27326FB59BE9C07801D
+:106AA0006AB61C9A0BDF57ECB713D877A8796EF14A
+:106AB000B76FA0F9C5C764F4516A76AC50607F65C2
+:106AC00049588840BE6B32C1F143FBC4F00EDABEB8
+:106AD000CBDB9E36C70DFB2B0EA25D45E1F6B4A7BE
+:106AE000CDA6F4A90C3F350DBEABDC2DF8C1FF9847
+:106AF000F2CC8EA319F4BB9A27043CA750B5CB4522
+:106B0000B418BA9C6A13A3DF80F8339D27F8C58BAD
+:106B100049EB34C07BCD8E0D8A1613B73CD330922F
+:106B200068F6DE7CCD13741CFA5DED93821FA658C7
+:106B30006B2341E08FCEE79C65DBDC30BF15CA08D4
+:106B40000FCCAB5981768BC3F3F6C17E7A65788B17
+:106B5000328DD6573EB245298FE1A7AA5DD7102DB9
+:106B6000863F4E6DCE4DBFD47A7B86AE5BB1F0547E
+:106B700012A6B788145666C4EC7B76C8499C3F457C
+:106B800053FF06DF875E2718C70A3DEF41BC1A7422
+:106B90005BA632BD60D0EDBCCAE9287517CD88B3BD
+:106BA000AF7A2FD0C10EF12A15D3FB1B7C986E6CE7
+:106BB000D0903E9B007F57E1BE06967B279162886E
+:106BC0008B7875A2C2529F3C5D2F96214E1260F9C0
+:106BD000B4DB83827689F91BE92639380F825CB7EA
+:106BE000C94F4C96E8BABE49092E257E3ABEB47705
+:106BF00072C97560A705E7C8A9B09F1DAC60F1E830
+:106C0000880FE4A289EFCB7C4B66F2D694A1607C1E
+:106C100064D3F78BB6A1ED41185E367DBF7C27ECBF
+:106C2000ABD17EE6CA54AE1A65DA4FEEE5FB499B5E
+:106C30003BD1D44FDADC0AA39FC5D88F7360FD6CBB
+:106C40009A7BBD199EB995463FF5D88F6760F34A88
+:106C5000BB6392199E3BAAB19FF4DBFD681F8806B7
+:106C6000FF9076DC1775EF4E1AB796C4F2D1E41F89
+:106C7000C3781E2A55B17C943831C1244F497AB269
+:106C8000293FA874B0A97D6A20C7549F5E76B58558
+:106C90002FDDA8BF314F818A26B138AB325841BDB4
+:106CA000533CD881F9BB06BB51EFDC757DF02AB0AF
+:106CB000F70056D0F37729C1316A1CBEA1F3120840
+:106CC000C6CF341BA47DEC32BEEF3979C85723DE22
+:106CD000A7DFD7D9BA4724D1FC434AF12330EFAD1F
+:106CE00032B3E38D3843829DA0FE6BCE2EDA168A36
+:106CF000C16BCB50CA2F426FBF2D72D007FCB87347
+:106D0000F56F574A14BEA6A10A1E6E7A5CFEEDE12D
+:106D100010B5999B8796FB00FF7685EA8FD8F11511
+:106D20003A7E3E8EBF1BC6DF2B333BD93ABE3D6752
+:106D3000A2697C475685697C8742C7A7F2B16FF587
+:106D40003B7C7C8ABFEB0979567E07C7B76755E065
+:106D5000F8CD0AA9308D9FD033FE01909FC3FDCDA1
+:106D60003FE77AF3FCB32ACDF357D8FC8FAEFE8011
+:106D70008F9F80F37F59FE80CD3FAB92CDDFCEFA5F
+:106D8000ED19DFDB83FF5761FEAFF537FFDC49E626
+:106D9000F90FAB36CFDFCEC67F63F5277C7C378E0D
+:106DA000FFA6FC099BFFB06A1C5FB107FDC047CA84
+:106DB00090847AF09FA961A461405DA3E3403A9278
+:106DC000C5A937C83908C75D098CEF3E4FA0FCE65E
+:106DD000EED5A7244C2590EACB5ACED355BB8B15C4
+:106DE000E62F84D05F58C4415DB85FC4F58C6CB4A5
+:106DF000878753783BF78B21C82FDC78239E5BACC9
+:106E0000B313DC77A75630FA1FFFF1C0E8ADB1F33A
+:106E1000B2A68B5A65CBFE1383C738EF5424ABA6BA
+:106E2000FC2988A7503D7C12FC1F9A9E96E978B4F5
+:106E3000FC43F083AE8A951B762E8C7677229FCE0C
+:106E4000EBBB1CFE5312C3F7A93B05DC47F87CC320
+:106E50005205F4D9A25697C96FA8E374EA7ECE8E84
+:106E6000FB8DC679BE5B501409F9FDC16F1D05BBD2
+:106E700071F1E641A6EF6E27E1D5701473C1FA797E
+:106E800043553AFFDBCAECE3448C6BEB43581C9C44
+:106E90000C81B84959DB067908CDDC52269BECF908
+:106EA0005B83E6FC6D15E67CA71C966D60CF2C110C
+:106EB000C816DAEFF7EB65CBB900368E5749E676A0
+:106EC000251BEFBB948619B4E8FB908E836215E90D
+:106ED0003A5765DF1AF0D4DD2D9328AEC71DA9B847
+:106EE0000F144A45BF2DA8B2795BE19D2B3BF400FE
+:106EF0008567EE8F44C4A715FE8E832EDD46EDF325
+:106F00008ECD7F90217E6C9D8F15FE3B965BE7A317
+:106F10002AB03ECC0B59CB199F58F9A96E7FF13698
+:106F2000B33D7BF3B658FBB56AD70C537E49F85690
+:106F300053FBC59BE799EA17B52E31D52F68596ADF
+:106F4000CACF0BFDC8D4FE8EE52B4CF5DFAF5F63D7
+:106F5000AABFAD6283297F6BF02153FB5BCAB69851
+:106F6000EA6D07477D07E468D5EB229EFDBDE03E54
+:106F7000752FD89B17DC12EE737E44ED159083338A
+:106F8000D45E81B473FF78F4A7A91E2C874DA2F9B3
+:106F9000CA98552D99A09709EACF7265C2AAD02444
+:106FA0008A17B0D7A97C889B15121D04CE4C720F8E
+:106FB0001F778B31F51D97A9DF4C057D7CDF7AB1FA
+:106FC000237E79DDD679C3D4387E6AAFDC9221B0D6
+:106FD000CE7559CE9F1869B5E53CA7B1BF7D81EB51
+:106FE000D96A85E983EABD1993617386FAE523E2DC
+:106FF0009D9BECF93E22B00D48B0FE53811F869850
+:10700000F66BAA76E59AE4FBEC2111E1AA059D4016
+:10701000F5EA1752608D0272163D92356B34C0A1AD
+:10702000AF5540EFEC4FC575FD6C43E936D8AF3F27
+:10703000D310C0F4A386324C4F350431FDB0A10209
+:10704000D3930DF59876342CC7F4BD8610A6EF3691
+:10705000B460FABB86564CDF6AD88CE91B0D614CD4
+:107060003B1B744C0D79E8D1BF016E0F1B1BD784FD
+:10707000DBC37C2E8DA93DE7C270FFF7BCFBF3118B
+:1070800060EF9F7FCB8EFB6CFDE1CBCA6FFDD351D0
+:10709000477BA53C3C089D636BBD3381D1C9692307
+:1070A000A5641CECFFECF4CFCFC7BCC42EF584FD67
+:1070B000333C71FA85785DFAE5E944F4EE829994FF
+:1070C0001EA71EFEAF22E8F702AC7F60071C1171FD
+:1070D0001D26D16D7EA0D795E24D78E1F759102F8E
+:1070E0003BD783BFF62C888B5DABA8D8FFF9363B26
+:1070F00081F8D2F9032EBCCF75FED8362FC8E33203
+:107100009F188E3D47614D6B22D961B7C9EF36E7B5
+:10711000CFB70AA5781E9A6889B347035FA961387B
+:107120000FD2D9E0C3D4E867994FC171CEECCA65DC
+:1071300071337E5E83EC4E427EA57E27B6FF9F862E
+:10714000A7BF7E0C780869231F38085E71BB98DBE7
+:107150007FFB7EF949FA4C81F82A39207F0EF682AE
+:107160009DFE77111C652261DEE8B72E2286EC6356
+:10717000A07CB7693CFA9D66F8F417732EC5B7E694
+:10718000FB34220468BF469CA40AFE80F330F5025B
+:10719000C6AB8C784997E46E11C6F4C64BEA78BC4E
+:1071A000B8C6D1A10469D1B9B6DC4BEE9F9E69384F
+:1071B000A6C239AF0A47AB02CE4F45645409E8B9BD
+:1071C000736DABD2C01EAC12CFDF152F7E9B6767ED
+:1071D00071BD2561B9DBBC8E72FE20B45FA39C1D1E
+:1071E00072749F8AC99FB5313BDBDAEF04FBC0F6AE
+:1071F0002D6A771F9F7683D6174FB5FB3F55303EDC
+:107200002E11535CC9C0DF7B4A60829DE2A972D710
+:10721000FB688F7E248746DC7D09FDD4777E6E9FD8
+:10722000E97C7288B4C338F327F2818876CB3B744B
+:107230003DFDF815999DDBE4E7807BF695F9BEFEF0
+:10724000029E9BDF5685E7843EDEF78F68FF2D2484
+:10725000012FD281B416811D798ED84A014FE7C81B
+:107260006BDEF13174B8953A4A40EF052D663B86E6
+:10727000DABFA6FCE2CDE67C39999906FAA47CA394
+:107280004CC202CECF547FB35DC57E1793FA265809
+:107290005725EE8FCC57893484EAD59A677F5634C8
+:1072A0008FC211B4333FC888BF2C49667660654AE7
+:1072B00058817DC20FDAC67FF70620833DDC04715A
+:1072C000289248FC3B485FFC5E29FC56788DF5BA55
+:1072D0004F1C88C321EE12E2EE03D6DA056ECF868C
+:1072E000303DC0E76DF805C72CF915767EDE5224D7
+:1072F00022D0FD9CEA08D912B1DE1F8578DC5EBB86
+:107300007F950671FCC06A7B6A6FDCDF6897640F4B
+:1073100062F959E1D5723CF720450BF0DE218FEF81
+:107320002B9C1FC4046F019C23F540DC1ECE753AD4
+:10733000BD5B21DFE4A9C0F31F7520EFB4BF7BBCA8
+:10734000D38E419CDA415AA33AE55FBBCFB21FA06E
+:1073500099F32E904BD0675080E7A209C6B95C2301
+:10736000CDED3C7E73FE312E8F7481433EEE39DFCE
+:10737000E67047E13C0999289DEDF1B772C0DF63E3
+:10738000F0C3FD56687FA7CADAD7F27DDD3BDF9EEA
+:107390009C9E7C097D54F7A540C231EB489DD4AD3D
+:1073A000001FD67D2961F9D7D69B1A5D5563F4E697
+:1073B0002B4AF059FB04A627013E818E13BBDF64E4
+:1073C000BD877002F861422F3F7C6D385288497F3B
+:1073D000BFA7048FC583E36BF7EFEBD3FF09E0BBD7
+:1073E000FFB1FEF3FAF4DF110FFE9A67F7EC0BD151
+:1073F000F5B5F2170F78E110D3C7526B1A9CEFACBA
+:10740000DEB1DA0B72F99114F2025D3F0E8B71EF6F
+:10741000E7A63B0CBED3DD708FB096F3DD999FAF2E
+:10742000FB36F82F9FEF90558C0FECB247ED942967
+:107430006BDB9630F9D8657F9FE59BF1BC53DD7E11
+:10744000B3BEA87CFC81340D0F5585B8FF1C45FFE9
+:10745000A076FB7F4C03BBAB8E74A3DEB37E07E349
+:107460007F998CF6C03C25B16FBD710EAB8EE3A544
+:10747000AE6D1DDE13AF6BBBF934139A0EF43BAD4A
+:10748000DF5570BBDFE1309FDF34F042C2CCEE5FEE
+:10749000F5C48305EF53B8CE6E7FC52BE4C7F22940
+:1074A000D37FE7230B1EFBA5D6BF5C7552FD186B7F
+:1074B0005F1BEBB4B69FFB2B07585A2D47BDE00F5F
+:1074C000566F91F1BC7BF59E6D3B1F86F8CCDB7649
+:1074D000FF70DA7FD59E97DEB89EE6AB9E9253A6EC
+:1074E000B369B8E19EA2419F3AFADFF271BDF4A8F8
+:1074F0007CFA25451BCDCA7F9CDC4B97AAA70E2999
+:1075000064745F7C4C891C52D87EB6853E91F7A787
+:10751000815FB1EA892F14D05F1F1F14487A761C4F
+:107520007C6E7909ED63C013D293D3AB877E96F658
+:1075300075942EA8172DF4B2B6FB98AF07D02FC4C0
+:10754000E3297F3FF94BD8B7F99DDD0F78A878F292
+:107550009FBC309FD3523DE3F39FAD4E83FB20157C
+:1075600072284DC59495573CFA03E4BFC5C77F9078
+:10757000C6CEC5EA19FC5C5706CC73D12373709E46
+:10758000E524887C58F13376CFFC82444A9F8A23D5
+:1075900027F739D83A767AAB1D37114FC34202FB31
+:1075A00018AF89E11D180F64E70D7F60EC3F91650E
+:1075B00098BFE060F45AE430EEF1D1A524967FB78D
+:1075C00037B7039DCE0CD5D3218E5C47A410C78757
+:1075D0007091F62B1E9F9ACECF1D685211FF8EEA36
+:1075E000FF29500EEDDB65DD5960FA8E5CCCEE1D97
+:1075F000FF4E3E3E853B01ECD7D369D41E8C33BF92
+:10760000030E639DA676560C9FC5C83B93FFED6B9A
+:1076100098BC1BF21F9E510AF59F9D607204DF818A
+:10762000FD42E18AA663FDA1D902EA073B89C69320
+:10763000F3ED32977373BD955F28FC12ACC73D7CA8
+:1076400003E324231DD0BE2DDF48BF8FD5AB30AE62
+:10765000B76FBF861C2FE6FA60AD451F90475207F3
+:10766000B47F5B2D87773E0CF24BE535A481FCCAD5
+:10767000F85EC127BB8FBCF13D2AB79F440CB935DA
+:10768000EB55ABDC56EC9D40E2C9ED276E3F892BF4
+:10769000B7B43CAEDCBA3B909FFFD67AD5C0E3D3FB
+:1076A000163C1A7AB23F7C5AF5E4B71D5A5C3D4944
+:1076B000FF9D20457DF9D1E04383FF2AFFA506CF3A
+:1076C0000BF5F0A9C1873D7C6AF0619F78A4098F12
+:1076D000D6FABBE16F3A85C07332C6CFAB0FB0FDAF
+:1076E00067FADDD12185882F1D9739D27A74484AEF
+:1076F0006C3E6CC9472CED754B3E60691FB4E4EBE2
+:107700004DEDABF71F51D8B99EA8A99DB8FCA7E4D1
+:107710008338F101631DAA6BFB5409017FB8BBF1EB
+:107720007B79250979205EFEBC88F1F22E8AE3265A
+:107730003A4ED7EE6C7C8F60B593C557BAD46E2F96
+:10774000D893AB9358BE3B5569023D6894773B593B
+:10775000DCAF2BD0ED4D8AB1EFDE3F20A21EEF084B
+:1077600093D2787E28DE40A1F8ED20FDD5B3FD80D0
+:107770002EB0D761BC84AC30F0E354D19DB51CE28F
+:1077800035AD22DE6B5BB8E2162F9C23E93A90FB05
+:107790009D325ABEE8D722DBA60CE952468C1FF870
+:1077A00011096D9A24C0FEF57AE49F0507985FB829
+:1077B000707D7C79A8E4DF95BBEF5440EF527FEEFB
+:1077C00064ECBE87D14FC52396F203FFC8E5A6152A
+:1077D000E31F95DBCDF5411E3F18ECE4E7BEC792F1
+:1077E000B1DC7FB7C5DE0F9E2AE67FA78CD2A7EB60
+:1077F0009848E03CC1F90322D2E7FC6E767E00E3B4
+:10780000FCD701BF772BB1E7A9CE827C5DD5BF1E27
+:107810003BFBCCEF8BEE063EDAF74EC14F697A7632
+:10782000DFDB237E05F967DFCC7A87F46D3FE5A0C7
+:1078300013F755BA0E7A90FFBB9EFF4DD6DD907FB1
+:10784000CE8EF1ECAE835F14003F75ADB457801E51
+:10785000ECE2E7EF563DFF454107AEBF8D48C7A9B3
+:107860004EE64F9F3FF05FEFC1FD81F307E8ACC0EC
+:10787000BE38E842F9AAFBA513E36F5DCF7F511430
+:10788000EB27FCA5F3A9E5FB9D5D1E52B617E04B67
+:1078900062FB4475BFBA6E1BBC2F51D3764859406A
+:1078A000EBA7BCF0A702D0AF5D7B99DDD429773C74
+:1078B0000AFB7981350F34CA945E9D20648369FF89
+:1078C0006BDE280139EA8B973F615C71A0F858FCA8
+:1078D0007F0D3E049DE93F4F184C852907FFF8DED8
+:1078E0003BA0270EDA912F8DF97E125981F6CCE557
+:1078F000E6DDF4FFDCBC85E840E6BD03E63DE1EFF4
+:1079000077DED7C0A1A1D4BE72D097CF9FBF0BF3B3
+:107910007B3C7E847780FCFED2DFF9FCAF98EE7B67
+:1079200029DDBD979FF7877FE7F3EE9FEEBF9ECBE4
+:10793000E9AEC27998BA17FE84F05DA99E9312FE53
+:10794000BEE5BDBFF91BF6FE5A9BBF35271BCF9383
+:107950003AC0B0707B66B6407871EDC8992AD89D60
+:10796000623FEFD54C48607E9528B0F721C850168D
+:107970000F24DCCF82630DF80E889BDD3B93DC4D3A
+:10798000687713C9DFAE53BCACBD7ABE1FCF1A9166
+:10799000716F05219F39C98FF16E8BBFD928105D9A
+:1079A000A0F6AE74F5378F81DF238FB445ED0598CF
+:1079B000BE0F69338F63CAAA62F287DCF9E6BC5353
+:1079C00033E7EDBC3F0761F03B7C240CF16C71D4D4
+:1079D0006115CED3896325024FA538496B08FC0E8B
+:1079E000BBCFFC7D5202E17EEF5F86C78A0416A7FB
+:1079F000128571ED3AE071940DE3DC78481BF1E2F9
+:107A0000C7F7BA08F7AF7BF1DAD40EF894C03F6637
+:107A1000F617FAD584FBD312EF421A69D39DE676A6
+:107A2000DC8FBE2C9D185DB2AA399D9699E862D074
+:107A3000210E7D4C7431F07CA5F4B1D2C58AFFEBE8
+:107A400013185FF7472F832E996E1DEFD7C9DC7F80
+:107A500028013F13F2990182FBABDC7F905274BC8A
+:107A6000A724AA7EBC97007E5C941AE02FEFDE86E6
+:107A7000F1A4733F7FFFDB004FD5AF44E2A0F8EBEA
+:107A8000DCED2151F85E0A2BE09F56B689B84F40D5
+:107A9000A468D1AC987D62C30FA8FA8507E753B9F3
+:107AA000D71E9E4EBFAFDCF74101DA612BBBD1CFB1
+:107AB00009FD5C60740F7514C03E70A5C4FC112BE9
+:107AC000BFAC4960F196B3CFB9CA20AE23EC62E7F0
+:107AD0007F2B23B7C8F698734DA10499C59B9E735D
+:107AE000A15E083D21E0F928802FF6DCA9E1879C02
+:107AF0007D4260F0ED97F19D98CA5D4F75427CAA7A
+:107B0000F22DBB1FCCF8BA5D9FE27EC8945FECF10A
+:107B100076A01F2E9AE2127DE201BB44E48FDAB612
+:107B20001AF443681EF9A236C2FDEF2BF457AB7E60
+:107B3000F1FC3EB87056F5F4E35E887F9D69DFE1A5
+:107B4000C5B8C0AE4BC7E7FAF8FF9135DCFFFFD6EA
+:107B500069764F3BBEFF7F06FEA076F1D30996FB08
+:107B6000ABBB06B1F71449B4E852EF7155EDB9F06B
+:107B700028C4AFCFEEFDE45180BBFACF7F7814FC70
+:107B80000A72D0A9C27D82BA9FBF8EF13EE3BBDFED
+:107B9000703DD0F9C4E3182FED7C9BFA1FF45FE72A
+:107BA000F3A7B3C0CFEC7CEA8F69104FB9F3F9A902
+:107BB000F86ECE9DCF4C492771F4899102FF86075C
+:107BC00010AFB5D2ED48DB11F47FCE51BA83FFD9A7
+:107BD00013D789D4B07899C6E339BBE3C7C7FBC4D0
+:107BE0006FDA667DE7C6424865BF460610C7394171
+:107BF000E939660074DCCDE375916F5D328E730EEA
+:107C0000FEA0F43A6BA1E385B6458F3D0C756D83FC
+:107C1000FA8DE34407803F23FEBE3F41FF2201E48B
+:107C200068EFBF60FC0CE8379D4EB873CF852CD849
+:107C3000BFF848EE9E8BEF853C6F57211E51F9FC33
+:107C40009B284F9DCF1CC7F836E171F04ED2F38FC1
+:107C5000C52BF999CCBAED1E16FFE17480F890E6B9
+:107C6000C5721E07627C6DC487FA8B0B8D71B17370
+:107C700027C6BE40CDF67778BCA5976EC244A0D784
+:107C8000FB97DCCF30F0A0021EAE8D8D7BC68FC37C
+:107C9000F5C43D2D74037A42BCB327AE49D8137B9B
+:107CA0007561E1CD7871F4CE2D2C5EDA29C73F8F56
+:107CB00065C441AF7659E29FE181C53F2F378F2BD5
+:107CC000C5D3609786FD5AF175F6ABF8FAFD5BAE49
+:107CD000819D5FE8777FADDA7C1FE63D2538DD05C5
+:107CE000FB6B6DEF2B04CFA774B3732B7CBE67F9CE
+:107CF000F9D3B33F17312ED6143982FADDAA3F8C5F
+:107D0000FD572BBC7770786BF7B3F5E3EC5E4FD87B
+:107D10004DFB397BF839E4EBDADDEF635CEEE8AE7E
+:107D2000A7958E98F516D68F70CC7CCE3E79A8801C
+:107D3000C579E3DF1BAB71317BB3EE40FC71EA76B2
+:107D40007F6A1AA72A1451981D70E9F1CE48FA2DBE
+:107D5000D0DF997619DF4D3A1311E3BE171C70C9B5
+:107D60007C1FA195C90F5D47F19EC071767FA7F07A
+:107D7000B5043C577FE7F1D277E0FDB73BA95883C4
+:107D8000DDDFB682F169DB4FF42140EFB6E3DF13AC
+:107D900061FDDA07F88DB1FF8B4ED44FF150FD50E5
+:107DA000F46EA010D8D5AA77AE7DCB66829F8E9355
+:107DB0000EEB4223ED07EE83C0B939BC57EE9D565A
+:107DC0000AF088AA4D750A7DE721BBF97D55DEAF23
+:107DD000AC9AEF2190AFC66BD08F6F268B4B66CCE1
+:107DE0003252169F0C19F787CA13C2ABE87C7FAFDB
+:107DF0000637BB285E7C9E8DD92F1178276AA20694
+:107E0000F6D3632E7EDEC14BBCECBC833B64A37A0D
+:107E1000FD61FFF60D93089E67D8067CD9739E819D
+:107E2000440B802F8D767DEA2DE71D32E1132A5A0F
+:107E300022873317EE2550FDB26A86772BE41FF1B7
+:107E4000B0F7CDB248F72138DFB08DDBA3D960158C
+:107E5000E7F67DE7ECEBBE6F9632A578E9303F851B
+:107E6000D3F55F53E15C7CCA2DC54F0D5169852D5B
+:107E7000631ADCA34979BC786C06CDCF5FFFF4347C
+:107E8000ACFFF7E2B15934FF937B0EB2FA2A01CF6F
+:107E9000C1BEB0AE761AF0EFD796FBD9143366B9EF
+:107EA0007F05F0772EF0EE77176970AEA25BE1EFF9
+:107EB0006504A0DDD0890C7F99EE779F027F6598DD
+:107EC000AD6305F0EB63CF7F9184F716F9FBA12A30
+:107ED0006954E1DC152D9A78F112E7F3FABCFBCC7A
+:107EE000F5CB8D49C177813F9AE78DBC6F1A1DEFA5
+:107EF000E18A710E760ED0F24EA39A82745DC8E9C3
+:107F00004AF83DCB457C3E8BC590C202DFAD5C7F1D
+:107F100019EF51578B57F41E3587ABDBD5EFFB6755
+:107F20007F00783393827F00FC59DF3F7BC515B813
+:107F300000F519E55FE27D5CE33D33EBBB6844EAA5
+:107F40008EFB3EFB56FE2E5A7FF0FE9B3B28BA6905
+:107F5000FF392F687B8F51391BB350F1C3D1CF311B
+:107F6000CB0BFDD220C226047610A71F3CCF88F78A
+:107F70001FEE22B85FDB651774F0AFBBFE49457D8D
+:107F80009EB9703AFA5F5DAEEC089C33EABA5BC307
+:107F90007D3D8A0101E469E881C428F887541E3ECA
+:107FA000B7C8C3E766FE378FDB7551DBDF81FDA9FC
+:107FB000BC3F6AA0C5DC8BED12999EEE6AD0108E94
+:107FC000A1247408D6FD818E97E3E6EB37A7CF4650
+:107FD0009B9EEB9E80F81FEE8EC1FF2877BF74CC6E
+:107FE00077333AE6BBE3D0D1FA6EDD7BAEE058687A
+:107FF00077BAFC28BE5F677DAFCE4ADF3AA9F5218C
+:10800000783B2BEDC0A7B8FE18F41BB37C2CD2290B
+:10801000869E93008E31073EB501BC061D1FECE71E
+:108020003C79A99BAD73D6F1D2CA3A0607E3B49F57
+:10803000E5D64CF70E0A1C457E89CA69BA8DC587FC
+:10804000FAB6EFB7FF9C4B9DF32C5059BF14FF734A
+:10805000004F06FE6F75F3FBEA7DF17F3BB4A3F89A
+:10806000BF1DE63F00FCCFBB14FE0DFBBF8AEB87B4
+:108070002AD89FA27CF41FDACCB41C3AEE34D18DFE
+:1080800072B06487C8F731D9FB5F863E59725DFDD7
+:1080900021B817B9E46702F2EB42FEFEE527FCFDCA
+:1080A0004BEBB9C1F2B210EACBCB9F1F0CA33EAA97
+:1080B000DA652EFF6777CFBB975978DE172435AD89
+:1080C000F7BD4E2BFECFBBB9DE58E8B4C57B2FD72A
+:1080D0004887D6DB4CE7CC33A6F4F483FEA0CFA6CA
+:1080E000BD89F1B87F9509C4137429A510DE192044
+:1080F000854209F45BCCE5D7E86FD872F3FA9F1D8F
+:1081000032DF43CC6D31DF431CDE6ABE8778D56633
+:10811000F33DC45161F33DC46B768D33E54747AE03
+:1081200037B51FB37FB2293F36FA4D53FBF1C7660F
+:108130009AF213DABF676A7FED5BF34DF5D775549A
+:108140009AEA6FF86899297F63F73F9BDA471731FE
+:10815000FD78B8617911DC5B30F07278A96253A1C7
+:108160007CE9089B5A105B9EA66B059016E9E07FA0
+:10817000F5272F531C3F2A8A5DA78B896CD26F533A
+:108180001CE67CD46DFE7D8F972C7235A47E52CB7D
+:10819000089A1DBC240FCF6353F93AC6F5DBB10131
+:1081A000EAB7DFA07CD5469B206F952FE3BD019AEF
+:1081B00086D88FADB0779F1F729AF9D4D78F5EF9AA
+:1081C0009DDB3807D4CAFA53CBC64B263931CA3F98
+:1081D0002A8C2D17164FC77340FDF5ABF8165CB30C
+:1081E0007D10BC3B3C0F53A3BCA9CC16F7DCDF676A
+:1081F000EEBFD07FDADCC78EFA0CF07CCEF7DA2641
+:1082000038BF567B7B37FA511976335E7AF3EC5DD3
+:1082100063039E471A483EACF7C6FDB64534E1EB12
+:1082200036CE77D1DB33D3E09C41663FFE55A18744
+:10823000E9EB471B42D72C04C21187E95E7956B49B
+:108240006E1AF839C3F879EB4DB6F8E7A0923C0CFA
+:108250002FE9A048C15E50DD682F9C2B7FD70B4FC4
+:10826000C7DC680F2679E838F3C7B417B1FBD4BA76
+:108270007FE6E85EB80D7D94E50E6C02FD92E59315
+:108280008896DD179EF4DB832DF08E7863B2CDEFF8
+:10829000C67CB700E3D97F4CC8203A5EE39F458493
+:1082A000AFF1F075783EC8EEAEC7B8AB314FC2CF74
+:1082B000091871E60BBED98980CFC6AB7BEE07E10A
+:1082C0007B9017DCC176E8F7C24619C76D9C2C98E5
+:1082D000EA8D794B9BBF8DF7BEB2DC6CDEE574DEB8
+:1082E00000B73D93C1D5F8A8403211AEFFBDF428C8
+:1082F000F835FB5CF8DE07C5C710C0C7393DFB7316
+:108300009B31793AAF9A41EEAD6BD19E89EFA74E82
+:1083100037E6A18F34D13BE32A33FCE24619FDC690
+:1083200045496E3CEF106E8872FA9AE7DFE49BF9DC
+:108330009D5B295CAB4E88F8DEB6D6D1BAF428FD39
+:10834000AEBCCDE50F6B7DF17F4E63F052F8A77B9D
+:1083500040DE364FC3F9E3796A80FF31813C9C0DE2
+:10836000FC172C453E186C23B06FD3C74EF0307904
+:108370009EED51D97B35BE722687BE85D76CA7FD91
+:108380009579FA5DF76FF3B075FF364F9C75FF7204
+:10839000EF075797B51F8554D445B43708A91F1167
+:1083A0006B47533D560EFD1B7931F1C705D06FFF6A
+:1083B000769ABF6544F6E5ED34B0CF800F0DFBEC47
+:1083C0004E8FD9AE8CD1BB3FF430BDFB43CFC0F450
+:1083D000EE8FA1FDE9EF45E3DA35A94A7CBDF7B49C
+:1083E00087DD1FAC531582E703FBD90FD8C9E5DA47
+:1083F0003AEFFED6A5CBF91F392E834FCDFAFEFCFE
+:10840000312D11F454CA0742DC77B7862CBF6D3C7E
+:10841000D06B9BAD7833CCF76716FE78684D9FF52F
+:108420002BCCF1188E8BC76A8A479B098F3B3C97F0
+:10843000B00FBFB6BEAF30DFF3E9E4F8A67ABF09EC
+:10844000C63B37EBBD22886BD4CEF91CF5FED71E98
+:10845000A7CCBCAE187E391D6705E0A173D69F7905
+:108460007CAE03E34AAB9EB92A11E25835930D7AEC
+:1084700044F07DAAF3F939489773FBEC3AC0792EA2
+:10848000999D133DB7EFDAA310F7F8A4E158722CC9
+:108490007DCF3D79BC48A6FD9DDB7BBC48C2037700
+:1084A00061D33BD435177F5B1470F7DE4BE8E137BF
+:1084B000075B8F363A597CE54138173786DABF6A51
+:1084C00012F2657A9AED5E28171DBF1DFC215C39FA
+:1084D0003FE62FA659B24AD03316C17ED33C37EEC1
+:1084E00067F972C9C86CFA9D12AD87E3CCC4F96A0A
+:1084F00098C0EF04B84E44F1F7023CEF7660F83EC6
+:10850000F143B2029EC2FFBD1A3C09784F3AAB0953
+:10851000891AC4778A6E1E4753690AD3BFDDB73AFA
+:10852000F0F78C8405AFAA53A8FEDA3C93FD8EDDEC
+:10853000F9630B92C01F695599DEF20DEBE163B44C
+:108540008B07E76B371723E6757C574055191D924B
+:10855000336C6B8A358CC7F9F398FE25521AFF3DB0
+:1085600029CAB71ECDA6431CD8F8CEC5BF2B52FCD6
+:10857000BFCE037846DBFCF04E8FFBAB6F38CA9260
+:1085800069FBCC28BE5F5E94C0E19DC3DE07EFFBB4
+:108590004EE345D37D18B5D4FC4EB727D0B414E2D2
+:1085A000FCD0EF6DC9F8CE8BB99EA2389196BB0B6B
+:1085B000CDE5AE0A9A8FE147EB77D6F6865F92AEAD
+:1085C0003238F63738100FBF6C50FD79948F0E3467
+:1085D000F8307FB041C334DA3012CB0F37F8312F87
+:1085E000DAF46C984FFAAF7F9014BBEEC2EF549D53
+:1085F0008CE1C37572E4ADF9808FDF8888AF15AF69
+:108600008E47FEDE349A8E3A86BD677332C6FEFE12
+:10861000E9F257D24A285F0DF9D1AFD34AC6C3EF6A
+:1086200096B0F31770413AF61EEE7A25A0F993E062
+:108630007734C6343B86C2FBA4C15BC9589423FD82
+:10864000C589F0BB0B7B336CB47E9A94D7ECF807EA
+:1086500080ABDE64E7AFE7E7331F9F6CD6AFE3BCC8
+:108660004CFF660AC5E3BC71F8097E5300FDAC39C6
+:10867000C6B907331E8954BFE1768AEBE6EFB3DF54
+:108680005F4854C7FBE1BDF7CD5EC3CEA9F7C5BEB9
+:10869000E7BE99FF0E44E2E1256817293EF63B103C
+:1086A000290A7B0F8904934DEFEDCDE5FDCC06063D
+:1086B0009AD0571FCFE6FD151D790EFB83DF9788F3
+:1086C000F5EF87F0DFC3D8CCF5D3743550EC4DED22
+:1086D0006D67D45BBFEB59776D21D10BF6430189F0
+:1086E00080BD04ED8A69BBD40F0302DCEF33CED723
+:1086F0003E0BF8CDEFFDDD937D02C3EB933C7D8A0D
+:10870000FF4E49D4139807E3FB163C12DA0376CAEE
+:108710003EBB06625274E48FF87E94F83BC501E7D5
+:10872000FC530FBCCFEEE5D93A1438BFB8D25B7C0E
+:1087300013C45145A53E03F3F74E6F81FC839EFAA7
+:1087400087D8A3DDC537011FA4F3F706080400018D
+:108750000E08AAE18F63FD43B34E65649FCCF22BF4
+:10876000BD37368732215F3F0FF808F28DB4BF7DE9
+:1087700049C121C0476EE186E6633742DE687F0368
+:10878000B6FF895765FE8F3B980DF64A4F5EA57977
+:108790004F4C5E6279E260A931BF9A237FC473D0E7
+:1087A000B507D83B5DA907660830CFD4FD3310FF6D
+:1087B000E7D5B7BC2B348C878F60EB048B971BF409
+:1087C00030EEE1A6D983F77963F8619DD76CC7C411
+:1087D000DC27BC0FF0DDD31F8FAFCB36F69E4AF7F8
+:1087E0008FD8EFC60D037B5484B8B986692EDCA3FD
+:1087F000A7FEC170125C3998D65FE3CD413A5EB5F1
+:108800003BFBCDA95A2F5FA7642977803E4EB5F870
+:1088100035D95C3F8F508B7F93482B370AC1B5F019
+:108820009E6C688FACE27D935D19284767B98E22F4
+:10883000F583315FCDEFBFCB2B836B47811E59C4CE
+:10884000F46E5576A058A6DF573D978DBF0B67F0A5
+:108850005D5552246D9CBBF75CB791377E47E42190
+:10886000B5D509EFF218FB5AB5FB3764C13EFDC719
+:1088700087DE463B71496236C259D3765C81DF6937
+:10888000A96DA37C47BFFBD8D963C7A35FF287C894
+:10889000A06F02BEFED068C3CBDDFDD9552F52FDBF
+:1088A000A6D385EA688303D39D7AFDD5E00A9CF0C0
+:1088B0002EB8C949F9E9F11C5D05FEEABCB71EF501
+:1088C000D8E38A3A0AF8AFD3FBC366E0E7AA24915B
+:1088D000F3EB0F5FD6F3F87E3DCDEFB9B7EDA6BF52
+:1088E00068DF60A1D9FEA97BC48DFC41ED92DF0257
+:1088F0001FD56EB68560FDB339DAF1BE7327E81B6C
+:10890000D45FE6FB991B05A60F4373581CFA72F758
+:10891000342BBE7491708CFDBD2491E9AB0A29847F
+:10892000FB76155F7AB1FE2F1FC769BA0FDA771C85
+:1089300037D61BE354F78E837C52FDF661F4CF5F8C
+:10894000BCDAB0AF75D4FF773EC5CF6138F574E8B7
+:10895000E741D9D027D4CFA47886E71E793E24F901
+:108960000879A947FFAC6D2EC904FAF6D613B37E79
+:10897000D2254AB79712783E747F73C9A438ED1395
+:108980002CED738CFC4FB17F2B3C0F3A7BF30EDA4E
+:108990005EFA93BD270FF06DB059FA4B36C6DF86ED
+:1089A000FD19FCB7C7BBFB6578EFE9A5A440F11042
+:1089B00066DF6820875B24157F87D1C0F31EBE3E2B
+:1089C000557C798D09FFBD782F30959F6ED04CFB7B
+:1089D000A18B172EC37B3F7BF83A564142EC3EDB1E
+:1089E00023B9A67DD0FF0FC7D785A3B81F384AFE8D
+:1089F000C6708C32E9815E38F24DE55F170E316941
+:108A0000766936EC53ADB1A19F90660B3972C06E9A
+:108A1000FB5FECF71A203407E799A8616CDA57CEB0
+:108A200039609F07C6798E448E49E3409E746D0578
+:108A3000AC533F91D0AFA1E50E3919866ED5E1FD5B
+:108A40002B2A95D85F4E75B08619F5E6776287AB0D
+:108A5000A458A2E5E3D579B8EEE594DD5507F6FD17
+:108A60003677E1CF571393BCA27DB25A588AF6C726
+:108A70009AC4179B61DF383D81D9330279B1F95827
+:108A800046BC7A26AF2DF7BD7813C431B6AED4AE4E
+:108A9000067F6EAB331C390CEBF93D6EFC3DAADC56
+:108AA00075E116F8BD0A71830DD74B3129BC6B2BCC
+:108AB0009C177860841FEC8BAD60D740FB356E5CF3
+:108AC000FF5B1A42682FAFE2EBC0F6F5935438E72C
+:108AD000DCE8969261BD6B91EB6F05B85EBAEF640E
+:108AE000B3E33AD063FE96413CEFCB80754DCB713A
+:108AF0008CE5F514195B576883C18534F2C3FF44D4
+:108B0000AD12D43327D10E6B742FAB043B8ED6BF7E
+:108B1000ECA0787A3C99E385D7E7F4E8A593CDA05B
+:108B200007C515BDF9123AEF1D3F637AEA09DA3F2E
+:108B3000BC2B45E713827718BB4749E8872524C13A
+:108B40006FC7D074740EFB9D5BAA17BDE8C7493888
+:108B50005F631F4919C57E0F1DDAC37A9390918315
+:108B6000FB98CA0CF65E83E271E3FD66E37756DD9F
+:108B7000C4F8A7B37829DF677159DE4370AE5F8907
+:108B80009BE94E783721864F15CB7B0B1209CC071A
+:108B90007B4B54CDE5BF49E4FB4A83D8EFAD0EB71C
+:108BA00085D02EA35284E935248AF6D968D281F97A
+:108BB00031E06DE6C2352C0D2F8E8D27BAC8E2BB91
+:108BC0000111ECC7B45B8D784CF0F544BADEBF966A
+:108BD000C8E336FC778C536614E27E7D6612AB5F89
+:108BE00015C8BB0FECBC8D33A6619CC6B0EF8CF5ED
+:108BF000D2B0DF16729857AB425C7BC1B0EB163A2D
+:108C0000593E75B6FEE068886BB6530B341BEE2FE9
+:108C1000B3F86AF9E6E234B0CB161EBA15EDE44CAF
+:108C200095D9658B36CE5082A3E1DEDA3CF4078A13
+:108C3000374C48847D84D54E7FE27585E867E2FB3A
+:108C4000B903B5C7B6A65D3519E471AB8D1290CAEC
+:108C5000FB4BB2EE1E0B7CB1210FEDCCAD09C1C6B2
+:108C600024DAEFD67FD6FCAB68FEA74EBDF0388C79
+:108C7000B33A81D5C3BB51C09B3DE712B6E1BBC936
+:108C8000FD8D6F3D97F052127B7FCAA8FF6F537E18
+:108C90007C7D0080000000001F8B080000000000A9
+:108CA00000FFBD7D0B7C94D595F8FD66BE796566A9
+:108CB00092C963F2220913C24B5E4E9E80224C126F
+:108CC000C243B44C102A20E8F03490A7485DDCBAC7
+:108CD000FF0C043050B60657112BEA8462C5AABBBC
+:108CE00041A31B35EA8080B8D66D44DAD216FD8FD9
+:108CF0004A1510488AB5D2FEDD65CF39F7DECC7C47
+:108D00009319F0B5FFB4FE3EEEF7DDE779DF73CEE1
+:108D1000BD73E912FC4D612C94A43056CAD8C151E0
+:108D20008CF58C618CA9DE2406CF4D066FD2E2341F
+:108D3000C6FA7EA367BBE1F517666F92C3C6D82556
+:108D4000D12EFA79AA99B1A089B1B3CD6E161CC102
+:108D5000D8996633956B961F98C6A09F9A0E85B9D1
+:108D6000F2195BC5DA36633FAF3B9269DC55013DD2
+:108D70000B8E64F47709FE5BBDFC28D55FDDC9EB83
+:108D8000D7B20EAABF92314F073C6BF75A59D01C8D
+:108D9000AE5FDF51AC691F4AD251BFD725FB063BFE
+:108DA0009C8CDD5B3DFCBE2A789F565D62F6E1FA45
+:108DB000588EE313ABA8AF87F73AE6EB88B1AE77EE
+:108DC000045CDE49828A4EACEDD0B132C6D63AE0C0
+:108DD0009F2EC61E50D87C6CB7F6F715192963C2B2
+:108DE000EDD62A9E0CC798F8706ABCA86781D48813
+:108DF000B2DA67C4F5355E34D2FBF30EB35F0763B6
+:108E00001EC9F43F702DAC7F26EB5319CC539F90B5
+:108E1000388E5DCD588B2571373E67BA0C7DA10821
+:108E200038303353717E33F82BF6EBC469479471B5
+:108E3000D83E40ED67D98EA90C4073C45E7303839E
+:108E4000F737B090CA0A06CE0FFAFD28B2DF5923D1
+:108E5000B5E51BDDDAF2EC09DA32637E82D74F9A90
+:108E60009BCA4E1AC2FDFE04A6D611032EB70258A5
+:108E7000B17EED5E4BE064041EEB3B9235E5C6AE81
+:108E8000ACC0C988716AF11F59F05F135F779D58B4
+:108E9000F70746DFAD0EC05B3D0B1971DD40C146E3
+:108EA000EF58C6AC16E6457C1DD86FF1B012E8CF7E
+:108EB000666EB7007C1BBBAB9525F0DE6A87EF3092
+:108EC0003F2796E16935F0FA8C05880EE08FDA3994
+:108ED000BD99ED5B15E413B7ABDAFECDE7DD00FF1E
+:108EE000DD93024F953DAC2446ACA30ED6911E5E99
+:108EF000C739EB0765882F58CF6FECA5481746A6F2
+:108F00002485D7F3ADE1B55C0BAFC65D36A237184B
+:108F1000E7BD4418A761A7CE6F84B2CEDC63447E60
+:108F2000B917E93C06DE721C4A4C3C6F433CC7E073
+:108F3000A7EDACFC3EE4C71CE41F18C7B6EE2765DE
+:108F4000278B818FAA3717FAA0BE4D05FE86715474
+:108F5000F8BFA908C8D93B6D5532D0E9293BE7C312
+:108F60000D892E7AEE50BC0AE2355DE7C947FAD585
+:108F700027B843CCC1F1A366421960CBAEC162F9F8
+:108F8000BD1EE8EF21981BCB168409F078C8C2CB30
+:108F90002F39CAEFDD08E36E4AE6E50D3FBDB9D5CE
+:108FA0003F09CA16599E43E5870C6D413DE0DDFF40
+:108FB00082C9F5443EB5F728585E3032F0044C4D76
+:108FC0003F8465235EA62642E720B7F42F9A769B5E
+:108FD000A05ED0EEFB2784A75CFF39FBF13C362670
+:108FE000667F7E4D7F79DFAC3F18BF537775F8FB06
+:108FF000D4C49D413D6FE7C2762CA7E7033FF49FA1
+:10900000FEA2896D85E22306769B17DAD55D2C6377
+:10901000C10839D423F079B6D941725BBEAF43F9A8
+:109020003D06F9A987E4707D47AA46FE4AB95C7FF0
+:10903000F15A4D7F398E7CC257BDDA43F2ADFEE264
+:1090400064FA1E12F2F46C7326E989F8E30CD2C8B4
+:10905000F5F0381359B0F872E34CA2EF721CE6CB6E
+:1090600022B9BD06E70C24A43782BC87712E0C758B
+:1090700025255F469FD976029145AC679B1A3463DC
+:10908000FFDBDC071CBE18FC20E544B8BD51DB1E2D
+:10909000F4231B81F4ED6348B7FFAC7ACC91FAD48A
+:1090A00066F038506FA8F68A232E37344D7E6486DA
+:1090B0000A286951393D7FD9B681E8D16E701F41C8
+:1090C000FCDAED3A971FBEAFB7E93C48272D0E7387
+:1090D00000F1BD51B9C1817243F66B07318FF3B80E
+:1090E000601B427A3DDE7AD58B89540F669219A9AE
+:1090F0001FFFF7C683C5170F1C8FBD31F1880BFA10
+:10910000574B746E0BE00B91FA71041D44F763DF4B
+:10911000A9C69C77743D09FFB8F836841211FEE7A2
+:109120006DBA198118F32E4D56BE9B9E5A1425DF39
+:10913000937F3B3C88ED95D00F0AF249FE9626A31B
+:10914000FC2DBC9058E922399FEEB573B185E3B68A
+:10915000D88E9A7DA48F98ED13D9BF3E3EFD49B8B5
+:1091600018DEAA64881F6004867AE34A70B02B4137
+:109170002FE29715AA0CE5D3403A6FA7F9F4D777F9
+:1091800043E711EB6F51DD0EA46BFD751E33CA99D9
+:10919000F58E39E6109437AAAED9F92087FADE02A7
+:1091A0007B12D6B729ADC81C8B8F5AC16EC4F92D5E
+:1091B0004DD669D6239F661DE7DFE8F75B92B99E1F
+:1091C00068DD3FB1C753129F7E40D279518F9BCB50
+:1091D00054C756589FDEC0E76B896307CA7EE3C158
+:1091E0006BCB7E0BC96975A83980F644F4789B5423
+:1091F000778F07BE6F82F9F8B19CC3C7DF54A23ADC
+:109200007643D71657023347D437384B08FE176CCE
+:10921000694C0FDF37213DC6989784D3BCE4EF68D3
+:109220003FF9A2E832F7B7C3D9100D5DB6C6A2CB9D
+:1092300079A8374BF9FC993972FE4393BE8E7C8C2A
+:10924000A69BB249CC837C9701CF76586FA7CA669C
+:10925000EC437D80B6D64498DFCD36E600993E39A2
+:10926000B57C6732ACB7ACE78091213F743A691D99
+:1092700075A27DF4B8A6148E3F538A839E49C73DDC
+:109280004F4F01F876F624B814F8D49902FA300654
+:109290007C8F08BC33D6C69F6A681CF28FAC5FB661
+:1092A000887976C3F350026B3583BDB24FC807C6C9
+:1092B000EEE74F151817C699FDCAE8DD642F8AF549
+:1092C0001F02B580F5D3D343E314FD77C0DB5E58AE
+:1092D0007D04DEEACD21C2DBDB46DF6B089FC6E3FF
+:1092E000A1742C771E3D9387F870B670FBB5EF25FF
+:1092F0006B00E96E207ED6D3FCEA2E0E62FEE28180
+:1093000078AB5383A45FEB2EE6D17758B7DF9C127E
+:10931000FE3E1B6C8609B02E66E67042F8C4C2475A
+:10932000BBE06B890F50EBA3ED021F08A78FC43E73
+:10933000A71FEF4EE36606783F6BE6EF996724DFE1
+:1093400087097DFE51425E00F7331F0D07CE467A36
+:10935000505DE9917AA7CEE2B96F3EAC9BBDAB6799
+:109360004FC06359A5AD15EDAB65264F12DA5DCB45
+:10937000DED32BEBF30984C4072B043CCF32F75D1B
+:10938000883FFF368BE309C29F76FF97BFA3BCF8E7
+:109390001D68BFA24BEF46937169A5CD8FFD96F571
+:1093A000543C6D87F72B5BAD2E06FD2E9BE2FE0431
+:1093B000EDBD65F7595C1BF271BF38A43C0BFA5D3B
+:1093C000FB60BE03E581759D37D3EC0693E07EEB31
+:1093D0004C2BE06D93B264895208AC7D7FCA1615A0
+:1093E000F0ACFE57E56716285F757FC116F3758CE4
+:1093F000BD82B21CED59FFD09968DFFE12A746F678
+:109400002EB76F7F794427CAC55BA6820A18E5ECA0
+:10941000D4D960CE2B538AB79861FCF4144FA10EB7
+:10942000C65B93326126F6B7F4BEB17FDD09DF7704
+:10943000A4CC9AA9E613DE447BEFCCCAA1D06E92ED
+:109440002CCFB354427F695616B6A72700BF0F0929
+:109450008F8FF67767BFFDBD60E6D41CC04B4553C8
+:10946000A50AFDBF9E72DB9631573136FE817287A9
+:1094700007C63F98B264A615F0DF6994F5976DF1C1
+:10948000C0589DCCF78601BEFFF1FEBA9966A89F31
+:1094900096EA2D74C0FA53CDF76F9991FB1DF865CC
+:1094A000A412BD4F2C487112DF1C4690E6ADEB3381
+:1094B00072FD2AF83D87D3717F792494ED11E54C34
+:1094C0005EEEDC105B7E9C4EE572B93321F6778F41
+:1094D000904B00EFA00EE9B3CB1A18961F9627C049
+:1094E0004FE609C45FDBB93C01BE9A63273E8ED9C3
+:1094F000DF37E55F803BF5D3A97AACE8BF90720D0A
+:109500006666C571BE4C7669E47559CF5292B7BF95
+:109510004A157CEBE2F071566AE50A33F70C47B85E
+:10952000C8768BC53AF3474BFF52D088FCB9D6E2D8
+:10953000C9C0F9ACDD579EC12E6387D75D2CD7F823
+:109540004BC2EB984AEF07F40BFDB944FFEE315FD5
+:10955000075EC95780571A7DBFD23AC3FD69FD3BEC
+:1095600003FBE37E9E017AC5187B9E1B53B85E41C8
+:10957000F8EB22E4DA4A215F416A913D7EFEC5ABF9
+:10958000766FCD8F1C7703F50FF87D7A0AEE2F41A9
+:10959000BEA21C2B533DB3B07E594F8A03ED79A078
+:1095A000B78D82DE54A43789E7CE94A6725AEF763F
+:1095B000C5B13B861DF81339AF36C583F649C622BF
+:1095C0009F7E49C4FCA4FC87FE3B45FF259C9E1F53
+:1095D000EDA7E7C5C83FC22FC4DC40DF6307CE5FFD
+:1095E000C136CE08FDF5822580F39170FBB6F42FCD
+:1095F000ED87BAB87A2A91DA651C0F26BAA09E21A7
+:10960000C5C5F9B9E3E3C46B515F75E999E2E2EBD3
+:1096100046B95126E5A4BFE748854A764C582EBB8B
+:10962000C89E917233683687EBDFBFBD67C646942C
+:10963000AB26BE2F4FD383142F0ACFE3E514AE2FF2
+:1096400027F89827961D7824D92EE508ADE3E17513
+:1096500095EC63589F5DE8D709213FF9B39E4C66AE
+:10966000C23EE1F090FA7BB629F4AFDC4FA6A547E5
+:1096700059063BA5415710EE1FBFCF89A0FB63825F
+:109680000EA2F1F35DE513C0C18F70484DE172C8C1
+:10969000096505ED0B15F417C0FF5CB5CDBD353F71
+:1096A00062DE362E8F9D7A1D976357E08BB454FE91
+:1096B000BDEF253BF173181EDC8EF92F01F7761DE7
+:1096C000ABC17DC1211DF009D2A28DAFF3FC8B5936
+:1096D000D4EFE7293AB9FEEF452EB71B613CCED750
+:1096E000643FD6BF3CA85D3B7FDEDFDC544E8F6518
+:1096F000C73D8568C70CF3DADCB85F28EB9973C007
+:1097000000E5E1DD8A036B4B3A1FDEC1F914A84B7B
+:10971000C0E5AD6722FBB5A5723AFABED631FC387A
+:10972000A757C4CBE2083ECD4DB57178C1FA4C08BD
+:109730004F552B47E5F3FB9B87F78001D65B07F07E
+:1097400040B12DE1D6D9B1648305F9F83873231FF0
+:109750009FEF58A21B8B78DDC9C8BEEB970F0FF0A7
+:1097600075487B14E8B203E9F2EAD45C1A6FD87149
+:109770008F750C7C1F867613FA953BEC01DC574CF9
+:109780004EF5CD4D4578CEEDAB64204A1AAC4DEB8D
+:109790002D11EFFBEB77417DA2639F7E2CCEF3363C
+:1097A000C6B6BAC2EB81A9FAD11F5A6F043E2DA0EA
+:1097B0007210E1D669E4F5FB16338ACF34E8FB8CEE
+:1097C000F81DF4F72CA2CFA3BA14C42FEE9BD06ED1
+:1097D000AED37B7314DCD76798DCA807601F42F414
+:1097E0007EC8C2540BF4FF263C514E57E9EFD88F88
+:1097F000F0AA2A50DC2D24AEDA85DC6041DC37CDBE
+:109800009E62257A645FDD39B41AF5BF95E309FAE3
+:10981000318B7ECCE6A230FFFD3AEF2ADAFF48FD1D
+:10982000764851A89F43D78DDEDD12B12FC2FE507E
+:10983000FE1F52AA73EE40FA17FB3AB20FD3C27A58
+:1098400017ED95225B24DEFD627EA13CA4A3487B3C
+:1098500014EDD37E7BD6DFB1653AC8D9F1333A82B5
+:109860003A0752D1F333FF01D65105F6AC05E0704B
+:109870005B2A973387F2FDFA449CDF30583FBC3AAD
+:109880009CE01BD3640B8F932EFC0FE946EE2F4810
+:109890004FE0CFBFA7723BE727695C1EFE218D9783
+:1098A000D31363FB2BBE10F55413971F5BCBB9FC8E
+:1098B0008FAEB741F4FBADEDDE318A667F0F76EFF8
+:1098C00086546EF71AB95F88C713960AFA063B8763
+:1098D000F014B6AB783C50DAA15FF4CCA3F272F38B
+:1098E0007BD9E8BFBFED9FE6DD87F4B6F2377AF2A9
+:1098F000579C14F18295C9BEF464DCBF27C4F6AB53
+:109900003C27D675BA99911FF8538C1B82EC3D8980
+:10991000714328AFDAF9E034E4BFD52C40FEE0E52E
+:109920003B37515C707940612E05F7695EEE271672
+:10993000F858BD47AFF14BDFAE361993C784E977CE
+:10994000459B366E58B3AB5853FEF6F669250B446B
+:10995000C8A1B0FC9946EFA3FB95F41E6DA77ED479
+:10996000ECD2F8C397EE1C46EB97F5973137AD77FD
+:10997000596B8166DEAC95F349BCF949BA45BBD455
+:109980001F739E46CDFB8F00FEFE08FFFFD25343A0
+:10999000691E2DA9BEFF40BA09CFC3CAFC1ABFDA9F
+:1099A00024C727B05666E17E49A023FFE5EC81502D
+:1099B0002AA7FF6F0FF7D171F605E3FEBFEE0BCAC2
+:1099C000267139CCDA14360C1EE3A76AEDB4BFA0B9
+:1099D000BE2BC5A795EB6B61472D5FA4AD7751D426
+:1099E000BB28EA5DC9BF12699F290528D7787F0D7A
+:1099F000828FF3CF1C35BAA0DEF8346EC716393D1E
+:109A00009750EF6CB3248E437FCA364B5E00F552FD
+:109A1000FFFABA381D6D33483F8A3B03E1D6FE5F3B
+:109A200077B6A888C77DB00F007958FEE841168A3E
+:109A3000905337AE533CCB01DE7621EFEADC7C7DE0
+:109A400075EEA07128F4935DC7E795D3B15F5123FC
+:109A5000DAE5D4087F5F9A41B3CFCCC1324E258D71
+:109A6000CBE39C9AA03214EA65EFDAA3A8D85F870B
+:109A7000427A33BB0900134157D925DCBEB9B1A4E2
+:109A80005D5936260C87565DF51807E0A735DDEAE7
+:109A9000467D738FD337240DE7792218C4EDFCF887
+:109AA000133D2ADAEF3F757A0AD29C6138B8F48EFA
+:109AB0006CD4A7D6137C9E6DFDFB63AE6728A24DC8
+:109AC000FEABDDDC9ED1B3238CDB87A4AFD2378C19
+:109AD00024BD27E7979E22F4453AF33D67A3FAADEC
+:109AE0008CF0C9683DE91B86EFE6F62CC7775581F7
+:109AF000770FBEAFCAB8AAA805DE176C0BAA4BA198
+:109B0000DDCBBB62FB83CB853E81754CC2F5C9754D
+:109B10005C492EC87A86387E0AC90FD619B1F71F5C
+:109B200030227D2F7F346D21CEB76EA39199943072
+:109B3000FC7FEAF4CEC6F96477B42B081BE9DF9307
+:109B4000E34AFF1D7E47FEFCC828F996D35F5CFE02
+:109B50005FA7F72C8F94671B8D8427693F87E7C722
+:109B6000EDFDD5695CCFBEEAF42EC1F934746D27E2
+:109B70007FCFAA3D1F1A63F9ABA3F9E24A70546A7A
+:109B8000F8BEA06EBE3980EB2F7F54253AA8DD6861
+:109B9000A43859DD33FBB89FE71EE6463951D7B1EB
+:109BA0004F590EE3D63EB34F591101D74175010508
+:109BB000E733C22EF990CBAF68BA473F32DA2D8730
+:109BC0002D5C4E9C2DB7F91580EB5983AF0EEB9DA4
+:109BD000CDB2BAFDF9613CBCB96FFA11CC37B03FD8
+:109BE000670AE2B355B73BD30CF55A4719DD485F16
+:109BF0003F75FA36235C52546F27B64F4EB3BBD72E
+:109C0000435B978915A1BCFBBA70181F4527E3EF8A
+:109C1000E1FCD3857288DB9145C83F8134BBB4A792
+:109C200048AE1D36F0753CC7F87CFF9EEA7990E897
+:109C3000F8480A8D9B5D1754D09F9D7FE639926B43
+:109C4000B2FF309D791E89E4DF2BCFB3C388F45671
+:109C50002BE450F9A37B948F23E6FD4B30F4916EF7
+:109C6000B29F01BAB4D1F7FD33D3A83E33B9F0BDEA
+:109C700042ED6AE1FB8A087923D71143EEECC3F584
+:109C8000D84EF41CE47227C8FD8D62BED1F87C1555
+:109C9000E51F7C9A06EA99DE1BFD23312E7A78486F
+:109CA00002F527E54034DFBE2AE81CE5A5CE46FED6
+:109CB0005AB22BE5FC64BD2267C5FE3482430FC156
+:109CC000A17E974AEBA9327A87DE11C10FBF16FD3C
+:109CD0001DB8F90323CAFD07FEFD5DA2C7FA36854C
+:109CE000E2F1ACED5DE33CD447FEA7F46867CEE259
+:109CF0002601DBF1C2BB84A7599D5C2ED777EE53BA
+:109D000097D9C2749A7FE6C0AD4867F51D2686FBD9
+:109D100022A0BFDF207CA2E954C247CADD78F8B494
+:109D2000CEE07294F98DE44785FD543EFA29A4DC17
+:109D3000FE7BAA4EF809F8FB0B69BC1CA61FDFA727
+:109D4000088FB0DCB5105FE49F293A60C67DB85B30
+:109D5000213F7F5A258767E4BCAAC7C6979BCE548C
+:109D6000A137D450DE1C7B58BEF7CB7FD1FE0B81D0
+:109D70006F781FE4EFD910D4F372FED1F8CB77726D
+:109D80007D1B83CEFE1BD711ADDFA43D20E9E6C9C4
+:109D90005DAA468FD89D46EACF0E1B739CC78E7274
+:109DA0001ECFD861E0FA6CC77A7300E5C99B0B78C7
+:109DB0005E997DA13188CF43BAA575F8FD50361F55
+:109DC000BF55A75B83E5D60D36D64278F5243A4BCE
+:109DD000917E1219978F5C1E3EF03C9767757E5BF3
+:109DE00080C13FEB7C739753DC39CDE2C6B833F3C7
+:109DF0001D34CEB30FA42BD773FB8D2E783FAB83CE
+:109E0000F39FC403C853A22FC90F12AE617872B872
+:109E10004B7E92F8F8BBF46703BD7CA7BCAA3DDA81
+:109E200078DCDB46DFD54EBECF3A6C70A19F86C78B
+:109E300017E2D16FEDBAB7B34F821DB53AF32D7A61
+:109E40004ABE85FDAC86BF2709BC1738B9BEAF74C2
+:109E500072BAA92DE920BEAC3DD944FC6C9BC1E58A
+:109E60009AED84561E33F6CF62BDDBA85D95B563CF
+:109E70001AE677543DAE3870BF1F4F6EDEAEF0FC71
+:109E8000B84F77BD9188F972EC2BB0F2319E62E148
+:109E9000EB9DEBE472E2EC5E0038D17B93F172F65D
+:109EA000FB95FA63C1630AC2B356C0FAEC3395134B
+:109EB000FF847EECBD49EE61B0E4CF9EB9E9EE3F90
+:109EC000C1BCCFEE99E246F7655A8B97E8A7CF69F8
+:109ED00071E37E03C4F70CF417AEEF7823F15A68F0
+:109EE00077FAE9AB8B506ED78A799E795EBF0EE127
+:109EF000B2E1C97F9B8CDF6B034AAA09C7D9FBF883
+:109F00007F6763BEEA9E46F217B53CFDBA11F317B0
+:109F1000748176FE7E6F9203EB9DFEF9F6C908EF21
+:109F2000968E16FA7EE6E7ED543EF0E4BFBDF67776
+:109F3000F4E37813DD58EFCCF3FB092F753E95F26F
+:109F4000DBE2D1F58E7DFBB9BC443D8F7C309FCBED
+:109F50003149D7927E4F3F79DBC448BD21DFB70A34
+:109F60007F4E6B02D7239F09FEADADE0F1CECF9EB1
+:109F7000B5CCA7FD8131341CF7C57563385DDC2D88
+:109F8000E051D77187A1C146EDA99FDF02DFE373DE
+:109F90002CD0E72723298564CF25CAD7F957AA0FE4
+:109FA000F526A0BFE7E6451F2A381FEB9826432D6C
+:109FB000CDF369FE1D561DF9BD6C6D6C3FFBBF38BE
+:109FC0006DC22EE07C90DD599DE3223960720F8BCB
+:109FD000B087B36B7C2D1827BE7EADCFAD073CBEDE
+:109FE0007CEAE8B441507E72A4524CF8D72B5CCF87
+:109FF000F96D344E3DFAC1818F760B3E497730F5CD
+:10A000001A9203DC1F50A532D5467EAA3E9213F564
+:10A01000AD420FEE117E6E735FDE4D766A67BB2632
+:10A02000621F06ED6C362AF7E5FD10F34A67F8E784
+:10A0300093DE711969BE67A43C607EF27B4A7E8B19
+:10A04000F61BA1BCC1FCD1579DE55D281FE5333D42
+:10A050008EBFE4EFE2FBB8744F17CA15B63755A3AD
+:10A060000FE2C99503379FE77AFB950F890E1B9086
+:10A070000E717CDF498DDE5E4EC215E8F0A50F89BA
+:10A080000E977771F9DAD0556EC4FDD40EE1D76919
+:10A0900010F4847484FBE8BF3A93699C86C9A1E1FB
+:10A0A00028A7CE0BBA3BFF12A7B7433A1DF9010E02
+:10A0B000ED1EDDDEA20CD48F4A8D97F0DD00F8E6B0
+:10A0C00076F3DAA36867D5D73037F26B43A7E0079A
+:10A0D000B07B11BE0D5DD5CBB1BF416933C9DF0D7A
+:10A0E00076C9B441506EA863A5C86FD9BB2A5E4239
+:10A0F000BA605D7C3F9E5D03F62CD24D5ABD5B9FDE
+:10A100008F7A8FDBBDD78F2CA3F63B725D14E7F2FD
+:10A1100057318AF3EF40FB19F55DD6686E3FFB3689
+:10A1200092DDC55C09E437653E750DD66FF02F6290
+:10A1300094D711CDC72F29B40F680858291F685626
+:10A1400017B77F1ABA381F9F93F0914F43CFADE4F2
+:10A150008F7FC1C4FC11FED0375F9ACEF5EC8B2601
+:10A16000D2B39F357BD8C7B0A0B785BC9770AC6D14
+:10A17000CBD721DD32769309E7B14CCCA3CDC0F526
+:10A1800046B2D00305DBF83CD474E1774CD789A7FD
+:10A19000519BE7E2F0937FE19C188FC8225DE8397C
+:10A1A00018BA7E7990F8A4EE19DE5F9AC9537867E1
+:10A1B00004BD4AFB289A1E0BC4B8D9BB0E2A284CF2
+:10A1C000B277CDD1F0F9F5352CD808EBBC7E972EBF
+:10A1D00038651CD94D0B499EAF37B258F92A23D2A6
+:10A1E000B9FD5695EA2D44BF76D5CD3677A43FB953
+:10A1F0002AC1A3B3A01D5724FDD8DE128C1B9D4A93
+:10A20000B7BB116FE3D25DD20ED3D85B03F7DFDCAF
+:10A210000EBCA1CD3F0EF71F81F509F329AE09DA77
+:10A220008DFCDC0E688FFBF7DDD7FE9CEFDF5BB8A3
+:10A23000FF020407C999546F09FA8F9D05DEB55CCA
+:10A240003FD9DDB1D6F3AA93AFE7C0CDB716E23E52
+:10A25000B161AE8DF8E1815794A59CDE4011E2BE5C
+:10A26000DAC7F983017F3CE1227A243BAAA1C91B0A
+:10A27000884D8F9C5F1AC0AE423B1BE8710DB793AF
+:10A280006D8CF313A74BB9BF47B91569CF4A3E8D03
+:10A29000E67B49BFFD7CFF35F9FDBC81F3E37980A6
+:10A2A00003D27B3F9DBFCCE97CEB7AE047F8BE153B
+:10A2B000F8B12542FE47EF7F709EB81F90F2F61E60
+:10A2C000A777513ACAA1DD6F6DC650AB948F0D2FA1
+:10A2D0006F197E39BBCB8C95A15F33F06B24FD6089
+:10A2E0008CD65E444F3FEA09EBBAD8FE8FBBD26DE5
+:10A2F000DFCD3F3F302FE5AEF4D2817929E9A87355
+:10A30000106FBBAD01B48FA51F297A3E4B049F4946
+:10A310007CCAFD03C621B0FEFD82EF37897A8F88A3
+:10A3200067C4BE84F8C1A5F37D4879F671F4916CD9
+:10A33000F77DF9B5E438522F46D38D8CA3E07AAA85
+:10A34000C7C4AFD7B65FECCFA2E8F829C15F0B80D6
+:10A350003770DE6D86E017C48F77D819E513F8994A
+:10A360002715E371AF8DE07C34B26F38B6B766FA6B
+:10A37000BE44BA927E5D7C8F71AA5A11BFACDD6B70
+:10A3800008449E7FB93783D138BD76B35F0FFC9107
+:10A390009BE9DB87EDFD15CC1D443DF38F168A2B21
+:10A3A00081815B8AF2A691851211CEEF25FB5E209A
+:10A3B000FAD5F70C47BFE33925340EDF9F10FEDADC
+:10A3C00013C25FFB7ED77BCFBE02AD17BF726EF1AB
+:10A3D0008F91CE5EB4E4217D9CB0F4E7BF25A1DD72
+:10A3E0007D81B9922E770E699159EF5523FC67272D
+:10A3F000ECB1FD7F6F0B3C378A782B5319EDC3B757
+:10A400006770F9193EBFC4E3ADEFEBB4FE37F91C3A
+:10A4100093C1E1DF19E71C506106DFD7740EE1FC40
+:10A42000D8D7AE50BCAF66DDFA3FEB412ED4ACB509
+:10A4300007E9099FD18EAB71F8833A289F3070B934
+:10A44000047F73CD6561FD07F5D449C8337E07C528
+:10A45000BF960AFDB5ACE9CDBFA15FA14665E6494F
+:10A460004518C7F21E1E049F3EB52D4F44F1BFF2A2
+:10A470004777A6A37ECA58D426F2C1A63AD0FE5585
+:10A480003C37E82F592F676FA96427131D00DE1E84
+:10A49000CCF0F6221F2F4AE27EC145775A03FE0810
+:10A4A00079B857F06134FD7C10E7BCCD97191501E0
+:10A4B000EC6F61AAF76FD4EF9DE73472EDBC12FA2E
+:10A4C000C523485F77D8DD4FF0EEF222F363D20563
+:10A4D000FC6B310E04A2B1B7B067F8BA7CA4E3BE3E
+:10A4E000BCDFA15FABDBE4F0BBF0BB91BECB76F190
+:10A4F000E241F1E3402E23D247C34585E86169F785
+:10A500009BC751AE37A821A293A5661BE1B1E1A27A
+:10A51000CAE9A9D5703624DB03EED7A47AD232601B
+:10A520009EFE7B2725533C09F889C3172A459CE3E7
+:10A53000F832C3372803E0F79035F136DC7F5D3021
+:10A54000BB92308FADD108F4703575E73547D843ED
+:10A550002CC7AEA583EEB7FE86F35A6EF61951AF3F
+:10A56000AFF034D179B14549C152C79848BC4FD2F8
+:10A570005F1AFDF5F17E49C897F78D3C6F64209D09
+:10A58000733C6CCF10F5B239BFBC9FC76A9EC3E75E
+:10A59000287842BBF787887291280F17F5D279790E
+:10A5A0009AE097F7C7F17AD1E32C15E37C99E1990A
+:10A5B0008C7082764123D2C76B163A67C44A40FE3C
+:10A5C000A1BC5B934B762CC8B96908771827984CC7
+:10A5D000F54CA4675813C841C0676FA98BE0B3B5A9
+:10A5E0001CE805E341AF9A281E24F12BF11A8DCF08
+:10A5F0008519CA77CB4F1F18BF5E98513A307ECD70
+:10A60000D850C217D14B8CF31FF1F0F56B3BC70349
+:10A61000F0EBF20CD283C1B1917CB349C051CAB501
+:10A62000F713B478FD3C9DE3A15ED4BB84761FDABA
+:10A63000D1EE3EE2BFF75378FDB402AE97A45DFEC3
+:10A640004F022E5FA66B9F52CF44FBD1BF14F2E2A4
+:10A65000CB74EE4707BCDE8DF395FA09E44C301954
+:10A66000F878D1EB2692336C631FE5D540BDFF83AC
+:10A67000F05A64EABB3515F4CA0FC1DE311651BB7E
+:10A680004B284706ECEFC748BAB033D4DBAD190E00
+:10A690006E1F94F4F1B8D748BEAEA50CE48772657E
+:10A6A000FC630C210BE4F06B22BF42C1BCAE146210
+:10A6B0006717F60770FF978CD230DCA3C73B21E801
+:10A6C000E0D10C4525BC15B242C4DBADEF7E6E5F18
+:10A6D0000C5D9E13E765934DBE76ECE7ECDD6F9164
+:10A6E0009D7EC2181CDE668BF1DD187CEC2125FCFA
+:10A6F000FDB6A7F47EE3D5987F7EF6C19B61DD4B66
+:10A700007BF46E1C72E93D5FBC331EEDEC1E03C58D
+:10A710006B40DF6F5371DE4DDCAE3CA1D3D2C1671D
+:10A720007769F73DAF0B7A90E772A5DC91FA7C155B
+:10A730007373799390B81BCB1FDD713B9DCB5DCEBE
+:10A74000BC873D00F7D36B66925D7C3BF3515ECFD7
+:10A75000B256ED39DB156DDAF2ED3B079CC32539B6
+:10A76000BC2A10FD5EF8A52B63EBFBF3822E3F3372
+:10A770008AF8FD7A53CCF8FDEF85FC09C7D9FBB404
+:10A78000F1FB572F1FBF6F8C8ADF87ED88E8F83DFC
+:10A79000EFF713616F60BF9171FCCF2A62AFE3A343
+:10A7A0000C69B75835F9199F0CB05B12E97BE3458A
+:10A7B0004B9CF9D8E8FD672B638FD3D73F8E365F6C
+:10A7C00020DC9EE709C8FDB5A493C68B59A4676534
+:10A7D00059DAC7E17639F43DFABCBAF46F4BBEF8EA
+:10A7E0005861E62CF2476D1776BC9BF2333F46BBAF
+:10A7F00008F972BAEBB5104C71D98F270E578784C0
+:10A80000F9267A1D405F674211F2D898694F23FDFF
+:10A81000EB666E3A9727E8FED6BBABE87CCFFFBD70
+:10A82000A73223326E2AF7530D46698FD934FA9630
+:10A8300045E9E3655D6F911D06F6D770143E7F7A9A
+:10A84000F56ED2C32B99371DE9BDF7D511746EE5AE
+:10A85000DBEA61399F9BFC4B0C3CBF358DEC8739A3
+:10A86000623E3775733B5067F618681C0F7339D218
+:10A87000698BCDE70B425485F275FDF347E71D6305
+:10A8800093C4FC156C0FF0BD4E3CD9525F26CEDB55
+:10A8900084E3EA310D269089CF96896E173EA7286A
+:10A8A0005E95CF83E3791A6BCAC1FA3A7348CFD762
+:10A8B000093348C7F6FDF0A2B25D9437CEBD70EB08
+:10A8C0000A7C6FB3933C318A794CCF04B988FC6D14
+:10A8D00066665CB7C9163C4DF133F1F457B8888F02
+:10A8E000FD4318F9411258079D3FB5D9CEF971B112
+:10A8F0000EE650B06C715C08E27EE29CC3E6C7F3E2
+:10A90000C4202F6765A23F5FF9D54AC40BC867EE24
+:10A91000178AF75D0DF2F31142DEA588F9B50879C3
+:10A9200097C5DC8AB8C780E4DDFDF69537E07E2662
+:10A930008D79F7A3BC7B387106C5FD32988FE693FD
+:10A940003A43D5C82DA7575BCE98AF46CB3B05E71A
+:10A9500097E5D3BE37B3139497A404BD9997526972
+:10A960001F3612FD310621378E59783EC26631CF2F
+:10A970003B3353886E8E59785EC2B7B65BDCDA7DA6
+:10A980007D430A3FBF7F3EDD6CC6F1C08EB913E147
+:10A990000776CC077E16CEDF2C9CD24179029B6FC6
+:10A9A00054DC1BE0FD66BB6BBD0AA4EB9FA9707F66
+:10A9B0008FEA28C77C9CF63C871BF3441B45BEF7F7
+:10A9C000668BA3F619F2639A783DD6B719E396ED34
+:10A9D0005B1D0EAC9756D937CD88FBAA15CCB19B21
+:10A9E000C5A0F7AF808F60BE3FC732E04911F46366
+:10A9F0003DE2BA85D620BEEFC17F17F0F29432DC7B
+:10AA0000BFF2BF82EE423A77C93C7AD2978DDD859C
+:10AA10006FD860BC82B985E4AFF756F2B82F1372D5
+:10AA200060BC1C57F0D9B561BAA7EF85A23CB45BF6
+:10AA3000F87FD34C3CAEEB8021CAC49143AC9FC697
+:10AA4000F9C1CDE41FE7D36B58F80FFBAB0CF74F00
+:10AA500072696AF87398EF60A822B3BBA50EEA8DFD
+:10AA60005783FB91AFAF15CF42F13C547E23E9E50C
+:10AA70001E9DCD65D4713E3717A0ABC3AB47B894CC
+:10AA800039B6B4603FD729417AE6CDD8DE82D39F6C
+:10AA900023FC4CC999C6009E376B99007826BFC825
+:10AAA0009F0FA3FF5AFF2FAC18F174CC20F59E27FF
+:10AAB00089E7FFB9683DD50E3E5997CE337B2EC24C
+:10AAC000F9283FCFC6D0748BF8FE97A9554997D780
+:10AAD000BB3C0F30254BCFE5E30C1E876D9C6FA66A
+:10AAE000BCE546710F03537DF93F8CF0AFC8B8C584
+:10AAF000BB06367F5F8CFD464A16B707E6DCC0FD15
+:10AB0000C28D221F477E4FCCE27EB2BF644E7B37A0
+:10AB100093EC3D1E6FFD9D945F23D948945F11F225
+:10AB2000E58F245FCADF8E277FB4DF85FC99E72994
+:10AB300036D0BE40C82129EFBD22EF6801F31810BE
+:10AB40004F3DE21E95A3E5AB480EDDCC7CF4FEF74D
+:10AB5000153CFF0008D380FDDD34436B3FCDF36A25
+:10AB6000CB37CF8FB6AF383EE4B80B7CDAEF73A4A7
+:10AB70009D3C436B272FFA87AF9249CF67FCA2FE1B
+:10AB8000D2E0703E5163543E5183C8276AEC2A3CA0
+:10AB90009416914FD4D8CDF3891ABAAE944FC4ED20
+:10ABA00029AF29B01FE324DE5AD294EC0D917F72B5
+:10ABB00010F34F8AC2746EAFB0F33C0CE6A1BCA296
+:10ABC0001C8795CE5DB4EA8AC88FDB9A68D7F8DD1A
+:10ABD000B7AE7755613DE9BF95F9434837B1F6C344
+:10ABE000D9597C5FB343E17E74FF0233ED3B9D0591
+:10ABF0005E4D5CC1A967C7D1AFF86EA64BD6273FA3
+:10AC0000C90E832FAB189E0185D17989FEF67AB6DD
+:10AC100091FC905172CA99EAA6388033692CF9F5F3
+:10AC2000E77517923F92D92CEE614AB8FF7973DB32
+:10AC300055CCEB69EC6E5797DBC27437364BEC435F
+:10AC4000ACCC8AF4DAEFD77BCE447EBD6493B730C8
+:10AC50000BDAD71983E4BF8BA0577A1F4F5FDE2E24
+:10AC6000E8C550E15DB002E6D7FB8ED18DFB6B0AE3
+:10AC7000CC41FFCFBF944C7E49750E233DB5B19CAE
+:10AC8000CB935EF493C13A3E4DE6F7FA6CAC66A402
+:10AC90005FCFA74C233A5EC502873DE847DB0574CA
+:10ACA0001879CFD21E6DB98E7590FEA97B66003DD6
+:10ACB000937C94F2B89EB9F4068C1B746ADBB3A142
+:10ACC0005A395C28F447F1BCA92D98FF50ACE3F247
+:10ACD000912D770F9A43FBF5458E4F2C28727FA15B
+:10ACE0005CCEAEEBB59FD273FEE77AA154F41FADF4
+:10ACF000BF4A853D3719E417EE6FA57D06F5A97C9F
+:10AD000050D7ADCFD485E75922DA49BB50EA0B8939
+:10AD1000AFF2098CE179B5BBB2847C1AC28620BE41
+:10AD2000A17FE21305375829D4BF1FF785D78AF1D1
+:10AD3000801EFCA8BFFD3A7300E96BB3D244FAD27F
+:10AD40008CF63F3CB72A3ED20BFF5EE3D7237D4C07
+:10AD5000644D37DD00F526997BAC28B7804EFE3177
+:10AD6000927E5A58306F9FA2A123FA7E36F9ED9851
+:10AD70007424F55AF0F7DC9E99C5BC74CF93E70FA5
+:10AD8000DCEE3AA8F07D26D89F07D1EE7A5B3793A8
+:10AD9000E864262C03EB5539B4F89F9EA92D47DFB4
+:10ADA0000FC5D05A284374487806549C4FF4BD51BF
+:10ADB0001E29F79856EEE5B3AF78DEF896C33F420A
+:10ADC000FF83751D1B89F60E58AAC48FD1F4B027D6
+:10ADD000EB7B8FB7ECC98A116FE9157EE56B58687C
+:10ADE000E533CA407A3B7F689D3E33822E257FBC87
+:10ADF0006CE07913CAEB3CAE35C1CCC604112E25EC
+:10AE0000DCFF28F9E31AA4D39430FD9589F787A4D1
+:10AE10007C19CC0623BD5DD76509EA013F85A2BF39
+:10AE20006B90FE8AC2F689DC77B44C184067F998BB
+:10AE3000170EF64C01D295B44F8A958E163CE7FD5D
+:10AE4000FC4BF7B6E07C23E8EA2D84C35905E88A79
+:10AE5000FC6A03F4ADF67B14DD49FC4B7BBA9C35F0
+:10AE6000D17E676E02D7B3C1EADB49CF82B824BA7C
+:10AE70007B730EA7BB2AE621BA2B675A7AA9346BDB
+:10AE8000CBD1740923EAB474E723BA8BA6D77874BC
+:10AE90003718E94EEADBD42BD3DDE74877DFC58FDF
+:10AEA0003990EE3ECF72C6A7BB687A93F26C9FC50D
+:10AEB00051897675638D42FAA1F89DA12D581E51D6
+:10AEC0009F4F76F6BE6437D9DD8D4DFC7B498F47A9
+:10AED0008F7933056BC5F77C6F25961BD7C177E853
+:10AEE000BAF418CFAB197A0FFF5EB8A1E90DBCBF59
+:10AEF000A0D1CFDBBF7C7A339D870A6C16EDCBDB0C
+:10AF00002AB1DCD8CADB7F8A71AEAB31BF2DD082CB
+:10AF1000EFAFDA96EFE6DB6F6ED74F11EBDDA73CB4
+:10AF2000F706B56BE3ED6E3F6C4E60E427E0F6FA92
+:10AF300064B1CE29BBF83AD33EBE7E860BE86345AA
+:10AF40009F9FECB94F74756524EFE2ECB3CB95B6D7
+:10AF50001C7C4E4739A647BCBB5BF543781C743755
+:10AF60000C717536F7D3C8F821E6295447D817571E
+:10AF700067733B44D64B4F61747E8DFDCC4EFE72A1
+:10AF800019DF0C3EC414D407B8466197C48C774EC1
+:10AF90002F6822BB62FA6019E70CA94B61DCC24B37
+:10AFA0009F4F8BE5472ACBE6F6F329917721DFD730
+:10AFB00004F2754817FB9048E8FCF09077D09EDBD0
+:10AFC00097CC34E7DCF6E5F3F2D4ECBC7F6ECD0130
+:10AFD000F8EA9A54BCF78BE52994B7F2831E164C15
+:10AFE0004A1C38FFE92A0B1A290F8ACF7F658B513B
+:10AFF000DC57C2E5DA3C813F366918D1EF5C81A7A6
+:10B00000EA6CA1178B5931CAA979026F3F343719FD
+:10B01000B8BE6E3344C98F79D9283F1E8E6BCF6B73
+:10B02000BF47C9971A31EE4A61C7AF627DE43FFD61
+:10B0300044D8F1A71EE676FC6AD641FED3DE9F71A6
+:10B040003BBE1E9687F412ED07ADDDAB2DD77768BA
+:10B05000CB0DA0DEB1FFC6AE28B93386FBA57B1FA2
+:10B06000AE2F433F64CDCE77C8FF5D23E54C402B28
+:10B0700067C040E772E6A151E4BFFAD6F2E319D8FF
+:10B08000D59569F24BEFC97646F8775EE4792E0DD7
+:10B090008CFB117AED236FC17D2C8BD24FD172A521
+:10B0A00050C815E9FF90F25BCA9B42C6F514EC77D5
+:10B0B000DFF1609B283BEFE16CA1AFC4FE4DFA4D80
+:10B0C000A47D5488F611D2D7A82622BAB07E72BFCA
+:10B0D0006DD247E8A5052566C47B9119F81BE1A64A
+:10B0E000B78DF5D934F4F168F6E5F783DAEF51F46A
+:10B0F00023F7630B05FDDC84911818FF0F721FB84E
+:10B100008AD3CF5CE63D84F4F3FBD59C7EE4BEF0AD
+:10B110009BEF033DFAC87DA0DC4F7EDDFD603FDD87
+:10B1200058C03E86E7B15CE917E0F1FD4685D3459E
+:10B13000FD9CDF3D56C5C2F2E2683373AB8670B941
+:10B1400065A6C98C7E971603DF2FCD99F57ED9D2DF
+:10B1500008F913B4971F40B8B16E27F977EBADDA51
+:10B1600071362B3D77FD11F7558F5AC9AF74E10841
+:10B170002393E5C2AE11940FFE9981C75BE57C6E07
+:10B180003FBCF7B510D45BB9EE9662CC2FA8550240
+:10B190002FD6C1B70FACBE7791BF6B7541712F67CA
+:10B1A0000FC527E4B8F1FDBA7E92C7C6035C3FF72E
+:10B1B000290994DF0BEF8747C6E9FE3888CBEFDC1F
+:10B1C0004CDF07B81EA9475BFAF327F813B4301B0E
+:10B1D0009412CEA708E74D707FCB5F98E78A79136A
+:10B1E0001B23E204D03E66BEDB7921CF47617201AA
+:10B1F000CC6765BAA717D77F4AC4854F8938E2A9BB
+:10B20000441E57FC7B7F7DFEB40DE27AE894883BB8
+:10B210009E4AD1C69B64BD44F13CD96CF66E346045
+:10B22000BC9E793782FE703D646AA27C95451C5FA6
+:10B23000BD2F256BEE11C81A543E6A10B4FB99D38A
+:10B24000AB1F04E32C6FD39E83EA15F7DBF60ABA33
+:10B25000E9B5F0A71C376B50F5286CD7BB80DFB37E
+:10B26000DA5F9E28CB5EEABFF7BA10C9A3FEF28F61
+:10B2700042E29C3AF793C8F840BCF86174BC30FADB
+:10B280009C6974BC7FB1E43711EF5F24E4D4E26EB3
+:10B290001E6FB8D5CC360F82EFB7756750FCB82655
+:10B2A000D13F5C13EFF75BBF519E87A4CFDEDC9EDE
+:10B2B000FEF8F8CF22E2E3F5223E5A2FD7D7A95D58
+:10B2C000DF6401CFEF313E3E799073607C3C3A9F62
+:10B2D000E245B4330C613CAC7170B855E9EB2AD14E
+:10B2E0004F7C6139A33CF7356F2D6B413FF29A2DAE
+:10B2F000E296556177D70B38C75B97D3AB632E8D3A
+:10B30000BF3E81B922D693E54BD194C9928FC83301
+:10B310001D5493AD699FDB3444537FF0BA519AEFCB
+:10B32000F9FE224DB9A0F51A4DFD616D159AF2880E
+:10B330009DD76BEA17B22149E46F3BA2475F12BB6E
+:10B340002A3047F37DF4DE859AF69FB2A61D93A0BE
+:10B350005EA7457B2F33F37B7AC69485F3A9C77626
+:10B360002CD5F4C3824A50290BDF33F699B8A7795C
+:10B37000790F8F875CDDB55A334EADBE8EF0181D48
+:10B38000EF2D627DE4376E0828EE201B18FF5DD597
+:10B39000D54EEDAE64F7C878C8C64122DE97CDB26F
+:10B3A000395D47D3858DECC30BBBF4E47F2C64C3BC
+:10B3B0001F9A44F032B0806B20FE2E30EE17BBF0A7
+:10B3C0008CDD8D7945B7BFB58CE663CAD4D205DE76
+:10B3D0001F18B95EEB482D5DD8DD5A3A489AA0A5F2
+:10B3E000836878277BB474C142F0BFCBC03B7586BD
+:10B3F000966EFEB7E0DC81F0B586E15B7CD0D3626F
+:10B4000023B8F1BC35699F99843D141DD790764EC1
+:10B410007090B0BB453F322EB159F1935DD51F7787
+:10B420009C10CC0BE6A33DD5C4B85FC97B10E56F7B
+:10B430000CBF24BD8FE79794709D9BC0F5672DF3DB
+:10B4400092FC3E66E1FEA493D5ABC89FB4923591C1
+:10B45000DDFDD99CE9C2EFE8A77A57CA5318909F3F
+:10B4600000F6298BF0D7AE068B1AEF1F8A86A7D27B
+:10B47000AD04ED786E98754B7DE0A3FC150FDEED05
+:10B48000A989FF68ED5FE65122E597B487E5781258
+:10B490009E52AEC9714CAC499F897C1125E7D8C832
+:10B4A000E8F893D69F23FD41328E23E34CD1FE9BD7
+:10B4B00008BBB8558F71D2C1F92D78CEB7D8E1212C
+:10B4C0003F6129EBB905DF4F3077B4A82EE1BFB853
+:10B4D0008AF5FB2FE2EAAB2BC4B56FF22BA147F242
+:10B4E00007C6B3657C1C96FFF11FA1F124C5958B9F
+:10B4F000F398F3F20827D2D340BFA6FBF82BD08FE6
+:10B500005ED7978AF5AA30313D22DEFDA612A2F55C
+:10B51000FC907936459EDB6F601DD36E217F32E84B
+:10B5200049BC27A793FBBB5857B43DAC92BF590702
+:10B530002B41BAAF651171DEFCF0772AEB079665F7
+:10B540001ED295EC89A7F18272CAA3E0F9534CC8C8
+:10B5500041B9FF8CB7CF93F918F27E4F9977549485
+:10B5600023F8751C1B87FD03BF95E594A27F01F8A6
+:10B570005389E4C7FE3C25FA3E801FA3D62FF33142
+:10B58000F4F612F21B2D8B5CEFD78087B45B7E9CA8
+:10B59000C3E8E9C871D1B33EE1C46F3DF8B9A4472F
+:10B5A000933FDA68840D0DFA135E1479811D5ABB3E
+:10B5B000FD961C9D801BDFF75C095EF1F121F2F81E
+:10B5C000043EBEAE1D26F3F8241C970C84FB0A0D26
+:10B5D0005CFBF78FFD705F110BEE122EE74A7B7E4E
+:10B5E00081F8D2DB8FA523BC17A67A5763FDDCE375
+:10B5F000A14F145D785E55FAB394877BA14B4FE75A
+:10B60000FF1AAEE372B0E1253D8986F3DD268AB3E9
+:10B61000D674BD4176E1D96610B406FCBD0C187233
+:10B62000D865FC0851F08EB74F92EBD99023F6E520
+:10B6300062FD32EF07D6B93927665E473F1CB4DF9B
+:10B64000051CAAF46392F01C597FBE92DA97177911
+:10B650005F5FF43A2A7278FEDB29B3F73EECEFC362
+:10B660009E9C1DD85F95BEFB7036C267AD42E7BB9E
+:10B67000A698F879DC2C715E6F42A8C98DE79933E2
+:10B6800073F87D66237EA4F7621CF9FDB577A6E00A
+:10B690003934D9FF084547E747197BEE837F2CC132
+:10B6A000F8E62237DE6FBFD824EE2FBACB1A2C0073
+:10B6B00039F2BA91DF476518D244E766FA92F5E4A9
+:10B6C000D74CD3B3A9487772DEF2BCAD7C8FF701BB
+:10B6D000605EB17C3FA5A5AF780DFA7B043DC875CF
+:10B6E0004FA9EC2B6EB285E12FF33CA3E15325F873
+:10B6F00043EE431BF05E5BD0BFE7CDBC1C7DAF6D5E
+:10B70000FFFE7458FF3D36F6C8B87E83C593341EDD
+:10B71000F951DC6BFB17872789DF77A4BDA7F6BC3F
+:10B72000C8B797BF5312EFDE9BFFCC51BE977B8209
+:10B73000E2E585CBBCFF7870694856997A359D73F0
+:10B74000F75EAEDE2BFFAD8FB9DFBE28BEF7DFD3CD
+:10B75000F96AECBCC55EB1CE707E6188CE29F7E790
+:10B760002DBE547ED97B471AF03ED20838C8BCF6AD
+:10B7700006BC8FB43846BFD09FCB76E57B87AAC482
+:10B78000BC1A308F3035F23DA7B7F03869222F3020
+:10B7900094887CFBCB2E3D9DE3FFE511DD8CDD31F4
+:10B7A000E69D9BCBE132CAA9121F8D0EF2FBB5E3D9
+:10B7B000D593E779E4B9D8E8F97556846EC5F9638D
+:10B7C0009E72ACF11CB97C3F2BE7DD99C2F1D1F040
+:10B7D0009A89DF9BAAF27CF2CE94D04AE2138716B4
+:10B7E000CFC3041E3BAF0FE5D1B9B299DCEF108F88
+:10B7F0001E26A7FACA51BEC87BEECAD426C511C1FF
+:10B800008F57A28730DCF51ABC0E84BB91BECB7E6D
+:10B810004F1F157CCB3C36DCCF2D11FA6EC99E5ADA
+:10B82000B287E57EE9F44E3DE56F9C663CAE72BAA8
+:10B830004DA1FDD0521F63EB402EAD7CA27833AA00
+:10B84000AE2599B09614FE1E7F1F66E9C6A8F8BA09
+:10B85000D85F49BD2AC75FBE4D6B17D7B06D7F4615
+:10B86000FBE9F4512E3F56B026D23F2B1FD0F6579E
+:10B87000B367D6A738CFE8BC8011C28F372D57ECFD
+:10B8800057CA5819EA8F354F7C6EC49F6089C71715
+:10B89000F8FB4F4387F1DF7DC227FE8E083E6FC95C
+:10B8A000F5FC2017FD3EEFF2F9AECEF5CDC9457F90
+:10B8B000C9BB7C7E17EA2E703DB32B8DF45B8BFDEC
+:10B8C0002E92FFFAC15CFEDF8BF735009C4C26718F
+:10B8D0006FBAAE499F48F64D80E8EC43E71D737E92
+:10B8E00040657726F243DAD3D36760BFCEA7AD1E9B
+:10B8F0005CDFD6724F21FA2FB656F3F3A166138F91
+:10B90000DF077E39F100865386766CAF40179DA322
+:10B910007B7F10FD42ADBA3F1FC6BC98D6C93C5FC5
+:10B92000325D17DA3F28623CA7359089F17DE768E0
+:10B930007E6F4E9ABEBC90CB7F6E2736085C5CE86B
+:10B940002A207F62AF41FA173B2C742EAB8EFF2E5C
+:10B95000C628C6F12FF3EA700E9176F1D966A6F9E2
+:10B960009D86511D4AD09048F7A8503CA86E4330A0
+:10B97000FD16D4674FA9144F93F34B7B3DAB02E305
+:10B9800066528FDDA238B8BF4DD8FD0B98FCE3712D
+:10B99000B7F9829E16087BFF162B87F752E6CEC3B7
+:10B9A000760BCD2C5107AC764B654729ADB3D690BD
+:10B9B0008C76858C1FC5B74762FBC91A7E61E7E7A5
+:10B9C0009E95BEE1D8C919F4415D863FDB853C698F
+:10B9D00018CECFFFB1A1CC83F1CA86D746D0EF30C5
+:10B9E0009912783C1CE49619EF113A84FA1ED6BDE0
+:10B9F000EA158BC85B0A8873CDFCDED8C639394599
+:10BA0000741EF1781FDDFF71DE10CA23FE067984F3
+:10BA100037A6BE92FBBB1FE0BDEB0DD960D741F945
+:10BA200074EE9F7879486825DE1B9992778997474D
+:10BA3000853EC1724E5EC26C2A178556EAA13C3E15
+:10BA40002F939771030A0436356FF06C3FDA2DC9D6
+:10BA5000C22E7087E8BC77C3CB237491FE58771E43
+:10BA6000976767843FF94C3EBB6D0EC27B64ECFA6E
+:10BA70006979D2DE6EA3F5C9F5CAF62C3376BBFF21
+:10BA800010727E9538A73DC5CA5A2D3CFEE74F047B
+:10BA90003C1CEC1E41F1CB7FCD4DE1FD3B42744F90
+:10BAA0008FEC27FA771CE4B8AB15FE7B59E7A3F2BD
+:10BAB000BC7E97CBE52B8CB391C619EAE1E79BE7F7
+:10BAC000E41422FE006FAAC09BCAF7C9ED7C7ED0A9
+:10BAD0002FFEFE13E88762F4FB1FFC0AEAE787E704
+:10BAE0001D4D2727C538AB5A78DCB62FB980E869D9
+:10BAF0008A55DCF752A25DC7F83C6E9FBAF392C537
+:10BB0000791D09AF0C85C6691170CC090D9F33F6FC
+:10BB10009BAFFBAFFF4BEB8EC09707EF6D39D8C5DE
+:10BB2000EF371E9FC7F185F49C4276E0764D7F6724
+:10BB3000D647B59FC0285FAE21A580DADF2BEE6F18
+:10BB400095F7D961BBFC71DCBE45BB57DEA7C1FCD4
+:10BB50009359641CB2FFDE8C0E71BF70FF3A6F28E0
+:10BB600011EB7488753A22EF33ECE7CF637D79737C
+:10BB7000ED03E9B81FFEFDFD8D2912FD69F83C5665
+:10BB80007FC8D7F1F072551E9727DF1B5EE43CA3F8
+:10BB9000E0D90FE7A8F94978227F53BB315ABA940C
+:10BBA000F3CC11F43980BFF3BFE578E27ED9FABB5C
+:10BBB00079BE387369E9BABE335F87F909B2DD0728
+:10BBC00078C0A034EC27BC214FEC2773584E9CBCA6
+:10BBD000476F9E33A67F91DE47EF277B93E5EFD932
+:10BBE00069FD1ABD4EFE7B39FE73FC7E836BA3FCA0
+:10BBF0003C188F7ACE166E17D62FDAF263027E03C8
+:10BC0000FD547D7938BF1253C5F3F83B5BABF34A63
+:10BC100067AB6077942455DC990FE5A6C7C693FC03
+:10BC20002E1954F1793EC8F3358F4DE0DF47577C2C
+:10BC30003E04CB791379798AE77994F760B4CC9E86
+:10BC40009A15B62BEECC73D1B8FA4A1DDD6B67425C
+:10BC50002306D6637ADD44F98012AEF19E25265D77
+:10BC600053ACF3BFF7F4D3038FBF4CC07FBAD01FE0
+:10BC700028FC052155E32FE84DE4E7CF7B5FFD92DB
+:10BC8000CED7DC9BE75B9F07ED1BAD676FCD87F2DF
+:10BC900006EB0714EF533C6087A01FC6E5608B607E
+:10BCA000BECAD9AD5EB49FD86AB75925B80AFF1885
+:10BCB000DEA907F07BE5B5A77E3C880FE3C5794C8C
+:10BCC0001472A0F1B5BFFD15E3C48D676C6E341B13
+:10BCD00027763F7C27DA5F13BBDFFE1BD7C3FC3C14
+:10BCE000909CF744F47FC2FB095D269AFFC4EEAB3B
+:10BCF0005660FD6BDFEB2E403AB9EE44B005C5420D
+:10BD0000EFABFF3E48730E887D7AD97CD1B8F1390C
+:10BD1000098F3F01A093081E3FE7F0F88AF2D9CEC1
+:10BD20003B8F6E0E9193547BDE0AEC788A3B5F600A
+:10BD3000096E8C7BC873FDD17ED5E3D5B03E787F8C
+:10BD40005D1FCC20C29E9E72D10C82245C2E67C9DE
+:10BD50009A72A5394B53BFCA91AFF93E3DF32ACD34
+:10BD6000F799AE424D79D6C8899AFA37BACB35E5FC
+:10BD7000D913666AEA577BAA35E5C26087A67EF1C9
+:10BD8000912EEDF7634C8F78283AEE7E039FA5271E
+:10BD90003DE49E2D3BD5F4063E27FE858323DAAF96
+:10BDA0007CCDC58E37F0BDF42B479F9F927EE69BDE
+:10BDB000F5B68031B63F39532D08DF83A0D7F1F3B4
+:10BDC00053EF25FBFE807893E7A7A6A05F1990505C
+:10BDD00075DBB99FE2EF325C58C4FD6EC711319438
+:10BDE0004F6E277FE57143D3B37FE47903B928F71A
+:10BDF000AEEB9BAF59F7948B3ECDBACBD9AA283C7A
+:10BE0000DDA1295739EED6D49F9EB95EF37DA66B8E
+:10BE10004B149EB66BCA37BA1F8EC2537B149E9EBC
+:10BE2000D27C97F4DD2DFC5FAFA1DF0A9E93423DEB
+:10BE3000958887C9A7FA081F137ADA2A114FD71CE9
+:10BE4000EF207C9504BD95282ECB8E34BD81CF206C
+:10BE5000ECCBB0DD81E64C7A1E6C7691FFEB70F393
+:10BE6000487A1E6976D3FBFF689E40CF5F357BE83A
+:10BE7000F99FCD33E8D9D3ECA567477307D57FAEDB
+:10BE8000B98BFBCF52FBEFDDC845BFC1795DA8017F
+:10BE900023C68EC15B499E9E4F089DC7F2067FEB6D
+:10BEA000ECA92034F0671D902F7F209E452E4FFB7C
+:10BEB00060780E1ECCF8FD19227FA343E729443B8E
+:10BEC0007CF4E30FDEA7E632B669BD37137F3A187C
+:10BED000CB662813B2E9F7901EBCCF93C3D8B3A8A2
+:10BEE0004AE8BEF7076763B957FC9EE7E0C71F241F
+:10BEF0003BFC5BC7D93D03E2ECA307C788B33F7B9C
+:10BF0000CA65477FCFD1AF46D8111E4785DFCBC367
+:10BF10000A0DF83B1CE56AA101F5ECF138E7215464
+:10BF20005379C9E0525CB77B1EE5915F6FA0DFE1FA
+:10BF30009BA3F0FDAFAC97ECE2FAA0F74613EDA798
+:10BF40008EE93C2B903F7A95BEC710CE373DFE144C
+:10BF5000E9A95E7B5F1EC2AFFAF1BDBCECEC7B4C85
+:10BF60007147940D1C3E958F3F39DB6FFB5EE133CB
+:10BF70001BD7110D9FB9831D7C5F11F4E4A21D2016
+:10BF8000CBC7AA3DF514572CF70CC3751CF59A388E
+:10BF9000FF7AED8161E437F294CE8BF0FFF40C363A
+:10BFA000D0FAE7A2DE443FE8427D20D6EF159E1F7F
+:10BFB000CCED3DA213DC672EB0D2BEE0988EDFA39D
+:10BFC000105DDFEEE2FBA3CFE2DC879C28BE57DCEE
+:10BFD00054FFEC0BD05FEF5A0B75DDEB1D41F658AB
+:10BFE0006F13401768BAF754D339FEDDE41620A169
+:10BFF00038EF2DF82FF8FE6CF79D5FFC06EA7FB056
+:10C00000D6EA261DE21845F05B282A2F4E3593FD0F
+:10C01000B4784E6E05EAC55B44BCF056BB9A4E61DF
+:10C020004335D9E8807E96DB0A370304D9CAB46A5F
+:10C0300023FE64534DCE1D9BF1B97AE87623F25866
+:10C04000DD987D9BD18CAD07162E25F9177AA7199F
+:10C05000E675DB3ABD8BEFE7E4F9DADA6F94F722A5
+:10C06000E9F798C84F0220D07E35C9A568F649493E
+:10C07000824E1F182CE23163D9D84BDA78D74EE4C0
+:10C08000A3B38BDF191E271EA1FD2EECC7DF8A7B11
+:10C090009EA3EF4F91E33A5C7CFF75CC089489F640
+:10C0A000E442AE07C6CDFF7C4329AC7F5CB7434773
+:10C0B000790DB7D5BF8078B8D025F068605DC84FDE
+:10C0C00037F9977CF01B424C9AE6DCF095F4A5BB5F
+:10C0D000C75119A92F4B42DECA487D39A1AFAD1215
+:10C0E000F5A2D48FC1E61A218F9B488E1E6C5E4745
+:10C0F000E5C3CD7E7A1E696E15F2B88DBEFFAA79B2
+:10C10000A790C701218FF7D2FBEEE6F9F47CADD9F9
+:10C1100047CF85A9BED7116E328E3BD7ECA3BCDCCE
+:10C12000430F9B18C6F12E749B288F0338E2B1474A
+:10C13000D2304FC944E744A3F395A2E57C3F3D7458
+:10C140000EB8B7E56DE4F7FE3C23B41707C7A7A701
+:10C15000A3CC6547B9F4F1E0F324878EBA5C76B4DA
+:10C16000A74F3E2ECA1E97DD00E53F0DEE25FD715F
+:10C17000D4E7B29BA0FCC9E3BDFCBBDF65B740F9C7
+:10C18000D3C17DFC7B8051D0FFECE02F488E9533EE
+:10C19000E520F247A5397F2AA80BD0D7E507912FD4
+:10C1A000A6672E998A7CB160B08BE872A66BFD41C0
+:10C1B0002CCF1AD9AEE215151E5BE1466C5791568D
+:10C1C000AD62BBA939776CC476D3866E5723DBCDBD
+:10C1D00018B36F23966F70B7AB689F2E4039561A0D
+:10C1E000EE4796E57729A7653EDDD5DD5ED207E30C
+:10C1F000BABCA40F245C2AE6566F42FF676397E23D
+:10C20000C0DFA5A998ABF4273360EE6203DE930A82
+:10C21000F2FAFF3DAE77AC87753662F91A2AB7ADF0
+:10C22000FF06FAED7F00F6E231E800800000000032
+:10C230001F8B08000000000000FFD53C097854E582
+:10C24000B5E7CE9D2D64924C360842E2649924965F
+:10C250002C43B6261064480CEE3001F944651910E1
+:10C26000C2164804EB17AB7E191A17E0698D6BD123
+:10C27000AA6FC4B5AFB6E461D458091DAA52D287DB
+:10C280003A5510B47974A488F0999011DC78D2C72B
+:10C290003BE7FCF766E6CE248014FDBE078693FFDD
+:10C2A000FEFBD9CFF9FF5F008053F8B3027F603403
+:10C2B000FE38253D8C046804F167BFD16DB295034B
+:10C2C000AC34078CA0A32F41A3AB1060AF0E9676C1
+:10C2D0001400A424C3FC7A0B968DB0740B96E75D12
+:10C2E0006803480568DABA206E8185DABBE36660C8
+:10C2F000FB4517E2AF38CE52056E54E0930AD49B4B
+:10C300009C89344F9A4DD21FCAC76F8550784A0610
+:10C31000E8B79A3DBA048044937BAC0DC7ED9BFB14
+:10C320004E835887AF88D6316CBD1EEBE300326C6C
+:10C33000561E1FCA8219545E09ED46C846B8F5CF8D
+:10C34000FBA422DA97C52723844E435F205FECF9D4
+:10C350005416FE63063D54E07AE9036E6999D7707E
+:10C36000206056EAF1673974EC706622DE5ED47E96
+:10C370006F04BF18BF43FB7D15E28DBE377569BFE3
+:10C3800003545B0F8D433002CBB8DFD912FE5E85BC
+:10C39000FF0D8F874967C0C3A4A1F010B51FF01A25
+:10C3A000418EDED70ACB6EA673E4BEC09DCAFCD117
+:10C3B000088121F7A7F245F4FEDA05FEF502FF2514
+:10C3C00036E7745A5FDDFC389053008E6D35794D39
+:10C3D00099DCFFA93D2944179375832D9A3E5B5B39
+:10C3E0006783DE00B0ADD5CDD0D7BA14F476803FE8
+:10C3F000B53673F9ADD6162EEF68F530DCD9BA8EA6
+:10C40000E15F5ADBB97E57EB462EBFDBEA65E86F8A
+:10C410007D91BF5F3B7F6586DB124DFFD5C9CE4561
+:10C42000C48F9E7BAA13993EB8F753C8AB9E1AC817
+:10C430006FB644C30183659D94C0658F11F7E1D940
+:10C4400016E36DC37DFD738CBB89C619A8097EAD4B
+:10C45000437C434A80F1D030D2BD9ABE4B461C3A51
+:10C460008966F5E412FE0EEB3CBF0764D9569BD3F8
+:10C47000A5473E381A8F551700DC82650FCEF3783A
+:10C48000AAAB85FA417EC048E39CA23F93717C0928
+:10C490006677F03A10A21C0EC408E8B1492C8FD17F
+:10C4A00050C8DD40BA9FF960E0E91319B68233CB7A
+:10C4B000C570F8A893AB039E32A46765ACC384D55E
+:10C4C0007D12F8A412845346D6008ED3976ED413EF
+:10C4D0009C14445650C7C39FC9DF226386F1CB1416
+:10C4E00048D4946BCDA335EDEBAC999AFABEF45CCD
+:10C4F0001EFFD2B48B34EDFA46579AC5BC532F2396
+:10C50000D865746F5C80740956991C9BB0FEBD9809
+:10C51000F822280698161BBF89E07B31195E6A371E
+:10C52000EDC0C914C07D4E937D238B105597DBC69B
+:10C530006BC7ED995363C37657E65769D721C12579
+:10C54000B4DFAB1D5334DFA7575EAEE9EF32FB9388
+:10C5500008ADF5CE7ACDF7C696AF419F0C30B1E568
+:10C5600024E84B01C6FB3A34E394EEECD2B41FBF8F
+:10C570001B6412EB927D8E3709961F74CAC42A156C
+:10C58000879BDF2458F5A53F83F6014EB059519F94
+:10C590004B8ADC8347023D962729E5CAA0B72D8147
+:10C5A000E87012F2F548BF8930C2216363A9F2BF77
+:10C5B0004E101F4C5220003207F6AB164B80793AD2
+:10C5C0008BD798456A05E51BF5C106C991A6473882
+:10C5D000470E5450F928048A08CA3A979EF86B2AE5
+:10C5E000348FA5B209DC69043F4874BF4F7CDC2F4F
+:10C5F00005DAC4E282C9C4CF753FFF68DE6DAC17AF
+:10C60000621C265CDFEFBAFE914A6BFDBB3FF591E1
+:10C61000376C217E6FB27ECD7852CB8D2DC7197FBE
+:10C620006AB96F2DCC77E192DB0D689F1036FEAFB3
+:10C63000CC760AEDDA3AA25323FCC9B8BA20D41E4C
+:10C640003ABE18C47731EABF7A5AD304C2D7DF5D45
+:10C650004E6C576F1072089E45F54E1CA73E46293A
+:10C66000834FD4A72AEDA1B29ECBE96A7D95686F6E
+:10C6700057C77B58B41FAD9695F12E52CBCDA29CD7
+:10C68000A9CEF7A02817AAE5FF7071394EB43F6113
+:10C690009B55EF2908E9FF53AADD180FE3C96EA0E7
+:10C6A0003D9033C91E48BB1A981FA2ED85B65EB1F6
+:10C6B00017F37F237B8CC5448FCB63DF21B9EE90CA
+:10C6C00080E4BAF17683D38BF37F9ED451B4C61243
+:10C6D000C2DFE7B7087CBB6AE39C32B65FF96ADE6B
+:10C6E00026E223396EF7C885F8DD3A56C77AA74E99
+:10C6F000B63881E87BAFD0FB6AFF48D8D0F2868697
+:10C700009E51F5B2C4F3C16CFCC1F9FAEF1BF5F40C
+:10C7100006C2598E3F9770939929F4DC48D4AD95A1
+:10C72000F8F336EA5933D23D251B9C3A6C9FF21A36
+:10C73000EA67A2F141BFD0C7AFC5F824149C958F1A
+:10C74000BDC9F66FA18C528EF87B2DCF9D97897C49
+:10C750007A34CE9F4B7CDBD0B28DD7758DDDCAE3AA
+:10C76000833558108ECFE2CC28FC979E01FFA53F61
+:10C7700026FE718203A4CF752874B4BEE596B778FF
+:10C78000BFCB95EFAC5F3243EDB82C47978FC639DE
+:10C7900032081F0E854E0774B60A055F5713BEFA9E
+:10C7A00017FB7313B1ECF0F947BAD93EEC2A97881E
+:10C7B000EECD7140743F2AF98BF60E41FF8ED60EF6
+:10C7C000B6CB5B5ABB18BE8473D0BA557CDD108DD6
+:10C7D000DFF967C0EFFC1F13BFA3F401A303FBAD98
+:10C7E000DA073C4E85FF8011C2F44C2BF125E2277D
+:10C7F000A14BE2FA3AB92021A0A98F13FE528E7301
+:10C800003CF1E9CA19BBAA37482179981C0B1D31A4
+:10C8100049CCD70E85AF1DC4D72AFF223F96EA1117
+:10C82000CF6F9DC47E43E037C4BFC0F3A878BA3B46
+:10C830001AAF1B888EA7C1ABB6FE07C66B27FAC717
+:10C84000A43782AFC478376546E3F9770A5E557C32
+:10C850006F53E47F383C6F233CA79E7F3C6FCBB483
+:10C86000F1B891F81ECE3E45D2475DF710725A7E60
+:10C870002E723A2DDBAAF8DFE8771646D3FD6DA2BB
+:10C88000BB5943F79E33C853CF8F294F91788B8480
+:10C890008D12B83A2CD1DF3FCB1C56DF9D173C4E92
+:10C8A0000ACED6F86793BF756BFCB329186169FD92
+:10C8B000D89B34E53AEBAD9AF697A6ADD5D45F6E2A
+:10C8C0005BAFA9BF32FF014DF96AC763117EE6D3A2
+:10C8D0009AFA7AE76F34F5739BB76BEAE7B7F468B7
+:10C8E000EA1778FEAA29AB78DCDA0A1C2F6D6B35C3
+:10C8F0002BF1D3650CAB03FE5A12838B0F07D9DFE4
+:10C90000ACF4B7D7B24BB2AF83FDD1329FAB96C276
+:10C91000AA8A9DCD6F12F4B55A95782D8DE15BAD45
+:10C9200036D6EF3B5AF319EE6C7528F15A25C35DE4
+:10C93000AD4E254E73318CB40BAF66BBA764213D61
+:10C94000A6BDBC4407B880E97FF867C15E5ABC77D2
+:10C95000BC8EE2DC35CA5E8E577FB3FF36E4AFE3B0
+:10C96000CD2607957BB71F31D80AA3F965EEB732FC
+:10C9700038C3F86C6ECB5F0DE467CD450FBA630822
+:10C98000399D9AA5637E20F703502FCC368321056D
+:10C99000F5C1ECD992A30DF8BB079218FADC583F09
+:10C9A0004D0F3E1396EB2D7A9F299E97E632A33FBB
+:10C9B0003D4B2C134C7AF0503DA424739C7E0D7D8E
+:10C9C000B4A13C3865B818BFCF223F1CFB5D6FE9AE
+:10C9D0003090DDBD6EE72FFA6FC37AB8D353CEF136
+:10C9E0003D5C6225FD2D793ED69D1A37BCBC2035B5
+:10C9F000E150185F4F25194EA5F8D1E17752DC7A46
+:10CA000093C1F19C2DBADF05CA7EA7C912FB6FC185
+:10CA1000D74DDE4D52483E717F3B4DB8CF26E201E7
+:10CA2000DA67B3C19757447EF676F6B39B2AD716DA
+:10CA3000119D9A2E913E311585E29DA6962FD98F94
+:10CA40008FD4CF91F04CF190C36F65FEDBDFBA93CA
+:10CA5000F9458D8B7A5B7D5C2E0BB86AC3E3A339F5
+:10CA600093FF4DA6B8A7EA4B11FF4C3CE9DCFB5302
+:10CA7000DC77A0D5FF2FE517D4BC829A6788CC5B02
+:10CA8000A87A64DEAD75096EDCEF9A2C5106F3943A
+:10CA900074A6A35E4055DFDE9A156597EFC83ABDD0
+:10CAA0007ED6D6FFC0FAF96CF9BF314DD8D548BE55
+:10CAB000DF37E30503AD53E5EF48FE9F437D70FE8E
+:10CAC000394D92D7837A7AF69276C344E9DCF97DC0
+:10CAD000B9E5A0888B23EDC2F7B60736A69B5C2B81
+:10CAE000737C61926F72501E44A5434734DD3ACF88
+:10CAF00040B7CE1F936ED176F1E0BC73B38BA0F13B
+:10CB0000CFDFCB8AF2273EC83ABD1FA9ADFF81F720
+:10CB10006D1D6B63B87244EF3C5927EA457C620196
+:10CB20001DF2EF8057E6B87469667B3CC533501937
+:10CB30008C277DB7AC5B06F20F41EFD48F46FE5CCD
+:10CB4000A2F0671FF83E247E5C05F77E4109982518
+:10CB5000D54BAE223DB7F40943084FFCAF93F32702
+:10CB6000AB947ECB2D9D46DAEFF267B5EDD4711A0A
+:10CB70005F8AC81F575FFA19B0DDF073DE6F55A7E3
+:10CB8000B6DF77597129876259164B08EF67D2A72C
+:10CB900047C9AE1BC2CA275B39BF203FF3E0039EE3
+:10CBA000B121FAC46447F1715CF6E9F9585BFF23DF
+:10CBB000F3B11CF7AC91E8F97DF978BFDD9945EB4D
+:10CBC00056F5F3A0DE79C3C47A67A0DC26F2A43759
+:10CBD000FDAE2D9EF8E40438881D162AF9D2856A28
+:10CBE000BE749D365F3AB9CFC779B94907BD6D713B
+:10CBF00048F789BD1ECEDB55ED76B759B0FCD35D45
+:10CC00004E99FCA3F16FB9645AB7EADFA8FE4E480B
+:10CC10008FE5B0BEE3BC6BF6D9EB3BD52EAAF63060
+:10CC2000D20E5606DB6BC9FE4DF8B6E34D82E72BFC
+:10CC3000AF1E69F7DE8B137AE2A8C157BE97FC8C52
+:10CC4000D7631CCF41F4FAAFCB167EC64CCF02039C
+:10CC5000CB1F091FCADB0C456EAE4F765F974DF5B3
+:10CC60008ABDD0999D06B2A37572DF23D7125FF9F2
+:10CC700065CE1BDE7CC707BFFFB5EDCCF98526EB83
+:10CC800071F63F868B339A74E0A6F8A2A4D6564A72
+:10CC90007E0CC56D944754F38A91ED9FB0D7ACC814
+:10CCA000E63C57B5DF49EBD928D6331CBD9A5ABEAE
+:10CCB000D0E431879BBFA9BBDCBA304C3E5ECA16BC
+:10CCC000F12ED2DB7AC81CA2F7D9F2C5FFB7F865FE
+:10CCD0009A0C1E09ED6CA1E415FE2F083F780EF8A2
+:10CCE00019CE8320433758F97C6A2138182E021751
+:10CCF000C37CBBDB4B7C3360088E24BEEA7FF5BB74
+:10CD000002E29BFE8B27B657C1F93B5F8AF4FF0610
+:10CD1000C6DB78FE8157BEDB43FC397087E1ACF49B
+:10CD2000C6EA646727F151E479CBBB53643ED7016F
+:10CD3000FD7A968B7AABE80397A4721BEBD84CE68E
+:10CD40008B90DE1CF5B4AA371760BFC24F74ACD706
+:10CD50006099E4B563D3AE808E45AC7071A657A6DA
+:10CD600072A7A82F5C99E895B05C581523EA6F4A22
+:10CD7000F44226C5430196CBF900AC0F1780D08B47
+:10CD8000378293F78991419684FD176F3597703EEE
+:10CD9000160239A4FF8B288E1A224EB7E608792F87
+:10CDA000CE12FABEB8469B17F9305BC91BDB6B4A43
+:10CDB000721056E738F7121D8B93FC1B1E2AA37CBA
+:10CDC000900E36A17C7D56752B9F77AAFD1AED3506
+:10CDD000BD84BFCD1270BCE2E936799F13E78C2386
+:10CDE000C3CFCDF2EDB507A8DD115A7BF9F078C5B8
+:10CDF0007E1CF747CB9587D7574CB11BE7FBF14318
+:10CE000025CFCBE5FF79E6EBFA3B0BF84CC1437E2F
+:10CE100072A3DD7D9CD76F04B0D0FA9F14711440CB
+:10CE20007306E547973C65D2919FF1119A63C80359
+:10CE3000F81BC6DD04FF1BE367827FC7F899E02774
+:10CE4000183F13FC07C6CF04177F3B1E8322808D3B
+:10CE5000394E4B4E79E81C3072BD861C81CFC1F92A
+:10CE6000BB8D3C7F9DDDCDF81DA4F7EBE0A573994C
+:10CE7000CD89C10B924EC36F03DDDFF0F9E9707805
+:10CE800051CF2523EBBF53E85AD4A967FB5FD415D4
+:10CE9000886F086B77418E91EB0B5F39184FE31F5A
+:10CEA000B50EE2D729E196A7E944F982672D330848
+:10CEB000BF75766709ED1BE53C83F651D4F5C18358
+:10CEC00013CB787CAB64A375041FE5B821621F9176
+:10CED0007850F7B539D1BF81FA6F7E258B76827A8B
+:10CEE0000784DC101F4943ED772DF3CF7453B0CC8A
+:10CEF0008AEB9D7E4A6E1E0AFF75F6298CE77754F1
+:10CF00007E53CFC715FE52E976AEF21D391E906BE7
+:10CF1000847EE76AD2A536B24B27E3C92FAC57EE21
+:10CF2000197475E6BC47FBF4EC94C16E633ED6C839
+:10CF3000DF62855F5458D86D7411BD36771FCA59AA
+:10CF40006461FAE42CC6F6B372EC9ABC6761D589C9
+:10CF5000C71F4AE1F6569AEA3A78BACE8AE3DF600A
+:10CF6000DEFE366D69AEF593BA442CCF4F93761042
+:10CF70005C60CB9C9A64A3E57A79FD37E64FD94192
+:10CF8000227595A39EFDB929A464C2EC43AD3996E0
+:10CF90000E1F07CB75D6644DF9D2B4319AF697DBE4
+:10CFA000B235F557E68FD3D4ABF35EE528D5B42B75
+:10CFB0004E0A66515C87FB60B980E764AF5DA27D75
+:10CFC000EFBE621C96A73D3FCB416ECA66A57EDAD6
+:10CFD000965A2FD16300F1694487EA70E5FA471F3A
+:10CFE000A2C122E286C6EE6776386DE710370C13D1
+:10CFF0002FAC00718E3F5CDC10192FA0FE7C90F4EA
+:10D0000067F1ABD758DB70DCCD55272EB0E13EEF92
+:10D01000CCC13882EC8D12470CC73F837222D904F1
+:10D02000FFF4C8F0DC10FC03F00B851F059CF63EF6
+:10D03000FA3305DF5FBF7D4AFA8DF3071EC5EF5750
+:10D040006044BEAFD8E8786F0DE5A7DE9181CEF9D8
+:10D05000E124AE03EB1BE87739C4F7B0E8E9BB463F
+:10D06000A7F0770FB9A6AB94FCDF1F7314BFAA71AA
+:10D07000FB5DA3CB42F570F3279AF670BB74B7A69D
+:10D080007C67A6B67CEF94BBC3FB0FE797356C5C5F
+:10D090006074A39C363C2C39BD43E88BC1F5A428B1
+:10D0A000FAA17B09EBDB43DB97196D71D1ED57E1F9
+:10D0B0007894B76C18C6DEAA7AEA3A199A87AA7FDA
+:10D0C000479DCF717EE7FB08714FF6CDF39AB0C351
+:10D0D0001F25B88DE17CB22F479C7BF43FF6C01D25
+:10D0E0005FD379EEEB22BEEA4F14F6A3A8F3339D8B
+:10D0F0000E61F108C15F45D6808EECD2C0D2580FC8
+:10D10000A09C352D8BF3E88AC98F087E681E4F5E80
+:10D11000C72D0F9A91CE1FEB741ABB3C40C11696D7
+:10D12000FB9EFDD98C3BE9F702712FE97CEDB32F13
+:10D1300007847DAD117A631EF19F62B7005556D307
+:10D140005D3068C748CF105EA89C6BBFF5FD87C9EE
+:10D15000CFEF117A83F20A37B05FE0B468F30D1DA8
+:10D160002CE7F8BB2DFC3ED759EB8FB7DA8D96F341
+:10D17000A84746D8B5798721F4C5FB57223D9B5E69
+:10D1800097F95ED0B1ADF60408D31F91786CDA2818
+:10D19000B39CABE5A35BE5CBBC6C0F8319F585D1E4
+:10D1A000F806A783E57FB555CCB77AD23733C84E9A
+:10D1B000AFEED68B4B2FC3CDB34E065BD83C9BB79F
+:10D1C0009996925D53D73F6055F449F75749530AF2
+:10D1D000045C3B847D45BFC090427E41BDC4F1EC00
+:10D1E0009EEE513584A73D12F86C253CC435665C33
+:10D1F000DF4C311C7DB7505E14D2F2F99EA51AD7D0
+:10D20000AAF1ECACEE5976F2633FEC5CB807290763
+:10D2100093ECD9CC4FD78287FDEE3D89AE74CA938B
+:10D220004C53EE3FEC490CF691BFBD6752AC44F74E
+:10D230001970FC3B697C755F7B0CAEF466DE9792DF
+:10D240002F75FE443E157BF671A2AA67EBE4DBA7BF
+:10D250005C49E7F773C04AF1EC7459F8D5F04721FF
+:10D26000CFAA5E6D92FC496CAAED33A6DB114FA3E9
+:10D270005A7EA9E47DDB35F700CFD6AF1E8CA35FC5
+:10D2800094987F563944BCB1AAFAF347AEC5F95712
+:10D2900061BC4FFEDDC2AEEDFB087F91F1FD607C0D
+:10D2A000F52FE67BA3E333D732DADFCD771CDF73CC
+:10D2B0002D44C769837181EA5F3E17CBE7D6A85832
+:10D2C000857C28FC7A645BEEDE35587FE42F0666A9
+:10D2D000D73727FDEAE8AD58BEF9B958C6F391240F
+:10D2E000F0901D39B229CFEBC1064B74C15EB26F0D
+:10D2F000B0258ECF693E7B32EFB72F517EF2B776E5
+:10D30000F643487E6CE8C27C46F78FE8FBCBA3B9B6
+:10D310001FB8C5BC0D8A5CCA2F14DE5F4DF52F24E3
+:10D32000737E42A5DFE127639C14AC7D05BE222BF2
+:10D33000B2DEE792E710DD5B5CA17B69BF847CF91C
+:10D34000D508F706DAF7F2C7FFF3C389B89FDA17F3
+:10D35000AEFE5515AE6FD907A940E384E83AB4DFB5
+:10D36000706C6BB6907F053F2B5E8CF11E0CD32743
+:10D370002B3B1235E5A6AED1DE83617A68F09E7252
+:10D38000A3C4E7048D8A5CED37BADBED94D7A5FB27
+:10D39000A94C3F711FB584CEAB08FFF79918FF91D8
+:10D3A0007CF6A25D396756F33CC9604E23B9750B14
+:10D3B000FC0DDC97B789E2319F3D49F13B82B933DF
+:10D3C0000AC3F9B377D51B9CE731897B8F31439F23
+:10D3D000EB77DA13B97D83F94B4D9E6955CB094D37
+:10D3E000FE675501B01F50D2662BBD89CE8714BA97
+:10D3F000DC9FEE7A8DF1DEF1C0ABBB189F4FDCF203
+:10D4000031CDBBD3C2F4835D4A3C16116F3598BF52
+:10D4100050E4EF698D7F7EE8B1BD4594FF38F4CAD2
+:10D42000B822CAD32E94FD877E9DC9F79CF6DF866D
+:10D4300070CBCEF7392F1EB9DEA87B0C92D0438D6E
+:10D44000B48F64BAFFE37AC7CE722EF4C3810D8520
+:10D450008C3F351F3D7064E878505DA73ABEBA3EF8
+:10D46000757CB5DDDFEC225FD06FF41791FD5F4175
+:10D47000E73061FBEA8FF717255AE8BB55F81349E7
+:10D48000580EE3B77FF5BC2AF27C6AF05C56C947B8
+:10D49000EDD3ADFD9911F9AFAFE321833B5CEF7E96
+:10D4A000CF732A75BDEAFDDA7EAB85FD9B937625A9
+:10D4B0001F9F0EE9D40EEB1D3EF2BFB7981CE4C7C8
+:10D4C000279A5C908BF86934FAF8FE9ADA2FD1E447
+:10D4D000E6EF9179F9814423D0BDE58154E5FCF76D
+:10D4E0002B60BD4271E8169CB7AC56D7BCC512D2B2
+:10D4F00087AAFE2C1B87DF0BE81EA93EE42720DF4E
+:10D5000094156BDB87F6A32DFF7BAEA06359B26E3B
+:10D51000C838B92457C8651B74C8429E851D9DA88C
+:10D52000E01D0DBF1CEED7AC52F4FC40BCD9430744
+:10D53000BB13B78A7BAB13F5BEED04510B404B1206
+:10D540005D99F489F1BAB4FA9C6CC81CB6CBE3D8E7
+:10D550002E4F50C87DB7D4CCF75B43F75CFD32C18A
+:10D560008B21C8D009563D412403C34BC0C5702A46
+:10D570003433BC0CDA195E011D0CAF023F43F8894D
+:10D58000AF0DD81EDC6E65FFE9F2253AB2CB65D748
+:10D590000EED97CF52F0353C3E50CB579C3B3EA60C
+:10D5A0002AF77287C5CBD87CE67B152F26E24FEC95
+:10D5B0001703DE34829320C0E34C2646CEA678DDE6
+:10D5C000C6F77E6BC1C9E5BAB3C44765C0AD77176E
+:10D5D0000C8197DAA1F9649EC22703B9C0F851E91A
+:10D5E000F548AE8DCB2ADD30504C237B104D4FC813
+:10D5F000A07596C5D61CA7A722B73F5F36538F7A72
+:10D60000B4ACB4660DA9905FE64E15E589352FD30D
+:10D61000517DFBF3978A72714DA9C1815EE8DACB27
+:10D62000665E82FAD9ADDC2737A311A07B6372B6A0
+:10D630003817762BF7CA4D72E65ABA2F66BA0D58CC
+:10D64000DFB86300FCECD722B791BCB8451C7BB3B4
+:10D6500055D0AF3AD67D4B2ED933B32FDE8674B872
+:10D66000796DDD28B29BF718C5F89FA4DAC6BD8195
+:10D67000F83299C4BD5675BF58EF89C17240B2AD3A
+:10D6800069C90CAD4B5DC759CC7BD7E9E6CD4F7767
+:10D690006F203D023607C7156314FBBE65CBC4344B
+:10D6A000F430701D565E47202E774D0B56DD91EEFF
+:10D6B0007A84C61B88137CF808D1297578E8CB7565
+:10D6C0003E943BC4F781B5DFBCEA23BDF4292E04A8
+:10D6D000C7F94DAEFB715A47932E90518AF4FB4522
+:10D6E0002C7A000521BE96909873100F6D4EF01A9B
+:10D6F000595E947736CAF9992A17038B713CC44F47
+:10D7000099CB558BEE2254CC6E7E9360A5BBBD1693
+:10D710006B689E17683D4D72B081F8E468E207C6F9
+:10D720004F596EC70AFE54F459F7B69EDBC688A25D
+:10D730000BC2E4B269DB89AFFF86746F3A66715041
+:10D74000F3903C3EB6469CE75A34FA4695D3095DC1
+:10D75000263E389CB8F5A2C5D46ED207BDD9A4B771
+:10D7600027F706DAC87D1EE8DE3B46C889EAD77F80
+:10D77000239D8B7DF9CC8CFC914010F9235E9C831A
+:10D7800073FCF48A38075FADE43DA9ECE17D8B784A
+:10D79000548D3B57F6BC2DDE8579F06F05BD2B12FD
+:10D7A0007F963E71E355C46F91EF8BD478B449698D
+:10D7B000B7A2D77B37ED27F2BD5113C5A345C3BF31
+:10D7C000376A7AA296E3D1C8F746BDB94AFE4AB194
+:10D7D0008FA0F8A14B9436B43F0BC78746AF09F72B
+:10D7E000B6FAC9350E2B95D32D0ED6C7573D0EE18F
+:10D7F000EDE18964E619559E97AD93D8BF56F15A6D
+:10D80000FCBCC949EB287E7E14FBCDE8EF8B7BE99D
+:10D810004A3E91DE12D07B83CD89C12CBA67BAB95A
+:10D820003BDF41FEF81F5A9DF00F43687D6A3C5074
+:10D8300027BF544BEF878E2DC2380B3FADEE79A634
+:10D84000CD8CE5D5EBE95510A584F313C8AF2ADFDD
+:10D85000298397C601EF43D5083B153937A5E9C0A1
+:10D8600016868F18DB08B00D910F3029F48BCD4F41
+:10D87000D2D4C7392ED0F44FA8CCD2D4B7C588F7AC
+:10D8800032E071FA0B2A42EF48129D3FD1F4830037
+:10D89000FEAD08BD17B9277EEA4E7E4FE26FE03C31
+:10D8A00045F265259AF62679AB4CFC5DFDA55E43F5
+:10D8B000CF9F52A61BF156B91BFD1C9C67429FB619
+:10D8C0003E26E001EA17B35BAFC94B986CDAF285EC
+:10D8D000794A9E622C8CD5E42906F12EF8FED86197
+:10D8E0001DF34505E4FCAABA8CF06C00AF2D1A6F4D
+:10D8F000C740F85DC7C65A1CF4966A42CFCB32C9FE
+:10D9000041AA4B8BFF51B3B5F81FEDD6E27BCC5249
+:10D910002DBED39BB5F8BEB0458BD74C8F166FD9B3
+:10D92000EB2668DADBDB6B34E5BC8D5768DA5FE445
+:10D930009DA1298F7BF17A4DFBC28E859AFAE2AECA
+:10D94000E59A7A95CF86E383F1BED511FCA603DD77
+:10D9500069F8A074E7CF35F3FD50F49F9FA7E80561
+:10D9600085FED72B76E5DDF8C3F792B84E8B157A96
+:10D970007030DF506DE078EE3D5B726D1CE905C5DF
+:10D98000DEB9147B07394F89B255941D7E71BFA251
+:10D99000649FAB36DE46F72CC4FD8A8AC3EDB50919
+:10D9A000D43EE21DD6F44A4973DE1DF92E6BA667FC
+:10D9B000AD9C20D1BD44713F31F21E84FA3EABDEF6
+:10D9C00019A339271FEEBD969A5FC278018C142FD8
+:10D9D000E8CCFC3E31DA1F726C94D95F73B3FFF66A
+:10D9E00067C9CD79A76BCCFE0CE2EFECB1EEF5790F
+:10D9F00088B7A33A878DFD3DE5FDD6006D8CDF2FFE
+:10DA0000F5CCA43CE90086BB94D7D4DFB36326BD34
+:10DA10005BC4E55B031522ACA63F8FE6B91FA4717A
+:10DA20000E48D6BB4BB1EFBB133ECF207B66A27333
+:10DA3000FE123EFF7E382FFCFC7B14EE0FF56D408E
+:10DA400067F3F079EECF258E533EA7C1AAC2E477E3
+:10DA50009D41794F2AE2B6B90ABED4B86D8E32FF25
+:10DA6000011C6229EAF3B95D7F66BCAC48EB53E266
+:10DA7000BD668715C7BF71ACA584EF7B394B1D22EE
+:10DA8000DE57E3B831F2F7B1B367BA87B522ED8854
+:10DA9000269E86979287CC5746E6C542FB16E31F23
+:10DAA000581FCB76E8C0FA74CE3F86C63FCAF985C8
+:10DAB000B9CDDAFBDDF35B3ED2F0DF02CF279AFA75
+:10DAC000404AD03006F71F7875F4D41B107FFDAFA5
+:10DAD000982A289E45BAF5E49587C60FDC97778982
+:10DAE000F01BCEB4CFCF791DBDCAFD5A759FFB5B2D
+:10DAF000F77139D01A88B8EFE4D1C4BF2A34FE09CF
+:10DB0000F2C98F0E4A231C43E57366E78B38A95789
+:10DB10007977DAABBC3BED55DE89F62AEF427B958F
+:10DB200077A1EABBDD5E099C74BF648EE47A6A81EA
+:10DB3000C4EF760FD13E9B96078BE85D635371600F
+:10DB40009E24F3BBDD23F47D8877BB459295F46971
+:10DB5000EA35F46EF7F008CF51B2D8D9F989D75029
+:10DB6000BC70D828E4A3F4C56F66D27BBDC753DD73
+:10DB7000C789BF3F95641FF3F3EB129F2B8333607C
+:10DB80009C7116EF7ABFCB13E73427F3C4B9890A27
+:10DB900047E60BBD564AB09CE8726F2EBFBBDA68F1
+:10DBA000E27757389F5317761F22F27D5CC91F4DCD
+:10DBB0003ED21F6ADE27215F9C37D3BB395A67CA22
+:10DBC000FD26F16E2EE0CFA07776740FCA45F2BD28
+:10DBD0001B9CE21D5EDEA6F0F73009F9CA3DBD458B
+:10DBE000A079A7B7B2E7C07ED227AFE5B993F353C8
+:10DBF00043EFC756C66F677FAF20DFC6F3E27A797F
+:10DC0000FFA817EE24FA9CC77C61567E79F4FFD7F3
+:10DC10006038BCF52FF63F5A90197AF716F6DEAD4C
+:10DC2000203F2CAFA7AE3F34CEE9E542CD7BA9E53E
+:10DC3000438FDD934B72867411F948599A3F63887C
+:10DC4000FED3F305FDEF4F774DA0F997378BBC60FE
+:10DC5000886FDA6FF998E8DC6319F23EBFDA3F7239
+:10DC60009F2BB7F5303E709FF3687F61FBBC8CF053
+:10DC7000A5EEB3BF7BEFA305B673DFDFF77D776E4D
+:10DC80001A81716DD2507976B43E617E9949ED3F2B
+:10DC900056AFED8F0E39E5B1BB48DED16FE954E2E6
+:10DCA0001EB2CBC417AA5DEE54E22029B083ED0268
+:10DCB000CD4B7271B7E461FBA8E63BDA24B47F94E4
+:10DCC0005770AF617B215F6871105F7722EFF94970
+:10DCD0001EF4CE58CE7347C4D73F8B75DF4478BC53
+:10DCE000F9AF35A328FEDEF2972B94384ED8AB72ED
+:10DCF000853FCB697EDA474102F36D99B2BE0A7364
+:10DD000033FBC955E091455E43C993ACDFC1F1DFF8
+:10DD1000FF011A14AFAAD043000000000000000069
+:10DD20001F8B08000000000000FFFB51CFC0F00374
+:10DD30008A739418187A351818366B32306868313F
+:10DD400030883120E46885AF7153A69F9B9581810F
+:10DD50001788F981581088D73331306C60225EFF04
+:10DD6000115104FB9E2003C351207F1990EE1466CD
+:10DD7000605805641F03E22F40BE801003830C101F
+:10DD8000FF1561603005D2C1406C03C4C745F19BEB
+:10DD90007F82807CBC082ABF1B8D9F278C5FFF255C
+:10DDA00011FCF20F08C863C33216E4C74722057A94
+:10DDB00007023729A2F28FCA33303C546060D05139
+:10DDC00082F09B91E4ED8062C7E421EC2992C0B817
+:10DDD00007CAB5286237772A50FE0450CE4B8934E3
+:10DDE000F7DCD341E5AF3484D000BC3E14E4A80393
+:10DDF00000000000000000001F8B08000000000071
+:10DE000000FFE57D0B7C54C5B9F89C3DE7EC6E92B4
+:10DE1000DDCD262121BCC22601440DB8400CA04115
+:10DE2000370F5294A8E1A1A2226C782421EF22F6A8
+:10DE3000621FBFDDF088C4521B1FC5D48B7651B062
+:10DE4000D18B3640D058175C9E458B6DE845A0D5E8
+:10DE50007A13405E06B240A5B645FDCFF7CD9CDDF6
+:10DE6000734E36266AEFFFF6FEFFDB9F1DE6CCCC35
+:10DE70003733DF7CF3BDE69B8964BE91D88713F20C
+:10DE800025FC6E25E451891092184E9B3C93C69F49
+:10DE90009409B1ED7E24EA3B99840C9E6B7046D1C7
+:10DEA000A25F08644E4B0621C9658D7546FA3D791F
+:10DEB000917DBCE808C319987CE4BABD09840C7252
+:10DEC000D3F66682BF2FE97F3FB737C69174C87912
+:10DED00085A231E1FA4A9ABC48FA7B87AABE9B1414
+:10DEE00075A6DD48FBFB51FD20B785901FC3784622
+:10DEF00042A9CB40B2E8B8785D6F2EFD3F3A0EAF35
+:10DF0000CDE85B2910221A1CB1442424262348A002
+:10DF10009DBE9F673CEDD74908A736AAC84AE74986
+:10DF2000C8B49608F57289807888CD76257BE97823
+:10DF3000577D2EE2BC570D22A49DD62792D34E6862
+:10DF40003A95C461BDC72D2306427ED5AE3F120768
+:10DF5000851B9B19245E15DC060F210E13C5AFC768
+:10DF60008CE92A8F9DA7C9C4710D21AB3D0E4C577A
+:10DF7000794663FAD8D027DB7306D0F90C32D8E99A
+:10DF800048488363A6DD91118627C72D30E73809FD
+:10DF9000C92629AEC4545A2FD140C84D84DC42F35F
+:10DFA0007523081949EC8450FC3D93BC2CCA9D0193
+:10DFB0007907E6450371C37C6332032E91E22DC6D7
+:10DFC00069CF951CE1EFF81B80DF5F782C15D6C177
+:10DFD0007D1BCCEF19E2ECF0029EDD46E7265A7F6E
+:10DFE000A5EC4C5E4AE18A46DA2E83ADBB94101E46
+:10DFF000DF4CC01FED8FCCC9D5ACD730184722B449
+:10E0000073DC05EB6471B2755A097415611DE6F293
+:10E0100075586577D919FD384924FA11ED5AFAB1C6
+:10E020006468E98F7EB19FBA9EE769BF4D42ED3BC0
+:10E0300053E93CBD4B0CCE4DF4DB60A15100F80A16
+:10E04000BC25C480FD2AF9416552A063B41A9E170D
+:10E05000CBE9F7F60E73CFEF2D06E252E872532AA2
+:10E060007C77C4CEA0E3266647EC4C6BCFF187E902
+:10E0700024D925C940EF0E4C1B0447AC00E37C4774
+:10E08000249B049C7F72A4F6FFD3ED08F1E17A375C
+:10E09000F07554DA513C203D791F8B463C88503452
+:10E0A000390CE7171CCF17AD454F434A48E3685872
+:10E0B0005F9A5F87F463A6792BE69BB0DC1ECA3FAC
+:10E0C0008BE5C9AC3E5D5EBA18BDE3555917DA6EF3
+:10E0D00003C29142705E44389650BF9B303F2094FB
+:10E0E000FF25D61FCAEAF7B71F25EDCE0D9EC2F950
+:10E0F000BF2E3B009FC2DBD6C0AD942E0E6E107CAF
+:10E10000269A0FEC8C41FE757EFD0C9F89E267D745
+:10E1100038930BEA9FDF9883F9BCEDEFDB245A5E5E
+:10E12000B55D94206FD879D6D641F15B636A7FFCE8
+:10E1300066FA3DB85D242F6077D3719F9DE2B448A5
+:10E140003E63F9922896ADDAB06B1EC02D6B339109
+:10E15000280AA7EACDD23B6FA6F9D20332812A550D
+:10E160009BEA8C83697E894F6881FC8A9D1F603F92
+:10E17000DDB9A40CF6F739E05B942F75DBDA93EE8A
+:10E18000A6DFCB7D5B0AA07EF966C1094B5CBE7E33
+:10E19000D78700BFBC551E2152F815CD31C4A1DA76
+:10E1A0002F79DB17DF09E3AD7A472694ED91B2AB07
+:10E1B0000F199118A44623E0B56AD31346E09BE7F4
+:10E1C0003C07B01F059F552FD37E68BBEAD70427B5
+:10E1D0004CADDAC0F8CD8537A3E6BC688179D51996
+:10E1E0004741FB371F3542BD525FF1EB510E18DF3F
+:10E1F0000663018C73FD0663898A6F5634FF5633BC
+:10E20000AE534DE903DD19BDAFE739CEB7957C3983
+:10E21000154048DF92CF3843C5879E33C421FD5750
+:10E22000348BC411811F78DFE7FB608795F103BE53
+:10E230005E4BEDC01AC2EB75C9CED74F0A66CD88CA
+:10E24000C0E71EE7F2A391CB8F27417ED0F4692E61
+:10E250003FD671F9D1E471E2F7673D93305DEF711C
+:10E2600061FABC671AA63E4F11D67BC13307D38D26
+:10E270001E377E7FC9538669B3A716BFBFE2598E8A
+:10E28000E9668F17BFBFE65983698BA711D3AD9E8F
+:10E29000264C5B3D3EACF7BAA719D3364F0B7EFF39
+:10E2A000B5A70D53BF2780E94E585F9A063CED98FD
+:10E2B000EEF61CC374AFA703DBEDF79CC1742DC74A
+:10E2C000BB2D9BE448146F36174139185FE8CA919B
+:10E2D000693EBE88E593E67A738C349FE4A6798A1A
+:10E2E000C7C195811C13CD0FAE65E5293F24B966E2
+:10E2F0009A4FF1B2F2B4B5AEDC289A4F6B64E5A345
+:10E30000D67B73A3697E948F955FB739901B43F3D7
+:10E31000D7B5B0F2B17E9267A1F9B101961F7FD057
+:10E320009567A5F9F1ED2C9FF5A137CF46F3591D5F
+:10E33000ACFD4D5D81BC589ABF29C8CA6FB94AF27D
+:10E34000ED03402E0B98CFB5E4E4C7D17CAE9DE53C
+:10E350000B86164B8E08F4B753EE5808227C86B015
+:10E36000D125517EB3D3D8F110157D64A1F0AA4B0D
+:10E37000A2FC3320934550FEB0F03A96078C641906
+:10E38000943F2ABC8DE5BB650796FF5C38C0F2461A
+:10E390000796FF877008F37B651796EF10FEC4F2AF
+:10E3A000461796FF5E3881F9FDB21BCB3B852E9652
+:10E3B00037BAB1FC49E953573EED2FDFE09E2EDC22
+:10E3C0000872DB5D8672596A49067E59CFF9FF04EF
+:10E3D00040062DAF1F644439B8F3F3AC174581D321
+:10E3E000F600C897BC04FA0585335B48047D82C2F9
+:10E3F00011FB8673CB179334706EF9A24C81F32016
+:10E40000C289EA1F9C9D5FDCA41DCF17E50A9C1200
+:10E410009C97B57FF3BAE5CB6CED78BEAC54E0D4F5
+:10E42000209CB8FE8D27204FD4C009C8A50A9CE5C2
+:10E430000827B17FE37119276BE0B88C4B1438754E
+:10E44000086750FFE0048C376BC763AC50E03C8634
+:10E45000781ED6BF79B94C53B4E3315529709EC2AA
+:10E46000F1A4F60FCE6EAB163FBBAD21FCAC473826
+:10E4700023FB37AF5C9B163FB9B6107E36219C6BF1
+:10E48000FB0767B74D8B9FDDB6107E5E43FC8CE9C2
+:10E49000DFBC7263B5F8C98D0DE1E70D1CCFB8FE86
+:10E4A0008D676FA2163F7B1343F809209C1BFB3737
+:10E4B0009EFC242D7EF29342F87907E14CEE1F9CDE
+:10E4C000BD495AFCEC4D0AE1E70F08674AFFE695A3
+:10E4D0003F508B9FFC8121FC7C807072DCCD4CA96D
+:10E4E000A470ACBDC3D93F4C8B9FFDC342F83989A2
+:10E4F00070A65238E97DC32948D1E2A72025849F20
+:10E50000F308E7B6FEC1D99FA2C5CFFE94107EAE38
+:10E51000209C3BFA37AF82E15AFC140C67F8B955DE
+:10E520001A877286CA4E27D8E7DF199AE31232C1DA
+:10E530004E6279D1EE24A0F7888A3E43DA5D22AD9F
+:10E540006FD91C37FE31A2D66B728D064ACF56AA00
+:10E55000E5A9F59AD849D11A3D2ACE15AFC9274C5D
+:10E560001BACA99F5894A6291F38E73A4DF920F70C
+:10E57000784D7E48D94D9AFAC36A7335F9E1CB6F6D
+:10E58000D7D44FF5CED4E4D3D7DCAFA93FB2718155
+:10E59000A6FC9AA6724DF9B5BEA59AFCF5CDDFD7BB
+:10E5A000D41FD3B242537E43DB639AF27181273585
+:10E5B000F909079ED5D4BFB1FD054DF9C463AF6815
+:10E5C000CA27776CD5E46F3EF36B4DFD29C1DD9A08
+:10E5D000FCAD9FBDABA99F43FE53AB6F9B3FD0D417
+:10E5E0009F6A3FA129FF4EF2273A3D556B1FAFCCE2
+:10E5F00021CCAF3288D9AF01AB11F3C6C11666A7E3
+:10E60000584B1C2729FD18772F740CA0F4033403F2
+:10E610007651CEE0B26B3AE8F7EFDDE4BEC64EBF0E
+:10E620007FCFE8BEC11E41BFA1F4269064481D06FD
+:10E6300048F5E58FCA8CDE73875C1DD549DBD7189A
+:10E6400082A3E268FE2331E73EA0C7F90603EE830A
+:10E650006891D442BD681341BBE9D1D4AC17BDAABF
+:10E66000FDB06618D5338430DC35B23B19F528C3CC
+:10E67000F83AD09BEA87D1790D2664D18A71BBBC68
+:10E680002368FB6125C9E08F3019993F24D4BF91DD
+:10E69000F69F81FD2F81FE6B7AE9DF943649D3BF67
+:10E6A00039A54CD3BFD948FBB713F290E126DEBFA2
+:10E6B00019FD36CB564CC6FE4D2965D8FFA3466AD8
+:10E6C00077A9FB8F0EF5FF8881F6EB3130BBB9C718
+:10E6D000FCD36ED2CE3FA55C3B7F239BFF4A432EEB
+:10E6E000EF3F1AE7BF6A450E9B7F4A399BBF89C13E
+:10E6F0000DF56F0BE1BF01FAFF692FFD9BD2B3B59A
+:10E70000F31F5EA99DBF89F5FF94E176DEBF05FB8F
+:10E710007F7AC56D6CFEC32BB17FA3C9ED04FA31BE
+:10E720000E89AEF5D1FEC9506A250D0472A1FD40D7
+:10E730003A3A1EFD08771AD2701CDF8B66F47625F4
+:10E740009AD21BF2332FB3C37D947352BBAA9AD3D0
+:10E750007AC5E61C23F03D2C4F2264311FEAA23615
+:10E7600011E99B3C6DF28DA4E3BDD0267A21BFE870
+:10E77000E9293EE0AF352632BF08DA492400DF3F01
+:10E78000FED99817D4F3D2A78B1BE55391FC45DE35
+:10E790005C32BA968EEF0210812A7F9CDA71601883
+:10E7A0007F48ED1E42ED9F1332EBEF236AEF41BE2F
+:10E7B00083DA7B6838933AE657F3BADE1F41C75FC6
+:10E7C00044949F0BE7792F6E290A4F62FBF7F85AA2
+:10E7D000C107EB317F790C457E783CC5DE044DBE28
+:10E7E000C6C4EA076F137C2F0808C30DF899C1E16E
+:10E7F00011182FCDCFB1B3364777DEB15FB0D17DE1
+:10E80000B466085D8B309C59C4250FA4EDEF5E56AD
+:10E810002C836BA75D1086819FB066A14C02683780
+:10E820007B134906270E3ADEFBED0CFE0C977C525B
+:10E83000ED479B239B5D45743C738A451CFFAC6987
+:10E84000DAF23FED8C7119C6D274CD53D8CFDD45C5
+:10E85000DAF27BE768F3F7B9B5792A576590AB0F21
+:10E8600094E9BF53B42481DF31F41B00E37C90E3CF
+:10E87000E1C15AD9AB59576A761B95727084B809B1
+:10E88000CE0BDB8B3DEBCF5FAECD177BB5F9856B48
+:10E8900074F039DD9CE2EB7F1CE883A6A7813E285B
+:10E8A0003E4F72FA08F3552D7DDC139A06A30F65CF
+:10E8B0001EA724B604A7D633FA58DC1813991E8A6B
+:10E8C00043F4E052D397420FF3383DFC99D34369A8
+:10E8D0009396AEEE23BED5C9B4FD036B77E13A1D26
+:10E8E000118A193DFC40A1870E0D3DB8393DE8D78E
+:10E8F0006F1EA787798F307AD0AF6707A7878EA65C
+:10E90000CB3249EBB9AE741D3479BA0EBA75B7A3E0
+:10E910001F8AAE47447A58109A379D38CD2FE46548
+:10E920003DD68BD30396A701DA09E209DBA7F7AC42
+:10E930004FF984265FDA1479FD6BDA36AC3DA9FA1B
+:10E940005ED5F2F25AB57FBBA2798B26BFC4F7A67B
+:10E95000A67E69D32E4D7E71E33B9AFA0BD71CD26B
+:10E96000E48BBD7FD4D49FBFBC5353FE60ED594DA3
+:10E97000F903651735F9FBDC7FD3D4BF778EF0132D
+:10E9800075FEEEA2A89FA8EBCF9A16A7C9CF700D6F
+:10E99000D2D437ECBCF62EA0C783EF8B04F48F4F94
+:10E9A0009DA7D1FFF9A95376429D931E07EE83538D
+:10E9B0009ED1989EF138719F9CF34CC2F442DB1EAD
+:10E9C0000BC8152A474BE0C8A674E596BA35D9207E
+:10E9D000D709CADF8A956FD4798712B21494638AF3
+:10E9E000EFC22623094C204400E1C4C7151455E5A5
+:10E9F0001D7D9437514191D0B3BCB023F2F79A27D3
+:10EA00008B87DB239C7F84F73519027A52772FE7B7
+:10EA100024950229527F276405F281AD5C4FA93409
+:10EA2000327E51B975502EB1413E30AAF6ABFA6B29
+:10EA3000A19B6C20D049BA663F97365DAFE1F704E1
+:10EA4000BCCF89406F1334DF2B9A6FD6B4EBDA2535
+:10EA5000E2B8AB819750B9FD2A297A52043E15D805
+:10EA600093326B0C8CD3F514E6DB12518FECF2343D
+:10EA7000AF85F3C7739E164CCF78DA303DE509AC0D
+:10EA80008573C0939E03981EF7B463DAE13986E973
+:10EA9000479E0E4C3FF49CC1F44F9E20A6C73C9F5E
+:10EAA000617AC4437E02700E7BCC98FEC163C7B40A
+:10EAB000DD938CE9058F0FFB51F65D5F747786CB94
+:10EAC000ED73407F11E86CBB78AC6ECDD0309DBD4E
+:10EAD000B9F223A43305CF854D264E0F491A7A0883
+:10EAE00080ED7723D04B1FE54D32A7C3DEDA472EEA
+:10EAF000AF79E1BF87DEAE7C4B7A0BD3D3101D3DDF
+:10EB0000A5F7454F1FAAE9E98AC1CEE420A7A71FB0
+:10EB1000F3736B7DBF51123BA70CE977AEDB0C8022
+:10EB2000AAA5FCDC84906998BFC4FB5E49C1B5A36B
+:10EB30001EE81B0D72EBD2E8BF8F8273874BC7E8CC
+:10EB4000E2A7F63E3F3D9DF48E7717DA43253EBAA5
+:10EB5000E80911C61BCDF01A6520D3C878421A46C1
+:10EB6000BEE45C90817989C4437B9F734684F33A09
+:10EB700042756BC06F5F785D69BD3216E09D7AF6B5
+:10EB80001F59905EE1FA75F41E11F57C1278D109D7
+:10EB9000F80DC925933319FCF3C191463BEA09648A
+:10EBA000BA167FDEDB35F86B4855CECF1B93117F4D
+:10EBB00023AE8C1AD40FFCF5C5DFFBC2E70298F731
+:10EBC0007F033EFBE28F7DF145E272BCD646E7DF74
+:10EBD000BD73CCF8C71CC007BF1ADFCA799C7E3C46
+:10EBE000F992F4B5E8B83B49A1E3F614885BD82460
+:10EBF000DA11FEA5D66B62615D4270FA584FE1ED05
+:10EC00003FA780BD7F3E550B2F4B07EFD281176D7D
+:10EC100060772D4D5ED87032C23A2869554B5D83BE
+:10EC200045AD87B669F3971A85692D382E47ECEC08
+:10EC30003120276A1B18DF5E8EA90267697209F608
+:10EC400073AE393D96D97B3EC60F36C721BF38E734
+:10EC500029C3FAFFECF1F40647190F21ADE484193A
+:10EC6000F8312D4BEFBD7EAFF42CFDC588E7DD7E7E
+:10EC7000F90AE88966FADF9760771009F30ADC9AE7
+:10EC800016D16BBA01BE6FD6F447DB399433E22F4D
+:10EC9000D3BE6ADF48E49442B7545ED483BD80E7B4
+:10ECA0009B4B1AD47A5955CB7735F99AB6471AD473
+:10ECB0007A5C05FC83F25F522B484037959C8CBAF6
+:10ECC00025CB1A818EAF18824F808F08AC5E95B924
+:10ECD000C3E8A69FCEB7B275EB6D7CE73CE65488DF
+:10ECE0003B283337E2397259CBB5F92067CEB7AE3E
+:10ECF0004C02F95B215EFA5E5184F6BF94042E5FEC
+:10ED0000E4A056CFE7F441285CD5BCE9CF12C21786
+:10ED1000CD7719985F460FB78DCB91BEF053BDF9F3
+:10ED200050C1CD8E9E78AA6EBB6874235FA4FFCBC2
+:10ED30000AE349C15FB154D426D171973777A2FF56
+:10ED4000E28CEC1DF583AFE0973DE767493E15A3E4
+:10ED50009A9797B4433F0B26F18E88E3DE0F281F66
+:10ED60003FFB5B99001F225769AD2C74CD70BBC768
+:10ED7000400C5961BB67416B4521E0FBECEBD3D103
+:10ED8000EE5B448A6CB80EA4310BEC9CF3C480712A
+:10ED900055E7C91F6C1354EBF0B164E478A65C30FE
+:10EDA00089BB3410BE7B10D85FA639F5EDE258F868
+:10EDB0002E297690F025CA15B780F11773D8772FD2
+:10EDC00031D701FD527B4A63AF517B4A93A7F6943A
+:10EDD000265F426626413C45C9D332F10988274D5A
+:10EDE000F941C98EE32B25B5F5A01FFD9CFBE1166B
+:10EDF000D8893484CA87AA379ECB2AA6F3E9929889
+:10EE0000FF4B890F584265C5205A5E5EE633BA2C27
+:10EE10003DE777A275C23D94F3033C160770BFD15E
+:10EE2000C7E26B8843CAE2AA4F5AEFF31FD82ABA47
+:10EE3000A26C508F7E57C69BFAF5E7AF9F2F214FEC
+:10EE4000E23CCA9B67601C568F78073E1FB9597019
+:10EE5000F922EC27511634F12E0932C39FE2D71A5A
+:10EE6000AECB5F0F7995DF6BA2AEFC1BF39701442D
+:10EE7000C35F8A25F7703991F113C0BF2005717FF8
+:10EE80007D63F8C93DE05F2FDFF84F843F54BBEF4F
+:10EE900029FC89FFD4F18FE831FEBC48F0ABDE7865
+:10EEA000F57588772CFFD5CF6C84EEB7B35263929B
+:10EEB00093AE7BE5A6D53617F01DC96B837D71D661
+:10EEC000274E8B440FDF9779DC1F715904F0BBC2CA
+:10EED0003F29FC73AFFCF84EB0A3AE6C92EDE84F47
+:10EEE0006D36054C949EAB5B971492B198EF64F924
+:10EEF000472F02FDD7B4C9C7D5745AFECB9F254111
+:10EF00007C10A5942186644803689F546FFCB80068
+:10EF1000F48D1A12C4FDAA6F07FD7F168FF2B0D8C8
+:10EF200018DBB31C1D3449D09EFD6A5A7F7C51B456
+:10EF3000417ADB69E06FD4B244BF90BE5D19B73B44
+:10EF40002A64EB00E4AB13C944E0AB0A5E888FD9B6
+:10EF50001D2B5F7E666C271D57D7C6DFDA0415BEF2
+:10EF6000147BE952CBC25FFCDAD13B1FBF40F7A351
+:10EF70005ABF55E494A38DDB4B7E9656CA011BC441
+:10EF800073556E909D5EFAB9F2D5175F7A16FCD96B
+:10EF90007F34394752F815AFEE3B7213CD576C9161
+:10EFA0000714B2695884A4F0FAD4D0FF968F0FAF3B
+:10EFB00047F9B67D46C718F6FD87F1E175A9D8B2C5
+:10EFC000CB48C6F4C4475ECB2E638725C2FAB4741F
+:10EFD0001680FEB7F2E5BF1A81EF9DDD299081A969
+:10EFE00011F0B9611FEA8780275C4FBE5EA1F5D39F
+:10EFF000D5AFA1EB027246BF5EFA7A859CBF005C7A
+:10F0000088B3A1F4FDDAAF210EEE4F2627E0A1EC84
+:10F01000B5876C309FD3522DA3F3E7562701BF2B42
+:10F0200093BD49764CD9F7B2E71F46FA2B3DF470F1
+:10F0300012F357BA061950767A07C13C17AFBF1BB7
+:10F04000E75942DC488765CF89453E9A7E2A916917
+:10F050005B22EC934B7C9F9C7E812E2E9DE7694525
+:10F060002EFC41E472E1BBE80F7D98CF856A909851
+:10F07000FFD4CCD6EB806CD0C8D110FD6E7C14E5EB
+:10F08000C7B961AE8170EE561396172847C4435333
+:10F0900007B275627207DB51B99307DFA17EBBEC43
+:10F0A0008A1AAB69877246E97F19EF9F8E3B1AF483
+:10F0B000B7D34991ED91E146850F503D434567AA8D
+:10F0C000FDCEF6FFC606B6DF95FDEF9B310DCAFFFC
+:10F0D0007298ED23680772978E2B3010CB77CD1680
+:10F0E000903F984820D23EDF28F37DAE2DD7D30B3A
+:10F0F0001DBF24C4AAE806FA89C77540795FF234B7
+:10F100006DAFE2A335D0AFAD275C651F97727E70FF
+:10F110001EF8C1F5617E40D627F62B5EB452F6BDCF
+:10F12000F42CEC5FBA5FBD0ED8BF7211CCFF93CD4B
+:10F130007B8EDC4FF7ED272DCABED5F255FDBE2DD7
+:10F14000DBFA30C69FEBF7ED27436B49C47D4BBF1D
+:10F1500047DCB7433BFE47F8AA82C724A396AF2AF1
+:10F160007CB2377CEAF9E416D98178D5F349FA3BC9
+:10F170004CB27AD2A342870AFD95FF47D570E0478B
+:10F18000213A55E83044A70A1DEAE7ADC5A3BEFC05
+:10F1900023F02D527A297A53C6F3954A3F8B03A662
+:10F1A000EDF60FC9447CB950CC91C6FD4306A8F3D7
+:10F1B0003E5DBE4557DFA5CB17E9EABB75F95A4D51
+:10F1C000FDCAB63D46827410D0D41397FF3B393147
+:10F1D0002112DDFA98BFA1F5A211EE39D45882D8D8
+:10F1E0005E5E41BC101F19DC21E2B95137C5713D8B
+:10F1F000F83736A7FABC948FAC8E627E856E7BD0D2
+:10F20000164FD3D5712C1F4C34D6031F54BE07A301
+:10F2100098DFB1BB28688B53D95B9D7E11F9788745
+:10F220002FF2BD0D2A6970DD3B7AB9D7A19C8F758D
+:10F2300047DBC6627FD1293EA0C7A9A2256539F860
+:10F24000A11A4527E8EC8BEAEEB5C17955B73FFD29
+:10F25000AE39F4FBE27744168EE37549835476D0D9
+:10F2600019E25D972D405CF05AA49F857E66172DAC
+:10F270005A1B793F94F37625966546E0BBD40E3948
+:10F28000AE3EEF51E094ADD77DF74FE7FBA611ED11
+:10F29000FFF28DDA7237B79F7F64E4FC671C19C7F1
+:10F2A000ED57E6BFE17C7BAA9871D71CBA3EDD071B
+:10F2B0004462A2F94B7E11D7E7D266C107FE37E25E
+:10F2C0004DC4FD574D8246F57D882ED85FD7F4CECC
+:10F2D000C7BAB6FF39EB074047AF7F30F6DF69DAD0
+:10F2E000F5FA1F47BD05F9378EA67C407AD6CFDBED
+:10F2F0001985F102DD3BAD48FFDD3BDE4BF901E452
+:10F30000DF3439619CDD3BFF3A16E8A97B85A90C07
+:10F31000F860F730E6BF5DB9E3AF633B50FEAEC2C5
+:10F32000756C361A999FC9FF8F8FE0DEC2253F9D0D
+:10F3300015E8173CAEBEE6D7513E82F0FF9AA5BE57
+:10F340000FF46DE753CDE343BAAD64CE56185F1C9E
+:10F350008B7FA8796BF28B75B4FFAAD65DC685B496
+:10F360003CEFEDCFC7621CFD56A6375D903B9E87F4
+:10F37000F8876DC6EFAC94299E2FC026A346F65D94
+:10F38000A63579B08F7AE2E573F4A7F5171FEF1A67
+:10F39000997DFDAF8F0FC1C5F89FD5671660DE7FE1
+:10F3A000FBE803F4839A902E95F97ED25287FA4CAB
+:10F3B0005FF33EFBBF860EFA3B6F21D09F799B4DDA
+:10F3C000FFDAEBFDB8D181EBA2DF073DE97CC7F79F
+:10F3D00030FFAAD589E3ED27BD8F36FD3FB6EE5B42
+:10F3E000E9BADBFA9EF777FEC5E7DDFBBABF338FDC
+:10F3F000AFBB1DCE536BDEFE1CC7F775F95CE9FF92
+:10F4000052BA57F4FD7643AD3D938E6F0E69B482C8
+:10F4100062715FE2254BA603A2702F0FC0F83B3844
+:10F420005F8D6057359998BFCD241858BCDADD82BE
+:10F43000E247443BEB4EAE5FDC39B40CF5903B5DEC
+:10F440003F417D8248B5ED39B47E7BEE4227C66AE6
+:10F4500092F1C7DC909F3D85E7B5F6E6EF04E21236
+:10F46000A87E7F67EEF403A0E7DEE512510FA62920
+:10F47000EABFEFA714B0EF93B4F6D07D6E6DFEDE59
+:10F4800039DAFCDD1CDE3D848DFF9E22C1077E58EB
+:10F4900053CE5389E097352D9689900A7146B5ABC6
+:10F4A000C1EEB8BB48DB7E1928672A7FE337C5E386
+:10F4B0006F43785C8A78213922DE03ED138F7CDC80
+:10F4C000EDB3C7F920CE9A484E86C77BAA9CE83791
+:10F4D000E7F6B8CCDBCB9635EDB09F659D1DAED879
+:10F4E000D3BDE19B70FB1CE1A485F12FBB44B4CFDD
+:10F4F000659D7DAEACCBD75D0F651DBFEDBA3C07FA
+:10F50000EB7263785D865A5C04F6ABCCED877C8B3E
+:10F5100093E587161176AEE8C3FAD20017F1668438
+:10F52000E3D197988B2BE09CCC3C5A407FC85D6B15
+:10F5300045940FE60C01C7553449C6F8E38F0D45D5
+:10F5400059B0DE851326567F9F0DC309F85CC2F1C2
+:10F550005E426A517F2557BFFC323B0BCE2508EA3D
+:10F56000BF4B5C84DC41EDB8926C21100DF16A1246
+:10F57000F1C68E073FB9408E6BFCE4DA3CFC6E4965
+:10F580000AC3E9AB7E6FFCE59F9DFE17E567C729BF
+:10F590009174423A12BB97D476F77C3FC3634DA572
+:10F5A000E04B43BA0BC8EAFBD30566B60FFEEB8708
+:10F5B00013904FE6FC744C2CF30764E27DC41A6E82
+:10F5C000375CF23A62C10F76C99FCECF73F36C6A93
+:10F5D000BEAAA487B81DFE9F109748D3EE7CA15108
+:10F5E000043B8B04D1FFEBCD8FC27BC5FA76A3CC55
+:10F5F00006BEAF6BD12F003F11EEAFF27994D2A6C9
+:10F60000B1F1AA755B7BC759696CCF7580DF71D585
+:10F61000F9DDB7C52FD8FD80D743511D054511E64B
+:10F620003B89E3AF70F7DFF0FEEA4C7FAA0C7899D4
+:10F63000992F6ACEF99D66EECF984026C0B80A771A
+:10F64000DF669B0CEB724074C27DD51AFF45A33B6D
+:10F65000C2F9B11E9F001FFCF027646709E0F3C4E4
+:10F660004FA208D8D5EFF173C90CB8CF9181AE1E67
+:10F6700017F81D73CCCC4FB8CE6CC77456618E9CF6
+:10F6800048FBCD68B58F8350B5C1BCFE3AB303CB00
+:10F6900087F0764ABDC195AC5EA7D15E1D69FEBFFD
+:10F6A0008B12F87999F37B93847FBD75CBF9A935DB
+:10F6B000900BFA41BEE267D1D335C1FD71699AE082
+:10F6C00003F90DF630E60B05D41FDE53EEAFCF6421
+:10F6D0007256A17B3D9EABCDDAF7021EE7787F889C
+:10F6E000D387826705BFFAF12AF529BFBA55ED9F86
+:10F6F000BAAB6DDC6BA0DF54FB05BB8182AA963AE6
+:10F700008CB00F6BDA9E90E17CE63E07834BA4A29F
+:10F71000B1EAF8837566160FB267FCCDF3804E2E02
+:10F72000AF35812C24AE45176DC087DF33387F0F8E
+:10F73000716CDEDF8964D357F0AB0F3CF6F27C5975
+:10F740000D3715E733AB32470677DA0395BBE48113
+:10F750002A7A5A678EC772E5FBE04A07BE0F42FB62
+:10F76000C371781F3711B84F92D1D28EF76C1FA892
+:10F770008D637458D6B2CB88F954CD7B224A3FFAB8
+:10F78000FD34BB501BAFBC30AF6328E0A5D014588C
+:10F79000E68C40A793A39473CAAF29275C946EC7E5
+:10F7A000FE7F2427962972A203E3E395F602DFE7A2
+:10F7B0002A393130929C585AE71808EBB07447FA4E
+:10F7C00040D8244BDF999A14494EBCEF61E7CC47EF
+:10F7D000F97DF6EED9544EDCA09213B3A3904EF40B
+:10F7E000ED3E51F6495F724259B7FFCBFCE67D9082
+:10F7F0001311F6F7173A39718FBF18E5C43DB345B9
+:10F80000CDBDAC4FFB94133949F7615E76C644A079
+:10F810009FF7B97D7394DF0B807E405E6446D911FB
+:10F820006F7AB9D11B5FFF537FF9FAFF109E15BEA7
+:10F83000BE94DA3FA6D4487448909E97DE47F9BA42
+:10F8400000F4C8F8FAD207B99F53C7678B80CF6618
+:10F85000AAF92C6B5FED6672A1A62DF599B9B4FCDF
+:10F86000FE46D909A2F2FE30DFCD52F3DDCCA85E10
+:10F87000F86E19E3BB97FD13507FEA6D7E7FE6FCBF
+:10F8800096F2B311CE08F431676E8CE6DEDE897134
+:10F89000BFC9D806FBE53D11CF793FE67AC0C171FB
+:10F8A000BFC9047DFA493E9E797C3D2F7848793E58
+:10F8B000C55FDE22A64F576D16117FD5AD6CFF5781
+:10F8C000370B3E07CD178CFF1B9ED756EC60E7B574
+:10F8D00074068539AAF5AF78AFA31ECE092A36087B
+:10F8E00078DE0CF71E009FA51C9F25CE0A3C5729E9
+:10F8F0006DD2FAC11BA26D2F901B101EFAC3AB78FC
+:10F90000FD425310CF1D0A7F293837209FD4B6AB54
+:10F910001A71FB59B04F2A9A75DF9D0D78AE0437E6
+:10F92000D441AFAD6AD1967BF8BC178B818C6D1436
+:10F930003EF93DB3F3F478F7E8F153F62DF173880F
+:10F94000E227F39F879F25FE5D785EF075F1A2C7E1
+:10F95000475D143F1F184F32613F7E6C70217FF16D
+:10F96000BE2BE2BB4E8B9E18A9790FE5A71C2FEF8B
+:10F9700019DCF583A05EB580F54AD76FD99744F3BB
+:10F98000735BC8383866286DD2CAE390FC6F75A0E7
+:10F990007C9F5BBB4580B8DAC5FCBE6099EF097CF3
+:10F9A0003FE6C1E554DED3FA0BC79BDC705E7E28D0
+:10F9B0002A88FC53A1DF9D40BF946FFAF9384E0CA2
+:10F9C0000EE6A39C6A13ECB82F03514C6ED17582DE
+:10F9D000776DF64CFE6B015F17E65F6A63EB584389
+:10F9E000D70DF675819FE75B983EF880FF223BE7D5
+:10F9F000F4EF92D9FB380249407EE744FB5C918FDB
+:10FA000070EE9A93A45ADF1D9D8CFE37094EFCE0E0
+:10FA1000A3FFFB36EBDBCBBA2AFA4C7FD757C1D317
+:10FA20004EDD3A1F8A6A2F9C80E7728213DF0BF249
+:10FA3000C7E179D1C946F6FECD41AE1FE9F705D839
+:10FA40001FEAF77866C0C0212E7A5A14C69562BFA5
+:10FA5000694C3F53F329FD3B485F376EA986B4A339
+:10FA60005E168E7F74DF6E06B93F4DD0C449D11942
+:10FA7000E1BEFF27C097A3BE023E4936A37C79C8EA
+:10FA8000CEBEEE196624F01EDAE53532D2D1BD06BF
+:10FA9000C7916CE02F8FC904F6C7E583371E9D3BE5
+:10FAA00000CA45A48FE2F72654836BA598C5AA9196
+:10FAB000E247985C3AC1FBFF1395D7AE6B7897A0ED
+:10FAC000077BE27C70BF74B673D75407F85B320FC4
+:10FAD000AD8673CF5979F62347601D1BD8BB4FC73E
+:10FAE000D7E4A19DF6D07705DC67C7E87A019CBB17
+:10FAF00067A71E3942C7F7E09A443CB79CEB4ABC63
+:10FB000007CE31E71E149D0E5A6FE15D560B9C7FA8
+:10FB10004E1F2D12B70A2F0F9276F4EFCCADFDEEEB
+:10FB2000DDB04FCAA83C84F79CCAFC87A60E84FCB3
+:10FB30007A01DBD778DD46B8E7D9DE74D19849FB86
+:10FB40002FA1F500DD35EB59BD9A8D02BE1758E2A5
+:10FB50007F02F964C946011FC469A7FAAF99C1F5CC
+:10FB60008129D1BE9EB6A7F952680F7037C6DD0352
+:10FB7000E79335749CD87E521D9E5397D076B498E7
+:10FB8000B46FFC2EC25BB25E2070AFB06C52EAE381
+:10FB90009300DE41D909E54777FDDC08E39E47FB8A
+:10FBA0001B44E12F143BA6427DF203C18EEF2E15BC
+:10FBB0005E8BFBBA9BEF3B621FCDE21404A2DCEF2D
+:10FBC00093D4F12A25D169B89F4A96D7D5C3BC3AB8
+:10FBD000BC89A906A4A78B4690E32729BEDD547FE4
+:10FBE0003D616471307BBC278C1D2AFEB9323A1D01
+:10FBF000DB2F6ACB413EB39814613C85BB8EE92371
+:10FC00009DABA37CE057EB94ED29F07DCF6A137E8A
+:10FC1000BFF02A933B178675A07FFBF47A99C0BD8D
+:10FC2000C795EBD3D7C13A9EDE2C3BE1DC407C8EFE
+:10FC3000C51194BECAFC647BD633B8A79B197FCB91
+:10FC40007BEEEE02E0DBA5944F99707E5A3E56E2C1
+:10FC500028473EF55C14E34B7A7EA5E753658D1B80
+:10FC600022CBA1650591E5D0D07AEE378D2C9F6B24
+:10FC70008885E9BBE3C978F06316570D9BD704F478
+:10FC8000FC20BB70D01E78F3D39F81DCADB4E23B87
+:10FC900065D5927D9DC0E88300FF9FEBDFF229ECE4
+:10FCA00087B2B951F80ED929580FD8476B13F01CF9
+:10FCB000BBC4578C7857E2794B9BB4F4AEF821EF74
+:10FCC000738BC4A5965F6531C4A5AA77F447946E7B
+:10FCD000693FF3DB041FB0CAA33FEADCFF7026E6EE
+:10FCE000ED38AEE55C3F586B45BA3EFAC8C5D54025
+:10FCF000B7F37E2810D0DB89D75D0FF2B0BA497018
+:10FD0000809FB8F487AC7D296D0FE33EFA73465FA0
+:10FD100094CE1DB00FAAD73FB11FEB6F141C00FF8C
+:10FD2000E88662D427CABC22C1F28D9D684750790B
+:10FD300085F1687BBC6212EC83EA55263BB86215FC
+:10FD40007A52E8B393BFA740CCCEB1B3683B67B457
+:10FD500003F9B29E2EC53942489E02FDD47819BDE2
+:10FD600075BE2A3B618BF44D9FEC1EBD427F22D0B5
+:10FD70005F6698FEF6ACCF33023D9EF60918679198
+:10FD800007F40BF4F9B2E29F2116B51ED5177DEAF0
+:10FD9000E9B007FDC1CB58E961FA54E8514F87C774
+:10FDA00025720F8CFBA1D551388FBCFA37EF59CE95
+:10FDB000F6199ECFE5D53F9204FBBA446271400A22
+:10FDC0005EAB241637D6635C4FD71907F5677CBA4C
+:10FDD00071CC8A0EC9EDF120B7A93E4A02B49FDF6B
+:10FDE0006C7E11E32BCFBFD27927EA376F513A00EF
+:10FDF000FC6FB69200DA213EE447E5AD22C66913F6
+:10FE00002990354B65BF2B713115BFB222BECBB7E0
+:10FE10009A7C85B47DF9EB27C6625CC20AA67F7B1B
+:10FE20005F11D83988B7632CDC3B2A97587C8E5EEB
+:10FE30002FF85D34B3C3BBDE8C99037A9BD0CCDE44
+:10FE4000172C6FB95736A9FCBBFBA265A51E9E9364
+:10FE500079E93AC3FB0A303EF5FB764A5C4ED7CBD4
+:10FE60008CFECADB64D4E7CA9BB75C8078CDF263B2
+:10FE700026B4776B9A2F1AC19ECDFBD5ABEC1DC46F
+:10FE8000365113A7D7233EAE590C9820AEABB50A16
+:10FE9000CF7168BE13F32D3C1EED6BC66F55FC6A27
+:10FEA000C7EB5E8AC28A6DBFB4E17B85ED9B6C783F
+:10FEB0005FAAF9ABE3557BC4C3B534F078B83B4EC9
+:10FEC00013E48F91E3E1CEC13F28217D16AD8D87EC
+:10FED00023CD8CBFD17166457A0F35A477BDFAE981
+:10FEE000F310CFDDB5F593E761DC955F5C7E1EE234
+:10FEF0006CA88268073DA5E695F731FE5569171F86
+:10FF0000C3EDA0977F89F1C317FE687202B40B3B63
+:10FF10004EA780FE7161CBDF92202E78D98EA9E8A2
+:10FF2000DF59B63D0FDFBDEDCD9E05FAF5F5237E19
+:10FF300059BF6E7B5AF7603CD079BAEEC027427148
+:10FF40008E2D552C7ED4C1E31B37478E17EF11CF72
+:10FF5000D83AEBAE29C01F5B999ED0675CE361BACB
+:10FF60009E37F4631D37F3F8D5963BBE32AEF13CB5
+:10FF7000FC83AED7B8186D7CE8A7AD8B7FF12C94CD
+:10FF8000B526F41AD718E807FE9478F4CFA35DD904
+:10FF90003189B0DEFF81F1A4B07E850EE0D79FA647
+:10FFA00080BFF88C1C44BF44708709EF6B96EF3814
+:10FFB0008AFBE9C2F64318EF4D785CF80512FAB1F6
+:10FFC000F85DEE03AAD96865F1907C1D205ED261D0
+:10FFD000C3EF3C2E92D1B5122FD95B9CE4B298347A
+:10FFE000FE3E0B8BE7ACDAF8018F3F0CAF9B30097C
+:10FFF000D6ABF32BE350153CD8010F13D571C0914C
+:020000021000EC
+:10000000E3524371C0BA7583F5043E1E8AF3A5F925
+:10001000A110EFE9138E468A2BBFB081C50F5F9008
+:1000200023DF8F56E2826B6274FBD6D7BF78E0BEC7
+:10003000E6F175F1343FC6A1A11B055F5D5723F3BF
+:10004000F72763846F64B785EE9B540AFAFB2C4F45
+:10005000C4C07D99D64E23BE93A2D8557CBE5DDC2C
+:10006000DFD6F58A8871A2F52D7B90BFEBF9473575
+:100070003F47D18F77231F6F751B931F5D5BAD3E8D
+:100080000B85D3B5FB4DA4EBEACD9D18A7BABF797C
+:100090009BB14375FE0CF2C3A71A7FD76BBBC62278
+:1000A0003FE7EFA2E9FBD9CAF9638D3F723F359B69
+:1000B0002F6AFAA9F0B618ED96BEFB3B27B9EE05FC
+:1000C00078E7DA991E75AE459CE68BD0FFCF626467
+:1000D0006E5737323F3895A3F83E9C95BD0727DA17
+:1000E000A2512F5B669D740CDE215D6635625CCC8F
+:1000F000CA3A1E47F3236732ACF74AEBED04C6BB9E
+:100100001AF0ABB2EF65BB9B803E27271765AACFDD
+:100110006194F11B0718884FBD8FADD306827D4ACD
+:1001200024EF5018C79D697F95402EB67B987F9F1E
+:100130005C3D3102BEB74BF67D09146E7BBEE00418
+:10014000D76C4FBA67F0437E0697F61D5DBC5347E8
+:10015000E777C969403DD16A08D86915628D6A4F51
+:100160004603D7411C52125EA5C07889C73CE611F0
+:10017000703FD446A8DA0AF59C92E65D95D849927C
+:10018000EE9D15727804A5570BA757C55F6765FFED
+:10019000A6703BF0FD96B80C5207E4BBD6EA467D4C
+:1001A000E2299B0BEF3FD2DF6888938827D14EF579
+:1001B000BB50B45FCD7D3BDAAF261FE7D2E613A676
+:1001C000492723C99B043E8E02D18278889B6AE02E
+:1001D000FAB2AB70645278DC7189C41980F23B2C9E
+:1001E000788F806E2FAF7A1E168B76DC747C1A3E69
+:1001F000119BD1E135B0716ABEDB8903DF47A7E30C
+:100200003DAE1BAF266FB5707E271109F89DC5DC8A
+:100210004E38FE2F69F0BD4A2A8A4F224C64C238FC
+:10022000E93021DE2596CF83F6AFA96F07EF01EB0A
+:100230005F0B870CB5ABEFB5DEC0E5E0114B518A23
+:1002400085EE93ACE1B518B89D9D2CB84E4EA065D7
+:10025000FE01C89FD296E7615C8AD0C8E86AC45A9A
+:1002600082FB664490C755AD8A463DD56426DEA81C
+:10027000F1703F8E78E5F1D08B8F9F3F395618286B
+:1002800028690DA535DACE1FCC352CA68BD00245BA
+:1002900014FE108B6B0CF45F3FC39D6C1807D31BCF
+:1002A00056BF7728EEDA6BC16368A81BBAFFC0148B
+:1002B0006421F82E08F10EDD0F72B851C953C60E35
+:1002C000EF06344687F22E33E5F78D692C7FF3DA9B
+:1002D000A1F5F07E4DA7BDE8660B8CC76CBF0ECFB5
+:1002E000C302F19AF7D57B932FCA38476F0CE4C14C
+:1002F000FBC7B707D9FBC523ADA17BFC288F3759B6
+:10030000947C00ED8BA2D643C8D7AA5A0E61B901DE
+:10031000F2341D9E10C81B42E779BF654C41F2B50F
+:10032000145E6B71323CC1B1D03266BFA4C1C3B898
+:10033000FABDD9613C482B6ED0E1E186AF85878557
+:100340006B6FA887F755FA3B6F4A170B005FD373A3
+:100350000CF88EDBC46316F4BFD05F14CA230E679B
+:10036000432FF7BC153B85C22957D397D24EA1AB7B
+:10037000DEE8269DD8AF63EF836AE9E7DF2DAE871D
+:1003800000DE328B2BDD9688F3C77705A6BB8B8BFF
+:10039000F213C2744D2CEE09F0AEFE11CB821F5A3F
+:1003A00054FEDAE9394BC5343ADE1F0123B8313C3B
+:1003B0009FC4E5DEA851749E892E03C6D51FB1B82F
+:1003C00057403BDB9C600062CB2612F704410CF7E0
+:1003D000A3EC8FFA1DCC8EAF2F36F856B0F360FC2D
+:1003E000BB1D61FAE8D0D14790D1475B27D247B512
+:1003F000BF93D1475B5D6E343F57033BBA9104C74F
+:10040000C1BA37590A0BA461946E6282F54037B2C3
+:10041000F7B682C228C4EB3A185F8FF5E1E352E6E3
+:10042000D5DBFA361E48FB7106D899070D781EA653
+:10043000E04DA9B7C3C2E246FFCDE67E11FAA99905
+:10044000D4B11F966FEB813F605C87EDE0CC5DD04F
+:10045000DE369BAE9023DC6FE3C115F84E78237F28
+:10046000D73B9604BD20D77BC707DB3F217C80DECE
+:100470009301F8E8C4FDF20ABF6796DD26B840CEC6
+:100480000F8F61EF90BC6E6176F5BB1691A74CAFF4
+:10049000493CB85B04FB2B7B9501EB27429AA19E5C
+:1004A000FF2A5E5FD2F8DD957555E88972D218781B
+:1004B000CFE4F978F71E2DFDC4C7A4A9E029ED1EED
+:1004C000F790A245945026EE5DF010C8554A3F3E85
+:1004D0004DBB317214E02D443F943E23AD0F6D7738
+:1004E00088AD6B7C0CE80B5BF62E15F15D8E7EAE55
+:1004F0006B16BC4749EB67C590DAADB47D562C4D01
+:10050000219FC0F303797E084BD33F741A04FA7D10
+:1005100003F7CB9EE5782592FDBA996320CFF4B816
+:10052000ECE418940BCABE856754E05C5BE2E7DB41
+:1005300069C13403AC9BB28FA5A02160A5422B4DAD
+:10054000721820CEE15D8FBB08CE0B7BE33BB75F1B
+:10055000CBEE81EABF7FCEC7F38DF5EBBFF4B82FAA
+:10056000FE39E0B7CADCF1F84C9AAFBEF632FA6950
+:1005700057C454DFFC55EF68E8C7FFEED5DFC40071
+:100580001DFA3F3345BC3F35CECAE8F180670EB651
+:10059000CBE2EF0492814A1CB22ACE15CAB85E861D
+:1005A0004B9986DF51CFBA055920ACA7578A87F6F9
+:1005B00031A978AE78AB2EAE55392FBB25C0FC8063
+:1005C00059B1BE42ECEFFA74F6F7493E63FA9299DC
+:1005D000FE0FCEA1A6F27333D731FB5E1087590907
+:1005E0008DF9083F3615FD5A3944FBFE41D640AF20
+:1005F0006480F2F454849767D695A713F45B916BEB
+:10060000AEC3F94D252AFD0CE546A313F8F1F4D14C
+:1006100094FEF9F7CBF4BFE126327F86CACEB8CD7F
+:10062000715F51BE466F69C477857EFBB9383F5212
+:10063000FCC563213C1715413C801E8FB90E6195A6
+:10064000D5D113DF7AFCE9F1ADE0518FB79C0F9D56
+:10065000F9F18E9EF8D1E3237C7EE95B0BEB3075DC
+:10066000B488F24BC17B4FFCB0F5FAEDB5B49E00F7
+:10067000F442F10DF84C1730BE272B86D34F6C3A5D
+:10068000E2370B14C001480F98D7E3558FC7AC046D
+:10069000DE3E81D5DF0FF81A89FC00ED2165DDB261
+:1006A000D26BF7C641DEC4E84CD1ABA772BC50BDDB
+:1006B0001AF5E6BC442BFA9B40AF9E9A14C65B5ECB
+:1006C000151B57DE48CB0B609FFE0AFCD1B1080614
+:1006D000DFC5BC95F05FE0563C5FCAE25905DFB765
+:1006E0007EA6D593A7FA0BCE82FE3DDCE45E6505BF
+:1006F0007F8C1087E77914FFC775F8D7B6B36BF313
+:100700007A7CFC0AFE31B927DE147AABB372FD7C29
+:1007100030190AFAF2D8373363817F137F7C44BFE4
+:10072000C4C4634521389C6E919E05E20E7DB7A737
+:100730007F0B3E76904A49151FBB5372AFB3DED88C
+:10074000938F29EB3585AFC714E2DD057EA62944DA
+:10075000FA4BC81E480DCFFF792BF7B30D2143602C
+:100760009E5F581C8CFFF37986E64DD54BE83F9B86
+:10077000F79F6DB6E0FD1B1294BA42784EC3F79313
+:10078000BCC6F8F0386465BD536A09D3E7E6E2FBFE
+:10079000D9142FE4CB98F038B6590509DF0FE2E3FE
+:1007A00038DF6CF6429CDBD392FB0D2BF83D848343
+:1007B00063717E526014C83F7DF9E5B6BDD5504ED9
+:1007C000EB95603D3EFE0A91F91F823B4CBE1752ED
+:1007D0007BD753E9F64639A1D07136DC7BBD01E801
+:1007E0003E28C2B8FDFC5C65E74576CFC145ECAB61
+:1007F000AEA7F0F65D62F702F228DB817A7AFAEDB5
+:100800008B4EF349701EB4D3D3AB22CF1BF8FD5BE4
+:10081000453FBB6875BF0FEBDEC0EFE3FA2F8EBA22
+:100820000ED6E71BD3D5612D5D29F444E9EB38F4EE
+:10083000D39DF9F13A50CBDFCBBC9C04F251D1E30C
+:10084000C3FA8AEB63A8D79B3E3FDCE6EEB27E8517
+:100850003EAFE8357DD92364AF4446D371CEE3EB98
+:1008600033D7DC2EB38BC6418CD36F8856DECB7367
+:1008700044833E39AF21ED95663857AC637EF90766
+:100880006B658D3DEC86DBBED89EBD673B7FB9B600
+:10089000FC238AEF41F1F8CEADD68E86FD91147E11
+:1008A000CFB767BF062FC8C97923A3317E4EDFAF0C
+:1008B0007E7EFA7EF5FD3570FBAAC1D838DAA9D262
+:1008C0004FEC3616477D69CD93CDF0145E6FF8730B
+:1008D0009B87B8D47F6FAEA3217A4EA4F7681478B3
+:1008E0000ABEE7C2CB98E00FA895FF1EE99DDD6C1C
+:1008F00037F313F4D6EF88603EEA8386A70322E835
+:10090000F5238204F5F0ECA0CBB050630F307BB937
+:10091000873D00EFA4D07C65EB2E660FB4D4A15DBB
+:100920005149ED0A903B1BE01D90C17C401968279E
+:1009300084EC5E88AFCA867732B95D0C4FA7A537C5
+:10094000B2FA331F4F37358C00BBD59D0C2F93CE99
+:10095000B45DFBA899DA57F5A9248A50FBAAC8769A
+:10096000ED77D64EA2DC3BDE25C0BBA434FFA865E4
+:1009700072FFEDEC99B6D18F82BF81DA67B7D95497
+:10098000766F6FFBE3669B03F1D9DBFEE8B417CD0E
+:1009900004388ADF82F221E407FE28BEFFA342F476
+:1009A000170B7853E8E5F6E50BD1CE88BAE66A0A6C
+:1009B000C49365733A70DBB85F3686C1A9896170EC
+:1009C000264A6E37F4D3BDFBEA28F03BBF3BFA045E
+:1009D000DA797E2BF3DB1FF49415A9E3DB6B6D0250
+:1009E000A797C010D87F77DCB82701EC956C59C069
+:1009F000F74EFDB2EFE9F199C09F66DB57D2296649
+:100A00004F36E2FD327F5460C8C32A3DCECFDF4D62
+:100A1000F55FDC3F441DFFDC6ECDABB531F822C085
+:100A2000CFCEDC7B0CF480DEE44E58AEB804902BC5
+:100A3000E4EAA1243C5F6ADD67039F68177FE7E073
+:100A40007CEB9EA40534ADDAF29F36B0E3EA383E83
+:100A5000CE4BEDF85E53E57611DF13A1FD263D0088
+:100A60007EEBD68559ECDE1FBBAFA6C8D5F19FEF54
+:100A70001952C49C8978FF4CD137A798BD3E189F66
+:100A8000BF8EFD1DCC29BAF7C96EE5EF93E9F5CF0E
+:100A9000676CB2E22FC3F8A96576D64F6FFB2BFBCC
+:100AA000B304E253EDBF6C2920C2F8B33F4BC2EF51
+:100AB000E70FA43D5508F63D919D2301AC44F6A2F5
+:100AC0007ECBCFA7E86F2FBC7BBE9367DE6EBD3CAD
+:100AD000EB66246E2AD704D0C7DC0398D391C907EC
+:100AE00045FFBBF533ADDF55AF072B7232D73F6EF5
+:100AF000D510027877CCC2FB1307248CF7D2EBC950
+:100B0000538305BDE8C34F207D6D6D4D8F017BFE86
+:100B1000DF609F00DDB65EC6F783AA49E01E78C796
+:100B2000A9BA55B40760FC24F37AD8678A3EA1E0DD
+:100B3000A5EDEA1EF358DA7FF645837D0505F176CB
+:100B4000F02F68574FF8FDC1049067FEA084E707B7
+:100B5000D917F7C62C54F145FF55037E7FFBEA6E8B
+:100B6000EDF760FCF5D06E8B81D9CB7BF7FF3D06AE
+:100B7000F8D4DB572F21BC903ED1536F46FD3BCFBD
+:100B80002A86FCD16ABD9988D98721DE6B6A2C152B
+:100B90006B42EFFA70CE87649595F4D42B42782798
+:100BA0002E09F0D0431F56F0ACD3333EB2713D77DF
+:100BB00018190FEF5EB65D4DA8C07BC7FE18FB0A83
+:100BC00094CF4C8FEADE7BEEC9E9F0FDA0C8DE9D34
+:100BD000B82AE27EDABDB36278876ADF524E8AEBCA
+:100BE0007665D0C50B6FD1FA57F64533FFBAE4BC32
+:100BF0005E7D4F225CDFC7F11518CCCEE9BC83E1E6
+:100C0000BDA86FACCF74F5B0F7FF61433D39580014
+:100C1000E262D4FA4E23ACFFBFD98A3E67FCA52519
+:100C200006F88B97E40E21B4DFB268920B7415AC12
+:100C30002376B033B61F3018605D3237A5625CCFC3
+:100C40002BFC1C73494BA3315545174BF839D81968
+:100C5000D99B12AFFABE3296F19733FBCA7F8171EE
+:100C60001D7F34919111F4D085B14CFE6E337AA77B
+:100C70006F867AC70D78DF68EFFE5FEF877793970F
+:100C80001C738C03BFE09458B60FDA0EBE520F717E
+:100C9000C16D1F82D4A2726663B168A0FDBE451CFF
+:100CA000CCAF7798FDBDD6903F94B812609E37C503
+:100CB00032BEFDD60183E6DCEC2DFEBEEFF5B18C35
+:100CC0000FA5C632BFDAD603B9090B70FFB947C406
+:100CD000821FF064473D6C45C50FA8E86F930F6F06
+:100CE0009D3E86FE737297C10ECBED38FC8208F3F1
+:100CF000759C21244E203DF4390A6FAC1ADE5B5DF1
+:100D00000C1E1DC76ED8AF0AFEA904FE7106CDBF2A
+:100D1000D52EC5433C98827F651E4AFF8E16E2DAC7
+:100D200060C1ADE4DAFA15FE68E5EF314CB013E5C9
+:100D3000EF33205D6EB7B96E89C5726F0AE4CFECF0
+:100D4000637AD2362E4F4972F170C09FB24EF3795A
+:100D5000AA8CA7B7FEEFE7E354D2AF4BD7AFC80ECC
+:100D60002FD2CD76164FEEF006CCE91077D6968EC0
+:100D70007F9F4A15977B3F8EFF8CF6FDC2B60E8390
+:100D800001EE8F55EF10E250DDEDA7BE1DA233A995
+:100D900005E9AFED18C17D5CDEFC5DE68FA4729FB6
+:100DA000BFEB86E7EBB07FF839FB2081A693FD1BF4
+:100DB000560E41FC066CB0AFC278A2FB06D2DA46F2
+:100DC00023D0EB92652C2DE5E7D54B9ADCB83F4B51
+:100DD000D6B378C465B1A94C3E737A2586E8C1F8CC
+:100DE000DEBA4D7B8FF01F5C7E9E6D7D6A0FF44BEB
+:100DF000E9EBFB808F9BDA9E5807C355E8F5EC467C
+:100E000019E194456BCFF33DB1CCCFB8FD30A3F7DA
+:100E1000C91BE55C784F6CB297D8C1BFFDD6C64DF3
+:100E200022F0EFB7809E53D93E07797B66DF6331AE
+:100E3000DF07F9D66920E047DF6624655B54FB6273
+:100E4000EF863734FBB7BCB96E3AFAEB3BE205E00C
+:100E5000F3CABE55F0BECDE8BC0DF7FF9DBAFD9FAD
+:100E6000CFDAB7C2BAD07A4FF1FDFFD434BAFFE976
+:100E7000A7B88D7102C0D9668CFCCEDC4BDF90FE2A
+:100E8000427CB5A3075F7D2996F91F6CE9B4FFEAA0
+:100E90003B2EA1FF21343E4E374FE52B74932A00A1
+:100EA000FE1BE90A8E007C51BC023D533D7AFECC0C
+:100EB0000CDC9507243CFFE1E74B3C2E0477946A59
+:100EC000BF86F999B26FDD6FC038B2F26B57829E60
+:100ED0009F50E845FA3C2BB887C753797616F671D0
+:100EE000047EB08EE3E38AECEEEB7DFFC140CF657C
+:100EF000D46284F990F5821DD6452977AC67EFBDA1
+:100F00001EE6F094EF87BF2DBE833DDE213DCCF081
+:100F10001D34425CEB281F936344C8C5FD400CB7E9
+:100F20000F867DB684CAAFFB55F2EBACDC8874AAA1
+:100F3000E0E123CEB7AEC4B1793FCEC7E9071F5D6C
+:100F4000A20AFF8224096C3F8B02DBE722C03FBB71
+:100F5000EFA6DB90DEEF884CEF76B0B7E2E1EF472B
+:100F60006D40FA8C9B66C77B2F4F49CEA8388D7E8B
+:100F7000E4C374EFA667D0CE03FA85FDDE1BFD97B0
+:100F800001FD930874EFA374AF5A3F850E285DFCF2
+:100F90001DF0A57CD7D385720EA9E0659BEE1C736E
+:100FA000AA9DE1E9FF00528D6EB5008000000000AF
+:100FB0001F8B08000000000000FFBD7D097C54D598
+:100FC000D5F87DF366C93233994C76B230490CA01E
+:100FD0002C0E4980B0D84E08204A88C352D7A0931F
+:100FE00000094B36109556948120068B18152DB6A6
+:100FF000208385EF431B6D10A858832610112D62A6
+:10100000DCB17FA54190454122A81FED87F53BE764
+:10101000DC7B33336F26026AFFE1C7EFE6DE77DF62
+:101020005DCE7ECF39F7C56ED3313684310763AEDE
+:10103000E6018C7D8F3FBFF4978C2DA1E77337CFEE
+:101040005E712482D1CFF7F0BFBA795E50BD76C70A
+:10105000AF571CE9E7AFCFC55F52E0FF71A66789C4
+:101060008C55F147AC4CEF89B525C0FB119DD66C72
+:1010700098B466E2196384039F781983F66F631C42
+:10108000543EAA6FDED32B1FCA31CCE985A6399B0B
+:1010900033158F99B105361BAD67F927D393DDB0B2
+:1010A000DE46C6C6E3BA9BC57C72DDD93685C699D5
+:1010B000E029738F898367664F9E7BA0FFF90766DF
+:1010C0004F966D88BF3EA170BEEA18404B8CC47E1F
+:1010D0006355980CE69FBFC9E4336532B6059FC4DB
+:1010E000C32ADBA37C9B32FDEFD9F4CCA5B73396A2
+:1010F0006BCBA475C1EA5AB1EE58686497C1BCDFE6
+:101100006696B59BE1D1D51DDEE281B08F2D46EF0D
+:10111000D489993898F31A1CFF9A629DED01586A98
+:10112000ACCBA63807D092695EB68FCF9397EDEC23
+:10113000CFB2A1EE70E6B92D8C8D12F862AD30C938
+:10114000703F1C42F1C6E1D9135E17207C86501710
+:101150007A7EE2D5A81B7D66FFF34401BF2F63783A
+:10116000F9ADC1D3DB660E1D27603E554966CCCA7A
+:101170003C4B555CFF2866DBE4F03F778C622E1C0D
+:101180007F9A1857B6CBFA8FA6AFAE10FA9A867828
+:10119000AD8EE822BAEA53D06974C0BC4C19DD8B1D
+:1011A000C1FA98EEDA5EAC80BAEA71BD0048552902
+:1011B000E0EBC7F6848D33D7239ED90113CBC90C3E
+:1011C000DD67B5CDC0E1B6D130FA66E897E065B825
+:1011D00003C08B83E38535DE8AF86BDC686288D7D1
+:1011E0006F6339DCAC53D96803F4B7427F24F7C688
+:1011F000A99E035741BD31D9E850609E13862EC287
+:10120000FB89ABA08DE8C3AD20BE4FBC3AE29ADFAC
+:1012100040BB77A28EE5C08B5B8DB005A4C3BFA792
+:10122000F9362948A72DC427F3C7B2C12678DEBEF8
+:101230006918D1D5ACE22C05E976CEE658059FDBDE
+:10124000C7D8742AF3EF63D84295E813F8A0DE16E6
+:10125000808F61DE3A15E1D53BCE936C8865EC1149
+:10126000DB35E323D281CE3259241BCCD843505FE7
+:1012700009706BB4BB14164BF506730AF121632396
+:1012800008AEAD0CF0D418D55D774560FF2C5E7FBD
+:10129000A4F1EA868634C69E897135229E3E30BB13
+:1012A0001FC1F98726D5A944E782AE7F80CE7E1282
+:1012B000BDD42E2C6287F3E0F70E660EA41B904778
+:1012C000B76E06F895E83D9B705D35BD8E3E8EC3CA
+:1012D000D5B67C65F484A17BB98E782117D8C78CEC
+:1012E000F011EFAE53CBCD7EB9B3C566174CED52BE
+:1012F000265BFCFC8672EB7933973B59509A229817
+:10130000D762C77E3EA223ACC7E4FAE5D1CA62DD4C
+:10131000785F183E7E0D89EB6794CFACE57FFFF2D6
+:101320009BA1D01F7F57899F5EE3FCC4E5F5A3C551
+:101330009F26223C9093F0BDDBC51CEB973ADFEA79
+:101340008B74B95F659BA03ED864F42A31B86DE612
+:10135000B0258AF1900D5B9456CB20A8FF4B612EEF
+:10136000C0C3E97FA954AEBFD73D3E13DEAFD9A1BC
+:10137000732E857E352D0AF183B337F345001D3773
+:101380004759073118AF70B7D96580F6D34A04C9F9
+:10139000659C00D76190EB2FE8CA6882E7F52DC005
+:1013A0007F503D5D08A8C6F5EA9D316C801FBE8365
+:1013B000DE7CB41FEC00DA1B9DC8674F45F2F19F3D
+:1013C0008ACCF081108352BEE788014A6159826E4F
+:1013D000F47AC662004F5078B11CB530DBA5073CEB
+:1013E0002B7AE63500BE4675B5AA089FAC2E878ECF
+:1013F00099FDF3E9BB18ED3B4BEFD03903F4D5D69B
+:10140000BDCFAB7A80EBD0318DF52A9489319E6FB8
+:1014100010DE2346D5D5637B5CB157F540FF7CA534
+:101420006EB705E9EC1AE644B92AF924AE93B5C1C2
+:101430007259EC814E9715DA471C77B50D80FDC7C0
+:10144000B89982E349FD0D7CC662910EE35DCA4402
+:101450001867E83F18C1478EB375EF6805F93EBEBF
+:10146000638CE218104AE76B98E3B738AE779FCEEB
+:1014700089F8753433D70694137FBA620CC24BF6E1
+:10148000EF1DCBF5CA488FA7084415EE2706E71DC8
+:101490007EA36FB701D6336C9677B7D111B09FD9C1
+:1014A0008CC64BEDF4D23E520E780AB1CCB6C6D201
+:1014B00038238EB7B60D807E4975B01F684FEF7820
+:1014C0004F41B8A6D7752888CFAD7B77D17AD33A6C
+:1014D000DA7929F8EB79611774DB03561DED23DB0C
+:1014E000CAF5CDF2535C6F66C77AB2AD09FE7D2CAA
+:1014F0002FF424D7C1F86BF66675EF17E5EE952843
+:10150000E403E4526EAC91C6B9CBEAE98FFBABBD04
+:10151000B1730FD2E0F37BDFB1127FB4C4137E133B
+:10152000F77D4AF8485C48BA98ADD9375F4179B140
+:10153000A61470A684C259CA8D35B87EA21F5BF46A
+:1015400024A0CF27ED9E82D8407BA5CC1E9D1520E0
+:1015500097E47B8F2F66EE19B09061EDE55B59162D
+:10156000C9F77EB101F27DC2C0FB22919E9A2C2E5A
+:1015700017B69F56D88D38CF335842FB33065E9747
+:10158000F07A40E0333B7652B6750887930DE8F861
+:101590009948DE4F2B8FEE8DD509BB83D30BEBE043
+:1015A000F482FB08B4BF66C6723C8C74798AF49CE2
+:1015B0004EA6E2FE8617F87623DD0E1BEFDD8DF4D6
+:1015C0009FCE049D8CE774A2A5F7DB63B97C1D71E7
+:1015D000BC8B21DCF315E60E67EF54C672BB29BE47
+:1015E0006334D10FF04319CE3734B54E35A0DC66E5
+:1015F000B609A87F7E13EBA07E7905AEDD486F3675
+:10160000979BF879BED9C6E92693D307BC3F271C20
+:101610003F6D433E1AE0E7A378A44773283DDE26DA
+:10162000E0F41B01DFD0F13D77E1F8F11D3A9702BC
+:10163000830C3B60F631E83A6C01E849E45306F468
+:101640000F0BB4CFB215229FA5563915C4EB02B3C8
+:10165000FB1EDCD772948DF948CF3A5F3DBC976C86
+:101660007311FE7EB49E6867116C68909DF5402CE6
+:10167000B7E35795A1BC7EFA5B23CA5387E4BFBD8D
+:10168000B9D1E501F4F1C7507C3F120EDF5A39A7FA
+:10169000C5B75F2E04CB3980D75A8E0F6EE7C77758
+:1016A0002C50B97C08966B3DE123443E083CFCC1BC
+:1016B000ECDA84EBCCC64540E91DCDFA617B4FFAEC
+:1016C000F8C558F34FB3672FAC8F5F8C4D08D5C763
+:1016D000BA88AED7158047758BEA50610BF58BEC55
+:1016E0002EC4FFFA66C58976E1EE1695E861FDF233
+:1016F00028D29B72BD5F6E8F19C4AE8452F03F6BCF
+:101700008F257D5A1B2BE65F06BFC0FCA76DBCBAB8
+:10171000DDE6793D500EAD6FF92612E1DC3F5971DF
+:101720001D41BB4AAB8F81851478DF84BF2908D760
+:10173000C10D2A32D6F59EAD2695F0F62E8E378C49
+:1017400075BE330AD6F5A7A6D1BA407BEBEC8EAFB7
+:101750006FDD05EBAF8DE6FAB9369AEBE7D3BBCE7A
+:10176000F7417ABB76E174927BC3F49E8F03E5DC8C
+:101770001BFD0E7339CC4A6D47FBE3D42EE5FB68A5
+:1017800000A135A29F1EED0A35CAA906DB15441C2F
+:10179000F539001F845F5B14C1AF3E07F82E93D666
+:1017A0007902D7D96E31B214683F0BFC88FDE4BAD8
+:1017B0007FC47ACF845F6F9AED68B4A00BD5BFBEAB
+:1017C0006EBC201E607CD5A2A77D9C66514EC4676E
+:1017D000B3D1C510FFDE83C23E1078AB113477BAA7
+:1017E00065C8010FEC6FFD813427BE7F7AC7D948E9
+:1017F0009D19ED478F6A877DA9E95D56D487BB5B4C
+:10180000CE5EDE3980E49BC10EEB3BBBEFB0DD3337
+:10181000E047EDCF6ABF88FDD5EACD0D817622AADB
+:101820005952941A3A525ADAFEA90C22FE63280F32
+:10183000BD19CC570FFB5E3E50D0D354E640BED707
+:10184000E27BBBCD9D610FE0DBCD36B703D785F3DF
+:10185000A4E6D23EB3B03EE8CDE979061DEE6F0CAA
+:1018600043BD29ED3DB94FB4C72373FDFB93F65E2D
+:10187000F7FE73CE0FDAC768DF83EC740E742CC5E5
+:10188000735A2D2885073203F7DF4A78A916FBAC77
+:101890008E30B7AAB02FB6CD70B253CA83ACD07D0C
+:1018A000009E86F37D380F7810CF7F373BEB114ECB
+:1018B000FA0E1BDAAFB0AF91B80F5650968C70F895
+:1018C000C0EC9A8CF2FE99258CE8FAF4B3CCF714AC
+:1018D0006C7A4BBB8EE86603BB82E8FF0ADD995B3E
+:1018E000DD66E2EBB1F87E7E47A30EE56F8ECFA1F9
+:1018F00043B97A7947B34E47F4E0192FE074560F95
+:10190000EBEBDF54A7FE48BA98149E2E42F0F6ABDC
+:1019100040BC49B88D12F4300AE18632B94B7FB22F
+:1019200033C20F37C00B4BB5878EC7586706C2A9A5
+:10193000EDC5637D3A61BC9A978FDD8A70A9F9ABDA
+:10194000898861CC5F2F8F41BAFFB230BC5D737262
+:10195000719D5B0FC478AB3D8BE47B15EB30A2BD72
+:101960000072DDAD0F90EBD28EDB67E828C6F1F791
+:101970000D51D91280F359E7B02416465FC8723F63
+:10198000DA6D39007FF455E1F9E4C5FC186E47DAE9
+:1019900083FC5AB2DCB778967B8CA1E7F1F60D8E0A
+:1019A000247F4EB1C61E7AC8CEED8DA7ED5CCF81E7
+:1019B0006076E13A4FFDC5E2F342D3A9DCF7AD0C06
+:1019C000E0746ADBBB795EA0A353ACE3F69790DFCB
+:1019D000BE36D3B9AE78F0FB794B2C7EFEBC8AFBC9
+:1019E00052D8552FBC697540FFE22DBBE3BD01F015
+:1019F000BB8AE9BFEEA6EB4C9C97EF8FE93BFB203F
+:101A00003ED84B27121D5016BFF86A3CA703383743
+:101A10000D45FF14E78F3F635380DD5DBCB0C63DCD
+:101A2000262FC01F732E92F902EBFA0E231E89ABEC
+:101A3000CF99A9FD76BB259EE44D2FD60BE54D8FA2
+:101A4000F0BA48786ADB253CF70D3E9181F6C597E0
+:101A50003DD8C507ECC17EAF37167BDC6372FCF561
+:101A6000BF7DA7DEE60EF35E8B18FFAC737812DA4B
+:101A70007DC5C6D6CBC2F9E1E439530BA737CE57A3
+:101A800046E3B87F39671A1F6E5DDBEDBA9FE63F0C
+:101A9000D807AB0AB00B4BF49E37EDDC5FB06A326F
+:101AA000D46B2E3F3B8ECED9925E84DCBB8A79DB31
+:101AB000907FB5F421F1FDBEC45B2A4B45BC3D6966
+:101AC0007770BA11FC20F9430B476D39C1C83CE16E
+:101AD000CE03CF75C3359279411EDEBEC1407AFE7A
+:101AE000CDF31F4ECD037A3FB6D6605B0A53CE5A74
+:101AF000B73BED51F4A70D36D914A81F73B45E8619
+:101B00007C5FB94E75233D1C5B7B7BE27428BF0074
+:101B1000FEAD8275546E3050FBAC0D7750FB09C1A1
+:101B2000D795EB12FAA3BC7CB3FD8144C4E3ACEFC0
+:101B3000EEBF1EF1B2C568EB3F18CAAA26C53D2606
+:101B400000DE73364606D5B7E8D82CDC87C42B53A5
+:101B50003CDDCF1DB01E63DC4FC4636B881FD518FE
+:101B6000C7EDCC9229B0EF9A2167C9BEDFBD278AA5
+:101B7000F4C92B6695ECC8D6C1FFF3B72BA15EF470
+:101B80009DDE49369EC0F358816786CE40A08F8A7D
+:101B9000085E2F7A514F766891452578B7825C1D93
+:101BA000434ADE651E0BFD7E21DF5347AD1E0EFD51
+:101BB000C6C61818EAA15FB4CE2966A0277F794E61
+:101BC000FF6967C07E4633971EEDE24266086A5F92
+:101BD00011657D0AED5A184C8FFAB02822F8F9D811
+:101BE000CBAE3D81F6C4585B70BBA4BF9C38A0BF90
+:101BF000FE7EB9B17BCFE78F4C807D56EC53C99EFA
+:101C0000BE905CDE8FFBCA417CBF51DA04EFBD2978
+:101C1000A0F3E6F963CB5290BE0A14867EAE63E76A
+:101C2000C3F3E55C419F8C019EFBF9F13CD139BBCC
+:101C3000BB8E6C7F5DC1BCEE3AAEFFE2E5D90FCB47
+:101C4000AB4E3BF76F68F587967FFE53FAA378F0AB
+:101C5000AB195E0B95FF85E5C92D5CFE6AE58556DF
+:101C60005FC87569D75B7D4E0DD213CF0979E2D776
+:101C700017467AFE339E8F6BE286849E8FC19E212B
+:101C8000787987EAE95C0E76D7EDD86F80D911575D
+:101C9000084B5A66CB8A46B9D664F1DC1917E0972F
+:101CA000EADFD4A843F9D1EDAF3104FB6DE4F9F5D7
+:101CB0009E38BEFFF2385E87F32B9DFB3744799246
+:101CC000F5386F2FA333307E25CBFB85FC9076AFA4
+:101CD000B477A59D2BED597D03B767B363DD417ED6
+:101CE00033D6AF5F903F18ED74E473EFAE28DAE7B8
+:101CF000678A7B10F26915733D1417A007EB0D7C02
+:101D0000FDDAF5BC1627EC13E6263B41B6CF1C1DC9
+:101D10005E9E6F8DD353FFC2C76FCA403BEEB3B612
+:101D20009B3350CE7EA6F1FFF6C40F0F0B7E7D5085
+:101D3000E89358E1277808F908EAC0EDAE2DF0FEE7
+:101D40008AC56EE2ABDF2EBE91CA47172FA4E78F7C
+:101D5000C565D2FCB6C277DCD900A7232B55D217B4
+:101D6000338DEE3EB1F0DE91081DF91B0ED799C7F9
+:101D70006F33633BA3F3E5CCC7276CF206F8011F72
+:101D8000C37D0CE9799FAF09BC5E2A9D56B34E2BEB
+:101D9000EAAD6E7A3D10A2B7DB112FA7596722F684
+:101DA000AB553AFA3429A1F33FC85CAF61BF662353
+:101DB000EB8F7CD31CC5F592B6DF9B027FABD09E28
+:101DC00085F233D45F61E4CC3B825E7B5B5DEFC424
+:101DD00091BC3393DD4EEB56294EF43ECE07E7B46B
+:101DE0000FF139C689D05F976DB575C755F879C7BA
+:101DF000FD715C187F5C4FFE1FED3AEE89E770D5F0
+:101E0000FA856429FD42C7C47E16C5D982FC44E820
+:101E10000F0FE70FBA3ADE48FBDB10D5E9C5B8A8CB
+:101E2000F7667E3E4F1AE555D0DF955ADC5888FE9E
+:101E3000B07FC6713FA67DBC2719CFF1BD928D4EF4
+:101E4000F4E35C2C3F0E6876F138814747EB58D3BA
+:101E5000E18DEC03EB4AECF0141AA134C426D2F85D
+:101E600049AC6E09E20DFA1130F2DBA37C8A3C74B6
+:101E700043973C214761A591C877DBAD1E533CBC1D
+:101E80003774465D3DFAED53AB783CE284E2E96D90
+:101E9000CF0E8D1BCB32395EF0AF88BBE66F34D0EE
+:101EA000BAF2373E46F1D1FC8D57EB950039941FBD
+:101EB0006FA0FE275E9DD39BFC181F858FBF0E88E9
+:101EC000E7F462461FE1108A8786A5BF7EF13F31A5
+:101ED000AEDC09F650B03CEF173F24206FA1FA0C9E
+:101EE000C9737D3CD7237FC07C0558D31F66C87C4F
+:101EF000850DE48FDD6A6CBE06E351DE1A1D43BC1E
+:101F0000B7EFF92BC56B67CD7050BCB6FBFD7DCF2D
+:101F10002CC7F63FCC628311FE29BE8715F4CF7C17
+:101F20001BC9E3C9DF6E32B125B0A5D96F37533C69
+:101F3000784D958EA17CD1EE1B6632E8785CDBA0F3
+:101F40002BE0F8473928F10E0464447C48BC21FC9E
+:101F5000B698316EFC02AD5FAECB807EF004DCC77C
+:101F6000966B904E7A55D915F417C8755D489F4CFD
+:101F70008AFF69FAE467D4C3B7C55F9C1E9E81746B
+:101F8000AED5C35AFDDB64715562BF0BE9E1134264
+:101F9000FE4D89D7C443307E16066FC7841C0CF0F3
+:101FA0008FDF19FF23FCE31FA11C09E31F7FC6C8B5
+:101FB000E56FA39DDD36290CBFBC27E6D7ADEE3219
+:101FC000A2FE8C6F51C2CAB36CAB51C61357E0FA74
+:101FD00064FC442B8FC3C0B711FB5FDED4BA0B7B0C
+:101FE000E5C65E168DE6DB15DFC3B937CC3C6B0466
+:101FF0009F3B16308AA33AEA18C92BA8FBB893B0C6
+:1020000095F223001F4FE0B8178A639DB615921D05
+:1020100024E35686D8E0F3F89E78D9CFF547C46F0D
+:102020007A0F7AE24F625DB0FF67B05FFC02161470
+:102030009F917199F83AAF62CC4775C4C8DFDA3B1B
+:10204000CEB304F33FBA8633E753508F29B515A2B8
+:102050003CB5CF72B661FC66F929EE9F5F3E8FF901
+:10206000962A0179059E2CCA0342BC05FA07760A16
+:10207000F9B653AC1BF4E45FE3F9BA5AE203F4A4F3
+:10208000C4876E75AB4A78ED0AAFA702F0DAFE435B
+:1020900078FD19F9F29D8BE4CB0F2F856EFE7191BF
+:1020A00074F34B8C6F0C093BDF678857ED7C4067FE
+:1020B0004783F8BE073ADB7889F1D2F9E69FA8A7F3
+:1020C00042E1FA5D7C42285C5716EBFA91BC6651FE
+:1020D000CE707AD59660FE4FE791D812865C7A1E54
+:1020E000C9FA7B3B8D8867190791EBD5E68FC8F657
+:1020F0009A16250FCF9F85BBCFD339E074DBBFE89D
+:102100001C109A07C2E79D0FE48DFC39561DD0DCE8
+:102110000AFC77A6C948277595397E370AFDF77BF3
+:102120000DCCE7A0FE11D8FF0AC6FB5FD1B4BC03FB
+:10213000FD575730BD579C4795EFB91D15837C7CE3
+:10214000C55E95F2BFD866FEBC8E452C41FF744C2F
+:10215000818E3902E019EB8A628E0078C68DB7074E
+:10216000D5E53979AE9837C1DD2BE8FDA41BB382E4
+:10217000FAA778AE087A9E3A2B37A89E5E3722A837
+:102180007FEF85A383EA99DE6B83FA67374C0EAA4B
+:10219000E734DE1CD4FF18AB7B7C14ECB33FFA5B56
+:1021A000003FCCEBEAB80CD63B43ACB7EF9AF2A0B9
+:1021B000F781FD5A311E385390C917CF8DDFAB0020
+:1021C0001C6708FFCEE5BE3941E3CF55AB887E677B
+:1021D000361A8E04FA69F4AC6B4F2AC0B9C6A73818
+:1021E0005BA15EB926F8F9EC1D1BE8BDD9BEE0F68F
+:1021F000B99B83EB83DE9CD29FE701B929BF72466E
+:1022000042B0DF8785D08999E4F499B5DCFFA57ADF
+:10221000FB6AE824185FEC27D28D43D08D293998CA
+:102220006E221DC17453F9FAD6A108072DFCA3FB39
+:1022300069E8C90BFF7E00FE1667307D69E14EFB41
+:10224000837556EC50D8EF9550B8CF6A7978792AD3
+:102250000B853B633E23D71FC1ED8F68E0FD81D91D
+:10226000F318CA89B33B16A8188763E3793CFFECDF
+:102270008EAF07ED7384892FE584C497D62504F8C3
+:102280007F647CE934C619AF64171167DCFD4F84A5
+:1022900007C8008F01F3110B9C11DD71C5487F3C0D
+:1022A000492B3F6509FAE3B904D22BFE786C3DBC9B
+:1022B0003D34E60337AE53C6E564BE8ECC2B0A939D
+:1022C0009FFC978404CC0FB447E3F9754BFB7C3A31
+:1022D00077C9BC2226F202C3D8FFA44F9AF1D714C3
+:1022E000B20B762670BDFE0A8ED76D1788BC2FA95B
+:1022F000D77B1A47C6DF7A2A955D2AC513BB942877
+:10230000E75361F4CA47093F51BF85E68F7F14A8A0
+:10231000476AEE38BB07F50BC0FD636CB758406FDA
+:102320002B7EBDFDBB682BD16BD7EBAAAF2F349CA6
+:102330008970C4D8018E2D22DFAF45E4FBC9F5D6E4
+:1023400045A4BAF479D81E9CFF27E38ADAFD8DC232
+:10235000FE71FE3ABC1764972CCFE576DB690187E6
+:102360000D166E271813B99D50AB391FD53670FB6B
+:102370000CA4D7AC9680718C8916EADFDF5C684CC0
+:10238000C47184DF6579A64276C57245217BE47706
+:10239000B6D1F4FCCF09858644E8FF6F31AF1160F8
+:1023A000886563165F8F439317FE92E8FF52C268F9
+:1023B0002A8D8936E17FB65D81F4916A7619A95D2F
+:1023C0000D1FA78A4EE4FB1A29F264B47180714292
+:1023D0006EA2DFDFC4EDD2E2B18941FEFEF78CF1DF
+:1023E000C2DFAFD0EB2E9453BF1478EFC9FFEFEAF2
+:1023F000676B47F1ADF5FFAF8CE4FE7F191F08F165
+:10240000FF3BC785F5FF231EA2ED7EFEE993D82D85
+:102410009FD2503EED307AEAF1FCD5B51DEC7868DC
+:10242000EEE7EBA4B8C0C07DD94E3C672DCF64BBAE
+:102430002C486F4B18433B7F47A76E69243C5FE9EC
+:1024400065367C3E7C2D3FBF55AE7138719B520E78
+:102450005C9DC8FD8706381F5B72F1BDC96D1827EA
+:10246000583995D9510D35B2C6222BDA456B59D85A
+:10247000F3E368414F130A7751FE764217CFB70F47
+:10248000EDA793767E21E2735897E72C8FCF717971
+:10249000422211CFA9ED3A5FB8737DB2ADE86AA4CC
+:1024A000AF81BEF0E78891C24FE632BB27E2F80366
+:1024B000B7F17CD84A297F67E8981EF03E45E07561
+:1024C000CA5A9ED7C1CE7FFFBD2AED4546E333945D
+:1024D0002B95532D3EF41355B6647A695D6EC599FC
+:1024E00083F2A2E56D37D62BF3F36DE89770FD9D6F
+:1024F0002947FB91A9C9B8FCD2B3A3529E901E8F65
+:10250000A738D464416F23F1B09C40727E6534C01B
+:10251000BB72ED925D98D7F3FE1F19C59B0EA85DA7
+:102520004371B05F017016E662A967A5E4B748A6DB
+:1025300071A68A71BCFF827923FCF3FEAAE575DAE5
+:10254000CF0103F346001D9DDE798303EDEEE5091F
+:1025500011E4CF9371DA83AAE73E5242FAAE1A5CD5
+:10256000DA4D2DD136F4839CDEF9613AC64D3EB981
+:10257000E7AC05EDD87FE8BB2C982F7C7CD1BB164F
+:1025800017C0F193452AE59DDD2AF48684FB7D89F9
+:102590001CEE1F27BA1721DC6F5BFCDDD0C03C2A84
+:1025A000B63081E879B64FA5905CB79CDD1C8D16DE
+:1025B0004A77BDBA392EA82EF540B589D5853BBFDF
+:1025C000BC24E86976D30663AA03E7F7AC42FA387D
+:1025D000AEE774747C9BC5E7CDF4AFA7BC69B011BE
+:1025E000ED837FB498582BEA337D8781E749BB8A16
+:1025F00015A00B8FC0BF769D7B5E8EA6F1663EC692
+:10260000E54719CCB510E0EB69994D7241BB8F9944
+:102610009F38C625015C67AE5018FAE3B0FF22C0B0
+:102620009F67E1FD5FA1FDA5DD679937580E48F969
+:102630005529F03CBD21F87965CB6F699C19CC43D5
+:1026400079206027699E5F730CF50AD84741ED67D2
+:10265000F6669B518F6F4914F1EDA16CD8F7F0FE2F
+:10266000AE88EC184F187E92E5C9C53622D6CF1732
+:102670004750797C31A3725122A7E3AA96B7EF4461
+:102680007BA966C716238E73C9F1819613D69B99D1
+:102690005FEF96E83DAF211ED92C25284E50B3E1BF
+:1026A000AC91EC32019F52D15E8AF0003CDCC21C3E
+:1026B000ABF13C505A65F0C7E9E0FF5B72BFC36005
+:1026C000BF80DAD1913917B55FB94FB96FF9BC5AEC
+:1026D000057A0CF3BEE48345421FCDD83869792FC3
+:1026E0000051FDCE63199DFCBC49F67891C06B5139
+:1026F000C4FD648F1785D8E3EC3DDCB7A4C74AE678
+:10270000243DA2A53B4907CC6CA0F72384BDDE4D38
+:102710006F2D0F125C243DCC5C5D68E4E69BC7C85E
+:10272000ED4A6FB2F0D726A3BF16E830C83E06BA0E
+:102730000BAA6BEDF12F0D9D19281FB476B8CCE7CD
+:10274000D4C2E76022CF5F9AE1708DB30DC0738071
+:102750007B39F985F146CA10E4DBC63D7723DF6E8D
+:10276000E47CF30F410FB3923C1149F0DCB3F49ACF
+:102770001AC47FE7125306F2B367698A1A0FFD3D48
+:10278000AB1492C3A397A61811CED3970D1E877CC6
+:102790009DCB5C34FEB43816D66E189CC4E54779E0
+:1027A0009D811963082946F40B9F6A50C82F8C9AA3
+:1027B0006422E06B96C057F58AB7ADA4AF1CF06FEA
+:1027C000285E1FE03FB3EA2A091F70EE08CBC7520C
+:1027D000AF54B166630A8C3B67651BD1319C47825D
+:1027E000FAD7B29584AFEA664D7BDDD5843FD8B980
+:1027F00011CF89B53B829FF74F127682933991BEF4
+:102800003D775A2230AF71B4804FD94AC586726B7A
+:10281000FAB2B6841BA03E7DAFEA84ED74C387850F
+:10282000FA23281FEDCCDE1CF2579C713892B09F22
+:10283000C7CAED5245EF1986EDD3E23CC3D0CFD8DD
+:10284000F59185617EDFA1732A73E411950FA2FCD7
+:102850002A1B1B3429C0BE2F33D812311EE965F361
+:1028600093C53DB88840F8D446AC247EA8457E8800
+:10287000F0F3C3348C7BA1DDF3A24279846C473042
+:10288000BD9F703426C29190B9EF33909C2E6F8A11
+:10289000A5F371F9B22223EAD5F26DB1641FC1F933
+:1028A000F4BDCB86FAF1796859DE9E6418B7BC395D
+:1028B000D3A906E331F4DC19B0CE390D8724FE8E9E
+:1028C000F480BF23E1F007780B6A2F4F127249E0C2
+:1028D0008D2D8A23BD5A3AEFD59C0858D799BA480E
+:1028E000CA93ECE97CC4668CA0FC03E9BF1ADFAB99
+:1028F000DBCF44793E67570E21FC69F136FEDFD30A
+:1029000087A1BDCBFE6E6168674DCB66B74D86F67D
+:10291000DB14CE6FD3EAAF198F76C4DD495C9EBD60
+:102920000572D0D597B1B7410EBA400EBE0BF21169
+:10293000EBEF2F4EA6FA878B1D547EB4B81F954738
+:1029400084BF5FF21D1002D1ED92242E179724C987
+:10295000F8FA82643469C6FFFBDD213A1BDE676C3E
+:102960009B30369DB1EB5CC1FAF7C6A9C1FAB5D36D
+:10297000601B978CE7DB150AD9A3E5EE9141FDE1D9
+:10298000DC64C47B2BAC5F9EBF9DF486C33819E822
+:10299000F1A6E2B8A0FED737A406D59F4872D0FAB8
+:1029A000268DCF0E6ABFB9B47F50BDEC9C9131A487
+:1029B000774701F1CF0291670407778E171BEFFB72
+:1029C00075DDB0A4BB60BD5FEF33D0732D3E245ED8
+:1029D00067AC519907C69BBE06E41F2CF148E3740F
+:1029E000E2AF2F0E58E85CB2BC296F7F01D40F35DF
+:1029F00019280FE8D0B2B85568AF1D6A4AB032281E
+:102A00003DCB5561D7D88C2C40DE152D5B42F9A605
+:102A1000653E9393EC9776EF93B2EEC0F32A2E12B5
+:102A2000F9E43DD5D7AA10FE5C04DF6722E95EE138
+:102A300071B027F12AE1F44EBEAEE30A5B86F513CE
+:102A4000911FF7B90BD6716A6263850EFD15EABE58
+:102A500004929FCFAB0CE9B6749E81F20C66BFAFB7
+:102A60006EC03A53725339BE55CAA366CF98687C7C
+:102A7000D6051402FD163C6D7AEA01AEFF787DFBA7
+:102A800040DF03823E918E8EC732572C2D56A1F522
+:102A90007EFE76C2067CEE87A76F10EE7BBDC1FD81
+:102AA0006612E0EFF30ADF20926F8B1288AFB470EA
+:102AB0003F62E4F2CB8B7CA0F8E5A69FCF96927E96
+:102AC000986E70263A496EE5A7A0DC3AB2D24076FD
+:102AD00030D3BBAC93488F3E4F742CE739A2778C30
+:102AE000C3F51D69C864985F51BE52A5F30AD21F91
+:102AF000EFEFE3E7D487550FD824CCDBA07858520A
+:102B000028DDDC3E6F18E55D6AED6D597E09BCEA93
+:102B100009B04BE6ECE479812CBF533F7560E03E91
+:102B200096F1F93C0541F94A5559AF1D34EBC82ED1
+:102B30008CC173C289F754A2B313598D4393019F7B
+:102B40002775BB86DE05F52F267A8FEAA13E22DAAD
+:102B5000F32F84EB5CDDCA0C250BF3FA0FAF1A09D7
+:102B6000EF7DFEACC1496C2EECFC39CFCCEEFD43C1
+:102B7000F615D81BBDB8DDE14AC1FBCF731DCD1AD8
+:102B80007B80C3C78149200017DB6A056D377678E3
+:102B900088E5013C574FD7314FE079E0B0C8E3B149
+:102BA00024F373A8B41BA6247339335DC7E99BBD16
+:102BB000AC707A03FB2A500F48B93D17F3AA55BFF2
+:102BC0001E9072BB8A3552FE8A2399DB2FB3151FE4
+:102BD000D9DD35988902FD2B6C3C6856B5D9E4F3F4
+:102BE00065D298B640FB607A329727738CCF3E8EC1
+:102BF000E45BC93AF83E35FD3E37F82A3A3243F5F0
+:102C00004F856DC3323B8D6F70A29FB752F06B75CD
+:102C1000A3E26B253B85EB51E9579D29F4A8563F6C
+:102C200085E8258D3E9AA9D1BBAC3158CFC27AE94F
+:102C3000DEB25CAF769DEE680BC1610EAC0BF56F3A
+:102C400085C7B7A784D6AD3801A321EBA964EE31BF
+:102C5000B1B80F78DEEA085D9F765F21EB15FBD4F3
+:102C6000AEBBC2F9552BE6BB543529042FED3E24EB
+:102C70003EB4769CC44B8597C3B7A245217C7ED6D3
+:102C80006D1F32F26F4BBA61CDF02FE07D4947B036
+:102C9000AF12946F95AB411E6786D2D31CD66C459C
+:102CA000BAA961ADCB5390DF5A9BAF1F8E7E86B51C
+:102CB0006FD3F9A9D4DE9AA38B05507A73578EBFD0
+:102CC000CA4FE7178A27FC5CF0C3DDE9A59F1EE029
+:102CD0003573A3EA8A1C14D44FE43F7A098EB3BC3F
+:102CE0005E23FA6367093FE585D659ABE7F75F2EA8
+:102CF000B85E01CF9F7BDD0F27F76477853F17769E
+:102D0000DB5B1A3DFFB181FB5BA57CFE5AEF22FF26
+:102D10002EB40B3BACCEC6E37D1AB99E9E4F72BD5E
+:102D200042E87939CFD1355B295E3013ED8080F6EA
+:102D3000CF566FA578A5F1D99956B4CB8FAE99BE71
+:102D40000AF3528F364D27BD5FF97BA9F73DC64088
+:102D50007BA2684DD9FA7B908E3747525CB1A2DDD9
+:102D600023CE452067A19F630D97AB6C3597B39534
+:102D7000A81F07907EEC8BFDEEACF0F4457E086852
+:102D800027BD79E774CF9F77C2B877FE29DAE925A6
+:102D900050D85A7564CFDB5A513F56CFFFF020DE32
+:102DA000D3017BE0FD5F4B7B00AA45064F5B32EA17
+:102DB00021610754AB1B326C683708BDF11F807F5F
+:102DC0004478F8E712FCCB11FE01F1DB4F1B389C75
+:102DD000A76BE07F7825C7CBF2A66C2B9E2F3F6DAB
+:102DE000C826BBEBD3A61C82FF8C0700FEDC5F1F4E
+:102DF0006C773500FCF17C81F087F596B73B04FCDD
+:102E00009D1CFE0D1CEE6C252F6784C0D94BF95715
+:102E100077FED1E4443BE278642BD957C7B7A8AC1E
+:102E20003EC02E9376D137ACF149B4DF24FC67F76E
+:102E3000E91884F2A7F4E1D7AC8887D95B785031E0
+:102E400004FECC9544F1C7EEF9BBEDA86F115FDD30
+:102E500076D445E2A986B919E9C796D70EE039427A
+:102E60007171BF458DBC6FB623F8BE19E69295DA35
+:102E7000D1C5E28C88C0F5A469EFD37918C6BDBE70
+:102E8000CDF9EAD6F9C4E75D4179B925ACD580FE24
+:102E900036D6ACD03DEDEA0585D6428671B53A5AB4
+:102EA00087334509CACBAE5675644F5619457C44E5
+:102EB000E45524897E4929DC2F909C62A3F2742476
+:102EC000237D70DA62F4E17D2A385F25E3FCDE9D24
+:102ED00026C2DB415C13C05F350A3F33A842A4B76A
+:102EE0005B18A7D35BCC7B29AE07279775A81FA7D4
+:102EF0002D3439C9CE8D8FA1F8D2CD42DEDD625E90
+:102F0000EE463D31CD6C746109E37A31F9D7301A60
+:102F1000A687F90DBD8C74EFB034A2F3593C12DFD3
+:102F2000967CF88E0858EA95608EA31F187EDDF611
+:102F30007D5C285EFCF809F64BD74685F78B0C17AD
+:102F400070505C2EF23F9B60EC2858C7A814076FA6
+:102F500077D8B83F7A2DE0C9E2C7AFB69D7979FC42
+:102F6000B20AF3B1F9F758BC241F545D50BDCAC86A
+:102F70009F4F796243F1EA34C6DE618E8188B72AB9
+:102F8000942178EE2F8BF1617CEF3AF487DBB1D49A
+:102F900013BD4CD633AF8E970D663B0EC7FDE325B0
+:102FA000029EBF2A60AD3100F7D6D783FDF337B458
+:102FB000EA5AFB027CAFD3B7B6217DEA221C061B7E
+:102FC000CCE31EAFE4E239A56AE9C5ADB7E289A654
+:102FD000E2D5A3A0AEE3F9AC5DBFE6FE895B805904
+:102FE000116EB7EA59BB9ACBE900E1526B7778A929
+:102FF000DF3C85E237322E20F13F18860FC4E32DE7
+:10300000627D304E8315DF3786C7D77C812FCC8C0D
+:1030100046B8CF157C3757F25B5330BF3D827804FA
+:103020003E55D02E06B8DD22CA9EF8E2A1146E47A6
+:103030003F94C2CFEFF75CE27CCCDC95417979829A
+:103040005FAA4D7C7C39FF75A27C30C54EE3CBF581
+:1030500000BD7E8AE3E8400220BD1E69AC27FB6804
+:10306000160B88C365FAFB49BA0EAD77CB11DDF7B5
+:10307000581ABB6620E8955F443A518EDE626CCEEA
+:10308000A93387F69371E652D661A0EF03493F99C1
+:10309000D03F635533E535952AFC1EF4E9428B5742
+:1030A0000776E2C722BE7B06EC469CA73456A1FCFD
+:1030B000AF69317796205F975A8D7A2C3F16F1DFF2
+:1030C0005B59178DFF892D2BE60686DF4D5031E6C3
+:1030D000070BF8A4D805FBAD47F9C3EB2B5D69E4FA
+:1030E0008D12F54FF7615C66EA79A003AA1F2E7670
+:1030F000C1BCA75F15CFD991627C7EFA3E41CFDE7D
+:10310000E334DEE9C7E4F353FCF90AF9FC2B5E7FF4
+:10311000508E2FEA0F6B9E2FD13C7F82D75B9FF89A
+:10312000AAD88BF6EB684EDAA523149257462137BE
+:103130004A97B6129C4B75BB78399AB5EAF22FDCE8
+:10314000EF648ADB989280F7CE8F58500FFF33D50B
+:10315000654C817E9F2679FE86E59C498AD78872D8
+:10316000F73D1FE985921EF2278D42AE9FEAE5A644
+:10317000F7A51E8371DEC3F12F759CBB43C7F9E42D
+:10318000C78C734D6AC838477FCCBEFE9CCAE12409
+:10319000C791765171BA4BE985FC3A666490BF706D
+:1031A000EEBDCE18F44B31CC7703D0CF5DDA9C91D5
+:1031B00007E3CF7DEEC58C0AB49B84BEAF39A7323E
+:1031C00017C8A3DA730A955FB47D64C47BB335DB9B
+:1031D000DA8CE3A05F2D944501EBAA12EB047DA7E6
+:1031E0009F1CA0A78DBD74426E3CCCF3329E3BA1C8
+:1031F000477CCED5351FFD3DEAEF114AD8F8F2974E
+:10320000627F077BB81F61EEC5E551616F5734EEF1
+:10321000F314063960FCA2FAF0F902BF12EB28158C
+:10322000FA6FFA504B8403E03CE43D1E5FAF589BBD
+:10323000998BFE6263F2E804825B8F7ED62EEE6786
+:103240006DE17ED6527BC702FC4E99BB57EC83F8EA
+:10325000DDB209BF937C062C0BEF8E37C97ABF898C
+:103260006346713F18D6F37E9FF920F2CDDE286EBB
+:10327000CF4E1B36300AE5436766B4CE06FCAC4F32
+:103280002A73F74AC0F6ABC6617BA1C9D2A78CE00E
+:10329000CB882EF449EEFEB84EEC8FFE118FB1357F
+:1032A000E106D887E70D95EE037806457BC2C5CBCE
+:1032B0002FEFC5E5B9BB978DE0B15707EBCCF5AF64
+:1032C00043CE0F76FD820E18EFC8D294C10F38306E
+:1032D0001E53785DAF04FFFCB3923CA302E73FA20C
+:1032E000637DF06871B1EB182EF0711DC2064AF7CC
+:1032F00028A0B780F3DEE431D141F5A9C571CC1522
+:10330000E8BF9D9A1A54BFB1343BA8FFCD33FA07EA
+:103310003D9F68EAC8AF0BB0677BB697BC049F5A65
+:103320008B250AEDBA4F5ABEF9E016B40337AA4E00
+:10333000B45967EFDCF4C148E87506F01B477E49D5
+:1033400007F9D13E9779747A973E307E748A75502A
+:10335000BEA23CD75E6CDC68AEAD9DF2097FAE7854
+:10336000D1BC5EE2FC9BCB72513F9EA97B9FFC7956
+:103370003566BECF532F1EE2DF2D44BD02747F356C
+:10338000BE88F6E23910FCC0FF453B0E519CCD864D
+:10339000C14DB4F7D3E6E9F1FE642D94A85FC68170
+:1033A000DC8A01BAE9686303B761DE48A685DBE51C
+:1033B000E7A690BF7C6F14F7FBEC4D8CA5EF48CCD3
+:1033C0006DB886DA6BCE45D3F86FA91DE3282FFAC6
+:1033D0000585E2131353A72DC5FDEC8DF20EB81D24
+:1033E000E69DF8E7ABC723DC6AB6F17B0213D5771D
+:1033F000F2E74159D5780DBD3F51657B15B01F628D
+:10340000CEDD42E34E441B00EAEA50CB03A89755B9
+:10341000636B9F3FA0BC315A48DED49E8BA4F72635
+:103420001471FDFD7B214F0C9D7C5D63CF4DA2E7A8
+:10343000922E7CBDB282F2F70D091BF5F8BD214337
+:10344000A742FDAF3DD79F4AB9DF37FAFD91BE2FA6
+:103450006048F87A1CE68DBE11AFD8C82CD1C8E3FD
+:10346000B375C362581879D53DCF399E6F6C3AC792
+:10347000F38FFF3BCDF517E4C392459D7A8C17314E
+:1034800073840DE1555230D85111C067EAAE9B8C60
+:10349000881FC3EAB78DA8AF4D5016053CAF16F98B
+:1034A000585A79DD22E483FC8E9BD43F2C7906D1D7
+:1034B000E7AD3641A0828F9E167C2CDFEFA0330E45
+:1034C000E0713BF7F3B7A679DE4239D151C86E7C83
+:1034D0009EE4674706C6697EAEF5039E2314B21BC1
+:1034E0003B29AFBEA4C0A1C3F8C07BDD7A87F3F34C
+:1034F00085F6D126F6FD96CA16E2B86FFDF2971D45
+:103500002E18AFEDEEBC3CD40B72DECF7AF17B0B04
+:10351000CCD6751ECF87B52F473B90EF27E2E10C45
+:10352000E3A23B4D746E81768A77D4BE6C7A0AEF43
+:10353000BBD55AE1FC0AF317BD12D98A74DCF64AEE
+:10354000A41EF5C71DBD3D9F217C8A5EE93B06CFC9
+:103550008BAE16939E91FDE33A4AF2B687F55E482C
+:103560007E69E94CF2A7A781F34B99A0D372C17F82
+:103570001EC14767EB92880FCF2E8245633C759141
+:1035800032701BDA0B0E0B7D974EF2E5443C1F4167
+:10359000FBC4FEB1748FA1EA5C6C101F569FCB1464
+:1035A000FC1D47ED92DFCA059F98847D3143D0B55D
+:1035B000B45B243FB2744F622AEC63623DF0BD9568
+:1035C000E2FEF9C84F7EBA31DA90BE806E922B02CD
+:1035D000F8A7BEED2686768A29DE4D743303CA40ED
+:1035E0003B6566B79D621B9708EB2F5996A9C37B75
+:1035F0009BF2796AEAA5D17F44AAC82730B7E6A032
+:103600005D6BA88B74E27D9A33F13C1E347F058795
+:10361000E37C83BB08ED8CF94F28E43F43FB03E5D3
+:10362000D2D00375C640BFCA4DE706513C7DCAB92A
+:10363000CBA834267B2E4738949DBB5EE06BD08FA1
+:103640008A3F0E7171BF92C167726EC844BF9247C4
+:10365000453C1F4F67B64703E37D6B54F28FC9B8F3
+:10366000A4F43399F0DE4F803EFD46DF9841DFA39E
+:10367000D1FA9D0AB9FE3FB9D140FABFAAED9DA18A
+:103680003A78FE79A62B09F5C97A83A708F733673C
+:10369000B2EF3903D4E73EB8D53ADCE18767B3BE71
+:1036A0003507F56933C011FD5FCD2BD5F13E6EF7BF
+:1036B00044F3381AA76F49CF5A3A9F732E9BE07391
+:1036C000B6CE447AE82CD02D0BD04352EF48392F98
+:1036D000F58FA4EB6A3D975FD5E618CA23F3EB9DFF
+:1036E00049EE42A4BB7E3C1FD0AF779E5A3502F90B
+:1036F000E0743CE55D4BBD21F9E085C5C9944724E4
+:10370000F592E40329CFA57C97742FF5D6E83FFD09
+:10371000EFD6BFC3AF93D23C77A5027D5DABE7FA8E
+:10372000EB5ABD85E8676CFC243DD2CDC5CBD143B7
+:10373000428E1E0A92A3353DE88145A9527E5E1C49
+:103740001FCC117C33DEC4ED4894F381E3B5A68D24
+:103750007E08F7B13A95EBD99F6BDD3DC9FFD5A93E
+:103760009726FF97A45E9CFCFFEF54FE9D0AADBC1C
+:10377000C70F71A3BC3FBDF3721FEA83830CF40330
+:10378000EAC19668C726A10F485F44C5F87E481F66
+:1037900014F69EFEDFA9E1F5C1666CFFB1FA40D2D6
+:1037A00097E41BC927922FB47C24F962C26FE1BC55
+:1037B00088787A8BDF8FAAD67B9B280EE9881E8CAF
+:1037C000FCD96DC76D5388DF42F484E01F3FBF040E
+:1037D000EB0DC91F925F24FF540BFE9829F843F2AA
+:1037E000C56EB5F9D111980A90E6F908E588E49319
+:1037F000AAE7B5FAA147BA424F239B195FC790AE1B
+:10380000AAA10CA42B530FFC70F012F5C2BE8BA41E
+:10381000A7AFFEF3F4F4550FF474E6A7D053A81D38
+:10382000FB61BE03D673361FE46DA69FDE26FC8DBA
+:1038300071FB219B9F07F646F17DEE35A693FF674E
+:10384000C2F73CCF57DA033385BF41D2691ED80196
+:103850006943FCF8C7F3C0BC8B937B8467537C87B8
+:1038600011CF2733A10CB4037AB27F53D32E4DEE80
+:10387000458AFE17C2F380B49FDD6E1C90161EAF02
+:1038800003D37E025E2762A22AF92BB24B5CA3000F
+:103890003F0F89BAB74F09C2F1FA02F9FCB2552EAF
+:1038A0003DCA07D6FDDD75F477BCA5CA7ACEFE31D8
+:1038B000B09E098F32BF1F1D9E8F1D15D3ED1F5166
+:1038C00098BF7F715AD6FE95A4E71B45DE4AA79E96
+:1038D000C783443D1FEA96807A81A6BE96F7B7EA71
+:1038E0003B59603E09D28D92CBF1EC0EB01F60FACD
+:1038F000F6B3A82F6C0A43FF466DFC8657CFA25C37
+:10390000DBA1506CAA1B0EDE810407FA3E38D507F6
+:10391000EF775DC6D8CDDB78FDF6B54356792F132A
+:10392000E306DC1B32342B2ECA4728507C5999A160
+:10393000F0BE3D4DCA13B91E46F71402DE6798AFBC
+:103940007729EF77E74D67D1FBADA64B98FF8651FE
+:10395000E1EF6FAC10FDC6E4C7847DFE709ACAE14A
+:103960002FFC06343F344D690E7F9FFF09C12F1D88
+:10397000183F21784E5A85FEED0EA384B77B15C201
+:103980007B2C63417E34989FEA1BD7BA4B1AF47C98
+:10399000BB2E0DBC7E68BF77A505DB03F49B065FDD
+:1039A000A61F80F7DD61DE7704BFDFFA43F85A1205
+:1039B000F2BEA0DB59928E5D41F41EA377137DC643
+:1039C000C42B36B4A36BDC912BF1BCE0E7CFD21251
+:1039D000829B8C1384F0DFB4923103C84E12CF6FF8
+:1039E0005B85FCEBD675F7E7FC28E91AAF36015C7E
+:1039F000C9F507EFBF9C76EB2AF44F025DD073AA9E
+:103A0000EB03D6ADE5C7664D7D94867F05FF91FC3F
+:103A1000407D0070CA41F9167FC8E808A0934F04A2
+:103A20009C4E897CF28ED1DC9EECC8E2E577693C45
+:103A30002EF599A0CB53929EA202E09016443FF43B
+:103A4000F72102F64D70BA295EF2F3BD25C5C0BF5D
+:103A50001D76FEFC7FD6FE669537CD5FD78EF7CFFD
+:103A6000B5F796205CBAC7F72EDA8F76C44D026E92
+:103A7000DFADBD67BF7780C073A2FFBBAB401FF453
+:103A80003D9E6AA40F25943E5E0DA52FAFE67DFAFC
+:103A90003B043DBDFFB75079E0D2BCCFF07B10179F
+:103AA000FFBEC05BB106AFE335781DA3A997CABAC4
+:103AB0002F48FE4AB95CBEE3E1FB12E3D1AFA9D0C7
+:103AC00075243F3D3F48F43CD726E97715C1D54FD3
+:103AD000CF0FED47FA9DDC2CE9B591F4CF2494C3C8
+:103AE00023FCF5292887A8FE7009C6C5FCFAEA91CF
+:103AF0005528B76F6890FD1FA5FE372F93E3ADA63D
+:103B0000E7128F8C3D46FAEEA67CA9AF1E27B93F7F
+:103B1000A785BFEF4CFFDDFE1FE487460D5CD66A2C
+:103B2000EA5E4DFFD517D06FCB34EF2FD23C5FA9A3
+:103B3000A9AFD1D41B82DF2F9BA1101F9615F0389F
+:103B4000A5962FB5F4E14AEFB673BAF5B96226FB34
+:103B50002E88AF26D4F3FAB5E91B4B1ACC01F575C4
+:103B60009B4A385FC06C01F79F41E67A55A0074336
+:103B70000F72B320BD07B9D94FABEFF9F37FE0AFB8
+:103B80002914370AB24B76ABC1F53655ACDBBB75A1
+:103B9000FF820181F1D5E74BF05CDD631CC7DB5C84
+:103BA0003226D02E62CD25AE807DCAFEE3BEFB5EFE
+:103BB000C5F93CEBFE5CB2D18C714F11DFB4F3124E
+:103BC000F4A58AFABA56F86FC6611E2FC693A25A98
+:103BD00073E60F08D8276BEE83FB6CBB5BE5DFB7A2
+:103BE000AB07FC009CCA9883F250A73317E5A5B633
+:103BF000C5C42CFC2F786FF7DDEA42D4D30717C673
+:103C0000515ED32BE9FC7CB13BA677E24CA8B745CB
+:103C1000DF46F2B6EDFEB154EE525DCBBB6C8C2D9F
+:103C20005EF74A89F9727C1E4370BA3BFDA5922566
+:103C300040EFF7A63BE87D8FDD96B803EDED070C6E
+:103C40001437040E7892E8E741D3603C6F972DE972
+:103C50004F71B1F2C7268DC37BA4E5F719285ED258
+:103C6000A9B3919FC8F3C058CA939AB14C94DEABE4
+:103C7000A97CE5DF7FACC77BA65DEB14FA4ECD5582
+:103C80005F37FF6D10D42B1BB2E97EC6CBE774946F
+:103C900017FEE99ABE3ECC533E1C5947F9A5D09F6A
+:103CA000EEBB569E77EC2FC9C7FEAA0D53388E4245
+:103CB0003BDACF4757A84FE13DCE32AB250AF3BBE5
+:103CC0008F7EC7C8AF73F43E137DEFE653B3E7D6DC
+:103CD00035F1748F092D7D765471581580C3DAF44F
+:103CE000FD25C929D86E12F8DC6F2D033E2FD37540
+:103CF000D30FE9938A585E5FBBEECD924DB08FA390
+:103D00004FF4A57CB1840CD7BA7480D7E10CD7935B
+:103D1000548AFBD9AFFC9BC7255F3A599E88F4B5FE
+:103D200059D0F5CBE7CA1303FF6E41C5293DD1C178
+:103D30002B46C702FAEE6954BA82E76CA08338F4C6
+:103D40009BCF10E716A0E7855BC3D8574BD3B93D8F
+:103D5000D6F6DB84518E20BAFE98E4299D37A0FE6A
+:103D600062FA47A4E78E9816622E75773E24DB1D13
+:103D70004970323445FA2233D17FEA1AE7A2F34F71
+:103D8000739FC996003E14FD3FF1F2FCDF4FA03F48
+:103D90009EFB3EF1FE3F4B603C43F6AFB45ABC681D
+:103DA0005C1CB358F4888F83FAC547313FAD629DE0
+:103DB00081F440C5BA84455D287F806ED0BFA6DD02
+:103DC0009729C3C0FD183DC6573F2F199316785E3B
+:103DD0003941F2BB27BE7C37FD44C9C6013DF365BE
+:103DE000A58DCBA771EBF8F7752B8758F474BF7BC3
+:103DF000DDAB9BE81EF0BCC85CBC5751B9CE44F8A3
+:103E0000EAB458BCB62BF1BE81451F0BE5A174AED8
+:103E10004FF5190EC24791CAF411B954D23D0A198F
+:103E20003F3CB1F0D1C7311DF373E6BB7E18C0EF44
+:103E30008C8BD3E9996D2AF91FB5F1C4EAD7B71A6B
+:103E40000BD98F8827F61047AC629DE2BBE2E1E315
+:103E500089DA38E2BFD2C5BDB3EE38A281BE875140
+:103E600029E288456B155A7FE542FEBD92A238EEE5
+:103E70003F3EB218E8A02FEDDF6BCBC53C69AE7FAB
+:103E80002A99E28B805FAF5E3B8FFC9975E91C5EDF
+:103E900065E23BB087239D1978DEAF58174970AEB5
+:103EA0007C72F6074FE4E37DC089F181E76B9BA04C
+:103EB0000F189FE13D6839CEB125F7D077678BD6D3
+:103EC000C33919F3B463D973376522DE523230DE59
+:103ED00029FB552EBDBB0FEF07E76CD877D90A95A4
+:103EE0007F0F6BBB89F421F07C320BB82F3E63D976
+:103EF000EB4623D7672C79A8B0B31DFEFB6C9FC29D
+:103F000073FC0441ADB8B726E127EF5B95E9F8F7FC
+:103F1000364B750ADDC3028946F7977E91C1FDA332
+:103F20007919DCCE2DCB70D23D9EEA5526E7D24CD6
+:103F30003E4EF7BD7538E755EB3A2A28AEF9171310
+:103F4000F9576A9745BA22AD3C1FE3F9019477AD62
+:103F500037023CAA1C5C6EFC42D063AD63D2D594A0
+:103F60009FAE6707F0EF07565BB89CAC8E05B89B19
+:103F70003901E986E2F73919E553E2B8298302E607
+:103F800057443B8CE3B0FAC7DDAB630DE8A7C1FE35
+:103F9000970F4238C65D7F23AEEF5995F81A80B46B
+:103FA000AA00EDBF67D53C3C7797ADD83D0EE5F054
+:103FB000DC2D83F146052B7BEE5DD2237305FE3BA2
+:103FC000453E5A39D4F1BB81376470B9E951B9DF44
+:103FD000E806012F4907F279F50A03F7E383BC47A6
+:103FE0000153BDE4431AB7DAD2918872B87ABB8123
+:103FF000EE87DF8CEB0638972F491F7500E8AADCA7
+:104000001043DF51ADF24E3462BDAA51A1BAFFBDDB
+:10401000840CA4D32F96BD6045FA391CD99A83FA33
+:10402000A96B5EA493EE29DAB8DFEE8B653974AF25
+:104030006986ADC382DF6599B120DB8E72FCA0ADCD
+:10404000D588CF0F3667EAB0EEB2D94661DDA5BF9D
+:1040500092EA5F887C17FA41BA52389EAB9A761B77
+:10406000F1EF2FDD2BE8E2D4B3EFF6413F50754678
+:10407000471FD42F40077D5211CECF28A49F6B9AA3
+:10408000781EBCA4831AA403E0BB39820E6AB6BDB5
+:104090007017F2430DE23F37948E809EDBA9FDF945
+:1040A0000DE3187FBF1DE944EA33A82F33A03FCEAC
+:1040B000C8EB8B05FEA17D0C6FF70EE0F975DDF9FD
+:1040C00008417CD0137ED766E8043E4C2477D78A1B
+:1040D000FD76AED86E45FC9D7A76F71E8CB7543FC0
+:1040E0000FDADA11861F043C6A71FF565A3FD9195C
+:1040F000B5B85FAB7FFFDD742FF8B096F1FDC9FD59
+:10410000D6EAC5FEE573F1FE3AB1CF2A26E0B5AD99
+:104110002FE73BC167C8C7F4DD21B13F8F3DF8BB36
+:10412000BABBC5FE9A44C96CCD56840FE217E50FA1
+:10413000D08FCB28E5097439B56503E5F74B7CC909
+:10414000F5BFEFD72B2EFC9354128F9D3D7CF7B615
+:1041500045F0C9A1FB92327600FCBED84C9F0D24DD
+:104160007AD507CC27E946CE57F4A749D7E2BE61F6
+:10417000FC561C5FCE7BD01BADC7710E32CE1F72BA
+:10418000FD922F8BEAA75D3BD88AFD4E59B2D15ED6
+:1041900011787C3FC346EFBBD06E80F75D3B14F2D5
+:1041A0005F1F12E7FD43F7BD602D1FE0A7F777C53E
+:1041B000BA259DE10FFAC9E47AF7DAB93F58BB6E28
+:1041C0002987E4BA8BEEBFE15A6C97EBC7F8512010
+:1041D0009D4A384A7A95F7FAB4744B3427F5AADA2F
+:1041E000337DD7A61DA2FC9D9076ED78C23E3A2C79
+:1041F000F2CDBB9E56F97DE765C9ED41F78E1833C8
+:1042000007EA9F25F3AEB615623CB749A17B1E5263
+:10421000AFC0CF4A7D803E92F6C1F0DE3C7FA5362E
+:10422000DE7502F15975BC631C7E9244DAA5577D98
+:10423000DDAAC6A0FF6A1BCF8393745375B29DF8A5
+:10424000A15ADC932A5BF1EEC46148F74F1B28CEDC
+:104250005376DF5823DAFBB3374D1F8AE0C07B1259
+:1042600028DF4F6C1C9247E061B6C4EBF1BEC4C6B8
+:1042700047AFC7BF5F3A63874ADFA1C171908FCB59
+:10428000EEC8237FEBE1C8CE8923D0AEFFB56A43E9
+:10429000BB7EE4A6218BB0FF484BEF58FA78D0C61E
+:1042A00038AABBF431A427A41D2CF303EBC5BD90A1
+:1042B000ECDE9CAF7A75978AC80BACEF83F1F9AE50
+:1042C0000D91F4DDA852A3A3B915E7DB9944E78E5D
+:1042D0005A382625DBE99E2BD969B38C2C222597E9
+:1042E000DA233045F97543C71DA84F5EBFC33218A6
+:1042F000BF8BCBD4F343CBB97DCDE39071C1DF61EC
+:1043000092EBC8EACDE9573B9E7C7F2F9E2BEC7445
+:104310009F91DE3FB1ECE9EB511F9ED89C63C77DB6
+:104320001FDB1949F70B8E1982BFE778A9F7C2B4D2
+:10433000F7A9E43DD7FCDEC1F69CA4FB0BDECBB9AC
+:10434000ECD2F2984E2E66744FFC5C06E3FEE4E875
+:10435000EFB6627E6145A3C986F7648E20FD637C5B
+:104360006BBB4ADF01A2BBDF80AF23DBF3E83E700B
+:10437000C5C7BC5ED1ACF8F0FE72FBC3F753FEC2FA
+:104380004CB037F16A79B73DBDFAE1EB910DCE380B
+:104390003DCBF13B006736F37C8B90EF3ABCBE75AA
+:1043A0004F8AE3FFBFFD2CFD13D37B07DF4793F05C
+:1043B00096E7AA57802E0A72FDF0FB72F12CB29F8D
+:1043C0004F2EF650795A39B46A24D2B32586EE15A9
+:1043D000BCB4E35115BF7353BD6DF0793C1F8F30F2
+:1043E000C7D0F79FBE5CBC90829A2717D7893F8AB7
+:1043F000B654F8157C545EB5AD8DDEFB72475E0B8E
+:10440000DEEB7DD91CC3C59AAB20E83B9912BF3DBA
+:10441000DD5796FBFAFCD71CCF72DD9F6F9E6EC5F1
+:104420007DB5FD21AE6538E2373AC6867660A5C80F
+:104430002F39BA86DBD9C72362FEAB18F07C7CED3E
+:104440009444FC0ED1CCB6A9D7637BC54EC586E794
+:1044500003E7CE49563CCF7DA6EFB4E23DAACFD6C6
+:10446000C8FB573EFABB7B23C6B329D87F44AB9E1B
+:10447000393229844CF432FCA49EEECB7E01EDE46B
+:104480003F391F45FE13F889C37C92992F72BF4BA9
+:10449000F7F9579CFF468A7DB7F7B6CBF806B517F4
+:1044A00015F0F6636BB796D0DF4FDE68B0E1BABFA8
+:1044B000DC68A0F1E7C0B94D07EB3DBE999F83B022
+:1044C0008EE7E8139BF979674E333FEF54CF33B84B
+:1044D000F8FDD260BA2C0AE847DF2DEBE1BB23736D
+:1044E0005C7C7F73407FE27E2F44BFB1AC99EE9F2E
+:1044F0005D6A3EA9967EFFAA9117DD74DB13BD08A5
+:10450000B822FF23DD4ABA98B386C7F5EDCD830BF9
+:1045100091FE249D68BF03586F64FC3BB2BA28FA31
+:10452000EEF724B3C380FA624A7CE718044F5F07B2
+:1045300097AF6A91CE85F7E458BD29EC77C4DE15B4
+:10454000F2781ABC4BF7BB7ADBF8F7CFC47D315950
+:1045500082BE4A477D3E29DAFE8D03BA74AEFFF271
+:104560003A3DD0F5A491F63BB29D80D7F55FF37A42
+:104570009E7D7B16D43FEF7DF63A3DEC6FD295F6EB
+:104580002106A82F59F2CD7563E0B9C9E13AD83BAD
+:10459000609E139B92D2717FD07E08DBA7277A8E14
+:1045A00060592BEE8F9D56BA062DCCF4F77F7BA772
+:1045B000E5E04B0E7FBDD3C0E8BB3BA77BCBF587C7
+:1045C0002F9D0ED7A9DE09A1EDE58CDD47F97C5EB4
+:1045D0007E6F077EDC118978AF8AD35DB9BCC7D303
+:1045E000A0B9C7E3E4F7D5E4FD2A797FEA72FFFDBD
+:1045F000B3B59772FFECFF0069F3B24F0080000083
+:10460000000000001F8B08000000000000FFE57D97
+:104610000B74545596E8B955B73E492A4925845438
+:1046200025A984AA7C2B90C0257C0C3148E5030485
+:104630008858286AD4A005A2808214011D74F455FC
+:1046400061307C9AE98E9F1722462D10957178DD96
+:10465000D1B16D868F532032FC9A0EB463EB8CD3AC
+:104660001DD0D168631B3138F40C366FEF7DCE4D11
+:10467000EA562A80BEE77B6FAD975EF6619F73EEC8
+:10468000F9ECB3FF67DF5B5F192CEBA564C6240F61
+:1046900063AB53A1745A596319947BFFE9CFD26875
+:1046A000C69A83AC3B2E8FC15FA3F5D35150CF7C0C
+:1046B000BA4B502E4B481ACDC660991362D06F99F1
+:1046C00089B1AE12E8263B6DCCC2D81209FE9D011D
+:1046D000FFF9CA194B676C9515FEED44B84287F097
+:1046E0008366467F9F05983FDFC0D81F4F742539EA
+:1046F000F58C9D9D1D2E0CBB18FB65BCCFE69C0068
+:10470000ED1DCD8EA634C6BE7CC3A4D443FF9ED07F
+:10471000DF27F960FCA57AE6EF84926D1FCED824DE
+:10472000282FEAC353A0DF6157F1B68DF0BCCBA9A7
+:10473000630C9E3FEB0AE7FCF578C6822E93F232BB
+:10474000A37E773280EB1E9F3E1CFB9D7D7D5DFE30
+:104750003DB06E93CC5812EC7B068C590E7830002D
+:10476000AC2FC30742340EB40793A0BEC5F5740E38
+:10477000237C302F9BC8D80D8CEFEB0639BC1FF182
+:10478000C5946419F7379B6F0FDB83328CA33333E7
+:1047900003AEBB9875583F4D0098B18E4BC3607FF8
+:1047A00066C063329680C724C6A6EAA113ACAFE9FF
+:1047B00097FA9009D6D784781470D085237A2CD7AD
+:1047C000C3F88BC5BCCB8EBC6BC4C15810FE07EBC5
+:1047D0005922E65DDC71773D9ECB9290E14CB7C0EB
+:1047E000F525FA7F0F9DC772D1EFFEF2AD469CE230
+:1047F000FE1DDA7ECBD9A6AFF5F0FC52D66DC4FD16
+:104800002EEB8C6AEFA8F90CD7BB7C97B6BEDE996D
+:10481000988674C2C6B2B197F4544DE7BD48F49976
+:10482000AA6F74CAB89FE166C50413373D9F47F469
+:10483000C2DE0CB0C87EAC6318D14F8B4B4FE7B1D2
+:104840006497C49CE318BB7E5716734253FDAE6158
+:1048500054265DC8A0FACF5F3936DE5732705ED776
+:10486000BF6AABC6F55DFF6A1195EA3A9A041D4E20
+:10487000D5977486611DE72CB00E809B8EC0628137
+:104880007E9A6ED68718E19999B1BF572CC76B599C
+:10489000DFA54F42580E8AFD4A97243A84643C1F94
+:1048A000EF613D437A621E03B53B9979CDA55CA0CB
+:1048B0001BBB8E3963E0DF24CE2FCE19CF9CEE8157
+:1048C000763958FCB34A588761AE4109417B735C25
+:1048D000D236E43316F474E5C3730DE2B9AE384E44
+:1048E0003709EE54CDF32A1DDC2AFAAD4B9A76181F
+:1048F000E9B2C1B388E82151C9D4ACC7A45F6A400A
+:10490000FAB9D567F8A43B621CA25F58C70D5E29AF
+:1049100084FC787383B6DD50F975AD4425D4478E99
+:10492000E7D5F6FB29D203D03B107E71243D0C9CC9
+:1049300083C5A3C373F02412BDCBCCB9B912E05B1D
+:104940000E1B18EEDF14CFF7790E319786FD800F1E
+:1049500060E2758817A84F2ED7E237C5A3C5E7B028
+:104960003A2D7E867BB5FBB735E46ADA337C233596
+:10497000ED598BCB3470B6BF42D37FC4EA6A0DECDD
+:104980000ACED4F4CF5B7FA3062E68BD5DD3BFA84B
+:104990007D81A6BD38749FA67DD48E260D5CDAF984
+:1049A00088A6FF985D8F6BDAC786376ADAC71D7EE7
+:1049B0004A034FE8DAA2E97FCD07DB34ED93BA5F13
+:1049C000D3B45FDBF386069EDCBB5BD37FCA850373
+:1049D0001AB88A1DD3F4AF31FF56034FB5FEABA60C
+:1049E000FF74FBC79AF619CE3F6ADA67B9BFD1D216
+:1049F0006B3C9793D72BFFA579EE5993EFDF505F70
+:104A0000344B95DD4186F4EB243EBA354DA7840145
+:104A1000FE832A97041D9E1C612539C1F2598EB769
+:104A200014E9B0328C7C7C6E9744F2E0AB28BD2850
+:104A3000FFD1EB91A09DFD4A525E7622DD415DC41F
+:104A4000FC291E339323D639ACCEAA81877BED9AFD
+:104A5000FEB606A7A63DC3E7D6B4672D563470B69A
+:104A6000BF5CD37FC46A8F067605EB34FDF3D67B3B
+:104A70003570416B83A67F51BB4FD35E1C5AAC6926
+:104A80001FB5C3AF814B3B576BFA8FD915D4B48F89
+:104A90000DAFD7B48F3BDCAA812774B56BFA5FF3F7
+:104AA0004148D33EA97B87A6FDDA9E4E0D3CB977DF
+:104AB00097A6FF940B610D5CC58E68FAD7984F6A74
+:104AC000E0A9D60F35FDA7DB4F6BDA67383FD7B4C7
+:104AD000AB76D02CF7D7DA7A61175DAFFC59F37C4F
+:104AE000B0DAC3903E826F484AB313D6EB02E13F7F
+:104AF0009CE47C779C1EED282F18148C0129AD4175
+:104B0000FD920C420CE90A488C35A6E22840AC2004
+:104B1000B74955C1F3C9684F0090AA73B9FCA01FEB
+:104B200013D85AEBA766B21B1C9740DF5DC2BF29A2
+:104B3000834B94A09FAAEB85F966A14E023A6F724F
+:104B4000F93C2E58CF7D9DAF4FCB626827045B7038
+:104B50001DA00793BB416F9E886377794B068F3703
+:104B6000C30C788998EF485CABA3CC32F4FC33CC0F
+:104B700067A97FFFB8063EAE04FB6B8A18FFA7A0AB
+:104B8000EE65B0FB5A03C037058C3D15B012FC4CE6
+:104B9000C04E705BC049657BC04DE5968042ED1DFF
+:104BA0008172825F0878080E05EAA8DC16F052FDD3
+:104BB000F64003C1AF047C54EE082CA6F2B5809FEA
+:104BC000DA77065613FCF34090CACEC07AAA7F2348
+:104BD000D04AF09B817682DF0A84A8DC15D841E5B3
+:104BE000EE4027B5EF0DEC22F8ED4098E070E03094
+:104BF000C107025D041F0C7C40F0A140379587037C
+:104C00003D541E0DF452FBF1C0058207CE4B6B578D
+:104C10003361572E1274C0D2B83D792F3F52F685BA
+:104C20008E2D46BB7791A04343359887407786CC3D
+:104C3000C26DCD2E3C6AA01337D1C971B42FAF9687
+:104C40004ED070407A0D563337D29B5AB654E9C9CC
+:104C5000FE0CAE90422F73BB88EB6F3353F537B524
+:104C6000373E2885D09E9B0776B211F8E623619FD8
+:104C70007C14C7E5F539BFC18D765FA314AFC0665C
+:104C800001FE77B23BE02F8CA47FD75ED356B49F52
+:104C9000D4F535C2383A18E7BFEC2E5A57233B6C8F
+:104CA000C0F540BD470FFC72C6E6DBE202BABE2F7C
+:104CB0005B17342213594285DE44C68C76DFF348F5
+:104CC000E7E7FCF71CC2C1175995429CE77A537875
+:104CD000F8AD307FEF11BDB2CD39345E96B7CE005E
+:104CE000E17D99F6B73F77A01D5FF717BD0FCFE1C4
+:104CF0008421B1210474DDE99288CF3A5D3A4DD91F
+:104D000066F7FD02D7F96DA2FF4E1DA0F2DBEB5650
+:104D1000BCB212B6D4B8A22019ED55F00F0C685FE2
+:104D2000CF614E03CA879B98E75D1CEA66E623F8CD
+:104D30005616A452B6F976E1BE6E6321827D15A6A1
+:104D40009C58FB8A5ED73B38D8702C759AF290DD60
+:104D50007700C7FB36D143EB3A31697A21EE4B5DE0
+:104D60009739C349FD66B3DE17707DDFEEFBFA535A
+:104D7000296F309DFC88F4618169B03F33C2793777
+:104D800003EFE038CD0F4B21A473953E1AC14CA719
+:104D9000F11F857A29925E804ED07F4BEBCD99939F
+:104DA00048F4D24DF26F923E68047BFA842E542868
+:104DB000E9894E8C12AC73511AD049EED0F4F0C090
+:104DC0007A2823E420D0D91738DE9FFEE11A37E293
+:104DD0006DF9DB939C88B7661D9C07D073F0A89E85
+:104DE000EC042644BBFEDAD210F907B2A2CC29C5E6
+:104DF00073E37271BF9EAD7E3D86DC4DC8E5F474F1
+:104E0000C26EA80BD1B89CEFD5767D2E3F477D2E84
+:104E10003FDFA6159F2DD5C3FA4F1CF8DCE82C8D7B
+:104E2000B18FD53F79283F82AE97EF3A3DCD837E53
+:104E300017EB2EB93171A0BE50CCABD291DE98E801
+:104E4000DB6A895C573F5DC7E7225DA7005DE7111C
+:104E50005D7F8A76F96C9333F95628BB013561285A
+:104E60007D2F5AC97F5CC0142A17322F958B800C76
+:104E7000908EBDC1278D88F7FB5827D53F507E7790
+:104E80003AD2F5BD3A1FF9D94B5917D52F67BDB5A1
+:104E900078B437AF5FF3AE1D567D53EB9353914417
+:104EA0006F0CCD7F17CB39DBA54F834EE293EC5CC3
+:104EB000C047B7E47F2213E6BF7D67D51359503F43
+:104EC0005BCFCF851DE3E7A2CA91E87D035F14E0C5
+:104ED000F3DFA678685FFAA43A0D5F343ECE3C1249
+:104EE0008CD3BBCF14DAE68AE093F2FBFF9085F215
+:104EF0004CEEBD13CF7BF9DBA6543CEFFB18D7FB80
+:104F000092478DAFA8FA9E11BDDFCFE215ECF78571
+:104F1000A0EF2FB219D1F71712388A65037628CB84
+:104F2000F1D9CBF206F4F672DDCED18827D0EB951D
+:104F3000780EF77DDCD932D685FA2094837688E125
+:104F40003593D2ECD2E817762901858D9F213E7FDB
+:104F50008AE38E19BC2EA9FCD09FD1EE301959D00E
+:104F60005C467CCE26227F671A89BF9A11B57938B4
+:104F70008FD7E9B70C1EFF8458EFE1EFB83F1D84CF
+:104F8000FDBC2CC59A87EB2F53FCC03C2447D2199B
+:104F9000CD73472EE763753E66E976A09D7E34C1EA
+:104FA000773B9E8F1A4752FDC8C3AECFF2F17C66A5
+:104FB000576C50E5338DC7AEE372E984C11944F8EC
+:104FC00044954B0109D62F6F6F28FFA70F701D372F
+:104FD000982D618C77B04AC3D97EFF3577401FDFAB
+:104FE000A0EAE3CAA8F88E1AF7618A01D757CC3E27
+:104FF00052F141F11D554E0ED2BFB0B12EC49F8863
+:1050000097F5C779FEB93FCEA3C3798D428E32E6BC
+:10501000777B23F8D4D600AE8BC67F30B37C8DFF70
+:1050200060D5C0D97EBBA6FF88D54E4DBB2BE8D638
+:10503000B4E7AD573470416BB9A67F51BB47031736
+:1050400087EA34FD47EDF06AE0D2CE064DFF31BB72
+:105050007C9AF6B1E1C59AF67187FD1A7842D76A53
+:105060004DFF6B3E086ADA2775AFD7B45FDBD3AA72
+:105070008127F7B66BFA4FB910D2B457B1BFD5B488
+:10508000D7985FD7C02FC6F178E754EB3F689E9B57
+:105090006EDFAF815F88E7F19A19CE23DAE7C5F9B1
+:1050A000066F8B277E98E53EA969DFFFC8C8CD8DC6
+:1050B000C02FA14774E47FB6D5713DC51AAA391D2A
+:1050C000C4F1BED72B1F6AE6CBD1F7BA908E9D7A7A
+:1050D0006B26F2757EF99C034076ACD0B3A21AC55C
+:1050E0009DBBEEC903588EF4BE5E8D6C53D270F238
+:1050F0000096A37D5F570319336571CA3B5896F933
+:10510000C7D6D87089ABE7BC83E5C4E08A1A94B3EC
+:1051100060267EB108D67D3E38926D84752565AADD
+:10512000715E0FD1EDAA0C1DF1F9AADB2C14374BDF
+:10513000BFD622A33EDF1CE81A7910ECDCF4A7D31B
+:10514000D762DC693DD8F9A122B017C0EEC7F25989
+:10515000B0EB43E01C6D04BB1FCB4D60F763FD73E8
+:1051600060F7239CFE74D97A7C6ED5C97BEA7261A4
+:10517000FC110FCA563453D739752B0EC07AEC0F79
+:105180001AAD284B8CAE67E29CB08EEC65B08E0AEF
+:10519000428B0751FDEC52301C32391C07FDEC2BC1
+:1051A000741AB81DFF45B02E588BCF973EE9DEAE7E
+:1051B00030F6F9B6B337198A619F795DB76D4D0145
+:1051C000389779E602BED3F12C60FC93798FCD0934
+:1051D000960C8697147AFF487249EE2C463EB51617
+:1051E0007D9481EBDA50FD85A2B3E23C8FCC390887
+:1051F000EB7E7E78BC58E72373AAF2AF665CCF796A
+:1052000094EF50EFEF8C2147FE53E8FF93795C2F2A
+:10521000C39F15E5938D9308B3819D940CF276F3AB
+:10522000A4D5A7D1A790AD4109E523BB08CF4F1462
+:1052300028C823784AFC441EB247795354E433E724
+:10524000C178361FD84E91F1B1C55A78339CE71911
+:10525000C3C07A0C77E98232ECC1F0925751609E5C
+:105260008E79B05F80371BB5FE65918E917D719F01
+:10527000BAEE8B372968A7DD97C7F5F09680BBECAF
+:105280001303FA7F4AD9274047998BFD920FE4AB6D
+:10529000ADD1AB04A19FE1D2DFEF372261DFC53A88
+:1052A000519F63FD9A08BB27478C6BB8A427BC1994
+:1052B0009ABD4A6AC4FC06BDE4EF8C617795E6C9E5
+:1052C000FCB96646ED86771E969C305F666348BAE9
+:1052D00087C6F14B0AD4DBC2BC3EABB1535A08F0CF
+:1052E0001D794E3A07759CACC5B0FE083CD9E5A0C7
+:1052F0006485E7ED8F0625C483DDEA555822E2DA9E
+:105300004BFCBD52F0B47DF5C4B24F86E1BABD8A04
+:1053100017E79BA5F29BDFCA703D1F2BBFA942BDBB
+:10532000F61B3DC3FB8C6F9C4A725A8C7DA8A5A9C5
+:105330005BCF3C97F16792721EF1939EBCDDE22C2D
+:1053400000FE7DF1364BC3D6187476471EA7B375A1
+:1053500099AADEE2EB49D7733CA9FAEA1B2BA71FF7
+:10536000556EAD4CE1B03ACECAECF12437865A8F77
+:10537000AD3D8EF922D6BB19E6B1E2FDCC772BAC60
+:105380008837F021BC349FCCE5E9D6E7DDE4374629
+:10539000D3CF203E00D19B5C8674D91D6A06BA31FA
+:1053A000CD332A682FDAFE5B8B84722493B54A28AA
+:1053B000476DD9B58765D4E7B2AFD81BC38EBE128F
+:1053C0003FA8E7A9DA2583CFCFF9BB2AB2430D0C5A
+:1053D000E9B6C9E5B4E1F9A974DA746478AA2FE2F0
+:1053E0003CD70B3A2E67AD7AE4D30AD6496525EB54
+:1053F000A2F23AD64BA58759652CAB9942652DF39D
+:1054000052398DF9A9AC63AD54CE649D54D6B32EF8
+:105410002AC1BFA3D2CBACE487DE08760C96739981
+:1054200097CA5B989FCA2D48DF13F0FEA195E0DB79
+:10543000592795BB80FF9D45181F3153B917E43993
+:10544000966F833CC7320CF2DC69C2F8889BCA8332
+:105450000185CA4381722A0F073CD4EF68A08ECA27
+:10546000E3012F9527020D5476057CD4EF5460316B
+:1054700095EF05FC54BE1F584DE507812095FF129E
+:10548000584F659111E40AE2DBDD3D16FD9A9C8FD1
+:105490008D1E27E8A34FF384FFEBD1FDF7E2F178EF
+:1054A0008E3ABA83B1D5AE94901E6D6E9D2704E5F9
+:1054B000467793743794EB4E703BD6644B243BD9BC
+:1054C000D6BE4A72C2B8BBA46E7D029CEDDEBC0F94
+:1054D000E798414F54ED656B1314847FFFA419E8DE
+:1054E00070ABC1DFBB15DA7FF5D2BFCE3183CEAE54
+:1054F000483CF5C7D7384CED930EB2662BC007F287
+:105500004E3F9926F175A0103EFED2C773D6E4E354
+:105510003AB91C79D5058E36FA190F5BC8CF18DB5E
+:105520007E66AC0EE049AB2D65E81F47F4A3B8F5E5
+:1055300050FDA2DBD5E73A56A437231ED67D0AEEEE
+:105540008913E565F7588CCF458EABBBBAF999FE48
+:1055500032F347F6932E335E5191E754DEFF037426
+:105560001E4DDF864B1FBFAEA3F8983515F5FAF632
+:10557000142E777AB3E343DB60DDDB5305BC219F58
+:10558000F6B50E61D8D7BA8DB964C76F8FF3361DE3
+:10559000C1F6BFD129DBA0697BBC6F6331C1F914AF
+:1055A000AF5997EA77A35ECA49E0FAB1CDF1489CBA
+:1055B0003382FFFF22E4EEE6CABEAEADE84FADD7C0
+:1055C000B102786EDBFA051BDC30CE4B9BC02E029D
+:1055D0003879F2C20D05D09EBB4137512F641EAE03
+:1055E000E3A54D0B5FD928E1B823530B61DC3C21C7
+:1055F0003F7386758F5D0974DE66D4C615FAF56350
+:105600003EE7978530CC19D0BF39225EB1D5C01A9C
+:1056100022F566413E97B73545BC344CE1F13CD3A9
+:1056200088F8D0E3B0FFAA113CFE93BED64CF19FA0
+:1056300074C77F9E9C0EEDE91D3A054D5AD9B6748C
+:105640008D01FD9EDB5827F2E356893F1FCCE6769D
+:1056500032182CB97322FC1EB037CAF223E2A7F627
+:1056600086A084718CAA114B258C37A73BEE933012
+:10567000FE91DEE0937C89E827F9A9FDAE229F2BFD
+:105680001FD6676F84E735F7B1BE0C3C5798B781DA
+:10569000F20964561639DFEC228E872764203DB468
+:1056A000DFD71A695DD1F89AE5AE1E993F7CE01C00
+:1056B000A3DBBFCCE7E7B8FD719802F960128F1F3A
+:1056C0009C783993ECE5D96DF11EF4234F3C39B247
+:1056D00096E0A72A3C68FF9E78B9621A96B39F9A13
+:1056E00049FD4E48EC30C605663F75BB8CF53979EF
+:1056F000B02E1CEFB491E871F653F789E71FA9C5E6
+:10570000F6725DF0EFD09F2E6F7E2D01E3051589B7
+:105710006F64617942D7BD6A3FCC7F8395FD1AD50E
+:10572000B57743DADFD4C13FE63C996BC0788C375C
+:105730003F97CEF326E631F07C072FF9B7953BBAB9
+:10574000DE018B8E5DD7D95B83D7BA9E5DD6835839
+:1057500056871534A359ED61EF412CA775F96BD12C
+:10576000BCA9FBA0F52096DD237D5EC4FFABFFED59
+:1057700096375E0578C463ABAC6887E63FDE3D6371
+:105780001BC52F0D0CF9A16092BF558F046CF6A6B6
+:10579000A27C78F6195987FADDE46A8D43D8744FF4
+:1057A000AE0EE34CDB535A17D3BE0BE219E2F128DD
+:1057B000E821A48B82146F2AF213F0259DC39D82E9
+:1057C0003E4D297E6B0AD68B7B8EFE7EF11C5ED809
+:1057D000DFAF354EA27952A5A0C4CD08B423EC4268
+:1057E0009FB7337F06E2C396E8DF8AF1AD822ACE07
+:1057F000FF2C91D305766F99488F50103EBDD53F51
+:105800000BCFC1E6EBCF1BE074076AB0DF3EC925C2
+:1058100098EE7F364B1C063943EBC23F8CE7A45B06
+:10582000D2C9CE51D76F6B80F122EC0EDCC78D96BA
+:1058300081E754BADB20F6F584280BE6F3F1D4F5C2
+:105840006ECCE77A1DD6EDD4E17AF4623DB00F5DFF
+:10585000C47A22FAD1FEFAD7CD143BD205637E89F1
+:1058600097CC2947EE7FA1CE13371AD7FFD65F61B9
+:105870005C2909E508ACF367FB2799914FA3F7F181
+:1058800042BE88FB80BD8CFEC34C1FE7DFE646BFEF
+:1058900084FE940D61DCBF43F6605CD46669920CB3
+:1058A00011FBB539B89E9ED9E8DF8F7265667982A3
+:1058B00082F43D8B75AEB572FE3E980FEB2B62FD08
+:1058C0007F163671C04E7CFE99F74EE2913A5867CA
+:1058D0005531EACFC7EEA5BC89CD8FCC3C8CEBCF40
+:1058E000743FB93F1506F47E2DCE7D3E8F6F6577F0
+:1058F000C89ABC872CBFACC98BC858AC6D077AD08E
+:10590000C02A5DD9A5D529A86F7409253367A09D44
+:1059100092A423F90E724A9A1BD31E8DA22B817F6B
+:10592000F57CDECDCFA773B359F839B05EC57C7373
+:10593000A2D8AC7A4E306F33B07932D07D73AD3EA1
+:1059400024A11F8FFDF132B2970DF7260E3EA7ADB1
+:1059500006E7CC1928A71FD45929AF2A0AAFA06798
+:10596000FE99FC9407D3A81DEA6533C53D23D6AB49
+:105970008F056BCFE34AFD3B5878CE0CD7E0FA4C4D
+:10598000C7DC99A8673397323AFFE8F6A247B5E734
+:105990004A7EEF788CA3B150F8079CE74CC7F65AC3
+:1059A000B4EFA3CF55A5BB9C61B1F5C223055C2F15
+:1059B000E42428A7EAC8AE90C94EF066CBC323FD05
+:1059C000A4EFF2B91F30E55716D243EC6373081FFA
+:1059D00055C25D3F298673A8EED3A1FBC2DE3D7E92
+:1059E000E0E999504EFDF57B4DC7A0DFD4EF2CE3E5
+:1059F000B07E37EB9E8181A0E06103F98D6BBE7CA8
+:105A0000A5150344CD8D4C41BDABCEE328E0FA6E25
+:105A10008F21E425F95A2CB36D2407D9C54B11F415
+:105A200002909EE887B7316F632BF991B6FC12861E
+:105A3000793CCDACF30ED297678D0CE3AF37363897
+:105A40000D55B0FF1B1B9D86F9789F21B33AB423F7
+:105A50006E6A50A8FEA64685D79B79FDDC060FD559
+:105A6000CF6DF4F07A0BD45B300F29D41580716FB1
+:105A7000B6A43A75781FD0E8E5ED174CD47E1CFC2F
+:105A800001CC278C8F0B91BC6FEDD1F17B237F7CF8
+:105A90004882B59A12CB0E3B117FF7E8145017CC11
+:105AA000942D332BC0CF3678437A687F8E853210A1
+:105AB00091BB1736790BA17EB743B6E2FE76837BA6
+:105AC0008BF947C1A532E19DFE00DEBDD841F73A12
+:105AD0005B45FC3EB8C44CF166B07528DECC9664DC
+:105AE0000A3B86B7772CB086D01E033948E7D87BAF
+:105AF0008F4C7600C8C3A36EB48B76E62B189FCA72
+:105B00005CAAE5B7F4850BAA68BC4666453FBDBEF6
+:105B1000918FD7BC5317D2A15D65B97126D241F3DD
+:105B20000EA6A03FFBECC253B5C310EE50142E3F9F
+:105B3000B472A179E153479CB81FBFCE5A40FD799A
+:105B40001CAFD95FBD5D2F0DF0339DB773407E0C48
+:105B50009637CA611C27635EB582F1C174D827C627
+:105B6000F33B8CBC3E78A74CF72DE90BE5B075F400
+:105B7000007F670B14A6231F26917CD1F0D7C89D08
+:105B80005AF879C1A7C0EF32EE2BB89D513E67D1CC
+:105B9000766D3F90933A9457D9EDDAFA5B8BFAE33E
+:105BA000021A3C44E3D9E6E7722F7A9F03FB0AC747
+:105BB00015D1BE747C5F28D7A0BED87280EA8B1B3B
+:105BC00065C5E94479D7790AF75FB453666180EB1C
+:105BD0001796CD447AAADFA4A3F0C8F5AC8BE4C233
+:105BE00095F6ADC63BA2F719BDBFEFF2F55C8EA8E6
+:105BF000F6E01366B207DB1EB6E8F09E15ECAD7852
+:105C00008C2BDC55541D2C407B40C81DC3253D9773
+:105C100027CD16A25383ED517764FCA16554F5138B
+:105C200005D46FD88D753C6E41FB8E96633F17E3AC
+:105C30004DEAD6E6E35DDB131F953FA6CDC79B7209
+:105C400021332A7F2C2F2A7F6C94A67DAA755C5461
+:105C5000FED8B551F963351A78967B96A6FFF5CA3A
+:105C60004D1AF886F23B34FDE778EED6B4DF547770
+:105C7000BFA6FD66EF4A0D7C6BC35F6BFADFE66B78
+:105C8000D6B4DFB1F8279AF668FF492D771570F979
+:105C9000BED9EE3F49016CD0F791F73D6A99DE28F5
+:105CA000F7469E7B5202B7A7A2FBFDB980D3FB8BC0
+:105CB000129F8F05ED9A781CF3D835F1BA7045859F
+:105CC000B91BC6711A95DF21DD62E20EBFBFB66B4C
+:105CD000EED9F63F0EFD60BCA6C45C1BEA3B8CFF10
+:105CE000FA40B9378774745F615BBF4A223DB86977
+:105CF000158FAB5C30523CAF7F1DAC8EC6FB46DCD3
+:105D00006BA9EBEC1071A42D18474285E49941FD75
+:105D100056C6F17E3F4D57E38E3E1A37A3DC18A4DA
+:105D2000FCBC857E09E3C0CD3E66C57B9374CB0287
+:105D30009AFF9B0625995D262EDA16B0330FCC67A5
+:105D40005F155C6384BD7D52D0F7D4B3F0BCDDCF6A
+:105D5000281ED35BF0ED53188FE943E108749D21B1
+:105D6000733C3FF7C0EECF5F81F9DAE6A597A15CFF
+:105D70008D6ECF5ABEF7EB4397697F6ED95B1FDEFE
+:105D80007BB9E71FD875BA25A27DC838694326F3C9
+:105D900044D001E02CE6FD805CC8F5F9F20A23C589
+:105DA000B1AE01FC1502BEBFAAF8CF893BE0B93FF6
+:105DB00039FBEE443B1DEA65AC877E84D73FE59F07
+:105DC000A3FC929C5160DFA3FD1D179B6EC715724B
+:105DD000BA956D8DBD18076A4A343AD1CFCF32BB20
+:105DE000CA3E1907746DE07E75B4FFFE5CBFBFDD6F
+:105DF00049FE779118274B947A2B7F9E99834C4EBE
+:105E000017F71431F0A14F6A97505E652E943F8DBD
+:105E1000E48BFD89468A23A45B44DCC1B258131786
+:105E200050E306FB13EF9590EED3C34B289E8FF102
+:105E3000021C6F5CA193D6111D2FC832E7D3BA861E
+:105E40001E9FF5D7274831E6895A871A9F889E27D3
+:105E500084F604EA9965F1644F44EF7B4961557912
+:105E6000E170E4D7DE93D3517E9F32903E1C8A5E70
+:105E700030CF3C1431FEB442EEDF63FE78643DE681
+:105E8000878722E3D9CC41EF2B100C2A6684B17BA3
+:105E90004311CE7794CF77C2A0D8C91E04B587FE30
+:105EA0005F7D21D703D330976D38F219F7CBDB81B3
+:105EB000AFB1DC12B0927DD601FC87F00B012795C3
+:105EC000A1809BCA6D0185DAB707CA097E25E0214A
+:105ED0007847A08ECAD7025EAADF196820F8E701CA
+:105EE0001F959D81C554FF46C04FF09B81D504BFCF
+:105EF00085F66001C6A9D753B93BD04AED7B03EDC7
+:105F000004BF1D0851190EECA0FA03814E820F0642
+:105F100076117C281026F870E0309547035D547F99
+:105F20003CF001C137E33EC9AE58DF15C078854F5C
+:105F300076A27DF7AC6FA115ED6BFB7C9D15C57945
+:105F4000BB4FB704E31C1D8DFC1E13EF23310E0461
+:105F5000766808ED39FBFC678E4CA5F6B9D4BE19FE
+:105F60008704A7C4B682DBAF6C9991FAD930210AB5
+:105F70009EEB58DA18D203DC5A184FEDB61532F9F9
+:105F80006DCFE9FC2985DCEE22F96D3370FB41A56C
+:105F90008335855CDEAE29E4F75C1F16F1734ACACF
+:105FA0008BAD479E2D54EDA6F587717FF679B03FF6
+:105FB0005CEFBC5566BC97B5DDA3B3727B93DFCBBA
+:105FC0003A60BFB87E580FC585D97C6E2FDBE6AD31
+:105FD000A57539E6DF48EDD6A24753D04F6FF7AF2E
+:105FE0009A43EB6D9429AED9EE3B9082F76CCF8942
+:105FF0007C27DBF0786FA864F07A9E8D5A7F07E3E8
+:106000007E8303ECA5D763EC03D36E49CF3011C771
+:106010007BD41C338ED729E8D72171FE630FCAC405
+:106020007F2F30B0FBE0B92D60DF05510E54BFB6B5
+:1060300002E355BD85BE9D28379F778E3F20039C88
+:106040005AC7C7CF5D25BF8276349CF7E72D50BF76
+:10605000E1BE4D5E5CEAB04DCE35C86EEDF3DFCAF1
+:10606000C0F89743D29E8F5ABE2DF6F982878FB71C
+:1060700065954CF164DB8A375D07F9BCBB91FF3352
+:106080008B3E8AC3304CDE5CA70E4586639EFC3592
+:10609000CE1777FFA63A42CD268F3ADF589CEF6A9B
+:1060A000F134E2B15A9B2FC6BA869227579223BF8A
+:1060B0002914EF8164B12C9423CF19B8DC0A9EE433
+:1060C000F62425054D1A3C8F9A2FA0E60F44E70BC6
+:1060D000FC5EE029CBC462DEE77ED64FBF413AD7F3
+:1060E000173C1BBD9467E3923149873519D8127A62
+:1060F000EFA72ADEBA26063DA8E55328C700C11F30
+:106100001632712E9BEAF8383A3ECE64B682E02A07
+:106110008B3518435EABE533629C7F2BE4749B7533
+:10612000DFCE0D87F07C8F1A28376A8B2EB401FDE5
+:1061300084E0093DC9D74C7DE7D65722D6F51741F3
+:106140009F5B8CA162BC876E87F14A50AE22BF94E0
+:1061500050FC82D547E05D7DEE3F841DF0FCC575A7
+:106160002974FF3C6F6D1CDA47EDCC4CF46033F8BA
+:1061700053C646D0830DE932067D388B8C340EFC35
+:1061800059AA26E2BD0CD7CB35289760DDFB162631
+:10619000913EAC99FFDEAC310057F6C994CFB265A1
+:1061A00029CFD39CF4EF3ACA1379FB31EEF75DF7B0
+:1061B000502DBD9F9421CA67D1CF83B2723D53C287
+:1061C000702E950B2D14BF997C413E13E9A75148C1
+:1061D0007A3CFA173C5E736DAFAC790F6D528FB697
+:1061E0003F60548F764646B7B6DE3EEFCDD353615F
+:1061F0009EF6A5FCE1F68BBF3B827070958EE22483
+:10620000EAFB64509341F14D399881F99B1BCC8C8A
+:10621000E4B96DBED98AF2607F7A3CC9BFF6DB2C47
+:106220006487AECB6F8A433BD9346F550A96238C73
+:10623000C1AD183BBDE6D52D37D92791BC55F355D7
+:1062400082AC1CEC81BB8DDCC8093EF7F45419E527
+:1062500025CF6799F4EA96A783F9D8AD95D6E1D40E
+:10626000B14CBEF97EF876BAB796B8BE701AA11DC9
+:10627000E079A37CD715417B465A703F366DB69CBA
+:1062800069A47C6B4C3282F90D0BFDCC88F58D65D1
+:10629000E6483E57F9E4FBF27F3CC687875F590E1C
+:1062A0005C69DC2BF17B413EE79BA1FC69D310F2DA
+:1062B00054F58F1F29E0FC8B6C4B7AF58C31A67D51
+:1062C000F5AB22CE67E5469EA732BB615A1DDDC302
+:1062D00004BB65CCE77B51DC0BB5A727D23D717BB6
+:1062E0002E0BE3BD4170818EC77BD2F87FED8DB957
+:1062F000141F6A93FC29C13CCC97F0B9F0FCDA0179
+:106300004789307F5B0E97EB2CE4B7E27D358CB389
+:106310003872FDE0EF05B574CCC81EA6F8859E78EE
+:10632000CF698C88B7635C1CE317D1CF4DEED5C223
+:10633000532E68E12A66D0C035662D3CD5AA853734
+:1063400015713B7DBA5D5B3FC3A9851DD907E37419
+:106350003CCFDFC222E249F0F75E7E441C68DD6874
+:10636000FE3E5F76F7528ACBB6E5F0788F639536BE
+:10637000CE91C54212E22F7369543CD6BD663F866A
+:1063800097ED0BA3E341FC5E02F0A1A947318A7CA3
+:10639000F0EA689E87DE3DD2B7BD08CEB3600C5FE1
+:1063A000C7AB1D4D743FC5DAD388AF5C225F69B0BF
+:1063B000BE7C8AE8401D0FF92218B17FE48748F8B7
+:1063C000A151BE37701EE48B60A4FE2CE936D0FBD1
+:1063D000AB62BEA1F843E5CF72718FA2E6DDF4890E
+:1063E000B1D4BC9B55225F705754BE4E9FA3361943
+:1063F000FDE7BEAE95F1B1F810F92E68E27C88E5B4
+:1064000006917F837C182CE27C88F5A6EF56786392
+:10641000D98B0B055DDCBF63C9864F22F6B7AC7321
+:1064200085065EBEEBE10D91F951F7E33F3008BF01
+:106430009E517EED52B19D2F4FFFCB2BCD0CCD4801
+:10644000DF0728CF96159C31F27BA75E239EEB4297
+:1064500061FF99CCB3F2D12FDB11E2F26C9D88374A
+:10646000345B1533C681993B5513C750E3114D4B2F
+:106470005CB654D847727F7CC16BA57CDCE1F91413
+:10648000DF48AAF1DCCEC632D653649C6B0662DDCF
+:106490008EC156C0E9F957D93341C7C0BE4D17F870
+:1064A0007BC9FDB0EC67248F2EE468EADB449CA333
+:1064B0009FBF2D0BAA703E8BDB49FBB031FF1A1E2C
+:1064C00017D4C6D14CE23DE7C1E33B34F56D227EE3
+:1064D00072E5F1B57139D385BC21C62F8C1ADF1A4C
+:1064E00073FC8171B5F1BDABB8374F714F183A2EBF
+:1064F00036D2CDE9699DDDDF85713183E07F6606A7
+:106500003A9988F280FFE9E3797EAEC1A18D8F19B7
+:1065100030AF0BFA3F97B898E48AFA3EB5FD99057B
+:1065200012CACB27F0FDE8A4C1F2245A8ED844DE6B
+:106530007CB41C81F93470D3C35CCF364B8A0FE531
+:1065400073F47EFE7FF1877589E3BBC8AECE8E778C
+:106550009A2E630FB7058263F1B975F1FEC578070E
+:106560007EF78E91694F94E37BEB8CF86CC58E2996
+:1065700073310FB64DF0EB13693AA2A7F4DBD3B732
+:10658000EA23E829DDE873A13D9CAE13F95FF887A3
+:1065900071B427D2B76D8C31BF6AD7A9B0AD01D61F
+:1065A00011718E6DC29EEE9FEF8ECCADFA8871D2C6
+:1065B0004DBEB1345F7FFEA398AFE587CDB759C418
+:1065C000C3D4F96C776AF76733FA697F36A187D449
+:1065D000F936E3FE62F0D515E713FE75FF7C7769A7
+:1065E000F76733F9697F36F53B1BEA7C2D3F6C3E3C
+:1065F000BBE0CF76F1DE973D9E7F3764A8F7239A04
+:10660000FBF3CCBD66942FED6ABC50E8BB7351FA26
+:10661000AE49E83BF5F97369B914FF3D77F8267385
+:106620002C3D87FA8D093B93093B93093B13E1D934
+:1066300035A7570D077AFCBB1D37CF9541AFCFBEAD
+:10664000FFF4F81C80DFD9F18BB932E8A9D9AF9EED
+:106650007E330B1E29FEDBFB38FCF4E93E07B45BFE
+:1066600082CFCCAD05386918D7CFEABAD57977B9DA
+:10667000B95DB97C751E8F6F829C453DD69CE367E2
+:10668000187FFCCAD19B341FFA2FCFEE4D5F100349
+:106690002F6AB97C75217F1EADC08998CFC648AFDF
+:1066A000DDA8BEC752A77D8F25296923D987712C04
+:1066B0006445399660F6D0FB97D71673BD70335397
+:1066C0001AB85FE12C10791CF4DECB4DE5625C6BEF
+:1066D000E52FB1FD669DE709F477FF79D2BCE1684B
+:1066E0003EAB7973A306DE3BDDFE7DDE4F9EFDB142
+:1066F000C46DE5641E8F9936CAC9DF7B8B882BA2D7
+:106700005D3C143E3F7573FF7E009F1E8ECF540F7D
+:10671000C7A7B537690D9CFFF294DEF4C7894FC354
+:1067200031F13508AF51F8FB939BA97EA01EED888F
+:106730002BE15BC5AB9A5FD82C390BC85E67199A01
+:10674000FC60C61467AC7B1EA4CF483D6BB47B19BC
+:10675000DAA38634C58DF9EFCD7FD1C7CCDB7315B5
+:106760008BF85E523CE57D362719C91FDF9F3493B5
+:1067700061FC59B64C23BCD426D5513EA67E18EBFD
+:10678000447F353A0F5D9F7C3BE509E96DE8614048
+:10679000D99FC7EC31235FE93F56925D4800579976
+:1067A000872E5F290F3D7526CF434F323A315ED891
+:1067B0009E688C9987FEAD9BFB5DFB717F69B81F5E
+:1067C00023FF6E88D8976CE5F7EE589F00F546AB2F
+:1067D0008F51FC5DECFF5B6107A9FD4D563F43F90E
+:1067E000A0372A4EB45FF4A95C7FE0775BDC31E22E
+:1067F000285FBB0DF4FCFDA3AC5CCF99B9DD3EFB7B
+:1068000037B1DF27282B9644BC2436DD0D453737BA
+:10681000EA78DE9DCA97732D46CA079C6BB1D3F701
+:106820006CE60221F6A446F4BFEE56FE3EB5ACD8A7
+:10683000919E7E7BED945FFE96E1B50097DBA766A7
+:1068400018E8BDC25312F328A983F35DBDDE94A9F5
+:10685000B8CC1BEA4FAF45762C18C3C84E7A75C129
+:1068600043AD954EF28FEA8A919E7D73A6A20F7773
+:1068700063C3D877B1FFF2042ECFD5FBA5E509FCA1
+:106880007DDE6B64DF6CECFF55C51749D5485F7240
+:106890006F0EAE2BA23FDD3345F49F5B3C81FACFF8
+:1068A000E6AFDDF5D27739CEA59DF9C8C7E87CEC17
+:1068B000B1EC29F4B758E4BD86901FE87745D6A31C
+:1068C000BFC522CE535A506EEB8E214FD432C33EF9
+:1068D0006EE442A0D78C8CB154AAF5CF7AF475A19E
+:1068E00018E7FC9038E71FECF7B4C36A270EF83DB1
+:1068F000E0EF3C84F8F872E1A9F4F1B0A5076ABFB3
+:1069000026BFC76EECFFCE16F97103B0F6BEB32DED
+:10691000D05B8CDF196088878911F98B62BFF625FF
+:106920006B52D0EF81B3F420DD7604BC236B0D03F2
+:10693000CFBF2CE4080B16D2F306B12E475AEB0C4E
+:106940008CBB382C3ACA7360CCAA9167736A53A681
+:10695000A6A10BBB9C291627FAF75DE41764E0FBA0
+:106960000D189F7CE73686F75F59699D12DA75FD31
+:10697000F388F7C657897BE13E5F2DED27C3D6EF3D
+:106980009731F25FD38273506EF53DC35794F19205
+:10699000B6DD91C6F31FEE5D181F7202BD672DEDC7
+:1069A000C24F4FB00C70F830A69F71A9D9D5827232
+:1069B000E657091477D6B7E7B320C8FBB0ECFB1B4A
+:1069C000C277C8F9902E4F6C169E5BB6289EECB924
+:1069D00076A97506F931F7E858AC78D1CE62EEA702
+:1069E000FC8F622BBFCFB54FE4F4631F3F72E1B859
+:1069F000ABE7FF77849EF949B293DE7F52EDA34D5A
+:106A000043F8478E913A215F845E11F833339F1922
+:106A1000F9452F7979B074C76BAFBD96CEE8535B5B
+:106A200048471B84FDA38E139F1FA2C678C543F25F
+:106A300052B27AB8BEB0FAED4138AF75DFE963CE35
+:106A4000FF85A0FB35D90FD9B17FADD3E7C632FAA8
+:106A50003D98969C7BDD783E2D33FBE995ECBA960C
+:106A600033CEDF613E56F028CF37D89F5D68C3EF45
+:106A700041590E1B64D365E2F146D027CECBD8191D
+:106A80004691AFDE7280E799B658CABA30AFA1C559
+:106A90009256466AD8C2F356D5FE16CB21D20716B7
+:106AA00085DFDF5A507F48B84CC04709AEEB10E194
+:106AB00043ED7750C85D8B1266F85E5A9CD24AFD52
+:106AC000CCB2D78379CAE63446F744662BF017E296
+:106AD000355FC7CC31F4C9BE62AE4F5A4ACABAAAB2
+:106AE000697D327EB98EB5D8CBECA4E711EFF07C8E
+:106AF000738696CFBF137857C76916F9B477AE4E31
+:106B000009D68EC33893F71BA4E716CB027310F592
+:106B10005AE2F8CB8E671A39D478FBD78AF1BE4394
+:106B200079AE4F2CB3E27806C6F7158DF7E1629C7B
+:106B3000FFD5FB7BC02CBD474D301D58D81EEB7DCB
+:106B4000ACFEF313F7F2D1CFFD6079BC561B870280
+:106B500079EC1E09FB5A5672E65035D5F0F8D30B86
+:106B6000C29F51FD927431F60B127FBF3F28C52B97
+:106B7000F45D0CE1A7A4C769F130F03E2D3F876FAB
+:106B80001A781EDE37694C7C874ECBD7DF1CFF3866
+:106B900045939F057CEC31713FC623DEA7F588380D
+:106BA0001DC2186FA0179D04FFF7C7891B9C3FC328
+:106BB000EFAC99408EEB605CC9E127FA3639BA5DDB
+:106BC000C8EF39E2FB0FD178FEC9482EAFA5477A4E
+:106BD0005C78AF519BD69B118BDF5F7CF84206EE51
+:106BE000E7C519FD793B74DFF4E269E7E602C4CB3F
+:106BF00011EDFB6FEAF84D47CEA7F822FDA5C0E5E1
+:106C0000DF2F4B3AB37125D98D0BB8DDF87FFA7DB4
+:106C1000B317E6733B7597A495CF4F08B91C14FCC6
+:106C200060BB20D3F743EE2AF2AD403A6A93AC0B37
+:106C3000502EE73CCCF3F29A1E5BD5B328067FB406
+:106C40008CF2FDD5C808BFBA7CBD91E45EB3253790
+:106C5000F972F728439FBB9FE4947ADE558F9879A9
+:106C6000BE8A8FDBD1E9BE7B290F263A3F65A87E1D
+:106C7000D5239D440F6A7F138E8FF2C57223C515ED
+:106C8000CEA18F81713B2BB733A2D75989C898C049
+:106C9000F163067D997460491C8E6B10FEDC0B6AF3
+:106CA0005CA4A1CCEC8978DE705B99B93A824E9AEB
+:106CB00019CF0F8E1EFF372355FB22ACB1630CA8F2
+:106CC0007F31C694269FED973B6478F2FCB4950320
+:106CD0007CCCE30E43E7A3C571BE2D237BAC0DF343
+:106CE000D2C00E5ED3B06004E2B74DF6BD68033C7F
+:106CF000F47E68A23CEADF0B3EED167C3AD4F9053F
+:106D0000D90130D2187B9C1DC497E2804EC6272340
+:106D10005F34E7EBEA4231F6795CECF332F67878EF
+:106D2000E4F7B3C70F89FE1A7B1CED6D4FD4FD4607
+:106D3000248C76B627863D7E4212F105912774C2D7
+:106D4000E0DCD50D7839313999BE975690C0EF5DAA
+:106D50004EA07F52067EC8ABA7F3D17E992DF57F5A
+:106D60001749F8438C60F047FE05F9620EF3BFB691
+:106D700048223EE2F735781B9F7EE573DE3692D1DE
+:106D8000BA36C0F9E1FD46DBC5F93362DD67A48E92
+:106D900052FD37506511EF13333C9D88FBAC41F732
+:106DA0007451F772786DD39F77AC1FDCFF8672ED5C
+:106DB000BDD9868B3C2E625AC2428F4B9897AA6DE2
+:106DC000BFA9CE107D2FA8B94FBBD96B885E0F7DB0
+:106DD00017D421D69BDD711FDDBF4FCDE6F944A648
+:106DE000658CE204D1F76DA6B15D1E3DDACF0D8C46
+:106DF000ECFDE83839E6A952FCB081B12D12E579F5
+:106E00006BDF7379A6FE73FE7D94D63A9CC70E762F
+:106E100010DAD3D1EF49A8F75AEAF751553CABDF66
+:106E20008F4ABF4D47EB63C129D4AEC6FDF17BB895
+:106E300055E911F9E42B587F7F7A7F2B187BDF9B74
+:106E4000DBEA29CF2073BC7F6C189AB2144678C84D
+:106E50005AC8C86F003C68F2094CD9DB699FE71635
+:106E600033364C223C68DA3340D3D3FDC0426D7ECA
+:106E700001EC530347FBAB57F2534DD9F99795F308
+:106E8000578A639AC4BDE49451E2FB97A5AC14ED14
+:106E9000A2F4DB9EA1F33807E781715F749C62DD89
+:106EA0003B6E82F1D18FFC77C12FCDE26E5BFDAEE0
+:106EB0000FF3C8F41E9B54CED72C0DF3F27BE912CE
+:106EC000467C6E8A6766CC8F972A4C1EC4BBC90469
+:106ED000306C5932327306D4EB453C7B8DC46484EC
+:106EE000995531F3F8A3FA5DA1107D5768A879D4BC
+:106EF000EF2BB2207F4E9D67D077F52EF33CF97BC8
+:106F0000D6E8E76B299EA9CE3F14FE87FA8EDEBF36
+:106F1000D5BC3781C7531D44AF8D03F44AF07C4183
+:106F20008FF83CCA85BBD5667B5729FA0F671E4C84
+:106F300050364A11FB08CED2F3EF037EBFF1FAD7E9
+:106F4000617792BCEFDF9718EFFBEE8BFE22E4DA5D
+:106F50003A7C5909F35E1A19E531A4FBAA3F972937
+:106F6000FF00F6A0911311DF4980F1D63DCEEF1F4F
+:106F700036E3773EF0FEE7C040FEED13166CF7D126
+:106F80007736D4BC5CCCA35D5B32F03E72F47D837B
+:106F9000BD11C689986FB2990513409FA4F43105BD
+:106FA000BFF3ECB96854A6037E6C7DA05001BF937B
+:106FB0009989EEA52AAD7E33FF0EE10A166967EFC7
+:106FC000976EA5EFBD86BF6494BF143ECF88EEC315
+:106FD0009FC3C4702EFFF8DDFB7AE4CBA97D5D7AF8
+:106FE000D4F393FBFCA47FF6D94F3DEDE2E7629921
+:106FF00011911F751D5B54CFE98A9F972CEA275F7B
+:10700000306AF8FDDA5EA3461EC8175BBE46FD6512
+:10701000EA89AA67D33FE3E3F928DE2DDBB5ED5318
+:10702000443ED0DB2ADF5FC3AEA173BC981633CFDA
+:107030006EE0DCD5736EE27174C6C7796E94F79F0B
+:10704000464D40FFC04771E864C42FD8172995DD2D
+:10705000CC8E7958E54C998E72BDB2F31DA487E4AD
+:10706000B33C0F3C7AFCFD5FBE95857EC39EC99DF7
+:1070700059682FEDF9F2153D8E57D5D3CBB03E1997
+:107080004A1EA4584C78AA10B43350CFE34491F56B
+:10709000B49E4AE765E5E4CF504E1A876EDF33D9D8
+:1070A000C2C2E4877526A03DC77C7CFE64B3CA5784
+:1070B000EC2F97705E84819FF654EA526A619F7B41
+:1070C0009E91156CDCD3F34602CEBFE7EC39CD7A46
+:1070D00098FE22F345ACFB5A71EE532B7BC9FE7E22
+:1070E0004AAC2BF96C2FC5A15395DE30EADBD4C333
+:1070F0007AFAFE37B3F0BCC8614CA1389ABA5EFC8C
+:107100006E2A3ED78272DE88FBB3325628EC7E2888
+:10711000332A8355988F9ACC764A486B532B7D41FE
+:10712000A4E7E4A59C9E93ADFEC318BF4F5EAFA33A
+:107130003845F259DF06F4CB92CB6505C9E44AF82D
+:10714000EC10F3B78AF9D4F9D5F58CA8F44BE87EA6
+:1071500024B3E362FEAE2A138EBF5ACCEF14EB5970
+:10716000C5E83B2CC967AD55E82F27839D41DF3328
+:10717000B8E2799A35F345B7274FD99945E7E0B199
+:107180001ED90AE3A5645B365441B9CEA123FF3270
+:10719000A987513C3DA9279DE47D524FA128278A0C
+:1071A000FA69420F703993D4F3502DAF6FA1D2A476
+:1071B000CA17873F8CFB98DACBB87C717849BE98A8
+:1071C000D2B87C51E9B856952BCC5A321FEAF70F4A
+:1071D000FFACB5069E7BF773FEFEE5BBD95CBEBC7B
+:1071E000FB25F7FB4D69BFD3A35CAA42C305FA4D4B
+:1071F000BBC0ED33951FABBA25361148639A83E7C0
+:10720000871FBAC89F3B84D9D500AF6312C929959F
+:107210006E6B05DDAEB3EA8349D8FE8189DE773433
+:1072200039CEE598C11EFE83AEF7417CEFF8F73307
+:107230007AEF5D41F5827E434B492E9A846C39E4A6
+:107240005860413E847948AE1E7218E9BC0E083A77
+:107250003E67AFE908C33F5BCCDFFC693ED4FFC1AA
+:107260009EEB40934C3D971E412F5F88F33B2BE8EC
+:10727000A629DD7B53C904FCFE621ECD7BCEFE0D2C
+:10728000BD7FB2DCF61F9FC6FA2EA73A8EFA7C4F5E
+:1072900068A519CFF5D09B1F9F40B4ABE35F237B5C
+:1072A000EFE4E37E339AF8D0123BCF7890FCF3AD55
+:1072B00088967F8B4A860FC8BF7A6691791E12E73F
+:1072C000EB59421E4D55B8DD5E6FE5E7555FB25F85
+:1072D000A6FE8A8BF655AFD28DF2E45AE47F9BF27C
+:1072E00024D14B7D3EA797BD829E0F0A7CCEEC63D6
+:1072F0009DE897ED2F986E190BF83EE2D213FF1C14
+:1073000019BBC65206CF1D2995F04B026C7AC9D61F
+:10731000B5A900CF5224A2A7FA92AD1D4DD07F96F9
+:107320003541A903F8E8F9B31634AF0E05BC8497CC
+:10733000E972F8E354179E1BC7D3CCCAB08CFE4F3A
+:10734000BD63BF8CFAF66DC4AB11E32E1EC1677529
+:10735000041F576A2CB88F23A526212F3DE3515EC9
+:10736000CECA37D58FA1757C7D6C4C1ABE776F5015
+:10737000F8953CA7FFC9827EEACC276B53A0DFCCEF
+:10738000926619D77BD42C91FC3CDAD744F993C789
+:107390003B39ACD22D3D077479BC6F5B7312B66F6D
+:1073A00097483ED52B2F1DE2EA8FD3A73A7E0F0BCD
+:1073B000B6E17730CF29AFB7603EF5B1BE05CFCC8F
+:1073C000013C1C7F533FC4B84D1FADC071DF4C243E
+:1073D0003A9E6D3569F4B18C4E69845EAD1E6FD3F3
+:1073E000C0F54A0DC5D3CF2992E50678DEF35DAD31
+:1073F0007B3991D152DA77BDE87B4CE17C79CCA125
+:1074000023BE3CD6F7B89C8AF05946FB919976DEAC
+:10741000FA921AB2AFCE295BF54467820FD5F154C8
+:107420003A3E8A4F231EED9CFF8FF66DB320BD1DA3
+:1074300075BF23E3395D67891A57D0A1AADFF05DD4
+:1074400071A49FDA51FBF37E86EB5138FE6B94D723
+:107450008F237DD53B64A2A7A3CAFE9A1486BF27BB
+:1074600062D2ECFFFE1DC99AF19775DA3470B45DF3
+:10747000B5CFFDDBA7CBC40E66A447D847F9C23E03
+:10748000D21F77E0FAAE681729EBE8F74906D9452D
+:10749000F9DC2E8AB68754BE6ED689B8AC8EC76525
+:1074A000A3F9DF58FAC3EEF1D82A498EBCBF5BC6F8
+:1074B000BA7390BEE6A31286F11ED075A723FC1501
+:1074C000EB6D8B07397CADCC7669BFBFCABF373F48
+:1074D000BED4771EE59574364CDF6165AB18E507C1
+:1074E000E86B789E115E66AD88D48B25FDF12D8DFD
+:1074F0005DA44BD89B8578AC386BE4F18F9EE8385F
+:1075000097EA1F8525F22BAE522EEA93F9B87BE657
+:10751000F078677F79338F931509FCE5941A695DDC
+:107520008A80F7DC16FB9EB5A454FA41F9A2DF0766
+:10753000DF2980EFAF90E6619E3D55B1D79152CAE9
+:10754000E3B5779778F24AA12C2AF11596225E3D91
+:10755000605FD377C53D649FA9E3BC33CAE316FDE2
+:107560004661C9BCDC0E8FEE07ED63689C86D8E3EC
+:1075700040FB387A7E6EECF643B839FC7D23FB3055
+:10758000D243060C64A6F2522AE3E516FAAE468808
+:10759000FBE70D1ED2F34691AF88371091FCC7F47C
+:1075A000F534BE1C9E41F7582DD82583FBF9917602
+:1075B00094AC846A22E3AD6AB9A894DF73CE28152F
+:1075C000EFF34C6013C8AFA8BCFC3CEAF343CDC357
+:1075D000EC6557C87B5EF363D349FAC3E4275FA524
+:1075E0007D600E4A91DF391F6ABF894A941C8AC2A6
+:1075F000D350F35CED79DC22E8F66AD75D657ACC8E
+:107600004EF9D12ECE076B057DF5DBD53F1E3FBE73
+:107610003F1F86FECAD9FBFE93F87E4A4268A53713
+:10762000C67E5E14FBF931E5C1D370CE1B8CA1FB85
+:10763000D1DE9907A76302D27BC7F2F1F005B09EB5
+:1076400037C5FC2D9695EB6F85475B1CBA98F91EE4
+:107650006FFE787AA20D3FD9FF95E3DCFB6D20A782
+:107660005B1E7DD0ACB08175306BD915CEF947E388
+:1076700013755D6D5B305E624DBDAAF7145A5CAF49
+:1076800024E07D69EDE74D76FC0E46B43DA0C6438F
+:1076900054BDA5C64D54BBA4C2C1E31F33EDFC7B52
+:1076A0003D15F669A4DF0FB2AE1AF2AF303B6D2282
+:1076B000B10AFD19DD5AFBE43ABF57463B2ADA9E70
+:1076C000A84D3345D907BD7A94DF1517B5FD54FE93
+:1076D000F8AC54C45154791765479ACF9F4940BBC1
+:1076E000EBED0B67282E148D9FEB2E5CDE9FBDAE5D
+:1076F0005D4FF783D171ADB72FE4D2FDA011AF1B61
+:10770000C1D4CACC3FC48C80974C7B6B9511EC18CC
+:10771000A38329F8DD36FC5833C60D8D17789C7C81
+:10772000849DFBD7898BC12F85513395A07DC1786E
+:107730007CCE48EFD3995DEF91BDBD09EA86219ECD
+:10774000C79E19A68B110753CF638AC0EF6EE6B7A9
+:10775000E3EF814DB18BF7F72E46DB59FC3C2DA2B0
+:107760007FE2622D3E2DE23C27835B43DF79ECD341
+:107770003E6F11E76B591AFB1CECA3639F43A27A7F
+:107780000E13B6C5E1396C59BC4D8A750E998B2F15
+:107790007F0E5B845FA9D2EFB4AC04B2AFF7A6E86A
+:1077A000E8FB417B13C359CB31FEFDB299DECFAC70
+:1077B000107136B4A4109F6BB797BF8471DB71A3AF
+:1077C000F5748E7B25D1FFBC8EFFFE60CF78EA1F5B
+:1077D00027B383F8BB8007FBAAE9BB1BD1FCBBD353
+:1077E0007A00DD33B6CEB93D6B019C8325FB8099D1
+:1077F000FB9B83CF07EF3F4A05BE4B7BF8B954A6EE
+:107800009DD4A3BD5EF266ECF351E38F7BA49D3A59
+:10781000202B36AAAF8BFC98913BA3ECE9B32D64E7
+:10782000675BC647D5F7C039D1BD8E9FEC16D9A18D
+:107830003DAFEB8738A74A1187307F7D8AE265FB31
+:10784000FA4E717EE9D1C62527F75DFE9C5E13E7EF
+:10785000B453C4A17E2EE2009DC27F7E23E0A4F239
+:10786000CD809BEADF0A2804EF0A940B61C1CF7731
+:10787000563ECB4717AFAA84FBED47CF73BF7D7F42
+:1078800062A883BEEF74DE42DF17A4BD4D14BFDBD8
+:10789000077C722CCE49BF1F7834DB4CF1B3A3A513
+:1078A000BFFB7B8ABB7C6BD1F1B80BC7B37A4EEBC5
+:1078B000704E186F5D858BEEA536E04714A1FFEE84
+:1078C0003289BEFF341B0E04EF45543A37F569F197
+:1078D000590FFF6595F1DF1DC8427F618C8BE8A4CD
+:1078E00042EF73223E37BA4F915F1E57D8EE1B8787
+:1078F0007180F17A26BEFB143445AC3B0E6F42E03A
+:1079000079538944DF731A0ABFD1E58654AE2FA399
+:10791000EBFF7534D7831BDDDBE83C773BBAB25015
+:10792000AFEF13F910B3642948BF5F2877DDB11CAE
+:10793000F65B91651FBB11C02DA35368FDFB4A4F39
+:10794000531CF8D88557C621FD1DB3765A30CE7921
+:10795000CCC9DF53871395F97BB79DF22D31F2A483
+:10796000D5F258E922FAFD957FFC7CEFDAD17CDF75
+:107970004C52F50A8C5B81FB4D42F9DEB202F9C331
+:1079800098B983FCCCE873AA705FB388DEF364FC1B
+:107990007B4FBFB6862C783F1CED67027D6C42FFA3
+:1079A00078F7043D7DAFAD5EE6E782E788E7A41F88
+:1079B000A3137E99767C66653E63FAC079601DDE0E
+:1079C000D7D03AF13EAAEFADBF9262F8B583D6C9DF
+:1079D000FC9E58F9B0D1CFCD76B2209A86B3151659
+:1079E00076A19F70309FC6996DE5E3CC12717C9BA8
+:1079F000A0FF59177594DF81F4D680CF95CC2779F5
+:107A000072CCF550571DACB71ECEC641FE469356FC
+:107A10000E09395B5F5245F7BDC7DC07C6A3BEBF81
+:107A2000BE74E5E13227C29FD45441B729A52FD5B2
+:107A3000205D5A942E8A2F4C76CB745D787DB936B2
+:107A40004ED1AF17A3F44BB4BEA88F923B11F7549D
+:107A50004E43C4F9CF729F4B88A483ABC7CB1C2F76
+:107A60007EAF7BD6051EA71D8C97F7E973A503781B
+:107A7000893EEFD878893EA7013CADEAAACB1D8CA0
+:107A80005F156FBF2E79C91A99E71B8DB71F8AAF93
+:107A9000E6D15641AF5C9E5708BE7D3B3B4471B773
+:107AA000B74BF9EF4B1D73FF96E2BFB358A8630DB8
+:107AB000CA45E0CB3942F9E823E44C341E06F8F419
+:107AC0003F282EBFFBF3B7282EAACA2113F225EABE
+:107AD00013C11FEAB999901F916F2FF0EF875E2DA8
+:107AE0007FA87C45EB213F38A48FCC1FFCDFC55F0E
+:107AF0007B71CD18177616523CB8CAD1A5C77BAC9E
+:107B0000C950D23D92887FD23A9C91F53C6E1C5967
+:107B10004F712FA1F7D4B8A6DABE3EBB2B41185542
+:107B2000A4474DC2DE51FDC47D8E53647FAAFA5432
+:107B300016F7FE57AB4FF7087D3A54FBDE73BB795F
+:107B4000DCE7CB433D0F801C9F9C6FA4EFB84C0E2D
+:107B50003FCCDFA3708449FE6F7437911F0CFB6923
+:107B600046A304E67544E6F3A9E5BEF36D0AD6EF35
+:107B700095BBF40AF507FF16E0038656FA9D860DBD
+:107B80008F737D1357F451D6E5DE83BAB34F99E670
+:107B90004AC2EF616F5F83DF010B2A8CBEEB98B5A1
+:107BA000B48B45EEF7A531DCAF9D9CFFD61D076871
+:107BB000DD1FEA69DD6857039D4F969D0E05E7CFEF
+:107BC000F6DB23FDEC7DD9F7DA9D00B77C696C0804
+:107BD000D17AC3A37E01F3EC33578D074B8DED7340
+:107BE0001F18F50BC0C74673D504CCA3ACB6DFDBBA
+:107BF0003E1FE5DAD95B2660FC1BECBC56D4B7838C
+:107C0000F6DFB7CD8CBF3B5DED789FD631A2AFAB31
+:107C100006BFBF5AEDE0F748BED1BE87C64C407BD9
+:107C200039ECC1734F349F0C22DD4C16EB65172FD6
+:107C300051FC41BD97D9739ED347FFF8400FB88FD1
+:107C40006BBF5C45F722B97DBAF926A0D5757D3C9E
+:107C50007F0CDBF17BE058BF28861D00F35CE74B0F
+:107C6000C6F3EBCABA3786DECDEDFB36E083E7F626
+:107C70006470BC44B76F1EC3ED82B8AFDECF7292A2
+:107C80003DC0F57FB0C012F33B55B7A9FAD21A3BFD
+:107C90000F452D5579A5DA23805FB32102BF9BC61E
+:107CA00070FFFD7CA9A703F1F77DE77F0A710BE563
+:107CB000F152CFF631C391AE045FAD9763C601EECA
+:107CC0001CF3A3C52B6E4113EFABBE73E96FE986BE
+:107CD000A6DB41746550E9F821A2E3FF8BF47BE257
+:107CE000FBD0EF207974FE14DDC347D3B14ABF0344
+:107CF00074C8E69B9206E87928BAC17E8B9206E8A2
+:107D00007AA87EFBCEBF1F93DE07C6E9BD2CDDAB94
+:107D1000F4B759D0917A0F5429CE79FDD78CECFE67
+:107D2000A33D46F577C6357E11E83FCAA3AEB072D3
+:107D3000B97FB43797FB193D66BA9F9AE95E29BEB1
+:107D4000BB0D5D23C6AD11F27EA6DB755939AFEAD6
+:107D50000B55DFFD4F7C774398008000000000004A
+:107D60001F8B08000000000000FFED7D0B7454C75E
+:107D70009560BDEED73FA9919E3E881692A085C022
+:107D8000164640EBFF053D7D10321FA7C1180B9032
+:107D90004C8BE0041B49DD60E2903D9EA131321224
+:107DA0009FCD621FCC7866BD390D038C9DB177C025
+:107DB000561C610BDCE237384BECC671189C4C3C0E
+:107DC000C243086C6CD318C743B24ABCF7DE7A0FC3
+:107DD000F56B750BDB43EBCC6457E740A95EBDAA9E
+:107DE000BA75EBFE6FD5D37A3363CCCED817F85380
+:107DF0003DBCAC081A19CB65F4F305FCDBE2F2EBF1
+:107E0000252B63DFB9EECBB443F9932CDF0A671E51
+:107E100063AF5F35CAAC88B1AEA9E3F6EAB387FABF
+:107E20008F75088C15437B12748676EF54C17700EA
+:107E30001E31D1272E9D1E7DDE9F4CFDAECD958738
+:107E4000B3FA329D63687AAF3E8DB159F89B0ECA82
+:107E500020932D33A0CCED5AC712A0CC2CF9369626
+:107E60004C622EB1843193F29EE9CA6BDF15F03972
+:107E7000931983FEEB95F556307F5D0DC031CFCC65
+:107E8000BCF189387AD3C9C9D05ECD970AE369D7E6
+:107E90001DDE9FFEA529F3E430362E57A0F5CDFB5D
+:107EA0008CF94CF06B756EEB023603E78771CCD121
+:107EB000C7A9601E99E9011DE55EDB2AE83F6BAAB0
+:107EC000C9E1E5AF4BF8DE6CC6DF1B3ECE7AC64A91
+:107ED00086C6D9E209C8FA54C68E494CE92F5B6FB1
+:107EE000C167E7F8C37A85B23E536ECD55C4CBEB7C
+:107EF00092C7E10778670F868D6F1DCB583A63559F
+:107F00009F699F8B0E6D7D385C30FB58FAE54F5FA3
+:107F1000C07C4633C78F395D47F8795D32FA903EB1
+:107F20002AAED4EE6293184B96EC87FCF0DC2A99CB
+:107F30001D3E053633F6537EAFB8020404ED9FC2F2
+:107F4000BF1480739B6EEF5A27D0DD166C4C1FA2B6
+:107F500097250B4C1A38962E49D4D49B9AC769EAB8
+:107F6000CB574FD4EC6F73DBDD9AFA431B666AEA9A
+:107F7000AE274A35F5559DD59AF156EF9CAB69FF72
+:107F8000D6EE6F68EA6B9E7F50537F74FFCA11E98B
+:107F9000221A5F88B691E98979053BD2BF884D3AAC
+:107FA000FCCFC59CD3A3F7F7217FC27EBD6EAFB7D0
+:107FB000AD82FED5573F8DE7FDB4F4C5BC7200F924
+:107FC000A356D91798C72B407B8D52AD95BE45F46B
+:107FD0005E633645E41B95EEB60A5611C7AF66DA06
+:107FE000FDAAB06DBDAE477E2E1AD0EB61BE5937EB
+:107FF000B5FC572135FC06C767CCAFC7F584CBA5C8
+:10800000FFEE18937A399E60B57F01FCC4ACC98C31
+:108010009547C7A34AA7B75D37635F6FDDCAFCEA20
+:108020007A2B58A00EE93EDABA673BFC7A926B5184
+:10803000D61DBE5E15FEEF6F865F81EF5FFF23F3F7
+:10804000ED1310DBB288FCE6DF5DEBCFB52B400211
+:10805000BC27157AA8918227128B900E980365830E
+:108060007190F9510ED433C16F8452961C04AF380D
+:1080700068EF34302AEB717E711086A6D245EB355D
+:108080000ECA8D286F452CA9EE9CC7EB8E065E8725
+:10809000F7A82ED5F2BAE73E5E8792EA5E27AF4395
+:1080A0003FAAEF5A8CF5CEB8C0894401EBBE2558E3
+:1080B000370E1E5ACA4BFF05814A99E49638E85D8F
+:1080C000A7A77EEC22AF073771FAD0F283315EF6B4
+:1080D000F9B3195F3D3C3F81BF4DC2FD5CD76F00D6
+:1080E0003CD48A82C30EEFD50C32873F15F7D5E416
+:1080F00090D997E033A033316D88CF8C2C98B14A5A
+:10810000203E790FF1ADCAEDE1E368E9AB1EF55A07
+:1081100001EC3BFCBE3119E530A7A7FAB2E0122C06
+:10812000F1F913D03E7B32FC4B1E4E1F2A5CA2326B
+:108130005FA5B55F8FAAB6321826B75917D15985F2
+:10814000799D2CD987CB6D7150E52F2E2FC2E1562A
+:10815000E5AD391FF86C1AFB3A7C96B90A6AB3AEE2
+:10816000BEABF0D9BA303E93ADF79684F019103219
+:10817000D3F0D9B7899E6E275F4E09837526184FB5
+:10818000F60CE823CA9954C04342243E9BFB1BB221
+:108190001FA2C89737F01758676E7E989C51F45C01
+:1081A000B5AAE7FEA8B3A2DDE2677A11CB707CC85E
+:1081B0002C3B31D273B53CBE0906BA6BA80EF890C1
+:1081C0000F81BE631F15DC06CF9BC9CE62B85A80F3
+:1081D000C7AAE2318C6EAD712F9D90ECBC05F5EC19
+:1081E00018856E4E66A711DFC376BDC742E49DB504
+:1081F000E8CBF101CD3709C7736622BFD540DBC696
+:1082000082E1FD33B10FF09935C87C3E78CFEA08A2
+:108210000858AF46FD9E8DF4CFEA51FE575F09E83E
+:1082200025EAA5E5975B7400BF3F01A4578B7C51FD
+:10823000309C2E64E6D3E37E7CD5FDAFB61F349030
+:10824000BC0EDBFF9A41B0CF004E39D5E420FA1ABC
+:108250006464CFC84EC1C748BEAC21BCA8F6E3AD2C
+:10826000F6266817E8912E627BB340F6D0A76CB370
+:1082700081F305F3FA557A86E7CBAF303911ED3447
+:10828000CBF3D47E6C1323FAA8B6973C556747B856
+:108290000676CC44B824BD0A973F15C7BD60E2708E
+:1082A000F9DA087FD50AFEE4411D3343BBBF4F69AD
+:1082B0000FA35FFF20B7D3FC4FC42B70DDC8F04382
+:1082C000BF07D04E069368E5DD03FF4384F7DC6902
+:1082D000773FDF015DAE28F0FC6F856E3FDA2451F9
+:1082E000B93ECDF5FD7CA0C77F916E7CE266C80FDC
+:1082F0003944F7D5F6CF27901E52F1D93786F410BE
+:10830000C24DF8E8B34483DBAA107538BC0ABFE558
+:108310008CC8572A9C2A7C577C7AAB0BC67BB3E768
+:108320005F131CF621F84B45E77E84FBCDC14F67F8
+:10833000B888EF9235766634F96652FC88A44C967C
+:108340002BA6A23E8873CC85758CCB74D1BA4C36E3
+:10835000A31DFD024B2793F360487382CF8CF0F787
+:10836000A737ECD243FBD6A92233C1FB5BB3BC36A3
+:108370005AA7FE0986EB9993E96103D6E8F377657E
+:108380003E29119C835047BFC7C6F1A29F68F4F8ED
+:10839000E0B95FC7D61C0AC1CBC102EE8F9DCDE705
+:1083A000E5DA171ED97629843FDA0FADD3D4DDBDC7
+:1083B000DFDB762954DE6E1044DC9736858EDBD900
+:1083C000C004F45F5A453BE1A143379086F56B2C1E
+:1083D000787E0AAE0FE78F00FF3FE75B623DFFD27A
+:1083E000A950F68FE1FE69FF241FF90DEAFC1F2B4F
+:1083F000EBFF385F177338A6011EBAB3BFC5709F75
+:108400006A6C7C3F4D50727AE67243F577869E73B4
+:108410007951A53E0F3ADE73121DE91CA8764C99DE
+:10842000F611E97D27D2BB71A8BEB548D7E88BF01D
+:10843000FE730522C17BC016B93D5BA1979D135CFD
+:10844000DDD9E8DF3FAB736C8625CECBDC3A1EE589
+:10845000FD56DB7AA253E6E2EB58C038BFCECBF430
+:108460007819E8D179FEB782422AD68DCCC286F837
+:1084700057F50BE7893ED101FDBBF2D79971DD5D60
+:10848000B6F5661CCF84D6826E383CEABA0FECE6AD
+:10849000F3CECBF489E0E9B2B9B97BC501A83FA31B
+:1084A000AC7B5EEE3A6AAF6AF49F14097FE06743E3
+:1084B000DDE868F5E23C2687BD46C23A736CC6B279
+:1084C0004F7889EC1355BF0DE94FAD9D72FABA9103
+:1084D000E463D7159DCF44F2535E3007DE9FAFBCF7
+:1084E0006D0D727BBE6BBFA35FC4F71C02F9E3F393
+:1084F00073BF4D769D35772EB7E7B3567991549873
+:108500004FF0A13F314FC55B9E565F191D17B7A0B5
+:10851000FA30DED4EAD1592CC090BE2AC2FCF370E6
+:108520007D3BBB40B1D7725931DA2B2D26DF63C8B2
+:108530000F960D423AC2A1E27545818EE820867CF5
+:10854000B06726945DD965B4AFFACCD31704985FB1
+:1085500017DF6643BED0DB8C7EC41BB38A1F0DA819
+:10856000F34DC2FF3325B2B7B08E842F7D3979FC2D
+:108570006E96C786EBEC32B0A648F2A7B680F3FD44
+:1085800007597E920FD1DA8D1B04D27BAA7C376605
+:1085900032D937C278DB8C5CCE805FD22B40BF3EB5
+:1085A000A417A0FF175AB3F7E905A27B19E5F1ADAF
+:1085B00052B1EF120BB91FFE668189CA93CA7E546D
+:1085C0007F7136C33582FCAFAAF23084DF94CAC70C
+:1085D0003365F2F14C222F7395713F2EE27CDC5C07
+:1085E000147BB95F9A337AFB1C4B7A8D87522890A3
+:1085F000E879DD9887492EC5126F39A38837A35DC6
+:10860000A13F07A713B5FD7345DEFFAA20E674B2AC
+:10861000B47214E5412CE9A4E2CF83DECF97FF7951
+:10862000EC47DA68AEE3A399F2D442E093BF9C2E04
+:10863000DF83E596D723DBBBF3632F77D31E8072EE
+:10864000F104DF3723E9B37985B197FB4BD1BE48FD
+:10865000E1F645F8FCCB153D144B79D20465B31116
+:10866000D61F01FF8F8EC2FCCB7350EF727B81E56A
+:108670009EB9A40FB1DFE167B22EC43E067B141C85
+:1086800041B443053992DDED8DFD7E2D7D483F647B
+:10869000AFCC615C1FA8F32F2CE1F87A7A14E0B01C
+:1086A00000DEEA256EAF9BC2E050CBBF2D8CBD7DB6
+:1086B0002AE943E04805BB1FCB0542447BAFA7D066
+:1086C00018737E1A0B78D9E2608D91E4C9C9D8EF8E
+:1086D0004B9A0DCAAAE9CED328D7964B87E7605CA0
+:1086E000F9FBF81FE61BD279BE61A5C1E545FFAED7
+:1086F0004BB23BBC768C47ACA2FACA7CBB43AF52B0
+:108700003EB6DF947CDB056CD7517DE5EF241FDAA4
+:10871000C3DF17D69DC9C6F136EB1DFB18C69D9564
+:108720007C838DE71BAC369E9F106D3CEF60B529B6
+:1087300079071BCF3B586D4ADEC1C6F30E569B929C
+:1087400077B0F1BC83D5A6E41D6C3CEF60B5297908
+:10875000071BCF3B586D6ADEC1D33815E391369EB7
+:1087600077B0DA78DEC16AE379079897E71D6C3C49
+:10877000EF0070F1BC832D72DEC13A947720FFF1D7
+:108780001896A467B85F7F54A9CF067BDD34637861
+:108790005EB56AE7FE2D1817AB0972FC5539785E95
+:1087A000D914B4770A307E4566B0DF04FE65451102
+:1087B000C3F0D5B0F9C3F313DDD9E7BD02FAA3B016
+:1087C0009729BC03E529EA187F3F7CFE6171573B7E
+:1087D0008FE7D6657E8BF03BBB2C4878C3E71887C4
+:1087E000AD53F213B556ADFF2A7FE6B2F9715F992A
+:1087F000D49908F890456DBB88F92F8CBB5EF1D7F2
+:1088000061DCB76A501B7715331BD4B83CCF4B845F
+:10881000C139DFE11C5F046B6A017F2A01E6CFC129
+:10882000A415AE53127C5EA4B7DD1B88BEBC3B45CD
+:10883000C71468AA0464609EA512206A86D254C632
+:10884000ACD24CF29B389DFED7D4BDF1D9280F0392
+:108850007A46046C233CA8F9850458BF3483FC2B6A
+:10886000F2EF2A33FDBF473A50EB82CCF338825DFA
+:1088700062CD802FF96E265C3693ABCE906FEB45C0
+:10888000E635C37341E9379B05294E2D3389F276CE
+:10889000B5CC4165D174576911F0A3CEEC75E17A7E
+:1088A000AAEC6609F9853DEE3CDB48F1E47AE93251
+:1088B000E04900F6F862DA48768AC82EABF81C4523
+:1088C000BB481F2F7822C9AD8AD8EB61B2832A0A30
+:1088D00019C9C72D2CB2FC7CAC84CBCF374B5DDFE4
+:1088E000443CD7FB16D58F872E8FBED04A799B6D1F
+:1088F00061F1C25BFD8A626F4724E7903DB901E9EF
+:108900007AF1048F0DE18816C7782AF6F0EC491B3E
+:10891000C1AE7B7614EC5AD443B7EC2AFB9993FA98
+:10892000503BCAB10E4FBAD0EFBA929038AADDC30D
+:108930003C14678D1CAF796914E22099A8BF13FE1F
+:108940000B9D63EA3A02FB87E5FBBC54E1F88E42DB
+:1089500087E34B63CF17D3A0D4273E610B8D1B77E2
+:1089600059040E9741D0C0F5B962FFFDA024F678F6
+:108970002A81727DA9FC2EF261D574F96758AA7C10
+:108980003BDFE1BA40FC292DAA4F02F9BC667F7695
+:1089900001EA8906DB5EE32A80F7D552F9FD223A27
+:1089A0006FF41F5B1E6EB11E8F47BCF7B922CBA3BD
+:1089B000BB1109C5E44FDE28E2FEE467848728FE88
+:1089C000E4AF8B63BE2F7BEA7386FCC970FE1F5B2E
+:1089D000CCE39D6347018E06285746F1EBA68CC277
+:1089E000FC8D5ABF6EBF3E44CE104185E6696CDCFB
+:1089F000AF6311FC3D9735BABF377B14D6B110F386
+:108A000071B591F5DA7DC531F7AF967E03CA0733AC
+:108A10005BFDA9D0C4BC306FDA50BEB2C9D5AF0F70
+:108A20008D733F38E1E037E508707EB338E672F2C7
+:108A30007C9C1EF975BD19E1E96A067E8DB05F2543
+:108A400025DCFF9B3BE111968876633A43F711E4FE
+:108A500009CF3736297E6383A27F762A72D4532CBE
+:108A600052E92CE5F5B951E8FAD7CAFB8D4A9CB614
+:108A70005162F22B91F47FECE9E6FC3828E7C671ED
+:108A800038EF0DF3CFDF53F4C49ED8D3CF9E0CA0A4
+:108A900093B9B591F17530F674B17402CCBFD4F6C8
+:108AA000F41C90F8B02F9B0D945F9C2EBF580CEFD8
+:108AB0006D8BC2579F2B7869863E3AB0FB5BA03422
+:108AC00042F91090815440FAED55EC6F018E30144C
+:108AD0002004DEF1E8E7F43AE41E7CCE5C6DE47F2E
+:108AE00084C81BCA9F569939DF74A783FF88FE0E7E
+:108AF00033D33993AE20CF9F7665F2FC68383C6A59
+:108B0000FEF46F458F19CF71776516C485F2DDEBE2
+:108B10009B98266FDC7585E785C14F8AD3FA49C9D2
+:108B2000E427858F9F90B9745EA87F24C8DC1F025C
+:108B30007F26505C3CE417A9FECF987CF95CF17F5E
+:108B400002FD1DCD9F1147490F8B30073EFFDD749D
+:108B5000F9DF108F23D0D31FA3D0D39FB0DF7F3492
+:108B60007A62CC11B768CCF071BBB21EB7B58E700B
+:108B70003F2021D31991CE54FA027A9B503276E8E5
+:108B80007D21F3B44A6F134B8ABF3EBD5DC0BEF07A
+:108B9000EFACE1AFECD649D1FB9DB57ACC280FFA0A
+:108BA00032D79BF19EC4D4992E07CE6B11996C00DD
+:108BB00038BB5C3E339E7B003B2FBF6484BCC1CD81
+:108BC000222E3F7EADECFFDC099CFF2A960BBE7D7A
+:108BD000C07F4D6C9701F74D7DFF5849ECFD887BB8
+:108BE0007248EE35968C20F75E56F8E273055F2BDF
+:108BF000DAD629E7995844FB6755ECFD8C342B9461
+:108C00007352D745A4E35B7487E78522AC6714E20F
+:108C1000E0E7C7E4E03C4CCD2B6D40FC3E56C4F190
+:108C200017CDFE7D6A14FCB38900D74AF69901FD81
+:108C30006959FFC7AC48E7118E15D9399C069003D6
+:108C400080DF9559BAB731FCD995A4B587D4F767B9
+:108C50002BFEAE6714E467520ECEC3F11A7E0E4CA3
+:108C60002DCFC53E1EB0B488FBB9FF80FC0EFC734F
+:108C7000A8A458E3E7FEA864643FF7B57F8FDC1A29
+:108C800050E8A8CB11D99E7D21F6FB40E7E060DDDE
+:108C9000EF7C15B9116E6FAAE59ED8DB7B69597A16
+:108CA0009C87C3D1C8B4E7246EF1DF28E02D5D8F27
+:108CB000F368E97725E3FA5F85C3581AF3738CE705
+:108CC00067E831FFC3F9797DA92BBE94EC368F1983
+:108CD000F537D80714675FB939251FCD2AD8676BD8
+:108CE000A996BE934A47A6EFE4D23B40DFAA9CFC7C
+:108CF00017614C53A8BC99A8C89B69A5B1DFAF29DF
+:108D000018AF488E2CAF2B631FE7DB73774E747957
+:108D1000AC9E37FB47411B4F6EBD258F634E4769A5
+:108D2000A9FA2179ACEA87703C8D865E480CD10B9C
+:108D30000D51E4CC68C03136041FB59D02E5AF98F3
+:108D40008DF9A6C0AF9DD839E4DEC7965188134F80
+:108D50000F8D7FC860AF47A0E3DDA5B1CF7FA3BC77
+:108D6000E9377CDB36D2F947A3D5C5283F6273319A
+:108D70003BEC9FB1B395F2F6C605AD9487669D02B4
+:108D8000E5FD98F42EF979AB6CDEA7307D365C9E5C
+:108D90006C8D395E8B72D897F637C5287ECDEBF88F
+:108DA0004A3AF937AFA33C1524EE47B30DCC4EF742
+:108DB000A4AF7CB9FB582F2012302F9AC4E83E761E
+:108DC000A7E1C77ACC471B053EFE5CE6E7F94F9763
+:108DD00077FCA3F09EE5A0317F3B547F519A4DFB79
+:108DE000DE69E5CFBBF69BF39F84A59EB6159EC1B9
+:108DF000F3E153A727531CECC5038F6BECEC5ABC73
+:108E0000C7807EDF0B1E867EA229D33571243B9C52
+:108E1000317F92AE8C509AA8947A5EFA059D6DF8D7
+:108E2000FB3BF7F748E867BD78C04C727FEA819E4C
+:108E3000F85521E32796713EB6063DFE1900AF3581
+:108E4000D3733209EF1D2BF9739179CED4C22B6302
+:108E5000A4009D0FDF91576B0EA5BB2EA9D64C79B0
+:108E6000E45C9D638A1DEBFC1C43FCF4DAFD82404C
+:108E70007EDD2E1150EF9AE1BA867AEC0D89EBC3B4
+:108E8000A9536B49AB752AE71E76E42D3980EFC7ED
+:108E90004FAFA7F13B59647BCC58C6E5F08B0699E0
+:108EA000E67DF18048E7C855BCDE697CD6CB300F43
+:108EB000E0A3DEA6A77BD8A78D4E11E5D0E93481CB
+:108EC000ED822DDFE97885EE99EC8802EF2F4AB923
+:108ED0009FCA6CA9447FA7F7772E8F747E5FA5BFCA
+:108EE000C93364A90CEDC0499E2694FFCCB6E43684
+:108EF0007CF124DFBF4387E6CF03FCCF7DC17F2217
+:108F00000EF7216BCF785CF707A5766ABF450F1F78
+:108F1000BD42F4B0C5C8EFE37875718E03B08E859D
+:108F2000D60111CF4F18528394E76D2AE3F2748B68
+:108F3000CA0F63811FE03D7D06BF07C526DAA9CEB3
+:108F400026072784DEA39E55A6AC970532F1F9C209
+:108F5000F87737D81D8C15F6A6378BB0FE8589EFCC
+:108F60006EC8867A49EF785ECF78F7B36C89B1B274
+:108F7000DE0C5E9FF6EE6793A05ED19BC9EB953049
+:108F8000D478B09B7AB39ABD7938BEA419BF150FB7
+:108F900072147FFD526FD2458C5F3528EB871F031B
+:108FA000CEE3ECFB473AEFE2345BFD782E83C986D3
+:108FB000B0F8193485DC7760A90924FFD4FB0BF3E2
+:108FC000457F3FF6D799FD84DFBB5927D97380AD24
+:108FD000DD5F147E797B2E5CEE6DD9C85C784E8C9B
+:108FE000B16609EF33084CD67DC1E3784E9C5F85AE
+:108FF000479D7F185CB0B5C89F43703D4FE3A87094
+:109000005DCB377951DE7A6B59AE27044FD784E0B8
+:109010000F186C45DAAC1D0FE13E5D1B139C204020
+:109020003DB97C1BEDDBB5B1C11F088E90BA81EF55
+:10903000635B6F09ED639728B7219D9B8CD66E21EA
+:1090400091B1EEB884190CE6D931D6E5C57B6E40F6
+:109050007774EFD89B65741C0038EB8BB4F9A1C70B
+:10906000153AFB83220FE6987679CE015DBA7B0430
+:1090700086F770DC83378CA8FF16F65D3462BEA4D9
+:10908000A3E7A211E9BE03EB304EC7F3C688F96F20
+:1090900063B95EBD2F4AE791D64B1C4FA7B2EE7A5B
+:1090A0002A15E0E9582DD0BDBCF54792E6607D7DDC
+:1090B0002BAE92B1E55587E720B9B438FB9FC27259
+:1090C000251B38950A24B4CCA567F6103DB9624D2E
+:1090D0003CB387E8C9164F8AA6BE7217ECCE0C289F
+:1090E000376668FA31E5FEEA3236F483E7989A94F7
+:1090F0007D5C66DB19C0B8EE3297C13B1032DEC230
+:10910000BECD6232C2ED111C748DD2CBCF3FADE02B
+:109110002B84521C7A1FCFF7F40AC4EF1D6D7ABA64
+:10912000C7D3DCCBEDAEE63582CF2E201EF8BD0DC9
+:1091300077AF40EDEEDEA7EB9311EF1B000F00477A
+:10914000DAF8847D2C114793E9DCD54A055677DFA0
+:1091500039038EB3E23B02DD6755BF9BA0C2BFB2AD
+:10916000A991CE91017C5EA44F759D4DF647E95CB7
+:10917000D5CA89970DA887617D970634F8D4D65B48
+:109180003CDAFACA8DDAFAD132E59EF234360DF9BC
+:10919000E9789920E23924B5FE51D6F9B7F15EE7B6
+:1091A0006ED1790AE9B3CDE89F81FA7EB7E8A2BA19
+:1091B000DA0ECF3B18F19DF8E100F1B140FCB9C5E2
+:1091C000204B35F83D977681E87605B6ABF3670F0F
+:1091D000BD4F75FDF0FA4D55EE5A9C1BE8BB30476C
+:1091E0000509ED907A511693F3882F229E77F9BDE9
+:1091F000C2076FA3F603B8EE4222857DBAEBFE44A8
+:109200009F17E6BDEBCD563AE7765721D0811DF981
+:109210005E47E7D6E6E3792F28EF03796881F22EDF
+:10922000FDA12692EF338D12C977E59C972A2FE492
+:1092300017B5E7B6E6679E213BEBBEE776D279B578
+:10924000C93972C1D3A80F2D7CFE1D4704DF6618F3
+:10925000A723EF34C9CF71323F2FD76153E4682F72
+:10926000C85175FDB0BFE350AE612269411ECD9B70
+:109270006E56A95D263928F86B75E8FF8E53E6DD3A
+:109280005F6DA775A73D7A48C0756731EF6601E647
+:10929000BB823A7CEC50F955EDD7B5F80BE85D563A
+:1092A000AFB5635B45D7E365305FBB6DC0C8CF2DFD
+:1092B000068DA81FEEE0F8DE48E3C3F27574EE50A9
+:1092C000E2FB30473F988076CEFAA339E3D808F620
+:1092D0008DDEACD3C8118314A79137F373B5F26751
+:1092E000A1432B77BE5196A3695F244FD3B4DFDF30
+:1092F00058A8A93FE0ACD4BCFF60539DA66EB2CD88
+:10930000D3BC6FB12FD6D4E373976BDE1FE358A5A0
+:109310006937BDF5A32601ED71B377C00578E8067E
+:10932000DE284B1ED223D312E06528E30A2D562CEB
+:10933000BBF34D744EB67B3CE89744ECFF1D3A7787
+:10934000694E7CC95C03E5DF0BBE5AFC7E0EA0C9EA
+:1093500085F6DB3D4F68E3F0C7AB385FA96543B9DD
+:10936000EBC10A28F35EB067F07BE9817B707FCCAC
+:10937000718CDB45AF99C92E9A89765388BF71B03D
+:10938000BA667E39F67B42BE17F982F532690ABCAD
+:10939000B7CF083B8B7AEE3523F5CBEB1DD085E6B6
+:1093A000F77F59CEE5C1B3CEDA7B71FC8E3ED0B2E9
+:1093B000C84FCF7D6844BFAEA3AF3F01F5D90CE7DE
+:1093C0008746B4CF879E2B7A4E0CC6619CE31F0E56
+:1093D000E923DE63DD5E6EA4F14F2B72BDE53B7ABF
+:1093E0003A4F8BF7376B4A86E473CBE1A01FEF63EC
+:1093F000B7B4F37B9B788E36929C06F9FC61A8BCCF
+:109400007D361DF4C14C1A4FA30F9697F9E9DE3E45
+:10941000C86FCDFB2B97345CC57C25C871EDF34C30
+:109420007E1E96B10103FA7320D735ED1BCB95FB59
+:109430009CD358DE1720072E3823DFDB7DBB8A9FA5
+:1094400033B8E0AAA37D7816F089E7479F1D863FD1
+:109450008ED7DBE1ED65A48190FD1B66FF5771FFA0
+:10946000EAE52872FBA2B2BFFB8440010A55B7337C
+:109470008EE87785B975EDA542DC97CFB7A2BFDE40
+:10948000F22381EEC1FFB2FFAD343BACDF78F8547C
+:109490001ADE97761F3A9586F789DB0CF6CD68CFF2
+:1094A000037DD03DE48E5E3FC1DF7EA8B01F9FB735
+:1094B000F70A0E14C9EE9EEB0DB44E36B015FDA39F
+:1094C0007D51E03A58CEEDABC3E5762ADD2E9813F8
+:1094D000F57E8FC9E713901E403E215C47C00F8286
+:1094E000FABE6DE6A648F6D46505DF27B71919DE82
+:1094F000FB6D83FEB88ED359A78DF8BD8596C3B09A
+:109500002E01D771EE81781C7F8381A19DA1C2F7C6
+:109510007156E0035CFFFBAB0D0CCF2D6F59AD27EF
+:109520007CBFBF81DB27FA877FBD3503EACB802E66
+:10953000F13B0F2756DF389D01E3BEBF86DB69751F
+:109540000F1B882F97AD136EDD4B0EA56B956EFF2D
+:1095500046A1D370FA0DA7DB61F4BAE6EBD1EBDBE1
+:10956000E5B7EC9019A8F761FFE78C433AFA1E7350
+:109570001C407E1A3C611807704FDA2A39C0C36359
+:10958000D3F5BEA7D2506E9CE0EDF96D7B052E7F22
+:10959000ECCB717D19DD4686F7082E2AFB7651D972
+:1095A000373B0B0AF1C8CF626012CAA96C25CEF90D
+:1095B0008A81351D46FF52E4F267FA8F6D7BB787CB
+:1095C000D0EF7F2BE774ABCAC56946E63A6CC5F7A6
+:1095D0000F8D5F04E3BC6CE0E7352728E34DC90934
+:1095E000362C825257C1E5E46F1538D4FA9F143EE9
+:1095F00060277F43F85C68E6F89FB7D1DF8CEBF813
+:1096000099C975BD1CDE5F30E17C1BEABDEE493FA8
+:10961000C9E3DFB973901DEE56F07FA2FC37CF632C
+:10962000EECF32358EF6D772F46909E9D932A568E2
+:10963000DC48F130F7CD6CE64A01BABA9943A55A35
+:109640005F74FCAA7180FC82EB0DC42F37D3E9B99B
+:10965000DAEF5305EEE9468E07D6974A7A1BE4B651
+:109660005816926750F1A0FAE39629FB69BF1E5B7A
+:10967000C728EECFD8D3848F156DE7845618E741FD
+:10968000836CB002BECF2736ADBD3485B19F6C620E
+:10969000CC050B3ABBC9CC5C77037D6C92A81ED875
+:1096A00064A3FABB9BEC545EB638C7A2FE79E0A473
+:1096B000670AE2ED44D61E672DCC73EDAC81F04114
+:1096C0003B06F4FD98426B37FAF4CC0CED377A94F4
+:1096D000EFAD28F03F743383B940BEFC02E7838EC0
+:1096E000ED1B7F4672CFB1E67A03FA49F96D17B7E1
+:1096F00062DDBDF1770D685F7C00FA04E90CEC7E59
+:109700006613509E9C33DA810E9A6FA6D0382FEBE9
+:10971000820DC877DE630243FAFCA0F7BA711CD74A
+:1097200057742DE1F94D74E69F2DAD4822FCB8FB2E
+:10973000F2757C7F8B74A1F729FAEFF94302EE876B
+:1097400079A3FD9D4AEC7F46CF90AFB7D70613A40F
+:109750000872F8028C8B97A3701D5886B73719BD15
+:1097600053F03C419342C7E1ED8B15FA044C1B9436
+:10977000EF2932218D9F23C19F1658526232F94141
+:10978000FE38E0E796BEBAAB22961E817DA8F5CFE3
+:10979000D88721767C343AFCB2257E43E6C3294340
+:1097A00075F42343EF7FA01F19E9FB82A6ACC9E340
+:1097B000468A77B907C0BE83FDEA00C3C99E82F41A
+:1097C0003E8DCA4F8E74D9917FCC71C13DA82FD8E0
+:1097D0005D3AF23BDABD5A7BA841E18706C51E7AA5
+:1097E000B442EB3F819FD45EC1FDA484E34CE33FD0
+:1097F000853F27FFC98C7C05F34E83FD7925D2FE7A
+:1098000054D5AEC77E13D82EA27306748EF415BE3F
+:10981000CEBFA8E07A54E5EB65C8D748BFBD9CAF82
+:10982000C3C76DA9AAF90B1C775B947B10F757F19E
+:10983000F1DA9F13085FEEE752084F1FB3E79CB5BC
+:1098400040971F031CFB802EAF399DF149D0FF9A32
+:10985000CB199F6C1D92031DCFC553BF6D9317A7E6
+:10986000B442FD19A47B18EF93DE3A8A6F3EF41CD4
+:10987000E73F75BE0FFCCB52909F8A0D41A303DAE0
+:1098800033FB2E26A01D587CE4FE14E4C368706EE2
+:10989000AD54E0DCF8D8DA4B299C1EF01CEE5A459A
+:1098A000BFB99FF41B11FF6B3732A2DFFED77ED901
+:1098B000817CFC495FBC84FAF0E3A3F15E94FFD79E
+:1098C0008E997C3A81FC106F22C8B58F0D03F791F9
+:1098D000BD79442FA1FFE83EF6DB3DC88FEED74CA3
+:1098E00068F9B1B57D5DD751EFB5F5DD7B55C4F2B3
+:1098F000A5D1E587F68D8FD37AD5FA6F3799ED2804
+:10990000473F11B99C58DBFB2AD9BF6B076FCCC00E
+:1099100038EAC747FF4F09CA35F79B374A509EB907
+:10992000DFB85182EDEE1FC77B22D92D71B3F484CD
+:1099300057555F66BF276AE2451B14FAC8EEDCD5AF
+:109940003809F0577C6E8903F3B66A7BF1149D13D6
+:10995000DF2FFE797DCAC321FD3A0322E58D8ACE31
+:10996000D5C7AF0EA1CB47AA0C9AEF947DD5380F7F
+:10997000B6E2F72D6FC575023AFA0EECB680C8BF95
+:109980002FBB46F0A1BF01F64B783FB2A7AE3D9288
+:1099900042F71099E89C3FBD08EB531CDBED2856BD
+:1099A000CCA72687D84BCB023ABF09E8A8A9CFE4B9
+:1099B000277B3F205EA4BA62473D74FD3763B285C2
+:1099C00008719ADC77E7A01C0F8FD7C0CF18845B93
+:1099D000B5AFCEA7F3F851A647D22D04B89A3B995C
+:1099E00084781D16D7699A4BF1A2F0F88E3DB0DB52
+:1099F0008CFDEC937512C2ABDAA5B88F3D11E4C0B3
+:109A00005F567279A6F2576780E7F53A03B5E6C963
+:109A1000507E5769EF9174CC0B78E9ECBBFF00C620
+:109A2000173A071F8C9F0EF374BEB798619EE79A92
+:109A3000546B9E82FD06E79A1FC81BA29BF0F91A81
+:109A40002AB95D34642F44D67FA50A5F8F961E2CF9
+:109A5000ACFCF3D083E09F575472FF7C058F9F705E
+:109A6000FF3C5C7FA872591D77AD82EFE172F92A45
+:109A7000D939E047935C5E5B69A7F732FB16A59086
+:109A80007FFDDE9214BB75F8F839A243979C377CB2
+:109A90007CD59E737BE55366F47B643DF1A77B899F
+:109AA000E0C3FC976AFFB99D02D9E5EE66830FDF3C
+:109AB00053E10A2CE1F1D8076483CF220CD989AA9B
+:109AC0001D79ABDD2150BB6A57AAF663C0C9E3BB61
+:109AD0004B8A78FB658B6B55E5585CA7859E17977D
+:109AE000F3E78C394FA15FF5E05281911C50EC4AAD
+:109AF000954EC3EDCE4FFB7212478A433DAFD0A7C0
+:109B0000CA6713C2F843D563CF54707EEB403D5E05
+:109B1000887AFCF71AFB3C7C5CD0E38F57523F46B7
+:109B2000FD8B7E2E3A23F9EB6665FCADEAFE054E11
+:109B3000D620BC592CB019FDCC68FAF57B8A9D1350
+:109B4000ADFD19C57EBC1D3F1F56E4C868F1F3CBBF
+:109B500095B7F270FFA9F9F9967D688C62BF57D569
+:109B6000BC86FB1FA7F7046A90FFFE9781E2EEE137
+:109B7000EF3DA5FA9F22D3ECCFA92CA30EFD23F72E
+:109B80001A1E3FE84EB2BF437ECC5B7A86E3AC053B
+:109B90007F10EDB8476F2651D986F632942B5E3888
+:109BA00047F988156BB4F077634C17FBAFCBA6F37E
+:109BB000032DAC9EE24C2D7D49D216500ADD630F79
+:109BC0009D46BEF21ED0DB0F84BEFF88FABE99C749
+:109BD000E136A6FB28F71A660FB478C2ED7EAD7D9C
+:109BE00050A9C48DA2D9096FF45BB85C39A3273E94
+:109BF000EFC078D34CC68C7D5C2EB837F23849471D
+:109C0000DFE604FC086ABBD27E450C501C8AF26B6E
+:109C1000F0EAD5BEA7D3E83E97ACCD27B5EFFF3924
+:109C2000C9CBF0BC52720F974BEE36BD92472AA1BA
+:109C3000EF97B7833F390EED4BBBFD1B8877808BC9
+:109C4000F948DEC89AB8CB3E25AFF4E9997F253FA5
+:109C500074C5912879A4EE793C8FA47C2777781E6F
+:109C6000E9F4A90CFBEDF3481DBDE7E81ECBEDF2CE
+:109C700049A6AA5B711C8A3B4E14797C77629F20AF
+:109C800061BC6A621F5F77E9B638B2AF1B7EB53A36
+:109C900005E581BA4F9F2CE2F8FDE4FDCF6AB05F85
+:109CA000C9AF44C902EB7AE3FD0D3FCBE075BBD9E8
+:109CB0008EFD36C4A33FF3C9AFD6C7237EDF801223
+:109CC000F7E7C717C4C8F1C9A178756615C59D9592
+:109CD00078B508FA70CC505C27BCDF8B555C6E748D
+:109CE00083BB4271CD233CEFDF9DEE9A47F5BF9ECB
+:109CF000C4F8DF2990291EFD2AD035C68DA6C16281
+:109D0000312FFD3FE35827E691BAC7BA7E427CF473
+:109D1000D73A3BF211F4A7FC93F7B09DF423866A7F
+:109D200031CF33033F5B40F7315229DF738FB28F5E
+:109D3000E9E0CFA25F09D02CC13CF43425DF332306
+:109D40008E8938FE0E836BFB54CC2FF58B8ECDC4E1
+:109D5000048E143C6F199E7712649E2F57F34F6A3E
+:109D6000DE3C5AFE49C07994EF56F0F396B280F982
+:109D70007435CFC4963A29F9B5A5CC43F7427C8017
+:109D8000B3AF73DE6B84FCCFC31511F23FEB2B989E
+:109D9000629F69F38DDB735F213AFDAA79C6C378B0
+:109DA000AEE28EE6C5ECDC0F0D83BB28E9D334F2BE
+:109DB000BBFEF86F09A467FB6E903EBC1634B10081
+:109DC000C51F0778DCBDCF4071866BE0BF8D0DD11C
+:109DD000B3EF54F0718FF7D511FDF704EAE3F1FD0D
+:109DE000DF2BCFB7BDB7E47EB4F7BD01FE1D0BC6B8
+:109DF000B83FD613108BD16EB983FBF2646584F53E
+:109E000099E3B87E0AE7A35285FF4AAB389EEBDEA2
+:109E1000E77E987B03CFAF488A5C707B785EFD74E9
+:109E2000569AA0C6D3C745CABF1C0992DE687944BA
+:109E3000A0EFC97CD9FCCB33E991F3F12B7A2F4603
+:109E4000CEBF343690FC8C16CF0E8F63FF9D2AFF59
+:109E5000A6F338767A9544EB4EF6E4D78C6343EB61
+:109E6000BF83FBB07456847DB883E36F9C1DDBF128
+:109E7000EBCA633BFE13311E7F7B8CC7FF61796C9D
+:109E8000F3EBBA8AD8C2FFDB18C3DF1F09FEFF5706
+:109E9000CF0784E7FFC3CF0B849F0330BDF5B01716
+:109EA000DBBA849D413FC3EF8DBFD624801C149341
+:109EB000F6D37DCE05E53C1FB6ADDEECDB2B0C9D6D
+:109EC0001B50F1F56835F723A5BCEB5EFC5ED404AE
+:109ED00039509F82F1B272FE7743AE59785E8C8919
+:109EE000523AE6C9E0CDF4C56097745B22E7595356
+:109EF00095F1A2E99183D5358B6715E31F3D8A7CE7
+:109F00000EFF874A1C52EAE5F7E999684F5F4CF368
+:109F1000DAD3D11E4A3CC99F27F899BC97E0B267B3
+:109F20002FE67FDC201BE17B46C9FF26CFBB2B1B26
+:109F3000E3D2C96017625EF069CC0F923F2BD17BF0
+:109F4000EA7C9766713FEA190313309FEB9DCACFF5
+:109F500039B19EDF91FDA6E6F5CE1AFC975A05CAE7
+:109F6000EBB523FC3FD5F9F3F6652B440CF8CDEBAC
+:109F70009128DFF876F9DFE5BA681E9EE77B4CE2B0
+:109F8000AF9C40BF19E078EC6821D1EF8AE3E5FF90
+:109F9000D48CFEC76491F03CCCAF54E205179478A2
+:109FA000871A2F50F35BFFACC4493EC0F80B9403F3
+:109FB000180F8172FB2CDD9DD64FDB6745E0FF67F4
+:109FC000041E1FF2FE94C7870A8D8E9CD0F3947FE7
+:109FD000358BEF63AB9FE72FD478CF0F95F5147EC9
+:109FE0004FEFC7EFA1156E9D6E443D5FB8352B0E48
+:109FF000CB19B24F9706F85EB6FAB04EDDBF487483
+:10A00000B45759E7B63341CAEFBD1A96F7BF348B40
+:10A010009F6768A9E6FB7B09FFA018D41F9B226EEF
+:10A0200041F331B14AD247CA2BB5805F8C70B67606
+:10A0300073B8557CB7F8ED7538CFC553C1AD581618
+:10A04000ACC9AEA3B87BDBF5AD68BFB9076F9CAEFA
+:10A05000A67899D18EFEC44303DAB8DB13D53CFE53
+:10A06000FE2A1AE088B77B45F28F0BEF15897E92A6
+:10A070005B2CE4BF261B98DE8AF545DC2E2A684C53
+:10A08000ADC33A5B9244F660C1197BD2C379437188
+:10A09000B0E47B378C453CDD2ECFAAC6D32E5BE4E3
+:10A0A000E3B89F5F35CFDA7EF63D3A6FAAAE4BC577
+:10A0B0008B9A2F8D966755CF3DB81B3FD39CD3709D
+:10A0C0008BC1068C3F161EBD6854CE5F4AB6ECA10C
+:10A0D0003C6CE191EB947F55F3AD6ECF75B2ABA1C3
+:10A0E0009F11FBF76CE2F9D7D7000E2C7B61DDB234
+:10A0F00009EFA1DBA8EC8375E3F3639B72A9F46F0E
+:10A100007250797C531995F899C9F464CCDB5EA739
+:10A11000BCEDD559C3CE4D525E6FB7E8FC08F115C2
+:10A1200092F7A37A78DE4F1FC7E335EE3306FABE07
+:10A13000A1FBAC99E4774D5FEB44F40F3E3FE79A07
+:10A1400088707760DE2D842E3E911D9624F4839DC9
+:10A150000E0BE6DB0AFBAF1AF13C4C871830623C71
+:10A160000C20CFC0238BEE9EEBFCDC6F5F8D05F1E6
+:10A170007BDBFC58EFFFCF8F7D95FC5877353F2771
+:10A18000ADCA9102A74EDE8BE519D9F270889CD832
+:10A19000E6E4F9946D9327111FEE764E4A5A1D326C
+:10A1A0005E67238F5F24DF3BD912FAFC97D53C1FF3
+:10A1B000962C306724795633FBEBDDC71B416ED7F5
+:10A1C00044B2FB3FF929D0E54CA08B23DF9E3890A9
+:10A1D000C7193F341EB7AD71F5C431289F2E98D8EA
+:10A1E000141EAFD3C4E358585E2E5A5C6E45A34E7E
+:10A1F000B6D079A1E004D4DBE1F13326062770BDA7
+:10A200002E67E0BD1498318395B161F9B95F30DFF5
+:10A21000CF27C3FBCB1A75A42FD43C5D41A3C8360E
+:10A22000017D166C34F8283FD7285EA476C56FEC04
+:10A23000940A3290CE3F386B9430AE161E1F7334A2
+:10A24000EEEF9E04FD1D6D02DD0BBA5D1E4F3D0756
+:10A25000DED2DB3F07E36DF96C57773DF4CF9FAC5F
+:10A2600093F0FCF4F07C1E3FFF5DA0D839E171361D
+:10A27000A433B44BC2E3F01B153AD8389BEBADD7EF
+:10A28000147F531D47ED174E3F3F9DCDF56DB4B87C
+:10A29000FE5165BCCEC6826D93717F17E818EA93B4
+:10A2A000CEC65AF3E490F176CCE6E7DB9EC1FC60C3
+:10A2B0006A687E90E701C3F382AA9C2BECFF7D03C2
+:10A2C000E27B37C86BD4636E1BCF1F141EAB398380
+:10A2D0007263084EAEB777C39E07C8BE732431BE03
+:10A2E0002EFA7B45DEA302C5E70A167C763C1EEA01
+:10A2F000CC9944F7B0DC67276FB1A23C5A2016E333
+:10A30000BD1EB753B89567C27CD2FDEFACA1EFBCC0
+:10A31000163E907F0EF7E58166039D0F54F5DEFD36
+:10A32000EF3435F0F6BD4FC6617BAEE0B0D8F179C1
+:10A33000237D3F76FE4B7EFABB580B113A90E781A6
+:10A34000B39744E49BCB16D7DF231F152E52F24C54
+:10A35000CD5C4F3FD0B7C8C0C8CED3EACD13599F0C
+:10A36000533CE8465F21E58F52F0FC43DE90BE2966
+:10A370003C0A7A6CCC9DD3633F9D2D113E67821EB3
+:10A3800043789217F13C7DF8FEEF50F63F9A5E8AD3
+:10A39000268751FFF0FB63DE0CC1365C8FDB31EEAC
+:10A3A000538AF63A94E3A2D3DF1F6671BA4E8A62EB
+:10A3B000CFFD49A1DFA8E7A77A4727CFF487D97F48
+:10A3C0001E7963D5FF52F34DAABFF6A0620FAB65AD
+:10A3D0009352FEBBEF37A0728D78BF2139F2FD8614
+:10A3E000870E0968A7A8F71B4E1959CDE1543C4FB9
+:10A3F000ABDC77F22D223BE9D4DFFC62EB8BA97852
+:10A40000DF4990501DB51F3A477ABE1DEC23B2A715
+:10A41000FA7ECBE3AD87F8F9F0F6DEC8DFDDDBAD21
+:10A42000D8DFF53223B9D1AE9CB76DE851F244B70D
+:10A43000E2968F8BA1714BB73D30563DC7EB237F22
+:10A440004F1BC78C16B7EC60413AB7DBB14670A022
+:10A450007EB8DD39DC5DCA79DDA8714C79E473B969
+:10A46000E1714CB95A9BC7B96F96C4F7DB250868F0
+:10A47000EF9A75CE363AB77F4C90229DF35E5ACD57
+:10A48000E5F47C250F72D0C8E9E3608540F76FF0F2
+:10A490001E1EEEFBC163FC1ECEC1027E0F47CD7BAC
+:10A4A000A8F76BA60EE53DE8FE9D7A2F47BD67C372
+:10A4B000988FE05AF45C1C7DC76B87E1908DDBBD03
+:10A4C0005E7E3F1A6510E6434DCC13895F6BAB6B24
+:10A4D000C46A7AEF8EDB4F8F5447F07B7D8A1FE989
+:10A4E000AE8EEA2FACAFD6FA0B540FF717EE54DE50
+:10A4F000E38BD9EC4EFBFB87631C8F9E323BB6F19E
+:10A50000C4EC48FBB6C5A2FD1EAF5A5E56E4DFB0F0
+:10A51000EFC50DBB2FC9F57AB760FFA74ACAA71BC5
+:10A52000289FAECAD5EE317CFC1F29E3A9654029DE
+:10A53000BBA37CD7F9974ABCAC4B947B10EE692F38
+:10A5400068E397D30F69E397337B9335F57CFF7806
+:10A55000CDFB85672669DA8B03F768DA4B2F146821
+:10A56000EAE503159AF72BAFD46AEAB382DAF86505
+:10A57000F5CDC561F7387DB4BE1AA0DCD07E75E696
+:10A580006F6ADECB58A35D579647BBAE891BB5EB10
+:10A5900052C7CDF66AD797D3AD5D5F32E6E3F2BE20
+:10A5A0007E3E2E7FB65DC9C7E558B0DF338D932D53
+:10A5B00068B7A9F7A9D5F7FE2F376658DF407F00A7
+:10A5C00000000000000000001F8B080000000000D9
+:10A5D00000FFB3E46660F8510FC17BB918186E72C2
+:10A5E00021F84301CF6786D06A2C0C0C1A40CCC6E8
+:10A5F000C4C0C0CE44BC7E714E047B1D0703C34C57
+:10A6000020DEC831F0FE1A487C9D877E76A9F34291
+:10A610006859C181F73708570A3130B40A3330C45A
+:10A620008840F80CA2A8F2554208B6A924657639EC
+:10A6300002F5030024CC7134800300000000000008
+:10A6400000000000000000001F8B08000000000058
+:10A6500000FFE57D0B7854D5B5F03E731E3393793A
+:10A6600064F2200F02F18400A242180284870827B6
+:10A6700021C4A8018380BC54263C43483211A8BFA2
+:10A680006DBD77260411ADB551691BBCE81D1014D2
+:10A690001575A0D1061CE84014B1DADBA8F8A8D5DE
+:10A6A0007650444048C2CB8B2DD57FAFB5CF49E61D
+:10A6B0009C4C48D4F6BFFFFFFDF1F3DBECB3CFD9E0
+:10A6C0007BEDF5DA6BADBDF61EC1329A244E22E465
+:10A6D0005BF8A365842784F4E92CDB0ADA8F9164A4
+:10A6E00042FC2F8BF2368E10EE778EF0A45184BC94
+:10A6F000B5990B98693DBCCF4608AD9FDE343D60EF
+:10A70000CE2264FF08B302EF9FDE9A8FF5C92FBDFA
+:10A71000E714687BD54BBC0075D3BE13CE889D1063
+:10A72000AFB9E5A16BE9F3F69778B2850E45FC93D6
+:10A730004D2485906316C2FE2EB2FA522BAB566D95
+:10A74000DE7F07F45BDE642656DA4FD5EE65D3AEC6
+:10A75000A5F565874402AF546DAB95FAD2FAF200C5
+:10A760001784FA9A7D7FC671DA0A48797028212702
+:10A770007D16225F49EBCE969459F47945606711B6
+:10A78000BC5FB183739BE8FB159BF67F0CFD5734D0
+:10A790008A0379DAFF8AED36220F61637F4B601EF0
+:10A7A0004BA601BC556F88C44CEBE5975649047025
+:10A7B00024D44BA50E18FF614976C03887701C0D54
+:10A7C0009F55CFD071E877D52F706E985AB589789C
+:10A7D000009ED6DDD6394FDA615EB5D260F87EF7DD
+:10A7E0007D12BCB72C50F6B25506F8364B4500E743
+:10A7F000A6CDD2D2A19DFDADD8FEA60EAE630DD9D9
+:10A80000A99EA8766379D247886CEEAC5710A20453
+:10A81000ED0077409A3EACF3F9792E8190D1D03F8C
+:10A820004F644B67FF9430C807FEF7E83F810FF68F
+:10A830003A02DBB23AE9B5D245FF2D77D2EBAC4B09
+:10A84000A59FD09E17DDBF563E0474A0F0D4FB5CDC
+:10A85000583EE24BC372834F46BCFDCA3704CB0659
+:10A860009F1B9F3FE61B8BE5269F82E513BE622C54
+:10A8700003BE527C6F8B6F0E965B7D1E7CFE94AF89
+:10A880001CCBEDBE1A7CFEACEF6E2C77F8FCF8FC0E
+:10A8900005DF7A2C83BE7A2C77F91AB06CF405F0B8
+:10A8A000BD977DDBB16CF205F1F91E5F1396215F58
+:10A8B00018CB7D405F5A867D2D581EF07D88E5AB14
+:10A8C000BE087E77D0771CCB0755BC3B27907C8198
+:10A8D000E2CDA9101715179258A2E48BB49E58CA5E
+:10A8E000EA29B7F9F3255A4FF1D03AC563DFCA70A8
+:10A8F000BE99D6FBD6B0F6CC7B488185D633FDAC6D
+:10A900007DC0834A8195D607D4B3F6C19BFC0571FF
+:10A91000B43E38C0DAAFDE112EB0D1FAD541D69EA2
+:10A92000132293EDB49E1366F5DCB794C90E5ACF8B
+:10A930006D61F5BC8FFD939DB49E1761DF8F3F1550
+:10A940009E1C4FEBE3DB59FBC44BA4D045EB130932
+:10A9500087F5027B7E6102AD17B858BDA85F9920CC
+:10A96000C7E0BF7D626411A1BCB0DD7FB322A4D378
+:10A97000BA145945DC149FFE39580F8B6431B4BFAB
+:10A98000E52F538471B42E91D5D0FE177F05B61FE5
+:10A9900010656C6FF7AFC2F603928CEDA6DA7BB050
+:10A9A000FEAAA8607B72EDBDF8FEAB9282ED836BD0
+:10A9B0001FC2FA41D183ED636B7F8DEF1F943CD8AA
+:10A9C000FEC8DA805248EBFFC179B6005FD7719EAE
+:10A9D00072920DFC1A4C2BA5FCBA8E2373403E1EBE
+:10A9E00000A6A6F2B02E5D5240BFEDFB47DE933CC1
+:10A9F000A7F27632D4973EF54016F6F31CF623D232
+:10AA00007EF89EFB99F8CD585D3F13BF29D7FA69B0
+:10AA100084F7EAACBDEB67DF37E3F5F07C53A1F5D3
+:10AA2000B317FB71F46E5E13BF9DA087E7DB4AADE1
+:10AA30009F83D84F42EFE0098B6374FD84C5655A4C
+:10AA40003F7FC47EFAF40E1E451AA7EB4791966B22
+:10AA5000FD7C88FDA4F7AE9FB074AD1E1E6985D63F
+:10AA6000CF11ECA77FEFE6A598AFD3C363AED2FAC0
+:10AA7000398974CFEA5D3F071C7AFC1C7074E0E7EB
+:10AA80001CC233A877F32A70EAF153E0ECC0CF255B
+:10AA9000ECE7AADEF573C0A9C7CF0167077E440EB5
+:10AAA000E635AC77F32A88D7E3A720BE033F4E0EE6
+:10AAB000E019D13B785EEDA3C7CFAB7D3AF0938A26
+:10AAC000F08CEE1D3C85297AFC14A674E04746788C
+:10AAD000C6F5AE9F5753F4F87935A5033F57613F4C
+:10AAE000D7F56E5E85A97AFC14A676E02717FBC918
+:10AAF000F76C477808EDC7D17D3F07FBEBF173B0EA
+:10AB00007F077EAEC57EA6D07EB27BEEA728538F90
+:10AB10009FA2CC0EFC14229E6FE85D3F0733F5F830
+:10AB20003998D9819FA9D8CFD4DECDABE80A3D7E34
+:10AB30008AAE60F899248CC07586AE9D6E9E7E723A
+:10AB40007DBF7C85A3EFF32E56E75D6E02760FAFD7
+:10AB5000D933A445E1E9FBF61D09B90F9068BBA6FE
+:10AB6000E076C08F835A79D1764DFCD8389D1D95FB
+:10AB7000A024EAEA49C57D75EFF7291DA06B4F9D1A
+:10AB800073B5AE3DDD93ABAB67948FD7BDDFBFA68A
+:10AB90004057BFE2EE1B75EF67F96FD1D5B3D7CF42
+:10ABA000D3BD3FA87EA1AEFDCA860A5DFB55819547
+:10ABB000BAFA35DB7FA27B7F58708DAE7D78D303E8
+:10ABC000BAF611E14774F591871ED3BD3FBA658B84
+:10ABD000AE7DCC87CFEADAC74576E9EAD71EDFA398
+:10ABE0007BFFBAF603BAFAA48BBFD7BD9F4FDED561
+:10ABF000DBDB963FEBDE9FE2FA4CD77E7DDA9706F1
+:10AC00003BD5EE3A768D5AE741AE08FA25FE740937
+:10AC1000EDD5B043C2BAD4D7CEFC14C752F928E55B
+:10AC20001FE9C0223919F992FE51BB21BF6FF99576
+:10AC300011FAFCAEF19E2B5DF4F95D9267B82B869C
+:10AC40007D43F98D236950CA26288DEDF7898CDF65
+:10AC50000B322E0D3E42BFF79ADA0727D0FA703E2C
+:10AC60003F08F2F1326742BB3A8E2735F05E9C997D
+:10AC7000A0DF745F56DE93FE287958DF9FDA195CF7
+:10AC800067BFEB454F1ADA51B59FF8C1CE59D79F30
+:10AC9000CEAB2F21AF709F84FD03E9F7FD97A67916
+:10ACA000687F6689FA19D1E34B74FCA1387E18E4F9
+:10ACB000E1208C3FBAEBF8E6016375E35B32CB75BC
+:10ACC000E35B243ABE8B90DFD77EAE8E4F89309EF9
+:10ACD0009037B9CF717C7366398E7F9F44FDAEE8A3
+:10ACE000F1E33AC66F81F9BFDFDDFC078CD7CF3FB8
+:10ACF000B3423F7F89CDFFA3DAD3EAF87138FF3F33
+:10AD000073A7D9FC332BD8FCCDACDF8EF19D1DF899
+:10AD10008FC0F8C7BA19DF9C3D413FFF2B2AF5F3DE
+:10AD200037B3F14FD65E50C7B7E3F85F7217D8FC60
+:10AD3000AFA8C4F125B3C70DFC2365C4D504E8F85A
+:10AD4000A41F557CA9C02E741C28872452A12164FD
+:10AD50001B3700E1B82B8EF1DB577194DF509FF960
+:10AD6000F1390950CD9947FD4695D757ECC8974022
+:10AD7000EF613BF5B796A8A02E6EE291BFC90673AE
+:10AD8000601085B7B589F7437DF186EB02A05FBD02
+:10AD900066B2A014BE1348189E7FFECB615BA2E78B
+:10ADA000652C97D48BC72251F2D6E1071690213536
+:10ADB00014BE29C004A33BEB9F523F0E1CE38FA996
+:10ADC000DF43A8FFF399C8C6FB0BF5F7A01EA1FE51
+:10ADD0001E3ACEA416BFA3DD1D4EA3F097AAF07FA6
+:10ADE0002A3079FDF4362EE0A7F2F9D58F47A07FFF
+:10ADF000BDE06E1B457A271C65FE245D9DCECB0F02
+:10AE0000746ADF6D0E6CE110BF32E06B3A8A262166
+:10AE10008BD667505C77BEFFC1BEA907392721B723
+:10AE200012454CA5EFDFBE9AEBEFA2E3CE52CCB9B0
+:10AE30006C1D52324C28D724C33496905B1A478835
+:10AE4000B407325D113F8D448D3BA3585F9F55AAD7
+:10AE5000AFB78A8A68A270B54EE7C866DAEFEC39F8
+:10AE6000FA766D9C81A644466775BC528A9374FA43
+:10AE7000683694B9F0D885749EE362DF6AF078177B
+:10AE800089248C7EBCBF0F01BAFA93F1BD792E36AE
+:10AE90006F23BC73448B524AE739A78C0F007F1B8A
+:10AEA000E1FF689F4D31E5D072FDA32231759D8F82
+:10AEB00011FEB91EE37C8222ACF3F3CB8DCF19DFF8
+:10AEC0001C53E9FF29F0072DBF00FEA0F01F55F924
+:10AED000A353AF32FEF09A3DD3801FDA37F204E974
+:10AEE000AAF2CBAD2ABF2CA9D7F305211E11E8B8D1
+:10AEF0006C0E97FB40141FCC56F96059839E6F6E01
+:10AF0000277E313D065DE66ED87C6F9ADC757E9FAC
+:10AF1000A87C33FFC1FD889FAEF36474BA43A5D308
+:10AF2000ED35FAF65B55BADEAED2754EC3C3AF51FE
+:10AF3000F541E6C90111E4DDFB538D9E111D3D3D38
+:10AF40002A3D8D70DEA1D2F38E1F337A1AE18DA8CF
+:10AF5000F48C349C13C980AEF01AE15B707797F9DA
+:10AF6000605CABCC1F9B9EDEA6FC5547A39E57059D
+:10AF70006F5875344ACE566C9FAEAB2F0FCCD5BDF3
+:10AF8000BFACA14CD7BEA47EB9AE7DD1FA3B75F55E
+:10AF900032FF8F75EF2FB8BB56D77E7BCDFDBAF64B
+:10AFA000F9E50FEBEA733D1B75EFCF9EB359D73E22
+:10AFB000ABF4195DFB8CE29DBAFA7465B7EE7DD3F4
+:10AFC000BEAB6E06FE7CEB3D9E803D71C1FD05C6AD
+:10AFD000332FB84537BC73D427235F1FF30DC1F25D
+:10AFE000B8CF8D7C7FD23716CBD6A6663BAC137418
+:10AFF0005D5C4A12086932CDAB5DDF0FD66982EB2A
+:10B0000069C8E4A9F5D37AB34946792869904878A4
+:10B0100024211C2C362A1CED7C547BA487F606AA1E
+:10B02000F893BAB69744623FF73E527605F06577DB
+:10B03000EB03FDCB00BBA74DB5EB8DED951C298D2A
+:10B040007E4EC81A84C36A627647A5C4E4BF7257AD
+:10B050007A0171423D3CB8E672E3052993A7029F4D
+:10B0600064EBE47859C3353AFD4E209ADC07F86D5D
+:10B07000A4EEF98AEDD7EABE3BB59F47B8AB41577E
+:10B080008C8365B1F43313E8E17073E68C6100A73B
+:10B090007214EB4D7DD02E3CE52B5E757410D0AF55
+:10B0A00014CBE3BE39581EF379B03CEA2BC7F253F8
+:10B0B0005F0D9611DFDD58FEC5E7C7F263DF7A2C1E
+:10B0C0003FF2D563F9A1AF01CBF77D012C0FFBB6A1
+:10B0D00063F98E2F88658BAF09CB569F82A52677A3
+:10B0E0003DF1DD71751D3E09FC1783CFA43A7FED5C
+:10B0F000FA099D7C16C7DF877CA6E1B9A4C1ACF232
+:10B10000438A8E1F12C097433EEBA1BD4154F9B054
+:10B11000BBEF63B77BB7FC6BF86DEA0FE4B74E7E0D
+:10B12000CA30F053764FFC348C8FE2A7A92617B3B0
+:10B130007B547EFA19CC23865F310F8C903E51F6FA
+:10B140009A926F82756CA5BA0F421F60FDAC3A7679
+:10B150001D7DB705EDBAC0105837CE0EF9DB60D8AB
+:10B160004738FB21257E56F7F333F249F77857D05D
+:10B17000BF591AA0444FEADA6E8D6378B59A483108
+:10B18000A1EBDAFD839E722F1C8A758124C2F70120
+:10B19000F774478C7EA9AD0CF8ED09AF758EAF72D0
+:10B1A000A0BF638FFD3D0FCAA926662FC735F36880
+:10B1B000B793F0936EC06FC7BA6476A741BCBD7DEC
+:10B1C00090E442BB814CD6E3CF5FA0C3DFFD1447C0
+:10B1D0002DB8EED6A721FE067E3538BD17F8EB490F
+:10B1E000BFF784CF8530EF7F013E7BD28F3DE945AD
+:10B1F000A2C82F34D1F9B7ED1B96FB800CE35E1E7D
+:10B20000DFDAFE9A119E5F7E473E6E4BD1F8B8257D
+:10B2100093801FA4CACBD9C62BE3812E1DFDF44019
+:10B220004FEE779F6482FF7E3A4BDFDF7DC6FEE202
+:10B2300025C20DA7E33A2489C453BF92F76CE3D12A
+:10B240009F7147FC1037D86773D7C9E0379EFCAFB2
+:10B25000B00C3DEBE30B670F3DE9043F6C651A5FF3
+:10B260007334061DB5B22A9855638FF6579AF4F5D4
+:10B27000B3F55C7110E725C7CF1C06EB8CABE6A8D5
+:10B28000087A3F0D4BAD9F9569128E73727B763CA9
+:10B29000F3FF024C9FEC48407D73D267C1F7FFD9A2
+:10B2A000F074D78F060F218DE4330BE873DA96DD47
+:10B2B000FDFBDDCA83705E82F82909895F81BF6961
+:10B2C000A5FF7F3B00FA15B0AEF5EB0DF27EF370F3
+:10B2D00078BE43371EFD4ED6F68CE1BBEEE54E2020
+:10B2E000C734BEA7F4FBABBABFBD62BBB5466FC7E0
+:10B2F00026E8EADEA6F41A9D5D0BFF00C3BD8613A7
+:10B300006009AB54D9B04DB0AF077EDA03C149F044
+:10B310005F38F65E9525227964149716E0D385632D
+:10B3200035FE9767FF99EAA9136F8A04E48C5CA243
+:10B3300050E5A9AE20F29B8998687D91FAF6C2C6C5
+:10B340001525B06E9D78F926F44316935227F8C759
+:10B35000E5A43E0FE2B5A789A918E4F33479C7390B
+:10B36000324A1EAD82849D2E5AAFB7E3A97FAFABA0
+:10B370002F6BD0D797925B5260DF7EE9069104383D
+:10B38000D01BFAF6AF7917F6BB8CD4AC8375FB579C
+:10B390006ABC6BA18B0819546F55FDF6F1BC320ADB
+:10B3A000874B6071166D1F7A7922F37F2A66062417
+:10B3B00085BEFF59E3C85BA906A2DF07D6C17EBCE4
+:10B3C0007F3A716F235DE9F75DE137C2ABD9035D69
+:10B3D000F6C3553892B7734A20861ECB14382667B9
+:10B3E000AABE2B105CBAB8C73443FD7BF35332D1ED
+:10B3F000F1D31EDE93278C66FC03FCC009ED92E7B7
+:10B4000087F49FD6A5FF827F6AFFFD68FF79BAFEA9
+:10B41000A7FD53FB1FD805FE79B1FAAFFAEDF32F64
+:10B42000FBA93EA978F1974E42D7C913427D8A9B6A
+:10B43000D2B572DBBD4E8596C705BF13F8F54480C3
+:10B440002F8E45EF87054E1542C5CE41DC0DFE49D6
+:10B45000FB3FF9ECCF301EF1D536D185F1B4EDE6E6
+:10B46000B099CA6175E3F2129283F523AC7EDF19BD
+:10B470001EEA4D7AFEAB78FA9729901F4239458D26
+:10B480002F85D19EADDEFA7911AC4F5ED28E7264FB
+:10B49000FC0EC6BF9888FAAF4C8AEFDA4EE1C4388A
+:10B4A0008157C58BB7F16767782794377C01FA829B
+:10B4B0007A22E8C71BBF2B57EDD4358223F9988D2C
+:10B4C000FE7B0C19037A51C30B09303BB5EE995F33
+:10B4D000E71CA1709DDAFAA6938BC297264F67836B
+:10B4E0008BFE738FDCBDDE6DA5F2166D0F69EB96DA
+:10B4F000DCA4DAD72156568A6127E4F3546E16DDB0
+:10B500007EFAB8F2F9279F7A0CE2997F32BB07D115
+:10B51000FE573CFFDAFBE3697DC54E31B9844DC36C
+:10B52000CEA574D2C74BFFBF3BB7931E15BF794D55
+:10B530009287B1E7F72476D265C5CEFD1219D615EC
+:10B540001F9383FBA5883D067D82478AC05EA87B4A
+:10B55000E6BF2588339ED8C791D4AC18F8DCFC1A16
+:10B56000DA038027A4A74AAF0EFA19DEF752BA8091
+:10B57000DE36D2CBF8DE2255BF40BF906741F9FBE3
+:10B58000853D9007F591D90D78287F619513E6F3F5
+:10B590008550C3F8FCF17B53409F958BFE141796A2
+:10B5A000EC79F9133F42FE5BF6F68F5230BE4494BD
+:10B5B0007413AE45FE7498E7924DB3709E4B8907A5
+:10B5C000F9B0FC71BE3440CB0B0229DE19434EACFE
+:10B5D0002293932FB650E2D2797E01FE24E8EF77D2
+:10B5E000F8C036B4BBEF24A00F7EA4CE855A0C5809
+:10B5F000BF6061F4FAABBA2E10B03EA3F977EB7DD1
+:10B600002D40A793FD9554D877F112C1AFE283FB8B
+:10B6100096F6CBBF3D2595D189C8429EFA1D5DF7B0
+:10B6200027C37378BF4554AC39BAEFC8B7599DE307
+:10B63000AF56C7A770C7C17AFD454A6CFB354FD4DA
+:10B64000F4005DB7A3F82C4ADE99FC6FBD9FC9BB1F
+:10B6500026FF81E9C5D07EFE309323F80ED6430A3B
+:10B66000573815DBF7CFE4503F503F3A969C6F15A3
+:10B670005539D7B71BF985C22F70F1517C03E324EC
+:10B68000221D70DF65E906FA7D941EF5C2B8CEAEC4
+:10B69000FD6A72BC4CF35B45BD3E209B981EE8DE04
+:10B6A000AEF2239E2AC5C0538F81FC5279F5CB2080
+:10B6B000BF6229CCFFCB1DCDEFCFA372FB655093AA
+:10B6C0005BBD5E35CA6DF9AED12496DC7E69779399
+:10B6D00098724B9FC7945B7B04F9F9FFB45ED5F079
+:10B6E000380CF0784D271E353DD91D3E8D7AF290ED
+:10B6F00020235E8D7A92FE1D26795DF951E3438DFC
+:10B70000FF2A9EABBA02F451079F6A7CD8C1A71AE0
+:10B710001F7689EFEAF0686CBF00FB3414AEF9962F
+:10B720008DD38E5257D2D24E70DF267F268FFBAA42
+:10B7300096F384E5811011F3433F30D58C063B75B9
+:10B74000E2DF6F3D7D1785773EF18B2C2FA05E44A5
+:10B75000BBFFD2B7DF4EA0F399A7E2793E45FB5479
+:10B760004A973902178EA370CE15883F3E11E2B773
+:10B770001CF9340A8EF9E5FA3AFC4D4CE9ECA7A71E
+:10B78000F7BFAB9FF27DCBB7295D3F1D44C8BB50CF
+:10B790008A38BC10CD57D381AE147FDE515C600077
+:10B7A000EAA988501AE577BD2032FBF3EDC219A350
+:10B7B000C1BEC99F3D2C9EF1FB60F47BBDAA3E3B00
+:10B7C000EB97E341CF9F0D65A37F7BF6D02247AC7B
+:10B7D000BCD06695CF5E53F75DDAEC5C3D4FF9BFA8
+:10B7E0008DB4A37DE3B75BC9B618FB821B454D5FE3
+:10B7F000AB74A37F3C1D7F8ECA8773E9A7F1B95153
+:10B80000749B39F584E0EC4A07F8FB34CA0FFBA1BE
+:10B81000F805BE06FC365B2345A531E279CFA9F8D1
+:10B820009B78E06BCCCF2D0CE50B80C7423BAF8BF8
+:10B83000833CA9C9EB503214E09A7860F9CF4753A2
+:10B840003EF61EE2DD908FEB0D9D913C31FC6123B5
+:10B850003EA17FB0338F882EC4D77B62E912C0EB44
+:10B860007BB3AC04F635DF95DC55B1E02C33B3F592
+:10B87000662E29BD308AFBBF0FBFF9B31DE1028AD6
+:10B880008FB37696F7DD95FF98DC9F7571815A0E20
+:10B89000F89067F5642E0071B422E2F9F9040EE520
+:10B8A0007D52B4FECA6F9AFE3CE4F55487389789FE
+:10B8B000B6570B1109F8D8DBB45300FBFD269928C5
+:10B8C000188F106A86CD8C8A7B1D1105C457F3DF53
+:10B8D000E6DD0EF83D37D34C002E65E81927D80178
+:10B8E000E74223510EBA9BD71F7C645AA108FD1072
+:10B8F000E40F233F1425DB74F55993493F37A5DB4B
+:10B90000447364953B06FDEA24C667BDD66F96FF77
+:10B91000CFF4DB04AADF185F8BD1FAED2689F17D25
+:10B92000947E4B8DA5DF56D6CAA9C0172BF766A704
+:10B93000025D57BEB1A44F2CFDF6BA8FF9F76FA880
+:10B9400079E66DFDA87E1B1EA5DFFA51FD1623AE1C
+:10B950003B5AEAA57EB3FCCFC8DFEBA0DF62CCB7D1
+:10B9600058C59FA6DF8A43B5A8DF8AFBF1BA7CA938
+:10B9700049524FFAADEC97B3B02EBA6D31F807F0DB
+:10B980000AFAED0D55CFC138A0E7FE5D727D273D67
+:10B9900057D55B3DF73F84674DCFADECCFA13DD38D
+:10B9A000950F999E5B99C5F4DCCABD4CCFAD1CC404
+:10B9B000F49C51BF1574D16FECFBEA21F47BF423A6
+:10B9C000B37E7D1B6D2F9923BA2DF4FD12593B9F39
+:10B9D00051333A5ADFFDBBD48DBE739FC1732E3DE8
+:10B9E000E9BB3F82BE1B847A6C20C891913F6E1CDC
+:10B9F00068D3E5D3BDF7F5B1E75E0479F9038FFEAF
+:10BA0000F70726E627EDFBFAD84890BBF7001EAAF9
+:10BA1000EF9E51F9AFD5E7477D3A792893F7AA7B96
+:10BA200018FEAA1B3936DFD57C408675E06F17D12A
+:10BA30008FBE7D2FF3A3679B5BFAD8C0CFFF5F2239
+:10BA4000CA25FD2B298BE28739172B30EEB92BCE77
+:10BA5000B905FCCC3902B1801DBBE0D08D27C07E7A
+:10BA60005D70713DDABD0BE07922E9C8FB98DBA17E
+:10BA700027F5F6EBBCA69DAF6590AEF91013CD8C03
+:10BA80002E13577181CD595DF323A85D86F92DC61C
+:10BA90003C89DFABF39FCD47105FE48F7CCCF8E5AA
+:10BAA000EF8D787233BC54ADE6F578AAE162E28995
+:10BAB00052BAA42CA5132FB7BF14599701EDCB3957
+:10BAC000F4B78CF3D6F0669CBF8647CDBF59A0BEB5
+:10BAD0003F3F7424669E8886E72EF9221ADE0DF811
+:10BAE000784BD333D7906120971F983C3F1F0D7C34
+:10BAF000F47B8A170AE7AD7307E9CE2BBDA3E26595
+:10BB0000AAE748618A0C782435C067F3CA77BE96E5
+:10BB100042E777B392950B21F5597F933C108F68DC
+:10BB2000B6B6A31ED4F8709499C98559D52BEFF5F4
+:10BB30007515E27AD3C4B950BEC2063DA7E699791D
+:10BB4000EF61F2D7CCFDF7BA8C518867582E489137
+:10BB5000B65E015DE83FA786185DBC4017FACF6965
+:10BB6000A4FD20E0BD3A997387E1FDA69DF7023F51
+:10BB7000BD6EA5CF41CECB39F716860E7B7ACA654E
+:10BB8000F95888C5C718CCC8EB5C3F17C07B895DE6
+:10BB9000ED9389E696F7008E89546E36C3C300FD97
+:10BBA0002F8AFE46FBC5C8073DE50375C7EFB92AD6
+:10BBB0009E5F073AD801DFED12D843DE305B7FB4D9
+:10BBC00076AF201722DE343A34D1F56514A38329E9
+:10BBD000069E6FD6EA2A9EBD214E84EF6FA0FE6FAF
+:10BBE0001207BB7E5F1FD4F8DD2C77C513C415D2B6
+:10BBF000A3F406E8B7E87DCDEAA6B7115F37AEA695
+:10BC0000E699DC155F1A7D400F5E0E6FDDCA4FD3DB
+:10BC100091987961DF557E4699F5F2B3CFDAFEE669
+:10BC20007088ABEDE550AF9050822E7E30D3CCECD7
+:10BC30009666AB07F9BCFD0DD1BD45EEAA7FA6A85F
+:10BC400074017F25FA7CE2649808E84D97957CA6FC
+:10BC5000CD7B00E3B7E8F5E075AB07E9D75DFF33CF
+:10BC6000CCCCFEEDCE1ED3EAD7C37890D728EBC755
+:10BC700033AE475A5CA9A77979D471BFEFBCB471D0
+:10BC8000BEEBBE8497B4603C4EDB9FD8C37B768905
+:10BC9000603F1673BA7D100A39EE6FFE13FABF5972
+:10BCA0001ADD7DFF103F0A533CBFBEE3498C639F02
+:10BCB0007EF6C834909F15AFF0C442E5AF75878318
+:10BCC00084599E8804764245238FFB5D4408E7CD66
+:10BCD00088B233A827C3F0F1A203F55EC52E73A086
+:10BCE000847E5FF1F26739107F6B5DC3F49FFF596B
+:10BCF000951FFD911CC807A810D8FEBC913E8FA8C7
+:10BD0000FC796AB76D0EE86F6E3B3BC75B119C2DEB
+:10BD10009AA3E20CF79B4516E7DE6DC33C6CFF333C
+:10BD20001CE631037CD1E748B5FCD053CF30BD5C75
+:10BD3000D12406E03C70C5F69DAD1017AFF8D08C4D
+:10BD4000F6AB77FB1909ECD3C92F3ECFCE1B37F1E9
+:10BD5000BA78689738E4763E6C86F8596315EA013C
+:10BD60005A3F82F5A01AF7FB8E71B2152FEE7DD9DE
+:10BD70004F51B8E2374F3BF15C70CB3627C623B743
+:10BD80005F7E5FA04BDC3178BF1A779CFA05C1F566
+:10BD90002176DCF1A4CA2721B33EEE48B627613CE8
+:10BDA00092C299571A237ED1C1FFCF5F7802F6CD98
+:10BDB0004EEDFAF20980BBF29B734FFC94E2932A9A
+:10BDC0002017ACDBDE67DFC37D06EDBBF7557DD208
+:10BDD000FACCD3B84FD3FA27B31B7A6BDDFB4526D9
+:10BDE000EC53B4EEFC3A05E2B8ABF74E417F6DF58B
+:10BDF0004B9353490C7F402B817F03BDD82732D210
+:10BE0000ADB9B13913E03C4DE90EEB77473C3958F9
+:10BE1000C5E2F4B21A47DE117B5FAE4BDCB871C6E7
+:10BE2000CDD7C13ADE28BA65D28BF8F1614ACFE1AD
+:10BE3000BDA0E30E759F2038F5B2F1E3D3F00F4AB1
+:10BE4000AF0B667D1CFE42E392FF7C0CDA1A93BABC
+:10BE50008D1F877B813F6DDF6FBF59211690A35DDA
+:10BE6000CF61DC1EE8477D0FD2FAFC854C88BB1CF5
+:10BE700017DBEFC0FCEBBD66CCA3AAD8FB01CA530D
+:10BE8000EB4B6FE3BE1A51F7DF5A49C71FDB27514F
+:10BE90007D3AEF56078B3BAB7480B8B4ECC4E76ACD
+:10BEA000FC99F1B51697EE2E1E3DD63280EDBFAB54
+:10BEB000FB91555BFF2C1143BC9F1B0BF43A72D9CD
+:10BEC0007D540D0F2EC0C398E8FD96D8F1FF8EFD6E
+:10BED0001603DD809E608F75ECA7D07A3F88AB0794
+:10BEE000B80F62EDDFB56E66FB34AD62ECBC456D3C
+:10BEF000FF65A4C5B0EF12E8DDBE4B4FF3F8AE7896
+:10BF0000CA0627B44F577C9DBA145BBFDF6AE1D4E1
+:10BF10007B03BEE7BE7E2567CC1B98057C59D57890
+:10BF200044027B4A5BDFB4F99E52FDE753CFF278BF
+:10BF30004E645DB019F5BB517F5413163734C25BA4
+:10BF40006E617AABBA89AD1FA776390276DACFA9CE
+:10BF500003BB91AFAB771C91FCB4BF83DB7F234560
+:10BF6000A2F2AC60FD0844C17FEA85FD396C7F898F
+:10BF7000F9EBC671EE52C7F186628FE3DD71463789
+:10BF8000CE0A7F5062E77E2E3FDE4941990DFD9D2E
+:10BF90006C1109E4FD9F0CF2C58118E3CFB5885AF6
+:10BFA0003C8BC90F5D47F11CA6839DBBE41325B4F0
+:10BFB000BB573BC67E08E7FD573B2419E21775B512
+:10BFC0002C2FB5EEDFDC6940EFBA845B713FAEDE4B
+:10BFD000805F57B22B1FE21AAEC2D251C0AE46BD2F
+:10BFE00093A09874F0AF7614A7CA14CEB5AA9D4654
+:10BFF00004379E0BE59D45C5301FDE65725963EC25
+:10C000003B88F652E289C28BE8D29FE3249746CA66
+:10C01000D08F967F53696939888D2E05538C85B1F1
+:10C02000ECDDFC992E9C77DB0ED57F5088EC4A61C5
+:10C030007964B08EB4ED8ACF21C3F143A2507EB4AF
+:10C04000A9CFB91DFBF7835E5AEB244A0295338AC8
+:10C050005599CF86F3AC232C5C36F0E999FF7A85AD
+:10C06000F66B0DF1E857B4D9B57C522501E4CC4606
+:10C070001EC4BC4160E56F933AE134E613127825A3
+:10C08000EA3E8D29BC1DFDA1B39B587C802757FF3C
+:10C090007A028BCF9100C0AFAE2F2B5438CF12E273
+:10C0A0000EC3FB3B1C180F58F6C622941FA0433446
+:10C0B000BE928AF5E75E1BACCE1CF067365A55BFC0
+:10C0C000C6AFB4C0399BC56ABF7D4AF5E762A918FF
+:10C0D000FA415E97A8F2FAE5D2A243988FE6598A10
+:10C0E0007A3E758EFEDCAC314F4B20AA9F1C60FE61
+:10C0F0007397BCADA6CD08B7317F6BC5767D5DC3A8
+:10C10000E327A037AF027412FBE5E2803DE237324D
+:10C11000F8D713467D77FC9AD3F4F8B5CA7AFCDADF
+:10C120008618F1A7C7AFC3ADC797E6977687DFF844
+:10C13000B1FA73C8FF2AFC8A56D58E54F14AFF4AD9
+:10C140002D294C6503DCE94218E5C2284719F63071
+:10C1500007FFEE9F1CA8C5AFDC0ED4EF69EA7CB8E0
+:10C16000C5EC3B1BC8110FF0BA518EE02420E879D2
+:10C170001BF9D875CC0AC4FA8C7C7B4DF7F45C357E
+:10C18000FDD5230BE9579B807F87233FB0F3BE8902
+:10C190002450970572EA76C1FA1DF459DC8B45B834
+:10C1A000F785B8170F82FB5E5C583EA4E6ABB40D72
+:10C1B00025786E30183E9F02FAE9A1DCF669A0F7F7
+:10C1C000BC4B4829E8C11FC5B1F3030FA865BF38B0
+:10C1D00049D5AB856F4C82EF43A20CE7D5DB42DB40
+:10C1E0002C83A0DEC4E33D2ADE84FAAB60FCD6904B
+:10C1F000C8E05A6C090C8238C85E11C76D5D3C01FD
+:10C20000CF6576D86F21962FD216FACCB9284A9FDF
+:10C21000B7363D7A15C4B9369A62E7A94CB19A7E11
+:10C22000D8FA1BEC92B737C5CAF2EA1E1A40E7519A
+:10C230003DFDACBA0E3379B856A5F3AB4B6FC4F9DC
+:10C24000BF14E26458478AF8DB6E1A46E739EE3DC0
+:10C25000418DCFB078E528F5FD3AD02FA85FEBDF10
+:10C26000E5E9C3DD470502E7F446D52C457FEB152C
+:10C2700027E573CA17794A7024F06D612801EFCD64
+:10C28000F17E4CD0AE1FDD22E8F8334F5D57F3222C
+:10C29000545EC044F950DF3E2E2218ECA0000FFC83
+:10C2A00075ED71FDF38556D5EE729214E0F30D979E
+:10C2B000780EF25EDBDA897B0D85BB6D715F84A33E
+:10C2C000ED3C9CFAA5E525BE38D67ABFCACAF8620D
+:10C2D000A344709DD9B8D48EF1C5034B2BAE80F525
+:10C2E000FDAB1F7BAE88758E3C4A3FC5B37C2C25C9
+:10C2F0009E8C05FE5ECB31BCD7A797C6C8F7D7F892
+:10C3000059E36F8DAFD397C67962E5357E63657665
+:10C310005AC1D2219C04FEDA3E0E8FE3B6AEF15C28
+:10C32000F6DC8D9FACC90078BC4DE7D0EEB6843802
+:10C330002596BDB1C1EAC4FE5BD7F86B218FEF2E05
+:10C340002A9CA027BBEF7703FA5B3F81A02C7C6778
+:10C35000A92FC373BC4B2C640BC4BB85FAF45B1CC4
+:10C36000C0FF936F5847E17DACD484EBEB46D18D91
+:10C37000F0FBAB08C1F8831ACFED378D6C8E3ECF42
+:10C38000FC8435FF592BA5C7B35617D225C9E3E660
+:10C39000007EF73FFEDB09F2DD76D18C74ECABFA60
+:10C3A00043DA77AF5999DD36334ED90ADF93F26419
+:10C3B0009413B7C7E95E3C12EE4DA0788F92A34E5E
+:10C3C000FAF9F1BB440FD571149E44BB09F99228C8
+:10C3D0008AECD2C529FD28479A5C903047208F4DC2
+:10C3E000D3AB5C880B3BA81C8CB2D8C3E0772496F7
+:10C3F000D3795310ACC4C2FA6B114E759CCBC63CBA
+:10C4000079CA977970388A6048141271A17F4DDF1C
+:10C410006A7A7A6D02417959FBB010A8A3FD6C12BB
+:10C42000225688AF64297201A41A250A329E17EF9A
+:10C430005F4E30FFD296FD784287DD42857EC4375D
+:10C44000FC8258FB797C9C862FCF1F406FE41C6ACE
+:10C450003F00E68DDBCAC673BF66413BBD437FA884
+:10C46000F65891BAFE8EFBDCC4F209C29348F43E42
+:10C470009B517F68F6C9B8EB226B60BF68DC9F18E0
+:10C480009CB45B05BE1BADCEB7439FA8EBE69810EE
+:10C49000D527F4FBDCD0C866B8072BF76326C75D49
+:10C4A000F4C9213F0FF8FBBE7AC4C81723C2542E2B
+:10C4B000D5F6A132DCA7E1EAA843FB1983DE499E49
+:10C4C0003E2A15ED5C95DF8C78D6E4DB28F7B9774A
+:10C4D000BB9BCD0C2EE6471AC6215C271C7236E8A2
+:10C4E000A5B778B0F7DBF2291E285CBF02F9A3F4E8
+:10C4F0004B381FB801E6BF2174BD15E4E47BAF27BC
+:10C5000021FA75549EF6D3BC273EAE0FAE274EC01F
+:10C5100043F5FEF3EA7A12467A77C8019593E878F4
+:10C5200089C6FF467ED7E4A30E2EDEC8C673760406
+:10C53000D6599E0BE2653066B2C90578D5ECED3A66
+:10C54000D5BE25FE74B4FF56BB88BA1E6506804F63
+:10C55000EA44CD5E775BA2E353AB1D05A997DB4FA1
+:10C56000F55EA4FE59D4391BAFD08EFE9BF7A28492
+:10C57000CFBF37FE9A2814793AFC8D891BDD157FD1
+:10C58000F17184B0FBC2FE9F9FDF0C237FDC277715
+:10C59000CEEF5AE2792542F547DEAAF57536193F06
+:10C5A000399C96D7552F68FB9FDDE901A3BC8FA965
+:10C5B000AC6FC6704B0FF2EEB5A9F8256406E8B370
+:10C5C000F1616AB7647595FFF3EAFCBC3686F7B68D
+:10C5D0005BDB07833CADE73D3571682F464C26B0E9
+:10C5E0002B7613B47BDCFB8F3A51DE5B9274EB4FFE
+:10C5F00057BBC08FF2A9D9A79A5D6A7CAFC32E55ED
+:10C60000D71B2D3ECA355179A1F03C19E7F1031C27
+:10C61000752EE6BFC20157D0634F583D75C05F36D7
+:10C620003A9738D82F1912CE62F196B04E3EBB938E
+:10C63000479B41DE82143FB0FEF9E9FA3788EB1ED2
+:10C640009EB171090C5EAA85C0BEE99747D860D536
+:10C6500004F3C7FBE5B0FB6BFAE5B2FB3237C73139
+:10C66000FB658BA17CC25AFA18CC4B1488DF9CFB6B
+:10C67000FDE10650210EF9649CD200F8B0142B386D
+:10C680008F0C17717394DE19429083BC89C44A9948
+:10C6900063F147D2B9FF48FBCB2891F3813F3206C3
+:10C6A000123C379A118A7D9EE89538F187D9EB8D37
+:10C6B0005DCEC1BCA2CACF4189CE37A9849D83E992
+:10C6C00088FB50F001BFAD8E5B71B2AD17D83EABA9
+:10C6D0003F81E1D9E8BF01C1605E825ABF57228223
+:10C6E0003511FD2B3FF0AFDF6441FFCA46DC41D07E
+:10C6F000B71FC4B1F8EC3ACEBD1EEABF10DA2D70F8
+:10C70000CF8F26379A3C3C34E116B7405F755E7791
+:10C7100036077C5F2A17EF009E5B279C1DBC1667BF
+:10C72000D29EC9F84EE175F9F61AFD9A441DFDAC8A
+:10C73000105789D6F30E6908D8EDAD5C9C1BFCAA96
+:10C74000D6E51C8397B3A8E71104DD3CD36CCC1F5E
+:10C750006953F5E7DFE3B2901FB5F584CE6F3DC6B0
+:10C760007F0DF3E838876A38776A3C979A96DD112F
+:10C77000074AC77CDC5209EE3223674336B4E3BC78
+:10C78000CEF64C12E3BC646AC41AF35CB05652BCD9
+:10C790007D0D784B156B12401FA7DECEF488111F5C
+:10C7A0006D9C7FC441D847FB8318331F452BD3D2E0
+:10C7B0006E4A584CDF4F4BBF014BED79835D8819B2
+:10C7C000574CB2713FECDC6403B118FCCD241BED77
+:10C7D000EFB4E79DF71514FF768CBB37C431BC3737
+:10C7E000C431BC37481A3EE57890BFCEBA5B97F7A4
+:10C7F000B4C1674910200FD19F8EF2B9C4C5E8DDDE
+:10C80000F9BE82F64D1FA2DC301794C406916C432A
+:10C81000BE67F121ED7CC8AF7CCF2440BE94DB968F
+:10C82000A5FAFB1646DF0406F7F90D5370DC14B2C7
+:10C83000C63A98E27969A9C90D71A3D30B3F72C2B8
+:10C8400091E985192D79200FA7798F1BE6974A98D2
+:10C850005FB86C8E1408D32E931BA8C26274BA0101
+:10C86000F73BCB4C31F3AEC7D8D8FEE9D138179699
+:10C870006969D3904E9DF59204F04B8C7C4AE53566
+:10C880007DF1A8CE73CC946F145B0C796B134913B4
+:10C8900087EB5B18F195ACB1B3AAB7357949063986
+:10C8A000847DAB52AA47353A0F505F4DC1B828FE80
+:10C8B00071A1D7BF067FC3795D01EA454D8EC810CF
+:10C8C000A6E7ADA077A3E2A16D7B3FE80FFB8E9FAB
+:10C8D000FCDB3907EC3BFD556877809E3D7ECFBB86
+:10C8E0000E38C7F4C93D2C2E7287C14F5B6463FAC2
+:10C8F0007F8FAD741EE07781EF1F799E287E2577AC
+:10C90000B3FD93E501DE70DE5D7F6F505530C97079
+:10C910008F901FF15AA5DE1F66A4C7461B8BB72C4C
+:10C92000DFB159CA90617C4F258C7F5CF5438F370E
+:10C930003AD0DFD1E059B8638404BED95F4366754D
+:10C94000FFBD4564EB875202FB671E156F46380F2B
+:10C95000AAF76A2FF925CB8F29A363DD4DF5B02700
+:10C96000C4CE7B18E7B1E413B92895126FC9FD1C3A
+:10C97000FADDF0FE3D743DF3DC7D1FEEB319E7D91F
+:10C98000F55E1F05FDB3652ABD8DE76D9785D83E21
+:10C99000F862E241F9EC72FE36C4CEC518E38D6749
+:10C9A0000F65DB000FBFB0A9F1C43C3206CE6DEFBE
+:10C9B0003A3420FE72F7569F52EF8B827BBBA13C2C
+:10C9C000EE2358CE032390E2BF32F4F65DC05FD56C
+:10C9D0004D3BF13EB4EFAA8FAA42279C904BADE9A4
+:10C9E000256A876E03F9208B399D7D5ABDF99CC459
+:10C9F000FC6A869FDBD4E7B7013E7220DF5BFED97D
+:10CA0000044AEFDB2AC5F3D1F7A53D6FD3EFC3F797
+:10CA100076BEDA3CB5796BED556A5E9CF13B4D0E06
+:10CA2000E6A97CB978EBF4757D298AEAF67E91A9AE
+:10CA30009E93C3F3421A9F2D23A545E931F849A3DC
+:10CA40006F07DF847E8EF3D3E8BAB8BE4CC5833F50
+:10CA50004DDD4F4C837895918F7A3AA7DD2A463287
+:10CA600041BE8D7CD2DACD7D28211BB32F16CB4A57
+:10CA700011C4CFA8F9BBCE1565DF1C17EA0FFE1451
+:10CA8000E46E2BE3FB0E3D084E31E8F737455CFFC3
+:10CA9000573AE454B8FF0FE9370EF213CC7E784FC3
+:10CAA0001BE7984F51068A80FF622C4FFA4A958106
+:10CAB000833ADB976E3CE704FBBB6D08C1B851AB12
+:10CAC000430FEF691B8F7AE3B44A8F4AA1E59B3F7E
+:10CAD00083CEDADA827917C72EA971A74BE6E2581E
+:10CAE000F3B4D839DDBD7877A872A8F9350B54FABC
+:10CAF000DD1162FBE90B374D477A74C9BF54FDA1C4
+:10CB0000B2460EF58E913E4BDCD7633EDAA2403E34
+:10CB10007EDF855EE441A4BB916E77DA5DEC1E3763
+:10CB2000A146827BED8E6DE270FF7185107BFF73F5
+:10CB3000B6DDF49DE6639C4777F02FDB5ABBAE2F42
+:10CB400081F98F9080CF8DF06BF35F4214A6A7D44C
+:10CB5000F976372F1299C4F234D4757F399C5B81F2
+:10CB6000FD93077996CFADC6A134F835788DF328BB
+:10CB7000E22BF17C415B038F79D977F8D97D067779
+:10CB8000ACE570FDED8E4E9A5ED1F67BAA9BCA3065
+:10CB90006FCB43FB013BB6ED63C2F629D67378CF6A
+:10CBA0005BB7F40CB17CA5EEE84908A3DB624A3719
+:10CBB000F03FBBDE9F90AF0C8CDE270ADCA00C8C14
+:10CBC000DEB72241CC5759B17DBAEEF98D76358E5C
+:10CBD000A5EAF59EE48FD424C48C6F69F2A6C99FA0
+:10CBE000268F77DA65666F0A81831959809F87D10E
+:10CBF000BFA1FA7A9E9DF93D0FCDA5AF546F3CA71A
+:10CC0000DBA7583296D16B095F82CFBBD3BB140F21
+:10CC10003ABDBDD8AECFC3F8A1F3D1E6A1C98936DC
+:10CC20003FA39C18BF37D2438BEF19E962A407C01A
+:10CC3000097EC65B7B6D813514CEB73806B77FAFF2
+:10CC400015E16E4D9BACC0B9CDEAF4F958FE013E3A
+:10CC50004C07FBB0B4CE8E76AEEA878DEA5D5C22DF
+:10CC600057B5CB5EB22A23D9B9A7D224E09389B5B0
+:10CC700091191617218F3E585C04F7A44E7C383268
+:10CC80000342F1BF7EF04656DF1679D7E286FBFC01
+:10CC90004B8A0A69FD71D02FA02FFA95DBE0FB6E5D
+:10CCA000EBC473F9BACCDE1F652E9DCFEEB166EDF5
+:10CCB00095D43EB3D0F5AEF2F0E057417E2B5B4AFF
+:10CCC0008A212E54091178BADE5529CEB02D87ADB0
+:10CCD000FBE3E97B1FD93C4FD921EE76712DAE8B5A
+:10CCE000958705942F7288C567053A572BFD6E6DA1
+:10CCF0001CB593297ED7265ADCE017D3E77EF09740
+:10CD0000D7262AB21CF55CA31F7C0770AC35B17C1A
+:10CD100082FD6F0C8E8F5CC62ED8EF2325E0CF34BA
+:10CD2000FB2C581ADBF325179EE7C837B17889B179
+:10CD3000FD6DBB76AE49CE00BEA83E24A1FCC31F4C
+:10CD4000D89F5584C9493561E7D0AA0E133C775363
+:10CD50007DA808CFDDC0B9844F757AE05F73EEA679
+:10CD600093AF189E0A04AE44881AB7D06ED5D5F991
+:10CD700054D310980FE1E3DC706E84CF30D5ECA271
+:10CD8000F3E7AFA025C587E072F370FF4CFDE4899F
+:10CD90003CDC9F5527AA792D26763EBE63DD57E5FC
+:10CDA0004F2BFB394A8F02DD4FFFB125CFC6F6531B
+:10CDB000D0AFD6E65BC72984037FED3582E71972D1
+:10CDC000934933E0CF4694B1C06F1647A2CA976C1F
+:10CDD0003F9BFE6540E9369B7E23537EFFFAC19F51
+:10CDE00022FFBBE34DABB2689D73F8593DC3742E6F
+:10CDF0008BB230EFA865F56B4CE706D0BAE858C3A4
+:10CE0000EAB0F14A173EB3A3AEC83F14C67131BAB7
+:10CE1000EE50AE01FE164C2CAE231C90707F47CB1B
+:10CE200057594B7906F8D1E2607A745D6DC173365B
+:10CE3000889B172832E44FEC51EF41FABEA5865784
+:10CE4000DE66427F094AC07FBC83E153A30B69546D
+:10CE5000AE813C5E1254AE817DBD7E0E4FA2837EBC
+:10CE60003FF2AD9689A0CF1BDFF9280FEF73BF8289
+:10CE7000F533F22DEA43D2F99CFE6DFFCDD1FBE4F0
+:10CE8000FD1CF9A9F01D2503DAAF9CEC22B751393E
+:10CE9000AC53882C65839FADF72F1B09D34F1FD947
+:10CEA0004AAF70A03E09E33AF613BB6700D48D7E0B
+:10CEB000336949EC55DE9D947337EE172566347D52
+:10CEC000B810D685DFB17B4A3845C1FCD3173BEE9D
+:10CED0006B231897B2913837C48D899BA4F953D42A
+:10CEE000F89A89F155725E94FFACCE877E5F08791F
+:10CEF000F2636C2CBF81CE8F07FD3A82C8588E84B6
+:10CF0000385936A0D883F53D24F8E14F69FF8F5892
+:10CF1000597CCAB29DE8E28F650E16B779C0C9E2A6
+:10CF20008F7162F016B02BE2CE1017D8156D8F4BB3
+:10CF300002EECF0BAE9B70DFEEA009E3DC4F8B015E
+:10CF400017EC17B55F25C85B48677F6D2ADDB57E96
+:10CF50001F91E4AB20EEF70B27AB3F9D4F308FBB0B
+:10CF6000FD841480FDDCC40C4B4D743C699E83D958
+:10CF7000BBBF7315CC043A04F7C611187FCCBE387A
+:10CF800013D0E3B91DB956E08B170147140F89661A
+:10CF9000D79DD05FE2390A6F163E67F9FD823C22C9
+:10CFA0009EE277FC8D7619EED17ADA1ABC11F3562F
+:10CFB0009F37E1BDC12F4AEEE9507FF1ACEC023D55
+:10CFC000FC7456300EE7F3BC09E7F3625CFBD52B2B
+:10CFD00029DC0F0C61F12EC14604D0CF82A940BEDE
+:10CFE000933E5FAEF2B1A6AF37811CD1FA231CC1CC
+:10CFF000730C82291FE548CB276A6B27984FD467AB
+:10D00000660B0FFC1C375D8B3B857988174D2825F7
+:10D0100068CF4DB08B78CE05F299E1BCDB44550F5B
+:10D020004FFCB8B284E507BB0FC3BD9ECD76F57E3D
+:10D0300030759F7392CA27D791086FA1EDD75D24F1
+:10D040006E88274DBAA8DF8F78CA605F4E51FB57B4
+:10D05000DA5D85F0389FE8EDBF290D4527603D2C4E
+:10D06000208A00FC34D96268073BD209F7F0EB9FB5
+:10D070003FE050FDDC4C92199DC7A6ED434DE18782
+:10D080006E44FBB55872035E76DA950F203FC0DF21
+:10D090002292CBC5259FF2B17CC321176D04AE2C23
+:10D0A000A4FC6987F95CDD50EFB7D2795F3D90F55C
+:10D0B0000F7C08FAE5CAC7939340DF8F57E9A5951F
+:10D0C0001ADF017FB9E2197FB98677CAE7D38E2CC0
+:10D0D0007C4F9337E03BE8678F18981F6BBF9BF23C
+:10D0E000EBD3C0AF3BED04FDB89FA55BE6809C6928
+:10D0F000E3B4AA7C6D2CD7D5AEDC0FBFFBE4BFC078
+:10D10000D68DC2BE17A5E875BF4F0283D72BD7CFE8
+:10D11000980679687611F3CC52D47351D1FC921EE3
+:10D12000C52F1ADFB5DA599C48E39FC9BBDFE5E19B
+:10D13000F9E40B84B8B24887BFA2F1CF447F18F757
+:10D14000812712E69F18F9675737FC937F5E1640D8
+:10D150006F75E19F438C7FBAE31BDA0FDE6B61E4EE
+:10D160009F771CAABDDD2DFF5CC2F3FCABF74EBE62
+:10D17000EC7E65934F9F9F6A2CC7D962E72FBB5403
+:10D18000BCEF96EA6FCA01BD31D5C4CEEF0924E3E6
+:10D19000160AEFEE38EDDEFC9A6CA8EF14981EDA52
+:10D1A0001932A31EDA69F778307E9B6661E757056E
+:10D1B0004F04CE23B8FB5AE4E8DF21D9EE6076585D
+:10D1C000500C8FFB02ECF137181F8C9D9ACB432A31
+:10D1D0005AFA62A617461D9736C3EFCF3DEACCBF79
+:10D1E000007C9606B8A3DF798F4A78CF52F55109B3
+:10D1F000F5E36FF7BD5D04F1512DCF79CC9EB78B70
+:10D200000A86C2FB8CDFFEA1EA65AD8E4740405F17
+:10D210001AEEDD1FD7711E4B7F6F7E29F0514E67CE
+:10D22000BBF13EF9601CDB3F994D6411869871B4E7
+:10D23000F45EB8DECC78AFFCEC303BFF36F3B027C1
+:10D24000F6BDF22A7F18EF37A7F6778A13ECEFE7DF
+:10D250005AF6416884C86CDD0E4A35D7303FA326A4
+:10D260001BF8499343FCA3F80B7E3244F7BB06B787
+:10D27000A9F37FD02DB0FBA92212EE4BFE9CB0EF9C
+:10D2800082EA3A36CAC9F440EEEA17E6039C23CB99
+:10D290009566A0CBB32E16D7F905095BB2816E6EE9
+:10D2A00001F75382A23CF90BAEF33D22940EB1D3A9
+:10D2B000F63D7DE246C2F88F3A3D639C609F09EDE2
+:10D2C00087E0BB31E37347821EB78F589B04EB9A0C
+:10D2D000063785AB789BBD130E0DAE814EC6978F7A
+:10D2E0003ACBC6001EE03BD04B4D478E59E07B8DBC
+:10D2F0001F827BCF303E88E20BE0834EBEE01640BB
+:10D300005DC383A2AECFB7FD8BF8428B6BF4C81719
+:10D3100010B7707E2FBE980B7835F205B5E73CCE7E
+:10D3200018F65C50627993C6E73FB1E7E3FB6E897C
+:10D3300060DE13D96765BF6BE849C07D90DFB8D860
+:10D34000986D9F1CCBA4A62859E56476BDF63B2AB0
+:10D3500023C21CDA9F23A8A2B80DEDBC7EA827DD4E
+:10D360002AFEC8318E83FB4631373E03ECD0701263
+:10D37000D86B23CC256190875DB68919603FE6DACA
+:10D380002664C3FC5F1EB2FA4D58D25EEE5BFE9B74
+:10D39000AD72A77DA5E9C366B55B6DFC352A7F4CF0
+:10D3A00052D87927D0EBD17068EB039009E0E0C246
+:10D3B000B34DDFDA508F8722146F93000E8A87FDFA
+:10D3C0001C6904FB21DFA4244F063BB04F580038F2
+:10D3D000DBF67E9D09F1CE92D0EB1F02BC25DA3E32
+:10D3E000AC5BBF0F6BB4B7357B48F33F347B49F37D
+:10D3F0007BC1AE82F632D51F7199D9BED884B005F3
+:10D40000EF5378E4AC7C95A2CAB340E751A2CEE3D7
+:10D4100066D2827069F7A94C53F1517288FAAB3920
+:10D42000D04EC8548A87A9EA7D2A53DDFAFB226EC2
+:10D430001E1BFB3E15AD9F9EDE37AE1BD71AF6A313
+:10D440007E6879C8C7EE4FF9BD8FF9C3E307F07E58
+:10D4500001D6DFB159ECFE0917C3C32129F63A768C
+:10D460005195EBF1A6480E9CC7DEBFE7EFB86E1EE4
+:10D47000D8F3F7F7C18E1C77422090973BFEC4A8E3
+:10D4800078CC0F182B235F69FD7A3F6FB411F69C9F
+:10D4900044FFDECC410A8F7225C067C1F295538FDD
+:10D4A0003C0AFD9D3F2A90E8731F45926720C4E522
+:10D4B0008BD4DF1D3AC8317B4A6B3FA8FEDEC71113
+:10D4C000956F212143BB67C51C45E7A9EAFD1F1ADB
+:10D4D0005DA71E2F3E21E474A50FFCFD33E2105A18
+:10D4E000FCE19CAA0F49F39FF07CCEF58D770A6092
+:10D4F000BF5F9FC613256ADC1B64EAE947C5214E5E
+:10D500003A0DF66FF3338F4E83BCE5B7784C81F458
+:10D510008676BE9903F5163EE6BD2A46FC5E1FBA26
+:10D5200013EF55991BCFE4A3A7F1C75F4DF96438FA
+:10D53000D09D303B308FDD4B62A4EF813DFF9114D5
+:10D5400019DA3DBEBBA3BF910EAF9C2AC07DAC9E35
+:10D55000E861E4DB7D749EFE2BE177532DC48FBF21
+:10D560009BEAC2FAABBE34AC6BFCEADDFB6412D8BA
+:10D57000791A9F4E49627C336EF7A349C4DE492F66
+:10D5800023DE86C533FE7FC9AAD925EE59D3E8A389
+:10D5900077E93A848CEA272D903756AAC23AFB7075
+:10D5A00011DA25443DCF625CDF66F3B74D0175DAD1
+:10D5B000D3EFFECC94CB7AF57B39C56FD50BB00E8B
+:10D5C0001609AB991E53ED780D1E239DDF23A50888
+:10D5D0007F77F019F9C008E74B1DF9F60AAE07DAB4
+:10D5E000EFE0CC18982526C69887868F9984AEC719
+:10D5F000D9BD5F8F6F8CD7DBEFE78E17FE11D0DAC6
+:10D600009DBC19E9666CD7F447110C908BA51FECF3
+:10D6100093B9F12948DFA28B1251E83A43FAE9CFD6
+:10D62000F593922B91DF56B9D8B3EEF8ADFA224FAD
+:10D630003C233BF94E6C7AD8067CB75BA8B7411CFB
+:10D64000F53AFBF43A10BDC2CF0B66E2FD1511139B
+:10D6500081D0DA94D099668833783F2478BEA120AF
+:10D66000B47F32F0E9AB420BFA596DE7097938CA59
+:10D67000EE6C0AD5D9C02E6B4A66E7F30E26105D14
+:10D68000FEF4C578A66F9A8E9E9DA6C4681FEE62B2
+:10D69000FC3C8328C939F49F45EB297F801FDCC7F8
+:10D6A00081719242CEFD5A32D82D7339F423DAF6C5
+:10D6B0008E792D99C2DB7A7B02EA99294DF7DDE953
+:10D6C000A28408FE63243E6F2FE3F0FE8422D98DEE
+:10D6D000F5A2C559E8F78DF926694609B4DF20A2FD
+:10D6E000DF3385AF14205E753A8DC3AB3CF6709185
+:10D6F0005AF83D62FF74360E71F993C03F7DA7243E
+:10D700006904FE669EACD507E1EF2E1283FFB6FAE0
+:10D71000A573FBCDB47DF52C0EF38DA7B832883FF1
+:10D720008A7F8AD64B38AF5B42A905C0D7338AF5CA
+:10D73000E71EC3AA3D39ABD44602D1FBF99C0BE5E9
+:10D74000FAA0B5FD56FC1DF1BD2281F969727EA3D8
+:10D75000CAEFB3E724E9BE9B4E98DDA9C9D54DAA0F
+:10D76000FCDDA8FACD733D19BAF14B09B387FE4031
+:10D77000DA0B8164F7B8D87EF4B4F696C3F3E125EA
+:10D78000BEDF68D087370D31F8BD7CE55AE48B34B5
+:10D79000CE8DF7C8B8F5ED378FD5D78DF26BD40F96
+:10D7A000B3208B8FEFAA27347D306B2F2F423C683C
+:10D7B000563EC533DAC57ABBBD277D3126AE1B7D0B
+:10D7C0007149BE17CC902EFAE2E3E2EFA52F7E4B13
+:10D7D000DD96B154AEDF8E57D7CDFEA43FE88D293C
+:10D7E000FC8E47818FDAE8BA698EC147DABAA3C5E1
+:10D7F000018AA81CA31E38C5F663A65C4C27FE91BF
+:10D800009D71800E3D42ED12770C7BA9353E1BE5E4
+:10D81000AB43EF687A25CA2E11F37EB85D3285DA04
+:10D82000A3522EC0D70FE12B52EF252982842B88DB
+:10D830001FA69DC1389057A0FE2CAECF4F227F81EE
+:10D84000FEE3123BE5C368AF6871E80A97664FE9EB
+:10D85000F9A5231E3993DDC3AAF14911E013E47F32
+:10D86000268FFB04FF1BD47F03B300800000000061
+:10D870001F8B08000000000000FFC57C097854558C
+:10D8800096F079F55E2D495592AA6C148BF012B67C
+:10D890008424588480EC165958A314A080CB688146
+:10D8A0000B6B129A719CEE69FFA642024343B78349
+:10D8B000D2DACEE8F457D83A831AB40801039DD0DF
+:10D8C00015504C5834082EF8D91A6D1AD10E4984C7
+:10D8D000D646BBBFCFFF9C73EF4BAA2A854DFFFFF7
+:10D8E0003FDF9FB47DB9EFDE77EFB9673FE79E97E3
+:10D8F000DB9B55B3AD08E0F6998A071400D0F177A9
+:10D9000022C042E07FC3ACAD16F08EC7BED7FC6923
+:10D91000870DF8E73BFC2F9C90FC2CA450CF0B907C
+:10D9200009B054CE5FFC577D333D5E3C277AFE52F2
+:10D9300098FDB9920C701BF8CD301CF7F3C58EFF23
+:10D94000EC4B15C7972E8B7E9EE94C4ABF9087FF04
+:10D95000180123BE5301CAD4BA9DB722BCDD275596
+:10D960008F554C33D1FE0F39C5FE0F35970C807C97
+:10D9700080DF7416A7F8B13DB611211C0DD0BAD1C5
+:10D98000C6ED71EC07F1C5EFE8E7663C9F05FC21A9
+:10D9900007B6B45221B701480518EDC4452760FF0A
+:10D9A0002A9E3F0DC78624C0EF73245CD900AFE7E1
+:10D9B00098E704F1BDC3B85E00D70DE3FA015CF748
+:10D9C000C84627F75FDBE8E6FE0D2E446A06C0FA7C
+:10D9D0001427AF372FF776871FDF5BE3CCE6E750DE
+:10D9E0003EDA44F836E02F7B6A080410DFAF77ACEC
+:10D9F000D09474802AB7E2B166F5D1014FE3588E16
+:10DA0000F3CB25BE2BB72A10C4E7E51FAE2B07C406
+:10DA10005F5733EE87F8A92A558336FC6749D363ED
+:10DA20003B45DF0CD608FADE228E0233B516CD86D2
+:10DA3000FB2CF0281E15F7F13689F76FF52A411DEA
+:10DA4000FF798B279A1E8763E8BE58AEB380FE0F1E
+:10DA5000DF5B30470986719D0593A2DF5B7C75D63D
+:10DA6000E7CAD8FE7CB498E83EB63FBFDC4E74B738
+:10DA7000E33F86C130A2FB958BA56F8D853EBAC56D
+:10DA8000B6B1748E1DBF169DEF273A675C9BCEC65C
+:10DA9000FB7F8BCE0F114E90BE70F41B8B9E04301B
+:10DAA000BBE9071AD179F6558DD7AD32CE3314863E
+:10DAB000D279FED459F86FB742DFFCAAA62F2DFE0B
+:10DAC000826B9FE76FEDBF2245E7FD695F6F7EDFE9
+:10DAD000BEF33480C178CEF939D1F88DA56B2CBD59
+:10DAE00016CAF762E9B535E61C065DA013996860B1
+:10DAF0001CBC5F55198E6BD1AD972E16FF084F7E5B
+:10DB0000FF71805FF3B9FAD693748276CD5720E027
+:10DB10003247C803F2752005E95BDE0AE14404ECF4
+:10DB2000968B733ED7A8F528F069C439E8E753838C
+:10DB3000CE6ADFFA655707B2FC19FB966910B0147C
+:10DB4000D2732197B1F055D23A23697E80F968CB20
+:10DB50002ED3B2109E63BA05EEF5519B28DA034E20
+:10DB6000A1071A9D265EB7FB2B9B096E0478E5F092
+:10DB7000806240F83C56E709D28B2133F0FB45C95F
+:10DB80003ACFDF9C048104DC1FB4769B0FF9442B51
+:10DB900006C84139D306598235B8649D16F691DC22
+:10DBA000757B34A846B9BBD178EF48E02E40926C23
+:10DBB000FE7494A9268BDE0FB74FC57937156AFA24
+:10DBC000369CE2B2EA3FA0F1AE66AB93DEEB3EF8E4
+:10DBD000CF2D665AE72BF02084F05A3332158E4F42
+:10DBE000739883A437CAD493AA09FBDD3D00A48FA0
+:10DBF000A62D0B9700D26D3AB4D738B19D42748CE4
+:10DC000043BFBFD0793384DE1A88749A21E9344344
+:10DC1000EAAB926695F54649921A84AC3EFD74B320
+:10DC2000A4D18C407B490AEE3B43533C35D8BFF925
+:10DC3000AA16C58F2F933EBAB14F1F95C9F5BD3DAA
+:10DC4000BA869601664234FF96350A3D54628B7956
+:10DC50002EED0FBEC97C55E68C1E9F42BA13F9FB10
+:10DC6000628C5E8218FB53A6FE35B903F1F08AC5BB
+:10DC7000FBDE5484BBE7B4199EC5E770113B93FBF0
+:10DC8000E3A731C61EC5B6070F277A7584EB15E2E8
+:10DC90002307F50779F5B1D79E3FB6A3A7988EF174
+:10DCA0004ADD220DB2992DCFBA33FBF0DE0FBF92C1
+:10DCB0000EB178AD977ADEDBE87C8D8EDB0F8FAD11
+:10DCC000B3D89E97FC49D748F5FDBDF834E4E595F7
+:10DCD0000B895EE2FF572E0CF2B2FD4AD2593E0C80
+:10DCE000793878FE7222E951C4A7AE219FF4B86C4E
+:10DCF0009E67999F851C84068E0A6EC3FE8524C18B
+:10DD0000F7AF24F61CCF23BCDF62F23C4BDB68EBA1
+:10DD1000872F2A20FDB975D1793380E205E5872860
+:10DD20004F8AEE84BBB10DA03C11FF055221487211
+:10DD3000628610D0BE355E789ADA19D3F414C2FB2D
+:10DD4000655CB3DD41EBE929C4F7F0D72B137D0502
+:10DD5000FDF15FBF117C1AEED3B0D1E6D3502F1C7A
+:10DD6000D8E8E47EE34637B78736EADC6E3A91FCC2
+:10DD700043F21FAABC169F16A157E6A50AFD300361
+:10DD8000F50EC13503946000796FC623C0F2887226
+:10DD900010DCA410BDF03C397DF844FA5CEE88E854
+:10DDA00043AD563B2193A582E95E9867E2F7D1091E
+:10DDB000083E9FD57F3ED23FAABF8CFC1684C3EF9E
+:10DDC000F296B9B00D397CB35D88DF7A65E9D14B45
+:10DDD000C0FDB9F4BC5EB943BD84EB8F0FCF841F87
+:10DDE000A2BD188F8421BCE2CF5D04FF84160B1006
+:10DDF0007DD0B0B27C161AF2F9B5A25CC0FD4884A1
+:10DE0000BE1B8CEF59CBC3C44F07A0238DF05E64BB
+:10DE1000F3D9497E97B9043F7895DBDD0AAE3739EF
+:10DE2000C3E25109B4E1BEF1EB117F2D19B821CE47
+:10DE30006F69C91CA2E713B7BDF13EC9B7D7E608A1
+:10DE4000AB6C98CC9D1D11F67C003CE3247F927452
+:10DE5000DC7768475A3F4E0EB09EBB6A09925E6BF4
+:10DE60003D93EC09E33ED3AFDAD8BFACA717516EB0
+:10DE70000F27268F653D13420D43F26313E7986D1C
+:10DE8000F6AF233CA0653E7A0ADFFBED6500D2AF1A
+:10DE9000D3DB3F54C90F2D31E50EE840388F2AA35C
+:10DEA00053A87DF2E3E47C6ECF2477127E0E9BECC8
+:10DEB0003AEDFBCE46BD7404F2CBA98D503A02F97F
+:10DEC000E3AD8D366E4F6F74727B66A39BDBA33818
+:10DED0004EFCF33A8E137FBD81E3D46FC3716A4F5A
+:10DEE000E03AD47ADF7298487E67BCE5D0A82DBCB2
+:10DEF0002B89DBFA3B932C748EC3C95067EC4FFC23
+:10DF0000144E0C378007E52ED5FD53DB0D683FAD71
+:10DF1000FE02651CC0D454F75C6D3AAE3B7BE88FC3
+:10DF2000BEC2F119A9C37E6A43786F3BE3683889A2
+:10DF3000FDD2C7F59F3A883F4F24A292243C64B794
+:10DF4000795136C793D218C468F7C224ECA719FDDB
+:10DF5000ECB9A5C80A4B4A3AF2C005B0F3B1E17377
+:10DF60006D88DF2576FF3F51DF12689B533A9DFA9B
+:10DF7000107092BC2BE620CBFB10257D11DABFADD3
+:10DF80000EFFC4D4087FC0ABFC218DF4C344AF02A4
+:10DF9000AE74A67770A4D2F7DC98B7D55136311598
+:10DFA000F9F7D72E95F969C234C51B74F4975F63EE
+:10DFB000DE84F37A29D16FE2C559B5D42E98E3E215
+:10DFC000BE6FD94DB524FFA58E6BBD5FC2EF875CD8
+:10DFD00066D647C51ACE8B63178D79E391C9C8FF02
+:10DFE000EE694B0C3E4B7C7DD65F9384FD327756B9
+:10DFF000A12A753470DFB56B1B8D97BFDEC072E54B
+:10E0000049F2E859C48AEDA569383ED3A178C22403
+:10E010002AD33EA94DA371A7E221B4CDF48E3B557E
+:10E0200044E32354CF4CEA9FD54B9DD89ED1664EF6
+:10E03000BD84F366E7A4786CF8DE99F08FAE10FF2C
+:10E04000CECC49F224E81417049FAEA4BEC7EAA9B7
+:10E05000D6E91C8F9524D33ABAE23161BFFED6923D
+:10E06000FF457014FB52405168DCA5911FFBE4C7CB
+:10E070003F2975E2BCFAA10A90FC9C09E7FE91E0F9
+:10E080009FD99AA8272040F5166729BD576F519C44
+:10E090009BB8EF2BA1F9815166FD795CF7E49D7681
+:10E0A000B607E56FE5B35F74F2CEC16C17CADF9AAD
+:10E0B000564CED4993F0DBCBDF2A9FC3E326089350
+:10E0C0005229BFEB1FF8BD1D253F294DC7F54F0C49
+:10E0D00073B16E413A956A117A0DE78342EFDF55CD
+:10E0E000C1F35B94013F3A8FF3AFE4A7145A71FF79
+:10E0F00059E90951F3E70C7145F5E78D1858AA4520
+:10E10000D8B1F2FCACA8FEAD454AE98888F9BE69F1
+:10E110000951FD45A5AED21111F36F2B1F18D55F24
+:10E12000725B56547FA669B2D01F1BA1BC54C87D38
+:10E130007929FB9BD9AC870A9D62EE1B387E3F8E06
+:10E1400017B6097FAAD085FE14D2A5B4AD88FD808C
+:10E15000367C8FC68BEC528F05A0DD3D91EC80FCA8
+:10E1600009E22FF68B6577663BFA056389AE68B7DF
+:10E1700023E02F7544DBF1FA44E127CC017FAD0B9E
+:10E18000E939A7751EFB5765E9D54561207C46BF77
+:10E190001F0B372AD19D77131FB66AAC37E70C895E
+:10E1A000D9AFADD4C17E8CF4EFE6C8B78C7D21E049
+:10E1B0006D27FFC63887B1FFB5CE33479DC67EE1D8
+:10E1C000DF3AD7AC9C85A5A971E15FCFFE4C2C9CB2
+:10E1D00079A9324F81FE15FB85ADA9EC2FE24F7A6C
+:10E1E0003C3FC1F07FCA51CFB922F59C43495F58EB
+:10E1F000706D3D67AC7B2DFFCF58D7781FEA54DE9A
+:10E20000DF78BFF7B9AEC47FBE1BE727C5799EAEE6
+:10E21000C47FFE5CF4FC199A5EE340793E0E8A27C7
+:10E2200040783FA96BE49A959CF5D6525BF6A15FC6
+:10E2300023B770F6F9402DB5533B8327AD78FEB96F
+:10E2400039AA4EF907C32FEA1767A50A7FE4F855E4
+:10E25000DDAEE3787D40B753DC51FF886EA7F8AAA6
+:10E26000DE0B73288EF40E37ADA738C49B872DF6CE
+:10E27000EF4D15FA7E857CDF680FA9FE15047F85BA
+:10E28000ADE351F2492ABFE9B1105F1C277F2FBFD0
+:10E29000BFBF775C0B3A68BFE38F041DBE087D7E6D
+:10E2A000BDFEDE2262A60CE253C517A94F4A6C09D7
+:10E2B000BE48FD51E67445F5C793FF83EFCD760F59
+:10E2C0008C7A6FAE9E15350FFDD81CF2876A2C90A4
+:10E2D000A3913E35257AC8CF8BC5E3EFE5F93D0E16
+:10E2E00027B951604ED7557F1CFBE42911F88B7D6F
+:10E2F000BE3D55C47383C89EE33A2752756E6B5575
+:10E300009F70E6D07F267E88ED63ACBA8CD6C3952D
+:10E31000DDC4771EBBE90ABAE0F0D2E3F3E76A682E
+:10E32000FF3DE34DFF381CFBC71E5F21FA534DFB39
+:10E33000B2B1DFFAF87DA27FA369BCD983EC19B82A
+:10E340007F6E29F90BE9BE7F27FA759B1D5B15D4FB
+:10E35000039509A8D7B0D54C0A14A6F7C5C7DB2D7D
+:10E36000685F91C0C86C5E17D2C06E15F17465C24B
+:10E37000D020D913ADD8AB13DE2A130C7A77649270
+:10E380009D87DA0951719DDD82EFE1FB6536FF0B58
+:10E39000826FC2C93AEAA5870E960D20FE3891EA2F
+:10E3A000643CE4ED9BEA267D85F0ED21FBFEFF0158
+:10E3B000BEE678F0D59AC53E9DF57925648FF38643
+:10E3C0002179943EFA156A3A3F4F0821EFB0BFEE2B
+:10E3D0007553FEB1C665F190FF7E42F2EFF5B6359A
+:10E3E000328FA1DA051FA929A6F57BB17D5BF2CF9B
+:10E3F00019B92F6ABEA10B913FC0D933745181E87E
+:10E40000137FA86A610FF9E13DFF90E4A1F8F98359
+:10E4100044813F18D2F3D18FF1F97B77E779B6F1D8
+:10E420007381A765C1EC9A0EEC8FB3066FA0FCE375
+:10E43000A134FF4784873BADC191CC878EF549B4A9
+:10E440008FE2058E538CF80FE33CDD32BC7F5C70AD
+:10E45000EDFDC1467665E9648177637FC4B18DE8DF
+:10E46000F1DE24F1DC8007E1E8263E30E0EA8507B2
+:10E470008638398F0022FFD425E38B2E5A8FECA7E4
+:10E48000EA1079DC3F9838FF5245C28AFD7DE74D9E
+:10E490001C0F1A79E02210FB4D3EB54965E003F8E8
+:10E4A0003B51A2965E695CCBF1FD84762D26FEF68B
+:10E4B000B23D9D2ADFBFA9D55FE2A0F6FDE8795302
+:10E4C000651C3F09822AC559933B62C61BE77F46FC
+:10E4D000EB4FBD18FD3C294DDAC3413028324FB215
+:10E4E00041C64D974F66A7101F6B182BA8480F8B7E
+:10E4F000AEC2A4D43E3DD3B011E759499FDAB82D3E
+:10E5000038EBBC8FF669DC880C3F9AF4AA9B5B431E
+:10E51000EE0ACEC2BD3036621F2917061E2FBF2F4E
+:10E52000F038AE23E797D3B06F6E354350EFC3C3D7
+:10E5300014892F0CDF38FEBB7CD1C1F66B62DB6225
+:10E5400095E4D9EA36811E71BE043D11F4087D6C54
+:10E55000CF498DEAAB929EB509D17ECA78B94F9268
+:10E560006750D47A86BF62D0F350EAAC56F263C6E5
+:10E570003B56B1DF9232293B6AFDA293D1F82E04BB
+:10E580009F97E263CF87C071C0C4B35A947F32298A
+:10E59000BC83F963D287D1CFA79C8FEE97A6C9FC25
+:10E5A000562CDDAE854F18FBCB69E97F3F3E5DDE23
+:10E5B000687CA6CD89C667862F1A9F039645E36BB4
+:10E5C000A03F1A1F83578D891ABF617D61547FD880
+:10E5D0000FA744CDCF428319D91FBE755ED4FC91DD
+:10E5E0003B1645F5473F7567D4FCDCE08AA8F1BCD3
+:10E5F000DD6BFE2EFA17843644CD27349BBE87FE92
+:10E600003736FE4BD47EFF53F4AF8DA1FF56D2E7D1
+:10E6100013885EA8370BFBEC19B925A43F5D4D6F3D
+:10E620007C43799B40B1CEF9AAC03CF0D4E0D82F0E
+:10E63000549F427A6E30A2DA847AA3D604ABC81E05
+:10E640003C6A32711ED390F317D3843FF2629AC8AA
+:10E650007B19787B1AED22D94155EA4373FA8E244F
+:10E66000F253549309DAC9FE691ED61FE71C10BE87
+:10E6700019F7550701E7C54A92272D9888FCA8BECF
+:10E68000A972FCA90EF2838EF6A4E6E4CE53849F11
+:10E690002B0E9B4E7CABA6FA0364DFF09CA1E7A196
+:10E6A000BF9FF3DE465849F196D15FE65EBF99E61B
+:10E6B0002FBB7BE6488A7F7B9FDFADAC2C8DA043D0
+:10E6C000E43917C5F1AB0EA409FB67D813C37EDC90
+:10E6D00069D56B3AD03E8C53857D40BB71200DF1DE
+:10E6E000F181F28859F86901339D1FED2ADF27B8BF
+:10E6F000D021DF806D4A9FDDD2BF43E6FA203BDAAE
+:10E700006F7D9300A33844F7F03DE31D86FE5D95D1
+:10E71000CBF8BBEC889E7FF9FEE102AFF720F690C4
+:10E720000EE72CE23C06FC17A55EFE42EAE54ED25F
+:10E73000C711F9EB55BB7626917F7E2E47F8E3C6CD
+:10E74000F3DF493AFF2E4DE5F3AFDD9DB0FE7C04CB
+:10E75000DE2A42AEA87E55E3C0F591F9CDB5C639A3
+:10E76000FC8A46E75827E5A8A2B523F94E607FFE4C
+:10E77000C3345CB772D7957B0ED0FBA69E4C616705
+:10E7800003BCDFD2F780E382A57F8128BFB633CDFB
+:10E79000CC7075A689386109364EE4BB25E803B80C
+:10E7A000A87D63DA2CE23F7C1E56B0BFA015CCA436
+:10E7B000BF16FAB3CC84F433E079673F1EEDCF691E
+:10E7C0003AEF731BF8F87EFBDD7B2A92D80F34D624
+:10E7D00033D64181203FEF3D57C09C49799FE90ADC
+:10E7E000FB17B89F8D9EFBEE1EBC99ECB0B1DFBB52
+:10E7F000E0BFF40EF2C522F0F0BAC6FA40D73411E9
+:10E800007AF9034B2F1DED44BF0D6DA630E585361B
+:10E810009CB3F2BD4A7775CFCB0F239C1FAFF9662F
+:10E82000BF82707FB4BCE7BF0EE0F33B9E5241470E
+:10E83000BEF1D9FD5A7A44BC79EEFE2B2C6FE8AFBD
+:10E840003CFF2429A597AC1E92930FD6BC342A32E4
+:10E850005E484E9F99904EF73B93D2E2DE6FC4C65E
+:10E86000A56B883F597E75F64B0DBE5C2DF972C3C2
+:10E870000BA3F9F986A4DEF388FEF32AE7C1363448
+:10E880005B39AFF18EE487352F7E333132CF578F2E
+:10E890007CA95BA975724BF7A63AFA09FB4E5E1E7E
+:10E8A000CB71ABEACFA2731EBEFA6932F5F7BDF9A0
+:10E8B0002D9F076EBB3EF8BB11799178AE4AEA797D
+:10E8C00097F44AC501AB4EF9AC9203B927EEC27E6C
+:10E8D000652BEA1F3CCF2557C7B1A7291E3BA800CF
+:10E8E000E5B72AC309ACE42B1B9420E5C3D634EE6C
+:10E8F000DD3218FB6BEA161611BB56250B7D5659F7
+:10E90000AF0437B11F3E87E95C2865A3E450EEBF32
+:10E91000E5E378D771B1FE858DB0F63CC69D5DF517
+:10E920005F5E2038D6355A39CF7621296C198CFB99
+:10E930005EDAAB84027A9FDC76B9441CB62AF4987E
+:10E9400085F65DF5DCC211E436761D386D213DB9E2
+:10E95000AAE1B159F2799130FF41968BB5BB9595FB
+:10E960009179ACD5E80E42A4FD42F80213FBEA40CF
+:10E970004E49FA2C6B1A5E43E842BDB6FF6985F535
+:10E98000DA42E2970F0EEFF9DD6F68DF83FF3D9209
+:10E99000F15F747DF8075F80FD8B4AB90F5C3C63C3
+:10E9A000A1F8B2B2C17C21DEFD5263BAEF1EDACF0C
+:10E9B000888F63FDEE2D1610F73FD9107C9EEC82F8
+:10E9C000A3C7B21CE1F9579A80F068CE1ECB0AECBF
+:10E9D000DB48CEC85EB81DC17871F5BE748DF18478
+:10E9E000B1C4FA78F7A021395EA27758289F57E979
+:10E9F000EEB4105F57863F17F7FF8D9FCCF2C689A4
+:10EA0000B75F4E57A4333F274ADE37648C61B93075
+:10EA1000F7DAC3908DE5BE60450FD9A90D07913B8C
+:10EA200014A2B7BF87E00EEC4FD0E97C25073E9FCC
+:10EA3000D811B1CF1FA57CF4E6595EF964AC99F00A
+:10EA4000B9EF93B15A52DFF3AE4CC7AA78799997D0
+:10EA5000D385DDDE9CECBB182D07099E30EE5BD91B
+:10EA600064E77B1494832D2D45917270C7AA5DC411
+:10EA7000E74DAA0725022A1B17FAAB797E9287C8B1
+:10EA8000A336CE0C101FAA4E1FF327FC15F79B28A8
+:10EA9000EF8F50FFCD4DF73F4D72AC396065641E6E
+:10EAA000A4D2D4F1AB1685E8BAC36BA2FD0A81F5F6
+:10EAB00096EAF075703C5594A953DC7B74C22C2007
+:10EAC0003CFDBC59E1BCAF39D5BF358BE87B5CE57B
+:10EAD000F996A32F04E8BEBB6B1C14117CC6797F8A
+:10EAE0003E2E0C2AAEB3B9003CB4EDE6834BDDC438
+:10EAF000BF3FCF38C67E86DD1302D22B35E83F50AC
+:10EB0000DEC79E1F0AD33A0939BE2215F75993EE84
+:10EB100064BEB458FD1ECA273D20FB36CDB78AE03F
+:10EB2000B3A5278AF87BC8F5E5F9BA48FECD746F1E
+:10EB3000E9E77C4B9759F069D70DC07122D7FC4C9F
+:10EB4000A6212FE3CD063BB8AD6A54D646DAD744AA
+:10EB5000F0DBE879D7C1A51E82DF9C2DF93D33910A
+:10EB6000E52276FF8F889FA9CEC0B4626B16E1992B
+:10EB7000F0A6F79FF7A1E47B031FA0F973485E118D
+:10EB8000546FBCFC923FBDF82CD17573AA2FC7956A
+:10EB9000CFD7BCC2297627C6953B9CFF01C9B731A8
+:10EBA000BF95F089EF6FD1FC36C2EF51895FB3C5D5
+:10EBB000A73B59FE7D3AEDDF7BBE41F1CFF78D3C9F
+:10EBC000DF966CFFF79EEFCFF27CE654E4375A2FC6
+:10EBD00019789E39391820FEAB4D82A24DF8F8A85D
+:10EBE0006B969BE46ECB916F8692BCD72679DC4006
+:10EBF00079B1E69B9691DC6F197427F3FF172FE428
+:10EC000016AA11FB24A7177F45E73B2FCFB1C5E21A
+:10EC1000CFA1737C2CCF699C6B49BAEF2FE911F916
+:10EC20002618927E5DFCB3D7B8D794719E47DA61FF
+:10EC30008CF3388FD80D895C7FB657FAE11AF898B3
+:10EC40007FECE0D1D9BFF2C209AA2BA96931C13644
+:10EC50003A3E25B522EEFD925593110C7A6D18B20D
+:10EC6000D335348D3B9FD839AF16E13E080155F8B6
+:10EC700069D1F90CF02A5E25328FF1DA9AEBCB6379
+:10EC80003CE3AF21798DCD634C0E9B965B52AE2356
+:10EC90009FF1DABCB8F98CD119D171514186CEC03F
+:10ECA0008572047F86C28941913783F194BFEA2639
+:10ECB0005B85E39FE39959DE95AE1C9B0BEDE0135A
+:10ECC0004F6CDB3A0DE57084C003F56B88C9F5F134
+:10ECD000EC07F5E6475E1BC37E38EA3D95F3024E2E
+:10ECE000094B0C1D8BD07F1341A5272ABF123EF67E
+:10ECF0006D32F1DB9E54FD2DA24F4F9BCA75280942
+:10ED00005A87C51547EE0E907F8076E09F33843E8C
+:10ED1000B7358A7B4B9BEE653D99E0748E5323E4B7
+:10ED2000242F43D8A58A631F0CB5A02C5D329D4CBF
+:10ED3000CEC7F5D7EDAF4FA634DEDA736F4FA4D24E
+:10ED40009F3B35FF820C3CFF17CAAE5136F25BB7D2
+:10ED500006C7127E42E16CAECF2CD020A015F687FC
+:10ED6000A7EA293C14BA04954FA5715BD0347E25DF
+:10ED7000F15F55589C97F630A38ACC6D54B8DFD517
+:10ED800058934AEB55FDB67910E9AF9732849FF35B
+:10ED9000E2D53CF1BE061ACDBF3FC325992A68A231
+:10EDA0007CE34B324FD97555E579C6FE058D335559
+:10EDB00027F2417E78C711CE8B365975A26FC27388
+:10EDC00020F0D194C07E68D5E1D94076AFDB051E36
+:10EDD00005C7F724F67C44FCD0D36CD5E93E37C197
+:10EDE000B9035271FD3DB21E2C1719B6DED1F7DC06
+:10EDF000D82FA1E997944324BEE07BE5046D074C2E
+:10EE00007744E23B49D859C9577B12C326BA67E910
+:10EE100041DFEF5986AB0F4EE07D0D3873D90EEC14
+:10EE2000B1F45CF8713AC3E5243EC8050127348D7E
+:10EE3000D649AF2638BD7C8E04A7EE0928FDE1AA8D
+:10EE40001A8B8E20CACFA3A4CCA6F4C97755625FD3
+:10EE5000DF86B2B0271BA4FCB76E2B9D16D9478561
+:10EE600033A9EFFDFF78E2F8B6DA219CFF0BA84842
+:10EE70007F3BB649A9744E21572812DE8C42810788
+:10EE8000AA0BB4DBC478EF7CE473472ADB7F9EE7F0
+:10EE9000B13AEDF3B2585EF87ED1F00F1F52C217AF
+:10EEA0006E46D2763EE64BC9C773759A8E3C5C8738
+:10EEB000F3FEB83C342A8CFD16ABFF79E2CF573F06
+:10EEC0005CB1BD80F4EF1EB3A79CF44F47E071F630
+:10EED000CB5F34EBDB22E40E86F46472DD61CC3E62
+:10EEE00055E7363D4EFE76F74145A7FBF46E73CFEE
+:10EEF0005082BBB2E9330BD563561DFC84FDEBB2E7
+:10EF00004CFF5EDA6F526335D7CF4D861D5C3F876D
+:10EF10007A91EB20436EA14F2E9F1DF56C75041D59
+:10EF2000DE93F2063DFE6164BF9AA4BC1EA6381CA7
+:10EF3000DBFD2D770CA7F5F7CBFC80F15E351C19B6
+:10EF40004C78DF04AF716B3CEF0E6A5CBF9CF7AE90
+:10EF5000ED5E6FC4FCD352FE4FCBFD5667FADF2047
+:10EF600078D7B67C6AA1D2C2AAF3A1A114F78634DD
+:10EF70003DC519478FF4CA6F8C3C55693D169A5FA1
+:10EF8000751158AF20BD6B53907E2FBDDB386639AD
+:10EF90003EDF8F3449213B8BF12AD9E3FD66DF60E8
+:10EFA0009A5FFDCED763498F1D2420F07F5F37AF76
+:10EFB0001D467843FE2F4E2439DB0BACD70C39CDE0
+:10EFC0002739C5F7F389FF8BA89FCB7A798FA57D69
+:10EFD0001ECBE57E13905C22FFB33C20FF3BC9DFD4
+:10EFE000CB77A23CF0FBA359CEF7B49BBCEC37A384
+:10EFF0005E1FC9FDE2C5D4DFD35EEA6439A73A8457
+:10F000004292D7F0115E270440D7F2450AF822FD5C
+:10F01000FFBC8C64712F24F1393943D883508E9E04
+:10F02000E2C173D855354A3E22ECA5E84B7B5A9A8B
+:10F03000F9976DBF98465226ED8453DA49FF78D68A
+:10F04000FBFF286DD586D7A72CA8C3736E38A5F211
+:10F05000F86119F785259F1C91F91AB21B7A9AA8B5
+:10F060001FA6E713B04FF5E513BDEB4BC81C4D9A37
+:10F07000B3E328B5537CA11272DBA62D6B3F6A1651
+:10F08000629E47FCD770646E1ED5E3759FB3420243
+:10F0900082D8F06DCF472F221E1E3E8CF88F63A7BB
+:10F0A000F038CC7FE87F0D0677FFF16E45EA91409E
+:10F0B000D27CE2C7AE06B5AF8F8054226353DFFD2A
+:10F0C000A47D7B006DE77F677A0767223ECF0CF057
+:10F0D00073DB7DFADB4C12CBFD67455CDF60F1E64C
+:10F0E00011FF346463A81B874FAD9922EF536485E9
+:10F0F000B8F79C37670A39181580ED0AC7EBAA33B1
+:10F100008874BFD4A07A2DE82F5D84C092A9A46F23
+:10F11000645EF701903F5EFC45FA3C28BB0F90DF30
+:10F120008276EBC15FC4D61178D96F31F25800EB0B
+:10F130004DC45F2B9B14F80FC4C5AA67A2E7AF9319
+:10F1400075F2AB1B771D1B8C745DF35CCC38F92D0D
+:10F150007CFF11E278785D5D743DC3CD99D27F1953
+:10F160000EC3C97F41BE623D61D6A0D58A7CAC602A
+:10F17000144322F69249E00BF52BCB67BE616F8AF0
+:10F18000855EEAB9045CA794BB3B7494EA81A6D47B
+:10F190006579688F299A189FD29825EEA7B4A04A5E
+:10F1A000750C93BCFE59EC7707BC67A9DE6495D457
+:10F1B00097E0C45FCAFBC8D3AF92FEDDEA606C9DE6
+:10F1C000A8C053959C37198235B4EFCADDA2DE6919
+:10F1D000EDEEE8F955124FEB9E3A7D8CD28515A1E4
+:10F1E000987189A7AAC6983A16B138DC9F29EFAD65
+:10F1F000647DFBF5D65BFCD12CFC8DB7E53AC6F8F7
+:10F20000E64C91EFADC463107DD705D520F1D12A2E
+:10F2100025902CFC5E702CC7F3DD67B081ACCFBDB0
+:10F220005FE2E93EC93F7C7E7CBFE219F17DC5FD0E
+:10F230003F8B867F0DF82C83F1F9830D3FB050DEB4
+:10F240003196DF56D599D9FF5D23F113CB5F6B7AE9
+:10F25000F9678785EC5B2C7F55FA956BC02FFCF620
+:10F26000FF5BF80D3AAF91CBAC3587393FB5F60966
+:10F27000C543F9AB6B9DABF73CF27C7FEFB99E3594
+:10F28000E83D06C630BDE7A45D17BD63FDEDBD9644
+:10F29000DEBC26E7052FB766733EDDE0ABD87566AA
+:10F2A00049BF7DF653C27FBDD4586227FFA3FBA49C
+:10F2B000C9A3E89CAF4C2EC0F38F6F5681FC91EE32
+:10F2C000A6E13B03087FE1A9A2C5945F1F7F0AED79
+:10F2D00013DD07B716FD5702DF077BD248EE67B68E
+:10F2E0008D48FBBD83D761FBDE7DB2706739E9E9EC
+:10F2F00093A545B4AE82E3549F5E28ED54F5C94210
+:10F300007B4784BDFA4DA6C8CF6F71FFFE518A1BA3
+:10F3100066EF357B283F32DBECDF9480F015BEA032
+:10F3200078AA71B763ED479EA47551BE28CD8AF3C4
+:10F33000FEE9088D57ED5118FEEEA6B2BC3D643FC4
+:10F3400083AA87EC6277D37DF90F921FD4FC40FE2D
+:10F350007D11FB1D4B15FA66F60D66B6D79D83EC45
+:10F36000BF2EA7BCA87717EB8DCE43FB2CFC7DC32B
+:10F370001E05DC78CE63EEA32F131E3A0F9CB65009
+:10F380001050D270DAD211477F1BED250CF3C29CCE
+:10F39000AFDD61E1FACDFD7FB0D0792B9FFB84F327
+:10F3A0006F6B287E203FEF1995BF773ADAFCAA856C
+:10F3B000F8B4B24E81015991E3661E27FD4AFDCF94
+:10F3C000EA849E36F87F85E47783FF0D795821F52E
+:10F3D000DA7D5BE3F3BBA1FF1E04EF9641B8DE03C9
+:10F3E00075CBB90EE9811DD1F35752FC7A23CD17A5
+:10F3F000FCBEF2A9E8F1D5BD7C1E60FD1FAB47BF86
+:10F4000033F47F2EE4129F5F0EAF18A6A13C7D7DE2
+:10F410007ACD308893AF3C29FD06C36E5F0E9BD832
+:10F42000EEC5CEEB6ABC62217B5BD5FA27F673672B
+:10F43000357DC9F4286F6AE17AD95BC0BF8EF07957
+:10F440004B93DD49FE767987D003F39AACC1A04295
+:10F45000E3A15AA273F761F1BD49E090C2FE1648DC
+:10F46000BDB852E275A5C4E34A8CE306537D8C8C8B
+:10F47000E32B65BCBE3A67D7312A29A994E3EBDABE
+:10F480008E26131EE781D05BF342426F19F431ECF4
+:10F4900050ACBE400B770FD1776D9395EBD6E74B11
+:10F4A000BD35BF0EF596D25F7F740FB48BFCF17E35
+:10F4B0000177ACDDAD6C889EEF1A20FCD8CBD27FF3
+:10F4C0002E1C104D97F21EB0537E7F9EAE7A82FCAA
+:10F4D00056BB46FBB78E457EC3F55BF5E129F1EAE5
+:10F4E000B58CF64D191718FD059467C3F921E70E81
+:10F4F0004764DCFF9F03847FB366B21A20BA46C418
+:10F50000490B0AB3E2C6497309F43786DCF7B371D5
+:10F5100091719277D728E2B77F75EF2CA7BAA6AA88
+:10F520003AA12FBA26E1BA29E4F703FBD15575D6E3
+:10F5300020C53355C82FFC7D1AF109C96393524683
+:10F540007C8271C6EDB4FE42BAEAC4F32F6C44FB70
+:10F550008ECB2F2CFD92F9AB6D843837E26D40BC19
+:10F56000B8C388372AAF0ABFD6785EA97570DC5158
+:10F57000D924EAB51B8E7C33340BE1ED6EFEF3D05B
+:10F58000E5544F3E40D8E786E2D0A75457F4F51E25
+:10F590005B5CFFB557FF2BB52C0F95E68E4CF66BD9
+:10F5A0000EA21F7913EAD1B7BFE038A5E148C2BD6A
+:10F5B00094CFEB5AE11FE6FC1E3A55C326F683377B
+:10F5C000412DB7E41F45FA8D2B9DA24EE941693FBD
+:10F5D000A9FF08F2F583387746617FF937F449854A
+:10F5E000E4EBD510D83255E9AF072AA4DCACCDDF67
+:10F5F000B585AEF663FDA70A294F1831B0BD8CF56D
+:10F600009FFE33865FABDF4E64FFB8BB4D7552AED5
+:10F6100019F1FBAB41E427625C901D275FFB85E499
+:10F62000CF4E797F5C3D4965FC99268BD6F0B710AB
+:10F630008FCC37DDA71D41B26F79875FCD263E584D
+:10F64000BB3BFADE89E8E8E7BAB1A0C84785EC7CA5
+:10F6500017658CBF74F8D531C46FD56F7F3B4AD026
+:10F66000E79B5196F46BC367B48A22E2669322E269
+:10F67000E6FD5A4732C56B5507555F643DBF41EF04
+:10F6800097A53C8126F203F50374E6ABEA26C11F79
+:10F69000A666D1E2FE4B447EC8CCFBF71B2F46BECC
+:10F6A000F91E7B060417F24095B987F9AFEAB489D1
+:10F6B000E1A93A7D397344C47B015A7700E9BFEA76
+:10F6C00075C0FAC40EA46FE7D3F791D89FFF7E02EE
+:10F6D000FB61C7B2B7978BFB2F15487F3DFCF69AAD
+:10F6E000D191F660E200712F0E840737793FBF1089
+:10F6F000FB4B3C6C824532BF20F879AF8C9B302E9F
+:10F700007B73409CB8EC7AFDE9EA662B50FEB9EABF
+:10F71000032BD7197DDDBC92E37EB8EA1F4DFA06B4
+:10F72000FCFE1BA97DF8F0CAD1F4FCEBC3AB6FE47F
+:10F730007CA9B2292ACF1120F8DCE45F7DF5EE5DCB
+:10F74000E47FB669EC9F14B69D7D97EE69F7359816
+:10F75000F9DBD18AFD13760692C8AF2A9C4FDF11E0
+:10F76000ED6BD598FFD0DF32FC2B3BFB57A78AD837
+:10F77000BFC2757C416E8B4E94D3BAA78A8B689AB0
+:10F7800082E3A4D7C6937FE5E8F3B70C783E93F8FD
+:10F79000EC6E49E0BC8B02D982CF604414DCEB1ADA
+:10F7A0005E67FF645DA31AF5FD88F1DE5F06887B66
+:10F7B00087EF0C3E0B295EE6A3BDA25DD7B82F9361
+:10F7C000CEB1D61C623EA9AE338BF13DA205BA077D
+:10F7D0009AC01F4107083F27E811D2659E2538844B
+:10F7E000FCFABDBDF78AB22E2428EAF56A5A87F3DF
+:10F7F000774C975BF7A5C7B34327E99E071DBEE388
+:10F8000059221E8A1DFFAD5BE4418E9F13FAF1F869
+:10F810004CFFE8787A3200C5225FA048FA3588EFBD
+:10F82000ED63E735D37A78FEDD4302C7898F3BF776
+:10F8300026F0FD63A74BE4754BEADB34FA1E666DD8
+:10F84000833281ECD2DA9CF7F87B19EC17919E5C3D
+:10F850001B3EC8F7AF15757B6779E3C0B1DD2DECB2
+:10F86000C33CF99D72ECF87C397E063C19329EDB74
+:10F870004EF73E67CACD4EF1DD9BF8EEF556A9D79F
+:10F8800017DF62663FEA0CE866717F22EE391648A0
+:10F89000BD7DABD4F7B1DF631BFAFD76B9CEC2678D
+:10F8A0006033DD73C47E9F7DBBF40F178197D7EF64
+:10F8B000F75DBDF41363FFFE42895BEAF551308AC0
+:10F8C000F47A08ED0DD75BE426B0DD9E5F3032AEF2
+:10F8D000DF41DFA9EBF23B756A0DFA57E7BEC7F6C9
+:10F8E000F078CBB997F9FB867309901DE79EADCFF1
+:10F8F0001E1A7AE436417779EF51E114301AF4BFD9
+:10F9000084115A647ECDA0FF83920EFFC7754539DE
+:10F91000A045E6630EA9FE07DD195447DDC9FE3890
+:10F920009E80ED219E6BA83CD7506B849DBB3470AC
+:10F93000795C3EEE3B5F6A40D893746E5B72ADECCF
+:10F9400037568414FEEEB0220CA27F9BC2F9CA5136
+:10F950000D2D5CBFB1A454F178855A3C4BF0197C55
+:10F96000B4C026FC03835F7AF125F988C6C95FB865
+:10F9700055FA0BB1FC341ADA67D1FA4BBD8A87EA23
+:10F9800036AFC947CBC6BD4EE1EEB5F808F9D24C4B
+:10F990007A31969F5E73FB1F25FC75B75F5E5280C0
+:10F9A000EB1FCFFD6C28F14FE535E4E84549BFDD9D
+:10F9B0008EC071AE63A9977504F5B98D1D849756F5
+:10F9C00060BFB2D3D5BE6583F0B7B98EA0229CC00C
+:10F9D000F5A5154D76FE6EADA2A13A710CE9E326B0
+:10F9E000D563C77E79C3E952CA239417893A972A07
+:10F9F000BBA8BBABB28BBABBB9E9FEE7DC13F8EF2F
+:10FA00000344D711583A7EB5E17BF83E56DF359373
+:10FA10000F37E17F4E0F354BFC6C68BB923986C4C3
+:10FA200034DD7F88E0EE7EFD450B7D8A5135E6D5DD
+:10FA3000595482D6ECD679DE2D752DB5945636E024
+:10FA4000B7BB9D42EF9A8343D86FCDBFBE7A9BEA86
+:10FA5000836F8C25FBD5D5D236D612C1EF9D1B50B6
+:10FA60006FC7A1633598A41C6BDC2ACA22E9470939
+:10FA7000B9AE6A3E9A49F98B4E92E77C6ADF491E1D
+:10FA8000816DC5DE33C923C99FD92F5A63BD4B4D44
+:10FA90002ACF03AD63D4ED4991F06D66F82E85C48D
+:10FAA0003A001DA31617448ED7FCBFD60717853E14
+:10FAB000E888D207069E4216E0EF880387AD5CA770
+:10FAC00040F73FAE083A6A0305FD6EC2608AE476ED
+:10FAD00032DD7B0F27974F83BBA9AF41584BA5FB66
+:10FAE000E9B02AEAFB86B0BE9F28F7BF490BB750A2
+:10FAF0003DF064795F3A05DA79DE0CE8E1D60B4E29
+:10FB0000FE0EBA183CDC4EB285E7535A2B3F14E286
+:10FB1000EF7BC2999AEB824D7E6F1D87DE7D78D395
+:10FB2000E082810F95EED5443D53EC796E1828FCA8
+:10FB3000BC9BBC420F914B41F5C09320C4F7F9D355
+:10FB4000A143DEEBC73FC7548C0BE91E6F3ABA31B5
+:10FB5000898C8F20CF9F46E751E39DA7633E931981
+:10FB60004A9D049F12CE347D67BFFE7374533528BF
+:10FB7000E5BDEFEBE9FA7151DF3DA8A7E98DF7A9E3
+:10FB80007E59F17AB9BED943DF8D53FC13D63A7B47
+:10FB9000F55936C098812B72064EE8FB6E04FCC006
+:10FBA0007524B1DF8D447C27021723FE2E9251E786
+:10FBB000BB3BB848A73A9165E936FE7B3B85B6A1C9
+:10FBC000E329AF7928CD9F333083EA7DEB46F2629B
+:10FBD0005A7002FBB992BFECE09D447850BCC6F766
+:10FBE0002BC07CD3FBF70B3281BF27B25BC5773EBE
+:10FBF000DB911F6DA92C053AD55FC323253AF9D3B4
+:10FC00005B5C360F7D476C25B8ED7D70D7D8441D01
+:10FC1000488D4DD47918F572B178ADB119794E8F00
+:10FC20008DFDF198EF907E62F3DF42787A28A998F3
+:10FC3000FF0E53DE2BD3DC5C0F25BF7FAA4930F0CB
+:10FC4000506CE3E77DF594EC67D6523D37C259938B
+:10FC5000015CFF783469540AD565D5B4897AEE9A87
+:10FC60008C00EB77B35F617D5FD35AD24AF6E2B284
+:10FC7000C3C275DD352E51071FC880D0F37A343DDD
+:10FC8000A619F4A0FB4B598F64D0655C3A94D07BE5
+:10FC9000E3C2DE91849342DBCB37D0FDC2B87074EF
+:10FCA0007D19D26935D1A9F73B1ECDC9F51E067D58
+:10FCB000907198D99D92EE06BD9CC6DF23F06A51E3
+:10FCC0007F8FC0A0E3F644412F3355E00CE77775F2
+:10FCD0005A37964EFF1BE114C1BAB04B000000002A
+:10FCE00000000000000000001F8B08000000000062
+:10FCF00000FFCB936560F8518FC0F9D20C0CDEBCCD
+:10FD0000A862B4C40C5C0C0C41405C0EC41A407B6D
+:10FD10006F01E9DB401CCECDC01001C4FB81F81F90
+:10FD200010FF07620D20D604E25F407945A81B5BF7
+:10FD3000981818DA80B80388BB805887918141975A
+:10FD40009178FB93841918DE8923F87A120C0CCD74
+:10FD500052F4F3FF60C33156F4B5EF29D03E4E178D
+:10FD6000043FC71998245C50D570BBE03783074D1A
+:10FD70009E178DCF87477F9E212ABF5C0B953F4DF5
+:10FD80008781E123929A0A2DFC6E41C78A460C0CAA
+:10FD90004A46C4ABDF608CCA0F3081D000F9ADB1E8
+:10FDA00009A803000000000000000000000000009F
+:10FDB0001F8B08000000000000FFE57D097C54D582
+:10FDC000F5F07DF3969949662693900D0871028AA5
+:10FDD000A88013086940B4C322A2228E5BC50D26F9
+:10FDE00002D93710FDF0AFFD3210362DD6D0824645
+:10FDF0008B74C0A0C182040D1824E0002EF82FD50A
+:10FE0000D8BF7B5B0C4AC31692801B7EB5E57FCEC4
+:10FE1000B9F725EF4D26806DBF5FFBFDBF69F1E6A9
+:10FE2000BC7BDF5DCE76CF3DF7DCFB14DB2896F89C
+:10FE300063C6CEE00FD2AB2C8CB151DDE96CDBA0F8
+:10FE4000A187FA74E7FF5965D3EA87421EABD06EEB
+:10FE50001ED6FD9CB185547E408C6B38BB1CD3F400
+:10FE6000101B0E8F6DC91696CCD87D6E46BF01094A
+:10FE7000BE742991B1CE1556F7BA0C78AE7A5C08EB
+:10FE8000DFF7C8207750C2F73CC95216E43FA2BA48
+:10FE9000D701CCBE3F23B36CC666DAE06F0FFCC35C
+:10FEA0007AA0BE7CAC6C1063EA699905A07FEA7702
+:10FEB00012A5033436C3EF0078F92D6CDCD0EEFECA
+:10FEC000B913FDEC7380B7E8F9897E5BC0907F09B8
+:10FED00093A8FFECFB4AAA5F6F6FF1F25B6C3E07E1
+:10FEE0003616948DCF3B967FE9C2E78B9B6EA17A45
+:10FEF00018532CD8CF72B7C84FFC5C6396EEFABB90
+:10FF0000F114A27674D8D304EDFE8831E9B5BFB6FA
+:10FF100032C043D556D56305BC4CD8AA867F0C7039
+:10FF2000E95A2984B065979D31C04BFB6A0E879DC5
+:10FF30009A0FCB9FA80518AA28B736FFFC0AC4DB86
+:10FF40005699ADA366FC84F7561BC73B6BE4709EC5
+:10FF50009D83A56B774FC7F70B1AADCC0EF5956E49
+:10FF6000CF9F7A05C0F9FB5486454AD72FD0FA01B6
+:10FF70005C1892EA11EE18CFA8FDE03639B41ECA1B
+:10FF800077B89A936F83F11FABB431CFC5D06F6749
+:10FF900073F2AD8087A2D09649F85ED146C98B2C0A
+:10FFA0003461EBFA37FBC27BA51B24AF15F0525C22
+:10FFB00017CB3C43781FCEC0BFD60639FC63C89F21
+:10FFC0000BE3641948D7EA494CC6F657681E6737F1
+:10FFD0009E8E550E611E6B375CBA01DA81F7CA5EE0
+:10FFE00094BC38C4320B0B205FB66FB74F7BD68101
+:10FFF000E35BA00D76E2B8966A582E3F94BBCDEE37
+:020000022000DC
+:10000000C1FEADD526417ED1EAB55A9E81FEC575A9
+:1000100097318FCDD0AF9A412946FE884C8F019BF6
+:1000200018FB53C498AF1EF94409693719E4A29F1D
+:10003000144FF42EAE934DF50326194B82FF7E002C
+:100040007F02BE823B9D84579D6E73051FE9743B02
+:1000500025E487299DD9C6FAF5F4E74807E84F75E6
+:10006000A59BD25F54A652BAB2D243F47902F107EB
+:10007000E972D16FD758364E81765D3EE646314BF8
+:1000800098E21BA7029CE0E770F2DD01C97396F1CC
+:10009000EBE9136A20176572159BE453FA02AC056D
+:1000A000E6302FB4AFDCE89B389AB1D759E0711C29
+:1000B000FF222950807465AC3ED50F745922811EF1
+:1000C000017C2DC541021E96F4057E063A3D714F16
+:1000D000F6B3B224C69A8870DE738F66503D3554ED
+:1000E0008F0AF50C3A773DC9D3734CF5244F2FD0C6
+:1000F000EB594BF5D8CFAF9E27A68F31F7677A9192
+:100100005ECF0B586E91F3FCC6953C63ACB93F33A0
+:100110004AA89E94BBBD2C00E5659D7F58B34F86D1
+:100120007CC7C6F8118F32231F8DDF86F53941AAAF
+:100130008C7C1497136392A7785F8209EE33B99F82
+:10014000A97C927FA0293F65DAA5117CE970B75E92
+:100150002660E854385EA3FE6AFD34D23BE3FAD948
+:10016000087EA09F83F4CE03630217BBA1DFD8579C
+:1001700006F47F400B5CEE8EC237302E89A562EA12
+:10018000B1601A99BF54E5781BDFFFFBC107E1FDA1
+:10019000724BE7E07880FF4B1AF7218EFB8FA84C5B
+:1001A000816E3132ABC072315646FA6F6946F6B392
+:1001B00041035E970D007E91BAEB5DA60652911F3A
+:1001C0005B821541E4CF253041B07E8C1D6415E182
+:1001D000E085F0FE80BC54C4BF5503FD616C5F83B5
+:1001E000F68752FBADD87E5B2FED5B07E698DAB75A
+:1001F000A51798DAB769D03EC8476770BE681FF088
+:100200003786B1936C3EB56F4D2FA0F6976AACC0A0
+:10021000D47E4C57FBDF60BBDF63FB4951C63F70A8
+:100220008C79FCE945E6F16B7CFC6C4150B41F43D2
+:10023000E397A4201F7F7A111FBF95D7DBD5BEABF4
+:100240000BFF9A04ED3AA45EC63F68AC79FC1794A4
+:1002500098C76FE5EDBB172C13ED3BA8FD78691926
+:100260001FFF0525D4BE660D78918FB4FE31152190
+:100270009C4FD34080524807FA281D92C018E8933B
+:10028000DFB2818487076238DF7D1303FCE6E8D69E
+:10029000A72C041208F37099E0E9E28DE3343E3FA5
+:1002A00007695E9F2DBA3AAB51A6F98CADB4862E84
+:1002B00082FEB637CA418467ADBC3224D37C0A764D
+:1002C00002BEA7B0303EFFF3AA61EB8CE38A4C6715
+:1002D00057ABAD2D06B9EAD2EFE3D9900AE85F0536
+:1002E00032C1A86EB815F434033DFC39E8634C0FF5
+:1002F000ABDC2E39047A9C5D6C949B05DC2E09B234
+:10030000F78740FF7F22FADFAA707CB7CE9342883E
+:10031000FF6F56CCD1509FCDAE8E05A477F7A35C6E
+:10032000D0A973BB3544F6144C07889FDB491419D8
+:10033000FBD3AE1BDE945C303FD6F431BD77370B78
+:100340002D4E85F23397E70E70C3F8EF9A661D21A4
+:10035000E3FCC47CFD2D24C7ACBF2587B1690D2B00
+:10036000D4FE00DC3E4DFDBCC5F0FE1D01337C57C4
+:1003700081196E5743AA05ED994289AD857AEFA997
+:1003800030E7EBED4C9612385D457B3F011CF48560
+:1003900047F7603A021FBB89AED3DDFC5DBD3FE588
+:1003A0000FA92C4CF3714B1223FA2751B9809B8F64
+:1003B0003BB2BFD3559BCF0FFD99FEA04CF88CEC00
+:1003C0007FCBAE589F05ECD9969A2F5564C1C8F1E2
+:1003D00044F67FC6FCC8F1B8359C1F728391CF39B3
+:1003E0009F44F25379E3B85F1E32F05369FDB5BF05
+:1003F0003C6478AFB8EE26135C18BAC3543EBF26EF
+:10040000D7943FBBBAD0943F73D91C139C1B7CD0AC
+:10041000547EC6FC05A6FC7B2A1E31E5DF55B0C222
+:1004200004DF1178CA54FEF6696B4DF9965D97DCCE
+:10043000887254F581CC70DEF8DAD1FA73B437BF24
+:1004400076285EA4C711B057500E8E81BD82697B9D
+:10045000E348B2AB410FE63130A1564BFB83CBC62C
+:10046000A25E66A43F43D2EF83C134C69E973C840C
+:100470003FB94663616061892574F171A76CC86FEB
+:1004800039477E0D08FAC89EF9724BF4E7E5EB7226
+:100490002F40BDD39B3E805F7F9CE73A843D1099FF
+:1004A0005F2231BFF1B9BE7EBA5CE27ABE44AC5382
+:1004B0004A5EEA3B9EB9100E0FAE385B7BF5805466
+:1004C000D49368FD27213F801418E8515C37C82475
+:1004D000DF6DBB65EA5719EA04D0AB99CCBF574230
+:1004E0003D13DE9B7ECB30EC87EF75D4FBAC3189BE
+:1004F000E6F5B6CAC9BF3CA4227DFC941EA99C4661
+:10050000696B6580D2439505947E5E5941694BE5E0
+:100510007C4A0F540629FD63E5324A3FADACA6F490
+:10052000E3CA1A4A3FAC0C51DA5EE9A35497872E0E
+:10053000FDEB17F6B058B7C0036E0F8BB12C82B22B
+:10054000CD24E7DE5494F3538E6F06A3BD7FEA6398
+:1005500060A28CDEF115C96FBDD3D147F64A5E08A3
+:1005600098A74FCF7C7B0CA793DDC22633D0478F53
+:100570005CF49CF7DEA1042BC832C0A9DE9B9C5121
+:10058000EA85B90FE9752E3A315FE7705C67B73ECF
+:10059000FD976CACF77269209F87F7CA340FB3F0F0
+:1005A000B35EA4D70FC59BF4DA9FD25BA0DC892E83
+:1005B000FC35A73348E7486EAAFF5483952988C7BE
+:1005C000A6D8102E8D4FED7BD685F2383755AE3E2E
+:1005D00034B2777C95D667543B0CE3296F34C3A7BC
+:1005E000AAA5C9DC7FE089BB7518F295BBFAD04596
+:1005F00048FF544AF57AE6A66AD4CEB1BA41717C76
+:10060000FE0EF17970633CF12BAC3BA9FC3FBB3F84
+:10061000BDD5A3F787B106F6850DF501E40D3AF7D0
+:10062000FAA807DD95AF343FD2AB49FD06ED85183A
+:10063000F8776620D6AB10ACD75B5E2F07AD97E39B
+:10064000F38DA6F6E03D8FBEA6C7F77AE75B85B5CA
+:10065000EAE3047D75A5F0E714D7D9ABCDF34ABC26
+:10066000092E6FEC5B6D9A67F00F907F562129C8B9
+:100670003F25829B3A14C73209FA976AF150BDE5CB
+:10068000122F576A6BD1021E62C766B433EECDD10A
+:10069000F9CF73FB1F40DF1FFDADCA1EC57CE1D73C
+:1006A00051F56CB06F2DE8E711D0BD0DC55350EF7B
+:1006B0001DDD763DD927B398DF858BA402569D8D2D
+:1006C00076CE0966998CFC7F82FDDE35D2B0DEC81D
+:1006D000B768D49F99CBCCF32CD8672638BFC60C0B
+:1006E000E7B19B9391DFF356AA30B7A05C9AF36F02
+:1006F000B7B849BEF259C5125AEF083FD8BD6EA629
+:10070000F407B92F7DE599ECDCA1E887E0FA5BF707
+:100710000F1426703BA52831A4F920FF8B86913F4A
+:10072000B982E1FBA125A8A7824EE65DCF7AD2EF80
+:1007300087F63FB2BFFA7CD2C34F21FA21D749BE18
+:10074000509475DAC31649D85B414A978B71EB76A2
+:100750006B4D045C1B01D747C07F37BF253213BFE9
+:10076000A55A02359624CE5F682F484AA716F84747
+:10077000EA4FED517FED3FB5FE34A83FDB547FFDDE
+:100780003FB5FE0B7BF4BF295AFDA5AF6CDA16040A
+:100790007D53B479958BC13C7454A94EF602DD4B60
+:1007A000D62F76211F1C51822EE4E7A321797234C3
+:1007B0007EF8D222FCA2CCE790705D857F42FDC717
+:1007C0005EF8D954B4E7BE59AFBA69BD54670D5B42
+:1007D000414ECB1A0AA7A0DF17E0831C5E7A52466F
+:1007E000B8D1CC9F45CFAF4A46FF1E708A584F8480
+:1007F000C95E2AABFDF3249C87CA5927C959E47BFB
+:10080000D8FEE904D28FB95A5CCF7CE827D9F9E544
+:10081000022FE50D3F3B29BB30BDF630EA13B04C4B
+:10082000C80E8F7CAF40D841872CCEC4565842B1F9
+:100830001FB11FA1DED4F1C242DC0EAADAF0E4F04F
+:1008400083D0AFB6DADFBA2403BE74793B553FF3E9
+:10085000D7AF7A7AD7CBED62BDD7FD5E88DEF334B1
+:100860000AFBAD89A7256AD885F671C95AD51B84BC
+:10087000C7259B9E7DEE695CAF7E62F55E04F51731
+:100880006F7AE3C33100176F5113A7F06138A4E406
+:100890006EFA94C3BFF923BAE951F4F21B9A6718B0
+:1008A0007FFE7042375D8AB7ECD6D8B09EF898507C
+:1008B000BF5B6B7144A14FFDC1496867556DF85628
+:1008C000C375E5D15D124BC98882CFB56F90BD80ED
+:1008D00078227A0A7A75D12FA27C39D005F57A244C
+:1008E000BD22CBBD81FA6514AF17FD93C0DF2FBECB
+:1008F0008A7EEC4FAD5EC443C18BF7B9703C8795DF
+:100900000ACEE7CF2C4E463F7D811A4C7653CA9FC4
+:1009100017ACB99FF82FFFBDFB93F9FAD0D7D74298
+:100920007355B02F8E73F6EADB689C792C407C58A7
+:10093000F08CEC0F41FAB5C2266F892227C5329799
+:1009400093C3EB80B830CEC3B84E41BFEEEFE5D0D5
+:100950007AF28FCC61A80FEED7FDF16C2EC15F8BC0
+:10096000FD8471B2455FE7DA4CFC5BBBB419E974F6
+:100970006C802F05FD6AE54C090A7C4867A05EF98A
+:10098000BDAB53389D9847C916EF815D30019F6319
+:10099000F966D5671F6E7A8F9DC9E86E7F9E681FC6
+:1009A000FA1D83F3F9E16456501F657C35B2AE073A
+:1009B000605E37F09941DEB9FCD73EC2E55D97FF36
+:1009C000D04D9331FFABF7B91CE17B385F42BFC21A
+:1009D0002994BFFB5689F4839585A3C979AD2AE490
+:1009E000DC9C1FC92FD07F458A33F00DB69340742D
+:1009F00020BF5ADE4A78DFA857B15D57CF7A7539E4
+:100A0000CE17FA204F067D7059B73E60ABB91EE88D
+:100A1000DDEE0AF2F59B1A7AEE69945F90D7A00793
+:100A2000E557F5E3F88F6FDCFBE19D20B7C7EB7569
+:100A3000B935EBD548B92D7869BD847C1A29B7C77B
+:100A40000BC04A8926B7F03CAADC16B4FC4BF4AACA
+:100A50008EC7C765B35ED5F5646FF88CD49397CA1B
+:100A60009EA87A127EEFB3EC9EFCA8F3A1CE7F4540
+:100A7000BF29BD80FC093A9FEA7CD8C5A73A1FF67A
+:100A8000F0CF98F018997F3BF2040CC1BF5D257F31
+:100A9000624913DF8F83F7DEEC9F45F8F2D134C74C
+:100AA000AADFEC9F68844311707D44795F04EC8F6A
+:100AB000281F88802B4CE54B1AF76A8CF8206C2A8B
+:100AC000679DFF2BF6459475AC3E0F95379CD482FD
+:100AD000C81F699D1AEA3F752198A8E83FDC299351
+:100AE000FFB00370BC04DAE9D898110A821E596C71
+:100AF000E7EBCD0E77A72B01D2C5F11CEE4CD296B9
+:100B0000A01ED49F77DAB91FA4C3DFE98A37F83172
+:100B10000E36C9A4C75B426C72343F09CC3484DF03
+:100B200016D65B3EF78F76E0BE33B687FBCE40CF5E
+:100B3000AB6547FA7C5CBF56CB5E6023366BC1ED7C
+:100B40002E74A177340DBA711A3C9FFDB6CCB76DE7
+:100B5000823EA5AF61DD7184059F182BE17EDE72B8
+:100B6000E29F994D7C1D326B7974792812EFE5393B
+:100B7000E669A87761FDF0B9D10FACD753B03AE27E
+:100B800079D3F5426EAA693D58546BCE0F88F5D4DF
+:100B900037BAFEC96499A47F70A184EB7AA1B7AF7C
+:100BA0009687DE380DE8D3B14F66B8BF7AAA4926DA
+:100BB000FA9CDAC8F753593089E4AF8C7592BED4E9
+:100BC000F1D686F27571EF7AAC6DEB9FB21F423EA3
+:100BD000DAF687E1BF82B46DDB27837720FCCA4752
+:100BE000E97F603DCB4FD865273F73C72E27F17F44
+:100BF000C7CEDFA53F84F0762BF9F73A767D3B1C14
+:100C0000F9B163A1B500F560C700BE7EAADAF9EDBF
+:100C1000F0169A7F17111D33148DE87DAAE92F076E
+:100C2000302EE054138C0AED8B5DB1245FE5AFDA12
+:100C3000C91FD1B1F3DBEC80E39F379E32B1FFD304
+:100C4000E164D35EC2FEC573BF79F98ED1CF2EC0E9
+:100C5000FDF186DDDA4CC89FF0DA5F87A37EED7880
+:100C600089DB4DED6ACB1ADCDF18BA485EA802BDFD
+:100C7000DA51C8FA31B66FD1C4F128473DF1F257C5
+:100C8000F2B39C2F3E26287C3DFBEF8F0FC9C7F5A2
+:100C90009F33649370DCDF1DF803EA895D56E24BF5
+:100CA0007DBCC7EB17903D73AE71DFFB3F6EDC522E
+:100CB000F87CC6BDE0DF9CFFAD8A87FA1729073DA7
+:100CC000F97CE703046F727AA9BFE7C9EF6BFFA74E
+:100CD000D1FD25A0BBEBDCE30EFF3F4BF7B7A70B25
+:100CE000BABB313EA0FCB5BF52FF7EA89E6BF93760
+:100CF000A77B6FE3D7EDFDB72C9EF733A1FC6456BD
+:100D0000ED40C3E2DAD23D6F6742EE5B697BE3B14F
+:100D1000BFE323F67BF4345EE5FEB6F1B8EF03EDF6
+:100D2000B27849AC17F93AABBFB02FFACFCB233B1F
+:100D3000A47FDA63644F30C5B312F72BDF4A9FE913
+:100D4000A5D80B36E2E300C2EE2B056C5E6FFE4ABF
+:100D5000623EDC4AED9F7EFD3EB473D3D264B28323
+:100D60002125FBF775D764FEBC4433AD87AEF598FB
+:100D7000D7479312CDEBA889A2BEAB19EFFFD50ED2
+:100D80002914023C8C1FF0CB44F4A78EBF48651297
+:100D9000C093586011AE3B263ACCF59DC07D6C8364
+:100DA000BFF1EFC5E3C42E3C0E5CE9473C0E90C991
+:100DB000AF7A4E3C62BF096F99218CC7618A97E375
+:100DC00031A1D44B7E6AB11EC76EA21DA3389634E2
+:100DD000A33C2BB89EE678A075B8BE9EEE0DDF4C06
+:100DE000ACCF15D1A48E7F254DF6D9CDF5D1FA5CC7
+:100DF000A7CB0FA5874EC77F942EC9AA992E698EBF
+:100E0000390ACAEB645C3F8CC4F2991C4E0B2AB4BD
+:100E1000DF24D60FD778E628418027A4652A48AF7B
+:100E20007CDBF6228C1FB57925EAC7C56D169A1FA3
+:100E30006C5912E17D488D42F07B16F728A4F7D457
+:100E40002B5E39FE20433FBB4FE306BA9FEF977CF2
+:100E50007FE6CCD86CF4C7F01FC67FDE00EBB75935
+:100E6000AB593806F0345B61C1B804F4934BEC73B2
+:100E7000939FDC0CE3EFAAE4EE7ACE55BE37BDF2C9
+:100E8000CF4E5F013DF6F9458C6DC7946F8A28C639
+:100E9000F5F68F9A38BECAF7B3D0401E8721FB0DF6
+:100EA000FB8A2FABDC3FF3CA1F5F1A89EBDC711D95
+:100EB00043E3B87ECDE271A962BD708A79E2BC0ECF
+:100EC000D4AF83E268BF749FEC8C16E7B841ACBF27
+:100ED0007F83F1289076D4B26A19D757AC93FCBEC1
+:100EE000C15A1B5B1F251E668D6A117E224137F891
+:100EF000C9D9B87FC3DB9F0DAFC619E9D636E5A8BF
+:100F000032BC271DF0F7B961FFEA1FC52FAEF711FC
+:100F1000BF1BEC2D93FC51F447BDC0DFD43DDF91E6
+:100F20009FF4D2A6B516E4DF4B6B2DA6FDD83A553B
+:100F3000F83146B011D8AFA97BECCE2CA4CB3ED96A
+:100F40008BF1A5E54D27B540947DC4487C62FDE852
+:100F50007F6F55DDD4EE0EB57E26E275C7091BC343
+:100F600075F576ADBA385A3FEFB4F27ECE66F5F736
+:100F70000DCFF8F7C3EFB80E47783CAE3F6B99F052
+:100F80008344F21F233E3E55C74238BFE27A15F52F
+:100F9000C2A98D8CE67740C963B8FE0679FFB1D14E
+:100FA000AF7371E396DFA05D50D624B9714BA24CAC
+:100FB00069D1D08F5BDE182FE33C9CE9D1E36FDD74
+:100FC000C36E35C845ABAA10BEF68ED97117B6FBF5
+:100FD000659BC6D04EF1BDDEE9C279FCCBA691245B
+:100FE00007BD8DEBE54A563411E31C843E8CE48743
+:100FF000A11B634CF01572A01FCAD7546BCB3C6F7A
+:1010000014FA2DD324B18F789EFA2DF4FF997E7BAC
+:101010005FD76F01D96F9023BFC09B41BFA544D359
+:101020006F73254F0AE27DEECE412948D7B96FABE9
+:1010300049D1F4DBA64ABE2FBA59C44D7734807E1D
+:10104000BBDCA0DF1A40BF45891F19A3E97EFA73F4
+:10105000E8B7D0BF46FE36A17E8B32DE1B04FE749D
+:10106000FD36BCE920E9B7E10D16533CF0444DF8DC
+:101070009B7AD56F52D2AD681FEF53BDB151F8675F
+:1010800093B0C7378B38466C07F55C95F6C3F45CB4
+:10109000DEF9EAB97F119E753D37772BA3B8E89E3C
+:1010A0007CC8F5DCDCEDA0E724E447AEE7E6EE64BF
+:1010B000DC2F17A1DF86F4D06F8CCA9785F9FBE58A
+:1010C0008D194FDE0DF58DF0A95E1B941FD1ADEF8C
+:1010D0004619F55D95D68BBEDB777EFA6EABD07781
+:1010E000A0C706A27E8DE40F6F9339DE7CC7E8C3EC
+:1010F0001B5F4679F99D4CFB92EF59F8FED13BA35B
+:101100000F67217F7D2AFAF3A2C6E9D95E19A4FAF6
+:1011100027BCCEC757BA91FBCBCB1AB87D58562BFC
+:10112000873CF0E7A431DF69D8FFC29D124B01F87C
+:10113000266BF5130EB4EB9F5799581F4DC934F029
+:10114000C3AC9C62F2FB57D95DEBF0FCD12C85D986
+:10115000D0BF5FEC987414EDE0E21CBE1F502C9ED3
+:10116000EB71B0B3BBF464443C48E39C37FBB39EE3
+:10117000711653AD9CAE539F954218B7DA33EE22E9
+:10118000447AA1B8CEFCFC5D217F37C92D842FF6AF
+:10119000AE1C35EE432FD785A77D024F8017139ED7
+:1011A0004252543C01A5A7642677E3A5F0772D4B66
+:1011B000705FA0F02989F69123C7ADE32D72FC3A48
+:1011C0001E753F77B1A82FBF692D9D6B8AC48B8E8A
+:1011D000E7487C74E13D021FEF695D7EED9118D711
+:1011E000047C437A26F89F801768C73FEE22D3F924
+:1011F0009B8F045E46568F9B80E10F37611C3AE45B
+:10120000E7D5CC79B32FE063D4C79E11389D5E310A
+:10121000C61AC07DDA0DF64ED2833A1F0EB3723E67
+:10122000D4845ED9D1AF623CADF31B2537DA21E51A
+:10123000613BE1B51CF8D10E45F63EF5CD24815752
+:10124000379DAF6A14F313D0C182EB267DBE0AF13D
+:10125000F358239B385DCAEB385DB25827EDC7942D
+:10126000D548DE308CA7AC710EC5A1EBFA197E0E05
+:10127000239DA2F0AF128D7F193A9BB3BBE7CD62DD
+:10128000516EAAB5FA43DCE7990AF2B196D810FE7E
+:101290007716FE3E57FC5024BD2E1378DB847875FC
+:1012A00020FE3AB9FD15FE8ECE69E9F9E54AD084F3
+:1012B000D7094F9FE6FCB753F2A05FAC0B6FC8CFC6
+:1012C000903F4AC71BF233D2A1295746380FF0DDB1
+:1012D00027A3E77871BFD428F7853B0FF2FA9F91D7
+:1012E000BC2CCAB87F307FFF40BEEE4DDE8759C5AB
+:1012F0003A41F0F73BF6CEFD2391BF774ADC2FD180
+:10130000146FDAF7BCC1CAD74D1BEC2007B8DFF663
+:10131000B6EA5DE7E9A91FAEB27239C0F584C7E04D
+:10132000F7BA040782F1A675368A17A47E0CE4F694
+:10133000AA515F6FB2B3A45BB37AAF7F8AA8BF37FD
+:101340007B498787617BA8471BA1BD21DDED45CE89
+:1013500017BAFFE05CE3BA43F0CFDF3B2EBD9D1F21
+:101360001A4F55CE9A695F4C8FAB4AB5045E51D186
+:10137000BE9B2C99E2B7A0E782CEFF70FDB76AA3AF
+:101380007AAF9FA5DAC88ED0CFCB5E2D3B5810F038
+:10139000F6A54F2579012BE383B1387F8C8779102F
+:1013A000922FF78FFAE86ECA97699FEDC6DFF5298D
+:1013B000C57DC81B790C1DBB315322FBE13DAC6CD4
+:1013C00034DAE136E6B38A26213FE747F1213CD7FC
+:1013D00092595B3DC103723DA22E5485A9774267A5
+:1013E000E23B48AF7132437A35FBFA4CC0F9F7BEA5
+:1013F0003FB34CDC8A073B81EA19B18F2561B931D3
+:10140000BE245ACE8C6EF8EAFD5BA07FA3F7CB5EBC
+:101410000F94BB69AFC381723664B585050C78192A
+:10142000C34255E8771A7DC8770BEA8302B07BF098
+:101430007C4941D3DA2A17C2AB257ABF3C1898E41D
+:1014400082FE6DAA3939E932D40B500EAB295FCD3B
+:10145000CB95D74A5E0C71CE6B5A41F14879B512E3
+:101460001D60DC1492988DD71BB241BD9B56C3FB07
+:1014700059387FC1FB586FEDC9F76F41BD03FDA41B
+:10148000F737F2FDFA3C78CF8372523B87EA2B5C48
+:101490002D313C0753B091CF4F05FB552FE637EC6C
+:1014A0007E8AE6DD29D05EDF0C9C8FC213E93CD139
+:1014B00048C94DE7381FBE80F456070E185FF0A5E7
+:1014C000F3F80949C062FDA3DB7FFD6DFC5C539E10
+:1014D0007781D607EA79272729C342FC7492F6E17F
+:1014E0000F01BE03569C37793CCBDE9C2FB416C34C
+:1014F000FC98631B44EFCF6A1C47711EB3999FE2AF
+:101500003CA68EE676E7BB57DA43E8EF7B57ED4C17
+:10151000C3E77BAFB4D2F3F64D5C0FB70F6821BFC2
+:10152000FBE1D52AC3F32F55AB65D2138737AA74D5
+:101530006E577E86C737E46FE276C8DED5BCDEC361
+:1015400075DC7E9BF0CC6D93701ECE5FCFCFF9EA39
+:101550007A5A5F87E6B90B4DF35BA49ED5F570A967
+:10156000C04741F55ADA4F8FD4BBA5FA7C18A16F5A
+:101570004B719F9DF6D3C32447A5F591F1658E6EFF
+:10158000BF0DF243F83BE2EFB2FD2AC3758DF4457F
+:10159000DB248A67C3F91EF24737493E8C7B28F863
+:1015A000D81A227B3C943BE33F709EF9C4CAF0C832
+:1015B000482BD203F4548EB5F38FBF84E747DFB3D3
+:1015C00061E410F04F2EE15F8F13CE5ACFE37EB26D
+:1015D000DE5B998CE78DD9C43EA407F26B641630AC
+:1015E000E88DA392EF963BF9FCE046FB47A76B968C
+:1015F000569D87F36C918DEB47CF7A95CE8BC70BB9
+:1016000018D60B3EB4770AB7AF48D60CFC50B87367
+:101610004532A80EB644C4CB548973E6851A6FA729
+:101620007097E45E6B6847AF47AF57DBCEDF1BB404
+:1016300093A7BDD55F88FDA3717EADA1DE88ACA761
+:1016400047FBBDD493F35FA757E2B9FF9C77650AC8
+:1016500076CFF962CA20E33E8F9EEA7EE6ECF72D54
+:10166000CC67C05FCE1F6398CF40EF865120FF400C
+:10167000BF1B1AB93DD730EAA0569A45B01BE5BD4D
+:101680004CF8A3CB26F2FDBB86CCF716A1FC4FC9C4
+:1016900092881F5830A0F54924FBCD83FB00F959EF
+:1016A000FCFD7C781FE5B2E1292EA7A02F3CA84FB6
+:1016B000CA56AF9844E56B250FD6DFB03697EC924B
+:1016C000821C99517EED41B2930A1A0F26A23C83E7
+:1016D000FCAE447BA06CACD58DEA58974B5DCEDF59
+:1016E00015E76199CD3D0CCF77E0765834F996F740
+:1016F0003361B772B92CCFE172FBEE261547783E05
+:10170000724E72ADCBB18C729CD52DC77B574FD02A
+:1017100050AE0F87248AA399807A00E57C831EE768
+:10172000C4EDD8F395F373D999A520BF385FEA7259
+:10173000AECB75A43C372B2DB7623FEEBBD24EE348
+:101740009870D5F60FEFE3FA8AF65F275CF5603202
+:10175000EAC73C85C779E9782D55785C608F7EAD06
+:101760005CA0F53D9FFE45F4E333ABD95F126F8B70
+:10177000E7F1EFB52AF1FDB9E4B3879C9DA77C9E04
+:10178000AF5C9D4B3EF5F6E59DE67AE2916947F543
+:10179000ACAF1DF018063CBEB5F1598A0F3EF1C240
+:1017A000C1A94887E21DC0E7C85F1B9D2C8C7A4EFB
+:1017B00009D1BC55D420D33903A684B36F711AE57F
+:1017C00098C775156F76123F15BD640D4D81F78B67
+:1017D000B67D319CE26A167652DC5AF005612F071D
+:1017E0005B86A31C14293CBE2C522FFCDAC6EDE705
+:1017F000B6EDB1D3707C521DBFDFA2A8FE76D56ACC
+:10180000D8A778C2A652BB508EF67983C0C778FE9F
+:1018100017FB67BC57418F2B6BDBC0F54451A31AF4
+:10182000C27B328AEAB6B463BC71D1C756F27F95E7
+:10183000D79DA4F31413366F22FF4A79A36CDA8F75
+:10184000EB11DF592787AD1897D8504AFB90001F3E
+:1018500024B85EC453FEC0F8C3E2CD3BB705018592
+:10186000C52F3FEF42FD72AC79BD0BF10EF59E35F1
+:10187000DEBA473C67FD23229EF386C3746F4B2F6D
+:10188000F19CC7F00F1094B76DE6784E56D787ECF1
+:101890004BE867B63FCAFE47977DBEE9EB35781E39
+:1018A000A1EDA5E36BB0DF257FFB720DC689B15DAD
+:1018B000769AF7CA5FF880E2B7F5F7BEB0097FC83D
+:1018C00086E729FEBDFD13AB176B6BDF79381DE38F
+:1018D00006DBB77C978CFECC793BAF267FEFBCADA7
+:1018E0001352589479434F917F43E7117F1F49B7B3
+:1018F000BD0D7B299EED04D01DF560579C6E7D29A2
+:101900008F7FF688F8DC8DD1CF3BF488C76DB8E5C2
+:10191000C62B51FF37707BF29C71B9EF033D2F3F0F
+:101920000F3A6E14F1D7F5379C352EF704FE01F40B
+:10193000B2D8CD74FCBA61F6AF9FC6BC863EBDC6B8
+:10194000E586CF037FFA798A776C3EA71DE5E8A587
+:10195000DF503C34D26F8A07E7A3AFD3F13CCA1102
+:10196000B5733ACE3F9D3BAD74DF4FD1CE8F489ECD
+:10197000DAB7BE477E6A26CE35B4B3AE1F8F3F9727
+:10198000C4786B9D3C9E57D001E37D3D2E7A2EE2BC
+:101990007A395FEBF1BEBDC5F95E6D1F28EE0FE031
+:1019A000F1C8A5B57F10F1B3DD749372905E07CFD7
+:1019B0001A47ADE3C12DF472771C7BF4B8EAAE3858
+:1019C000F608BA213D719EEA8A5307386D04F94939
+:1019D0003E8A762EA27D2D8F7F6F57A39F37D6E349
+:1019E000DA7D11F4D6C7DB9BBCE8727BAE71FC508C
+:1019F0003CD16642524F7CB57D1F5DBFCFB44B7F5B
+:101A0000D7FABEEBBC548914791EEB5EE4CBD286C8
+:101A100083E4CFEC5A7F8BF1B609FF7BDB0B32C539
+:101A2000392FA9DF4BFA3D527F94E1BD2D51FA7B4E
+:101A3000BF5DD8E78D7CFE687BC91972403D6D7B28
+:101A4000B6135F976D3C4871D66FD6BDACB518E242
+:101A50002770FE0819C6D3F6E2EEE1A4CFC5FD302B
+:101A600091ED548976CA9BA2B753BEF1A4A99DE219
+:101A700060BDE6769CBBBD638AEF76ACEF5833B7AA
+:101A8000138FD5CB9343D1F669ECAAD8EFAFE629F3
+:101A9000CCA3740F8E93DF7B23BB62C8EE9CE7CC94
+:101AA000F9382E11538DE2BAAA168838B09F7A53AE
+:101AB00091DE55CEEB18F67731E2D7E0FF51DD012C
+:101AC00086F6AA9AEACF42BF43A4DED1122D2C6437
+:101AD000A0F73CE7E4140FED8B84D3909E07320F00
+:101AE000AB58EF6711FEABCF14B62405FAF7595087
+:101AF000F22E807AD9F75F0CF03B7BD6AFC381879B
+:101B00006593BFA9CCDA7900D72BEC353BED47C8FC
+:101B1000BBEC747F48F91A3B8D77EFD66F9F23BBE0
+:101B2000FBD756C6F787605583F796B9791D87B7F7
+:101B30007EBBE62F6857E3CBD07EFE1A288FEB8959
+:101B40008DB1B4FEE978298EEE51CB7FEDA1A9A825
+:101B5000D7F263393FE66F4E0955417DAD491C6EA2
+:101B6000DD3480EEAB287EC949F1A57BB7BE528635
+:101B7000F354FBE6580C3360EDAF09FBFF37E27E10
+:101B8000AD1AD5638C332F648AC7782EA818615399
+:101B90005C13233F06C911FAB11AE3E83C11D8C51A
+:101BA000A67A4EA89D0F78898F83FDF839AA703FD9
+:101BB000D40791E5F4FCFD767E8EBDDC0AEF39BAE0
+:101BC000CB976B9D791CAEEEC7F5493395FF44E783
+:101BD0007391DFB35E5EFE23BDDEAE7AF8FB65E295
+:101BE0007E9B48FE3DD4A557FE7A71B4FB5BA2F400
+:101BF0009F9EDF2FB1A005ED962D76BAB70BEF674C
+:101C0000C0730EDB34BEFF55E20AD3FD393B843E80
+:101C10002E8909D37D3EFD443FB03CC2CCD6F22292
+:101C2000D2BDF4153BC3F8B3D2D79C3EA477E9B636
+:101C30006F5B7F9585F18BB1E4D72B7DED7F111F15
+:101C4000945AC3D3E9FEBC2D5686F7E7B56D793BB0
+:101C50001DE5B54D0DA7279C655FAFB4DE6ABE5785
+:101C6000408CE35865E842BC77413FAF5BD48B9E24
+:101C7000B93286DBD7F6189F3586E4DD7C4FD4B1C8
+:101C8000CAC641C6F3FB459EE87AB17F8CFA8F9DA8
+:101C90004377F438F7DA3F2609ED99E66474409605
+:101CA000813D8EFABCA8EEE430F41F7C16A3DF6FF2
+:101CB000E089C3F9E833AD7318EABFCFD23B871987
+:101CC000E7992395368FA2925F87D28EB527F3FAD4
+:101CD000318C37B54F8BA6F786C5C412FE8A1E8E8F
+:101CE0008D7A8E7A4C0CE7AB34681F536C17E54342
+:101CF0006FF7332D447AB831C6C3EB490B69F8BC92
+:101D0000B86EFB20231E0A956A2A07724AF82C64D3
+:101D10002BB52C83FED6DB2B9CEFF028743F81F291
+:101D20007FBAF855EEA6333991318E51E014665CD6
+:101D3000F233EBE74814D56F43FC69CCEF5664648B
+:101D4000956A92F718564FA903CC2E7E5F5A054329
+:101D50003D7944ECEFA31F0CD36E7C3D487A3F38AD
+:101D600080B18B32F0BE094F9CDB80BF6B70B33EFD
+:101D700009E3692B18D71753DC688F48C1003B0370
+:101D8000FC5455593788DF03C27C182F49262CF4A0
+:101D9000CFE57EF33BB483804FF93D8457B15015B6
+:101DA000A018C386C9EF3A9EF1FBF3967DCC8CEB6D
+:101DB0008F12410716DC4D7ACCC1BA7F9D00A35A21
+:101DC000457D5B15F7B71CDC9F73B85918EDC358F8
+:101DD000070BC742EA18AA1C33CABF2B0B60035F6C
+:101DE000BAC79AF323E502F45A44BBF5843FA8F737
+:101DF000AB887ABF8AA8F7ABB3D5ABE3A9DC3628AA
+:101E000003EFA5585C592FF0C6DBB309BC017E86F1
+:101E1000E03D7FCC12E315FBE684D718D11B2B964F
+:101E200007BA6E8EC9207EFA59DCAE4E8C97668951
+:101E3000350CD7C38B24FDBE4FE67718DE636E1BCF
+:101E4000C9E123A29DCD02CF8B74BF558FF276B22C
+:101E5000BF7A94B7F7563E267A79676FFD898DDE93
+:101E60009FF85EEAAF8E8D5AFF0FD54B65AF7DF4BC
+:101E70000EEEEF76E92737A0DE6C676E46FD541A4A
+:101E8000DFFAB7167AC2ED4C5B9A99DE31C8DFC033
+:101E90006F31179A9F47F24914FE72F48571DF295A
+:101EA000DABBF3617E5E4DE7835C31BE89B57C9F12
+:101EB000FCEE79DC8F07CB461FE6DF25F2EFAEE1C3
+:101EC000F6E3DD0FCBB40F1B79BFD5C1FFCDEFE13A
+:101ED000B8071F80BCDD335F0A8533A2DDDBC5DEBA
+:101EE0008F877A6788FE44DE8315609E49CBE4685D
+:101EF000F76071BED4CFE145DE7F318BF9C5FD6659
+:101F0000E6E759316EE2DB2225A4550FED9EC7822C
+:101F10002B80EFD1FE04BEC7FD2F599CC7662E8DC6
+:101F2000C7D7DF9A60D27FA78678E270BE66AF8B94
+:101F3000E76EFE7CEEB59E14E37945E574ACE91ED0
+:101F4000A02AD59B8AFA4D3D7D3DF3801C6AA707E8
+:101F5000318F211FEC56127E0CF3243D95AA84503C
+:101F60002F2A6E3FCB47BB379EF3B35E5E4BBCAEB2
+:101F7000CBCE7C17FE1D46E681FFCF5DE1A1F3DFEE
+:101F80005739FCA771FE955D39DE80A3273F04B762
+:101F9000F27157E1B8337A8EA74AF37AC9DEBE0EE2
+:101FA000E645F2CB796DD83FD9EAF9C883FDFBADA0
+:101FB000CAD00FD3133FDE2321C83F15EA4F712447
+:101FC00072DC94C1D8FE72BC6F14F4FF3271BFE8AA
+:101FD000A24A26521E57B708EF1FA53447A43E91C8
+:101FE0004EA6728F8A7B4A97547A29D5F16BF356A5
+:101FF000D33D98B60B79FB36B7A05FA245E02F40E2
+:10200000F6972DB582F61DEDEE8A30DE27C7D26039
+:10201000DEC161B9AB09BF9A9B91BF13CA136C456E
+:102020001852B5660AD1497157B07CC84F7504067D
+:10203000C7A27DE331DF87694D1D71D6FB31BBF847
+:102040006D13C7FB6312E7B748BC3FA6367B306E03
+:10205000E2B16BBBEEAB22BCC37288E3FD3FF97EFD
+:102060006E4FBC374F9B69C0BB337B32E1FD6702CB
+:10207000CF4B055EAB041DAA043EABC4BDAF55E219
+:10208000DEDC2A81DF2AC43BA48F887B7B17233DBB
+:10209000209511EFC0BFD6A14126437B7C0F0F5284
+:1020A00087E05BB785FCA4B2C3EF43BC5B1339DEAA
+:1020B0006D0EA003F135E0DD83F941C2A7EAE078B7
+:1020C00086F29C0E025610EF23F139A707E0FDB609
+:1020D000D824D487634C78D612C79F1FDE9FE2F3C3
+:1020E0005BA290F348FC256AFC5E605DBE7BB38F0B
+:1020F000AB445C7695B89711F18876CD2AC00FBBBA
+:1021000098E3933F1F22602FA54962FD5F0574C0CD
+:10211000FC27853D8478C674672C5FB7245A2A76DD
+:10212000AB88A7047EDF0F4B0CB2B46CC64380F1C2
+:10213000971A641E84F5FDE15A33FFC86E25E27ECE
+:1021400049CF93C86F2BDF562DB87F2FCFBFDE74DA
+:10215000AE5B9EE68BF710FE0312DA353F1372B8C2
+:1021600002F985FAC7D7C38B051F2C15F7063F2246
+:10217000F8E73121CF8FEB7CE3E5E748964FE6F1B6
+:102180008E89991671BF629819E309E3BDF54C83F6
+:102190007ED1DAC64329DD9FC93EB692DCC60E6504
+:1021A0003EE4AFF88F1F0CF1FB70FD7DD11E8AD786
+:1021B000EFBF1DEB89BF830EB4871571CFA4CCD7B9
+:1021C00093CD51EF8DADF2EEB1A15FA6B7FEECBE9F
+:1021D000691BF173DEE5441ED627E0BF6336C08E6F
+:1021E0001A5857C12FD61BC85E8C7AA5C649FCEB7E
+:1021F00080FEE71BF824B617FFCE54C7B51B505F0F
+:10220000BC80062430C12F6A06D911CF80730FFA23
+:10221000B156A9FEBE382FAC8A8FEE8FFB652CDF3E
+:102220008770655D6AF22BAC547DF49E7BAC59EFF0
+:10223000AC14F344C244B39CE8F3C24F457D573914
+:10224000023BB15FC9A727923C27DE1C7D9EA852A6
+:10225000B520DEF751358CCB773057E3F6730FFDA1
+:10226000C3689FE45460F03AF483E97CB690717DD2
+:102270001764DCAED4C7F504F2BD15E70337F13FB0
+:10228000CE0708CB176AFCDEE3BB2DE4875822E4B7
+:10229000ED512167CB857CFD1CE5CB8AF7587B2966
+:1022A000FD8590AB952887901E8FCDE0F6BCB83F9A
+:1022B0004C5FCF2CB48DA0FB22AB1C169A17944F09
+:1022C000AC2107AE0F768F76A3FF477666B9034E33
+:1022D000CCCFA2FBDCA5F82C37F2CD37CE59179C1A
+:1022E0002D1E16C84FF7162B2AF74BEAF7C8578949
+:1022F000FB0854F7CD0CFDD54F2656D829DE359670
+:10230000C787D7E46613DE811E9DB186755ACAB4AD
+:10231000EBBAEEFBC3EA9FECE55E83EF85DE606916
+:102320004176A1414FD488FB249927C88618F4C56B
+:10233000C28B2631F4EFF5D413BDE8CDF55C6F2EDA
+:1023400092A2EB4DDD8ED7F566A47ED1D3C5174C96
+:10235000369DBF541D5E467A6748743F42B2C3CA79
+:10236000F72F99D79B9BD1331FF095EC30E00BED05
+:1023700021DD6FF1E328E389D49347AED3E7D7009B
+:10238000DD3B344BF33C39FAACF3AB795EC83FFD2F
+:1023900008CD4F79A747535A50732DD9230C77692D
+:1023A0000CF72E1C5E7DBF0BE97BB846EC9FAF5649
+:1023B0004318BF74B8667119C1D5760FD266DC2F89
+:1023C0001E74E13D4DB3D6C8B49F7E2426984EF1CD
+:1023D0009FDF9F39231BE26316AC5D9A8EFC386B3E
+:1023E000DD523A377B24C137D86F80599687EC7914
+:1023F000FDFEC6BC67AD3EB4C77BE3DBBCD5D1FDFB
+:102400003D55F827AE53987708AE4376BBC6748621
+:10241000810F8EFCC24EEB822A2DD88E70D5BA5811
+:102420007C83552544BF0F28D571B50FE994EAF098
+:102430005D8B297324D07E4FEF72C4DB6F455F3B09
+:10244000EEBB3E2DEE45023ADD64F2BBF27DD7567F
+:10245000E14763B65EF26344BEA7977C178F936231
+:10246000EEE8F97FB7FF69688FF55D318EBFB4E69E
+:10247000F8924FE889791FA150C48BCF5A171B5A85
+:102480001845CE6689F3C7B3C47E99CE8F85D7EB46
+:10249000F639E7E3483E975EB884F8FACB7D2ACD5B
+:1024A0006B65C0AFA8EFA51746D37D500B9EBBE26E
+:1024B000718C0BFC6ABF4CF925A7EDC4C7ED3FF545
+:1024C000D23982CEDFA9F49D88AFF65D4DE701DAFF
+:1024D000C5FDD33A9ED29C7C3DBCC6C1F550DEE919
+:1024E0009F913C74F15768A686729E77FAE75C5E0E
+:1024F000F0FED93138ECEBDE1C77A1E06B80D72CF5
+:102500009F346921D49BDFC2E58A8D0D96911F7B94
+:102510006DACF7D128F2BFC6E131F9B5F25B96F3A5
+:10252000F7C0AE4C34C499CC12DF7BC83FCDEF6509
+:1025300065EE204B457912FAB05B0ECCF772B7DB33
+:10254000CDE3D4D317BBC6798569FDD63DCEABE8C4
+:10255000799EB053F25B4613DC3D9E5F8D8E369EB6
+:10256000EE718CA5F2EDF1D1DBFF50B4DF5A59C00A
+:102570007CA04F8BC4FDBF79A1FB34D41F79ABE3A2
+:102580001324C3B8F26B8A4DF14F7935B974DF5F0C
+:10259000FEEA5CED5E83BC76D185CD36D1E543475E
+:1025A00080E832D5E1DFE340B97CA1F0814F3D58AE
+:1025B0002FA7D3112D38BC82F4DB7DAE68E7A73E90
+:1025C0008CA4538DA013AC1FB20C74D2E913F97E06
+:1025D000EBFAD2073EC5FD8BA7F8ED45BDEBB10880
+:1025E000FA6544C75FA783F36B2BD80F81F3C2DF73
+:1025F00065A6F8BB5EF127E8ADE3477F0EF6DF5135
+:1026000094FB4E94CD51581FE78773E1ADBB7DC15C
+:102610000FE3A28F27C5A9F3C37C1604013EAA715C
+:10262000FBA3F7F13CC482B6F3184F979C2E36F10A
+:10263000438A7301975341FFA37B1E21BE6E0DC5D4
+:102640007AED19BD8F27C5D90B1F5C186443B3FF02
+:10265000EFF1C111CD37F8299C4760DEC279BDF09A
+:10266000F9C7861BFB97EA1897E6C479A9FAFCF626
+:10267000B783E3BDFB701D1E5C277BAB6048258ED6
+:10268000C0607CBFC8F5F437E8DF5B14FFC4F068B6
+:1026900076F4E2CA7D97A0DFB5AAB2995255D8C5A3
+:1026A0000CEDE20CFE5D8F68F7055E2BF4EBE2CAE1
+:1026B00066EEB7B50599DB70CF003B3292FCD88A45
+:1026C000C36CCF696AC08D7E734DDC83A02A81659F
+:1026D0001959E8674ACC0C1AF0778D93EFD72C4F35
+:1026E000DDE3C6FD102BD48FFE335B9A72CAE4770C
+:1026F0007B5D99E5043AE9D744C7B07A9F24911FDE
+:10270000F254841FF294A91F89CDA67D8A48BC2863
+:1027100036FE1D288509FFB3C087FE9DA4A56E3E29
+:10272000CE95C28FFD04FAAF2F023B36D645F6C1D7
+:10273000920B2C7C7D6853E8BE2B6B3C2FAFC5F110
+:1027400071D871FF43C6F559986027DE1026D3D59E
+:102750008B12C2F1CC2321DC878597E07AA3635CDE
+:10276000CB03F8FC797B20D70978FFA66FF301092A
+:10277000F733FC818B11CF357230D303E57F2D7792
+:102780006662B974C8FA3881A717E0398780619FFB
+:1027900094DFD7DC0DCB3DE10BE62B11FB86DF5F31
+:1027A0006CCCB7C7F82AB01F91DFCB4AFC42A2FD20
+:1027B00041FC4C079FFFFD343F2F77F27505F10771
+:1027C000F2D73E6E3F9D523C71B8EF87D879DDB4A9
+:1027D000EF63F3BC6E684F11EBD85AE057C5B04FAA
+:1027E00077A1E2B3203F5D540DCF8DFD8D62272789
+:1027F00038E8DAF2A876BDDE3F3CAF83F8944F4F5D
+:10280000227B24922F7674ED27F0EF69DDA1339EB1
+:10281000B288C3F14CFFD1FAEE93AEFDAA451C7607
+:1028200073A8FC5EBE3FFE696E1CC599EAFDB8A3A5
+:10283000696933DAC57734F59D89F8BCA3E0E23FD6
+:1028400063BA43EDDC138BFAE27E89CE97DDF9C1E2
+:10285000EB6A2CA45BDF5F47F71F3C2FE4713AEB78
+:102860005491FE01E6D6F87E5788DF47C5BC02AE1C
+:1028700057D15F71773874DB0D00DDF37AE80634E9
+:10288000F7A6EFEB7C03D543A0DE3D89F694F4F781
+:102890001ABD6F7298BFD7357EC546E3E91EAF8D6E
+:1028A000C6AF8F0F7A4AF8EFC28FB8F74DC7C7F897
+:1028B000997CDC77C4DE751D3BCB3AE00EDBB03F84
+:1028C000F3783EDE9F48FC7C8559A01F5F74FAF6C2
+:1028D000203F3EE3F4ED45BD5762EB4C570692BCFA
+:1028E000BC85CFCBE4C005C930FE130302172721F6
+:1028F0001E9AFB9C97BD7FC0CEF9FB809DF3F781AC
+:102900000C9DAF5B9CC8D7EC74228D53FF7EC792A1
+:10291000AD871FBB1DF8FBC4DBFC3EBB52D973E384
+:1029200043E4979699312E3E323D20FC0C2D5D7C80
+:10293000C8C73B43E1F232A32196CEC1CC982F9B6E
+:10294000EEDB9F319FC7C332A579F8ADA675C222D1
+:1029500011D7D2B31EF48344D63373FE04BA17657D
+:102960009BE61E477E91359CCF664EF4C9788E60FB
+:10297000CC3289F6F1471FF234B6003C3314EF45F0
+:10298000319DF9E07F0DC2FB51CA9AB97F34459E53
+:1029900093F9534857EDE1F33DC273104F0E9FC7B3
+:1029A00061D8CF69532B32DDC8CFF7387CA80772C6
+:1029B0006FF57D8274D5FD22FABCFB0AD801181789
+:1029C0009A7BB72707F924B7DEEEA3D4C69418D0B4
+:1029D0006BB90AB3619AA231C58E690CB3619ABD15
+:1029E00050D84F353791FDE0CAF16B78BF796ED37F
+:1029F000F35FE3FBF94A78B764E0ABDCA6B7BFA3AB
+:102A000073763E3FC5FD5E56A799D69FC3EACDF0CB
+:102A1000E58D6638336C8647EE33C36538366867B4
+:102A20008CF81EE19E9D5686DF2B2BDE6CA538F4BC
+:102A30005771AEA0785E3BE9C509C54DD91827711D
+:102A4000FC45A705FD953BFEFA32C559746E8A65B3
+:102A50001867B8FBD318168371BC9BEDEB30BF1819
+:102A60006887FED9E2CDF6B5184FB3ED529D4F43BE
+:102A7000140FB5ED6FFCBC4BE7066B08E32E8E6FB1
+:102A80007FFE45E4CBE31BFA931DF6AA14B4607DE8
+:102A9000C14738DDC708BD3E46E8F5E23AF37AFCA7
+:102AA0000A976EAFBA87E2FC372681E3BBB5B22F37
+:102AB00087C5772574FB6D8CB067DD40CFCF8776F7
+:102AC000D37988D0CF79A17B351FD16B410CEAB384
+:102AD0008EA3DA0CF44B5D5C63C6A3CEDF9784CC87
+:102AE000CF27BA24A1E70CCF33305EC5B32415E756
+:102AF000EF67A3DF537FBD8BDB192FBCA0E9F2206A
+:102B00008B7B2A99C770AEB25BEFB379FD319E081B
+:102B1000E935B0FB797144BB7AFDB12E2ECF5FDA77
+:102B2000F879824481876395FBC86EE8B2232B7DD8
+:102B3000BE890638AF6677722EE16F77F2BD86F9EF
+:102B4000AA64C3DEE4BB304EAE4E418F362BB9E3F0
+:102B5000B99F8F49C4E7723DF613F3118F6DF56F7E
+:102B6000B8B01CD8D9238C7167F93557FB261AE405
+:102B7000FE87F2B94EB71237C7CB2B39CD93F09CF5
+:102B800048710DFF8E6171FD6DB7DC80F85ECDCFB1
+:102B9000D3672BCC2F833C966CB9EDFA61F0BCFC6B
+:102BA00099515EEC0F54712B3E2FDE7892CE153D7D
+:102BB0006AE1FE8E48FA04059F3DFA134701EA399F
+:102BC000A8EF75CB087A7F9F05EC9B23E383EFDCAE
+:102BD00005458EB3FA0F6FA0F830339F02DF4B68C4
+:102BE000BF75AE97BCEBE8E9C2EC9BD154F72DA0C2
+:102BF0007879C88FBA7E290C99EB89A4EF6AC16FE6
+:102C0000F01B62E493C8727DA604E9DC74C97CD031
+:102C10009306FF43C9A16A8ACF8D6C07235898C1D8
+:102C20000EDA81E17528979B789C16FC245BB688A8
+:102C3000631FC461BAC715F91118A2F85236D183BF
+:102C400078BD994DC654D7376D39F5C3B1FCAB5239
+:102C5000CB73BFA2FA9C24E76DEE30DD6FDB4F9C97
+:102C6000476FF37058FFEE8F9E5FD464A7B8AEE352
+:102C70002734D2BF0B309E14CBBF68B758C0683D15
+:102C8000BEA5CF788C536EABE7F7A51FABEF335ED5
+:102C90003BCBBC1EA94FF4F9F620FE391AFD7ABED3
+:102CA0002617CE838B781C774A9F8ACC8A2874D2C9
+:102CB000DF4BD42A3271FDD3798FC3BB8EF014CC95
+:102CC00050C8EF9F4A7E9A5CE19F3AE8F6BFED025A
+:102CD000BA39A1AC0FFE25EC93D7A1DFF30BD9FBDA
+:102CE000807B50F73EFDACAC009DDFA30FF440FBB2
+:102CF0003315165680DF66E23C359C609A4F67AE0E
+:102D000096289E71D672F378F0BE6EE3FC5AC0AA84
+:102D1000A9DE22564F69C16A737E21CE472E3C2719
+:102D2000C7E3768A6ACDF9FAB9C0928D67ACD1F063
+:102D3000F635D3C7E7FB02C727DD6CA3FEDDB72A54
+:102D40008EEF7769CC87F36DE72A27E9FF6216A03B
+:102D50007EDC29E6FDF207737DB320ED983FD33783
+:102D6000AB0F9ECBE7F3232D19499EF9BD7EC5130A
+:102D7000597800BFCF87E1BC5BDC248587216C03D9
+:102D8000511DC19FE3BD26387EE379367DFC386E48
+:102D9000E373F63EA76F119E9B92F9B88DF9250259
+:102DA0001F251BAD267FD1988D52D079399EAF6AF1
+:102DB000A1F7CA1ACE584DF58A791DEC016607BAFB
+:102DC0008D29582BE3605675E9F1D025D1CECB1C67
+:102DD00010785C755B5E5F94DBC7D1BEED27109DFC
+:102DE000437A4AF8A358D806EDC58CEC82293F7B7C
+:102DF000218793E21EBDA6268DBE2F4AFB61336557
+:102E0000FF9B780EB3323ED0370EDA9969F1A52BCD
+:102E100024BFBEC1E46F9DCFF1F0E4888A4B2AA2A3
+:102E2000ACB7753A3F21D5539C40703B9FA79D5945
+:102E30009D6AC0201723E3B8BE8CDBD342E78F3AEC
+:102E4000B74A74FEF929E9209D0F7EEA5A0F43FF25
+:102E5000402AD009F5EF53125B84F7FC6535DC346A
+:102E6000E70DA473568C17E30F4A1BC6C9A50E1AAB
+:102E70003FB7E3622BD6E2BE54CA8C212390DF61B8
+:102E8000DC336E86E7A3E33CD45E5F07A77BEAC230
+:102E900060C6DCA1D8BE7FCE1B288FC362E8BC7C95
+:102EA0000AE0CA9940E932B4CF5259E66EB43353BE
+:102EB000A77846A04F7F958BB793649167DC84F623
+:102EC000E3080E273C2CF9D61113AEA07652ACFCC9
+:102ED000937AF81CED4D1BFA271C067A4FA8C8C43C
+:102EE000F65306F134510BA7613DFBBBE81EA075FC
+:102EF000C83C37237D3DEFBB7129B82EDCDF060BC4
+:102F000075D063FBD3F4FD97B083ECFB0B87F0F235
+:102F1000C24E9997C9CFE724A6EBF6152FD7A1FA91
+:102F2000E246A25E7D8FDBF95F397CE407BF42EBAE
+:102F3000E53C80A053F9E9581632CC0BE5D3BE210D
+:102F4000FBB3FCB4CBF41CEF0935C6959714ECA188
+:102F5000EF3B94B2663A9F505A6F8E83BF22267A17
+:102F6000BB3A9F979F9659306ABB9AF9F9E93E2C74
+:102F7000D8275AB964F3F3D392196EFC569453E8E8
+:102F800039CB6971E1FA710ACE47A8674296A07AF7
+:102F900079375DDADD2DA679A8DDC3E10EB1BFA8D2
+:102FA000E7EBF5B74FD3C4393D7ECF7B5B252820B7
+:102FB000C0CFD34D27C9DF5DD2B49BF0A3F3453713
+:102FC0009E6259D080A7E4AAE6B00564FCE9B8FD8A
+:102FD0004B875E0224D9A3CBF33B4B7D63211FBFFC
+:102FE0006B6190EFD8AC2E792775B3CA220BFDF038
+:102FF000EED289638D302FDFFD7EF3351381B7B2BA
+:1030000086F2F76BE3DE7B6B21C606759D3BE84CD1
+:10301000F73B0DB02D0276003CCC00BB23F213230E
+:10302000F25323E0345EBECD194E97BD8C6D8EFBFE
+:10303000E01A05F45C5BDFF074BC796479D547D79E
+:10304000E0F78E4BB3F8F77BCB9A24AF64D0A3653F
+:103050005E1E87E4F0B6683387221E9ADF447D50F7
+:10306000D228B971FDE0A8DF122618DFF318DEAB15
+:10307000E7EBD392FA83F45EAFF50FB1903C3F3AA1
+:10308000E4732A77AEFD2D36C5FC3DAFDEF6BB52AC
+:103090002D81B750DFEAF7C7B76DF9A8FB7BAA20EF
+:1030A0007FED7D7D7B499F469C5B2FC7FE38BAE54F
+:1030B00045C7E3A3434ED17DBA7F18D6F4019A07E2
+:1030C000B1F34E2EC0AB75FF547A7814DA5F7827CF
+:1030D0002FCE1F4F48A14B705E7A9A052EC176EF16
+:1030E00029BD68377E6AEC80DAF20C5E09F34DDCAC
+:1030F00049C2FF0167CB00FC64DDE9C7FFC2E1A460
+:1031000016BA09E6B6EAEFAFC1EFCD1E18D032C04D
+:1031100002F0F78F5F3A99E08B5A9E41F8C2EA04B9
+:103120000E0F6B1920C3FB03837D2623FDD6BBA3A3
+:10313000CBFD09A16FF4FEC50EF61D8943FBAA84E1
+:10314000CF3B782CDA067A757AD1B14DEB011FD3DB
+:10315000FF2396F4DDFAB65BAEF3131E827E8C6F0E
+:103160004C11F8A67991F4BB42F6445F9C0B13BA5C
+:10317000E9E94C6FF6D0BC7169C516B41F52A60FB1
+:10318000A579E35597EF27EE51DDE9E9249EFEC4CA
+:10319000EDE6FA5BB650BC46CA434EB2AB1E17DF33
+:1031A0006700B923FE7008BA58DC7C3CFF0D197328
+:1031B000D11B0080000000001F8B080000000000F1
+:1031C00000FFDD7D0D7894C5B5F0BCBBEFFEEF26AA
+:1031D000BB9B4DB209F979F343081071139318A9F9
+:1031E000D64D881831B50B22626B7149F84930C948
+:1031F00046AD162DBD5948548208D146040AB8E19F
+:1032000002622BFD82458C1AE88288F62BBDDF72A4
+:10321000EBAD3FBDD71B7E8A884256B45CEA6DEBAE
+:103220009D736626D977935CA87A7B9FE78B8FBEC8
+:10323000CE3BF3CE9C3973FEE69C33B31ABB86902B
+:1032400064428E25DC30C74E9FDF31E6159D4C224F
+:10325000A4BB33F49C494BC87B1221C44548F009F8
+:1032600053687B0E21DFEDD1047589B4DEE14D7327
+:1032700016D1B2447CBD45C3E5BD7FD5DEE5B3D2F2
+:1032800072312DD3E7AB12998BF533BD690E5AFE1F
+:1032900002FEAEA7E51E569FAE25AD589FC3BE7F6A
+:1032A000AA84DCE5A3CFD4763A6E297DAE9DB8B56D
+:1032B0009D8E6B918917CA0BE7166C5D4E616A7320
+:1032C000CC427889D79B2651F84E36E66A56D1769D
+:1032D000BFA7AFC835845C51E0CDB097D1F940FFAE
+:1032E000741CD2442795363CFE1C9837ADAFD77A74
+:1032F000B3643ACFDB1DFE39D0BE5EE39D42B4D04D
+:1033000089B7C07705B423889F39763BB627F2404A
+:1033100019BCFFFF084F95B8EE5F114F77EF34757A
+:103320009D2C24F8F705FDB7B9D7A12A07FAD2BA20
+:103330004E1A87CB77C3FFD07148AD2493143A2C33
+:10334000AB226E8DFF36E8BF79E9077AA28137514B
+:103350003DF42FF0BE4E0AEB52E9FC82FB24CF76FF
+:10336000C2DECFB2119295E8BF13E621E09EF7C30B
+:10337000E6347FD1F07C2C3F78A9E6765A9CB7E4FE
+:10338000CCAEEDF4FB790F59085186DBD31E719D4D
+:10339000DF7FCFB89A5C499FFADEB086E2EBFD1979
+:1033A000C4B39CB67B5F431A00FFEF73BC953F74B8
+:1033B000F7113285905FD9B5F89D49D083E4DBBD24
+:1033C00088E2B753224123D0C34C3DD2C36088D298
+:1033D000C395B0FE747DE8FBEE07278782747D06F7
+:1033E000C90091613E15C4BE5D89A9BFA300EB2948
+:1033F0009D044DB43EDA680E6D95805E28A0A55000
+:103400003F09EB5F95D8FA07EF30E238DD33191D3D
+:1034100076373A43C11C00B68B00DEC6A2A3947671
+:1034200082744864EF9499B6617C6CE372C1523A3D
+:10343000F0E2DBB43FB2DAE4194F1FB0843294BB40
+:1034400052713C4A0FAB91BE640647FD8FD342AB2D
+:10345000705C4F39ACCBA336EF7C781FFD914501F2
+:10346000F83799C84A63097D4AA4C3E8A4EBC0E1D0
+:10347000215D4F13A083BB60008A877F6F386F5335
+:10348000E8FB9FD825840308CD584E481D61F5758B
+:10349000CB2CC7A429F0D4860D09F4DDCA1BBC03CC
+:1034A00082BE72D9D348FBF373BA22EBA336C08332
+:1034B0001FBE4B80FE3FB7295628D3EFA7C0F2D3DB
+:1034C000EF0B87BFFF39F07D19C0C7E0276D166588
+:1034D000BB348C1FF1FCB980AFEB696FEC78629C58
+:1034E000F87E8FD9BDFF07F045F11E4E74015EB422
+:1034F000B8AEF1F0BAF4D1C74DB47E5E9BD6B182BE
+:10350000E2D3BFD486F315F0DE951ABD8EE48DECC0
+:10351000FF94A5A55C86F92F65744F961928E26281
+:10352000F1A21F2E53D25D48A28735D228EFE5F0D5
+:1035300001807F5177CCF7F8DFBF1A62DB09BE212B
+:103540008A14073FA72B459261DDFC125B37BD3E15
+:103550003A0FE4563CDC029FFFC6E58DA08B787CD9
+:10356000FF1BE0BB6C24BE5DFA814CE8D7BFD48062
+:10357000788AEF9F90107EF7B489044D94EED64B75
+:1035800012D2EBFA072D21909B83A6E80EC067604C
+:10359000FF8DB8DEE71ACD0AA14D36EA19BF05F74F
+:1035A000DB181F170C1480DC3B47E7ECA5EB73EE30
+:1035B00037DA9EA0248020A4E537DAAD40FFE75E2D
+:1035C000BE89F5B3DCA2105A0E0086E9B881E07F0F
+:1035D000B6118A57699611C73FB1570A19A0BE8F15
+:1035E000E239465E9EA3FF36940CCB8D41A800388D
+:1035F000FA2C08079D69238EF75D335945C76FD1B3
+:10360000485E0DAD6F593229D4CEE031C6CAD51609
+:103610000DE9904A86F9BF4573BCE0DE225627A724
+:103620007079AC60BB431285B3C9B83AA205FA05FC
+:103630003EA0F54BA03E67781D5A567FF417984779
+:10364000CB1E357D343DAF9EC79258BACA19A61716
+:103650004B29C317A926A1F1145E1B2F5B6A2221F7
+:103660002DE063E93472E22ADAF4E0C074A0235B4F
+:10367000692FA9A3CFC069E20D51B8A7F6F7BC36F0
+:103680008EB677D4443261BA81A5BFCD3B79D5F0EF
+:103690003A0B38AFE97F424BAC381E7E4741F1EE22
+:1036A000B662BB89B3AE887DAEC0EF92354C2F0FAA
+:1036B000C02BE01F99E9CD755C6F52FD8AF27A61EB
+:1036C000D704D4AFA0FF40CE3D95C0F431C83D90A3
+:1036D000336D8EAAAB1C749E6667D51447191BC741
+:1036E0006783E927A1FE88A7EB783D24DAA5E6B534
+:1036F00016B75AC76E47F90CF116DD90C8E4882C4E
+:103700006179D1AF753DAB103E19E9E6DECD3928C0
+:10371000971B48971EE8BC8984F440C78B8C24987B
+:1037200040E962116D96489F8BD71B8812B37E8D3E
+:103730002175B989CB85BB4904BFBF7B675C7D35EB
+:1037400009DB687DB391842DF0EC55D7B7507D8EA1
+:103750007CD6F78521F63DE966F3BD8BAFBBA33A76
+:10376000A4F5D3796F3051DDEA84065DB83E5397F6
+:10377000F5E07A269678731E06BDF22B9D672BA581
+:10378000DB3FF0F512F83966AFAA00BC9BB51A9C76
+:103790007FF46103E2E724D5E3B0FE6B1DE4AE598C
+:1037A000F479AE8D78F37580267BD62CDB483CAF60
+:1037B0007AC5D40074D3E0D0A8E82AD3A1C372F9A3
+:1037C0000A8EFFE596D0D61C44F714A0A7F25CA1A0
+:1037D00057C99499B47C4C47ED3B5A6E9963F543B5
+:1037E0007F03604FD0F2FD0E26CFEE77E8713D45A6
+:1037F00059CC57D00D1D07FB335FC59E028E654324
+:10380000ED9F6074C3F5F0BA46730FEAE121FAD573
+:1038100010A4DF229F1EF0FA0A972BF3C16EA1F8C5
+:103820007E851214C88F602FB35F293EE62DA5E573
+:10383000574E1779562940674CDEBCF21D3359416B
+:10384000877CF3CC4F1FFB275A7FFEB45E31D0FA42
+:1038500005406B74FD5E918817C60BBE680881BE7B
+:103860006CD2337BB469FF15CC9ED1FB372C8471AD
+:103870005ED079C0DE694A083DB703EBD33C94A221
+:10388000C9AB3A86CFE0CB16F6BD39F4B39FBBA0E7
+:103890003ED513A4EDA326FF4658D7748392887AA9
+:1038A000F9D75AC2C6091738285E8F8798DD7D9CE4
+:1038B0005649304EBF0DFBA17C9AB690F673A233E9
+:1038C00015E743E52FDA5927D618B682FC5D373461
+:1038D000AE84ED8FEB7CD3D368F9F88BC59EE5B44D
+:1038E0006AD0A70FEB293D07D632BBAF5EA36C01B0
+:1038F000FC90FD169C87588FC09AC5B5501F58B2D2
+:10390000EC16908F63F139C87B122337CF9168167C
+:10391000F0D3C686DCDE30E895FE891E54AFC44D78
+:10392000179FD28D9DB53DA963F88DEED3213D5FE4
+:103930006EFF40177239D343304E80CA6522F80FAC
+:10394000E5724C593B5A99AD63E095546EDFA9EB93
+:103950005312FC47605D5A9EFC8FF7972A305E1425
+:10396000E522E94A46BE3CA9F3CE03BA755487F571
+:1039700075317AFDA483D999F5066E0792B03E960B
+:103980000F457D79959AEEC5F304A77F5B84C9F74F
+:1039900091F51ACE1FB71A408F4D6520936CD02336
+:1039A00056E85FC1FEA79E0EEBEB69397B5958BF05
+:1039B000883F814F28BEC3463AEF931B6C8CBF29CA
+:1039C0001AA09F451504F5E5222DB5634BE0BDD245
+:1039D0003740D7E5D48B0EA42FF2678A158AEFF90A
+:1039E00084B73350BB97CAB1973AA430EC0BE6AF1B
+:1039F000376C35E5005F7BB53658CFCD12CAB1F9CB
+:103A00001D95051B6879C99E2B70FD132A185D2E24
+:103A10000939502F4EE5F2B1DE10D2A31DFE3389D5
+:103A2000C03E88F68FF67413FD28AD64241E40AEA8
+:103A3000ABE8211453A6F6D1D45E26570995E724A6
+:103A4000C66E12F21EE43889B303D5F41114FA8855
+:103A5000C93DA2A482DC1372F998DD97E8443B3E8D
+:103A60003F15D697AE27939BBB25C46B3369457D25
+:103A700022F4C0D0B85C8F9CD20699BE323C81CF74
+:103A80007C670EAEEB12D28BFA44E895B1E820DFEA
+:103A9000A9E1FB88D1E960BC53C1FE9A4E93F07551
+:103AA00074BCA66524DC3C853D6D53503F323D69B6
+:103AB000647A129EE6CBD097F1FA315E1FC6EBC155
+:103AC000543DD377629D853D933A8DD901539785B7
+:103AD000B4A408FC35DEEA94E461BB26F08ED1A8DC
+:103AE0005C09651FC905F99E50F9622AAD0FC8C46B
+:103AF0000B7C65A178E9A1EF3773FBB72795CDD78C
+:103B0000AD67F4AB937DA4D80AEB12C17D6F3499F5
+:103B1000D8811E053E37DBE87725F01DE3B7A1EF1E
+:103B20008DA4C31CF37DD52B26D43F175EB6850C20
+:103B3000688FF8B31DB4BF94DF1BD04E3DF78A0DDC
+:103B4000F5E939AE0F5DC2EF401E617E16BEAE4193
+:103B500052358E00ED4B33C6810814F659B383D924
+:103B60005923ED215E9F1399C3E8CA80FBCD0B8ECC
+:103B70008107A04CE121A07F6E71327E0FEC995637
+:103B8000FC43FA3EE0B37A18F6FDC540AF06EDF708
+:103B9000E718297D4DD72E8B3E48E7D19C69B58328
+:103BA0007EABCEFED7DFDD41CB1FEED11103ACF3F0
+:103BB000F6697349EED8F2B731A43B3E10C32F77B4
+:103BC000EF54979B7BD5E5409FBA7CBFD3E63A651F
+:103BD00041D9E1F982D2B5C1D07ABA87C26B78D522
+:103BE00080FA6886D3FF9013E4AD267A18F06CC88B
+:103BF000FE780AF83B02FD9F48F03450368A1431B3
+:103C0000FC035F5F30CDCFB68F82B761FC11A30696
+:103C1000F14CAD75F6443917E07CE2D27B3F3C4075
+:103C2000E7BF6896D9BE02DF786BCBCAC19E441845
+:103C30004960FD4D1FC2BE8BB66B84F53F3593B610
+:103C4000A37035AC67FAB0894412806F5BA8DD6958
+:103C5000A44BFC1BCE6F777744CBC3F47FBB9D3561
+:103C600013014EF92FB20FE8E351E837C64EDEEAF2
+:103C70006472FC4BFB993246F899B602FE9A8D03AA
+:103C8000FA4A3AFEF57FF90CE5FDE2A5AFE13E8286
+:103C9000CE633EB3AB4D0AC8A7C50F1EC0F762DFA7
+:103CA000762AD38AFBB6D7361858D9A1C7F2A9CD40
+:103CB0006C5FB9B8570AC13CA55917932A412F6CBC
+:103CC000D6D90D64245EE3F1F8C1A6B713C0EFF5B1
+:103CD00001221DF67B12B3C7ECAD09B87F505A1311
+:103CE000C0BE0CACBFF143908F8B376B3D602F9003
+:103CF0007D36F4CF2CDE7CC3C48556E8E7D3A44AD6
+:103D0000F0136DB9013C54D0CE17627E9EC8F5F415
+:103D1000BDBCE56A05F8F1D06606FF62877107D081
+:103D2000D1F57FD1227FC91AE2073BB95BEF9D082D
+:103D30007CAD6CDA3E1DD6E78399E91A6CBF4B2245
+:103D400076C08B63690ABC5F2CC93EE0E386F58DC3
+:103D5000B5B1764F9D93F9C72AB397A50C5891AF8B
+:103D6000E6803E6DDE4CF908C69FF5DEEFEE700D85
+:103D7000F395346BFD2D53A1FF67751EE0BB217BCE
+:103D800066D3B790BEE02F4CF1B598E3EBABF29958
+:103D9000C122F8A4B500E4EAE215AD05F651EC8CB9
+:103DA000213ED944F9723221A79D12F902FC9319E0
+:103DB0004ED5BE63AC7D9AB550837AC6E821DEED60
+:103DC000F4994AB7C9B01FB725C9586F4BD2237DA4
+:103DD000CB7FBA77E76FE8BC9E74FA2F80BECC2603
+:103DE000DE62D06B4AD45E45CD5A4035DA61641349
+:103DF000B3AF89CCFC85EB92C98E5531FB7353125E
+:103E0000DB4F5039F105F473EEDD3F1F06FCB6645D
+:103E10007D3C05EC85C0C5CFF4E05FB3F64B28DFF1
+:103E2000AD1E1F01BA09F4CF240B8A86E572C0C308
+:103E3000F446FCBCE624E9981C7545B19F4A97827C
+:103E4000E56E07417ADAB8D48CF6FE4657C80440CE
+:103E5000FFAD7C2BECA746EE0F346EFB85570B7441
+:103E60001E92ECE3A1AC30FE186C9817D2D2713ED2
+:103E7000DC9617C4F29E4A8F96D659B7FDE3CA5C0A
+:103E8000C0539FCE03EDAD9E810498DF87DB4E24A7
+:103E9000C0FC1AB66971DE0DA14F5216160DCB0982
+:103EA0009DC65F900476825DB2C2F8425E7CB8ED3A
+:103EB000D3940556E63F407D5A3A3A5ECCCECAC905
+:103EC000F0FDF5DF64EB726697210472F08C89F9DE
+:103ED000F745BB3336A6FFAE4B12FECDDE2CD03FEE
+:103EE000436579A206E4C4F7ED6CFE2E7D6F16F0F3
+:103EF000E54792BA9F252BB52444E552E34A8984CD
+:103F0000A8CC3FF3DC4B5920FF3FDCFE52565D0C42
+:103F10007CF1DF89E78D496A7F9AF0AFBAF4E10C52
+:103F200018AFCE63607ECC31FCABA23D59CFFCA470
+:103F300083946B810EC577830D662FD8BB83C4181D
+:103F400002975B5D3FF7D77ABDF92ED8D788EFE3AC
+:103F5000FA5F0DF444E192FA24F427588AA2289FCC
+:103F6000BFB4FC77D1F58C91FF749D8DB04ECDC65A
+:103F7000E8E17104E9430F78D3B75865D05729EDCC
+:103F80008CBEA2F76B709FE532274C81B8803EDD76
+:103F90006D05F9767D81B9439308EFB342D03E3386
+:103FA000BD10BF0B5631FA0FA610F4C3A5915609E8
+:103FB000FDB476E6E7CFA820F655B4F8B32466E75B
+:103FC000B88967BD360FD75FC23807C78BD00F409F
+:103FD00047202FCF4846A423A95F427B54ABE99DDD
+:103FE00007FD8E45572BC5BA72BA1A2AFF9DE8EA1B
+:103FF0004941C723E8CAAF205DB98DA3D315F72384
+:104000005F767B12F4C1BE3695E36B2D973FD1FBF3
+:104010008DC2AF2EC17C6B797FB5466B580B7AC4CD
+:10402000A3FB38D63FBC89DAC5B07F4A03BB9E3EAE
+:10403000C7B5CF5770DD486400FC0896AB8DA82F3C
+:104040001FD34472C08E499DD4BA1BE823755E51BC
+:10405000493BEE0B331CA01740D7A27F74E9341FF5
+:10406000B323581C283A538FFB9C96072B7DCC8E8C
+:10407000A8417E09AC3629A007A7F5E72C07FA0866
+:104080002C231E03D271CF8645E0CF9D6DF580AC09
+:1040900013F125B252CD779D128B53056F22180F65
+:1040A0001B8E330D6CF921E8FFC622F49B0CF98FAF
+:1040B000F309EA8DCB8D43D6AD3621DE45FC68D0C1
+:1040C00046117425FA91B13F9268647A68A47C40E5
+:1040D000FF734A05117FEBA19C2ECA3CDE23F85FDB
+:1040E000C4A36C45BE1CB0C82B9C39BF32439C0492
+:1040F000FC776CB31684FD00FA8D5919DDCA4F693F
+:104100002820E950FB9FABAA3362CABCFDD0F7C19F
+:104110005537575F8BFA77A81EC0A67A5994BD26EB
+:1041200005E255C3F532B5838D7D12FFBEE2E61B75
+:10413000A8AA1E94C4F87FEEF4821FD14454E3C5AC
+:10414000C227C7F5AFA3FD5B15DE3E38EE26E8EFCC
+:10415000A912517EA0D34BE15BAB53F78728E5DF73
+:1041600043418CF77F530EAF5A9D316C1F507BE15A
+:10417000CF4965C376C2A3EFD5765D49C7B2D83FB4
+:10418000D583FE15FA3EE092D00E89E7D70497F466
+:10419000D5EC6B65847D9DE062F6F5746049BA2FBD
+:1041A00041F91D58E62360DF52BBC4E942BBE4E39A
+:1041B000530768FDB9599F1F1EA740BB7BE6C1BED0
+:1041C0002A705146F91BD8A90D49946F8CFDCCAECD
+:1041D000A6FA1CE305827E96D839FD388204FC9746
+:1041E000DDFBA432A077425AB36EA36BF903973775
+:1041F00013C7E1FBCDF87997BB985F205058B5A164
+:1042000000FADF2611B01756151E4F5980FBA9631F
+:10421000290B63BE6BEC7B0AF1D9B853372A1ECB4E
+:10422000A9E104786C79F9452FC88D3321096542DD
+:10423000831CEA04BBB6A141031621290DCDBF039F
+:10424000E31F73F5643C9D5F06D777819DB706A792
+:10425000C2BCE9BF127DB5D1B708E5C4C6B9462BCB
+:10426000C6910AEBEE413CD8CD5EC0C3AAC2AA34C7
+:1042700018A765E6743BC64DA83D07F52D0F7E07D0
+:10428000FD4502AE557DBA1AB077CAA95DF70B0A93
+:1042900077A673468D87F2F538EDEEE2FBAC10574A
+:1042A0001F5D8EFFBF6446171D922FF8ED52F48FED
+:1042B00092587F67761FB31F6F71E955FEF15B5C03
+:1042C000CCAEBD36189906E4B25F1EB0805D1D20ED
+:1042D000DE4F605F4D7C56653BAE13935FAE360597
+:1042E000FD6646D7C0635742FDB532EE67883CF0A5
+:1042F0006318F75CA7CBB38A703E80F283452190A8
+:10430000C7FB5CFEEFC2FA96737BF5DCCB371683F6
+:104310007F51D85F9DCF99506F76DA94276B404ECE
+:10432000FE49667903C668641AED67C9E74E1CB793
+:10433000D314EA84F50FF668B1BEC9EA5F04F4DB72
+:1043400078EBFA299887600D15801ED5B9BA08D088
+:1043500031DDBEA01FC5E8F21188234F0BCE972593
+:10436000D0177176CD34F063E1BEC5857EDC2ACEF0
+:104370001FE329159C32222B747C91346CE7BCF925
+:10438000E7D932BC14F68FC6C8FCEED573CD04EC69
+:104390005CF248F4B006FCF8AE08017BB8B957C22D
+:1043A000719A0B5FD0C3FEE5EE5EC6DF01BEDFA0F3
+:1043B000F8CBC27894CBC2ED810E46672472781C8C
+:1043C000E0F979B69E84D076317E5742963379C033
+:1043D000FBD3F3F84333F737514D88F5AB5CC2CECE
+:1043E00058A18E5BF071D74911AF16F05A2CA9FC79
+:1043F000E4E2D9C3BF4F3C189D0EFC1BA5F4057E1B
+:10440000A70DD2CC7B5EA7F3DB5036C903A6989BE1
+:104410009293B604DE5352A4782FEDFB643AD00D8C
+:10442000A921C8AF2D7D95DA662B8BEB605E8CA53C
+:10443000B507EA53EF2A44FD0C719359F4FDB31C00
+:10444000AF6956E6C773AF08E6401C34F1A0EF9E93
+:10445000D761FC2BCCE8874DA56B6373E27325F81D
+:10446000BDDCA4F800E86777AD5202F088781FC47D
+:104470000B67160DE7E3383D92772B7DEE76399882
+:10448000DFCE406A005E781FB20EC71FC19F07E3F0
+:10449000427C0F9EE7D2C232FAFFC9C096EDB8EF58
+:1044A00037603E486DDF1BEF80FEAD35925E8CC7F6
+:1044B000C6D92DD589B7BE02F43F78F6D4968701C8
+:1044C000AEDBF67A30EF25CE1EB9FE9BCC3E3FB375
+:1044D000DDA2003F6CE5729BDA8FC827C15D6C3F9F
+:1044E000196F471E75A9F72743E5AFDD8E64F00508
+:1044F000B7B33C0B21DF037CFF37D8703E01F4D704
+:10450000BF0DC113970FB28DE783F48F9E0FF2E6B4
+:104510000E4B10E8E17CAF09FD92328F7B9DB545D3
+:104520001F002475380ECF01791B5872E6E71ACAAE
+:104530007F720F8B23C9128F33FD4A4B585CCC6BB3
+:1045400007FF8B805B764C777B8B403EB27937716F
+:10455000BF5193B34061F12E9637D494102E007B57
+:10456000EA55AE879ACC2C5E35E8D087615DA326EC
+:10457000FF1F5D18D762DF935F1A94D8B8564F8833
+:10458000D975270A35613D9D670FD807B06EAB59C5
+:104590007C6B289F60BFA1C7C0E290581EECCC4145
+:1045A00039592FE256FB993FAE9EC7A74ECC5AF41D
+:1045B0000CA45C7448AD35B03FBBB0AA12FDE80F47
+:1045C0003C39139FF52BD57EFF45E0A7CF1B8E23EB
+:1045D0000BFF7B1DF1E899BD3CEC47D450FB4559DE
+:1045E000295781BECC21F61520FF95205DADABE9A2
+:1045F000B3833EC168973412D83972A7CB0CEBFB5A
+:10460000688706F554B043E3857602CF39C9CC8F6D
+:10461000744D32F36BD0A50AC138E2D9A1E371071A
+:10462000DEDF72A209C35323B1E7A376B966347DF6
+:104630002DFAEBD0B51AC14F17CDD4A0DFFB82DE27
+:104640003B17FDC6CE020279541DB6D69535AC1E79
+:1046500079E78229EAC3FAEB64664812C509F233A6
+:104660003599E7CBC5E16D6197BA1C1F8F690CA91D
+:10467000CBF5C43F212D8FC50F62DFA72633F97517
+:1046800061550EC7B707F3E3C4FC976730BC6932C6
+:10469000D93337B36A2ED0412EC49773E0C9FCAB2F
+:1046A0007426087FEE752E09E9230EDE0E30DA80BF
+:1046B000BE3A593CF46F853F1EEECAE414AE1FBCEF
+:1046C0006E885FD6DBF5188FBE5C3F495DB25A0E2F
+:1046D0000D95BFFEFD2CDB27756A799E8D1DE5507B
+:1046E0009D9DCDE584E4D91186F7566A2FC03C3AEA
+:1046F000B525603F4CBBD58AF368D96F423F70F354
+:10470000B2812CD0E32D55030510B789C72F402B5C
+:104710000BF945DBD5B9E8FE03EC84D8763C5F4B5A
+:104720001D67F5FE20B90CF6392776BF01FA6AB786
+:1047300009F515FDBF0306F0B3BC9C83F6CC8736A4
+:104740007F1BB40B98C35B9ECD01BB85D94DCDFDBE
+:10475000861EB00BEB3A62E27CF09FD5EAB81F5997
+:10476000E944FF3BE956BF6FD814F7DD883860177E
+:10477000AEF33ABD7F22F03BD53B987F70B65183B4
+:104780007903F55ACF2290B7674D6A7BFCAC8DADAB
+:10479000D796A175F6A0BDB565CC75F614C03AD70D
+:1047A0006B883FB69F665867BABE4D7C9DCFBE787A
+:1047B0007501ACF3C7BBAF2E80755EA7EBF202DFCD
+:1047C000B439FC5B9369BF276FF0A13D25F2582FE8
+:1047D000971EF724ABFD2B43E5FF21FFCA58FA30A3
+:1047E0003C04875A1FBAF44A06C8833AA3E1BFD5EE
+:1047F0008BF037AA1FCF68407FC7FE3F7FBA66079E
+:10480000C8817E2DDA23A2BFFDB23F0FECA1FDEFE0
+:10481000B83D4169ECFE1BB95FD86D2441F0AB880F
+:104820007D80B027E3E5F15B7C3E1F257B6F00BBFD
+:10483000E6CBFA8D1BF83B63E85366E76E933CCCFE
+:104840006FDC8B7EE4967DF3EDE0273E1D627EE318
+:1048500096178BD16FDC187A2D0C7965A45FB2C3E3
+:10486000FEA371DBB104C80710FB5CBAAF3D938CAB
+:10487000F4A8DEEF9E0E9D4880FC010A7725E871C2
+:104880008B2BAA07BA6FA1FB3DC8236C91A387A10C
+:10489000DF1617C13C97D23EF5FE4FC47937FAF4C4
+:1048A000287737F64B2190D7297A7F4E06E8359244
+:1048B00061C77820E7B38BC9DED494B2D8F8BAF7D1
+:1048C000F3E4E4E17CB0810D8948BF033AE2B583AB
+:1048D0003CDB60E3F24C46F9F6C74D8E10CB0F631C
+:1048E000EDFF18627642A3C80B934958A6EBB56852
+:1048F000B6F75D586F90F7E138791F5B1671FBBB17
+:104900004918F552331918CA0F8B6D171FD78778BE
+:10491000B8AA1FD25AAC801FEC4EAB07E081F8B8A2
+:10492000BA3EC8F6EB941F96960CD3AF580741BF1A
+:104930002DDC0F1D6838FE08D06FA04FB2837DD7E5
+:10494000E461F4DB44F75B90471BCFEFA4579D373E
+:104950003A16FF97A6A8F5D150F9EFE45FBD3E45A2
+:10496000CDF762FEC26F3F34CF7E89F165DCBCE2D9
+:10497000F7A9F1FE76B1CFBC5C793827452D0F87BA
+:10498000CA7F67795837B42EF1F2501DCFF89BE5F6
+:10499000E1FF705CE3997D4F27C0BE03EC78D8A798
+:1049A000ACDCAE63F91314FDB1F1E2E95AAB97C583
+:1049B0004FB5A25E1D8757A6F3383CE3EBD75ED414
+:1049C000E2BA35F33871F33E9B079A365817639C69
+:1049D000363E7EBA84EC9E0E4B151F476D027ECE8E
+:1049E000BB743C75750A8B8F525872206F213E6FD5
+:1049F000EB35EBA749FE9875AF2AA21B8251E8DB85
+:104A000028078933E6FDC6146657BFC6F38BDC7AE8
+:104A1000768E60ADCDE285FD8C5BC3F29F7EE0F2C9
+:104A20006D82BC18A3C2F1FAF2ED4443F1F28CAEF0
+:104A300017E54AB0D9EA013928FC37A2FF8B3C5E62
+:104A400071D9FA3F8EDEF7FC0FD37B3C7EF68BF1FB
+:104A5000FED6B8DD7A8A1B155F10A4E323105FCA67
+:104A60001949BF63F533161D1F4DF11D496176FECF
+:104A700014CC57B84C3963298D9E003F11D963502F
+:104A8000C0AF097E12D48FABD3783EAAA77C26E6AE
+:104A900069B37325E21CCE5876E40743EBC3ECC838
+:104AA0000FC65C9F2F6747DEEEF07D087476B2D2AA
+:104AB0008BE7011EB551F8617FF89C61D4732EE23B
+:104AC0003CC6A5FC2D5FC4D1D517FF4B72D4923ADA
+:104AD000965DF975CBD1CF13C07F3A763F419EFFEB
+:104AE0001941BC45F749646B8C5F3B1061F97B1938
+:104AF0001C5EF1FE3FF8BEA121D59B994ADF7FFCE9
+:104B0000AED14812A99E2E6572B1C567C5B8424B99
+:104B10002FCB7F695946508EB780DFB408FC8933AC
+:104B200009D87D4F3AFD13208FEED1F7AC416D22AD
+:104B3000F8DB6711B0F3CEBDCBCA339CFEC99867D2
+:104B4000B76C00E318DDB3CE601E56F9179F3E52D6
+:104B5000538AF0A23FC165509F67B93D95C933F1B3
+:104B60009C3D846F2FFAF33F6E60F9DA0197D70E00
+:104B70007E09E10FB728118C2BB4EC61C65BB996A6
+:104B8000CD87FC3003E9A9654F6531F84D49AFA9E0
+:104B900018ECDDF2DF5B71DFF7F183E99827B1CF25
+:104BA000E5AF027CD84A4337817D9A4DC701BBF7F8
+:104BB000E3DD371503DC42FEAD03BF391D7F9D4D9C
+:104BC000ED1727469677BF644726EE339BACFE5A17
+:104BD00098FF3A138323B89D9F4FE1FEF278FE17AA
+:104BE0007C9FAAD5E038A9DF35629C5CC885753A00
+:104BF000E237E60DCB93129E671870F13CC7FE9921
+:104C00002C4F8597AD2E75BEE747C93794003C25DC
+:104C1000A9F2578B675947E40B94A4B27896EA5CE3
+:104C2000A2E522B3A773ED7AA427DB4AC2E254942B
+:104C30009EC0AEBF361A9906E7BCF2BBC3D7029E30
+:104C4000F75FD4209EE49947303E9328B1F1F256A5
+:104C50000F744E007F8CFDADEB6049952E7B15A047
+:104C6000F449A7EF8154E4FFD64218AFEA5F742CF1
+:104C7000BF729F05FD0CDD594D985F79EE3D83EACB
+:104C80007C4EFC334856603E656EDF6F314E60DB14
+:104C9000238D9A27FB44AA15F9A62518998E393633
+:104CA000D7BA50CECAFB7E1F04BB43EE944102919B
+:104CB0000E9D5703E7D382CB09FAF5C777DB35B0F2
+:104CC0005ED93C3F6670FF7F4EF1E3BE45C40542AE
+:104CD0002CBF4937F008ECC7E4E503DF0CC27AECDF
+:104CE00071685AC07FAA8BB6A0DF659F05FDACD95D
+:104CF0007D792BBE41CBD92BED18071B7CE5EE6CE3
+:104D0000CCE7A7F31C3FCA3C1F4A65F948F23E8B2B
+:104D100006F499FC04F1C0A8B223A50AE17E8A96A4
+:104D2000693FDF077A4A1E8E9B823F0AF45443AAEA
+:104D30007F07D0CDD0B9A4A566762E899FA7B52DC3
+:104D40007D6F179CF7D9C2FDB907F74F9E85FEBF4F
+:104D50004E598275B8E060F9952FA4B278E248FC0C
+:104D60001FC43CD6DC7DBF657A8DE202FA97758C54
+:104D70005EE44E570FF8195F49F063DEEE751D6172
+:104D80002DC6CDEC277F5CA3C4EC77D6333DD3B2E0
+:104D900093EDCFE3F73797D22FBF1E92334CBF0C62
+:104DA00095FF4E76CBEFE2F4CADFBC6F21EAFD5EE1
+:104DB000BCFD12BFBF1B618FC7F537961D23F25094
+:104DC000AA86C761F6B44DD84941559E4E95959F28
+:104DD0003B34AAFB5F9F64477A10793B29EDCA7286
+:104DE000C8DB8FFE88A0DF4EE415893CA26015CB9E
+:104DF000F7096A8C782ED14DBA307F681C094B12A6
+:104E0000FAD706F0FC6D2AE411D1EF4FA4E662FF59
+:104E10009B8967A516E5A62201FC26C83F4902B872
+:104E2000431B16C178B759713C13E49F24E13E033C
+:104E3000F939DDC7F256A735B0B8433AD5CF504E51
+:104E4000CF6774699AABC73C56915722F24F045E04
+:104E5000AA38BED3272CCA01B928F254D6993DE509
+:104E60006017C1396838BF1C6C34F3BC13D66F7738
+:104E7000632E9E4FFEB27929F17816F929FA447F04
+:104E8000A6BB6CE43967413731EB89706DDCC7EC48
+:104E9000FCAA063DCE63B07106FA2B071B3504EC65
+:104EA00081AA7E03A3C3B8F136CED59330F42B8705
+:104EB0004C204F053D5CCACEA5EB5B08FEE0836D40
+:104EC0003BF34E52DE3FD4D68BCF4193D4ABBD12D1
+:104ED000CFA1CE03C9F58DB4FC5AF91AC8B78966BB
+:104EE0004994846AD3AFFA964CF5C46072F47D2875
+:104EF000DFBEE17BAC3C3EBA45A2ED9BD33E62ED0A
+:104F00008136D3A9D85EFFEFB541EB57D07F7F261E
+:104F1000F1F91C35EE64F4EB3C12413F12D77FA54A
+:104F20004C3EBAAD7AB49FDC3C1F9554F3FC5488D8
+:104F3000F8D0727B5A31C6EFAD44D91381FA0C0315
+:104F4000B32708E387F6F1CC6F6DE4F4403284BFF9
+:104F50006A2008F2AE3DC781DF0FC9E73D8610F336
+:104F60009BB1F18FBE78059E4B1279B684D833671A
+:104F70005F81F936AAF25A133FA729DB33E1BC7BE4
+:104F8000BB8EDBC1BC7CC4E65F88F304BEA4F6DD47
+:104F9000D11B7E5004FC7476EF0FF341CEDDA8A741
+:104FA000FB8451E45A593A936B833AEB4A897EB7B2
+:104FB000C6E66F013A7CC7326F3A1C319A9B54A9FE
+:104FC0007700BCC1E7B480D7644E278ED90C3E472A
+:104FD000B54F823CD476131B37D92F7BF15C847F8D
+:104FE000B6741B85BB5D62F29B7E94887655A19258
+:104FF0000871C8267EEE55CBE58896CB917F6E1B57
+:10500000C897A9C1784DEF135AB0E77FCBE3E2BF51
+:10501000CD519F9FE87133B8C5739656B902E8CF5A
+:10502000A5AB3A524BE940ABF78470FD326D1837AF
+:105030003E602B770FD0EFA5EC1F95423E777BE6C5
+:105040008F4A21BEA7757ADCBE98728F9BD17F35BF
+:10505000B403BC595A4BC1EFFBB5F59748FB2BFA8B
+:10506000F2FD0DF56360703519A359706EFE59930A
+:105070007F3BACFF85F9C7302EFC40FAD1F721AF5A
+:10508000E3A88ED15D3093E7E393EE690994EE0EC9
+:10509000E739785E0A8BBF1E9EC0FCA8547EB1FC27
+:1050A000D18912E621D6CE66E7626F26918E01FA8B
+:1050B0003D3A5968FDF48A1CB47F6B799EC8F47739
+:1050C0007C09B07ED36F8FCA20F7C7B2E76E74EB4E
+:1050D0009481183EBE4951976F2E5497BFE5519762
+:1050E000BF5DF19709B16593D97B10E8F55589DF6C
+:1050F00047710DB1237FBAA420D85D935F4AE7E7DB
+:1051000089593EE54FF97EF1A50A82F5293B8D5B71
+:105110008D50CFFDEF5A5E3FD94D8CD94EC407EA72
+:10512000E9A8C4F3325D1893227BEFB1333F346DAD
+:10513000ABA7FDEC9DAF201FA75835E49BC0EBA5A6
+:1051400046B4C3045FB49B287D533C968F339A8149
+:10515000DEDB759EF5D097D66C50402F572618B1E0
+:105160006FED3FC8A8D7969B0CC44ECB071F376383
+:10517000B95C263EC823A120CE86E7519D27D40ADC
+:10518000F3A5ED60BEED0E1657D796EB51CFD37E4B
+:10519000715D0F3EA109119C7FA58CF9A61C66C10B
+:1051A0007774247CFF34E76BAD8684518EA5B37B86
+:1051B000390ED1FEA1DF83BFD2F6A0DFAE50B91306
+:1051C000EACF1B27E0B9A8C0D0792F5903C015DA60
+:1051D000B97CE867E7F2043F0BF942A55EBE2B8578
+:1051E000309014F80F053B05EC0482FB0011B7CC9E
+:1051F000348A7AD90BFDA60DB567E7E05278995647
+:1052000085352560A7BCF127A0C3B1E445611A9399
+:1052100013E229E4C516C3C3476AAF196D3D0AEF0F
+:10522000C7F20C9B9DADC7840CE04BAD794206E8FC
+:10523000CD768747F1C5940BE9766AAE13F045DB6E
+:10524000D1F2AD35C7F2E518FD5498C6E4006DE71C
+:105250004DA2F01E342919C0BFA38CDBCCC6B57C8F
+:10526000BDE3BAE9B8B4DD411B1D97B6DB663284F5
+:105270003509A38D5FA1C078971A97A21D913F832E
+:10528000AF03A59320F8C10EDA3448AF3378BEF2ED
+:10529000C164361E2954E7FFE49BE9F8985FA6CE67
+:1052A000F7B951DAD4017AFA6953C256A0CF373828
+:1052B000DD1CB6FC433ED8696FCC2B388472267156
+:1052C000790710D10CD28BF246C8C10B69C7CAA1AD
+:1052D0004CE5E18D6974DE0FE41E9D079D1F723C55
+:1052E0009D8FF6A5D95B935636127E419F026EA024
+:1052F00053E08B213A8D835FD01BB9A51713253757
+:10530000533B179EC2EE25A495E5C52B99C3F3A385
+:10531000443EDDD8CAE6D11844B86F74FC18F3E6F1
+:10532000EE18E7FF1EC035F7CA4FF0BE22E29E3FDF
+:1053300001F67714DE7969C9FF7BF0C6DBF997CAFD
+:105340000F1F8BCFC5F8D2AC9D981F1E986DC57CE2
+:10535000F1693C3F36D0A0C1B800DD0FE23EA28526
+:1053600018432097A772BB5C9C5B784562FED6E031
+:105370008B06457D3F517CDEB88279E9C1652CBF43
+:105380007CC87E6F56D07E1FD273FC9C44773193CD
+:10539000EDDDF728EAFB89E613F5FD440BED2171FD
+:1053A0006F8A94329CBFDFDD4390FEBB6DB9589F7E
+:1053B000AE65FA887C83E9A3EE1CA2BA1F699D3909
+:1053C0003411F394785EC146C83FF86FF20B7E9AB1
+:1053D00026A9FCC243E5AFC92FDCE6F0EF023A5B39
+:1053E00058E4CD92283DD6EB997F98D2EBA6088160
+:1053F00074C5D67CD8A7DD445ADFD2E421BDFE02B5
+:10540000E97532A5D73C15BDEE61FC1544212DE8A8
+:1054100075884E0BE3F300FDFB60DC6E47EFEF5B3E
+:10542000605FD36FF0B03C6896D7192F1F62E059C8
+:105430002033785C5A2DC2F33AF4130FCFE5F04DC8
+:105440002C9DA612C61F63F14FAA4C82B69261FE34
+:105450003199FD6FC1B8437CF408DBCF8E805B6B64
+:10546000457A9A73078B7F052CCC2E8038581A1DED
+:105470007F261F7F4EA7AFDA01ED664A0C0F61FA57
+:105480000F857F16AF9FD9DF8C7970B3AA75C7637C
+:10549000ED20212F45DC6D2E6F7FAB7DA60EF2D265
+:1054A00067D7AAE35D73EF64F1B639B3D5FDCC25B8
+:1054B000AB3FC17C4DD2AA03FCCDBD535DFF49DAA1
+:1054C000509C6C02C4C90E713FD020E513E0A3D7F5
+:1054D00093176FBA87D2F9849F149580DFF0869472
+:1054E000C66D4FD0F2B31B2761F9F594EF7EFF280C
+:1054F000D46F29C072355CE204FB56E043CA67856D
+:10550000E577CCC849007DC2FBBD87E07BB7D9DF1A
+:105510003D93B6734FC9C53CD66AEED7185CC8EA4E
+:105520006FBED2C65295EF52D05F5C6D66F7351DE7
+:10553000297EBB04F2AAAB7379B9E4D549503E2465
+:105540007D82F73A9C6BB6CAB00E2DE9CCCF3EB93E
+:10555000500A4FA478A976F2FE9BD9BC6A4B9E4BA9
+:10556000073EA9AE62FD4CF65476E6413BCD792C60
+:105570009F4B372600FE05BFE5F07D95B02B7D5C87
+:105580004EBCE43DD69144FBF519250F4CD1577123
+:105590008CDD4B6665E7037DDE1C19FCF4D3BC2C67
+:1055A000EFB6CAB83C0DE4E12D7E7D29CCCB6E2C44
+:1055B0003E0479118915956598A76D24B8BE94FEAF
+:1055C000C7A7033F5EFD495602109D554DFF82BEA1
+:1055D000660ABAAF56D337E5DBC9E9659796DF2A85
+:1055E000FA360DD3F758F63E85AB02E1FA865AAF8C
+:1055F0000D8D13C79FF1E38E2537E02F56FE0EC3A6
+:10560000D78B7C9801D98D79C0A75D824F6F023806
+:10561000F49A089E8FCA963C93F0807185C7887A69
+:105620002F8E5F057C99E0332F190917FCC9C26ED4
+:10563000657F2EF0A364F07AFA9D973887E1A2E3A4
+:10564000DF910E7AFC1106CF66A995C919BE2F11FC
+:10565000FE971631DF3EF57CCBCDEC1E0337F8CB41
+:105660003076523C6908EECB5807319F00D7E7B33C
+:105670008D3E9B9ECEED36473DD2CFED54A33A28CA
+:105680005EC274FF0F701ED404F7C17E6F21F162F9
+:10569000FC9CD247203DC66E12F0C6E3A9650CB94A
+:1056A0001A3F9F78FC0CAF5B240D9EE2FCE1D07C9E
+:1056B0002F739EF1F68A4BAFF65B3AB97FD139EC86
+:1056C0004F2C84FA5A62F6A03FD123E17EAF96DADE
+:1056D0001F20A76B6B08FA719C560DFA13851D32BB
+:1056E000169F5CFF4D26B76A9B083FF7C8E6174F29
+:1056F0008FA964E07E78D61A950D0B80FF1BACAAAB
+:105700007306B556168F784EC8113250067A7FA8A8
+:105710003C42EF0F94811C8ABF7FAEF622F37B3BA5
+:105720002F4AF8ACF51C2B03BDEFAC1928037956B2
+:1057300067F7FE14D655DC13198FCFBDE91A919780
+:105740007259741ACF47220E7AC4E67F393DC63F9C
+:1057500075568AA09F75B5CBCEE7E7CF017A76D88C
+:10576000732AC1EF34DBD8AA03BB38D1E13F90CE16
+:10577000E4E8175FC0E6179A523CDE56ED7F5866A4
+:10578000C3221EEEE578B881EBD9F39BB4B80FA91C
+:10579000F6163E0DA1A0C09B3A1242BEF5A27E14A1
+:1057A000F7C69DA7065518DA3F6F437DBBF857F53E
+:1057B00018279BB05E4394187D39316456DD7F32E3
+:1057C00079A75355BEA2375DD5FECABE5C557D7123
+:1057D0007892AAFEAA374B54E5B2C85455FBABDF0A
+:1057E000A95295AF1998A16ABF03F43DC5E3374E9E
+:1057F000CF52BDFF68E3F437213E7D5DF43BAAEF55
+:105800004F703F04097A238574FE0B04BD5EAC53D0
+:105810007D4FCD9AB0540E7CCFFE16AC6679F795CD
+:105820001463B1FD2DEC52DB13379028E62BB684C0
+:10583000244F9840DE9DBABEB1AF07F17AA97B0F25
+:1058400026B8E66BC05497C6513B632220825C0D9C
+:10585000798363F1FBA5D6BF80E47FA9F537B8D57E
+:10586000EB6F52D4EB6F2954AFBFCDA35EFFC40AD8
+:10587000F5FA3BBCEAF54FAA51AF7FB24FBDFEA986
+:1058800073D5EB9FE657AFFFB806F5BA67B6AAD750
+:105890003B7BA97A5D73824B54F5F17420E849C8CB
+:1058A000CFBC95F7AADB53A46862E842D0D9025F67
+:1058B00003E6638DEF7A48355E3C7D4C203C8FF4E7
+:1058C0002BD247E5386E7F72BAA07AA96A5C32DAC9
+:1058D0001937C073EE046EFFFB46B73384FC8AD5DC
+:1058E000EBB1FBE6B1E4DA087DC5F7D163EA2BD86A
+:1058F000479B86F7D163D1EFBB84EA591C7C35FA0C
+:10590000CFEEB033380E9A993DFF29545D43DBD179
+:10591000361514DE77613E74FC77CD93D10FF21DFE
+:10592000D2AB8371EF24117CCE23517CFA895D7553
+:10593000BE6501F1E9B95F6409E0A9C938500E7A82
+:10594000FFC2FCA3EF637CEE48D265DD07721CE268
+:105950003FE30939C5E5C9498803D1F23913F7276F
+:105960007A89E28AC1E729EEF7AC9B26A19E255AE7
+:1059700033E6B1D5DD2EA19EAAFB0FF66C1FC7F44E
+:10598000DA88E75281D72E6E1F303BA10F0EDD6201
+:10599000FC90F8AD688F7AECB0DEB43F1687F9471B
+:1059A000767FB1DBC8E0DC2511B9C289C70671DD9D
+:1059B00061FDE17C9BDBC8E0DBA52346C0EF64E230
+:1059C00047FBF031998A3CD6EF24D6EFD15CF01733
+:1059D0009ACD6F7EAB1AF2A9E5E072F4DF7F8FA853
+:1059E000FDF777B64AE8BFFF1E859B3EDD768F1B2D
+:1059F000F4B228EF02B8211E00EDE8FB5477AB04A7
+:105A0000FEB1AFADBF3D0FB1765FB2BFA17E0883DF
+:105A10000BFE603D857F3683D2B781D2CBB6EF11C6
+:105A2000F41FC6FB6BC769A90681FC311DBB97C07B
+:105A30002DAF67FBE2C31EBBCACF44740E38477A52
+:105A4000297B0EF2BE4FC59CD3A07434EAFDBA1F69
+:105A500065B07CA4F6B6C844884B9EE371D787DB5B
+:105A6000DEC4B256F6605E26DCF7E588F95EEFA28A
+:105A7000F531724EB6D2EF63E48DCEEAC3CB6B1E26
+:105A8000698B60BC53C7EF257B34E35EBB3FC6BF69
+:105A9000F2CE386E271983C49E42B8694FFF4E4F2D
+:105AA00023403F5ABB7C2A761F6D70D3FE62F5EE11
+:105AB000C564121B7F58D9F60EC2FD88E4F7436710
+:105AC000867C1236517C1B6438034DDF6FB811E5BC
+:105AD000AFDE76AF07EEA11A0B7F06B77C21567EAC
+:105AE0007E388EDFCFC5E5E7936DD1C9304E7BDBC5
+:105AF000800A6F5D6D17F1FD9A3652C4EA3FC47A91
+:105B00004D8D82F4738AD24204E27AF2800DFCC198
+:105B1000D43E26107FD6B98D186F30B818BCE4A2D9
+:105B20000BE9639E9DC1003EBF4C4A1FEF2FD5E19C
+:105B3000FEFABE4C2BB6BFEF37E30F7829DFEA2918
+:105B40001AB47FC37C86C761F8D373F94964BF0F69
+:105B5000E4803E5DC63885D33E0BD7F1CBF627F007
+:105B6000AE3711CC47D6675AD15EB85C38DD196ABA
+:105B7000BCC7E38FE209E5FF7D1C4FF73DC8FC93EE
+:105B8000F7DD4FF03C05594AFFCA87E96A1C978741
+:105B9000A9C487CFAE362A080DB05E46E29F40ED1D
+:105BA00011D28B8D4DE0A7827AAFEC80D48827AAE2
+:105BB0005D33E1B9A6E26417B0E3DA6B3F8BC01343
+:105BC0006211802F7B0309C155BC98AB40C777F8A1
+:105BD000593981D727CC65E5445E9FE863E54CEFF2
+:105BE0000B523500161747CBB43A6FCA0779BC8001
+:105BF000B073F1FC7E8DCD84CB0BAB736635D4DFF7
+:105C000049F09C8BA8FF09AF4FB31E5F99077A63D9
+:105C1000B6FAFB0D1C0FA9D6E35DD330DEA6AE1796
+:105C2000F1AC64EBF937F1FB2275FD53FC7B9BF57E
+:105C30007C641AD4E7ABC77F9CD75BAC2CEF8DCAD2
+:105C40007E767F03AF7F8CD79BA01EC62F64F55A4C
+:105C500071DF096FD7C9E118E2331E430C2633BF49
+:105C6000F2963623F2573CBFDD07F773950DF39B91
+:105C70007D2919F5DE86FB3298DC495006BCDE51E1
+:105C8000E4A2A877DA65CC37D0BAF5484F062B974F
+:105C9000279C1F87E489D4EA6144C6E4F4A5E89A06
+:105CA00012F005906B59F40FE83AE3FB1AE28F917A
+:105CB00073E94D66E28FE583054E5539E5CE74559F
+:105CC0007BD7EC5C55BDB57492AA9ECC76229FDC46
+:105CD000CBE9CB5C54A2AA17F765906DBC9D9DB52E
+:105CE000D3E54F55B53B5FA824028D9FBA49DCA38D
+:105CF000E631827CB8D7969B0AFCF8B3B60A444ECC
+:105D00003BE527F6B4F3A71B8C59FA5478B910CBAE
+:105D1000CF3B587E7F7B9B879573089EAF6F6FABA1
+:105D2000C1F22ECA9FF0FC699B179FDB6959A1CF76
+:105D30007FA4FD2BB49F1EDA3F949FA1FDC3733354
+:105D4000ED1F9E3FA1FD43FD06DA2F949FA670C173
+:105D5000F329DA0FBCFF31ED1FCA4FB4F9B0BCB65E
+:105D60006D2E961F6FF3E3F3B1B6067CDFD9D68AAA
+:105D7000E547DB96E2F3E1B6203EDBDB56627D2FA2
+:105D8000A793E7F979DCE72BD9BD03F1EBDF9F217E
+:105D900061BB2F9D9F534A157AB92A3FA73F03FC49
+:105DA00002BDEAFC54C01FC26162788C87E36806BA
+:105DB000B30F2791C8720B931F18071FDFE75961B4
+:105DC000A1FC35AE95AD7B4E5F14EBD31AD8784766
+:105DD000B99D405C419251CE8E9B43BB7352A4CA85
+:105DE000C2F207D00F43DC143FE5EC5A7246E621BD
+:105DF0000DC02557503D1E33AF217C39189C80B70C
+:105E0000D1E0FD578E376D692FBB5FA7A62B0C6CB9
+:105E100066F6B6E2FD3AC6B9BEB04C9F2E9F1FEFA4
+:105E2000E99874713ADD2452F976F19B44A1CF8C44
+:105E300026F5FE317D41896A7FA6BDB8862857D1F7
+:105E40007E8BD4FB3C73FEBDAAEF8C190FA9EAF53B
+:105E5000AE15AAFABABB731E71033EC7B1B89961F9
+:105E6000F5720221E485DD4F205CE64C368F73929B
+:105E7000C27E5F6037FF3D13BE7F79D6CEF1655C91
+:105E80008DFBF2090E562C480C6A400F7DFC8B44AA
+:105E9000947F3B9ED1A09F7E22096940DE4CA6E6FE
+:105EA00024D45F01378C6BF1AA262D948B89A285AF
+:105EB000F255248AFB3ABA7FD164D2F56BD1FA9FAE
+:105EC00031D1F2D94CFFB32CBF308CFABA80AF6716
+:105ED00081D8C7AD97E3FDDCC64CF437A9CF257652
+:105EE000F0FD4B8789F90D973BCA53C10E3E3746EB
+:105EF0003EA8CD7DE28D0514DFB6B463F814EF1F24
+:105F00005734A39ED7CFCB94BE5A5EF77AAA4FD40C
+:105F10007C9307F3385BFACF29E0766BC98F22FFB9
+:105F200074E8843C5312419E0D973D8924661E3BC4
+:105F3000DADEC9935121FA116F325F37315FF94FC1
+:105F40009576C84B2CE079D13BDBD2F2ABC70F7F03
+:105F5000EFE37450482235A05F0B8B349E1074E041
+:105F6000B5ABFC31A6FC2E2F9C0B934B8807C4F2DB
+:105F700044D285F729C87FD5623E9A7CF01AA25098
+:105F8000FBD86A0D9360D170BF84FB75BECFE5FC72
+:105F900067F66A9C8F9C25EC260FE874F299D51B56
+:105FA000013AFCAC5BC7D8F4B8BABED04A50EF2D6A
+:105FB0002AD4871409EECBEBC27B40E52D12C9C869
+:105FC0000138A6B9E7837EDF6B413AB6AC2FC79F95
+:105FD00030B859E3AF40FC0E287B35C2E8A2ED9AF9
+:105FE00027EBB7823D3901F06205BCDC915F0D43C0
+:105FF000E717221E17F2792FE4F3E8C81CC23F838B
+:106000008778BC701FEFA26EE18F52CFF3F1D2AA56
+:106010006FC3BDA2ED112DFF9922353E57E92253E2
+:10602000E64BC37051381766825C01B8AF820FD857
+:10603000FC9A9F91C8C61C946B35686F9469303F79
+:106040003D9E2E9B3299DC8F66D8D97DE4EE534875
+:10605000CFC3E5936F2C48C2FD33B35B6C32CB8F5B
+:10606000F47A9558BFF72AE15FE4E772CC1CDEA111
+:106070007B0527B1BC602B89AC87BCB4B1F6F52B8E
+:10608000327370DCE17D3DB55D203FA5CC88795C45
+:10609000AB443EA172549969634F385765E474FA72
+:1060A000A84D9DF7B39DCF6F3B5F8F41A3C87BF297
+:1060B000D616C79CF3A9EBAF473F9688D30E72FF65
+:1060C000E1A0591D576DE4A43078A8ABCA0CF1C10A
+:1060D0002E16A76DECBF99DD6BBBEFC7782F30EDA7
+:1060E00053017AA8E7EDEB57AAFD580B77FA915FB9
+:1060F000E3FD64F17E318A393DEC1FE3FD625B33E1
+:10610000F97EC2438A210E7B6275DE6133EC7772C1
+:10611000089E0F1FA77D01EFDDA6BB812EB84F970C
+:1061200014B1FBA3E2D7FF54961EF1B253ACEF7843
+:106130002BDAA53BCB981CD879E0FC2DE3693F2BEB
+:106140007324D5F98095393A5CA7B7297DC3B397F5
+:10615000909AD1EE293B94A9F96A72EF5AF5EFC1F2
+:1061600034F70D1CB62828FF5E03BA1F3CFC7942A9
+:1061700011F251147FBFC408C23099C10DE7B37644
+:106180006B3E99174B0F6F67CA58FF36A78B2F0DC1
+:1061900057B51AAEB3456FA5CC6070FD0EE4C6B915
+:1061A000F0F194587B46C0B57B8CDF03F8F0ABE28E
+:1061B000A942AD1F62F074FABFC3D36EFDE8F0FCD4
+:1061C00095C3F3B343EC5E9B91F55F519F75ABE1D3
+:1061D0003DFB7C640E88490AEF5F117FEE9329181E
+:1061E00013E6F8EB2DE5F459CAE58F07CF5091C0BF
+:1061F0007B57631E66AF4C926AA15CBE007FF72C92
+:1062000093EFC3021A3F9EBF21EF1946957FD764D3
+:1062100031BADE9D2E8D8A87D22C36CF0347EAB263
+:10622000C1BFF1D83B0602726133CFBF7ECCDE6BBB
+:10623000847BA6051EA15C429F017D741128BCC70A
+:106240004A3F332AD651C6D3B0F1D6C6F18D184F86
+:106250003CA76415327B553AA48573386BAF7D0B30
+:10626000EF7F5B5B2AA3ECFDD2F85F1D87FFF05B3D
+:1062700029B7307A999245E16B91FE90F06D5A0EF4
+:1062800048D17F2A827C15BD1FE71FA078EC91467C
+:10629000E2292D8BD18B989F98BF80DB76DD025C45
+:1062A00007DBBB06541AA5BCBDD017895CFFC1BC77
+:1062B000505F5C2BB3734C6532AEFBDA8AA978EE83
+:1062C0006C37CF17895EA31FF577441670BC3D76F7
+:1062D000F1B711B84739D8AFC3FB3F883CE0BE15D2
+:1062E000EE1FFF8D8CF789537AAA81FBCC0E1C39E7
+:1062F0009F00FBEBF9593A847B3E97878317B535AE
+:10630000781EECC867766D0CFDD76569B97D12897A
+:10631000C039AF3525EC3C8B95DB03D623271B001A
+:106320007E6BC543062986DE66651910AE35FA68B0
+:106330008A87F617D8A72561E6FFC17B1987CEB3F8
+:10634000DA191E5A4A0FA1BD60ED67F735D66529E7
+:106350004CCE52B8F7D2F7E6899FD9EBA1BE948E06
+:10636000973BFCBDCDCED6D35CC6EE4B5A7BED3F02
+:10637000DBE13EC844F81D47D8EFF2790AB89272C3
+:1063800035BCDF482417F8CB2E63BE5A6FF85E2366
+:10639000D8FB822FDECAD562BB47F93989472B0A61
+:1063A0004370AE4CD0B135DBFF4016CC8FF2C50B3D
+:1063B00068EF447CD3103FF662C833DF2545E632F0
+:1063C0003B446F073E2CD46854FC16E1EB269E54E8
+:1063D000FDA3DD733FA75DA1F73B424602E74DFEFB
+:1063E00078716622D8A71D19C2DEF31A015F9B25BA
+:1063F0005F620E8CF32F5ADC0F1E3872BC01C6EDA3
+:10640000A0F302BE7DF875EB6AB0533AEC5EE4533C
+:1064100031BEECD0F0F560FDECD67BDF047F64D4B8
+:10642000C1EECD3A38758611E89FB6D3403F7FA0C4
+:10643000FBF7F004E8A71AFD060BEDB3A6C3778BB4
+:1064400088FF11B06F17756B55F7833CCCE5C5C25B
+:106450008B16128ED92F2CACF80E9E6B5C78310106
+:10646000DF3FCCCFED3FCCCFBDEDE2F878993F5F79
+:10647000CFFA8AFB6F4F9CDE4AFEDD8E3AC6F7BB31
+:1064800060FD9AA5013DA8FA35533FC7F3647F68C4
+:10649000B393B02106DE11F34C22E1987187DA5DE7
+:1064A00034917052ECFA32FA1D9EAF15EBFFD0E634
+:1064B000463C8EDDFF38151E87FBCF53E17164FF2C
+:1064C0000558FF87B6C24BF43F798CFE7354F00F2A
+:1064D000F79B8FEFCF1DAC7BD642F9EE6078C5C637
+:1064E000574BE1F7F70CF87B1BA4AFB70ACFB9EE17
+:1064F00022780EFA81FD7F7A1FF2521FD8AAF7C0C8
+:106500001883BAE83CCF287A269FD88370EF9C780E
+:10651000BE9D9587EB1CFFDE2887EC90676A2C9464
+:10652000EDA0E78C24125A01FB975223CA3911DFE0
+:1065300012FDFE3453AB92B3E27EA1469E7FD86833
+:1065400061F1AF26ABFF2CACFF124D57CBCF681FCC
+:10655000A70B3BF07C3B210EDCD788F88E0CFBC5EB
+:106560003C707DF9089C0B9B97E3FF0CBEFB091563
+:106570002B10EFD15EB1CD0FF9798FF37DE4E3A657
+:1065800088DB13233F75D9F257B31BBAE2E8B7ECA7
+:10659000773BC28C7E75D940BFDAC8CFEB72E07C06
+:1065A000E300BF674E41FBB9AEF430DE475927FC2C
+:1065B000022BE3F356321D604F8B785402E41782AE
+:1065C000DDB086DD53586F61E5FA5F27E1B917BA90
+:1065D0001FB214819CD9AD65FE221E073BCF611E00
+:1065E00034AEC902FC0EF27C97F3FDAFE1BDA7E724
+:1065F000578E473AA8FFE50FF11EC3DDE94C9F0D0A
+:10660000EEB3A13EAB3778CAE15ECDDDE9CC6EEDED
+:1066100095C309253176ECA3195528A73F5E395E4D
+:10662000131B27199FCDE4C21AE1FF94A3E570CE96
+:10663000EAE3D2F03FA13EDD63C2DF1BD3ECFD53A2
+:1066400039DEBFBAC680BF6351B577E2BAB9B05F71
+:106650004C90311F5BB3D784F09C5DC5EE83836F94
+:1066600041EE35EF1D87BFCB566F8962DE64B3D92B
+:106670005300F1C1FABDDFC0DF9F38F1F8C42C90A0
+:1066800083C793952CBC6FFB718A743AEFE3FB26AA
+:10669000B0F79D57E3B96ADB1A8B7F34FF88D04B84
+:1066A000F1F7CDED4E2F3ED707F89968F4801C5EC8
+:1066B00038E45F67F707D6BF199DA524A0FF06F34E
+:1066C00017EAEDA7F0F71DEBBB8FDD49303EE9423D
+:1066D000FA15FBBCF871EBB9FEDAAD8FCE83DFD5CE
+:1066E000AB6FE7F8E7BFF759AF29C6DF9B14F85F38
+:1066F00013771FF3F738DEC5F3C41119EFB9A47689
+:106700004516F88F4EEC3720BD9D583319EF5710C2
+:10671000E3D55358ED944F8F3B9529B0BE0BB2157E
+:1067200036FF76B67F15EFE9F811F8BDCEE83E2DBD
+:10673000E6AF0DDAA30910C714ED4479683EFD5A9F
+:10674000FCBDB7DDE90770DD295D11A02BCD2F6DF4
+:10675000A8B703BF64BF1BF7712909829F34F88E65
+:1067600001F77B07F719D09E1E7C979DCF1F71EF15
+:106770009F359A05F7DC067E390EE5DA6066740B04
+:10678000B3BF4D78CFE4E051FFD53C5E9CC6EFD15E
+:106790004C03BBEFC23E5318EC3EFAC4B843906CB6
+:1067A00073E3FBFD16BC2F883ED9F924698F1B7F4C
+:1067B000378974F1EF23F8FD0359FE0920A71FC89C
+:1067C000A3FD5BE1FB93D8EE42AEFF4A8C591192D8
+:1067D000CEC74BC77E33FDD9F85EFACCCD7E0FA86D
+:1067E0008BD747B03E60F05F8DF3F8BD8DF48C32EF
+:1067F000CFAF7A5FE47DD949B88E026E8A67B42341
+:10680000E3F1D293CDF69F021FF17439B49E9780C5
+:106810000FFC3278BFC03EB68EAB26EA993CE99CAD
+:106820008CF632DE30149327B87CDF074897833A22
+:10683000EFD3A097A2477584DDC3482D03F05754CA
+:10684000B076F516E6F710709CE1E7071A3B591E83
+:10685000E199E73EC89A6F85F3F31FA8CECF0BFFEF
+:1068600021ED2401FC33568F925057C4EC762DC293
+:10687000C57E8F6E8D4EC1DF0B0C3E3E11FD122783
+:10688000F4CA5EBC0776D5151AA0276D3197BF4FA5
+:10689000B07989FBDDC43D6DF17819C866FAB2990B
+:1068A000F8EF823BFE8F132585074BF1BE4A74FF3C
+:1068B0006B20CD52F69A587E3BEA8591F742EA2F3B
+:1068C000F17B82FFBBE553B05665809F6002E8D53F
+:1068D000D376B67FC45B2240BF6BD93C3BE003B8A4
+:1068E000FF82F84E835EC45B25281E4E4BAC3E9E55
+:1068F000CE84BC1B810FA01BE817BEA37D7F9E9D8D
+:10690000C3F63F76273F9417D4435EAAD057014978
+:10691000D6C07D0F271D4A02D0E5C9CE3CE772C81C
+:10692000F7712829B1F676E010C17B0E1438FF7399
+:1069300035FC2E92770AF805773BD5FE8878785E8D
+:10694000A81C40FDF35F98C6C553008000000000FE
+:106950001F8B08000000000000FFB57D0B7854D5A8
+:10696000B5FF3E73662633794E1E8484409824E436
+:10697000018430090F4141074810156878092885BE
+:10698000930710421E88B6175BDB0C24205AB441D3
+:1069900051D18B76404154B4414141037700A55811
+:1069A0005163D5566DCB0D88BC1F31A897FFADAD97
+:1069B000FFF55BFB9C64CE90A8B5B7F93ED8D967CC
+:1069C000BFD75A7BEDF5DA3BDF7C433FD7096175D2
+:1069D0002B42F41022CE6D11629810A3DC82F34298
+:1069E000D885C811FCF38DCA89DB3A5C8885F88D9F
+:1069F000AAAAF9DAB59EC82BEB2D5C1FE375467782
+:106A0000F1BDF1B5FF50F228B3214C0887FE3D5D82
+:106A1000880F311E8D7BEA90DDA70C461A2EAC093B
+:106A20004254AC75FA451AA56F4ECCBA53E685426E
+:106A300075C76C5C99D84AE3966F2ACA1291B21F47
+:106A400041F3AAD0E7559EEACD52870AD1F6A8EACB
+:106A5000DA84F6EB559E8F6AF3B81EA5EF27D6DBD6
+:106A60005CCBA99F0A7D3E277A6BD1C5B994B70A42
+:106A7000ABBD80F2562DDA45FD2E78542DF677B158
+:106A80003EAAF781B5A00BF8604D893A7C32A81E6A
+:106A9000D66994E3BFF7687257D1FCC2E977CC633B
+:106AA000A3E2F7D1FC4EF4D1E6217FFC9330B18212
+:106AB000F2EADA45D1EEDC2BE17DC2A1457B720121
+:106AC0005FB91E039EA1E318F0BC0878C620BDBACA
+:106AD000C54BF0AB7D48F5A0CEBEE64BD180DF982C
+:106AE0003D4547AEC1F7B561228CDAEC3B9CFECE4A
+:106AF000AD348F8BAB55413D8AD23D198982C6DBBF
+:106B00006EF97C2EE073BF4DCC7A91D2D2B7A747F5
+:106B10005B28FD46A71FF5210927356A7AF47CAE6C
+:106B2000DF3EB998F2C7DC9EC482A07A3FD6E92C3A
+:106B3000145F656BFF168D712AD6D8785D065E2EC0
+:106B4000621D34BF8B8D11FEE504978BBDDBB85FF2
+:106B5000034F46BF15C083414F546FA5DBA58FE39C
+:106B6000B31747115CD3B4E19E2EE864C183342E81
+:106B7000FA5B1FE575E67DFF710D7874E09B962545
+:106B80000CFC038F4FA46DBC97BE59DEB30AD193A2
+:106B9000E0D0787DAA42DFCBF6840985FA2B53DA60
+:106BA0008E28099C77FB14AC7FF13C8C57F67198CA
+:106BB00005E5C7F75E9FC7F30AC12BC129B52B7A3C
+:106BC000BF98D696EA0982DFC53E6D7379BE067D11
+:106BD00074CE9BE751BB374C605F5C4C237C4676A0
+:106BE000C2B101F819C6F55D76A66F6F1EE0D7B188
+:106BF0005E57C87A5D21EBFD40307D0B8FC6EB29D7
+:106C0000FF24CC82EFE50FDC94E5A6718EDF3B8E8E
+:106C1000D7753CCE9B87FD753C95FACFBD729DE53F
+:106C20000FD03A73BF659D8D4EC657B7EB8C6B7B0B
+:106C3000427CCB3A37EA7468ACF333AB3BDA8AFA7E
+:106C4000BB55B19C8A6AFB14DF7F8DCCBB56D0D07C
+:106C5000B536490FB56B23FCC0D78566DB047F6E64
+:106C6000271FA0F1BE273D58981E8E8F753F3C020E
+:106C7000F4759FEAF2B9019721EFFC9CF2C7EF5738
+:106C80005D02F9B1127EC40F2CE00FC7538B27733E
+:106C90007EAFCDB582FAF9B4F16F7F04FD5CDC63A1
+:106CA000730B5E5FF1FDB390A7F982AF115C6EC606
+:106CB000B854CEEB57EF19D68872F1E86057A6BBEF
+:106CC0000BBE1402E78A35AA691FD201C1E3D53E83
+:106CD00090E2C63A0C381387CD9A3AA8131EC84FD3
+:106CE0001FD409975ABBD09AF8FB12FB944141FC80
+:106CF0000CF04997E744FF3CC9C7D2A283F673C89A
+:106D0000FC42F98F51CF48FFD2C157CCFC7851706B
+:106D10009EE05019925F1CC237AA42CAAB43CAB761
+:106D2000F7FA9CF940E8F813D3E4BE31E058AAC35F
+:106D300071BB45917CE43EC5BF897E2DB5BAED4B54
+:106D400069FE2F8E11F3D04F995538AEE57DD9CE1F
+:106D5000EB2BB58A86B0027CF7703D63DDD45F43D0
+:106D6000581CE5C3251FA27A13EC417983DF1AF37F
+:106D7000094F93F030D2C55B9D8DC783E059DD1478
+:106D80006BCAD7EE4A6E3CEEE8CC2FC62FC9F46F23
+:106D900022AD7E38E0227FAA77B51E8C20FA49B258
+:106DA00068E169D4EFC583FF1B9DEB66BC0F2F26FE
+:106DB000FC16A8E92F1DA6F5B6ED563D9BD0EF9B1E
+:106DC000F2FC115F5F7A781B7DAFD99B21EE75775E
+:106DD000AE3F148E17775D8A4EA7EF170ED9C30505
+:106DE000C901A5CDF163EDD1BCBFBA84BB5B87BB44
+:106DF000D1DF056B6BF494A07A17446BF4D4207A3E
+:106E000029DD75A94EE431FC7C6A101FFF744F8F99
+:106E1000B12A7D2FFB7DAFB1164AC7E9FDDE6F7346
+:106E20003FB986E6EDDB1DE6D94CF3BEF0E62C0B50
+:106E3000DA5F78B3424F7FEAE5F4B34F53317EB463
+:106E400045D2BB31DE8834294F95598E3E311AFC2C
+:106E5000FFD59E69F5699DE56596822CE0799BAD2D
+:106E60006D2EE67D4111AB95B8CE7EC6A5B9B9FDB4
+:106E700085DD279F007FF8F4FE3E05602B177667BF
+:106E8000E769547EE1E321592EEAF7C27DC91EF07D
+:106E9000856D36F74F99DEEE89F260DF1BFD619C50
+:106EA00025E87FF755C335A41FCBF9523E4F93E336
+:106EB000FA9482CE7EA32DEE5F8F02BFF8BDCDB3D4
+:106EC0009992A57FCFE8198BF5613F778187B2D57D
+:106ED00061C26DE2272B78DEA5C263871C84721124
+:106EE000445FE5A298BFCF6F347F5F407C02DF171D
+:106EF000AE377FAF108DAB5A697D8BFCE6EF82F623
+:106F00008F2F11FBDAF869E2F37EF1D66FC24CF5F0
+:106F1000844FE70F0EE6C7A5B41FC1C79E57FCFEFE
+:106F200015C0EF3D2AAF33745DCBD3D2781D8F44AB
+:106F3000FC636E6B105E8F59843589E07ACC2E1C11
+:106F40004905E847089CABBE3D61FECDD4E4DEFEBA
+:106F50005FA59632DF4BB2E03CB8C305CE47FDEDEE
+:106F600039998A7ECA5617795B83E677D1E67DE444
+:106F7000E79057DF237E4DF58E8DF5378EA5791D71
+:106F8000BB57F5D47731AF33249FF9E3091EF728B7
+:106F9000C23F84F2CF9C4C2D21BC9CDE7C32B534A8
+:106FA00098FE15312B981E8D9466C2EB82AC89F445
+:106FB00018AD05EB09ADD7895FF37C0D783A55B173
+:106FC000A42B7A7814744FE5397F5705E4CE9A3DA7
+:106FD000363FE83362E3170FDF0AFA6CB6B940DADE
+:106FE000B57B542FE474B15BF567E21C6BFE34BAD9
+:106FF00012E7CCEE212E3568DD740E17E37CB9B0B4
+:10700000EB5262592EF73319F244ED9E873CA0DF14
+:10701000EEE6F15C9AFAAFF13FAF99FF9DCFFD200C
+:10702000F146F0818D27B2C0DF890F3E9786FD992A
+:10703000F5B51D79215A8783FE687E2CBF5FF47FEA
+:10704000C5F2A5A359F5FABBC0C39E343BC3FF07E5
+:10705000CF6F02CD2FB1737E349F3DE0CBC63C6B2A
+:10706000DC6D769CB3171DD179E0A7B4A089F989AE
+:10707000FAF9E4067F2D9B2888BF16EE9EBFC20951
+:1070800079A151F1400F286F56F9DC2ADFA0FADD13
+:107090008497C2ECBBF63B219F3E44E5D474BC3AD6
+:1070A000EA8FB3A8FEC2FB54CEEFDBF8D33FDA8001
+:1070B000D70D3611063C86476FD2C7637968913E7B
+:1070C000BF45CD379D56A0B7EC513D01B4DF1CE55F
+:1070D000C1F7B2D5B663C1F4351FBF507FF3D72BCC
+:1070E000FE401AF884B9FCC2309FCE2742BE6F5CC6
+:1070F00035757F02522BEB898BFCE672FCBC4EF39C
+:10710000A9D57FDF9AB9A617F073C129440BF6AB56
+:10711000B595F51D11684D051E2FECFE2C1578ACAC
+:107120007DF57FB24417F8EBD84FCD510927228463
+:10713000384BE7C63716D0FDA5C9C55DD47FB18FE2
+:10714000DC175B6DBE5E9063F76FFC8AF9C1C5DD2D
+:107150005A5F5717F4DBB95F7D4E4B12D280532034
+:107160001DDAE4BA11FB84E4C17B411F9B564DDD5F
+:107170004479E76B364842A2363392F70BF6C7FCE8
+:10718000A07E8D7DB2157C01E930C91F5EEC23E540
+:1071900084D5BABCB0755FFBE4CC2EE6B33ACD26FD
+:1071A000CFDB3E926FCC4D2B0E4F879C61F1450398
+:1071B0001FC2EB7527107C159DBEEA972D51F03D3F
+:1071C000493472DA5B3471FAB8105A24EA0B8F0B27
+:1071D0007016A24F2CE0C77B9ED7AB31DFFC898EA7
+:1071E0003BF06AD0832F56F837D3EFEA46875063D7
+:1071F00020EDB546A351D4A0A9BFEE4BE5B60F5480
+:10720000D69FD43E063E3D2EE0F7CBC8E931C1F80B
+:10721000DB77B87402FAABDE497A2EF5777E874DBC
+:1072200004A0575969BF503DDBE12FEC69E04BCD1D
+:107230008A80BC5C4B797CAF1D65F5FA83E0929740
+:107240002EE1919A9EC570BB60F51E9A08FA73955F
+:10725000DA21D7DB0E974FC079634B2AB5635EFB0B
+:107260000E8F75A4016FB156DE37AB9A8D715B5CE2
+:10727000E83F2AF6039E6F43AE454453BB868FC258
+:10728000FC0C4C87E443613A5C1B02850E7717F8CF
+:10729000F189C2143182CA77A81330CFF3AE5217E6
+:1072A000F0688B957687309B7702F49AB0D8B878DF
+:1072B000CC6F447A06CFFFABD8253CCFAF48BC801B
+:1072C000BE41F27A31F20DBDCB55867DE323BC8FF2
+:1072D0006B1D72FCA83D2A9FA362A443E7DBEFBBB2
+:1072E000CA689CC8BEDA24D083319FA861AF0BF076
+:1072F000E71C8B85E5B3863722D7802F18E51BD294
+:1073000025BD19F858996075817F3CAED3E74A577F
+:10731000B1A320689DB61E161D5EC50EC069BBBD1B
+:10732000F810CE9736FA8E73737FD25407F414AAEE
+:1073300067413F27EA68C764A3DFE90EC07741428F
+:10734000E978B45B2896ACC27E5BB85E1581203EBE
+:10735000DB6093E32EB81C2102433AC75D40F8E39B
+:10736000F697A3F97B8353D66B8892FBE7CE7429FB
+:107370002FAED4D3B57AFA83F9BAC7CCD7CFC7FE2C
+:10738000714BA9E4EF77A653BFD54AEB788826ABBB
+:1073900092DAED80EF893A97088405CDF78A75C6B1
+:1073A0008B40D0381DF52E3B45203E181F6EC6473A
+:1073B000E77A23B9FC445D12C3B1FBFE534C70EC79
+:1073C000EC3FC304C72BFBCFE2F2137539DFD1FFCB
+:1073D000C06EFA4F33CDBFB3DF7EFC5DECD2FA82D4
+:1073E000BFDCED227EC074D3CA7626BBA2FD067632
+:1073F0002FF1719880DCF79553CB7605F1876DE915
+:10740000765D9F0BA480DFFAC43A4E6B775D1A8FCE
+:10741000F66EE20B6CE7D0CB6B451BCF13FC02FA88
+:10742000BD48B6BAB97C97960DBDC89847873CF35E
+:10743000BB489F85F641D89EBF47631F5FB4B64DDA
+:10744000867DAAA9598D08DED707F4FD31B6CF177E
+:1074500079B0D7D5A01DF1BD9FEE5D9C0DF8D48409
+:10746000B5E561DEFBF7FE2D0FE7C8577B16F7C5C4
+:10747000F7AD549FE50F7B5B8D27A8BF7EC2E5B3B8
+:107480008CE84C9BF5FD1FFA7DEB9EFA5E98C736A3
+:10749000D83D482EAC59F656C6F178B021EF83E0BE
+:1074A0005F82F816EB43BBA6A96320DF7D48320F4D
+:1074B000E587EE9672C3D03EC26F4983DCF7E12CBC
+:1074C000F0899A61761754E1F0FC1696B7C38739B4
+:1074D0005C389F9FED93C1EBB3434EC840FBA2784D
+:1074E000A6E754F1AFC96D1B42F64FE00F35DB68DC
+:1074F000BC6AB575F23885F7D131F0A99AB7BF7873
+:1075000047D75F13819F5A8C4BF0785FEF27214359
+:107510003B897A9AA3F5BEABA8DE8C9B9353A11F3F
+:1075200095E8FA9998484019C9FC6810EC20579ED4
+:10753000DB520F7A4DD134C0C197ECF0E0FC1A98C1
+:10754000221CC971D8D0FEF4A934EE57E916C32E17
+:10755000AA60DE03F4353DDFAB69692C9F93FE38EA
+:10756000D0D13F3BAE25C3FB77F00BA3FE8737DFBF
+:107570003A48EBE2DC30E479BBBDE936CCB3AD3A56
+:1075800092F54798F3D0EEC99BC3022AEC8AB6C89D
+:10759000D5D0E73F8A987BB007C1E3FE282D228330
+:1075A000DACD9A79C32AE495FDF1EEA5A0E792D64B
+:1075B000E1C0E7D34E2D2683C6AF72687D1369897B
+:1075C000E7FB68D93138E48BE3259E44F1A0E22E35
+:1075D000E72FE753A2C8F10F476949E8A7C4D2F2E1
+:1075E000C455F8666D617B8368E8C1FD9CB78B8AE2
+:1075F000AEE47F030E47F475ECB3896B2FD3FAF634
+:10760000AD8DF1D4D37CCBEF9E39B796D2F996E20B
+:10761000C4806A9A7716D655E52BE99B4CF2F3792C
+:107620009B3EEF65FABCADAEACE0FD1C3AEF7A4391
+:107630005EF985C2FA20FF50FE155FACFF5ECA8777
+:10764000592E7D300DE7D6200BDB493684D3DE2260
+:107650003DF25D7D9E8FD3BE73C4F1F7D5F89E14C5
+:107660002EDB273D6CF1C37E503C7637E3E9C99AA7
+:10767000488F4A639508B71D725099F0B25CFCD9E7
+:1076800098BFED69A575156668D7016EF3E22DA95F
+:107690001FF03CB48153206F8D92EBF8167993D78D
+:1076A0003155B86C2C94893516C81F535D7229F377
+:1076B00015B93FA609AF0DE3CD101AD7FBC305BB23
+:1076C00017FAC41FA00BD1BC670A1F7F9F2DFC9C1B
+:1076D000DE2A025CFFC7A295F306BC893EE6254878
+:1076E000FA38D95365F8DF8C79BF1791D76719AD90
+:1076F00063CA23D999AC5FADEBC1F0F9AE794FD134
+:10770000E986F6EF3CF483FD3B9DFA997A63C8FE67
+:107710002DEC61E033F3DBF6514B7B87FE14994C83
+:1077200070B85E47E9F5DEC5AC3F15A991C247F8D0
+:107730006919A5FA21771CF22E4F48A075DCFDB916
+:10774000D4837EB75CBC3D84CA7F374615F5DCD256
+:10775000CBF2D464BD9FC9BDC79F869DF5B00824F8
+:107760000CA5B9175DD65E8FA1F94E56B735C45238
+:10777000F984DEA4C704F1BD1B12B65BA1D7DDD826
+:10778000CFFC7D62AE59DF99241A55C079F250734F
+:10779000BD7D800FD1D78A0CA9B788016280EEDF4A
+:1077A00063B9FB477A1FED132FD9E10B793543BB42
+:1077B00007705C3AE9B3B9185758E57A6ADE51D9CF
+:1077C0009E778CE42C2F9DDFC7EBE8840893F208AA
+:1077D000F2A7486E407AA6CECDE9393AE7517EA1AC
+:1077E000CE23EB67143F807D56BAFA732BF072B745
+:1077F00053C2F96E67AA1F76B58AA6C6F1985EE5F0
+:10780000AEA68348CB03C5E371CC2E38B4E420D2B6
+:10781000BB3BF4B6250EDD5FC0F3BF5DA7D3DBA392
+:10782000A6DE3488F6C9EDBBA5DFEBF63E53A74DC7
+:107830004A40DEC6F9EEE8A8FAB22234DA22CFA82E
+:10784000DECD58B7B7F9E8C1785AE7C9BA113CFF9D
+:10785000D3755E9EFFD9BA099CFE3DA3F839AE27C9
+:107860003E67796CD2B6A3D614AA5FE455BCD8B7EC
+:10787000D77A85DF4F74B1DE26CF81F5740E601F95
+:107880008F1934F5F13B30E90C6D27DACFB871511F
+:1078900011C6993CA2C48A7A33BF16223EAD934EDC
+:1078A000BF8BEE8DF557EBF83BBF5761789EDF1B22
+:1078B000CBF06CDF911103F960E9CE8C9E48896FA3
+:1078C0001A7A6F04E0D77ED9C2F36DFF289CF58E3B
+:1078D000D0F64B770EEC897A6709DF2248DE3CFB55
+:1078E000FC7FB883CF95B3714D5F7D02FEF657C91B
+:1078F000DF48B239F118F85FEF5E1ED0CB055DCEE0
+:10790000263D2302E75F8D6E57047F42FE6CB8B4BC
+:10791000E70E7F21652CF617C673139CC31C19B99B
+:10792000C787707F477E46FDBDFC589207FAEFB9C6
+:10793000ED8FA463FCAD4DF33F798CFA3FEFB7F8C0
+:107940006C744E9D174D175E051F7E2A92ED7B7756
+:107950002B342F9CC39B7B713E47B1862FC3392CA0
+:10796000FCBCCF7314B77519F1ADAA171FED057ADA
+:107970007C8D603082CA5F5B1BC17CED359BE7C8A4
+:1079800032F4F7B8ECEFE9FBEF3CB60BE97DD50537
+:107990007752FA65461CE3A1FC814503D09ECE795F
+:1079A000914CFD3DF78A1280BF6AD0BA7D2B926957
+:1079B0007E83371CB5F4A234FF29A51EE9C03E37EB
+:1079C0001E82FDF96F196E6E3F645B9A9A826DD9C3
+:1079D000CBFFC9757CFE9BE582DC759F8FED253A58
+:1079E000E583014AD3998D34D7B0D48F0A348663A6
+:1079F00023AF6767F3B4F76F155807491E98778967
+:107A0000DDC3E791DFB711783EAFE57858BF2BF6BD
+:107A10003D0A7A3BAF257A703EBD4CFAFCD5A87F73
+:107A2000C4CAEB7CE5A9F7A261DF89213DD909BF72
+:107A3000487EDB78D4AFEEE316F087F579E2FA09F9
+:107A4000804FCD8E9D1BB99F2A8707FA6EC5CE4BFE
+:107A50000753202FDE203C99A0C71D32FFAB42AF59
+:107A600047A5A5566CFC52E65B8A395F4CDA27FCC9
+:107A7000FEA24CCA498FE8E7A068CD637EC924EE18
+:107A8000EEC4D7AFA818E5EBD37CC9B06F1BE727CE
+:107A90009D7BA9FDB065ECB27DCBD85B53192EDF81
+:107AA000F3DCB3EBE797D1DF2376E173523F30DFAE
+:107AB000C09EBEC12ECFEBCDC467402FC6794DE32B
+:107AC000E6F593EDBDE0AF29AA326807C123E59141
+:107AD000309637BEEFF8B36256F1F96DC85BB5E189
+:107AE000922FF2D941ED5F88D2AEEE370C76327923
+:107AF000DE0BAB3B17F2C8E351DE6BFAB1BCD59697
+:107B00008A35D0397A1DE653A392FC9511247F451E
+:107B1000C67DAF733410E52D42FBEF5B7F6C04CD67
+:107B2000330629F1EF68A486DE455A4897FC397D73
+:107B30005B13F8F34361923F470D61BE64AC33744D
+:107B40009C03C40734E23B6FD039A3113F181739A7
+:107B5000C6CA787DDD527590CEE522390208DA1A60
+:107B60003B94F3DE28826361A42AB42EF4472325D4
+:107B7000BCCDC73AC7274498EA1525C4DAB18FBFF0
+:107B8000EFFA551D4F6AB83CBFD47083BFBA137467
+:107B9000BF7DC8FAE57A6F770E63BE3A56F97EEB81
+:107BA0002EB215DF093C8F8BCCE773735CE4942312
+:107BB0009AE075D4E17BE87A43D7251CDF4F8EFA33
+:107BC00089227C16ECC7CFED6C776BB6B53EF75BC0
+:107BD000826BF3A25C0FEC472FD3BE70809F4EB533
+:107BE000B39CDB0CD992EA37F770715CCB6BBADFD0
+:107BF000DC375B6FEF147CBE34CFEEC57EF45E6184
+:107C00003410EC48F5D26FD26C5BF216CEEBE6E5A1
+:107C1000291E9A8150C1EF69CB7CE497FCBC5E09B8
+:107C2000DC0A7F81EF73BB40FD75B1FED5E9945F3F
+:107C3000F78B0C9ECF47A48FD762BC8A70E65BEBB4
+:107C400062BDC971049F97FFA1F279B22E9FF29194
+:107C5000CCD7D96EB36E8A37197EAD041D6FEB3663
+:107C6000CAF25EB093A23C4DB6FFC426EBDFA2D7AA
+:107C70004BD0F1FBB14EA7B4FF993F689323ACA062
+:107C8000FF77FB95BEC6FB467893E1177AAC3C9331
+:107C90006D98B754DE90C6F4A4DBD366E9FCDCE84B
+:107CA000170D1CC3214FCB9FD9F3373B41DF332A3C
+:107CB0009C47211F7E54B1220A7AFD0C4D0D842170
+:107CC000BE6A7A91B743AE4BC7B85E396EB9A11F91
+:107CD00006CA00DFBD6D0E712FCBFF8121C1FA9660
+:107CE00081E745FABEAD6E1AF360B07E5D6927FE8E
+:107CF0003318E5723F57456ABF077DD5EEBAE1C13B
+:107D000060BDFB54F94379BCEFF471CFD5791F3CCA
+:107D10009E09396F02A7C6B81DFA11F049FDF6D5C4
+:107D2000CF73DAEF3E0BF0DAE494FA92B5EDE38527
+:107D300094AF9F3580CFF709531D5ED8F5DA77846D
+:107D4000F961AFAD9F15EEC5BAEAF744F9615798EE
+:107D5000A7EF1BD2BBF8BB6FBB8DE9ADCAEE7F6648
+:107D60000BB5ABDADB9FE989E895ED96BE57236446
+:107D700079B4376DE55094F764FA79CDE68EE1F287
+:107D80003755C1E5E181AC5882779B533B8575132C
+:107D9000BDB2FDBCCA2EBF1FD1E912FA25FBFF966A
+:107DA0004471BF42CF6B3F8F677D4F58BDC9F39180
+:107DB000BF7D20AF47B3CB7D216AA47E78C425E781
+:107DC00075A4399EF785418F478AB7DC939580EF7C
+:107DD00024AFD2FCFEB24C0DC01F6ED09F32F5F224
+:107DE000DB5751BB4F5F55D96F33E7D78B0FE3FBA1
+:107DF0009C15D51339ADBC6B329FCBF51FA7EEA2F6
+:107E0000F284A9A7D8BF6BE07F4E95D99F9A98E9D5
+:107E1000553381DF5CFFF68354FFE1D9271600AFAD
+:107E2000C333354726ECDBF6D697FF4CF36D5DFE8A
+:107E300027D6A336446B11F87E71F7D35CBF66C5B5
+:107E4000FF2C807E50639574639CDBB53A3DBF91F7
+:107E5000A9C5A2FFAA15BF633D2222B745F2D7BB31
+:107E6000BE1F3F3AD3BCF96585DA2D0E6FAEE154E3
+:107E7000F5E7E1FC3BAB04A2950C862BEB75E75CC8
+:107E80008168E047B348B972F1D610BF315092A86B
+:107E9000DB8BA8DDE226558F57F4DB41A7A1F51750
+:107EA000D377AEF73DBF578A26F93D76D7FDD73059
+:107EB000FE4500FEAE33CF646E023D9CDFF9745682
+:107EC000B09F3634BD72BE72FDE7F47D738EBED8AE
+:107ED000406FDBC24CF6850BCF24EBF426E9E9C2F8
+:107EE00033D9ECE74ED4F7D905C5670947BB5F081E
+:107EF0008E67109EA6E11C97E36D1A0EB9FB619D7B
+:107F00002F2E8E6F1A0EBE67F041E168CA63BB4127
+:107F10004E531EF464837F8AE2A62CFEEE6FCA42A3
+:107F2000FB972DD20E63CCA7F2B9148E7BA2B5F0CD
+:107F3000FEAE7C6EE026E48D71EA9D92EFD43B2587
+:107F40007F095DB79629EDE8A44FE61EA7B3A43ECE
+:107F500096F4825CE49365DE29F30B3794D8E16FE5
+:107F6000AFB7C9BC6B7D89FD18E6F73569B5C44F5D
+:107F70007374BFC5027FA9DD0BFBFEFAE5E11C3F70
+:107F800031DB3ECF4B69F67ABB695C030FFDFDE642
+:107F9000EF8BF4F9F40D890BEAA5B6ED0BC339F6B6
+:107FA000A4E8328E6049A6B4E33EFB6C477C91AAFC
+:107FB000EBDBC26DD0A15BEA1B8CD78FED065EEFC9
+:107FC00048A1F92FD6E3A55EB648B8FA9E957CE3A2
+:107FD000E57C2D05E7D505C01DE75C2CE57321EF99
+:107FE00049BC1979035FA1F05DF1F18214D8959F26
+:107FF000C894F6C7507C2C8F1ADE13E5065CCFD4EC
+:108000001DCA00DC8D759DA8F37AE968EBB4BFAF9B
+:10801000CF77688C8F7C47307DD76F1D7288242086
+:10802000716EABD58325D45BFDF743BFA8DFAA36BD
+:10803000F904973B80977391FBDF41BD051B620BF1
+:10804000A00F18ED17AE2FF29607CD7BE056335EEA
+:10805000063599F3837799F35B71060DFBE7DBE552
+:1080600007CCF92187CCF9931FDC7133B64F85EA31
+:10807000BB5F85BEF3E7F187704E9F7AF99568E0A4
+:108080006BF15FCB0F428F0B8D67213C2AD0737C45
+:108090005B14A6972BE25ABAE14346DC06766230BF
+:1080A000DD540ADF416BDA95F5CF8AA69BBD4467A4
+:1080B00055CBDECF907AB3EC7764D35A3BE4CED085
+:1080C00071BBE33B22D2EBC63E2A1921CBAE5E3612
+:1080D0004E7C8AFED6BC371EF458F22B85E59B9267
+:1080E00097B25F07DD1CDD3EFB464E6F9EC0F03051
+:1080F000EC920B9B954014E55D2344877F1FF18B29
+:10810000A50D21F19F6B42E282D699CB17EEDAF7EB
+:10811000FF104750E17882E32EAE8C67F41F805E3B
+:1081200059794AB07DAAF2A96FC2CCE5725DF3F528
+:108130007518E7ADF05DCBF17B57CBAAE238FEA313
+:1081400073E9A84B3B8573CB3877AF5EB75195F297
+:10815000BCB784FDC891768E8BAC76884004CDEB9D
+:108160005094DDEBA2EF97D647B1BCB280E45CE857
+:108170008B940A27C74D7A62D0EEC4BB2ACB65D553
+:10818000F1121ED5BF51FCB01D57C3A88BFC933212
+:10819000BF4804D8BE0B3AF206AD03F80BCE8B46AF
+:1081A000A95F565903FB009F8E7368ABB95E15AD8E
+:1081B000F3A338C87BE6EF35A28DEBD7EEFA262C79
+:1081C000F87B903D9AF55E43FF5675F94AFD653898
+:1081D000CB4F74208483BE6CBADCBEEE1E92236843
+:1081E0007D2B0D7BF85A29DFDDB2519E63249F67FA
+:1081F000014EEBD6927C86EFA46F20CE442C0AF77A
+:108200004BF95EEA0BEB6667B15CF4F23F5E0A4045
+:108210001F697B4861BBD2BA7CD9EFBAFBFA7339CC
+:10822000F8A7C2E384B11CB66E8A51DE87F5914F80
+:1082300030C564C8F9FAF71E6EFEDE4BF566C13E26
+:10824000221E74B27DC490FB0DB9BE2E56CBC91A46
+:10825000D6B9FE75B16D51F0BB898AF8EF25B76CC0
+:10826000D6CFE3365A3FFC2AC795E283F08F19F543
+:108270004666C97365F858EF16BD1EFB5FCA2D53DD
+:10828000EEBD8EE655FEB0C50D7BA18107E1F5661A
+:10829000010EC7D73A0B4077C3C74A7BD9917CC937
+:1082A000E723860A8E371AABF73B36CB624A93C276
+:1082B000891EA99FE345D21E1F35B498ED9624135D
+:1082C000CCEB2A6E65B2DE4FB9BDF8F7A3BB984F71
+:1082D000075D144AF9FBF86DCA26392F2FC7270E00
+:1082E0007FC0C9F6CEE3FA3964E081E86818CB0FA5
+:1082F0003A5F8B0DA19BB5A0079C87A00725986EC0
+:10830000CC74718B22E12BEE93F2F7BA589937E8CF
+:1083100082F43FF1BFA09B22C1F0EF4E0F34D6DBB9
+:108320009D1E4874B00874D0512F840E84D53FEC44
+:10833000DBFC42A52362872B848214ABF021CE178D
+:108340006724C3EB1EAB1FB178BDAD122F7DAC927D
+:10835000EEE8B4F18517707D2FE27D4B1E5C28BCE2
+:1083600054BF2445B07DAD1FC9553171DC4E204549
+:10837000588E0ABB13A5685F1223FB2FE92938FE2C
+:108380008EFAF35AE274E6361CFE5EC17205DA47D5
+:1083900017707B9F45B6F75A29ED9B21F598B69546
+:1083A000611CBF5C72779F2CD0C9C4B1663A39A2F8
+:1083B000D39591DE94EDD68D759E24F083D286FE02
+:1083C0007CDED43B8BAB77029FCF47B0FC59B2EA3F
+:1083D000C79386617E2FC47B80C23393B7B33FA817
+:1083E000B461F64F3E84BEB4D5C9DF2BB2B5F559A2
+:1083F00090FF15F7DC9DF4A174C6017B12B5D79AE6
+:10840000A69C7F95D2C9BEEDEF409E983C5DE5FAF3
+:108410009385B43F8B0639CE24DFE7D624EA6FD2AA
+:108420002885C3698E3A5DA9B7C10FA4E3F7A92CCB
+:1084300045977FE43D8192557DB2D273E13F21C9DA
+:10844000B80B39FD53A3FE186503E4A5BEE3E4FEB3
+:1084500033EAA31FF47B3A4BCA55BFD5E162E40966
+:10846000AE5CBF7C75D8D18C68A4B64036A5E9FD5A
+:10847000C7BE84754E4C17E3D703EE77AA6213CFBD
+:10848000B7AD84F94254961BF4AB9142CDFAE3D6D2
+:10849000FECC278F8E693B7A37E58F6E1E24ED8CDC
+:1084A000BA7D61BE4BB07C70748CE4776D9B239871
+:1084B000FE8FB85AA3E2A43D8EED0D653A497CB615
+:1084C000ACFE7EF8B9CB22ED47717ECC7F681AC72F
+:1084D0002794AD530361B807B0C66C6FA88AD4DE89
+:1084E000C67E08B51B84DA074033A0A3F2350AD351
+:1084F00061DF7A8F3D99F99CE2C2FACA2303FD70CD
+:108500000E947B9C1CC77C85FDE06B82FB70D8B908
+:10851000050789B5676B9F004E258D25ACEF46E4B6
+:108520006ACCBFFAAA0417EC179DFE26C25E0BBEEA
+:10853000646D4DC6BEFC55969BF13031CE9515C984
+:1085400074EDE4FB11476DAE2CCCEFE84AA705E7CC
+:10855000EDC41592BE69DF39708FE11EAB08073F8D
+:10856000D89A25FB9DB3DC5ABC91F2BD1DC21A15E9
+:1085700007FACA67FA5ED85FFB2DE675EA17620450
+:10858000E489B2356BE5BC74FA10D696C2781AE766
+:10859000D4E6B402D8013AE4DBFE63DB01C70EBACD
+:1085A00098AE303DD07A0EC18E9CDEBFF432CAE95F
+:1085B000FB3ED0CBC4B1817E881B2F52AB38BEB6F8
+:1085C0003D4978E0776C176D2C8FB4933C02BE6701
+:1085D000F019839F105D781D899DF8DE5247532264
+:1085E0001EBEB5CEC1E9B3752E6125786FAB4BE2E7
+:1085F000FC0B756E4E9BEA72F8FB8B751ECEEFA8D6
+:108600001BC1F997EBBC9CDF553781D357EB8AF937
+:10861000BBC1AF083ECC970CBE63F02783BE0C3EB7
+:10862000154A577309CCB81741ED991F1A7C10EB06
+:10863000B01474F22703CFE94AB12F09FC50B4CE2D
+:1086400006FF2852CF3DFF0AC1B9BD2292ED22EDAF
+:1086500042F2C1F648079F07A976B10BF689FADB0B
+:10866000BC47EF0E3A876FAD508435888E7FBCC40F
+:1086700029AC41743C6F59AC293F67D9FB6FF4A416
+:10868000FEDF8DD172B3691E477E79E2F13FD1F7EB
+:10869000DFFCF24C26F04EF3D8FC08C6BD2B5C9FE5
+:1086A00047AB9CD75D769697FA864B7DAB6FB8D477
+:1086B000B7F0E3088ACF3DA2E3A3242DF69DA7B12E
+:1086C0006FECAE9B47C04EB452DE4BFA04F8A3F2F7
+:1086D000BFE8F82B5D16C6702D6DD0F76B70DC36D9
+:1086E000C1F558B260F94EF10A01BFD7B15FD803A6
+:1086F000242B88638AC3AF407622E56B0EEC98ABDF
+:108700007FF711E47665D92196B3354724C77F08F2
+:108710009FED5C707FCAB2835C4FB4F636C56F467E
+:108720000CF5DAC13740E3C05F69CE7E81FD2E1AB9
+:1087300015BE7F54AE7F2F5FAD98E2A26764ABF2A7
+:10874000DE459695D3F359423F471AF9BC32E89675
+:10875000F808C7619637E6DB1704F1E752FD7B594D
+:108760008EC514A7797F969DFB398FCD49FDDE9B81
+:10877000936E9FCFFCCFCDF7058CFAA53905AB6082
+:108780004F2E5D83A8A6CEF625D9567D5E2EA97FF5
+:1087900039E85C8BE2F8A22ECF07439E39855F470C
+:1087A000F2FC59EFAA7CE1B917E08FACFC73189F7B
+:1087B00053958375FB4AAE7FF8349683BC91CA709B
+:1087C000C8E112FF85CFFD351A715DB53BA4BD9799
+:1087D000D2A3486BEEAA60FB5E8D87F6491CF8AD0C
+:1087E000D9EFFFFA0B7FE6FB9D84B0143D6E98E352
+:1087F000D46A767CCAF16BB0C7F986727F1C5F1DA4
+:10880000DABE56F99AF557422CC3A768CF97893C30
+:108810008F9D9712C1E76AF7AC4CEC2A8E28B41FE3
+:1088200023CEC1B0FFD58A359FC3CF597BD7849360
+:1088300092DE65FFA1ED1ECA8E4A38315020C6EE89
+:108840002AB6935805C79F2CD5ED38EDFE4CF6633C
+:10885000772777D7AEA7462492B55BDD3188B3BEC4
+:1088600028C484AEF0F449B6946BCFD33E823FFB6C
+:10887000E23695E5CA8BDBA2783FD46C7BF020E230
+:10888000046B9E52D8ED582D5A38CEAF66872A1CFD
+:10889000C1E71DEC47F1DDCF73F173514B405F8BA6
+:1088A0009A14EF669A4FBBC31DD323683EAF80BEB8
+:1088B00088341787350D47FFC6FC9F077F0B92371B
+:1088C00017353FC8F18D54EF02CB37BF8DE0383CF0
+:1088D0003AC9DEC13CCF6E18C2FEF5454DDB6B5880
+:1088E0003ED816E182E9E98CCD7C0FE4803EDE8142
+:1088F0006C298F9CD5EDD1675F50591FC23CB12FB9
+:10890000CFE871B846BB37F5766F664BF9A7265BA3
+:10891000EE4FA3FEA2A6A3D1FDA8FEC95DEF73FA98
+:10892000BEBE6F1645B6F03DCF933B22F89EE0C920
+:108930001DFF39FE351AEF7CD3980425689F9DC82A
+:10894000B6C97DBA41C62FF32517D6139A783D676D
+:10895000B7A528AC2F03DEA4B79FDDF112DF4336A5
+:10896000E4EB1F1C2F384BB186DCA3183D08728D39
+:10897000A355BFD7D1A6DB63FE6FFAAFD1BF27598E
+:108980008AF571E43D0D61C46FB864BD2235B72727
+:10899000F6DDDCC1EE99B8972DDE927197A2B7FB98
+:1089A00011E87F73DF8D67BBCB529BBB27F25F1C47
+:1089B000268595E0337788CE57925A87C1BE7B349F
+:1089C0004DCA15863FAD6AB522BC04BF5E44673E02
+:1089D000E4FDAAD06007C949677C3D5661F1DA71B0
+:1089E0003E46D9992EEAB73B37C1BE75C42E7CEC02
+:1089F0007F7BD129FD27E9D20FF218F617A5557113
+:108A000081AC78D8F174BAA99A4AE541F453B529F2
+:108A1000900539EA9C5DDA2B510EFDA9AA40D6AB30
+:108A2000D7E914FDA0DFA369AE0B2CF7EE8C12D0B2
+:108A30003F2CAF4449BBC8D3CE4D6141E776BF1C44
+:108A40008B1177C7FE4ADF66393FCC0BF2FC227BE5
+:108A50006316E45D63DC45D18D3CDE397DBC45E1C8
+:108A60008DD29FA3C711A23E8F6F13EC776A7B262E
+:108A70008CE5E633C92D2F63FC33CFF4E7B887A329
+:108A800069FE05BBB8DCC9F1E795CF860530DFD3B9
+:108A9000CF44B15DEBB44DCA63A7A312591E3B147A
+:108AA000F5F05CF6633D15A6C02E745A11F62494B9
+:108AB0006FEEC1F24065DD32F6D754127B811C4B5C
+:108AC000E904C87FA737F7677BD1E93755BE5C411A
+:108AD000DF57E3BB261AE7FE8CF58008B6239E79A4
+:108AE000F66FFD83FD3B465AF994D93E66D083511B
+:108AF0005E9423F960518ED4536EC871715A1DD1A2
+:108B0000F4703AAF53F207C203EB81B41F1361EF65
+:108B10003FD2B43B5189049C0359FF09B86F95FAC1
+:108B2000D6996D36F65355BE12E5653BD4DD57F147
+:108B30007DC94A55CAE3951679DF50F9E556B6FF67
+:108B4000D43FE32C003C08DEACDFB66D56F571E493
+:108B5000B8A7B7F4917E8D809E7F7910FB3526C62D
+:108B600089795359CEDA9007B85E7A2A82E3FE6992
+:108B70001C2FE2342A7FF67309CF9805AC27D0C1A9
+:108B8000CDFCB94AE7CFD5775F1383FB10E25D9543
+:108B9000EF795CB27A7A82FF86C2EBD11C9D3FBF2F
+:108BA000FC38F3832ADA37880F5BACFB13173FAB33
+:108BB000B05CB978D5358F30DF7DC726702FE25C89
+:108BC000D383D1C1F8A8CF91FCB0B3BD87EB2FA65A
+:108BD000FAB2FD5BD13C9F2D360FE6138AC7EFDD5D
+:108BE000FE59F507B5AF6C22F922EFCAF55F122DD9
+:108BF0003FFD33F8CB3627FB5109FF7C3FEAACAD94
+:108C00006901D67FF67927F39DB3B172DF9FA4F394
+:108C1000D4978DF9DCF46BB6CBFC619AC039B4D033
+:108C20006FEED798D7EA1C9BA4B7784F0CFC44D5BD
+:108C3000840FF447F8F911B77FD7C6ED43D7B34097
+:108C40006FD7B14F9F8F60BA39DB4BE2E5EC0BD9A0
+:108C50007C9E1D8D95F44EF34D85DE743656A6B878
+:108C600099047AA874497A383BA689ED026795ED94
+:108C70009C1EB5C97695CB747F3BD15F12E807B4D3
+:108C800009BBAA634D0BE419F0F9E1059C06704F8E
+:108C90003BD48E0E3AC5F9D7AAEF33E31D05F6EBA8
+:108CA000B09FA789EFC76BBA3C59B5ED4A7F25F055
+:108CB00054B54D617FDA7F19FDD0AC130C3F00D164
+:108CC000E5629FC2EF222C6EB86D11FBD396ACBD4E
+:108CD00015746FAC63B17E6FFCA8A2F27C8E3A690A
+:108CE000FFE45E399E01DFDFE7281DEF75B88CF3E6
+:108CF0008BF6F03B396E4947946DA4FEAA1A943561
+:108D00003C4E9AA1E7CAF5197022B0D861E73BAA98
+:108D1000DFD3EE6EFDC63CBB9BCF319DCF1F4D9385
+:108D2000F793DBDE96F7CC2F7D3D2426EE5BE44106
+:108D3000BE6160F487B863D020F5F322F81CF635E5
+:108D4000ECEB34CFAC0D66FF4ECE53E6FC806DE607
+:108D50007CEE0E733EAFD99CF7BC6ECEFF09E30EDE
+:108D6000EB8413F46FC43542FF460AFDDB1D26F584
+:108D70006FE4A17F2385FE8DEFD0BF9187FE8D3CF0
+:108D8000F46FE4A17F2385FE8DEFEEFE124E55BAFF
+:108D9000BD1478E0B8BADD4E233E81F7CBC5D98942
+:108DA000CC478555EAA51717E5B2FCD8616F9AE262
+:108DB000607B93118F9518AD85F7471C80D2B22A3E
+:108DC000398DDBB11DBAF6556987AE2A7046C2EE01
+:108DD000D1BAF2E42A883DA7A3B418D4BF686BDBEC
+:108DE00002F8562F3BC07EFFD6E5EE77AF93F863CF
+:108DF000FB8B115F5582730F7C9BF4251977EE7105
+:108E000004DB5343FD44624D501EF2D33A733ED40B
+:108E10002F04BEE635EDAB46C6C76F6C6DC9E0FBEF
+:108E20009F3EE3E0FB699FEAF63B31CBC1F298211C
+:108E3000CF23CE1B70597A9FB209E795A77F1CC339
+:108E4000B9FD50A6E97E61685A767908CBF31DF921
+:108E5000358A05E3944F5FBE8FF56ACDCBE7D2ED3F
+:108E6000FADCB2D75B4CF3EEEF0F37D1D1C0AD7166
+:108E7000217ECC5EA6FA8377A587F8310798CAA72A
+:108E8000AD1962BE8F5F7C8DA9BCAFBD236ECFA133
+:108E9000FBB9E4FC5CB2CEA5C8025E6F68BD54C5E8
+:108EA000F327F86FC5DB524E2DA773C61BAFBF2B40
+:108EB00052007F9D7732E057D1648B859DAD4C3F4A
+:108EC00087C432F3B95C61153E575C27DD55B88421
+:108ED0003796DA7F696D4C653AFAE547A92A8168C9
+:108EE000D180963CE8AF8BDE7C7238E8AA5ADD98D8
+:108EF000EAA2F23B14FF165C203F13B73D712495A4
+:108F000027A95A497FC273AA2D70FF1CF0D1ED1911
+:108F100002EFA47CBAE6A5688E1FD4E92FD5E60A35
+:108F2000071D6C6C54594F81FD4C8DEBA4938D8DB6
+:108F3000F1E1D06B2AC6283EC8C7065C0CFA08854A
+:108F400007C9EFEFBA69BD970EC9F7948C752E75F6
+:108F5000C9FAA241B637DE0730D67B5CD7472B373C
+:108F6000BE91753B7D3FD77F5F9E1B7EDCBA5DBCAB
+:108F7000EEC5966D5B92297DC7A1DD85752D7D7B44
+:108F80005CF4481AE7CB6D32AEFDB3754F3EE1237A
+:108F90007E7A77E39376E80F9556BF9DDFCD7966AD
+:108FA000A31DF10ED76FDDC8DF176C2D617B8071BB
+:108FB000CFEE941197ADC3A362ACB2C145EB3CDEDA
+:108FC0005FCA8515E1329EA6481DF54602D6B55505
+:108FD000C9C7BAA6176FB7E3FD8187F57AA1FBA6CB
+:108FE000FDF0B4A21EB07B35291CC7D4DD3E99111B
+:108FF000E8CFFB64DAE5344EA75F1EC87ADE8782CD
+:10900000B42F9C23B921FAF56155DAF59A55F94E3A
+:10901000983D90300DF2C25EF96E45359D43230AAE
+:10902000A0B70B7135A5C5A354139DD7164698F666
+:10903000C12C11B4AFA8BF9B452F537EFAC40C536B
+:10904000FD99D30786F89D0B3ACB997F5D6D7A8F9A
+:10905000A6FA2E9F5B61BBC758F3774AEF623ABB13
+:10906000D1D4BE5A4C35BD47B3E8A9F718CE4465F4
+:1090700076C4E154E8F758666947F5EFADFC9D16F4
+:1090800062DAAF7D333C7F92E7A58DFD09863D7D99
+:10909000167ECFE8EABC0CEF881745BC30EC1D9A71
+:1090A000591E69613D55483C54EBF6A8EA1C698F8E
+:1090B000AAF6B5D8118F4DF0B7A610486A1A15B6A2
+:1090C00037527D474A9CCCDF85EF3BCCF752D0DF4F
+:1090D00065941F524BB0BF42CB6B68DD38176A6096
+:1090E00047623BD884936C0733C6D1FB37E834F42E
+:1090F0007D80D0FE060C7033FFAEDCBAFD602F829F
+:10910000CFB4E2D87CC49D54354DB195E45E496F2F
+:1091100006FFBF546161BF7EFBE1034C6FED155646
+:109120008F8C4BFF76B8D478A5DD35940E17D0BA66
+:10913000E07F5EB043F1F815590FF0E905FA0C81B4
+:109140004F4A177033E0D501BF90727E3F6E28E220
+:1091500026E47B0A57C025149EFA380B34C17227C7
+:10916000CDCBCFF30AE9578C08DD8FB7DBD9FFB041
+:1091700041112EE5BBE131F5B2B4E3F4CD90EB6FD4
+:10918000DBA97820BFDF7CD9CADF3BE8A758C6D966
+:109190004F9F68DEAF1DF4542CF7CF8CCB89DCEEEB
+:1091A000DF4557DF454F86FF26347EDDB847E61999
+:1091B000A0DFB71A26867DF34FC4E11BF24177E7A3
+:1091C0004CC739E4D2F11099DEE5F9BC342A9DE3AD
+:1091D000CC35DDBE68F0694D6F678C5B42E5EE789B
+:1091E000D07B6F7E67715543466AF0FB37DA4A1BC6
+:1091F000DB815397C7735AE27425E27C29592EDF2D
+:109200006939764FCF44F8298EADB4254CA4AE8F82
+:10921000DD3934550C42BE88D34FD786CD0AB6CF40
+:109220001BE92D03E4F9619CEFE72D87A367613FFC
+:10923000AEDC198D90A1C52BDF1FEEA273BED9A2A3
+:109240002D1AC0FEE08D7CCE0BD7C63CD8E70C397A
+:10925000A37265514FC80355FF38F004E4016DB99E
+:109260002D1172EAE90F5481D01A3AE758BE38E559
+:1092700094F47D6A7304DFAB3CA5082FFC518BD4BA
+:109280007D792ED379DB7C33C68F70D2B8C330AEF4
+:109290007F4B12C6F5F8B230AEB63C33A62BBB8B73
+:1092A00091D6AE97F2DF16C3CEACDBA321F7230F26
+:1092B000B95F644BB91F79C8FD4821F7E37B0DFC0A
+:1092C0000EF01BD7B7E5436FF58D15394BF81C8EA3
+:1092D000CC815C7FBB12EE013FBA5DF1F4E478848F
+:1092E0000F62E5F91B8257231DDD46B25910DD5E82
+:1092F00077D92182E3EBC68858537E9C23D954BF8B
+:10930000C895662ABF3EA9BFA9FC0677BE297F5330
+:10931000CE4853FD499E31A6FC8F46DC60AA3FC56E
+:109320003BC5949F3661B6A9FE8CE21253F9CC5925
+:109330008B4CE5B3B5DB4CF95B2BEE34D5FFF192EA
+:10934000E5A672AF7059710E36431F23B8EF853E04
+:1093500046E9ED6F674606E375D4384B97EF0C3559
+:109360000D90FA5674AEF739D025EE09810EFBE860
+:10937000F780F6E29C1906BF654091FA704B32E81F
+:1093800026B45E68F9A888FD97F09465FFE76E9FA4
+:1093900061253E31EAAAFD4332287FFBC0E619561B
+:1093A000E22FA3AED9FF523AE57FF1DC37B27CF071
+:1093B000FE4B285772F7CBFC34C122C8AF06CE9BB8
+:1093C000E1A3758CBA2E7D8D47DA53BA8C53355292
+:1093D000C001719D8003D200D127D2FD449F485F18
+:1093E00027FA2CB7097190E813E921D24BF1FDF768
+:1093F000A497223D4C7A29D277482F45DA427A2920
+:10940000D23FD4CDE2F4833A8DDBFDB1AE82D38F6F
+:10941000EA96F0F74FEA9671FA973A1F7FFF648059
+:10942000617F08B09DC6F08BD5C01F097BDE2EDBA7
+:10943000B960BFB1E295E7ABE1C7AC5F225A23B098
+:109440004F5BADB1271C9DFEC9EEF9AD559C08924E
+:10945000CB9CE1DECF06F0F8BD5DCCB7F5EF47C49D
+:10946000B43E0584A74FD3B5B3E007330ACA56C646
+:1094700010FFB8EEEB2536D0CB8796AEEFA3EFD535
+:10948000F9DBA703BD6DE8F75AFD5DA66B1D32AE93
+:10949000F05A6B6B3DDBDBBF146EC403ED33ECEFB6
+:1094A000F758F95EB1F285E0FCE804C1F9FA2F5BE8
+:1094B000380EF15A972789CF1D3D6FC40575F8FD09
+:1094C000F11314EF63F8E18D789FC22F5AC7413E24
+:1094D000181D69778785C40DC0DFBE2FEA8FC6BC13
+:1094E000F87D27C3BFFFD4972280F7F20C3FFEB56B
+:1094F0008E9634D81546DFE1F004C73319FE7AE5BD
+:109500008B1615E78911AF648C63CC3BCA4AFD15F5
+:1095100074C6235DEB6ACA475C467D7524F7D79312
+:10952000BEE3DD49AAE755B95D533EECC7A3AB22C4
+:109530003D42E98C13E8A9AF9BEAF13A0BBFD03862
+:109540004E62B41E27817E1CB29CDF011C9D104818
+:10955000C6FB9FA397D83DB0833E8EB8B382CEB8EA
+:1095600005D48F08DAC79827FAEDF715CD17F2BCA6
+:10957000D7CBF09DE692F429DC7A5E3FAF85632C71
+:10958000DBBB543D5F1CE6FA6B04D1CFAD19DA901A
+:1095900081D4DF1F948CCC7CD617327A60DF4F09E0
+:1095A0007947B00BFA1931F0FF847EBC12EFBD058C
+:1095B000DBE142E9C8C08F414F06DEBBA32B830E1F
+:1095C00082E2D018EF1D71657A7FA1F4D61D9D1936
+:1095D000F475AD43D201F08CF82083AE942F9AF845
+:1095E0001EEBE82A079F7F065D85D2C5957425E9A5
+:1095F000B4FE270EEEEF4ABAEAA407C0E587D355BA
+:109600008B8AF3F89FA5A7796D623CEEFF975C7695
+:109610001F44DAAB9FB6177CA64C8C190F12132E81
+:109620007510EC62A1F532BAA9174A7FA1ED6EBCA4
+:10963000A25D466E70BB71FA5919DAAE12ED7A046A
+:10964000B71BC271116FE9F708DE721A712D9E996E
+:1096500090530EB96DF22D2FE18DCC27BA19A7F3D7
+:10966000F34362099FBF24EEFA404F853A698DCBE0
+:109670005DC8FA426164D7710537EAEDC77F5DDCEA
+:1096800080F98C4F30CBE337EAF2FCF5A291FB0F67
+:109690007D47E1C6DCEB59CE0F7D4761F3403DFECF
+:1096A000204DA481DF170A8F9C9FFE0E46A1BECFDE
+:1096B0005374BAC970AB62541CEE9B6A561C32AF2D
+:1096C000E31D8C3C8CEBE3FC0DC2CFE94D22C0FDC9
+:1096D0004CA20309F91F096193EF5FC8FBBA35AAD1
+:1096E000F6DF90578D7BBA4F3BB557B0CF0F444C48
+:1096F0009E83774AC60D19D70FEDF617BA59CEDB00
+:10970000EFC860B913FBD216D7C927DEA473BA5FBE
+:10971000A6BC378A14F746FBD179FA3B3AC791BF0A
+:109720003167B940BBF16E73BC93D1FE26D7386167
+:109730008DEFFE9CBC296F776FD8CDDE8ACD2E04CD
+:109740007EDF8ABDAA10EB7D2BB6A745A661764EBB
+:1097500007BDD2AF2BB9D8A0FBCEF1C6F378DDC1DF
+:10976000D9806B283C0D38FF00B81EEB0AAE7B0792
+:10977000089637AA23245FAD8E907CD580737558E8
+:10978000C77DDE9EC1F127550E09AFF9CBAE11564C
+:1097900012F5172C1BC9F99375C207B89FC69260C2
+:1097A000100FB1F709EB58CE1BEFDC9D7DF8BDE83B
+:1097B000249AE72A87F63F98DFB98240164984E267
+:1097C000E4867ABE8F7FFE05D5037DAA4A75AFF188
+:1097D000C0CEFA962AEF717D7D2015FE58F154D740
+:1097E000F1E8550E095F439F1CD2AF98F7ADB15F0A
+:1097F00085FEBE80215FF50E93F1DCC63DF7EEE4F9
+:10980000ADE1E192AFF50E93FCD8C0EB06BB7EEE66
+:10981000533FC3898FA6FC3A9CF5AB98586F4C2EEA
+:10982000EC8385C2A49F187695F604F97ECAB5220A
+:10983000EB9151942F3C64137E2A6F074340799239
+:10984000F4B3B61FBAA482EF174529FC3E86716FA8
+:10985000292CC922DC417CC2E90E37BD4B1B911378
+:1098600067CA47797A99EAC78C483795C77A0798C3
+:10987000CAE3271498F23D8AAF36D5EF396BAC298D
+:109880009FACDD68AA9F5231D59437F8588AFC24E2
+:10989000FA2CB9C5D4BEEFB25253FD345FA5A95C12
+:1098A000C53B9B3140ABB7252711CF81CA9F8CD5D3
+:1098B0004B43DEE3B508CBF0CE776BFE335ADECBFD
+:1098C0009910B980DFAFC96CFC99799EEA446B2C82
+:1098D000A5D7BBCD7CB128C99C1F17B94F81DF71BB
+:1098E0009CCBCC9F5396584DF91FE5EAFC344FE4CE
+:1098F000B1DDE3BBF0AF0D30E13F144E440FFC7E11
+:10990000683B9DEF3ECCEBCD327E0F077E93E0753A
+:10991000C06F120C07F84D82F3F09B04D787DF2449
+:10992000B81C7E93E0F22187CCF81FD662C6FF55A3
+:109930001F99F16FD06577781AD96AA60FA1299A75
+:10994000F22D78BAE694997E42F1731D895BB109D4
+:10995000C087E209B87F38BE5686E08BF0C3F73780
+:10996000DB7B47317E1ED7D7756D6020DF972E3A9F
+:10997000A40ABC6F63ACF371FDDC3F6DD51A73892B
+:10998000CFFCCE5D90043E769D907EDBF155164F68
+:1099900080BA7F20649CD929DA43A83F2BFE52AAC3
+:1099A0001D74D226DFCF7B0E7C79D895F1B23E12A2
+:1099B0004FF8BEF6CF54BE2775C4D2A8808FAF8EA5
+:1099C000D19E009F9997BB84D79B248AB72F405C78
+:1099D000D47F85A5223FB7AFBCC72D725BF9FE8946
+:1099E000C127E7A6C8B8A92DB9BA7FDD23E3A79E92
+:1099F000C995727794C7C571DE25B9F27E0DA98B22
+:109A0000A97307013E879DD980CF3A0BBFEBD98A56
+:109A10007BE4099DF7C8210F43FEECA3CB7FF51F24
+:109A20003B1C5847F67A613A7FFBFB1DA6F8E281A2
+:109A30005B5DA6FCA0A62453FDC1BBDCA6F2FC40E6
+:109A40008EA97CC8218F293FAC6584A9FE551F795A
+:109A50004DF991AD134CF5AF39556CCAA788B6478F
+:109A600001DFBE8AB4531CCD4D97FAB95B70DCE4BC
+:109A7000DCBB63E57D5FDD7E61C8FB46DCB9A6D358
+:109A800075A81ED1D72EE5E8FA6421F54687AE1FEA
+:109A90000AB33EA1E971E31DF7587CE6B871235E75
+:109AA000BC43EFD0F58A8E7B349DF1E2DEE078F1A5
+:109AB000B9615DBF1F7D5EC77BE8FCFBDAE57AEB31
+:109AC000EFB4F3BD1D635EA1F349C99674BBD9D150
+:109AD000F5BDAABFE54AFB466B66F125D0FD1336FE
+:109AE0004F2BFF6D842BC6F3B4225EB7FE1776CFE3
+:109AF0000AF7778F3777B05CCF1C8B65DE945C8E6E
+:109B00008B33FDDD84884192BEAD8375FB4AC878F6
+:109B1000736364DC9A88B1BB41BFDD8F27E1996430
+:109B2000170D7CFF4BBF67F1E3354DF7A1688EBD84
+:109B3000517F3FCE6F033D4C1C4BF2593EC9135B26
+:109B40007A3D144972CA13CBAC6C9F8A7BFE57379F
+:109B5000FBFA75DE9FE94BFA10E803B20EF4A80792
+:109B6000F25429B70C92EB2B52BFEEB8E7C07E1827
+:109B700021F4F34370BC4F17F4C67468ACE3DF758F
+:109B8000EFC1A0DB503819FAAFD0E33BFB19F3D299
+:109B9000E167EC07037EC6FD13F76DB6E24D917CDD
+:109BA0008F6502E2E50CFC6DC993F6C6053A3C50A0
+:109BB0000FFCA8BB7A456A6E0CECF7EDC21DE3EA18
+:109BC000820E3BEAFF9BE062C0BFBBFB6DDDF1870D
+:109BD00050BEF05DF7DDBAA3D37FF6DE5B109F9039
+:109BE000F14B3A5EFCFD2C1C17707794793F3F32A5
+:109BF00048F2899183F4FDE423FDD6CC2F04FC0FB9
+:109C0000F52B559D5FC8F3BC24AD98DFAFC6F98A2C
+:109C1000FB5BF3374AF94788E2C4AB87C28F6FE337
+:109C2000FBCBD77A05DB6D4A1B153FDEF92AF175B0
+:109C3000AD0FB39FCFCD7207BF3BC8264D6A5746C5
+:109C4000EDF6A55DF9CEFAC248F9EE60E8FBEA0B45
+:109C500075BD192F6A60DF86FABDEE19A4FBB13C11
+:109C6000C2C3F29C1ED750A1D7E9A037BF7C6F0EAC
+:109C70007A32F631A51C1F67C0CD0D3FD490CE3C83
+:109C8000C1373C07E77983B5CBF8C50EF81A7EAB30
+:109C90000EBFEC61BE27111A8F71CE7720BA2B3F11
+:109CA00098E11FEB6E1F74F8C7BEC3EFD61E69891B
+:109CB000C6DFF169DF26DF67E9F45BFD65B8CB221B
+:109CC000FD5331F03FB5EAFD898D795DDD0FD59605
+:109CD000EFE43894668BB67310ADEF2CF58F777B7D
+:109CE000EF89DC9F88771126EA76A92BD7ADCBCDFB
+:109CF000A314E98FF6A98CEFF609F25E3DF15181CC
+:109D00007D67C44F4C118104A4861F4A5B3D92E1DC
+:109D10006FF8A14A0223799E33EA17DAF0E468EB80
+:109D2000A3771585BB3BFD53AD7D645C54777EAA5C
+:109D30006997F3B9BFE997AFE17E3E189426E5B67F
+:109D400086FB6E039D0DD82A6C5867ABADEBBF4BFD
+:109D500051A8F3AB12E89A3D82E2AD962BBC2F9648
+:109D60002AC288BF623E6FE42F35EAF92299BF7D8F
+:109D7000A5CCB7EAEFA76DD1ED20582752AC077AF2
+:109D8000F936DD4E827520C53AF01D7C0D79F0352F
+:109D9000E4C1D790075F430ABE86EFA5A2381576C7
+:109DA0005BF8D30A83F607FC6985417213FC69C12D
+:109DB00079F8D382EBC39F165C0E7F5A7039FC6929
+:109DC000C179F8D382EBC39F169C873F2DB83EFC28
+:109DD00069C179F8D382EBC39F165C0E7F5A703944
+:109DE000FC69C179F8D382EBC39F165C3E6F996220
+:109DF000F2B7CDD3DF7F285B1FCFF45198511C9B66
+:109E000047F8FDEF887FFCC4960E3C372F02DD2E0D
+:109E1000AD0EF7483C374E9078B70889E7B6D98C35
+:109E2000E7BBEC325F24E3B443E9077EAB429BF42B
+:109E30005B2185DF0A29FC5648E1B72ACC947E2BAA
+:109E4000A4F05BE13BFC5648E1B7420ABF1552F86B
+:109E5000AD90C26F85147E2BB483DF0A29FC56F8BF
+:109E60000EBF1552F8ADF0FD08CD03FE2B635E90DA
+:109E7000F3FB99F452A243935EEA32E521E707D758
+:109E8000879C1F5C0E393FB81C727E701E727E70FC
+:109E90007DC8F9C1F94983DCBCBF20EF07B783BC9B
+:109EA0001F9C1FD4E87B03B6AB491B2EBC8EB43578
+:109EB0004A7942710931352F7326FC8BAD4E253519
+:109EC000D623846DF980998594D7F438C73CD16640
+:109ED00001BE39AE80F0A60504C7650FFA7FC95CE4
+:109EE0006EF8B3F987F09EBF43B0DE50A3DFAF3505
+:109EF000DA7B844B456AD4EFCC775D2F747CA31E4C
+:109F0000F3CBA0799062998F7893FCBB220B70AF52
+:109F1000608B4591F1B82B643C74285DADCA93E722
+:109F2000FB16CBF6FDE1885329513CB8EF9165153E
+:109F3000876C0580D392027EF72A2F565FD792ABAB
+:109F4000118765CCDBB04B129FE07B86A3DA84BD22
+:109F50009CC619FD85B0E3EF734CB44B7902EDA0BC
+:109F60006F0EF429DE4D41F4BD2C4F9E7B9AEFB667
+:109F7000ABCBE9FBC06D4BAEC6FDC589E1B2DDD30D
+:109F8000BF8966384E6E50F89ECEA86DC28BFBC955
+:109F9000CB757E3A709BCB5ECEE3BAF8DEA3D16F71
+:109FA000C98654BEA759225A0B710F450C55F83D6E
+:109FB0007C036EB4BED7B1BE2CDA2AB02FFFE0FB13
+:109FC0004F242E7E9FFB4FA387C61621AE5034CB65
+:109FD000F742270D2D59D983E6A5F9E57BA1A3BF4B
+:109FE00058F206E79F92EF8532F90CE7F9F179987C
+:109FF000ED53F8FD95C9BE8D960437EE652FB72554
+:10A00000A2FE36E1815805F508F78A8D75E58A16B6
+:10A010008B5301BD8803F141F4479C633AE825DF87
+:10A0200063E3F759A6585D36F01B43CE2971C9B1D9
+:10A030008BD451317CCF32444EB8D4D083E3627E8E
+:10A04000789C4E3BDFE75FBAD3C97285B65E61BECE
+:10A05000793E5FC6BB56DDF6E1704B7A679CCE99C0
+:10A0600034FF16BC037B267D7BF40885E588BD792B
+:10A0700004D7A30D2FF13DCD92956FF03D944B0D7C
+:10A080000F45CBFB6CD2FF52AEC3CDB03BCDD7F169
+:10A0900053AEC7691DAB93EF3AD339CCEFAE5C6AD0
+:10A0A000B0B19C112A2F1AF2A7F11E9110AE3FC237
+:10A0B000CE53D160E33BC00BD794AC4A1257CA9140
+:10A0C0008B75397351838DE3B22AF4F7D442FF6E56
+:10A0D000CF623D1E6BF156F3F74FF242E450E37D41
+:10A0E0004DBD4EC9DB0766B03CB4C4C6FECD39CB0E
+:10A0F000A57C24B60B3FEE93CC593ECE82F766E6A4
+:10A10000ECF47A942EE8E95D5D4E9AD8EA64F84F53
+:10A11000B91CC1FC65EAE514CEDF7C3999D3999767
+:10A1200065DC2AEE22816E5A8BE43B07EFEBF2D11D
+:10A130000CC4B1C6433EEBC9F4DD4EF48D21F2747C
+:10A14000BE35C0AB1C807838D1A6AD449CECC48D24
+:10A1500082EF834D821C45FDCF825C158FFD9156A9
+:10A16000C4F76126287CBF68D2D0DBF4FD40FB43F6
+:10A17000303FE1F757B4C2297EC439CDD2B65B80F7
+:10A180007F635F68BEA3FC5EEA249F62C73B929A2E
+:10A19000AE6F1B741FBA3FE646E876B2486907EB1C
+:10A1A000B09361B27824C9B76A26E4D3B9B06DF62A
+:10A1B000D20981601F952BCB7BFC76D5CC069241D2
+:10A1C000FF55FBC91C8B45DE3F233990EF0B88966A
+:10A1D000A29E942F59A314403F32E6F5B967EC389C
+:10A1E000CFB04E3A28EDD8A7F21EE5D27B324D7E95
+:10A1F0009BD0B48CE08DFD3437A6F5270A6168F456
+:10A2000060E12D1C81F7EB85F1285400F198B7E847
+:10A21000F9EAC13BFFB43A97E1C4F991BF7D68A662
+:10A220002FF25FE09373146BF0DF1B4BB268570D96
+:10A23000EEC1F750C703BF11B96DFC9E444AB64B3F
+:10A24000F2A9107B4BF56089C750BB4B59AE3C77E8
+:10A2500084D59D7A2BFB7BDC6CB734D67DCC66BE77
+:10A26000E76BA4F307EBE75EDDBFE79ECAC316F911
+:10A27000FEC26316FFF657885E2FF7D06660BD8F6B
+:10A2800021DE9EE7AFF1FA8CF74C3AF895FE6E8925
+:10A29000414F47965DE2FB2AA59176B71A444FE5F8
+:10A2A000AB15BE0F5ABA4CDEE7D6562BF25D846E64
+:10A2B000EC58BF99FDBFFC9ED56F7E112E0B75F833
+:10A2C000CEB1B7BCE148EB84EF9F973D60937C34FF
+:10A2D0009089FB0EB72C71F2BBD99F7B8AAB060F1E
+:10A2E000039E3C8CA771D8E5547F4B8CB604DF4BA2
+:10A2F00045CB41D81DE7FEFC6D7E8FBAB6398DDFA8
+:10A30000BF2CD995BF0AEFD97CEED17E82F5974458
+:10A31000BAEC90476A1A62F97C9EDB53BFCF2BDA06
+:10A32000D8CF67E0E7BEC1D28E777DBE1CE7A2AE74
+:10A330005711C06C534CF5BAB6631AF6D1503B4B6B
+:10A34000E8BB21DF655781DDC41E645F35EC32B6A2
+:10A350009C63B371AECFB177FDF73EF7EAF337F404
+:10A36000DAF91D7A6DEEF89E90FFD72A2ED8D3CB5E
+:10A3700023DD3371BFA1FC900D91B462629C5BBE82
+:10A380001F738F7C3FA6F48E7CE66773809302DC9C
+:10A390003B19C9FBB8DC4FE990EEF7FBAD6B0FF44E
+:10A3A000D90D7A0A78F91D827297D71E17241F9546
+:10A3B000352AA677248CFC0B8355C99748DD00FC11
+:10A3C0007E7C479A1D6F39CD213109F1997B412758
+:10A3D000C33ADB513D8E3F99982E0ECAF7BD14FE4D
+:10A3E000BBE4182FF8EF5B95369ADFC3A0FA2CDF99
+:10A3F000ED1A1CC5FD95B868DD69485D3C4F8203C8
+:10A40000C3A9ED3EEACFCDE3303ECA027E1BEC0786
+:10A410007310F742F95B5C7E1BC6296D90EFD46820
+:10A420006BE438DAEA58FB20C8075697BD4FB05C9A
+:10A43000D820DFBD9EA3FFDD119A2FCBCDE50427E9
+:10A44000DCB333EEDD86C2AB449F7F7963AC59CE7B
+:10A450006C5C6B037E6677F35EC639DD0E5DDA30C9
+:10A4600086DF3728B77AF9BE8AA6C3FBB3DB9CF731
+:10A47000C25F327BDD23B634CAFF65B0946BCFE98F
+:10A48000FB71627A2093DFA9BACDC9F1E3B35D8D88
+:10A49000BCDE0E783F44F081DCE22A6678139DF83A
+:10A4A000106F59BECE8CDFCEF944C977FCD795F03A
+:10A4B000FE5B60D5ECAEE079ACDF9789F8A1D9B44A
+:10A4C000EFF10E9770697C1FF6C44333F9EF056214
+:10A4D0009E1CCFE6718FC7BB5344374CD706FD187F
+:10A4E000F7F38DF1AC1EABB4C77BBE6B9F7A0F4206
+:10A4F0004EAF277CC30FD0DD3EB5E302268D6B2F18
+:10A5000097EF075EC1EFF4FDFAFF016A916CD3008B
+:10A51000800000001F8B08000000000000FFED7DA0
+:10A520007B5C5565BAF0BBD6DA57D8C0668BB051A4
+:10A53000C00D0262116D10101575A1805B736A6306
+:10A540003729C48DB7500191ACA89FF3B10D6FA905
+:10A5500095262A9675B6A68D957570B2461B9BD921
+:10A560006A9A5D0F3A8DD33953B6CD32BB09D234D6
+:10A570009F7DD399BEE779DEB560AF0DA475A6F9CE
+:10A58000CEEFFC3EFCE3F57DD77B7DEECFF35E7630
+:10A5900022634CB23136789883B1818C1918934577
+:10A5A000C83FA177FBED02639571ACBE2D13D22895
+:10A5B00056FF6B0B63DFE3DFF89E74A253642C8FAE
+:10A5C000B1DBA05D1B7CAF10D9ABCCD6F33DD3295A
+:10A5D000D0F78A1436D31DD41EFBC37EE3D5EF1308
+:10A5E000FC698B337BEAABE356D878BBA9D07E9A63
+:10A5F00005EB8BDDF51BA83ECFB3E92691C53236BE
+:10A60000DB04FF87A594487B56C4E632D6B057706A
+:10A610001AA1A8E14189B118489F8BF0B164C6BE68
+:10A6200068F8CD3BB740BDCF376FAF64437BE635AD
+:10A63000C73F8A39463036F75236730C606CDEA558
+:10A640003194560FF364380706D5DBF85CBA07C6B9
+:10A65000BFAD2DFBDC7F305AB79FE530F6FE73BFF0
+:10A66000FDE368E897319FDE7D4DCF3A66AD3EA1B0
+:10A67000AFB204C38DAF734D4657158379CEB6186C
+:10A680001C1214CD5E5EC5649827B333671AE413B9
+:10A6900075CC2B42BF6CFD16D904EBF330FE57B5D9
+:10A6A0005C90A95D63BE4F82F50C867AC61C5EDFA6
+:10A6B0000CF0F7580C678448A8E82D910319BCCD1D
+:10A6C000F7293DF81D0CA921A707EF890A1DCC5ECB
+:10A6D00057066D7BF0050333960FEB651CAEEAFC65
+:10A6E000A72AF3BF6DBD20FBA0DE0D4E07CF572775
+:10A6F0001BE6C17AE7AC4F36CC86B45CF95E3E47C8
+:10A700005BDE8D2FAB8AAFCC9576584F571BC75762
+:10A71000D73A3DE1AB6B4F2F7C2531A9671E7700FF
+:10A72000BED8008E2F3682E30B53C057A5332FA817
+:10A73000DEBF707CCD7EFEED0F5E76D0FAA8FFCE38
+:10A74000078DBE1DD0FFACB6BD84B7F2D51BF4C9D2
+:10A7500050AFCE994C7051DBCFAECFB63280E76DA3
+:10A76000ABB7EB1D16FCEEE893EE219559103F4177
+:10A770009E099067BA40BC3BA2A77E39A47B619C2E
+:10A78000258BCD91ECDA9E71B628F43CBB3EDA867F
+:10A79000E3CDAEAF7A886571FA7767F6E6BFB36648
+:10A7A000CE17B3A03FE4CFB345CE24E48B0A51D4F7
+:10A7B000F09B9A3E847883793D06E03523FEC3DB27
+:10A7C0009E46380C5E14E66C864FA9A9011F8E8B3D
+:10A7D000F48CF33688CC6B827AA935818B388F5410
+:10A7E000A0286C8769848D52160BF91D30ED024844
+:10A7F00053249EEE73F2F5C3773F7E6731813C5C54
+:10A80000BF4ACFA1F46A603B57A700FE0D31CCD9F7
+:10A81000ECE8A14FB51F953E55FAED6F7D7BAE700C
+:10A820007D6793393C598633C904E3563E3CCCB925
+:10A8300046B8FC3A0D61000F5BD07A81580B6C7DF5
+:10A84000AC3735905776CD0FADB7A524B68FF586CA
+:10A85000AE53E5933926CEC3C02751019877D7FA76
+:10A86000A1510CF12D302FCA9DB38BCD22CE5B5D53
+:10A87000D7534D5019E6B6BBC944E9334DC068C340
+:10A88000003E4D76CA3FDFE4A0B4AD2983CADB9D0C
+:10A89000369A3F6381886980A78A3085FFFD3C8FA7
+:10A8A000E56541E5536D9CEE4E5B0311B62039FD25
+:10A8B00071BD790D8B42FA0E3C88FCCC1A87B25DD3
+:10A8C00030D4E9F56723C44CA44F3E3FB5DD127D7B
+:10A8D00027C93F166170EC02969BB124FB7423E0FC
+:10A8E0006BEEF2382790129BD13894E4C20C6FB40F
+:10A8F0009300B07E0B4378CC53E460F892AA952382
+:10A90000B17E6BB2558071E65A9CE75AA9FDD5CE4F
+:10A91000FBF17B4B99212593AACA26906377287275
+:10A920006C89C0DCC88777A09C44FE120FA5A2FEEC
+:10A93000B9A355F01B29CF560B00D721CDEED27805
+:10A9400094135B05E70E6CBB0DE4A9A9479E760D39
+:10A95000737F817A817D07F407FD5F252002715D99
+:10A960006D721CCAF14D827517C379B90D089F0528
+:10A970000A9D9C6E3913E1C8EC81EBA3F85F10656A
+:10A98000CC238B286F1B143D86644079454E0E31D5
+:10A9900070F841CADA113F3AA709E9A0CB9212C573
+:10A9A000FA286F884889C3F239AD12C945959EAA25
+:10A9B000D535287C3317BEA3DE2B912A6291BE5673
+:10A9C000B64CA474CE8692CD5EA0E324C11D3B9A02
+:10A9D000D6A367B89E39B513AF47BC55EF30469B39
+:10A9E000006F497A6F524E103FCED9BE2A8941BBC3
+:10A9F000F3DBCDD351FE175BCB8AA3A1FDBC6DD198
+:10AA0000D952901E49CAE67A6441EDC43806F0ACCA
+:10AA1000F9FB9127ACA08FE7429F56E8FF9BB670E9
+:10AA20009F17AAD434ED4F9280E7DE3179E2B3A1CB
+:10AA3000FE42F1E02DA3501F08BEA7E2A9BE23CE1F
+:10AA4000DA873C50D373C00F0EA0F7DAFFF51EF57E
+:10AA5000F395F8D6F5E5D0BEA6F68548EC67E1A6F5
+:10AA60003FE45BA1FCA0E849C3FE3F17B63F654544
+:10AA7000026CDD9E857A7CEEA6B4284F1FF217F992
+:10AA800000F151BD5F20F8AAE5337C510684BBC7B5
+:10AA9000CF0C564CADCC80F47E5E628D680FA8F66C
+:10AAA0008C5A3E329BCBADF351EB93904EE63FB5C3
+:10AAB0002509F5CC67113C5FF1D4AD6FA0DCF2EC59
+:10AAC000341A10AF1E1D3338519F7941BF221D55D6
+:10AAD00003FFC693DD61AE047A2ACA0E27B8CE6F93
+:10AAE0001D41FA519D177CA7F2CF74CC85F318D283
+:10AAF000DC998D74FF679D7F2EE2F3CFF566A71773
+:10AB0000F199CDF5DB9FD74BA558EE0586417BE447
+:10AB1000CFEB5F8848B5F4D86F25D2FBB28476D6E8
+:10AB20008B4236EAEDF0CC76C32CB21B18D1599D7E
+:10AB300095D359C3017DE9E018B2C7A8A446E73709
+:10AB4000F485AF058ABDD59DDFB7D7807C52B3872A
+:10AB5000DB11356D67C88E50ED925A859F17EE391F
+:10AB6000437685DAAE6E1F874BED3E5E5E9501C87B
+:10AB70001DCDE5800042BA0AF105F9FBFEF5D7D3F9
+:10AB80009769F27B297FDFB5562E0F759D49A8B7CF
+:10AB9000D6649C3420FE6B972BFD425E1F34DEBCD6
+:10ABA000EC81042F2C1F6AC1F60E8DFD50BB2F9A2D
+:10ABB000DAFB6BC356A3BE97EB2C3A4C9B6B2DA4D0
+:10ABC000FFB7D58B19BA5C9C5C9813EDB983619182
+:10ABD000592847072E3C650648026A3B8F8850BEBD
+:10ABE0003ACA732FD2671C03AE90506FF805B45F5A
+:10ABF0003B5EF97404F63F6E48E06B0653D70BBF1B
+:10AC00009B5E0CF26419982D641F670646201D0F89
+:10AC10003CCCE5F4E37AB61AF51BD3B9D93428F75E
+:10AC2000A3DC423C7F1BE6DB05FFFF1DF30FC6FEE6
+:10AC300099C93F14DBBDA4D0A7DB68592DC0BCAEB9
+:10AC40001EEA59834BBE41D05F932D220EA434AC33
+:10AC5000D7A1E7DF557B758222A713C18E40BBC801
+:10AC600030C86E413A6E36F3F509B2CC1A611EF760
+:10AC7000671E9E8D7A7A6DA78919619D133AC3C8A4
+:10AC80007E4D1CE422BDD66C4E22BD2D3874AC0224
+:10AC9000EA1FCE14FD3AACCF4C3EACCF4C2176AE81
+:10ACA0006896B19D70F0B56F51BE0F962E1E8982C9
+:10ACB000F50DBE477036439DCAAE738FFF1BA415BA
+:10ACC0009776ECFD5748FF2DCAB313E17ABACB75DE
+:10ACD000C603A85B6B6D3339B9DE60C1EB3878EF22
+:10ACE000B79136B1677E1D9DE79EFB4D2EA62627A8
+:10ACF000EA9F090725D21FA1F3E9B0C3C487523DDB
+:10AD0000B23B3B2CA24F10B0FE91F7707E134C1655
+:10AD1000BF84F6BA49FF65B07E618EC4E87357936D
+:10AD20004A61DF8391108B93477D74D14276EB3873
+:10AD3000850F553A7B2B9BDB8F6F297255853373BB
+:10AD4000C82C58AFA8F06CD6ABFA2210CE327BF8E4
+:10AD5000769152AFEB9228931D5E6DF431E8B2EB21
+:10AD6000E050D233FDC9D93FA0DD01F6C4F254F959
+:10AD70005D842753F4EECD0AFC54FD2D29FDDFAC94
+:10AD8000C0F1668BC8E1765308DC147A0AA5971ED9
+:10AD90007A8841DBA31BCFECBEF6A351C984DF6BDD
+:10ADA0001EE678FD90F0FAED5B2B80CDD8A0BF4D6C
+:10ADB00021FCFE0C78F58BB93F02AFEDA178F59B35
+:10ADC00087215E37896467A01D8876A307E5C0B533
+:10ADD00094E7F66006233951298539D724E3778033
+:10ADE0004316C987A3281F54B930C415B806F5E91E
+:10ADF0006970E5717E01B18D97E7A4105D24B0F60E
+:10AE0000782C07BCE7A17D279986667E0C72B7E592
+:10AE100001DFDEDF403FCD826FEB3C988FF7668B22
+:10AE200013EDB70E9FE8D5C33C5AA259D67E18BF82
+:10AE300065FE554E2F9633456E4C37F8D07E83EF26
+:10AE4000498DF8BD9C7F7FE9EF671F44FBAC338DD4
+:10AE5000D1BA5AB2593ADA672D6519F4FDB7AADCAE
+:10AE6000793082B72FE3F4DD32DFE6433DF4E8A327
+:10AE7000BEE1A8275AB6CBF136480D519EF81C9872
+:10AE8000FF2089D37D4B329443BA597097CFC57E4A
+:10AE9000AEE1F30D94873DFF1474654E05D106E5D0
+:10AEA000A71B2376A05C55E974F0302EDF8778CF9E
+:10AEB0006C45387927B08C7AE8FF4385DE54F80B6F
+:10AEC000C0368D00F798103CA87417A3C05F58CA0D
+:10AED000E9CF3B41594F1DF3A1BF910053090738FA
+:10AEE000571AC1F0837496D5938DF36F5E0CF89169
+:10AEF000701D1C0FA74556DDD6075F15E628F10D1E
+:10AF00001802F9A69271BEA944BA427A6C04BA0A30
+:10AF1000A2471648883E17AED015CA8308F7B81C5A
+:10AF200058E757C21FF2B1F0ADFF94A6F735CEA493
+:10AF30001C2E2F1E337B4A7348EF4DD0D89D6F6572
+:10AF40007F9A88FAE5F4BDAF25609A14E59E8CEBF4
+:10AF5000D85CFED75214FF1FC607F4B88E0FCBFF84
+:10AF60004F22DA2D954B5F23FABFD2799699983705
+:10AF70001CE01E5D2C38FD00BF792D46E724F81635
+:10AF8000575C750CE159D66A74189156D8628D1CBD
+:10AF90003B2B8F40378A1DDA6A24BA39F74B89F484
+:10AFA000C1B9928BAF0E800FE756084EAC57D63220
+:10AFB0006C2590372B2916A85E9957A07A65A91C95
+:10AFC0005F271A05A23740AF253B28DE31A7F58E53
+:10AFD000A988DF13C55F0FA4F8C17A1847E5632E6F
+:10AFE000DE489E9529F5AB561B9147BBBF97B5AC84
+:10AFF000BA88FC3FD31B52DE3AE953ECB7AC515B45
+:10B00000EEC635821D77574E440CCA07E664CEEF74
+:10B010001148F240F20FFA93BB407144CF300FC297
+:10B02000C389BC617AA4EB990857A0DBE8A57CDD55
+:10B0300033A70ABE49B0CE9916CE671F9609BEFB4C
+:10B04000053EFF0940EF65501E0B745D16C3E438E2
+:10B0500048DD26E60FC7792E1DF609CADBD338D4A2
+:10B0600028AAEF8FB4A15CF7E81189B7322FA5E5C4
+:10B07000CC47E9EDCC4FF398C13A937490AF93FC71
+:10B080002B318EF32BB36703D2D75F8B4E9C16E028
+:10B09000FBDD3942DE2894438D0368DD975B1F702A
+:10B0A000A5807606AA41AC5F96E37E14FBB3CA4C3A
+:10B0B0008F71AB74958E5A993715D617BBDEE29B0C
+:10B0C00004EB8B6BF51CC2F5A64F373810EF8313DA
+:10B0D000F83A1374DC9F3F546E60A3810E363F181C
+:10B0E000E6433ADBBC3520DAA1FEE6038001CC97CB
+:10B0F000AF14BCF0DDEA614E8CD359751E11EDFE24
+:10B10000A2568F1808E2A7E1B241443991BED32379
+:10B11000A29EB45AD7533D355FACD44F3779065908
+:10B12000C94E9E4EF4335CA11FB59FD456835F0475
+:10B13000B817C94A7D99B757FB618A9E56DB6139BA
+:10B14000D2677AABA34F3F454D5B503F838FF808E2
+:10B15000C605D27BCA1F71FDDA84F01B78F3AB36CB
+:10B160004C370321F8711C9DC74CE379F83CD3158B
+:10B17000DA87BFBF7F8FE3631EF0BBB9F5FE22E421
+:10B18000A3CD001FC4F3E69DB3CCD4CFF4599A7974
+:10B1900031A986F22508074BEF753CA2CC2F3DD58F
+:10B1A000235A69BDCE4368E7A5CB8CE2016A3F769E
+:10B1B0001D7405F46A777A857ACCCB905A94B84797
+:10B1C0003A8EB34E40FF315DC157496BFD6133F696
+:10B1D000E366145F4CCF85FEA1FE268483A137FC75
+:10B1E00042E7995ECCE77342A9DF8EF194746CE775
+:10B1F00058114374C5E7D7D5EA14621C97B18FA0E4
+:10B20000FDC9907E9EC2B80CA4CF4E7E6D4A2EB46E
+:10B210007FFED19776B4D0520E3EB30FE556ABF514
+:10B22000E69B709C83229FFF4D72E25D98DF6D204C
+:10B230003D9ABE534EDB44799313FDEBAE56DF557A
+:10B240002F42BD2C18C664EB3D8F130A9CDA153AC9
+:10B25000383979CB205CEF5345772C5802ED875F66
+:10B26000F7388D3B7CCAFC9416C80F9BF8CBAB30EB
+:10B270007F5F8EC73C02E4FEB0D25FDEB60FE56AA8
+:10B28000E9FC1C8297C57645F2A939DAE3F502BFDD
+:10B290003747DC528EFCB8D26670482477EB19FA37
+:10B2A00059CD1177DBB1BFE5D1F9264C0DD6BF36AC
+:10B2B000A19C3C6EC931211E9A2D131896EBAC0A45
+:10B2C0009EBE1B4FFA40528872778473BA4C74E565
+:10B2D0006428270C0906ADBCD671792FD91D3EB460
+:10B2E0009FBAACF54881CC600954A07C935479692D
+:10B2F000717A713CC9E2B4A3BFB44291372C86AFD6
+:10B30000D36039F79F38AF5EFD632E96504B7F8632
+:10B31000B0CC2841F93FDA9BC6103E575383C5BBDA
+:10B3200018F544687F5D2070508EA34F4776337EBA
+:10B3300048EEDD5EB21B347AA45B5E7AA2F521F2A0
+:10B34000521E817AA2582079E961EB0CB8FE120CEA
+:10B35000B2005C3CDBB85E54F97B26CE05F0E549D3
+:10B3600065915C5EE9E473260EC6EFD1AE5C2A45BA
+:10B37000221E025EC9E0E9C39FF778937F501E9DAD
+:10B3800041FA87A90790FE21FD44E10F8F8A076FDC
+:10B39000D9F5A3505FCB12D90395CB8536B4CFE254
+:10B3A000BCD14769BEC5DC2E6897BFA6F51C2A89AB
+:10B3B0004B44797962D999C7EF41BDBE299CF4FF0E
+:10B3C000A4A56756603C6EA657701A21EF591A7DE6
+:10B3D000F77B986F343A5D903FABF081FB974591D6
+:10B3E000684F08B8CE8C9E75561632839BE239F1B1
+:10B3F0003396403B4FA3E0343B7AE0A1C77A52EF4B
+:10B40000F505BC3746FED0FA3FBCD7A8C859773EF1
+:10B41000CAD9A2C6E4870A705DEBF57C9E8DD1D7B0
+:10B4200053DE27393976B91C9EA9D83F9EA5B3575C
+:10B43000C6C3F7C06A41F9CEF156A9C8E540E38812
+:10B4400063183F0D2C17483E79BC52A21FDACD5C21
+:10B450009E4D78EF280A905DD8E53DB4925A2B7244
+:10B46000DEA37436178C58946FA7DFE3FE9F47FE68
+:10B470006325B69BD3A2B5832602FD0C40B8BC67FA
+:10B4800026FDE9F196D1BAEFF04569EA55AD8ED3C4
+:10B49000E43DAB8BAEC7B0E7AC7B27523CAF9239F3
+:10B4A0002291DE2A656E37C19F251BE633579D4FDB
+:10B4B00031B7C72A8BC17EA2EF5A7BB0C7FE893352
+:10B4C00020DFA87854F1133AEF5E7619E376D0AC1A
+:10B4D00075DA7ADD761030168ABACAE5DA76BF32C6
+:10B4E000BB9F45B9E8DE38E01BF2ABAE501E828050
+:10B4F000217F6E26E3711FA6E843D5CE2F597A51DE
+:10B500008F726866E3453DC273E6D21FE6A75F38D7
+:10B51000B5F3BEA1204ABB3E394E93BFD13544534B
+:10B52000FF66F730CDF75BA75FABF95EEE19A9C9EF
+:10B53000DF5E3D5E537F46FD24AD1C7A379AD6A36D
+:10B54000E2A7BF79BFA5E8A37742EC12359D3AE2A6
+:10B550003F1391BF3F2C67E4BF7C7833D3F8311D94
+:10B56000232482E7805C3DF931F7E5C8EF8F20BFE7
+:10B57000C94FF4A1C2F34373A1C928A27F62E47E3C
+:10B5800079A85F729039505ECED4B1FD42548FFFDE
+:10B59000670EF39CC7FEBAE30D4B0FF17843881F8B
+:10B5A00073A578FF7006CCBF0F79794D2EF7C316BF
+:10B5B000EE36AFFF38088EB56DD19AFCA2FDF1EBE7
+:10B5C0003F0ED63B4B041DAEB346E1935A16A07D09
+:10B5D00052BBE8A0FEEAC4402CE63B58676CB4F4CA
+:10B5E0008F838B0A0F808F253728DEA9FAC33F1976
+:10B5F0003E450A9ECBB4701A93CBE3905F8F10291F
+:10B60000DD9C23C7E7FE03F11CB49EF4DCBC7FDCA9
+:10B610007A2247C859089F9F1BAFDFE31E0F94177C
+:10B620008E900B7F26B84CFE47C2A547CF472FD838
+:10B630000DFAA3729D81FBFDDE335CBF3772FDFE08
+:10B640007CB48FF6879BF344E70E07ED97D23EE973
+:10B65000A17B8D611918DF59A1237D797A99908199
+:10B66000FEC226218CFC360FAB4816C8BEB978C87E
+:10B6700048FD31AA07EDFD3A90F351053E6B09E410
+:10B68000DFCCE571B1356E714A8A03F5F61FAC1E49
+:10B690008A8B7AE2111E9EFD30E16B69DF45EE2B4D
+:10B6A0007E12D06BE5D112858F5FCCD5D13A1F2E9B
+:10B6B00014B99D942ABA701F6315D8A968570696C5
+:10B6C000EB285F91C7E9596DF71F0A9DC794DD14F8
+:10B6D00086F388DA24BA7D7D8CFB512E8F0F3D795D
+:10B6E0005718EDB3012A7468EFDBBDD6692E58AF49
+:10B6F000BDD0968DB6DFDADC68EA6F4D469715CF80
+:10B70000A1FC8C7478CA8EFEA0C0FA8C33CD55E6AD
+:10B71000ABEE0F5894FE36E941BFA29D2298281E39
+:10B7200061F11AF9F91567B126DECA1C020B6EA782
+:10B73000D6F328F46AC7421BE197F6EFD578B15DDE
+:10B74000A117A41BC4BB4ACFA1FD8389EC8DCCE912
+:10B7500089F3D915528E1AE5D98D748FFDEA901FA1
+:10B76000BC5CFE076EBEC4E32CDED7DEC37988E185
+:10B770005F529C0CEC4ACE5F4B43E2BE3F914F02BE
+:10B78000660ECF4084561EDEABD0C9DA7F82DE481B
+:10B79000BA02BC3E9CCBE58FABC0FD36CA3BC7B2FC
+:10B7A000D430A2FB1F0B2796604538515EBA723821
+:10B7B00079F33D1F109E74CC6FB4717F0BF9E17269
+:10B7C0007CA4C23149649EBEF4F2883CE5FB1BCAEE
+:10B7D0007EAEB76AC80FD9612877C502C6D22CCC15
+:10B7E00061BCB6FF7A0E9C8F85E86A39D2E5AE96C9
+:10B7F0009430E4CF6465BCCA9BD2A70C77A05F20CD
+:10B8000018D00E04BFC3C0E33FDC4E57E57A4FB9F2
+:10B81000D67EC4724F668F1FA6DAF7EA773C97820E
+:10B82000E3AAF359A5D861FDCD7755124B72A2DC7E
+:10B830005A768F80F0DCB15AD4F87D715E612503B1
+:10B840003F3ECE7FAF13FD8E38B0AFCD28CF75F51C
+:10B850008233085E817B810A381387F82BE04FE240
+:10B860003ABD67895E42C757D7B1AB858F1BE75D8D
+:10B870002CC8909F54512FA0DFB756997F5C05A329
+:10B88000EF69993E01E3219E16568AE3555633032C
+:10B89000C6F52A33995386F2CAC64374DEEDB9025F
+:10B8A00039256F20C94F3A4FE32AF0A4E7011D4D17
+:10B8B0004D28437667B84B86F1897F161DA7B54C96
+:10B8C000F0A2EF59D4E23C84FE01D011C57D3C2D9D
+:10B8D000011A5FE7E571725D8BC1E98075488D657E
+:10B8E000B4FF21551B9C32D43BB629DF8FF1952D37
+:10B8F0008DDCDF0DF59374D6FAD7C3D15FAB109909
+:10B9000044010A792AFA5956852E5630773BEEF7CC
+:10B910003319FE41BB48A5DC5A3D6F2A6622E5D0AB
+:10B920007883DC139F409E6BDC40B2D394AA8D6772
+:10B93000482D2BC9AF33627DA8AC0F897748D5A5B8
+:10B94000141797ACDAF25BF32262088E593C1E9E04
+:10B9500073EF888DB7C27C727F79E31F303D8741DA
+:10B9600033805BFEB23B074C87FF16ACD87823A62A
+:10B970004FBCCEE89CC18FE057668CFAF1FCFAE828
+:10B9800095F2ABB2260FD0B9C2AF7DD2BF1A4F0924
+:10B99000E54F95FE43F94E4DD75E867FD7260512BB
+:10B9A000910F4FDF3B3203DB5736DE73C8C7885F2A
+:10B9B0000507D077A577711123BA605697D05B5EE3
+:10B9C00084370B49ECBF371F3F867C3BFEEFE71304
+:10B9D0007F08DF95098CCE6381FD49F69C9AAADF2A
+:10B9E00023F2B93EBD906724BC4E46C10AAC3B056C
+:10B9F000DAE0BEC778604E2BA47F2EF03C8BE34D7F
+:10BA0000813C9EEF7BFD406B0CAE374BC7F58EA79C
+:10BA1000DB8EE67648B7FFA8D80F59063605EDDC71
+:10BA2000C02611776E59E0C0E73BD6E2BE6BB9C9BC
+:10BA30009906EBCABADF48F484048AF6519668A7DF
+:10BA4000B8E5AEB68FCB699FB1D1C0D2286EE00EFB
+:10BA5000C3736400CFB0AA4CB257C3AC68AF7A8549
+:10BA6000A4AA881E7B08F5220AB42CEFAD53AC3093
+:10BA7000FEAE42B047337BEC1CD5FE599C9F4CEB8D
+:10BA800057ED2068C7B0DD8FE5A74A0B4B22BB19E5
+:10BA9000E683FBF7B64C2690ED1352FFF43223D920
+:10BAA000AF76AF7BCA70B45B97A7E6A0DD0AE39AD6
+:10BAB000246E7FFD3BCA67BB4EF95E28E6E0B949BC
+:10BAC000751F800574D1188753EDAAFEE7A563E7BB
+:10BAD00054B905957F9B2F9FC17EFF5972DD635539
+:10BAE000E84D4D63F879E0E90ABD8DCF37539A9E52
+:10BAF000FFB3DB73A7AE93FE79EBFE39D7E1FA9F74
+:10BB0000B18ED8FF21F8D83CF97FC63A6E99F24F32
+:10BB10005C87375F6EC8CF4379D646E788EC2E7EC8
+:10BB20002E1CE4DE3DBC9CCB398B930964C7FF74AB
+:10BB300079D784FD9D411F1CCFA17877083A1867FB
+:10BB400088A5A188ECCDA58CF681862CE5FB404329
+:10BB5000963A4D22DA03166E270E52ECCE414BB9BF
+:10BB6000DD19A79C2B888B117D32D43FF6CB5BCAA5
+:10BB7000E7C6E0BE9091ECD5E636DDF516D4535E0F
+:10BB800089CE8F86DA89D2D2954A9C5F6B9FAAF6BE
+:10BB9000681AE379FDB2B3B44FA7DAA34394F2B4C1
+:10BBA000A57C3F60488BD61E8DABD6DA8FFA82100B
+:10BBB0003B73A9BA7FD049EBD32DD7E9F1FC7FA81D
+:10BBC000DD897BB0A81407AB7A06B4FE4DD730F6FA
+:10BBD000747EF7F98C1CDC1F9AB95AD0E83955CF1E
+:10BBE0000224287EA4E2E343D473883FF734B55F90
+:10BBF000D26F3EAF48704C2E4FD79C5362EC7E1EE6
+:10BC00002F71733AFAF5EA116BD1AEDDB7EEC63794
+:10BC1000317D69FD9DE1E504AFF5546F7FCBC6EB47
+:10BC200030FF5076BB3D12E6F5D0A853EF09D0EFB8
+:10BC30006A3CE385EBB378298FB6149E8BD0B37A38
+:10BC4000DADFDBA40F4C9F0DE52B12451C91BE23C0
+:10BC50001D9832189D9F3059787EF5358CEEE33073
+:10BC6000E55C9F1A87093DD7B7CAC3C75905F0C419
+:10BC7000733596187E1FA939E1FEE908EF668781C2
+:10BC8000E139398B72EE4F62D5AE2AA877DC7EBFE0
+:10BC90007D16EE0B6718887EA498CE26C493D99E95
+:10BCA00063AFC27142E235CD29E9372059BCB5FBFB
+:10BCB000F09E67207D7BCFC92F319D2AB5EFC3F35E
+:10BCC000255246889FD26BBF9811DC9B87335F4A11
+:10BCD00032963B6E10914E75EB6F9A86FE54C150B2
+:10BCE000E71A584F5802F31B601E61BDF689797B35
+:10BCF000A9209CCED54896F5150DD8DFA808BA7FA7
+:10BD0000C0BE03AECBA7F34DF457F680A8473A0E5A
+:10BD100053F68FC3327BED1FD3FCC2304DE1593B4C
+:10BD2000E4C3157A5F637BCA87FB776B13526E108F
+:10BD30001D3DF5695F19D6BBF2BB1BAB685FFD26E5
+:10BD40009315CF9F8529FBCAA1E374A53A5B67438E
+:10BD50006AB418647316F1550F5F72E0D85383E626
+:10BD600001F5FA9CA73A6E731EC783DA9FD1C264AD
+:10BD7000B42343F7AD43FB817970BE56EAA9FD3188
+:10BD8000D646E70174888B517DB5ABA7B90DDFE9C5
+:10BD900024BB1FFF82E382CC1A43FC35AC55DBCEBB
+:10BDA0009CCACF0DA8F4182A2FA5D0FDF7D47A6F1E
+:10BDB00038E1819F2708AD1F0AD7D0F6F0B7335876
+:10BDC000DEDD60E1FB885DA99DB922AC7BA53D4726
+:10BDD000337F5ABFD0D37FEFFD3C6DBE4C36F6B9F2
+:10BDE0003E94077DCD77824EBB6F596CD1B62F8DB7
+:10BDF000D17E772568F39245E9DF916DA2F31A8E23
+:10BE00007C139EF753F9D818E2EFF78ADF2AFA2E4F
+:10BE100091C9741E7593DE790EE5C4E33340D201F7
+:10BE20007D3C2CF8CC582E55B45B510FC6ADD39346
+:10BE30009C7AFCAE5BCEE0BDA016A06B84E571F7EA
+:10BE4000479B6EC57CB148F10D9BFB7039D251CB3D
+:10BE5000775FBF371BCF9F3A0D74CE5B3DB7B1758F
+:10BE6000AC612B1E0B8ACB94CD69F0FDA12AE68430
+:10BE700099B02363632371FC2DD1A215F5DDF3D1B5
+:10BE8000F5FF8E7194E6198CF61942E15737D246C8
+:10BE900072366E75B680F75B1E1E9B5F8972310627
+:10BEA000FC6594AF90CA7DC517C715F0F8C0B6C53C
+:10BEB0002FC523BE37580FDB699E15A213A7D85292
+:10BEC000C1E57F8B85D13E7BF3A852371E4DEC72C6
+:10BED000C90E3C8BD8E2DE41F35E592D72D9AC9C81
+:10BEE000970158C851399CBE0C364AFD986E34B340
+:10BEF000F839289792C2E87C507FF681B484CB57FA
+:10BF00006C6FCCE9BFDE43118DF1C85CCB67E49F59
+:10BF10009F0BFD6D9DB199F2AA3C8D53E8BBBBDF31
+:10BF2000103DBA1BF04B72361AE42C9EC7638E8705
+:10BF300089B775F5C2B4203AD555807CCDE2E72E9D
+:10BF4000307EBBBEA834E387FC4C9D9BCBE51855E7
+:10BF50001EBBEB9761DC05DAFB515F633F78CE0FC8
+:10BF60005219D7B751A83F447EF30C8303EF39E849
+:10BF70002A400E437B5D82564F1C18C9F135FBC128
+:10BF8000BBCC9EA0384D8C721E66A3BEDE9C06EB19
+:10BF9000D93843746E07786CA96810FA8AC7C455FB
+:10BFA000707E990DF5D16FDE5291131BBC9E668C8D
+:10BFB00073C0D036D70F9FDBD385C8BF5D2379BC54
+:10BFC000BD67DD1CBE71403FA8879A4797AEE66A01
+:10BFD000DA41725567E56D6DAE7A3A07D955C1CF32
+:10BFE0005DAD13F87E82A4C4CB9B8BF249BFF44BAA
+:10BFF0002F152B499F84E2579D3FFDE507E91199D5
+:10C00000F1F119879BB4CE4CFAE107DA3B74F94A97
+:10C010007DD40B1E6D7FBA625136E3F8A85F10AF76
+:10C020003AE6C57B93A1FD952AFC163A1FC969E043
+:10C03000EDB19D8DF88BF4DB6901E0C8E982CEA1FA
+:10C04000B3F7383CB7243A7C6BF8012ED28774AE34
+:10C050002BA5F7788F098E65B8EFE87D5DA2F3E731
+:10C06000A17A4FCDAB7030B136E79C3EEC4D9C0FC2
+:10C07000EA3569A7D789FA01D0978AED362A4B09A4
+:10C08000BBB3D45CE0E8ADD7BA5C6DABAF82729362
+:10C090008399F6033C4C53997F30C079ED33CF1C24
+:10C0A000BF8AF53D0EAE03F899E0BCE6F94733E6EA
+:10C0B000407BF3EDAD26B4B943CFA1F56EEFA47686
+:10C0C000714BAB4CD319C5236554B986080BD9AF56
+:10C0D000CC7486E4B334C9C6EDA7103DB90EF85050
+:10C0E0008FF04A6404AFD03871E8F84905C9FCDE26
+:10C0F000E4E2521A774345A71EE3905DAE7AC54E3F
+:10C10000F2F4A9EF42FBB17B3AA723FF77151AC8D7
+:10C110001E7EF8C1499311CFDE6512C5D17AD17B5D
+:10C12000C8BA3D23F59CAE1C8BCD287FB7CCB9DBBC
+:10C13000ECE8C3FED852318BCE2F5A96703B63A5E4
+:10C14000BD81E488A542B9E7A2D8CB71AABF13A2EA
+:10C1500027B7543798F1DE9B7ADE9085D8DB97EDD0
+:10C16000BF1FBDBB61F98BF1A84FEE2A6988C77963
+:10C170006F89F04F7713DFD5939F02F2381EE5F1F8
+:10C18000A2910E922FDDF27FC6393B0E1E18695523
+:10C19000F88ADB435FE27F41BF668D92A714601C83
+:10C1A0002DB5448E7660BC74DFBBD300AE93BD7AF0
+:10C1B000F2638DFB81F4C12F322638495F9E1E68E1
+:10C1C000B0229DAC6AFC468FF76BCEE2E955E87F62
+:10C1D0005502B78756C51898DF42F3A1454F752E13
+:10C1E00066A8A7F509DC3701BFC58F79162310FDB6
+:10C1F0004C8EF1BAAD00872931BEBB30AD4AACD709
+:10C20000D9609C1247B480F09DA263C5061EAF9D05
+:10C2100085F35C11F311C55927A7C5D17D54A3C57A
+:10C22000ADC3FBC97A67D5F6B58CCE8B51BC15B0C2
+:10C230004AF7E18C18C7BDB6278EABEE13A9F1DC27
+:10C24000750529042F21C1FF2DE223CB1A10F11E01
+:10C250007E983E40F6F8AA4613F941CD093BDA91A3
+:10C260003D3223F83EA47A3E17E063B1027C560CBF
+:10C27000BC9BD6959414BB17E7A5FA91F120AF505B
+:10C28000DE6525CC9B8AEB4B7AC3ED4A867AC60CD9
+:10C290005D366016E0EAB9A278AC1EC6213C58D8DB
+:10C2A000384CFBABBF22D140F1D8D0F2270B785CE1
+:10C2B000320B0521AEEB5E13DDCF5D75E0BEF7AA54
+:10C2C000507E1E3039C967678114BCFFDE1D77665A
+:10C2D0007CFFDDAE9CBFB5DB0D743FA63BBECCF84A
+:10C2E000BEBC1AE7881AE5D98C78F231C721F4C7A9
+:10C2F000FEAB718F1B46CA4F607FAC6DC015C56326
+:10C30000C2C6EA689F2729857982F7055629EB5F1F
+:10C31000D50D877A3BEAF575289407F60F878D3798
+:10C32000E7BB2622DD46EC8847FDDA47BC431317FE
+:10C33000C17B2879B10462FA93AA799C2466EA3C0D
+:10C340008A774853F93ED90A1660FCDCA0C0847C89
+:10C35000BAEA4BFD0D7087E8D7CC7A929391AE90F4
+:10C36000B8482F7F45E6766588DCDBA2F0F9F1025C
+:10C3700025EE91CFF2BFE79325BB2852D9F7891854
+:10C38000954272E811570AD943C41C41F0BE9C9DE6
+:10C390007350B1877EA79C8FF72BE7830F2BE78322
+:10C3A0005FC5770BC0903F86EF16407ABCC949E560
+:10C3B0006F341528CA99E36F45EE9248B21F94F97D
+:10C3C000E994F9ADB04E7325037E566DD3D37958F9
+:10C3D00063C284E968CF32AFDC9E11DB73EF8775EF
+:10C3E000C2BFFC9E73A75D091E3A4F3AC7CAF73F0A
+:10C3F000557C2D54EAAF12B619905FC7766AE136C4
+:10C40000FE52A4C6AE2C62DAF397134D4334F54BBB
+:10C41000ACDAF39793ECD76ABE4F7668CF5F5E973E
+:10C42000313E641F564B570B13806E804EAA337DEE
+:10C4300034FF85D6528A7BCD0DB9C77447AB363FE2
+:10C44000DFA7CD2FDCADCDABE7C9C34629F43092D1
+:10C450008DFC31F14EE4F70C85EF0701BF6FB33A65
+:10C460009911DACF1678BFF81EC6001BED4BC976BE
+:10C470008C23ACE3F79FB05CC7CBBDC395F67ABE07
+:10C480006FC58EDBE8BE1D4BCCE1ED06F0EF7EFC08
+:10C490008EA4F1720EAF87FE12D61BA2F453C3E531
+:10C4A000939C45FE829BEC33236BB3626A01FEC210
+:10C4B000349A39E99E750CAB27BF7590727F325163
+:10C4C000E8A4BC43B086613E4570A6F0F8858FE4D1
+:10C4D000C35049FE752AF1895B7447F4E6970DB99C
+:10C4E000BA07F0AAF8860291E4E2235646EFF9D89B
+:10C4F0005CF713BF6EC316B06E336B8F49157AF8B5
+:10C50000E7EDBC61C45F135C0EDA2FB515240B7820
+:10C510002EA588859CCB364569E8A3C41A17425FCF
+:10C520004342E84B4B7F7F9DECD5453990CE42E8A6
+:10C53000F02FBEE5512C18AF4C8FFA058FD58976B8
+:10C540004A059ECA02964F75469B31EE678BD173A2
+:10C5500079A5D83FA54A9FABE459EBB2E1FB6B56F6
+:10C56000D149E6F6BA2D3DF12518DF9600F635EAF9
+:10C570006399915C7DB0D31F7635D47F04FCFF6551
+:10C580000CFD1BEB64BCEF65B5E4105F3F624979BD
+:10C5900000F35ED0E8587F4331F7AFE5E86C82EFF7
+:10C5A00051A1BE05EFA53DC2F24CA9C1F52DBCFEBF
+:10C5B0007A596451909F183182EABF9D6766F8CE20
+:10C5C0008177A0D98771EC63F2AC77DD41EB7F7B9B
+:10C5D00014D707AF191CF1A80F1E997C77A687D234
+:10C5E000748D5F684B10E4BECE17858F3672BD9296
+:10C5F0005BE2C7787C74C234579903FD1DB70BE921
+:10C6000042E712F1E85B37FD442B7EA8E406C10F38
+:10C610004B9B745D0E43FFE3110B77351E299ED5AE
+:10C620005286F90291EE03D95CE2EBD9B8AE027EF4
+:10C63000FEF04AE571A81E18329ADBBF9386443C8F
+:10C640003014FADF50245AB1FF0D7A2BDDE7F14E9A
+:10C6500066E45717BBEA97E0BC6D09110CCF6FDA9F
+:10C660000A1A78BED8C0CC004F936BBD17F1694A47
+:10C67000F58CC0F647077E7A1CED195B82483A704C
+:10C68000A2CBF9AE1BEB1728F19DE279EB703C9B36
+:10C6900045B49A590F1C54B9BE9EC9CBC9FFB20A02
+:10C6A000F4DECC0A6B430DCEE7918470B2F36DAE2D
+:10C6B000060BE279C3403DD14149227F576A55C2FA
+:10C6C000B40ACCFF62A09171BEF32F1F8AFE815382
+:10C6D000A075355B1A685EC72E8939C1EF96A8A987
+:10C6E000D9A185CFEF46F1F89009E3F1809FB7F526
+:10C6F000CC9C9A8BF4A3A778537F7C6B735DCE7E22
+:10C70000FB61FE2A94030B11BE8597C2984F40FA35
+:10C710003D2961FE777F015B80D6D960C1FE416E05
+:10C72000BBFAA2BF88D19C7E9B0B0E4BF84E82D7E2
+:10C7300021101F345B4E4E443E7828B58CE8E8A1AA
+:10C74000828F9A892F86F3FCDB79F7EE413C7A13CE
+:10C75000C3697FE7A1825931C1F4BE609448F432C5
+:10C76000EE6F614E3FE2639481F8FB9108C7568CEF
+:10C770004F79F3CC64BF4B8275D96C98E7C46228BB
+:10C7800087FEA25D623EF17E75058F0B2B307ED554
+:10C79000653B84F8904A66317EAE4939F71491EFD3
+:10C7A0005C4335B4FA6F952597DECFD892D07042AE
+:10C7B000D9B620BB6A9022570694884528DF0659CF
+:10C7C000B85D65EB940594BBA1FB47AABED729EDE4
+:10C7D0008C325BA6A3541B37D215707D1B6A7FE990
+:10C7E0002CDC5EC33FBC8FAECF353F89E738743158
+:10C7F000DA7A7F19A59C730AB1AF543ADF60E57A03
+:10C800006243AED18774BDA198DB592A1FABF247B2
+:10C8100085BF2A87D47B7EEF28F695514E5E3687FA
+:10C82000E4EA99E5786F07D49E7317C37B8956FABB
+:10C83000FEAE721FF194626FBDA7D85BFFA1D85BFB
+:10C84000EFA3BD05F986518308BF37142E76DD08A6
+:10C85000F31A902011DF143A4E4CC4EDAF71192732
+:10C860002C7DD96111D1A20EE3058F34F27B4936BC
+:10C8700097ED9815F159CF95F92C6B766934BBBCBF
+:10C880007CF2E37AD2D13EE4EB7B55B94F794C99F7
+:10C89000FF7165FE6F28F357ED8F4943BE32A1BC8F
+:10C8A000DF10AFEF477E29FC29A7D0B9A85079B592
+:10C8B00001C408E9EB2291FC9F2078E76AE4BD25DA
+:10C8C00020F7F54E59C9681EBFDB6076572C467CB1
+:10C8D0004E6614A79DE8AA27B96503B94572B3F857
+:10C8E0005CEB6CCA473883E59E518163B1CB5A8EAD
+:10C8F00072BE38464F1F5724A4D0BD5BD5FE0E1D17
+:10C90000F772F00C9567A682F55EE2F3FF47726C52
+:10C910002CE3E38EBD243AFD5CDE1C4F2679239187
+:10C920007C0AED5F95376F63CC6420BE4F64A1FB3A
+:10C9300000770A614E84E79D287C303F97D17DFFC8
+:10C94000C18A3D6757DED1014EA1B8CED84EB0F5B1
+:10C9500083F87AFC2553F71B6CDC8E8FD6E4279A7C
+:10C96000E235F54BACC99AEF93ECC335DF273BB208
+:10C9700035F9EB324669EAFFC259A4C9DF50305994
+:10C9800053BF4C2ED3E46566A577480E36ED1EFAEC
+:10C99000B11EFDA7B6A11FA7F5864FA1F1F00B0EA2
+:10C9A00060E1B5A38B67E80046855187EF4C86FCB4
+:10C9B000C6D19367E880EF0A071FFE3A195868D37B
+:10C9C000E8293C7FF5E1AF5320BF65F4753C3F8615
+:10C9D00091F0DC3A7AEA0C2FE0591CEA797434D0F1
+:10C9E000F12D97EA8FA23DF8C765D3E6264BF84EA6
+:10C9F00040596206CCE76C8AE761FC7E73ECAC15AB
+:10CA0000781176FC77F5748FED37A379BB8E8BFCAC
+:10CA10005D8D8E8BFC1D0DBBC8F1F65353F5BECB5F
+:10CA2000040E9A7EDF5F11647EAF05FDCD3969DCAF
+:10CA3000DFC414FD4D4CD1DFC414FDCD397AEE6F47
+:10CA4000628AFE2696A3BF89E95B4D32A5EF34B911
+:10CA5000286D6F7253DA7DBFE029E76A3D0A38EF2F
+:10CA60004F8B5B98C3E417114EA1E74A3AF49D4FF0
+:10CA7000D07ECA45E6C0FB1287224E3970BFAC3962
+:10CA8000CF44742E74B63B4CF0BD3097E79B2FB665
+:10CA90003B507E611EED9E8EE8B66C94BFCDB51600
+:10CAA00027EEBB355FF4C7239F14D61BE8DE4C711D
+:10CAB0006727C5E90A2DFCBD844311C78E28E39181
+:10CAC0005CDA7991F9457C27C7DCEEB02AE3603F58
+:10CAD000306E32EAB7C225302EF55BBF98FAA9B0A6
+:10CAE000748F2B848C6BFAE171270A41E3A67631AF
+:10CAF0007A1701C77568C6F54B743FFCA25FC27810
+:10CB00006147B4D38E714D355F8CDF21BF45CFDFD8
+:10CB10005F2C74F825D493B8BD89EF5BC681D833F8
+:10CB2000D3790D1FC965A84771B99D5D7C9D179A82
+:10CB3000FC0B909F8A957760C08CA57B9B4C0C73F7
+:10CB4000A2BE2891BE3B363817DF39E3EFA0151B94
+:10CB5000DDDB901FEB745CDEB01833DF57D0B5CF50
+:10CB6000FF15D43B193B98EC9504FB4B2C7504B492
+:10CB70005FE4CA44BBE3245B4F72687594E77F8F20
+:10CB8000067ABE31B35E50F427F5637785EFC0FDBA
+:10CB9000888E5786E5211F4D333A5E64C0BF7F1FE4
+:10CBA000DD44FC3C2DCA91872FACFD7DF40A9E8F9D
+:10CBB00073BC883783ADAC694671FC8F3F2F45F15C
+:10CBC0000D749AA70A3AB47FD4735376D1133606FC
+:10CBD000E054EBFACAC0E7D769C07870D41807C12F
+:10CBE0006FE06146E7983A2747F876E07EDF80FA03
+:10CBF0006C8C87B24C471ED64BD277D27DF28EEF2B
+:10CC0000F8FD27A819795350FCFE898392ABAFF841
+:10CC1000E3C931DC4E5D946A598778A8B39B4C9484
+:10CC20001EBC48E78299CE9D8AF16BD9D0F77BA9CB
+:10CC3000AF8EE1FA2179A54131024174C294E53009
+:10CC4000A6E6BD0CF4D0F6BBC3BADF8B037032434B
+:10CC50009AC8F3DE1D8F17EB34F565ACDFFD1DE3DD
+:10CC6000F4ACA7BDFCDBCD8F2F4F55C6437A99C7D7
+:10CC7000C87F0CD53B6B0B6DEA3B3F84E7C763CCA9
+:10CC8000DBE93D5249798714EA5A314E11CEE83D2D
+:10CC9000AEC1BF37FB9A819E769A393DA78A3CDDAB
+:10CCA00029F2FAEA3BA5EABB6BCF147A6E2BCCA330
+:10CCB0007EFCD48FB4371BDFCB88676D34BEFA6E31
+:10CCC000945A2F01F420092B5D673AE2AB5012FB16
+:10CCD00084E7E7638AE6201D5C68F2B24F82F4CDF8
+:10CCE00085F0C8C660FCD549DAF75A3F1F3381DAB0
+:10CCF000A9ED6B1B27B24F2878E9273AAA4D156991
+:10CD00001FBD4E62AFE23B9C20590DA897D576A778
+:10CD100040DEE278EF82FCC5F43D90BB9FE8D13E57
+:10CD20009D4EE9FB4D1E2A3FDD544D69A0A99ECAC8
+:10CD30003F6A6AA4F496DB2372917F16ED5FC63ECC
+:10CD400009A2F7DA36BD2710943F55D4371DAD51EF
+:10CD5000E8E85472DFDF9F1CC3EDBB53E3383E3B72
+:10CD6000C0DEC0F7DA802E975B6DFDDB1D1DCAFDAE
+:10CD7000AEA3E3F9FE65473CCF2F1FC3FD6E596498
+:10CD8000ADD8FEE87803EF3F45ACC6EFB28DF77B38
+:10CD90002A5DA477A47E35B1E8FE31583F16CA73E8
+:10CDA0007AF2A7AEE2DFE541BC5C9DAFFAFDB64288
+:10CDB000ABFAEE613A7FCF8FDFF7027AA7FED5FAA2
+:10CDC0006326703E0CADEF4BE5E7C943E1F1A9C224
+:10CDD000B7C4176867231F2407F1459D83F842A550
+:10CDE0004395FED6167238A71A153A0FE7E7EE07F5
+:10CDF000A32E847683E3CCB48F20E3BBCBB09E9D7F
+:10CE000082C22FA1FCA0BC63ACF283CA072ABD0F6B
+:10CE1000063EE3EF34F3758C95FA795F5859477BFA
+:10CE20006CC45D84D7837A2BEAADB1127F2F79B0C1
+:10CE3000D8F5CEEDC89FB1110E8C9196ACB2D4F757
+:10CE400025C73EFEAFC243950BFDC0A3171C0CCAFD
+:10CE5000BBC33F120E24E7508E23FDF621B74E8C44
+:10CE6000B1297617A7DFCFC7C86F221D7508661DC9
+:10CE7000DE7BE830F77D5FF0E878BE0E958ED61643
+:10CE8000324A07E33A87F6967BEA7ABAD7790723DC
+:10CE9000F9971AC6CB43F1ACAE2B48FE9DC179A9D8
+:10CEA000F0640CEC1FE827A1C642EFE8DD56E8E08D
+:10CEB000FC36F0D3CA0DAC67FD358A3E7B4C94F846
+:10CEC0007BC88A7EE92E17A49965991ABD4347CF7E
+:10CED0003A5FE1EF8AFB45568DEF72A36F1D1C1779
+:10CEE0001F52C8E543D7F43C11F7132FFCD542F786
+:10CEF0008B2F0CEA3C8DF6CE85563D53DE239B2AC4
+:10CF000080DE9D8B3E130CF9A5F29EF3E7E8F70E49
+:10CF1000837A6D174FA3BDB568ABC44C789E60EBA8
+:10CF200037B7203DCD7B454FE7999A5B371E477A4F
+:10CF30003CB74FC0E76FD9857D02C5316B5B227C62
+:10CF400066A85F0A79AC7FC76EC9C7E38B32C53963
+:10CF50006A94F13E31D7A5A05D3E71EB5D3A84FB4A
+:10CF6000BCED028B837E8FB4DE790CDF1D39B78D6B
+:10CF7000DF2F6B3647EEC0F9974AEB0C83A07CC1DC
+:10CF8000765E5E6329FD0CF743173CCD28FEB36047
+:10CF90006F04F98FF35AF41F0582EC8EEA6DDAFC08
+:10CFA0007CD666403A58B0535B5EB307F241F279E3
+:10CFB00050A1122F19CEB2295ED2C2E307AA7CEF8C
+:10CFC0006D5F7BB91C6D50DEFF667F89A5F70F5F33
+:10CFD000F926E9230BCF9729F93390FFEA1B8E1727
+:10CFE000152E75CAD85FC5B3DC365867DD2B662BA6
+:10CFF000FAED7507CE46E279B04561017A1799BD21
+:10D000002C59D1DE7B60BFE445F8D61E343F89FB46
+:10D0100098752F9E30603CA174DF62B2572631EFC5
+:10D020004AF49BFDA2C8DA898EDAE97D5F2677CEC5
+:10D03000C37E2E1C305BD10EA87BF94FC76EC7FC98
+:10D040008B02DDA7BC9018203A99B755A27B430C00
+:10D050002DB4FC1E3A9110AF88E7B6287A8FE50E02
+:10D06000C43BE219F0EE48463AE171D0794F4BF4F7
+:10D07000BDB9B5D980F5CFF9387E55BC974A4B0973
+:10D08000CF0B1EE7F89CB875D7E630A483A7F564EC
+:10D090008F1F817683783B0D1D185EE1FD5FD8C53B
+:10D0A000CF9177D3C10163371DE03C2F4707C0A75D
+:10D0B000A4F72F47079DE89792BFFFDDB9C7D00EB1
+:10D0C0008FE0E787D5771BD5771A072E3C7514DFDD
+:10D0D000E74AB3BF407677A5ED8BDAC58CDE099DB4
+:10D0E0005388E74B26BFBD02D17772CAB3D9142F3C
+:10D0F000D507766DC178437438C5C73A92CBB6E18F
+:10D10000FB98C5B66F93F6C23A16FDCE48E711EB11
+:10D11000157EC63F3C07A2BE4B0C78A7F319B50796
+:10D120008DFC5CC63EEDFBE11DF19CCE4B0C9D954C
+:10D130008BD14F80FE701C41E6FEE9C283FC1D4589
+:10D14000D59F5CA8BEA7B847FB6E83607D9BEA3D78
+:10D1500050984270181A37D68176797339F3840D56
+:10D16000FD217DC1DFA97C5CF18BFAB527FBD11BCA
+:10D17000AA1DC9BC21F7DA15B97547019FE3D1BBD8
+:10D18000DFD0E17B8C1D3BF9EF3BCC3F08F22A0658
+:10D19000F719F51AB953A7D4FF14E90FE076DE5B4F
+:10D1A000FF922805CB97F78BB19F9AA7793F7548D7
+:10D1B000571457F56F0E83FEBE6CD333E497054CBE
+:10D1C0009137FB23286ED44BBEECDCBE12CDF7505A
+:10D1D000BA5A0876262E2294BEEAF669EB3D5DA87F
+:10D1E000EC7B0E67D7E0F9FFAF31E090D7235FBA51
+:10D1F000DFE9678E28E4EF6E7D2868EFEF0F6B059F
+:10D20000960FEA77B8CFC463A44AFEEADD564DFE16
+:10D210009A36BBA6FEB5FB1D9AEFD9FE0CCDF711D1
+:10D22000C79D9A7C5E7B81A6FEC8F7644D7E54C084
+:10D23000A5A93FE6BC5B93EFCA84F5F461CFA8E9EA
+:10D2400024BBA0A93FD961D6F47F5D46B426DF6533
+:10D2500051E0A3D899AAFDFBA7426EFF86A62A7CBF
+:10D260007FE1D48EA3FAED371468C72B93B5E35D45
+:10D27000295EF01D419D9EFF7E02A6F8FB09BA348F
+:10D28000FEFB0998C7DF4FC0147F3F01CB7FDDE471
+:10D29000A4FCBEA602CABF047E09E6F7839F82E90A
+:10D2A000CBE09F60F9E5E0774C19F7B832EE1BCA86
+:10D2B000B83F154E6F29FDBDA3F487EF0DEAF43D8D
+:10D2C000DF6B5D79E225E0E322DB67745F596E086E
+:10D2D00094621CA3F37589E1F967E6F11D6F8A4139
+:10D2E000FD3680A19DC4DC9D6FE23E6EDD8B43ADBB
+:10D2F00078AEEF81FD7F7807BF5FD82751BCE6F09D
+:10D30000FEB391D8CF9797C2E9300AE945C8D77CD8
+:10D310002B507E0D7CC7736793F74ACABB676DA419
+:10D32000EFBE4C55F33EBA2FEDDEB3D780785AB836
+:10D330007B2F7D7F1DF85AF37DF776CD772BD6872F
+:10D3400074A1CE477185CFF7ABFDF9A97E4D2A7F39
+:10D350003FFEF3DD47568E417DBCB76A00C6B51768
+:10D36000EE39113BFB07F0F1D54BCF66A21EA83D6D
+:10D370002029E7D1787FB507F44A9ECFBF26756F85
+:10D38000299E37637B04BAB3F4255B4FE7C416EEDE
+:10D39000DF5583727661C6ED7A8A7FB5494ABC83D0
+:10D3A000BFD3506365DCAE6BFB3A12DFA9FF7DDBB8
+:10D3B000D1EBF11E74C7C123F45E4CC73E49E34F65
+:10D3C0008D1DCBF13B762CF7FFBEDC772412CF0905
+:10D3D0003ED07684C35DE7A7F51F56F21D9012BCC0
+:10D3E000F74BB4FEF99724CDEF01B8C071A1FBCD86
+:10D3F000FBD322705D27DBF878D3407D50796AD566
+:10D400001C9CFF1BF6F23CE57D32FADDA18EABAE33
+:10D41000DB857276619BD4E779F739D82FCCEF980A
+:10D420009ED3E9EBA92F1C1B04707FC335209B748E
+:10D430008452AF622CD79BA5064F2AEA91931647D8
+:10D4400004D2F9FDAEA11188DFC39862B9EB49BAE5
+:10D4500007BE601F1FEFA4B53D12E9EEE4BE1152F6
+:10D46000F0FECB2DCA7ABAE9BB1B6F5EC253B56F13
+:10D47000BB05FBE9C11F2F9F36D64AF5DFF09DB8EB
+:10D4800005EDAC9319FCDDC0630646FEF5C23DDC3C
+:10D490004E3E7970F0F6E0FB59D3147C7464F07D55
+:10D4A000F50BFBF54ABDDB77314D3D3DC7D74EED62
+:10D4B0007CACBE330FA17D5EF3B844671D6AF4F502
+:10D4C000B1B8FE4FB769E757ADC0B946EF8F8D0DC4
+:10D4D000A2D79A03DD7C63213A3FA0F28983F0A9A9
+:10D4E000E2F16486C4E765E7EFF8D5ECDD4574DD6D
+:10D4F0003BBEC4E3B783EF313929BE74197F5AB5F7
+:10D500001B82FC2DFABD23BD6B689E98D2631F9CC5
+:10D510002E941F1A9B877E989BFCCC930CEC5B1877
+:10D52000B316EDEB28FA1D89CD386ED73E3DBDFF11
+:10D530005F6B3AB000DF23EF7202A3C0BCBBB6E959
+:10D54000BBDF67463B779E62E77EEAF0E44BA07F55
+:10D550006B9789B4BE9A3D920FCF175C50E4DE57AB
+:10D560007B936F407AAD392E59D13F9AD896FC7093
+:10D57000612EE977B257EBDAB89D5CB75B20BB58F8
+:10D58000B5436A153BE49C62079F5BD6C9EDE35740
+:10D5900004B611EAAD0D037B04E65D9B3985ECDA38
+:10D5A0005A69DDCAC10E3C47A5B51BE61F3C44E7DE
+:10D5B000AEC0CED1942FDCADCDD7B669F3AABFF8FB
+:10D5C000D2D86E3B6338FA372552611CF2C39B0AEE
+:10D5D0005E557FE7CE6B9CF4FB270FE81C53D4B855
+:10D5E00004C26BD12B2FCCC779FB6AC29CE47F3479
+:10D5F000FE96E0DAF117EED774E0DE1BF233E3F0CB
+:10D60000EDD8CFE97C915EF0E1EFBA2C425D81FD6F
+:10D610009904DF328C3B7BBB22493E29E7081ACABA
+:10D62000B9FF2A630C18A6B27E2CF7E743F5EA3857
+:10D630005D408A0E921381B12954AFD8C0CF57DE16
+:10D6400019E124FD36C4C4EDF521266EAF0FD17566
+:10D650002EA3DF851824F07D8EAC9769FF606D9D49
+:10D6600085F617047B950EE1B17650950EE97D881D
+:10D67000B52D03FD3A355F8CDF337BEC83528B474E
+:10D6800087E3EC8C17947D04AE4FCB74567D749079
+:10D690007E656C99667EEA3DCC9F7D7E56989FA5FF
+:10D6A000677E80EF286CFF75AE93EC86A432F5F7A9
+:10D6B0001AEA492EA8F0FC12E8BD187045776C8173
+:10D6C0006E6AB61D22FFB296B5AFC476A5917C1DD9
+:10D6D000A506FEBE5169184F75E3B8FC2A51D2A5C4
+:10D6E000E3B4F6C39171B27E1CA43BC6B94DE3F21C
+:10D6F000683F9579617D0D6FF377D643E53E9413CE
+:10D700003D7D0D7C88F26F46BD604DD5D8699CBFCC
+:10D7100016F1A26E3E5AF8F693C427EA39CC6AC6CF
+:10D72000F97B66A3D99A1AC4178B90DFD0DE77C332
+:10D73000BF7C8C13F0BF6AEB7C3A97E9698CB5A289
+:10D740005FB748FA92F6257E2CDF2DDAAFCDFBCD00
+:10D750009CFEFD1102F94919E3BAE30DC48F490A91
+:10D760007F6CF708740E60FB773A1ECFAB10287EF3
+:10D7700077331436DA944962BDEA22BA4F7233E342
+:10D780004763594B8CF2BB3D31B46F7993B2EE9B3A
+:10D7900075FE4328578EEADB92319E74B4D6E4C4FA
+:10D7A000FECB591BBD6F5AC1DA293D155EF7A29F0A
+:10D7B0003AF72622DDFDC963A478D6F6E53B225070
+:10D7C000BE67B1E556DC4F0450ECC6B701FBB3733E
+:10D7D00042F71DD5FBC4602FC7217D02FE27211D06
+:10D7E0009C07DCD8737AB75FF8C71723117F5F2CCB
+:10D7F00079E1965B19FA5F9DE4472DA85F46F75DD6
+:10D80000819CDA33F27BF0AAE25DC55B375E1DF0E6
+:10D810002F18AFB0A6048493F46519C9A57F91E8C9
+:10D820009CD6E5F0AAC27DBC829F3B0E70F9158A9A
+:10D830006F150FB7E2BBF54349EF6E233C3123C9A7
+:10D84000CB507AB81CBE8030E93CD9C41823F9A16A
+:10D8500083452E4F07CF13285E793BF3BC1280F42B
+:10D8600096F0F7F5FCDE0AC75B8582B73F31DF2F04
+:10D870003292FF71783B32CEDD346E606FBE0DE5C3
+:10D88000D3FEF8B2C6E1FC37555FFA18F263083FE1
+:10D8900087F06B371E9DF02F088F9EC648E2CB6E37
+:10D8A0007C4B7BAE4C2FE27F308EB55FF0F993AFAF
+:10D8B000805F0546BFBFF8F838ADDE54F1A6C2A5BB
+:10D8C000BFB8E007CC7FD42AD0BE0AE7E3BB8D7493
+:10D8D000FF43DD5751F74F5E19C7F55C68FA01D871
+:10D8E0004BB85FB526E3E440B4334F19D47EF8FE5D
+:10D8F000EF07CBDA13F1F7B63E28E2E92903FFDDA3
+:10D900000F352F87F1B8E407F1462FC2E90361F81C
+:10D9100004D4331F08F75CCFF3710607E6CBE32688
+:10D92000E03D90537A358E79BF127FF0F179948F74
+:10D930002CA67A02FF5D4A07FEDE1DF62B0836177D
+:10D94000CCE783BBD2E87D9DEE7D8D71DC0E7F46FA
+:10D95000594777DCFF5E81E2FE335135E1FEC48436
+:10D960002D2E7C87F3F47D43B369DFB4413B3EEA5F
+:10D97000FD648A976EE0E7FE2E75EAAB82F45BB732
+:10D98000BE2DBEC8CBE7E4D1EF8CA8BF4727DB860E
+:10D9900073FFDCC77FDF50D5675DC75FB004C77317
+:10D9A0003F53E2DFDDF9E10F2605EBC3434FAD4DF9
+:10D9B000C77EAA0DDE2CA7057F87EEB124B45BAA33
+:10D9C0009F5A954EF6F4530FA4A35F54BD636DBAEE
+:10D9D0004CF9700FF9653ABEEE2F9E1B45E7F3D464
+:10D9E000FEF6CADCAFA8301D2A41BD3DE5EAAF56C0
+:10D9F000E0FE41DA7D02C5FF66B0F615A8672B335D
+:10DA0000385FB11613C97FE88FF66B770DFFC54EEF
+:10DA100094076F649CD5CF817A123E203510DFD5F4
+:10DA2000F2ADA3DF095CCD7F27B0A77E22EDFF56C4
+:10DA30002D17E89DAB19F5FC77F3A4F1D104C75974
+:10DA4000ABB38FD1FB574B79F914A36FDF49EC6768
+:10DA50008B81DF3F64EE94E0FB7092B25F38739D80
+:10DA6000F27B71CA38699B63B707AF5352F61D59F1
+:10DA7000EA7724DF6E50F03275E98957EDD0EF5424
+:10DA8000BDC73C1EBEBFB3E95CAA9F611CF4333A1C
+:10DA90005F9866F03C3A1FD7BDC34871D2DCACC179
+:10DAA000521CD4CF5952B411D3994BAB1E9D8F72D7
+:10DAB000B8D594CD8F35F2F935084E11E5F491EDD6
+:10DAC000B7CE42B89DDFC47FFFAB61FB30FADDC249
+:10DAD000FEE4DEAF9AF8EFF93DDD64A2F4D9262B1F
+:10DAE000C3A3EBCF35D929FFAF4D0E4AD9F43CCDB6
+:10DAF000EFD8F4D7DF884BE1F4BB73B9ABCDF43B7F
+:10DB0000880D4639753CC02BEDAADA1D0F28EBC2F3
+:10DB1000F7B8B2BDC913110EB90F2C3E86A6B37566
+:10DB20003CDF977DF3E4EA2414D6772C3DF3C47CE4
+:10DB3000F87EFB78F7350827D3B68B14A7387260C8
+:10DB40005525C2BB7A8791AF4F59F7F94DE9718FCF
+:10DB5000627CF9753DC50D166D3BF3C4030C7F87E0
+:10DB600077B12198DEAF74BD578FE77EE6E5F8AA5E
+:10DB70003F38FC78BE5A9B44FCB303F82AF3A7F362
+:10DB8000D5A2A5CB087ECBC6BB6F42B89DD77B93F1
+:10DB9000909FCE0F1F4B74EE7D4520F8AB72BCDB1F
+:10DBA000AF56E0BF506C5B5798DC23C7BF61B90428
+:10DBB000DF43073E4D47FBF99BFDE53FB8EE97601D
+:10DBC000DDFE6118AF33511AFA3DDFE019EA84F542
+:10DBD000E5F7F33EE8D2F16AFC9F9F53C03F213640
+:10DBE000F89D21E68D82F9D41C14FC6159A8CF263A
+:10DBF0007DA643BF11FCCF8F34E78C19FB28489FCB
+:10DC0000F737DFCBA575D84F5A8FDC1DF99EC8FCBE
+:10DC1000417A7B54208CF983C6EDF673A0CC40FB8F
+:10DC20004EF12417106F782EECC281E13B30FF9942
+:10DC300081E3F1C24B604FF1781093F27BD6F9D9B2
+:10DC4000812FB250CE86AEB7EEE52F883E6AF6AF92
+:10DC5000BA28D0FA277FA6CBBAFCFA0F3DF54516B5
+:10DC6000E2EF337D201FFDB60B864016E2A1EEB732
+:10DC70005C9EFF5838A8E5F3571BE8F73AEB04130E
+:10DC8000D14989F425C51F2E1CE7F187BA034F92AD
+:10DC90003CED3AC8E3408BC4F6D2388C9BD49F3914
+:10DCA00086F2ACCBCEFD31E89FDE712B1CAAE84199
+:10DCB0005D6712DEF73BD84D0FDC8F3C8FFC3B0CD1
+:10DCC000FB69A3F3BD2C2B9CA15DF139F2F3307CF1
+:10DCD000BF307925D2F979DFC01C948F6F66FDAD16
+:10DCE0008EE286BF0FA77BB2B56D92E69C79F73ABC
+:10DCF0007C123F70C454FB299CC9C1E7B90C8E1B30
+:10DD0000C86E7E83EF132EBA8AF3137B99F353ED1B
+:10DD1000F243067B507FBB157E52EDC829BFFF1B27
+:10DD2000F1E5B38532FD04D54FA5C7FF9FFEF74C43
+:10DD3000FF2F4133EC630080000000001F8B0800C0
+:10DD40000000000000FFA55A0D705455963EEFBD2F
+:10DD5000FE4927DD4913421208840642881A6203ED
+:10DD60008172D6C4E9FC6E2033BB016B2DC4088DD3
+:10DD700022249D7482E8EC6AB96E1A02AC6475368E
+:10DD80008C59471D479B9F8028EC769440C0A00D7E
+:10DD90000ACBA26B45AA263A555B54ABAC0EE0A663
+:10DDA00023823BD6E2B8E73BEFB5DD1DE24FEDA69F
+:10DDB0008ABA7DEECFB9E79E7BCE77CE3D8FB45247
+:10DDC00022CA226ACFCD082A0AFFA66EA245446D58
+:10DDD00029247FF641451FAFD364BC7D40A3C958B9
+:10DDE00093EB08CE9E415447DD269A45B4844265A4
+:10DDF000A471BF29F2CB5B79BCFE0D6D4117936115
+:10DE00001BAD6AB013D5A67A0B3614130DABCAAA94
+:10DE10008662CC0B952E9D4BF40DFE7E4A749B873B
+:10DE2000994F222AD3140FF61B9D9C16DCC95D8BDB
+:10DE300097FB1B494D98A7EAF3984F53087C82A3A0
+:10DE4000254B1DD868B46499233EEF8E37D2D60790
+:10DE5000314EA1D23B12F6F94B8F856821D117CBF9
+:10DE600017AA0F65F279AEDA037433518D76ED2976
+:10DE700085F7DD70CC4C5605FC67BCAFF239026704
+:10DE800034EA65FA52470A79ACCCCE4B1E0FCF1B51
+:10DE9000993B29D8C5E76F3FA09089E7B51DB1EE42
+:10DEA0004CE1796DE648B69BF7DD36F03B8B87DBBE
+:10DEB000F6FEF72CAEB958CF4736439E1415FA6DCF
+:10DEC00077F24F17917F60CEFB77313FFF694DF4BA
+:10DED000ED37BD6721D6D7059E8FFD5A0EF6D58248
+:10DEE0006EA5F05627DAFD3CAF48BF9B6FF8DFE523
+:10DEF0005C5786B3387EBEF8395DA2A718BDF869B5
+:10DF00003EF702D68B46EB437659EE21967B716E37
+:10DF1000CE8E2E25719DAE5F8F76694B0ECB159DF3
+:10DF2000A9B81566154D0D6C76421F858AB39717F3
+:10DF3000475F7FB9742DF49B122CBD9DCF17B59010
+:10DF4000DCC7E2C7B69BB40479160F6A1EDC433403
+:10DF5000959A0EC9BD7BA7E23EA8BC61A96712D6FF
+:10DF60008DBE7B2B6F195579BDFDFA7304CA757987
+:10DF7000CEB0A9C97D1B72D7E7E5ED80FED900C4FC
+:10DF80008E4EA9FAFE1E95C7E7C7D7BF689CA74665
+:10DF90002BCE89F0F806C59DE31C679F58BB87F51B
+:10DFA000BE86EFE945BE6FB42F753869CD6CA2FD12
+:10DFB0001DB942FF73874BDA504791F4BFD2E11687
+:10DFC000FA60C72D421FEAF0083DD05127EDD18EEF
+:10DFD00006E93F0351FF8C70A020ECE2147C6D4AEF
+:10DFE0009C1ECE1C434F499E3F9CA924D353149999
+:10DFF000FF70B83C1860FAA532A79C938DCAD1C0B7
+:10E00000FA684E4B2FA10CB4F9414A67BBB17B03B0
+:10E010001EB6FB3FD4EDDA4333C5CF4B30AF3AF3F6
+:10E02000CE46F8DBE52C2B69ACCFC31EEFDF63DEF9
+:10E03000E9D35505DBD13F68735BF9FE8757DC9464
+:10E0400001BD47FF4D238DB7AE285AB0B994E90AF8
+:10E05000BB2276CCFC6E6EC866BBC64FE65335B8A5
+:10E06000BAD4A4E38473B602FDB7AEC13E1B26DB6F
+:10E07000165879FC4AB9F757D827A6F7DA29EB0AD8
+:10E08000BCD08BD9F5BECAF302FF6EA65E9EF780A8
+:10E09000C39D64DF47CB2B82B09BC545B336CF070A
+:10E0A0007F76BAD9BC3FBBF57EC8E751D3944EC149
+:10E0B000319709B810C4FDF33E952E45EC306C71D4
+:10E0C0009932997F38B5222BC0EB4E19F77DDAB81B
+:10E0D000EF33C67DBFC3FDD5DCBECBFD6887B81F5F
+:10E0E000ED8A989E4DA385D05FF0A70D2F7944EF60
+:10E0F000A3F9A0A3665A0E3B5C023FD3F127BF8170
+:10E10000E578A25C97E36E037F866E6BE8D3D785D4
+:10E11000844F8B85BCB0FF4B589F609FB175F1F564
+:10E1200024EDB29B2990C2E7A0C3B620F4445389E2
+:10E13000805FCB0EE7082E6929B38ACF4F647A013E
+:10E14000099ED2AB567D5EAE6B21FC857524FB8C9F
+:10E1500004D58099EDC49F395498C9F28E187E1663
+:10E16000A30FFD4913FCF6CF679ADBD714FD7CFEA5
+:10E1700065438513B05EB1A9B033FF4E7DFCACE1C1
+:10E1800087FE99063FE33C9412CAC77D448F1DCE9B
+:10E19000BF87E92E7B78AD1E07C28582DF142E5C17
+:10E1A000069C5442E7C84DD477FC7DAFE927D047A1
+:10E1B000E879D0FDC77FAFD34ADF3967E2F8A450D2
+:10E1C000BEE204FD8141F73D3FC19D409B5F398721
+:10E1D00071CBA6DF7BAB27336E5883A73B6037FF3D
+:10E1E000A2DB97ED40FF27D05BCB112BC12E2B0F6D
+:10E1F000F47FF60A8FB7F43BDC80FBA86786E8BBA8
+:10E20000F3C8DEC7616F237D66F187AEFDBF7BFE7D
+:10E2100011996725985BBD35544ABCCFD1E37FE3A4
+:10E2200035619FB4D015D06F579C1739EA27EAFEA5
+:10E230003D54F1A93700BDF51FF86BC4B5FA0C0ABF
+:10E24000C06EE965BE4766E47BF5866A2AE171C760
+:10E25000D04AF06F7BC9EA869DFA5ECDA9841F5F24
+:10E26000F3CC14FB6BBEB13B1F71573DBA6FCF238C
+:10E2700059986723C8DB9EC976C47AF5693B16DDD9
+:10E280002FF7B76BCF6F20F73E1BED643ECDCC036D
+:10E29000FB35EF991D0CF0D15EFBFAE395B8871AB8
+:10E2A000EDB93DE8BFB2DBA6420F672D9E8C72F838
+:10E2B000E159B3BB17EB0CBA7978A22E4F5AA4568A
+:10E2C000EE2FAB3B1F71D737F1E1BF80DCF55AF77A
+:10E2D000F3CFE23C7BAD843871611FEB8DD75DE8F5
+:10E2E00035CFC72D8FEC7398602F9794EE95CF8222
+:10E2F0007FAF3EEF92AD5BF419E89D43D88FE711F5
+:10E30000E2F225657B52FF85DEBD255ED6DFC5972F
+:10E31000EA8BBD09F61BF317DF6E6B527C14246089
+:10E320005CF219BFC919203BC7DF6683BC78E89946
+:10E33000916729BEFEE27E73D8C23A6AB6D2E694ED
+:10E34000CCB83FF8F2FEBC0EE7F3A93B0A91C73404
+:10E350002F88AC845F5CB0514A2ECF7BDB885FBED8
+:10E36000831B972A25DF2D4F4D85EEC75773F53850
+:10E370007675C0160C28DF1D8FFEA3839CEFCC8E14
+:10E38000D377AF677E29717E6F5B42AD6EDEB72DAE
+:10E3900053C78F733C7F3FE35895B1CFAA8792E76D
+:10E3A000DF529129F6D3668914220EC6F82FAC8865
+:10E3B000E15AA4107835765D3DD213E0C8CB8AE0EF
+:10E3C00088EFA0F2A1966EA8343BAE4F5F4A20A81A
+:10E3D000958C7F0FB98B8C7B605EEF55E87EE5DB1B
+:10E3E0006FF3D8984F4B6A241D7953AB23928E7CE0
+:10E3F00068E4A8463B8DEBCB8AF19F19DFAF494615
+:10E40000B83F64F6D8C6DB8F8F433C6F1D7EB32ABE
+:10E410003EA9D0FDA669204DF623676411ECB6E94C
+:10E42000B9E47538A733C11F470676657B13E28FC1
+:10E43000CF903BAA7C287E13FDFAA37CD8814FA500
+:10E44000CD0AABF622AFB1650A4D293A1DB0B1E550
+:10E45000FBBEB4A7C27E2E5E6D153F1E5122827395
+:10E46000B927AE0A3E8C982382738ECAFF11FC181E
+:10E4700099105909DCCAADB4AF96F1C991952E1E19
+:10E48000FFB2C2A0A791E40385273257034FEAB534
+:10E49000D1B711376997D9093F89E97B9DA127A297
+:10E4A000C7863B78FC0F41B30BF1614EA562E40BCC
+:10E4B00096F8F9B5B83F8D90EBC041F86793DDDD74
+:10E4C0002BA3C1FDAF201FBC33DBDDE5BA5E6F328D
+:10E4D00087E5CACAFC6A2DEE293BDDFB8F15CCDF30
+:10E4E0005F1CC907CEB1B54B1C6A7BDDBA13FB4775
+:10E4F000CDA37B805F171CDE272B589FAD96A1AD67
+:10E50000A52CD267E6C829A4F84B606F8223BABD58
+:10E510008D14EFB2089F1E562AEB6797710F944B2C
+:10E52000B403F6A1E8F7FCE6C0ABEF006F468666E1
+:10E53000094E8FF5A70B034FA603373EE0F81E9850
+:10E5400013EFFF60F55E0BFA97BFB8C312E1F69EBA
+:10E55000CDC9E7BB7CEDF60CF80B3D9ED00F7BECF4
+:10E5600049A6C7EA0576194EF28380E8FD9CC729C3
+:10E57000F2B7540EB5410FDFD2CB98D612E8136331
+:10E58000E831F3A941CF1FCE7948F8B64E0B0F43BF
+:10E590006F2307CC047CEFE4B826747F5A10EF1A7F
+:10E5A000F500C7AD2C3D6E215EB4A40FADC4BD8C8B
+:10E5B000F45B9D98BFE9C8A7F9383FDB633ECEDB2B
+:10E5C00072E47036C1CE8DF704C7C76C8CB7F41FE8
+:10E5D000C9C6BB24D6DFAA860A211747B812E0476E
+:10E5E000ACDFAF850B217F8B325482F128E496F9A2
+:10E5F0004C6BA049CED1AAE87E4F4734C1F9B1F7A0
+:10E60000F651856EAF8C0F25C807371DBD5412B16A
+:10E61000C7F1A0D9C09513E82FD6FDDFB9C8C0094E
+:10E620005EDA0CBF1F0727BC31DCA3F516C87DAE30
+:10E6300042973BB65EF8CA3B2320E36DAF5D2A9953
+:10E64000598C75C63C4AC0A359717C010EE40A0E70
+:10E650006C3267F3B97CCF2BEE4E5ED2DCB8B1964C
+:10E66000A7D33AD3FDB5D06B1305E45D3756AEB1F1
+:10E6700076F470857EBF3E557F8FFBF628C14E969F
+:10E68000EB22637DEE7CC19B30F0675DF5C65AF8E6
+:10E69000DF7D597E4BE2BBF987F8AFED49A6D7ADD8
+:10E6A000DF589B338E9FFB1EDA7E6A125DCFAFD997
+:10E6B000BBA336DB757D7F4CEE8BB6989C95E64907
+:10E6C00089FA58BEB17612B7EB52FEAFFAD0CF7DC1
+:10E6D000F188358CB8CBFAB5E0FCB7FD71BD2509E2
+:10E6E000B77F805F33056B9D33BE5BFEB16DAB12B0
+:10E6F0001E56804FEC5FBDE267EC3709FB6DAA1830
+:10E7000053A7685A3D1D793779574F4FAC538C6DDD
+:10E710001928A7A8B788BD49CB7EB8D23D8E3E62E6
+:10E72000F36FAED4649F4D861D4FA96F79E6151E19
+:10E730007FB9CC5356C97E55AEA992BF8FDDA7A62F
+:10E7400052CF0F86B21DBF803D4507CD4EF849B967
+:10E75000A6EB334FBDFC2EFC312FDBE1EA647E35A6
+:10E760005569FABC633627EA40D1635FE57BE0FF79
+:10E770005BECCBA5CE62B2D3641E3F953B57F03D18
+:10E78000B6CFC7C63E69A57ABED35E64FEFE3A53D5
+:10E79000B1E3DB3A93E41BC569C1D91287BF90F896
+:10E7A000161D5CE8D45CC0F7A01DFED6FEF57F67A1
+:10E7B000230E8F0CFE67BA0BB875EDD374D8CFB6A5
+:10E7C000818FD3810F27066639D09E1D7239D01FE5
+:10E7D000ADFBB816F3BA8C365E67308B9CB136F65B
+:10E7E0007E8ED51312DED1CDD06BAF73DB2F4B6194
+:10E7F000EFA9DD8263FC8ECE44FC88D7195C39E337
+:10E80000D56512EB0C05B3F53A035AD4190ACC7A44
+:10E810009D0134EA0C685167403FEA0CA051670043
+:10E820008D3A0368D419D0A2CE80FE2BA86BB1BC60
+:10E83000514EDE50DFAAD1EC82FF0FF46A41E4F5BD
+:10E840000F1CD3747A8712C47D7FC6FB230E46AF9C
+:10E85000E875B028C75379E71F34CBFB201ADA5E7E
+:10E860003713F7D6AFB97155171137D914DBCDA3CC
+:10E8700027511F6AEF53DC1B5DE85F2E726C1B5C37
+:10E88000F87E23FA7BCD6ED585FBBA9A8DFA976F09
+:10E89000B057EA58D539C72C72CFFB15CAE1FDEF46
+:10E8A000B0EAEF64BFC6BD2CF7B045953CDA6F1DEA
+:10E8B00092F74BCB8B8A734D421EDA7ECBE78213E5
+:10E8C0009DB6F49D90D71FB239D724C5578FE47DEC
+:10E8D0007EFC74C18D3C43454CAFD5A790DF5E7B79
+:10E8E000013821F948427EB4D6D9FC33E467A45DEF
+:10E8F00033E1FC7E7EE84E64F9D63D6DFE2892B091
+:10E900007F733099F60DF66DCD23C899DC8F4A03DD
+:10E91000E2B23F94DC1FAA74647D92C63FE6D13C0C
+:10E92000E45B75FFB4E6403FEF77B9DB2AF9CA61D3
+:10E930008FF77025FBF149B347EA2F278FD9E4BD44
+:10E94000757EFB9CA4FA4B8D3655EA1F1BCC8AC4FE
+:10E95000F12BE5DE63B0CBAABA7BA5EE5295EB10A6
+:10E960007F8ED9E1D1F28637C077C35C97D4BF6A76
+:10E97000ACF40BE1C77E2FF73C68167FABE95482FD
+:10E980002AD3ABC96D817FAD62758A3D99ED8F2920
+:10E99000EC0FAB78AFC604BBDAB05D91BC420A1095
+:10E9A000ACE795863E570DFEEB570AFBCBBD563DB7
+:10E9B0000FCE5355E19FD7C5718BE7DF475E0BFC48
+:10E9C000661DC755B41C675F8F70BF376D6ABE9EEA
+:10E9D000E7BB72C07FF51933014F6A727E5EE8951E
+:10E9E000785FEDFC84EF5B09DFA57D73D3F7E1A8C9
+:10E9F000893E49C86B4F9A75FC617DCA7BEB14EC6C
+:10EA000055EA3E5E69CF743449BBA28CC4FF0B3417
+:10EA10003D6F2FE0BB72664ADDA20FEB6BDAED6E45
+:10EA2000E83F860BBB8DFCBE40E596E7ED4ED55B1F
+:10EA30000BD329DC3F8D5BCA147E61E77CD4715C0B
+:10EA4000C23F4F3DBBC0057D7C6977431F3539C749
+:10EA5000E6E1DD31CBE0FF7259C355DC97279D021B
+:10EA6000D89F8F43DDACDF5A1C48415D3DE4D15057
+:10EA7000273FA638F1AEBF1E4FB76F71C2CF0A1441
+:10EA800027EAB7B5A9DD35D9CCBF76E60C37F09CBF
+:10EA9000F155EA6123DCEA76706B5053F4B5A66C4D
+:10EAA000D4F30DFF29F7A6544D8AF7D71B7E141D0A
+:10EAB000FC221DF1F547D46D77837F806CEE5E8379
+:10EAC0003FECA0FEA66952BF8DD9D1E5FD393B616F
+:10EAD0004753ABF4758D8DEF99914F0CDDE6CDC1A9
+:10EAE000FE2BD77CBE255BCE397EBD8C713703B83B
+:10EAF0003BB65E16C3F13D46FD1D786B32EABA2681
+:10EB0000A3AE6B32EABA26A3AE6B32EABA26A3AE44
+:10EB10006B32EABA26A3AE6B32EABA26A913AE97D5
+:10EB2000F6DD8E87A41DEA08C87842BCB8B9EAC7EA
+:10EB3000D55D17558D5377A5145786C45DF67BBDFB
+:10EB4000DE3DA6CECAFEAE26F87BD5E0847B1E4312
+:10EB50005ED26371B338546BF1163C60177CF0548D
+:10EB60008D5B6F8DE9CF2EF5D9CB649B8F7BA82C65
+:10EB70009A655251C734EE2356EF84DFE09CF01BB8
+:10EB8000B4F01BD3ECB8DFFCD6C2AE5DAAE7090136
+:10EB9000C9136C72BF5B3732AE307D2F399370E58D
+:10EBA000B331B8C20F9A159063EDA095BA743F23A4
+:10EBB000F84F25377F9C3F0ECE84749C99961ADAC5
+:10EBC000877DA6B5A5BA9117B3BF8B9D9DDCA6889E
+:10EBD000BFAFA106D9771CBC49479E7CEFC4D17357
+:10EBE000BFE1F9F7FE835DF29DAD93D72EFAFFE00A
+:10EBF0004D4D95AE8F5F77847DE75996EA54B643C5
+:10EC00008E57D5162A92BAB89A2AFE50A33DAE580E
+:10EC100080A377D33CDC77B5B5E139C899C3FE2E24
+:10EC2000EFDF2CA3BE6B1A6ADECBF4D9EC3C37BE07
+:10EC3000AB4DCD3D44050B804775C5B0ABB3D4ADEE
+:10EC400060DD6319DEBF83BFDC5ECCA756E3FE96B2
+:10EC50005397B6B34BEE63CE42DCFB32ABAB1FF542
+:10EC6000862D6F9E907AC2B20CD742D41BB6BC7967
+:10EC70005AA7735CFD8A1BE5B213ABAB7F82F866C3
+:10EC8000EB3E9F1067FDA1094974FBC0E4EEF30958
+:10EC900071AE053FF89D4E3F534CB8AF5643945C60
+:10ECA000D5BB1DF2F9EBFE4B7FCFD3A8C4C9A7AAF1
+:10ECB000745C9C7482C2B0E7D1C50EF9FE973371C3
+:10ECC000FD3CD4DBA8D8B510F338AFFD35ECF8E245
+:10ECD000AD9EA7C127CF38770EF1793558C7900D73
+:10ECE000ED19E3BBE429D5DB88B6363D60927E356D
+:10ECF000588AF66D35F420FAD92F76814FED93F3CB
+:10ED00006E2C623ACF1A9AB7DE8E78E9D98DFE73EF
+:10ED1000659E5EEC37B6EEDF699C8FE5D98779C3D7
+:10ED200085AAE4F9C337EA6DCC2EC2553A0E1D37D9
+:10ED3000FCA8AC93E4FBE758FB395EA51A78F9FD13
+:10ED400072B3BC47204F4C7EEA5E5D0A7958DEA361
+:10ED500086BCAF619CEC99528FF96E7B0DC87EC763
+:10ED60000D3B657C6C39AFE3A3B485A6E004E40DEC
+:10ED7000531E0D4E80BC53768CDA5CDCBE1018B589
+:10ED8000217F78E16F476DE87FC14375E3E1BF56AE
+:10ED9000AD09DFC2B251593F9DF71A9277C2E8041C
+:10EDA000E46F854D6F59026CB7739EE67D93F2B7A1
+:10EDB000228963D30D5B9AFEA84AB087E9CF90E41D
+:10EDC000AB549D25E3BE14DDFF7D8F3EA8C28E6E41
+:10EDD00008B2DC09F637E769D3E54812DFB0AC6B5F
+:10EDE000317083F3B5A4713F3347BE3CC5C023E403
+:10EDF0008F8D8C37FEA6B7BE42BEC879DC187E8CDC
+:10EE00004D311C26C45DEFEB1117FC2079DEDABB17
+:10EE10001ED98AF76D53E3768BBC8FD7F46D45DB33
+:10EE2000DAFA9E258724BF4C9ACFF965127D9D9C06
+:10EE300063E4687BF0F3AD39E3ECCB76702DD10E53
+:10EE40004E9A4337E0BD7AD29FEA0E481C09DD0F87
+:10EE50007CD9D96A7723AEECFA55A5D8D7B7F5A9EE
+:10EE6000328FA9FA47D951A7CC0F545211FCE6872B
+:10EE7000DA11E0E1EC243C0C48DD72894370AEDD30
+:10EE80007807B6AD714A3E12F3EB3653E8C3AD983E
+:10EE900097E590EF110CB745A62C7C6F9AE2EE4AED
+:10EEA000C82BCE2E9915049DDD190A83EFE8CF15E6
+:10EEB00037EAC8D5693AAED6A80DAD7B79FC2D35B9
+:10EEC0002CB8F15BE007F36FB7AC977645D94CB13E
+:10EED000DB5C0A29FAFF67702DC47B3DF63DAD6708
+:10EEE0005BB0EF20DEFB4AF099B5A88FFE955DE49C
+:10EEF0008906D58099CFD3338104B77BEE2C94B8A3
+:10EF000013A586C6FB91FF2C4F953A6ACF04D71301
+:10EF1000F86EDAD37CA3E4F587FEA4C7FBD1A5295C
+:10EF20006EE4713DF35C1B71AE9E475D32FE9AA2AA
+:10EF3000F30B3CA1EBA767A97ECE9EE64C799FC55B
+:10EF4000EEA167876732BEBF5932BCE5D5A803186A
+:10EF5000DF1F7B66703FB74F290D77DE073E737565
+:10EF6000795794B9E4DE4EDE79E3137B747D86F144
+:10EF70001DAC7D8923E9FDFEBFFE80CBB3202200BE
+:10EF80000000000000000000040835000000000040
+:00000001FF
diff --git a/firmware/cis/3CCFEM556.cis.ihex b/firmware/cis/3CCFEM556.cis.ihex
new file mode 100644
index 00000000000..e4d92b173e1
--- /dev/null
+++ b/firmware/cis/3CCFEM556.cis.ihex
@@ -0,0 +1,13 @@
+:1000000001030000FF152D050033436F6D004D65A2
+:100010006761686572747A2033434346454D3535D0
+:1000200036004C414E202B2035366B204D6F6465D9
+:100030006D0000FF20040101560521020000060B9F
+:1000400002004D000000006B000000FF001303439E
+:100050004953210206001A060507001067021B0912
+:1000600087011901556430FFFFFF00130343495313
+:10007000210202001A060527001177021B09A701B9
+:090080001901552330FFFFFF00B8
+:00000001FF
+#
+# This card is MFC-compliant, but identifies itself as single function
+#
diff --git a/firmware/cis/3CXEM556.cis.ihex b/firmware/cis/3CXEM556.cis.ihex
new file mode 100644
index 00000000000..895010b230f
--- /dev/null
+++ b/firmware/cis/3CXEM556.cis.ihex
@@ -0,0 +1,13 @@
+:1000000001030000FF152C050033436F6D004D65A3
+:100010006761686572747A20334358454D353536CB
+:10002000004C414E202B2035366B204D6F64656DA2
+:100030000000FF20040101350021020000060B0230
+:10004000004C0000000069000000FF00130343495A
+:1000500053210206001A0501070008631B098701E6
+:100060001901556430FFFFFF001303434953210278
+:1000700002001A0501270009631B09A70119015590
+:060080002330FFFFFF002A
+:00000001FF
+#
+# This card is MFC-compliant, but identifies itself as single function
+#
diff --git a/firmware/cxgb3/t3fw-7.1.0.bin.ihex b/firmware/cxgb3/t3fw-7.1.0.bin.ihex
deleted file mode 100644
index 1042f755f68..00000000000
--- a/firmware/cxgb3/t3fw-7.1.0.bin.ihex
+++ /dev/null
@@ -1,1885 +0,0 @@
-:1000000060007400200380002003700000001000D6
-:1000100000002000E100028400070000E1000288E7
-:1000200000010000E0000000E00000A0010000006E
-:1000300044444440E3000183200200002001E0002A
-:100040002001FF101FFFD0001FFFC000E300043C91
-:1000500002000000200069881FFFC290200069D0C4
-:100060001FFFC29420006A101FFFC29820006A84FC
-:100070001FFFC29C200003C0C00000E43100EA3131
-:1000800000A13100A03103020002ED306E2A05000C
-:10009000ED3100020002160012FFDBC03014FFDA5F
-:1000A000D30FD30FD30F03431F244C107249F0D347
-:1000B0000FD30FD30F12FFD5230A00240A00D30F4A
-:1000C000D30FD30F03431F244C107249F0D30FD327
-:1000D0000FD30F14FFCE03421F14FFCB03421F1296
-:1000E000FFCCC0302D37302D37342D37382D373CED
-:1000F000233D017233ED00020012FFC4C0302F37E0
-:10010000002F37102F37202F3730233D017233ED6A
-:1001100000020012FFBEC0302737002737102737F4
-:1001200020273730233D017233ED03020012FFB95F
-:1001300013FFBA0C0200932012FFB913FFB90C028F
-:1001400000932012FFB8C0319320822012FFB71312
-:10015000FFB7932012FFB715FFB316FFB6C030D715
-:100160002005660160001B00000000000000000088
-:10017000043605000200D30FD30F05330C6E3B1479
-:100180000747140704437631E604360505330C6F40
-:100190003BED00020012FFA615FFA3230A00D720A3
-:1001A000070443043E0505330C0747146F3BF00377
-:1001B000020012FFA1C03014FFA1D30FD30FD30F41
-:1001C0009340B4447249F2D30FD30FD30F14FF9B63
-:1001D000834014FF9B834012FF9B230A0014FF9A65
-:1001E000D30FD30FD30F9340B4447249F2D30FD33C
-:1001F0000FD30F14FF95834012FF95C92F832084DE
-:10020000218522BC22743B0F8650B4559630B433FE
-:100210007433F463FFE60000653FE1655FDE12FFC3
-:100220007C230A0028374028374428374828374C91
-:10023000233D017233ED03020000020012FF7AC079
-:1002400032032E0503020012FF7813FF819320C0B2
-:1002500011014931004831010200C00014FF7E0441
-:10026000D23115FF7D945014FF7D04D33115FF7CEE
-:10027000945014FF7C04D43115FF7C24560014FFE5
-:100280007B04D53115FF7B24560010FF7A03000054
-:10029000000000000000000000000000000000005E
-:1002A000000000000000000000000000000000004E
-:1002B000000000000000000000000000000000003E
-:1002C000000000000000000000000000000000002E
-:1002D000000000000000000000000000000000001E
-:1002E000000000000000000000000000000000000E
-:1002F00000000000000000000000000000000000FE
-:1003000000000000000000000000000000000000ED
-:1003100000000000000000000000000000000000DD
-:1003200000000000000000000000000000000000CD
-:1003300000000000000000000000000000000000BD
-:1003400000000000000000000000000000000000AD
-:10035000000000000000000000000000000000009D
-:10036000000000000000000000000000000000008D
-:10037000000000000000000000000000000000007D
-:10038000000000000000000000000000000000006D
-:10039000000000000000000000000000000000005D
-:1003A000000000000000000000000000000000004D
-:1003B000000000000000000000000000000000003D
-:1003C000000000000000000000000000000000002D
-:1003D000000000000000000000000000000000001D
-:1003E000000000000000000000000000000000000D
-:1003F00000000000000000000000000000000000FD
-:1004000000000000000000000000000000000000EC
-:1004100000000000000000000000000000000000DC
-:1004200063FFFC000000000000000000000000006E
-:100430000000000000000000000000001FFC0000A1
-:100440001FFC0000E30005C81FFC00001FFC0000AB
-:10045000E30005C81FFC00001FFC0000E30005C806
-:100460001FFFC0001FFFC000E30005C81FFFC00042
-:100470001FFFC018E30005C81FFFC0181FFFC018EA
-:10048000E30005E01FFFC0181FFFC28CE30005E07A
-:100490001FFFC28C1FFFC28CE30008541FFFC290D5
-:1004A0001FFFC58CE3000854200000002000016AF3
-:1004B000E3000B502000018020000180E3000CBC11
-:1004C0002000020020000203E3000CBC2000021CFC
-:1004D00020000220E3000CC02000022020000226A1
-:1004E000E3000CC42000023C20000240E3000CCCDE
-:1004F0002000024020000249E3000CD02000024C02
-:1005000020000250E3000CDC2000025020000259C1
-:10051000E3000CE02000025C20000260E3000CEC31
-:100520002000026020000269E3000CF02000026C51
-:1005300020000270E3000CFC200002702000027911
-:10054000E3000D002000028C2000028CE3000D0C63
-:100550002000029020000293E3000D0C200002AC6A
-:10056000200002B0E3000D10200002D0200002F2B3
-:10057000E3000D14200003B0200003B0E3000D38A9
-:10058000200003B0200003B0E3000D38200003B0CA
-:10059000200003B0E3000D38200003B0200003B0BA
-:1005A000E3000D38200003B020006BA8E3000D38F5
-:1005B00020006BA820006BA8E3007530000000004D
-:1005C00000000000000000001FFC00001FFC0000F5
-:1005D0001FFFC5901FFFC67020006BA820006BA8EE
-:1005E000DEFFFE000000080CDEADBEEF1FFFC2A064
-:1005F0001FFCFE001FFFC0941FFFC5C0300000009D
-:10060000003FFFFF8040000010000000080FFFFFC8
-:100610001FFFC26D000FFFFF804FFFFF8000000033
-:1006200000000880B000000560500000600000007D
-:1006300040000011350000004100000010000001E2
-:1006400020000000000010007FFFFFFF40000000BE
-:1006500005000000800000190400000000000800F0
-:1006600010000005806000007000000020000009FC
-:10067000001FF8008000001EA0000000F80000002D
-:1006800007FFFFFF080000001800000001008001C4
-:10069000420000001FFFC21D1FFFC0DC00010080E0
-:1006A000604000001A0000000C0000000000300054
-:1006B000600008008000001C000100008000001A9B
-:1006C00080000018FC0000008000000100004000D5
-:1006D000030000008000040050000003FFFFBFFF84
-:1006E0001FFFC3D400000FFFFFFFF000000016D073
-:1006F0000000FFF7A50000001FFFC4B01FFFC4618A
-:100700000001000800000B20202FFF801FFFC455B0
-:1007100000002C00FFFEFFF800FFFFFF1FFFC57861
-:1007200000002000FFFFDFFF0000FFEF01001100CD
-:100730001FFFC3D21FFFC590FFFFEFFF0000FFFBAD
-:100740001FFFC6301FFFBEA0FFFFF7FF1FFFC064E3
-:100750000000FFFD1FFFC6200001FBD01FFFC5B03A
-:100760001FFFC6601FFFC591E0FFFE001FFFC5A071
-:10077000000080001FFFC53C1FFFC5B41FFFC068FD
-:100780001FFFC4D01FFCFFD800010081E10006005C
-:10079000000027101FFCFE301FFCFE70E10002006D
-:1007A0001FFFC5381FFFC5500003D0901FFFC56451
-:1007B0002B5063802B5079802B5090802B50A6803B
-:1007C0001FFFC4690100110F202FFE0020300080A0
-:1007D000202FFF000000FFFF0001FFF82B50B200A8
-:1007E0002B50B208000100102B50B1802B50B2806A
-:1007F0002B50BA00000100112B50BD282B50BC809B
-:100800002B50BDA020300000DFFFFE005000000292
-:1008100000C0000002000000FFFFF7F41FFFC06CE3
-:10082000000FF80004400000001000000C40000021
-:100830001C400000E00000A01FFFC5401FFD000895
-:100840001FFFC5541FFFC5681FFFC57CE100069050
-:10085000E10006EC000000000000000000000000C5
-:100860000000000001000000000000000000000087
-:100870000000000020100040201000402010004028
-:1008800020140080200C0000200C0000200C000030
-:1008900020100040201400802014008020140080CC
-:1008A000201800C0201C0100201C0100201C010099
-:1008B00020200140201800C0201800C0201800C0CF
-:1008C000201C0100201800C0201800C0201800C003
-:1008D000201C010020200140202001402020014058
-:1008E00020200940202009402020094020200940E4
-:1008F00020240980FFFFFFFFFFFFFFFFFFFFFFFF37
-:1009000000000000000000000000000000000000E7
-:1009100000000000200052FC200051CC200052FCBE
-:10092000200052FC200051082000510820005108EE
-:1009300020004F4820004F4820004F4020004EAC80
-:1009400020004D5420004B342000490800000000D6
-:1009500000000000200052CC200051982000523CA2
-:100960002000523C20004FF020004FF020004FF0BC
-:1009700020004FF020004FF020004F3820004FF0B3
-:1009800020004C7420004AE4200048B4000000001D
-:100990000000000020000BE0200038BC200004C054
-:1009A000200044A820000BD820003FB4200003F012
-:1009B000200044682000489020003CC420003BE018
-:1009C00020003838200036C42000343420002F9412
-:1009D00020003A3C20002BF4200028282000653419
-:1009E000200023B4200020942000204020001D2C53
-:1009F000200018402000157020000DEC20000C2471
-:100A00002000113420001320200041AC20003C784D
-:100A100020000BE8200004C00000000000000000DF
-:100A200000000000000000000000000000000000C6
-:100A300000000000000000000000000000000000B6
-:100A400000000000000000000000000000000000A6
-:100A50000000000000000000000000000000000096
-:100A60000000000000000000000000000000000086
-:100A70000000000000000000000000000000000076
-:100A80000000000000000000000000000000000066
-:100A900000000000000000003264000000000000C0
-:100AA0003264000064006400640064006400640058
-:100AB000640064000000000000000000000000006E
-:100AC0000000000000000000000000000000000026
-:100AD0000000000000000000000000000000000016
-:100AE0000000000000000000000000000000000006
-:100AF00000000000000000000000000000001000E6
-:100B000000000000000000000000000000000000E5
-:100B100000000000000010000000000000000000C5
-:100B200000000000000000000043238000000000DF
-:100B300000000000000000000000000000000000B5
-:100B400000000000000000000000000000000000A5
-:100B5000005C94015D94025E94035F940043000086
-:100B60000000000000000000000000000000000085
-:100B70000000000000000000000000000000000075
-:100B80000000000000000000000000000000000065
-:100B9000005C90015D90025E90035F900053000046
-:100BA0000000000000000000000000000000000045
-:100BB0000000000000000000000000000000000035
-:100BC0000000000000000000000000000000000025
-:100BD000009C94001D90019D94029E94039F940498
-:100BE0000894050994060A94070B9400430000003A
-:100BF00000000000000000000000000000000000F5
-:100C000000000000000000000000000000000000E4
-:100C1000009C90019D90029E90071D90039F900460
-:100C20007890057990067A90077B90005300000039
-:100C300000000000000000000000000000000000B4
-:100C400000000000000000000000000000000000A4
-:100C500000DC94001D9001DD9402DE9403DF940417
-:100C60000494050594060694070794080894090956
-:100C7000940A0A940B0B940043000000000000004B
-:100C80000000000000000000000000000000000064
-:100C900000DC9001DD9002DE900B1D9003DF9004DC
-:100CA000B49005B59006B69007B79008B89009B90A
-:100CB000900ABA900BBB90005300000063FFFC0049
-:100CC0002000696410FFFF0A00000000200069880E
-:100CD00000D23110FFFE0A0000000000200069D0A1
-:100CE00000D33110FFFE0A000000000020006A104F
-:100CF00000D43110FFFE0A000000000020006A84CA
-:100D000000D53110FFFE0A000000000063FFFC0068
-:100D1000E00000A012FFF78220028257C82163FF83
-:100D2000FC12FFF303E83004EE3005C0309320944A
-:100D300021952263FFFC00001FFFD000000400206B
-:100D40001FFFC5901FFFC670200A0011FFFB13FF95
-:100D5000FB03E63101020016FFFA17FFFAD30F7703
-:100D60006B069060B4667763F85415505419E60F1B
-:100D7000140063FFF90000006C1004C020D10F00C4
-:100D80006C1004C0C71AEF06D830BC2BD720857270
-:100D90000D4211837105450B957202330C237601C8
-:100DA0007B3B04233D089371A32D12EEFE19EEFE4A
-:100DB000A2767D632C2E0A00088202280A01038E87
-:100DC000380E0E42C8EE29A67E6D4A050020880026
-:100DD000308C8271D10FC0F0028F387FC0EA63FF80
-:100DE000E400C0F1C050037E0CA2EE0E3D1208825A
-:100DF0000203F538050542CB5729A67E2FDC100FDC
-:100E00004F366DFA0500208800308CBC75C0300864
-:100E1000E208280A01058338030342C93E29A67E59
-:100E20000D480CD30F6D8A0500208800B08C8271AC
-:100E3000D10FC05008F53875C0C163FFBBC0600258
-:100E4000863876C0DA63FFD46C101216EED8C1F87B
-:100E5000C1E72B221E2C221DC0D07BC12F292006CA
-:100E6000D7B0299CFACC57282070288CFF282470F2
-:100E700064915C2AB0000EA80C6481670FA90C6411
-:100E800092B3C1E97EA13969AC2F600036292006F2
-:100E9000D7D0299CFACC57282070288CFF282470A2
-:100EA0006491352AD0000EA80C6481640FA90C64EB
-:100EB000931BC1E97EA10968AC09C020D10F0000D5
-:100EC000002D25028A32C0900A6F5065F5AD2924A5
-:100ED000670908476585A92F200C18EEB50CFE118F
-:100EE000A8EE28E286B44978930260057A19EEB13B
-:100EF00009F90A2992A3689007882009880C65855A
-:100F00006627E28564756065558E7BC104D9B06043
-:100F10000001C0908B941CEEA80B88148CC40B0BA2
-:100F200047A8CC18EEA609BB1008CC029C7018EE9E
-:100F3000A41CEEA508A8010B88020C4C021BEEA114
-:100F40009C710B880298722C90232B902204C8105D
-:100F500006BB100C4C1208BB0228902107CC100CC9
-:100F600088100C88020B88021CEE998B330CBB0195
-:100F70008C340B880298739C999C748B958C399B4C
-:100F80007588968B38987688979C799B7898771C8B
-:100F9000EE9028E2850CFC082DC4CF08480B28E60B
-:100FA0008565550B2B221E2D221D7BD9022B0A0095
-:100FB00064BF062CB00728B000DA2006880A288211
-:100FC0004CC0D10B8000DBA065AFE763FEEB0000F7
-:100FD000292070659E9C6004E42A207065AEC36081
-:100FE00004DB00002EB0032C2067D4E065C1058A25
-:100FF000328C330AFF500C4554BC5564F4E619EEAC
-:1010000075882A09A90109880C64821BC0926000B6
-:10101000DD2ED0032A2067D4E065A0D88A328B3336
-:101020000AFC500B4554BC5564C4B919EE6A882AB1
-:1010300009A9017989D50BEA5064A4DD0CEE11C031
-:10104000F02F16132E16168AE78CE82A16128EE950
-:10105000DFC0AAEA7EAB01B1CF0BA85065834288FE
-:1010600037DBC0AE89991E789B022BCC012B161B57
-:1010700029120E2B0A0029161A7FC3077FC9027E88
-:10108000AB01C0B165B4988B352F0A002A0A007AEB
-:10109000C30564C3C72F0A0165F4842B12162B16EF
-:1010A00019005104C0C100CC1A2CCCFF2C16170C0F
-:1010B000FC132C16182B121A2A121BDC505818FA83
-:1010C000C0D0C0902E5CF42C12172812182F121BBF
-:1010D0002A121A08FF010CAA018834074C0AAB8BAC
-:1010E0002812192BC6162F86082A86092E74102955
-:1010F00024672E70038975B1EA2A7403B0990949EF
-:101100000C659DB52B20672D250265B3F42B221E9F
-:101110002C221D7BC901C0B064BD9E2CB00728B035
-:1011200000DA2006880A28824CC0D10B8000DBA0A0
-:1011300065AFE763FD8389BAB19965909788341CE0
-:10114000EE2698BA8F331EEE1F0F4F542FB42C8DFE
-:101150002A8A320EDD020CAC017DC9660A49516F44
-:1011600092608A3375A65B2CB0130AED510DCD0148
-:101170000D0D410C0C417DC9492EB012B0EE65E356
-:10118000C2C0D08E378CB88A368FB97CA3077AC993
-:10119000027EFB01C0D1CED988350AAD020E8E0881
-:1011A00078EB022DAC0189B7DAC0AF9B79BB01B1F6
-:1011B000CADCB0C0B07DA3077AD9027CEB01C0B114
-:1011C00064B15DC091292467C020D10F00008ADA84
-:1011D000B1AA64A0BC2E20672D250265E30B1FED8C
-:1011E000F98A3218EDFE0FAF0108FF0C65F2860A8E
-:1011F00048516F820260027DC090292467090A4726
-:1012000065A2F27BC901C0B064BCAE2CB00728B0A7
-:1012100000DA2006880A28824CC0D10B8000DBA0AF
-:1012200065AFE763FC9300000CE9506492EB0CEFB0
-:1012300011C080281611AFBF2F16198EF88BF7DA60
-:10124000E08FF92B1610ABFB7FBB01B1EA0CA85065
-:101250006580D68837DCE0AF89991C789B022CEC3E
-:10126000012C161B29120C2C0A0029161A7AE307E6
-:101270007AE9027FBB01C0C165C2A48B352C0A008C
-:101280002A0A007AE30564E1CA2C0A0164CE1160DF
-:10129000028D88341BEDD198DA8F331EEDCA0F4FC3
-:1012A000542FD42C8C2A8A320ECC020BAB010CBBEF
-:1012B0000C65BF0E0A49516E920263FF058A330A1C
-:1012C000AB5064BEFD2CD0130AEE510ECE010E0EB3
-:1012D000410C0C410ECC0C65CEE82FD012B0FF654E
-:1012E000F26EC0B08E378CD88A362FD2097CA30715
-:1012F0007AC9027EFB01C0B165BEC78835DBA0AEEE
-:101300008E78EB01B1AB89D7DAC0AF9D79DB01B143
-:10131000CAC0C07BA3077AB9027DEB01C0C165CE0C
-:10132000A1C090292467C020D10F88378C3698142B
-:101330000CE90C29161408F80C981D78FB072812E4
-:1013400014B088281614891D9F159B16C0F02B1207
-:101350001429161A2B161B8B147AE30B7AE90688CC
-:10136000158E1678EB01C0F165F1B929121A2F120A
-:10137000118A352E121B9A1AAFEE2F1210C0A0AF91
-:101380009F79FB01B1EE9F11881AC0F098107AE3A3
-:101390000A7EA9052A12017A8B01C0F164F08160EE
-:1013A000018289368B3799170BE80C981F09C90CF5
-:1013B00029161578EB07281215B088281615D9C0FC
-:1013C0009A199E188A1F2E12152A161A2E161BDA23
-:1013D000C0C0E08C177F930B7FA90688188F1978FF
-:1013E000FB01C0E165E13D29121A2F12138A352E47
-:1013F000121B9A1BAFEE2F1212C0A0AF9F79FB01F8
-:10140000B1EE9F13881BC0F098127AE30A7EA905FB
-:101410002A12037A8B01C0F165F1092E12162E16DD
-:10142000192A121B005104C0E100EE1AB0EE2E166C
-:10143000170EFF132F16180FCC01ACAA2F121A0E7D
-:10144000BC01ACFC7FCB01B1AA2A161B2C161A6377
-:10145000FC6200007FB30263FE3163FE2B7EB302A9
-:1014600063FC3463FC2E00006450C0DA20DBF058CB
-:1014700015DEC020D10FC09163FD7E00C09163FADC
-:101480004CDA20DB70C0D12E0A80C09A2924682C47
-:1014900070075814CED2A0D10F034C0B18ED51DBBE
-:1014A000C0A82878C3022BCDF8D9B063FA65000034
-:1014B0002A2C74DB40580E5063FAE80000002D25FA
-:1014C000027BC901C0B064B0172CB00728B000DAA5
-:1014D0002006880A28824CC0D10B8000DBA065AFB3
-:1014E000E7C020D10FC09163FC04022A02580250C9
-:1014F0000AA202060000022A0258024D0AA20206AF
-:101500000000DB70DA20C0D12E0A80C09E2924683A
-:101510002C70075814AEC020D10FC09463FBCF00CD
-:10152000C09663FBC9C09663FBC400002A2C74DB21
-:1015300030DC405BFE13DBA0C2A02AB4002F200CDD
-:1015400063FF27008D358CB77DCB0263FDD263FC32
-:10155000718F358ED77FEB0263FDC563FC6400009D
-:101560006C1004C020D10F006C1004C020D10F00FB
-:101570006C10042B221E28221DC0A0C09429240612
-:101580002A25027B8901DBA0C9B913ED08DA2028DE
-:10159000B0002CB00703880A28824CC0D10B800011
-:1015A000DBA065AFE7C020D10F0000006C1004295C
-:1015B00020062A2102689805289CF965811A0A0AE2
-:1015C0004C65A0F016ECFB2B629E1AECF86FB8028B
-:1015D0006000F12AA22668A0078B200ABB0C65B028
-:1015E000E32A629D64A0DD2B200C0CBC11A6CC2D3F
-:1015F000C2866FD9026000D71DECEF0DBD0A2DD257
-:10160000A368D0078E200DEE0C65E0C327C285C00D
-:10161000E06470BB1DECF468434D1CECF38A2B0CAA
-:10162000AA029A7089200899110D99029971882A45
-:1016300098748F329F75282104088811987718ECC8
-:10164000E40CBF11A6FF2DF285A8B82E84CF2DDCA7
-:10165000282DF685C85A2A2C74DB40580DE7D2A0F5
-:10166000D10FC020D10F00002C9CF964C08D2C201C
-:10167000668931B1CC0C0C472C24666FC669709E0C
-:101680006618ECDA89308F2B0989400B991009FF15
-:101690000208FF029F708C2008CC110DCC029C71B7
-:1016A0008A339A7389329972882A98748F349F7515
-:1016B00063FF820000CC57DA20DB30DC405814B8DE
-:1016C000C020D10F00DA20C0B658154763FFE500EF
-:1016D000DA2058154563FFDC00DA20DB30DC40DD22
-:1016E000505815C7D2A0D10F2B21045813DA1DEC86
-:1016F000BD2B200CC0E02E246663FF842F2123C065
-:10170000C87FC30263FF792C20662B2104B1CC0C67
-:101710000C472C24665813CF1DECB32B200CC0E0D3
-:101720002E246663FF5A00006C1004C0B7C0A116D7
-:10173000ECB015ECA2D720D840B822C04005350245
-:101740009671957002A438040442C94B1AEC95199D
-:10175000EC9629A67EC140D30F6D4A050080880013
-:10176000208C220A88A272D10FC05008A53875B00B
-:10177000E363FFD76C100893149412292006655276
-:1017800088C0716898052A9CF965A29816EC892989
-:1017900021028A1409094C6590C78AA00A6A512A55
-:1017A000ACFD65A0BCCC5FDB30DA208C1258147C19
-:1017B000C0519A14C7BF9BA98E142EE20968E0603D
-:1017C0002F629E1DEC7A6FF8026000812DD2266890
-:1017D000D0052F22007DF9752C629DC79064C06DE5
-:1017E0009C118A142B200C2AA0200CBD11A6DD0A06
-:1017F0004F14BFA809880129D286AF88288C09799F
-:101800008B551FEC6C0FBF0A2FF2A368F00528223E
-:10181000007F894329D285D49065907760003D0090
-:10182000002B200C1FEC640CBD11A6DD29D2860F05
-:10183000BF0A6E96102FF2A368F00488207F8905F6
-:1018400029D285659165DA205814E7600013DA2003
-:10185000C0B65814E5600009C09063FFB9DA20589B
-:1018600014E28914899109FE506551E48C128D149B
-:10187000DA20DBD08DD09E100D6D515813549A1480
-:1018800064A208C75F8FA195A9C0510F0F479F128F
-:1018900063FEFB00C091C0F12820062C2066288C36
-:1018A000F9A7CC0C0C472C24666FC6088D148DD17B
-:1018B00070DE01C090DD90648159C9D32A12012BDA
-:1018C00021045813648A14C0B02B24668EA92AA060
-:1018D000200E28141CEC438D1415EC37C1700A77C8
-:1018E0003685562DDC28AC2C9C13DED0A8557CD335
-:1018F000022EDDF8D3E0DA40055B02DC305BFF8AC4
-:10190000D4A028200CB455C0D02B0A882F0A800CF4
-:101910008C11A6CC29C285AF3FAB9929C6851CEC9A
-:101920002CDEF0AC882D84CF28120329120478F322
-:10193000022EFDF8289020D3E007880CC17008081B
-:1019400047289420087736657FAB891413EC2A89E1
-:1019500090C0F47797491BEC28C1CA28210485144C
-:10196000099E4006EE11875304881185520E8802A5
-:101970000C88029BA09FA18F2B9DA598A497A7954B
-:10198000A603FF029FA22C200C1EEC11AECE0CCCA5
-:101990001106CC082BC2852DE4CF2BBC202BC6858D
-:1019A0002A2C748B12580D14D2A0D10F28203DC0C0
-:1019B000E07C877F2E24670E0A4765A07B1AEC0F18
-:1019C00088201EEBFD8F148EE48FF40888110A889E
-:1019D000020F8F14AFEE1FEC0A98910FEE029E904B
-:1019E0001EEC09C0801AEBFA2CD285AABAB8CC2812
-:1019F000A4CF2CD6852C21022F20700ECC02B1FF53
-:101A00002F24702C2502C020D10F87148770070760
-:101A10004763FD6E282123C099798B0263FE9ADD0E
-:101A2000F063FE9500DA20DB308C12DD505814F4A0
-:101A3000D2A0D10FC0E163FF7A8B148C12DD50C0AD
-:101A4000AA2E0A802A2468DA20581360D2A0D10F67
-:101A5000007096552B629E6EB8531DEBD42DD22686
-:101A600068D0048E207DE9452A629DCBAF2B2104EE
-:101A70002C20665812F8C090292466821418EBE2D4
-:101A80008F2108FF019F21C020D10F008B10C9B802
-:101A90008CA00C6C51CCCC8E241FEBD08DE19E140D
-:101AA0000FDD029DE18810658FA9C020D10FDA20DB
-:101AB000C0B658144DC020D10F0000006C1006298C
-:101AC0002102C0D07597102A32047FA70A8B357F78
-:101AD000BF052D25020DD902090C4C65C18216EBFC
-:101AE000B41EEBB228629EC0FA78F3026001882926
-:101AF000E2266890078A2009AA0C65A17A2A629DCD
-:101B0000DFA064A1772B200C0CBC11A6CC29C286C7
-:101B1000C08C79830260015719EBA709B90A299291
-:101B2000A3689007882009880C65814327C2851C1B
-:101B3000EBA964713A8931098B140CBB016FB11D9B
-:101B40002C20669F10B1CC0C0C472C24666EC6026C
-:101B500060014009FF5065F13A8A102AAC188934B7
-:101B6000C0C47F973C18EBAA1BEBA98F359C719BD7
-:101B7000708B209D7408BB029B72C08298751BEB12
-:101B8000A50F08409B730F881198777FF70B2F21C3
-:101B900002284A0008FF022F2502C0B4600004009A
-:101BA0000000C0B07E97048F362F25227D970488D1
-:101BB000372825217C9736C0F1C0900AF9382F3C90
-:101BC0002009094264908619EB7618EB7728967EF7
-:101BD00000F08800A08C00F08800A08C00F0880045
-:101BE000A08C2A629D2DE4A22AAC182A669D893019
-:101BF0007797388F338A3218EB8007BE0B2C21047D
-:101C0000B4BB04CC1198E0C08498E1882B9DE59A80
-:101C1000E69FE71AEB78099F4006FF110FCC020AF6
-:101C2000880298E2C1FC0FCC022CE604C9B82C2033
-:101C30000C1EEB670CCA11AECC06AA0829A2852D92
-:101C4000C4CF09B90B29A685CF5CC020D10FC081B4
-:101C5000C0900F8938C08779880263FF7263FF667E
-:101C600000CC57DA20DB30DC4058134DC020D10FB8
-:101C7000DA205813DD63FFE8C0A063FE82DA20C0DB
-:101C8000B65813D963FFD900DB402A2C74580C5A7C
-:101C9000D2A0D10F8A102B210458126E1EEB44C023
-:101CA000D02D246663FEB1006C1006D62019EB3FE0
-:101CB0001EEB4128610217EB3E08084C65805F8AE5
-:101CC000300A6A5169A3572B729E6EB83F2A92263A
-:101CD00068A0048C607AC9342A729D2C4CFECAAB71
-:101CE0002B600CB64F0CBD11A7DD28D2860EBE0AA4
-:101CF00078FB269C112EE2A32C160068E0052F62CB
-:101D0000007EF91522D285CF2560000D00DA60C073
-:101D1000B65813B5C85A60010F00DA605813B2659F
-:101D20005106DC40DB308D30DA600D6D51581227E2
-:101D3000D3A064A0F384A1C05104044763FF6D00E5
-:101D4000C0B02C60668931B1CC0C0C472C64666F36
-:101D5000C60270960A2B610458123EC0B02B64660E
-:101D60006550B42A3C10C0E7DC20C0D1C0F002DFCF
-:101D7000380F0F4264F09019EB0A18EB0B28967E8F
-:101D80008D106DDA0500A08800C08CC0A089301DC0
-:101D9000EB1A77975388328C108F3302CE0BC02406
-:101DA00092E12261049DE00422118D6B9BE59FE787
-:101DB00098E61FEB100998400688110822020FDDF3
-:101DC00002C18D9DE208220292E4B4C22E600C1F73
-:101DD000EB000CE811A7882C8285AFEE0C220B2BB0
-:101DE000E4CF228685D2A0D10F28600CD2A08C111E
-:101DF00019EAF80C8D11A988A7DD2ED2852B84CF86
-:101E00000ECC0B2CD685D10FC0F00ADF387FE8024C
-:101E100063FF6C63FF6000002A6C74C0B2DC20DDDD
-:101E20004058121CC0B063FF63C020D10F000000F7
-:101E30006C10042C221D2A221EC049D320293006F2
-:101E4000243468C0407AC105DDA060000200C0D023
-:101E50006E9738C08F2E0A802B3014C09629340616
-:101E60000EBB022E31022B34147E8004243502DE98
-:101E7000407AC10EC8ABDBD0DA302C0A00580A76A3
-:101E80002E31020E0F4CC8FEC020D10F6895F828E5
-:101E9000310208084C658FEF1AEAC61CEAC42BA26F
-:101EA0009EC09A7B9B462BC22668B0048D307BD99E
-:101EB0003B29A29DC0E3CB9394901BEAD72D31041C
-:101EC0009B9608DD110EDD029D979D9112EAD4C00C
-:101ED000E524C4A22E34062F310228A29D02FF025F
-:101EE000288C3028A69D2F3502C020D10FDA30C0B3
-:101EF000B658133DC020D10F6C10062920066898F3
-:101F000005289CF965825D29210209094C6592101A
-:101F1000CD51DB30DA20044C025812A1C051D3A0BD
-:101F2000C7AF2A360AC0E019EAA31DEAA91FEAA230
-:101F30008A3A16EA9FB1AC64C13528629E6F880266
-:101F40006001F129DC332992266890078B2009BBB8
-:101F50000C65B1E027629DC08E6471D82B200C0CFB
-:101F6000BC11A6CC29C2867983026001D219EA91FC
-:101F700009B90A2992A397106890082822000988B5
-:101F80000C6581BB27C2856471B5292006299CF99F
-:101F90006491EC2C20668931B1CC0C0C472C246662
-:101FA0006EC6026001A109F85065819B883689F4EC
-:101FB000088C14AC991CEA810C99022C21049970AC
-:101FC00019EA980808479971892A0988100899021E
-:101FD00018EA95089902997228301329301204885A
-:101FE0001006991008990228302C9A740C88100851
-:101FF000C802098802987389379975883898768A53
-:1020000039C0819A771AEA888935987B9978098945
-:10201000140A9902997A8A30893277A73618EA76B3
-:102020008F33987CC084987D882B2E761129761268
-:102030002F761319EA700A9F4006FF1104CA11098E
-:1020400088020FAA02987EC1F90FAA022A7610C050
-:10205000AA600001C0A6ADBF0CBC11A6CC29C285E8
-:102060002EF4CF09A90B29C685655107C020D10FD1
-:102070002B200C0CBC1106CC0828C28609B90A6FAB
-:10208000890260012E2992A36890082A220009AAD9
-:102090000C65A11F2AC28564A11928203D0828408B
-:1020A00064808C843504841464408485F574537F83
-:1020B0008436048414644077745374293013C08CBC
-:1020C00079886CC0902924670908476580ED8820CD
-:1020D00089F484351FEA4B048414A4940F440294B9
-:1020E000A014EA4608881104880298A1843698A3AF
-:1020F000048414A4990F990299A219EA42ADB42854
-:10210000C2852E44CF288C1028C6852821022F2076
-:1021100070098802B2FF2F2470282502C020D10F39
-:1021200000CC57DA20DB30DC4058121DC020D10F24
-:10213000C09163FF8FDA20C0B65812AB63FFE10095
-:10214000DA205812A963FFD88A102B2104581141B4
-:102150001DEA201FEA192B200CC0E02E24668A3AC3
-:1021600063FE480000DA20DB30DC40DD50581324E9
-:10217000D2A0D10F2A2C74DB40580B1FD2A0D10F54
-:10218000292123C08879830263FE202A12002C2093
-:10219000662B21042CCC010C0C472C246658112DE5
-:1021A0001DEA0C1FEA052B200CC0E02E24668A3A9B
-:1021B00063FDF800DA2058128C63FF64DA205BFFBD
-:1021C0001CD2A0D10F0000006C10089515C061C191
-:1021D000B0D9402A203DC0400BAA010A64382A2009
-:1021E0000629160668A8052CACF965C33B1DE9F263
-:1021F0006440052F120564F29C2621021EE9EE06BA
-:10220000064C6562E315E9EA6440D98A3529300352
-:102210009A140A990C6490CC2C200C8B149C110CF1
-:10222000CC11A5CC9C122CC286B4BB7CB30260023C
-:10223000D38F110EFE0A2EE2A368E0098620D30F89
-:102240000E660C6562BE88122882856482B6891487
-:1022500064905EDA80D9308C201EE9E81FE9E91D20
-:10226000E9D68B148DD4D4B07FB718B88A293C1026
-:10227000853608C6110E66029681058514A5D50F10
-:10228000550295800418146D8927889608CB11088B
-:1022900088140EBB02A8D8299C200F88029BA19805
-:1022A000A088929BA3088814A8D80F880298A22A15
-:1022B000AC1019E9D4C0C08F141EE9C586128D1167
-:1022C000286285AEDD08FF0B2CD4CF2821022F66B3
-:1022D000858B352A2070098802ABAA2825022A247A
-:1022E00070C020D10F29529E18E9B16F9802600288
-:1022F0000828822668800829220008990C6591F92F
-:102300002A529DC1CA9A1364A1EF2B200C262006E5
-:102310000CB811A5882D82860EBE0A7DC30260020C
-:10232000022EE2A368E0082F22000EFF0C65F1F3F5
-:10233000288285DE806481FF9810266CF96461FF35
-:102340002C20668831B1CC0C0C472C24666EC6025A
-:102350006001BC08FD5065D1B617E9B419E9981AB7
-:10236000E99F2C21048B2D2830102F211D0C881063
-:102370000BFB090C88020A880209BB0264415289DE
-:1023800010C04D9B90979198928D35D9E064D06C98
-:10239000D730DBD0D8307FD713273C10BCE92632AA
-:1023A000168C3996E69CE78A37B4389AE80B1314F2
-:1023B0006430492A821686799A9696978C778A7D18
-:1023C0009C982B82172C7C209A9A2A9C189B998681
-:1023D0007BB03BB8896DB9218BC996A52692162A88
-:1023E000AC18B8999BA196A08BC786CD9BA22B92C7
-:1023F0001596A49BA386CB2CCC2026A605C0346BB7
-:10240000D4200D3B0C0DD8090E880A7FB705C0906B
-:102410009988BC88C0900B1A126DAA069988998B6E
-:10242000288C18C0D01BE9831CE98216E978B1FF1B
-:102430002A211C23E6130F0F4F26E6122F251D7F9E
-:10244000A906C0F0C08028251D05F6111AE9718F74
-:10245000202BE6152CE6162DE61726E6180AFA02BA
-:102460002AE614292006299CF96490FF29200C8D66
-:1024700015C0801AE9570C9C11AA99A5CCDA202B1B
-:10248000C2852894CF0B4B0B2BC685C0B08C165839
-:102490001114D2A0D10F8A356FA548D8308BD56DD5
-:1024A000A90C8A860A8A14CBA97AB337288C10C063
-:1024B00080282467080B4765B112DA20DB302C1224
-:1024C00006581137D3A0C0C1C0D02DA4039C1563FA
-:1024D000FD26863664610C8910C04D9B90979198BB
-:1024E0009263FEA4C08163FFC78A15CCA7DA20DB04
-:1024F000308C1658112BC020D10FDA20C0B65811DD
-:10250000BA63FFE400DA208B115811B763FFD900DA
-:102510009E178A132B210458104F8E17C0B02B24FE
-:102520006663FE34C08063FE09DA20DB308C16DD82
-:1025300050581233D2A0D10FDA205811AB63FFA844
-:102540002D2123C0C87DC30263FE0D8A132B2104F5
-:102550002C20669817B1CC0C0C472C246658103DE3
-:102560008E17C0D02D246663FDEE0000262123B017
-:102570006606064F262523656EF128206A7F8705AB
-:102580000829416490A5C0D01BE91C19E92B26201D
-:102590000723E61BB16609FA022BE61A28200A2D4A
-:1025A000E61D2AE61E09880228E61C88260606473C
-:1025B00028E6202B220826E53E2BE6212D24072C99
-:1025C00020062A206468C347B44463FE9EDB30DAE9
-:1025D000208D15C0CE2E0A802C24688C1658107BB6
-:1025E000D2A0D10F8E102A321616E8F30A2A1486CA
-:1025F000662BE61297E127E61328E614AA66096619
-:102600000296E02EEC4869ED50C14663FD7A000069
-:1026100064AFB419E8E928201689920A880C009161
-:102620000400881AA8B8982963FF9C002B21046E27
-:10263000B81E2C2066B8CC0C0C472C2466C9C09E52
-:10264000178A135810048E17C0348F20C0D02D2441
-:1026500066C06826240663FF2C008D35C08064D0D8
-:102660004AD9E0DC30DBE0DF301AE8F4B188B4FFAF
-:1026700017E8F486C9249DFF8DC82CCC102D463058
-:102680000767012D46320A66011DE8EE264631AD88
-:102690006D2D463326F21597B796B684C3BCBB940E
-:1026A000B58D35299C107D83C22F211DC14663FD48
-:1026B0004B0000006C1006292006289CF86582C398
-:1026C0002921022B200C09094C6590E116E8B90C70
-:1026D000BA11A6AA2DA2862C0A127DC3026002900E
-:1026E00019E8B509B90A2992A36890078C2009CC8A
-:1026F0000C65C27C29A2856492762D629E1AE8AB95
-:102700006FD8026002722AA22629160168A0082B3F
-:1027100022000ABB0C65B26029629DC18C6492588C
-:102720002A21200A806099102C203CC7EF000F3E20
-:10273000010B3EB1BD0FDB390BBB098F260DBD115F
-:102740002DDC1C0D0D410EDD038E27B1DD0D0D417D
-:102750000FEE0C0DBB0B2BBC1C0BB7027EC71C2C49
-:1027600021257BCB162D1AFC0CBA0C0DA16000099B
-:102770003E01073EB1780987390B770A77EB026093
-:10278000020A2C2123282121B1CC0C0C4F2C25230B
-:102790007C8B29B0CD2D2523C855DA20DB30580F8E
-:1027A000FA292102CC96C0E80E9E022E2502CC57B3
-:1027B000DA20DB30DC4058107AC020D10F2C2066A4
-:1027C0008931B1CC0C0C472C24666EC6026001D353
-:1027D00009FD5065D1CD2F0A012E30112922146434
-:1027E000E01128221B090C4400C10400FA1A0A88CF
-:1027F0000228261B2E3010C0A0C0B088301CE86E06
-:1028000094129513C04125203C2CC022088D1477CA
-:1028100087052F0A010CFA38C0F2C0840858010F4E
-:102820005F010F4B3805354007BB10C0F0084F382B
-:1028300008FF100FBB0228ECFEC0F0084F38842BB5
-:102840000BA8100AFF102A21200F88020B8802080B
-:10285000440218E87D8F110844022821250A2A1411
-:102860000828140488110A88022A210494F08B2075
-:1028700004E41008BB1104BB02C04A04BB029BF174
-:10288000842A08AB110BEB0294F40A54110B440296
-:102890000555100D1B4094F707BB100B550208554A
-:1028A00002C08195F68433C05094F3B1948B329575
-:1028B000F898F99BF2C080C1BC24261498FB9BF5C4
-:1028C00099FA853895FC843A94FD8B3B9BFE8839B8
-:1028D00098FF853525F6108436851324F6118B373D
-:1028E00084122BF612C0B064C08189307797468D70
-:1028F0003288332E30108F111CE840099940069918
-:10290000112CF614C0C42CF6158C2B2DF61A28F6B3
-:102910001B2BF61904A81109880208EE0219E835E4
-:10292000C18008EE0209C90229F6162EF618C09ECB
-:10293000600004000000C09A2F200C18E8250CFE4F
-:1029400011A8FFA6EE2DE2852BF4CF0D9D0B2DE6F1
-:1029500085C87F8A268929A7AA9A260A990C090977
-:102960004829252565504CC020D10F00C09A63FF2F
-:10297000C6DA2058109D63FE34DA20C0B658109A8B
-:1029800063FE2A00689738C020D10F0000DA20DBF0
-:1029900070581057C0B0C0C10ACA390ACB3865BDDB
-:1029A000E063FE098A102B2104580F2AC0B02B24A3
-:1029B0006663FE21DB402A2C7458090FD2A0D10F88
-:1029C000DA20580F2F63FCF76C1004C020D10F00E1
-:1029D0006C1004290A801EE81D1FE81D1CE7F50C79
-:1029E0002B11ACBB2C2CFC2DB2850FCC029ED19CA4
-:1029F000D0C051C07013E81914E81818E8162AB2AC
-:102A000085A82804240A234691A986B8AA2AB6854F
-:102A1000A98827849F25649FD10F00006C100AD6D7
-:102A200030283010292006288CF964829B68980B86
-:102A30002A9CF965A1B2022A02580F1189371BE7B7
-:102A4000DEC89164520E2A21020A0C4C65C2588DD0
-:102A50003019E7D774D7052E212365E29E2F929E69
-:102A60001AE7D36FF8026002532AA22668A0082C46
-:102A700022000ACC0C65C2442A929D64A23E9A159B
-:102A80001FE7CD8D67C1E664D00E2B620618E7CA3A
-:102A900064B0052880217B8B422B200C18E7C50CE5
-:102AA000BC11A8CC29C28679EB450FBE0A2EE2A341
-:102AB00068E0048F207EF9372CC2859C1864C233ED
-:102AC0002B212F87660B7B360B790C6F9D266ED2E0
-:102AD000462C203D7BC740CE5560001E2A200CC1ED
-:102AE000B28C205810759A1864A2458D6763FFCF89
-:102AF000C0C063FFC5D7B063FFD300C0E060000271
-:102B00002E60030EDB0C6EB20EDC700CEA11AA6AAA
-:102B10002AAC20580199D7A0DA20DB70C1C82D213A
-:102B20002058101B8C268B279A160CBB0C7AB334BA
-:102B30008F18896399F3886298F28E659EF82D60EC
-:102B4000108A189D1768D729C0D09DA92C22182B50
-:102B500022139CAB9BAA97A58E667E73026000979A
-:102B6000CF5860001FDA208B16580FE165A138633B
-:102B7000FFBDC081C0908F18C0A29AF999FB98FA46
-:102B800097F563FFD2DB30DA20DC40580F85C05167
-:102B9000D6A0C0C02BA0102CA4039B172C12080297
-:102BA0002A02066B02DF702D60038E179D149E10A3
-:102BB0000CDD11C0E0AD6D2DDC205801188C148B9C
-:102BC00016ACAC2C64038A268929ABAA0A990C9A04
-:102BD00026886609094829252507880C98662F222A
-:102BE00018A7FF2F261863FE96DA20DB30DC40DDC5
-:102BF00050581083D2A0D10FC0302C20668961B10B
-:102C0000CC0C0C472C24666EC6026000D2C0300982
-:102C1000FD5065D0CA8E6764E069647066DB608CC5
-:102C200018DF70DA202D60038E170CDD119E10ADB9
-:102C30006D2DDC201EE7845800F9232618DA208B3E
-:102C400016DC402F2213DD50B1FF2F2613580F241E
-:102C5000D2A0D10F0028203D084840658DE76F9530
-:102C60003EDA308DB56D990C8CA80C8C14CACF7CD3
-:102C7000D32D2AAC10C090292467090D4764DDC507
-:102C8000600092002C1208066B022D6C20077F0258
-:102C90008E17DA209E101EE76B58007D63FF9A00A6
-:102CA000C09163FFD1000000655081DA20DB60DC59
-:102CB00040580F3BC020C0F02FA403D10FDA20C032
-:102CC000B6580FC963FFE000006F950263FD6CDA30
-:102CD00020DB30DC40DD50C4E0580EBCD2A0D10F68
-:102CE0008A152B2104580E5B232466286010981740
-:102CF00063FF2100DA20580FBC63FFABC858DB30FC
-:102D0000DA20580EA12A210265AF9CC09409A902BD
-:102D100029250263FF91DB30DC40DD50C0A32E0A81
-:102D2000802A2468DA20580EA9D2A0D10FC020D161
-:102D30000FDA202B200C580FC563FF6B6C10042892
-:102D40002006C062288CF8658125C050C7DF2B2281
-:102D50001BC0E12A206B29212300A104B099292559
-:102D600023B1AA00EC1A0BC4010A0A442A246B04FA
-:102D7000E4390DCC030CBB012B261B6440692920D0
-:102D80000C1BE70B0C9A110BAA082FA2861BE70954
-:102D90006FF9026000B60B9B0A2BB2A368B0082C37
-:102DA00022000BCC0C65C0A42BA2851DE72D64B0BE
-:102DB0009B8C2B2421040DCC029CB08820C0C5081C
-:102DC00088110C880298B1882A08441198B48F346D
-:102DD00094B79FB5C0401EE6FE2DA2850E9E082525
-:102DE000E4CF2DDC282DA68529210209094C689401
-:102DF0001A689820C9402A210265A00B2A221E2B9E
-:102E0000221D7AB10265A079C020D10F2C21236543
-:102E1000CFDE6000082E21212D21237EDBD52B2241
-:102E20001E2F221D2525027BF901C0B064BFC413EB
-:102E3000E6DF2CB00728B000DA2003880A28824C8D
-:102E4000C0D10B8000DBA065AFE763FFA62A2C741E
-:102E5000C0B02C0A02580D951CE7039CA08B2008DB
-:102E6000BB1106BB029BA1893499A263FF790000C4
-:102E7000262468DA20DB30DC40DD50580FE1D2A098
-:102E8000D10FDA202B200C580F58C020D10F000092
-:102E90006C1006073D14C080DC30DB40DA20C047F0
-:102EA000C02123BC30032838080842774001B1DD37
-:102EB00064815A1EE6BB19E6BC29E67ED30F6DDAA3
-:102EC0000500508800308CC0E0C02025A03C14E6EE
-:102ED000BAB6D38FC0C0D00F87142440220F8940C8
-:102EE000941077F704C081048238C0F10B2810C019
-:102EF00044C02204540104FD3802520102FE380885
-:102F0000DD10821C07EE100E6E020EDD02242CFE78
-:102F1000C0E004FE380AEE100E88020D88028DAB68
-:102F20001EE6AA08D8020E880298B0C0E80428104D
-:102F30000E5E0184A025A125084411084402052540
-:102F400014045511043402C0810E8E3994B18FAA35
-:102F500084109FB475660C26A11FC0F2062614606B
-:102F60000009000026A120C0F20626140565020F04
-:102F7000770107873905E6100778100866020655BD
-:102F80000295B625A1040AE611085811082802087E
-:102F9000660296B7C060644056649053067E11C0C6
-:102FA000F489C288C30B340B96459847994618E6B6
-:102FB000919F410459110E99021FE68F020E470896
-:102FC000D80298420E99029F40C1E00E990299449E
-:102FD0002FA00CB4380CF91114E67E1EE675A4FF80
-:102FE000AE992E928526F4CF0E880B289685D10FA8
-:102FF0002BA00C1FE66F1CE6760CBE11ACBBAFEE2F
-:103000002DE28526B4CF0D3D0B2DE685D10FC08076
-:1030100005283878480263FEA263FE966C1006C04D
-:10302000C06570F18830C030088714778712C0B04F
-:10303000C0A619E661299022C030CC97C03160004B
-:1030400003C0B0C0A6C0E0C091C0D4C08225203C5F
-:103050000B3F109712831CC0700858010D5D0108CA
-:103060009738C0800B9838077710048810086802DA
-:10307000087702C0800D98382D3CFE0888100D9E00
-:10308000388D2B0AEE1008EE0207EE020CB8100F76
-:10309000DD02053B400EDD029D408920043D100805
-:1030A00099110D99022D210409A90208DD119941F8
-:1030B000872A05B9100D3D020ABB110DBB02087726
-:1030C0000297442821258712082814048811071E16
-:1030D0004007EE100E990275660926211F06261478
-:1030E000600006002621200626140868029B470976
-:1030F0008802984629200CD2C0C0800C9E111BE685
-:10310000341FE62BAB99AFEE2DE2852894CF0DADA1
-:103110000B2DE685D10FDD40C0A6C0B08E51CAE0B0
-:10312000B2AAB1BB2DDC108F500E783698100877FC
-:103130000C9FD898D989538F52991199DB9FDA7EC9
-:103140008309B1CC255C10C97763FFCF88108D113E
-:1031500008E70C9751AD8DD7F078DB01B1F79D539F
-:1031600097528830C030088714088840648ED5652F
-:10317000BEC963FEBC0000006C1004D720B03A88C2
-:1031800020C0308221CAA0742B1E2972046D080F42
-:10319000C980C9918575B133A2527A3B0B742B0853
-:1031A00063FFE900649FECD10FD240D10F00000013
-:1031B0006C1008D630C0709515DA408E3914E5FED3
-:1031C0009A1464E0026451FC2920062A9CF865A246
-:1031D0005F2A21020A0B4C65B21F2C320015E5F460
-:1031E00074C7052D212365D3242E529E1AE5F06F56
-:1031F000E80260021B2AA22668A0082B22000ABB54
-:103200000C65B20C2E529D1DE5EB64E2038B386415
-:10321000B22D9E16C8BC8D691EE5E864D0052EE06F
-:10322000217BEB492E200C18E5E20CEF11A8FF29B9
-:10323000F286C186798B4A17E5DF07E70A2772A372
-:10324000687004882077893925F2856452A2272185
-:103250002E07B73607B90C6F9D01D7B089696E92FA
-:103260004228203D7B873C8A15CDAF600018C1B253
-:103270008C202A200C580E90D5A064A2AC8B6863D9
-:10328000FFCBC05063FFC3C0E06000022E60030E9E
-:103290009B0C6EB20EDC700CEA11AA6A2AAC285B99
-:1032A000FFB6D7A0DA20DB70C1C42D211F580E381D
-:1032B0008C268B27D4A00CBB0C7AB3258A63C090D4
-:1032C0009A538862995898528F659F598E679E5B72
-:1032D0008D6697559D5A8B687B7B748B15CEB3603A
-:1032E000000DDA20DB40580E0265A10D63FFCC0013
-:1032F000DA20DB308C14580DAAD6A0C0C0C0D19DF6
-:10330000152CA403DA20DB60DF70DC50C0E0256000
-:10331000039E101EE5C10C5D11AD6D2DDC285BFF19
-:103320003F8E66A5A88F67286403AF7F77FB01B146
-:10333000EE9E669F678D268C29A4DD0DCC0C9D2604
-:103340008B680C0C482C252507BB0C9B6863FEC3BF
-:103350002C20668961B1CC0C0C472C24666EC60209
-:103360006000B809FD5065D0B2CBBF8E69CBEBDBF6
-:1033700060DC50DF70DA201EE5BC2D6003C0809851
-:10338000100CDD11AD6D2DDC285BFF248B15C942BF
-:103390008A2629220904AA082A26060A990C09095C
-:1033A0004829252565B13CC020D10F00DB602D6C7C
-:1033B00028DF70DA20C0C01EE5AC9C10DC505BFE3C
-:1033C000B463FFC7002D203D0D4D4065DDF96FE56D
-:1033D00022DA308F456DE90C8EAA0E8E14C9E37E79
-:1033E000F3112AAC10C090292467090F4764FDD758
-:1033F00060014100C09163FFED00881565814CDAE2
-:1034000020DB608C14580D66C020C09029A403D125
-:103410000FDA20C0B6580DF463FFDE008A162B21A8
-:1034200004580C8CC0A02A24668B6863FF3A000005
-:10343000002B9CF965B0C5DA20580C9163FD910012
-:103440002B200C0CBA11A5AA2FA286C1C27FC302E1
-:103450006000FC0DB90A2992A36890078C2009CC62
-:103460000C65C0EB26A2856460E52C20668931B12D
-:10347000CC0C0C472C24666FC60270960ADAE02B3F
-:103480002104580C74272466893077974B18E55926
-:103490001DE55A8A328B33C0F42C2104099E400664
-:1034A000EE1104CC110ECC029F61C1E00ECC029D46
-:1034B000608F2B9A669B679C64976508FF029F62EA
-:1034C0002F200C18E5430CFE11A5EE2DE285A8FF78
-:1034D00027F4CF2DDC202DE6858F1565F091C020D7
-:1034E000D10F00002A2C748B14580643D2A0D10FA0
-:1034F00000DA20DBE0580DBC63FEFE0000DA20DBC2
-:10350000308C148D15580E3ED2A0D10F00008815B6
-:10351000C888DA20DB30580C9C2A210265AEDAC05C
-:103520009409A90229250263FECFDA202B200C582A
-:103530000DC763FEC4272468DA20DB302C12042D6B
-:1035400012052E0A80580CA163FC7C00C020D10F0C
-:10355000DA20580DA58A15CDA1DA20033B022C12E2
-:1035600004580D0F27A403C020D10F00C020D10F95
-:103570002A2C748B14580620D2A0D10F6C100C2862
-:103580002102941008084C6583621FE50929F29E08
-:103590006F98026003661DE50529D2266890082A07
-:1035A000220009AA0C65A3542CF29D64C34E2B2063
-:1035B0000C0CB611AF66286286C1EC78E30260039A
-:1035C0004619E4FC09B90A2992A36890078A2009E0
-:1035D000AA0C65A33224628564432CC0E12A310918
-:1035E000C07027246689359A11992A8836991298CD
-:1035F0002B89379813992C883899140858149815E2
-:10360000982D89392A25042E251D29251C28302886
-:10361000C09228243C2A30290808479816098901B5
-:103620002A243D2A311599170A094109A90C299C18
-:10363000EC29251F7E87192D2A000DA06000083E69
-:10364000010A3EB1AD08DA390EAA110A990C2925F2
-:103650001F2A211F18E5060A8160C1D0941A951B04
-:1036600001083E00053EB184054839843C259CFC98
-:103670000D883629201408AA1C8D3D2726182E26D1
-:10368000132E26142E261527261B2E246B2724677F
-:1036900027246808581C0909432924142932112AAF
-:1036A000252E28252F27252427252527252C2725A6
-:1036B000232525202425212D2522841A2D211C8512
-:1036C0001B6FD202600209C0A099186D080AB1AA46
-:1036D00000A10400E91A7D9B0263FFEE8918C080F7
-:1036E000C0E1C070C0D29B1D951B961C9C1E16E4A9
-:1036F000D12C203D15E4E00C0B400DCC010BE7383C
-:103700001DE4C30A77100CE8380B8810C0C49C4134
-:103710000877029D40B0A80988118B209C499D48DC
-:10372000954B9643087702861418E4D115E4B9083E
-:10373000770205BB029B4A9B429746881287110875
-:10374000DA149A4E0D88100D77110877021AE4AC3E
-:1037500006D8140D6610087702974FC78F984D98BA
-:103760004C9845871598440715140D55110A5502B4
-:10377000954715E4C18A262D46102D46182D462062
-:103780002C46112C46192C46212B46122B461A2862
-:1037900046142846152B46228816254624254626FB
-:1037A0008B170A0C48090D4885130EDD1105CC1145
-:1037B0000839400BEB390299101EE4B00DCC020D14
-:1037C0005511082D400655022E461316E47B0FDDD9
-:1037D00011254616080840851B0188100DBB02867E
-:1037E000671DE4A70988020CBB0219E4771CE4A555
-:1037F0002B46172D461BA7661BE4A4C0702C461C45
-:103800000988028C1E28461E2B4623C0908B1D293A
-:10381000461D29461F18E49D29462728462529319B
-:10382000162E200629246A243117962D2425238656
-:103830001CCCE1272407C0D7090E4064E0829A29F6
-:1038400009284164809164409B2D2406C098094951
-:1038500036280AA024628501C404A844282104242F
-:1038600066850888118E3F8A3E2D32100EA41800FE
-:10387000C4040EAE1800EE110ACA530EDD02C0E3F6
-:103880000E880298C11EE48209084E9EC08E2094C4
-:10389000C398C59DC418E44E1DE47F05EE110EAA21
-:1038A000020DAA02A8B82784CF9AC21EE44024F2CF
-:1038B0009D27E4A2244C1824F69D655052C020D1C7
-:1038C0000F2D2406C0A0C09809493604A93863FF0B
-:1038D0007FC0A063FE070000654F6DC098C0A82A96
-:1038E000240663FF6B2D2406C09063FF63CC57DA78
-:1038F00020DB308C10580C2AC020D10F00DA20C0F9
-:10390000B6580CB963FFE500DA20580CB763FFDC4A
-:103910002A2C748B10580538D2A0D10F6C100628B1
-:1039200020068A336F8202600161C05013E42029AF
-:10393000210216E41F699204252502D9502C201576
-:103940009A2814E41D8F2627200B0AFE0C04770901
-:103950002B711C64E1398E428D436FBC0260016F94
-:1039600000E104B0C800881A08A80808D8029827FF
-:103970002B200668B32ECE972B221E2C221D011160
-:10398000027BC901C0B064B0172CB00728B000DAC0
-:103990002003880A28824CC0D10B8000DBA065AFD1
-:1039A000E7C020D10F2D206464DFCA8B29C0F10B42
-:1039B000AB0C66BFC02B200C0CBC11A6CC28C28659
-:1039C0002E0A0878EB611EE3FB0EBE0A2EE2A36806
-:1039D000E0052822007E894F29C2851EE4076490F5
-:1039E000461FE4159E90C084989128200A95930F55
-:1039F000880298928E200FEE029E942F2007882630
-:103A00002F950A98969A972E200625240768E34357
-:103A10002921022AC2851DE3EE2AAC20ADBD25D4A2
-:103A2000CF2AC68563FF4E002E2065CBEDC08228CD
-:103A30002465C9F605E4310002002A62821BE3F71F
-:103A40002941020BAA022A668209E4312921026374
-:103A5000FF23000064DFB88F422E201600F1040D12
-:103A6000EE0C00EE1AAEAE9E2963FFA38A202B3225
-:103A700021B1AA9AB0293221283223B499293621BA
-:103A80007989A92B32222B362163FFA0C020D10FC8
-:103A90009F27252415ACB828751C2B2006C0C12EE5
-:103AA000BCFE64E0AB68B7772DBCFD65DEC72D209A
-:103AB00064C0F064D0868E290EAE0C66E089C0F139
-:103AC00028205A288CFE08CF3865FEE863FF58008E
-:103AD00000E0049310C0810AF30C038339C78F08F8
-:103AE000D80308A80108F80C080819A83303C80C63
-:103AF000A8B828751C030B472B24158310CBB700DF
-:103B0000E104B0BC00CC1AACAC0CDC029C27659E76
-:103B10005EC0B20B990209094F29250263FE5000CD
-:103B20002D206A0D2D4165DF7EDA20C0B0580C755E
-:103B300064AF18C0F163FEEF9F2763FFD02E221FF2
-:103B400065EE3263FF79000028221F658E2763FF30
-:103B50006E252406252502C09063FE196C100665AB
-:103B600071332B4C18C0C7293C18C0A1C08009A8CC
-:103B7000380808426481101CE38A1AE38B2AC67E47
-:103B80002A5CFDD30F6DAA0500B08800908C894097
-:103B9000C0A00988471FE3B4080B47094C50090D22
-:103BA0005304DD10B4CC04CC100D5D029D310CBB70
-:103BB000029B3088438E2098350FEE029E328D2670
-:103BC000D850A6DD9D268E40C0900E5E5064E097D2
-:103BD0001CE39A1EE389038B0BC0F49FB19EB02DAA
-:103BE000200A99B30CDD029DB28F200CFF029FB416
-:103BF0008E262D20079EB68C282DB50A9CB7292429
-:103C0000072F20062B206469F339CBB61DE36B2305
-:103C100020168DD20B330C00D10400331AB48DA3BF
-:103C2000C3932922200C13E36A1FE3610C2E11AF0A
-:103C3000EEA3222924CF2FE285D2A00FDD0B2DE6A3
-:103C400085D10F002E200CB48C0CEB111FE3611DED
-:103C5000E358AFEEADBB22B28529E4CF02C20B22FE
-:103C6000B685D2A0D10F00002E200C1CE3511FE31B
-:103C7000580CEB11AFEEACBB22B28529E4CF028227
-:103C80000B22B685D2A0D10FC0D00BAD387DC802B3
-:103C900063FEEC63FEE08E40272C747BEE12DA703C
-:103CA000C0B32C3C18DD50580A7B8940C08063FEAD
-:103CB000E3DE60DA20DB30DC40DD505800059A108E
-:103CC000DB50077A0258044C881063FEF8000000AD
-:103CD0006C100692121EE3428C40AE2D0C8C472EC7
-:103CE0003C1804CA0BD9A07DA30229ADF875C30204
-:103CF000600084C0B0C023C0A09D106D0844B89F70
-:103D00000EB80A8D900EB70BB8770D6D36ADAA9D23
-:103D1000800D660CD8F000808800708C879068B1A8
-:103D200024B22277D3278891C0D0CB879890279C44
-:103D30001000708800F08C9D91CB6FC08108BB0390
-:103D400075CB3663FFB4B1222EEC1863FFD4859295
-:103D50000D770C86939790A6D67D6B01B1559693FF
-:103D60009592600016B3CC2D9C188810D9D078D3CA
-:103D7000C729DDF863FFC100C0238A421BE3470067
-:103D8000CD322D44029B3092318942854379A10581
-:103D90001EE3430E550187121BE334897095350BE2
-:103DA0009902993288420A880C98428676A6A6968D
-:103DB000768F44AFAF9F44D10F0000006C10089382
-:103DC00011D6308830C091086351080847059838EB
-:103DD0009812282102293CFD08084C6581656591EF
-:103DE000628A630A2B5065B18B0A6F142E0AFF7C1E
-:103DF000A60A2C205ACCC42D0A022D245A7FE00298
-:103E0000600215892888261FE32609880C65820F21
-:103E10002E200B0FEE0B2DE0FE2EE0FF08DD110E25
-:103E2000DD021EE320AEDD1EE3201CE3200EDD01DB
-:103E30000DCC37C180084837B88DB4889810896098
-:103E40001AE2DE7B96218B622AA0219C147BA317A9
-:103E50009D132A200C8B108C20580B978C148D13DB
-:103E6000DBA0CEAC6001C4002E200C1BE2D10CEA1A
-:103E7000110BAA082BA2861FE2CF7BDB3B0FEF0AB8
-:103E80002FF2A368F0052822007F892C2BA28564DD
-:103E9000B0AA87628826DE700C7936097A0C6FAD7D
-:103EA0001C8F279B1508FF0C77F3197E7B729D13DF
-:103EB0009C149B15CF56600025C0B063FFD0D790EF
-:103EC00063FFDD00009D139C14DA20DB70580B08A3
-:103ED0008B158C148D1365A06A8E6263FFCC00DA9B
-:103EE000208B11DC40580AAED6A08B15C051DE7075
-:103EF000DA20DC60DD405BFF768D138C14D9A02EB8
-:103F0000200C1BE2AB1FE2B20CEA11AFEFC0E0AB3A
-:103F1000AA2BA2852EF4CF0B990B29A68563FF1D32
-:103F200000DA20DC60DD40DE708912282007DF50D7
-:103F3000A9882824075BFF09D2A0D10F00DBE0DAB3
-:103F400020580B296550EF2A20140A3A4065A0EB4F
-:103F5000DB60DC40DD30022A0258099CD6A064A058
-:103F6000D584A183A0040447030547951203635138
-:103F7000C05163FE5C2C2006D30F28CCFD6480A5C5
-:103F800068C704C0932924062C2006C0B18D641F85
-:103F9000E28A9D279D289D298FF29D2600F104002D
-:103FA000BB1A00F004B0BE0EDD01C0F0ADBB8D65E4
-:103FB0002F24070D0E5E01EE11AEBB2E0AFEB0BB24
-:103FC0000B0B190EBB36C0E20B0B470EBB372B2475
-:103FD0001618E2820A09450D0B422B240B29240AEC
-:103FE000B4BE2E240C7D88572920162FCCFDB09D01
-:103FF0000A5C520DCC362C246465FDEC0C0C476435
-:10400000CDE618E26D8E2888820C9F0C008104009A
-:10401000FF1AAFEE9E2963FDCF1CE29C63FE1300E6
-:104020001CE29363FE0C8D6563FFA500DA202B2054
-:104030000C580B06645F0FC020D10F00C020D10FB9
-:10404000C093292416C09363FFA000006C1004C025
-:104050006017E2561DE259C3812931012A3008292F
-:10406000240A78A108C3B27BA172D260D10FC0C16B
-:104070006550512625022AD0202F200B290AFB2B20
-:1040800020142E201526241509BB010DFF0928F147
-:104090001C2B2414A8EE2EF51C64A0B52B221E2880
-:1040A000221D0111027B8901DB6064B0172CB0076F
-:1040B00028B000DA2007880A28824CC0D10B800083
-:1040C000DBA065AFE7DB30DC40DD50DA205800D8FC
-:1040D000292102090B4CCAB2D2A0D10F00CC5A2C14
-:1040E00030087BC1372ED02064E02D022A02033B2A
-:1040F00002DC40DD505800CED2A0D10F2B2014B0EE
-:10410000BB2B24140B0F4164F0827CB7CAC0C10CD6
-:104110009C022C2502D2A0D10FC020D10F2E200648
-:1041200069E2C12F21020F0F4C69F1B8262406263F
-:1041300025022B221E28221D2A200B2920150DAA1C
-:10414000092CA11C262415AC9929A51C7B814A6049
-:104150000049B0BB2B24140B0D41CBD67CB7022CED
-:1041600025022B221E2E221D7BE9022B0A0064B0A1
-:10417000172CB00728B000DA2007880A28824CC024
-:10418000D10B8000DBA065AFE7C020D10F2624064D
-:10419000D2A0D10F26240663FFC7DB601DE20764AF
-:1041A000BF422CB00728B000DA2007880A28824CCA
-:1041B000C0D10B8000DBA065AFE71DE1FF63FF24EA
-:1041C0006C1004282006C0646F8564CA5B29201423
-:1041D0007D9726DA20DB30DC40055D025800192986
-:1041E0002102090A4CC8A3C020D10F00C0B10B9B0B
-:1041F000022B2502C020D10F0000022A02033B023D
-:104200002C0A015800CAC9AADA20DB30DC40580960
-:10421000E429A011D3A07E97082C0AFD0C9C012C48
-:10422000A411C0512D201406DD022D241463FFA219
-:10423000DA20DB30DC40DD50C0E0580964D2A0D188
-:104240000F0000006C100616E1DA1CE1DA65513B44
-:10425000C0E117E1D62821028B2008084C65807B3D
-:104260002932000969516993722A629E6EA8482A10
-:10427000722668A0027AB93F2A629DB44FCBA72B61
-:10428000200C0CBD1106DD0828D28678FB150CBF6A
-:104290000A2FF2A368F00488207F89072DD285D3E6
-:1042A0000F65D0602A210419E202D30F7A9B1DDA30
-:1042B00020580864600024002C21041BE1FD7CBB15
-:1042C00013DA20C0B658085FC9536000EFDA2058EF
-:1042D0000A46600006DA20C0B6580A436550DDDCA5
-:1042E00040DB308D30DA200D6D515808B8D3A06412
-:1042F000A0CA1CE1B0C05184A18EA00404470E0ED8
-:104300004763FF50002B2104C08C8931C070DF70DF
-:1043100009F950098F386EB8172C2066AECC0C0CFA
-:10432000472C24667CFB099D105808CA8D10272451
-:104330006694D11EE1B6B8DC9ED0655056C0D7B8A1
-:104340003AC0B1C0F00CBF380F0F42CBF119E19465
-:1043500018E19628967EB04BD30F6DBA0500A08861
-:1043600000C08C2C200CC0201DE19A0CCF11A6FFA0
-:104370002EF285ADCC27C4CF0E4E0B2EF685D10F75
-:10438000C0800AB83878D0CD63FFC1008E300E0EE1
-:104390004763FEBD2A2C742B0A01044D025808BD48
-:1043A0002F200C12E18B0CF911A699A2FF27F4CF54
-:1043B000289285D2A008480B289685D10FC020D11D
-:1043C0000F0000006C1004C060CB55DB30DC4005F2
-:1043D0005D02022A025BFF9B29210209084CC88268
-:1043E000D2A0D10F2B2014B0BB2B24140B0C41CB2B
-:1043F000C57DB7EBC0C10C9C022C2502D2A0D10F09
-:104400000000022A02033B02066C02C0D0C7F72E4E
-:10441000201428310126250228240A0FEE012E241B
-:104420001458010D63FFA300262406D2A0D10F006B
-:104430006C1006282102D62008084C65809D2B2090
-:104440000C12E15B0CB811A2882A8286B5497A93D6
-:104450000260009719E15809B90A2992A3689008E7
-:104460002A620009AA0C65A0822882851CE1636487
-:1044700080799C80B887B14B9B819B10655074C03C
-:10448000A7D970280A01C0D0078D380D0D42CBDEA8
-:104490001FE1441EE1452EF67ED830D30F6D4A054C
-:1044A00000808800908C2E3008C0A000EE322E7460
-:1044B0000028600C19E1470C8D11A2DDA988C020ED
-:1044C0002CD2852284CFD2A00CBC0B2CD685D10F48
-:1044D000C0F0038F387FA0C063FFB400CC582A6CB3
-:1044E00074DB30DC405807F1C020D10FDA60580986
-:1044F000BE63FFE7DD402A6C74C0B0DC705808650D
-:104500002E30088B1000EE322E740028600C19E15A
-:10451000300C8D11A2DDA988C0202CD2852284CF39
-:10452000D2A00CBC0B2CD685D10F00006C10042936
-:104530002014282006B199292414688124C0AF2CA6
-:104540000A012B21022C24067BA004C0D02D2502B9
-:10455000022A02033B02044C02C0D05800BFD2A082
-:10456000D10FC020D10F00006C1004293101C2B45A
-:1045700029240A2A3011C28378A16C7BA169645076
-:10458000472C2006C0686FC562CA572D20147CD7FF
-:1045900022DA20DB30DC40DD505BFFA52921020957
-:1045A0000E4CC8E2C020D10FC0F10F9F022F250290
-:1045B000C020D10FDA20DB30C0C05BFFDC28201424
-:1045C00006880228241463FFC72920151BE0FB2A54
-:1045D000200BC0C09C240BAA092BA11C2C2415ABBA
-:1045E0009929A51C63FF9900C020D10FDA20DB3088
-:1045F000DC40DD50C0E0580875D2A0D10F000000AB
-:104600006C1004CB5513E0F625221F0D46110655FC
-:104610000CA32326221E25261F06440B24261E73C8
-:104620004B1DC852D240D10F280A80C04024261FFB
-:10463000A82828261E28261DD240D10FC020D10F21
-:10464000244DF824261E63FFD80000006C100428B7
-:104650002006D6206E85026000DE17E0D51DE0DC66
-:1046600019E0D5C0C1C0202A8CFC64A1322B6102A4
-:10467000B44E0B0B4C65B0A82B600C2A62000CB832
-:10468000110788082F828609B90A7FE30260009F1C
-:104690002992A368900509AA0C65A09328828564D5
-:1046A000808DB8891BE0DA94819B8065514DC0B73D
-:1046B000B838C0A1C0E009AE380E0E4264E0481A16
-:1046C000E0B81FE0B92FA67EB04A6DAA0500808829
-:1046D00000908CC0A02E600C0CE811A7882F82855A
-:1046E000ADEE0F4F0B2F86852B600622E4CF68B10D
-:1046F0002A296015C0B2C99AD2A02D61022B640686
-:104700000CDD022D6502D10FC0E008AE387EB0B7D7
-:1047100063FFAB00226406D2A0D10F00D2A0D10F5C
-:1047200000CC57DA60DB30DC4058089DC020D10F48
-:10473000DA6058092D63FFE80028221E29221D781F
-:104740009902280A00C176C1C1C1D21BE0A5C124CB
-:10475000AB6B6480437891402A80000CAF0C64F00E
-:10476000AE0DAE0C64E0A802AF0C64F0A207AE0C74
-:1047700064E09C2FACE864F0962EACE764E0902FE8
-:10478000ACE664F08A2A800708A80B088A027B83BB
-:10479000022A8DF8D8A065AFBBC0906000730000FE
-:1047A0002B600C0CB811A7882E82866EE87909BAA6
-:1047B0000A2AA2A368A0048E607AE96B2A82856423
-:1047C000A0651FE08DC0E32E64069EA19FA01FE0A0
-:1047D000B92E600A92A30FEE029EA28E600FEE0227
-:1047E0009EA42F60147AFF4722A417ADBE2F8285A6
-:1047F00022E4CF2FFC182F868563FE702A6C74C0CC
-:10480000B1DC90DD405807A31DE072C0C163FEC457
-:10481000D9A0DA60DB30DC40DD50C2F0C1E009FE37
-:10482000395807EAD2A0D10FDA605808EF63FEF0DA
-:104830002CA4170DBE0829828522E4CF299C1829B3
-:10484000868564500C2A6C74044B0258016BD2A00C
-:10485000D10FC020D10F00006C10062B221E282281
-:104860001D93107B8901C0B0C0C9C03BC1F20406D2
-:10487000401DE05BC0E2C0740747010E4E01AD2D44
-:104880009E11C0402E0A1464B06E6D084428221D8B
-:104890007B81652AB0007EA13B7FA1477B51207CB4
-:1048A000A14968A91768AA1473A111C09F79A10C26
-:1048B000C18B78A107C1AE290A1E29B4007CA12BA7
-:1048C0002AB0070BAB0BDAB07DB3022ABDF8DBA030
-:1048D000CAA563FFB428B01089116987BB649FB86B
-:1048E00063FFDC00647FB463FFD50000646FD0C059
-:1048F00041C1AE2AB40063FFC62B2102CEBE2A22DC
-:104900001D2B221E7AB12A8C107CB1217AB901C0EC
-:10491000B0C9B913E026DA2028B0002CB00703880C
-:104920000A28824CC0D10B8000DBA065AFE7D240E3
-:10493000D10F8910659FD463FFF300006C1008C08D
-:10494000D0C8598C302921020C0C4760000C8E30E5
-:104950000E1E5065E19E292102C0C116E015090B0B
-:104960004C65B0908A300A6E5168E3026000852F72
-:10497000629E1BE00E6EF8532BB22668B0052E2205
-:10498000007BE94727629DB748CB7F97102B200C0F
-:10499000B04E0CBF11A6FF29F2869E12798B4117EB
-:1049A000E00507B70A2772A368700488207789306A
-:1049B00029F285DF90D7906590652A210419E03CA3
-:1049C0007A9B22DA2058069F600029002C21041BC4
-:1049D000E0387CBB18DA20C0B658069AC958600186
-:1049E0004CC09063FFCCDA2058087F600006DA20C4
-:1049F000C0B658087D655135DC40DB308D30DA209B
-:104A00000D6D515806F2C0D0D3A064A12029210217
-:104A1000C05184A18CA00404470C0C4763FF3E00E6
-:104A2000C09C8831DBD008F850089B3828210498B6
-:104A3000116E8823282066AC8C0C0C472C24667CD5
-:104A4000BB159F139E148A108B115807028E148F6A
-:104A500013C0D02D24668A30C092C1C81BDFEC7F02
-:104A6000A6099BF099F12CF40827FC106550A4B816
-:104A70003ADF70C051C08007583808084264806728
-:104A800018DFC819DFC929867E6A420AD30F6DE98B
-:104A90000500A08800F08CC0A08930B4E37F962880
-:104AA000C0F207E90B2C94089B909F912F200C12C9
-:104AB000DFC80CF811A688298285A2FF2DF4CFD279
-:104AC000A009330B238685D10F22200C891218DF11
-:104AD000C00C2B11A6BBA8222D24CF2CB285D2A0AE
-:104AE0000C990B29B685D10FC087C0900A59387927
-:104AF000809663FF8ADB30DA20C0C1C0D05BFF56EE
-:104B0000292102C0D02A9CFE65AE4D2D2502C09001
-:104B100063FE45009E142A2C74C0B1DC70DD405841
-:104B200006DD8E14C0D01BDFB9C1C863FF6AC02088
-:104B3000D10F00006C100628210216DF9D08084CDA
-:104B400065821929629E6F980260022019DF9829F8
-:104B500092266890078A2009AA0C65A20F27629DF9
-:104B6000C0CC6472072B21048E31C0A0DDA00EFEE4
-:104B7000500ECD386EB8102C2066B1CC0C0C472CE2
-:104B800024667CDB026001EFC0C12930081BDF8A8C
-:104B900064909C2F0AFFC0D3B09E64E10268921318
-:104BA0006450882A2C74044B025800930AA202060F
-:104BB000000000002B200C2721040CBC11A6CC29DE
-:104BC000C286280A087983026001B919DF7A09B917
-:104BD0000A2992A36890082E220009EE0C65E1A430
-:104BE0002EC28564E19E26200713DF836E7B026060
-:104BF000019A17DF7A1FDF8319DFB0C0D228200A9D
-:104C000093E09DE1A9690F880298E22F90802A9491
-:104C100080B1FF07FF029FE32EC2851FDF6D0EDE0E
-:104C20000BAFBF2AF4CF2EC685655F76C020D10FAB
-:104C30002830102930112E301300993200ED3264E3
-:104C400080EE2A30141FDF9D00AA3278EF050F9EF8
-:104C5000092DE47F1EDF9B66A0050F98092A84803A
-:104C6000B4A718DF98C76F009104AE9EDDE000AFD7
-:104C70001A00C31A6EE1052DB2000DED0C1EDF9275
-:104C800008D81C063303AE882A848B2EB02E2784C6
-:104C90008C03EE010FEE022EB42E58018F63FEFF3F
-:104CA0002931082925042830142E3109B088648060
-:104CB000A32E240AC0812E30162CB4232E240BB42C
-:104CC000EF2F240C8C378B36292504DEB0DFC00C87
-:104CD0008F390B8E390FEE0264EEC4089F1101C4A8
-:104CE000048D380CB81800C4040CBE1800EE110E68
-:104CF000DD02C0E30EFF021EDF669F719E701EDFA5
-:104D0000658F2098739D7405FF110BCD53C180985A
-:104D1000750FDD020EDD029D721EDF242A24662F30
-:104D2000629D2AE4A22FFC182F669D63FE7100008D
-:104D3000002F30121BDF6600FA3278FF050B980B4C
-:104D40002A847F66D0050B9A0B2DA4802A3011008F
-:104D5000AA3263FF442F240A9E2B63FF56CC57DAF6
-:104D600020DB30DC4058070EC020D10F00DA20C015
-:104D7000B658079D63FFE500DA70580636C0A02AD2
-:104D8000246663FE02DA2058079863FFCFB16928D2
-:104D9000200A8620090947991129240798107F8144
-:104DA0002693E027E50A9AE388109DE119DF428DFA
-:104DB00011096F029FE42DE416098802C0D398E21E
-:104DC0002A240763FE5100001DDF0B0868118F11B4
-:104DD000892B93E008FF02C08F9FE50D990299E2AD
-:104DE000047F11C0D49DE108FF029FE463FFD0005F
-:104DF0006C1004C020D10F006C100485210D3811F7
-:104E000014DEE98622A42408660C962205330B934F
-:104E100021743B13C862D230D10FC030BC29992114
-:104E200099209322D230D10F233DF8932163FFE3E1
-:104E30006C100AD620941817DEDED930B8389819CD
-:104E40009914655252C0E1D2E02E61021DDEDB0EE4
-:104E50000E4C65E1628F308E190F6F512FFCFD658E
-:104E6000F1558EE129D0230E8F5077E66B8F181EF7
-:104E7000DF18B0FF0FF4110F1F146590CE18DF1567
-:104E80008C60A8CCC0B119DEC928600B09CC0B0D11
-:104E9000880929811C28811A2A0A0009880C08BA65
-:104EA000381BDF0B0CA90A2992947B9B0260008CB3
-:104EB0002B600C94160CBD11A7DD29D286B8487959
-:104EC00083026000D219DEBB09B80A2882A39817B2
-:104ED0006880026000A36000A51ADEFF84180AEE55
-:104EE00001CA981BDEB28C192BB0008CC06EB313B4
-:104EF0001DDEAF0C1C520DCC0B2DC295C0A17EDB6C
-:104F0000AE6000380C0C5360000900000018DEF1A0
-:104F10008C60A8CCC0B119DEA528600B09CC0B0DA4
-:104F2000880929811C28811A2A0A0009880C08BAD4
-:104F3000380CA90A2992947E930263FF72DA60C04A
-:104F4000BA58072964507360026600001ADE988C14
-:104F5000192AA0008CC06EA31A18DE940C1C5208EB
-:104F6000CC0B18DEDB2BC295C0A178B30263FF3FE8
-:104F700063FFC9000C0C5363FF09896078991829F5
-:104F8000D285C9922B729E1DDE896EB8232DD22642
-:104F9000991369D00B60000DDA6058071360001791
-:104FA0000088607D890A9A1A29729D9C129915CFF2
-:104FB00095DA60C0B658070C6551F58D148C18DB76
-:104FC000D08DD0066A020D6D51580580D3A09A1479
-:104FD00064A1DD82A085A1B8AF9F19050547020233
-:104FE000479518C05163FE602B6104C08C8931C0A5
-:104FF000A009F950098A386EB81F2C6066A2CC0C43
-:105000000C472C64667CAB119F119E1B8A155805BA
-:10501000918E1B8F11C0A02A64669F1164F0E12954
-:1050200012032812096DF9172F810300908DAEFE2F
-:105030000080889F9200908C008088B89900908CA6
-:1050400065514E8A10851A8B301FDE6B88122960DD
-:105050000708580A2C82942D61040ECC0C2C8694DF
-:105060006FDB3C1CDE95AC9C29C0800B5D50A29987
-:1050700009094729C48065D0DA2E600CC0D01FDE34
-:10508000540CE811AFEEA7882282852DE4CF0242AE
-:105090000B228685D2A0D10F8E300E0E4763FDA65F
-:1050A000A29C0C0C472C64077AB6CD8B602E600A4C
-:1050B000280AFF08E80C64810E18DE7E831682132E
-:1050C000B33902330B2C34162D350AC02392319F8D
-:1050D00030C020923308B20208E80292349832C0FD
-:1050E000802864072B600CD2A01CDE390CBE11A7EF
-:1050F000EE2DE285ACBB28B4CF0D9D0B2DE685D1FE
-:105100000F8B1888138D30B88C0D8F470D4950B414
-:10511000990499100D0D5F04DD1009FF029F800DA9
-:10512000BB029B8165508D851AB83AC0F1C0800CD6
-:10513000F83808084264806B1BDE1A19DE1B29B69A
-:105140007E8D18B0DD6DDA0500A08800C08CC0A08F
-:1051500063FEF30082138B161DDE2B28600AC0E06D
-:105160002EC4800D880202B20B99239F20C0D298D2
-:10517000229D2122600CB2BB0C2D11A7DD28D28507
-:1051800008BB0B18DE132BD685A8222E24CFD2A065
-:10519000D10F9E1B851A2A6C748B185BFF178E1B10
-:1051A00063FEA300C087C0900AF93879809263FF3C
-:1051B00086C020D10F9E1B2A6C74C0B18D18580573
-:1051C000358E1B851A63FE7E886B8213891608BE96
-:1051D000110ECE0202920B9E25B4991EDE069F2070
-:1051E0000E88029822C0EF04D8110E88029824C0BD
-:1051F000E49E21C080D2A02B600C2864071CDDF443
-:105200000CBE11A7EE2DE285ACBB28B4CF0D9D0BD3
-:105210002DE685D10F0000006C1004C020D10F00D6
-:105220006C10048633C071C030600001B1330031AE
-:105230000400741A0462017460F1D10F6C1004024E
-:105240002A02033B025BFFF61CDDDC1BDE24C79F4A
-:1052500088B009A903098A019AB079801EC0F00FAD
-:10526000E4311DDDD30002002BD2821EDE1D2AC1D7
-:10527000020EBB022BD6820AE431D10F28C102C133
-:105280009009880208084F28C50208E431D10F00B0
-:105290006C1004C0C00CE43112DDC81ADDC5000278
-:1052A0000029A28218DE111BDE0F2621020B9901B4
-:1052B00008660129A68226250206E43114DE0C15B3
-:1052C000DE07236A902326128550242611252613F3
-:1052D000222C40D10F0000006C1008D6102B0A645D
-:1052E000291AB41ADDB20D23111CDDB30F2511B834
-:1052F0001898130E551118DDFEAC55A838AA332C9A
-:1053000080FF2A80FEA933288D0129800108AA1177
-:105310002880000CAA0208881109880208AA1C2803
-:105320008C0828160458084C14DDA40AA70224414E
-:10533000162A30802B120407AA28580847B1338B4D
-:1053400013B4559A6004AC28B4662C56277B69E0E8
-:1053500016DDDB9412C050C0D017DD979D15D370B9
-:10536000D4102F60802E60829F169E178816728937
-:105370001A8D128C402A607F0DCC282B3A200CAA63
-:1053800028580835C0B10ABE372E35408F1772F93C
-:105390001A8D128C402A60810DCC282B3A200CAA41
-:1053A0002858082DC0B10ABE372E3542B233B44456
-:1053B000B1556952B6B466C0508F15B877D370B284
-:1053C000FF9F156EF899D10F6C1004C021D10F000A
-:1053D0006C1004270A001CDD761FDD871EDD8A1D88
-:1053E000DD731ADDB51BDDC3C02824B0006D2A753E
-:1053F000AA48288080C09164806100410415DD6E58
-:10540000C03125502E00361A0655010595390C5627
-:10541000110C66082962966E974D0D590A2992243F
-:1054200068900812DDA702420872993B2362951228
-:10543000DD6BCB349F300282020E4402C092993160
-:1054400094329233AD52246295C090244C1024665D
-:105450009524B0002924A0AA42292480B177B14420
-:1054600004044224B400D10FD10FD10F6C10041AE0
-:10547000DD4F2AA00058021C5BFFD5022A02033B25
-:10548000025BFFD11BDD4DC9A12CB102C0D40DCCF4
-:10549000020C0C4F2CB5020CE431D10FC0A00AE471
-:1054A0003118DD430002002F828219DD562EB10231
-:1054B00009FF022F86820EE431D10F006C1004C068
-:1054C0002002E43114DD3D16DD3A00020022628242
-:1054D000234102732F0603E431C020D10F19DD8769
-:1054E0001ADD862841020A2A010988012A668228D3
-:1054F000450208E43115DD7D12DD8225461DD10F00
-:105500006C1004292006289CF96480A02A9CFD6563
-:10551000A0968A288D262F0A087AD9042B221FC824
-:10552000BD2C206464C0812E22090EAE0C66E0788A
-:105530002B200C1EDD1F0CBC11AECC28C28619DD41
-:105540001D78F3026000AD09B90A2992A36890089A
-:105550002E220009EE0C65E09B29C2851FDD276421
-:1055600090929F90C0E41FDD349E9128200AC0E0F5
-:105570009E930F8802989288200F880298942F207B
-:10558000079A979D962F950A2E24072820062920F2
-:105590006468833328C28512DD0E288C20A2B22EC7
-:1055A00024CF28C685C020D10FC020D10F2A206A61
-:1055B0000111020A2A4165AF52DA20C0B05805D164
-:1055C00064AFE5C021D10F00649FC81FDCFB2D2014
-:1055D000168FF209DD0C00F10400DD1AADAD9D2936
-:1055E00012DCFC28C285A2B22E24CF288C2028C62B
-:1055F00085C020D10FC021D10F0000006C100426FF
-:105600000A001BDD4015DCEC28206517DCE9288C3E
-:10561000FE6480940C4D110DBD082CD2F52BD2F4F4
-:105620002ED2F77CB13DB4BB2BD6F47BE9052BD24F
-:10563000F62BD6F47CB92C2AD2F62AD6F52AD6F443
-:1056400006E4310002002872822AFAFF0041042990
-:105650000A012F510200991A0A9903098801287634
-:10566000820FE4312624652BD2F48E5A2CD2F5B069
-:10567000EE9E5A7BCB1629D2F62FD2F70CB80C0926
-:10568000FF0C08FF0C0F2F14C8F96000320BCA0C76
-:105690000A2A14CEA92B5102C0C20CBB020B0B4F1D
-:1056A0002B55020BE431D10F00DB30DA205BFF9485
-:1056B0001BDD1564AF5D0C4D11ADBD63FFA800008F
-:1056C00006E4310002002F728218DCD42E51020849
-:1056D000FF022F76820EE431D10F00006C1004C05F
-:1056E0003003E43116DCB315DCB40002002462821E
-:1056F00074472118DD05875A084801286682CD7352
-:1057000019DD030C2A11AA9922928329928472919D
-:10571000038220CC292B51020BE431C020D10F0091
-:105720001FDCFC2E51020FEE012E55020EE431B0AB
-:105730002DB17C9C5A12DCF708DD112D5619D10FC2
-:105740006C10061BDC9A1EDC9C22B0001ADCF36F86
-:1057500023721DDCDAC04818DCF21FDCF0DC10D547
-:10576000C083F000808600508A6D4A4F0F35110DBE
-:1057700034092440800B560A296294B1330E55092E
-:105780002251400F44110C440A874009A80C02889A
-:105790003622514107883608770CA89929669497D4
-:1057A00040296295874109A80C0288360788360887
-:1057B000770CA8992966959741030342B1380808E8
-:1057C0004298F0D10F1CDCD713DCD827B00023326D
-:1057D000B5647057C091C0D016DCD615DCD4C0407B
-:1057E0002AC00003884328C4006D793C004104B1FD
-:1057F0004400971A7780148E502FB2952DB695AF2E
-:10580000EE2EED2006EE369E5060001877A009833C
-:10581000509D5023B69560000223B295223D20068C
-:10582000223622B695B455B8BBD10F000388432861
-:10583000C400D10F6C1004C04004E43115DCBE007C
-:105840000200885013DCBDCB815BFFBD1CDCBC0CAF
-:105850002D11ADCC2BC2822AC28394507BAB142E67
-:10586000C28429C2850ABD0C0E990C0D990C092918
-:10587000146000050BA90C092914993015DC4F2A76
-:1058800051020AE4312A2CFC58004B2B32000AA2A8
-:10589000022BBCFF9B30CCB6C8A4D2A0D10F000015
-:1058A00004E4311EDC430002002DE2822FBAFF2CFB
-:1058B00051020FDD012DE6820CE431D10F00000012
-:1058C0006C1004D10F0000006C1004C020D10F0038
-:1058D0006C100413DC9BC0D103230923318DC0A0BD
-:1058E0006F340260008D19DC321BDC3317DC940C42
-:1058F0002811A8772672832572822CFAFF765147E9
-:1059000088502E7285255C0425768275E9052572FE
-:10591000842576827659292E72842E76822E76837D
-:105920000AE4310002002392820021042FB1020018
-:10593000D61A0C66030633012396820FE4312672D1
-:105940008325728260000200D8A07659220AE431D1
-:1059500000020023928200210400D21A2FB1020C0F
-:1059600022030232012296820FE431D280D10F004D
-:10597000D280D10FC020D10F6C1004DB30862015EF
-:10598000DC0B280A00282502DA2028B0002CB007FA
-:1059900005880A28824C2D0A010B8000DBA065AF28
-:1059A000E61ADC040A4A0A29A2A3C7BF769101D1EC
-:1059B0000F2BA6A3D10F00006C1004C0D1C7CF1BC2
-:1059C000DBFE19DBFB17DBF90C2811A87786758540
-:1059D00074C0A076516288508E77B455957475E97D
-:1059E00003857695747659278F769F759F740AE4A0
-:1059F00031000200239282B42E2FB10200E1040094
-:105A0000D61A0C66030633012396820FE43186759D
-:105A100083747639280AE4310002002E9282B4227F
-:105A200000210424B10200DF1A0CFF030FEE012E47
-:105A3000968204E431D280D10FD8A07651D6D2809C
-:105A4000D10F00006C1004290A801EDC001FDC004E
-:105A50001CDBD80C2B11ACBB2C2CFC2DB2850FCC35
-:105A6000029ED19CD0C051C07013DBFC14DBFB182C
-:105A7000DBF92AB285A82804240A234691A986B80E
-:105A8000AA2AB685A98827849F25649FD10F000084
-:105A90006C100419DC2C0C2A11A9A98990C48479F2
-:105AA0008B761BDC1AABAC2AC2832CC2847AC16809
-:105AB0008AA02BBC30D3A064A05E0B2B0A2CB2A30F
-:105AC00019DBE568C0071DDC20D30F7DC94AA92971
-:105AD000299D0129901F68913270A603D3A0CA9E08
-:105AE000689210C7AF2AB6A32A2CFC5BFFB3D23052
-:105AF000D10F000013DBC503A3018C311DDBB60CF5
-:105B00008C140DCC012CB6A363FFDC00C020D10F98
-:105B1000DA205BFFCCC020D10FC020D10F000000E5
-:105B20006C1004DB30C0D019DBA1DA202830002251
-:105B3000300708481209880A28824CDC200B8000B4
-:105B40001BDB9C0C4A11ABAA29A28409290B29A6AC
-:105B500084D10F006C1004C04118DB9517DB970C43
-:105B60002611A727277030A866256286007104A336
-:105B70005500441A75414822628415DBB802320B85
-:105B8000C922882117DB940884140744017549054C
-:105B9000C834C020D10FD10F0809471DDBEBC0B2BC
-:105BA0008E201FDB820E0E43AFEC2BC4A00FEE0A3B
-:105BB0002DE6242A6284C0200A990B296684D10F1D
-:105BC000C020D10F6C1004DB30C0D018DB78DA2095
-:105BD00025300022300708580A28824CDC200B8030
-:105BE000008931709E121BDB720C4A11ABAA29A2EC
-:105BF0008409290B29A684D10F09C95268532600AC
-:105C0000910418DB6DC0A12F811200AA1A0AFF02AD
-:105C10002F85121EDB670C4D11AEDD2CD2840C2CAF
-:105C20000B2CD684D10FC0811FDB64B89A0A0A47B7
-:105C30002EF11200A10400881A08EE022EF5121DA2
-:105C4000DB5C0C4C11ADCC2BC2840B2B0B2BC68414
-:105C5000D10F00006C1004DB30C0D019DB54DA2007
-:105C600028300022300709880A28824CDC200B806B
-:105C7000001CDB4F0C4B11ACBB2AB2840A2A0B2A46
-:105C8000B684D10F6C1004C04118DB4916DB4B0CF5
-:105C90002711A626266030A872252286006104A35B
-:105CA0005500441A75410822228402320BD10F009C
-:105CB000C020D10F6C100415DBA502491429561120
-:105CC0002452120208430F8811C073008104003669
-:105CD0001A008104C78F00771A087703074401066A
-:105CE0004402245612D10F006C10066E230260008D
-:105CF000AC6420A7C0A0851013DB7E16DB94C040E7
-:105D0000A6AA2BA2AE0B194164906668915D6892B9
-:105D10005268933C2AA2AA283C7F288C7F0A0A4D0D
-:105D20002980012880002AACF208881109880275B0
-:105D300089462B3D0129B0002BB0010899110B9920
-:105D4000027A9934B8332A2A00B1447249B160000A
-:105D50004A7FBF0715DB7F63FFB90000253AE86380
-:105D6000FFB10000253AE863FFA90000250A64633B
-:105D7000FFA1C05A63FF9C0000705F082534FF0537
-:105D80008C142C34FE70AF0B0A8D142E3D012AE4C6
-:105D9000012DE400DA405BFD5063FFA7D10FD10F66
-:105DA0006C10041ADB0519DB021CDB6A1BDB6BC001
-:105DB00080C07160000D00000022A430B1AA299CAF
-:105DC000107B915F26928679C2156E6262C0206D4B
-:105DD000080AB12200210400741A764BDB63FFEE3F
-:105DE0002292850D6311032514645FCFD650032DD5
-:105DF000436DD9039820B4220644146D492298209B
-:105E000098219822982398249825982698279828AE
-:105E10009829982A982B982C982D982E982F222CD8
-:105E20004063FF971EDAE327E68027E681D10F0063
-:105E3000C02063FF830000006C1004C062C04112E8
-:105E4000DADE1ADADA13DB452AA00023322D19DB59
-:105E50003F2BACFE2992AE6EA30260008E090E406D
-:105E60002D1AC2C2CD0EDC392C251664B0895BFF19
-:105E70009E15DB3B1ADAE52B3AE80A3A015805761B
-:105E80002B21160ABB28D3A02B560058058D8B500A
-:105E90000ABB082A0A0058058C15DB322D21022C7A
-:105EA0003AE80C3C2804DD022D25029C505805845C
-:105EB0008B50AABBC0A15805841CDB2B2D21020CE2
-:105EC0003C2806DD0213DB292D25029C3058057C79
-:105ED0008B30AABBC0A258057C2A2102C0B40BAAF1
-:105EE000020A0A4F2A2502580590D10F242423C301
-:105EF000CC2C251663FF760018DB211CDB1D19DB7B
-:105F00001E1BDB1C17DAF085202E0AFD1FDB1D2D62
-:105F1000202E24F47A24F47E24F4820EDD0124F46D
-:105F2000862E0AF707552806DD02C0750EDD01052D
-:105F30000506AB5BA959C0E8AC5C24C4AB0EDD021E
-:105F400027C4AC2E0ADFA85527B4EC0EDD0124B41B
-:105F5000EBC2E027942C0EDD0224942B2E0A800D38
-:105F60000D4627546C24546B0EDD022D242E63FE47
-:105F7000FC0000006C10042A0A302B0A035BFF4D62
-:105F800012DAF3C390292616C3A1C0B3C08A28260B
-:105F9000175BFF48C03CC3B12B26161ADA872AA02C
-:105FA0002023261764A079C3A2C0B15BFF42C3A21D
-:105FB000C0B15BFF40C3C22C2616C2AFC0B12326BE
-:105FC000175BFF3CC28F282616C0FE2F2617C2E2A1
-:105FD0002E26162A0AA1C0B1C0D82D26175BFF3580
-:105FE0002A0AA12A2616C3A6C0B3C1922926175B86
-:105FF000FF31C3C62C2616C1B32A0AA22B2617C00E
-:10600000B35BFF2C290AA2292616C185282617C2B0
-:10601000FB2F2616C0E72E26171DDADA2D2610D103
-:106020000FC3A2C0B35BFF2363FF82006C10041C8C
-:10603000DAA41BDA9118DAD417DAD516DAD515DA1C
-:10604000D5C0E0C0D414DAA01FDA5CC0288FF06D90
-:106050002A36DAC0D9C07C5B020FC90C1CDA9A0C54
-:106060009C28A8C3A6C22A36802A2584A4C2A7CC0D
-:106070002D248C2B248A2B24872E248BB1BB2E36E7
-:106080009F2C369E2C369DB1AC1CDA7B1BDAC3C02C
-:10609000286D2A33DAC0D9C07C5B020FC90C1CDA28
-:1060A000890C9C28A8C3A6C22A36802B2584A4C2AA
-:1060B000B1BBA7CC2D248C2E248B2A248A2E369F6C
-:1060C0002C369E2C369DB1ACC07919DA791BDAB525
-:1060D00013DAB31ADAB318DAB414DA7A16DAB404C3
-:1060E000F42812DAB304660C040506A252A858AAD2
-:1060F0005AA3539B3029A50027848AC091C0A52AA2
-:10610000848C29848B17DAAC18DAABA75726361D96
-:1061100026361E2E361F16DAA913DAA9A655043321
-:106120000C2826C82E75002D54AC2E54AB2E54AA24
-:106130002326E62326E52E26E7D10F006C10061352
-:10614000DA8717DA8224723D2232937F2F0B6D0893
-:10615000052832937F8F0263FFF3C0C4C0B01ADA00
-:1061600016C051D94004593929A4206E44020BB5F8
-:1061700002C3281EDA11DDB025E422052D392DE4F5
-:1061800021C0501EDA9019DA8018DA8016DA821DE2
-:10619000DA8E94102A724517DA4C6DA94BD450B39D
-:1061A000557A5B17DF50756B071FDA038FF00F5FAF
-:1061B0000C12DA4402F228AE2222D681D54013DA3C
-:1061C00041746B0715D9FD855005450C035328B163
-:1061D00045A73FA832A93322369D22369E24368019
-:1061E0002B369F2BF48B2CF48C14DA5C24424DC09C
-:1061F00030041414C84C6D0806B133041414C8429A
-:1062000063FFF20015D9EAC4400031041AD9EBC08B
-:10621000D193A200DD1AC138B0DD9DA318DA502B4E
-:10622000824D29824E29A51C2882537A871E2C5420
-:10623000008E106FE45D12D9E02F211D23211C2F49
-:10624000251B04330C23251C23251AD10FC06218EB
-:10625000DA3F88807E87D989102654006F94191BF5
-:10626000D9D62AB11C0A1A1404AA0C2AB51C2AB5BC
-:106270001D2AB51A2AB51BD10F1BD9CF2AB11C0A6A
-:106280001A1403AA0C2AB51C2AB51D2AB51A2AB558
-:106290001BD10F001CD9C92BC11D2DC11C2BC51B27
-:1062A00003DD0C2DC51C2DC51AD10F006C1006196D
-:1062B000D9C214DA2612DA2915DA44C73FC0E02E13
-:1062C00056A82E56A92E56AA2E56AB23262918D9E3
-:1062D000EADB101CDA3EC0D42A42452D16019C1080
-:1062E00000B0890A880C2896005BFF942B22E318E3
-:1062F000D9B20B5B149B842A22E48B84B1AA0A5A7C
-:10630000140BAA0C9A852922E509591499862F2283
-:10631000CD0F5F149F875BFF455BFF1623463BC194
-:10632000B01DD9A51CDA032AD1022C463A0BAA02C9
-:106330000A0A4F2AD50258047C5BFEBF5BFE98C058
-:1063400050C0B016D99B14D9A317DA12C0C0C73EEB
-:1063500093122C262DC0306000430000007F9F0F59
-:10636000B155091914659FF4C0500AA9027FA7EF1F
-:1063700018D98FDA5008580A28822C2B0A000B8073
-:1063800000005104D2A0C091C7AF00991A0A990326
-:106390009912CE33642067D3202B200795138C12DB
-:1063A0002A62827CA85F18D98108580A28822CDAD0
-:1063B000500B8000D2A0643FDA8A310A8A1404AA02
-:1063C00001C8298B210B8B1404BB017BA945DDA0DF
-:1063D0007A7B081DD9792DD2000DAD0CDB3019D98F
-:1063E000731AD9B82812030ADA28088C021DD9F5C5
-:1063F00009880A28823C0DAA080B8000652F97D3D4
-:1064000020C0B063FF97CB53B1550050040A09195F
-:1064100063FF4900DAB07B7B071AD9678AA00ABA02
-:106420000C1BD9A88C310BAB280C8A141CD9E6ACF8
-:10643000BB1CD9E504AA012BC68163FF907FA7C7C7
-:1064400063FF62006C100427221EC08008E4311B29
-:10645000D9580002002AB28219D958003104C0610B
-:1064600000661A2991020A6A022AB68209E43115E5
-:10647000D9B30C3811A8532832822432842A8CFCD8
-:106480007841102921022A368297A009690229251C
-:1064900002D10F002B21022C32850B6B022CCCFC7D
-:1064A0002C368297C02B2502D10F00006C1004C03F
-:1064B000E71DD93B1CD93D0D4911D7208B228A20DD
-:1064C0000B4B0BD2A007A80C9B72288CF4C8346F1E
-:1064D0008E026000A21FD933A298AF7B78B334C973
-:1064E0003DC081C0F0028F380F0F42C9FA2CD67E12
-:1064F000D5206D4A0500308800508C8870089808B7
-:1065000078B16CD2A09870D10FC0F0038F387FE0C3
-:10651000DE63FFD8027B0CAFBB0B990C643046D80E
-:1065200030C0F1C05002F5380505426450792CD6D0
-:106530007E0B36122F6C100F4F366DFA05008088D7
-:1065400000208C06440CC081250A0003B208237C7D
-:106550000C0385380505426450592CD67E6D4A05DA
-:1065600000208800308CD2A0A798BC889870D10FEA
-:10657000D2A0BC799970D10FD2302BAD08C0F1C038
-:10658000500BF538050542CB552CD67E083F14C17B
-:10659000600F660C064636D30F6D6A050020880032
-:1065A000B08C827063FF2D00C05003F53875E08019
-:1065B00063FF7A00C06002863876E0A063FF9A002D
-:1065C000C05003F53875E0C363FFBD006C1004D6FE
-:1065D0002068520F695324DA20DB30DC405800F089
-:1065E000D2A0D10FDA20DB30DC405800ED9A242411
-:1065F000240EC02122640FC020D10F00B83BB04C44
-:106600002A2C7489242D200E2E200FA4DDB1EE2E0D
-:10661000240FB0DD2D240E2890072D9003A488B000
-:1066200088B1DD2D94032894075BFFA069511DC03C
-:10663000E082242A600F18D9662A240329600E8F6D
-:106640002029240708FF029F209E64D10FC020D17B
-:106650000F0000006C1004942319D95EC0B3083AEF
-:10666000110BAA02992019D8D29A2116D8D0C0505D
-:1066700028929D2564A2288C1828969DD10F000091
-:106680006C1004282066C038232406B788282466A6
-:10669000D10F00006C1006035A0C0D36110D5C1161
-:1066A000D8208B2282210CBB0C06550F9B82023214
-:1066B0000B928113D8BCD920A38F6450531CD8B837
-:1066C000C0D71BD8B9A256C0E1290A0004E938098D
-:1066D000094276F34A044302C99E2BC67E6DAA0581
-:1066E00000208800308C8981A95909FA0C64A079AE
-:1066F00099818A82C8ADD290D10FC06002E6387607
-:10670000D0DA63FFD4C020BC89998199809282D16C
-:106710000F7F2304292DF8998165BFD963FFE50018
-:10672000028F0CA3FF0F3312931003AA0CD340CB9C
-:106730009E2BC67E86106D6A0500208800308CBCBA
-:1067400082290A0004F308240A010349380909428E
-:10675000CA982BC67E6DAA0500208800308C0F5980
-:106760000CA989BC99998163FF87BC89998163FFD2
-:1067700080C06002E63876D0BA63FFB4C0700247CA
-:106780003877D0D063FFCA006C100414D895C1527A
-:10679000A424CA3028221D73811B292102CD952AE9
-:1067A000300075A912DA20033B022C30072D0A02B3
-:1067B0005801C2653FDDD10F2B300703BB0BDAB0A8
-:1067C00074B3022ABDF8D3A063FFC6006C1004297D
-:1067D0002006C0706E9741292102C08F2A2014C064
-:1067E000B62B240606AA022A241479800227250241
-:1067F0002A221E2C221D7AC10EC8ABDA20DB302CD7
-:106800000A00033D025BF8146450752D21020D0D42
-:106810004CC9D3C020D10F00002E9CFB64E0822F16
-:1068200021020F0F4C65F0911AD8621CD86029A282
-:106830009EC08A798B5D2BC22668B0048D207BD9DF
-:106840005229A29DC0F364904A97901DD8732E21BF
-:10685000049D9608EE110FEE029E979E9118D86F38
-:10686000C0E527C4A22E24062BA29D2F21022BBCFB
-:106870003008FF022F25022BA69DC020D10F00005B
-:10688000002F300068F938DA20DB30DC4058004453
-:1068900063FF7700022A022B0A065800D3220A005F
-:1068A000D10F655010283000688924022A02033B6A
-:1068B00002DC4058003BC020D10FD270D10F000045
-:1068C0002A2C74033B02044C025BFEF863FF3B007E
-:1068D000DB30DC402A2C745BFEF5C020D10F0000B9
-:1068E0006C1004C83F89268829A399992609880C29
-:1068F000080848282525CC52C020D10FDB402A2C7F
-:10690000745BF93DD2A0D10F6C1004D820D730822F
-:10691000220D451105220C928264207407420B134C
-:10692000D821D420A383732302242DF885807451A9
-:106930004CBC82C0906D081600408800708C77397E
-:1069400003D720C0918680743901D420746102631A
-:10695000FFE2CA98C097C0411BD8A0C0A00B8B0C07
-:106960000B4A380A0A42C9AA1DD80E1CD80F2CD6C9
-:106970007EC140D30F6D4A0500208800308C97807F
-:10698000D270D10FBC8FC0E00F4E387E90E263FF13
-:10699000D6BC8292819280C0209282D10F000000EA
-:1069A0006C1006C0D71CD7FE1BD8000D4911D7208C
-:1069B0002E221F28221D0E4E0BD280078A0C2E7607
-:1069C0001F2AAC80C8346FAE026000CB2F0A801A39
-:1069D000D804A29EAA7A7EA33FC93FC0E1C050025C
-:1069E000E538050542CA552BC67EDB20D30F6D4A1C
-:1069F0000500308800B08C2E721DAE9E0EA50C6472
-:106A00005086D2802E761DC091298403D10FC050AC
-:106A100003E53875D0D363FFCD15D7F1027E0CA501
-:106A2000EE643051C0A1250A0002A538033A0205E0
-:106A300005426450922BC67E0E35129510255C10CF
-:106A4000054536D30F6D5A0500A08800208CC0A1E3
-:106A5000A3E2C05023FA8003730C03A538AF73057B
-:106A600005426450722BC67E851005450C6D5A0593
-:106A700000208800308CD280C0A10E9B0CAB7BAF75
-:106A8000BB2B761D2A8403D10FD280C0C1AF7D2DD0
-:106A9000761D2C8403D10F00D2302E8D08C0F1C09A
-:106AA000500EF538050542CB592BC67E0A3F14C15E
-:106AB000600F660C064636D30F6D6A05002088000D
-:106AC000E08C22721D63FF03C061C05003653875FE
-:106AD000D80263FF6263FF5CC05002A53875D0879F
-:106AE00063FF8100C06003F63876D0BF63FFB90052
-:106AF0006C10042A201529201614D7AF0A990CCB44
-:106B00009D2E200B04ED092BD11C8F2809BC36AC1F
-:106B1000AA0CBB0C2BD51C0A0A472A2415CAAF8B1A
-:106B2000438942B0A800910400881AA8FF0FBB0255
-:106B30009B278F260FB80C783B1AC020D10F00007E
-:106B4000292102C0A20A9902292502C021D10F00E1
-:106B50008B2763FFDC2BD11C0CAA0C0A0A472A24C2
-:106B600015ACBB2BD51CC9AE8B438C288F42B0AD66
-:106B700000F10400DD1AADCC0CBB029B27DA20B774
-:106B8000EB580019C021D10F9F2763FFEF000000D1
-:106B90006C100428203C64304705306000073E013B
-:106BA000053EB156076539054928C77FA933030655
-:106BB00041076603B166060641A6337E871E222181
-:106BC00025291AFC732B1502380C09816000063E3A
-:106BD00001023EB12406423903220AD10FD230D13C
-:106BE0000FC05163FFC000006C100427221EC0803C
-:106BF00008E4311DD76F0002002CD2821BD76F0032
-:106C00003104C06100661A2BB1020C6C022CD682D2
-:106C10000BE43119D7F20C3A11AA932832829780EB
-:106C2000253282243284B45525368275410A2921C1
-:106C300002096902292502D10F2A21022B32830A77
-:106C40006A022B36822A2502D10F00006C1004192B
-:106C5000D76327221EC08009770208E4311DD7546C
-:106C60000002002CD2821BD754003104C0610066A0
-:106C70001A2BB1020C6C022CD6820BE43119D7D737
-:106C80000C3A11AA932832829780253282243284CA
-:106C9000B45525368275410B2A21020A6A022A253B
-:106CA00002D10F002B21022C32830B6B022C368277
-:106CB0002B2502D10F0000006C10041BD73D0C2ABD
-:106CC00011ABAA29A286B438798B221BD73A19D7DF
-:106CD000610B2B0A2BB2A309290868B00274B90D05
-:106CE000299D0129901F6E920822A285D10FC020F4
-:106CF000D10FC892C020D10FDA205BEF35C020D170
-:106D00000F0000006C100414D72A28429E19D727C0
-:106D10006F88026000BA2992266890078A2009AA23
-:106D20000C65A0AC2A429DC0DC64A0A42B200C19E9
-:106D3000D7210CBC11A4CC2EC28609B90A7ED3027D
-:106D400060009A2992A36890078D2009DD0C65D018
-:106D50008C25C2856450862D2104C0306ED80D2C40
-:106D60002066B8CC0C0C472C246665C07B1CD79CD5
-:106D700018D7281AD71E19D72F1DD724C0E49E5123
-:106D80009D508F209357935599539A569A5408FFC4
-:106D9000021AD73A9F5288269F5A9E599D58935E51
-:106DA0009C5D935C9A5B080848058811985FC0D881
-:106DB0001FD7080CB911A499289285AFBF23F4CF2F
-:106DC000288C402896858E262D24069E29C020D109
-:106DD0000FCA33DA20C0B65BFF84C72FD10FC93A80
-:106DE000DA205BFF81C72FD10FDBD05BFE1A232493
-:106DF000662B200C63FF7500C72FD10FC72FD10F53
-:106E00006C1004C85B29200668941C689607C02093
-:106E1000D10FC020D10FDA20DB30DC40DD502E0A4C
-:106E2000005BFE6AD2A0D10F2E200C18D6E10CEF29
-:106E300011A8FF29F286C088798B751AD6DE0AEA76
-:106E40000A2AA2A368A0048B207AB96423F285647D
-:106E5000305E1CD6E82A0A802D2068292067282168
-:106E6000040B991104881109880208DD02C09428D6
-:106E70004A1008DD0218D6E0993198308B2B9A37EA
-:106E80009D340CBB029B32C0C09C359C362A2C74AE
-:106E9000DB40C0D318D6CF29F285A8EE299C202C40
-:106EA000E4CF29F6852D2406DD405BFDFAD2A0D182
-:106EB0000FDA20DBE05BFF4CC020D10F6C100AD64C
-:106EC000302A2006941128ACF86583872B2122C034
-:106ED000F22A21246550082AAC010A0A4F2A2524E7
-:106EE0007ABB0260037F2C21020C0C4C65C3192E67
-:106EF00022158D32C0910EDD0C65D39088381ED6D8
-:106F0000AC64836B8C37C0B8C0960CB9399914B493
-:106F10009A9A120D991199138F6718D6A7C9FB2851
-:106F200080217F83168B142C22002A200C5BFF62A9
-:106F3000D4A064A3A88F6760002800002B200C89D0
-:106F4000120CBA11AEAA2CA2861DD69A7C9B3E0DBD
-:106F5000BD0A2DD2A368D00488207D893024A28563
-:106F600064436427212E07F73607F90C6F9D01D77C
-:106F7000F0DA20DB70C1C42D211F5BFF0589268854
-:106F800027DDA009880C7A8B179A10600006C04094
-:106F900063FFCC0000DA208B105BFED58D1065A25C
-:106FA00067C0E09E488C649C498B658A669B4A9AC0
-:106FB0004B97458F677F7302600120CD529D10DA99
-:106FC00020DB302C12015BFE768D10C051D6A08FD5
-:106FD000A7C0C08A68974D9A4C8869896A984E996B
-:106FE0004F8E6A8A69AE7E77EB01B1AA9E6A9A6972
-:106FF0008B60C0A00B8E1477B701C0A1C091C08474
-:1070000093159D179516C0D025203CC03008580117
-:10701000089338C082083310085B010535400B9D8A
-:107020003807DD100BAB100E19402A211F079910ED
-:1070300003DD020DBB020553100933020A55112965
-:1070400021250A2A140929140499110A99020933DD
-:10705000028A2B2921040BAA021BD6E208991109E6
-:1070600055020855020BAA029A40892088140899F3
-:107070001109880219D6631DD6DC09880298418B54
-:107080002A9346954783150DBB0285168D179B44A1
-:107090008A658966AACAA97C77CB01B1AA07FB0CCD
-:1070A0009C669A6588268E29AD87972607EE0C0E7A
-:1070B0000E482E25259B672B200C87131ED63D0CD2
-:1070C000B911AE99289285A78828968517D641C010
-:1070D00090A7BB29B4CF871863FE3C008C60C0E04A
-:1070E000C091C0F0C034C0B82A210428203C08AAAE
-:1070F000110B8B01038301039F380B9B39C03208AE
-:10710000FF10038801089E380C881407EE100FEE5C
-:107110000203880108983905BF1029211F0ABB11F5
-:1071200007881008FF020BAA0218D6350929140394
-:10713000AA022B212583200B2B1404BB1108331129
-:107140000FBB020B99028B148F2A0B3302083302F8
-:107150008B2B6470868868974D984C8769886A93F2
-:10716000419946974E984FC07077C701C0719A47B2
-:1071700018D69E0B7C100CEC0208F802984418D626
-:107180009B0CBC0208CC029C402A200C295CFEC04F
-:10719000801FD6071CD60F0CAE112B2124ACAAAF32
-:1071A000EEB0BB8F132CE28528A4CFAFCC2CE685A4
-:1071B0002A22152B2524B1AA2A26156490DBC9D2D0
-:1071C0008F262E22090DFF082F26060FEE0C0E0E1D
-:1071D000482E25256550E4C020D10F00C070934192
-:1071E0009F4499469A4777C70A1CD5F32CC022C002
-:1071F000810C87381CD67F0B781008E80208B8028B
-:107200000C8802984063FF8000CC57DA20DB608C4A
-:10721000115BFDE3292102689806689403C020D120
-:107220000F2B221EC0A029221D2A25027B9901C0F6
-:10723000B064BFE813D5DE2CB00728B000DA200315
-:10724000880A28824CC0D10B8000DBA065AFE763C1
-:10725000FFCA000068A779DA20DB30DC40DD505B34
-:10726000FEE8D2A0D10FC16DC19D29252C6000047C
-:1072700029252CD6902624672F2468DA20DB308C31
-:1072800011DD502E0A805BFD51D2A0D10FC168C123
-:10729000A82A252C63FFDD000000C8DF8C268B297F
-:1072A000ADCC9C260CBB0C0B0B482B25252A2C7433
-:1072B000DB602C12015BFD94D2A0D10F2A2C748BC1
-:1072C000115BF6CDD2A0D10FDA205BFE4763FF3809
-:1072D00000DA20C0B15BFE8B65AF2D63FBEDDA20D9
-:1072E0002B200C5BFE5A63FF1F00000012D6428267
-:1072F00020028257C82163FFFC12D63E03E8300407
-:10730000EE3005B13093209421952263FFFC0000FC
-:1073100010D63A910092019302940311D611821073
-:1073200001EA30A21101F031C04004E4160002006D
-:1073300011D6338210234A00032202921011D5FD88
-:10734000C021921004E43184038302820181000091
-:10735000D23001230000000010D62A910092019340
-:1073600002940311D600821001EA30A21101F1311A
-:10737000C04004E41600020011D621821013D5A7E4
-:10738000032202921004E43184038302820181000B
-:1073900000D330013300000010D61B91008101653D
-:1073A000104981026510448103CF1F92019302941A
-:1073B0000311D5EE821001EA30A21101F231C04072
-:1073C00004E41600020011D60D821013D58E03229C
-:1073D00002921004E431840383028201C0109103FD
-:1073E00091029101810000D43001430012D5BDC04B
-:1073F0003028374028374428374828374C233D0168
-:107400007233ED03020063FFFC00000010D5FF9112
-:107410000092019302940311D5FD8210921011D5B0
-:10742000AF8310032202921011D5FA12D5C1921027
-:10743000C04004E41600020011D5F1821013D5A853
-:10744000032202921004E43184038302820181004A
-:1074500000D53001530000006C10026E322FD62090
-:10746000056F04043F04745B2A05440C00410400CA
-:10747000331A220A006D490D73630403660CB122AE
-:107480000F2211031314736302222C01D10FC83B86
-:10749000D10F000073630CC021D10F000000000069
-:1074A00044495630C020D10F6C10020040046B4C90
-:1074B00007032318020219D10F020319C020D10FAC
-:1074C0006C100202EA30D10F6C1002CC2503F031AF
-:1074D00060000F006F220503F1316000056F230586
-:1074E00003F231000200D10F6C1002CC2502F03003
-:1074F000D10F00006F220402F130D10F6F2304027C
-:10750000F230D10FC020D10F6C1002220A20230AC2
-:10751000006D280E28374028374428374828374C34
-:10752000233D01030200D10F6C100202E431D10FA0
-:107530000A0000004368656C73696F204657204459
-:10754000454255473D3020284275696C7420576587
-:1075500064204F63742020382031353A35303A3575
-:1075600030205044542032303038206F6E20636C0D
-:10757000656F70617472613A2F686F6D652F666513
-:107580006C69782F772F66775F372E30292C20563D
-:10759000657273696F6E2054337878203030372EDF
-:1075A00030312E3030202D203130303730313030F6
-:0875B000100701006F4EF8BB4B
-:00000001FF
diff --git a/firmware/cxgb3/t3fw-7.4.0.bin.ihex b/firmware/cxgb3/t3fw-7.4.0.bin.ihex
new file mode 100644
index 00000000000..38dda94bfa6
--- /dev/null
+++ b/firmware/cxgb3/t3fw-7.4.0.bin.ihex
@@ -0,0 +1,1917 @@
+:1000000060007400200380002003700000001000D6
+:1000100000002000E100028400070000E1000288E7
+:1000200000010000E0000000E00000A0010000006E
+:1000300044444440E3000183200200002001E0002A
+:100040002001FF101FFFD0001FFFC000E300043C91
+:100050000200000020006B741FFFC29020006BBCE8
+:100060001FFFC29420006BFC1FFFC29820006C7021
+:100070001FFFC29C200003C0C00000E43100EA3131
+:1000800000A13100A03103020002ED306E2A05000C
+:10009000ED3100020002160012FFDBC03014FFDA5F
+:1000A000D30FD30FD30F03431F244C107249F0D347
+:1000B0000FD30FD30F12FFD5230A00240A00D30F4A
+:1000C000D30FD30F03431F244C107249F0D30FD327
+:1000D0000FD30F14FFCE03421F14FFCB03421F1296
+:1000E000FFCCC0302D37302D37342D37382D373CED
+:1000F000233D017233ED00020012FFC4C0302F37E0
+:10010000002F37102F37202F3730233D017233ED6A
+:1001100000020012FFBEC0302737002737102737F4
+:1001200020273730233D017233ED03020012FFB95F
+:1001300013FFBA0C0200932012FFB913FFB90C028F
+:1001400000932012FFB8C0319320822012FFB71312
+:10015000FFB7932012FFB715FFB316FFB6C030D715
+:100160002005660160001B00000000000000000088
+:10017000043605000200D30FD30F05330C6E3B1479
+:100180000747140704437631E604360505330C6F40
+:100190003BED00020012FFA615FFA3230A00D720A3
+:1001A000070443043E0505330C0747146F3BF00377
+:1001B000020012FFA1C03014FFA1D30FD30FD30F41
+:1001C0009340B4447249F2D30FD30FD30F14FF9B63
+:1001D000834014FF9B834012FF9B230A0014FF9A65
+:1001E000D30FD30FD30F9340B4447249F2D30FD33C
+:1001F0000FD30F14FF95834012FF95C92F832084DE
+:10020000218522BC22743B0F8650B4559630B433FE
+:100210007433F463FFE60000653FE1655FDE12FFC3
+:100220007C230A0028374028374428374828374C91
+:10023000233D017233ED03020000020012FF7AC079
+:1002400032032E0503020012FF7813FF819320C0B2
+:1002500011014931004831010200C00014FF7E0441
+:10026000D23115FF7D945014FF7D04D33115FF7CEE
+:10027000945014FF7C04D43115FF7C24560014FFE5
+:100280007B04D53115FF7B24560010FF7A03000054
+:10029000000000000000000000000000000000005E
+:1002A000000000000000000000000000000000004E
+:1002B000000000000000000000000000000000003E
+:1002C000000000000000000000000000000000002E
+:1002D000000000000000000000000000000000001E
+:1002E000000000000000000000000000000000000E
+:1002F00000000000000000000000000000000000FE
+:1003000000000000000000000000000000000000ED
+:1003100000000000000000000000000000000000DD
+:1003200000000000000000000000000000000000CD
+:1003300000000000000000000000000000000000BD
+:1003400000000000000000000000000000000000AD
+:10035000000000000000000000000000000000009D
+:10036000000000000000000000000000000000008D
+:10037000000000000000000000000000000000007D
+:10038000000000000000000000000000000000006D
+:10039000000000000000000000000000000000005D
+:1003A000000000000000000000000000000000004D
+:1003B000000000000000000000000000000000003D
+:1003C000000000000000000000000000000000002D
+:1003D000000000000000000000000000000000001D
+:1003E000000000000000000000000000000000000D
+:1003F00000000000000000000000000000000000FD
+:1004000000000000000000000000000000000000EC
+:1004100000000000000000000000000000000000DC
+:1004200063FFFC000000000000000000000000006E
+:100430000000000000000000000000001FFC0000A1
+:100440001FFC0000E30005C81FFC00001FFC0000AB
+:10045000E30005C81FFC00001FFC0000E30005C806
+:100460001FFFC0001FFFC000E30005C81FFFC00042
+:100470001FFFC018E30005C81FFFC0181FFFC018EA
+:10048000E30005E01FFFC0181FFFC290E30005E076
+:100490001FFFC2901FFFC290E30008581FFFC290C9
+:1004A0001FFFC58CE3000858200000002000016AEF
+:1004B000E3000B542000018020000180E3000CC009
+:1004C0002000020020000203E3000CC02000021CF8
+:1004D00020000220E3000CC420000220200002269D
+:1004E000E3000CC82000023C20000240E3000CD0D6
+:1004F0002000024020000249E3000CD42000024CFE
+:1005000020000250E3000CE02000025020000259BD
+:10051000E3000CE42000025C20000260E3000CF029
+:100520002000026020000269E3000CF42000026C4D
+:1005300020000270E3000D0020000270200002790C
+:10054000E3000D042000028C2000028CE3000D105B
+:100550002000029020000293E3000D10200002AC66
+:10056000200002B0E3000D14200002D0200002F2AF
+:10057000E3000D18200003B0200003B0E3000D3CA1
+:10058000200003B0200003B0E3000D3C200003B0C6
+:10059000200003B0E3000D3C200003B0200003B0B6
+:1005A000E3000D3C200003B020006D94E3000D3CFF
+:1005B00020006D9420006D94E3007720000000007F
+:1005C00000000000000000001FFC00001FFC0000F5
+:1005D0001FFFC5901FFFC67020006D9820006D980A
+:1005E000DEFFFE000000080CDEADBEEF1FFFC2A064
+:1005F0001FFCFE001FFFC0941FFFC5C0300000009D
+:10060000003FFFFF8040000010000000080FFFFFC8
+:100610001FFFC26D000FFFFF804FFFFF8000000033
+:1006200000000880B000000560500000600000007D
+:1006300040000011350000004100000010000001E2
+:100640002000000000001000400000000500000035
+:1006500080000019040000000000080010000005E0
+:10066000806000007000000020000009001FF800FA
+:100670008000001EA0000000F800000007FFFFFF40
+:100680000800000018000000010080014200000086
+:100690001FFFC21D1FFFC0DC000100806040000082
+:1006A0001A0000000C0000001000000A00003000DA
+:1006B000600008008000001C000100008000001A9B
+:1006C00080000018FC0000008000000100004000D5
+:1006D000030000008000040050000003FFFFBFFF84
+:1006E0001FFFC3D400000FFFFFFFF000000016D073
+:1006F0000000FFF7A50000001FFFC4B01FFFC4618A
+:100700000001000800000B20202FFF801FFFC455B0
+:1007100000002C00FFFEFFF800FFFFFF1FFFC57861
+:1007200000002000FFFFDFFF0000FFEF01001100CD
+:100730001FFFC3D21FFFC590FFFFEFFF0000FFFBAD
+:100740001FFFC6301FFFBEA0FFFFF7FF1FFFC064E3
+:100750000000FFFD1FFFC6200001FBD01FFFC5B03A
+:100760001FFFC6601FFFC591E0FFFE001FFFC5A071
+:10077000000080001FFFC53C1FFFC5B41FFFC068FD
+:100780001FFFC4D01FFCFFD8000100817FFFFFFFC7
+:10079000E1000600000027101FFCFE301FFCFE7069
+:1007A000E10002001FFFC5381FFFC5500003D090B5
+:1007B0001FFFC5642B5063802B5079802B50908095
+:1007C0002B50A6801FFFC4690100110F202FFE00CF
+:1007D00020300080202FFF000000FFFF0001FFF805
+:1007E0002B50B2002B50B208000100102B50B180EA
+:1007F0002B50B2802B50BA00000100112B50BD28A5
+:100800002B50BC802B50BDA020300000DFFFFE002D
+:100810005000000200C0000002000000FFFFF7F4DB
+:100820001FFFC06C000FF800044000000010000023
+:100830000C4000001C400000E00000A01FFFC5406D
+:100840001FFD00081FFFC5541FFFC5681FFFC57CA3
+:10085000E1000690E10006EC00000000000000004E
+:100860000000000000000000010000000000000087
+:100870000000000000000000201000402010004098
+:100880002010004020140080200C0000200C0000EC
+:10089000200C000020100040201400802014008054
+:1008A00020140080201800C0201C0100201C010022
+:1008B000201C010020200140201800C0201800C08A
+:1008C000201800C0201C0100201800C0201800C003
+:1008D000201800C0201C01002020014020200140E1
+:1008E00020200140202009402020094020200940EC
+:1008F0002020094020240980FFFFFFFFFFFFFFFFAA
+:10090000FFFFFFFF000000000000000000000000EB
+:100910000000000000000000200054902000536000
+:1009200020005490200054902000529C2000529CA3
+:100930002000529C200050DC200050DC200050D4CD
+:100940002000504020004EE820004CC820004A9C67
+:100950000000000000000000200054602000532C24
+:10096000200053D0200053D0200051842000518417
+:10097000200051842000518420005184200050CC5C
+:100980002000518420004E0820004C7820004A4866
+:10099000000000000000000020000BE820003A30BA
+:1009A000200004C02000463C20000BE0200041480D
+:1009B000200003F0200045FC20004A2420003E5483
+:1009C00020003D70200039AC2000383C200035ACC0
+:1009D0002000310C20003BCC20002D6C2000280092
+:1009E000200067182000238C2000206C2000201895
+:1009F00020001D04200018182000154820000E2C8F
+:100A000020000C2C2000110C200012F82000434084
+:100A100020003E0820000BF0200004C00000000071
+:100A200000000000000000000000000000000000C6
+:100A300000000000000000000000000000000000B6
+:100A400000000000000000000000000000000000A6
+:100A50000000000000000000000000000000000096
+:100A60000000000000000000000000000000000086
+:100A70000000000000000000000000000000000076
+:100A80000000000000000000000000000000000066
+:100A900000000000000000000000000032640000C0
+:100AA0000000000032640000640064006400640020
+:100AB00064006400640064000000000000000000A6
+:100AC0000000000000000000000000000000000026
+:100AD0000000000000000000000000000000000016
+:100AE0000000000000000000000000000000000006
+:100AF00000000000000000000000000000000000F6
+:100B000000001000000000000000000000000000D5
+:100B100000000000000000000000100000000000C5
+:100B200000000000000000000000000000432380DF
+:100B300000000000000000000000000000000000B5
+:100B400000000000000000000000000000000000A5
+:100B500000000000005C94015D94025E94035F94C9
+:100B60000043000000000000000000000000000042
+:100B70000000000000000000000000000000000075
+:100B80000000000000000000000000000000000065
+:100B900000000000005C90015D90025E90035F9099
+:100BA00000530000000000000000000000000000F2
+:100BB0000000000000000000000000000000000035
+:100BC0000000000000000000000000000000000025
+:100BD00000000000009C94001D90019D94029E94D2
+:100BE000039F94040894050994060A94070B940043
+:100BF00043000000000000000000000000000000B2
+:100C000000000000000000000000000000000000E4
+:100C100000000000009C90019D90029E90071D9096
+:100C2000039F90047890057990067A90077B900056
+:100C30005300000000000000000000000000000061
+:100C400000000000000000000000000000000000A4
+:100C50000000000000DC94001D9001DD9402DE9491
+:100C600003DF94040494050594060694070794088A
+:100C700008940909940A0A940B0B9400430000009D
+:100C80000000000000000000000000000000000064
+:100C90000000000000DC9001DD9002DE900B1D9052
+:100CA00003DF9004B49005B59006B69007B790089E
+:100CB000B89009B9900ABA900BBB9000530000009D
+:100CC00063FFFC0020006B5010FFFF0A00000000D3
+:100CD00020006B7400D23110FFFE0A0000000000FB
+:100CE00020006BBC00D33110FFFE0A0000000000A2
+:100CF00020006BFC00D43110FFFE0A000000000051
+:100D000020006C7000D53110FFFE0A0000000000CA
+:100D100063FFFC00E00000A012FFF7822002825770
+:100D2000C82163FFFC12FFF303E83004EE3005C076
+:100D30003093209421952263FFFC00001FFFD00018
+:100D4000000400201FFFC5901FFFC670200A00117D
+:100D5000FFFB13FFFB03E63101020016FFFA17FF4A
+:100D6000FAD30F776B069060B4667763F85415B5C5
+:100D7000541A610F140063FFF90000006C1004C0E6
+:100D800020D10F006C1004C0C71AEF06D830BC2B5E
+:100D9000D72085720D4211837105450B9572023380
+:100DA0000C2376017B3B04233D089371A32D12EEA7
+:100DB000FE19EEFEA2767D632C2E0A000882022820
+:100DC0000A01038E380E0E42C8EE29A67E6D4A0532
+:100DD00000208800308C8271D10FC0F0028F387FE4
+:100DE000C0EA63FFE400C0F1C050037E0CA2EE0E27
+:100DF0003D1208820203F538050542CB5729A67E2D
+:100E00002FDC100F4F366DFA0500208800308CBCA7
+:100E100075C03008E208280A01058338030342C977
+:100E20003E29A67E0D480CD30F6D8A050020880050
+:100E3000B08C8271D10FC05008F53875C0C163FF06
+:100E4000BBC06002863876C0DA63FFD46C1012161D
+:100E5000EED8C1F9C1E8C1C72B221E28221DC0D07F
+:100E60007B81312920060BB702299CFA655008289E
+:100E70002072288CFF28247264915C2AB0000CA890
+:100E80000C6481670EA90C6492B37FA13769AC2F03
+:100E90006000340000282006D7D0288CFACC572ACE
+:100EA00020722AACFF2A24726481352AD0000CA952
+:100EB0000C6491640EAC0C64C31B7FA10768AC0783
+:100EC000C020D10F002D25028A32C0900A6E5065D5
+:100ED000E5B5292467090F4765F5B12C200C1FEEF5
+:100EE000B50CCE11AFEE29E286B4487983026005D5
+:100EF0008219EEB109C90A2992A36890078F2009C7
+:100F0000FF0C65F56E2FE28564F56865559628221D
+:100F10001D7B8105D9B060000200C0908B9417EE54
+:100F2000A70B881487740B0B47A87718EEA509BB8D
+:100F30001008770297F018EEA317EEA408A8010B8B
+:100F400088020747021BEEA097F10B880298F22750
+:100F500090232B902204781006BB1007471208BB81
+:100F6000022890210777100C88100788020B88024E
+:100F700017EE988B3307BB0187340B880298F397E1
+:100F80009997F48B9587399BF588968B3898F688D6
+:100F90009797F99BF898F717EE8F28E28507C7080F
+:100FA0002D74CF08480B28E68565550F2B221E2887
+:100FB000221D7B89022B0A0064BF042CB00728B0D5
+:100FC00000DA2006880A28824CC0D10B8000DBA002
+:100FD00065AFE763FEE90000292072659E9C60040E
+:100FE000E72A207265AEC36004DE00002EB0032C39
+:100FF0002067D4E065C1058A328C330AFF500C4566
+:1010000054BC5564F4EB19EE74882A09A9010988C7
+:101010000C64821FC0926000DD2ED0032A2067D4AA
+:10102000E065A0D88A328B330AFC500B4554BC557E
+:1010300064C4BE19EE69882A09A9017989D50BEA29
+:101040005064A4E30CEE11C0F02F16132E16168A6E
+:10105000E78CE82A16128EE9DFC0AAEA7EAB01B15E
+:10106000CF0BA8506583468837DBC0AE89991E78C0
+:101070009B022BCC012B161B29120E2B0A002916C2
+:101080001A7FC3077FC9027EAB01C0B165B49D8BD7
+:10109000352F0A002A0A007AC30564C3CB2F0A0140
+:1010A00065F4892B12162B1619005104C0C100CC0F
+:1010B0001A2CCCFF2C16170CFC132C16182B121AFA
+:1010C0002A121BDC50581974C0D0C0902E5CF42C2E
+:1010D00012172812182F121B2A121A08FF010CAA25
+:1010E000018834074C0AAB8B2812192BC6162F86A1
+:1010F000082A86092E74102924672E70038975B179
+:10110000EA2A7403B09909490C659DB32B20672D19
+:10111000250265B3FA2B221E2C221D7BC901C0B00B
+:1011200064BD9C2CB00728B000DA2006880A28820B
+:101130004CC0D10B8000DBA065AFE763FD8189BAAD
+:10114000B19965909788341CEE2598BA8F331EEEBE
+:101150001E0F4F542FB42C8D2A8A320EDD020CAC98
+:10116000017DC9660A49516F92608A3375A65B2C6E
+:10117000B0130AED510DCD010D0D410C0C417DC98F
+:10118000492EB012B0EE65E3C6C0D08E378CB88A57
+:10119000368FB97CA3077AC9027EFB01C0D1CED9B4
+:1011A00088350AAD020E8E0878EB022DAC0189B7A6
+:1011B000DAC0AF9B79BB01B1CADCB0C0B07DA30778
+:1011C0007AD9027CEB01C0B164B161C09129246776
+:1011D000C020D10F00008ADAB1AA64A0C02C206719
+:1011E0002D250265C3111DEDF88A321EEDFD0DADF2
+:1011F000010EDD0C65D28A0A4E516FE20260028157
+:10120000C090292467090F4765F2F828221D7B89C1
+:10121000022B0A0064BCA82CB00728B000DA200614
+:10122000880A28824CC0D10B8000DBA065AFE76341
+:10123000FC8D00000CE9506492ED0CEF11C0802889
+:101240001611AFBF2F16198EF88BF7DAE08FF92B36
+:101250001610ABFB7FBB01B1EA0CA8506580D688A5
+:1012600037DCE0AF89991C789B022CEC012C161B13
+:1012700029120C2C0A0029161A7AE3077AE9027F50
+:10128000BB01C0C165C2A58B352C0A002A0A007AB1
+:10129000E30564E1CA2C0A0164CE0D60028E883435
+:1012A0001BEDCF98DA8F331EEDC80F4F542FD42C7F
+:1012B0008C2A8A320ECC020BAB010CBB0C65BF0A28
+:1012C0000A49516E920263FF018A330AAB5064BE31
+:1012D000F92CD0130AEE510ECE010E0E410C0C412A
+:1012E0000ECC0C65CEE42FD012B0FF65F26EC0B00C
+:1012F0008E378CD88A362FD2097CA3077AC9027E12
+:10130000FB01C0B165BEC38835DBA0AE8E78EB01B2
+:10131000B1AB89D7DAC0AF9D79DB01B1CAC0C07B60
+:10132000A3077AB9027DEB01C0C165CE9DC09029AB
+:101330002467C020D10F88378C3698140CE90C290B
+:10134000161408F80C981D78FB07281214B088288A
+:101350001614891D9F159B16C0F02B121429161AFE
+:101360002B161B8B147AE30B7AE90688158E1678F8
+:10137000EB01C0F165F1BA29121A2F12118A352E2C
+:10138000121B9A1AAFEE2F1210C0A0AF9F79FB016B
+:10139000B1EE9F11881AC0F098107AE30A7EA90571
+:1013A0002A12017A8B01C0F164F0816001838936D1
+:1013B0008B3799170BE80C981F09C90C291615785B
+:1013C000EB07281215B088281615D9C09A199E184F
+:1013D0008A1F2E12152A161A2E161BDAC0C0E08C90
+:1013E000177F930B7FA90688188F1978FB01C0E13E
+:1013F00065E13E29121A2F12138A352E121B9A1BF1
+:10140000AFEE2F1212C0A0AF9F79FB01B1EE9F1378
+:10141000881BC0F098127AE30A7EA9052A12037A83
+:101420008B01C0F165F10A2E12162E16192A121B15
+:10143000005104C0E100EE1AB0EE2E16170EFF1395
+:101440002F16180FCC01ACAA2F121A0EBC01ACFC3F
+:101450007FCB01B1AA2A161B2C161A63FC5E000072
+:101460007FB30263FE3163FE2B7EB30263FC306305
+:10147000FC2A00006450C0DA20DBC0581648C020A7
+:10148000D10FC09163FD7A00C09163FA44DA20DB8A
+:1014900070C0D12E0A80C09A2924682C7007581574
+:1014A00038D2A0D10F03470B18ED4FDB70A8287876
+:1014B00073022B7DF8D9B063FA6100002A2C74DB2B
+:1014C00040580EB363FAE4000029221D2D25027B4B
+:1014D0009901C0B0C9B62CB00728B000DA20068840
+:1014E0000A28824CC0D10B8000DBA065AFE7C0208A
+:1014F000D10FC09163FBFF00022A025802440AA2E6
+:1015000002060000022A025802410AA20206000056
+:10151000DB70DA20C0D12E0A80C09E2924682C708E
+:1015200007581517C020D10FC09463FBC9C096633C
+:10153000FBC4C09663FBBF002A2C74DB30DC405B2D
+:10154000FE11DBA0C2A02AB4002C200C63FF2700F0
+:101550008D358CB77DCB0263FDD263FC6D8F358EEC
+:10156000D77FEB0263FDC563FC6000006C1004C014
+:1015700020D10F006C1004C020D10F006C10042B80
+:10158000221E28221DC0A0C0942924062A25027BE1
+:101590008901DBA0C9B913ED06DA2028B0002CB010
+:1015A0000703880A28824CC0D10B8000DBA065AFFE
+:1015B000E7C020D10F0000006C10042C20062A2167
+:1015C0000268C80528CCF965812E0A094C6591048A
+:1015D0008F30C1B80F8F147FB00528212365812774
+:1015E00016ECF529629E6F98026000F819ECF1295B
+:1015F00092266890078A2009AA0C65A0E72A629DB6
+:1016000064A0E12B200C0CB911A6992D92866FD9FC
+:10161000026000DB1DECE90DBD0A2DD2A368D007E6
+:101620008E200DEE0C65E0C7279285C0E06470BF88
+:101630001DECEE68434E1CECED8A2B0CAA029A704E
+:1016400089200899110D99029971882A98748F320E
+:101650009F75282104088811987718ECDE0CBF11BB
+:10166000A6FF2DF285A8B82E84CF2DDC282DF68577
+:10167000C85A2A2C74DB40580E46D2A0D10FC02085
+:10168000D10F00000029CCF96490B12C206689317B
+:10169000B1CC0C0C472C24666EC60260008509F89C
+:1016A0005065807F1CECD38A2B0F08400B881008F4
+:1016B000AA020CAA029A7089200899110D99029920
+:1016C00071883398738C329C728A2A9A74893499FF
+:1016D0007563FF7D00CC57DA20DB30DC4058151DE8
+:1016E000C020D10F00DA20C0B65815AC63FFE5006A
+:1016F000DA205815AA63FFDC00DA20DB30DC40DD9D
+:1017000050581638D2A0D10FC858DA20DB30581400
+:101710008A2A210265AFBDC09409A9022925026366
+:10172000FFB200002B21045814351DECAFC0E02E91
+:1017300024668F302B200C0F8F1463FF662921380D
+:10174000C08879830263FF5B2C20662B2104B1CC17
+:101750000C0C472C24665814291DECA3C0E02E2441
+:10176000668F302B200C0F8F1463FF376C1004C072
+:10177000B7C0A116ECA015EC92D720D840B822C073
+:10178000400535029671957002A438040442C94B95
+:101790001AEC8519EC8629A67EC140D30F6D4A0547
+:1017A00000808800208C220A88A272D10FC05008C5
+:1017B000A53875B0E363FFD76C1006931394112915
+:1017C0002006655288C0716898052A9CF965A29820
+:1017D00016EC792921028A1309094C6590CD8AA05B
+:1017E0000A6A512AACFD65A0C2CC5FDB30DA208CDE
+:1017F000115814D8C0519A13C7BF9BA98E132EE25B
+:101800000968E0602F629E1DEC6A6FF80260008438
+:101810002DD22668D0052F22007DF9782C629DC735
+:101820009064C0709C108A132B200C2AA0200CBD41
+:1018300011A6DD0A4F14BFA809880129D286AF88F6
+:10184000288C09798B591FEC5C0FBF0A2FF2A36813
+:10185000F0052822007F894729D285D490659075AC
+:1018600060004300002B200C1FEC540CBD11A6DDC2
+:1018700029D2860FBF0A6E96102FF2A368F0048853
+:10188000207F890529D285659165DA20581543C9DD
+:101890005C6001FF00DA20C0B658154060000C0003
+:1018A000C09063FFB50000DA2058153C6551E48D07
+:1018B000138C11DBD08DD0022A020D6D515813AD5F
+:1018C0009A1364A1CEC75F8FA195A9C0510F0F478E
+:1018D0009F1163FEFD00C091C0F12820062C2066F8
+:1018E000288CF9A7CC0C0C472C24666FC6098D13E5
+:1018F0008DD170DE02290A00099D02648159C9D385
+:101900008A102B21045813BD8A13C0B02B24662ED5
+:10191000A2092AA0200E28141CEC338D1315EC27E5
+:10192000C1700A773685562DDC28AC2C9C12DED08F
+:10193000A8557CD3022EDDF8D3E0DA40055B02DC4B
+:10194000305BFF8AD4A028200CB455C0D02B0A8865
+:101950002F0A800C8C11A6CC29C285AF3FAB9929E8
+:10196000C6851CEC1CDEF0AC882D84CF2812022921
+:10197000120378F3022EFDF8289020D3E007880C9C
+:10198000C170080847289420087736657FAB891313
+:1019900013EC1A8990C0F47797491BEC18C1CA2838
+:1019A00021048513099E4006EE1187530488118592
+:1019B000520E88020C88029BA09FA18F2B9DA59898
+:1019C000A497A795A603FF029FA22C200C1EEC0152
+:1019D000AECE0CCC1106CC082BC2852DE4CF2BBC8F
+:1019E000202BC6852A2C748B11580D69D2A0D10FDB
+:1019F00028203DC0E07C877F2E24670E0A4765A023
+:101A00007B1AEBFF88201EEBED8F138EE48FF4081A
+:101A100088110A88020F8F14AFEE1FEBFA98910F0E
+:101A2000EE029E901EEBF9C0801AEBEA2CD285AA3A
+:101A3000BAB8CC28A4CF2CD6852C21022F20720E28
+:101A4000CC02B1FF2F24722C2502C020D10F8713A6
+:101A5000877007074763FD6E282138C099798B028C
+:101A600063FE9ADDF063FE9500DA20DB308C11DD39
+:101A70005058155CD2A0D10FC0E163FF7A8B138C54
+:101A800011DD50C0AA2E0A802A2468DA205813BC1F
+:101A9000D2A0D10FC020D10F6C1006292102C0D0D6
+:101AA0007597102A32047FA70A8B357FBF052D2535
+:101AB000020DD902090C4C65C18216EBBE1EEBBCAF
+:101AC00028629EC0FA78F30260018829E2266890B5
+:101AD000078A2009AA0C65A17A2A629DDFA064A169
+:101AE000772B200C0CBC11A6CC29C286C08C798324
+:101AF0000260015719EBB109B90A2992A36890074E
+:101B0000882009880C65814327C2851CEBB364716A
+:101B10003A8931098B140CBB016FB11D2C20669FD3
+:101B200010B1CC0C0C472C24666EC6026001400933
+:101B3000FF5065F13A8A102AAC188934C0C47F97E7
+:101B40003C18EBB31BEBB28F359C719B708B209DC7
+:101B50007408BB029B72C08298751BEBAE0F0840E5
+:101B60009B730F881198777FF70B2F2102284A006B
+:101B700008FF022F2502C0B4600004000000C0B0BE
+:101B80007E97048F362F25227D97048837282521BC
+:101B90007C9736C0F1C0900AF9382F3C20090942E1
+:101BA00064908619EB8018EB8128967E00F08800FF
+:101BB000A08C00F08800A08C00F08800A08C2A6225
+:101BC0009D2DE4A22AAC182A669D89307797388F1C
+:101BD000338A3218EB8A07BE0B2C2104B4BB04CC29
+:101BE0001198E0C08498E1882B9DE59AE69FE71A5A
+:101BF000EB82099F4006FF110FCC020A880298E28F
+:101C0000C1FC0FCC022CE604C9B82C200C1EEB71D1
+:101C10000CCA11AECC06AA0829A2852DC4CF09B9D9
+:101C20000B29A685CF5CC020D10FC081C0900F8941
+:101C300038C08779880263FF7263FF6600CC57DA89
+:101C400020DB30DC405813C3C020D10FDA205814F9
+:101C50005363FFE8C0A063FE82DA20C0B658144F79
+:101C600063FFD900DB402A2C74580CC9D2A0D10FD5
+:101C70008A102B21045812E11EEB4EC0D02D246691
+:101C800063FEB1006C1006D62019EB491EEB4B2801
+:101C9000610217EB4808084C65805F8A300A6A5178
+:101CA00069A3572B729E6EB83F2A922668A0048CB7
+:101CB000607AC9342A729D2C4CFECAAB2B600CB6DC
+:101CC0004F0CBD11A7DD28D2860EBE0A78FB269CDC
+:101CD000112EE2A32C160068E0052F62007EF91594
+:101CE00022D285CF2560000D00DA60C0B658142BD3
+:101CF000C85A60010F00DA60581428655106DC40AC
+:101D0000DB308D30DA600D6D5158129AD3A064A08B
+:101D1000F384A1C05104044763FF6D00C0B02C6080
+:101D2000668931B1CC0C0C472C64666FC602709684
+:101D30000A2B61045812B1C0B02B64666550B42AF6
+:101D40003C10C0E7DC20C0D1C0F002DF380F0F42EA
+:101D500064F09019EB1418EB1528967E8D106DDA4F
+:101D60000500A08800C08CC0A089301DEB247797A7
+:101D70005388328C108F3302CE0BC02492E1226143
+:101D8000049DE00422118D6B9BE59FE798E61FEB15
+:101D90001A0998400688110822020FDD02C18D9DA4
+:101DA000E208220292E4B4C22E600C1FEB0A0CE897
+:101DB00011A7882C8285AFEE0C220B2BE4CF228654
+:101DC00085D2A0D10F28600CD2A08C1119EB020C87
+:101DD0008D11A988A7DD2ED2852B84CF0ECC0B2C9C
+:101DE000D685D10FC0F00ADF387FE80263FF6C634D
+:101DF000FF6000002A6C74C0B2DC20DD4058128FF6
+:101E0000C0B063FF63C020D10F0000006C10042C31
+:101E1000221D2A221EC049D320293006243468C03E
+:101E2000407AC105DDA060000200C0D06E9738C0C6
+:101E30008F2E0A802B3014C0962934060EBB022E3A
+:101E400031022B34147E8004243502DE407AC10E28
+:101E5000C8ABDBD0DA302C0A00580AE52E31020E6E
+:101E60000F4CC8FEC020D10F6895F8283102080831
+:101E70004C658FEF1AEAD01CEACE2BA29EC09A7B4B
+:101E80009B462BC22668B0048D307BD93B29A29D8E
+:101E9000C0E3CB9394901BEAE02D31049B9608DDC0
+:101EA000110EDD029D979D9112EADDC0E524C4A2CA
+:101EB0002E34062F310228A29D02FF02288C3028E2
+:101EC000A69D2F3502C020D10FDA30C0B65813B30B
+:101ED000C020D10F6C1006292006689805289CF9AF
+:101EE00065825D29210209094C659210CD51DB30D4
+:101EF000DA20044C02581317C051D3A0C7AF2A36BA
+:101F00000AC0E019EAAD1DEAB31FEAAC8A3A16EA44
+:101F1000A9B1AC64C13528629E6F88026001F129C5
+:101F2000DC332992266890078B2009BB0C65B1E051
+:101F300027629DC08E6471D82B200C0CBC11A6CCDE
+:101F400029C2867983026001D219EA9B09B90A295C
+:101F500092A3971068900828220009880C6581BB1D
+:101F600027C2856471B5292006299CF96491EC2C5F
+:101F700020668931B1CC0C0C472C24666EC60260F9
+:101F800001A109F85065819B883689F4088C14AC4E
+:101F9000991CEA8B0C99022C2104997019EAA1086A
+:101FA00008479971892A09881008990218EA9E0839
+:101FB000990299722830132930120488100699105A
+:101FC00008990228302C9A740C881008C8020988D5
+:101FD00002987389379975883898768A39C0819ABA
+:101FE000771AEA918935987B99780989140A9902B8
+:101FF000997A8A30893277A73618EA808F33987CAD
+:10200000C084987D882B2E76112976122F7613198D
+:10201000EA7A0A9F4006FF1104CA110988020FAA32
+:1020200002987EC1F90FAA022A7610C0AA600001A8
+:10203000C0A6ADBF0CBC11A6CC29C2852EF4CF0919
+:10204000A90B29C685655107C020D10F2B200C0C88
+:10205000BC1106CC0828C28609B90A6F8902600142
+:102060002E2992A36890082A220009AA0C65A11FB4
+:102070002AC28564A11928203D08284064808C84E8
+:102080003504841464408485F574537F8436048455
+:1020900014644077745374293013C08C79886CC0F1
+:1020A000902924670908476580ED882089F48435E4
+:1020B0001FEA55048414A4940F440294A014EA5017
+:1020C00008881104880298A1843698A3048414A473
+:1020D000990F990299A219EA4CADB428C2852E44F1
+:1020E000CF288C1028C6852821022F20720988024B
+:1020F000B2FF2F2472282502C020D10F00CC57DA5E
+:1021000020DB30DC40581293C020D10FC09163FF18
+:102110008FDA20C0B658132163FFE100DA2058138C
+:102120001F63FFD88A102B21045811B41DEA2A1FFF
+:10213000EA232B200CC0E02E24668A3A63FE480076
+:1021400000DA20DB30DC40DD505813A6D2A0D10FDE
+:102150002A2C74DB40580B8ED2A0D10F292138C015
+:102160008879830263FE202A12002C20662B21042A
+:102170002CCC010C0C472C24665811A01DEA161F0C
+:10218000EA0F2B200CC0E02E24668A3A63FDF8008B
+:10219000DA2058130263FF64DA205BFF1CD2A0D15F
+:1021A0000F0000006C10089515C061C1B0D9402A1D
+:1021B000203DC0400BAA010A64382A2006291606D1
+:1021C00068A8052CACF965C33B1DE9FC6440052FEC
+:1021D000120564F29C2621021EE9F806064C65628F
+:1021E000E315E9F46440D98A352930039A140A9931
+:1021F0000C6490CC2C200C8B149C110CCC11A5CC15
+:102200009C122CC286B4BB7CB3026002D38F110E29
+:10221000FE0A2EE2A368E0098620D30F0E660C6545
+:1022200062BE88122882856482B6891464905EDA60
+:1022300080D9308C201EE9F21FE9F31DE9E08B14F0
+:102240008DD4D4B07FB718B88A293C10853608C61B
+:10225000110E66029681058514A5D50F550295804D
+:102260000418146D8927889608CB110888140EBBB2
+:1022700002A8D8299C200F88029BA198A088929B35
+:10228000A3088814A8D80F880298A22AAC1019E9CC
+:10229000DEC0C08F141EE9CF86128D11286285AE74
+:1022A000DD08FF0B2CD4CF2821022F66858B352A21
+:1022B0002072098802ABAA2825022A2472C020D1E4
+:1022C0000F29529E18E9BB6F9802600208288226E7
+:1022D00068800829220008990C6591F92A529DC14D
+:1022E000CA9A1364A1EF2B200C2620060CB811A566
+:1022F000882D82860EBE0A7DC3026002022EE2A3F2
+:1023000068E0082F22000EFF0C65F1F3288285DEBD
+:10231000806481FF9810266CF96461FF2C20668828
+:1023200031B1CC0C0C472C24666EC6026001BC088F
+:10233000FD5065D1B617E9BD19E9A21AE9A92C210A
+:10234000048B2D2830102F211D0C88100BFB090C3D
+:1023500088020A880209BB026441528910C04D9B61
+:1023600090979198928D35D9E064D06CD730DBD0BE
+:10237000D8307FD713273C10BCE92632168C39960B
+:10238000E69CE78A37B4389AE80B13146430492A7C
+:10239000821686799A9696978C778A7D9C982B825E
+:1023A000172C7C209A9A2A9C189B99867BB03BB864
+:1023B000896DB9218BC996A52692162AAC18B899B1
+:1023C0009BA196A08BC786CD9BA22B921596A49B12
+:1023D000A386CB2CCC2026A605C0346BD4200D3B85
+:1023E0000C0DD8090E880A7FB705C0909988BC8863
+:1023F000C0900B1A126DAA069988998B288C18C068
+:10240000D01BE98C1CE98B16E981B1FF2A211C2322
+:10241000E6130F0F4F26E6122F251D7FA906C0F0E9
+:10242000C08028251D05F6111AE97A8F202BE615A4
+:102430002CE6162DE61726E6180AFA022AE61429D3
+:102440002006299CF96490FF29200C8D15C0801A64
+:10245000E9610C9C11AA99A5CCDA202BC28528949D
+:10246000CF0B4B0B2BC685C0B08C1658118AD2A04F
+:10247000D10F8A356FA548D8308BD56DA90C8A86C7
+:102480000A8A14CBA97AB337288C10C08028246715
+:10249000080B4765B112DA20DB302C12065811AD5B
+:1024A000D3A0C0C1C0D02DA4039C1563FD268636E1
+:1024B00064610C8910C04D9B909791989263FEA423
+:1024C000C08163FFC78A15CCA7DA20DB308C165891
+:1024D00011A1C020D10FDA20C0B658123063FFE43A
+:1024E00000DA208B1158122D63FFD9009E178A1332
+:1024F0002B21045810C28E17C0B02B246663FE3403
+:10250000C08063FE09DA20DB308C16DD505812B52E
+:10251000D2A0D10FDA2058122163FFA82D2138C094
+:10252000C87DC30263FE0D8A132B21042C206698FC
+:1025300017B1CC0C0C472C24665810B08E17C0D0A5
+:102540002D246663FDEE0000262138B06606064F96
+:10255000262538656EF128206A7F870508294164A1
+:1025600090A5C0D01BE92619E93426200723E61BD5
+:10257000B16609FA022BE61A28200A2DE61D2AE682
+:102580001E09880228E61C882606064728E6202B16
+:10259000220826E53E2BE6212D24072C20062A20A2
+:1025A0006468C347B44463FE9EDB30DA208D15C0F7
+:1025B000CE2E0A802C24688C165810F1D2A0D10F90
+:1025C0008E102A321616E8FD0A2A1486662BE612A9
+:1025D00097E127E61328E614AA6609660296E02E1C
+:1025E000EC4869ED50C14663FD7A000064AFB41950
+:1025F000E8F328201689920A880C00910400881AB2
+:10260000A8B8982963FF9C002B21046EB81E2C20CB
+:1026100066B8CC0C0C472C2466C9C09E178A135888
+:1026200010778E17C0348F20C0D02D2466C0682646
+:10263000240663FF2C008D35C08064D04AD9E0DCCD
+:1026400030DBE0DF301AE8FDB188B4FF17E8FD8623
+:10265000C9249DFF8DC82CCC102D46300767012D55
+:1026600046320A66011DE8F7264631AD6D2D463328
+:1026700026F21597B796B684C3BCBB94B58D3529A1
+:102680009C107D83C22F211DC14663FD4B000000BD
+:102690006C1006292006289CF86582BF2921022B90
+:1026A000200C09094C6590E116E8C30CBA11A6AAE2
+:1026B0002DA2862C0A127DC30260028C19E8BF0984
+:1026C000B90A2992A36890078C2009CC0C65C278BE
+:1026D00029A2856492722D629E1AE8B56FD80260B5
+:1026E000026E2AA22629160168A0082B22000ABB26
+:1026F0000C65B25C29629DC18C6492542A21200A27
+:10270000806099102C203CC7EF000F3E010B3EB1BA
+:10271000BD0FDB390BBB098F260DBD112DDC1C0D48
+:102720000D410EDD038E27B1DD0D0D410FEE0C0DB9
+:10273000BB0B2BBC1C0BB7027EC71C2C21257BCBF3
+:10274000162D1AFC0CBA0C0DA16000093E01073EC3
+:10275000B1780987390B770A77EB0260020A2C21DE
+:1027600023282121B1CC0C0C4F2C25237C8B29B0A4
+:10277000CD2D2523C855DA20DB3058106F292102D2
+:10278000CC96C0E80E9E022E2502CC57DA20DB3014
+:10279000DC405810F0C020D10F2C20668931B1CC1C
+:1027A0000C0C472C24666EC6026001D309FD5065EF
+:1027B000D1CD2F0A012E301129221464E0112822D4
+:1027C0001B090C4400C10400FA1A0A880228261BBF
+:1027D0002E3010C0A0C0B0941295131CE878883039
+:1027E0002CC022088D14778704C0F10CFA38C04140
+:1027F000C0F225203CC0840858010F5F010F4B3800
+:1028000005354007BB10C0F0084F3808FF100FBB5C
+:102810000228ECFEC0F0084F38842B0BA8100AFFEA
+:10282000102A21200F88020B880208440218E8862B
+:102830008F110844022821250A2A14082814048824
+:10284000110A88022A210494F08B2004E41008BBAA
+:102850001104BB02C04A04BB029BF1842A08AB11DD
+:102860000BEB0294F40A54110B44020555100D1B96
+:102870004094F707BB100B5502085502C08195F62E
+:102880008433C05094F3B1948B3295F898F99BF24D
+:10289000C080C1BC24261499FA9BF598FB85389515
+:1028A000FC843A94FD8B3B9BFE883998FF85352547
+:1028B000F6108436851324F6118B3784122BF6120A
+:1028C000C0B064C07E89307797438D3288332E3014
+:1028D000108F111CE84A0999400699112CF614C072
+:1028E000C42CF6158C2B2DF61A28F61B2BF6190482
+:1028F000A81109880208EE0219E840C18008EE021A
+:1029000009C90229F6162EF618C09E600001C09A69
+:102910002F200C18E8300CFE11A8FFA6EE2DE28542
+:102920002BF4CF0D9D0B2DE685C87F8A268929A71C
+:10293000AA9A260A990C090948292525655050C0EC
+:1029400020D10F00C09A63FFC6DA2058111463FE2D
+:1029500038DA20C0B658111163FE2E0068973C2B60
+:102960009CFD64BE24C020D10FDA20DB705810CD4E
+:10297000C0C0C0D10ADA390ADC3865CDE063FE098F
+:102980008A102B2104580F9DC0B02B246663FE21B2
+:10299000DB402A2C7458097ED2A0D10FDA20580FC0
+:1029A000A263FCF76C1004C020D10F006C10042946
+:1029B0000A801EE8261FE8261CE7FF0C2B11ACBB83
+:1029C0002C2CFC2DB2850FCC029ED19CD0C051C0C6
+:1029D0007013E82214E82118E81F2AB285A82804F9
+:1029E000240A234691A986B8AA2AB685A9882784ED
+:1029F0009F25649FD10F00006C100AD6302830103C
+:102A0000292006288CF964829B68980B2A9CF9651A
+:102A1000A1B2022A02580F8489371BE7E8C89164E3
+:102A2000520E2A21020A0C4C65C2588D3019E7E17A
+:102A300074D7052E212365E29E2F929E1AE7DD6F43
+:102A4000F8026002532AA22668A0082C22000ACCB1
+:102A50000C65C2442A929D64A23E9A151FE7D78D49
+:102A600067C1E6C8DD2B620618E7D564B00528808B
+:102A7000217B8B432B200C18E7CF0CBC11A8CC2951
+:102A8000C28679EB460FBE0A2EE2A368E0052F222C
+:102A9000007EF9372CC2859C1864C2332B212F8706
+:102AA000660B7B360B790C6F9D266ED2462C203D33
+:102AB0007BC740CE5560001E2A200CC1B28C205826
+:102AC00010F79A1864A2458D6763FFCFC0C063FFFB
+:102AD000C5D7B063FFD300C0E06000022E60030ED4
+:102AE000DB0C6EB20EDC700CEA11AA6A2AAC20581C
+:102AF0000199D7A0DA20DB70C1C82D212058109190
+:102B00008C268B279A160CBB0C7AB3348F188963EA
+:102B100099F3886298F28E659EF82D60108A189D50
+:102B20001768D729C0D09DA92C22182B22139CAB43
+:102B30009BAA97A58E667E7302600097CF586000AF
+:102B40001FDA208B1658105765A13863FFBDC0816E
+:102B5000C0908F18C0A29AF999FB98FA97F563FF75
+:102B6000D2DB30DA20DC40580FFBC051D6A0C0C009
+:102B70002BA0102CA4039B172C1208022A02066B10
+:102B800002DF702D60038E179D149E100CDD11C0A6
+:102B9000E0AD6D2DDC205801188C148B16ACAC2CDC
+:102BA00064038A268929ABAA0A990C9A26886609A1
+:102BB000094829252507880C98662F2218A7FF2F7A
+:102BC000261863FE96DA20DB30DC40DD5058110514
+:102BD000D2A0D10FC0302C20668961B1CC0C0C473B
+:102BE0002C24666EC6026000D2C03009FD5065D04C
+:102BF000CA8E6764E069647066DB608C18DF70DA27
+:102C0000202D60038E170CDD119E10AD6D2DDC2084
+:102C10001EE78D5800F9232618DA208B16DC402F8A
+:102C20002213DD50B1FF2F2613580F9AD2A0D10FD7
+:102C30000028203D084840658DE76F953EDA308DCD
+:102C4000B56D990C8CA80C8C14CACF7CD32D2AACF2
+:102C500010C090292467090D4764DDC5600092000B
+:102C60002C1208066B022D6C20077F028E17DA20CB
+:102C70009E101EE77458007D63FF9A00C09163FFA9
+:102C8000D1000000655081DA20DB60DC40580FB1D4
+:102C9000C020C0F02FA403D10FDA20C0B658103FD7
+:102CA00063FFE000006F950263FD6CDA20DB30DC2F
+:102CB00040DD50C4E0580F32D2A0D10F8A152B212D
+:102CC00004580ECE232466286010981763FF210055
+:102CD000DA2058103263FFABC858DB30DA20580FC7
+:102CE000162A210265AF9CC09409A9022925026316
+:102CF000FF91DB30DC40DD50C0A32E0A802A24681F
+:102D0000DA20580F1FD2A0D10FC020D10FDA202B0C
+:102D1000200C58104763FF6B6C1004282006C0621B
+:102D2000288CF8658125C050C7DF2B221BC0E12A03
+:102D3000206B29212300A104B099292523B1AA00E1
+:102D4000EC1A0BC4010A0A442A246B04E4390DCCA2
+:102D5000030CBB012B261B64406929200C1BE715C3
+:102D60000C9A110BAA082FA2861BE7136FF90260B9
+:102D700000B60B9B0A2BB2A368B0082C22000BCC28
+:102D80000C65C0A42BA2851DE73664B09B8C2B2458
+:102D900021040DCC029CB08820C0C50888110C8885
+:102DA0000298B1882A08441198B48F3494B79FB51B
+:102DB000C0401EE7082DA2850E9E0825E4CF2DDC1D
+:102DC000282DA68529210209094C68941A689820A3
+:102DD000C9402A210265A00B2A221E2B221D7AB18E
+:102DE0000265A079C020D10F2C212365CFDE6000C1
+:102DF000082E21212D21237EDBD52B221E2F221DE3
+:102E00002525027BF901C0B064BFC413E6E92CB0EC
+:102E10000728B000DA2003880A28824CC0D10B8032
+:102E200000DBA065AFE763FFA62A2C74C0B02C0AB4
+:102E300002580E081CE70C9CA08B2008BB1106BB97
+:102E4000029BA1893499A263FF790000262468DAE5
+:102E500020DB30DC40DD50581063D2A0D10FDA20E7
+:102E60002B200C580FCEC020D10F00006C1006078D
+:102E70003D14C080DC30DB40DA20C047C02123BCD9
+:102E800030032838080842774001B1DD64815A1EBA
+:102E9000E6C519E6C629E67ED30F6DDA050050882F
+:102EA00000308CC0E0C02025A03C14E6C4B6D38F0F
+:102EB000C0C0D00F87142440220F8940941077F7A8
+:102EC00004C081048238C0F10B2810C044C0220421
+:102ED000540104FD3802520102FE3808DD10821C44
+:102EE00007EE100E6E020EDD02242CFEC0E004FE82
+:102EF000380AEE100E88020D88028DAB1EE6B4086B
+:102F0000D8020E880298B0C0E80428100E5E018432
+:102F1000A025A125084411084402052514045511D3
+:102F2000043402C0810E8E3994B18FAA84109FB4EC
+:102F300075660C26A11FC0F2062614600009000069
+:102F400026A120C0F20626140565020F7701078727
+:102F50003905E61007781008660206550295B62571
+:102F6000A1040AE61108581108280208660296B75B
+:102F7000C060644056649053067E11C0F489C288D4
+:102F8000C30B340B96459847994618E69B9F41041E
+:102F900059110E99021FE699020E4708D80298426D
+:102FA0000E99029F40C1E00E990299442FA00CB4E3
+:102FB000380CF91114E6881EE67FA4FFAE992E9214
+:102FC0008526F4CF0E880B289685D10F2BA00C1FD9
+:102FD000E6791CE6800CBE11ACBBAFEE2DE2852677
+:102FE000B4CF0D3D0B2DE685D10FC0800528387874
+:102FF000480263FEA263FE966C1006C0C06570F1C5
+:103000008830C030088714778712C0B0C0A619E690
+:103010006B299022C030CC97C031600003C0B0C093
+:10302000A6C0E0C091C0D4C08225203C0B3F1097C1
+:1030300012831CC0700858010D5D01089738C080CC
+:103040000B9838077710048810086802087702C0C8
+:10305000800D98382D3CFE0888100D9E388D2B0A67
+:10306000EE1008EE0207EE020CB8100FDD02053B71
+:10307000400EDD029D408920043D100899110D99F4
+:10308000022D210409A90208DD119941872A05B9F9
+:10309000100D3D020ABB110DBB02087702974428B0
+:1030A00021258712082814048811071E4007EE10F6
+:1030B0000E990275660926211F0626146000060077
+:1030C0002621200626140868029B47098802984694
+:1030D00029200CD2C0C0800C9E111BE63E1FE63595
+:1030E000AB99AFEE2DE2852894CF0DAD0B2DE68583
+:1030F000D10FDD40C0A6C0B08E51CAE0B2AAB1BBAC
+:103100002DDC108F500E7836981008770C9FD898C9
+:10311000D989538F52991199DB9FDA7E8309B1CCFB
+:10312000255C10C97763FFCF88108D1108E70C97D5
+:1031300051AD8DD7F078DB01B1F79D5397528830B0
+:10314000C030088714088840648ED565BEC963FE08
+:10315000BC0000006C1004D720B03A8820C0308238
+:1031600021CAA0742B1E2972046D080FC980C99151
+:103170008575B133A2527A3B0B742B0863FFE900CB
+:10318000649FECD10FD240D10F0000006C100AD622
+:10319000302E3027D950DA4015E6092430269A150A
+:1031A00029160464E0026493732920062A9CF865BA
+:1031B000A3CE2A2102270A040A0B4C65B3978C3050
+:1031C00074C7052D212365D4A0C0A62B0A032C2289
+:1031D00000580F0B64A3B917E5F78E389A1664E30D
+:1031E000BA2F6027285021C9F37E8311C2B08C20EA
+:1031F0002A200C580F2AD7A0CDA16004A200C2B08B
+:103200008C202A200C580EFED7A064A4862F212ED5
+:103210008B680FBF360FB90C6F9D54296027D5B04E
+:103220006E920528203D7B8F4CDA20DB50C1C42DE7
+:10323000211F580EC48B269A189A1989272AAC3850
+:103240000B990C7A93538963C08099738F62987835
+:103250009F728E659E798D679D7B8C6695759C7A35
+:103260008E687E53026000B18B1465B050600038E8
+:10327000DBF063FFA5008A14C9A92E60030E9B0C26
+:103280006EB2A5DC500CEA11AA6A2AAC285BFFB129
+:10329000D5A063FF93C0E063FFE2DA208B18580EDD
+:1032A0008165A2B163FF9E0000DA20DB308C1558E7
+:1032B0000E29D6A0C0C0C0D12D16042CA403DC70EA
+:1032C000DA20DB60DF502D6003C0E09E109D171EEA
+:1032D000E5D20CDD110D6D082DDC285BFF478E66F5
+:1032E0008F678817AF5FA8A828640375FB01B1EE4C
+:1032F0008A189E669F6789268829AA9909880C9949
+:10330000268E6808084805EE0C28252515E5AC9E94
+:103310006865EECC63FEE6000000C9432F21232B35
+:1033200021212FFC010F0F4F2F25237FBB026003AC
+:10333000142C20668961B1CC0C0C472C24666EC617
+:103340000260022809FD5065D22264E1B62E602792
+:1033500064E1B0DC70DF50DA20DB601EE5C32D6075
+:1033600003C08098100CDD11AD6D2DDC285BFF22B1
+:10337000644181C0442B0A008C202A200C580EA0E6
+:103380000AA70265A00FC0B02C22002A200C580EFC
+:103390009CD7A064AFEFDA20C1BCC1C82D21208F1B
+:1033A000188E268929AFEE9E260E990C0909482908
+:1033B0002525580E64C090C050C0C288609A191E5E
+:1033C000E57FC0A12EE022088F14778704C0810E0C
+:1033D0008938C0800B93102D203C2921200CDC0162
+:1033E00004DB010929140BA8380CA5380D3D401C3D
+:1033F000E5968B2B088810075510085502053302F7
+:103400002821250F154003BB020CBB0207551005F0
+:10341000D3100828140ADD11048811098802053325
+:10342000022921040833029B70C0808A201BE58F8B
+:1034300008AA110BAA029A71C0A1852A93769574E5
+:1034400008931103DD020ADD029D778C63C1DC9CC9
+:10345000738B6298789A799B72232214C0C0B1351D
+:103460002526149C7B9D75937A2B621A9B7C2A627D
+:103470001C9A7D28621D987E25621B957F2362170A
+:103480002376102D62182D76112C62192C76126479
+:10349000E0B98E6077E73DC0FE13E5571DE558C1E2
+:1034A000818A628B630495110E9C4006CC110C55E9
+:1034B00002247615085502C0802D76148D2B2B76AC
+:1034C0001B2A761A28761925761803DD022D761622
+:1034D0006000030000C0FA2E200C19E53E18E53507
+:1034E000A9E90CEE11A8EEC0802DE2852894CF0D3D
+:1034F000FD0B2DE685DA208B198C158D14580D6582
+:10350000D2A0D10FDC70DF50DB602D6C28C0A01E74
+:10351000E5569A10DA205BFE5563FE53002B203DE2
+:103520000B4B4065BC826FE527DA308F556DE90C97
+:103530008EAA0E8E14C9E87EF3162AAC10C090290C
+:103540002467090F4764FC6060015F00C0FA63FFF5
+:1035500085C09163FFE88814658168DA20DB608CA0
+:1035600015580D7CC020C09029A403D10F8A162BBA
+:103570002104580CA2C0A02A24668E6863FDCA00EC
+:10358000002B9CF965B0FDDA20580CA763FC2200E3
+:1035900000DA20C0B6580E0163FFBA002B200C0CD5
+:1035A000BE11A7EE2DE286C1C27DC30260011819CB
+:1035B000E50209B90A2992A36890082A220009AAFB
+:1035C0000C65A10326E2856460FD2C20668931B17B
+:1035D000CC0C0C472C24666FC60270960C8A162BF6
+:1035E0002104580C86C0D02D24668E3077E74D1C00
+:1035F000E5021BE5028F328833C0A42D21040E9909
+:103600004006991104DD1109DD029A61C19009DDBE
+:10361000029B60C0908B2B9D649F66986799650C98
+:10362000BB029B6228200C1AE4EBAA8A0C8811A723
+:10363000882F828529A4CF2FFC202F86858A1465A8
+:10364000A0A6C020D10FB0FC8B142C2523C8B70234
+:103650002A02066B02580CB82A210265AEF7C0D8C0
+:103660000DAD022D250263FEEC008E14C8E8DA20B1
+:10367000DB30580CB12A210265AEDA07AF022F25E4
+:103680000263FED100DA20DB308C158D14580E5504
+:10369000D2A0D10FDA202B200C580DC063FEB6004B
+:1036A000DA202B200C580DE263FEAADA20DB308CE6
+:1036B000152D12042E0A80280A00282468580CB000
+:1036C00063FAE500C020D10FDA20580DB48914CD7B
+:1036D00092DA20DB308C15580D1FDBA0C020C0A073
+:1036E0002AB403D10FC020D10F2A2C748B15580691
+:1036F00028D2A0D10F0000006C100C2821029410D9
+:1037000008084C6583621FE4AB29F29E6F98026043
+:1037100003661DE4A729D2266890082A220009AA78
+:103720000C65A3542CF29D64C34E2B200C0CB611D7
+:10373000AF66286286C1EC78E30260034619E49E16
+:1037400009B90A2992A36890078A2009AA0C65A3DF
+:103750003224628564432CC0E12A3109C0702724D9
+:103760006689359A11992A88369912982B89379843
+:1037700013992C883899140858149815982D89395C
+:103780002A25042E251D29251C283028C0922824EE
+:103790003C2A302908084798160989012A243D2A1D
+:1037A000311599170A094109A90C299CEC29251FF3
+:1037B0007E87192D2A000DA06000083E010A3EB147
+:1037C000AD08DA390EAA110A990C29251F2A211FE2
+:1037D00018E4A80A8160C1D0941A951B01083E0024
+:1037E000053EB184054839843C259CFC0D8836296A
+:1037F000201408AA1C8D3D2726182E26132E2614C9
+:103800002E261527261B2E246B27246727246808BD
+:10381000581C0909432924142932112A252E282548
+:103820002F27252427252527252C27252325252037
+:103830002425212D2522841A2D211C851B6FD202BF
+:10384000600209C0A099186D080AB1AA00A104007D
+:10385000E91A7D9B0263FFEE8918C080C0E1C07049
+:10386000C0D29B1D951B961C9C1E16E4722C203DFD
+:1038700015E4820C0B400DCC010BE7381DE4640A03
+:1038800077100CE8380B8810C0C49C410877029D63
+:1038900040B0A80988118B209C499D48954B9643C0
+:1038A000087702861418E47315E45A08770205BBFA
+:1038B000029B4A9B4297468812871108DA149A4E57
+:1038C0000D88100D77110877021AE44E06D8140DF2
+:1038D0006610087702974FC78F984D984C98458788
+:1038E0001598440715140D55110A5502954715E40E
+:1038F000638A262D46102D46182D46202C46112C65
+:1039000046192C46212B46122B461A2846142846C7
+:10391000152B462288162546242546268B170A0C89
+:1039200048090D4885130EDD1105CC110839400BEF
+:10393000EB390299101EE4520DCC020D5511082DE1
+:10394000400655022E461316E41D0FDD11254616BE
+:10395000080840851B0188100DBB0286671DE449DD
+:103960000988020CBB0219E4191CE4472B46172DE9
+:10397000461BA7661BE446C0702C461C0988028CB7
+:103980001E28461E2B4623C0908B1D29461D294606
+:103990001F18E43F2946272846252931162E2006E0
+:1039A00029246A243117962D242538861CCCE1273A
+:1039B0002407C0D7090E4064E0829A29092841648F
+:1039C000809164409B2D2406C098094936280AA09E
+:1039D00024628501C404A84428210424668508883B
+:1039E000118E3F8A3E2D32100EA41800C4040EAE74
+:1039F0001800EE110ACA530EDD02C0E30E880298C9
+:103A0000C11EE42409084E9EC08E2094C398C59D13
+:103A1000C418E3F01DE42105EE110EAA020DAA025E
+:103A2000A8B82784CF9AC21EE3E224F29D27E4A21D
+:103A3000244C1824F69D655052C020D10F2D240629
+:103A4000C0A0C09809493604A93863FF7FC0A063AD
+:103A5000FE070000654F6DC098C0A82A240663FFCA
+:103A60006B2D2406C09063FF63CC57DA20DB308CCB
+:103A700010580C38C020D10F00DA20C0B6580CC73F
+:103A800063FFE500DA20580CC563FFDC2A2C748B39
+:103A90001058053FD2A0D10F6C10062820068A339B
+:103AA0006F8202600161C05013E3C229210216E354
+:103AB000C1699204252502D9502C20159A2814E3B7
+:103AC000BF8F2627200B0AFE0C0477092B711C647C
+:103AD000E1398E428D436FBC0260016F00E104B09A
+:103AE000C800881A08A80808D80298272B2006685A
+:103AF000B32ECE972B221E2C221D0111027BC90151
+:103B0000C0B064B0172CB00728B000DA2003880AD0
+:103B100028824CC0D10B8000DBA065AFE7C020D16C
+:103B20000F2D206464DFCA8B29C0F10BAB0C66BF7C
+:103B3000C02B200C0CBC11A6CC28C2862E0A0878FB
+:103B4000EB611EE39D0EBE0A2EE2A368E00528226B
+:103B5000007E894F29C2851EE3A96490461FE3B603
+:103B60009E90C084989128200A95930F880298927D
+:103B70008E200FEE029E942F200788262F950A98FC
+:103B8000969A972E200625240768E3432921022AC6
+:103B9000C2851DE3902AAC20ADBD25D4CF2AC685B1
+:103BA00063FF4E002E2065CBEDC082282465C9F648
+:103BB00005E4310002002A62821BE3982941020BCE
+:103BC000AA022A668209E43129210263FF23000048
+:103BD00064DFB88F422E201600F1040DEE0C00EECB
+:103BE0001AAEAE9E2963FFA38A202B3221B1AA9A76
+:103BF000B0293221283223B4992936217989A92B79
+:103C000032222B362163FFA0C020D10F9F2725240D
+:103C100015ACB828751C2B2006C0C12EBCFE64E074
+:103C2000AB68B7772DBCFD65DEC72D2064C0F0649E
+:103C3000D0868E290EAE0C66E089C0F128205A2865
+:103C40008CFE08CF3865FEE863FF580000E004935F
+:103C500010C0810AF30C038339C78F08D80308A862
+:103C60000108F80C080819A83303C80CA8B828756F
+:103C70001C030B472B24158310CBB700E104B0BC09
+:103C800000CC1AACAC0CDC029C27659E5EC0B20B6B
+:103C9000990209094F29250263FE50002D206A0D63
+:103CA0002D4165DF7EDA20C0B0580C8F64AF18C09C
+:103CB000F163FEEF9F2763FFD02E221F65EE326374
+:103CC000FF79000028221F658E2763FF6E252406DA
+:103CD00029210263FE1B00006C10066571332B4C1A
+:103CE00018C0C7293C18C0A1C08009A838080842DC
+:103CF0006481101CE32C1AE32D2AC67E2A5CFDD3B6
+:103D00000F6DAA0500B08800908C8940C0A009887A
+:103D1000471FE355080B47094C50090D5304DD10AC
+:103D2000B4CC04CC100D5D029D310CBB029B3088DD
+:103D3000438E2098350FEE029E328D26D850A6DD98
+:103D40009D268E40C0900E5E5064E0971CE33B1EA3
+:103D5000E32B038B0BC0F49FB19EB02D200A99B3C7
+:103D60000CDD029DB28F200CFF029FB48E262D2009
+:103D7000079EB68C282DB50A9CB72924072F20064C
+:103D80002B206469F339CBB61DE30D2320168DD2A9
+:103D90000B330C00D10400331AB48DA3C393292232
+:103DA000200C13E30C1FE3030C2E11AFEEA322290A
+:103DB00024CF2FE285D2A00FDD0B2DE685D10F0099
+:103DC0002E200CB48C0CEB111FE3031DE2FAAFEEB6
+:103DD000ADBB22B28529E4CF02C20B22B685D2A0A8
+:103DE000D10F00002E200C1CE2F31FE2FA0CEB11A5
+:103DF000AFEEACBB22B28529E4CF02820B22B6859E
+:103E0000D2A0D10FC0D00BAD387DC80263FEEC63E9
+:103E1000FEE08E40272C747BEE12DA70C0B32C3C8F
+:103E200018DD50580A868940C08063FEE3066E02A2
+:103E3000022A02DB30DC40DD505800049A10DB50CF
+:103E4000DA70580453881063FEF700006C10069275
+:103E5000121EE2E48C40AE2D0C8C472E3C1804CA96
+:103E60000BD9A07DA30229ADF875C302600084C000
+:103E7000B0C023C0A09D106D0844B89F0EB80A8D35
+:103E8000900EB70BB8770D6D36ADAA9D800D660C00
+:103E9000D8F000808800708C879068B124B22277B7
+:103EA000D3278891C0D0CB879890279C100070882A
+:103EB00000F08C9D91CB6FC08108BB0375CB36633E
+:103EC000FFB4B1222EEC1863FFD485920D770C86D7
+:103ED000939790A6D67D6B01B1559693959260000D
+:103EE00016B3CC2D9C188810D9D078D3C729DDF80B
+:103EF00063FFC100C0238A421BE2E900CD322D449A
+:103F0000029B3092318942854379A1051EE2E50E7C
+:103F1000550187121BE2D5897095350B99029932AC
+:103F200088420A880C98428676A6A696768F44AF79
+:103F3000AF9F44D10F0000006C10089311D6308859
+:103F400030C0910863510808470598389812282115
+:103F500002293CFD08084C6581656591628A630A07
+:103F60002B5065B18B0A6F142E0AFF7CA60A2C20F9
+:103F70005ACCC42D0A022D245A7FE0026002158912
+:103F80002888261FE2C809880C65820F2E200B0F97
+:103F9000EE0B2DE0FE2EE0FF08DD110EDD021EE22D
+:103FA000C2AEDD1EE2C21CE2C20EDD010DCC37C185
+:103FB00080084837B88DB488981089601AE2807BF1
+:103FC00096218B622AA0219C147BA3179D132A2083
+:103FD0000C8B108C20580BB18C148D13DBA0CEAC45
+:103FE0006001C4002E200C1BE2730CEA110BAA081E
+:103FF0002BA2861FE2717BDB3B0FEF0A2FF2A36837
+:10400000F0052822007F892C2BA28564B0AA876244
+:104010008826DE700C7936097A0C6FAD1C8F279BD1
+:104020001508FF0C77F3197E7B729D139C149B156A
+:10403000CF56600025C0B063FFD0D79063FFDD008E
+:10404000009D139C14DA20DB70580B168B158C1412
+:104050008D1365A06A8E6263FFCC00DA208B11DCC1
+:1040600040580ABCD6A08B15C051DE70DA20DC6047
+:10407000DD405BFF768D138C14D9A02E200C1BE243
+:104080004D1FE2540CEA11AFEFC0E0ABAA2BA285A2
+:104090002EF4CF0B990B29A68563FF1D00DA20DCD7
+:1040A00060DD40DE708912282007DF50A9882824AF
+:1040B000075BFF09D2A0D10F00DBE0DA20580B37F5
+:1040C0006550EF2A20140A3A4065A0EBDB60DC4023
+:1040D000DD30022A025809A7D6A064A0D584A183A6
+:1040E000A00404470305479512036351C05163FEC2
+:1040F0005C2C2006D30F28CCFD6480A568C704C0C3
+:10410000932924062C2006C0B18D641FE22C9D2724
+:104110009D289D298FF29D2600F10400BB1A00F016
+:1041200004B0BE0EDD01C0F0ADBB8D652F24070DC0
+:104130000E5E01EE11AEBB2E0AFEB0BB0B0B190ECC
+:10414000BB36C0E20B0B470EBB372B241618E224FC
+:104150000A09450D0B422B240B29240AB4BE2E2438
+:104160000C7D88572920162FCCFDB09D0A5C520D7E
+:10417000CC362C246465FDEC0C0C4764CDE618E2CB
+:104180000F8E2888820C9F0C00810400FF1AAFEE6E
+:104190009E2963FDCF1CE23E63FE13001CE23563E3
+:1041A000FE0C8D6563FFA500DA202B200C580B2038
+:1041B000645F0FC020D10F00C020D10FC09329240D
+:1041C00016C09363FFA000006C1004C06017E1F8F4
+:1041D0001DE1FBC3812931012A300829240A78A175
+:1041E00008C3B27BA172D260D10FC0C16550512605
+:1041F00025022AD0202F200B290AFB2B20142E2049
+:104200001526241509BB010DFF0928F11C2B2414C8
+:10421000A8EE2EF51C64A0A92B221E28221D011138
+:10422000027B8901DB6064B0172CB00728B000DA8C
+:104230002007880A28824CC0D10B8000DBA065AF24
+:10424000E7DB30DC40DD50DA205800DE29210209AE
+:104250000B4CCAB2D2A0D10F00CC5A2C30087BC173
+:10426000372ED02064E02D022A02033B02DC40DD21
+:10427000505800D4D2A0D10F2B2014B0BB2B241443
+:104280000B0F4164F0797CB7CAC0C10C9C022C258D
+:1042900002D2A0D10FC020D10F2E200669E2C12684
+:1042A00024062B221E2F221D29200B2820150D99B4
+:1042B000092A911C262415AA8828951C7BF149609F
+:1042C0000048B0BB2B24140B0A4164A0627CB702E7
+:1042D0002C25022B221E2C221DD30F7BC901C0B01E
+:1042E000C9B62CB00728B000DA2007880A28824C0B
+:1042F000C0D10B8000DBA065AFE7C020D10F00006C
+:10430000262406D2A0D10F0000DB601DE1AC64BF03
+:104310004F2CB00728B000DA2007880A28824CC04A
+:10432000D10B8000DBA065AFE71DE1A463FF310086
+:1043300026240663FF9C00006C1004282006260A31
+:10434000046F856364502A2920147D9724022A0271
+:10435000DB30DC40DD50580019292102090A4CC825
+:10436000A2C020D10FC0B10B9B022B2502C020D1CF
+:104370000F00022A02033B022C0A015800D1C9AAED
+:10438000DA20DB30DC405809F329A011D3A07E9756
+:10439000082C0AFD0C9C012CA411C0512D201406E0
+:1043A000DD022D241463FFA4DA20DB30DC40DD5075
+:1043B000C0E0580973D2A0D10F0000006C1006169F
+:1043C000E17D1CE17D655157C0E117E179282102AB
+:1043D0002D220008084C6580932B32000B6951296F
+:1043E0009CFD6590872A629E6EA84C2A722668A062
+:1043F000027AD9432A629DCBAD7CBE502B200C0C97
+:10440000BD11A6DD28D2862F4C0478FB160CBF0AFE
+:104410002FF2A368F0052822007F89072DD285D3CB
+:104420000F65D0742A210419E1A3D30F7A9B2EDAE9
+:104430002058086E600035002D21041BE19E7DBBD5
+:1044400024DA20C0B6580869CA546001030B2B5007
+:104450002B240BB4BB0B0B472B240C63FFA0DA20DF
+:10446000580A4E600006DA20C0B6580A4C6550E083
+:10447000DC40DB302D3200022A020D6D515808BDA0
+:104480001CE14ED3A064A0C8C05184A18EA0040436
+:10449000470E0E4763FF3500002B2104C08C893185
+:1044A000C070DF7009F950098F386EB8172C20667C
+:1044B000AECC0C0C472C24667CFB099D105808CF11
+:1044C0008D1027246694D11EE151B8DC9ED0655032
+:1044D00056C0D7B83AC0B1C0F00CBF380F0F42CBAE
+:1044E000F119E13018E13228967EB04BD30F6DBA46
+:1044F0000500A08800C08C2C200CC0201DE1360CCB
+:10450000CF11A6FF2EF285ADCC27C4CF0E4E0B2EB9
+:10451000F685D10FC0800AB83878D0CD63FFC100CE
+:104520008E300E0E4763FEA12A2C742B0A01044D17
+:10453000025808C22F200C12E1270CF911A699A2EB
+:10454000FF27F4CF289285D2A008480B289685D162
+:104550000FC020D10F0000006C1004C060CB55DBF1
+:1045600030DC40055D02022A025BFF94292102092A
+:10457000084CC882D2A0D10F2B2014B0BB2B24141E
+:104580000B0C41CBC57DB7EBC0C10C9C022C2502A6
+:10459000D2A0D10F0000022A02033B02066C02C027
+:1045A000D0C7F72E201428310126250228240A0F0F
+:1045B000EE012E241458010E63FFA300262406D218
+:1045C000A0D10F006C1006282102D62008084C65E7
+:1045D000809D2B200C12E0F70CB811A2882A82864D
+:1045E000B5497A930260009719E0F409B90A299253
+:1045F000A36890082A620009AA0C65A08228828517
+:104600001CE0FF6480799C80B887B14B9B819B1034
+:10461000655074C0A7D970280A01C0D0078D380D25
+:104620000D42CBDE1FE0E01EE0E12EF67ED830D357
+:104630000F6D4A0500808800908C2E3008C0A000C5
+:10464000EE322E740028600C19E0E30C8D11A2DD0F
+:10465000A988C0202CD2852284CFD2A00CBC0B2CE0
+:10466000D685D10FC0F0038F387FA0C063FFB400A0
+:10467000CC582A6C74DB30DC405807F6C020D10FD0
+:10468000DA605809C663FFE7DD402A6C74C0B0DC0D
+:104690007058086A2E30088B1000EE322E740028F5
+:1046A000600C19E0CC0C8D11A2DDA988C0202CD2A1
+:1046B000852284CFD2A00CBC0B2CD685D10F000054
+:1046C0006C1004292014282006B19929241468812B
+:1046D00024C0AF2C0A012B21022C24067BA004C08D
+:1046E000D02D2502022A02033B02044C02C0D058FE
+:1046F00000C0D2A0D10FC020D10F00006C1004293F
+:104700003101C2B429240A2A3011C28378A16C7BFA
+:10471000A1696450472C2006C0686FC562CA572D36
+:1047200020147CD722DA20DB30DC40DD505BFFA593
+:10473000292102090E4CC8E2C020D10FC0F10F9F01
+:10474000022F2502C020D10FDA20DB30C0C05BFF72
+:10475000DC28201406880228241463FFC7292015AA
+:104760001BE0972A200BC0C09C240BAA092BA11C7C
+:104770002C2415AB9929A51C63FF9900C020D10FEB
+:10478000DA20DB30DC40DD50C0E058087DD2A0D11B
+:104790000F0000006C1004CB5513E09225221F0D72
+:1047A000461106550CA32326221E25261F06440B60
+:1047B00024261E734B1DC852D240D10F280A80C038
+:1047C0004024261FA82828261E28261DD240D10FA7
+:1047D000C020D10F244DF824261E63FFD80000000E
+:1047E0006C1004D620282006C0706E85026000D4AC
+:1047F0001DE07919E07112E06F2A8CFC64A1302B66
+:104800006102B44C0B0B4C65B0A22B600C8A600C9F
+:10481000B8110288082E828609B90A7EC302600098
+:104820009A2992A368900509AA0C65A08E28828512
+:10483000648088B8891BE07594819B80655155C060
+:10484000B7B8382A0A01C0C009AC380C0C4264C0A1
+:10485000421FE0541EE0562EF67EB04AD30F6DAADA
+:104860000500808800908CC0A029600C0C9C11A2CF
+:10487000CC2BC285AD990B4B0B2BC6852860062728
+:1048800094CF6881222D6015D2A0C9D2C0E22E64D7
+:1048900006D10F00C0F008AF387FB0BD63FFB10094
+:1048A000276406D2A0D10F00D2A0D10F00CC57DAD6
+:1048B00060DB30DC405808A7C020D10FDA6058090F
+:1048C0003763FFE80028221E29221DD30F789901A3
+:1048D000C080C1D6C1C11BE043C122AB6B64804222
+:1048E00078913F2A80000CAE0C64E0BB02AF0C64F0
+:1048F000F0B52EACEC64E0AF0DAF0C64F0A92EACBB
+:10490000E864E0A32FACE764F09D2EACE664E0978A
+:104910002F800708F80BDA807B83022A8DF8D8A055
+:1049200065AFBC28612308D739D97060007B0000CF
+:104930002B600C0CB811A2882C82862A0A087CAB4A
+:104940007E09BA0A2AA2A368A0052C62007AC96F60
+:104950002A828564A0691FE029276504C0E3C0C4DA
+:104960002E64069CA11CE0549FA02E600A97A30C05
+:10497000EE029EA28F600CFF029FA42E60147AEFBD
+:104980004627A417ADBC2F828527C4CF2FFC202F2C
+:10499000868563FE692A6C74C0B1DC90DD405807DF
+:1049A000A71DE00C63FEC100D9A0DA60DB30C2D0E5
+:1049B000C1E0DC4009DE39DD505807F1D2A0D10F4B
+:1049C000DA605808F663FEE4290A0129A4170DBF2E
+:1049D000082E828527F4CF2EEC202E868564500B7E
+:1049E0002A6C74DB4058016AD2A0D10FC020D10FCD
+:1049F0006C10062B221E28221D93107B8901C0B04B
+:104A0000C0C9C03BC1F20406401DDFF6C0E2C0745D
+:104A10000747010E4E01AD2D9E11C0402E0A1464B1
+:104A2000B06E6D084428221D7B81652AB0007EA1EE
+:104A30003B7FA1477B51207CA14968A91768AA1434
+:104A400073A111C09F79A10CC18B78A107C1AE29B8
+:104A50000A1E29B4007CA12B2AB0070BAB0BDAB0DD
+:104A60007DB3022ABDF8DBA0CAA563FFB428B0104D
+:104A700089116987BB649FB863FFDC00647FB463FE
+:104A8000FFD50000646FD0C041C1AE2AB40063FFFF
+:104A9000C62B2102CEBE2A221D2B221E7AB12A8CC1
+:104AA000107CB1217AB901C0B0C9B913DFC1DA20D5
+:104AB00028B0002CB00703880A28824CC0D10B8094
+:104AC00000DBA065AFE7D240D10F8910659FD463AA
+:104AD000FFF300006C1008C0D0C8598C30292102A7
+:104AE0000C0C4760000C8E300E1E5065E19E292193
+:104AF00002C0C116DFB0090B4C65B0908A300A6E57
+:104B00005168E3026000852F629E1BDFA96EF85397
+:104B10002BB22668B0052E22007BE94727629DB79D
+:104B200048CB7F97102B200CB04E0CBF11A6FF294D
+:104B3000F2869E12798B4117DFA007B70A2772A36E
+:104B4000687004882077893029F285DF90D79065D6
+:104B500090652A210419DFD77A9B22DA205806A310
+:104B6000600029002C21041BDFD37CBB18DA20C095
+:104B7000B658069EC95860014CC09063FFCCDA203D
+:104B8000580886600006DA20C0B65808846551359A
+:104B9000DC40DB308D30DA200D6D515806F6C0D088
+:104BA000D3A064A120292102C05184A18CA00404B7
+:104BB000470C0C4763FF3E00C09C8831DBD008F8EF
+:104BC00050089B3828210498116E8823282066AC51
+:104BD0008C0C0C472C24667CBB159F139E148A10EA
+:104BE0008B115807068E148F13C0D02D24668A307F
+:104BF000C092C1C81BDF867FA6099BF099F12CF4F7
+:104C00000827FC106550A4B83ADF70C051C0800777
+:104C1000583808084264806718DF6319DF64298602
+:104C20007E6A420AD30F6DE90500A08800F08CC0AF
+:104C3000A08930B4E37F9628C0F207E90B2C9408D2
+:104C40009B909F912F200C12DF630CF811A68829EE
+:104C50008285A2FF2DF4CFD2A009330B238685D104
+:104C60000F22200C891218DF5B0C2B11A6BBA82287
+:104C70002D24CF2CB285D2A00C990B29B685D10F4B
+:104C8000C087C0900A593879809663FF8ADB30DA92
+:104C900020C0C1C0D05BFF56292102C0D02A9CFE93
+:104CA00065AE4D2D2502C09063FE45009E142A2C52
+:104CB00074C0B1DC70DD405806E18E14C0D01BDF3B
+:104CC00053C1C863FF6AC020D10F00006C100628D2
+:104CD000210216DF3808084C65821929629E6F98F8
+:104CE0000260022019DF332992266890078A200982
+:104CF000AA0C65A20F27629DC0CC6472072B210409
+:104D00008E31C0A0DDA00EFE500ECD386EB8102C36
+:104D10002066B1CC0C0C472C24667CDB026001EFD2
+:104D2000C0C12930081BDF2564909C2F0AFFC0D327
+:104D3000B09E64E1026892136450882A2C74044B7C
+:104D4000025800930AA20206000000002B200C2744
+:104D500021040CBC11A6CC29C286280A087983023A
+:104D60006001B919DF1509B90A2992A36890082EC4
+:104D7000220009EE0C65E1A42EC28564E19E262086
+:104D80000713DF1E6E7B0260019A17DF151FDF1EFF
+:104D900019DF4BC0D228200A93E09DE1A9690F8852
+:104DA0000298E22F90802A9480B1FF07FF029FE3D0
+:104DB0002EC2851FDF080EDE0BAFBF2AF4CF2EC632
+:104DC00085655F76C020D10F2830102930112E3034
+:104DD0001300993200ED326480EE2A30141FDF3860
+:104DE00000AA3278EF050F9E092DE47F1EDF36669C
+:104DF000A0050F98092A8480B4A718DF33C76F0075
+:104E00009104AE9EDDE000AF1A00C31A6EE1052DDD
+:104E1000B2000DED0C1EDF2D08D81C063303AE8842
+:104E20002A848B2EB02E27848C03EE010FEE022EE7
+:104E3000B42E58018F63FEFF29310829250428303C
+:104E4000142E3109B0886480A32E240AC0812E302C
+:104E5000162CB4232E240BB4EF2F240C8C378B3656
+:104E6000292504DEB0DFC00C8F390B8E390FEE021E
+:104E700064EEC4089F1101C4048D380CB81800C436
+:104E8000040CBE1800EE110EDD02C0E30EFF021E80
+:104E9000DF019F719E701EDF008F2098739D740547
+:104EA000FF110BCD53C18098750FDD020EDD029D01
+:104EB000721EDEBF2A24662F629D2AE4A22FFC18F0
+:104EC0002F669D63FE710000002F30121BDF010072
+:104ED000FA3278FF050B980B2A847F66D0050B9A6F
+:104EE0000B2DA4802A301100AA3263FF442F240A1C
+:104EF0009E2B63FF56CC57DA20DB30DC4058071579
+:104F0000C020D10F00DA20C0B65807A463FFE50027
+:104F1000DA7058063AC0A02A246663FE02DA2058E6
+:104F2000079F63FFCFB16928200A862009094799A6
+:104F30001129240798107F812693E027E50A9AE338
+:104F400088109DE119DEDD8D11096F029FE42DE4CB
+:104F500016098802C0D398E22A240763FE51000094
+:104F60001DDEA60868118F11892B93E008FF02C08F
+:104F70008F9FE50D990299E2047F11C0D49DE1084D
+:104F8000FF029FE463FFD0006C1004C020D10F002B
+:104F90006C100485210D381114DE848622A42408A7
+:104FA000660C962205330B9321743B13C862D230F2
+:104FB000D10FC030BC29992199209322D230D10F32
+:104FC000233DF8932163FFE36C100AD62094181751
+:104FD000DE79D930B83898199914655252C0E1D2A7
+:104FE000E02E61021DDE760E0E4C65E1628F308E82
+:104FF000190F6F512FFCFD65F1558EE129D0230E5D
+:105000008F5077E66B8F181EDEB3B0FF0FF4110FD1
+:105010001F146590CE18DEB08C60A8CCC0B119DE2C
+:105020006428600B09CC0B0D880929811C28811A82
+:105030002A0A0009880C08BA381BDEA60CA90A291E
+:1050400092947B9B0260008C2B600C94160CBD111B
+:10505000A7DD29D286B8487983026000D219DE56CE
+:1050600009B80A2882A398176880026000A360002C
+:10507000A51ADE9A84180AEE01CA981BDE4D8C1917
+:105080002BB0008CC06EB3131DDE4A0C1C520DCC2D
+:105090000B2DC295C0A17EDBAE6000380C0C5360B6
+:1050A000000900000018DE8C8C60A8CCC0B119DEAD
+:1050B0004028600B09CC0B0D880929811C28811A16
+:1050C0002A0A0009880C08BA380CA90A2992947E89
+:1050D000930263FF72DA60C0BA580730645073609D
+:1050E000026600001ADE338C192AA0008CC06EA361
+:1050F0001A18DE2F0C1C5208CC0B18DE762BC2952A
+:10510000C0A178B30263FF3F63FFC9000C0C536377
+:10511000FF09896078991829D285C9922B729E1D42
+:10512000DE246EB8232DD226991369D00B60000DB2
+:10513000DA6058071A6000170088607D890A9A1A99
+:1051400029729D9C129915CF95DA60C0B658071345
+:105150006551F58D148C18DBD08DD0066A020D6D6B
+:1051600051580584D3A09A1464A1DD82A085A1B80A
+:10517000AF9F190505470202479518C05163FE60AD
+:105180002B6104C08C8931C0A009F950098A386E9E
+:10519000B81F2C6066A2CC0C0C472C64667CAB114B
+:1051A0009F119E1B8A155805958E1B8F11C0A02A32
+:1051B00064669F1164F0E12912032812096DF91742
+:1051C0002F810300908DAEFE0080889F9200908C0E
+:1051D000008088B89900908C65514E8A10851A8B92
+:1051E000301FDE06881229600708580A2C82942D89
+:1051F00061040ECC0C2C86946FDB3C1CDE30AC9C26
+:1052000029C0800B5D50A29909094729C48065D047
+:10521000DA2E600CC0D01FDDEF0CE811AFEEA788CE
+:105220002282852DE4CF02420B228685D2A0D10FA7
+:105230008E300E0E4763FDA6A29C0C0C472C640713
+:105240007AB6CD8B602E600A280AFF08E80C6481CC
+:105250000E18DE1983168213B33902330B2C341661
+:105260002D350AC02392319F30C020923308B202FC
+:1052700008E80292349832C0802864072B600CD270
+:10528000A01CDDD40CBE11A7EE2DE285ACBB28B46A
+:10529000CF0D9D0B2DE685D10F8B1888138D30B85F
+:1052A0008C0D8F470D4950B4990499100D0D5F0472
+:1052B000DD1009FF029F800DBB029B8165508D852B
+:1052C0001AB83AC0F1C0800CF83808084264806B04
+:1052D0001BDDB519DDB629B67E8D18B0DD6DDA059A
+:1052E00000A08800C08CC0A063FEF30082138B1660
+:1052F0001DDDC628600AC0E02EC4800D880202B2FF
+:105300000B99239F20C0D298229D2122600CB2BB12
+:105310000C2D11A7DD28D28508BB0B18DDAE2BD6CE
+:1053200085A8222E24CFD2A0D10F9E1B851A2A6CCD
+:10533000748B185BFF178E1B63FEA300C087C090A1
+:105340000AF93879809263FF86C020D10F9E1B2A0C
+:105350006C74C0B18D185805398E1B851A63FE7E9A
+:10536000886B8213891608BE110ECE0202920B9E24
+:1053700025B4991EDDA19F200E88029822C0EF045B
+:10538000D8110E88029824C0E49E21C080D2A02BA0
+:10539000600C2864071CDD8F0CBE11A7EE2DE28582
+:1053A000ACBB28B4CF0D9D0B2DE685D10F000000BE
+:1053B0006C1004C020D10F006C10048633C071C083
+:1053C00030600001B13300310400741A04620174CA
+:1053D00060F1D10F6C1004022A02033B025BFFF65E
+:1053E0001CDD771BDDBFC79F88B009A903098A01AF
+:1053F0009AB079801EC0F00FE4311DDD6E0002000E
+:105400002BD2821EDDB82AC1020EBB022BD6820A25
+:10541000E431D10F28C102C19009880208084F2841
+:10542000C50208E431D10F006C1004C0C00CE43197
+:1054300012DD631ADD6000020029A28218DDAC1BB8
+:10544000DDAA2621020B990108660129A6822625DC
+:105450000206E43114DDA715DDA2236A902326128B
+:105460008550242611252613222C40D10F00000040
+:105470006C1008D6102B0A64291AB41ADD4D0D23BE
+:10548000111CDD4E0F2511B81898130E551118DD9B
+:1054900099AC55A838AA332C80FF2A80FEA933285E
+:1054A0008D0129800108AA112880000CAA02088811
+:1054B0001109880208AA1C288C08281604580862BA
+:1054C00014DD3F0AA7022441162A30802B1204075C
+:1054D000AA2858085DB1338B13B4559A6004AC28E0
+:1054E000B4662C56277B69E016DD769412C050C056
+:1054F000D017DD329D15D370D4102F60802E6082BE
+:105500009F169E17881672891A8D128C402A607F0A
+:105510000DCC282B3A200CAA2858084BC0B10ABE43
+:10552000372E35408F1772F91A8D128C402A608100
+:105530000DCC282B3A200CAA28580843C0B10ABE2B
+:10554000372E3542B233B444B1556952B6B466C051
+:10555000508F15B877D370B2FF9F156EF899D10FA1
+:105560006C1004C021D10F006C1004270A001CDD50
+:10557000111FDD221EDD251DDD0E1ADD501BDD5E37
+:10558000C02824B0006D2A75AA48288080C0916484
+:10559000806100410415DD09C03125502E00361A06
+:1055A0000655010595390C56110C66082962966E50
+:1055B000974D0D590A29922468900812DD42024243
+:1055C0000872993B23629512DD06CB349F3002822C
+:1055D000020E4402C092993194329233AD52246249
+:1055E00095C090244C1024669524B0002924A0AACC
+:1055F00042292480B177B14404044224B400D10F7D
+:10560000D10FD10F6C10041ADCEA2AA00058021C3A
+:105610005BFFD5022A02033B025BFFD11BDCE8C91A
+:10562000A12CB102C0D40DCC020C0C4F2CB5020C35
+:10563000E431D10FC0A00AE43118DCDE0002002FF3
+:10564000828219DCF12EB10209FF022F86820EE45C
+:1056500031D10F006C1004C02002E43114DCD816E4
+:10566000DCD5000200226282234102732F0603E48C
+:1056700031C020D10F19DD221ADD212841020A2A6A
+:10568000010988012A668228450208E43115DD18DF
+:1056900012DD1D25461DD10F6C1004292006289C03
+:1056A000F96480A02A9CFD65A0968A288D262F0A81
+:1056B000087AD9042B221FC8BD2C206464C0812E17
+:1056C00022090EAE0C66E0782B200C1EDCBA0CBC56
+:1056D00011AECC28C28619DCB878F3026000AD099F
+:1056E000B90A2992A36890082E220009EE0C65E001
+:1056F0009B29C2851FDCC26490929F90C0E41FDC8E
+:10570000CE9E9128200AC0E09E930F88029892882E
+:10571000200F880298942F20079A979D962F950A1C
+:105720002E240728200629206468833328C2851286
+:10573000DCA9288C20A2B22E24CF28C685C020D177
+:105740000FC020D10F2A206A0111020A2A4165AF39
+:1057500052DA20C0B05805E464AFE5C021D10F0093
+:10576000649FC81FDC962D20168FF209DD0C00F116
+:105770000400DD1AADAD9D2912DC9728C285A2B2C6
+:105780002E24CF288C2028C685C020D10FC021D13F
+:105790000F0000006C1004260A001BDCDB15DC8700
+:1057A00028206517DC84288CFE6480940C4D110D34
+:1057B000BD082CD2F52BD2F42ED2F77CB13DB4BB70
+:1057C0002BD6F47BE9052BD2F62BD6F47CB92C2A08
+:1057D000D2F62AD6F52AD6F406E431000200287261
+:1057E000822AFAFF004104290A012F510200991A66
+:1057F0000A99030988012876820FE4312624652B53
+:10580000D2F48E5A2CD2F5B0EE9E5A7BCB1629D20A
+:10581000F62FD2F70CB80C09FF0C08FF0C0F2F1451
+:10582000C8F96000320BCA0C0A2A14CEA92B510207
+:10583000C0C20CBB020B0B4F2B55020BE431D10F36
+:1058400000DB30DA205BFF941BDCB064AF5D0C4DF5
+:1058500011ADBD63FFA8000006E4310002002F7205
+:105860008218DC6E2E510208FF022F76820EE43180
+:10587000D10F00006C1004C03003E43116DC4E156B
+:10588000DC4F00020024628274472118DCA0875A92
+:10589000084801286682CD7319DC9E0C2A11AA994A
+:1058A0002292832992847291038220CC292B510267
+:1058B0000BE431C020D10F001FDC972E51020FEEF8
+:1058C000012E55020EE431B02DB17C9C5A12DC92AF
+:1058D00008DD112D5619D10F6C10061BDC351EDCAE
+:1058E0003722B0001ADC8E6F23721DDC75C0481899
+:1058F000DC8D1FDC8BDC10D5C083F000808600506F
+:105900008A6D4A4F0F35110D34092440800B560A19
+:10591000296294B1330E55092251400F44110C44B1
+:105920000A874009A80C02883622514107883608A8
+:10593000770CA8992966949740296295874109A810
+:105940000C02883607883608770CA899296695973F
+:1059500041030342B13808084298F0D10F1CDC72B1
+:1059600013DC7327B0002332B5647057C091C0D0E8
+:1059700016DC7115DC6FC0402AC00003884328C4C0
+:10598000006D793C004104B14400971A7780148E71
+:10599000502FB2952DB695AFEE2EED2006EE369E29
+:1059A0005060001877A00983509D5023B695600081
+:1059B0000223B295223D2006223622B695B455B870
+:1059C000BBD10F0003884328C400D10F6C1004C062
+:1059D0004004E43115DC59000200885013DC58CB38
+:1059E000815BFFBD1CDC570C2D11ADCC2BC2822A74
+:1059F000C28394507BAB142EC28429C2850ABD0C8D
+:105A00000E990C0D990C0929146000050BA90C09BD
+:105A10002914993015DBEA2A51020AE4312A2CFCB8
+:105A200058004B2B32000AA2022BBCFF9B30CCB695
+:105A3000C8A4D2A0D10F000004E4311EDBDE0002B6
+:105A4000002DE2822FBAFF2C51020FDD012DE682DC
+:105A50000CE431D10F0000006C1004D10F000000E5
+:105A60006C1004C020D10F006C100413DC36C0D1C0
+:105A700003230923318DC0A06F340260008D19DB30
+:105A8000CD1BDBCE17DC2F0C2811A87726728325BF
+:105A900072822CFAFF76514788502E7285255C045D
+:105AA00025768275E9052572842576827659292E18
+:105AB00072842E76822E76830AE4310002002392CD
+:105AC000820021042FB10200D61A0C6603063301AE
+:105AD0002396820FE43126728325728260000200D1
+:105AE000D8A07659220AE4310002002392820021D4
+:105AF0000400D21A2FB1020C220302320122968234
+:105B00000FE431D280D10F00D280D10FC020D10F4D
+:105B10006C1004DB30862015DBA6280A002825023D
+:105B2000DA2028B0002CB00705880A28824C2D0AFC
+:105B3000010B8000DBA065AFE61ADB9F0A4A0A2949
+:105B4000A2A3C7BF769101D10F2BA6A3D10F00004E
+:105B50006C1004C0D1C7CF1BDB9919DB9617DB94FF
+:105B60000C2811A87786758574C0A076516288507C
+:105B70008E77B455957475E90385769574765927B3
+:105B80008F769F759F740AE431000200239282B4DD
+:105B90002E2FB10200E10400D61A0C660306330171
+:105BA0002396820FE431867583747639280AE431AE
+:105BB0000002002E9282B42200210424B10200DFF0
+:105BC0001A0CFF030FEE012E968204E431D280D12D
+:105BD0000FD8A07651D6D280D10F00006C100429C6
+:105BE0000A801EDB9A1FDB9A1CDB730C2B11ACBBEB
+:105BF0002C2CFC2DB2850FCC029ED19CD0C051C064
+:105C00007013DB9614DB9518DB932AB285A8280461
+:105C1000240A234691A986B8AA2AB685A98827848A
+:105C20009F25649FD10F00006C100419DBC70C2A5C
+:105C300011A9A98990C484798B761BDBB5ABAC2AFA
+:105C4000C2832CC2847AC1688AA02BBC30D3A064E2
+:105C5000A05E0B2B0A2CB2A319DB7F68C0071DDBEB
+:105C6000BBD30F7DC94AA929299D0129901F68919D
+:105C70003270A603D3A0CA9E689210C7AF2AB6A3FB
+:105C80002A2CFC5BFFB3D230D10F000013DBB10331
+:105C9000A3018C311DDB510C8C140DCC012CB6A34F
+:105CA00063FFDC00C020D10FDA205BFFCCC020D125
+:105CB0000FC020D10F0000006C1004DB30C0D019E1
+:105CC000DB3CDA2028300022300708481209880A15
+:105CD00028824CDC200B80001BDB370C4A11ABAA5E
+:105CE00029A28409290B29A684D10F006C1004C0B5
+:105CF0004118DB3017DB320C2611A727277030A89C
+:105D000066256286007104A35500441A7541482235
+:105D1000628415DB5202320BC922882117DB2F085F
+:105D20008414074401754905C834C020D10FD10F30
+:105D30000809471DDB86C0B28E201FDB1D0E0E43F7
+:105D4000AFEC2BC4A00FEE0A2DE6242A6284C020FB
+:105D50000A990B296684D10FC020D10F6C1004DB87
+:105D600030C0D018DB13DA20253000223007085865
+:105D70000A28824CDC200B80008931709E121BDBCC
+:105D80000D0C4A11ABAA29A28409290B29A684D19A
+:105D90000F09C95268532600910418DB08C0A12FCF
+:105DA000811200AA1A0AFF022F85121EDB020C4D77
+:105DB00011AEDD2CD2840C2C0B2CD684D10FC081DB
+:105DC0001FDAFFB89A0A0A472EF11200A1040088D0
+:105DD0001A08EE022EF5121DDAF70C4C11ADCC2B81
+:105DE000C2840B2B0B2BC684D10F00006C1004DB7C
+:105DF00030C0D019DAEFDA202830002230070988C5
+:105E00000A28824CDC200B80001CDAEA0C4B11AC17
+:105E1000BB2AB2840A2A0B2AB684D10F6C1004C0A4
+:105E20004118DAE416DAE60C2711A626266030A817
+:105E300072252286006104A35500441A7541082288
+:105E4000228402320BD10F00C020D10F6C10041538
+:105E5000DB410249142956112452120208430F88CB
+:105E600011C07300810400361A008104C78F0077C7
+:105E70001A087703074401064402245612D10F0082
+:105E80006C10066E23026000AC6420A7C0A08510D1
+:105E900013DB1916DB30C040A6AA2BA2AE0B1941AA
+:105EA00064906668915D68925268933C2AA2AA2821
+:105EB0003C7F288C7F0A0A4D2980012880002AAC6B
+:105EC000F20888110988027589462B3D0129B00026
+:105ED0002BB0010899110B99027A9934B8332A2A08
+:105EE00000B1447249B160004A7FBF0715DB1B63F4
+:105EF000FFB90000253AE863FFB10000253AE863E6
+:105F0000FFA90000250A6463FFA1C05A63FF9C003B
+:105F100000705F082534FF058C142C34FE70AF0B25
+:105F20000A8D142E3D012AE4012DE400DA405BFDC8
+:105F30005063FFA7D10FD10F6C10041ADAA019DA41
+:105F40009D1CDB061BDB07C080C07160000D0000DC
+:105F50000022A430B1AA299C107B915F26928679F9
+:105F6000C2156E6262C0206D080AB12200210400D1
+:105F7000741A764BDB63FFEE2292850D63110325C5
+:105F800014645FCFD650032D436DD9039820B422FB
+:105F90000644146D49229820982198229823982429
+:105FA00098259826982798289829982A982B982CED
+:105FB000982D982E982F222C4063FF971EDA7E276B
+:105FC000E68027E681D10F00C02063FF8300000038
+:105FD0006C1004C062C04112DA791ADA7513DAE182
+:105FE0002AA00023322D19DADB2BACFE2992AE6EEB
+:105FF000A30260008E090E402D1AC2C2CD0EDC39FC
+:106000002C251664B0895BFF9E15DAD71ADAD12BDE
+:106010003AE80A3A0158058C2B21160ABB28D3A06E
+:106020009B505805A32B52000ABB082A0A005805AA
+:10603000A215DACE2D21022C3AE80C3C2804DD0210
+:106040002D25029C5058059A8B50AABBC0A158051B
+:106050009A1CDAC72D21020C3C2806DD0213DAC592
+:106060002D25029C305805928B30AABBC0A2580542
+:10607000922A2102C0B40BAA020A0A4F2A2502580A
+:1060800005A6D10F242423C3CC2C251663FF76004C
+:1060900018DABD1CDAB919DABA1BDAB817DA8B8547
+:1060A000202E0AFD1FDAB92D202E24F47A24F47E46
+:1060B00024F4820EDD0124F4862E0AF70755280603
+:1060C000DD02C0750EDD01050506AB5BA959C0E810
+:1060D000AC5C24C4AB0EDD0227C4AC2E0ADFA8558D
+:1060E00027B4EC0EDD0124B4EBC2E027942C0EDDC6
+:1060F0000224942B2E0A800D0D4627546C24546BD9
+:106100000EDD022D242E63FEFC0000006C10042A1C
+:106110000A302B0A035BFF4D12DA8FC39029261633
+:10612000C3A1C0B3C08A2826175BFF48C03CC3B1D7
+:106130002B26161ADA222AA02023261764A079C358
+:10614000A2C0B15BFF42C3A2C0B15BFF40C3C22C7F
+:106150002616C2AFC0B12326175BFF3CC28F28268C
+:1061600016C0FE2F2617C2E22E26162A0AA1C0B19B
+:10617000C0D82D26175BFF352A0AA12A2616C3A6EA
+:10618000C0B3C1922926175BFF31C3C62C2616C1A6
+:10619000B32A0AA22B2617C0B35BFF2C290AA22917
+:1061A0002616C185282617C2FB2F2616C0E72E26E5
+:1061B000171DDA762D2610D10FC3A2C0B35BFF23C3
+:1061C00063FF82006C10041CDA3F1BDA2C18DA70B3
+:1061D00017DA7116DA7115DA71C0E0C0D414DA3B3F
+:1061E0001FD9F7C0288FF06D2A36DAC0D9C07C5B82
+:1061F000020FC90C1CDA350C9C28A8C3A6C22A368B
+:10620000802A2584A4C2A7CC2D248C2B248A2B245D
+:10621000872E248BB1BB2E369F2C369E2C369DB1FB
+:10622000AC1CDA161BDA5FC0286D2A33DAC0D9C07D
+:106230007C5B020FC90C1CDA240C9C28A8C3A6C2E4
+:106240002A36802B2584A4C2B1BBA7CC2D248C2E4A
+:10625000248B2A248A2E369F2C369E2C369DB1AC58
+:10626000C07919DA141BDA5113DA4F1ADA4F18DA37
+:106270005014DA1516DA5004F42812DA4F04660CBA
+:10628000040506A252A858AA5AA3539B3029A50078
+:1062900027848AC091C0A52A848C29848B17DA4868
+:1062A00018DA47A75726361D26361E2E361F16DA51
+:1062B0004513DA45A65504330C2826C82E75002D43
+:1062C00054AC2E54AB2E54AA2326E62326E52E26C4
+:1062D000E7D10F006C100613DA2317DA1E24723D83
+:1062E0002232937F2F0B6D08052832937F8F026334
+:1062F000FFF3C0C4C0B01AD9B1C051D94004593954
+:1063000029A4206E44020BB502C3281ED9ACDDB00F
+:1063100025E422052D392DE421C0501EDA2C19DA8E
+:106320001C18DA1C16DA1E1DDA2A94102A72451778
+:10633000D9E76DA94BD450B3557A5B17DF50756B15
+:10634000071FD99E8FF00F5F0C12D9DF02F228AE23
+:106350002222D681D54013D9DC746B0715D99885D4
+:106360005005450C035328B145A73FA832A9332255
+:10637000369D22369E2436802B369F2BF48B2CF4B0
+:106380008C14D9F824424DC030041414C84C6D0844
+:1063900006B133041414C84263FFF20015D985C452
+:1063A000400031041AD986C0D193A200DD1AC13849
+:1063B000B0DD9DA318D9EC2B824D29824E29A51C56
+:1063C0002882537A871E2C54008E106FE45D12D9F8
+:1063D0007B2F211D23211C2F251B04330C23251C5F
+:1063E00023251AD10FC06218D9DB88807E87D9890E
+:1063F000102654006F94191BD9712AB11C0A1A1463
+:1064000004AA0C2AB51C2AB51D2AB51A2AB51BD117
+:106410000F1BD96A2AB11C0A1A1403AA0C2AB51C2C
+:106420002AB51D2AB51A2AB51BD10F001CD9642B19
+:10643000C11D2DC11C2BC51B03DD0C2DC51C2DC57D
+:106440001AD10F006C100619D95D14D9C212D9C522
+:1064500015D9E0C73FC0E02E56A82E56A92E56AA41
+:106460002E56AB23262918D985DB101CD9DAC0D4C7
+:106470002A42452D16019C1000B0890A880C2896E6
+:10648000005BFF942B22E318D94D0B5B149B842AED
+:1064900022E48B84B1AA0A5A140BAA0C9A852922E9
+:1064A000E509591499862F22CD0F5F149F875BFF52
+:1064B000455BFF1623463BC1B01DD9401CD99E2A1F
+:1064C000D1022C463A0BAA020A0A4F2AD5025804D6
+:1064D000925BFEBF5BFE98C050C0B016D93614D98F
+:1064E0003E17D9AEC0C0C73E93122C262DC03060D7
+:1064F00000440000007F9F0FB155091914659FF4F7
+:10650000C0500AA9027FA7EF18D92ADA5008580A02
+:1065100028822C2B0A000B8000005104D2A0C091CD
+:10652000C7AF00991A0A99039912CE3864206BD329
+:10653000202B20072516032C12022A62827CA863D6
+:1065400018D91C01110208580A28822CDA500B8035
+:1065500000D2A0643FD58A310A8A1404AA01C82A4D
+:106560002B22010B8B1404BB017BA945DDA07A7B98
+:10657000081DD9122DD2000DAD0CDB3019D90D1A22
+:10658000D95288130ADA28DC801DD99009880A2894
+:10659000823C0DAA080B8000652F93D320C0B06306
+:1065A000FF9400007FAF34B1550050040A0919630D
+:1065B000FF42DAB07B7B081AD9012AA2000ABA0C82
+:1065C0001BD9428C310BAB280C8A141CD980ACBB74
+:1065D0001CD98004AA012BC68163FF8F645F60C051
+:1065E00050C0B0C7CE9C1263FF5500006C1004274A
+:1065F000221EC08008E4311BD8EF0002002AB282BC
+:1066000019D8EF003104C06100661A2991020A6AA4
+:10661000022AB68209E43115D94A0C3811A8532848
+:1066200032822432842A8CFC7841102921022A36B5
+:106630008297A0096902292502D10F002B21022C83
+:1066400032850B6B022CCCFC2C368297C02B25029A
+:10665000D10F00006C1004C0E71DD8D21CD8D40D97
+:106660004911D7208B228A200B4B0BD2A007A80CF4
+:106670009B72288CF4C8346F8E026000A31FD8CAA6
+:10668000A298AF7B78B334C93DC081C0F0028F3887
+:106690000F0F42C9FA2CD67ED5206D4A05003088EE
+:1066A00000508C887008980878B16DD2A09870D18D
+:1066B0000FC0F0038F387FE0DE63FFD8027B0CAFA2
+:1066C000BB0B990C643047D830C0F1C05002F5388C
+:1066D0000505426450792CD67E0B36122F6C100FB4
+:1066E0004F366DFA0500808800208C06440CC0816E
+:1066F000C05003B208237C0C038538050542645062
+:106700005A2CD67ED30F6D4A0500208800308CD2DB
+:10671000A0A798BC889870D10FD2A0BC799970D1ED
+:106720000FD2302BAD08C0F1C0500BF53805054233
+:10673000CB542CD67E083F14260A100F660C064652
+:10674000366D6A0500208800B08C827063FF2D00D2
+:10675000C05003F53875E08063FF7A00C0600286A0
+:106760003876E09F63FF9900C05003F53875E0C4A8
+:1067700063FFBE006C1004D62068520F695324DA00
+:1067800020DB30DC405800F3D2A0D10FDA20DB3020
+:10679000DC405800F09A2424240EC02122640FC04B
+:1067A00020D10F00B83BB04C2A2C7489242D200E28
+:1067B0002E200FA4DDB1EE2E240FB0DD2D240E28E7
+:1067C00090072D9003A488B088B1DD2D9403289400
+:1067D000075BFFA069511DC0E082242A600F18D812
+:1067E000FE2A240329600E8F2029240708FF029F18
+:1067F000209E64D10FC020D10F0000006C100494C3
+:106800002319D8F6C0B3083A110BAA02992019D857
+:10681000699A2116D867C05028929D2564A2288CB9
+:106820001828969DD10F00006C1004282066C038EF
+:10683000232406B788282466D10F00006C100603B5
+:106840005A0C0D36110D5C11D8208B2282210CBB05
+:106850000C06550F9B8202320B928113D853D9201C
+:10686000A38F6450561CD84FC0D71BD850A256C017
+:10687000E1C09004E93809094276F34F044302CAA3
+:10688000912BC67ED30F6DAA0500208800308C891D
+:1068900081A95909FA0C64A07D99818A8264A00FAC
+:1068A000D290D10FC06002E63876D0D763FFD10016
+:1068B000C020BC89998199809282D10F7F230429BD
+:1068C0002DF8998165BFD863FFE50000028F0CA306
+:1068D000FF0F3312931003AA0CD3406490402BC6D1
+:1068E0007E8610D30F6D6A0500208800308CBC8234
+:1068F000C090A4F3C041034938090942CA9B2BC682
+:106900007E6DAA0500208800308C0F590CA989BC27
+:1069100099998163FF8400BC89998163FF7C00C0E1
+:106920006002E63876D0B963FFB300C07002473822
+:1069300077D0CD63FFC700006C100414D82AC15271
+:10694000A424CA3128221D73811C292102659016B6
+:106950002A300075A912022A02033B022C3007C01C
+:10696000D25801D0653FDCD10F2B300703BB0B0B96
+:10697000BA0274B3022ABDF8D3A063FFC4000000BA
+:106980006C1004292006C0706E9741292102C08F27
+:106990002A2014C0B62B240606AA022A24147980C1
+:1069A000022725022A221E2C221D7AC10EC8ABDA2C
+:1069B00020DB302C0A00033D025BF80D6450742D7F
+:1069C00021020D0D4CC9D3C020D10F00002E9CFB1D
+:1069D00064E0822F21020F0F4C65F0911AD7F61C4C
+:1069E000D7F429A29EC08A798B5D2BC22668B00499
+:1069F0008D207BD95229A29DC0F364904A97901DA7
+:106A0000D8062E21049D9608EE110FEE029E979E49
+:106A10009118D802C0E527C4A22E24062BA29D2FD0
+:106A200021022BBC3008FF022F25022BA69DC0207F
+:106A3000D10F00002F300068F939DA20DB30044C28
+:106A40000258004463FF7700022A022B0A0658000E
+:106A5000D3220A00D10F6550102830006889240223
+:106A60002A02033B02DC4058003BC020D10FD27009
+:106A7000D10F00002A2C74033B02044C025BFEF58C
+:106A800063FF3B00DB30DC402A2C745BFEF2C0204D
+:106A9000D10F00006C1004C83F89268829A399995A
+:106AA0002609880C080848282525CC52C020D10F7B
+:106AB000DB402A2C745BF936D2A0D10F6C1004D8BD
+:106AC00020D73082220D451105220C928264207459
+:106AD00007420B13D7B5D420A383732302242DF8C8
+:106AE000858074514CBC82C0906D081600408800AF
+:106AF000708C773903D720C0918680743901D420F7
+:106B000074610263FFE2CA98C097C0411BD835C0C8
+:106B1000A00B8B0C0B4A380A0A42C9AA1DD7A21C2B
+:106B2000D7A32CD67EC140D30F6D4A050020880024
+:106B3000308C9780D270D10FBC8FC0E00F4E387E62
+:106B400090E263FFD6BC8292819280C0209282D173
+:106B50000F0000006C1006C0D71CD7921BD7940DF5
+:106B60004911D7202E221F28221D0E4E0BD280073E
+:106B70008A0C2E761F2AAC80C8346FAE026000CB20
+:106B80002F0A801AD798A29EAA7A7EA33FC93FC037
+:106B9000E1C05002E538050542CA552BC67EDB2010
+:106BA000D30F6D4A0500308800B08C2E721DAE9E4A
+:106BB0000EA50C645086D2802E761DC091298403C8
+:106BC000D10FC05003E53875D0D363FFCD15D785FD
+:106BD000027E0CA5EE643051C0A1250A0002A53842
+:106BE000033A020505426450922BC67E0E3512957B
+:106BF00010255C10054536D30F6D5A0500A088009E
+:106C0000208CC0A1A3E2C05023FA8003730C03A51B
+:106C100038AF730505426450722BC67E851005455A
+:106C20000C6D5A0500208800308CD280C0A10E9BCC
+:106C30000CAB7BAFBB2B761D2A8403D10FD280C057
+:106C4000C1AF7D2D761D2C8403D10F00D2302E8D47
+:106C500008C0F1C0500EF538050542CB592BC67E51
+:106C60000A3F14C1600F660C064636D30F6D6A05E5
+:106C700000208800E08C22721D63FF03C061C050B9
+:106C800003653875D80263FF6263FF5CC05002A5DC
+:106C90003875D08763FF8100C06003F63876D0BFB7
+:106CA00063FFB9006C10042A201529201614D7435D
+:106CB0000A990CCB9D2E200B04ED092BD11C8F289B
+:106CC00009BC36ACAA0CBB0C2BD51C0A0A472A24DB
+:106CD00015CAAF8B438942B0A800910400881AA856
+:106CE000FF0FBB029B278F260FB80C783B1AC020E2
+:106CF000D10F0000292102C0A20A9902292502C051
+:106D000021D10F008B2763FFDC2BD11C0CAA0C0AAE
+:106D10000A472A2415ACBB2BD51CC9AE8B438C2843
+:106D20008F42B0AD00F10400DD1AADCC0CBB029B6C
+:106D300027DA20B7EB580019C021D10F9F2763FF36
+:106D4000EF0000006C100428203C643047053060E0
+:106D500000073E01053EB156076539054928C77F42
+:106D6000A933030641076603B166060641A6337ED2
+:106D7000871E222125291AFC732B1502380C098144
+:106D80006000063E01023EB12406423903220AD1C8
+:106D90000FD230D10FC05163FFC000006C10042728
+:106DA000221EC08008E4311DD7030002002CD282CD
+:106DB0001BD703003104C06100661A2BB1020C6CB2
+:106DC000022CD6820BE43119D7870C3A11AA9328EA
+:106DD00032829780253282243284B45525368275DA
+:106DE000410A292102096902292502D10F2A21021B
+:106DF0002B32830A6A022B36822A2502D10F000029
+:106E00006C100418D6EC0C2711087708267286251A
+:106E10003C04765B1315D6E805220A2222A36820DB
+:106E200002742904227285D10FC020D10F00000006
+:106E30006C100419D6EB27221EC08009770208E4E3
+:106E4000311DD6DC0002002CD2821BD6DC003104BE
+:106E5000C06100661A2BB1020C6C022CD6820BE4C6
+:106E60003119D7600C3A11AA9328328297802532C3
+:106E700082243284B45525368275410B2A21020AB8
+:106E80006A022A2502D10F002B21022C32830B6BC0
+:106E9000022C36822B2502D10F0000006C10041B3F
+:106EA000D6C50C2A11ABAA29A286B438798B221B2D
+:106EB000D6C219D6E80B2B0A2BB2A309290868B051
+:106EC0000274B90D299D0129901F6E920822A28596
+:106ED000D10FC020D10FC892C020D10FDA205BEEB5
+:106EE000B3C020D10F0000006C100414D6B22842A9
+:106EF0009E19D6AF6F88026000BA29922668900763
+:106F00008A2009AA0C65A0AC2A429DC0DC64A0A41A
+:106F10002B200C19D6A90CBC11A4CC2EC28609B901
+:106F20000A7ED30260009A2992A36890078D2009F7
+:106F3000DD0C65D08C25C2856450862D2104C030BF
+:106F40006ED80D2C2066B8CC0C0C472C246665C07E
+:106F50007B1CD72518D6AF1AD6A619D6B61DD6AB28
+:106F6000C0E49E519D508F209357935599539A5644
+:106F70009A5408FF021AD6C29F5288269F5A9E59D9
+:106F80009D58935E9C5D935C9A5B08084805881148
+:106F9000985FC0D81FD6900CB911A499289285AFDC
+:106FA000BF23F4CF288C402896858E262D24069E5C
+:106FB00029C020D10FCA33DA20C0B65BFF78C72FB3
+:106FC000D10FC93ADA205BFF75C72FD10FDBD05B39
+:106FD000FE0B2324662B200C63FF7500C72FD10FF7
+:106FE000C72FD10F6C1004C85B29200668941C6859
+:106FF0009607C020D10FC020D10FDA20DB30DC4053
+:10700000DD502E0A005BFE5ED2A0D10F2E200C18A0
+:10701000D6690CEF11A8FF29F286C088798B791AFE
+:10702000D6660AEA0A2AA2A368A0048B207AB96865
+:1070300023F2856430621BD670290A802C206828D0
+:1070400020672D21040B881104DD1108DD020DCC11
+:1070500002C0842D4A100DCC021DD66898319D3097
+:107060008A2B99379C340BAA02C0C09C359C369A57
+:10707000322A2C74DB4028F285C0D3288C2028F6D5
+:10708000852C25042D24061FD653DD40AFEE2CE4BD
+:10709000CF5BFDEAD2A0D10F00DA20DBE05BFF3F3F
+:1070A000C020D10F6C100AD6302A200624160128E1
+:1070B000ACF86583862B2122C0F22A2124CC572AE2
+:1070C000AC010A0A4F2A25247ABB0260037F2C21D7
+:1070D000020C0C4C65C3192E22158D32C0910EDDA9
+:1070E0000C65D39088381ED63364836B8C37C0B858
+:1070F000C0960CB9399914B49A9A120D9911991332
+:107100008F6718D62EC9FB2880217F83168B142CFD
+:1071100022002A200C5BFF61D4A064A3B38F6760B8
+:10712000002800002B200C89120CBA11AEAA2CA248
+:10713000861DD6217C9B3E0DBD0A2DD2A368D004AE
+:1071400088207D893024A28564436427212E07F797
+:107150003607F90C6F9D01D7F0DA20DB70C1C42D22
+:10716000211F5BFEF889268827DDA009880C7A8B11
+:10717000179A10600006C04063FFCC0000DA208B35
+:10718000105BFEC88D1065A267C0E09E488C649CB1
+:10719000498B658A669B4A9A4B97458F677F730236
+:1071A000600120CD529D10DA20DB302C12015BFEF5
+:1071B000698D10C051D6A08FA7C0C08A68974D9A1C
+:1071C0004C8869896A984E994F8E6A8A69AE7E7733
+:1071D000EB01B1AA9E6A9A698B60C0A00B8E1477EE
+:1071E000B701C0A1C091C08493159D179516C0D05A
+:1071F00025203CC030085801089338C0820833105D
+:10720000085B010535400B9D3807DD100BAB100EF8
+:1072100019402A211F07991003DD020DBB020553F7
+:10722000100933020A55112921250A2A14092914A3
+:107230000499110A99020933028A2B2921040BAA05
+:10724000021BD66A0899110955020855020BAA02B9
+:107250009A408920881408991109880219D5EA1DD5
+:10726000D66409880298418B2A9346954783150D69
+:10727000BB0285168D179B448A658966AACAA97CBC
+:1072800077CB01B1AA07FB0C9C669A6588268E29EC
+:10729000AD87972607EE0C0E0E482E25259B672BF3
+:1072A000200C87131ED5C40CB911AE99289285A75E
+:1072B0008828968517D5C8C090A7BB29B4CF871852
+:1072C00063FE3C008C60C0E0C091C0F0C034C0B828
+:1072D0002A210428203C08AA110B8B0103830103F7
+:1072E0009F380B9B39C03208FF10038801089E3875
+:1072F0000C881407EE100FEE020388010898390578
+:10730000BF1029211F0ABB1107881008FF020BAA12
+:107310000218D5BC09291403AA022B212583200BAE
+:107320002B1404BB110833110FBB020B99028B14F1
+:107330008F2A0B33020833028B2B64708688689780
+:107340004D984C8769886A93419946974E984FC0EB
+:107350007077C701C0719A4718D6260B7C100CECC9
+:107360000208F802984418D6230CBC0208CC029CF0
+:10737000402A200C295CFEC0801FD58E1CD5960C9F
+:10738000AE112B2124ACAAAFEEB0BB8F132CE2853B
+:1073900028A4CFAFCC2CE6852A22152B2524B1AA10
+:1073A0002A26156490DBC9D28F262E22090DFF08EC
+:1073B0002F26060FEE0C0E0E482E25256550E4C034
+:1073C00020D10F00C07093419F4499469A4777C7D8
+:1073D0000A1CD57A2CC022C0810C87381CD6070B1A
+:1073E000781008E80208B8020C8802984063FF8011
+:1073F00000CC57DA20DB608C115BFDD629210268B6
+:107400009806689403C020D10F2B221EC0A0292209
+:107410001D2A25027B9901C0B064BFE813D5652CF5
+:10742000B00728B000DA2003880A28824CC0D10BAC
+:107430008000DBA065AFE763FFCA000068A779DAC8
+:1074400020DB30DC40DD505BFEE7D2A0D10FC16D08
+:10745000C19D29252C60000429252CD6902624675F
+:107460002F2468DA20DB308C11DD502E0A805BFD82
+:1074700044D2A0D10FC168C1A82A252C63FFDD002A
+:107480000000C8DF8C268B29ADCC9C260CBB0C0BD6
+:107490000B482B25252A2C74DB602C12015BFD8701
+:1074A000D2A0D10F2A2C748B115BF6B9D2A0D10FC8
+:1074B000DA205BFE3A63FF3800DA20C0B15BFE8A57
+:1074C00064ABF1655F352D2124B1DD2D252463FFEB
+:1074D0001FDA202B200C5BFE5663FF1412D5C882E6
+:1074E00020028257C82163FFFC12D5C403E8300490
+:1074F000EE3005B13093209421952263FFFC00000B
+:1075000010D5C0910092019302940311D597821077
+:1075100001EA30A21101F031C04004E4160002007B
+:1075200011D5B98210234A00032202921011D5828C
+:10753000C021921004E4318403830282018100009F
+:10754000D23001230000000010D5B09100920193C9
+:1075500002940311D586821001EA30A21101F131A3
+:10756000C04004E41600020011D5A7821013D52BE9
+:10757000032202921004E431840383028201810019
+:1075800000D330013300000010D5A19100810165C6
+:10759000104981026510448103CF1F920193029428
+:1075A0000311D574821001EA30A21101F231C040FA
+:1075B00004E41600020011D593821013D5130322A0
+:1075C00002921004E431840383028201C01091030B
+:1075D00091029101810000D43001430012D542C0D4
+:1075E0003028374028374428374828374C233D0176
+:1075F0007233ED03020063FFFC00000010D585919B
+:107600000092019302940311D5838210921011D538
+:10761000348310032202921011D58012D5469210A5
+:10762000C04004E41600020011D577821013D52D56
+:10763000032202921004E431840383028201810058
+:1076400000D53001530000006C10026E322FD6209E
+:10765000056F04043F04745B2A05440C00410400D8
+:10766000331A220A006D490D73630403660CB122BC
+:107670000F2211031314736302222C01D10FC83B94
+:10768000D10F000073630CC021D10F000000000077
+:1076900044495630C020D10F6C10020040046B4C9E
+:1076A00007032318020219D10F020319C020D10FBA
+:1076B0006C100202EA30D10F6C1002CC2503F031BD
+:1076C00060000F006F220503F1316000056F230594
+:1076D00003F231000200D10F6C1002CC2502F03011
+:1076E000D10F00006F220402F130D10F6F2304028A
+:1076F000F230D10FC020D10F6C1002220A20230AD1
+:10770000006D280E28374028374428374828374C42
+:10771000233D01030200D10F6C100202E431D10FAE
+:107720000A004368656C73696F20465720444542E0
+:1077300055473D3020284275696C74204672692097
+:107740004D61792020382031363A30373A333620AF
+:107750005044542032303039206F6E20636C656F96
+:1077600070617472612E6173696364657369676EB9
+:107770006572732E636F6D3A2F686F6D652F666546
+:107780006C69782F772F66775F372E31292C20563A
+:10779000657273696F6E2054337878203030372EDD
+:1077A00030342E3030202D203130303730343030EE
+:0877B000100704000071489469
+:00000001FF
diff --git a/fs/Kconfig b/fs/Kconfig
index 525da2e8f73..4044f163035 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -39,6 +39,13 @@ config FS_POSIX_ACL
 	bool
 	default n
 
+source "fs/xfs/Kconfig"
+source "fs/gfs2/Kconfig"
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
+
+endif # BLOCK
+
 config FILE_LOCKING
 	bool "Enable POSIX file locking API" if EMBEDDED
 	default y
@@ -47,13 +54,6 @@ config FILE_LOCKING
           for filesystems like NFS and for the flock() system
           call. Disabling this option saves about 11k.
 
-source "fs/xfs/Kconfig"
-source "fs/gfs2/Kconfig"
-source "fs/ocfs2/Kconfig"
-source "fs/btrfs/Kconfig"
-
-endif # BLOCK
-
 source "fs/notify/Kconfig"
 
 source "fs/quota/Kconfig"
diff --git a/fs/afs/misc.c b/fs/afs/misc.c
index 2d33a5f7d21..0dd4dafee10 100644
--- a/fs/afs/misc.c
+++ b/fs/afs/misc.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <rxrpc/packet.h>
 #include "internal.h"
 #include "afs_fs.h"
 
@@ -54,6 +55,21 @@ int afs_abort_to_error(u32 abort_code)
 	case 0x2f6df24:		return -ENOLCK;
 	case 0x2f6df26:		return -ENOTEMPTY;
 	case 0x2f6df78:		return -EDQUOT;
+
+	case RXKADINCONSISTENCY: return -EPROTO;
+	case RXKADPACKETSHORT:	return -EPROTO;
+	case RXKADLEVELFAIL:	return -EKEYREJECTED;
+	case RXKADTICKETLEN:	return -EKEYREJECTED;
+	case RXKADOUTOFSEQUENCE: return -EPROTO;
+	case RXKADNOAUTH:	return -EKEYREJECTED;
+	case RXKADBADKEY:	return -EKEYREJECTED;
+	case RXKADBADTICKET:	return -EKEYREJECTED;
+	case RXKADUNKNOWNKEY:	return -EKEYREJECTED;
+	case RXKADEXPIRED:	return -EKEYEXPIRED;
+	case RXKADSEALEDINCON:	return -EKEYREJECTED;
+	case RXKADDATALEN:	return -EKEYREJECTED;
+	case RXKADILLEGALLEVEL:	return -EKEYREJECTED;
+
 	default:		return -EREMOTEIO;
 	}
 }
diff --git a/fs/afs/vlocation.c b/fs/afs/vlocation.c
index ec2a7431e45..6e689208def 100644
--- a/fs/afs/vlocation.c
+++ b/fs/afs/vlocation.c
@@ -65,6 +65,8 @@ static int afs_vlocation_access_vl_by_name(struct afs_vlocation *vl,
 				goto out;
 			goto rotate;
 		case -ENOMEDIUM:
+		case -EKEYREJECTED:
+		case -EKEYEXPIRED:
 			goto out;
 		default:
 			ret = -EIO;
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 9367b6297d8..89cd2deeb4a 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -513,7 +513,7 @@ befs_utf2nls(struct super_block *sb, const char *in,
 {
 	struct nls_table *nls = BEFS_SB(sb)->nls;
 	int i, o;
-	wchar_t uni;
+	unicode_t uni;
 	int unilen, utflen;
 	char *result;
 	/* The utf8->nls conversion won't make the final nls string bigger
@@ -539,16 +539,16 @@ befs_utf2nls(struct super_block *sb, const char *in,
 	for (i = o = 0; i < in_len; i += utflen, o += unilen) {
 
 		/* convert from UTF-8 to Unicode */
-		utflen = utf8_mbtowc(&uni, &in[i], in_len - i);
-		if (utflen < 0) {
+		utflen = utf8_to_utf32(&in[i], in_len - i, &uni);
+		if (utflen < 0)
 			goto conv_err;
-		}
 
 		/* convert from Unicode to nls */
+		if (uni > MAX_WCHAR_T)
+			goto conv_err;
 		unilen = nls->uni2char(uni, &result[o], in_len - o);
-		if (unilen < 0) {
+		if (unilen < 0)
 			goto conv_err;
-		}
 	}
 	result[o] = '\0';
 	*out_len = o;
@@ -619,15 +619,13 @@ befs_nls2utf(struct super_block *sb, const char *in,
 
 		/* convert from nls to unicode */
 		unilen = nls->char2uni(&in[i], in_len - i, &uni);
-		if (unilen < 0) {
+		if (unilen < 0)
 			goto conv_err;
-		}
 
 		/* convert from unicode to UTF-8 */
-		utflen = utf8_wctomb(&result[o], uni, 3);
-		if (utflen <= 0) {
+		utflen = utf32_to_utf8(uni, &result[o], 3);
+		if (utflen <= 0)
 			goto conv_err;
-		}
 	}
 
 	result[o] = '\0';
diff --git a/fs/bio.c b/fs/bio.c
index 59000215e59..24c91404353 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/mempool.h>
 #include <linux/workqueue.h>
-#include <linux/blktrace_api.h>
 #include <scsi/sg.h>		/* for struct sg_iovec */
 
 #include <trace/events/block.h>
@@ -358,9 +357,9 @@ static void bio_kmalloc_destructor(struct bio *bio)
  *
  *   If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
  *   a bio. This is due to the mempool guarantees. To make this work, callers
- *   must never allocate more than 1 bio at the time from this pool. Callers
+ *   must never allocate more than 1 bio at a time from this pool. Callers
  *   that need to allocate more than 1 bio must always submit the previously
- *   allocate bio for IO before attempting to allocate a new one. Failure to
+ *   allocated bio for IO before attempting to allocate a new one. Failure to
  *   do so can cause livelocks under memory pressure.
  *
  **/
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 0d50d49d990..d28d29c95f7 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -42,6 +42,8 @@
 static struct extent_io_ops btree_extent_io_ops;
 static void end_workqueue_fn(struct btrfs_work *work);
 
+static atomic_t btrfs_bdi_num = ATOMIC_INIT(0);
+
 /*
  * end_io_wq structs are used to do processing in task context when an IO is
  * complete.  This is used during reads to verify checksums, and it is used
@@ -1342,12 +1344,25 @@ static void btrfs_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
 	free_extent_map(em);
 }
 
+/*
+ * If this fails, caller must call bdi_destroy() to get rid of the
+ * bdi again.
+ */
 static int setup_bdi(struct btrfs_fs_info *info, struct backing_dev_info *bdi)
 {
-	bdi_init(bdi);
+	int err;
+
+	bdi->capabilities = BDI_CAP_MAP_COPY;
+	err = bdi_init(bdi);
+	if (err)
+		return err;
+
+	err = bdi_register(bdi, NULL, "btrfs-%d",
+				atomic_inc_return(&btrfs_bdi_num));
+	if (err)
+		return err;
+
 	bdi->ra_pages	= default_backing_dev_info.ra_pages;
-	bdi->state		= 0;
-	bdi->capabilities	= default_backing_dev_info.capabilities;
 	bdi->unplug_io_fn	= btrfs_unplug_io_fn;
 	bdi->unplug_io_data	= info;
 	bdi->congested_fn	= btrfs_congested_fn;
@@ -1569,7 +1584,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	fs_info->sb = sb;
 	fs_info->max_extent = (u64)-1;
 	fs_info->max_inline = 8192 * 1024;
-	setup_bdi(fs_info, &fs_info->bdi);
+	if (setup_bdi(fs_info, &fs_info->bdi))
+		goto fail_bdi;
 	fs_info->btree_inode = new_inode(sb);
 	fs_info->btree_inode->i_ino = 1;
 	fs_info->btree_inode->i_nlink = 1;
@@ -1946,8 +1962,8 @@ fail_iput:
 
 	btrfs_close_devices(fs_info->fs_devices);
 	btrfs_mapping_tree_free(&fs_info->mapping_tree);
+fail_bdi:
 	bdi_destroy(&fs_info->bdi);
-
 fail:
 	kfree(extent_root);
 	kfree(tree_root);
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 2e177d7f4bb..4e83457ea25 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -543,13 +543,13 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans,
 			btrfs_free_log(trans, root);
 			btrfs_update_reloc_root(trans, root);
 
-			if (root->commit_root == root->node)
-				continue;
-
-			free_extent_buffer(root->commit_root);
-			root->commit_root = btrfs_root_node(root);
+			if (root->commit_root != root->node) {
+				free_extent_buffer(root->commit_root);
+				root->commit_root = btrfs_root_node(root);
+				btrfs_set_root_node(&root->root_item,
+						    root->node);
+			}
 
-			btrfs_set_root_node(&root->root_item, root->node);
 			err = btrfs_update_root(trans, fs_info->tree_root,
 						&root->root_key,
 						&root->root_item);
diff --git a/fs/compat.c b/fs/compat.c
index 6aefb776dfe..cdd51a3a7c5 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -471,7 +471,7 @@ asmlinkage long compat_sys_fcntl64(unsigned int fd, unsigned int cmd,
 		ret = sys_fcntl(fd, cmd, (unsigned long)&f);
 		set_fs(old_fs);
 		if (cmd == F_GETLK && ret == 0) {
-			/* GETLK was successfule and we need to return the data...
+			/* GETLK was successful and we need to return the data...
 			 * but it needs to fit in the compat structure.
 			 * l_start shouldn't be too big, unless the original
 			 * start + end is greater than COMPAT_OFF_T_MAX, in which
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index b83f6bcfa51..0aac371bff0 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1765,7 +1765,7 @@ static int do_i2c_smbus_ioctl(unsigned int fd, unsigned int cmd, unsigned long a
 
 /* Since old style bridge ioctl's endup using SIOCDEVPRIVATE
  * for some operations; this forces use of the newer bridge-utils that
- * use compatiable ioctls
+ * use compatible ioctls
  */
 static int old_bridge_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
 {
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 33a90120f6a..4d74fc72c19 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -67,6 +67,8 @@ static int debugfs_u8_get(void *data, u64 *val)
 	return 0;
 }
 DEFINE_SIMPLE_ATTRIBUTE(fops_u8, debugfs_u8_get, debugfs_u8_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u8_ro, debugfs_u8_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u8_wo, NULL, debugfs_u8_set, "%llu\n");
 
 /**
  * debugfs_create_u8 - create a debugfs file that is used to read and write an unsigned 8-bit value
@@ -95,6 +97,13 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_u8, debugfs_u8_get, debugfs_u8_set, "%llu\n");
 struct dentry *debugfs_create_u8(const char *name, mode_t mode,
 				 struct dentry *parent, u8 *value)
 {
+	/* if there are no write bits set, make read only */
+	if (!(mode & S_IWUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_u8_ro);
+	/* if there are no read bits set, make write only */
+	if (!(mode & S_IRUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_u8_wo);
+
 	return debugfs_create_file(name, mode, parent, value, &fops_u8);
 }
 EXPORT_SYMBOL_GPL(debugfs_create_u8);
@@ -110,6 +119,8 @@ static int debugfs_u16_get(void *data, u64 *val)
 	return 0;
 }
 DEFINE_SIMPLE_ATTRIBUTE(fops_u16, debugfs_u16_get, debugfs_u16_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u16_ro, debugfs_u16_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u16_wo, NULL, debugfs_u16_set, "%llu\n");
 
 /**
  * debugfs_create_u16 - create a debugfs file that is used to read and write an unsigned 16-bit value
@@ -138,6 +149,13 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_u16, debugfs_u16_get, debugfs_u16_set, "%llu\n");
 struct dentry *debugfs_create_u16(const char *name, mode_t mode,
 				  struct dentry *parent, u16 *value)
 {
+	/* if there are no write bits set, make read only */
+	if (!(mode & S_IWUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_u16_ro);
+	/* if there are no read bits set, make write only */
+	if (!(mode & S_IRUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_u16_wo);
+
 	return debugfs_create_file(name, mode, parent, value, &fops_u16);
 }
 EXPORT_SYMBOL_GPL(debugfs_create_u16);
@@ -153,6 +171,8 @@ static int debugfs_u32_get(void *data, u64 *val)
 	return 0;
 }
 DEFINE_SIMPLE_ATTRIBUTE(fops_u32, debugfs_u32_get, debugfs_u32_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u32_ro, debugfs_u32_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u32_wo, NULL, debugfs_u32_set, "%llu\n");
 
 /**
  * debugfs_create_u32 - create a debugfs file that is used to read and write an unsigned 32-bit value
@@ -181,6 +201,13 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_u32, debugfs_u32_get, debugfs_u32_set, "%llu\n");
 struct dentry *debugfs_create_u32(const char *name, mode_t mode,
 				 struct dentry *parent, u32 *value)
 {
+	/* if there are no write bits set, make read only */
+	if (!(mode & S_IWUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_u32_ro);
+	/* if there are no read bits set, make write only */
+	if (!(mode & S_IRUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_u32_wo);
+
 	return debugfs_create_file(name, mode, parent, value, &fops_u32);
 }
 EXPORT_SYMBOL_GPL(debugfs_create_u32);
@@ -197,6 +224,8 @@ static int debugfs_u64_get(void *data, u64 *val)
 	return 0;
 }
 DEFINE_SIMPLE_ATTRIBUTE(fops_u64, debugfs_u64_get, debugfs_u64_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_ro, debugfs_u64_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
 
 /**
  * debugfs_create_u64 - create a debugfs file that is used to read and write an unsigned 64-bit value
@@ -225,15 +254,28 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_u64, debugfs_u64_get, debugfs_u64_set, "%llu\n");
 struct dentry *debugfs_create_u64(const char *name, mode_t mode,
 				 struct dentry *parent, u64 *value)
 {
+	/* if there are no write bits set, make read only */
+	if (!(mode & S_IWUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_u64_ro);
+	/* if there are no read bits set, make write only */
+	if (!(mode & S_IRUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_u64_wo);
+
 	return debugfs_create_file(name, mode, parent, value, &fops_u64);
 }
 EXPORT_SYMBOL_GPL(debugfs_create_u64);
 
 DEFINE_SIMPLE_ATTRIBUTE(fops_x8, debugfs_u8_get, debugfs_u8_set, "0x%02llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x8_ro, debugfs_u8_get, NULL, "0x%02llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x8_wo, NULL, debugfs_u8_set, "0x%02llx\n");
 
 DEFINE_SIMPLE_ATTRIBUTE(fops_x16, debugfs_u16_get, debugfs_u16_set, "0x%04llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x16_ro, debugfs_u16_get, NULL, "0x%04llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x16_wo, NULL, debugfs_u16_set, "0x%04llx\n");
 
 DEFINE_SIMPLE_ATTRIBUTE(fops_x32, debugfs_u32_get, debugfs_u32_set, "0x%08llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x32_ro, debugfs_u32_get, NULL, "0x%08llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(fops_x32_wo, NULL, debugfs_u32_set, "0x%08llx\n");
 
 /*
  * debugfs_create_x{8,16,32} - create a debugfs file that is used to read and write an unsigned {8,16,32}-bit value
@@ -256,6 +298,13 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_x32, debugfs_u32_get, debugfs_u32_set, "0x%08llx\n"
 struct dentry *debugfs_create_x8(const char *name, mode_t mode,
 				 struct dentry *parent, u8 *value)
 {
+	/* if there are no write bits set, make read only */
+	if (!(mode & S_IWUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_x8_ro);
+	/* if there are no read bits set, make write only */
+	if (!(mode & S_IRUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_x8_wo);
+
 	return debugfs_create_file(name, mode, parent, value, &fops_x8);
 }
 EXPORT_SYMBOL_GPL(debugfs_create_x8);
@@ -273,6 +322,13 @@ EXPORT_SYMBOL_GPL(debugfs_create_x8);
 struct dentry *debugfs_create_x16(const char *name, mode_t mode,
 				 struct dentry *parent, u16 *value)
 {
+	/* if there are no write bits set, make read only */
+	if (!(mode & S_IWUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_x16_ro);
+	/* if there are no read bits set, make write only */
+	if (!(mode & S_IRUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_x16_wo);
+
 	return debugfs_create_file(name, mode, parent, value, &fops_x16);
 }
 EXPORT_SYMBOL_GPL(debugfs_create_x16);
@@ -290,6 +346,13 @@ EXPORT_SYMBOL_GPL(debugfs_create_x16);
 struct dentry *debugfs_create_x32(const char *name, mode_t mode,
 				 struct dentry *parent, u32 *value)
 {
+	/* if there are no write bits set, make read only */
+	if (!(mode & S_IWUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_x32_ro);
+	/* if there are no read bits set, make write only */
+	if (!(mode & S_IRUGO))
+		return debugfs_create_file(name, mode, parent, value, &fops_x32_wo);
+
 	return debugfs_create_file(name, mode, parent, value, &fops_x32);
 }
 EXPORT_SYMBOL_GPL(debugfs_create_x32);
@@ -419,7 +482,7 @@ static const struct file_operations fops_blob = {
 };
 
 /**
- * debugfs_create_blob - create a debugfs file that is used to read and write a binary blob
+ * debugfs_create_blob - create a debugfs file that is used to read a binary blob
  * @name: a pointer to a string containing the name of the file to create.
  * @mode: the permission that the file should have
  * @parent: a pointer to the parent dentry for this file.  This should be a
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 0662ba6de85..d22438ef767 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -403,6 +403,7 @@ void debugfs_remove_recursive(struct dentry *dentry)
 		}
 		child = list_entry(parent->d_subdirs.next, struct dentry,
 				d_u.d_child);
+ next_sibling:
 
 		/*
 		 * If "child" isn't empty, walk down the tree and
@@ -417,6 +418,16 @@ void debugfs_remove_recursive(struct dentry *dentry)
 		__debugfs_remove(child, parent);
 		if (parent->d_subdirs.next == &child->d_u.d_child) {
 			/*
+			 * Try the next sibling.
+			 */
+			if (child->d_u.d_child.next != &parent->d_subdirs) {
+				child = list_entry(child->d_u.d_child.next,
+						   struct dentry,
+						   d_u.d_child);
+				goto next_sibling;
+			}
+
+			/*
 			 * Avoid infinite loop if we fail to remove
 			 * one dentry.
 			 */
diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index b6a719a909f..a2edb791344 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -24,7 +24,7 @@ static void drop_pagecache_sb(struct super_block *sb)
 			continue;
 		__iget(inode);
 		spin_unlock(&inode_lock);
-		__invalidate_mapping_pages(inode->i_mapping, 0, -1, true);
+		invalidate_mapping_pages(inode->i_mapping, 0, -1);
 		iput(toput_inode);
 		toput_inode = inode;
 		spin_lock(&inode_lock);
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index b2bbf45039e..f2e5811936d 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -27,7 +27,7 @@ struct ext2_inode_info {
 	/*
 	 * i_block_group is the number of the block group which contains
 	 * this file's inode.  Constant across the lifetime of the inode,
-	 * it is ued for making block allocation decisions - we try to
+	 * it is used for making block allocation decisions - we try to
 	 * place a file's data blocks near its inode block, and new inodes
 	 * near to their parent directory's inode.
 	 */
diff --git a/fs/fat/cache.c b/fs/fat/cache.c
index b4260229808..923990e4f16 100644
--- a/fs/fat/cache.c
+++ b/fs/fat/cache.c
@@ -241,7 +241,7 @@ int fat_get_cluster(struct inode *inode, int cluster, int *fclus, int *dclus)
 	while (*fclus < cluster) {
 		/* prevent the infinite loop of cluster chain */
 		if (*fclus > limit) {
-			fat_fs_panic(sb, "%s: detected the cluster chain loop"
+			fat_fs_error(sb, "%s: detected the cluster chain loop"
 				     " (i_pos %lld)", __func__,
 				     MSDOS_I(inode)->i_pos);
 			nr = -EIO;
@@ -252,7 +252,7 @@ int fat_get_cluster(struct inode *inode, int cluster, int *fclus, int *dclus)
 		if (nr < 0)
 			goto out;
 		else if (nr == FAT_ENT_FREE) {
-			fat_fs_panic(sb, "%s: invalid cluster chain"
+			fat_fs_error(sb, "%s: invalid cluster chain"
 				     " (i_pos %lld)", __func__,
 				     MSDOS_I(inode)->i_pos);
 			nr = -EIO;
@@ -285,7 +285,7 @@ static int fat_bmap_cluster(struct inode *inode, int cluster)
 	if (ret < 0)
 		return ret;
 	else if (ret == FAT_ENT_EOF) {
-		fat_fs_panic(sb, "%s: request beyond EOF (i_pos %lld)",
+		fat_fs_error(sb, "%s: request beyond EOF (i_pos %lld)",
 			     __func__, MSDOS_I(inode)->i_pos);
 		return -EIO;
 	}
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index f3500294eec..38ff75a0fe2 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -22,6 +22,19 @@
 #include <asm/uaccess.h>
 #include "fat.h"
 
+/*
+ * Maximum buffer size of short name.
+ * [(MSDOS_NAME + '.') * max one char + nul]
+ * For msdos style, ['.' (hidden) + MSDOS_NAME + '.' + nul]
+ */
+#define FAT_MAX_SHORT_SIZE	((MSDOS_NAME + 1) * NLS_MAX_CHARSET_SIZE + 1)
+/*
+ * Maximum buffer size of unicode chars from slots.
+ * [(max longname slots * 13 (size in a slot) + nul) * sizeof(wchar_t)]
+ */
+#define FAT_MAX_UNI_CHARS	((MSDOS_SLOTS - 1) * 13 + 1)
+#define FAT_MAX_UNI_SIZE	(FAT_MAX_UNI_CHARS * sizeof(wchar_t))
+
 static inline loff_t fat_make_i_pos(struct super_block *sb,
 				    struct buffer_head *bh,
 				    struct msdos_dir_entry *de)
@@ -171,7 +184,8 @@ static inline int fat_uni_to_x8(struct msdos_sb_info *sbi, const wchar_t *uni,
 				unsigned char *buf, int size)
 {
 	if (sbi->options.utf8)
-		return utf8_wcstombs(buf, uni, size);
+		return utf16s_to_utf8s(uni, FAT_MAX_UNI_CHARS,
+				UTF16_HOST_ENDIAN, buf, size);
 	else
 		return uni16_to_x8(buf, uni, size, sbi->options.unicode_xlate,
 				   sbi->nls_io);
@@ -325,19 +339,6 @@ parse_long:
 }
 
 /*
- * Maximum buffer size of short name.
- * [(MSDOS_NAME + '.') * max one char + nul]
- * For msdos style, ['.' (hidden) + MSDOS_NAME + '.' + nul]
- */
-#define FAT_MAX_SHORT_SIZE	((MSDOS_NAME + 1) * NLS_MAX_CHARSET_SIZE + 1)
-/*
- * Maximum buffer size of unicode chars from slots.
- * [(max longname slots * 13 (size in a slot) + nul) * sizeof(wchar_t)]
- */
-#define FAT_MAX_UNI_CHARS	((MSDOS_SLOTS - 1) * 13 + 1)
-#define FAT_MAX_UNI_SIZE	(FAT_MAX_UNI_CHARS * sizeof(wchar_t))
-
-/*
  * Return values: negative -> error, 0 -> not found, positive -> found,
  * value is the total amount of slots, including the shortname entry.
  */
@@ -1334,7 +1335,7 @@ found:
 			goto error_remove;
 		}
 		if (dir->i_size & (sbi->cluster_size - 1)) {
-			fat_fs_panic(sb, "Odd directory size");
+			fat_fs_error(sb, "Odd directory size");
 			dir->i_size = (dir->i_size + sbi->cluster_size - 1)
 				& ~((loff_t)sbi->cluster_size - 1);
 		}
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index e4d88527b5d..adb0e72a176 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -17,6 +17,10 @@
 #define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
 #define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
 
+#define FAT_ERRORS_CONT		1      /* ignore error and continue */
+#define FAT_ERRORS_PANIC	2      /* panic on error */
+#define FAT_ERRORS_RO		3      /* remount r/o on error */
+
 struct fat_mount_options {
 	uid_t fs_uid;
 	gid_t fs_gid;
@@ -26,6 +30,7 @@ struct fat_mount_options {
 	char *iocharset;          /* Charset used for filename input/display */
 	unsigned short shortname; /* flags for shortname display/create rule */
 	unsigned char name_check; /* r = relaxed, n = normal, s = strict */
+	unsigned char errors;	  /* On error: continue, panic, remount-ro */
 	unsigned short allow_utime;/* permission for setting the [am]time */
 	unsigned quiet:1,         /* set = fake successful chmods and chowns */
 		 showexec:1,      /* set = only set x bit for com/exe/bat */
@@ -316,7 +321,7 @@ extern int fat_fill_super(struct super_block *sb, void *data, int silent,
 extern int fat_flush_inodes(struct super_block *sb, struct inode *i1,
 		            struct inode *i2);
 /* fat/misc.c */
-extern void fat_fs_panic(struct super_block *s, const char *fmt, ...)
+extern void fat_fs_error(struct super_block *s, const char *fmt, ...)
 	__attribute__ ((format (printf, 2, 3))) __cold;
 extern void fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c
index 618f5305c2e..a81037721a6 100644
--- a/fs/fat/fatent.c
+++ b/fs/fat/fatent.c
@@ -348,7 +348,7 @@ int fat_ent_read(struct inode *inode, struct fat_entry *fatent, int entry)
 
 	if (entry < FAT_START_ENT || sbi->max_cluster <= entry) {
 		fatent_brelse(fatent);
-		fat_fs_panic(sb, "invalid access to FAT (entry 0x%08x)", entry);
+		fat_fs_error(sb, "invalid access to FAT (entry 0x%08x)", entry);
 		return -EIO;
 	}
 
@@ -560,7 +560,7 @@ int fat_free_clusters(struct inode *inode, int cluster)
 			err = cluster;
 			goto error;
 		} else if (cluster == FAT_ENT_FREE) {
-			fat_fs_panic(sb, "%s: deleting FAT entry beyond EOF",
+			fat_fs_error(sb, "%s: deleting FAT entry beyond EOF",
 				     __func__);
 			err = -EIO;
 			goto error;
diff --git a/fs/fat/file.c b/fs/fat/file.c
index e955a56b4e5..b28ea646ff6 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -18,106 +18,112 @@
 #include <linux/security.h>
 #include "fat.h"
 
-int fat_generic_ioctl(struct inode *inode, struct file *filp,
-		      unsigned int cmd, unsigned long arg)
+static int fat_ioctl_get_attributes(struct inode *inode, u32 __user *user_attr)
 {
+	u32 attr;
+
+	mutex_lock(&inode->i_mutex);
+	attr = fat_make_attrs(inode);
+	mutex_unlock(&inode->i_mutex);
+
+	return put_user(attr, user_attr);
+}
+
+static int fat_ioctl_set_attributes(struct file *file, u32 __user *user_attr)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
 	struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
-	u32 __user *user_attr = (u32 __user *)arg;
+	int is_dir = S_ISDIR(inode->i_mode);
+	u32 attr, oldattr;
+	struct iattr ia;
+	int err;
 
-	switch (cmd) {
-	case FAT_IOCTL_GET_ATTRIBUTES:
-	{
-		u32 attr;
+	err = get_user(attr, user_attr);
+	if (err)
+		goto out;
 
-		mutex_lock(&inode->i_mutex);
-		attr = fat_make_attrs(inode);
-		mutex_unlock(&inode->i_mutex);
+	mutex_lock(&inode->i_mutex);
+	err = mnt_want_write(file->f_path.mnt);
+	if (err)
+		goto out_unlock_inode;
 
-		return put_user(attr, user_attr);
+	/*
+	 * ATTR_VOLUME and ATTR_DIR cannot be changed; this also
+	 * prevents the user from turning us into a VFAT
+	 * longname entry.  Also, we obviously can't set
+	 * any of the NTFS attributes in the high 24 bits.
+	 */
+	attr &= 0xff & ~(ATTR_VOLUME | ATTR_DIR);
+	/* Merge in ATTR_VOLUME and ATTR_DIR */
+	attr |= (MSDOS_I(inode)->i_attrs & ATTR_VOLUME) |
+		(is_dir ? ATTR_DIR : 0);
+	oldattr = fat_make_attrs(inode);
+
+	/* Equivalent to a chmod() */
+	ia.ia_valid = ATTR_MODE | ATTR_CTIME;
+	ia.ia_ctime = current_fs_time(inode->i_sb);
+	if (is_dir)
+		ia.ia_mode = fat_make_mode(sbi, attr, S_IRWXUGO);
+	else {
+		ia.ia_mode = fat_make_mode(sbi, attr,
+			S_IRUGO | S_IWUGO | (inode->i_mode & S_IXUGO));
 	}
-	case FAT_IOCTL_SET_ATTRIBUTES:
-	{
-		u32 attr, oldattr;
-		int err, is_dir = S_ISDIR(inode->i_mode);
-		struct iattr ia;
 
-		err = get_user(attr, user_attr);
-		if (err)
-			return err;
+	/* The root directory has no attributes */
+	if (inode->i_ino == MSDOS_ROOT_INO && attr != ATTR_DIR) {
+		err = -EINVAL;
+		goto out_drop_write;
+	}
 
-		mutex_lock(&inode->i_mutex);
-
-		err = mnt_want_write(filp->f_path.mnt);
-		if (err)
-			goto up_no_drop_write;
-
-		/*
-		 * ATTR_VOLUME and ATTR_DIR cannot be changed; this also
-		 * prevents the user from turning us into a VFAT
-		 * longname entry.  Also, we obviously can't set
-		 * any of the NTFS attributes in the high 24 bits.
-		 */
-		attr &= 0xff & ~(ATTR_VOLUME | ATTR_DIR);
-		/* Merge in ATTR_VOLUME and ATTR_DIR */
-		attr |= (MSDOS_I(inode)->i_attrs & ATTR_VOLUME) |
-			(is_dir ? ATTR_DIR : 0);
-		oldattr = fat_make_attrs(inode);
-
-		/* Equivalent to a chmod() */
-		ia.ia_valid = ATTR_MODE | ATTR_CTIME;
-		ia.ia_ctime = current_fs_time(inode->i_sb);
-		if (is_dir)
-			ia.ia_mode = fat_make_mode(sbi, attr, S_IRWXUGO);
-		else {
-			ia.ia_mode = fat_make_mode(sbi, attr,
-				S_IRUGO | S_IWUGO | (inode->i_mode & S_IXUGO));
-		}
+	if (sbi->options.sys_immutable &&
+	    ((attr | oldattr) & ATTR_SYS) &&
+	    !capable(CAP_LINUX_IMMUTABLE)) {
+		err = -EPERM;
+		goto out_drop_write;
+	}
 
-		/* The root directory has no attributes */
-		if (inode->i_ino == MSDOS_ROOT_INO && attr != ATTR_DIR) {
-			err = -EINVAL;
-			goto up;
-		}
+	/*
+	 * The security check is questionable...  We single
+	 * out the RO attribute for checking by the security
+	 * module, just because it maps to a file mode.
+	 */
+	err = security_inode_setattr(file->f_path.dentry, &ia);
+	if (err)
+		goto out_drop_write;
 
-		if (sbi->options.sys_immutable) {
-			if ((attr | oldattr) & ATTR_SYS) {
-				if (!capable(CAP_LINUX_IMMUTABLE)) {
-					err = -EPERM;
-					goto up;
-				}
-			}
-		}
+	/* This MUST be done before doing anything irreversible... */
+	err = fat_setattr(file->f_path.dentry, &ia);
+	if (err)
+		goto out_drop_write;
+
+	fsnotify_change(file->f_path.dentry, ia.ia_valid);
+	if (sbi->options.sys_immutable) {
+		if (attr & ATTR_SYS)
+			inode->i_flags |= S_IMMUTABLE;
+		else
+			inode->i_flags &= S_IMMUTABLE;
+	}
 
-		/*
-		 * The security check is questionable...  We single
-		 * out the RO attribute for checking by the security
-		 * module, just because it maps to a file mode.
-		 */
-		err = security_inode_setattr(filp->f_path.dentry, &ia);
-		if (err)
-			goto up;
-
-		/* This MUST be done before doing anything irreversible... */
-		err = fat_setattr(filp->f_path.dentry, &ia);
-		if (err)
-			goto up;
-
-		fsnotify_change(filp->f_path.dentry, ia.ia_valid);
-		if (sbi->options.sys_immutable) {
-			if (attr & ATTR_SYS)
-				inode->i_flags |= S_IMMUTABLE;
-			else
-				inode->i_flags &= S_IMMUTABLE;
-		}
+	fat_save_attrs(inode, attr);
+	mark_inode_dirty(inode);
+out_drop_write:
+	mnt_drop_write(file->f_path.mnt);
+out_unlock_inode:
+	mutex_unlock(&inode->i_mutex);
+out:
+	return err;
+}
 
-		fat_save_attrs(inode, attr);
-		mark_inode_dirty(inode);
-up:
-		mnt_drop_write(filp->f_path.mnt);
-up_no_drop_write:
-		mutex_unlock(&inode->i_mutex);
-		return err;
-	}
+int fat_generic_ioctl(struct inode *inode, struct file *filp,
+		      unsigned int cmd, unsigned long arg)
+{
+	u32 __user *user_attr = (u32 __user *)arg;
+
+	switch (cmd) {
+	case FAT_IOCTL_GET_ATTRIBUTES:
+		return fat_ioctl_get_attributes(inode, user_attr);
+	case FAT_IOCTL_SET_ATTRIBUTES:
+		return fat_ioctl_set_attributes(filp, user_attr);
 	default:
 		return -ENOTTY;	/* Inappropriate ioctl for device */
 	}
@@ -225,7 +231,7 @@ static int fat_free(struct inode *inode, int skip)
 			fatent_brelse(&fatent);
 			return 0;
 		} else if (ret == FAT_ENT_FREE) {
-			fat_fs_panic(sb,
+			fat_fs_error(sb,
 				     "%s: invalid cluster chain (i_pos %lld)",
 				     __func__, MSDOS_I(inode)->i_pos);
 			ret = -EIO;
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 51a5ecf9000..304b411cb8b 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -76,7 +76,7 @@ static inline int __fat_get_block(struct inode *inode, sector_t iblock,
 		return 0;
 
 	if (iblock != MSDOS_I(inode)->mmu_private >> sb->s_blocksize_bits) {
-		fat_fs_panic(sb, "corrupted file size (i_pos %lld, %lld)",
+		fat_fs_error(sb, "corrupted file size (i_pos %lld, %lld)",
 			MSDOS_I(inode)->i_pos, MSDOS_I(inode)->mmu_private);
 		return -EIO;
 	}
@@ -856,6 +856,12 @@ static int fat_show_options(struct seq_file *m, struct vfsmount *mnt)
 		seq_puts(m, ",flush");
 	if (opts->tz_utc)
 		seq_puts(m, ",tz=UTC");
+	if (opts->errors == FAT_ERRORS_CONT)
+		seq_puts(m, ",errors=continue");
+	else if (opts->errors == FAT_ERRORS_PANIC)
+		seq_puts(m, ",errors=panic");
+	else
+		seq_puts(m, ",errors=remount-ro");
 
 	return 0;
 }
@@ -868,7 +874,8 @@ enum {
 	Opt_charset, Opt_shortname_lower, Opt_shortname_win95,
 	Opt_shortname_winnt, Opt_shortname_mixed, Opt_utf8_no, Opt_utf8_yes,
 	Opt_uni_xl_no, Opt_uni_xl_yes, Opt_nonumtail_no, Opt_nonumtail_yes,
-	Opt_obsolate, Opt_flush, Opt_tz_utc, Opt_rodir, Opt_err,
+	Opt_obsolate, Opt_flush, Opt_tz_utc, Opt_rodir, Opt_err_cont,
+	Opt_err_panic, Opt_err_ro, Opt_err,
 };
 
 static const match_table_t fat_tokens = {
@@ -891,6 +898,11 @@ static const match_table_t fat_tokens = {
 	{Opt_showexec, "showexec"},
 	{Opt_debug, "debug"},
 	{Opt_immutable, "sys_immutable"},
+	{Opt_flush, "flush"},
+	{Opt_tz_utc, "tz=UTC"},
+	{Opt_err_cont, "errors=continue"},
+	{Opt_err_panic, "errors=panic"},
+	{Opt_err_ro, "errors=remount-ro"},
 	{Opt_obsolate, "conv=binary"},
 	{Opt_obsolate, "conv=text"},
 	{Opt_obsolate, "conv=auto"},
@@ -902,8 +914,6 @@ static const match_table_t fat_tokens = {
 	{Opt_obsolate, "cvf_format=%20s"},
 	{Opt_obsolate, "cvf_options=%100s"},
 	{Opt_obsolate, "posix"},
-	{Opt_flush, "flush"},
-	{Opt_tz_utc, "tz=UTC"},
 	{Opt_err, NULL},
 };
 static const match_table_t msdos_tokens = {
@@ -973,6 +983,7 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 	opts->numtail = 1;
 	opts->usefree = opts->nocase = 0;
 	opts->tz_utc = 0;
+	opts->errors = FAT_ERRORS_RO;
 	*debug = 0;
 
 	if (!options)
@@ -1065,6 +1076,15 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 		case Opt_tz_utc:
 			opts->tz_utc = 1;
 			break;
+		case Opt_err_cont:
+			opts->errors = FAT_ERRORS_CONT;
+			break;
+		case Opt_err_panic:
+			opts->errors = FAT_ERRORS_PANIC;
+			break;
+		case Opt_err_ro:
+			opts->errors = FAT_ERRORS_RO;
+			break;
 
 		/* msdos specific */
 		case Opt_dots:
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index ac39ebcc149..a6c20473dfd 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -12,14 +12,19 @@
 #include "fat.h"
 
 /*
- * fat_fs_panic reports a severe file system problem and sets the file system
- * read-only. The file system can be made writable again by remounting it.
+ * fat_fs_error reports a file system problem that might indicate fa data
+ * corruption/inconsistency. Depending on 'errors' mount option the
+ * panic() is called, or error message is printed FAT and nothing is done,
+ * or filesystem is remounted read-only (default behavior).
+ * In case the file system is remounted read-only, it can be made writable
+ * again by remounting it.
  */
-void fat_fs_panic(struct super_block *s, const char *fmt, ...)
+void fat_fs_error(struct super_block *s, const char *fmt, ...)
 {
+	struct fat_mount_options *opts = &MSDOS_SB(s)->options;
 	va_list args;
 
-	printk(KERN_ERR "FAT: Filesystem panic (dev %s)\n", s->s_id);
+	printk(KERN_ERR "FAT: Filesystem error (dev %s)\n", s->s_id);
 
 	printk(KERN_ERR "    ");
 	va_start(args, fmt);
@@ -27,13 +32,14 @@ void fat_fs_panic(struct super_block *s, const char *fmt, ...)
 	va_end(args);
 	printk("\n");
 
-	if (!(s->s_flags & MS_RDONLY)) {
+	if (opts->errors == FAT_ERRORS_PANIC)
+		panic("    FAT fs panic from previous error\n");
+	else if (opts->errors == FAT_ERRORS_RO && !(s->s_flags & MS_RDONLY)) {
 		s->s_flags |= MS_RDONLY;
 		printk(KERN_ERR "    File system has been set read-only\n");
 	}
 }
-
-EXPORT_SYMBOL_GPL(fat_fs_panic);
+EXPORT_SYMBOL_GPL(fat_fs_error);
 
 /* Flushes the number of free clusters on FAT32 */
 /* XXX: Need to write one per FSINFO block.  Currently only writes 1 */
@@ -124,7 +130,7 @@ int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster)
 			mark_inode_dirty(inode);
 	}
 	if (new_fclus != (inode->i_blocks >> (sbi->cluster_bits - 9))) {
-		fat_fs_panic(sb, "clusters badly computed (%d != %llu)",
+		fat_fs_error(sb, "clusters badly computed (%d != %llu)",
 			     new_fclus,
 			     (llu)(inode->i_blocks >> (sbi->cluster_bits - 9)));
 		fat_cache_inval_inode(inode);
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index 20f52286135..82f88733b68 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -608,7 +608,7 @@ error_inode:
 		sinfo.bh = NULL;
 	}
 	if (corrupt < 0) {
-		fat_fs_panic(new_dir->i_sb,
+		fat_fs_error(new_dir->i_sb,
 			     "%s: Filesystem corrupted (i_pos %lld)",
 			     __func__, sinfo.i_pos);
 	}
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index b50ecbe97f8..73471b7ecc8 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -502,11 +502,11 @@ xlate_to_uni(const unsigned char *name, int len, unsigned char *outname,
 	if (utf8) {
 		int name_len = strlen(name);
 
-		*outlen = utf8_mbstowcs((wchar_t *)outname, name, PATH_MAX);
+		*outlen = utf8s_to_utf16s(name, PATH_MAX, (wchar_t *) outname);
 
 		/*
 		 * We stripped '.'s before and set len appropriately,
-		 * but utf8_mbstowcs doesn't care about len
+		 * but utf8s_to_utf16s doesn't care about len
 		 */
 		*outlen -= (name_len - len);
 
@@ -1030,7 +1030,7 @@ error_inode:
 		sinfo.bh = NULL;
 	}
 	if (corrupt < 0) {
-		fat_fs_panic(new_dir->i_sb,
+		fat_fs_error(new_dir->i_sb,
 			     "%s: Filesystem corrupted (i_pos %lld)",
 			     __func__, sinfo.i_pos);
 	}
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 1ad703150de..a040b764f8e 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -198,15 +198,19 @@ static int setfl(int fd, struct file * filp, unsigned long arg)
 }
 
 static void f_modown(struct file *filp, struct pid *pid, enum pid_type type,
-                     uid_t uid, uid_t euid, int force)
+                     int force)
 {
 	write_lock_irq(&filp->f_owner.lock);
 	if (force || !filp->f_owner.pid) {
 		put_pid(filp->f_owner.pid);
 		filp->f_owner.pid = get_pid(pid);
 		filp->f_owner.pid_type = type;
-		filp->f_owner.uid = uid;
-		filp->f_owner.euid = euid;
+
+		if (pid) {
+			const struct cred *cred = current_cred();
+			filp->f_owner.uid = cred->uid;
+			filp->f_owner.euid = cred->euid;
+		}
 	}
 	write_unlock_irq(&filp->f_owner.lock);
 }
@@ -214,14 +218,13 @@ static void f_modown(struct file *filp, struct pid *pid, enum pid_type type,
 int __f_setown(struct file *filp, struct pid *pid, enum pid_type type,
 		int force)
 {
-	const struct cred *cred = current_cred();
 	int err;
-	
+
 	err = security_file_set_fowner(filp);
 	if (err)
 		return err;
 
-	f_modown(filp, pid, type, cred->uid, cred->euid, force);
+	f_modown(filp, pid, type, force);
 	return 0;
 }
 EXPORT_SYMBOL(__f_setown);
@@ -247,7 +250,7 @@ EXPORT_SYMBOL(f_setown);
 
 void f_delown(struct file *filp)
 {
-	f_modown(filp, NULL, PIDTYPE_PID, 0, 0, 1);
+	f_modown(filp, NULL, PIDTYPE_PID, 1);
 }
 
 pid_t f_getown(struct file *filp)
@@ -425,14 +428,20 @@ static inline int sigio_perm(struct task_struct *p,
 }
 
 static void send_sigio_to_task(struct task_struct *p,
-			       struct fown_struct *fown, 
+			       struct fown_struct *fown,
 			       int fd,
 			       int reason)
 {
-	if (!sigio_perm(p, fown, fown->signum))
+	/*
+	 * F_SETSIG can change ->signum lockless in parallel, make
+	 * sure we read it once and use the same value throughout.
+	 */
+	int signum = ACCESS_ONCE(fown->signum);
+
+	if (!sigio_perm(p, fown, signum))
 		return;
 
-	switch (fown->signum) {
+	switch (signum) {
 		siginfo_t si;
 		default:
 			/* Queue a rt signal with the appropriate fd as its
@@ -441,7 +450,7 @@ static void send_sigio_to_task(struct task_struct *p,
 			   delivered even if we can't queue.  Failure to
 			   queue in this case _should_ be reported; we fall
 			   back to SIGIO in that case. --sct */
-			si.si_signo = fown->signum;
+			si.si_signo = signum;
 			si.si_errno = 0;
 		        si.si_code  = reason;
 			/* Make sure we are called with one of the POLL_*
@@ -453,7 +462,7 @@ static void send_sigio_to_task(struct task_struct *p,
 			else
 				si.si_band = band_table[reason - POLL_IN];
 			si.si_fd    = fd;
-			if (!group_send_sig_info(fown->signum, &si, p))
+			if (!group_send_sig_info(signum, &si, p))
 				break;
 		/* fall-through: fall back on the old plain SIGIO signal */
 		case 0:
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 40308e98c6a..caf049146ca 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -321,7 +321,7 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc)
 
 	spin_lock(&inode_lock);
 	inode->i_state &= ~I_SYNC;
-	if (!(inode->i_state & I_FREEING)) {
+	if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
 		if (!(inode->i_state & I_DIRTY) &&
 		    mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 			/*
@@ -492,7 +492,7 @@ void generic_sync_sb_inodes(struct super_block *sb,
 			break;
 		}
 
-		if (inode->i_state & I_NEW) {
+		if (inode->i_state & (I_NEW | I_WILL_FREE)) {
 			requeue_io(inode);
 			continue;
 		}
@@ -523,7 +523,7 @@ void generic_sync_sb_inodes(struct super_block *sb,
 		if (current_is_pdflush() && !writeback_acquire(bdi))
 			break;
 
-		BUG_ON(inode->i_state & I_FREEING);
+		BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
 		__iget(inode);
 		pages_skipped = wbc->pages_skipped;
 		__writeback_single_inode(inode, wbc);
diff --git a/fs/inode.c b/fs/inode.c
index a88baebf77c..f643be565df 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1408,7 +1408,7 @@ EXPORT_SYMBOL(touch_atime);
  *	for writeback.  Note that this function is meant exclusively for
  *	usage in the file write path of filesystems, and filesystems may
  *	choose to explicitly ignore update via this function with the
- *	S_NOCTIME inode flag, e.g. for network filesystem where these
+ *	S_NOCMTIME inode flag, e.g. for network filesystem where these
  *	timestamps are handled by the server.
  */
 
diff --git a/fs/isofs/joliet.c b/fs/isofs/joliet.c
index 92c14b850e9..a048de81c09 100644
--- a/fs/isofs/joliet.c
+++ b/fs/isofs/joliet.c
@@ -37,37 +37,6 @@ uni16_to_x8(unsigned char *ascii, __be16 *uni, int len, struct nls_table *nls)
 	return (op - ascii);
 }
 
-/* Convert big endian wide character string to utf8 */
-static int
-wcsntombs_be(__u8 *s, const __u8 *pwcs, int inlen, int maxlen)
-{
-	const __u8 *ip;
-	__u8 *op;
-	int size;
-	__u16 c;
-
-	op = s;
-	ip = pwcs;
-	while ((*ip || ip[1]) && (maxlen > 0) && (inlen > 0)) {
-		c = (*ip << 8) | ip[1];
-		if (c > 0x7f) {
-			size = utf8_wctomb(op, c, maxlen);
-			if (size == -1) {
-				/* Ignore character and move on */
-				maxlen--;
-			} else {
-				op += size;
-				maxlen -= size;
-			}
-		} else {
-			*op++ = (__u8) c;
-		}
-		ip += 2;
-		inlen--;
-	}
-	return (op - s);
-}
-
 int
 get_joliet_filename(struct iso_directory_record * de, unsigned char *outname, struct inode * inode)
 {
@@ -79,8 +48,9 @@ get_joliet_filename(struct iso_directory_record * de, unsigned char *outname, st
 	nls = ISOFS_SB(inode->i_sb)->s_nls_iocharset;
 
 	if (utf8) {
-		len = wcsntombs_be(outname, de->name,
-				de->name_len[0] >> 1, PAGE_SIZE);
+		len = utf16s_to_utf8s((const wchar_t *) de->name,
+				de->name_len[0] >> 1, UTF16_BIG_ENDIAN,
+				outname, PAGE_SIZE);
 	} else {
 		len = uni16_to_x8(outname, (__be16 *) de->name,
 				de->name_len[0] >> 1, nls);
diff --git a/fs/jfs/jfs_extent.c b/fs/jfs/jfs_extent.c
index bbbd5f202e3..41d6045dbeb 100644
--- a/fs/jfs/jfs_extent.c
+++ b/fs/jfs/jfs_extent.c
@@ -391,6 +391,7 @@ int extHint(struct inode *ip, s64 offset, xad_t * xp)
 		}
 		XADaddress(xp, xaddr);
 		XADlength(xp, xlen);
+		XADoffset(xp, prev);
 		/*
 		 * only preserve the abnr flag within the xad flags
 		 * of the returned hint.
diff --git a/fs/ncpfs/ncplib_kernel.c b/fs/ncpfs/ncplib_kernel.c
index 97645f11211..0ec6237a597 100644
--- a/fs/ncpfs/ncplib_kernel.c
+++ b/fs/ncpfs/ncplib_kernel.c
@@ -1113,11 +1113,13 @@ ncp__io2vol(struct ncp_server *server, unsigned char *vname, unsigned int *vlen,
 
 		if (NCP_IS_FLAG(server, NCP_FLAG_UTF8)) {
 			int k;
+			unicode_t u;
 
-			k = utf8_mbtowc(&ec, iname, iname_end - iname);
-			if (k < 0)
+			k = utf8_to_utf32(iname, iname_end - iname, &u);
+			if (k < 0 || u > MAX_WCHAR_T)
 				return -EINVAL;
 			iname += k;
+			ec = u;
 		} else {
 			if (*iname == NCP_ESC) {
 				int k;
@@ -1214,7 +1216,7 @@ ncp__vol2io(struct ncp_server *server, unsigned char *iname, unsigned int *ilen,
 		if (NCP_IS_FLAG(server, NCP_FLAG_UTF8)) {
 			int k;
 
-			k = utf8_wctomb(iname, ec, iname_end - iname);
+			k = utf32_to_utf8(ec, iname, iname_end - iname);
 			if (k < 0) {
 				err = -ENAMETOOLONG;
 				goto quit;
diff --git a/fs/nfs/iostat.h b/fs/nfs/iostat.h
index a2ab2529b5c..ceda50aad73 100644
--- a/fs/nfs/iostat.h
+++ b/fs/nfs/iostat.h
@@ -31,7 +31,7 @@ static inline void nfs_inc_server_stats(const struct nfs_server *server,
 	cpu = get_cpu();
 	iostats = per_cpu_ptr(server->io_stats, cpu);
 	iostats->events[stat]++;
-	put_cpu_no_resched();
+	put_cpu();
 }
 
 static inline void nfs_inc_stats(const struct inode *inode,
@@ -50,7 +50,7 @@ static inline void nfs_add_server_stats(const struct nfs_server *server,
 	cpu = get_cpu();
 	iostats = per_cpu_ptr(server->io_stats, cpu);
 	iostats->bytes[stat] += addend;
-	put_cpu_no_resched();
+	put_cpu();
 }
 
 static inline void nfs_add_stats(const struct inode *inode,
@@ -71,7 +71,7 @@ static inline void nfs_add_fscache_stats(struct inode *inode,
 	cpu = get_cpu();
 	iostats = per_cpu_ptr(NFS_SERVER(inode)->io_stats, cpu);
 	iostats->fscache[stat] += addend;
-	put_cpu_no_resched();
+	put_cpu();
 }
 #endif
 
diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index 064279e33bb..36df60b6d8a 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -31,21 +31,26 @@
 #include "dat.h"
 #include "alloc.h"
 
+struct inode *nilfs_bmap_get_dat(const struct nilfs_bmap *bmap)
+{
+	return nilfs_dat_inode(NILFS_I_NILFS(bmap->b_inode));
+}
+
 int nilfs_bmap_lookup_at_level(struct nilfs_bmap *bmap, __u64 key, int level,
 			       __u64 *ptrp)
 {
-	__u64 ptr;
+	sector_t blocknr;
 	int ret;
 
 	down_read(&bmap->b_sem);
 	ret = bmap->b_ops->bop_lookup(bmap, key, level, ptrp);
 	if (ret < 0)
 		goto out;
-	if (bmap->b_pops->bpop_translate != NULL) {
-		ret = bmap->b_pops->bpop_translate(bmap, *ptrp, &ptr);
-		if (ret < 0)
-			goto out;
-		*ptrp = ptr;
+	if (NILFS_BMAP_USE_VBN(bmap)) {
+		ret = nilfs_dat_translate(nilfs_bmap_get_dat(bmap), *ptrp,
+					  &blocknr);
+		if (!ret)
+			*ptrp = blocknr;
 	}
 
  out:
@@ -53,6 +58,16 @@ int nilfs_bmap_lookup_at_level(struct nilfs_bmap *bmap, __u64 key, int level,
 	return ret;
 }
 
+int nilfs_bmap_lookup_contig(struct nilfs_bmap *bmap, __u64 key, __u64 *ptrp,
+			     unsigned maxblocks)
+{
+	int ret;
+
+	down_read(&bmap->b_sem);
+	ret = bmap->b_ops->bop_lookup_contig(bmap, key, ptrp, maxblocks);
+	up_read(&bmap->b_sem);
+	return ret;
+}
 
 /**
  * nilfs_bmap_lookup - find a record
@@ -101,8 +116,7 @@ static int nilfs_bmap_do_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
 			if (n < 0)
 				return n;
 			ret = nilfs_btree_convert_and_insert(
-				bmap, key, ptr, keys, ptrs, n,
-				NILFS_BMAP_LARGE_LOW, NILFS_BMAP_LARGE_HIGH);
+				bmap, key, ptr, keys, ptrs, n);
 			if (ret == 0)
 				bmap->b_u.u_flags |= NILFS_BMAP_LARGE;
 
@@ -158,8 +172,7 @@ static int nilfs_bmap_do_delete(struct nilfs_bmap *bmap, __u64 key)
 			if (n < 0)
 				return n;
 			ret = nilfs_direct_delete_and_convert(
-				bmap, key, keys, ptrs, n,
-				NILFS_BMAP_SMALL_LOW, NILFS_BMAP_SMALL_HIGH);
+				bmap, key, keys, ptrs, n);
 			if (ret == 0)
 				bmap->b_u.u_flags &= ~NILFS_BMAP_LARGE;
 
@@ -417,38 +430,6 @@ void nilfs_bmap_sub_blocks(const struct nilfs_bmap *bmap, int n)
 		mark_inode_dirty(bmap->b_inode);
 }
 
-int nilfs_bmap_get_block(const struct nilfs_bmap *bmap, __u64 ptr,
-			 struct buffer_head **bhp)
-{
-	return nilfs_btnode_get(&NILFS_BMAP_I(bmap)->i_btnode_cache,
-				ptr, 0, bhp, 0);
-}
-
-void nilfs_bmap_put_block(const struct nilfs_bmap *bmap,
-			  struct buffer_head *bh)
-{
-	brelse(bh);
-}
-
-int nilfs_bmap_get_new_block(const struct nilfs_bmap *bmap, __u64 ptr,
-			     struct buffer_head **bhp)
-{
-	int ret;
-
-	ret = nilfs_btnode_get(&NILFS_BMAP_I(bmap)->i_btnode_cache,
-			       ptr, 0, bhp, 1);
-	if (ret < 0)
-		return ret;
-	set_buffer_nilfs_volatile(*bhp);
-	return 0;
-}
-
-void nilfs_bmap_delete_block(const struct nilfs_bmap *bmap,
-			     struct buffer_head *bh)
-{
-	nilfs_btnode_delete(bh);
-}
-
 __u64 nilfs_bmap_data_get_key(const struct nilfs_bmap *bmap,
 			      const struct buffer_head *bh)
 {
@@ -476,11 +457,6 @@ __u64 nilfs_bmap_find_target_seq(const struct nilfs_bmap *bmap, __u64 key)
 		return NILFS_BMAP_INVALID_PTR;
 }
 
-static struct inode *nilfs_bmap_get_dat(const struct nilfs_bmap *bmap)
-{
-	return nilfs_dat_inode(NILFS_I_NILFS(bmap->b_inode));
-}
-
 #define NILFS_BMAP_GROUP_DIV	8
 __u64 nilfs_bmap_find_target_in_group(const struct nilfs_bmap *bmap)
 {
@@ -493,64 +469,51 @@ __u64 nilfs_bmap_find_target_in_group(const struct nilfs_bmap *bmap)
 		(entries_per_group / NILFS_BMAP_GROUP_DIV);
 }
 
-static int nilfs_bmap_prepare_alloc_v(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
+int nilfs_bmap_prepare_alloc_v(struct nilfs_bmap *bmap,
+				 union nilfs_bmap_ptr_req *req)
 {
 	return nilfs_dat_prepare_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
 
-static void nilfs_bmap_commit_alloc_v(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
+void nilfs_bmap_commit_alloc_v(struct nilfs_bmap *bmap,
+				 union nilfs_bmap_ptr_req *req)
 {
 	nilfs_dat_commit_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
 
-static void nilfs_bmap_abort_alloc_v(struct nilfs_bmap *bmap,
-				     union nilfs_bmap_ptr_req *req)
+void nilfs_bmap_abort_alloc_v(struct nilfs_bmap *bmap,
+			      union nilfs_bmap_ptr_req *req)
 {
 	nilfs_dat_abort_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
 
-static int nilfs_bmap_prepare_start_v(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
+int nilfs_bmap_start_v(struct nilfs_bmap *bmap, union nilfs_bmap_ptr_req *req,
+		       sector_t blocknr)
 {
-	return nilfs_dat_prepare_start(nilfs_bmap_get_dat(bmap), &req->bpr_req);
-}
-
-static void nilfs_bmap_commit_start_v(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req,
-				      sector_t blocknr)
-{
-	nilfs_dat_commit_start(nilfs_bmap_get_dat(bmap), &req->bpr_req,
-			       blocknr);
-}
+	struct inode *dat = nilfs_bmap_get_dat(bmap);
+	int ret;
 
-static void nilfs_bmap_abort_start_v(struct nilfs_bmap *bmap,
-				     union nilfs_bmap_ptr_req *req)
-{
-	nilfs_dat_abort_start(nilfs_bmap_get_dat(bmap), &req->bpr_req);
+	ret = nilfs_dat_prepare_start(dat, &req->bpr_req);
+	if (likely(!ret))
+		nilfs_dat_commit_start(dat, &req->bpr_req, blocknr);
+	return ret;
 }
 
-static int nilfs_bmap_prepare_end_v(struct nilfs_bmap *bmap,
-				    union nilfs_bmap_ptr_req *req)
+int nilfs_bmap_prepare_end_v(struct nilfs_bmap *bmap,
+			     union nilfs_bmap_ptr_req *req)
 {
 	return nilfs_dat_prepare_end(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
 
-static void nilfs_bmap_commit_end_v(struct nilfs_bmap *bmap,
-				    union nilfs_bmap_ptr_req *req)
-{
-	nilfs_dat_commit_end(nilfs_bmap_get_dat(bmap), &req->bpr_req, 0);
-}
-
-static void nilfs_bmap_commit_end_vmdt(struct nilfs_bmap *bmap,
-				       union nilfs_bmap_ptr_req *req)
+void nilfs_bmap_commit_end_v(struct nilfs_bmap *bmap,
+			     union nilfs_bmap_ptr_req *req)
 {
-	nilfs_dat_commit_end(nilfs_bmap_get_dat(bmap), &req->bpr_req, 1);
+	nilfs_dat_commit_end(nilfs_bmap_get_dat(bmap), &req->bpr_req,
+			     bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
 }
 
-static void nilfs_bmap_abort_end_v(struct nilfs_bmap *bmap,
-				   union nilfs_bmap_ptr_req *req)
+void nilfs_bmap_abort_end_v(struct nilfs_bmap *bmap,
+			    union nilfs_bmap_ptr_req *req)
 {
 	nilfs_dat_abort_end(nilfs_bmap_get_dat(bmap), &req->bpr_req);
 }
@@ -566,128 +529,44 @@ int nilfs_bmap_mark_dirty(const struct nilfs_bmap *bmap, __u64 vblocknr)
 	return nilfs_dat_mark_dirty(nilfs_bmap_get_dat(bmap), vblocknr);
 }
 
-int nilfs_bmap_prepare_update(struct nilfs_bmap *bmap,
-			      union nilfs_bmap_ptr_req *oldreq,
-			      union nilfs_bmap_ptr_req *newreq)
+int nilfs_bmap_prepare_update_v(struct nilfs_bmap *bmap,
+				union nilfs_bmap_ptr_req *oldreq,
+				union nilfs_bmap_ptr_req *newreq)
 {
+	struct inode *dat = nilfs_bmap_get_dat(bmap);
 	int ret;
 
-	ret = bmap->b_pops->bpop_prepare_end_ptr(bmap, oldreq);
+	ret = nilfs_dat_prepare_end(dat, &oldreq->bpr_req);
 	if (ret < 0)
 		return ret;
-	ret = bmap->b_pops->bpop_prepare_alloc_ptr(bmap, newreq);
+	ret = nilfs_dat_prepare_alloc(dat, &newreq->bpr_req);
 	if (ret < 0)
-		bmap->b_pops->bpop_abort_end_ptr(bmap, oldreq);
+		nilfs_dat_abort_end(dat, &oldreq->bpr_req);
 
 	return ret;
 }
 
-void nilfs_bmap_commit_update(struct nilfs_bmap *bmap,
-			      union nilfs_bmap_ptr_req *oldreq,
-			      union nilfs_bmap_ptr_req *newreq)
+void nilfs_bmap_commit_update_v(struct nilfs_bmap *bmap,
+				union nilfs_bmap_ptr_req *oldreq,
+				union nilfs_bmap_ptr_req *newreq)
 {
-	bmap->b_pops->bpop_commit_end_ptr(bmap, oldreq);
-	bmap->b_pops->bpop_commit_alloc_ptr(bmap, newreq);
-}
+	struct inode *dat = nilfs_bmap_get_dat(bmap);
 
-void nilfs_bmap_abort_update(struct nilfs_bmap *bmap,
-			     union nilfs_bmap_ptr_req *oldreq,
-			     union nilfs_bmap_ptr_req *newreq)
-{
-	bmap->b_pops->bpop_abort_end_ptr(bmap, oldreq);
-	bmap->b_pops->bpop_abort_alloc_ptr(bmap, newreq);
+	nilfs_dat_commit_end(dat, &oldreq->bpr_req,
+			     bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
+	nilfs_dat_commit_alloc(dat, &newreq->bpr_req);
 }
 
-static int nilfs_bmap_translate_v(const struct nilfs_bmap *bmap, __u64 ptr,
-				  __u64 *ptrp)
+void nilfs_bmap_abort_update_v(struct nilfs_bmap *bmap,
+			       union nilfs_bmap_ptr_req *oldreq,
+			       union nilfs_bmap_ptr_req *newreq)
 {
-	sector_t blocknr;
-	int ret;
-
-	ret = nilfs_dat_translate(nilfs_bmap_get_dat(bmap), ptr, &blocknr);
-	if (ret < 0)
-		return ret;
-	if (ptrp != NULL)
-		*ptrp = blocknr;
-	return 0;
-}
+	struct inode *dat = nilfs_bmap_get_dat(bmap);
 
-static int nilfs_bmap_prepare_alloc_p(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
-{
-	/* ignore target ptr */
-	req->bpr_ptr = bmap->b_last_allocated_ptr++;
-	return 0;
+	nilfs_dat_abort_end(dat, &oldreq->bpr_req);
+	nilfs_dat_abort_alloc(dat, &newreq->bpr_req);
 }
 
-static void nilfs_bmap_commit_alloc_p(struct nilfs_bmap *bmap,
-				      union nilfs_bmap_ptr_req *req)
-{
-	/* do nothing */
-}
-
-static void nilfs_bmap_abort_alloc_p(struct nilfs_bmap *bmap,
-				     union nilfs_bmap_ptr_req *req)
-{
-	bmap->b_last_allocated_ptr--;
-}
-
-static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_v = {
-	.bpop_prepare_alloc_ptr	=	nilfs_bmap_prepare_alloc_v,
-	.bpop_commit_alloc_ptr	=	nilfs_bmap_commit_alloc_v,
-	.bpop_abort_alloc_ptr	=	nilfs_bmap_abort_alloc_v,
-	.bpop_prepare_start_ptr	=	nilfs_bmap_prepare_start_v,
-	.bpop_commit_start_ptr	=	nilfs_bmap_commit_start_v,
-	.bpop_abort_start_ptr	=	nilfs_bmap_abort_start_v,
-	.bpop_prepare_end_ptr	=	nilfs_bmap_prepare_end_v,
-	.bpop_commit_end_ptr	=	nilfs_bmap_commit_end_v,
-	.bpop_abort_end_ptr	=	nilfs_bmap_abort_end_v,
-
-	.bpop_translate		=	nilfs_bmap_translate_v,
-};
-
-static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_vmdt = {
-	.bpop_prepare_alloc_ptr	=	nilfs_bmap_prepare_alloc_v,
-	.bpop_commit_alloc_ptr	=	nilfs_bmap_commit_alloc_v,
-	.bpop_abort_alloc_ptr	=	nilfs_bmap_abort_alloc_v,
-	.bpop_prepare_start_ptr	=	nilfs_bmap_prepare_start_v,
-	.bpop_commit_start_ptr	=	nilfs_bmap_commit_start_v,
-	.bpop_abort_start_ptr	=	nilfs_bmap_abort_start_v,
-	.bpop_prepare_end_ptr	=	nilfs_bmap_prepare_end_v,
-	.bpop_commit_end_ptr	=	nilfs_bmap_commit_end_vmdt,
-	.bpop_abort_end_ptr	=	nilfs_bmap_abort_end_v,
-
-	.bpop_translate		=	nilfs_bmap_translate_v,
-};
-
-static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_p = {
-	.bpop_prepare_alloc_ptr	=	nilfs_bmap_prepare_alloc_p,
-	.bpop_commit_alloc_ptr	=	nilfs_bmap_commit_alloc_p,
-	.bpop_abort_alloc_ptr	=	nilfs_bmap_abort_alloc_p,
-	.bpop_prepare_start_ptr	=	NULL,
-	.bpop_commit_start_ptr	=	NULL,
-	.bpop_abort_start_ptr	=	NULL,
-	.bpop_prepare_end_ptr	=	NULL,
-	.bpop_commit_end_ptr	=	NULL,
-	.bpop_abort_end_ptr	=	NULL,
-
-	.bpop_translate		=	NULL,
-};
-
-static const struct nilfs_bmap_ptr_operations nilfs_bmap_ptr_ops_gc = {
-	.bpop_prepare_alloc_ptr	=	NULL,
-	.bpop_commit_alloc_ptr	=	NULL,
-	.bpop_abort_alloc_ptr	=	NULL,
-	.bpop_prepare_start_ptr	=	NULL,
-	.bpop_commit_start_ptr	=	NULL,
-	.bpop_abort_start_ptr	=	NULL,
-	.bpop_prepare_end_ptr	=	NULL,
-	.bpop_commit_end_ptr	=	NULL,
-	.bpop_abort_end_ptr	=	NULL,
-
-	.bpop_translate		=	NULL,
-};
-
 static struct lock_class_key nilfs_bmap_dat_lock_key;
 
 /**
@@ -714,31 +593,26 @@ int nilfs_bmap_read(struct nilfs_bmap *bmap, struct nilfs_inode *raw_inode)
 	bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
 	switch (bmap->b_inode->i_ino) {
 	case NILFS_DAT_INO:
-		bmap->b_pops = &nilfs_bmap_ptr_ops_p;
-		bmap->b_last_allocated_key = 0;	/* XXX: use macro */
+		bmap->b_ptr_type = NILFS_BMAP_PTR_P;
+		bmap->b_last_allocated_key = 0;
 		bmap->b_last_allocated_ptr = NILFS_BMAP_NEW_PTR_INIT;
 		lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
 		break;
 	case NILFS_CPFILE_INO:
 	case NILFS_SUFILE_INO:
-		bmap->b_pops = &nilfs_bmap_ptr_ops_vmdt;
-		bmap->b_last_allocated_key = 0;	/* XXX: use macro */
+		bmap->b_ptr_type = NILFS_BMAP_PTR_VS;
+		bmap->b_last_allocated_key = 0;
 		bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
 		break;
 	default:
-		bmap->b_pops = &nilfs_bmap_ptr_ops_v;
-		bmap->b_last_allocated_key = 0;	/* XXX: use macro */
+		bmap->b_ptr_type = NILFS_BMAP_PTR_VM;
+		bmap->b_last_allocated_key = 0;
 		bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
 		break;
 	}
 
 	return (bmap->b_u.u_flags & NILFS_BMAP_LARGE) ?
-		nilfs_btree_init(bmap,
-				 NILFS_BMAP_LARGE_LOW,
-				 NILFS_BMAP_LARGE_HIGH) :
-		nilfs_direct_init(bmap,
-				  NILFS_BMAP_SMALL_LOW,
-				  NILFS_BMAP_SMALL_HIGH);
+		nilfs_btree_init(bmap) : nilfs_direct_init(bmap);
 }
 
 /**
@@ -764,7 +638,7 @@ void nilfs_bmap_init_gc(struct nilfs_bmap *bmap)
 	memset(&bmap->b_u, 0, NILFS_BMAP_SIZE);
 	init_rwsem(&bmap->b_sem);
 	bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
-	bmap->b_pops = &nilfs_bmap_ptr_ops_gc;
+	bmap->b_ptr_type = NILFS_BMAP_PTR_U;
 	bmap->b_last_allocated_key = 0;
 	bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
 	bmap->b_state = 0;
diff --git a/fs/nilfs2/bmap.h b/fs/nilfs2/bmap.h
index 4f2708abb1b..b2890cdcef1 100644
--- a/fs/nilfs2/bmap.h
+++ b/fs/nilfs2/bmap.h
@@ -64,6 +64,8 @@ struct nilfs_bmap_stats {
  */
 struct nilfs_bmap_operations {
 	int (*bop_lookup)(const struct nilfs_bmap *, __u64, int, __u64 *);
+	int (*bop_lookup_contig)(const struct nilfs_bmap *, __u64, __u64 *,
+				 unsigned);
 	int (*bop_insert)(struct nilfs_bmap *, __u64, __u64);
 	int (*bop_delete)(struct nilfs_bmap *, __u64);
 	void (*bop_clear)(struct nilfs_bmap *);
@@ -86,34 +88,6 @@ struct nilfs_bmap_operations {
 };
 
 
-/**
- * struct nilfs_bmap_ptr_operations - bmap ptr operation table
- */
-struct nilfs_bmap_ptr_operations {
-	int (*bpop_prepare_alloc_ptr)(struct nilfs_bmap *,
-				      union nilfs_bmap_ptr_req *);
-	void (*bpop_commit_alloc_ptr)(struct nilfs_bmap *,
-				      union nilfs_bmap_ptr_req *);
-	void (*bpop_abort_alloc_ptr)(struct nilfs_bmap *,
-				     union nilfs_bmap_ptr_req *);
-	int (*bpop_prepare_start_ptr)(struct nilfs_bmap *,
-				      union nilfs_bmap_ptr_req *);
-	void (*bpop_commit_start_ptr)(struct nilfs_bmap *,
-				      union nilfs_bmap_ptr_req *,
-				      sector_t);
-	void (*bpop_abort_start_ptr)(struct nilfs_bmap *,
-				     union nilfs_bmap_ptr_req *);
-	int (*bpop_prepare_end_ptr)(struct nilfs_bmap *,
-				    union nilfs_bmap_ptr_req *);
-	void (*bpop_commit_end_ptr)(struct nilfs_bmap *,
-				    union nilfs_bmap_ptr_req *);
-	void (*bpop_abort_end_ptr)(struct nilfs_bmap *,
-				   union nilfs_bmap_ptr_req *);
-
-	int (*bpop_translate)(const struct nilfs_bmap *, __u64, __u64 *);
-};
-
-
 #define NILFS_BMAP_SIZE		(NILFS_INODE_BMAP_SIZE * sizeof(__le64))
 #define NILFS_BMAP_KEY_BIT	(sizeof(unsigned long) * 8 /* CHAR_BIT */)
 #define NILFS_BMAP_NEW_PTR_INIT	\
@@ -131,11 +105,9 @@ static inline int nilfs_bmap_is_new_ptr(unsigned long ptr)
  * @b_sem: semaphore
  * @b_inode: owner of bmap
  * @b_ops: bmap operation table
- * @b_pops: bmap ptr operation table
- * @b_low: low watermark of conversion
- * @b_high: high watermark of conversion
  * @b_last_allocated_key: last allocated key for data block
  * @b_last_allocated_ptr: last allocated ptr for data block
+ * @b_ptr_type: pointer type
  * @b_state: state
  */
 struct nilfs_bmap {
@@ -146,14 +118,22 @@ struct nilfs_bmap {
 	struct rw_semaphore b_sem;
 	struct inode *b_inode;
 	const struct nilfs_bmap_operations *b_ops;
-	const struct nilfs_bmap_ptr_operations *b_pops;
-	__u64 b_low;
-	__u64 b_high;
 	__u64 b_last_allocated_key;
 	__u64 b_last_allocated_ptr;
+	int b_ptr_type;
 	int b_state;
 };
 
+/* pointer type */
+#define NILFS_BMAP_PTR_P	0	/* physical block number (i.e. LBN) */
+#define NILFS_BMAP_PTR_VS	1	/* virtual block number (single
+					   version) */
+#define NILFS_BMAP_PTR_VM	2	/* virtual block number (has multiple
+					   versions) */
+#define NILFS_BMAP_PTR_U	(-1)	/* never perform pointer operations */
+
+#define NILFS_BMAP_USE_VBN(bmap)	((bmap)->b_ptr_type > 0)
+
 /* state */
 #define NILFS_BMAP_DIRTY	0x00000001
 
@@ -162,6 +142,7 @@ int nilfs_bmap_test_and_clear_dirty(struct nilfs_bmap *);
 int nilfs_bmap_read(struct nilfs_bmap *, struct nilfs_inode *);
 void nilfs_bmap_write(struct nilfs_bmap *, struct nilfs_inode *);
 int nilfs_bmap_lookup(struct nilfs_bmap *, unsigned long, unsigned long *);
+int nilfs_bmap_lookup_contig(struct nilfs_bmap *, __u64, __u64 *, unsigned);
 int nilfs_bmap_insert(struct nilfs_bmap *, unsigned long, unsigned long);
 int nilfs_bmap_delete(struct nilfs_bmap *, unsigned long);
 int nilfs_bmap_last_key(struct nilfs_bmap *, unsigned long *);
@@ -182,7 +163,67 @@ void nilfs_bmap_commit_gcdat(struct nilfs_bmap *, struct nilfs_bmap *);
 /*
  * Internal use only
  */
+struct inode *nilfs_bmap_get_dat(const struct nilfs_bmap *);
+int nilfs_bmap_prepare_alloc_v(struct nilfs_bmap *,
+			       union nilfs_bmap_ptr_req *);
+void nilfs_bmap_commit_alloc_v(struct nilfs_bmap *,
+			       union nilfs_bmap_ptr_req *);
+void nilfs_bmap_abort_alloc_v(struct nilfs_bmap *,
+			      union nilfs_bmap_ptr_req *);
 
+static inline int nilfs_bmap_prepare_alloc_ptr(struct nilfs_bmap *bmap,
+					       union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		return nilfs_bmap_prepare_alloc_v(bmap, req);
+	/* ignore target ptr */
+	req->bpr_ptr = bmap->b_last_allocated_ptr++;
+	return 0;
+}
+
+static inline void nilfs_bmap_commit_alloc_ptr(struct nilfs_bmap *bmap,
+					       union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_bmap_commit_alloc_v(bmap, req);
+}
+
+static inline void nilfs_bmap_abort_alloc_ptr(struct nilfs_bmap *bmap,
+					      union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_bmap_abort_alloc_v(bmap, req);
+	else
+		bmap->b_last_allocated_ptr--;
+}
+
+int nilfs_bmap_prepare_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
+void nilfs_bmap_commit_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
+void nilfs_bmap_abort_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
+
+static inline int nilfs_bmap_prepare_end_ptr(struct nilfs_bmap *bmap,
+					     union nilfs_bmap_ptr_req *req)
+{
+	return NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_bmap_prepare_end_v(bmap, req) : 0;
+}
+
+static inline void nilfs_bmap_commit_end_ptr(struct nilfs_bmap *bmap,
+					     union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_bmap_commit_end_v(bmap, req);
+}
+
+static inline void nilfs_bmap_abort_end_ptr(struct nilfs_bmap *bmap,
+					    union nilfs_bmap_ptr_req *req)
+{
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_bmap_abort_end_v(bmap, req);
+}
+
+int nilfs_bmap_start_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *,
+		       sector_t);
 int nilfs_bmap_move_v(const struct nilfs_bmap *, __u64, sector_t);
 int nilfs_bmap_mark_dirty(const struct nilfs_bmap *, __u64);
 
@@ -193,28 +234,20 @@ __u64 nilfs_bmap_data_get_key(const struct nilfs_bmap *,
 __u64 nilfs_bmap_find_target_seq(const struct nilfs_bmap *, __u64);
 __u64 nilfs_bmap_find_target_in_group(const struct nilfs_bmap *);
 
-int nilfs_bmap_prepare_update(struct nilfs_bmap *,
-			      union nilfs_bmap_ptr_req *,
-			      union nilfs_bmap_ptr_req *);
-void nilfs_bmap_commit_update(struct nilfs_bmap *,
-			      union nilfs_bmap_ptr_req *,
-			      union nilfs_bmap_ptr_req *);
-void nilfs_bmap_abort_update(struct nilfs_bmap *,
-			     union nilfs_bmap_ptr_req *,
-			     union nilfs_bmap_ptr_req *);
+int nilfs_bmap_prepare_update_v(struct nilfs_bmap *,
+				union nilfs_bmap_ptr_req *,
+				union nilfs_bmap_ptr_req *);
+void nilfs_bmap_commit_update_v(struct nilfs_bmap *,
+				union nilfs_bmap_ptr_req *,
+				union nilfs_bmap_ptr_req *);
+void nilfs_bmap_abort_update_v(struct nilfs_bmap *,
+			       union nilfs_bmap_ptr_req *,
+			       union nilfs_bmap_ptr_req *);
 
 void nilfs_bmap_add_blocks(const struct nilfs_bmap *, int);
 void nilfs_bmap_sub_blocks(const struct nilfs_bmap *, int);
 
 
-int nilfs_bmap_get_block(const struct nilfs_bmap *, __u64,
-			 struct buffer_head **);
-void nilfs_bmap_put_block(const struct nilfs_bmap *, struct buffer_head *);
-int nilfs_bmap_get_new_block(const struct nilfs_bmap *, __u64,
-			     struct buffer_head **);
-void nilfs_bmap_delete_block(const struct nilfs_bmap *, struct buffer_head *);
-
-
 /* Assume that bmap semaphore is locked. */
 static inline int nilfs_bmap_dirty(const struct nilfs_bmap *bmap)
 {
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 4cc07b2c30e..7e0b61be212 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -46,15 +46,18 @@ void nilfs_btnode_cache_init_once(struct address_space *btnc)
 	INIT_LIST_HEAD(&btnc->i_mmap_nonlinear);
 }
 
-static struct address_space_operations def_btnode_aops;
+static struct address_space_operations def_btnode_aops = {
+	.sync_page		= block_sync_page,
+};
 
-void nilfs_btnode_cache_init(struct address_space *btnc)
+void nilfs_btnode_cache_init(struct address_space *btnc,
+			     struct backing_dev_info *bdi)
 {
 	btnc->host = NULL;  /* can safely set to host inode ? */
 	btnc->flags = 0;
 	mapping_set_gfp_mask(btnc, GFP_NOFS);
 	btnc->assoc_mapping = NULL;
-	btnc->backing_dev_info = &default_backing_dev_info;
+	btnc->backing_dev_info = bdi;
 	btnc->a_ops = &def_btnode_aops;
 }
 
diff --git a/fs/nilfs2/btnode.h b/fs/nilfs2/btnode.h
index 35faa86444a..3e2275172ed 100644
--- a/fs/nilfs2/btnode.h
+++ b/fs/nilfs2/btnode.h
@@ -38,7 +38,7 @@ struct nilfs_btnode_chkey_ctxt {
 };
 
 void nilfs_btnode_cache_init_once(struct address_space *);
-void nilfs_btnode_cache_init(struct address_space *);
+void nilfs_btnode_cache_init(struct address_space *, struct backing_dev_info *);
 void nilfs_btnode_cache_clear(struct address_space *);
 int nilfs_btnode_submit_block(struct address_space *, __u64, sector_t,
 			      struct buffer_head **, int);
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index 6b37a276729..aa412724b64 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -29,6 +29,7 @@
 #include "btnode.h"
 #include "btree.h"
 #include "alloc.h"
+#include "dat.h"
 
 /**
  * struct nilfs_btree_path - A path on which B-tree operations are executed
@@ -109,8 +110,7 @@ static void nilfs_btree_clear_path(const struct nilfs_btree *btree,
 	     level < NILFS_BTREE_LEVEL_MAX;
 	     level++) {
 		if (path[level].bp_bh != NULL) {
-			nilfs_bmap_put_block(&btree->bt_bmap,
-					     path[level].bp_bh);
+			brelse(path[level].bp_bh);
 			path[level].bp_bh = NULL;
 		}
 		/* sib_bh is released or deleted by prepare or commit
@@ -123,10 +123,29 @@ static void nilfs_btree_clear_path(const struct nilfs_btree *btree,
 	}
 }
 
-
 /*
  * B-tree node operations
  */
+static int nilfs_btree_get_block(const struct nilfs_btree *btree, __u64 ptr,
+				 struct buffer_head **bhp)
+{
+	struct address_space *btnc =
+		&NILFS_BMAP_I((struct nilfs_bmap *)btree)->i_btnode_cache;
+	return nilfs_btnode_get(btnc, ptr, 0, bhp, 0);
+}
+
+static int nilfs_btree_get_new_block(const struct nilfs_btree *btree,
+				     __u64 ptr, struct buffer_head **bhp)
+{
+	struct address_space *btnc =
+		&NILFS_BMAP_I((struct nilfs_bmap *)btree)->i_btnode_cache;
+	int ret;
+
+	ret = nilfs_btnode_get(btnc, ptr, 0, bhp, 1);
+	if (!ret)
+		set_buffer_nilfs_volatile(*bhp);
+	return ret;
+}
 
 static inline int
 nilfs_btree_node_get_flags(const struct nilfs_btree *btree,
@@ -488,8 +507,7 @@ static int nilfs_btree_do_lookup(const struct nilfs_btree *btree,
 	path[level].bp_index = index;
 
 	for (level--; level >= minlevel; level--) {
-		ret = nilfs_bmap_get_block(&btree->bt_bmap, ptr,
-					   &path[level].bp_bh);
+		ret = nilfs_btree_get_block(btree, ptr, &path[level].bp_bh);
 		if (ret < 0)
 			return ret;
 		node = nilfs_btree_get_nonroot_node(btree, path, level);
@@ -535,8 +553,7 @@ static int nilfs_btree_do_lookup_last(const struct nilfs_btree *btree,
 	path[level].bp_index = index;
 
 	for (level--; level > 0; level--) {
-		ret = nilfs_bmap_get_block(&btree->bt_bmap, ptr,
-					   &path[level].bp_bh);
+		ret = nilfs_btree_get_block(btree, ptr, &path[level].bp_bh);
 		if (ret < 0)
 			return ret;
 		node = nilfs_btree_get_nonroot_node(btree, path, level);
@@ -579,6 +596,87 @@ static int nilfs_btree_lookup(const struct nilfs_bmap *bmap,
 	return ret;
 }
 
+static int nilfs_btree_lookup_contig(const struct nilfs_bmap *bmap,
+				     __u64 key, __u64 *ptrp, unsigned maxblocks)
+{
+	struct nilfs_btree *btree = (struct nilfs_btree *)bmap;
+	struct nilfs_btree_path *path;
+	struct nilfs_btree_node *node;
+	struct inode *dat = NULL;
+	__u64 ptr, ptr2;
+	sector_t blocknr;
+	int level = NILFS_BTREE_LEVEL_NODE_MIN;
+	int ret, cnt, index, maxlevel;
+
+	path = nilfs_btree_alloc_path(btree);
+	if (path == NULL)
+		return -ENOMEM;
+	nilfs_btree_init_path(btree, path);
+	ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level);
+	if (ret < 0)
+		goto out;
+
+	if (NILFS_BMAP_USE_VBN(bmap)) {
+		dat = nilfs_bmap_get_dat(bmap);
+		ret = nilfs_dat_translate(dat, ptr, &blocknr);
+		if (ret < 0)
+			goto out;
+		ptr = blocknr;
+	}
+	cnt = 1;
+	if (cnt == maxblocks)
+		goto end;
+
+	maxlevel = nilfs_btree_height(btree) - 1;
+	node = nilfs_btree_get_node(btree, path, level);
+	index = path[level].bp_index + 1;
+	for (;;) {
+		while (index < nilfs_btree_node_get_nchildren(btree, node)) {
+			if (nilfs_btree_node_get_key(btree, node, index) !=
+			    key + cnt)
+				goto end;
+			ptr2 = nilfs_btree_node_get_ptr(btree, node, index);
+			if (dat) {
+				ret = nilfs_dat_translate(dat, ptr2, &blocknr);
+				if (ret < 0)
+					goto out;
+				ptr2 = blocknr;
+			}
+			if (ptr2 != ptr + cnt || ++cnt == maxblocks)
+				goto end;
+			index++;
+			continue;
+		}
+		if (level == maxlevel)
+			break;
+
+		/* look-up right sibling node */
+		node = nilfs_btree_get_node(btree, path, level + 1);
+		index = path[level + 1].bp_index + 1;
+		if (index >= nilfs_btree_node_get_nchildren(btree, node) ||
+		    nilfs_btree_node_get_key(btree, node, index) != key + cnt)
+			break;
+		ptr2 = nilfs_btree_node_get_ptr(btree, node, index);
+		path[level + 1].bp_index = index;
+
+		brelse(path[level].bp_bh);
+		path[level].bp_bh = NULL;
+		ret = nilfs_btree_get_block(btree, ptr2, &path[level].bp_bh);
+		if (ret < 0)
+			goto out;
+		node = nilfs_btree_get_nonroot_node(btree, path, level);
+		index = 0;
+		path[level].bp_index = index;
+	}
+ end:
+	*ptrp = ptr;
+	ret = cnt;
+ out:
+	nilfs_btree_clear_path(btree, path);
+	nilfs_btree_free_path(btree, path);
+	return ret;
+}
+
 static void nilfs_btree_promote_key(struct nilfs_btree *btree,
 				    struct nilfs_btree_path *path,
 				    int level, __u64 key)
@@ -669,13 +767,13 @@ static void nilfs_btree_carry_left(struct nilfs_btree *btree,
 				nilfs_btree_node_get_key(btree, node, 0));
 
 	if (move) {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_bh);
+		brelse(path[level].bp_bh);
 		path[level].bp_bh = path[level].bp_sib_bh;
 		path[level].bp_sib_bh = NULL;
 		path[level].bp_index += lnchildren;
 		path[level + 1].bp_index--;
 	} else {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+		brelse(path[level].bp_sib_bh);
 		path[level].bp_sib_bh = NULL;
 		path[level].bp_index -= n;
 	}
@@ -722,14 +820,14 @@ static void nilfs_btree_carry_right(struct nilfs_btree *btree,
 	path[level + 1].bp_index--;
 
 	if (move) {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_bh);
+		brelse(path[level].bp_bh);
 		path[level].bp_bh = path[level].bp_sib_bh;
 		path[level].bp_sib_bh = NULL;
 		path[level].bp_index -=
 			nilfs_btree_node_get_nchildren(btree, node);
 		path[level + 1].bp_index++;
 	} else {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+		brelse(path[level].bp_sib_bh);
 		path[level].bp_sib_bh = NULL;
 	}
 
@@ -781,7 +879,7 @@ static void nilfs_btree_split(struct nilfs_btree *btree,
 		*keyp = nilfs_btree_node_get_key(btree, right, 0);
 		*ptrp = path[level].bp_newreq.bpr_ptr;
 
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_bh);
+		brelse(path[level].bp_bh);
 		path[level].bp_bh = path[level].bp_sib_bh;
 		path[level].bp_sib_bh = NULL;
 	} else {
@@ -790,7 +888,7 @@ static void nilfs_btree_split(struct nilfs_btree *btree,
 		*keyp = nilfs_btree_node_get_key(btree, right, 0);
 		*ptrp = path[level].bp_newreq.bpr_ptr;
 
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+		brelse(path[level].bp_sib_bh);
 		path[level].bp_sib_bh = NULL;
 	}
 
@@ -897,12 +995,12 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 	level = NILFS_BTREE_LEVEL_DATA;
 
 	/* allocate a new ptr for data block */
-	if (btree->bt_ops->btop_find_target != NULL)
+	if (NILFS_BMAP_USE_VBN(&btree->bt_bmap))
 		path[level].bp_newreq.bpr_ptr =
-			btree->bt_ops->btop_find_target(btree, path, key);
+			nilfs_btree_find_target_v(btree, path, key);
 
-	ret = btree->bt_bmap.b_pops->bpop_prepare_alloc_ptr(
-		&btree->bt_bmap, &path[level].bp_newreq);
+	ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
+					   &path[level].bp_newreq);
 	if (ret < 0)
 		goto err_out_data;
 
@@ -924,8 +1022,7 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 		if (pindex > 0) {
 			sibptr = nilfs_btree_node_get_ptr(btree, parent,
 							  pindex - 1);
-			ret = nilfs_bmap_get_block(&btree->bt_bmap, sibptr,
-						   &bh);
+			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_child_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
@@ -936,7 +1033,7 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 				stats->bs_nblocks++;
 				goto out;
 			} else
-				nilfs_bmap_put_block(&btree->bt_bmap, bh);
+				brelse(bh);
 		}
 
 		/* right sibling */
@@ -944,8 +1041,7 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 		    nilfs_btree_node_get_nchildren(btree, parent) - 1) {
 			sibptr = nilfs_btree_node_get_ptr(btree, parent,
 							  pindex + 1);
-			ret = nilfs_bmap_get_block(&btree->bt_bmap, sibptr,
-						   &bh);
+			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_child_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
@@ -956,19 +1052,19 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 				stats->bs_nblocks++;
 				goto out;
 			} else
-				nilfs_bmap_put_block(&btree->bt_bmap, bh);
+				brelse(bh);
 		}
 
 		/* split */
 		path[level].bp_newreq.bpr_ptr =
 			path[level - 1].bp_newreq.bpr_ptr + 1;
-		ret = btree->bt_bmap.b_pops->bpop_prepare_alloc_ptr(
-			&btree->bt_bmap, &path[level].bp_newreq);
+		ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
+						   &path[level].bp_newreq);
 		if (ret < 0)
 			goto err_out_child_node;
-		ret = nilfs_bmap_get_new_block(&btree->bt_bmap,
-					       path[level].bp_newreq.bpr_ptr,
-					       &bh);
+		ret = nilfs_btree_get_new_block(btree,
+						path[level].bp_newreq.bpr_ptr,
+						&bh);
 		if (ret < 0)
 			goto err_out_curr_node;
 
@@ -994,12 +1090,12 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 
 	/* grow */
 	path[level].bp_newreq.bpr_ptr = path[level - 1].bp_newreq.bpr_ptr + 1;
-	ret = btree->bt_bmap.b_pops->bpop_prepare_alloc_ptr(
-		&btree->bt_bmap, &path[level].bp_newreq);
+	ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
+					   &path[level].bp_newreq);
 	if (ret < 0)
 		goto err_out_child_node;
-	ret = nilfs_bmap_get_new_block(&btree->bt_bmap,
-				       path[level].bp_newreq.bpr_ptr, &bh);
+	ret = nilfs_btree_get_new_block(btree, path[level].bp_newreq.bpr_ptr,
+					&bh);
 	if (ret < 0)
 		goto err_out_curr_node;
 
@@ -1023,18 +1119,16 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 
 	/* error */
  err_out_curr_node:
-	btree->bt_bmap.b_pops->bpop_abort_alloc_ptr(&btree->bt_bmap,
-						    &path[level].bp_newreq);
+	nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq);
  err_out_child_node:
 	for (level--; level > NILFS_BTREE_LEVEL_DATA; level--) {
-		nilfs_bmap_delete_block(&btree->bt_bmap, path[level].bp_sib_bh);
-		btree->bt_bmap.b_pops->bpop_abort_alloc_ptr(
-			&btree->bt_bmap, &path[level].bp_newreq);
+		nilfs_btnode_delete(path[level].bp_sib_bh);
+		nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap,
+					   &path[level].bp_newreq);
 
 	}
 
-	btree->bt_bmap.b_pops->bpop_abort_alloc_ptr(&btree->bt_bmap,
-						       &path[level].bp_newreq);
+	nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq);
  err_out_data:
 	*levelp = level;
 	stats->bs_nblocks = 0;
@@ -1049,14 +1143,12 @@ static void nilfs_btree_commit_insert(struct nilfs_btree *btree,
 
 	set_buffer_nilfs_volatile((struct buffer_head *)((unsigned long)ptr));
 	ptr = path[NILFS_BTREE_LEVEL_DATA].bp_newreq.bpr_ptr;
-	if (btree->bt_ops->btop_set_target != NULL)
-		btree->bt_ops->btop_set_target(btree, key, ptr);
+	if (NILFS_BMAP_USE_VBN(&btree->bt_bmap))
+		nilfs_btree_set_target_v(btree, key, ptr);
 
 	for (level = NILFS_BTREE_LEVEL_NODE_MIN; level <= maxlevel; level++) {
-		if (btree->bt_bmap.b_pops->bpop_commit_alloc_ptr != NULL) {
-			btree->bt_bmap.b_pops->bpop_commit_alloc_ptr(
-				&btree->bt_bmap, &path[level - 1].bp_newreq);
-		}
+		nilfs_bmap_commit_alloc_ptr(&btree->bt_bmap,
+					    &path[level - 1].bp_newreq);
 		path[level].bp_op(btree, path, level, &key, &ptr);
 	}
 
@@ -1153,7 +1245,7 @@ static void nilfs_btree_borrow_left(struct nilfs_btree *btree,
 	nilfs_btree_promote_key(btree, path, level + 1,
 				nilfs_btree_node_get_key(btree, node, 0));
 
-	nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+	brelse(path[level].bp_sib_bh);
 	path[level].bp_sib_bh = NULL;
 	path[level].bp_index += n;
 }
@@ -1192,7 +1284,7 @@ static void nilfs_btree_borrow_right(struct nilfs_btree *btree,
 				nilfs_btree_node_get_key(btree, right, 0));
 	path[level + 1].bp_index--;
 
-	nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
+	brelse(path[level].bp_sib_bh);
 	path[level].bp_sib_bh = NULL;
 }
 
@@ -1221,7 +1313,7 @@ static void nilfs_btree_concat_left(struct nilfs_btree *btree,
 	unlock_buffer(path[level].bp_bh);
 	unlock_buffer(path[level].bp_sib_bh);
 
-	nilfs_bmap_delete_block(&btree->bt_bmap, path[level].bp_bh);
+	nilfs_btnode_delete(path[level].bp_bh);
 	path[level].bp_bh = path[level].bp_sib_bh;
 	path[level].bp_sib_bh = NULL;
 	path[level].bp_index += nilfs_btree_node_get_nchildren(btree, left);
@@ -1252,7 +1344,7 @@ static void nilfs_btree_concat_right(struct nilfs_btree *btree,
 	unlock_buffer(path[level].bp_bh);
 	unlock_buffer(path[level].bp_sib_bh);
 
-	nilfs_bmap_delete_block(&btree->bt_bmap, path[level].bp_sib_bh);
+	nilfs_btnode_delete(path[level].bp_sib_bh);
 	path[level].bp_sib_bh = NULL;
 	path[level + 1].bp_index++;
 }
@@ -1276,7 +1368,7 @@ static void nilfs_btree_shrink(struct nilfs_btree *btree,
 	nilfs_btree_node_move_left(btree, root, child, n);
 	unlock_buffer(path[level].bp_bh);
 
-	nilfs_bmap_delete_block(&btree->bt_bmap, path[level].bp_bh);
+	nilfs_btnode_delete(path[level].bp_bh);
 	path[level].bp_bh = NULL;
 }
 
@@ -1300,12 +1392,10 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 		path[level].bp_oldreq.bpr_ptr =
 			nilfs_btree_node_get_ptr(btree, node,
 						 path[level].bp_index);
-		if (btree->bt_bmap.b_pops->bpop_prepare_end_ptr != NULL) {
-			ret = btree->bt_bmap.b_pops->bpop_prepare_end_ptr(
-				&btree->bt_bmap, &path[level].bp_oldreq);
-			if (ret < 0)
-				goto err_out_child_node;
-		}
+		ret = nilfs_bmap_prepare_end_ptr(&btree->bt_bmap,
+						 &path[level].bp_oldreq);
+		if (ret < 0)
+			goto err_out_child_node;
 
 		if (nilfs_btree_node_get_nchildren(btree, node) >
 		    nilfs_btree_node_nchildren_min(btree, node)) {
@@ -1321,8 +1411,7 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 			/* left sibling */
 			sibptr = nilfs_btree_node_get_ptr(btree, parent,
 							  pindex - 1);
-			ret = nilfs_bmap_get_block(&btree->bt_bmap, sibptr,
-						   &bh);
+			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_curr_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
@@ -1343,8 +1432,7 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 			/* right sibling */
 			sibptr = nilfs_btree_node_get_ptr(btree, parent,
 							  pindex + 1);
-			ret = nilfs_bmap_get_block(&btree->bt_bmap, sibptr,
-						   &bh);
+			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_curr_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
@@ -1381,12 +1469,12 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 	node = nilfs_btree_get_root(btree);
 	path[level].bp_oldreq.bpr_ptr =
 		nilfs_btree_node_get_ptr(btree, node, path[level].bp_index);
-	if (btree->bt_bmap.b_pops->bpop_prepare_end_ptr != NULL) {
-		ret = btree->bt_bmap.b_pops->bpop_prepare_end_ptr(
-			&btree->bt_bmap, &path[level].bp_oldreq);
-		if (ret < 0)
-			goto err_out_child_node;
-	}
+
+	ret = nilfs_bmap_prepare_end_ptr(&btree->bt_bmap,
+					 &path[level].bp_oldreq);
+	if (ret < 0)
+		goto err_out_child_node;
+
 	/* child of the root node is deleted */
 	path[level].bp_op = nilfs_btree_do_delete;
 	stats->bs_nblocks++;
@@ -1398,15 +1486,12 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 
 	/* error */
  err_out_curr_node:
-	if (btree->bt_bmap.b_pops->bpop_abort_end_ptr != NULL)
-		btree->bt_bmap.b_pops->bpop_abort_end_ptr(
-			&btree->bt_bmap, &path[level].bp_oldreq);
+	nilfs_bmap_abort_end_ptr(&btree->bt_bmap, &path[level].bp_oldreq);
  err_out_child_node:
 	for (level--; level >= NILFS_BTREE_LEVEL_NODE_MIN; level--) {
-		nilfs_bmap_put_block(&btree->bt_bmap, path[level].bp_sib_bh);
-		if (btree->bt_bmap.b_pops->bpop_abort_end_ptr != NULL)
-			btree->bt_bmap.b_pops->bpop_abort_end_ptr(
-				&btree->bt_bmap, &path[level].bp_oldreq);
+		brelse(path[level].bp_sib_bh);
+		nilfs_bmap_abort_end_ptr(&btree->bt_bmap,
+					 &path[level].bp_oldreq);
 	}
 	*levelp = level;
 	stats->bs_nblocks = 0;
@@ -1420,9 +1505,8 @@ static void nilfs_btree_commit_delete(struct nilfs_btree *btree,
 	int level;
 
 	for (level = NILFS_BTREE_LEVEL_NODE_MIN; level <= maxlevel; level++) {
-		if (btree->bt_bmap.b_pops->bpop_commit_end_ptr != NULL)
-			btree->bt_bmap.b_pops->bpop_commit_end_ptr(
-				&btree->bt_bmap, &path[level].bp_oldreq);
+		nilfs_bmap_commit_end_ptr(&btree->bt_bmap,
+					  &path[level].bp_oldreq);
 		path[level].bp_op(btree, path, level, NULL, NULL);
 	}
 
@@ -1501,7 +1585,7 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *bmap, __u64 key)
 		if (nchildren > 1)
 			return 0;
 		ptr = nilfs_btree_node_get_ptr(btree, root, nchildren - 1);
-		ret = nilfs_bmap_get_block(bmap, ptr, &bh);
+		ret = nilfs_btree_get_block(btree, ptr, &bh);
 		if (ret < 0)
 			return ret;
 		node = (struct nilfs_btree_node *)bh->b_data;
@@ -1515,9 +1599,9 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *bmap, __u64 key)
 	nextmaxkey = (nchildren > 1) ?
 		nilfs_btree_node_get_key(btree, node, nchildren - 2) : 0;
 	if (bh != NULL)
-		nilfs_bmap_put_block(bmap, bh);
+		brelse(bh);
 
-	return (maxkey == key) && (nextmaxkey < bmap->b_low);
+	return (maxkey == key) && (nextmaxkey < NILFS_BMAP_LARGE_LOW);
 }
 
 static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
@@ -1542,7 +1626,7 @@ static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
 		nchildren = nilfs_btree_node_get_nchildren(btree, root);
 		WARN_ON(nchildren > 1);
 		ptr = nilfs_btree_node_get_ptr(btree, root, nchildren - 1);
-		ret = nilfs_bmap_get_block(bmap, ptr, &bh);
+		ret = nilfs_btree_get_block(btree, ptr, &bh);
 		if (ret < 0)
 			return ret;
 		node = (struct nilfs_btree_node *)bh->b_data;
@@ -1563,7 +1647,7 @@ static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
 	}
 
 	if (bh != NULL)
-		nilfs_bmap_put_block(bmap, bh);
+		brelse(bh);
 
 	return nitems;
 }
@@ -1584,10 +1668,10 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 
 	/* for data */
 	/* cannot find near ptr */
-	if (btree->bt_ops->btop_find_target != NULL)
-		dreq->bpr_ptr
-			= btree->bt_ops->btop_find_target(btree, NULL, key);
-	ret = bmap->b_pops->bpop_prepare_alloc_ptr(bmap, dreq);
+	if (NILFS_BMAP_USE_VBN(bmap))
+		dreq->bpr_ptr = nilfs_btree_find_target_v(btree, NULL, key);
+
+	ret = nilfs_bmap_prepare_alloc_ptr(bmap, dreq);
 	if (ret < 0)
 		return ret;
 
@@ -1595,11 +1679,11 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 	stats->bs_nblocks++;
 	if (nreq != NULL) {
 		nreq->bpr_ptr = dreq->bpr_ptr + 1;
-		ret = bmap->b_pops->bpop_prepare_alloc_ptr(bmap, nreq);
+		ret = nilfs_bmap_prepare_alloc_ptr(bmap, nreq);
 		if (ret < 0)
 			goto err_out_dreq;
 
-		ret = nilfs_bmap_get_new_block(bmap, nreq->bpr_ptr, &bh);
+		ret = nilfs_btree_get_new_block(btree, nreq->bpr_ptr, &bh);
 		if (ret < 0)
 			goto err_out_nreq;
 
@@ -1612,9 +1696,9 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 
 	/* error */
  err_out_nreq:
-	bmap->b_pops->bpop_abort_alloc_ptr(bmap, nreq);
+	nilfs_bmap_abort_alloc_ptr(bmap, nreq);
  err_out_dreq:
-	bmap->b_pops->bpop_abort_alloc_ptr(bmap, dreq);
+	nilfs_bmap_abort_alloc_ptr(bmap, dreq);
 	stats->bs_nblocks = 0;
 	return ret;
 
@@ -1624,7 +1708,7 @@ static void
 nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 				      __u64 key, __u64 ptr,
 				      const __u64 *keys, const __u64 *ptrs,
-				      int n, __u64 low, __u64 high,
+				      int n,
 				      union nilfs_bmap_ptr_req *dreq,
 				      union nilfs_bmap_ptr_req *nreq,
 				      struct buffer_head *bh)
@@ -1642,12 +1726,10 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 
 	/* convert and insert */
 	btree = (struct nilfs_btree *)bmap;
-	nilfs_btree_init(bmap, low, high);
+	nilfs_btree_init(bmap);
 	if (nreq != NULL) {
-		if (bmap->b_pops->bpop_commit_alloc_ptr != NULL) {
-			bmap->b_pops->bpop_commit_alloc_ptr(bmap, dreq);
-			bmap->b_pops->bpop_commit_alloc_ptr(bmap, nreq);
-		}
+		nilfs_bmap_commit_alloc_ptr(bmap, dreq);
+		nilfs_bmap_commit_alloc_ptr(bmap, nreq);
 
 		/* create child node at level 1 */
 		lock_buffer(bh);
@@ -1661,7 +1743,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 			nilfs_bmap_set_dirty(bmap);
 
 		unlock_buffer(bh);
-		nilfs_bmap_put_block(bmap, bh);
+		brelse(bh);
 
 		/* create root node at level 2 */
 		node = nilfs_btree_get_root(btree);
@@ -1669,8 +1751,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 		nilfs_btree_node_init(btree, node, NILFS_BTREE_NODE_ROOT,
 				      2, 1, &keys[0], &tmpptr);
 	} else {
-		if (bmap->b_pops->bpop_commit_alloc_ptr != NULL)
-			bmap->b_pops->bpop_commit_alloc_ptr(bmap, dreq);
+		nilfs_bmap_commit_alloc_ptr(bmap, dreq);
 
 		/* create root node at level 1 */
 		node = nilfs_btree_get_root(btree);
@@ -1682,8 +1763,8 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 			nilfs_bmap_set_dirty(bmap);
 	}
 
-	if (btree->bt_ops->btop_set_target != NULL)
-		btree->bt_ops->btop_set_target(btree, key, dreq->bpr_ptr);
+	if (NILFS_BMAP_USE_VBN(bmap))
+		nilfs_btree_set_target_v(btree, key, dreq->bpr_ptr);
 }
 
 /**
@@ -1694,13 +1775,10 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
  * @keys:
  * @ptrs:
  * @n:
- * @low:
- * @high:
  */
 int nilfs_btree_convert_and_insert(struct nilfs_bmap *bmap,
 				   __u64 key, __u64 ptr,
-				   const __u64 *keys, const __u64 *ptrs,
-				   int n, __u64 low, __u64 high)
+				   const __u64 *keys, const __u64 *ptrs, int n)
 {
 	struct buffer_head *bh;
 	union nilfs_bmap_ptr_req dreq, nreq, *di, *ni;
@@ -1725,7 +1803,7 @@ int nilfs_btree_convert_and_insert(struct nilfs_bmap *bmap,
 	if (ret < 0)
 		return ret;
 	nilfs_btree_commit_convert_and_insert(bmap, key, ptr, keys, ptrs, n,
-					      low, high, di, ni, bh);
+					      di, ni, bh);
 	nilfs_bmap_add_blocks(bmap, stats.bs_nblocks);
 	return 0;
 }
@@ -1754,9 +1832,9 @@ static int nilfs_btree_prepare_update_v(struct nilfs_btree *btree,
 		nilfs_btree_node_get_ptr(btree, parent,
 					 path[level + 1].bp_index);
 	path[level].bp_newreq.bpr_ptr = path[level].bp_oldreq.bpr_ptr + 1;
-	ret = nilfs_bmap_prepare_update(&btree->bt_bmap,
-					&path[level].bp_oldreq,
-					&path[level].bp_newreq);
+	ret = nilfs_bmap_prepare_update_v(&btree->bt_bmap,
+					  &path[level].bp_oldreq,
+					  &path[level].bp_newreq);
 	if (ret < 0)
 		return ret;
 
@@ -1768,9 +1846,9 @@ static int nilfs_btree_prepare_update_v(struct nilfs_btree *btree,
 			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
 			&path[level].bp_ctxt);
 		if (ret < 0) {
-			nilfs_bmap_abort_update(&btree->bt_bmap,
-						&path[level].bp_oldreq,
-						&path[level].bp_newreq);
+			nilfs_bmap_abort_update_v(&btree->bt_bmap,
+						  &path[level].bp_oldreq,
+						  &path[level].bp_newreq);
 			return ret;
 		}
 	}
@@ -1784,9 +1862,9 @@ static void nilfs_btree_commit_update_v(struct nilfs_btree *btree,
 {
 	struct nilfs_btree_node *parent;
 
-	nilfs_bmap_commit_update(&btree->bt_bmap,
-				 &path[level].bp_oldreq,
-				 &path[level].bp_newreq);
+	nilfs_bmap_commit_update_v(&btree->bt_bmap,
+				   &path[level].bp_oldreq,
+				   &path[level].bp_newreq);
 
 	if (buffer_nilfs_node(path[level].bp_bh)) {
 		nilfs_btnode_commit_change_key(
@@ -1805,9 +1883,9 @@ static void nilfs_btree_abort_update_v(struct nilfs_btree *btree,
 				       struct nilfs_btree_path *path,
 				       int level)
 {
-	nilfs_bmap_abort_update(&btree->bt_bmap,
-				&path[level].bp_oldreq,
-				&path[level].bp_newreq);
+	nilfs_bmap_abort_update_v(&btree->bt_bmap,
+				  &path[level].bp_oldreq,
+				  &path[level].bp_newreq);
 	if (buffer_nilfs_node(path[level].bp_bh))
 		nilfs_btnode_abort_change_key(
 			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
@@ -1930,7 +2008,9 @@ static int nilfs_btree_propagate(const struct nilfs_bmap *bmap,
 		goto out;
 	}
 
-	ret = btree->bt_ops->btop_propagate(btree, path, level, bh);
+	ret = NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_btree_propagate_v(btree, path, level, bh) :
+		nilfs_btree_propagate_p(btree, path, level, bh);
 
  out:
 	nilfs_btree_clear_path(btree, path);
@@ -2066,12 +2146,9 @@ static int nilfs_btree_assign_v(struct nilfs_btree *btree,
 	ptr = nilfs_btree_node_get_ptr(btree, parent,
 				       path[level + 1].bp_index);
 	req.bpr_ptr = ptr;
-	ret = btree->bt_bmap.b_pops->bpop_prepare_start_ptr(&btree->bt_bmap,
-							       &req);
-	if (ret < 0)
+	ret = nilfs_bmap_start_v(&btree->bt_bmap, &req, blocknr);
+	if (unlikely(ret < 0))
 		return ret;
-	btree->bt_bmap.b_pops->bpop_commit_start_ptr(&btree->bt_bmap,
-							&req, blocknr);
 
 	key = nilfs_btree_node_get_key(btree, parent,
 				       path[level + 1].bp_index);
@@ -2114,8 +2191,9 @@ static int nilfs_btree_assign(struct nilfs_bmap *bmap,
 		goto out;
 	}
 
-	ret = btree->bt_ops->btop_assign(btree, path, level, bh,
-					    blocknr, binfo);
+	ret = NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_btree_assign_v(btree, path, level, bh, blocknr, binfo) :
+		nilfs_btree_assign_p(btree, path, level, bh, blocknr, binfo);
 
  out:
 	nilfs_btree_clear_path(btree, path);
@@ -2171,7 +2249,7 @@ static int nilfs_btree_mark(struct nilfs_bmap *bmap, __u64 key, int level)
 		WARN_ON(ret == -ENOENT);
 		goto out;
 	}
-	ret = nilfs_bmap_get_block(&btree->bt_bmap, ptr, &bh);
+	ret = nilfs_btree_get_block(btree, ptr, &bh);
 	if (ret < 0) {
 		WARN_ON(ret == -ENOENT);
 		goto out;
@@ -2179,7 +2257,7 @@ static int nilfs_btree_mark(struct nilfs_bmap *bmap, __u64 key, int level)
 
 	if (!buffer_dirty(bh))
 		nilfs_btnode_mark_dirty(bh);
-	nilfs_bmap_put_block(&btree->bt_bmap, bh);
+	brelse(bh);
 	if (!nilfs_bmap_dirty(&btree->bt_bmap))
 		nilfs_bmap_set_dirty(&btree->bt_bmap);
 
@@ -2191,6 +2269,7 @@ static int nilfs_btree_mark(struct nilfs_bmap *bmap, __u64 key, int level)
 
 static const struct nilfs_bmap_operations nilfs_btree_ops = {
 	.bop_lookup		=	nilfs_btree_lookup,
+	.bop_lookup_contig	=	nilfs_btree_lookup_contig,
 	.bop_insert		=	nilfs_btree_insert,
 	.bop_delete		=	nilfs_btree_delete,
 	.bop_clear		=	NULL,
@@ -2210,6 +2289,7 @@ static const struct nilfs_bmap_operations nilfs_btree_ops = {
 
 static const struct nilfs_bmap_operations nilfs_btree_ops_gc = {
 	.bop_lookup		=	NULL,
+	.bop_lookup_contig	=	NULL,
 	.bop_insert		=	NULL,
 	.bop_delete		=	NULL,
 	.bop_clear		=	NULL,
@@ -2227,43 +2307,13 @@ static const struct nilfs_bmap_operations nilfs_btree_ops_gc = {
 	.bop_gather_data	=	NULL,
 };
 
-static const struct nilfs_btree_operations nilfs_btree_ops_v = {
-	.btop_find_target	=	nilfs_btree_find_target_v,
-	.btop_set_target	=	nilfs_btree_set_target_v,
-	.btop_propagate		=	nilfs_btree_propagate_v,
-	.btop_assign		=	nilfs_btree_assign_v,
-};
-
-static const struct nilfs_btree_operations nilfs_btree_ops_p = {
-	.btop_find_target	=	NULL,
-	.btop_set_target	=	NULL,
-	.btop_propagate		=	nilfs_btree_propagate_p,
-	.btop_assign		=	nilfs_btree_assign_p,
-};
-
-int nilfs_btree_init(struct nilfs_bmap *bmap, __u64 low, __u64 high)
+int nilfs_btree_init(struct nilfs_bmap *bmap)
 {
-	struct nilfs_btree *btree;
-
-	btree = (struct nilfs_btree *)bmap;
 	bmap->b_ops = &nilfs_btree_ops;
-	bmap->b_low = low;
-	bmap->b_high = high;
-	switch (bmap->b_inode->i_ino) {
-	case NILFS_DAT_INO:
-		btree->bt_ops = &nilfs_btree_ops_p;
-		break;
-	default:
-		btree->bt_ops = &nilfs_btree_ops_v;
-		break;
-	}
-
 	return 0;
 }
 
 void nilfs_btree_init_gc(struct nilfs_bmap *bmap)
 {
-	bmap->b_low = NILFS_BMAP_LARGE_LOW;
-	bmap->b_high = NILFS_BMAP_LARGE_HIGH;
 	bmap->b_ops = &nilfs_btree_ops_gc;
 }
diff --git a/fs/nilfs2/btree.h b/fs/nilfs2/btree.h
index 4766deb52fb..0e72bbbc6b6 100644
--- a/fs/nilfs2/btree.h
+++ b/fs/nilfs2/btree.h
@@ -34,28 +34,6 @@ struct nilfs_btree;
 struct nilfs_btree_path;
 
 /**
- * struct nilfs_btree_operations - B-tree operation table
- */
-struct nilfs_btree_operations {
-	__u64 (*btop_find_target)(const struct nilfs_btree *,
-				  const struct nilfs_btree_path *, __u64);
-	void (*btop_set_target)(struct nilfs_btree *, __u64, __u64);
-
-	struct the_nilfs *(*btop_get_nilfs)(struct nilfs_btree *);
-
-	int (*btop_propagate)(struct nilfs_btree *,
-			      struct nilfs_btree_path *,
-			      int,
-			      struct buffer_head *);
-	int (*btop_assign)(struct nilfs_btree *,
-			   struct nilfs_btree_path *,
-			   int,
-			   struct buffer_head **,
-			   sector_t,
-			   union nilfs_binfo *);
-};
-
-/**
  * struct nilfs_btree_node - B-tree node
  * @bn_flags: flags
  * @bn_level: level
@@ -80,13 +58,9 @@ struct nilfs_btree_node {
 /**
  * struct nilfs_btree - B-tree structure
  * @bt_bmap: bmap base structure
- * @bt_ops: B-tree operation table
  */
 struct nilfs_btree {
 	struct nilfs_bmap bt_bmap;
-
-	/* B-tree-specific members */
-	const struct nilfs_btree_operations *bt_ops;
 };
 
 
@@ -108,10 +82,9 @@ struct nilfs_btree {
 
 int nilfs_btree_path_cache_init(void);
 void nilfs_btree_path_cache_destroy(void);
-int nilfs_btree_init(struct nilfs_bmap *, __u64, __u64);
+int nilfs_btree_init(struct nilfs_bmap *);
 int nilfs_btree_convert_and_insert(struct nilfs_bmap *, __u64, __u64,
-				   const __u64 *, const __u64 *,
-				   int, __u64, __u64);
+				   const __u64 *, const __u64 *, int);
 void nilfs_btree_init_gc(struct nilfs_bmap *);
 
 #endif	/* _NILFS_BTREE_H */
diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c
index cadd36b14d0..7d49813f66d 100644
--- a/fs/nilfs2/cpfile.c
+++ b/fs/nilfs2/cpfile.c
@@ -295,10 +295,6 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile,
 		return -EINVAL;
 	}
 
-	/* cannot delete the latest checkpoint */
-	if (start == nilfs_mdt_cno(cpfile) - 1)
-		return -EPERM;
-
 	down_write(&NILFS_MDT(cpfile)->mi_sem);
 
 	ret = nilfs_cpfile_get_header_block(cpfile, &header_bh);
@@ -384,9 +380,10 @@ static void nilfs_cpfile_checkpoint_to_cpinfo(struct inode *cpfile,
 }
 
 static ssize_t nilfs_cpfile_do_get_cpinfo(struct inode *cpfile, __u64 *cnop,
-					  struct nilfs_cpinfo *ci, size_t nci)
+					  void *buf, unsigned cisz, size_t nci)
 {
 	struct nilfs_checkpoint *cp;
+	struct nilfs_cpinfo *ci = buf;
 	struct buffer_head *bh;
 	size_t cpsz = NILFS_MDT(cpfile)->mi_entry_size;
 	__u64 cur_cno = nilfs_mdt_cno(cpfile), cno = *cnop;
@@ -410,17 +407,22 @@ static ssize_t nilfs_cpfile_do_get_cpinfo(struct inode *cpfile, __u64 *cnop,
 		kaddr = kmap_atomic(bh->b_page, KM_USER0);
 		cp = nilfs_cpfile_block_get_checkpoint(cpfile, cno, bh, kaddr);
 		for (i = 0; i < ncps && n < nci; i++, cp = (void *)cp + cpsz) {
-			if (!nilfs_checkpoint_invalid(cp))
-				nilfs_cpfile_checkpoint_to_cpinfo(
-					cpfile, cp, &ci[n++]);
+			if (!nilfs_checkpoint_invalid(cp)) {
+				nilfs_cpfile_checkpoint_to_cpinfo(cpfile, cp,
+								  ci);
+				ci = (void *)ci + cisz;
+				n++;
+			}
 		}
 		kunmap_atomic(kaddr, KM_USER0);
 		brelse(bh);
 	}
 
 	ret = n;
-	if (n > 0)
-		*cnop = ci[n - 1].ci_cno + 1;
+	if (n > 0) {
+		ci = (void *)ci - cisz;
+		*cnop = ci->ci_cno + 1;
+	}
 
  out:
 	up_read(&NILFS_MDT(cpfile)->mi_sem);
@@ -428,11 +430,12 @@ static ssize_t nilfs_cpfile_do_get_cpinfo(struct inode *cpfile, __u64 *cnop,
 }
 
 static ssize_t nilfs_cpfile_do_get_ssinfo(struct inode *cpfile, __u64 *cnop,
-					  struct nilfs_cpinfo *ci, size_t nci)
+					  void *buf, unsigned cisz, size_t nci)
 {
 	struct buffer_head *bh;
 	struct nilfs_cpfile_header *header;
 	struct nilfs_checkpoint *cp;
+	struct nilfs_cpinfo *ci = buf;
 	__u64 curr = *cnop, next;
 	unsigned long curr_blkoff, next_blkoff;
 	void *kaddr;
@@ -472,7 +475,9 @@ static ssize_t nilfs_cpfile_do_get_ssinfo(struct inode *cpfile, __u64 *cnop,
 		if (unlikely(nilfs_checkpoint_invalid(cp) ||
 			     !nilfs_checkpoint_snapshot(cp)))
 			break;
-		nilfs_cpfile_checkpoint_to_cpinfo(cpfile, cp, &ci[n++]);
+		nilfs_cpfile_checkpoint_to_cpinfo(cpfile, cp, ci);
+		ci = (void *)ci + cisz;
+		n++;
 		next = le64_to_cpu(cp->cp_snapshot_list.ssl_next);
 		if (next == 0)
 			break; /* reach end of the snapshot list */
@@ -511,13 +516,13 @@ static ssize_t nilfs_cpfile_do_get_ssinfo(struct inode *cpfile, __u64 *cnop,
  */
 
 ssize_t nilfs_cpfile_get_cpinfo(struct inode *cpfile, __u64 *cnop, int mode,
-				struct nilfs_cpinfo *ci, size_t nci)
+				void *buf, unsigned cisz, size_t nci)
 {
 	switch (mode) {
 	case NILFS_CHECKPOINT:
-		return nilfs_cpfile_do_get_cpinfo(cpfile, cnop, ci, nci);
+		return nilfs_cpfile_do_get_cpinfo(cpfile, cnop, buf, cisz, nci);
 	case NILFS_SNAPSHOT:
-		return nilfs_cpfile_do_get_ssinfo(cpfile, cnop, ci, nci);
+		return nilfs_cpfile_do_get_ssinfo(cpfile, cnop, buf, cisz, nci);
 	default:
 		return -EINVAL;
 	}
@@ -533,20 +538,14 @@ int nilfs_cpfile_delete_checkpoint(struct inode *cpfile, __u64 cno)
 	struct nilfs_cpinfo ci;
 	__u64 tcno = cno;
 	ssize_t nci;
-	int ret;
 
-	nci = nilfs_cpfile_do_get_cpinfo(cpfile, &tcno, &ci, 1);
+	nci = nilfs_cpfile_do_get_cpinfo(cpfile, &tcno, &ci, sizeof(ci), 1);
 	if (nci < 0)
 		return nci;
 	else if (nci == 0 || ci.ci_cno != cno)
 		return -ENOENT;
-
-	/* cannot delete the latest checkpoint nor snapshots */
-	ret = nilfs_cpinfo_snapshot(&ci);
-	if (ret < 0)
-		return ret;
-	else if (ret > 0 || cno == nilfs_mdt_cno(cpfile) - 1)
-		return -EPERM;
+	else if (nilfs_cpinfo_snapshot(&ci))
+		return -EBUSY;
 
 	return nilfs_cpfile_delete_checkpoints(cpfile, cno, cno + 1);
 }
diff --git a/fs/nilfs2/cpfile.h b/fs/nilfs2/cpfile.h
index 1a8a1008c34..788a4595019 100644
--- a/fs/nilfs2/cpfile.h
+++ b/fs/nilfs2/cpfile.h
@@ -39,7 +39,7 @@ int nilfs_cpfile_delete_checkpoint(struct inode *, __u64);
 int nilfs_cpfile_change_cpmode(struct inode *, __u64, int);
 int nilfs_cpfile_is_snapshot(struct inode *, __u64);
 int nilfs_cpfile_get_stat(struct inode *, struct nilfs_cpstat *);
-ssize_t nilfs_cpfile_get_cpinfo(struct inode *, __u64 *, int,
-				struct nilfs_cpinfo *, size_t);
+ssize_t nilfs_cpfile_get_cpinfo(struct inode *, __u64 *, int, void *, unsigned,
+				size_t);
 
 #endif	/* _NILFS_CPFILE_H */
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index bb8a5818e7f..0b2710e2d56 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -92,21 +92,6 @@ void nilfs_dat_abort_alloc(struct inode *dat, struct nilfs_palloc_req *req)
 	nilfs_palloc_abort_alloc_entry(dat, req);
 }
 
-int nilfs_dat_prepare_free(struct inode *dat, struct nilfs_palloc_req *req)
-{
-	int ret;
-
-	ret = nilfs_palloc_prepare_free_entry(dat, req);
-	if (ret < 0)
-		return ret;
-	ret = nilfs_dat_prepare_entry(dat, req, 0);
-	if (ret < 0) {
-		nilfs_palloc_abort_free_entry(dat, req);
-		return ret;
-	}
-	return 0;
-}
-
 void nilfs_dat_commit_free(struct inode *dat, struct nilfs_palloc_req *req)
 {
 	struct nilfs_dat_entry *entry;
@@ -391,36 +376,37 @@ int nilfs_dat_translate(struct inode *dat, __u64 vblocknr, sector_t *blocknrp)
 	return ret;
 }
 
-ssize_t nilfs_dat_get_vinfo(struct inode *dat, struct nilfs_vinfo *vinfo,
+ssize_t nilfs_dat_get_vinfo(struct inode *dat, void *buf, unsigned visz,
 			    size_t nvi)
 {
 	struct buffer_head *entry_bh;
 	struct nilfs_dat_entry *entry;
+	struct nilfs_vinfo *vinfo = buf;
 	__u64 first, last;
 	void *kaddr;
 	unsigned long entries_per_block = NILFS_MDT(dat)->mi_entries_per_block;
 	int i, j, n, ret;
 
 	for (i = 0; i < nvi; i += n) {
-		ret = nilfs_palloc_get_entry_block(dat, vinfo[i].vi_vblocknr,
+		ret = nilfs_palloc_get_entry_block(dat, vinfo->vi_vblocknr,
 						   0, &entry_bh);
 		if (ret < 0)
 			return ret;
 		kaddr = kmap_atomic(entry_bh->b_page, KM_USER0);
 		/* last virtual block number in this block */
-		first = vinfo[i].vi_vblocknr;
+		first = vinfo->vi_vblocknr;
 		do_div(first, entries_per_block);
 		first *= entries_per_block;
 		last = first + entries_per_block - 1;
 		for (j = i, n = 0;
-		     j < nvi && vinfo[j].vi_vblocknr >= first &&
-			     vinfo[j].vi_vblocknr <= last;
-		     j++, n++) {
+		     j < nvi && vinfo->vi_vblocknr >= first &&
+			     vinfo->vi_vblocknr <= last;
+		     j++, n++, vinfo = (void *)vinfo + visz) {
 			entry = nilfs_palloc_block_get_entry(
-				dat, vinfo[j].vi_vblocknr, entry_bh, kaddr);
-			vinfo[j].vi_start = le64_to_cpu(entry->de_start);
-			vinfo[j].vi_end = le64_to_cpu(entry->de_end);
-			vinfo[j].vi_blocknr = le64_to_cpu(entry->de_blocknr);
+				dat, vinfo->vi_vblocknr, entry_bh, kaddr);
+			vinfo->vi_start = le64_to_cpu(entry->de_start);
+			vinfo->vi_end = le64_to_cpu(entry->de_end);
+			vinfo->vi_blocknr = le64_to_cpu(entry->de_blocknr);
 		}
 		kunmap_atomic(kaddr, KM_USER0);
 		brelse(entry_bh);
diff --git a/fs/nilfs2/dat.h b/fs/nilfs2/dat.h
index d9560654a4b..d328b81eead 100644
--- a/fs/nilfs2/dat.h
+++ b/fs/nilfs2/dat.h
@@ -47,6 +47,6 @@ void nilfs_dat_abort_end(struct inode *, struct nilfs_palloc_req *);
 int nilfs_dat_mark_dirty(struct inode *, __u64);
 int nilfs_dat_freev(struct inode *, __u64 *, size_t);
 int nilfs_dat_move(struct inode *, __u64, sector_t);
-ssize_t nilfs_dat_get_vinfo(struct inode *, struct nilfs_vinfo *, size_t);
+ssize_t nilfs_dat_get_vinfo(struct inode *, void *, unsigned, size_t);
 
 #endif	/* _NILFS_DAT_H */
diff --git a/fs/nilfs2/direct.c b/fs/nilfs2/direct.c
index c6379e48278..342d9765df8 100644
--- a/fs/nilfs2/direct.c
+++ b/fs/nilfs2/direct.c
@@ -25,6 +25,7 @@
 #include "page.h"
 #include "direct.h"
 #include "alloc.h"
+#include "dat.h"
 
 static inline __le64 *nilfs_direct_dptrs(const struct nilfs_direct *direct)
 {
@@ -62,6 +63,47 @@ static int nilfs_direct_lookup(const struct nilfs_bmap *bmap,
 	return 0;
 }
 
+static int nilfs_direct_lookup_contig(const struct nilfs_bmap *bmap,
+				      __u64 key, __u64 *ptrp,
+				      unsigned maxblocks)
+{
+	struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
+	struct inode *dat = NULL;
+	__u64 ptr, ptr2;
+	sector_t blocknr;
+	int ret, cnt;
+
+	if (key > NILFS_DIRECT_KEY_MAX ||
+	    (ptr = nilfs_direct_get_ptr(direct, key)) ==
+	    NILFS_BMAP_INVALID_PTR)
+		return -ENOENT;
+
+	if (NILFS_BMAP_USE_VBN(bmap)) {
+		dat = nilfs_bmap_get_dat(bmap);
+		ret = nilfs_dat_translate(dat, ptr, &blocknr);
+		if (ret < 0)
+			return ret;
+		ptr = blocknr;
+	}
+
+	maxblocks = min_t(unsigned, maxblocks, NILFS_DIRECT_KEY_MAX - key + 1);
+	for (cnt = 1; cnt < maxblocks &&
+		     (ptr2 = nilfs_direct_get_ptr(direct, key + cnt)) !=
+		     NILFS_BMAP_INVALID_PTR;
+	     cnt++) {
+		if (dat) {
+			ret = nilfs_dat_translate(dat, ptr2, &blocknr);
+			if (ret < 0)
+				return ret;
+			ptr2 = blocknr;
+		}
+		if (ptr2 != ptr + cnt)
+			break;
+	}
+	*ptrp = ptr;
+	return cnt;
+}
+
 static __u64
 nilfs_direct_find_target_v(const struct nilfs_direct *direct, __u64 key)
 {
@@ -90,10 +132,9 @@ static int nilfs_direct_prepare_insert(struct nilfs_direct *direct,
 {
 	int ret;
 
-	if (direct->d_ops->dop_find_target != NULL)
-		req->bpr_ptr = direct->d_ops->dop_find_target(direct, key);
-	ret = direct->d_bmap.b_pops->bpop_prepare_alloc_ptr(&direct->d_bmap,
-							       req);
+	if (NILFS_BMAP_USE_VBN(&direct->d_bmap))
+		req->bpr_ptr = nilfs_direct_find_target_v(direct, key);
+	ret = nilfs_bmap_prepare_alloc_ptr(&direct->d_bmap, req);
 	if (ret < 0)
 		return ret;
 
@@ -111,16 +152,14 @@ static void nilfs_direct_commit_insert(struct nilfs_direct *direct,
 	bh = (struct buffer_head *)((unsigned long)ptr);
 	set_buffer_nilfs_volatile(bh);
 
-	if (direct->d_bmap.b_pops->bpop_commit_alloc_ptr != NULL)
-		direct->d_bmap.b_pops->bpop_commit_alloc_ptr(
-			&direct->d_bmap, req);
+	nilfs_bmap_commit_alloc_ptr(&direct->d_bmap, req);
 	nilfs_direct_set_ptr(direct, key, req->bpr_ptr);
 
 	if (!nilfs_bmap_dirty(&direct->d_bmap))
 		nilfs_bmap_set_dirty(&direct->d_bmap);
 
-	if (direct->d_ops->dop_set_target != NULL)
-		direct->d_ops->dop_set_target(direct, key, req->bpr_ptr);
+	if (NILFS_BMAP_USE_VBN(&direct->d_bmap))
+		nilfs_direct_set_target_v(direct, key, req->bpr_ptr);
 }
 
 static int nilfs_direct_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
@@ -152,25 +191,18 @@ static int nilfs_direct_prepare_delete(struct nilfs_direct *direct,
 {
 	int ret;
 
-	if (direct->d_bmap.b_pops->bpop_prepare_end_ptr != NULL) {
-		req->bpr_ptr = nilfs_direct_get_ptr(direct, key);
-		ret = direct->d_bmap.b_pops->bpop_prepare_end_ptr(
-			&direct->d_bmap, req);
-		if (ret < 0)
-			return ret;
-	}
-
-	stats->bs_nblocks = 1;
-	return 0;
+	req->bpr_ptr = nilfs_direct_get_ptr(direct, key);
+	ret = nilfs_bmap_prepare_end_ptr(&direct->d_bmap, req);
+	if (!ret)
+		stats->bs_nblocks = 1;
+	return ret;
 }
 
 static void nilfs_direct_commit_delete(struct nilfs_direct *direct,
 				       union nilfs_bmap_ptr_req *req,
 				       __u64 key)
 {
-	if (direct->d_bmap.b_pops->bpop_commit_end_ptr != NULL)
-		direct->d_bmap.b_pops->bpop_commit_end_ptr(
-			&direct->d_bmap, req);
+	nilfs_bmap_commit_end_ptr(&direct->d_bmap, req);
 	nilfs_direct_set_ptr(direct, key, NILFS_BMAP_INVALID_PTR);
 }
 
@@ -244,8 +276,7 @@ static int nilfs_direct_gather_data(struct nilfs_bmap *bmap,
 }
 
 int nilfs_direct_delete_and_convert(struct nilfs_bmap *bmap,
-				    __u64 key, __u64 *keys, __u64 *ptrs,
-				    int n, __u64 low, __u64 high)
+				    __u64 key, __u64 *keys, __u64 *ptrs, int n)
 {
 	struct nilfs_direct *direct;
 	__le64 *dptrs;
@@ -275,8 +306,7 @@ int nilfs_direct_delete_and_convert(struct nilfs_bmap *bmap,
 			dptrs[i] = NILFS_BMAP_INVALID_PTR;
 	}
 
-	nilfs_direct_init(bmap, low, high);
-
+	nilfs_direct_init(bmap);
 	return 0;
 }
 
@@ -293,11 +323,11 @@ static int nilfs_direct_propagate_v(struct nilfs_direct *direct,
 	if (!buffer_nilfs_volatile(bh)) {
 		oldreq.bpr_ptr = ptr;
 		newreq.bpr_ptr = ptr;
-		ret = nilfs_bmap_prepare_update(&direct->d_bmap, &oldreq,
-						&newreq);
+		ret = nilfs_bmap_prepare_update_v(&direct->d_bmap, &oldreq,
+						  &newreq);
 		if (ret < 0)
 			return ret;
-		nilfs_bmap_commit_update(&direct->d_bmap, &oldreq, &newreq);
+		nilfs_bmap_commit_update_v(&direct->d_bmap, &oldreq, &newreq);
 		set_buffer_nilfs_volatile(bh);
 		nilfs_direct_set_ptr(direct, key, newreq.bpr_ptr);
 	} else
@@ -309,12 +339,10 @@ static int nilfs_direct_propagate_v(struct nilfs_direct *direct,
 static int nilfs_direct_propagate(const struct nilfs_bmap *bmap,
 				  struct buffer_head *bh)
 {
-	struct nilfs_direct *direct;
+	struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
 
-	direct = (struct nilfs_direct *)bmap;
-	return (direct->d_ops->dop_propagate != NULL) ?
-		direct->d_ops->dop_propagate(direct, bh) :
-		0;
+	return NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_direct_propagate_v(direct, bh) : 0;
 }
 
 static int nilfs_direct_assign_v(struct nilfs_direct *direct,
@@ -327,12 +355,9 @@ static int nilfs_direct_assign_v(struct nilfs_direct *direct,
 	int ret;
 
 	req.bpr_ptr = ptr;
-	ret = direct->d_bmap.b_pops->bpop_prepare_start_ptr(
-		&direct->d_bmap, &req);
-	if (ret < 0)
+	ret = nilfs_bmap_start_v(&direct->d_bmap, &req, blocknr);
+	if (unlikely(ret < 0))
 		return ret;
-	direct->d_bmap.b_pops->bpop_commit_start_ptr(&direct->d_bmap,
-						     &req, blocknr);
 
 	binfo->bi_v.bi_vblocknr = nilfs_bmap_ptr_to_dptr(ptr);
 	binfo->bi_v.bi_blkoff = nilfs_bmap_key_to_dkey(key);
@@ -377,12 +402,14 @@ static int nilfs_direct_assign(struct nilfs_bmap *bmap,
 		return -EINVAL;
 	}
 
-	return direct->d_ops->dop_assign(direct, key, ptr, bh,
-					 blocknr, binfo);
+	return NILFS_BMAP_USE_VBN(bmap) ?
+		nilfs_direct_assign_v(direct, key, ptr, bh, blocknr, binfo) :
+		nilfs_direct_assign_p(direct, key, ptr, bh, blocknr, binfo);
 }
 
 static const struct nilfs_bmap_operations nilfs_direct_ops = {
 	.bop_lookup		=	nilfs_direct_lookup,
+	.bop_lookup_contig	=	nilfs_direct_lookup_contig,
 	.bop_insert		=	nilfs_direct_insert,
 	.bop_delete		=	nilfs_direct_delete,
 	.bop_clear		=	NULL,
@@ -401,36 +428,8 @@ static const struct nilfs_bmap_operations nilfs_direct_ops = {
 };
 
 
-static const struct nilfs_direct_operations nilfs_direct_ops_v = {
-	.dop_find_target	=	nilfs_direct_find_target_v,
-	.dop_set_target		=	nilfs_direct_set_target_v,
-	.dop_propagate		=	nilfs_direct_propagate_v,
-	.dop_assign		=	nilfs_direct_assign_v,
-};
-
-static const struct nilfs_direct_operations nilfs_direct_ops_p = {
-	.dop_find_target	=	NULL,
-	.dop_set_target		=	NULL,
-	.dop_propagate		=	NULL,
-	.dop_assign		=	nilfs_direct_assign_p,
-};
-
-int nilfs_direct_init(struct nilfs_bmap *bmap, __u64 low, __u64 high)
+int nilfs_direct_init(struct nilfs_bmap *bmap)
 {
-	struct nilfs_direct *direct;
-
-	direct = (struct nilfs_direct *)bmap;
 	bmap->b_ops = &nilfs_direct_ops;
-	bmap->b_low = low;
-	bmap->b_high = high;
-	switch (bmap->b_inode->i_ino) {
-	case NILFS_DAT_INO:
-		direct->d_ops = &nilfs_direct_ops_p;
-		break;
-	default:
-		direct->d_ops = &nilfs_direct_ops_v;
-		break;
-	}
-
 	return 0;
 }
diff --git a/fs/nilfs2/direct.h b/fs/nilfs2/direct.h
index 45d2c5cda81..a5ffd66e25d 100644
--- a/fs/nilfs2/direct.h
+++ b/fs/nilfs2/direct.h
@@ -31,18 +31,6 @@
 struct nilfs_direct;
 
 /**
- * struct nilfs_direct_operations - direct mapping operation table
- */
-struct nilfs_direct_operations {
-	__u64 (*dop_find_target)(const struct nilfs_direct *, __u64);
-	void (*dop_set_target)(struct nilfs_direct *, __u64, __u64);
-	int (*dop_propagate)(struct nilfs_direct *, struct buffer_head *);
-	int (*dop_assign)(struct nilfs_direct *, __u64, __u64,
-			  struct buffer_head **, sector_t,
-			  union nilfs_binfo *);
-};
-
-/**
  * struct nilfs_direct_node - direct node
  * @dn_flags: flags
  * @dn_pad: padding
@@ -55,13 +43,9 @@ struct nilfs_direct_node {
 /**
  * struct nilfs_direct - direct mapping
  * @d_bmap: bmap structure
- * @d_ops: direct mapping operation table
  */
 struct nilfs_direct {
 	struct nilfs_bmap d_bmap;
-
-	/* direct-mapping-specific members */
-	const struct nilfs_direct_operations *d_ops;
 };
 
 
@@ -70,9 +54,9 @@ struct nilfs_direct {
 #define NILFS_DIRECT_KEY_MAX	(NILFS_DIRECT_NBLOCKS - 1)
 
 
-int nilfs_direct_init(struct nilfs_bmap *, __u64, __u64);
+int nilfs_direct_init(struct nilfs_bmap *);
 int nilfs_direct_delete_and_convert(struct nilfs_bmap *, __u64, __u64 *,
-				    __u64 *, int, __u64, __u64);
+				    __u64 *, int);
 
 
 #endif	/* _NILFS_DIRECT_H */
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 19d2102b6a6..1b3c2bb20da 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -52,8 +52,9 @@
 #include "dat.h"
 #include "ifile.h"
 
-static struct address_space_operations def_gcinode_aops = {};
-/* XXX need def_gcinode_iops/fops? */
+static struct address_space_operations def_gcinode_aops = {
+	.sync_page		= block_sync_page,
+};
 
 /*
  * nilfs_gccache_submit_read_data() - add data buffer and submit read request
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 49ab4a49bb4..2696d6b513b 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -43,22 +43,23 @@
  *
  * This function does not issue actual read request of the specified data
  * block. It is done by VFS.
- * Bulk read for direct-io is not supported yet. (should be supported)
  */
 int nilfs_get_block(struct inode *inode, sector_t blkoff,
 		    struct buffer_head *bh_result, int create)
 {
 	struct nilfs_inode_info *ii = NILFS_I(inode);
-	unsigned long blknum = 0;
+	__u64 blknum = 0;
 	int err = 0, ret;
 	struct inode *dat = nilfs_dat_inode(NILFS_I_NILFS(inode));
+	unsigned maxblocks = bh_result->b_size >> inode->i_blkbits;
 
-	/* This exclusion control is a workaround; should be revised */
-	down_read(&NILFS_MDT(dat)->mi_sem);	/* XXX */
-	ret = nilfs_bmap_lookup(ii->i_bmap, (unsigned long)blkoff, &blknum);
-	up_read(&NILFS_MDT(dat)->mi_sem);	/* XXX */
-	if (ret == 0) {	/* found */
+	down_read(&NILFS_MDT(dat)->mi_sem);
+	ret = nilfs_bmap_lookup_contig(ii->i_bmap, blkoff, &blknum, maxblocks);
+	up_read(&NILFS_MDT(dat)->mi_sem);
+	if (ret >= 0) {	/* found */
 		map_bh(bh_result, inode->i_sb, blknum);
+		if (ret > 0)
+			bh_result->b_size = (ret << inode->i_blkbits);
 		goto out;
 	}
 	/* data block was not found */
@@ -240,7 +241,7 @@ nilfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
 struct address_space_operations nilfs_aops = {
 	.writepage		= nilfs_writepage,
 	.readpage		= nilfs_readpage,
-	/* .sync_page		= nilfs_sync_page, */
+	.sync_page		= block_sync_page,
 	.writepages		= nilfs_writepages,
 	.set_page_dirty		= nilfs_set_page_dirty,
 	.readpages		= nilfs_readpages,
@@ -249,6 +250,7 @@ struct address_space_operations nilfs_aops = {
 	/* .releasepage		= nilfs_releasepage, */
 	.invalidatepage		= block_invalidatepage,
 	.direct_IO		= nilfs_direct_IO,
+	.is_partially_uptodate  = block_is_partially_uptodate,
 };
 
 struct inode *nilfs_new_inode(struct inode *dir, int mode)
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index d6759b92006..6ea5f872e2d 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -152,7 +152,7 @@ nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 
 	down_read(&nilfs->ns_segctor_sem);
 	ret = nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
-				      nmembs);
+				      size, nmembs);
 	up_read(&nilfs->ns_segctor_sem);
 	return ret;
 }
@@ -182,7 +182,8 @@ nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	int ret;
 
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
+	ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, size,
+				      nmembs);
 	up_read(&nilfs->ns_segctor_sem);
 	return ret;
 }
@@ -212,7 +213,7 @@ nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	int ret;
 
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
+	ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, size, nmembs);
 	up_read(&nilfs->ns_segctor_sem);
 	return ret;
 }
@@ -435,24 +436,6 @@ static int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
 	return nmembs;
 }
 
-static int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
-				     struct nilfs_argv *argv, void *buf)
-{
-	size_t nmembs = argv->v_nmembs;
-	struct nilfs_sb_info *sbi = nilfs->ns_writer;
-	int ret;
-
-	if (unlikely(!sbi)) {
-		/* never happens because called for a writable mount */
-		WARN_ON(1);
-		return -EROFS;
-	}
-	ret = nilfs_segctor_add_segments_to_be_freed(
-		NILFS_SC(sbi), buf, nmembs);
-
-	return (ret < 0) ? ret : nmembs;
-}
-
 int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 				       struct nilfs_argv *argv, void **kbufs)
 {
@@ -491,14 +474,6 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 		msg = "cannot mark copying blocks dirty";
 		goto failed;
 	}
-	ret = nilfs_ioctl_free_segments(nilfs, &argv[4], kbufs[4]);
-	if (ret < 0) {
-		/*
-		 * can safely abort because this operation is atomic.
-		 */
-		msg = "cannot set segments to be freed";
-		goto failed;
-	}
 	return 0;
 
  failed:
@@ -615,7 +590,7 @@ static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
 	if (copy_from_user(&argv, argp, sizeof(argv)))
 		return -EFAULT;
 
-	if (argv.v_size != membsz)
+	if (argv.v_size < membsz)
 		return -EINVAL;
 
 	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index bb78745a0e3..3d3ddb3f517 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -430,6 +430,7 @@ nilfs_mdt_write_page(struct page *page, struct writeback_control *wbc)
 
 static struct address_space_operations def_mdt_aops = {
 	.writepage		= nilfs_mdt_write_page,
+	.sync_page		= block_sync_page,
 };
 
 static struct inode_operations def_mdt_iops;
@@ -449,7 +450,7 @@ struct inode *
 nilfs_mdt_new_common(struct the_nilfs *nilfs, struct super_block *sb,
 		     ino_t ino, gfp_t gfp_mask)
 {
-	struct inode *inode = nilfs_alloc_inode(sb);
+	struct inode *inode = nilfs_alloc_inode_common(nilfs);
 
 	if (!inode)
 		return NULL;
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index da6fc0bba2e..edf6a59d9f2 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -263,6 +263,7 @@ extern void nilfs_dirty_inode(struct inode *);
 extern struct dentry *nilfs_get_parent(struct dentry *);
 
 /* super.c */
+extern struct inode *nilfs_alloc_inode_common(struct the_nilfs *);
 extern struct inode *nilfs_alloc_inode(struct super_block *);
 extern void nilfs_destroy_inode(struct inode *);
 extern void nilfs_error(struct super_block *, const char *, const char *, ...)
diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index 57afa9d2406..d80cc71be74 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -28,7 +28,6 @@
 #include "segment.h"
 #include "sufile.h"
 #include "page.h"
-#include "seglist.h"
 #include "segbuf.h"
 
 /*
@@ -395,6 +394,24 @@ static void dispose_recovery_list(struct list_head *head)
 	}
 }
 
+struct nilfs_segment_entry {
+	struct list_head	list;
+	__u64			segnum;
+};
+
+static int nilfs_segment_list_add(struct list_head *head, __u64 segnum)
+{
+	struct nilfs_segment_entry *ent = kmalloc(sizeof(*ent), GFP_NOFS);
+
+	if (unlikely(!ent))
+		return -ENOMEM;
+
+	ent->segnum = segnum;
+	INIT_LIST_HEAD(&ent->list);
+	list_add_tail(&ent->list, head);
+	return 0;
+}
+
 void nilfs_dispose_segment_list(struct list_head *head)
 {
 	while (!list_empty(head)) {
@@ -402,7 +419,7 @@ void nilfs_dispose_segment_list(struct list_head *head)
 			= list_entry(head->next,
 				     struct nilfs_segment_entry, list);
 		list_del(&ent->list);
-		nilfs_free_segment_entry(ent);
+		kfree(ent);
 	}
 }
 
@@ -431,12 +448,10 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	if (unlikely(err))
 		goto failed;
 
-	err = -ENOMEM;
 	for (i = 1; i < 4; i++) {
-		ent = nilfs_alloc_segment_entry(segnum[i]);
-		if (unlikely(!ent))
+		err = nilfs_segment_list_add(head, segnum[i]);
+		if (unlikely(err))
 			goto failed;
-		list_add_tail(&ent->list, head);
 	}
 
 	/*
@@ -450,7 +465,7 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 				goto failed;
 		}
 		list_del(&ent->list);
-		nilfs_free_segment_entry(ent);
+		kfree(ent);
 	}
 
 	/* Allocate new segments for recovery */
@@ -791,7 +806,6 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 	u64 seg_seq;
 	__u64 segnum, nextnum = 0;
 	__u64 cno;
-	struct nilfs_segment_entry *ent;
 	LIST_HEAD(segments);
 	int empty_seg = 0, scan_newer = 0;
 	int ret;
@@ -892,12 +906,9 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 		if (empty_seg++)
 			goto super_root_found; /* found a valid super root */
 
-		ent = nilfs_alloc_segment_entry(segnum);
-		if (unlikely(!ent)) {
-			ret = -ENOMEM;
+		ret = nilfs_segment_list_add(&segments, segnum);
+		if (unlikely(ret))
 			goto failed;
-		}
-		list_add_tail(&ent->list, &segments);
 
 		seg_seq++;
 		segnum = nextnum;
diff --git a/fs/nilfs2/segbuf.c b/fs/nilfs2/segbuf.c
index 1e68821b4a9..9e3fe17bb96 100644
--- a/fs/nilfs2/segbuf.c
+++ b/fs/nilfs2/segbuf.c
@@ -26,7 +26,6 @@
 #include <linux/crc32.h>
 #include "page.h"
 #include "segbuf.h"
-#include "seglist.h"
 
 
 static struct kmem_cache *nilfs_segbuf_cachep;
@@ -394,7 +393,7 @@ int nilfs_segbuf_write(struct nilfs_segment_buffer *segbuf,
 		 * Last BIO is always sent through the following
 		 * submission.
 		 */
-		rw |= (1 << BIO_RW_SYNCIO);
+		rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
 		res = nilfs_submit_seg_bio(wi, rw);
 		if (unlikely(res))
 			goto failed_bio;
diff --git a/fs/nilfs2/seglist.h b/fs/nilfs2/seglist.h
deleted file mode 100644
index d39df9144e9..00000000000
--- a/fs/nilfs2/seglist.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * seglist.h - expediential structure and routines to handle list of segments
- *             (would be removed in a future release)
- *
- * Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Written by Ryusuke Konishi <ryusuke@osrg.net>
- *
- */
-#ifndef _NILFS_SEGLIST_H
-#define _NILFS_SEGLIST_H
-
-#include <linux/fs.h>
-#include <linux/buffer_head.h>
-#include <linux/nilfs2_fs.h>
-#include "sufile.h"
-
-struct nilfs_segment_entry {
-	__u64			segnum;
-
-#define NILFS_SLH_FREED		0x0001	/* The segment was freed provisonally.
-					   It must be cancelled if
-					   construction aborted */
-
-	unsigned		flags;
-	struct list_head	list;
-	struct buffer_head     *bh_su;
-	struct nilfs_segment_usage *raw_su;
-};
-
-
-void nilfs_dispose_segment_list(struct list_head *);
-
-static inline struct nilfs_segment_entry *
-nilfs_alloc_segment_entry(__u64 segnum)
-{
-	struct nilfs_segment_entry *ent = kmalloc(sizeof(*ent), GFP_NOFS);
-
-	if (likely(ent)) {
-		ent->segnum = segnum;
-		ent->flags = 0;
-		ent->bh_su = NULL;
-		ent->raw_su = NULL;
-		INIT_LIST_HEAD(&ent->list);
-	}
-	return ent;
-}
-
-static inline int nilfs_open_segment_entry(struct nilfs_segment_entry *ent,
-					   struct inode *sufile)
-{
-	return nilfs_sufile_get_segment_usage(sufile, ent->segnum,
-					      &ent->raw_su, &ent->bh_su);
-}
-
-static inline void nilfs_close_segment_entry(struct nilfs_segment_entry *ent,
-					     struct inode *sufile)
-{
-	if (!ent->bh_su)
-		return;
-	nilfs_sufile_put_segment_usage(sufile, ent->segnum, ent->bh_su);
-	ent->bh_su = NULL;
-	ent->raw_su = NULL;
-}
-
-static inline void nilfs_free_segment_entry(struct nilfs_segment_entry *ent)
-{
-	kfree(ent);
-}
-
-#endif /* _NILFS_SEGLIST_H */
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 22c7f65c240..aa977549919 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -39,7 +39,6 @@
 #include "sufile.h"
 #include "cpfile.h"
 #include "ifile.h"
-#include "seglist.h"
 #include "segbuf.h"
 
 
@@ -79,7 +78,8 @@ enum {
 /* State flags of collection */
 #define NILFS_CF_NODE		0x0001	/* Collecting node blocks */
 #define NILFS_CF_IFILE_STARTED	0x0002	/* IFILE stage has started */
-#define NILFS_CF_HISTORY_MASK	(NILFS_CF_IFILE_STARTED)
+#define NILFS_CF_SUFREED	0x0004	/* segment usages has been freed */
+#define NILFS_CF_HISTORY_MASK	(NILFS_CF_IFILE_STARTED | NILFS_CF_SUFREED)
 
 /* Operations depending on the construction mode and file type */
 struct nilfs_sc_operations {
@@ -810,7 +810,7 @@ static int nilfs_segctor_clean(struct nilfs_sc_info *sci)
 {
 	return list_empty(&sci->sc_dirty_files) &&
 		!test_bit(NILFS_SC_DIRTY, &sci->sc_flags) &&
-		list_empty(&sci->sc_cleaning_segments) &&
+		sci->sc_nfreesegs == 0 &&
 		(!nilfs_doing_gc() || list_empty(&sci->sc_gc_inodes));
 }
 
@@ -1005,44 +1005,6 @@ static void nilfs_drop_collected_inodes(struct list_head *head)
 	}
 }
 
-static void nilfs_segctor_cancel_free_segments(struct nilfs_sc_info *sci,
-					       struct inode *sufile)
-
-{
-	struct list_head *head = &sci->sc_cleaning_segments;
-	struct nilfs_segment_entry *ent;
-	int err;
-
-	list_for_each_entry(ent, head, list) {
-		if (!(ent->flags & NILFS_SLH_FREED))
-			break;
-		err = nilfs_sufile_cancel_free(sufile, ent->segnum);
-		WARN_ON(err); /* do not happen */
-		ent->flags &= ~NILFS_SLH_FREED;
-	}
-}
-
-static int nilfs_segctor_prepare_free_segments(struct nilfs_sc_info *sci,
-					       struct inode *sufile)
-{
-	struct list_head *head = &sci->sc_cleaning_segments;
-	struct nilfs_segment_entry *ent;
-	int err;
-
-	list_for_each_entry(ent, head, list) {
-		err = nilfs_sufile_free(sufile, ent->segnum);
-		if (unlikely(err))
-			return err;
-		ent->flags |= NILFS_SLH_FREED;
-	}
-	return 0;
-}
-
-static void nilfs_segctor_commit_free_segments(struct nilfs_sc_info *sci)
-{
-	nilfs_dispose_segment_list(&sci->sc_cleaning_segments);
-}
-
 static int nilfs_segctor_apply_buffers(struct nilfs_sc_info *sci,
 				       struct inode *inode,
 				       struct list_head *listp,
@@ -1161,6 +1123,7 @@ static int nilfs_segctor_collect_blocks(struct nilfs_sc_info *sci, int mode)
 	struct the_nilfs *nilfs = sbi->s_nilfs;
 	struct list_head *head;
 	struct nilfs_inode_info *ii;
+	size_t ndone;
 	int err = 0;
 
 	switch (sci->sc_stage.scnt) {
@@ -1250,10 +1213,16 @@ static int nilfs_segctor_collect_blocks(struct nilfs_sc_info *sci, int mode)
 			break;
 		sci->sc_stage.scnt++;  /* Fall through */
 	case NILFS_ST_SUFILE:
-		err = nilfs_segctor_prepare_free_segments(sci,
-							  nilfs->ns_sufile);
-		if (unlikely(err))
+		err = nilfs_sufile_freev(nilfs->ns_sufile, sci->sc_freesegs,
+					 sci->sc_nfreesegs, &ndone);
+		if (unlikely(err)) {
+			nilfs_sufile_cancel_freev(nilfs->ns_sufile,
+						  sci->sc_freesegs, ndone,
+						  NULL);
 			break;
+		}
+		sci->sc_stage.flags |= NILFS_CF_SUFREED;
+
 		err = nilfs_segctor_scan_file(sci, nilfs->ns_sufile,
 					      &nilfs_sc_file_ops);
 		if (unlikely(err))
@@ -1486,7 +1455,15 @@ static void nilfs_segctor_end_construction(struct nilfs_sc_info *sci,
 {
 	if (unlikely(err)) {
 		nilfs_segctor_free_incomplete_segments(sci, nilfs);
-		nilfs_segctor_cancel_free_segments(sci, nilfs->ns_sufile);
+		if (sci->sc_stage.flags & NILFS_CF_SUFREED) {
+			int ret;
+
+			ret = nilfs_sufile_cancel_freev(nilfs->ns_sufile,
+							sci->sc_freesegs,
+							sci->sc_nfreesegs,
+							NULL);
+			WARN_ON(ret); /* do not happen */
+		}
 	}
 	nilfs_segctor_clear_segment_buffers(sci);
 }
@@ -1585,7 +1562,13 @@ static int nilfs_segctor_collect(struct nilfs_sc_info *sci,
 		if (mode != SC_LSEG_SR || sci->sc_stage.scnt < NILFS_ST_CPFILE)
 			break;
 
-		nilfs_segctor_cancel_free_segments(sci, nilfs->ns_sufile);
+		if (sci->sc_stage.flags & NILFS_CF_SUFREED) {
+			err = nilfs_sufile_cancel_freev(nilfs->ns_sufile,
+							sci->sc_freesegs,
+							sci->sc_nfreesegs,
+							NULL);
+			WARN_ON(err); /* do not happen */
+		}
 		nilfs_segctor_clear_segment_buffers(sci);
 
 		err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
@@ -2224,10 +2207,8 @@ static int nilfs_segctor_do_construct(struct nilfs_sc_info *sci, int mode)
 		nilfs_segctor_complete_write(sci);
 
 		/* Commit segments */
-		if (has_sr) {
-			nilfs_segctor_commit_free_segments(sci);
+		if (has_sr)
 			nilfs_segctor_clear_metadata_dirty(sci);
-		}
 
 		nilfs_segctor_end_construction(sci, nilfs, 0);
 
@@ -2301,48 +2282,6 @@ void nilfs_flush_segment(struct super_block *sb, ino_t ino)
 					/* assign bit 0 to data files */
 }
 
-int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *sci,
-					   __u64 *segnum, size_t nsegs)
-{
-	struct nilfs_segment_entry *ent;
-	struct the_nilfs *nilfs = sci->sc_sbi->s_nilfs;
-	struct inode *sufile = nilfs->ns_sufile;
-	LIST_HEAD(list);
-	__u64 *pnum;
-	size_t i;
-	int err;
-
-	for (pnum = segnum, i = 0; i < nsegs; pnum++, i++) {
-		ent = nilfs_alloc_segment_entry(*pnum);
-		if (unlikely(!ent)) {
-			err = -ENOMEM;
-			goto failed;
-		}
-		list_add_tail(&ent->list, &list);
-
-		err = nilfs_open_segment_entry(ent, sufile);
-		if (unlikely(err))
-			goto failed;
-
-		if (unlikely(!nilfs_segment_usage_dirty(ent->raw_su)))
-			printk(KERN_WARNING "NILFS: unused segment is "
-			       "requested to be cleaned (segnum=%llu)\n",
-			       (unsigned long long)ent->segnum);
-		nilfs_close_segment_entry(ent, sufile);
-	}
-	list_splice(&list, sci->sc_cleaning_segments.prev);
-	return 0;
-
- failed:
-	nilfs_dispose_segment_list(&list);
-	return err;
-}
-
-void nilfs_segctor_clear_segments_to_be_freed(struct nilfs_sc_info *sci)
-{
-	nilfs_dispose_segment_list(&sci->sc_cleaning_segments);
-}
-
 struct nilfs_segctor_wait_request {
 	wait_queue_t	wq;
 	__u32		seq;
@@ -2607,10 +2546,13 @@ int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
 	err = nilfs_init_gcdat_inode(nilfs);
 	if (unlikely(err))
 		goto out_unlock;
+
 	err = nilfs_ioctl_prepare_clean_segments(nilfs, argv, kbufs);
 	if (unlikely(err))
 		goto out_unlock;
 
+	sci->sc_freesegs = kbufs[4];
+	sci->sc_nfreesegs = argv[4].v_nmembs;
 	list_splice_init(&nilfs->ns_gc_inodes, sci->sc_gc_inodes.prev);
 
 	for (;;) {
@@ -2629,6 +2571,8 @@ int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
 	}
 
  out_unlock:
+	sci->sc_freesegs = NULL;
+	sci->sc_nfreesegs = 0;
 	nilfs_clear_gcdat_inode(nilfs);
 	nilfs_transaction_unlock(sbi);
 	return err;
@@ -2835,7 +2779,6 @@ static struct nilfs_sc_info *nilfs_segctor_new(struct nilfs_sb_info *sbi)
 	INIT_LIST_HEAD(&sci->sc_dirty_files);
 	INIT_LIST_HEAD(&sci->sc_segbufs);
 	INIT_LIST_HEAD(&sci->sc_gc_inodes);
-	INIT_LIST_HEAD(&sci->sc_cleaning_segments);
 	INIT_LIST_HEAD(&sci->sc_copied_buffers);
 
 	sci->sc_interval = HZ * NILFS_SC_DEFAULT_TIMEOUT;
@@ -2901,9 +2844,6 @@ static void nilfs_segctor_destroy(struct nilfs_sc_info *sci)
 		nilfs_dispose_list(sbi, &sci->sc_dirty_files, 1);
 	}
 
-	if (!list_empty(&sci->sc_cleaning_segments))
-		nilfs_dispose_segment_list(&sci->sc_cleaning_segments);
-
 	WARN_ON(!list_empty(&sci->sc_segbufs));
 
 	down_write(&sbi->s_nilfs->ns_segctor_sem);
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index 476bdd5df5b..0d2a475a741 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -90,8 +90,9 @@ struct nilfs_segsum_pointer {
  * @sc_nblk_inc: Block count of current generation
  * @sc_dirty_files: List of files to be written
  * @sc_gc_inodes: List of GC inodes having blocks to be written
- * @sc_cleaning_segments: List of segments to be freed through construction
  * @sc_copied_buffers: List of copied buffers (buffer heads) to freeze data
+ * @sc_freesegs: array of segment numbers to be freed
+ * @sc_nfreesegs: number of segments on @sc_freesegs
  * @sc_dsync_inode: inode whose data pages are written for a sync operation
  * @sc_dsync_start: start byte offset of data pages
  * @sc_dsync_end: end byte offset of data pages (inclusive)
@@ -131,9 +132,11 @@ struct nilfs_sc_info {
 
 	struct list_head	sc_dirty_files;
 	struct list_head	sc_gc_inodes;
-	struct list_head	sc_cleaning_segments;
 	struct list_head	sc_copied_buffers;
 
+	__u64		       *sc_freesegs;
+	size_t			sc_nfreesegs;
+
 	struct nilfs_inode_info *sc_dsync_inode;
 	loff_t			sc_dsync_start;
 	loff_t			sc_dsync_end;
@@ -225,10 +228,6 @@ extern void nilfs_flush_segment(struct super_block *, ino_t);
 extern int nilfs_clean_segments(struct super_block *, struct nilfs_argv *,
 				void **);
 
-extern int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *,
-						  __u64 *, size_t);
-extern void nilfs_segctor_clear_segments_to_be_freed(struct nilfs_sc_info *);
-
 extern int nilfs_attach_segment_constructor(struct nilfs_sb_info *);
 extern void nilfs_detach_segment_constructor(struct nilfs_sb_info *);
 
@@ -240,5 +239,6 @@ extern int nilfs_search_super_root(struct the_nilfs *, struct nilfs_sb_info *,
 extern int nilfs_recover_logical_segments(struct the_nilfs *,
 					  struct nilfs_sb_info *,
 					  struct nilfs_recovery_info *);
+extern void nilfs_dispose_segment_list(struct list_head *);
 
 #endif /* _NILFS_SEGMENT_H */
diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c
index 98e68677f04..37994d4a59c 100644
--- a/fs/nilfs2/sufile.c
+++ b/fs/nilfs2/sufile.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  * Written by Koji Sato <koji@osrg.net>.
+ * Rivised by Ryusuke Konishi <ryusuke@osrg.net>.
  */
 
 #include <linux/kernel.h>
@@ -108,6 +109,102 @@ static void nilfs_sufile_mod_counter(struct buffer_head *header_bh,
 	nilfs_mdt_mark_buffer_dirty(header_bh);
 }
 
+/**
+ * nilfs_sufile_updatev - modify multiple segment usages at a time
+ * @sufile: inode of segment usage file
+ * @segnumv: array of segment numbers
+ * @nsegs: size of @segnumv array
+ * @create: creation flag
+ * @ndone: place to store number of modified segments on @segnumv
+ * @dofunc: primitive operation for the update
+ *
+ * Description: nilfs_sufile_updatev() repeatedly calls @dofunc
+ * against the given array of segments.  The @dofunc is called with
+ * buffers of a header block and the sufile block in which the target
+ * segment usage entry is contained.  If @ndone is given, the number
+ * of successfully modified segments from the head is stored in the
+ * place @ndone points to.
+ *
+ * Return Value: On success, zero is returned.  On error, one of the
+ * following negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ *
+ * %-ENOENT - Given segment usage is in hole block (may be returned if
+ *            @create is zero)
+ *
+ * %-EINVAL - Invalid segment usage number
+ */
+int nilfs_sufile_updatev(struct inode *sufile, __u64 *segnumv, size_t nsegs,
+			 int create, size_t *ndone,
+			 void (*dofunc)(struct inode *, __u64,
+					struct buffer_head *,
+					struct buffer_head *))
+{
+	struct buffer_head *header_bh, *bh;
+	unsigned long blkoff, prev_blkoff;
+	__u64 *seg;
+	size_t nerr = 0, n = 0;
+	int ret = 0;
+
+	if (unlikely(nsegs == 0))
+		goto out;
+
+	down_write(&NILFS_MDT(sufile)->mi_sem);
+	for (seg = segnumv; seg < segnumv + nsegs; seg++) {
+		if (unlikely(*seg >= nilfs_sufile_get_nsegments(sufile))) {
+			printk(KERN_WARNING
+			       "%s: invalid segment number: %llu\n", __func__,
+			       (unsigned long long)*seg);
+			nerr++;
+		}
+	}
+	if (nerr > 0) {
+		ret = -EINVAL;
+		goto out_sem;
+	}
+
+	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
+	if (ret < 0)
+		goto out_sem;
+
+	seg = segnumv;
+	blkoff = nilfs_sufile_get_blkoff(sufile, *seg);
+	ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh);
+	if (ret < 0)
+		goto out_header;
+
+	for (;;) {
+		dofunc(sufile, *seg, header_bh, bh);
+
+		if (++seg >= segnumv + nsegs)
+			break;
+		prev_blkoff = blkoff;
+		blkoff = nilfs_sufile_get_blkoff(sufile, *seg);
+		if (blkoff == prev_blkoff)
+			continue;
+
+		/* get different block */
+		brelse(bh);
+		ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh);
+		if (unlikely(ret < 0))
+			goto out_header;
+	}
+	brelse(bh);
+
+ out_header:
+	n = seg - segnumv;
+	brelse(header_bh);
+ out_sem:
+	up_write(&NILFS_MDT(sufile)->mi_sem);
+ out:
+	if (ndone)
+		*ndone = n;
+	return ret;
+}
+
 int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create,
 			void (*dofunc)(struct inode *, __u64,
 				       struct buffer_head *,
@@ -490,7 +587,8 @@ void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
  * nilfs_sufile_get_suinfo -
  * @sufile: inode of segment usage file
  * @segnum: segment number to start looking
- * @si: array of suinfo
+ * @buf: array of suinfo
+ * @sisz: byte size of suinfo
  * @nsi: size of suinfo array
  *
  * Description:
@@ -502,11 +600,12 @@ void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
  *
  * %-ENOMEM - Insufficient amount of memory available.
  */
-ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum,
-				struct nilfs_suinfo *si, size_t nsi)
+ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum, void *buf,
+				unsigned sisz, size_t nsi)
 {
 	struct buffer_head *su_bh;
 	struct nilfs_segment_usage *su;
+	struct nilfs_suinfo *si = buf;
 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
 	struct the_nilfs *nilfs = NILFS_MDT(sufile)->mi_nilfs;
 	void *kaddr;
@@ -531,20 +630,22 @@ ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum,
 			if (ret != -ENOENT)
 				goto out;
 			/* hole */
-			memset(&si[i], 0, sizeof(struct nilfs_suinfo) * n);
+			memset(si, 0, sisz * n);
+			si = (void *)si + sisz * n;
 			continue;
 		}
 
 		kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
 		su = nilfs_sufile_block_get_segment_usage(
 			sufile, segnum, su_bh, kaddr);
-		for (j = 0; j < n; j++, su = (void *)su + susz) {
-			si[i + j].sui_lastmod = le64_to_cpu(su->su_lastmod);
-			si[i + j].sui_nblocks = le32_to_cpu(su->su_nblocks);
-			si[i + j].sui_flags = le32_to_cpu(su->su_flags) &
+		for (j = 0; j < n;
+		     j++, su = (void *)su + susz, si = (void *)si + sisz) {
+			si->sui_lastmod = le64_to_cpu(su->su_lastmod);
+			si->sui_nblocks = le32_to_cpu(su->su_nblocks);
+			si->sui_flags = le32_to_cpu(su->su_flags) &
 				~(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
 			if (nilfs_segment_is_active(nilfs, segnum + j))
-				si[i + j].sui_flags |=
+				si->sui_flags |=
 					(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
 		}
 		kunmap_atomic(kaddr, KM_USER0);
diff --git a/fs/nilfs2/sufile.h b/fs/nilfs2/sufile.h
index a2e2efd4ade..a2c4d76c336 100644
--- a/fs/nilfs2/sufile.h
+++ b/fs/nilfs2/sufile.h
@@ -43,43 +43,27 @@ void nilfs_sufile_put_segment_usage(struct inode *, __u64,
 				    struct buffer_head *);
 int nilfs_sufile_get_stat(struct inode *, struct nilfs_sustat *);
 int nilfs_sufile_get_ncleansegs(struct inode *, unsigned long *);
-ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, struct nilfs_suinfo *,
+ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, void *, unsigned,
 				size_t);
 
+int nilfs_sufile_updatev(struct inode *, __u64 *, size_t, int, size_t *,
+			 void (*dofunc)(struct inode *, __u64,
+					struct buffer_head *,
+					struct buffer_head *));
 int nilfs_sufile_update(struct inode *, __u64, int,
 			void (*dofunc)(struct inode *, __u64,
 				       struct buffer_head *,
 				       struct buffer_head *));
-void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
-				 struct buffer_head *);
 void nilfs_sufile_do_scrap(struct inode *, __u64, struct buffer_head *,
 			   struct buffer_head *);
 void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *,
 			  struct buffer_head *);
+void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
+				 struct buffer_head *);
 void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *,
 			       struct buffer_head *);
 
 /**
- * nilfs_sufile_cancel_free -
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description:
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
-{
-	return nilfs_sufile_update(sufile, segnum, 0,
-				   nilfs_sufile_do_cancel_free);
-}
-
-/**
  * nilfs_sufile_scrap - make a segment garbage
  * @sufile: inode of segment usage file
  * @segnum: segment number to be freed
@@ -100,6 +84,38 @@ static inline int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
 }
 
 /**
+ * nilfs_sufile_freev - free segments
+ * @sufile: inode of segment usage file
+ * @segnumv: array of segment numbers
+ * @nsegs: size of @segnumv array
+ * @ndone: place to store the number of freed segments
+ */
+static inline int nilfs_sufile_freev(struct inode *sufile, __u64 *segnumv,
+				     size_t nsegs, size_t *ndone)
+{
+	return nilfs_sufile_updatev(sufile, segnumv, nsegs, 0, ndone,
+				    nilfs_sufile_do_free);
+}
+
+/**
+ * nilfs_sufile_cancel_freev - reallocate freeing segments
+ * @sufile: inode of segment usage file
+ * @segnumv: array of segment numbers
+ * @nsegs: size of @segnumv array
+ * @ndone: place to store the number of cancelled segments
+ *
+ * Return Value: On success, 0 is returned. On error, a negative error codes
+ * is returned.
+ */
+static inline int nilfs_sufile_cancel_freev(struct inode *sufile,
+					    __u64 *segnumv, size_t nsegs,
+					    size_t *ndone)
+{
+	return nilfs_sufile_updatev(sufile, segnumv, nsegs, 0, ndone,
+				    nilfs_sufile_do_cancel_free);
+}
+
+/**
  * nilfs_sufile_set_error - mark a segment as erroneous
  * @sufile: inode of segment usage file
  * @segnum: segment number
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 1777a3467bd..ab785f85aa5 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -133,7 +133,7 @@ void nilfs_warning(struct super_block *sb, const char *function,
 
 static struct kmem_cache *nilfs_inode_cachep;
 
-struct inode *nilfs_alloc_inode(struct super_block *sb)
+struct inode *nilfs_alloc_inode_common(struct the_nilfs *nilfs)
 {
 	struct nilfs_inode_info *ii;
 
@@ -143,10 +143,15 @@ struct inode *nilfs_alloc_inode(struct super_block *sb)
 	ii->i_bh = NULL;
 	ii->i_state = 0;
 	ii->vfs_inode.i_version = 1;
-	nilfs_btnode_cache_init(&ii->i_btnode_cache);
+	nilfs_btnode_cache_init(&ii->i_btnode_cache, nilfs->ns_bdi);
 	return &ii->vfs_inode;
 }
 
+struct inode *nilfs_alloc_inode(struct super_block *sb)
+{
+	return nilfs_alloc_inode_common(NILFS_SB(sb)->s_nilfs);
+}
+
 void nilfs_destroy_inode(struct inode *inode)
 {
 	kmem_cache_free(nilfs_inode_cachep, NILFS_I(inode));
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index e4e5c78bcc9..8b888982571 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -32,7 +32,6 @@
 #include "cpfile.h"
 #include "sufile.h"
 #include "dat.h"
-#include "seglist.h"
 #include "segbuf.h"
 
 
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index 9b0efdad891..477d37d83b3 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -15,6 +15,7 @@
 #include <linux/errno.h>
 #include <linux/kmod.h>
 #include <linux/spinlock.h>
+#include <asm/byteorder.h>
 
 static struct nls_table default_table;
 static struct nls_table *tables = &default_table;
@@ -43,10 +44,17 @@ static const struct utf8_table utf8_table[] =
     {0,						       /* end of table    */}
 };
 
-int
-utf8_mbtowc(wchar_t *p, const __u8 *s, int n)
+#define UNICODE_MAX	0x0010ffff
+#define PLANE_SIZE	0x00010000
+
+#define SURROGATE_MASK	0xfffff800
+#define SURROGATE_PAIR	0x0000d800
+#define SURROGATE_LOW	0x00000400
+#define SURROGATE_BITS	0x000003ff
+
+int utf8_to_utf32(const u8 *s, int len, unicode_t *pu)
 {
-	long l;
+	unsigned long l;
 	int c0, c, nc;
 	const struct utf8_table *t;
   
@@ -57,12 +65,13 @@ utf8_mbtowc(wchar_t *p, const __u8 *s, int n)
 		nc++;
 		if ((c0 & t->cmask) == t->cval) {
 			l &= t->lmask;
-			if (l < t->lval)
+			if (l < t->lval || l > UNICODE_MAX ||
+					(l & SURROGATE_MASK) == SURROGATE_PAIR)
 				return -1;
-			*p = l;
+			*pu = (unicode_t) l;
 			return nc;
 		}
-		if (n <= nc)
+		if (len <= nc)
 			return -1;
 		s++;
 		c = (*s ^ 0x80) & 0xFF;
@@ -72,90 +81,133 @@ utf8_mbtowc(wchar_t *p, const __u8 *s, int n)
 	}
 	return -1;
 }
+EXPORT_SYMBOL(utf8_to_utf32);
 
-int
-utf8_mbstowcs(wchar_t *pwcs, const __u8 *s, int n)
+int utf32_to_utf8(unicode_t u, u8 *s, int maxlen)
 {
-	__u16 *op;
-	const __u8 *ip;
-	int size;
-
-	op = pwcs;
-	ip = s;
-	while (*ip && n > 0) {
-		if (*ip & 0x80) {
-			size = utf8_mbtowc(op, ip, n);
-			if (size == -1) {
-				/* Ignore character and move on */
-				ip++;
-				n--;
-			} else {
-				op++;
-				ip += size;
-				n -= size;
-			}
-		} else {
-			*op++ = *ip++;
-			n--;
-		}
-	}
-	return (op - pwcs);
-}
-
-int
-utf8_wctomb(__u8 *s, wchar_t wc, int maxlen)
-{
-	long l;
+	unsigned long l;
 	int c, nc;
 	const struct utf8_table *t;
-  
+
 	if (!s)
 		return 0;
-  
-	l = wc;
+
+	l = u;
+	if (l > UNICODE_MAX || (l & SURROGATE_MASK) == SURROGATE_PAIR)
+		return -1;
+
 	nc = 0;
 	for (t = utf8_table; t->cmask && maxlen; t++, maxlen--) {
 		nc++;
 		if (l <= t->lmask) {
 			c = t->shift;
-			*s = t->cval | (l >> c);
+			*s = (u8) (t->cval | (l >> c));
 			while (c > 0) {
 				c -= 6;
 				s++;
-				*s = 0x80 | ((l >> c) & 0x3F);
+				*s = (u8) (0x80 | ((l >> c) & 0x3F));
 			}
 			return nc;
 		}
 	}
 	return -1;
 }
+EXPORT_SYMBOL(utf32_to_utf8);
 
-int
-utf8_wcstombs(__u8 *s, const wchar_t *pwcs, int maxlen)
+int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs)
 {
-	const __u16 *ip;
-	__u8 *op;
+	u16 *op;
 	int size;
+	unicode_t u;
+
+	op = pwcs;
+	while (*s && len > 0) {
+		if (*s & 0x80) {
+			size = utf8_to_utf32(s, len, &u);
+			if (size < 0) {
+				/* Ignore character and move on */
+				size = 1;
+			} else if (u >= PLANE_SIZE) {
+				u -= PLANE_SIZE;
+				*op++ = (wchar_t) (SURROGATE_PAIR |
+						((u >> 10) & SURROGATE_BITS));
+				*op++ = (wchar_t) (SURROGATE_PAIR |
+						SURROGATE_LOW |
+						(u & SURROGATE_BITS));
+			} else {
+				*op++ = (wchar_t) u;
+			}
+			s += size;
+			len -= size;
+		} else {
+			*op++ = *s++;
+			len--;
+		}
+	}
+	return op - pwcs;
+}
+EXPORT_SYMBOL(utf8s_to_utf16s);
+
+static inline unsigned long get_utf16(unsigned c, enum utf16_endian endian)
+{
+	switch (endian) {
+	default:
+		return c;
+	case UTF16_LITTLE_ENDIAN:
+		return __le16_to_cpu(c);
+	case UTF16_BIG_ENDIAN:
+		return __be16_to_cpu(c);
+	}
+}
+
+int utf16s_to_utf8s(const wchar_t *pwcs, int len, enum utf16_endian endian,
+		u8 *s, int maxlen)
+{
+	u8 *op;
+	int size;
+	unsigned long u, v;
 
 	op = s;
-	ip = pwcs;
-	while (*ip && maxlen > 0) {
-		if (*ip > 0x7f) {
-			size = utf8_wctomb(op, *ip, maxlen);
+	while (len > 0 && maxlen > 0) {
+		u = get_utf16(*pwcs, endian);
+		if (!u)
+			break;
+		pwcs++;
+		len--;
+		if (u > 0x7f) {
+			if ((u & SURROGATE_MASK) == SURROGATE_PAIR) {
+				if (u & SURROGATE_LOW) {
+					/* Ignore character and move on */
+					continue;
+				}
+				if (len <= 0)
+					break;
+				v = get_utf16(*pwcs, endian);
+				if ((v & SURROGATE_MASK) != SURROGATE_PAIR ||
+						!(v & SURROGATE_LOW)) {
+					/* Ignore character and move on */
+					continue;
+				}
+				u = PLANE_SIZE + ((u & SURROGATE_BITS) << 10)
+						+ (v & SURROGATE_BITS);
+				pwcs++;
+				len--;
+			}
+			size = utf32_to_utf8(u, op, maxlen);
 			if (size == -1) {
 				/* Ignore character and move on */
-				maxlen--;
 			} else {
 				op += size;
 				maxlen -= size;
 			}
 		} else {
-			*op++ = (__u8) *ip;
+			*op++ = (u8) u;
+			maxlen--;
 		}
-		ip++;
 	}
-	return (op - s);
+	return op - s;
 }
+EXPORT_SYMBOL(utf16s_to_utf8s);
 
 int register_nls(struct nls_table * nls)
 {
@@ -467,9 +519,5 @@ EXPORT_SYMBOL(unregister_nls);
 EXPORT_SYMBOL(unload_nls);
 EXPORT_SYMBOL(load_nls);
 EXPORT_SYMBOL(load_nls_default);
-EXPORT_SYMBOL(utf8_mbtowc);
-EXPORT_SYMBOL(utf8_mbstowcs);
-EXPORT_SYMBOL(utf8_wctomb);
-EXPORT_SYMBOL(utf8_wcstombs);
 
 MODULE_LICENSE("Dual BSD/GPL");
diff --git a/fs/nls/nls_utf8.c b/fs/nls/nls_utf8.c
index aa2c42fdd97..0d60a44acac 100644
--- a/fs/nls/nls_utf8.c
+++ b/fs/nls/nls_utf8.c
@@ -15,7 +15,11 @@ static int uni2char(wchar_t uni, unsigned char *out, int boundlen)
 {
 	int n;
 
-	if ( (n = utf8_wctomb(out, uni, boundlen)) == -1) {
+	if (boundlen <= 0)
+		return -ENAMETOOLONG;
+
+	n = utf32_to_utf8(uni, out, boundlen);
+	if (n < 0) {
 		*out = '?';
 		return -EINVAL;
 	}
@@ -25,11 +29,14 @@ static int uni2char(wchar_t uni, unsigned char *out, int boundlen)
 static int char2uni(const unsigned char *rawstring, int boundlen, wchar_t *uni)
 {
 	int n;
+	unicode_t u;
 
-	if ( (n = utf8_mbtowc(uni, rawstring, boundlen)) == -1) {
+	n = utf8_to_utf32(rawstring, boundlen, &u);
+	if (n < 0 || u > MAX_WCHAR_T) {
 		*uni = 0x003f;	/* ? */
-		n = -EINVAL;
+		return -EINVAL;
 	}
+	*uni = (wchar_t) u;
 	return n;
 }
 
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 82c5085559c..9938034762c 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -27,6 +27,7 @@
 #include <linux/pagemap.h>
 #include <linux/quotaops.h>
 #include <linux/slab.h>
+#include <linux/log2.h>
 
 #include "aops.h"
 #include "attrib.h"
@@ -1570,7 +1571,7 @@ static int ntfs_read_locked_index_inode(struct inode *base_vi, struct inode *vi)
 	ntfs_debug("Index collation rule is 0x%x.",
 			le32_to_cpu(ir->collation_rule));
 	ni->itype.index.block_size = le32_to_cpu(ir->index_block_size);
-	if (ni->itype.index.block_size & (ni->itype.index.block_size - 1)) {
+	if (!is_power_of_2(ni->itype.index.block_size)) {
 		ntfs_error(vi->i_sb, "Index block size (%u) is not a power of "
 				"two.", ni->itype.index.block_size);
 		goto unm_err_out;
diff --git a/fs/ntfs/logfile.c b/fs/ntfs/logfile.c
index d7932e95b1f..89b02985c05 100644
--- a/fs/ntfs/logfile.c
+++ b/fs/ntfs/logfile.c
@@ -26,6 +26,7 @@
 #include <linux/highmem.h>
 #include <linux/buffer_head.h>
 #include <linux/bitops.h>
+#include <linux/log2.h>
 
 #include "attrib.h"
 #include "aops.h"
@@ -65,7 +66,7 @@ static bool ntfs_check_restart_page_header(struct inode *vi,
 			logfile_log_page_size < NTFS_BLOCK_SIZE ||
 			logfile_system_page_size &
 			(logfile_system_page_size - 1) ||
-			logfile_log_page_size & (logfile_log_page_size - 1)) {
+			!is_power_of_2(logfile_log_page_size)) {
 		ntfs_error(vi->i_sb, "$LogFile uses unsupported page size.");
 		return false;
 	}
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 678a067d925..9edcde4974a 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -475,6 +475,12 @@ struct ocfs2_path {
 #define path_leaf_el(_path) ((_path)->p_node[(_path)->p_tree_depth].el)
 #define path_num_items(_path) ((_path)->p_tree_depth + 1)
 
+static int ocfs2_find_path(struct inode *inode, struct ocfs2_path *path,
+			   u32 cpos);
+static void ocfs2_adjust_rightmost_records(struct inode *inode,
+					   handle_t *handle,
+					   struct ocfs2_path *path,
+					   struct ocfs2_extent_rec *insert_rec);
 /*
  * Reset the actual path elements so that we can re-use the structure
  * to build another path. Generally, this involves freeing the buffer
@@ -1013,6 +1019,54 @@ static inline u32 ocfs2_sum_rightmost_rec(struct ocfs2_extent_list  *el)
 }
 
 /*
+ * Change range of the branches in the right most path according to the leaf
+ * extent block's rightmost record.
+ */
+static int ocfs2_adjust_rightmost_branch(handle_t *handle,
+					 struct inode *inode,
+					 struct ocfs2_extent_tree *et)
+{
+	int status;
+	struct ocfs2_path *path = NULL;
+	struct ocfs2_extent_list *el;
+	struct ocfs2_extent_rec *rec;
+
+	path = ocfs2_new_path_from_et(et);
+	if (!path) {
+		status = -ENOMEM;
+		return status;
+	}
+
+	status = ocfs2_find_path(inode, path, UINT_MAX);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out;
+	}
+
+	status = ocfs2_extend_trans(handle, path_num_items(path) +
+				    handle->h_buffer_credits);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out;
+	}
+
+	status = ocfs2_journal_access_path(inode, handle, path);
+	if (status < 0) {
+		mlog_errno(status);
+		goto out;
+	}
+
+	el = path_leaf_el(path);
+	rec = &el->l_recs[le32_to_cpu(el->l_next_free_rec) - 1];
+
+	ocfs2_adjust_rightmost_records(inode, handle, path, rec);
+
+out:
+	ocfs2_free_path(path);
+	return status;
+}
+
+/*
  * Add an entire tree branch to our inode. eb_bh is the extent block
  * to start at, if we don't want to start the branch at the dinode
  * structure.
@@ -1038,7 +1092,7 @@ static int ocfs2_add_branch(struct ocfs2_super *osb,
 	struct ocfs2_extent_block *eb;
 	struct ocfs2_extent_list  *eb_el;
 	struct ocfs2_extent_list  *el;
-	u32 new_cpos;
+	u32 new_cpos, root_end;
 
 	mlog_entry_void();
 
@@ -1055,6 +1109,27 @@ static int ocfs2_add_branch(struct ocfs2_super *osb,
 
 	new_blocks = le16_to_cpu(el->l_tree_depth);
 
+	eb = (struct ocfs2_extent_block *)(*last_eb_bh)->b_data;
+	new_cpos = ocfs2_sum_rightmost_rec(&eb->h_list);
+	root_end = ocfs2_sum_rightmost_rec(et->et_root_el);
+
+	/*
+	 * If there is a gap before the root end and the real end
+	 * of the righmost leaf block, we need to remove the gap
+	 * between new_cpos and root_end first so that the tree
+	 * is consistent after we add a new branch(it will start
+	 * from new_cpos).
+	 */
+	if (root_end > new_cpos) {
+		mlog(0, "adjust the cluster end from %u to %u\n",
+		     root_end, new_cpos);
+		status = ocfs2_adjust_rightmost_branch(handle, inode, et);
+		if (status) {
+			mlog_errno(status);
+			goto bail;
+		}
+	}
+
 	/* allocate the number of new eb blocks we need */
 	new_eb_bhs = kcalloc(new_blocks, sizeof(struct buffer_head *),
 			     GFP_KERNEL);
@@ -1071,9 +1146,6 @@ static int ocfs2_add_branch(struct ocfs2_super *osb,
 		goto bail;
 	}
 
-	eb = (struct ocfs2_extent_block *)(*last_eb_bh)->b_data;
-	new_cpos = ocfs2_sum_rightmost_rec(&eb->h_list);
-
 	/* Note: new_eb_bhs[new_blocks - 1] is the guy which will be
 	 * linked with the rest of the tree.
 	 * conversly, new_eb_bhs[0] is the new bottommost leaf.
diff --git a/fs/ocfs2/blockcheck.c b/fs/ocfs2/blockcheck.c
index 2a947c44e59..a1163b8b417 100644
--- a/fs/ocfs2/blockcheck.c
+++ b/fs/ocfs2/blockcheck.c
@@ -22,6 +22,9 @@
 #include <linux/crc32.h>
 #include <linux/buffer_head.h>
 #include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/fs.h>
 #include <asm/byteorder.h>
 
 #include <cluster/masklog.h>
@@ -222,6 +225,155 @@ void ocfs2_hamming_fix_block(void *data, unsigned int blocksize,
 	ocfs2_hamming_fix(data, blocksize * 8, 0, fix);
 }
 
+
+/*
+ * Debugfs handling.
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int blockcheck_u64_get(void *data, u64 *val)
+{
+	*val = *(u64 *)data;
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(blockcheck_fops, blockcheck_u64_get, NULL, "%llu\n");
+
+static struct dentry *blockcheck_debugfs_create(const char *name,
+						struct dentry *parent,
+						u64 *value)
+{
+	return debugfs_create_file(name, S_IFREG | S_IRUSR, parent, value,
+				   &blockcheck_fops);
+}
+
+static void ocfs2_blockcheck_debug_remove(struct ocfs2_blockcheck_stats *stats)
+{
+	if (stats) {
+		debugfs_remove(stats->b_debug_check);
+		stats->b_debug_check = NULL;
+		debugfs_remove(stats->b_debug_failure);
+		stats->b_debug_failure = NULL;
+		debugfs_remove(stats->b_debug_recover);
+		stats->b_debug_recover = NULL;
+		debugfs_remove(stats->b_debug_dir);
+		stats->b_debug_dir = NULL;
+	}
+}
+
+static int ocfs2_blockcheck_debug_install(struct ocfs2_blockcheck_stats *stats,
+					  struct dentry *parent)
+{
+	int rc = -EINVAL;
+
+	if (!stats)
+		goto out;
+
+	stats->b_debug_dir = debugfs_create_dir("blockcheck", parent);
+	if (!stats->b_debug_dir)
+		goto out;
+
+	stats->b_debug_check =
+		blockcheck_debugfs_create("blocks_checked",
+					  stats->b_debug_dir,
+					  &stats->b_check_count);
+
+	stats->b_debug_failure =
+		blockcheck_debugfs_create("checksums_failed",
+					  stats->b_debug_dir,
+					  &stats->b_failure_count);
+
+	stats->b_debug_recover =
+		blockcheck_debugfs_create("ecc_recoveries",
+					  stats->b_debug_dir,
+					  &stats->b_recover_count);
+	if (stats->b_debug_check && stats->b_debug_failure &&
+	    stats->b_debug_recover)
+		rc = 0;
+
+out:
+	if (rc)
+		ocfs2_blockcheck_debug_remove(stats);
+	return rc;
+}
+#else
+static inline int ocfs2_blockcheck_debug_install(struct ocfs2_blockcheck_stats *stats,
+						 struct dentry *parent)
+{
+	return 0;
+}
+
+static inline void ocfs2_blockcheck_debug_remove(struct ocfs2_blockcheck_stats *stats)
+{
+}
+#endif  /* CONFIG_DEBUG_FS */
+
+/* Always-called wrappers for starting and stopping the debugfs files */
+int ocfs2_blockcheck_stats_debugfs_install(struct ocfs2_blockcheck_stats *stats,
+					   struct dentry *parent)
+{
+	return ocfs2_blockcheck_debug_install(stats, parent);
+}
+
+void ocfs2_blockcheck_stats_debugfs_remove(struct ocfs2_blockcheck_stats *stats)
+{
+	ocfs2_blockcheck_debug_remove(stats);
+}
+
+static void ocfs2_blockcheck_inc_check(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_check_count++;
+	new_count = stats->b_check_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "Block check count has wrapped\n");
+}
+
+static void ocfs2_blockcheck_inc_failure(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_failure_count++;
+	new_count = stats->b_failure_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "Checksum failure count has wrapped\n");
+}
+
+static void ocfs2_blockcheck_inc_recover(struct ocfs2_blockcheck_stats *stats)
+{
+	u64 new_count;
+
+	if (!stats)
+		return;
+
+	spin_lock(&stats->b_lock);
+	stats->b_recover_count++;
+	new_count = stats->b_recover_count;
+	spin_unlock(&stats->b_lock);
+
+	if (!new_count)
+		mlog(ML_NOTICE, "ECC recovery count has wrapped\n");
+}
+
+
+
+/*
+ * These are the low-level APIs for using the ocfs2_block_check structure.
+ */
+
 /*
  * This function generates check information for a block.
  * data is the block to be checked.  bc is a pointer to the
@@ -266,12 +418,15 @@ void ocfs2_block_check_compute(void *data, size_t blocksize,
  * Again, the data passed in should be the on-disk endian.
  */
 int ocfs2_block_check_validate(void *data, size_t blocksize,
-			       struct ocfs2_block_check *bc)
+			       struct ocfs2_block_check *bc,
+			       struct ocfs2_blockcheck_stats *stats)
 {
 	int rc = 0;
 	struct ocfs2_block_check check;
 	u32 crc, ecc;
 
+	ocfs2_blockcheck_inc_check(stats);
+
 	check.bc_crc32e = le32_to_cpu(bc->bc_crc32e);
 	check.bc_ecc = le16_to_cpu(bc->bc_ecc);
 
@@ -282,6 +437,7 @@ int ocfs2_block_check_validate(void *data, size_t blocksize,
 	if (crc == check.bc_crc32e)
 		goto out;
 
+	ocfs2_blockcheck_inc_failure(stats);
 	mlog(ML_ERROR,
 	     "CRC32 failed: stored: %u, computed %u.  Applying ECC.\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
@@ -292,8 +448,10 @@ int ocfs2_block_check_validate(void *data, size_t blocksize,
 
 	/* And check the crc32 again */
 	crc = crc32_le(~0, data, blocksize);
-	if (crc == check.bc_crc32e)
+	if (crc == check.bc_crc32e) {
+		ocfs2_blockcheck_inc_recover(stats);
 		goto out;
+	}
 
 	mlog(ML_ERROR, "Fixed CRC32 failed: stored: %u, computed %u\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
@@ -366,7 +524,8 @@ void ocfs2_block_check_compute_bhs(struct buffer_head **bhs, int nr,
  * Again, the data passed in should be the on-disk endian.
  */
 int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
-				   struct ocfs2_block_check *bc)
+				   struct ocfs2_block_check *bc,
+				   struct ocfs2_blockcheck_stats *stats)
 {
 	int i, rc = 0;
 	struct ocfs2_block_check check;
@@ -377,6 +536,8 @@ int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
 	if (!nr)
 		return 0;
 
+	ocfs2_blockcheck_inc_check(stats);
+
 	check.bc_crc32e = le32_to_cpu(bc->bc_crc32e);
 	check.bc_ecc = le16_to_cpu(bc->bc_ecc);
 
@@ -388,6 +549,7 @@ int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
 	if (crc == check.bc_crc32e)
 		goto out;
 
+	ocfs2_blockcheck_inc_failure(stats);
 	mlog(ML_ERROR,
 	     "CRC32 failed: stored: %u, computed %u.  Applying ECC.\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
@@ -416,8 +578,10 @@ int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
 	/* And check the crc32 again */
 	for (i = 0, crc = ~0; i < nr; i++)
 		crc = crc32_le(crc, bhs[i]->b_data, bhs[i]->b_size);
-	if (crc == check.bc_crc32e)
+	if (crc == check.bc_crc32e) {
+		ocfs2_blockcheck_inc_recover(stats);
 		goto out;
+	}
 
 	mlog(ML_ERROR, "Fixed CRC32 failed: stored: %u, computed %u\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
@@ -448,9 +612,11 @@ int ocfs2_validate_meta_ecc(struct super_block *sb, void *data,
 			    struct ocfs2_block_check *bc)
 {
 	int rc = 0;
+	struct ocfs2_super *osb = OCFS2_SB(sb);
 
-	if (ocfs2_meta_ecc(OCFS2_SB(sb)))
-		rc = ocfs2_block_check_validate(data, sb->s_blocksize, bc);
+	if (ocfs2_meta_ecc(osb))
+		rc = ocfs2_block_check_validate(data, sb->s_blocksize, bc,
+						&osb->osb_ecc_stats);
 
 	return rc;
 }
@@ -468,9 +634,11 @@ int ocfs2_validate_meta_ecc_bhs(struct super_block *sb,
 				struct ocfs2_block_check *bc)
 {
 	int rc = 0;
+	struct ocfs2_super *osb = OCFS2_SB(sb);
 
-	if (ocfs2_meta_ecc(OCFS2_SB(sb)))
-		rc = ocfs2_block_check_validate_bhs(bhs, nr, bc);
+	if (ocfs2_meta_ecc(osb))
+		rc = ocfs2_block_check_validate_bhs(bhs, nr, bc,
+						    &osb->osb_ecc_stats);
 
 	return rc;
 }
diff --git a/fs/ocfs2/blockcheck.h b/fs/ocfs2/blockcheck.h
index 70ec3feda32..d4b69febf70 100644
--- a/fs/ocfs2/blockcheck.h
+++ b/fs/ocfs2/blockcheck.h
@@ -21,6 +21,24 @@
 #define OCFS2_BLOCKCHECK_H
 
 
+/* Count errors and error correction from blockcheck.c */
+struct ocfs2_blockcheck_stats {
+	spinlock_t b_lock;
+	u64 b_check_count;	/* Number of blocks we've checked */
+	u64 b_failure_count;	/* Number of failed checksums */
+	u64 b_recover_count;	/* Number of blocks fixed by ecc */
+
+	/*
+	 * debugfs entries, used if this is passed to
+	 * ocfs2_blockcheck_stats_debugfs_install()
+	 */
+	struct dentry *b_debug_dir;	/* Parent of the debugfs  files */
+	struct dentry *b_debug_check;	/* Exposes b_check_count */
+	struct dentry *b_debug_failure;	/* Exposes b_failure_count */
+	struct dentry *b_debug_recover;	/* Exposes b_recover_count */
+};
+
+
 /* High level block API */
 void ocfs2_compute_meta_ecc(struct super_block *sb, void *data,
 			    struct ocfs2_block_check *bc);
@@ -37,11 +55,18 @@ int ocfs2_validate_meta_ecc_bhs(struct super_block *sb,
 void ocfs2_block_check_compute(void *data, size_t blocksize,
 			       struct ocfs2_block_check *bc);
 int ocfs2_block_check_validate(void *data, size_t blocksize,
-			       struct ocfs2_block_check *bc);
+			       struct ocfs2_block_check *bc,
+			       struct ocfs2_blockcheck_stats *stats);
 void ocfs2_block_check_compute_bhs(struct buffer_head **bhs, int nr,
 				   struct ocfs2_block_check *bc);
 int ocfs2_block_check_validate_bhs(struct buffer_head **bhs, int nr,
-				   struct ocfs2_block_check *bc);
+				   struct ocfs2_block_check *bc,
+				   struct ocfs2_blockcheck_stats *stats);
+
+/* Debug Initialization */
+int ocfs2_blockcheck_stats_debugfs_install(struct ocfs2_blockcheck_stats *stats,
+					   struct dentry *parent);
+void ocfs2_blockcheck_stats_debugfs_remove(struct ocfs2_blockcheck_stats *stats);
 
 /*
  * Hamming code functions
diff --git a/fs/ocfs2/cluster/masklog.h b/fs/ocfs2/cluster/masklog.h
index 7e72a81bc2d..696c32e5071 100644
--- a/fs/ocfs2/cluster/masklog.h
+++ b/fs/ocfs2/cluster/masklog.h
@@ -48,34 +48,33 @@
  * only emit the appropriage printk() when the caller passes in a constant
  * mask, as is almost always the case.
  *
- * All this bitmask nonsense is hidden from the /proc interface so that Joel
- * doesn't have an aneurism.  Reading the file gives a straight forward
- * indication of which bits are on or off:
- * 	ENTRY off
- * 	EXIT off
+ * All this bitmask nonsense is managed from the files under
+ * /sys/fs/o2cb/logmask/.  Reading the files gives a straightforward
+ * indication of which bits are allowed (allow) or denied (off/deny).
+ * 	ENTRY deny
+ * 	EXIT deny
  * 	TCP off
  * 	MSG off
  * 	SOCKET off
- * 	ERROR off
- * 	NOTICE on
+ * 	ERROR allow
+ * 	NOTICE allow
  *
  * Writing changes the state of a given bit and requires a strictly formatted
  * single write() call:
  *
- * 	write(fd, "ENTRY on", 8);
+ * 	write(fd, "allow", 5);
  *
- * would turn the entry bit on.  "1" is also accepted in the place of "on", and
- * "off" and "0" behave as expected.
+ * Echoing allow/deny/off string into the logmask files can flip the bits
+ * on or off as expected; here is the bash script for example:
  *
- * Some trivial shell can flip all the bits on or off:
+ * log_mask="/sys/fs/o2cb/log_mask"
+ * for node in ENTRY EXIT TCP MSG SOCKET ERROR NOTICE; do
+ *	echo allow >"$log_mask"/"$node"
+ * done
  *
- * log_mask="/proc/fs/ocfs2_nodemanager/log_mask"
- * cat $log_mask | (
- * 	while read bit status; do
- * 		# $1 is "on" or "off", say
- * 		echo "$bit $1" > $log_mask
- * 	done
- * )
+ * The debugfs.ocfs2 tool can also flip the bits with the -l option:
+ *
+ * debugfs.ocfs2 -l TCP allow
  */
 
 /* for task_struct */
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 9fbe849f634..334f231a422 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -974,7 +974,7 @@ static int o2net_tx_can_proceed(struct o2net_node *nn,
 int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec,
 			   size_t caller_veclen, u8 target_node, int *status)
 {
-	int ret, error = 0;
+	int ret;
 	struct o2net_msg *msg = NULL;
 	size_t veclen, caller_bytes = 0;
 	struct kvec *vec = NULL;
@@ -1015,10 +1015,7 @@ int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec,
 
 	o2net_set_nst_sock_time(&nst);
 
-	ret = wait_event_interruptible(nn->nn_sc_wq,
-				       o2net_tx_can_proceed(nn, &sc, &error));
-	if (!ret && error)
-		ret = error;
+	wait_event(nn->nn_sc_wq, o2net_tx_can_proceed(nn, &sc, &ret));
 	if (ret)
 		goto out;
 
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index c5752305627..b358f3bf896 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2900,6 +2900,8 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 	alloc = ocfs2_clusters_for_bytes(sb, bytes);
 	dx_alloc = 0;
 
+	down_write(&oi->ip_alloc_sem);
+
 	if (ocfs2_supports_indexed_dirs(osb)) {
 		credits += ocfs2_add_dir_index_credits(sb);
 
@@ -2940,8 +2942,6 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 		goto out;
 	}
 
-	down_write(&oi->ip_alloc_sem);
-
 	/*
 	 * Prepare for worst case allocation scenario of two separate
 	 * extents in the unindexed tree.
@@ -2953,7 +2953,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 	if (IS_ERR(handle)) {
 		ret = PTR_ERR(handle);
 		mlog_errno(ret);
-		goto out_sem;
+		goto out;
 	}
 
 	if (vfs_dq_alloc_space_nodirty(dir,
@@ -3172,10 +3172,8 @@ out_commit:
 
 	ocfs2_commit_trans(osb, handle);
 
-out_sem:
-	up_write(&oi->ip_alloc_sem);
-
 out:
+	up_write(&oi->ip_alloc_sem);
 	if (data_ac)
 		ocfs2_free_alloc_context(data_ac);
 	if (meta_ac)
@@ -3322,11 +3320,15 @@ static int ocfs2_extend_dir(struct ocfs2_super *osb,
 		brelse(new_bh);
 		new_bh = NULL;
 
+		down_write(&OCFS2_I(dir)->ip_alloc_sem);
+		drop_alloc_sem = 1;
 		dir_i_size = i_size_read(dir);
 		credits = OCFS2_SIMPLE_DIR_EXTEND_CREDITS;
 		goto do_extend;
 	}
 
+	down_write(&OCFS2_I(dir)->ip_alloc_sem);
+	drop_alloc_sem = 1;
 	dir_i_size = i_size_read(dir);
 	mlog(0, "extending dir %llu (i_size = %lld)\n",
 	     (unsigned long long)OCFS2_I(dir)->ip_blkno, dir_i_size);
@@ -3370,9 +3372,6 @@ do_extend:
 		credits++; /* For attaching the new dirent block to the
 			    * dx_root */
 
-	down_write(&OCFS2_I(dir)->ip_alloc_sem);
-	drop_alloc_sem = 1;
-
 	handle = ocfs2_start_trans(osb, credits);
 	if (IS_ERR(handle)) {
 		status = PTR_ERR(handle);
@@ -3435,10 +3434,10 @@ bail_bh:
 	*new_de_bh = new_bh;
 	get_bh(*new_de_bh);
 bail:
-	if (drop_alloc_sem)
-		up_write(&OCFS2_I(dir)->ip_alloc_sem);
 	if (handle)
 		ocfs2_commit_trans(osb, handle);
+	if (drop_alloc_sem)
+		up_write(&OCFS2_I(dir)->ip_alloc_sem);
 
 	if (data_ac)
 		ocfs2_free_alloc_context(data_ac);
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index e15fc7d5082..6cdeaa76f27 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -248,6 +248,10 @@ static struct ocfs2_lock_res_ops ocfs2_nfs_sync_lops = {
 	.flags		= 0,
 };
 
+static struct ocfs2_lock_res_ops ocfs2_orphan_scan_lops = {
+	.flags		= LOCK_TYPE_REQUIRES_REFRESH|LOCK_TYPE_USES_LVB,
+};
+
 static struct ocfs2_lock_res_ops ocfs2_dentry_lops = {
 	.get_osb	= ocfs2_get_dentry_osb,
 	.post_unlock	= ocfs2_dentry_post_unlock,
@@ -637,6 +641,19 @@ static void ocfs2_nfs_sync_lock_res_init(struct ocfs2_lock_res *res,
 				   &ocfs2_nfs_sync_lops, osb);
 }
 
+static void ocfs2_orphan_scan_lock_res_init(struct ocfs2_lock_res *res,
+					    struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan_lvb *lvb;
+
+	ocfs2_lock_res_init_once(res);
+	ocfs2_build_lock_name(OCFS2_LOCK_TYPE_ORPHAN_SCAN, 0, 0, res->l_name);
+	ocfs2_lock_res_init_common(osb, res, OCFS2_LOCK_TYPE_ORPHAN_SCAN,
+				   &ocfs2_orphan_scan_lops, osb);
+	lvb = ocfs2_dlm_lvb(&res->l_lksb);
+	lvb->lvb_version = OCFS2_ORPHAN_LVB_VERSION;
+}
+
 void ocfs2_file_lock_res_init(struct ocfs2_lock_res *lockres,
 			      struct ocfs2_file_private *fp)
 {
@@ -2352,6 +2369,37 @@ void ocfs2_inode_unlock(struct inode *inode,
 	mlog_exit_void();
 }
 
+int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno, int ex)
+{
+	struct ocfs2_lock_res *lockres;
+	struct ocfs2_orphan_scan_lvb *lvb;
+	int level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
+	int status = 0;
+
+	lockres = &osb->osb_orphan_scan.os_lockres;
+	status = ocfs2_cluster_lock(osb, lockres, level, 0, 0);
+	if (status < 0)
+		return status;
+
+	lvb = ocfs2_dlm_lvb(&lockres->l_lksb);
+	if (lvb->lvb_version == OCFS2_ORPHAN_LVB_VERSION)
+		*seqno = be32_to_cpu(lvb->lvb_os_seqno);
+	return status;
+}
+
+void ocfs2_orphan_scan_unlock(struct ocfs2_super *osb, u32 seqno, int ex)
+{
+	struct ocfs2_lock_res *lockres;
+	struct ocfs2_orphan_scan_lvb *lvb;
+	int level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
+
+	lockres = &osb->osb_orphan_scan.os_lockres;
+	lvb = ocfs2_dlm_lvb(&lockres->l_lksb);
+	lvb->lvb_version = OCFS2_ORPHAN_LVB_VERSION;
+	lvb->lvb_os_seqno = cpu_to_be32(seqno);
+	ocfs2_cluster_unlock(osb, lockres, level);
+}
+
 int ocfs2_super_lock(struct ocfs2_super *osb,
 		     int ex)
 {
@@ -2842,6 +2890,7 @@ local:
 	ocfs2_super_lock_res_init(&osb->osb_super_lockres, osb);
 	ocfs2_rename_lock_res_init(&osb->osb_rename_lockres, osb);
 	ocfs2_nfs_sync_lock_res_init(&osb->osb_nfs_sync_lockres, osb);
+	ocfs2_orphan_scan_lock_res_init(&osb->osb_orphan_scan.os_lockres, osb);
 
 	osb->cconn = conn;
 
@@ -2878,6 +2927,7 @@ void ocfs2_dlm_shutdown(struct ocfs2_super *osb,
 	ocfs2_lock_res_free(&osb->osb_super_lockres);
 	ocfs2_lock_res_free(&osb->osb_rename_lockres);
 	ocfs2_lock_res_free(&osb->osb_nfs_sync_lockres);
+	ocfs2_lock_res_free(&osb->osb_orphan_scan.os_lockres);
 
 	ocfs2_cluster_disconnect(osb->cconn, hangup_pending);
 	osb->cconn = NULL;
@@ -3061,6 +3111,7 @@ static void ocfs2_drop_osb_locks(struct ocfs2_super *osb)
 	ocfs2_simple_drop_lockres(osb, &osb->osb_super_lockres);
 	ocfs2_simple_drop_lockres(osb, &osb->osb_rename_lockres);
 	ocfs2_simple_drop_lockres(osb, &osb->osb_nfs_sync_lockres);
+	ocfs2_simple_drop_lockres(osb, &osb->osb_orphan_scan.os_lockres);
 }
 
 int ocfs2_drop_inode_locks(struct inode *inode)
diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
index e1fd5721cd7..31b90d7b8f5 100644
--- a/fs/ocfs2/dlmglue.h
+++ b/fs/ocfs2/dlmglue.h
@@ -62,6 +62,14 @@ struct ocfs2_qinfo_lvb {
 	__be32	lvb_free_entry;
 };
 
+#define OCFS2_ORPHAN_LVB_VERSION 1
+
+struct ocfs2_orphan_scan_lvb {
+	__u8	lvb_version;
+	__u8	lvb_reserved[3];
+	__be32	lvb_os_seqno;
+};
+
 /* ocfs2_inode_lock_full() 'arg_flags' flags */
 /* don't wait on recovery. */
 #define OCFS2_META_LOCK_RECOVERY	(0x01)
@@ -113,6 +121,9 @@ int ocfs2_super_lock(struct ocfs2_super *osb,
 		     int ex);
 void ocfs2_super_unlock(struct ocfs2_super *osb,
 			int ex);
+int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno, int ex);
+void ocfs2_orphan_scan_unlock(struct ocfs2_super *osb, u32 seqno, int ex);
+
 int ocfs2_rename_lock(struct ocfs2_super *osb);
 void ocfs2_rename_unlock(struct ocfs2_super *osb);
 int ocfs2_nfs_sync_lock(struct ocfs2_super *osb, int ex);
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index c2a87c885b7..07267e0da90 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -187,6 +187,9 @@ static int ocfs2_sync_file(struct file *file,
 	if (err)
 		goto bail;
 
+	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+		goto bail;
+
 	journal = osb->journal->j_journal;
 	err = jbd2_journal_force_commit(journal);
 
@@ -894,9 +897,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 	struct ocfs2_super *osb = OCFS2_SB(sb);
 	struct buffer_head *bh = NULL;
 	handle_t *handle = NULL;
-	int locked[MAXQUOTAS] = {0, 0};
-	int credits, qtype;
-	struct ocfs2_mem_dqinfo *oinfo;
+	int qtype;
+	struct dquot *transfer_from[MAXQUOTAS] = { };
+	struct dquot *transfer_to[MAXQUOTAS] = { };
 
 	mlog_entry("(0x%p, '%.*s')\n", dentry,
 	           dentry->d_name.len, dentry->d_name.name);
@@ -969,30 +972,37 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 
 	if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
 	    (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
-		credits = OCFS2_INODE_UPDATE_CREDITS;
+		/*
+		 * Gather pointers to quota structures so that allocation /
+		 * freeing of quota structures happens here and not inside
+		 * vfs_dq_transfer() where we have problems with lock ordering
+		 */
 		if (attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid
 		    && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
 		    OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) {
-			oinfo = sb_dqinfo(sb, USRQUOTA)->dqi_priv;
-			status = ocfs2_lock_global_qf(oinfo, 1);
-			if (status < 0)
+			transfer_to[USRQUOTA] = dqget(sb, attr->ia_uid,
+						      USRQUOTA);
+			transfer_from[USRQUOTA] = dqget(sb, inode->i_uid,
+							USRQUOTA);
+			if (!transfer_to[USRQUOTA] || !transfer_from[USRQUOTA]) {
+				status = -ESRCH;
 				goto bail_unlock;
-			credits += ocfs2_calc_qinit_credits(sb, USRQUOTA) +
-				ocfs2_calc_qdel_credits(sb, USRQUOTA);
-			locked[USRQUOTA] = 1;
+			}
 		}
 		if (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid
 		    && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
 		    OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) {
-			oinfo = sb_dqinfo(sb, GRPQUOTA)->dqi_priv;
-			status = ocfs2_lock_global_qf(oinfo, 1);
-			if (status < 0)
+			transfer_to[GRPQUOTA] = dqget(sb, attr->ia_gid,
+						      GRPQUOTA);
+			transfer_from[GRPQUOTA] = dqget(sb, inode->i_gid,
+							GRPQUOTA);
+			if (!transfer_to[GRPQUOTA] || !transfer_from[GRPQUOTA]) {
+				status = -ESRCH;
 				goto bail_unlock;
-			credits += ocfs2_calc_qinit_credits(sb, GRPQUOTA) +
-				   ocfs2_calc_qdel_credits(sb, GRPQUOTA);
-			locked[GRPQUOTA] = 1;
+			}
 		}
-		handle = ocfs2_start_trans(osb, credits);
+		handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS +
+					   2 * ocfs2_quota_trans_credits(sb));
 		if (IS_ERR(handle)) {
 			status = PTR_ERR(handle);
 			mlog_errno(status);
@@ -1030,12 +1040,6 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 bail_commit:
 	ocfs2_commit_trans(osb, handle);
 bail_unlock:
-	for (qtype = 0; qtype < MAXQUOTAS; qtype++) {
-		if (!locked[qtype])
-			continue;
-		oinfo = sb_dqinfo(sb, qtype)->dqi_priv;
-		ocfs2_unlock_global_qf(oinfo, 1);
-	}
 	ocfs2_inode_unlock(inode, 1);
 bail_unlock_rw:
 	if (size_change)
@@ -1043,6 +1047,12 @@ bail_unlock_rw:
 bail:
 	brelse(bh);
 
+	/* Release quota pointers in case we acquired them */
+	for (qtype = 0; qtype < MAXQUOTAS; qtype++) {
+		dqput(transfer_to[qtype]);
+		dqput(transfer_from[qtype]);
+	}
+
 	if (!status && attr->ia_valid & ATTR_MODE) {
 		status = ocfs2_acl_chmod(inode);
 		if (status < 0)
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index a20a0f1e37f..4a3b9e6b31a 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -28,6 +28,8 @@
 #include <linux/slab.h>
 #include <linux/highmem.h>
 #include <linux/kthread.h>
+#include <linux/time.h>
+#include <linux/random.h>
 
 #define MLOG_MASK_PREFIX ML_JOURNAL
 #include <cluster/masklog.h>
@@ -52,6 +54,8 @@
 
 DEFINE_SPINLOCK(trans_inc_lock);
 
+#define ORPHAN_SCAN_SCHEDULE_TIMEOUT 300000
+
 static int ocfs2_force_read_journal(struct inode *inode);
 static int ocfs2_recover_node(struct ocfs2_super *osb,
 			      int node_num, int slot_num);
@@ -1841,6 +1845,113 @@ bail:
 	return status;
 }
 
+/*
+ * Scan timer should get fired every ORPHAN_SCAN_SCHEDULE_TIMEOUT. Add some
+ * randomness to the timeout to minimize multple nodes firing the timer at the
+ * same time.
+ */
+static inline unsigned long ocfs2_orphan_scan_timeout(void)
+{
+	unsigned long time;
+
+	get_random_bytes(&time, sizeof(time));
+	time = ORPHAN_SCAN_SCHEDULE_TIMEOUT + (time % 5000);
+	return msecs_to_jiffies(time);
+}
+
+/*
+ * ocfs2_queue_orphan_scan calls ocfs2_queue_recovery_completion for
+ * every slot, queuing a recovery of the slot on the ocfs2_wq thread. This
+ * is done to catch any orphans that are left over in orphan directories.
+ *
+ * ocfs2_queue_orphan_scan gets called every ORPHAN_SCAN_SCHEDULE_TIMEOUT
+ * seconds.  It gets an EX lock on os_lockres and checks sequence number
+ * stored in LVB. If the sequence number has changed, it means some other
+ * node has done the scan.  This node skips the scan and tracks the
+ * sequence number.  If the sequence number didn't change, it means a scan
+ * hasn't happened.  The node queues a scan and increments the
+ * sequence number in the LVB.
+ */
+void ocfs2_queue_orphan_scan(struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan *os;
+	int status, i;
+	u32 seqno = 0;
+
+	os = &osb->osb_orphan_scan;
+
+	status = ocfs2_orphan_scan_lock(osb, &seqno, DLM_LOCK_EX);
+	if (status < 0) {
+		if (status != -EAGAIN)
+			mlog_errno(status);
+		goto out;
+	}
+
+	if (os->os_seqno != seqno) {
+		os->os_seqno = seqno;
+		goto unlock;
+	}
+
+	for (i = 0; i < osb->max_slots; i++)
+		ocfs2_queue_recovery_completion(osb->journal, i, NULL, NULL,
+						NULL);
+	/*
+	 * We queued a recovery on orphan slots, increment the sequence
+	 * number and update LVB so other node will skip the scan for a while
+	 */
+	seqno++;
+	os->os_count++;
+	os->os_scantime = CURRENT_TIME;
+unlock:
+	ocfs2_orphan_scan_unlock(osb, seqno, DLM_LOCK_EX);
+out:
+	return;
+}
+
+/* Worker task that gets fired every ORPHAN_SCAN_SCHEDULE_TIMEOUT millsec */
+void ocfs2_orphan_scan_work(struct work_struct *work)
+{
+	struct ocfs2_orphan_scan *os;
+	struct ocfs2_super *osb;
+
+	os = container_of(work, struct ocfs2_orphan_scan,
+			  os_orphan_scan_work.work);
+	osb = os->os_osb;
+
+	mutex_lock(&os->os_lock);
+	ocfs2_queue_orphan_scan(osb);
+	schedule_delayed_work(&os->os_orphan_scan_work,
+			      ocfs2_orphan_scan_timeout());
+	mutex_unlock(&os->os_lock);
+}
+
+void ocfs2_orphan_scan_stop(struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan *os;
+
+	os = &osb->osb_orphan_scan;
+	mutex_lock(&os->os_lock);
+	cancel_delayed_work(&os->os_orphan_scan_work);
+	mutex_unlock(&os->os_lock);
+}
+
+int ocfs2_orphan_scan_init(struct ocfs2_super *osb)
+{
+	struct ocfs2_orphan_scan *os;
+
+	os = &osb->osb_orphan_scan;
+	os->os_osb = osb;
+	os->os_count = 0;
+	os->os_scantime = CURRENT_TIME;
+	mutex_init(&os->os_lock);
+
+	INIT_DELAYED_WORK(&os->os_orphan_scan_work,
+			  ocfs2_orphan_scan_work);
+	schedule_delayed_work(&os->os_orphan_scan_work,
+			      ocfs2_orphan_scan_timeout());
+	return 0;
+}
+
 struct ocfs2_orphan_filldir_priv {
 	struct inode		*head;
 	struct ocfs2_super	*osb;
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index eb7b76331eb..61045eeb3f6 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -144,6 +144,10 @@ static inline void ocfs2_inode_set_new(struct ocfs2_super *osb,
 }
 
 /* Exported only for the journal struct init code in super.c. Do not call. */
+int ocfs2_orphan_scan_init(struct ocfs2_super *osb);
+void ocfs2_orphan_scan_stop(struct ocfs2_super *osb);
+void ocfs2_orphan_scan_exit(struct ocfs2_super *osb);
+
 void ocfs2_complete_recovery(struct work_struct *work);
 void ocfs2_wait_for_recovery(struct ocfs2_super *osb);
 
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 1386281950d..18c1d9ec1c9 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -47,6 +47,9 @@
 #include "ocfs2_fs.h"
 #include "ocfs2_lockid.h"
 
+/* For struct ocfs2_blockcheck_stats */
+#include "blockcheck.h"
+
 /* Most user visible OCFS2 inodes will have very few pieces of
  * metadata, but larger files (including bitmaps, etc) must be taken
  * into account when designing an access scheme. We allow a small
@@ -151,6 +154,16 @@ struct ocfs2_lock_res {
 #endif
 };
 
+struct ocfs2_orphan_scan {
+	struct mutex 		os_lock;
+	struct ocfs2_super 	*os_osb;
+	struct ocfs2_lock_res 	os_lockres;     /* lock to synchronize scans */
+	struct delayed_work 	os_orphan_scan_work;
+	struct timespec		os_scantime;  /* time this node ran the scan */
+	u32			os_count;      /* tracks node specific scans */
+	u32  			os_seqno;       /* tracks cluster wide scans */
+};
+
 struct ocfs2_dlm_debug {
 	struct kref d_refcnt;
 	struct dentry *d_locking_state;
@@ -295,6 +308,7 @@ struct ocfs2_super
 	struct ocfs2_dinode *local_alloc_copy;
 	struct ocfs2_quota_recovery *quota_rec;
 
+	struct ocfs2_blockcheck_stats osb_ecc_stats;
 	struct ocfs2_alloc_stats alloc_stats;
 	char dev_str[20];		/* "major,minor" of the device */
 
@@ -341,6 +355,8 @@ struct ocfs2_super
 	unsigned int			*osb_orphan_wipes;
 	wait_queue_head_t		osb_wipe_event;
 
+	struct ocfs2_orphan_scan	osb_orphan_scan;
+
 	/* used to protect metaecc calculation check of xattr. */
 	spinlock_t osb_xattr_lock;
 
diff --git a/fs/ocfs2/ocfs2_lockid.h b/fs/ocfs2/ocfs2_lockid.h
index a53ce87481b..fcdba091af3 100644
--- a/fs/ocfs2/ocfs2_lockid.h
+++ b/fs/ocfs2/ocfs2_lockid.h
@@ -48,6 +48,7 @@ enum ocfs2_lock_type {
 	OCFS2_LOCK_TYPE_FLOCK,
 	OCFS2_LOCK_TYPE_QINFO,
 	OCFS2_LOCK_TYPE_NFS_SYNC,
+	OCFS2_LOCK_TYPE_ORPHAN_SCAN,
 	OCFS2_NUM_LOCK_TYPES
 };
 
@@ -85,6 +86,9 @@ static inline char ocfs2_lock_type_char(enum ocfs2_lock_type type)
 		case OCFS2_LOCK_TYPE_NFS_SYNC:
 			c = 'Y';
 			break;
+		case OCFS2_LOCK_TYPE_ORPHAN_SCAN:
+			c = 'P';
+			break;
 		default:
 			c = '\0';
 	}
@@ -104,6 +108,7 @@ static char *ocfs2_lock_type_strings[] = {
 	[OCFS2_LOCK_TYPE_OPEN] = "Open",
 	[OCFS2_LOCK_TYPE_FLOCK] = "Flock",
 	[OCFS2_LOCK_TYPE_QINFO] = "Quota",
+	[OCFS2_LOCK_TYPE_ORPHAN_SCAN] = "OrphanScan",
 };
 
 static inline const char *ocfs2_lock_type_string(enum ocfs2_lock_type type)
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 1ed0f7c8686..edfa60cd155 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -421,6 +421,7 @@ int ocfs2_global_read_dquot(struct dquot *dquot)
 	OCFS2_DQUOT(dquot)->dq_originodes = dquot->dq_dqb.dqb_curinodes;
 	if (!dquot->dq_off) {	/* No real quota entry? */
 		/* Upgrade to exclusive lock for allocation */
+		ocfs2_qinfo_unlock(info, 0);
 		err = ocfs2_qinfo_lock(info, 1);
 		if (err < 0)
 			goto out_qlock;
@@ -435,7 +436,8 @@ int ocfs2_global_read_dquot(struct dquot *dquot)
 out_qlock:
 	if (ex)
 		ocfs2_qinfo_unlock(info, 1);
-	ocfs2_qinfo_unlock(info, 0);
+	else
+		ocfs2_qinfo_unlock(info, 0);
 out:
 	if (err < 0)
 		mlog_errno(err);
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 07deec5e972..5a460fa8255 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -444,10 +444,6 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode,
 
 	mlog_entry("ino=%lu type=%u", (unsigned long)lqinode->i_ino, type);
 
-	status = ocfs2_lock_global_qf(oinfo, 1);
-	if (status < 0)
-		goto out;
-
 	list_for_each_entry_safe(rchunk, next, &(rec->r_list[type]), rc_list) {
 		chunk = rchunk->rc_chunk;
 		hbh = NULL;
@@ -480,12 +476,18 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode,
 				     type);
 				goto out_put_bh;
 			}
+			status = ocfs2_lock_global_qf(oinfo, 1);
+			if (status < 0) {
+				mlog_errno(status);
+				goto out_put_dquot;
+			}
+
 			handle = ocfs2_start_trans(OCFS2_SB(sb),
 						   OCFS2_QSYNC_CREDITS);
 			if (IS_ERR(handle)) {
 				status = PTR_ERR(handle);
 				mlog_errno(status);
-				goto out_put_dquot;
+				goto out_drop_lock;
 			}
 			mutex_lock(&sb_dqopt(sb)->dqio_mutex);
 			spin_lock(&dq_data_lock);
@@ -523,6 +525,8 @@ static int ocfs2_recover_local_quota_file(struct inode *lqinode,
 out_commit:
 			mutex_unlock(&sb_dqopt(sb)->dqio_mutex);
 			ocfs2_commit_trans(OCFS2_SB(sb), handle);
+out_drop_lock:
+			ocfs2_unlock_global_qf(oinfo, 1);
 out_put_dquot:
 			dqput(dquot);
 out_put_bh:
@@ -537,8 +541,6 @@ out_put_bh:
 		if (status < 0)
 			break;
 	}
-	ocfs2_unlock_global_qf(oinfo, 1);
-out:
 	if (status < 0)
 		free_recovery_list(&(rec->r_list[type]));
 	mlog_exit(status);
@@ -655,6 +657,9 @@ static int ocfs2_local_read_info(struct super_block *sb, int type)
 	struct ocfs2_quota_recovery *rec;
 	int locked = 0;
 
+	/* We don't need the lock and we have to acquire quota file locks
+	 * which will later depend on this lock */
+	mutex_unlock(&sb_dqopt(sb)->dqio_mutex);
 	info->dqi_maxblimit = 0x7fffffffffffffffLL;
 	info->dqi_maxilimit = 0x7fffffffffffffffLL;
 	oinfo = kmalloc(sizeof(struct ocfs2_mem_dqinfo), GFP_NOFS);
@@ -733,6 +738,7 @@ static int ocfs2_local_read_info(struct super_block *sb, int type)
 		goto out_err;
 	}
 
+	mutex_lock(&sb_dqopt(sb)->dqio_mutex);
 	return 0;
 out_err:
 	if (oinfo) {
@@ -746,6 +752,7 @@ out_err:
 		kfree(oinfo);
 	}
 	brelse(bh);
+	mutex_lock(&sb_dqopt(sb)->dqio_mutex);
 	return -1;
 }
 
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 201b40a441f..d33767f17ba 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -119,10 +119,12 @@ static void ocfs2_release_system_inodes(struct ocfs2_super *osb);
 static int ocfs2_check_volume(struct ocfs2_super *osb);
 static int ocfs2_verify_volume(struct ocfs2_dinode *di,
 			       struct buffer_head *bh,
-			       u32 sectsize);
+			       u32 sectsize,
+			       struct ocfs2_blockcheck_stats *stats);
 static int ocfs2_initialize_super(struct super_block *sb,
 				  struct buffer_head *bh,
-				  int sector_size);
+				  int sector_size,
+				  struct ocfs2_blockcheck_stats *stats);
 static int ocfs2_get_sector(struct super_block *sb,
 			    struct buffer_head **bh,
 			    int block,
@@ -207,6 +209,7 @@ static int ocfs2_osb_dump(struct ocfs2_super *osb, char *buf, int len)
 	int i;
 	struct ocfs2_cluster_connection *cconn = osb->cconn;
 	struct ocfs2_recovery_map *rm = osb->recovery_map;
+	struct ocfs2_orphan_scan *os;
 
 	out += snprintf(buf + out, len - out,
 			"%10s => Id: %-s  Uuid: %-s  Gen: 0x%X  Label: %-s\n",
@@ -308,6 +311,13 @@ static int ocfs2_osb_dump(struct ocfs2_super *osb, char *buf, int len)
 				i, osb->slot_recovery_generations[i]);
 	}
 
+	os = &osb->osb_orphan_scan;
+	out += snprintf(buf + out, len - out, "Orphan Scan=> ");
+	out += snprintf(buf + out, len - out, "Local: %u  Global: %u ",
+			os->os_count, os->os_seqno);
+	out += snprintf(buf + out, len - out, " Last Scan: %lu seconds ago\n",
+			(get_seconds() - os->os_scantime.tv_sec));
+
 	return out;
 }
 
@@ -693,7 +703,8 @@ out:
 
 static int ocfs2_sb_probe(struct super_block *sb,
 			  struct buffer_head **bh,
-			  int *sector_size)
+			  int *sector_size,
+			  struct ocfs2_blockcheck_stats *stats)
 {
 	int status, tmpstat;
 	struct ocfs1_vol_disk_hdr *hdr;
@@ -759,7 +770,8 @@ static int ocfs2_sb_probe(struct super_block *sb,
 			goto bail;
 		}
 		di = (struct ocfs2_dinode *) (*bh)->b_data;
-		status = ocfs2_verify_volume(di, *bh, blksize);
+		memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats));
+		status = ocfs2_verify_volume(di, *bh, blksize, stats);
 		if (status >= 0)
 			goto bail;
 		brelse(*bh);
@@ -965,6 +977,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 	struct ocfs2_super *osb = NULL;
 	struct buffer_head *bh = NULL;
 	char nodestr[8];
+	struct ocfs2_blockcheck_stats stats;
 
 	mlog_entry("%p, %p, %i", sb, data, silent);
 
@@ -974,13 +987,13 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	/* probe for superblock */
-	status = ocfs2_sb_probe(sb, &bh, &sector_size);
+	status = ocfs2_sb_probe(sb, &bh, &sector_size, &stats);
 	if (status < 0) {
 		mlog(ML_ERROR, "superblock probe failed!\n");
 		goto read_super_error;
 	}
 
-	status = ocfs2_initialize_super(sb, bh, sector_size);
+	status = ocfs2_initialize_super(sb, bh, sector_size, &stats);
 	osb = OCFS2_SB(sb);
 	if (status < 0) {
 		mlog_errno(status);
@@ -1090,6 +1103,18 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
 		goto read_super_error;
 	}
 
+	if (ocfs2_meta_ecc(osb)) {
+		status = ocfs2_blockcheck_stats_debugfs_install(
+						&osb->osb_ecc_stats,
+						osb->osb_debug_root);
+		if (status) {
+			mlog(ML_ERROR,
+			     "Unable to create blockcheck statistics "
+			     "files\n");
+			goto read_super_error;
+		}
+	}
+
 	status = ocfs2_mount_volume(sb);
 	if (osb->root_inode)
 		inode = igrab(osb->root_inode);
@@ -1760,13 +1785,8 @@ static int ocfs2_mount_volume(struct super_block *sb)
 	}
 
 	status = ocfs2_truncate_log_init(osb);
-	if (status < 0) {
+	if (status < 0)
 		mlog_errno(status);
-		goto leave;
-	}
-
-	if (ocfs2_mount_local(osb))
-		goto leave;
 
 leave:
 	if (unlock_super)
@@ -1796,6 +1816,8 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err)
 
 	ocfs2_truncate_log_shutdown(osb);
 
+	ocfs2_orphan_scan_stop(osb);
+
 	/* This will disable recovery and flush any recovery work. */
 	ocfs2_recovery_exit(osb);
 
@@ -1833,6 +1855,7 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err)
 	if (osb->cconn)
 		ocfs2_dlm_shutdown(osb, hangup_needed);
 
+	ocfs2_blockcheck_stats_debugfs_remove(&osb->osb_ecc_stats);
 	debugfs_remove(osb->osb_debug_root);
 
 	if (hangup_needed)
@@ -1880,7 +1903,8 @@ static int ocfs2_setup_osb_uuid(struct ocfs2_super *osb, const unsigned char *uu
 
 static int ocfs2_initialize_super(struct super_block *sb,
 				  struct buffer_head *bh,
-				  int sector_size)
+				  int sector_size,
+				  struct ocfs2_blockcheck_stats *stats)
 {
 	int status;
 	int i, cbits, bbits;
@@ -1939,6 +1963,9 @@ static int ocfs2_initialize_super(struct super_block *sb,
 	atomic_set(&osb->alloc_stats.bg_allocs, 0);
 	atomic_set(&osb->alloc_stats.bg_extends, 0);
 
+	/* Copy the blockcheck stats from the superblock probe */
+	osb->osb_ecc_stats = *stats;
+
 	ocfs2_init_node_maps(osb);
 
 	snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u",
@@ -1951,6 +1978,13 @@ static int ocfs2_initialize_super(struct super_block *sb,
 		goto bail;
 	}
 
+	status = ocfs2_orphan_scan_init(osb);
+	if (status) {
+		mlog(ML_ERROR, "Unable to initialize delayed orphan scan\n");
+		mlog_errno(status);
+		goto bail;
+	}
+
 	init_waitqueue_head(&osb->checkpoint_event);
 	atomic_set(&osb->needs_checkpoint, 0);
 
@@ -2169,7 +2203,8 @@ bail:
  */
 static int ocfs2_verify_volume(struct ocfs2_dinode *di,
 			       struct buffer_head *bh,
-			       u32 blksz)
+			       u32 blksz,
+			       struct ocfs2_blockcheck_stats *stats)
 {
 	int status = -EAGAIN;
 
@@ -2182,7 +2217,8 @@ static int ocfs2_verify_volume(struct ocfs2_dinode *di,
 		    OCFS2_FEATURE_INCOMPAT_META_ECC) {
 			status = ocfs2_block_check_validate(bh->b_data,
 							    bh->b_size,
-							    &di->i_check);
+							    &di->i_check,
+							    stats);
 			if (status)
 				goto out;
 		}
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 15631019dc6..ba320e25074 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -3154,7 +3154,7 @@ static int ocfs2_iterate_xattr_buckets(struct inode *inode,
 		     le32_to_cpu(bucket_xh(bucket)->xh_entries[0].xe_name_hash));
 		if (func) {
 			ret = func(inode, bucket, para);
-			if (ret)
+			if (ret && ret != -ERANGE)
 				mlog_errno(ret);
 			/* Fall through to bucket_relse() */
 		}
@@ -3261,7 +3261,8 @@ static int ocfs2_xattr_tree_list_index_block(struct inode *inode,
 						  ocfs2_list_xattr_bucket,
 						  &xl);
 		if (ret) {
-			mlog_errno(ret);
+			if (ret != -ERANGE)
+				mlog_errno(ret);
 			goto out;
 		}
 
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 1539e630c47..3ce5ae9e3d2 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1006,7 +1006,12 @@ static ssize_t oom_adjust_read(struct file *file, char __user *buf,
 
 	if (!task)
 		return -ESRCH;
-	oom_adjust = task->oomkilladj;
+	task_lock(task);
+	if (task->mm)
+		oom_adjust = task->mm->oom_adj;
+	else
+		oom_adjust = OOM_DISABLE;
+	task_unlock(task);
 	put_task_struct(task);
 
 	len = snprintf(buffer, sizeof(buffer), "%i\n", oom_adjust);
@@ -1035,11 +1040,19 @@ static ssize_t oom_adjust_write(struct file *file, const char __user *buf,
 	task = get_proc_task(file->f_path.dentry->d_inode);
 	if (!task)
 		return -ESRCH;
-	if (oom_adjust < task->oomkilladj && !capable(CAP_SYS_RESOURCE)) {
+	task_lock(task);
+	if (!task->mm) {
+		task_unlock(task);
+		put_task_struct(task);
+		return -EINVAL;
+	}
+	if (oom_adjust < task->mm->oom_adj && !capable(CAP_SYS_RESOURCE)) {
+		task_unlock(task);
 		put_task_struct(task);
 		return -EACCES;
 	}
-	task->oomkilladj = oom_adjust;
+	task->mm->oom_adj = oom_adjust;
+	task_unlock(task);
 	put_task_struct(task);
 	if (end - buffer == 0)
 		return -EIO;
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index c6b0302af4c..d5c410d47fa 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -64,10 +64,8 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
 		"Inactive(anon): %8lu kB\n"
 		"Active(file):   %8lu kB\n"
 		"Inactive(file): %8lu kB\n"
-#ifdef CONFIG_UNEVICTABLE_LRU
 		"Unevictable:    %8lu kB\n"
 		"Mlocked:        %8lu kB\n"
-#endif
 #ifdef CONFIG_HIGHMEM
 		"HighTotal:      %8lu kB\n"
 		"HighFree:       %8lu kB\n"
@@ -109,10 +107,8 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
 		K(pages[LRU_INACTIVE_ANON]),
 		K(pages[LRU_ACTIVE_FILE]),
 		K(pages[LRU_INACTIVE_FILE]),
-#ifdef CONFIG_UNEVICTABLE_LRU
 		K(pages[LRU_UNEVICTABLE]),
 		K(global_page_state(NR_MLOCK)),
-#endif
 #ifdef CONFIG_HIGHMEM
 		K(i.totalhigh),
 		K(i.freehigh),
diff --git a/fs/proc/page.c b/fs/proc/page.c
index e9983837d08..2707c6c7a20 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -6,11 +6,13 @@
 #include <linux/mmzone.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/hugetlb.h>
 #include <asm/uaccess.h>
 #include "internal.h"
 
 #define KPMSIZE sizeof(u64)
 #define KPMMASK (KPMSIZE - 1)
+
 /* /proc/kpagecount - an array exposing page counts
  *
  * Each entry is a u64 representing the corresponding
@@ -32,20 +34,22 @@ static ssize_t kpagecount_read(struct file *file, char __user *buf,
 		return -EINVAL;
 
 	while (count > 0) {
-		ppage = NULL;
 		if (pfn_valid(pfn))
 			ppage = pfn_to_page(pfn);
-		pfn++;
+		else
+			ppage = NULL;
 		if (!ppage)
 			pcount = 0;
 		else
 			pcount = page_mapcount(ppage);
 
-		if (put_user(pcount, out++)) {
+		if (put_user(pcount, out)) {
 			ret = -EFAULT;
 			break;
 		}
 
+		pfn++;
+		out++;
 		count -= KPMSIZE;
 	}
 
@@ -68,19 +72,122 @@ static const struct file_operations proc_kpagecount_operations = {
 
 /* These macros are used to decouple internal flags from exported ones */
 
-#define KPF_LOCKED     0
-#define KPF_ERROR      1
-#define KPF_REFERENCED 2
-#define KPF_UPTODATE   3
-#define KPF_DIRTY      4
-#define KPF_LRU        5
-#define KPF_ACTIVE     6
-#define KPF_SLAB       7
-#define KPF_WRITEBACK  8
-#define KPF_RECLAIM    9
-#define KPF_BUDDY     10
+#define KPF_LOCKED		0
+#define KPF_ERROR		1
+#define KPF_REFERENCED		2
+#define KPF_UPTODATE		3
+#define KPF_DIRTY		4
+#define KPF_LRU			5
+#define KPF_ACTIVE		6
+#define KPF_SLAB		7
+#define KPF_WRITEBACK		8
+#define KPF_RECLAIM		9
+#define KPF_BUDDY		10
+
+/* 11-20: new additions in 2.6.31 */
+#define KPF_MMAP		11
+#define KPF_ANON		12
+#define KPF_SWAPCACHE		13
+#define KPF_SWAPBACKED		14
+#define KPF_COMPOUND_HEAD	15
+#define KPF_COMPOUND_TAIL	16
+#define KPF_HUGE		17
+#define KPF_UNEVICTABLE		18
+#define KPF_NOPAGE		20
+
+/* kernel hacking assistances
+ * WARNING: subject to change, never rely on them!
+ */
+#define KPF_RESERVED		32
+#define KPF_MLOCKED		33
+#define KPF_MAPPEDTODISK	34
+#define KPF_PRIVATE		35
+#define KPF_PRIVATE_2		36
+#define KPF_OWNER_PRIVATE	37
+#define KPF_ARCH		38
+#define KPF_UNCACHED		39
+
+static inline u64 kpf_copy_bit(u64 kflags, int ubit, int kbit)
+{
+	return ((kflags >> kbit) & 1) << ubit;
+}
 
-#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
+static u64 get_uflags(struct page *page)
+{
+	u64 k;
+	u64 u;
+
+	/*
+	 * pseudo flag: KPF_NOPAGE
+	 * it differentiates a memory hole from a page with no flags
+	 */
+	if (!page)
+		return 1 << KPF_NOPAGE;
+
+	k = page->flags;
+	u = 0;
+
+	/*
+	 * pseudo flags for the well known (anonymous) memory mapped pages
+	 *
+	 * Note that page->_mapcount is overloaded in SLOB/SLUB/SLQB, so the
+	 * simple test in page_mapped() is not enough.
+	 */
+	if (!PageSlab(page) && page_mapped(page))
+		u |= 1 << KPF_MMAP;
+	if (PageAnon(page))
+		u |= 1 << KPF_ANON;
+
+	/*
+	 * compound pages: export both head/tail info
+	 * they together define a compound page's start/end pos and order
+	 */
+	if (PageHead(page))
+		u |= 1 << KPF_COMPOUND_HEAD;
+	if (PageTail(page))
+		u |= 1 << KPF_COMPOUND_TAIL;
+	if (PageHuge(page))
+		u |= 1 << KPF_HUGE;
+
+	u |= kpf_copy_bit(k, KPF_LOCKED,	PG_locked);
+
+	/*
+	 * Caveats on high order pages:
+	 * PG_buddy will only be set on the head page; SLUB/SLQB do the same
+	 * for PG_slab; SLOB won't set PG_slab at all on compound pages.
+	 */
+	u |= kpf_copy_bit(k, KPF_SLAB,		PG_slab);
+	u |= kpf_copy_bit(k, KPF_BUDDY,		PG_buddy);
+
+	u |= kpf_copy_bit(k, KPF_ERROR,		PG_error);
+	u |= kpf_copy_bit(k, KPF_DIRTY,		PG_dirty);
+	u |= kpf_copy_bit(k, KPF_UPTODATE,	PG_uptodate);
+	u |= kpf_copy_bit(k, KPF_WRITEBACK,	PG_writeback);
+
+	u |= kpf_copy_bit(k, KPF_LRU,		PG_lru);
+	u |= kpf_copy_bit(k, KPF_REFERENCED,	PG_referenced);
+	u |= kpf_copy_bit(k, KPF_ACTIVE,	PG_active);
+	u |= kpf_copy_bit(k, KPF_RECLAIM,	PG_reclaim);
+
+	u |= kpf_copy_bit(k, KPF_SWAPCACHE,	PG_swapcache);
+	u |= kpf_copy_bit(k, KPF_SWAPBACKED,	PG_swapbacked);
+
+	u |= kpf_copy_bit(k, KPF_UNEVICTABLE,	PG_unevictable);
+	u |= kpf_copy_bit(k, KPF_MLOCKED,	PG_mlocked);
+
+#ifdef CONFIG_IA64_UNCACHED_ALLOCATOR
+	u |= kpf_copy_bit(k, KPF_UNCACHED,	PG_uncached);
+#endif
+
+	u |= kpf_copy_bit(k, KPF_RESERVED,	PG_reserved);
+	u |= kpf_copy_bit(k, KPF_MAPPEDTODISK,	PG_mappedtodisk);
+	u |= kpf_copy_bit(k, KPF_PRIVATE,	PG_private);
+	u |= kpf_copy_bit(k, KPF_PRIVATE_2,	PG_private_2);
+	u |= kpf_copy_bit(k, KPF_OWNER_PRIVATE,	PG_owner_priv_1);
+	u |= kpf_copy_bit(k, KPF_ARCH,		PG_arch_1);
+
+	return u;
+};
 
 static ssize_t kpageflags_read(struct file *file, char __user *buf,
 			     size_t count, loff_t *ppos)
@@ -90,7 +197,6 @@ static ssize_t kpageflags_read(struct file *file, char __user *buf,
 	unsigned long src = *ppos;
 	unsigned long pfn;
 	ssize_t ret = 0;
-	u64 kflags, uflags;
 
 	pfn = src / KPMSIZE;
 	count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
@@ -98,32 +204,18 @@ static ssize_t kpageflags_read(struct file *file, char __user *buf,
 		return -EINVAL;
 
 	while (count > 0) {
-		ppage = NULL;
 		if (pfn_valid(pfn))
 			ppage = pfn_to_page(pfn);
-		pfn++;
-		if (!ppage)
-			kflags = 0;
 		else
-			kflags = ppage->flags;
-
-		uflags = kpf_copy_bit(kflags, KPF_LOCKED, PG_locked) |
-			kpf_copy_bit(kflags, KPF_ERROR, PG_error) |
-			kpf_copy_bit(kflags, KPF_REFERENCED, PG_referenced) |
-			kpf_copy_bit(kflags, KPF_UPTODATE, PG_uptodate) |
-			kpf_copy_bit(kflags, KPF_DIRTY, PG_dirty) |
-			kpf_copy_bit(kflags, KPF_LRU, PG_lru) |
-			kpf_copy_bit(kflags, KPF_ACTIVE, PG_active) |
-			kpf_copy_bit(kflags, KPF_SLAB, PG_slab) |
-			kpf_copy_bit(kflags, KPF_WRITEBACK, PG_writeback) |
-			kpf_copy_bit(kflags, KPF_RECLAIM, PG_reclaim) |
-			kpf_copy_bit(kflags, KPF_BUDDY, PG_buddy);
-
-		if (put_user(uflags, out++)) {
+			ppage = NULL;
+
+		if (put_user(get_uflags(ppage), out)) {
 			ret = -EFAULT;
 			break;
 		}
 
+		pfn++;
+		out++;
 		count -= KPMSIZE;
 	}
 
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index 3a6b193d844..0ff7566c767 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -202,9 +202,12 @@ static int ramfs_parse_options(char *data, struct ramfs_mount_opts *opts)
 				return -EINVAL;
 			opts->mode = option & S_IALLUGO;
 			break;
-		default:
-			printk(KERN_ERR "ramfs: bad mount option: %s\n", p);
-			return -EINVAL;
+		/*
+		 * We might like to report bad mount options here;
+		 * but traditionally ramfs has ignored all mount options,
+		 * and as it is used as a !CONFIG_SHMEM simple substitute
+		 * for tmpfs, better continue to ignore other mount options.
+		 */
 		}
 	}
 
diff --git a/fs/select.c b/fs/select.c
index 0fe0e1469df..d870237e42c 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -168,7 +168,7 @@ static struct poll_table_entry *poll_get_entry(struct poll_wqueues *p)
 	return table->entry++;
 }
 
-static int pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key)
+static int __pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key)
 {
 	struct poll_wqueues *pwq = wait->private;
 	DECLARE_WAITQUEUE(dummy_wait, pwq->polling_task);
@@ -194,6 +194,16 @@ static int pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key)
 	return default_wake_function(&dummy_wait, mode, sync, key);
 }
 
+static int pollwake(wait_queue_t *wait, unsigned mode, int sync, void *key)
+{
+	struct poll_table_entry *entry;
+
+	entry = container_of(wait, struct poll_table_entry, wait);
+	if (key && !((unsigned long)key & entry->key))
+		return 0;
+	return __pollwake(wait, mode, sync, key);
+}
+
 /* Add a new entry */
 static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,
 				poll_table *p)
@@ -205,6 +215,7 @@ static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,
 	get_file(filp);
 	entry->filp = filp;
 	entry->wait_address = wait_address;
+	entry->key = p->key;
 	init_waitqueue_func_entry(&entry->wait, pollwake);
 	entry->wait.private = pwq;
 	add_wait_queue(wait_address, &entry->wait);
@@ -362,6 +373,18 @@ get_max:
 #define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)
 #define POLLEX_SET (POLLPRI)
 
+static inline void wait_key_set(poll_table *wait, unsigned long in,
+				unsigned long out, unsigned long bit)
+{
+	if (wait) {
+		wait->key = POLLEX_SET;
+		if (in & bit)
+			wait->key |= POLLIN_SET;
+		if (out & bit)
+			wait->key |= POLLOUT_SET;
+	}
+}
+
 int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
 {
 	ktime_t expire, *to = NULL;
@@ -418,20 +441,25 @@ int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
 				if (file) {
 					f_op = file->f_op;
 					mask = DEFAULT_POLLMASK;
-					if (f_op && f_op->poll)
-						mask = (*f_op->poll)(file, retval ? NULL : wait);
+					if (f_op && f_op->poll) {
+						wait_key_set(wait, in, out, bit);
+						mask = (*f_op->poll)(file, wait);
+					}
 					fput_light(file, fput_needed);
 					if ((mask & POLLIN_SET) && (in & bit)) {
 						res_in |= bit;
 						retval++;
+						wait = NULL;
 					}
 					if ((mask & POLLOUT_SET) && (out & bit)) {
 						res_out |= bit;
 						retval++;
+						wait = NULL;
 					}
 					if ((mask & POLLEX_SET) && (ex & bit)) {
 						res_ex |= bit;
 						retval++;
+						wait = NULL;
 					}
 				}
 			}
@@ -685,8 +713,12 @@ static inline unsigned int do_pollfd(struct pollfd *pollfd, poll_table *pwait)
 		mask = POLLNVAL;
 		if (file != NULL) {
 			mask = DEFAULT_POLLMASK;
-			if (file->f_op && file->f_op->poll)
+			if (file->f_op && file->f_op->poll) {
+				if (pwait)
+					pwait->key = pollfd->events |
+							POLLERR | POLLHUP;
 				mask = file->f_op->poll(file, pwait);
+			}
 			/* Mask out unneeded events. */
 			mask &= pollfd->events | POLLERR | POLLHUP;
 			fput_light(file, fput_needed);
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index a3ba217fbe7..1d897ad808e 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -192,8 +192,11 @@ static void *sysfs_follow_link(struct dentry *dentry, struct nameidata *nd)
 {
 	int error = -ENOMEM;
 	unsigned long page = get_zeroed_page(GFP_KERNEL);
-	if (page)
+	if (page) {
 		error = sysfs_getlink(dentry, (char *) page); 
+		if (error < 0)
+			free_page((unsigned long)page);
+	}
 	nd_set_link(nd, error ? ERR_PTR(error) : (char *)page);
 	return NULL;
 }
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 3589eab02a2..3260b73abe2 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1937,6 +1937,9 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 	err  = bdi_init(&c->bdi);
 	if (err)
 		goto out_close;
+	err = bdi_register(&c->bdi, NULL, "ubifs");
+	if (err)
+		goto out_bdi;
 
 	err = ubifs_parse_options(c, data, 0);
 	if (err)
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 4db89e98535..82ec6a3c050 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,7 +47,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20090320
+#define ACPI_CA_VERSION                 0x20090521
 
 #include "actypes.h"
 #include "actbl.h"
@@ -201,6 +201,8 @@ acpi_evaluate_object_typed(acpi_handle object,
 acpi_status
 acpi_get_object_info(acpi_handle handle, struct acpi_buffer *return_buffer);
 
+acpi_status acpi_install_method(u8 *buffer);
+
 acpi_status
 acpi_get_next_object(acpi_object_type type,
 		     acpi_handle parent,
@@ -375,7 +377,7 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state);
 acpi_status acpi_leave_sleep_state(u8 sleep_state);
 
 /*
- * Debug output
+ * Error/Warning output
  */
 void ACPI_INTERNAL_VAR_XFACE
 acpi_error(const char *module_name,
@@ -394,6 +396,9 @@ void ACPI_INTERNAL_VAR_XFACE
 acpi_info(const char *module_name,
 	  u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
 
+/*
+ * Debug output
+ */
 #ifdef ACPI_DEBUG_OUTPUT
 
 void ACPI_INTERNAL_VAR_XFACE
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index f555d927f7c..37ba576d06e 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -429,20 +429,12 @@ typedef unsigned long long acpi_integer;
 
 /* Data manipulation */
 
-#define ACPI_LOWORD(l)                  ((u16)(u32)(l))
-#define ACPI_HIWORD(l)                  ((u16)((((u32)(l)) >> 16) & 0xFFFF))
-#define ACPI_LOBYTE(l)                  ((u8)(u16)(l))
-#define ACPI_HIBYTE(l)                  ((u8)((((u16)(l)) >> 8) & 0xFF))
-
-/* Full 64-bit integer must be available on both 32-bit and 64-bit platforms */
-
-struct acpi_integer_overlay {
-	u32 lo_dword;
-	u32 hi_dword;
-};
-
-#define ACPI_LODWORD(integer)           (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->lo_dword)
-#define ACPI_HIDWORD(integer)           (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->hi_dword)
+#define ACPI_LOBYTE(integer)            ((u8)   (u16)(integer))
+#define ACPI_HIBYTE(integer)            ((u8) (((u16)(integer)) >> 8))
+#define ACPI_LOWORD(integer)            ((u16)  (u32)(integer))
+#define ACPI_HIWORD(integer)            ((u16)(((u32)(integer)) >> 16))
+#define ACPI_LODWORD(integer64)         ((u32)  (u64)(integer64))
+#define ACPI_HIDWORD(integer64)         ((u32)(((u64)(integer64)) >> 32))
 
 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h
index 8e2cdc57b19..935c5d7fc86 100644
--- a/include/acpi/platform/acgcc.h
+++ b/include/acpi/platform/acgcc.h
@@ -62,4 +62,8 @@
  */
 #define ACPI_UNUSED_VAR __attribute__ ((unused))
 
+#ifdef _ANSI
+#define inline
+#endif
+
 #endif				/* __ACGCC_H__ */
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 6d49b2a498c..fcb8e4b159b 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -1,11 +1,11 @@
 /******************************************************************************
  *
- * Name: aclinux.h - OS specific defines, etc.
+ * Name: aclinux.h - OS specific defines, etc. for Linux
  *
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2008, Intel Corp.
+ * Copyright (C) 2000 - 2009, Intel Corp.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -44,10 +44,13 @@
 #ifndef __ACLINUX_H__
 #define __ACLINUX_H__
 
+/* Common (in-kernel/user-space) ACPICA configuration */
+
 #define ACPI_USE_SYSTEM_CLIBRARY
 #define ACPI_USE_DO_WHILE_0
 #define ACPI_MUTEX_TYPE             ACPI_BINARY_SEMAPHORE
 
+
 #ifdef __KERNEL__
 
 #include <linux/string.h>
@@ -63,15 +66,18 @@
 #include <linux/spinlock_types.h>
 #include <asm/current.h>
 
-/* Host-dependent types and defines */
+/* Host-dependent types and defines for in-kernel ACPICA */
 
 #define ACPI_MACHINE_WIDTH          BITS_PER_LONG
-#define acpi_cache_t                        struct kmem_cache
-#define acpi_spinlock                   spinlock_t *
 #define ACPI_EXPORT_SYMBOL(symbol)  EXPORT_SYMBOL(symbol);
 #define strtoul                     simple_strtoul
 
-#else				/* !__KERNEL__ */
+#define acpi_cache_t                        struct kmem_cache
+#define acpi_spinlock                       spinlock_t *
+#define acpi_cpu_flags                      unsigned long
+#define acpi_thread_id                      struct task_struct *
+
+#else /* !__KERNEL__ */
 
 #include <stdarg.h>
 #include <string.h>
@@ -79,6 +85,11 @@
 #include <ctype.h>
 #include <unistd.h>
 
+/* Host-dependent types and defines for user-space ACPICA */
+
+#define ACPI_FLUSH_CPU_CACHE()
+#define acpi_thread_id                      pthread_t
+
 #if defined(__ia64__) || defined(__x86_64__)
 #define ACPI_MACHINE_WIDTH          64
 #define COMPILER_DEPENDENT_INT64    long
@@ -94,17 +105,17 @@
 #define __cdecl
 #endif
 
-#define ACPI_FLUSH_CPU_CACHE()
-#endif				/* __KERNEL__ */
+#endif /* __KERNEL__ */
 
 /* Linux uses GCC */
 
 #include "acgcc.h"
 
-#define acpi_cpu_flags unsigned long
-
-#define acpi_thread_id struct task_struct *
 
+#ifdef __KERNEL__
+/*
+ * Overrides for in-kernel ACPICA
+ */
 static inline acpi_thread_id acpi_os_get_thread_id(void)
 {
 	return current;
@@ -119,30 +130,32 @@ static inline acpi_thread_id acpi_os_get_thread_id(void)
 #include <acpi/actypes.h>
 static inline void *acpi_os_allocate(acpi_size size)
 {
-	return kmalloc(size, irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
+	return kmalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
 }
+
 static inline void *acpi_os_allocate_zeroed(acpi_size size)
 {
-	return kzalloc(size, irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
+	return kzalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
 }
 
 static inline void *acpi_os_acquire_object(acpi_cache_t * cache)
 {
 	return kmem_cache_zalloc(cache,
-				 irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
+		irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
 }
 
-#define ACPI_ALLOCATE(a)	acpi_os_allocate(a)
-#define ACPI_ALLOCATE_ZEROED(a)	acpi_os_allocate_zeroed(a)
-#define ACPI_FREE(a)		kfree(a)
+#define ACPI_ALLOCATE(a)        acpi_os_allocate(a)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed(a)
+#define ACPI_FREE(a)            kfree(a)
 
-/*
- * We need to show where it is safe to preempt execution of ACPICA
- */
-#define ACPI_PREEMPTION_POINT()		\
-	do {				\
-		if (!irqs_disabled())	\
-			cond_resched();	\
+/* Used within ACPICA to show where it is safe to preempt execution */
+
+#define ACPI_PREEMPTION_POINT() \
+	do { \
+		if (!irqs_disabled()) \
+			cond_resched(); \
 	} while (0)
 
-#endif				/* __ACLINUX_H__ */
+#endif /* __KERNEL__ */
+
+#endif /* __ACLINUX_H__ */
diff --git a/include/asm-generic/atomic64.h b/include/asm-generic/atomic64.h
new file mode 100644
index 00000000000..b18ce4f9ee3
--- /dev/null
+++ b/include/asm-generic/atomic64.h
@@ -0,0 +1,42 @@
+/*
+ * Generic implementation of 64-bit atomics using spinlocks,
+ * useful on processors that don't have 64-bit atomic instructions.
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC_ATOMIC64_H
+#define _ASM_GENERIC_ATOMIC64_H
+
+typedef struct {
+	long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+extern long long atomic64_read(const atomic64_t *v);
+extern void	 atomic64_set(atomic64_t *v, long long i);
+extern void	 atomic64_add(long long a, atomic64_t *v);
+extern long long atomic64_add_return(long long a, atomic64_t *v);
+extern void	 atomic64_sub(long long a, atomic64_t *v);
+extern long long atomic64_sub_return(long long a, atomic64_t *v);
+extern long long atomic64_dec_if_positive(atomic64_t *v);
+extern long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n);
+extern long long atomic64_xchg(atomic64_t *v, long long new);
+extern int	 atomic64_add_unless(atomic64_t *v, long long a, long long u);
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v)			atomic64_add(1LL, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v) 	(atomic64_inc_return(v) == 0)
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec(v)			atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v) 	atomic64_add_unless((v), 1LL, 0LL)
+
+#endif  /*  _ASM_GENERIC_ATOMIC64_H  */
diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h
index e8852c092fe..28cc03bf19e 100644
--- a/include/asm-generic/errno.h
+++ b/include/asm-generic/errno.h
@@ -106,4 +106,6 @@
 #define	EOWNERDEAD	130	/* Owner died */
 #define	ENOTRECOVERABLE	131	/* State not recoverable */
 
+#define ERFKILL		132	/* Operation not possible due to RF-kill */
+
 #endif
diff --git a/include/asm-generic/kmap_types.h b/include/asm-generic/kmap_types.h
index 58c33055c30..54e8b3d956b 100644
--- a/include/asm-generic/kmap_types.h
+++ b/include/asm-generic/kmap_types.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_GENERIC_KMAP_TYPES_H
 #define _ASM_GENERIC_KMAP_TYPES_H
 
-#ifdef CONFIG_DEBUG_HIGHMEM
+#ifdef __WITH_KM_FENCE
 # define D(n) __KM_FENCE_##n ,
 #else
 # define D(n)
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index f1736ca7922..6bdba10fef4 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -1,4 +1,57 @@
-#include <linux/section-names.h>
+/*
+ * Helper macros to support writing architecture specific
+ * linker scripts.
+ *
+ * A minimal linker scripts has following content:
+ * [This is a sample, architectures may have special requiriements]
+ *
+ * OUTPUT_FORMAT(...)
+ * OUTPUT_ARCH(...)
+ * ENTRY(...)
+ * SECTIONS
+ * {
+ *	. = START;
+ *	__init_begin = .;
+ *	HEAD_TEXT_SECTION
+ *	INIT_TEXT_SECTION(PAGE_SIZE)
+ *	INIT_DATA_SECTION(...)
+ *	PERCPU(PAGE_SIZE)
+ *	__init_end = .;
+ *
+ *	_stext = .;
+ *	TEXT_SECTION = 0
+ *	_etext = .;
+ *
+ *      _sdata = .;
+ *	RO_DATA_SECTION(PAGE_SIZE)
+ *	RW_DATA_SECTION(...)
+ *	_edata = .;
+ *
+ *	EXCEPTION_TABLE(...)
+ *	NOTES
+ *
+ *	__bss_start = .;
+ *	BSS_SECTION(0, 0)
+ *	__bss_stop = .;
+ *	_end = .;
+ *
+ *	/DISCARD/ : {
+ *		EXIT_TEXT
+ *		EXIT_DATA
+ *		EXIT_CALL
+ *	}
+ *	STABS_DEBUG
+ *	DWARF_DEBUG
+ * }
+ *
+ * [__init_begin, __init_end] is the init section that may be freed after init
+ * [_stext, _etext] is the text section
+ * [_sdata, _edata] is the data section
+ *
+ * Some of the included output section have their own set of constants.
+ * Examples are: [__initramfs_start, __initramfs_end] for initramfs and
+ *               [__nosave_begin, __nosave_end] for the nosave data
+ */
 
 #ifndef LOAD_OFFSET
 #define LOAD_OFFSET 0
@@ -116,7 +169,36 @@
 	FTRACE_EVENTS()							\
 	TRACE_SYSCALLS()
 
-#define RO_DATA(align)							\
+/*
+ * Data section helpers
+ */
+#define NOSAVE_DATA							\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__nosave_begin) = .;				\
+	*(.data.nosave)							\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__nosave_end) = .;
+
+#define PAGE_ALIGNED_DATA(page_align)					\
+	. = ALIGN(page_align);						\
+	*(.data.page_aligned)
+
+#define READ_MOSTLY_DATA(align)						\
+	. = ALIGN(align);						\
+	*(.data.read_mostly)
+
+#define CACHELINE_ALIGNED_DATA(align)					\
+	. = ALIGN(align);						\
+	*(.data.cacheline_aligned)
+
+#define INIT_TASK(align)						\
+	. = ALIGN(align);						\
+	*(.data.init_task)
+
+/*
+ * Read only Data
+ */
+#define RO_DATA_SECTION(align)						\
 	. = ALIGN((align));						\
 	.rodata           : AT(ADDR(.rodata) - LOAD_OFFSET) {		\
 		VMLINUX_SYMBOL(__start_rodata) = .;			\
@@ -270,9 +352,10 @@
 	}								\
 	. = ALIGN((align));
 
-/* RODATA provided for backward compatibility.
+/* RODATA & RO_DATA provided for backward compatibility.
  * All archs are supposed to use RO_DATA() */
-#define RODATA RO_DATA(4096)
+#define RODATA          RO_DATA_SECTION(4096)
+#define RO_DATA(align)  RO_DATA_SECTION(align)
 
 #define SECURITY_INIT							\
 	.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
@@ -330,16 +413,42 @@
 #endif
 
 /* Section used for early init (in .S files) */
-#define HEAD_TEXT  *(HEAD_TEXT_SECTION)
+#define HEAD_TEXT  *(.head.text)
+
+#define HEAD_TEXT_SECTION							\
+	.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {		\
+		HEAD_TEXT						\
+	}
+
+/*
+ * Exception table
+ */
+#define EXCEPTION_TABLE(align)						\
+	. = ALIGN(align);						\
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start___ex_table) = .;			\
+		*(__ex_table)						\
+		VMLINUX_SYMBOL(__stop___ex_table) = .;			\
+	}
+
+/*
+ * Init task
+ */
+#define INIT_TASK_DATA(align)						\
+	. = ALIGN(align);						\
+	.data.init_task : {						\
+		INIT_TASK						\
+	}
 
 /* init and exit section handling */
 #define INIT_DATA							\
 	*(.init.data)							\
 	DEV_DISCARD(init.data)						\
-	DEV_DISCARD(init.rodata)					\
 	CPU_DISCARD(init.data)						\
-	CPU_DISCARD(init.rodata)					\
 	MEM_DISCARD(init.data)						\
+	*(.init.rodata)							\
+	DEV_DISCARD(init.rodata)					\
+	CPU_DISCARD(init.rodata)					\
 	MEM_DISCARD(init.rodata)
 
 #define INIT_TEXT							\
@@ -363,9 +472,35 @@
 	CPU_DISCARD(exit.text)						\
 	MEM_DISCARD(exit.text)
 
-		/* DWARF debug sections.
-		Symbols in the DWARF debugging sections are relative to
-		the beginning of the section so we begin them at 0.  */
+#define EXIT_CALL							\
+	*(.exitcall.exit)
+
+/*
+ * bss (Block Started by Symbol) - uninitialized data
+ * zeroed during startup
+ */
+#define SBSS								\
+	.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {				\
+		*(.sbss)						\
+		*(.scommon)						\
+	}
+
+#define BSS(bss_align)							\
+	. = ALIGN(bss_align);						\
+	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {				\
+		VMLINUX_SYMBOL(__bss_start) = .;			\
+		*(.bss.page_aligned)					\
+		*(.dynbss)						\
+		*(.bss)							\
+		*(COMMON)						\
+		VMLINUX_SYMBOL(__bss_stop) = .;				\
+	}
+
+/*
+ * DWARF debug sections.
+ * Symbols in the DWARF debugging sections are relative to
+ * the beginning of the section so we begin them at 0.
+ */
 #define DWARF_DEBUG							\
 		/* DWARF 1 */						\
 		.debug          0 : { *(.debug) }			\
@@ -432,6 +567,12 @@
 		VMLINUX_SYMBOL(__stop_notes) = .;			\
 	}
 
+#define INIT_SETUP(initsetup_align)					\
+		. = ALIGN(initsetup_align);				\
+		VMLINUX_SYMBOL(__setup_start) = .;			\
+		*(.init.setup)						\
+		VMLINUX_SYMBOL(__setup_end) = .;
+
 #define INITCALLS							\
 	*(.initcallearly.init)						\
 	VMLINUX_SYMBOL(__early_initcall_end) = .;			\
@@ -453,6 +594,31 @@
   	*(.initcall7.init)						\
   	*(.initcall7s.init)
 
+#define INIT_CALLS							\
+		VMLINUX_SYMBOL(__initcall_start) = .;			\
+		INITCALLS						\
+		VMLINUX_SYMBOL(__initcall_end) = .;
+
+#define CON_INITCALL							\
+		VMLINUX_SYMBOL(__con_initcall_start) = .;		\
+		*(.con_initcall.init)					\
+		VMLINUX_SYMBOL(__con_initcall_end) = .;
+
+#define SECURITY_INITCALL						\
+		VMLINUX_SYMBOL(__security_initcall_start) = .;		\
+		*(.security_initcall.init)				\
+		VMLINUX_SYMBOL(__security_initcall_end) = .;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#define INIT_RAM_FS							\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__initramfs_start) = .;				\
+	*(.init.ramfs)							\
+	VMLINUX_SYMBOL(__initramfs_end) = .;
+#else
+#define INITRAMFS
+#endif
+
 /**
  * PERCPU_VADDR - define output section for percpu area
  * @vaddr: explicit base address (optional)
@@ -509,3 +675,58 @@
 		*(.data.percpu.shared_aligned)				\
 		VMLINUX_SYMBOL(__per_cpu_end) = .;			\
 	}
+
+
+/*
+ * Definition of the high level *_SECTION macros
+ * They will fit only a subset of the architectures
+ */
+
+
+/*
+ * Writeable data.
+ * All sections are combined in a single .data section.
+ * The sections following CONSTRUCTORS are arranged so their
+ * typical alignment matches.
+ * A cacheline is typical/always less than a PAGE_SIZE so
+ * the sections that has this restriction (or similar)
+ * is located before the ones requiring PAGE_SIZE alignment.
+ * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
+ * matches the requirment of PAGE_ALIGNED_DATA.
+ *
+ * use 0 as page_align if page_aligned data is not used */
+#define RW_DATA_SECTION(cacheline, nosave, pagealigned, inittask)	\
+	. = ALIGN(PAGE_SIZE);						\
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {				\
+		INIT_TASK(inittask)					\
+		CACHELINE_ALIGNED_DATA(cacheline)			\
+		READ_MOSTLY_DATA(cacheline)				\
+		DATA_DATA						\
+		CONSTRUCTORS						\
+		NOSAVE_DATA(nosave)					\
+		PAGE_ALIGNED_DATA(pagealigned)				\
+	}
+
+#define INIT_TEXT_SECTION(inittext_align)				\
+	. = ALIGN(inittext_align);					\
+	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(_sinittext) = .;				\
+		INIT_TEXT						\
+		VMLINUX_SYMBOL(_einittext) = .;				\
+	}
+
+#define INIT_DATA_SECTION(initsetup_align)				\
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {		\
+		INIT_DATA						\
+		INIT_SETUP(initsetup_align)				\
+		INIT_CALLS						\
+		CON_INITCALL						\
+		SECURITY_INITCALL					\
+		INIT_RAM_FS						\
+	}
+
+#define BSS_SECTION(sbss_align, bss_align)				\
+	SBSS								\
+	BSS(bss_align)							\
+	. = ALIGN(4);
+
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index f8634ab53b8..45c18672b09 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -254,8 +254,8 @@
 	{0x1002, 0x940A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x940B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x940F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
-	{0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
-	{0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x94B1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x94B3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x94B5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
@@ -273,8 +273,8 @@
 	{0x1002, 0x9456, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x945A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x945B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
-	{0x1002, 0x9460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
-	{0x1002, 0x9462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x946A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x946B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x947A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index fe3e3a4b4ae..41862e9a4c2 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -496,6 +496,16 @@ typedef struct {
 #define DRM_RADEON_SETPARAM   0x19
 #define DRM_RADEON_SURF_ALLOC 0x1a
 #define DRM_RADEON_SURF_FREE  0x1b
+/* KMS ioctl */
+#define DRM_RADEON_GEM_INFO		0x1c
+#define DRM_RADEON_GEM_CREATE		0x1d
+#define DRM_RADEON_GEM_MMAP		0x1e
+#define DRM_RADEON_GEM_PREAD		0x21
+#define DRM_RADEON_GEM_PWRITE		0x22
+#define DRM_RADEON_GEM_SET_DOMAIN	0x23
+#define DRM_RADEON_GEM_WAIT_IDLE	0x24
+#define DRM_RADEON_CS			0x26
+#define DRM_RADEON_INFO			0x27
 
 #define DRM_IOCTL_RADEON_CP_INIT    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
 #define DRM_IOCTL_RADEON_CP_START   DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_START)
@@ -524,6 +534,17 @@ typedef struct {
 #define DRM_IOCTL_RADEON_SETPARAM   DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SETPARAM, drm_radeon_setparam_t)
 #define DRM_IOCTL_RADEON_SURF_ALLOC DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SURF_ALLOC, drm_radeon_surface_alloc_t)
 #define DRM_IOCTL_RADEON_SURF_FREE  DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SURF_FREE, drm_radeon_surface_free_t)
+/* KMS */
+#define DRM_IOCTL_RADEON_GEM_INFO	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_INFO, struct drm_radeon_gem_info)
+#define DRM_IOCTL_RADEON_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_CREATE, struct drm_radeon_gem_create)
+#define DRM_IOCTL_RADEON_GEM_MMAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_MMAP, struct drm_radeon_gem_mmap)
+#define DRM_IOCTL_RADEON_GEM_PREAD	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_PREAD, struct drm_radeon_gem_pread)
+#define DRM_IOCTL_RADEON_GEM_PWRITE	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_PWRITE, struct drm_radeon_gem_pwrite)
+#define DRM_IOCTL_RADEON_GEM_SET_DOMAIN	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_DOMAIN, struct drm_radeon_gem_set_domain)
+#define DRM_IOCTL_RADEON_GEM_WAIT_IDLE	DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle)
+#define DRM_IOCTL_RADEON_CS		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs)
+#define DRM_IOCTL_RADEON_INFO		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
+
 
 typedef struct drm_radeon_init {
 	enum {
@@ -682,6 +703,7 @@ typedef struct drm_radeon_indirect {
 #define RADEON_PARAM_VBLANK_CRTC           13   /* VBLANK CRTC */
 #define RADEON_PARAM_FB_LOCATION           14   /* FB location */
 #define RADEON_PARAM_NUM_GB_PIPES          15   /* num GB pipes */
+#define RADEON_PARAM_DEVICE_ID             16
 
 typedef struct drm_radeon_getparam {
 	int param;
@@ -751,4 +773,112 @@ typedef struct drm_radeon_surface_free {
 #define	DRM_RADEON_VBLANK_CRTC1		1
 #define	DRM_RADEON_VBLANK_CRTC2		2
 
+/*
+ * Kernel modesetting world below.
+ */
+#define RADEON_GEM_DOMAIN_CPU		0x1
+#define RADEON_GEM_DOMAIN_GTT		0x2
+#define RADEON_GEM_DOMAIN_VRAM		0x4
+
+struct drm_radeon_gem_info {
+	uint64_t	gart_size;
+	uint64_t	vram_size;
+	uint64_t	vram_visible;
+};
+
+#define RADEON_GEM_NO_BACKING_STORE 1
+
+struct drm_radeon_gem_create {
+	uint64_t	size;
+	uint64_t	alignment;
+	uint32_t	handle;
+	uint32_t	initial_domain;
+	uint32_t	flags;
+};
+
+struct drm_radeon_gem_mmap {
+	uint32_t	handle;
+	uint32_t	pad;
+	uint64_t	offset;
+	uint64_t	size;
+	uint64_t	addr_ptr;
+};
+
+struct drm_radeon_gem_set_domain {
+	uint32_t	handle;
+	uint32_t	read_domains;
+	uint32_t	write_domain;
+};
+
+struct drm_radeon_gem_wait_idle {
+	uint32_t	handle;
+	uint32_t	pad;
+};
+
+struct drm_radeon_gem_busy {
+	uint32_t	handle;
+	uint32_t	busy;
+};
+
+struct drm_radeon_gem_pread {
+	/** Handle for the object being read. */
+	uint32_t handle;
+	uint32_t pad;
+	/** Offset into the object to read from */
+	uint64_t offset;
+	/** Length of data to read */
+	uint64_t size;
+	/** Pointer to write the data into. */
+	/* void *, but pointers are not 32/64 compatible */
+	uint64_t data_ptr;
+};
+
+struct drm_radeon_gem_pwrite {
+	/** Handle for the object being written to. */
+	uint32_t handle;
+	uint32_t pad;
+	/** Offset into the object to write to */
+	uint64_t offset;
+	/** Length of data to write */
+	uint64_t size;
+	/** Pointer to read the data from. */
+	/* void *, but pointers are not 32/64 compatible */
+	uint64_t data_ptr;
+};
+
+#define RADEON_CHUNK_ID_RELOCS	0x01
+#define RADEON_CHUNK_ID_IB	0x02
+
+struct drm_radeon_cs_chunk {
+	uint32_t		chunk_id;
+	uint32_t		length_dw;
+	uint64_t		chunk_data;
+};
+
+struct drm_radeon_cs_reloc {
+	uint32_t		handle;
+	uint32_t		read_domains;
+	uint32_t		write_domain;
+	uint32_t		flags;
+};
+
+struct drm_radeon_cs {
+	uint32_t		num_chunks;
+	uint32_t		cs_id;
+	/* this points to uint64_t * which point to cs chunks */
+	uint64_t		chunks;
+	/* updates to the limits after this CS ioctl */
+	uint64_t		gart_limit;
+	uint64_t		vram_limit;
+};
+
+#define RADEON_INFO_DEVICE_ID		0x00
+#define RADEON_INFO_NUM_GB_PIPES	0x01
+
+struct drm_radeon_info {
+	uint32_t		request;
+	uint32_t		pad;
+	uint64_t		value;
+};
+
 #endif
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
new file mode 100644
index 00000000000..cd22ab4b495
--- /dev/null
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -0,0 +1,618 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _TTM_BO_API_H_
+#define _TTM_BO_API_H_
+
+#include "drm_hashtab.h"
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/mm.h>
+#include <linux/rbtree.h>
+#include <linux/bitmap.h>
+
+struct ttm_bo_device;
+
+struct drm_mm_node;
+
+/**
+ * struct ttm_mem_reg
+ *
+ * @mm_node: Memory manager node.
+ * @size: Requested size of memory region.
+ * @num_pages: Actual size of memory region in pages.
+ * @page_alignment: Page alignment.
+ * @placement: Placement flags.
+ *
+ * Structure indicating the placement and space resources used by a
+ * buffer object.
+ */
+
+struct ttm_mem_reg {
+	struct drm_mm_node *mm_node;
+	unsigned long size;
+	unsigned long num_pages;
+	uint32_t page_alignment;
+	uint32_t mem_type;
+	uint32_t placement;
+};
+
+/**
+ * enum ttm_bo_type
+ *
+ * @ttm_bo_type_device:	These are 'normal' buffers that can
+ * be mmapped by user space. Each of these bos occupy a slot in the
+ * device address space, that can be used for normal vm operations.
+ *
+ * @ttm_bo_type_user: These are user-space memory areas that are made
+ * available to the GPU by mapping the buffer pages into the GPU aperture
+ * space. These buffers cannot be mmaped from the device address space.
+ *
+ * @ttm_bo_type_kernel: These buffers are like ttm_bo_type_device buffers,
+ * but they cannot be accessed from user-space. For kernel-only use.
+ */
+
+enum ttm_bo_type {
+	ttm_bo_type_device,
+	ttm_bo_type_user,
+	ttm_bo_type_kernel
+};
+
+struct ttm_tt;
+
+/**
+ * struct ttm_buffer_object
+ *
+ * @bdev: Pointer to the buffer object device structure.
+ * @buffer_start: The virtual user-space start address of ttm_bo_type_user
+ * buffers.
+ * @type: The bo type.
+ * @destroy: Destruction function. If NULL, kfree is used.
+ * @num_pages: Actual number of pages.
+ * @addr_space_offset: Address space offset.
+ * @acc_size: Accounted size for this object.
+ * @kref: Reference count of this buffer object. When this refcount reaches
+ * zero, the object is put on the delayed delete list.
+ * @list_kref: List reference count of this buffer object. This member is
+ * used to avoid destruction while the buffer object is still on a list.
+ * Lru lists may keep one refcount, the delayed delete list, and kref != 0
+ * keeps one refcount. When this refcount reaches zero,
+ * the object is destroyed.
+ * @event_queue: Queue for processes waiting on buffer object status change.
+ * @lock: spinlock protecting mostly synchronization members.
+ * @proposed_placement: Proposed placement for the buffer. Changed only by the
+ * creator prior to validation as opposed to bo->mem.proposed_flags which is
+ * changed by the implementation prior to a buffer move if it wants to outsmart
+ * the buffer creator / user. This latter happens, for example, at eviction.
+ * @mem: structure describing current placement.
+ * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * pinned in physical memory. If this behaviour is not desired, this member
+ * holds a pointer to a persistant shmem object.
+ * @ttm: TTM structure holding system pages.
+ * @evicted: Whether the object was evicted without user-space knowing.
+ * @cpu_writes: For synchronization. Number of cpu writers.
+ * @lru: List head for the lru list.
+ * @ddestroy: List head for the delayed destroy list.
+ * @swap: List head for swap LRU list.
+ * @val_seq: Sequence of the validation holding the @reserved lock.
+ * Used to avoid starvation when many processes compete to validate the
+ * buffer. This member is protected by the bo_device::lru_lock.
+ * @seq_valid: The value of @val_seq is valid. This value is protected by
+ * the bo_device::lru_lock.
+ * @reserved: Deadlock-free lock used for synchronization state transitions.
+ * @sync_obj_arg: Opaque argument to synchronization object function.
+ * @sync_obj: Pointer to a synchronization object.
+ * @priv_flags: Flags describing buffer object internal state.
+ * @vm_rb: Rb node for the vm rb tree.
+ * @vm_node: Address space manager node.
+ * @offset: The current GPU offset, which can have different meanings
+ * depending on the memory type. For SYSTEM type memory, it should be 0.
+ * @cur_placement: Hint of current placement.
+ *
+ * Base class for TTM buffer object, that deals with data placement and CPU
+ * mappings. GPU mappings are really up to the driver, but for simpler GPUs
+ * the driver can usually use the placement offset @offset directly as the
+ * GPU virtual address. For drivers implementing multiple
+ * GPU memory manager contexts, the driver should manage the address space
+ * in these contexts separately and use these objects to get the correct
+ * placement and caching for these GPU maps. This makes it possible to use
+ * these objects for even quite elaborate memory management schemes.
+ * The destroy member, the API visibility of this object makes it possible
+ * to derive driver specific types.
+ */
+
+struct ttm_buffer_object {
+	/**
+	 * Members constant at init.
+	 */
+
+	struct ttm_bo_device *bdev;
+	unsigned long buffer_start;
+	enum ttm_bo_type type;
+	void (*destroy) (struct ttm_buffer_object *);
+	unsigned long num_pages;
+	uint64_t addr_space_offset;
+	size_t acc_size;
+
+	/**
+	* Members not needing protection.
+	*/
+
+	struct kref kref;
+	struct kref list_kref;
+	wait_queue_head_t event_queue;
+	spinlock_t lock;
+
+	/**
+	 * Members protected by the bo::reserved lock.
+	 */
+
+	uint32_t proposed_placement;
+	struct ttm_mem_reg mem;
+	struct file *persistant_swap_storage;
+	struct ttm_tt *ttm;
+	bool evicted;
+
+	/**
+	 * Members protected by the bo::reserved lock only when written to.
+	 */
+
+	atomic_t cpu_writers;
+
+	/**
+	 * Members protected by the bdev::lru_lock.
+	 */
+
+	struct list_head lru;
+	struct list_head ddestroy;
+	struct list_head swap;
+	uint32_t val_seq;
+	bool seq_valid;
+
+	/**
+	 * Members protected by the bdev::lru_lock
+	 * only when written to.
+	 */
+
+	atomic_t reserved;
+
+
+	/**
+	 * Members protected by the bo::lock
+	 */
+
+	void *sync_obj_arg;
+	void *sync_obj;
+	unsigned long priv_flags;
+
+	/**
+	 * Members protected by the bdev::vm_lock
+	 */
+
+	struct rb_node vm_rb;
+	struct drm_mm_node *vm_node;
+
+
+	/**
+	 * Special members that are protected by the reserve lock
+	 * and the bo::lock when written to. Can be read with
+	 * either of these locks held.
+	 */
+
+	unsigned long offset;
+	uint32_t cur_placement;
+};
+
+/**
+ * struct ttm_bo_kmap_obj
+ *
+ * @virtual: The current kernel virtual address.
+ * @page: The page when kmap'ing a single page.
+ * @bo_kmap_type: Type of bo_kmap.
+ *
+ * Object describing a kernel mapping. Since a TTM bo may be located
+ * in various memory types with various caching policies, the
+ * mapping can either be an ioremap, a vmap, a kmap or part of a
+ * premapped region.
+ */
+
+struct ttm_bo_kmap_obj {
+	void *virtual;
+	struct page *page;
+	enum {
+		ttm_bo_map_iomap,
+		ttm_bo_map_vmap,
+		ttm_bo_map_kmap,
+		ttm_bo_map_premapped,
+	} bo_kmap_type;
+};
+
+/**
+ * ttm_bo_reference - reference a struct ttm_buffer_object
+ *
+ * @bo: The buffer object.
+ *
+ * Returns a refcounted pointer to a buffer object.
+ */
+
+static inline struct ttm_buffer_object *
+ttm_bo_reference(struct ttm_buffer_object *bo)
+{
+	kref_get(&bo->kref);
+	return bo;
+}
+
+/**
+ * ttm_bo_wait - wait for buffer idle.
+ *
+ * @bo:  The buffer object.
+ * @interruptible:  Use interruptible wait.
+ * @no_wait:  Return immediately if buffer is busy.
+ *
+ * This function must be called with the bo::mutex held, and makes
+ * sure any previous rendering to the buffer is completed.
+ * Note: It might be necessary to block validations before the
+ * wait by reserving the buffer.
+ * Returns -EBUSY if no_wait is true and the buffer is busy.
+ * Returns -ERESTART if interrupted by a signal.
+ */
+extern int ttm_bo_wait(struct ttm_buffer_object *bo, bool lazy,
+		       bool interruptible, bool no_wait);
+/**
+ * ttm_buffer_object_validate
+ *
+ * @bo: The buffer object.
+ * @proposed_placement: Proposed_placement for the buffer object.
+ * @interruptible: Sleep interruptible if sleeping.
+ * @no_wait: Return immediately if the buffer is busy.
+ *
+ * Changes placement and caching policy of the buffer object
+ * according to bo::proposed_flags.
+ * Returns
+ * -EINVAL on invalid proposed_flags.
+ * -ENOMEM on out-of-memory condition.
+ * -EBUSY if no_wait is true and buffer busy.
+ * -ERESTART if interrupted by a signal.
+ */
+extern int ttm_buffer_object_validate(struct ttm_buffer_object *bo,
+				      uint32_t proposed_placement,
+				      bool interruptible, bool no_wait);
+/**
+ * ttm_bo_unref
+ *
+ * @bo: The buffer object.
+ *
+ * Unreference and clear a pointer to a buffer object.
+ */
+extern void ttm_bo_unref(struct ttm_buffer_object **bo);
+
+/**
+ * ttm_bo_synccpu_write_grab
+ *
+ * @bo: The buffer object:
+ * @no_wait: Return immediately if buffer is busy.
+ *
+ * Synchronizes a buffer object for CPU RW access. This means
+ * blocking command submission that affects the buffer and
+ * waiting for buffer idle. This lock is recursive.
+ * Returns
+ * -EBUSY if the buffer is busy and no_wait is true.
+ * -ERESTART if interrupted by a signal.
+ */
+
+extern int
+ttm_bo_synccpu_write_grab(struct ttm_buffer_object *bo, bool no_wait);
+/**
+ * ttm_bo_synccpu_write_release:
+ *
+ * @bo : The buffer object.
+ *
+ * Releases a synccpu lock.
+ */
+extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_buffer_object_init
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @bo: Pointer to a ttm_buffer_object to be initialized.
+ * @size: Requested size of buffer object.
+ * @type: Requested type of buffer object.
+ * @flags: Initial placement flags.
+ * @page_alignment: Data alignment in pages.
+ * @buffer_start: Virtual address of user space data backing a
+ * user buffer object.
+ * @interruptible: If needing to sleep to wait for GPU resources,
+ * sleep interruptible.
+ * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * pinned in physical memory. If this behaviour is not desired, this member
+ * holds a pointer to a persistant shmem object. Typically, this would
+ * point to the shmem object backing a GEM object if TTM is used to back a
+ * GEM user interface.
+ * @acc_size: Accounted size for this object.
+ * @destroy: Destroy function. Use NULL for kfree().
+ *
+ * This function initializes a pre-allocated struct ttm_buffer_object.
+ * As this object may be part of a larger structure, this function,
+ * together with the @destroy function,
+ * enables driver-specific objects derived from a ttm_buffer_object.
+ * On successful return, the object kref and list_kref are set to 1.
+ * Returns
+ * -ENOMEM: Out of memory.
+ * -EINVAL: Invalid placement flags.
+ * -ERESTART: Interrupted by signal while sleeping waiting for resources.
+ */
+
+extern int ttm_buffer_object_init(struct ttm_bo_device *bdev,
+				  struct ttm_buffer_object *bo,
+				  unsigned long size,
+				  enum ttm_bo_type type,
+				  uint32_t flags,
+				  uint32_t page_alignment,
+				  unsigned long buffer_start,
+				  bool interrubtible,
+				  struct file *persistant_swap_storage,
+				  size_t acc_size,
+				  void (*destroy) (struct ttm_buffer_object *));
+/**
+ * ttm_bo_synccpu_object_init
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @bo: Pointer to a ttm_buffer_object to be initialized.
+ * @size: Requested size of buffer object.
+ * @type: Requested type of buffer object.
+ * @flags: Initial placement flags.
+ * @page_alignment: Data alignment in pages.
+ * @buffer_start: Virtual address of user space data backing a
+ * user buffer object.
+ * @interruptible: If needing to sleep while waiting for GPU resources,
+ * sleep interruptible.
+ * @persistant_swap_storage: Usually the swap storage is deleted for buffers
+ * pinned in physical memory. If this behaviour is not desired, this member
+ * holds a pointer to a persistant shmem object. Typically, this would
+ * point to the shmem object backing a GEM object if TTM is used to back a
+ * GEM user interface.
+ * @p_bo: On successful completion *p_bo points to the created object.
+ *
+ * This function allocates a ttm_buffer_object, and then calls
+ * ttm_buffer_object_init on that object.
+ * The destroy function is set to kfree().
+ * Returns
+ * -ENOMEM: Out of memory.
+ * -EINVAL: Invalid placement flags.
+ * -ERESTART: Interrupted by signal while waiting for resources.
+ */
+
+extern int ttm_buffer_object_create(struct ttm_bo_device *bdev,
+				    unsigned long size,
+				    enum ttm_bo_type type,
+				    uint32_t flags,
+				    uint32_t page_alignment,
+				    unsigned long buffer_start,
+				    bool interruptible,
+				    struct file *persistant_swap_storage,
+				    struct ttm_buffer_object **p_bo);
+
+/**
+ * ttm_bo_check_placement
+ *
+ * @bo: the buffer object.
+ * @set_flags: placement flags to set.
+ * @clr_flags: placement flags to clear.
+ *
+ * Performs minimal validity checking on an intended change of
+ * placement flags.
+ * Returns
+ * -EINVAL: Intended change is invalid or not allowed.
+ */
+
+extern int ttm_bo_check_placement(struct ttm_buffer_object *bo,
+				  uint32_t set_flags, uint32_t clr_flags);
+
+/**
+ * ttm_bo_init_mm
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @mem_type: The memory type.
+ * @p_offset: offset for managed area in pages.
+ * @p_size: size managed area in pages.
+ *
+ * Initialize a manager for a given memory type.
+ * Note: if part of driver firstopen, it must be protected from a
+ * potentially racing lastclose.
+ * Returns:
+ * -EINVAL: invalid size or memory type.
+ * -ENOMEM: Not enough memory.
+ * May also return driver-specified errors.
+ */
+
+extern int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type,
+			  unsigned long p_offset, unsigned long p_size);
+/**
+ * ttm_bo_clean_mm
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @mem_type: The memory type.
+ *
+ * Take down a manager for a given memory type after first walking
+ * the LRU list to evict any buffers left alive.
+ *
+ * Normally, this function is part of lastclose() or unload(), and at that
+ * point there shouldn't be any buffers left created by user-space, since
+ * there should've been removed by the file descriptor release() method.
+ * However, before this function is run, make sure to signal all sync objects,
+ * and verify that the delayed delete queue is empty. The driver must also
+ * make sure that there are no NO_EVICT buffers present in this memory type
+ * when the call is made.
+ *
+ * If this function is part of a VT switch, the caller must make sure that
+ * there are no appications currently validating buffers before this
+ * function is called. The caller can do that by first taking the
+ * struct ttm_bo_device::ttm_lock in write mode.
+ *
+ * Returns:
+ * -EINVAL: invalid or uninitialized memory type.
+ * -EBUSY: There are still buffers left in this memory type.
+ */
+
+extern int ttm_bo_clean_mm(struct ttm_bo_device *bdev, unsigned mem_type);
+
+/**
+ * ttm_bo_evict_mm
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @mem_type: The memory type.
+ *
+ * Evicts all buffers on the lru list of the memory type.
+ * This is normally part of a VT switch or an
+ * out-of-memory-space-due-to-fragmentation handler.
+ * The caller must make sure that there are no other processes
+ * currently validating buffers, and can do that by taking the
+ * struct ttm_bo_device::ttm_lock in write mode.
+ *
+ * Returns:
+ * -EINVAL: Invalid or uninitialized memory type.
+ * -ERESTART: The call was interrupted by a signal while waiting to
+ * evict a buffer.
+ */
+
+extern int ttm_bo_evict_mm(struct ttm_bo_device *bdev, unsigned mem_type);
+
+/**
+ * ttm_kmap_obj_virtual
+ *
+ * @map: A struct ttm_bo_kmap_obj returned from ttm_bo_kmap.
+ * @is_iomem: Pointer to an integer that on return indicates 1 if the
+ * virtual map is io memory, 0 if normal memory.
+ *
+ * Returns the virtual address of a buffer object area mapped by ttm_bo_kmap.
+ * If *is_iomem is 1 on return, the virtual address points to an io memory area,
+ * that should strictly be accessed by the iowriteXX() and similar functions.
+ */
+
+static inline void *ttm_kmap_obj_virtual(struct ttm_bo_kmap_obj *map,
+					 bool *is_iomem)
+{
+	*is_iomem = (map->bo_kmap_type == ttm_bo_map_iomap ||
+		     map->bo_kmap_type == ttm_bo_map_premapped);
+	return map->virtual;
+}
+
+/**
+ * ttm_bo_kmap
+ *
+ * @bo: The buffer object.
+ * @start_page: The first page to map.
+ * @num_pages: Number of pages to map.
+ * @map: pointer to a struct ttm_bo_kmap_obj representing the map.
+ *
+ * Sets up a kernel virtual mapping, using ioremap, vmap or kmap to the
+ * data in the buffer object. The ttm_kmap_obj_virtual function can then be
+ * used to obtain a virtual address to the data.
+ *
+ * Returns
+ * -ENOMEM: Out of memory.
+ * -EINVAL: Invalid range.
+ */
+
+extern int ttm_bo_kmap(struct ttm_buffer_object *bo, unsigned long start_page,
+		       unsigned long num_pages, struct ttm_bo_kmap_obj *map);
+
+/**
+ * ttm_bo_kunmap
+ *
+ * @map: Object describing the map to unmap.
+ *
+ * Unmaps a kernel map set up by ttm_bo_kmap.
+ */
+
+extern void ttm_bo_kunmap(struct ttm_bo_kmap_obj *map);
+
+#if 0
+#endif
+
+/**
+ * ttm_fbdev_mmap - mmap fbdev memory backed by a ttm buffer object.
+ *
+ * @vma:       vma as input from the fbdev mmap method.
+ * @bo:        The bo backing the address space. The address space will
+ * have the same size as the bo, and start at offset 0.
+ *
+ * This function is intended to be called by the fbdev mmap method
+ * if the fbdev address space is to be backed by a bo.
+ */
+
+extern int ttm_fbdev_mmap(struct vm_area_struct *vma,
+			  struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_mmap - mmap out of the ttm device address space.
+ *
+ * @filp:      filp as input from the mmap method.
+ * @vma:       vma as input from the mmap method.
+ * @bdev:      Pointer to the ttm_bo_device with the address space manager.
+ *
+ * This function is intended to be called by the device mmap method.
+ * if the device address space is to be backed by the bo manager.
+ */
+
+extern int ttm_bo_mmap(struct file *filp, struct vm_area_struct *vma,
+		       struct ttm_bo_device *bdev);
+
+/**
+ * ttm_bo_io
+ *
+ * @bdev:      Pointer to the struct ttm_bo_device.
+ * @filp:      Pointer to the struct file attempting to read / write.
+ * @wbuf:      User-space pointer to address of buffer to write. NULL on read.
+ * @rbuf:      User-space pointer to address of buffer to read into.
+ * Null on write.
+ * @count:     Number of bytes to read / write.
+ * @f_pos:     Pointer to current file position.
+ * @write:     1 for read, 0 for write.
+ *
+ * This function implements read / write into ttm buffer objects, and is
+ * intended to
+ * be called from the fops::read and fops::write method.
+ * Returns:
+ * See man (2) write, man(2) read. In particular,
+ * the function may return -EINTR if
+ * interrupted by a signal.
+ */
+
+extern ssize_t ttm_bo_io(struct ttm_bo_device *bdev, struct file *filp,
+			 const char __user *wbuf, char __user *rbuf,
+			 size_t count, loff_t *f_pos, bool write);
+
+extern void ttm_bo_swapout_all(struct ttm_bo_device *bdev);
+
+#endif
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
new file mode 100644
index 00000000000..62ed733c52a
--- /dev/null
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -0,0 +1,867 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 Vmware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+#ifndef _TTM_BO_DRIVER_H_
+#define _TTM_BO_DRIVER_H_
+
+#include "ttm/ttm_bo_api.h"
+#include "ttm/ttm_memory.h"
+#include "drm_mm.h"
+#include "linux/workqueue.h"
+#include "linux/fs.h"
+#include "linux/spinlock.h"
+
+struct ttm_backend;
+
+struct ttm_backend_func {
+	/**
+	 * struct ttm_backend_func member populate
+	 *
+	 * @backend: Pointer to a struct ttm_backend.
+	 * @num_pages: Number of pages to populate.
+	 * @pages: Array of pointers to ttm pages.
+	 * @dummy_read_page: Page to be used instead of NULL pages in the
+	 * array @pages.
+	 *
+	 * Populate the backend with ttm pages. Depending on the backend,
+	 * it may or may not copy the @pages array.
+	 */
+	int (*populate) (struct ttm_backend *backend,
+			 unsigned long num_pages, struct page **pages,
+			 struct page *dummy_read_page);
+	/**
+	 * struct ttm_backend_func member clear
+	 *
+	 * @backend: Pointer to a struct ttm_backend.
+	 *
+	 * This is an "unpopulate" function. Release all resources
+	 * allocated with populate.
+	 */
+	void (*clear) (struct ttm_backend *backend);
+
+	/**
+	 * struct ttm_backend_func member bind
+	 *
+	 * @backend: Pointer to a struct ttm_backend.
+	 * @bo_mem: Pointer to a struct ttm_mem_reg describing the
+	 * memory type and location for binding.
+	 *
+	 * Bind the backend pages into the aperture in the location
+	 * indicated by @bo_mem. This function should be able to handle
+	 * differences between aperture- and system page sizes.
+	 */
+	int (*bind) (struct ttm_backend *backend, struct ttm_mem_reg *bo_mem);
+
+	/**
+	 * struct ttm_backend_func member unbind
+	 *
+	 * @backend: Pointer to a struct ttm_backend.
+	 *
+	 * Unbind previously bound backend pages. This function should be
+	 * able to handle differences between aperture- and system page sizes.
+	 */
+	int (*unbind) (struct ttm_backend *backend);
+
+	/**
+	 * struct ttm_backend_func member destroy
+	 *
+	 * @backend: Pointer to a struct ttm_backend.
+	 *
+	 * Destroy the backend.
+	 */
+	void (*destroy) (struct ttm_backend *backend);
+};
+
+/**
+ * struct ttm_backend
+ *
+ * @bdev: Pointer to a struct ttm_bo_device.
+ * @flags: For driver use.
+ * @func: Pointer to a struct ttm_backend_func that describes
+ * the backend methods.
+ *
+ */
+
+struct ttm_backend {
+	struct ttm_bo_device *bdev;
+	uint32_t flags;
+	struct ttm_backend_func *func;
+};
+
+#define TTM_PAGE_FLAG_VMALLOC         (1 << 0)
+#define TTM_PAGE_FLAG_USER            (1 << 1)
+#define TTM_PAGE_FLAG_USER_DIRTY      (1 << 2)
+#define TTM_PAGE_FLAG_WRITE           (1 << 3)
+#define TTM_PAGE_FLAG_SWAPPED         (1 << 4)
+#define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
+#define TTM_PAGE_FLAG_ZERO_ALLOC      (1 << 6)
+
+enum ttm_caching_state {
+	tt_uncached,
+	tt_wc,
+	tt_cached
+};
+
+/**
+ * struct ttm_tt
+ *
+ * @dummy_read_page: Page to map where the ttm_tt page array contains a NULL
+ * pointer.
+ * @pages: Array of pages backing the data.
+ * @first_himem_page: Himem pages are put last in the page array, which
+ * enables us to run caching attribute changes on only the first part
+ * of the page array containing lomem pages. This is the index of the
+ * first himem page.
+ * @last_lomem_page: Index of the last lomem page in the page array.
+ * @num_pages: Number of pages in the page array.
+ * @bdev: Pointer to the current struct ttm_bo_device.
+ * @be: Pointer to the ttm backend.
+ * @tsk: The task for user ttm.
+ * @start: virtual address for user ttm.
+ * @swap_storage: Pointer to shmem struct file for swap storage.
+ * @caching_state: The current caching state of the pages.
+ * @state: The current binding state of the pages.
+ *
+ * This is a structure holding the pages, caching- and aperture binding
+ * status for a buffer object that isn't backed by fixed (VRAM / AGP)
+ * memory.
+ */
+
+struct ttm_tt {
+	struct page *dummy_read_page;
+	struct page **pages;
+	long first_himem_page;
+	long last_lomem_page;
+	uint32_t page_flags;
+	unsigned long num_pages;
+	struct ttm_bo_device *bdev;
+	struct ttm_backend *be;
+	struct task_struct *tsk;
+	unsigned long start;
+	struct file *swap_storage;
+	enum ttm_caching_state caching_state;
+	enum {
+		tt_bound,
+		tt_unbound,
+		tt_unpopulated,
+	} state;
+};
+
+#define TTM_MEMTYPE_FLAG_FIXED         (1 << 0)	/* Fixed (on-card) PCI memory */
+#define TTM_MEMTYPE_FLAG_MAPPABLE      (1 << 1)	/* Memory mappable */
+#define TTM_MEMTYPE_FLAG_NEEDS_IOREMAP (1 << 2)	/* Fixed memory needs ioremap
+						   before kernel access. */
+#define TTM_MEMTYPE_FLAG_CMA           (1 << 3)	/* Can't map aperture */
+
+/**
+ * struct ttm_mem_type_manager
+ *
+ * @has_type: The memory type has been initialized.
+ * @use_type: The memory type is enabled.
+ * @flags: TTM_MEMTYPE_XX flags identifying the traits of the memory
+ * managed by this memory type.
+ * @gpu_offset: If used, the GPU offset of the first managed page of
+ * fixed memory or the first managed location in an aperture.
+ * @io_offset: The io_offset of the first managed page of IO memory or
+ * the first managed location in an aperture. For TTM_MEMTYPE_FLAG_CMA
+ * memory, this should be set to NULL.
+ * @io_size: The size of a managed IO region (fixed memory or aperture).
+ * @io_addr: Virtual kernel address if the io region is pre-mapped. For
+ * TTM_MEMTYPE_FLAG_NEEDS_IOREMAP there is no pre-mapped io map and
+ * @io_addr should be set to NULL.
+ * @size: Size of the managed region.
+ * @available_caching: A mask of available caching types, TTM_PL_FLAG_XX,
+ * as defined in ttm_placement_common.h
+ * @default_caching: The default caching policy used for a buffer object
+ * placed in this memory type if the user doesn't provide one.
+ * @manager: The range manager used for this memory type. FIXME: If the aperture
+ * has a page size different from the underlying system, the granularity
+ * of this manager should take care of this. But the range allocating code
+ * in ttm_bo.c needs to be modified for this.
+ * @lru: The lru list for this memory type.
+ *
+ * This structure is used to identify and manage memory types for a device.
+ * It's set up by the ttm_bo_driver::init_mem_type method.
+ */
+
+struct ttm_mem_type_manager {
+
+	/*
+	 * No protection. Constant from start.
+	 */
+
+	bool has_type;
+	bool use_type;
+	uint32_t flags;
+	unsigned long gpu_offset;
+	unsigned long io_offset;
+	unsigned long io_size;
+	void *io_addr;
+	uint64_t size;
+	uint32_t available_caching;
+	uint32_t default_caching;
+
+	/*
+	 * Protected by the bdev->lru_lock.
+	 * TODO: Consider one lru_lock per ttm_mem_type_manager.
+	 * Plays ill with list removal, though.
+	 */
+
+	struct drm_mm manager;
+	struct list_head lru;
+};
+
+/**
+ * struct ttm_bo_driver
+ *
+ * @mem_type_prio: Priority array of memory types to place a buffer object in
+ * if it fits without evicting buffers from any of these memory types.
+ * @mem_busy_prio: Priority array of memory types to place a buffer object in
+ * if it needs to evict buffers to make room.
+ * @num_mem_type_prio: Number of elements in the @mem_type_prio array.
+ * @num_mem_busy_prio: Number of elements in the @num_mem_busy_prio array.
+ * @create_ttm_backend_entry: Callback to create a struct ttm_backend.
+ * @invalidate_caches: Callback to invalidate read caches when a buffer object
+ * has been evicted.
+ * @init_mem_type: Callback to initialize a struct ttm_mem_type_manager
+ * structure.
+ * @evict_flags: Callback to obtain placement flags when a buffer is evicted.
+ * @move: Callback for a driver to hook in accelerated functions to
+ * move a buffer.
+ * If set to NULL, a potentially slow memcpy() move is used.
+ * @sync_obj_signaled: See ttm_fence_api.h
+ * @sync_obj_wait: See ttm_fence_api.h
+ * @sync_obj_flush: See ttm_fence_api.h
+ * @sync_obj_unref: See ttm_fence_api.h
+ * @sync_obj_ref: See ttm_fence_api.h
+ */
+
+struct ttm_bo_driver {
+	const uint32_t *mem_type_prio;
+	const uint32_t *mem_busy_prio;
+	uint32_t num_mem_type_prio;
+	uint32_t num_mem_busy_prio;
+
+	/**
+	 * struct ttm_bo_driver member create_ttm_backend_entry
+	 *
+	 * @bdev: The buffer object device.
+	 *
+	 * Create a driver specific struct ttm_backend.
+	 */
+
+	struct ttm_backend *(*create_ttm_backend_entry)
+	 (struct ttm_bo_device *bdev);
+
+	/**
+	 * struct ttm_bo_driver member invalidate_caches
+	 *
+	 * @bdev: the buffer object device.
+	 * @flags: new placement of the rebound buffer object.
+	 *
+	 * A previosly evicted buffer has been rebound in a
+	 * potentially new location. Tell the driver that it might
+	 * consider invalidating read (texture) caches on the next command
+	 * submission as a consequence.
+	 */
+
+	int (*invalidate_caches) (struct ttm_bo_device *bdev, uint32_t flags);
+	int (*init_mem_type) (struct ttm_bo_device *bdev, uint32_t type,
+			      struct ttm_mem_type_manager *man);
+	/**
+	 * struct ttm_bo_driver member evict_flags:
+	 *
+	 * @bo: the buffer object to be evicted
+	 *
+	 * Return the bo flags for a buffer which is not mapped to the hardware.
+	 * These will be placed in proposed_flags so that when the move is
+	 * finished, they'll end up in bo->mem.flags
+	 */
+
+	 uint32_t(*evict_flags) (struct ttm_buffer_object *bo);
+	/**
+	 * struct ttm_bo_driver member move:
+	 *
+	 * @bo: the buffer to move
+	 * @evict: whether this motion is evicting the buffer from
+	 * the graphics address space
+	 * @interruptible: Use interruptible sleeps if possible when sleeping.
+	 * @no_wait: whether this should give up and return -EBUSY
+	 * if this move would require sleeping
+	 * @new_mem: the new memory region receiving the buffer
+	 *
+	 * Move a buffer between two memory regions.
+	 */
+	int (*move) (struct ttm_buffer_object *bo,
+		     bool evict, bool interruptible,
+		     bool no_wait, struct ttm_mem_reg *new_mem);
+
+	/**
+	 * struct ttm_bo_driver_member verify_access
+	 *
+	 * @bo: Pointer to a buffer object.
+	 * @filp: Pointer to a struct file trying to access the object.
+	 *
+	 * Called from the map / write / read methods to verify that the
+	 * caller is permitted to access the buffer object.
+	 * This member may be set to NULL, which will refuse this kind of
+	 * access for all buffer objects.
+	 * This function should return 0 if access is granted, -EPERM otherwise.
+	 */
+	int (*verify_access) (struct ttm_buffer_object *bo,
+			      struct file *filp);
+
+	/**
+	 * In case a driver writer dislikes the TTM fence objects,
+	 * the driver writer can replace those with sync objects of
+	 * his / her own. If it turns out that no driver writer is
+	 * using these. I suggest we remove these hooks and plug in
+	 * fences directly. The bo driver needs the following functionality:
+	 * See the corresponding functions in the fence object API
+	 * documentation.
+	 */
+
+	bool (*sync_obj_signaled) (void *sync_obj, void *sync_arg);
+	int (*sync_obj_wait) (void *sync_obj, void *sync_arg,
+			      bool lazy, bool interruptible);
+	int (*sync_obj_flush) (void *sync_obj, void *sync_arg);
+	void (*sync_obj_unref) (void **sync_obj);
+	void *(*sync_obj_ref) (void *sync_obj);
+};
+
+#define TTM_NUM_MEM_TYPES 8
+
+#define TTM_BO_PRIV_FLAG_MOVING  0	/* Buffer object is moving and needs
+					   idling before CPU mapping */
+#define TTM_BO_PRIV_FLAG_MAX 1
+/**
+ * struct ttm_bo_device - Buffer object driver device-specific data.
+ *
+ * @mem_glob: Pointer to a struct ttm_mem_global object for accounting.
+ * @driver: Pointer to a struct ttm_bo_driver struct setup by the driver.
+ * @count: Current number of buffer object.
+ * @pages: Current number of pinned pages.
+ * @dummy_read_page: Pointer to a dummy page used for mapping requests
+ * of unpopulated pages.
+ * @shrink: A shrink callback object used for buffre object swap.
+ * @ttm_bo_extra_size: Extra size (sizeof(struct ttm_buffer_object) excluded)
+ * used by a buffer object. This is excluding page arrays and backing pages.
+ * @ttm_bo_size: This is @ttm_bo_extra_size + sizeof(struct ttm_buffer_object).
+ * @man: An array of mem_type_managers.
+ * @addr_space_mm: Range manager for the device address space.
+ * lru_lock: Spinlock that protects the buffer+device lru lists and
+ * ddestroy lists.
+ * @nice_mode: Try nicely to wait for buffer idle when cleaning a manager.
+ * If a GPU lockup has been detected, this is forced to 0.
+ * @dev_mapping: A pointer to the struct address_space representing the
+ * device address space.
+ * @wq: Work queue structure for the delayed delete workqueue.
+ *
+ */
+
+struct ttm_bo_device {
+
+	/*
+	 * Constant after bo device init / atomic.
+	 */
+
+	struct ttm_mem_global *mem_glob;
+	struct ttm_bo_driver *driver;
+	struct page *dummy_read_page;
+	struct ttm_mem_shrink shrink;
+
+	size_t ttm_bo_extra_size;
+	size_t ttm_bo_size;
+
+	rwlock_t vm_lock;
+	/*
+	 * Protected by the vm lock.
+	 */
+	struct ttm_mem_type_manager man[TTM_NUM_MEM_TYPES];
+	struct rb_root addr_space_rb;
+	struct drm_mm addr_space_mm;
+
+	/*
+	 * Might want to change this to one lock per manager.
+	 */
+	spinlock_t lru_lock;
+	/*
+	 * Protected by the lru lock.
+	 */
+	struct list_head ddestroy;
+	struct list_head swap_lru;
+
+	/*
+	 * Protected by load / firstopen / lastclose /unload sync.
+	 */
+
+	bool nice_mode;
+	struct address_space *dev_mapping;
+
+	/*
+	 * Internal protection.
+	 */
+
+	struct delayed_work wq;
+};
+
+/**
+ * ttm_flag_masked
+ *
+ * @old: Pointer to the result and original value.
+ * @new: New value of bits.
+ * @mask: Mask of bits to change.
+ *
+ * Convenience function to change a number of bits identified by a mask.
+ */
+
+static inline uint32_t
+ttm_flag_masked(uint32_t *old, uint32_t new, uint32_t mask)
+{
+	*old ^= (*old ^ new) & mask;
+	return *old;
+}
+
+/**
+ * ttm_tt_create
+ *
+ * @bdev: pointer to a struct ttm_bo_device:
+ * @size: Size of the data needed backing.
+ * @page_flags: Page flags as identified by TTM_PAGE_FLAG_XX flags.
+ * @dummy_read_page: See struct ttm_bo_device.
+ *
+ * Create a struct ttm_tt to back data with system memory pages.
+ * No pages are actually allocated.
+ * Returns:
+ * NULL: Out of memory.
+ */
+extern struct ttm_tt *ttm_tt_create(struct ttm_bo_device *bdev,
+				    unsigned long size,
+				    uint32_t page_flags,
+				    struct page *dummy_read_page);
+
+/**
+ * ttm_tt_set_user:
+ *
+ * @ttm: The struct ttm_tt to populate.
+ * @tsk: A struct task_struct for which @start is a valid user-space address.
+ * @start: A valid user-space address.
+ * @num_pages: Size in pages of the user memory area.
+ *
+ * Populate a struct ttm_tt with a user-space memory area after first pinning
+ * the pages backing it.
+ * Returns:
+ * !0: Error.
+ */
+
+extern int ttm_tt_set_user(struct ttm_tt *ttm,
+			   struct task_struct *tsk,
+			   unsigned long start, unsigned long num_pages);
+
+/**
+ * ttm_ttm_bind:
+ *
+ * @ttm: The struct ttm_tt containing backing pages.
+ * @bo_mem: The struct ttm_mem_reg identifying the binding location.
+ *
+ * Bind the pages of @ttm to an aperture location identified by @bo_mem
+ */
+extern int ttm_tt_bind(struct ttm_tt *ttm, struct ttm_mem_reg *bo_mem);
+
+/**
+ * ttm_ttm_destroy:
+ *
+ * @ttm: The struct ttm_tt.
+ *
+ * Unbind, unpopulate and destroy a struct ttm_tt.
+ */
+extern void ttm_tt_destroy(struct ttm_tt *ttm);
+
+/**
+ * ttm_ttm_unbind:
+ *
+ * @ttm: The struct ttm_tt.
+ *
+ * Unbind a struct ttm_tt.
+ */
+extern void ttm_tt_unbind(struct ttm_tt *ttm);
+
+/**
+ * ttm_ttm_destroy:
+ *
+ * @ttm: The struct ttm_tt.
+ * @index: Index of the desired page.
+ *
+ * Return a pointer to the struct page backing @ttm at page
+ * index @index. If the page is unpopulated, one will be allocated to
+ * populate that index.
+ *
+ * Returns:
+ * NULL on OOM.
+ */
+extern struct page *ttm_tt_get_page(struct ttm_tt *ttm, int index);
+
+/**
+ * ttm_tt_cache_flush:
+ *
+ * @pages: An array of pointers to struct page:s to flush.
+ * @num_pages: Number of pages to flush.
+ *
+ * Flush the data of the indicated pages from the cpu caches.
+ * This is used when changing caching attributes of the pages from
+ * cache-coherent.
+ */
+extern void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages);
+
+/**
+ * ttm_tt_set_placement_caching:
+ *
+ * @ttm A struct ttm_tt the backing pages of which will change caching policy.
+ * @placement: Flag indicating the desired caching policy.
+ *
+ * This function will change caching policy of any default kernel mappings of
+ * the pages backing @ttm. If changing from cached to uncached or
+ * write-combined,
+ * all CPU caches will first be flushed to make sure the data of the pages
+ * hit RAM. This function may be very costly as it involves global TLB
+ * and cache flushes and potential page splitting / combining.
+ */
+extern int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement);
+extern int ttm_tt_swapout(struct ttm_tt *ttm,
+			  struct file *persistant_swap_storage);
+
+/*
+ * ttm_bo.c
+ */
+
+/**
+ * ttm_mem_reg_is_pci
+ *
+ * @bdev: Pointer to a struct ttm_bo_device.
+ * @mem: A valid struct ttm_mem_reg.
+ *
+ * Returns true if the memory described by @mem is PCI memory,
+ * false otherwise.
+ */
+extern bool ttm_mem_reg_is_pci(struct ttm_bo_device *bdev,
+				   struct ttm_mem_reg *mem);
+
+/**
+ * ttm_bo_mem_space
+ *
+ * @bo: Pointer to a struct ttm_buffer_object. the data of which
+ * we want to allocate space for.
+ * @proposed_placement: Proposed new placement for the buffer object.
+ * @mem: A struct ttm_mem_reg.
+ * @interruptible: Sleep interruptible when sliping.
+ * @no_wait: Don't sleep waiting for space to become available.
+ *
+ * Allocate memory space for the buffer object pointed to by @bo, using
+ * the placement flags in @mem, potentially evicting other idle buffer objects.
+ * This function may sleep while waiting for space to become available.
+ * Returns:
+ * -EBUSY: No space available (only if no_wait == 1).
+ * -ENOMEM: Could not allocate memory for the buffer object, either due to
+ * fragmentation or concurrent allocators.
+ * -ERESTART: An interruptible sleep was interrupted by a signal.
+ */
+extern int ttm_bo_mem_space(struct ttm_buffer_object *bo,
+			    uint32_t proposed_placement,
+			    struct ttm_mem_reg *mem,
+			    bool interruptible, bool no_wait);
+/**
+ * ttm_bo_wait_for_cpu
+ *
+ * @bo: Pointer to a struct ttm_buffer_object.
+ * @no_wait: Don't sleep while waiting.
+ *
+ * Wait until a buffer object is no longer sync'ed for CPU access.
+ * Returns:
+ * -EBUSY: Buffer object was sync'ed for CPU access. (only if no_wait == 1).
+ * -ERESTART: An interruptible sleep was interrupted by a signal.
+ */
+
+extern int ttm_bo_wait_cpu(struct ttm_buffer_object *bo, bool no_wait);
+
+/**
+ * ttm_bo_pci_offset - Get the PCI offset for the buffer object memory.
+ *
+ * @bo Pointer to a struct ttm_buffer_object.
+ * @bus_base On return the base of the PCI region
+ * @bus_offset On return the byte offset into the PCI region
+ * @bus_size On return the byte size of the buffer object or zero if
+ * the buffer object memory is not accessible through a PCI region.
+ *
+ * Returns:
+ * -EINVAL if the buffer object is currently not mappable.
+ * 0 otherwise.
+ */
+
+extern int ttm_bo_pci_offset(struct ttm_bo_device *bdev,
+			     struct ttm_mem_reg *mem,
+			     unsigned long *bus_base,
+			     unsigned long *bus_offset,
+			     unsigned long *bus_size);
+
+extern int ttm_bo_device_release(struct ttm_bo_device *bdev);
+
+/**
+ * ttm_bo_device_init
+ *
+ * @bdev: A pointer to a struct ttm_bo_device to initialize.
+ * @mem_global: A pointer to an initialized struct ttm_mem_global.
+ * @driver: A pointer to a struct ttm_bo_driver set up by the caller.
+ * @file_page_offset: Offset into the device address space that is available
+ * for buffer data. This ensures compatibility with other users of the
+ * address space.
+ *
+ * Initializes a struct ttm_bo_device:
+ * Returns:
+ * !0: Failure.
+ */
+extern int ttm_bo_device_init(struct ttm_bo_device *bdev,
+			      struct ttm_mem_global *mem_glob,
+			      struct ttm_bo_driver *driver,
+			      uint64_t file_page_offset);
+
+/**
+ * ttm_bo_reserve:
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @interruptible: Sleep interruptible if waiting.
+ * @no_wait: Don't sleep while trying to reserve, rather return -EBUSY.
+ * @use_sequence: If @bo is already reserved, Only sleep waiting for
+ * it to become unreserved if @sequence < (@bo)->sequence.
+ *
+ * Locks a buffer object for validation. (Or prevents other processes from
+ * locking it for validation) and removes it from lru lists, while taking
+ * a number of measures to prevent deadlocks.
+ *
+ * Deadlocks may occur when two processes try to reserve multiple buffers in
+ * different order, either by will or as a result of a buffer being evicted
+ * to make room for a buffer already reserved. (Buffers are reserved before
+ * they are evicted). The following algorithm prevents such deadlocks from
+ * occuring:
+ * 1) Buffers are reserved with the lru spinlock held. Upon successful
+ * reservation they are removed from the lru list. This stops a reserved buffer
+ * from being evicted. However the lru spinlock is released between the time
+ * a buffer is selected for eviction and the time it is reserved.
+ * Therefore a check is made when a buffer is reserved for eviction, that it
+ * is still the first buffer in the lru list, before it is removed from the
+ * list. @check_lru == 1 forces this check. If it fails, the function returns
+ * -EINVAL, and the caller should then choose a new buffer to evict and repeat
+ * the procedure.
+ * 2) Processes attempting to reserve multiple buffers other than for eviction,
+ * (typically execbuf), should first obtain a unique 32-bit
+ * validation sequence number,
+ * and call this function with @use_sequence == 1 and @sequence == the unique
+ * sequence number. If upon call of this function, the buffer object is already
+ * reserved, the validation sequence is checked against the validation
+ * sequence of the process currently reserving the buffer,
+ * and if the current validation sequence is greater than that of the process
+ * holding the reservation, the function returns -EAGAIN. Otherwise it sleeps
+ * waiting for the buffer to become unreserved, after which it retries
+ * reserving.
+ * The caller should, when receiving an -EAGAIN error
+ * release all its buffer reservations, wait for @bo to become unreserved, and
+ * then rerun the validation with the same validation sequence. This procedure
+ * will always guarantee that the process with the lowest validation sequence
+ * will eventually succeed, preventing both deadlocks and starvation.
+ *
+ * Returns:
+ * -EAGAIN: The reservation may cause a deadlock.
+ * Release all buffer reservations, wait for @bo to become unreserved and
+ * try again. (only if use_sequence == 1).
+ * -ERESTART: A wait for the buffer to become unreserved was interrupted by
+ * a signal. Release all buffer reservations and return to user-space.
+ */
+extern int ttm_bo_reserve(struct ttm_buffer_object *bo,
+			  bool interruptible,
+			  bool no_wait, bool use_sequence, uint32_t sequence);
+
+/**
+ * ttm_bo_unreserve
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ *
+ * Unreserve a previous reservation of @bo.
+ */
+extern void ttm_bo_unreserve(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_wait_unreserved
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ *
+ * Wait for a struct ttm_buffer_object to become unreserved.
+ * This is typically used in the execbuf code to relax cpu-usage when
+ * a potential deadlock condition backoff.
+ */
+extern int ttm_bo_wait_unreserved(struct ttm_buffer_object *bo,
+				  bool interruptible);
+
+/**
+ * ttm_bo_block_reservation
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @interruptible: Use interruptible sleep when waiting.
+ * @no_wait: Don't sleep, but rather return -EBUSY.
+ *
+ * Block reservation for validation by simply reserving the buffer.
+ * This is intended for single buffer use only without eviction,
+ * and thus needs no deadlock protection.
+ *
+ * Returns:
+ * -EBUSY: If no_wait == 1 and the buffer is already reserved.
+ * -ERESTART: If interruptible == 1 and the process received a signal
+ * while sleeping.
+ */
+extern int ttm_bo_block_reservation(struct ttm_buffer_object *bo,
+				    bool interruptible, bool no_wait);
+
+/**
+ * ttm_bo_unblock_reservation
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ *
+ * Unblocks reservation leaving lru lists untouched.
+ */
+extern void ttm_bo_unblock_reservation(struct ttm_buffer_object *bo);
+
+/*
+ * ttm_bo_util.c
+ */
+
+/**
+ * ttm_bo_move_ttm
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @evict: 1: This is an eviction. Don't try to pipeline.
+ * @no_wait: Never sleep, but rather return with -EBUSY.
+ * @new_mem: struct ttm_mem_reg indicating where to move.
+ *
+ * Optimized move function for a buffer object with both old and
+ * new placement backed by a TTM. The function will, if successful,
+ * free any old aperture space, and set (@new_mem)->mm_node to NULL,
+ * and update the (@bo)->mem placement flags. If unsuccessful, the old
+ * data remains untouched, and it's up to the caller to free the
+ * memory space indicated by @new_mem.
+ * Returns:
+ * !0: Failure.
+ */
+
+extern int ttm_bo_move_ttm(struct ttm_buffer_object *bo,
+			   bool evict, bool no_wait,
+			   struct ttm_mem_reg *new_mem);
+
+/**
+ * ttm_bo_move_memcpy
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @evict: 1: This is an eviction. Don't try to pipeline.
+ * @no_wait: Never sleep, but rather return with -EBUSY.
+ * @new_mem: struct ttm_mem_reg indicating where to move.
+ *
+ * Fallback move function for a mappable buffer object in mappable memory.
+ * The function will, if successful,
+ * free any old aperture space, and set (@new_mem)->mm_node to NULL,
+ * and update the (@bo)->mem placement flags. If unsuccessful, the old
+ * data remains untouched, and it's up to the caller to free the
+ * memory space indicated by @new_mem.
+ * Returns:
+ * !0: Failure.
+ */
+
+extern int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
+			      bool evict,
+			      bool no_wait, struct ttm_mem_reg *new_mem);
+
+/**
+ * ttm_bo_free_old_node
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ *
+ * Utility function to free an old placement after a successful move.
+ */
+extern void ttm_bo_free_old_node(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_move_accel_cleanup.
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @sync_obj: A sync object that signals when moving is complete.
+ * @sync_obj_arg: An argument to pass to the sync object idle / wait
+ * functions.
+ * @evict: This is an evict move. Don't return until the buffer is idle.
+ * @no_wait: Never sleep, but rather return with -EBUSY.
+ * @new_mem: struct ttm_mem_reg indicating where to move.
+ *
+ * Accelerated move function to be called when an accelerated move
+ * has been scheduled. The function will create a new temporary buffer object
+ * representing the old placement, and put the sync object on both buffer
+ * objects. After that the newly created buffer object is unref'd to be
+ * destroyed when the move is complete. This will help pipeline
+ * buffer moves.
+ */
+
+extern int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
+				     void *sync_obj,
+				     void *sync_obj_arg,
+				     bool evict, bool no_wait,
+				     struct ttm_mem_reg *new_mem);
+/**
+ * ttm_io_prot
+ *
+ * @c_state: Caching state.
+ * @tmp: Page protection flag for a normal, cached mapping.
+ *
+ * Utility function that returns the pgprot_t that should be used for
+ * setting up a PTE with the caching model indicated by @c_state.
+ */
+extern pgprot_t ttm_io_prot(enum ttm_caching_state c_state, pgprot_t tmp);
+
+#if (defined(CONFIG_AGP) || (defined(CONFIG_AGP_MODULE) && defined(MODULE)))
+#define TTM_HAS_AGP
+#include <linux/agp_backend.h>
+
+/**
+ * ttm_agp_backend_init
+ *
+ * @bdev: Pointer to a struct ttm_bo_device.
+ * @bridge: The agp bridge this device is sitting on.
+ *
+ * Create a TTM backend that uses the indicated AGP bridge as an aperture
+ * for TT memory. This function uses the linux agpgart interface to
+ * bind and unbind memory backing a ttm_tt.
+ */
+extern struct ttm_backend *ttm_agp_backend_init(struct ttm_bo_device *bdev,
+						struct agp_bridge_data *bridge);
+#endif
+
+#endif
diff --git a/include/drm/ttm/ttm_memory.h b/include/drm/ttm/ttm_memory.h
new file mode 100644
index 00000000000..d8b8f042c4f
--- /dev/null
+++ b/include/drm/ttm/ttm_memory.h
@@ -0,0 +1,153 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+#ifndef TTM_MEMORY_H
+#define TTM_MEMORY_H
+
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/errno.h>
+
+/**
+ * struct ttm_mem_shrink - callback to shrink TTM memory usage.
+ *
+ * @do_shrink: The callback function.
+ *
+ * Arguments to the do_shrink functions are intended to be passed using
+ * inheritance. That is, the argument class derives from struct ttm_mem_srink,
+ * and can be accessed using container_of().
+ */
+
+struct ttm_mem_shrink {
+	int (*do_shrink) (struct ttm_mem_shrink *);
+};
+
+/**
+ * struct ttm_mem_global - Global memory accounting structure.
+ *
+ * @shrink: A single callback to shrink TTM memory usage. Extend this
+ * to a linked list to be able to handle multiple callbacks when needed.
+ * @swap_queue: A workqueue to handle shrinking in low memory situations. We
+ * need a separate workqueue since it will spend a lot of time waiting
+ * for the GPU, and this will otherwise block other workqueue tasks(?)
+ * At this point we use only a single-threaded workqueue.
+ * @work: The workqueue callback for the shrink queue.
+ * @queue: Wait queue for processes suspended waiting for memory.
+ * @lock: Lock to protect the @shrink - and the memory accounting members,
+ * that is, essentially the whole structure with some exceptions.
+ * @emer_memory: Lowmem memory limit available for root.
+ * @max_memory: Lowmem memory limit available for non-root.
+ * @swap_limit: Lowmem memory limit where the shrink workqueue kicks in.
+ * @used_memory: Currently used lowmem memory.
+ * @used_total_memory: Currently used total (lowmem + highmem) memory.
+ * @total_memory_swap_limit: Total memory limit where the shrink workqueue
+ * kicks in.
+ * @max_total_memory: Total memory available to non-root processes.
+ * @emer_total_memory: Total memory available to root processes.
+ *
+ * Note that this structure is not per device. It should be global for all
+ * graphics devices.
+ */
+
+struct ttm_mem_global {
+	struct ttm_mem_shrink *shrink;
+	struct workqueue_struct *swap_queue;
+	struct work_struct work;
+	wait_queue_head_t queue;
+	spinlock_t lock;
+	uint64_t emer_memory;
+	uint64_t max_memory;
+	uint64_t swap_limit;
+	uint64_t used_memory;
+	uint64_t used_total_memory;
+	uint64_t total_memory_swap_limit;
+	uint64_t max_total_memory;
+	uint64_t emer_total_memory;
+};
+
+/**
+ * ttm_mem_init_shrink - initialize a struct ttm_mem_shrink object
+ *
+ * @shrink: The object to initialize.
+ * @func: The callback function.
+ */
+
+static inline void ttm_mem_init_shrink(struct ttm_mem_shrink *shrink,
+				       int (*func) (struct ttm_mem_shrink *))
+{
+	shrink->do_shrink = func;
+}
+
+/**
+ * ttm_mem_register_shrink - register a struct ttm_mem_shrink object.
+ *
+ * @glob: The struct ttm_mem_global object to register with.
+ * @shrink: An initialized struct ttm_mem_shrink object to register.
+ *
+ * Returns:
+ * -EBUSY: There's already a callback registered. (May change).
+ */
+
+static inline int ttm_mem_register_shrink(struct ttm_mem_global *glob,
+					  struct ttm_mem_shrink *shrink)
+{
+	spin_lock(&glob->lock);
+	if (glob->shrink != NULL) {
+		spin_unlock(&glob->lock);
+		return -EBUSY;
+	}
+	glob->shrink = shrink;
+	spin_unlock(&glob->lock);
+	return 0;
+}
+
+/**
+ * ttm_mem_unregister_shrink - unregister a struct ttm_mem_shrink object.
+ *
+ * @glob: The struct ttm_mem_global object to unregister from.
+ * @shrink: A previously registert struct ttm_mem_shrink object.
+ *
+ */
+
+static inline void ttm_mem_unregister_shrink(struct ttm_mem_global *glob,
+					     struct ttm_mem_shrink *shrink)
+{
+	spin_lock(&glob->lock);
+	BUG_ON(glob->shrink != shrink);
+	glob->shrink = NULL;
+	spin_unlock(&glob->lock);
+}
+
+extern int ttm_mem_global_init(struct ttm_mem_global *glob);
+extern void ttm_mem_global_release(struct ttm_mem_global *glob);
+extern int ttm_mem_global_alloc(struct ttm_mem_global *glob, uint64_t memory,
+				bool no_wait, bool interruptible, bool himem);
+extern void ttm_mem_global_free(struct ttm_mem_global *glob,
+				uint64_t amount, bool himem);
+extern size_t ttm_round_pot(size_t size);
+#endif
diff --git a/include/drm/ttm/ttm_module.h b/include/drm/ttm/ttm_module.h
new file mode 100644
index 00000000000..889a4c7958a
--- /dev/null
+++ b/include/drm/ttm/ttm_module.h
@@ -0,0 +1,58 @@
+/**************************************************************************
+ *
+ * Copyright 2008-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _TTM_MODULE_H_
+#define _TTM_MODULE_H_
+
+#include <linux/kernel.h>
+
+#define TTM_PFX "[TTM]"
+
+enum ttm_global_types {
+	TTM_GLOBAL_TTM_MEM = 0,
+	TTM_GLOBAL_TTM_BO,
+	TTM_GLOBAL_TTM_OBJECT,
+	TTM_GLOBAL_NUM
+};
+
+struct ttm_global_reference {
+	enum ttm_global_types global_type;
+	size_t size;
+	void *object;
+	int (*init) (struct ttm_global_reference *);
+	void (*release) (struct ttm_global_reference *);
+};
+
+extern void ttm_global_init(void);
+extern void ttm_global_release(void);
+extern int ttm_global_item_ref(struct ttm_global_reference *ref);
+extern void ttm_global_item_unref(struct ttm_global_reference *ref);
+
+#endif /* _TTM_MODULE_H_ */
diff --git a/include/drm/ttm/ttm_placement.h b/include/drm/ttm/ttm_placement.h
new file mode 100644
index 00000000000..c84ff153a56
--- /dev/null
+++ b/include/drm/ttm/ttm_placement.h
@@ -0,0 +1,92 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _TTM_PLACEMENT_H_
+#define _TTM_PLACEMENT_H_
+/*
+ * Memory regions for data placement.
+ */
+
+#define TTM_PL_SYSTEM           0
+#define TTM_PL_TT               1
+#define TTM_PL_VRAM             2
+#define TTM_PL_PRIV0            3
+#define TTM_PL_PRIV1            4
+#define TTM_PL_PRIV2            5
+#define TTM_PL_PRIV3            6
+#define TTM_PL_PRIV4            7
+#define TTM_PL_PRIV5            8
+#define TTM_PL_SWAPPED          15
+
+#define TTM_PL_FLAG_SYSTEM      (1 << TTM_PL_SYSTEM)
+#define TTM_PL_FLAG_TT          (1 << TTM_PL_TT)
+#define TTM_PL_FLAG_VRAM        (1 << TTM_PL_VRAM)
+#define TTM_PL_FLAG_PRIV0       (1 << TTM_PL_PRIV0)
+#define TTM_PL_FLAG_PRIV1       (1 << TTM_PL_PRIV1)
+#define TTM_PL_FLAG_PRIV2       (1 << TTM_PL_PRIV2)
+#define TTM_PL_FLAG_PRIV3       (1 << TTM_PL_PRIV3)
+#define TTM_PL_FLAG_PRIV4       (1 << TTM_PL_PRIV4)
+#define TTM_PL_FLAG_PRIV5       (1 << TTM_PL_PRIV5)
+#define TTM_PL_FLAG_SWAPPED     (1 << TTM_PL_SWAPPED)
+#define TTM_PL_MASK_MEM         0x0000FFFF
+
+/*
+ * Other flags that affects data placement.
+ * TTM_PL_FLAG_CACHED indicates cache-coherent mappings
+ * if available.
+ * TTM_PL_FLAG_SHARED means that another application may
+ * reference the buffer.
+ * TTM_PL_FLAG_NO_EVICT means that the buffer may never
+ * be evicted to make room for other buffers.
+ */
+
+#define TTM_PL_FLAG_CACHED      (1 << 16)
+#define TTM_PL_FLAG_UNCACHED    (1 << 17)
+#define TTM_PL_FLAG_WC          (1 << 18)
+#define TTM_PL_FLAG_SHARED      (1 << 20)
+#define TTM_PL_FLAG_NO_EVICT    (1 << 21)
+
+#define TTM_PL_MASK_CACHING     (TTM_PL_FLAG_CACHED | \
+				 TTM_PL_FLAG_UNCACHED | \
+				 TTM_PL_FLAG_WC)
+
+#define TTM_PL_MASK_MEMTYPE     (TTM_PL_MASK_MEM | TTM_PL_MASK_CACHING)
+
+/*
+ * Access flags to be used for CPU- and GPU- mappings.
+ * The idea is that the TTM synchronization mechanism will
+ * allow concurrent READ access and exclusive write access.
+ * Currently GPU- and CPU accesses are exclusive.
+ */
+
+#define TTM_ACCESS_READ         (1 << 0)
+#define TTM_ACCESS_WRITE        (1 << 1)
+
+#endif
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index b3afd2219ad..a2df7030d49 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -311,6 +311,7 @@ unifdef-y += ppp-comp.h
 unifdef-y += ptrace.h
 unifdef-y += quota.h
 unifdef-y += random.h
+unifdef-y += rfkill.h
 unifdef-y += irqnr.h
 unifdef-y += reboot.h
 unifdef-y += reiserfs_fs.h
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
new file mode 100644
index 00000000000..dcad0ffd175
--- /dev/null
+++ b/include/linux/amba/pl022.h
@@ -0,0 +1,264 @@
+/*
+ * include/linux/amba/pl022.h
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SSP_PL022_H
+#define _SSP_PL022_H
+
+#include <linux/device.h>
+
+/**
+ * whether SSP is in loopback mode or not
+ */
+enum ssp_loopback {
+	LOOPBACK_DISABLED,
+	LOOPBACK_ENABLED
+};
+
+/**
+ * enum ssp_interface - interfaces allowed for this SSP Controller
+ * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
+ * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
+ * interface
+ * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
+ * interface
+ * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
+ * &STn8815 only)
+ */
+enum ssp_interface {
+	SSP_INTERFACE_MOTOROLA_SPI,
+	SSP_INTERFACE_TI_SYNC_SERIAL,
+	SSP_INTERFACE_NATIONAL_MICROWIRE,
+	SSP_INTERFACE_UNIDIRECTIONAL
+};
+
+/**
+ * enum ssp_hierarchy - whether SSP is configured as Master or Slave
+ */
+enum ssp_hierarchy {
+	SSP_MASTER,
+	SSP_SLAVE
+};
+
+/**
+ * enum ssp_clock_params - clock parameters, to set SSP clock at a
+ * desired freq
+ */
+struct ssp_clock_params {
+	u8 cpsdvsr; /* value from 2 to 254 (even only!) */
+	u8 scr;	    /* value from 0 to 255 */
+};
+
+/**
+ * enum ssp_rx_endian - endianess of Rx FIFO Data
+ */
+enum ssp_rx_endian {
+	SSP_RX_MSB,
+	SSP_RX_LSB
+};
+
+/**
+ * enum ssp_tx_endian - endianess of Tx FIFO Data
+ */
+enum ssp_tx_endian {
+	SSP_TX_MSB,
+	SSP_TX_LSB
+};
+
+/**
+ * enum ssp_data_size - number of bits in one data element
+ */
+enum ssp_data_size {
+	SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
+	SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
+	SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
+	SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
+	SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
+	SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
+	SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
+	SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
+	SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
+	SSP_DATA_BITS_31, SSP_DATA_BITS_32
+};
+
+/**
+ * enum ssp_mode - SSP mode of operation (Communication modes)
+ */
+enum ssp_mode {
+	INTERRUPT_TRANSFER,
+	POLLING_TRANSFER,
+	DMA_TRANSFER
+};
+
+/**
+ * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
+ * IT: Interrupt fires when _N_ or more elements in RX FIFO.
+ */
+enum ssp_rx_level_trig {
+	SSP_RX_1_OR_MORE_ELEM,
+	SSP_RX_4_OR_MORE_ELEM,
+	SSP_RX_8_OR_MORE_ELEM,
+	SSP_RX_16_OR_MORE_ELEM,
+	SSP_RX_32_OR_MORE_ELEM
+};
+
+/**
+ * Transmit FIFO watermark level which triggers (IT Interrupt fires
+ * when _N_ or more empty locations in TX FIFO)
+ */
+enum ssp_tx_level_trig {
+	SSP_TX_1_OR_MORE_EMPTY_LOC,
+	SSP_TX_4_OR_MORE_EMPTY_LOC,
+	SSP_TX_8_OR_MORE_EMPTY_LOC,
+	SSP_TX_16_OR_MORE_EMPTY_LOC,
+	SSP_TX_32_OR_MORE_EMPTY_LOC
+};
+
+/**
+ * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
+ * @SSP_CLK_RISING_EDGE: Receive data on rising edge
+ * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ */
+enum ssp_spi_clk_phase {
+	SSP_CLK_RISING_EDGE,
+	SSP_CLK_FALLING_EDGE
+};
+
+/**
+ * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
+ * @SSP_CLK_POL_IDLE_LOW: Low inactive level
+ * @SSP_CLK_POL_IDLE_HIGH: High inactive level
+ */
+enum ssp_spi_clk_pol {
+	SSP_CLK_POL_IDLE_LOW,
+	SSP_CLK_POL_IDLE_HIGH
+};
+
+/**
+ * Microwire Conrol Lengths Command size in microwire format
+ */
+enum ssp_microwire_ctrl_len {
+	SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
+	SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
+	SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
+	SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
+	SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
+	SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
+	SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
+	SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
+	SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
+	SSP_BITS_31, SSP_BITS_32
+};
+
+/**
+ * enum Microwire Wait State
+ * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
+ * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
+ */
+enum ssp_microwire_wait_state {
+	SSP_MWIRE_WAIT_ZERO,
+	SSP_MWIRE_WAIT_ONE
+};
+
+/**
+ * enum Microwire - whether Full/Half Duplex
+ * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
+ *     SSPRXD not used
+ * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
+ *     an input.
+ */
+enum ssp_duplex {
+	SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
+};
+
+/**
+ * CHIP select/deselect commands
+ */
+enum ssp_chip_select {
+	SSP_CHIP_SELECT,
+	SSP_CHIP_DESELECT
+};
+
+
+/**
+ * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *     SPI slaves, and are numbered from zero to num_chipselects - 1.
+ *     each slave has a chipselect signal, but it's common that not
+ *     every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+ */
+struct pl022_ssp_controller {
+	u16 bus_id;
+	u8 num_chipselect;
+	u8 enable_dma:1;
+};
+
+/**
+ * struct ssp_config_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ *
+ * @lbm: used for test purpose to internally connect RX and TX
+ * @iface: Interface type(Motorola, TI, Microwire, Universal)
+ * @hierarchy: sets whether interface is master or slave
+ * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
+ * @clk_freq: Tune freq parameters of SSP(when in master mode)
+ * @endian_rx: Endianess of Data in Rx FIFO
+ * @endian_tx: Endianess of Data in Tx FIFO
+ * @data_size: Width of data element(4 to 32 bits)
+ * @com_mode: communication mode: polling, Interrupt or DMA
+ * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
+ * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
+ * @clk_phase: Motorola SPI interface Clock phase
+ * @clk_pol: Motorola SPI interface Clock polarity
+ * @ctrl_len: Microwire interface: Control length
+ * @wait_state: Microwire interface: Wait state
+ * @duplex: Microwire interface: Full/Half duplex
+ * @cs_control: function pointer to board-specific function to
+ * assert/deassert I/O port to control HW generation of devices chip-select.
+ * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
+ * @dma_config: DMA configuration for SSP controller and peripheral
+ */
+struct pl022_config_chip {
+	struct device *dev;
+	enum ssp_loopback lbm;
+	enum ssp_interface iface;
+	enum ssp_hierarchy hierarchy;
+	bool slave_tx_disable;
+	struct ssp_clock_params clk_freq;
+	enum ssp_rx_endian endian_rx;
+	enum ssp_tx_endian endian_tx;
+	enum ssp_data_size data_size;
+	enum ssp_mode com_mode;
+	enum ssp_rx_level_trig rx_lev_trig;
+	enum ssp_tx_level_trig tx_lev_trig;
+	enum ssp_spi_clk_phase clk_phase;
+	enum ssp_spi_clk_pol clk_pol;
+	enum ssp_microwire_ctrl_len ctrl_len;
+	enum ssp_microwire_wait_state wait_state;
+	enum ssp_duplex duplex;
+	void (*cs_control) (u32 control);
+};
+
+#endif /* _SSP_PL022_H */
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 64a982ea5d5..5a5a7fd6249 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -114,6 +114,9 @@
 #define UART011_IFLS_TX4_8	(2 << 0)
 #define UART011_IFLS_TX6_8	(3 << 0)
 #define UART011_IFLS_TX7_8	(4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF	(5 << 3)
+#define UART011_IFLS_TX_HALF	(5 << 0)
 
 #define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
 #define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 12737be5860..2a04eb54c0d 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -590,6 +590,11 @@ static inline void bio_list_merge_head(struct bio_list *bl,
 	bl->head = bl2->head;
 }
 
+static inline struct bio *bio_list_peek(struct bio_list *bl)
+{
+	return bl->head;
+}
+
 static inline struct bio *bio_list_pop(struct bio_list *bl)
 {
 	struct bio *bio = bl->head;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 0b1a6cae9de..8963d9149b5 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -926,6 +926,7 @@ extern void blk_queue_alignment_offset(struct request_queue *q,
 				       unsigned int alignment);
 extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
 extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
+extern void blk_set_default_limits(struct queue_limits *lim);
 extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 			    sector_t offset);
 extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
diff --git a/include/linux/bug.h b/include/linux/bug.h
index 54398d2c6d8..d276b5510c8 100644
--- a/include/linux/bug.h
+++ b/include/linux/bug.h
@@ -1,7 +1,6 @@
 #ifndef _LINUX_BUG_H
 #define _LINUX_BUG_H
 
-#include <linux/module.h>
 #include <asm/bug.h>
 
 enum bug_trap_type {
@@ -24,10 +23,6 @@ const struct bug_entry *find_bug(unsigned long bugaddr);
 
 enum bug_trap_type report_bug(unsigned long bug_addr, struct pt_regs *regs);
 
-int  module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
-			 struct module *);
-void module_bug_cleanup(struct module *);
-
 /* These are defined by the architecture */
 int is_valid_bugaddr(unsigned long addr);
 
@@ -38,13 +33,6 @@ static inline enum bug_trap_type report_bug(unsigned long bug_addr,
 {
 	return BUG_TRAP_TYPE_BUG;
 }
-static inline int  module_bug_finalize(const Elf_Ehdr *hdr,
-					const Elf_Shdr *sechdrs,
-					struct module *mod)
-{
-	return 0;
-}
-static inline void module_bug_cleanup(struct module *mod) {}
 
 #endif	/* CONFIG_GENERIC_BUG */
 #endif	/* _LINUX_BUG_H */
diff --git a/include/linux/c2port.h b/include/linux/c2port.h
index 7b5a2388ba6..2a5cd867c36 100644
--- a/include/linux/c2port.h
+++ b/include/linux/c2port.h
@@ -10,6 +10,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/kmemcheck.h>
 
 #define C2PORT_NAME_LEN			32
 
@@ -20,8 +21,10 @@
 /* Main struct */
 struct c2port_ops;
 struct c2port_device {
+	kmemcheck_bitfield_begin(flags);
 	unsigned int access:1;
 	unsigned int flash_access:1;
+	kmemcheck_bitfield_end(flags);
 
 	int id;
 	char name[C2PORT_NAME_LEN];
diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild
index eff898aac02..8cb05aae661 100644
--- a/include/linux/can/Kbuild
+++ b/include/linux/can/Kbuild
@@ -1,3 +1,4 @@
 header-y += raw.h
 header-y += bcm.h
 header-y += error.h
+header-y += netlink.h
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
new file mode 100644
index 00000000000..4a37a56f6cd
--- /dev/null
+++ b/include/linux/can/dev.h
@@ -0,0 +1,70 @@
+/*
+ * linux/can/dev.h
+ *
+ * Definitions for the CAN network device driver interface
+ *
+ * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
+ *               Varma Electronics Oy
+ *
+ * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ */
+
+#ifndef CAN_DEV_H
+#define CAN_DEV_H
+
+#include <linux/can/netlink.h>
+#include <linux/can/error.h>
+
+/*
+ * CAN mode
+ */
+enum can_mode {
+	CAN_MODE_STOP = 0,
+	CAN_MODE_START,
+	CAN_MODE_SLEEP
+};
+
+/*
+ * CAN common private data
+ */
+#define CAN_ECHO_SKB_MAX  4
+
+struct can_priv {
+	struct can_device_stats can_stats;
+
+	struct can_bittiming bittiming;
+	struct can_bittiming_const *bittiming_const;
+	struct can_clock clock;
+
+	enum can_state state;
+	u32 ctrlmode;
+
+	int restart_ms;
+	struct timer_list restart_timer;
+
+	struct sk_buff *echo_skb[CAN_ECHO_SKB_MAX];
+
+	int (*do_set_bittiming)(struct net_device *dev);
+	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
+	int (*do_get_state)(const struct net_device *dev,
+			    enum can_state *state);
+};
+
+struct net_device *alloc_candev(int sizeof_priv);
+void free_candev(struct net_device *dev);
+
+int open_candev(struct net_device *dev);
+void close_candev(struct net_device *dev);
+
+int register_candev(struct net_device *dev);
+void unregister_candev(struct net_device *dev);
+
+int can_restart_now(struct net_device *dev);
+void can_bus_off(struct net_device *dev);
+
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx);
+void can_get_echo_skb(struct net_device *dev, int idx);
+
+#endif /* CAN_DEV_H */
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
new file mode 100644
index 00000000000..9ecbb7871c0
--- /dev/null
+++ b/include/linux/can/netlink.h
@@ -0,0 +1,113 @@
+/*
+ * linux/can/netlink.h
+ *
+ * Definitions for the CAN netlink interface
+ *
+ * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ */
+
+#ifndef CAN_NETLINK_H
+#define CAN_NETLINK_H
+
+#include <linux/types.h>
+
+/*
+ * CAN bit-timing parameters
+ *
+ * For futher information, please read chapter "8 BIT TIMING
+ * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
+ * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
+ */
+struct can_bittiming {
+	__u32 bitrate;		/* Bit-rate in bits/second */
+	__u32 sample_point;	/* Sample point in one-tenth of a percent */
+	__u32 tq;		/* Time quanta (TQ) in nanoseconds */
+	__u32 prop_seg;		/* Propagation segment in TQs */
+	__u32 phase_seg1;	/* Phase buffer segment 1 in TQs */
+	__u32 phase_seg2;	/* Phase buffer segment 2 in TQs */
+	__u32 sjw;		/* Synchronisation jump width in TQs */
+	__u32 brp;		/* Bit-rate prescaler */
+};
+
+/*
+ * CAN harware-dependent bit-timing constant
+ *
+ * Used for calculating and checking bit-timing parameters
+ */
+struct can_bittiming_const {
+	char name[16];		/* Name of the CAN controller hardware */
+	__u32 tseg1_min;	/* Time segement 1 = prop_seg + phase_seg1 */
+	__u32 tseg1_max;
+	__u32 tseg2_min;	/* Time segement 2 = phase_seg2 */
+	__u32 tseg2_max;
+	__u32 sjw_max;		/* Synchronisation jump width */
+	__u32 brp_min;		/* Bit-rate prescaler */
+	__u32 brp_max;
+	__u32 brp_inc;
+};
+
+/*
+ * CAN clock parameters
+ */
+struct can_clock {
+	__u32 freq;		/* CAN system clock frequency in Hz */
+};
+
+/*
+ * CAN operational and error states
+ */
+enum can_state {
+	CAN_STATE_ERROR_ACTIVE = 0,	/* RX/TX error count < 96 */
+	CAN_STATE_ERROR_WARNING,	/* RX/TX error count < 128 */
+	CAN_STATE_ERROR_PASSIVE,	/* RX/TX error count < 256 */
+	CAN_STATE_BUS_OFF,		/* RX/TX error count >= 256 */
+	CAN_STATE_STOPPED,		/* Device is stopped */
+	CAN_STATE_SLEEPING,		/* Device is sleeping */
+	CAN_STATE_MAX
+};
+
+/*
+ * CAN controller mode
+ */
+struct can_ctrlmode {
+	__u32 mask;
+	__u32 flags;
+};
+
+#define CAN_CTRLMODE_LOOPBACK	0x1	/* Loopback mode */
+#define CAN_CTRLMODE_LISTENONLY	0x2 	/* Listen-only mode */
+#define CAN_CTRLMODE_3_SAMPLES	0x4	/* Triple sampling mode */
+
+/*
+ * CAN device statistics
+ */
+struct can_device_stats {
+	__u32 bus_error;	/* Bus errors */
+	__u32 error_warning;	/* Changes to error warning state */
+	__u32 error_passive;	/* Changes to error passive state */
+	__u32 bus_off;		/* Changes to bus off state */
+	__u32 arbitration_lost; /* Arbitration lost errors */
+	__u32 restarts;		/* CAN controller re-starts */
+};
+
+/*
+ * CAN netlink interface
+ */
+enum {
+	IFLA_CAN_UNSPEC,
+	IFLA_CAN_BITTIMING,
+	IFLA_CAN_BITTIMING_CONST,
+	IFLA_CAN_CLOCK,
+	IFLA_CAN_STATE,
+	IFLA_CAN_CTRLMODE,
+	IFLA_CAN_RESTART_MS,
+	IFLA_CAN_RESTART,
+	__IFLA_CAN_MAX
+};
+
+#define IFLA_CAN_MAX	(__IFLA_CAN_MAX - 1)
+
+#endif /* CAN_NETLINK_H */
diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h
new file mode 100644
index 00000000000..01ee2aeb048
--- /dev/null
+++ b/include/linux/can/platform/sja1000.h
@@ -0,0 +1,35 @@
+#ifndef _CAN_PLATFORM_SJA1000_H_
+#define _CAN_PLATFORM_SJA1000_H_
+
+/* clock divider register */
+#define CDR_CLKOUT_MASK 0x07
+#define CDR_CLK_OFF	0x08 /* Clock off (CLKOUT pin) */
+#define CDR_RXINPEN	0x20 /* TX1 output is RX irq output */
+#define CDR_CBP		0x40 /* CAN input comparator bypass */
+#define CDR_PELICAN	0x80 /* PeliCAN mode */
+
+/* output control register */
+#define OCR_MODE_BIPHASE  0x00
+#define OCR_MODE_TEST     0x01
+#define OCR_MODE_NORMAL   0x02
+#define OCR_MODE_CLOCK    0x03
+#define OCR_MODE_MASK     0x07
+#define OCR_TX0_INVERT    0x04
+#define OCR_TX0_PULLDOWN  0x08
+#define OCR_TX0_PULLUP    0x10
+#define OCR_TX0_PUSHPULL  0x18
+#define OCR_TX1_INVERT    0x20
+#define OCR_TX1_PULLDOWN  0x40
+#define OCR_TX1_PULLUP    0x80
+#define OCR_TX1_PUSHPULL  0xc0
+#define OCR_TX_MASK       0xfc
+#define OCR_TX_SHIFT      2
+
+struct sja1000_platform_data {
+	u32 clock;	/* CAN bus oscillator frequency in Hz */
+
+	u8 ocr;		/* output control register */
+	u8 cdr;		/* clock divider register */
+};
+
+#endif	/* !_CAN_PLATFORM_SJA1000_H_ */
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
new file mode 100644
index 00000000000..63bc9a4d292
--- /dev/null
+++ b/include/linux/cb710.h
@@ -0,0 +1,231 @@
+/*
+ *  cb710/cb710.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_DRIVER_H
+#define LINUX_CB710_DRIVER_H
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+struct cb710_slot;
+
+typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
+
+/* per-virtual-slot structure */
+struct cb710_slot {
+	struct platform_device	pdev;
+	void __iomem		*iobase;
+	cb710_irq_handler_t	irq_handler;
+};
+
+/* per-device structure */
+struct cb710_chip {
+	struct pci_dev		*pdev;
+	void __iomem		*iobase;
+	unsigned		platform_id;
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_t		slot_refs_count;
+#endif
+	unsigned		slot_mask;
+	unsigned		slots;
+	spinlock_t		irq_lock;
+	struct cb710_slot	slot[0];
+};
+
+/* NOTE: cb710_chip.slots is modified only during device init/exit and
+ * they are all serialized wrt themselves */
+
+/* cb710_chip.slot_mask values */
+#define CB710_SLOT_MMC		1
+#define CB710_SLOT_MS		2
+#define CB710_SLOT_SM		4
+
+/* slot port accessors - so the logic is more clear in the code */
+#define CB710_PORT_ACCESSORS(t) \
+static inline void cb710_write_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t value)					\
+{									\
+	iowrite##t(value, slot->iobase + port);				\
+}									\
+									\
+static inline u##t cb710_read_port_##t(struct cb710_slot *slot,		\
+	unsigned port)							\
+{									\
+	return ioread##t(slot->iobase + port);				\
+}									\
+									\
+static inline void cb710_modify_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t set, u##t clear)				\
+{									\
+	iowrite##t(							\
+		(ioread##t(slot->iobase + port) & ~clear)|set,		\
+		slot->iobase + port);					\
+}
+
+CB710_PORT_ACCESSORS(8)
+CB710_PORT_ACCESSORS(16)
+CB710_PORT_ACCESSORS(32)
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t and, uint32_t xor);
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler);
+
+/* some device struct walking */
+
+static inline struct cb710_slot *cb710_pdev_to_slot(
+	struct platform_device *pdev)
+{
+	return container_of(pdev, struct cb710_slot, pdev);
+}
+
+static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(slot->pdev.dev.parent);
+}
+
+static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
+{
+	return &slot->pdev.dev;
+}
+
+static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
+{
+	return &chip->pdev->dev;
+}
+
+/* debugging aids */
+
+#ifdef CONFIG_CB710_DEBUG
+void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
+#else
+#define cb710_dump_regs(c, d) do {} while (0)
+#endif
+
+#define CB710_DUMP_REGS_MMC	0x0F
+#define CB710_DUMP_REGS_MS	0x30
+#define CB710_DUMP_REGS_SM	0xC0
+#define CB710_DUMP_REGS_ALL	0xFF
+#define CB710_DUMP_REGS_MASK	0xFF
+
+#define CB710_DUMP_ACCESS_8	0x100
+#define CB710_DUMP_ACCESS_16	0x200
+#define CB710_DUMP_ACCESS_32	0x400
+#define CB710_DUMP_ACCESS_ALL	0x700
+#define CB710_DUMP_ACCESS_MASK	0x700
+
+#endif /* LINUX_CB710_DRIVER_H */
+/*
+ *  cb710/sgbuf2.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_SG_H
+#define LINUX_CB710_SG_H
+
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+
+/**
+ * cb710_sg_miter_stop_writing - stop mapping iteration after writing
+ * @miter: sg mapping iter to be stopped
+ *
+ * Description:
+ *   Stops mapping iterator @miter.  @miter should have been started
+ *   started using sg_miter_start().  A stopped iteration can be
+ *   resumed by calling sg_miter_next() on it.  This is useful when
+ *   resources (kmap) need to be released during iteration.
+ *
+ *   This is a convenience wrapper that will be optimized out for arches
+ *   that don't need flush_kernel_dcache_page().
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
+{
+	if (miter->page)
+		flush_kernel_dcache_page(miter->page);
+	sg_miter_stop(miter);
+}
+
+/*
+ * 32-bit PIO mapping sg iterator
+ *
+ * Hides scatterlist access issues - fragment boundaries, alignment, page
+ * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
+ * without DMA support).
+ *
+ * Best-case reading (transfer from device):
+ *   sg_miter_start();
+ *   cb710_sg_dwiter_write_from_io();
+ *   cb710_sg_miter_stop_writing();
+ *
+ * Best-case writing (transfer to device):
+ *   sg_miter_start();
+ *   cb710_sg_dwiter_read_to_io();
+ *   sg_miter_stop();
+ */
+
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
+
+/**
+ * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Reads @count 32-bit words from register @port and stores it in
+ *   buffer iterated by @miter.  Data that would overflow the buffer
+ *   is silently ignored.  Iterator is advanced by 4*@count bytes
+ *   or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		cb710_sg_dwiter_write_next_block(miter, ioread32(port));
+}
+
+/**
+ * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Writes @count 32-bit words to register @port from buffer iterated
+ *   through @miter.  If buffer ends before @count words are written
+ *   missing data is replaced by zeroes. @miter is advanced by 4*@count
+ *   bytes or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
+}
+
+#endif /* LINUX_CB710_SG_H */
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1db9bbf444a..1d37f42ac29 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,4 +142,17 @@ struct clk *clk_get_parent(struct clk *clk);
  */
 struct clk *clk_get_sys(const char *dev_id, const char *con_id);
 
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+			struct device *dev);
+
 #endif
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index 3a1dbba4d3a..20a100fe2b4 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -143,3 +143,12 @@ extern void clockevents_notify(unsigned long reason, void *arg);
 #endif
 
 #endif
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+extern ktime_t clockevents_get_next_event(int cpu);
+#else
+static inline ktime_t clockevents_get_next_event(int cpu)
+{
+	return (ktime_t) { .tv64 = KTIME_MAX };
+}
+#endif
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 05ea1dd7d68..a5740fc4d04 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -18,7 +18,6 @@
 
 extern int number_of_cpusets;	/* How many cpusets are defined in system? */
 
-extern int cpuset_init_early(void);
 extern int cpuset_init(void);
 extern void cpuset_init_smp(void);
 extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask);
@@ -27,7 +26,6 @@ extern void cpuset_cpus_allowed_locked(struct task_struct *p,
 extern nodemask_t cpuset_mems_allowed(struct task_struct *p);
 #define cpuset_current_mems_allowed (current->mems_allowed)
 void cpuset_init_current_mems_allowed(void);
-void cpuset_update_task_memory_state(void);
 int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask);
 
 extern int __cpuset_node_allowed_softwall(int node, gfp_t gfp_mask);
@@ -92,9 +90,13 @@ extern void rebuild_sched_domains(void);
 
 extern void cpuset_print_task_mems_allowed(struct task_struct *p);
 
+static inline void set_mems_allowed(nodemask_t nodemask)
+{
+	current->mems_allowed = nodemask;
+}
+
 #else /* !CONFIG_CPUSETS */
 
-static inline int cpuset_init_early(void) { return 0; }
 static inline int cpuset_init(void) { return 0; }
 static inline void cpuset_init_smp(void) {}
 
@@ -116,7 +118,6 @@ static inline nodemask_t cpuset_mems_allowed(struct task_struct *p)
 
 #define cpuset_current_mems_allowed (node_states[N_HIGH_MEMORY])
 static inline void cpuset_init_current_mems_allowed(void) {}
-static inline void cpuset_update_task_memory_state(void) {}
 
 static inline int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask)
 {
@@ -188,6 +189,10 @@ static inline void cpuset_print_task_mems_allowed(struct task_struct *p)
 {
 }
 
+static inline void set_mems_allowed(nodemask_t nodemask)
+{
+}
+
 #endif /* !CONFIG_CPUSETS */
 
 #endif /* _LINUX_CPUSET_H */
diff --git a/include/linux/device.h b/include/linux/device.h
index a4a7b10aaa4..ed4e39f2c42 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -114,6 +114,8 @@ extern int bus_unregister_notifier(struct bus_type *bus,
 #define BUS_NOTIFY_BOUND_DRIVER		0x00000003 /* driver bound to device */
 #define BUS_NOTIFY_UNBIND_DRIVER	0x00000004 /* driver about to be
 						      unbound */
+#define BUS_NOTIFY_UNBOUND_DRIVER	0x00000005 /* driver is unbound
+						      from the device */
 
 extern struct kset *bus_get_kset(struct bus_type *bus);
 extern struct klist *bus_get_device_klist(struct bus_type *bus);
@@ -192,6 +194,7 @@ struct class {
 	struct kobject			*dev_kobj;
 
 	int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
+	char *(*nodename)(struct device *dev);
 
 	void (*class_release)(struct class *class);
 	void (*dev_release)(struct device *dev);
@@ -287,6 +290,7 @@ struct device_type {
 	const char *name;
 	struct attribute_group **groups;
 	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
+	char *(*nodename)(struct device *dev);
 	void (*release)(struct device *dev);
 
 	struct dev_pm_ops *pm;
@@ -486,6 +490,7 @@ extern struct device *device_find_child(struct device *dev, void *data,
 extern int device_rename(struct device *dev, char *new_name);
 extern int device_move(struct device *dev, struct device *new_parent,
 		       enum dpm_order dpm_order);
+extern const char *device_get_nodename(struct device *dev, const char **tmp);
 
 /*
  * Root device objects for grouping under /sys/devices
diff --git a/include/linux/eisa.h b/include/linux/eisa.h
index e61c0be2a45..6925249a5ac 100644
--- a/include/linux/eisa.h
+++ b/include/linux/eisa.h
@@ -78,12 +78,12 @@ static inline void eisa_driver_unregister (struct eisa_driver *edrv) { }
 /* Mimics pci.h... */
 static inline void *eisa_get_drvdata (struct eisa_device *edev)
 {
-        return edev->dev.driver_data;
+        return dev_get_drvdata(&edev->dev);
 }
 
 static inline void eisa_set_drvdata (struct eisa_device *edev, void *data)
 {
-        edev->dev.driver_data = data;
+        dev_set_drvdata(&edev->dev, data);
 }
 
 /* The EISA root device. There's rumours about machines with multiple
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index a1f17abba7d..3d7a6687d24 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -182,6 +182,33 @@ static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2],
 	return compare_ether_addr(addr1, addr2);
 #endif
 }
+
+/**
+ * is_etherdev_addr - Tell if given Ethernet address belongs to the device.
+ * @dev: Pointer to a device structure
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Compare passed address with all addresses of the device. Return true if the
+ * address if one of the device addresses.
+ *
+ * Note that this function calls compare_ether_addr_64bits() so take care of
+ * the right padding.
+ */
+static inline bool is_etherdev_addr(const struct net_device *dev,
+				    const u8 addr[6 + 2])
+{
+	struct netdev_hw_addr *ha;
+	int res = 1;
+
+	rcu_read_lock();
+	for_each_dev_addr(dev, ha) {
+		res = compare_ether_addr_64bits(addr, ha->addr);
+		if (!res)
+			break;
+	}
+	rcu_read_unlock();
+	return !res;
+}
 #endif	/* __KERNEL__ */
 
 /**
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 131b127b70f..9b660bd2e2b 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -26,11 +26,14 @@ struct ethtool_cmd {
 	__u8	phy_address;
 	__u8	transceiver;	/* Which transceiver to use */
 	__u8	autoneg;	/* Enable or disable autonegotiation */
+	__u8	mdio_support;
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
 	__u16	speed_hi;
-	__u16	reserved2;
-	__u32	reserved[3];
+	__u8	eth_tp_mdix;
+	__u8	reserved2;
+	__u32	lp_advertising;	/* Features the link partner advertises */
+	__u32	reserved[2];
 };
 
 static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
@@ -563,6 +566,11 @@ struct ethtool_ops {
 #define SUPPORTED_Pause			(1 << 13)
 #define SUPPORTED_Asym_Pause		(1 << 14)
 #define SUPPORTED_2500baseX_Full	(1 << 15)
+#define SUPPORTED_Backplane		(1 << 16)
+#define SUPPORTED_1000baseKX_Full	(1 << 17)
+#define SUPPORTED_10000baseKX4_Full	(1 << 18)
+#define SUPPORTED_10000baseKR_Full	(1 << 19)
+#define SUPPORTED_10000baseR_FEC	(1 << 20)
 
 /* Indicates what features are advertised by the interface. */
 #define ADVERTISED_10baseT_Half		(1 << 0)
@@ -581,6 +589,11 @@ struct ethtool_ops {
 #define ADVERTISED_Pause		(1 << 13)
 #define ADVERTISED_Asym_Pause		(1 << 14)
 #define ADVERTISED_2500baseX_Full	(1 << 15)
+#define ADVERTISED_Backplane		(1 << 16)
+#define ADVERTISED_1000baseKX_Full	(1 << 17)
+#define ADVERTISED_10000baseKX4_Full	(1 << 18)
+#define ADVERTISED_10000baseKR_Full	(1 << 19)
+#define ADVERTISED_10000baseR_FEC	(1 << 20)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
@@ -605,6 +618,7 @@ struct ethtool_ops {
 #define PORT_MII		0x02
 #define PORT_FIBRE		0x03
 #define PORT_BNC		0x04
+#define PORT_OTHER		0xff
 
 /* Which transceiver to use. */
 #define XCVR_INTERNAL		0x00
@@ -619,6 +633,11 @@ struct ethtool_ops {
 #define AUTONEG_DISABLE		0x00
 #define AUTONEG_ENABLE		0x01
 
+/* Mode MDI or MDI-X */
+#define ETH_TP_MDI_INVALID	0x00
+#define ETH_TP_MDI		0x01
+#define ETH_TP_MDI_X		0x02
+
 /* Wake-On-Lan options. */
 #define WAKE_PHY		(1 << 0)
 #define WAKE_UCAST		(1 << 1)
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 330c4b1bfca..dd68358996b 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -677,6 +677,9 @@ struct fb_ops {
 	/* get capability given var */
 	void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
 			    struct fb_var_screeninfo *var);
+
+	/* teardown any resources to do with this framebuffer */
+	void (*fb_destroy)(struct fb_info *info);
 };
 
 #ifdef CONFIG_FB_TILEBLITTING
@@ -786,6 +789,8 @@ struct fb_tile_ops {
 #define FBINFO_MISC_USEREVENT          0x10000 /* event request
 						  from userspace */
 #define FBINFO_MISC_TILEBLITTING       0x20000 /* use tile blitting */
+#define FBINFO_MISC_FIRMWARE           0x40000 /* a replaceable firmware
+						  inited framebuffer */
 
 /* A driver may set this flag to indicate that it does want a set_par to be
  * called every time when fbcon_switch is executed. The advantage is that with
@@ -854,7 +859,12 @@ struct fb_info {
 	u32 state;			/* Hardware state i.e suspend */
 	void *fbcon_par;                /* fbcon use-only private area */
 	/* From here on everything is device dependent */
-	void *par;	
+	void *par;
+	/* we need the PCI or similiar aperture base/size not
+	   smem_start/size as smem_start may just be an object
+	   allocated inside the aperture so may not actually overlap */
+	resource_size_t aperture_base;
+	resource_size_t aperture_size;
 };
 
 #ifdef MODULE
@@ -893,7 +903,7 @@ struct fb_info {
 #define fb_writeq sbus_writeq
 #define fb_memset sbus_memset_io
 
-#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__)
+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__)
 
 #define fb_readb __raw_readb
 #define fb_readw __raw_readw
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
new file mode 100644
index 00000000000..e584b7215e8
--- /dev/null
+++ b/include/linux/firewire.h
@@ -0,0 +1,358 @@
+#ifndef _LINUX_FIREWIRE_H
+#define _LINUX_FIREWIRE_H
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
+
+#define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args)
+#define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
+
+static inline void fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
+{
+	u32    *dst = _dst;
+	__be32 *src = _src;
+	int i;
+
+	for (i = 0; i < size / 4; i++)
+		dst[i] = be32_to_cpu(src[i]);
+}
+
+static inline void fw_memcpy_to_be32(void *_dst, void *_src, size_t size)
+{
+	fw_memcpy_from_be32(_dst, _src, size);
+}
+#define CSR_REGISTER_BASE		0xfffff0000000ULL
+
+/* register offsets are relative to CSR_REGISTER_BASE */
+#define CSR_STATE_CLEAR			0x0
+#define CSR_STATE_SET			0x4
+#define CSR_NODE_IDS			0x8
+#define CSR_RESET_START			0xc
+#define CSR_SPLIT_TIMEOUT_HI		0x18
+#define CSR_SPLIT_TIMEOUT_LO		0x1c
+#define CSR_CYCLE_TIME			0x200
+#define CSR_BUS_TIME			0x204
+#define CSR_BUSY_TIMEOUT		0x210
+#define CSR_BUS_MANAGER_ID		0x21c
+#define CSR_BANDWIDTH_AVAILABLE		0x220
+#define CSR_CHANNELS_AVAILABLE		0x224
+#define CSR_CHANNELS_AVAILABLE_HI	0x224
+#define CSR_CHANNELS_AVAILABLE_LO	0x228
+#define CSR_BROADCAST_CHANNEL		0x234
+#define CSR_CONFIG_ROM			0x400
+#define CSR_CONFIG_ROM_END		0x800
+#define CSR_FCP_COMMAND			0xB00
+#define CSR_FCP_RESPONSE		0xD00
+#define CSR_FCP_END			0xF00
+#define CSR_TOPOLOGY_MAP		0x1000
+#define CSR_TOPOLOGY_MAP_END		0x1400
+#define CSR_SPEED_MAP			0x2000
+#define CSR_SPEED_MAP_END		0x3000
+
+#define CSR_OFFSET		0x40
+#define CSR_LEAF		0x80
+#define CSR_DIRECTORY		0xc0
+
+#define CSR_DESCRIPTOR		0x01
+#define CSR_VENDOR		0x03
+#define CSR_HARDWARE_VERSION	0x04
+#define CSR_NODE_CAPABILITIES	0x0c
+#define CSR_UNIT		0x11
+#define CSR_SPECIFIER_ID	0x12
+#define CSR_VERSION		0x13
+#define CSR_DEPENDENT_INFO	0x14
+#define CSR_MODEL		0x17
+#define CSR_INSTANCE		0x18
+#define CSR_DIRECTORY_ID	0x20
+
+struct fw_csr_iterator {
+	u32 *p;
+	u32 *end;
+};
+
+void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 *p);
+int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value);
+
+extern struct bus_type fw_bus_type;
+
+struct fw_card_driver;
+struct fw_node;
+
+struct fw_card {
+	const struct fw_card_driver *driver;
+	struct device *device;
+	struct kref kref;
+	struct completion done;
+
+	int node_id;
+	int generation;
+	int current_tlabel;
+	u64 tlabel_mask;
+	struct list_head transaction_list;
+	struct timer_list flush_timer;
+	unsigned long reset_jiffies;
+
+	unsigned long long guid;
+	unsigned max_receive;
+	int link_speed;
+	int config_rom_generation;
+
+	spinlock_t lock; /* Take this lock when handling the lists in
+			  * this struct. */
+	struct fw_node *local_node;
+	struct fw_node *root_node;
+	struct fw_node *irm_node;
+	u8 color; /* must be u8 to match the definition in struct fw_node */
+	int gap_count;
+	bool beta_repeaters_present;
+
+	int index;
+
+	struct list_head link;
+
+	/* Work struct for BM duties. */
+	struct delayed_work work;
+	int bm_retries;
+	int bm_generation;
+
+	bool broadcast_channel_allocated;
+	u32 broadcast_channel;
+	u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
+};
+
+static inline struct fw_card *fw_card_get(struct fw_card *card)
+{
+	kref_get(&card->kref);
+
+	return card;
+}
+
+void fw_card_release(struct kref *kref);
+
+static inline void fw_card_put(struct fw_card *card)
+{
+	kref_put(&card->kref, fw_card_release);
+}
+
+struct fw_attribute_group {
+	struct attribute_group *groups[2];
+	struct attribute_group group;
+	struct attribute *attrs[12];
+};
+
+enum fw_device_state {
+	FW_DEVICE_INITIALIZING,
+	FW_DEVICE_RUNNING,
+	FW_DEVICE_GONE,
+	FW_DEVICE_SHUTDOWN,
+};
+
+/*
+ * Note, fw_device.generation always has to be read before fw_device.node_id.
+ * Use SMP memory barriers to ensure this.  Otherwise requests will be sent
+ * to an outdated node_id if the generation was updated in the meantime due
+ * to a bus reset.
+ *
+ * Likewise, fw-core will take care to update .node_id before .generation so
+ * that whenever fw_device.generation is current WRT the actual bus generation,
+ * fw_device.node_id is guaranteed to be current too.
+ *
+ * The same applies to fw_device.card->node_id vs. fw_device.generation.
+ *
+ * fw_device.config_rom and fw_device.config_rom_length may be accessed during
+ * the lifetime of any fw_unit belonging to the fw_device, before device_del()
+ * was called on the last fw_unit.  Alternatively, they may be accessed while
+ * holding fw_device_rwsem.
+ */
+struct fw_device {
+	atomic_t state;
+	struct fw_node *node;
+	int node_id;
+	int generation;
+	unsigned max_speed;
+	struct fw_card *card;
+	struct device device;
+
+	struct mutex client_list_mutex;
+	struct list_head client_list;
+
+	u32 *config_rom;
+	size_t config_rom_length;
+	int config_rom_retries;
+	unsigned is_local:1;
+	unsigned max_rec:4;
+	unsigned cmc:1;
+	unsigned irmc:1;
+	unsigned bc_implemented:2;
+
+	struct delayed_work work;
+	struct fw_attribute_group attribute_group;
+};
+
+static inline struct fw_device *fw_device(struct device *dev)
+{
+	return container_of(dev, struct fw_device, device);
+}
+
+static inline int fw_device_is_shutdown(struct fw_device *device)
+{
+	return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
+}
+
+static inline struct fw_device *fw_device_get(struct fw_device *device)
+{
+	get_device(&device->device);
+
+	return device;
+}
+
+static inline void fw_device_put(struct fw_device *device)
+{
+	put_device(&device->device);
+}
+
+int fw_device_enable_phys_dma(struct fw_device *device);
+
+/*
+ * fw_unit.directory must not be accessed after device_del(&fw_unit.device).
+ */
+struct fw_unit {
+	struct device device;
+	u32 *directory;
+	struct fw_attribute_group attribute_group;
+};
+
+static inline struct fw_unit *fw_unit(struct device *dev)
+{
+	return container_of(dev, struct fw_unit, device);
+}
+
+static inline struct fw_unit *fw_unit_get(struct fw_unit *unit)
+{
+	get_device(&unit->device);
+
+	return unit;
+}
+
+static inline void fw_unit_put(struct fw_unit *unit)
+{
+	put_device(&unit->device);
+}
+
+static inline struct fw_device *fw_parent_device(struct fw_unit *unit)
+{
+	return fw_device(unit->device.parent);
+}
+
+struct ieee1394_device_id;
+
+struct fw_driver {
+	struct device_driver driver;
+	/* Called when the parent device sits through a bus reset. */
+	void (*update)(struct fw_unit *unit);
+	const struct ieee1394_device_id *id_table;
+};
+
+struct fw_packet;
+struct fw_request;
+
+typedef void (*fw_packet_callback_t)(struct fw_packet *packet,
+				     struct fw_card *card, int status);
+typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
+					  void *data, size_t length,
+					  void *callback_data);
+/*
+ * Important note:  The callback must guarantee that either fw_send_response()
+ * or kfree() is called on the @request.
+ */
+typedef void (*fw_address_callback_t)(struct fw_card *card,
+				      struct fw_request *request,
+				      int tcode, int destination, int source,
+				      int generation, int speed,
+				      unsigned long long offset,
+				      void *data, size_t length,
+				      void *callback_data);
+
+struct fw_packet {
+	int speed;
+	int generation;
+	u32 header[4];
+	size_t header_length;
+	void *payload;
+	size_t payload_length;
+	dma_addr_t payload_bus;
+	u32 timestamp;
+
+	/*
+	 * This callback is called when the packet transmission has
+	 * completed; for successful transmission, the status code is
+	 * the ack received from the destination, otherwise it's a
+	 * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO.
+	 * The callback can be called from tasklet context and thus
+	 * must never block.
+	 */
+	fw_packet_callback_t callback;
+	int ack;
+	struct list_head link;
+	void *driver_data;
+};
+
+struct fw_transaction {
+	int node_id; /* The generation is implied; it is always the current. */
+	int tlabel;
+	int timestamp;
+	struct list_head link;
+
+	struct fw_packet packet;
+
+	/*
+	 * The data passed to the callback is valid only during the
+	 * callback.
+	 */
+	fw_transaction_callback_t callback;
+	void *callback_data;
+};
+
+struct fw_address_handler {
+	u64 offset;
+	size_t length;
+	fw_address_callback_t address_callback;
+	void *callback_data;
+	struct list_head link;
+};
+
+struct fw_address_region {
+	u64 start;
+	u64 end;
+};
+
+extern const struct fw_address_region fw_high_memory_region;
+
+int fw_core_add_address_handler(struct fw_address_handler *handler,
+				const struct fw_address_region *region);
+void fw_core_remove_address_handler(struct fw_address_handler *handler);
+void fw_send_response(struct fw_card *card,
+		      struct fw_request *request, int rcode);
+void fw_send_request(struct fw_card *card, struct fw_transaction *t,
+		     int tcode, int destination_id, int generation, int speed,
+		     unsigned long long offset, void *payload, size_t length,
+		     fw_transaction_callback_t callback, void *callback_data);
+int fw_cancel_transaction(struct fw_card *card,
+			  struct fw_transaction *transaction);
+int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
+		       int generation, int speed, unsigned long long offset,
+		       void *payload, size_t length);
+
+#endif /* _LINUX_FIREWIRE_H */
diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h
index cca686b3912..875451f1373 100644
--- a/include/linux/firmware-map.h
+++ b/include/linux/firmware-map.h
@@ -24,21 +24,17 @@
  */
 #ifdef CONFIG_FIRMWARE_MEMMAP
 
-int firmware_map_add(resource_size_t start, resource_size_t end,
-		     const char *type);
-int firmware_map_add_early(resource_size_t start, resource_size_t end,
-			   const char *type);
+int firmware_map_add(u64 start, u64 end, const char *type);
+int firmware_map_add_early(u64 start, u64 end, const char *type);
 
 #else /* CONFIG_FIRMWARE_MEMMAP */
 
-static inline int firmware_map_add(resource_size_t start, resource_size_t end,
-				   const char *type)
+static inline int firmware_map_add(u64 start, u64 end, const char *type)
 {
 	return 0;
 }
 
-static inline int firmware_map_add_early(resource_size_t start,
-					 resource_size_t end, const char *type)
+static inline int firmware_map_add_early(u64 start, u64 end, const char *type)
 {
 	return 0;
 }
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index c8ecf5b2a20..d3154462843 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -5,7 +5,6 @@
 #include <linux/types.h>
 #include <linux/compiler.h>
 
-#define FIRMWARE_NAME_MAX 30 
 #define FW_ACTION_NOHOTPLUG 0
 #define FW_ACTION_HOTPLUG 1
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ede84fa7da5..74a57938c88 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -879,7 +879,7 @@ struct file_ra_state {
 					   there are only # of pages ahead */
 
 	unsigned int ra_pages;		/* Maximum readahead window */
-	int mmap_miss;			/* Cache miss stat for mmap accesses */
+	unsigned int mmap_miss;		/* Cache miss stat for mmap accesses */
 	loff_t prev_pos;		/* Cache last read() position */
 };
 
@@ -1919,8 +1919,9 @@ extern void __init vfs_caches_init(unsigned long);
 
 extern struct kmem_cache *names_cachep;
 
-#define __getname()	kmem_cache_alloc(names_cachep, GFP_KERNEL)
-#define __putname(name) kmem_cache_free(names_cachep, (void *)(name))
+#define __getname_gfp(gfp)	kmem_cache_alloc(names_cachep, (gfp))
+#define __getname()		__getname_gfp(GFP_KERNEL)
+#define __putname(name)		kmem_cache_free(names_cachep, (void *)(name))
 #ifndef CONFIG_AUDITSYSCALL
 #define putname(name)   __putname(name)
 #else
@@ -2036,9 +2037,6 @@ extern int __invalidate_device(struct block_device *);
 extern int invalidate_partition(struct gendisk *, int);
 #endif
 extern int invalidate_inodes(struct super_block *);
-unsigned long __invalidate_mapping_pages(struct address_space *mapping,
-					pgoff_t start, pgoff_t end,
-					bool be_atomic);
 unsigned long invalidate_mapping_pages(struct address_space *mapping,
 					pgoff_t start, pgoff_t end);
 
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 8300cab30f9..51b793466ff 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -17,6 +17,7 @@
 #define FS_ENET_PD_H
 
 #include <linux/string.h>
+#include <linux/of_mdio.h>
 #include <asm/types.h>
 
 #define FS_ENET_NAME	"fs_enet"
@@ -130,10 +131,7 @@ struct fs_platform_info {
 	
 	u32 device_flags;
 
-	int phy_addr;		/* the phy address (-1 no phy) */
-	char bus_id[16];
-	int phy_irq;		/* the phy irq (if it exists)  */
-
+	struct device_node *phy_node;
 	const struct fs_mii_bus_info *bus_info;
 
 	int rx_ring, tx_ring;	/* number of buffers on rx     */
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 7cbd38d363a..45fc320a53c 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -142,7 +142,7 @@ struct gendisk {
                                          * disks that can't be partitioned. */
 
 	char disk_name[DISK_NAME_LEN];	/* name of major driver */
-
+	char *(*nodename)(struct gendisk *gd);
 	/* Array of pointers to partitions indexed by partno.
 	 * Protected with matching bdev lock but stat and other
 	 * non-critical accesses use RCU.  Always access through
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 3760e7c5de0..cfdb35d71bc 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -5,6 +5,7 @@
 #include <linux/stddef.h>
 #include <linux/linkage.h>
 #include <linux/topology.h>
+#include <linux/mmdebug.h>
 
 struct vm_area_struct;
 
@@ -20,7 +21,8 @@ struct vm_area_struct;
 #define __GFP_DMA	((__force gfp_t)0x01u)
 #define __GFP_HIGHMEM	((__force gfp_t)0x02u)
 #define __GFP_DMA32	((__force gfp_t)0x04u)
-
+#define __GFP_MOVABLE	((__force gfp_t)0x08u)  /* Page is movable */
+#define GFP_ZONEMASK	(__GFP_DMA|__GFP_HIGHMEM|__GFP_DMA32|__GFP_MOVABLE)
 /*
  * Action modifiers - doesn't change the zoning
  *
@@ -50,9 +52,20 @@ struct vm_area_struct;
 #define __GFP_HARDWALL   ((__force gfp_t)0x20000u) /* Enforce hardwall cpuset memory allocs */
 #define __GFP_THISNODE	((__force gfp_t)0x40000u)/* No fallback, no policies */
 #define __GFP_RECLAIMABLE ((__force gfp_t)0x80000u) /* Page is reclaimable */
-#define __GFP_MOVABLE	((__force gfp_t)0x100000u)  /* Page is movable */
 
-#define __GFP_BITS_SHIFT 21	/* Room for 21 __GFP_FOO bits */
+#ifdef CONFIG_KMEMCHECK
+#define __GFP_NOTRACK	((__force gfp_t)0x200000u)  /* Don't track with kmemcheck */
+#else
+#define __GFP_NOTRACK	((__force gfp_t)0)
+#endif
+
+/*
+ * This may seem redundant, but it's a way of annotating false positives vs.
+ * allocations that simply cannot be supported (e.g. page tables).
+ */
+#define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK)
+
+#define __GFP_BITS_SHIFT 22	/* Room for 22 __GFP_FOO bits */
 #define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1))
 
 /* This equals 0, but use constants in case they ever change */
@@ -115,24 +128,105 @@ static inline int allocflags_to_migratetype(gfp_t gfp_flags)
 		((gfp_flags & __GFP_RECLAIMABLE) != 0);
 }
 
-static inline enum zone_type gfp_zone(gfp_t flags)
-{
+#ifdef CONFIG_HIGHMEM
+#define OPT_ZONE_HIGHMEM ZONE_HIGHMEM
+#else
+#define OPT_ZONE_HIGHMEM ZONE_NORMAL
+#endif
+
 #ifdef CONFIG_ZONE_DMA
-	if (flags & __GFP_DMA)
-		return ZONE_DMA;
+#define OPT_ZONE_DMA ZONE_DMA
+#else
+#define OPT_ZONE_DMA ZONE_NORMAL
 #endif
+
 #ifdef CONFIG_ZONE_DMA32
-	if (flags & __GFP_DMA32)
-		return ZONE_DMA32;
+#define OPT_ZONE_DMA32 ZONE_DMA32
+#else
+#define OPT_ZONE_DMA32 ZONE_NORMAL
 #endif
-	if ((flags & (__GFP_HIGHMEM | __GFP_MOVABLE)) ==
-			(__GFP_HIGHMEM | __GFP_MOVABLE))
-		return ZONE_MOVABLE;
-#ifdef CONFIG_HIGHMEM
-	if (flags & __GFP_HIGHMEM)
-		return ZONE_HIGHMEM;
+
+/*
+ * GFP_ZONE_TABLE is a word size bitstring that is used for looking up the
+ * zone to use given the lowest 4 bits of gfp_t. Entries are ZONE_SHIFT long
+ * and there are 16 of them to cover all possible combinations of
+ * __GFP_DMA, __GFP_DMA32, __GFP_MOVABLE and __GFP_HIGHMEM
+ *
+ * The zone fallback order is MOVABLE=>HIGHMEM=>NORMAL=>DMA32=>DMA.
+ * But GFP_MOVABLE is not only a zone specifier but also an allocation
+ * policy. Therefore __GFP_MOVABLE plus another zone selector is valid.
+ * Only 1bit of the lowest 3 bit (DMA,DMA32,HIGHMEM) can be set to "1".
+ *
+ *       bit       result
+ *       =================
+ *       0x0    => NORMAL
+ *       0x1    => DMA or NORMAL
+ *       0x2    => HIGHMEM or NORMAL
+ *       0x3    => BAD (DMA+HIGHMEM)
+ *       0x4    => DMA32 or DMA or NORMAL
+ *       0x5    => BAD (DMA+DMA32)
+ *       0x6    => BAD (HIGHMEM+DMA32)
+ *       0x7    => BAD (HIGHMEM+DMA32+DMA)
+ *       0x8    => NORMAL (MOVABLE+0)
+ *       0x9    => DMA or NORMAL (MOVABLE+DMA)
+ *       0xa    => MOVABLE (Movable is valid only if HIGHMEM is set too)
+ *       0xb    => BAD (MOVABLE+HIGHMEM+DMA)
+ *       0xc    => DMA32 (MOVABLE+HIGHMEM+DMA32)
+ *       0xd    => BAD (MOVABLE+DMA32+DMA)
+ *       0xe    => BAD (MOVABLE+DMA32+HIGHMEM)
+ *       0xf    => BAD (MOVABLE+DMA32+HIGHMEM+DMA)
+ *
+ * ZONES_SHIFT must be <= 2 on 32 bit platforms.
+ */
+
+#if 16 * ZONES_SHIFT > BITS_PER_LONG
+#error ZONES_SHIFT too large to create GFP_ZONE_TABLE integer
+#endif
+
+#define GFP_ZONE_TABLE ( \
+	(ZONE_NORMAL << 0 * ZONES_SHIFT)				\
+	| (OPT_ZONE_DMA << __GFP_DMA * ZONES_SHIFT) 			\
+	| (OPT_ZONE_HIGHMEM << __GFP_HIGHMEM * ZONES_SHIFT)		\
+	| (OPT_ZONE_DMA32 << __GFP_DMA32 * ZONES_SHIFT)			\
+	| (ZONE_NORMAL << __GFP_MOVABLE * ZONES_SHIFT)			\
+	| (OPT_ZONE_DMA << (__GFP_MOVABLE | __GFP_DMA) * ZONES_SHIFT)	\
+	| (ZONE_MOVABLE << (__GFP_MOVABLE | __GFP_HIGHMEM) * ZONES_SHIFT)\
+	| (OPT_ZONE_DMA32 << (__GFP_MOVABLE | __GFP_DMA32) * ZONES_SHIFT)\
+)
+
+/*
+ * GFP_ZONE_BAD is a bitmap for all combination of __GFP_DMA, __GFP_DMA32
+ * __GFP_HIGHMEM and __GFP_MOVABLE that are not permitted. One flag per
+ * entry starting with bit 0. Bit is set if the combination is not
+ * allowed.
+ */
+#define GFP_ZONE_BAD ( \
+	1 << (__GFP_DMA | __GFP_HIGHMEM)				\
+	| 1 << (__GFP_DMA | __GFP_DMA32)				\
+	| 1 << (__GFP_DMA32 | __GFP_HIGHMEM)				\
+	| 1 << (__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM)		\
+	| 1 << (__GFP_MOVABLE | __GFP_HIGHMEM | __GFP_DMA)		\
+	| 1 << (__GFP_MOVABLE | __GFP_DMA32 | __GFP_DMA)		\
+	| 1 << (__GFP_MOVABLE | __GFP_DMA32 | __GFP_HIGHMEM)		\
+	| 1 << (__GFP_MOVABLE | __GFP_DMA32 | __GFP_DMA | __GFP_HIGHMEM)\
+)
+
+static inline enum zone_type gfp_zone(gfp_t flags)
+{
+	enum zone_type z;
+	int bit = flags & GFP_ZONEMASK;
+
+	z = (GFP_ZONE_TABLE >> (bit * ZONES_SHIFT)) &
+					 ((1 << ZONES_SHIFT) - 1);
+
+	if (__builtin_constant_p(bit))
+		BUILD_BUG_ON((GFP_ZONE_BAD >> bit) & 1);
+	else {
+#ifdef CONFIG_DEBUG_VM
+		BUG_ON((GFP_ZONE_BAD >> bit) & 1);
 #endif
-	return ZONE_NORMAL;
+	}
+	return z;
 }
 
 /*
@@ -172,30 +266,19 @@ static inline void arch_alloc_page(struct page *page, int order) { }
 #endif
 
 struct page *
-__alloc_pages_internal(gfp_t gfp_mask, unsigned int order,
+__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
 		       struct zonelist *zonelist, nodemask_t *nodemask);
 
 static inline struct page *
 __alloc_pages(gfp_t gfp_mask, unsigned int order,
 		struct zonelist *zonelist)
 {
-	return __alloc_pages_internal(gfp_mask, order, zonelist, NULL);
+	return __alloc_pages_nodemask(gfp_mask, order, zonelist, NULL);
 }
 
-static inline struct page *
-__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
-		struct zonelist *zonelist, nodemask_t *nodemask)
-{
-	return __alloc_pages_internal(gfp_mask, order, zonelist, nodemask);
-}
-
-
 static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
 						unsigned int order)
 {
-	if (unlikely(order >= MAX_ORDER))
-		return NULL;
-
 	/* Unknown node is current node */
 	if (nid < 0)
 		nid = numa_node_id();
@@ -203,15 +286,20 @@ static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
 	return __alloc_pages(gfp_mask, order, node_zonelist(nid, gfp_mask));
 }
 
+static inline struct page *alloc_pages_exact_node(int nid, gfp_t gfp_mask,
+						unsigned int order)
+{
+	VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES);
+
+	return __alloc_pages(gfp_mask, order, node_zonelist(nid, gfp_mask));
+}
+
 #ifdef CONFIG_NUMA
 extern struct page *alloc_pages_current(gfp_t gfp_mask, unsigned order);
 
 static inline struct page *
 alloc_pages(gfp_t gfp_mask, unsigned int order)
 {
-	if (unlikely(order >= MAX_ORDER))
-		return NULL;
-
 	return alloc_pages_current(gfp_mask, order);
 }
 extern struct page *alloc_page_vma(gfp_t gfp_mask,
@@ -248,4 +336,16 @@ void drain_zone_pages(struct zone *zone, struct per_cpu_pages *pcp);
 void drain_all_pages(void);
 void drain_local_pages(void *dummy);
 
+extern bool oom_killer_disabled;
+
+static inline void oom_killer_disable(void)
+{
+	oom_killer_disabled = true;
+}
+
+static inline void oom_killer_enable(void)
+{
+	oom_killer_disabled = false;
+}
+
 #endif /* __LINUX_GFP_H */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index a72876e4358..53489fd4d70 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -238,6 +238,42 @@ struct hid_item {
 #define HID_GD_RIGHT		0x00010092
 #define HID_GD_LEFT		0x00010093
 
+#define HID_DG_DIGITIZER	0x000d0001
+#define HID_DG_PEN		0x000d0002
+#define HID_DG_LIGHTPEN		0x000d0003
+#define HID_DG_TOUCHSCREEN	0x000d0004
+#define HID_DG_TOUCHPAD		0x000d0005
+#define HID_DG_STYLUS		0x000d0020
+#define HID_DG_PUCK		0x000d0021
+#define HID_DG_FINGER		0x000d0022
+#define HID_DG_TIPPRESSURE	0x000d0030
+#define HID_DG_BARRELPRESSURE	0x000d0031
+#define HID_DG_INRANGE		0x000d0032
+#define HID_DG_TOUCH		0x000d0033
+#define HID_DG_UNTOUCH		0x000d0034
+#define HID_DG_TAP		0x000d0035
+#define HID_DG_TABLETFUNCTIONKEY	0x000d0039
+#define HID_DG_PROGRAMCHANGEKEY	0x000d003a
+#define HID_DG_INVERT		0x000d003c
+#define HID_DG_TIPSWITCH	0x000d0042
+#define HID_DG_TIPSWITCH2	0x000d0043
+#define HID_DG_BARRELSWITCH	0x000d0044
+#define HID_DG_ERASER		0x000d0045
+#define HID_DG_TABLETPICK	0x000d0046
+/*
+ * as of May 20, 2009 the usages below are not yet in the official USB spec
+ * but are being pushed by Microsft as described in their paper "Digitizer
+ * Drivers for Windows Touch and Pen-Based Computers"
+ */
+#define HID_DG_CONFIDENCE	0x000d0047
+#define HID_DG_WIDTH		0x000d0048
+#define HID_DG_HEIGHT		0x000d0049
+#define HID_DG_CONTACTID	0x000d0051
+#define HID_DG_INPUTMODE	0x000d0052
+#define HID_DG_DEVICEINDEX	0x000d0053
+#define HID_DG_CONTACTCOUNT	0x000d0054
+#define HID_DG_CONTACTMAX	0x000d0055
+
 /*
  * HID report types --- Ouch! HID spec says 1 2 3!
  */
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index 1fcb7126a01..211ff449726 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -55,7 +55,9 @@ static inline void *kmap(struct page *page)
 	return page_address(page);
 }
 
-#define kunmap(page) do { (void) (page); } while (0)
+static inline void kunmap(struct page *page)
+{
+}
 
 static inline void *kmap_atomic(struct page *page, enum km_type idx)
 {
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 0d2f7c8a33d..7400900de94 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -30,8 +30,11 @@ struct hrtimer_cpu_base;
  * Mode arguments of xxx_hrtimer functions:
  */
 enum hrtimer_mode {
-	HRTIMER_MODE_ABS,	/* Time value is absolute */
-	HRTIMER_MODE_REL,	/* Time value is relative to now */
+	HRTIMER_MODE_ABS = 0x0,		/* Time value is absolute */
+	HRTIMER_MODE_REL = 0x1,		/* Time value is relative to now */
+	HRTIMER_MODE_PINNED = 0x02,	/* Timer is bound to CPU */
+	HRTIMER_MODE_ABS_PINNED = 0x02,
+	HRTIMER_MODE_REL_PINNED = 0x03,
 };
 
 /*
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 03be7f29ca0..a05a5ef3339 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -11,6 +11,8 @@
 
 struct ctl_table;
 
+int PageHuge(struct page *page);
+
 static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
 {
 	return vma->vm_flags & VM_HUGETLB;
@@ -61,6 +63,11 @@ void hugetlb_change_protection(struct vm_area_struct *vma,
 
 #else /* !CONFIG_HUGETLB_PAGE */
 
+static inline int PageHuge(struct page *page)
+{
+	return 0;
+}
+
 static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
 {
 	return 0;
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 4b501b48ce8..a9173d5434d 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -493,6 +493,7 @@ struct ieee80211s_hdr {
 /* Mesh flags */
 #define MESH_FLAGS_AE_A4 	0x1
 #define MESH_FLAGS_AE_A5_A6	0x2
+#define MESH_FLAGS_AE		0x3
 #define MESH_FLAGS_PS_DEEP	0x4
 
 /**
@@ -540,10 +541,10 @@ struct ieee80211_tim_ie {
 	u8 dtim_period;
 	u8 bitmap_ctrl;
 	/* variable size: 1 - 251 bytes */
-	u8 virtual_map[0];
+	u8 virtual_map[1];
 } __attribute__ ((packed));
 
-#define WLAN_SA_QUERY_TR_ID_LEN 16
+#define WLAN_SA_QUERY_TR_ID_LEN 2
 
 struct ieee80211_mgmt {
 	__le16 frame_control;
@@ -1068,8 +1069,12 @@ enum ieee80211_category {
 	WLAN_CATEGORY_DLS = 2,
 	WLAN_CATEGORY_BACK = 3,
 	WLAN_CATEGORY_PUBLIC = 4,
+	WLAN_CATEGORY_HT = 7,
 	WLAN_CATEGORY_SA_QUERY = 8,
+	WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
 	WLAN_CATEGORY_WMM = 17,
+	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
+	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
 };
 
 /* SPECTRUM_MGMT action code */
@@ -1081,6 +1086,15 @@ enum ieee80211_spectrum_mgmt_actioncode {
 	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
 };
 
+/* Security key length */
+enum ieee80211_key_len {
+	WLAN_KEY_LEN_WEP40 = 5,
+	WLAN_KEY_LEN_WEP104 = 13,
+	WLAN_KEY_LEN_CCMP = 16,
+	WLAN_KEY_LEN_TKIP = 32,
+	WLAN_KEY_LEN_AES_CMAC = 16,
+};
+
 /*
  * IEEE 802.11-2007 7.3.2.9 Country information element
  *
@@ -1261,7 +1275,9 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
 		if (ieee80211_has_protected(hdr->frame_control))
 			return true;
 		category = ((u8 *) hdr) + 24;
-		return *category != WLAN_CATEGORY_PUBLIC;
+		return *category != WLAN_CATEGORY_PUBLIC &&
+			*category != WLAN_CATEGORY_HT &&
+			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
 	}
 
 	return false;
@@ -1383,4 +1399,43 @@ static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
 		return -1;
 }
 
+/**
+ * ieee80211_tu_to_usec - convert time units (TU) to microseconds
+ * @tu: the TUs
+ */
+static inline unsigned long ieee80211_tu_to_usec(unsigned long tu)
+{
+	return 1024 * tu;
+}
+
+/**
+ * ieee80211_check_tim - check if AID bit is set in TIM
+ * @tim: the TIM IE
+ * @tim_len: length of the TIM IE
+ * @aid: the AID to look for
+ */
+static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim,
+				       u8 tim_len, u16 aid)
+{
+	u8 mask;
+	u8 index, indexn1, indexn2;
+
+	if (unlikely(!tim || tim_len < sizeof(*tim)))
+		return false;
+
+	aid &= 0x3fff;
+	index = aid / 8;
+	mask  = 1 << (aid & 7);
+
+	indexn1 = tim->bitmap_ctrl & 0xfe;
+	indexn2 = tim_len + indexn1 - 4;
+
+	if (index < indexn1 || index > indexn2)
+		return false;
+
+	index -= indexn1;
+
+	return !!(tim->virtual_map[index] & mask);
+}
+
 #endif /* LINUX_IEEE80211_H */
diff --git a/include/linux/if.h b/include/linux/if.h
index 1108f3e099e..b9a6229f3be 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -67,6 +67,9 @@
 #define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
 #define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
 #define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/
+#define IFF_XMIT_DST_RELEASE 0x400	/* dev_hard_start_xmit() is allowed to
+					 * release skb->dst
+					 */
 
 #define IF_GET_IFACE	0x0001		/* for querying only */
 #define IF_GET_PROTO	0x0002
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 5ff89809a58..b554300ef8b 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -86,6 +86,8 @@
 #define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
 #define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
 #define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
+#define ARPHRD_IEEE802154	  804
+#define ARPHRD_IEEE802154_PHY	  805
 
 #define ARPHRD_PHONET	820		/* PhoNet media type		*/
 #define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 60e8934d10b..ae3a1871413 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -107,6 +107,7 @@
 #define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
 #define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
 #define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
+#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
 
 /*
  *	This is an Ethernet frame header.
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
index 18db0668065..dea7d6b7cf9 100644
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -46,6 +46,8 @@ struct sockaddr_ll
 #define PACKET_VERSION			10
 #define PACKET_HDRLEN			11
 #define PACKET_RESERVE			12
+#define PACKET_TX_RING			13
+#define PACKET_LOSS			14
 
 struct tpacket_stats
 {
@@ -63,14 +65,22 @@ struct tpacket_auxdata
 	__u16		tp_vlan_tci;
 };
 
+/* Rx ring - header status */
+#define TP_STATUS_KERNEL	0x0
+#define TP_STATUS_USER		0x1
+#define TP_STATUS_COPY		0x2
+#define TP_STATUS_LOSING	0x4
+#define TP_STATUS_CSUMNOTREADY	0x8
+
+/* Tx ring - header status */
+#define TP_STATUS_AVAILABLE	0x0
+#define TP_STATUS_SEND_REQUEST	0x1
+#define TP_STATUS_SENDING	0x2
+#define TP_STATUS_WRONG_FORMAT	0x4
+
 struct tpacket_hdr
 {
 	unsigned long	tp_status;
-#define TP_STATUS_KERNEL	0
-#define TP_STATUS_USER		1
-#define TP_STATUS_COPY		2
-#define TP_STATUS_LOSING	4
-#define TP_STATUS_CSUMNOTREADY	8
 	unsigned int	tp_len;
 	unsigned int	tp_snaplen;
 	unsigned short	tp_mac;
@@ -135,5 +145,6 @@ struct packet_mreq
 #define PACKET_MR_MULTICAST	0
 #define PACKET_MR_PROMISC	1
 #define PACKET_MR_ALLMULTI	2
+#define PACKET_MR_UNICAST	3
 
 #endif
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 049d6c9428d..915ba5789f0 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -55,6 +55,7 @@
 #define IFF_NO_PI	0x1000
 #define IFF_ONE_QUEUE	0x2000
 #define IFF_VNET_HDR	0x4000
+#define IFF_TUN_EXCL	0x8000
 
 /* Features for GSO (TUNSETOFFLOAD). */
 #define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 5a9aae4adb4..5eb9b0f857e 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -44,7 +44,7 @@ struct ip_tunnel_prl {
 	__u16			flags;
 	__u16			__reserved;
 	__u32			datalen;
-	__u32			__reserved2;
+	__u32			rs_delay;
 	/* data follows */
 };
 
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index e1ff5b14310..7ff9af1d0f0 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -118,8 +118,7 @@ extern int vlan_hwaccel_do_receive(struct sk_buff *skb);
 extern int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
 			    unsigned int vlan_tci, struct sk_buff *skb);
 extern int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
-			  unsigned int vlan_tci,
-			  struct napi_gro_fraginfo *info);
+			  unsigned int vlan_tci);
 
 #else
 static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev)
@@ -154,8 +153,7 @@ static inline int vlan_gro_receive(struct napi_struct *napi,
 }
 
 static inline int vlan_gro_frags(struct napi_struct *napi,
-				 struct vlan_group *grp, unsigned int vlan_tci,
-				 struct napi_gro_fraginfo *info)
+				 struct vlan_group *grp, unsigned int vlan_tci)
 {
 	return NET_RX_DROP;
 }
diff --git a/include/linux/in.h b/include/linux/in.h
index d60122a3a08..cf196da04ec 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -107,6 +107,7 @@ struct in_addr {
 #define MCAST_JOIN_SOURCE_GROUP		46
 #define MCAST_LEAVE_SOURCE_GROUP	47
 #define MCAST_MSFILTER			48
+#define IP_MULTICAST_ALL		49
 
 #define MCAST_EXCLUDE	0
 #define MCAST_INCLUDE	1
diff --git a/include/linux/init.h b/include/linux/init.h
index 0e06c176f18..8c2c9989626 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -2,8 +2,6 @@
 #define _LINUX_INIT_H
 
 #include <linux/compiler.h>
-#include <linux/section-names.h>
-#include <linux/stringify.h>
 
 /* These macros are used to mark some functions or 
  * initialized data (doesn't apply to uninitialized data)
@@ -31,7 +29,7 @@
  * sign followed by value, e.g.:
  *
  * static int init_variable __initdata = 0;
- * static char linux_logo[] __initdata = { 0x32, 0x36, ... };
+ * static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
  *
  * Don't forget to initialize data not at file scope, i.e. within a function,
  * as gcc otherwise puts the data into the bss section and not into the init
@@ -101,7 +99,7 @@
 #define __memexitconst   __section(.memexit.rodata)
 
 /* For assembly routines */
-#define __HEAD		.section	__stringify(HEAD_TEXT_SECTION),"ax"
+#define __HEAD		.section	".head.text","ax"
 #define __INIT		.section	".init.text","ax"
 #define __FINIT		.previous
 
@@ -225,7 +223,8 @@ struct obs_kernel_param {
  * obs_kernel_param "array" too far apart in .init.setup.
  */
 #define __setup_param(str, unique_id, fn, early)			\
-	static char __setup_str_##unique_id[] __initdata __aligned(1) = str; \
+	static const char __setup_str_##unique_id[] __initconst	\
+		__aligned(1) = str; \
 	static struct obs_kernel_param __setup_##unique_id	\
 		__used __section(.init.setup)			\
 		__attribute__((aligned((sizeof(long)))))	\
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 28b1f30601b..5368fbdc780 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -15,18 +15,6 @@
 extern struct files_struct init_files;
 extern struct fs_struct init_fs;
 
-#define INIT_MM(name) \
-{			 					\
-	.mm_rb		= RB_ROOT,				\
-	.pgd		= swapper_pg_dir, 			\
-	.mm_users	= ATOMIC_INIT(2), 			\
-	.mm_count	= ATOMIC_INIT(1), 			\
-	.mmap_sem	= __RWSEM_INITIALIZER(name.mmap_sem),	\
-	.page_table_lock =  __SPIN_LOCK_UNLOCKED(name.page_table_lock),	\
-	.mmlist		= LIST_HEAD_INIT(name.mmlist),		\
-	.cpu_vm_mask	= CPU_MASK_ALL,				\
-}
-
 #define INIT_SIGNALS(sig) {						\
 	.count		= ATOMIC_INIT(1), 				\
 	.wait_chldexit	= __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index c41e812e9d5..2721f07e935 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -472,6 +472,20 @@ static inline void tasklet_hi_schedule(struct tasklet_struct *t)
 		__tasklet_hi_schedule(t);
 }
 
+extern void __tasklet_hi_schedule_first(struct tasklet_struct *t);
+
+/*
+ * This version avoids touching any other tasklets. Needed for kmemcheck
+ * in order not to take any page faults while enqueueing this tasklet;
+ * consider VERY carefully whether you really need this or
+ * tasklet_hi_schedule()...
+ */
+static inline void tasklet_hi_schedule_first(struct tasklet_struct *t)
+{
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+		__tasklet_hi_schedule_first(t);
+}
+
 
 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
 {
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 476d9464ac8..c662efa6828 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -169,6 +169,12 @@ struct ipv6_devconf {
 	__s32		accept_dad;
 	void		*sysctl;
 };
+
+struct ipv6_params {
+	__s32 disable_ipv6;
+	__s32 autoconf;
+};
+extern struct ipv6_params ipv6_defaults;
 #endif
 
 /* index values for the variables in ipv6_devconf */
diff --git a/include/linux/isdn/capilli.h b/include/linux/isdn/capilli.h
index 35e9b0fd014..7acb87a4487 100644
--- a/include/linux/isdn/capilli.h
+++ b/include/linux/isdn/capilli.h
@@ -79,7 +79,7 @@ int attach_capi_ctr(struct capi_ctr *);
 int detach_capi_ctr(struct capi_ctr *);
 
 void capi_ctr_ready(struct capi_ctr * card);
-void capi_ctr_reseted(struct capi_ctr * card);
+void capi_ctr_down(struct capi_ctr * card);
 void capi_ctr_suspend_output(struct capi_ctr * card);
 void capi_ctr_resume_output(struct capi_ctr * card);
 void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 883cd44ff76..c5a71c38a95 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -97,12 +97,14 @@ extern const char linux_proc_banner[];
 #define	KERN_INFO	"<6>"	/* informational			*/
 #define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
 
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT	"<d>"
 /*
  * Annotation for a "continued" line of log printout (only done after a
  * line that had no enclosing \n). Only to be used by core/arch code
  * during early bootup (a continued line is not SMP-safe otherwise).
  */
-#define	KERN_CONT	""
+#define	KERN_CONT	"<c>"
 
 extern int console_printk[];
 
@@ -406,7 +408,7 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
  *
  * Use tracing_on/tracing_off when you want to quickly turn on or off
  * tracing. It simply enables or disables the recording of the trace events.
- * This also corresponds to the user space debugfs/tracing/tracing_on
+ * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
  * file, which gives a means for the kernel and userspace to interact.
  * Place a tracing_off() in the kernel where you want tracing to end.
  * From user space, examine the trace, and then echo 1 > tracing_on
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index a3c984d780f..33a63f62d57 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -56,6 +56,7 @@ extern int unregister_keyboard_notifier(struct notifier_block *nb);
 #define KT_ASCII	9
 #define KT_LOCK		10
 #define KT_SLOCK	12
+#define KT_DEAD2	13
 #define KT_BRL		14
 
 #define K(t,v)		(((t)<<8)|(v))
diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h
new file mode 100644
index 00000000000..47b39b7c7e8
--- /dev/null
+++ b/include/linux/kmemcheck.h
@@ -0,0 +1,153 @@
+#ifndef LINUX_KMEMCHECK_H
+#define LINUX_KMEMCHECK_H
+
+#include <linux/mm_types.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_KMEMCHECK
+extern int kmemcheck_enabled;
+
+/* The slab-related functions. */
+void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node);
+void kmemcheck_free_shadow(struct page *page, int order);
+void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
+			  size_t size);
+void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size);
+
+void kmemcheck_pagealloc_alloc(struct page *p, unsigned int order,
+			       gfp_t gfpflags);
+
+void kmemcheck_show_pages(struct page *p, unsigned int n);
+void kmemcheck_hide_pages(struct page *p, unsigned int n);
+
+bool kmemcheck_page_is_tracked(struct page *p);
+
+void kmemcheck_mark_unallocated(void *address, unsigned int n);
+void kmemcheck_mark_uninitialized(void *address, unsigned int n);
+void kmemcheck_mark_initialized(void *address, unsigned int n);
+void kmemcheck_mark_freed(void *address, unsigned int n);
+
+void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n);
+void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n);
+void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n);
+
+int kmemcheck_show_addr(unsigned long address);
+int kmemcheck_hide_addr(unsigned long address);
+
+#else
+#define kmemcheck_enabled 0
+
+static inline void
+kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node)
+{
+}
+
+static inline void
+kmemcheck_free_shadow(struct page *page, int order)
+{
+}
+
+static inline void
+kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
+		     size_t size)
+{
+}
+
+static inline void kmemcheck_slab_free(struct kmem_cache *s, void *object,
+				       size_t size)
+{
+}
+
+static inline void kmemcheck_pagealloc_alloc(struct page *p,
+	unsigned int order, gfp_t gfpflags)
+{
+}
+
+static inline bool kmemcheck_page_is_tracked(struct page *p)
+{
+	return false;
+}
+
+static inline void kmemcheck_mark_unallocated(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_uninitialized(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_initialized(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_freed(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_unallocated_pages(struct page *p,
+						    unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_uninitialized_pages(struct page *p,
+						      unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_initialized_pages(struct page *p,
+						    unsigned int n)
+{
+}
+
+#endif /* CONFIG_KMEMCHECK */
+
+/*
+ * Bitfield annotations
+ *
+ * How to use: If you have a struct using bitfields, for example
+ *
+ *     struct a {
+ *             int x:8, y:8;
+ *     };
+ *
+ * then this should be rewritten as
+ *
+ *     struct a {
+ *             kmemcheck_bitfield_begin(flags);
+ *             int x:8, y:8;
+ *             kmemcheck_bitfield_end(flags);
+ *     };
+ *
+ * Now the "flags_begin" and "flags_end" members may be used to refer to the
+ * beginning and end, respectively, of the bitfield (and things like
+ * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
+ * fields should be annotated:
+ *
+ *     struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
+ *     kmemcheck_annotate_bitfield(a, flags);
+ *
+ * Note: We provide the same definitions for both kmemcheck and non-
+ * kmemcheck kernels. This makes it harder to introduce accidental errors. It
+ * is also allowed to pass NULL pointers to kmemcheck_annotate_bitfield().
+ */
+#define kmemcheck_bitfield_begin(name)	\
+	int name##_begin[0];
+
+#define kmemcheck_bitfield_end(name)	\
+	int name##_end[0];
+
+#define kmemcheck_annotate_bitfield(ptr, name)				\
+	do if (ptr) {							\
+		int _n = (long) &((ptr)->name##_end)			\
+			- (long) &((ptr)->name##_begin);		\
+		BUILD_BUG_ON(_n < 0);					\
+									\
+		kmemcheck_mark_initialized(&((ptr)->name##_begin), _n);	\
+	} while (0)
+
+#define kmemcheck_annotate_variable(var)				\
+	do {								\
+		kmemcheck_mark_initialized(&(var), sizeof(var));	\
+	} while (0)							\
+
+#endif /* LINUX_KMEMCHECK_H */
diff --git a/include/linux/linux_logo.h b/include/linux/linux_logo.h
index 08a92969c76..ca5bd91d12e 100644
--- a/include/linux/linux_logo.h
+++ b/include/linux/linux_logo.h
@@ -32,6 +32,22 @@ struct linux_logo {
 	const unsigned char *data;
 };
 
+extern const struct linux_logo logo_linux_mono;
+extern const struct linux_logo logo_linux_vga16;
+extern const struct linux_logo logo_linux_clut224;
+extern const struct linux_logo logo_blackfin_vga16;
+extern const struct linux_logo logo_blackfin_clut224;
+extern const struct linux_logo logo_dec_clut224;
+extern const struct linux_logo logo_mac_clut224;
+extern const struct linux_logo logo_parisc_clut224;
+extern const struct linux_logo logo_sgi_clut224;
+extern const struct linux_logo logo_sun_clut224;
+extern const struct linux_logo logo_superh_mono;
+extern const struct linux_logo logo_superh_vga16;
+extern const struct linux_logo logo_superh_clut224;
+extern const struct linux_logo logo_m32r_clut224;
+extern const struct linux_logo logo_spe_clut224;
+
 extern const struct linux_logo *fb_find_logo(int depth);
 #ifdef CONFIG_FB_LOGO_EXTRA
 extern void fb_append_extra_logo(const struct linux_logo *logo,
diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h
new file mode 100644
index 00000000000..ad651f4e45a
--- /dev/null
+++ b/include/linux/lis3lv02d.h
@@ -0,0 +1,39 @@
+#ifndef __LIS3LV02D_H_
+#define __LIS3LV02D_H_
+
+struct lis3lv02d_platform_data {
+	/* please note: the 'click' feature is only supported for
+	 * LIS[32]02DL variants of the chip and will be ignored for
+	 * others */
+#define LIS3_CLICK_SINGLE_X	(1 << 0)
+#define LIS3_CLICK_DOUBLE_X	(1 << 1)
+#define LIS3_CLICK_SINGLE_Y	(1 << 2)
+#define LIS3_CLICK_DOUBLE_Y	(1 << 3)
+#define LIS3_CLICK_SINGLE_Z	(1 << 4)
+#define LIS3_CLICK_DOUBLE_Z	(1 << 5)
+	unsigned char click_flags;
+	unsigned char click_thresh_x;
+	unsigned char click_thresh_y;
+	unsigned char click_thresh_z;
+	unsigned char click_time_limit;
+	unsigned char click_latency;
+	unsigned char click_window;
+
+#define LIS3_IRQ1_DISABLE	(0 << 0)
+#define LIS3_IRQ1_FF_WU_1	(1 << 0)
+#define LIS3_IRQ1_FF_WU_2	(2 << 0)
+#define LIS3_IRQ1_FF_WU_12	(3 << 0)
+#define LIS3_IRQ1_DATA_READY	(4 << 0)
+#define LIS3_IRQ1_CLICK		(7 << 0)
+#define LIS3_IRQ2_DISABLE	(0 << 3)
+#define LIS3_IRQ2_FF_WU_1	(1 << 3)
+#define LIS3_IRQ2_FF_WU_2	(2 << 3)
+#define LIS3_IRQ2_FF_WU_12	(3 << 3)
+#define LIS3_IRQ2_DATA_READY	(4 << 3)
+#define LIS3_IRQ2_CLICK		(7 << 3)
+#define LIS3_IRQ_OPEN_DRAIN	(1 << 6)
+#define LIS3_IRQ_ACTIVE_HIGH	(1 << 7)
+	unsigned char irq_cfg;
+};
+
+#endif /* __LIS3LV02D_H_ */
diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h
index 93150ecf3ea..5d10ae364b5 100644
--- a/include/linux/list_nulls.h
+++ b/include/linux/list_nulls.h
@@ -56,6 +56,18 @@ static inline int hlist_nulls_empty(const struct hlist_nulls_head *h)
 	return is_a_nulls(h->first);
 }
 
+static inline void hlist_nulls_add_head(struct hlist_nulls_node *n,
+					struct hlist_nulls_head *h)
+{
+	struct hlist_nulls_node *first = h->first;
+
+	n->next = first;
+	n->pprev = &h->first;
+	h->first = n;
+	if (!is_a_nulls(first))
+		first->pprev = &n->next;
+}
+
 static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
 {
 	struct hlist_nulls_node *next = n->next;
@@ -65,6 +77,12 @@ static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
 		next->pprev = pprev;
 }
 
+static inline void hlist_nulls_del(struct hlist_nulls_node *n)
+{
+	__hlist_nulls_del(n);
+	n->pprev = LIST_POISON2;
+}
+
 /**
  * hlist_nulls_for_each_entry	- iterate over list of given type
  * @tpos:	the type * to use as a loop cursor.
diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h
index 6b71d2dce50..41d1eeb9b3b 100644
--- a/include/linux/mISDNdsp.h
+++ b/include/linux/mISDNdsp.h
@@ -12,7 +12,8 @@ struct mISDN_dsp_element {
 	void	*(*new)(const char *arg);
 	void	(*free)(void *p);
 	void	(*process_tx)(void *p, unsigned char *data, int len);
-	void	(*process_rx)(void *p, unsigned char *data, int len);
+	void	(*process_rx)(void *p, unsigned char *data, int len,
+			unsigned int txlen);
 	int	num_args;
 	struct mISDN_dsp_element_arg
 		*args;
@@ -24,6 +25,7 @@ extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem);
 struct dsp_features {
 	int	hfc_id; /* unique id to identify the chip (or -1) */
 	int	hfc_dtmf; /* set if HFCmulti card supports dtmf */
+	int	hfc_conf; /* set if HFCmulti card supports conferences */
 	int	hfc_loops; /* set if card supports tone loops */
 	int	hfc_echocanhw; /* set if card supports echocancelation*/
 	int	pcm_id; /* unique id to identify the pcm bus (or -1) */
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
index 97ffdc1d344..7f9831da847 100644
--- a/include/linux/mISDNhw.h
+++ b/include/linux/mISDNhw.h
@@ -89,11 +89,6 @@ struct dchannel {
 	void			(*phfunc) (struct dchannel *);
 	u_int			state;
 	void			*l1;
-	/* HW access */
-	u_char			(*read_reg) (void *, u_char);
-	void			(*write_reg) (void *, u_char, u_char);
-	void			(*read_fifo) (void *, u_char *, int);
-	void			(*write_fifo) (void *, u_char *, int);
 	void			*hw;
 	int			slot;	/* multiport card channel slot */
 	struct timer_list	timer;
@@ -151,11 +146,6 @@ struct bchannel {
 	u_long			Flags;
 	struct work_struct	workq;
 	u_int			state;
-	/* HW access */
-	u_char			(*read_reg) (void *, u_char);
-	void			(*write_reg) (void *, u_char, u_char);
-	void			(*read_fifo) (void *, u_char *, int);
-	void			(*write_fifo) (void *, u_char *, int);
 	void			*hw;
 	int			slot;	/* multiport card channel slot */
 	struct timer_list	timer;
@@ -185,7 +175,7 @@ extern int	dchannel_senddata(struct dchannel *, struct sk_buff *);
 extern int	bchannel_senddata(struct bchannel *, struct sk_buff *);
 extern void	recv_Dchannel(struct dchannel *);
 extern void	recv_Echannel(struct dchannel *, struct dchannel *);
-extern void	recv_Bchannel(struct bchannel *);
+extern void	recv_Bchannel(struct bchannel *, unsigned int id);
 extern void	recv_Dchannel_skb(struct dchannel *, struct sk_buff *);
 extern void	recv_Bchannel_skb(struct bchannel *, struct sk_buff *);
 extern void	confirm_Bsend(struct bchannel *bch);
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
index 5da3d95b27f..45100b39a7c 100644
--- a/include/linux/mISDNif.h
+++ b/include/linux/mISDNif.h
@@ -229,6 +229,7 @@
 #define OPTION_L2_PTP		2
 #define OPTION_L2_FIXEDTEI	3
 #define OPTION_L2_CLEANUP	4
+#define OPTION_L1_HOLD		5
 
 /* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */
 #define MISDN_MAX_IDLEN		20
@@ -291,19 +292,19 @@ struct mISDN_devrename {
 
 /* MPH_INFORMATION_REQ payload */
 struct ph_info_ch {
-        __u32 protocol;
-        __u64 Flags;
+	__u32 protocol;
+	__u64 Flags;
 };
 
 struct ph_info_dch {
-        struct ph_info_ch ch;
-        __u16 state;
-        __u16 num_bch;
+	struct ph_info_ch ch;
+	__u16 state;
+	__u16 num_bch;
 };
 
 struct ph_info {
-        struct ph_info_dch dch;
-        struct ph_info_ch  bch[];
+	struct ph_info_dch dch;
+	struct ph_info_ch  bch[];
 };
 
 /* timer device ioctl */
@@ -317,6 +318,7 @@ struct ph_info {
 #define IMCTRLREQ	_IOR('I', 69, int)
 #define IMCLEAR_L2	_IOR('I', 70, int)
 #define IMSETDEVNAME	_IOR('I', 71, struct mISDN_devrename)
+#define IMHOLD_L1	_IOR('I', 72, int)
 
 static inline int
 test_channelmap(u_int nr, u_char *map)
@@ -362,7 +364,8 @@ clear_channelmap(u_int nr, u_char *map)
 #define MISDN_CTRL_HFC_RECEIVE_ON	0x4006
 #define MISDN_CTRL_HFC_ECHOCAN_ON 	0x4007
 #define MISDN_CTRL_HFC_ECHOCAN_OFF 	0x4008
-
+#define MISDN_CTRL_HFC_WD_INIT		0x4009
+#define MISDN_CTRL_HFC_WD_RESET		0x400A
 
 /* socket options */
 #define MISDN_TIME_STAMP		0x0001
diff --git a/include/linux/major.h b/include/linux/major.h
index 058ec15dd06..6a8ca98c9a9 100644
--- a/include/linux/major.h
+++ b/include/linux/major.h
@@ -145,6 +145,7 @@
 #define UNIX98_PTY_MAJOR_COUNT	8
 #define UNIX98_PTY_SLAVE_MAJOR	(UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT)
 
+#define DRBD_MAJOR		147
 #define RTF_MAJOR		150
 #define RAW_MAJOR		162
 
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
new file mode 100644
index 00000000000..cfdf1df2875
--- /dev/null
+++ b/include/linux/mdio.h
@@ -0,0 +1,356 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef __LINUX_MDIO_H__
+#define __LINUX_MDIO_H__
+
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
+					 * Physical Medium Dependent */
+#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
+#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
+#define MDIO_MMD_TC		6	/* Transmission Convergence */
+#define MDIO_MMD_AN		7	/* Auto-Negotiation */
+#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
+#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
+#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1		MII_BMCR
+#define MDIO_STAT1		MII_BMSR
+#define MDIO_DEVID1		MII_PHYSID1
+#define MDIO_DEVID2		MII_PHYSID2
+#define MDIO_SPEED		4	/* Speed ability */
+#define MDIO_DEVS1		5	/* Devices in package */
+#define MDIO_DEVS2		6
+#define MDIO_CTRL2		7	/* 10G control 2 */
+#define MDIO_STAT2		8	/* 10G status 2 */
+#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1		14	/* Package identifier */
+#define MDIO_PKGID2		15
+#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
+#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
+					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
+#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
+#define MDIO_CTRL1_RESET		BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
+#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
+#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
+#define MDIO_STAT1_FAULT		0x0080	/* Fault */
+#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
+#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G			0x0001	/* 10G capable */
+#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
+#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
+#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
+#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
+#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
+#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
+#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
+#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
+#define MDIO_PMA_10GBT_SNR_MAX		127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
+#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45			0x8000
+#define MDIO_PHY_ID_PRTAD		0x03e0
+#define MDIO_PHY_ID_DEVAD		0x001f
+#define MDIO_PHY_ID_C45_MASK						\
+	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+static inline bool mdio_phy_id_is_c45(int phy_id)
+{
+	return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
+}
+
+static inline __u16 mdio_phy_id_prtad(int phy_id)
+{
+	return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
+}
+
+static inline __u16 mdio_phy_id_devad(int phy_id)
+{
+	return phy_id & MDIO_PHY_ID_DEVAD;
+}
+
+#define MDIO_SUPPORTS_C22		1
+#define MDIO_SUPPORTS_C45		2
+
+#ifdef __KERNEL__ 
+
+/**
+ * struct mdio_if_info - Ethernet controller MDIO interface
+ * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
+ * @mmds: Mask of MMDs expected to be present in the PHY.  This must be
+ *	non-zero unless @prtad = %MDIO_PRTAD_NONE.
+ * @mode_support: MDIO modes supported.  If %MDIO_SUPPORTS_C22 is set then
+ *	MII register access will be passed through with @devad =
+ *	%MDIO_DEVAD_NONE.  If %MDIO_EMULATE_C22 is set then access to
+ *	commonly used clause 22 registers will be translated into
+ *	clause 45 registers.
+ * @dev: Net device structure
+ * @mdio_read: Register read function; returns value or negative error code
+ * @mdio_write: Register write function; returns 0 or negative error code
+ */
+struct mdio_if_info {
+	int prtad;
+	u32 __bitwise mmds;
+	unsigned mode_support;
+
+	struct net_device *dev;
+	int (*mdio_read)(struct net_device *dev, int prtad, int devad,
+			 u16 addr);
+	int (*mdio_write)(struct net_device *dev, int prtad, int devad,
+			  u16 addr, u16 val);
+};
+
+#define MDIO_PRTAD_NONE			(-1)
+#define MDIO_DEVAD_NONE			(-1)
+#define MDIO_EMULATE_C22		4
+
+struct ethtool_cmd;
+struct ethtool_pauseparam;
+extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
+extern int mdio_set_flag(const struct mdio_if_info *mdio,
+			 int prtad, int devad, u16 addr, int mask,
+			 bool sense);
+extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
+extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
+extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
+				      struct ethtool_cmd *ecmd,
+				      u32 npage_adv, u32 npage_lpa);
+extern void
+mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
+			      const struct ethtool_pauseparam *ecmd);
+
+/**
+ * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
+ * @mdio: MDIO interface
+ * @ecmd: Ethtool request structure
+ *
+ * Since the CSRs for auto-negotiation using next pages are not fully
+ * standardised, this function does not attempt to decode them.  Use
+ * mdio45_ethtool_gset_npage() to specify advertisement bits from next
+ * pages.
+ */
+static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
+				       struct ethtool_cmd *ecmd)
+{
+	mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
+}
+
+extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
+			  struct mii_ioctl_data *mii_data, int cmd);
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 25b9ca93d23..45add35dda1 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -94,6 +94,7 @@ extern void mem_cgroup_note_reclaim_priority(struct mem_cgroup *mem,
 extern void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem,
 							int priority);
 int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg);
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg);
 unsigned long mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg,
 				       struct zone *zone,
 				       enum lru_list lru);
@@ -239,6 +240,12 @@ mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
 	return 1;
 }
 
+static inline int
+mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
+{
+	return 1;
+}
+
 static inline unsigned long
 mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg, struct zone *zone,
 			 enum lru_list lru)
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 516d955ab8a..c377118884e 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -19,6 +19,13 @@
 	} while (0)
 
 /*
+ * data for the MMC controller
+ */
+struct tmio_mmc_data {
+	unsigned int		hclk;
+};
+
+/*
  * data for the NAND controller
  */
 struct tmio_nand_data {
diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h
new file mode 100644
index 00000000000..e11f4d9f1c2
--- /dev/null
+++ b/include/linux/mg_disk.h
@@ -0,0 +1,45 @@
+/*
+ *  include/linux/mg_disk.c
+ *
+ *  Private data for mflash platform driver
+ *
+ * (c) 2008 mGine Co.,LTD
+ * (c) 2008 unsik Kim <donari75@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __MG_DISK_H__
+#define __MG_DISK_H__
+
+/* name for platform device */
+#define MG_DEV_NAME "mg_disk"
+
+/* names of GPIO resource */
+#define MG_RST_PIN	"mg_rst"
+/* except MG_BOOT_DEV, reset-out pin should be assigned */
+#define MG_RSTOUT_PIN	"mg_rstout"
+
+/* device attribution */
+/* use mflash as boot device */
+#define MG_BOOT_DEV		(1 << 0)
+/* use mflash as storage device */
+#define MG_STORAGE_DEV		(1 << 1)
+/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
+#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
+
+/* private driver data */
+struct mg_drv_data {
+	/* disk resource */
+	u32 use_polling;
+
+	/* device attribution */
+	u32 dev_attr;
+
+	/* internally used */
+	void *host;
+};
+
+#endif
diff --git a/include/linux/mii.h b/include/linux/mii.h
index ad748588faf..359fba88027 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -240,6 +240,22 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock,
 }
 
 /**
+ * mii_advertise_flowctrl - get flow control advertisement flags
+ * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
+ */
+static inline u16 mii_advertise_flowctrl(int cap)
+{
+	u16 adv = 0;
+
+	if (cap & FLOW_CTRL_RX)
+		adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+	if (cap & FLOW_CTRL_TX)
+		adv ^= ADVERTISE_PAUSE_ASYM;
+
+	return adv;
+}
+
+/**
  * mii_resolve_flowctrl_fdx
  * @lcladv: value of MII ADVERTISE register
  * @rmtadv: value of MII LPA register
@@ -250,18 +266,12 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
 {
 	u8 cap = 0;
 
-	if (lcladv & ADVERTISE_PAUSE_CAP) {
-		if (lcladv & ADVERTISE_PAUSE_ASYM) {
-			if (rmtadv & LPA_PAUSE_CAP)
-				cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
-			else if (rmtadv & LPA_PAUSE_ASYM)
-				cap = FLOW_CTRL_RX;
-		} else {
-			if (rmtadv & LPA_PAUSE_CAP)
-				cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
-		}
-	} else if (lcladv & ADVERTISE_PAUSE_ASYM) {
-		if ((rmtadv & LPA_PAUSE_CAP) && (rmtadv & LPA_PAUSE_ASYM))
+	if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
+		cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
+	} else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
+		if (lcladv & ADVERTISE_PAUSE_CAP)
+			cap = FLOW_CTRL_RX;
+		else if (rmtadv & ADVERTISE_PAUSE_CAP)
 			cap = FLOW_CTRL_TX;
 	}
 
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index beb6ec99cfe..05211774462 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -41,6 +41,7 @@ struct miscdevice  {
 	struct list_head list;
 	struct device *parent;
 	struct device *this_device;
+	const char *devnode;
 };
 
 extern int misc_register(struct miscdevice * misc);
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 3aff8a6a389..ce7cc6c7bcb 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -210,6 +210,7 @@ struct mlx4_caps {
 	int			num_comp_vectors;
 	int			num_mpts;
 	int			num_mtt_segs;
+	int			mtts_per_seg;
 	int			fmr_reserved_mtts;
 	int			reserved_mtts;
 	int			reserved_mrws;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index bf8f11982da..9f29d86e5dc 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -165,6 +165,7 @@ enum {
 	MLX4_WQE_CTRL_IP_CSUM		= 1 << 4,
 	MLX4_WQE_CTRL_TCP_UDP_CSUM	= 1 << 5,
 	MLX4_WQE_CTRL_INS_VLAN		= 1 << 6,
+	MLX4_WQE_CTRL_STRONG_ORDER	= 1 << 7,
 };
 
 struct mlx4_wqe_ctrl_seg {
diff --git a/include/linux/mm.h b/include/linux/mm.h
index ad613ed66ab..d88d6fc530a 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -7,7 +7,6 @@
 
 #include <linux/gfp.h>
 #include <linux/list.h>
-#include <linux/mmdebug.h>
 #include <linux/mmzone.h>
 #include <linux/rbtree.h>
 #include <linux/prio_tree.h>
@@ -725,7 +724,7 @@ static inline int shmem_lock(struct file *file, int lock,
 	return 0;
 }
 #endif
-struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags);
+struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
 
 int shmem_zero_setup(struct vm_area_struct *);
 
@@ -793,6 +792,8 @@ int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
 			struct vm_area_struct *vma);
 void unmap_mapping_range(struct address_space *mapping,
 		loff_t const holebegin, loff_t const holelen, int even_cows);
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+	unsigned long *pfn);
 int follow_phys(struct vm_area_struct *vma, unsigned long address,
 		unsigned int flags, unsigned long *prot, resource_size_t *phys);
 int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
@@ -824,8 +825,11 @@ static inline int handle_mm_fault(struct mm_struct *mm,
 extern int make_pages_present(unsigned long addr, unsigned long end);
 extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
 
-int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start,
-		int len, int write, int force, struct page **pages, struct vm_area_struct **vmas);
+int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
+			unsigned long start, int len, int write, int force,
+			struct page **pages, struct vm_area_struct **vmas);
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages);
 
 extern int try_to_release_page(struct page * page, gfp_t gfp_mask);
 extern void do_invalidatepage(struct page *page, unsigned long offset);
@@ -850,19 +854,6 @@ extern int mprotect_fixup(struct vm_area_struct *vma,
 			  unsigned long end, unsigned long newflags);
 
 /*
- * get_user_pages_fast provides equivalent functionality to get_user_pages,
- * operating on current and current->mm (force=0 and doesn't return any vmas).
- *
- * get_user_pages_fast may take mmap_sem and page tables, so no assumptions
- * can be made about locking. get_user_pages_fast is to be implemented in a
- * way that is advantageous (vs get_user_pages()) when the user memory area is
- * already faulted in and present in ptes. However if the pages have to be
- * faulted in, it may turn out to be slightly slower).
- */
-int get_user_pages_fast(unsigned long start, int nr_pages, int write,
-			struct page **pages);
-
-/*
  * A callback you can register to apply pressure to ageable caches.
  *
  * 'shrink' is passed a count 'nr_to_scan' and a 'gfpmask'.  It should
@@ -1061,7 +1052,8 @@ extern int __meminit __early_pfn_to_nid(unsigned long pfn);
 extern void set_dma_reserve(unsigned long new_dma_reserve);
 extern void memmap_init_zone(unsigned long, int, unsigned long,
 				unsigned long, enum memmap_context);
-extern void setup_per_zone_pages_min(void);
+extern void setup_per_zone_wmarks(void);
+extern void calculate_zone_inactive_ratio(struct zone *zone);
 extern void mem_init(void);
 extern void __init mmap_init(void);
 extern void show_mem(void);
@@ -1178,8 +1170,6 @@ void task_dirty_inc(struct task_struct *tsk);
 #define VM_MAX_READAHEAD	128	/* kbytes */
 #define VM_MIN_READAHEAD	16	/* kbytes (includes current page) */
 
-int do_page_cache_readahead(struct address_space *mapping, struct file *filp,
-			pgoff_t offset, unsigned long nr_to_read);
 int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
 			pgoff_t offset, unsigned long nr_to_read);
 
@@ -1197,6 +1187,9 @@ void page_cache_async_readahead(struct address_space *mapping,
 				unsigned long size);
 
 unsigned long max_sane_readahead(unsigned long nr);
+unsigned long ra_submit(struct file_ra_state *ra,
+			struct address_space *mapping,
+			struct file *filp);
 
 /* Do stack extension */
 extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 0e80e26ecf2..7acc8439d9b 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -98,6 +98,14 @@ struct page {
 #ifdef CONFIG_WANT_PAGE_DEBUG_FLAGS
 	unsigned long debug_flags;	/* Use atomic bitops on this */
 #endif
+
+#ifdef CONFIG_KMEMCHECK
+	/*
+	 * kmemcheck wants to track the status of each byte in a page; this
+	 * is a pointer to such a status block. NULL if not tracked.
+	 */
+	void *shadow;
+#endif
 };
 
 /*
@@ -232,6 +240,8 @@ struct mm_struct {
 
 	unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
 
+	s8 oom_adj;	/* OOM kill score adjustment (bit shift) */
+
 	cpumask_t cpu_vm_mask;
 
 	/* Architecture-specific MM context */
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index ea1bf5ba092..39751c8cde9 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -25,5 +25,15 @@
 
 #define SDIO_VENDOR_ID_MARVELL			0x02df
 #define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103
+#define SDIO_DEVICE_ID_MARVELL_8688WLAN		0x9104
+#define SDIO_DEVICE_ID_MARVELL_8688BT		0x9105
+
+#define SDIO_VENDOR_ID_SIANO			0x039a
+#define SDIO_DEVICE_ID_SIANO_NOVA_B0		0x0201
+#define SDIO_DEVICE_ID_SIANO_NICE		0x0202
+#define SDIO_DEVICE_ID_SIANO_VEGA_A0		0x0300
+#define SDIO_DEVICE_ID_SIANO_VENICE		0x0301
+#define SDIO_DEVICE_ID_SIANO_NOVA_A0		0x1100
+#define SDIO_DEVICE_ID_SIANO_STELLAR 		0x5347
 
 #endif
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index a47c879e130..88959853737 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -50,9 +50,6 @@ extern int page_group_by_mobility_disabled;
 
 static inline int get_pageblock_migratetype(struct page *page)
 {
-	if (unlikely(page_group_by_mobility_disabled))
-		return MIGRATE_UNMOVABLE;
-
 	return get_pageblock_flags_group(page, PB_migrate, PB_migrate_end);
 }
 
@@ -86,13 +83,8 @@ enum zone_stat_item {
 	NR_ACTIVE_ANON,		/*  "     "     "   "       "         */
 	NR_INACTIVE_FILE,	/*  "     "     "   "       "         */
 	NR_ACTIVE_FILE,		/*  "     "     "   "       "         */
-#ifdef CONFIG_UNEVICTABLE_LRU
 	NR_UNEVICTABLE,		/*  "     "     "   "       "         */
 	NR_MLOCK,		/* mlock()ed pages found and moved off LRU */
-#else
-	NR_UNEVICTABLE = NR_ACTIVE_FILE, /* avoid compiler errors in dead code */
-	NR_MLOCK = NR_ACTIVE_FILE,
-#endif
 	NR_ANON_PAGES,	/* Mapped anonymous pages */
 	NR_FILE_MAPPED,	/* pagecache pages mapped into pagetables.
 			   only modified from process context */
@@ -135,11 +127,7 @@ enum lru_list {
 	LRU_ACTIVE_ANON = LRU_BASE + LRU_ACTIVE,
 	LRU_INACTIVE_FILE = LRU_BASE + LRU_FILE,
 	LRU_ACTIVE_FILE = LRU_BASE + LRU_FILE + LRU_ACTIVE,
-#ifdef CONFIG_UNEVICTABLE_LRU
 	LRU_UNEVICTABLE,
-#else
-	LRU_UNEVICTABLE = LRU_ACTIVE_FILE, /* avoid compiler errors in dead code */
-#endif
 	NR_LRU_LISTS
 };
 
@@ -159,13 +147,20 @@ static inline int is_active_lru(enum lru_list l)
 
 static inline int is_unevictable_lru(enum lru_list l)
 {
-#ifdef CONFIG_UNEVICTABLE_LRU
 	return (l == LRU_UNEVICTABLE);
-#else
-	return 0;
-#endif
 }
 
+enum zone_watermarks {
+	WMARK_MIN,
+	WMARK_LOW,
+	WMARK_HIGH,
+	NR_WMARK
+};
+
+#define min_wmark_pages(z) (z->watermark[WMARK_MIN])
+#define low_wmark_pages(z) (z->watermark[WMARK_LOW])
+#define high_wmark_pages(z) (z->watermark[WMARK_HIGH])
+
 struct per_cpu_pages {
 	int count;		/* number of pages in the list */
 	int high;		/* high watermark, emptying needed */
@@ -278,7 +273,10 @@ struct zone_reclaim_stat {
 
 struct zone {
 	/* Fields commonly accessed by the page allocator */
-	unsigned long		pages_min, pages_low, pages_high;
+
+	/* zone watermarks, access with *_wmark_pages(zone) macros */
+	unsigned long watermark[NR_WMARK];
+
 	/*
 	 * We don't know if the memory that we're going to allocate will be freeable
 	 * or/and it will be released eventually, so to avoid totally wasting several
@@ -323,9 +321,9 @@ struct zone {
 
 	/* Fields commonly accessed by the page reclaim scanner */
 	spinlock_t		lru_lock;	
-	struct {
+	struct zone_lru {
 		struct list_head list;
-		unsigned long nr_scan;
+		unsigned long nr_saved_scan;	/* accumulated for batching */
 	} lru[NR_LRU_LISTS];
 
 	struct zone_reclaim_stat reclaim_stat;
diff --git a/include/linux/module.h b/include/linux/module.h
index a7bc6e7b43a..505f20dcc1c 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -697,4 +697,21 @@ static inline void module_remove_modinfo_attrs(struct module *mod)
 
 #define __MODULE_STRING(x) __stringify(x)
 
+
+#ifdef CONFIG_GENERIC_BUG
+int  module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+			 struct module *);
+void module_bug_cleanup(struct module *);
+
+#else	/* !CONFIG_GENERIC_BUG */
+
+static inline int  module_bug_finalize(const Elf_Ehdr *hdr,
+					const Elf_Shdr *sechdrs,
+					struct module *mod)
+{
+	return 0;
+}
+static inline void module_bug_cleanup(struct module *mod) {}
+#endif	/* CONFIG_GENERIC_BUG */
+
 #endif /* _LINUX_MODULE_H */
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
index 0e2e100c44a..3ceb0cc1bc7 100644
--- a/include/linux/net_dropmon.h
+++ b/include/linux/net_dropmon.h
@@ -3,12 +3,20 @@
 
 #include <linux/types.h>
 #include <linux/netlink.h>
+#include <linux/types.h>
 
 struct net_dm_drop_point {
 	__u8 pc[8];
 	__u32 count;
 };
 
+#define is_drop_point_hw(x) do {\
+	int ____i, ____j;\
+	for (____i = 0; ____i < 8; i ____i++)\
+		____j |= x[____i];\
+	____j;\
+} while (0)
+
 #define NET_DM_CFG_VERSION  0
 #define NET_DM_CFG_ALERT_COUNT  1
 #define NET_DM_CFG_ALERT_DELAY 2
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5a96a1a406e..9ea8d6dfe54 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -39,9 +39,11 @@
 
 #include <linux/device.h>
 #include <linux/percpu.h>
+#include <linux/rculist.h>
 #include <linux/dmaengine.h>
 #include <linux/workqueue.h>
 
+#include <linux/ethtool.h>
 #include <net/net_namespace.h>
 #include <net/dsa.h>
 #ifdef CONFIG_DCB
@@ -49,7 +51,6 @@
 #endif
 
 struct vlan_group;
-struct ethtool_ops;
 struct netpoll_info;
 /* 802.11 specific */
 struct wireless_dev;
@@ -210,6 +211,19 @@ struct dev_addr_list
 #define dmi_users	da_users
 #define dmi_gusers	da_gusers
 
+struct netdev_hw_addr {
+	struct list_head	list;
+	unsigned char		addr[MAX_ADDR_LEN];
+	unsigned char		type;
+#define NETDEV_HW_ADDR_T_LAN		1
+#define NETDEV_HW_ADDR_T_SAN		2
+#define NETDEV_HW_ADDR_T_SLAVE		3
+#define NETDEV_HW_ADDR_T_UNICAST	4
+	int			refcount;
+	bool			synced;
+	struct rcu_head		rcu_head;
+};
+
 struct hh_cache
 {
 	struct hh_cache *hh_next;	/* Next entry			     */
@@ -447,12 +461,25 @@ enum netdev_queue_state_t
 };
 
 struct netdev_queue {
+/*
+ * read mostly part
+ */
 	struct net_device	*dev;
 	struct Qdisc		*qdisc;
 	unsigned long		state;
-	spinlock_t		_xmit_lock;
-	int			xmit_lock_owner;
 	struct Qdisc		*qdisc_sleeping;
+/*
+ * write mostly part
+ */
+	spinlock_t		_xmit_lock ____cacheline_aligned_in_smp;
+	int			xmit_lock_owner;
+	/*
+	 * please use this field instead of dev->trans_start
+	 */
+	unsigned long		trans_start;
+	unsigned long		tx_bytes;
+	unsigned long		tx_packets;
+	unsigned long		tx_dropped;
 } ____cacheline_aligned_in_smp;
 
 
@@ -670,7 +697,9 @@ struct net_device
 #define NETIF_F_GRO		16384	/* Generic receive offload */
 #define NETIF_F_LRO		32768	/* large receive offload */
 
+/* the GSO_MASK reserves bits 16 through 23 */
 #define NETIF_F_FCOE_CRC	(1 << 24) /* FCoE CRC32 */
+#define NETIF_F_SCTP_CSUM	(1 << 25) /* SCTP checksum offload */
 
 	/* Segmentation offload features */
 #define NETIF_F_GSO_SHIFT	16
@@ -747,10 +776,11 @@ struct net_device
 	unsigned char		addr_len;	/* hardware address length	*/
 	unsigned short          dev_id;		/* for shared network cards */
 
-	spinlock_t		addr_list_lock;
-	struct dev_addr_list	*uc_list;	/* Secondary unicast mac addresses */
+	struct list_head	uc_list;	/* Secondary unicast mac
+						   addresses */
 	int			uc_count;	/* Number of installed ucasts	*/
 	int			uc_promisc;
+	spinlock_t		addr_list_lock;
 	struct dev_addr_list	*mc_list;	/* Multicast mac addresses	*/
 	int			mc_count;	/* Number of installed mcasts	*/
 	unsigned int		promiscuity;
@@ -776,8 +806,11 @@ struct net_device
  */
 	unsigned long		last_rx;	/* Time of last Rx	*/
 	/* Interface address info used in eth_type_trans() */
-	unsigned char		dev_addr[MAX_ADDR_LEN];	/* hw address, (before bcast
-							   because most packets are unicast) */
+	unsigned char		*dev_addr;	/* hw address, (before bcast
+						   because most packets are
+						   unicast) */
+
+	struct list_head	dev_addr_list; /* list of device hw addresses */
 
 	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
 
@@ -797,6 +830,11 @@ struct net_device
  * One part is mostly used on xmit path (device)
  */
 	/* These may be needed for future network-power-down code. */
+
+	/*
+	 * trans_start here is expensive for high speed devices on SMP,
+	 * please use netdev_queue->trans_start instead.
+	 */
 	unsigned long		trans_start;	/* Time (in jiffies) of last Tx	*/
 
 	int			watchdog_timeo; /* used by dev_watchdog() */
@@ -867,49 +905,10 @@ struct net_device
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
-
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	struct {
-		int			(*init)(struct net_device *dev);
-		void			(*uninit)(struct net_device *dev);
-		int			(*open)(struct net_device *dev);
-		int			(*stop)(struct net_device *dev);
-		int			(*hard_start_xmit) (struct sk_buff *skb,
-							    struct net_device *dev);
-		u16			(*select_queue)(struct net_device *dev,
-							struct sk_buff *skb);
-		void			(*change_rx_flags)(struct net_device *dev,
-							   int flags);
-		void			(*set_rx_mode)(struct net_device *dev);
-		void			(*set_multicast_list)(struct net_device *dev);
-		int			(*set_mac_address)(struct net_device *dev,
-							   void *addr);
-		int			(*validate_addr)(struct net_device *dev);
-		int			(*do_ioctl)(struct net_device *dev,
-						    struct ifreq *ifr, int cmd);
-		int			(*set_config)(struct net_device *dev,
-						      struct ifmap *map);
-		int			(*change_mtu)(struct net_device *dev, int new_mtu);
-		int			(*neigh_setup)(struct net_device *dev,
-						       struct neigh_parms *);
-		void			(*tx_timeout) (struct net_device *dev);
-		struct net_device_stats* (*get_stats)(struct net_device *dev);
-		void			(*vlan_rx_register)(struct net_device *dev,
-							    struct vlan_group *grp);
-		void			(*vlan_rx_add_vid)(struct net_device *dev,
-							   unsigned short vid);
-		void			(*vlan_rx_kill_vid)(struct net_device *dev,
-							    unsigned short vid);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-		void                    (*poll_controller)(struct net_device *dev);
-#endif
-	};
-#endif
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
 #define	NETDEV_ALIGN		32
-#define	NETDEV_ALIGN_CONST	(NETDEV_ALIGN - 1)
 
 static inline
 struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev,
@@ -980,9 +979,7 @@ static inline bool netdev_uses_trailer_tags(struct net_device *dev)
  */
 static inline void *netdev_priv(const struct net_device *dev)
 {
-	return (char *)dev + ((sizeof(struct net_device)
-			       + NETDEV_ALIGN_CONST)
-			      & ~NETDEV_ALIGN_CONST);
+	return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
 }
 
 /* Set the sysfs physical device reference for the network logical device
@@ -1012,6 +1009,12 @@ void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
 void netif_napi_del(struct napi_struct *napi);
 
 struct napi_gro_cb {
+	/* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */
+	void *frag0;
+
+	/* Length of frag0. */
+	unsigned int frag0_len;
+
 	/* This indicates where we are processing relative to skb->data. */
 	int data_offset;
 
@@ -1047,14 +1050,6 @@ struct packet_type {
 	struct list_head	list;
 };
 
-struct napi_gro_fraginfo {
-	skb_frag_t frags[MAX_SKB_FRAGS];
-	unsigned int nr_frags;
-	unsigned int ip_summed;
-	unsigned int len;
-	__wsum csum;
-};
-
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
 
@@ -1119,9 +1114,9 @@ extern int		dev_restart(struct net_device *dev);
 #ifdef CONFIG_NETPOLL_TRAP
 extern int		netpoll_trap(void);
 #endif
-extern void	      *skb_gro_header(struct sk_buff *skb, unsigned int hlen);
 extern int	       skb_gro_receive(struct sk_buff **head,
 				       struct sk_buff *skb);
+extern void	       skb_gro_reset_offset(struct sk_buff *skb);
 
 static inline unsigned int skb_gro_offset(const struct sk_buff *skb)
 {
@@ -1138,16 +1133,34 @@ static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len)
 	NAPI_GRO_CB(skb)->data_offset += len;
 }
 
-static inline void skb_gro_reset_offset(struct sk_buff *skb)
+static inline void *skb_gro_header_fast(struct sk_buff *skb,
+					unsigned int offset)
 {
-	NAPI_GRO_CB(skb)->data_offset = 0;
+	return NAPI_GRO_CB(skb)->frag0 + offset;
+}
+
+static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen)
+{
+	return NAPI_GRO_CB(skb)->frag0_len < hlen;
+}
+
+static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen,
+					unsigned int offset)
+{
+	NAPI_GRO_CB(skb)->frag0 = NULL;
+	NAPI_GRO_CB(skb)->frag0_len = 0;
+	return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL;
 }
 
 static inline void *skb_gro_mac_header(struct sk_buff *skb)
 {
-	return skb_mac_header(skb) < skb->data ? skb_mac_header(skb) :
-	       page_address(skb_shinfo(skb)->frags[0].page) +
-	       skb_shinfo(skb)->frags[0].page_offset;
+	return NAPI_GRO_CB(skb)->frag0 ?: skb_mac_header(skb);
+}
+
+static inline void *skb_gro_network_header(struct sk_buff *skb)
+{
+	return (NAPI_GRO_CB(skb)->frag0 ?: skb->data) +
+	       skb_network_offset(skb);
 }
 
 static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
@@ -1442,12 +1455,18 @@ extern int		napi_gro_receive(struct napi_struct *napi,
 					 struct sk_buff *skb);
 extern void		napi_reuse_skb(struct napi_struct *napi,
 				       struct sk_buff *skb);
-extern struct sk_buff *	napi_fraginfo_skb(struct napi_struct *napi,
-					  struct napi_gro_fraginfo *info);
+extern struct sk_buff *	napi_get_frags(struct napi_struct *napi);
 extern int		napi_frags_finish(struct napi_struct *napi,
 					  struct sk_buff *skb, int ret);
-extern int		napi_gro_frags(struct napi_struct *napi,
-				       struct napi_gro_fraginfo *info);
+extern struct sk_buff *	napi_frags_skb(struct napi_struct *napi);
+extern int		napi_gro_frags(struct napi_struct *napi);
+
+static inline void napi_free_frags(struct napi_struct *napi)
+{
+	kfree_skb(napi->skb);
+	napi->skb = NULL;
+}
+
 extern void		netif_nit_deliver(struct sk_buff *skb);
 extern int		dev_valid_name(const char *name);
 extern int		dev_ioctl(struct net *net, unsigned int cmd, void __user *);
@@ -1514,6 +1533,8 @@ static inline int netif_carrier_ok(const struct net_device *dev)
 	return !test_bit(__LINK_STATE_NOCARRIER, &dev->state);
 }
 
+extern unsigned long dev_trans_start(struct net_device *dev);
+
 extern void __netdev_watchdog_up(struct net_device *dev);
 
 extern void netif_carrier_on(struct net_device *dev);
@@ -1671,6 +1692,12 @@ static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
 	spin_unlock_bh(&txq->_xmit_lock);
 }
 
+static inline void txq_trans_update(struct netdev_queue *txq)
+{
+	if (txq->xmit_lock_owner != -1)
+		txq->trans_start = jiffies;
+}
+
 /**
  *	netif_tx_lock - grab network device transmit lock
  *	@dev: network device
@@ -1778,6 +1805,13 @@ static inline void netif_addr_unlock_bh(struct net_device *dev)
 	spin_unlock_bh(&dev->addr_list_lock);
 }
 
+/*
+ * dev_addr_list walker. Should be used only for read access. Call with
+ * rcu_read_lock held.
+ */
+#define for_each_dev_addr(dev, ha) \
+		list_for_each_entry_rcu(ha, &dev->dev_addr_list, list)
+
 /* These functions live elsewhere (drivers/net/net_init.c, but related) */
 
 extern void		ether_setup(struct net_device *dev);
@@ -1790,11 +1824,24 @@ extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 	alloc_netdev_mq(sizeof_priv, name, setup, 1)
 extern int		register_netdev(struct net_device *dev);
 extern void		unregister_netdev(struct net_device *dev);
+
+/* Functions used for device addresses handling */
+extern int dev_addr_add(struct net_device *dev, unsigned char *addr,
+			unsigned char addr_type);
+extern int dev_addr_del(struct net_device *dev, unsigned char *addr,
+			unsigned char addr_type);
+extern int dev_addr_add_multiple(struct net_device *to_dev,
+				 struct net_device *from_dev,
+				 unsigned char addr_type);
+extern int dev_addr_del_multiple(struct net_device *to_dev,
+				 struct net_device *from_dev,
+				 unsigned char addr_type);
+
 /* Functions used for secondary unicast and multicast support */
 extern void		dev_set_rx_mode(struct net_device *dev);
 extern void		__dev_set_rx_mode(struct net_device *dev);
-extern int		dev_unicast_delete(struct net_device *dev, void *addr, int alen);
-extern int		dev_unicast_add(struct net_device *dev, void *addr, int alen);
+extern int		dev_unicast_delete(struct net_device *dev, void *addr);
+extern int		dev_unicast_add(struct net_device *dev, void *addr);
 extern int		dev_unicast_sync(struct net_device *to, struct net_device *from);
 extern void		dev_unicast_unsync(struct net_device *to, struct net_device *from);
 extern int 		dev_mc_delete(struct net_device *dev, void *addr, int alen, int all);
@@ -1856,15 +1903,14 @@ static inline int net_gso_ok(int features, int gso_type)
 
 static inline int skb_gso_ok(struct sk_buff *skb, int features)
 {
-	return net_gso_ok(features, skb_shinfo(skb)->gso_type);
+	return net_gso_ok(features, skb_shinfo(skb)->gso_type) &&
+	       (!skb_has_frags(skb) || (features & NETIF_F_FRAGLIST));
 }
 
 static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
 {
 	return skb_is_gso(skb) &&
 	       (!skb_gso_ok(skb, dev->features) ||
-	        (skb_shinfo(skb)->frag_list &&
-	         !(dev->features & NETIF_F_FRAGLIST)) ||
 		unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
 }
 
@@ -1874,6 +1920,16 @@ static inline void netif_set_gso_max_size(struct net_device *dev,
 	dev->gso_max_size = size;
 }
 
+static inline void skb_bond_set_mac_by_master(struct sk_buff *skb,
+					      struct net_device *master)
+{
+	if (skb->pkt_type == PACKET_HOST) {
+		u16 *dest = (u16 *) eth_hdr(skb)->h_dest;
+
+		memcpy(dest, master->dev_addr, ETH_ALEN);
+	}
+}
+
 /* On bonding slaves other than the currently active slave, suppress
  * duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and
  * ARP on active-backup slaves with arp_validate enabled.
@@ -1887,6 +1943,14 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
 		if (master->priv_flags & IFF_MASTER_ARPMON)
 			dev->last_rx = jiffies;
 
+		if ((master->priv_flags & IFF_MASTER_ALB) && master->br_port) {
+			/* Do address unmangle. The local destination address
+			 * will be always the one master has. Provides the right
+			 * functionality in a bridge.
+			 */
+			skb_bond_set_mac_by_master(skb, master);
+		}
+
 		if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
 			if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
 			    skb->protocol == __cpu_to_be16(ETH_P_ARP))
@@ -1908,6 +1972,28 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
 }
 
 extern struct pernet_operations __net_initdata loopback_net_ops;
+
+static inline int dev_ethtool_get_settings(struct net_device *dev,
+					   struct ethtool_cmd *cmd)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+		return -EOPNOTSUPP;
+	return dev->ethtool_ops->get_settings(dev, cmd);
+}
+
+static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum)
+		return 0;
+	return dev->ethtool_ops->get_rx_csum(dev);
+}
+
+static inline u32 dev_ethtool_get_flags(struct net_device *dev)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_flags)
+		return 0;
+	return dev->ethtool_ops->get_flags(dev);
+}
 #endif /* __KERNEL__ */
 
-#endif	/* _LINUX_DEV_H */
+#endif	/* _LINUX_NETDEVICE_H */
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index af9d2fb9721..2aea50399c0 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -33,6 +33,7 @@ header-y += xt_limit.h
 header-y += xt_mac.h
 header-y += xt_mark.h
 header-y += xt_multiport.h
+header-y += xt_osf.h
 header-y += xt_owner.h
 header-y += xt_pkttype.h
 header-y += xt_quota.h
diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h
index 885cbe28226..a8248ee422b 100644
--- a/include/linux/netfilter/nf_conntrack_common.h
+++ b/include/linux/netfilter/nf_conntrack_common.h
@@ -75,75 +75,6 @@ enum ip_conntrack_status {
 	IPS_FIXED_TIMEOUT = (1 << IPS_FIXED_TIMEOUT_BIT),
 };
 
-/* Connection tracking event bits */
-enum ip_conntrack_events
-{
-	/* New conntrack */
-	IPCT_NEW_BIT = 0,
-	IPCT_NEW = (1 << IPCT_NEW_BIT),
-
-	/* Expected connection */
-	IPCT_RELATED_BIT = 1,
-	IPCT_RELATED = (1 << IPCT_RELATED_BIT),
-
-	/* Destroyed conntrack */
-	IPCT_DESTROY_BIT = 2,
-	IPCT_DESTROY = (1 << IPCT_DESTROY_BIT),
-
-	/* Timer has been refreshed */
-	IPCT_REFRESH_BIT = 3,
-	IPCT_REFRESH = (1 << IPCT_REFRESH_BIT),
-
-	/* Status has changed */
-	IPCT_STATUS_BIT = 4,
-	IPCT_STATUS = (1 << IPCT_STATUS_BIT),
-
-	/* Update of protocol info */
-	IPCT_PROTOINFO_BIT = 5,
-	IPCT_PROTOINFO = (1 << IPCT_PROTOINFO_BIT),
-
-	/* Volatile protocol info */
-	IPCT_PROTOINFO_VOLATILE_BIT = 6,
-	IPCT_PROTOINFO_VOLATILE = (1 << IPCT_PROTOINFO_VOLATILE_BIT),
-
-	/* New helper for conntrack */
-	IPCT_HELPER_BIT = 7,
-	IPCT_HELPER = (1 << IPCT_HELPER_BIT),
-
-	/* Update of helper info */
-	IPCT_HELPINFO_BIT = 8,
-	IPCT_HELPINFO = (1 << IPCT_HELPINFO_BIT),
-
-	/* Volatile helper info */
-	IPCT_HELPINFO_VOLATILE_BIT = 9,
-	IPCT_HELPINFO_VOLATILE = (1 << IPCT_HELPINFO_VOLATILE_BIT),
-
-	/* NAT info */
-	IPCT_NATINFO_BIT = 10,
-	IPCT_NATINFO = (1 << IPCT_NATINFO_BIT),
-
-	/* Counter highest bit has been set, unused */
-	IPCT_COUNTER_FILLING_BIT = 11,
-	IPCT_COUNTER_FILLING = (1 << IPCT_COUNTER_FILLING_BIT),
-
-	/* Mark is set */
-	IPCT_MARK_BIT = 12,
-	IPCT_MARK = (1 << IPCT_MARK_BIT),
-
-	/* NAT sequence adjustment */
-	IPCT_NATSEQADJ_BIT = 13,
-	IPCT_NATSEQADJ = (1 << IPCT_NATSEQADJ_BIT),
-
-	/* Secmark is set */
-	IPCT_SECMARK_BIT = 14,
-	IPCT_SECMARK = (1 << IPCT_SECMARK_BIT),
-};
-
-enum ip_conntrack_expect_events {
-	IPEXP_NEW_BIT = 0,
-	IPEXP_NEW = (1 << IPEXP_NEW_BIT),
-};
-
 #ifdef __KERNEL__
 struct ip_conntrack_stat
 {
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index b2f384d4261..4352feed237 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -15,7 +15,8 @@ enum tcp_conntrack {
 	TCP_CONNTRACK_LAST_ACK,
 	TCP_CONNTRACK_TIME_WAIT,
 	TCP_CONNTRACK_CLOSE,
-	TCP_CONNTRACK_LISTEN,
+	TCP_CONNTRACK_LISTEN,	/* obsolete */
+#define TCP_CONNTRACK_SYN_SENT2	TCP_CONNTRACK_LISTEN
 	TCP_CONNTRACK_MAX,
 	TCP_CONNTRACK_IGNORE
 };
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
index c600083cbdf..bff4d5741d9 100644
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@@ -46,7 +46,8 @@ struct nfgenmsg {
 #define NFNL_SUBSYS_CTNETLINK_EXP	2
 #define NFNL_SUBSYS_QUEUE		3
 #define NFNL_SUBSYS_ULOG		4
-#define NFNL_SUBSYS_COUNT		5
+#define NFNL_SUBSYS_OSF			5
+#define NFNL_SUBSYS_COUNT		6
 
 #ifdef __KERNEL__
 
@@ -75,7 +76,7 @@ extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n);
 
 extern int nfnetlink_has_listeners(unsigned int group);
 extern int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, 
-			  int echo);
+			  int echo, gfp_t flags);
 extern void nfnetlink_set_err(u32 pid, u32 group, int error);
 extern int nfnetlink_unicast(struct sk_buff *skb, u_int32_t pid, int flags);
 
diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h
index 1a865e48b8e..ed4ef8d0b11 100644
--- a/include/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/linux/netfilter/nfnetlink_conntrack.h
@@ -101,6 +101,7 @@ enum ctattr_protoinfo_dccp {
 	CTA_PROTOINFO_DCCP_UNSPEC,
 	CTA_PROTOINFO_DCCP_STATE,
 	CTA_PROTOINFO_DCCP_ROLE,
+	CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ,
 	__CTA_PROTOINFO_DCCP_MAX,
 };
 #define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1)
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index c9efe039dc5..1030b759389 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -184,9 +184,10 @@ struct xt_counters_info
  * @matchinfo:	per-match data
  * @fragoff:	packet is a fragment, this is the data offset
  * @thoff:	position of transport header relative to skb->data
- * @hotdrop:	drop packet if we had inspection problems
+ * @hook:	hook number given packet came from
  * @family:	Actual NFPROTO_* through which the function is invoked
  * 		(helpful when match->family == NFPROTO_UNSPEC)
+ * @hotdrop:	drop packet if we had inspection problems
  */
 struct xt_match_param {
 	const struct net_device *in, *out;
@@ -194,8 +195,9 @@ struct xt_match_param {
 	const void *matchinfo;
 	int fragoff;
 	unsigned int thoff;
-	bool *hotdrop;
+	unsigned int hooknum;
 	u_int8_t family;
+	bool *hotdrop;
 };
 
 /**
diff --git a/include/linux/netfilter/xt_NFQUEUE.h b/include/linux/netfilter/xt_NFQUEUE.h
index 982a89f7827..2584f4a777d 100644
--- a/include/linux/netfilter/xt_NFQUEUE.h
+++ b/include/linux/netfilter/xt_NFQUEUE.h
@@ -15,4 +15,9 @@ struct xt_NFQ_info {
 	__u16 queuenum;
 };
 
+struct xt_NFQ_info_v1 {
+	__u16 queuenum;
+	__u16 queues_total;
+};
+
 #endif /* _XT_NFQ_TARGET_H */
diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h
new file mode 100644
index 00000000000..fd2272e0959
--- /dev/null
+++ b/include/linux/netfilter/xt_osf.h
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2003+ Evgeniy Polyakov <johnpol@2ka.mxt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _XT_OSF_H
+#define _XT_OSF_H
+
+#define MAXGENRELEN		32
+
+#define XT_OSF_GENRE		(1<<0)
+#define	XT_OSF_TTL		(1<<1)
+#define XT_OSF_LOG		(1<<2)
+#define XT_OSF_INVERT		(1<<3)
+
+#define XT_OSF_LOGLEVEL_ALL	0	/* log all matched fingerprints */
+#define XT_OSF_LOGLEVEL_FIRST	1	/* log only the first matced fingerprint */
+#define XT_OSF_LOGLEVEL_ALL_KNOWN	2 /* do not log unknown packets */
+
+#define XT_OSF_TTL_TRUE		0	/* True ip and fingerprint TTL comparison */
+#define XT_OSF_TTL_LESS		1	/* Check if ip TTL is less than fingerprint one */
+#define XT_OSF_TTL_NOCHECK	2	/* Do not compare ip and fingerprint TTL at all */
+
+struct xt_osf_info {
+	char			genre[MAXGENRELEN];
+	__u32			len;
+	__u32			flags;
+	__u32			loglevel;
+	__u32			ttl;
+};
+
+/*
+ * Wildcard MSS (kind of).
+ * It is used to implement a state machine for the different wildcard values
+ * of the MSS and window sizes.
+ */
+struct xt_osf_wc {
+	__u32			wc;
+	__u32			val;
+};
+
+/*
+ * This struct represents IANA options
+ * http://www.iana.org/assignments/tcp-parameters
+ */
+struct xt_osf_opt {
+	__u16			kind, length;
+	struct xt_osf_wc	wc;
+};
+
+struct xt_osf_user_finger {
+	struct xt_osf_wc	wss;
+
+	__u8			ttl, df;
+	__u16			ss, mss;
+	__u16			opt_num;
+
+	char			genre[MAXGENRELEN];
+	char			version[MAXGENRELEN];
+	char			subtype[MAXGENRELEN];
+
+	/* MAX_IPOPTLEN is maximum if all options are NOPs or EOLs */
+	struct xt_osf_opt	opt[MAX_IPOPTLEN];
+};
+
+struct xt_osf_nlmsg {
+	struct xt_osf_user_finger	f;
+	struct iphdr		ip;
+	struct tcphdr		tcp;
+};
+
+/* Defines for IANA option kinds */
+
+enum iana_options {
+	OSFOPT_EOL = 0,		/* End of options */
+	OSFOPT_NOP, 		/* NOP */
+	OSFOPT_MSS, 		/* Maximum segment size */
+	OSFOPT_WSO, 		/* Window scale option */
+	OSFOPT_SACKP,		/* SACK permitted */
+	OSFOPT_SACK,		/* SACK */
+	OSFOPT_ECHO,
+	OSFOPT_ECHOREPLY,
+	OSFOPT_TS,		/* Timestamp option */
+	OSFOPT_POCP,		/* Partial Order Connection Permitted */
+	OSFOPT_POSP,		/* Partial Order Service Profile */
+
+	/* Others are not used in the current OSF */
+	OSFOPT_EMPTY = 255,
+};
+
+/*
+ * Initial window size option state machine: multiple of mss, mtu or
+ * plain numeric value. Can also be made as plain numeric value which
+ * is not a multiple of specified value.
+ */
+enum xt_osf_window_size_options {
+	OSF_WSS_PLAIN	= 0,
+	OSF_WSS_MSS,
+	OSF_WSS_MTU,
+	OSF_WSS_MODULO,
+	OSF_WSS_MAX,
+};
+
+/*
+ * Add/remove fingerprint from the kernel.
+ */
+enum xt_osf_msg_types {
+	OSF_MSG_ADD,
+	OSF_MSG_REMOVE,
+	OSF_MSG_MAX,
+};
+
+enum xt_osf_attr_type {
+	OSF_ATTR_UNSPEC,
+	OSF_ATTR_FINGER,
+	OSF_ATTR_MAX,
+};
+
+#endif				/* _XT_OSF_H */
diff --git a/include/linux/netfilter/xt_socket.h b/include/linux/netfilter/xt_socket.h
new file mode 100644
index 00000000000..6f475b8ff34
--- /dev/null
+++ b/include/linux/netfilter/xt_socket.h
@@ -0,0 +1,12 @@
+#ifndef _XT_SOCKET_H
+#define _XT_SOCKET_H
+
+enum {
+	XT_SOCKET_TRANSPARENT = 1 << 0,
+};
+
+struct xt_socket_mtinfo1 {
+	__u8 flags;
+};
+
+#endif /* _XT_SOCKET_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index cbe8ce3bf48..dbea93b694e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -7,7 +7,7 @@
  * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
  * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
  * Copyright 2008 Michael Buesch <mb@bu3sch.de>
- * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  *
@@ -25,6 +25,8 @@
  *
  */
 
+#include <linux/types.h>
+
 /**
  * DOC: Station handling
  *
@@ -46,8 +48,10 @@
  *	to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.
@@ -75,8 +79,8 @@
  * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
  *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
  * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
- *	attributes.
+ *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ *	and %NL80211_ATTR_KEY_SEQ attributes.
  * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
  *	or %NL80211_ATTR_MAC.
  *
@@ -166,6 +170,22 @@
  * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
  * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
  * 	to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ * 	has been found while world roaming thus enabling active scan or
+ * 	any mode of operation that initiates TX (beacons) on a channel
+ * 	where we would not have been able to do either before. As an example
+ * 	if you are world roaming (regulatory domain set to world or if your
+ * 	driver is using a custom world roaming regulatory domain) and while
+ * 	doing a passive scan on the 5 GHz band you find an AP there (if not
+ * 	on a DFS channel) you will now be able to actively scan for that AP
+ * 	or use AP mode on your card on that same channel. Note that this will
+ * 	never be used for channels 1-11 on the 2 GHz band as they are always
+ * 	enabled world wide. This beacon hint is only sent if your device had
+ * 	either disabled active scanning or beaconing on a channel. We send to
+ * 	userspace the wiphy on which we removed a restriction from
+ * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * 	the beacon hint was processed.
  *
  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
  *	This command is used both as a command (request to authenticate) and
@@ -185,8 +205,12 @@
  *	frame, i.e., it was for the local STA and was received in correct
  *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
  *	MLME SAP interface (kernel providing MLME, userspace SME). The
- *	included NL80211_ATTR_FRAME attribute contains the management frame
- *	(including both the header and frame body, but not FCS).
+ *	included %NL80211_ATTR_FRAME attribute contains the management frame
+ *	(including both the header and frame body, but not FCS). This event is
+ *	also used to indicate if the authentication attempt timed out. In that
+ *	case the %NL80211_ATTR_FRAME attribute is replaced with a
+ *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ *	pending authentication timed out).
  * @NL80211_CMD_ASSOCIATE: association request and notification; like
  *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
  *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
@@ -199,6 +223,25 @@
  *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
  *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
  *
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
+ *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
+ *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
+ *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
+ *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
+ *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
+ *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
+ *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ *	FREQ attribute (for the initial frequency if no peer can be found)
+ *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ *	should be fixed rather than automatically determined. Can only be
+ *	executed on a network interface that is UP, and fixed BSSID/FREQ
+ *	may be rejected. Another optional parameter is the beacon interval,
+ *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ *	given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ *	determined by the network interface.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -260,6 +303,13 @@ enum nl80211_commands {
 	NL80211_CMD_DEAUTHENTICATE,
 	NL80211_CMD_DISASSOCIATE,
 
+	NL80211_CMD_MICHAEL_MIC_FAILURE,
+
+	NL80211_CMD_REG_BEACON_HINT,
+
+	NL80211_CMD_JOIN_IBSS,
+	NL80211_CMD_LEAVE_IBSS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -278,6 +328,7 @@ enum nl80211_commands {
 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -296,6 +347,18 @@ enum nl80211_commands {
  *	NL80211_CHAN_HT20 = HT20 only
  *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
  *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ *	less than or equal to the RTS threshold; allowed range: 1..255;
+ *	dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ *	greater than the RTS threshold; allowed range: 1..255;
+ *	dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ *	length in octets for frames; allowed range: 256..8000, disable
+ *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ *	larger than or equal to this use RTS/CTS handshake); allowed range:
+ *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
@@ -319,7 +382,7 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
  * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- *	&enum nl80211_sta_flags.
+ *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
  * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
  *	IEEE 802.11 7.3.1.6 (u16).
  * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
@@ -380,6 +443,8 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
  *	a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
+ *	that can be added to a scan request
  *
  * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
  * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
@@ -408,6 +473,44 @@ enum nl80211_commands {
  * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
  *	%NL80211_CMD_DISASSOCIATE, u16
  *
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
+ *	a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _before_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _after_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ *	cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ *	for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ *	used for the association (&enum nl80211_mfp, represented as a u32);
+ *	this attribute can be used
+ *	with %NL80211_CMD_ASSOCIATE request
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ *	&struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ *	request, the driver will assume that the port is unauthorized until
+ *	authorized by user space. Otherwise, port is marked authorized by
+ *	default in station mode.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -492,6 +595,30 @@ enum nl80211_attrs {
 	NL80211_ATTR_AUTH_TYPE,
 	NL80211_ATTR_REASON_CODE,
 
+	NL80211_ATTR_KEY_TYPE,
+
+	NL80211_ATTR_MAX_SCAN_IE_LEN,
+	NL80211_ATTR_CIPHER_SUITES,
+
+	NL80211_ATTR_FREQ_BEFORE,
+	NL80211_ATTR_FREQ_AFTER,
+
+	NL80211_ATTR_FREQ_FIXED,
+
+
+	NL80211_ATTR_WIPHY_RETRY_SHORT,
+	NL80211_ATTR_WIPHY_RETRY_LONG,
+	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+	NL80211_ATTR_TIMED_OUT,
+
+	NL80211_ATTR_USE_MFP,
+
+	NL80211_ATTR_STA_FLAGS2,
+
+	NL80211_ATTR_CONTROL_PORT,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -581,6 +708,18 @@ enum nl80211_sta_flags {
 };
 
 /**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+	__u32 mask;
+	__u32 set;
+} __attribute__((packed));
+
+/**
  * enum nl80211_rate_info - bitrate information
  *
  * These attribute types are used with %NL80211_STA_INFO_TXRATE
@@ -1062,4 +1201,27 @@ enum nl80211_auth_type {
 	NL80211_AUTHTYPE_FT,
 	NL80211_AUTHTYPE_NETWORK_EAP,
 };
+
+/**
+ * enum nl80211_key_type - Key Type
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ */
+enum nl80211_key_type {
+	NL80211_KEYTYPE_GROUP,
+	NL80211_KEYTYPE_PAIRWISE,
+	NL80211_KEYTYPE_PEERKEY,
+};
+
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+	NL80211_MFP_NO,
+	NL80211_MFP_REQUIRED,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
new file mode 100644
index 00000000000..2cda00ccfcc
--- /dev/null
+++ b/include/linux/nl802154.h
@@ -0,0 +1,119 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef NL802154_H
+#define NL802154_H
+
+#define IEEE802154_NL_NAME "802.15.4 MAC"
+#define IEEE802154_MCAST_COORD_NAME "coordinator"
+#define IEEE802154_MCAST_BEACON_NAME "beacon"
+
+enum {
+	__IEEE802154_ATTR_INVALID,
+
+	IEEE802154_ATTR_DEV_NAME,
+	IEEE802154_ATTR_DEV_INDEX,
+
+	IEEE802154_ATTR_STATUS,
+
+	IEEE802154_ATTR_SHORT_ADDR,
+	IEEE802154_ATTR_HW_ADDR,
+	IEEE802154_ATTR_PAN_ID,
+
+	IEEE802154_ATTR_CHANNEL,
+
+	IEEE802154_ATTR_COORD_SHORT_ADDR,
+	IEEE802154_ATTR_COORD_HW_ADDR,
+	IEEE802154_ATTR_COORD_PAN_ID,
+
+	IEEE802154_ATTR_SRC_SHORT_ADDR,
+	IEEE802154_ATTR_SRC_HW_ADDR,
+	IEEE802154_ATTR_SRC_PAN_ID,
+
+	IEEE802154_ATTR_DEST_SHORT_ADDR,
+	IEEE802154_ATTR_DEST_HW_ADDR,
+	IEEE802154_ATTR_DEST_PAN_ID,
+
+	IEEE802154_ATTR_CAPABILITY,
+	IEEE802154_ATTR_REASON,
+	IEEE802154_ATTR_SCAN_TYPE,
+	IEEE802154_ATTR_CHANNELS,
+	IEEE802154_ATTR_DURATION,
+	IEEE802154_ATTR_ED_LIST,
+	IEEE802154_ATTR_BCN_ORD,
+	IEEE802154_ATTR_SF_ORD,
+	IEEE802154_ATTR_PAN_COORD,
+	IEEE802154_ATTR_BAT_EXT,
+	IEEE802154_ATTR_COORD_REALIGN,
+	IEEE802154_ATTR_SEC,
+
+	__IEEE802154_ATTR_MAX,
+};
+
+#define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1)
+
+extern struct nla_policy ieee802154_policy[];
+
+/* commands */
+/* REQ should be responded with CONF
+ * and INDIC with RESP
+ */
+enum {
+	__IEEE802154_COMMAND_INVALID,
+
+	IEEE802154_ASSOCIATE_REQ,
+	IEEE802154_ASSOCIATE_CONF,
+	IEEE802154_DISASSOCIATE_REQ,
+	IEEE802154_DISASSOCIATE_CONF,
+	IEEE802154_GET_REQ,
+	IEEE802154_GET_CONF,
+	IEEE802154_RESET_REQ,
+	IEEE802154_RESET_CONF,
+	IEEE802154_SCAN_REQ,
+	IEEE802154_SCAN_CONF,
+	IEEE802154_SET_REQ,
+	IEEE802154_SET_CONF,
+	IEEE802154_START_REQ,
+	IEEE802154_START_CONF,
+	IEEE802154_SYNC_REQ,
+	IEEE802154_POLL_REQ,
+	IEEE802154_POLL_CONF,
+
+	IEEE802154_ASSOCIATE_INDIC,
+	IEEE802154_ASSOCIATE_RESP,
+	IEEE802154_DISASSOCIATE_INDIC,
+	IEEE802154_BEACON_NOTIFY_INDIC,
+	IEEE802154_ORPHAN_INDIC,
+	IEEE802154_ORPHAN_RESP,
+	IEEE802154_COMM_STATUS_INDIC,
+	IEEE802154_SYNC_LOSS_INDIC,
+
+	IEEE802154_GTS_REQ, /* Not supported yet */
+	IEEE802154_GTS_INDIC, /* Not supported yet */
+	IEEE802154_GTS_CONF, /* Not supported yet */
+	IEEE802154_RX_ENABLE_REQ, /* Not supported yet */
+	IEEE802154_RX_ENABLE_CONF, /* Not supported yet */
+
+	__IEEE802154_CMD_MAX,
+};
+
+#define IEEE802154_CMD_MAX (__IEEE802154_CMD_MAX - 1)
+
+#endif
diff --git a/include/linux/nls.h b/include/linux/nls.h
index 52b1a76c1b4..d47beef08df 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -3,8 +3,23 @@
 
 #include <linux/init.h>
 
-/* unicode character */
-typedef __u16 wchar_t;
+/* Unicode has changed over the years.  Unicode code points no longer
+ * fit into 16 bits; as of Unicode 5 valid code points range from 0
+ * to 0x10ffff (17 planes, where each plane holds 65536 code points).
+ *
+ * The original decision to represent Unicode characters as 16-bit
+ * wchar_t values is now outdated.  But plane 0 still includes the
+ * most commonly used characters, so we will retain it.  The newer
+ * 32-bit unicode_t type can be used when it is necessary to
+ * represent the full Unicode character set.
+ */
+
+/* Plane-0 Unicode character */
+typedef u16 wchar_t;
+#define MAX_WCHAR_T	0xffff
+
+/* Arbitrary Unicode character */
+typedef u32 unicode_t;
 
 struct nls_table {
 	const char *charset;
@@ -21,6 +36,13 @@ struct nls_table {
 /* this value hold the maximum octet of charset */
 #define NLS_MAX_CHARSET_SIZE 6 /* for UTF-8 */
 
+/* Byte order for UTF-16 strings */
+enum utf16_endian {
+	UTF16_HOST_ENDIAN,
+	UTF16_LITTLE_ENDIAN,
+	UTF16_BIG_ENDIAN
+};
+
 /* nls.c */
 extern int register_nls(struct nls_table *);
 extern int unregister_nls(struct nls_table *);
@@ -28,10 +50,11 @@ extern struct nls_table *load_nls(char *);
 extern void unload_nls(struct nls_table *);
 extern struct nls_table *load_nls_default(void);
 
-extern int utf8_mbtowc(wchar_t *, const __u8 *, int);
-extern int utf8_mbstowcs(wchar_t *, const __u8 *, int);
-extern int utf8_wctomb(__u8 *, wchar_t, int);
-extern int utf8_wcstombs(__u8 *, const wchar_t *, int);
+extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu);
+extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen);
+extern int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs);
+extern int utf16s_to_utf8s(const wchar_t *pwcs, int len,
+		enum utf16_endian endian, u8 *s, int maxlen);
 
 static inline unsigned char nls_tolower(struct nls_table *t, unsigned char c)
 {
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index 848025cd708..829b94b156f 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -408,6 +408,19 @@ static inline int num_node_state(enum node_states state)
 #define next_online_node(nid)	next_node((nid), node_states[N_ONLINE])
 
 extern int nr_node_ids;
+extern int nr_online_nodes;
+
+static inline void node_set_online(int nid)
+{
+	node_set_state(nid, N_ONLINE);
+	nr_online_nodes = num_node_state(N_ONLINE);
+}
+
+static inline void node_set_offline(int nid)
+{
+	node_clear_state(nid, N_ONLINE);
+	nr_online_nodes = num_node_state(N_ONLINE);
+}
 #else
 
 static inline int node_state(int node, enum node_states state)
@@ -434,7 +447,10 @@ static inline int num_node_state(enum node_states state)
 #define first_online_node	0
 #define next_online_node(nid)	(MAX_NUMNODES)
 #define nr_node_ids		1
+#define nr_online_nodes		1
 
+#define node_set_online(node)	   node_set_state((node), N_ONLINE)
+#define node_set_offline(node)	   node_clear_state((node), N_ONLINE)
 #endif
 
 #define node_online_map 	node_states[N_ONLINE]
@@ -454,9 +470,6 @@ static inline int num_node_state(enum node_states state)
 #define node_online(node)	node_state((node), N_ONLINE)
 #define node_possible(node)	node_state((node), N_POSSIBLE)
 
-#define node_set_online(node)	   node_set_state((node), N_ONLINE)
-#define node_set_offline(node)	   node_clear_state((node), N_ONLINE)
-
 #define for_each_node(node)	   for_each_node_state(node, N_POSSIBLE)
 #define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
 
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index b86fa2ffca0..81bc252dc8a 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -198,6 +198,7 @@ static inline int notifier_to_errno(int ret)
 #define NETDEV_CHANGENAME	0x000A
 #define NETDEV_FEAT_CHANGE	0x000B
 #define NETDEV_BONDING_FAILOVER 0x000C
+#define NETDEV_PRE_UP		0x000D
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
diff --git a/include/linux/of.h b/include/linux/of.h
index 6a7efa242f5..7be2d1043c1 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -77,6 +77,9 @@ extern int of_n_size_cells(struct device_node *np);
 extern const struct of_device_id *of_match_node(
 	const struct of_device_id *matches, const struct device_node *node);
 extern int of_modalias_node(struct device_node *node, char *modalias, int len);
+extern struct device_node *of_parse_phandle(struct device_node *np,
+					    const char *phandle_name,
+					    int index);
 extern int of_parse_phandles_with_args(struct device_node *np,
 	const char *list_name, const char *cells_name, int index,
 	struct device_node **out_node, const void **out_args);
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
new file mode 100644
index 00000000000..c9663c69030
--- /dev/null
+++ b/include/linux/of_mdio.h
@@ -0,0 +1,22 @@
+/*
+ * OF helpers for the MDIO (Ethernet PHY) API
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_MDIO_H
+#define __LINUX_OF_MDIO_H
+
+#include <linux/phy.h>
+#include <linux/of.h>
+
+extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np);
+extern struct phy_device *of_phy_find_device(struct device_node *phy_np);
+extern struct phy_device *of_phy_connect(struct net_device *dev,
+					 struct device_node *phy_np,
+					 void (*hndlr)(struct net_device *),
+					 u32 flags, phy_interface_t iface);
+
+#endif /* __LINUX_OF_MDIO_H */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 62214c7d2d9..d6792f88a17 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -95,9 +95,7 @@ enum pageflags {
 	PG_reclaim,		/* To be reclaimed asap */
 	PG_buddy,		/* Page is free, on buddy lists */
 	PG_swapbacked,		/* Page is backed by RAM/swap */
-#ifdef CONFIG_UNEVICTABLE_LRU
 	PG_unevictable,		/* Page is "unevictable"  */
-#endif
 #ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
 	PG_mlocked,		/* Page is vma mlocked */
 #endif
@@ -248,14 +246,8 @@ PAGEFLAG_FALSE(SwapCache)
 	SETPAGEFLAG_NOOP(SwapCache) CLEARPAGEFLAG_NOOP(SwapCache)
 #endif
 
-#ifdef CONFIG_UNEVICTABLE_LRU
 PAGEFLAG(Unevictable, unevictable) __CLEARPAGEFLAG(Unevictable, unevictable)
 	TESTCLEARFLAG(Unevictable, unevictable)
-#else
-PAGEFLAG_FALSE(Unevictable) TESTCLEARFLAG_FALSE(Unevictable)
-	SETPAGEFLAG_NOOP(Unevictable) CLEARPAGEFLAG_NOOP(Unevictable)
-	__CLEARPAGEFLAG_NOOP(Unevictable)
-#endif
 
 #ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
 #define MLOCK_PAGES 1
@@ -382,12 +374,6 @@ static inline void __ClearPageTail(struct page *page)
 
 #endif /* !PAGEFLAGS_EXTENDED */
 
-#ifdef CONFIG_UNEVICTABLE_LRU
-#define __PG_UNEVICTABLE	(1 << PG_unevictable)
-#else
-#define __PG_UNEVICTABLE	0
-#endif
-
 #ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
 #define __PG_MLOCKED		(1 << PG_mlocked)
 #else
@@ -403,7 +389,7 @@ static inline void __ClearPageTail(struct page *page)
 	 1 << PG_private | 1 << PG_private_2 | \
 	 1 << PG_buddy	 | 1 << PG_writeback | 1 << PG_reserved | \
 	 1 << PG_slab	 | 1 << PG_swapcache | 1 << PG_active | \
-	 __PG_UNEVICTABLE | __PG_MLOCKED)
+	 1 << PG_unevictable | __PG_MLOCKED)
 
 /*
  * Flags checked when a page is prepped for return by the page allocator.
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 34da5230faa..aec3252afcf 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -22,9 +22,7 @@ enum mapping_flags {
 	AS_EIO		= __GFP_BITS_SHIFT + 0,	/* IO error on async write */
 	AS_ENOSPC	= __GFP_BITS_SHIFT + 1,	/* ENOSPC on async write */
 	AS_MM_ALL_LOCKS	= __GFP_BITS_SHIFT + 2,	/* under mm_take_all_locks() */
-#ifdef CONFIG_UNEVICTABLE_LRU
 	AS_UNEVICTABLE	= __GFP_BITS_SHIFT + 3,	/* e.g., ramdisk, SHM_LOCK */
-#endif
 };
 
 static inline void mapping_set_error(struct address_space *mapping, int error)
@@ -37,8 +35,6 @@ static inline void mapping_set_error(struct address_space *mapping, int error)
 	}
 }
 
-#ifdef CONFIG_UNEVICTABLE_LRU
-
 static inline void mapping_set_unevictable(struct address_space *mapping)
 {
 	set_bit(AS_UNEVICTABLE, &mapping->flags);
@@ -55,14 +51,6 @@ static inline int mapping_unevictable(struct address_space *mapping)
 		return test_bit(AS_UNEVICTABLE, &mapping->flags);
 	return !!mapping;
 }
-#else
-static inline void mapping_set_unevictable(struct address_space *mapping) { }
-static inline void mapping_clear_unevictable(struct address_space *mapping) { }
-static inline int mapping_unevictable(struct address_space *mapping)
-{
-	return 0;
-}
-#endif
 
 static inline gfp_t mapping_gfp_mask(struct address_space * mapping)
 {
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 72698d89e76..8e366bb0705 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -124,6 +124,14 @@ typedef int __bitwise pci_power_t;
 #define PCI_UNKNOWN	((pci_power_t __force) 5)
 #define PCI_POWER_ERROR	((pci_power_t __force) -1)
 
+/* Remember to update this when the list above changes! */
+extern const char *pci_power_names[];
+
+static inline const char *pci_power_name(pci_power_t state)
+{
+	return pci_power_names[1 + (int) state];
+}
+
 #define PCI_PM_D2_DELAY	200
 #define PCI_PM_D3_WAIT	10
 #define PCI_PM_BUS_WAIT	50
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 19f8e6d1a4d..a3b00036579 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -104,6 +104,7 @@
 #define PCI_CLASS_SERIAL_USB_UHCI	0x0c0300
 #define PCI_CLASS_SERIAL_USB_OHCI	0x0c0310
 #define PCI_CLASS_SERIAL_USB_EHCI	0x0c0320
+#define PCI_CLASS_SERIAL_USB_XHCI	0x0c0330
 #define PCI_CLASS_SERIAL_FIBER		0x0c04
 #define PCI_CLASS_SERIAL_SMBUS		0x0c05
 
@@ -1067,8 +1068,6 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS	0x0034
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE	0x0035
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA	0x0036
-#define PCI_DEVICE_ID_NVIDIA_NVENET_10		0x0037
-#define PCI_DEVICE_ID_NVIDIA_NVENET_11		0x0038
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2	0x003e
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800       0x0041
@@ -1079,21 +1078,16 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE	0x0053
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA	0x0054
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2	0x0055
-#define PCI_DEVICE_ID_NVIDIA_NVENET_8		0x0056
-#define PCI_DEVICE_ID_NVIDIA_NVENET_9		0x0057
 #define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO	0x0059
 #define PCI_DEVICE_ID_NVIDIA_CK804_PCIE		0x005d
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS	0x0064
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE	0x0065
-#define PCI_DEVICE_ID_NVIDIA_NVENET_2		0x0066
 #define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM		0x0069
 #define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO		0x006a
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS	0x0084
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE	0x0085
-#define PCI_DEVICE_ID_NVIDIA_NVENET_4		0x0086
 #define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM	0x0089
 #define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO		0x008a
-#define PCI_DEVICE_ID_NVIDIA_NVENET_5		0x008c
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA	0x008e
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT   0x0090
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX	0x0091
@@ -1109,15 +1103,12 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3		0x00d1
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS	0x00d4
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE	0x00d5
-#define PCI_DEVICE_ID_NVIDIA_NVENET_3		0x00d6
 #define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM		0x00d9
 #define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
-#define PCI_DEVICE_ID_NVIDIA_NVENET_7		0x00df
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S		0x00e1
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA	0x00e3
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS	0x00e4
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE	0x00e5
-#define PCI_DEVICE_ID_NVIDIA_NVENET_6		0x00e6
 #define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO		0x00ea
 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2	0x00ee
 #define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0
@@ -1177,7 +1168,6 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS	0x01b4
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE		0x01bc
 #define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM		0x01c1
-#define PCI_DEVICE_ID_NVIDIA_NVENET_1		0x01c3
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2		0x01e0
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE3		0x0200
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1		0x0201
@@ -1200,8 +1190,6 @@
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE	0x036E
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA	0x037E
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2	0x037F
-#define PCI_DEVICE_ID_NVIDIA_NVENET_12		0x0268
-#define PCI_DEVICE_ID_NVIDIA_NVENET_13		0x0269
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282
@@ -1248,46 +1236,21 @@
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2    0x0348
 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000       0x034C
 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100         0x034E
-#define PCI_DEVICE_ID_NVIDIA_NVENET_14              0x0372
 #define PCI_DEVICE_ID_NVIDIA_NVENET_15              0x0373
-#define PCI_DEVICE_ID_NVIDIA_NVENET_16              0x03E5
-#define PCI_DEVICE_ID_NVIDIA_NVENET_17              0x03E6
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA      0x03E7
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS	    0x03EB
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE       0x03EC
-#define PCI_DEVICE_ID_NVIDIA_NVENET_18              0x03EE
-#define PCI_DEVICE_ID_NVIDIA_NVENET_19              0x03EF
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2     0x03F6
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3     0x03F7
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS	    0x0446
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE	    0x0448
-#define PCI_DEVICE_ID_NVIDIA_NVENET_20              0x0450
-#define PCI_DEVICE_ID_NVIDIA_NVENET_21              0x0451
-#define PCI_DEVICE_ID_NVIDIA_NVENET_22              0x0452
-#define PCI_DEVICE_ID_NVIDIA_NVENET_23              0x0453
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS     0x0542
-#define PCI_DEVICE_ID_NVIDIA_NVENET_24              0x054C
-#define PCI_DEVICE_ID_NVIDIA_NVENET_25              0x054D
-#define PCI_DEVICE_ID_NVIDIA_NVENET_26              0x054E
-#define PCI_DEVICE_ID_NVIDIA_NVENET_27              0x054F
-#define PCI_DEVICE_ID_NVIDIA_NVENET_28              0x07DC
-#define PCI_DEVICE_ID_NVIDIA_NVENET_29              0x07DD
-#define PCI_DEVICE_ID_NVIDIA_NVENET_30              0x07DE
-#define PCI_DEVICE_ID_NVIDIA_NVENET_31              0x07DF
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE       0x0560
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE       0x056C
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS    0x0752
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE       0x0759
-#define PCI_DEVICE_ID_NVIDIA_NVENET_32              0x0760
-#define PCI_DEVICE_ID_NVIDIA_NVENET_33              0x0761
-#define PCI_DEVICE_ID_NVIDIA_NVENET_34              0x0762
-#define PCI_DEVICE_ID_NVIDIA_NVENET_35              0x0763
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS     0x07D8
 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS     0x0AA2
-#define PCI_DEVICE_ID_NVIDIA_NVENET_36              0x0AB0
-#define PCI_DEVICE_ID_NVIDIA_NVENET_37              0x0AB1
-#define PCI_DEVICE_ID_NVIDIA_NVENET_38              0x0AB2
-#define PCI_DEVICE_ID_NVIDIA_NVENET_39              0x0AB3
 
 #define PCI_VENDOR_ID_IMS		0x10e0
 #define PCI_DEVICE_ID_IMS_TT128		0x9128
@@ -1926,6 +1889,8 @@
 #define PCI_SUBDEVICE_ID_CCD_SWYX4S	0xB540
 #define PCI_SUBDEVICE_ID_CCD_JH4S20	0xB550
 #define PCI_SUBDEVICE_ID_CCD_IOB8ST_1	0xB552
+#define PCI_SUBDEVICE_ID_CCD_JHSE1	0xB553
+#define PCI_SUBDEVICE_ID_CCD_JH8S	0xB55B
 #define PCI_SUBDEVICE_ID_CCD_BN4S	0xB560
 #define PCI_SUBDEVICE_ID_CCD_BN8S	0xB562
 #define PCI_SUBDEVICE_ID_CCD_BNE1	0xB563
@@ -2127,6 +2092,7 @@
 #define PCI_VENDOR_ID_MAINPINE		0x1522
 #define PCI_DEVICE_ID_MAINPINE_PBRIDGE	0x0100
 #define PCI_VENDOR_ID_ENE		0x1524
+#define PCI_DEVICE_ID_ENE_CB710_FLASH	0x0510
 #define PCI_DEVICE_ID_ENE_CB712_SD	0x0550
 #define PCI_DEVICE_ID_ENE_CB712_SD_2	0x0551
 #define PCI_DEVICE_ID_ENE_CB714_SD	0x0750
@@ -2288,6 +2254,8 @@
 #define PCI_DEVICE_ID_MPC8547E		0x0018
 #define PCI_DEVICE_ID_MPC8545E		0x0019
 #define PCI_DEVICE_ID_MPC8545		0x001a
+#define PCI_DEVICE_ID_MPC8569E		0x0061
+#define PCI_DEVICE_ID_MPC8569		0x0060
 #define PCI_DEVICE_ID_MPC8568E		0x0020
 #define PCI_DEVICE_ID_MPC8568		0x0021
 #define PCI_DEVICE_ID_MPC8567E		0x0022
@@ -2300,6 +2268,8 @@
 #define PCI_DEVICE_ID_MPC8572		0x0041
 #define PCI_DEVICE_ID_MPC8536E		0x0050
 #define PCI_DEVICE_ID_MPC8536		0x0051
+#define PCI_DEVICE_ID_P2020E		0x0070
+#define PCI_DEVICE_ID_P2020		0x0071
 #define PCI_DEVICE_ID_MPC8641		0x7010
 #define PCI_DEVICE_ID_MPC8641D		0x7011
 #define PCI_DEVICE_ID_MPC8610		0x7018
@@ -2327,6 +2297,8 @@
 
 #define PCI_VENDOR_ID_QMI		0x1a32
 
+#define PCI_VENDOR_ID_AZWAVE		0x1a3b
+
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 97e40cb6b58..b1368b8f657 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -79,7 +79,7 @@ typedef enum {
  * Need to be a little smaller than phydev->dev.bus_id to leave room
  * for the ":%02x"
  */
-#define MII_BUS_ID_SIZE	(BUS_ID_SIZE - 3)
+#define MII_BUS_ID_SIZE	(20 - 3)
 
 /*
  * The Bus class for PHYs.  Devices which provide access to
@@ -407,7 +407,7 @@ struct phy_driver {
 /* A Structure for boards to register fixups with the PHY Lib */
 struct phy_fixup {
 	struct list_head list;
-	char bus_id[BUS_ID_SIZE];
+	char bus_id[20];
 	u32 phy_uid;
 	u32 phy_uid_mask;
 	int (*run)(struct phy_device *phydev);
@@ -444,10 +444,16 @@ static inline int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
 
 int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
 struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
+int phy_device_register(struct phy_device *phy);
 int phy_clear_interrupt(struct phy_device *phydev);
 int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+		u32 flags, phy_interface_t interface);
 struct phy_device * phy_attach(struct net_device *dev,
 		const char *bus_id, u32 flags, phy_interface_t interface);
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+		void (*handler)(struct net_device *), u32 flags,
+		phy_interface_t interface);
 struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
 		void (*handler)(struct net_device *), u32 flags,
 		phy_interface_t interface);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index b67bb5d7b22..8dc5123b630 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -36,8 +36,8 @@ extern struct device platform_bus;
 
 extern struct resource *platform_get_resource(struct platform_device *, unsigned int, unsigned int);
 extern int platform_get_irq(struct platform_device *, unsigned int);
-extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, char *);
-extern int platform_get_irq_byname(struct platform_device *, char *);
+extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, const char *);
+extern int platform_get_irq_byname(struct platform_device *, const char *);
 extern int platform_add_devices(struct platform_device **, int);
 
 extern struct platform_device *platform_device_register_simple(const char *, int id,
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 8c24ef8d997..fa287f25138 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -32,6 +32,7 @@ typedef void (*poll_queue_proc)(struct file *, wait_queue_head_t *, struct poll_
 
 typedef struct poll_table_struct {
 	poll_queue_proc qproc;
+	unsigned long key;
 } poll_table;
 
 static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p)
@@ -43,10 +44,12 @@ static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_addres
 static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc)
 {
 	pt->qproc = qproc;
+	pt->key   = ~0UL; /* all events enabled */
 }
 
 struct poll_table_entry {
 	struct file *filp;
+	unsigned long key;
 	wait_queue_t wait;
 	wait_queue_head_t *wait_address;
 };
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index 355f6e80db0..c5da7491809 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -167,6 +167,8 @@ radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results,
 			unsigned long first_index, unsigned int max_items);
 unsigned long radix_tree_next_hole(struct radix_tree_root *root,
 				unsigned long index, unsigned long max_scan);
+unsigned long radix_tree_prev_hole(struct radix_tree_root *root,
+				unsigned long index, unsigned long max_scan);
 int radix_tree_preload(gfp_t gfp_mask);
 void radix_tree_init(void);
 void *radix_tree_tag_set(struct radix_tree_root *root,
diff --git a/include/linux/regulator/lp3971.h b/include/linux/regulator/lp3971.h
new file mode 100644
index 00000000000..61401649fe7
--- /dev/null
+++ b/include/linux/regulator/lp3971.h
@@ -0,0 +1,51 @@
+/*
+ * National Semiconductors LP3971 PMIC chip client interface
+ *
+ *  Copyright (C) 2009 Samsung Electronics
+ *  Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Based on wm8400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_REGULATOR_LP3971_H
+#define __LINUX_REGULATOR_LP3971_H
+
+#include <linux/regulator/machine.h>
+
+#define LP3971_LDO1  0
+#define LP3971_LDO2  1
+#define LP3971_LDO3  2
+#define LP3971_LDO4  3
+#define LP3971_LDO5  4
+
+#define LP3971_DCDC1 5
+#define LP3971_DCDC2 6
+#define LP3971_DCDC3 7
+
+#define LP3971_NUM_REGULATORS 8
+
+struct lp3971_regulator_subdev {
+	int id;
+	struct regulator_init_data *initdata;
+};
+
+struct lp3971_platform_data {
+	int num_regulators;
+	struct lp3971_regulator_subdev *regulators;
+};
+
+#endif
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
new file mode 100644
index 00000000000..44563192bf1
--- /dev/null
+++ b/include/linux/regulator/max1586.h
@@ -0,0 +1,63 @@
+/*
+ * max1586.h  --  Voltage regulation for the Maxim 1586
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef REGULATOR_MAX1586
+#define REGULATOR_MAX1586
+
+#include <linux/regulator/machine.h>
+
+#define MAX1586_V3 0
+#define MAX1586_V6 1
+
+/* precalculated values for v3_gain */
+#define MAX1586_GAIN_NO_R24   1000000  /* 700000 .. 1475000 mV */
+#define MAX1586_GAIN_R24_3k32 1051098  /* 735768 .. 1550369 mV */
+#define MAX1586_GAIN_R24_5k11 1078648  /* 755053 .. 1591005 mV */
+#define MAX1586_GAIN_R24_7k5  1115432  /* 780802 .. 1645262 mV */
+
+/**
+ * max1586_subdev_data - regulator data
+ * @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
+ * @name: regulator cute name (example for V3: "vcc_core")
+ * @platform_data: regulator init data (contraints, supplies, ...)
+ */
+struct max1586_subdev_data {
+	int				id;
+	char				*name;
+	struct regulator_init_data	*platform_data;
+};
+
+/**
+ * max1586_platform_data - platform data for max1586
+ * @num_subdevs: number of regultors used (may be 1 or 2)
+ * @subdevs: regulator used
+ *           At most, there will be a regulator for V3 and one for V6 voltages.
+ * @v3_gain: gain on the V3 voltage output multiplied by 1e6.
+ *           This can be calculated as ((1 + R24/R25 + R24/185.5kOhm) * 1e6)
+ *           for an external resistor configuration as described in the
+ *           data sheet (R25=100kOhm).
+ */
+struct max1586_platform_data {
+	int num_subdevs;
+	struct max1586_subdev_data *subdevs;
+	int v3_gain;
+};
+
+#endif
diff --git a/include/linux/regulator/userspace-consumer.h b/include/linux/regulator/userspace-consumer.h
new file mode 100644
index 00000000000..b4554ce9d4b
--- /dev/null
+++ b/include/linux/regulator/userspace-consumer.h
@@ -0,0 +1,25 @@
+#ifndef __REGULATOR_PLATFORM_CONSUMER_H_
+#define __REGULATOR_PLATFORM_CONSUMER_H_
+
+struct regulator_consumer_supply;
+
+/**
+ * struct regulator_userspace_consumer_data - line consumer
+ * initialisation data.
+ *
+ * @name: Name for the consumer line
+ * @num_supplies: Number of supplies feeding the line
+ * @supplies: Supplies configuration.
+ * @init_on: Set if the regulators supplying the line should be
+ *           enabled during initialisation
+ */
+struct regulator_userspace_consumer_data {
+	const char *name;
+
+	int num_supplies;
+	struct regulator_bulk_data *supplies;
+
+	bool init_on;
+};
+
+#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 164332cbb77..16e39c7a67f 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -4,6 +4,7 @@
 /*
  * Copyright (C) 2006 - 2007 Ivo van Doorn
  * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,131 +23,331 @@
  */
 
 #include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/leds.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED	0
+#define RFKILL_STATE_UNBLOCKED		1
+#define RFKILL_STATE_HARD_BLOCKED	2
 
 /**
  * enum rfkill_type - type of rfkill switch.
- * RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
- * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
- * RFKILL_TYPE_UWB: switch is on a ultra wideband device.
- * RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
- * RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (userspace only)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
  */
 enum rfkill_type {
-	RFKILL_TYPE_WLAN ,
+	RFKILL_TYPE_ALL = 0,
+	RFKILL_TYPE_WLAN,
 	RFKILL_TYPE_BLUETOOTH,
 	RFKILL_TYPE_UWB,
 	RFKILL_TYPE_WIMAX,
 	RFKILL_TYPE_WWAN,
-	RFKILL_TYPE_MAX,
+	NUM_RFKILL_TYPES,
 };
 
-enum rfkill_state {
-	RFKILL_STATE_SOFT_BLOCKED = 0,	/* Radio output blocked */
-	RFKILL_STATE_UNBLOCKED    = 1,	/* Radio output allowed */
-	RFKILL_STATE_HARD_BLOCKED = 2,	/* Output blocked, non-overrideable */
-	RFKILL_STATE_MAX,		/* marker for last valid state */
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+	RFKILL_OP_ADD = 0,
+	RFKILL_OP_DEL,
+	RFKILL_OP_CHANGE,
+	RFKILL_OP_CHANGE_ALL,
 };
 
-/*
- * These are DEPRECATED, drivers using them should be verified to
- * comply with the rfkill usage guidelines in Documentation/rfkill.txt
- * and then converted to use the new names for rfkill_state
- */
-#define RFKILL_STATE_OFF RFKILL_STATE_SOFT_BLOCKED
-#define RFKILL_STATE_ON  RFKILL_STATE_UNBLOCKED
-
-/**
- * struct rfkill - rfkill control structure.
- * @name: Name of the switch.
- * @type: Radio type which the button controls, the value stored
- *	here should be a value from enum rfkill_type.
- * @state: State of the switch, "UNBLOCKED" means radio can operate.
- * @user_claim_unsupported: Whether the hardware supports exclusive
- *	RF-kill control by userspace. Set this before registering.
- * @user_claim: Set when the switch is controlled exlusively by userspace.
- * @mutex: Guards switch state transitions.  It serializes callbacks
- *	and also protects the state.
- * @data: Pointer to the RF button drivers private data which will be
- *	passed along when toggling radio state.
- * @toggle_radio(): Mandatory handler to control state of the radio.
- *	only RFKILL_STATE_SOFT_BLOCKED and RFKILL_STATE_UNBLOCKED are
- *	valid parameters.
- * @get_state(): handler to read current radio state from hardware,
- *      may be called from atomic context, should return 0 on success.
- *      Either this handler OR judicious use of rfkill_force_state() is
- *      MANDATORY for any driver capable of RFKILL_STATE_HARD_BLOCKED.
- * @led_trigger: A LED trigger for this button's LED.
- * @dev: Device structure integrating the switch into device tree.
- * @node: Used to place switch into list of all switches known to the
- *	the system.
- *
- * This structure represents a RF switch located on a network device.
- */
-struct rfkill {
-	const char *name;
-	enum rfkill_type type;
-
-	bool user_claim_unsupported;
-	bool user_claim;
-
-	/* the mutex serializes callbacks and also protects
-	 * the state */
-	struct mutex mutex;
-	enum rfkill_state state;
-	void *data;
-	int (*toggle_radio)(void *data, enum rfkill_state state);
-	int (*get_state)(void *data, enum rfkill_state *state);
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft, hard;
+} __packed;
 
-#ifdef CONFIG_RFKILL_LEDS
-	struct led_trigger led_trigger;
-#endif
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC	'R'
+#define RFKILL_IOC_NOINPUT	1
+#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+#ifdef __KERNEL__
+/* don't allow anyone to use these in the kernel */
+enum rfkill_user_states {
+	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
+	RFKILL_USER_STATE_UNBLOCKED	= RFKILL_STATE_UNBLOCKED,
+	RFKILL_USER_STATE_HARD_BLOCKED	= RFKILL_STATE_HARD_BLOCKED,
+};
+#undef RFKILL_STATE_SOFT_BLOCKED
+#undef RFKILL_STATE_UNBLOCKED
+#undef RFKILL_STATE_HARD_BLOCKED
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+/* this is opaque */
+struct rfkill;
 
-	struct device dev;
-	struct list_head node;
-	enum rfkill_state state_for_resume;
+/**
+ * struct rfkill_ops - rfkill driver methods
+ *
+ * @poll: poll the rfkill block state(s) -- only assign this method
+ *	when you need polling. When called, simply call one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. If the hw
+ *	is getting unblocked you need to take into account the return
+ *	value of those functions to make sure the software block is
+ *	properly used.
+ * @query: query the rfkill block state(s) and call exactly one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. Assign this
+ *	method if input events can cause hardware state changes to make
+ *	the rfkill core query your driver before setting a requested
+ *	block.
+ * @set_block: turn the transmitter on (blocked == false) or off
+ *	(blocked == true) -- ignore and return 0 when hard blocked.
+ *	This callback must be assigned.
+ */
+struct rfkill_ops {
+	void	(*poll)(struct rfkill *rfkill, void *data);
+	void	(*query)(struct rfkill *rfkill, void *data);
+	int	(*set_block)(void *data, bool blocked);
 };
-#define to_rfkill(d)	container_of(d, struct rfkill, dev)
 
-struct rfkill * __must_check rfkill_allocate(struct device *parent,
-					     enum rfkill_type type);
-void rfkill_free(struct rfkill *rfkill);
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+/**
+ * rfkill_alloc - allocate rfkill structure
+ * @name: name of the struct -- the string is not copied internally
+ * @parent: device that has rf switch on it
+ * @type: type of the switch (RFKILL_TYPE_*)
+ * @ops: rfkill methods
+ * @ops_data: data passed to each method
+ *
+ * This function should be called by the transmitter driver to allocate an
+ * rfkill structure. Returns %NULL on failure.
+ */
+struct rfkill * __must_check rfkill_alloc(const char *name,
+					  struct device *parent,
+					  const enum rfkill_type type,
+					  const struct rfkill_ops *ops,
+					  void *ops_data);
+
+/**
+ * rfkill_register - Register a rfkill structure.
+ * @rfkill: rfkill structure to be registered
+ *
+ * This function should be called by the transmitter driver to register
+ * the rfkill structure. Before calling this function the driver needs
+ * to be ready to service method calls from rfkill.
+ *
+ * If the software blocked state is not set before registration,
+ * set_block will be called to initialize it to a default value.
+ *
+ * If the hardware blocked state is not set before registration,
+ * it is assumed to be unblocked.
+ */
 int __must_check rfkill_register(struct rfkill *rfkill);
+
+/**
+ * rfkill_pause_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_pause_polling(struct rfkill *rfkill);
+
+/**
+ * rfkill_resume_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_resume_polling(struct rfkill *rfkill);
+
+
+/**
+ * rfkill_unregister - Unregister a rfkill structure.
+ * @rfkill: rfkill structure to be unregistered
+ *
+ * This function should be called by the network driver during device
+ * teardown to destroy rfkill structure. Until it returns, the driver
+ * needs to be able to service method calls.
+ */
 void rfkill_unregister(struct rfkill *rfkill);
 
-int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state);
-int rfkill_set_default(enum rfkill_type type, enum rfkill_state state);
+/**
+ * rfkill_destroy - free rfkill structure
+ * @rfkill: rfkill structure to be destroyed
+ *
+ * Destroys the rfkill structure.
+ */
+void rfkill_destroy(struct rfkill *rfkill);
+
+/**
+ * rfkill_set_hw_state - Set the internal rfkill hardware block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current hardware block state to set
+ *
+ * rfkill drivers that get events when the hard-blocked state changes
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.  They should also use this after
+ * resume if the state could have changed.
+ *
+ * You need not (but may) call this function if poll_state is assigned.
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked) so that drivers need not keep track of the soft
+ * block state -- which they might not be able to.
+ */
+bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_sw_state - Set the internal rfkill software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that get events when the soft-blocked state changes
+ * (yes, some platforms directly act on input but allow changing again)
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.  It is not necessary to notify on
+ * resume; since hibernation can always change the soft-blocked state,
+ * the rfkill core will unconditionally restore the previous state.
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked).
+ */
+bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_states - Set the internal rfkill block states
+ * @rfkill: pointer to the rfkill class to modify.
+ * @sw: the current software block state to set
+ * @hw: the current hardware block state to set
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ */
+void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw);
 
 /**
- * rfkill_state_complement - return complementar state
- * @state: state to return the complement of
+ * rfkill_blocked - query rfkill block
  *
- * Returns RFKILL_STATE_SOFT_BLOCKED if @state is RFKILL_STATE_UNBLOCKED,
- * returns RFKILL_STATE_UNBLOCKED otherwise.
+ * @rfkill: rfkill struct to query
  */
-static inline enum rfkill_state rfkill_state_complement(enum rfkill_state state)
+bool rfkill_blocked(struct rfkill *rfkill);
+#else /* !RFKILL */
+static inline struct rfkill * __must_check
+rfkill_alloc(const char *name,
+	     struct device *parent,
+	     const enum rfkill_type type,
+	     const struct rfkill_ops *ops,
+	     void *ops_data)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int __must_check rfkill_register(struct rfkill *rfkill)
+{
+	if (rfkill == ERR_PTR(-ENODEV))
+		return 0;
+	return -EINVAL;
+}
+
+static inline void rfkill_pause_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_resume_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_unregister(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_destroy(struct rfkill *rfkill)
+{
+}
+
+static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked)
+{
+	return blocked;
+}
+
+static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
 {
-	return (state == RFKILL_STATE_UNBLOCKED) ?
-		RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED;
+	return blocked;
 }
 
+static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
+{
+}
+
+static inline bool rfkill_blocked(struct rfkill *rfkill)
+{
+	return false;
+}
+#endif /* RFKILL || RFKILL_MODULE */
+
+
+#ifdef CONFIG_RFKILL_LEDS
 /**
- * rfkill_get_led_name - Get the LED trigger name for the button's LED.
+ * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED.
  * This function might return a NULL pointer if registering of the
- * LED trigger failed.
- * Use this as "default_trigger" for the LED.
+ * LED trigger failed. Use this as "default_trigger" for the LED.
  */
-static inline char *rfkill_get_led_name(struct rfkill *rfkill)
-{
-#ifdef CONFIG_RFKILL_LEDS
-	return (char *)(rfkill->led_trigger.name);
+const char *rfkill_get_led_trigger_name(struct rfkill *rfkill);
+
+/**
+ * rfkill_set_led_trigger_name -- set the LED trigger name
+ * @rfkill: rfkill struct
+ * @name: LED trigger name
+ *
+ * This function sets the LED trigger name of the radio LED
+ * trigger that rfkill creates. It is optional, but if called
+ * must be called before rfkill_register() to be effective.
+ */
+void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name);
 #else
+static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill)
+{
 	return NULL;
-#endif
 }
 
+static inline void
+rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
+{
+}
+#endif
+
+#endif /* __KERNEL__ */
+
 #endif /* RFKILL_H */
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 8670f1575fe..29f8599e6be 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_RING_BUFFER_H
 #define _LINUX_RING_BUFFER_H
 
+#include <linux/kmemcheck.h>
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 
@@ -11,7 +12,10 @@ struct ring_buffer_iter;
  * Don't refer to this struct directly, use functions below.
  */
 struct ring_buffer_event {
+	kmemcheck_bitfield_begin(bitfield);
 	u32		type_len:5, time_delta:27;
+	kmemcheck_bitfield_end(bitfield);
+
 	u32		array[];
 };
 
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index b35bc0e19cd..216d024f830 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -83,7 +83,8 @@ static inline void page_dup_rmap(struct page *page, struct vm_area_struct *vma,
 /*
  * Called from mm/vmscan.c to handle paging out
  */
-int page_referenced(struct page *, int is_locked, struct mem_cgroup *cnt);
+int page_referenced(struct page *, int is_locked,
+			struct mem_cgroup *cnt, unsigned long *vm_flags);
 int try_to_unmap(struct page *, int ignore_refs);
 
 /*
@@ -105,18 +106,11 @@ unsigned long page_address_in_vma(struct page *, struct vm_area_struct *);
  */
 int page_mkclean(struct page *);
 
-#ifdef CONFIG_UNEVICTABLE_LRU
 /*
  * called in munlock()/munmap() path to check for other vmas holding
  * the page mlocked.
  */
 int try_to_munlock(struct page *);
-#else
-static inline int try_to_munlock(struct page *page)
-{
-	return 0;	/* a.k.a. SWAP_SUCCESS */
-}
-#endif
 
 #else	/* !CONFIG_MMU */
 
@@ -124,7 +118,7 @@ static inline int try_to_munlock(struct page *page)
 #define anon_vma_prepare(vma)	(0)
 #define anon_vma_link(vma)	do {} while (0)
 
-#define page_referenced(page,l,cnt) TestClearPageReferenced(page)
+#define page_referenced(page, locked, cnt, flags) TestClearPageReferenced(page)
 #define try_to_unmap(page, refs) SWAP_FAIL
 
 static inline int page_mkclean(struct page *page)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4896fdfec91..02042e7f219 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -261,6 +261,7 @@ extern void task_rq_unlock_wait(struct task_struct *p);
 extern cpumask_var_t nohz_cpu_mask;
 #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
 extern int select_nohz_load_balancer(int cpu);
+extern int get_nohz_load_balancer(void);
 #else
 static inline int select_nohz_load_balancer(int cpu)
 {
@@ -673,7 +674,7 @@ struct user_struct {
 	struct task_group *tg;
 #ifdef CONFIG_SYSFS
 	struct kobject kobj;
-	struct work_struct work;
+	struct delayed_work work;
 #endif
 #endif
 
@@ -1177,7 +1178,6 @@ struct task_struct {
 	 * a short time
 	 */
 	unsigned char fpu_counter;
-	s8 oomkilladj; /* OOM kill score adjustment (bit shift). */
 #ifdef CONFIG_BLK_DEV_IO_TRACE
 	unsigned int btrace_seq;
 #endif
@@ -1317,7 +1317,8 @@ struct task_struct {
 /* Thread group tracking */
    	u32 parent_exec_id;
    	u32 self_exec_id;
-/* Protection of (de-)allocation: mm, files, fs, tty, keyrings */
+/* Protection of (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed,
+ * mempolicy */
 	spinlock_t alloc_lock;
 
 #ifdef CONFIG_GENERIC_HARDIRQS
@@ -1385,8 +1386,7 @@ struct task_struct {
 	cputime_t acct_timexpd;	/* stime + utime since last update */
 #endif
 #ifdef CONFIG_CPUSETS
-	nodemask_t mems_allowed;
-	int cpuset_mems_generation;
+	nodemask_t mems_allowed;	/* Protected by alloc_lock */
 	int cpuset_mem_spread_rotor;
 #endif
 #ifdef CONFIG_CGROUPS
@@ -1409,7 +1409,7 @@ struct task_struct {
 	struct list_head perf_counter_list;
 #endif
 #ifdef CONFIG_NUMA
-	struct mempolicy *mempolicy;
+	struct mempolicy *mempolicy;	/* Protected by alloc_lock */
 	short il_next;
 #endif
 	atomic_t fs_excl;	/* holding fs exclusive resources */
@@ -1796,11 +1796,23 @@ extern unsigned int sysctl_sched_child_runs_first;
 extern unsigned int sysctl_sched_features;
 extern unsigned int sysctl_sched_migration_cost;
 extern unsigned int sysctl_sched_nr_migrate;
+extern unsigned int sysctl_timer_migration;
 
 int sched_nr_latency_handler(struct ctl_table *table, int write,
 		struct file *file, void __user *buffer, size_t *length,
 		loff_t *ppos);
 #endif
+#ifdef CONFIG_SCHED_DEBUG
+static inline unsigned int get_sysctl_timer_migration(void)
+{
+	return sysctl_timer_migration;
+}
+#else
+static inline unsigned int get_sysctl_timer_migration(void)
+{
+	return 1;
+}
+#endif
 extern unsigned int sysctl_sched_rt_period;
 extern int sysctl_sched_rt_runtime;
 
@@ -2212,6 +2224,12 @@ static inline int test_tsk_need_resched(struct task_struct *tsk)
 	return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED));
 }
 
+static inline int restart_syscall(void)
+{
+	set_tsk_thread_flag(current, TIF_SIGPENDING);
+	return -ERESTARTNOINTR;
+}
+
 static inline int signal_pending(struct task_struct *p)
 {
 	return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index c2731bfe04d..b464b9d3d24 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -487,17 +487,17 @@ typedef enum {
 	 *
 	 * Value          Cause Code
 	 * ---------      ----------------
-	 * 0x0100          Request to Delete Last Remaining IP Address.
-	 * 0x0101          Operation Refused Due to Resource Shortage.
-	 * 0x0102          Request to Delete Source IP Address.
-	 * 0x0103          Association Aborted due to illegal ASCONF-ACK
-	 * 0x0104          Request refused - no authorization.
+	 * 0x00A0          Request to Delete Last Remaining IP Address.
+	 * 0x00A1          Operation Refused Due to Resource Shortage.
+	 * 0x00A2          Request to Delete Source IP Address.
+	 * 0x00A3          Association Aborted due to illegal ASCONF-ACK
+	 * 0x00A4          Request refused - no authorization.
 	 */
-	SCTP_ERROR_DEL_LAST_IP	= cpu_to_be16(0x0100),
-	SCTP_ERROR_RSRC_LOW	= cpu_to_be16(0x0101),
-	SCTP_ERROR_DEL_SRC_IP	= cpu_to_be16(0x0102),
-	SCTP_ERROR_ASCONF_ACK   = cpu_to_be16(0x0103),
-	SCTP_ERROR_REQ_REFUSED	= cpu_to_be16(0x0104),
+	SCTP_ERROR_DEL_LAST_IP	= cpu_to_be16(0x00A0),
+	SCTP_ERROR_RSRC_LOW	= cpu_to_be16(0x00A1),
+	SCTP_ERROR_DEL_SRC_IP	= cpu_to_be16(0x00A2),
+	SCTP_ERROR_ASCONF_ACK   = cpu_to_be16(0x00A3),
+	SCTP_ERROR_REQ_REFUSED	= cpu_to_be16(0x00A4),
 
 	/* AUTH Section 4.  New Error Cause
 	 *
diff --git a/include/linux/section-names.h b/include/linux/section-names.h
deleted file mode 100644
index c956f4eb2ad..00000000000
--- a/include/linux/section-names.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_SECTION_NAMES_H
-#define __LINUX_SECTION_NAMES_H
-
-#define HEAD_TEXT_SECTION .head.text
-
-#endif /* !__LINUX_SECTION_NAMES_H */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 5fd389162f0..63ef24bc01d 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -15,6 +15,7 @@
 #define _LINUX_SKBUFF_H
 
 #include <linux/kernel.h>
+#include <linux/kmemcheck.h>
 #include <linux/compiler.h>
 #include <linux/time.h>
 #include <linux/cache.h>
@@ -189,20 +190,23 @@ struct skb_shared_info {
 	atomic_t	dataref;
 	unsigned short	nr_frags;
 	unsigned short	gso_size;
+#ifdef CONFIG_HAS_DMA
+	dma_addr_t	dma_head;
+#endif
 	/* Warning: this field is not always filled in (UFO)! */
 	unsigned short	gso_segs;
 	unsigned short  gso_type;
 	__be32          ip6_frag_id;
 	union skb_shared_tx tx_flags;
-#ifdef CONFIG_HAS_DMA
-	unsigned int	num_dma_maps;
-#endif
 	struct sk_buff	*frag_list;
 	struct skb_shared_hwtstamps hwtstamps;
 	skb_frag_t	frags[MAX_SKB_FRAGS];
 #ifdef CONFIG_HAS_DMA
-	dma_addr_t	dma_maps[MAX_SKB_FRAGS + 1];
+	dma_addr_t	dma_maps[MAX_SKB_FRAGS];
 #endif
+	/* Intermediate layers must ensure that destructor_arg
+	 * remains valid until skb destructor */
+	void *		destructor_arg;
 };
 
 /* We divide dataref into two halves.  The higher 16 bits hold references
@@ -301,9 +305,6 @@ typedef unsigned char *sk_buff_data_t;
  *	@tc_verd: traffic control verdict
  *	@ndisc_nodetype: router type (from link layer)
  *	@do_not_encrypt: set to prevent encryption of this frame
- *	@requeue: set to indicate that the wireless core should attempt
- *		a software retry on this frame if we failed to
- *		receive an ACK for it
  *	@dma_cookie: a cookie to one of several possible DMA operations
  *		done by skb DMA functions
  *	@secmark: security marking
@@ -319,10 +320,7 @@ struct sk_buff {
 	ktime_t			tstamp;
 	struct net_device	*dev;
 
-	union {
-		struct  dst_entry	*dst;
-		struct  rtable		*rtable;
-	};
+	unsigned long		_skb_dst;
 #ifdef CONFIG_XFRM
 	struct	sec_path	*sp;
 #endif
@@ -346,6 +344,7 @@ struct sk_buff {
 		};
 	};
 	__u32			priority;
+	kmemcheck_bitfield_begin(flags1);
 	__u8			local_df:1,
 				cloned:1,
 				ip_summed:2,
@@ -356,6 +355,7 @@ struct sk_buff {
 				ipvs_property:1,
 				peeked:1,
 				nf_trace:1;
+	kmemcheck_bitfield_end(flags1);
 	__be16			protocol;
 
 	void			(*destructor)(struct sk_buff *skb);
@@ -375,13 +375,16 @@ struct sk_buff {
 	__u16			tc_verd;	/* traffic control verdict */
 #endif
 #endif
+
+	kmemcheck_bitfield_begin(flags2);
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	__u8			ndisc_nodetype:2;
 #endif
 #if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
 	__u8			do_not_encrypt:1;
-	__u8			requeue:1;
 #endif
+	kmemcheck_bitfield_end(flags2);
+
 	/* 0/13/14 bit hole */
 
 #ifdef CONFIG_NET_DMA
@@ -423,6 +426,21 @@ extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb,
 			  enum dma_data_direction dir);
 #endif
 
+static inline struct dst_entry *skb_dst(const struct sk_buff *skb)
+{
+	return (struct dst_entry *)skb->_skb_dst;
+}
+
+static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)
+{
+	skb->_skb_dst = (unsigned long)dst;
+}
+
+static inline struct rtable *skb_rtable(const struct sk_buff *skb)
+{
+	return (struct rtable *)skb_dst(skb);
+}
+
 extern void kfree_skb(struct sk_buff *skb);
 extern void consume_skb(struct sk_buff *skb);
 extern void	       __kfree_skb(struct sk_buff *skb);
@@ -1062,7 +1080,7 @@ extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page,
 			    int off, int size);
 
 #define SKB_PAGE_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->nr_frags)
-#define SKB_FRAG_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->frag_list)
+#define SKB_FRAG_ASSERT(skb) 	BUG_ON(skb_has_frags(skb))
 #define SKB_LINEAR_ASSERT(skb)  BUG_ON(skb_is_nonlinear(skb))
 
 #ifdef NET_SKBUFF_DATA_USES_OFFSET
@@ -1701,6 +1719,25 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len)
 		     skb = skb->prev)
 
 
+static inline bool skb_has_frags(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->frag_list != NULL;
+}
+
+static inline void skb_frag_list_init(struct sk_buff *skb)
+{
+	skb_shinfo(skb)->frag_list = NULL;
+}
+
+static inline void skb_frag_add_head(struct sk_buff *skb, struct sk_buff *frag)
+{
+	frag->next = skb_shinfo(skb)->frag_list;
+	skb_shinfo(skb)->frag_list = frag;
+}
+
+#define skb_walk_frags(skb, iter)	\
+	for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next)
+
 extern struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags,
 					   int *peeked, int *err);
 extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags,
@@ -1715,8 +1752,14 @@ extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
 							struct iovec *iov);
 extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
 						    int offset,
-						    struct iovec *from,
+						    const struct iovec *from,
+						    int from_offset,
 						    int len);
+extern int	       skb_copy_datagram_const_iovec(const struct sk_buff *from,
+						     int offset,
+						     const struct iovec *to,
+						     int to_offset,
+						     int size);
 extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
 extern int	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
 					 unsigned int flags);
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 219b8fb4651..2da8372519f 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -64,6 +64,13 @@
 
 #define SLAB_NOLEAKTRACE	0x00800000UL	/* Avoid kmemleak tracing */
 
+/* Don't track use of uninitialized memory */
+#ifdef CONFIG_KMEMCHECK
+# define SLAB_NOTRACK		0x01000000UL
+#else
+# define SLAB_NOTRACK		0x00000000UL
+#endif
+
 /* The following flags affect the page allocator grouping pages by mobility */
 #define SLAB_RECLAIM_ACCOUNT	0x00020000UL		/* Objects are reclaimable */
 #define SLAB_TEMPORARY		SLAB_RECLAIM_ACCOUNT	/* Objects are short-lived */
diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h
index 713f841ecaa..850d057500d 100644
--- a/include/linux/slab_def.h
+++ b/include/linux/slab_def.h
@@ -16,6 +16,87 @@
 #include <linux/compiler.h>
 #include <linux/kmemtrace.h>
 
+/*
+ * struct kmem_cache
+ *
+ * manages a cache.
+ */
+
+struct kmem_cache {
+/* 1) per-cpu data, touched during every alloc/free */
+	struct array_cache *array[NR_CPUS];
+/* 2) Cache tunables. Protected by cache_chain_mutex */
+	unsigned int batchcount;
+	unsigned int limit;
+	unsigned int shared;
+
+	unsigned int buffer_size;
+	u32 reciprocal_buffer_size;
+/* 3) touched by every alloc & free from the backend */
+
+	unsigned int flags;		/* constant flags */
+	unsigned int num;		/* # of objs per slab */
+
+/* 4) cache_grow/shrink */
+	/* order of pgs per slab (2^n) */
+	unsigned int gfporder;
+
+	/* force GFP flags, e.g. GFP_DMA */
+	gfp_t gfpflags;
+
+	size_t colour;			/* cache colouring range */
+	unsigned int colour_off;	/* colour offset */
+	struct kmem_cache *slabp_cache;
+	unsigned int slab_size;
+	unsigned int dflags;		/* dynamic flags */
+
+	/* constructor func */
+	void (*ctor)(void *obj);
+
+/* 5) cache creation/removal */
+	const char *name;
+	struct list_head next;
+
+/* 6) statistics */
+#ifdef CONFIG_DEBUG_SLAB
+	unsigned long num_active;
+	unsigned long num_allocations;
+	unsigned long high_mark;
+	unsigned long grown;
+	unsigned long reaped;
+	unsigned long errors;
+	unsigned long max_freeable;
+	unsigned long node_allocs;
+	unsigned long node_frees;
+	unsigned long node_overflow;
+	atomic_t allochit;
+	atomic_t allocmiss;
+	atomic_t freehit;
+	atomic_t freemiss;
+
+	/*
+	 * If debugging is enabled, then the allocator can add additional
+	 * fields and/or padding to every object. buffer_size contains the total
+	 * object size including these internal fields, the following two
+	 * variables contain the offset to the user object and its size.
+	 */
+	int obj_offset;
+	int obj_size;
+#endif /* CONFIG_DEBUG_SLAB */
+
+	/*
+	 * We put nodelists[] at the end of kmem_cache, because we want to size
+	 * this array to nr_node_ids slots instead of MAX_NUMNODES
+	 * (see kmem_cache_init())
+	 * We still use [MAX_NUMNODES] and not [1] or [0] because cache_cache
+	 * is statically defined, so we reserve the max number of nodes.
+	 */
+	struct kmem_list3 *nodelists[MAX_NUMNODES];
+	/*
+	 * Do not add fields after nodelists[]
+	 */
+};
+
 /* Size description struct for general caches. */
 struct cache_sizes {
 	size_t		 	cs_size;
diff --git a/include/linux/smp.h b/include/linux/smp.h
index a69db820eed..9e3d8af0920 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -177,7 +177,6 @@ static inline void init_call_single_data(void)
 
 #define get_cpu()		({ preempt_disable(); smp_processor_id(); })
 #define put_cpu()		preempt_enable()
-#define put_cpu_no_resched()	preempt_enable_no_resched()
 
 /*
  * Callback to arch code if there's nosmp or maxcpus=0 on the
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index b32725075d7..5241e4fb4ec 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -47,4 +47,14 @@ struct smsc911x_platform_config {
 #define SMSC911X_FORCE_EXTERNAL_PHY 		(BIT(3))
 #define SMSC911X_SAVE_MAC_ADDRESS		(BIT(4))
 
+/*
+ * SMSC911X_SWAP_FIFO:
+ * Enables software byte swap for fifo data. Should only be used as a
+ * "last resort" in the case of big endian mode on boards with incorrectly
+ * routed data bus to older devices such as LAN9118. Newer devices such as
+ * LAN9221 can handle this in hardware, there are registers to control
+ * this swapping but the driver doesn't currently use them.
+ */
+#define SMSC911X_SWAP_FIFO			(BIT(5))
+
 #endif /* __LINUX_SMSC911X_H__ */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index aee3f1e1d1c..0f953fe4041 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -18,7 +18,7 @@
 enum
 {
 	IPSTATS_MIB_NUM = 0,
-	IPSTATS_MIB_INRECEIVES,			/* InReceives */
+	IPSTATS_MIB_INPKTS,			/* InReceives */
 	IPSTATS_MIB_INHDRERRORS,		/* InHdrErrors */
 	IPSTATS_MIB_INTOOBIGERRORS,		/* InTooBigErrors */
 	IPSTATS_MIB_INNOROUTES,			/* InNoRoutes */
@@ -28,7 +28,7 @@ enum
 	IPSTATS_MIB_INDISCARDS,			/* InDiscards */
 	IPSTATS_MIB_INDELIVERS,			/* InDelivers */
 	IPSTATS_MIB_OUTFORWDATAGRAMS,		/* OutForwDatagrams */
-	IPSTATS_MIB_OUTREQUESTS,		/* OutRequests */
+	IPSTATS_MIB_OUTPKTS,			/* OutRequests */
 	IPSTATS_MIB_OUTDISCARDS,		/* OutDiscards */
 	IPSTATS_MIB_OUTNOROUTES,		/* OutNoRoutes */
 	IPSTATS_MIB_REASMTIMEOUT,		/* ReasmTimeout */
@@ -42,6 +42,12 @@ enum
 	IPSTATS_MIB_OUTMCASTPKTS,		/* OutMcastPkts */
 	IPSTATS_MIB_INBCASTPKTS,		/* InBcastPkts */
 	IPSTATS_MIB_OUTBCASTPKTS,		/* OutBcastPkts */
+	IPSTATS_MIB_INOCTETS,			/* InOctets */
+	IPSTATS_MIB_OUTOCTETS,			/* OutOctets */
+	IPSTATS_MIB_INMCASTOCTETS,		/* InMcastOctets */
+	IPSTATS_MIB_OUTMCASTOCTETS,		/* OutMcastOctets */
+	IPSTATS_MIB_INBCASTOCTETS,		/* InBcastOctets */
+	IPSTATS_MIB_OUTBCASTOCTETS,		/* OutBcastOctets */
 	__IPSTATS_MIB_MAX
 };
 
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 421afb4d29b..3b461dffe24 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -194,7 +194,8 @@ struct ucred {
 #define AF_RXRPC	33	/* RxRPC sockets 		*/
 #define AF_ISDN		34	/* mISDN sockets 		*/
 #define AF_PHONET	35	/* Phonet sockets		*/
-#define AF_MAX		36	/* For now.. */
+#define AF_IEEE802154	36	/* IEEE802154 sockets		*/
+#define AF_MAX		37	/* For now.. */
 
 /* Protocol families, same as address families. */
 #define PF_UNSPEC	AF_UNSPEC
@@ -233,6 +234,7 @@ struct ucred {
 #define PF_RXRPC	AF_RXRPC
 #define PF_ISDN		AF_ISDN
 #define PF_PHONET	AF_PHONET
+#define PF_IEEE802154	AF_IEEE802154
 #define PF_MAX		AF_MAX
 
 /* Maximum queue length specifiable by listen.  */
@@ -303,14 +305,15 @@ struct ucred {
 #define SOL_BLUETOOTH	274
 #define SOL_PNPIPE	275
 #define SOL_RDS		276
+#define SOL_IUCV	277
 
 /* IPX options */
 #define IPX_TYPE	1
 
 #ifdef __KERNEL__
 extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
-extern int memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, 
-				int offset, int len);
+extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
+			       int offset, int len);
 extern int csum_partial_copy_fromiovecend(unsigned char *kdata, 
 					  struct iovec *iov, 
 					  int offset, 
@@ -318,6 +321,8 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
 
 extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode);
 extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
+extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
+			     int offset, int len);
 extern int move_addr_to_user(struct sockaddr *kaddr, int klen, void __user *uaddr, int __user *ulen);
 extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr);
 extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h
index 79506f5f9e6..1b5d5384fcd 100644
--- a/include/linux/spi/libertas_spi.h
+++ b/include/linux/spi/libertas_spi.h
@@ -22,9 +22,6 @@ struct libertas_spi_platform_data {
 	 * speed, you may want to use 0 here. */
 	u16 use_dummy_writes;
 
-	/* GPIO number to use as chip select */
-	u16 gpio_cs;
-
 	/* Board specific setup/teardown */
 	int (*setup)(struct spi_device *spi);
 	int (*teardown)(struct spi_device *spi);
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
new file mode 100644
index 00000000000..11430cab2aa
--- /dev/null
+++ b/include/linux/spi/wl12xx.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _LINUX_SPI_WL12XX_H
+#define _LINUX_SPI_WL12XX_H
+
+struct wl12xx_platform_data {
+	void (*set_power)(bool enable);
+};
+
+#endif
diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h
index 1a8cecc4f38..51efbef38fb 100644
--- a/include/linux/stacktrace.h
+++ b/include/linux/stacktrace.h
@@ -4,6 +4,8 @@
 struct task_struct;
 
 #ifdef CONFIG_STACKTRACE
+struct task_struct;
+
 struct stack_trace {
 	unsigned int nr_entries, max_entries;
 	unsigned long *entries;
@@ -11,6 +13,7 @@ struct stack_trace {
 };
 
 extern void save_stack_trace(struct stack_trace *trace);
+extern void save_stack_trace_bp(struct stack_trace *trace, unsigned long bp);
 extern void save_stack_trace_tsk(struct task_struct *tsk,
 				struct stack_trace *trace);
 
diff --git a/include/linux/swap.h b/include/linux/swap.h
index d476aad3ff5..0cedf31af0b 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -129,9 +129,10 @@ enum {
 
 #define SWAP_CLUSTER_MAX 32
 
-#define SWAP_MAP_MAX	0x7fff
-#define SWAP_MAP_BAD	0x8000
-
+#define SWAP_MAP_MAX	0x7ffe
+#define SWAP_MAP_BAD	0x7fff
+#define SWAP_HAS_CACHE  0x8000		/* There is a swap cache of entry. */
+#define SWAP_COUNT_MASK (~SWAP_HAS_CACHE)
 /*
  * The in-memory structure used to track swap areas.
  */
@@ -235,7 +236,6 @@ static inline int zone_reclaim(struct zone *z, gfp_t mask, unsigned int order)
 }
 #endif
 
-#ifdef CONFIG_UNEVICTABLE_LRU
 extern int page_evictable(struct page *page, struct vm_area_struct *vma);
 extern void scan_mapping_unevictable_pages(struct address_space *);
 
@@ -244,24 +244,6 @@ extern int scan_unevictable_handler(struct ctl_table *, int, struct file *,
 					void __user *, size_t *, loff_t *);
 extern int scan_unevictable_register_node(struct node *node);
 extern void scan_unevictable_unregister_node(struct node *node);
-#else
-static inline int page_evictable(struct page *page,
-						struct vm_area_struct *vma)
-{
-	return 1;
-}
-
-static inline void scan_mapping_unevictable_pages(struct address_space *mapping)
-{
-}
-
-static inline int scan_unevictable_register_node(struct node *node)
-{
-	return 0;
-}
-
-static inline void scan_unevictable_unregister_node(struct node *node) { }
-#endif
 
 extern int kswapd_run(int nid);
 
@@ -274,7 +256,7 @@ extern void swap_unplug_io_fn(struct backing_dev_info *, struct page *);
 
 #ifdef CONFIG_SWAP
 /* linux/mm/page_io.c */
-extern int swap_readpage(struct file *, struct page *);
+extern int swap_readpage(struct page *);
 extern int swap_writepage(struct page *page, struct writeback_control *wbc);
 extern void end_swap_bio_read(struct bio *bio, int err);
 
@@ -300,9 +282,11 @@ extern long total_swap_pages;
 extern void si_swapinfo(struct sysinfo *);
 extern swp_entry_t get_swap_page(void);
 extern swp_entry_t get_swap_page_of_type(int);
-extern int swap_duplicate(swp_entry_t);
+extern void swap_duplicate(swp_entry_t);
+extern int swapcache_prepare(swp_entry_t);
 extern int valid_swaphandles(swp_entry_t, unsigned long *);
 extern void swap_free(swp_entry_t);
+extern void swapcache_free(swp_entry_t, struct page *page);
 extern int free_swap_and_cache(swp_entry_t);
 extern int swap_type_of(dev_t, sector_t, struct block_device **);
 extern unsigned int count_swap_pages(int, int);
@@ -370,12 +354,20 @@ static inline void show_swap_cache_info(void)
 }
 
 #define free_swap_and_cache(swp)	is_migration_entry(swp)
-#define swap_duplicate(swp)		is_migration_entry(swp)
+#define swapcache_prepare(swp)		is_migration_entry(swp)
+
+static inline void swap_duplicate(swp_entry_t swp)
+{
+}
 
 static inline void swap_free(swp_entry_t swp)
 {
 }
 
+static inline void swapcache_free(swp_entry_t swp, struct page *page)
+{
+}
+
 static inline struct page *swapin_readahead(swp_entry_t swp, gfp_t gfp_mask,
 			struct vm_area_struct *vma, unsigned long addr)
 {
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 418d90f5eff..fa4242cdade 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -434,6 +434,7 @@ asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg);
 asmlinkage long sys_fcntl64(unsigned int fd,
 				unsigned int cmd, unsigned long arg);
 #endif
+asmlinkage long sys_pipe(int __user *fildes);
 asmlinkage long sys_pipe2(int __user *fildes, int flags);
 asmlinkage long sys_dup(unsigned int fildes);
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
@@ -751,8 +752,6 @@ asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,
 asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
 			  struct timespec __user *, const sigset_t __user *,
 			  size_t);
-asmlinkage long sys_pipe2(int __user *, int);
-asmlinkage long sys_pipe(int __user *);
 
 int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 9d5078bd23a..8afac76cd74 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -377,7 +377,7 @@ struct tcp_sock {
 	unsigned int		keepalive_time;	  /* time before keep alive takes place */
 	unsigned int		keepalive_intvl;  /* time interval between keep alive probes */
 
-	unsigned long last_synq_overflow; 
+	int			linger2;
 
 /* Receiver side RTT estimation */
 	struct {
@@ -406,8 +406,6 @@ struct tcp_sock {
 /* TCP MD5 Signagure Option information */
 	struct tcp_md5sig_info	*md5sig_info;
 #endif
-
-	int			linger2;
 };
 
 static inline struct tcp_sock *tcp_sk(const struct sock *sk)
diff --git a/include/linux/tick.h b/include/linux/tick.h
index 469b82d88b3..0482229c07d 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -97,10 +97,12 @@ extern void tick_clock_notify(void);
 extern int tick_check_oneshot_change(int allow_nohz);
 extern struct tick_sched *tick_get_tick_sched(int cpu);
 extern void tick_check_idle(int cpu);
+extern int tick_oneshot_mode_active(void);
 # else
 static inline void tick_clock_notify(void) { }
 static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
 static inline void tick_check_idle(int cpu) { }
+static inline int tick_oneshot_mode_active(void) { return 0; }
 # endif
 
 #else /* CONFIG_GENERIC_CLOCKEVENTS */
@@ -109,6 +111,7 @@ static inline void tick_cancel_sched_timer(int cpu) { }
 static inline void tick_clock_notify(void) { }
 static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
 static inline void tick_check_idle(int cpu) { }
+static inline int tick_oneshot_mode_active(void) { return 0; }
 #endif /* !CONFIG_GENERIC_CLOCKEVENTS */
 
 # ifdef CONFIG_NO_HZ
diff --git a/include/linux/timer.h b/include/linux/timer.h
index 6cdb6f3331f..ccf882eed8f 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -163,7 +163,10 @@ extern void add_timer_on(struct timer_list *timer, int cpu);
 extern int del_timer(struct timer_list * timer);
 extern int mod_timer(struct timer_list *timer, unsigned long expires);
 extern int mod_timer_pending(struct timer_list *timer, unsigned long expires);
+extern int mod_timer_pinned(struct timer_list *timer, unsigned long expires);
 
+#define TIMER_NOT_PINNED	0
+#define TIMER_PINNED		1
 /*
  * The jiffies value which is added to now, when there is no timer
  * in the timer wheel:
diff --git a/include/linux/timex.h b/include/linux/timex.h
index aa3475fcff6..e6967d10d9e 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -170,17 +170,37 @@ struct timex {
 #include <asm/timex.h>
 
 /*
- * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
- * for a slightly underdamped convergence characteristic. SHIFT_KH
- * establishes the damping of the FLL and is chosen by wisdom and black
- * art.
+ * SHIFT_PLL is used as a dampening factor to define how much we
+ * adjust the frequency correction for a given offset in PLL mode.
+ * It also used in dampening the offset correction, to define how
+ * much of the current value in time_offset we correct for each
+ * second. Changing this value changes the stiffness of the ntp
+ * adjustment code. A lower value makes it more flexible, reducing
+ * NTP convergence time. A higher value makes it stiffer, increasing
+ * convergence time, but making the clock more stable.
  *
- * MAXTC establishes the maximum time constant of the PLL. With the
- * SHIFT_KG and SHIFT_KF values given and a time constant range from
- * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours,
- * respectively.
+ * In David Mills' nanokernel reference implementation SHIFT_PLL is 4.
+ * However this seems to increase convergence time much too long.
+ *
+ * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html
+ *
+ * In the above mailing list discussion, it seems the value of 4
+ * was appropriate for other Unix systems with HZ=100, and that
+ * SHIFT_PLL should be decreased as HZ increases. However, Linux's
+ * clock steering implementation is HZ independent.
+ *
+ * Through experimentation, a SHIFT_PLL value of 2 was found to allow
+ * for fast convergence (very similar to the NTPv3 code used prior to
+ * v2.6.19), with good clock stability.
+ *
+ *
+ * SHIFT_FLL is used as a dampening factor to define how much we
+ * adjust the frequency correction for a given offset in FLL mode.
+ * In David Mills' nanokernel reference implementation SHIFT_FLL is 2.
+ *
+ * MAXTC establishes the maximum time constant of the PLL.
  */
-#define SHIFT_PLL	4	/* PLL frequency factor (shift) */
+#define SHIFT_PLL	2	/* PLL frequency factor (shift) */
 #define SHIFT_FLL	2	/* FLL frequency factor (shift) */
 #define MAXTC		10	/* maximum time constant (shift) */
 
@@ -192,10 +212,10 @@ struct timex {
 #define SHIFT_USEC 16		/* frequency offset scale (shift) */
 #define PPM_SCALE ((s64)NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
 #define PPM_SCALE_INV_SHIFT 19
-#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
+#define PPM_SCALE_INV ((1LL << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
 		       PPM_SCALE + 1)
 
-#define MAXPHASE 500000000l	/* max phase error (ns) */
+#define MAXPHASE 500000000L	/* max phase error (ns) */
 #define MAXFREQ 500000		/* max frequency error (ns/s) */
 #define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
 #define MINSEC 256		/* min interval between updates (s) */
@@ -260,6 +280,9 @@ extern int do_adjtimex(struct timex *);
 
 int read_current_timer(unsigned long *timer_val);
 
+/* The clock frequency of the i8253/i8254 PIT */
+#define PIT_TICK_RATE 1193182ul
+
 #endif /* KERNEL */
 
 #endif /* LINUX_TIMEX_H */
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 14df7e635d4..b9dc4ca0246 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -198,7 +198,7 @@ static inline void tracepoint_synchronize_unregister(void)
  *	* This is how the trace record is structured and will
  *	* be saved into the ring buffer. These are the fields
  *	* that will be exposed to user-space in
- *	* /debug/tracing/events/<*>/format.
+ *	* /sys/kernel/debug/tracing/events/<*>/format.
  *	*
  *	* The declared 'local variable' is called '__entry'
  *	*
@@ -258,7 +258,7 @@ static inline void tracepoint_synchronize_unregister(void)
  * tracepoint callback (this is used by programmatic plugins and
  * can also by used by generic instrumentation like SystemTap), and
  * it is also used to expose a structured trace record in
- * /debug/tracing/events/.
+ * /sys/kernel/debug/tracing/events/.
  */
 
 #define TRACE_EVENT(name, proto, args, struct, assign, print)	\
diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h
index 6b7703e75ce..71339dc531c 100644
--- a/include/linux/ultrasound.h
+++ b/include/linux/ultrasound.h
@@ -34,7 +34,7 @@
  *		_GUS_VOICEOFF	- Stops voice (no parameters)
  *		_GUS_VOICEFADE	- Stops the voice smoothly.
  *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
- *		_GUS_VOICEBALA	- Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7)
+ *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
  *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
  *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
  *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 3aa2cd1f8d0..84929e91403 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -36,6 +36,7 @@ struct wusb_dev;
  *  - configs have one (often) or more interfaces;
  *  - interfaces have one (usually) or more settings;
  *  - each interface setting has zero or (usually) more endpoints.
+ *  - a SuperSpeed endpoint has a companion descriptor
  *
  * And there might be other descriptors mixed in with those.
  *
@@ -44,6 +45,19 @@ struct wusb_dev;
 
 struct ep_device;
 
+/* For SS devices */
+/**
+ * struct usb_host_ss_ep_comp - Valid for SuperSpeed devices only
+ * @desc: endpoint companion descriptor, wMaxPacketSize in native byteorder
+ * @extra: descriptors following this endpoint companion descriptor
+ * @extralen: how many bytes of "extra" are valid
+ */
+struct usb_host_ss_ep_comp {
+	struct usb_ss_ep_comp_descriptor	desc;
+	unsigned char				*extra;   /* Extra descriptors */
+	int					extralen;
+};
+
 /**
  * struct usb_host_endpoint - host-side endpoint descriptor and queue
  * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
@@ -51,6 +65,7 @@ struct ep_device;
  * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
  *	with one or more transfer descriptors (TDs) per urb
  * @ep_dev: ep_device for sysfs info
+ * @ss_ep_comp: companion descriptor information for this endpoint
  * @extra: descriptors following this endpoint in the configuration
  * @extralen: how many bytes of "extra" are valid
  * @enabled: URBs may be submitted to this endpoint
@@ -63,6 +78,7 @@ struct usb_host_endpoint {
 	struct list_head		urb_list;
 	void				*hcpriv;
 	struct ep_device 		*ep_dev;	/* For sysfs info */
+	struct usb_host_ss_ep_comp	*ss_ep_comp;	/* For SS devices */
 
 	unsigned char *extra;   /* Extra descriptors */
 	int extralen;
@@ -336,7 +352,6 @@ struct usb_bus {
 #ifdef CONFIG_USB_DEVICEFS
 	struct dentry *usbfs_dentry;	/* usbfs dentry entry for the bus */
 #endif
-	struct device *dev;		/* device for this bus */
 
 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
 	struct mon_bus *mon_bus;	/* non-null when associated */
@@ -363,6 +378,7 @@ struct usb_tt;
  * struct usb_device - kernel's representation of a USB device
  * @devnum: device number; address on a USB bus
  * @devpath: device ID string for use in messages (e.g., /port/...)
+ * @route: tree topology hex string for use with xHCI
  * @state: device state: configured, not attached, etc.
  * @speed: device speed: high/full/low (or error)
  * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
@@ -420,6 +436,7 @@ struct usb_tt;
  * @skip_sys_resume: skip the next system resume
  * @wusb_dev: if this is a Wireless USB device, link to the WUSB
  *	specific data for the device.
+ * @slot_id: Slot ID assigned by xHCI
  *
  * Notes:
  * Usbcore drivers should not set usbdev->state directly.  Instead use
@@ -428,6 +445,7 @@ struct usb_tt;
 struct usb_device {
 	int		devnum;
 	char		devpath [16];
+	u32		route;
 	enum usb_device_state	state;
 	enum usb_device_speed	speed;
 
@@ -503,6 +521,7 @@ struct usb_device {
 	unsigned skip_sys_resume:1;
 #endif
 	struct wusb_dev *wusb_dev;
+	int slot_id;
 };
 #define	to_usb_device(d) container_of(d, struct usb_device, dev)
 
@@ -869,6 +888,8 @@ struct usb_driver {
  * struct usb_device_driver - identifies USB device driver to usbcore
  * @name: The driver name should be unique among USB drivers,
  *	and should normally be the same as the module name.
+ * @nodename: Callback to provide a naming hint for a possible
+ *	device node to create.
  * @probe: Called to see if the driver is willing to manage a particular
  *	device.  If it is, probe returns zero and uses dev_set_drvdata()
  *	to associate driver-specific data with the device.  If unwilling
@@ -912,6 +933,7 @@ extern struct bus_type usb_bus_type;
  */
 struct usb_class_driver {
 	char *name;
+	char *(*nodename)(struct device *dev);
 	const struct file_operations *fops;
 	int minor_base;
 };
@@ -1041,7 +1063,9 @@ typedef void (*usb_complete_t)(struct urb *);
  * @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the
  *	device driver has provided this DMA address for the setup packet.
  *	The host controller driver should use this in preference to
- *	setup_packet.
+ *	setup_packet, but the HCD may chose to ignore the address if it must
+ *	copy the setup packet into internal structures.  Therefore, setup_packet
+ *	must always point to a valid buffer.
  * @start_frame: Returns the initial frame for isochronous transfers.
  * @number_of_packets: Lists the number of ISO transfer buffers.
  * @interval: Specifies the polling interval for interrupt or isochronous
@@ -1177,6 +1201,8 @@ struct urb {
 	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
 	void *transfer_buffer;		/* (in) associated data buffer */
 	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
+	struct usb_sg_request *sg;	/* (in) scatter gather buffer list */
+	int num_sgs;			/* (in) number of entries in the sg list */
 	u32 transfer_buffer_length;	/* (in) data buffer length */
 	u32 actual_length;		/* (return) actual transfer length */
 	unsigned char *setup_packet;	/* (in) setup packet (control only) */
@@ -1422,8 +1448,8 @@ struct usb_sg_request {
 	int			status;
 	size_t			bytes;
 
-	/*
-	 * members below are private: to usbcore,
+	/* private:
+	 * members below are private to usbcore,
 	 * and are not provided for driver access!
 	 */
 	spinlock_t		lock;
@@ -1558,6 +1584,9 @@ extern void usb_unregister_notify(struct notifier_block *nb);
 #define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
 	format "\n" , ## arg)
 
+/* debugfs stuff */
+extern struct dentry *usb_debug_root;
+
 #endif  /* __KERNEL__ */
 
 #endif
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 8cb025fef63..b5744bc218a 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -24,10 +24,75 @@
 #define USB_SUBCLASS_AUDIOCONTROL	0x01
 #define USB_SUBCLASS_AUDIOSTREAMING	0x02
 #define USB_SUBCLASS_MIDISTREAMING	0x03
+#define USB_SUBCLASS_VENDOR_SPEC	0xff
 
+/* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/
+#define HEADER				0x01
+#define INPUT_TERMINAL			0x02
+#define OUTPUT_TERMINAL			0x03
+#define MIXER_UNIT			0x04
+#define SELECTOR_UNIT			0x05
+#define FEATURE_UNIT			0x06
+#define PROCESSING_UNIT			0x07
+#define EXTENSION_UNIT			0x08
+
+#define AS_GENERAL			0x01
+#define FORMAT_TYPE			0x02
+#define FORMAT_SPECIFIC			0x03
+
+#define EP_GENERAL			0x01
+
+#define MS_GENERAL			0x01
+#define MIDI_IN_JACK			0x02
+#define MIDI_OUT_JACK			0x03
+
+/* endpoint attributes */
+#define EP_ATTR_MASK			0x0c
+#define EP_ATTR_ASYNC			0x04
+#define EP_ATTR_ADAPTIVE		0x08
+#define EP_ATTR_SYNC			0x0c
+
+/* cs endpoint attributes */
+#define EP_CS_ATTR_SAMPLE_RATE		0x01
+#define EP_CS_ATTR_PITCH_CONTROL	0x02
+#define EP_CS_ATTR_FILL_MAX		0x80
+
+/* Audio Class specific Request Codes */
+#define USB_AUDIO_SET_INTF		0x21
+#define USB_AUDIO_SET_ENDPOINT		0x22
+#define USB_AUDIO_GET_INTF		0xa1
+#define USB_AUDIO_GET_ENDPOINT		0xa2
+
+#define SET_	0x00
+#define GET_	0x80
+
+#define _CUR	0x1
+#define _MIN	0x2
+#define _MAX	0x3
+#define _RES	0x4
+#define _MEM	0x5
+
+#define SET_CUR		(SET_ | _CUR)
+#define GET_CUR		(GET_ | _CUR)
+#define SET_MIN		(SET_ | _MIN)
+#define GET_MIN		(GET_ | _MIN)
+#define SET_MAX		(SET_ | _MAX)
+#define GET_MAX		(GET_ | _MAX)
+#define SET_RES		(SET_ | _RES)
+#define GET_RES		(GET_ | _RES)
+#define SET_MEM		(SET_ | _MEM)
+#define GET_MEM		(GET_ | _MEM)
+
+#define GET_STAT	0xff
+
+#define USB_AC_TERMINAL_UNDEFINED	0x100
+#define USB_AC_TERMINAL_STREAMING	0x101
+#define USB_AC_TERMINAL_VENDOR_SPEC	0x1FF
+
+/* Terminal Control Selectors */
 /* 4.3.2  Class-Specific AC Interface Descriptor */
 struct usb_ac_header_descriptor {
-	__u8  bLength;			/* 8+n */
+	__u8  bLength;			/* 8 + n */
 	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
 	__u8  bDescriptorSubtype;	/* USB_MS_HEADER */
 	__le16 bcdADC;			/* 0x0100 */
@@ -36,7 +101,7 @@ struct usb_ac_header_descriptor {
 	__u8  baInterfaceNr[];		/* [n] */
 } __attribute__ ((packed));
 
-#define USB_DT_AC_HEADER_SIZE(n)	(8+(n))
+#define USB_DT_AC_HEADER_SIZE(n)	(8 + (n))
 
 /* As above, but more useful for defining your own descriptors: */
 #define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) 			\
@@ -50,4 +115,200 @@ struct usb_ac_header_descriptor_##n {				\
 	__u8  baInterfaceNr[n];					\
 } __attribute__ ((packed))
 
+/* 4.3.2.1 Input Terminal Descriptor */
+struct usb_input_terminal_descriptor {
+	__u8  bLength;			/* in bytes: 12 */
+	__u8  bDescriptorType;		/* CS_INTERFACE descriptor type */
+	__u8  bDescriptorSubtype;	/* INPUT_TERMINAL descriptor subtype */
+	__u8  bTerminalID;		/* Constant uniquely terminal ID */
+	__le16 wTerminalType;		/* USB Audio Terminal Types */
+	__u8  bAssocTerminal;		/* ID of the Output Terminal associated */
+	__u8  bNrChannels;		/* Number of logical output channels */
+	__le16 wChannelConfig;
+	__u8  iChannelNames;
+	__u8  iTerminal;
+} __attribute__ ((packed));
+
+#define USB_DT_AC_INPUT_TERMINAL_SIZE			12
+
+#define USB_AC_INPUT_TERMINAL_UNDEFINED			0x200
+#define USB_AC_INPUT_TERMINAL_MICROPHONE		0x201
+#define USB_AC_INPUT_TERMINAL_DESKTOP_MICROPHONE	0x202
+#define USB_AC_INPUT_TERMINAL_PERSONAL_MICROPHONE	0x203
+#define USB_AC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE	0x204
+#define USB_AC_INPUT_TERMINAL_MICROPHONE_ARRAY		0x205
+#define USB_AC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY	0x206
+
+/* 4.3.2.2 Output Terminal Descriptor */
+struct usb_output_terminal_descriptor {
+	__u8  bLength;			/* in bytes: 9 */
+	__u8  bDescriptorType;		/* CS_INTERFACE descriptor type */
+	__u8  bDescriptorSubtype;	/* OUTPUT_TERMINAL descriptor subtype */
+	__u8  bTerminalID;		/* Constant uniquely terminal ID */
+	__le16 wTerminalType;		/* USB Audio Terminal Types */
+	__u8  bAssocTerminal;		/* ID of the Input Terminal associated */
+	__u8  bSourceID;		/* ID of the connected Unit or Terminal*/
+	__u8  iTerminal;
+} __attribute__ ((packed));
+
+#define USB_DT_AC_OUTPUT_TERMINAL_SIZE				9
+
+#define USB_AC_OUTPUT_TERMINAL_UNDEFINED			0x300
+#define USB_AC_OUTPUT_TERMINAL_SPEAKER				0x301
+#define USB_AC_OUTPUT_TERMINAL_HEADPHONES			0x302
+#define USB_AC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO	0x303
+#define USB_AC_OUTPUT_TERMINAL_DESKTOP_SPEAKER			0x304
+#define USB_AC_OUTPUT_TERMINAL_ROOM_SPEAKER			0x305
+#define USB_AC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER		0x306
+#define USB_AC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER		0x307
+
+/* Set bControlSize = 2 as default setting */
+#define USB_DT_AC_FEATURE_UNIT_SIZE(ch)		(7 + ((ch) + 1) * 2)
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(ch) 		\
+struct usb_ac_feature_unit_descriptor_##ch {			\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubtype;				\
+	__u8  bUnitID;						\
+	__u8  bSourceID;					\
+	__u8  bControlSize;					\
+	__le16 bmaControls[ch + 1];				\
+	__u8  iFeature;						\
+} __attribute__ ((packed))
+
+/* 4.5.2 Class-Specific AS Interface Descriptor */
+struct usb_as_header_descriptor {
+	__u8  bLength;			/* in bytes: 7 */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* AS_GENERAL */
+	__u8  bTerminalLink;		/* Terminal ID of connected Terminal */
+	__u8  bDelay;			/* Delay introduced by the data path */
+	__le16 wFormatTag;		/* The Audio Data Format */
+} __attribute__ ((packed));
+
+#define USB_DT_AS_HEADER_SIZE		7
+
+#define USB_AS_AUDIO_FORMAT_TYPE_I_UNDEFINED	0x0
+#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM		0x1
+#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM8		0x2
+#define USB_AS_AUDIO_FORMAT_TYPE_I_IEEE_FLOAT	0x3
+#define USB_AS_AUDIO_FORMAT_TYPE_I_ALAW		0x4
+#define USB_AS_AUDIO_FORMAT_TYPE_I_MULAW	0x5
+
+struct usb_as_format_type_i_continuous_descriptor {
+	__u8  bLength;			/* in bytes: 8 + (ns * 3) */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* FORMAT_TYPE */
+	__u8  bFormatType;		/* FORMAT_TYPE_1 */
+	__u8  bNrChannels;		/* physical channels in the stream */
+	__u8  bSubframeSize;		/* */
+	__u8  bBitResolution;
+	__u8  bSamFreqType;
+	__u8  tLowerSamFreq[3];
+	__u8  tUpperSamFreq[3];
+} __attribute__ ((packed));
+
+#define USB_AS_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE	14
+
+struct usb_as_formate_type_i_discrete_descriptor {
+	__u8  bLength;			/* in bytes: 8 + (ns * 3) */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* FORMAT_TYPE */
+	__u8  bFormatType;		/* FORMAT_TYPE_1 */
+	__u8  bNrChannels;		/* physical channels in the stream */
+	__u8  bSubframeSize;		/* */
+	__u8  bBitResolution;
+	__u8  bSamFreqType;
+	__u8  tSamFreq[][3];
+} __attribute__ ((packed));
+
+#define DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(n) 		\
+struct usb_as_formate_type_i_discrete_descriptor_##n {		\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubtype;				\
+	__u8  bFormatType;					\
+	__u8  bNrChannels;					\
+	__u8  bSubframeSize;					\
+	__u8  bBitResolution;					\
+	__u8  bSamFreqType;					\
+	__u8  tSamFreq[n][3];					\
+} __attribute__ ((packed))
+
+#define USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n)	(8 + (n * 3))
+
+#define USB_AS_FORMAT_TYPE_UNDEFINED	0x0
+#define USB_AS_FORMAT_TYPE_I		0x1
+#define USB_AS_FORMAT_TYPE_II		0x2
+#define USB_AS_FORMAT_TYPE_III		0x3
+
+#define USB_AS_ENDPOINT_ASYNC		(1 << 2)
+#define USB_AS_ENDPOINT_ADAPTIVE	(2 << 2)
+#define USB_AS_ENDPOINT_SYNC		(3 << 2)
+
+struct usb_as_iso_endpoint_descriptor {
+	__u8  bLength;			/* in bytes: 7 */
+	__u8  bDescriptorType;		/* USB_DT_CS_ENDPOINT */
+	__u8  bDescriptorSubtype;	/* EP_GENERAL */
+	__u8  bmAttributes;
+	__u8  bLockDelayUnits;
+	__le16 wLockDelay;
+};
+#define USB_AS_ISO_ENDPOINT_DESC_SIZE	7
+
+#define FU_CONTROL_UNDEFINED		0x00
+#define MUTE_CONTROL			0x01
+#define VOLUME_CONTROL			0x02
+#define BASS_CONTROL			0x03
+#define MID_CONTROL			0x04
+#define TREBLE_CONTROL			0x05
+#define GRAPHIC_EQUALIZER_CONTROL	0x06
+#define AUTOMATIC_GAIN_CONTROL		0x07
+#define DELAY_CONTROL			0x08
+#define BASS_BOOST_CONTROL		0x09
+#define LOUDNESS_CONTROL		0x0a
+
+#define FU_MUTE		(1 << (MUTE_CONTROL - 1))
+#define FU_VOLUME	(1 << (VOLUME_CONTROL - 1))
+#define FU_BASS		(1 << (BASS_CONTROL - 1))
+#define FU_MID		(1 << (MID_CONTROL - 1))
+#define FU_TREBLE	(1 << (TREBLE_CONTROL - 1))
+#define FU_GRAPHIC_EQ	(1 << (GRAPHIC_EQUALIZER_CONTROL - 1))
+#define FU_AUTO_GAIN	(1 << (AUTOMATIC_GAIN_CONTROL - 1))
+#define FU_DELAY	(1 << (DELAY_CONTROL - 1))
+#define FU_BASS_BOOST	(1 << (BASS_BOOST_CONTROL - 1))
+#define FU_LOUDNESS	(1 << (LOUDNESS_CONTROL - 1))
+
+struct usb_audio_control {
+	struct list_head list;
+	const char *name;
+	u8 type;
+	int data[5];
+	int (*set)(struct usb_audio_control *con, u8 cmd, int value);
+	int (*get)(struct usb_audio_control *con, u8 cmd);
+};
+
+static inline int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value)
+{
+	con->data[cmd] = value;
+
+	return 0;
+}
+
+static inline int generic_get_cmd(struct usb_audio_control *con, u8 cmd)
+{
+	return con->data[cmd];
+}
+
+struct usb_audio_control_selector {
+	struct list_head list;
+	struct list_head control;
+	u8 id;
+	const char *name;
+	u8 type;
+	struct usb_descriptor_header *desc;
+};
+
 #endif /* __LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index b145119a90d..93223638f70 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -191,6 +191,8 @@ struct usb_ctrlrequest {
 #define USB_DT_WIRE_ADAPTER		0x21
 #define USB_DT_RPIPE			0x22
 #define USB_DT_CS_RADIO_CONTROL		0x23
+/* From the USB 3.0 spec */
+#define	USB_DT_SS_ENDPOINT_COMP		0x30
 
 /* Conventional codes for class-specific descriptors.  The convention is
  * defined in the USB "Common Class" Spec (3.11).  Individual class specs
@@ -535,6 +537,20 @@ static inline int usb_endpoint_is_isoc_out(
 
 /*-------------------------------------------------------------------------*/
 
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bMaxBurst;
+	__u8  bmAttributes;
+	__u16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE		6
+
+/*-------------------------------------------------------------------------*/
+
 /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
 struct usb_qualifier_descriptor {
 	__u8  bLength;
@@ -752,6 +768,7 @@ enum usb_device_speed {
 	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
 	USB_SPEED_HIGH,				/* usb 2.0 */
 	USB_SPEED_VARIABLE,			/* wireless (usb 2.5) */
+	USB_SPEED_SUPER,			/* usb 3.0 */
 };
 
 enum usb_device_state {
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index acd7b0f06c8..4f6bb3d2160 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -124,6 +124,7 @@ struct usb_function {
 	void			(*suspend)(struct usb_function *);
 	void			(*resume)(struct usb_function *);
 
+	/* private: */
 	/* internals */
 	struct list_head		list;
 };
@@ -219,6 +220,7 @@ struct usb_configuration {
 
 	struct usb_composite_dev	*cdev;
 
+	/* private: */
 	/* internals */
 	struct list_head	list;
 	struct list_head	functions;
@@ -321,6 +323,7 @@ struct usb_composite_dev {
 
 	struct usb_configuration	*config;
 
+	/* private: */
 	/* internals */
 	struct usb_device_descriptor	desc;
 	struct list_head		configs;
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
new file mode 100644
index 00000000000..e115ae6df1d
--- /dev/null
+++ b/include/linux/usb/langwell_otg.h
@@ -0,0 +1,177 @@
+/*
+ * Intel Langwell USB OTG transceiver driver
+ * Copyright (C) 2008, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_OTG_H__
+#define __LANGWELL_OTG_H__
+
+/* notify transceiver driver about OTG events */
+extern void langwell_update_transceiver(void);
+/* HCD register bus driver */
+extern int langwell_register_host(struct pci_driver *host_driver);
+/* HCD unregister bus driver */
+extern void langwell_unregister_host(struct pci_driver *host_driver);
+/* DCD register bus driver */
+extern int langwell_register_peripheral(struct pci_driver *client_driver);
+/* DCD unregister bus driver */
+extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
+/* No silent failure, output warning message */
+extern void langwell_otg_nsf_msg(unsigned long message);
+
+#define CI_USBCMD		0x30
+#	define USBCMD_RST		BIT(1)
+#	define USBCMD_RS		BIT(0)
+#define CI_USBSTS		0x34
+#	define USBSTS_SLI		BIT(8)
+#	define USBSTS_URI		BIT(6)
+#	define USBSTS_PCI		BIT(2)
+#define CI_PORTSC1		0x74
+#	define PORTSC_PP		BIT(12)
+#	define PORTSC_LS		(BIT(11) | BIT(10))
+#	define PORTSC_SUSP		BIT(7)
+#	define PORTSC_CCS		BIT(0)
+#define CI_HOSTPC1		0xb4
+#	define HOSTPC1_PHCD		BIT(22)
+#define CI_OTGSC		0xf4
+#	define OTGSC_DPIE		BIT(30)
+#	define OTGSC_1MSE		BIT(29)
+#	define OTGSC_BSEIE		BIT(28)
+#	define OTGSC_BSVIE		BIT(27)
+#	define OTGSC_ASVIE		BIT(26)
+#	define OTGSC_AVVIE		BIT(25)
+#	define OTGSC_IDIE		BIT(24)
+#	define OTGSC_DPIS		BIT(22)
+#	define OTGSC_1MSS		BIT(21)
+#	define OTGSC_BSEIS		BIT(20)
+#	define OTGSC_BSVIS		BIT(19)
+#	define OTGSC_ASVIS		BIT(18)
+#	define OTGSC_AVVIS		BIT(17)
+#	define OTGSC_IDIS		BIT(16)
+#	define OTGSC_DPS		BIT(14)
+#	define OTGSC_1MST		BIT(13)
+#	define OTGSC_BSE		BIT(12)
+#	define OTGSC_BSV		BIT(11)
+#	define OTGSC_ASV		BIT(10)
+#	define OTGSC_AVV		BIT(9)
+#	define OTGSC_ID			BIT(8)
+#	define OTGSC_HABA		BIT(7)
+#	define OTGSC_HADP		BIT(6)
+#	define OTGSC_IDPU		BIT(5)
+#	define OTGSC_DP			BIT(4)
+#	define OTGSC_OT			BIT(3)
+#	define OTGSC_HAAR		BIT(2)
+#	define OTGSC_VC			BIT(1)
+#	define OTGSC_VD			BIT(0)
+#	define OTGSC_INTEN_MASK		(0x7f << 24)
+#	define OTGSC_INTSTS_MASK	(0x7f << 16)
+#define CI_USBMODE		0xf8
+#	define USBMODE_CM		(BIT(1) | BIT(0))
+#	define USBMODE_IDLE		0
+#	define USBMODE_DEVICE		0x2
+#	define USBMODE_HOST		0x3
+
+#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
+
+struct otg_hsm {
+	/* Input */
+	int a_bus_resume;
+	int a_bus_suspend;
+	int a_conn;
+	int a_sess_vld;
+	int a_srp_det;
+	int a_vbus_vld;
+	int b_bus_resume;
+	int b_bus_suspend;
+	int b_conn;
+	int b_se0_srp;
+	int b_sess_end;
+	int b_sess_vld;
+	int id;
+
+	/* Internal variables */
+	int a_set_b_hnp_en;
+	int b_srp_done;
+	int b_hnp_enable;
+
+	/* Timeout indicator for timers */
+	int a_wait_vrise_tmout;
+	int a_wait_bcon_tmout;
+	int a_aidl_bdis_tmout;
+	int b_ase0_brst_tmout;
+	int b_bus_suspend_tmout;
+	int b_srp_res_tmout;
+
+	/* Informative variables */
+	int a_bus_drop;
+	int a_bus_req;
+	int a_clr_err;
+	int a_suspend_req;
+	int b_bus_req;
+
+	/* Output */
+	int drv_vbus;
+	int loc_conn;
+	int loc_sof;
+
+	/* Others */
+	int b_bus_suspend_vld;
+};
+
+#define TA_WAIT_VRISE	100
+#define TA_WAIT_BCON	30000
+#define TA_AIDL_BDIS	15000
+#define TB_ASE0_BRST	5000
+#define TB_SE0_SRP	2
+#define TB_SRP_RES	100
+#define TB_BUS_SUSPEND	500
+
+struct langwell_otg_timer {
+	unsigned long expires;	/* Number of count increase to timeout */
+	unsigned long count;	/* Tick counter */
+	void (*function)(unsigned long);	/* Timeout function */
+	unsigned long data;	/* Data passed to function */
+	struct list_head list;
+};
+
+struct langwell_otg {
+	struct otg_transceiver 	otg;
+	struct otg_hsm 		hsm;
+	void __iomem 		*regs;
+	unsigned 		region;
+	struct pci_driver	*host_ops;
+	struct pci_driver	*client_ops;
+	struct pci_dev		*pdev;
+	struct work_struct 	work;
+	struct workqueue_struct	*qwork;
+	spinlock_t 		lock;
+	spinlock_t 		wq_lock;
+};
+
+static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
+{
+	return container_of(otg, struct langwell_otg, otg);
+}
+
+#ifdef DEBUG
+#define otg_dbg(fmt, args...) \
+	printk(KERN_DEBUG fmt , ## args)
+#else
+#define otg_dbg(fmt, args...) \
+	do { } while (0)
+#endif /* DEBUG */
+#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
new file mode 100644
index 00000000000..c949178a653
--- /dev/null
+++ b/include/linux/usb/langwell_udc.h
@@ -0,0 +1,310 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_UDC_H
+#define __LANGWELL_UDC_H
+
+
+/* MACRO defines */
+#define	CAP_REG_OFFSET		0x0
+#define	OP_REG_OFFSET		0x28
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#define	DQH_ALIGNMENT		2048
+#define	DTD_ALIGNMENT		64
+#define	DMA_BOUNDARY		4096
+
+#define	EP0_MAX_PKT_SIZE	64
+#define EP_DIR_IN		1
+#define EP_DIR_OUT		0
+
+#define FLUSH_TIMEOUT		1000
+#define RESET_TIMEOUT		1000
+#define SETUPSTAT_TIMEOUT	100
+#define PRIME_TIMEOUT		100
+
+
+/* device memory space registers */
+
+/* Capability Registers, BAR0 + CAP_REG_OFFSET */
+struct langwell_cap_regs {
+	/* offset: 0x0 */
+	u8	caplength;	/* offset of Operational Register */
+	u8	_reserved3;
+	u16	hciversion;	/* H: BCD encoding of host version */
+	u32	hcsparams;	/* H: host port steering logic capability */
+	u32	hccparams;	/* H: host multiple mode control capability */
+#define	HCC_LEN	BIT(17)		/* Link power management (LPM) capability */
+	u8	_reserved4[0x20-0xc];
+	/* offset: 0x20 */
+	u16	dciversion;	/* BCD encoding of device version */
+	u8	_reserved5[0x24-0x22];
+	u32	dccparams;	/* overall device controller capability */
+#define	HOSTCAP	BIT(8)		/* host capable */
+#define	DEVCAP	BIT(7)		/* device capable */
+#define DEN(d)	\
+	(((d)>>0)&0x1f)		/* bits 4:0, device endpoint number */
+} __attribute__ ((packed));
+
+
+/* Operational Registers, BAR0 + OP_REG_OFFSET */
+struct langwell_op_regs {
+	/* offset: 0x28 */
+	u32	extsts;
+#define	EXTS_TI1	BIT(4)	/* general purpose timer interrupt 1 */
+#define	EXTS_TI1TI0	BIT(3)	/* general purpose timer interrupt 0 */
+#define	EXTS_TI1UPI	BIT(2)	/* USB host periodic interrupt */
+#define	EXTS_TI1UAI	BIT(1)	/* USB host asynchronous interrupt */
+#define	EXTS_TI1NAKI	BIT(0)	/* NAK interrupt */
+	u32	extintr;
+#define	EXTI_TIE1	BIT(4)	/* general purpose timer interrupt enable 1 */
+#define	EXTI_TIE0	BIT(3)	/* general purpose timer interrupt enable 0 */
+#define	EXTI_UPIE	BIT(2)	/* USB host periodic interrupt enable */
+#define	EXTI_UAIE	BIT(1)	/* USB host asynchronous interrupt enable */
+#define	EXTI_NAKE	BIT(0)	/* NAK interrupt enable */
+	/* offset: 0x30 */
+	u32	usbcmd;
+#define	CMD_HIRD(u)	\
+	(((u)>>24)&0xf)		/* bits 27:24, host init resume duration */
+#define	CMD_ITC(u)	\
+	(((u)>>16)&0xff)	/* bits 23:16, interrupt threshold control */
+#define	CMD_PPE		BIT(15)	/* per-port change events enable */
+#define	CMD_ATDTW	BIT(14)	/* add dTD tripwire */
+#define	CMD_SUTW	BIT(13)	/* setup tripwire */
+#define	CMD_ASPE	BIT(11) /* asynchronous schedule park mode enable */
+#define	CMD_FS2		BIT(10)	/* frame list size */
+#define	CMD_ASP1	BIT(9)	/* asynchronous schedule park mode count */
+#define	CMD_ASP0	BIT(8)
+#define	CMD_LR		BIT(7)	/* light host/device controller reset */
+#define	CMD_IAA		BIT(6)	/* interrupt on async advance doorbell */
+#define	CMD_ASE		BIT(5)	/* asynchronous schedule enable */
+#define	CMD_PSE		BIT(4)	/* periodic schedule enable */
+#define	CMD_FS1		BIT(3)
+#define	CMD_FS0		BIT(2)
+#define	CMD_RST		BIT(1)	/* controller reset */
+#define	CMD_RUNSTOP	BIT(0)	/* run/stop */
+	u32	usbsts;
+#define	STS_PPCI(u)	\
+	(((u)>>16)&0xffff)	/* bits 31:16, port-n change detect */
+#define	STS_AS		BIT(15)	/* asynchronous schedule status */
+#define	STS_PS		BIT(14)	/* periodic schedule status */
+#define	STS_RCL		BIT(13)	/* reclamation */
+#define	STS_HCH		BIT(12)	/* HC halted */
+#define	STS_ULPII	BIT(10)	/* ULPI interrupt */
+#define	STS_SLI		BIT(8)	/* DC suspend */
+#define	STS_SRI		BIT(7)	/* SOF received */
+#define	STS_URI		BIT(6)	/* USB reset received */
+#define	STS_AAI		BIT(5)	/* interrupt on async advance */
+#define	STS_SEI		BIT(4)	/* system error */
+#define	STS_FRI		BIT(3)	/* frame list rollover */
+#define	STS_PCI		BIT(2)	/* port change detect */
+#define	STS_UEI		BIT(1)	/* USB error interrupt */
+#define	STS_UI		BIT(0)	/* USB interrupt */
+	u32	usbintr;
+/* bits 31:16, per-port interrupt enable */
+#define	INTR_PPCE(u)	(((u)>>16)&0xffff)
+#define	INTR_ULPIE	BIT(10)	/* ULPI enable */
+#define	INTR_SLE	BIT(8)	/* DC sleep/suspend enable */
+#define	INTR_SRE	BIT(7)	/* SOF received enable */
+#define	INTR_URE	BIT(6)	/* USB reset enable */
+#define	INTR_AAE	BIT(5)	/* interrupt on async advance enable */
+#define	INTR_SEE	BIT(4)	/* system error enable */
+#define	INTR_FRE	BIT(3)	/* frame list rollover enable */
+#define	INTR_PCE	BIT(2)	/* port change detect enable */
+#define	INTR_UEE	BIT(1)	/* USB error interrupt enable */
+#define	INTR_UE		BIT(0)	/* USB interrupt enable */
+	u32	frindex;	/* frame index */
+#define	FRINDEX_MASK	(0x3fff << 0)
+	u32	ctrldssegment;	/* not used */
+	u32	deviceaddr;
+#define USBADR_SHIFT	25
+#define	USBADR(d)	\
+	(((d)>>25)&0x7f)	/* bits 31:25, device address */
+#define USBADR_MASK	(0x7f << 25)
+#define	USBADRA		BIT(24)	/* device address advance */
+	u32	endpointlistaddr;/* endpoint list top memory address */
+/* bits 31:11, endpoint list pointer */
+#define	EPBASE(d)	(((d)>>11)&0x1fffff)
+#define	ENDPOINTLISTADDR_MASK	(0x1fffff << 11)
+	u32	ttctrl;		/* H: TT operatin, not used */
+	/* offset: 0x50 */
+	u32	burstsize;	/* burst size of data movement */
+#define	TXPBURST(b)	\
+	(((b)>>8)&0xff)		/* bits 15:8, TX burst length */
+#define	RXPBURST(b)	\
+	(((b)>>0)&0xff)		/* bits 7:0, RX burst length */
+	u32	txfilltuning;	/* TX tuning */
+	u32	txttfilltuning;	/* H: TX TT tuning */
+	u32	ic_usb;		/* control the IC_USB FS/LS transceiver */
+	/* offset: 0x60 */
+	u32	ulpi_viewport;	/* indirect access to ULPI PHY */
+#define	ULPIWU		BIT(31)	/* ULPI wakeup */
+#define	ULPIRUN		BIT(30)	/* ULPI read/write run */
+#define	ULPIRW		BIT(29)	/* ULPI read/write control */
+#define	ULPISS		BIT(27)	/* ULPI sync state */
+#define	ULPIPORT(u)	\
+	(((u)>>24)&7)		/* bits 26:24, ULPI port number */
+#define	ULPIADDR(u)	\
+	(((u)>>16)&0xff)	/* bits 23:16, ULPI data address */
+#define	ULPIDATRD(u)	\
+	(((u)>>8)&0xff)		/* bits 15:8, ULPI data read */
+#define	ULPIDATWR(u)	\
+	(((u)>>0)&0xff)		/* bits 7:0, ULPI date write */
+	u8	_reserved6[0x70-0x64];
+	/* offset: 0x70 */
+	u32	configflag;	/* H: not used */
+	u32	portsc1;	/* port status */
+#define	DA(p)	\
+	(((p)>>25)&0x7f)	/* bits 31:25, device address */
+#define	PORTS_SSTS	(BIT(24) | BIT(23))	/* suspend status */
+#define	PORTS_WKOC	BIT(22)	/* wake on over-current enable */
+#define	PORTS_WKDS	BIT(21)	/* wake on disconnect enable */
+#define	PORTS_WKCN	BIT(20)	/* wake on connect enable */
+#define	PORTS_PTC(p)	(((p)>>16)&0xf)	/* bits 19:16, port test control */
+#define	PORTS_PIC	(BIT(15) | BIT(14))	/* port indicator control */
+#define	PORTS_PO	BIT(13)	/* port owner */
+#define	PORTS_PP	BIT(12)	/* port power */
+#define	PORTS_LS	(BIT(11) | BIT(10)) 	/* line status */
+#define	PORTS_SLP	BIT(9)	/* suspend using L1 */
+#define	PORTS_PR	BIT(8)	/* port reset */
+#define	PORTS_SUSP	BIT(7)	/* suspend */
+#define	PORTS_FPR	BIT(6)	/* force port resume */
+#define	PORTS_OCC	BIT(5)	/* over-current change */
+#define	PORTS_OCA	BIT(4)	/* over-current active */
+#define	PORTS_PEC	BIT(3)	/* port enable/disable change */
+#define	PORTS_PE	BIT(2)	/* port enable/disable */
+#define	PORTS_CSC	BIT(1)	/* connect status change */
+#define	PORTS_CCS	BIT(0)	/* current connect status */
+	u8	_reserved7[0xb4-0x78];
+	/* offset: 0xb4 */
+	u32	devlc;		/* control LPM and each USB port behavior */
+/* bits 31:29, parallel transceiver select */
+#define	LPM_PTS(d)	(((d)>>29)&7)
+#define	LPM_STS		BIT(28)	/* serial transceiver select */
+#define	LPM_PTW		BIT(27)	/* parallel transceiver width */
+#define	LPM_PSPD(d)	(((d)>>25)&3)	/* bits 26:25, port speed */
+#define LPM_PSPD_MASK	(BIT(26) | BIT(25))
+#define LPM_SPEED_FULL	0
+#define LPM_SPEED_LOW	1
+#define LPM_SPEED_HIGH	2
+#define	LPM_SRT		BIT(24)	/* shorten reset time */
+#define	LPM_PFSC	BIT(23)	/* port force full speed connect */
+#define	LPM_PHCD	BIT(22) /* PHY low power suspend clock disable */
+#define	LPM_STL		BIT(16)	/* STALL reply to LPM token */
+#define	LPM_BA(d)	\
+	(((d)>>1)&0x7ff)	/* bits 11:1, BmAttributes */
+#define	LPM_NYT_ACK	BIT(0)	/* NYET/ACK reply to LPM token */
+	u8	_reserved8[0xf4-0xb8];
+	/* offset: 0xf4 */
+	u32	otgsc;		/* On-The-Go status and control */
+#define	OTGSC_DPIE	BIT(30)	/* data pulse interrupt enable */
+#define	OTGSC_MSE	BIT(29)	/* 1 ms timer interrupt enable */
+#define	OTGSC_BSEIE	BIT(28)	/* B session end interrupt enable */
+#define	OTGSC_BSVIE	BIT(27)	/* B session valid interrupt enable */
+#define	OTGSC_ASVIE	BIT(26)	/* A session valid interrupt enable */
+#define	OTGSC_AVVIE	BIT(25)	/* A VBUS valid interrupt enable */
+#define	OTGSC_IDIE	BIT(24)	/* USB ID interrupt enable */
+#define	OTGSC_DPIS	BIT(22)	/* data pulse interrupt status */
+#define	OTGSC_MSS	BIT(21)	/* 1 ms timer interrupt status */
+#define	OTGSC_BSEIS	BIT(20)	/* B session end interrupt status */
+#define	OTGSC_BSVIS	BIT(19)	/* B session valid interrupt status */
+#define	OTGSC_ASVIS	BIT(18)	/* A session valid interrupt status */
+#define	OTGSC_AVVIS	BIT(17)	/* A VBUS valid interrupt status */
+#define	OTGSC_IDIS	BIT(16)	/* USB ID interrupt status */
+#define	OTGSC_DPS	BIT(14)	/* data bus pulsing status */
+#define	OTGSC_MST	BIT(13)	/* 1 ms timer toggle */
+#define	OTGSC_BSE	BIT(12)	/* B session end */
+#define	OTGSC_BSV	BIT(11)	/* B session valid */
+#define	OTGSC_ASV	BIT(10)	/* A session valid */
+#define	OTGSC_AVV	BIT(9)	/* A VBUS valid */
+#define	OTGSC_USBID	BIT(8)	/* USB ID */
+#define	OTGSC_HABA	BIT(7)	/* hw assist B-disconnect to A-connect */
+#define	OTGSC_HADP	BIT(6)	/* hw assist data pulse */
+#define	OTGSC_IDPU	BIT(5)	/* ID pullup */
+#define	OTGSC_DP	BIT(4)	/* data pulsing */
+#define	OTGSC_OT	BIT(3)	/* OTG termination */
+#define	OTGSC_HAAR	BIT(2)	/* hw assist auto reset */
+#define	OTGSC_VC	BIT(1)	/* VBUS charge */
+#define	OTGSC_VD	BIT(0)	/* VBUS discharge */
+	u32	usbmode;
+#define	MODE_VBPS	BIT(5)	/* R/W VBUS power select */
+#define	MODE_SDIS	BIT(4)	/* R/W stream disable mode */
+#define	MODE_SLOM	BIT(3)	/* R/W setup lockout mode */
+#define	MODE_ENSE	BIT(2)	/* endian select */
+#define	MODE_CM(u)	(((u)>>0)&3)	/* bits 1:0, controller mode */
+#define	MODE_IDLE	0
+#define	MODE_DEVICE	2
+#define	MODE_HOST	3
+	u8	_reserved9[0x100-0xfc];
+	/* offset: 0x100 */
+	u32	endptnak;
+#define	EPTN(e)		\
+	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK */
+#define	EPRN(e)		\
+	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK */
+	u32	endptnaken;
+#define	EPTNE(e)	\
+	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK enable */
+#define	EPRNE(e)	\
+	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK enable */
+	u32	endptsetupstat;
+#define	SETUPSTAT_MASK		(0xffff << 0)	/* bits 15:0 */
+#define EP0SETUPSTAT_MASK	1
+	u32	endptprime;
+/* bits 31:16, prime endpoint transmit buffer */
+#define	PETB(e)		(((e)>>16)&0xffff)
+/* bits 15:0, prime endpoint receive buffer */
+#define	PERB(e)		(((e)>>0)&0xffff)
+	/* offset: 0x110 */
+	u32	endptflush;
+/* bits 31:16, flush endpoint transmit buffer */
+#define	FETB(e)		(((e)>>16)&0xffff)
+/* bits 15:0, flush endpoint receive buffer */
+#define	FERB(e)		(((e)>>0)&0xffff)
+	u32	endptstat;
+/* bits 31:16, endpoint transmit buffer ready */
+#define	ETBR(e)		(((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive buffer ready */
+#define	ERBR(e)		(((e)>>0)&0xffff)
+	u32	endptcomplete;
+/* bits 31:16, endpoint transmit complete event */
+#define	ETCE(e)		(((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive complete event */
+#define	ERCE(e)		(((e)>>0)&0xffff)
+	/* offset: 0x11c */
+	u32	endptctrl[16];
+#define	EPCTRL_TXE	BIT(23)	/* TX endpoint enable */
+#define	EPCTRL_TXR	BIT(22)	/* TX data toggle reset */
+#define	EPCTRL_TXI	BIT(21)	/* TX data toggle inhibit */
+#define	EPCTRL_TXT(e)	(((e)>>18)&3)	/* bits 19:18, TX endpoint type */
+#define	EPCTRL_TXT_SHIFT	18
+#define	EPCTRL_TXD	BIT(17)	/* TX endpoint data source */
+#define	EPCTRL_TXS	BIT(16)	/* TX endpoint STALL */
+#define	EPCTRL_RXE	BIT(7)	/* RX endpoint enable */
+#define	EPCTRL_RXR	BIT(6)	/* RX data toggle reset */
+#define	EPCTRL_RXI	BIT(5)	/* RX data toggle inhibit */
+#define	EPCTRL_RXT(e)	(((e)>>2)&3)	/* bits 3:2, RX endpoint type */
+#define	EPCTRL_RXT_SHIFT	2	/* bits 19:18, TX endpoint type */
+#define	EPCTRL_RXD	BIT(1)	/* RX endpoint data sink */
+#define	EPCTRL_RXS	BIT(0)	/* RX endpoint STALL */
+} __attribute__ ((packed));
+
+#endif /* __LANGWELL_UDC_H */
+
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 1aaa826396a..2443c0e7a80 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -80,10 +80,10 @@ struct otg_transceiver {
 
 /* for board-specific init logic */
 extern int otg_set_transceiver(struct otg_transceiver *);
-#ifdef CONFIG_NOP_USB_XCEIV
+
+/* sometimes transceivers are accessed only through e.g. ULPI */
 extern void usb_nop_xceiv_register(void);
 extern void usb_nop_xceiv_unregister(void);
-#endif
 
 
 /* for usb host and peripheral controller drivers */
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
new file mode 100644
index 00000000000..e9f0384fa20
--- /dev/null
+++ b/include/linux/usb/r8a66597.h
@@ -0,0 +1,44 @@
+/*
+ * R8A66597 driver platform data
+ *
+ * Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __LINUX_USB_R8A66597_H
+#define __LINUX_USB_R8A66597_H
+
+#define R8A66597_PLATDATA_XTAL_12MHZ	0x01
+#define R8A66597_PLATDATA_XTAL_24MHZ	0x02
+#define R8A66597_PLATDATA_XTAL_48MHZ	0x03
+
+struct r8a66597_platdata {
+	/* This ops can controll port power instead of DVSTCTR register. */
+	void (*port_power)(int port, int power);
+
+	/* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
+	unsigned	xtal:2;
+
+	/* set one = 3.3V, set zero = 1.5V */
+	unsigned	vif:1;
+
+	/* set one = big endian, set zero = little endian */
+	unsigned	endian:1;
+};
+#endif
+
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 8cdfed738fe..44801d26a37 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -15,6 +15,7 @@
 
 #include <linux/kref.h>
 #include <linux/mutex.h>
+#include <linux/sysrq.h>
 
 #define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
 #define SERIAL_TTY_MINORS	254	/* loads of devices :) */
@@ -26,6 +27,13 @@
 /* parity check flag */
 #define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
 
+enum port_dev_state {
+	PORT_UNREGISTERED,
+	PORT_REGISTERING,
+	PORT_REGISTERED,
+	PORT_UNREGISTERING,
+};
+
 /**
  * usb_serial_port: structure for the specific ports of a device.
  * @serial: pointer back to the struct usb_serial owner of this port.
@@ -91,12 +99,17 @@ struct usb_serial_port {
 	int			write_urb_busy;
 	__u8			bulk_out_endpointAddress;
 
+	int			tx_bytes_flight;
+	int			urbs_in_flight;
+
 	wait_queue_head_t	write_wait;
 	struct work_struct	work;
 	char			throttled;
 	char			throttle_req;
 	char			console;
+	unsigned long		sysrq; /* sysrq timeout */
 	struct device		dev;
+	enum port_dev_state	dev_state;
 };
 #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
 
@@ -181,8 +194,10 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  *	This will be called when the struct usb_serial structure is fully set
  *	set up.  Do any local initialization of the device, or any private
  *	memory structure allocation at this point in time.
- * @shutdown: pointer to the driver's shutdown function.  This will be
- *	called when the device is removed from the system.
+ * @disconnect: pointer to the driver's disconnect function.  This will be
+ *	called when the device is unplugged or unbound from the driver.
+ * @release: pointer to the driver's release function.  This will be called
+ *	when the usb_serial data structure is about to be destroyed.
  * @usb_driver: pointer to the struct usb_driver that controls this
  *	device.  This is necessary to allow dynamic ids to be added to
  *	the driver from sysfs.
@@ -207,12 +222,14 @@ struct usb_serial_driver {
 	struct device_driver	driver;
 	struct usb_driver	*usb_driver;
 	struct usb_dynids	dynids;
+	int			max_in_flight_urbs;
 
 	int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
 	int (*attach)(struct usb_serial *serial);
 	int (*calc_num_ports) (struct usb_serial *serial);
 
-	void (*shutdown)(struct usb_serial *serial);
+	void (*disconnect)(struct usb_serial *serial);
+	void (*release)(struct usb_serial *serial);
 
 	int (*port_probe)(struct usb_serial_port *port);
 	int (*port_remove)(struct usb_serial_port *port);
@@ -294,9 +311,16 @@ extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_throttle(struct tty_struct *tty);
 extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
-extern void usb_serial_generic_shutdown(struct usb_serial *serial);
+extern void usb_serial_generic_disconnect(struct usb_serial *serial);
+extern void usb_serial_generic_release(struct usb_serial *serial);
 extern int usb_serial_generic_register(int debug);
 extern void usb_serial_generic_deregister(void);
+extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
+						 gfp_t mem_flags);
+extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+					unsigned int ch);
+extern int usb_serial_handle_break(struct usb_serial_port *port);
+
 
 extern int usb_serial_bus_register(struct usb_serial_driver *device);
 extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 36fabb95c7d..5d44059f6d6 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -183,6 +183,7 @@ extern void usbnet_tx_timeout (struct net_device *net);
 extern int usbnet_change_mtu (struct net_device *net, int new_mtu);
 
 extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern int usbnet_get_ethernet_addr(struct usbnet *, int);
 extern void usbnet_defer_kevent (struct usbnet *, int);
 extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
 extern void usbnet_unlink_rx_urbs(struct usbnet *);
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index 11232676bff..3656b300de3 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -22,12 +22,12 @@ struct old_utsname {
 };
 
 struct new_utsname {
-	char sysname[65];
-	char nodename[65];
-	char release[65];
-	char version[65];
-	char machine[65];
-	char domainname[65];
+	char sysname[__NEW_UTS_LEN + 1];
+	char nodename[__NEW_UTS_LEN + 1];
+	char release[__NEW_UTS_LEN + 1];
+	char version[__NEW_UTS_LEN + 1];
+	char machine[__NEW_UTS_LEN + 1];
+	char domainname[__NEW_UTS_LEN + 1];
 };
 
 #ifdef __KERNEL__
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index ebb2ea6b499..f24eceecc5a 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -347,7 +347,8 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
 #define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
 #define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16  YVU 4:2:2     */
+#define V4L2_PIX_FMT_YVYU     v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
diff --git a/include/linux/vlynq.h b/include/linux/vlynq.h
new file mode 100644
index 00000000000..8f6a95882b0
--- /dev/null
+++ b/include/linux/vlynq.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __VLYNQ_H__
+#define __VLYNQ_H__
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define VLYNQ_NUM_IRQS 32
+
+struct vlynq_mapping {
+	u32 size;
+	u32 offset;
+};
+
+enum vlynq_divisor {
+	vlynq_div_auto = 0,
+	vlynq_ldiv1,
+	vlynq_ldiv2,
+	vlynq_ldiv3,
+	vlynq_ldiv4,
+	vlynq_ldiv5,
+	vlynq_ldiv6,
+	vlynq_ldiv7,
+	vlynq_ldiv8,
+	vlynq_rdiv1,
+	vlynq_rdiv2,
+	vlynq_rdiv3,
+	vlynq_rdiv4,
+	vlynq_rdiv5,
+	vlynq_rdiv6,
+	vlynq_rdiv7,
+	vlynq_rdiv8,
+	vlynq_div_external
+};
+
+struct vlynq_device_id {
+	u32 id;
+	enum vlynq_divisor divisor;
+	unsigned long driver_data;
+};
+
+struct vlynq_regs;
+struct vlynq_device {
+	u32 id, dev_id;
+	int local_irq;
+	int remote_irq;
+	enum vlynq_divisor divisor;
+	u32 regs_start, regs_end;
+	u32 mem_start, mem_end;
+	u32 irq_start, irq_end;
+	int irq;
+	int enabled;
+	struct vlynq_regs *local;
+	struct vlynq_regs *remote;
+	struct device dev;
+};
+
+struct vlynq_driver {
+	char *name;
+	struct vlynq_device_id *id_table;
+	int (*probe)(struct vlynq_device *dev, struct vlynq_device_id *id);
+	void (*remove)(struct vlynq_device *dev);
+	struct device_driver driver;
+};
+
+struct plat_vlynq_ops {
+	int (*on)(struct vlynq_device *dev);
+	void (*off)(struct vlynq_device *dev);
+};
+
+static inline struct vlynq_driver *to_vlynq_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vlynq_driver, driver);
+}
+
+static inline struct vlynq_device *to_vlynq_device(struct device *device)
+{
+	return container_of(device, struct vlynq_device, dev);
+}
+
+extern struct bus_type vlynq_bus_type;
+
+extern int __vlynq_register_driver(struct vlynq_driver *driver,
+				   struct module *owner);
+
+static inline int vlynq_register_driver(struct vlynq_driver *driver)
+{
+	return __vlynq_register_driver(driver, THIS_MODULE);
+}
+
+static inline void *vlynq_get_drvdata(struct vlynq_device *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+static inline void vlynq_set_drvdata(struct vlynq_device *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+static inline u32 vlynq_mem_start(struct vlynq_device *dev)
+{
+	return dev->mem_start;
+}
+
+static inline u32 vlynq_mem_end(struct vlynq_device *dev)
+{
+	return dev->mem_end;
+}
+
+static inline u32 vlynq_mem_len(struct vlynq_device *dev)
+{
+	return dev->mem_end - dev->mem_start + 1;
+}
+
+static inline int vlynq_virq_to_irq(struct vlynq_device *dev, int virq)
+{
+	int irq = dev->irq_start + virq;
+	if ((irq < dev->irq_start) || (irq > dev->irq_end))
+		return -EINVAL;
+
+	return irq;
+}
+
+static inline int vlynq_irq_to_virq(struct vlynq_device *dev, int irq)
+{
+	if ((irq < dev->irq_start) || (irq > dev->irq_end))
+		return -EINVAL;
+
+	return irq - dev->irq_start;
+}
+
+extern void vlynq_unregister_driver(struct vlynq_driver *driver);
+extern int vlynq_enable_device(struct vlynq_device *dev);
+extern void vlynq_disable_device(struct vlynq_device *dev);
+extern int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
+				   struct vlynq_mapping *mapping);
+extern int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
+				    struct vlynq_mapping *mapping);
+extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq);
+extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq);
+
+#endif /* __VLYNQ_H__ */
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index 524cd1b28ec..81a97cf8f0a 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -36,12 +36,14 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
 		FOR_ALL_ZONES(PGSTEAL),
 		FOR_ALL_ZONES(PGSCAN_KSWAPD),
 		FOR_ALL_ZONES(PGSCAN_DIRECT),
+#ifdef CONFIG_NUMA
+		PGSCAN_ZONE_RECLAIM_FAILED,
+#endif
 		PGINODESTEAL, SLABS_SCANNED, KSWAPD_STEAL, KSWAPD_INODESTEAL,
 		PAGEOUTRUN, ALLOCSTALL, PGROTATED,
 #ifdef CONFIG_HUGETLB_PAGE
 		HTLB_BUDDY_PGALLOC, HTLB_BUDDY_PGALLOC_FAIL,
 #endif
-#ifdef CONFIG_UNEVICTABLE_LRU
 		UNEVICTABLE_PGCULLED,	/* culled to noreclaim list */
 		UNEVICTABLE_PGSCANNED,	/* scanned for reclaimability */
 		UNEVICTABLE_PGRESCUED,	/* rescued from noreclaim list */
@@ -50,7 +52,6 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
 		UNEVICTABLE_PGCLEARED,	/* on COW, page truncate */
 		UNEVICTABLE_PGSTRANDED,	/* unable to isolate on unlock */
 		UNEVICTABLE_MLOCKFREED,
-#endif
 		NR_VM_EVENT_ITEMS
 };
 
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
index c89de7f4e5b..4fdcc563551 100644
--- a/include/linux/wimax.h
+++ b/include/linux/wimax.h
@@ -59,7 +59,7 @@ enum {
 	 * M - Major: change if removing or modifying an existing call.
 	 * m - minor: change when adding a new call
 	 */
-	WIMAX_GNL_VERSION = 00,
+	WIMAX_GNL_VERSION = 01,
 	/* Generic NetLink attributes */
 	WIMAX_GNL_ATTR_INVALID = 0x00,
 	WIMAX_GNL_ATTR_MAX = 10,
@@ -78,6 +78,7 @@ enum {
 	WIMAX_GNL_OP_RFKILL,	/* Run wimax_rfkill() */
 	WIMAX_GNL_OP_RESET,	/* Run wimax_rfkill() */
 	WIMAX_GNL_RE_STATE_CHANGE,	/* Report: status change */
+	WIMAX_GNL_OP_STATE_GET,		/* Request for current state */
 };
 
 
@@ -113,6 +114,10 @@ enum {
 	WIMAX_GNL_RESET_IFIDX = 1,
 };
 
+/* Atributes for wimax_state_get() */
+enum {
+	WIMAX_GNL_STGET_IFIDX = 1,
+};
 
 /*
  * Attributes for the Report State Change
diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h
index d5148a7889a..433693ef2bb 100644
--- a/include/linux/wimax/i2400m.h
+++ b/include/linux/wimax/i2400m.h
@@ -266,7 +266,7 @@ enum i2400m_ro_type {
 
 /* Misc constants */
 enum {
-	I2400M_PL_PAD = 16,	/* Payload data size alignment */
+	I2400M_PL_ALIGN = 16,	/* Payload data size alignment */
 	I2400M_PL_SIZE_MAX = 0x3EFF,
 	I2400M_MAX_PLS_IN_MSG = 60,
 	/* protocol barkers: sync sequences; for notifications they
diff --git a/include/media/adv7343.h b/include/media/adv7343.h
new file mode 100644
index 00000000000..d6f8a4e1a1f
--- /dev/null
+++ b/include/media/adv7343.h
@@ -0,0 +1,23 @@
+/*
+ * ADV7343 header file
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ADV7343_H
+#define ADV7343_H
+
+#define ADV7343_COMPOSITE_ID	(0)
+#define ADV7343_COMPONENT_ID	(1)
+#define ADV7343_SVIDEO_ID	(2)
+
+#endif				/* End of #ifndef ADV7343_H */
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 07963d70540..3ad4ed5402f 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -7,7 +7,7 @@ struct IR_i2c;
 
 struct IR_i2c {
 	IR_KEYTAB_TYPE         *ir_codes;
-	struct i2c_client      c;
+	struct i2c_client      *c;
 	struct input_dev       *input;
 	struct ir_input_state  ir;
 
@@ -15,7 +15,15 @@ struct IR_i2c {
 	unsigned char          old;
 
 	struct delayed_work    work;
+	char                   name[32];
 	char                   phys[32];
 	int                    (*get_key)(struct IR_i2c*, u32*, u32*);
 };
+
+/* Can be passed when instantiating an ir_video i2c device */
+struct IR_i2c_init_data {
+	IR_KEYTAB_TYPE         *ir_codes;
+	const char             *name;
+	int                    (*get_key)(struct IR_i2c*, u32*, u32*);
+};
 #endif
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 37013688af4..23ecead35e7 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -60,7 +60,7 @@ struct soc_camera_file {
 
 struct soc_camera_host {
 	struct list_head list;
-	struct device dev;
+	struct device *dev;
 	unsigned char nr;				/* Host number */
 	void *priv;
 	const char *drv_name;
@@ -92,11 +92,16 @@ struct soc_camera_host_ops {
 #define SOCAM_SENSOR_INVERT_VSYNC	(1 << 3)
 #define SOCAM_SENSOR_INVERT_DATA	(1 << 4)
 
+struct i2c_board_info;
+
 struct soc_camera_link {
 	/* Camera bus id, used to match a camera and a bus */
 	int bus_id;
 	/* Per camera SOCAM_SENSOR_* bus flags */
 	unsigned long flags;
+	int i2c_adapter_id;
+	struct i2c_board_info *board_info;
+	const char *module_name;
 	/* Optional callbacks to power on or off and reset the sensor */
 	int (*power)(struct device *, int);
 	int (*reset)(struct device *);
@@ -107,6 +112,7 @@ struct soc_camera_link {
 	 */
 	int (*set_bus_param)(struct soc_camera_link *, unsigned long flags);
 	unsigned long (*query_bus_param)(struct soc_camera_link *);
+	void (*free_bus)(struct soc_camera_link *);
 };
 
 static inline struct soc_camera_device *to_soc_camera_dev(struct device *dev)
@@ -116,7 +122,7 @@ static inline struct soc_camera_device *to_soc_camera_dev(struct device *dev)
 
 static inline struct soc_camera_host *to_soc_camera_host(struct device *dev)
 {
-	return container_of(dev, struct soc_camera_host, dev);
+	return dev_get_drvdata(dev);
 }
 
 extern int soc_camera_host_register(struct soc_camera_host *ici);
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 7d4e2db7807..cbf97f45fbe 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -124,6 +124,8 @@
 #define TUNER_XC5000			76	/* Xceive Silicon Tuner */
 #define TUNER_TCL_MF02GIP_5N		77	/* TCL MF02GIP_5N */
 #define TUNER_PHILIPS_FMD1216MEX_MK3	78
+#define TUNER_PHILIPS_FM1216MK5		79
+#define TUNER_PHILIPS_FQ1216LME_MK3	80	/* Active loopthrough, no FM */
 
 /* tv card specific */
 #define TDA9887_PRESENT 		(1<<0)
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 1be461a2907..4d7e2272c42 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -137,6 +137,12 @@ enum {
 	/* module saa7191: just ident 7191 */
 	V4L2_IDENT_SAA7191 = 7191,
 
+	/* module ths7303: just ident 7303 */
+	V4L2_IDENT_THS7303 = 7303,
+
+	/* module adv7343: just ident 7343 */
+	V4L2_IDENT_ADV7343 = 7343,
+
 	/* module wm8739: just ident 8739 */
 	V4L2_IDENT_WM8739 = 8739,
 
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
index 0dd3e8e8653..5d5d550e63a 100644
--- a/include/media/v4l2-device.h
+++ b/include/media/v4l2-device.h
@@ -30,7 +30,7 @@
    basic V4L2 device-level support.
  */
 
-#define V4L2_DEVICE_NAME_SIZE (BUS_ID_SIZE + 16)
+#define V4L2_DEVICE_NAME_SIZE (20 + 16)
 
 struct v4l2_device {
 	/* dev->driver_data points to this struct.
@@ -53,10 +53,31 @@ struct v4l2_device {
    dev may be NULL in rare cases (ISA devices). In that case you
    must fill in the v4l2_dev->name field before calling this function. */
 int __must_check v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev);
+
+/* Optional function to initialize the name field of struct v4l2_device using
+   the driver name and a driver-global atomic_t instance.
+   This function will increment the instance counter and returns the instance
+   value used in the name.
+
+   Example:
+
+   static atomic_t drv_instance = ATOMIC_INIT(0);
+
+   ...
+
+   instance = v4l2_device_set_name(&v4l2_dev, "foo", &drv_instance);
+
+   The first time this is called the name field will be set to foo0 and
+   this function returns 0. If the name ends with a digit (e.g. cx18),
+   then the name will be set to cx18-0 since cx180 looks really odd. */
+int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename,
+						atomic_t *instance);
+
 /* Set v4l2_dev->dev to NULL. Call when the USB parent disconnects.
    Since the parent disappears this ensures that v4l2_dev doesn't have an
    invalid parent pointer. */
 void v4l2_device_disconnect(struct v4l2_device *v4l2_dev);
+
 /* Unregister all sub-devices and any other resources related to v4l2_dev. */
 void v4l2_device_unregister(struct v4l2_device *v4l2_dev);
 
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 17856081c80..a503e1cee78 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -230,12 +230,16 @@ struct v4l2_subdev_ops {
 
 #define V4L2_SUBDEV_NAME_SIZE 32
 
+/* Set this flag if this subdev is a i2c device. */
+#define V4L2_SUBDEV_FL_IS_I2C (1U << 0)
+
 /* Each instance of a subdev driver should create this struct, either
    stand-alone or embedded in a larger struct.
  */
 struct v4l2_subdev {
 	struct list_head list;
 	struct module *owner;
+	u32 flags;
 	struct v4l2_device *v4l2_dev;
 	const struct v4l2_subdev_ops *ops;
 	/* name must be unique */
@@ -264,6 +268,7 @@ static inline void v4l2_subdev_init(struct v4l2_subdev *sd,
 	BUG_ON(!ops || !ops->core);
 	sd->ops = ops;
 	sd->v4l2_dev = NULL;
+	sd->flags = 0;
 	sd->name[0] = '\0';
 	sd->grp_id = 0;
 	sd->priv = NULL;
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 3ad5390a4dd..968166a45f8 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -81,12 +81,6 @@ enum {
 	BT_CLOSED
 };
 
-/* Endianness conversions */
-#define htobs(a)	__cpu_to_le16(a)
-#define htobl(a)	__cpu_to_le32(a)
-#define btohs(a)	__le16_to_cpu(a)
-#define btohl(a)	__le32_to_cpu(a)
-
 /* BD Address */
 typedef struct {
 	__u8 b[6];
@@ -171,15 +165,6 @@ static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk, unsigned long l
 	return skb;
 }
 
-static inline int skb_frags_no(struct sk_buff *skb)
-{
-	register struct sk_buff *frag = skb_shinfo(skb)->frag_list;
-	register int n = 1;
-
-	for (; frag; frag=frag->next, n++);
-	return n;
-}
-
 int bt_err(__u16 code);
 
 extern int hci_sock_init(void);
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 73aead222b3..c4ca4228b08 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -137,6 +137,8 @@ struct hci_dev {
 	struct device		*parent;
 	struct device		dev;
 
+	struct rfkill		*rfkill;
+
 	struct module 		*owner;
 
 	int (*open)(struct hci_dev *hdev);
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index f566aa1f0a4..e919fca1072 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -26,8 +26,13 @@
 #define __L2CAP_H
 
 /* L2CAP defaults */
-#define L2CAP_DEFAULT_MTU	672
-#define L2CAP_DEFAULT_FLUSH_TO	0xFFFF
+#define L2CAP_DEFAULT_MTU		672
+#define L2CAP_DEFAULT_FLUSH_TO		0xffff
+#define L2CAP_DEFAULT_RX_WINDOW		1
+#define L2CAP_DEFAULT_MAX_RECEIVE	1
+#define L2CAP_DEFAULT_RETRANS_TO	300    /* 300 milliseconds */
+#define L2CAP_DEFAULT_MONITOR_TO	1000   /* 1 second */
+#define L2CAP_DEFAULT_MAX_RX_APDU	0xfff7
 
 #define L2CAP_CONN_TIMEOUT	(40000) /* 40 seconds */
 #define L2CAP_INFO_TIMEOUT	(4000)  /*  4 seconds */
@@ -64,17 +69,29 @@ struct l2cap_conninfo {
 #define L2CAP_LM_SECURE		0x0020
 
 /* L2CAP command codes */
-#define L2CAP_COMMAND_REJ 0x01
-#define L2CAP_CONN_REQ    0x02
-#define L2CAP_CONN_RSP    0x03
-#define L2CAP_CONF_REQ    0x04
-#define L2CAP_CONF_RSP    0x05
-#define L2CAP_DISCONN_REQ 0x06
-#define L2CAP_DISCONN_RSP 0x07
-#define L2CAP_ECHO_REQ    0x08
-#define L2CAP_ECHO_RSP    0x09
-#define L2CAP_INFO_REQ    0x0a
-#define L2CAP_INFO_RSP    0x0b
+#define L2CAP_COMMAND_REJ	0x01
+#define L2CAP_CONN_REQ		0x02
+#define L2CAP_CONN_RSP		0x03
+#define L2CAP_CONF_REQ		0x04
+#define L2CAP_CONF_RSP		0x05
+#define L2CAP_DISCONN_REQ	0x06
+#define L2CAP_DISCONN_RSP	0x07
+#define L2CAP_ECHO_REQ		0x08
+#define L2CAP_ECHO_RSP		0x09
+#define L2CAP_INFO_REQ		0x0a
+#define L2CAP_INFO_RSP		0x0b
+
+/* L2CAP feature mask */
+#define L2CAP_FEAT_FLOWCTL	0x00000001
+#define L2CAP_FEAT_RETRANS	0x00000002
+#define L2CAP_FEAT_ERTM		0x00000008
+#define L2CAP_FEAT_STREAMING	0x00000010
+#define L2CAP_FEAT_FCS		0x00000020
+#define L2CAP_FEAT_FIXED_CHAN	0x00000080
+
+/* L2CAP checksum option */
+#define L2CAP_FCS_NONE		0x00
+#define L2CAP_FCS_CRC16		0x01
 
 /* L2CAP structures */
 struct l2cap_hdr {
@@ -106,17 +123,23 @@ struct l2cap_conn_rsp {
 	__le16     status;
 } __attribute__ ((packed));
 
+/* channel indentifier */
+#define L2CAP_CID_SIGNALING	0x0001
+#define L2CAP_CID_CONN_LESS	0x0002
+#define L2CAP_CID_DYN_START	0x0040
+#define L2CAP_CID_DYN_END	0xffff
+
 /* connect result */
-#define L2CAP_CR_SUCCESS    0x0000
-#define L2CAP_CR_PEND       0x0001
-#define L2CAP_CR_BAD_PSM    0x0002
-#define L2CAP_CR_SEC_BLOCK  0x0003
-#define L2CAP_CR_NO_MEM     0x0004
+#define L2CAP_CR_SUCCESS	0x0000
+#define L2CAP_CR_PEND		0x0001
+#define L2CAP_CR_BAD_PSM	0x0002
+#define L2CAP_CR_SEC_BLOCK	0x0003
+#define L2CAP_CR_NO_MEM		0x0004
 
 /* connect status */
-#define L2CAP_CS_NO_INFO      0x0000
-#define L2CAP_CS_AUTHEN_PEND  0x0001
-#define L2CAP_CS_AUTHOR_PEND  0x0002
+#define L2CAP_CS_NO_INFO	0x0000
+#define L2CAP_CS_AUTHEN_PEND	0x0001
+#define L2CAP_CS_AUTHOR_PEND	0x0002
 
 struct l2cap_conf_req {
 	__le16     dcid;
@@ -143,10 +166,14 @@ struct l2cap_conf_opt {
 } __attribute__ ((packed));
 #define L2CAP_CONF_OPT_SIZE	2
 
+#define L2CAP_CONF_HINT		0x80
+#define L2CAP_CONF_MASK		0x7f
+
 #define L2CAP_CONF_MTU		0x01
 #define L2CAP_CONF_FLUSH_TO	0x02
 #define L2CAP_CONF_QOS		0x03
 #define L2CAP_CONF_RFC		0x04
+#define L2CAP_CONF_FCS		0x05
 
 #define L2CAP_CONF_MAX_SIZE	22
 
@@ -162,6 +189,8 @@ struct l2cap_conf_rfc {
 #define L2CAP_MODE_BASIC	0x00
 #define L2CAP_MODE_RETRANS	0x01
 #define L2CAP_MODE_FLOWCTL	0x02
+#define L2CAP_MODE_ERTM		0x03
+#define L2CAP_MODE_STREAM	0x04
 
 struct l2cap_disconn_req {
 	__le16     dcid;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 5389afdc129..1a21895b732 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1,71 +1,220 @@
 #ifndef __NET_CFG80211_H
 #define __NET_CFG80211_H
+/*
+ * 802.11 device and configuration interface
+ *
+ * Copyright 2006-2009	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
 
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/list.h>
 #include <linux/netlink.h>
 #include <linux/skbuff.h>
 #include <linux/nl80211.h>
 #include <linux/if_ether.h>
 #include <linux/ieee80211.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/genetlink.h>
+#include <net/regulatory.h>
+
 /* remove once we remove the wext stuff */
 #include <net/iw_handler.h>
+#include <linux/wireless.h>
+
 
 /*
- * 802.11 configuration in-kernel interface
+ * wireless hardware capability structures
+ */
+
+/**
+ * enum ieee80211_band - supported frequency bands
+ *
+ * The bands are assigned this way because the supported
+ * bitrates differ in these bands.
  *
- * Copyright 2006, 2007	Johannes Berg <johannes@sipsolutions.net>
+ * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
+ * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
  */
+enum ieee80211_band {
+	IEEE80211_BAND_2GHZ,
+	IEEE80211_BAND_5GHZ,
+
+	/* keep last */
+	IEEE80211_NUM_BANDS
+};
 
 /**
- * struct vif_params - describes virtual interface parameters
- * @mesh_id: mesh ID to use
- * @mesh_id_len: length of the mesh ID
+ * enum ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ * 	is not permitted.
+ * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ * 	is not permitted.
  */
-struct vif_params {
-       u8 *mesh_id;
-       int mesh_id_len;
+enum ieee80211_channel_flags {
+	IEEE80211_CHAN_DISABLED		= 1<<0,
+	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
+	IEEE80211_CHAN_NO_IBSS		= 1<<2,
+	IEEE80211_CHAN_RADAR		= 1<<3,
+	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
+	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
 };
 
-/* Radiotap header iteration
- *   implemented in net/wireless/radiotap.c
- *   docs in Documentation/networking/radiotap-headers.txt
+#define IEEE80211_CHAN_NO_HT40 \
+	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+
+/**
+ * struct ieee80211_channel - channel definition
+ *
+ * This structure describes a single channel for use
+ * with cfg80211.
+ *
+ * @center_freq: center frequency in MHz
+ * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
+ * @hw_value: hardware-specific value for the channel
+ * @flags: channel flags from &enum ieee80211_channel_flags.
+ * @orig_flags: channel flags at registration time, used by regulatory
+ *	code to support devices with additional restrictions
+ * @band: band this channel belongs to.
+ * @max_antenna_gain: maximum antenna gain in dBi
+ * @max_power: maximum transmission power (in dBm)
+ * @beacon_found: helper to regulatory code to indicate when a beacon
+ *	has been found on this channel. Use regulatory_hint_found_beacon()
+ *	to enable this, this is is useful only on 5 GHz band.
+ * @orig_mag: internal use
+ * @orig_mpwr: internal use
  */
+struct ieee80211_channel {
+	enum ieee80211_band band;
+	u16 center_freq;
+	u8 max_bandwidth;
+	u16 hw_value;
+	u32 flags;
+	int max_antenna_gain;
+	int max_power;
+	bool beacon_found;
+	u32 orig_flags;
+	int orig_mag, orig_mpwr;
+};
+
 /**
- * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
- * @rtheader: pointer to the radiotap header we are walking through
- * @max_length: length of radiotap header in cpu byte ordering
- * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
- * @this_arg: pointer to current radiotap arg
- * @arg_index: internal next argument index
- * @arg: internal next argument pointer
- * @next_bitmap: internal pointer to next present u32
- * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ * enum ieee80211_rate_flags - rate flags
+ *
+ * Hardware/specification flags for rates. These are structured
+ * in a way that allows using the same bitrate structure for
+ * different bands/PHY modes.
+ *
+ * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
+ *	preamble on this bitrate; only relevant in 2.4GHz band and
+ *	with CCK rates.
+ * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
+ *	when used with 802.11a (on the 5 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
+ *	when used with 802.11b (on the 2.4 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
+ *	when used with 802.11g (on the 2.4 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
  */
+enum ieee80211_rate_flags {
+	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
+	IEEE80211_RATE_MANDATORY_A	= 1<<1,
+	IEEE80211_RATE_MANDATORY_B	= 1<<2,
+	IEEE80211_RATE_MANDATORY_G	= 1<<3,
+	IEEE80211_RATE_ERP_G		= 1<<4,
+};
 
-struct ieee80211_radiotap_iterator {
-	struct ieee80211_radiotap_header *rtheader;
-	int max_length;
-	int this_arg_index;
-	u8 *this_arg;
+/**
+ * struct ieee80211_rate - bitrate definition
+ *
+ * This structure describes a bitrate that an 802.11 PHY can
+ * operate with. The two values @hw_value and @hw_value_short
+ * are only for driver use when pointers to this structure are
+ * passed around.
+ *
+ * @flags: rate-specific flags
+ * @bitrate: bitrate in units of 100 Kbps
+ * @hw_value: driver/hardware value for this rate
+ * @hw_value_short: driver/hardware value for this rate when
+ *	short preamble is used
+ */
+struct ieee80211_rate {
+	u32 flags;
+	u16 bitrate;
+	u16 hw_value, hw_value_short;
+};
 
-	int arg_index;
-	u8 *arg;
-	__le32 *next_bitmap;
-	u32 bitmap_shifter;
+/**
+ * struct ieee80211_sta_ht_cap - STA's HT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11n HT capabilities for an STA.
+ *
+ * @ht_supported: is HT supported by the STA
+ * @cap: HT capabilities map as described in 802.11n spec
+ * @ampdu_factor: Maximum A-MPDU length factor
+ * @ampdu_density: Minimum A-MPDU spacing
+ * @mcs: Supported MCS rates
+ */
+struct ieee80211_sta_ht_cap {
+	u16 cap; /* use IEEE80211_HT_CAP_ */
+	bool ht_supported;
+	u8 ampdu_factor;
+	u8 ampdu_density;
+	struct ieee80211_mcs_info mcs;
 };
 
-extern int ieee80211_radiotap_iterator_init(
-   struct ieee80211_radiotap_iterator *iterator,
-   struct ieee80211_radiotap_header *radiotap_header,
-   int max_length);
+/**
+ * struct ieee80211_supported_band - frequency band definition
+ *
+ * This structure describes a frequency band a wiphy
+ * is able to operate in.
+ *
+ * @channels: Array of channels the hardware can operate in
+ *	in this band.
+ * @band: the band this structure represents
+ * @n_channels: Number of channels in @channels
+ * @bitrates: Array of bitrates the hardware can operate with
+ *	in this band. Must be sorted to give a valid "supported
+ *	rates" IE, i.e. CCK rates first, then OFDM.
+ * @n_bitrates: Number of bitrates in @bitrates
+ */
+struct ieee80211_supported_band {
+	struct ieee80211_channel *channels;
+	struct ieee80211_rate *bitrates;
+	enum ieee80211_band band;
+	int n_channels;
+	int n_bitrates;
+	struct ieee80211_sta_ht_cap ht_cap;
+};
 
-extern int ieee80211_radiotap_iterator_next(
-   struct ieee80211_radiotap_iterator *iterator);
+/*
+ * Wireless hardware/device configuration structures and methods
+ */
 
+/**
+ * struct vif_params - describes virtual interface parameters
+ * @mesh_id: mesh ID to use
+ * @mesh_id_len: length of the mesh ID
+ */
+struct vif_params {
+       u8 *mesh_id;
+       int mesh_id_len;
+};
 
- /**
+/**
  * struct key_params - key information
  *
  * Information about a key
@@ -106,27 +255,6 @@ struct beacon_parameters {
 };
 
 /**
- * enum station_flags - station flags
- *
- * Station capability flags. Note that these must be the bits
- * according to the nl80211 flags.
- *
- * @STATION_FLAG_CHANGED: station flags were changed
- * @STATION_FLAG_AUTHORIZED: station is authorized to send frames (802.1X)
- * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- *	with short preambles
- * @STATION_FLAG_WME: station is WME/QoS capable
- * @STATION_FLAG_MFP: station uses management frame protection
- */
-enum station_flags {
-	STATION_FLAG_CHANGED		= 1<<0,
-	STATION_FLAG_AUTHORIZED		= 1<<NL80211_STA_FLAG_AUTHORIZED,
-	STATION_FLAG_SHORT_PREAMBLE	= 1<<NL80211_STA_FLAG_SHORT_PREAMBLE,
-	STATION_FLAG_WME		= 1<<NL80211_STA_FLAG_WME,
-	STATION_FLAG_MFP		= 1<<NL80211_STA_FLAG_MFP,
-};
-
-/**
  * enum plink_action - actions to perform in mesh peers
  *
  * @PLINK_ACTION_INVALID: action 0 is reserved
@@ -148,14 +276,17 @@ enum plink_actions {
  * @supported_rates: supported rates in IEEE 802.11 format
  *	(or NULL for no change)
  * @supported_rates_len: number of supported rates
- * @station_flags: station flags (see &enum station_flags)
+ * @sta_flags_mask: station flags that changed
+ *	(bitmask of BIT(NL80211_STA_FLAG_...))
+ * @sta_flags_set: station flags values
+ *	(bitmask of BIT(NL80211_STA_FLAG_...))
  * @listen_interval: listen interval or -1 for no change
  * @aid: AID or zero for no change
  */
 struct station_parameters {
 	u8 *supported_rates;
 	struct net_device *vlan;
-	u32 station_flags;
+	u32 sta_flags_mask, sta_flags_set;
 	int listen_interval;
 	u16 aid;
 	u8 supported_rates_len;
@@ -348,92 +479,6 @@ struct bss_parameters {
 	u8 basic_rates_len;
 };
 
-/**
- * enum environment_cap - Environment parsed from country IE
- * @ENVIRON_ANY: indicates country IE applies to both indoor and
- *	outdoor operation.
- * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
- * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
- */
-enum environment_cap {
-	ENVIRON_ANY,
-	ENVIRON_INDOOR,
-	ENVIRON_OUTDOOR,
-};
-
-/**
- * struct regulatory_request - used to keep track of regulatory requests
- *
- * @wiphy_idx: this is set if this request's initiator is
- * 	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
- * 	can be used by the wireless core to deal with conflicts
- * 	and potentially inform users of which devices specifically
- * 	cased the conflicts.
- * @initiator: indicates who sent this request, could be any of
- * 	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
- * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
- * 	regulatory domain. We have a few special codes:
- * 	00 - World regulatory domain
- * 	99 - built by driver but a specific alpha2 cannot be determined
- * 	98 - result of an intersection between two regulatory domains
- * @intersect: indicates whether the wireless core should intersect
- * 	the requested regulatory domain with the presently set regulatory
- * 	domain.
- * @country_ie_checksum: checksum of the last processed and accepted
- * 	country IE
- * @country_ie_env: lets us know if the AP is telling us we are outdoor,
- * 	indoor, or if it doesn't matter
- * @list: used to insert into the reg_requests_list linked list
- */
-struct regulatory_request {
-	int wiphy_idx;
-	enum nl80211_reg_initiator initiator;
-	char alpha2[2];
-	bool intersect;
-	u32 country_ie_checksum;
-	enum environment_cap country_ie_env;
-	struct list_head list;
-};
-
-struct ieee80211_freq_range {
-	u32 start_freq_khz;
-	u32 end_freq_khz;
-	u32 max_bandwidth_khz;
-};
-
-struct ieee80211_power_rule {
-	u32 max_antenna_gain;
-	u32 max_eirp;
-};
-
-struct ieee80211_reg_rule {
-	struct ieee80211_freq_range freq_range;
-	struct ieee80211_power_rule power_rule;
-	u32 flags;
-};
-
-struct ieee80211_regdomain {
-	u32 n_reg_rules;
-	char alpha2[2];
-	struct ieee80211_reg_rule reg_rules[];
-};
-
-#define MHZ_TO_KHZ(freq) ((freq) * 1000)
-#define KHZ_TO_MHZ(freq) ((freq) / 1000)
-#define DBI_TO_MBI(gain) ((gain) * 100)
-#define MBI_TO_DBI(gain) ((gain) / 100)
-#define DBM_TO_MBM(gain) ((gain) * 100)
-#define MBM_TO_DBM(gain) ((gain) / 100)
-
-#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \
-	.freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
-	.freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
-	.freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
-	.power_rule.max_antenna_gain = DBI_TO_MBI(gain), \
-	.power_rule.max_eirp = DBM_TO_MBM(eirp), \
-	.flags = reg_flags, \
-	}
-
 struct mesh_config {
 	/* Timeouts in ms */
 	/* Mesh plink management parameters */
@@ -504,7 +549,7 @@ struct cfg80211_scan_request {
 	int n_ssids;
 	struct ieee80211_channel **channels;
 	u32 n_channels;
-	u8 *ie;
+	const u8 *ie;
 	size_t ie_len;
 
 	/* internal */
@@ -612,6 +657,11 @@ struct cfg80211_auth_request {
  * @ssid_len: Length of ssid in octets
  * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
  * @ie_len: Length of ie buffer in octets
+ * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
+ * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
+ *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ *	required to assume that the port is unauthorized until authorized by
+ *	user space. Otherwise, port is marked authorized by default.
  */
 struct cfg80211_assoc_request {
 	struct ieee80211_channel *chan;
@@ -620,6 +670,8 @@ struct cfg80211_assoc_request {
 	size_t ssid_len;
 	const u8 *ie;
 	size_t ie_len;
+	bool use_mfp;
+	bool control_port;
 };
 
 /**
@@ -659,6 +711,60 @@ struct cfg80211_disassoc_request {
 };
 
 /**
+ * struct cfg80211_ibss_params - IBSS parameters
+ *
+ * This structure defines the IBSS parameters for the join_ibss()
+ * method.
+ *
+ * @ssid: The SSID, will always be non-null.
+ * @ssid_len: The length of the SSID, will always be non-zero.
+ * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
+ *	search for IBSSs with a different BSSID.
+ * @channel: The channel to use if no IBSS can be found to join.
+ * @channel_fixed: The channel should be fixed -- do not search for
+ *	IBSSs to join on other channels.
+ * @ie: information element(s) to include in the beacon
+ * @ie_len: length of that
+ * @beacon_interval: beacon interval to use
+ */
+struct cfg80211_ibss_params {
+	u8 *ssid;
+	u8 *bssid;
+	struct ieee80211_channel *channel;
+	u8 *ie;
+	u8 ssid_len, ie_len;
+	u16 beacon_interval;
+	bool channel_fixed;
+};
+
+/**
+ * enum wiphy_params_flags - set_wiphy_params bitfield values
+ * WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
+ * WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
+ * WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
+ * WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
+ */
+enum wiphy_params_flags {
+	WIPHY_PARAM_RETRY_SHORT		= 1 << 0,
+	WIPHY_PARAM_RETRY_LONG		= 1 << 1,
+	WIPHY_PARAM_FRAG_THRESHOLD	= 1 << 2,
+	WIPHY_PARAM_RTS_THRESHOLD	= 1 << 3,
+};
+
+/**
+ * enum tx_power_setting - TX power adjustment
+ *
+ * @TX_POWER_AUTOMATIC: the dbm parameter is ignored
+ * @TX_POWER_LIMITED: limit TX power by the dbm parameter
+ * @TX_POWER_FIXED: fix TX power to the dbm parameter
+ */
+enum tx_power_setting {
+	TX_POWER_AUTOMATIC,
+	TX_POWER_LIMITED,
+	TX_POWER_FIXED,
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -688,10 +794,11 @@ struct cfg80211_disassoc_request {
  * @get_key: get information about the key with the given parameters.
  *	@mac_addr will be %NULL when requesting information for a group
  *	key. All pointers given to the @callback function need not be valid
- *	after it returns.
+ *	after it returns. This function should return an error if it is
+ *	not possible to retrieve the key, -ENOENT if it doesn't exist.
  *
  * @del_key: remove a key given the @mac_addr (%NULL for a group key)
- *	and @key_index
+ *	and @key_index, return -ENOENT if the key doesn't exist.
  *
  * @set_default_key: set the default key on an interface
  *
@@ -733,6 +840,23 @@ struct cfg80211_disassoc_request {
  * @assoc: Request to (re)associate with the specified peer
  * @deauth: Request to deauthenticate from the specified peer
  * @disassoc: Request to disassociate from the specified peer
+ *
+ * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
+ *	cfg80211_ibss_joined(), also call that function when changing BSSID due
+ *	to a merge.
+ * @leave_ibss: Leave the IBSS.
+ *
+ * @set_wiphy_params: Notify that wiphy parameters have changed;
+ *	@changed bitfield (see &enum wiphy_params_flags) describes which values
+ *	have changed. The actual parameter values are available in
+ *	struct wiphy. If returning an error, no value should be changed.
+ *
+ * @set_tx_power: set the transmit power according to the parameters
+ * @get_tx_power: store the current TX power into the dbm variable;
+ *	return 0 if successful
+ *
+ * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
+ *	functions to adjust rfkill hw state
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy);
@@ -747,13 +871,13 @@ struct cfg80211_ops {
 				       struct vif_params *params);
 
 	int	(*add_key)(struct wiphy *wiphy, struct net_device *netdev,
-			   u8 key_index, u8 *mac_addr,
+			   u8 key_index, const u8 *mac_addr,
 			   struct key_params *params);
 	int	(*get_key)(struct wiphy *wiphy, struct net_device *netdev,
-			   u8 key_index, u8 *mac_addr, void *cookie,
+			   u8 key_index, const u8 *mac_addr, void *cookie,
 			   void (*callback)(void *cookie, struct key_params*));
 	int	(*del_key)(struct wiphy *wiphy, struct net_device *netdev,
-			   u8 key_index, u8 *mac_addr);
+			   u8 key_index, const u8 *mac_addr);
 	int	(*set_default_key)(struct wiphy *wiphy,
 				   struct net_device *netdev,
 				   u8 key_index);
@@ -818,9 +942,473 @@ struct cfg80211_ops {
 			  struct cfg80211_deauth_request *req);
 	int	(*disassoc)(struct wiphy *wiphy, struct net_device *dev,
 			    struct cfg80211_disassoc_request *req);
+
+	int	(*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
+			     struct cfg80211_ibss_params *params);
+	int	(*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
+
+	int	(*set_tx_power)(struct wiphy *wiphy,
+				enum tx_power_setting type, int dbm);
+	int	(*get_tx_power)(struct wiphy *wiphy, int *dbm);
+
+	void	(*rfkill_poll)(struct wiphy *wiphy);
 };
 
-/* temporary wext handlers */
+/*
+ * wireless hardware and networking interfaces structures
+ * and registration/helper functions
+ */
+
+/**
+ * struct wiphy - wireless hardware description
+ * @idx: the wiphy index assigned to this item
+ * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
+ * @custom_regulatory: tells us the driver for this device
+ * 	has its own custom regulatory domain and cannot identify the
+ * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
+ * 	we will disregard the first regulatory hint (when the
+ * 	initiator is %REGDOM_SET_BY_CORE).
+ * @strict_regulatory: tells us the driver for this device will ignore
+ * 	regulatory domain settings until it gets its own regulatory domain
+ * 	via its regulatory_hint(). After its gets its own regulatory domain
+ * 	it will only allow further regulatory domain settings to further
+ * 	enhance compliance. For example if channel 13 and 14 are disabled
+ * 	by this regulatory domain no user regulatory domain can enable these
+ * 	channels at a later time. This can be used for devices which do not
+ * 	have calibration information gauranteed for frequencies or settings
+ * 	outside of its regulatory domain.
+ * @reg_notifier: the driver's regulatory notification callback
+ * @regd: the driver's regulatory domain, if one was requested via
+ * 	the regulatory_hint() API. This can be used by the driver
+ *	on the reg_notifier() if it chooses to ignore future
+ *	regulatory domain changes caused by other drivers.
+ * @signal_type: signal type reported in &struct cfg80211_bss.
+ * @cipher_suites: supported cipher suites
+ * @n_cipher_suites: number of supported cipher suites
+ * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
+ * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
+ * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
+ *	-1 = fragmentation disabled, only odd values >= 256 used
+ * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
+ */
+struct wiphy {
+	/* assign these fields before you register the wiphy */
+
+	/* permanent MAC address */
+	u8 perm_addr[ETH_ALEN];
+
+	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
+	u16 interface_modes;
+
+	bool custom_regulatory;
+	bool strict_regulatory;
+
+	enum cfg80211_signal_type signal_type;
+
+	int bss_priv_size;
+	u8 max_scan_ssids;
+	u16 max_scan_ie_len;
+
+	int n_cipher_suites;
+	const u32 *cipher_suites;
+
+	u8 retry_short;
+	u8 retry_long;
+	u32 frag_threshold;
+	u32 rts_threshold;
+
+	/* If multiple wiphys are registered and you're handed e.g.
+	 * a regular netdev with assigned ieee80211_ptr, you won't
+	 * know whether it points to a wiphy your driver has registered
+	 * or not. Assign this to something global to your driver to
+	 * help determine whether you own this wiphy or not. */
+	const void *privid;
+
+	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
+
+	/* Lets us get back the wiphy on the callback */
+	int (*reg_notifier)(struct wiphy *wiphy,
+			    struct regulatory_request *request);
+
+	/* fields below are read-only, assigned by cfg80211 */
+
+	const struct ieee80211_regdomain *regd;
+
+	/* the item in /sys/class/ieee80211/ points to this,
+	 * you need use set_wiphy_dev() (see below) */
+	struct device dev;
+
+	/* dir in debugfs: ieee80211/<wiphyname> */
+	struct dentry *debugfsdir;
+
+	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+/**
+ * wiphy_priv - return priv from wiphy
+ *
+ * @wiphy: the wiphy whose priv pointer to return
+ */
+static inline void *wiphy_priv(struct wiphy *wiphy)
+{
+	BUG_ON(!wiphy);
+	return &wiphy->priv;
+}
+
+/**
+ * set_wiphy_dev - set device pointer for wiphy
+ *
+ * @wiphy: The wiphy whose device to bind
+ * @dev: The device to parent it to
+ */
+static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
+{
+	wiphy->dev.parent = dev;
+}
+
+/**
+ * wiphy_dev - get wiphy dev pointer
+ *
+ * @wiphy: The wiphy whose device struct to look up
+ */
+static inline struct device *wiphy_dev(struct wiphy *wiphy)
+{
+	return wiphy->dev.parent;
+}
+
+/**
+ * wiphy_name - get wiphy name
+ *
+ * @wiphy: The wiphy whose name to return
+ */
+static inline const char *wiphy_name(struct wiphy *wiphy)
+{
+	return dev_name(&wiphy->dev);
+}
+
+/**
+ * wiphy_new - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * The returned pointer must be assigned to each netdev's
+ * ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
+
+/**
+ * wiphy_register - register a wiphy with cfg80211
+ *
+ * @wiphy: The wiphy to register.
+ *
+ * Returns a non-negative wiphy index or a negative error code.
+ */
+extern int wiphy_register(struct wiphy *wiphy);
+
+/**
+ * wiphy_unregister - deregister a wiphy from cfg80211
+ *
+ * @wiphy: The wiphy to unregister.
+ *
+ * After this call, no more requests can be made with this priv
+ * pointer, but the call may sleep to wait for an outstanding
+ * request that is being handled.
+ */
+extern void wiphy_unregister(struct wiphy *wiphy);
+
+/**
+ * wiphy_free - free wiphy
+ *
+ * @wiphy: The wiphy to free
+ */
+extern void wiphy_free(struct wiphy *wiphy);
+
+/**
+ * struct wireless_dev - wireless per-netdev state
+ *
+ * This structure must be allocated by the driver/stack
+ * that uses the ieee80211_ptr field in struct net_device
+ * (this is intentional so it can be allocated along with
+ * the netdev.)
+ *
+ * @wiphy: pointer to hardware description
+ * @iftype: interface type
+ * @list: (private) Used to collect the interfaces
+ * @netdev: (private) Used to reference back to the netdev
+ * @current_bss: (private) Used by the internal configuration code
+ * @bssid: (private) Used by the internal configuration code
+ * @ssid: (private) Used by the internal configuration code
+ * @ssid_len: (private) Used by the internal configuration code
+ * @wext: (private) Used by the internal wireless extensions compat code
+ * @wext_bssid: (private) Used by the internal wireless extensions compat code
+ */
+struct wireless_dev {
+	struct wiphy *wiphy;
+	enum nl80211_iftype iftype;
+
+	/* private to the generic wireless code */
+	struct list_head list;
+	struct net_device *netdev;
+
+	/* currently used for IBSS - might be rearranged in the future */
+	struct cfg80211_bss *current_bss;
+	u8 bssid[ETH_ALEN];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len;
+
+#ifdef CONFIG_WIRELESS_EXT
+	/* wext data */
+	struct {
+		struct cfg80211_ibss_params ibss;
+		u8 bssid[ETH_ALEN];
+		s8 default_key, default_mgmt_key;
+	} wext;
+#endif
+};
+
+/**
+ * wdev_priv - return wiphy priv from wireless_dev
+ *
+ * @wdev: The wireless device whose wiphy's priv pointer to return
+ */
+static inline void *wdev_priv(struct wireless_dev *wdev)
+{
+	BUG_ON(!wdev);
+	return wiphy_priv(wdev->wiphy);
+}
+
+/*
+ * Utility functions
+ */
+
+/**
+ * ieee80211_channel_to_frequency - convert channel number to frequency
+ */
+extern int ieee80211_channel_to_frequency(int chan);
+
+/**
+ * ieee80211_frequency_to_channel - convert frequency to channel number
+ */
+extern int ieee80211_frequency_to_channel(int freq);
+
+/*
+ * Name indirection necessary because the ieee80211 code also has
+ * a function named "ieee80211_get_channel", so if you include
+ * cfg80211's header file you get cfg80211's version, if you try
+ * to include both header files you'll (rightfully!) get a symbol
+ * clash.
+ */
+extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
+							 int freq);
+/**
+ * ieee80211_get_channel - get channel struct from wiphy for specified frequency
+ */
+static inline struct ieee80211_channel *
+ieee80211_get_channel(struct wiphy *wiphy, int freq)
+{
+	return __ieee80211_get_channel(wiphy, freq);
+}
+
+/**
+ * ieee80211_get_response_rate - get basic rate for a given rate
+ *
+ * @sband: the band to look for rates in
+ * @basic_rates: bitmap of basic rates
+ * @bitrate: the bitrate for which to find the basic rate
+ *
+ * This function returns the basic rate corresponding to a given
+ * bitrate, that is the next lower bitrate contained in the basic
+ * rate map, which is, for this function, given as a bitmap of
+ * indices of rates in the band's bitrate table.
+ */
+struct ieee80211_rate *
+ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
+			    u32 basic_rates, int bitrate);
+
+/*
+ * Radiotap parsing functions -- for controlled injection support
+ *
+ * Implemented in net/wireless/radiotap.c
+ * Documentation in Documentation/networking/radiotap-headers.txt
+ */
+
+/**
+ * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
+ * @rtheader: pointer to the radiotap header we are walking through
+ * @max_length: length of radiotap header in cpu byte ordering
+ * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg
+ * @this_arg: pointer to current radiotap arg
+ * @arg_index: internal next argument index
+ * @arg: internal next argument pointer
+ * @next_bitmap: internal pointer to next present u32
+ * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ */
+
+struct ieee80211_radiotap_iterator {
+	struct ieee80211_radiotap_header *rtheader;
+	int max_length;
+	int this_arg_index;
+	u8 *this_arg;
+
+	int arg_index;
+	u8 *arg;
+	__le32 *next_bitmap;
+	u32 bitmap_shifter;
+};
+
+extern int ieee80211_radiotap_iterator_init(
+   struct ieee80211_radiotap_iterator *iterator,
+   struct ieee80211_radiotap_header *radiotap_header,
+   int max_length);
+
+extern int ieee80211_radiotap_iterator_next(
+   struct ieee80211_radiotap_iterator *iterator);
+
+extern const unsigned char rfc1042_header[6];
+extern const unsigned char bridge_tunnel_header[6];
+
+/**
+ * ieee80211_get_hdrlen_from_skb - get header length from data
+ *
+ * Given an skb with a raw 802.11 header at the data pointer this function
+ * returns the 802.11 header length in bytes (not including encryption
+ * headers). If the data in the sk_buff is too short to contain a valid 802.11
+ * header the function returns 0.
+ *
+ * @skb: the frame
+ */
+unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
+
+/**
+ * ieee80211_hdrlen - get header length in bytes from frame control
+ * @fc: frame control field in little-endian format
+ */
+unsigned int ieee80211_hdrlen(__le16 fc);
+
+/**
+ * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
+ * @skb: the 802.11 data frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ */
+int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr,
+			   enum nl80211_iftype iftype);
+
+/**
+ * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11
+ * @skb: the 802.3 frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ * @bssid: the network bssid (used only for iftype STATION and ADHOC)
+ * @qos: build 802.11 QoS data frame
+ */
+int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr,
+			     enum nl80211_iftype iftype, u8 *bssid, bool qos);
+
+/**
+ * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
+ * @skb: the data frame
+ */
+unsigned int cfg80211_classify8021d(struct sk_buff *skb);
+
+/*
+ * Regulatory helper functions for wiphys
+ */
+
+/**
+ * regulatory_hint - driver hint to the wireless core a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ *	conflicts)
+ * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
+ * 	should be in. If @rd is set this should be NULL. Note that if you
+ * 	set this to NULL you should still set rd->alpha2 to some accepted
+ * 	alpha2.
+ *
+ * Wireless drivers can use this function to hint to the wireless core
+ * what it believes should be the current regulatory domain by
+ * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
+ * domain should be in or by providing a completely build regulatory domain.
+ * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
+ * for a regulatory domain structure for the respective country.
+ *
+ * The wiphy must have been registered to cfg80211 prior to this call.
+ * For cfg80211 drivers this means you must first use wiphy_register(),
+ * for mac80211 drivers you must first use ieee80211_register_hw().
+ *
+ * Drivers should check the return value, its possible you can get
+ * an -ENOMEM.
+ */
+extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
+
+/**
+ * regulatory_hint_11d - hints a country IE as a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ *	conflicts)
+ * @country_ie: pointer to the country IE
+ * @country_ie_len: length of the country IE
+ *
+ * We will intersect the rd with the what CRDA tells us should apply
+ * for the alpha2 this country IE belongs to, this prevents APs from
+ * sending us incorrect or outdated information against a country.
+ */
+extern void regulatory_hint_11d(struct wiphy *wiphy,
+				u8 *country_ie,
+				u8 country_ie_len);
+/**
+ * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @regd: the custom regulatory domain to use for this wiphy
+ *
+ * Drivers can sometimes have custom regulatory domains which do not apply
+ * to a specific country. Drivers can use this to apply such custom regulatory
+ * domains. This routine must be called prior to wiphy registration. The
+ * custom regulatory domain will be trusted completely and as such previous
+ * default channel settings will be disregarded. If no rule is found for a
+ * channel on the regulatory domain the channel will be disabled.
+ */
+extern void wiphy_apply_custom_regulatory(
+	struct wiphy *wiphy,
+	const struct ieee80211_regdomain *regd);
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @wiphy: the wiphy for which we want to process this rule for
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @desired_bw_khz: the desired max bandwidth you want to use per
+ *	channel. Note that this is still 20 MHz if you want to use HT40
+ *	as HT40 makes use of two channels for its 40 MHz width bandwidth.
+ *	If set to 0 we'll assume you want the standard 20 MHz.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
+ */
+extern int freq_reg_info(struct wiphy *wiphy,
+			 u32 center_freq,
+			 u32 desired_bw_khz,
+			 const struct ieee80211_reg_rule **reg_rule);
+
+/*
+ * Temporary wext handlers & helper functions
+ *
+ * In the future cfg80211 will simply assign the entire wext handler
+ * structure to netdevs it manages, but we're not there yet.
+ */
 int cfg80211_wext_giwname(struct net_device *dev,
 			  struct iw_request_info *info,
 			  char *name, char *extra);
@@ -834,9 +1422,72 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 int cfg80211_wext_giwscan(struct net_device *dev,
 			  struct iw_request_info *info,
 			  struct iw_point *data, char *extra);
+int cfg80211_wext_siwmlme(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *data, char *extra);
 int cfg80211_wext_giwrange(struct net_device *dev,
 			   struct iw_request_info *info,
 			   struct iw_point *data, char *extra);
+int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_siwessid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_giwessid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_siwap(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct sockaddr *ap_addr, char *extra);
+int cfg80211_ibss_wext_giwap(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct sockaddr *ap_addr, char *extra);
+
+struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy,
+					     struct iw_freq *freq);
+
+int cfg80211_wext_siwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra);
+int cfg80211_wext_giwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra);
+int cfg80211_wext_siwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra);
+int cfg80211_wext_giwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra);
+int cfg80211_wext_siwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra);
+int cfg80211_wext_giwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra);
+int cfg80211_wext_siwencodeext(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_point *erq, char *extra);
+int cfg80211_wext_siwencode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_point *erq, char *keybuf);
+int cfg80211_wext_giwencode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_point *erq, char *keybuf);
+int cfg80211_wext_siwtxpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *keybuf);
+int cfg80211_wext_giwtxpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *keybuf);
+
+/*
+ * callbacks for asynchronous cfg80211 methods, notification
+ * functions and BSS handling helpers
+ */
 
 /**
  * cfg80211_scan_done - notify that scan finished
@@ -864,6 +1515,14 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
 			  struct ieee80211_mgmt *mgmt, size_t len,
 			  s32 signal, gfp_t gfp);
 
+struct cfg80211_bss*
+cfg80211_inform_bss(struct wiphy *wiphy,
+		    struct ieee80211_channel *channel,
+		    const u8 *bssid,
+		    u64 timestamp, u16 capability, u16 beacon_interval,
+		    const u8 *ie, size_t ielen,
+		    s32 signal, gfp_t gfp);
+
 struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
 				      struct ieee80211_channel *channel,
 				      const u8 *bssid,
@@ -883,6 +1542,7 @@ struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
 				       const u8 *meshid, size_t meshidlen,
 				       const u8 *meshcfg);
 void cfg80211_put_bss(struct cfg80211_bss *bss);
+
 /**
  * cfg80211_unlink_bss - unlink BSS from internal data structures
  * @wiphy: the wiphy
@@ -902,44 +1562,62 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
  * @len: length of the frame data
  *
  * This function is called whenever an authentication has been processed in
- * station mode.
+ * station mode. The driver is required to call either this function or
+ * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
+ * call.
  */
 void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
+ * cfg80211_send_auth_timeout - notification of timed out authentication
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ */
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
+
+/**
  * cfg80211_send_rx_assoc - notification of processed association
  * @dev: network device
  * @buf: (re)association response frame (header + body)
  * @len: length of the frame data
  *
  * This function is called whenever a (re)association response has been
- * processed in station mode.
+ * processed in station mode. The driver is required to call either this
+ * function or cfg80211_send_assoc_timeout() to indicate the result of
+ * cfg80211_ops::assoc() call.
  */
 void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
- * cfg80211_send_rx_deauth - notification of processed deauthentication
+ * cfg80211_send_assoc_timeout - notification of timed out association
+ * @dev: network device
+ * @addr: The MAC address of the device with which the association timed out
+ */
+void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
+
+/**
+ * cfg80211_send_deauth - notification of processed deauthentication
  * @dev: network device
  * @buf: deauthentication frame (header + body)
  * @len: length of the frame data
  *
  * This function is called whenever deauthentication has been processed in
- * station mode.
+ * station mode. This includes both received deauthentication frames and
+ * locally generated ones.
  */
-void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf,
-			     size_t len);
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
- * cfg80211_send_rx_disassoc - notification of processed disassociation
+ * cfg80211_send_disassoc - notification of processed disassociation
  * @dev: network device
  * @buf: disassociation response frame (header + body)
  * @len: length of the frame data
  *
  * This function is called whenever disassociation has been processed in
- * station mode.
+ * station mode. This includes both received disassociation frames and locally
+ * generated ones.
  */
-void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf,
-			       size_t len);
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
  * cfg80211_hold_bss - exclude bss from expiration
@@ -958,4 +1636,55 @@ void cfg80211_hold_bss(struct cfg80211_bss *bss);
  */
 void cfg80211_unhold_bss(struct cfg80211_bss *bss);
 
+/**
+ * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
+ * @dev: network device
+ * @addr: The source MAC address of the frame
+ * @key_type: The key type that the received frame used
+ * @key_id: Key identifier (0..3)
+ * @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
+ *
+ * This function is called whenever the local MAC detects a MIC failure in a
+ * received frame. This matches with MLME-MICHAELMICFAILURE.indication()
+ * primitive.
+ */
+void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
+				  enum nl80211_key_type key_type, int key_id,
+				  const u8 *tsc);
+
+/**
+ * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the IBSS joined
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the device joined an IBSS or
+ * switched to a different BSSID. Before this function can be called,
+ * either a beacon has to have been received from the IBSS, or one of
+ * the cfg80211_inform_bss{,_frame} functions must have been called
+ * with the locally generated beacon -- this guarantees that there is
+ * always a scan result for this IBSS. cfg80211 will handle the rest.
+ */
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
+
+/**
+ * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
+ * @wiphy: the wiphy
+ * @blocked: block status
+ */
+void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked);
+
+/**
+ * wiphy_rfkill_start_polling - start polling rfkill
+ * @wiphy: the wiphy
+ */
+void wiphy_rfkill_start_polling(struct wiphy *wiphy);
+
+/**
+ * wiphy_rfkill_stop_polling - stop polling rfkill
+ * @wiphy: the wiphy
+ */
+void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
+
 #endif /* __NET_CFG80211_H */
diff --git a/include/net/dst.h b/include/net/dst.h
index 6be3b082a07..7fc409c19b3 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -195,6 +195,12 @@ struct dst_entry * dst_clone(struct dst_entry * dst)
 }
 
 extern void dst_release(struct dst_entry *dst);
+static inline void skb_dst_drop(struct sk_buff *skb)
+{
+	if (skb->_skb_dst)
+		dst_release(skb_dst(skb));
+	skb->_skb_dst = 0UL;
+}
 
 /* Children define the path of the packet through the
  * Linux networking.  Thus, destinations are stackable.
@@ -246,7 +252,7 @@ static inline void dst_negative_advice(struct dst_entry **dst_p)
 
 static inline void dst_link_failure(struct sk_buff *skb)
 {
-	struct dst_entry * dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	if (dst && dst->ops && dst->ops->link_failure)
 		dst->ops->link_failure(skb);
 }
@@ -265,13 +271,13 @@ static inline void dst_set_expires(struct dst_entry *dst, int timeout)
 /* Output packet to network from transport.  */
 static inline int dst_output(struct sk_buff *skb)
 {
-	return skb->dst->output(skb);
+	return skb_dst(skb)->output(skb);
 }
 
 /* Input packet from network to transport.  */
 static inline int dst_input(struct sk_buff *skb)
 {
-	return skb->dst->input(skb);
+	return skb_dst(skb)->input(skb);
 }
 
 static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie)
diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
index c2bb5cae651..ca4b2e84007 100644
--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -48,14 +48,12 @@ struct fib_rules_ops
 					 struct flowi *, int);
 	int			(*configure)(struct fib_rule *,
 					     struct sk_buff *,
-					     struct nlmsghdr *,
 					     struct fib_rule_hdr *,
 					     struct nlattr **);
 	int			(*compare)(struct fib_rule *,
 					   struct fib_rule_hdr *,
 					   struct nlattr **);
 	int			(*fill)(struct fib_rule *, struct sk_buff *,
-					struct nlmsghdr *,
 					struct fib_rule_hdr *);
 	u32			(*default_pref)(struct fib_rules_ops *ops);
 	size_t			(*nlmsg_payload)(struct fib_rule *);
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index 747c255d1df..1b0e3ee4ddd 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -88,6 +88,8 @@ struct genl_ops
 };
 
 extern int genl_register_family(struct genl_family *family);
+extern int genl_register_family_with_ops(struct genl_family *family,
+	struct genl_ops *ops, size_t n_ops);
 extern int genl_unregister_family(struct genl_family *family);
 extern int genl_register_ops(struct genl_family *, struct genl_ops *ops);
 extern int genl_unregister_ops(struct genl_family *, struct genl_ops *ops);
diff --git a/include/net/ieee802154/af_ieee802154.h b/include/net/ieee802154/af_ieee802154.h
new file mode 100644
index 00000000000..0d78605fb1a
--- /dev/null
+++ b/include/net/ieee802154/af_ieee802154.h
@@ -0,0 +1,60 @@
+/*
+ * IEEE 802.15.4 inteface for userspace
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef _AF_IEEE802154_H
+#define _AF_IEEE802154_H
+
+#include <linux/socket.h> /* for sa_family_t */
+
+enum {
+	IEEE802154_ADDR_NONE = 0x0,
+	/* RESERVED = 0x01, */
+	IEEE802154_ADDR_SHORT = 0x2, /* 16-bit address + PANid */
+	IEEE802154_ADDR_LONG = 0x3, /* 64-bit address + PANid */
+};
+
+/* address length, octets */
+#define IEEE802154_ADDR_LEN	8
+
+struct ieee802154_addr {
+	int addr_type;
+	u16 pan_id;
+	union {
+		u8 hwaddr[IEEE802154_ADDR_LEN];
+		u16 short_addr;
+	};
+};
+
+#define IEEE802154_PANID_BROADCAST	0xffff
+#define IEEE802154_ADDR_BROADCAST	0xffff
+#define IEEE802154_ADDR_UNDEF		0xfffe
+
+struct sockaddr_ieee802154 {
+	sa_family_t family; /* AF_IEEE802154 */
+	struct ieee802154_addr addr;
+};
+
+/* master device */
+#define IEEE802154_SIOC_ADD_SLAVE		(SIOCDEVPRIVATE + 0)
+
+#endif
diff --git a/include/net/ieee802154/mac_def.h b/include/net/ieee802154/mac_def.h
new file mode 100644
index 00000000000..8cb68463565
--- /dev/null
+++ b/include/net/ieee802154/mac_def.h
@@ -0,0 +1,160 @@
+/*
+ * IEEE802.15.4-2003 specification
+ *
+ * Copyright (C) 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef IEEE802154_MAC_DEF_H
+#define IEEE802154_MAC_DEF_H
+
+#define IEEE802154_FC_TYPE_BEACON	0x0	/* Frame is beacon */
+#define	IEEE802154_FC_TYPE_DATA		0x1	/* Frame is data */
+#define IEEE802154_FC_TYPE_ACK		0x2	/* Frame is acknowledgment */
+#define IEEE802154_FC_TYPE_MAC_CMD	0x3	/* Frame is MAC command */
+
+#define IEEE802154_FC_TYPE_SHIFT		0
+#define IEEE802154_FC_TYPE_MASK		((1 << 3) - 1)
+#define IEEE802154_FC_TYPE(x)		((x & IEEE802154_FC_TYPE_MASK) >> IEEE802154_FC_TYPE_SHIFT)
+#define IEEE802154_FC_SET_TYPE(v, x)	do {	\
+	v = (((v) & ~IEEE802154_FC_TYPE_MASK) | \
+	    (((x) << IEEE802154_FC_TYPE_SHIFT) & IEEE802154_FC_TYPE_MASK)); \
+	} while (0)
+
+#define IEEE802154_FC_SECEN		(1 << 3)
+#define IEEE802154_FC_FRPEND		(1 << 4)
+#define IEEE802154_FC_ACK_REQ		(1 << 5)
+#define IEEE802154_FC_INTRA_PAN		(1 << 6)
+
+#define IEEE802154_FC_SAMODE_SHIFT	14
+#define IEEE802154_FC_SAMODE_MASK	(3 << IEEE802154_FC_SAMODE_SHIFT)
+#define IEEE802154_FC_DAMODE_SHIFT	10
+#define IEEE802154_FC_DAMODE_MASK	(3 << IEEE802154_FC_DAMODE_SHIFT)
+
+#define IEEE802154_FC_SAMODE(x)		\
+	(((x) & IEEE802154_FC_SAMODE_MASK) >> IEEE802154_FC_SAMODE_SHIFT)
+
+#define IEEE802154_FC_DAMODE(x)		\
+	(((x) & IEEE802154_FC_DAMODE_MASK) >> IEEE802154_FC_DAMODE_SHIFT)
+
+
+/* MAC's Command Frames Identifiers */
+#define IEEE802154_CMD_ASSOCIATION_REQ		0x01
+#define IEEE802154_CMD_ASSOCIATION_RESP		0x02
+#define IEEE802154_CMD_DISASSOCIATION_NOTIFY	0x03
+#define IEEE802154_CMD_DATA_REQ			0x04
+#define IEEE802154_CMD_PANID_CONFLICT_NOTIFY	0x05
+#define IEEE802154_CMD_ORPHAN_NOTIFY		0x06
+#define IEEE802154_CMD_BEACON_REQ		0x07
+#define IEEE802154_CMD_COORD_REALIGN_NOTIFY	0x08
+#define IEEE802154_CMD_GTS_REQ			0x09
+
+/*
+ * The return values of MAC operations
+ */
+enum {
+	/*
+	 * The requested operation was completed successfully.
+	 * For a transmission request, this value indicates
+	 * a successful transmission.
+	 */
+	IEEE802154_SUCCESS = 0x0,
+
+	/* The beacon was lost following a synchronization request. */
+	IEEE802154_BEACON_LOSS = 0xe0,
+	/*
+	 * A transmission could not take place due to activity on the
+	 * channel, i.e., the CSMA-CA mechanism has failed.
+	 */
+	IEEE802154_CHNL_ACCESS_FAIL = 0xe1,
+	/* The GTS request has been denied by the PAN coordinator. */
+	IEEE802154_DENINED = 0xe2,
+	/* The attempt to disable the transceiver has failed. */
+	IEEE802154_DISABLE_TRX_FAIL = 0xe3,
+	/*
+	 * The received frame induces a failed security check according to
+	 * the security suite.
+	 */
+	IEEE802154_FAILED_SECURITY_CHECK = 0xe4,
+	/*
+	 * The frame resulting from secure processing has a length that is
+	 * greater than aMACMaxFrameSize.
+	 */
+	IEEE802154_FRAME_TOO_LONG = 0xe5,
+	/*
+	 * The requested GTS transmission failed because the specified GTS
+	 * either did not have a transmit GTS direction or was not defined.
+	 */
+	IEEE802154_INVALID_GTS = 0xe6,
+	/*
+	 * A request to purge an MSDU from the transaction queue was made using
+	 * an MSDU handle that was not found in the transaction table.
+	 */
+	IEEE802154_INVALID_HANDLE = 0xe7,
+	/* A parameter in the primitive is out of the valid range.*/
+	IEEE802154_INVALID_PARAMETER = 0xe8,
+	/* No acknowledgment was received after aMaxFrameRetries. */
+	IEEE802154_NO_ACK = 0xe9,
+	/* A scan operation failed to find any network beacons.*/
+	IEEE802154_NO_BEACON = 0xea,
+	/* No response data were available following a request. */
+	IEEE802154_NO_DATA = 0xeb,
+	/* The operation failed because a short address was not allocated. */
+	IEEE802154_NO_SHORT_ADDRESS = 0xec,
+	/*
+	 * A receiver enable request was unsuccessful because it could not be
+	 * completed within the CAP.
+	 */
+	IEEE802154_OUT_OF_CAP = 0xed,
+	/*
+	 * A PAN identifier conflict has been detected and communicated to the
+	 * PAN coordinator.
+	 */
+	IEEE802154_PANID_CONFLICT = 0xee,
+	/* A coordinator realignment command has been received. */
+	IEEE802154_REALIGMENT = 0xef,
+	/* The transaction has expired and its information discarded. */
+	IEEE802154_TRANSACTION_EXPIRED = 0xf0,
+	/* There is no capacity to store the transaction. */
+	IEEE802154_TRANSACTION_OVERFLOW = 0xf1,
+	/*
+	 * The transceiver was in the transmitter enabled state when the
+	 * receiver was requested to be enabled.
+	 */
+	IEEE802154_TX_ACTIVE = 0xf2,
+	/* The appropriate key is not available in the ACL. */
+	IEEE802154_UNAVAILABLE_KEY = 0xf3,
+	/*
+	 * A SET/GET request was issued with the identifier of a PIB attribute
+	 * that is not supported.
+	 */
+	IEEE802154_UNSUPPORTED_ATTR = 0xf4,
+	/*
+	 * A request to perform a scan operation failed because the MLME was
+	 * in the process of performing a previously initiated scan operation.
+	 */
+	IEEE802154_SCAN_IN_PROGRESS = 0xfc,
+};
+
+
+#endif
+
+
diff --git a/include/net/ieee802154/netdevice.h b/include/net/ieee802154/netdevice.h
new file mode 100644
index 00000000000..e2506af3e7c
--- /dev/null
+++ b/include/net/ieee802154/netdevice.h
@@ -0,0 +1,115 @@
+/*
+ * An interface between IEEE802.15.4 device and rest of the kernel.
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef IEEE802154_NETDEVICE_H
+#define IEEE802154_NETDEVICE_H
+
+/*
+ * A control block of skb passed between the ARPHRD_IEEE802154 device
+ * and other stack parts.
+ */
+struct ieee802154_mac_cb {
+	u8 lqi;
+	struct ieee802154_addr sa;
+	struct ieee802154_addr da;
+	u8 flags;
+	u8 seq;
+};
+
+static inline struct ieee802154_mac_cb *mac_cb(struct sk_buff *skb)
+{
+	return (struct ieee802154_mac_cb *)skb->cb;
+}
+
+#define MAC_CB_FLAG_TYPEMASK		((1 << 3) - 1)
+
+#define MAC_CB_FLAG_ACKREQ		(1 << 3)
+#define MAC_CB_FLAG_SECEN		(1 << 4)
+#define MAC_CB_FLAG_INTRAPAN		(1 << 5)
+
+static inline int mac_cb_is_ackreq(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_ACKREQ;
+}
+
+static inline int mac_cb_is_secen(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_SECEN;
+}
+
+static inline int mac_cb_is_intrapan(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_INTRAPAN;
+}
+
+static inline int mac_cb_type(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_TYPEMASK;
+}
+
+#define IEEE802154_MAC_SCAN_ED		0
+#define IEEE802154_MAC_SCAN_ACTIVE	1
+#define IEEE802154_MAC_SCAN_PASSIVE	2
+#define IEEE802154_MAC_SCAN_ORPHAN	3
+
+/*
+ * This should be located at net_device->ml_priv
+ */
+struct ieee802154_mlme_ops {
+	int (*assoc_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 channel, u8 cap);
+	int (*assoc_resp)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u16 short_addr, u8 status);
+	int (*disassoc_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 reason);
+	int (*start_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 channel, u8 bcn_ord, u8 sf_ord,
+			u8 pan_coord, u8 blx, u8 coord_realign);
+	int (*scan_req)(struct net_device *dev,
+			u8 type, u32 channels, u8 duration);
+
+	/*
+	 * FIXME: these should become the part of PIB/MIB interface.
+	 * However we still don't have IB interface of any kind
+	 */
+	u16 (*get_pan_id)(struct net_device *dev);
+	u16 (*get_short_addr)(struct net_device *dev);
+	u8 (*get_dsn)(struct net_device *dev);
+	u8 (*get_bsn)(struct net_device *dev);
+};
+
+static inline struct ieee802154_mlme_ops *ieee802154_mlme_ops(
+		struct net_device *dev)
+{
+	return dev->ml_priv;
+}
+
+#endif
+
+
diff --git a/include/net/ieee802154/nl802154.h b/include/net/ieee802154/nl802154.h
new file mode 100644
index 00000000000..78efcdf52b5
--- /dev/null
+++ b/include/net/ieee802154/nl802154.h
@@ -0,0 +1,41 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef IEEE802154_NL_H
+#define IEEE802154_NL_H
+
+struct net_device;
+struct ieee802154_addr;
+
+int ieee802154_nl_assoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 cap);
+int ieee802154_nl_assoc_confirm(struct net_device *dev,
+		u16 short_addr, u8 status);
+int ieee802154_nl_disassoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason);
+int ieee802154_nl_disassoc_confirm(struct net_device *dev,
+		u8 status);
+int ieee802154_nl_scan_confirm(struct net_device *dev,
+		u8 status, u8 scan_type, u32 unscanned,
+		u8 *edl/*, struct list_head *pan_desc_list */);
+int ieee802154_nl_beacon_indic(struct net_device *dev, u16 panid,
+		u16 coord_addr);
+
+#endif
diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
index f74665d7bea..22c73a77cd9 100644
--- a/include/net/inet6_hashtables.h
+++ b/include/net/inet6_hashtables.h
@@ -100,7 +100,7 @@ static inline struct sock *__inet6_lookup_skb(struct inet_hashinfo *hashinfo,
 
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
-	else return __inet6_lookup(dev_net(skb->dst->dev), hashinfo,
+	else return __inet6_lookup(dev_net(skb_dst(skb)->dev), hashinfo,
 				   &ipv6_hdr(skb)->saddr, sport,
 				   &ipv6_hdr(skb)->daddr, ntohs(dport),
 				   inet6_iif(skb));
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index a44e2248b2e..d522dcf3031 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -385,7 +385,7 @@ static inline struct sock *__inet_lookup_skb(struct inet_hashinfo *hashinfo,
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
 	else
-		return __inet_lookup(dev_net(skb->dst->dev), hashinfo,
+		return __inet_lookup(dev_net(skb_dst(skb)->dev), hashinfo,
 				     iph->saddr, sport,
 				     iph->daddr, dport, inet_iif(skb));
 }
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index de0ecc71cf0..47004f35cc7 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -17,6 +17,7 @@
 #define _INET_SOCK_H
 
 
+#include <linux/kmemcheck.h>
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/jhash.h>
@@ -66,14 +67,16 @@ struct inet_request_sock {
 	__be32			loc_addr;
 	__be32			rmt_addr;
 	__be16			rmt_port;
-	u16			snd_wscale : 4, 
-				rcv_wscale : 4, 
+	kmemcheck_bitfield_begin(flags);
+	u16			snd_wscale : 4,
+				rcv_wscale : 4,
 				tstamp_ok  : 1,
 				sack_ok	   : 1,
 				wscale_ok  : 1,
 				ecn_ok	   : 1,
 				acked	   : 1,
 				no_srccheck: 1;
+	kmemcheck_bitfield_end(flags);
 	struct ip_options	*opt;
 };
 
@@ -130,7 +133,8 @@ struct inet_sock {
 				freebind:1,
 				hdrincl:1,
 				mc_loop:1,
-				transparent:1;
+				transparent:1,
+				mc_all:1;
 	int			mc_index;
 	__be32			mc_addr;
 	struct ip_mc_socklist	*mc_list;
@@ -198,9 +202,12 @@ static inline int inet_sk_ehashfn(const struct sock *sk)
 static inline struct request_sock *inet_reqsk_alloc(struct request_sock_ops *ops)
 {
 	struct request_sock *req = reqsk_alloc(ops);
+	struct inet_request_sock *ireq = inet_rsk(req);
 
-	if (req != NULL)
-		inet_rsk(req)->opt = NULL;
+	if (req != NULL) {
+		kmemcheck_annotate_bitfield(ireq, flags);
+		ireq->opt = NULL;
+	}
 
 	return req;
 }
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index 4b8ece22b8e..b63b80fac56 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -16,6 +16,7 @@
 #define _INET_TIMEWAIT_SOCK_
 
 
+#include <linux/kmemcheck.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/timer.h>
@@ -127,10 +128,12 @@ struct inet_timewait_sock {
 	__be32			tw_rcv_saddr;
 	__be16			tw_dport;
 	__u16			tw_num;
+	kmemcheck_bitfield_begin(flags);
 	/* And these are ours. */
 	__u8			tw_ipv6only:1,
 				tw_transparent:1;
-	/* 15 bits hole, try to pack */
+	/* 14 bits hole, try to pack */
+	kmemcheck_bitfield_end(flags);
 	__u16			tw_ipv6_offset;
 	unsigned long		tw_ttd;
 	struct inet_bind_bucket	*tw_tb;
diff --git a/include/net/ip.h b/include/net/ip.h
index 4ac7577f98d..72c36926c26 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -168,7 +168,10 @@ struct ipv4_config
 extern struct ipv4_config ipv4_config;
 #define IP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.ip_statistics, field)
 #define IP_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.ip_statistics, field)
+#define IP_ADD_STATS(net, field, val)	SNMP_ADD_STATS((net)->mib.ip_statistics, field, val)
 #define IP_ADD_STATS_BH(net, field, val) SNMP_ADD_STATS_BH((net)->mib.ip_statistics, field, val)
+#define IP_UPD_PO_STATS(net, field, val) SNMP_UPD_PO_STATS((net)->mib.ip_statistics, field, val)
+#define IP_UPD_PO_STATS_BH(net, field, val) SNMP_UPD_PO_STATS_BH((net)->mib.ip_statistics, field, val)
 #define NET_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.net_statistics, field)
 #define NET_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.net_statistics, field)
 #define NET_INC_STATS_USER(net, field) 	SNMP_INC_STATS_USER((net)->mib.net_statistics, field)
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 5f53db7e4e5..0e1b8aebaff 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -142,7 +142,7 @@ static inline void ip6_dst_store(struct sock *sk, struct dst_entry *dst,
 
 static inline int ipv6_unicast_destination(struct sk_buff *skb)
 {
-	struct rt6_info *rt = (struct rt6_info *) skb->dst;
+	struct rt6_info *rt = (struct rt6_info *) skb_dst(skb);
 
 	return rt->rt6i_flags & RTF_LOCAL;
 }
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index 8b12667f7a2..ef91fe924ba 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -124,14 +124,12 @@ struct fib_result_nl {
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
 
 #define FIB_RES_NH(res)		((res).fi->fib_nh[(res).nh_sel])
-#define FIB_RES_RESET(res)	((res).nh_sel = 0)
 
 #define FIB_TABLE_HASHSZ 2
 
 #else /* CONFIG_IP_ROUTE_MULTIPATH */
 
 #define FIB_RES_NH(res)		((res).fi->fib_nh[0])
-#define FIB_RES_RESET(res)
 
 #define FIB_TABLE_HASHSZ 256
 
@@ -145,7 +143,6 @@ struct fib_result_nl {
 struct fib_table {
 	struct hlist_node tb_hlist;
 	u32		tb_id;
-	unsigned	tb_stamp;
 	int		tb_default;
 	int		(*tb_lookup)(struct fib_table *tb, const struct flowi *flp, struct fib_result *res);
 	int		(*tb_insert)(struct fib_table *, struct fib_config *);
diff --git a/include/net/ipip.h b/include/net/ipip.h
index fdf9bd74370..5d3036fa151 100644
--- a/include/net/ipip.h
+++ b/include/net/ipip.h
@@ -28,11 +28,18 @@ struct ip_tunnel
 	unsigned int			prl_count;	/* # of entries in PRL */
 };
 
+/* ISATAP: default interval between RS in secondy */
+#define IPTUNNEL_RS_DEFAULT_DELAY	(900)
+
 struct ip_tunnel_prl_entry
 {
 	struct ip_tunnel_prl_entry	*next;
 	__be32				addr;
 	u16				flags;
+	unsigned long			rs_delay;
+	struct timer_list		rs_timer;
+	struct ip_tunnel		*tunnel;
+	spinlock_t			lock;
 };
 
 #define IPTUNNEL_XMIT() do {						\
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index c1f16fc49ad..f27fd83d67d 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -126,15 +126,28 @@ extern struct ctl_path net_ipv6_ctl_path[];
 	SNMP_ADD_STATS##modifier((net)->mib.statname##_statistics, (field), (val));\
 })
 
+#define _DEVUPD(net, statname, modifier, idev, field, val)		\
+({									\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_UPD_PO_STATS##modifier((_idev)->stats.statname, field, (val)); \
+	SNMP_UPD_PO_STATS##modifier((net)->mib.statname##_statistics, field, (val));\
+})
+
 /* MIBs */
 
 #define IP6_INC_STATS(net, idev,field)		\
 		_DEVINC(net, ipv6, , idev, field)
 #define IP6_INC_STATS_BH(net, idev,field)	\
 		_DEVINC(net, ipv6, _BH, idev, field)
+#define IP6_ADD_STATS(net, idev,field,val)	\
+		_DEVADD(net, ipv6, , idev, field, val)
 #define IP6_ADD_STATS_BH(net, idev,field,val)	\
 		_DEVADD(net, ipv6, _BH, idev, field, val)
-
+#define IP6_UPD_PO_STATS(net, idev,field,val)   \
+		_DEVUPD(net, ipv6, , idev, field, val)
+#define IP6_UPD_PO_STATS_BH(net, idev,field,val)   \
+		_DEVUPD(net, ipv6, _BH, idev, field, val)
 #define ICMP6_INC_STATS(net, idev, field)	\
 		_DEVINC(net, icmpv6, , idev, field)
 #define ICMP6_INC_STATS_BH(net, idev, field)	\
diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h
index 85f80eadfa3..21ee49ffcba 100644
--- a/include/net/iucv/af_iucv.h
+++ b/include/net/iucv/af_iucv.h
@@ -73,8 +73,17 @@ struct iucv_sock {
 	struct sk_buff_head	backlog_skb_q;
 	struct sock_msg_q	message_q;
 	unsigned int		send_tag;
+	u8			flags;
+	u16			msglimit;
 };
 
+/* iucv socket options (SOL_IUCV) */
+#define SO_IPRMDATA_MSG	0x0080		/* send/recv IPRM_DATA msgs */
+#define SO_MSGLIMIT	0x1000		/* get/set IUCV MSGLIMIT */
+
+/* iucv related control messages (scm) */
+#define SCM_IUCV_TRGCLS	0x0001		/* target class control message */
+
 struct iucv_sock_list {
 	struct hlist_head head;
 	rwlock_t	  lock;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 3b83a80e3fe..c0610447697 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -19,7 +19,6 @@
 #include <linux/wireless.h>
 #include <linux/device.h>
 #include <linux/ieee80211.h>
-#include <net/wireless.h>
 #include <net/cfg80211.h>
 
 /**
@@ -74,22 +73,6 @@
  */
 
 /**
- * struct ieee80211_ht_bss_info - describing BSS's HT characteristics
- *
- * This structure describes most essential parameters needed
- * to describe 802.11n HT characteristics in a BSS.
- *
- * @primary_channel: channel number of primery channel
- * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width)
- * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection)
- */
-struct ieee80211_ht_bss_info {
-	u8 primary_channel;
-	u8 bss_cap;  /* use IEEE80211_HT_IE_CHA_ */
-	u8 bss_op_mode; /* use IEEE80211_HT_IE_ */
-};
-
-/**
  * enum ieee80211_max_queues - maximum number of queues
  *
  * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
@@ -150,6 +133,13 @@ struct ieee80211_low_level_stats {
  * @BSS_CHANGED_ERP_SLOT: slot timing changed
  * @BSS_CHANGED_HT: 802.11n parameters changed
  * @BSS_CHANGED_BASIC_RATES: Basic rateset changed
+ * @BSS_CHANGED_BEACON_INT: Beacon interval changed
+ * @BSS_CHANGED_BSSID: BSSID changed, for whatever
+ *	reason (IBSS and managed mode)
+ * @BSS_CHANGED_BEACON: Beacon data changed, retrieve
+ *	new beacon (beaconing modes)
+ * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be
+ *	enabled/disabled (beaconing modes)
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -158,14 +148,10 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_ERP_SLOT		= 1<<3,
 	BSS_CHANGED_HT                  = 1<<4,
 	BSS_CHANGED_BASIC_RATES		= 1<<5,
-};
-
-/**
- * struct ieee80211_bss_ht_conf - BSS's changing HT configuration
- * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info)
- */
-struct ieee80211_bss_ht_conf {
-	u16 operation_mode;
+	BSS_CHANGED_BEACON_INT		= 1<<6,
+	BSS_CHANGED_BSSID		= 1<<7,
+	BSS_CHANGED_BEACON		= 1<<8,
+	BSS_CHANGED_BEACON_ENABLED	= 1<<9,
 };
 
 /**
@@ -187,12 +173,16 @@ struct ieee80211_bss_ht_conf {
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
- * @ht: BSS's HT configuration
  * @basic_rates: bitmap of basic rates, each bit stands for an
  *	index into the rate table configured by the driver in
  *	the current band.
+ * @bssid: The BSSID for this BSS
+ * @enable_beacon: whether beaconing should be enabled or not
+ * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
+ *	This field is only valid when the channel type is one of the HT types.
  */
 struct ieee80211_bss_conf {
+	const u8 *bssid;
 	/* association related data */
 	bool assoc;
 	u16 aid;
@@ -200,12 +190,13 @@ struct ieee80211_bss_conf {
 	bool use_cts_prot;
 	bool use_short_preamble;
 	bool use_short_slot;
+	bool enable_beacon;
 	u8 dtim_period;
 	u16 beacon_int;
 	u16 assoc_capability;
 	u64 timestamp;
 	u32 basic_rates;
-	struct ieee80211_bss_ht_conf ht;
+	u16 ht_operation_mode;
 };
 
 /**
@@ -248,6 +239,8 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
  *	used to indicate that a pending frame requires TX processing before
  *	it can be sent out.
+ * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211,
+ *	used to indicate that a frame was already retried due to PS
  */
 enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
@@ -265,6 +258,7 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(12),
 	IEEE80211_TX_INTFL_RCALGO		= BIT(13),
 	IEEE80211_TX_INTFL_NEED_TXPROCESSING	= BIT(14),
+	IEEE80211_TX_INTFL_RETRIED		= BIT(15),
 };
 
 /**
@@ -518,52 +512,76 @@ struct ieee80211_rx_status {
  * Flags to define PHY configuration options
  *
  * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
- * @IEEE80211_CONF_PS: Enable 802.11 power save mode
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only)
+ * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
+ *	the driver should be prepared to handle configuration requests but
+ *	may turn the device off as much as possible. Typically, this flag will
+ *	be set when an interface is set UP but not associated or scanning, but
+ *	it can also be unset in that case when monitor interfaces are active.
  */
 enum ieee80211_conf_flags {
 	IEEE80211_CONF_RADIOTAP		= (1<<0),
 	IEEE80211_CONF_PS		= (1<<1),
+	IEEE80211_CONF_IDLE		= (1<<2),
 };
 
 
 /**
  * enum ieee80211_conf_changed - denotes which configuration changed
  *
- * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed
- * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
+ * @_IEEE80211_CONF_CHANGE_RADIO_ENABLED: DEPRECATED
  * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
  * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
- * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
- * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
+ * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
  * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
  */
 enum ieee80211_conf_changed {
-	IEEE80211_CONF_CHANGE_RADIO_ENABLED	= BIT(0),
-	IEEE80211_CONF_CHANGE_BEACON_INTERVAL	= BIT(1),
+	_IEEE80211_CONF_CHANGE_RADIO_ENABLED	= BIT(0),
 	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
 	IEEE80211_CONF_CHANGE_RADIOTAP		= BIT(3),
 	IEEE80211_CONF_CHANGE_PS		= BIT(4),
-	IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT	= BIT(5),
-	IEEE80211_CONF_CHANGE_POWER		= BIT(6),
-	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(7),
-	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(8),
+	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
+	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
+	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(7),
+	IEEE80211_CONF_CHANGE_IDLE		= BIT(8),
 };
 
+static inline __deprecated enum ieee80211_conf_changed
+__IEEE80211_CONF_CHANGE_RADIO_ENABLED(void)
+{
+	return _IEEE80211_CONF_CHANGE_RADIO_ENABLED;
+}
+#define IEEE80211_CONF_CHANGE_RADIO_ENABLED \
+	__IEEE80211_CONF_CHANGE_RADIO_ENABLED()
+
 /**
  * struct ieee80211_conf - configuration of the device
  *
  * This struct indicates how the driver shall configure the hardware.
  *
+ * @flags: configuration flags defined above
+ *
  * @radio_enabled: when zero, driver is required to switch off the radio.
- * @beacon_int: beacon interval (TODO make interface config)
+ * @beacon_int: DEPRECATED, DO NOT USE
+ *
  * @listen_interval: listen interval in units of beacon interval
- * @flags: configuration flags defined above
+ * @max_sleep_period: the maximum number of beacon intervals to sleep for
+ *	before checking the beacon for a TIM bit (managed mode only); this
+ *	value will be only achievable between DTIM frames, the hardware
+ *	needs to check for the multicast traffic bit in DTIM beacons.
+ *	This variable is valid only when the CONF_PS flag is set.
+ * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
+ *	powersave documentation below. This variable is valid only when
+ *	the CONF_PS flag is set.
+ *
  * @power_level: requested transmit power (in dBm)
- * @dynamic_ps_timeout: dynamic powersave timeout (in ms)
+ *
  * @channel: the channel to tune to
  * @channel_type: the channel (HT) type
+ *
  * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
  *    (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
  *    but actually means the number of transmissions not the number of retries
@@ -572,12 +590,13 @@ enum ieee80211_conf_changed {
  *    number of transmissions not the number of retries
  */
 struct ieee80211_conf {
-	int beacon_int;
+	int __deprecated beacon_int;
 	u32 flags;
 	int power_level, dynamic_ps_timeout;
+	int max_sleep_period;
 
 	u16 listen_interval;
-	bool radio_enabled;
+	bool __deprecated radio_enabled;
 
 	u8 long_frame_max_tx_count, short_frame_max_tx_count;
 
@@ -640,37 +659,6 @@ struct ieee80211_if_init_conf {
 };
 
 /**
- * enum ieee80211_if_conf_change - interface config change flags
- *
- * @IEEE80211_IFCC_BSSID: The BSSID changed.
- * @IEEE80211_IFCC_BEACON: The beacon for this interface changed
- *	(currently AP and MESH only), use ieee80211_beacon_get().
- * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed.
- */
-enum ieee80211_if_conf_change {
-	IEEE80211_IFCC_BSSID		= BIT(0),
-	IEEE80211_IFCC_BEACON		= BIT(1),
-	IEEE80211_IFCC_BEACON_ENABLED	= BIT(2),
-};
-
-/**
- * struct ieee80211_if_conf - configuration of an interface
- *
- * @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
- * @bssid: BSSID of the network we are associated to/creating.
- * @enable_beacon: Indicates whether beacons can be sent.
- *	This is valid only for AP/IBSS/MESH modes.
- *
- * This structure is passed to the config_interface() callback of
- * &struct ieee80211_hw.
- */
-struct ieee80211_if_conf {
-	u32 changed;
-	const u8 *bssid;
-	bool enable_beacon;
-};
-
-/**
  * enum ieee80211_key_alg - key algorithm
  * @ALG_WEP: WEP40 or WEP104
  * @ALG_TKIP: TKIP
@@ -685,16 +673,6 @@ enum ieee80211_key_alg {
 };
 
 /**
- * enum ieee80211_key_len - key length
- * @LEN_WEP40: WEP 5-byte long key
- * @LEN_WEP104: WEP 13-byte long key
- */
-enum ieee80211_key_len {
-	LEN_WEP40 = 5,
-	LEN_WEP104 = 13,
-};
-
-/**
  * enum ieee80211_key_flags - key flags
  *
  * These flags are used for communication about keys between the driver
@@ -1109,11 +1087,9 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * need software support for parsing the TIM bitmap. This is also supported
  * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
  * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
- * required to pass up beacons. Additionally, in this case, mac80211 will
- * wake up the hardware when multicast traffic is announced in the beacon.
- *
- * FIXME: I don't think we can be fast enough in software when we want to
- *	  receive multicast traffic?
+ * required to pass up beacons. The hardware is still required to handle
+ * waking up for multicast traffic; if it cannot the driver must handle that
+ * as best as it can, mac80211 is too slow.
  *
  * Dynamic powersave mode is an extension to normal powersave mode in which
  * the hardware stays awake for a user-specified period of time after sending
@@ -1134,11 +1110,53 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * way the host will only receive beacons where some relevant information
  * (for example ERP protection or WMM settings) have changed.
  *
- * Beacon filter support is informed with %IEEE80211_HW_BEACON_FILTER flag.
- * The driver needs to enable beacon filter support whenever power save is
- * enabled, that is %IEEE80211_CONF_PS is set. When power save is enabled,
- * the stack will not check for beacon miss at all and the driver needs to
- * notify about complete loss of beacons with ieee80211_beacon_loss().
+ * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER
+ * hardware capability. The driver needs to enable beacon filter support
+ * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When
+ * power save is enabled, the stack will not check for beacon loss and the
+ * driver needs to notify about loss of beacons with ieee80211_beacon_loss().
+ *
+ * The time (or number of beacons missed) until the firmware notifies the
+ * driver of a beacon loss event (which in turn causes the driver to call
+ * ieee80211_beacon_loss()) should be configurable and will be controlled
+ * by mac80211 and the roaming algorithm in the future.
+ *
+ * Since there may be constantly changing information elements that nothing
+ * in the software stack cares about, we will, in the future, have mac80211
+ * tell the driver which information elements are interesting in the sense
+ * that we want to see changes in them. This will include
+ *  - a list of information element IDs
+ *  - a list of OUIs for the vendor information element
+ *
+ * Ideally, the hardware would filter out any beacons without changes in the
+ * requested elements, but if it cannot support that it may, at the expense
+ * of some efficiency, filter out only a subset. For example, if the device
+ * doesn't support checking for OUIs it should pass up all changes in all
+ * vendor information elements.
+ *
+ * Note that change, for the sake of simplification, also includes information
+ * elements appearing or disappearing from the beacon.
+ *
+ * Some hardware supports an "ignore list" instead, just make sure nothing
+ * that was requested is on the ignore list, and include commonly changing
+ * information element IDs in the ignore list, for example 11 (BSS load) and
+ * the various vendor-assigned IEs with unknown contents (128, 129, 133-136,
+ * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility
+ * it could also include some currently unused IDs.
+ *
+ *
+ * In addition to these capabilities, hardware should support notifying the
+ * host of changes in the beacon RSSI. This is relevant to implement roaming
+ * when no traffic is flowing (when traffic is flowing we see the RSSI of
+ * the received data packets). This can consist in notifying the host when
+ * the RSSI changes significantly or when it drops below or rises above
+ * configurable thresholds. In the future these thresholds will also be
+ * configured by mac80211 (which gets them from userspace) to implement
+ * them as the roaming algorithm requires.
+ *
+ * If the hardware cannot implement this, the driver should ask it to
+ * periodically pass beacon frames to the host so that software can do the
+ * signal strength threshold checking.
  */
 
 /**
@@ -1298,10 +1316,6 @@ enum ieee80211_ampdu_mlme_action {
  *	This function should never fail but returns a negative error code
  *	if it does.
  *
- * @config_interface: Handler for configuration requests related to interfaces
- *	(e.g. BSSID changes.)
- *	Returns a negative error code which will be seen in userspace.
- *
  * @bss_info_changed: Handler for configuration requests related to BSS
  *	parameters that may vary during BSS's lifespan, and may affect low
  *	level driver (e.g. assoc/disassoc status, erp parameters).
@@ -1330,11 +1344,14 @@ enum ieee80211_ampdu_mlme_action {
  *	the scan state machine in stack. The scan must honour the channel
  *	configuration done by the regulatory agent in the wiphy's
  *	registered bands. The hardware (or the driver) needs to make sure
- *	that power save is disabled. When the scan finishes,
- *	ieee80211_scan_completed() must be called; note that it also must
- *	be called when the scan cannot finish because the hardware is
- *	turned off! Anything else is a bug! Returns a negative error code
- *	which will be seen in userspace.
+ *	that power save is disabled.
+ *	The @req ie/ie_len members are rewritten by mac80211 to contain the
+ *	entire IEs after the SSID, so that drivers need not look at these
+ *	at all but just send them after the SSID -- mac80211 includes the
+ *	(extended) supported rates and HT information (where applicable).
+ *	When the scan finishes, ieee80211_scan_completed() must be called;
+ *	note that it also must be called when the scan cannot finish due to
+ *	any error unless this callback returned a negative error code.
  *
  * @sw_scan_start: Notifier function that is called just before a software scan
  *	is started. Can be NULL, if the driver doesn't need this notification.
@@ -1390,6 +1407,10 @@ enum ieee80211_ampdu_mlme_action {
  * 	is the first frame we expect to perform the action on. Notice
  * 	that TX/RX_STOP can pass NULL for this parameter.
  *	Returns a negative error code on failure.
+ *
+ * @rfkill_poll: Poll rfkill hardware state. If you need this, you also
+ *	need to set wiphy->rfkill_poll to %true before registration,
+ *	and need to call wiphy_rfkill_set_hw_state() in the callback.
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1400,9 +1421,6 @@ struct ieee80211_ops {
 	void (*remove_interface)(struct ieee80211_hw *hw,
 				 struct ieee80211_if_init_conf *conf);
 	int (*config)(struct ieee80211_hw *hw, u32 changed);
-	int (*config_interface)(struct ieee80211_hw *hw,
-				struct ieee80211_vif *vif,
-				struct ieee80211_if_conf *conf);
 	void (*bss_info_changed)(struct ieee80211_hw *hw,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *info,
@@ -1441,6 +1459,8 @@ struct ieee80211_ops {
 	int (*ampdu_action)(struct ieee80211_hw *hw,
 			    enum ieee80211_ampdu_mlme_action action,
 			    struct ieee80211_sta *sta, u16 tid, u16 *ssn);
+
+	void (*rfkill_poll)(struct ieee80211_hw *hw);
 };
 
 /**
@@ -1572,6 +1592,20 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw);
  */
 void ieee80211_free_hw(struct ieee80211_hw *hw);
 
+/**
+ * ieee80211_restart_hw - restart hardware completely
+ *
+ * Call this function when the hardware was restarted for some reason
+ * (hardware error, ...) and the driver is unable to restore its state
+ * by itself. mac80211 assumes that at this point the driver/hardware
+ * is completely uninitialised and stopped, it starts the process by
+ * calling the ->start() operation. The driver will need to reset all
+ * internal state that it has prior to calling this function.
+ *
+ * @hw: the hardware to restart
+ */
+void ieee80211_restart_hw(struct ieee80211_hw *hw);
+
 /* trick to avoid symbol clashes with the ieee80211 subsystem */
 void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
 		    struct ieee80211_rx_status *status);
@@ -1775,24 +1809,6 @@ struct sk_buff *
 ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 
 /**
- * ieee80211_get_hdrlen_from_skb - get header length from data
- *
- * Given an skb with a raw 802.11 header at the data pointer this function
- * returns the 802.11 header length in bytes (not including encryption
- * headers). If the data in the sk_buff is too short to contain a valid 802.11
- * header the function returns 0.
- *
- * @skb: the frame
- */
-unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
-
-/**
- * ieee80211_hdrlen - get header length in bytes from frame control
- * @fc: frame control field in little-endian format
- */
-unsigned int ieee80211_hdrlen(__le16 fc);
-
-/**
  * ieee80211_get_tkip_key - get a TKIP rc4 for skb
  *
  * This function computes a TKIP rc4 key for an skb. It computes
diff --git a/include/net/netfilter/ipv4/nf_conntrack_icmp.h b/include/net/netfilter/ipv4/nf_conntrack_icmp.h
deleted file mode 100644
index 3dd22cff23e..00000000000
--- a/include/net/netfilter/ipv4/nf_conntrack_icmp.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _NF_CONNTRACK_ICMP_H
-#define _NF_CONNTRACK_ICMP_H
-/* ICMP tracking. */
-#include <asm/atomic.h>
-
-struct ip_ct_icmp
-{
-	/* Optimization: when number in == number out, forget immediately. */
-	atomic_t count;
-};
-#endif /* _NF_CONNTRACK_ICMP_H */
diff --git a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h
index 86591afda29..67edd50a398 100644
--- a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h
+++ b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h
@@ -9,7 +9,6 @@
 
 #ifndef _NF_CONNTRACK_ICMPV6_H
 #define _NF_CONNTRACK_ICMPV6_H
-#include <asm/atomic.h>
 
 #ifndef ICMPV6_NI_QUERY
 #define ICMPV6_NI_QUERY 139
@@ -18,10 +17,4 @@
 #define ICMPV6_NI_REPLY 140
 #endif
 
-struct nf_ct_icmpv6
-{
-	/* Optimization: when number in == number out, forget immediately. */
-	atomic_t count;
-};
-
 #endif /* _NF_CONNTRACK_ICMPV6_H */
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 6c3f964de9e..a632689b61b 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -23,7 +23,6 @@
 #include <linux/netfilter/nf_conntrack_dccp.h>
 #include <linux/netfilter/nf_conntrack_sctp.h>
 #include <linux/netfilter/nf_conntrack_proto_gre.h>
-#include <net/netfilter/ipv4/nf_conntrack_icmp.h>
 #include <net/netfilter/ipv6/nf_conntrack_icmpv6.h>
 
 #include <net/netfilter/nf_conntrack_tuple.h>
@@ -34,8 +33,6 @@ union nf_conntrack_proto {
 	struct nf_ct_dccp dccp;
 	struct ip_ct_sctp sctp;
 	struct ip_ct_tcp tcp;
-	struct ip_ct_icmp icmp;
-	struct nf_ct_icmpv6 icmpv6;
 	struct nf_ct_gre gre;
 };
 
@@ -96,6 +93,8 @@ struct nf_conn {
            plus 1 for any connection(s) we are `master' for */
 	struct nf_conntrack ct_general;
 
+	spinlock_t lock;
+
 	/* XXX should I move this to the tail ? - Y.K */
 	/* These are my tuples; original and reply */
 	struct nf_conntrack_tuple_hash tuplehash[IP_CT_DIR_MAX];
@@ -144,6 +143,8 @@ static inline u_int8_t nf_ct_protonum(const struct nf_conn *ct)
 	return ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum;
 }
 
+#define nf_ct_tuple(ct, dir) (&(ct)->tuplehash[dir].tuple)
+
 /* get master conntrack via master expectation */
 #define master_ct(conntr) (conntr->master)
 
@@ -200,8 +201,10 @@ extern struct nf_conntrack_tuple_hash *
 __nf_conntrack_find(struct net *net, const struct nf_conntrack_tuple *tuple);
 
 extern void nf_conntrack_hash_insert(struct nf_conn *ct);
+extern void nf_ct_delete_from_lists(struct nf_conn *ct);
+extern void nf_ct_insert_dying_list(struct nf_conn *ct);
 
-extern void nf_conntrack_flush(struct net *net, u32 pid, int report);
+extern void nf_conntrack_flush_report(struct net *net, u32 pid, int report);
 
 extern bool nf_ct_get_tuplepr(const struct sk_buff *skb,
 			      unsigned int nhoff, u_int16_t l3num,
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
index 0ff0dc69ca4..4f20d58e2ab 100644
--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -6,17 +6,54 @@
 #define _NF_CONNTRACK_ECACHE_H
 #include <net/netfilter/nf_conntrack.h>
 
-#include <linux/notifier.h>
-#include <linux/interrupt.h>
 #include <net/net_namespace.h>
 #include <net/netfilter/nf_conntrack_expect.h>
+#include <linux/netfilter/nf_conntrack_common.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+/* Connection tracking event types */
+enum ip_conntrack_events
+{
+	IPCT_NEW		= 0,	/* new conntrack */
+	IPCT_RELATED		= 1,	/* related conntrack */
+	IPCT_DESTROY		= 2,	/* destroyed conntrack */
+	IPCT_STATUS		= 3,	/* status has changed */
+	IPCT_PROTOINFO		= 4,	/* protocol information has changed */
+	IPCT_HELPER		= 5,	/* new helper has been set */
+	IPCT_MARK		= 6,	/* new mark has been set */
+	IPCT_NATSEQADJ		= 7,	/* NAT is doing sequence adjustment */
+	IPCT_SECMARK		= 8,	/* new security mark has been set */
+};
+
+enum ip_conntrack_expect_events {
+	IPEXP_NEW		= 0,	/* new expectation */
+};
 
-#ifdef CONFIG_NF_CONNTRACK_EVENTS
 struct nf_conntrack_ecache {
-	struct nf_conn *ct;
-	unsigned int events;
+	unsigned long cache;		/* bitops want long */
+	unsigned long missed;		/* missed events */
+	u32 pid;			/* netlink pid of destroyer */
+};
+
+static inline struct nf_conntrack_ecache *
+nf_ct_ecache_find(const struct nf_conn *ct)
+{
+	return nf_ct_ext_find(ct, NF_CT_EXT_ECACHE);
+}
+
+static inline struct nf_conntrack_ecache *
+nf_ct_ecache_ext_add(struct nf_conn *ct, gfp_t gfp)
+{
+	struct net *net = nf_ct_net(ct);
+
+	if (!net->ct.sysctl_events)
+		return NULL;
+
+	return nf_ct_ext_add(ct, NF_CT_EXT_ECACHE, gfp);
 };
 
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
 /* This structure is passed to event handler */
 struct nf_ct_event {
 	struct nf_conn *ct;
@@ -24,47 +61,96 @@ struct nf_ct_event {
 	int report;
 };
 
-extern struct atomic_notifier_head nf_conntrack_chain;
-extern int nf_conntrack_register_notifier(struct notifier_block *nb);
-extern int nf_conntrack_unregister_notifier(struct notifier_block *nb);
+struct nf_ct_event_notifier {
+	int (*fcn)(unsigned int events, struct nf_ct_event *item);
+};
+
+extern struct nf_ct_event_notifier *nf_conntrack_event_cb;
+extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb);
+extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb);
 
-extern void nf_ct_deliver_cached_events(const struct nf_conn *ct);
-extern void __nf_ct_event_cache_init(struct nf_conn *ct);
-extern void nf_ct_event_cache_flush(struct net *net);
+extern void nf_ct_deliver_cached_events(struct nf_conn *ct);
 
 static inline void
 nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct)
 {
+	struct nf_conntrack_ecache *e;
+
+	if (nf_conntrack_event_cb == NULL)
+		return;
+
+	e = nf_ct_ecache_find(ct);
+	if (e == NULL)
+		return;
+
+	set_bit(event, &e->cache);
+}
+
+static inline int
+nf_conntrack_eventmask_report(unsigned int eventmask,
+			      struct nf_conn *ct,
+			      u32 pid,
+			      int report)
+{
+	int ret = 0;
 	struct net *net = nf_ct_net(ct);
-	struct nf_conntrack_ecache *ecache;
-
-	local_bh_disable();
-	ecache = per_cpu_ptr(net->ct.ecache, raw_smp_processor_id());
-	if (ct != ecache->ct)
-		__nf_ct_event_cache_init(ct);
-	ecache->events |= event;
-	local_bh_enable();
+	struct nf_ct_event_notifier *notify;
+	struct nf_conntrack_ecache *e;
+
+	rcu_read_lock();
+	notify = rcu_dereference(nf_conntrack_event_cb);
+	if (notify == NULL)
+		goto out_unlock;
+
+	if (!net->ct.sysctl_events)
+		goto out_unlock;
+
+	e = nf_ct_ecache_find(ct);
+	if (e == NULL)
+		goto out_unlock;
+
+	if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) {
+		struct nf_ct_event item = {
+			.ct 	= ct,
+			.pid	= e->pid ? e->pid : pid,
+			.report = report
+		};
+		/* This is a resent of a destroy event? If so, skip missed */
+		unsigned long missed = e->pid ? 0 : e->missed;
+
+		ret = notify->fcn(eventmask | missed, &item);
+		if (unlikely(ret < 0 || missed)) {
+			spin_lock_bh(&ct->lock);
+			if (ret < 0) {
+				/* This is a destroy event that has been
+				 * triggered by a process, we store the PID
+				 * to include it in the retransmission. */
+				if (eventmask & (1 << IPCT_DESTROY) &&
+				    e->pid == 0 && pid != 0)
+					e->pid = pid;
+				else
+					e->missed |= eventmask;
+			} else
+				e->missed &= ~missed;
+			spin_unlock_bh(&ct->lock);
+		}
+	}
+out_unlock:
+	rcu_read_unlock();
+	return ret;
 }
 
-static inline void
-nf_conntrack_event_report(enum ip_conntrack_events event,
-			  struct nf_conn *ct,
-			  u32 pid,
-			  int report)
+static inline int
+nf_conntrack_event_report(enum ip_conntrack_events event, struct nf_conn *ct,
+			  u32 pid, int report)
 {
-	struct nf_ct_event item = {
-		.ct 	= ct,
-		.pid	= pid,
-		.report = report
-	};
-	if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
-		atomic_notifier_call_chain(&nf_conntrack_chain, event, &item);
+	return nf_conntrack_eventmask_report(1 << event, ct, pid, report);
 }
 
-static inline void
+static inline int
 nf_conntrack_event(enum ip_conntrack_events event, struct nf_conn *ct)
 {
-	nf_conntrack_event_report(event, ct, 0, 0);
+	return nf_conntrack_eventmask_report(1 << event, ct, 0, 0);
 }
 
 struct nf_exp_event {
@@ -73,9 +159,13 @@ struct nf_exp_event {
 	int report;
 };
 
-extern struct atomic_notifier_head nf_ct_expect_chain;
-extern int nf_ct_expect_register_notifier(struct notifier_block *nb);
-extern int nf_ct_expect_unregister_notifier(struct notifier_block *nb);
+struct nf_exp_event_notifier {
+	int (*fcn)(unsigned int events, struct nf_exp_event *item);
+};
+
+extern struct nf_exp_event_notifier *nf_expect_event_cb;
+extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb);
+extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb);
 
 static inline void
 nf_ct_expect_event_report(enum ip_conntrack_expect_events event,
@@ -83,12 +173,27 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event,
 			  u32 pid,
 			  int report)
 {
-	struct nf_exp_event item = {
-		.exp	= exp,
-		.pid	= pid,
-		.report = report
-	};
-	atomic_notifier_call_chain(&nf_ct_expect_chain, event, &item);
+	struct net *net = nf_ct_exp_net(exp);
+	struct nf_exp_event_notifier *notify;
+
+	rcu_read_lock();
+	notify = rcu_dereference(nf_expect_event_cb);
+	if (notify == NULL)
+		goto out_unlock;
+
+	if (!net->ct.sysctl_events)
+		goto out_unlock;
+
+	{
+		struct nf_exp_event item = {
+			.exp	= exp,
+			.pid	= pid,
+			.report = report
+		};
+		notify->fcn(1 << event, &item);
+	}
+out_unlock:
+	rcu_read_unlock();
 }
 
 static inline void
@@ -105,12 +210,16 @@ extern void nf_conntrack_ecache_fini(struct net *net);
 
 static inline void nf_conntrack_event_cache(enum ip_conntrack_events event,
 					    struct nf_conn *ct) {}
-static inline void nf_conntrack_event(enum ip_conntrack_events event,
-				      struct nf_conn *ct) {}
-static inline void nf_conntrack_event_report(enum ip_conntrack_events event,
-					     struct nf_conn *ct,
-					     u32 pid,
-					     int report) {}
+static inline int nf_conntrack_eventmask_report(unsigned int eventmask,
+						struct nf_conn *ct,
+						u32 pid,
+						int report) { return 0; }
+static inline int nf_conntrack_event(enum ip_conntrack_events event,
+				     struct nf_conn *ct) { return 0; }
+static inline int nf_conntrack_event_report(enum ip_conntrack_events event,
+					    struct nf_conn *ct,
+					    u32 pid,
+					    int report) { return 0; }
 static inline void nf_ct_deliver_cached_events(const struct nf_conn *ct) {}
 static inline void nf_ct_expect_event(enum ip_conntrack_expect_events event,
 				      struct nf_conntrack_expect *exp) {}
@@ -118,7 +227,6 @@ static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events e,
 					     struct nf_conntrack_expect *exp,
  					     u32 pid,
  					     int report) {}
-static inline void nf_ct_event_cache_flush(struct net *net) {}
 
 static inline int nf_conntrack_ecache_init(struct net *net)
 {
diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h
index da8ee52613a..7f8fc5d123c 100644
--- a/include/net/netfilter/nf_conntrack_extend.h
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -8,12 +8,14 @@ enum nf_ct_ext_id
 	NF_CT_EXT_HELPER,
 	NF_CT_EXT_NAT,
 	NF_CT_EXT_ACCT,
+	NF_CT_EXT_ECACHE,
 	NF_CT_EXT_NUM,
 };
 
 #define NF_CT_EXT_HELPER_TYPE struct nf_conn_help
 #define NF_CT_EXT_NAT_TYPE struct nf_conn_nat
 #define NF_CT_EXT_ACCT_TYPE struct nf_conn_counter
+#define NF_CT_EXT_ECACHE_TYPE struct nf_conntrack_ecache
 
 /* Extensions: optional stuff which isn't permanently in struct. */
 struct nf_ct_ext {
diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h
index ee2a4b369a0..1b706800092 100644
--- a/include/net/netfilter/nf_conntrack_helper.h
+++ b/include/net/netfilter/nf_conntrack_helper.h
@@ -50,6 +50,8 @@ extern struct nf_conn_help *nf_ct_helper_ext_add(struct nf_conn *ct, gfp_t gfp);
 
 extern int __nf_ct_try_assign_helper(struct nf_conn *ct, gfp_t flags);
 
+extern void nf_ct_helper_destroy(struct nf_conn *ct);
+
 static inline struct nf_conn_help *nfct_help(const struct nf_conn *ct)
 {
 	return nf_ct_ext_find(ct, NF_CT_EXT_HELPER);
diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h
index ba32ed7bdab..3767fb41e54 100644
--- a/include/net/netfilter/nf_conntrack_l4proto.h
+++ b/include/net/netfilter/nf_conntrack_l4proto.h
@@ -59,11 +59,11 @@ struct nf_conntrack_l4proto
 			   const struct nf_conntrack_tuple *);
 
 	/* Print out the private part of the conntrack. */
-	int (*print_conntrack)(struct seq_file *s, const struct nf_conn *);
+	int (*print_conntrack)(struct seq_file *s, struct nf_conn *);
 
 	/* convert protoinfo to nfnetink attributes */
 	int (*to_nlattr)(struct sk_buff *skb, struct nlattr *nla,
-			 const struct nf_conn *ct);
+			 struct nf_conn *ct);
 	/* Calculate protoinfo nlattr size */
 	int (*nlattr_size)(void);
 
diff --git a/include/net/netlink.h b/include/net/netlink.h
index eddb50289d6..007bdb07dab 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -940,6 +940,15 @@ static inline u64 nla_get_u64(const struct nlattr *nla)
 }
 
 /**
+ * nla_get_be64 - return payload of __be64 attribute
+ * @nla: __be64 netlink attribute
+ */
+static inline __be64 nla_get_be64(const struct nlattr *nla)
+{
+	return *(__be64 *) nla_data(nla);
+}
+
+/**
  * nla_get_flag - return payload of flag attribute
  * @nla: flag netlink attribute
  */
diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h
index 9dc58402bc0..ba1ba0c5efd 100644
--- a/include/net/netns/conntrack.h
+++ b/include/net/netns/conntrack.h
@@ -14,16 +14,17 @@ struct netns_ct {
 	struct hlist_nulls_head	*hash;
 	struct hlist_head	*expect_hash;
 	struct hlist_nulls_head	unconfirmed;
+	struct hlist_nulls_head	dying;
 	struct ip_conntrack_stat *stat;
-#ifdef CONFIG_NF_CONNTRACK_EVENTS
-	struct nf_conntrack_ecache *ecache;
-#endif
+	int			sysctl_events;
+	unsigned int		sysctl_events_retry_timeout;
 	int			sysctl_acct;
 	int			sysctl_checksum;
 	unsigned int		sysctl_log_invalid; /* Log invalid packets */
 #ifdef CONFIG_SYSCTL
 	struct ctl_table_header	*sysctl_header;
 	struct ctl_table_header	*acct_sysctl_header;
+	struct ctl_table_header	*event_sysctl_header;
 #endif
 	int			hash_vmalloc;
 	int			expect_vmalloc;
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index e37fe3129c1..82a3191375f 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -41,16 +41,17 @@ static inline void *qdisc_priv(struct Qdisc *q)
 typedef u64	psched_time_t;
 typedef long	psched_tdiff_t;
 
-/* Avoid doing 64 bit divide by 1000 */
-#define PSCHED_US2NS(x)			((s64)(x) << 10)
-#define PSCHED_NS2US(x)			((x) >> 10)
+/* Avoid doing 64 bit divide */
+#define PSCHED_SHIFT			6
+#define PSCHED_TICKS2NS(x)		((s64)(x) << PSCHED_SHIFT)
+#define PSCHED_NS2TICKS(x)		((x) >> PSCHED_SHIFT)
 
-#define PSCHED_TICKS_PER_SEC		PSCHED_NS2US(NSEC_PER_SEC)
+#define PSCHED_TICKS_PER_SEC		PSCHED_NS2TICKS(NSEC_PER_SEC)
 #define PSCHED_PASTPERFECT		0
 
 static inline psched_time_t psched_get_time(void)
 {
-	return PSCHED_NS2US(ktime_to_ns(ktime_get()));
+	return PSCHED_NS2TICKS(ktime_to_ns(ktime_get()));
 }
 
 static inline psched_tdiff_t
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
new file mode 100644
index 00000000000..47995b81c5d
--- /dev/null
+++ b/include/net/regulatory.h
@@ -0,0 +1,101 @@
+#ifndef __NET_REGULATORY_H
+#define __NET_REGULATORY_H
+/*
+ * regulatory support structures
+ *
+ * Copyright 2008-2009	Luis R. Rodriguez <lrodriguez@atheros.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/**
+ * enum environment_cap - Environment parsed from country IE
+ * @ENVIRON_ANY: indicates country IE applies to both indoor and
+ *	outdoor operation.
+ * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
+ * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
+ */
+enum environment_cap {
+	ENVIRON_ANY,
+	ENVIRON_INDOOR,
+	ENVIRON_OUTDOOR,
+};
+
+/**
+ * struct regulatory_request - used to keep track of regulatory requests
+ *
+ * @wiphy_idx: this is set if this request's initiator is
+ * 	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ * 	can be used by the wireless core to deal with conflicts
+ * 	and potentially inform users of which devices specifically
+ * 	cased the conflicts.
+ * @initiator: indicates who sent this request, could be any of
+ * 	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
+ * 	regulatory domain. We have a few special codes:
+ * 	00 - World regulatory domain
+ * 	99 - built by driver but a specific alpha2 cannot be determined
+ * 	98 - result of an intersection between two regulatory domains
+ * @intersect: indicates whether the wireless core should intersect
+ * 	the requested regulatory domain with the presently set regulatory
+ * 	domain.
+ * @country_ie_checksum: checksum of the last processed and accepted
+ * 	country IE
+ * @country_ie_env: lets us know if the AP is telling us we are outdoor,
+ * 	indoor, or if it doesn't matter
+ * @list: used to insert into the reg_requests_list linked list
+ */
+struct regulatory_request {
+	int wiphy_idx;
+	enum nl80211_reg_initiator initiator;
+	char alpha2[2];
+	bool intersect;
+	u32 country_ie_checksum;
+	enum environment_cap country_ie_env;
+	struct list_head list;
+};
+
+struct ieee80211_freq_range {
+	u32 start_freq_khz;
+	u32 end_freq_khz;
+	u32 max_bandwidth_khz;
+};
+
+struct ieee80211_power_rule {
+	u32 max_antenna_gain;
+	u32 max_eirp;
+};
+
+struct ieee80211_reg_rule {
+	struct ieee80211_freq_range freq_range;
+	struct ieee80211_power_rule power_rule;
+	u32 flags;
+};
+
+struct ieee80211_regdomain {
+	u32 n_reg_rules;
+	char alpha2[2];
+	struct ieee80211_reg_rule reg_rules[];
+};
+
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
+{							\
+	.freq_range.start_freq_khz = MHZ_TO_KHZ(start),	\
+	.freq_range.end_freq_khz = MHZ_TO_KHZ(end),	\
+	.freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw),	\
+	.power_rule.max_antenna_gain = DBI_TO_MBI(gain),\
+	.power_rule.max_eirp = DBM_TO_MBM(eirp),	\
+	.flags = reg_flags,				\
+}
+
+#endif
diff --git a/include/net/route.h b/include/net/route.h
index 4e8cae0e584..40f6346ef49 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -210,7 +210,7 @@ static inline struct inet_peer *rt_get_peer(struct rtable *rt)
 
 static inline int inet_iif(const struct sk_buff *skb)
 {
-	return skb->rtable->rt_iif;
+	return skb_rtable(skb)->rt_iif;
 }
 
 #endif	/* _ROUTE_H */
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 23f08fe1d50..edfcacf3250 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1939,10 +1939,8 @@ void sctp_association_free(struct sctp_association *);
 void sctp_association_put(struct sctp_association *);
 void sctp_association_hold(struct sctp_association *);
 
-struct sctp_transport *sctp_assoc_choose_init_transport(
-	struct sctp_association *);
-struct sctp_transport *sctp_assoc_choose_shutdown_transport(
-	struct sctp_association *);
+struct sctp_transport *sctp_assoc_choose_alter_transport(
+	struct sctp_association *, struct sctp_transport *);
 void sctp_assoc_update_retran_path(struct sctp_association *);
 struct sctp_transport *sctp_assoc_lookup_paddr(const struct sctp_association *,
 					  const union sctp_addr *);
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index b259fc5798f..1580c04f68b 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -147,6 +147,8 @@ enum sctp_optname {
 #define SCTP_GET_LOCAL_ADDRS	SCTP_GET_LOCAL_ADDRS
 	SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */
 #define SCTP_SOCKOPT_CONNECTX	SCTP_SOCKOPT_CONNECTX
+	SCTP_SOCKOPT_CONNECTX3, /* CONNECTX requests. (new implementation) */
+#define SCTP_SOCKOPT_CONNECTX3	SCTP_SOCKOPT_CONNECTX3
 };
 
 /*
diff --git a/include/net/snmp.h b/include/net/snmp.h
index 57c93628695..8c842e06bec 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -153,6 +153,11 @@ struct linux_xfrm_mib {
 		per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field]--; \
 		put_cpu(); \
 	} while (0)
+#define SNMP_ADD_STATS(mib, field, addend) 	\
+	do { \
+		per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field] += addend; \
+		put_cpu(); \
+	} while (0)
 #define SNMP_ADD_STATS_BH(mib, field, addend) 	\
 	(per_cpu_ptr(mib[0], raw_smp_processor_id())->mibs[field] += addend)
 #define SNMP_ADD_STATS_USER(mib, field, addend) 	\
@@ -160,5 +165,17 @@ struct linux_xfrm_mib {
 		per_cpu_ptr(mib[1], get_cpu())->mibs[field] += addend; \
 		put_cpu(); \
 	} while (0)
-
+#define SNMP_UPD_PO_STATS(mib, basefield, addend)	\
+	do { \
+		__typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], get_cpu());\
+		ptr->mibs[basefield##PKTS]++; \
+		ptr->mibs[basefield##OCTETS] += addend;\
+		put_cpu(); \
+	} while (0)
+#define SNMP_UPD_PO_STATS_BH(mib, basefield, addend)	\
+	do { \
+		__typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], raw_smp_processor_id());\
+		ptr->mibs[basefield##PKTS]++; \
+		ptr->mibs[basefield##OCTETS] += addend;\
+	} while (0)
 #endif
diff --git a/include/net/sock.h b/include/net/sock.h
index 4bb1ff9fd15..95bd3fd75f9 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -218,9 +218,11 @@ struct sock {
 #define sk_hash			__sk_common.skc_hash
 #define sk_prot			__sk_common.skc_prot
 #define sk_net			__sk_common.skc_net
+	kmemcheck_bitfield_begin(flags);
 	unsigned char		sk_shutdown : 2,
 				sk_no_check : 2,
 				sk_userlocks : 4;
+	kmemcheck_bitfield_end(flags);
 	unsigned char		sk_protocol;
 	unsigned short		sk_type;
 	int			sk_rcvbuf;
@@ -1217,9 +1219,13 @@ static inline int skb_copy_to_page(struct sock *sk, char __user *from,
 
 static inline void skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
 {
-	sock_hold(sk);
 	skb->sk = sk;
 	skb->destructor = sock_wfree;
+	/*
+	 * We used to take a refcount on sk, but following operation
+	 * is enough to guarantee sk_free() wont free this sock until
+	 * all in-flight packets are completed
+	 */
 	atomic_add(skb->truesize, &sk->sk_wmem_alloc);
 }
 
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 646dbe3962e..19f4150f4d4 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -266,6 +266,19 @@ static inline int tcp_too_many_orphans(struct sock *sk, int num)
 		 atomic_read(&tcp_memory_allocated) > sysctl_tcp_mem[2]);
 }
 
+/* syncookies: remember time of last synqueue overflow */
+static inline void tcp_synq_overflow(struct sock *sk)
+{
+	tcp_sk(sk)->rx_opt.ts_recent_stamp = jiffies;
+}
+
+/* syncookies: no recent synqueue overflow on this listening socket? */
+static inline int tcp_synq_no_recent_overflow(const struct sock *sk)
+{
+	unsigned long last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp;
+	return time_after(jiffies, last_overflow + TCP_TIMEOUT_INIT);
+}
+
 extern struct proto tcp_prot;
 
 #define TCP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.tcp_statistics, field)
@@ -889,30 +902,32 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	if (!sysctl_tcp_low_latency && tp->ucopy.task) {
-		__skb_queue_tail(&tp->ucopy.prequeue, skb);
-		tp->ucopy.memory += skb->truesize;
-		if (tp->ucopy.memory > sk->sk_rcvbuf) {
-			struct sk_buff *skb1;
-
-			BUG_ON(sock_owned_by_user(sk));
-
-			while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
-				sk_backlog_rcv(sk, skb1);
-				NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPPREQUEUEDROPPED);
-			}
-
-			tp->ucopy.memory = 0;
-		} else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
-			wake_up_interruptible(sk->sk_sleep);
-			if (!inet_csk_ack_scheduled(sk))
-				inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
-						          (3 * tcp_rto_min(sk)) / 4,
-							  TCP_RTO_MAX);
+	if (sysctl_tcp_low_latency || !tp->ucopy.task)
+		return 0;
+
+	__skb_queue_tail(&tp->ucopy.prequeue, skb);
+	tp->ucopy.memory += skb->truesize;
+	if (tp->ucopy.memory > sk->sk_rcvbuf) {
+		struct sk_buff *skb1;
+
+		BUG_ON(sock_owned_by_user(sk));
+
+		while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
+			sk_backlog_rcv(sk, skb1);
+			NET_INC_STATS_BH(sock_net(sk),
+					 LINUX_MIB_TCPPREQUEUEDROPPED);
 		}
-		return 1;
+
+		tp->ucopy.memory = 0;
+	} else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
+		wake_up_interruptible_poll(sk->sk_sleep,
+					   POLLIN | POLLRDNORM | POLLRDBAND);
+		if (!inet_csk_ack_scheduled(sk))
+			inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
+						  (3 * tcp_rto_min(sk)) / 4,
+						  TCP_RTO_MAX);
 	}
-	return 0;
+	return 1;
 }
 
 
diff --git a/include/net/wimax.h b/include/net/wimax.h
index 6b3824edb39..2af7bf839f2 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -253,7 +253,6 @@
 struct net_device;
 struct genl_info;
 struct wimax_dev;
-struct input_dev;
 
 /**
  * struct wimax_dev - Generic WiMAX device
@@ -293,8 +292,8 @@ struct input_dev;
  *     See wimax_reset()'s documentation.
  *
  * @name: [fill] A way to identify this device. We need to register a
- *     name with many subsystems (input for RFKILL, workqueue
- *     creation, etc). We can't use the network device name as that
+ *     name with many subsystems (rfkill, workqueue creation, etc).
+ *     We can't use the network device name as that
  *     might change and in some instances we don't know it yet (until
  *     we don't call register_netdev()). So we generate an unique one
  *     using the driver name and device bus id, place it here and use
@@ -316,9 +315,6 @@ struct input_dev;
  *
  * @rfkill: [private] integration into the RF-Kill infrastructure.
  *
- * @rfkill_input: [private] virtual input device to process the
- *     hardware RF Kill switches.
- *
  * @rf_sw: [private] State of the software radio switch (OFF/ON)
  *
  * @rf_hw: [private] State of the hardware radio switch (OFF/ON)
diff --git a/include/net/wireless.h b/include/net/wireless.h
deleted file mode 100644
index 64a76208580..00000000000
--- a/include/net/wireless.h
+++ /dev/null
@@ -1,472 +0,0 @@
-#ifndef __NET_WIRELESS_H
-#define __NET_WIRELESS_H
-
-/*
- * 802.11 device management
- *
- * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
- */
-
-#include <linux/netdevice.h>
-#include <linux/debugfs.h>
-#include <linux/list.h>
-#include <linux/ieee80211.h>
-#include <net/cfg80211.h>
-
-/**
- * enum ieee80211_band - supported frequency bands
- *
- * The bands are assigned this way because the supported
- * bitrates differ in these bands.
- *
- * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
- * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
- */
-enum ieee80211_band {
-	IEEE80211_BAND_2GHZ,
-	IEEE80211_BAND_5GHZ,
-
-	/* keep last */
-	IEEE80211_NUM_BANDS
-};
-
-/**
- * enum ieee80211_channel_flags - channel flags
- *
- * Channel flags set by the regulatory control code.
- *
- * @IEEE80211_CHAN_DISABLED: This channel is disabled.
- * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
- *	on this channel.
- * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
- * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
- * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel
- * 	is not permitted.
- * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel
- * 	is not permitted.
- */
-enum ieee80211_channel_flags {
-	IEEE80211_CHAN_DISABLED		= 1<<0,
-	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
-	IEEE80211_CHAN_NO_IBSS		= 1<<2,
-	IEEE80211_CHAN_RADAR		= 1<<3,
-	IEEE80211_CHAN_NO_FAT_ABOVE	= 1<<4,
-	IEEE80211_CHAN_NO_FAT_BELOW	= 1<<5,
-};
-
-/**
- * struct ieee80211_channel - channel definition
- *
- * This structure describes a single channel for use
- * with cfg80211.
- *
- * @center_freq: center frequency in MHz
- * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
- * @hw_value: hardware-specific value for the channel
- * @flags: channel flags from &enum ieee80211_channel_flags.
- * @orig_flags: channel flags at registration time, used by regulatory
- *	code to support devices with additional restrictions
- * @band: band this channel belongs to.
- * @max_antenna_gain: maximum antenna gain in dBi
- * @max_power: maximum transmission power (in dBm)
- * @beacon_found: helper to regulatory code to indicate when a beacon
- *	has been found on this channel. Use regulatory_hint_found_beacon()
- *	to enable this, this is is useful only on 5 GHz band.
- * @orig_mag: internal use
- * @orig_mpwr: internal use
- */
-struct ieee80211_channel {
-	enum ieee80211_band band;
-	u16 center_freq;
-	u8 max_bandwidth;
-	u16 hw_value;
-	u32 flags;
-	int max_antenna_gain;
-	int max_power;
-	bool beacon_found;
-	u32 orig_flags;
-	int orig_mag, orig_mpwr;
-};
-
-/**
- * enum ieee80211_rate_flags - rate flags
- *
- * Hardware/specification flags for rates. These are structured
- * in a way that allows using the same bitrate structure for
- * different bands/PHY modes.
- *
- * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
- *	preamble on this bitrate; only relevant in 2.4GHz band and
- *	with CCK rates.
- * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
- *	when used with 802.11a (on the 5 GHz band); filled by the
- *	core code when registering the wiphy.
- * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
- *	when used with 802.11b (on the 2.4 GHz band); filled by the
- *	core code when registering the wiphy.
- * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
- *	when used with 802.11g (on the 2.4 GHz band); filled by the
- *	core code when registering the wiphy.
- * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
- */
-enum ieee80211_rate_flags {
-	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
-	IEEE80211_RATE_MANDATORY_A	= 1<<1,
-	IEEE80211_RATE_MANDATORY_B	= 1<<2,
-	IEEE80211_RATE_MANDATORY_G	= 1<<3,
-	IEEE80211_RATE_ERP_G		= 1<<4,
-};
-
-/**
- * struct ieee80211_rate - bitrate definition
- *
- * This structure describes a bitrate that an 802.11 PHY can
- * operate with. The two values @hw_value and @hw_value_short
- * are only for driver use when pointers to this structure are
- * passed around.
- *
- * @flags: rate-specific flags
- * @bitrate: bitrate in units of 100 Kbps
- * @hw_value: driver/hardware value for this rate
- * @hw_value_short: driver/hardware value for this rate when
- *	short preamble is used
- */
-struct ieee80211_rate {
-	u32 flags;
-	u16 bitrate;
-	u16 hw_value, hw_value_short;
-};
-
-/**
- * struct ieee80211_sta_ht_cap - STA's HT capabilities
- *
- * This structure describes most essential parameters needed
- * to describe 802.11n HT capabilities for an STA.
- *
- * @ht_supported: is HT supported by the STA
- * @cap: HT capabilities map as described in 802.11n spec
- * @ampdu_factor: Maximum A-MPDU length factor
- * @ampdu_density: Minimum A-MPDU spacing
- * @mcs: Supported MCS rates
- */
-struct ieee80211_sta_ht_cap {
-	u16 cap; /* use IEEE80211_HT_CAP_ */
-	bool ht_supported;
-	u8 ampdu_factor;
-	u8 ampdu_density;
-	struct ieee80211_mcs_info mcs;
-};
-
-/**
- * struct ieee80211_supported_band - frequency band definition
- *
- * This structure describes a frequency band a wiphy
- * is able to operate in.
- *
- * @channels: Array of channels the hardware can operate in
- *	in this band.
- * @band: the band this structure represents
- * @n_channels: Number of channels in @channels
- * @bitrates: Array of bitrates the hardware can operate with
- *	in this band. Must be sorted to give a valid "supported
- *	rates" IE, i.e. CCK rates first, then OFDM.
- * @n_bitrates: Number of bitrates in @bitrates
- */
-struct ieee80211_supported_band {
-	struct ieee80211_channel *channels;
-	struct ieee80211_rate *bitrates;
-	enum ieee80211_band band;
-	int n_channels;
-	int n_bitrates;
-	struct ieee80211_sta_ht_cap ht_cap;
-};
-
-/**
- * struct wiphy - wireless hardware description
- * @idx: the wiphy index assigned to this item
- * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @custom_regulatory: tells us the driver for this device
- * 	has its own custom regulatory domain and cannot identify the
- * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
- * 	we will disregard the first regulatory hint (when the
- * 	initiator is %REGDOM_SET_BY_CORE).
- * @strict_regulatory: tells us the driver for this device will ignore
- * 	regulatory domain settings until it gets its own regulatory domain
- * 	via its regulatory_hint(). After its gets its own regulatory domain
- * 	it will only allow further regulatory domain settings to further
- * 	enhance compliance. For example if channel 13 and 14 are disabled
- * 	by this regulatory domain no user regulatory domain can enable these
- * 	channels at a later time. This can be used for devices which do not
- * 	have calibration information gauranteed for frequencies or settings
- * 	outside of its regulatory domain.
- * @reg_notifier: the driver's regulatory notification callback
- * @regd: the driver's regulatory domain, if one was requested via
- * 	the regulatory_hint() API. This can be used by the driver
- *	on the reg_notifier() if it chooses to ignore future
- *	regulatory domain changes caused by other drivers.
- * @signal_type: signal type reported in &struct cfg80211_bss.
- */
-struct wiphy {
-	/* assign these fields before you register the wiphy */
-
-	/* permanent MAC address */
-	u8 perm_addr[ETH_ALEN];
-
-	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
-	u16 interface_modes;
-
-	bool custom_regulatory;
-	bool strict_regulatory;
-
-	enum cfg80211_signal_type signal_type;
-
-	int bss_priv_size;
-	u8 max_scan_ssids;
-
-	/* If multiple wiphys are registered and you're handed e.g.
-	 * a regular netdev with assigned ieee80211_ptr, you won't
-	 * know whether it points to a wiphy your driver has registered
-	 * or not. Assign this to something global to your driver to
-	 * help determine whether you own this wiphy or not. */
-	void *privid;
-
-	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
-
-	/* Lets us get back the wiphy on the callback */
-	int (*reg_notifier)(struct wiphy *wiphy,
-			    struct regulatory_request *request);
-
-	/* fields below are read-only, assigned by cfg80211 */
-
-	const struct ieee80211_regdomain *regd;
-
-	/* the item in /sys/class/ieee80211/ points to this,
-	 * you need use set_wiphy_dev() (see below) */
-	struct device dev;
-
-	/* dir in debugfs: ieee80211/<wiphyname> */
-	struct dentry *debugfsdir;
-
-	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
-};
-
-/** struct wireless_dev - wireless per-netdev state
- *
- * This structure must be allocated by the driver/stack
- * that uses the ieee80211_ptr field in struct net_device
- * (this is intentional so it can be allocated along with
- * the netdev.)
- *
- * @wiphy: pointer to hardware description
- * @iftype: interface type
- */
-struct wireless_dev {
-	struct wiphy *wiphy;
-	enum nl80211_iftype iftype;
-
-	/* private to the generic wireless code */
-	struct list_head list;
-	struct net_device *netdev;
-};
-
-/**
- * wiphy_priv - return priv from wiphy
- */
-static inline void *wiphy_priv(struct wiphy *wiphy)
-{
-	BUG_ON(!wiphy);
-	return &wiphy->priv;
-}
-
-/**
- * set_wiphy_dev - set device pointer for wiphy
- */
-static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
-{
-	wiphy->dev.parent = dev;
-}
-
-/**
- * wiphy_dev - get wiphy dev pointer
- */
-static inline struct device *wiphy_dev(struct wiphy *wiphy)
-{
-	return wiphy->dev.parent;
-}
-
-/**
- * wiphy_name - get wiphy name
- */
-static inline const char *wiphy_name(struct wiphy *wiphy)
-{
-	return dev_name(&wiphy->dev);
-}
-
-/**
- * wdev_priv - return wiphy priv from wireless_dev
- */
-static inline void *wdev_priv(struct wireless_dev *wdev)
-{
-	BUG_ON(!wdev);
-	return wiphy_priv(wdev->wiphy);
-}
-
-/**
- * wiphy_new - create a new wiphy for use with cfg80211
- *
- * create a new wiphy and associate the given operations with it.
- * @sizeof_priv bytes are allocated for private use.
- *
- * the returned pointer must be assigned to each netdev's
- * ieee80211_ptr for proper operation.
- */
-struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv);
-
-/**
- * wiphy_register - register a wiphy with cfg80211
- *
- * register the given wiphy
- *
- * Returns a non-negative wiphy index or a negative error code.
- */
-extern int wiphy_register(struct wiphy *wiphy);
-
-/**
- * wiphy_unregister - deregister a wiphy from cfg80211
- *
- * unregister a device with the given priv pointer.
- * After this call, no more requests can be made with this priv
- * pointer, but the call may sleep to wait for an outstanding
- * request that is being handled.
- */
-extern void wiphy_unregister(struct wiphy *wiphy);
-
-/**
- * wiphy_free - free wiphy
- */
-extern void wiphy_free(struct wiphy *wiphy);
-
-/**
- * ieee80211_channel_to_frequency - convert channel number to frequency
- */
-extern int ieee80211_channel_to_frequency(int chan);
-
-/**
- * ieee80211_frequency_to_channel - convert frequency to channel number
- */
-extern int ieee80211_frequency_to_channel(int freq);
-
-/*
- * Name indirection necessary because the ieee80211 code also has
- * a function named "ieee80211_get_channel", so if you include
- * cfg80211's header file you get cfg80211's version, if you try
- * to include both header files you'll (rightfully!) get a symbol
- * clash.
- */
-extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
-							 int freq);
-/**
- * ieee80211_get_channel - get channel struct from wiphy for specified frequency
- */
-static inline struct ieee80211_channel *
-ieee80211_get_channel(struct wiphy *wiphy, int freq)
-{
-	return __ieee80211_get_channel(wiphy, freq);
-}
-
-/**
- * ieee80211_get_response_rate - get basic rate for a given rate
- *
- * @sband: the band to look for rates in
- * @basic_rates: bitmap of basic rates
- * @bitrate: the bitrate for which to find the basic rate
- *
- * This function returns the basic rate corresponding to a given
- * bitrate, that is the next lower bitrate contained in the basic
- * rate map, which is, for this function, given as a bitmap of
- * indices of rates in the band's bitrate table.
- */
-struct ieee80211_rate *
-ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
-			    u32 basic_rates, int bitrate);
-
-/**
- * regulatory_hint - driver hint to the wireless core a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- *	conflicts)
- * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
- * 	should be in. If @rd is set this should be NULL. Note that if you
- * 	set this to NULL you should still set rd->alpha2 to some accepted
- * 	alpha2.
- *
- * Wireless drivers can use this function to hint to the wireless core
- * what it believes should be the current regulatory domain by
- * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
- * domain should be in or by providing a completely build regulatory domain.
- * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
- * for a regulatory domain structure for the respective country.
- *
- * The wiphy must have been registered to cfg80211 prior to this call.
- * For cfg80211 drivers this means you must first use wiphy_register(),
- * for mac80211 drivers you must first use ieee80211_register_hw().
- *
- * Drivers should check the return value, its possible you can get
- * an -ENOMEM.
- */
-extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
-
-/**
- * regulatory_hint_11d - hints a country IE as a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- *	conflicts)
- * @country_ie: pointer to the country IE
- * @country_ie_len: length of the country IE
- *
- * We will intersect the rd with the what CRDA tells us should apply
- * for the alpha2 this country IE belongs to, this prevents APs from
- * sending us incorrect or outdated information against a country.
- */
-extern void regulatory_hint_11d(struct wiphy *wiphy,
-				u8 *country_ie,
-				u8 country_ie_len);
-/**
- * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
- * @wiphy: the wireless device we want to process the regulatory domain on
- * @regd: the custom regulatory domain to use for this wiphy
- *
- * Drivers can sometimes have custom regulatory domains which do not apply
- * to a specific country. Drivers can use this to apply such custom regulatory
- * domains. This routine must be called prior to wiphy registration. The
- * custom regulatory domain will be trusted completely and as such previous
- * default channel settings will be disregarded. If no rule is found for a
- * channel on the regulatory domain the channel will be disabled.
- */
-extern void wiphy_apply_custom_regulatory(
-	struct wiphy *wiphy,
-	const struct ieee80211_regdomain *regd);
-
-/**
- * freq_reg_info - get regulatory information for the given frequency
- * @wiphy: the wiphy for which we want to process this rule for
- * @center_freq: Frequency in KHz for which we want regulatory information for
- * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
- * 	you can set this to 0. If this frequency is allowed we then set
- * 	this value to the maximum allowed bandwidth.
- * @reg_rule: the regulatory rule which we have for this frequency
- *
- * Use this function to get the regulatory rule for a specific frequency on
- * a given wireless device. If the device has a specific regulatory domain
- * it wants to follow we respect that unless a country IE has been received
- * and processed already.
- *
- * Returns 0 if it was able to find a valid regulatory rule which does
- * apply to the given center_freq otherwise it returns non-zero. It will
- * also return -ERANGE if we determine the given center_freq does not even have
- * a regulatory rule for a frequency range in the center_freq's band. See
- * freq_in_rule_band() for our current definition of a band -- this is purely
- * subjective and right now its 802.11 specific.
- */
-extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
-			 const struct ieee80211_reg_rule **reg_rule);
-
-#endif /* __NET_WIRELESS_H */
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 2e9f5c0018a..736bca45088 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -994,7 +994,7 @@ static inline int __xfrm_policy_check2(struct sock *sk, int dir,
 		return __xfrm_policy_check(sk, ndir, skb, family);
 
 	return	(!net->xfrm.policy_count[dir] && !skb->sp) ||
-		(skb->dst->flags & DST_NOPOLICY) ||
+		(skb_dst(skb)->flags & DST_NOPOLICY) ||
 		__xfrm_policy_check(sk, ndir, skb, family);
 }
 
@@ -1048,7 +1048,7 @@ static inline int xfrm_route_forward(struct sk_buff *skb, unsigned short family)
 	struct net *net = dev_net(skb->dev);
 
 	return	!net->xfrm.policy_count[XFRM_POLICY_OUT] ||
-		(skb->dst->flags & DST_NOXFRM) ||
+		(skb_dst(skb)->flags & DST_NOXFRM) ||
 		__xfrm_route_forward(skb, family);
 }
 
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 666cc131732..b2410605b74 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -73,6 +73,7 @@ enum fip_state {
  * @link:	current link status for libfc.
  * @last_link:	last link state reported to libfc.
  * @map_dest:	use the FC_MAP mode for destination MAC addresses.
+ * @spma:	supports SPMA server-provided MACs mode
  * @dest_addr:	MAC address of the selected FC forwarder.
  * @ctl_src_addr: the native MAC address of our local port.
  * @data_src_addr: the assigned MAC address for the local port after FLOGI.
@@ -104,6 +105,7 @@ struct fcoe_ctlr {
 	u8 link;
 	u8 last_link;
 	u8 map_dest;
+	u8 spma;
 	u8 dest_addr[ETH_ALEN];
 	u8 ctl_src_addr[ETH_ALEN];
 	u8 data_src_addr[ETH_ALEN];
diff --git a/include/trace/events/napi.h b/include/trace/events/napi.h
new file mode 100644
index 00000000000..a8989c4547e
--- /dev/null
+++ b/include/trace/events/napi.h
@@ -0,0 +1,11 @@
+#ifndef _TRACE_NAPI_H_
+#define _TRACE_NAPI_H_
+
+#include <linux/netdevice.h>
+#include <linux/tracepoint.h>
+
+DECLARE_TRACE(napi_poll,
+	TP_PROTO(struct napi_struct *napi),
+	TP_ARGS(napi));
+
+#endif
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 00000000000..b5cc72fe046
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24		0
+#define PIN_MODE_DUMB_18_SPI		1
+#define PIN_MODE_DUMB_18_GPIO		2
+#define PIN_MODE_DUMB_16_SPI		3
+#define PIN_MODE_DUMB_16_GPIO		4
+#define PIN_MODE_DUMB_12_SPI_GPIO	5
+#define PIN_MODE_SMART_18_SPI		6
+#define PIN_MODE_SMART_16_SPI		7
+#define PIN_MODE_SMART_8_SPI_GPIO	8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565		0
+#define DUMB_MODE_RGB565_UPPER		1
+#define DUMB_MODE_RGB666		2
+#define DUMB_MODE_RGB666_UPPER		3
+#define DUMB_MODE_RGB444		4
+#define DUMB_MODE_RGB444_UPPER		5
+#define DUMB_MODE_RGB888		6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE	(800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565		0
+#define PIX_FMT_BGR565		1
+#define PIX_FMT_RGB1555		2
+#define PIX_FMT_BGR1555		3
+#define PIX_FMT_RGB888PACK	4
+#define PIX_FMT_BGR888PACK	5
+#define PIX_FMT_RGB888UNPACK	6
+#define PIX_FMT_BGR888UNPACK	7
+#define PIX_FMT_RGBA888		8
+#define PIX_FMT_BGRA888		9
+#define PIX_FMT_YUV422PACK	10
+#define PIX_FMT_YVU422PACK	11
+#define PIX_FMT_YUV422PLANAR	12
+#define PIX_FMT_YVU422PLANAR	13
+#define PIX_FMT_YUV420PLANAR	14
+#define PIX_FMT_YVU420PLANAR	15
+#define PIX_FMT_PSEUDOCOLOR	20
+#define PIX_FMT_UYVY422PACK	(0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+	struct fb_info		*info;
+
+	void __iomem		*reg_base;
+	dma_addr_t		fb_start_dma;
+	u32			pseudo_palette[16];
+
+	int			pix_fmt;
+	unsigned		is_blanked:1;
+	unsigned		panel_rbswap:1;
+	unsigned		active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+	char	id[16];
+
+	int		num_modes;
+	struct fb_videomode *modes;
+
+	/*
+	 * Pix_fmt
+	 */
+	unsigned	pix_fmt;
+
+	/*
+	 * I/O pin allocation.
+	 */
+	unsigned	io_pin_allocation_mode:4;
+
+	/*
+	 * Dumb panel -- assignment of R/G/B component info to the 24
+	 * available external data lanes.
+	 */
+	unsigned	dumb_mode:4;
+	unsigned	panel_rgb_reverse_lanes:1;
+
+	/*
+	 * Dumb panel -- GPIO output data.
+	 */
+	unsigned	gpio_output_mask:8;
+	unsigned	gpio_output_data:8;
+
+	/*
+	 * Dumb panel -- configurable output signal polarity.
+	 */
+	unsigned	invert_composite_blank:1;
+	unsigned	invert_pix_val_ena:1;
+	unsigned	invert_pixclock:1;
+	unsigned	invert_vsync:1;
+	unsigned	invert_hsync:1;
+	unsigned	panel_rbswap:1;
+	unsigned	active:1;
+	unsigned	enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */
diff --git a/include/video/s1d13xxxfb.h b/include/video/s1d13xxxfb.h
index c3b2a2aa714..f0736cff2ca 100644
--- a/include/video/s1d13xxxfb.h
+++ b/include/video/s1d13xxxfb.h
@@ -136,6 +136,15 @@
 #define S1DREG_DELAYOFF			0xFFFE
 #define S1DREG_DELAYON			0xFFFF
 
+#define BBLT_FIFO_EMPTY			0x00
+#define BBLT_FIFO_NOT_EMPTY		0x40
+#define BBLT_FIFO_NOT_FULL		0x30
+#define BBLT_FIFO_HALF_FULL		0x20
+#define BBLT_FIFO_FULL			0x10
+
+#define BBLT_SOLID_FILL			0x0c
+
+
 /* Note: all above defines should go in separate header files
    when implementing other S1D13xxx chip support. */
 
diff --git a/init/Kconfig b/init/Kconfig
index d3a50967c33..c4b3c6d51a7 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -616,13 +616,13 @@ config SYSFS_DEPRECATED
 	bool
 
 config SYSFS_DEPRECATED_V2
-	bool "Create deprecated sysfs layout for older userspace tools"
+	bool "remove sysfs features which may confuse old userspace tools"
 	depends on SYSFS
-	default y
+	default n
 	select SYSFS_DEPRECATED
 	help
 	  This option switches the layout of sysfs to the deprecated
-	  version.
+	  version. Do not use it on recent distributions.
 
 	  The current sysfs layout features a unified device tree at
 	  /sys/devices/, which is able to express a hierarchy between
@@ -809,14 +809,6 @@ config KALLSYMS_EXTRA_PASS
 	   you wait for kallsyms to be fixed.
 
 
-config STRIP_ASM_SYMS
-	bool "Strip assembler-generated symbols during link"
-	default n
-	help
-	  Strip internal assembler-generated symbols during a link (symbols
-	  that look like '.Lxxx') so they don't pollute the output of
-	  get_wchan() and suchlike.
-
 config HOTPLUG
 	bool "Support for hot-pluggable devices" if EMBEDDED
 	default y
@@ -998,6 +990,14 @@ config SLUB_DEBUG
 	  SLUB sysfs support. /sys/slab will not exist and there will be
 	  no support for cache validation etc.
 
+config STRIP_ASM_SYMS
+	bool "Strip assembler-generated symbols during link"
+	default n
+	help
+	  Strip internal assembler-generated symbols during a link (symbols
+	  that look like '.Lxxx') so they don't pollute the output of
+	  get_wchan() and suchlike.
+
 config COMPAT_BRK
 	bool "Disable heap randomization"
 	default y
diff --git a/init/do_mounts.c b/init/do_mounts.c
index dd7ee5f203f..093f6591550 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -231,7 +231,8 @@ static int __init do_mount_root(char *name, char *fs, int flags, void *data)
 
 void __init mount_block_root(char *name, int flags)
 {
-	char *fs_names = __getname();
+	char *fs_names = __getname_gfp(GFP_KERNEL
+		| __GFP_NOTRACK_FALSE_POSITIVE);
 	char *p;
 #ifdef CONFIG_BLOCK
 	char b[BDEVNAME_SIZE];
diff --git a/init/main.c b/init/main.c
index f6204f712e7..0e7aedeaa05 100644
--- a/init/main.c
+++ b/init/main.c
@@ -65,6 +65,7 @@
 #include <linux/idr.h>
 #include <linux/ftrace.h>
 #include <linux/async.h>
+#include <linux/kmemcheck.h>
 #include <linux/kmemtrace.h>
 #include <trace/boot.h>
 
@@ -546,6 +547,7 @@ static void __init mm_init(void)
 	page_cgroup_init_flatmem();
 	mem_init();
 	kmem_cache_init();
+	pgtable_cache_init();
 	vmalloc_init();
 }
 
@@ -670,7 +672,6 @@ asmlinkage void __init start_kernel(void)
 		initrd_start = 0;
 	}
 #endif
-	cpuset_init_early();
 	page_cgroup_init();
 	enable_debug_pagealloc();
 	cpu_hotplug_init();
@@ -684,7 +685,6 @@ asmlinkage void __init start_kernel(void)
 		late_time_init();
 	calibrate_delay();
 	pidmap_init();
-	pgtable_cache_init();
 	anon_vma_init();
 #ifdef CONFIG_X86
 	if (efi_enabled)
@@ -867,6 +867,11 @@ static noinline int init_post(void)
 static int __init kernel_init(void * unused)
 {
 	lock_kernel();
+
+	/*
+	 * init can allocate pages on any node
+	 */
+	set_mems_allowed(node_possible_map);
 	/*
 	 * init can run on any cpu.
 	 */
diff --git a/kernel/Makefile b/kernel/Makefile
index 90b53f6dc22..9df4501cb92 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -11,6 +11,7 @@ obj-y     = sched.o fork.o exec_domain.o panic.o printk.o \
 	    hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
 	    notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \
 	    async.o
+obj-y += groups.o
 
 ifdef CONFIG_FUNCTION_TRACER
 # Do not trace debug files and internal ftrace files
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index d5a7e17474e..7e75a41bd50 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -97,12 +97,6 @@ struct cpuset {
 
 	struct cpuset *parent;		/* my parent */
 
-	/*
-	 * Copy of global cpuset_mems_generation as of the most
-	 * recent time this cpuset changed its mems_allowed.
-	 */
-	int mems_generation;
-
 	struct fmeter fmeter;		/* memory_pressure filter */
 
 	/* partition number for rebuild_sched_domains() */
@@ -176,27 +170,6 @@ static inline int is_spread_slab(const struct cpuset *cs)
 	return test_bit(CS_SPREAD_SLAB, &cs->flags);
 }
 
-/*
- * Increment this integer everytime any cpuset changes its
- * mems_allowed value.  Users of cpusets can track this generation
- * number, and avoid having to lock and reload mems_allowed unless
- * the cpuset they're using changes generation.
- *
- * A single, global generation is needed because cpuset_attach_task() could
- * reattach a task to a different cpuset, which must not have its
- * generation numbers aliased with those of that tasks previous cpuset.
- *
- * Generations are needed for mems_allowed because one task cannot
- * modify another's memory placement.  So we must enable every task,
- * on every visit to __alloc_pages(), to efficiently check whether
- * its current->cpuset->mems_allowed has changed, requiring an update
- * of its current->mems_allowed.
- *
- * Since writes to cpuset_mems_generation are guarded by the cgroup lock
- * there is no need to mark it atomic.
- */
-static int cpuset_mems_generation;
-
 static struct cpuset top_cpuset = {
 	.flags = ((1 << CS_CPU_EXCLUSIVE) | (1 << CS_MEM_EXCLUSIVE)),
 };
@@ -228,8 +201,9 @@ static struct cpuset top_cpuset = {
  * If a task is only holding callback_mutex, then it has read-only
  * access to cpusets.
  *
- * The task_struct fields mems_allowed and mems_generation may only
- * be accessed in the context of that task, so require no locks.
+ * Now, the task_struct fields mems_allowed and mempolicy may be changed
+ * by other task, we use alloc_lock in the task_struct fields to protect
+ * them.
  *
  * The cpuset_common_file_read() handlers only hold callback_mutex across
  * small pieces of code, such as when reading out possibly multi-word
@@ -331,75 +305,22 @@ static void guarantee_online_mems(const struct cpuset *cs, nodemask_t *pmask)
 	BUG_ON(!nodes_intersects(*pmask, node_states[N_HIGH_MEMORY]));
 }
 
-/**
- * cpuset_update_task_memory_state - update task memory placement
- *
- * If the current tasks cpusets mems_allowed changed behind our
- * backs, update current->mems_allowed, mems_generation and task NUMA
- * mempolicy to the new value.
- *
- * Task mempolicy is updated by rebinding it relative to the
- * current->cpuset if a task has its memory placement changed.
- * Do not call this routine if in_interrupt().
- *
- * Call without callback_mutex or task_lock() held.  May be
- * called with or without cgroup_mutex held.  Thanks in part to
- * 'the_top_cpuset_hack', the task's cpuset pointer will never
- * be NULL.  This routine also might acquire callback_mutex during
- * call.
- *
- * Reading current->cpuset->mems_generation doesn't need task_lock
- * to guard the current->cpuset derefence, because it is guarded
- * from concurrent freeing of current->cpuset using RCU.
- *
- * The rcu_dereference() is technically probably not needed,
- * as I don't actually mind if I see a new cpuset pointer but
- * an old value of mems_generation.  However this really only
- * matters on alpha systems using cpusets heavily.  If I dropped
- * that rcu_dereference(), it would save them a memory barrier.
- * For all other arch's, rcu_dereference is a no-op anyway, and for
- * alpha systems not using cpusets, another planned optimization,
- * avoiding the rcu critical section for tasks in the root cpuset
- * which is statically allocated, so can't vanish, will make this
- * irrelevant.  Better to use RCU as intended, than to engage in
- * some cute trick to save a memory barrier that is impossible to
- * test, for alpha systems using cpusets heavily, which might not
- * even exist.
- *
- * This routine is needed to update the per-task mems_allowed data,
- * within the tasks context, when it is trying to allocate memory
- * (in various mm/mempolicy.c routines) and notices that some other
- * task has been modifying its cpuset.
+/*
+ * update task's spread flag if cpuset's page/slab spread flag is set
+ *
+ * Called with callback_mutex/cgroup_mutex held
  */
-
-void cpuset_update_task_memory_state(void)
+static void cpuset_update_task_spread_flag(struct cpuset *cs,
+					struct task_struct *tsk)
 {
-	int my_cpusets_mem_gen;
-	struct task_struct *tsk = current;
-	struct cpuset *cs;
-
-	rcu_read_lock();
-	my_cpusets_mem_gen = task_cs(tsk)->mems_generation;
-	rcu_read_unlock();
-
-	if (my_cpusets_mem_gen != tsk->cpuset_mems_generation) {
-		mutex_lock(&callback_mutex);
-		task_lock(tsk);
-		cs = task_cs(tsk); /* Maybe changed when task not locked */
-		guarantee_online_mems(cs, &tsk->mems_allowed);
-		tsk->cpuset_mems_generation = cs->mems_generation;
-		if (is_spread_page(cs))
-			tsk->flags |= PF_SPREAD_PAGE;
-		else
-			tsk->flags &= ~PF_SPREAD_PAGE;
-		if (is_spread_slab(cs))
-			tsk->flags |= PF_SPREAD_SLAB;
-		else
-			tsk->flags &= ~PF_SPREAD_SLAB;
-		task_unlock(tsk);
-		mutex_unlock(&callback_mutex);
-		mpol_rebind_task(tsk, &tsk->mems_allowed);
-	}
+	if (is_spread_page(cs))
+		tsk->flags |= PF_SPREAD_PAGE;
+	else
+		tsk->flags &= ~PF_SPREAD_PAGE;
+	if (is_spread_slab(cs))
+		tsk->flags |= PF_SPREAD_SLAB;
+	else
+		tsk->flags &= ~PF_SPREAD_SLAB;
 }
 
 /*
@@ -1007,14 +928,6 @@ static int update_cpumask(struct cpuset *cs, struct cpuset *trialcs,
  *    other task, the task_struct mems_allowed that we are hacking
  *    is for our current task, which must allocate new pages for that
  *    migrating memory region.
- *
- *    We call cpuset_update_task_memory_state() before hacking
- *    our tasks mems_allowed, so that we are assured of being in
- *    sync with our tasks cpuset, and in particular, callbacks to
- *    cpuset_update_task_memory_state() from nested page allocations
- *    won't see any mismatch of our cpuset and task mems_generation
- *    values, so won't overwrite our hacked tasks mems_allowed
- *    nodemask.
  */
 
 static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
@@ -1022,22 +935,37 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
 {
 	struct task_struct *tsk = current;
 
-	cpuset_update_task_memory_state();
-
-	mutex_lock(&callback_mutex);
 	tsk->mems_allowed = *to;
-	mutex_unlock(&callback_mutex);
 
 	do_migrate_pages(mm, from, to, MPOL_MF_MOVE_ALL);
 
-	mutex_lock(&callback_mutex);
 	guarantee_online_mems(task_cs(tsk),&tsk->mems_allowed);
-	mutex_unlock(&callback_mutex);
 }
 
 /*
- * Rebind task's vmas to cpuset's new mems_allowed, and migrate pages to new
- * nodes if memory_migrate flag is set. Called with cgroup_mutex held.
+ * cpuset_change_task_nodemask - change task's mems_allowed and mempolicy
+ * @tsk: the task to change
+ * @newmems: new nodes that the task will be set
+ *
+ * In order to avoid seeing no nodes if the old and new nodes are disjoint,
+ * we structure updates as setting all new allowed nodes, then clearing newly
+ * disallowed ones.
+ *
+ * Called with task's alloc_lock held
+ */
+static void cpuset_change_task_nodemask(struct task_struct *tsk,
+					nodemask_t *newmems)
+{
+	nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems);
+	mpol_rebind_task(tsk, &tsk->mems_allowed);
+	mpol_rebind_task(tsk, newmems);
+	tsk->mems_allowed = *newmems;
+}
+
+/*
+ * Update task's mems_allowed and rebind its mempolicy and vmas' mempolicy
+ * of it to cpuset's new mems_allowed, and migrate pages to new nodes if
+ * memory_migrate flag is set. Called with cgroup_mutex held.
  */
 static void cpuset_change_nodemask(struct task_struct *p,
 				   struct cgroup_scanner *scan)
@@ -1046,12 +974,19 @@ static void cpuset_change_nodemask(struct task_struct *p,
 	struct cpuset *cs;
 	int migrate;
 	const nodemask_t *oldmem = scan->data;
+	nodemask_t newmems;
+
+	cs = cgroup_cs(scan->cg);
+	guarantee_online_mems(cs, &newmems);
+
+	task_lock(p);
+	cpuset_change_task_nodemask(p, &newmems);
+	task_unlock(p);
 
 	mm = get_task_mm(p);
 	if (!mm)
 		return;
 
-	cs = cgroup_cs(scan->cg);
 	migrate = is_memory_migrate(cs);
 
 	mpol_rebind_mm(mm, &cs->mems_allowed);
@@ -1104,10 +1039,10 @@ static void update_tasks_nodemask(struct cpuset *cs, const nodemask_t *oldmem,
 /*
  * Handle user request to change the 'mems' memory placement
  * of a cpuset.  Needs to validate the request, update the
- * cpusets mems_allowed and mems_generation, and for each
- * task in the cpuset, rebind any vma mempolicies and if
- * the cpuset is marked 'memory_migrate', migrate the tasks
- * pages to the new memory.
+ * cpusets mems_allowed, and for each task in the cpuset,
+ * update mems_allowed and rebind task's mempolicy and any vma
+ * mempolicies and if the cpuset is marked 'memory_migrate',
+ * migrate the tasks pages to the new memory.
  *
  * Call with cgroup_mutex held.  May take callback_mutex during call.
  * Will take tasklist_lock, scan tasklist for tasks in cpuset cs,
@@ -1160,7 +1095,6 @@ static int update_nodemask(struct cpuset *cs, struct cpuset *trialcs,
 
 	mutex_lock(&callback_mutex);
 	cs->mems_allowed = trialcs->mems_allowed;
-	cs->mems_generation = cpuset_mems_generation++;
 	mutex_unlock(&callback_mutex);
 
 	update_tasks_nodemask(cs, &oldmem, &heap);
@@ -1193,6 +1127,46 @@ static int update_relax_domain_level(struct cpuset *cs, s64 val)
 }
 
 /*
+ * cpuset_change_flag - make a task's spread flags the same as its cpuset's
+ * @tsk: task to be updated
+ * @scan: struct cgroup_scanner containing the cgroup of the task
+ *
+ * Called by cgroup_scan_tasks() for each task in a cgroup.
+ *
+ * We don't need to re-check for the cgroup/cpuset membership, since we're
+ * holding cgroup_lock() at this point.
+ */
+static void cpuset_change_flag(struct task_struct *tsk,
+				struct cgroup_scanner *scan)
+{
+	cpuset_update_task_spread_flag(cgroup_cs(scan->cg), tsk);
+}
+
+/*
+ * update_tasks_flags - update the spread flags of tasks in the cpuset.
+ * @cs: the cpuset in which each task's spread flags needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
+ *
+ * Called with cgroup_mutex held
+ *
+ * The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
+ * calling callback functions for each.
+ *
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
+ */
+static void update_tasks_flags(struct cpuset *cs, struct ptr_heap *heap)
+{
+	struct cgroup_scanner scan;
+
+	scan.cg = cs->css.cgroup;
+	scan.test_task = NULL;
+	scan.process_task = cpuset_change_flag;
+	scan.heap = heap;
+	cgroup_scan_tasks(&scan);
+}
+
+/*
  * update_flag - read a 0 or a 1 in a file and update associated flag
  * bit:		the bit to update (see cpuset_flagbits_t)
  * cs:		the cpuset to update
@@ -1205,8 +1179,10 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs,
 		       int turning_on)
 {
 	struct cpuset *trialcs;
-	int err;
 	int balance_flag_changed;
+	int spread_flag_changed;
+	struct ptr_heap heap;
+	int err;
 
 	trialcs = alloc_trial_cpuset(cs);
 	if (!trialcs)
@@ -1221,9 +1197,16 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs,
 	if (err < 0)
 		goto out;
 
+	err = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+	if (err < 0)
+		goto out;
+
 	balance_flag_changed = (is_sched_load_balance(cs) !=
 				is_sched_load_balance(trialcs));
 
+	spread_flag_changed = ((is_spread_slab(cs) != is_spread_slab(trialcs))
+			|| (is_spread_page(cs) != is_spread_page(trialcs)));
+
 	mutex_lock(&callback_mutex);
 	cs->flags = trialcs->flags;
 	mutex_unlock(&callback_mutex);
@@ -1231,6 +1214,9 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs,
 	if (!cpumask_empty(trialcs->cpus_allowed) && balance_flag_changed)
 		async_rebuild_sched_domains();
 
+	if (spread_flag_changed)
+		update_tasks_flags(cs, &heap);
+	heap_free(&heap);
 out:
 	free_trial_cpuset(trialcs);
 	return err;
@@ -1372,15 +1358,20 @@ static void cpuset_attach(struct cgroup_subsys *ss,
 
 	if (cs == &top_cpuset) {
 		cpumask_copy(cpus_attach, cpu_possible_mask);
+		to = node_possible_map;
 	} else {
-		mutex_lock(&callback_mutex);
 		guarantee_online_cpus(cs, cpus_attach);
-		mutex_unlock(&callback_mutex);
+		guarantee_online_mems(cs, &to);
 	}
 	err = set_cpus_allowed_ptr(tsk, cpus_attach);
 	if (err)
 		return;
 
+	task_lock(tsk);
+	cpuset_change_task_nodemask(tsk, &to);
+	task_unlock(tsk);
+	cpuset_update_task_spread_flag(cs, tsk);
+
 	from = oldcs->mems_allowed;
 	to = cs->mems_allowed;
 	mm = get_task_mm(tsk);
@@ -1442,11 +1433,9 @@ static int cpuset_write_u64(struct cgroup *cgrp, struct cftype *cft, u64 val)
 		break;
 	case FILE_SPREAD_PAGE:
 		retval = update_flag(CS_SPREAD_PAGE, cs, val);
-		cs->mems_generation = cpuset_mems_generation++;
 		break;
 	case FILE_SPREAD_SLAB:
 		retval = update_flag(CS_SPREAD_SLAB, cs, val);
-		cs->mems_generation = cpuset_mems_generation++;
 		break;
 	default:
 		retval = -EINVAL;
@@ -1786,8 +1775,6 @@ static struct cgroup_subsys_state *cpuset_create(
 	struct cpuset *parent;
 
 	if (!cont->parent) {
-		/* This is early initialization for the top cgroup */
-		top_cpuset.mems_generation = cpuset_mems_generation++;
 		return &top_cpuset.css;
 	}
 	parent = cgroup_cs(cont->parent);
@@ -1799,7 +1786,6 @@ static struct cgroup_subsys_state *cpuset_create(
 		return ERR_PTR(-ENOMEM);
 	}
 
-	cpuset_update_task_memory_state();
 	cs->flags = 0;
 	if (is_spread_page(parent))
 		set_bit(CS_SPREAD_PAGE, &cs->flags);
@@ -1808,7 +1794,6 @@ static struct cgroup_subsys_state *cpuset_create(
 	set_bit(CS_SCHED_LOAD_BALANCE, &cs->flags);
 	cpumask_clear(cs->cpus_allowed);
 	nodes_clear(cs->mems_allowed);
-	cs->mems_generation = cpuset_mems_generation++;
 	fmeter_init(&cs->fmeter);
 	cs->relax_domain_level = -1;
 
@@ -1827,8 +1812,6 @@ static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
 {
 	struct cpuset *cs = cgroup_cs(cont);
 
-	cpuset_update_task_memory_state();
-
 	if (is_sched_load_balance(cs))
 		update_flag(CS_SCHED_LOAD_BALANCE, cs, 0);
 
@@ -1849,21 +1832,6 @@ struct cgroup_subsys cpuset_subsys = {
 	.early_init = 1,
 };
 
-/*
- * cpuset_init_early - just enough so that the calls to
- * cpuset_update_task_memory_state() in early init code
- * are harmless.
- */
-
-int __init cpuset_init_early(void)
-{
-	alloc_cpumask_var(&top_cpuset.cpus_allowed, GFP_NOWAIT);
-
-	top_cpuset.mems_generation = cpuset_mems_generation++;
-	return 0;
-}
-
-
 /**
  * cpuset_init - initialize cpusets at system boot
  *
@@ -1874,11 +1842,13 @@ int __init cpuset_init(void)
 {
 	int err = 0;
 
+	if (!alloc_cpumask_var(&top_cpuset.cpus_allowed, GFP_KERNEL))
+		BUG();
+
 	cpumask_setall(top_cpuset.cpus_allowed);
 	nodes_setall(top_cpuset.mems_allowed);
 
 	fmeter_init(&top_cpuset.fmeter);
-	top_cpuset.mems_generation = cpuset_mems_generation++;
 	set_bit(CS_SCHED_LOAD_BALANCE, &top_cpuset.flags);
 	top_cpuset.relax_domain_level = -1;
 
diff --git a/kernel/fork.c b/kernel/fork.c
index 4430eb1376f..be022c200da 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -178,7 +178,7 @@ void __init fork_init(unsigned long mempages)
 	/* create a slab on which task_structs can be allocated */
 	task_struct_cachep =
 		kmem_cache_create("task_struct", sizeof(struct task_struct),
-			ARCH_MIN_TASKALIGN, SLAB_PANIC, NULL);
+			ARCH_MIN_TASKALIGN, SLAB_PANIC | SLAB_NOTRACK, NULL);
 #endif
 
 	/* do the arch specific task caches init */
@@ -1470,20 +1470,20 @@ void __init proc_caches_init(void)
 {
 	sighand_cachep = kmem_cache_create("sighand_cache",
 			sizeof(struct sighand_struct), 0,
-			SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_DESTROY_BY_RCU,
-			sighand_ctor);
+			SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_DESTROY_BY_RCU|
+			SLAB_NOTRACK, sighand_ctor);
 	signal_cachep = kmem_cache_create("signal_cache",
 			sizeof(struct signal_struct), 0,
-			SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+			SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL);
 	files_cachep = kmem_cache_create("files_cache",
 			sizeof(struct files_struct), 0,
-			SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+			SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL);
 	fs_cachep = kmem_cache_create("fs_cache",
 			sizeof(struct fs_struct), 0,
-			SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+			SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL);
 	mm_cachep = kmem_cache_create("mm_struct",
 			sizeof(struct mm_struct), ARCH_MIN_MMSTRUCT_ALIGN,
-			SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+			SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL);
 	vm_area_cachep = KMEM_CACHE(vm_area_struct, SLAB_PANIC);
 	mmap_init();
 }
diff --git a/kernel/groups.c b/kernel/groups.c
new file mode 100644
index 00000000000..2b45b2ee396
--- /dev/null
+++ b/kernel/groups.c
@@ -0,0 +1,288 @@
+/*
+ * Supplementary group IDs
+ */
+#include <linux/cred.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/security.h>
+#include <linux/syscalls.h>
+#include <asm/uaccess.h>
+
+/* init to 2 - one for init_task, one to ensure it is never freed */
+struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
+
+struct group_info *groups_alloc(int gidsetsize)
+{
+	struct group_info *group_info;
+	int nblocks;
+	int i;
+
+	nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
+	/* Make sure we always allocate at least one indirect block pointer */
+	nblocks = nblocks ? : 1;
+	group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
+	if (!group_info)
+		return NULL;
+	group_info->ngroups = gidsetsize;
+	group_info->nblocks = nblocks;
+	atomic_set(&group_info->usage, 1);
+
+	if (gidsetsize <= NGROUPS_SMALL)
+		group_info->blocks[0] = group_info->small_block;
+	else {
+		for (i = 0; i < nblocks; i++) {
+			gid_t *b;
+			b = (void *)__get_free_page(GFP_USER);
+			if (!b)
+				goto out_undo_partial_alloc;
+			group_info->blocks[i] = b;
+		}
+	}
+	return group_info;
+
+out_undo_partial_alloc:
+	while (--i >= 0) {
+		free_page((unsigned long)group_info->blocks[i]);
+	}
+	kfree(group_info);
+	return NULL;
+}
+
+EXPORT_SYMBOL(groups_alloc);
+
+void groups_free(struct group_info *group_info)
+{
+	if (group_info->blocks[0] != group_info->small_block) {
+		int i;
+		for (i = 0; i < group_info->nblocks; i++)
+			free_page((unsigned long)group_info->blocks[i]);
+	}
+	kfree(group_info);
+}
+
+EXPORT_SYMBOL(groups_free);
+
+/* export the group_info to a user-space array */
+static int groups_to_user(gid_t __user *grouplist,
+			  const struct group_info *group_info)
+{
+	int i;
+	unsigned int count = group_info->ngroups;
+
+	for (i = 0; i < group_info->nblocks; i++) {
+		unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
+		unsigned int len = cp_count * sizeof(*grouplist);
+
+		if (copy_to_user(grouplist, group_info->blocks[i], len))
+			return -EFAULT;
+
+		grouplist += NGROUPS_PER_BLOCK;
+		count -= cp_count;
+	}
+	return 0;
+}
+
+/* fill a group_info from a user-space array - it must be allocated already */
+static int groups_from_user(struct group_info *group_info,
+    gid_t __user *grouplist)
+{
+	int i;
+	unsigned int count = group_info->ngroups;
+
+	for (i = 0; i < group_info->nblocks; i++) {
+		unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
+		unsigned int len = cp_count * sizeof(*grouplist);
+
+		if (copy_from_user(group_info->blocks[i], grouplist, len))
+			return -EFAULT;
+
+		grouplist += NGROUPS_PER_BLOCK;
+		count -= cp_count;
+	}
+	return 0;
+}
+
+/* a simple Shell sort */
+static void groups_sort(struct group_info *group_info)
+{
+	int base, max, stride;
+	int gidsetsize = group_info->ngroups;
+
+	for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
+		; /* nothing */
+	stride /= 3;
+
+	while (stride) {
+		max = gidsetsize - stride;
+		for (base = 0; base < max; base++) {
+			int left = base;
+			int right = left + stride;
+			gid_t tmp = GROUP_AT(group_info, right);
+
+			while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
+				GROUP_AT(group_info, right) =
+				    GROUP_AT(group_info, left);
+				right = left;
+				left -= stride;
+			}
+			GROUP_AT(group_info, right) = tmp;
+		}
+		stride /= 3;
+	}
+}
+
+/* a simple bsearch */
+int groups_search(const struct group_info *group_info, gid_t grp)
+{
+	unsigned int left, right;
+
+	if (!group_info)
+		return 0;
+
+	left = 0;
+	right = group_info->ngroups;
+	while (left < right) {
+		unsigned int mid = (left+right)/2;
+		int cmp = grp - GROUP_AT(group_info, mid);
+		if (cmp > 0)
+			left = mid + 1;
+		else if (cmp < 0)
+			right = mid;
+		else
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * set_groups - Change a group subscription in a set of credentials
+ * @new: The newly prepared set of credentials to alter
+ * @group_info: The group list to install
+ *
+ * Validate a group subscription and, if valid, insert it into a set
+ * of credentials.
+ */
+int set_groups(struct cred *new, struct group_info *group_info)
+{
+	int retval;
+
+	retval = security_task_setgroups(group_info);
+	if (retval)
+		return retval;
+
+	put_group_info(new->group_info);
+	groups_sort(group_info);
+	get_group_info(group_info);
+	new->group_info = group_info;
+	return 0;
+}
+
+EXPORT_SYMBOL(set_groups);
+
+/**
+ * set_current_groups - Change current's group subscription
+ * @group_info: The group list to impose
+ *
+ * Validate a group subscription and, if valid, impose it upon current's task
+ * security record.
+ */
+int set_current_groups(struct group_info *group_info)
+{
+	struct cred *new;
+	int ret;
+
+	new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	ret = set_groups(new, group_info);
+	if (ret < 0) {
+		abort_creds(new);
+		return ret;
+	}
+
+	return commit_creds(new);
+}
+
+EXPORT_SYMBOL(set_current_groups);
+
+SYSCALL_DEFINE2(getgroups, int, gidsetsize, gid_t __user *, grouplist)
+{
+	const struct cred *cred = current_cred();
+	int i;
+
+	if (gidsetsize < 0)
+		return -EINVAL;
+
+	/* no need to grab task_lock here; it cannot change */
+	i = cred->group_info->ngroups;
+	if (gidsetsize) {
+		if (i > gidsetsize) {
+			i = -EINVAL;
+			goto out;
+		}
+		if (groups_to_user(grouplist, cred->group_info)) {
+			i = -EFAULT;
+			goto out;
+		}
+	}
+out:
+	return i;
+}
+
+/*
+ *	SMP: Our groups are copy-on-write. We can set them safely
+ *	without another task interfering.
+ */
+
+SYSCALL_DEFINE2(setgroups, int, gidsetsize, gid_t __user *, grouplist)
+{
+	struct group_info *group_info;
+	int retval;
+
+	if (!capable(CAP_SETGID))
+		return -EPERM;
+	if ((unsigned)gidsetsize > NGROUPS_MAX)
+		return -EINVAL;
+
+	group_info = groups_alloc(gidsetsize);
+	if (!group_info)
+		return -ENOMEM;
+	retval = groups_from_user(group_info, grouplist);
+	if (retval) {
+		put_group_info(group_info);
+		return retval;
+	}
+
+	retval = set_current_groups(group_info);
+	put_group_info(group_info);
+
+	return retval;
+}
+
+/*
+ * Check whether we're fsgid/egid or in the supplemental group..
+ */
+int in_group_p(gid_t grp)
+{
+	const struct cred *cred = current_cred();
+	int retval = 1;
+
+	if (grp != cred->fsgid)
+		retval = groups_search(cred->group_info, grp);
+	return retval;
+}
+
+EXPORT_SYMBOL(in_group_p);
+
+int in_egroup_p(gid_t grp)
+{
+	const struct cred *cred = current_cred();
+	int retval = 1;
+
+	if (grp != cred->egid)
+		retval = groups_search(cred->group_info, grp);
+	return retval;
+}
+
+EXPORT_SYMBOL(in_egroup_p);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index cb8a15c1958..b675a67c9ac 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -43,6 +43,8 @@
 #include <linux/seq_file.h>
 #include <linux/err.h>
 #include <linux/debugobjects.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
 
 #include <asm/uaccess.h>
 
@@ -193,12 +195,24 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
  * Switch the timer base to the current CPU when possible.
  */
 static inline struct hrtimer_clock_base *
-switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base)
+switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
+		    int pinned)
 {
 	struct hrtimer_clock_base *new_base;
 	struct hrtimer_cpu_base *new_cpu_base;
+	int cpu, preferred_cpu = -1;
+
+	cpu = smp_processor_id();
+#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
+	if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
+		preferred_cpu = get_nohz_load_balancer();
+		if (preferred_cpu >= 0)
+			cpu = preferred_cpu;
+	}
+#endif
 
-	new_cpu_base = &__get_cpu_var(hrtimer_bases);
+again:
+	new_cpu_base = &per_cpu(hrtimer_bases, cpu);
 	new_base = &new_cpu_base->clock_base[base->index];
 
 	if (base != new_base) {
@@ -218,6 +232,40 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base)
 		timer->base = NULL;
 		spin_unlock(&base->cpu_base->lock);
 		spin_lock(&new_base->cpu_base->lock);
+
+		/* Optimized away for NOHZ=n SMP=n */
+		if (cpu == preferred_cpu) {
+			/* Calculate clock monotonic expiry time */
+#ifdef CONFIG_HIGH_RES_TIMERS
+			ktime_t expires = ktime_sub(hrtimer_get_expires(timer),
+							new_base->offset);
+#else
+			ktime_t expires = hrtimer_get_expires(timer);
+#endif
+
+			/*
+			 * Get the next event on target cpu from the
+			 * clock events layer.
+			 * This covers the highres=off nohz=on case as well.
+			 */
+			ktime_t next = clockevents_get_next_event(cpu);
+
+			ktime_t delta = ktime_sub(expires, next);
+
+			/*
+			 * We do not migrate the timer when it is expiring
+			 * before the next event on the target cpu because
+			 * we cannot reprogram the target cpu hardware and
+			 * we would cause it to fire late.
+			 */
+			if (delta.tv64 < 0) {
+				cpu = smp_processor_id();
+				spin_unlock(&new_base->cpu_base->lock);
+				spin_lock(&base->cpu_base->lock);
+				timer->base = base;
+				goto again;
+			}
+		}
 		timer->base = new_base;
 	}
 	return new_base;
@@ -235,7 +283,7 @@ lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
 	return base;
 }
 
-# define switch_hrtimer_base(t, b)	(b)
+# define switch_hrtimer_base(t, b, p)	(b)
 
 #endif	/* !CONFIG_SMP */
 
@@ -907,9 +955,9 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
 	ret = remove_hrtimer(timer, base);
 
 	/* Switch the timer base, if necessary: */
-	new_base = switch_hrtimer_base(timer, base);
+	new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
 
-	if (mode == HRTIMER_MODE_REL) {
+	if (mode & HRTIMER_MODE_REL) {
 		tim = ktime_add_safe(tim, new_base->get_time());
 		/*
 		 * CONFIG_TIME_LOW_RES is a temporary way for architectures
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 374faf9bfdc..3a29dbe7898 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -30,12 +30,16 @@
 #define all_var 0
 #endif
 
-/* These will be re-linked against their real values during the second link stage */
+/*
+ * These will be re-linked against their real values
+ * during the second link stage.
+ */
 extern const unsigned long kallsyms_addresses[] __attribute__((weak));
 extern const u8 kallsyms_names[] __attribute__((weak));
 
-/* tell the compiler that the count isn't in the small data section if the arch
- * has one (eg: FRV)
+/*
+ * Tell the compiler that the count isn't in the small data section if the arch
+ * has one (eg: FRV).
  */
 extern const unsigned long kallsyms_num_syms
 __attribute__((weak, section(".rodata")));
@@ -75,31 +79,37 @@ static int is_ksym_addr(unsigned long addr)
 	return is_kernel_text(addr) || is_kernel_inittext(addr);
 }
 
-/* expand a compressed symbol data into the resulting uncompressed string,
-   given the offset to where the symbol is in the compressed stream */
+/*
+ * Expand a compressed symbol data into the resulting uncompressed string,
+ * given the offset to where the symbol is in the compressed stream.
+ */
 static unsigned int kallsyms_expand_symbol(unsigned int off, char *result)
 {
 	int len, skipped_first = 0;
 	const u8 *tptr, *data;
 
-	/* get the compressed symbol length from the first symbol byte */
+	/* Get the compressed symbol length from the first symbol byte. */
 	data = &kallsyms_names[off];
 	len = *data;
 	data++;
 
-	/* update the offset to return the offset for the next symbol on
-	 * the compressed stream */
+	/*
+	 * Update the offset to return the offset for the next symbol on
+	 * the compressed stream.
+	 */
 	off += len + 1;
 
-	/* for every byte on the compressed symbol data, copy the table
-	   entry for that byte */
-	while(len) {
-		tptr = &kallsyms_token_table[ kallsyms_token_index[*data] ];
+	/*
+	 * For every byte on the compressed symbol data, copy the table
+	 * entry for that byte.
+	 */
+	while (len) {
+		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
 		data++;
 		len--;
 
 		while (*tptr) {
-			if(skipped_first) {
+			if (skipped_first) {
 				*result = *tptr;
 				result++;
 			} else
@@ -110,36 +120,46 @@ static unsigned int kallsyms_expand_symbol(unsigned int off, char *result)
 
 	*result = '\0';
 
-	/* return to offset to the next symbol */
+	/* Return to offset to the next symbol. */
 	return off;
 }
 
-/* get symbol type information. This is encoded as a single char at the
- * begining of the symbol name */
+/*
+ * Get symbol type information. This is encoded as a single char at the
+ * beginning of the symbol name.
+ */
 static char kallsyms_get_symbol_type(unsigned int off)
 {
-	/* get just the first code, look it up in the token table, and return the
-	 * first char from this token */
-	return kallsyms_token_table[ kallsyms_token_index[ kallsyms_names[off+1] ] ];
+	/*
+	 * Get just the first code, look it up in the token table,
+	 * and return the first char from this token.
+	 */
+	return kallsyms_token_table[kallsyms_token_index[kallsyms_names[off + 1]]];
 }
 
 
-/* find the offset on the compressed stream given and index in the
- * kallsyms array */
+/*
+ * Find the offset on the compressed stream given and index in the
+ * kallsyms array.
+ */
 static unsigned int get_symbol_offset(unsigned long pos)
 {
 	const u8 *name;
 	int i;
 
-	/* use the closest marker we have. We have markers every 256 positions,
-	 * so that should be close enough */
-	name = &kallsyms_names[ kallsyms_markers[pos>>8] ];
+	/*
+	 * Use the closest marker we have. We have markers every 256 positions,
+	 * so that should be close enough.
+	 */
+	name = &kallsyms_names[kallsyms_markers[pos >> 8]];
 
-	/* sequentially scan all the symbols up to the point we're searching for.
-	 * Every symbol is stored in a [<len>][<len> bytes of data] format, so we
-	 * just need to add the len to the current pointer for every symbol we
-	 * wish to skip */
-	for(i = 0; i < (pos&0xFF); i++)
+	/*
+	 * Sequentially scan all the symbols up to the point we're searching
+	 * for. Every symbol is stored in a [<len>][<len> bytes of data] format,
+	 * so we just need to add the len to the current pointer for every
+	 * symbol we wish to skip.
+	 */
+	for (i = 0; i < (pos & 0xFF); i++)
 		name = name + (*name) + 1;
 
 	return name - kallsyms_names;
@@ -190,7 +210,7 @@ static unsigned long get_symbol_pos(unsigned long addr,
 	/* This kernel should never had been booted. */
 	BUG_ON(!kallsyms_addresses);
 
-	/* do a binary search on the sorted kallsyms_addresses array */
+	/* Do a binary search on the sorted kallsyms_addresses array. */
 	low = 0;
 	high = kallsyms_num_syms;
 
@@ -203,15 +223,15 @@ static unsigned long get_symbol_pos(unsigned long addr,
 	}
 
 	/*
-	 * search for the first aliased symbol. Aliased
-	 * symbols are symbols with the same address
+	 * Search for the first aliased symbol. Aliased
+	 * symbols are symbols with the same address.
 	 */
 	while (low && kallsyms_addresses[low-1] == kallsyms_addresses[low])
 		--low;
 
 	symbol_start = kallsyms_addresses[low];
 
-	/* Search for next non-aliased symbol */
+	/* Search for next non-aliased symbol. */
 	for (i = low + 1; i < kallsyms_num_syms; i++) {
 		if (kallsyms_addresses[i] > symbol_start) {
 			symbol_end = kallsyms_addresses[i];
@@ -219,7 +239,7 @@ static unsigned long get_symbol_pos(unsigned long addr,
 		}
 	}
 
-	/* if we found no next symbol, we use the end of the section */
+	/* If we found no next symbol, we use the end of the section. */
 	if (!symbol_end) {
 		if (is_kernel_inittext(addr))
 			symbol_end = (unsigned long)_einittext;
@@ -252,10 +272,10 @@ int kallsyms_lookup_size_offset(unsigned long addr, unsigned long *symbolsize,
 
 /*
  * Lookup an address
- * - modname is set to NULL if it's in the kernel
- * - we guarantee that the returned name is valid until we reschedule even if
- *   it resides in a module
- * - we also guarantee that modname will be valid until rescheduled
+ * - modname is set to NULL if it's in the kernel.
+ * - We guarantee that the returned name is valid until we reschedule even if.
+ *   It resides in a module.
+ * - We also guarantee that modname will be valid until rescheduled.
  */
 const char *kallsyms_lookup(unsigned long addr,
 			    unsigned long *symbolsize,
@@ -276,7 +296,7 @@ const char *kallsyms_lookup(unsigned long addr,
 		return namebuf;
 	}
 
-	/* see if it's in a module */
+	/* See if it's in a module. */
 	return module_address_lookup(addr, symbolsize, offset, modname,
 				     namebuf);
 }
@@ -294,7 +314,7 @@ int lookup_symbol_name(unsigned long addr, char *symname)
 		kallsyms_expand_symbol(get_symbol_offset(pos), symname);
 		return 0;
 	}
-	/* see if it's in a module */
+	/* See if it's in a module. */
 	return lookup_module_symbol_name(addr, symname);
 }
 
@@ -313,7 +333,7 @@ int lookup_symbol_attrs(unsigned long addr, unsigned long *size,
 		modname[0] = '\0';
 		return 0;
 	}
-	/* see if it's in a module */
+	/* See if it's in a module. */
 	return lookup_module_symbol_attrs(addr, size, offset, modname, name);
 }
 
@@ -342,6 +362,7 @@ int sprint_symbol(char *buffer, unsigned long address)
 
 	return len;
 }
+EXPORT_SYMBOL_GPL(sprint_symbol);
 
 /* Look up a kernel symbol and print it to the kernel messages. */
 void __print_symbol(const char *fmt, unsigned long address)
@@ -352,13 +373,13 @@ void __print_symbol(const char *fmt, unsigned long address)
 
 	printk(fmt, buffer);
 }
+EXPORT_SYMBOL(__print_symbol);
 
 /* To avoid using get_symbol_offset for every symbol, we carry prefix along. */
-struct kallsym_iter
-{
+struct kallsym_iter {
 	loff_t pos;
 	unsigned long value;
-	unsigned int nameoff; /* If iterating in core kernel symbols */
+	unsigned int nameoff; /* If iterating in core kernel symbols. */
 	char type;
 	char name[KSYM_NAME_LEN];
 	char module_name[MODULE_NAME_LEN];
@@ -404,7 +425,7 @@ static int update_iter(struct kallsym_iter *iter, loff_t pos)
 		iter->pos = pos;
 		return get_ksymbol_mod(iter);
 	}
-	
+
 	/* If we're not on the desired position, reset to new position. */
 	if (pos != iter->pos)
 		reset_iter(iter, pos);
@@ -439,23 +460,25 @@ static int s_show(struct seq_file *m, void *p)
 {
 	struct kallsym_iter *iter = m->private;
 
-	/* Some debugging symbols have no name.  Ignore them. */ 
+	/* Some debugging symbols have no name.  Ignore them. */
 	if (!iter->name[0])
 		return 0;
 
 	if (iter->module_name[0]) {
 		char type;
 
-		/* Label it "global" if it is exported,
-		 * "local" if not exported. */
+		/*
+		 * Label it "global" if it is exported,
+		 * "local" if not exported.
+		 */
 		type = iter->exported ? toupper(iter->type) :
 					tolower(iter->type);
 		seq_printf(m, "%0*lx %c %s\t[%s]\n",
-			   (int)(2*sizeof(void*)),
+			   (int)(2 * sizeof(void *)),
 			   iter->value, type, iter->name, iter->module_name);
 	} else
 		seq_printf(m, "%0*lx %c %s\n",
-			   (int)(2*sizeof(void*)),
+			   (int)(2 * sizeof(void *)),
 			   iter->value, iter->type, iter->name);
 	return 0;
 }
@@ -469,9 +492,11 @@ static const struct seq_operations kallsyms_op = {
 
 static int kallsyms_open(struct inode *inode, struct file *file)
 {
-	/* We keep iterator in m->private, since normal case is to
+	/*
+	 * We keep iterator in m->private, since normal case is to
 	 * s_start from where we left off, so we avoid doing
-	 * using get_symbol_offset for every symbol */
+	 * using get_symbol_offset for every symbol.
+	 */
 	struct kallsym_iter *iter;
 	int ret;
 
@@ -500,7 +525,4 @@ static int __init kallsyms_init(void)
 	proc_create("kallsyms", 0444, NULL, &kallsyms_operations);
 	return 0;
 }
-__initcall(kallsyms_init);
-
-EXPORT_SYMBOL(__print_symbol);
-EXPORT_SYMBOL_GPL(sprint_symbol);
+device_initcall(kallsyms_init);
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index bc41ad0f24f..26539e3228e 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -72,9 +72,9 @@ struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask, spinlock_t *lock)
 
 	/*
 	 * round up to the next power of 2, since our 'let the indices
-	 * wrap' tachnique works only in this case.
+	 * wrap' technique works only in this case.
 	 */
-	if (size & (size - 1)) {
+	if (!is_power_of_2(size)) {
 		BUG_ON(size > 0x80000000);
 		size = roundup_pow_of_two(size);
 	}
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 41c88fe4050..7fa44133352 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -9,6 +9,7 @@
 #include <linux/kthread.h>
 #include <linux/completion.h>
 #include <linux/err.h>
+#include <linux/cpuset.h>
 #include <linux/unistd.h>
 #include <linux/file.h>
 #include <linux/module.h>
@@ -236,6 +237,7 @@ int kthreadd(void *unused)
 	ignore_signals(tsk);
 	set_user_nice(tsk, KTHREAD_NICE_LEVEL);
 	set_cpus_allowed_ptr(tsk, cpu_all_mask);
+	set_mems_allowed(node_possible_map);
 
 	current->flags |= PF_NOFREEZE | PF_FREEZER_NOSIG;
 
diff --git a/kernel/module.c b/kernel/module.c
index e4ab36ce767..215aaab09e9 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2899,7 +2899,7 @@ void print_modules(void)
 	struct module *mod;
 	char buf[8];
 
-	printk("Modules linked in:");
+	printk(KERN_DEFAULT "Modules linked in:");
 	/* Most callers should already have preempt disabled, but make sure */
 	preempt_disable();
 	list_for_each_entry_rcu(mod, &modules, list)
diff --git a/kernel/power/poweroff.c b/kernel/power/poweroff.c
index 97890831e1b..e8b33700627 100644
--- a/kernel/power/poweroff.c
+++ b/kernel/power/poweroff.c
@@ -34,7 +34,7 @@ static struct sysrq_key_op	sysrq_poweroff_op = {
 	.handler        = handle_poweroff,
 	.help_msg       = "powerOff",
 	.action_msg     = "Power Off",
- 	.enable_mask	= SYSRQ_ENABLE_BOOT,
+	.enable_mask	= SYSRQ_ENABLE_BOOT,
 };
 
 static int pm_sysrq_init(void)
diff --git a/kernel/power/process.c b/kernel/power/process.c
index ca634019497..da2072d7381 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -117,9 +117,12 @@ int freeze_processes(void)
 	if (error)
 		goto Exit;
 	printk("done.");
+
+	oom_killer_disable();
  Exit:
 	BUG_ON(in_atomic());
 	printk("\n");
+
 	return error;
 }
 
@@ -145,6 +148,8 @@ static void thaw_tasks(bool nosig_only)
 
 void thaw_processes(void)
 {
+	oom_killer_enable();
+
 	printk("Restarting tasks ... ");
 	thaw_tasks(true);
 	thaw_tasks(false);
diff --git a/kernel/printk.c b/kernel/printk.c
index 5052b5497c6..b4d97b54c1e 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -687,20 +687,35 @@ asmlinkage int vprintk(const char *fmt, va_list args)
 				  sizeof(printk_buf) - printed_len, fmt, args);
 
 
+	p = printk_buf;
+
+	/* Do we have a loglevel in the string? */
+	if (p[0] == '<') {
+		unsigned char c = p[1];
+		if (c && p[2] == '>') {
+			switch (c) {
+			case '0' ... '7': /* loglevel */
+				current_log_level = c - '0';
+			/* Fallthrough - make sure we're on a new line */
+			case 'd': /* KERN_DEFAULT */
+				if (!new_text_line) {
+					emit_log_char('\n');
+					new_text_line = 1;
+				}
+			/* Fallthrough - skip the loglevel */
+			case 'c': /* KERN_CONT */
+				p += 3;
+				break;
+			}
+		}
+	}
+
 	/*
 	 * Copy the output into log_buf.  If the caller didn't provide
 	 * appropriate log level tags, we insert them here
 	 */
-	for (p = printk_buf; *p; p++) {
+	for ( ; *p; p++) {
 		if (new_text_line) {
-			/* If a token, set current_log_level and skip over */
-			if (p[0] == '<' && p[1] >= '0' && p[1] <= '7' &&
-			    p[2] == '>') {
-				current_log_level = p[1] - '0';
-				p += 3;
-				printed_len -= 3;
-			}
-
 			/* Always output the token */
 			emit_log_char('<');
 			emit_log_char(current_log_level + '0');
diff --git a/kernel/profile.c b/kernel/profile.c
index 28cf26ad2d2..69911b5745e 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -365,7 +365,7 @@ static int __cpuinit profile_cpu_callback(struct notifier_block *info,
 		node = cpu_to_node(cpu);
 		per_cpu(cpu_profile_flip, cpu) = 0;
 		if (!per_cpu(cpu_profile_hits, cpu)[1]) {
-			page = alloc_pages_node(node,
+			page = alloc_pages_exact_node(node,
 					GFP_KERNEL | __GFP_ZERO,
 					0);
 			if (!page)
@@ -373,7 +373,7 @@ static int __cpuinit profile_cpu_callback(struct notifier_block *info,
 			per_cpu(cpu_profile_hits, cpu)[1] = page_address(page);
 		}
 		if (!per_cpu(cpu_profile_hits, cpu)[0]) {
-			page = alloc_pages_node(node,
+			page = alloc_pages_exact_node(node,
 					GFP_KERNEL | __GFP_ZERO,
 					0);
 			if (!page)
@@ -564,14 +564,14 @@ static int create_hash_tables(void)
 		int node = cpu_to_node(cpu);
 		struct page *page;
 
-		page = alloc_pages_node(node,
+		page = alloc_pages_exact_node(node,
 				GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
 				0);
 		if (!page)
 			goto out_cleanup;
 		per_cpu(cpu_profile_hits, cpu)[1]
 				= (struct profile_hit *)page_address(page);
-		page = alloc_pages_node(node,
+		page = alloc_pages_exact_node(node,
 				GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
 				0);
 		if (!page)
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index 820c5af44f3..fcd107a78c5 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -902,7 +902,7 @@ EXPORT_SYMBOL_GPL(rt_mutex_lock_interruptible);
  * Returns:
  *  0 		on success
  * -EINTR 	when interrupted by a signal
- * -ETIMEOUT	when the timeout expired
+ * -ETIMEDOUT	when the timeout expired
  * -EDEADLK	when the lock would deadlock (when deadlock detection is on)
  */
 int
diff --git a/kernel/sched.c b/kernel/sched.c
index 8ec9d13140b..8fb88a906aa 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -240,7 +240,7 @@ static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
 		hard = hrtimer_get_expires(&rt_b->rt_period_timer);
 		delta = ktime_to_ns(ktime_sub(hard, soft));
 		__hrtimer_start_range_ns(&rt_b->rt_period_timer, soft, delta,
-				HRTIMER_MODE_ABS, 0);
+				HRTIMER_MODE_ABS_PINNED, 0);
 	}
 	spin_unlock(&rt_b->rt_runtime_lock);
 }
@@ -1155,7 +1155,7 @@ static __init void init_hrtick(void)
 static void hrtick_start(struct rq *rq, u64 delay)
 {
 	__hrtimer_start_range_ns(&rq->hrtick_timer, ns_to_ktime(delay), 0,
-			HRTIMER_MODE_REL, 0);
+			HRTIMER_MODE_REL_PINNED, 0);
 }
 
 static inline void init_hrtick(void)
@@ -4397,6 +4397,11 @@ static struct {
 	.load_balancer = ATOMIC_INIT(-1),
 };
 
+int get_nohz_load_balancer(void)
+{
+	return atomic_read(&nohz.load_balancer);
+}
+
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
 /**
  * lowest_flag_domain - Return lowest sched_domain containing flag.
@@ -9029,6 +9034,8 @@ void __init sched_init_smp(void)
 }
 #endif /* CONFIG_SMP */
 
+const_debug unsigned int sysctl_timer_migration = 1;
+
 int in_sched_functions(unsigned long addr)
 {
 	return in_lock_functions(addr) ||
diff --git a/kernel/signal.c b/kernel/signal.c
index 809a228019a..d81f4952eeb 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -832,6 +832,7 @@ static int __send_signal(int sig, struct siginfo *info, struct task_struct *t,
 {
 	struct sigpending *pending;
 	struct sigqueue *q;
+	int override_rlimit;
 
 	trace_sched_signal_send(sig, t);
 
@@ -863,9 +864,13 @@ static int __send_signal(int sig, struct siginfo *info, struct task_struct *t,
 	   make sure at least one signal gets delivered and don't
 	   pass on the info struct.  */
 
-	q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
-					     (is_si_special(info) ||
-					      info->si_code >= 0)));
+	if (sig < SIGRTMIN)
+		override_rlimit = (is_si_special(info) || info->si_code >= 0);
+	else
+		override_rlimit = 0;
+
+	q = __sigqueue_alloc(t, GFP_ATOMIC | __GFP_NOTRACK_FALSE_POSITIVE,
+		override_rlimit);
 	if (q) {
 		list_add_tail(&q->list, &pending->list);
 		switch ((unsigned long) info) {
diff --git a/kernel/slow-work.c b/kernel/slow-work.c
index 521ed2004d6..09d7519557d 100644
--- a/kernel/slow-work.c
+++ b/kernel/slow-work.c
@@ -319,6 +319,15 @@ cant_get_ref:
 EXPORT_SYMBOL(slow_work_enqueue);
 
 /*
+ * Schedule a cull of the thread pool at some time in the near future
+ */
+static void slow_work_schedule_cull(void)
+{
+	mod_timer(&slow_work_cull_timer,
+		  round_jiffies(jiffies + SLOW_WORK_CULL_TIMEOUT));
+}
+
+/*
  * Worker thread culling algorithm
  */
 static bool slow_work_cull_thread(void)
@@ -335,8 +344,7 @@ static bool slow_work_cull_thread(void)
 		    list_empty(&vslow_work_queue) &&
 		    atomic_read(&slow_work_thread_count) >
 		    slow_work_min_threads) {
-			mod_timer(&slow_work_cull_timer,
-				  jiffies + SLOW_WORK_CULL_TIMEOUT);
+			slow_work_schedule_cull();
 			do_cull = true;
 		}
 	}
@@ -393,8 +401,7 @@ static int slow_work_thread(void *_data)
 			    list_empty(&vslow_work_queue) &&
 			    atomic_read(&slow_work_thread_count) >
 			    slow_work_min_threads)
-				mod_timer(&slow_work_cull_timer,
-					  jiffies + SLOW_WORK_CULL_TIMEOUT);
+				slow_work_schedule_cull();
 			continue;
 		}
 
@@ -458,7 +465,7 @@ static void slow_work_new_thread_execute(struct slow_work *work)
 		if (atomic_dec_and_test(&slow_work_thread_count))
 			BUG(); /* we're running on a slow work thread... */
 		mod_timer(&slow_work_oom_timer,
-			  jiffies + SLOW_WORK_OOM_TIMEOUT);
+			  round_jiffies(jiffies + SLOW_WORK_OOM_TIMEOUT));
 	} else {
 		/* ratelimit the starting of new threads */
 		mod_timer(&slow_work_oom_timer, jiffies + 1);
@@ -502,8 +509,7 @@ static int slow_work_min_threads_sysctl(struct ctl_table *table, int write,
 			if (n < 0 && !slow_work_may_not_start_new_thread)
 				slow_work_enqueue(&slow_work_new_thread);
 			else if (n > 0)
-				mod_timer(&slow_work_cull_timer,
-					  jiffies + SLOW_WORK_CULL_TIMEOUT);
+				slow_work_schedule_cull();
 		}
 		mutex_unlock(&slow_work_user_lock);
 	}
@@ -529,8 +535,7 @@ static int slow_work_max_threads_sysctl(struct ctl_table *table, int write,
 				atomic_read(&slow_work_thread_count);
 
 			if (n < 0)
-				mod_timer(&slow_work_cull_timer,
-					  jiffies + SLOW_WORK_CULL_TIMEOUT);
+				slow_work_schedule_cull();
 		}
 		mutex_unlock(&slow_work_user_lock);
 	}
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 258885a543d..b41fb710e11 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -382,6 +382,17 @@ void __tasklet_hi_schedule(struct tasklet_struct *t)
 
 EXPORT_SYMBOL(__tasklet_hi_schedule);
 
+void __tasklet_hi_schedule_first(struct tasklet_struct *t)
+{
+	BUG_ON(!irqs_disabled());
+
+	t->next = __get_cpu_var(tasklet_hi_vec).head;
+	__get_cpu_var(tasklet_hi_vec).head = t;
+	__raise_softirq_irqoff(HI_SOFTIRQ);
+}
+
+EXPORT_SYMBOL(__tasklet_hi_schedule_first);
+
 static void tasklet_action(struct softirq_action *a)
 {
 	struct tasklet_struct *list;
diff --git a/kernel/sys.c b/kernel/sys.c
index 438d99a38c8..b3f1097c76f 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1113,289 +1113,6 @@ out:
 	return err;
 }
 
-/*
- * Supplementary group IDs
- */
-
-/* init to 2 - one for init_task, one to ensure it is never freed */
-struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
-
-struct group_info *groups_alloc(int gidsetsize)
-{
-	struct group_info *group_info;
-	int nblocks;
-	int i;
-
-	nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
-	/* Make sure we always allocate at least one indirect block pointer */
-	nblocks = nblocks ? : 1;
-	group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
-	if (!group_info)
-		return NULL;
-	group_info->ngroups = gidsetsize;
-	group_info->nblocks = nblocks;
-	atomic_set(&group_info->usage, 1);
-
-	if (gidsetsize <= NGROUPS_SMALL)
-		group_info->blocks[0] = group_info->small_block;
-	else {
-		for (i = 0; i < nblocks; i++) {
-			gid_t *b;
-			b = (void *)__get_free_page(GFP_USER);
-			if (!b)
-				goto out_undo_partial_alloc;
-			group_info->blocks[i] = b;
-		}
-	}
-	return group_info;
-
-out_undo_partial_alloc:
-	while (--i >= 0) {
-		free_page((unsigned long)group_info->blocks[i]);
-	}
-	kfree(group_info);
-	return NULL;
-}
-
-EXPORT_SYMBOL(groups_alloc);
-
-void groups_free(struct group_info *group_info)
-{
-	if (group_info->blocks[0] != group_info->small_block) {
-		int i;
-		for (i = 0; i < group_info->nblocks; i++)
-			free_page((unsigned long)group_info->blocks[i]);
-	}
-	kfree(group_info);
-}
-
-EXPORT_SYMBOL(groups_free);
-
-/* export the group_info to a user-space array */
-static int groups_to_user(gid_t __user *grouplist,
-			  const struct group_info *group_info)
-{
-	int i;
-	unsigned int count = group_info->ngroups;
-
-	for (i = 0; i < group_info->nblocks; i++) {
-		unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
-		unsigned int len = cp_count * sizeof(*grouplist);
-
-		if (copy_to_user(grouplist, group_info->blocks[i], len))
-			return -EFAULT;
-
-		grouplist += NGROUPS_PER_BLOCK;
-		count -= cp_count;
-	}
-	return 0;
-}
-
-/* fill a group_info from a user-space array - it must be allocated already */
-static int groups_from_user(struct group_info *group_info,
-    gid_t __user *grouplist)
-{
-	int i;
-	unsigned int count = group_info->ngroups;
-
-	for (i = 0; i < group_info->nblocks; i++) {
-		unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
-		unsigned int len = cp_count * sizeof(*grouplist);
-
-		if (copy_from_user(group_info->blocks[i], grouplist, len))
-			return -EFAULT;
-
-		grouplist += NGROUPS_PER_BLOCK;
-		count -= cp_count;
-	}
-	return 0;
-}
-
-/* a simple Shell sort */
-static void groups_sort(struct group_info *group_info)
-{
-	int base, max, stride;
-	int gidsetsize = group_info->ngroups;
-
-	for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
-		; /* nothing */
-	stride /= 3;
-
-	while (stride) {
-		max = gidsetsize - stride;
-		for (base = 0; base < max; base++) {
-			int left = base;
-			int right = left + stride;
-			gid_t tmp = GROUP_AT(group_info, right);
-
-			while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
-				GROUP_AT(group_info, right) =
-				    GROUP_AT(group_info, left);
-				right = left;
-				left -= stride;
-			}
-			GROUP_AT(group_info, right) = tmp;
-		}
-		stride /= 3;
-	}
-}
-
-/* a simple bsearch */
-int groups_search(const struct group_info *group_info, gid_t grp)
-{
-	unsigned int left, right;
-
-	if (!group_info)
-		return 0;
-
-	left = 0;
-	right = group_info->ngroups;
-	while (left < right) {
-		unsigned int mid = (left+right)/2;
-		int cmp = grp - GROUP_AT(group_info, mid);
-		if (cmp > 0)
-			left = mid + 1;
-		else if (cmp < 0)
-			right = mid;
-		else
-			return 1;
-	}
-	return 0;
-}
-
-/**
- * set_groups - Change a group subscription in a set of credentials
- * @new: The newly prepared set of credentials to alter
- * @group_info: The group list to install
- *
- * Validate a group subscription and, if valid, insert it into a set
- * of credentials.
- */
-int set_groups(struct cred *new, struct group_info *group_info)
-{
-	int retval;
-
-	retval = security_task_setgroups(group_info);
-	if (retval)
-		return retval;
-
-	put_group_info(new->group_info);
-	groups_sort(group_info);
-	get_group_info(group_info);
-	new->group_info = group_info;
-	return 0;
-}
-
-EXPORT_SYMBOL(set_groups);
-
-/**
- * set_current_groups - Change current's group subscription
- * @group_info: The group list to impose
- *
- * Validate a group subscription and, if valid, impose it upon current's task
- * security record.
- */
-int set_current_groups(struct group_info *group_info)
-{
-	struct cred *new;
-	int ret;
-
-	new = prepare_creds();
-	if (!new)
-		return -ENOMEM;
-
-	ret = set_groups(new, group_info);
-	if (ret < 0) {
-		abort_creds(new);
-		return ret;
-	}
-
-	return commit_creds(new);
-}
-
-EXPORT_SYMBOL(set_current_groups);
-
-SYSCALL_DEFINE2(getgroups, int, gidsetsize, gid_t __user *, grouplist)
-{
-	const struct cred *cred = current_cred();
-	int i;
-
-	if (gidsetsize < 0)
-		return -EINVAL;
-
-	/* no need to grab task_lock here; it cannot change */
-	i = cred->group_info->ngroups;
-	if (gidsetsize) {
-		if (i > gidsetsize) {
-			i = -EINVAL;
-			goto out;
-		}
-		if (groups_to_user(grouplist, cred->group_info)) {
-			i = -EFAULT;
-			goto out;
-		}
-	}
-out:
-	return i;
-}
-
-/*
- *	SMP: Our groups are copy-on-write. We can set them safely
- *	without another task interfering.
- */
- 
-SYSCALL_DEFINE2(setgroups, int, gidsetsize, gid_t __user *, grouplist)
-{
-	struct group_info *group_info;
-	int retval;
-
-	if (!capable(CAP_SETGID))
-		return -EPERM;
-	if ((unsigned)gidsetsize > NGROUPS_MAX)
-		return -EINVAL;
-
-	group_info = groups_alloc(gidsetsize);
-	if (!group_info)
-		return -ENOMEM;
-	retval = groups_from_user(group_info, grouplist);
-	if (retval) {
-		put_group_info(group_info);
-		return retval;
-	}
-
-	retval = set_current_groups(group_info);
-	put_group_info(group_info);
-
-	return retval;
-}
-
-/*
- * Check whether we're fsgid/egid or in the supplemental group..
- */
-int in_group_p(gid_t grp)
-{
-	const struct cred *cred = current_cred();
-	int retval = 1;
-
-	if (grp != cred->fsgid)
-		retval = groups_search(cred->group_info, grp);
-	return retval;
-}
-
-EXPORT_SYMBOL(in_group_p);
-
-int in_egroup_p(gid_t grp)
-{
-	const struct cred *cred = current_cred();
-	int retval = 1;
-
-	if (grp != cred->egid)
-		retval = groups_search(cred->group_info, grp);
-	return retval;
-}
-
-EXPORT_SYMBOL(in_egroup_p);
-
 DECLARE_RWSEM(uts_sem);
 
 SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ce664f98e3f..ab462b9968d 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -27,6 +27,7 @@
 #include <linux/security.h>
 #include <linux/ctype.h>
 #include <linux/utsname.h>
+#include <linux/kmemcheck.h>
 #include <linux/smp_lock.h>
 #include <linux/fs.h>
 #include <linux/init.h>
@@ -328,6 +329,14 @@ static struct ctl_table kern_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "timer_migration",
+		.data		= &sysctl_timer_migration,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
 #endif
 	{
 		.ctl_name	= CTL_UNNUMBERED,
@@ -959,6 +968,17 @@ static struct ctl_table kern_table[] = {
 		.proc_handler	= &proc_dointvec,
 	},
 #endif
+#ifdef CONFIG_KMEMCHECK
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "kmemcheck",
+		.data		= &kmemcheck_enabled,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+#endif
+
 /*
  * NOTE: do not add new entries to this table unless you have read
  * Documentation/sysctl/ctl_unnumbered.txt
@@ -1317,7 +1337,6 @@ static struct ctl_table vm_table[] = {
 		.extra2		= &one,
 	},
 #endif
-#ifdef CONFIG_UNEVICTABLE_LRU
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "scan_unevictable_pages",
@@ -1326,7 +1345,6 @@ static struct ctl_table vm_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &scan_unevictable_handler,
 	},
-#endif
 /*
  * NOTE: do not add new entries to this table unless you have read
  * Documentation/sysctl/ctl_unnumbered.txt
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index d13be216a79..1ad6dd46111 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -18,6 +18,7 @@
 #include <linux/notifier.h>
 #include <linux/smp.h>
 #include <linux/sysdev.h>
+#include <linux/tick.h>
 
 /* The registered clock event devices */
 static LIST_HEAD(clockevent_devices);
@@ -54,6 +55,7 @@ unsigned long clockevent_delta2ns(unsigned long latch,
 
 	return (unsigned long) clc;
 }
+EXPORT_SYMBOL_GPL(clockevent_delta2ns);
 
 /**
  * clockevents_set_mode - set the operating mode of a clock event device
@@ -187,6 +189,7 @@ void clockevents_register_device(struct clock_event_device *dev)
 
 	spin_unlock(&clockevents_lock);
 }
+EXPORT_SYMBOL_GPL(clockevents_register_device);
 
 /*
  * Noop handler when we shut down an event device
@@ -251,4 +254,15 @@ void clockevents_notify(unsigned long reason, void *arg)
 	spin_unlock(&clockevents_lock);
 }
 EXPORT_SYMBOL_GPL(clockevents_notify);
+
+ktime_t clockevents_get_next_event(int cpu)
+{
+	struct tick_device *td;
+	struct clock_event_device *dev;
+
+	td = &per_cpu(tick_cpu_device, cpu);
+	dev = td->evtdev;
+
+	return dev->next_event;
+}
 #endif
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 80189f6f1c5..592bf584d1d 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -509,6 +509,18 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
 		}
 	}
 
+	/*
+	 * Check to make sure we don't switch to a non-highres capable
+	 * clocksource if the tick code is in oneshot mode (highres or nohz)
+	 */
+	if (tick_oneshot_mode_active() &&
+	    !(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) {
+		printk(KERN_WARNING "%s clocksource is not HRT compatible. "
+			"Cannot switch while in HRT/NOHZ mode\n", ovr->name);
+		ovr = NULL;
+		override_name[0] = 0;
+	}
+
 	/* Reselect, when the override name has changed */
 	if (ovr != clocksource_override) {
 		clocksource_override = ovr;
@@ -537,7 +549,13 @@ sysfs_show_available_clocksources(struct sys_device *dev,
 
 	spin_lock_irq(&clocksource_lock);
 	list_for_each_entry(src, &clocksource_list, list) {
-		count += snprintf(buf + count,
+		/*
+		 * Don't show non-HRES clocksource if the tick code is
+		 * in one shot mode (highres=on or nohz=on)
+		 */
+		if (!tick_oneshot_mode_active() ||
+		    (src->flags & CLOCK_SOURCE_VALID_FOR_HRES))
+			count += snprintf(buf + count,
 				  max((ssize_t)PAGE_SIZE - count, (ssize_t)0),
 				  "%s ", src->name);
 	}
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 118a3b3b3f9..877dbedc311 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -27,7 +27,7 @@
  * timer stops in C3 state.
  */
 
-struct tick_device tick_broadcast_device;
+static struct tick_device tick_broadcast_device;
 /* FIXME: Use cpumask_var_t. */
 static DECLARE_BITMAP(tick_broadcast_mask, NR_CPUS);
 static DECLARE_BITMAP(tmpmask, NR_CPUS);
diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c
index 2e8de678e76..a96c0e2b89c 100644
--- a/kernel/time/tick-oneshot.c
+++ b/kernel/time/tick-oneshot.c
@@ -128,6 +128,23 @@ int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *))
 	return 0;
 }
 
+/**
+ * tick_check_oneshot_mode - check whether the system is in oneshot mode
+ *
+ * returns 1 when either nohz or highres are enabled. otherwise 0.
+ */
+int tick_oneshot_mode_active(void)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret = __get_cpu_var(tick_cpu_device).mode == TICKDEV_MODE_ONESHOT;
+	local_irq_restore(flags);
+
+	return ret;
+}
+
 #ifdef CONFIG_HIGH_RES_TIMERS
 /**
  * tick_init_highres - switch to high resolution mode
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index d3f1ef4d5cb..2aff39c6f10 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -349,7 +349,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 
 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
 			hrtimer_start(&ts->sched_timer, expires,
-				      HRTIMER_MODE_ABS);
+				      HRTIMER_MODE_ABS_PINNED);
 			/* Check, if the timer was already in the past */
 			if (hrtimer_active(&ts->sched_timer))
 				goto out;
@@ -395,7 +395,7 @@ static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
 
 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
 			hrtimer_start_expires(&ts->sched_timer,
-				      HRTIMER_MODE_ABS);
+					      HRTIMER_MODE_ABS_PINNED);
 			/* Check, if the timer was already in the past */
 			if (hrtimer_active(&ts->sched_timer))
 				break;
@@ -698,7 +698,8 @@ void tick_setup_sched_timer(void)
 
 	for (;;) {
 		hrtimer_forward(&ts->sched_timer, now, tick_period);
-		hrtimer_start_expires(&ts->sched_timer, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(&ts->sched_timer,
+				      HRTIMER_MODE_ABS_PINNED);
 		/* Check, if the timer was already in the past */
 		if (hrtimer_active(&ts->sched_timer))
 			break;
diff --git a/kernel/timer.c b/kernel/timer.c
index faf2db897de..54d3912f8ca 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -38,6 +38,7 @@
 #include <linux/tick.h>
 #include <linux/kallsyms.h>
 #include <linux/perf_counter.h>
+#include <linux/sched.h>
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -605,13 +606,12 @@ static struct tvec_base *lock_timer_base(struct timer_list *timer,
 }
 
 static inline int
-__mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
+__mod_timer(struct timer_list *timer, unsigned long expires,
+						bool pending_only, int pinned)
 {
 	struct tvec_base *base, *new_base;
 	unsigned long flags;
-	int ret;
-
-	ret = 0;
+	int ret = 0 , cpu;
 
 	timer_stats_timer_set_start_info(timer);
 	BUG_ON(!timer->function);
@@ -630,6 +630,18 @@ __mod_timer(struct timer_list *timer, unsigned long expires, bool pending_only)
 
 	new_base = __get_cpu_var(tvec_bases);
 
+	cpu = smp_processor_id();
+
+#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
+	if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
+		int preferred_cpu = get_nohz_load_balancer();
+
+		if (preferred_cpu >= 0)
+			cpu = preferred_cpu;
+	}
+#endif
+	new_base = per_cpu(tvec_bases, cpu);
+
 	if (base != new_base) {
 		/*
 		 * We are trying to schedule the timer on the local CPU.
@@ -669,7 +681,7 @@ out_unlock:
  */
 int mod_timer_pending(struct timer_list *timer, unsigned long expires)
 {
-	return __mod_timer(timer, expires, true);
+	return __mod_timer(timer, expires, true, TIMER_NOT_PINNED);
 }
 EXPORT_SYMBOL(mod_timer_pending);
 
@@ -703,11 +715,33 @@ int mod_timer(struct timer_list *timer, unsigned long expires)
 	if (timer->expires == expires && timer_pending(timer))
 		return 1;
 
-	return __mod_timer(timer, expires, false);
+	return __mod_timer(timer, expires, false, TIMER_NOT_PINNED);
 }
 EXPORT_SYMBOL(mod_timer);
 
 /**
+ * mod_timer_pinned - modify a timer's timeout
+ * @timer: the timer to be modified
+ * @expires: new timeout in jiffies
+ *
+ * mod_timer_pinned() is a way to update the expire field of an
+ * active timer (if the timer is inactive it will be activated)
+ * and not allow the timer to be migrated to a different CPU.
+ *
+ * mod_timer_pinned(timer, expires) is equivalent to:
+ *
+ *     del_timer(timer); timer->expires = expires; add_timer(timer);
+ */
+int mod_timer_pinned(struct timer_list *timer, unsigned long expires)
+{
+	if (timer->expires == expires && timer_pending(timer))
+		return 1;
+
+	return __mod_timer(timer, expires, false, TIMER_PINNED);
+}
+EXPORT_SYMBOL(mod_timer_pinned);
+
+/**
  * add_timer - start a timer
  * @timer: the timer to be added
  *
@@ -1017,6 +1051,9 @@ cascade:
 		index = slot = timer_jiffies & TVN_MASK;
 		do {
 			list_for_each_entry(nte, varp->vec + slot, entry) {
+				if (tbase_get_deferrable(nte->base))
+					continue;
+
 				found = 1;
 				if (time_before(nte->expires, expires))
 					expires = nte->expires;
@@ -1307,7 +1344,7 @@ signed long __sched schedule_timeout(signed long timeout)
 	expire = timeout + jiffies;
 
 	setup_timer_on_stack(&timer, process_timeout, (unsigned long)current);
-	__mod_timer(&timer, expire, false);
+	__mod_timer(&timer, expire, false, TIMER_NOT_PINNED);
 	schedule();
 	del_singleshot_timer_sync(&timer);
 
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 4a13e5a01ce..61071fecc82 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -147,7 +147,7 @@ config IRQSOFF_TRACER
 	  disabled by default and can be runtime (re-)started
 	  via:
 
-	      echo 0 > /debugfs/tracing/tracing_max_latency
+	      echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
 
 	  (Note that kernel size and overhead increases with this option
 	  enabled. This option and the preempt-off timing option can be
@@ -168,7 +168,7 @@ config PREEMPT_TRACER
 	  disabled by default and can be runtime (re-)started
 	  via:
 
-	      echo 0 > /debugfs/tracing/tracing_max_latency
+	      echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
 
 	  (Note that kernel size and overhead increases with this option
 	  enabled. This option and the irqs-off timing option can be
@@ -261,7 +261,7 @@ config PROFILE_ANNOTATED_BRANCHES
 	  This tracer profiles all the the likely and unlikely macros
 	  in the kernel. It will display the results in:
 
-	  /debugfs/tracing/profile_annotated_branch
+	  /sys/kernel/debug/tracing/profile_annotated_branch
 
 	  Note: this will add a significant overhead, only turn this
 	  on if you need to profile the system's use of these macros.
@@ -274,7 +274,7 @@ config PROFILE_ALL_BRANCHES
 	  taken in the kernel is recorded whether it hit or miss.
 	  The results will be displayed in:
 
-	  /debugfs/tracing/profile_branch
+	  /sys/kernel/debug/tracing/profile_branch
 
 	  This option also enables the likely/unlikely profiler.
 
@@ -323,7 +323,7 @@ config STACK_TRACER
 	select KALLSYMS
 	help
 	  This special tracer records the maximum stack footprint of the
-	  kernel and displays it in debugfs/tracing/stack_trace.
+	  kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
 
 	  This tracer works by hooking into every function call that the
 	  kernel executes, and keeping a maximum stack depth value and
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 2e642b2b725..dc4dc70171c 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
 #include <linux/hardirq.h>
+#include <linux/kmemcheck.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
 #include <linux/mutex.h>
@@ -1270,6 +1271,7 @@ rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
 	if (tail < BUF_PAGE_SIZE) {
 		/* Mark the rest of the page with padding */
 		event = __rb_page_index(tail_page, tail);
+		kmemcheck_annotate_bitfield(event, bitfield);
 		rb_event_set_padding(event);
 	}
 
@@ -1327,6 +1329,7 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
 		return NULL;
 
 	event = __rb_page_index(tail_page, tail);
+	kmemcheck_annotate_bitfield(event, bitfield);
 	rb_update_event(event, type, length);
 
 	/* The passed in type is zero for DATA */
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 8acd9b81a5d..c1878bfb2e1 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -344,7 +344,7 @@ static raw_spinlock_t ftrace_max_lock =
 /*
  * Copy the new maximum trace into the separate maximum-trace
  * structure. (this way the maximum trace is permanently saved,
- * for later retrieval via /debugfs/tracing/latency_trace)
+ * for later retrieval via /sys/kernel/debug/tracing/latency_trace)
  */
 static void
 __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
@@ -2414,21 +2414,20 @@ static const struct file_operations tracing_iter_fops = {
 
 static const char readme_msg[] =
 	"tracing mini-HOWTO:\n\n"
-	"# mkdir /debug\n"
-	"# mount -t debugfs nodev /debug\n\n"
-	"# cat /debug/tracing/available_tracers\n"
+	"# mount -t debugfs nodev /sys/kernel/debug\n\n"
+	"# cat /sys/kernel/debug/tracing/available_tracers\n"
 	"wakeup preemptirqsoff preemptoff irqsoff function sched_switch nop\n\n"
-	"# cat /debug/tracing/current_tracer\n"
+	"# cat /sys/kernel/debug/tracing/current_tracer\n"
 	"nop\n"
-	"# echo sched_switch > /debug/tracing/current_tracer\n"
-	"# cat /debug/tracing/current_tracer\n"
+	"# echo sched_switch > /sys/kernel/debug/tracing/current_tracer\n"
+	"# cat /sys/kernel/debug/tracing/current_tracer\n"
 	"sched_switch\n"
-	"# cat /debug/tracing/trace_options\n"
+	"# cat /sys/kernel/debug/tracing/trace_options\n"
 	"noprint-parent nosym-offset nosym-addr noverbose\n"
-	"# echo print-parent > /debug/tracing/trace_options\n"
-	"# echo 1 > /debug/tracing/tracing_enabled\n"
-	"# cat /debug/tracing/trace > /tmp/trace.txt\n"
-	"# echo 0 > /debug/tracing/tracing_enabled\n"
+	"# echo print-parent > /sys/kernel/debug/tracing/trace_options\n"
+	"# echo 1 > /sys/kernel/debug/tracing/tracing_enabled\n"
+	"# cat /sys/kernel/debug/tracing/trace > /tmp/trace.txt\n"
+	"# echo 0 > /sys/kernel/debug/tracing/tracing_enabled\n"
 ;
 
 static ssize_t
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index e04b76cc238..f6693969287 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -203,7 +203,8 @@ static void start_stack_timer(void *unused)
 	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	hrtimer->function = stack_trace_timer_fn;
 
-	hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
+	hrtimer_start(hrtimer, ns_to_ktime(sample_period),
+		      HRTIMER_MODE_REL_PINNED);
 }
 
 static void start_stack_timers(void)
diff --git a/kernel/user.c b/kernel/user.c
index 850e0ba41c1..2c000e7132a 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -75,21 +75,6 @@ static void uid_hash_remove(struct user_struct *up)
 	put_user_ns(up->user_ns);
 }
 
-static struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent)
-{
-	struct user_struct *user;
-	struct hlist_node *h;
-
-	hlist_for_each_entry(user, h, hashent, uidhash_node) {
-		if (user->uid == uid) {
-			atomic_inc(&user->__count);
-			return user;
-		}
-	}
-
-	return NULL;
-}
-
 #ifdef CONFIG_USER_SCHED
 
 static void sched_destroy_user(struct user_struct *up)
@@ -119,6 +104,23 @@ static int sched_create_user(struct user_struct *up) { return 0; }
 
 #if defined(CONFIG_USER_SCHED) && defined(CONFIG_SYSFS)
 
+static struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent)
+{
+	struct user_struct *user;
+	struct hlist_node *h;
+
+	hlist_for_each_entry(user, h, hashent, uidhash_node) {
+		if (user->uid == uid) {
+			/* possibly resurrect an "almost deleted" object */
+			if (atomic_inc_return(&user->__count) == 1)
+				cancel_delayed_work(&user->work);
+			return user;
+		}
+	}
+
+	return NULL;
+}
+
 static struct kset *uids_kset; /* represents the /sys/kernel/uids/ directory */
 static DEFINE_MUTEX(uids_mutex);
 
@@ -283,12 +285,12 @@ int __init uids_sysfs_init(void)
 	return uids_user_create(&root_user);
 }
 
-/* work function to remove sysfs directory for a user and free up
+/* delayed work function to remove sysfs directory for a user and free up
  * corresponding structures.
  */
 static void cleanup_user_struct(struct work_struct *w)
 {
-	struct user_struct *up = container_of(w, struct user_struct, work);
+	struct user_struct *up = container_of(w, struct user_struct, work.work);
 	unsigned long flags;
 	int remove_user = 0;
 
@@ -297,15 +299,12 @@ static void cleanup_user_struct(struct work_struct *w)
 	 */
 	uids_mutex_lock();
 
-	local_irq_save(flags);
-
-	if (atomic_dec_and_lock(&up->__count, &uidhash_lock)) {
+	spin_lock_irqsave(&uidhash_lock, flags);
+	if (atomic_read(&up->__count) == 0) {
 		uid_hash_remove(up);
 		remove_user = 1;
-		spin_unlock_irqrestore(&uidhash_lock, flags);
-	} else {
-		local_irq_restore(flags);
 	}
+	spin_unlock_irqrestore(&uidhash_lock, flags);
 
 	if (!remove_user)
 		goto done;
@@ -331,16 +330,28 @@ done:
  */
 static void free_user(struct user_struct *up, unsigned long flags)
 {
-	/* restore back the count */
-	atomic_inc(&up->__count);
 	spin_unlock_irqrestore(&uidhash_lock, flags);
-
-	INIT_WORK(&up->work, cleanup_user_struct);
-	schedule_work(&up->work);
+	INIT_DELAYED_WORK(&up->work, cleanup_user_struct);
+	schedule_delayed_work(&up->work, msecs_to_jiffies(1000));
 }
 
 #else	/* CONFIG_USER_SCHED && CONFIG_SYSFS */
 
+static struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent)
+{
+	struct user_struct *user;
+	struct hlist_node *h;
+
+	hlist_for_each_entry(user, h, hashent, uidhash_node) {
+		if (user->uid == uid) {
+			atomic_inc(&user->__count);
+			return user;
+		}
+	}
+
+	return NULL;
+}
+
 int uids_sysfs_init(void) { return 0; }
 static inline int uids_user_create(struct user_struct *up) { return 0; }
 static inline void uids_mutex_lock(void) { }
diff --git a/lib/Kconfig b/lib/Kconfig
index 9960be04cbb..bb1326d3839 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -194,4 +194,10 @@ config DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
 config NLATTR
 	bool
 
+#
+# Generic 64-bit atomic support is selected if needed
+#
+config GENERIC_ATOMIC64
+       bool
+
 endmenu
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 116a35051be..6b0c2d8a212 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -300,7 +300,7 @@ config DEBUG_OBJECTS_ENABLE_DEFAULT
 
 config DEBUG_SLAB
 	bool "Debug slab memory allocations"
-	depends on DEBUG_KERNEL && SLAB
+	depends on DEBUG_KERNEL && SLAB && !KMEMCHECK
 	help
 	  Say Y here to have the kernel do limited verification on memory
 	  allocation as well as poisoning memory on free to catch use of freed
@@ -312,7 +312,7 @@ config DEBUG_SLAB_LEAK
 
 config SLUB_DEBUG_ON
 	bool "SLUB debugging on by default"
-	depends on SLUB && SLUB_DEBUG
+	depends on SLUB && SLUB_DEBUG && !KMEMCHECK
 	default n
 	help
 	  Boot with debugging on by default. SLUB boots by default with
@@ -996,3 +996,5 @@ config DMA_API_DEBUG
 source "samples/Kconfig"
 
 source "lib/Kconfig.kgdb"
+
+source "lib/Kconfig.kmemcheck"
diff --git a/lib/Kconfig.kmemcheck b/lib/Kconfig.kmemcheck
new file mode 100644
index 00000000000..603c81b6654
--- /dev/null
+++ b/lib/Kconfig.kmemcheck
@@ -0,0 +1,91 @@
+config HAVE_ARCH_KMEMCHECK
+	bool
+
+menuconfig KMEMCHECK
+	bool "kmemcheck: trap use of uninitialized memory"
+	depends on DEBUG_KERNEL
+	depends on !X86_USE_3DNOW
+	depends on SLUB || SLAB
+	depends on !CC_OPTIMIZE_FOR_SIZE
+	depends on !FUNCTION_TRACER
+	select FRAME_POINTER
+	select STACKTRACE
+	default n
+	help
+	  This option enables tracing of dynamically allocated kernel memory
+	  to see if memory is used before it has been given an initial value.
+	  Be aware that this requires half of your memory for bookkeeping and
+	  will insert extra code at *every* read and write to tracked memory
+	  thus slow down the kernel code (but user code is unaffected).
+
+	  The kernel may be started with kmemcheck=0 or kmemcheck=1 to disable
+	  or enable kmemcheck at boot-time. If the kernel is started with
+	  kmemcheck=0, the large memory and CPU overhead is not incurred.
+
+choice
+	prompt "kmemcheck: default mode at boot"
+	depends on KMEMCHECK
+	default KMEMCHECK_ONESHOT_BY_DEFAULT
+	help
+	  This option controls the default behaviour of kmemcheck when the
+	  kernel boots and no kmemcheck= parameter is given.
+
+config KMEMCHECK_DISABLED_BY_DEFAULT
+	bool "disabled"
+	depends on KMEMCHECK
+
+config KMEMCHECK_ENABLED_BY_DEFAULT
+	bool "enabled"
+	depends on KMEMCHECK
+
+config KMEMCHECK_ONESHOT_BY_DEFAULT
+	bool "one-shot"
+	depends on KMEMCHECK
+	help
+	  In one-shot mode, only the first error detected is reported before
+	  kmemcheck is disabled.
+
+endchoice
+
+config KMEMCHECK_QUEUE_SIZE
+	int "kmemcheck: error queue size"
+	depends on KMEMCHECK
+	default 64
+	help
+	  Select the maximum number of errors to store in the queue. Since
+	  errors can occur virtually anywhere and in any context, we need a
+	  temporary storage area which is guarantueed not to generate any
+	  other faults. The queue will be emptied as soon as a tasklet may
+	  be scheduled. If the queue is full, new error reports will be
+	  lost.
+
+config KMEMCHECK_SHADOW_COPY_SHIFT
+	int "kmemcheck: shadow copy size (5 => 32 bytes, 6 => 64 bytes)"
+	depends on KMEMCHECK
+	range 2 8
+	default 5
+	help
+	  Select the number of shadow bytes to save along with each entry of
+	  the queue. These bytes indicate what parts of an allocation are
+	  initialized, uninitialized, etc. and will be displayed when an
+	  error is detected to help the debugging of a particular problem.
+
+config KMEMCHECK_PARTIAL_OK
+	bool "kmemcheck: allow partially uninitialized memory"
+	depends on KMEMCHECK
+	default y
+	help
+	  This option works around certain GCC optimizations that produce
+	  32-bit reads from 16-bit variables where the upper 16 bits are
+	  thrown away afterwards. This may of course also hide some real
+	  bugs.
+
+config KMEMCHECK_BITOPS_OK
+	bool "kmemcheck: allow bit-field manipulation"
+	depends on KMEMCHECK
+	default n
+	help
+	  This option silences warnings that would be generated for bit-field
+	  accesses where not all the bits are initialized at the same time.
+	  This may also hide some real bugs.
+
diff --git a/lib/Makefile b/lib/Makefile
index 34c5c0e6222..8e9bcf9d326 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -95,6 +95,8 @@ obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o
 
 obj-$(CONFIG_GENERIC_CSUM) += checksum.o
 
+obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/atomic64.c b/lib/atomic64.c
new file mode 100644
index 00000000000..c5e72556241
--- /dev/null
+++ b/lib/atomic64.c
@@ -0,0 +1,175 @@
+/*
+ * Generic implementation of 64-bit atomics using spinlocks,
+ * useful on processors that don't have 64-bit atomic instructions.
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+
+/*
+ * We use a hashed array of spinlocks to provide exclusive access
+ * to each atomic64_t variable.  Since this is expected to used on
+ * systems with small numbers of CPUs (<= 4 or so), we use a
+ * relatively small array of 16 spinlocks to avoid wasting too much
+ * memory on the spinlock array.
+ */
+#define NR_LOCKS	16
+
+/*
+ * Ensure each lock is in a separate cacheline.
+ */
+static union {
+	spinlock_t lock;
+	char pad[L1_CACHE_BYTES];
+} atomic64_lock[NR_LOCKS] __cacheline_aligned_in_smp;
+
+static inline spinlock_t *lock_addr(const atomic64_t *v)
+{
+	unsigned long addr = (unsigned long) v;
+
+	addr >>= L1_CACHE_SHIFT;
+	addr ^= (addr >> 8) ^ (addr >> 16);
+	return &atomic64_lock[addr & (NR_LOCKS - 1)].lock;
+}
+
+long long atomic64_read(const atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+void atomic64_set(atomic64_t *v, long long i)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+
+	spin_lock_irqsave(lock, flags);
+	v->counter = i;
+	spin_unlock_irqrestore(lock, flags);
+}
+
+void atomic64_add(long long a, atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+
+	spin_lock_irqsave(lock, flags);
+	v->counter += a;
+	spin_unlock_irqrestore(lock, flags);
+}
+
+long long atomic64_add_return(long long a, atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter += a;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+void atomic64_sub(long long a, atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+
+	spin_lock_irqsave(lock, flags);
+	v->counter -= a;
+	spin_unlock_irqrestore(lock, flags);
+}
+
+long long atomic64_sub_return(long long a, atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter -= a;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+long long atomic64_dec_if_positive(atomic64_t *v)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter - 1;
+	if (val >= 0)
+		v->counter = val;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter;
+	if (val == o)
+		v->counter = n;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+long long atomic64_xchg(atomic64_t *v, long long new)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	long long val;
+
+	spin_lock_irqsave(lock, flags);
+	val = v->counter;
+	v->counter = new;
+	spin_unlock_irqrestore(lock, flags);
+	return val;
+}
+
+int atomic64_add_unless(atomic64_t *v, long long a, long long u)
+{
+	unsigned long flags;
+	spinlock_t *lock = lock_addr(v);
+	int ret = 1;
+
+	spin_lock_irqsave(lock, flags);
+	if (v->counter != u) {
+		v->counter += a;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(lock, flags);
+	return ret;
+}
+
+static int init_atomic64_lock(void)
+{
+	int i;
+
+	for (i = 0; i < NR_LOCKS; ++i)
+		spin_lock_init(&atomic64_lock[i].lock);
+	return 0;
+}
+
+pure_initcall(init_atomic64_lock);
diff --git a/lib/dec_and_lock.c b/lib/dec_and_lock.c
index a65c3145554..e73822aa6e9 100644
--- a/lib/dec_and_lock.c
+++ b/lib/dec_and_lock.c
@@ -19,11 +19,10 @@
  */
 int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
 {
-#ifdef CONFIG_SMP
 	/* Subtract 1 from counter unless that drops it to 0 (ie. it was 1) */
 	if (atomic_add_unless(atomic, -1, 1))
 		return 0;
-#endif
+
 	/* Otherwise do it the slow way */
 	spin_lock(lock);
 	if (atomic_dec_and_test(atomic))
diff --git a/lib/genalloc.c b/lib/genalloc.c
index f6d276db2d5..eed2bdb865e 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -85,7 +85,6 @@ void gen_pool_destroy(struct gen_pool *pool)
 	int bit, end_bit;
 
 
-	write_lock(&pool->lock);
 	list_for_each_safe(_chunk, _next_chunk, &pool->chunks) {
 		chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk);
 		list_del(&chunk->next_chunk);
diff --git a/lib/hexdump.c b/lib/hexdump.c
index f07c0db81d2..39af2560f76 100644
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -65,7 +65,8 @@ void hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
 
 		for (j = 0; j < ngroups; j++)
 			lx += scnprintf(linebuf + lx, linebuflen - lx,
-				"%16.16llx ", (unsigned long long)*(ptr8 + j));
+				"%s%16.16llx", j ? " " : "",
+				(unsigned long long)*(ptr8 + j));
 		ascii_column = 17 * ngroups + 2;
 		break;
 	}
@@ -76,7 +77,7 @@ void hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
 
 		for (j = 0; j < ngroups; j++)
 			lx += scnprintf(linebuf + lx, linebuflen - lx,
-				"%8.8x ", *(ptr4 + j));
+				"%s%8.8x", j ? " " : "", *(ptr4 + j));
 		ascii_column = 9 * ngroups + 2;
 		break;
 	}
@@ -87,19 +88,21 @@ void hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
 
 		for (j = 0; j < ngroups; j++)
 			lx += scnprintf(linebuf + lx, linebuflen - lx,
-				"%4.4x ", *(ptr2 + j));
+				"%s%4.4x", j ? " " : "", *(ptr2 + j));
 		ascii_column = 5 * ngroups + 2;
 		break;
 	}
 
 	default:
-		for (j = 0; (j < rowsize) && (j < len) && (lx + 4) < linebuflen;
-		     j++) {
+		for (j = 0; (j < len) && (lx + 3) <= linebuflen; j++) {
 			ch = ptr[j];
 			linebuf[lx++] = hex_asc_hi(ch);
 			linebuf[lx++] = hex_asc_lo(ch);
 			linebuf[lx++] = ' ';
 		}
+		if (j)
+			lx--;
+
 		ascii_column = 3 * rowsize + 2;
 		break;
 	}
@@ -108,7 +111,7 @@ void hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
 
 	while (lx < (linebuflen - 1) && lx < (ascii_column - 1))
 		linebuf[lx++] = ' ';
-	for (j = 0; (j < rowsize) && (j < len) && (lx + 2) < linebuflen; j++)
+	for (j = 0; (j < len) && (lx + 2) < linebuflen; j++)
 		linebuf[lx++] = (isascii(ptr[j]) && isprint(ptr[j])) ? ptr[j]
 				: '.';
 nil:
diff --git a/lib/kobject.c b/lib/kobject.c
index bacf6fe4f7a..b512b746d2a 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -793,11 +793,16 @@ static struct kset *kset_create(const char *name,
 				struct kobject *parent_kobj)
 {
 	struct kset *kset;
+	int retval;
 
 	kset = kzalloc(sizeof(*kset), GFP_KERNEL);
 	if (!kset)
 		return NULL;
-	kobject_set_name(&kset->kobj, name);
+	retval = kobject_set_name(&kset->kobj, name);
+	if (retval) {
+		kfree(kset);
+		return NULL;
+	}
 	kset->uevent_ops = uevent_ops;
 	kset->kobj.parent = parent_kobj;
 
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 4bb42a0344e..23abbd93cae 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -351,20 +351,12 @@ int radix_tree_insert(struct radix_tree_root *root,
 }
 EXPORT_SYMBOL(radix_tree_insert);
 
-/**
- *	radix_tree_lookup_slot    -    lookup a slot in a radix tree
- *	@root:		radix tree root
- *	@index:		index key
- *
- *	Returns:  the slot corresponding to the position @index in the
- *	radix tree @root. This is useful for update-if-exists operations.
- *
- *	This function can be called under rcu_read_lock iff the slot is not
- *	modified by radix_tree_replace_slot, otherwise it must be called
- *	exclusive from other writers. Any dereference of the slot must be done
- *	using radix_tree_deref_slot.
+/*
+ * is_slot == 1 : search for the slot.
+ * is_slot == 0 : search for the node.
  */
-void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
+static void *radix_tree_lookup_element(struct radix_tree_root *root,
+				unsigned long index, int is_slot)
 {
 	unsigned int height, shift;
 	struct radix_tree_node *node, **slot;
@@ -376,7 +368,7 @@ void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
 	if (!radix_tree_is_indirect_ptr(node)) {
 		if (index > 0)
 			return NULL;
-		return (void **)&root->rnode;
+		return is_slot ? (void *)&root->rnode : node;
 	}
 	node = radix_tree_indirect_to_ptr(node);
 
@@ -397,7 +389,25 @@ void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
 		height--;
 	} while (height > 0);
 
-	return (void **)slot;
+	return is_slot ? (void *)slot:node;
+}
+
+/**
+ *	radix_tree_lookup_slot    -    lookup a slot in a radix tree
+ *	@root:		radix tree root
+ *	@index:		index key
+ *
+ *	Returns:  the slot corresponding to the position @index in the
+ *	radix tree @root. This is useful for update-if-exists operations.
+ *
+ *	This function can be called under rcu_read_lock iff the slot is not
+ *	modified by radix_tree_replace_slot, otherwise it must be called
+ *	exclusive from other writers. Any dereference of the slot must be done
+ *	using radix_tree_deref_slot.
+ */
+void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
+{
+	return (void **)radix_tree_lookup_element(root, index, 1);
 }
 EXPORT_SYMBOL(radix_tree_lookup_slot);
 
@@ -415,38 +425,7 @@ EXPORT_SYMBOL(radix_tree_lookup_slot);
  */
 void *radix_tree_lookup(struct radix_tree_root *root, unsigned long index)
 {
-	unsigned int height, shift;
-	struct radix_tree_node *node, **slot;
-
-	node = rcu_dereference(root->rnode);
-	if (node == NULL)
-		return NULL;
-
-	if (!radix_tree_is_indirect_ptr(node)) {
-		if (index > 0)
-			return NULL;
-		return node;
-	}
-	node = radix_tree_indirect_to_ptr(node);
-
-	height = node->height;
-	if (index > radix_tree_maxindex(height))
-		return NULL;
-
-	shift = (height-1) * RADIX_TREE_MAP_SHIFT;
-
-	do {
-		slot = (struct radix_tree_node **)
-			(node->slots + ((index>>shift) & RADIX_TREE_MAP_MASK));
-		node = rcu_dereference(*slot);
-		if (node == NULL)
-			return NULL;
-
-		shift -= RADIX_TREE_MAP_SHIFT;
-		height--;
-	} while (height > 0);
-
-	return node;
+	return radix_tree_lookup_element(root, index, 0);
 }
 EXPORT_SYMBOL(radix_tree_lookup);
 
@@ -666,6 +645,43 @@ unsigned long radix_tree_next_hole(struct radix_tree_root *root,
 }
 EXPORT_SYMBOL(radix_tree_next_hole);
 
+/**
+ *	radix_tree_prev_hole    -    find the prev hole (not-present entry)
+ *	@root:		tree root
+ *	@index:		index key
+ *	@max_scan:	maximum range to search
+ *
+ *	Search backwards in the range [max(index-max_scan+1, 0), index]
+ *	for the first hole.
+ *
+ *	Returns: the index of the hole if found, otherwise returns an index
+ *	outside of the set specified (in which case 'index - return >= max_scan'
+ *	will be true). In rare cases of wrap-around, LONG_MAX will be returned.
+ *
+ *	radix_tree_next_hole may be called under rcu_read_lock. However, like
+ *	radix_tree_gang_lookup, this will not atomically search a snapshot of
+ *	the tree at a single point in time. For example, if a hole is created
+ *	at index 10, then subsequently a hole is created at index 5,
+ *	radix_tree_prev_hole covering both indexes may return 5 if called under
+ *	rcu_read_lock.
+ */
+unsigned long radix_tree_prev_hole(struct radix_tree_root *root,
+				   unsigned long index, unsigned long max_scan)
+{
+	unsigned long i;
+
+	for (i = 0; i < max_scan; i++) {
+		if (!radix_tree_lookup(root, index))
+			break;
+		index--;
+		if (index == LONG_MAX)
+			break;
+	}
+
+	return index;
+}
+EXPORT_SYMBOL(radix_tree_prev_hole);
+
 static unsigned int
 __lookup(struct radix_tree_node *slot, void ***results, unsigned long index,
 	unsigned int max_items, unsigned long *next_index)
diff --git a/lib/rbtree.c b/lib/rbtree.c
index f653659e0bc..e2aa3be2985 100644
--- a/lib/rbtree.c
+++ b/lib/rbtree.c
@@ -231,34 +231,34 @@ void rb_erase(struct rb_node *node, struct rb_root *root)
 		node = node->rb_right;
 		while ((left = node->rb_left) != NULL)
 			node = left;
+
+		if (rb_parent(old)) {
+			if (rb_parent(old)->rb_left == old)
+				rb_parent(old)->rb_left = node;
+			else
+				rb_parent(old)->rb_right = node;
+		} else
+			root->rb_node = node;
+
 		child = node->rb_right;
 		parent = rb_parent(node);
 		color = rb_color(node);
 
-		if (child)
-			rb_set_parent(child, parent);
 		if (parent == old) {
-			parent->rb_right = child;
 			parent = node;
-		} else
+		} else {
+			if (child)
+				rb_set_parent(child, parent);
 			parent->rb_left = child;
 
+			node->rb_right = old->rb_right;
+			rb_set_parent(old->rb_right, node);
+		}
+
 		node->rb_parent_color = old->rb_parent_color;
-		node->rb_right = old->rb_right;
 		node->rb_left = old->rb_left;
-
-		if (rb_parent(old))
-		{
-			if (rb_parent(old)->rb_left == old)
-				rb_parent(old)->rb_left = node;
-			else
-				rb_parent(old)->rb_right = node;
-		} else
-			root->rb_node = node;
-
 		rb_set_parent(old->rb_left, node);
-		if (old->rb_right)
-			rb_set_parent(old->rb_right, node);
+
 		goto color;
 	}
 
diff --git a/mm/Kconfig b/mm/Kconfig
index 71830ba7b98..c948d4ca8bd 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -128,11 +128,11 @@ config SPARSEMEM_VMEMMAP
 config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
 	depends on SPARSEMEM || X86_64_ACPI_NUMA
-	depends on HOTPLUG && !HIBERNATION && ARCH_ENABLE_MEMORY_HOTPLUG
+	depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG
 	depends on (IA64 || X86 || PPC64 || SUPERH || S390)
 
 comment "Memory hotplug is currently incompatible with Software Suspend"
-	depends on SPARSEMEM && HOTPLUG && HIBERNATION
+	depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390
 
 config MEMORY_HOTPLUG_SPARSE
 	def_bool y
@@ -203,25 +203,13 @@ config VIRT_TO_BUS
 	def_bool y
 	depends on !ARCH_NO_VIRT_TO_BUS
 
-config UNEVICTABLE_LRU
-	bool "Add LRU list to track non-evictable pages"
-	default y
-	help
-	  Keeps unevictable pages off of the active and inactive pageout
-	  lists, so kswapd will not waste CPU time or have its balancing
-	  algorithms thrown off by scanning these pages.  Selecting this
-	  will use one page flag and increase the code size a little,
-	  say Y unless you know what you are doing.
-
-	  See Documentation/vm/unevictable-lru.txt for more information.
-
 config HAVE_MLOCK
 	bool
 	default y if MMU=y
 
 config HAVE_MLOCKED_PAGE_BIT
 	bool
-	default y if HAVE_MLOCK=y && UNEVICTABLE_LRU=y
+	default y if HAVE_MLOCK=y
 
 config MMU_NOTIFIER
 	bool
diff --git a/mm/Kconfig.debug b/mm/Kconfig.debug
index bb01e298f26..aa99fd1f710 100644
--- a/mm/Kconfig.debug
+++ b/mm/Kconfig.debug
@@ -2,6 +2,7 @@ config DEBUG_PAGEALLOC
 	bool "Debug page memory allocations"
 	depends on DEBUG_KERNEL && ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	depends on !HIBERNATION || !PPC && !SPARC
+	depends on !KMEMCHECK
 	---help---
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types
diff --git a/mm/Makefile b/mm/Makefile
index e89acb090b4..5e0bd642669 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -12,6 +12,7 @@ obj-y			:= bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
 			   readahead.o swap.o truncate.o vmscan.o shmem.o \
 			   prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
 			   page_isolation.o mm_init.o $(mmu-y)
+obj-y += init-mm.o
 
 obj-$(CONFIG_PROC_PAGE_MONITOR) += pagewalk.o
 obj-$(CONFIG_BOUNCE)	+= bounce.o
@@ -27,6 +28,7 @@ obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
 obj-$(CONFIG_PAGE_POISONING) += debug-pagealloc.o
 obj-$(CONFIG_SLAB) += slab.o
 obj-$(CONFIG_SLUB) += slub.o
+obj-$(CONFIG_KMEMCHECK) += kmemcheck.o
 obj-$(CONFIG_FAILSLAB) += failslab.o
 obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
 obj-$(CONFIG_FS_XIP) += filemap_xip.o
diff --git a/mm/bounce.c b/mm/bounce.c
index 4ebe3ea8379..a2b76a588e3 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/hash.h>
 #include <linux/highmem.h>
-#include <linux/blktrace_api.h>
 #include <asm/tlbflush.h>
 
 #include <trace/events/block.h>
diff --git a/mm/fadvise.c b/mm/fadvise.c
index 54a0f8040af..e43359214f6 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -101,7 +101,7 @@ SYSCALL_DEFINE(fadvise64_64)(int fd, loff_t offset, loff_t len, int advice)
 		
 		ret = force_page_cache_readahead(mapping, file,
 				start_index,
-				max_sane_readahead(nrpages));
+				nrpages);
 		if (ret > 0)
 			ret = 0;
 		break;
diff --git a/mm/filemap.c b/mm/filemap.c
index 1b60f30cebf..22396713feb 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -521,7 +521,7 @@ struct page *__page_cache_alloc(gfp_t gfp)
 {
 	if (cpuset_do_page_mem_spread()) {
 		int n = cpuset_mem_spread_node();
-		return alloc_pages_node(n, gfp, 0);
+		return alloc_pages_exact_node(n, gfp, 0);
 	}
 	return alloc_pages(gfp, 0);
 }
@@ -1004,9 +1004,6 @@ EXPORT_SYMBOL(grab_cache_page_nowait);
 static void shrink_readahead_size_eio(struct file *filp,
 					struct file_ra_state *ra)
 {
-	if (!ra->ra_pages)
-		return;
-
 	ra->ra_pages /= 4;
 }
 
@@ -1390,8 +1387,7 @@ do_readahead(struct address_space *mapping, struct file *filp,
 	if (!mapping || !mapping->a_ops || !mapping->a_ops->readpage)
 		return -EINVAL;
 
-	force_page_cache_readahead(mapping, filp, index,
-					max_sane_readahead(nr));
+	force_page_cache_readahead(mapping, filp, index, nr);
 	return 0;
 }
 
@@ -1457,6 +1453,73 @@ static int page_cache_read(struct file *file, pgoff_t offset)
 
 #define MMAP_LOTSAMISS  (100)
 
+/*
+ * Synchronous readahead happens when we don't even find
+ * a page in the page cache at all.
+ */
+static void do_sync_mmap_readahead(struct vm_area_struct *vma,
+				   struct file_ra_state *ra,
+				   struct file *file,
+				   pgoff_t offset)
+{
+	unsigned long ra_pages;
+	struct address_space *mapping = file->f_mapping;
+
+	/* If we don't want any read-ahead, don't bother */
+	if (VM_RandomReadHint(vma))
+		return;
+
+	if (VM_SequentialReadHint(vma) ||
+			offset - 1 == (ra->prev_pos >> PAGE_CACHE_SHIFT)) {
+		page_cache_sync_readahead(mapping, ra, file, offset,
+					  ra->ra_pages);
+		return;
+	}
+
+	if (ra->mmap_miss < INT_MAX)
+		ra->mmap_miss++;
+
+	/*
+	 * Do we miss much more than hit in this file? If so,
+	 * stop bothering with read-ahead. It will only hurt.
+	 */
+	if (ra->mmap_miss > MMAP_LOTSAMISS)
+		return;
+
+	/*
+	 * mmap read-around
+	 */
+	ra_pages = max_sane_readahead(ra->ra_pages);
+	if (ra_pages) {
+		ra->start = max_t(long, 0, offset - ra_pages/2);
+		ra->size = ra_pages;
+		ra->async_size = 0;
+		ra_submit(ra, mapping, file);
+	}
+}
+
+/*
+ * Asynchronous readahead happens when we find the page and PG_readahead,
+ * so we want to possibly extend the readahead further..
+ */
+static void do_async_mmap_readahead(struct vm_area_struct *vma,
+				    struct file_ra_state *ra,
+				    struct file *file,
+				    struct page *page,
+				    pgoff_t offset)
+{
+	struct address_space *mapping = file->f_mapping;
+
+	/* If we don't want any read-ahead, don't bother */
+	if (VM_RandomReadHint(vma))
+		return;
+	if (ra->mmap_miss > 0)
+		ra->mmap_miss--;
+	if (PageReadahead(page))
+		page_cache_async_readahead(mapping, ra, file,
+					   page, offset, ra->ra_pages);
+}
+
 /**
  * filemap_fault - read in file data for page fault handling
  * @vma:	vma in which the fault was taken
@@ -1476,78 +1539,44 @@ int filemap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	struct address_space *mapping = file->f_mapping;
 	struct file_ra_state *ra = &file->f_ra;
 	struct inode *inode = mapping->host;
+	pgoff_t offset = vmf->pgoff;
 	struct page *page;
 	pgoff_t size;
-	int did_readaround = 0;
 	int ret = 0;
 
 	size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-	if (vmf->pgoff >= size)
+	if (offset >= size)
 		return VM_FAULT_SIGBUS;
 
-	/* If we don't want any read-ahead, don't bother */
-	if (VM_RandomReadHint(vma))
-		goto no_cached_page;
-
 	/*
 	 * Do we have something in the page cache already?
 	 */
-retry_find:
-	page = find_lock_page(mapping, vmf->pgoff);
-	/*
-	 * For sequential accesses, we use the generic readahead logic.
-	 */
-	if (VM_SequentialReadHint(vma)) {
-		if (!page) {
-			page_cache_sync_readahead(mapping, ra, file,
-							   vmf->pgoff, 1);
-			page = find_lock_page(mapping, vmf->pgoff);
-			if (!page)
-				goto no_cached_page;
-		}
-		if (PageReadahead(page)) {
-			page_cache_async_readahead(mapping, ra, file, page,
-							   vmf->pgoff, 1);
-		}
-	}
-
-	if (!page) {
-		unsigned long ra_pages;
-
-		ra->mmap_miss++;
-
+	page = find_get_page(mapping, offset);
+	if (likely(page)) {
 		/*
-		 * Do we miss much more than hit in this file? If so,
-		 * stop bothering with read-ahead. It will only hurt.
+		 * We found the page, so try async readahead before
+		 * waiting for the lock.
 		 */
-		if (ra->mmap_miss > MMAP_LOTSAMISS)
-			goto no_cached_page;
+		do_async_mmap_readahead(vma, ra, file, page, offset);
+		lock_page(page);
 
-		/*
-		 * To keep the pgmajfault counter straight, we need to
-		 * check did_readaround, as this is an inner loop.
-		 */
-		if (!did_readaround) {
-			ret = VM_FAULT_MAJOR;
-			count_vm_event(PGMAJFAULT);
-		}
-		did_readaround = 1;
-		ra_pages = max_sane_readahead(file->f_ra.ra_pages);
-		if (ra_pages) {
-			pgoff_t start = 0;
-
-			if (vmf->pgoff > ra_pages / 2)
-				start = vmf->pgoff - ra_pages / 2;
-			do_page_cache_readahead(mapping, file, start, ra_pages);
+		/* Did it get truncated? */
+		if (unlikely(page->mapping != mapping)) {
+			unlock_page(page);
+			put_page(page);
+			goto no_cached_page;
 		}
-		page = find_lock_page(mapping, vmf->pgoff);
+	} else {
+		/* No page in the page cache at all */
+		do_sync_mmap_readahead(vma, ra, file, offset);
+		count_vm_event(PGMAJFAULT);
+		ret = VM_FAULT_MAJOR;
+retry_find:
+		page = find_lock_page(mapping, offset);
 		if (!page)
 			goto no_cached_page;
 	}
 
-	if (!did_readaround)
-		ra->mmap_miss--;
-
 	/*
 	 * We have a locked page in the page cache, now we need to check
 	 * that it's up-to-date. If not, it is going to be due to an error.
@@ -1555,18 +1584,18 @@ retry_find:
 	if (unlikely(!PageUptodate(page)))
 		goto page_not_uptodate;
 
-	/* Must recheck i_size under page lock */
+	/*
+	 * Found the page and have a reference on it.
+	 * We must recheck i_size under page lock.
+	 */
 	size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-	if (unlikely(vmf->pgoff >= size)) {
+	if (unlikely(offset >= size)) {
 		unlock_page(page);
 		page_cache_release(page);
 		return VM_FAULT_SIGBUS;
 	}
 
-	/*
-	 * Found the page and have a reference on it.
-	 */
-	ra->prev_pos = (loff_t)page->index << PAGE_CACHE_SHIFT;
+	ra->prev_pos = (loff_t)offset << PAGE_CACHE_SHIFT;
 	vmf->page = page;
 	return ret | VM_FAULT_LOCKED;
 
@@ -1575,7 +1604,7 @@ no_cached_page:
 	 * We're only likely to ever get here if MADV_RANDOM is in
 	 * effect.
 	 */
-	error = page_cache_read(file, vmf->pgoff);
+	error = page_cache_read(file, offset);
 
 	/*
 	 * The page we want has now been added to the page cache.
@@ -1595,12 +1624,6 @@ no_cached_page:
 	return VM_FAULT_SIGBUS;
 
 page_not_uptodate:
-	/* IO error path */
-	if (!did_readaround) {
-		ret = VM_FAULT_MAJOR;
-		count_vm_event(PGMAJFAULT);
-	}
-
 	/*
 	 * Umm, take care of errors if the page isn't up-to-date.
 	 * Try to re-read it _once_. We do this synchronously,
diff --git a/mm/highmem.c b/mm/highmem.c
index 68eb1d9b63f..25878cc49da 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -26,7 +26,6 @@
 #include <linux/init.h>
 #include <linux/hash.h>
 #include <linux/highmem.h>
-#include <linux/blktrace_api.h>
 #include <asm/tlbflush.h>
 
 /*
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index e83ad2c9228..a56e6f3ce97 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -578,41 +578,6 @@ static void free_huge_page(struct page *page)
 		hugetlb_put_quota(mapping, 1);
 }
 
-/*
- * Increment or decrement surplus_huge_pages.  Keep node-specific counters
- * balanced by operating on them in a round-robin fashion.
- * Returns 1 if an adjustment was made.
- */
-static int adjust_pool_surplus(struct hstate *h, int delta)
-{
-	static int prev_nid;
-	int nid = prev_nid;
-	int ret = 0;
-
-	VM_BUG_ON(delta != -1 && delta != 1);
-	do {
-		nid = next_node(nid, node_online_map);
-		if (nid == MAX_NUMNODES)
-			nid = first_node(node_online_map);
-
-		/* To shrink on this node, there must be a surplus page */
-		if (delta < 0 && !h->surplus_huge_pages_node[nid])
-			continue;
-		/* Surplus cannot exceed the total number of pages */
-		if (delta > 0 && h->surplus_huge_pages_node[nid] >=
-						h->nr_huge_pages_node[nid])
-			continue;
-
-		h->surplus_huge_pages += delta;
-		h->surplus_huge_pages_node[nid] += delta;
-		ret = 1;
-		break;
-	} while (nid != prev_nid);
-
-	prev_nid = nid;
-	return ret;
-}
-
 static void prep_new_huge_page(struct hstate *h, struct page *page, int nid)
 {
 	set_compound_page_dtor(page, free_huge_page);
@@ -623,6 +588,34 @@ static void prep_new_huge_page(struct hstate *h, struct page *page, int nid)
 	put_page(page); /* free it into the hugepage allocator */
 }
 
+static void prep_compound_gigantic_page(struct page *page, unsigned long order)
+{
+	int i;
+	int nr_pages = 1 << order;
+	struct page *p = page + 1;
+
+	/* we rely on prep_new_huge_page to set the destructor */
+	set_compound_order(page, order);
+	__SetPageHead(page);
+	for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) {
+		__SetPageTail(p);
+		p->first_page = page;
+	}
+}
+
+int PageHuge(struct page *page)
+{
+	compound_page_dtor *dtor;
+
+	if (!PageCompound(page))
+		return 0;
+
+	page = compound_head(page);
+	dtor = get_compound_page_dtor(page);
+
+	return dtor == free_huge_page;
+}
+
 static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 {
 	struct page *page;
@@ -630,7 +623,7 @@ static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 	if (h->order >= MAX_ORDER)
 		return NULL;
 
-	page = alloc_pages_node(nid,
+	page = alloc_pages_exact_node(nid,
 		htlb_alloc_mask|__GFP_COMP|__GFP_THISNODE|
 						__GFP_REPEAT|__GFP_NOWARN,
 		huge_page_order(h));
@@ -649,7 +642,7 @@ static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
  * Use a helper variable to find the next node and then
  * copy it back to hugetlb_next_nid afterwards:
  * otherwise there's a window in which a racer might
- * pass invalid nid MAX_NUMNODES to alloc_pages_node.
+ * pass invalid nid MAX_NUMNODES to alloc_pages_exact_node.
  * But we don't need to use a spin_lock here: it really
  * doesn't matter if occasionally a racer chooses the
  * same nid as we do.  Move nid forward in the mask even
@@ -875,7 +868,7 @@ static void return_unused_surplus_pages(struct hstate *h,
 	 * can no longer free unreserved surplus pages. This occurs when
 	 * the nodes with surplus pages have no free pages.
 	 */
-	unsigned long remaining_iterations = num_online_nodes();
+	unsigned long remaining_iterations = nr_online_nodes;
 
 	/* Uncommit the reservation */
 	h->resv_huge_pages -= unused_resv_pages;
@@ -904,7 +897,7 @@ static void return_unused_surplus_pages(struct hstate *h,
 			h->surplus_huge_pages--;
 			h->surplus_huge_pages_node[nid]--;
 			nr_pages--;
-			remaining_iterations = num_online_nodes();
+			remaining_iterations = nr_online_nodes;
 		}
 	}
 }
@@ -1140,6 +1133,41 @@ static inline void try_to_free_low(struct hstate *h, unsigned long count)
 }
 #endif
 
+/*
+ * Increment or decrement surplus_huge_pages.  Keep node-specific counters
+ * balanced by operating on them in a round-robin fashion.
+ * Returns 1 if an adjustment was made.
+ */
+static int adjust_pool_surplus(struct hstate *h, int delta)
+{
+	static int prev_nid;
+	int nid = prev_nid;
+	int ret = 0;
+
+	VM_BUG_ON(delta != -1 && delta != 1);
+	do {
+		nid = next_node(nid, node_online_map);
+		if (nid == MAX_NUMNODES)
+			nid = first_node(node_online_map);
+
+		/* To shrink on this node, there must be a surplus page */
+		if (delta < 0 && !h->surplus_huge_pages_node[nid])
+			continue;
+		/* Surplus cannot exceed the total number of pages */
+		if (delta > 0 && h->surplus_huge_pages_node[nid] >=
+						h->nr_huge_pages_node[nid])
+			continue;
+
+		h->surplus_huge_pages += delta;
+		h->surplus_huge_pages_node[nid] += delta;
+		ret = 1;
+		break;
+	} while (nid != prev_nid);
+
+	prev_nid = nid;
+	return ret;
+}
+
 #define persistent_huge_pages(h) (h->nr_huge_pages - h->surplus_huge_pages)
 static unsigned long set_max_huge_pages(struct hstate *h, unsigned long count)
 {
diff --git a/mm/init-mm.c b/mm/init-mm.c
new file mode 100644
index 00000000000..57aba0da966
--- /dev/null
+++ b/mm/init-mm.c
@@ -0,0 +1,20 @@
+#include <linux/mm_types.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/cpumask.h>
+
+#include <asm/atomic.h>
+#include <asm/pgtable.h>
+
+struct mm_struct init_mm = {
+	.mm_rb		= RB_ROOT,
+	.pgd		= swapper_pg_dir,
+	.mm_users	= ATOMIC_INIT(2),
+	.mm_count	= ATOMIC_INIT(1),
+	.mmap_sem	= __RWSEM_INITIALIZER(init_mm.mmap_sem),
+	.page_table_lock =  __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock),
+	.mmlist		= LIST_HEAD_INIT(init_mm.mmlist),
+	.cpu_vm_mask	= CPU_MASK_ALL,
+};
diff --git a/mm/internal.h b/mm/internal.h
index 987bb03fbdd..f290c4db528 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -16,9 +16,6 @@
 void free_pgtables(struct mmu_gather *tlb, struct vm_area_struct *start_vma,
 		unsigned long floor, unsigned long ceiling);
 
-extern void prep_compound_page(struct page *page, unsigned long order);
-extern void prep_compound_gigantic_page(struct page *page, unsigned long order);
-
 static inline void set_page_count(struct page *page, int v)
 {
 	atomic_set(&page->_count, v);
@@ -51,6 +48,8 @@ extern void putback_lru_page(struct page *page);
  */
 extern unsigned long highest_memmap_pfn;
 extern void __free_pages_bootmem(struct page *page, unsigned int order);
+extern void prep_compound_page(struct page *page, unsigned long order);
+
 
 /*
  * function for dealing with page's order in buddy system.
@@ -74,7 +73,6 @@ static inline void munlock_vma_pages_all(struct vm_area_struct *vma)
 }
 #endif
 
-#ifdef CONFIG_UNEVICTABLE_LRU
 /*
  * unevictable_migrate_page() called only from migrate_page_copy() to
  * migrate unevictable flag to new page.
@@ -86,11 +84,6 @@ static inline void unevictable_migrate_page(struct page *new, struct page *old)
 	if (TestClearPageUnevictable(old))
 		SetPageUnevictable(new);
 }
-#else
-static inline void unevictable_migrate_page(struct page *new, struct page *old)
-{
-}
-#endif
 
 #ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
 /*
@@ -150,23 +143,6 @@ static inline void mlock_migrate_page(struct page *newpage, struct page *page)
 	}
 }
 
-/*
- * free_page_mlock() -- clean up attempts to free and mlocked() page.
- * Page should not be on lru, so no need to fix that up.
- * free_pages_check() will verify...
- */
-static inline void free_page_mlock(struct page *page)
-{
-	if (unlikely(TestClearPageMlocked(page))) {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		__dec_zone_page_state(page, NR_MLOCK);
-		__count_vm_event(UNEVICTABLE_MLOCKFREED);
-		local_irq_restore(flags);
-	}
-}
-
 #else /* CONFIG_HAVE_MLOCKED_PAGE_BIT */
 static inline int is_mlocked_vma(struct vm_area_struct *v, struct page *p)
 {
@@ -175,7 +151,6 @@ static inline int is_mlocked_vma(struct vm_area_struct *v, struct page *p)
 static inline void clear_page_mlock(struct page *page) { }
 static inline void mlock_vma_page(struct page *page) { }
 static inline void mlock_migrate_page(struct page *new, struct page *old) { }
-static inline void free_page_mlock(struct page *page) { }
 
 #endif /* CONFIG_HAVE_MLOCKED_PAGE_BIT */
 
@@ -284,4 +259,8 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 		     unsigned long start, int len, int flags,
 		     struct page **pages, struct vm_area_struct **vmas);
 
+#define ZONE_RECLAIM_NOSCAN	-2
+#define ZONE_RECLAIM_FULL	-1
+#define ZONE_RECLAIM_SOME	0
+#define ZONE_RECLAIM_SUCCESS	1
 #endif
diff --git a/mm/kmemcheck.c b/mm/kmemcheck.c
new file mode 100644
index 00000000000..fd814fd6131
--- /dev/null
+++ b/mm/kmemcheck.c
@@ -0,0 +1,122 @@
+#include <linux/gfp.h>
+#include <linux/mm_types.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kmemcheck.h>
+
+void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node)
+{
+	struct page *shadow;
+	int pages;
+	int i;
+
+	pages = 1 << order;
+
+	/*
+	 * With kmemcheck enabled, we need to allocate a memory area for the
+	 * shadow bits as well.
+	 */
+	shadow = alloc_pages_node(node, flags | __GFP_NOTRACK, order);
+	if (!shadow) {
+		if (printk_ratelimit())
+			printk(KERN_ERR "kmemcheck: failed to allocate "
+				"shadow bitmap\n");
+		return;
+	}
+
+	for(i = 0; i < pages; ++i)
+		page[i].shadow = page_address(&shadow[i]);
+
+	/*
+	 * Mark it as non-present for the MMU so that our accesses to
+	 * this memory will trigger a page fault and let us analyze
+	 * the memory accesses.
+	 */
+	kmemcheck_hide_pages(page, pages);
+}
+
+void kmemcheck_free_shadow(struct page *page, int order)
+{
+	struct page *shadow;
+	int pages;
+	int i;
+
+	if (!kmemcheck_page_is_tracked(page))
+		return;
+
+	pages = 1 << order;
+
+	kmemcheck_show_pages(page, pages);
+
+	shadow = virt_to_page(page[0].shadow);
+
+	for(i = 0; i < pages; ++i)
+		page[i].shadow = NULL;
+
+	__free_pages(shadow, order);
+}
+
+void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
+			  size_t size)
+{
+	/*
+	 * Has already been memset(), which initializes the shadow for us
+	 * as well.
+	 */
+	if (gfpflags & __GFP_ZERO)
+		return;
+
+	/* No need to initialize the shadow of a non-tracked slab. */
+	if (s->flags & SLAB_NOTRACK)
+		return;
+
+	if (!kmemcheck_enabled || gfpflags & __GFP_NOTRACK) {
+		/*
+		 * Allow notracked objects to be allocated from
+		 * tracked caches. Note however that these objects
+		 * will still get page faults on access, they just
+		 * won't ever be flagged as uninitialized. If page
+		 * faults are not acceptable, the slab cache itself
+		 * should be marked NOTRACK.
+		 */
+		kmemcheck_mark_initialized(object, size);
+	} else if (!s->ctor) {
+		/*
+		 * New objects should be marked uninitialized before
+		 * they're returned to the called.
+		 */
+		kmemcheck_mark_uninitialized(object, size);
+	}
+}
+
+void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size)
+{
+	/* TODO: RCU freeing is unsupported for now; hide false positives. */
+	if (!s->ctor && !(s->flags & SLAB_DESTROY_BY_RCU))
+		kmemcheck_mark_freed(object, size);
+}
+
+void kmemcheck_pagealloc_alloc(struct page *page, unsigned int order,
+			       gfp_t gfpflags)
+{
+	int pages;
+
+	if (gfpflags & (__GFP_HIGHMEM | __GFP_NOTRACK))
+		return;
+
+	pages = 1 << order;
+
+	/*
+	 * NOTE: We choose to track GFP_ZERO pages too; in fact, they
+	 * can become uninitialized by copying uninitialized memory
+	 * into them.
+	 */
+
+	/* XXX: Can use zone->node for node? */
+	kmemcheck_alloc_shadow(page, order, gfpflags, -1);
+
+	if (gfpflags & __GFP_ZERO)
+		kmemcheck_mark_initialized_pages(page, pages);
+	else
+		kmemcheck_mark_uninitialized_pages(page, pages);
+}
diff --git a/mm/madvise.c b/mm/madvise.c
index b9ce574827c..76eb4193acd 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -123,8 +123,7 @@ static long madvise_willneed(struct vm_area_struct * vma,
 		end = vma->vm_end;
 	end = ((end - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
 
-	force_page_cache_readahead(file->f_mapping,
-			file, start, max_sane_readahead(end - start));
+	force_page_cache_readahead(file->f_mapping, file, start, end - start);
 	return 0;
 }
 
@@ -239,12 +238,30 @@ madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev,
 		break;
 
 	default:
-		error = -EINVAL;
+		BUG();
 		break;
 	}
 	return error;
 }
 
+static int
+madvise_behavior_valid(int behavior)
+{
+	switch (behavior) {
+	case MADV_DOFORK:
+	case MADV_DONTFORK:
+	case MADV_NORMAL:
+	case MADV_SEQUENTIAL:
+	case MADV_RANDOM:
+	case MADV_REMOVE:
+	case MADV_WILLNEED:
+	case MADV_DONTNEED:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
 /*
  * The madvise(2) system call.
  *
@@ -290,6 +307,9 @@ SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
 	int write;
 	size_t len;
 
+	if (!madvise_behavior_valid(behavior))
+		return error;
+
 	write = madvise_need_mmap_write(behavior);
 	if (write)
 		down_write(&current->mm->mmap_sem);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 78eb8552818..70db6e0a5ee 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -570,6 +570,17 @@ int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
 	return 0;
 }
 
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
+{
+	unsigned long active;
+	unsigned long inactive;
+
+	inactive = mem_cgroup_get_local_zonestat(memcg, LRU_INACTIVE_FILE);
+	active = mem_cgroup_get_local_zonestat(memcg, LRU_ACTIVE_FILE);
+
+	return (active > inactive);
+}
+
 unsigned long mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg,
 				       struct zone *zone,
 				       enum lru_list lru)
diff --git a/mm/memory.c b/mm/memory.c
index 4126dd16778..d5d1653d60a 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1360,6 +1360,56 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 	return i;
 }
 
+/**
+ * get_user_pages() - pin user pages in memory
+ * @tsk:	task_struct of target task
+ * @mm:		mm_struct of target mm
+ * @start:	starting user address
+ * @len:	number of pages from start to pin
+ * @write:	whether pages will be written to by the caller
+ * @force:	whether to force write access even if user mapping is
+ *		readonly. This will result in the page being COWed even
+ *		in MAP_SHARED mappings. You do not want this.
+ * @pages:	array that receives pointers to the pages pinned.
+ *		Should be at least nr_pages long. Or NULL, if caller
+ *		only intends to ensure the pages are faulted in.
+ * @vmas:	array of pointers to vmas corresponding to each page.
+ *		Or NULL if the caller does not require them.
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If len is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno. Each page returned must be released
+ * with a put_page() call when it is finished with. vmas will only
+ * remain valid while mmap_sem is held.
+ *
+ * Must be called with mmap_sem held for read or write.
+ *
+ * get_user_pages walks a process's page tables and takes a reference to
+ * each struct page that each user address corresponds to at a given
+ * instant. That is, it takes the page that would be accessed if a user
+ * thread accesses the given user virtual address at that instant.
+ *
+ * This does not guarantee that the page exists in the user mappings when
+ * get_user_pages returns, and there may even be a completely different
+ * page there in some cases (eg. if mmapped pagecache has been invalidated
+ * and subsequently re faulted). However it does guarantee that the page
+ * won't be freed completely. And mostly callers simply care that the page
+ * contains data that was valid *at some point in time*. Typically, an IO
+ * or similar operation cannot guarantee anything stronger anyway because
+ * locks can't be held over the syscall boundary.
+ *
+ * If write=0, the page must not be written to. If the page is written to,
+ * set_page_dirty (or set_page_dirty_lock, as appropriate) must be called
+ * after the page is finished with, and before put_page is called.
+ *
+ * get_user_pages is typically used for fewer-copy IO operations, to get a
+ * handle on the memory by some means other than accesses via the user virtual
+ * addresses. The pages may be submitted for DMA to devices or accessed via
+ * their kernel linear mapping (via the kmap APIs). Care should be taken to
+ * use the correct cache flushing APIs.
+ *
+ * See also get_user_pages_fast, for performance critical applications.
+ */
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 		unsigned long start, int len, int write, int force,
 		struct page **pages, struct vm_area_struct **vmas)
@@ -3053,22 +3103,13 @@ int in_gate_area_no_task(unsigned long addr)
 
 #endif	/* __HAVE_ARCH_GATE_AREA */
 
-#ifdef CONFIG_HAVE_IOREMAP_PROT
-int follow_phys(struct vm_area_struct *vma,
-		unsigned long address, unsigned int flags,
-		unsigned long *prot, resource_size_t *phys)
+static int follow_pte(struct mm_struct *mm, unsigned long address,
+		pte_t **ptepp, spinlock_t **ptlp)
 {
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
-	pte_t *ptep, pte;
-	spinlock_t *ptl;
-	resource_size_t phys_addr = 0;
-	struct mm_struct *mm = vma->vm_mm;
-	int ret = -EINVAL;
-
-	if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
-		goto out;
+	pte_t *ptep;
 
 	pgd = pgd_offset(mm, address);
 	if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
@@ -3086,22 +3127,71 @@ int follow_phys(struct vm_area_struct *vma,
 	if (pmd_huge(*pmd))
 		goto out;
 
-	ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
+	ptep = pte_offset_map_lock(mm, pmd, address, ptlp);
 	if (!ptep)
 		goto out;
+	if (!pte_present(*ptep))
+		goto unlock;
+	*ptepp = ptep;
+	return 0;
+unlock:
+	pte_unmap_unlock(ptep, *ptlp);
+out:
+	return -EINVAL;
+}
 
+/**
+ * follow_pfn - look up PFN at a user virtual address
+ * @vma: memory mapping
+ * @address: user virtual address
+ * @pfn: location to store found PFN
+ *
+ * Only IO mappings and raw PFN mappings are allowed.
+ *
+ * Returns zero and the pfn at @pfn on success, -ve otherwise.
+ */
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+	unsigned long *pfn)
+{
+	int ret = -EINVAL;
+	spinlock_t *ptl;
+	pte_t *ptep;
+
+	if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+		return ret;
+
+	ret = follow_pte(vma->vm_mm, address, &ptep, &ptl);
+	if (ret)
+		return ret;
+	*pfn = pte_pfn(*ptep);
+	pte_unmap_unlock(ptep, ptl);
+	return 0;
+}
+EXPORT_SYMBOL(follow_pfn);
+
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+int follow_phys(struct vm_area_struct *vma,
+		unsigned long address, unsigned int flags,
+		unsigned long *prot, resource_size_t *phys)
+{
+	int ret = -EINVAL;
+	pte_t *ptep, pte;
+	spinlock_t *ptl;
+
+	if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+		goto out;
+
+	if (follow_pte(vma->vm_mm, address, &ptep, &ptl))
+		goto out;
 	pte = *ptep;
-	if (!pte_present(pte))
-		goto unlock;
+
 	if ((flags & FOLL_WRITE) && !pte_write(pte))
 		goto unlock;
-	phys_addr = pte_pfn(pte);
-	phys_addr <<= PAGE_SHIFT; /* Shift here to avoid overflow on PAE */
 
 	*prot = pgprot_val(pte_pgprot(pte));
-	*phys = phys_addr;
-	ret = 0;
+	*phys = (resource_size_t)pte_pfn(pte) << PAGE_SHIFT;
 
+	ret = 0;
 unlock:
 	pte_unmap_unlock(ptep, ptl);
 out:
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index c083cf5fd6d..e4412a676c8 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -422,7 +422,8 @@ int online_pages(unsigned long pfn, unsigned long nr_pages)
 	zone->present_pages += onlined_pages;
 	zone->zone_pgdat->node_present_pages += onlined_pages;
 
-	setup_per_zone_pages_min();
+	setup_per_zone_wmarks();
+	calculate_zone_inactive_ratio(zone);
 	if (onlined_pages) {
 		kswapd_run(zone_to_nid(zone));
 		node_set_state(zone_to_nid(zone), N_HIGH_MEMORY);
@@ -832,6 +833,9 @@ repeat:
 	totalram_pages -= offlined_pages;
 	num_physpages -= offlined_pages;
 
+	setup_per_zone_wmarks();
+	calculate_zone_inactive_ratio(zone);
+
 	vm_total_pages = nr_free_pagecache_pages();
 	writeback_set_ratelimit();
 
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 3eb4a6fdc04..e08e2c4da63 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -182,13 +182,54 @@ static int mpol_new_bind(struct mempolicy *pol, const nodemask_t *nodes)
 	return 0;
 }
 
-/* Create a new policy */
+/*
+ * mpol_set_nodemask is called after mpol_new() to set up the nodemask, if
+ * any, for the new policy.  mpol_new() has already validated the nodes
+ * parameter with respect to the policy mode and flags.  But, we need to
+ * handle an empty nodemask with MPOL_PREFERRED here.
+ *
+ * Must be called holding task's alloc_lock to protect task's mems_allowed
+ * and mempolicy.  May also be called holding the mmap_semaphore for write.
+ */
+static int mpol_set_nodemask(struct mempolicy *pol, const nodemask_t *nodes)
+{
+	nodemask_t cpuset_context_nmask;
+	int ret;
+
+	/* if mode is MPOL_DEFAULT, pol is NULL. This is right. */
+	if (pol == NULL)
+		return 0;
+
+	VM_BUG_ON(!nodes);
+	if (pol->mode == MPOL_PREFERRED && nodes_empty(*nodes))
+		nodes = NULL;	/* explicit local allocation */
+	else {
+		if (pol->flags & MPOL_F_RELATIVE_NODES)
+			mpol_relative_nodemask(&cpuset_context_nmask, nodes,
+					       &cpuset_current_mems_allowed);
+		else
+			nodes_and(cpuset_context_nmask, *nodes,
+				  cpuset_current_mems_allowed);
+		if (mpol_store_user_nodemask(pol))
+			pol->w.user_nodemask = *nodes;
+		else
+			pol->w.cpuset_mems_allowed =
+						cpuset_current_mems_allowed;
+	}
+
+	ret = mpol_ops[pol->mode].create(pol,
+				nodes ? &cpuset_context_nmask : NULL);
+	return ret;
+}
+
+/*
+ * This function just creates a new policy, does some check and simple
+ * initialization. You must invoke mpol_set_nodemask() to set nodes.
+ */
 static struct mempolicy *mpol_new(unsigned short mode, unsigned short flags,
 				  nodemask_t *nodes)
 {
 	struct mempolicy *policy;
-	nodemask_t cpuset_context_nmask;
-	int ret;
 
 	pr_debug("setting mode %d flags %d nodes[0] %lx\n",
 		 mode, flags, nodes ? nodes_addr(*nodes)[0] : -1);
@@ -210,7 +251,6 @@ static struct mempolicy *mpol_new(unsigned short mode, unsigned short flags,
 			if (((flags & MPOL_F_STATIC_NODES) ||
 			     (flags & MPOL_F_RELATIVE_NODES)))
 				return ERR_PTR(-EINVAL);
-			nodes = NULL;	/* flag local alloc */
 		}
 	} else if (nodes_empty(*nodes))
 		return ERR_PTR(-EINVAL);
@@ -221,30 +261,6 @@ static struct mempolicy *mpol_new(unsigned short mode, unsigned short flags,
 	policy->mode = mode;
 	policy->flags = flags;
 
-	if (nodes) {
-		/*
-		 * cpuset related setup doesn't apply to local allocation
-		 */
-		cpuset_update_task_memory_state();
-		if (flags & MPOL_F_RELATIVE_NODES)
-			mpol_relative_nodemask(&cpuset_context_nmask, nodes,
-					       &cpuset_current_mems_allowed);
-		else
-			nodes_and(cpuset_context_nmask, *nodes,
-				  cpuset_current_mems_allowed);
-		if (mpol_store_user_nodemask(policy))
-			policy->w.user_nodemask = *nodes;
-		else
-			policy->w.cpuset_mems_allowed =
-						cpuset_mems_allowed(current);
-	}
-
-	ret = mpol_ops[mode].create(policy,
-				nodes ? &cpuset_context_nmask : NULL);
-	if (ret < 0) {
-		kmem_cache_free(policy_cache, policy);
-		return ERR_PTR(ret);
-	}
 	return policy;
 }
 
@@ -324,6 +340,8 @@ static void mpol_rebind_policy(struct mempolicy *pol,
 /*
  * Wrapper for mpol_rebind_policy() that just requires task
  * pointer, and updates task mempolicy.
+ *
+ * Called with task's alloc_lock held.
  */
 
 void mpol_rebind_task(struct task_struct *tsk, const nodemask_t *new)
@@ -600,8 +618,9 @@ static void mpol_set_task_struct_flag(void)
 static long do_set_mempolicy(unsigned short mode, unsigned short flags,
 			     nodemask_t *nodes)
 {
-	struct mempolicy *new;
+	struct mempolicy *new, *old;
 	struct mm_struct *mm = current->mm;
+	int ret;
 
 	new = mpol_new(mode, flags, nodes);
 	if (IS_ERR(new))
@@ -615,20 +634,33 @@ static long do_set_mempolicy(unsigned short mode, unsigned short flags,
 	 */
 	if (mm)
 		down_write(&mm->mmap_sem);
-	mpol_put(current->mempolicy);
+	task_lock(current);
+	ret = mpol_set_nodemask(new, nodes);
+	if (ret) {
+		task_unlock(current);
+		if (mm)
+			up_write(&mm->mmap_sem);
+		mpol_put(new);
+		return ret;
+	}
+	old = current->mempolicy;
 	current->mempolicy = new;
 	mpol_set_task_struct_flag();
 	if (new && new->mode == MPOL_INTERLEAVE &&
 	    nodes_weight(new->v.nodes))
 		current->il_next = first_node(new->v.nodes);
+	task_unlock(current);
 	if (mm)
 		up_write(&mm->mmap_sem);
 
+	mpol_put(old);
 	return 0;
 }
 
 /*
  * Return nodemask for policy for get_mempolicy() query
+ *
+ * Called with task's alloc_lock held
  */
 static void get_policy_nodemask(struct mempolicy *p, nodemask_t *nodes)
 {
@@ -674,7 +706,6 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
 	struct vm_area_struct *vma = NULL;
 	struct mempolicy *pol = current->mempolicy;
 
-	cpuset_update_task_memory_state();
 	if (flags &
 		~(unsigned long)(MPOL_F_NODE|MPOL_F_ADDR|MPOL_F_MEMS_ALLOWED))
 		return -EINVAL;
@@ -683,7 +714,9 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
 		if (flags & (MPOL_F_NODE|MPOL_F_ADDR))
 			return -EINVAL;
 		*policy = 0;	/* just so it's initialized */
+		task_lock(current);
 		*nmask  = cpuset_current_mems_allowed;
+		task_unlock(current);
 		return 0;
 	}
 
@@ -738,8 +771,11 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
 	}
 
 	err = 0;
-	if (nmask)
+	if (nmask) {
+		task_lock(current);
 		get_policy_nodemask(pol, nmask);
+		task_unlock(current);
+	}
 
  out:
 	mpol_cond_put(pol);
@@ -767,7 +803,7 @@ static void migrate_page_add(struct page *page, struct list_head *pagelist,
 
 static struct page *new_node_page(struct page *page, unsigned long node, int **x)
 {
-	return alloc_pages_node(node, GFP_HIGHUSER_MOVABLE, 0);
+	return alloc_pages_exact_node(node, GFP_HIGHUSER_MOVABLE, 0);
 }
 
 /*
@@ -979,6 +1015,14 @@ static long do_mbind(unsigned long start, unsigned long len,
 			return err;
 	}
 	down_write(&mm->mmap_sem);
+	task_lock(current);
+	err = mpol_set_nodemask(new, nmask);
+	task_unlock(current);
+	if (err) {
+		up_write(&mm->mmap_sem);
+		mpol_put(new);
+		return err;
+	}
 	vma = check_range(mm, start, end, nmask,
 			  flags | MPOL_MF_INVERT, &pagelist);
 
@@ -1545,8 +1589,6 @@ alloc_page_vma(gfp_t gfp, struct vm_area_struct *vma, unsigned long addr)
 	struct mempolicy *pol = get_vma_policy(current, vma, addr);
 	struct zonelist *zl;
 
-	cpuset_update_task_memory_state();
-
 	if (unlikely(pol->mode == MPOL_INTERLEAVE)) {
 		unsigned nid;
 
@@ -1593,8 +1635,6 @@ struct page *alloc_pages_current(gfp_t gfp, unsigned order)
 {
 	struct mempolicy *pol = current->mempolicy;
 
-	if ((gfp & __GFP_WAIT) && !in_interrupt())
-		cpuset_update_task_memory_state();
 	if (!pol || in_interrupt() || (gfp & __GFP_THISNODE))
 		pol = &default_policy;
 
@@ -1854,6 +1894,8 @@ restart:
  */
 void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
 {
+	int ret;
+
 	sp->root = RB_ROOT;		/* empty tree == default mempolicy */
 	spin_lock_init(&sp->lock);
 
@@ -1863,9 +1905,19 @@ void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
 
 		/* contextualize the tmpfs mount point mempolicy */
 		new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
-		mpol_put(mpol);	/* drop our ref on sb mpol */
-		if (IS_ERR(new))
+		if (IS_ERR(new)) {
+			mpol_put(mpol);	/* drop our ref on sb mpol */
 			return;		/* no valid nodemask intersection */
+		}
+
+		task_lock(current);
+		ret = mpol_set_nodemask(new, &mpol->w.user_nodemask);
+		task_unlock(current);
+		mpol_put(mpol);	/* drop our ref on sb mpol */
+		if (ret) {
+			mpol_put(new);
+			return;
+		}
 
 		/* Create pseudo-vma that contains just the policy */
 		memset(&pvma, 0, sizeof(struct vm_area_struct));
@@ -2086,8 +2138,19 @@ int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context)
 	new = mpol_new(mode, mode_flags, &nodes);
 	if (IS_ERR(new))
 		err = 1;
-	else if (no_context)
-		new->w.user_nodemask = nodes;	/* save for contextualization */
+	else {
+		int ret;
+
+		task_lock(current);
+		ret = mpol_set_nodemask(new, &nodes);
+		task_unlock(current);
+		if (ret)
+			err = 1;
+		else if (no_context) {
+			/* save for contextualization */
+			new->w.user_nodemask = nodes;
+		}
+	}
 
 out:
 	/* Restore string for error message */
diff --git a/mm/migrate.c b/mm/migrate.c
index 068655d8f88..939888f9dda 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -802,7 +802,7 @@ static struct page *new_page_node(struct page *p, unsigned long private,
 
 	*result = &pm->status;
 
-	return alloc_pages_node(pm->node,
+	return alloc_pages_exact_node(pm->node,
 				GFP_HIGHUSER_MOVABLE | GFP_THISNODE, 0);
 }
 
@@ -820,7 +820,6 @@ static int do_move_page_to_node_array(struct mm_struct *mm,
 	struct page_to_node *pp;
 	LIST_HEAD(pagelist);
 
-	migrate_prep();
 	down_read(&mm->mmap_sem);
 
 	/*
@@ -907,6 +906,9 @@ static int do_pages_move(struct mm_struct *mm, struct task_struct *task,
 	pm = (struct page_to_node *)__get_free_page(GFP_KERNEL);
 	if (!pm)
 		goto out;
+
+	migrate_prep();
+
 	/*
 	 * Store a chunk of page_to_node array in a page,
 	 * but keep the last one as a marker
diff --git a/mm/mlock.c b/mm/mlock.c
index ac130433c7d..45eb650b965 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -31,7 +31,6 @@ int can_do_mlock(void)
 }
 EXPORT_SYMBOL(can_do_mlock);
 
-#ifdef CONFIG_UNEVICTABLE_LRU
 /*
  * Mlocked pages are marked with PageMlocked() flag for efficient testing
  * in vmscan and, possibly, the fault path; and to support semi-accurate
@@ -261,27 +260,6 @@ static int __mlock_posix_error_return(long retval)
 	return retval;
 }
 
-#else /* CONFIG_UNEVICTABLE_LRU */
-
-/*
- * Just make pages present if VM_LOCKED.  No-op if unlocking.
- */
-static long __mlock_vma_pages_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end,
-				   int mlock)
-{
-	if (mlock && (vma->vm_flags & VM_LOCKED))
-		return make_pages_present(start, end);
-	return 0;
-}
-
-static inline int __mlock_posix_error_return(long retval)
-{
-	return 0;
-}
-
-#endif /* CONFIG_UNEVICTABLE_LRU */
-
 /**
  * mlock_vma_pages_range() - mlock pages in specified vma range.
  * @vma - the vma containing the specfied address range
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index a7b2460e922..175a67a78a9 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -58,6 +58,7 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 	unsigned long points, cpu_time, run_time;
 	struct mm_struct *mm;
 	struct task_struct *child;
+	int oom_adj;
 
 	task_lock(p);
 	mm = p->mm;
@@ -65,6 +66,11 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 		task_unlock(p);
 		return 0;
 	}
+	oom_adj = mm->oom_adj;
+	if (oom_adj == OOM_DISABLE) {
+		task_unlock(p);
+		return 0;
+	}
 
 	/*
 	 * The memory size of the process is the basis for the badness.
@@ -148,15 +154,15 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 		points /= 8;
 
 	/*
-	 * Adjust the score by oomkilladj.
+	 * Adjust the score by oom_adj.
 	 */
-	if (p->oomkilladj) {
-		if (p->oomkilladj > 0) {
+	if (oom_adj) {
+		if (oom_adj > 0) {
 			if (!points)
 				points = 1;
-			points <<= p->oomkilladj;
+			points <<= oom_adj;
 		} else
-			points >>= -(p->oomkilladj);
+			points >>= -(oom_adj);
 	}
 
 #ifdef DEBUG
@@ -251,11 +257,8 @@ static struct task_struct *select_bad_process(unsigned long *ppoints,
 			*ppoints = ULONG_MAX;
 		}
 
-		if (p->oomkilladj == OOM_DISABLE)
-			continue;
-
 		points = badness(p, uptime.tv_sec);
-		if (points > *ppoints || !chosen) {
+		if (points > *ppoints) {
 			chosen = p;
 			*ppoints = points;
 		}
@@ -304,8 +307,7 @@ static void dump_tasks(const struct mem_cgroup *mem)
 		}
 		printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d     %3d %s\n",
 		       p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
-		       get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
-		       p->comm);
+		       get_mm_rss(mm), (int)task_cpu(p), mm->oom_adj, p->comm);
 		task_unlock(p);
 	} while_each_thread(g, p);
 }
@@ -323,11 +325,8 @@ static void __oom_kill_task(struct task_struct *p, int verbose)
 		return;
 	}
 
-	if (!p->mm) {
-		WARN_ON(1);
-		printk(KERN_WARNING "tried to kill an mm-less task!\n");
+	if (!p->mm)
 		return;
-	}
 
 	if (verbose)
 		printk(KERN_ERR "Killed process %d (%s)\n",
@@ -349,28 +348,13 @@ static int oom_kill_task(struct task_struct *p)
 	struct mm_struct *mm;
 	struct task_struct *g, *q;
 
+	task_lock(p);
 	mm = p->mm;
-
-	/* WARNING: mm may not be dereferenced since we did not obtain its
-	 * value from get_task_mm(p).  This is OK since all we need to do is
-	 * compare mm to q->mm below.
-	 *
-	 * Furthermore, even if mm contains a non-NULL value, p->mm may
-	 * change to NULL at any time since we do not hold task_lock(p).
-	 * However, this is of no concern to us.
-	 */
-
-	if (mm == NULL)
+	if (!mm || mm->oom_adj == OOM_DISABLE) {
+		task_unlock(p);
 		return 1;
-
-	/*
-	 * Don't kill the process if any threads are set to OOM_DISABLE
-	 */
-	do_each_thread(g, q) {
-		if (q->mm == mm && q->oomkilladj == OOM_DISABLE)
-			return 1;
-	} while_each_thread(g, q);
-
+	}
+	task_unlock(p);
 	__oom_kill_task(p, 1);
 
 	/*
@@ -393,10 +377,11 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
 	struct task_struct *c;
 
 	if (printk_ratelimit()) {
-		printk(KERN_WARNING "%s invoked oom-killer: "
-			"gfp_mask=0x%x, order=%d, oomkilladj=%d\n",
-			current->comm, gfp_mask, order, current->oomkilladj);
 		task_lock(current);
+		printk(KERN_WARNING "%s invoked oom-killer: "
+			"gfp_mask=0x%x, order=%d, oom_adj=%d\n",
+			current->comm, gfp_mask, order,
+			current->mm ? current->mm->oom_adj : OOM_DISABLE);
 		cpuset_print_task_mems_allowed(current);
 		task_unlock(current);
 		dump_stack();
@@ -409,8 +394,9 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
 	/*
 	 * If the task is already exiting, don't alarm the sysadmin or kill
 	 * its children or threads, just set TIF_MEMDIE so it can die quickly
+	 * if its mm is still attached.
 	 */
-	if (p->flags & PF_EXITING) {
+	if (p->mm && (p->flags & PF_EXITING)) {
 		__oom_kill_task(p, 0);
 		return 0;
 	}
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index bb553c3e955..7b0dcea4935 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -265,18 +265,19 @@ static void bdi_writeout_fraction(struct backing_dev_info *bdi,
  * This avoids exceeding the total dirty_limit when the floating averages
  * fluctuate too quickly.
  */
-static void
-clip_bdi_dirty_limit(struct backing_dev_info *bdi, long dirty, long *pbdi_dirty)
+static void clip_bdi_dirty_limit(struct backing_dev_info *bdi,
+		unsigned long dirty, unsigned long *pbdi_dirty)
 {
-	long avail_dirty;
+	unsigned long avail_dirty;
 
-	avail_dirty = dirty -
-		(global_page_state(NR_FILE_DIRTY) +
+	avail_dirty = global_page_state(NR_FILE_DIRTY) +
 		 global_page_state(NR_WRITEBACK) +
 		 global_page_state(NR_UNSTABLE_NFS) +
-		 global_page_state(NR_WRITEBACK_TEMP));
+		 global_page_state(NR_WRITEBACK_TEMP);
 
-	if (avail_dirty < 0)
+	if (avail_dirty < dirty)
+		avail_dirty = dirty - avail_dirty;
+	else
 		avail_dirty = 0;
 
 	avail_dirty += bdi_stat(bdi, BDI_RECLAIMABLE) +
@@ -299,10 +300,10 @@ static inline void task_dirties_fraction(struct task_struct *tsk,
  *
  *   dirty -= (dirty/8) * p_{t}
  */
-static void task_dirty_limit(struct task_struct *tsk, long *pdirty)
+static void task_dirty_limit(struct task_struct *tsk, unsigned long *pdirty)
 {
 	long numerator, denominator;
-	long dirty = *pdirty;
+	unsigned long dirty = *pdirty;
 	u64 inv = dirty >> 3;
 
 	task_dirties_fraction(tsk, &numerator, &denominator);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 17d5f539a9a..a5f3c278c57 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -23,6 +23,7 @@
 #include <linux/bootmem.h>
 #include <linux/compiler.h>
 #include <linux/kernel.h>
+#include <linux/kmemcheck.h>
 #include <linux/module.h>
 #include <linux/suspend.h>
 #include <linux/pagevec.h>
@@ -161,17 +162,25 @@ static unsigned long __meminitdata dma_reserve;
 
 #if MAX_NUMNODES > 1
 int nr_node_ids __read_mostly = MAX_NUMNODES;
+int nr_online_nodes __read_mostly = 1;
 EXPORT_SYMBOL(nr_node_ids);
+EXPORT_SYMBOL(nr_online_nodes);
 #endif
 
 int page_group_by_mobility_disabled __read_mostly;
 
 static void set_pageblock_migratetype(struct page *page, int migratetype)
 {
+
+	if (unlikely(page_group_by_mobility_disabled))
+		migratetype = MIGRATE_UNMOVABLE;
+
 	set_pageblock_flags_group(page, (unsigned long)migratetype,
 					PB_migrate, PB_migrate_end);
 }
 
+bool oom_killer_disabled __read_mostly;
+
 #ifdef CONFIG_DEBUG_VM
 static int page_outside_zone_boundaries(struct zone *zone, struct page *page)
 {
@@ -294,23 +303,6 @@ void prep_compound_page(struct page *page, unsigned long order)
 	}
 }
 
-#ifdef CONFIG_HUGETLBFS
-void prep_compound_gigantic_page(struct page *page, unsigned long order)
-{
-	int i;
-	int nr_pages = 1 << order;
-	struct page *p = page + 1;
-
-	set_compound_page_dtor(page, free_compound_page);
-	set_compound_order(page, order);
-	__SetPageHead(page);
-	for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) {
-		__SetPageTail(p);
-		p->first_page = page;
-	}
-}
-#endif
-
 static int destroy_compound_page(struct page *page, unsigned long order)
 {
 	int i;
@@ -417,7 +409,7 @@ static inline int page_is_buddy(struct page *page, struct page *buddy,
 		return 0;
 
 	if (PageBuddy(buddy) && page_order(buddy) == order) {
-		BUG_ON(page_count(buddy) != 0);
+		VM_BUG_ON(page_count(buddy) != 0);
 		return 1;
 	}
 	return 0;
@@ -448,22 +440,22 @@ static inline int page_is_buddy(struct page *page, struct page *buddy,
  */
 
 static inline void __free_one_page(struct page *page,
-		struct zone *zone, unsigned int order)
+		struct zone *zone, unsigned int order,
+		int migratetype)
 {
 	unsigned long page_idx;
-	int order_size = 1 << order;
-	int migratetype = get_pageblock_migratetype(page);
 
 	if (unlikely(PageCompound(page)))
 		if (unlikely(destroy_compound_page(page, order)))
 			return;
 
+	VM_BUG_ON(migratetype == -1);
+
 	page_idx = page_to_pfn(page) & ((1 << MAX_ORDER) - 1);
 
-	VM_BUG_ON(page_idx & (order_size - 1));
+	VM_BUG_ON(page_idx & ((1 << order) - 1));
 	VM_BUG_ON(bad_range(zone, page));
 
-	__mod_zone_page_state(zone, NR_FREE_PAGES, order_size);
 	while (order < MAX_ORDER-1) {
 		unsigned long combined_idx;
 		struct page *buddy;
@@ -487,12 +479,27 @@ static inline void __free_one_page(struct page *page,
 	zone->free_area[order].nr_free++;
 }
 
+#ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
+/*
+ * free_page_mlock() -- clean up attempts to free and mlocked() page.
+ * Page should not be on lru, so no need to fix that up.
+ * free_pages_check() will verify...
+ */
+static inline void free_page_mlock(struct page *page)
+{
+	__ClearPageMlocked(page);
+	__dec_zone_page_state(page, NR_MLOCK);
+	__count_vm_event(UNEVICTABLE_MLOCKFREED);
+}
+#else
+static void free_page_mlock(struct page *page) { }
+#endif
+
 static inline int free_pages_check(struct page *page)
 {
-	free_page_mlock(page);
 	if (unlikely(page_mapcount(page) |
 		(page->mapping != NULL)  |
-		(page_count(page) != 0)  |
+		(atomic_read(&page->_count) != 0) |
 		(page->flags & PAGE_FLAGS_CHECK_AT_FREE))) {
 		bad_page(page);
 		return 1;
@@ -519,6 +526,8 @@ static void free_pages_bulk(struct zone *zone, int count,
 	spin_lock(&zone->lock);
 	zone_clear_flag(zone, ZONE_ALL_UNRECLAIMABLE);
 	zone->pages_scanned = 0;
+
+	__mod_zone_page_state(zone, NR_FREE_PAGES, count << order);
 	while (count--) {
 		struct page *page;
 
@@ -526,17 +535,20 @@ static void free_pages_bulk(struct zone *zone, int count,
 		page = list_entry(list->prev, struct page, lru);
 		/* have to delete it as __free_one_page list manipulates */
 		list_del(&page->lru);
-		__free_one_page(page, zone, order);
+		__free_one_page(page, zone, order, page_private(page));
 	}
 	spin_unlock(&zone->lock);
 }
 
-static void free_one_page(struct zone *zone, struct page *page, int order)
+static void free_one_page(struct zone *zone, struct page *page, int order,
+				int migratetype)
 {
 	spin_lock(&zone->lock);
 	zone_clear_flag(zone, ZONE_ALL_UNRECLAIMABLE);
 	zone->pages_scanned = 0;
-	__free_one_page(page, zone, order);
+
+	__mod_zone_page_state(zone, NR_FREE_PAGES, 1 << order);
+	__free_one_page(page, zone, order, migratetype);
 	spin_unlock(&zone->lock);
 }
 
@@ -545,6 +557,9 @@ static void __free_pages_ok(struct page *page, unsigned int order)
 	unsigned long flags;
 	int i;
 	int bad = 0;
+	int clearMlocked = PageMlocked(page);
+
+	kmemcheck_free_shadow(page, order);
 
 	for (i = 0 ; i < (1 << order) ; ++i)
 		bad += free_pages_check(page + i);
@@ -560,8 +575,11 @@ static void __free_pages_ok(struct page *page, unsigned int order)
 	kernel_map_pages(page, 1 << order, 0);
 
 	local_irq_save(flags);
+	if (unlikely(clearMlocked))
+		free_page_mlock(page);
 	__count_vm_events(PGFREE, 1 << order);
-	free_one_page(page_zone(page), page, order);
+	free_one_page(page_zone(page), page, order,
+					get_pageblock_migratetype(page));
 	local_irq_restore(flags);
 }
 
@@ -632,7 +650,7 @@ static int prep_new_page(struct page *page, int order, gfp_t gfp_flags)
 {
 	if (unlikely(page_mapcount(page) |
 		(page->mapping != NULL)  |
-		(page_count(page) != 0)  |
+		(atomic_read(&page->_count) != 0)  |
 		(page->flags & PAGE_FLAGS_CHECK_AT_PREP))) {
 		bad_page(page);
 		return 1;
@@ -657,7 +675,8 @@ static int prep_new_page(struct page *page, int order, gfp_t gfp_flags)
  * Go through the free lists for the given migratetype and remove
  * the smallest available page from the freelists
  */
-static struct page *__rmqueue_smallest(struct zone *zone, unsigned int order,
+static inline
+struct page *__rmqueue_smallest(struct zone *zone, unsigned int order,
 						int migratetype)
 {
 	unsigned int current_order;
@@ -675,7 +694,6 @@ static struct page *__rmqueue_smallest(struct zone *zone, unsigned int order,
 		list_del(&page->lru);
 		rmv_page_order(page);
 		area->nr_free--;
-		__mod_zone_page_state(zone, NR_FREE_PAGES, - (1UL << order));
 		expand(zone, page, order, current_order, area, migratetype);
 		return page;
 	}
@@ -766,8 +784,8 @@ static int move_freepages_block(struct zone *zone, struct page *page,
 }
 
 /* Remove an element from the buddy allocator from the fallback list */
-static struct page *__rmqueue_fallback(struct zone *zone, int order,
-						int start_migratetype)
+static inline struct page *
+__rmqueue_fallback(struct zone *zone, int order, int start_migratetype)
 {
 	struct free_area * area;
 	int current_order;
@@ -815,8 +833,6 @@ static struct page *__rmqueue_fallback(struct zone *zone, int order,
 			/* Remove the page from the freelists */
 			list_del(&page->lru);
 			rmv_page_order(page);
-			__mod_zone_page_state(zone, NR_FREE_PAGES,
-							-(1UL << order));
 
 			if (current_order == pageblock_order)
 				set_pageblock_migratetype(page,
@@ -827,8 +843,7 @@ static struct page *__rmqueue_fallback(struct zone *zone, int order,
 		}
 	}
 
-	/* Use MIGRATE_RESERVE rather than fail an allocation */
-	return __rmqueue_smallest(zone, order, MIGRATE_RESERVE);
+	return NULL;
 }
 
 /*
@@ -840,11 +855,23 @@ static struct page *__rmqueue(struct zone *zone, unsigned int order,
 {
 	struct page *page;
 
+retry_reserve:
 	page = __rmqueue_smallest(zone, order, migratetype);
 
-	if (unlikely(!page))
+	if (unlikely(!page) && migratetype != MIGRATE_RESERVE) {
 		page = __rmqueue_fallback(zone, order, migratetype);
 
+		/*
+		 * Use MIGRATE_RESERVE rather than fail an allocation. goto
+		 * is used because __rmqueue_smallest is an inline function
+		 * and we want just one call site
+		 */
+		if (!page) {
+			migratetype = MIGRATE_RESERVE;
+			goto retry_reserve;
+		}
+	}
+
 	return page;
 }
 
@@ -878,6 +905,7 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order,
 		set_page_private(page, migratetype);
 		list = &page->lru;
 	}
+	__mod_zone_page_state(zone, NR_FREE_PAGES, -(i << order));
 	spin_unlock(&zone->lock);
 	return i;
 }
@@ -993,6 +1021,9 @@ static void free_hot_cold_page(struct page *page, int cold)
 	struct zone *zone = page_zone(page);
 	struct per_cpu_pages *pcp;
 	unsigned long flags;
+	int clearMlocked = PageMlocked(page);
+
+	kmemcheck_free_shadow(page, 0);
 
 	if (PageAnon(page))
 		page->mapping = NULL;
@@ -1007,13 +1038,16 @@ static void free_hot_cold_page(struct page *page, int cold)
 	kernel_map_pages(page, 1, 0);
 
 	pcp = &zone_pcp(zone, get_cpu())->pcp;
+	set_page_private(page, get_pageblock_migratetype(page));
 	local_irq_save(flags);
+	if (unlikely(clearMlocked))
+		free_page_mlock(page);
 	__count_vm_event(PGFREE);
+
 	if (cold)
 		list_add_tail(&page->lru, &pcp->list);
 	else
 		list_add(&page->lru, &pcp->list);
-	set_page_private(page, get_pageblock_migratetype(page));
 	pcp->count++;
 	if (pcp->count >= pcp->high) {
 		free_pages_bulk(zone, pcp->batch, &pcp->list, 0);
@@ -1047,6 +1081,16 @@ void split_page(struct page *page, unsigned int order)
 
 	VM_BUG_ON(PageCompound(page));
 	VM_BUG_ON(!page_count(page));
+
+#ifdef CONFIG_KMEMCHECK
+	/*
+	 * Split shadow pages too, because free(page[0]) would
+	 * otherwise free the whole shadow.
+	 */
+	if (kmemcheck_page_is_tracked(page))
+		split_page(virt_to_page(page[0].shadow), order);
+#endif
+
 	for (i = 1; i < (1 << order); i++)
 		set_page_refcounted(page + i);
 }
@@ -1056,14 +1100,15 @@ void split_page(struct page *page, unsigned int order)
  * we cheat by calling it from here, in the order > 0 path.  Saves a branch
  * or two.
  */
-static struct page *buffered_rmqueue(struct zone *preferred_zone,
-			struct zone *zone, int order, gfp_t gfp_flags)
+static inline
+struct page *buffered_rmqueue(struct zone *preferred_zone,
+			struct zone *zone, int order, gfp_t gfp_flags,
+			int migratetype)
 {
 	unsigned long flags;
 	struct page *page;
 	int cold = !!(gfp_flags & __GFP_COLD);
 	int cpu;
-	int migratetype = allocflags_to_migratetype(gfp_flags);
 
 again:
 	cpu  = get_cpu();
@@ -1100,8 +1145,22 @@ again:
 		list_del(&page->lru);
 		pcp->count--;
 	} else {
+		if (unlikely(gfp_flags & __GFP_NOFAIL)) {
+			/*
+			 * __GFP_NOFAIL is not to be used in new code.
+			 *
+			 * All __GFP_NOFAIL callers should be fixed so that they
+			 * properly detect and handle allocation failures.
+			 *
+			 * We most definitely don't want callers attempting to
+			 * allocate greater than single-page units with
+			 * __GFP_NOFAIL.
+			 */
+			WARN_ON_ONCE(order > 0);
+		}
 		spin_lock_irqsave(&zone->lock, flags);
 		page = __rmqueue(zone, order, migratetype);
+		__mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
 		spin_unlock(&zone->lock);
 		if (!page)
 			goto failed;
@@ -1123,10 +1182,15 @@ failed:
 	return NULL;
 }
 
-#define ALLOC_NO_WATERMARKS	0x01 /* don't check watermarks at all */
-#define ALLOC_WMARK_MIN		0x02 /* use pages_min watermark */
-#define ALLOC_WMARK_LOW		0x04 /* use pages_low watermark */
-#define ALLOC_WMARK_HIGH	0x08 /* use pages_high watermark */
+/* The ALLOC_WMARK bits are used as an index to zone->watermark */
+#define ALLOC_WMARK_MIN		WMARK_MIN
+#define ALLOC_WMARK_LOW		WMARK_LOW
+#define ALLOC_WMARK_HIGH	WMARK_HIGH
+#define ALLOC_NO_WATERMARKS	0x04 /* don't check watermarks at all */
+
+/* Mask to get the watermark bits */
+#define ALLOC_WMARK_MASK	(ALLOC_NO_WATERMARKS-1)
+
 #define ALLOC_HARDER		0x10 /* try to alloc harder */
 #define ALLOC_HIGH		0x20 /* __GFP_HIGH set */
 #define ALLOC_CPUSET		0x40 /* check for correct cpuset */
@@ -1384,23 +1448,18 @@ static void zlc_mark_zone_full(struct zonelist *zonelist, struct zoneref *z)
  */
 static struct page *
 get_page_from_freelist(gfp_t gfp_mask, nodemask_t *nodemask, unsigned int order,
-		struct zonelist *zonelist, int high_zoneidx, int alloc_flags)
+		struct zonelist *zonelist, int high_zoneidx, int alloc_flags,
+		struct zone *preferred_zone, int migratetype)
 {
 	struct zoneref *z;
 	struct page *page = NULL;
 	int classzone_idx;
-	struct zone *zone, *preferred_zone;
+	struct zone *zone;
 	nodemask_t *allowednodes = NULL;/* zonelist_cache approximation */
 	int zlc_active = 0;		/* set if using zonelist_cache */
 	int did_zlc_setup = 0;		/* just call zlc_setup() one time */
 
-	(void)first_zones_zonelist(zonelist, high_zoneidx, nodemask,
-							&preferred_zone);
-	if (!preferred_zone)
-		return NULL;
-
 	classzone_idx = zone_idx(preferred_zone);
-
 zonelist_scan:
 	/*
 	 * Scan zonelist, looking for a zone with enough free.
@@ -1415,31 +1474,49 @@ zonelist_scan:
 			!cpuset_zone_allowed_softwall(zone, gfp_mask))
 				goto try_next_zone;
 
+		BUILD_BUG_ON(ALLOC_NO_WATERMARKS < NR_WMARK);
 		if (!(alloc_flags & ALLOC_NO_WATERMARKS)) {
 			unsigned long mark;
-			if (alloc_flags & ALLOC_WMARK_MIN)
-				mark = zone->pages_min;
-			else if (alloc_flags & ALLOC_WMARK_LOW)
-				mark = zone->pages_low;
-			else
-				mark = zone->pages_high;
-			if (!zone_watermark_ok(zone, order, mark,
-				    classzone_idx, alloc_flags)) {
-				if (!zone_reclaim_mode ||
-				    !zone_reclaim(zone, gfp_mask, order))
+			int ret;
+
+			mark = zone->watermark[alloc_flags & ALLOC_WMARK_MASK];
+			if (zone_watermark_ok(zone, order, mark,
+				    classzone_idx, alloc_flags))
+				goto try_this_zone;
+
+			if (zone_reclaim_mode == 0)
+				goto this_zone_full;
+
+			ret = zone_reclaim(zone, gfp_mask, order);
+			switch (ret) {
+			case ZONE_RECLAIM_NOSCAN:
+				/* did not scan */
+				goto try_next_zone;
+			case ZONE_RECLAIM_FULL:
+				/* scanned but unreclaimable */
+				goto this_zone_full;
+			default:
+				/* did we reclaim enough */
+				if (!zone_watermark_ok(zone, order, mark,
+						classzone_idx, alloc_flags))
 					goto this_zone_full;
 			}
 		}
 
-		page = buffered_rmqueue(preferred_zone, zone, order, gfp_mask);
+try_this_zone:
+		page = buffered_rmqueue(preferred_zone, zone, order,
+						gfp_mask, migratetype);
 		if (page)
 			break;
 this_zone_full:
 		if (NUMA_BUILD)
 			zlc_mark_zone_full(zonelist, z);
 try_next_zone:
-		if (NUMA_BUILD && !did_zlc_setup) {
-			/* we do zlc_setup after the first zone is tried */
+		if (NUMA_BUILD && !did_zlc_setup && nr_online_nodes > 1) {
+			/*
+			 * we do zlc_setup after the first zone is tried but only
+			 * if there are multiple nodes make it worthwhile
+			 */
 			allowednodes = zlc_setup(zonelist, alloc_flags);
 			zlc_active = 1;
 			did_zlc_setup = 1;
@@ -1454,47 +1531,217 @@ try_next_zone:
 	return page;
 }
 
+static inline int
+should_alloc_retry(gfp_t gfp_mask, unsigned int order,
+				unsigned long pages_reclaimed)
+{
+	/* Do not loop if specifically requested */
+	if (gfp_mask & __GFP_NORETRY)
+		return 0;
+
+	/*
+	 * In this implementation, order <= PAGE_ALLOC_COSTLY_ORDER
+	 * means __GFP_NOFAIL, but that may not be true in other
+	 * implementations.
+	 */
+	if (order <= PAGE_ALLOC_COSTLY_ORDER)
+		return 1;
+
+	/*
+	 * For order > PAGE_ALLOC_COSTLY_ORDER, if __GFP_REPEAT is
+	 * specified, then we retry until we no longer reclaim any pages
+	 * (above), or we've reclaimed an order of pages at least as
+	 * large as the allocation's order. In both cases, if the
+	 * allocation still fails, we stop retrying.
+	 */
+	if (gfp_mask & __GFP_REPEAT && pages_reclaimed < (1 << order))
+		return 1;
+
+	/*
+	 * Don't let big-order allocations loop unless the caller
+	 * explicitly requests that.
+	 */
+	if (gfp_mask & __GFP_NOFAIL)
+		return 1;
+
+	return 0;
+}
+
+static inline struct page *
+__alloc_pages_may_oom(gfp_t gfp_mask, unsigned int order,
+	struct zonelist *zonelist, enum zone_type high_zoneidx,
+	nodemask_t *nodemask, struct zone *preferred_zone,
+	int migratetype)
+{
+	struct page *page;
+
+	/* Acquire the OOM killer lock for the zones in zonelist */
+	if (!try_set_zone_oom(zonelist, gfp_mask)) {
+		schedule_timeout_uninterruptible(1);
+		return NULL;
+	}
+
+	/*
+	 * Go through the zonelist yet one more time, keep very high watermark
+	 * here, this is only to catch a parallel oom killing, we must fail if
+	 * we're still under heavy pressure.
+	 */
+	page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask,
+		order, zonelist, high_zoneidx,
+		ALLOC_WMARK_HIGH|ALLOC_CPUSET,
+		preferred_zone, migratetype);
+	if (page)
+		goto out;
+
+	/* The OOM killer will not help higher order allocs */
+	if (order > PAGE_ALLOC_COSTLY_ORDER && !(gfp_mask & __GFP_NOFAIL))
+		goto out;
+
+	/* Exhausted what can be done so it's blamo time */
+	out_of_memory(zonelist, gfp_mask, order);
+
+out:
+	clear_zonelist_oom(zonelist, gfp_mask);
+	return page;
+}
+
+/* The really slow allocator path where we enter direct reclaim */
+static inline struct page *
+__alloc_pages_direct_reclaim(gfp_t gfp_mask, unsigned int order,
+	struct zonelist *zonelist, enum zone_type high_zoneidx,
+	nodemask_t *nodemask, int alloc_flags, struct zone *preferred_zone,
+	int migratetype, unsigned long *did_some_progress)
+{
+	struct page *page = NULL;
+	struct reclaim_state reclaim_state;
+	struct task_struct *p = current;
+
+	cond_resched();
+
+	/* We now go into synchronous reclaim */
+	cpuset_memory_pressure_bump();
+
+	/*
+	 * The task's cpuset might have expanded its set of allowable nodes
+	 */
+	p->flags |= PF_MEMALLOC;
+	lockdep_set_current_reclaim_state(gfp_mask);
+	reclaim_state.reclaimed_slab = 0;
+	p->reclaim_state = &reclaim_state;
+
+	*did_some_progress = try_to_free_pages(zonelist, order, gfp_mask, nodemask);
+
+	p->reclaim_state = NULL;
+	lockdep_clear_current_reclaim_state();
+	p->flags &= ~PF_MEMALLOC;
+
+	cond_resched();
+
+	if (order != 0)
+		drain_all_pages();
+
+	if (likely(*did_some_progress))
+		page = get_page_from_freelist(gfp_mask, nodemask, order,
+					zonelist, high_zoneidx,
+					alloc_flags, preferred_zone,
+					migratetype);
+	return page;
+}
+
 /*
- * This is the 'heart' of the zoned buddy allocator.
+ * This is called in the allocator slow-path if the allocation request is of
+ * sufficient urgency to ignore watermarks and take other desperate measures
  */
-struct page *
-__alloc_pages_internal(gfp_t gfp_mask, unsigned int order,
-			struct zonelist *zonelist, nodemask_t *nodemask)
+static inline struct page *
+__alloc_pages_high_priority(gfp_t gfp_mask, unsigned int order,
+	struct zonelist *zonelist, enum zone_type high_zoneidx,
+	nodemask_t *nodemask, struct zone *preferred_zone,
+	int migratetype)
+{
+	struct page *page;
+
+	do {
+		page = get_page_from_freelist(gfp_mask, nodemask, order,
+			zonelist, high_zoneidx, ALLOC_NO_WATERMARKS,
+			preferred_zone, migratetype);
+
+		if (!page && gfp_mask & __GFP_NOFAIL)
+			congestion_wait(WRITE, HZ/50);
+	} while (!page && (gfp_mask & __GFP_NOFAIL));
+
+	return page;
+}
+
+static inline
+void wake_all_kswapd(unsigned int order, struct zonelist *zonelist,
+						enum zone_type high_zoneidx)
 {
-	const gfp_t wait = gfp_mask & __GFP_WAIT;
-	enum zone_type high_zoneidx = gfp_zone(gfp_mask);
 	struct zoneref *z;
 	struct zone *zone;
-	struct page *page;
-	struct reclaim_state reclaim_state;
-	struct task_struct *p = current;
-	int do_retry;
-	int alloc_flags;
-	unsigned long did_some_progress;
-	unsigned long pages_reclaimed = 0;
 
-	lockdep_trace_alloc(gfp_mask);
+	for_each_zone_zonelist(zone, z, zonelist, high_zoneidx)
+		wakeup_kswapd(zone, order);
+}
 
-	might_sleep_if(wait);
+static inline int
+gfp_to_alloc_flags(gfp_t gfp_mask)
+{
+	struct task_struct *p = current;
+	int alloc_flags = ALLOC_WMARK_MIN | ALLOC_CPUSET;
+	const gfp_t wait = gfp_mask & __GFP_WAIT;
 
-	if (should_fail_alloc_page(gfp_mask, order))
-		return NULL;
+	/* __GFP_HIGH is assumed to be the same as ALLOC_HIGH to save a branch. */
+	BUILD_BUG_ON(__GFP_HIGH != ALLOC_HIGH);
 
-restart:
-	z = zonelist->_zonerefs;  /* the list of zones suitable for gfp_mask */
+	/*
+	 * The caller may dip into page reserves a bit more if the caller
+	 * cannot run direct reclaim, or if the caller has realtime scheduling
+	 * policy or is asking for __GFP_HIGH memory.  GFP_ATOMIC requests will
+	 * set both ALLOC_HARDER (!wait) and ALLOC_HIGH (__GFP_HIGH).
+	 */
+	alloc_flags |= (gfp_mask & __GFP_HIGH);
 
-	if (unlikely(!z->zone)) {
+	if (!wait) {
+		alloc_flags |= ALLOC_HARDER;
 		/*
-		 * Happens if we have an empty zonelist as a result of
-		 * GFP_THISNODE being used on a memoryless node
+		 * Ignore cpuset if GFP_ATOMIC (!wait) rather than fail alloc.
+		 * See also cpuset_zone_allowed() comment in kernel/cpuset.c.
 		 */
-		return NULL;
+		alloc_flags &= ~ALLOC_CPUSET;
+	} else if (unlikely(rt_task(p)))
+		alloc_flags |= ALLOC_HARDER;
+
+	if (likely(!(gfp_mask & __GFP_NOMEMALLOC))) {
+		if (!in_interrupt() &&
+		    ((p->flags & PF_MEMALLOC) ||
+		     unlikely(test_thread_flag(TIF_MEMDIE))))
+			alloc_flags |= ALLOC_NO_WATERMARKS;
 	}
 
-	page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask, order,
-			zonelist, high_zoneidx, ALLOC_WMARK_LOW|ALLOC_CPUSET);
-	if (page)
-		goto got_pg;
+	return alloc_flags;
+}
+
+static inline struct page *
+__alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
+	struct zonelist *zonelist, enum zone_type high_zoneidx,
+	nodemask_t *nodemask, struct zone *preferred_zone,
+	int migratetype)
+{
+	const gfp_t wait = gfp_mask & __GFP_WAIT;
+	struct page *page = NULL;
+	int alloc_flags;
+	unsigned long pages_reclaimed = 0;
+	unsigned long did_some_progress;
+	struct task_struct *p = current;
+
+	/*
+	 * In the slowpath, we sanity check order to avoid ever trying to
+	 * reclaim >= MAX_ORDER areas which will never succeed. Callers may
+	 * be using allocators in order of preference for an area that is
+	 * too large.
+	 */
+	if (WARN_ON_ONCE(order >= MAX_ORDER))
+		return NULL;
 
 	/*
 	 * GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and
@@ -1507,154 +1754,83 @@ restart:
 	if (NUMA_BUILD && (gfp_mask & GFP_THISNODE) == GFP_THISNODE)
 		goto nopage;
 
-	for_each_zone_zonelist(zone, z, zonelist, high_zoneidx)
-		wakeup_kswapd(zone, order);
+	wake_all_kswapd(order, zonelist, high_zoneidx);
 
 	/*
 	 * OK, we're below the kswapd watermark and have kicked background
 	 * reclaim. Now things get more complex, so set up alloc_flags according
 	 * to how we want to proceed.
-	 *
-	 * The caller may dip into page reserves a bit more if the caller
-	 * cannot run direct reclaim, or if the caller has realtime scheduling
-	 * policy or is asking for __GFP_HIGH memory.  GFP_ATOMIC requests will
-	 * set both ALLOC_HARDER (!wait) and ALLOC_HIGH (__GFP_HIGH).
 	 */
-	alloc_flags = ALLOC_WMARK_MIN;
-	if ((unlikely(rt_task(p)) && !in_interrupt()) || !wait)
-		alloc_flags |= ALLOC_HARDER;
-	if (gfp_mask & __GFP_HIGH)
-		alloc_flags |= ALLOC_HIGH;
-	if (wait)
-		alloc_flags |= ALLOC_CPUSET;
+	alloc_flags = gfp_to_alloc_flags(gfp_mask);
 
-	/*
-	 * Go through the zonelist again. Let __GFP_HIGH and allocations
-	 * coming from realtime tasks go deeper into reserves.
-	 *
-	 * This is the last chance, in general, before the goto nopage.
-	 * Ignore cpuset if GFP_ATOMIC (!wait) rather than fail alloc.
-	 * See also cpuset_zone_allowed() comment in kernel/cpuset.c.
-	 */
+restart:
+	/* This is the last chance, in general, before the goto nopage. */
 	page = get_page_from_freelist(gfp_mask, nodemask, order, zonelist,
-						high_zoneidx, alloc_flags);
+			high_zoneidx, alloc_flags & ~ALLOC_NO_WATERMARKS,
+			preferred_zone, migratetype);
 	if (page)
 		goto got_pg;
 
-	/* This allocation should allow future memory freeing. */
-
 rebalance:
-	if (((p->flags & PF_MEMALLOC) || unlikely(test_thread_flag(TIF_MEMDIE)))
-			&& !in_interrupt()) {
-		if (!(gfp_mask & __GFP_NOMEMALLOC)) {
-nofail_alloc:
-			/* go through the zonelist yet again, ignoring mins */
-			page = get_page_from_freelist(gfp_mask, nodemask, order,
-				zonelist, high_zoneidx, ALLOC_NO_WATERMARKS);
-			if (page)
-				goto got_pg;
-			if (gfp_mask & __GFP_NOFAIL) {
-				congestion_wait(WRITE, HZ/50);
-				goto nofail_alloc;
-			}
-		}
-		goto nopage;
+	/* Allocate without watermarks if the context allows */
+	if (alloc_flags & ALLOC_NO_WATERMARKS) {
+		page = __alloc_pages_high_priority(gfp_mask, order,
+				zonelist, high_zoneidx, nodemask,
+				preferred_zone, migratetype);
+		if (page)
+			goto got_pg;
 	}
 
 	/* Atomic allocations - we can't balance anything */
 	if (!wait)
 		goto nopage;
 
-	cond_resched();
+	/* Avoid recursion of direct reclaim */
+	if (p->flags & PF_MEMALLOC)
+		goto nopage;
+
+	/* Try direct reclaim and then allocating */
+	page = __alloc_pages_direct_reclaim(gfp_mask, order,
+					zonelist, high_zoneidx,
+					nodemask,
+					alloc_flags, preferred_zone,
+					migratetype, &did_some_progress);
+	if (page)
+		goto got_pg;
 
-	/* We now go into synchronous reclaim */
-	cpuset_memory_pressure_bump();
 	/*
-	 * The task's cpuset might have expanded its set of allowable nodes
+	 * If we failed to make any progress reclaiming, then we are
+	 * running out of options and have to consider going OOM
 	 */
-	cpuset_update_task_memory_state();
-	p->flags |= PF_MEMALLOC;
-
-	lockdep_set_current_reclaim_state(gfp_mask);
-	reclaim_state.reclaimed_slab = 0;
-	p->reclaim_state = &reclaim_state;
-
-	did_some_progress = try_to_free_pages(zonelist, order,
-						gfp_mask, nodemask);
-
-	p->reclaim_state = NULL;
-	lockdep_clear_current_reclaim_state();
-	p->flags &= ~PF_MEMALLOC;
-
-	cond_resched();
+	if (!did_some_progress) {
+		if ((gfp_mask & __GFP_FS) && !(gfp_mask & __GFP_NORETRY)) {
+			if (oom_killer_disabled)
+				goto nopage;
+			page = __alloc_pages_may_oom(gfp_mask, order,
+					zonelist, high_zoneidx,
+					nodemask, preferred_zone,
+					migratetype);
+			if (page)
+				goto got_pg;
 
-	if (order != 0)
-		drain_all_pages();
+			/*
+			 * The OOM killer does not trigger for high-order
+			 * ~__GFP_NOFAIL allocations so if no progress is being
+			 * made, there are no other options and retrying is
+			 * unlikely to help.
+			 */
+			if (order > PAGE_ALLOC_COSTLY_ORDER &&
+						!(gfp_mask & __GFP_NOFAIL))
+				goto nopage;
 
-	if (likely(did_some_progress)) {
-		page = get_page_from_freelist(gfp_mask, nodemask, order,
-					zonelist, high_zoneidx, alloc_flags);
-		if (page)
-			goto got_pg;
-	} else if ((gfp_mask & __GFP_FS) && !(gfp_mask & __GFP_NORETRY)) {
-		if (!try_set_zone_oom(zonelist, gfp_mask)) {
-			schedule_timeout_uninterruptible(1);
 			goto restart;
 		}
-
-		/*
-		 * Go through the zonelist yet one more time, keep
-		 * very high watermark here, this is only to catch
-		 * a parallel oom killing, we must fail if we're still
-		 * under heavy pressure.
-		 */
-		page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask,
-			order, zonelist, high_zoneidx,
-			ALLOC_WMARK_HIGH|ALLOC_CPUSET);
-		if (page) {
-			clear_zonelist_oom(zonelist, gfp_mask);
-			goto got_pg;
-		}
-
-		/* The OOM killer will not help higher order allocs so fail */
-		if (order > PAGE_ALLOC_COSTLY_ORDER) {
-			clear_zonelist_oom(zonelist, gfp_mask);
-			goto nopage;
-		}
-
-		out_of_memory(zonelist, gfp_mask, order);
-		clear_zonelist_oom(zonelist, gfp_mask);
-		goto restart;
 	}
 
-	/*
-	 * Don't let big-order allocations loop unless the caller explicitly
-	 * requests that.  Wait for some write requests to complete then retry.
-	 *
-	 * In this implementation, order <= PAGE_ALLOC_COSTLY_ORDER
-	 * means __GFP_NOFAIL, but that may not be true in other
-	 * implementations.
-	 *
-	 * For order > PAGE_ALLOC_COSTLY_ORDER, if __GFP_REPEAT is
-	 * specified, then we retry until we no longer reclaim any pages
-	 * (above), or we've reclaimed an order of pages at least as
-	 * large as the allocation's order. In both cases, if the
-	 * allocation still fails, we stop retrying.
-	 */
+	/* Check if we should retry the allocation */
 	pages_reclaimed += did_some_progress;
-	do_retry = 0;
-	if (!(gfp_mask & __GFP_NORETRY)) {
-		if (order <= PAGE_ALLOC_COSTLY_ORDER) {
-			do_retry = 1;
-		} else {
-			if (gfp_mask & __GFP_REPEAT &&
-				pages_reclaimed < (1 << order))
-					do_retry = 1;
-		}
-		if (gfp_mask & __GFP_NOFAIL)
-			do_retry = 1;
-	}
-	if (do_retry) {
+	if (should_alloc_retry(gfp_mask, order, pages_reclaimed)) {
+		/* Wait for some write requests to complete then retry */
 		congestion_wait(WRITE, HZ/50);
 		goto rebalance;
 	}
@@ -1667,10 +1843,58 @@ nopage:
 		dump_stack();
 		show_mem();
 	}
+	return page;
 got_pg:
+	if (kmemcheck_enabled)
+		kmemcheck_pagealloc_alloc(page, order, gfp_mask);
+	return page;
+
+}
+
+/*
+ * This is the 'heart' of the zoned buddy allocator.
+ */
+struct page *
+__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
+			struct zonelist *zonelist, nodemask_t *nodemask)
+{
+	enum zone_type high_zoneidx = gfp_zone(gfp_mask);
+	struct zone *preferred_zone;
+	struct page *page;
+	int migratetype = allocflags_to_migratetype(gfp_mask);
+
+	lockdep_trace_alloc(gfp_mask);
+
+	might_sleep_if(gfp_mask & __GFP_WAIT);
+
+	if (should_fail_alloc_page(gfp_mask, order))
+		return NULL;
+
+	/*
+	 * Check the zones suitable for the gfp_mask contain at least one
+	 * valid zone. It's possible to have an empty zonelist as a result
+	 * of GFP_THISNODE and a memoryless node
+	 */
+	if (unlikely(!zonelist->_zonerefs->zone))
+		return NULL;
+
+	/* The preferred zone is used for statistics later */
+	first_zones_zonelist(zonelist, high_zoneidx, nodemask, &preferred_zone);
+	if (!preferred_zone)
+		return NULL;
+
+	/* First allocation attempt */
+	page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, nodemask, order,
+			zonelist, high_zoneidx, ALLOC_WMARK_LOW|ALLOC_CPUSET,
+			preferred_zone, migratetype);
+	if (unlikely(!page))
+		page = __alloc_pages_slowpath(gfp_mask, order,
+				zonelist, high_zoneidx, nodemask,
+				preferred_zone, migratetype);
+
 	return page;
 }
-EXPORT_SYMBOL(__alloc_pages_internal);
+EXPORT_SYMBOL(__alloc_pages_nodemask);
 
 /*
  * Common helper functions.
@@ -1799,7 +2023,7 @@ static unsigned int nr_free_zone_pages(int offset)
 
 	for_each_zone_zonelist(zone, z, zonelist, offset) {
 		unsigned long size = zone->present_pages;
-		unsigned long high = zone->pages_high;
+		unsigned long high = high_wmark_pages(zone);
 		if (size > high)
 			sum += size - high;
 	}
@@ -1891,19 +2115,14 @@ void show_free_areas(void)
 
 	printk("Active_anon:%lu active_file:%lu inactive_anon:%lu\n"
 		" inactive_file:%lu"
-//TODO:  check/adjust line lengths
-#ifdef CONFIG_UNEVICTABLE_LRU
 		" unevictable:%lu"
-#endif
 		" dirty:%lu writeback:%lu unstable:%lu\n"
 		" free:%lu slab:%lu mapped:%lu pagetables:%lu bounce:%lu\n",
 		global_page_state(NR_ACTIVE_ANON),
 		global_page_state(NR_ACTIVE_FILE),
 		global_page_state(NR_INACTIVE_ANON),
 		global_page_state(NR_INACTIVE_FILE),
-#ifdef CONFIG_UNEVICTABLE_LRU
 		global_page_state(NR_UNEVICTABLE),
-#endif
 		global_page_state(NR_FILE_DIRTY),
 		global_page_state(NR_WRITEBACK),
 		global_page_state(NR_UNSTABLE_NFS),
@@ -1927,25 +2146,21 @@ void show_free_areas(void)
 			" inactive_anon:%lukB"
 			" active_file:%lukB"
 			" inactive_file:%lukB"
-#ifdef CONFIG_UNEVICTABLE_LRU
 			" unevictable:%lukB"
-#endif
 			" present:%lukB"
 			" pages_scanned:%lu"
 			" all_unreclaimable? %s"
 			"\n",
 			zone->name,
 			K(zone_page_state(zone, NR_FREE_PAGES)),
-			K(zone->pages_min),
-			K(zone->pages_low),
-			K(zone->pages_high),
+			K(min_wmark_pages(zone)),
+			K(low_wmark_pages(zone)),
+			K(high_wmark_pages(zone)),
 			K(zone_page_state(zone, NR_ACTIVE_ANON)),
 			K(zone_page_state(zone, NR_INACTIVE_ANON)),
 			K(zone_page_state(zone, NR_ACTIVE_FILE)),
 			K(zone_page_state(zone, NR_INACTIVE_FILE)),
-#ifdef CONFIG_UNEVICTABLE_LRU
 			K(zone_page_state(zone, NR_UNEVICTABLE)),
-#endif
 			K(zone->present_pages),
 			zone->pages_scanned,
 			(zone_is_all_unreclaimable(zone) ? "yes" : "no")
@@ -2103,7 +2318,7 @@ int numa_zonelist_order_handler(ctl_table *table, int write,
 }
 
 
-#define MAX_NODE_LOAD (num_online_nodes())
+#define MAX_NODE_LOAD (nr_online_nodes)
 static int node_load[MAX_NUMNODES];
 
 /**
@@ -2312,7 +2527,7 @@ static void build_zonelists(pg_data_t *pgdat)
 
 	/* NUMA-aware ordering of nodes */
 	local_node = pgdat->node_id;
-	load = num_online_nodes();
+	load = nr_online_nodes;
 	prev_node = local_node;
 	nodes_clear(used_mask);
 
@@ -2463,7 +2678,7 @@ void build_all_zonelists(void)
 
 	printk("Built %i zonelists in %s order, mobility grouping %s.  "
 		"Total pages: %ld\n",
-			num_online_nodes(),
+			nr_online_nodes,
 			zonelist_order_name[current_zonelist_order],
 			page_group_by_mobility_disabled ? "off" : "on",
 			vm_total_pages);
@@ -2542,8 +2757,8 @@ static inline unsigned long wait_table_bits(unsigned long size)
 
 /*
  * Mark a number of pageblocks as MIGRATE_RESERVE. The number
- * of blocks reserved is based on zone->pages_min. The memory within the
- * reserve will tend to store contiguous free pages. Setting min_free_kbytes
+ * of blocks reserved is based on min_wmark_pages(zone). The memory within
+ * the reserve will tend to store contiguous free pages. Setting min_free_kbytes
  * higher will lead to a bigger reserve which will get freed as contiguous
  * blocks as reclaim kicks in
  */
@@ -2556,7 +2771,7 @@ static void setup_zone_migrate_reserve(struct zone *zone)
 	/* Get the start pfn, end pfn and the number of blocks to reserve */
 	start_pfn = zone->zone_start_pfn;
 	end_pfn = start_pfn + zone->spanned_pages;
-	reserve = roundup(zone->pages_min, pageblock_nr_pages) >>
+	reserve = roundup(min_wmark_pages(zone), pageblock_nr_pages) >>
 							pageblock_order;
 
 	for (pfn = start_pfn; pfn < end_pfn; pfn += pageblock_nr_pages) {
@@ -3488,7 +3703,7 @@ static void __paginginit free_area_init_core(struct pglist_data *pgdat,
 		zone_pcp_init(zone);
 		for_each_lru(l) {
 			INIT_LIST_HEAD(&zone->lru[l].list);
-			zone->lru[l].nr_scan = 0;
+			zone->lru[l].nr_saved_scan = 0;
 		}
 		zone->reclaim_stat.recent_rotated[0] = 0;
 		zone->reclaim_stat.recent_rotated[1] = 0;
@@ -4025,6 +4240,11 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 						early_node_map[i].start_pfn,
 						early_node_map[i].end_pfn);
 
+	/*
+	 * find_zone_movable_pfns_for_nodes/early_calculate_totalpages init
+	 * that node_mask, clear it at first
+	 */
+	nodes_clear(node_states[N_HIGH_MEMORY]);
 	/* Initialise every node */
 	mminit_verify_pageflags_layout();
 	setup_nr_node_ids();
@@ -4159,8 +4379,8 @@ static void calculate_totalreserve_pages(void)
 					max = zone->lowmem_reserve[j];
 			}
 
-			/* we treat pages_high as reserved pages. */
-			max += zone->pages_high;
+			/* we treat the high watermark as reserved pages. */
+			max += high_wmark_pages(zone);
 
 			if (max > zone->present_pages)
 				max = zone->present_pages;
@@ -4210,12 +4430,13 @@ static void setup_per_zone_lowmem_reserve(void)
 }
 
 /**
- * setup_per_zone_pages_min - called when min_free_kbytes changes.
+ * setup_per_zone_wmarks - called when min_free_kbytes changes
+ * or when memory is hot-{added|removed}
  *
- * Ensures that the pages_{min,low,high} values for each zone are set correctly
- * with respect to min_free_kbytes.
+ * Ensures that the watermark[min,low,high] values for each zone are set
+ * correctly with respect to min_free_kbytes.
  */
-void setup_per_zone_pages_min(void)
+void setup_per_zone_wmarks(void)
 {
 	unsigned long pages_min = min_free_kbytes >> (PAGE_SHIFT - 10);
 	unsigned long lowmem_pages = 0;
@@ -4240,7 +4461,7 @@ void setup_per_zone_pages_min(void)
 			 * need highmem pages, so cap pages_min to a small
 			 * value here.
 			 *
-			 * The (pages_high-pages_low) and (pages_low-pages_min)
+			 * The WMARK_HIGH-WMARK_LOW and (WMARK_LOW-WMARK_MIN)
 			 * deltas controls asynch page reclaim, and so should
 			 * not be capped for highmem.
 			 */
@@ -4251,17 +4472,17 @@ void setup_per_zone_pages_min(void)
 				min_pages = SWAP_CLUSTER_MAX;
 			if (min_pages > 128)
 				min_pages = 128;
-			zone->pages_min = min_pages;
+			zone->watermark[WMARK_MIN] = min_pages;
 		} else {
 			/*
 			 * If it's a lowmem zone, reserve a number of pages
 			 * proportionate to the zone's size.
 			 */
-			zone->pages_min = tmp;
+			zone->watermark[WMARK_MIN] = tmp;
 		}
 
-		zone->pages_low   = zone->pages_min + (tmp >> 2);
-		zone->pages_high  = zone->pages_min + (tmp >> 1);
+		zone->watermark[WMARK_LOW]  = min_wmark_pages(zone) + (tmp >> 2);
+		zone->watermark[WMARK_HIGH] = min_wmark_pages(zone) + (tmp >> 1);
 		setup_zone_migrate_reserve(zone);
 		spin_unlock_irqrestore(&zone->lock, flags);
 	}
@@ -4271,8 +4492,6 @@ void setup_per_zone_pages_min(void)
 }
 
 /**
- * setup_per_zone_inactive_ratio - called when min_free_kbytes changes.
- *
  * The inactive anon list should be small enough that the VM never has to
  * do too much work, but large enough that each inactive page has a chance
  * to be referenced again before it is swapped out.
@@ -4293,21 +4512,26 @@ void setup_per_zone_pages_min(void)
  *    1TB     101        10GB
  *   10TB     320        32GB
  */
-static void setup_per_zone_inactive_ratio(void)
+void calculate_zone_inactive_ratio(struct zone *zone)
 {
-	struct zone *zone;
-
-	for_each_zone(zone) {
-		unsigned int gb, ratio;
+	unsigned int gb, ratio;
 
-		/* Zone size in gigabytes */
-		gb = zone->present_pages >> (30 - PAGE_SHIFT);
+	/* Zone size in gigabytes */
+	gb = zone->present_pages >> (30 - PAGE_SHIFT);
+	if (gb)
 		ratio = int_sqrt(10 * gb);
-		if (!ratio)
-			ratio = 1;
+	else
+		ratio = 1;
 
-		zone->inactive_ratio = ratio;
-	}
+	zone->inactive_ratio = ratio;
+}
+
+static void __init setup_per_zone_inactive_ratio(void)
+{
+	struct zone *zone;
+
+	for_each_zone(zone)
+		calculate_zone_inactive_ratio(zone);
 }
 
 /*
@@ -4334,7 +4558,7 @@ static void setup_per_zone_inactive_ratio(void)
  * 8192MB:	11584k
  * 16384MB:	16384k
  */
-static int __init init_per_zone_pages_min(void)
+static int __init init_per_zone_wmark_min(void)
 {
 	unsigned long lowmem_kbytes;
 
@@ -4345,12 +4569,12 @@ static int __init init_per_zone_pages_min(void)
 		min_free_kbytes = 128;
 	if (min_free_kbytes > 65536)
 		min_free_kbytes = 65536;
-	setup_per_zone_pages_min();
+	setup_per_zone_wmarks();
 	setup_per_zone_lowmem_reserve();
 	setup_per_zone_inactive_ratio();
 	return 0;
 }
-module_init(init_per_zone_pages_min)
+module_init(init_per_zone_wmark_min)
 
 /*
  * min_free_kbytes_sysctl_handler - just a wrapper around proc_dointvec() so 
@@ -4362,7 +4586,7 @@ int min_free_kbytes_sysctl_handler(ctl_table *table, int write,
 {
 	proc_dointvec(table, write, file, buffer, length, ppos);
 	if (write)
-		setup_per_zone_pages_min();
+		setup_per_zone_wmarks();
 	return 0;
 }
 
@@ -4406,7 +4630,7 @@ int sysctl_min_slab_ratio_sysctl_handler(ctl_table *table, int write,
  *	whenever sysctl_lowmem_reserve_ratio changes.
  *
  * The reserve ratio obviously has absolutely no relation with the
- * pages_min watermarks. The lowmem reserve ratio can only make sense
+ * minimum watermarks. The lowmem reserve ratio can only make sense
  * if in function of the boot time zone sizes.
  */
 int lowmem_reserve_ratio_sysctl_handler(ctl_table *table, int write,
@@ -4513,23 +4737,13 @@ void *__init alloc_large_system_hash(const char *tablename,
 		else if (hashdist)
 			table = __vmalloc(size, GFP_ATOMIC, PAGE_KERNEL);
 		else {
-			unsigned long order = get_order(size);
-			table = (void*) __get_free_pages(GFP_ATOMIC, order);
 			/*
 			 * If bucketsize is not a power-of-two, we may free
-			 * some pages at the end of hash table.
+			 * some pages at the end of hash table which
+			 * alloc_pages_exact() automatically does
 			 */
-			if (table) {
-				unsigned long alloc_end = (unsigned long)table +
-						(PAGE_SIZE << order);
-				unsigned long used = (unsigned long)table +
-						PAGE_ALIGN(size);
-				split_page(virt_to_page(table), order);
-				while (used < alloc_end) {
-					free_page(used);
-					used += PAGE_SIZE;
-				}
-			}
+			if (get_order(size) < MAX_ORDER)
+				table = alloc_pages_exact(size, GFP_ATOMIC);
 		}
 	} while (!table && size > PAGE_SIZE && --log2qty);
 
diff --git a/mm/page_io.c b/mm/page_io.c
index 3023c475e04..c6f3e5071de 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -120,7 +120,7 @@ out:
 	return ret;
 }
 
-int swap_readpage(struct file *file, struct page *page)
+int swap_readpage(struct page *page)
 {
 	struct bio *bio;
 	int ret = 0;
diff --git a/mm/readahead.c b/mm/readahead.c
index 133b6d52551..aa1aa234523 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -133,15 +133,12 @@ out:
 }
 
 /*
- * do_page_cache_readahead actually reads a chunk of disk.  It allocates all
+ * __do_page_cache_readahead() actually reads a chunk of disk.  It allocates all
  * the pages first, then submits them all for I/O. This avoids the very bad
  * behaviour which would occur if page allocations are causing VM writeback.
  * We really don't want to intermingle reads and writes like that.
  *
  * Returns the number of pages requested, or the maximum amount of I/O allowed.
- *
- * do_page_cache_readahead() returns -1 if it encountered request queue
- * congestion.
  */
 static int
 __do_page_cache_readahead(struct address_space *mapping, struct file *filp,
@@ -210,6 +207,7 @@ int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
 	if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages))
 		return -EINVAL;
 
+	nr_to_read = max_sane_readahead(nr_to_read);
 	while (nr_to_read) {
 		int err;
 
@@ -231,22 +229,6 @@ int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
 }
 
 /*
- * This version skips the IO if the queue is read-congested, and will tell the
- * block layer to abandon the readahead if request allocation would block.
- *
- * force_page_cache_readahead() will ignore queue congestion and will block on
- * request queues.
- */
-int do_page_cache_readahead(struct address_space *mapping, struct file *filp,
-			pgoff_t offset, unsigned long nr_to_read)
-{
-	if (bdi_read_congested(mapping->backing_dev_info))
-		return -1;
-
-	return __do_page_cache_readahead(mapping, filp, offset, nr_to_read, 0);
-}
-
-/*
  * Given a desired number of PAGE_CACHE_SIZE readahead pages, return a
  * sensible upper limit.
  */
@@ -259,7 +241,7 @@ unsigned long max_sane_readahead(unsigned long nr)
 /*
  * Submit IO for the read-ahead request in file_ra_state.
  */
-static unsigned long ra_submit(struct file_ra_state *ra,
+unsigned long ra_submit(struct file_ra_state *ra,
 		       struct address_space *mapping, struct file *filp)
 {
 	int actual;
@@ -348,6 +330,59 @@ static unsigned long get_next_ra_size(struct file_ra_state *ra,
  */
 
 /*
+ * Count contiguously cached pages from @offset-1 to @offset-@max,
+ * this count is a conservative estimation of
+ * 	- length of the sequential read sequence, or
+ * 	- thrashing threshold in memory tight systems
+ */
+static pgoff_t count_history_pages(struct address_space *mapping,
+				   struct file_ra_state *ra,
+				   pgoff_t offset, unsigned long max)
+{
+	pgoff_t head;
+
+	rcu_read_lock();
+	head = radix_tree_prev_hole(&mapping->page_tree, offset - 1, max);
+	rcu_read_unlock();
+
+	return offset - 1 - head;
+}
+
+/*
+ * page cache context based read-ahead
+ */
+static int try_context_readahead(struct address_space *mapping,
+				 struct file_ra_state *ra,
+				 pgoff_t offset,
+				 unsigned long req_size,
+				 unsigned long max)
+{
+	pgoff_t size;
+
+	size = count_history_pages(mapping, ra, offset, max);
+
+	/*
+	 * no history pages:
+	 * it could be a random read
+	 */
+	if (!size)
+		return 0;
+
+	/*
+	 * starts from beginning of file:
+	 * it is a strong indication of long-run stream (or whole-file-read)
+	 */
+	if (size >= offset)
+		size *= 2;
+
+	ra->start = offset;
+	ra->size = get_init_ra_size(size + req_size, max);
+	ra->async_size = ra->size;
+
+	return 1;
+}
+
+/*
  * A minimal readahead algorithm for trivial sequential/random reads.
  */
 static unsigned long
@@ -356,34 +391,26 @@ ondemand_readahead(struct address_space *mapping,
 		   bool hit_readahead_marker, pgoff_t offset,
 		   unsigned long req_size)
 {
-	int	max = ra->ra_pages;	/* max readahead pages */
-	pgoff_t prev_offset;
-	int	sequential;
+	unsigned long max = max_sane_readahead(ra->ra_pages);
+
+	/*
+	 * start of file
+	 */
+	if (!offset)
+		goto initial_readahead;
 
 	/*
 	 * It's the expected callback offset, assume sequential access.
 	 * Ramp up sizes, and push forward the readahead window.
 	 */
-	if (offset && (offset == (ra->start + ra->size - ra->async_size) ||
-			offset == (ra->start + ra->size))) {
+	if ((offset == (ra->start + ra->size - ra->async_size) ||
+	     offset == (ra->start + ra->size))) {
 		ra->start += ra->size;
 		ra->size = get_next_ra_size(ra, max);
 		ra->async_size = ra->size;
 		goto readit;
 	}
 
-	prev_offset = ra->prev_pos >> PAGE_CACHE_SHIFT;
-	sequential = offset - prev_offset <= 1UL || req_size > max;
-
-	/*
-	 * Standalone, small read.
-	 * Read as is, and do not pollute the readahead state.
-	 */
-	if (!hit_readahead_marker && !sequential) {
-		return __do_page_cache_readahead(mapping, filp,
-						offset, req_size, 0);
-	}
-
 	/*
 	 * Hit a marked page without valid readahead state.
 	 * E.g. interleaved reads.
@@ -394,7 +421,7 @@ ondemand_readahead(struct address_space *mapping,
 		pgoff_t start;
 
 		rcu_read_lock();
-		start = radix_tree_next_hole(&mapping->page_tree, offset,max+1);
+		start = radix_tree_next_hole(&mapping->page_tree, offset+1,max);
 		rcu_read_unlock();
 
 		if (!start || start - offset > max)
@@ -402,23 +429,53 @@ ondemand_readahead(struct address_space *mapping,
 
 		ra->start = start;
 		ra->size = start - offset;	/* old async_size */
+		ra->size += req_size;
 		ra->size = get_next_ra_size(ra, max);
 		ra->async_size = ra->size;
 		goto readit;
 	}
 
 	/*
-	 * It may be one of
-	 * 	- first read on start of file
-	 * 	- sequential cache miss
-	 * 	- oversize random read
-	 * Start readahead for it.
+	 * oversize read
+	 */
+	if (req_size > max)
+		goto initial_readahead;
+
+	/*
+	 * sequential cache miss
+	 */
+	if (offset - (ra->prev_pos >> PAGE_CACHE_SHIFT) <= 1UL)
+		goto initial_readahead;
+
+	/*
+	 * Query the page cache and look for the traces(cached history pages)
+	 * that a sequential stream would leave behind.
+	 */
+	if (try_context_readahead(mapping, ra, offset, req_size, max))
+		goto readit;
+
+	/*
+	 * standalone, small random read
+	 * Read as is, and do not pollute the readahead state.
 	 */
+	return __do_page_cache_readahead(mapping, filp, offset, req_size, 0);
+
+initial_readahead:
 	ra->start = offset;
 	ra->size = get_init_ra_size(req_size, max);
 	ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;
 
 readit:
+	/*
+	 * Will this read hit the readahead marker made by itself?
+	 * If so, trigger the readahead marker hit now, and merge
+	 * the resulted next readahead window into the current one.
+	 */
+	if (offset == ra->start && ra->size == ra->async_size) {
+		ra->async_size = get_next_ra_size(ra, max);
+		ra->size += ra->async_size;
+	}
+
 	return ra_submit(ra, mapping, filp);
 }
 
diff --git a/mm/rmap.c b/mm/rmap.c
index 23122af3261..c9ccc1a72dc 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -333,7 +333,9 @@ static int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma)
  * repeatedly from either page_referenced_anon or page_referenced_file.
  */
 static int page_referenced_one(struct page *page,
-	struct vm_area_struct *vma, unsigned int *mapcount)
+			       struct vm_area_struct *vma,
+			       unsigned int *mapcount,
+			       unsigned long *vm_flags)
 {
 	struct mm_struct *mm = vma->vm_mm;
 	unsigned long address;
@@ -381,11 +383,14 @@ out_unmap:
 	(*mapcount)--;
 	pte_unmap_unlock(pte, ptl);
 out:
+	if (referenced)
+		*vm_flags |= vma->vm_flags;
 	return referenced;
 }
 
 static int page_referenced_anon(struct page *page,
-				struct mem_cgroup *mem_cont)
+				struct mem_cgroup *mem_cont,
+				unsigned long *vm_flags)
 {
 	unsigned int mapcount;
 	struct anon_vma *anon_vma;
@@ -405,7 +410,8 @@ static int page_referenced_anon(struct page *page,
 		 */
 		if (mem_cont && !mm_match_cgroup(vma->vm_mm, mem_cont))
 			continue;
-		referenced += page_referenced_one(page, vma, &mapcount);
+		referenced += page_referenced_one(page, vma,
+						  &mapcount, vm_flags);
 		if (!mapcount)
 			break;
 	}
@@ -418,6 +424,7 @@ static int page_referenced_anon(struct page *page,
  * page_referenced_file - referenced check for object-based rmap
  * @page: the page we're checking references on.
  * @mem_cont: target memory controller
+ * @vm_flags: collect encountered vma->vm_flags who actually referenced the page
  *
  * For an object-based mapped page, find all the places it is mapped and
  * check/clear the referenced flag.  This is done by following the page->mapping
@@ -427,7 +434,8 @@ static int page_referenced_anon(struct page *page,
  * This function is only called from page_referenced for object-based pages.
  */
 static int page_referenced_file(struct page *page,
-				struct mem_cgroup *mem_cont)
+				struct mem_cgroup *mem_cont,
+				unsigned long *vm_flags)
 {
 	unsigned int mapcount;
 	struct address_space *mapping = page->mapping;
@@ -467,7 +475,8 @@ static int page_referenced_file(struct page *page,
 		 */
 		if (mem_cont && !mm_match_cgroup(vma->vm_mm, mem_cont))
 			continue;
-		referenced += page_referenced_one(page, vma, &mapcount);
+		referenced += page_referenced_one(page, vma,
+						  &mapcount, vm_flags);
 		if (!mapcount)
 			break;
 	}
@@ -481,29 +490,35 @@ static int page_referenced_file(struct page *page,
  * @page: the page to test
  * @is_locked: caller holds lock on the page
  * @mem_cont: target memory controller
+ * @vm_flags: collect encountered vma->vm_flags who actually referenced the page
  *
  * Quick test_and_clear_referenced for all mappings to a page,
  * returns the number of ptes which referenced the page.
  */
-int page_referenced(struct page *page, int is_locked,
-			struct mem_cgroup *mem_cont)
+int page_referenced(struct page *page,
+		    int is_locked,
+		    struct mem_cgroup *mem_cont,
+		    unsigned long *vm_flags)
 {
 	int referenced = 0;
 
 	if (TestClearPageReferenced(page))
 		referenced++;
 
+	*vm_flags = 0;
 	if (page_mapped(page) && page->mapping) {
 		if (PageAnon(page))
-			referenced += page_referenced_anon(page, mem_cont);
+			referenced += page_referenced_anon(page, mem_cont,
+								vm_flags);
 		else if (is_locked)
-			referenced += page_referenced_file(page, mem_cont);
+			referenced += page_referenced_file(page, mem_cont,
+								vm_flags);
 		else if (!trylock_page(page))
 			referenced++;
 		else {
 			if (page->mapping)
-				referenced +=
-					page_referenced_file(page, mem_cont);
+				referenced += page_referenced_file(page,
+							mem_cont, vm_flags);
 			unlock_page(page);
 		}
 	}
@@ -1202,7 +1217,6 @@ int try_to_unmap(struct page *page, int migration)
 	return ret;
 }
 
-#ifdef CONFIG_UNEVICTABLE_LRU
 /**
  * try_to_munlock - try to munlock a page
  * @page: the page to be munlocked
@@ -1226,4 +1240,4 @@ int try_to_munlock(struct page *page)
 	else
 		return try_to_unmap_file(page, 1, 0);
 }
-#endif
+
diff --git a/mm/shmem.c b/mm/shmem.c
index 0132fbd45a2..e89d7ec18ed 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1097,7 +1097,7 @@ static int shmem_writepage(struct page *page, struct writeback_control *wbc)
 	shmem_swp_unmap(entry);
 unlock:
 	spin_unlock(&info->lock);
-	swap_free(swap);
+	swapcache_free(swap, NULL);
 redirty:
 	set_page_dirty(page);
 	if (wbc->for_reclaim)
@@ -2612,7 +2612,7 @@ int shmem_unuse(swp_entry_t entry, struct page *page)
  * @size: size to be set for the file
  * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
  */
-struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
+struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags)
 {
 	int error;
 	struct file *file;
diff --git a/mm/slab.c b/mm/slab.c
index 18e3164de09..f257d4dd474 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -114,6 +114,7 @@
 #include	<linux/rtmutex.h>
 #include	<linux/reciprocal_div.h>
 #include	<linux/debugobjects.h>
+#include	<linux/kmemcheck.h>
 
 #include	<asm/cacheflush.h>
 #include	<asm/tlbflush.h>
@@ -179,13 +180,13 @@
 			 SLAB_STORE_USER | \
 			 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
 			 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \
-			 SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE)
+			 SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE | SLAB_NOTRACK)
 #else
 # define CREATE_MASK	(SLAB_HWCACHE_ALIGN | \
 			 SLAB_CACHE_DMA | \
 			 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
 			 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \
-			 SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE)
+			 SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE | SLAB_NOTRACK)
 #endif
 
 /*
@@ -380,87 +381,6 @@ static void kmem_list3_init(struct kmem_list3 *parent)
 	MAKE_LIST((cachep), (&(ptr)->slabs_free), slabs_free, nodeid);	\
 	} while (0)
 
-/*
- * struct kmem_cache
- *
- * manages a cache.
- */
-
-struct kmem_cache {
-/* 1) per-cpu data, touched during every alloc/free */
-	struct array_cache *array[NR_CPUS];
-/* 2) Cache tunables. Protected by cache_chain_mutex */
-	unsigned int batchcount;
-	unsigned int limit;
-	unsigned int shared;
-
-	unsigned int buffer_size;
-	u32 reciprocal_buffer_size;
-/* 3) touched by every alloc & free from the backend */
-
-	unsigned int flags;		/* constant flags */
-	unsigned int num;		/* # of objs per slab */
-
-/* 4) cache_grow/shrink */
-	/* order of pgs per slab (2^n) */
-	unsigned int gfporder;
-
-	/* force GFP flags, e.g. GFP_DMA */
-	gfp_t gfpflags;
-
-	size_t colour;			/* cache colouring range */
-	unsigned int colour_off;	/* colour offset */
-	struct kmem_cache *slabp_cache;
-	unsigned int slab_size;
-	unsigned int dflags;		/* dynamic flags */
-
-	/* constructor func */
-	void (*ctor)(void *obj);
-
-/* 5) cache creation/removal */
-	const char *name;
-	struct list_head next;
-
-/* 6) statistics */
-#if STATS
-	unsigned long num_active;
-	unsigned long num_allocations;
-	unsigned long high_mark;
-	unsigned long grown;
-	unsigned long reaped;
-	unsigned long errors;
-	unsigned long max_freeable;
-	unsigned long node_allocs;
-	unsigned long node_frees;
-	unsigned long node_overflow;
-	atomic_t allochit;
-	atomic_t allocmiss;
-	atomic_t freehit;
-	atomic_t freemiss;
-#endif
-#if DEBUG
-	/*
-	 * If debugging is enabled, then the allocator can add additional
-	 * fields and/or padding to every object. buffer_size contains the total
-	 * object size including these internal fields, the following two
-	 * variables contain the offset to the user object and its size.
-	 */
-	int obj_offset;
-	int obj_size;
-#endif
-	/*
-	 * We put nodelists[] at the end of kmem_cache, because we want to size
-	 * this array to nr_node_ids slots instead of MAX_NUMNODES
-	 * (see kmem_cache_init())
-	 * We still use [MAX_NUMNODES] and not [1] or [0] because cache_cache
-	 * is statically defined, so we reserve the max number of nodes.
-	 */
-	struct kmem_list3 *nodelists[MAX_NUMNODES];
-	/*
-	 * Do not add fields after nodelists[]
-	 */
-};
-
 #define CFLGS_OFF_SLAB		(0x80000000UL)
 #define	OFF_SLAB(x)	((x)->flags & CFLGS_OFF_SLAB)
 
@@ -898,7 +818,6 @@ static void __slab_error(const char *function, struct kmem_cache *cachep,
   */
 
 static int use_alien_caches __read_mostly = 1;
-static int numa_platform __read_mostly = 1;
 static int __init noaliencache_setup(char *s)
 {
 	use_alien_caches = 0;
@@ -1457,10 +1376,8 @@ void __init kmem_cache_init(void)
 	int order;
 	int node;
 
-	if (num_possible_nodes() == 1) {
+	if (num_possible_nodes() == 1)
 		use_alien_caches = 0;
-		numa_platform = 0;
-	}
 
 	for (i = 0; i < NUM_INIT_LISTS; i++) {
 		kmem_list3_init(&initkmem_list3[i]);
@@ -1707,7 +1624,7 @@ static void *kmem_getpages(struct kmem_cache *cachep, gfp_t flags, int nodeid)
 	if (cachep->flags & SLAB_RECLAIM_ACCOUNT)
 		flags |= __GFP_RECLAIMABLE;
 
-	page = alloc_pages_node(nodeid, flags, cachep->gfporder);
+	page = alloc_pages_exact_node(nodeid, flags | __GFP_NOTRACK, cachep->gfporder);
 	if (!page)
 		return NULL;
 
@@ -1720,6 +1637,16 @@ static void *kmem_getpages(struct kmem_cache *cachep, gfp_t flags, int nodeid)
 			NR_SLAB_UNRECLAIMABLE, nr_pages);
 	for (i = 0; i < nr_pages; i++)
 		__SetPageSlab(page + i);
+
+	if (kmemcheck_enabled && !(cachep->flags & SLAB_NOTRACK)) {
+		kmemcheck_alloc_shadow(page, cachep->gfporder, flags, nodeid);
+
+		if (cachep->ctor)
+			kmemcheck_mark_uninitialized_pages(page, nr_pages);
+		else
+			kmemcheck_mark_unallocated_pages(page, nr_pages);
+	}
+
 	return page_address(page);
 }
 
@@ -1732,6 +1659,8 @@ static void kmem_freepages(struct kmem_cache *cachep, void *addr)
 	struct page *page = virt_to_page(addr);
 	const unsigned long nr_freed = i;
 
+	kmemcheck_free_shadow(page, cachep->gfporder);
+
 	if (cachep->flags & SLAB_RECLAIM_ACCOUNT)
 		sub_zone_page_state(page_zone(page),
 				NR_SLAB_RECLAIMABLE, nr_freed);
@@ -3261,7 +3190,7 @@ retry:
 		if (local_flags & __GFP_WAIT)
 			local_irq_enable();
 		kmem_flagcheck(cache, flags);
-		obj = kmem_getpages(cache, local_flags, -1);
+		obj = kmem_getpages(cache, local_flags, numa_node_id());
 		if (local_flags & __GFP_WAIT)
 			local_irq_disable();
 		if (obj) {
@@ -3407,6 +3336,9 @@ __cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid,
 	kmemleak_alloc_recursive(ptr, obj_size(cachep), 1, cachep->flags,
 				 flags);
 
+	if (likely(ptr))
+		kmemcheck_slab_alloc(cachep, flags, ptr, obj_size(cachep));
+
 	if (unlikely((flags & __GFP_ZERO) && ptr))
 		memset(ptr, 0, obj_size(cachep));
 
@@ -3467,6 +3399,9 @@ __cache_alloc(struct kmem_cache *cachep, gfp_t flags, void *caller)
 				 flags);
 	prefetchw(objp);
 
+	if (likely(objp))
+		kmemcheck_slab_alloc(cachep, flags, objp, obj_size(cachep));
+
 	if (unlikely((flags & __GFP_ZERO) && objp))
 		memset(objp, 0, obj_size(cachep));
 
@@ -3583,6 +3518,8 @@ static inline void __cache_free(struct kmem_cache *cachep, void *objp)
 	kmemleak_free_recursive(objp, cachep->flags);
 	objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
 
+	kmemcheck_slab_free(cachep, objp, obj_size(cachep));
+
 	/*
 	 * Skip calling cache_free_alien() when the platform is not numa.
 	 * This will avoid cache misses that happen while accessing slabp (which
@@ -3590,7 +3527,7 @@ static inline void __cache_free(struct kmem_cache *cachep, void *objp)
 	 * variable to skip the call, which is mostly likely to be present in
 	 * the cache.
 	 */
-	if (numa_platform && cache_free_alien(cachep, objp))
+	if (nr_online_nodes > 1 && cache_free_alien(cachep, objp))
 		return;
 
 	if (likely(ac->avail < ac->limit)) {
diff --git a/mm/slob.c b/mm/slob.c
index 12f26149992..64f6db1943b 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -46,7 +46,7 @@
  * NUMA support in SLOB is fairly simplistic, pushing most of the real
  * logic down to the page allocator, and simply doing the node accounting
  * on the upper levels. In the event that a node id is explicitly
- * provided, alloc_pages_node() with the specified node id is used
+ * provided, alloc_pages_exact_node() with the specified node id is used
  * instead. The common case (or when the node id isn't explicitly provided)
  * will default to the current node, as per numa_node_id().
  *
@@ -244,7 +244,7 @@ static void *slob_new_pages(gfp_t gfp, int order, int node)
 
 #ifdef CONFIG_NUMA
 	if (node != -1)
-		page = alloc_pages_node(node, gfp, order);
+		page = alloc_pages_exact_node(node, gfp, order);
 	else
 #endif
 		page = alloc_pages(gfp, order);
diff --git a/mm/slub.c b/mm/slub.c
index 30354bfeb43..2701419b0ad 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -18,6 +18,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/kmemtrace.h>
+#include <linux/kmemcheck.h>
 #include <linux/cpu.h>
 #include <linux/cpuset.h>
 #include <linux/kmemleak.h>
@@ -147,7 +148,7 @@
 		SLAB_TRACE | SLAB_DESTROY_BY_RCU | SLAB_NOLEAKTRACE)
 
 #define SLUB_MERGE_SAME (SLAB_DEBUG_FREE | SLAB_RECLAIM_ACCOUNT | \
-		SLAB_CACHE_DMA)
+		SLAB_CACHE_DMA | SLAB_NOTRACK)
 
 #ifndef ARCH_KMALLOC_MINALIGN
 #define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
@@ -1071,6 +1072,8 @@ static inline struct page *alloc_slab_page(gfp_t flags, int node,
 {
 	int order = oo_order(oo);
 
+	flags |= __GFP_NOTRACK;
+
 	if (node == -1)
 		return alloc_pages(flags, order);
 	else
@@ -1098,6 +1101,24 @@ static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node)
 
 		stat(get_cpu_slab(s, raw_smp_processor_id()), ORDER_FALLBACK);
 	}
+
+	if (kmemcheck_enabled
+		&& !(s->flags & (SLAB_NOTRACK | DEBUG_DEFAULT_FLAGS)))
+	{
+		int pages = 1 << oo_order(oo);
+
+		kmemcheck_alloc_shadow(page, oo_order(oo), flags, node);
+
+		/*
+		 * Objects from caches that have a constructor don't get
+		 * cleared when they're allocated, so we need to do it here.
+		 */
+		if (s->ctor)
+			kmemcheck_mark_uninitialized_pages(page, pages);
+		else
+			kmemcheck_mark_unallocated_pages(page, pages);
+	}
+
 	page->objects = oo_objects(oo);
 	mod_zone_page_state(page_zone(page),
 		(s->flags & SLAB_RECLAIM_ACCOUNT) ?
@@ -1171,6 +1192,8 @@ static void __free_slab(struct kmem_cache *s, struct page *page)
 		__ClearPageSlubDebug(page);
 	}
 
+	kmemcheck_free_shadow(page, compound_order(page));
+
 	mod_zone_page_state(page_zone(page),
 		(s->flags & SLAB_RECLAIM_ACCOUNT) ?
 		NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE,
@@ -1626,7 +1649,9 @@ static __always_inline void *slab_alloc(struct kmem_cache *s,
 	if (unlikely((gfpflags & __GFP_ZERO) && object))
 		memset(object, 0, objsize);
 
+	kmemcheck_slab_alloc(s, gfpflags, object, c->objsize);
 	kmemleak_alloc_recursive(object, objsize, 1, s->flags, gfpflags);
+
 	return object;
 }
 
@@ -1759,6 +1784,7 @@ static __always_inline void slab_free(struct kmem_cache *s,
 	kmemleak_free_recursive(x, s->flags);
 	local_irq_save(flags);
 	c = get_cpu_slab(s, smp_processor_id());
+	kmemcheck_slab_free(s, object, c->objsize);
 	debug_check_no_locks_freed(object, c->objsize);
 	if (!(s->flags & SLAB_DEBUG_OBJECTS))
 		debug_check_no_obj_freed(object, c->objsize);
@@ -2633,7 +2659,8 @@ static noinline struct kmem_cache *dma_kmalloc_cache(int index, gfp_t flags)
 
 	if (!s || !text || !kmem_cache_open(s, flags, text,
 			realsize, ARCH_KMALLOC_MINALIGN,
-			SLAB_CACHE_DMA|__SYSFS_ADD_DEFERRED, NULL)) {
+			SLAB_CACHE_DMA|SLAB_NOTRACK|__SYSFS_ADD_DEFERRED,
+			NULL)) {
 		kfree(s);
 		kfree(text);
 		goto unlock_out;
@@ -2727,9 +2754,10 @@ EXPORT_SYMBOL(__kmalloc);
 
 static void *kmalloc_large_node(size_t size, gfp_t flags, int node)
 {
-	struct page *page = alloc_pages_node(node, flags | __GFP_COMP,
-						get_order(size));
+	struct page *page;
 
+	flags |= __GFP_COMP | __GFP_NOTRACK;
+	page = alloc_pages_node(node, flags, get_order(size));
 	if (page)
 		return page_address(page);
 	else
@@ -3737,7 +3765,7 @@ static int list_locations(struct kmem_cache *s, char *buf,
 						 to_cpumask(l->cpus));
 		}
 
-		if (num_online_nodes() > 1 && !nodes_empty(l->nodes) &&
+		if (nr_online_nodes > 1 && !nodes_empty(l->nodes) &&
 				len < PAGE_SIZE - 60) {
 			len += sprintf(buf + len, " nodes=");
 			len += nodelist_scnprintf(buf + len, PAGE_SIZE - len - 50,
@@ -4412,6 +4440,8 @@ static char *create_unique_id(struct kmem_cache *s)
 		*p++ = 'a';
 	if (s->flags & SLAB_DEBUG_FREE)
 		*p++ = 'F';
+	if (!(s->flags & SLAB_NOTRACK))
+		*p++ = 't';
 	if (p != name + 1)
 		*p++ = '-';
 	p += sprintf(p, "%07d", s->size);
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 1416e7e9e02..42cd38eba79 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -124,7 +124,6 @@ void __delete_from_swap_cache(struct page *page)
 /**
  * add_to_swap - allocate swap space for a page
  * @page: page we want to move to swap
- * @gfp_mask: memory allocation flags
  *
  * Allocate swap space for the page and add the page to the
  * swap cache.  Caller needs to hold the page lock. 
@@ -162,11 +161,11 @@ int add_to_swap(struct page *page)
 			return 1;
 		case -EEXIST:
 			/* Raced with "speculative" read_swap_cache_async */
-			swap_free(entry);
+			swapcache_free(entry, NULL);
 			continue;
 		default:
 			/* -ENOMEM radix-tree allocation failure */
-			swap_free(entry);
+			swapcache_free(entry, NULL);
 			return 0;
 		}
 	}
@@ -188,8 +187,7 @@ void delete_from_swap_cache(struct page *page)
 	__delete_from_swap_cache(page);
 	spin_unlock_irq(&swapper_space.tree_lock);
 
-	mem_cgroup_uncharge_swapcache(page, entry);
-	swap_free(entry);
+	swapcache_free(entry, page);
 	page_cache_release(page);
 }
 
@@ -293,7 +291,10 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 		/*
 		 * Swap entry may have been freed since our caller observed it.
 		 */
-		if (!swap_duplicate(entry))
+		err = swapcache_prepare(entry);
+		if (err == -EEXIST) /* seems racy */
+			continue;
+		if (err)           /* swp entry is obsolete ? */
 			break;
 
 		/*
@@ -312,12 +313,12 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 			 * Initiate read into locked page and return.
 			 */
 			lru_cache_add_anon(new_page);
-			swap_readpage(NULL, new_page);
+			swap_readpage(new_page);
 			return new_page;
 		}
 		ClearPageSwapBacked(new_page);
 		__clear_page_locked(new_page);
-		swap_free(entry);
+		swapcache_free(entry, NULL);
 	} while (err != -ENOMEM);
 
 	if (new_page)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 312fafe0ab6..28faa01cf57 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -53,6 +53,59 @@ static struct swap_info_struct swap_info[MAX_SWAPFILES];
 
 static DEFINE_MUTEX(swapon_mutex);
 
+/* For reference count accounting in swap_map */
+/* enum for swap_map[] handling. internal use only */
+enum {
+	SWAP_MAP = 0,	/* ops for reference from swap users */
+	SWAP_CACHE,	/* ops for reference from swap cache */
+};
+
+static inline int swap_count(unsigned short ent)
+{
+	return ent & SWAP_COUNT_MASK;
+}
+
+static inline bool swap_has_cache(unsigned short ent)
+{
+	return !!(ent & SWAP_HAS_CACHE);
+}
+
+static inline unsigned short encode_swapmap(int count, bool has_cache)
+{
+	unsigned short ret = count;
+
+	if (has_cache)
+		return SWAP_HAS_CACHE | ret;
+	return ret;
+}
+
+/* returnes 1 if swap entry is freed */
+static int
+__try_to_reclaim_swap(struct swap_info_struct *si, unsigned long offset)
+{
+	int type = si - swap_info;
+	swp_entry_t entry = swp_entry(type, offset);
+	struct page *page;
+	int ret = 0;
+
+	page = find_get_page(&swapper_space, entry.val);
+	if (!page)
+		return 0;
+	/*
+	 * This function is called from scan_swap_map() and it's called
+	 * by vmscan.c at reclaiming pages. So, we hold a lock on a page, here.
+	 * We have to use trylock for avoiding deadlock. This is a special
+	 * case and you should use try_to_free_swap() with explicit lock_page()
+	 * in usual operations.
+	 */
+	if (trylock_page(page)) {
+		ret = try_to_free_swap(page);
+		unlock_page(page);
+	}
+	page_cache_release(page);
+	return ret;
+}
+
 /*
  * We need this because the bdev->unplug_fn can sleep and we cannot
  * hold swap_lock while calling the unplug_fn. And swap_lock
@@ -167,7 +220,8 @@ static int wait_for_discard(void *word)
 #define SWAPFILE_CLUSTER	256
 #define LATENCY_LIMIT		256
 
-static inline unsigned long scan_swap_map(struct swap_info_struct *si)
+static inline unsigned long scan_swap_map(struct swap_info_struct *si,
+					  int cache)
 {
 	unsigned long offset;
 	unsigned long scan_base;
@@ -273,6 +327,19 @@ checks:
 		goto no_page;
 	if (offset > si->highest_bit)
 		scan_base = offset = si->lowest_bit;
+
+	/* reuse swap entry of cache-only swap if not busy. */
+	if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+		int swap_was_freed;
+		spin_unlock(&swap_lock);
+		swap_was_freed = __try_to_reclaim_swap(si, offset);
+		spin_lock(&swap_lock);
+		/* entry was freed successfully, try to use this again */
+		if (swap_was_freed)
+			goto checks;
+		goto scan; /* check next one */
+	}
+
 	if (si->swap_map[offset])
 		goto scan;
 
@@ -285,7 +352,10 @@ checks:
 		si->lowest_bit = si->max;
 		si->highest_bit = 0;
 	}
-	si->swap_map[offset] = 1;
+	if (cache == SWAP_CACHE) /* at usual swap-out via vmscan.c */
+		si->swap_map[offset] = encode_swapmap(0, true);
+	else /* at suspend */
+		si->swap_map[offset] = encode_swapmap(1, false);
 	si->cluster_next = offset + 1;
 	si->flags -= SWP_SCANNING;
 
@@ -351,6 +421,10 @@ scan:
 			spin_lock(&swap_lock);
 			goto checks;
 		}
+		if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+			spin_lock(&swap_lock);
+			goto checks;
+		}
 		if (unlikely(--latency_ration < 0)) {
 			cond_resched();
 			latency_ration = LATENCY_LIMIT;
@@ -362,6 +436,10 @@ scan:
 			spin_lock(&swap_lock);
 			goto checks;
 		}
+		if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+			spin_lock(&swap_lock);
+			goto checks;
+		}
 		if (unlikely(--latency_ration < 0)) {
 			cond_resched();
 			latency_ration = LATENCY_LIMIT;
@@ -401,7 +479,8 @@ swp_entry_t get_swap_page(void)
 			continue;
 
 		swap_list.next = next;
-		offset = scan_swap_map(si);
+		/* This is called for allocating swap entry for cache */
+		offset = scan_swap_map(si, SWAP_CACHE);
 		if (offset) {
 			spin_unlock(&swap_lock);
 			return swp_entry(type, offset);
@@ -415,6 +494,7 @@ noswap:
 	return (swp_entry_t) {0};
 }
 
+/* The only caller of this function is now susupend routine */
 swp_entry_t get_swap_page_of_type(int type)
 {
 	struct swap_info_struct *si;
@@ -424,7 +504,8 @@ swp_entry_t get_swap_page_of_type(int type)
 	si = swap_info + type;
 	if (si->flags & SWP_WRITEOK) {
 		nr_swap_pages--;
-		offset = scan_swap_map(si);
+		/* This is called for allocating swap entry, not cache */
+		offset = scan_swap_map(si, SWAP_MAP);
 		if (offset) {
 			spin_unlock(&swap_lock);
 			return swp_entry(type, offset);
@@ -471,25 +552,38 @@ out:
 	return NULL;
 }
 
-static int swap_entry_free(struct swap_info_struct *p, swp_entry_t ent)
+static int swap_entry_free(struct swap_info_struct *p,
+			   swp_entry_t ent, int cache)
 {
 	unsigned long offset = swp_offset(ent);
-	int count = p->swap_map[offset];
-
-	if (count < SWAP_MAP_MAX) {
-		count--;
-		p->swap_map[offset] = count;
-		if (!count) {
-			if (offset < p->lowest_bit)
-				p->lowest_bit = offset;
-			if (offset > p->highest_bit)
-				p->highest_bit = offset;
-			if (p->prio > swap_info[swap_list.next].prio)
-				swap_list.next = p - swap_info;
-			nr_swap_pages++;
-			p->inuse_pages--;
-			mem_cgroup_uncharge_swap(ent);
+	int count = swap_count(p->swap_map[offset]);
+	bool has_cache;
+
+	has_cache = swap_has_cache(p->swap_map[offset]);
+
+	if (cache == SWAP_MAP) { /* dropping usage count of swap */
+		if (count < SWAP_MAP_MAX) {
+			count--;
+			p->swap_map[offset] = encode_swapmap(count, has_cache);
 		}
+	} else { /* dropping swap cache flag */
+		VM_BUG_ON(!has_cache);
+		p->swap_map[offset] = encode_swapmap(count, false);
+
+	}
+	/* return code. */
+	count = p->swap_map[offset];
+	/* free if no reference */
+	if (!count) {
+		if (offset < p->lowest_bit)
+			p->lowest_bit = offset;
+		if (offset > p->highest_bit)
+			p->highest_bit = offset;
+		if (p->prio > swap_info[swap_list.next].prio)
+			swap_list.next = p - swap_info;
+		nr_swap_pages++;
+		p->inuse_pages--;
+		mem_cgroup_uncharge_swap(ent);
 	}
 	return count;
 }
@@ -504,9 +598,26 @@ void swap_free(swp_entry_t entry)
 
 	p = swap_info_get(entry);
 	if (p) {
-		swap_entry_free(p, entry);
+		swap_entry_free(p, entry, SWAP_MAP);
+		spin_unlock(&swap_lock);
+	}
+}
+
+/*
+ * Called after dropping swapcache to decrease refcnt to swap entries.
+ */
+void swapcache_free(swp_entry_t entry, struct page *page)
+{
+	struct swap_info_struct *p;
+
+	if (page)
+		mem_cgroup_uncharge_swapcache(page, entry);
+	p = swap_info_get(entry);
+	if (p) {
+		swap_entry_free(p, entry, SWAP_CACHE);
 		spin_unlock(&swap_lock);
 	}
+	return;
 }
 
 /*
@@ -521,8 +632,7 @@ static inline int page_swapcount(struct page *page)
 	entry.val = page_private(page);
 	p = swap_info_get(entry);
 	if (p) {
-		/* Subtract the 1 for the swap cache itself */
-		count = p->swap_map[swp_offset(entry)] - 1;
+		count = swap_count(p->swap_map[swp_offset(entry)]);
 		spin_unlock(&swap_lock);
 	}
 	return count;
@@ -584,7 +694,7 @@ int free_swap_and_cache(swp_entry_t entry)
 
 	p = swap_info_get(entry);
 	if (p) {
-		if (swap_entry_free(p, entry) == 1) {
+		if (swap_entry_free(p, entry, SWAP_MAP) == SWAP_HAS_CACHE) {
 			page = find_get_page(&swapper_space, entry.val);
 			if (page && !trylock_page(page)) {
 				page_cache_release(page);
@@ -891,7 +1001,7 @@ static unsigned int find_next_to_unuse(struct swap_info_struct *si,
 			i = 1;
 		}
 		count = si->swap_map[i];
-		if (count && count != SWAP_MAP_BAD)
+		if (count && swap_count(count) != SWAP_MAP_BAD)
 			break;
 	}
 	return i;
@@ -995,13 +1105,13 @@ static int try_to_unuse(unsigned int type)
 		 */
 		shmem = 0;
 		swcount = *swap_map;
-		if (swcount > 1) {
+		if (swap_count(swcount)) {
 			if (start_mm == &init_mm)
 				shmem = shmem_unuse(entry, page);
 			else
 				retval = unuse_mm(start_mm, entry, page);
 		}
-		if (*swap_map > 1) {
+		if (swap_count(*swap_map)) {
 			int set_start_mm = (*swap_map >= swcount);
 			struct list_head *p = &start_mm->mmlist;
 			struct mm_struct *new_start_mm = start_mm;
@@ -1011,7 +1121,7 @@ static int try_to_unuse(unsigned int type)
 			atomic_inc(&new_start_mm->mm_users);
 			atomic_inc(&prev_mm->mm_users);
 			spin_lock(&mmlist_lock);
-			while (*swap_map > 1 && !retval && !shmem &&
+			while (swap_count(*swap_map) && !retval && !shmem &&
 					(p = p->next) != &start_mm->mmlist) {
 				mm = list_entry(p, struct mm_struct, mmlist);
 				if (!atomic_inc_not_zero(&mm->mm_users))
@@ -1023,14 +1133,16 @@ static int try_to_unuse(unsigned int type)
 				cond_resched();
 
 				swcount = *swap_map;
-				if (swcount <= 1)
+				if (!swap_count(swcount)) /* any usage ? */
 					;
 				else if (mm == &init_mm) {
 					set_start_mm = 1;
 					shmem = shmem_unuse(entry, page);
 				} else
 					retval = unuse_mm(mm, entry, page);
-				if (set_start_mm && *swap_map < swcount) {
+
+				if (set_start_mm &&
+				    swap_count(*swap_map) < swcount) {
 					mmput(new_start_mm);
 					atomic_inc(&mm->mm_users);
 					new_start_mm = mm;
@@ -1057,21 +1169,25 @@ static int try_to_unuse(unsigned int type)
 		}
 
 		/*
-		 * How could swap count reach 0x7fff when the maximum
-		 * pid is 0x7fff, and there's no way to repeat a swap
-		 * page within an mm (except in shmem, where it's the
-		 * shared object which takes the reference count)?
-		 * We believe SWAP_MAP_MAX cannot occur in Linux 2.4.
-		 *
+		 * How could swap count reach 0x7ffe ?
+		 * There's no way to repeat a swap page within an mm
+		 * (except in shmem, where it's the shared object which takes
+		 * the reference count)?
+		 * We believe SWAP_MAP_MAX cannot occur.(if occur, unsigned
+		 * short is too small....)
 		 * If that's wrong, then we should worry more about
 		 * exit_mmap() and do_munmap() cases described above:
 		 * we might be resetting SWAP_MAP_MAX too early here.
 		 * We know "Undead"s can happen, they're okay, so don't
 		 * report them; but do report if we reset SWAP_MAP_MAX.
 		 */
-		if (*swap_map == SWAP_MAP_MAX) {
+		/* We might release the lock_page() in unuse_mm(). */
+		if (!PageSwapCache(page) || page_private(page) != entry.val)
+			goto retry;
+
+		if (swap_count(*swap_map) == SWAP_MAP_MAX) {
 			spin_lock(&swap_lock);
-			*swap_map = 1;
+			*swap_map = encode_swapmap(0, true);
 			spin_unlock(&swap_lock);
 			reset_overflow = 1;
 		}
@@ -1089,7 +1205,8 @@ static int try_to_unuse(unsigned int type)
 		 * pages would be incorrect if swap supported "shared
 		 * private" pages, but they are handled by tmpfs files.
 		 */
-		if ((*swap_map > 1) && PageDirty(page) && PageSwapCache(page)) {
+		if (swap_count(*swap_map) &&
+		     PageDirty(page) && PageSwapCache(page)) {
 			struct writeback_control wbc = {
 				.sync_mode = WB_SYNC_NONE,
 			};
@@ -1116,6 +1233,7 @@ static int try_to_unuse(unsigned int type)
 		 * mark page dirty so shrink_page_list will preserve it.
 		 */
 		SetPageDirty(page);
+retry:
 		unlock_page(page);
 		page_cache_release(page);
 
@@ -1942,15 +2060,23 @@ void si_swapinfo(struct sysinfo *val)
  *
  * Note: if swap_map[] reaches SWAP_MAP_MAX the entries are treated as
  * "permanent", but will be reclaimed by the next swapoff.
+ * Returns error code in following case.
+ * - success -> 0
+ * - swp_entry is invalid -> EINVAL
+ * - swp_entry is migration entry -> EINVAL
+ * - swap-cache reference is requested but there is already one. -> EEXIST
+ * - swap-cache reference is requested but the entry is not used. -> ENOENT
  */
-int swap_duplicate(swp_entry_t entry)
+static int __swap_duplicate(swp_entry_t entry, bool cache)
 {
 	struct swap_info_struct * p;
 	unsigned long offset, type;
-	int result = 0;
+	int result = -EINVAL;
+	int count;
+	bool has_cache;
 
 	if (is_migration_entry(entry))
-		return 1;
+		return -EINVAL;
 
 	type = swp_type(entry);
 	if (type >= nr_swapfiles)
@@ -1959,17 +2085,40 @@ int swap_duplicate(swp_entry_t entry)
 	offset = swp_offset(entry);
 
 	spin_lock(&swap_lock);
-	if (offset < p->max && p->swap_map[offset]) {
-		if (p->swap_map[offset] < SWAP_MAP_MAX - 1) {
-			p->swap_map[offset]++;
-			result = 1;
-		} else if (p->swap_map[offset] <= SWAP_MAP_MAX) {
+
+	if (unlikely(offset >= p->max))
+		goto unlock_out;
+
+	count = swap_count(p->swap_map[offset]);
+	has_cache = swap_has_cache(p->swap_map[offset]);
+
+	if (cache == SWAP_CACHE) { /* called for swapcache/swapin-readahead */
+
+		/* set SWAP_HAS_CACHE if there is no cache and entry is used */
+		if (!has_cache && count) {
+			p->swap_map[offset] = encode_swapmap(count, true);
+			result = 0;
+		} else if (has_cache) /* someone added cache */
+			result = -EEXIST;
+		else if (!count) /* no users */
+			result = -ENOENT;
+
+	} else if (count || has_cache) {
+		if (count < SWAP_MAP_MAX - 1) {
+			p->swap_map[offset] = encode_swapmap(count + 1,
+							     has_cache);
+			result = 0;
+		} else if (count <= SWAP_MAP_MAX) {
 			if (swap_overflow++ < 5)
-				printk(KERN_WARNING "swap_dup: swap entry overflow\n");
-			p->swap_map[offset] = SWAP_MAP_MAX;
-			result = 1;
+				printk(KERN_WARNING
+				       "swap_dup: swap entry overflow\n");
+			p->swap_map[offset] = encode_swapmap(SWAP_MAP_MAX,
+							      has_cache);
+			result = 0;
 		}
-	}
+	} else
+		result = -ENOENT; /* unused swap entry */
+unlock_out:
 	spin_unlock(&swap_lock);
 out:
 	return result;
@@ -1978,6 +2127,27 @@ bad_file:
 	printk(KERN_ERR "swap_dup: %s%08lx\n", Bad_file, entry.val);
 	goto out;
 }
+/*
+ * increase reference count of swap entry by 1.
+ */
+void swap_duplicate(swp_entry_t entry)
+{
+	__swap_duplicate(entry, SWAP_MAP);
+}
+
+/*
+ * @entry: swap entry for which we allocate swap cache.
+ *
+ * Called when allocating swap cache for exising swap entry,
+ * This can return error codes. Returns 0 at success.
+ * -EBUSY means there is a swap cache.
+ * Note: return code is different from swap_duplicate().
+ */
+int swapcache_prepare(swp_entry_t entry)
+{
+	return __swap_duplicate(entry, SWAP_CACHE);
+}
+
 
 struct swap_info_struct *
 get_swap_info_struct(unsigned type)
@@ -2016,7 +2186,7 @@ int valid_swaphandles(swp_entry_t entry, unsigned long *offset)
 		/* Don't read in free or bad pages */
 		if (!si->swap_map[toff])
 			break;
-		if (si->swap_map[toff] == SWAP_MAP_BAD)
+		if (swap_count(si->swap_map[toff]) == SWAP_MAP_BAD)
 			break;
 	}
 	/* Count contiguous allocated slots below our target */
@@ -2024,7 +2194,7 @@ int valid_swaphandles(swp_entry_t entry, unsigned long *offset)
 		/* Don't read in free or bad pages */
 		if (!si->swap_map[toff])
 			break;
-		if (si->swap_map[toff] == SWAP_MAP_BAD)
+		if (swap_count(si->swap_map[toff]) == SWAP_MAP_BAD)
 			break;
 	}
 	spin_unlock(&swap_lock);
diff --git a/mm/truncate.c b/mm/truncate.c
index 12e1579f916..ccc3ecf7cb9 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -267,8 +267,21 @@ void truncate_inode_pages(struct address_space *mapping, loff_t lstart)
 }
 EXPORT_SYMBOL(truncate_inode_pages);
 
-unsigned long __invalidate_mapping_pages(struct address_space *mapping,
-				pgoff_t start, pgoff_t end, bool be_atomic)
+/**
+ * invalidate_mapping_pages - Invalidate all the unlocked pages of one inode
+ * @mapping: the address_space which holds the pages to invalidate
+ * @start: the offset 'from' which to invalidate
+ * @end: the offset 'to' which to invalidate (inclusive)
+ *
+ * This function only removes the unlocked pages, if you want to
+ * remove all the pages of one inode, you must call truncate_inode_pages.
+ *
+ * invalidate_mapping_pages() will not block on IO activity. It will not
+ * invalidate pages which are dirty, locked, under writeback or mapped into
+ * pagetables.
+ */
+unsigned long invalidate_mapping_pages(struct address_space *mapping,
+				       pgoff_t start, pgoff_t end)
 {
 	struct pagevec pvec;
 	pgoff_t next = start;
@@ -309,30 +322,10 @@ unlock:
 				break;
 		}
 		pagevec_release(&pvec);
-		if (likely(!be_atomic))
-			cond_resched();
+		cond_resched();
 	}
 	return ret;
 }
-
-/**
- * invalidate_mapping_pages - Invalidate all the unlocked pages of one inode
- * @mapping: the address_space which holds the pages to invalidate
- * @start: the offset 'from' which to invalidate
- * @end: the offset 'to' which to invalidate (inclusive)
- *
- * This function only removes the unlocked pages, if you want to
- * remove all the pages of one inode, you must call truncate_inode_pages.
- *
- * invalidate_mapping_pages() will not block on IO activity. It will not
- * invalidate pages which are dirty, locked, under writeback or mapped into
- * pagetables.
- */
-unsigned long invalidate_mapping_pages(struct address_space *mapping,
-				pgoff_t start, pgoff_t end)
-{
-	return __invalidate_mapping_pages(mapping, start, end, false);
-}
 EXPORT_SYMBOL(invalidate_mapping_pages);
 
 /*
diff --git a/mm/util.c b/mm/util.c
index abc65aa7cdf..d5d2213728c 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -233,13 +233,21 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
  * @pages:	array that receives pointers to the pages pinned.
  *		Should be at least nr_pages long.
  *
- * Attempt to pin user pages in memory without taking mm->mmap_sem.
- * If not successful, it will fall back to taking the lock and
- * calling get_user_pages().
- *
  * Returns number of pages pinned. This may be fewer than the number
  * requested. If nr_pages is 0 or negative, returns 0. If no pages
  * were pinned, returns -errno.
+ *
+ * get_user_pages_fast provides equivalent functionality to get_user_pages,
+ * operating on current and current->mm, with force=0 and vma=NULL. However
+ * unlike get_user_pages, it must be called without mmap_sem held.
+ *
+ * get_user_pages_fast may take mmap_sem and page table locks, so no
+ * assumptions can be made about lack of locking. get_user_pages_fast is to be
+ * implemented in a way that is advantageous (vs get_user_pages()) when the
+ * user memory area is already faulted in and present in ptes. However if the
+ * pages have to be faulted in, it may turn out to be slightly slower so
+ * callers need to carefully consider what to use. On many architectures,
+ * get_user_pages_fast simply falls back to get_user_pages.
  */
 int __attribute__((weak)) get_user_pages_fast(unsigned long start,
 				int nr_pages, int write, struct page **pages)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 95c08a8cc2b..4139aa52b94 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -470,8 +470,7 @@ static int __remove_mapping(struct address_space *mapping, struct page *page)
 		swp_entry_t swap = { .val = page_private(page) };
 		__delete_from_swap_cache(page);
 		spin_unlock_irq(&mapping->tree_lock);
-		mem_cgroup_uncharge_swapcache(page, swap);
-		swap_free(swap);
+		swapcache_free(swap, page);
 	} else {
 		__remove_from_page_cache(page);
 		spin_unlock_irq(&mapping->tree_lock);
@@ -514,7 +513,6 @@ int remove_mapping(struct address_space *mapping, struct page *page)
  *
  * lru_lock must not be held, interrupts must be enabled.
  */
-#ifdef CONFIG_UNEVICTABLE_LRU
 void putback_lru_page(struct page *page)
 {
 	int lru;
@@ -568,20 +566,6 @@ redo:
 	put_page(page);		/* drop ref from isolate */
 }
 
-#else /* CONFIG_UNEVICTABLE_LRU */
-
-void putback_lru_page(struct page *page)
-{
-	int lru;
-	VM_BUG_ON(PageLRU(page));
-
-	lru = !!TestClearPageActive(page) + page_is_file_cache(page);
-	lru_cache_add_lru(page, lru);
-	put_page(page);
-}
-#endif /* CONFIG_UNEVICTABLE_LRU */
-
-
 /*
  * shrink_page_list() returns the number of reclaimed pages
  */
@@ -593,6 +577,7 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 	struct pagevec freed_pvec;
 	int pgactivate = 0;
 	unsigned long nr_reclaimed = 0;
+	unsigned long vm_flags;
 
 	cond_resched();
 
@@ -643,7 +628,8 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 				goto keep_locked;
 		}
 
-		referenced = page_referenced(page, 1, sc->mem_cgroup);
+		referenced = page_referenced(page, 1,
+						sc->mem_cgroup, &vm_flags);
 		/* In active use or really unfreeable?  Activate it. */
 		if (sc->order <= PAGE_ALLOC_COSTLY_ORDER &&
 					referenced && page_mapping_inuse(page))
@@ -943,18 +929,10 @@ static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
 			/* Check that we have not crossed a zone boundary. */
 			if (unlikely(page_zone_id(cursor_page) != zone_id))
 				continue;
-			switch (__isolate_lru_page(cursor_page, mode, file)) {
-			case 0:
+			if (__isolate_lru_page(cursor_page, mode, file) == 0) {
 				list_move(&cursor_page->lru, dst);
 				nr_taken++;
 				scan++;
-				break;
-
-			case -EBUSY:
-				/* else it is being freed elsewhere */
-				list_move(&cursor_page->lru, src);
-			default:
-				break;	/* ! on LRU or wrong list */
 			}
 		}
 	}
@@ -1061,6 +1039,19 @@ static unsigned long shrink_inactive_list(unsigned long max_scan,
 	unsigned long nr_scanned = 0;
 	unsigned long nr_reclaimed = 0;
 	struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
+	int lumpy_reclaim = 0;
+
+	/*
+	 * If we need a large contiguous chunk of memory, or have
+	 * trouble getting a small set of contiguous pages, we
+	 * will reclaim both active and inactive pages.
+	 *
+	 * We use the same threshold as pageout congestion_wait below.
+	 */
+	if (sc->order > PAGE_ALLOC_COSTLY_ORDER)
+		lumpy_reclaim = 1;
+	else if (sc->order && priority < DEF_PRIORITY - 2)
+		lumpy_reclaim = 1;
 
 	pagevec_init(&pvec, 1);
 
@@ -1073,19 +1064,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan,
 		unsigned long nr_freed;
 		unsigned long nr_active;
 		unsigned int count[NR_LRU_LISTS] = { 0, };
-		int mode = ISOLATE_INACTIVE;
-
-		/*
-		 * If we need a large contiguous chunk of memory, or have
-		 * trouble getting a small set of contiguous pages, we
-		 * will reclaim both active and inactive pages.
-		 *
-		 * We use the same threshold as pageout congestion_wait below.
-		 */
-		if (sc->order > PAGE_ALLOC_COSTLY_ORDER)
-			mode = ISOLATE_BOTH;
-		else if (sc->order && priority < DEF_PRIORITY - 2)
-			mode = ISOLATE_BOTH;
+		int mode = lumpy_reclaim ? ISOLATE_BOTH : ISOLATE_INACTIVE;
 
 		nr_taken = sc->isolate_pages(sc->swap_cluster_max,
 			     &page_list, &nr_scan, sc->order, mode,
@@ -1122,7 +1101,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan,
 		 * but that should be acceptable to the caller
 		 */
 		if (nr_freed < nr_taken && !current_is_kswapd() &&
-					sc->order > PAGE_ALLOC_COSTLY_ORDER) {
+		    lumpy_reclaim) {
 			congestion_wait(WRITE, HZ/10);
 
 			/*
@@ -1217,18 +1196,54 @@ static inline void note_zone_scanning_priority(struct zone *zone, int priority)
  * But we had to alter page->flags anyway.
  */
 
+static void move_active_pages_to_lru(struct zone *zone,
+				     struct list_head *list,
+				     enum lru_list lru)
+{
+	unsigned long pgmoved = 0;
+	struct pagevec pvec;
+	struct page *page;
+
+	pagevec_init(&pvec, 1);
+
+	while (!list_empty(list)) {
+		page = lru_to_page(list);
+		prefetchw_prev_lru_page(page, list, flags);
+
+		VM_BUG_ON(PageLRU(page));
+		SetPageLRU(page);
+
+		VM_BUG_ON(!PageActive(page));
+		if (!is_active_lru(lru))
+			ClearPageActive(page);	/* we are de-activating */
+
+		list_move(&page->lru, &zone->lru[lru].list);
+		mem_cgroup_add_lru_list(page, lru);
+		pgmoved++;
+
+		if (!pagevec_add(&pvec, page) || list_empty(list)) {
+			spin_unlock_irq(&zone->lru_lock);
+			if (buffer_heads_over_limit)
+				pagevec_strip(&pvec);
+			__pagevec_release(&pvec);
+			spin_lock_irq(&zone->lru_lock);
+		}
+	}
+	__mod_zone_page_state(zone, NR_LRU_BASE + lru, pgmoved);
+	if (!is_active_lru(lru))
+		__count_vm_events(PGDEACTIVATE, pgmoved);
+}
 
 static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
 			struct scan_control *sc, int priority, int file)
 {
 	unsigned long pgmoved;
-	int pgdeactivate = 0;
 	unsigned long pgscanned;
+	unsigned long vm_flags;
 	LIST_HEAD(l_hold);	/* The pages which were snipped off */
+	LIST_HEAD(l_active);
 	LIST_HEAD(l_inactive);
 	struct page *page;
-	struct pagevec pvec;
-	enum lru_list lru;
 	struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
 
 	lru_add_drain();
@@ -1245,13 +1260,14 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
 	}
 	reclaim_stat->recent_scanned[!!file] += pgmoved;
 
+	__count_zone_vm_events(PGREFILL, zone, pgscanned);
 	if (file)
 		__mod_zone_page_state(zone, NR_ACTIVE_FILE, -pgmoved);
 	else
 		__mod_zone_page_state(zone, NR_ACTIVE_ANON, -pgmoved);
 	spin_unlock_irq(&zone->lru_lock);
 
-	pgmoved = 0;
+	pgmoved = 0;  /* count referenced (mapping) mapped pages */
 	while (!list_empty(&l_hold)) {
 		cond_resched();
 		page = lru_to_page(&l_hold);
@@ -1264,58 +1280,44 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
 
 		/* page_referenced clears PageReferenced */
 		if (page_mapping_inuse(page) &&
-		    page_referenced(page, 0, sc->mem_cgroup))
+		    page_referenced(page, 0, sc->mem_cgroup, &vm_flags)) {
 			pgmoved++;
+			/*
+			 * Identify referenced, file-backed active pages and
+			 * give them one more trip around the active list. So
+			 * that executable code get better chances to stay in
+			 * memory under moderate memory pressure.  Anon pages
+			 * are not likely to be evicted by use-once streaming
+			 * IO, plus JVM can create lots of anon VM_EXEC pages,
+			 * so we ignore them here.
+			 */
+			if ((vm_flags & VM_EXEC) && !PageAnon(page)) {
+				list_add(&page->lru, &l_active);
+				continue;
+			}
+		}
 
 		list_add(&page->lru, &l_inactive);
 	}
 
 	/*
-	 * Move the pages to the [file or anon] inactive list.
+	 * Move pages back to the lru list.
 	 */
-	pagevec_init(&pvec, 1);
-	lru = LRU_BASE + file * LRU_FILE;
-
 	spin_lock_irq(&zone->lru_lock);
 	/*
-	 * Count referenced pages from currently used mappings as
-	 * rotated, even though they are moved to the inactive list.
-	 * This helps balance scan pressure between file and anonymous
-	 * pages in get_scan_ratio.
+	 * Count referenced pages from currently used mappings as rotated,
+	 * even though only some of them are actually re-activated.  This
+	 * helps balance scan pressure between file and anonymous pages in
+	 * get_scan_ratio.
 	 */
 	reclaim_stat->recent_rotated[!!file] += pgmoved;
 
-	pgmoved = 0;
-	while (!list_empty(&l_inactive)) {
-		page = lru_to_page(&l_inactive);
-		prefetchw_prev_lru_page(page, &l_inactive, flags);
-		VM_BUG_ON(PageLRU(page));
-		SetPageLRU(page);
-		VM_BUG_ON(!PageActive(page));
-		ClearPageActive(page);
+	move_active_pages_to_lru(zone, &l_active,
+						LRU_ACTIVE + file * LRU_FILE);
+	move_active_pages_to_lru(zone, &l_inactive,
+						LRU_BASE   + file * LRU_FILE);
 
-		list_move(&page->lru, &zone->lru[lru].list);
-		mem_cgroup_add_lru_list(page, lru);
-		pgmoved++;
-		if (!pagevec_add(&pvec, page)) {
-			__mod_zone_page_state(zone, NR_LRU_BASE + lru, pgmoved);
-			spin_unlock_irq(&zone->lru_lock);
-			pgdeactivate += pgmoved;
-			pgmoved = 0;
-			if (buffer_heads_over_limit)
-				pagevec_strip(&pvec);
-			__pagevec_release(&pvec);
-			spin_lock_irq(&zone->lru_lock);
-		}
-	}
-	__mod_zone_page_state(zone, NR_LRU_BASE + lru, pgmoved);
-	pgdeactivate += pgmoved;
-	__count_zone_vm_events(PGREFILL, zone, pgscanned);
-	__count_vm_events(PGDEACTIVATE, pgdeactivate);
 	spin_unlock_irq(&zone->lru_lock);
-	if (buffer_heads_over_limit)
-		pagevec_strip(&pvec);
-	pagevec_release(&pvec);
 }
 
 static int inactive_anon_is_low_global(struct zone *zone)
@@ -1350,12 +1352,48 @@ static int inactive_anon_is_low(struct zone *zone, struct scan_control *sc)
 	return low;
 }
 
+static int inactive_file_is_low_global(struct zone *zone)
+{
+	unsigned long active, inactive;
+
+	active = zone_page_state(zone, NR_ACTIVE_FILE);
+	inactive = zone_page_state(zone, NR_INACTIVE_FILE);
+
+	return (active > inactive);
+}
+
+/**
+ * inactive_file_is_low - check if file pages need to be deactivated
+ * @zone: zone to check
+ * @sc:   scan control of this context
+ *
+ * When the system is doing streaming IO, memory pressure here
+ * ensures that active file pages get deactivated, until more
+ * than half of the file pages are on the inactive list.
+ *
+ * Once we get to that situation, protect the system's working
+ * set from being evicted by disabling active file page aging.
+ *
+ * This uses a different ratio than the anonymous pages, because
+ * the page cache uses a use-once replacement algorithm.
+ */
+static int inactive_file_is_low(struct zone *zone, struct scan_control *sc)
+{
+	int low;
+
+	if (scanning_global_lru(sc))
+		low = inactive_file_is_low_global(zone);
+	else
+		low = mem_cgroup_inactive_file_is_low(sc->mem_cgroup);
+	return low;
+}
+
 static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
 	struct zone *zone, struct scan_control *sc, int priority)
 {
 	int file = is_file_lru(lru);
 
-	if (lru == LRU_ACTIVE_FILE) {
+	if (lru == LRU_ACTIVE_FILE && inactive_file_is_low(zone, sc)) {
 		shrink_active_list(nr_to_scan, zone, sc, priority, file);
 		return 0;
 	}
@@ -1384,13 +1422,6 @@ static void get_scan_ratio(struct zone *zone, struct scan_control *sc,
 	unsigned long ap, fp;
 	struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
 
-	/* If we have no swap space, do not bother scanning anon pages. */
-	if (!sc->may_swap || (nr_swap_pages <= 0)) {
-		percent[0] = 0;
-		percent[1] = 100;
-		return;
-	}
-
 	anon  = zone_nr_pages(zone, sc, LRU_ACTIVE_ANON) +
 		zone_nr_pages(zone, sc, LRU_INACTIVE_ANON);
 	file  = zone_nr_pages(zone, sc, LRU_ACTIVE_FILE) +
@@ -1400,7 +1431,7 @@ static void get_scan_ratio(struct zone *zone, struct scan_control *sc,
 		free  = zone_page_state(zone, NR_FREE_PAGES);
 		/* If we have very few page cache pages,
 		   force-scan anon pages. */
-		if (unlikely(file + free <= zone->pages_high)) {
+		if (unlikely(file + free <= high_wmark_pages(zone))) {
 			percent[0] = 100;
 			percent[1] = 0;
 			return;
@@ -1455,6 +1486,26 @@ static void get_scan_ratio(struct zone *zone, struct scan_control *sc,
 	percent[1] = 100 - percent[0];
 }
 
+/*
+ * Smallish @nr_to_scan's are deposited in @nr_saved_scan,
+ * until we collected @swap_cluster_max pages to scan.
+ */
+static unsigned long nr_scan_try_batch(unsigned long nr_to_scan,
+				       unsigned long *nr_saved_scan,
+				       unsigned long swap_cluster_max)
+{
+	unsigned long nr;
+
+	*nr_saved_scan += nr_to_scan;
+	nr = *nr_saved_scan;
+
+	if (nr >= swap_cluster_max)
+		*nr_saved_scan = 0;
+	else
+		nr = 0;
+
+	return nr;
+}
 
 /*
  * This is a basic per-zone page freer.  Used by both kswapd and direct reclaim.
@@ -1468,26 +1519,30 @@ static void shrink_zone(int priority, struct zone *zone,
 	enum lru_list l;
 	unsigned long nr_reclaimed = sc->nr_reclaimed;
 	unsigned long swap_cluster_max = sc->swap_cluster_max;
+	int noswap = 0;
 
-	get_scan_ratio(zone, sc, percent);
+	/* If we have no swap space, do not bother scanning anon pages. */
+	if (!sc->may_swap || (nr_swap_pages <= 0)) {
+		noswap = 1;
+		percent[0] = 0;
+		percent[1] = 100;
+	} else
+		get_scan_ratio(zone, sc, percent);
 
 	for_each_evictable_lru(l) {
 		int file = is_file_lru(l);
 		unsigned long scan;
 
 		scan = zone_nr_pages(zone, sc, l);
-		if (priority) {
+		if (priority || noswap) {
 			scan >>= priority;
 			scan = (scan * percent[file]) / 100;
 		}
-		if (scanning_global_lru(sc)) {
-			zone->lru[l].nr_scan += scan;
-			nr[l] = zone->lru[l].nr_scan;
-			if (nr[l] >= swap_cluster_max)
-				zone->lru[l].nr_scan = 0;
-			else
-				nr[l] = 0;
-		} else
+		if (scanning_global_lru(sc))
+			nr[l] = nr_scan_try_batch(scan,
+						  &zone->lru[l].nr_saved_scan,
+						  swap_cluster_max);
+		else
 			nr[l] = scan;
 	}
 
@@ -1521,7 +1576,7 @@ static void shrink_zone(int priority, struct zone *zone,
 	 * Even if we did not try to evict anon pages at all, we want to
 	 * rebalance the anon lru active/inactive ratio.
 	 */
-	if (inactive_anon_is_low(zone, sc))
+	if (inactive_anon_is_low(zone, sc) && nr_swap_pages > 0)
 		shrink_active_list(SWAP_CLUSTER_MAX, zone, sc, priority, 0);
 
 	throttle_vm_writeout(sc->gfp_mask);
@@ -1532,11 +1587,13 @@ static void shrink_zone(int priority, struct zone *zone,
  * try to reclaim pages from zones which will satisfy the caller's allocation
  * request.
  *
- * We reclaim from a zone even if that zone is over pages_high.  Because:
+ * We reclaim from a zone even if that zone is over high_wmark_pages(zone).
+ * Because:
  * a) The caller may be trying to free *extra* pages to satisfy a higher-order
  *    allocation or
- * b) The zones may be over pages_high but they must go *over* pages_high to
- *    satisfy the `incremental min' zone defense algorithm.
+ * b) The target zone may be at high_wmark_pages(zone) but the lower zones
+ *    must go *over* high_wmark_pages(zone) to satisfy the `incremental min'
+ *    zone defense algorithm.
  *
  * If a zone is deemed to be full of pinned pages then just give it a light
  * scan then give up on it.
@@ -1742,7 +1799,7 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
 
 /*
  * For kswapd, balance_pgdat() will work across all this node's zones until
- * they are all at pages_high.
+ * they are all at high_wmark_pages(zone).
  *
  * Returns the number of pages which were actually freed.
  *
@@ -1755,11 +1812,11 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
  * the zone for when the problem goes away.
  *
  * kswapd scans the zones in the highmem->normal->dma direction.  It skips
- * zones which have free_pages > pages_high, but once a zone is found to have
- * free_pages <= pages_high, we scan that zone and the lower zones regardless
- * of the number of free pages in the lower zones.  This interoperates with
- * the page allocator fallback scheme to ensure that aging of pages is balanced
- * across the zones.
+ * zones which have free_pages > high_wmark_pages(zone), but once a zone is
+ * found to have free_pages <= high_wmark_pages(zone), we scan that zone and the
+ * lower zones regardless of the number of free pages in the lower zones. This
+ * interoperates with the page allocator fallback scheme to ensure that aging
+ * of pages is balanced across the zones.
  */
 static unsigned long balance_pgdat(pg_data_t *pgdat, int order)
 {
@@ -1780,7 +1837,8 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order)
 	};
 	/*
 	 * temp_priority is used to remember the scanning priority at which
-	 * this zone was successfully refilled to free_pages == pages_high.
+	 * this zone was successfully refilled to
+	 * free_pages == high_wmark_pages(zone).
 	 */
 	int temp_priority[MAX_NR_ZONES];
 
@@ -1825,8 +1883,8 @@ loop_again:
 				shrink_active_list(SWAP_CLUSTER_MAX, zone,
 							&sc, priority, 0);
 
-			if (!zone_watermark_ok(zone, order, zone->pages_high,
-					       0, 0)) {
+			if (!zone_watermark_ok(zone, order,
+					high_wmark_pages(zone), 0, 0)) {
 				end_zone = i;
 				break;
 			}
@@ -1860,8 +1918,8 @@ loop_again:
 					priority != DEF_PRIORITY)
 				continue;
 
-			if (!zone_watermark_ok(zone, order, zone->pages_high,
-					       end_zone, 0))
+			if (!zone_watermark_ok(zone, order,
+					high_wmark_pages(zone), end_zone, 0))
 				all_zones_ok = 0;
 			temp_priority[i] = priority;
 			sc.nr_scanned = 0;
@@ -1870,8 +1928,8 @@ loop_again:
 			 * We put equal pressure on every zone, unless one
 			 * zone has way too many pages free already.
 			 */
-			if (!zone_watermark_ok(zone, order, 8*zone->pages_high,
-						end_zone, 0))
+			if (!zone_watermark_ok(zone, order,
+					8*high_wmark_pages(zone), end_zone, 0))
 				shrink_zone(priority, zone, &sc);
 			reclaim_state->reclaimed_slab = 0;
 			nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL,
@@ -2037,7 +2095,7 @@ void wakeup_kswapd(struct zone *zone, int order)
 		return;
 
 	pgdat = zone->zone_pgdat;
-	if (zone_watermark_ok(zone, order, zone->pages_low, 0, 0))
+	if (zone_watermark_ok(zone, order, low_wmark_pages(zone), 0, 0))
 		return;
 	if (pgdat->kswapd_max_order < order)
 		pgdat->kswapd_max_order = order;
@@ -2084,11 +2142,11 @@ static void shrink_all_zones(unsigned long nr_pages, int prio,
 						l == LRU_ACTIVE_FILE))
 				continue;
 
-			zone->lru[l].nr_scan += (lru_pages >> prio) + 1;
-			if (zone->lru[l].nr_scan >= nr_pages || pass > 3) {
+			zone->lru[l].nr_saved_scan += (lru_pages >> prio) + 1;
+			if (zone->lru[l].nr_saved_scan >= nr_pages || pass > 3) {
 				unsigned long nr_to_scan;
 
-				zone->lru[l].nr_scan = 0;
+				zone->lru[l].nr_saved_scan = 0;
 				nr_to_scan = min(nr_pages, lru_pages);
 				nr_reclaimed += shrink_list(l, nr_to_scan, zone,
 								sc, prio);
@@ -2290,6 +2348,48 @@ int sysctl_min_unmapped_ratio = 1;
  */
 int sysctl_min_slab_ratio = 5;
 
+static inline unsigned long zone_unmapped_file_pages(struct zone *zone)
+{
+	unsigned long file_mapped = zone_page_state(zone, NR_FILE_MAPPED);
+	unsigned long file_lru = zone_page_state(zone, NR_INACTIVE_FILE) +
+		zone_page_state(zone, NR_ACTIVE_FILE);
+
+	/*
+	 * It's possible for there to be more file mapped pages than
+	 * accounted for by the pages on the file LRU lists because
+	 * tmpfs pages accounted for as ANON can also be FILE_MAPPED
+	 */
+	return (file_lru > file_mapped) ? (file_lru - file_mapped) : 0;
+}
+
+/* Work out how many page cache pages we can reclaim in this reclaim_mode */
+static long zone_pagecache_reclaimable(struct zone *zone)
+{
+	long nr_pagecache_reclaimable;
+	long delta = 0;
+
+	/*
+	 * If RECLAIM_SWAP is set, then all file pages are considered
+	 * potentially reclaimable. Otherwise, we have to worry about
+	 * pages like swapcache and zone_unmapped_file_pages() provides
+	 * a better estimate
+	 */
+	if (zone_reclaim_mode & RECLAIM_SWAP)
+		nr_pagecache_reclaimable = zone_page_state(zone, NR_FILE_PAGES);
+	else
+		nr_pagecache_reclaimable = zone_unmapped_file_pages(zone);
+
+	/* If we can't clean pages, remove dirty pages from consideration */
+	if (!(zone_reclaim_mode & RECLAIM_WRITE))
+		delta += zone_page_state(zone, NR_FILE_DIRTY);
+
+	/* Watch for any possible underflows due to delta */
+	if (unlikely(delta > nr_pagecache_reclaimable))
+		delta = nr_pagecache_reclaimable;
+
+	return nr_pagecache_reclaimable - delta;
+}
+
 /*
  * Try to free up some pages from this zone through reclaim.
  */
@@ -2324,9 +2424,7 @@ static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
 	reclaim_state.reclaimed_slab = 0;
 	p->reclaim_state = &reclaim_state;
 
-	if (zone_page_state(zone, NR_FILE_PAGES) -
-		zone_page_state(zone, NR_FILE_MAPPED) >
-		zone->min_unmapped_pages) {
+	if (zone_pagecache_reclaimable(zone) > zone->min_unmapped_pages) {
 		/*
 		 * Free memory by calling shrink zone with increasing
 		 * priorities until we have enough memory freed.
@@ -2384,20 +2482,18 @@ int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
 	 * if less than a specified percentage of the zone is used by
 	 * unmapped file backed pages.
 	 */
-	if (zone_page_state(zone, NR_FILE_PAGES) -
-	    zone_page_state(zone, NR_FILE_MAPPED) <= zone->min_unmapped_pages
-	    && zone_page_state(zone, NR_SLAB_RECLAIMABLE)
-			<= zone->min_slab_pages)
-		return 0;
+	if (zone_pagecache_reclaimable(zone) <= zone->min_unmapped_pages &&
+	    zone_page_state(zone, NR_SLAB_RECLAIMABLE) <= zone->min_slab_pages)
+		return ZONE_RECLAIM_FULL;
 
 	if (zone_is_all_unreclaimable(zone))
-		return 0;
+		return ZONE_RECLAIM_FULL;
 
 	/*
 	 * Do not scan if the allocation should not be delayed.
 	 */
 	if (!(gfp_mask & __GFP_WAIT) || (current->flags & PF_MEMALLOC))
-			return 0;
+		return ZONE_RECLAIM_NOSCAN;
 
 	/*
 	 * Only run zone reclaim on the local zone or on zones that do not
@@ -2407,18 +2503,21 @@ int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
 	 */
 	node_id = zone_to_nid(zone);
 	if (node_state(node_id, N_CPU) && node_id != numa_node_id())
-		return 0;
+		return ZONE_RECLAIM_NOSCAN;
 
 	if (zone_test_and_set_flag(zone, ZONE_RECLAIM_LOCKED))
-		return 0;
+		return ZONE_RECLAIM_NOSCAN;
+
 	ret = __zone_reclaim(zone, gfp_mask, order);
 	zone_clear_flag(zone, ZONE_RECLAIM_LOCKED);
 
+	if (!ret)
+		count_vm_event(PGSCAN_ZONE_RECLAIM_FAILED);
+
 	return ret;
 }
 #endif
 
-#ifdef CONFIG_UNEVICTABLE_LRU
 /*
  * page_evictable - test whether a page is evictable
  * @page: the page to test
@@ -2665,4 +2764,3 @@ void scan_unevictable_unregister_node(struct node *node)
 	sysdev_remove_file(&node->sysdev, &attr_scan_unevictable_pages);
 }
 
-#endif
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 74d66dba0cb..138bed53706 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -629,10 +629,8 @@ static const char * const vmstat_text[] = {
 	"nr_active_anon",
 	"nr_inactive_file",
 	"nr_active_file",
-#ifdef CONFIG_UNEVICTABLE_LRU
 	"nr_unevictable",
 	"nr_mlock",
-#endif
 	"nr_anon_pages",
 	"nr_mapped",
 	"nr_file_pages",
@@ -675,6 +673,9 @@ static const char * const vmstat_text[] = {
 	TEXTS_FOR_ZONES("pgscan_kswapd")
 	TEXTS_FOR_ZONES("pgscan_direct")
 
+#ifdef CONFIG_NUMA
+	"zone_reclaim_failed",
+#endif
 	"pginodesteal",
 	"slabs_scanned",
 	"kswapd_steal",
@@ -687,7 +688,6 @@ static const char * const vmstat_text[] = {
 	"htlb_buddy_alloc_success",
 	"htlb_buddy_alloc_fail",
 #endif
-#ifdef CONFIG_UNEVICTABLE_LRU
 	"unevictable_pgs_culled",
 	"unevictable_pgs_scanned",
 	"unevictable_pgs_rescued",
@@ -697,7 +697,6 @@ static const char * const vmstat_text[] = {
 	"unevictable_pgs_stranded",
 	"unevictable_pgs_mlockfreed",
 #endif
-#endif
 };
 
 static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
@@ -710,18 +709,14 @@ static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
 		   "\n        min      %lu"
 		   "\n        low      %lu"
 		   "\n        high     %lu"
-		   "\n        scanned  %lu (aa: %lu ia: %lu af: %lu if: %lu)"
+		   "\n        scanned  %lu"
 		   "\n        spanned  %lu"
 		   "\n        present  %lu",
 		   zone_page_state(zone, NR_FREE_PAGES),
-		   zone->pages_min,
-		   zone->pages_low,
-		   zone->pages_high,
+		   min_wmark_pages(zone),
+		   low_wmark_pages(zone),
+		   high_wmark_pages(zone),
 		   zone->pages_scanned,
-		   zone->lru[LRU_ACTIVE_ANON].nr_scan,
-		   zone->lru[LRU_INACTIVE_ANON].nr_scan,
-		   zone->lru[LRU_ACTIVE_FILE].nr_scan,
-		   zone->lru[LRU_INACTIVE_FILE].nr_scan,
 		   zone->spanned_pages,
 		   zone->present_pages);
 
diff --git a/net/802/fddi.c b/net/802/fddi.c
index 539e6064e6d..3ef0ab0a543 100644
--- a/net/802/fddi.c
+++ b/net/802/fddi.c
@@ -185,10 +185,6 @@ static const struct header_ops fddi_header_ops = {
 static void fddi_setup(struct net_device *dev)
 {
 	dev->header_ops		= &fddi_header_ops;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->change_mtu		= fddi_change_mtu,
-#endif
-
 	dev->type		= ARPHRD_FDDI;
 	dev->hard_header_len	= FDDI_K_SNAP_HLEN+3;	/* Assume 802.2 SNAP hdr len + 3 pad bytes */
 	dev->mtu		= FDDI_K_SNAP_DLEN;	/* Assume max payload of 802.2 SNAP frame */
diff --git a/net/802/hippi.c b/net/802/hippi.c
index 313b9ebf92e..cd3e8e92952 100644
--- a/net/802/hippi.c
+++ b/net/802/hippi.c
@@ -193,11 +193,6 @@ static const struct header_ops hippi_header_ops = {
 
 static void hippi_setup(struct net_device *dev)
 {
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->change_mtu			= hippi_change_mtu;
-	dev->set_mac_address 		= hippi_mac_addr;
-	dev->neigh_setup 		= hippi_neigh_setup_dev;
-#endif
 	dev->header_ops			= &hippi_header_ops;
 
 	/*
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index d1e10546eb8..fe649081fbd 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -378,13 +378,13 @@ static void vlan_sync_address(struct net_device *dev,
 	 * the new address */
 	if (compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
 	    !compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
-		dev_unicast_delete(dev, vlandev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(dev, vlandev->dev_addr);
 
 	/* vlan address was equal to the old address and is different from
 	 * the new address */
 	if (!compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
 	    compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
-		dev_unicast_add(dev, vlandev->dev_addr, ETH_ALEN);
+		dev_unicast_add(dev, vlandev->dev_addr);
 
 	memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
 }
@@ -758,7 +758,7 @@ static void __exit vlan_cleanup_module(void)
 		BUG_ON(!hlist_empty(&vlan_group_hash[i]));
 
 	unregister_pernet_gen_device(vlan_net_id, &vlan_net_ops);
-	synchronize_net();
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 
 	vlan_gvrp_uninit();
 }
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index c67fe6f7565..7f7de1a04de 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -114,9 +114,9 @@ int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
 EXPORT_SYMBOL(vlan_gro_receive);
 
 int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
-		   unsigned int vlan_tci, struct napi_gro_fraginfo *info)
+		   unsigned int vlan_tci)
 {
-	struct sk_buff *skb = napi_fraginfo_skb(napi, info);
+	struct sk_buff *skb = napi_frags_skb(napi);
 
 	if (!skb)
 		return NET_RX_DROP;
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b4b9068e55a..96bad8f233e 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -290,7 +290,7 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
 
 static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
 
 	/* Handle non-VLAN frames if they are sent to us, for example by DHCP.
@@ -309,7 +309,7 @@ static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
 		skb = __vlan_put_tag(skb, vlan_tci);
 		if (!skb) {
-			stats->tx_dropped++;
+			txq->tx_dropped++;
 			return NETDEV_TX_OK;
 		}
 
@@ -317,8 +317,8 @@ static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			vlan_dev_info(dev)->cnt_inc_headroom_on_tx++;
 	}
 
-	stats->tx_packets++;
-	stats->tx_bytes += skb->len;
+	txq->tx_packets++;
+	txq->tx_bytes += skb->len;
 
 	skb->dev = vlan_dev_info(dev)->real_dev;
 	dev_queue_xmit(skb);
@@ -328,15 +328,15 @@ static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 static int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
 					    struct net_device *dev)
 {
-	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	u16 vlan_tci;
 
 	vlan_tci = vlan_dev_info(dev)->vlan_id;
 	vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
 	skb = __vlan_hwaccel_put_tag(skb, vlan_tci);
 
-	stats->tx_packets++;
-	stats->tx_bytes += skb->len;
+	txq->tx_packets++;
+	txq->tx_bytes += skb->len;
 
 	skb->dev = vlan_dev_info(dev)->real_dev;
 	dev_queue_xmit(skb);
@@ -441,7 +441,7 @@ static int vlan_dev_open(struct net_device *dev)
 		return -ENETDOWN;
 
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr)) {
-		err = dev_unicast_add(real_dev, dev->dev_addr, ETH_ALEN);
+		err = dev_unicast_add(real_dev, dev->dev_addr);
 		if (err < 0)
 			goto out;
 	}
@@ -470,7 +470,7 @@ clear_allmulti:
 		dev_set_allmulti(real_dev, -1);
 del_unicast:
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
-		dev_unicast_delete(real_dev, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(real_dev, dev->dev_addr);
 out:
 	netif_carrier_off(dev);
 	return err;
@@ -492,7 +492,7 @@ static int vlan_dev_stop(struct net_device *dev)
 		dev_set_promiscuity(real_dev, -1);
 
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
-		dev_unicast_delete(real_dev, dev->dev_addr, dev->addr_len);
+		dev_unicast_delete(real_dev, dev->dev_addr);
 
 	netif_carrier_off(dev);
 	return 0;
@@ -511,13 +511,13 @@ static int vlan_dev_set_mac_address(struct net_device *dev, void *p)
 		goto out;
 
 	if (compare_ether_addr(addr->sa_data, real_dev->dev_addr)) {
-		err = dev_unicast_add(real_dev, addr->sa_data, ETH_ALEN);
+		err = dev_unicast_add(real_dev, addr->sa_data);
 		if (err < 0)
 			return err;
 	}
 
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
-		dev_unicast_delete(real_dev, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(real_dev, dev->dev_addr);
 
 out:
 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
@@ -644,7 +644,6 @@ static int vlan_dev_init(struct net_device *dev)
 		dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
 		dev->netdev_ops         = &vlan_netdev_ops;
 	}
-	netdev_resync_ops(dev);
 
 	if (is_vlan_dev(real_dev))
 		subclass = 1;
@@ -671,13 +670,7 @@ static int vlan_ethtool_get_settings(struct net_device *dev,
 				     struct ethtool_cmd *cmd)
 {
 	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
-	struct net_device *real_dev = vlan->real_dev;
-
-	if (!real_dev->ethtool_ops ||
-	    !real_dev->ethtool_ops->get_settings)
-		return -EOPNOTSUPP;
-
-	return real_dev->ethtool_ops->get_settings(real_dev, cmd);
+	return dev_ethtool_get_settings(vlan->real_dev, cmd);
 }
 
 static void vlan_ethtool_get_drvinfo(struct net_device *dev,
@@ -691,24 +684,13 @@ static void vlan_ethtool_get_drvinfo(struct net_device *dev,
 static u32 vlan_ethtool_get_rx_csum(struct net_device *dev)
 {
 	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
-	struct net_device *real_dev = vlan->real_dev;
-
-	if (real_dev->ethtool_ops == NULL ||
-	    real_dev->ethtool_ops->get_rx_csum == NULL)
-		return 0;
-	return real_dev->ethtool_ops->get_rx_csum(real_dev);
+	return dev_ethtool_get_rx_csum(vlan->real_dev);
 }
 
 static u32 vlan_ethtool_get_flags(struct net_device *dev)
 {
 	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
-	struct net_device *real_dev = vlan->real_dev;
-
-	if (!(real_dev->features & NETIF_F_HW_VLAN_RX) ||
-	    real_dev->ethtool_ops == NULL ||
-	    real_dev->ethtool_ops->get_flags == NULL)
-		return 0;
-	return real_dev->ethtool_ops->get_flags(real_dev);
+	return dev_ethtool_get_flags(vlan->real_dev);
 }
 
 static const struct ethtool_ops vlan_ethtool_ops = {
@@ -756,6 +738,7 @@ void vlan_setup(struct net_device *dev)
 	ether_setup(dev);
 
 	dev->priv_flags		|= IFF_802_1Q_VLAN;
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 	dev->tx_queue_len	= 0;
 
 	dev->netdev_ops		= &vlan_netdev_ops;
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 3628e0a81b4..b55a091a33d 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -279,13 +279,14 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset)
 {
 	struct net_device *vlandev = (struct net_device *) seq->private;
 	const struct vlan_dev_info *dev_info = vlan_dev_info(vlandev);
-	struct net_device_stats *stats = &vlandev->stats;
+	const struct net_device_stats *stats;
 	static const char fmt[] = "%30s %12lu\n";
 	int i;
 
 	if (!is_vlan_dev(vlandev))
 		return 0;
 
+	stats = dev_get_stats(vlandev);
 	seq_printf(seq,
 		   "%s  VID: %d	 REORDER_HDR: %i  dev->priv_flags: %hx\n",
 		   vlandev->name, dev_info->vlan_id,
diff --git a/net/Kconfig b/net/Kconfig
index c19f549c8e7..7051b971067 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -179,6 +179,7 @@ source "net/lapb/Kconfig"
 source "net/econet/Kconfig"
 source "net/wanrouter/Kconfig"
 source "net/phonet/Kconfig"
+source "net/ieee802154/Kconfig"
 source "net/sched/Kconfig"
 source "net/dcb/Kconfig"
 
diff --git a/net/Makefile b/net/Makefile
index 9e00a55a901..ba324aefda7 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_NET_9P)		+= 9p/
 ifneq ($(CONFIG_DCB),)
 obj-y				+= dcb/
 endif
+obj-y				+= ieee802154/
 
 ifeq ($(CONFIG_NET),y)
 obj-$(CONFIG_SYSCTL)		+= sysctl_net.o
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index d6a9243641a..b603cbacdc5 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -939,6 +939,7 @@ static unsigned long atalk_sum_skb(const struct sk_buff *skb, int offset,
 				   int len, unsigned long sum)
 {
 	int start = skb_headlen(skb);
+	struct sk_buff *frag_iter;
 	int i, copy;
 
 	/* checksum stuff in header space */
@@ -977,26 +978,22 @@ static unsigned long atalk_sum_skb(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-			WARN_ON(start > offset + len);
+		WARN_ON(start > offset + len);
 
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				sum = atalk_sum_skb(list, offset - start,
-						    copy, sum);
-				if ((len -= copy) == 0)
-					return sum;
-				offset += copy;
-			}
-			start = end;
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			sum = atalk_sum_skb(frag_iter, offset - start,
+					    copy, sum);
+			if ((len -= copy) == 0)
+				return sum;
+			offset += copy;
 		}
+		start = end;
 	}
 
 	BUG_ON(len > 0);
diff --git a/net/appletalk/dev.c b/net/appletalk/dev.c
index 72277d70c98..6c8016f6186 100644
--- a/net/appletalk/dev.c
+++ b/net/appletalk/dev.c
@@ -9,21 +9,10 @@
 #include <linux/if_arp.h>
 #include <linux/if_ltalk.h>
 
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-static int ltalk_change_mtu(struct net_device *dev, int mtu)
-{
-	return -EINVAL;
-}
-#endif
-
 static void ltalk_setup(struct net_device *dev)
 {
 	/* Fill in the fields of the device structure with localtalk-generic values. */
 
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->change_mtu		= ltalk_change_mtu;
-#endif
-
 	dev->type		= ARPHRD_LOCALTLK;
 	dev->hard_header_len 	= LTALK_HLEN;
 	dev->mtu		= LTALK_MTU;
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index 3100a8940af..2912665fc58 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -228,7 +228,7 @@ static int br2684_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct br2684_dev *brdev = BRPRIV(dev);
 	struct br2684_vcc *brvcc;
 
-	pr_debug("br2684_start_xmit, skb->dst=%p\n", skb->dst);
+	pr_debug("br2684_start_xmit, skb_dst(skb)=%p\n", skb_dst(skb));
 	read_lock(&devs_lock);
 	brvcc = pick_outgoing_vcc(skb, brdev);
 	if (brvcc == NULL) {
@@ -445,9 +445,10 @@ free_skb:
  */
 static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
 {
+	struct sk_buff_head queue;
 	int err;
 	struct br2684_vcc *brvcc;
-	struct sk_buff *skb;
+	struct sk_buff *skb, *tmp;
 	struct sk_buff_head *rq;
 	struct br2684_dev *brdev;
 	struct net_device *net_dev;
@@ -505,29 +506,20 @@ static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
 	barrier();
 	atmvcc->push = br2684_push;
 
+	__skb_queue_head_init(&queue);
 	rq = &sk_atm(atmvcc)->sk_receive_queue;
 
 	spin_lock_irqsave(&rq->lock, flags);
-	if (skb_queue_empty(rq)) {
-		skb = NULL;
-	} else {
-		/* NULL terminate the list.  */
-		rq->prev->next = NULL;
-		skb = rq->next;
-	}
-	rq->prev = rq->next = (struct sk_buff *)rq;
-	rq->qlen = 0;
+	skb_queue_splice_init(rq, &queue);
 	spin_unlock_irqrestore(&rq->lock, flags);
 
-	while (skb) {
-		struct sk_buff *next = skb->next;
+	skb_queue_walk_safe(&queue, skb, tmp) {
+		struct net_device *dev = skb->dev;
 
-		skb->next = skb->prev = NULL;
-		br2684_push(atmvcc, skb);
-		skb->dev->stats.rx_bytes -= skb->len;
-		skb->dev->stats.rx_packets--;
+		dev->stats.rx_bytes -= skb->len;
+		dev->stats.rx_packets--;
 
-		skb = next;
+		br2684_push(atmvcc, skb);
 	}
 	__module_get(THIS_MODULE);
 	return 0;
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 3dc0a3a42a5..e65a3b1477f 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -369,16 +369,16 @@ static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 
 	pr_debug("clip_start_xmit (skb %p)\n", skb);
-	if (!skb->dst) {
-		printk(KERN_ERR "clip_start_xmit: skb->dst == NULL\n");
+	if (!skb_dst(skb)) {
+		printk(KERN_ERR "clip_start_xmit: skb_dst(skb) == NULL\n");
 		dev_kfree_skb(skb);
 		dev->stats.tx_dropped++;
 		return 0;
 	}
-	if (!skb->dst->neighbour) {
+	if (!skb_dst(skb)->neighbour) {
 #if 0
-		skb->dst->neighbour = clip_find_neighbour(skb->dst, 1);
-		if (!skb->dst->neighbour) {
+		skb_dst(skb)->neighbour = clip_find_neighbour(skb_dst(skb), 1);
+		if (!skb_dst(skb)->neighbour) {
 			dev_kfree_skb(skb);	/* lost that one */
 			dev->stats.tx_dropped++;
 			return 0;
@@ -389,7 +389,7 @@ static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev->stats.tx_dropped++;
 		return 0;
 	}
-	entry = NEIGH2ENTRY(skb->dst->neighbour);
+	entry = NEIGH2ENTRY(skb_dst(skb)->neighbour);
 	if (!entry->vccs) {
 		if (time_after(jiffies, entry->expires)) {
 			/* should be resolved */
@@ -406,7 +406,7 @@ static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 	pr_debug("neigh %p, vccs %p\n", entry, entry->vccs);
 	ATM_SKB(skb)->vcc = vcc = entry->vccs->vcc;
-	pr_debug("using neighbour %p, vcc %p\n", skb->dst->neighbour, vcc);
+	pr_debug("using neighbour %p, vcc %p\n", skb_dst(skb)->neighbour, vcc);
 	if (entry->vccs->encap) {
 		void *here;
 
@@ -445,9 +445,9 @@ static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 static int clip_mkip(struct atm_vcc *vcc, int timeout)
 {
+	struct sk_buff_head *rq, queue;
 	struct clip_vcc *clip_vcc;
-	struct sk_buff *skb;
-	struct sk_buff_head *rq;
+	struct sk_buff *skb, *tmp;
 	unsigned long flags;
 
 	if (!vcc->push)
@@ -469,39 +469,28 @@ static int clip_mkip(struct atm_vcc *vcc, int timeout)
 	vcc->push = clip_push;
 	vcc->pop = clip_pop;
 
+	__skb_queue_head_init(&queue);
 	rq = &sk_atm(vcc)->sk_receive_queue;
 
 	spin_lock_irqsave(&rq->lock, flags);
-	if (skb_queue_empty(rq)) {
-		skb = NULL;
-	} else {
-		/* NULL terminate the list.  */
-		rq->prev->next = NULL;
-		skb = rq->next;
-	}
-	rq->prev = rq->next = (struct sk_buff *)rq;
-	rq->qlen = 0;
+	skb_queue_splice_init(rq, &queue);
 	spin_unlock_irqrestore(&rq->lock, flags);
 
 	/* re-process everything received between connection setup and MKIP */
-	while (skb) {
-		struct sk_buff *next = skb->next;
-
-		skb->next = skb->prev = NULL;
+	skb_queue_walk_safe(&queue, skb, tmp) {
 		if (!clip_devs) {
 			atm_return(vcc, skb->truesize);
 			kfree_skb(skb);
 		} else {
+			struct net_device *dev = skb->dev;
 			unsigned int len = skb->len;
 
 			skb_get(skb);
 			clip_push(vcc, skb);
-			skb->dev->stats.rx_packets--;
-			skb->dev->stats.rx_bytes -= len;
+			dev->stats.rx_packets--;
+			dev->stats.rx_bytes -= len;
 			kfree_skb(skb);
 		}
-
-		skb = next;
 	}
 	return 0;
 }
@@ -568,6 +557,7 @@ static void clip_setup(struct net_device *dev)
 	/* without any more elaborate queuing. 100 is a reasonable */
 	/* compromise between decent burst-tolerance and protection */
 	/* against memory hogs. */
+	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
 }
 
 static int clip_create(int number)
diff --git a/net/atm/lec.c b/net/atm/lec.c
index 199b6bb79f4..ff2e594dca9 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -34,7 +34,6 @@
 
 /* Proxy LEC knows about bridging */
 #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-#include <linux/if_bridge.h>
 #include "../bridge/br_private.h"
 
 static unsigned char bridge_ula_lec[] = { 0x01, 0x80, 0xc2, 0x00, 0x00 };
@@ -271,7 +270,8 @@ static int lec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk("%s:No lecd attached\n", dev->name);
 		dev->stats.tx_errors++;
 		netif_stop_queue(dev);
-		return -EUNATCH;
+		kfree_skb(skb);
+		return NETDEV_TX_OK;
 	}
 
 	pr_debug("skbuff head:%lx data:%lx tail:%lx end:%lx\n",
@@ -518,18 +518,14 @@ static int lec_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 	case l_should_bridge:
 #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
 		{
-			struct net_bridge_fdb_entry *f;
-
 			pr_debug("%s: bridge zeppelin asks about %pM\n",
 				 dev->name, mesg->content.proxy.mac_addr);
 
-			if (br_fdb_get_hook == NULL || dev->br_port == NULL)
+			if (br_fdb_test_addr_hook == NULL)
 				break;
 
-			f = br_fdb_get_hook(dev->br_port->br,
-					    mesg->content.proxy.mac_addr);
-			if (f != NULL && f->dst->dev != dev
-			    && f->dst->state == BR_STATE_FORWARDING) {
+			if (br_fdb_test_addr_hook(dev,
+					mesg->content.proxy.mac_addr)) {
 				/* hit from bridge table, send LE_ARP_RESPONSE */
 				struct sk_buff *skb2;
 				struct sock *sk;
@@ -540,10 +536,8 @@ static int lec_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 				skb2 =
 				    alloc_skb(sizeof(struct atmlec_msg),
 					      GFP_ATOMIC);
-				if (skb2 == NULL) {
-					br_fdb_put_hook(f);
+				if (skb2 == NULL)
 					break;
-				}
 				skb2->len = sizeof(struct atmlec_msg);
 				skb_copy_to_linear_data(skb2, mesg,
 							sizeof(*mesg));
@@ -552,8 +546,6 @@ static int lec_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 				skb_queue_tail(&sk->sk_receive_queue, skb2);
 				sk->sk_data_ready(sk, skb2->len);
 			}
-			if (f != NULL)
-				br_fdb_put_hook(f);
 		}
 #endif /* defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE) */
 		break;
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index 7725da95a76..59fdb1d2e8e 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -3,8 +3,9 @@
 #
 
 menuconfig BT
-	depends on NET && !S390
 	tristate "Bluetooth subsystem support"
+	depends on NET && !S390
+	depends on RFKILL || !RFKILL
 	help
 	  Bluetooth is low-cost, low-power, short-range wireless technology.
 	  It was designed as a replacement for cables and other short-range
diff --git a/net/bluetooth/cmtp/capi.c b/net/bluetooth/cmtp/capi.c
index 78958c0f9a4..97f8d68d574 100644
--- a/net/bluetooth/cmtp/capi.c
+++ b/net/bluetooth/cmtp/capi.c
@@ -382,7 +382,7 @@ static void cmtp_reset_ctr(struct capi_ctr *ctrl)
 
 	BT_DBG("ctrl %p", ctrl);
 
-	capi_ctr_reseted(ctrl);
+	capi_ctr_down(ctrl);
 
 	atomic_inc(&session->terminate);
 	cmtp_schedule(session);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index cd061510b6b..406ad07cdea 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -39,6 +39,7 @@
 #include <linux/skbuff.h>
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
+#include <linux/rfkill.h>
 #include <net/sock.h>
 
 #include <asm/system.h>
@@ -476,6 +477,11 @@ int hci_dev_open(__u16 dev)
 
 	hci_req_lock(hdev);
 
+	if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) {
+		ret = -ERFKILL;
+		goto done;
+	}
+
 	if (test_bit(HCI_UP, &hdev->flags)) {
 		ret = -EALREADY;
 		goto done;
@@ -813,6 +819,24 @@ int hci_get_dev_info(void __user *arg)
 
 /* ---- Interface to HCI drivers ---- */
 
+static int hci_rfkill_set_block(void *data, bool blocked)
+{
+	struct hci_dev *hdev = data;
+
+	BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked);
+
+	if (!blocked)
+		return 0;
+
+	hci_dev_do_close(hdev);
+
+	return 0;
+}
+
+static const struct rfkill_ops hci_rfkill_ops = {
+	.set_block = hci_rfkill_set_block,
+};
+
 /* Alloc HCI device */
 struct hci_dev *hci_alloc_dev(void)
 {
@@ -844,7 +868,8 @@ int hci_register_dev(struct hci_dev *hdev)
 	struct list_head *head = &hci_dev_list, *p;
 	int i, id = 0;
 
-	BT_DBG("%p name %s type %d owner %p", hdev, hdev->name, hdev->type, hdev->owner);
+	BT_DBG("%p name %s type %d owner %p", hdev, hdev->name,
+						hdev->type, hdev->owner);
 
 	if (!hdev->open || !hdev->close || !hdev->destruct)
 		return -EINVAL;
@@ -900,6 +925,15 @@ int hci_register_dev(struct hci_dev *hdev)
 
 	hci_register_sysfs(hdev);
 
+	hdev->rfkill = rfkill_alloc(hdev->name, &hdev->dev,
+				RFKILL_TYPE_BLUETOOTH, &hci_rfkill_ops, hdev);
+	if (hdev->rfkill) {
+		if (rfkill_register(hdev->rfkill) < 0) {
+			rfkill_destroy(hdev->rfkill);
+			hdev->rfkill = NULL;
+		}
+	}
+
 	hci_notify(hdev, HCI_DEV_REG);
 
 	return id;
@@ -924,6 +958,11 @@ int hci_unregister_dev(struct hci_dev *hdev)
 
 	hci_notify(hdev, HCI_DEV_UNREG);
 
+	if (hdev->rfkill) {
+		rfkill_unregister(hdev->rfkill);
+		rfkill_destroy(hdev->rfkill);
+	}
+
 	hci_unregister_sysfs(hdev);
 
 	__hci_dev_put(hdev);
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index ca4d3b40d5c..bd0a4c1bced 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -40,10 +40,10 @@
 #include <linux/skbuff.h>
 #include <linux/list.h>
 #include <linux/device.h>
+#include <linux/uaccess.h>
 #include <net/sock.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -52,7 +52,7 @@
 
 #define VERSION "2.13"
 
-static u32 l2cap_feat_mask = 0x0080;
+static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
 static u8 l2cap_fixed_chan[8] = { 0x02, };
 
 static const struct proto_ops l2cap_sock_ops;
@@ -134,7 +134,8 @@ static inline struct sock *l2cap_get_chan_by_scid(struct l2cap_chan_list *l, u16
 	struct sock *s;
 	read_lock(&l->lock);
 	s = __l2cap_get_chan_by_scid(l, cid);
-	if (s) bh_lock_sock(s);
+	if (s)
+		bh_lock_sock(s);
 	read_unlock(&l->lock);
 	return s;
 }
@@ -154,17 +155,18 @@ static inline struct sock *l2cap_get_chan_by_ident(struct l2cap_chan_list *l, u8
 	struct sock *s;
 	read_lock(&l->lock);
 	s = __l2cap_get_chan_by_ident(l, ident);
-	if (s) bh_lock_sock(s);
+	if (s)
+		bh_lock_sock(s);
 	read_unlock(&l->lock);
 	return s;
 }
 
 static u16 l2cap_alloc_cid(struct l2cap_chan_list *l)
 {
-	u16 cid = 0x0040;
+	u16 cid = L2CAP_CID_DYN_START;
 
-	for (; cid < 0xffff; cid++) {
-		if(!__l2cap_get_chan_by_scid(l, cid))
+	for (; cid < L2CAP_CID_DYN_END; cid++) {
+		if (!__l2cap_get_chan_by_scid(l, cid))
 			return cid;
 	}
 
@@ -204,7 +206,8 @@ static void __l2cap_chan_add(struct l2cap_conn *conn, struct sock *sk, struct so
 {
 	struct l2cap_chan_list *l = &conn->chan_list;
 
-	BT_DBG("conn %p, psm 0x%2.2x, dcid 0x%4.4x", conn, l2cap_pi(sk)->psm, l2cap_pi(sk)->dcid);
+	BT_DBG("conn %p, psm 0x%2.2x, dcid 0x%4.4x", conn,
+			l2cap_pi(sk)->psm, l2cap_pi(sk)->dcid);
 
 	conn->disc_reason = 0x13;
 
@@ -215,13 +218,13 @@ static void __l2cap_chan_add(struct l2cap_conn *conn, struct sock *sk, struct so
 		l2cap_pi(sk)->scid = l2cap_alloc_cid(l);
 	} else if (sk->sk_type == SOCK_DGRAM) {
 		/* Connectionless socket */
-		l2cap_pi(sk)->scid = 0x0002;
-		l2cap_pi(sk)->dcid = 0x0002;
+		l2cap_pi(sk)->scid = L2CAP_CID_CONN_LESS;
+		l2cap_pi(sk)->dcid = L2CAP_CID_CONN_LESS;
 		l2cap_pi(sk)->omtu = L2CAP_DEFAULT_MTU;
 	} else {
 		/* Raw socket can send/recv signalling messages only */
-		l2cap_pi(sk)->scid = 0x0001;
-		l2cap_pi(sk)->dcid = 0x0001;
+		l2cap_pi(sk)->scid = L2CAP_CID_SIGNALING;
+		l2cap_pi(sk)->dcid = L2CAP_CID_SIGNALING;
 		l2cap_pi(sk)->omtu = L2CAP_DEFAULT_MTU;
 	}
 
@@ -272,7 +275,7 @@ static inline int l2cap_check_security(struct sock *sk)
 		if (l2cap_pi(sk)->sec_level == BT_SECURITY_HIGH)
 			auth_type = HCI_AT_NO_BONDING_MITM;
 		else
-                        auth_type = HCI_AT_NO_BONDING;
+			auth_type = HCI_AT_NO_BONDING;
 
 		if (l2cap_pi(sk)->sec_level == BT_SECURITY_LOW)
 			l2cap_pi(sk)->sec_level = BT_SECURITY_SDP;
@@ -588,7 +591,8 @@ static inline struct sock *l2cap_get_sock_by_psm(int state, __le16 psm, bdaddr_t
 	struct sock *s;
 	read_lock(&l2cap_sk_list.lock);
 	s = __l2cap_get_sock_by_psm(state, psm, src);
-	if (s) bh_lock_sock(s);
+	if (s)
+		bh_lock_sock(s);
 	read_unlock(&l2cap_sk_list.lock);
 	return s;
 }
@@ -808,7 +812,7 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
 		goto done;
 	}
 
-	if (la.l2_psm && btohs(la.l2_psm) < 0x1001 &&
+	if (la.l2_psm && __le16_to_cpu(la.l2_psm) < 0x1001 &&
 				!capable(CAP_NET_BIND_SERVICE)) {
 		err = -EACCES;
 		goto done;
@@ -825,7 +829,8 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
 		l2cap_pi(sk)->sport = la.l2_psm;
 		sk->sk_state = BT_BOUND;
 
-		if (btohs(la.l2_psm) == 0x0001 || btohs(la.l2_psm) == 0x0003)
+		if (__le16_to_cpu(la.l2_psm) == 0x0001 ||
+					__le16_to_cpu(la.l2_psm) == 0x0003)
 			l2cap_pi(sk)->sec_level = BT_SECURITY_SDP;
 	}
 
@@ -844,12 +849,13 @@ static int l2cap_do_connect(struct sock *sk)
 	struct hci_conn *hcon;
 	struct hci_dev *hdev;
 	__u8 auth_type;
-	int err = 0;
+	int err;
 
 	BT_DBG("%s -> %s psm 0x%2.2x", batostr(src), batostr(dst),
 							l2cap_pi(sk)->psm);
 
-	if (!(hdev = hci_get_route(dst, src)))
+	hdev = hci_get_route(dst, src);
+	if (!hdev)
 		return -EHOSTUNREACH;
 
 	hci_dev_lock_bh(hdev);
@@ -950,7 +956,7 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, int al
 		goto done;
 	}
 
-	switch(sk->sk_state) {
+	switch (sk->sk_state) {
 	case BT_CONNECT:
 	case BT_CONNECT2:
 	case BT_CONFIG:
@@ -975,7 +981,8 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, int al
 	bacpy(&bt_sk(sk)->dst, &la.l2_bdaddr);
 	l2cap_pi(sk)->psm = la.l2_psm;
 
-	if ((err = l2cap_do_connect(sk)))
+	err = l2cap_do_connect(sk);
+	if (err)
 		goto done;
 
 wait:
@@ -1009,9 +1016,9 @@ static int l2cap_sock_listen(struct socket *sock, int backlog)
 		write_lock_bh(&l2cap_sk_list.lock);
 
 		for (psm = 0x1001; psm < 0x1100; psm += 2)
-			if (!__l2cap_get_sock_by_addr(htobs(psm), src)) {
-				l2cap_pi(sk)->psm   = htobs(psm);
-				l2cap_pi(sk)->sport = htobs(psm);
+			if (!__l2cap_get_sock_by_addr(cpu_to_le16(psm), src)) {
+				l2cap_pi(sk)->psm   = cpu_to_le16(psm);
+				l2cap_pi(sk)->sport = cpu_to_le16(psm);
 				err = 0;
 				break;
 			}
@@ -1100,11 +1107,11 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr, int *l
 	if (peer) {
 		la->l2_psm = l2cap_pi(sk)->psm;
 		bacpy(&la->l2_bdaddr, &bt_sk(sk)->dst);
-		la->l2_cid = htobs(l2cap_pi(sk)->dcid);
+		la->l2_cid = cpu_to_le16(l2cap_pi(sk)->dcid);
 	} else {
 		la->l2_psm = l2cap_pi(sk)->sport;
 		bacpy(&la->l2_bdaddr, &bt_sk(sk)->src);
-		la->l2_cid = htobs(l2cap_pi(sk)->scid);
+		la->l2_cid = cpu_to_le16(l2cap_pi(sk)->scid);
 	}
 
 	return 0;
@@ -1114,7 +1121,7 @@ static inline int l2cap_do_send(struct sock *sk, struct msghdr *msg, int len)
 {
 	struct l2cap_conn *conn = l2cap_pi(sk)->conn;
 	struct sk_buff *skb, **frag;
-	int err, hlen, count, sent=0;
+	int err, hlen, count, sent = 0;
 	struct l2cap_hdr *lh;
 
 	BT_DBG("sk %p len %d", sk, len);
@@ -1167,8 +1174,8 @@ static inline int l2cap_do_send(struct sock *sk, struct msghdr *msg, int len)
 
 		frag = &(*frag)->next;
 	}
-
-	if ((err = hci_send_acl(conn->hcon, skb, 0)) < 0)
+	err = hci_send_acl(conn->hcon, skb, 0);
+	if (err < 0)
 		goto fail;
 
 	return sent;
@@ -1556,7 +1563,7 @@ static void l2cap_raw_recv(struct l2cap_conn *conn, struct sk_buff *skb)
 {
 	struct l2cap_chan_list *l = &conn->chan_list;
 	struct sk_buff *nskb;
-	struct sock * sk;
+	struct sock *sk;
 
 	BT_DBG("conn %p", conn);
 
@@ -1568,8 +1575,8 @@ static void l2cap_raw_recv(struct l2cap_conn *conn, struct sk_buff *skb)
 		/* Don't send frame to the socket it came from */
 		if (skb->sk == sk)
 			continue;
-
-		if (!(nskb = skb_clone(skb, GFP_ATOMIC)))
+		nskb = skb_clone(skb, GFP_ATOMIC);
+		if (!nskb)
 			continue;
 
 		if (sock_queue_rcv_skb(sk, nskb))
@@ -1587,7 +1594,8 @@ static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn,
 	struct l2cap_hdr *lh;
 	int len, count;
 
-	BT_DBG("conn %p, code 0x%2.2x, ident 0x%2.2x, len %d", conn, code, ident, dlen);
+	BT_DBG("conn %p, code 0x%2.2x, ident 0x%2.2x, len %d",
+			conn, code, ident, dlen);
 
 	len = L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE + dlen;
 	count = min_t(unsigned int, conn->mtu, len);
@@ -1598,7 +1606,7 @@ static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn,
 
 	lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
 	lh->len = cpu_to_le16(L2CAP_CMD_HDR_SIZE + dlen);
-	lh->cid = cpu_to_le16(0x0001);
+	lh->cid = cpu_to_le16(L2CAP_CID_SIGNALING);
 
 	cmd = (struct l2cap_cmd_hdr *) skb_put(skb, L2CAP_CMD_HDR_SIZE);
 	cmd->code  = code;
@@ -1739,8 +1747,8 @@ static int l2cap_parse_conf_req(struct sock *sk, void *data)
 	while (len >= L2CAP_CONF_OPT_SIZE) {
 		len -= l2cap_get_conf_opt(&req, &type, &olen, &val);
 
-		hint  = type & 0x80;
-		type &= 0x7f;
+		hint  = type & L2CAP_CONF_HINT;
+		type &= L2CAP_CONF_MASK;
 
 		switch (type) {
 		case L2CAP_CONF_MTU:
@@ -1966,10 +1974,12 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd
 	BT_DBG("dcid 0x%4.4x scid 0x%4.4x result 0x%2.2x status 0x%2.2x", dcid, scid, result, status);
 
 	if (scid) {
-		if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, scid)))
+		sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
+		if (!sk)
 			return 0;
 	} else {
-		if (!(sk = l2cap_get_chan_by_ident(&conn->chan_list, cmd->ident)))
+		sk = l2cap_get_chan_by_ident(&conn->chan_list, cmd->ident);
+		if (!sk)
 			return 0;
 	}
 
@@ -2012,7 +2022,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 
 	BT_DBG("dcid 0x%4.4x flags 0x%2.2x", dcid, flags);
 
-	if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid)))
+	sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid);
+	if (!sk)
 		return -ENOENT;
 
 	if (sk->sk_state == BT_DISCONN)
@@ -2079,9 +2090,11 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 	flags  = __le16_to_cpu(rsp->flags);
 	result = __le16_to_cpu(rsp->result);
 
-	BT_DBG("scid 0x%4.4x flags 0x%2.2x result 0x%2.2x", scid, flags, result);
+	BT_DBG("scid 0x%4.4x flags 0x%2.2x result 0x%2.2x",
+			scid, flags, result);
 
-	if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, scid)))
+	sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
+	if (!sk)
 		return 0;
 
 	switch (result) {
@@ -2142,7 +2155,8 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd
 
 	BT_DBG("scid 0x%4.4x dcid 0x%4.4x", scid, dcid);
 
-	if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid)))
+	sk = l2cap_get_chan_by_scid(&conn->chan_list, dcid);
+	if (!sk)
 		return 0;
 
 	rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
@@ -2169,7 +2183,8 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd
 
 	BT_DBG("dcid 0x%4.4x scid 0x%4.4x", dcid, scid);
 
-	if (!(sk = l2cap_get_chan_by_scid(&conn->chan_list, scid)))
+	sk = l2cap_get_chan_by_scid(&conn->chan_list, scid);
+	if (!sk)
 		return 0;
 
 	l2cap_chan_del(sk, 0);
@@ -2230,7 +2245,7 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn, struct l2cap_cm
 	if (type == L2CAP_IT_FEAT_MASK) {
 		conn->feat_mask = get_unaligned_le32(rsp->data);
 
-		if (conn->feat_mask & 0x0080) {
+		if (conn->feat_mask & L2CAP_FEAT_FIXED_CHAN) {
 			struct l2cap_info_req req;
 			req.type = cpu_to_le16(L2CAP_IT_FIXED_CHAN);
 
@@ -2403,7 +2418,8 @@ drop:
 	kfree_skb(skb);
 
 done:
-	if (sk) bh_unlock_sock(sk);
+	if (sk)
+		bh_unlock_sock(sk);
 	return 0;
 }
 
@@ -2420,11 +2436,11 @@ static void l2cap_recv_frame(struct l2cap_conn *conn, struct sk_buff *skb)
 	BT_DBG("len %d, cid 0x%4.4x", len, cid);
 
 	switch (cid) {
-	case 0x0001:
+	case L2CAP_CID_SIGNALING:
 		l2cap_sig_channel(conn, skb);
 		break;
 
-	case 0x0002:
+	case L2CAP_CID_CONN_LESS:
 		psm = get_unaligned((__le16 *) skb->data);
 		skb_pull(skb, 2);
 		l2cap_conless_channel(conn, psm, skb);
@@ -2650,7 +2666,8 @@ static int l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 fl
 		}
 
 		/* Allocate skb for the complete frame (with header) */
-		if (!(conn->rx_skb = bt_skb_alloc(len, GFP_ATOMIC)))
+		conn->rx_skb = bt_skb_alloc(len, GFP_ATOMIC);
+		if (!conn->rx_skb)
 			goto drop;
 
 		skb_copy_from_linear_data(skb, skb_put(conn->rx_skb, skb->len),
@@ -2704,13 +2721,13 @@ static ssize_t l2cap_sysfs_show(struct class *dev, char *buf)
 
 		str += sprintf(str, "%s %s %d %d 0x%4.4x 0x%4.4x %d %d %d\n",
 				batostr(&bt_sk(sk)->src), batostr(&bt_sk(sk)->dst),
-				sk->sk_state, btohs(pi->psm), pi->scid, pi->dcid,
-				pi->imtu, pi->omtu, pi->sec_level);
+				sk->sk_state, __le16_to_cpu(pi->psm), pi->scid,
+				pi->dcid, pi->imtu, pi->omtu, pi->sec_level);
 	}
 
 	read_unlock_bh(&l2cap_sk_list.lock);
 
-	return (str - buf);
+	return str - buf;
 }
 
 static CLASS_ATTR(l2cap, S_IRUGO, l2cap_sysfs_show, NULL);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 374536e050a..e50566ebf9f 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -679,7 +679,7 @@ static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst
 
 	bacpy(&addr.l2_bdaddr, dst);
 	addr.l2_family = AF_BLUETOOTH;
-	addr.l2_psm    = htobs(RFCOMM_PSM);
+	addr.l2_psm    = cpu_to_le16(RFCOMM_PSM);
 	addr.l2_cid    = 0;
 	*err = kernel_connect(sock, (struct sockaddr *) &addr, sizeof(addr), O_NONBLOCK);
 	if (*err == 0 || *err == -EINPROGRESS)
@@ -852,9 +852,9 @@ static int rfcomm_send_pn(struct rfcomm_session *s, int cr, struct rfcomm_dlc *d
 	}
 
 	if (cr && channel_mtu >= 0)
-		pn->mtu = htobs(channel_mtu);
+		pn->mtu = cpu_to_le16(channel_mtu);
 	else
-		pn->mtu = htobs(d->mtu);
+		pn->mtu = cpu_to_le16(d->mtu);
 
 	*ptr = __fcs(buf); ptr++;
 
@@ -1056,7 +1056,7 @@ static void rfcomm_make_uih(struct sk_buff *skb, u8 addr)
 
 	if (len > 127) {
 		hdr = (void *) skb_push(skb, 4);
-		put_unaligned(htobs(__len16(len)), (__le16 *) &hdr->len);
+		put_unaligned(cpu_to_le16(__len16(len)), (__le16 *) &hdr->len);
 	} else {
 		hdr = (void *) skb_push(skb, 3);
 		hdr->len = __len8(len);
@@ -1289,7 +1289,7 @@ static int rfcomm_apply_pn(struct rfcomm_dlc *d, int cr, struct rfcomm_pn *pn)
 
 	d->priority = pn->priority;
 
-	d->mtu = btohs(pn->mtu);
+	d->mtu = __le16_to_cpu(pn->mtu);
 
 	if (cr && d->mtu > s->mtu)
 		d->mtu = s->mtu;
@@ -1922,7 +1922,7 @@ static int rfcomm_add_listener(bdaddr_t *ba)
 	/* Bind socket */
 	bacpy(&addr.l2_bdaddr, ba);
 	addr.l2_family = AF_BLUETOOTH;
-	addr.l2_psm    = htobs(RFCOMM_PSM);
+	addr.l2_psm    = cpu_to_le16(RFCOMM_PSM);
 	addr.l2_cid    = 0;
 	err = kernel_bind(sock, (struct sockaddr *) &addr, sizeof(addr));
 	if (err < 0) {
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 4d2c1f1cb52..9aac5213105 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -65,8 +65,9 @@ static int __init br_init(void)
 	brioctl_set(br_ioctl_deviceless_stub);
 	br_handle_frame_hook = br_handle_frame;
 
-	br_fdb_get_hook = br_fdb_get;
-	br_fdb_put_hook = br_fdb_put;
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+	br_fdb_test_addr_hook = br_fdb_test_addr;
+#endif
 
 	return 0;
 err_out4:
@@ -95,8 +96,9 @@ static void __exit br_deinit(void)
 	synchronize_net();
 
 	br_netfilter_fini();
-	br_fdb_get_hook = NULL;
-	br_fdb_put_hook = NULL;
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+	br_fdb_test_addr_hook = NULL;
+#endif
 
 	br_handle_frame_hook = NULL;
 	br_fdb_fini();
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index a48f5efdb6b..57bf05c353b 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -71,10 +71,17 @@ static inline int br_mac_hash(const unsigned char *mac)
 	return jhash_1word(key, fdb_salt) & (BR_HASH_SIZE - 1);
 }
 
+static void fdb_rcu_free(struct rcu_head *head)
+{
+	struct net_bridge_fdb_entry *ent
+		= container_of(head, struct net_bridge_fdb_entry, rcu);
+	kmem_cache_free(br_fdb_cache, ent);
+}
+
 static inline void fdb_delete(struct net_bridge_fdb_entry *f)
 {
 	hlist_del_rcu(&f->hlist);
-	br_fdb_put(f);
+	call_rcu(&f->rcu, fdb_rcu_free);
 }
 
 void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr)
@@ -226,33 +233,26 @@ struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
 	return NULL;
 }
 
-/* Interface used by ATM hook that keeps a ref count */
-struct net_bridge_fdb_entry *br_fdb_get(struct net_bridge *br,
-					unsigned char *addr)
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+/* Interface used by ATM LANE hook to test
+ * if an addr is on some other bridge port */
+int br_fdb_test_addr(struct net_device *dev, unsigned char *addr)
 {
 	struct net_bridge_fdb_entry *fdb;
+	int ret;
+
+	if (!dev->br_port)
+		return 0;
 
 	rcu_read_lock();
-	fdb = __br_fdb_get(br, addr);
-	if (fdb && !atomic_inc_not_zero(&fdb->use_count))
-		fdb = NULL;
+	fdb = __br_fdb_get(dev->br_port->br, addr);
+	ret = fdb && fdb->dst->dev != dev &&
+		fdb->dst->state == BR_STATE_FORWARDING;
 	rcu_read_unlock();
-	return fdb;
-}
-
-static void fdb_rcu_free(struct rcu_head *head)
-{
-	struct net_bridge_fdb_entry *ent
-		= container_of(head, struct net_bridge_fdb_entry, rcu);
-	kmem_cache_free(br_fdb_cache, ent);
-}
 
-/* Set entry up for deletion with RCU  */
-void br_fdb_put(struct net_bridge_fdb_entry *ent)
-{
-	if (atomic_dec_and_test(&ent->use_count))
-		call_rcu(&ent->rcu, fdb_rcu_free);
+	return ret;
 }
+#endif /* CONFIG_ATM_LANE */
 
 /*
  * Fill buffer with forwarding table records in
@@ -326,7 +326,6 @@ static struct net_bridge_fdb_entry *fdb_create(struct hlist_head *head,
 	fdb = kmem_cache_alloc(br_fdb_cache, GFP_ATOMIC);
 	if (fdb) {
 		memcpy(fdb->addr.addr, addr, ETH_ALEN);
-		atomic_set(&fdb->use_count, 1);
 		hlist_add_head_rcu(&fdb->hlist, head);
 
 		fdb->dst = source;
@@ -398,7 +397,7 @@ void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
 		if (unlikely(fdb->is_local)) {
 			if (net_ratelimit())
 				printk(KERN_WARNING "%s: received packet with "
-				       " own address as source address\n",
+				       "own address as source address\n",
 				       source->dev->name);
 		} else {
 			/* fastpath: update of existing entry */
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index e4a418fcb35..d22f611e400 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -228,6 +228,7 @@ int nf_bridge_copy_header(struct sk_buff *skb)
 static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
 {
 	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
+	struct rtable *rt;
 
 	if (nf_bridge->mask & BRNF_PKT_TYPE) {
 		skb->pkt_type = PACKET_OTHERHOST;
@@ -235,12 +236,13 @@ static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
 	}
 	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
 
-	skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
-	if (!skb->rtable) {
+	rt = bridge_parent_rtable(nf_bridge->physindev);
+	if (!rt) {
 		kfree_skb(skb);
 		return 0;
 	}
-	dst_hold(&skb->rtable->u.dst);
+	dst_hold(&rt->u.dst);
+	skb_dst_set(skb, &rt->u.dst);
 
 	skb->dev = nf_bridge->physindev;
 	nf_bridge_push_encap_header(skb);
@@ -320,7 +322,7 @@ static int br_nf_pre_routing_finish_bridge(struct sk_buff *skb)
 
 	skb->dev = bridge_parent(skb->dev);
 	if (skb->dev) {
-		struct dst_entry *dst = skb->dst;
+		struct dst_entry *dst = skb_dst(skb);
 
 		nf_bridge_pull_encap_header(skb);
 
@@ -338,6 +340,7 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
 	struct net_device *dev = skb->dev;
 	struct iphdr *iph = ip_hdr(skb);
 	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
+	struct rtable *rt;
 	int err;
 
 	if (nf_bridge->mask & BRNF_PKT_TYPE) {
@@ -347,7 +350,6 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
 	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
 	if (dnat_took_place(skb)) {
 		if ((err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos, dev))) {
-			struct rtable *rt;
 			struct flowi fl = {
 				.nl_u = {
 					.ip4_u = {
@@ -373,7 +375,7 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
 				/* - Bridged-and-DNAT'ed traffic doesn't
 				 *   require ip_forwarding. */
 				if (((struct dst_entry *)rt)->dev == dev) {
-					skb->dst = (struct dst_entry *)rt;
+					skb_dst_set(skb, (struct dst_entry *)rt);
 					goto bridged_dnat;
 				}
 				/* we are sure that forwarding is disabled, so printing
@@ -387,7 +389,7 @@ free_skb:
 			kfree_skb(skb);
 			return 0;
 		} else {
-			if (skb->dst->dev == dev) {
+			if (skb_dst(skb)->dev == dev) {
 bridged_dnat:
 				/* Tell br_nf_local_out this is a
 				 * bridged frame */
@@ -404,12 +406,13 @@ bridged_dnat:
 			skb->pkt_type = PACKET_HOST;
 		}
 	} else {
-		skb->rtable = bridge_parent_rtable(nf_bridge->physindev);
-		if (!skb->rtable) {
+		rt = bridge_parent_rtable(nf_bridge->physindev);
+		if (!rt) {
 			kfree_skb(skb);
 			return 0;
 		}
-		dst_hold(&skb->rtable->u.dst);
+		dst_hold(&rt->u.dst);
+		skb_dst_set(skb, &rt->u.dst);
 	}
 
 	skb->dev = nf_bridge->physindev;
@@ -628,10 +631,10 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb,
 				   const struct net_device *out,
 				   int (*okfn)(struct sk_buff *))
 {
-	if (skb->rtable && skb->rtable == bridge_parent_rtable(in)) {
-		dst_release(&skb->rtable->u.dst);
-		skb->rtable = NULL;
-	}
+	struct rtable *rt = skb_rtable(skb);
+
+	if (rt && rt == bridge_parent_rtable(in))
+		skb_dst_drop(skb);
 
 	return NF_ACCEPT;
 }
@@ -846,7 +849,7 @@ static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff *skb,
 		return NF_ACCEPT;
 
 #ifdef CONFIG_NETFILTER_DEBUG
-	if (skb->dst == NULL) {
+	if (skb_dst(skb) == NULL) {
 		printk(KERN_INFO "br_netfilter post_routing: skb->dst == NULL\n");
 		goto print_error;
 	}
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index b6c3b71974d..d5b5537272b 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -51,7 +51,6 @@ struct net_bridge_fdb_entry
 	struct net_bridge_port		*dst;
 
 	struct rcu_head			rcu;
-	atomic_t			use_count;
 	unsigned long			ageing_timer;
 	mac_addr			addr;
 	unsigned char			is_local;
@@ -154,9 +153,7 @@ extern void br_fdb_delete_by_port(struct net_bridge *br,
 				  const struct net_bridge_port *p, int do_all);
 extern struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
 						 const unsigned char *addr);
-extern struct net_bridge_fdb_entry *br_fdb_get(struct net_bridge *br,
-					       unsigned char *addr);
-extern void br_fdb_put(struct net_bridge_fdb_entry *ent);
+extern int br_fdb_test_addr(struct net_device *dev, unsigned char *addr);
 extern int br_fdb_fillbuf(struct net_bridge *br, void *buf,
 			  unsigned long count, unsigned long off);
 extern int br_fdb_insert(struct net_bridge *br,
@@ -242,10 +239,9 @@ extern void br_stp_port_timer_init(struct net_bridge_port *p);
 extern unsigned long br_timer_value(const struct timer_list *timer);
 
 /* br.c */
-extern struct net_bridge_fdb_entry *(*br_fdb_get_hook)(struct net_bridge *br,
-						       unsigned char *addr);
-extern void (*br_fdb_put_hook)(struct net_bridge_fdb_entry *ent);
-
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+extern int (*br_fdb_test_addr_hook)(struct net_device *dev, unsigned char *addr);
+#endif
 
 /* br_netlink.c */
 extern int br_netlink_init(void);
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index 603d89248e7..ee4820aa184 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -172,7 +172,8 @@ static ssize_t store_stp_state(struct device *d,
 	if (endp == buf)
 		return -EINVAL;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	br_stp_set_enabled(br, val);
 	rtnl_unlock();
 
diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c
index 02b2d50cce4..4a3cdf8f381 100644
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -189,7 +189,8 @@ static ssize_t brport_store(struct kobject * kobj,
 
 	val = simple_strtoul(buf, &endp, 0);
 	if (endp != buf) {
-		rtnl_lock();
+		if (!rtnl_trylock())
+			return restart_syscall();
 		if (p->dev && p->br && brport_attr->store) {
 			spin_lock_bh(&p->br->lock);
 			ret = brport_attr->store(p, val);
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 820252aee81..37928d5f284 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -142,6 +142,12 @@ static inline int ebt_basic_match(struct ebt_entry *e, struct ethhdr *h,
 	return 0;
 }
 
+static inline __pure
+struct ebt_entry *ebt_next_entry(const struct ebt_entry *entry)
+{
+	return (void *)entry + entry->next_offset;
+}
+
 /* Do some firewalling */
 unsigned int ebt_do_table (unsigned int hook, struct sk_buff *skb,
    const struct net_device *in, const struct net_device *out,
@@ -164,7 +170,7 @@ unsigned int ebt_do_table (unsigned int hook, struct sk_buff *skb,
 	mtpar.in      = tgpar.in  = in;
 	mtpar.out     = tgpar.out = out;
 	mtpar.hotdrop = &hotdrop;
-	tgpar.hooknum = hook;
+	mtpar.hooknum = tgpar.hooknum = hook;
 
 	read_lock_bh(&table->lock);
 	private = table->private;
@@ -249,8 +255,7 @@ letsreturn:
 		/* jump to a udc */
 		cs[sp].n = i + 1;
 		cs[sp].chaininfo = chaininfo;
-		cs[sp].e = (struct ebt_entry *)
-		   (((char *)point) + point->next_offset);
+		cs[sp].e = ebt_next_entry(point);
 		i = 0;
 		chaininfo = (struct ebt_entries *) (base + verdict);
 #ifdef CONFIG_NETFILTER_DEBUG
@@ -266,8 +271,7 @@ letsreturn:
 		sp++;
 		continue;
 letscontinue:
-		point = (struct ebt_entry *)
-		   (((char *)point) + point->next_offset);
+		point = ebt_next_entry(point);
 		i++;
 	}
 
@@ -787,7 +791,7 @@ static int check_chainloops(struct ebt_entries *chain, struct ebt_cl_stack *cl_s
 			/* this can't be 0, so the loop test is correct */
 			cl_s[i].cs.n = pos + 1;
 			pos = 0;
-			cl_s[i].cs.e = ((void *)e + e->next_offset);
+			cl_s[i].cs.e = ebt_next_entry(e);
 			e = (struct ebt_entry *)(hlp2->data);
 			nentries = hlp2->nentries;
 			cl_s[i].from = chain_nr;
@@ -797,7 +801,7 @@ static int check_chainloops(struct ebt_entries *chain, struct ebt_cl_stack *cl_s
 			continue;
 		}
 letscontinue:
-		e = (void *)e + e->next_offset;
+		e = ebt_next_entry(e);
 		pos++;
 	}
 	return 0;
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 10f0528c3bf..e733725b11d 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -903,6 +903,8 @@ static __exit void can_exit(void)
 	}
 	spin_unlock(&can_rcvlists_lock);
 
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
+
 	kmem_cache_destroy(rcv_cache);
 }
 
diff --git a/net/core/datagram.c b/net/core/datagram.c
index b01a76abe1d..58abee1f1df 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -260,7 +260,9 @@ int skb_kill_datagram(struct sock *sk, struct sk_buff *skb, unsigned int flags)
 		spin_unlock_bh(&sk->sk_receive_queue.lock);
 	}
 
-	skb_free_datagram(sk, skb);
+	kfree_skb(skb);
+	sk_mem_reclaim_partial(sk);
+
 	return err;
 }
 
@@ -280,6 +282,7 @@ int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 
 	/* Copy header. */
 	if (copy > 0) {
@@ -320,28 +323,24 @@ int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				if (skb_copy_datagram_iovec(list,
-							    offset - start,
-							    to, copy))
-					goto fault;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_copy_datagram_iovec(frag_iter,
+						    offset - start,
+						    to, copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
@@ -351,30 +350,124 @@ fault:
 }
 
 /**
+ *	skb_copy_datagram_const_iovec - Copy a datagram to an iovec.
+ *	@skb: buffer to copy
+ *	@offset: offset in the buffer to start copying from
+ *	@to: io vector to copy to
+ *	@to_offset: offset in the io vector to start copying to
+ *	@len: amount of data to copy from buffer to iovec
+ *
+ *	Returns 0 or -EFAULT.
+ *	Note: the iovec is not modified during the copy.
+ */
+int skb_copy_datagram_const_iovec(const struct sk_buff *skb, int offset,
+				  const struct iovec *to, int to_offset,
+				  int len)
+{
+	int start = skb_headlen(skb);
+	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
+
+	/* Copy header. */
+	if (copy > 0) {
+		if (copy > len)
+			copy = len;
+		if (memcpy_toiovecend(to, skb->data + offset, to_offset, copy))
+			goto fault;
+		if ((len -= copy) == 0)
+			return 0;
+		offset += copy;
+		to_offset += copy;
+	}
+
+	/* Copy paged appendix. Hmm... why does this look so complicated? */
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + skb_shinfo(skb)->frags[i].size;
+		if ((copy = end - offset) > 0) {
+			int err;
+			u8  *vaddr;
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			struct page *page = frag->page;
+
+			if (copy > len)
+				copy = len;
+			vaddr = kmap(page);
+			err = memcpy_toiovecend(to, vaddr + frag->page_offset +
+						offset - start, to_offset, copy);
+			kunmap(page);
+			if (err)
+				goto fault;
+			if (!(len -= copy))
+				return 0;
+			offset += copy;
+			to_offset += copy;
+		}
+		start = end;
+	}
+
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_copy_datagram_const_iovec(frag_iter,
+							  offset - start,
+							  to, to_offset,
+							  copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			to_offset += copy;
+		}
+		start = end;
+	}
+	if (!len)
+		return 0;
+
+fault:
+	return -EFAULT;
+}
+EXPORT_SYMBOL(skb_copy_datagram_const_iovec);
+
+/**
  *	skb_copy_datagram_from_iovec - Copy a datagram from an iovec.
  *	@skb: buffer to copy
  *	@offset: offset in the buffer to start copying to
  *	@from: io vector to copy to
+ *	@from_offset: offset in the io vector to start copying from
  *	@len: amount of data to copy to buffer from iovec
  *
  *	Returns 0 or -EFAULT.
- *	Note: the iovec is modified during the copy.
+ *	Note: the iovec is not modified during the copy.
  */
 int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
-				 struct iovec *from, int len)
+				 const struct iovec *from, int from_offset,
+				 int len)
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 
 	/* Copy header. */
 	if (copy > 0) {
 		if (copy > len)
 			copy = len;
-		if (memcpy_fromiovec(skb->data + offset, from, copy))
+		if (memcpy_fromiovecend(skb->data + offset, from, from_offset,
+					copy))
 			goto fault;
 		if ((len -= copy) == 0)
 			return 0;
 		offset += copy;
+		from_offset += copy;
 	}
 
 	/* Copy paged appendix. Hmm... why does this look so complicated? */
@@ -393,8 +486,9 @@ int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
 			if (copy > len)
 				copy = len;
 			vaddr = kmap(page);
-			err = memcpy_fromiovec(vaddr + frag->page_offset +
-					       offset - start, from, copy);
+			err = memcpy_fromiovecend(vaddr + frag->page_offset +
+						  offset - start,
+						  from, from_offset, copy);
 			kunmap(page);
 			if (err)
 				goto fault;
@@ -402,32 +496,32 @@ int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
 			if (!(len -= copy))
 				return 0;
 			offset += copy;
+			from_offset += copy;
 		}
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				if (skb_copy_datagram_from_iovec(list,
-								 offset - start,
-								 from, copy))
-					goto fault;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_copy_datagram_from_iovec(frag_iter,
+							 offset - start,
+							 from,
+							 from_offset,
+							 copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			from_offset += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
@@ -442,8 +536,9 @@ static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 				      __wsum *csump)
 {
 	int start = skb_headlen(skb);
-	int pos = 0;
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
+	int pos = 0;
 
 	/* Copy header. */
 	if (copy > 0) {
@@ -494,33 +589,29 @@ static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list=list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				__wsum csum2 = 0;
-				if (copy > len)
-					copy = len;
-				if (skb_copy_and_csum_datagram(list,
-							       offset - start,
-							       to, copy,
-							       &csum2))
-					goto fault;
-				*csump = csum_block_add(*csump, csum2, pos);
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-				to += copy;
-				pos += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			__wsum csum2 = 0;
+			if (copy > len)
+				copy = len;
+			if (skb_copy_and_csum_datagram(frag_iter,
+						       offset - start,
+						       to, copy,
+						       &csum2))
+				goto fault;
+			*csump = csum_block_add(*csump, csum2, pos);
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			to += copy;
+			pos += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
diff --git a/net/core/dev.c b/net/core/dev.c
index e2e9e4af3ac..576a61574a9 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -126,6 +126,7 @@
 #include <linux/in.h>
 #include <linux/jhash.h>
 #include <linux/random.h>
+#include <trace/events/napi.h>
 
 #include "net-sysfs.h"
 
@@ -268,7 +269,8 @@ static const unsigned short netdev_lock_type[] =
 	 ARPHRD_IRDA, ARPHRD_FCPP, ARPHRD_FCAL, ARPHRD_FCPL,
 	 ARPHRD_FCFABRIC, ARPHRD_IEEE802_TR, ARPHRD_IEEE80211,
 	 ARPHRD_IEEE80211_PRISM, ARPHRD_IEEE80211_RADIOTAP, ARPHRD_PHONET,
-	 ARPHRD_PHONET_PIPE, ARPHRD_VOID, ARPHRD_NONE};
+	 ARPHRD_PHONET_PIPE, ARPHRD_IEEE802154, ARPHRD_IEEE802154_PHY,
+	 ARPHRD_VOID, ARPHRD_NONE};
 
 static const char *netdev_lock_name[] =
 	{"_xmit_NETROM", "_xmit_ETHER", "_xmit_EETHER", "_xmit_AX25",
@@ -285,7 +287,8 @@ static const char *netdev_lock_name[] =
 	 "_xmit_IRDA", "_xmit_FCPP", "_xmit_FCAL", "_xmit_FCPL",
 	 "_xmit_FCFABRIC", "_xmit_IEEE802_TR", "_xmit_IEEE80211",
 	 "_xmit_IEEE80211_PRISM", "_xmit_IEEE80211_RADIOTAP", "_xmit_PHONET",
-	 "_xmit_PHONET_PIPE", "_xmit_VOID", "_xmit_NONE"};
+	 "_xmit_PHONET_PIPE", "_xmit_IEEE802154", "_xmit_IEEE802154_PHY",
+	 "_xmit_VOID", "_xmit_NONE"};
 
 static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE(netdev_lock_type)];
 static struct lock_class_key netdev_addr_lock_key[ARRAY_SIZE(netdev_lock_type)];
@@ -1047,7 +1050,7 @@ void dev_load(struct net *net, const char *name)
 int dev_open(struct net_device *dev)
 {
 	const struct net_device_ops *ops = dev->netdev_ops;
-	int ret = 0;
+	int ret;
 
 	ASSERT_RTNL();
 
@@ -1064,6 +1067,11 @@ int dev_open(struct net_device *dev)
 	if (!netif_device_present(dev))
 		return -ENODEV;
 
+	ret = call_netdevice_notifiers(NETDEV_PRE_UP, dev);
+	ret = notifier_to_errno(ret);
+	if (ret)
+		return ret;
+
 	/*
 	 *	Call device private open method
 	 */
@@ -1688,7 +1696,16 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
 				goto gso;
 		}
 
+		/*
+		 * If device doesnt need skb->dst, release it right now while
+		 * its hot in this cpu cache
+		 */
+		if (dev->priv_flags & IFF_XMIT_DST_RELEASE)
+			skb_dst_drop(skb);
+
 		rc = ops->ndo_start_xmit(skb, dev);
+		if (rc == 0)
+			txq_trans_update(txq);
 		/*
 		 * TODO: if skb_orphan() was called by
 		 * dev->hard_start_xmit() (for example, the unmodified
@@ -1718,6 +1735,7 @@ gso:
 			skb->next = nskb;
 			return rc;
 		}
+		txq_trans_update(txq);
 		if (unlikely(netif_tx_queue_stopped(txq) && skb->next))
 			return NETDEV_TX_BUSY;
 	} while (skb->next);
@@ -1735,8 +1753,12 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb)
 {
 	u32 hash;
 
-	if (skb_rx_queue_recorded(skb))
-		return skb_get_rx_queue(skb) % dev->real_num_tx_queues;
+	if (skb_rx_queue_recorded(skb)) {
+		hash = skb_get_rx_queue(skb);
+		while (unlikely (hash >= dev->real_num_tx_queues))
+			hash -= dev->real_num_tx_queues;
+		return hash;
+	}
 
 	if (skb->sk && skb->sk->sk_hash)
 		hash = skb->sk->sk_hash;
@@ -1800,7 +1822,7 @@ int dev_queue_xmit(struct sk_buff *skb)
 	if (netif_needs_gso(dev, skb))
 		goto gso;
 
-	if (skb_shinfo(skb)->frag_list &&
+	if (skb_has_frags(skb) &&
 	    !(dev->features & NETIF_F_FRAGLIST) &&
 	    __skb_linearize(skb))
 		goto out_kfree_skb;
@@ -2049,11 +2071,13 @@ static inline int deliver_skb(struct sk_buff *skb,
 }
 
 #if defined(CONFIG_BRIDGE) || defined (CONFIG_BRIDGE_MODULE)
-/* These hooks defined here for ATM */
-struct net_bridge;
-struct net_bridge_fdb_entry *(*br_fdb_get_hook)(struct net_bridge *br,
-						unsigned char *addr);
-void (*br_fdb_put_hook)(struct net_bridge_fdb_entry *ent) __read_mostly;
+
+#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
+/* This hook is defined here for ATM LANE */
+int (*br_fdb_test_addr_hook)(struct net_device *dev,
+			     unsigned char *addr) __read_mostly;
+EXPORT_SYMBOL(br_fdb_test_addr_hook);
+#endif
 
 /*
  * If bridge module is loaded call bridging hook.
@@ -2061,6 +2085,8 @@ void (*br_fdb_put_hook)(struct net_bridge_fdb_entry *ent) __read_mostly;
  */
 struct sk_buff *(*br_handle_frame_hook)(struct net_bridge_port *p,
 					struct sk_buff *skb) __read_mostly;
+EXPORT_SYMBOL(br_handle_frame_hook);
+
 static inline struct sk_buff *handle_bridge(struct sk_buff *skb,
 					    struct packet_type **pt_prev, int *ret,
 					    struct net_device *orig_dev)
@@ -2374,26 +2400,6 @@ void napi_gro_flush(struct napi_struct *napi)
 }
 EXPORT_SYMBOL(napi_gro_flush);
 
-void *skb_gro_header(struct sk_buff *skb, unsigned int hlen)
-{
-	unsigned int offset = skb_gro_offset(skb);
-
-	hlen += offset;
-	if (hlen <= skb_headlen(skb))
-		return skb->data + offset;
-
-	if (unlikely(!skb_shinfo(skb)->nr_frags ||
-		     skb_shinfo(skb)->frags[0].size <=
-		     hlen - skb_headlen(skb) ||
-		     PageHighMem(skb_shinfo(skb)->frags[0].page)))
-		return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL;
-
-	return page_address(skb_shinfo(skb)->frags[0].page) +
-	       skb_shinfo(skb)->frags[0].page_offset +
-	       offset - skb_headlen(skb);
-}
-EXPORT_SYMBOL(skb_gro_header);
-
 int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	struct sk_buff **pp = NULL;
@@ -2407,7 +2413,7 @@ int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 	if (!(skb->dev->features & NETIF_F_GRO))
 		goto normal;
 
-	if (skb_is_gso(skb) || skb_shinfo(skb)->frag_list)
+	if (skb_is_gso(skb) || skb_has_frags(skb))
 		goto normal;
 
 	rcu_read_lock();
@@ -2456,10 +2462,25 @@ int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 	ret = GRO_HELD;
 
 pull:
-	if (unlikely(!pskb_may_pull(skb, skb_gro_offset(skb)))) {
-		if (napi->gro_list == skb)
-			napi->gro_list = skb->next;
-		ret = GRO_DROP;
+	if (skb_headlen(skb) < skb_gro_offset(skb)) {
+		int grow = skb_gro_offset(skb) - skb_headlen(skb);
+
+		BUG_ON(skb->end - skb->tail < grow);
+
+		memcpy(skb_tail_pointer(skb), NAPI_GRO_CB(skb)->frag0, grow);
+
+		skb->tail += grow;
+		skb->data_len -= grow;
+
+		skb_shinfo(skb)->frags[0].page_offset += grow;
+		skb_shinfo(skb)->frags[0].size -= grow;
+
+		if (unlikely(!skb_shinfo(skb)->frags[0].size)) {
+			put_page(skb_shinfo(skb)->frags[0].page);
+			memmove(skb_shinfo(skb)->frags,
+				skb_shinfo(skb)->frags + 1,
+				--skb_shinfo(skb)->nr_frags);
+		}
 	}
 
 ok:
@@ -2509,6 +2530,22 @@ int napi_skb_finish(int ret, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(napi_skb_finish);
 
+void skb_gro_reset_offset(struct sk_buff *skb)
+{
+	NAPI_GRO_CB(skb)->data_offset = 0;
+	NAPI_GRO_CB(skb)->frag0 = NULL;
+	NAPI_GRO_CB(skb)->frag0_len = 0;
+
+	if (skb->mac_header == skb->tail &&
+	    !PageHighMem(skb_shinfo(skb)->frags[0].page)) {
+		NAPI_GRO_CB(skb)->frag0 =
+			page_address(skb_shinfo(skb)->frags[0].page) +
+			skb_shinfo(skb)->frags[0].page_offset;
+		NAPI_GRO_CB(skb)->frag0_len = skb_shinfo(skb)->frags[0].size;
+	}
+}
+EXPORT_SYMBOL(skb_gro_reset_offset);
+
 int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	skb_gro_reset_offset(skb);
@@ -2526,16 +2563,10 @@ void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(napi_reuse_skb);
 
-struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi,
-				  struct napi_gro_fraginfo *info)
+struct sk_buff *napi_get_frags(struct napi_struct *napi)
 {
 	struct net_device *dev = napi->dev;
 	struct sk_buff *skb = napi->skb;
-	struct ethhdr *eth;
-	skb_frag_t *frag;
-	int i;
-
-	napi->skb = NULL;
 
 	if (!skb) {
 		skb = netdev_alloc_skb(dev, GRO_MAX_HEAD + NET_IP_ALIGN);
@@ -2543,47 +2574,14 @@ struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi,
 			goto out;
 
 		skb_reserve(skb, NET_IP_ALIGN);
-	}
 
-	BUG_ON(info->nr_frags > MAX_SKB_FRAGS);
-	frag = info->frags;
-
-	for (i = 0; i < info->nr_frags; i++) {
-		skb_fill_page_desc(skb, i, frag->page, frag->page_offset,
-				   frag->size);
-		frag++;
-	}
-	skb_shinfo(skb)->nr_frags = info->nr_frags;
-
-	skb->data_len = info->len;
-	skb->len += info->len;
-	skb->truesize += info->len;
-
-	skb_reset_mac_header(skb);
-	skb_gro_reset_offset(skb);
-
-	eth = skb_gro_header(skb, sizeof(*eth));
-	if (!eth) {
-		napi_reuse_skb(napi, skb);
-		skb = NULL;
-		goto out;
+		napi->skb = skb;
 	}
 
-	skb_gro_pull(skb, sizeof(*eth));
-
-	/*
-	 * This works because the only protocols we care about don't require
-	 * special handling.  We'll fix it up properly at the end.
-	 */
-	skb->protocol = eth->h_proto;
-
-	skb->ip_summed = info->ip_summed;
-	skb->csum = info->csum;
-
 out:
 	return skb;
 }
-EXPORT_SYMBOL(napi_fraginfo_skb);
+EXPORT_SYMBOL(napi_get_frags);
 
 int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret)
 {
@@ -2613,9 +2611,46 @@ int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret)
 }
 EXPORT_SYMBOL(napi_frags_finish);
 
-int napi_gro_frags(struct napi_struct *napi, struct napi_gro_fraginfo *info)
+struct sk_buff *napi_frags_skb(struct napi_struct *napi)
 {
-	struct sk_buff *skb = napi_fraginfo_skb(napi, info);
+	struct sk_buff *skb = napi->skb;
+	struct ethhdr *eth;
+	unsigned int hlen;
+	unsigned int off;
+
+	napi->skb = NULL;
+
+	skb_reset_mac_header(skb);
+	skb_gro_reset_offset(skb);
+
+	off = skb_gro_offset(skb);
+	hlen = off + sizeof(*eth);
+	eth = skb_gro_header_fast(skb, off);
+	if (skb_gro_header_hard(skb, hlen)) {
+		eth = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!eth)) {
+			napi_reuse_skb(napi, skb);
+			skb = NULL;
+			goto out;
+		}
+	}
+
+	skb_gro_pull(skb, sizeof(*eth));
+
+	/*
+	 * This works because the only protocols we care about don't require
+	 * special handling.  We'll fix it up properly at the end.
+	 */
+	skb->protocol = eth->h_proto;
+
+out:
+	return skb;
+}
+EXPORT_SYMBOL(napi_frags_skb);
+
+int napi_gro_frags(struct napi_struct *napi)
+{
+	struct sk_buff *skb = napi_frags_skb(napi);
 
 	if (!skb)
 		return NET_RX_DROP;
@@ -2719,7 +2754,7 @@ void netif_napi_del(struct napi_struct *napi)
 	struct sk_buff *skb, *next;
 
 	list_del_init(&napi->dev_list);
-	kfree_skb(napi->skb);
+	napi_free_frags(napi);
 
 	for (skb = napi->gro_list; skb; skb = next) {
 		next = skb->next;
@@ -2773,8 +2808,10 @@ static void net_rx_action(struct softirq_action *h)
 		 * accidently calling ->poll() when NAPI is not scheduled.
 		 */
 		work = 0;
-		if (test_bit(NAPI_STATE_SCHED, &n->state))
+		if (test_bit(NAPI_STATE_SCHED, &n->state)) {
 			work = n->poll(n, weight);
+			trace_napi_poll(n);
+		}
 
 		WARN_ON_ONCE(work > weight);
 
@@ -3444,6 +3481,319 @@ void dev_set_rx_mode(struct net_device *dev)
 	netif_addr_unlock_bh(dev);
 }
 
+/* hw addresses list handling functions */
+
+static int __hw_addr_add(struct list_head *list, int *delta,
+			 unsigned char *addr, int addr_len,
+			 unsigned char addr_type)
+{
+	struct netdev_hw_addr *ha;
+	int alloc_size;
+
+	if (addr_len > MAX_ADDR_LEN)
+		return -EINVAL;
+
+	list_for_each_entry(ha, list, list) {
+		if (!memcmp(ha->addr, addr, addr_len) &&
+		    ha->type == addr_type) {
+			ha->refcount++;
+			return 0;
+		}
+	}
+
+
+	alloc_size = sizeof(*ha);
+	if (alloc_size < L1_CACHE_BYTES)
+		alloc_size = L1_CACHE_BYTES;
+	ha = kmalloc(alloc_size, GFP_ATOMIC);
+	if (!ha)
+		return -ENOMEM;
+	memcpy(ha->addr, addr, addr_len);
+	ha->type = addr_type;
+	ha->refcount = 1;
+	ha->synced = false;
+	list_add_tail_rcu(&ha->list, list);
+	if (delta)
+		(*delta)++;
+	return 0;
+}
+
+static void ha_rcu_free(struct rcu_head *head)
+{
+	struct netdev_hw_addr *ha;
+
+	ha = container_of(head, struct netdev_hw_addr, rcu_head);
+	kfree(ha);
+}
+
+static int __hw_addr_del(struct list_head *list, int *delta,
+			 unsigned char *addr, int addr_len,
+			 unsigned char addr_type)
+{
+	struct netdev_hw_addr *ha;
+
+	list_for_each_entry(ha, list, list) {
+		if (!memcmp(ha->addr, addr, addr_len) &&
+		    (ha->type == addr_type || !addr_type)) {
+			if (--ha->refcount)
+				return 0;
+			list_del_rcu(&ha->list);
+			call_rcu(&ha->rcu_head, ha_rcu_free);
+			if (delta)
+				(*delta)--;
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+static int __hw_addr_add_multiple(struct list_head *to_list, int *to_delta,
+				  struct list_head *from_list, int addr_len,
+				  unsigned char addr_type)
+{
+	int err;
+	struct netdev_hw_addr *ha, *ha2;
+	unsigned char type;
+
+	list_for_each_entry(ha, from_list, list) {
+		type = addr_type ? addr_type : ha->type;
+		err = __hw_addr_add(to_list, to_delta, ha->addr,
+				    addr_len, type);
+		if (err)
+			goto unroll;
+	}
+	return 0;
+
+unroll:
+	list_for_each_entry(ha2, from_list, list) {
+		if (ha2 == ha)
+			break;
+		type = addr_type ? addr_type : ha2->type;
+		__hw_addr_del(to_list, to_delta, ha2->addr,
+			      addr_len, type);
+	}
+	return err;
+}
+
+static void __hw_addr_del_multiple(struct list_head *to_list, int *to_delta,
+				   struct list_head *from_list, int addr_len,
+				   unsigned char addr_type)
+{
+	struct netdev_hw_addr *ha;
+	unsigned char type;
+
+	list_for_each_entry(ha, from_list, list) {
+		type = addr_type ? addr_type : ha->type;
+		__hw_addr_del(to_list, to_delta, ha->addr,
+			      addr_len, addr_type);
+	}
+}
+
+static int __hw_addr_sync(struct list_head *to_list, int *to_delta,
+			  struct list_head *from_list, int *from_delta,
+			  int addr_len)
+{
+	int err = 0;
+	struct netdev_hw_addr *ha, *tmp;
+
+	list_for_each_entry_safe(ha, tmp, from_list, list) {
+		if (!ha->synced) {
+			err = __hw_addr_add(to_list, to_delta, ha->addr,
+					    addr_len, ha->type);
+			if (err)
+				break;
+			ha->synced = true;
+			ha->refcount++;
+		} else if (ha->refcount == 1) {
+			__hw_addr_del(to_list, to_delta, ha->addr,
+				      addr_len, ha->type);
+			__hw_addr_del(from_list, from_delta, ha->addr,
+				      addr_len, ha->type);
+		}
+	}
+	return err;
+}
+
+static void __hw_addr_unsync(struct list_head *to_list, int *to_delta,
+			     struct list_head *from_list, int *from_delta,
+			     int addr_len)
+{
+	struct netdev_hw_addr *ha, *tmp;
+
+	list_for_each_entry_safe(ha, tmp, from_list, list) {
+		if (ha->synced) {
+			__hw_addr_del(to_list, to_delta, ha->addr,
+				      addr_len, ha->type);
+			ha->synced = false;
+			__hw_addr_del(from_list, from_delta, ha->addr,
+				      addr_len, ha->type);
+		}
+	}
+}
+
+
+static void __hw_addr_flush(struct list_head *list)
+{
+	struct netdev_hw_addr *ha, *tmp;
+
+	list_for_each_entry_safe(ha, tmp, list, list) {
+		list_del_rcu(&ha->list);
+		call_rcu(&ha->rcu_head, ha_rcu_free);
+	}
+}
+
+/* Device addresses handling functions */
+
+static void dev_addr_flush(struct net_device *dev)
+{
+	/* rtnl_mutex must be held here */
+
+	__hw_addr_flush(&dev->dev_addr_list);
+	dev->dev_addr = NULL;
+}
+
+static int dev_addr_init(struct net_device *dev)
+{
+	unsigned char addr[MAX_ADDR_LEN];
+	struct netdev_hw_addr *ha;
+	int err;
+
+	/* rtnl_mutex must be held here */
+
+	INIT_LIST_HEAD(&dev->dev_addr_list);
+	memset(addr, 0, sizeof(addr));
+	err = __hw_addr_add(&dev->dev_addr_list, NULL, addr, sizeof(addr),
+			    NETDEV_HW_ADDR_T_LAN);
+	if (!err) {
+		/*
+		 * Get the first (previously created) address from the list
+		 * and set dev_addr pointer to this location.
+		 */
+		ha = list_first_entry(&dev->dev_addr_list,
+				      struct netdev_hw_addr, list);
+		dev->dev_addr = ha->addr;
+	}
+	return err;
+}
+
+/**
+ *	dev_addr_add	- Add a device address
+ *	@dev: device
+ *	@addr: address to add
+ *	@addr_type: address type
+ *
+ *	Add a device address to the device or increase the reference count if
+ *	it already exists.
+ *
+ *	The caller must hold the rtnl_mutex.
+ */
+int dev_addr_add(struct net_device *dev, unsigned char *addr,
+		 unsigned char addr_type)
+{
+	int err;
+
+	ASSERT_RTNL();
+
+	err = __hw_addr_add(&dev->dev_addr_list, NULL, addr, dev->addr_len,
+			    addr_type);
+	if (!err)
+		call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+	return err;
+}
+EXPORT_SYMBOL(dev_addr_add);
+
+/**
+ *	dev_addr_del	- Release a device address.
+ *	@dev: device
+ *	@addr: address to delete
+ *	@addr_type: address type
+ *
+ *	Release reference to a device address and remove it from the device
+ *	if the reference count drops to zero.
+ *
+ *	The caller must hold the rtnl_mutex.
+ */
+int dev_addr_del(struct net_device *dev, unsigned char *addr,
+		 unsigned char addr_type)
+{
+	int err;
+	struct netdev_hw_addr *ha;
+
+	ASSERT_RTNL();
+
+	/*
+	 * We can not remove the first address from the list because
+	 * dev->dev_addr points to that.
+	 */
+	ha = list_first_entry(&dev->dev_addr_list, struct netdev_hw_addr, list);
+	if (ha->addr == dev->dev_addr && ha->refcount == 1)
+		return -ENOENT;
+
+	err = __hw_addr_del(&dev->dev_addr_list, NULL, addr, dev->addr_len,
+			    addr_type);
+	if (!err)
+		call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+	return err;
+}
+EXPORT_SYMBOL(dev_addr_del);
+
+/**
+ *	dev_addr_add_multiple	- Add device addresses from another device
+ *	@to_dev: device to which addresses will be added
+ *	@from_dev: device from which addresses will be added
+ *	@addr_type: address type - 0 means type will be used from from_dev
+ *
+ *	Add device addresses of the one device to another.
+ **
+ *	The caller must hold the rtnl_mutex.
+ */
+int dev_addr_add_multiple(struct net_device *to_dev,
+			  struct net_device *from_dev,
+			  unsigned char addr_type)
+{
+	int err;
+
+	ASSERT_RTNL();
+
+	if (from_dev->addr_len != to_dev->addr_len)
+		return -EINVAL;
+	err = __hw_addr_add_multiple(&to_dev->dev_addr_list, NULL,
+				     &from_dev->dev_addr_list,
+				     to_dev->addr_len, addr_type);
+	if (!err)
+		call_netdevice_notifiers(NETDEV_CHANGEADDR, to_dev);
+	return err;
+}
+EXPORT_SYMBOL(dev_addr_add_multiple);
+
+/**
+ *	dev_addr_del_multiple	- Delete device addresses by another device
+ *	@to_dev: device where the addresses will be deleted
+ *	@from_dev: device by which addresses the addresses will be deleted
+ *	@addr_type: address type - 0 means type will used from from_dev
+ *
+ *	Deletes addresses in to device by the list of addresses in from device.
+ *
+ *	The caller must hold the rtnl_mutex.
+ */
+int dev_addr_del_multiple(struct net_device *to_dev,
+			  struct net_device *from_dev,
+			  unsigned char addr_type)
+{
+	ASSERT_RTNL();
+
+	if (from_dev->addr_len != to_dev->addr_len)
+		return -EINVAL;
+	__hw_addr_del_multiple(&to_dev->dev_addr_list, NULL,
+			       &from_dev->dev_addr_list,
+			       to_dev->addr_len, addr_type);
+	call_netdevice_notifiers(NETDEV_CHANGEADDR, to_dev);
+	return 0;
+}
+EXPORT_SYMBOL(dev_addr_del_multiple);
+
+/* unicast and multicast addresses handling functions */
+
 int __dev_addr_delete(struct dev_addr_list **list, int *count,
 		      void *addr, int alen, int glbl)
 {
@@ -3506,24 +3856,22 @@ int __dev_addr_add(struct dev_addr_list **list, int *count,
  *	dev_unicast_delete	- Release secondary unicast address.
  *	@dev: device
  *	@addr: address to delete
- *	@alen: length of @addr
  *
  *	Release reference to a secondary unicast address and remove it
  *	from the device if the reference count drops to zero.
  *
  * 	The caller must hold the rtnl_mutex.
  */
-int dev_unicast_delete(struct net_device *dev, void *addr, int alen)
+int dev_unicast_delete(struct net_device *dev, void *addr)
 {
 	int err;
 
 	ASSERT_RTNL();
 
-	netif_addr_lock_bh(dev);
-	err = __dev_addr_delete(&dev->uc_list, &dev->uc_count, addr, alen, 0);
+	err = __hw_addr_del(&dev->uc_list, &dev->uc_count, addr,
+			    dev->addr_len, NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
-	netif_addr_unlock_bh(dev);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_delete);
@@ -3532,24 +3880,22 @@ EXPORT_SYMBOL(dev_unicast_delete);
  *	dev_unicast_add		- add a secondary unicast address
  *	@dev: device
  *	@addr: address to add
- *	@alen: length of @addr
  *
  *	Add a secondary unicast address to the device or increase
  *	the reference count if it already exists.
  *
  *	The caller must hold the rtnl_mutex.
  */
-int dev_unicast_add(struct net_device *dev, void *addr, int alen)
+int dev_unicast_add(struct net_device *dev, void *addr)
 {
 	int err;
 
 	ASSERT_RTNL();
 
-	netif_addr_lock_bh(dev);
-	err = __dev_addr_add(&dev->uc_list, &dev->uc_count, addr, alen, 0);
+	err = __hw_addr_add(&dev->uc_list, &dev->uc_count, addr,
+			    dev->addr_len, NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
-	netif_addr_unlock_bh(dev);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_add);
@@ -3606,8 +3952,7 @@ void __dev_addr_unsync(struct dev_addr_list **to, int *to_count,
  *	@from: source device
  *
  *	Add newly added addresses to the destination device and release
- *	addresses that have no users left. The source device must be
- *	locked by netif_tx_lock_bh.
+ *	addresses that have no users left.
  *
  *	This function is intended to be called from the dev->set_rx_mode
  *	function of layered software devices.
@@ -3616,12 +3961,15 @@ int dev_unicast_sync(struct net_device *to, struct net_device *from)
 {
 	int err = 0;
 
-	netif_addr_lock_bh(to);
-	err = __dev_addr_sync(&to->uc_list, &to->uc_count,
-			      &from->uc_list, &from->uc_count);
+	ASSERT_RTNL();
+
+	if (to->addr_len != from->addr_len)
+		return -EINVAL;
+
+	err = __hw_addr_sync(&to->uc_list, &to->uc_count,
+			     &from->uc_list, &from->uc_count, to->addr_len);
 	if (!err)
 		__dev_set_rx_mode(to);
-	netif_addr_unlock_bh(to);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_sync);
@@ -3637,18 +3985,33 @@ EXPORT_SYMBOL(dev_unicast_sync);
  */
 void dev_unicast_unsync(struct net_device *to, struct net_device *from)
 {
-	netif_addr_lock_bh(from);
-	netif_addr_lock(to);
+	ASSERT_RTNL();
 
-	__dev_addr_unsync(&to->uc_list, &to->uc_count,
-			  &from->uc_list, &from->uc_count);
-	__dev_set_rx_mode(to);
+	if (to->addr_len != from->addr_len)
+		return;
 
-	netif_addr_unlock(to);
-	netif_addr_unlock_bh(from);
+	__hw_addr_unsync(&to->uc_list, &to->uc_count,
+			 &from->uc_list, &from->uc_count, to->addr_len);
+	__dev_set_rx_mode(to);
 }
 EXPORT_SYMBOL(dev_unicast_unsync);
 
+static void dev_unicast_flush(struct net_device *dev)
+{
+	/* rtnl_mutex must be held here */
+
+	__hw_addr_flush(&dev->uc_list);
+	dev->uc_count = 0;
+}
+
+static void dev_unicast_init(struct net_device *dev)
+{
+	/* rtnl_mutex must be held here */
+
+	INIT_LIST_HEAD(&dev->uc_list);
+}
+
+
 static void __dev_addr_discard(struct dev_addr_list **list)
 {
 	struct dev_addr_list *tmp;
@@ -3667,9 +4030,6 @@ static void dev_addr_discard(struct net_device *dev)
 {
 	netif_addr_lock_bh(dev);
 
-	__dev_addr_discard(&dev->uc_list);
-	dev->uc_count = 0;
-
 	__dev_addr_discard(&dev->mc_list);
 	dev->mc_count = 0;
 
@@ -3853,7 +4213,7 @@ static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cm
 
 	switch (cmd) {
 		case SIOCGIFFLAGS:	/* Get interface flags */
-			ifr->ifr_flags = dev_get_flags(dev);
+			ifr->ifr_flags = (short) dev_get_flags(dev);
 			return 0;
 
 		case SIOCGIFMETRIC:	/* Get the metric on the interface
@@ -4262,6 +4622,7 @@ static void rollback_registered(struct net_device *dev)
 	/*
 	 *	Flush the unicast and multicast chains
 	 */
+	dev_unicast_flush(dev);
 	dev_addr_discard(dev);
 
 	if (dev->netdev_ops->ndo_uninit)
@@ -4333,39 +4694,6 @@ unsigned long netdev_fix_features(unsigned long features, const char *name)
 }
 EXPORT_SYMBOL(netdev_fix_features);
 
-/* Some devices need to (re-)set their netdev_ops inside
- * ->init() or similar.  If that happens, we have to setup
- * the compat pointers again.
- */
-void netdev_resync_ops(struct net_device *dev)
-{
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	const struct net_device_ops *ops = dev->netdev_ops;
-
-	dev->init = ops->ndo_init;
-	dev->uninit = ops->ndo_uninit;
-	dev->open = ops->ndo_open;
-	dev->change_rx_flags = ops->ndo_change_rx_flags;
-	dev->set_rx_mode = ops->ndo_set_rx_mode;
-	dev->set_multicast_list = ops->ndo_set_multicast_list;
-	dev->set_mac_address = ops->ndo_set_mac_address;
-	dev->validate_addr = ops->ndo_validate_addr;
-	dev->do_ioctl = ops->ndo_do_ioctl;
-	dev->set_config = ops->ndo_set_config;
-	dev->change_mtu = ops->ndo_change_mtu;
-	dev->neigh_setup = ops->ndo_neigh_setup;
-	dev->tx_timeout = ops->ndo_tx_timeout;
-	dev->get_stats = ops->ndo_get_stats;
-	dev->vlan_rx_register = ops->ndo_vlan_rx_register;
-	dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
-	dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ops->ndo_poll_controller;
-#endif
-#endif
-}
-EXPORT_SYMBOL(netdev_resync_ops);
-
 /**
  *	register_netdevice	- register a network device
  *	@dev: device to register
@@ -4405,23 +4733,6 @@ int register_netdevice(struct net_device *dev)
 
 	dev->iflink = -1;
 
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	/* Netdevice_ops API compatibility support.
-	 * This is temporary until all network devices are converted.
-	 */
-	if (dev->netdev_ops) {
-		netdev_resync_ops(dev);
-	} else {
-		char drivername[64];
-		pr_info("%s (%s): not using net_device_ops yet\n",
-			dev->name, netdev_drivername(dev, drivername, 64));
-
-		/* This works only because net_device_ops and the
-		   compatibility structure are the same. */
-		dev->netdev_ops = (void *) &(dev->init);
-	}
-#endif
-
 	/* Init, if this function is available */
 	if (dev->netdev_ops->ndo_init) {
 		ret = dev->netdev_ops->ndo_init(dev);
@@ -4707,13 +5018,30 @@ void netdev_run_todo(void)
  *	the internal statistics structure is used.
  */
 const struct net_device_stats *dev_get_stats(struct net_device *dev)
- {
+{
 	const struct net_device_ops *ops = dev->netdev_ops;
 
 	if (ops->ndo_get_stats)
 		return ops->ndo_get_stats(dev);
-	else
-		return &dev->stats;
+	else {
+		unsigned long tx_bytes = 0, tx_packets = 0, tx_dropped = 0;
+		struct net_device_stats *stats = &dev->stats;
+		unsigned int i;
+		struct netdev_queue *txq;
+
+		for (i = 0; i < dev->num_tx_queues; i++) {
+			txq = netdev_get_tx_queue(dev, i);
+			tx_bytes   += txq->tx_bytes;
+			tx_packets += txq->tx_packets;
+			tx_dropped += txq->tx_dropped;
+		}
+		if (tx_bytes || tx_packets || tx_dropped) {
+			stats->tx_bytes   = tx_bytes;
+			stats->tx_packets = tx_packets;
+			stats->tx_dropped = tx_dropped;
+		}
+		return stats;
+	}
 }
 EXPORT_SYMBOL(dev_get_stats);
 
@@ -4748,18 +5076,18 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 	struct netdev_queue *tx;
 	struct net_device *dev;
 	size_t alloc_size;
-	void *p;
+	struct net_device *p;
 
 	BUG_ON(strlen(name) >= sizeof(dev->name));
 
 	alloc_size = sizeof(struct net_device);
 	if (sizeof_priv) {
 		/* ensure 32-byte alignment of private area */
-		alloc_size = (alloc_size + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST;
+		alloc_size = ALIGN(alloc_size, NETDEV_ALIGN);
 		alloc_size += sizeof_priv;
 	}
 	/* ensure 32-byte alignment of whole construct */
-	alloc_size += NETDEV_ALIGN_CONST;
+	alloc_size += NETDEV_ALIGN - 1;
 
 	p = kzalloc(alloc_size, GFP_KERNEL);
 	if (!p) {
@@ -4771,13 +5099,17 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 	if (!tx) {
 		printk(KERN_ERR "alloc_netdev: Unable to allocate "
 		       "tx qdiscs.\n");
-		kfree(p);
-		return NULL;
+		goto free_p;
 	}
 
-	dev = (struct net_device *)
-		(((long)p + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
+	dev = PTR_ALIGN(p, NETDEV_ALIGN);
 	dev->padded = (char *)dev - (char *)p;
+
+	if (dev_addr_init(dev))
+		goto free_tx;
+
+	dev_unicast_init(dev);
+
 	dev_net_set(dev, &init_net);
 
 	dev->_tx = tx;
@@ -4789,9 +5121,17 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 	netdev_init_queues(dev);
 
 	INIT_LIST_HEAD(&dev->napi_list);
+	dev->priv_flags = IFF_XMIT_DST_RELEASE;
 	setup(dev);
 	strcpy(dev->name, name);
 	return dev;
+
+free_tx:
+	kfree(tx);
+
+free_p:
+	kfree(p);
+	return NULL;
 }
 EXPORT_SYMBOL(alloc_netdev_mq);
 
@@ -4811,6 +5151,9 @@ void free_netdev(struct net_device *dev)
 
 	kfree(dev->_tx);
 
+	/* Flush device addresses */
+	dev_addr_flush(dev);
+
 	list_for_each_entry_safe(p, n, &dev->napi_list, dev_list)
 		netif_napi_del(p);
 
@@ -4970,6 +5313,7 @@ int dev_change_net_namespace(struct net_device *dev, struct net *net, const char
 	/*
 	 *	Flush the unicast and multicast chains
 	 */
+	dev_unicast_flush(dev);
 	dev_addr_discard(dev);
 
 	netdev_unregister_kobject(dev);
@@ -5325,12 +5669,6 @@ EXPORT_SYMBOL(net_enable_timestamp);
 EXPORT_SYMBOL(net_disable_timestamp);
 EXPORT_SYMBOL(dev_get_flags);
 
-#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-EXPORT_SYMBOL(br_handle_frame_hook);
-EXPORT_SYMBOL(br_fdb_get_hook);
-EXPORT_SYMBOL(br_fdb_put_hook);
-#endif
-
 EXPORT_SYMBOL(dev_load);
 
 EXPORT_PER_CPU_SYMBOL(softnet_data);
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index b75b6cea49d..9d66fa953ab 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -22,8 +22,10 @@
 #include <linux/timer.h>
 #include <linux/bitops.h>
 #include <net/genetlink.h>
+#include <net/netevent.h>
 
 #include <trace/events/skb.h>
+#include <trace/events/napi.h>
 
 #include <asm/unaligned.h>
 
@@ -38,7 +40,8 @@ static void send_dm_alert(struct work_struct *unused);
  * and the work handle that will send up
  * netlink alerts
  */
-struct sock *dm_sock;
+static int trace_state = TRACE_OFF;
+static spinlock_t trace_state_lock = SPIN_LOCK_UNLOCKED;
 
 struct per_cpu_dm_data {
 	struct work_struct dm_alert_work;
@@ -47,11 +50,18 @@ struct per_cpu_dm_data {
 	struct timer_list send_timer;
 };
 
+struct dm_hw_stat_delta {
+	struct net_device *dev;
+	struct list_head list;
+	struct rcu_head rcu;
+	unsigned long last_drop_val;
+};
+
 static struct genl_family net_drop_monitor_family = {
 	.id             = GENL_ID_GENERATE,
 	.hdrsize        = 0,
 	.name           = "NET_DM",
-	.version        = 1,
+	.version        = 2,
 	.maxattr        = NET_DM_CMD_MAX,
 };
 
@@ -59,19 +69,24 @@ static DEFINE_PER_CPU(struct per_cpu_dm_data, dm_cpu_data);
 
 static int dm_hit_limit = 64;
 static int dm_delay = 1;
-
+static unsigned long dm_hw_check_delta = 2*HZ;
+static LIST_HEAD(hw_stats_list);
 
 static void reset_per_cpu_data(struct per_cpu_dm_data *data)
 {
 	size_t al;
 	struct net_dm_alert_msg *msg;
+	struct nlattr *nla;
 
 	al = sizeof(struct net_dm_alert_msg);
 	al += dm_hit_limit * sizeof(struct net_dm_drop_point);
+	al += sizeof(struct nlattr);
+
 	data->skb = genlmsg_new(al, GFP_KERNEL);
 	genlmsg_put(data->skb, 0, 0, &net_drop_monitor_family,
 			0, NET_DM_CMD_ALERT);
-	msg = __nla_reserve_nohdr(data->skb, sizeof(struct net_dm_alert_msg));
+	nla = nla_reserve(data->skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
+	msg = nla_data(nla);
 	memset(msg, 0, al);
 	atomic_set(&data->dm_hit_count, dm_hit_limit);
 }
@@ -111,10 +126,11 @@ static void sched_send_work(unsigned long unused)
 	schedule_work(&data->dm_alert_work);
 }
 
-static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
+static void trace_drop_common(struct sk_buff *skb, void *location)
 {
 	struct net_dm_alert_msg *msg;
 	struct nlmsghdr *nlh;
+	struct nlattr *nla;
 	int i;
 	struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data);
 
@@ -127,7 +143,8 @@ static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
 	}
 
 	nlh = (struct nlmsghdr *)data->skb->data;
-	msg = genlmsg_data(nlmsg_data(nlh));
+	nla = genlmsg_data(nlmsg_data(nlh));
+	msg = nla_data(nla);
 	for (i = 0; i < msg->entries; i++) {
 		if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) {
 			msg->points[i].count++;
@@ -139,6 +156,7 @@ static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
 	 * We need to create a new entry
 	 */
 	__nla_reserve_nohdr(data->skb, sizeof(struct net_dm_drop_point));
+	nla->nla_len += NLA_ALIGN(sizeof(struct net_dm_drop_point));
 	memcpy(msg->points[msg->entries].pc, &location, sizeof(void *));
 	msg->points[msg->entries].count = 1;
 	msg->entries++;
@@ -152,24 +170,80 @@ out:
 	return;
 }
 
+static void trace_kfree_skb_hit(struct sk_buff *skb, void *location)
+{
+	trace_drop_common(skb, location);
+}
+
+static void trace_napi_poll_hit(struct napi_struct *napi)
+{
+	struct dm_hw_stat_delta *new_stat;
+
+	/*
+	 * Ratelimit our check time to dm_hw_check_delta jiffies
+	 */
+	if (!time_after(jiffies, napi->dev->last_rx + dm_hw_check_delta))
+		return;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(new_stat, &hw_stats_list, list) {
+		if ((new_stat->dev == napi->dev)  &&
+		    (napi->dev->stats.rx_dropped != new_stat->last_drop_val)) {
+			trace_drop_common(NULL, NULL);
+			new_stat->last_drop_val = napi->dev->stats.rx_dropped;
+			break;
+		}
+	}
+	rcu_read_unlock();
+}
+
+
+static void free_dm_hw_stat(struct rcu_head *head)
+{
+	struct dm_hw_stat_delta *n;
+	n = container_of(head, struct dm_hw_stat_delta, rcu);
+	kfree(n);
+}
+
 static int set_all_monitor_traces(int state)
 {
 	int rc = 0;
+	struct dm_hw_stat_delta *new_stat = NULL;
+	struct dm_hw_stat_delta *temp;
+
+	spin_lock(&trace_state_lock);
 
 	switch (state) {
 	case TRACE_ON:
 		rc |= register_trace_kfree_skb(trace_kfree_skb_hit);
+		rc |= register_trace_napi_poll(trace_napi_poll_hit);
 		break;
 	case TRACE_OFF:
 		rc |= unregister_trace_kfree_skb(trace_kfree_skb_hit);
+		rc |= unregister_trace_napi_poll(trace_napi_poll_hit);
 
 		tracepoint_synchronize_unregister();
+
+		/*
+		 * Clean the device list
+		 */
+		list_for_each_entry_safe(new_stat, temp, &hw_stats_list, list) {
+			if (new_stat->dev == NULL) {
+				list_del_rcu(&new_stat->list);
+				call_rcu(&new_stat->rcu, free_dm_hw_stat);
+			}
+		}
 		break;
 	default:
 		rc = 1;
 		break;
 	}
 
+	if (!rc)
+		trace_state = state;
+
+	spin_unlock(&trace_state_lock);
+
 	if (rc)
 		return -EINPROGRESS;
 	return rc;
@@ -197,6 +271,44 @@ static int net_dm_cmd_trace(struct sk_buff *skb,
 	return -ENOTSUPP;
 }
 
+static int dropmon_net_event(struct notifier_block *ev_block,
+			unsigned long event, void *ptr)
+{
+	struct net_device *dev = ptr;
+	struct dm_hw_stat_delta *new_stat = NULL;
+	struct dm_hw_stat_delta *tmp;
+
+	switch (event) {
+	case NETDEV_REGISTER:
+		new_stat = kzalloc(sizeof(struct dm_hw_stat_delta), GFP_KERNEL);
+
+		if (!new_stat)
+			goto out;
+
+		new_stat->dev = dev;
+		INIT_RCU_HEAD(&new_stat->rcu);
+		spin_lock(&trace_state_lock);
+		list_add_rcu(&new_stat->list, &hw_stats_list);
+		spin_unlock(&trace_state_lock);
+		break;
+	case NETDEV_UNREGISTER:
+		spin_lock(&trace_state_lock);
+		list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) {
+			if (new_stat->dev == dev) {
+				new_stat->dev = NULL;
+				if (trace_state == TRACE_OFF) {
+					list_del_rcu(&new_stat->list);
+					call_rcu(&new_stat->rcu, free_dm_hw_stat);
+					break;
+				}
+			}
+		}
+		spin_unlock(&trace_state_lock);
+		break;
+	}
+out:
+	return NOTIFY_DONE;
+}
 
 static struct genl_ops dropmon_ops[] = {
 	{
@@ -213,6 +325,10 @@ static struct genl_ops dropmon_ops[] = {
 	},
 };
 
+static struct notifier_block dropmon_net_notifier = {
+	.notifier_call = dropmon_net_event
+};
+
 static int __init init_net_drop_monitor(void)
 {
 	int cpu;
@@ -236,12 +352,18 @@ static int __init init_net_drop_monitor(void)
 		ret = genl_register_ops(&net_drop_monitor_family,
 					&dropmon_ops[i]);
 		if (ret) {
-			printk(KERN_CRIT "failed to register operation %d\n",
+			printk(KERN_CRIT "Failed to register operation %d\n",
 				dropmon_ops[i].cmd);
 			goto out_unreg;
 		}
 	}
 
+	rc = register_netdevice_notifier(&dropmon_net_notifier);
+	if (rc < 0) {
+		printk(KERN_CRIT "Failed to register netdevice notifier\n");
+		goto out_unreg;
+	}
+
 	rc = 0;
 
 	for_each_present_cpu(cpu) {
@@ -252,6 +374,7 @@ static int __init init_net_drop_monitor(void)
 		data->send_timer.data = cpu;
 		data->send_timer.function = sched_send_work;
 	}
+
 	goto out;
 
 out_unreg:
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 98691e1466b..bd309384f8b 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -299,7 +299,7 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
 	} else if (rule->action == FR_ACT_GOTO)
 		goto errout_free;
 
-	err = ops->configure(rule, skb, nlh, frh, tb);
+	err = ops->configure(rule, skb, frh, tb);
 	if (err < 0)
 		goto errout_free;
 
@@ -500,7 +500,7 @@ static int fib_nl_fill_rule(struct sk_buff *skb, struct fib_rule *rule,
 	if (rule->target)
 		NLA_PUT_U32(skb, FRA_GOTO, rule->target);
 
-	if (ops->fill(rule, skb, nlh, frh) < 0)
+	if (ops->fill(rule, skb, frh) < 0)
 		goto nla_put_failure;
 
 	return nlmsg_end(skb, nlh);
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 6d62d4618cf..78e5bfc454a 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -128,12 +128,12 @@ static void est_timer(unsigned long arg)
 		npackets = e->bstats->packets;
 		brate = (nbytes - e->last_bytes)<<(7 - idx);
 		e->last_bytes = nbytes;
-		e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log;
+		e->avbps += (brate >> e->ewma_log) - (e->avbps >> e->ewma_log);
 		e->rate_est->bps = (e->avbps+0xF)>>5;
 
 		rate = (npackets - e->last_packets)<<(12 - idx);
 		e->last_packets = npackets;
-		e->avpps += ((long)rate - (long)e->avpps) >> e->ewma_log;
+		e->avpps += (rate >> e->ewma_log) - (e->avpps >> e->ewma_log);
 		e->rate_est->pps = (e->avpps+0x1FF)>>10;
 skip:
 		read_unlock(&est_lock);
diff --git a/net/core/iovec.c b/net/core/iovec.c
index 4c9c0121c9d..16ad45d4882 100644
--- a/net/core/iovec.c
+++ b/net/core/iovec.c
@@ -98,6 +98,31 @@ int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len)
 }
 
 /*
+ *	Copy kernel to iovec. Returns -EFAULT on error.
+ */
+
+int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata,
+		      int offset, int len)
+{
+	int copy;
+	for (; len > 0; ++iov) {
+		/* Skip over the finished iovecs */
+		if (unlikely(offset >= iov->iov_len)) {
+			offset -= iov->iov_len;
+			continue;
+		}
+		copy = min_t(unsigned int, iov->iov_len - offset, len);
+		if (copy_to_user(iov->iov_base + offset, kdata, copy))
+			return -EFAULT;
+		offset = 0;
+		kdata += copy;
+		len -= copy;
+	}
+
+	return 0;
+}
+
+/*
  *	Copy iovec to kernel. Returns -EFAULT on error.
  *
  *	Note: this modifies the original iovec.
@@ -122,10 +147,11 @@ int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len)
 }
 
 /*
- *	For use with ip_build_xmit
+ *	Copy iovec from kernel. Returns -EFAULT on error.
  */
-int memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
-			int len)
+
+int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
+			int offset, int len)
 {
 	/* Skip over the finished iovecs */
 	while (offset >= iov->iov_len) {
@@ -236,3 +262,4 @@ EXPORT_SYMBOL(csum_partial_copy_fromiovecend);
 EXPORT_SYMBOL(memcpy_fromiovec);
 EXPORT_SYMBOL(memcpy_fromiovecend);
 EXPORT_SYMBOL(memcpy_toiovec);
+EXPORT_SYMBOL(memcpy_toiovecend);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index a1cbce7fdae..163b4f5b036 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -771,6 +771,28 @@ static __inline__ int neigh_max_probes(struct neighbour *n)
 		p->ucast_probes + p->app_probes + p->mcast_probes);
 }
 
+static void neigh_invalidate(struct neighbour *neigh)
+{
+	struct sk_buff *skb;
+
+	NEIGH_CACHE_STAT_INC(neigh->tbl, res_failed);
+	NEIGH_PRINTK2("neigh %p is failed.\n", neigh);
+	neigh->updated = jiffies;
+
+	/* It is very thin place. report_unreachable is very complicated
+	   routine. Particularly, it can hit the same neighbour entry!
+
+	   So that, we try to be accurate and avoid dead loop. --ANK
+	 */
+	while (neigh->nud_state == NUD_FAILED &&
+	       (skb = __skb_dequeue(&neigh->arp_queue)) != NULL) {
+		write_unlock(&neigh->lock);
+		neigh->ops->error_report(neigh, skb);
+		write_lock(&neigh->lock);
+	}
+	skb_queue_purge(&neigh->arp_queue);
+}
+
 /* Called when a timer expires for a neighbour entry. */
 
 static void neigh_timer_handler(unsigned long arg)
@@ -835,26 +857,9 @@ static void neigh_timer_handler(unsigned long arg)
 
 	if ((neigh->nud_state & (NUD_INCOMPLETE | NUD_PROBE)) &&
 	    atomic_read(&neigh->probes) >= neigh_max_probes(neigh)) {
-		struct sk_buff *skb;
-
 		neigh->nud_state = NUD_FAILED;
-		neigh->updated = jiffies;
 		notify = 1;
-		NEIGH_CACHE_STAT_INC(neigh->tbl, res_failed);
-		NEIGH_PRINTK2("neigh %p is failed.\n", neigh);
-
-		/* It is very thin place. report_unreachable is very complicated
-		   routine. Particularly, it can hit the same neighbour entry!
-
-		   So that, we try to be accurate and avoid dead loop. --ANK
-		 */
-		while (neigh->nud_state == NUD_FAILED &&
-		       (skb = __skb_dequeue(&neigh->arp_queue)) != NULL) {
-			write_unlock(&neigh->lock);
-			neigh->ops->error_report(neigh, skb);
-			write_lock(&neigh->lock);
-		}
-		skb_queue_purge(&neigh->arp_queue);
+		neigh_invalidate(neigh);
 	}
 
 	if (neigh->nud_state & NUD_IN_TIMER) {
@@ -1001,6 +1006,11 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new,
 		neigh->nud_state = new;
 		err = 0;
 		notify = old & NUD_VALID;
+		if ((old & (NUD_INCOMPLETE | NUD_PROBE)) &&
+		    (new & NUD_FAILED)) {
+			neigh_invalidate(neigh);
+			notify = 1;
+		}
 		goto out;
 	}
 
@@ -1088,8 +1098,8 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new,
 			struct neighbour *n1 = neigh;
 			write_unlock_bh(&neigh->lock);
 			/* On shaper/eql skb->dst->neighbour != neigh :( */
-			if (skb->dst && skb->dst->neighbour)
-				n1 = skb->dst->neighbour;
+			if (skb_dst(skb) && skb_dst(skb)->neighbour)
+				n1 = skb_dst(skb)->neighbour;
 			n1->output(skb);
 			write_lock_bh(&neigh->lock);
 		}
@@ -1182,7 +1192,7 @@ EXPORT_SYMBOL(neigh_compat_output);
 
 int neigh_resolve_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh;
 	int rc = 0;
 
@@ -1229,7 +1239,7 @@ EXPORT_SYMBOL(neigh_resolve_output);
 int neigh_connected_output(struct sk_buff *skb)
 {
 	int err;
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
 
@@ -1298,8 +1308,7 @@ void pneigh_enqueue(struct neigh_table *tbl, struct neigh_parms *p,
 		if (time_before(tbl->proxy_timer.expires, sched_next))
 			sched_next = tbl->proxy_timer.expires;
 	}
-	dst_release(skb->dst);
-	skb->dst = NULL;
+	skb_dst_drop(skb);
 	dev_hold(skb->dev);
 	__skb_queue_tail(&tbl->proxy_queue, skb);
 	mod_timer(&tbl->proxy_timer, sched_next);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 2da59a0ac4a..3994680c08b 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -78,7 +78,7 @@ static ssize_t netdev_store(struct device *dev, struct device_attribute *attr,
 		goto err;
 
 	if (!rtnl_trylock())
-		return -ERESTARTSYS;
+		return restart_syscall();
 
 	if (dev_isalive(net)) {
 		if ((ret = (*set)(net, new)) == 0)
@@ -225,7 +225,8 @@ static ssize_t store_ifalias(struct device *dev, struct device_attribute *attr,
 	if (len >  0 && buf[len - 1] == '\n')
 		--count;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	ret = dev_set_alias(netdev, buf, count);
 	rtnl_unlock();
 
@@ -238,7 +239,8 @@ static ssize_t show_ifalias(struct device *dev,
 	const struct net_device *netdev = to_net_dev(dev);
 	ssize_t ret = 0;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (netdev->ifalias)
 		ret = sprintf(buf, "%s\n", netdev->ifalias);
 	rtnl_unlock();
@@ -497,7 +499,6 @@ int netdev_register_kobject(struct net_device *net)
 	dev->platform_data = net;
 	dev->groups = groups;
 
-	BUILD_BUG_ON(BUS_ID_SIZE < IFNAMSIZ);
 	dev_set_name(dev, "%s", net->name);
 
 #ifdef CONFIG_SYSFS
diff --git a/net/core/net-traces.c b/net/core/net-traces.c
index 499a67eaf3a..f1e982c508b 100644
--- a/net/core/net-traces.c
+++ b/net/core/net-traces.c
@@ -25,5 +25,8 @@
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/skb.h>
+#include <trace/events/napi.h>
 
 EXPORT_TRACEPOINT_SYMBOL_GPL(kfree_skb);
+
+EXPORT_TRACEPOINT_SYMBOL_GPL(napi_poll);
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index e3bebd36f05..b7292a2719d 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -115,41 +115,34 @@ static void net_free(struct net *net)
 	kmem_cache_free(net_cachep, net);
 }
 
-struct net *copy_net_ns(unsigned long flags, struct net *old_net)
+static struct net *net_create(void)
 {
-	struct net *new_net = NULL;
-	int err;
-
-	get_net(old_net);
-
-	if (!(flags & CLONE_NEWNET))
-		return old_net;
-
-	err = -ENOMEM;
-	new_net = net_alloc();
-	if (!new_net)
-		goto out_err;
+	struct net *net;
+	int rv;
 
+	net = net_alloc();
+	if (!net)
+		return ERR_PTR(-ENOMEM);
 	mutex_lock(&net_mutex);
-	err = setup_net(new_net);
-	if (!err) {
+	rv = setup_net(net);
+	if (rv == 0) {
 		rtnl_lock();
-		list_add_tail(&new_net->list, &net_namespace_list);
+		list_add_tail(&net->list, &net_namespace_list);
 		rtnl_unlock();
 	}
 	mutex_unlock(&net_mutex);
+	if (rv < 0) {
+		net_free(net);
+		return ERR_PTR(rv);
+	}
+	return net;
+}
 
-	if (err)
-		goto out_free;
-out:
-	put_net(old_net);
-	return new_net;
-
-out_free:
-	net_free(new_net);
-out_err:
-	new_net = ERR_PTR(err);
-	goto out;
+struct net *copy_net_ns(unsigned long flags, struct net *old_net)
+{
+	if (!(flags & CLONE_NEWNET))
+		return get_net(old_net);
+	return net_create();
 }
 
 static void cleanup_net(struct work_struct *work)
@@ -203,9 +196,7 @@ struct net *copy_net_ns(unsigned long flags, struct net *old_net)
 static int __init net_ns_init(void)
 {
 	struct net_generic *ng;
-	int err;
 
-	printk(KERN_INFO "net_namespace: %zd bytes\n", sizeof(struct net));
 #ifdef CONFIG_NET_NS
 	net_cachep = kmem_cache_create("net_namespace", sizeof(struct net),
 					SMP_CACHE_BYTES,
@@ -224,15 +215,14 @@ static int __init net_ns_init(void)
 	rcu_assign_pointer(init_net.gen, ng);
 
 	mutex_lock(&net_mutex);
-	err = setup_net(&init_net);
+	if (setup_net(&init_net))
+		panic("Could not setup the initial network namespace");
 
 	rtnl_lock();
 	list_add_tail(&init_net.list, &net_namespace_list);
 	rtnl_unlock();
 
 	mutex_unlock(&net_mutex);
-	if (err)
-		panic("Could not setup the initial network namespace");
 
 	return 0;
 }
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 64f51eec657..9675f312830 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -24,6 +24,7 @@
 #include <net/tcp.h>
 #include <net/udp.h>
 #include <asm/unaligned.h>
+#include <trace/events/napi.h>
 
 /*
  * We maintain a small pool of fully-sized skbs, to make sure the
@@ -137,6 +138,7 @@ static int poll_one_napi(struct netpoll_info *npinfo,
 	set_bit(NAPI_STATE_NPSVC, &napi->state);
 
 	work = napi->poll(napi, budget);
+	trace_napi_poll(napi);
 
 	clear_bit(NAPI_STATE_NPSVC, &napi->state);
 	atomic_dec(&trapped);
@@ -300,8 +302,11 @@ static void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
 		for (tries = jiffies_to_usecs(1)/USEC_PER_POLL;
 		     tries > 0; --tries) {
 			if (__netif_tx_trylock(txq)) {
-				if (!netif_tx_queue_stopped(txq))
+				if (!netif_tx_queue_stopped(txq)) {
 					status = ops->ndo_start_xmit(skb, dev);
+					if (status == NETDEV_TX_OK)
+						txq_trans_update(txq);
+				}
 				__netif_tx_unlock(txq);
 
 				if (status == NETDEV_TX_OK)
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 0666a827bc6..19b8c20e98a 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3438,6 +3438,7 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
 	      retry_now:
 		ret = (*xmit)(pkt_dev->skb, odev);
 		if (likely(ret == NETDEV_TX_OK)) {
+			txq_trans_update(txq);
 			pkt_dev->last_ok = 1;
 			pkt_dev->sofar++;
 			pkt_dev->seq_num++;
@@ -3690,8 +3691,7 @@ out1:
 #ifdef CONFIG_XFRM
 	free_SAs(pkt_dev);
 #endif
-	if (pkt_dev->flows)
-		vfree(pkt_dev->flows);
+	vfree(pkt_dev->flows);
 	kfree(pkt_dev);
 	return err;
 }
@@ -3790,8 +3790,7 @@ static int pktgen_remove_device(struct pktgen_thread *t,
 #ifdef CONFIG_XFRM
 	free_SAs(pkt_dev);
 #endif
-	if (pkt_dev->flows)
-		vfree(pkt_dev->flows);
+	vfree(pkt_dev->flows);
 	kfree(pkt_dev);
 	return 0;
 }
diff --git a/net/core/skb_dma_map.c b/net/core/skb_dma_map.c
index 86234923a3b..79687dfd695 100644
--- a/net/core/skb_dma_map.c
+++ b/net/core/skb_dma_map.c
@@ -20,7 +20,7 @@ int skb_dma_map(struct device *dev, struct sk_buff *skb,
 	if (dma_mapping_error(dev, map))
 		goto out_err;
 
-	sp->dma_maps[0] = map;
+	sp->dma_head = map;
 	for (i = 0; i < sp->nr_frags; i++) {
 		skb_frag_t *fp = &sp->frags[i];
 
@@ -28,9 +28,8 @@ int skb_dma_map(struct device *dev, struct sk_buff *skb,
 				   fp->size, dir);
 		if (dma_mapping_error(dev, map))
 			goto unwind;
-		sp->dma_maps[i + 1] = map;
+		sp->dma_maps[i] = map;
 	}
-	sp->num_dma_maps = i + 1;
 
 	return 0;
 
@@ -38,10 +37,10 @@ unwind:
 	while (--i >= 0) {
 		skb_frag_t *fp = &sp->frags[i];
 
-		dma_unmap_page(dev, sp->dma_maps[i + 1],
+		dma_unmap_page(dev, sp->dma_maps[i],
 			       fp->size, dir);
 	}
-	dma_unmap_single(dev, sp->dma_maps[0],
+	dma_unmap_single(dev, sp->dma_head,
 			 skb_headlen(skb), dir);
 out_err:
 	return -ENOMEM;
@@ -54,12 +53,12 @@ void skb_dma_unmap(struct device *dev, struct sk_buff *skb,
 	struct skb_shared_info *sp = skb_shinfo(skb);
 	int i;
 
-	dma_unmap_single(dev, sp->dma_maps[0],
+	dma_unmap_single(dev, sp->dma_head,
 			 skb_headlen(skb), dir);
 	for (i = 0; i < sp->nr_frags; i++) {
 		skb_frag_t *fp = &sp->frags[i];
 
-		dma_unmap_page(dev, sp->dma_maps[i + 1],
+		dma_unmap_page(dev, sp->dma_maps[i],
 			       fp->size, dir);
 	}
 }
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index c2e4fb8f354..5c93435b034 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -39,6 +39,7 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/kmemcheck.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/in.h>
@@ -201,6 +202,8 @@ struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask,
 	skb->data = data;
 	skb_reset_tail_pointer(skb);
 	skb->end = skb->tail + size;
+	kmemcheck_annotate_bitfield(skb, flags1);
+	kmemcheck_annotate_bitfield(skb, flags2);
 	/* make sure we initialize shinfo sequentially */
 	shinfo = skb_shinfo(skb);
 	atomic_set(&shinfo->dataref, 1);
@@ -210,13 +213,15 @@ struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask,
 	shinfo->gso_type = 0;
 	shinfo->ip6_frag_id = 0;
 	shinfo->tx_flags.flags = 0;
-	shinfo->frag_list = NULL;
+	skb_frag_list_init(skb);
 	memset(&shinfo->hwtstamps, 0, sizeof(shinfo->hwtstamps));
 
 	if (fclone) {
 		struct sk_buff *child = skb + 1;
 		atomic_t *fclone_ref = (atomic_t *) (child + 1);
 
+		kmemcheck_annotate_bitfield(child, flags1);
+		kmemcheck_annotate_bitfield(child, flags2);
 		skb->fclone = SKB_FCLONE_ORIG;
 		atomic_set(fclone_ref, 1);
 
@@ -323,7 +328,7 @@ static void skb_clone_fraglist(struct sk_buff *skb)
 {
 	struct sk_buff *list;
 
-	for (list = skb_shinfo(skb)->frag_list; list; list = list->next)
+	skb_walk_frags(skb, list)
 		skb_get(list);
 }
 
@@ -338,7 +343,7 @@ static void skb_release_data(struct sk_buff *skb)
 				put_page(skb_shinfo(skb)->frags[i].page);
 		}
 
-		if (skb_shinfo(skb)->frag_list)
+		if (skb_has_frags(skb))
 			skb_drop_fraglist(skb);
 
 		kfree(skb->head);
@@ -381,7 +386,7 @@ static void kfree_skbmem(struct sk_buff *skb)
 
 static void skb_release_head_state(struct sk_buff *skb)
 {
-	dst_release(skb->dst);
+	skb_dst_drop(skb);
 #ifdef CONFIG_XFRM
 	secpath_put(skb->sp);
 #endif
@@ -503,7 +508,7 @@ int skb_recycle_check(struct sk_buff *skb, int skb_size)
 	shinfo->gso_type = 0;
 	shinfo->ip6_frag_id = 0;
 	shinfo->tx_flags.flags = 0;
-	shinfo->frag_list = NULL;
+	skb_frag_list_init(skb);
 	memset(&shinfo->hwtstamps, 0, sizeof(shinfo->hwtstamps));
 
 	memset(skb, 0, offsetof(struct sk_buff, tail));
@@ -521,13 +526,12 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
 	new->transport_header	= old->transport_header;
 	new->network_header	= old->network_header;
 	new->mac_header		= old->mac_header;
-	new->dst		= dst_clone(old->dst);
+	skb_dst_set(new, dst_clone(skb_dst(old)));
 #ifdef CONFIG_XFRM
 	new->sp			= secpath_get(old->sp);
 #endif
 	memcpy(new->cb, old->cb, sizeof(old->cb));
-	new->csum_start		= old->csum_start;
-	new->csum_offset	= old->csum_offset;
+	new->csum		= old->csum;
 	new->local_df		= old->local_df;
 	new->pkt_type		= old->pkt_type;
 	new->ip_summed		= old->ip_summed;
@@ -538,6 +542,7 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
 #endif
 	new->protocol		= old->protocol;
 	new->mark		= old->mark;
+	new->iif		= old->iif;
 	__nf_copy(new, old);
 #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
     defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
@@ -550,10 +555,17 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
 #endif
 #endif
 	new->vlan_tci		= old->vlan_tci;
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	new->do_not_encrypt	= old->do_not_encrypt;
+#endif
 
 	skb_copy_secmark(new, old);
 }
 
+/*
+ * You should not add any new code to this function.  Add it to
+ * __copy_skb_header above instead.
+ */
 static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
 {
 #define C(x) n->x = skb->x
@@ -569,16 +581,11 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
 	n->cloned = 1;
 	n->nohdr = 0;
 	n->destructor = NULL;
-	C(iif);
 	C(tail);
 	C(end);
 	C(head);
 	C(data);
 	C(truesize);
-#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
-	C(do_not_encrypt);
-	C(requeue);
-#endif
 	atomic_set(&n->users, 1);
 
 	atomic_inc(&(skb_shinfo(skb)->dataref));
@@ -633,6 +640,9 @@ struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask)
 		n = kmem_cache_alloc(skbuff_head_cache, gfp_mask);
 		if (!n)
 			return NULL;
+
+		kmemcheck_annotate_bitfield(n, flags1);
+		kmemcheck_annotate_bitfield(n, flags2);
 		n->fclone = SKB_FCLONE_UNAVAILABLE;
 	}
 
@@ -755,7 +765,7 @@ struct sk_buff *pskb_copy(struct sk_buff *skb, gfp_t gfp_mask)
 		skb_shinfo(n)->nr_frags = i;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
+	if (skb_has_frags(skb)) {
 		skb_shinfo(n)->frag_list = skb_shinfo(skb)->frag_list;
 		skb_clone_fraglist(n);
 	}
@@ -818,7 +828,7 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
 		get_page(skb_shinfo(skb)->frags[i].page);
 
-	if (skb_shinfo(skb)->frag_list)
+	if (skb_has_frags(skb))
 		skb_clone_fraglist(skb);
 
 	skb_release_data(skb);
@@ -1090,7 +1100,7 @@ drop_pages:
 		for (; i < nfrags; i++)
 			put_page(skb_shinfo(skb)->frags[i].page);
 
-		if (skb_shinfo(skb)->frag_list)
+		if (skb_has_frags(skb))
 			skb_drop_fraglist(skb);
 		goto done;
 	}
@@ -1185,7 +1195,7 @@ unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta)
 	/* Optimization: no fragments, no reasons to preestimate
 	 * size of pulled pages. Superb.
 	 */
-	if (!skb_shinfo(skb)->frag_list)
+	if (!skb_has_frags(skb))
 		goto pull_pages;
 
 	/* Estimate size of pulled pages. */
@@ -1282,8 +1292,9 @@ EXPORT_SYMBOL(__pskb_pull_tail);
 
 int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
 {
-	int i, copy;
 	int start = skb_headlen(skb);
+	struct sk_buff *frag_iter;
+	int i, copy;
 
 	if (offset > (int)skb->len - len)
 		goto fault;
@@ -1325,28 +1336,23 @@ int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				if (skb_copy_bits(list, offset - start,
-						  to, copy))
-					goto fault;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-				to     += copy;
-			}
-			start = end;
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_copy_bits(frag_iter, offset - start, to, copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			to     += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
@@ -1531,6 +1537,7 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
 		.ops = &sock_pipe_buf_ops,
 		.spd_release = sock_spd_release,
 	};
+	struct sk_buff *frag_iter;
 	struct sock *sk = skb->sk;
 
 	/*
@@ -1545,13 +1552,11 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
 	/*
 	 * now see if we have a frag_list to map
 	 */
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list && tlen; list = list->next) {
-			if (__skb_splice_bits(list, &offset, &tlen, &spd, sk))
-				break;
-		}
+	skb_walk_frags(skb, frag_iter) {
+		if (!tlen)
+			break;
+		if (__skb_splice_bits(frag_iter, &offset, &tlen, &spd, sk))
+			break;
 	}
 
 done:
@@ -1590,8 +1595,9 @@ done:
 
 int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len)
 {
-	int i, copy;
 	int start = skb_headlen(skb);
+	struct sk_buff *frag_iter;
+	int i, copy;
 
 	if (offset > (int)skb->len - len)
 		goto fault;
@@ -1632,28 +1638,24 @@ int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len)
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				if (skb_store_bits(list, offset - start,
-						   from, copy))
-					goto fault;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-				from += copy;
-			}
-			start = end;
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			if (skb_store_bits(frag_iter, offset - start,
+					   from, copy))
+				goto fault;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
+			from += copy;
 		}
+		start = end;
 	}
 	if (!len)
 		return 0;
@@ -1670,6 +1672,7 @@ __wsum skb_checksum(const struct sk_buff *skb, int offset,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 	int pos = 0;
 
 	/* Checksum header. */
@@ -1709,29 +1712,25 @@ __wsum skb_checksum(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				__wsum csum2;
-				if (copy > len)
-					copy = len;
-				csum2 = skb_checksum(list, offset - start,
-						     copy, 0);
-				csum = csum_block_add(csum, csum2, pos);
-				if ((len -= copy) == 0)
-					return csum;
-				offset += copy;
-				pos    += copy;
-			}
-			start = end;
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			__wsum csum2;
+			if (copy > len)
+				copy = len;
+			csum2 = skb_checksum(frag_iter, offset - start,
+					     copy, 0);
+			csum = csum_block_add(csum, csum2, pos);
+			if ((len -= copy) == 0)
+				return csum;
+			offset += copy;
+			pos    += copy;
 		}
+		start = end;
 	}
 	BUG_ON(len);
 
@@ -1746,6 +1745,7 @@ __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 	int pos = 0;
 
 	/* Copy header. */
@@ -1790,31 +1790,27 @@ __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	skb_walk_frags(skb, frag_iter) {
+		__wsum csum2;
+		int end;
 
-		for (; list; list = list->next) {
-			__wsum csum2;
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				csum2 = skb_copy_and_csum_bits(list,
-							       offset - start,
-							       to, copy, 0);
-				csum = csum_block_add(csum, csum2, pos);
-				if ((len -= copy) == 0)
-					return csum;
-				offset += copy;
-				to     += copy;
-				pos    += copy;
-			}
-			start = end;
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			csum2 = skb_copy_and_csum_bits(frag_iter,
+						       offset - start,
+						       to, copy, 0);
+			csum = csum_block_add(csum, csum2, pos);
+			if ((len -= copy) == 0)
+				return csum;
+			offset += copy;
+			to     += copy;
+			pos    += copy;
 		}
+		start = end;
 	}
 	BUG_ON(len);
 	return csum;
@@ -2324,8 +2320,7 @@ next_skb:
 		st->frag_data = NULL;
 	}
 
-	if (st->root_skb == st->cur_skb &&
-	    skb_shinfo(st->root_skb)->frag_list) {
+	if (st->root_skb == st->cur_skb && skb_has_frags(st->root_skb)) {
 		st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
 		st->frag_idx = 0;
 		goto next_skb;
@@ -2636,7 +2631,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 			} else
 				skb_get(fskb2);
 
-			BUG_ON(skb_shinfo(nskb)->frag_list);
+			SKB_FRAG_ASSERT(nskb);
 			skb_shinfo(nskb)->frag_list = fskb2;
 		}
 
@@ -2661,30 +2656,40 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 {
 	struct sk_buff *p = *head;
 	struct sk_buff *nskb;
+	struct skb_shared_info *skbinfo = skb_shinfo(skb);
+	struct skb_shared_info *pinfo = skb_shinfo(p);
 	unsigned int headroom;
 	unsigned int len = skb_gro_len(skb);
+	unsigned int offset = skb_gro_offset(skb);
+	unsigned int headlen = skb_headlen(skb);
 
 	if (p->len + len >= 65536)
 		return -E2BIG;
 
-	if (skb_shinfo(p)->frag_list)
+	if (pinfo->frag_list)
 		goto merge;
-	else if (skb_headlen(skb) <= skb_gro_offset(skb)) {
-		if (skb_shinfo(p)->nr_frags + skb_shinfo(skb)->nr_frags >
-		    MAX_SKB_FRAGS)
+	else if (headlen <= offset) {
+		skb_frag_t *frag;
+		skb_frag_t *frag2;
+		int i = skbinfo->nr_frags;
+		int nr_frags = pinfo->nr_frags + i;
+
+		offset -= headlen;
+
+		if (nr_frags > MAX_SKB_FRAGS)
 			return -E2BIG;
 
-		skb_shinfo(skb)->frags[0].page_offset +=
-			skb_gro_offset(skb) - skb_headlen(skb);
-		skb_shinfo(skb)->frags[0].size -=
-			skb_gro_offset(skb) - skb_headlen(skb);
+		pinfo->nr_frags = nr_frags;
+		skbinfo->nr_frags = 0;
 
-		memcpy(skb_shinfo(p)->frags + skb_shinfo(p)->nr_frags,
-		       skb_shinfo(skb)->frags,
-		       skb_shinfo(skb)->nr_frags * sizeof(skb_frag_t));
+		frag = pinfo->frags + nr_frags;
+		frag2 = skbinfo->frags + i;
+		do {
+			*--frag = *--frag2;
+		} while (--i);
 
-		skb_shinfo(p)->nr_frags += skb_shinfo(skb)->nr_frags;
-		skb_shinfo(skb)->nr_frags = 0;
+		frag->page_offset += offset;
+		frag->size -= offset;
 
 		skb->truesize -= skb->data_len;
 		skb->len -= skb->data_len;
@@ -2715,7 +2720,7 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 
 	*NAPI_GRO_CB(nskb) = *NAPI_GRO_CB(p);
 	skb_shinfo(nskb)->frag_list = p;
-	skb_shinfo(nskb)->gso_size = skb_shinfo(p)->gso_size;
+	skb_shinfo(nskb)->gso_size = pinfo->gso_size;
 	skb_header_release(p);
 	nskb->prev = p;
 
@@ -2730,16 +2735,13 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 	p = nskb;
 
 merge:
-	if (skb_gro_offset(skb) > skb_headlen(skb)) {
-		skb_shinfo(skb)->frags[0].page_offset +=
-			skb_gro_offset(skb) - skb_headlen(skb);
-		skb_shinfo(skb)->frags[0].size -=
-			skb_gro_offset(skb) - skb_headlen(skb);
-		skb_gro_reset_offset(skb);
-		skb_gro_pull(skb, skb_headlen(skb));
+	if (offset > headlen) {
+		skbinfo->frags[0].page_offset += offset - headlen;
+		skbinfo->frags[0].size -= offset - headlen;
+		offset = headlen;
 	}
 
-	__skb_pull(skb, skb_gro_offset(skb));
+	__skb_pull(skb, offset);
 
 	p->prev->next = skb;
 	p->prev = skb;
@@ -2786,6 +2788,7 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 	int elt = 0;
 
 	if (copy > 0) {
@@ -2819,26 +2822,22 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
 
-			WARN_ON(start > offset + len);
+		WARN_ON(start > offset + len);
 
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				elt += __skb_to_sgvec(list, sg+elt, offset - start,
-						      copy);
-				if ((len -= copy) == 0)
-					return elt;
-				offset += copy;
-			}
-			start = end;
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			elt += __skb_to_sgvec(frag_iter, sg+elt, offset - start,
+					      copy);
+			if ((len -= copy) == 0)
+				return elt;
+			offset += copy;
 		}
+		start = end;
 	}
 	BUG_ON(len);
 	return elt;
@@ -2886,7 +2885,7 @@ int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer)
 		return -ENOMEM;
 
 	/* Easy case. Most of packets will go this way. */
-	if (!skb_shinfo(skb)->frag_list) {
+	if (!skb_has_frags(skb)) {
 		/* A little of trouble, not enough of space for trailer.
 		 * This should not happen, when stack is tuned to generate
 		 * good frames. OK, on miss we reallocate and reserve even more
@@ -2921,7 +2920,7 @@ int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer)
 
 		if (skb1->next == NULL && tailbits) {
 			if (skb_shinfo(skb1)->nr_frags ||
-			    skb_shinfo(skb1)->frag_list ||
+			    skb_has_frags(skb1) ||
 			    skb_tailroom(skb1) < tailbits)
 				ntail = tailbits + 128;
 		}
@@ -2930,7 +2929,7 @@ int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer)
 		    skb_cloned(skb1) ||
 		    ntail ||
 		    skb_shinfo(skb1)->nr_frags ||
-		    skb_shinfo(skb1)->frag_list) {
+		    skb_has_frags(skb1)) {
 			struct sk_buff *skb2;
 
 			/* Fuck, we are miserable poor guys... */
@@ -3016,12 +3015,12 @@ EXPORT_SYMBOL_GPL(skb_tstamp_tx);
  */
 bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off)
 {
-	if (unlikely(start > skb->len - 2) ||
-	    unlikely((int)start + off > skb->len - 2)) {
+	if (unlikely(start > skb_headlen(skb)) ||
+	    unlikely((int)start + off > skb_headlen(skb) - 2)) {
 		if (net_ratelimit())
 			printk(KERN_WARNING
 			       "bad partial csum: csum=%u/%u len=%u\n",
-			       start, off, skb->len);
+			       start, off, skb_headlen(skb));
 		return false;
 	}
 	skb->ip_summed = CHECKSUM_PARTIAL;
diff --git a/net/core/sock.c b/net/core/sock.c
index 7dbf3ffb35c..b0ba569bc97 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -155,6 +155,7 @@ static const char *af_family_key_strings[AF_MAX+1] = {
   "sk_lock-27"       , "sk_lock-28"          , "sk_lock-AF_CAN"      ,
   "sk_lock-AF_TIPC"  , "sk_lock-AF_BLUETOOTH", "sk_lock-IUCV"        ,
   "sk_lock-AF_RXRPC" , "sk_lock-AF_ISDN"     , "sk_lock-AF_PHONET"   ,
+  "sk_lock-AF_IEEE802154",
   "sk_lock-AF_MAX"
 };
 static const char *af_family_slock_key_strings[AF_MAX+1] = {
@@ -170,6 +171,7 @@ static const char *af_family_slock_key_strings[AF_MAX+1] = {
   "slock-27"       , "slock-28"          , "slock-AF_CAN"      ,
   "slock-AF_TIPC"  , "slock-AF_BLUETOOTH", "slock-AF_IUCV"     ,
   "slock-AF_RXRPC" , "slock-AF_ISDN"     , "slock-AF_PHONET"   ,
+  "slock-AF_IEEE802154",
   "slock-AF_MAX"
 };
 static const char *af_family_clock_key_strings[AF_MAX+1] = {
@@ -185,6 +187,7 @@ static const char *af_family_clock_key_strings[AF_MAX+1] = {
   "clock-27"       , "clock-28"          , "clock-AF_CAN"      ,
   "clock-AF_TIPC"  , "clock-AF_BLUETOOTH", "clock-AF_IUCV"     ,
   "clock-AF_RXRPC" , "clock-AF_ISDN"     , "clock-AF_PHONET"   ,
+  "clock-AF_IEEE802154",
   "clock-AF_MAX"
 };
 
@@ -212,6 +215,7 @@ __u32 sysctl_rmem_default __read_mostly = SK_RMEM_MAX;
 
 /* Maximal space eaten by iovec or ancilliary data plus some space */
 int sysctl_optmem_max __read_mostly = sizeof(unsigned long)*(2*UIO_MAXIOV+512);
+EXPORT_SYMBOL(sysctl_optmem_max);
 
 static int sock_set_timeout(long *timeo_p, char __user *optval, int optlen)
 {
@@ -444,7 +448,7 @@ static inline void sock_valbool_flag(struct sock *sk, int bit, int valbool)
 int sock_setsockopt(struct socket *sock, int level, int optname,
 		    char __user *optval, int optlen)
 {
-	struct sock *sk=sock->sk;
+	struct sock *sk = sock->sk;
 	int val;
 	int valbool;
 	struct linger ling;
@@ -463,15 +467,15 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 	if (get_user(val, (int __user *)optval))
 		return -EFAULT;
 
-	valbool = val?1:0;
+	valbool = val ? 1 : 0;
 
 	lock_sock(sk);
 
-	switch(optname) {
+	switch (optname) {
 	case SO_DEBUG:
-		if (val && !capable(CAP_NET_ADMIN)) {
+		if (val && !capable(CAP_NET_ADMIN))
 			ret = -EACCES;
-		} else
+		else
 			sock_valbool_flag(sk, SOCK_DBG, valbool);
 		break;
 	case SO_REUSEADDR:
@@ -582,7 +586,7 @@ set_rcvbuf:
 			ret = -EINVAL;	/* 1003.1g */
 			break;
 		}
-		if (copy_from_user(&ling,optval,sizeof(ling))) {
+		if (copy_from_user(&ling, optval, sizeof(ling))) {
 			ret = -EFAULT;
 			break;
 		}
@@ -690,9 +694,8 @@ set_rcvbuf:
 	case SO_MARK:
 		if (!capable(CAP_NET_ADMIN))
 			ret = -EPERM;
-		else {
+		else
 			sk->sk_mark = val;
-		}
 		break;
 
 		/* We implement the SO_SNDLOWAT etc to
@@ -704,6 +707,7 @@ set_rcvbuf:
 	release_sock(sk);
 	return ret;
 }
+EXPORT_SYMBOL(sock_setsockopt);
 
 
 int sock_getsockopt(struct socket *sock, int level, int optname,
@@ -727,7 +731,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 
 	memset(&v, 0, sizeof(v));
 
-	switch(optname) {
+	switch (optname) {
 	case SO_DEBUG:
 		v.val = sock_flag(sk, SOCK_DBG);
 		break;
@@ -762,7 +766,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 
 	case SO_ERROR:
 		v.val = -sock_error(sk);
-		if (v.val==0)
+		if (v.val == 0)
 			v.val = xchg(&sk->sk_err_soft, 0);
 		break;
 
@@ -816,7 +820,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 		break;
 
 	case SO_RCVTIMEO:
-		lv=sizeof(struct timeval);
+		lv = sizeof(struct timeval);
 		if (sk->sk_rcvtimeo == MAX_SCHEDULE_TIMEOUT) {
 			v.tm.tv_sec = 0;
 			v.tm.tv_usec = 0;
@@ -827,7 +831,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 		break;
 
 	case SO_SNDTIMEO:
-		lv=sizeof(struct timeval);
+		lv = sizeof(struct timeval);
 		if (sk->sk_sndtimeo == MAX_SCHEDULE_TIMEOUT) {
 			v.tm.tv_sec = 0;
 			v.tm.tv_usec = 0;
@@ -842,7 +846,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 		break;
 
 	case SO_SNDLOWAT:
-		v.val=1;
+		v.val = 1;
 		break;
 
 	case SO_PASSCRED:
@@ -941,6 +945,8 @@ static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority,
 		sk = kmalloc(prot->obj_size, priority);
 
 	if (sk != NULL) {
+		kmemcheck_annotate_bitfield(sk, flags);
+
 		if (security_sk_alloc(sk, family, priority))
 			goto out_free;
 
@@ -1002,8 +1008,9 @@ struct sock *sk_alloc(struct net *net, int family, gfp_t priority,
 
 	return sk;
 }
+EXPORT_SYMBOL(sk_alloc);
 
-void sk_free(struct sock *sk)
+static void __sk_free(struct sock *sk)
 {
 	struct sk_filter *filter;
 
@@ -1027,6 +1034,18 @@ void sk_free(struct sock *sk)
 	sk_prot_free(sk->sk_prot_creator, sk);
 }
 
+void sk_free(struct sock *sk)
+{
+	/*
+	 * We substract one from sk_wmem_alloc and can know if
+	 * some packets are still in some tx queue.
+	 * If not null, sock_wfree() will call __sk_free(sk) later
+	 */
+	if (atomic_dec_and_test(&sk->sk_wmem_alloc))
+		__sk_free(sk);
+}
+EXPORT_SYMBOL(sk_free);
+
 /*
  * Last sock_put should drop referrence to sk->sk_net. It has already
  * been dropped in sk_change_net. Taking referrence to stopping namespace
@@ -1065,7 +1084,10 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
 		newsk->sk_backlog.head	= newsk->sk_backlog.tail = NULL;
 
 		atomic_set(&newsk->sk_rmem_alloc, 0);
-		atomic_set(&newsk->sk_wmem_alloc, 0);
+		/*
+		 * sk_wmem_alloc set to one (see sk_free() and sock_wfree())
+		 */
+		atomic_set(&newsk->sk_wmem_alloc, 1);
 		atomic_set(&newsk->sk_omem_alloc, 0);
 		skb_queue_head_init(&newsk->sk_receive_queue);
 		skb_queue_head_init(&newsk->sk_write_queue);
@@ -1126,7 +1148,6 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
 out:
 	return newsk;
 }
-
 EXPORT_SYMBOL_GPL(sk_clone);
 
 void sk_setup_caps(struct sock *sk, struct dst_entry *dst)
@@ -1170,13 +1191,20 @@ void __init sk_init(void)
 void sock_wfree(struct sk_buff *skb)
 {
 	struct sock *sk = skb->sk;
+	int res;
 
 	/* In case it might be waiting for more memory. */
-	atomic_sub(skb->truesize, &sk->sk_wmem_alloc);
+	res = atomic_sub_return(skb->truesize, &sk->sk_wmem_alloc);
 	if (!sock_flag(sk, SOCK_USE_WRITE_QUEUE))
 		sk->sk_write_space(sk);
-	sock_put(sk);
+	/*
+	 * if sk_wmem_alloc reached 0, we are last user and should
+	 * free this sock, as sk_free() call could not do it.
+	 */
+	if (res == 0)
+		__sk_free(sk);
 }
+EXPORT_SYMBOL(sock_wfree);
 
 /*
  * Read buffer destructor automatically called from kfree_skb.
@@ -1188,6 +1216,7 @@ void sock_rfree(struct sk_buff *skb)
 	atomic_sub(skb->truesize, &sk->sk_rmem_alloc);
 	sk_mem_uncharge(skb->sk, skb->truesize);
 }
+EXPORT_SYMBOL(sock_rfree);
 
 
 int sock_i_uid(struct sock *sk)
@@ -1199,6 +1228,7 @@ int sock_i_uid(struct sock *sk)
 	read_unlock(&sk->sk_callback_lock);
 	return uid;
 }
+EXPORT_SYMBOL(sock_i_uid);
 
 unsigned long sock_i_ino(struct sock *sk)
 {
@@ -1209,6 +1239,7 @@ unsigned long sock_i_ino(struct sock *sk)
 	read_unlock(&sk->sk_callback_lock);
 	return ino;
 }
+EXPORT_SYMBOL(sock_i_ino);
 
 /*
  * Allocate a skb from the socket's send buffer.
@@ -1217,7 +1248,7 @@ struct sk_buff *sock_wmalloc(struct sock *sk, unsigned long size, int force,
 			     gfp_t priority)
 {
 	if (force || atomic_read(&sk->sk_wmem_alloc) < sk->sk_sndbuf) {
-		struct sk_buff * skb = alloc_skb(size, priority);
+		struct sk_buff *skb = alloc_skb(size, priority);
 		if (skb) {
 			skb_set_owner_w(skb, sk);
 			return skb;
@@ -1225,6 +1256,7 @@ struct sk_buff *sock_wmalloc(struct sock *sk, unsigned long size, int force,
 	}
 	return NULL;
 }
+EXPORT_SYMBOL(sock_wmalloc);
 
 /*
  * Allocate a skb from the socket's receive buffer.
@@ -1261,6 +1293,7 @@ void *sock_kmalloc(struct sock *sk, int size, gfp_t priority)
 	}
 	return NULL;
 }
+EXPORT_SYMBOL(sock_kmalloc);
 
 /*
  * Free an option memory block.
@@ -1270,11 +1303,12 @@ void sock_kfree_s(struct sock *sk, void *mem, int size)
 	kfree(mem);
 	atomic_sub(size, &sk->sk_omem_alloc);
 }
+EXPORT_SYMBOL(sock_kfree_s);
 
 /* It is almost wait_for_tcp_memory minus release_sock/lock_sock.
    I think, these locks should be removed for datagram sockets.
  */
-static long sock_wait_for_wmem(struct sock * sk, long timeo)
+static long sock_wait_for_wmem(struct sock *sk, long timeo)
 {
 	DEFINE_WAIT(wait);
 
@@ -1392,6 +1426,7 @@ struct sk_buff *sock_alloc_send_skb(struct sock *sk, unsigned long size,
 {
 	return sock_alloc_send_pskb(sk, size, 0, noblock, errcode);
 }
+EXPORT_SYMBOL(sock_alloc_send_skb);
 
 static void __lock_sock(struct sock *sk)
 {
@@ -1460,7 +1495,6 @@ int sk_wait_data(struct sock *sk, long *timeo)
 	finish_wait(sk->sk_sleep, &wait);
 	return rc;
 }
-
 EXPORT_SYMBOL(sk_wait_data);
 
 /**
@@ -1541,7 +1575,6 @@ suppress_allocation:
 	atomic_sub(amt, prot->memory_allocated);
 	return 0;
 }
-
 EXPORT_SYMBOL(__sk_mem_schedule);
 
 /**
@@ -1560,7 +1593,6 @@ void __sk_mem_reclaim(struct sock *sk)
 	    (atomic_read(prot->memory_allocated) < prot->sysctl_mem[0]))
 		*prot->memory_pressure = 0;
 }
-
 EXPORT_SYMBOL(__sk_mem_reclaim);
 
 
@@ -1575,78 +1607,92 @@ int sock_no_bind(struct socket *sock, struct sockaddr *saddr, int len)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_bind);
 
 int sock_no_connect(struct socket *sock, struct sockaddr *saddr,
 		    int len, int flags)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_connect);
 
 int sock_no_socketpair(struct socket *sock1, struct socket *sock2)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_socketpair);
 
 int sock_no_accept(struct socket *sock, struct socket *newsock, int flags)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_accept);
 
 int sock_no_getname(struct socket *sock, struct sockaddr *saddr,
 		    int *len, int peer)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_getname);
 
-unsigned int sock_no_poll(struct file * file, struct socket *sock, poll_table *pt)
+unsigned int sock_no_poll(struct file *file, struct socket *sock, poll_table *pt)
 {
 	return 0;
 }
+EXPORT_SYMBOL(sock_no_poll);
 
 int sock_no_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_ioctl);
 
 int sock_no_listen(struct socket *sock, int backlog)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_listen);
 
 int sock_no_shutdown(struct socket *sock, int how)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_shutdown);
 
 int sock_no_setsockopt(struct socket *sock, int level, int optname,
 		    char __user *optval, int optlen)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_setsockopt);
 
 int sock_no_getsockopt(struct socket *sock, int level, int optname,
 		    char __user *optval, int __user *optlen)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_getsockopt);
 
 int sock_no_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *m,
 		    size_t len)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_sendmsg);
 
 int sock_no_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *m,
 		    size_t len, int flags)
 {
 	return -EOPNOTSUPP;
 }
+EXPORT_SYMBOL(sock_no_recvmsg);
 
 int sock_no_mmap(struct file *file, struct socket *sock, struct vm_area_struct *vma)
 {
 	/* Mirror missing mmap method error code */
 	return -ENODEV;
 }
+EXPORT_SYMBOL(sock_no_mmap);
 
 ssize_t sock_no_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags)
 {
@@ -1660,6 +1706,7 @@ ssize_t sock_no_sendpage(struct socket *sock, struct page *page, int offset, siz
 	kunmap(page);
 	return res;
 }
+EXPORT_SYMBOL(sock_no_sendpage);
 
 /*
  *	Default Socket Callbacks
@@ -1723,6 +1770,7 @@ void sk_send_sigurg(struct sock *sk)
 		if (send_sigurg(&sk->sk_socket->file->f_owner))
 			sk_wake_async(sk, SOCK_WAKE_URG, POLL_PRI);
 }
+EXPORT_SYMBOL(sk_send_sigurg);
 
 void sk_reset_timer(struct sock *sk, struct timer_list* timer,
 		    unsigned long expires)
@@ -1730,7 +1778,6 @@ void sk_reset_timer(struct sock *sk, struct timer_list* timer,
 	if (!mod_timer(timer, expires))
 		sock_hold(sk);
 }
-
 EXPORT_SYMBOL(sk_reset_timer);
 
 void sk_stop_timer(struct sock *sk, struct timer_list* timer)
@@ -1738,7 +1785,6 @@ void sk_stop_timer(struct sock *sk, struct timer_list* timer)
 	if (timer_pending(timer) && del_timer(timer))
 		__sock_put(sk);
 }
-
 EXPORT_SYMBOL(sk_stop_timer);
 
 void sock_init_data(struct socket *sock, struct sock *sk)
@@ -1795,8 +1841,10 @@ void sock_init_data(struct socket *sock, struct sock *sk)
 	sk->sk_stamp = ktime_set(-1L, 0);
 
 	atomic_set(&sk->sk_refcnt, 1);
+	atomic_set(&sk->sk_wmem_alloc, 1);
 	atomic_set(&sk->sk_drops, 0);
 }
+EXPORT_SYMBOL(sock_init_data);
 
 void lock_sock_nested(struct sock *sk, int subclass)
 {
@@ -1812,7 +1860,6 @@ void lock_sock_nested(struct sock *sk, int subclass)
 	mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
 	local_bh_enable();
 }
-
 EXPORT_SYMBOL(lock_sock_nested);
 
 void release_sock(struct sock *sk)
@@ -1895,7 +1942,6 @@ int sock_common_getsockopt(struct socket *sock, int level, int optname,
 
 	return sk->sk_prot->getsockopt(sk, level, optname, optval, optlen);
 }
-
 EXPORT_SYMBOL(sock_common_getsockopt);
 
 #ifdef CONFIG_COMPAT
@@ -1925,7 +1971,6 @@ int sock_common_recvmsg(struct kiocb *iocb, struct socket *sock,
 		msg->msg_namelen = addr_len;
 	return err;
 }
-
 EXPORT_SYMBOL(sock_common_recvmsg);
 
 /*
@@ -1938,7 +1983,6 @@ int sock_common_setsockopt(struct socket *sock, int level, int optname,
 
 	return sk->sk_prot->setsockopt(sk, level, optname, optval, optlen);
 }
-
 EXPORT_SYMBOL(sock_common_setsockopt);
 
 #ifdef CONFIG_COMPAT
@@ -1989,7 +2033,6 @@ void sk_common_release(struct sock *sk)
 	sk_refcnt_debug_release(sk);
 	sock_put(sk);
 }
-
 EXPORT_SYMBOL(sk_common_release);
 
 static DEFINE_RWLOCK(proto_list_lock);
@@ -2171,7 +2214,6 @@ out_free_sock_slab:
 out:
 	return -ENOBUFS;
 }
-
 EXPORT_SYMBOL(proto_register);
 
 void proto_unregister(struct proto *prot)
@@ -2198,7 +2240,6 @@ void proto_unregister(struct proto *prot)
 		prot->twsk_prot->twsk_slab = NULL;
 	}
 }
-
 EXPORT_SYMBOL(proto_unregister);
 
 #ifdef CONFIG_PROC_FS
@@ -2324,33 +2365,3 @@ static int __init proto_init(void)
 subsys_initcall(proto_init);
 
 #endif /* PROC_FS */
-
-EXPORT_SYMBOL(sk_alloc);
-EXPORT_SYMBOL(sk_free);
-EXPORT_SYMBOL(sk_send_sigurg);
-EXPORT_SYMBOL(sock_alloc_send_skb);
-EXPORT_SYMBOL(sock_init_data);
-EXPORT_SYMBOL(sock_kfree_s);
-EXPORT_SYMBOL(sock_kmalloc);
-EXPORT_SYMBOL(sock_no_accept);
-EXPORT_SYMBOL(sock_no_bind);
-EXPORT_SYMBOL(sock_no_connect);
-EXPORT_SYMBOL(sock_no_getname);
-EXPORT_SYMBOL(sock_no_getsockopt);
-EXPORT_SYMBOL(sock_no_ioctl);
-EXPORT_SYMBOL(sock_no_listen);
-EXPORT_SYMBOL(sock_no_mmap);
-EXPORT_SYMBOL(sock_no_poll);
-EXPORT_SYMBOL(sock_no_recvmsg);
-EXPORT_SYMBOL(sock_no_sendmsg);
-EXPORT_SYMBOL(sock_no_sendpage);
-EXPORT_SYMBOL(sock_no_setsockopt);
-EXPORT_SYMBOL(sock_no_shutdown);
-EXPORT_SYMBOL(sock_no_socketpair);
-EXPORT_SYMBOL(sock_rfree);
-EXPORT_SYMBOL(sock_setsockopt);
-EXPORT_SYMBOL(sock_wfree);
-EXPORT_SYMBOL(sock_wmalloc);
-EXPORT_SYMBOL(sock_i_uid);
-EXPORT_SYMBOL(sock_i_ino);
-EXPORT_SYMBOL(sysctl_optmem_max);
diff --git a/net/core/stream.c b/net/core/stream.c
index 8727cead64a..a37debfeb1b 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -33,7 +33,8 @@ void sk_stream_write_space(struct sock *sk)
 		clear_bit(SOCK_NOSPACE, &sock->flags);
 
 		if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
-			wake_up_interruptible(sk->sk_sleep);
+			wake_up_interruptible_poll(sk->sk_sleep, POLLOUT |
+						POLLWRNORM | POLLWRBAND);
 		if (sock->fasync_list && !(sk->sk_shutdown & SEND_SHUTDOWN))
 			sock_wake_async(sock, SOCK_WAKE_SPACE, POLL_OUT);
 	}
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index 164b090d5ac..25d717ebc92 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -51,6 +51,7 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
+	struct sk_buff *frag_iter;
 	dma_cookie_t cookie = 0;
 
 	/* Copy header. */
@@ -94,31 +95,28 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			copy = end - offset;
-			if (copy > 0) {
-				if (copy > len)
-					copy = len;
-				cookie = dma_skb_copy_datagram_iovec(chan, list,
-						offset - start, to, copy,
-						pinned_list);
-				if (cookie < 0)
-					goto fault;
-				len -= copy;
-				if (len == 0)
-					goto end;
-				offset += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		copy = end - offset;
+		if (copy > 0) {
+			if (copy > len)
+				copy = len;
+			cookie = dma_skb_copy_datagram_iovec(chan, frag_iter,
+							     offset - start,
+							     to, copy,
+							     pinned_list);
+			if (cookie < 0)
+				goto fault;
+			len -= copy;
+			if (len == 0)
+				goto end;
+			offset += copy;
 		}
+		start = end;
 	}
 
 end:
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index d1dd95289b8..a0a36c9e6cc 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -452,7 +452,7 @@ static struct dst_entry* dccp_v4_route_skb(struct net *net, struct sock *sk,
 					   struct sk_buff *skb)
 {
 	struct rtable *rt;
-	struct flowi fl = { .oif = skb->rtable->rt_iif,
+	struct flowi fl = { .oif = skb_rtable(skb)->rt_iif,
 			    .nl_u = { .ip4_u =
 				      { .daddr = ip_hdr(skb)->saddr,
 					.saddr = ip_hdr(skb)->daddr,
@@ -507,14 +507,14 @@ static void dccp_v4_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 	const struct iphdr *rxiph;
 	struct sk_buff *skb;
 	struct dst_entry *dst;
-	struct net *net = dev_net(rxskb->dst->dev);
+	struct net *net = dev_net(skb_dst(rxskb)->dev);
 	struct sock *ctl_sk = net->dccp.v4_ctl_sk;
 
 	/* Never send a reset in response to a reset. */
 	if (dccp_hdr(rxskb)->dccph_type == DCCP_PKT_RESET)
 		return;
 
-	if (rxskb->rtable->rt_type != RTN_LOCAL)
+	if (skb_rtable(rxskb)->rt_type != RTN_LOCAL)
 		return;
 
 	dst = dccp_v4_route_skb(net, ctl_sk, rxskb);
@@ -528,7 +528,7 @@ static void dccp_v4_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 	rxiph = ip_hdr(rxskb);
 	dccp_hdr(skb)->dccph_checksum = dccp_v4_csum_finish(skb, rxiph->saddr,
 								 rxiph->daddr);
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 
 	bh_lock_sock(ctl_sk);
 	err = ip_build_and_send_pkt(skb, ctl_sk,
@@ -567,7 +567,7 @@ int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 	struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
 
 	/* Never answer to DCCP_PKT_REQUESTs send to broadcast or multicast */
-	if (skb->rtable->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
+	if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
 		return 0;	/* discard, don't send a reset here */
 
 	if (dccp_bad_service_code(sk, service)) {
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index b963f35c65f..05ea7440d9e 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -314,8 +314,9 @@ static void dccp_v6_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 	struct ipv6hdr *rxip6h;
 	struct sk_buff *skb;
 	struct flowi fl;
-	struct net *net = dev_net(rxskb->dst->dev);
+	struct net *net = dev_net(skb_dst(rxskb)->dev);
 	struct sock *ctl_sk = net->dccp.v6_ctl_sk;
+	struct dst_entry *dst;
 
 	if (dccp_hdr(rxskb)->dccph_type == DCCP_PKT_RESET)
 		return;
@@ -342,8 +343,9 @@ static void dccp_v6_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 	security_skb_classify_flow(rxskb, &fl);
 
 	/* sk = NULL, but it is safe for now. RST socket required. */
-	if (!ip6_dst_lookup(ctl_sk, &skb->dst, &fl)) {
-		if (xfrm_lookup(net, &skb->dst, &fl, NULL, 0) >= 0) {
+	if (!ip6_dst_lookup(ctl_sk, &dst, &fl)) {
+		if (xfrm_lookup(net, &dst, &fl, NULL, 0) >= 0) {
+			skb_dst_set(skb, dst);
 			ip6_xmit(ctl_sk, skb, &fl, NULL, 0);
 			DCCP_INC_STATS_BH(DCCP_MIB_OUTSEGS);
 			DCCP_INC_STATS_BH(DCCP_MIB_OUTRSTS);
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 36bcc00654d..c0e88c16d08 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -350,7 +350,7 @@ struct sk_buff *dccp_make_response(struct sock *sk, struct dst_entry *dst,
 	/* Reserve space for headers. */
 	skb_reserve(skb, sk->sk_prot->max_header);
 
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 
 	dreq = dccp_rsk(req);
 	if (inet_rsk(req)->acked)	/* increase ISS upon retransmission */
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 9647d911f91..a5e3a593e47 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -1075,6 +1075,7 @@ static int dn_accept(struct socket *sock, struct socket *newsock, int flags)
 	int err = 0;
 	unsigned char type;
 	long timeo = sock_rcvtimeo(sk, flags & O_NONBLOCK);
+	struct dst_entry *dst;
 
 	lock_sock(sk);
 
@@ -1102,8 +1103,9 @@ static int dn_accept(struct socket *sock, struct socket *newsock, int flags)
 	}
 	release_sock(sk);
 
-	dst_release(xchg(&newsk->sk_dst_cache, skb->dst));
-	skb->dst = NULL;
+	dst = skb_dst(skb);
+	dst_release(xchg(&newsk->sk_dst_cache, dst));
+	skb_dst_set(skb, NULL);
 
 	DN_SK(newsk)->state        = DN_CR;
 	DN_SK(newsk)->addrrem      = cb->src_port;
@@ -1250,14 +1252,8 @@ static int dn_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		if (skb) {
 			amount = skb->len;
 		} else {
-			skb = sk->sk_receive_queue.next;
-			for (;;) {
-				if (skb ==
-				    (struct sk_buff *)&sk->sk_receive_queue)
-					break;
+			skb_queue_walk(&sk->sk_receive_queue, skb)
 				amount += skb->len;
-				skb = skb->next;
-			}
 		}
 		release_sock(sk);
 		err = put_user(amount, (int __user *)arg);
@@ -1644,13 +1640,13 @@ static int __dn_getsockopt(struct socket *sock, int level,int optname, char __us
 
 static int dn_data_ready(struct sock *sk, struct sk_buff_head *q, int flags, int target)
 {
-	struct sk_buff *skb = q->next;
+	struct sk_buff *skb;
 	int len = 0;
 
 	if (flags & MSG_OOB)
 		return !skb_queue_empty(q) ? 1 : 0;
 
-	while(skb != (struct sk_buff *)q) {
+	skb_queue_walk(q, skb) {
 		struct dn_skb_cb *cb = DN_SKB_CB(skb);
 		len += skb->len;
 
@@ -1666,8 +1662,6 @@ static int dn_data_ready(struct sock *sk, struct sk_buff_head *q, int flags, int
 		/* minimum data length for read exceeded */
 		if (len >= target)
 			return 1;
-
-		skb = skb->next;
 	}
 
 	return 0;
@@ -1683,7 +1677,7 @@ static int dn_recvmsg(struct kiocb *iocb, struct socket *sock,
 	size_t target = size > 1 ? 1 : 0;
 	size_t copied = 0;
 	int rv = 0;
-	struct sk_buff *skb, *nskb;
+	struct sk_buff *skb, *n;
 	struct dn_skb_cb *cb = NULL;
 	unsigned char eor = 0;
 	long timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
@@ -1758,7 +1752,7 @@ static int dn_recvmsg(struct kiocb *iocb, struct socket *sock,
 		finish_wait(sk->sk_sleep, &wait);
 	}
 
-	for(skb = queue->next; skb != (struct sk_buff *)queue; skb = nskb) {
+	skb_queue_walk_safe(queue, skb, n) {
 		unsigned int chunk = skb->len;
 		cb = DN_SKB_CB(skb);
 
@@ -1775,7 +1769,6 @@ static int dn_recvmsg(struct kiocb *iocb, struct socket *sock,
 			skb_pull(skb, chunk);
 
 		eor = cb->nsp_flags & 0x40;
-		nskb = skb->next;
 
 		if (skb->len == 0) {
 			skb_unlink(skb, queue);
diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c
index 05b5aa05e50..923786bd6d0 100644
--- a/net/decnet/dn_neigh.c
+++ b/net/decnet/dn_neigh.c
@@ -204,7 +204,7 @@ static void dn_short_error_report(struct neighbour *neigh, struct sk_buff *skb)
 
 static int dn_neigh_output_packet(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct dn_route *rt = (struct dn_route *)dst;
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
@@ -224,7 +224,7 @@ static int dn_neigh_output_packet(struct sk_buff *skb)
 
 static int dn_long_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
 	int headroom = dev->hard_header_len + sizeof(struct dn_long_packet) + 3;
@@ -270,7 +270,7 @@ static int dn_long_output(struct sk_buff *skb)
 
 static int dn_short_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
 	int headroom = dev->hard_header_len + sizeof(struct dn_short_packet) + 2;
@@ -313,7 +313,7 @@ static int dn_short_output(struct sk_buff *skb)
  */
 static int dn_phase3_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct neighbour *neigh = dst->neighbour;
 	struct net_device *dev = neigh->dev;
 	int headroom = dev->hard_header_len + sizeof(struct dn_short_packet) + 2;
diff --git a/net/decnet/dn_nsp_in.c b/net/decnet/dn_nsp_in.c
index 5d8a2a56fd3..932408dca86 100644
--- a/net/decnet/dn_nsp_in.c
+++ b/net/decnet/dn_nsp_in.c
@@ -578,6 +578,7 @@ out:
 static __inline__ int dn_queue_skb(struct sock *sk, struct sk_buff *skb, int sig, struct sk_buff_head *queue)
 {
 	int err;
+	int skb_len;
 
 	/* Cast skb->rcvbuf to unsigned... It's pointless, but reduces
 	   number of warnings when compiling with -W --ANK
@@ -592,22 +593,12 @@ static __inline__ int dn_queue_skb(struct sock *sk, struct sk_buff *skb, int sig
 	if (err)
 		goto out;
 
+	skb_len = skb->len;
 	skb_set_owner_r(skb, sk);
 	skb_queue_tail(queue, skb);
 
-	/* This code only runs from BH or BH protected context.
-	 * Therefore the plain read_lock is ok here. -DaveM
-	 */
-	read_lock(&sk->sk_callback_lock);
-	if (!sock_flag(sk, SOCK_DEAD)) {
-		struct socket *sock = sk->sk_socket;
-		wake_up_interruptible(sk->sk_sleep);
-		if (sock && sock->fasync_list &&
-		    !test_bit(SOCK_ASYNC_WAITDATA, &sock->flags))
-			__kill_fasync(sock->fasync_list, sig,
-				    (sig == SIGURG) ? POLL_PRI : POLL_IN);
-	}
-	read_unlock(&sk->sk_callback_lock);
+	if (!sock_flag(sk, SOCK_DEAD))
+		sk->sk_data_ready(sk, skb_len);
 out:
 	return err;
 }
diff --git a/net/decnet/dn_nsp_out.c b/net/decnet/dn_nsp_out.c
index 2013c25b7f5..a65e929ce76 100644
--- a/net/decnet/dn_nsp_out.c
+++ b/net/decnet/dn_nsp_out.c
@@ -85,7 +85,7 @@ static void dn_nsp_send(struct sk_buff *skb)
 	dst = sk_dst_check(sk, 0);
 	if (dst) {
 try_again:
-		skb->dst = dst;
+		skb_dst_set(skb, dst);
 		dst_output(skb);
 		return;
 	}
@@ -382,7 +382,7 @@ int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff
 {
 	struct dn_skb_cb *cb = DN_SKB_CB(skb);
 	struct dn_scp *scp = DN_SK(sk);
-	struct sk_buff *skb2, *list, *ack = NULL;
+	struct sk_buff *skb2, *n, *ack = NULL;
 	int wakeup = 0;
 	int try_retrans = 0;
 	unsigned long reftime = cb->stamp;
@@ -390,9 +390,7 @@ int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff
 	unsigned short xmit_count;
 	unsigned short segnum;
 
-	skb2 = q->next;
-	list = (struct sk_buff *)q;
-	while(list != skb2) {
+	skb_queue_walk_safe(q, skb2, n) {
 		struct dn_skb_cb *cb2 = DN_SKB_CB(skb2);
 
 		if (dn_before_or_equal(cb2->segnum, acknum))
@@ -400,8 +398,6 @@ int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff
 
 		/* printk(KERN_DEBUG "ack: %s %04x %04x\n", ack ? "ACK" : "SKIP", (int)cb2->segnum, (int)acknum); */
 
-		skb2 = skb2->next;
-
 		if (ack == NULL)
 			continue;
 
@@ -586,7 +582,7 @@ static __inline__ void dn_nsp_do_disc(struct sock *sk, unsigned char msgflg,
 	 * to be able to send disc packets out which have no socket
 	 * associations.
 	 */
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 	dst_output(skb);
 }
 
@@ -615,7 +611,7 @@ void dn_nsp_return_disc(struct sk_buff *skb, unsigned char msgflg,
 	int ddl = 0;
 	gfp_t gfp = GFP_ATOMIC;
 
-	dn_nsp_do_disc(NULL, msgflg, reason, gfp, skb->dst, ddl,
+	dn_nsp_do_disc(NULL, msgflg, reason, gfp, skb_dst(skb), ddl,
 			NULL, cb->src_port, cb->dst_port);
 }
 
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 0cc4394117d..1d6ca8a98dc 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -678,7 +678,7 @@ out:
 
 static int dn_output(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct dn_route *rt = (struct dn_route *)dst;
 	struct net_device *dev = dst->dev;
 	struct dn_skb_cb *cb = DN_SKB_CB(skb);
@@ -717,7 +717,7 @@ error:
 static int dn_forward(struct sk_buff *skb)
 {
 	struct dn_skb_cb *cb = DN_SKB_CB(skb);
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct dn_dev *dn_db = dst->dev->dn_ptr;
 	struct dn_route *rt;
 	struct neighbour *neigh = dst->neighbour;
@@ -730,7 +730,7 @@ static int dn_forward(struct sk_buff *skb)
 		goto drop;
 
 	/* Ensure that we have enough space for headers */
-	rt = (struct dn_route *)skb->dst;
+	rt = (struct dn_route *)skb_dst(skb);
 	header_len = dn_db->use_long ? 21 : 6;
 	if (skb_cow(skb, LL_RESERVED_SPACE(rt->u.dst.dev)+header_len))
 		goto drop;
@@ -1392,7 +1392,8 @@ make_route:
 		goto e_neighbour;
 
 	hash = dn_hash(rt->fl.fld_src, rt->fl.fld_dst);
-	dn_insert_route(rt, hash, (struct dn_route **)&skb->dst);
+	dn_insert_route(rt, hash, &rt);
+	skb_dst_set(skb, &rt->u.dst);
 
 done:
 	if (neigh)
@@ -1424,7 +1425,7 @@ static int dn_route_input(struct sk_buff *skb)
 	struct dn_skb_cb *cb = DN_SKB_CB(skb);
 	unsigned hash = dn_hash(cb->src, cb->dst);
 
-	if (skb->dst)
+	if (skb_dst(skb))
 		return 0;
 
 	rcu_read_lock();
@@ -1437,7 +1438,7 @@ static int dn_route_input(struct sk_buff *skb)
 		    (rt->fl.iif == cb->iif)) {
 			dst_use(&rt->u.dst, jiffies);
 			rcu_read_unlock();
-			skb->dst = (struct dst_entry *)rt;
+			skb_dst_set(skb, (struct dst_entry *)rt);
 			return 0;
 		}
 	}
@@ -1449,7 +1450,7 @@ static int dn_route_input(struct sk_buff *skb)
 static int dn_rt_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 			   int event, int nowait, unsigned int flags)
 {
-	struct dn_route *rt = (struct dn_route *)skb->dst;
+	struct dn_route *rt = (struct dn_route *)skb_dst(skb);
 	struct rtmsg *r;
 	struct nlmsghdr *nlh;
 	unsigned char *b = skb_tail_pointer(skb);
@@ -1554,7 +1555,7 @@ static int dn_cache_getroute(struct sk_buff *in_skb, struct nlmsghdr *nlh, void
 		err = dn_route_input(skb);
 		local_bh_enable();
 		memset(cb, 0, sizeof(struct dn_skb_cb));
-		rt = (struct dn_route *)skb->dst;
+		rt = (struct dn_route *)skb_dst(skb);
 		if (!err && -rt->u.dst.error)
 			err = rt->u.dst.error;
 	} else {
@@ -1570,7 +1571,7 @@ static int dn_cache_getroute(struct sk_buff *in_skb, struct nlmsghdr *nlh, void
 	skb->dev = NULL;
 	if (err)
 		goto out_free;
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 	if (rtm->rtm_flags & RTM_F_NOTIFY)
 		rt->rt_flags |= RTCF_NOTIFY;
 
@@ -1622,15 +1623,15 @@ int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb)
 			rt = rcu_dereference(rt->u.dst.dn_next), idx++) {
 			if (idx < s_idx)
 				continue;
-			skb->dst = dst_clone(&rt->u.dst);
+			skb_dst_set(skb, dst_clone(&rt->u.dst));
 			if (dn_rt_fill_info(skb, NETLINK_CB(cb->skb).pid,
 					cb->nlh->nlmsg_seq, RTM_NEWROUTE,
 					1, NLM_F_MULTI) <= 0) {
-				dst_release(xchg(&skb->dst, NULL));
+				skb_dst_drop(skb);
 				rcu_read_unlock_bh();
 				goto done;
 			}
-			dst_release(xchg(&skb->dst, NULL));
+			skb_dst_drop(skb);
 		}
 		rcu_read_unlock_bh();
 	}
diff --git a/net/decnet/dn_rules.c b/net/decnet/dn_rules.c
index 14fbca55e90..72495f25269 100644
--- a/net/decnet/dn_rules.c
+++ b/net/decnet/dn_rules.c
@@ -115,7 +115,7 @@ static int dn_fib_rule_match(struct fib_rule *rule, struct flowi *fl, int flags)
 }
 
 static int dn_fib_rule_configure(struct fib_rule *rule, struct sk_buff *skb,
-				 struct nlmsghdr *nlh, struct fib_rule_hdr *frh,
+				 struct fib_rule_hdr *frh,
 				 struct nlattr **tb)
 {
 	int err = -EINVAL;
@@ -192,7 +192,7 @@ unsigned dnet_addr_type(__le16 addr)
 }
 
 static int dn_fib_rule_fill(struct fib_rule *rule, struct sk_buff *skb,
-			    struct nlmsghdr *nlh, struct fib_rule_hdr *frh)
+			    struct fib_rule_hdr *frh)
 {
 	struct dn_fib_rule *r = (struct dn_fib_rule *)rule;
 
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index ed131181215..2175e6d5cc8 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -67,7 +67,7 @@ static int dsa_slave_open(struct net_device *dev)
 		return -ENETDOWN;
 
 	if (compare_ether_addr(dev->dev_addr, master->dev_addr)) {
-		err = dev_unicast_add(master, dev->dev_addr, ETH_ALEN);
+		err = dev_unicast_add(master, dev->dev_addr);
 		if (err < 0)
 			goto out;
 	}
@@ -90,7 +90,7 @@ clear_allmulti:
 		dev_set_allmulti(master, -1);
 del_unicast:
 	if (compare_ether_addr(dev->dev_addr, master->dev_addr))
-		dev_unicast_delete(master, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(master, dev->dev_addr);
 out:
 	return err;
 }
@@ -108,7 +108,7 @@ static int dsa_slave_close(struct net_device *dev)
 		dev_set_promiscuity(master, -1);
 
 	if (compare_ether_addr(dev->dev_addr, master->dev_addr))
-		dev_unicast_delete(master, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(master, dev->dev_addr);
 
 	return 0;
 }
@@ -147,13 +147,13 @@ static int dsa_slave_set_mac_address(struct net_device *dev, void *a)
 		goto out;
 
 	if (compare_ether_addr(addr->sa_data, master->dev_addr)) {
-		err = dev_unicast_add(master, addr->sa_data, ETH_ALEN);
+		err = dev_unicast_add(master, addr->sa_data);
 		if (err < 0)
 			return err;
 	}
 
 	if (compare_ether_addr(dev->dev_addr, master->dev_addr))
-		dev_unicast_delete(master, dev->dev_addr, ETH_ALEN);
+		dev_unicast_delete(master, dev->dev_addr);
 
 out:
 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 6f479fa522c..8121bf0029e 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -901,15 +901,10 @@ static void aun_tx_ack(unsigned long seq, int result)
 	struct ec_cb *eb;
 
 	spin_lock_irqsave(&aun_queue_lock, flags);
-	skb = skb_peek(&aun_queue);
-	while (skb && skb != (struct sk_buff *)&aun_queue)
-	{
-		struct sk_buff *newskb = skb->next;
+	skb_queue_walk(&aun_queue, skb) {
 		eb = (struct ec_cb *)&skb->cb;
 		if (eb->seq == seq)
 			goto foundit;
-
-		skb = newskb;
 	}
 	spin_unlock_irqrestore(&aun_queue_lock, flags);
 	printk(KERN_DEBUG "AUN: unknown sequence %ld\n", seq);
@@ -982,23 +977,18 @@ static void aun_data_available(struct sock *sk, int slen)
 
 static void ab_cleanup(unsigned long h)
 {
-	struct sk_buff *skb;
+	struct sk_buff *skb, *n;
 	unsigned long flags;
 
 	spin_lock_irqsave(&aun_queue_lock, flags);
-	skb = skb_peek(&aun_queue);
-	while (skb && skb != (struct sk_buff *)&aun_queue)
-	{
-		struct sk_buff *newskb = skb->next;
+	skb_queue_walk_safe(&aun_queue, skb, n) {
 		struct ec_cb *eb = (struct ec_cb *)&skb->cb;
-		if ((jiffies - eb->start) > eb->timeout)
-		{
+		if ((jiffies - eb->start) > eb->timeout) {
 			tx_result(skb->sk, eb->cookie,
 				  ECTYPE_TRANSMIT_NOT_PRESENT);
 			skb_unlink(skb, &aun_queue);
 			kfree_skb(skb);
 		}
-		skb = newskb;
 	}
 	spin_unlock_irqrestore(&aun_queue_lock, flags);
 
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 280352aba40..5a883affecd 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -337,11 +337,6 @@ const struct header_ops eth_header_ops ____cacheline_aligned = {
 void ether_setup(struct net_device *dev)
 {
 	dev->header_ops		= &eth_header_ops;
-#ifdef CONFIG_COMPAT_NET_DEV_OPS
-	dev->change_mtu		= eth_change_mtu;
-	dev->set_mac_address 	= eth_mac_addr;
-	dev->validate_addr	= eth_validate_addr;
-#endif
 	dev->type		= ARPHRD_ETHER;
 	dev->hard_header_len 	= ETH_HLEN;
 	dev->mtu		= ETH_DATA_LEN;
diff --git a/net/ieee802154/Kconfig b/net/ieee802154/Kconfig
new file mode 100644
index 00000000000..1c1de97d264
--- /dev/null
+++ b/net/ieee802154/Kconfig
@@ -0,0 +1,12 @@
+config IEEE802154
+	tristate "IEEE Std 802.15.4 Low-Rate Wireless Personal Area Networks support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  IEEE Std 802.15.4 defines a low data rate, low power and low
+	  complexity short range wireless personal area networks. It was
+	  designed to organise networks of sensors, switches, etc automation
+	  devices. Maximum allowed data rate is 250 kb/s and typical personal
+	  operating space around 10m.
+
+	  Say Y here to compile LR-WPAN support into the kernel or say M to
+	  compile it as modules.
diff --git a/net/ieee802154/Makefile b/net/ieee802154/Makefile
new file mode 100644
index 00000000000..f99338a2610
--- /dev/null
+++ b/net/ieee802154/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_IEEE802154) +=	nl802154.o af_802154.o
+nl802154-y		:= netlink.o nl_policy.o
+af_802154-y		:= af_ieee802154.o raw.o dgram.o
+
+ccflags-y += -Wall -DDEBUG
diff --git a/net/ieee802154/af802154.h b/net/ieee802154/af802154.h
new file mode 100644
index 00000000000..b1ec5253752
--- /dev/null
+++ b/net/ieee802154/af802154.h
@@ -0,0 +1,36 @@
+/*
+ * Internal interfaces for ieee 802.15.4 address family.
+ *
+ * Copyright 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef AF802154_H
+#define AF802154_H
+
+struct sk_buff;
+struct net_devce;
+extern struct proto ieee802154_raw_prot;
+extern struct proto ieee802154_dgram_prot;
+void ieee802154_raw_deliver(struct net_device *dev, struct sk_buff *skb);
+int ieee802154_dgram_deliver(struct net_device *dev, struct sk_buff *skb);
+struct net_device *ieee802154_get_dev(struct net *net,
+		struct ieee802154_addr *addr);
+
+#endif
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
new file mode 100644
index 00000000000..882a927cefa
--- /dev/null
+++ b/net/ieee802154/af_ieee802154.c
@@ -0,0 +1,372 @@
+/*
+ * IEEE802154.4 socket interface
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ */
+
+#include <linux/net.h>
+#include <linux/capability.h>
+#include <linux/module.h>
+#include <linux/if_arp.h>
+#include <linux/if.h>
+#include <linux/termios.h>	/* For TIOCOUTQ/INQ */
+#include <linux/list.h>
+#include <net/datalink.h>
+#include <net/psnap.h>
+#include <net/sock.h>
+#include <net/tcp_states.h>
+#include <net/route.h>
+
+#include <net/ieee802154/af_ieee802154.h>
+#include <net/ieee802154/netdevice.h>
+
+#include "af802154.h"
+
+#define DBG_DUMP(data, len) { \
+	int i; \
+	pr_debug("function: %s: data: len %d:\n", __func__, len); \
+	for (i = 0; i < len; i++) {\
+		pr_debug("%02x: %02x\n", i, (data)[i]); \
+	} \
+}
+
+/*
+ * Utility function for families
+ */
+struct net_device *ieee802154_get_dev(struct net *net,
+		struct ieee802154_addr *addr)
+{
+	struct net_device *dev = NULL;
+	struct net_device *tmp;
+	u16 pan_id, short_addr;
+
+	switch (addr->addr_type) {
+	case IEEE802154_ADDR_LONG:
+		rtnl_lock();
+		dev = dev_getbyhwaddr(net, ARPHRD_IEEE802154, addr->hwaddr);
+		if (dev)
+			dev_hold(dev);
+		rtnl_unlock();
+		break;
+	case IEEE802154_ADDR_SHORT:
+		if (addr->pan_id == 0xffff ||
+		    addr->short_addr == IEEE802154_ADDR_UNDEF ||
+		    addr->short_addr == 0xffff)
+			break;
+
+		rtnl_lock();
+
+		for_each_netdev(net, tmp) {
+			if (tmp->type != ARPHRD_IEEE802154)
+				continue;
+
+			pan_id = ieee802154_mlme_ops(tmp)->get_pan_id(tmp);
+			short_addr =
+				ieee802154_mlme_ops(tmp)->get_short_addr(tmp);
+
+			if (pan_id == addr->pan_id &&
+			    short_addr == addr->short_addr) {
+				dev = tmp;
+				dev_hold(dev);
+				break;
+			}
+		}
+
+		rtnl_unlock();
+		break;
+	default:
+		pr_warning("Unsupported ieee802154 address type: %d\n",
+				addr->addr_type);
+		break;
+	}
+
+	return dev;
+}
+
+static int ieee802154_sock_release(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+
+	if (sk) {
+		sock->sk = NULL;
+		sk->sk_prot->close(sk, 0);
+	}
+	return 0;
+}
+static int ieee802154_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
+		struct msghdr *msg, size_t len)
+{
+	struct sock *sk = sock->sk;
+
+	return sk->sk_prot->sendmsg(iocb, sk, msg, len);
+}
+
+static int ieee802154_sock_bind(struct socket *sock, struct sockaddr *uaddr,
+		int addr_len)
+{
+	struct sock *sk = sock->sk;
+
+	if (sk->sk_prot->bind)
+		return sk->sk_prot->bind(sk, uaddr, addr_len);
+
+	return sock_no_bind(sock, uaddr, addr_len);
+}
+
+static int ieee802154_sock_connect(struct socket *sock, struct sockaddr *uaddr,
+			int addr_len, int flags)
+{
+	struct sock *sk = sock->sk;
+
+	if (uaddr->sa_family == AF_UNSPEC)
+		return sk->sk_prot->disconnect(sk, flags);
+
+	return sk->sk_prot->connect(sk, uaddr, addr_len);
+}
+
+static int ieee802154_dev_ioctl(struct sock *sk, struct ifreq __user *arg,
+		unsigned int cmd)
+{
+	struct ifreq ifr;
+	int ret = -EINVAL;
+	struct net_device *dev;
+
+	if (copy_from_user(&ifr, arg, sizeof(struct ifreq)))
+		return -EFAULT;
+
+	ifr.ifr_name[IFNAMSIZ-1] = 0;
+
+	dev_load(sock_net(sk), ifr.ifr_name);
+	dev = dev_get_by_name(sock_net(sk), ifr.ifr_name);
+	if (dev->type == ARPHRD_IEEE802154 ||
+	    dev->type == ARPHRD_IEEE802154_PHY)
+		ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd);
+
+	if (!ret && copy_to_user(arg, &ifr, sizeof(struct ifreq)))
+		ret = -EFAULT;
+	dev_put(dev);
+
+	return ret;
+}
+
+static int ieee802154_sock_ioctl(struct socket *sock, unsigned int cmd,
+		unsigned long arg)
+{
+	struct sock *sk = sock->sk;
+
+	switch (cmd) {
+	case SIOCGSTAMP:
+		return sock_get_timestamp(sk, (struct timeval __user *)arg);
+	case SIOCGSTAMPNS:
+		return sock_get_timestampns(sk, (struct timespec __user *)arg);
+	case SIOCGIFADDR:
+	case SIOCSIFADDR:
+		return ieee802154_dev_ioctl(sk, (struct ifreq __user *)arg,
+				cmd);
+	default:
+		if (!sk->sk_prot->ioctl)
+			return -ENOIOCTLCMD;
+		return sk->sk_prot->ioctl(sk, cmd, arg);
+	}
+}
+
+static const struct proto_ops ieee802154_raw_ops = {
+	.family		   = PF_IEEE802154,
+	.owner		   = THIS_MODULE,
+	.release	   = ieee802154_sock_release,
+	.bind		   = ieee802154_sock_bind,
+	.connect	   = ieee802154_sock_connect,
+	.socketpair	   = sock_no_socketpair,
+	.accept		   = sock_no_accept,
+	.getname	   = sock_no_getname,
+	.poll		   = datagram_poll,
+	.ioctl		   = ieee802154_sock_ioctl,
+	.listen		   = sock_no_listen,
+	.shutdown	   = sock_no_shutdown,
+	.setsockopt	   = sock_common_setsockopt,
+	.getsockopt	   = sock_common_getsockopt,
+	.sendmsg	   = ieee802154_sock_sendmsg,
+	.recvmsg	   = sock_common_recvmsg,
+	.mmap		   = sock_no_mmap,
+	.sendpage	   = sock_no_sendpage,
+#ifdef CONFIG_COMPAT
+	.compat_setsockopt = compat_sock_common_setsockopt,
+	.compat_getsockopt = compat_sock_common_getsockopt,
+#endif
+};
+
+static const struct proto_ops ieee802154_dgram_ops = {
+	.family		   = PF_IEEE802154,
+	.owner		   = THIS_MODULE,
+	.release	   = ieee802154_sock_release,
+	.bind		   = ieee802154_sock_bind,
+	.connect	   = ieee802154_sock_connect,
+	.socketpair	   = sock_no_socketpair,
+	.accept		   = sock_no_accept,
+	.getname	   = sock_no_getname,
+	.poll		   = datagram_poll,
+	.ioctl		   = ieee802154_sock_ioctl,
+	.listen		   = sock_no_listen,
+	.shutdown	   = sock_no_shutdown,
+	.setsockopt	   = sock_common_setsockopt,
+	.getsockopt	   = sock_common_getsockopt,
+	.sendmsg	   = ieee802154_sock_sendmsg,
+	.recvmsg	   = sock_common_recvmsg,
+	.mmap		   = sock_no_mmap,
+	.sendpage	   = sock_no_sendpage,
+#ifdef CONFIG_COMPAT
+	.compat_setsockopt = compat_sock_common_setsockopt,
+	.compat_getsockopt = compat_sock_common_getsockopt,
+#endif
+};
+
+
+/*
+ * Create a socket. Initialise the socket, blank the addresses
+ * set the state.
+ */
+static int ieee802154_create(struct net *net, struct socket *sock,
+		int protocol)
+{
+	struct sock *sk;
+	int rc;
+	struct proto *proto;
+	const struct proto_ops *ops;
+
+	if (net != &init_net)
+		return -EAFNOSUPPORT;
+
+	switch (sock->type) {
+	case SOCK_RAW:
+		proto = &ieee802154_raw_prot;
+		ops = &ieee802154_raw_ops;
+		break;
+	case SOCK_DGRAM:
+		proto = &ieee802154_dgram_prot;
+		ops = &ieee802154_dgram_ops;
+		break;
+	default:
+		rc = -ESOCKTNOSUPPORT;
+		goto out;
+	}
+
+	rc = -ENOMEM;
+	sk = sk_alloc(net, PF_IEEE802154, GFP_KERNEL, proto);
+	if (!sk)
+		goto out;
+	rc = 0;
+
+	sock->ops = ops;
+
+	sock_init_data(sock, sk);
+	/* FIXME: sk->sk_destruct */
+	sk->sk_family = PF_IEEE802154;
+
+	/* Checksums on by default */
+	sock_set_flag(sk, SOCK_ZAPPED);
+
+	if (sk->sk_prot->hash)
+		sk->sk_prot->hash(sk);
+
+	if (sk->sk_prot->init) {
+		rc = sk->sk_prot->init(sk);
+		if (rc)
+			sk_common_release(sk);
+	}
+out:
+	return rc;
+}
+
+static struct net_proto_family ieee802154_family_ops = {
+	.family		= PF_IEEE802154,
+	.create		= ieee802154_create,
+	.owner		= THIS_MODULE,
+};
+
+static int ieee802154_rcv(struct sk_buff *skb, struct net_device *dev,
+	struct packet_type *pt, struct net_device *orig_dev)
+{
+	DBG_DUMP(skb->data, skb->len);
+	if (!netif_running(dev))
+		return -ENODEV;
+	pr_debug("got frame, type %d, dev %p\n", dev->type, dev);
+
+	if (!net_eq(dev_net(dev), &init_net))
+		goto drop;
+
+	ieee802154_raw_deliver(dev, skb);
+
+	if (dev->type != ARPHRD_IEEE802154)
+		goto drop;
+
+	if (skb->pkt_type != PACKET_OTHERHOST)
+		return ieee802154_dgram_deliver(dev, skb);
+
+drop:
+	kfree_skb(skb);
+	return NET_RX_DROP;
+}
+
+
+static struct packet_type ieee802154_packet_type = {
+	.type = __constant_htons(ETH_P_IEEE802154),
+	.func = ieee802154_rcv,
+};
+
+static int __init af_ieee802154_init(void)
+{
+	int rc = -EINVAL;
+
+	rc = proto_register(&ieee802154_raw_prot, 1);
+	if (rc)
+		goto out;
+
+	rc = proto_register(&ieee802154_dgram_prot, 1);
+	if (rc)
+		goto err_dgram;
+
+	/* Tell SOCKET that we are alive */
+	rc = sock_register(&ieee802154_family_ops);
+	if (rc)
+		goto err_sock;
+	dev_add_pack(&ieee802154_packet_type);
+
+	rc = 0;
+	goto out;
+
+err_sock:
+	proto_unregister(&ieee802154_dgram_prot);
+err_dgram:
+	proto_unregister(&ieee802154_raw_prot);
+out:
+	return rc;
+}
+static void __exit af_ieee802154_remove(void)
+{
+	dev_remove_pack(&ieee802154_packet_type);
+	sock_unregister(PF_IEEE802154);
+	proto_unregister(&ieee802154_dgram_prot);
+	proto_unregister(&ieee802154_raw_prot);
+}
+
+module_init(af_ieee802154_init);
+module_exit(af_ieee802154_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_NETPROTO(PF_IEEE802154);
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
new file mode 100644
index 00000000000..1779677aed4
--- /dev/null
+++ b/net/ieee802154/dgram.c
@@ -0,0 +1,394 @@
+/*
+ * ZigBee socket interface
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#include <linux/net.h>
+#include <linux/module.h>
+#include <linux/if_arp.h>
+#include <linux/list.h>
+#include <net/sock.h>
+#include <net/ieee802154/af_ieee802154.h>
+#include <net/ieee802154/mac_def.h>
+#include <net/ieee802154/netdevice.h>
+
+#include <asm/ioctls.h>
+
+#include "af802154.h"
+
+static HLIST_HEAD(dgram_head);
+static DEFINE_RWLOCK(dgram_lock);
+
+struct dgram_sock {
+	struct sock sk;
+
+	int bound;
+	struct ieee802154_addr src_addr;
+	struct ieee802154_addr dst_addr;
+};
+
+static inline struct dgram_sock *dgram_sk(const struct sock *sk)
+{
+	return container_of(sk, struct dgram_sock, sk);
+}
+
+
+static void dgram_hash(struct sock *sk)
+{
+	write_lock_bh(&dgram_lock);
+	sk_add_node(sk, &dgram_head);
+	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
+	write_unlock_bh(&dgram_lock);
+}
+
+static void dgram_unhash(struct sock *sk)
+{
+	write_lock_bh(&dgram_lock);
+	if (sk_del_node_init(sk))
+		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
+	write_unlock_bh(&dgram_lock);
+}
+
+static int dgram_init(struct sock *sk)
+{
+	struct dgram_sock *ro = dgram_sk(sk);
+
+	ro->dst_addr.addr_type = IEEE802154_ADDR_LONG;
+	ro->dst_addr.pan_id = 0xffff;
+	memset(&ro->dst_addr.hwaddr, 0xff, sizeof(ro->dst_addr.hwaddr));
+	return 0;
+}
+
+static void dgram_close(struct sock *sk, long timeout)
+{
+	sk_common_release(sk);
+}
+
+static int dgram_bind(struct sock *sk, struct sockaddr *uaddr, int len)
+{
+	struct sockaddr_ieee802154 *addr = (struct sockaddr_ieee802154 *)uaddr;
+	struct dgram_sock *ro = dgram_sk(sk);
+	int err = 0;
+	struct net_device *dev;
+
+	ro->bound = 0;
+
+	if (len < sizeof(*addr))
+		return -EINVAL;
+
+	if (addr->family != AF_IEEE802154)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	dev = ieee802154_get_dev(sock_net(sk), &addr->addr);
+	if (!dev) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	if (dev->type != ARPHRD_IEEE802154) {
+		err = -ENODEV;
+		goto out_put;
+	}
+
+	memcpy(&ro->src_addr, &addr->addr, sizeof(struct ieee802154_addr));
+
+	ro->bound = 1;
+out_put:
+	dev_put(dev);
+out:
+	release_sock(sk);
+
+	return err;
+}
+
+static int dgram_ioctl(struct sock *sk, int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case SIOCOUTQ:
+	{
+		int amount = atomic_read(&sk->sk_wmem_alloc);
+		return put_user(amount, (int __user *)arg);
+	}
+
+	case SIOCINQ:
+	{
+		struct sk_buff *skb;
+		unsigned long amount;
+
+		amount = 0;
+		spin_lock_bh(&sk->sk_receive_queue.lock);
+		skb = skb_peek(&sk->sk_receive_queue);
+		if (skb != NULL) {
+			/*
+			 * We will only return the amount
+			 * of this packet since that is all
+			 * that will be read.
+			 */
+			/* FIXME: parse the header for more correct value */
+			amount = skb->len - (3+8+8);
+		}
+		spin_unlock_bh(&sk->sk_receive_queue.lock);
+		return put_user(amount, (int __user *)arg);
+	}
+
+	}
+	return -ENOIOCTLCMD;
+}
+
+/* FIXME: autobind */
+static int dgram_connect(struct sock *sk, struct sockaddr *uaddr,
+			int len)
+{
+	struct sockaddr_ieee802154 *addr = (struct sockaddr_ieee802154 *)uaddr;
+	struct dgram_sock *ro = dgram_sk(sk);
+	int err = 0;
+
+	if (len < sizeof(*addr))
+		return -EINVAL;
+
+	if (addr->family != AF_IEEE802154)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	if (!ro->bound) {
+		err = -ENETUNREACH;
+		goto out;
+	}
+
+	memcpy(&ro->dst_addr, &addr->addr, sizeof(struct ieee802154_addr));
+
+out:
+	release_sock(sk);
+	return err;
+}
+
+static int dgram_disconnect(struct sock *sk, int flags)
+{
+	struct dgram_sock *ro = dgram_sk(sk);
+
+	lock_sock(sk);
+
+	ro->dst_addr.addr_type = IEEE802154_ADDR_LONG;
+	memset(&ro->dst_addr.hwaddr, 0xff, sizeof(ro->dst_addr.hwaddr));
+
+	release_sock(sk);
+
+	return 0;
+}
+
+static int dgram_sendmsg(struct kiocb *iocb, struct sock *sk,
+		struct msghdr *msg, size_t size)
+{
+	struct net_device *dev;
+	unsigned mtu;
+	struct sk_buff *skb;
+	struct dgram_sock *ro = dgram_sk(sk);
+	int err;
+
+	if (msg->msg_flags & MSG_OOB) {
+		pr_debug("msg->msg_flags = 0x%x\n", msg->msg_flags);
+		return -EOPNOTSUPP;
+	}
+
+	if (!ro->bound)
+		dev = dev_getfirstbyhwtype(sock_net(sk), ARPHRD_IEEE802154);
+	else
+		dev = ieee802154_get_dev(sock_net(sk), &ro->src_addr);
+
+	if (!dev) {
+		pr_debug("no dev\n");
+		err = -ENXIO;
+		goto out;
+	}
+	mtu = dev->mtu;
+	pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
+
+	skb = sock_alloc_send_skb(sk, LL_ALLOCATED_SPACE(dev) + size,
+			msg->msg_flags & MSG_DONTWAIT,
+			&err);
+	if (!skb)
+		goto out_dev;
+
+	skb_reserve(skb, LL_RESERVED_SPACE(dev));
+
+	skb_reset_network_header(skb);
+
+	mac_cb(skb)->flags = IEEE802154_FC_TYPE_DATA | MAC_CB_FLAG_ACKREQ;
+	mac_cb(skb)->seq = ieee802154_mlme_ops(dev)->get_dsn(dev);
+	err = dev_hard_header(skb, dev, ETH_P_IEEE802154, &ro->dst_addr,
+			ro->bound ? &ro->src_addr : NULL, size);
+	if (err < 0)
+		goto out_skb;
+
+	skb_reset_mac_header(skb);
+
+	err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
+	if (err < 0)
+		goto out_skb;
+
+	if (size > mtu) {
+		pr_debug("size = %Zu, mtu = %u\n", size, mtu);
+		err = -EINVAL;
+		goto out_skb;
+	}
+
+	skb->dev = dev;
+	skb->sk  = sk;
+	skb->protocol = htons(ETH_P_IEEE802154);
+
+	dev_put(dev);
+
+	err = dev_queue_xmit(skb);
+	if (err > 0)
+		err = net_xmit_errno(err);
+
+	return err ?: size;
+
+out_skb:
+	kfree_skb(skb);
+out_dev:
+	dev_put(dev);
+out:
+	return err;
+}
+
+static int dgram_recvmsg(struct kiocb *iocb, struct sock *sk,
+		struct msghdr *msg, size_t len, int noblock, int flags,
+		int *addr_len)
+{
+	size_t copied = 0;
+	int err = -EOPNOTSUPP;
+	struct sk_buff *skb;
+
+	skb = skb_recv_datagram(sk, flags, noblock, &err);
+	if (!skb)
+		goto out;
+
+	copied = skb->len;
+	if (len < copied) {
+		msg->msg_flags |= MSG_TRUNC;
+		copied = len;
+	}
+
+	/* FIXME: skip headers if necessary ?! */
+	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+	if (err)
+		goto done;
+
+	sock_recv_timestamp(msg, sk, skb);
+
+	if (flags & MSG_TRUNC)
+		copied = skb->len;
+done:
+	skb_free_datagram(sk, skb);
+out:
+	if (err)
+		return err;
+	return copied;
+}
+
+static int dgram_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+	if (sock_queue_rcv_skb(sk, skb) < 0) {
+		atomic_inc(&sk->sk_drops);
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+
+	return NET_RX_SUCCESS;
+}
+
+static inline int ieee802154_match_sock(u8 *hw_addr, u16 pan_id,
+		u16 short_addr, struct dgram_sock *ro)
+{
+	if (!ro->bound)
+		return 1;
+
+	if (ro->src_addr.addr_type == IEEE802154_ADDR_LONG &&
+	    !memcmp(ro->src_addr.hwaddr, hw_addr, IEEE802154_ADDR_LEN))
+		return 1;
+
+	if (ro->src_addr.addr_type == IEEE802154_ADDR_SHORT &&
+		     pan_id == ro->src_addr.pan_id &&
+		     short_addr == ro->src_addr.short_addr)
+		return 1;
+
+	return 0;
+}
+
+int ieee802154_dgram_deliver(struct net_device *dev, struct sk_buff *skb)
+{
+	struct sock *sk, *prev = NULL;
+	struct hlist_node *node;
+	int ret = NET_RX_SUCCESS;
+	u16 pan_id, short_addr;
+
+	/* Data frame processing */
+	BUG_ON(dev->type != ARPHRD_IEEE802154);
+
+	pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
+	short_addr = ieee802154_mlme_ops(dev)->get_short_addr(dev);
+
+	read_lock(&dgram_lock);
+	sk_for_each(sk, node, &dgram_head) {
+		if (ieee802154_match_sock(dev->dev_addr, pan_id, short_addr,
+					dgram_sk(sk))) {
+			if (prev) {
+				struct sk_buff *clone;
+				clone = skb_clone(skb, GFP_ATOMIC);
+				if (clone)
+					dgram_rcv_skb(prev, clone);
+			}
+
+			prev = sk;
+		}
+	}
+
+	if (prev)
+		dgram_rcv_skb(prev, skb);
+	else {
+		kfree_skb(skb);
+		ret = NET_RX_DROP;
+	}
+	read_unlock(&dgram_lock);
+
+	return ret;
+}
+
+struct proto ieee802154_dgram_prot = {
+	.name		= "IEEE-802.15.4-MAC",
+	.owner		= THIS_MODULE,
+	.obj_size	= sizeof(struct dgram_sock),
+	.init		= dgram_init,
+	.close		= dgram_close,
+	.bind		= dgram_bind,
+	.sendmsg	= dgram_sendmsg,
+	.recvmsg	= dgram_recvmsg,
+	.hash		= dgram_hash,
+	.unhash		= dgram_unhash,
+	.connect	= dgram_connect,
+	.disconnect	= dgram_disconnect,
+	.ioctl		= dgram_ioctl,
+};
+
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
new file mode 100644
index 00000000000..105ad10876a
--- /dev/null
+++ b/net/ieee802154/netlink.c
@@ -0,0 +1,523 @@
+/*
+ * Netlink inteface for IEEE 802.15.4 stack
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <net/netlink.h>
+#include <net/genetlink.h>
+#include <linux/nl802154.h>
+#include <net/ieee802154/af_ieee802154.h>
+#include <net/ieee802154/nl802154.h>
+#include <net/ieee802154/netdevice.h>
+
+static unsigned int ieee802154_seq_num;
+
+static struct genl_family ieee802154_coordinator_family = {
+	.id		= GENL_ID_GENERATE,
+	.hdrsize	= 0,
+	.name		= IEEE802154_NL_NAME,
+	.version	= 1,
+	.maxattr	= IEEE802154_ATTR_MAX,
+};
+
+static struct genl_multicast_group ieee802154_coord_mcgrp = {
+	.name		= IEEE802154_MCAST_COORD_NAME,
+};
+
+static struct genl_multicast_group ieee802154_beacon_mcgrp = {
+	.name		= IEEE802154_MCAST_BEACON_NAME,
+};
+
+/* Requests to userspace */
+static struct sk_buff *ieee802154_nl_create(int flags, u8 req)
+{
+	void *hdr;
+	struct sk_buff *msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
+
+	if (!msg)
+		return NULL;
+
+	hdr = genlmsg_put(msg, 0, ieee802154_seq_num++,
+			&ieee802154_coordinator_family, flags, req);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return NULL;
+	}
+
+	return msg;
+}
+
+static int ieee802154_nl_finish(struct sk_buff *msg)
+{
+	/* XXX: nlh is right at the start of msg */
+	void *hdr = genlmsg_data(NLMSG_DATA(msg->data));
+
+	if (!genlmsg_end(msg, hdr))
+		goto out;
+
+	return genlmsg_multicast(msg, 0, ieee802154_coord_mcgrp.id,
+			GFP_ATOMIC);
+out:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+
+int ieee802154_nl_assoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 cap)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	if (addr->addr_type != IEEE802154_ADDR_LONG) {
+		pr_err("%s: received non-long source address!\n", __func__);
+		return -EINVAL;
+	}
+
+	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
+			addr->hwaddr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_CAPABILITY, cap);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_assoc_indic);
+
+int ieee802154_nl_assoc_confirm(struct net_device *dev, u16 short_addr,
+		u8 status)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U16(msg, IEEE802154_ATTR_SHORT_ADDR, short_addr);
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_assoc_confirm);
+
+int ieee802154_nl_disassoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	if (addr->addr_type == IEEE802154_ADDR_LONG)
+		NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
+				addr->hwaddr);
+	else
+		NLA_PUT_U16(msg, IEEE802154_ATTR_SRC_SHORT_ADDR,
+				addr->short_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_REASON, reason);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_disassoc_indic);
+
+int ieee802154_nl_disassoc_confirm(struct net_device *dev, u8 status)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_disassoc_confirm);
+
+int ieee802154_nl_beacon_indic(struct net_device *dev,
+		u16 panid, u16 coord_addr)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_BEACON_NOTIFY_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+	NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_SHORT_ADDR, coord_addr);
+	NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_PAN_ID, panid);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_beacon_indic);
+
+int ieee802154_nl_scan_confirm(struct net_device *dev,
+		u8 status, u8 scan_type, u32 unscanned,
+		u8 *edl/* , struct list_head *pan_desc_list */)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_SCAN_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+	NLA_PUT_U8(msg, IEEE802154_ATTR_SCAN_TYPE, scan_type);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_CHANNELS, unscanned);
+
+	if (edl)
+		NLA_PUT(msg, IEEE802154_ATTR_ED_LIST, 27, edl);
+
+	return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_scan_confirm);
+
+/* Requests from userspace */
+static struct net_device *ieee802154_nl_get_dev(struct genl_info *info)
+{
+	struct net_device *dev;
+
+	if (info->attrs[IEEE802154_ATTR_DEV_NAME]) {
+		char name[IFNAMSIZ + 1];
+		nla_strlcpy(name, info->attrs[IEEE802154_ATTR_DEV_NAME],
+				sizeof(name));
+		dev = dev_get_by_name(&init_net, name);
+	} else if (info->attrs[IEEE802154_ATTR_DEV_INDEX])
+		dev = dev_get_by_index(&init_net,
+				nla_get_u32(info->attrs[IEEE802154_ATTR_DEV_INDEX]));
+	else
+		return NULL;
+
+	if (dev->type != ARPHRD_IEEE802154) {
+		dev_put(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+static int ieee802154_associate_req(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	int ret = -EINVAL;
+
+	if (!info->attrs[IEEE802154_ATTR_CHANNEL] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
+	    (!info->attrs[IEEE802154_ATTR_COORD_HW_ADDR] &&
+		!info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]) ||
+	    !info->attrs[IEEE802154_ATTR_CAPABILITY])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	if (info->attrs[IEEE802154_ATTR_COORD_HW_ADDR]) {
+		addr.addr_type = IEEE802154_ADDR_LONG;
+		nla_memcpy(addr.hwaddr,
+				info->attrs[IEEE802154_ATTR_COORD_HW_ADDR],
+				IEEE802154_ADDR_LEN);
+	} else {
+		addr.addr_type = IEEE802154_ADDR_SHORT;
+		addr.short_addr = nla_get_u16(
+				info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
+	}
+	addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
+
+	ret = ieee802154_mlme_ops(dev)->assoc_req(dev, &addr,
+			nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]),
+			nla_get_u8(info->attrs[IEEE802154_ATTR_CAPABILITY]));
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_associate_resp(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	int ret = -EINVAL;
+
+	if (!info->attrs[IEEE802154_ATTR_STATUS] ||
+	    !info->attrs[IEEE802154_ATTR_DEST_HW_ADDR] ||
+	    !info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	addr.addr_type = IEEE802154_ADDR_LONG;
+	nla_memcpy(addr.hwaddr, info->attrs[IEEE802154_ATTR_DEST_HW_ADDR],
+			IEEE802154_ADDR_LEN);
+	addr.pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
+
+
+	ret = ieee802154_mlme_ops(dev)->assoc_resp(dev, &addr,
+		nla_get_u16(info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]),
+		nla_get_u8(info->attrs[IEEE802154_ATTR_STATUS]));
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_disassociate_req(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	int ret = -EINVAL;
+
+	if ((!info->attrs[IEEE802154_ATTR_DEST_HW_ADDR] &&
+		!info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]) ||
+	    !info->attrs[IEEE802154_ATTR_REASON])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	if (info->attrs[IEEE802154_ATTR_DEST_HW_ADDR]) {
+		addr.addr_type = IEEE802154_ADDR_LONG;
+		nla_memcpy(addr.hwaddr,
+				info->attrs[IEEE802154_ATTR_DEST_HW_ADDR],
+				IEEE802154_ADDR_LEN);
+	} else {
+		addr.addr_type = IEEE802154_ADDR_SHORT;
+		addr.short_addr = nla_get_u16(
+				info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]);
+	}
+	addr.pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
+
+	ret = ieee802154_mlme_ops(dev)->disassoc_req(dev, &addr,
+			nla_get_u8(info->attrs[IEEE802154_ATTR_REASON]));
+
+	dev_put(dev);
+	return ret;
+}
+
+/*
+ * PANid, channel, beacon_order = 15, superframe_order = 15,
+ * PAN_coordinator, battery_life_extension = 0,
+ * coord_realignment = 0, security_enable = 0
+*/
+static int ieee802154_start_req(struct sk_buff *skb, struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+
+	u8 channel, bcn_ord, sf_ord;
+	int pan_coord, blx, coord_realign;
+	int ret;
+
+	if (!info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR] ||
+	    !info->attrs[IEEE802154_ATTR_CHANNEL] ||
+	    !info->attrs[IEEE802154_ATTR_BCN_ORD] ||
+	    !info->attrs[IEEE802154_ATTR_SF_ORD] ||
+	    !info->attrs[IEEE802154_ATTR_PAN_COORD] ||
+	    !info->attrs[IEEE802154_ATTR_BAT_EXT] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_REALIGN]
+	 )
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	addr.addr_type = IEEE802154_ADDR_SHORT;
+	addr.short_addr = nla_get_u16(
+			info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
+	addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
+
+	channel = nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]);
+	bcn_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_BCN_ORD]);
+	sf_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_SF_ORD]);
+	pan_coord = nla_get_u8(info->attrs[IEEE802154_ATTR_PAN_COORD]);
+	blx = nla_get_u8(info->attrs[IEEE802154_ATTR_BAT_EXT]);
+	coord_realign = nla_get_u8(info->attrs[IEEE802154_ATTR_COORD_REALIGN]);
+
+	ret = ieee802154_mlme_ops(dev)->start_req(dev, &addr, channel,
+		bcn_ord, sf_ord, pan_coord, blx, coord_realign);
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_scan_req(struct sk_buff *skb, struct genl_info *info)
+{
+	struct net_device *dev;
+	int ret;
+	u8 type;
+	u32 channels;
+	u8 duration;
+
+	if (!info->attrs[IEEE802154_ATTR_SCAN_TYPE] ||
+	    !info->attrs[IEEE802154_ATTR_CHANNELS] ||
+	    !info->attrs[IEEE802154_ATTR_DURATION])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	type = nla_get_u8(info->attrs[IEEE802154_ATTR_SCAN_TYPE]);
+	channels = nla_get_u32(info->attrs[IEEE802154_ATTR_CHANNELS]);
+	duration = nla_get_u8(info->attrs[IEEE802154_ATTR_DURATION]);
+
+	ret = ieee802154_mlme_ops(dev)->scan_req(dev, type, channels,
+			duration);
+
+	dev_put(dev);
+	return ret;
+}
+
+#define IEEE802154_OP(_cmd, _func)			\
+	{						\
+		.cmd	= _cmd,				\
+		.policy	= ieee802154_policy,		\
+		.doit	= _func,			\
+		.dumpit	= NULL,				\
+		.flags	= GENL_ADMIN_PERM,		\
+	}
+
+static struct genl_ops ieee802154_coordinator_ops[] = {
+	IEEE802154_OP(IEEE802154_ASSOCIATE_REQ, ieee802154_associate_req),
+	IEEE802154_OP(IEEE802154_ASSOCIATE_RESP, ieee802154_associate_resp),
+	IEEE802154_OP(IEEE802154_DISASSOCIATE_REQ, ieee802154_disassociate_req),
+	IEEE802154_OP(IEEE802154_SCAN_REQ, ieee802154_scan_req),
+	IEEE802154_OP(IEEE802154_START_REQ, ieee802154_start_req),
+};
+
+static int __init ieee802154_nl_init(void)
+{
+	int rc;
+	int i;
+
+	rc = genl_register_family(&ieee802154_coordinator_family);
+	if (rc)
+		goto fail;
+
+	rc = genl_register_mc_group(&ieee802154_coordinator_family,
+			&ieee802154_coord_mcgrp);
+	if (rc)
+		goto fail;
+
+	rc = genl_register_mc_group(&ieee802154_coordinator_family,
+			&ieee802154_beacon_mcgrp);
+	if (rc)
+		goto fail;
+
+
+	for (i = 0; i < ARRAY_SIZE(ieee802154_coordinator_ops); i++) {
+		rc = genl_register_ops(&ieee802154_coordinator_family,
+				&ieee802154_coordinator_ops[i]);
+		if (rc)
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	genl_unregister_family(&ieee802154_coordinator_family);
+	return rc;
+}
+module_init(ieee802154_nl_init);
+
+static void __exit ieee802154_nl_exit(void)
+{
+	genl_unregister_family(&ieee802154_coordinator_family);
+}
+module_exit(ieee802154_nl_exit);
+
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
new file mode 100644
index 00000000000..c7d71d1adca
--- /dev/null
+++ b/net/ieee802154/nl_policy.c
@@ -0,0 +1,52 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <net/netlink.h>
+#include <linux/nl802154.h>
+
+#define NLA_HW_ADDR NLA_U64
+
+struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
+	[IEEE802154_ATTR_DEV_NAME] = { .type = NLA_STRING, },
+	[IEEE802154_ATTR_DEV_INDEX] = { .type = NLA_U32, },
+
+	[IEEE802154_ATTR_STATUS] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_SHORT_ADDR] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_HW_ADDR] = { .type = NLA_HW_ADDR, },
+	[IEEE802154_ATTR_PAN_ID] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_CHANNEL] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_COORD_SHORT_ADDR] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_COORD_HW_ADDR] = { .type = NLA_HW_ADDR, },
+	[IEEE802154_ATTR_COORD_PAN_ID] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_SRC_SHORT_ADDR] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_SRC_HW_ADDR] = { .type = NLA_HW_ADDR, },
+	[IEEE802154_ATTR_SRC_PAN_ID] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_DEST_SHORT_ADDR] = { .type = NLA_U16, },
+	[IEEE802154_ATTR_DEST_HW_ADDR] = { .type = NLA_HW_ADDR, },
+	[IEEE802154_ATTR_DEST_PAN_ID] = { .type = NLA_U16, },
+
+	[IEEE802154_ATTR_CAPABILITY] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_REASON] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_SCAN_TYPE] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_CHANNELS] = { .type = NLA_U32, },
+	[IEEE802154_ATTR_DURATION] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_ED_LIST] = { .len = 27 },
+};
diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c
new file mode 100644
index 00000000000..fca44d59f97
--- /dev/null
+++ b/net/ieee802154/raw.c
@@ -0,0 +1,254 @@
+/*
+ * Raw IEEE 802.15.4 sockets
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#include <linux/net.h>
+#include <linux/module.h>
+#include <linux/if_arp.h>
+#include <linux/list.h>
+#include <net/sock.h>
+#include <net/ieee802154/af_ieee802154.h>
+
+#include "af802154.h"
+
+static HLIST_HEAD(raw_head);
+static DEFINE_RWLOCK(raw_lock);
+
+static void raw_hash(struct sock *sk)
+{
+	write_lock_bh(&raw_lock);
+	sk_add_node(sk, &raw_head);
+	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
+	write_unlock_bh(&raw_lock);
+}
+
+static void raw_unhash(struct sock *sk)
+{
+	write_lock_bh(&raw_lock);
+	if (sk_del_node_init(sk))
+		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
+	write_unlock_bh(&raw_lock);
+}
+
+static void raw_close(struct sock *sk, long timeout)
+{
+	sk_common_release(sk);
+}
+
+static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int len)
+{
+	struct sockaddr_ieee802154 *addr = (struct sockaddr_ieee802154 *)uaddr;
+	int err = 0;
+	struct net_device *dev = NULL;
+
+	if (len < sizeof(*addr))
+		return -EINVAL;
+
+	if (addr->family != AF_IEEE802154)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	dev = ieee802154_get_dev(sock_net(sk), &addr->addr);
+	if (!dev) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	if (dev->type != ARPHRD_IEEE802154_PHY &&
+	    dev->type != ARPHRD_IEEE802154) {
+		err = -ENODEV;
+		goto out_put;
+	}
+
+	sk->sk_bound_dev_if = dev->ifindex;
+	sk_dst_reset(sk);
+
+out_put:
+	dev_put(dev);
+out:
+	release_sock(sk);
+
+	return err;
+}
+
+static int raw_connect(struct sock *sk, struct sockaddr *uaddr,
+			int addr_len)
+{
+	return -ENOTSUPP;
+}
+
+static int raw_disconnect(struct sock *sk, int flags)
+{
+	return 0;
+}
+
+static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		       size_t size)
+{
+	struct net_device *dev;
+	unsigned mtu;
+	struct sk_buff *skb;
+	int err;
+
+	if (msg->msg_flags & MSG_OOB) {
+		pr_debug("msg->msg_flags = 0x%x\n", msg->msg_flags);
+		return -EOPNOTSUPP;
+	}
+
+	lock_sock(sk);
+	if (!sk->sk_bound_dev_if)
+		dev = dev_getfirstbyhwtype(sock_net(sk), ARPHRD_IEEE802154);
+	else
+		dev = dev_get_by_index(sock_net(sk), sk->sk_bound_dev_if);
+	release_sock(sk);
+
+	if (!dev) {
+		pr_debug("no dev\n");
+		err = -ENXIO;
+		goto out;
+	}
+
+	mtu = dev->mtu;
+	pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
+
+	if (size > mtu) {
+		pr_debug("size = %Zu, mtu = %u\n", size, mtu);
+		err = -EINVAL;
+		goto out_dev;
+	}
+
+	skb = sock_alloc_send_skb(sk, LL_ALLOCATED_SPACE(dev) + size,
+			msg->msg_flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		goto out_dev;
+
+	skb_reserve(skb, LL_RESERVED_SPACE(dev));
+
+	skb_reset_mac_header(skb);
+	skb_reset_network_header(skb);
+
+	err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
+	if (err < 0)
+		goto out_skb;
+
+	skb->dev = dev;
+	skb->sk  = sk;
+	skb->protocol = htons(ETH_P_IEEE802154);
+
+	dev_put(dev);
+
+	err = dev_queue_xmit(skb);
+	if (err > 0)
+		err = net_xmit_errno(err);
+
+	return err ?: size;
+
+out_skb:
+	kfree_skb(skb);
+out_dev:
+	dev_put(dev);
+out:
+	return err;
+}
+
+static int raw_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		       size_t len, int noblock, int flags, int *addr_len)
+{
+	size_t copied = 0;
+	int err = -EOPNOTSUPP;
+	struct sk_buff *skb;
+
+	skb = skb_recv_datagram(sk, flags, noblock, &err);
+	if (!skb)
+		goto out;
+
+	copied = skb->len;
+	if (len < copied) {
+		msg->msg_flags |= MSG_TRUNC;
+		copied = len;
+	}
+
+	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+	if (err)
+		goto done;
+
+	sock_recv_timestamp(msg, sk, skb);
+
+	if (flags & MSG_TRUNC)
+		copied = skb->len;
+done:
+	skb_free_datagram(sk, skb);
+out:
+	if (err)
+		return err;
+	return copied;
+}
+
+static int raw_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+	if (sock_queue_rcv_skb(sk, skb) < 0) {
+		atomic_inc(&sk->sk_drops);
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+
+	return NET_RX_SUCCESS;
+}
+
+
+void ieee802154_raw_deliver(struct net_device *dev, struct sk_buff *skb)
+{
+	struct sock *sk;
+	struct hlist_node *node;
+
+	read_lock(&raw_lock);
+	sk_for_each(sk, node, &raw_head) {
+		bh_lock_sock(sk);
+		if (!sk->sk_bound_dev_if ||
+		    sk->sk_bound_dev_if == dev->ifindex) {
+
+			struct sk_buff *clone;
+
+			clone = skb_clone(skb, GFP_ATOMIC);
+			if (clone)
+				raw_rcv_skb(sk, clone);
+		}
+		bh_unlock_sock(sk);
+	}
+	read_unlock(&raw_lock);
+}
+
+struct proto ieee802154_raw_prot = {
+	.name		= "IEEE-802.15.4-RAW",
+	.owner		= THIS_MODULE,
+	.obj_size	= sizeof(struct sock),
+	.close		= raw_close,
+	.bind		= raw_bind,
+	.sendmsg	= raw_sendmsg,
+	.recvmsg	= raw_recvmsg,
+	.hash		= raw_hash,
+	.unhash		= raw_unhash,
+	.connect	= raw_connect,
+	.disconnect	= raw_disconnect,
+};
+
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 5b919f7b45d..70491d9035e 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -273,29 +273,20 @@ config IP_PIMSM_V2
 	  you want to play with it.
 
 config ARPD
-	bool "IP: ARP daemon support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "IP: ARP daemon support"
 	---help---
-	  Normally, the kernel maintains an internal cache which maps IP
-	  addresses to hardware addresses on the local network, so that
-	  Ethernet/Token Ring/ etc. frames are sent to the proper address on
-	  the physical networking layer. For small networks having a few
-	  hundred directly connected hosts or less, keeping this address
-	  resolution (ARP) cache inside the kernel works well. However,
-	  maintaining an internal ARP cache does not work well for very large
-	  switched networks, and will use a lot of kernel memory if TCP/IP
-	  connections are made to many machines on the network.
-
-	  If you say Y here, the kernel's internal ARP cache will never grow
-	  to more than 256 entries (the oldest entries are expired in a LIFO
-	  manner) and communication will be attempted with the user space ARP
-	  daemon arpd. Arpd then answers the address resolution request either
-	  from its own cache or by asking the net.
-
-	  This code is experimental and also obsolete. If you want to use it,
-	  you need to find a version of the daemon arpd on the net somewhere,
-	  and you should also say Y to "Kernel/User network link driver",
-	  below. If unsure, say N.
+	  The kernel maintains an internal cache which maps IP addresses to
+	  hardware addresses on the local network, so that Ethernet/Token Ring/
+	  etc. frames are sent to the proper address on the physical networking
+	  layer. Normally, kernel uses the ARP protocol to resolve these
+	  mappings.
+
+	  Saying Y here adds support to have an user space daemon to do this
+	  resolution instead. This is useful for implementing an alternate
+	  address resolution protocol (e.g. NHRP on mGRE tunnels) and also for
+	  testing purposes.
+
+	  If unsure, say N.
 
 config SYN_COOKIES
 	bool "IP: TCP syncookie support (disabled per default)"
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 7f03373b8c0..566ea6c4321 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -116,7 +116,6 @@
 #include <linux/mroute.h>
 #endif
 
-extern void ip_mc_drop_socket(struct sock *sk);
 
 /* The inetsw table contains everything that inet_create needs to
  * build a new socket.
@@ -375,6 +374,7 @@ lookup_protocol:
 	inet->uc_ttl	= -1;
 	inet->mc_loop	= 1;
 	inet->mc_ttl	= 1;
+	inet->mc_all	= 1;
 	inet->mc_index	= 0;
 	inet->mc_list	= NULL;
 
@@ -1003,8 +1003,6 @@ void inet_register_protosw(struct inet_protosw *p)
 out:
 	spin_unlock_bh(&inetsw_lock);
 
-	synchronize_net();
-
 	return;
 
 out_permanent:
@@ -1248,13 +1246,20 @@ static struct sk_buff **inet_gro_receive(struct sk_buff **head,
 	struct sk_buff **pp = NULL;
 	struct sk_buff *p;
 	struct iphdr *iph;
+	unsigned int hlen;
+	unsigned int off;
+	unsigned int id;
 	int flush = 1;
 	int proto;
-	int id;
 
-	iph = skb_gro_header(skb, sizeof(*iph));
-	if (unlikely(!iph))
-		goto out;
+	off = skb_gro_offset(skb);
+	hlen = off + sizeof(*iph);
+	iph = skb_gro_header_fast(skb, off);
+	if (skb_gro_header_hard(skb, hlen)) {
+		iph = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!iph))
+			goto out;
+	}
 
 	proto = iph->protocol & (MAX_INET_PROTOS - 1);
 
@@ -1269,9 +1274,9 @@ static struct sk_buff **inet_gro_receive(struct sk_buff **head,
 	if (unlikely(ip_fast_csum((u8 *)iph, iph->ihl)))
 		goto out_unlock;
 
-	flush = ntohs(iph->tot_len) != skb_gro_len(skb) ||
-		iph->frag_off != htons(IP_DF);
-	id = ntohs(iph->id);
+	id = ntohl(*(u32 *)&iph->id);
+	flush = (u16)((ntohl(*(u32 *)iph) ^ skb_gro_len(skb)) | (id ^ IP_DF));
+	id >>= 16;
 
 	for (p = *head; p; p = p->next) {
 		struct iphdr *iph2;
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index f11931c1838..8a3881e28ac 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -468,13 +468,13 @@ int arp_find(unsigned char *haddr, struct sk_buff *skb)
 	__be32 paddr;
 	struct neighbour *n;
 
-	if (!skb->dst) {
+	if (!skb_dst(skb)) {
 		printk(KERN_DEBUG "arp_find is called with dst==NULL\n");
 		kfree_skb(skb);
 		return 1;
 	}
 
-	paddr = skb->rtable->rt_gateway;
+	paddr = skb_rtable(skb)->rt_gateway;
 
 	if (arp_set_predefined(inet_addr_type(dev_net(dev), paddr), haddr, paddr, dev))
 		return 0;
@@ -817,7 +817,7 @@ static int arp_process(struct sk_buff *skb)
 	if (arp->ar_op == htons(ARPOP_REQUEST) &&
 	    ip_route_input(skb, tip, sip, 0, dev) == 0) {
 
-		rt = skb->rtable;
+		rt = skb_rtable(skb);
 		addr_type = rt->rt_type;
 
 		if (addr_type == RTN_LOCAL) {
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 126bb911880..3863c3a4223 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1347,7 +1347,8 @@ static int devinet_sysctl_forward(ctl_table *ctl, int write,
 		struct net *net = ctl->extra2;
 
 		if (valp != &IPV4_DEVCONF_DFLT(net, FORWARDING)) {
-			rtnl_lock();
+			if (!rtnl_trylock())
+				return restart_syscall();
 			if (valp == &IPV4_DEVCONF_ALL(net, FORWARDING)) {
 				inet_forward_change(net);
 			} else if (*valp) {
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index cafcc49d099..e2f95059256 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -40,7 +40,6 @@
 #include <net/route.h>
 #include <net/tcp.h>
 #include <net/sock.h>
-#include <net/icmp.h>
 #include <net/arp.h>
 #include <net/ip_fib.h>
 #include <net/rtnetlink.h>
diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c
index ded8c44fb84..ecd39454235 100644
--- a/net/ipv4/fib_hash.c
+++ b/net/ipv4/fib_hash.c
@@ -263,7 +263,6 @@ fn_hash_lookup(struct fib_table *tb, const struct flowi *flp, struct fib_result
 
 			err = fib_semantic_match(&f->fn_alias,
 						 flp, res,
-						 f->fn_key, fz->fz_mask,
 						 fz->fz_order);
 			if (err <= 0)
 				goto out;
diff --git a/net/ipv4/fib_lookup.h b/net/ipv4/fib_lookup.h
index 2c1623d2768..637b133973b 100644
--- a/net/ipv4/fib_lookup.h
+++ b/net/ipv4/fib_lookup.h
@@ -22,8 +22,7 @@ struct fib_alias {
 /* Exported by fib_semantics.c */
 extern int fib_semantic_match(struct list_head *head,
 			      const struct flowi *flp,
-			      struct fib_result *res, __be32 zone, __be32 mask,
-				int prefixlen);
+			      struct fib_result *res, int prefixlen);
 extern void fib_release_info(struct fib_info *);
 extern struct fib_info *fib_create_info(struct fib_config *cfg);
 extern int fib_nh_match(struct fib_config *cfg, struct fib_info *fi);
diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c
index 6080d712082..92d9d97ec5e 100644
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -134,7 +134,7 @@ static const struct nla_policy fib4_rule_policy[FRA_MAX+1] = {
 };
 
 static int fib4_rule_configure(struct fib_rule *rule, struct sk_buff *skb,
-			       struct nlmsghdr *nlh, struct fib_rule_hdr *frh,
+			       struct fib_rule_hdr *frh,
 			       struct nlattr **tb)
 {
 	struct net *net = sock_net(skb->sk);
@@ -209,7 +209,7 @@ static int fib4_rule_compare(struct fib_rule *rule, struct fib_rule_hdr *frh,
 }
 
 static int fib4_rule_fill(struct fib_rule *rule, struct sk_buff *skb,
-			  struct nlmsghdr *nlh, struct fib_rule_hdr *frh)
+			  struct fib_rule_hdr *frh)
 {
 	struct fib4_rule *rule4 = (struct fib4_rule *) rule;
 
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index f831df50090..9b096d6ff3f 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -866,8 +866,7 @@ failure:
 
 /* Note! fib_semantic_match intentionally uses  RCU list functions. */
 int fib_semantic_match(struct list_head *head, const struct flowi *flp,
-		       struct fib_result *res, __be32 zone, __be32 mask,
-			int prefixlen)
+		       struct fib_result *res, int prefixlen)
 {
 	struct fib_alias *fa;
 	int nh_sel = 0;
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 33c7c85dfe4..d1a39b1277d 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -123,6 +123,7 @@ struct tnode {
 	union {
 		struct rcu_head rcu;
 		struct work_struct work;
+		struct tnode *tnode_free;
 	};
 	struct node *child[0];
 };
@@ -161,6 +162,8 @@ static void tnode_put_child_reorg(struct tnode *tn, int i, struct node *n,
 static struct node *resize(struct trie *t, struct tnode *tn);
 static struct tnode *inflate(struct trie *t, struct tnode *tn);
 static struct tnode *halve(struct trie *t, struct tnode *tn);
+/* tnodes to free after resize(); protected by RTNL */
+static struct tnode *tnode_free_head;
 
 static struct kmem_cache *fn_alias_kmem __read_mostly;
 static struct kmem_cache *trie_leaf_kmem __read_mostly;
@@ -385,6 +388,29 @@ static inline void tnode_free(struct tnode *tn)
 		call_rcu(&tn->rcu, __tnode_free_rcu);
 }
 
+static void tnode_free_safe(struct tnode *tn)
+{
+	BUG_ON(IS_LEAF(tn));
+
+	if (node_parent((struct node *) tn)) {
+		tn->tnode_free = tnode_free_head;
+		tnode_free_head = tn;
+	} else {
+		tnode_free(tn);
+	}
+}
+
+static void tnode_free_flush(void)
+{
+	struct tnode *tn;
+
+	while ((tn = tnode_free_head)) {
+		tnode_free_head = tn->tnode_free;
+		tn->tnode_free = NULL;
+		tnode_free(tn);
+	}
+}
+
 static struct leaf *leaf_new(void)
 {
 	struct leaf *l = kmem_cache_alloc(trie_leaf_kmem, GFP_KERNEL);
@@ -495,7 +521,7 @@ static struct node *resize(struct trie *t, struct tnode *tn)
 
 	/* No children */
 	if (tn->empty_children == tnode_child_length(tn)) {
-		tnode_free(tn);
+		tnode_free_safe(tn);
 		return NULL;
 	}
 	/* One child */
@@ -509,7 +535,7 @@ static struct node *resize(struct trie *t, struct tnode *tn)
 
 			/* compress one level */
 			node_set_parent(n, NULL);
-			tnode_free(tn);
+			tnode_free_safe(tn);
 			return n;
 		}
 	/*
@@ -670,7 +696,7 @@ static struct node *resize(struct trie *t, struct tnode *tn)
 			/* compress one level */
 
 			node_set_parent(n, NULL);
-			tnode_free(tn);
+			tnode_free_safe(tn);
 			return n;
 		}
 
@@ -756,7 +782,7 @@ static struct tnode *inflate(struct trie *t, struct tnode *tn)
 			put_child(t, tn, 2*i, inode->child[0]);
 			put_child(t, tn, 2*i+1, inode->child[1]);
 
-			tnode_free(inode);
+			tnode_free_safe(inode);
 			continue;
 		}
 
@@ -801,9 +827,9 @@ static struct tnode *inflate(struct trie *t, struct tnode *tn)
 		put_child(t, tn, 2*i, resize(t, left));
 		put_child(t, tn, 2*i+1, resize(t, right));
 
-		tnode_free(inode);
+		tnode_free_safe(inode);
 	}
-	tnode_free(oldtnode);
+	tnode_free_safe(oldtnode);
 	return tn;
 nomem:
 	{
@@ -885,7 +911,7 @@ static struct tnode *halve(struct trie *t, struct tnode *tn)
 		put_child(t, newBinNode, 1, right);
 		put_child(t, tn, i/2, resize(t, newBinNode));
 	}
-	tnode_free(oldtnode);
+	tnode_free_safe(oldtnode);
 	return tn;
 nomem:
 	{
@@ -989,7 +1015,6 @@ static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
 	t_key cindex, key;
 	struct tnode *tp;
 
-	preempt_disable();
 	key = tn->key;
 
 	while (tn != NULL && (tp = node_parent((struct node *)tn)) != NULL) {
@@ -1001,16 +1026,18 @@ static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
 				      (struct node *)tn, wasfull);
 
 		tp = node_parent((struct node *) tn);
+		tnode_free_flush();
 		if (!tp)
 			break;
 		tn = tp;
 	}
 
 	/* Handle last (top) tnode */
-	if (IS_TNODE(tn))
+	if (IS_TNODE(tn)) {
 		tn = (struct tnode *)resize(t, (struct tnode *)tn);
+		tnode_free_flush();
+	}
 
-	preempt_enable();
 	return (struct node *)tn;
 }
 
@@ -1351,8 +1378,7 @@ static int check_leaf(struct trie *t, struct leaf *l,
 		if (l->key != (key & ntohl(mask)))
 			continue;
 
-		err = fib_semantic_match(&li->falh, flp, res,
-					 htonl(l->key), mask, plen);
+		err = fib_semantic_match(&li->falh, flp, res, plen);
 
 #ifdef CONFIG_IP_FIB_TRIE_STATS
 		if (err <= 0)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 3f50807237e..97c410e8438 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -356,7 +356,7 @@ static void icmp_push_reply(struct icmp_bxm *icmp_param,
 static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
 {
 	struct ipcm_cookie ipc;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct net *net = dev_net(rt->u.dst.dev);
 	struct sock *sk;
 	struct inet_sock *inet;
@@ -416,7 +416,7 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 	struct iphdr *iph;
 	int room;
 	struct icmp_bxm icmp_param;
-	struct rtable *rt = skb_in->rtable;
+	struct rtable *rt = skb_rtable(skb_in);
 	struct ipcm_cookie ipc;
 	__be32 saddr;
 	u8  tos;
@@ -591,13 +591,13 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 				goto relookup_failed;
 
 			/* Ugh! */
-			odst = skb_in->dst;
+			odst = skb_dst(skb_in);
 			err = ip_route_input(skb_in, fl.fl4_dst, fl.fl4_src,
 					     RT_TOS(tos), rt2->u.dst.dev);
 
 			dst_release(&rt2->u.dst);
-			rt2 = skb_in->rtable;
-			skb_in->dst = odst;
+			rt2 = skb_rtable(skb_in);
+			skb_dst_set(skb_in, odst);
 		}
 
 		if (err)
@@ -659,7 +659,7 @@ static void icmp_unreach(struct sk_buff *skb)
 	u32 info = 0;
 	struct net *net;
 
-	net = dev_net(skb->dst->dev);
+	net = dev_net(skb_dst(skb)->dev);
 
 	/*
 	 *	Incomplete header ?
@@ -822,7 +822,7 @@ static void icmp_echo(struct sk_buff *skb)
 {
 	struct net *net;
 
-	net = dev_net(skb->dst->dev);
+	net = dev_net(skb_dst(skb)->dev);
 	if (!net->ipv4.sysctl_icmp_echo_ignore_all) {
 		struct icmp_bxm icmp_param;
 
@@ -873,7 +873,7 @@ static void icmp_timestamp(struct sk_buff *skb)
 out:
 	return;
 out_err:
-	ICMP_INC_STATS_BH(dev_net(skb->dst->dev), ICMP_MIB_INERRORS);
+	ICMP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ICMP_MIB_INERRORS);
 	goto out;
 }
 
@@ -926,7 +926,7 @@ static void icmp_address(struct sk_buff *skb)
 
 static void icmp_address_reply(struct sk_buff *skb)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct net_device *dev = skb->dev;
 	struct in_device *in_dev;
 	struct in_ifaddr *ifa;
@@ -970,7 +970,7 @@ static void icmp_discard(struct sk_buff *skb)
 int icmp_rcv(struct sk_buff *skb)
 {
 	struct icmphdr *icmph;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct net *net = dev_net(rt->u.dst.dev);
 
 	if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 9eb6219af61..01b4284ed69 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -311,7 +311,7 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 		return NULL;
 	}
 
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 	skb->dev = dev;
 
 	skb_reserve(skb, LL_RESERVED_SPACE(dev));
@@ -659,7 +659,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 		return -1;
 	}
 
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 
 	skb_reserve(skb, LL_RESERVED_SPACE(dev));
 
@@ -948,7 +948,7 @@ int igmp_rcv(struct sk_buff *skb)
 	case IGMPV2_HOST_MEMBERSHIP_REPORT:
 	case IGMPV3_HOST_MEMBERSHIP_REPORT:
 		/* Is it our report looped back? */
-		if (skb->rtable->fl.iif == 0)
+		if (skb_rtable(skb)->fl.iif == 0)
 			break;
 		/* don't rely on MC router hearing unicast reports */
 		if (skb->pkt_type == PACKET_MULTICAST ||
@@ -2196,7 +2196,7 @@ int ip_mc_sf_allow(struct sock *sk, __be32 loc_addr, __be32 rmt_addr, int dif)
 			break;
 	}
 	if (!pmc)
-		return 1;
+		return inet->mc_all;
 	psl = pmc->sflist;
 	if (!psl)
 		return pmc->sfmode == MCAST_EXCLUDE;
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 588a7796e3e..b0b273503e2 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -198,8 +198,6 @@ static int inet_twsk_diag_fill(struct inet_timewait_sock *tw,
 		tmo = 0;
 
 	r->idiag_family	      = tw->tw_family;
-	r->idiag_state	      = tw->tw_state;
-	r->idiag_timer	      = 0;
 	r->idiag_retrans      = 0;
 	r->id.idiag_if	      = tw->tw_bound_dev_if;
 	r->id.idiag_cookie[0] = (u32)(unsigned long)tw;
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 8554d0ea171..61283f92882 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/kmemcheck.h>
 #include <net/inet_hashtables.h>
 #include <net/inet_timewait_sock.h>
 #include <net/ip.h>
@@ -49,19 +50,22 @@ static void __inet_twsk_kill(struct inet_timewait_sock *tw,
 	inet_twsk_put(tw);
 }
 
-void inet_twsk_put(struct inet_timewait_sock *tw)
+static noinline void inet_twsk_free(struct inet_timewait_sock *tw)
 {
-	if (atomic_dec_and_test(&tw->tw_refcnt)) {
-		struct module *owner = tw->tw_prot->owner;
-		twsk_destructor((struct sock *)tw);
+	struct module *owner = tw->tw_prot->owner;
+	twsk_destructor((struct sock *)tw);
 #ifdef SOCK_REFCNT_DEBUG
-		printk(KERN_DEBUG "%s timewait_sock %p released\n",
-		       tw->tw_prot->name, tw);
+	pr_debug("%s timewait_sock %p released\n", tw->tw_prot->name, tw);
 #endif
-		release_net(twsk_net(tw));
-		kmem_cache_free(tw->tw_prot->twsk_prot->twsk_slab, tw);
-		module_put(owner);
-	}
+	release_net(twsk_net(tw));
+	kmem_cache_free(tw->tw_prot->twsk_prot->twsk_slab, tw);
+	module_put(owner);
+}
+
+void inet_twsk_put(struct inet_timewait_sock *tw)
+{
+	if (atomic_dec_and_test(&tw->tw_refcnt))
+		inet_twsk_free(tw);
 }
 EXPORT_SYMBOL_GPL(inet_twsk_put);
 
@@ -117,6 +121,8 @@ struct inet_timewait_sock *inet_twsk_alloc(const struct sock *sk, const int stat
 	if (tw != NULL) {
 		const struct inet_sock *inet = inet_sk(sk);
 
+		kmemcheck_annotate_bitfield(tw, flags);
+
 		/* Give us an identity. */
 		tw->tw_daddr	    = inet->daddr;
 		tw->tw_rcv_saddr    = inet->rcv_saddr;
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index df3fe50bbf0..a2991bc8e32 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -42,7 +42,7 @@ static int ip_forward_finish(struct sk_buff *skb)
 {
 	struct ip_options * opt	= &(IPCB(skb)->opt);
 
-	IP_INC_STATS_BH(dev_net(skb->dst->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
 
 	if (unlikely(opt->optlen))
 		ip_forward_options(skb);
@@ -81,7 +81,7 @@ int ip_forward(struct sk_buff *skb)
 	if (!xfrm4_route_forward(skb))
 		goto drop;
 
-	rt = skb->rtable;
+	rt = skb_rtable(skb);
 
 	if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
 		goto sr_failed;
@@ -123,7 +123,7 @@ sr_failed:
 
 too_many_hops:
 	/* Tell the sender its packet died... */
-	IP_INC_STATS_BH(dev_net(skb->dst->dev), IPSTATS_MIB_INHDRERRORS);
+	IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_INHDRERRORS);
 	icmp_send(skb, ICMP_TIME_EXCEEDED, ICMP_EXC_TTL, 0);
 drop:
 	kfree_skb(skb);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 7985346653b..575f9bd51cc 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -507,7 +507,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 	/* If the first fragment is fragmented itself, we split
 	 * it to two chunks: the first with data and paged part
 	 * and the second, holding only fragments. */
-	if (skb_shinfo(head)->frag_list) {
+	if (skb_has_frags(head)) {
 		struct sk_buff *clone;
 		int i, plen = 0;
 
@@ -516,7 +516,7 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 		clone->next = head->next;
 		head->next = clone;
 		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
-		skb_shinfo(head)->frag_list = NULL;
+		skb_frag_list_init(head);
 		for (i=0; i<skb_shinfo(head)->nr_frags; i++)
 			plen += skb_shinfo(head)->frags[i].size;
 		clone->len = clone->data_len = head->data_len - plen;
@@ -573,7 +573,7 @@ int ip_defrag(struct sk_buff *skb, u32 user)
 	struct ipq *qp;
 	struct net *net;
 
-	net = skb->dev ? dev_net(skb->dev) : dev_net(skb->dst->dev);
+	net = skb->dev ? dev_net(skb->dev) : dev_net(skb_dst(skb)->dev);
 	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMREQDS);
 
 	/* Start by cleaning up the memory. */
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index e62510d5ea5..44e2a3d2359 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -602,7 +602,7 @@ static int ipgre_rcv(struct sk_buff *skb)
 #ifdef CONFIG_NET_IPGRE_BROADCAST
 		if (ipv4_is_multicast(iph->daddr)) {
 			/* Looped back packet, drop it! */
-			if (skb->rtable->fl.iif == 0)
+			if (skb_rtable(skb)->fl.iif == 0)
 				goto drop;
 			stats->multicast++;
 			skb->pkt_type = PACKET_BROADCAST;
@@ -643,8 +643,7 @@ static int ipgre_rcv(struct sk_buff *skb)
 		stats->rx_packets++;
 		stats->rx_bytes += len;
 		skb->dev = tunnel->dev;
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 
 		skb_reset_network_header(skb);
@@ -698,13 +697,13 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if ((dst = tiph->daddr) == 0) {
 		/* NBMA tunnel */
 
-		if (skb->dst == NULL) {
+		if (skb_dst(skb) == NULL) {
 			stats->tx_fifo_errors++;
 			goto tx_error;
 		}
 
 		if (skb->protocol == htons(ETH_P_IP)) {
-			rt = skb->rtable;
+			rt = skb_rtable(skb);
 			if ((dst = rt->rt_gateway) == 0)
 				goto tx_error_icmp;
 		}
@@ -712,7 +711,7 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 		else if (skb->protocol == htons(ETH_P_IPV6)) {
 			struct in6_addr *addr6;
 			int addr_type;
-			struct neighbour *neigh = skb->dst->neighbour;
+			struct neighbour *neigh = skb_dst(skb)->neighbour;
 
 			if (neigh == NULL)
 				goto tx_error;
@@ -766,10 +765,10 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (df)
 		mtu = dst_mtu(&rt->u.dst) - dev->hard_header_len - tunnel->hlen;
 	else
-		mtu = skb->dst ? dst_mtu(skb->dst) : dev->mtu;
+		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	if (skb->protocol == htons(ETH_P_IP)) {
 		df |= (old_iph->frag_off&htons(IP_DF));
@@ -783,14 +782,14 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 #ifdef CONFIG_IPV6
 	else if (skb->protocol == htons(ETH_P_IPV6)) {
-		struct rt6_info *rt6 = (struct rt6_info *)skb->dst;
+		struct rt6_info *rt6 = (struct rt6_info *)skb_dst(skb);
 
-		if (rt6 && mtu < dst_mtu(skb->dst) && mtu >= IPV6_MIN_MTU) {
+		if (rt6 && mtu < dst_mtu(skb_dst(skb)) && mtu >= IPV6_MIN_MTU) {
 			if ((tunnel->parms.iph.daddr &&
 			     !ipv4_is_multicast(tunnel->parms.iph.daddr)) ||
 			    rt6->rt6i_dst.plen == 128) {
 				rt6->rt6i_flags |= RTF_MODIFIED;
-				skb->dst->metrics[RTAX_MTU-1] = mtu;
+				skb_dst(skb)->metrics[RTAX_MTU-1] = mtu;
 			}
 		}
 
@@ -837,8 +836,8 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 	IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
 			      IPSKB_REROUTED);
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
@@ -1238,6 +1237,7 @@ static void ipgre_tunnel_setup(struct net_device *dev)
 	dev->iflink		= 0;
 	dev->addr_len		= 4;
 	dev->features		|= NETIF_F_NETNS_LOCAL;
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 }
 
 static int ipgre_tunnel_init(struct net_device *dev)
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 1a58a6fa1dc..490ce20faf3 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -329,7 +329,7 @@ static int ip_rcv_finish(struct sk_buff *skb)
 	 *	Initialise the virtual path cache for the packet. It describes
 	 *	how the packet travels inside Linux networking.
 	 */
-	if (skb->dst == NULL) {
+	if (skb_dst(skb) == NULL) {
 		int err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos,
 					 skb->dev);
 		if (unlikely(err)) {
@@ -344,9 +344,9 @@ static int ip_rcv_finish(struct sk_buff *skb)
 	}
 
 #ifdef CONFIG_NET_CLS_ROUTE
-	if (unlikely(skb->dst->tclassid)) {
+	if (unlikely(skb_dst(skb)->tclassid)) {
 		struct ip_rt_acct *st = per_cpu_ptr(ip_rt_acct, smp_processor_id());
-		u32 idx = skb->dst->tclassid;
+		u32 idx = skb_dst(skb)->tclassid;
 		st[idx&0xFF].o_packets++;
 		st[idx&0xFF].o_bytes += skb->len;
 		st[(idx>>16)&0xFF].i_packets++;
@@ -357,11 +357,13 @@ static int ip_rcv_finish(struct sk_buff *skb)
 	if (iph->ihl > 5 && ip_rcv_options(skb))
 		goto drop;
 
-	rt = skb->rtable;
-	if (rt->rt_type == RTN_MULTICAST)
-		IP_INC_STATS_BH(dev_net(rt->u.dst.dev), IPSTATS_MIB_INMCASTPKTS);
-	else if (rt->rt_type == RTN_BROADCAST)
-		IP_INC_STATS_BH(dev_net(rt->u.dst.dev), IPSTATS_MIB_INBCASTPKTS);
+	rt = skb_rtable(skb);
+	if (rt->rt_type == RTN_MULTICAST) {
+		IP_UPD_PO_STATS_BH(dev_net(rt->u.dst.dev), IPSTATS_MIB_INMCAST,
+				skb->len);
+	} else if (rt->rt_type == RTN_BROADCAST)
+		IP_UPD_PO_STATS_BH(dev_net(rt->u.dst.dev), IPSTATS_MIB_INBCAST,
+				skb->len);
 
 	return dst_input(skb);
 
@@ -384,7 +386,8 @@ int ip_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt,
 	if (skb->pkt_type == PACKET_OTHERHOST)
 		goto drop;
 
-	IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_INRECEIVES);
+
+	IP_UPD_PO_STATS_BH(dev_net(dev), IPSTATS_MIB_IN, skb->len);
 
 	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
 		IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_INDISCARDS);
diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c
index 2c88da6e786..94bf105ef3c 100644
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -102,7 +102,7 @@ int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
 	sptr = skb_network_header(skb);
 	dptr = dopt->__data;
 
-	daddr = skb->rtable->rt_spec_dst;
+	daddr = skb_rtable(skb)->rt_spec_dst;
 
 	if (sopt->rr) {
 		optlen  = sptr[sopt->rr+1];
@@ -143,7 +143,7 @@ int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
 						__be32 addr;
 
 						memcpy(&addr, sptr+soffset-1, 4);
-						if (inet_addr_type(dev_net(skb->dst->dev), addr) != RTN_LOCAL) {
+						if (inet_addr_type(dev_net(skb_dst(skb)->dev), addr) != RTN_LOCAL) {
 							dopt->ts_needtime = 1;
 							soffset += 8;
 						}
@@ -257,7 +257,7 @@ int ip_options_compile(struct net *net,
 	struct rtable *rt = NULL;
 
 	if (skb != NULL) {
-		rt = skb->rtable;
+		rt = skb_rtable(skb);
 		optptr = (unsigned char *)&(ip_hdr(skb)[1]);
 	} else
 		optptr = opt->__data;
@@ -550,7 +550,7 @@ void ip_forward_options(struct sk_buff *skb)
 {
 	struct   ip_options * opt	= &(IPCB(skb)->opt);
 	unsigned char * optptr;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	unsigned char *raw = skb_network_header(skb);
 
 	if (opt->rr_needaddr) {
@@ -598,7 +598,7 @@ int ip_options_rcv_srr(struct sk_buff *skb)
 	__be32 nexthop;
 	struct iphdr *iph = ip_hdr(skb);
 	unsigned char *optptr = skb_network_header(skb) + opt->srr;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct rtable *rt2;
 	int err;
 
@@ -623,13 +623,13 @@ int ip_options_rcv_srr(struct sk_buff *skb)
 		}
 		memcpy(&nexthop, &optptr[srrptr-1], 4);
 
-		rt = skb->rtable;
-		skb->rtable = NULL;
+		rt = skb_rtable(skb);
+		skb_dst_set(skb, NULL);
 		err = ip_route_input(skb, nexthop, iph->saddr, iph->tos, skb->dev);
-		rt2 = skb->rtable;
+		rt2 = skb_rtable(skb);
 		if (err || (rt2->rt_type != RTN_UNICAST && rt2->rt_type != RTN_LOCAL)) {
 			ip_rt_put(rt2);
-			skb->rtable = rt;
+			skb_dst_set(skb, &rt->u.dst);
 			return -EINVAL;
 		}
 		ip_rt_put(rt);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 3e7e910c7c0..24702628266 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -95,7 +95,7 @@ int __ip_local_out(struct sk_buff *skb)
 
 	iph->tot_len = htons(skb->len);
 	ip_send_check(iph);
-	return nf_hook(PF_INET, NF_INET_LOCAL_OUT, skb, NULL, skb->dst->dev,
+	return nf_hook(PF_INET, NF_INET_LOCAL_OUT, skb, NULL, skb_dst(skb)->dev,
 		       dst_output);
 }
 
@@ -118,7 +118,7 @@ static int ip_dev_loopback_xmit(struct sk_buff *newskb)
 	__skb_pull(newskb, skb_network_offset(newskb));
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
-	WARN_ON(!newskb->dst);
+	WARN_ON(!skb_dst(newskb));
 	netif_rx(newskb);
 	return 0;
 }
@@ -140,7 +140,7 @@ int ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
 			  __be32 saddr, __be32 daddr, struct ip_options *opt)
 {
 	struct inet_sock *inet = inet_sk(sk);
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct iphdr *iph;
 
 	/* Build the IP header. */
@@ -176,15 +176,15 @@ EXPORT_SYMBOL_GPL(ip_build_and_send_pkt);
 
 static inline int ip_finish_output2(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct rtable *rt = (struct rtable *)dst;
 	struct net_device *dev = dst->dev;
 	unsigned int hh_len = LL_RESERVED_SPACE(dev);
 
-	if (rt->rt_type == RTN_MULTICAST)
-		IP_INC_STATS(dev_net(dev), IPSTATS_MIB_OUTMCASTPKTS);
-	else if (rt->rt_type == RTN_BROADCAST)
-		IP_INC_STATS(dev_net(dev), IPSTATS_MIB_OUTBCASTPKTS);
+	if (rt->rt_type == RTN_MULTICAST) {
+		IP_UPD_PO_STATS(dev_net(dev), IPSTATS_MIB_OUTMCAST, skb->len);
+	} else if (rt->rt_type == RTN_BROADCAST)
+		IP_UPD_PO_STATS(dev_net(dev), IPSTATS_MIB_OUTBCAST, skb->len);
 
 	/* Be paranoid, rather than too clever. */
 	if (unlikely(skb_headroom(skb) < hh_len && dev->header_ops)) {
@@ -217,14 +217,14 @@ static inline int ip_skb_dst_mtu(struct sk_buff *skb)
 	struct inet_sock *inet = skb->sk ? inet_sk(skb->sk) : NULL;
 
 	return (inet && inet->pmtudisc == IP_PMTUDISC_PROBE) ?
-	       skb->dst->dev->mtu : dst_mtu(skb->dst);
+	       skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
 }
 
 static int ip_finish_output(struct sk_buff *skb)
 {
 #if defined(CONFIG_NETFILTER) && defined(CONFIG_XFRM)
 	/* Policy lookup after SNAT yielded a new policy */
-	if (skb->dst->xfrm != NULL) {
+	if (skb_dst(skb)->xfrm != NULL) {
 		IPCB(skb)->flags |= IPSKB_REROUTED;
 		return dst_output(skb);
 	}
@@ -238,13 +238,13 @@ static int ip_finish_output(struct sk_buff *skb)
 int ip_mc_output(struct sk_buff *skb)
 {
 	struct sock *sk = skb->sk;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct net_device *dev = rt->u.dst.dev;
 
 	/*
 	 *	If the indicated interface is up and running, send the packet.
 	 */
-	IP_INC_STATS(dev_net(dev), IPSTATS_MIB_OUTREQUESTS);
+	IP_UPD_PO_STATS(dev_net(dev), IPSTATS_MIB_OUT, skb->len);
 
 	skb->dev = dev;
 	skb->protocol = htons(ETH_P_IP);
@@ -296,9 +296,9 @@ int ip_mc_output(struct sk_buff *skb)
 
 int ip_output(struct sk_buff *skb)
 {
-	struct net_device *dev = skb->dst->dev;
+	struct net_device *dev = skb_dst(skb)->dev;
 
-	IP_INC_STATS(dev_net(dev), IPSTATS_MIB_OUTREQUESTS);
+	IP_UPD_PO_STATS(dev_net(dev), IPSTATS_MIB_OUT, skb->len);
 
 	skb->dev = dev;
 	skb->protocol = htons(ETH_P_IP);
@@ -319,7 +319,7 @@ int ip_queue_xmit(struct sk_buff *skb, int ipfragok)
 	/* Skip all of this if the packet is already routed,
 	 * f.e. by something like SCTP.
 	 */
-	rt = skb->rtable;
+	rt = skb_rtable(skb);
 	if (rt != NULL)
 		goto packet_routed;
 
@@ -355,7 +355,7 @@ int ip_queue_xmit(struct sk_buff *skb, int ipfragok)
 		}
 		sk_setup_caps(sk, &rt->u.dst);
 	}
-	skb->dst = dst_clone(&rt->u.dst);
+	skb_dst_set(skb, dst_clone(&rt->u.dst));
 
 packet_routed:
 	if (opt && opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
@@ -401,8 +401,8 @@ static void ip_copy_metadata(struct sk_buff *to, struct sk_buff *from)
 	to->pkt_type = from->pkt_type;
 	to->priority = from->priority;
 	to->protocol = from->protocol;
-	dst_release(to->dst);
-	to->dst = dst_clone(from->dst);
+	skb_dst_drop(to);
+	skb_dst_set(to, dst_clone(skb_dst(from)));
 	to->dev = from->dev;
 	to->mark = from->mark;
 
@@ -440,7 +440,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	unsigned int mtu, hlen, left, len, ll_rs, pad;
 	int offset;
 	__be16 not_last_frag;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	int err = 0;
 
 	dev = rt->u.dst.dev;
@@ -474,7 +474,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	 * LATER: this step can be merged to real generation of fragments,
 	 * we can switch to copy when see the first bad fragment.
 	 */
-	if (skb_shinfo(skb)->frag_list) {
+	if (skb_has_frags(skb)) {
 		struct sk_buff *frag;
 		int first_len = skb_pagelen(skb);
 		int truesizes = 0;
@@ -485,7 +485,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 		    skb_cloned(skb))
 			goto slow_path;
 
-		for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+		skb_walk_frags(skb, frag) {
 			/* Correct geometry. */
 			if (frag->len > mtu ||
 			    ((frag->len & 7) && frag->next) ||
@@ -498,7 +498,6 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 
 			BUG_ON(frag->sk);
 			if (skb->sk) {
-				sock_hold(skb->sk);
 				frag->sk = skb->sk;
 				frag->destructor = sock_wfree;
 				truesizes += frag->truesize;
@@ -510,7 +509,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 		err = 0;
 		offset = 0;
 		frag = skb_shinfo(skb)->frag_list;
-		skb_shinfo(skb)->frag_list = NULL;
+		skb_frag_list_init(skb);
 		skb->data_len = first_len - skb_headlen(skb);
 		skb->truesize -= truesizes;
 		skb->len = first_len;
@@ -1294,7 +1293,7 @@ int ip_push_pending_frames(struct sock *sk)
 	 * on dst refcount
 	 */
 	inet->cork.dst = NULL;
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 
 	if (iph->protocol == IPPROTO_ICMP)
 		icmp_out_count(net, ((struct icmphdr *)
@@ -1362,7 +1361,7 @@ void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *ar
 	} replyopts;
 	struct ipcm_cookie ipc;
 	__be32 daddr;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 
 	if (ip_options_echo(&replyopts.opt, skb))
 		return;
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 43c05854d75..fc7993e9061 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -57,7 +57,7 @@
 static void ip_cmsg_recv_pktinfo(struct msghdr *msg, struct sk_buff *skb)
 {
 	struct in_pktinfo info;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 
 	info.ipi_addr.s_addr = ip_hdr(skb)->daddr;
 	if (rt) {
@@ -157,38 +157,39 @@ void ip_cmsg_recv(struct msghdr *msg, struct sk_buff *skb)
 	/* Ordered by supposed usage frequency */
 	if (flags & 1)
 		ip_cmsg_recv_pktinfo(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_ttl(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_tos(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_opts(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_retopts(msg, skb);
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 
 	if (flags & 1)
 		ip_cmsg_recv_security(msg, skb);
 
-	if ((flags>>=1) == 0)
+	if ((flags >>= 1) == 0)
 		return;
 	if (flags & 1)
 		ip_cmsg_recv_dstaddr(msg, skb);
 
 }
+EXPORT_SYMBOL(ip_cmsg_recv);
 
 int ip_cmsg_send(struct net *net, struct msghdr *msg, struct ipcm_cookie *ipc)
 {
@@ -203,7 +204,8 @@ int ip_cmsg_send(struct net *net, struct msghdr *msg, struct ipcm_cookie *ipc)
 		switch (cmsg->cmsg_type) {
 		case IP_RETOPTS:
 			err = cmsg->cmsg_len - CMSG_ALIGN(sizeof(struct cmsghdr));
-			err = ip_options_get(net, &ipc->opt, CMSG_DATA(cmsg), err < 40 ? err : 40);
+			err = ip_options_get(net, &ipc->opt, CMSG_DATA(cmsg),
+					     err < 40 ? err : 40);
 			if (err)
 				return err;
 			break;
@@ -238,7 +240,8 @@ int ip_cmsg_send(struct net *net, struct msghdr *msg, struct ipcm_cookie *ipc)
 struct ip_ra_chain *ip_ra_chain;
 DEFINE_RWLOCK(ip_ra_lock);
 
-int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *))
+int ip_ra_control(struct sock *sk, unsigned char on,
+		  void (*destructor)(struct sock *))
 {
 	struct ip_ra_chain *ra, *new_ra, **rap;
 
@@ -248,7 +251,7 @@ int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct s
 	new_ra = on ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
 
 	write_lock_bh(&ip_ra_lock);
-	for (rap = &ip_ra_chain; (ra=*rap) != NULL; rap = &ra->next) {
+	for (rap = &ip_ra_chain; (ra = *rap) != NULL; rap = &ra->next) {
 		if (ra->sk == sk) {
 			if (on) {
 				write_unlock_bh(&ip_ra_lock);
@@ -416,7 +419,8 @@ int ip_recv_error(struct sock *sk, struct msghdr *msg, int len)
 	/* Reset and regenerate socket error */
 	spin_lock_bh(&sk->sk_error_queue.lock);
 	sk->sk_err = 0;
-	if ((skb2 = skb_peek(&sk->sk_error_queue)) != NULL) {
+	skb2 = skb_peek(&sk->sk_error_queue);
+	if (skb2 != NULL) {
 		sk->sk_err = SKB_EXT_ERR(skb2)->ee.ee_errno;
 		spin_unlock_bh(&sk->sk_error_queue.lock);
 		sk->sk_error_report(sk);
@@ -431,8 +435,8 @@ out:
 
 
 /*
- *	Socket option code for IP. This is the end of the line after any TCP,UDP etc options on
- *	an IP socket.
+ *	Socket option code for IP. This is the end of the line after any
+ *	TCP,UDP etc options on an IP socket.
  */
 
 static int do_ip_setsockopt(struct sock *sk, int level,
@@ -449,6 +453,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 			     (1<<IP_ROUTER_ALERT) | (1<<IP_FREEBIND) |
 			     (1<<IP_PASSSEC) | (1<<IP_TRANSPARENT))) ||
 	    optname == IP_MULTICAST_TTL ||
+	    optname == IP_MULTICAST_ALL ||
 	    optname == IP_MULTICAST_LOOP ||
 	    optname == IP_RECVORIGDSTADDR) {
 		if (optlen >= sizeof(int)) {
@@ -474,7 +479,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	switch (optname) {
 	case IP_OPTIONS:
 	{
-		struct ip_options * opt = NULL;
+		struct ip_options *opt = NULL;
 		if (optlen > 40 || optlen < 0)
 			goto e_inval;
 		err = ip_options_get_from_user(sock_net(sk), &opt,
@@ -556,9 +561,9 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		}
 		break;
 	case IP_TTL:
-		if (optlen<1)
+		if (optlen < 1)
 			goto e_inval;
-		if (val != -1 && (val < 1 || val>255))
+		if (val != -1 && (val < 0 || val > 255))
 			goto e_inval;
 		inet->uc_ttl = val;
 		break;
@@ -570,7 +575,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		inet->hdrincl = val ? 1 : 0;
 		break;
 	case IP_MTU_DISCOVER:
-		if (val<0 || val>3)
+		if (val < 0 || val > 3)
 			goto e_inval;
 		inet->pmtudisc = val;
 		break;
@@ -582,7 +587,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	case IP_MULTICAST_TTL:
 		if (sk->sk_type == SOCK_STREAM)
 			goto e_inval;
-		if (optlen<1)
+		if (optlen < 1)
 			goto e_inval;
 		if (val == -1)
 			val = 1;
@@ -591,7 +596,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		inet->mc_ttl = val;
 		break;
 	case IP_MULTICAST_LOOP:
-		if (optlen<1)
+		if (optlen < 1)
 			goto e_inval;
 		inet->mc_loop = !!val;
 		break;
@@ -613,7 +618,8 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		} else {
 			memset(&mreq, 0, sizeof(mreq));
 			if (optlen >= sizeof(struct in_addr) &&
-			    copy_from_user(&mreq.imr_address, optval, sizeof(struct in_addr)))
+			    copy_from_user(&mreq.imr_address, optval,
+					   sizeof(struct in_addr)))
 				break;
 		}
 
@@ -677,7 +683,6 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	}
 	case IP_MSFILTER:
 	{
-		extern int sysctl_igmp_max_msf;
 		struct ip_msfilter *msf;
 
 		if (optlen < IP_MSFILTER_SIZE(0))
@@ -831,7 +836,6 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 	}
 	case MCAST_MSFILTER:
 	{
-		extern int sysctl_igmp_max_msf;
 		struct sockaddr_in *psin;
 		struct ip_msfilter *msf = NULL;
 		struct group_filter *gsf = NULL;
@@ -849,9 +853,9 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 			break;
 		}
 		err = -EFAULT;
-		if (copy_from_user(gsf, optval, optlen)) {
+		if (copy_from_user(gsf, optval, optlen))
 			goto mc_msf_out;
-		}
+
 		/* numsrc >= (4G-140)/128 overflow in 32 bits */
 		if (gsf->gf_numsrc >= 0x1ffffff ||
 		    gsf->gf_numsrc > sysctl_igmp_max_msf) {
@@ -879,7 +883,7 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		msf->imsf_fmode = gsf->gf_fmode;
 		msf->imsf_numsrc = gsf->gf_numsrc;
 		err = -EADDRNOTAVAIL;
-		for (i=0; i<gsf->gf_numsrc; ++i) {
+		for (i = 0; i < gsf->gf_numsrc; ++i) {
 			psin = (struct sockaddr_in *)&gsf->gf_slist[i];
 
 			if (psin->sin_family != AF_INET)
@@ -890,17 +894,24 @@ static int do_ip_setsockopt(struct sock *sk, int level,
 		gsf = NULL;
 
 		err = ip_mc_msfilter(sk, msf, ifindex);
-	mc_msf_out:
+mc_msf_out:
 		kfree(msf);
 		kfree(gsf);
 		break;
 	}
+	case IP_MULTICAST_ALL:
+		if (optlen < 1)
+			goto e_inval;
+		if (val != 0 && val != 1)
+			goto e_inval;
+		inet->mc_all = val;
+		break;
 	case IP_ROUTER_ALERT:
 		err = ip_ra_control(sk, val ? 1 : 0, NULL);
 		break;
 
 	case IP_FREEBIND:
-		if (optlen<1)
+		if (optlen < 1)
 			goto e_inval;
 		inet->freebind = !!val;
 		break;
@@ -957,6 +968,7 @@ int ip_setsockopt(struct sock *sk, int level,
 #endif
 	return err;
 }
+EXPORT_SYMBOL(ip_setsockopt);
 
 #ifdef CONFIG_COMPAT
 int compat_ip_setsockopt(struct sock *sk, int level, int optname,
@@ -986,13 +998,12 @@ int compat_ip_setsockopt(struct sock *sk, int level, int optname,
 #endif
 	return err;
 }
-
 EXPORT_SYMBOL(compat_ip_setsockopt);
 #endif
 
 /*
- *	Get the options. Note for future reference. The GET of IP options gets the
- *	_received_ ones. The set sets the _sent_ ones.
+ *	Get the options. Note for future reference. The GET of IP options gets
+ *	the _received_ ones. The set sets the _sent_ ones.
  */
 
 static int do_ip_getsockopt(struct sock *sk, int level, int optname,
@@ -1143,10 +1154,14 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 			return -EFAULT;
 		}
 		err = ip_mc_gsfget(sk, &gsf,
-				   (struct group_filter __user *)optval, optlen);
+				   (struct group_filter __user *)optval,
+				   optlen);
 		release_sock(sk);
 		return err;
 	}
+	case IP_MULTICAST_ALL:
+		val = inet->mc_all;
+		break;
 	case IP_PKTOPTIONS:
 	{
 		struct msghdr msg;
@@ -1187,7 +1202,7 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
 	}
 	release_sock(sk);
 
-	if (len < sizeof(int) && len > 0 && val>=0 && val<=255) {
+	if (len < sizeof(int) && len > 0 && val >= 0 && val <= 255) {
 		unsigned char ucval = (unsigned char)val;
 		len = 1;
 		if (put_user(len, optlen))
@@ -1230,6 +1245,7 @@ int ip_getsockopt(struct sock *sk, int level,
 #endif
 	return err;
 }
+EXPORT_SYMBOL(ip_getsockopt);
 
 #ifdef CONFIG_COMPAT
 int compat_ip_getsockopt(struct sock *sk, int level, int optname,
@@ -1262,11 +1278,5 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
 #endif
 	return err;
 }
-
 EXPORT_SYMBOL(compat_ip_getsockopt);
 #endif
-
-EXPORT_SYMBOL(ip_cmsg_recv);
-
-EXPORT_SYMBOL(ip_getsockopt);
-EXPORT_SYMBOL(ip_setsockopt);
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 88bf051d0cb..f8d04c25645 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -160,6 +160,9 @@ static char user_dev_name[IFNAMSIZ] __initdata = { 0, };
 /* Protocols supported by available interfaces */
 static int ic_proto_have_if __initdata = 0;
 
+/* MTU for boot device */
+static int ic_dev_mtu __initdata = 0;
+
 #ifdef IPCONFIG_DYNAMIC
 static DEFINE_SPINLOCK(ic_recv_lock);
 static volatile int ic_got_reply __initdata = 0;    /* Proto(s) that replied */
@@ -286,7 +289,7 @@ set_sockaddr(struct sockaddr_in *sin, __be32 addr, __be16 port)
 	sin->sin_port = port;
 }
 
-static int __init ic_dev_ioctl(unsigned int cmd, struct ifreq *arg)
+static int __init ic_devinet_ioctl(unsigned int cmd, struct ifreq *arg)
 {
 	int res;
 
@@ -297,6 +300,17 @@ static int __init ic_dev_ioctl(unsigned int cmd, struct ifreq *arg)
 	return res;
 }
 
+static int __init ic_dev_ioctl(unsigned int cmd, struct ifreq *arg)
+{
+	int res;
+
+	mm_segment_t oldfs = get_fs();
+	set_fs(get_ds());
+	res = dev_ioctl(&init_net, cmd, (struct ifreq __user *) arg);
+	set_fs(oldfs);
+	return res;
+}
+
 static int __init ic_route_ioctl(unsigned int cmd, struct rtentry *arg)
 {
 	int res;
@@ -321,20 +335,31 @@ static int __init ic_setup_if(void)
 	memset(&ir, 0, sizeof(ir));
 	strcpy(ir.ifr_ifrn.ifrn_name, ic_dev->name);
 	set_sockaddr(sin, ic_myaddr, 0);
-	if ((err = ic_dev_ioctl(SIOCSIFADDR, &ir)) < 0) {
+	if ((err = ic_devinet_ioctl(SIOCSIFADDR, &ir)) < 0) {
 		printk(KERN_ERR "IP-Config: Unable to set interface address (%d).\n", err);
 		return -1;
 	}
 	set_sockaddr(sin, ic_netmask, 0);
-	if ((err = ic_dev_ioctl(SIOCSIFNETMASK, &ir)) < 0) {
+	if ((err = ic_devinet_ioctl(SIOCSIFNETMASK, &ir)) < 0) {
 		printk(KERN_ERR "IP-Config: Unable to set interface netmask (%d).\n", err);
 		return -1;
 	}
 	set_sockaddr(sin, ic_myaddr | ~ic_netmask, 0);
-	if ((err = ic_dev_ioctl(SIOCSIFBRDADDR, &ir)) < 0) {
+	if ((err = ic_devinet_ioctl(SIOCSIFBRDADDR, &ir)) < 0) {
 		printk(KERN_ERR "IP-Config: Unable to set interface broadcast address (%d).\n", err);
 		return -1;
 	}
+	/* Handle the case where we need non-standard MTU on the boot link (a network
+	 * using jumbo frames, for instance).  If we can't set the mtu, don't error
+	 * out, we'll try to muddle along.
+	 */
+	if (ic_dev_mtu != 0) {
+		strcpy(ir.ifr_name, ic_dev->name);
+		ir.ifr_mtu = ic_dev_mtu;
+		if ((err = ic_dev_ioctl(SIOCSIFMTU, &ir)) < 0)
+			printk(KERN_ERR "IP-Config: Unable to set interface mtu to %d (%d).\n",
+			                 ic_dev_mtu, err);
+	}
 	return 0;
 }
 
@@ -623,6 +648,7 @@ ic_dhcp_init_options(u8 *options)
 			12,	/* Host name */
 			15,	/* Domain name */
 			17,	/* Boot path */
+			26,	/* MTU */
 			40,	/* NIS domain name */
 		};
 
@@ -798,6 +824,7 @@ static void __init ic_do_bootp_ext(u8 *ext)
 {
        u8 servers;
        int i;
+	u16 mtu;
 
 #ifdef IPCONFIG_DEBUG
 	u8 *c;
@@ -837,6 +864,10 @@ static void __init ic_do_bootp_ext(u8 *ext)
 			if (!root_server_path[0])
 				ic_bootp_string(root_server_path, ext+1, *ext, sizeof(root_server_path));
 			break;
+		case 26:	/* Interface MTU */
+			memcpy(&mtu, ext+1, sizeof(mtu));
+			ic_dev_mtu = ntohs(mtu);
+			break;
 		case 40:	/* NIS Domain name (_not_ DNS) */
 			ic_bootp_string(utsname()->domainname, ext+1, *ext, __NEW_UTS_LEN);
 			break;
@@ -1403,6 +1434,8 @@ static int __init ip_auto_config(void)
 	printk(",\n     bootserver=%pI4", &ic_servaddr);
 	printk(", rootserver=%pI4", &root_server_addr);
 	printk(", rootpath=%s", root_server_path);
+	if (ic_dev_mtu)
+		printk(", mtu=%d", ic_dev_mtu);
 	printk("\n");
 #endif /* !SILENT */
 
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 9054139795a..93e2b787da2 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -370,8 +370,7 @@ static int ipip_rcv(struct sk_buff *skb)
 		tunnel->dev->stats.rx_packets++;
 		tunnel->dev->stats.rx_bytes += skb->len;
 		skb->dev = tunnel->dev;
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 		ipip_ecn_decapsulate(iph, skb);
 		netif_rx(skb);
@@ -416,7 +415,7 @@ static int ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!dst) {
 		/* NBMA tunnel */
-		if ((rt = skb->rtable) == NULL) {
+		if ((rt = skb_rtable(skb)) == NULL) {
 			stats->tx_fifo_errors++;
 			goto tx_error;
 		}
@@ -447,15 +446,15 @@ static int ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (tiph->frag_off)
 		mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr);
 	else
-		mtu = skb->dst ? dst_mtu(skb->dst) : dev->mtu;
+		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
 	if (mtu < 68) {
 		stats->collisions++;
 		ip_rt_put(rt);
 		goto tx_error;
 	}
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	df |= (old_iph->frag_off&htons(IP_DF));
 
@@ -502,8 +501,8 @@ static int ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 	IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
 			      IPSKB_REROUTED);
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
@@ -713,6 +712,7 @@ static void ipip_tunnel_setup(struct net_device *dev)
 	dev->iflink		= 0;
 	dev->addr_len		= 4;
 	dev->features		|= NETIF_F_NETNS_LOCAL;
+	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
 }
 
 static void ipip_tunnel_init(struct net_device *dev)
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 13e9dd3012b..9a8da5ed92b 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -226,9 +226,10 @@ static void reg_vif_setup(struct net_device *dev)
 	dev->flags		= IFF_NOARP;
 	dev->netdev_ops		= &reg_vif_netdev_ops,
 	dev->destructor		= free_netdev;
+	dev->features		|= NETIF_F_NETNS_LOCAL;
 }
 
-static struct net_device *ipmr_reg_vif(void)
+static struct net_device *ipmr_reg_vif(struct net *net)
 {
 	struct net_device *dev;
 	struct in_device *in_dev;
@@ -238,6 +239,8 @@ static struct net_device *ipmr_reg_vif(void)
 	if (dev == NULL)
 		return NULL;
 
+	dev_net_set(dev, net);
+
 	if (register_netdevice(dev)) {
 		free_netdev(dev);
 		return NULL;
@@ -448,7 +451,7 @@ static int vif_add(struct net *net, struct vifctl *vifc, int mrtsock)
 		 */
 		if (net->ipv4.mroute_reg_vif_num >= 0)
 			return -EADDRINUSE;
-		dev = ipmr_reg_vif();
+		dev = ipmr_reg_vif(net);
 		if (!dev)
 			return -ENOBUFS;
 		err = dev_set_allmulti(dev, 1);
@@ -651,7 +654,7 @@ static int ipmr_cache_report(struct net *net,
 	ip_hdr(skb)->protocol = 0;			/* Flag to the kernel this is a route add */
 	msg = (struct igmpmsg *)skb_network_header(skb);
 	msg->im_vif = vifi;
-	skb->dst = dst_clone(pkt->dst);
+	skb_dst_set(skb, dst_clone(skb_dst(pkt)));
 
 	/*
 	 *	Add our header
@@ -1031,16 +1034,6 @@ int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int
 		if (v != net->ipv4.mroute_do_pim) {
 			net->ipv4.mroute_do_pim = v;
 			net->ipv4.mroute_do_assert = v;
-#ifdef CONFIG_IP_PIMSM_V2
-			if (net->ipv4.mroute_do_pim)
-				ret = inet_add_protocol(&pim_protocol,
-							IPPROTO_PIM);
-			else
-				ret = inet_del_protocol(&pim_protocol,
-							IPPROTO_PIM);
-			if (ret < 0)
-				ret = -EAGAIN;
-#endif
 		}
 		rtnl_unlock();
 		return ret;
@@ -1201,7 +1194,7 @@ static void ip_encap(struct sk_buff *skb, __be32 saddr, __be32 daddr)
 	iph->protocol	=	IPPROTO_IPIP;
 	iph->ihl	=	5;
 	iph->tot_len	=	htons(skb->len);
-	ip_select_ident(iph, skb->dst, NULL);
+	ip_select_ident(iph, skb_dst(skb), NULL);
 	ip_send_check(iph);
 
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
@@ -1212,7 +1205,7 @@ static inline int ipmr_forward_finish(struct sk_buff *skb)
 {
 	struct ip_options * opt	= &(IPCB(skb)->opt);
 
-	IP_INC_STATS_BH(dev_net(skb->dst->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
+	IP_INC_STATS_BH(dev_net(skb_dst(skb)->dev), IPSTATS_MIB_OUTFORWDATAGRAMS);
 
 	if (unlikely(opt->optlen))
 		ip_forward_options(skb);
@@ -1290,8 +1283,8 @@ static void ipmr_queue_xmit(struct sk_buff *skb, struct mfc_cache *c, int vifi)
 	vif->pkt_out++;
 	vif->bytes_out += skb->len;
 
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 	ip_decrease_ttl(ip_hdr(skb));
 
 	/* FIXME: forward and output firewalls used to be called here.
@@ -1354,7 +1347,7 @@ static int ip_mr_forward(struct sk_buff *skb, struct mfc_cache *cache, int local
 	if (net->ipv4.vif_table[vif].dev != skb->dev) {
 		int true_vifi;
 
-		if (skb->rtable->fl.iif == 0) {
+		if (skb_rtable(skb)->fl.iif == 0) {
 			/* It is our own packet, looped back.
 			   Very complicated situation...
 
@@ -1430,7 +1423,7 @@ int ip_mr_input(struct sk_buff *skb)
 {
 	struct mfc_cache *cache;
 	struct net *net = dev_net(skb->dev);
-	int local = skb->rtable->rt_flags&RTCF_LOCAL;
+	int local = skb_rtable(skb)->rt_flags & RTCF_LOCAL;
 
 	/* Packet is looped back after forward, it should not be
 	   forwarded second time, but still can be delivered locally.
@@ -1543,8 +1536,7 @@ static int __pim_rcv(struct sk_buff *skb, unsigned int pimlen)
 	skb->protocol = htons(ETH_P_IP);
 	skb->ip_summed = 0;
 	skb->pkt_type = PACKET_HOST;
-	dst_release(skb->dst);
-	skb->dst = NULL;
+	skb_dst_drop(skb);
 	reg_dev->stats.rx_bytes += skb->len;
 	reg_dev->stats.rx_packets++;
 	nf_reset(skb);
@@ -1646,7 +1638,7 @@ int ipmr_get_route(struct net *net,
 {
 	int err;
 	struct mfc_cache *cache;
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 
 	read_lock(&mrt_lock);
 	cache = ipmr_cache_find(net, rt->rt_src, rt->rt_dst);
@@ -1955,6 +1947,7 @@ static const struct file_operations ipmr_mfc_fops = {
 #ifdef CONFIG_IP_PIMSM_V2
 static struct net_protocol pim_protocol = {
 	.handler	=	pim_rcv,
+	.netns_ok	=	1,
 };
 #endif
 
@@ -2041,8 +2034,19 @@ int __init ip_mr_init(void)
 	err = register_netdevice_notifier(&ip_mr_notifier);
 	if (err)
 		goto reg_notif_fail;
+#ifdef CONFIG_IP_PIMSM_V2
+	if (inet_add_protocol(&pim_protocol, IPPROTO_PIM) < 0) {
+		printk(KERN_ERR "ip_mr_init: can't add PIM protocol\n");
+		err = -EAGAIN;
+		goto add_proto_fail;
+	}
+#endif
 	return 0;
 
+#ifdef CONFIG_IP_PIMSM_V2
+add_proto_fail:
+	unregister_netdevice_notifier(&ip_mr_notifier);
+#endif
 reg_notif_fail:
 	del_timer(&ipmr_expire_timer);
 	unregister_pernet_subsys(&ipmr_net_ops);
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index fdf6811c31a..1725dc0ef68 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -12,7 +12,7 @@
 /* route_me_harder function, used by iptable_nat, iptable_mangle + ip_queue */
 int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 {
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 	const struct iphdr *iph = ip_hdr(skb);
 	struct rtable *rt;
 	struct flowi fl = {};
@@ -41,8 +41,8 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 			return -1;
 
 		/* Drop old route. */
-		dst_release(skb->dst);
-		skb->dst = &rt->u.dst;
+		skb_dst_drop(skb);
+		skb_dst_set(skb, &rt->u.dst);
 	} else {
 		/* non-local src, find valid iif to satisfy
 		 * rp-filter when calling ip_route_input. */
@@ -50,7 +50,7 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 		if (ip_route_output_key(net, &rt, &fl) != 0)
 			return -1;
 
-		odst = skb->dst;
+		odst = skb_dst(skb);
 		if (ip_route_input(skb, iph->daddr, iph->saddr,
 				   RT_TOS(iph->tos), rt->u.dst.dev) != 0) {
 			dst_release(&rt->u.dst);
@@ -60,18 +60,22 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 		dst_release(odst);
 	}
 
-	if (skb->dst->error)
+	if (skb_dst(skb)->error)
 		return -1;
 
 #ifdef CONFIG_XFRM
 	if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
-	    xfrm_decode_session(skb, &fl, AF_INET) == 0)
-		if (xfrm_lookup(net, &skb->dst, &fl, skb->sk, 0))
+	    xfrm_decode_session(skb, &fl, AF_INET) == 0) {
+		struct dst_entry *dst = skb_dst(skb);
+		skb_dst_set(skb, NULL);
+		if (xfrm_lookup(net, &dst, &fl, skb->sk, 0))
 			return -1;
+		skb_dst_set(skb, dst);
+	}
 #endif
 
 	/* Change in oif may mean change in hh_len. */
-	hh_len = skb->dst->dev->hard_header_len;
+	hh_len = skb_dst(skb)->dev->hard_header_len;
 	if (skb_headroom(skb) < hh_len &&
 	    pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC))
 		return -1;
@@ -92,7 +96,7 @@ int ip_xfrm_me_harder(struct sk_buff *skb)
 	if (xfrm_decode_session(skb, &fl, AF_INET) < 0)
 		return -1;
 
-	dst = skb->dst;
+	dst = skb_dst(skb);
 	if (dst->xfrm)
 		dst = ((struct xfrm_dst *)dst)->route;
 	dst_hold(dst);
@@ -100,11 +104,11 @@ int ip_xfrm_me_harder(struct sk_buff *skb)
 	if (xfrm_lookup(dev_net(dst->dev), &dst, &fl, skb->sk, 0) < 0)
 		return -1;
 
-	dst_release(skb->dst);
-	skb->dst = dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, dst);
 
 	/* Change in oif may mean change in hh_len. */
-	hh_len = skb->dst->dev->hard_header_len;
+	hh_len = skb_dst(skb)->dev->hard_header_len;
 	if (skb_headroom(skb) < hh_len &&
 	    pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC))
 		return -1;
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 831fe1879dc..7505dff4ffd 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -231,6 +231,12 @@ static inline struct arpt_entry *get_entry(void *base, unsigned int offset)
 	return (struct arpt_entry *)(base + offset);
 }
 
+static inline __pure
+struct arpt_entry *arpt_next_entry(const struct arpt_entry *entry)
+{
+	return (void *)entry + entry->next_offset;
+}
+
 unsigned int arpt_do_table(struct sk_buff *skb,
 			   unsigned int hook,
 			   const struct net_device *in,
@@ -267,67 +273,64 @@ unsigned int arpt_do_table(struct sk_buff *skb,
 
 	arp = arp_hdr(skb);
 	do {
-		if (arp_packet_match(arp, skb->dev, indev, outdev, &e->arp)) {
-			struct arpt_entry_target *t;
-			int hdr_len;
-
-			hdr_len = sizeof(*arp) + (2 * sizeof(struct in_addr)) +
-				(2 * skb->dev->addr_len);
+		struct arpt_entry_target *t;
+		int hdr_len;
 
-			ADD_COUNTER(e->counters, hdr_len, 1);
+		if (!arp_packet_match(arp, skb->dev, indev, outdev, &e->arp)) {
+			e = arpt_next_entry(e);
+			continue;
+		}
 
-			t = arpt_get_target(e);
+		hdr_len = sizeof(*arp) + (2 * sizeof(struct in_addr)) +
+			(2 * skb->dev->addr_len);
+		ADD_COUNTER(e->counters, hdr_len, 1);
 
-			/* Standard target? */
-			if (!t->u.kernel.target->target) {
-				int v;
+		t = arpt_get_target(e);
 
-				v = ((struct arpt_standard_target *)t)->verdict;
-				if (v < 0) {
-					/* Pop from stack? */
-					if (v != ARPT_RETURN) {
-						verdict = (unsigned)(-v) - 1;
-						break;
-					}
-					e = back;
-					back = get_entry(table_base,
-							 back->comefrom);
-					continue;
-				}
-				if (table_base + v
-				    != (void *)e + e->next_offset) {
-					/* Save old back ptr in next entry */
-					struct arpt_entry *next
-						= (void *)e + e->next_offset;
-					next->comefrom =
-						(void *)back - table_base;
-
-					/* set back pointer to next entry */
-					back = next;
-				}
+		/* Standard target? */
+		if (!t->u.kernel.target->target) {
+			int v;
 
-				e = get_entry(table_base, v);
-			} else {
-				/* Targets which reenter must return
-				 * abs. verdicts
-				 */
-				tgpar.target   = t->u.kernel.target;
-				tgpar.targinfo = t->data;
-				verdict = t->u.kernel.target->target(skb,
-								     &tgpar);
-
-				/* Target might have changed stuff. */
-				arp = arp_hdr(skb);
-
-				if (verdict == ARPT_CONTINUE)
-					e = (void *)e + e->next_offset;
-				else
-					/* Verdict */
+			v = ((struct arpt_standard_target *)t)->verdict;
+			if (v < 0) {
+				/* Pop from stack? */
+				if (v != ARPT_RETURN) {
+					verdict = (unsigned)(-v) - 1;
 					break;
+				}
+				e = back;
+				back = get_entry(table_base, back->comefrom);
+				continue;
 			}
-		} else {
-			e = (void *)e + e->next_offset;
+			if (table_base + v
+			    != arpt_next_entry(e)) {
+				/* Save old back ptr in next entry */
+				struct arpt_entry *next = arpt_next_entry(e);
+				next->comefrom = (void *)back - table_base;
+
+				/* set back pointer to next entry */
+				back = next;
+			}
+
+			e = get_entry(table_base, v);
+			continue;
 		}
+
+		/* Targets which reenter must return
+		 * abs. verdicts
+		 */
+		tgpar.target   = t->u.kernel.target;
+		tgpar.targinfo = t->data;
+		verdict = t->u.kernel.target->target(skb, &tgpar);
+
+		/* Target might have changed stuff. */
+		arp = arp_hdr(skb);
+
+		if (verdict == ARPT_CONTINUE)
+			e = arpt_next_entry(e);
+		else
+			/* Verdict */
+			break;
 	} while (!hotdrop);
 	xt_info_rdunlock_bh();
 
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index 5f22c91c6e1..c156db21598 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -596,7 +596,7 @@ static int __init ip_queue_init(void)
 #ifdef CONFIG_SYSCTL
 	ipq_sysctl_header = register_sysctl_paths(net_ipv4_ctl_path, ipq_table);
 #endif
-	status = nf_register_queue_handler(PF_INET, &nfqh);
+	status = nf_register_queue_handler(NFPROTO_IPV4, &nfqh);
 	if (status < 0) {
 		printk(KERN_ERR "ip_queue: failed to register queue handler\n");
 		goto cleanup_sysctl;
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index 2ec8d7290c4..fdefae6b5df 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -238,8 +238,8 @@ static struct nf_loginfo trace_loginfo = {
 /* Mildly perf critical (only if packet tracing is on) */
 static inline int
 get_chainname_rulenum(struct ipt_entry *s, struct ipt_entry *e,
-		      char *hookname, char **chainname,
-		      char **comment, unsigned int *rulenum)
+		      const char *hookname, const char **chainname,
+		      const char **comment, unsigned int *rulenum)
 {
 	struct ipt_standard_target *t = (void *)ipt_get_target(s);
 
@@ -257,8 +257,8 @@ get_chainname_rulenum(struct ipt_entry *s, struct ipt_entry *e,
 		   && unconditional(&s->ip)) {
 			/* Tail of chains: STANDARD target (return/policy) */
 			*comment = *chainname == hookname
-				? (char *)comments[NF_IP_TRACE_COMMENT_POLICY]
-				: (char *)comments[NF_IP_TRACE_COMMENT_RETURN];
+				? comments[NF_IP_TRACE_COMMENT_POLICY]
+				: comments[NF_IP_TRACE_COMMENT_RETURN];
 		}
 		return 1;
 	} else
@@ -277,14 +277,14 @@ static void trace_packet(struct sk_buff *skb,
 {
 	void *table_base;
 	const struct ipt_entry *root;
-	char *hookname, *chainname, *comment;
+	const char *hookname, *chainname, *comment;
 	unsigned int rulenum = 0;
 
-	table_base = (void *)private->entries[smp_processor_id()];
+	table_base = private->entries[smp_processor_id()];
 	root = get_entry(table_base, private->hook_entry[hook]);
 
-	hookname = chainname = (char *)hooknames[hook];
-	comment = (char *)comments[NF_IP_TRACE_COMMENT_RULE];
+	hookname = chainname = hooknames[hook];
+	comment = comments[NF_IP_TRACE_COMMENT_RULE];
 
 	IPT_ENTRY_ITERATE(root,
 			  private->size - private->hook_entry[hook],
@@ -297,6 +297,12 @@ static void trace_packet(struct sk_buff *skb,
 }
 #endif
 
+static inline __pure
+struct ipt_entry *ipt_next_entry(const struct ipt_entry *entry)
+{
+	return (void *)entry + entry->next_offset;
+}
+
 /* Returns one of the generic firewall policies, like NF_ACCEPT. */
 unsigned int
 ipt_do_table(struct sk_buff *skb,
@@ -305,6 +311,8 @@ ipt_do_table(struct sk_buff *skb,
 	     const struct net_device *out,
 	     struct xt_table *table)
 {
+#define tb_comefrom ((struct ipt_entry *)table_base)->comefrom
+
 	static const char nulldevname[IFNAMSIZ] __attribute__((aligned(sizeof(long))));
 	const struct iphdr *ip;
 	u_int16_t datalen;
@@ -335,7 +343,7 @@ ipt_do_table(struct sk_buff *skb,
 	mtpar.in      = tgpar.in  = in;
 	mtpar.out     = tgpar.out = out;
 	mtpar.family  = tgpar.family = NFPROTO_IPV4;
-	tgpar.hooknum = hook;
+	mtpar.hooknum = tgpar.hooknum = hook;
 
 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
 	xt_info_rdlock_bh();
@@ -348,92 +356,84 @@ ipt_do_table(struct sk_buff *skb,
 	back = get_entry(table_base, private->underflow[hook]);
 
 	do {
+		struct ipt_entry_target *t;
+
 		IP_NF_ASSERT(e);
 		IP_NF_ASSERT(back);
-		if (ip_packet_match(ip, indev, outdev,
-		    &e->ip, mtpar.fragoff)) {
-			struct ipt_entry_target *t;
-
-			if (IPT_MATCH_ITERATE(e, do_match, skb, &mtpar) != 0)
-				goto no_match;
+		if (!ip_packet_match(ip, indev, outdev,
+		    &e->ip, mtpar.fragoff) ||
+		    IPT_MATCH_ITERATE(e, do_match, skb, &mtpar) != 0) {
+			e = ipt_next_entry(e);
+			continue;
+		}
 
-			ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
+		ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
 
-			t = ipt_get_target(e);
-			IP_NF_ASSERT(t->u.kernel.target);
+		t = ipt_get_target(e);
+		IP_NF_ASSERT(t->u.kernel.target);
 
 #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
     defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
-			/* The packet is traced: log it */
-			if (unlikely(skb->nf_trace))
-				trace_packet(skb, hook, in, out,
-					     table->name, private, e);
+		/* The packet is traced: log it */
+		if (unlikely(skb->nf_trace))
+			trace_packet(skb, hook, in, out,
+				     table->name, private, e);
 #endif
-			/* Standard target? */
-			if (!t->u.kernel.target->target) {
-				int v;
-
-				v = ((struct ipt_standard_target *)t)->verdict;
-				if (v < 0) {
-					/* Pop from stack? */
-					if (v != IPT_RETURN) {
-						verdict = (unsigned)(-v) - 1;
-						break;
-					}
-					e = back;
-					back = get_entry(table_base,
-							 back->comefrom);
-					continue;
-				}
-				if (table_base + v != (void *)e + e->next_offset
-				    && !(e->ip.flags & IPT_F_GOTO)) {
-					/* Save old back ptr in next entry */
-					struct ipt_entry *next
-						= (void *)e + e->next_offset;
-					next->comefrom
-						= (void *)back - table_base;
-					/* set back pointer to next entry */
-					back = next;
+		/* Standard target? */
+		if (!t->u.kernel.target->target) {
+			int v;
+
+			v = ((struct ipt_standard_target *)t)->verdict;
+			if (v < 0) {
+				/* Pop from stack? */
+				if (v != IPT_RETURN) {
+					verdict = (unsigned)(-v) - 1;
+					break;
 				}
+				e = back;
+				back = get_entry(table_base, back->comefrom);
+				continue;
+			}
+			if (table_base + v != ipt_next_entry(e)
+			    && !(e->ip.flags & IPT_F_GOTO)) {
+				/* Save old back ptr in next entry */
+				struct ipt_entry *next = ipt_next_entry(e);
+				next->comefrom = (void *)back - table_base;
+				/* set back pointer to next entry */
+				back = next;
+			}
+
+			e = get_entry(table_base, v);
+			continue;
+		}
+
+		/* Targets which reenter must return
+		   abs. verdicts */
+		tgpar.target   = t->u.kernel.target;
+		tgpar.targinfo = t->data;
+
 
-				e = get_entry(table_base, v);
-			} else {
-				/* Targets which reenter must return
-				   abs. verdicts */
-				tgpar.target   = t->u.kernel.target;
-				tgpar.targinfo = t->data;
 #ifdef CONFIG_NETFILTER_DEBUG
-				((struct ipt_entry *)table_base)->comefrom
-					= 0xeeeeeeec;
+		tb_comefrom = 0xeeeeeeec;
 #endif
-				verdict = t->u.kernel.target->target(skb,
-								     &tgpar);
+		verdict = t->u.kernel.target->target(skb, &tgpar);
 #ifdef CONFIG_NETFILTER_DEBUG
-				if (((struct ipt_entry *)table_base)->comefrom
-				    != 0xeeeeeeec
-				    && verdict == IPT_CONTINUE) {
-					printk("Target %s reentered!\n",
-					       t->u.kernel.target->name);
-					verdict = NF_DROP;
-				}
-				((struct ipt_entry *)table_base)->comefrom
-					= 0x57acc001;
+		if (tb_comefrom != 0xeeeeeeec && verdict == IPT_CONTINUE) {
+			printk("Target %s reentered!\n",
+			       t->u.kernel.target->name);
+			verdict = NF_DROP;
+		}
+		tb_comefrom = 0x57acc001;
 #endif
-				/* Target might have changed stuff. */
-				ip = ip_hdr(skb);
-				datalen = skb->len - ip->ihl * 4;
-
-				if (verdict == IPT_CONTINUE)
-					e = (void *)e + e->next_offset;
-				else
-					/* Verdict */
-					break;
-			}
-		} else {
+		/* Target might have changed stuff. */
+		ip = ip_hdr(skb);
+		datalen = skb->len - ip->ihl * 4;
 
-		no_match:
-			e = (void *)e + e->next_offset;
-		}
+		if (verdict == IPT_CONTINUE)
+			e = ipt_next_entry(e);
+		else
+			/* Verdict */
+			break;
 	} while (!hotdrop);
 	xt_info_rdunlock_bh();
 
@@ -444,6 +444,8 @@ ipt_do_table(struct sk_buff *skb,
 		return NF_DROP;
 	else return verdict;
 #endif
+
+#undef tb_comefrom
 }
 
 /* Figures out from what hook each rule can be called: returns 0 if
@@ -2158,7 +2160,7 @@ static bool icmp_checkentry(const struct xt_mtchk_param *par)
 static struct xt_target ipt_standard_target __read_mostly = {
 	.name		= IPT_STANDARD_TARGET,
 	.targetsize	= sizeof(int),
-	.family		= AF_INET,
+	.family		= NFPROTO_IPV4,
 #ifdef CONFIG_COMPAT
 	.compatsize	= sizeof(compat_int_t),
 	.compat_from_user = compat_standard_from_user,
@@ -2170,7 +2172,7 @@ static struct xt_target ipt_error_target __read_mostly = {
 	.name		= IPT_ERROR_TARGET,
 	.target		= ipt_error,
 	.targetsize	= IPT_FUNCTION_MAXNAMELEN,
-	.family		= AF_INET,
+	.family		= NFPROTO_IPV4,
 };
 
 static struct nf_sockopt_ops ipt_sockopts = {
@@ -2196,17 +2198,17 @@ static struct xt_match icmp_matchstruct __read_mostly = {
 	.matchsize	= sizeof(struct ipt_icmp),
 	.checkentry	= icmp_checkentry,
 	.proto		= IPPROTO_ICMP,
-	.family		= AF_INET,
+	.family		= NFPROTO_IPV4,
 };
 
 static int __net_init ip_tables_net_init(struct net *net)
 {
-	return xt_proto_init(net, AF_INET);
+	return xt_proto_init(net, NFPROTO_IPV4);
 }
 
 static void __net_exit ip_tables_net_exit(struct net *net)
 {
-	xt_proto_fini(net, AF_INET);
+	xt_proto_fini(net, NFPROTO_IPV4);
 }
 
 static struct pernet_operations ip_tables_net_ops = {
diff --git a/net/ipv4/netfilter/ipt_MASQUERADE.c b/net/ipv4/netfilter/ipt_MASQUERADE.c
index f389f60cb10..dada0863946 100644
--- a/net/ipv4/netfilter/ipt_MASQUERADE.c
+++ b/net/ipv4/netfilter/ipt_MASQUERADE.c
@@ -27,9 +27,6 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
 MODULE_DESCRIPTION("Xtables: automatic-address SNAT");
 
-/* Lock protects masq region inside conntrack */
-static DEFINE_RWLOCK(masq_lock);
-
 /* FIXME: Multiple targets. --RR */
 static bool masquerade_tg_check(const struct xt_tgchk_param *par)
 {
@@ -72,16 +69,14 @@ masquerade_tg(struct sk_buff *skb, const struct xt_target_param *par)
 		return NF_ACCEPT;
 
 	mr = par->targinfo;
-	rt = skb->rtable;
+	rt = skb_rtable(skb);
 	newsrc = inet_select_addr(par->out, rt->rt_gateway, RT_SCOPE_UNIVERSE);
 	if (!newsrc) {
 		printk("MASQUERADE: %s ate my IP address\n", par->out->name);
 		return NF_DROP;
 	}
 
-	write_lock_bh(&masq_lock);
 	nat->masq_index = par->out->ifindex;
-	write_unlock_bh(&masq_lock);
 
 	/* Transfer from original range. */
 	newrange = ((struct nf_nat_range)
@@ -97,16 +92,11 @@ static int
 device_cmp(struct nf_conn *i, void *ifindex)
 {
 	const struct nf_conn_nat *nat = nfct_nat(i);
-	int ret;
 
 	if (!nat)
 		return 0;
 
-	read_lock_bh(&masq_lock);
-	ret = (nat->masq_index == (int)(long)ifindex);
-	read_unlock_bh(&masq_lock);
-
-	return ret;
+	return nat->masq_index == (int)(long)ifindex;
 }
 
 static int masq_device_event(struct notifier_block *this,
diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c
index 0b4b6e0ff2b..c93ae44bff2 100644
--- a/net/ipv4/netfilter/ipt_REJECT.c
+++ b/net/ipv4/netfilter/ipt_REJECT.c
@@ -108,17 +108,16 @@ static void send_reset(struct sk_buff *oldskb, int hook)
 		addr_type = RTN_LOCAL;
 
 	/* ip_route_me_harder expects skb->dst to be set */
-	dst_hold(oldskb->dst);
-	nskb->dst = oldskb->dst;
+	skb_dst_set(nskb, dst_clone(skb_dst(oldskb)));
 
 	if (ip_route_me_harder(nskb, addr_type))
 		goto free_nskb;
 
-	niph->ttl	= dst_metric(nskb->dst, RTAX_HOPLIMIT);
+	niph->ttl	= dst_metric(skb_dst(nskb), RTAX_HOPLIMIT);
 	nskb->ip_summed = CHECKSUM_NONE;
 
 	/* "Never happens" */
-	if (nskb->len > dst_mtu(nskb->dst))
+	if (nskb->len > dst_mtu(skb_dst(nskb)))
 		goto free_nskb;
 
 	nf_ct_attach(nskb, oldskb);
diff --git a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
index 23b2c2ee869..d71ba767734 100644
--- a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
@@ -82,18 +82,10 @@ static int icmp_packet(struct nf_conn *ct,
 		       u_int8_t pf,
 		       unsigned int hooknum)
 {
-	/* Try to delete connection immediately after all replies:
-	   won't actually vanish as we still have skb, and del_timer
-	   means this will only run once even if count hits zero twice
-	   (theoretically possible with SMP) */
-	if (CTINFO2DIR(ctinfo) == IP_CT_DIR_REPLY) {
-		if (atomic_dec_and_test(&ct->proto.icmp.count))
-			nf_ct_kill_acct(ct, ctinfo, skb);
-	} else {
-		atomic_inc(&ct->proto.icmp.count);
-		nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, ct);
-		nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_icmp_timeout);
-	}
+	/* Do not immediately delete the connection after the first
+	   successful reply to avoid excessive conntrackd traffic
+	   and also to handle correctly ICMP echo reply duplicates. */
+	nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_icmp_timeout);
 
 	return NF_ACCEPT;
 }
@@ -117,7 +109,6 @@ static bool icmp_new(struct nf_conn *ct, const struct sk_buff *skb,
 		nf_ct_dump_tuple_ip(&ct->tuplehash[0].tuple);
 		return false;
 	}
-	atomic_set(&ct->proto.icmp.count, 0);
 	return true;
 }
 
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index cf7a42bf982..155c008626c 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -140,7 +140,7 @@ nf_nat_mangle_tcp_packet(struct sk_buff *skb,
 			 const char *rep_buffer,
 			 unsigned int rep_len)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct iphdr *iph;
 	struct tcphdr *tcph;
 	int oldlen, datalen;
@@ -218,7 +218,7 @@ nf_nat_mangle_udp_packet(struct sk_buff *skb,
 			 const char *rep_buffer,
 			 unsigned int rep_len)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct iphdr *iph;
 	struct udphdr *udph;
 	int datalen, oldlen;
diff --git a/net/ipv4/netfilter/nf_nat_proto_sctp.c b/net/ipv4/netfilter/nf_nat_proto_sctp.c
index 65e470bc612..3fc598eeeb1 100644
--- a/net/ipv4/netfilter/nf_nat_proto_sctp.c
+++ b/net/ipv4/netfilter/nf_nat_proto_sctp.c
@@ -33,6 +33,7 @@ sctp_manip_pkt(struct sk_buff *skb,
 	       enum nf_nat_manip_type maniptype)
 {
 	const struct iphdr *iph = (struct iphdr *)(skb->data + iphdroff);
+	struct sk_buff *frag;
 	sctp_sctphdr_t *hdr;
 	unsigned int hdroff = iphdroff + iph->ihl*4;
 	__be32 oldip, newip;
@@ -57,8 +58,8 @@ sctp_manip_pkt(struct sk_buff *skb,
 	}
 
 	crc32 = sctp_start_cksum((u8 *)hdr, skb_headlen(skb) - hdroff);
-	for (skb = skb_shinfo(skb)->frag_list; skb; skb = skb->next)
-		crc32 = sctp_update_cksum((u8 *)skb->data, skb_headlen(skb),
+	skb_walk_frags(skb, frag)
+		crc32 = sctp_update_cksum((u8 *)frag->data, skb_headlen(frag),
 					  crc32);
 	crc32 = sctp_end_cksum(crc32);
 	hdr->checksum = crc32;
diff --git a/net/ipv4/netfilter/nf_nat_standalone.c b/net/ipv4/netfilter/nf_nat_standalone.c
index b7dd695691a..5567bd0d075 100644
--- a/net/ipv4/netfilter/nf_nat_standalone.c
+++ b/net/ipv4/netfilter/nf_nat_standalone.c
@@ -167,10 +167,9 @@ nf_nat_in(unsigned int hooknum,
 
 	ret = nf_nat_fn(hooknum, skb, in, out, okfn);
 	if (ret != NF_DROP && ret != NF_STOLEN &&
-	    daddr != ip_hdr(skb)->daddr) {
-		dst_release(skb->dst);
-		skb->dst = NULL;
-	}
+	    daddr != ip_hdr(skb)->daddr)
+		skb_dst_drop(skb);
+
 	return ret;
 }
 
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index cf0cdeeb1db..f25542c48b7 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -90,14 +90,14 @@ static const struct file_operations sockstat_seq_fops = {
 
 /* snmp items */
 static const struct snmp_mib snmp4_ipstats_list[] = {
-	SNMP_MIB_ITEM("InReceives", IPSTATS_MIB_INRECEIVES),
+	SNMP_MIB_ITEM("InReceives", IPSTATS_MIB_INPKTS),
 	SNMP_MIB_ITEM("InHdrErrors", IPSTATS_MIB_INHDRERRORS),
 	SNMP_MIB_ITEM("InAddrErrors", IPSTATS_MIB_INADDRERRORS),
 	SNMP_MIB_ITEM("ForwDatagrams", IPSTATS_MIB_OUTFORWDATAGRAMS),
 	SNMP_MIB_ITEM("InUnknownProtos", IPSTATS_MIB_INUNKNOWNPROTOS),
 	SNMP_MIB_ITEM("InDiscards", IPSTATS_MIB_INDISCARDS),
 	SNMP_MIB_ITEM("InDelivers", IPSTATS_MIB_INDELIVERS),
-	SNMP_MIB_ITEM("OutRequests", IPSTATS_MIB_OUTREQUESTS),
+	SNMP_MIB_ITEM("OutRequests", IPSTATS_MIB_OUTPKTS),
 	SNMP_MIB_ITEM("OutDiscards", IPSTATS_MIB_OUTDISCARDS),
 	SNMP_MIB_ITEM("OutNoRoutes", IPSTATS_MIB_OUTNOROUTES),
 	SNMP_MIB_ITEM("ReasmTimeout", IPSTATS_MIB_REASMTIMEOUT),
@@ -118,6 +118,12 @@ static const struct snmp_mib snmp4_ipextstats_list[] = {
 	SNMP_MIB_ITEM("OutMcastPkts", IPSTATS_MIB_OUTMCASTPKTS),
 	SNMP_MIB_ITEM("InBcastPkts", IPSTATS_MIB_INBCASTPKTS),
 	SNMP_MIB_ITEM("OutBcastPkts", IPSTATS_MIB_OUTBCASTPKTS),
+	SNMP_MIB_ITEM("InOctets", IPSTATS_MIB_INOCTETS),
+	SNMP_MIB_ITEM("OutOctets", IPSTATS_MIB_OUTOCTETS),
+	SNMP_MIB_ITEM("InMcastOctets", IPSTATS_MIB_INMCASTOCTETS),
+	SNMP_MIB_ITEM("OutMcastOctets", IPSTATS_MIB_OUTMCASTOCTETS),
+	SNMP_MIB_ITEM("InBcastOctets", IPSTATS_MIB_INBCASTOCTETS),
+	SNMP_MIB_ITEM("OutBcastOctets", IPSTATS_MIB_OUTBCASTOCTETS),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index f774651f0a4..3dc9171a272 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -343,7 +343,7 @@ static int raw_send_hdrinc(struct sock *sk, void *from, size_t length,
 
 	skb->priority = sk->sk_priority;
 	skb->mark = sk->sk_mark;
-	skb->dst = dst_clone(&rt->u.dst);
+	skb_dst_set(skb, dst_clone(&rt->u.dst));
 
 	skb_reset_network_header(skb);
 	iph = ip_hdr(skb);
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 28205e5bfa9..cd76b3cb709 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -131,8 +131,8 @@ static int ip_rt_min_advmss __read_mostly	= 256;
 static int ip_rt_secret_interval __read_mostly	= 10 * 60 * HZ;
 static int rt_chain_length_max __read_mostly	= 20;
 
-static void rt_worker_func(struct work_struct *work);
-static DECLARE_DELAYED_WORK(expires_work, rt_worker_func);
+static struct delayed_work expires_work;
+static unsigned long expires_ljiffies;
 
 /*
  *	Interface to generic destination cache.
@@ -787,9 +787,12 @@ static void rt_check_expire(void)
 	struct rtable *rth, *aux, **rthp;
 	unsigned long samples = 0;
 	unsigned long sum = 0, sum2 = 0;
+	unsigned long delta;
 	u64 mult;
 
-	mult = ((u64)ip_rt_gc_interval) << rt_hash_log;
+	delta = jiffies - expires_ljiffies;
+	expires_ljiffies = jiffies;
+	mult = ((u64)delta) << rt_hash_log;
 	if (ip_rt_gc_timeout > 1)
 		do_div(mult, ip_rt_gc_timeout);
 	goal = (unsigned int)mult;
@@ -1064,7 +1067,8 @@ work_done:
 out:	return 0;
 }
 
-static int rt_intern_hash(unsigned hash, struct rtable *rt, struct rtable **rp)
+static int rt_intern_hash(unsigned hash, struct rtable *rt,
+			  struct rtable **rp, struct sk_buff *skb)
 {
 	struct rtable	*rth, **rthp;
 	unsigned long	now;
@@ -1114,7 +1118,10 @@ restart:
 			spin_unlock_bh(rt_hash_lock_addr(hash));
 
 			rt_drop(rt);
-			*rp = rth;
+			if (rp)
+				*rp = rth;
+			else
+				skb_dst_set(skb, &rth->u.dst);
 			return 0;
 		}
 
@@ -1210,7 +1217,10 @@ restart:
 	rcu_assign_pointer(rt_hash_table[hash].chain, rt);
 
 	spin_unlock_bh(rt_hash_lock_addr(hash));
-	*rp = rt;
+	if (rp)
+		*rp = rt;
+	else
+		skb_dst_set(skb, &rt->u.dst);
 	return 0;
 }
 
@@ -1407,7 +1417,7 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw,
 							&netevent);
 
 				rt_del(hash, rth);
-				if (!rt_intern_hash(hash, rt, &rt))
+				if (!rt_intern_hash(hash, rt, &rt, NULL))
 					ip_rt_put(rt);
 				goto do_next;
 			}
@@ -1473,7 +1483,7 @@ static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst)
 
 void ip_rt_send_redirect(struct sk_buff *skb)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct in_device *in_dev = in_dev_get(rt->u.dst.dev);
 
 	if (!in_dev)
@@ -1521,7 +1531,7 @@ out:
 
 static int ip_error(struct sk_buff *skb)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	unsigned long now;
 	int code;
 
@@ -1698,7 +1708,7 @@ static void ipv4_link_failure(struct sk_buff *skb)
 
 	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
 
-	rt = skb->rtable;
+	rt = skb_rtable(skb);
 	if (rt)
 		dst_set_expires(&rt->u.dst, 0);
 }
@@ -1858,7 +1868,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 
 	in_dev_put(in_dev);
 	hash = rt_hash(daddr, saddr, dev->ifindex, rt_genid(dev_net(dev)));
-	return rt_intern_hash(hash, rth, &skb->rtable);
+	return rt_intern_hash(hash, rth, NULL, skb);
 
 e_nobufs:
 	in_dev_put(in_dev);
@@ -2019,7 +2029,7 @@ static int ip_mkroute_input(struct sk_buff *skb,
 	/* put it into the cache */
 	hash = rt_hash(daddr, saddr, fl->iif,
 		       rt_genid(dev_net(rth->u.dst.dev)));
-	return rt_intern_hash(hash, rth, &skb->rtable);
+	return rt_intern_hash(hash, rth, NULL, skb);
 }
 
 /*
@@ -2175,7 +2185,7 @@ local_input:
 	}
 	rth->rt_type	= res.type;
 	hash = rt_hash(daddr, saddr, fl.iif, rt_genid(net));
-	err = rt_intern_hash(hash, rth, &skb->rtable);
+	err = rt_intern_hash(hash, rth, NULL, skb);
 	goto done;
 
 no_route:
@@ -2244,7 +2254,7 @@ int ip_route_input(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 			dst_use(&rth->u.dst, jiffies);
 			RT_CACHE_STAT_INC(in_hit);
 			rcu_read_unlock();
-			skb->rtable = rth;
+			skb_dst_set(skb, &rth->u.dst);
 			return 0;
 		}
 		RT_CACHE_STAT_INC(in_hlist_search);
@@ -2420,7 +2430,7 @@ static int ip_mkroute_output(struct rtable **rp,
 	if (err == 0) {
 		hash = rt_hash(oldflp->fl4_dst, oldflp->fl4_src, oldflp->oif,
 			       rt_genid(dev_net(dev_out)));
-		err = rt_intern_hash(hash, rth, rp);
+		err = rt_intern_hash(hash, rth, rp, NULL);
 	}
 
 	return err;
@@ -2763,7 +2773,7 @@ static int rt_fill_info(struct net *net,
 			struct sk_buff *skb, u32 pid, u32 seq, int event,
 			int nowait, unsigned int flags)
 {
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct rtmsg *r;
 	struct nlmsghdr *nlh;
 	long expires;
@@ -2907,7 +2917,7 @@ static int inet_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 		err = ip_route_input(skb, dst, src, rtm->rtm_tos, dev);
 		local_bh_enable();
 
-		rt = skb->rtable;
+		rt = skb_rtable(skb);
 		if (err == 0 && rt->u.dst.error)
 			err = -rt->u.dst.error;
 	} else {
@@ -2927,7 +2937,7 @@ static int inet_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 	if (err)
 		goto errout_free;
 
-	skb->rtable = rt;
+	skb_dst_set(skb, &rt->u.dst);
 	if (rtm->rtm_flags & RTM_F_NOTIFY)
 		rt->rt_flags |= RTCF_NOTIFY;
 
@@ -2968,15 +2978,15 @@ int ip_rt_dump(struct sk_buff *skb,  struct netlink_callback *cb)
 				continue;
 			if (rt_is_expired(rt))
 				continue;
-			skb->dst = dst_clone(&rt->u.dst);
+			skb_dst_set(skb, dst_clone(&rt->u.dst));
 			if (rt_fill_info(net, skb, NETLINK_CB(cb->skb).pid,
 					 cb->nlh->nlmsg_seq, RTM_NEWROUTE,
 					 1, NLM_F_MULTI) <= 0) {
-				dst_release(xchg(&skb->dst, NULL));
+				skb_dst_drop(skb);
 				rcu_read_unlock_bh();
 				goto done;
 			}
-			dst_release(xchg(&skb->dst, NULL));
+			skb_dst_drop(skb);
 		}
 		rcu_read_unlock_bh();
 	}
@@ -3390,6 +3400,8 @@ int __init ip_rt_init(void)
 	/* All the timers, started at system startup tend
 	   to synchronize. Perturb it a bit.
 	 */
+	INIT_DELAYED_WORK_DEFERRABLE(&expires_work, rt_worker_func);
+	expires_ljiffies = jiffies;
 	schedule_delayed_work(&expires_work,
 		net_random() % ip_rt_gc_interval + ip_rt_gc_interval);
 
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index b35a950d2e0..cd2b97f1b6e 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -161,13 +161,12 @@ static __u16 const msstab[] = {
  */
 __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mssp)
 {
-	struct tcp_sock *tp = tcp_sk(sk);
 	const struct iphdr *iph = ip_hdr(skb);
 	const struct tcphdr *th = tcp_hdr(skb);
 	int mssind;
 	const __u16 mss = *mssp;
 
-	tp->last_synq_overflow = jiffies;
+	tcp_synq_overflow(sk);
 
 	/* XXX sort msstab[] by probability?  Binary search? */
 	for (mssind = 0; mss > msstab[mssind + 1]; mssind++)
@@ -268,7 +267,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
 	if (!sysctl_tcp_syncookies || !th->ack)
 		goto out;
 
-	if (time_after(jiffies, tp->last_synq_overflow + TCP_TIMEOUT_INIT) ||
+	if (tcp_synq_no_recent_overflow(sk) ||
 	    (mss = cookie_check(skb, cookie)) == 0) {
 		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_SYNCOOKIESFAILED);
 		goto out;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 7a0f0b27bf1..17b89c523f9 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -439,12 +439,14 @@ int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg)
 			 !tp->urg_data ||
 			 before(tp->urg_seq, tp->copied_seq) ||
 			 !before(tp->urg_seq, tp->rcv_nxt)) {
+			struct sk_buff *skb;
+
 			answ = tp->rcv_nxt - tp->copied_seq;
 
 			/* Subtract 1, if FIN is in queue. */
-			if (answ && !skb_queue_empty(&sk->sk_receive_queue))
-				answ -=
-		       tcp_hdr((struct sk_buff *)sk->sk_receive_queue.prev)->fin;
+			skb = skb_peek_tail(&sk->sk_receive_queue);
+			if (answ && skb)
+				answ -= tcp_hdr(skb)->fin;
 		} else
 			answ = tp->urg_seq - tp->copied_seq;
 		release_sock(sk);
@@ -1382,11 +1384,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 
 		/* Next get a buffer. */
 
-		skb = skb_peek(&sk->sk_receive_queue);
-		do {
-			if (!skb)
-				break;
-
+		skb_queue_walk(&sk->sk_receive_queue, skb) {
 			/* Now that we have two receive queues this
 			 * shouldn't happen.
 			 */
@@ -1403,8 +1401,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 			if (tcp_hdr(skb)->fin)
 				goto found_fin_ok;
 			WARN_ON(!(flags & MSG_PEEK));
-			skb = skb->next;
-		} while (skb != (struct sk_buff *)&sk->sk_receive_queue);
+		}
 
 		/* Well, if we have backlog, try to process it now yet. */
 
@@ -2518,20 +2515,30 @@ struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 	unsigned int thlen;
 	unsigned int flags;
 	unsigned int mss = 1;
+	unsigned int hlen;
+	unsigned int off;
 	int flush = 1;
 	int i;
 
-	th = skb_gro_header(skb, sizeof(*th));
-	if (unlikely(!th))
-		goto out;
+	off = skb_gro_offset(skb);
+	hlen = off + sizeof(*th);
+	th = skb_gro_header_fast(skb, off);
+	if (skb_gro_header_hard(skb, hlen)) {
+		th = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!th))
+			goto out;
+	}
 
 	thlen = th->doff * 4;
 	if (thlen < sizeof(*th))
 		goto out;
 
-	th = skb_gro_header(skb, thlen);
-	if (unlikely(!th))
-		goto out;
+	hlen = off + thlen;
+	if (skb_gro_header_hard(skb, hlen)) {
+		th = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!th))
+			goto out;
+	}
 
 	skb_gro_pull(skb, thlen);
 
@@ -2544,7 +2551,7 @@ struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 
 		th2 = tcp_hdr(p);
 
-		if ((th->source ^ th2->source) | (th->dest ^ th2->dest)) {
+		if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
 			NAPI_GRO_CB(p)->same_flow = 0;
 			continue;
 		}
@@ -2559,14 +2566,14 @@ found:
 	flush |= flags & TCP_FLAG_CWR;
 	flush |= (flags ^ tcp_flag_word(th2)) &
 		  ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH);
-	flush |= (th->ack_seq ^ th2->ack_seq) | (th->window ^ th2->window);
-	for (i = sizeof(*th); !flush && i < thlen; i += 4)
+	flush |= th->ack_seq ^ th2->ack_seq;
+	for (i = sizeof(*th); i < thlen; i += 4)
 		flush |= *(u32 *)((u8 *)th + i) ^
 			 *(u32 *)((u8 *)th2 + i);
 
 	mss = skb_shinfo(p)->gso_size;
 
-	flush |= (len > mss) | !len;
+	flush |= (len - 1) >= mss;
 	flush |= (ntohl(th2->seq) + skb_gro_len(p)) ^ ntohl(th->seq);
 
 	if (flush || skb_gro_receive(head, skb)) {
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index eec3e6f9956..2bdb0da237e 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -77,7 +77,7 @@ int sysctl_tcp_window_scaling __read_mostly = 1;
 int sysctl_tcp_sack __read_mostly = 1;
 int sysctl_tcp_fack __read_mostly = 1;
 int sysctl_tcp_reordering __read_mostly = TCP_FASTRETRANS_THRESH;
-int sysctl_tcp_ecn __read_mostly;
+int sysctl_tcp_ecn __read_mostly = 2;
 int sysctl_tcp_dsack __read_mostly = 1;
 int sysctl_tcp_app_win __read_mostly = 31;
 int sysctl_tcp_adv_win_scale __read_mostly = 2;
@@ -4426,7 +4426,7 @@ drop:
 		}
 		__skb_queue_head(&tp->out_of_order_queue, skb);
 	} else {
-		struct sk_buff *skb1 = tp->out_of_order_queue.prev;
+		struct sk_buff *skb1 = skb_peek_tail(&tp->out_of_order_queue);
 		u32 seq = TCP_SKB_CB(skb)->seq;
 		u32 end_seq = TCP_SKB_CB(skb)->end_seq;
 
@@ -4443,15 +4443,18 @@ drop:
 		}
 
 		/* Find place to insert this segment. */
-		do {
+		while (1) {
 			if (!after(TCP_SKB_CB(skb1)->seq, seq))
 				break;
-		} while ((skb1 = skb1->prev) !=
-			 (struct sk_buff *)&tp->out_of_order_queue);
+			if (skb_queue_is_first(&tp->out_of_order_queue, skb1)) {
+				skb1 = NULL;
+				break;
+			}
+			skb1 = skb_queue_prev(&tp->out_of_order_queue, skb1);
+		}
 
 		/* Do skb overlap to previous one? */
-		if (skb1 != (struct sk_buff *)&tp->out_of_order_queue &&
-		    before(seq, TCP_SKB_CB(skb1)->end_seq)) {
+		if (skb1 && before(seq, TCP_SKB_CB(skb1)->end_seq)) {
 			if (!after(end_seq, TCP_SKB_CB(skb1)->end_seq)) {
 				/* All the bits are present. Drop. */
 				__kfree_skb(skb);
@@ -4463,15 +4466,26 @@ drop:
 				tcp_dsack_set(sk, seq,
 					      TCP_SKB_CB(skb1)->end_seq);
 			} else {
-				skb1 = skb1->prev;
+				if (skb_queue_is_first(&tp->out_of_order_queue,
+						       skb1))
+					skb1 = NULL;
+				else
+					skb1 = skb_queue_prev(
+						&tp->out_of_order_queue,
+						skb1);
 			}
 		}
-		__skb_queue_after(&tp->out_of_order_queue, skb1, skb);
+		if (!skb1)
+			__skb_queue_head(&tp->out_of_order_queue, skb);
+		else
+			__skb_queue_after(&tp->out_of_order_queue, skb1, skb);
 
 		/* And clean segments covered by new one as whole. */
-		while ((skb1 = skb->next) !=
-		       (struct sk_buff *)&tp->out_of_order_queue &&
-		       after(end_seq, TCP_SKB_CB(skb1)->seq)) {
+		while (!skb_queue_is_last(&tp->out_of_order_queue, skb)) {
+			skb1 = skb_queue_next(&tp->out_of_order_queue, skb);
+
+			if (!after(end_seq, TCP_SKB_CB(skb1)->seq))
+				break;
 			if (before(end_seq, TCP_SKB_CB(skb1)->end_seq)) {
 				tcp_dsack_extend(sk, TCP_SKB_CB(skb1)->seq,
 						 end_seq);
@@ -4492,7 +4506,10 @@ add_sack:
 static struct sk_buff *tcp_collapse_one(struct sock *sk, struct sk_buff *skb,
 					struct sk_buff_head *list)
 {
-	struct sk_buff *next = skb->next;
+	struct sk_buff *next = NULL;
+
+	if (!skb_queue_is_last(list, skb))
+		next = skb_queue_next(list, skb);
 
 	__skb_unlink(skb, list);
 	__kfree_skb(skb);
@@ -4503,6 +4520,9 @@ static struct sk_buff *tcp_collapse_one(struct sock *sk, struct sk_buff *skb,
 
 /* Collapse contiguous sequence of skbs head..tail with
  * sequence numbers start..end.
+ *
+ * If tail is NULL, this means until the end of the list.
+ *
  * Segments with FIN/SYN are not collapsed (only because this
  * simplifies code)
  */
@@ -4511,15 +4531,23 @@ tcp_collapse(struct sock *sk, struct sk_buff_head *list,
 	     struct sk_buff *head, struct sk_buff *tail,
 	     u32 start, u32 end)
 {
-	struct sk_buff *skb;
+	struct sk_buff *skb, *n;
+	bool end_of_skbs;
 
 	/* First, check that queue is collapsible and find
 	 * the point where collapsing can be useful. */
-	for (skb = head; skb != tail;) {
+	skb = head;
+restart:
+	end_of_skbs = true;
+	skb_queue_walk_from_safe(list, skb, n) {
+		if (skb == tail)
+			break;
 		/* No new bits? It is possible on ofo queue. */
 		if (!before(start, TCP_SKB_CB(skb)->end_seq)) {
 			skb = tcp_collapse_one(sk, skb, list);
-			continue;
+			if (!skb)
+				break;
+			goto restart;
 		}
 
 		/* The first skb to collapse is:
@@ -4529,16 +4557,24 @@ tcp_collapse(struct sock *sk, struct sk_buff_head *list,
 		 */
 		if (!tcp_hdr(skb)->syn && !tcp_hdr(skb)->fin &&
 		    (tcp_win_from_space(skb->truesize) > skb->len ||
-		     before(TCP_SKB_CB(skb)->seq, start) ||
-		     (skb->next != tail &&
-		      TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(skb->next)->seq)))
+		     before(TCP_SKB_CB(skb)->seq, start))) {
+			end_of_skbs = false;
 			break;
+		}
+
+		if (!skb_queue_is_last(list, skb)) {
+			struct sk_buff *next = skb_queue_next(list, skb);
+			if (next != tail &&
+			    TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(next)->seq) {
+				end_of_skbs = false;
+				break;
+			}
+		}
 
 		/* Decided to skip this, advance start seq. */
 		start = TCP_SKB_CB(skb)->end_seq;
-		skb = skb->next;
 	}
-	if (skb == tail || tcp_hdr(skb)->syn || tcp_hdr(skb)->fin)
+	if (end_of_skbs || tcp_hdr(skb)->syn || tcp_hdr(skb)->fin)
 		return;
 
 	while (before(start, end)) {
@@ -4583,7 +4619,8 @@ tcp_collapse(struct sock *sk, struct sk_buff_head *list,
 			}
 			if (!before(start, TCP_SKB_CB(skb)->end_seq)) {
 				skb = tcp_collapse_one(sk, skb, list);
-				if (skb == tail ||
+				if (!skb ||
+				    skb == tail ||
 				    tcp_hdr(skb)->syn ||
 				    tcp_hdr(skb)->fin)
 					return;
@@ -4610,17 +4647,21 @@ static void tcp_collapse_ofo_queue(struct sock *sk)
 	head = skb;
 
 	for (;;) {
-		skb = skb->next;
+		struct sk_buff *next = NULL;
+
+		if (!skb_queue_is_last(&tp->out_of_order_queue, skb))
+			next = skb_queue_next(&tp->out_of_order_queue, skb);
+		skb = next;
 
 		/* Segment is terminated when we see gap or when
 		 * we are at the end of all the queue. */
-		if (skb == (struct sk_buff *)&tp->out_of_order_queue ||
+		if (!skb ||
 		    after(TCP_SKB_CB(skb)->seq, end) ||
 		    before(TCP_SKB_CB(skb)->end_seq, start)) {
 			tcp_collapse(sk, &tp->out_of_order_queue,
 				     head, skb, start, end);
 			head = skb;
-			if (skb == (struct sk_buff *)&tp->out_of_order_queue)
+			if (!skb)
 				break;
 			/* Start new segment */
 			start = TCP_SKB_CB(skb)->seq;
@@ -4681,10 +4722,11 @@ static int tcp_prune_queue(struct sock *sk)
 		tp->rcv_ssthresh = min(tp->rcv_ssthresh, 4U * tp->advmss);
 
 	tcp_collapse_ofo_queue(sk);
-	tcp_collapse(sk, &sk->sk_receive_queue,
-		     sk->sk_receive_queue.next,
-		     (struct sk_buff *)&sk->sk_receive_queue,
-		     tp->copied_seq, tp->rcv_nxt);
+	if (!skb_queue_empty(&sk->sk_receive_queue))
+		tcp_collapse(sk, &sk->sk_receive_queue,
+			     skb_peek(&sk->sk_receive_queue),
+			     NULL,
+			     tp->copied_seq, tp->rcv_nxt);
 	sk_mem_reclaim(sk);
 
 	if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf)
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 5d427f86b41..5a1ca2698c8 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -546,7 +546,7 @@ static void tcp_v4_send_reset(struct sock *sk, struct sk_buff *skb)
 	if (th->rst)
 		return;
 
-	if (skb->rtable->rt_type != RTN_LOCAL)
+	if (skb_rtable(skb)->rt_type != RTN_LOCAL)
 		return;
 
 	/* Swap the send and the receive. */
@@ -590,7 +590,7 @@ static void tcp_v4_send_reset(struct sock *sk, struct sk_buff *skb)
 	arg.csumoffset = offsetof(struct tcphdr, check) / 2;
 	arg.flags = (sk && inet_sk(sk)->transparent) ? IP_REPLY_ARG_NOSRCCHECK : 0;
 
-	net = dev_net(skb->dst->dev);
+	net = dev_net(skb_dst(skb)->dev);
 	ip_send_reply(net->ipv4.tcp_sock, skb,
 		      &arg, arg.iov[0].iov_len);
 
@@ -617,7 +617,7 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack,
 			];
 	} rep;
 	struct ip_reply_arg arg;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	memset(&rep.th, 0, sizeof(struct tcphdr));
 	memset(&arg, 0, sizeof(arg));
@@ -1185,7 +1185,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 #endif
 
 	/* Never answer to SYNs send to broadcast or multicast */
-	if (skb->rtable->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
+	if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
 		goto drop;
 
 	/* TW buckets are converted to open requests without
@@ -1593,7 +1593,7 @@ process:
 #endif
 		{
 			if (!tcp_prequeue(sk, skb))
-			ret = tcp_v4_do_rcv(sk, skb);
+				ret = tcp_v4_do_rcv(sk, skb);
 		}
 	} else
 		sk_add_backlog(sk, skb);
@@ -2343,7 +2343,7 @@ void tcp4_proc_exit(void)
 
 struct sk_buff **tcp4_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 {
-	struct iphdr *iph = ip_hdr(skb);
+	struct iphdr *iph = skb_gro_network_header(skb);
 
 	switch (skb->ip_summed) {
 	case CHECKSUM_COMPLETE:
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 59aec609cec..416fc4c2e7e 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -288,7 +288,7 @@ static inline void TCP_ECN_send_syn(struct sock *sk, struct sk_buff *skb)
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	tp->ecn_flags = 0;
-	if (sysctl_tcp_ecn) {
+	if (sysctl_tcp_ecn == 1) {
 		TCP_SKB_CB(skb)->flags |= TCPCB_FLAG_ECE | TCPCB_FLAG_CWR;
 		tp->ecn_flags = TCP_ECN_OK;
 	}
@@ -2202,7 +2202,7 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
 	/* Reserve space for headers. */
 	skb_reserve(skb, MAX_TCP_HEADER);
 
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 
 	mss = dst_metric(dst, RTAX_ADVMSS);
 	if (tp->rx_opt.user_mss && tp->rx_opt.user_mss < mss)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 7a1d1ce22e6..8f4158d7c9a 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -328,7 +328,7 @@ static inline struct sock *__udp4_lib_lookup_skb(struct sk_buff *skb,
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
 	else
-		return __udp4_lib_lookup(dev_net(skb->dst->dev), iph->saddr, sport,
+		return __udp4_lib_lookup(dev_net(skb_dst(skb)->dev), iph->saddr, sport,
 					 iph->daddr, dport, inet_iif(skb),
 					 udptable);
 }
@@ -1237,7 +1237,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 	struct sock *sk;
 	struct udphdr *uh;
 	unsigned short ulen;
-	struct rtable *rt = (struct rtable*)skb->dst;
+	struct rtable *rt = skb_rtable(skb);
 	__be32 saddr, daddr;
 	struct net *net = dev_net(skb->dev);
 
diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c
index 4ec2162a437..f9f922a0ba8 100644
--- a/net/ipv4/xfrm4_input.c
+++ b/net/ipv4/xfrm4_input.c
@@ -23,7 +23,7 @@ int xfrm4_extract_input(struct xfrm_state *x, struct sk_buff *skb)
 
 static inline int xfrm4_rcv_encap_finish(struct sk_buff *skb)
 {
-	if (skb->dst == NULL) {
+	if (skb_dst(skb) == NULL) {
 		const struct iphdr *iph = ip_hdr(skb);
 
 		if (ip_route_input(skb, iph->daddr, iph->saddr, iph->tos,
diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c
index 7135279f3f8..3444f3b34ec 100644
--- a/net/ipv4/xfrm4_mode_tunnel.c
+++ b/net/ipv4/xfrm4_mode_tunnel.c
@@ -28,7 +28,7 @@ static inline void ipip_ecn_decapsulate(struct sk_buff *skb)
  */
 static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct iphdr *top_iph;
 	int flags;
 
@@ -41,7 +41,7 @@ static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 	top_iph->ihl = 5;
 	top_iph->version = 4;
 
-	top_iph->protocol = xfrm_af2proto(skb->dst->ops->family);
+	top_iph->protocol = xfrm_af2proto(skb_dst(skb)->ops->family);
 
 	/* DS disclosed */
 	top_iph->tos = INET_ECN_encapsulate(XFRM_MODE_SKB_CB(skb)->tos,
diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c
index 8c3180adddb..c908bd99bcb 100644
--- a/net/ipv4/xfrm4_output.c
+++ b/net/ipv4/xfrm4_output.c
@@ -29,7 +29,7 @@ static int xfrm4_tunnel_check_size(struct sk_buff *skb)
 	if (!(ip_hdr(skb)->frag_off & htons(IP_DF)) || skb->local_df)
 		goto out;
 
-	dst = skb->dst;
+	dst = skb_dst(skb);
 	mtu = dst_mtu(dst);
 	if (skb->len > mtu) {
 		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));
@@ -72,7 +72,7 @@ EXPORT_SYMBOL(xfrm4_prepare_output);
 static int xfrm4_output_finish(struct sk_buff *skb)
 {
 #ifdef CONFIG_NETFILTER
-	if (!skb->dst->xfrm) {
+	if (!skb_dst(skb)->xfrm) {
 		IPCB(skb)->flags |= IPSKB_REROUTED;
 		return dst_output(skb);
 	}
@@ -87,6 +87,6 @@ static int xfrm4_output_finish(struct sk_buff *skb)
 int xfrm4_output(struct sk_buff *skb)
 {
 	return NF_HOOK_COND(PF_INET, NF_INET_POST_ROUTING, skb,
-			    NULL, skb->dst->dev, xfrm4_output_finish,
+			    NULL, skb_dst(skb)->dev, xfrm4_output_finish,
 			    !(IPCB(skb)->flags & IPSKB_REROUTED));
 }
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ca8cb326d1d..ead6c7a42f4 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -168,7 +168,7 @@ config IPV6_SIT
 	  into IPv4 packets. This is useful if you want to connect two IPv6
 	  networks over an IPv4-only path.
 
-	  Saying M here will produce a module called sit.ko. If unsure, say Y.
+	  Saying M here will produce a module called sit. If unsure, say Y.
 
 config IPV6_NDISC_NODETYPE
 	bool
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a8218bc1806..8c1e86afbbf 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -503,7 +503,7 @@ static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 		return 0;
 
 	if (!rtnl_trylock())
-		return -ERESTARTSYS;
+		return restart_syscall();
 
 	if (p == &net->ipv6.devconf_all->forwarding) {
 		__s32 newf = net->ipv6.devconf_all->forwarding;
@@ -591,7 +591,6 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen,
 {
 	struct inet6_ifaddr *ifa = NULL;
 	struct rt6_info *rt;
-	struct net *net = dev_net(idev->dev);
 	int hash;
 	int err = 0;
 	int addr_type = ipv6_addr_type(addr);
@@ -608,7 +607,7 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen,
 		goto out2;
 	}
 
-	if (idev->cnf.disable_ipv6 || net->ipv6.devconf_all->disable_ipv6) {
+	if (idev->cnf.disable_ipv6) {
 		err = -EACCES;
 		goto out2;
 	}
@@ -1520,6 +1519,8 @@ static int addrconf_ifid_infiniband(u8 *eui, struct net_device *dev)
 
 int __ipv6_isatap_ifid(u8 *eui, __be32 addr)
 {
+	if (addr == 0)
+		return -1;
 	eui[0] = (ipv4_is_zeronet(addr) || ipv4_is_private_10(addr) ||
 		  ipv4_is_loopback(addr) || ipv4_is_linklocal_169(addr) ||
 		  ipv4_is_private_172(addr) || ipv4_is_test_192(addr) ||
@@ -1750,6 +1751,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 	__u32 prefered_lft;
 	int addr_type;
 	struct inet6_dev *in6_dev;
+	struct net *net = dev_net(dev);
 
 	pinfo = (struct prefix_info *) opt;
 
@@ -1807,7 +1809,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 		if (addrconf_finite_timeout(rt_expires))
 			rt_expires *= HZ;
 
-		rt = rt6_lookup(dev_net(dev), &pinfo->prefix, NULL,
+		rt = rt6_lookup(net, &pinfo->prefix, NULL,
 				dev->ifindex, 1);
 
 		if (rt && addrconf_is_prefix_route(rt)) {
@@ -1844,7 +1846,6 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len)
 		struct inet6_ifaddr * ifp;
 		struct in6_addr addr;
 		int create = 0, update_lft = 0;
-		struct net *net = dev_net(dev);
 
 		if (pinfo->prefix_len == 64) {
 			memcpy(&addr, &pinfo->prefix, 8);
@@ -2765,7 +2766,7 @@ static void addrconf_dad_start(struct inet6_ifaddr *ifp, u32 flags)
 		spin_unlock_bh(&ifp->lock);
 		read_unlock_bh(&idev->lock);
 		/*
-		 * If the defice is not ready:
+		 * If the device is not ready:
 		 * - keep it tentative if it is a permanent address.
 		 * - otherwise, kill it.
 		 */
@@ -3986,6 +3987,75 @@ static int addrconf_sysctl_forward_strategy(ctl_table *table,
 	return addrconf_fixup_forwarding(table, valp, val);
 }
 
+static void dev_disable_change(struct inet6_dev *idev)
+{
+	if (!idev || !idev->dev)
+		return;
+
+	if (idev->cnf.disable_ipv6)
+		addrconf_notify(NULL, NETDEV_DOWN, idev->dev);
+	else
+		addrconf_notify(NULL, NETDEV_UP, idev->dev);
+}
+
+static void addrconf_disable_change(struct net *net, __s32 newf)
+{
+	struct net_device *dev;
+	struct inet6_dev *idev;
+
+	read_lock(&dev_base_lock);
+	for_each_netdev(net, dev) {
+		rcu_read_lock();
+		idev = __in6_dev_get(dev);
+		if (idev) {
+			int changed = (!idev->cnf.disable_ipv6) ^ (!newf);
+			idev->cnf.disable_ipv6 = newf;
+			if (changed)
+				dev_disable_change(idev);
+		}
+		rcu_read_unlock();
+	}
+	read_unlock(&dev_base_lock);
+}
+
+static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int old)
+{
+	struct net *net;
+
+	net = (struct net *)table->extra2;
+
+	if (p == &net->ipv6.devconf_dflt->disable_ipv6)
+		return 0;
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	if (p == &net->ipv6.devconf_all->disable_ipv6) {
+		__s32 newf = net->ipv6.devconf_all->disable_ipv6;
+		net->ipv6.devconf_dflt->disable_ipv6 = newf;
+		addrconf_disable_change(net, newf);
+	} else if ((!*p) ^ (!old))
+		dev_disable_change((struct inet6_dev *)table->extra1);
+
+	rtnl_unlock();
+	return 0;
+}
+
+static
+int addrconf_sysctl_disable(ctl_table *ctl, int write, struct file * filp,
+			    void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	int *valp = ctl->data;
+	int val = *valp;
+	int ret;
+
+	ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+
+	if (write)
+		ret = addrconf_disable_ipv6(ctl, valp, val);
+	return ret;
+}
+
 static struct addrconf_sysctl_table
 {
 	struct ctl_table_header *sysctl_header;
@@ -4223,7 +4293,8 @@ static struct addrconf_sysctl_table
 			.data		=	&ipv6_devconf.disable_ipv6,
 			.maxlen		=	sizeof(int),
 			.mode		=	0644,
-			.proc_handler	=	proc_dointvec,
+			.proc_handler	=	addrconf_sysctl_disable,
+			.strategy	=	sysctl_intvec,
 		},
 		{
 			.ctl_name	=	CTL_UNNUMBERED,
@@ -4344,6 +4415,10 @@ static int addrconf_init_net(struct net *net)
 		dflt = kmemdup(dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
 		if (dflt == NULL)
 			goto err_alloc_dflt;
+	} else {
+		/* these will be inherited by all namespaces */
+		dflt->autoconf = ipv6_defaults.autoconf;
+		dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
 	}
 
 	net->ipv6.devconf_all = all;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 61f55386a23..85b3d0036af 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -72,9 +72,21 @@ MODULE_LICENSE("GPL");
 static struct list_head inetsw6[SOCK_MAX];
 static DEFINE_SPINLOCK(inetsw6_lock);
 
-static int disable_ipv6 = 0;
-module_param_named(disable, disable_ipv6, int, 0);
-MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+struct ipv6_params ipv6_defaults = {
+	.disable_ipv6 = 0,
+	.autoconf = 1,
+};
+
+static int disable_ipv6_mod = 0;
+
+module_param_named(disable, disable_ipv6_mod, int, 0444);
+MODULE_PARM_DESC(disable, "Disable IPv6 module such that it is non-functional");
+
+module_param_named(disable_ipv6, ipv6_defaults.disable_ipv6, int, 0444);
+MODULE_PARM_DESC(disable_ipv6, "Disable IPv6 on all interfaces");
+
+module_param_named(autoconf, ipv6_defaults.autoconf, int, 0444);
+MODULE_PARM_DESC(autoconf, "Enable IPv6 address autoconfiguration on all interfaces");
 
 static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
 {
@@ -817,13 +829,20 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head,
 	struct sk_buff *p;
 	struct ipv6hdr *iph;
 	unsigned int nlen;
+	unsigned int hlen;
+	unsigned int off;
 	int flush = 1;
 	int proto;
 	__wsum csum;
 
-	iph = skb_gro_header(skb, sizeof(*iph));
-	if (unlikely(!iph))
-		goto out;
+	off = skb_gro_offset(skb);
+	hlen = off + sizeof(*iph);
+	iph = skb_gro_header_fast(skb, off);
+	if (skb_gro_header_hard(skb, hlen)) {
+		iph = skb_gro_header_slow(skb, hlen, off);
+		if (unlikely(!iph))
+			goto out;
+	}
 
 	skb_gro_pull(skb, sizeof(*iph));
 	skb_set_transport_header(skb, skb_gro_offset(skb));
@@ -1031,7 +1050,7 @@ static int __init inet6_init(void)
 	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
 		INIT_LIST_HEAD(r);
 
-	if (disable_ipv6) {
+	if (disable_ipv6_mod) {
 		printk(KERN_INFO
 		       "IPv6: Loaded, but administratively disabled, "
 		       "reboot required to enable\n");
@@ -1220,7 +1239,7 @@ module_init(inet6_init);
 
 static void __exit inet6_exit(void)
 {
-	if (disable_ipv6)
+	if (disable_ipv6_mod)
 		return;
 
 	/* First of all disallow new sockets creation. */
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 1c7f400a3cf..4aae658e550 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -277,7 +277,7 @@ static int ipv6_destopt_rcv(struct sk_buff *skb)
 	if (!pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
 	    !pskb_may_pull(skb, (skb_transport_offset(skb) +
 				 ((skb_transport_header(skb)[1] + 1) << 3)))) {
-		IP6_INC_STATS_BH(dev_net(skb->dst->dev), ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INHDRERRORS);
 		kfree_skb(skb);
 		return -1;
@@ -288,7 +288,7 @@ static int ipv6_destopt_rcv(struct sk_buff *skb)
 	dstbuf = opt->dst1;
 #endif
 
-	dst = dst_clone(skb->dst);
+	dst = dst_clone(skb_dst(skb));
 	if (ip6_parse_tlv(tlvprocdestopt_lst, skb)) {
 		dst_release(dst);
 		skb->transport_header += (skb_transport_header(skb)[1] + 1) << 3;
@@ -333,7 +333,7 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
 	if (!pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
 	    !pskb_may_pull(skb, (skb_transport_offset(skb) +
 				 ((skb_transport_header(skb)[1] + 1) << 3)))) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INHDRERRORS);
 		kfree_skb(skb);
 		return -1;
@@ -343,7 +343,7 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
 
 	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr) ||
 	    skb->pkt_type != PACKET_HOST) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INADDRERRORS);
 		kfree_skb(skb);
 		return -1;
@@ -358,7 +358,7 @@ looped_back:
 			 * processed by own
 			 */
 			if (!addr) {
-				IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+				IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 						 IPSTATS_MIB_INADDRERRORS);
 				kfree_skb(skb);
 				return -1;
@@ -384,7 +384,7 @@ looped_back:
 			goto unknown_rh;
 		/* Silently discard invalid RTH type 2 */
 		if (hdr->hdrlen != 2 || hdr->segments_left != 1) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INHDRERRORS);
 			kfree_skb(skb);
 			return -1;
@@ -403,7 +403,7 @@ looped_back:
 	n = hdr->hdrlen >> 1;
 
 	if (hdr->segments_left > n) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INHDRERRORS);
 		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 				  ((&hdr->segments_left) -
@@ -417,7 +417,7 @@ looped_back:
 	if (skb_cloned(skb)) {
 		/* the copy is a forwarded packet */
 		if (pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_OUTDISCARDS);
 			kfree_skb(skb);
 			return -1;
@@ -440,13 +440,13 @@ looped_back:
 		if (xfrm6_input_addr(skb, (xfrm_address_t *)addr,
 				     (xfrm_address_t *)&ipv6_hdr(skb)->saddr,
 				     IPPROTO_ROUTING) < 0) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INADDRERRORS);
 			kfree_skb(skb);
 			return -1;
 		}
-		if (!ipv6_chk_home_addr(dev_net(skb->dst->dev), addr)) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		if (!ipv6_chk_home_addr(dev_net(skb_dst(skb)->dev), addr)) {
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INADDRERRORS);
 			kfree_skb(skb);
 			return -1;
@@ -458,7 +458,7 @@ looped_back:
 	}
 
 	if (ipv6_addr_is_multicast(addr)) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INADDRERRORS);
 		kfree_skb(skb);
 		return -1;
@@ -468,17 +468,17 @@ looped_back:
 	ipv6_addr_copy(addr, &ipv6_hdr(skb)->daddr);
 	ipv6_addr_copy(&ipv6_hdr(skb)->daddr, &daddr);
 
-	dst_release(xchg(&skb->dst, NULL));
+	skb_dst_drop(skb);
 	ip6_route_input(skb);
-	if (skb->dst->error) {
+	if (skb_dst(skb)->error) {
 		skb_push(skb, skb->data - skb_network_header(skb));
 		dst_input(skb);
 		return -1;
 	}
 
-	if (skb->dst->dev->flags&IFF_LOOPBACK) {
+	if (skb_dst(skb)->dev->flags&IFF_LOOPBACK) {
 		if (ipv6_hdr(skb)->hop_limit <= 1) {
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INHDRERRORS);
 			icmpv6_send(skb, ICMPV6_TIME_EXCEED, ICMPV6_EXC_HOPLIMIT,
 				    0, skb->dev);
@@ -494,7 +494,7 @@ looped_back:
 	return -1;
 
 unknown_rh:
-	IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
+	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INHDRERRORS);
 	icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 			  (&hdr->type) - skb_network_header(skb));
 	return -1;
@@ -552,11 +552,11 @@ void ipv6_exthdrs_exit(void)
  **********************************/
 
 /*
- * Note: we cannot rely on skb->dst before we assign it in ip6_route_input().
+ * Note: we cannot rely on skb_dst(skb) before we assign it in ip6_route_input().
  */
 static inline struct inet6_dev *ipv6_skb_idev(struct sk_buff *skb)
 {
-	return skb->dst ? ip6_dst_idev(skb->dst) : __in6_dev_get(skb->dev);
+	return skb_dst(skb) ? ip6_dst_idev(skb_dst(skb)) : __in6_dev_get(skb->dev);
 }
 
 /* Router Alert as of RFC 2711 */
@@ -581,7 +581,7 @@ static int ipv6_hop_jumbo(struct sk_buff *skb, int optoff)
 {
 	const unsigned char *nh = skb_network_header(skb);
 	u32 pkt_len;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	if (nh[optoff + 1] != 4 || (optoff & 3) != 2) {
 		LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n",
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index f5de3f9dc69..00a7a5e4ac9 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -151,7 +151,7 @@ static const struct nla_policy fib6_rule_policy[FRA_MAX+1] = {
 };
 
 static int fib6_rule_configure(struct fib_rule *rule, struct sk_buff *skb,
-			       struct nlmsghdr *nlh, struct fib_rule_hdr *frh,
+			       struct fib_rule_hdr *frh,
 			       struct nlattr **tb)
 {
 	int err = -EINVAL;
@@ -211,7 +211,7 @@ static int fib6_rule_compare(struct fib_rule *rule, struct fib_rule_hdr *frh,
 }
 
 static int fib6_rule_fill(struct fib_rule *rule, struct sk_buff *skb,
-			  struct nlmsghdr *nlh, struct fib_rule_hdr *frh)
+			  struct fib_rule_hdr *frh)
 {
 	struct fib6_rule *rule6 = (struct fib6_rule *) rule;
 
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index 3c3732d50c1..cc4797dd832 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -228,7 +228,7 @@ int inet6_csk_xmit(struct sk_buff *skb, int ipfragok)
 		__inet6_csk_dst_store(sk, dst, NULL, NULL);
 	}
 
-	skb->dst = dst_clone(dst);
+	skb_dst_set(skb, dst_clone(dst));
 
 	/* Restore final destination back after routing done */
 	ipv6_addr_copy(&fl.fl6_dst, &np->daddr);
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 8f04bd9da27..c3a07d75b5f 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -48,7 +48,7 @@
 
 inline int ip6_rcv_finish( struct sk_buff *skb)
 {
-	if (skb->dst == NULL)
+	if (skb_dst(skb) == NULL)
 		ip6_route_input(skb);
 
 	return dst_input(skb);
@@ -70,7 +70,7 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
 
 	idev = __in6_dev_get(skb->dev);
 
-	IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INRECEIVES);
+	IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_IN, skb->len);
 
 	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
 	    !idev || unlikely(idev->cnf.disable_ipv6)) {
@@ -91,7 +91,7 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
 	 * arrived via the sending interface (ethX), because of the
 	 * nature of scoping architecture. --yoshfuji
 	 */
-	IP6CB(skb)->iif = skb->dst ? ip6_dst_idev(skb->dst)->dev->ifindex : dev->ifindex;
+	IP6CB(skb)->iif = skb_dst(skb) ? ip6_dst_idev(skb_dst(skb))->dev->ifindex : dev->ifindex;
 
 	if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
 		goto err;
@@ -161,7 +161,7 @@ static int ip6_input_finish(struct sk_buff *skb)
 	int nexthdr, raw;
 	u8 hash;
 	struct inet6_dev *idev;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	/*
 	 *	Parse extension headers
@@ -169,7 +169,7 @@ static int ip6_input_finish(struct sk_buff *skb)
 
 	rcu_read_lock();
 resubmit:
-	idev = ip6_dst_idev(skb->dst);
+	idev = ip6_dst_idev(skb_dst(skb));
 	if (!pskb_pull(skb, skb_transport_offset(skb)))
 		goto discard;
 	nhoff = IP6CB(skb)->nhoff;
@@ -242,8 +242,9 @@ int ip6_mc_input(struct sk_buff *skb)
 	struct ipv6hdr *hdr;
 	int deliver;
 
-	IP6_INC_STATS_BH(dev_net(skb->dst->dev),
-			 ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
+	IP6_UPD_PO_STATS_BH(dev_net(skb_dst(skb)->dev),
+			 ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INMCAST,
+			 skb->len);
 
 	hdr = ipv6_hdr(skb);
 	deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 9fb49c3b518..7c76e3d1821 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -78,7 +78,7 @@ int __ip6_local_out(struct sk_buff *skb)
 		len = 0;
 	ipv6_hdr(skb)->payload_len = htons(len);
 
-	return nf_hook(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, skb->dst->dev,
+	return nf_hook(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, skb_dst(skb)->dev,
 		       dst_output);
 }
 
@@ -96,7 +96,7 @@ EXPORT_SYMBOL_GPL(ip6_local_out);
 
 static int ip6_output_finish(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 
 	if (dst->hh)
 		return neigh_hh_output(dst->hh, skb);
@@ -117,7 +117,7 @@ static int ip6_dev_loopback_xmit(struct sk_buff *newskb)
 	__skb_pull(newskb, skb_network_offset(newskb));
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
-	WARN_ON(!newskb->dst);
+	WARN_ON(!skb_dst(newskb));
 
 	netif_rx(newskb);
 	return 0;
@@ -126,7 +126,7 @@ static int ip6_dev_loopback_xmit(struct sk_buff *newskb)
 
 static int ip6_output2(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct net_device *dev = dst->dev;
 
 	skb->protocol = htons(ETH_P_IPV6);
@@ -134,7 +134,7 @@ static int ip6_output2(struct sk_buff *skb)
 
 	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
 		struct ipv6_pinfo* np = skb->sk ? inet6_sk(skb->sk) : NULL;
-		struct inet6_dev *idev = ip6_dst_idev(skb->dst);
+		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
 
 		if (!(dev->flags & IFF_LOOPBACK) && (!np || np->mc_loop) &&
 		    ((mroute6_socket(dev_net(dev)) &&
@@ -159,7 +159,8 @@ static int ip6_output2(struct sk_buff *skb)
 			}
 		}
 
-		IP6_INC_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCASTPKTS);
+		IP6_UPD_PO_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCAST,
+				skb->len);
 	}
 
 	return NF_HOOK(PF_INET6, NF_INET_POST_ROUTING, skb, NULL, skb->dev,
@@ -171,21 +172,21 @@ static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
 	struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
 
 	return (np && np->pmtudisc == IPV6_PMTUDISC_PROBE) ?
-	       skb->dst->dev->mtu : dst_mtu(skb->dst);
+	       skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
 }
 
 int ip6_output(struct sk_buff *skb)
 {
-	struct inet6_dev *idev = ip6_dst_idev(skb->dst);
+	struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
 	if (unlikely(idev->cnf.disable_ipv6)) {
-		IP6_INC_STATS(dev_net(skb->dst->dev), idev,
+		IP6_INC_STATS(dev_net(skb_dst(skb)->dev), idev,
 			      IPSTATS_MIB_OUTDISCARDS);
 		kfree_skb(skb);
 		return 0;
 	}
 
 	if ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
-				dst_allfrag(skb->dst))
+				dst_allfrag(skb_dst(skb)))
 		return ip6_fragment(skb, ip6_output2);
 	else
 		return ip6_output2(skb);
@@ -201,7 +202,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 	struct net *net = sock_net(sk);
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct in6_addr *first_hop = &fl->fl6_dst;
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct ipv6hdr *hdr;
 	u8  proto = fl->proto;
 	int seg_len = skb->len;
@@ -221,7 +222,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 		if (skb_headroom(skb) < head_room) {
 			struct sk_buff *skb2 = skb_realloc_headroom(skb, head_room);
 			if (skb2 == NULL) {
-				IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+				IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 					      IPSTATS_MIB_OUTDISCARDS);
 				kfree_skb(skb);
 				return -ENOBUFS;
@@ -275,8 +276,8 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 
 	mtu = dst_mtu(dst);
 	if ((skb->len <= mtu) || skb->local_df || skb_is_gso(skb)) {
-		IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
-			      IPSTATS_MIB_OUTREQUESTS);
+		IP6_UPD_PO_STATS(net, ip6_dst_idev(skb_dst(skb)),
+			      IPSTATS_MIB_OUT, skb->len);
 		return NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev,
 				dst_output);
 	}
@@ -285,7 +286,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
 		printk(KERN_DEBUG "IPv6: sending pkt_too_big to self\n");
 	skb->dev = dst->dev;
 	icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_FRAGFAILS);
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_FRAGFAILS);
 	kfree_skb(skb);
 	return -EMSGSIZE;
 }
@@ -415,7 +416,7 @@ static inline int ip6_forward_finish(struct sk_buff *skb)
 
 int ip6_forward(struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct ipv6hdr *hdr = ipv6_hdr(skb);
 	struct inet6_skb_parm *opt = IP6CB(skb);
 	struct net *net = dev_net(dst->dev);
@@ -484,7 +485,7 @@ int ip6_forward(struct sk_buff *skb)
 		IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_INDISCARDS);
 		goto drop;
 	}
-	dst = skb->dst;
+	dst = skb_dst(skb);
 
 	/* IPv6 specs say nothing about it, but it is clear that we cannot
 	   send redirects to source routed frames.
@@ -565,8 +566,8 @@ static void ip6_copy_metadata(struct sk_buff *to, struct sk_buff *from)
 	to->pkt_type = from->pkt_type;
 	to->priority = from->priority;
 	to->protocol = from->protocol;
-	dst_release(to->dst);
-	to->dst = dst_clone(from->dst);
+	skb_dst_drop(to);
+	skb_dst_set(to, dst_clone(skb_dst(from)));
 	to->dev = from->dev;
 	to->mark = from->mark;
 
@@ -623,7 +624,7 @@ int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
 static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 {
 	struct sk_buff *frag;
-	struct rt6_info *rt = (struct rt6_info*)skb->dst;
+	struct rt6_info *rt = (struct rt6_info*)skb_dst(skb);
 	struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
 	struct ipv6hdr *tmp_hdr;
 	struct frag_hdr *fh;
@@ -631,7 +632,7 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	__be32 frag_id = 0;
 	int ptr, offset = 0, err=0;
 	u8 *prevhdr, nexthdr = 0;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	hlen = ip6_find_1stfragopt(skb, &prevhdr);
 	nexthdr = *prevhdr;
@@ -643,9 +644,9 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	 * check should be redundant, but it's free.)
 	 */
 	if (!skb->local_df) {
-		skb->dev = skb->dst->dev;
+		skb->dev = skb_dst(skb)->dev;
 		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
-		IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 			      IPSTATS_MIB_FRAGFAILS);
 		kfree_skb(skb);
 		return -EMSGSIZE;
@@ -657,7 +658,7 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 	}
 	mtu -= hlen + sizeof(struct frag_hdr);
 
-	if (skb_shinfo(skb)->frag_list) {
+	if (skb_has_frags(skb)) {
 		int first_len = skb_pagelen(skb);
 		int truesizes = 0;
 
@@ -666,7 +667,7 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 		    skb_cloned(skb))
 			goto slow_path;
 
-		for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+		skb_walk_frags(skb, frag) {
 			/* Correct geometry. */
 			if (frag->len > mtu ||
 			    ((frag->len & 7) && frag->next) ||
@@ -679,7 +680,6 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 
 			BUG_ON(frag->sk);
 			if (skb->sk) {
-				sock_hold(skb->sk);
 				frag->sk = skb->sk;
 				frag->destructor = sock_wfree;
 				truesizes += frag->truesize;
@@ -689,13 +689,13 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 		err = 0;
 		offset = 0;
 		frag = skb_shinfo(skb)->frag_list;
-		skb_shinfo(skb)->frag_list = NULL;
+		skb_frag_list_init(skb);
 		/* BUILD HEADER */
 
 		*prevhdr = NEXTHDR_FRAGMENT;
 		tmp_hdr = kmemdup(skb_network_header(skb), hlen, GFP_ATOMIC);
 		if (!tmp_hdr) {
-			IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 				      IPSTATS_MIB_FRAGFAILS);
 			return -ENOMEM;
 		}
@@ -808,7 +808,7 @@ slow_path:
 
 		if ((frag = alloc_skb(len+hlen+sizeof(struct frag_hdr)+LL_ALLOCATED_SPACE(rt->u.dst.dev), GFP_ATOMIC)) == NULL) {
 			NETDEBUG(KERN_INFO "IPv6: frag: no memory for new fragment!\n");
-			IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 				      IPSTATS_MIB_FRAGFAILS);
 			err = -ENOMEM;
 			goto fail;
@@ -872,16 +872,16 @@ slow_path:
 		if (err)
 			goto fail;
 
-		IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 			      IPSTATS_MIB_FRAGCREATES);
 	}
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 		      IPSTATS_MIB_FRAGOKS);
 	kfree_skb(skb);
 	return err;
 
 fail:
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 		      IPSTATS_MIB_FRAGFAILS);
 	kfree_skb(skb);
 	return err;
@@ -1515,10 +1515,10 @@ int ip6_push_pending_frames(struct sock *sk)
 	skb->priority = sk->sk_priority;
 	skb->mark = sk->sk_mark;
 
-	skb->dst = dst_clone(&rt->u.dst);
-	IP6_INC_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUTREQUESTS);
+	skb_dst_set(skb, dst_clone(&rt->u.dst));
+	IP6_UPD_PO_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
 	if (proto == IPPROTO_ICMPV6) {
-		struct inet6_dev *idev = ip6_dst_idev(skb->dst);
+		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
 
 		ICMP6MSGOUT_INC_STATS_BH(net, idev, icmp6_hdr(skb)->icmp6_type);
 		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
@@ -1544,8 +1544,8 @@ void ip6_flush_pending_frames(struct sock *sk)
 	struct sk_buff *skb;
 
 	while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL) {
-		if (skb->dst)
-			IP6_INC_STATS(sock_net(sk), ip6_dst_idev(skb->dst),
+		if (skb_dst(skb))
+			IP6_INC_STATS(sock_net(sk), ip6_dst_idev(skb_dst(skb)),
 				      IPSTATS_MIB_OUTDISCARDS);
 		kfree_skb(skb);
 	}
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index d994c55a5b1..404d16a97d5 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -532,8 +532,8 @@ ip4ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	if (!skb2)
 		return 0;
 
-	dst_release(skb2->dst);
-	skb2->dst = NULL;
+	skb_dst_drop(skb2);
+
 	skb_pull(skb2, offset);
 	skb_reset_network_header(skb2);
 	eiph = ip_hdr(skb2);
@@ -560,21 +560,21 @@ ip4ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 			ip_rt_put(rt);
 			goto out;
 		}
-		skb2->dst = (struct dst_entry *)rt;
+		skb_dst_set(skb2, (struct dst_entry *)rt);
 	} else {
 		ip_rt_put(rt);
 		if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos,
 				   skb2->dev) ||
-		    skb2->dst->dev->type != ARPHRD_TUNNEL)
+		    skb_dst(skb2)->dev->type != ARPHRD_TUNNEL)
 			goto out;
 	}
 
 	/* change mtu on this route */
 	if (rel_type == ICMP_DEST_UNREACH && rel_code == ICMP_FRAG_NEEDED) {
-		if (rel_info > dst_mtu(skb2->dst))
+		if (rel_info > dst_mtu(skb_dst(skb2)))
 			goto out;
 
-		skb2->dst->ops->update_pmtu(skb2->dst, rel_info);
+		skb_dst(skb2)->ops->update_pmtu(skb_dst(skb2), rel_info);
 	}
 
 	icmp_send(skb2, rel_type, rel_code, htonl(rel_info));
@@ -606,8 +606,7 @@ ip6ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		if (!skb2)
 			return 0;
 
-		dst_release(skb2->dst);
-		skb2->dst = NULL;
+		skb_dst_drop(skb2);
 		skb_pull(skb2, offset);
 		skb_reset_network_header(skb2);
 
@@ -720,8 +719,7 @@ static int ip6_tnl_rcv(struct sk_buff *skb, __u16 protocol,
 		skb->pkt_type = PACKET_HOST;
 		memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
 		skb->dev = t->dev;
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 
 		dscp_ecn_decapsulate(t, ipv6h, skb);
@@ -885,8 +883,8 @@ static int ip6_tnl_xmit2(struct sk_buff *skb,
 	}
 	if (mtu < IPV6_MIN_MTU)
 		mtu = IPV6_MIN_MTU;
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 	if (skb->len > mtu) {
 		*pmtu = mtu;
 		err = -EMSGSIZE;
@@ -910,8 +908,8 @@ static int ip6_tnl_xmit2(struct sk_buff *skb,
 		kfree_skb(skb);
 		skb = new_skb;
 	}
-	dst_release(skb->dst);
-	skb->dst = dst_clone(dst);
+	skb_dst_drop(skb);
+	skb_dst_set(skb, dst_clone(dst));
 
 	skb->transport_header = skb->network_header;
 
@@ -1100,8 +1098,8 @@ static void ip6_tnl_link_config(struct ip6_tnl *t)
 	struct ip6_tnl_parm *p = &t->parms;
 	struct flowi *fl = &t->fl;
 
-	memcpy(&dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
-	memcpy(&dev->broadcast, &p->raddr, sizeof(struct in6_addr));
+	memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
+	memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr));
 
 	/* Set up flowi template */
 	ipv6_addr_copy(&fl->fl6_src, &p->laddr);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 228be551e9c..c769f155c69 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -398,10 +398,9 @@ static int pim6_rcv(struct sk_buff *skb)
 	skb->protocol = htons(ETH_P_IPV6);
 	skb->ip_summed = 0;
 	skb->pkt_type = PACKET_HOST;
-	dst_release(skb->dst);
+	skb_dst_drop(skb);
 	reg_dev->stats.rx_bytes += skb->len;
 	reg_dev->stats.rx_packets++;
-	skb->dst = NULL;
 	nf_reset(skb);
 	netif_rx(skb);
 	dev_put(reg_dev);
@@ -442,6 +441,7 @@ static void reg_vif_setup(struct net_device *dev)
 	dev->flags		= IFF_NOARP;
 	dev->netdev_ops		= &reg_vif_netdev_ops;
 	dev->destructor		= free_netdev;
+	dev->features		|= NETIF_F_NETNS_LOCAL;
 }
 
 static struct net_device *ip6mr_reg_vif(struct net *net)
@@ -849,7 +849,7 @@ static int ip6mr_cache_report(struct net *net, struct sk_buff *pkt, mifi_t mifi,
 	ipv6_addr_copy(&msg->im6_src, &ipv6_hdr(pkt)->saddr);
 	ipv6_addr_copy(&msg->im6_dst, &ipv6_hdr(pkt)->daddr);
 
-	skb->dst = dst_clone(pkt->dst);
+	skb_dst_set(skb, dst_clone(skb_dst(pkt)));
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	}
 
@@ -1078,7 +1078,18 @@ int __init ip6_mr_init(void)
 	err = register_netdevice_notifier(&ip6_mr_notifier);
 	if (err)
 		goto reg_notif_fail;
+#ifdef CONFIG_IPV6_PIMSM_V2
+	if (inet6_add_protocol(&pim6_protocol, IPPROTO_PIM) < 0) {
+		printk(KERN_ERR "ip6_mr_init: can't add PIM protocol\n");
+		err = -EAGAIN;
+		goto add_proto_fail;
+	}
+#endif
 	return 0;
+#ifdef CONFIG_IPV6_PIMSM_V2
+add_proto_fail:
+	unregister_netdevice_notifier(&ip6_mr_notifier);
+#endif
 reg_notif_fail:
 	del_timer(&ipmr_expire_timer);
 	unregister_pernet_subsys(&ip6mr_net_ops);
@@ -1364,14 +1375,6 @@ int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int
 		if (v != net->ipv6.mroute_do_pim) {
 			net->ipv6.mroute_do_pim = v;
 			net->ipv6.mroute_do_assert = v;
-			if (net->ipv6.mroute_do_pim)
-				ret = inet6_add_protocol(&pim6_protocol,
-							 IPPROTO_PIM);
-			else
-				ret = inet6_del_protocol(&pim6_protocol,
-							 IPPROTO_PIM);
-			if (ret < 0)
-				ret = -EAGAIN;
 		}
 		rtnl_unlock();
 		return ret;
@@ -1487,7 +1490,7 @@ int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg)
 
 static inline int ip6mr_forward2_finish(struct sk_buff *skb)
 {
-	IP6_INC_STATS_BH(dev_net(skb->dst->dev), ip6_dst_idev(skb->dst),
+	IP6_INC_STATS_BH(dev_net(skb_dst(skb)->dev), ip6_dst_idev(skb_dst(skb)),
 			 IPSTATS_MIB_OUTFORWDATAGRAMS);
 	return dst_output(skb);
 }
@@ -1532,8 +1535,8 @@ static int ip6mr_forward2(struct sk_buff *skb, struct mfc6_cache *c, int vifi)
 	if (!dst)
 		goto out_free;
 
-	dst_release(skb->dst);
-	skb->dst = dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, dst);
 
 	/*
 	 * RFC1584 teaches, that DVMRP/PIM router must deliver packets locally
@@ -1722,7 +1725,7 @@ int ip6mr_get_route(struct net *net,
 {
 	int err;
 	struct mfc6_cache *cache;
-	struct rt6_info *rt = (struct rt6_info *)skb->dst;
+	struct rt6_info *rt = (struct rt6_info *)skb_dst(skb);
 
 	read_lock(&mrt_lock);
 	cache = ip6mr_cache_find(net, &rt->rt6i_src.addr, &rt->rt6i_dst.addr);
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index a51fb33e686..4b264ed40a8 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1448,8 +1448,10 @@ static void mld_sendpack(struct sk_buff *skb)
 	struct net *net = dev_net(skb->dev);
 	int err;
 	struct flowi fl;
+	struct dst_entry *dst;
+
+	IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);
 
-	IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTREQUESTS);
 	payload_len = (skb->tail - skb->network_header) - sizeof(*pip6);
 	mldlen = skb->tail - skb->transport_header;
 	pip6->payload_len = htons(payload_len);
@@ -1458,9 +1460,9 @@ static void mld_sendpack(struct sk_buff *skb)
 		IPPROTO_ICMPV6, csum_partial(skb_transport_header(skb),
 					     mldlen, 0));
 
-	skb->dst = icmp6_dst_alloc(skb->dev, NULL, &ipv6_hdr(skb)->daddr);
+	dst = icmp6_dst_alloc(skb->dev, NULL, &ipv6_hdr(skb)->daddr);
 
-	if (!skb->dst) {
+	if (!dst) {
 		err = -ENOMEM;
 		goto err_out;
 	}
@@ -1469,17 +1471,20 @@ static void mld_sendpack(struct sk_buff *skb)
 			 &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
 			 skb->dev->ifindex);
 
-	err = xfrm_lookup(net, &skb->dst, &fl, NULL, 0);
+	err = xfrm_lookup(net, &dst, &fl, NULL, 0);
+	skb_dst_set(skb, dst);
 	if (err)
 		goto err_out;
 
+	payload_len = skb->len;
+
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, skb->dev,
 		      dst_output);
 out:
 	if (!err) {
 		ICMP6MSGOUT_INC_STATS_BH(net, idev, ICMPV6_MLD2_REPORT);
 		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
-		IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_OUTMCASTPKTS);
+		IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_OUTMCAST, payload_len);
 	} else
 		IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_OUTDISCARDS);
 
@@ -1772,11 +1777,8 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
 		     IPV6_TLV_ROUTERALERT, 2, 0, 0,
 		     IPV6_TLV_PADN, 0 };
 	struct flowi fl;
+	struct dst_entry *dst;
 
-	rcu_read_lock();
-	IP6_INC_STATS(net, __in6_dev_get(dev),
-		      IPSTATS_MIB_OUTREQUESTS);
-	rcu_read_unlock();
 	if (type == ICMPV6_MGM_REDUCTION)
 		snd_addr = &in6addr_linklocal_allrouters;
 	else
@@ -1786,6 +1788,11 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
 	payload_len = len + sizeof(ra);
 	full_len = sizeof(struct ipv6hdr) + payload_len;
 
+	rcu_read_lock();
+	IP6_UPD_PO_STATS(net, __in6_dev_get(dev),
+		      IPSTATS_MIB_OUT, full_len);
+	rcu_read_unlock();
+
 	skb = sock_alloc_send_skb(sk, LL_ALLOCATED_SPACE(dev) + full_len, 1, &err);
 
 	if (skb == NULL) {
@@ -1824,8 +1831,8 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
 
 	idev = in6_dev_get(skb->dev);
 
-	skb->dst = icmp6_dst_alloc(skb->dev, NULL, &ipv6_hdr(skb)->daddr);
-	if (!skb->dst) {
+	dst = icmp6_dst_alloc(skb->dev, NULL, &ipv6_hdr(skb)->daddr);
+	if (!dst) {
 		err = -ENOMEM;
 		goto err_out;
 	}
@@ -1834,17 +1841,18 @@ static void igmp6_send(struct in6_addr *addr, struct net_device *dev, int type)
 			 &ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
 			 skb->dev->ifindex);
 
-	err = xfrm_lookup(net, &skb->dst, &fl, NULL, 0);
+	err = xfrm_lookup(net, &dst, &fl, NULL, 0);
 	if (err)
 		goto err_out;
 
+	skb_dst_set(skb, dst);
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, skb->dev,
 		      dst_output);
 out:
 	if (!err) {
 		ICMP6MSGOUT_INC_STATS(net, idev, type);
 		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
-		IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTMCASTPKTS);
+		IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, full_len);
 	} else
 		IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
 
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 9f061d1adbc..9eb68e92cc1 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -465,8 +465,8 @@ struct sk_buff *ndisc_build_skb(struct net_device *dev,
 				  1, &err);
 	if (!skb) {
 		ND_PRINTK0(KERN_ERR
-			   "ICMPv6 ND: %s() failed to allocate an skb.\n",
-			   __func__);
+			   "ICMPv6 ND: %s() failed to allocate an skb, err=%d.\n",
+			   __func__, err);
 		return NULL;
 	}
 
@@ -530,10 +530,10 @@ void ndisc_send_skb(struct sk_buff *skb,
 		return;
 	}
 
-	skb->dst = dst;
+	skb_dst_set(skb, dst);
 
 	idev = in6_dev_get(dst->dev);
-	IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTREQUESTS);
+	IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);
 
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev,
 		      dst_output);
@@ -658,6 +658,7 @@ void ndisc_send_rs(struct net_device *dev, const struct in6_addr *saddr,
 		     &icmp6h, NULL,
 		     send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0);
 }
+EXPORT_SYMBOL(ndisc_send_rs);
 
 
 static void ndisc_error_report(struct neighbour *neigh, struct sk_buff *skb)
@@ -1561,8 +1562,8 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh,
 				   1, &err);
 	if (buff == NULL) {
 		ND_PRINTK0(KERN_ERR
-			   "ICMPv6 Redirect: %s() failed to allocate an skb.\n",
-			   __func__);
+			   "ICMPv6 Redirect: %s() failed to allocate an skb, err=%d.\n",
+			   __func__, err);
 		goto release;
 	}
 
@@ -1611,9 +1612,9 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh,
 					     len, IPPROTO_ICMPV6,
 					     csum_partial(icmph, len, 0));
 
-	buff->dst = dst;
+	skb_dst_set(buff, dst);
 	idev = in6_dev_get(dst->dev);
-	IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTREQUESTS);
+	IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, buff, NULL, dst->dev,
 		      dst_output);
 	if (!err) {
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 834cea69fb5..d5ed92b1434 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -12,7 +12,7 @@
 
 int ip6_route_me_harder(struct sk_buff *skb)
 {
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 	struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct dst_entry *dst;
 	struct flowi fl = {
@@ -28,9 +28,15 @@ int ip6_route_me_harder(struct sk_buff *skb)
 
 #ifdef CONFIG_XFRM
 	if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) &&
-	    xfrm_decode_session(skb, &fl, AF_INET6) == 0)
-		if (xfrm_lookup(net, &skb->dst, &fl, skb->sk, 0))
+	    xfrm_decode_session(skb, &fl, AF_INET6) == 0) {
+		struct dst_entry *dst2 = skb_dst(skb);
+
+		if (xfrm_lookup(net, &dst2, &fl, skb->sk, 0)) {
+			skb_dst_set(skb, NULL);
 			return -1;
+		}
+		skb_dst_set(skb, dst2);
+	}
 #endif
 
 	if (dst->error) {
@@ -41,9 +47,9 @@ int ip6_route_me_harder(struct sk_buff *skb)
 	}
 
 	/* Drop old route. */
-	dst_release(skb->dst);
+	skb_dst_drop(skb);
 
-	skb->dst = dst;
+	skb_dst_set(skb, dst);
 	return 0;
 }
 EXPORT_SYMBOL(ip6_route_me_harder);
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index b693f841aeb..1cf3f0c6a95 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -598,7 +598,7 @@ static int __init ip6_queue_init(void)
 #ifdef CONFIG_SYSCTL
 	ipq_sysctl_header = register_sysctl_paths(net_ipv6_ctl_path, ipq_table);
 #endif
-	status = nf_register_queue_handler(PF_INET6, &nfqh);
+	status = nf_register_queue_handler(NFPROTO_IPV6, &nfqh);
 	if (status < 0) {
 		printk(KERN_ERR "ip6_queue: failed to register queue handler\n");
 		goto cleanup_sysctl;
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 219e165aea1..ced1f2c0cb6 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -270,8 +270,8 @@ static struct nf_loginfo trace_loginfo = {
 /* Mildly perf critical (only if packet tracing is on) */
 static inline int
 get_chainname_rulenum(struct ip6t_entry *s, struct ip6t_entry *e,
-		      char *hookname, char **chainname,
-		      char **comment, unsigned int *rulenum)
+		      const char *hookname, const char **chainname,
+		      const char **comment, unsigned int *rulenum)
 {
 	struct ip6t_standard_target *t = (void *)ip6t_get_target(s);
 
@@ -289,8 +289,8 @@ get_chainname_rulenum(struct ip6t_entry *s, struct ip6t_entry *e,
 		   && unconditional(&s->ipv6)) {
 			/* Tail of chains: STANDARD target (return/policy) */
 			*comment = *chainname == hookname
-				? (char *)comments[NF_IP6_TRACE_COMMENT_POLICY]
-				: (char *)comments[NF_IP6_TRACE_COMMENT_RETURN];
+				? comments[NF_IP6_TRACE_COMMENT_POLICY]
+				: comments[NF_IP6_TRACE_COMMENT_RETURN];
 		}
 		return 1;
 	} else
@@ -309,14 +309,14 @@ static void trace_packet(struct sk_buff *skb,
 {
 	void *table_base;
 	const struct ip6t_entry *root;
-	char *hookname, *chainname, *comment;
+	const char *hookname, *chainname, *comment;
 	unsigned int rulenum = 0;
 
-	table_base = (void *)private->entries[smp_processor_id()];
+	table_base = private->entries[smp_processor_id()];
 	root = get_entry(table_base, private->hook_entry[hook]);
 
-	hookname = chainname = (char *)hooknames[hook];
-	comment = (char *)comments[NF_IP6_TRACE_COMMENT_RULE];
+	hookname = chainname = hooknames[hook];
+	comment = comments[NF_IP6_TRACE_COMMENT_RULE];
 
 	IP6T_ENTRY_ITERATE(root,
 			   private->size - private->hook_entry[hook],
@@ -329,6 +329,12 @@ static void trace_packet(struct sk_buff *skb,
 }
 #endif
 
+static inline __pure struct ip6t_entry *
+ip6t_next_entry(const struct ip6t_entry *entry)
+{
+	return (void *)entry + entry->next_offset;
+}
+
 /* Returns one of the generic firewall policies, like NF_ACCEPT. */
 unsigned int
 ip6t_do_table(struct sk_buff *skb,
@@ -337,6 +343,8 @@ ip6t_do_table(struct sk_buff *skb,
 	      const struct net_device *out,
 	      struct xt_table *table)
 {
+#define tb_comefrom ((struct ip6t_entry *)table_base)->comefrom
+
 	static const char nulldevname[IFNAMSIZ] __attribute__((aligned(sizeof(long))));
 	bool hotdrop = false;
 	/* Initializing verdict to NF_DROP keeps gcc happy. */
@@ -361,7 +369,7 @@ ip6t_do_table(struct sk_buff *skb,
 	mtpar.in      = tgpar.in  = in;
 	mtpar.out     = tgpar.out = out;
 	mtpar.family  = tgpar.family = NFPROTO_IPV6;
-	tgpar.hooknum = hook;
+	mtpar.hooknum = tgpar.hooknum = hook;
 
 	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
 
@@ -375,96 +383,86 @@ ip6t_do_table(struct sk_buff *skb,
 	back = get_entry(table_base, private->underflow[hook]);
 
 	do {
+		struct ip6t_entry_target *t;
+
 		IP_NF_ASSERT(e);
 		IP_NF_ASSERT(back);
-		if (ip6_packet_match(skb, indev, outdev, &e->ipv6,
-			&mtpar.thoff, &mtpar.fragoff, &hotdrop)) {
-			struct ip6t_entry_target *t;
-
-			if (IP6T_MATCH_ITERATE(e, do_match, skb, &mtpar) != 0)
-				goto no_match;
+		if (!ip6_packet_match(skb, indev, outdev, &e->ipv6,
+		    &mtpar.thoff, &mtpar.fragoff, &hotdrop) ||
+		    IP6T_MATCH_ITERATE(e, do_match, skb, &mtpar) != 0) {
+			e = ip6t_next_entry(e);
+			continue;
+		}
 
-			ADD_COUNTER(e->counters,
-				    ntohs(ipv6_hdr(skb)->payload_len) +
-				    sizeof(struct ipv6hdr), 1);
+		ADD_COUNTER(e->counters,
+			    ntohs(ipv6_hdr(skb)->payload_len) +
+			    sizeof(struct ipv6hdr), 1);
 
-			t = ip6t_get_target(e);
-			IP_NF_ASSERT(t->u.kernel.target);
+		t = ip6t_get_target(e);
+		IP_NF_ASSERT(t->u.kernel.target);
 
 #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
     defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
-			/* The packet is traced: log it */
-			if (unlikely(skb->nf_trace))
-				trace_packet(skb, hook, in, out,
-					     table->name, private, e);
+		/* The packet is traced: log it */
+		if (unlikely(skb->nf_trace))
+			trace_packet(skb, hook, in, out,
+				     table->name, private, e);
 #endif
-			/* Standard target? */
-			if (!t->u.kernel.target->target) {
-				int v;
-
-				v = ((struct ip6t_standard_target *)t)->verdict;
-				if (v < 0) {
-					/* Pop from stack? */
-					if (v != IP6T_RETURN) {
-						verdict = (unsigned)(-v) - 1;
-						break;
-					}
-					e = back;
-					back = get_entry(table_base,
-							 back->comefrom);
-					continue;
-				}
-				if (table_base + v != (void *)e + e->next_offset
-				    && !(e->ipv6.flags & IP6T_F_GOTO)) {
-					/* Save old back ptr in next entry */
-					struct ip6t_entry *next
-						= (void *)e + e->next_offset;
-					next->comefrom
-						= (void *)back - table_base;
-					/* set back pointer to next entry */
-					back = next;
+		/* Standard target? */
+		if (!t->u.kernel.target->target) {
+			int v;
+
+			v = ((struct ip6t_standard_target *)t)->verdict;
+			if (v < 0) {
+				/* Pop from stack? */
+				if (v != IP6T_RETURN) {
+					verdict = (unsigned)(-v) - 1;
+					break;
 				}
+				e = back;
+				back = get_entry(table_base, back->comefrom);
+				continue;
+			}
+			if (table_base + v != ip6t_next_entry(e)
+			    && !(e->ipv6.flags & IP6T_F_GOTO)) {
+				/* Save old back ptr in next entry */
+				struct ip6t_entry *next = ip6t_next_entry(e);
+				next->comefrom = (void *)back - table_base;
+				/* set back pointer to next entry */
+				back = next;
+			}
 
-				e = get_entry(table_base, v);
-			} else {
-				/* Targets which reenter must return
-				   abs. verdicts */
-				tgpar.target   = t->u.kernel.target;
-				tgpar.targinfo = t->data;
+			e = get_entry(table_base, v);
+			continue;
+		}
 
-#ifdef CONFIG_NETFILTER_DEBUG
-				((struct ip6t_entry *)table_base)->comefrom
-					= 0xeeeeeeec;
-#endif
-				verdict = t->u.kernel.target->target(skb,
-								     &tgpar);
+		/* Targets which reenter must return
+		   abs. verdicts */
+		tgpar.target   = t->u.kernel.target;
+		tgpar.targinfo = t->data;
 
 #ifdef CONFIG_NETFILTER_DEBUG
-				if (((struct ip6t_entry *)table_base)->comefrom
-				    != 0xeeeeeeec
-				    && verdict == IP6T_CONTINUE) {
-					printk("Target %s reentered!\n",
-					       t->u.kernel.target->name);
-					verdict = NF_DROP;
-				}
-				((struct ip6t_entry *)table_base)->comefrom
-					= 0x57acc001;
+		tb_comefrom = 0xeeeeeeec;
 #endif
-				if (verdict == IP6T_CONTINUE)
-					e = (void *)e + e->next_offset;
-				else
-					/* Verdict */
-					break;
-			}
-		} else {
+		verdict = t->u.kernel.target->target(skb, &tgpar);
 
-		no_match:
-			e = (void *)e + e->next_offset;
+#ifdef CONFIG_NETFILTER_DEBUG
+		if (tb_comefrom != 0xeeeeeeec && verdict == IP6T_CONTINUE) {
+			printk("Target %s reentered!\n",
+			       t->u.kernel.target->name);
+			verdict = NF_DROP;
 		}
+		tb_comefrom = 0x57acc001;
+#endif
+		if (verdict == IP6T_CONTINUE)
+			e = ip6t_next_entry(e);
+		else
+			/* Verdict */
+			break;
 	} while (!hotdrop);
 
 #ifdef CONFIG_NETFILTER_DEBUG
-	((struct ip6t_entry *)table_base)->comefrom = NETFILTER_LINK_POISON;
+	tb_comefrom = NETFILTER_LINK_POISON;
 #endif
 	xt_info_rdunlock_bh();
 
@@ -475,6 +473,8 @@ ip6t_do_table(struct sk_buff *skb,
 		return NF_DROP;
 	else return verdict;
 #endif
+
+#undef tb_comefrom
 }
 
 /* Figures out from what hook each rule can be called: returns 0 if
@@ -2191,7 +2191,7 @@ static bool icmp6_checkentry(const struct xt_mtchk_param *par)
 static struct xt_target ip6t_standard_target __read_mostly = {
 	.name		= IP6T_STANDARD_TARGET,
 	.targetsize	= sizeof(int),
-	.family		= AF_INET6,
+	.family		= NFPROTO_IPV6,
 #ifdef CONFIG_COMPAT
 	.compatsize	= sizeof(compat_int_t),
 	.compat_from_user = compat_standard_from_user,
@@ -2203,7 +2203,7 @@ static struct xt_target ip6t_error_target __read_mostly = {
 	.name		= IP6T_ERROR_TARGET,
 	.target		= ip6t_error,
 	.targetsize	= IP6T_FUNCTION_MAXNAMELEN,
-	.family		= AF_INET6,
+	.family		= NFPROTO_IPV6,
 };
 
 static struct nf_sockopt_ops ip6t_sockopts = {
@@ -2229,17 +2229,17 @@ static struct xt_match icmp6_matchstruct __read_mostly = {
 	.matchsize	= sizeof(struct ip6t_icmp),
 	.checkentry	= icmp6_checkentry,
 	.proto		= IPPROTO_ICMPV6,
-	.family		= AF_INET6,
+	.family		= NFPROTO_IPV6,
 };
 
 static int __net_init ip6_tables_net_init(struct net *net)
 {
-	return xt_proto_init(net, AF_INET6);
+	return xt_proto_init(net, NFPROTO_IPV6);
 }
 
 static void __net_exit ip6_tables_net_exit(struct net *net)
 {
-	xt_proto_fini(net, AF_INET6);
+	xt_proto_fini(net, NFPROTO_IPV6);
 }
 
 static struct pernet_operations ip6_tables_net_ops = {
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index 5a2d0a41694..5a7f00cd15c 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -112,7 +112,7 @@ static void send_reset(struct net *net, struct sk_buff *oldskb)
 		return;
 	}
 
-	nskb->dst = dst;
+	skb_dst_set(nskb, dst);
 
 	skb_reserve(nskb, hh_len + dst->header_len);
 
diff --git a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
index 9903227bf37..642dcb127ba 100644
--- a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
@@ -95,18 +95,10 @@ static int icmpv6_packet(struct nf_conn *ct,
 		       u_int8_t pf,
 		       unsigned int hooknum)
 {
-	/* Try to delete connection immediately after all replies:
-	   won't actually vanish as we still have skb, and del_timer
-	   means this will only run once even if count hits zero twice
-	   (theoretically possible with SMP) */
-	if (CTINFO2DIR(ctinfo) == IP_CT_DIR_REPLY) {
-		if (atomic_dec_and_test(&ct->proto.icmp.count))
-			nf_ct_kill_acct(ct, ctinfo, skb);
-	} else {
-		atomic_inc(&ct->proto.icmp.count);
-		nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, ct);
-		nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_icmpv6_timeout);
-	}
+	/* Do not immediately delete the connection after the first
+	   successful reply to avoid excessive conntrackd traffic
+	   and also to handle correctly ICMP echo reply duplicates. */
+	nf_ct_refresh_acct(ct, ctinfo, skb, nf_ct_icmpv6_timeout);
 
 	return NF_ACCEPT;
 }
@@ -132,7 +124,6 @@ static bool icmpv6_new(struct nf_conn *ct, const struct sk_buff *skb,
 				      type + 128);
 		return false;
 	}
-	atomic_set(&ct->proto.icmp.count, 0);
 	return true;
 }
 
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 058a5e4a60c..f3aba255ad9 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -409,7 +409,7 @@ nf_ct_frag6_reasm(struct nf_ct_frag6_queue *fq, struct net_device *dev)
 	/* If the first fragment is fragmented itself, we split
 	 * it to two chunks: the first with data and paged part
 	 * and the second, holding only fragments. */
-	if (skb_shinfo(head)->frag_list) {
+	if (skb_has_frags(head)) {
 		struct sk_buff *clone;
 		int i, plen = 0;
 
@@ -420,7 +420,7 @@ nf_ct_frag6_reasm(struct nf_ct_frag6_queue *fq, struct net_device *dev)
 		clone->next = head->next;
 		head->next = clone;
 		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
-		skb_shinfo(head)->frag_list = NULL;
+		skb_frag_list_init(head);
 		for (i=0; i<skb_shinfo(head)->nr_frags; i++)
 			plen += skb_shinfo(head)->frags[i].size;
 		clone->len = clone->data_len = head->data_len - plen;
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 97c17fdd6f7..590ddefb7ff 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -61,7 +61,7 @@ static const struct file_operations sockstat6_seq_fops = {
 
 static struct snmp_mib snmp6_ipstats_list[] = {
 /* ipv6 mib according to RFC 2465 */
-	SNMP_MIB_ITEM("Ip6InReceives", IPSTATS_MIB_INRECEIVES),
+	SNMP_MIB_ITEM("Ip6InReceives", IPSTATS_MIB_INPKTS),
 	SNMP_MIB_ITEM("Ip6InHdrErrors", IPSTATS_MIB_INHDRERRORS),
 	SNMP_MIB_ITEM("Ip6InTooBigErrors", IPSTATS_MIB_INTOOBIGERRORS),
 	SNMP_MIB_ITEM("Ip6InNoRoutes", IPSTATS_MIB_INNOROUTES),
@@ -71,7 +71,7 @@ static struct snmp_mib snmp6_ipstats_list[] = {
 	SNMP_MIB_ITEM("Ip6InDiscards", IPSTATS_MIB_INDISCARDS),
 	SNMP_MIB_ITEM("Ip6InDelivers", IPSTATS_MIB_INDELIVERS),
 	SNMP_MIB_ITEM("Ip6OutForwDatagrams", IPSTATS_MIB_OUTFORWDATAGRAMS),
-	SNMP_MIB_ITEM("Ip6OutRequests", IPSTATS_MIB_OUTREQUESTS),
+	SNMP_MIB_ITEM("Ip6OutRequests", IPSTATS_MIB_OUTPKTS),
 	SNMP_MIB_ITEM("Ip6OutDiscards", IPSTATS_MIB_OUTDISCARDS),
 	SNMP_MIB_ITEM("Ip6OutNoRoutes", IPSTATS_MIB_OUTNOROUTES),
 	SNMP_MIB_ITEM("Ip6ReasmTimeout", IPSTATS_MIB_REASMTIMEOUT),
@@ -83,6 +83,12 @@ static struct snmp_mib snmp6_ipstats_list[] = {
 	SNMP_MIB_ITEM("Ip6FragCreates", IPSTATS_MIB_FRAGCREATES),
 	SNMP_MIB_ITEM("Ip6InMcastPkts", IPSTATS_MIB_INMCASTPKTS),
 	SNMP_MIB_ITEM("Ip6OutMcastPkts", IPSTATS_MIB_OUTMCASTPKTS),
+	SNMP_MIB_ITEM("Ip6InOctets", IPSTATS_MIB_INOCTETS),
+	SNMP_MIB_ITEM("Ip6OutOctets", IPSTATS_MIB_OUTOCTETS),
+	SNMP_MIB_ITEM("Ip6InMcastOctets", IPSTATS_MIB_INMCASTOCTETS),
+	SNMP_MIB_ITEM("Ip6OutMcastOctets", IPSTATS_MIB_OUTMCASTOCTETS),
+	SNMP_MIB_ITEM("Ip6InBcastOctets", IPSTATS_MIB_INBCASTOCTETS),
+	SNMP_MIB_ITEM("Ip6OutBcastOctets", IPSTATS_MIB_OUTBCASTOCTETS),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 61f6827e590..36a090d87a3 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -625,7 +625,7 @@ static int rawv6_send_hdrinc(struct sock *sk, void *from, int length,
 
 	skb->priority = sk->sk_priority;
 	skb->mark = sk->sk_mark;
-	skb->dst = dst_clone(&rt->u.dst);
+	skb_dst_set(skb, dst_clone(&rt->u.dst));
 
 	skb_put(skb, length);
 	skb_reset_network_header(skb);
@@ -638,7 +638,7 @@ static int rawv6_send_hdrinc(struct sock *sk, void *from, int length,
 	if (err)
 		goto error_fault;
 
-	IP6_INC_STATS(sock_net(sk), rt->rt6i_idev, IPSTATS_MIB_OUTREQUESTS);
+	IP6_UPD_PO_STATS(sock_net(sk), rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
 	err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, rt->u.dst.dev,
 		      dst_output);
 	if (err > 0)
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index e9ac7a12f59..2642a41a853 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -267,7 +267,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
 	struct sk_buff *prev, *next;
 	struct net_device *dev;
 	int offset, end;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	if (fq->q.last_in & INET_FRAG_COMPLETE)
 		goto err;
@@ -277,7 +277,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
 			((u8 *)(fhdr + 1) - (u8 *)(ipv6_hdr(skb) + 1)));
 
 	if ((unsigned int)end > IPV6_MAXPLEN) {
-		IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 				 IPSTATS_MIB_INHDRERRORS);
 		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 				  ((u8 *)&fhdr->frag_off -
@@ -310,7 +310,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
 			/* RFC2460 says always send parameter problem in
 			 * this case. -DaveM
 			 */
-			IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst),
+			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
 					 IPSTATS_MIB_INHDRERRORS);
 			icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
 					  offsetof(struct ipv6hdr, payload_len));
@@ -434,7 +434,7 @@ static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
 	return -1;
 
 err:
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst),
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
 		      IPSTATS_MIB_REASMFAILS);
 	kfree_skb(skb);
 	return -1;
@@ -494,7 +494,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 	/* If the first fragment is fragmented itself, we split
 	 * it to two chunks: the first with data and paged part
 	 * and the second, holding only fragments. */
-	if (skb_shinfo(head)->frag_list) {
+	if (skb_has_frags(head)) {
 		struct sk_buff *clone;
 		int i, plen = 0;
 
@@ -503,7 +503,7 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 		clone->next = head->next;
 		head->next = clone;
 		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
-		skb_shinfo(head)->frag_list = NULL;
+		skb_frag_list_init(head);
 		for (i=0; i<skb_shinfo(head)->nr_frags; i++)
 			plen += skb_shinfo(head)->frags[i].size;
 		clone->len = clone->data_len = head->data_len - plen;
@@ -576,9 +576,9 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
 	struct frag_hdr *fhdr;
 	struct frag_queue *fq;
 	struct ipv6hdr *hdr = ipv6_hdr(skb);
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 
-	IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMREQDS);
+	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMREQDS);
 
 	/* Jumbo payload inhibits frag. header */
 	if (hdr->payload_len==0)
@@ -595,17 +595,17 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
 		/* It is not a fragmented frame */
 		skb->transport_header += sizeof(struct frag_hdr);
 		IP6_INC_STATS_BH(net,
-				 ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMOKS);
+				 ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMOKS);
 
 		IP6CB(skb)->nhoff = (u8 *)fhdr - skb_network_header(skb);
 		return 1;
 	}
 
 	if (atomic_read(&net->ipv6.frags.mem) > net->ipv6.frags.high_thresh)
-		ip6_evictor(net, ip6_dst_idev(skb->dst));
+		ip6_evictor(net, ip6_dst_idev(skb_dst(skb)));
 
 	if ((fq = fq_find(net, fhdr->identification, &hdr->saddr, &hdr->daddr,
-			  ip6_dst_idev(skb->dst))) != NULL) {
+			  ip6_dst_idev(skb_dst(skb)))) != NULL) {
 		int ret;
 
 		spin_lock(&fq->q.lock);
@@ -617,12 +617,12 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
 		return ret;
 	}
 
-	IP6_INC_STATS_BH(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_REASMFAILS);
+	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMFAILS);
 	kfree_skb(skb);
 	return -1;
 
 fail_hdr:
-	IP6_INC_STATS(net, ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
+	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INHDRERRORS);
 	icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, skb_network_header_len(skb));
 	return -1;
 }
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 032a5ec391c..658293ea05b 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -800,7 +800,7 @@ void ip6_route_input(struct sk_buff *skb)
 	if (rt6_need_strict(&iph->daddr) && skb->dev->type != ARPHRD_PIMREG)
 		flags |= RT6_LOOKUP_F_IFACE;
 
-	skb->dst = fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input);
+	skb_dst_set(skb, fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input));
 }
 
 static struct rt6_info *ip6_pol_route_output(struct net *net, struct fib6_table *table,
@@ -911,7 +911,7 @@ static void ip6_link_failure(struct sk_buff *skb)
 
 	icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0, skb->dev);
 
-	rt = (struct rt6_info *) skb->dst;
+	rt = (struct rt6_info *) skb_dst(skb);
 	if (rt) {
 		if (rt->rt6i_flags&RTF_CACHE) {
 			dst_set_expires(&rt->u.dst, 0);
@@ -1868,7 +1868,7 @@ int ipv6_route_ioctl(struct net *net, unsigned int cmd, void __user *arg)
 static int ip6_pkt_drop(struct sk_buff *skb, int code, int ipstats_mib_noroutes)
 {
 	int type;
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	switch (ipstats_mib_noroutes) {
 	case IPSTATS_MIB_INNOROUTES:
 		type = ipv6_addr_type(&ipv6_hdr(skb)->daddr);
@@ -1895,7 +1895,7 @@ static int ip6_pkt_discard(struct sk_buff *skb)
 
 static int ip6_pkt_discard_out(struct sk_buff *skb)
 {
-	skb->dev = skb->dst->dev;
+	skb->dev = skb_dst(skb)->dev;
 	return ip6_pkt_drop(skb, ICMPV6_NOROUTE, IPSTATS_MIB_OUTNOROUTES);
 }
 
@@ -1908,7 +1908,7 @@ static int ip6_pkt_prohibit(struct sk_buff *skb)
 
 static int ip6_pkt_prohibit_out(struct sk_buff *skb)
 {
-	skb->dev = skb->dst->dev;
+	skb->dev = skb_dst(skb)->dev;
 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
 }
 
@@ -2366,7 +2366,7 @@ static int inet6_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 	skb_reserve(skb, MAX_HEADER + sizeof(struct ipv6hdr));
 
 	rt = (struct rt6_info*) ip6_route_output(net, NULL, &fl);
-	skb->dst = &rt->u.dst;
+	skb_dst_set(skb, &rt->u.dst);
 
 	err = rt6_fill_node(net, skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
 			    RTM_NEWROUTE, NETLINK_CB(in_skb).pid,
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 664ab82e03b..68e52308e55 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -15,6 +15,7 @@
  * Roger Venning <r.venning@telstra.com>:	6to4 support
  * Nate Thompson <nate@thebog.net>:		6to4 support
  * Fred Templin <fred.l.templin@boeing.com>:	isatap support
+ * Sascha Hlusiak <mail@saschahlusiak.de>:	stateless autoconf for isatap
  */
 
 #include <linux/module.h>
@@ -80,7 +81,7 @@ struct sit_net {
 static DEFINE_RWLOCK(ipip6_lock);
 
 static struct ip_tunnel * ipip6_tunnel_lookup(struct net *net,
-		__be32 remote, __be32 local)
+		struct net_device *dev, __be32 remote, __be32 local)
 {
 	unsigned h0 = HASH(remote);
 	unsigned h1 = HASH(local);
@@ -89,18 +90,25 @@ static struct ip_tunnel * ipip6_tunnel_lookup(struct net *net,
 
 	for (t = sitn->tunnels_r_l[h0^h1]; t; t = t->next) {
 		if (local == t->parms.iph.saddr &&
-		    remote == t->parms.iph.daddr && (t->dev->flags&IFF_UP))
+		    remote == t->parms.iph.daddr &&
+		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (t->dev->flags & IFF_UP))
 			return t;
 	}
 	for (t = sitn->tunnels_r[h0]; t; t = t->next) {
-		if (remote == t->parms.iph.daddr && (t->dev->flags&IFF_UP))
+		if (remote == t->parms.iph.daddr &&
+		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (t->dev->flags & IFF_UP))
 			return t;
 	}
 	for (t = sitn->tunnels_l[h1]; t; t = t->next) {
-		if (local == t->parms.iph.saddr && (t->dev->flags&IFF_UP))
+		if (local == t->parms.iph.saddr &&
+		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	if ((t = sitn->tunnels_wc[0]) != NULL && (t->dev->flags&IFF_UP))
+	t = sitn->tunnels_wc[0];
+	if ((t != NULL) && (t->dev->flags & IFF_UP))
 		return t;
 	return NULL;
 }
@@ -165,8 +173,14 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct net *net,
 	struct sit_net *sitn = net_generic(net, sit_net_id);
 
 	for (tp = __ipip6_bucket(sitn, parms); (t = *tp) != NULL; tp = &t->next) {
-		if (local == t->parms.iph.saddr && remote == t->parms.iph.daddr)
-			return t;
+		if (local == t->parms.iph.saddr &&
+		    remote == t->parms.iph.daddr &&
+		    parms->link == t->parms.link) {
+			if (create)
+				return NULL;
+			else
+				return t;
+		}
 	}
 	if (!create)
 		goto failed;
@@ -209,6 +223,44 @@ failed:
 	return NULL;
 }
 
+static void ipip6_tunnel_rs_timer(unsigned long data)
+{
+	struct ip_tunnel_prl_entry *p = (struct ip_tunnel_prl_entry *) data;
+	struct inet6_dev *ifp;
+	struct inet6_ifaddr *addr;
+
+	spin_lock(&p->lock);
+	ifp = __in6_dev_get(p->tunnel->dev);
+
+	read_lock_bh(&ifp->lock);
+	for (addr = ifp->addr_list; addr; addr = addr->if_next) {
+		struct in6_addr rtr;
+
+		if (!(ipv6_addr_type(&addr->addr) & IPV6_ADDR_LINKLOCAL))
+			continue;
+
+		/* Send RS to guessed linklocal address of router
+		 *
+		 * Better: send to ff02::2 encapsuled in unicast directly
+		 * to router-v4 instead of guessing the v6 address.
+		 *
+		 * Cisco/Windows seem to not set the u/l bit correctly,
+		 * so we won't guess right.
+		 */
+		ipv6_addr_set(&rtr,  htonl(0xFE800000), 0, 0, 0);
+		if (!__ipv6_isatap_ifid(rtr.s6_addr + 8,
+					p->addr)) {
+			ndisc_send_rs(p->tunnel->dev, &addr->addr, &rtr);
+		}
+	}
+	read_unlock_bh(&ifp->lock);
+
+	mod_timer(&p->rs_timer, jiffies + HZ * p->rs_delay);
+	spin_unlock(&p->lock);
+
+	return;
+}
+
 static struct ip_tunnel_prl_entry *
 __ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr)
 {
@@ -267,6 +319,7 @@ static int ipip6_tunnel_get_prl(struct ip_tunnel *t,
 			continue;
 		kp[c].addr = prl->addr;
 		kp[c].flags = prl->flags;
+		kp[c].rs_delay = prl->rs_delay;
 		c++;
 		if (kprl.addr != htonl(INADDR_ANY))
 			break;
@@ -316,11 +369,23 @@ ipip6_tunnel_add_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a, int chg)
 	}
 
 	p->next = t->prl;
+	p->tunnel = t;
 	t->prl = p;
 	t->prl_count++;
+
+	spin_lock_init(&p->lock);
+	setup_timer(&p->rs_timer, ipip6_tunnel_rs_timer, (unsigned long) p);
 update:
 	p->addr = a->addr;
 	p->flags = a->flags;
+	p->rs_delay = a->rs_delay;
+	if (p->rs_delay == 0)
+		p->rs_delay = IPTUNNEL_RS_DEFAULT_DELAY;
+	spin_lock(&p->lock);
+	del_timer(&p->rs_timer);
+	if (p->flags & PRL_DEFAULT)
+		mod_timer(&p->rs_timer, jiffies + 1);
+	spin_unlock(&p->lock);
 out:
 	write_unlock(&ipip6_lock);
 	return err;
@@ -339,6 +404,9 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 			if ((*p)->addr == a->addr) {
 				x = *p;
 				*p = x->next;
+				spin_lock(&x->lock);
+				del_timer(&x->rs_timer);
+				spin_unlock(&x->lock);
 				kfree(x);
 				t->prl_count--;
 				goto out;
@@ -349,13 +417,16 @@ ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 		while (t->prl) {
 			x = t->prl;
 			t->prl = t->prl->next;
+			spin_lock(&x->lock);
+			del_timer(&x->rs_timer);
+			spin_unlock(&x->lock);
 			kfree(x);
 			t->prl_count--;
 		}
 	}
 out:
 	write_unlock(&ipip6_lock);
-	return 0;
+	return err;
 }
 
 static int
@@ -446,7 +517,10 @@ static int ipip6_err(struct sk_buff *skb, u32 info)
 	err = -ENOENT;
 
 	read_lock(&ipip6_lock);
-	t = ipip6_tunnel_lookup(dev_net(skb->dev), iph->daddr, iph->saddr);
+	t = ipip6_tunnel_lookup(dev_net(skb->dev),
+				skb->dev,
+				iph->daddr,
+				iph->saddr);
 	if (t == NULL || t->parms.iph.daddr == 0)
 		goto out;
 
@@ -481,8 +555,9 @@ static int ipip6_rcv(struct sk_buff *skb)
 	iph = ip_hdr(skb);
 
 	read_lock(&ipip6_lock);
-	if ((tunnel = ipip6_tunnel_lookup(dev_net(skb->dev),
-					iph->saddr, iph->daddr)) != NULL) {
+	tunnel = ipip6_tunnel_lookup(dev_net(skb->dev), skb->dev,
+				     iph->saddr, iph->daddr);
+	if (tunnel != NULL) {
 		secpath_reset(skb);
 		skb->mac_header = skb->network_header;
 		skb_reset_network_header(skb);
@@ -500,8 +575,7 @@ static int ipip6_rcv(struct sk_buff *skb)
 		tunnel->dev->stats.rx_packets++;
 		tunnel->dev->stats.rx_bytes += skb->len;
 		skb->dev = tunnel->dev;
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		nf_reset(skb);
 		ipip6_ecn_decapsulate(iph, skb);
 		netif_rx(skb);
@@ -563,8 +637,8 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (dev->priv_flags & IFF_ISATAP) {
 		struct neighbour *neigh = NULL;
 
-		if (skb->dst)
-			neigh = skb->dst->neighbour;
+		if (skb_dst(skb))
+			neigh = skb_dst(skb)->neighbour;
 
 		if (neigh == NULL) {
 			if (net_ratelimit())
@@ -588,8 +662,8 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!dst) {
 		struct neighbour *neigh = NULL;
 
-		if (skb->dst)
-			neigh = skb->dst->neighbour;
+		if (skb_dst(skb))
+			neigh = skb_dst(skb)->neighbour;
 
 		if (neigh == NULL) {
 			if (net_ratelimit())
@@ -639,7 +713,7 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (tiph->frag_off)
 		mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr);
 	else
-		mtu = skb->dst ? dst_mtu(skb->dst) : dev->mtu;
+		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
 	if (mtu < 68) {
 		stats->collisions++;
@@ -648,8 +722,8 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 	if (mtu < IPV6_MIN_MTU)
 		mtu = IPV6_MIN_MTU;
-	if (tunnel->parms.iph.daddr && skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (tunnel->parms.iph.daddr && skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	if (skb->len > mtu) {
 		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, dev);
@@ -693,8 +767,8 @@ static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_reset_network_header(skb);
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 	IPCB(skb)->flags = 0;
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 711175e0571..8c2513982b6 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -131,7 +131,7 @@ __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mssp)
 	int mssind;
 	const __u16 mss = *mssp;
 
-	tcp_sk(sk)->last_synq_overflow = jiffies;
+	tcp_synq_overflow(sk);
 
 	for (mssind = 0; mss > msstab[mssind + 1]; mssind++)
 		;
@@ -175,7 +175,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 	if (!sysctl_tcp_syncookies || !th->ack)
 		goto out;
 
-	if (time_after(jiffies, tp->last_synq_overflow + TCP_TIMEOUT_INIT) ||
+	if (tcp_synq_no_recent_overflow(sk) ||
 		(mss = cookie_check(skb, cookie)) == 0) {
 		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_SYNCOOKIESFAILED);
 		goto out;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 4b5aa185426..53b6a4192b1 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -941,9 +941,10 @@ static int tcp_v6_gso_send_check(struct sk_buff *skb)
 	return 0;
 }
 
-struct sk_buff **tcp6_gro_receive(struct sk_buff **head, struct sk_buff *skb)
+static struct sk_buff **tcp6_gro_receive(struct sk_buff **head,
+					 struct sk_buff *skb)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	struct ipv6hdr *iph = skb_gro_network_header(skb);
 
 	switch (skb->ip_summed) {
 	case CHECKSUM_COMPLETE:
@@ -961,9 +962,8 @@ struct sk_buff **tcp6_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 
 	return tcp_gro_receive(head, skb);
 }
-EXPORT_SYMBOL(tcp6_gro_receive);
 
-int tcp6_gro_complete(struct sk_buff *skb)
+static int tcp6_gro_complete(struct sk_buff *skb)
 {
 	struct ipv6hdr *iph = ipv6_hdr(skb);
 	struct tcphdr *th = tcp_hdr(skb);
@@ -974,7 +974,6 @@ int tcp6_gro_complete(struct sk_buff *skb)
 
 	return tcp_gro_complete(skb);
 }
-EXPORT_SYMBOL(tcp6_gro_complete);
 
 static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win,
 				 u32 ts, struct tcp_md5sig_key *key, int rst)
@@ -982,9 +981,10 @@ static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win,
 	struct tcphdr *th = tcp_hdr(skb), *t1;
 	struct sk_buff *buff;
 	struct flowi fl;
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 	struct sock *ctl_sk = net->ipv6.tcp_sk;
 	unsigned int tot_len = sizeof(struct tcphdr);
+	struct dst_entry *dst;
 	__be32 *topt;
 
 	if (ts)
@@ -1053,8 +1053,9 @@ static void tcp_v6_send_response(struct sk_buff *skb, u32 seq, u32 ack, u32 win,
 	 * Underlying function will use this to retrieve the network
 	 * namespace
 	 */
-	if (!ip6_dst_lookup(ctl_sk, &buff->dst, &fl)) {
-		if (xfrm_lookup(net, &buff->dst, &fl, NULL, 0) >= 0) {
+	if (!ip6_dst_lookup(ctl_sk, &dst, &fl)) {
+		if (xfrm_lookup(net, &dst, &fl, NULL, 0) >= 0) {
+			skb_dst_set(buff, dst);
 			ip6_xmit(ctl_sk, buff, &fl, NULL, 0);
 			TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS);
 			if (rst)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 8905712cfbb..fc333d85472 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -177,10 +177,9 @@ static struct sock *__udp6_lib_lookup_skb(struct sk_buff *skb,
 
 	if (unlikely(sk = skb_steal_sock(skb)))
 		return sk;
-	else
-		return __udp6_lib_lookup(dev_net(skb->dst->dev), &iph->saddr, sport,
-					 &iph->daddr, dport, inet6_iif(skb),
-					 udptable);
+	return __udp6_lib_lookup(dev_net(skb_dst(skb)->dev), &iph->saddr, sport,
+				 &iph->daddr, dport, inet6_iif(skb),
+				 udptable);
 }
 
 /*
diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c
index e20529b4c82..3927832227b 100644
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -31,7 +31,7 @@ static inline void ipip6_ecn_decapsulate(struct sk_buff *skb)
  */
 static int xfrm6_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct ipv6hdr *top_iph;
 	int dsfield;
 
@@ -45,7 +45,7 @@ static int xfrm6_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 
 	memcpy(top_iph->flow_lbl, XFRM_MODE_SKB_CB(skb)->flow_lbl,
 	       sizeof(top_iph->flow_lbl));
-	top_iph->nexthdr = xfrm_af2proto(skb->dst->ops->family);
+	top_iph->nexthdr = xfrm_af2proto(skb_dst(skb)->ops->family);
 
 	dsfield = XFRM_MODE_SKB_CB(skb)->tos;
 	dsfield = INET_ECN_encapsulate(dsfield, dsfield);
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 5ee5a031bc9..c4f4eef032a 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -30,7 +30,7 @@ EXPORT_SYMBOL(xfrm6_find_1stfragopt);
 static int xfrm6_tunnel_check_size(struct sk_buff *skb)
 {
 	int mtu, ret = 0;
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 
 	mtu = dst_mtu(dst);
 	if (mtu < IPV6_MIN_MTU)
@@ -90,6 +90,6 @@ static int xfrm6_output_finish(struct sk_buff *skb)
 
 int xfrm6_output(struct sk_buff *skb)
 {
-	return NF_HOOK(PF_INET6, NF_INET_POST_ROUTING, skb, NULL, skb->dst->dev,
+	return NF_HOOK(PF_INET6, NF_INET_POST_ROUTING, skb, NULL, skb_dst(skb)->dev,
 		       xfrm6_output_finish);
 }
diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c
index 2562ebc1b22..7af2e74deda 100644
--- a/net/irda/irlap_frame.c
+++ b/net/irda/irlap_frame.c
@@ -982,17 +982,12 @@ void irlap_resend_rejected_frames(struct irlap_cb *self, int command)
 {
 	struct sk_buff *tx_skb;
 	struct sk_buff *skb;
-	int count;
 
 	IRDA_ASSERT(self != NULL, return;);
 	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
 
-	/* Initialize variables */
-	count = skb_queue_len(&self->wx_list);
-
 	/*  Resend unacknowledged frame(s) */
-	skb = skb_peek(&self->wx_list);
-	while (skb != NULL) {
+	skb_queue_walk(&self->wx_list, skb) {
 		irlap_wait_min_turn_around(self, &self->qos_tx);
 
 		/* We copy the skb to be retransmitted since we will have to
@@ -1011,21 +1006,12 @@ void irlap_resend_rejected_frames(struct irlap_cb *self, int command)
 		/*
 		 *  Set poll bit on the last frame retransmitted
 		 */
-		if (count-- == 1)
+		if (skb_queue_is_last(&self->wx_list, skb))
 			tx_skb->data[1] |= PF_BIT; /* Set p/f bit */
 		else
 			tx_skb->data[1] &= ~PF_BIT; /* Clear p/f bit */
 
 		irlap_send_i_frame(self, tx_skb, command);
-
-		/*
-		 *  If our skb is the last buffer in the list, then
-		 *  we are finished, if not, move to the next sk-buffer
-		 */
-		if (skb == skb_peek_tail(&self->wx_list))
-			skb = NULL;
-		else
-			skb = skb->next;
 	}
 #if 0 /* Not yet */
 	/*
diff --git a/net/irda/irnetlink.c b/net/irda/irnetlink.c
index 2f05ec1037a..8dd7ed7e7c1 100644
--- a/net/irda/irnetlink.c
+++ b/net/irda/irnetlink.c
@@ -87,7 +87,7 @@ static int irda_nl_get_mode(struct sk_buff *skb, struct genl_info *info)
 	if (!dev)
 		return -ENODEV;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		dev_put(dev);
 		return -ENOMEM;
@@ -148,21 +148,8 @@ static struct genl_ops irda_nl_ops[] = {
 
 int irda_nl_register(void)
 {
-	int err, i;
-
-	err = genl_register_family(&irda_nl_family);
-	if (err)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(irda_nl_ops); i++) {
-		err = genl_register_ops(&irda_nl_family, &irda_nl_ops[i]);
-		if (err)
-			goto err_out;
-	}
-	return 0;
- err_out:
-	genl_unregister_family(&irda_nl_family);
-	return err;
+	return genl_register_family_with_ops(&irda_nl_family,
+		irda_nl_ops, ARRAY_SIZE(irda_nl_ops));
 }
 
 void irda_nl_unregister(void)
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index b51c9187c34..656cbd19582 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -1,11 +1,12 @@
 /*
- *  linux/net/iucv/af_iucv.c
- *
  *  IUCV protocol stack for Linux on zSeries
  *
- *  Copyright 2006 IBM Corporation
+ *  Copyright IBM Corp. 2006, 2009
  *
  *  Author(s):	Jennifer Hunt <jenhunt@us.ibm.com>
+ *		Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+ *  PM functions:
+ *		Ursula Braun <ursula.braun@de.ibm.com>
  */
 
 #define KMSG_COMPONENT "af_iucv"
@@ -29,10 +30,7 @@
 #include <net/iucv/iucv.h>
 #include <net/iucv/af_iucv.h>
 
-#define CONFIG_IUCV_SOCK_DEBUG 1
-
-#define IPRMDATA 0x80
-#define VERSION "1.0"
+#define VERSION "1.1"
 
 static char iucv_userid[80];
 
@@ -44,6 +42,19 @@ static struct proto iucv_proto = {
 	.obj_size	= sizeof(struct iucv_sock),
 };
 
+/* special AF_IUCV IPRM messages */
+static const u8 iprm_shutdown[8] =
+	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01};
+
+#define TRGCLS_SIZE	(sizeof(((struct iucv_message *)0)->class))
+
+/* macros to set/get socket control buffer at correct offset */
+#define CB_TAG(skb)	((skb)->cb)		/* iucv message tag */
+#define CB_TAG_LEN	(sizeof(((struct iucv_message *) 0)->tag))
+#define CB_TRGCLS(skb)	((skb)->cb + CB_TAG_LEN) /* iucv msg target class */
+#define CB_TRGCLS_LEN	(TRGCLS_SIZE)
+
+
 static void iucv_sock_kill(struct sock *sk);
 static void iucv_sock_close(struct sock *sk);
 
@@ -54,6 +65,7 @@ static void iucv_callback_connack(struct iucv_path *, u8 ipuser[16]);
 static int iucv_callback_connreq(struct iucv_path *, u8 ipvmid[8],
 				 u8 ipuser[16]);
 static void iucv_callback_connrej(struct iucv_path *, u8 ipuser[16]);
+static void iucv_callback_shutdown(struct iucv_path *, u8 ipuser[16]);
 
 static struct iucv_sock_list iucv_sk_list = {
 	.lock = __RW_LOCK_UNLOCKED(iucv_sk_list.lock),
@@ -65,7 +77,8 @@ static struct iucv_handler af_iucv_handler = {
 	.path_complete	  = iucv_callback_connack,
 	.path_severed	  = iucv_callback_connrej,
 	.message_pending  = iucv_callback_rx,
-	.message_complete = iucv_callback_txdone
+	.message_complete = iucv_callback_txdone,
+	.path_quiesced	  = iucv_callback_shutdown,
 };
 
 static inline void high_nmcpy(unsigned char *dst, char *src)
@@ -78,6 +91,153 @@ static inline void low_nmcpy(unsigned char *dst, char *src)
        memcpy(&dst[8], src, 8);
 }
 
+static int afiucv_pm_prepare(struct device *dev)
+{
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "afiucv_pm_prepare\n");
+#endif
+	return 0;
+}
+
+static void afiucv_pm_complete(struct device *dev)
+{
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "afiucv_pm_complete\n");
+#endif
+	return;
+}
+
+/**
+ * afiucv_pm_freeze() - Freeze PM callback
+ * @dev:	AFIUCV dummy device
+ *
+ * Sever all established IUCV communication pathes
+ */
+static int afiucv_pm_freeze(struct device *dev)
+{
+	struct iucv_sock *iucv;
+	struct sock *sk;
+	struct hlist_node *node;
+	int err = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "afiucv_pm_freeze\n");
+#endif
+	read_lock(&iucv_sk_list.lock);
+	sk_for_each(sk, node, &iucv_sk_list.head) {
+		iucv = iucv_sk(sk);
+		skb_queue_purge(&iucv->send_skb_q);
+		skb_queue_purge(&iucv->backlog_skb_q);
+		switch (sk->sk_state) {
+		case IUCV_SEVERED:
+		case IUCV_DISCONN:
+		case IUCV_CLOSING:
+		case IUCV_CONNECTED:
+			if (iucv->path) {
+				err = iucv_path_sever(iucv->path, NULL);
+				iucv_path_free(iucv->path);
+				iucv->path = NULL;
+			}
+			break;
+		case IUCV_OPEN:
+		case IUCV_BOUND:
+		case IUCV_LISTEN:
+		case IUCV_CLOSED:
+		default:
+			break;
+		}
+	}
+	read_unlock(&iucv_sk_list.lock);
+	return err;
+}
+
+/**
+ * afiucv_pm_restore_thaw() - Thaw and restore PM callback
+ * @dev:	AFIUCV dummy device
+ *
+ * socket clean up after freeze
+ */
+static int afiucv_pm_restore_thaw(struct device *dev)
+{
+	struct iucv_sock *iucv;
+	struct sock *sk;
+	struct hlist_node *node;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "afiucv_pm_restore_thaw\n");
+#endif
+	read_lock(&iucv_sk_list.lock);
+	sk_for_each(sk, node, &iucv_sk_list.head) {
+		iucv = iucv_sk(sk);
+		switch (sk->sk_state) {
+		case IUCV_CONNECTED:
+			sk->sk_err = EPIPE;
+			sk->sk_state = IUCV_DISCONN;
+			sk->sk_state_change(sk);
+			break;
+		case IUCV_DISCONN:
+		case IUCV_SEVERED:
+		case IUCV_CLOSING:
+		case IUCV_LISTEN:
+		case IUCV_BOUND:
+		case IUCV_OPEN:
+		default:
+			break;
+		}
+	}
+	read_unlock(&iucv_sk_list.lock);
+	return 0;
+}
+
+static struct dev_pm_ops afiucv_pm_ops = {
+	.prepare = afiucv_pm_prepare,
+	.complete = afiucv_pm_complete,
+	.freeze = afiucv_pm_freeze,
+	.thaw = afiucv_pm_restore_thaw,
+	.restore = afiucv_pm_restore_thaw,
+};
+
+static struct device_driver af_iucv_driver = {
+	.owner = THIS_MODULE,
+	.name = "afiucv",
+	.bus  = &iucv_bus,
+	.pm   = &afiucv_pm_ops,
+};
+
+/* dummy device used as trigger for PM functions */
+static struct device *af_iucv_dev;
+
+/**
+ * iucv_msg_length() - Returns the length of an iucv message.
+ * @msg:	Pointer to struct iucv_message, MUST NOT be NULL
+ *
+ * The function returns the length of the specified iucv message @msg of data
+ * stored in a buffer and of data stored in the parameter list (PRMDATA).
+ *
+ * For IUCV_IPRMDATA, AF_IUCV uses the following convention to transport socket
+ * data:
+ *	PRMDATA[0..6]	socket data (max 7 bytes);
+ *	PRMDATA[7]	socket data length value (len is 0xff - PRMDATA[7])
+ *
+ * The socket data length is computed by substracting the socket data length
+ * value from 0xFF.
+ * If the socket data len is greater 7, then PRMDATA can be used for special
+ * notifications (see iucv_sock_shutdown); and further,
+ * if the socket data len is > 7, the function returns 8.
+ *
+ * Use this function to allocate socket buffers to store iucv message data.
+ */
+static inline size_t iucv_msg_length(struct iucv_message *msg)
+{
+	size_t datalen;
+
+	if (msg->flags & IUCV_IPRMDATA) {
+		datalen = 0xff - msg->rmmsg[7];
+		return (datalen < 8) ? datalen : 8;
+	}
+	return msg->length;
+}
+
 /* Timers */
 static void iucv_sock_timeout(unsigned long arg)
 {
@@ -225,6 +385,8 @@ static struct sock *iucv_sock_alloc(struct socket *sock, int proto, gfp_t prio)
 	spin_lock_init(&iucv_sk(sk)->message_q.lock);
 	skb_queue_head_init(&iucv_sk(sk)->backlog_skb_q);
 	iucv_sk(sk)->send_tag = 0;
+	iucv_sk(sk)->flags = 0;
+	iucv_sk(sk)->msglimit = IUCV_QUEUELEN_DEFAULT;
 	iucv_sk(sk)->path = NULL;
 	memset(&iucv_sk(sk)->src_user_id , 0, 32);
 
@@ -248,11 +410,22 @@ static int iucv_sock_create(struct net *net, struct socket *sock, int protocol)
 {
 	struct sock *sk;
 
-	if (sock->type != SOCK_STREAM)
-		return -ESOCKTNOSUPPORT;
+	if (protocol && protocol != PF_IUCV)
+		return -EPROTONOSUPPORT;
 
 	sock->state = SS_UNCONNECTED;
-	sock->ops = &iucv_sock_ops;
+
+	switch (sock->type) {
+	case SOCK_STREAM:
+		sock->ops = &iucv_sock_ops;
+		break;
+	case SOCK_SEQPACKET:
+		/* currently, proto ops can handle both sk types */
+		sock->ops = &iucv_sock_ops;
+		break;
+	default:
+		return -ESOCKTNOSUPPORT;
+	}
 
 	sk = iucv_sock_alloc(sock, protocol, GFP_KERNEL);
 	if (!sk)
@@ -463,11 +636,9 @@ static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr,
 	if (sk->sk_state != IUCV_OPEN && sk->sk_state != IUCV_BOUND)
 		return -EBADFD;
 
-	if (sk->sk_type != SOCK_STREAM)
+	if (sk->sk_type != SOCK_STREAM && sk->sk_type != SOCK_SEQPACKET)
 		return -EINVAL;
 
-	iucv = iucv_sk(sk);
-
 	if (sk->sk_state == IUCV_OPEN) {
 		err = iucv_sock_autobind(sk);
 		if (unlikely(err))
@@ -486,8 +657,8 @@ static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr,
 
 	iucv = iucv_sk(sk);
 	/* Create path. */
-	iucv->path = iucv_path_alloc(IUCV_QUEUELEN_DEFAULT,
-				     IPRMDATA, GFP_KERNEL);
+	iucv->path = iucv_path_alloc(iucv->msglimit,
+				     IUCV_IPRMDATA, GFP_KERNEL);
 	if (!iucv->path) {
 		err = -ENOMEM;
 		goto done;
@@ -521,8 +692,7 @@ static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr,
 	}
 
 	if (sk->sk_state == IUCV_DISCONN) {
-		release_sock(sk);
-		return -ECONNREFUSED;
+		err = -ECONNREFUSED;
 	}
 
 	if (err) {
@@ -545,7 +715,10 @@ static int iucv_sock_listen(struct socket *sock, int backlog)
 	lock_sock(sk);
 
 	err = -EINVAL;
-	if (sk->sk_state != IUCV_BOUND || sock->type != SOCK_STREAM)
+	if (sk->sk_state != IUCV_BOUND)
+		goto done;
+
+	if (sock->type != SOCK_STREAM && sock->type != SOCK_SEQPACKET)
 		goto done;
 
 	sk->sk_max_ack_backlog = backlog;
@@ -636,6 +809,30 @@ static int iucv_sock_getname(struct socket *sock, struct sockaddr *addr,
 	return 0;
 }
 
+/**
+ * iucv_send_iprm() - Send socket data in parameter list of an iucv message.
+ * @path:	IUCV path
+ * @msg:	Pointer to a struct iucv_message
+ * @skb:	The socket data to send, skb->len MUST BE <= 7
+ *
+ * Send the socket data in the parameter list in the iucv message
+ * (IUCV_IPRMDATA). The socket data is stored at index 0 to 6 in the parameter
+ * list and the socket data len at index 7 (last byte).
+ * See also iucv_msg_length().
+ *
+ * Returns the error code from the iucv_message_send() call.
+ */
+static int iucv_send_iprm(struct iucv_path *path, struct iucv_message *msg,
+			  struct sk_buff *skb)
+{
+	u8 prmdata[8];
+
+	memcpy(prmdata, (void *) skb->data, skb->len);
+	prmdata[7] = 0xff - (u8) skb->len;
+	return iucv_message_send(path, msg, IUCV_IPRMDATA, 0,
+				 (void *) prmdata, 8);
+}
+
 static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 			     struct msghdr *msg, size_t len)
 {
@@ -643,6 +840,8 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	struct iucv_sock *iucv = iucv_sk(sk);
 	struct sk_buff *skb;
 	struct iucv_message txmsg;
+	struct cmsghdr *cmsg;
+	int cmsg_done;
 	char user_id[9];
 	char appl_id[9];
 	int err;
@@ -654,6 +853,10 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	if (msg->msg_flags & MSG_OOB)
 		return -EOPNOTSUPP;
 
+	/* SOCK_SEQPACKET: we do not support segmented records */
+	if (sk->sk_type == SOCK_SEQPACKET && !(msg->msg_flags & MSG_EOR))
+		return -EOPNOTSUPP;
+
 	lock_sock(sk);
 
 	if (sk->sk_shutdown & SEND_SHUTDOWN) {
@@ -662,6 +865,52 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	}
 
 	if (sk->sk_state == IUCV_CONNECTED) {
+		/* initialize defaults */
+		cmsg_done   = 0;	/* check for duplicate headers */
+		txmsg.class = 0;
+
+		/* iterate over control messages */
+		for (cmsg = CMSG_FIRSTHDR(msg); cmsg;
+		     cmsg = CMSG_NXTHDR(msg, cmsg)) {
+
+			if (!CMSG_OK(msg, cmsg)) {
+				err = -EINVAL;
+				goto out;
+			}
+
+			if (cmsg->cmsg_level != SOL_IUCV)
+				continue;
+
+			if (cmsg->cmsg_type & cmsg_done) {
+				err = -EINVAL;
+				goto out;
+			}
+			cmsg_done |= cmsg->cmsg_type;
+
+			switch (cmsg->cmsg_type) {
+			case SCM_IUCV_TRGCLS:
+				if (cmsg->cmsg_len != CMSG_LEN(TRGCLS_SIZE)) {
+					err = -EINVAL;
+					goto out;
+				}
+
+				/* set iucv message target class */
+				memcpy(&txmsg.class,
+					(void *) CMSG_DATA(cmsg), TRGCLS_SIZE);
+
+				break;
+
+			default:
+				err = -EINVAL;
+				goto out;
+				break;
+			}
+		}
+
+		/* allocate one skb for each iucv message:
+		 * this is fine for SOCK_SEQPACKET (unless we want to support
+		 * segmented records using the MSG_EOR flag), but
+		 * for SOCK_STREAM we might want to improve it in future */
 		if (!(skb = sock_alloc_send_skb(sk, len,
 						msg->msg_flags & MSG_DONTWAIT,
 						&err)))
@@ -672,13 +921,33 @@ static int iucv_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 			goto fail;
 		}
 
-		txmsg.class = 0;
-		memcpy(&txmsg.class, skb->data, skb->len >= 4 ? 4 : skb->len);
+		/* increment and save iucv message tag for msg_completion cbk */
 		txmsg.tag = iucv->send_tag++;
-		memcpy(skb->cb, &txmsg.tag, 4);
+		memcpy(CB_TAG(skb), &txmsg.tag, CB_TAG_LEN);
 		skb_queue_tail(&iucv->send_skb_q, skb);
-		err = iucv_message_send(iucv->path, &txmsg, 0, 0,
-					(void *) skb->data, skb->len);
+
+		if (((iucv->path->flags & IUCV_IPRMDATA) & iucv->flags)
+		    && skb->len <= 7) {
+			err = iucv_send_iprm(iucv->path, &txmsg, skb);
+
+			/* on success: there is no message_complete callback
+			 * for an IPRMDATA msg; remove skb from send queue */
+			if (err == 0) {
+				skb_unlink(skb, &iucv->send_skb_q);
+				kfree_skb(skb);
+			}
+
+			/* this error should never happen since the
+			 * IUCV_IPRMDATA path flag is set... sever path */
+			if (err == 0x15) {
+				iucv_path_sever(iucv->path, NULL);
+				skb_unlink(skb, &iucv->send_skb_q);
+				err = -EPIPE;
+				goto fail;
+			}
+		} else
+			err = iucv_message_send(iucv->path, &txmsg, 0, 0,
+						(void *) skb->data, skb->len);
 		if (err) {
 			if (err == 3) {
 				user_id[8] = 0;
@@ -725,6 +994,10 @@ static int iucv_fragment_skb(struct sock *sk, struct sk_buff *skb, int len)
 		if (!nskb)
 			return -ENOMEM;
 
+		/* copy target class to control buffer of new skb */
+		memcpy(CB_TRGCLS(nskb), CB_TRGCLS(skb), CB_TRGCLS_LEN);
+
+		/* copy data fragment */
 		memcpy(nskb->data, skb->data + copied, size);
 		copied += size;
 		dataleft -= size;
@@ -744,19 +1017,33 @@ static void iucv_process_message(struct sock *sk, struct sk_buff *skb,
 				 struct iucv_message *msg)
 {
 	int rc;
+	unsigned int len;
+
+	len = iucv_msg_length(msg);
+
+	/* store msg target class in the second 4 bytes of skb ctrl buffer */
+	/* Note: the first 4 bytes are reserved for msg tag */
+	memcpy(CB_TRGCLS(skb), &msg->class, CB_TRGCLS_LEN);
 
-	if (msg->flags & IPRMDATA) {
-		skb->data = NULL;
-		skb->len = 0;
+	/* check for special IPRM messages (e.g. iucv_sock_shutdown) */
+	if ((msg->flags & IUCV_IPRMDATA) && len > 7) {
+		if (memcmp(msg->rmmsg, iprm_shutdown, 8) == 0) {
+			skb->data = NULL;
+			skb->len = 0;
+		}
 	} else {
-		rc = iucv_message_receive(path, msg, 0, skb->data,
-					  msg->length, NULL);
+		rc = iucv_message_receive(path, msg, msg->flags & IUCV_IPRMDATA,
+					  skb->data, len, NULL);
 		if (rc) {
 			kfree_skb(skb);
 			return;
 		}
-		if (skb->truesize >= sk->sk_rcvbuf / 4) {
-			rc = iucv_fragment_skb(sk, skb, msg->length);
+		/* we need to fragment iucv messages for SOCK_STREAM only;
+		 * for SOCK_SEQPACKET, it is only relevant if we support
+		 * record segmentation using MSG_EOR (see also recvmsg()) */
+		if (sk->sk_type == SOCK_STREAM &&
+		    skb->truesize >= sk->sk_rcvbuf / 4) {
+			rc = iucv_fragment_skb(sk, skb, len);
 			kfree_skb(skb);
 			skb = NULL;
 			if (rc) {
@@ -767,7 +1054,7 @@ static void iucv_process_message(struct sock *sk, struct sk_buff *skb,
 		} else {
 			skb_reset_transport_header(skb);
 			skb_reset_network_header(skb);
-			skb->len = msg->length;
+			skb->len = len;
 		}
 	}
 
@@ -782,7 +1069,7 @@ static void iucv_process_message_q(struct sock *sk)
 	struct sock_msg_q *p, *n;
 
 	list_for_each_entry_safe(p, n, &iucv->message_q.list, list) {
-		skb = alloc_skb(p->msg.length, GFP_ATOMIC | GFP_DMA);
+		skb = alloc_skb(iucv_msg_length(&p->msg), GFP_ATOMIC | GFP_DMA);
 		if (!skb)
 			break;
 		iucv_process_message(sk, skb, p->path, &p->msg);
@@ -799,7 +1086,7 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 	int noblock = flags & MSG_DONTWAIT;
 	struct sock *sk = sock->sk;
 	struct iucv_sock *iucv = iucv_sk(sk);
-	int target, copied = 0;
+	unsigned int copied, rlen;
 	struct sk_buff *skb, *rskb, *cskb;
 	int err = 0;
 
@@ -812,8 +1099,6 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 	if (flags & (MSG_OOB))
 		return -EOPNOTSUPP;
 
-	target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
-
 	/* receive/dequeue next skb:
 	 * the function understands MSG_PEEK and, thus, does not dequeue skb */
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
@@ -823,25 +1108,45 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 		return err;
 	}
 
-	copied = min_t(unsigned int, skb->len, len);
+	rlen   = skb->len;		/* real length of skb */
+	copied = min_t(unsigned int, rlen, len);
 
 	cskb = skb;
 	if (memcpy_toiovec(msg->msg_iov, cskb->data, copied)) {
-		skb_queue_head(&sk->sk_receive_queue, skb);
-		if (copied == 0)
-			return -EFAULT;
-		goto done;
+		if (!(flags & MSG_PEEK))
+			skb_queue_head(&sk->sk_receive_queue, skb);
+		return -EFAULT;
+	}
+
+	/* SOCK_SEQPACKET: set MSG_TRUNC if recv buf size is too small */
+	if (sk->sk_type == SOCK_SEQPACKET) {
+		if (copied < rlen)
+			msg->msg_flags |= MSG_TRUNC;
+		/* each iucv message contains a complete record */
+		msg->msg_flags |= MSG_EOR;
 	}
 
-	len -= copied;
+	/* create control message to store iucv msg target class:
+	 * get the trgcls from the control buffer of the skb due to
+	 * fragmentation of original iucv message. */
+	err = put_cmsg(msg, SOL_IUCV, SCM_IUCV_TRGCLS,
+			CB_TRGCLS_LEN, CB_TRGCLS(skb));
+	if (err) {
+		if (!(flags & MSG_PEEK))
+			skb_queue_head(&sk->sk_receive_queue, skb);
+		return err;
+	}
 
 	/* Mark read part of skb as used */
 	if (!(flags & MSG_PEEK)) {
-		skb_pull(skb, copied);
 
-		if (skb->len) {
-			skb_queue_head(&sk->sk_receive_queue, skb);
-			goto done;
+		/* SOCK_STREAM: re-queue skb if it contains unreceived data */
+		if (sk->sk_type == SOCK_STREAM) {
+			skb_pull(skb, copied);
+			if (skb->len) {
+				skb_queue_head(&sk->sk_receive_queue, skb);
+				goto done;
+			}
 		}
 
 		kfree_skb(skb);
@@ -866,7 +1171,11 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 	}
 
 done:
-	return err ? : copied;
+	/* SOCK_SEQPACKET: return real length if MSG_TRUNC is set */
+	if (sk->sk_type == SOCK_SEQPACKET && (flags & MSG_TRUNC))
+		copied = rlen;
+
+	return copied;
 }
 
 static inline unsigned int iucv_accept_poll(struct sock *parent)
@@ -928,7 +1237,6 @@ static int iucv_sock_shutdown(struct socket *sock, int how)
 	struct iucv_sock *iucv = iucv_sk(sk);
 	struct iucv_message txmsg;
 	int err = 0;
-	u8 prmmsg[8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01};
 
 	how++;
 
@@ -953,7 +1261,7 @@ static int iucv_sock_shutdown(struct socket *sock, int how)
 		txmsg.class = 0;
 		txmsg.tag = 0;
 		err = iucv_message_send(iucv->path, &txmsg, IUCV_IPRMDATA, 0,
-					(void *) prmmsg, 8);
+					(void *) iprm_shutdown, 8);
 		if (err) {
 			switch (err) {
 			case 1:
@@ -1007,6 +1315,98 @@ static int iucv_sock_release(struct socket *sock)
 	return err;
 }
 
+/* getsockopt and setsockopt */
+static int iucv_sock_setsockopt(struct socket *sock, int level, int optname,
+				char __user *optval, int optlen)
+{
+	struct sock *sk = sock->sk;
+	struct iucv_sock *iucv = iucv_sk(sk);
+	int val;
+	int rc;
+
+	if (level != SOL_IUCV)
+		return -ENOPROTOOPT;
+
+	if (optlen < sizeof(int))
+		return -EINVAL;
+
+	if (get_user(val, (int __user *) optval))
+		return -EFAULT;
+
+	rc = 0;
+
+	lock_sock(sk);
+	switch (optname) {
+	case SO_IPRMDATA_MSG:
+		if (val)
+			iucv->flags |= IUCV_IPRMDATA;
+		else
+			iucv->flags &= ~IUCV_IPRMDATA;
+		break;
+	case SO_MSGLIMIT:
+		switch (sk->sk_state) {
+		case IUCV_OPEN:
+		case IUCV_BOUND:
+			if (val < 1 || val > (u16)(~0))
+				rc = -EINVAL;
+			else
+				iucv->msglimit = val;
+			break;
+		default:
+			rc = -EINVAL;
+			break;
+		}
+		break;
+	default:
+		rc = -ENOPROTOOPT;
+		break;
+	}
+	release_sock(sk);
+
+	return rc;
+}
+
+static int iucv_sock_getsockopt(struct socket *sock, int level, int optname,
+				char __user *optval, int __user *optlen)
+{
+	struct sock *sk = sock->sk;
+	struct iucv_sock *iucv = iucv_sk(sk);
+	int val, len;
+
+	if (level != SOL_IUCV)
+		return -ENOPROTOOPT;
+
+	if (get_user(len, optlen))
+		return -EFAULT;
+
+	if (len < 0)
+		return -EINVAL;
+
+	len = min_t(unsigned int, len, sizeof(int));
+
+	switch (optname) {
+	case SO_IPRMDATA_MSG:
+		val = (iucv->flags & IUCV_IPRMDATA) ? 1 : 0;
+		break;
+	case SO_MSGLIMIT:
+		lock_sock(sk);
+		val = (iucv->path != NULL) ? iucv->path->msglim	/* connected */
+					   : iucv->msglimit;	/* default */
+		release_sock(sk);
+		break;
+	default:
+		return -ENOPROTOOPT;
+	}
+
+	if (put_user(len, optlen))
+		return -EFAULT;
+	if (copy_to_user(optval, &val, len))
+		return -EFAULT;
+
+	return 0;
+}
+
+
 /* Callback wrappers - called from iucv base support */
 static int iucv_callback_connreq(struct iucv_path *path,
 				 u8 ipvmid[8], u8 ipuser[16])
@@ -1060,7 +1460,7 @@ static int iucv_callback_connreq(struct iucv_path *path,
 	}
 
 	/* Create the new socket */
-	nsk = iucv_sock_alloc(NULL, SOCK_STREAM, GFP_ATOMIC);
+	nsk = iucv_sock_alloc(NULL, sk->sk_type, GFP_ATOMIC);
 	if (!nsk) {
 		err = iucv_path_sever(path, user_data);
 		iucv_path_free(path);
@@ -1083,7 +1483,9 @@ static int iucv_callback_connreq(struct iucv_path *path,
 	memcpy(nuser_data + 8, niucv->src_name, 8);
 	ASCEBC(nuser_data + 8, 8);
 
-	path->msglim = IUCV_QUEUELEN_DEFAULT;
+	/* set message limit for path based on msglimit of accepting socket */
+	niucv->msglimit = iucv->msglimit;
+	path->msglim = iucv->msglimit;
 	err = iucv_path_accept(path, &af_iucv_handler, nuser_data, nsk);
 	if (err) {
 		err = iucv_path_sever(path, user_data);
@@ -1131,19 +1533,17 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg)
 		goto save_message;
 
 	len = atomic_read(&sk->sk_rmem_alloc);
-	len += msg->length + sizeof(struct sk_buff);
+	len += iucv_msg_length(msg) + sizeof(struct sk_buff);
 	if (len > sk->sk_rcvbuf)
 		goto save_message;
 
-	skb = alloc_skb(msg->length, GFP_ATOMIC | GFP_DMA);
+	skb = alloc_skb(iucv_msg_length(msg), GFP_ATOMIC | GFP_DMA);
 	if (!skb)
 		goto save_message;
 
 	iucv_process_message(sk, skb, path, msg);
 	goto out_unlock;
 
-	return;
-
 save_message:
 	save_msg = kzalloc(sizeof(struct sock_msg_q), GFP_ATOMIC | GFP_DMA);
 	if (!save_msg)
@@ -1170,7 +1570,7 @@ static void iucv_callback_txdone(struct iucv_path *path,
 		spin_lock_irqsave(&list->lock, flags);
 
 		while (list_skb != (struct sk_buff *)list) {
-			if (!memcmp(&msg->tag, list_skb->cb, 4)) {
+			if (!memcmp(&msg->tag, CB_TAG(list_skb), CB_TAG_LEN)) {
 				this = list_skb;
 				break;
 			}
@@ -1206,6 +1606,21 @@ static void iucv_callback_connrej(struct iucv_path *path, u8 ipuser[16])
 	sk->sk_state_change(sk);
 }
 
+/* called if the other communication side shuts down its RECV direction;
+ * in turn, the callback sets SEND_SHUTDOWN to disable sending of data.
+ */
+static void iucv_callback_shutdown(struct iucv_path *path, u8 ipuser[16])
+{
+	struct sock *sk = path->private;
+
+	bh_lock_sock(sk);
+	if (sk->sk_state != IUCV_CLOSED) {
+		sk->sk_shutdown |= SEND_SHUTDOWN;
+		sk->sk_state_change(sk);
+	}
+	bh_unlock_sock(sk);
+}
+
 static struct proto_ops iucv_sock_ops = {
 	.family		= PF_IUCV,
 	.owner		= THIS_MODULE,
@@ -1222,8 +1637,8 @@ static struct proto_ops iucv_sock_ops = {
 	.mmap		= sock_no_mmap,
 	.socketpair	= sock_no_socketpair,
 	.shutdown	= iucv_sock_shutdown,
-	.setsockopt	= sock_no_setsockopt,
-	.getsockopt	= sock_no_getsockopt
+	.setsockopt	= iucv_sock_setsockopt,
+	.getsockopt	= iucv_sock_getsockopt,
 };
 
 static struct net_proto_family iucv_sock_family_ops = {
@@ -1258,8 +1673,30 @@ static int __init afiucv_init(void)
 	err = sock_register(&iucv_sock_family_ops);
 	if (err)
 		goto out_proto;
+	/* establish dummy device */
+	err = driver_register(&af_iucv_driver);
+	if (err)
+		goto out_sock;
+	af_iucv_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!af_iucv_dev) {
+		err = -ENOMEM;
+		goto out_driver;
+	}
+	dev_set_name(af_iucv_dev, "af_iucv");
+	af_iucv_dev->bus = &iucv_bus;
+	af_iucv_dev->parent = iucv_root;
+	af_iucv_dev->release = (void (*)(struct device *))kfree;
+	af_iucv_dev->driver = &af_iucv_driver;
+	err = device_register(af_iucv_dev);
+	if (err)
+		goto out_driver;
+
 	return 0;
 
+out_driver:
+	driver_unregister(&af_iucv_driver);
+out_sock:
+	sock_unregister(PF_IUCV);
 out_proto:
 	proto_unregister(&iucv_proto);
 out_iucv:
@@ -1270,6 +1707,8 @@ out:
 
 static void __exit afiucv_exit(void)
 {
+	device_unregister(af_iucv_dev);
+	driver_unregister(&af_iucv_driver);
 	sock_unregister(PF_IUCV);
 	proto_unregister(&iucv_proto);
 	iucv_unregister(&af_iucv_handler, 0);
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index a35240f61ec..c833481d32e 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -1,7 +1,8 @@
 /*
  * IUCV base infrastructure.
  *
- * Copyright 2001, 2006 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 2001, 2009
+ *
  * Author(s):
  *    Original source:
  *	Alan Altmark (Alan_Altmark@us.ibm.com)	Sept. 2000
@@ -10,6 +11,8 @@
  *	Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com)
  *    Rewritten for af_iucv:
  *	Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *    PM functions:
+ *	Ursula Braun (ursula.braun@de.ibm.com)
  *
  * Documentation used:
  *    The original source
@@ -45,6 +48,7 @@
 #include <linux/err.h>
 #include <linux/device.h>
 #include <linux/cpu.h>
+#include <linux/reboot.h>
 #include <net/iucv/iucv.h>
 #include <asm/atomic.h>
 #include <asm/ebcdic.h>
@@ -75,9 +79,24 @@ static int iucv_bus_match(struct device *dev, struct device_driver *drv)
 	return 0;
 }
 
+static int iucv_pm_prepare(struct device *);
+static void iucv_pm_complete(struct device *);
+static int iucv_pm_freeze(struct device *);
+static int iucv_pm_thaw(struct device *);
+static int iucv_pm_restore(struct device *);
+
+static struct dev_pm_ops iucv_pm_ops = {
+	.prepare = iucv_pm_prepare,
+	.complete = iucv_pm_complete,
+	.freeze = iucv_pm_freeze,
+	.thaw = iucv_pm_thaw,
+	.restore = iucv_pm_restore,
+};
+
 struct bus_type iucv_bus = {
 	.name = "iucv",
 	.match = iucv_bus_match,
+	.pm = &iucv_pm_ops,
 };
 EXPORT_SYMBOL(iucv_bus);
 
@@ -147,6 +166,7 @@ enum iucv_command_codes {
 	IUCV_RESUME = 14,
 	IUCV_SEVER = 15,
 	IUCV_SETMASK = 16,
+	IUCV_SETCONTROLMASK = 17,
 };
 
 /*
@@ -280,6 +300,7 @@ union iucv_param {
  * Anchor for per-cpu IUCV command parameter block.
  */
 static union iucv_param *iucv_param[NR_CPUS];
+static union iucv_param *iucv_param_irq[NR_CPUS];
 
 /**
  * iucv_call_b2f0
@@ -358,11 +379,23 @@ static void iucv_allow_cpu(void *data)
 	 *	0x10 - Flag to allow priority message completion interrupts
 	 *	0x08 - Flag to allow IUCV control interrupts
 	 */
-	parm = iucv_param[cpu];
+	parm = iucv_param_irq[cpu];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->set_mask.ipmask = 0xf8;
 	iucv_call_b2f0(IUCV_SETMASK, parm);
 
+	/*
+	 * Enable all iucv control interrupts.
+	 * ipmask contains bits for the different interrupts
+	 *	0x80 - Flag to allow pending connections interrupts
+	 *	0x40 - Flag to allow connection complete interrupts
+	 *	0x20 - Flag to allow connection severed interrupts
+	 *	0x10 - Flag to allow connection quiesced interrupts
+	 *	0x08 - Flag to allow connection resumed interrupts
+	 */
+	memset(parm, 0, sizeof(union iucv_param));
+	parm->set_mask.ipmask = 0xf8;
+	iucv_call_b2f0(IUCV_SETCONTROLMASK, parm);
 	/* Set indication that iucv interrupts are allowed for this cpu. */
 	cpu_set(cpu, iucv_irq_cpumask);
 }
@@ -379,7 +412,7 @@ static void iucv_block_cpu(void *data)
 	union iucv_param *parm;
 
 	/* Disable all iucv interrupts. */
-	parm = iucv_param[cpu];
+	parm = iucv_param_irq[cpu];
 	memset(parm, 0, sizeof(union iucv_param));
 	iucv_call_b2f0(IUCV_SETMASK, parm);
 
@@ -388,6 +421,31 @@ static void iucv_block_cpu(void *data)
 }
 
 /**
+ * iucv_block_cpu_almost
+ * @data: unused
+ *
+ * Allow connection-severed interrupts only on this cpu.
+ */
+static void iucv_block_cpu_almost(void *data)
+{
+	int cpu = smp_processor_id();
+	union iucv_param *parm;
+
+	/* Allow iucv control interrupts only */
+	parm = iucv_param_irq[cpu];
+	memset(parm, 0, sizeof(union iucv_param));
+	parm->set_mask.ipmask = 0x08;
+	iucv_call_b2f0(IUCV_SETMASK, parm);
+	/* Allow iucv-severed interrupt only */
+	memset(parm, 0, sizeof(union iucv_param));
+	parm->set_mask.ipmask = 0x20;
+	iucv_call_b2f0(IUCV_SETCONTROLMASK, parm);
+
+	/* Clear indication that iucv interrupts are allowed for this cpu. */
+	cpu_clear(cpu, iucv_irq_cpumask);
+}
+
+/**
  * iucv_declare_cpu
  * @data: unused
  *
@@ -403,7 +461,7 @@ static void iucv_declare_cpu(void *data)
 		return;
 
 	/* Declare interrupt buffer. */
-	parm = iucv_param[cpu];
+	parm = iucv_param_irq[cpu];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->db.ipbfadr1 = virt_to_phys(iucv_irq_data[cpu]);
 	rc = iucv_call_b2f0(IUCV_DECLARE_BUFFER, parm);
@@ -460,7 +518,7 @@ static void iucv_retrieve_cpu(void *data)
 	iucv_block_cpu(NULL);
 
 	/* Retrieve interrupt buffer. */
-	parm = iucv_param[cpu];
+	parm = iucv_param_irq[cpu];
 	iucv_call_b2f0(IUCV_RETRIEVE_BUFFER, parm);
 
 	/* Clear indication that an iucv buffer exists for this cpu. */
@@ -574,11 +632,22 @@ static int __cpuinit iucv_cpu_notify(struct notifier_block *self,
 			iucv_irq_data[cpu] = NULL;
 			return NOTIFY_BAD;
 		}
+		iucv_param_irq[cpu] = kmalloc_node(sizeof(union iucv_param),
+					GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
+		if (!iucv_param_irq[cpu]) {
+			kfree(iucv_param[cpu]);
+			iucv_param[cpu] = NULL;
+			kfree(iucv_irq_data[cpu]);
+			iucv_irq_data[cpu] = NULL;
+			return NOTIFY_BAD;
+		}
 		break;
 	case CPU_UP_CANCELED:
 	case CPU_UP_CANCELED_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
+		kfree(iucv_param_irq[cpu]);
+		iucv_param_irq[cpu] = NULL;
 		kfree(iucv_param[cpu]);
 		iucv_param[cpu] = NULL;
 		kfree(iucv_irq_data[cpu]);
@@ -625,7 +694,7 @@ static int iucv_sever_pathid(u16 pathid, u8 userdata[16])
 {
 	union iucv_param *parm;
 
-	parm = iucv_param[smp_processor_id()];
+	parm = iucv_param_irq[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (userdata)
 		memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
@@ -746,6 +815,28 @@ void iucv_unregister(struct iucv_handler *handler, int smp)
 }
 EXPORT_SYMBOL(iucv_unregister);
 
+static int iucv_reboot_event(struct notifier_block *this,
+			     unsigned long event, void *ptr)
+{
+	int i, rc;
+
+	get_online_cpus();
+	on_each_cpu(iucv_block_cpu, NULL, 1);
+	preempt_disable();
+	for (i = 0; i < iucv_max_pathid; i++) {
+		if (iucv_path_table[i])
+			rc = iucv_sever_pathid(i, NULL);
+	}
+	preempt_enable();
+	put_online_cpus();
+	iucv_disable();
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block iucv_reboot_notifier = {
+	.notifier_call = iucv_reboot_event,
+};
+
 /**
  * iucv_path_accept
  * @path: address of iucv path structure
@@ -765,6 +856,10 @@ int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler,
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	/* Prepare parameter block. */
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
@@ -780,6 +875,7 @@ int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler,
 		path->msglim = parm->ctrl.ipmsglim;
 		path->flags = parm->ctrl.ipflags1;
 	}
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -809,6 +905,10 @@ int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler,
 
 	spin_lock_bh(&iucv_table_lock);
 	iucv_cleanup_queue();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->ctrl.ipmsglim = path->msglim;
@@ -843,6 +943,7 @@ int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler,
 			rc = -EIO;
 		}
 	}
+out:
 	spin_unlock_bh(&iucv_table_lock);
 	return rc;
 }
@@ -864,12 +965,17 @@ int iucv_path_quiesce(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (userdata)
 		memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
 	parm->ctrl.ippathid = path->pathid;
 	rc = iucv_call_b2f0(IUCV_QUIESCE, parm);
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -891,12 +997,17 @@ int iucv_path_resume(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (userdata)
 		memcpy(parm->ctrl.ipuser, userdata, sizeof(parm->ctrl.ipuser));
 	parm->ctrl.ippathid = path->pathid;
 	rc = iucv_call_b2f0(IUCV_RESUME, parm);
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -915,15 +1026,18 @@ int iucv_path_sever(struct iucv_path *path, u8 userdata[16])
 	int rc;
 
 	preempt_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	if (iucv_active_cpu != smp_processor_id())
 		spin_lock_bh(&iucv_table_lock);
 	rc = iucv_sever_pathid(path->pathid, userdata);
-	if (!rc) {
-		iucv_path_table[path->pathid] = NULL;
-		list_del_init(&path->list);
-	}
+	iucv_path_table[path->pathid] = NULL;
+	list_del_init(&path->list);
 	if (iucv_active_cpu != smp_processor_id())
 		spin_unlock_bh(&iucv_table_lock);
+out:
 	preempt_enable();
 	return rc;
 }
@@ -946,6 +1060,10 @@ int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->purge.ippathid = path->pathid;
@@ -957,6 +1075,7 @@ int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg,
 		msg->audit = (*(u32 *) &parm->purge.ipaudit) >> 8;
 		msg->tag = parm->purge.ipmsgtag;
 	}
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -1033,6 +1152,10 @@ int __iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
 	if (msg->flags & IUCV_IPRMDATA)
 		return iucv_message_receive_iprmdata(path, msg, flags,
 						     buffer, size, residual);
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->db.ipbfadr1 = (u32)(addr_t) buffer;
@@ -1048,6 +1171,7 @@ int __iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
 		if (residual)
 			*residual = parm->db.ipbfln1f;
 	}
+out:
 	return rc;
 }
 EXPORT_SYMBOL(__iucv_message_receive);
@@ -1101,6 +1225,10 @@ int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg)
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	parm->db.ippathid = path->pathid;
@@ -1108,6 +1236,7 @@ int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg)
 	parm->db.iptrgcls = msg->class;
 	parm->db.ipflags1 = (IUCV_IPTRGCLS | IUCV_IPFGMID | IUCV_IPFGPID);
 	rc = iucv_call_b2f0(IUCV_REJECT, parm);
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -1135,6 +1264,10 @@ int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (flags & IUCV_IPRMDATA) {
@@ -1152,6 +1285,7 @@ int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg,
 		parm->db.iptrgcls = msg->class;
 	}
 	rc = iucv_call_b2f0(IUCV_REPLY, parm);
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -1180,6 +1314,10 @@ int __iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
 	union iucv_param *parm;
 	int rc;
 
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (flags & IUCV_IPRMDATA) {
@@ -1202,6 +1340,7 @@ int __iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
 	rc = iucv_call_b2f0(IUCV_SEND, parm);
 	if (!rc)
 		msg->id = parm->db.ipmsgid;
+out:
 	return rc;
 }
 EXPORT_SYMBOL(__iucv_message_send);
@@ -1262,6 +1401,10 @@ int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg,
 	int rc;
 
 	local_bh_disable();
+	if (!cpu_isset(smp_processor_id(), iucv_buffer_cpumask)) {
+		rc = -EIO;
+		goto out;
+	}
 	parm = iucv_param[smp_processor_id()];
 	memset(parm, 0, sizeof(union iucv_param));
 	if (flags & IUCV_IPRMDATA) {
@@ -1287,6 +1430,7 @@ int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg,
 	rc = iucv_call_b2f0(IUCV_SEND, parm);
 	if (!rc)
 		msg->id = parm->db.ipmsgid;
+out:
 	local_bh_enable();
 	return rc;
 }
@@ -1378,6 +1522,8 @@ static void iucv_path_complete(struct iucv_irq_data *data)
 	struct iucv_path_complete *ipc = (void *) data;
 	struct iucv_path *path = iucv_path_table[ipc->ippathid];
 
+	if (path)
+		path->flags = ipc->ipflags1;
 	if (path && path->handler && path->handler->path_complete)
 		path->handler->path_complete(path, ipc->ipuser);
 }
@@ -1413,7 +1559,7 @@ static void iucv_path_severed(struct iucv_irq_data *data)
 	else {
 		iucv_sever_pathid(path->pathid, NULL);
 		iucv_path_table[path->pathid] = NULL;
-		list_del_init(&path->list);
+		list_del(&path->list);
 		iucv_path_free(path);
 	}
 }
@@ -1675,6 +1821,130 @@ static void iucv_external_interrupt(u16 code)
 	spin_unlock(&iucv_queue_lock);
 }
 
+static int iucv_pm_prepare(struct device *dev)
+{
+	int rc = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_INFO "iucv_pm_prepare\n");
+#endif
+	if (dev->driver && dev->driver->pm && dev->driver->pm->prepare)
+		rc = dev->driver->pm->prepare(dev);
+	return rc;
+}
+
+static void iucv_pm_complete(struct device *dev)
+{
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_INFO "iucv_pm_complete\n");
+#endif
+	if (dev->driver && dev->driver->pm && dev->driver->pm->complete)
+		dev->driver->pm->complete(dev);
+}
+
+/**
+ * iucv_path_table_empty() - determine if iucv path table is empty
+ *
+ * Returns 0 if there are still iucv pathes defined
+ *	   1 if there are no iucv pathes defined
+ */
+int iucv_path_table_empty(void)
+{
+	int i;
+
+	for (i = 0; i < iucv_max_pathid; i++) {
+		if (iucv_path_table[i])
+			return 0;
+	}
+	return 1;
+}
+
+/**
+ * iucv_pm_freeze() - Freeze PM callback
+ * @dev:	iucv-based device
+ *
+ * disable iucv interrupts
+ * invoke callback function of the iucv-based driver
+ * shut down iucv, if no iucv-pathes are established anymore
+ */
+static int iucv_pm_freeze(struct device *dev)
+{
+	int cpu;
+	int rc = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "iucv_pm_freeze\n");
+#endif
+	for_each_cpu_mask_nr(cpu, iucv_irq_cpumask)
+		smp_call_function_single(cpu, iucv_block_cpu_almost, NULL, 1);
+	if (dev->driver && dev->driver->pm && dev->driver->pm->freeze)
+		rc = dev->driver->pm->freeze(dev);
+	if (iucv_path_table_empty())
+		iucv_disable();
+	return rc;
+}
+
+/**
+ * iucv_pm_thaw() - Thaw PM callback
+ * @dev:	iucv-based device
+ *
+ * make iucv ready for use again: allocate path table, declare interrupt buffers
+ *				  and enable iucv interrupts
+ * invoke callback function of the iucv-based driver
+ */
+static int iucv_pm_thaw(struct device *dev)
+{
+	int rc = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "iucv_pm_thaw\n");
+#endif
+	if (!iucv_path_table) {
+		rc = iucv_enable();
+		if (rc)
+			goto out;
+	}
+	if (cpus_empty(iucv_irq_cpumask)) {
+		if (iucv_nonsmp_handler)
+			/* enable interrupts on one cpu */
+			iucv_allow_cpu(NULL);
+		else
+			/* enable interrupts on all cpus */
+			iucv_setmask_mp();
+	}
+	if (dev->driver && dev->driver->pm && dev->driver->pm->thaw)
+		rc = dev->driver->pm->thaw(dev);
+out:
+	return rc;
+}
+
+/**
+ * iucv_pm_restore() - Restore PM callback
+ * @dev:	iucv-based device
+ *
+ * make iucv ready for use again: allocate path table, declare interrupt buffers
+ *				  and enable iucv interrupts
+ * invoke callback function of the iucv-based driver
+ */
+static int iucv_pm_restore(struct device *dev)
+{
+	int rc = 0;
+
+#ifdef CONFIG_PM_DEBUG
+	printk(KERN_WARNING "iucv_pm_restore %p\n", iucv_path_table);
+#endif
+	if (cpus_empty(iucv_irq_cpumask)) {
+		rc = iucv_query_maxconn();
+		rc = iucv_enable();
+		if (rc)
+			goto out;
+	}
+	if (dev->driver && dev->driver->pm && dev->driver->pm->restore)
+		rc = dev->driver->pm->restore(dev);
+out:
+	return rc;
+}
+
 /**
  * iucv_init
  *
@@ -1717,23 +1987,37 @@ static int __init iucv_init(void)
 			rc = -ENOMEM;
 			goto out_free;
 		}
+		iucv_param_irq[cpu] = kmalloc_node(sizeof(union iucv_param),
+				  GFP_KERNEL|GFP_DMA, cpu_to_node(cpu));
+		if (!iucv_param_irq[cpu]) {
+			rc = -ENOMEM;
+			goto out_free;
+		}
+
 	}
 	rc = register_hotcpu_notifier(&iucv_cpu_notifier);
 	if (rc)
 		goto out_free;
+	rc = register_reboot_notifier(&iucv_reboot_notifier);
+	if (rc)
+		goto out_cpu;
 	ASCEBC(iucv_error_no_listener, 16);
 	ASCEBC(iucv_error_no_memory, 16);
 	ASCEBC(iucv_error_pathid, 16);
 	iucv_available = 1;
 	rc = bus_register(&iucv_bus);
 	if (rc)
-		goto out_cpu;
+		goto out_reboot;
 	return 0;
 
+out_reboot:
+	unregister_reboot_notifier(&iucv_reboot_notifier);
 out_cpu:
 	unregister_hotcpu_notifier(&iucv_cpu_notifier);
 out_free:
 	for_each_possible_cpu(cpu) {
+		kfree(iucv_param_irq[cpu]);
+		iucv_param_irq[cpu] = NULL;
 		kfree(iucv_param[cpu]);
 		iucv_param[cpu] = NULL;
 		kfree(iucv_irq_data[cpu]);
@@ -1762,8 +2046,11 @@ static void __exit iucv_exit(void)
 	list_for_each_entry_safe(p, n, &iucv_work_queue, list)
 		kfree(p);
 	spin_unlock_irq(&iucv_queue_lock);
+	unregister_reboot_notifier(&iucv_reboot_notifier);
 	unregister_hotcpu_notifier(&iucv_cpu_notifier);
 	for_each_possible_cpu(cpu) {
+		kfree(iucv_param_irq[cpu]);
+		iucv_param_irq[cpu] = NULL;
 		kfree(iucv_param[cpu]);
 		iucv_param[cpu] = NULL;
 		kfree(iucv_irq_data[cpu]);
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index febae702685..9208cf5f2bd 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -935,7 +935,7 @@ static int llc_ui_getname(struct socket *sock, struct sockaddr *uaddr,
 
 		if (llc->dev) {
 			sllc.sllc_arphrd = llc->dev->type;
-			memcpy(&sllc.sllc_mac, &llc->dev->dev_addr,
+			memcpy(&sllc.sllc_mac, llc->dev->dev_addr,
 			       IFHWADDRLEN);
 		}
 	}
diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c
index 3477624a490..c6bab39b018 100644
--- a/net/llc/llc_conn.c
+++ b/net/llc/llc_conn.c
@@ -79,10 +79,6 @@ int llc_conn_state_process(struct sock *sk, struct sk_buff *skb)
 
 	if (unlikely(!ev->ind_prim && !ev->cfm_prim)) {
 		/* indicate or confirm not required */
-		/* XXX this is not very pretty, perhaps we should store
-		 * XXX indicate/confirm-needed state in the llc_conn_state_ev
-		 * XXX control block of the SKB instead? -DaveM
-		 */
 		if (!skb->next)
 			goto out_kfree_skb;
 		goto out_skb_put;
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index ecc3faf9f11..ba2643a43c7 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -1,16 +1,35 @@
 config MAC80211
 	tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
+	depends on CFG80211
 	select CRYPTO
 	select CRYPTO_ECB
 	select CRYPTO_ARC4
 	select CRYPTO_AES
 	select CRC32
 	select WIRELESS_EXT
-	select CFG80211
 	---help---
 	  This option enables the hardware independent IEEE 802.11
 	  networking stack.
 
+comment "CFG80211 needs to be enabled for MAC80211"
+	depends on CFG80211=n
+
+config MAC80211_DEFAULT_PS
+	bool "enable powersave by default"
+	depends on MAC80211
+	default y
+	help
+	  This option enables powersave mode by default.
+
+	  If this causes your applications to misbehave you should fix your
+	  applications instead -- they need to register their network
+	  latency requirement, see Documentation/power/pm_qos_interface.txt.
+
+config MAC80211_DEFAULT_PS_VALUE
+	int
+	default 1 if MAC80211_DEFAULT_PS
+	default 0
+
 menu "Rate control algorithm selection"
 	depends on MAC80211 != n
 
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 07656d830bc..bc064d7933f 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -16,12 +16,12 @@
 #include <linux/ieee80211.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 
 void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 				    u16 initiator, u16 reason)
 {
 	struct ieee80211_local *local = sta->local;
-	struct ieee80211_hw *hw = &local->hw;
 	int i;
 
 	/* check if TID is in operational state */
@@ -41,8 +41,8 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 	       sta->sta.addr, tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
 
-	if (local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_STOP,
-				     &sta->sta, tid, NULL))
+	if (drv_ampdu_action(local, IEEE80211_AMPDU_RX_STOP,
+			     &sta->sta, tid, NULL))
 		printk(KERN_DEBUG "HW problem - can not stop rx "
 				"aggregation for tid %d\n", tid);
 
@@ -68,6 +68,7 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
 	spin_lock_bh(&sta->lock);
 	/* free resources */
 	kfree(sta->ampdu_mlme.tid_rx[tid]->reorder_buf);
+	kfree(sta->ampdu_mlme.tid_rx[tid]->reorder_time);
 
 	if (!sta->ampdu_mlme.tid_rx[tid]->shutdown) {
 		kfree(sta->ampdu_mlme.tid_rx[tid]);
@@ -268,19 +269,23 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	/* prepare reordering buffer */
 	tid_agg_rx->reorder_buf =
 		kcalloc(buf_size, sizeof(struct sk_buff *), GFP_ATOMIC);
-	if (!tid_agg_rx->reorder_buf) {
+	tid_agg_rx->reorder_time =
+		kcalloc(buf_size, sizeof(unsigned long), GFP_ATOMIC);
+	if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		if (net_ratelimit())
 			printk(KERN_ERR "can not allocate reordering buffer "
 			       "to tid %d\n", tid);
 #endif
+		kfree(tid_agg_rx->reorder_buf);
+		kfree(tid_agg_rx->reorder_time);
 		kfree(sta->ampdu_mlme.tid_rx[tid]);
+		sta->ampdu_mlme.tid_rx[tid] = NULL;
 		goto end;
 	}
 
-	if (local->ops->ampdu_action)
-		ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
-					       &sta->sta, tid, &start_seq_num);
+	ret = drv_ampdu_action(local, IEEE80211_AMPDU_RX_START,
+			       &sta->sta, tid, &start_seq_num);
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 947aaaad35d..9e5762ad307 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -16,6 +16,7 @@
 #include <linux/ieee80211.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "wme.h"
 
 /**
@@ -131,11 +132,14 @@ static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 
 	state = &sta->ampdu_mlme.tid_state_tx[tid];
 
+	if (*state == HT_AGG_STATE_OPERATIONAL)
+		sta->ampdu_mlme.addba_req_num[tid] = 0;
+
 	*state = HT_AGG_STATE_REQ_STOP_BA_MSK |
 		(initiator << HT_AGG_STATE_INITIATOR_SHIFT);
 
-	ret = local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_STOP,
-				       &sta->sta, tid, NULL);
+	ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_STOP,
+			       &sta->sta, tid, NULL);
 
 	/* HW shall not deny going back to legacy */
 	if (WARN_ON(ret)) {
@@ -306,8 +310,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
 
 	start_seq_num = sta->tid_seq[tid];
 
-	ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
-				       &sta->sta, tid, &start_seq_num);
+	ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_START,
+			       &sta->sta, tid, &start_seq_num);
 
 	if (ret) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
@@ -336,6 +340,7 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
 			 sta->ampdu_mlme.tid_tx[tid]->dialog_token,
 			 sta->ampdu_mlme.tid_tx[tid]->ssn,
 			 0x40, 5000);
+	sta->ampdu_mlme.addba_req_num[tid]++;
 	/* activate the timer for the recipient's addBA response */
 	sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires =
 				jiffies + ADDBA_RESP_INTERVAL;
@@ -418,8 +423,8 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
 	ieee80211_agg_splice_finish(local, sta, tid);
 	spin_unlock(&local->ampdu_lock);
 
-	local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_OPERATIONAL,
-				 &sta->sta, tid, NULL);
+	drv_ampdu_action(local, IEEE80211_AMPDU_TX_OPERATIONAL,
+			 &sta->sta, tid, NULL);
 }
 
 void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid)
@@ -605,7 +610,6 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid)
 
 	*state = HT_AGG_STATE_IDLE;
 	/* from now on packets are no longer put onto sta->pending */
-	sta->ampdu_mlme.addba_req_num[tid] = 0;
 	kfree(sta->ampdu_mlme.tid_tx[tid]);
 	sta->ampdu_mlme.tid_tx[tid] = NULL;
 
@@ -688,7 +692,6 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
 
 		sta->ampdu_mlme.addba_req_num[tid] = 0;
 	} else {
-		sta->ampdu_mlme.addba_req_num[tid]++;
 		___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR);
 	}
 	spin_unlock_bh(&sta->lock);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index e677b751d46..3f47276caeb 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -13,6 +13,7 @@
 #include <linux/rcupdate.h>
 #include <net/cfg80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "cfg.h"
 #include "rate.h"
 #include "mesh.h"
@@ -111,7 +112,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
 }
 
 static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
-			     u8 key_idx, u8 *mac_addr,
+			     u8 key_idx, const u8 *mac_addr,
 			     struct key_params *params)
 {
 	struct ieee80211_sub_if_data *sdata;
@@ -140,7 +141,8 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 		return -EINVAL;
 	}
 
-	key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key);
+	key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key,
+				  params->seq_len, params->seq);
 	if (!key)
 		return -ENOMEM;
 
@@ -165,7 +167,7 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
-			     u8 key_idx, u8 *mac_addr)
+			     u8 key_idx, const u8 *mac_addr)
 {
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
@@ -207,7 +209,7 @@ static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
-			     u8 key_idx, u8 *mac_addr, void *cookie,
+			     u8 key_idx, const u8 *mac_addr, void *cookie,
 			     void (*callback)(void *cookie,
 					      struct key_params *params))
 {
@@ -245,12 +247,10 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 		iv32 = key->u.tkip.tx.iv32;
 		iv16 = key->u.tkip.tx.iv16;
 
-		if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
-		    sdata->local->ops->get_tkip_seq)
-			sdata->local->ops->get_tkip_seq(
-				local_to_hw(sdata->local),
-				key->conf.hw_key_idx,
-				&iv32, &iv16);
+		if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
+			drv_get_tkip_seq(sdata->local,
+					 key->conf.hw_key_idx,
+					 &iv32, &iv16);
 
 		seq[0] = iv16 & 0xff;
 		seq[1] = (iv16 >> 8) & 0xff;
@@ -451,18 +451,11 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 	 * This is a kludge. beacon interval should really be part
 	 * of the beacon information.
 	 */
-	if (params->interval && (sdata->local->hw.conf.beacon_int !=
-				 params->interval)) {
-		sdata->local->hw.conf.beacon_int = params->interval;
-		err = ieee80211_hw_config(sdata->local,
-					IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
-		if (err < 0)
-			return err;
-		/*
-		 * We updated some parameter so if below bails out
-		 * it's not an error.
-		 */
-		err = 0;
+	if (params->interval &&
+	    (sdata->vif.bss_conf.beacon_int != params->interval)) {
+		sdata->vif.bss_conf.beacon_int = params->interval;
+		ieee80211_bss_info_change_notify(sdata,
+						 BSS_CHANGED_BEACON_INT);
 	}
 
 	/* Need to have a beacon head if we don't have one yet */
@@ -528,8 +521,9 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 
 	kfree(old);
 
-	return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
-					  IEEE80211_IFCC_BEACON_ENABLED);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
+						BSS_CHANGED_BEACON);
+	return 0;
 }
 
 static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
@@ -580,7 +574,8 @@ static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
 	synchronize_rcu();
 	kfree(old);
 
-	return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON_ENABLED);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
+	return 0;
 }
 
 /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
@@ -635,34 +630,45 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 	int i, j;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	u32 mask, set;
 
 	sband = local->hw.wiphy->bands[local->oper_channel->band];
 
-	/*
-	 * FIXME: updating the flags is racy when this function is
-	 *	  called from ieee80211_change_station(), this will
-	 *	  be resolved in a future patch.
-	 */
+	spin_lock_bh(&sta->lock);
+	mask = params->sta_flags_mask;
+	set = params->sta_flags_set;
 
-	if (params->station_flags & STATION_FLAG_CHANGED) {
-		spin_lock_bh(&sta->lock);
+	if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
 		sta->flags &= ~WLAN_STA_AUTHORIZED;
-		if (params->station_flags & STATION_FLAG_AUTHORIZED)
+		if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
 			sta->flags |= WLAN_STA_AUTHORIZED;
+	}
 
+	if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
 		sta->flags &= ~WLAN_STA_SHORT_PREAMBLE;
-		if (params->station_flags & STATION_FLAG_SHORT_PREAMBLE)
+		if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
 			sta->flags |= WLAN_STA_SHORT_PREAMBLE;
+	}
 
+	if (mask & BIT(NL80211_STA_FLAG_WME)) {
 		sta->flags &= ~WLAN_STA_WME;
-		if (params->station_flags & STATION_FLAG_WME)
+		if (set & BIT(NL80211_STA_FLAG_WME))
 			sta->flags |= WLAN_STA_WME;
+	}
 
+	if (mask & BIT(NL80211_STA_FLAG_MFP)) {
 		sta->flags &= ~WLAN_STA_MFP;
-		if (params->station_flags & STATION_FLAG_MFP)
+		if (set & BIT(NL80211_STA_FLAG_MFP))
 			sta->flags |= WLAN_STA_MFP;
-		spin_unlock_bh(&sta->lock);
 	}
+	spin_unlock_bh(&sta->lock);
+
+	/*
+	 * cfg80211 validates this (1-2007) and allows setting the AID
+	 * only when creating a new station entry
+	 */
+	if (params->aid)
+		sta->sta.aid = params->aid;
 
 	/*
 	 * FIXME: updating the following information is racy when this
@@ -671,12 +677,6 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 	 *	  maybe we should just reject attemps to change it.
 	 */
 
-	if (params->aid) {
-		sta->sta.aid = params->aid;
-		if (sta->sta.aid > IEEE80211_MAX_AID)
-			sta->sta.aid = 0; /* XXX: should this be an error? */
-	}
-
 	if (params->listen_interval >= 0)
 		sta->listen_interval = params->listen_interval;
 
@@ -1120,10 +1120,10 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
 	p.cw_max = params->cwmax;
 	p.cw_min = params->cwmin;
 	p.txop = params->txop;
-	if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) {
+	if (drv_conf_tx(local, params->queue, &p)) {
 		printk(KERN_DEBUG "%s: failed to set TX queue "
-		       "parameters for queue %d\n", local->mdev->name,
-		       params->queue);
+		       "parameters for queue %d\n",
+		       wiphy_name(local->hw.wiphy), params->queue);
 		return -EINVAL;
 	}
 
@@ -1167,7 +1167,8 @@ static int ieee80211_scan(struct wiphy *wiphy,
 
 	if (sdata->vif.type != NL80211_IFTYPE_STATION &&
 	    sdata->vif.type != NL80211_IFTYPE_ADHOC &&
-	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
+	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+	    (sdata->vif.type != NL80211_IFTYPE_AP || sdata->u.ap.beacon))
 		return -EOPNOTSUPP;
 
 	return ieee80211_request_scan(sdata, req);
@@ -1255,9 +1256,22 @@ static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
 		sdata->u.mgd.flags |= IEEE80211_STA_AUTO_SSID_SEL;
 
 	ret = ieee80211_sta_set_extra_ie(sdata, req->ie, req->ie_len);
-	if (ret)
+	if (ret && ret != -EALREADY)
 		return ret;
 
+	if (req->use_mfp) {
+		sdata->u.mgd.mfp = IEEE80211_MFP_REQUIRED;
+		sdata->u.mgd.flags |= IEEE80211_STA_MFP_ENABLED;
+	} else {
+		sdata->u.mgd.mfp = IEEE80211_MFP_DISABLED;
+		sdata->u.mgd.flags &= ~IEEE80211_STA_MFP_ENABLED;
+	}
+
+	if (req->control_port)
+		sdata->u.mgd.flags |= IEEE80211_STA_CONTROL_PORT;
+	else
+		sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
+
 	sdata->u.mgd.flags |= IEEE80211_STA_EXT_SME;
 	sdata->u.mgd.state = IEEE80211_STA_MLME_ASSOCIATE;
 	ieee80211_sta_req_auth(sdata);
@@ -1267,25 +1281,106 @@ static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
 			    struct cfg80211_deauth_request *req)
 {
-	struct ieee80211_sub_if_data *sdata;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	/* TODO: req->ie */
+	/* TODO: req->ie, req->peer_addr */
 	return ieee80211_sta_deauthenticate(sdata, req->reason_code);
 }
 
 static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
 			      struct cfg80211_disassoc_request *req)
 {
-	struct ieee80211_sub_if_data *sdata;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	/* TODO: req->ie */
+	/* TODO: req->ie, req->peer_addr */
 	return ieee80211_sta_disassociate(sdata, req->reason_code);
 }
 
+static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+			       struct cfg80211_ibss_params *params)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	return ieee80211_ibss_join(sdata, params);
+}
+
+static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	return ieee80211_ibss_leave(sdata);
+}
+
+static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	int err;
+
+	if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+		err = drv_set_rts_threshold(local, wiphy->rts_threshold);
+
+		if (err)
+			return err;
+	}
+
+	if (changed & WIPHY_PARAM_RETRY_SHORT)
+		local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
+	if (changed & WIPHY_PARAM_RETRY_LONG)
+		local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
+	if (changed &
+	    (WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
+
+	return 0;
+}
+
+static int ieee80211_set_tx_power(struct wiphy *wiphy,
+				  enum tx_power_setting type, int dbm)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_channel *chan = local->hw.conf.channel;
+	u32 changes = 0;
+
+	switch (type) {
+	case TX_POWER_AUTOMATIC:
+		local->user_power_level = -1;
+		break;
+	case TX_POWER_LIMITED:
+		if (dbm < 0)
+			return -EINVAL;
+		local->user_power_level = dbm;
+		break;
+	case TX_POWER_FIXED:
+		if (dbm < 0)
+			return -EINVAL;
+		/* TODO: move to cfg80211 when it knows the channel */
+		if (dbm > chan->max_power)
+			return -EINVAL;
+		local->user_power_level = dbm;
+		break;
+	}
+
+	ieee80211_hw_config(local, changes);
+
+	return 0;
+}
+
+static int ieee80211_get_tx_power(struct wiphy *wiphy, int *dbm)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	*dbm = local->hw.conf.power_level;
+
+	return 0;
+}
+
+static void ieee80211_rfkill_poll(struct wiphy *wiphy)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	drv_rfkill_poll(local);
+}
+
 struct cfg80211_ops mac80211_config_ops = {
 	.add_virtual_intf = ieee80211_add_iface,
 	.del_virtual_intf = ieee80211_del_iface,
@@ -1322,4 +1417,10 @@ struct cfg80211_ops mac80211_config_ops = {
 	.assoc = ieee80211_assoc,
 	.deauth = ieee80211_deauth,
 	.disassoc = ieee80211_disassoc,
+	.join_ibss = ieee80211_join_ibss,
+	.leave_ibss = ieee80211_leave_ibss,
+	.set_wiphy_params = ieee80211_set_wiphy_params,
+	.set_tx_power = ieee80211_set_tx_power,
+	.get_tx_power = ieee80211_get_tx_power,
+	.rfkill_poll = ieee80211_rfkill_poll,
 };
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 210b9b6fecd..11c72311f35 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/rtnetlink.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "debugfs.h"
 
@@ -51,14 +52,6 @@ static const struct file_operations name## _ops = {			\
 
 DEBUGFS_READONLY_FILE(frequency, 20, "%d",
 		      local->hw.conf.channel->center_freq);
-DEBUGFS_READONLY_FILE(rts_threshold, 20, "%d",
-		      local->rts_threshold);
-DEBUGFS_READONLY_FILE(fragmentation_threshold, 20, "%d",
-		      local->fragmentation_threshold);
-DEBUGFS_READONLY_FILE(short_retry_limit, 20, "%d",
-		      local->hw.conf.short_frame_max_tx_count);
-DEBUGFS_READONLY_FILE(long_retry_limit, 20, "%d",
-		      local->hw.conf.long_frame_max_tx_count);
 DEBUGFS_READONLY_FILE(total_ps_buffered, 20, "%d",
 		      local->total_ps_buffered);
 DEBUGFS_READONLY_FILE(wep_iv, 20, "%#08x",
@@ -70,11 +63,10 @@ static ssize_t tsf_read(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
 	struct ieee80211_local *local = file->private_data;
-	u64 tsf = 0;
+	u64 tsf;
 	char buf[100];
 
-	if (local->ops->get_tsf)
-		tsf = local->ops->get_tsf(local_to_hw(local));
+	tsf = drv_get_tsf(local);
 
 	snprintf(buf, sizeof(buf), "0x%016llx\n", (unsigned long long) tsf);
 
@@ -97,13 +89,13 @@ static ssize_t tsf_write(struct file *file,
 
 	if (strncmp(buf, "reset", 5) == 0) {
 		if (local->ops->reset_tsf) {
-			local->ops->reset_tsf(local_to_hw(local));
+			drv_reset_tsf(local);
 			printk(KERN_INFO "%s: debugfs reset TSF\n", wiphy_name(local->hw.wiphy));
 		}
 	} else {
 		tsf = simple_strtoul(buf, NULL, 0);
 		if (local->ops->set_tsf) {
-			local->ops->set_tsf(local_to_hw(local), tsf);
+			drv_set_tsf(local, tsf);
 			printk(KERN_INFO "%s: debugfs set TSF to %#018llx\n", wiphy_name(local->hw.wiphy), tsf);
 		}
 	}
@@ -135,6 +127,42 @@ static const struct file_operations reset_ops = {
 	.open = mac80211_open_file_generic,
 };
 
+static ssize_t noack_read(struct file *file, char __user *user_buf,
+			  size_t count, loff_t *ppos)
+{
+	struct ieee80211_local *local = file->private_data;
+	int res;
+	char buf[10];
+
+	res = scnprintf(buf, sizeof(buf), "%d\n", local->wifi_wme_noack_test);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static ssize_t noack_write(struct file *file,
+			   const char __user *user_buf,
+			   size_t count, loff_t *ppos)
+{
+	struct ieee80211_local *local = file->private_data;
+	char buf[10];
+	size_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+	buf[len] = '\0';
+
+	local->wifi_wme_noack_test = !!simple_strtoul(buf, NULL, 0);
+
+	return count;
+}
+
+static const struct file_operations noack_ops = {
+	.read = noack_read,
+	.write = noack_write,
+	.open = mac80211_open_file_generic
+};
+
 /* statistics stuff */
 
 #define DEBUGFS_STATS_FILE(name, buflen, fmt, value...)			\
@@ -150,14 +178,12 @@ static ssize_t format_devstat_counter(struct ieee80211_local *local,
 	char buf[20];
 	int res;
 
-	if (!local->ops->get_stats)
-		return -EOPNOTSUPP;
-
 	rtnl_lock();
-	res = local->ops->get_stats(local_to_hw(local), &stats);
+	res = drv_get_stats(local, &stats);
 	rtnl_unlock();
-	if (!res)
-		res = printvalue(&stats, buf, sizeof(buf));
+	if (res)
+		return res;
+	res = printvalue(&stats, buf, sizeof(buf));
 	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
 }
 
@@ -269,14 +295,11 @@ void debugfs_hw_add(struct ieee80211_local *local)
 	local->debugfs.keys = debugfs_create_dir("keys", phyd);
 
 	DEBUGFS_ADD(frequency);
-	DEBUGFS_ADD(rts_threshold);
-	DEBUGFS_ADD(fragmentation_threshold);
-	DEBUGFS_ADD(short_retry_limit);
-	DEBUGFS_ADD(long_retry_limit);
 	DEBUGFS_ADD(total_ps_buffered);
 	DEBUGFS_ADD(wep_iv);
 	DEBUGFS_ADD(tsf);
 	DEBUGFS_ADD_MODE(reset, 0200);
+	DEBUGFS_ADD(noack);
 
 	statsd = debugfs_create_dir("statistics", phyd);
 	local->debugfs.statistics = statsd;
@@ -324,14 +347,11 @@ void debugfs_hw_add(struct ieee80211_local *local)
 void debugfs_hw_del(struct ieee80211_local *local)
 {
 	DEBUGFS_DEL(frequency);
-	DEBUGFS_DEL(rts_threshold);
-	DEBUGFS_DEL(fragmentation_threshold);
-	DEBUGFS_DEL(short_retry_limit);
-	DEBUGFS_DEL(long_retry_limit);
 	DEBUGFS_DEL(total_ps_buffered);
 	DEBUGFS_DEL(wep_iv);
 	DEBUGFS_DEL(tsf);
 	DEBUGFS_DEL(reset);
+	DEBUGFS_DEL(noack);
 
 	DEBUGFS_STATS_DEL(transmitted_fragment_count);
 	DEBUGFS_STATS_DEL(multicast_transmitted_frame_count);
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
new file mode 100644
index 00000000000..b13446afd48
--- /dev/null
+++ b/net/mac80211/driver-ops.h
@@ -0,0 +1,191 @@
+#ifndef __MAC80211_DRIVER_OPS
+#define __MAC80211_DRIVER_OPS
+
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+
+static inline int drv_tx(struct ieee80211_local *local, struct sk_buff *skb)
+{
+	return local->ops->tx(&local->hw, skb);
+}
+
+static inline int drv_start(struct ieee80211_local *local)
+{
+	return local->ops->start(&local->hw);
+}
+
+static inline void drv_stop(struct ieee80211_local *local)
+{
+	local->ops->stop(&local->hw);
+}
+
+static inline int drv_add_interface(struct ieee80211_local *local,
+				    struct ieee80211_if_init_conf *conf)
+{
+	return local->ops->add_interface(&local->hw, conf);
+}
+
+static inline void drv_remove_interface(struct ieee80211_local *local,
+					struct ieee80211_if_init_conf *conf)
+{
+	local->ops->remove_interface(&local->hw, conf);
+}
+
+static inline int drv_config(struct ieee80211_local *local, u32 changed)
+{
+	return local->ops->config(&local->hw, changed);
+}
+
+static inline void drv_bss_info_changed(struct ieee80211_local *local,
+					struct ieee80211_vif *vif,
+					struct ieee80211_bss_conf *info,
+					u32 changed)
+{
+	if (local->ops->bss_info_changed)
+		local->ops->bss_info_changed(&local->hw, vif, info, changed);
+}
+
+static inline void drv_configure_filter(struct ieee80211_local *local,
+					unsigned int changed_flags,
+					unsigned int *total_flags,
+					int mc_count,
+					struct dev_addr_list *mc_list)
+{
+	local->ops->configure_filter(&local->hw, changed_flags, total_flags,
+				     mc_count, mc_list);
+}
+
+static inline int drv_set_tim(struct ieee80211_local *local,
+			      struct ieee80211_sta *sta, bool set)
+{
+	if (local->ops->set_tim)
+		return local->ops->set_tim(&local->hw, sta, set);
+	return 0;
+}
+
+static inline int drv_set_key(struct ieee80211_local *local,
+			      enum set_key_cmd cmd, struct ieee80211_vif *vif,
+			      struct ieee80211_sta *sta,
+			      struct ieee80211_key_conf *key)
+{
+	return local->ops->set_key(&local->hw, cmd, vif, sta, key);
+}
+
+static inline void drv_update_tkip_key(struct ieee80211_local *local,
+				       struct ieee80211_key_conf *conf,
+				       const u8 *address, u32 iv32,
+				       u16 *phase1key)
+{
+	if (local->ops->update_tkip_key)
+		local->ops->update_tkip_key(&local->hw, conf, address,
+					    iv32, phase1key);
+}
+
+static inline int drv_hw_scan(struct ieee80211_local *local,
+			      struct cfg80211_scan_request *req)
+{
+	return local->ops->hw_scan(&local->hw, req);
+}
+
+static inline void drv_sw_scan_start(struct ieee80211_local *local)
+{
+	if (local->ops->sw_scan_start)
+		local->ops->sw_scan_start(&local->hw);
+}
+
+static inline void drv_sw_scan_complete(struct ieee80211_local *local)
+{
+	if (local->ops->sw_scan_complete)
+		local->ops->sw_scan_complete(&local->hw);
+}
+
+static inline int drv_get_stats(struct ieee80211_local *local,
+				struct ieee80211_low_level_stats *stats)
+{
+	if (!local->ops->get_stats)
+		return -EOPNOTSUPP;
+	return local->ops->get_stats(&local->hw, stats);
+}
+
+static inline void drv_get_tkip_seq(struct ieee80211_local *local,
+				    u8 hw_key_idx, u32 *iv32, u16 *iv16)
+{
+	if (local->ops->get_tkip_seq)
+		local->ops->get_tkip_seq(&local->hw, hw_key_idx, iv32, iv16);
+}
+
+static inline int drv_set_rts_threshold(struct ieee80211_local *local,
+					u32 value)
+{
+	if (local->ops->set_rts_threshold)
+		return local->ops->set_rts_threshold(&local->hw, value);
+	return 0;
+}
+
+static inline void drv_sta_notify(struct ieee80211_local *local,
+				  struct ieee80211_vif *vif,
+				  enum sta_notify_cmd cmd,
+				  struct ieee80211_sta *sta)
+{
+	if (local->ops->sta_notify)
+		local->ops->sta_notify(&local->hw, vif, cmd, sta);
+}
+
+static inline int drv_conf_tx(struct ieee80211_local *local, u16 queue,
+			      const struct ieee80211_tx_queue_params *params)
+{
+	if (local->ops->conf_tx)
+		return local->ops->conf_tx(&local->hw, queue, params);
+	return -EOPNOTSUPP;
+}
+
+static inline int drv_get_tx_stats(struct ieee80211_local *local,
+				   struct ieee80211_tx_queue_stats *stats)
+{
+	return local->ops->get_tx_stats(&local->hw, stats);
+}
+
+static inline u64 drv_get_tsf(struct ieee80211_local *local)
+{
+	if (local->ops->get_tsf)
+		return local->ops->get_tsf(&local->hw);
+	return -1ULL;
+}
+
+static inline void drv_set_tsf(struct ieee80211_local *local, u64 tsf)
+{
+	if (local->ops->set_tsf)
+		local->ops->set_tsf(&local->hw, tsf);
+}
+
+static inline void drv_reset_tsf(struct ieee80211_local *local)
+{
+	if (local->ops->reset_tsf)
+		local->ops->reset_tsf(&local->hw);
+}
+
+static inline int drv_tx_last_beacon(struct ieee80211_local *local)
+{
+	if (local->ops->tx_last_beacon)
+		return local->ops->tx_last_beacon(&local->hw);
+	return 1;
+}
+
+static inline int drv_ampdu_action(struct ieee80211_local *local,
+				   enum ieee80211_ampdu_mlme_action action,
+				   struct ieee80211_sta *sta, u16 tid,
+				   u16 *ssn)
+{
+	if (local->ops->ampdu_action)
+		return local->ops->ampdu_action(&local->hw, action,
+						sta, tid, ssn);
+	return -EOPNOTSUPP;
+}
+
+
+static inline void drv_rfkill_poll(struct ieee80211_local *local)
+{
+	if (local->ops->rfkill_poll)
+		local->ops->rfkill_poll(&local->hw);
+}
+#endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/event.c b/net/mac80211/event.c
index 0d95561c0ee..f288d01a634 100644
--- a/net/mac80211/event.c
+++ b/net/mac80211/event.c
@@ -12,12 +12,12 @@
 #include "ieee80211_i.h"
 
 /*
- * indicate a failed Michael MIC to userspace; the passed packet
- * (in the variable hdr) must be long enough to extract the TKIP
- * fields like TSC
+ * Indicate a failed Michael MIC to userspace. If the caller knows the TSC of
+ * the frame that generated the MIC failure (i.e., if it was provided by the
+ * driver or is still in the frame), it should provide that information.
  */
 void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
-				     struct ieee80211_hdr *hdr)
+				     struct ieee80211_hdr *hdr, const u8 *tsc)
 {
 	union iwreq_data wrqu;
 	char *buf = kmalloc(128, GFP_ATOMIC);
@@ -34,8 +34,9 @@ void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int ke
 		kfree(buf);
 	}
 
-	/*
-	 * TODO: re-add support for sending MIC failure indication
-	 * with all info via nl80211
-	 */
+	cfg80211_michael_mic_failure(sdata->dev, hdr->addr2,
+				     (hdr->addr1[0] & 0x01) ?
+				     NL80211_KEYTYPE_GROUP :
+				     NL80211_KEYTYPE_PAIRWISE,
+				     keyidx, tsc);
 }
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 4e3c72f20de..0891bfb0699 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/ieee80211.h>
-#include <net/wireless.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "rate.h"
@@ -83,89 +82,6 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
 		ht_cap->mcs.rx_mask[32/8] |= 1;
 }
 
-/*
- * ieee80211_enable_ht should be called only after the operating band
- * has been determined as ht configuration depends on the hw's
- * HT abilities for a specific band.
- */
-u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
-			struct ieee80211_ht_info *hti,
-			u16 ap_ht_cap_flags)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-	struct ieee80211_bss_ht_conf ht;
-	struct sta_info *sta;
-	u32 changed = 0;
-	bool enable_ht = true, ht_changed;
-	enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
-
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
-	memset(&ht, 0, sizeof(ht));
-
-	/* HT is not supported */
-	if (!sband->ht_cap.ht_supported)
-		enable_ht = false;
-
-	/* check that channel matches the right operating channel */
-	if (local->hw.conf.channel->center_freq !=
-	    ieee80211_channel_to_frequency(hti->control_chan))
-		enable_ht = false;
-
-	if (enable_ht) {
-		channel_type = NL80211_CHAN_HT20;
-
-		if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
-		    (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
-		    (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
-			switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
-			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-				channel_type = NL80211_CHAN_HT40PLUS;
-				break;
-			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-				channel_type = NL80211_CHAN_HT40MINUS;
-				break;
-			}
-		}
-	}
-
-	ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
-		     channel_type != local->hw.conf.channel_type;
-
-	local->oper_channel_type = channel_type;
-
-	if (ht_changed) {
-                /* channel_type change automatically detected */
-		ieee80211_hw_config(local, 0);
-
-		rcu_read_lock();
-
-		sta = sta_info_get(local, ifmgd->bssid);
-		if (sta)
-			rate_control_rate_update(local, sband, sta,
-						 IEEE80211_RC_HT_CHANGED);
-
-		rcu_read_unlock();
-
-        }
-
-	/* disable HT */
-	if (!enable_ht)
-		return 0;
-
-	ht.operation_mode = le16_to_cpu(hti->operation_mode);
-
-	/* if bss configuration changed store the new one */
-	if (memcmp(&sdata->vif.bss_conf.ht, &ht, sizeof(ht))) {
-		changed |= BSS_CHANGED_HT;
-		sdata->vif.bss_conf.ht = ht;
-	}
-
-	return changed;
-}
-
 void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta)
 {
 	int i;
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 3201e1f9636..0b30277eb36 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -22,6 +22,7 @@
 #include <asm/unaligned.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 
 #define IEEE80211_SCAN_INTERVAL (2 * HZ)
@@ -59,74 +60,65 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata,
 				    sdata->u.ibss.bssid, 0);
 }
 
-static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
-				     const u8 *bssid, const int beacon_int,
-				     const int freq,
-				     const size_t supp_rates_len,
-				     const u8 *supp_rates,
-				     const u16 capability, u64 tsf)
+static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
+				      const u8 *bssid, const int beacon_int,
+				      struct ieee80211_channel *chan,
+				      const u32 basic_rates,
+				      const u16 capability, u64 tsf)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
-	int res = 0, rates, i, j;
+	int rates, i;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
 	u8 *pos;
 	struct ieee80211_supported_band *sband;
-	union iwreq_data wrqu;
+	u32 bss_change;
+	u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
 
-	if (local->ops->reset_tsf) {
-		/* Reset own TSF to allow time synchronization work. */
-		local->ops->reset_tsf(local_to_hw(local));
-	}
+	/* Reset own TSF to allow time synchronization work. */
+	drv_reset_tsf(local);
 
-	if ((ifibss->flags & IEEE80211_IBSS_PREV_BSSID_SET) &&
-	   memcmp(ifibss->bssid, bssid, ETH_ALEN) == 0)
-		return res;
+	skb = ifibss->skb;
+	rcu_assign_pointer(ifibss->presp, NULL);
+	synchronize_rcu();
+	skb->data = skb->head;
+	skb->len = 0;
+	skb_reset_tail_pointer(skb);
+	skb_reserve(skb, sdata->local->hw.extra_tx_headroom);
 
-	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
-	if (!skb) {
-		printk(KERN_DEBUG "%s: failed to allocate buffer for probe "
-		       "response\n", sdata->dev->name);
-		return -ENOMEM;
-	}
-
-	if (!(ifibss->flags & IEEE80211_IBSS_PREV_BSSID_SET)) {
-		/* Remove possible STA entries from other IBSS networks. */
-		sta_info_flush_delayed(sdata);
-	}
+	if (memcmp(ifibss->bssid, bssid, ETH_ALEN))
+		sta_info_flush(sdata->local, sdata);
 
 	memcpy(ifibss->bssid, bssid, ETH_ALEN);
-	res = ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID);
-	if (res)
-		return res;
-
-	local->hw.conf.beacon_int = beacon_int >= 10 ? beacon_int : 10;
 
-	sdata->drop_unencrypted = capability &
-		WLAN_CAPABILITY_PRIVACY ? 1 : 0;
+	sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
 
-	res = ieee80211_set_freq(sdata, freq);
+	local->oper_channel = chan;
+	local->oper_channel_type = NL80211_CHAN_NO_HT;
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
 
-	if (res)
-		return res;
+	sband = local->hw.wiphy->bands[chan->band];
 
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+	/* build supported rates array */
+	pos = supp_rates;
+	for (i = 0; i < sband->n_bitrates; i++) {
+		int rate = sband->bitrates[i].bitrate;
+		u8 basic = 0;
+		if (basic_rates & BIT(i))
+			basic = 0x80;
+		*pos++ = basic | (u8) (rate / 5);
+	}
 
 	/* Build IBSS probe response */
-
-	skb_reserve(skb, local->hw.extra_tx_headroom);
-
-	mgmt = (struct ieee80211_mgmt *)
-		skb_put(skb, 24 + sizeof(mgmt->u.beacon));
+	mgmt = (void *) skb_put(skb, 24 + sizeof(mgmt->u.beacon));
 	memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
 	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 					  IEEE80211_STYPE_PROBE_RESP);
 	memset(mgmt->da, 0xff, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 	memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN);
-	mgmt->u.beacon.beacon_int =
-		cpu_to_le16(local->hw.conf.beacon_int);
+	mgmt->u.beacon.beacon_int = cpu_to_le16(beacon_int);
 	mgmt->u.beacon.timestamp = cpu_to_le64(tsf);
 	mgmt->u.beacon.capab_info = cpu_to_le16(capability);
 
@@ -135,7 +127,7 @@ static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 	*pos++ = ifibss->ssid_len;
 	memcpy(pos, ifibss->ssid, ifibss->ssid_len);
 
-	rates = supp_rates_len;
+	rates = sband->n_bitrates;
 	if (rates > 8)
 		rates = 8;
 	pos = skb_put(skb, 2 + rates);
@@ -147,7 +139,7 @@ static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 		pos = skb_put(skb, 2 + 1);
 		*pos++ = WLAN_EID_DS_PARAMS;
 		*pos++ = 1;
-		*pos++ = ieee80211_frequency_to_channel(freq);
+		*pos++ = ieee80211_frequency_to_channel(chan->center_freq);
 	}
 
 	pos = skb_put(skb, 2 + 2);
@@ -157,51 +149,73 @@ static int __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 	*pos++ = 0;
 	*pos++ = 0;
 
-	if (supp_rates_len > 8) {
-		rates = supp_rates_len - 8;
+	if (sband->n_bitrates > 8) {
+		rates = sband->n_bitrates - 8;
 		pos = skb_put(skb, 2 + rates);
 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
 		*pos++ = rates;
 		memcpy(pos, &supp_rates[8], rates);
 	}
 
-	ifibss->probe_resp = skb;
+	if (ifibss->ie_len)
+		memcpy(skb_put(skb, ifibss->ie_len),
+		       ifibss->ie, ifibss->ie_len);
 
-	ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
-				   IEEE80211_IFCC_BEACON_ENABLED);
+	rcu_assign_pointer(ifibss->presp, skb);
 
+	sdata->vif.bss_conf.beacon_int = beacon_int;
+	bss_change = BSS_CHANGED_BEACON_INT;
+	bss_change |= ieee80211_reset_erp_info(sdata);
+	bss_change |= BSS_CHANGED_BSSID;
+	bss_change |= BSS_CHANGED_BEACON;
+	bss_change |= BSS_CHANGED_BEACON_ENABLED;
+	ieee80211_bss_info_change_notify(sdata, bss_change);
 
-	rates = 0;
-	for (i = 0; i < supp_rates_len; i++) {
-		int bitrate = (supp_rates[i] & 0x7f) * 5;
-		for (j = 0; j < sband->n_bitrates; j++)
-			if (sband->bitrates[j].bitrate == bitrate)
-				rates |= BIT(j);
-	}
+	ieee80211_sta_def_wmm_params(sdata, sband->n_bitrates, supp_rates);
 
-	ieee80211_sta_def_wmm_params(sdata, supp_rates_len, supp_rates);
-
-	ifibss->flags |= IEEE80211_IBSS_PREV_BSSID_SET;
 	ifibss->state = IEEE80211_IBSS_MLME_JOINED;
-	mod_timer(&ifibss->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
-
-	memset(&wrqu, 0, sizeof(wrqu));
-	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
-	wireless_send_event(sdata->dev, SIOCGIWAP, &wrqu, NULL);
+	mod_timer(&ifibss->timer,
+		  round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
 
-	return res;
+	cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel,
+				  mgmt, skb->len, 0, GFP_KERNEL);
+	cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL);
 }
 
-static int ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
-				   struct ieee80211_bss *bss)
+static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
+				    struct ieee80211_bss *bss)
 {
-	return __ieee80211_sta_join_ibss(sdata,
-					 bss->cbss.bssid,
-					 bss->cbss.beacon_interval,
-					 bss->cbss.channel->center_freq,
-					 bss->supp_rates_len, bss->supp_rates,
-					 bss->cbss.capability,
-					 bss->cbss.tsf);
+	struct ieee80211_supported_band *sband;
+	u32 basic_rates;
+	int i, j;
+	u16 beacon_int = bss->cbss.beacon_interval;
+
+	if (beacon_int < 10)
+		beacon_int = 10;
+
+	sband = sdata->local->hw.wiphy->bands[bss->cbss.channel->band];
+
+	basic_rates = 0;
+
+	for (i = 0; i < bss->supp_rates_len; i++) {
+		int rate = (bss->supp_rates[i] & 0x7f) * 5;
+		bool is_basic = !!(bss->supp_rates[i] & 0x80);
+
+		for (j = 0; j < sband->n_bitrates; j++) {
+			if (sband->bitrates[j].bitrate == rate) {
+				if (is_basic)
+					basic_rates |= BIT(j);
+				break;
+			}
+		}
+	}
+
+	__ieee80211_sta_join_ibss(sdata, bss->cbss.bssid,
+				  beacon_int,
+				  bss->cbss.channel,
+				  basic_rates,
+				  bss->cbss.capability,
+				  bss->cbss.tsf);
 }
 
 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
@@ -277,7 +291,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 		goto put_bss;
 
 	/* we use a fixed BSSID */
-	if (sdata->u.ibss.flags & IEEE80211_IBSS_BSSID_SET)
+	if (sdata->u.ibss.bssid)
 		goto put_bss;
 
 	/* not an IBSS */
@@ -322,12 +336,13 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 				bitrates[rx_status->rate_idx].bitrate;
 
 		rx_timestamp = rx_status->mactime + (24 * 8 * 10 / rate);
-	} else if (local && local->ops && local->ops->get_tsf)
-		/* second best option: get current TSF */
-		rx_timestamp = local->ops->get_tsf(local_to_hw(local));
-	else
-		/* can't merge without knowing the TSF */
-		rx_timestamp = -1LLU;
+	} else {
+		/*
+		 * second best option: get current TSF
+		 * (will return -1 if not supported)
+		 */
+		rx_timestamp = drv_get_tsf(local);
+	}
 
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	printk(KERN_DEBUG "RX beacon SA=%pM BSSID="
@@ -369,13 +384,14 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
 	struct sta_info *sta;
 	int band = local->hw.conf.channel->band;
 
-	/* TODO: Could consider removing the least recently used entry and
-	 * allow new one to be added. */
+	/*
+	 * XXX: Consider removing the least recently used entry and
+	 * 	allow new one to be added.
+	 */
 	if (local->num_sta >= IEEE80211_IBSS_MAX_STA_ENTRIES) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: No room for a new IBSS STA "
-			       "entry %pM\n", sdata->dev->name, addr);
-		}
+		if (net_ratelimit())
+			printk(KERN_DEBUG "%s: No room for a new IBSS STA entry %pM\n",
+			       sdata->dev->name, addr);
 		return NULL;
 	}
 
@@ -432,41 +448,33 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	mod_timer(&ifibss->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
+	mod_timer(&ifibss->timer,
+		  round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
 
 	ieee80211_sta_expire(sdata, IEEE80211_IBSS_INACTIVITY_LIMIT);
+
 	if (ieee80211_sta_active_ibss(sdata))
 		return;
 
-	if ((ifibss->flags & IEEE80211_IBSS_BSSID_SET) &&
-	    (!(ifibss->flags & IEEE80211_IBSS_AUTO_CHANNEL_SEL)))
+	if (ifibss->fixed_channel)
 		return;
 
 	printk(KERN_DEBUG "%s: No active IBSS STAs - trying to scan for other "
 	       "IBSS networks with same SSID (merge)\n", sdata->dev->name);
 
-	/* XXX maybe racy? */
-	if (sdata->local->scan_req)
-		return;
-
-	memcpy(sdata->local->int_scan_req.ssids[0].ssid,
-	       ifibss->ssid, IEEE80211_MAX_SSID_LEN);
-	sdata->local->int_scan_req.ssids[0].ssid_len = ifibss->ssid_len;
-	ieee80211_request_scan(sdata, &sdata->local->int_scan_req);
+	ieee80211_request_internal_scan(sdata, ifibss->ssid, ifibss->ssid_len);
 }
 
-static int ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
+static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
-	u8 *pos;
 	u8 bssid[ETH_ALEN];
-	u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
 	u16 capability;
 	int i;
 
-	if (ifibss->flags & IEEE80211_IBSS_BSSID_SET) {
+	if (ifibss->fixed_bssid) {
 		memcpy(bssid, ifibss->bssid, ETH_ALEN);
 	} else {
 		/* Generate random, not broadcast, locally administered BSSID. Mix in
@@ -482,10 +490,7 @@ static int ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
 	printk(KERN_DEBUG "%s: Creating new IBSS network, BSSID %pM\n",
 	       sdata->dev->name, bssid);
 
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
-	if (local->hw.conf.beacon_int == 0)
-		local->hw.conf.beacon_int = 100;
+	sband = local->hw.wiphy->bands[ifibss->channel->band];
 
 	capability = WLAN_CAPABILITY_IBSS;
 
@@ -494,29 +499,20 @@ static int ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
 	else
 		sdata->drop_unencrypted = 0;
 
-	pos = supp_rates;
-	for (i = 0; i < sband->n_bitrates; i++) {
-		int rate = sband->bitrates[i].bitrate;
-		*pos++ = (u8) (rate / 5);
-	}
-
-	return __ieee80211_sta_join_ibss(sdata,
-					 bssid, local->hw.conf.beacon_int,
-					 local->hw.conf.channel->center_freq,
-					 sband->n_bitrates, supp_rates,
-					 capability, 0);
+	__ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int,
+				  ifibss->channel, 3, /* first two are basic */
+				  capability, 0);
 }
 
-static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
+static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_bss *bss;
+	struct ieee80211_channel *chan = NULL;
 	const u8 *bssid = NULL;
 	int active_ibss;
-
-	if (ifibss->ssid_len == 0)
-		return -EINVAL;
+	u16 capability;
 
 	active_ibss = ieee80211_sta_active_ibss(sdata);
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
@@ -525,14 +521,23 @@ static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 
 	if (active_ibss)
-		return 0;
+		return;
 
-	if (ifibss->flags & IEEE80211_IBSS_BSSID_SET)
+	capability = WLAN_CAPABILITY_IBSS;
+	if (sdata->default_key)
+		capability |= WLAN_CAPABILITY_PRIVACY;
+
+	if (ifibss->fixed_bssid)
 		bssid = ifibss->bssid;
-	bss = (void *)cfg80211_get_bss(local->hw.wiphy, NULL, bssid,
+	if (ifibss->fixed_channel)
+		chan = ifibss->channel;
+	if (!is_zero_ether_addr(ifibss->bssid))
+		bssid = ifibss->bssid;
+	bss = (void *)cfg80211_get_bss(local->hw.wiphy, chan, bssid,
 				       ifibss->ssid, ifibss->ssid_len,
-				       WLAN_CAPABILITY_IBSS,
-				       WLAN_CAPABILITY_IBSS);
+				       WLAN_CAPABILITY_IBSS |
+				       WLAN_CAPABILITY_PRIVACY,
+				       capability);
 
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	if (bss)
@@ -540,18 +545,14 @@ static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 		       "%pM\n", bss->cbss.bssid, ifibss->bssid);
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 
-	if (bss &&
-	    (!(ifibss->flags & IEEE80211_IBSS_PREV_BSSID_SET) ||
-	     memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN))) {
-		int ret;
-
+	if (bss && memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) {
 		printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM"
 		       " based on configured SSID\n",
 		       sdata->dev->name, bss->cbss.bssid);
 
-		ret = ieee80211_sta_join_ibss(sdata, bss);
+		ieee80211_sta_join_ibss(sdata, bss);
 		ieee80211_rx_bss_put(local, bss);
-		return ret;
+		return;
 	} else if (bss)
 		ieee80211_rx_bss_put(local, bss);
 
@@ -562,29 +563,24 @@ static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 	/* Selected IBSS not found in current scan results - try to scan */
 	if (ifibss->state == IEEE80211_IBSS_MLME_JOINED &&
 	    !ieee80211_sta_active_ibss(sdata)) {
-		mod_timer(&ifibss->timer, jiffies +
-					  IEEE80211_IBSS_MERGE_INTERVAL);
-	} else if (time_after(jiffies, local->last_scan_completed +
+		mod_timer(&ifibss->timer,
+			  round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
+	} else if (time_after(jiffies, ifibss->last_scan_completed +
 					IEEE80211_SCAN_INTERVAL)) {
 		printk(KERN_DEBUG "%s: Trigger new scan to find an IBSS to "
 		       "join\n", sdata->dev->name);
 
-		/* XXX maybe racy? */
-		if (local->scan_req)
-			return -EBUSY;
-
-		memcpy(local->int_scan_req.ssids[0].ssid,
-		       ifibss->ssid, IEEE80211_MAX_SSID_LEN);
-		local->int_scan_req.ssids[0].ssid_len = ifibss->ssid_len;
-		return ieee80211_request_scan(sdata, &local->int_scan_req);
+		ieee80211_request_internal_scan(sdata, ifibss->ssid,
+						ifibss->ssid_len);
 	} else if (ifibss->state != IEEE80211_IBSS_MLME_JOINED) {
 		int interval = IEEE80211_SCAN_INTERVAL;
 
 		if (time_after(jiffies, ifibss->ibss_join_req +
 			       IEEE80211_IBSS_JOIN_TIMEOUT)) {
-			if (!(local->oper_channel->flags &
-						IEEE80211_CHAN_NO_IBSS))
-				return ieee80211_sta_create_ibss(sdata);
+			if (!(local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS)) {
+				ieee80211_sta_create_ibss(sdata);
+				return;
+			}
 			printk(KERN_DEBUG "%s: IBSS not allowed on"
 			       " %d MHz\n", sdata->dev->name,
 			       local->hw.conf.channel->center_freq);
@@ -595,11 +591,9 @@ static int ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
 		}
 
 		ifibss->state = IEEE80211_IBSS_MLME_SEARCH;
-		mod_timer(&ifibss->timer, jiffies + interval);
-		return 0;
+		mod_timer(&ifibss->timer,
+			  round_jiffies(jiffies + interval));
 	}
-
-	return 0;
 }
 
 static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
@@ -614,13 +608,10 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 	u8 *pos, *end;
 
 	if (ifibss->state != IEEE80211_IBSS_MLME_JOINED ||
-	    len < 24 + 2 || !ifibss->probe_resp)
+	    len < 24 + 2 || !ifibss->presp)
 		return;
 
-	if (local->ops->tx_last_beacon)
-		tx_last_beacon = local->ops->tx_last_beacon(local_to_hw(local));
-	else
-		tx_last_beacon = 1;
+	tx_last_beacon = drv_tx_last_beacon(local);
 
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 	printk(KERN_DEBUG "%s: RX ProbeReq SA=%pM DA=%pM BSSID=%pM"
@@ -649,13 +640,13 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 	}
 	if (pos[1] != 0 &&
 	    (pos[1] != ifibss->ssid_len ||
-	     memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len) != 0)) {
+	     !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
 		/* Ignore ProbeReq for foreign SSID */
 		return;
 	}
 
 	/* Reply with ProbeResp */
-	skb = skb_copy(ifibss->probe_resp, GFP_KERNEL);
+	skb = skb_copy(ifibss->presp, GFP_KERNEL);
 	if (!skb)
 		return;
 
@@ -746,6 +737,9 @@ static void ieee80211_ibss_work(struct work_struct *work)
 	struct ieee80211_if_ibss *ifibss;
 	struct sk_buff *skb;
 
+	if (WARN_ON(local->suspended))
+		return;
+
 	if (!netif_running(sdata->dev))
 		return;
 
@@ -782,101 +776,63 @@ static void ieee80211_ibss_timer(unsigned long data)
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 	struct ieee80211_local *local = sdata->local;
 
+	if (local->quiescing) {
+		ifibss->timer_running = true;
+		return;
+	}
+
 	set_bit(IEEE80211_IBSS_REQ_RUN, &ifibss->request);
 	queue_work(local->hw.workqueue, &ifibss->work);
 }
 
-void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata)
+#ifdef CONFIG_PM
+void ieee80211_ibss_quiesce(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	INIT_WORK(&ifibss->work, ieee80211_ibss_work);
-	setup_timer(&ifibss->timer, ieee80211_ibss_timer,
-		    (unsigned long) sdata);
-	skb_queue_head_init(&ifibss->skb_queue);
-
-	ifibss->flags |= IEEE80211_IBSS_AUTO_BSSID_SEL |
-			IEEE80211_IBSS_AUTO_CHANNEL_SEL;
+	cancel_work_sync(&ifibss->work);
+	if (del_timer_sync(&ifibss->timer))
+		ifibss->timer_running = true;
 }
 
-int ieee80211_ibss_commit(struct ieee80211_sub_if_data *sdata)
+void ieee80211_ibss_restart(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	ifibss->flags &= ~IEEE80211_IBSS_PREV_BSSID_SET;
-
-	if (ifibss->ssid_len)
-		ifibss->flags |= IEEE80211_IBSS_SSID_SET;
-	else
-		ifibss->flags &= ~IEEE80211_IBSS_SSID_SET;
-
-	ifibss->ibss_join_req = jiffies;
-	ifibss->state = IEEE80211_IBSS_MLME_SEARCH;
-	set_bit(IEEE80211_IBSS_REQ_RUN, &ifibss->request);
-
-	return 0;
-}
-
-int ieee80211_ibss_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len)
-{
-	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
-
-	if (len > IEEE80211_MAX_SSID_LEN)
-		return -EINVAL;
-
-	if (ifibss->ssid_len != len || memcmp(ifibss->ssid, ssid, len) != 0) {
-		memset(ifibss->ssid, 0, sizeof(ifibss->ssid));
-		memcpy(ifibss->ssid, ssid, len);
-		ifibss->ssid_len = len;
+	if (ifibss->timer_running) {
+		add_timer(&ifibss->timer);
+		ifibss->timer_running = false;
 	}
-
-	return ieee80211_ibss_commit(sdata);
-}
-
-int ieee80211_ibss_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len)
-{
-	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
-
-	memcpy(ssid, ifibss->ssid, ifibss->ssid_len);
-	*len = ifibss->ssid_len;
-
-	return 0;
 }
+#endif
 
-int ieee80211_ibss_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
+void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 
-	if (is_valid_ether_addr(bssid)) {
-		memcpy(ifibss->bssid, bssid, ETH_ALEN);
-		ifibss->flags |= IEEE80211_IBSS_BSSID_SET;
-	} else {
-		memset(ifibss->bssid, 0, ETH_ALEN);
-		ifibss->flags &= ~IEEE80211_IBSS_BSSID_SET;
-	}
-
-	if (netif_running(sdata->dev)) {
-		if (ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID)) {
-			printk(KERN_DEBUG "%s: Failed to config new BSSID to "
-			       "the low-level driver\n", sdata->dev->name);
-		}
-	}
-
-	return ieee80211_ibss_commit(sdata);
+	INIT_WORK(&ifibss->work, ieee80211_ibss_work);
+	setup_timer(&ifibss->timer, ieee80211_ibss_timer,
+		    (unsigned long) sdata);
+	skb_queue_head_init(&ifibss->skb_queue);
 }
 
 /* scan finished notification */
 void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local)
 {
-	struct ieee80211_sub_if_data *sdata = local->scan_sdata;
-	struct ieee80211_if_ibss *ifibss;
-
-	if (sdata && sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		ifibss = &sdata->u.ibss;
-		if ((!(ifibss->flags & IEEE80211_IBSS_PREV_BSSID_SET)) ||
-		    !ieee80211_sta_active_ibss(sdata))
-			ieee80211_sta_find_ibss(sdata);
+	struct ieee80211_sub_if_data *sdata;
+
+	mutex_lock(&local->iflist_mtx);
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+		if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
+			continue;
+		if (!sdata->u.ibss.ssid_len)
+			continue;
+		sdata->u.ibss.last_scan_completed = jiffies;
+		ieee80211_sta_find_ibss(sdata);
 	}
+	mutex_unlock(&local->iflist_mtx);
 }
 
 ieee80211_rx_result
@@ -906,3 +862,86 @@ ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 
 	return RX_DROP_MONITOR;
 }
+
+int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
+			struct cfg80211_ibss_params *params)
+{
+	struct sk_buff *skb;
+
+	if (params->bssid) {
+		memcpy(sdata->u.ibss.bssid, params->bssid, ETH_ALEN);
+		sdata->u.ibss.fixed_bssid = true;
+	} else
+		sdata->u.ibss.fixed_bssid = false;
+
+	sdata->vif.bss_conf.beacon_int = params->beacon_interval;
+
+	sdata->u.ibss.channel = params->channel;
+	sdata->u.ibss.fixed_channel = params->channel_fixed;
+
+	if (params->ie) {
+		sdata->u.ibss.ie = kmemdup(params->ie, params->ie_len,
+					   GFP_KERNEL);
+		if (sdata->u.ibss.ie)
+			sdata->u.ibss.ie_len = params->ie_len;
+	}
+
+	skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom +
+			    36 /* bitrates */ +
+			    34 /* SSID */ +
+			    3  /* DS params */ +
+			    4  /* IBSS params */ +
+			    params->ie_len);
+	if (!skb)
+		return -ENOMEM;
+
+	sdata->u.ibss.skb = skb;
+	sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
+	sdata->u.ibss.ibss_join_req = jiffies;
+
+	memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN);
+
+	/*
+	 * The ssid_len setting below is used to see whether
+	 * we are active, and we need all other settings
+	 * before that may get visible.
+	 */
+	mb();
+
+	sdata->u.ibss.ssid_len = params->ssid_len;
+
+	ieee80211_recalc_idle(sdata->local);
+
+	set_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request);
+	queue_work(sdata->local->hw.workqueue, &sdata->u.ibss.work);
+
+	return 0;
+}
+
+int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
+{
+	struct sk_buff *skb;
+
+	del_timer_sync(&sdata->u.ibss.timer);
+	clear_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request);
+	cancel_work_sync(&sdata->u.ibss.work);
+	clear_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request);
+
+	sta_info_flush(sdata->local, sdata);
+
+	/* remove beacon */
+	kfree(sdata->u.ibss.ie);
+	skb = sdata->u.ibss.presp;
+	rcu_assign_pointer(sdata->u.ibss.presp, NULL);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
+	synchronize_rcu();
+	kfree_skb(skb);
+
+	skb_queue_purge(&sdata->u.ibss.skb_queue);
+	memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
+	sdata->u.ibss.ssid_len = 0;
+
+	ieee80211_recalc_idle(sdata->local);
+
+	return 0;
+}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e6ed78cb16b..4dbc2896419 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -24,7 +24,6 @@
 #include <linux/spinlock.h>
 #include <linux/etherdevice.h>
 #include <net/cfg80211.h>
-#include <net/wireless.h>
 #include <net/iw_handler.h>
 #include <net/mac80211.h>
 #include "key.h"
@@ -236,7 +235,7 @@ struct mesh_preq_queue {
 #define IEEE80211_STA_ASSOCIATED	BIT(4)
 #define IEEE80211_STA_PROBEREQ_POLL	BIT(5)
 #define IEEE80211_STA_CREATE_IBSS	BIT(6)
-/* hole at 7, please re-use */
+#define IEEE80211_STA_CONTROL_PORT	BIT(7)
 #define IEEE80211_STA_WMM_ENABLED	BIT(8)
 /* hole at 9, please re-use */
 #define IEEE80211_STA_AUTO_SSID_SEL	BIT(10)
@@ -249,9 +248,8 @@ struct mesh_preq_queue {
 #define IEEE80211_STA_EXT_SME		BIT(17)
 /* flags for MLME request */
 #define IEEE80211_STA_REQ_SCAN 0
-#define IEEE80211_STA_REQ_DIRECT_PROBE 1
-#define IEEE80211_STA_REQ_AUTH 2
-#define IEEE80211_STA_REQ_RUN  3
+#define IEEE80211_STA_REQ_AUTH 1
+#define IEEE80211_STA_REQ_RUN  2
 
 /* bitfield of allowed auth algs */
 #define IEEE80211_AUTH_ALG_OPEN BIT(0)
@@ -295,6 +293,9 @@ struct ieee80211_if_managed {
 	int auth_tries; /* retries for auth req */
 	int assoc_tries; /* retries for assoc req */
 
+	unsigned long timers_running; /* used for quiesce/restart */
+	bool powersave; /* powersave requested for this iface */
+
 	unsigned long request;
 
 	unsigned long last_probe;
@@ -306,6 +307,8 @@ struct ieee80211_if_managed {
 	int auth_alg; /* currently used IEEE 802.11 authentication algorithm */
 	int auth_transaction;
 
+	u32 beacon_crc;
+
 	enum {
 		IEEE80211_MFP_DISABLED,
 		IEEE80211_MFP_OPTIONAL,
@@ -319,14 +322,6 @@ struct ieee80211_if_managed {
 	size_t sme_auth_ie_len;
 };
 
-enum ieee80211_ibss_flags {
-	IEEE80211_IBSS_AUTO_CHANNEL_SEL		= BIT(0),
-	IEEE80211_IBSS_AUTO_BSSID_SEL		= BIT(1),
-	IEEE80211_IBSS_BSSID_SET		= BIT(2),
-	IEEE80211_IBSS_PREV_BSSID_SET		= BIT(3),
-	IEEE80211_IBSS_SSID_SET			= BIT(4),
-};
-
 enum ieee80211_ibss_request {
 	IEEE80211_IBSS_REQ_RUN	= 0,
 };
@@ -337,17 +332,23 @@ struct ieee80211_if_ibss {
 
 	struct sk_buff_head skb_queue;
 
-	u8 ssid[IEEE80211_MAX_SSID_LEN];
-	u8 ssid_len;
+	unsigned long request;
+	unsigned long last_scan_completed;
 
-	u32 flags;
+	bool timer_running;
 
-	u8 bssid[ETH_ALEN];
+	bool fixed_bssid;
+	bool fixed_channel;
 
-	unsigned long request;
+	u8 bssid[ETH_ALEN];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len, ie_len;
+	u8 *ie;
+	struct ieee80211_channel *channel;
 
 	unsigned long ibss_join_req;
-	struct sk_buff *probe_resp; /* ProbeResp template for IBSS */
+	/* probe response/beacon for IBSS */
+	struct sk_buff *presp, *skb;
 
 	enum {
 		IEEE80211_IBSS_MLME_SEARCH,
@@ -361,6 +362,8 @@ struct ieee80211_if_mesh {
 	struct timer_list mesh_path_timer;
 	struct sk_buff_head skb_queue;
 
+	unsigned long timers_running;
+
 	bool housekeeping;
 
 	u8 mesh_id[IEEE80211_MAX_MESH_ID_LEN];
@@ -430,6 +433,12 @@ struct ieee80211_sub_if_data {
 
 	int drop_unencrypted;
 
+	/*
+	 * keep track of whether the HT opmode (stored in
+	 * vif.bss_info.ht_operation_mode) is valid.
+	 */
+	bool ht_opmode_valid;
+
 	/* Fragment table for host-based reassembly */
 	struct ieee80211_fragment_entry	fragments[IEEE80211_FRAGMENT_MAX];
 	unsigned int fragment_next;
@@ -580,6 +589,7 @@ enum queue_stop_reason {
 	IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
 	IEEE80211_QUEUE_STOP_REASON_SUSPEND,
 	IEEE80211_QUEUE_STOP_REASON_PENDING,
+	IEEE80211_QUEUE_STOP_REASON_SKB_ADD,
 };
 
 struct ieee80211_master_priv {
@@ -606,6 +616,21 @@ struct ieee80211_local {
 	unsigned int filter_flags; /* FIF_* */
 	struct iw_statistics wstats;
 	bool tim_in_locked_section; /* see ieee80211_beacon_get() */
+
+	/*
+	 * suspended is true if we finished all the suspend _and_ we have
+	 * not yet come up from resume. This is to be used by mac80211
+	 * to ensure driver sanity during suspend and mac80211's own
+	 * sanity. It can eventually be used for WoW as well.
+	 */
+	bool suspended;
+
+	/*
+	 * quiescing is true during the suspend process _only_ to
+	 * ease timer cancelling etc.
+	 */
+	bool quiescing;
+
 	int tx_headroom; /* required headroom for hardware/radiotap */
 
 	/* Tasklet and skb queue to process calls from IRQ mode. All frames
@@ -626,8 +651,6 @@ struct ieee80211_local {
 	spinlock_t sta_lock;
 	unsigned long num_sta;
 	struct list_head sta_list;
-	struct list_head sta_flush_list;
-	struct work_struct sta_flush_work;
 	struct sta_info *sta_hash[STA_HASH_SIZE];
 	struct timer_list sta_cleanup;
 
@@ -647,9 +670,6 @@ struct ieee80211_local {
 
 	struct rate_control_ref *rate_ctrl;
 
-	int rts_threshold;
-	int fragmentation_threshold;
-
 	struct crypto_blkcipher *wep_tx_tfm;
 	struct crypto_blkcipher *wep_rx_tfm;
 	u32 wep_iv;
@@ -666,15 +686,18 @@ struct ieee80211_local {
 
 
 	/* Scanning and BSS list */
+	struct mutex scan_mtx;
 	bool sw_scanning, hw_scanning;
 	struct cfg80211_ssid scan_ssid;
 	struct cfg80211_scan_request int_scan_req;
 	struct cfg80211_scan_request *scan_req;
 	struct ieee80211_channel *scan_channel;
+	const u8 *orig_ies;
+	int orig_ies_len;
 	int scan_channel_idx;
+	int scan_ies_len;
 
 	enum { SCAN_SET_CHANNEL, SCAN_SEND_PROBE } scan_state;
-	unsigned long last_scan_completed;
 	struct delayed_work scan_work;
 	struct ieee80211_sub_if_data *scan_sdata;
 	enum nl80211_channel_type oper_channel_type;
@@ -736,28 +759,32 @@ struct ieee80211_local {
 	int wifi_wme_noack_test;
 	unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
 
-	bool powersave;
 	bool pspolling;
+	/*
+	 * PS can only be enabled when we have exactly one managed
+	 * interface (and monitors) in PS, this then points there.
+	 */
+	struct ieee80211_sub_if_data *ps_sdata;
 	struct work_struct dynamic_ps_enable_work;
 	struct work_struct dynamic_ps_disable_work;
 	struct timer_list dynamic_ps_timer;
+	struct notifier_block network_latency_notifier;
 
 	int user_power_level; /* in dBm */
 	int power_constr_level; /* in dBm */
 
+	struct work_struct restart_work;
+
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct local_debugfsdentries {
 		struct dentry *rcdir;
 		struct dentry *rcname;
 		struct dentry *frequency;
-		struct dentry *rts_threshold;
-		struct dentry *fragmentation_threshold;
-		struct dentry *short_retry_limit;
-		struct dentry *long_retry_limit;
 		struct dentry *total_ps_buffered;
 		struct dentry *wep_iv;
 		struct dentry *tsf;
 		struct dentry *reset;
+		struct dentry *noack;
 		struct dentry *statistics;
 		struct local_debugfsdentries_statsdentries {
 			struct dentry *transmitted_fragment_count;
@@ -830,7 +857,7 @@ struct ieee802_11_elems {
 	u8 *fh_params;
 	u8 *ds_params;
 	u8 *cf_params;
-	u8 *tim;
+	struct ieee80211_tim_ie *tim;
 	u8 *ibss_params;
 	u8 *challenge;
 	u8 *wpa;
@@ -903,7 +930,6 @@ static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
 
 
 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed);
-int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed);
 void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx);
 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 				      u32 changed);
@@ -927,12 +953,16 @@ int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason
 int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason);
 void ieee80211_send_pspoll(struct ieee80211_local *local,
 			   struct ieee80211_sub_if_data *sdata);
+void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency);
+int ieee80211_max_network_latency(struct notifier_block *nb,
+				  unsigned long data, void *dummy);
+void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
+				      struct ieee80211_channel_sw_ie *sw_elem,
+				      struct ieee80211_bss *bss);
+void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata);
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata);
 
 /* IBSS code */
-int ieee80211_ibss_commit(struct ieee80211_sub_if_data *sdata);
-int ieee80211_ibss_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len);
-int ieee80211_ibss_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len);
-int ieee80211_ibss_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid);
 void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local);
 void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata);
 ieee80211_rx_result
@@ -940,14 +970,22 @@ ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 		       struct ieee80211_rx_status *rx_status);
 struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
 					u8 *bssid, u8 *addr, u32 supp_rates);
+int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
+			struct cfg80211_ibss_params *params);
+int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata);
+void ieee80211_ibss_quiesce(struct ieee80211_sub_if_data *sdata);
+void ieee80211_ibss_restart(struct ieee80211_sub_if_data *sdata);
 
 /* scan/BSS handling */
 void ieee80211_scan_work(struct work_struct *work);
+int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
+				    const u8 *ssid, u8 ssid_len);
 int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
 			   struct cfg80211_scan_request *req);
 int ieee80211_scan_results(struct ieee80211_local *local,
 			   struct iw_request_info *info,
 			   char *buf, size_t len);
+void ieee80211_scan_cancel(struct ieee80211_local *local);
 ieee80211_rx_result
 ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata,
 		  struct sk_buff *skb,
@@ -956,9 +994,6 @@ int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
 			       const char *ie, size_t len);
 
 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local);
-void ieee80211_scan_failed(struct ieee80211_local *local);
-int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata,
-			 struct cfg80211_scan_request *req);
 struct ieee80211_bss *
 ieee80211_bss_info_update(struct ieee80211_local *local,
 			  struct ieee80211_rx_status *rx_status,
@@ -983,6 +1018,8 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 			     enum nl80211_iftype type);
 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
 void ieee80211_remove_interfaces(struct ieee80211_local *local);
+u32 __ieee80211_recalc_idle(struct ieee80211_local *local);
+void ieee80211_recalc_idle(struct ieee80211_local *local);
 
 /* tx handling */
 void ieee80211_clear_tx_pending(struct ieee80211_local *local);
@@ -995,9 +1032,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev);
 void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
 				       struct ieee80211_ht_cap *ht_cap_ie,
 				       struct ieee80211_sta_ht_cap *ht_cap);
-u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
-			struct ieee80211_ht_info *hti,
-			u16 ap_ht_cap_flags);
 void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn);
 void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
 			  const u8 *da, u16 tid,
@@ -1027,24 +1061,23 @@ int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
 				       struct ieee80211_mgmt *mgmt,
 				       size_t len);
-void ieee80211_chswitch_timer(unsigned long data);
-void ieee80211_chswitch_work(struct work_struct *work);
-void ieee80211_process_chanswitch(struct ieee80211_sub_if_data *sdata,
-				  struct ieee80211_channel_sw_ie *sw_elem,
-				  struct ieee80211_bss *bss);
-void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
-				 u16 capab_info, u8 *pwr_constr_elem,
-				 u8 pwr_constr_elem_len);
-
-/* Suspend/resume */
+
+/* Suspend/resume and hw reconfiguration */
+int ieee80211_reconfig(struct ieee80211_local *local);
+
 #ifdef CONFIG_PM
 int __ieee80211_suspend(struct ieee80211_hw *hw);
-int __ieee80211_resume(struct ieee80211_hw *hw);
+
+static inline int __ieee80211_resume(struct ieee80211_hw *hw)
+{
+	return ieee80211_reconfig(hw_to_local(hw));
+}
 #else
 static inline int __ieee80211_suspend(struct ieee80211_hw *hw)
 {
 	return 0;
 }
+
 static inline int __ieee80211_resume(struct ieee80211_hw *hw)
 {
 	return 0;
@@ -1053,19 +1086,20 @@ static inline int __ieee80211_resume(struct ieee80211_hw *hw)
 
 /* utility functions/constants */
 extern void *mac80211_wiphy_privid; /* for wiphy privid */
-extern const unsigned char rfc1042_header[6];
-extern const unsigned char bridge_tunnel_header[6];
 u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
 			enum nl80211_iftype type);
 int ieee80211_frame_duration(struct ieee80211_local *local, size_t len,
 			     int rate, int erp, int short_preamble);
 void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
-				     struct ieee80211_hdr *hdr);
+				     struct ieee80211_hdr *hdr, const u8 *tsc);
 void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata);
 void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 		      int encrypt);
 void ieee802_11_parse_elems(u8 *start, size_t len,
 			    struct ieee802_11_elems *elems);
+u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
+			       struct ieee802_11_elems *elems,
+			       u64 filter, u32 crc);
 int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
 u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
 			      enum ieee80211_band band);
@@ -1088,14 +1122,20 @@ void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
 				    enum queue_stop_reason reason);
 void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue,
 				    enum queue_stop_reason reason);
+void ieee80211_add_pending_skb(struct ieee80211_local *local,
+			       struct sk_buff *skb);
+int ieee80211_add_pending_skbs(struct ieee80211_local *local,
+			       struct sk_buff_head *skbs);
 
 void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
 			 u16 transaction, u16 auth_alg,
 			 u8 *extra, size_t extra_len,
 			 const u8 *bssid, int encrypt);
+int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
+			     const u8 *ie, size_t ie_len);
 void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
-			      u8 *ssid, size_t ssid_len,
-			      u8 *ie, size_t ie_len);
+			      const u8 *ssid, size_t ssid_len,
+			      const u8 *ie, size_t ie_len);
 
 void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
 				  const size_t supp_rates_len,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 91e8e1bacaa..b7c8a448429 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -20,6 +20,7 @@
 #include "debugfs_netdev.h"
 #include "mesh.h"
 #include "led.h"
+#include "driver-ops.h"
 
 /**
  * DOC: Interface list locking
@@ -164,14 +165,12 @@ static int ieee80211_open(struct net_device *dev)
 	}
 
 	if (local->open_count == 0) {
-		res = 0;
-		if (local->ops->start)
-			res = local->ops->start(local_to_hw(local));
+		res = drv_start(local);
 		if (res)
 			goto err_del_bss;
 		/* we're brought up, everything changes */
 		hw_reconf_flags = ~0;
-		ieee80211_led_radio(local, local->hw.conf.radio_enabled);
+		ieee80211_led_radio(local, true);
 	}
 
 	/*
@@ -199,8 +198,8 @@ static int ieee80211_open(struct net_device *dev)
 	 * Validate the MAC address for this device.
 	 */
 	if (!is_valid_ether_addr(dev->dev_addr)) {
-		if (!local->open_count && local->ops->stop)
-			local->ops->stop(local_to_hw(local));
+		if (!local->open_count)
+			drv_stop(local);
 		return -EADDRNOTAVAIL;
 	}
 
@@ -235,17 +234,13 @@ static int ieee80211_open(struct net_device *dev)
 		netif_addr_unlock_bh(local->mdev);
 		break;
 	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_ADHOC:
-		if (sdata->vif.type == NL80211_IFTYPE_STATION)
-			sdata->u.mgd.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
-		else
-			sdata->u.ibss.flags &= ~IEEE80211_IBSS_PREV_BSSID_SET;
+		sdata->u.mgd.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
 		/* fall through */
 	default:
 		conf.vif = &sdata->vif;
 		conf.type = sdata->vif.type;
 		conf.mac_addr = dev->dev_addr;
-		res = local->ops->add_interface(local_to_hw(local), &conf);
+		res = drv_add_interface(local, &conf);
 		if (res)
 			goto err_stop;
 
@@ -306,6 +301,8 @@ static int ieee80211_open(struct net_device *dev)
 	if (sdata->flags & IEEE80211_SDATA_PROMISC)
 		atomic_inc(&local->iff_promiscs);
 
+	hw_reconf_flags |= __ieee80211_recalc_idle(local);
+
 	local->open_count++;
 	if (hw_reconf_flags) {
 		ieee80211_hw_config(local, hw_reconf_flags);
@@ -317,6 +314,8 @@ static int ieee80211_open(struct net_device *dev)
 		ieee80211_set_wmm_default(sdata);
 	}
 
+	ieee80211_recalc_ps(local, -1);
+
 	/*
 	 * ieee80211_sta_work is disabled while network interface
 	 * is down. Therefore, some configuration changes may not
@@ -325,17 +324,15 @@ static int ieee80211_open(struct net_device *dev)
 	 */
 	if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		queue_work(local->hw.workqueue, &sdata->u.mgd.work);
-	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-		queue_work(local->hw.workqueue, &sdata->u.ibss.work);
 
 	netif_tx_start_all_queues(dev);
 
 	return 0;
  err_del_interface:
-	local->ops->remove_interface(local_to_hw(local), &conf);
+	drv_remove_interface(local, &conf);
  err_stop:
-	if (!local->open_count && local->ops->stop)
-		local->ops->stop(local_to_hw(local));
+	if (!local->open_count)
+		drv_stop(local);
  err_del_bss:
 	sdata->bss = NULL;
 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
@@ -497,7 +494,6 @@ static int ieee80211_stop(struct net_device *dev)
 		/* fall through */
 	case NL80211_IFTYPE_ADHOC:
 		if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-			memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
 			del_timer_sync(&sdata->u.ibss.timer);
 			cancel_work_sync(&sdata->u.ibss.work);
 			synchronize_rcu();
@@ -549,19 +545,22 @@ static int ieee80211_stop(struct net_device *dev)
 		conf.mac_addr = dev->dev_addr;
 		/* disable all keys for as long as this netdev is down */
 		ieee80211_disable_keys(sdata);
-		local->ops->remove_interface(local_to_hw(local), &conf);
+		drv_remove_interface(local, &conf);
 	}
 
 	sdata->bss = NULL;
 
+	hw_reconf_flags |= __ieee80211_recalc_idle(local);
+
+	ieee80211_recalc_ps(local, -1);
+
 	if (local->open_count == 0) {
 		if (netif_running(local->mdev))
 			dev_close(local->mdev);
 
-		if (local->ops->stop)
-			local->ops->stop(local_to_hw(local));
+		drv_stop(local);
 
-		ieee80211_led_radio(local, 0);
+		ieee80211_led_radio(local, false);
 
 		flush_workqueue(local->hw.workqueue);
 
@@ -649,7 +648,8 @@ static void ieee80211_teardown_sdata(struct net_device *dev)
 			mesh_rmc_free(sdata);
 		break;
 	case NL80211_IFTYPE_ADHOC:
-		kfree_skb(sdata->u.ibss.probe_resp);
+		if (WARN_ON(sdata->u.ibss.presp))
+			kfree_skb(sdata->u.ibss.presp);
 		break;
 	case NL80211_IFTYPE_STATION:
 		kfree(sdata->u.mgd.extra_ie);
@@ -896,3 +896,74 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
 		unregister_netdevice(sdata->dev);
 	}
 }
+
+static u32 ieee80211_idle_off(struct ieee80211_local *local,
+			      const char *reason)
+{
+	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
+		return 0;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	printk(KERN_DEBUG "%s: device no longer idle - %s\n",
+	       wiphy_name(local->hw.wiphy), reason);
+#endif
+
+	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+static u32 ieee80211_idle_on(struct ieee80211_local *local)
+{
+	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
+		return 0;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	printk(KERN_DEBUG "%s: device now idle\n",
+	       wiphy_name(local->hw.wiphy));
+#endif
+
+	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata;
+	int count = 0;
+
+	if (local->hw_scanning || local->sw_scanning)
+		return ieee80211_idle_off(local, "scanning");
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+		/* do not count disabled managed interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+		    sdata->u.mgd.state == IEEE80211_STA_MLME_DISABLED)
+			continue;
+		/* do not count unused IBSS interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+		    !sdata->u.ibss.ssid_len)
+			continue;
+		/* count everything else */
+		count++;
+	}
+
+	if (!count)
+		return ieee80211_idle_on(local);
+	else
+		return ieee80211_idle_off(local, "in use");
+
+	return 0;
+}
+
+void ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	u32 chg;
+
+	mutex_lock(&local->iflist_mtx);
+	chg = __ieee80211_recalc_idle(local);
+	mutex_unlock(&local->iflist_mtx);
+	if (chg)
+		ieee80211_hw_config(local, chg);
+}
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 687acf23054..ce267565e18 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -16,6 +16,7 @@
 #include <linux/rtnetlink.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "debugfs_key.h"
 #include "aes_ccm.h"
 #include "aes_cmac.h"
@@ -136,8 +137,7 @@ static void ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
 				     struct ieee80211_sub_if_data,
 				     u.ap);
 
-	ret = key->local->ops->set_key(local_to_hw(key->local), SET_KEY,
-				       &sdata->vif, sta, &key->conf);
+	ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf);
 
 	if (!ret) {
 		spin_lock(&todo_lock);
@@ -179,8 +179,8 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
 				     struct ieee80211_sub_if_data,
 				     u.ap);
 
-	ret = key->local->ops->set_key(local_to_hw(key->local), DISABLE_KEY,
-				       &sdata->vif, sta, &key->conf);
+	ret = drv_set_key(key->local, DISABLE_KEY, &sdata->vif,
+			  sta, &key->conf);
 
 	if (ret)
 		printk(KERN_ERR "mac80211-%s: failed to remove key "
@@ -290,9 +290,11 @@ static void __ieee80211_key_replace(struct ieee80211_sub_if_data *sdata,
 struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
 					  int idx,
 					  size_t key_len,
-					  const u8 *key_data)
+					  const u8 *key_data,
+					  size_t seq_len, const u8 *seq)
 {
 	struct ieee80211_key *key;
+	int i, j;
 
 	BUG_ON(idx < 0 || idx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS);
 
@@ -318,14 +320,31 @@ struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
 	case ALG_TKIP:
 		key->conf.iv_len = TKIP_IV_LEN;
 		key->conf.icv_len = TKIP_ICV_LEN;
+		if (seq) {
+			for (i = 0; i < NUM_RX_DATA_QUEUES; i++) {
+				key->u.tkip.rx[i].iv32 =
+					get_unaligned_le32(&seq[2]);
+				key->u.tkip.rx[i].iv16 =
+					get_unaligned_le16(seq);
+			}
+		}
 		break;
 	case ALG_CCMP:
 		key->conf.iv_len = CCMP_HDR_LEN;
 		key->conf.icv_len = CCMP_MIC_LEN;
+		if (seq) {
+			for (i = 0; i < NUM_RX_DATA_QUEUES; i++)
+				for (j = 0; j < CCMP_PN_LEN; j++)
+					key->u.ccmp.rx_pn[i][j] =
+						seq[CCMP_PN_LEN - j - 1];
+		}
 		break;
 	case ALG_AES_CMAC:
 		key->conf.iv_len = 0;
 		key->conf.icv_len = sizeof(struct ieee80211_mmie);
+		if (seq)
+			for (j = 0; j < 6; j++)
+				key->u.aes_cmac.rx_pn[j] = seq[6 - j - 1];
 		break;
 	}
 	memcpy(key->conf.key, key_data, key_len);
diff --git a/net/mac80211/key.h b/net/mac80211/key.h
index 215d3ef42a4..9572e00f532 100644
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -144,7 +144,8 @@ struct ieee80211_key {
 struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
 					  int idx,
 					  size_t key_len,
-					  const u8 *key_data);
+					  const u8 *key_data,
+					  size_t seq_len, const u8 *seq);
 /*
  * Insert a key into data structures (sdata, sta if necessary)
  * to make it used, free old key.
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 14134193cd1..092a017b237 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -21,10 +21,12 @@
 #include <linux/wireless.h>
 #include <linux/rtnetlink.h>
 #include <linux/bitmap.h>
+#include <linux/pm_qos_params.h>
 #include <net/net_namespace.h>
 #include <net/cfg80211.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "mesh.h"
 #include "wep.h"
@@ -80,10 +82,9 @@ void ieee80211_configure_filter(struct ieee80211_local *local)
 	/* be a bit nasty */
 	new_flags |= (1<<31);
 
-	local->ops->configure_filter(local_to_hw(local),
-				     changed_flags, &new_flags,
-				     local->mdev->mc_count,
-				     local->mdev->mc_list);
+	drv_configure_filter(local, changed_flags, &new_flags,
+			     local->mdev->mc_count,
+			     local->mdev->mc_list);
 
 	WARN_ON(new_flags & (1<<31));
 
@@ -151,93 +152,19 @@ static void ieee80211_master_set_multicast_list(struct net_device *dev)
 	ieee80211_configure_filter(local);
 }
 
-/* everything else */
-
-int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_if_conf conf;
-
-	if (WARN_ON(!netif_running(sdata->dev)))
-		return 0;
-
-	memset(&conf, 0, sizeof(conf));
-
-	if (sdata->vif.type == NL80211_IFTYPE_STATION)
-		conf.bssid = sdata->u.mgd.bssid;
-	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-		conf.bssid = sdata->u.ibss.bssid;
-	else if (sdata->vif.type == NL80211_IFTYPE_AP)
-		conf.bssid = sdata->dev->dev_addr;
-	else if (ieee80211_vif_is_mesh(&sdata->vif)) {
-		static const u8 zero[ETH_ALEN] = { 0 };
-		conf.bssid = zero;
-	} else {
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	if (!local->ops->config_interface)
-		return 0;
-
-	switch (sdata->vif.type) {
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_ADHOC:
-	case NL80211_IFTYPE_MESH_POINT:
-		break;
-	default:
-		/* do not warn to simplify caller in scan.c */
-		changed &= ~IEEE80211_IFCC_BEACON_ENABLED;
-		if (WARN_ON(changed & IEEE80211_IFCC_BEACON))
-			return -EINVAL;
-		changed &= ~IEEE80211_IFCC_BEACON;
-		break;
-	}
-
-	if (changed & IEEE80211_IFCC_BEACON_ENABLED) {
-		if (local->sw_scanning) {
-			conf.enable_beacon = false;
-		} else {
-			/*
-			 * Beacon should be enabled, but AP mode must
-			 * check whether there is a beacon configured.
-			 */
-			switch (sdata->vif.type) {
-			case NL80211_IFTYPE_AP:
-				conf.enable_beacon =
-					!!rcu_dereference(sdata->u.ap.beacon);
-				break;
-			case NL80211_IFTYPE_ADHOC:
-				conf.enable_beacon = !!sdata->u.ibss.probe_resp;
-				break;
-			case NL80211_IFTYPE_MESH_POINT:
-				conf.enable_beacon = true;
-				break;
-			default:
-				/* not reached */
-				WARN_ON(1);
-				break;
-			}
-		}
-	}
-
-	conf.changed = changed;
-
-	return local->ops->config_interface(local_to_hw(local),
-					    &sdata->vif, &conf);
-}
-
 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 {
-	struct ieee80211_channel *chan;
+	struct ieee80211_channel *chan, *scan_chan;
 	int ret = 0;
 	int power;
 	enum nl80211_channel_type channel_type;
 
 	might_sleep();
 
-	if (local->sw_scanning) {
-		chan = local->scan_channel;
+	scan_chan = local->scan_channel;
+
+	if (scan_chan) {
+		chan = scan_chan;
 		channel_type = NL80211_CHAN_NO_HT;
 	} else {
 		chan = local->oper_channel;
@@ -251,7 +178,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 		changed |= IEEE80211_CONF_CHANGE_CHANNEL;
 	}
 
-	if (local->sw_scanning)
+	if (scan_chan)
 		power = chan->max_power;
 	else
 		power = local->power_constr_level ?
@@ -267,7 +194,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 	}
 
 	if (changed && local->open_count) {
-		ret = local->ops->config(local_to_hw(local), changed);
+		ret = drv_config(local, changed);
 		/*
 		 * Goal:
 		 * HW reconfiguration should never fail, the driver has told
@@ -292,18 +219,78 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 				      u32 changed)
 {
 	struct ieee80211_local *local = sdata->local;
+	static const u8 zero[ETH_ALEN] = { 0 };
 
-	if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
+	if (!changed)
 		return;
 
-	if (!changed)
+	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+		/*
+		 * While not associated, claim a BSSID of all-zeroes
+		 * so that drivers don't do any weird things with the
+		 * BSSID at that time.
+		 */
+		if (sdata->vif.bss_conf.assoc)
+			sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
+		else
+			sdata->vif.bss_conf.bssid = zero;
+	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
+	else if (sdata->vif.type == NL80211_IFTYPE_AP)
+		sdata->vif.bss_conf.bssid = sdata->dev->dev_addr;
+	else if (ieee80211_vif_is_mesh(&sdata->vif)) {
+		sdata->vif.bss_conf.bssid = zero;
+	} else {
+		WARN_ON(1);
 		return;
+	}
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MESH_POINT:
+		break;
+	default:
+		/* do not warn to simplify caller in scan.c */
+		changed &= ~BSS_CHANGED_BEACON_ENABLED;
+		if (WARN_ON(changed & BSS_CHANGED_BEACON))
+			return;
+		break;
+	}
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED) {
+		if (local->sw_scanning) {
+			sdata->vif.bss_conf.enable_beacon = false;
+		} else {
+			/*
+			 * Beacon should be enabled, but AP mode must
+			 * check whether there is a beacon configured.
+			 */
+			switch (sdata->vif.type) {
+			case NL80211_IFTYPE_AP:
+				sdata->vif.bss_conf.enable_beacon =
+					!!rcu_dereference(sdata->u.ap.beacon);
+				break;
+			case NL80211_IFTYPE_ADHOC:
+				sdata->vif.bss_conf.enable_beacon =
+					!!rcu_dereference(sdata->u.ibss.presp);
+				break;
+			case NL80211_IFTYPE_MESH_POINT:
+				sdata->vif.bss_conf.enable_beacon = true;
+				break;
+			default:
+				/* not reached */
+				WARN_ON(1);
+				break;
+			}
+		}
+	}
+
+	drv_bss_info_changed(local, &sdata->vif,
+			     &sdata->vif.bss_conf, changed);
 
-	if (local->ops->bss_info_changed)
-		local->ops->bss_info_changed(local_to_hw(local),
-					     &sdata->vif,
-					     &sdata->vif.bss_conf,
-					     changed);
+	/* DEPRECATED */
+	local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int;
 }
 
 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
@@ -382,60 +369,12 @@ static void ieee80211_tasklet_handler(unsigned long data)
 	}
 }
 
-/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
- * make a prepared TX frame (one that has been given to hw) to look like brand
- * new IEEE 802.11 frame that is ready to go through TX processing again.
- */
-static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
-				      struct ieee80211_key *key,
-				      struct sk_buff *skb)
-{
-	unsigned int hdrlen, iv_len, mic_len;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-
-	hdrlen = ieee80211_hdrlen(hdr->frame_control);
-
-	if (!key)
-		goto no_key;
-
-	switch (key->conf.alg) {
-	case ALG_WEP:
-		iv_len = WEP_IV_LEN;
-		mic_len = WEP_ICV_LEN;
-		break;
-	case ALG_TKIP:
-		iv_len = TKIP_IV_LEN;
-		mic_len = TKIP_ICV_LEN;
-		break;
-	case ALG_CCMP:
-		iv_len = CCMP_HDR_LEN;
-		mic_len = CCMP_MIC_LEN;
-		break;
-	default:
-		goto no_key;
-	}
-
-	if (skb->len >= hdrlen + mic_len &&
-	    !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
-		skb_trim(skb, skb->len - mic_len);
-	if (skb->len >= hdrlen + iv_len) {
-		memmove(skb->data + iv_len, skb->data, hdrlen);
-		hdr = (struct ieee80211_hdr *)skb_pull(skb, iv_len);
-	}
-
-no_key:
-	if (ieee80211_is_data_qos(hdr->frame_control)) {
-		hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
-		memmove(skb->data + IEEE80211_QOS_CTL_LEN, skb->data,
-			hdrlen - IEEE80211_QOS_CTL_LEN);
-		skb_pull(skb, IEEE80211_QOS_CTL_LEN);
-	}
-}
-
 static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
 					    struct sta_info *sta,
 					    struct sk_buff *skb)
 {
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
 	sta->tx_filtered_count++;
 
 	/*
@@ -477,16 +416,15 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
 	 */
 	if (test_sta_flags(sta, WLAN_STA_PS) &&
 	    skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
-		ieee80211_remove_tx_extra(local, sta->key, skb);
 		skb_queue_tail(&sta->tx_filtered, skb);
 		return;
 	}
 
-	if (!test_sta_flags(sta, WLAN_STA_PS) && !skb->requeue) {
+	if (!test_sta_flags(sta, WLAN_STA_PS) &&
+	    !(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
 		/* Software retry the packet once */
-		skb->requeue = 1;
-		ieee80211_remove_tx_extra(local, sta->key, skb);
-		dev_queue_xmit(skb);
+		info->flags |= IEEE80211_TX_INTFL_RETRIED;
+		ieee80211_add_pending_skb(local, skb);
 		return;
 	}
 
@@ -696,6 +634,28 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(ieee80211_tx_status);
 
+static void ieee80211_restart_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local, restart_work);
+
+	rtnl_lock();
+	ieee80211_reconfig(local);
+	rtnl_unlock();
+}
+
+void ieee80211_restart_hw(struct ieee80211_hw *hw)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+
+	/* use this reason, __ieee80211_resume will unblock it */
+	ieee80211_stop_queues_by_reason(hw,
+		IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+
+	schedule_work(&local->restart_work);
+}
+EXPORT_SYMBOL(ieee80211_restart_hw);
+
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 					const struct ieee80211_ops *ops)
 {
@@ -718,9 +678,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	 * +-------------------------+
 	 *
 	 */
-	priv_size = ((sizeof(struct ieee80211_local) +
-		      NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
-		    priv_data_len;
+	priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
 
 	wiphy = wiphy_new(&mac80211_config_ops, priv_size);
 
@@ -728,17 +686,16 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 		return NULL;
 
 	wiphy->privid = mac80211_wiphy_privid;
-	wiphy->max_scan_ssids = 4;
+
 	/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
 	wiphy->bss_priv_size = sizeof(struct ieee80211_bss) -
 			       sizeof(struct cfg80211_bss);
 
 	local = wiphy_priv(wiphy);
+
 	local->hw.wiphy = wiphy;
 
-	local->hw.priv = (char *)local +
-			 ((sizeof(struct ieee80211_local) +
-			   NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
+	local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
 
 	BUG_ON(!ops->tx);
 	BUG_ON(!ops->start);
@@ -752,15 +709,14 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	/* set up some defaults */
 	local->hw.queues = 1;
 	local->hw.max_rates = 1;
-	local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
-	local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
-	local->hw.conf.long_frame_max_tx_count = 4;
-	local->hw.conf.short_frame_max_tx_count = 7;
+	local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
+	local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
 	local->hw.conf.radio_enabled = true;
 	local->user_power_level = -1;
 
 	INIT_LIST_HEAD(&local->interfaces);
 	mutex_init(&local->iflist_mtx);
+	mutex_init(&local->scan_mtx);
 
 	spin_lock_init(&local->key_lock);
 
@@ -768,6 +724,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 
 	INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
 
+	INIT_WORK(&local->restart_work, ieee80211_restart_work);
+
 	INIT_WORK(&local->dynamic_ps_enable_work,
 		  ieee80211_dynamic_ps_enable_work);
 	INIT_WORK(&local->dynamic_ps_disable_work,
@@ -821,7 +779,17 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	enum ieee80211_band band;
 	struct net_device *mdev;
 	struct ieee80211_master_priv *mpriv;
-	int channels, i, j;
+	int channels, i, j, max_bitrates;
+	bool supp_ht;
+	static const u32 cipher_suites[] = {
+		WLAN_CIPHER_SUITE_WEP40,
+		WLAN_CIPHER_SUITE_WEP104,
+		WLAN_CIPHER_SUITE_TKIP,
+		WLAN_CIPHER_SUITE_CCMP,
+
+		/* keep last -- depends on hw flags! */
+		WLAN_CIPHER_SUITE_AES_CMAC
+	};
 
 	/*
 	 * generic code guarantees at least one band,
@@ -829,18 +797,25 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	 * that hw.conf.channel is assigned
 	 */
 	channels = 0;
+	max_bitrates = 0;
+	supp_ht = false;
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		struct ieee80211_supported_band *sband;
 
 		sband = local->hw.wiphy->bands[band];
-		if (sband && !local->oper_channel) {
+		if (!sband)
+			continue;
+		if (!local->oper_channel) {
 			/* init channel we're on */
 			local->hw.conf.channel =
-			local->oper_channel =
-			local->scan_channel = &sband->channels[0];
+			local->oper_channel = &sband->channels[0];
+			local->hw.conf.channel_type = NL80211_CHAN_NO_HT;
 		}
-		if (sband)
-			channels += sband->n_channels;
+		channels += sband->n_channels;
+
+		if (max_bitrates < sband->n_bitrates)
+			max_bitrates = sband->n_bitrates;
+		supp_ht = supp_ht || sband->ht_cap.ht_supported;
 	}
 
 	local->int_scan_req.n_channels = channels;
@@ -860,6 +835,37 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
 		local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
 
+	/*
+	 * Calculate scan IE length -- we need this to alloc
+	 * memory and to subtract from the driver limit. It
+	 * includes the (extended) supported rates and HT
+	 * information -- SSID is the driver's responsibility.
+	 */
+	local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
+	if (supp_ht)
+		local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
+
+	if (!local->ops->hw_scan) {
+		/* For hw_scan, driver needs to set these up. */
+		local->hw.wiphy->max_scan_ssids = 4;
+		local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+	}
+
+	/*
+	 * If the driver supports any scan IEs, then assume the
+	 * limit includes the IEs mac80211 will add, otherwise
+	 * leave it at zero and let the driver sort it out; we
+	 * still pass our IEs to the driver but userspace will
+	 * not be allowed to in that case.
+	 */
+	if (local->hw.wiphy->max_scan_ie_len)
+		local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
+
+	local->hw.wiphy->cipher_suites = cipher_suites;
+	local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+	if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
+		local->hw.wiphy->n_cipher_suites--;
+
 	result = wiphy_register(local->hw.wiphy);
 	if (result < 0)
 		goto fail_wiphy_register;
@@ -898,9 +904,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 
 	debugfs_hw_add(local);
 
-	if (local->hw.conf.beacon_int < 10)
-		local->hw.conf.beacon_int = 100;
-
 	if (local->hw.max_listen_interval == 0)
 		local->hw.max_listen_interval = 1;
 
@@ -965,25 +968,38 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		}
 	}
 
+	local->network_latency_notifier.notifier_call =
+		ieee80211_max_network_latency;
+	result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
+				     &local->network_latency_notifier);
+
+	if (result) {
+		rtnl_lock();
+		goto fail_pm_qos;
+	}
+
 	return 0;
 
-fail_rate:
+ fail_pm_qos:
+	ieee80211_led_exit(local);
+	ieee80211_remove_interfaces(local);
+ fail_rate:
 	unregister_netdevice(local->mdev);
 	local->mdev = NULL;
-fail_dev:
+ fail_dev:
 	rtnl_unlock();
 	ieee80211_wep_free(local);
-fail_wep:
+ fail_wep:
 	sta_info_stop(local);
-fail_sta_info:
+ fail_sta_info:
 	debugfs_hw_del(local);
 	destroy_workqueue(local->hw.workqueue);
-fail_workqueue:
+ fail_workqueue:
 	if (local->mdev)
 		free_netdev(local->mdev);
-fail_mdev_alloc:
+ fail_mdev_alloc:
 	wiphy_unregister(local->hw.wiphy);
-fail_wiphy_register:
+ fail_wiphy_register:
 	kfree(local->int_scan_req.channels);
 	return result;
 }
@@ -996,6 +1012,9 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 	tasklet_kill(&local->tx_pending_tasklet);
 	tasklet_kill(&local->tasklet);
 
+	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
+			       &local->network_latency_notifier);
+
 	rtnl_lock();
 
 	/*
@@ -1038,6 +1057,7 @@ void ieee80211_free_hw(struct ieee80211_hw *hw)
 	struct ieee80211_local *local = hw_to_local(hw);
 
 	mutex_destroy(&local->iflist_mtx);
+	mutex_destroy(&local->scan_mtx);
 
 	wiphy_free(local->hw.wiphy);
 }
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 9a3e5de0410..fc712e60705 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -21,6 +21,9 @@
 #define CAPAB_OFFSET 17
 #define ACCEPT_PLINKS 0x80
 
+#define TMR_RUNNING_HK	0
+#define TMR_RUNNING_MP	1
+
 int mesh_allocated;
 static struct kmem_cache *rm_cache;
 
@@ -45,6 +48,12 @@ static void ieee80211_mesh_housekeeping_timer(unsigned long data)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 
 	ifmsh->housekeeping = true;
+
+	if (local->quiescing) {
+		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
+		return;
+	}
+
 	queue_work(local->hw.workqueue, &ifmsh->work);
 }
 
@@ -343,6 +352,11 @@ static void ieee80211_mesh_path_timer(unsigned long data)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct ieee80211_local *local = sdata->local;
 
+	if (local->quiescing) {
+		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
+		return;
+	}
+
 	queue_work(local->hw.workqueue, &ifmsh->work);
 }
 
@@ -417,13 +431,39 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
 
 	free_plinks = mesh_plink_availables(sdata);
 	if (free_plinks != sdata->u.mesh.accepting_plinks)
-		ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
 
 	ifmsh->housekeeping = false;
 	mod_timer(&ifmsh->housekeeping_timer,
 		  round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
 }
 
+#ifdef CONFIG_PM
+void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	/* might restart the timer but that doesn't matter */
+	cancel_work_sync(&ifmsh->work);
+
+	/* use atomic bitops in case both timers fire at the same time */
+
+	if (del_timer_sync(&ifmsh->housekeeping_timer))
+		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
+	if (del_timer_sync(&ifmsh->mesh_path_timer))
+		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
+}
+
+void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running))
+		add_timer(&ifmsh->housekeeping_timer);
+	if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
+		add_timer(&ifmsh->mesh_path_timer);
+}
+#endif
 
 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 {
@@ -432,8 +472,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 
 	ifmsh->housekeeping = true;
 	queue_work(local->hw.workqueue, &ifmsh->work);
-	ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
-				   IEEE80211_IFCC_BEACON_ENABLED);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
+						BSS_CHANGED_BEACON_ENABLED);
 }
 
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index d891d7ddccd..c7d72819cdd 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -191,12 +191,8 @@ struct mesh_rmc {
 #define PLINK_CATEGORY		30
 #define MESH_PATH_SEL_CATEGORY	32
 
-/* Mesh Header Flags */
-#define IEEE80211S_FLAGS_AE	0x3
-
 /* Public interfaces */
 /* Various */
-int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
 		struct ieee80211_sub_if_data *sdata);
 int mesh_rmc_check(u8 *addr, struct ieee80211s_hdr *mesh_hdr,
@@ -267,6 +263,8 @@ void mesh_path_timer(unsigned long data);
 void mesh_path_flush_by_nexthop(struct sta_info *sta);
 void mesh_path_discard_frame(struct sk_buff *skb,
 		struct ieee80211_sub_if_data *sdata);
+void mesh_path_quiesce(struct ieee80211_sub_if_data *sdata);
+void mesh_path_restart(struct ieee80211_sub_if_data *sdata);
 
 #ifdef CONFIG_MAC80211_MESH
 extern int mesh_allocated;
@@ -294,10 +292,20 @@ static inline void mesh_path_activate(struct mesh_path *mpath)
 
 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local);
 
+void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata);
+void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata);
+void mesh_plink_quiesce(struct sta_info *sta);
+void mesh_plink_restart(struct sta_info *sta);
 #else
 #define mesh_allocated	0
 static inline void
 ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) {}
+static inline void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
+{}
+static inline void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
+{}
+static inline void mesh_plink_quiesce(struct sta_info *sta) {}
+static inline void mesh_plink_restart(struct sta_info *sta) {}
 #endif
 
 #endif /* IEEE80211S_H */
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 60b35accda9..003cb470ac8 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -836,8 +836,14 @@ void mesh_path_timer(unsigned long data)
 	mpath = rcu_dereference(mpath);
 	if (!mpath)
 		goto endmpathtimer;
-	spin_lock_bh(&mpath->state_lock);
 	sdata = mpath->sdata;
+
+	if (sdata->local->quiescing) {
+		rcu_read_unlock();
+		return;
+	}
+
+	spin_lock_bh(&mpath->state_lock);
 	if (mpath->flags & MESH_PATH_RESOLVED ||
 			(!(mpath->flags & MESH_PATH_RESOLVING)))
 		mpath->flags &= ~(MESH_PATH_RESOLVING | MESH_PATH_RESOLVED);
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index a8bbdeca013..cb14253587f 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -266,6 +266,11 @@ static void mesh_plink_timer(unsigned long data)
 	 */
 	sta = (struct sta_info *) data;
 
+	if (sta->sdata->local->quiescing) {
+		sta->plink_timer_was_running = true;
+		return;
+	}
+
 	spin_lock_bh(&sta->lock);
 	if (sta->ignore_plink_timer) {
 		sta->ignore_plink_timer = false;
@@ -322,6 +327,22 @@ static void mesh_plink_timer(unsigned long data)
 	}
 }
 
+#ifdef CONFIG_PM
+void mesh_plink_quiesce(struct sta_info *sta)
+{
+	if (del_timer_sync(&sta->plink_timer))
+		sta->plink_timer_was_running = true;
+}
+
+void mesh_plink_restart(struct sta_info *sta)
+{
+	if (sta->plink_timer_was_running) {
+		add_timer(&sta->plink_timer);
+		sta->plink_timer_was_running = false;
+	}
+}
+#endif
+
 static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout)
 {
 	sta->plink_timer.expires = jiffies + (HZ * timeout / 1000);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 132938b073d..d779c57a822 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -17,10 +17,13 @@
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
+#include <linux/pm_qos_params.h>
+#include <linux/crc32.h>
 #include <net/mac80211.h>
 #include <asm/unaligned.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "led.h"
 
@@ -30,9 +33,13 @@
 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
 #define IEEE80211_ASSOC_MAX_TRIES 3
 #define IEEE80211_MONITORING_INTERVAL (2 * HZ)
+#define IEEE80211_PROBE_WAIT (HZ / 5)
 #define IEEE80211_PROBE_IDLE_TIME (60 * HZ)
 #define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ)
 
+#define TMR_RUNNING_TIMER	0
+#define TMR_RUNNING_CHANSW	1
+
 /* utils */
 static int ecw2cw(int ecw)
 {
@@ -80,6 +87,92 @@ static int ieee80211_compatible_rates(struct ieee80211_bss *bss,
 	return count;
 }
 
+/*
+ * ieee80211_enable_ht should be called only after the operating band
+ * has been determined as ht configuration depends on the hw's
+ * HT abilities for a specific band.
+ */
+static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
+			       struct ieee80211_ht_info *hti,
+			       u16 ap_ht_cap_flags)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct sta_info *sta;
+	u32 changed = 0;
+	u16 ht_opmode;
+	bool enable_ht = true, ht_changed;
+	enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+	/* HT is not supported */
+	if (!sband->ht_cap.ht_supported)
+		enable_ht = false;
+
+	/* check that channel matches the right operating channel */
+	if (local->hw.conf.channel->center_freq !=
+	    ieee80211_channel_to_frequency(hti->control_chan))
+		enable_ht = false;
+
+	if (enable_ht) {
+		channel_type = NL80211_CHAN_HT20;
+
+		if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+		    (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
+		    (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
+			switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				if (!(local->hw.conf.channel->flags &
+				    IEEE80211_CHAN_NO_HT40PLUS))
+					channel_type = NL80211_CHAN_HT40PLUS;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				if (!(local->hw.conf.channel->flags &
+				    IEEE80211_CHAN_NO_HT40MINUS))
+					channel_type = NL80211_CHAN_HT40MINUS;
+				break;
+			}
+		}
+	}
+
+	ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
+		     channel_type != local->hw.conf.channel_type;
+
+	local->oper_channel_type = channel_type;
+
+	if (ht_changed) {
+                /* channel_type change automatically detected */
+		ieee80211_hw_config(local, 0);
+
+		rcu_read_lock();
+
+		sta = sta_info_get(local, ifmgd->bssid);
+		if (sta)
+			rate_control_rate_update(local, sband, sta,
+						 IEEE80211_RC_HT_CHANGED);
+
+		rcu_read_unlock();
+        }
+
+	/* disable HT */
+	if (!enable_ht)
+		return 0;
+
+	ht_opmode = le16_to_cpu(hti->operation_mode);
+
+	/* if bss configuration changed store the new one */
+	if (!sdata->ht_opmode_valid ||
+	    sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
+		changed |= BSS_CHANGED_HT;
+		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
+		sdata->ht_opmode_valid = true;
+	}
+
+	return changed;
+}
+
 /* frame sending functions */
 
 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
@@ -263,13 +356,13 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 
 		switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
 		case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-			if (flags & IEEE80211_CHAN_NO_FAT_ABOVE) {
+			if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
 				cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 				cap &= ~IEEE80211_HT_CAP_SGI_40;
 			}
 			break;
 		case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-			if (flags & IEEE80211_CHAN_NO_FAT_BELOW) {
+			if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
 				cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 				cap &= ~IEEE80211_HT_CAP_SGI_40;
 			}
@@ -325,6 +418,10 @@ static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata,
 	/* u.deauth.reason_code == u.disassoc.reason_code */
 	mgmt->u.deauth.reason_code = cpu_to_le16(reason);
 
+	if (stype == IEEE80211_STYPE_DEAUTH)
+		cfg80211_send_deauth(sdata->dev, (u8 *) mgmt, skb->len);
+	else
+		cfg80211_send_disassoc(sdata->dev, (u8 *) mgmt, skb->len);
 	ieee80211_tx_skb(sdata, skb, ifmgd->flags & IEEE80211_STA_MFP_ENABLED);
 }
 
@@ -359,6 +456,277 @@ void ieee80211_send_pspoll(struct ieee80211_local *local,
 	ieee80211_tx_skb(sdata, skb, 0);
 }
 
+void ieee80211_send_nullfunc(struct ieee80211_local *local,
+			     struct ieee80211_sub_if_data *sdata,
+			     int powersave)
+{
+	struct sk_buff *skb;
+	struct ieee80211_hdr *nullfunc;
+	__le16 fc;
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+		return;
+
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24);
+	if (!skb) {
+		printk(KERN_DEBUG "%s: failed to allocate buffer for nullfunc "
+		       "frame\n", sdata->dev->name);
+		return;
+	}
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+
+	nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24);
+	memset(nullfunc, 0, 24);
+	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
+			 IEEE80211_FCTL_TODS);
+	if (powersave)
+		fc |= cpu_to_le16(IEEE80211_FCTL_PM);
+	nullfunc->frame_control = fc;
+	memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
+	memcpy(nullfunc->addr2, sdata->dev->dev_addr, ETH_ALEN);
+	memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
+
+	ieee80211_tx_skb(sdata, skb, 0);
+}
+
+/* spectrum management related things */
+static void ieee80211_chswitch_work(struct work_struct *work)
+{
+	struct ieee80211_sub_if_data *sdata =
+		container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
+	struct ieee80211_bss *bss;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (!netif_running(sdata->dev))
+		return;
+
+	bss = ieee80211_rx_bss_get(sdata->local, ifmgd->bssid,
+				   sdata->local->hw.conf.channel->center_freq,
+				   ifmgd->ssid, ifmgd->ssid_len);
+	if (!bss)
+		goto exit;
+
+	sdata->local->oper_channel = sdata->local->csa_channel;
+	/* XXX: shouldn't really modify cfg80211-owned data! */
+	if (!ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL))
+		bss->cbss.channel = sdata->local->oper_channel;
+
+	ieee80211_rx_bss_put(sdata->local, bss);
+exit:
+	ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
+	ieee80211_wake_queues_by_reason(&sdata->local->hw,
+					IEEE80211_QUEUE_STOP_REASON_CSA);
+}
+
+static void ieee80211_chswitch_timer(unsigned long data)
+{
+	struct ieee80211_sub_if_data *sdata =
+		(struct ieee80211_sub_if_data *) data;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (sdata->local->quiescing) {
+		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
+		return;
+	}
+
+	queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
+}
+
+void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
+				      struct ieee80211_channel_sw_ie *sw_elem,
+				      struct ieee80211_bss *bss)
+{
+	struct ieee80211_channel *new_ch;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num);
+
+	if (ifmgd->state != IEEE80211_STA_MLME_ASSOCIATED)
+		return;
+
+	if (sdata->local->sw_scanning || sdata->local->hw_scanning)
+		return;
+
+	/* Disregard subsequent beacons if we are already running a timer
+	   processing a CSA */
+
+	if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED)
+		return;
+
+	new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
+	if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED)
+		return;
+
+	sdata->local->csa_channel = new_ch;
+
+	if (sw_elem->count <= 1) {
+		queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
+	} else {
+		ieee80211_stop_queues_by_reason(&sdata->local->hw,
+					IEEE80211_QUEUE_STOP_REASON_CSA);
+		ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
+		mod_timer(&ifmgd->chswitch_timer,
+			  jiffies +
+			  msecs_to_jiffies(sw_elem->count *
+					   bss->cbss.beacon_interval));
+	}
+}
+
+static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
+					u16 capab_info, u8 *pwr_constr_elem,
+					u8 pwr_constr_elem_len)
+{
+	struct ieee80211_conf *conf = &sdata->local->hw.conf;
+
+	if (!(capab_info & WLAN_CAPABILITY_SPECTRUM_MGMT))
+		return;
+
+	/* Power constraint IE length should be 1 octet */
+	if (pwr_constr_elem_len != 1)
+		return;
+
+	if ((*pwr_constr_elem <= conf->channel->max_power) &&
+	    (*pwr_constr_elem != sdata->local->power_constr_level)) {
+		sdata->local->power_constr_level = *pwr_constr_elem;
+		ieee80211_hw_config(sdata->local, 0);
+	}
+}
+
+/* powersave */
+static void ieee80211_enable_ps(struct ieee80211_local *local,
+				struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_conf *conf = &local->hw.conf;
+
+	/*
+	 * If we are scanning right now then the parameters will
+	 * take effect when scan finishes.
+	 */
+	if (local->hw_scanning || local->sw_scanning)
+		return;
+
+	if (conf->dynamic_ps_timeout > 0 &&
+	    !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
+		mod_timer(&local->dynamic_ps_timer, jiffies +
+			  msecs_to_jiffies(conf->dynamic_ps_timeout));
+	} else {
+		if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+			ieee80211_send_nullfunc(local, sdata, 1);
+		conf->flags |= IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+}
+
+static void ieee80211_change_ps(struct ieee80211_local *local)
+{
+	struct ieee80211_conf *conf = &local->hw.conf;
+
+	if (local->ps_sdata) {
+		ieee80211_enable_ps(local, local->ps_sdata);
+	} else if (conf->flags & IEEE80211_CONF_PS) {
+		conf->flags &= ~IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+		del_timer_sync(&local->dynamic_ps_timer);
+		cancel_work_sync(&local->dynamic_ps_enable_work);
+	}
+}
+
+/* need to hold RTNL or interface lock */
+void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
+{
+	struct ieee80211_sub_if_data *sdata, *found = NULL;
+	int count = 0;
+
+	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) {
+		local->ps_sdata = NULL;
+		return;
+	}
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+		if (sdata->vif.type != NL80211_IFTYPE_STATION)
+			continue;
+		found = sdata;
+		count++;
+	}
+
+	if (count == 1 && found->u.mgd.powersave &&
+	    (found->u.mgd.flags & IEEE80211_STA_ASSOCIATED) &&
+	    !(found->u.mgd.flags & IEEE80211_STA_PROBEREQ_POLL)) {
+		s32 beaconint_us;
+
+		if (latency < 0)
+			latency = pm_qos_requirement(PM_QOS_NETWORK_LATENCY);
+
+		beaconint_us = ieee80211_tu_to_usec(
+					found->vif.bss_conf.beacon_int);
+
+		if (beaconint_us > latency) {
+			local->ps_sdata = NULL;
+		} else {
+			u8 dtimper = found->vif.bss_conf.dtim_period;
+			int maxslp = 1;
+
+			if (dtimper > 1)
+				maxslp = min_t(int, dtimper,
+						    latency / beaconint_us);
+
+			local->hw.conf.max_sleep_period = maxslp;
+			local->ps_sdata = found;
+		}
+	} else {
+		local->ps_sdata = NULL;
+	}
+
+	ieee80211_change_ps(local);
+}
+
+void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     dynamic_ps_disable_work);
+
+	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+	}
+
+	ieee80211_wake_queues_by_reason(&local->hw,
+					IEEE80211_QUEUE_STOP_REASON_PS);
+}
+
+void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local,
+			     dynamic_ps_enable_work);
+	struct ieee80211_sub_if_data *sdata = local->ps_sdata;
+
+	/* can only happen when PS was just disabled anyway */
+	if (!sdata)
+		return;
+
+	if (local->hw.conf.flags & IEEE80211_CONF_PS)
+		return;
+
+	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+		ieee80211_send_nullfunc(local, sdata, 1);
+
+	local->hw.conf.flags |= IEEE80211_CONF_PS;
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+}
+
+void ieee80211_dynamic_ps_timer(unsigned long data)
+{
+	struct ieee80211_local *local = (void *) data;
+
+	if (local->quiescing)
+		return;
+
+	queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
+}
+
 /* MLME */
 static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 				     struct ieee80211_if_managed *ifmgd,
@@ -424,41 +792,16 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 		printk(KERN_DEBUG "%s: WMM queue=%d aci=%d acm=%d aifs=%d "
 		       "cWmin=%d cWmax=%d txop=%d\n",
-		       local->mdev->name, queue, aci, acm, params.aifs, params.cw_min,
-		       params.cw_max, params.txop);
+		       wiphy_name(local->hw.wiphy), queue, aci, acm,
+		       params.aifs, params.cw_min, params.cw_max, params.txop);
 #endif
-		if (local->ops->conf_tx &&
-		    local->ops->conf_tx(local_to_hw(local), queue, &params)) {
+		if (drv_conf_tx(local, queue, &params) && local->ops->conf_tx)
 			printk(KERN_DEBUG "%s: failed to set TX queue "
-			       "parameters for queue %d\n", local->mdev->name, queue);
-		}
+			       "parameters for queue %d\n",
+			       wiphy_name(local->hw.wiphy), queue);
 	}
 }
 
-static bool ieee80211_check_tim(struct ieee802_11_elems *elems, u16 aid)
-{
-	u8 mask;
-	u8 index, indexn1, indexn2;
-	struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim;
-
-	if (unlikely(!tim || elems->tim_len < 4))
-		return false;
-
-	aid &= 0x3fff;
-	index = aid / 8;
-	mask  = 1 << (aid & 7);
-
-	indexn1 = tim->bitmap_ctrl & 0xfe;
-	indexn2 = elems->tim_len + indexn1 - 4;
-
-	if (index < indexn1 || index > indexn2)
-		return false;
-
-	index -= indexn1;
-
-	return !!(tim->virtual_map[index] & mask);
-}
-
 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
 					   u16 capab, bool erp_valid, u8 erp)
 {
@@ -610,6 +953,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 		sdata->vif.bss_conf.timestamp = bss->cbss.tsf;
 		sdata->vif.bss_conf.dtim_period = bss->dtim_period;
 
+		bss_info_changed |= BSS_CHANGED_BEACON_INT;
 		bss_info_changed |= ieee80211_handle_bss_capability(sdata,
 			bss->cbss.capability, bss->has_erp_value, bss->erp_value);
 
@@ -632,20 +976,17 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 	 * changed or not.
 	 */
 	bss_info_changed |= BSS_CHANGED_BASIC_RATES;
+
+	/* And the BSSID changed - we're associated now */
+	bss_info_changed |= BSS_CHANGED_BSSID;
+
 	ieee80211_bss_info_change_notify(sdata, bss_info_changed);
 
-	if (local->powersave) {
-		if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) &&
-		    local->hw.conf.dynamic_ps_timeout > 0) {
-			mod_timer(&local->dynamic_ps_timer, jiffies +
-				  msecs_to_jiffies(
-					local->hw.conf.dynamic_ps_timeout));
-		} else {
-			if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
-				ieee80211_send_nullfunc(local, sdata, 1);
-			conf->flags |= IEEE80211_CONF_PS;
-			ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-		}
+	/* will be same as sdata */
+	if (local->ps_sdata) {
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
 	}
 
 	netif_tx_start_all_queues(sdata->dev);
@@ -664,7 +1005,8 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata)
 		printk(KERN_DEBUG "%s: direct probe to AP %pM timed out\n",
 		       sdata->dev->name, ifmgd->bssid);
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
-		ieee80211_sta_send_apinfo(sdata);
+		ieee80211_recalc_idle(local);
+		cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid);
 
 		/*
 		 * Most likely AP is not in the range so remove the
@@ -689,8 +1031,6 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata)
 
 	ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE;
 
-	set_bit(IEEE80211_STA_REQ_DIRECT_PROBE, &ifmgd->request);
-
 	/* Direct probe is sent to broadcast address as some APs
 	 * will not answer to direct packet in unassociated state.
 	 */
@@ -714,7 +1054,8 @@ static void ieee80211_authenticate(struct ieee80211_sub_if_data *sdata)
 		       " timed out\n",
 		       sdata->dev->name, ifmgd->bssid);
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
-		ieee80211_sta_send_apinfo(sdata);
+		ieee80211_recalc_idle(local);
+		cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid);
 		ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
 				sdata->local->hw.conf.channel->center_freq,
 				ifmgd->ssid, ifmgd->ssid_len);
@@ -817,9 +1158,16 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 
 	rcu_read_unlock();
 
+	ieee80211_set_wmm_default(sdata);
+
+	ieee80211_recalc_idle(local);
+
 	/* channel(_type) changes are handled by ieee80211_hw_config */
 	local->oper_channel_type = NL80211_CHAN_NO_HT;
 
+	/* on the next assoc, re-program HT parameters */
+	sdata->ht_opmode_valid = false;
+
 	local->power_constr_level = 0;
 
 	del_timer_sync(&local->dynamic_ps_timer);
@@ -831,6 +1179,9 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	}
 
 	ieee80211_hw_config(local, config_changed);
+
+	/* And the BSSID changed -- not very interesting here */
+	changed |= BSS_CHANGED_BSSID;
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	rcu_read_lock();
@@ -897,7 +1248,8 @@ static void ieee80211_associate(struct ieee80211_sub_if_data *sdata)
 		       " timed out\n",
 		       sdata->dev->name, ifmgd->bssid);
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
-		ieee80211_sta_send_apinfo(sdata);
+		ieee80211_recalc_idle(local);
+		cfg80211_send_assoc_timeout(sdata->dev, ifmgd->bssid);
 		ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
 				sdata->local->hw.conf.channel->center_freq,
 				ifmgd->ssid, ifmgd->ssid_len);
@@ -917,6 +1269,7 @@ static void ieee80211_associate(struct ieee80211_sub_if_data *sdata)
 		printk(KERN_DEBUG "%s: mismatch in privacy configuration and "
 		       "mixed-cell disabled - abort association\n", sdata->dev->name);
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+		ieee80211_recalc_idle(local);
 		return;
 	}
 
@@ -948,6 +1301,17 @@ void ieee80211_beacon_loss_work(struct work_struct *work)
 			     u.mgd.beacon_loss_work);
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	/*
+	 * The driver has already reported this event and we have
+	 * already sent a probe request. Maybe the AP died and the
+	 * driver keeps reporting until we disassociate... We have
+	 * to ignore that because otherwise we would continually
+	 * reset the timer and never check whether we received a
+	 * probe response!
+	 */
+	if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL)
+		return;
+
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 	if (net_ratelimit()) {
 		printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
@@ -957,10 +1321,15 @@ void ieee80211_beacon_loss_work(struct work_struct *work)
 #endif
 
 	ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+
+	mutex_lock(&sdata->local->iflist_mtx);
+	ieee80211_recalc_ps(sdata->local, -1);
+	mutex_unlock(&sdata->local->iflist_mtx);
+
 	ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
 				 ifmgd->ssid_len, NULL, 0);
 
-	mod_timer(&ifmgd->timer, jiffies + IEEE80211_MONITORING_INTERVAL);
+	mod_timer(&ifmgd->timer, jiffies + IEEE80211_PROBE_WAIT);
 }
 
 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
@@ -977,6 +1346,7 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
+	unsigned long last_rx;
 	bool disassoc = false;
 
 	/* TODO: start monitoring current AP signal quality and number of
@@ -993,17 +1363,21 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
 		printk(KERN_DEBUG "%s: No STA entry for own AP %pM\n",
 		       sdata->dev->name, ifmgd->bssid);
 		disassoc = true;
-		goto unlock;
+		rcu_read_unlock();
+		goto out;
 	}
 
+	last_rx = sta->last_rx;
+	rcu_read_unlock();
+
 	if ((ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) &&
-	    time_after(jiffies, sta->last_rx + IEEE80211_MONITORING_INTERVAL)) {
+	    time_after(jiffies, last_rx + IEEE80211_PROBE_WAIT)) {
 		printk(KERN_DEBUG "%s: no probe response from AP %pM "
 		       "- disassociating\n",
 		       sdata->dev->name, ifmgd->bssid);
 		disassoc = true;
 		ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
-		goto unlock;
+		goto out;
 	}
 
 	/*
@@ -1022,27 +1396,31 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
 		}
 #endif
 		ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
 		ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
 					 ifmgd->ssid_len, NULL, 0);
-		goto unlock;
-
+		mod_timer(&ifmgd->timer, jiffies + IEEE80211_PROBE_WAIT);
+		goto out;
 	}
 
-	if (time_after(jiffies, sta->last_rx + IEEE80211_PROBE_IDLE_TIME)) {
+	if (time_after(jiffies, last_rx + IEEE80211_PROBE_IDLE_TIME)) {
 		ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
 		ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
 					 ifmgd->ssid_len, NULL, 0);
 	}
 
- unlock:
-	rcu_read_unlock();
-
-	if (disassoc)
+ out:
+	if (!disassoc)
+		mod_timer(&ifmgd->timer,
+			  jiffies + IEEE80211_MONITORING_INTERVAL);
+	else
 		ieee80211_set_disassoc(sdata, true, true,
 					WLAN_REASON_PREV_AUTH_NOT_VALID);
-	else
-		mod_timer(&ifmgd->timer, jiffies +
-				      IEEE80211_MONITORING_INTERVAL);
 }
 
 
@@ -1055,6 +1433,7 @@ static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata)
 	if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
 		/* Wait for SME to request association */
 		ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+		ieee80211_recalc_idle(sdata->local);
 	} else
 		ieee80211_associate(sdata);
 }
@@ -1187,7 +1566,7 @@ static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
 
 	ieee80211_set_disassoc(sdata, true, false, 0);
 	ifmgd->flags &= ~IEEE80211_STA_AUTHENTICATED;
-	cfg80211_send_rx_deauth(sdata->dev, (u8 *) mgmt, len);
+	cfg80211_send_deauth(sdata->dev, (u8 *) mgmt, len);
 }
 
 
@@ -1218,7 +1597,7 @@ static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
 	}
 
 	ieee80211_set_disassoc(sdata, false, false, reason_code);
-	cfg80211_send_rx_disassoc(sdata->dev, (u8 *) mgmt, len);
+	cfg80211_send_disassoc(sdata->dev, (u8 *) mgmt, len);
 }
 
 
@@ -1287,6 +1666,12 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 		 * association next time. This works around some broken APs
 		 * which do not correctly reject reassociation requests. */
 		ifmgd->flags &= ~IEEE80211_STA_PREV_BSSID_SET;
+		cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, len);
+		if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
+			/* Wait for SME to decide what to do next */
+			ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+			ieee80211_recalc_idle(local);
+		}
 		return;
 	}
 
@@ -1340,8 +1725,9 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	 *	  to between the sta_info_alloc() and sta_info_insert() above.
 	 */
 
-	set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP |
-			   WLAN_STA_AUTHORIZED);
+	set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP);
+	if (!(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
+		set_sta_flags(sta, WLAN_STA_AUTHORIZED);
 
 	rates = 0;
 	basic_rates = 0;
@@ -1421,6 +1807,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	if (elems.wmm_param)
 		ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param,
 					 elems.wmm_param_len);
+	else
+		ieee80211_set_wmm_default(sdata);
 
 	if (elems.ht_info_elem && elems.wmm_param &&
 	    (ifmgd->flags & IEEE80211_STA_WMM_ENABLED) &&
@@ -1476,7 +1864,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 	    (memcmp(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN) == 0)) {
 		struct ieee80211_channel_sw_ie *sw_elem =
 			(struct ieee80211_channel_sw_ie *)elems->ch_switch_elem;
-		ieee80211_process_chanswitch(sdata, sw_elem, bss);
+		ieee80211_sta_process_chanswitch(sdata, sw_elem, bss);
 	}
 
 	ieee80211_rx_bss_put(local, bss);
@@ -1507,57 +1895,98 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
 	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
 
 	/* direct probe may be part of the association flow */
-	if (test_and_clear_bit(IEEE80211_STA_REQ_DIRECT_PROBE,
-			       &ifmgd->request)) {
+	if (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE) {
 		printk(KERN_DEBUG "%s direct probe responded\n",
 		       sdata->dev->name);
 		ieee80211_authenticate(sdata);
 	}
 
-	if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL)
+	if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
 		ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+		mutex_lock(&sdata->local->iflist_mtx);
+		ieee80211_recalc_ps(sdata->local, -1);
+		mutex_unlock(&sdata->local->iflist_mtx);
+	}
 }
 
+/*
+ * This is the canonical list of information elements we care about,
+ * the filter code also gives us all changes to the Microsoft OUI
+ * (00:50:F2) vendor IE which is used for WMM which we need to track.
+ *
+ * We implement beacon filtering in software since that means we can
+ * avoid processing the frame here and in cfg80211, and userspace
+ * will not be able to tell whether the hardware supports it or not.
+ *
+ * XXX: This list needs to be dynamic -- userspace needs to be able to
+ *	add items it requires. It also needs to be able to tell us to
+ *	look out for other vendor IEs.
+ */
+static const u64 care_about_ies =
+	(1ULL << WLAN_EID_COUNTRY) |
+	(1ULL << WLAN_EID_ERP_INFO) |
+	(1ULL << WLAN_EID_CHANNEL_SWITCH) |
+	(1ULL << WLAN_EID_PWR_CONSTRAINT) |
+	(1ULL << WLAN_EID_HT_CAPABILITY) |
+	(1ULL << WLAN_EID_HT_INFORMATION);
+
 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 				     struct ieee80211_mgmt *mgmt,
 				     size_t len,
 				     struct ieee80211_rx_status *rx_status)
 {
-	struct ieee80211_if_managed *ifmgd;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	size_t baselen;
 	struct ieee802_11_elems elems;
 	struct ieee80211_local *local = sdata->local;
 	u32 changed = 0;
-	bool erp_valid, directed_tim;
+	bool erp_valid, directed_tim = false;
 	u8 erp_value = 0;
+	u32 ncrc;
 
 	/* Process beacon from the current BSS */
 	baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
 	if (baselen > len)
 		return;
 
-	ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
-
-	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, true);
-
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+	if (rx_status->freq != local->hw.conf.channel->center_freq)
 		return;
 
-	ifmgd = &sdata->u.mgd;
-
 	if (!(ifmgd->flags & IEEE80211_STA_ASSOCIATED) ||
 	    memcmp(ifmgd->bssid, mgmt->bssid, ETH_ALEN) != 0)
 		return;
 
-	if (rx_status->freq != local->hw.conf.channel->center_freq)
-		return;
+	if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "%s: cancelling probereq poll due "
+			       "to a received beacon\n", sdata->dev->name);
+		}
+#endif
+		ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+		mutex_lock(&local->iflist_mtx);
+		ieee80211_recalc_ps(local, -1);
+		mutex_unlock(&local->iflist_mtx);
+	}
 
-	ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param,
-				 elems.wmm_param_len);
+	ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
+	ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
+					  len - baselen, &elems,
+					  care_about_ies, ncrc);
 
-	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
-		directed_tim = ieee80211_check_tim(&elems, ifmgd->aid);
+	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+		directed_tim = ieee80211_check_tim(elems.tim, elems.tim_len,
+						   ifmgd->aid);
 
+	if (ncrc != ifmgd->beacon_crc) {
+		ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems,
+				      true);
+
+		ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param,
+					 elems.wmm_param_len);
+	}
+
+	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
 		if (directed_tim) {
 			if (local->hw.conf.dynamic_ps_timeout > 0) {
 				local->hw.conf.flags &= ~IEEE80211_CONF_PS;
@@ -1580,6 +2009,10 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
+	if (ncrc == ifmgd->beacon_crc)
+		return;
+	ifmgd->beacon_crc = ncrc;
+
 	if (elems.erp_info && elems.erp_info_len >= 1) {
 		erp_valid = true;
 		erp_value = elems.erp_info[0];
@@ -1714,6 +2147,11 @@ static void ieee80211_sta_timer(unsigned long data)
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_local *local = sdata->local;
 
+	if (local->quiescing) {
+		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
+		return;
+	}
+
 	set_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request);
 	queue_work(local->hw.workqueue, &ifmgd->work);
 }
@@ -1723,10 +2161,8 @@ static void ieee80211_sta_reset_auth(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_local *local = sdata->local;
 
-	if (local->ops->reset_tsf) {
-		/* Reset own TSF to allow time synchronization work. */
-		local->ops->reset_tsf(local_to_hw(local));
-	}
+	/* Reset own TSF to allow time synchronization work. */
+	drv_reset_tsf(local);
 
 	ifmgd->wmm_last_param_set = -1; /* allow any WMM update */
 
@@ -1814,25 +2250,18 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata)
 		return 0;
 	} else {
 		if (ifmgd->assoc_scan_tries < IEEE80211_ASSOC_SCANS_MAX_TRIES) {
+
 			ifmgd->assoc_scan_tries++;
-			/* XXX maybe racy? */
-			if (local->scan_req)
-				return -1;
-			memcpy(local->int_scan_req.ssids[0].ssid,
-			       ifmgd->ssid, IEEE80211_MAX_SSID_LEN);
-			if (ifmgd->flags & IEEE80211_STA_AUTO_SSID_SEL)
-				local->int_scan_req.ssids[0].ssid_len = 0;
-			else
-				local->int_scan_req.ssids[0].ssid_len = ifmgd->ssid_len;
 
-			if (ieee80211_start_scan(sdata, &local->int_scan_req))
-				ieee80211_scan_failed(local);
+			ieee80211_request_internal_scan(sdata, ifmgd->ssid,
+							ssid_len);
 
 			ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE;
 			set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request);
 		} else {
 			ifmgd->assoc_scan_tries = 0;
 			ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+			ieee80211_recalc_idle(local);
 		}
 	}
 	return -1;
@@ -1855,6 +2284,17 @@ static void ieee80211_sta_work(struct work_struct *work)
 
 	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
 		return;
+
+	/*
+	 * Nothing should have been stuffed into the workqueue during
+	 * the suspend->resume cycle. If this WARN is seen then there
+	 * is a bug with either the driver suspend or something in
+	 * mac80211 stuffing into the workqueue which we haven't yet
+	 * cleared during mac80211's suspend cycle.
+	 */
+	if (WARN_ON(local->suspended))
+		return;
+
 	ifmgd = &sdata->u.mgd;
 
 	while ((skb = skb_dequeue(&ifmgd->skb_queue)))
@@ -1864,14 +2304,8 @@ static void ieee80211_sta_work(struct work_struct *work)
 	    ifmgd->state != IEEE80211_STA_MLME_AUTHENTICATE &&
 	    ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE &&
 	    test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request)) {
-		/*
-		 * The call to ieee80211_start_scan can fail but ieee80211_request_scan
-		 * (which queued ieee80211_sta_work) did not return an error. Thus, call
-		 * ieee80211_scan_failed here if ieee80211_start_scan fails in order to
-		 * notify the scan requester.
-		 */
-		if (ieee80211_start_scan(sdata, local->scan_req))
-			ieee80211_scan_failed(local);
+		queue_delayed_work(local->hw.workqueue, &local->scan_work,
+				   round_jiffies_relative(0));
 		return;
 	}
 
@@ -1882,6 +2316,8 @@ static void ieee80211_sta_work(struct work_struct *work)
 	} else if (!test_and_clear_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request))
 		return;
 
+	ieee80211_recalc_idle(local);
+
 	switch (ifmgd->state) {
 	case IEEE80211_STA_MLME_DISABLED:
 		break;
@@ -1926,10 +2362,43 @@ static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
 	}
 }
 
+#ifdef CONFIG_PM
+void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	/*
+	 * we need to use atomic bitops for the running bits
+	 * only because both timers might fire at the same
+	 * time -- the code here is properly synchronised.
+	 */
+
+	cancel_work_sync(&ifmgd->work);
+	cancel_work_sync(&ifmgd->beacon_loss_work);
+	if (del_timer_sync(&ifmgd->timer))
+		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
+
+	cancel_work_sync(&ifmgd->chswitch_work);
+	if (del_timer_sync(&ifmgd->chswitch_timer))
+		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
+}
+
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running))
+		add_timer(&ifmgd->timer);
+	if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
+		add_timer(&ifmgd->chswitch_timer);
+}
+#endif
+
 /* interface setup */
 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd;
+	u32 hw_flags;
 
 	ifmgd = &sdata->u.mgd;
 	INIT_WORK(&ifmgd->work, ieee80211_sta_work);
@@ -1949,6 +2418,13 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
 		IEEE80211_STA_AUTO_CHANNEL_SEL;
 	if (sdata->local->hw.queues >= 4)
 		ifmgd->flags |= IEEE80211_STA_WMM_ENABLED;
+
+	hw_flags = sdata->local->hw.flags;
+
+	if (hw_flags & IEEE80211_HW_SUPPORTS_PS) {
+		ifmgd->powersave = CONFIG_MAC80211_DEFAULT_PS_VALUE;
+		sdata->local->hw.conf.dynamic_ps_timeout = 500;
+	}
 }
 
 /* configuration hooks */
@@ -2032,13 +2508,6 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
 		ifmgd->flags &= ~IEEE80211_STA_BSSID_SET;
 	}
 
-	if (netif_running(sdata->dev)) {
-		if (ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID)) {
-			printk(KERN_DEBUG "%s: Failed to config new BSSID to "
-			       "the low-level driver\n", sdata->dev->name);
-		}
-	}
-
 	return ieee80211_sta_commit(sdata);
 }
 
@@ -2047,6 +2516,13 @@ int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	if (len == 0 && ifmgd->extra_ie_len == 0)
+		return -EALREADY;
+
+	if (len == ifmgd->extra_ie_len && ifmgd->extra_ie &&
+	    memcmp(ifmgd->extra_ie, ie, len) == 0)
+		return -EALREADY;
+
 	kfree(ifmgd->extra_ie);
 	if (len == 0) {
 		ifmgd->extra_ie = NULL;
@@ -2068,9 +2544,6 @@ int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason
 	printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n",
 	       sdata->dev->name, reason);
 
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
-		return -EINVAL;
-
 	ieee80211_set_disassoc(sdata, true, true, reason);
 	return 0;
 }
@@ -2082,9 +2555,6 @@ int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason)
 	printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n",
 	       sdata->dev->name, reason);
 
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
-		return -EINVAL;
-
 	if (!(ifmgd->flags & IEEE80211_STA_ASSOCIATED))
 		return -ENOLINK;
 
@@ -2104,75 +2574,17 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
 	rcu_read_unlock();
 }
 
-void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
+int ieee80211_max_network_latency(struct notifier_block *nb,
+				  unsigned long data, void *dummy)
 {
+	s32 latency_usec = (s32) data;
 	struct ieee80211_local *local =
-		container_of(work, struct ieee80211_local,
-			     dynamic_ps_disable_work);
-
-	if (local->hw.conf.flags & IEEE80211_CONF_PS) {
-		local->hw.conf.flags &= ~IEEE80211_CONF_PS;
-		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-	}
-
-	ieee80211_wake_queues_by_reason(&local->hw,
-					IEEE80211_QUEUE_STOP_REASON_PS);
-}
-
-void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
-{
-	struct ieee80211_local *local =
-		container_of(work, struct ieee80211_local,
-			     dynamic_ps_enable_work);
-	/* XXX: using scan_sdata is completely broken! */
-	struct ieee80211_sub_if_data *sdata = local->scan_sdata;
-
-	if (local->hw.conf.flags & IEEE80211_CONF_PS)
-		return;
-
-	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata)
-		ieee80211_send_nullfunc(local, sdata, 1);
-
-	local->hw.conf.flags |= IEEE80211_CONF_PS;
-	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-}
-
-void ieee80211_dynamic_ps_timer(unsigned long data)
-{
-	struct ieee80211_local *local = (void *) data;
-
-	queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
-}
-
-void ieee80211_send_nullfunc(struct ieee80211_local *local,
-			     struct ieee80211_sub_if_data *sdata,
-			     int powersave)
-{
-	struct sk_buff *skb;
-	struct ieee80211_hdr *nullfunc;
-	__le16 fc;
+		container_of(nb, struct ieee80211_local,
+			     network_latency_notifier);
 
-	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
-		return;
-
-	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24);
-	if (!skb) {
-		printk(KERN_DEBUG "%s: failed to allocate buffer for nullfunc "
-		       "frame\n", sdata->dev->name);
-		return;
-	}
-	skb_reserve(skb, local->hw.extra_tx_headroom);
+	mutex_lock(&local->iflist_mtx);
+	ieee80211_recalc_ps(local, latency_usec);
+	mutex_unlock(&local->iflist_mtx);
 
-	nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24);
-	memset(nullfunc, 0, 24);
-	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
-			 IEEE80211_FCTL_TODS);
-	if (powersave)
-		fc |= cpu_to_le16(IEEE80211_FCTL_PM);
-	nullfunc->frame_control = fc;
-	memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
-	memcpy(nullfunc->addr2, sdata->dev->dev_addr, ETH_ALEN);
-	memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
-
-	ieee80211_tx_skb(sdata, skb, 0);
+	return 0;
 }
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 81985d27cbd..7a549f9deb9 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -2,6 +2,8 @@
 #include <net/rtnetlink.h>
 
 #include "ieee80211_i.h"
+#include "mesh.h"
+#include "driver-ops.h"
 #include "led.h"
 
 int __ieee80211_suspend(struct ieee80211_hw *hw)
@@ -12,11 +14,30 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 	struct sta_info *sta;
 	unsigned long flags;
 
+	ieee80211_scan_cancel(local);
+
 	ieee80211_stop_queues_by_reason(hw,
 			IEEE80211_QUEUE_STOP_REASON_SUSPEND);
 
+	/* flush out all packets */
+	synchronize_net();
+
+	local->quiescing = true;
+	/* make quiescing visible to timers everywhere */
+	mb();
+
 	flush_workqueue(local->hw.workqueue);
 
+	/* Don't try to run timers while suspended. */
+	del_timer_sync(&local->sta_cleanup);
+
+	 /*
+	 * Note that this particular timer doesn't need to be
+	 * restarted at resume.
+	 */
+	cancel_work_sync(&local->dynamic_ps_enable_work);
+	del_timer_sync(&local->dynamic_ps_timer);
+
 	/* disable keys */
 	list_for_each_entry(sdata, &local->interfaces, list)
 		ieee80211_disable_keys(sdata);
@@ -34,157 +55,70 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 
 	rcu_read_unlock();
 
-	/* remove STAs */
-	if (local->ops->sta_notify) {
-		spin_lock_irqsave(&local->sta_lock, flags);
-		list_for_each_entry(sta, &local->sta_list, list) {
-			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-				sdata = container_of(sdata->bss,
-					     struct ieee80211_sub_if_data,
-					     u.ap);
-
-			local->ops->sta_notify(hw, &sdata->vif,
-				STA_NOTIFY_REMOVE, &sta->sta);
-		}
-		spin_unlock_irqrestore(&local->sta_lock, flags);
-	}
-
-	/* remove all interfaces */
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
-		    sdata->vif.type != NL80211_IFTYPE_MONITOR &&
-		    netif_running(sdata->dev)) {
-			conf.vif = &sdata->vif;
-			conf.type = sdata->vif.type;
-			conf.mac_addr = sdata->dev->dev_addr;
-			local->ops->remove_interface(hw, &conf);
-		}
-	}
-
 	/* flush again, in case driver queued work */
 	flush_workqueue(local->hw.workqueue);
 
-	/* stop hardware */
+	/* stop hardware - this must stop RX */
 	if (local->open_count) {
 		ieee80211_led_radio(local, false);
-		local->ops->stop(hw);
-	}
-	return 0;
-}
-
-int __ieee80211_resume(struct ieee80211_hw *hw)
-{
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct ieee80211_sub_if_data *sdata;
-	struct ieee80211_if_init_conf conf;
-	struct sta_info *sta;
-	unsigned long flags;
-	int res;
-
-	/* restart hardware */
-	if (local->open_count) {
-		res = local->ops->start(hw);
-
-		ieee80211_led_radio(local, hw->conf.radio_enabled);
+		drv_stop(local);
 	}
 
-	/* add interfaces */
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
-		    sdata->vif.type != NL80211_IFTYPE_MONITOR &&
-		    netif_running(sdata->dev)) {
-			conf.vif = &sdata->vif;
-			conf.type = sdata->vif.type;
-			conf.mac_addr = sdata->dev->dev_addr;
-			res = local->ops->add_interface(hw, &conf);
-		}
-	}
-
-	/* add STAs back */
-	if (local->ops->sta_notify) {
-		spin_lock_irqsave(&local->sta_lock, flags);
-		list_for_each_entry(sta, &local->sta_list, list) {
+	/* remove STAs */
+	spin_lock_irqsave(&local->sta_lock, flags);
+	list_for_each_entry(sta, &local->sta_list, list) {
+		if (local->ops->sta_notify) {
+			sdata = sta->sdata;
 			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 				sdata = container_of(sdata->bss,
 					     struct ieee80211_sub_if_data,
 					     u.ap);
 
-			local->ops->sta_notify(hw, &sdata->vif,
-				STA_NOTIFY_ADD, &sta->sta);
+			drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
+				       &sta->sta);
 		}
-		spin_unlock_irqrestore(&local->sta_lock, flags);
-	}
-
-	/* Clear Suspend state so that ADDBA requests can be processed */
-
-	rcu_read_lock();
 
-	if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
-		list_for_each_entry_rcu(sta, &local->sta_list, list) {
-			clear_sta_flags(sta, WLAN_STA_SUSPEND);
-		}
+		mesh_plink_quiesce(sta);
 	}
+	spin_unlock_irqrestore(&local->sta_lock, flags);
 
-	rcu_read_unlock();
-
-	/* add back keys */
-	list_for_each_entry(sdata, &local->interfaces, list)
-		if (netif_running(sdata->dev))
-			ieee80211_enable_keys(sdata);
-
-	/* setup RTS threshold */
-	if (local->ops->set_rts_threshold)
-		local->ops->set_rts_threshold(hw, local->rts_threshold);
-
-	/* reconfigure hardware */
-	ieee80211_hw_config(local, ~0);
-
-	netif_addr_lock_bh(local->mdev);
-	ieee80211_configure_filter(local);
-	netif_addr_unlock_bh(local->mdev);
-
-	/* Finally also reconfigure all the BSS information */
+	/* remove all interfaces */
 	list_for_each_entry(sdata, &local->interfaces, list) {
-		u32 changed = ~0;
-		if (!netif_running(sdata->dev))
-			continue;
-		switch (sdata->vif.type) {
+		switch(sdata->vif.type) {
 		case NL80211_IFTYPE_STATION:
-			/* disable beacon change bits */
-			changed &= ~IEEE80211_IFCC_BEACON;
-			/* fall through */
+			ieee80211_sta_quiesce(sdata);
+			break;
 		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_AP:
-		case NL80211_IFTYPE_MESH_POINT:
-			/*
-			 * Driver's config_interface can fail if rfkill is
-			 * enabled. Accommodate this return code.
-			 * FIXME: When mac80211 has knowledge of rfkill
-			 * state the code below can change back to:
-			 *   WARN(ieee80211_if_config(sdata, changed));
-			 *   ieee80211_bss_info_change_notify(sdata, ~0);
-			 */
-			if (ieee80211_if_config(sdata, changed))
-				printk(KERN_DEBUG "%s: failed to configure interface during resume\n",
-				       sdata->dev->name);
-			else
-				ieee80211_bss_info_change_notify(sdata, ~0);
+			ieee80211_ibss_quiesce(sdata);
 			break;
-		case NL80211_IFTYPE_WDS:
+		case NL80211_IFTYPE_MESH_POINT:
+			ieee80211_mesh_quiesce(sdata);
 			break;
 		case NL80211_IFTYPE_AP_VLAN:
 		case NL80211_IFTYPE_MONITOR:
-			/* ignore virtual */
-			break;
-		case NL80211_IFTYPE_UNSPECIFIED:
-		case __NL80211_IFTYPE_AFTER_LAST:
-			WARN_ON(1);
+			/* don't tell driver about this */
+			continue;
+		default:
 			break;
 		}
+
+		if (!netif_running(sdata->dev))
+			continue;
+
+		conf.vif = &sdata->vif;
+		conf.type = sdata->vif.type;
+		conf.mac_addr = sdata->dev->dev_addr;
+		drv_remove_interface(local, &conf);
 	}
 
-	ieee80211_wake_queues_by_reason(hw,
-			IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+	local->suspended = true;
+	local->quiescing = false;
 
 	return 0;
 }
+
+/*
+ * __ieee80211_resume() is a static inline which just calls
+ * ieee80211_reconfig(), which is also needed for hardware
+ * hang/firmware failure/etc. recovery.
+ */
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index d9233ec5061..b218b98fba7 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -80,8 +80,7 @@ use_low_rate(struct sk_buff *skb)
 	fc = le16_to_cpu(hdr->frame_control);
 
 	return ((info->flags & IEEE80211_TX_CTL_NO_ACK) ||
-		(fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
-		is_multicast_ether_addr(hdr->addr1));
+		(fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA);
 }
 
 
@@ -216,7 +215,7 @@ minstrel_get_next_sample(struct minstrel_sta_info *mi)
 	unsigned int sample_ndx;
 	sample_ndx = SAMPLE_TBL(mi, mi->sample_idx, mi->sample_column);
 	mi->sample_idx++;
-	if (mi->sample_idx > (mi->n_rates - 2)) {
+	if ((int) mi->sample_idx > (mi->n_rates - 2)) {
 		mi->sample_idx = 0;
 		mi->sample_column++;
 		if (mi->sample_column >= SAMPLE_COLUMNS)
@@ -245,7 +244,10 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
 
 	if (!sta || !mi || use_low_rate(skb)) {
 		ar[0].idx = rate_lowest_index(sband, sta);
-		ar[0].count = mp->max_retry;
+		if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+			ar[0].count = 1;
+		else
+			ar[0].count = mp->max_retry;
 		return;
 	}
 
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index 8bef9a1262f..a0bef767ceb 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -289,13 +289,15 @@ rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta,
 		info->control.rates[0].count =
 			txrc->hw->conf.short_frame_max_tx_count;
 
-	/* Send management frames and broadcast/multicast data using lowest
-	 * rate. */
+	/* Send management frames and NO_ACK data using lowest rate. */
 	fc = le16_to_cpu(hdr->frame_control);
 	if (!sta || !spinfo ||
 	    (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
-	    is_multicast_ether_addr(hdr->addr1)) {
+	    info->flags & IEEE80211_TX_CTL_NO_ACK) {
 		info->control.rates[0].idx = rate_lowest_index(sband, sta);
+		if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+			info->control.rates[0].count = 1;
+
 		return;
 	}
 
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 9776f73c51a..de5bba7f910 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -19,6 +19,7 @@
 #include <net/ieee80211_radiotap.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "led.h"
 #include "mesh.h"
 #include "wep.h"
@@ -629,15 +630,6 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 	 * possible.
 	 */
 
-	if (!ieee80211_has_protected(hdr->frame_control)) {
-		if (!ieee80211_is_mgmt(hdr->frame_control) ||
-		    rx->sta == NULL || !test_sta_flags(rx->sta, WLAN_STA_MFP))
-			return RX_CONTINUE;
-		mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb);
-		if (mmie_keyidx < 0)
-			return RX_CONTINUE;
-	}
-
 	/*
 	 * No point in finding a key and decrypting if the frame is neither
 	 * addressed to us nor a multicast frame.
@@ -648,8 +640,14 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 	if (rx->sta)
 		stakey = rcu_dereference(rx->sta->key);
 
+	if (!ieee80211_has_protected(hdr->frame_control))
+		mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb);
+
 	if (!is_multicast_ether_addr(hdr->addr1) && stakey) {
 		rx->key = stakey;
+		/* Skip decryption if the frame is not protected. */
+		if (!ieee80211_has_protected(hdr->frame_control))
+			return RX_CONTINUE;
 	} else if (mmie_keyidx >= 0) {
 		/* Broadcast/multicast robust management frame / BIP */
 		if ((rx->status->flag & RX_FLAG_DECRYPTED) &&
@@ -660,6 +658,21 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 		    mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS)
 			return RX_DROP_MONITOR; /* unexpected BIP keyidx */
 		rx->key = rcu_dereference(rx->sdata->keys[mmie_keyidx]);
+	} else if (!ieee80211_has_protected(hdr->frame_control)) {
+		/*
+		 * The frame was not protected, so skip decryption. However, we
+		 * need to set rx->key if there is a key that could have been
+		 * used so that the frame may be dropped if encryption would
+		 * have been expected.
+		 */
+		struct ieee80211_key *key = NULL;
+		if (ieee80211_is_mgmt(hdr->frame_control) &&
+		    is_multicast_ether_addr(hdr->addr1) &&
+		    (key = rcu_dereference(rx->sdata->default_mgmt_key)))
+			rx->key = key;
+		else if ((key = rcu_dereference(rx->sdata->default_key)))
+			rx->key = key;
+		return RX_CONTINUE;
 	} else {
 		/*
 		 * The device doesn't give us the IV so we won't be
@@ -773,9 +786,7 @@ static void ap_sta_ps_start(struct sta_info *sta)
 
 	atomic_inc(&sdata->bss->num_sta_ps);
 	set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL);
-	if (local->ops->sta_notify)
-		local->ops->sta_notify(local_to_hw(local), &sdata->vif,
-					STA_NOTIFY_SLEEP, &sta->sta);
+	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta);
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
 	       sdata->dev->name, sta->sta.addr, sta->sta.aid);
@@ -786,15 +797,12 @@ static int ap_sta_ps_end(struct sta_info *sta)
 {
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 	struct ieee80211_local *local = sdata->local;
-	struct sk_buff *skb;
-	int sent = 0;
+	int sent, buffered;
 
 	atomic_dec(&sdata->bss->num_sta_ps);
 
 	clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL);
-	if (local->ops->sta_notify)
-		local->ops->sta_notify(local_to_hw(local), &sdata->vif,
-					STA_NOTIFY_AWAKE, &sta->sta);
+	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
 
 	if (!skb_queue_empty(&sta->ps_tx_buf))
 		sta_info_clear_tim_bit(sta);
@@ -805,22 +813,16 @@ static int ap_sta_ps_end(struct sta_info *sta)
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
 
 	/* Send all buffered frames to the station */
-	while ((skb = skb_dequeue(&sta->tx_filtered)) != NULL) {
-		sent++;
-		skb->requeue = 1;
-		dev_queue_xmit(skb);
-	}
-	while ((skb = skb_dequeue(&sta->ps_tx_buf)) != NULL) {
-		local->total_ps_buffered--;
-		sent++;
+	sent = ieee80211_add_pending_skbs(local, &sta->tx_filtered);
+	buffered = ieee80211_add_pending_skbs(local, &sta->ps_tx_buf);
+	sent += buffered;
+	local->total_ps_buffered -= buffered;
+
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-		printk(KERN_DEBUG "%s: STA %pM aid %d send PS frame "
-		       "since STA not sleeping anymore\n", sdata->dev->name,
-		       sta->sta.addr, sta->sta.aid);
+	printk(KERN_DEBUG "%s: STA %pM aid %d sending %d filtered/%d PS frames "
+	       "since STA not sleeping anymore\n", sdata->dev->name,
+	       sta->sta.addr, sta->sta.aid, sent - buffered, buffered);
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
-		skb->requeue = 1;
-		dev_queue_xmit(skb);
-	}
 
 	return sent;
 }
@@ -1212,109 +1214,38 @@ ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 	/* Drop unencrypted frames if key is set. */
 	if (unlikely(!ieee80211_has_protected(fc) &&
 		     !ieee80211_is_nullfunc(fc) &&
-		     (!ieee80211_is_mgmt(fc) ||
-		      (ieee80211_is_unicast_robust_mgmt_frame(rx->skb) &&
-		       rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP))) &&
-		     (rx->key || rx->sdata->drop_unencrypted)))
-		return -EACCES;
-	/* BIP does not use Protected field, so need to check MMIE */
-	if (unlikely(rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP) &&
-		     ieee80211_is_multicast_robust_mgmt_frame(rx->skb) &&
-		     ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
+		     ieee80211_is_data(fc) &&
 		     (rx->key || rx->sdata->drop_unencrypted)))
 		return -EACCES;
+	if (rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP)) {
+		if (unlikely(ieee80211_is_unicast_robust_mgmt_frame(rx->skb) &&
+			     rx->key))
+			return -EACCES;
+		/* BIP does not use Protected field, so need to check MMIE */
+		if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb)
+			     && ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
+			     rx->key))
+			return -EACCES;
+		/*
+		 * When using MFP, Action frames are not allowed prior to
+		 * having configured keys.
+		 */
+		if (unlikely(ieee80211_is_action(fc) && !rx->key &&
+			     ieee80211_is_robust_mgmt_frame(
+				     (struct ieee80211_hdr *) rx->skb->data)))
+			return -EACCES;
+	}
 
 	return 0;
 }
 
 static int
-ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
+__ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
 {
 	struct net_device *dev = rx->dev;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) rx->skb->data;
-	u16 hdrlen, ethertype;
-	u8 *payload;
-	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN] __aligned(2);
-	struct sk_buff *skb = rx->skb;
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
-		return -1;
-
-	hdrlen = ieee80211_hdrlen(hdr->frame_control);
-
-	/* convert IEEE 802.11 header + possible LLC headers into Ethernet
-	 * header
-	 * IEEE 802.11 address fields:
-	 * ToDS FromDS Addr1 Addr2 Addr3 Addr4
-	 *   0     0   DA    SA    BSSID n/a
-	 *   0     1   DA    BSSID SA    n/a
-	 *   1     0   BSSID SA    DA    n/a
-	 *   1     1   RA    TA    DA    SA
-	 */
-	memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
-	memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
-
-	switch (hdr->frame_control &
-		cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
-	case cpu_to_le16(IEEE80211_FCTL_TODS):
-		if (unlikely(sdata->vif.type != NL80211_IFTYPE_AP &&
-			     sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
-			return -1;
-		break;
-	case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
-		if (unlikely(sdata->vif.type != NL80211_IFTYPE_WDS &&
-			     sdata->vif.type != NL80211_IFTYPE_MESH_POINT))
-			return -1;
-		if (ieee80211_vif_is_mesh(&sdata->vif)) {
-			struct ieee80211s_hdr *meshdr = (struct ieee80211s_hdr *)
-				(skb->data + hdrlen);
-			hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
-			if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
-				memcpy(dst, meshdr->eaddr1, ETH_ALEN);
-				memcpy(src, meshdr->eaddr2, ETH_ALEN);
-			}
-		}
-		break;
-	case cpu_to_le16(IEEE80211_FCTL_FROMDS):
-		if (sdata->vif.type != NL80211_IFTYPE_STATION ||
-		    (is_multicast_ether_addr(dst) &&
-		     !compare_ether_addr(src, dev->dev_addr)))
-			return -1;
-		break;
-	case cpu_to_le16(0):
-		if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
-			return -1;
-		break;
-	}
-
-	if (unlikely(skb->len - hdrlen < 8))
-		return -1;
-
-	payload = skb->data + hdrlen;
-	ethertype = (payload[6] << 8) | payload[7];
-
-	if (likely((compare_ether_addr(payload, rfc1042_header) == 0 &&
-		    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
-		   compare_ether_addr(payload, bridge_tunnel_header) == 0)) {
-		/* remove RFC1042 or Bridge-Tunnel encapsulation and
-		 * replace EtherType */
-		skb_pull(skb, hdrlen + 6);
-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
-	} else {
-		struct ethhdr *ehdr;
-		__be16 len;
-
-		skb_pull(skb, hdrlen);
-		len = htons(skb->len);
-		ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
-		memcpy(ehdr->h_dest, dst, ETH_ALEN);
-		memcpy(ehdr->h_source, src, ETH_ALEN);
-		ehdr->h_proto = len;
-	}
-	return 0;
+	return ieee80211_data_to_8023(rx->skb, dev->dev_addr, sdata->vif.type);
 }
 
 /*
@@ -1397,7 +1328,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
 		 * mac80211. That also explains the __skb_push()
 		 * below.
 		 */
-		align = (unsigned long)skb->data & 3;
+		align = ((unsigned long)(skb->data + sizeof(struct ethhdr))) & 3;
 		if (align) {
 			if (WARN_ON(skb_headroom(skb) < 3)) {
 				dev_kfree_skb(skb);
@@ -1453,7 +1384,7 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
 	if (!(rx->flags & IEEE80211_RX_AMSDU))
 		return RX_CONTINUE;
 
-	err = ieee80211_data_to_8023(rx);
+	err = __ieee80211_data_to_8023(rx);
 	if (unlikely(err))
 		return RX_DROP_UNUSABLE;
 
@@ -1639,7 +1570,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 	if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
 		return RX_DROP_MONITOR;
 
-	err = ieee80211_data_to_8023(rx);
+	err = __ieee80211_data_to_8023(rx);
 	if (unlikely(err))
 		return RX_DROP_UNUSABLE;
 
@@ -1827,6 +1758,9 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 				   sizeof(mgmt->u.action.u.chan_switch)))
 				return RX_DROP_MONITOR;
 
+			if (sdata->vif.type != NL80211_IFTYPE_STATION)
+				return RX_DROP_MONITOR;
+
 			if (memcmp(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN))
 				return RX_DROP_MONITOR;
 
@@ -1837,7 +1771,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 			if (!bss)
 				return RX_DROP_MONITOR;
 
-			ieee80211_process_chanswitch(sdata,
+			ieee80211_sta_process_chanswitch(sdata,
 				     &mgmt->u.action.u.chan_switch.sw_elem, bss);
 			ieee80211_rx_bss_put(local, bss);
 			break;
@@ -1932,7 +1866,7 @@ static void ieee80211_rx_michael_mic_report(struct net_device *dev,
 	    !ieee80211_is_auth(hdr->frame_control))
 		goto ignore;
 
-	mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr);
+	mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr, NULL);
  ignore:
 	dev_kfree_skb(rx->skb);
 	rx->skb = NULL;
@@ -2287,6 +2221,43 @@ static inline u16 seq_sub(u16 sq1, u16 sq2)
 }
 
 
+static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
+					    struct tid_ampdu_rx *tid_agg_rx,
+					    int index)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_rate *rate;
+	struct ieee80211_rx_status status;
+
+	if (!tid_agg_rx->reorder_buf[index])
+		goto no_frame;
+
+	/* release the reordered frames to stack */
+	memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, sizeof(status));
+	sband = hw->wiphy->bands[status.band];
+	if (status.flag & RX_FLAG_HT)
+		rate = sband->bitrates; /* TODO: HT rates */
+	else
+		rate = &sband->bitrates[status.rate_idx];
+	__ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index],
+				     &status, rate);
+	tid_agg_rx->stored_mpdu_num--;
+	tid_agg_rx->reorder_buf[index] = NULL;
+
+no_frame:
+	tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+}
+
+
+/*
+ * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
+ * the skb was added to the buffer longer than this time ago, the earlier
+ * frames that have not yet been received are assumed to be lost and the skb
+ * can be released for processing. This may also release other skb's from the
+ * reorder buffer if there are no additional gaps between the frames.
+ */
+#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
+
 /*
  * As it function blongs to Rx path it must be called with
  * the proper rcu_read_lock protection for its flow.
@@ -2298,12 +2269,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 					   u16 mpdu_seq_num,
 					   int bar_req)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct ieee80211_rx_status status;
 	u16 head_seq_num, buf_size;
 	int index;
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_rate *rate;
 
 	buf_size = tid_agg_rx->buf_size;
 	head_seq_num = tid_agg_rx->head_seq_num;
@@ -2328,28 +2295,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 			index = seq_sub(tid_agg_rx->head_seq_num,
 				tid_agg_rx->ssn)
 				% tid_agg_rx->buf_size;
-
-			if (tid_agg_rx->reorder_buf[index]) {
-				/* release the reordered frames to stack */
-				memcpy(&status,
-					tid_agg_rx->reorder_buf[index]->cb,
-					sizeof(status));
-				sband = local->hw.wiphy->bands[status.band];
-				if (status.flag & RX_FLAG_HT) {
-					/* TODO: HT rates */
-					rate = sband->bitrates;
-				} else {
-					rate = &sband->bitrates
-						[status.rate_idx];
-				}
-				__ieee80211_rx_handle_packet(hw,
-					tid_agg_rx->reorder_buf[index],
-					&status, rate);
-				tid_agg_rx->stored_mpdu_num--;
-				tid_agg_rx->reorder_buf[index] = NULL;
-			}
-			tid_agg_rx->head_seq_num =
-				seq_inc(tid_agg_rx->head_seq_num);
+			ieee80211_release_reorder_frame(hw, tid_agg_rx,
+							index);
 		}
 		if (bar_req)
 			return 1;
@@ -2376,26 +2323,50 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 
 	/* put the frame in the reordering buffer */
 	tid_agg_rx->reorder_buf[index] = skb;
+	tid_agg_rx->reorder_time[index] = jiffies;
 	memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus,
 	       sizeof(*rxstatus));
 	tid_agg_rx->stored_mpdu_num++;
 	/* release the buffer until next missing frame */
 	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
 						% tid_agg_rx->buf_size;
-	while (tid_agg_rx->reorder_buf[index]) {
-		/* release the reordered frame back to stack */
-		memcpy(&status, tid_agg_rx->reorder_buf[index]->cb,
-			sizeof(status));
-		sband = local->hw.wiphy->bands[status.band];
-		if (status.flag & RX_FLAG_HT)
-			rate = sband->bitrates; /* TODO: HT rates */
-		else
-			rate = &sband->bitrates[status.rate_idx];
-		__ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index],
-					     &status, rate);
-		tid_agg_rx->stored_mpdu_num--;
-		tid_agg_rx->reorder_buf[index] = NULL;
-		tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+	if (!tid_agg_rx->reorder_buf[index] &&
+	    tid_agg_rx->stored_mpdu_num > 1) {
+		/*
+		 * No buffers ready to be released, but check whether any
+		 * frames in the reorder buffer have timed out.
+		 */
+		int j;
+		int skipped = 1;
+		for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
+		     j = (j + 1) % tid_agg_rx->buf_size) {
+			if (tid_agg_rx->reorder_buf[j] == NULL) {
+				skipped++;
+				continue;
+			}
+			if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
+					HZ / 10))
+				break;
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+			if (net_ratelimit())
+				printk(KERN_DEBUG "%s: release an RX reorder "
+				       "frame due to timeout on earlier "
+				       "frames\n",
+				       wiphy_name(hw->wiphy));
+#endif
+			ieee80211_release_reorder_frame(hw, tid_agg_rx, j);
+
+			/*
+			 * Increment the head seq# also for the skipped slots.
+			 */
+			tid_agg_rx->head_seq_num =
+				(tid_agg_rx->head_seq_num + skipped) &
+				SEQ_MASK;
+			skipped = 0;
+		}
+	} else while (tid_agg_rx->reorder_buf[index]) {
+		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
 		index =	seq_sub(tid_agg_rx->head_seq_num,
 			tid_agg_rx->ssn) % tid_agg_rx->buf_size;
 	}
@@ -2517,6 +2488,18 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
 		return;
 	}
 
+	/*
+	 * In theory, the block ack reordering should happen after duplicate
+	 * removal (ieee80211_rx_h_check(), which is an RX handler). As such,
+	 * the call to ieee80211_rx_reorder_ampdu() should really be moved to
+	 * happen as a new RX handler between ieee80211_rx_h_check and
+	 * ieee80211_rx_h_decrypt. This cleanup may eventually happen, but for
+	 * the time being, the call can be here since RX reorder buf processing
+	 * will implicitly skip duplicates. We could, in theory at least,
+	 * process frames that ieee80211_rx_h_passive_scan would drop (e.g.,
+	 * frames from other than operational channel), but that should not
+	 * happen in normal networks.
+	 */
 	if (!ieee80211_rx_reorder_ampdu(local, skb, status))
 		__ieee80211_rx_handle_packet(hw, skb, status, rate);
 
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 3bf9839f591..2a8d09ad17f 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -21,6 +21,7 @@
 #include <net/iw_handler.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "mesh.h"
 
 #define IEEE80211_PROBE_DELAY (HZ / 33)
@@ -202,18 +203,6 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
 	return RX_QUEUED;
 }
 
-void ieee80211_scan_failed(struct ieee80211_local *local)
-{
-	if (WARN_ON(!local->scan_req))
-		return;
-
-	/* notify cfg80211 about the failed scan */
-	if (local->scan_req != &local->int_scan_req)
-		cfg80211_scan_done(local->scan_req, true);
-
-	local->scan_req = NULL;
-}
-
 /*
  * inform AP that we will go to sleep so that it will buffer the frames
  * while we scan
@@ -253,7 +242,7 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 
-	if (!local->powersave)
+	if (!local->ps_sdata)
 		ieee80211_send_nullfunc(local, sdata, 0);
 	else {
 		/*
@@ -274,51 +263,62 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
 	}
 }
 
+static void ieee80211_restore_scan_ies(struct ieee80211_local *local)
+{
+	kfree(local->scan_req->ie);
+	local->scan_req->ie = local->orig_ies;
+	local->scan_req->ie_len = local->orig_ies_len;
+}
+
 void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct ieee80211_sub_if_data *sdata;
+	bool was_hw_scan;
 
-	if (WARN_ON(!local->hw_scanning && !local->sw_scanning))
+	mutex_lock(&local->scan_mtx);
+
+	if (WARN_ON(!local->hw_scanning && !local->sw_scanning)) {
+		mutex_unlock(&local->scan_mtx);
 		return;
+	}
 
-	if (WARN_ON(!local->scan_req))
+	if (WARN_ON(!local->scan_req)) {
+		mutex_unlock(&local->scan_mtx);
 		return;
+	}
+
+	if (local->hw_scanning)
+		ieee80211_restore_scan_ies(local);
 
 	if (local->scan_req != &local->int_scan_req)
 		cfg80211_scan_done(local->scan_req, aborted);
 	local->scan_req = NULL;
 
-	local->last_scan_completed = jiffies;
+	was_hw_scan = local->hw_scanning;
+	local->hw_scanning = false;
+	local->sw_scanning = false;
+	local->scan_channel = NULL;
 
-	if (local->hw_scanning) {
-		local->hw_scanning = false;
-		/*
-		 * Somebody might have requested channel change during scan
-		 * that we won't have acted upon, try now. ieee80211_hw_config
-		 * will set the flag based on actual changes.
-		 */
-		ieee80211_hw_config(local, 0);
-		goto done;
-	}
+	/* we only have to protect scan_req and hw/sw scan */
+	mutex_unlock(&local->scan_mtx);
 
-	local->sw_scanning = false;
 	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+	if (was_hw_scan)
+		goto done;
 
 	netif_tx_lock_bh(local->mdev);
 	netif_addr_lock(local->mdev);
 	local->filter_flags &= ~FIF_BCN_PRBRESP_PROMISC;
-	local->ops->configure_filter(local_to_hw(local),
-				     FIF_BCN_PRBRESP_PROMISC,
-				     &local->filter_flags,
-				     local->mdev->mc_count,
-				     local->mdev->mc_list);
+	drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
+			     &local->filter_flags,
+			     local->mdev->mc_count,
+			     local->mdev->mc_list);
 
 	netif_addr_unlock(local->mdev);
 	netif_tx_unlock_bh(local->mdev);
 
-	if (local->ops->sw_scan_complete)
-		local->ops->sw_scan_complete(local_to_hw(local));
+	drv_sw_scan_complete(local);
 
 	mutex_lock(&local->iflist_mtx);
 	list_for_each_entry(sdata, &local->interfaces, list) {
@@ -338,18 +338,160 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 		if (sdata->vif.type == NL80211_IFTYPE_AP ||
 		    sdata->vif.type == NL80211_IFTYPE_ADHOC ||
 		    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
-			ieee80211_if_config(sdata,
-					    IEEE80211_IFCC_BEACON_ENABLED);
+			ieee80211_bss_info_change_notify(
+				sdata, BSS_CHANGED_BEACON_ENABLED);
 	}
 	mutex_unlock(&local->iflist_mtx);
 
  done:
+	ieee80211_recalc_idle(local);
 	ieee80211_mlme_notify_scan_completed(local);
 	ieee80211_ibss_notify_scan_completed(local);
 	ieee80211_mesh_notify_scan_completed(local);
 }
 EXPORT_SYMBOL(ieee80211_scan_completed);
 
+static int ieee80211_start_sw_scan(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata;
+
+	/*
+	 * Hardware/driver doesn't support hw_scan, so use software
+	 * scanning instead. First send a nullfunc frame with power save
+	 * bit on so that AP will buffer the frames for us while we are not
+	 * listening, then send probe requests to each channel and wait for
+	 * the responses. After all channels are scanned, tune back to the
+	 * original channel and send a nullfunc frame with power save bit
+	 * off to trigger the AP to send us all the buffered frames.
+	 *
+	 * Note that while local->sw_scanning is true everything else but
+	 * nullfunc frames and probe requests will be dropped in
+	 * ieee80211_tx_h_check_assoc().
+	 */
+	drv_sw_scan_start(local);
+
+	mutex_lock(&local->iflist_mtx);
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!netif_running(sdata->dev))
+			continue;
+
+		/* disable beaconing */
+		if (sdata->vif.type == NL80211_IFTYPE_AP ||
+		    sdata->vif.type == NL80211_IFTYPE_ADHOC ||
+		    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+			ieee80211_bss_info_change_notify(
+				sdata, BSS_CHANGED_BEACON_ENABLED);
+
+		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+			if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
+				netif_tx_stop_all_queues(sdata->dev);
+				ieee80211_scan_ps_enable(sdata);
+			}
+		} else
+			netif_tx_stop_all_queues(sdata->dev);
+	}
+	mutex_unlock(&local->iflist_mtx);
+
+	local->scan_state = SCAN_SET_CHANNEL;
+	local->scan_channel_idx = 0;
+
+	netif_addr_lock_bh(local->mdev);
+	local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
+	drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
+			     &local->filter_flags,
+			     local->mdev->mc_count,
+			     local->mdev->mc_list);
+	netif_addr_unlock_bh(local->mdev);
+
+	/* TODO: start scan as soon as all nullfunc frames are ACKed */
+	queue_delayed_work(local->hw.workqueue, &local->scan_work,
+			   IEEE80211_CHANNEL_TIME);
+
+	return 0;
+}
+
+
+static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
+				  struct cfg80211_scan_request *req)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	int rc;
+
+	if (local->scan_req)
+		return -EBUSY;
+
+	if (local->ops->hw_scan) {
+		u8 *ies;
+		int ielen;
+
+		ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
+			      local->scan_ies_len + req->ie_len, GFP_KERNEL);
+		if (!ies)
+			return -ENOMEM;
+
+		ielen = ieee80211_build_preq_ies(local, ies,
+						 req->ie, req->ie_len);
+		local->orig_ies = req->ie;
+		local->orig_ies_len = req->ie_len;
+		req->ie = ies;
+		req->ie_len = ielen;
+	}
+
+	local->scan_req = req;
+	local->scan_sdata = sdata;
+
+	if (req != &local->int_scan_req &&
+	    sdata->vif.type == NL80211_IFTYPE_STATION &&
+	    (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE ||
+	     ifmgd->state == IEEE80211_STA_MLME_AUTHENTICATE ||
+	     ifmgd->state == IEEE80211_STA_MLME_ASSOCIATE)) {
+		/* actually wait for the assoc to finish/time out */
+		set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+		return 0;
+	}
+
+	if (local->ops->hw_scan)
+		local->hw_scanning = true;
+	else
+		local->sw_scanning = true;
+	/*
+	 * Kicking off the scan need not be protected,
+	 * only the scan variable stuff, since now
+	 * local->scan_req is assigned and other callers
+	 * will abort their scan attempts.
+	 *
+	 * This avoids getting a scan_mtx -> iflist_mtx
+	 * dependency, so that the scan completed calls
+	 * have more locking freedom.
+	 */
+
+	ieee80211_recalc_idle(local);
+	mutex_unlock(&local->scan_mtx);
+
+	if (local->ops->hw_scan)
+		rc = drv_hw_scan(local, local->scan_req);
+	else
+		rc = ieee80211_start_sw_scan(local);
+
+	mutex_lock(&local->scan_mtx);
+
+	if (rc) {
+		if (local->ops->hw_scan) {
+			local->hw_scanning = false;
+			ieee80211_restore_scan_ies(local);
+		} else
+			local->sw_scanning = false;
+
+		ieee80211_recalc_idle(local);
+
+		local->scan_req = NULL;
+		local->scan_sdata = NULL;
+	}
+
+	return rc;
+}
+
 void ieee80211_scan_work(struct work_struct *work)
 {
 	struct ieee80211_local *local =
@@ -359,17 +501,41 @@ void ieee80211_scan_work(struct work_struct *work)
 	int skip, i;
 	unsigned long next_delay = 0;
 
+	mutex_lock(&local->scan_mtx);
+	if (!sdata || !local->scan_req) {
+		mutex_unlock(&local->scan_mtx);
+		return;
+	}
+
+	if (local->scan_req && !(local->sw_scanning || local->hw_scanning)) {
+		struct cfg80211_scan_request *req = local->scan_req;
+		int rc;
+
+		local->scan_req = NULL;
+
+		rc = __ieee80211_start_scan(sdata, req);
+		mutex_unlock(&local->scan_mtx);
+
+		if (rc)
+			ieee80211_scan_completed(&local->hw, true);
+		return;
+	}
+
+	mutex_unlock(&local->scan_mtx);
+
 	/*
 	 * Avoid re-scheduling when the sdata is going away.
 	 */
-	if (!netif_running(sdata->dev))
+	if (!netif_running(sdata->dev)) {
+		ieee80211_scan_completed(&local->hw, true);
 		return;
+	}
 
 	switch (local->scan_state) {
 	case SCAN_SET_CHANNEL:
 		/* if no more bands/channels left, complete scan */
 		if (local->scan_channel_idx >= local->scan_req->n_channels) {
-			ieee80211_scan_completed(local_to_hw(local), false);
+			ieee80211_scan_completed(&local->hw, false);
 			return;
 		}
 		skip = 0;
@@ -393,24 +559,39 @@ void ieee80211_scan_work(struct work_struct *work)
 		if (skip)
 			break;
 
-		next_delay = IEEE80211_PROBE_DELAY +
-			     usecs_to_jiffies(local->hw.channel_change_time);
+		/*
+		 * Probe delay is used to update the NAV, cf. 11.1.3.2.2
+		 * (which unfortunately doesn't say _why_ step a) is done,
+		 * but it waits for the probe delay or until a frame is
+		 * received - and the received frame would update the NAV).
+		 * For now, we do not support waiting until a frame is
+		 * received.
+		 *
+		 * In any case, it is not necessary for a passive scan.
+		 */
+		if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
+		    !local->scan_req->n_ssids) {
+			next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
+			break;
+		}
+
+		next_delay = IEEE80211_PROBE_DELAY;
 		local->scan_state = SCAN_SEND_PROBE;
 		break;
 	case SCAN_SEND_PROBE:
-		next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
-		local->scan_state = SCAN_SET_CHANNEL;
-
-		if (local->scan_channel->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
-		    !local->scan_req->n_ssids)
-			break;
 		for (i = 0; i < local->scan_req->n_ssids; i++)
 			ieee80211_send_probe_req(
 				sdata, NULL,
 				local->scan_req->ssids[i].ssid,
 				local->scan_req->ssids[i].ssid_len,
 				local->scan_req->ie, local->scan_req->ie_len);
+
+		/*
+		 * After sending probe requests, wait for probe responses
+		 * on the channel.
+		 */
 		next_delay = IEEE80211_CHANNEL_TIME;
+		local->scan_state = SCAN_SET_CHANNEL;
 		break;
 	}
 
@@ -418,150 +599,53 @@ void ieee80211_scan_work(struct work_struct *work)
 			   next_delay);
 }
 
-
-int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata,
-			 struct cfg80211_scan_request *req)
+int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
+			   struct cfg80211_scan_request *req)
 {
-	struct ieee80211_local *local = scan_sdata->local;
-	struct ieee80211_sub_if_data *sdata;
-
-	if (!req)
-		return -EINVAL;
-
-	if (local->scan_req && local->scan_req != req)
-		return -EBUSY;
-
-	local->scan_req = req;
-
-	/* MLME-SCAN.request (page 118)  page 144 (11.1.3.1)
-	 * BSSType: INFRASTRUCTURE, INDEPENDENT, ANY_BSS
-	 * BSSID: MACAddress
-	 * SSID
-	 * ScanType: ACTIVE, PASSIVE
-	 * ProbeDelay: delay (in microseconds) to be used prior to transmitting
-	 *    a Probe frame during active scanning
-	 * ChannelList
-	 * MinChannelTime (>= ProbeDelay), in TU
-	 * MaxChannelTime: (>= MinChannelTime), in TU
-	 */
-
-	 /* MLME-SCAN.confirm
-	  * BSSDescriptionSet
-	  * ResultCode: SUCCESS, INVALID_PARAMETERS
-	 */
-
-	if (local->sw_scanning || local->hw_scanning) {
-		if (local->scan_sdata == scan_sdata)
-			return 0;
-		return -EBUSY;
-	}
-
-	if (local->ops->hw_scan) {
-		int rc;
-
-		local->hw_scanning = true;
-		rc = local->ops->hw_scan(local_to_hw(local), req);
-		if (rc) {
-			local->hw_scanning = false;
-			return rc;
-		}
-		local->scan_sdata = scan_sdata;
-		return 0;
-	}
-
-	/*
-	 * Hardware/driver doesn't support hw_scan, so use software
-	 * scanning instead. First send a nullfunc frame with power save
-	 * bit on so that AP will buffer the frames for us while we are not
-	 * listening, then send probe requests to each channel and wait for
-	 * the responses. After all channels are scanned, tune back to the
-	 * original channel and send a nullfunc frame with power save bit
-	 * off to trigger the AP to send us all the buffered frames.
-	 *
-	 * Note that while local->sw_scanning is true everything else but
-	 * nullfunc frames and probe requests will be dropped in
-	 * ieee80211_tx_h_check_assoc().
-	 */
-	local->sw_scanning = true;
-	if (local->ops->sw_scan_start)
-		local->ops->sw_scan_start(local_to_hw(local));
+	int res;
 
-	mutex_lock(&local->iflist_mtx);
-	list_for_each_entry(sdata, &local->interfaces, list) {
-		if (!netif_running(sdata->dev))
-			continue;
+	mutex_lock(&sdata->local->scan_mtx);
+	res = __ieee80211_start_scan(sdata, req);
+	mutex_unlock(&sdata->local->scan_mtx);
 
-		/* disable beaconing */
-		if (sdata->vif.type == NL80211_IFTYPE_AP ||
-		    sdata->vif.type == NL80211_IFTYPE_ADHOC ||
-		    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
-			ieee80211_if_config(sdata,
-					    IEEE80211_IFCC_BEACON_ENABLED);
+	return res;
+}
 
-		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
-			if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
-				netif_tx_stop_all_queues(sdata->dev);
-				ieee80211_scan_ps_enable(sdata);
-			}
-		} else
-			netif_tx_stop_all_queues(sdata->dev);
-	}
-	mutex_unlock(&local->iflist_mtx);
+int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
+				    const u8 *ssid, u8 ssid_len)
+{
+	struct ieee80211_local *local = sdata->local;
+	int ret = -EBUSY;
 
-	local->scan_state = SCAN_SET_CHANNEL;
-	local->scan_channel_idx = 0;
-	local->scan_sdata = scan_sdata;
-	local->scan_req = req;
+	mutex_lock(&local->scan_mtx);
 
-	netif_addr_lock_bh(local->mdev);
-	local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
-	local->ops->configure_filter(local_to_hw(local),
-				     FIF_BCN_PRBRESP_PROMISC,
-				     &local->filter_flags,
-				     local->mdev->mc_count,
-				     local->mdev->mc_list);
-	netif_addr_unlock_bh(local->mdev);
+	/* busy scanning */
+	if (local->scan_req)
+		goto unlock;
 
-	/* TODO: start scan as soon as all nullfunc frames are ACKed */
-	queue_delayed_work(local->hw.workqueue, &local->scan_work,
-			   IEEE80211_CHANNEL_TIME);
+	memcpy(local->int_scan_req.ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN);
+	local->int_scan_req.ssids[0].ssid_len = ssid_len;
 
-	return 0;
+	ret = __ieee80211_start_scan(sdata, &sdata->local->int_scan_req);
+ unlock:
+	mutex_unlock(&local->scan_mtx);
+	return ret;
 }
 
-
-int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
-			   struct cfg80211_scan_request *req)
+void ieee80211_scan_cancel(struct ieee80211_local *local)
 {
-	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_if_managed *ifmgd;
-
-	if (!req)
-		return -EINVAL;
+	bool swscan;
 
-	if (local->scan_req && local->scan_req != req)
-		return -EBUSY;
-
-	local->scan_req = req;
-
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
-		return ieee80211_start_scan(sdata, req);
+	cancel_delayed_work_sync(&local->scan_work);
 
 	/*
-	 * STA has a state machine that might need to defer scanning
-	 * while it's trying to associate/authenticate, therefore we
-	 * queue it up to the state machine in that case.
+	 * Only call this function when a scan can't be
+	 * queued -- mostly at suspend under RTNL.
 	 */
+	mutex_lock(&local->scan_mtx);
+	swscan = local->sw_scanning;
+	mutex_unlock(&local->scan_mtx);
 
-	if (local->sw_scanning || local->hw_scanning) {
-		if (local->scan_sdata == sdata)
-			return 0;
-		return -EBUSY;
-	}
-
-	ifmgd = &sdata->u.mgd;
-	set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
-	queue_work(local->hw.workqueue, &ifmgd->work);
-
-	return 0;
+	if (swscan)
+		ieee80211_scan_completed(&local->hw, true);
 }
diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c
index 5f7a2624ed7..68953033403 100644
--- a/net/mac80211/spectmgmt.c
+++ b/net/mac80211/spectmgmt.c
@@ -15,7 +15,7 @@
  */
 
 #include <linux/ieee80211.h>
-#include <net/wireless.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
 #include "sta_info.h"
@@ -84,104 +84,3 @@ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
 			mgmt->sa, mgmt->bssid,
 			mgmt->u.action.u.measurement.dialog_token);
 }
-
-void ieee80211_chswitch_work(struct work_struct *work)
-{
-	struct ieee80211_sub_if_data *sdata =
-		container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
-	struct ieee80211_bss *bss;
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
-	if (!netif_running(sdata->dev))
-		return;
-
-	bss = ieee80211_rx_bss_get(sdata->local, ifmgd->bssid,
-				   sdata->local->hw.conf.channel->center_freq,
-				   ifmgd->ssid, ifmgd->ssid_len);
-	if (!bss)
-		goto exit;
-
-	sdata->local->oper_channel = sdata->local->csa_channel;
-	/* XXX: shouldn't really modify cfg80211-owned data! */
-	if (!ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL))
-		bss->cbss.channel = sdata->local->oper_channel;
-
-	ieee80211_rx_bss_put(sdata->local, bss);
-exit:
-	ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
-	ieee80211_wake_queues_by_reason(&sdata->local->hw,
-					IEEE80211_QUEUE_STOP_REASON_CSA);
-}
-
-void ieee80211_chswitch_timer(unsigned long data)
-{
-	struct ieee80211_sub_if_data *sdata =
-		(struct ieee80211_sub_if_data *) data;
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
-	queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
-}
-
-void ieee80211_process_chanswitch(struct ieee80211_sub_if_data *sdata,
-				  struct ieee80211_channel_sw_ie *sw_elem,
-				  struct ieee80211_bss *bss)
-{
-	struct ieee80211_channel *new_ch;
-	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-	int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num);
-
-	/* FIXME: Handle ADHOC later */
-	if (sdata->vif.type != NL80211_IFTYPE_STATION)
-		return;
-
-	if (ifmgd->state != IEEE80211_STA_MLME_ASSOCIATED)
-		return;
-
-	if (sdata->local->sw_scanning || sdata->local->hw_scanning)
-		return;
-
-	/* Disregard subsequent beacons if we are already running a timer
-	   processing a CSA */
-
-	if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED)
-		return;
-
-	new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
-	if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED)
-		return;
-
-	sdata->local->csa_channel = new_ch;
-
-	if (sw_elem->count <= 1) {
-		queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
-	} else {
-		ieee80211_stop_queues_by_reason(&sdata->local->hw,
-						IEEE80211_QUEUE_STOP_REASON_CSA);
-		ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
-		mod_timer(&ifmgd->chswitch_timer,
-			  jiffies +
-			  msecs_to_jiffies(sw_elem->count *
-					   bss->cbss.beacon_interval));
-	}
-}
-
-void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
-				 u16 capab_info, u8 *pwr_constr_elem,
-				 u8 pwr_constr_elem_len)
-{
-	struct ieee80211_conf *conf = &sdata->local->hw.conf;
-
-	if (!(capab_info & WLAN_CAPABILITY_SPECTRUM_MGMT))
-		return;
-
-	/* Power constraint IE length should be 1 octet */
-	if (pwr_constr_elem_len != 1)
-		return;
-
-	if ((*pwr_constr_elem <= conf->channel->max_power) &&
-	    (*pwr_constr_elem != sdata->local->power_constr_level)) {
-		sdata->local->power_constr_level = *pwr_constr_elem;
-		ieee80211_hw_config(sdata->local, 0);
-	}
-}
-
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index c5f14e6bbde..a360bceeba5 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -19,6 +19,7 @@
 
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "sta_info.h"
 #include "debugfs_sta.h"
@@ -43,6 +44,15 @@
  * When the insertion fails (sta_info_insert()) returns non-zero), the
  * structure will have been freed by sta_info_insert()!
  *
+ * sta entries are added by mac80211 when you establish a link with a
+ * peer. This means different things for the different type of interfaces
+ * we support. For a regular station this mean we add the AP sta when we
+ * receive an assocation response from the AP. For IBSS this occurs when
+ * we receive a probe response or a beacon from target IBSS network. For
+ * WDS we add the sta for the peer imediately upon device open. When using
+ * AP mode we add stations for each respective station upon request from
+ * userspace through nl80211.
+ *
  * Because there are debugfs entries for each station, and adding those
  * must be able to sleep, it is also possible to "pin" a station entry,
  * that means it can be removed from the hash table but not be freed.
@@ -292,6 +302,9 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	skb_queue_head_init(&sta->ps_tx_buf);
 	skb_queue_head_init(&sta->tx_filtered);
 
+	for (i = 0; i < NUM_RX_DATA_QUEUES; i++)
+		sta->last_seq_ctrl[i] = cpu_to_le16(USHORT_MAX);
+
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 	printk(KERN_DEBUG "%s: Allocated STA %pM\n",
 	       wiphy_name(local->hw.wiphy), sta->sta.addr);
@@ -346,8 +359,7 @@ int sta_info_insert(struct sta_info *sta)
 					     struct ieee80211_sub_if_data,
 					     u.ap);
 
-		local->ops->sta_notify(local_to_hw(local), &sdata->vif,
-				       STA_NOTIFY_ADD, &sta->sta);
+		drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, &sta->sta);
 	}
 
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
@@ -405,8 +417,7 @@ static void __sta_info_set_tim_bit(struct ieee80211_if_ap *bss,
 
 	if (sta->local->ops->set_tim) {
 		sta->local->tim_in_locked_section = true;
-		sta->local->ops->set_tim(local_to_hw(sta->local),
-					 &sta->sta, true);
+		drv_set_tim(sta->local, &sta->sta, true);
 		sta->local->tim_in_locked_section = false;
 	}
 }
@@ -431,8 +442,7 @@ static void __sta_info_clear_tim_bit(struct ieee80211_if_ap *bss,
 
 	if (sta->local->ops->set_tim) {
 		sta->local->tim_in_locked_section = true;
-		sta->local->ops->set_tim(local_to_hw(sta->local),
-					 &sta->sta, false);
+		drv_set_tim(sta->local, &sta->sta, false);
 		sta->local->tim_in_locked_section = false;
 	}
 }
@@ -482,8 +492,8 @@ static void __sta_info_unlink(struct sta_info **sta)
 					     struct ieee80211_sub_if_data,
 					     u.ap);
 
-		local->ops->sta_notify(local_to_hw(local), &sdata->vif,
-				       STA_NOTIFY_REMOVE, &(*sta)->sta);
+		drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
+			       &(*sta)->sta);
 	}
 
 	if (ieee80211_vif_is_mesh(&sdata->vif)) {
@@ -543,9 +553,8 @@ void sta_info_unlink(struct sta_info **sta)
 	spin_unlock_irqrestore(&local->sta_lock, flags);
 }
 
-static inline int sta_info_buffer_expired(struct ieee80211_local *local,
-					  struct sta_info *sta,
-					  struct sk_buff *skb)
+static int sta_info_buffer_expired(struct sta_info *sta,
+				   struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *info;
 	int timeout;
@@ -556,8 +565,9 @@ static inline int sta_info_buffer_expired(struct ieee80211_local *local,
 	info = IEEE80211_SKB_CB(skb);
 
 	/* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */
-	timeout = (sta->listen_interval * local->hw.conf.beacon_int * 32 /
-		   15625) * HZ;
+	timeout = (sta->listen_interval *
+		   sta->sdata->vif.bss_conf.beacon_int *
+		   32 / 15625) * HZ;
 	if (timeout < STA_TX_BUFFER_EXPIRE)
 		timeout = STA_TX_BUFFER_EXPIRE;
 	return time_after(jiffies, info->control.jiffies + timeout);
@@ -577,7 +587,7 @@ static void sta_info_cleanup_expire_buffered(struct ieee80211_local *local,
 	for (;;) {
 		spin_lock_irqsave(&sta->ps_tx_buf.lock, flags);
 		skb = skb_peek(&sta->ps_tx_buf);
-		if (sta_info_buffer_expired(local, sta, skb))
+		if (sta_info_buffer_expired(sta, skb))
 			skb = __skb_dequeue(&sta->ps_tx_buf);
 		else
 			skb = NULL;
@@ -610,6 +620,9 @@ static void sta_info_cleanup(unsigned long data)
 		sta_info_cleanup_expire_buffered(local, sta);
 	rcu_read_unlock();
 
+	if (local->quiescing)
+		return;
+
 	local->sta_cleanup.expires =
 		round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL);
 	add_timer(&local->sta_cleanup);
@@ -686,41 +699,10 @@ static void sta_info_debugfs_add_work(struct work_struct *work)
 }
 #endif
 
-static void __ieee80211_run_pending_flush(struct ieee80211_local *local)
-{
-	struct sta_info *sta;
-	unsigned long flags;
-
-	ASSERT_RTNL();
-
-	spin_lock_irqsave(&local->sta_lock, flags);
-	while (!list_empty(&local->sta_flush_list)) {
-		sta = list_first_entry(&local->sta_flush_list,
-				       struct sta_info, list);
-		list_del(&sta->list);
-		spin_unlock_irqrestore(&local->sta_lock, flags);
-		sta_info_destroy(sta);
-		spin_lock_irqsave(&local->sta_lock, flags);
-	}
-	spin_unlock_irqrestore(&local->sta_lock, flags);
-}
-
-static void ieee80211_sta_flush_work(struct work_struct *work)
-{
-	struct ieee80211_local *local =
-		container_of(work, struct ieee80211_local, sta_flush_work);
-
-	rtnl_lock();
-	__ieee80211_run_pending_flush(local);
-	rtnl_unlock();
-}
-
 void sta_info_init(struct ieee80211_local *local)
 {
 	spin_lock_init(&local->sta_lock);
 	INIT_LIST_HEAD(&local->sta_list);
-	INIT_LIST_HEAD(&local->sta_flush_list);
-	INIT_WORK(&local->sta_flush_work, ieee80211_sta_flush_work);
 
 	setup_timer(&local->sta_cleanup, sta_info_cleanup,
 		    (unsigned long)local);
@@ -741,7 +723,6 @@ int sta_info_start(struct ieee80211_local *local)
 void sta_info_stop(struct ieee80211_local *local)
 {
 	del_timer(&local->sta_cleanup);
-	cancel_work_sync(&local->sta_flush_work);
 #ifdef CONFIG_MAC80211_DEBUGFS
 	/*
 	 * Make sure the debugfs adding work isn't pending after this
@@ -752,10 +733,7 @@ void sta_info_stop(struct ieee80211_local *local)
 	cancel_work_sync(&local->sta_debugfs_add);
 #endif
 
-	rtnl_lock();
 	sta_info_flush(local, NULL);
-	__ieee80211_run_pending_flush(local);
-	rtnl_unlock();
 }
 
 /**
@@ -767,7 +745,7 @@ void sta_info_stop(struct ieee80211_local *local)
  * @sdata: matching rule for the net device (sta->dev) or %NULL to match all STAs
  */
 int sta_info_flush(struct ieee80211_local *local,
-		    struct ieee80211_sub_if_data *sdata)
+		   struct ieee80211_sub_if_data *sdata)
 {
 	struct sta_info *sta, *tmp;
 	LIST_HEAD(tmp_list);
@@ -775,7 +753,6 @@ int sta_info_flush(struct ieee80211_local *local,
 	unsigned long flags;
 
 	might_sleep();
-	ASSERT_RTNL();
 
 	spin_lock_irqsave(&local->sta_lock, flags);
 	list_for_each_entry_safe(sta, tmp, &local->sta_list, list) {
@@ -795,39 +772,6 @@ int sta_info_flush(struct ieee80211_local *local,
 	return ret;
 }
 
-/**
- * sta_info_flush_delayed - flush matching STA entries from the STA table
- *
- * This function unlinks all stations for a given interface and queues
- * them for freeing. Note that the workqueue function scheduled here has
- * to run before any new keys can be added to the system to avoid set_key()
- * callback ordering issues.
- *
- * @sdata: the interface
- */
-void sta_info_flush_delayed(struct ieee80211_sub_if_data *sdata)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct sta_info *sta, *tmp;
-	unsigned long flags;
-	bool work = false;
-
-	spin_lock_irqsave(&local->sta_lock, flags);
-	list_for_each_entry_safe(sta, tmp, &local->sta_list, list) {
-		if (sdata == sta->sdata) {
-			__sta_info_unlink(&sta);
-			if (sta) {
-				list_add_tail(&sta->list,
-					      &local->sta_flush_list);
-				work = true;
-			}
-		}
-	}
-	if (work)
-		schedule_work(&local->sta_flush_work);
-	spin_unlock_irqrestore(&local->sta_lock, flags);
-}
-
 void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 			  unsigned long exp_time)
 {
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 5534d489f50..49a1a1f7651 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -88,6 +88,7 @@ struct tid_ampdu_tx {
  * struct tid_ampdu_rx - TID aggregation information (Rx).
  *
  * @reorder_buf: buffer to reorder incoming aggregated MPDUs
+ * @reorder_time: jiffies when skb was added
  * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
  * @head_seq_num: head sequence number in reordering buffer.
  * @stored_mpdu_num: number of MPDUs in reordering buffer
@@ -99,6 +100,7 @@ struct tid_ampdu_tx {
  */
 struct tid_ampdu_rx {
 	struct sk_buff **reorder_buf;
+	unsigned long *reorder_time;
 	struct timer_list session_timer;
 	u16 head_seq_num;
 	u16 stored_mpdu_num;
@@ -214,6 +216,7 @@ struct sta_ampdu_mlme {
  * @plink_state: peer link state
  * @plink_timeout: timeout of peer link
  * @plink_timer: peer link watch timer
+ * @plink_timer_was_running: used by suspend/resume to restore timers
  * @debugfs: debug filesystem info
  * @sta: station information we share with the driver
  */
@@ -291,6 +294,7 @@ struct sta_info {
 	__le16 reason;
 	u8 plink_retries;
 	bool ignore_plink_timer;
+	bool plink_timer_was_running;
 	enum plink_state plink_state;
 	u32 plink_timeout;
 	struct timer_list plink_timer;
@@ -442,8 +446,7 @@ void sta_info_init(struct ieee80211_local *local);
 int sta_info_start(struct ieee80211_local *local);
 void sta_info_stop(struct ieee80211_local *local);
 int sta_info_flush(struct ieee80211_local *local,
-		    struct ieee80211_sub_if_data *sdata);
-void sta_info_flush_delayed(struct ieee80211_sub_if_data *sdata);
+		   struct ieee80211_sub_if_data *sdata);
 void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 			  unsigned long exp_time);
 
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index 38fa111d2dc..964b7faa7f1 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -13,6 +13,7 @@
 #include <asm/unaligned.h>
 
 #include <net/mac80211.h>
+#include "driver-ops.h"
 #include "key.h"
 #include "tkip.h"
 #include "wep.h"
@@ -307,9 +308,8 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm,
 			if (is_multicast_ether_addr(ra))
 				sta_addr = bcast;
 
-			key->local->ops->update_tkip_key(
-				local_to_hw(key->local), &key->conf,
-				sta_addr, iv32, key->u.tkip.rx[queue].p1k);
+			drv_update_tkip_key(key->local, &key->conf, sta_addr,
+					    iv32, key->u.tkip.rx[queue].p1k);
 		}
 	}
 
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 63656266d56..d238a8939a0 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -25,6 +25,7 @@
 #include <asm/unaligned.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "led.h"
 #include "mesh.h"
 #include "wep.h"
@@ -399,6 +400,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 			sta_info_set_tim_bit(sta);
 
 		info->control.jiffies = jiffies;
+		info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
 		skb_queue_tail(&sta->ps_tx_buf, tx->skb);
 		return TX_QUEUED;
 	}
@@ -409,8 +411,24 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 		       sta->sta.addr);
 	}
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
-	clear_sta_flags(sta, WLAN_STA_PSPOLL);
+	if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL)) {
+		/*
+		 * The sleeping station with pending data is now snoozing.
+		 * It queried us for its buffered frames and will go back
+		 * to deep sleep once it got everything.
+		 *
+		 * inform the driver, in case the hardware does powersave
+		 * frame filtering and keeps a station  blacklist on its own
+		 * (e.g: p54), so that frames can be delivered unimpeded.
+		 *
+		 * Note: It should be safe to disable the filter now.
+		 * As, it is really unlikely that we still have any pending
+		 * frame for this station in the hw's buffers/fifos left,
+		 * that is not rejected with a unsuccessful tx_status yet.
+		 */
 
+		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+	}
 	return TX_CONTINUE;
 }
 
@@ -429,7 +447,7 @@ ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx)
 static ieee80211_tx_result debug_noinline
 ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 {
-	struct ieee80211_key *key;
+	struct ieee80211_key *key = NULL;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
 
@@ -500,7 +518,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 	sband = tx->local->hw.wiphy->bands[tx->channel->band];
 
 	len = min_t(int, tx->skb->len + FCS_LEN,
-			 tx->local->fragmentation_threshold);
+			 tx->local->hw.wiphy->frag_threshold);
 
 	/* set up the tx rate control struct we give the RC algo */
 	txrc.hw = local_to_hw(tx->local);
@@ -511,8 +529,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 	txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx;
 
 	/* set up RTS protection if desired */
-	if (tx->local->rts_threshold < IEEE80211_MAX_RTS_THRESHOLD &&
-	    len > tx->local->rts_threshold) {
+	if (len > tx->local->hw.wiphy->rts_threshold) {
 		txrc.rts = rts = true;
 	}
 
@@ -542,6 +559,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 	if (unlikely(!info->control.rates[0].count))
 		info->control.rates[0].count = 1;
 
+	if (WARN_ON_ONCE((info->control.rates[0].count > 1) &&
+			 (info->flags & IEEE80211_TX_CTL_NO_ACK)))
+		info->control.rates[0].count = 1;
+
 	if (is_multicast_ether_addr(hdr->addr1)) {
 		/*
 		 * XXX: verify the rate is in the basic rateset
@@ -754,7 +775,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
 	struct sk_buff *skb = tx->skb;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (void *)skb->data;
-	int frag_threshold = tx->local->fragmentation_threshold;
+	int frag_threshold = tx->local->hw.wiphy->frag_threshold;
 	int hdrlen;
 	int fragnum;
 
@@ -852,6 +873,8 @@ ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx)
 
 	do {
 		hdr = (void *) skb->data;
+		if (unlikely(ieee80211_is_pspoll(hdr->frame_control)))
+			break; /* must not overwrite AID */
 		next_len = skb->next ? skb->next->len : 0;
 		group_addr = is_multicast_ether_addr(hdr->addr1);
 
@@ -885,9 +908,8 @@ ieee80211_tx_h_stats(struct ieee80211_tx_data *tx)
  * deal with packet injection down monitor interface
  * with Radiotap Header -- only called for monitor mode interface
  */
-static ieee80211_tx_result
-__ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
-			      struct sk_buff *skb)
+static bool __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
+					  struct sk_buff *skb)
 {
 	/*
 	 * this is the moment to interpret and discard the radiotap header that
@@ -938,7 +960,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 				 * on transmission
 				 */
 				if (skb->len < (iterator.max_length + FCS_LEN))
-					return TX_DROP;
+					return false;
 
 				skb_trim(skb, skb->len - FCS_LEN);
 			}
@@ -960,7 +982,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 	}
 
 	if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */
-		return TX_DROP;
+		return false;
 
 	/*
 	 * remove the radiotap header
@@ -969,7 +991,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 	 */
 	skb_pull(skb, iterator.max_length);
 
-	return TX_CONTINUE;
+	return true;
 }
 
 /*
@@ -1003,7 +1025,7 @@ __ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 	/* process and remove the injection radiotap header */
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) {
-		if (__ieee80211_parse_tx_radiotap(tx, skb) == TX_DROP)
+		if (!__ieee80211_parse_tx_radiotap(tx, skb))
 			return TX_DROP;
 
 		/*
@@ -1067,12 +1089,15 @@ __ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 		info->flags |= IEEE80211_TX_CTL_NO_ACK;
 	} else {
 		tx->flags |= IEEE80211_TX_UNICAST;
-		info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
+		if (unlikely(local->wifi_wme_noack_test))
+			info->flags |= IEEE80211_TX_CTL_NO_ACK;
+		else
+			info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
 	}
 
 	if (tx->flags & IEEE80211_TX_FRAGMENTED) {
 		if ((tx->flags & IEEE80211_TX_UNICAST) &&
-		    skb->len + FCS_LEN > local->fragmentation_threshold &&
+		    skb->len + FCS_LEN > local->hw.wiphy->frag_threshold &&
 		    !(info->flags & IEEE80211_TX_CTL_AMPDU))
 			tx->flags |= IEEE80211_TX_FRAGMENTED;
 		else
@@ -1147,7 +1172,7 @@ static int __ieee80211_tx(struct ieee80211_local *local,
 
 		next = skb->next;
 		len = skb->len;
-		ret = local->ops->tx(local_to_hw(local), skb);
+		ret = drv_tx(local, skb);
 		if (WARN_ON(ret != NETDEV_TX_OK && skb->len != len)) {
 			dev_kfree_skb(skb);
 			ret = NETDEV_TX_OK;
@@ -1213,7 +1238,6 @@ static void ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
 			 bool txpending)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct sta_info *sta;
 	struct ieee80211_tx_data tx;
 	ieee80211_tx_result res_prepare;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -1245,7 +1269,6 @@ static void ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
 		return;
 	}
 
-	sta = tx.sta;
 	tx.channel = local->hw.conf.channel;
 	info->band = tx.channel->band;
 
@@ -1392,7 +1415,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
-	    local->hw.conf.dynamic_ps_timeout > 0) {
+	    local->hw.conf.dynamic_ps_timeout > 0 &&
+	    !local->sw_scanning && !local->hw_scanning && local->ps_sdata) {
 		if (local->hw.conf.flags & IEEE80211_CONF_PS) {
 			ieee80211_stop_queues_by_reason(&local->hw,
 					IEEE80211_QUEUE_STOP_REASON_PS);
@@ -1591,7 +1615,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = sdata->local;
-	int ret = 1, head_need;
+	int ret = NETDEV_TX_BUSY, head_need;
 	u16 ethertype, hdrlen,  meshhdrlen = 0;
 	__le16 fc;
 	struct ieee80211_hdr hdr;
@@ -2086,18 +2110,18 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
 		struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
 		struct ieee80211_hdr *hdr;
+		struct sk_buff *presp = rcu_dereference(ifibss->presp);
 
-		if (!ifibss->probe_resp)
+		if (!presp)
 			goto out;
 
-		skb = skb_copy(ifibss->probe_resp, GFP_ATOMIC);
+		skb = skb_copy(presp, GFP_ATOMIC);
 		if (!skb)
 			goto out;
 
 		hdr = (struct ieee80211_hdr *) skb->data;
 		hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 						 IEEE80211_STYPE_BEACON);
-
 	} else if (ieee80211_vif_is_mesh(&sdata->vif)) {
 		struct ieee80211_mgmt *mgmt;
 		u8 *pos;
@@ -2117,7 +2141,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 		memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 		/* BSSID is left zeroed, wildcard value */
 		mgmt->u.beacon.beacon_int =
-			cpu_to_le16(local->hw.conf.beacon_int);
+			cpu_to_le16(sdata->vif.bss_conf.beacon_int);
 		mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
 
 		pos = skb_put(skb, 2);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index fdf432f1455..66ce96a69f3 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -20,27 +20,21 @@
 #include <linux/if_arp.h>
 #include <linux/wireless.h>
 #include <linux/bitmap.h>
+#include <linux/crc32.h>
 #include <net/net_namespace.h>
 #include <net/cfg80211.h>
 #include <net/rtnetlink.h>
 
 #include "ieee80211_i.h"
+#include "driver-ops.h"
 #include "rate.h"
 #include "mesh.h"
 #include "wme.h"
+#include "led.h"
 
 /* privid for wiphys to determine whether they belong to us or not */
 void *mac80211_wiphy_privid = &mac80211_wiphy_privid;
 
-/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
-/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-const unsigned char rfc1042_header[] __aligned(2) =
-	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
-
-/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-const unsigned char bridge_tunnel_header[] __aligned(2) =
-	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
-
 struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy)
 {
 	struct ieee80211_local *local;
@@ -100,70 +94,6 @@ u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
 	return NULL;
 }
 
-unsigned int ieee80211_hdrlen(__le16 fc)
-{
-	unsigned int hdrlen = 24;
-
-	if (ieee80211_is_data(fc)) {
-		if (ieee80211_has_a4(fc))
-			hdrlen = 30;
-		if (ieee80211_is_data_qos(fc))
-			hdrlen += IEEE80211_QOS_CTL_LEN;
-		goto out;
-	}
-
-	if (ieee80211_is_ctl(fc)) {
-		/*
-		 * ACK and CTS are 10 bytes, all others 16. To see how
-		 * to get this condition consider
-		 *   subtype mask:   0b0000000011110000 (0x00F0)
-		 *   ACK subtype:    0b0000000011010000 (0x00D0)
-		 *   CTS subtype:    0b0000000011000000 (0x00C0)
-		 *   bits that matter:         ^^^      (0x00E0)
-		 *   value of those: 0b0000000011000000 (0x00C0)
-		 */
-		if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0))
-			hdrlen = 10;
-		else
-			hdrlen = 16;
-	}
-out:
-	return hdrlen;
-}
-EXPORT_SYMBOL(ieee80211_hdrlen);
-
-unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb)
-{
-	const struct ieee80211_hdr *hdr = (const struct ieee80211_hdr *)skb->data;
-	unsigned int hdrlen;
-
-	if (unlikely(skb->len < 10))
-		return 0;
-	hdrlen = ieee80211_hdrlen(hdr->frame_control);
-	if (unlikely(hdrlen > skb->len))
-		return 0;
-	return hdrlen;
-}
-EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
-
-int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
-{
-	int ae = meshhdr->flags & IEEE80211S_FLAGS_AE;
-	/* 7.1.3.5a.2 */
-	switch (ae) {
-	case 0:
-		return 6;
-	case 1:
-		return 12;
-	case 2:
-		return 18;
-	case 3:
-		return 24;
-	default:
-		return 6;
-	}
-}
-
 void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx)
 {
 	struct sk_buff *skb = tx->skb;
@@ -411,6 +341,52 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue)
 }
 EXPORT_SYMBOL(ieee80211_stop_queue);
 
+void ieee80211_add_pending_skb(struct ieee80211_local *local,
+			       struct sk_buff *skb)
+{
+	struct ieee80211_hw *hw = &local->hw;
+	unsigned long flags;
+	int queue = skb_get_queue_mapping(skb);
+
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	__ieee80211_stop_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+	__ieee80211_stop_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_PENDING);
+	skb_queue_tail(&local->pending[queue], skb);
+	__ieee80211_wake_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+}
+
+int ieee80211_add_pending_skbs(struct ieee80211_local *local,
+			       struct sk_buff_head *skbs)
+{
+	struct ieee80211_hw *hw = &local->hw;
+	struct sk_buff *skb;
+	unsigned long flags;
+	int queue, ret = 0, i;
+
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	for (i = 0; i < hw->queues; i++)
+		__ieee80211_stop_queue(hw, i,
+			IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+
+	while ((skb = skb_dequeue(skbs))) {
+		ret++;
+		queue = skb_get_queue_mapping(skb);
+		skb_queue_tail(&local->pending[queue], skb);
+	}
+
+	for (i = 0; i < hw->queues; i++) {
+		if (ret)
+			__ieee80211_stop_queue(hw, i,
+				IEEE80211_QUEUE_STOP_REASON_PENDING);
+		__ieee80211_wake_queue(hw, i,
+			IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
+	}
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
+	return ret;
+}
+
 void ieee80211_stop_queues_by_reason(struct ieee80211_hw *hw,
 				    enum queue_stop_reason reason)
 {
@@ -536,8 +512,16 @@ EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
 void ieee802_11_parse_elems(u8 *start, size_t len,
 			    struct ieee802_11_elems *elems)
 {
+	ieee802_11_parse_elems_crc(start, len, elems, 0, 0);
+}
+
+u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
+			       struct ieee802_11_elems *elems,
+			       u64 filter, u32 crc)
+{
 	size_t left = len;
 	u8 *pos = start;
+	bool calc_crc = filter != 0;
 
 	memset(elems, 0, sizeof(*elems));
 	elems->ie_start = start;
@@ -551,7 +535,10 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 		left -= 2;
 
 		if (elen > left)
-			return;
+			break;
+
+		if (calc_crc && id < 64 && (filter & BIT(id)))
+			crc = crc32_be(crc, pos - 2, elen + 2);
 
 		switch (id) {
 		case WLAN_EID_SSID:
@@ -575,8 +562,10 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 			elems->cf_params_len = elen;
 			break;
 		case WLAN_EID_TIM:
-			elems->tim = pos;
-			elems->tim_len = elen;
+			if (elen >= sizeof(struct ieee80211_tim_ie)) {
+				elems->tim = (void *)pos;
+				elems->tim_len = elen;
+			}
 			break;
 		case WLAN_EID_IBSS_PARAMS:
 			elems->ibss_params = pos;
@@ -586,15 +575,20 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 			elems->challenge = pos;
 			elems->challenge_len = elen;
 			break;
-		case WLAN_EID_WPA:
+		case WLAN_EID_VENDOR_SPECIFIC:
 			if (elen >= 4 && pos[0] == 0x00 && pos[1] == 0x50 &&
 			    pos[2] == 0xf2) {
 				/* Microsoft OUI (00:50:F2) */
+
+				if (calc_crc)
+					crc = crc32_be(crc, pos - 2, elen + 2);
+
 				if (pos[3] == 1) {
 					/* OUI Type 1 - WPA IE */
 					elems->wpa = pos;
 					elems->wpa_len = elen;
 				} else if (elen >= 5 && pos[3] == 2) {
+					/* OUI Type 2 - WMM IE */
 					if (pos[4] == 0) {
 						elems->wmm_info = pos;
 						elems->wmm_info_len = elen;
@@ -679,32 +673,70 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
 		left -= elen;
 		pos += elen;
 	}
+
+	return crc;
 }
 
 void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_tx_queue_params qparam;
-	int i;
+	int queue;
+	bool use_11b;
+	int aCWmin, aCWmax;
 
 	if (!local->ops->conf_tx)
 		return;
 
 	memset(&qparam, 0, sizeof(qparam));
 
-	qparam.aifs = 2;
+	use_11b = (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ) &&
+		 !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE);
 
-	if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
-	    !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE))
-		qparam.cw_min = 31;
-	else
-		qparam.cw_min = 15;
-
-	qparam.cw_max = 1023;
-	qparam.txop = 0;
+	for (queue = 0; queue < local_to_hw(local)->queues; queue++) {
+		/* Set defaults according to 802.11-2007 Table 7-37 */
+		aCWmax = 1023;
+		if (use_11b)
+			aCWmin = 31;
+		else
+			aCWmin = 15;
+
+		switch (queue) {
+		case 3: /* AC_BK */
+			qparam.cw_max = aCWmax;
+			qparam.cw_min = aCWmin;
+			qparam.txop = 0;
+			qparam.aifs = 7;
+			break;
+		default: /* never happens but let's not leave undefined */
+		case 2: /* AC_BE */
+			qparam.cw_max = aCWmax;
+			qparam.cw_min = aCWmin;
+			qparam.txop = 0;
+			qparam.aifs = 3;
+			break;
+		case 1: /* AC_VI */
+			qparam.cw_max = aCWmin;
+			qparam.cw_min = (aCWmin + 1) / 2 - 1;
+			if (use_11b)
+				qparam.txop = 6016/32;
+			else
+				qparam.txop = 3008/32;
+			qparam.aifs = 2;
+			break;
+		case 0: /* AC_VO */
+			qparam.cw_max = (aCWmin + 1) / 2 - 1;
+			qparam.cw_min = (aCWmin + 1) / 4 - 1;
+			if (use_11b)
+				qparam.txop = 3264/32;
+			else
+				qparam.txop = 1504/32;
+			qparam.aifs = 2;
+			break;
+		}
 
-	for (i = 0; i < local_to_hw(local)->queues; i++)
-		local->ops->conf_tx(local_to_hw(local), i, &qparam);
+		drv_conf_tx(local, queue, &qparam);
+	}
 }
 
 void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
@@ -831,16 +863,73 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
 	ieee80211_tx_skb(sdata, skb, encrypt);
 }
 
+int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
+			     const u8 *ie, size_t ie_len)
+{
+	struct ieee80211_supported_band *sband;
+	u8 *pos, *supp_rates_len, *esupp_rates_len = NULL;
+	int i;
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+	pos = buffer;
+
+	*pos++ = WLAN_EID_SUPP_RATES;
+	supp_rates_len = pos;
+	*pos++ = 0;
+
+	for (i = 0; i < sband->n_bitrates; i++) {
+		struct ieee80211_rate *rate = &sband->bitrates[i];
+
+		if (esupp_rates_len) {
+			*esupp_rates_len += 1;
+		} else if (*supp_rates_len == 8) {
+			*pos++ = WLAN_EID_EXT_SUPP_RATES;
+			esupp_rates_len = pos;
+			*pos++ = 1;
+		} else
+			*supp_rates_len += 1;
+
+		*pos++ = rate->bitrate / 5;
+	}
+
+	if (sband->ht_cap.ht_supported) {
+		__le16 tmp = cpu_to_le16(sband->ht_cap.cap);
+
+		*pos++ = WLAN_EID_HT_CAPABILITY;
+		*pos++ = sizeof(struct ieee80211_ht_cap);
+		memset(pos, 0, sizeof(struct ieee80211_ht_cap));
+		memcpy(pos, &tmp, sizeof(u16));
+		pos += sizeof(u16);
+		/* TODO: needs a define here for << 2 */
+		*pos++ = sband->ht_cap.ampdu_factor |
+			 (sband->ht_cap.ampdu_density << 2);
+		memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
+		pos += sizeof(sband->ht_cap.mcs);
+		pos += 2 + 4 + 1; /* ext info, BF cap, antsel */
+	}
+
+	/*
+	 * If adding more here, adjust code in main.c
+	 * that calculates local->scan_ies_len.
+	 */
+
+	if (ie) {
+		memcpy(pos, ie, ie_len);
+		pos += ie_len;
+	}
+
+	return pos - buffer;
+}
+
 void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
-			      u8 *ssid, size_t ssid_len,
-			      u8 *ie, size_t ie_len)
+			      const u8 *ssid, size_t ssid_len,
+			      const u8 *ie, size_t ie_len)
 {
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_supported_band *sband;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
-	u8 *pos, *supp_rates, *esupp_rates = NULL;
-	int i;
+	u8 *pos;
 
 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt) + 200 +
 			    ie_len);
@@ -867,31 +956,9 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
 	*pos++ = WLAN_EID_SSID;
 	*pos++ = ssid_len;
 	memcpy(pos, ssid, ssid_len);
+	pos += ssid_len;
 
-	supp_rates = skb_put(skb, 2);
-	supp_rates[0] = WLAN_EID_SUPP_RATES;
-	supp_rates[1] = 0;
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
-	for (i = 0; i < sband->n_bitrates; i++) {
-		struct ieee80211_rate *rate = &sband->bitrates[i];
-		if (esupp_rates) {
-			pos = skb_put(skb, 1);
-			esupp_rates[1]++;
-		} else if (supp_rates[1] == 8) {
-			esupp_rates = skb_put(skb, 3);
-			esupp_rates[0] = WLAN_EID_EXT_SUPP_RATES;
-			esupp_rates[1] = 1;
-			pos = &esupp_rates[2];
-		} else {
-			pos = skb_put(skb, 1);
-			supp_rates[1]++;
-		}
-		*pos = rate->bitrate / 5;
-	}
-
-	if (ie)
-		memcpy(skb_put(skb, ie_len), ie, ie_len);
+	skb_put(skb, ieee80211_build_preq_ies(local, pos, ie, ie_len));
 
 	ieee80211_tx_skb(sdata, skb, 0);
 }
@@ -931,3 +998,151 @@ u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
 	}
 	return supp_rates;
 }
+
+int ieee80211_reconfig(struct ieee80211_local *local)
+{
+	struct ieee80211_hw *hw = &local->hw;
+	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_if_init_conf conf;
+	struct sta_info *sta;
+	unsigned long flags;
+	int res;
+	bool from_suspend = local->suspended;
+
+	/*
+	 * We're going to start the hardware, at that point
+	 * we are no longer suspended and can RX frames.
+	 */
+	local->suspended = false;
+
+	/* restart hardware */
+	if (local->open_count) {
+		res = drv_start(local);
+
+		ieee80211_led_radio(local, true);
+	}
+
+	/* add interfaces */
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+		    sdata->vif.type != NL80211_IFTYPE_MONITOR &&
+		    netif_running(sdata->dev)) {
+			conf.vif = &sdata->vif;
+			conf.type = sdata->vif.type;
+			conf.mac_addr = sdata->dev->dev_addr;
+			res = drv_add_interface(local, &conf);
+		}
+	}
+
+	/* add STAs back */
+	if (local->ops->sta_notify) {
+		spin_lock_irqsave(&local->sta_lock, flags);
+		list_for_each_entry(sta, &local->sta_list, list) {
+			sdata = sta->sdata;
+			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+				sdata = container_of(sdata->bss,
+					     struct ieee80211_sub_if_data,
+					     u.ap);
+
+			drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD,
+				       &sta->sta);
+		}
+		spin_unlock_irqrestore(&local->sta_lock, flags);
+	}
+
+	/* Clear Suspend state so that ADDBA requests can be processed */
+
+	rcu_read_lock();
+
+	if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
+		list_for_each_entry_rcu(sta, &local->sta_list, list) {
+			clear_sta_flags(sta, WLAN_STA_SUSPEND);
+		}
+	}
+
+	rcu_read_unlock();
+
+	/* setup RTS threshold */
+	drv_set_rts_threshold(local, hw->wiphy->rts_threshold);
+
+	/* reconfigure hardware */
+	ieee80211_hw_config(local, ~0);
+
+	netif_addr_lock_bh(local->mdev);
+	ieee80211_configure_filter(local);
+	netif_addr_unlock_bh(local->mdev);
+
+	/* Finally also reconfigure all the BSS information */
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		u32 changed = ~0;
+		if (!netif_running(sdata->dev))
+			continue;
+		switch (sdata->vif.type) {
+		case NL80211_IFTYPE_STATION:
+			/* disable beacon change bits */
+			changed &= ~(BSS_CHANGED_BEACON |
+				     BSS_CHANGED_BEACON_ENABLED);
+			/* fall through */
+		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_MESH_POINT:
+			ieee80211_bss_info_change_notify(sdata, changed);
+			break;
+		case NL80211_IFTYPE_WDS:
+			break;
+		case NL80211_IFTYPE_AP_VLAN:
+		case NL80211_IFTYPE_MONITOR:
+			/* ignore virtual */
+			break;
+		case NL80211_IFTYPE_UNSPECIFIED:
+		case __NL80211_IFTYPE_AFTER_LAST:
+			WARN_ON(1);
+			break;
+		}
+	}
+
+	/* add back keys */
+	list_for_each_entry(sdata, &local->interfaces, list)
+		if (netif_running(sdata->dev))
+			ieee80211_enable_keys(sdata);
+
+	ieee80211_wake_queues_by_reason(hw,
+			IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+
+	/*
+	 * If this is for hw restart things are still running.
+	 * We may want to change that later, however.
+	 */
+	if (!from_suspend)
+		return 0;
+
+#ifdef CONFIG_PM
+	local->suspended = false;
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		switch(sdata->vif.type) {
+		case NL80211_IFTYPE_STATION:
+			ieee80211_sta_restart(sdata);
+			break;
+		case NL80211_IFTYPE_ADHOC:
+			ieee80211_ibss_restart(sdata);
+			break;
+		case NL80211_IFTYPE_MESH_POINT:
+			ieee80211_mesh_restart(sdata);
+			break;
+		default:
+			break;
+		}
+	}
+
+	add_timer(&local->sta_cleanup);
+
+	spin_lock_irqsave(&local->sta_lock, flags);
+	list_for_each_entry(sta, &local->sta_list, list)
+		mesh_plink_restart(sta);
+	spin_unlock_irqrestore(&local->sta_lock, flags);
+#else
+	WARN_ON(1);
+#endif
+	return 0;
+}
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 959aa8379cc..d2d81b10334 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -27,100 +27,6 @@
 #include "aes_ccm.h"
 
 
-static int ieee80211_set_encryption(struct ieee80211_sub_if_data *sdata, u8 *sta_addr,
-				    int idx, int alg, int remove,
-				    int set_tx_key, const u8 *_key,
-				    size_t key_len)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct sta_info *sta;
-	struct ieee80211_key *key;
-	int err;
-
-	if (alg == ALG_AES_CMAC) {
-		if (idx < NUM_DEFAULT_KEYS ||
-		    idx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) {
-			printk(KERN_DEBUG "%s: set_encrypt - invalid idx=%d "
-			       "(BIP)\n", sdata->dev->name, idx);
-			return -EINVAL;
-		}
-	} else if (idx < 0 || idx >= NUM_DEFAULT_KEYS) {
-		printk(KERN_DEBUG "%s: set_encrypt - invalid idx=%d\n",
-		       sdata->dev->name, idx);
-		return -EINVAL;
-	}
-
-	if (remove) {
-		rcu_read_lock();
-
-		err = 0;
-
-		if (is_broadcast_ether_addr(sta_addr)) {
-			key = sdata->keys[idx];
-		} else {
-			sta = sta_info_get(local, sta_addr);
-			if (!sta) {
-				err = -ENOENT;
-				goto out_unlock;
-			}
-			key = sta->key;
-		}
-
-		ieee80211_key_free(key);
-	} else {
-		key = ieee80211_key_alloc(alg, idx, key_len, _key);
-		if (!key)
-			return -ENOMEM;
-
-		sta = NULL;
-		err = 0;
-
-		rcu_read_lock();
-
-		if (!is_broadcast_ether_addr(sta_addr)) {
-			set_tx_key = 0;
-			/*
-			 * According to the standard, the key index of a
-			 * pairwise key must be zero. However, some AP are
-			 * broken when it comes to WEP key indices, so we
-			 * work around this.
-			 */
-			if (idx != 0 && alg != ALG_WEP) {
-				ieee80211_key_free(key);
-				err = -EINVAL;
-				goto out_unlock;
-			}
-
-			sta = sta_info_get(local, sta_addr);
-			if (!sta) {
-				ieee80211_key_free(key);
-				err = -ENOENT;
-				goto out_unlock;
-			}
-		}
-
-		if (alg == ALG_WEP &&
-			key_len != LEN_WEP40 && key_len != LEN_WEP104) {
-			ieee80211_key_free(key);
-			err = -EINVAL;
-			goto out_unlock;
-		}
-
-		ieee80211_key_link(key, sdata, sta);
-
-		if (set_tx_key || (!sta && !sdata->default_key && key))
-			ieee80211_set_default_key(sdata, idx);
-		if (alg == ALG_AES_CMAC &&
-		    (set_tx_key || (!sta && !sdata->default_mgmt_key && key)))
-			ieee80211_set_default_mgmt_key(sdata, idx);
-	}
-
- out_unlock:
-	rcu_read_unlock();
-
-	return err;
-}
-
 static int ieee80211_ioctl_siwgenie(struct net_device *dev,
 				    struct iw_request_info *info,
 				    struct iw_point *data, char *extra)
@@ -131,11 +37,13 @@ static int ieee80211_ioctl_siwgenie(struct net_device *dev,
 
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		int ret = ieee80211_sta_set_extra_ie(sdata, extra, data->length);
-		if (ret)
+		if (ret && ret != -EALREADY)
 			return ret;
 		sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
 		sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
-		ieee80211_sta_req_auth(sdata);
+		sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
+		if (ret != -EALREADY)
+			ieee80211_sta_req_auth(sdata);
 		return 0;
 	}
 
@@ -149,17 +57,14 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-		sdata->u.ibss.flags &= ~IEEE80211_IBSS_AUTO_CHANNEL_SEL;
+		return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
 	else if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_CHANNEL_SEL;
 
 	/* freq->e == 0: freq->m = channel; otherwise freq = m * 10^e */
 	if (freq->e == 0) {
 		if (freq->m < 0) {
-			if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-				sdata->u.ibss.flags |=
-					IEEE80211_IBSS_AUTO_CHANNEL_SEL;
-			else if (sdata->vif.type == NL80211_IFTYPE_STATION)
+			if (sdata->vif.type == NL80211_IFTYPE_STATION)
 				sdata->u.mgd.flags |=
 					IEEE80211_STA_AUTO_CHANNEL_SEL;
 			return 0;
@@ -183,8 +88,12 @@ static int ieee80211_ioctl_giwfreq(struct net_device *dev,
 				   struct iw_freq *freq, char *extra)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	freq->m = local->hw.conf.channel->center_freq;
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
+
+	freq->m = local->oper_channel->center_freq;
 	freq->e = 6;
 
 	return 0;
@@ -195,15 +104,17 @@ static int ieee80211_ioctl_siwessid(struct net_device *dev,
 				    struct iw_request_info *info,
 				    struct iw_point *data, char *ssid)
 {
-	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	size_t len = data->length;
 	int ret;
 
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_siwessid(dev, info, data, ssid);
+
 	/* iwconfig uses nul termination in SSID.. */
 	if (len > 0 && ssid[len - 1] == '\0')
 		len--;
 
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		if (data->flags)
 			sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
@@ -215,10 +126,10 @@ static int ieee80211_ioctl_siwessid(struct net_device *dev,
 			return ret;
 
 		sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
+		sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
 		ieee80211_sta_req_auth(sdata);
 		return 0;
-	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
-		return ieee80211_ibss_set_ssid(sdata, ssid, len);
+	}
 
 	return -EOPNOTSUPP;
 }
@@ -229,9 +140,13 @@ static int ieee80211_ioctl_giwessid(struct net_device *dev,
 				    struct iw_point *data, char *ssid)
 {
 	size_t len;
-
 	struct ieee80211_sub_if_data *sdata;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_giwessid(dev, info, data, ssid);
+
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		int res = ieee80211_sta_get_ssid(sdata, ssid, &len);
 		if (res == 0) {
@@ -240,14 +155,6 @@ static int ieee80211_ioctl_giwessid(struct net_device *dev,
 		} else
 			data->flags = 0;
 		return res;
-	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		int res = ieee80211_ibss_get_ssid(sdata, ssid, &len);
-		if (res == 0) {
-			data->length = len;
-			data->flags = 1;
-		} else
-			data->flags = 0;
-		return res;
 	}
 
 	return -EOPNOTSUPP;
@@ -258,9 +165,11 @@ static int ieee80211_ioctl_siwap(struct net_device *dev,
 				 struct iw_request_info *info,
 				 struct sockaddr *ap_addr, char *extra)
 {
-	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_siwap(dev, info, ap_addr, extra);
 
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		int ret;
 
@@ -275,18 +184,9 @@ static int ieee80211_ioctl_siwap(struct net_device *dev,
 		if (ret)
 			return ret;
 		sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
+		sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
 		ieee80211_sta_req_auth(sdata);
 		return 0;
-	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		if (is_zero_ether_addr((u8 *) &ap_addr->sa_data))
-			sdata->u.ibss.flags |= IEEE80211_IBSS_AUTO_BSSID_SEL |
-					       IEEE80211_IBSS_AUTO_CHANNEL_SEL;
-		else if (is_broadcast_ether_addr((u8 *) &ap_addr->sa_data))
-			sdata->u.ibss.flags |= IEEE80211_IBSS_AUTO_BSSID_SEL;
-		else
-			sdata->u.ibss.flags &= ~IEEE80211_IBSS_AUTO_BSSID_SEL;
-
-		return ieee80211_ibss_set_bssid(sdata, (u8 *) &ap_addr->sa_data);
 	} else if (sdata->vif.type == NL80211_IFTYPE_WDS) {
 		/*
 		 * If it is necessary to update the WDS peer address
@@ -312,9 +212,11 @@ static int ieee80211_ioctl_giwap(struct net_device *dev,
 				 struct iw_request_info *info,
 				 struct sockaddr *ap_addr, char *extra)
 {
-	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		return cfg80211_ibss_wext_giwap(dev, info, ap_addr, extra);
 
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 		if (sdata->u.mgd.state == IEEE80211_STA_MLME_ASSOCIATED) {
 			ap_addr->sa_family = ARPHRD_ETHER;
@@ -322,13 +224,6 @@ static int ieee80211_ioctl_giwap(struct net_device *dev,
 		} else
 			memset(&ap_addr->sa_data, 0, ETH_ALEN);
 		return 0;
-	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
-		if (sdata->u.ibss.state == IEEE80211_IBSS_MLME_JOINED) {
-			ap_addr->sa_family = ARPHRD_ETHER;
-			memcpy(&ap_addr->sa_data, sdata->u.ibss.bssid, ETH_ALEN);
-		} else
-			memset(&ap_addr->sa_data, 0, ETH_ALEN);
-		return 0;
 	} else if (sdata->vif.type == NL80211_IFTYPE_WDS) {
 		ap_addr->sa_family = ARPHRD_ETHER;
 		memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
@@ -411,334 +306,6 @@ static int ieee80211_ioctl_giwrate(struct net_device *dev,
 	return 0;
 }
 
-static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
-				      struct iw_request_info *info,
-				      union iwreq_data *data, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_channel* chan = local->hw.conf.channel;
-	bool reconf = false;
-	u32 reconf_flags = 0;
-	int new_power_level;
-
-	if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
-		return -EINVAL;
-	if (data->txpower.flags & IW_TXPOW_RANGE)
-		return -EINVAL;
-	if (!chan)
-		return -EINVAL;
-
-	/* only change when not disabling */
-	if (!data->txpower.disabled) {
-		if (data->txpower.fixed) {
-			if (data->txpower.value < 0)
-				return -EINVAL;
-			new_power_level = data->txpower.value;
-			/*
-			 * Debatable, but we cannot do a fixed power
-			 * level above the regulatory constraint.
-			 * Use "iwconfig wlan0 txpower 15dBm" instead.
-			 */
-			if (new_power_level > chan->max_power)
-				return -EINVAL;
-		} else {
-			/*
-			 * Automatic power level setting, max being the value
-			 * passed in from userland.
-			 */
-			if (data->txpower.value < 0)
-				new_power_level = -1;
-			else
-				new_power_level = data->txpower.value;
-		}
-
-		reconf = true;
-
-		/*
-		 * ieee80211_hw_config() will limit to the channel's
-		 * max power and possibly power constraint from AP.
-		 */
-		local->user_power_level = new_power_level;
-	}
-
-	if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
-		local->hw.conf.radio_enabled = !(data->txpower.disabled);
-		reconf_flags |= IEEE80211_CONF_CHANGE_RADIO_ENABLED;
-		ieee80211_led_radio(local, local->hw.conf.radio_enabled);
-	}
-
-	if (reconf || reconf_flags)
-		ieee80211_hw_config(local, reconf_flags);
-
-	return 0;
-}
-
-static int ieee80211_ioctl_giwtxpower(struct net_device *dev,
-				   struct iw_request_info *info,
-				   union iwreq_data *data, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	data->txpower.fixed = 1;
-	data->txpower.disabled = !(local->hw.conf.radio_enabled);
-	data->txpower.value = local->hw.conf.power_level;
-	data->txpower.flags = IW_TXPOW_DBM;
-
-	return 0;
-}
-
-static int ieee80211_ioctl_siwrts(struct net_device *dev,
-				  struct iw_request_info *info,
-				  struct iw_param *rts, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	if (rts->disabled)
-		local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
-	else if (!rts->fixed)
-		/* if the rts value is not fixed, then take default */
-		local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
-	else if (rts->value < 0 || rts->value > IEEE80211_MAX_RTS_THRESHOLD)
-		return -EINVAL;
-	else
-		local->rts_threshold = rts->value;
-
-	/* If the wlan card performs RTS/CTS in hardware/firmware,
-	 * configure it here */
-
-	if (local->ops->set_rts_threshold)
-		local->ops->set_rts_threshold(local_to_hw(local),
-					     local->rts_threshold);
-
-	return 0;
-}
-
-static int ieee80211_ioctl_giwrts(struct net_device *dev,
-				  struct iw_request_info *info,
-				  struct iw_param *rts, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	rts->value = local->rts_threshold;
-	rts->disabled = (rts->value >= IEEE80211_MAX_RTS_THRESHOLD);
-	rts->fixed = 1;
-
-	return 0;
-}
-
-
-static int ieee80211_ioctl_siwfrag(struct net_device *dev,
-				   struct iw_request_info *info,
-				   struct iw_param *frag, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	if (frag->disabled)
-		local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
-	else if (!frag->fixed)
-		local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
-	else if (frag->value < 256 ||
-		 frag->value > IEEE80211_MAX_FRAG_THRESHOLD)
-		return -EINVAL;
-	else {
-		/* Fragment length must be even, so strip LSB. */
-		local->fragmentation_threshold = frag->value & ~0x1;
-	}
-
-	return 0;
-}
-
-static int ieee80211_ioctl_giwfrag(struct net_device *dev,
-				   struct iw_request_info *info,
-				   struct iw_param *frag, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	frag->value = local->fragmentation_threshold;
-	frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD);
-	frag->fixed = 1;
-
-	return 0;
-}
-
-
-static int ieee80211_ioctl_siwretry(struct net_device *dev,
-				    struct iw_request_info *info,
-				    struct iw_param *retry, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	if (retry->disabled ||
-	    (retry->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT)
-		return -EINVAL;
-
-	if (retry->flags & IW_RETRY_MAX) {
-		local->hw.conf.long_frame_max_tx_count = retry->value;
-	} else if (retry->flags & IW_RETRY_MIN) {
-		local->hw.conf.short_frame_max_tx_count = retry->value;
-	} else {
-		local->hw.conf.long_frame_max_tx_count = retry->value;
-		local->hw.conf.short_frame_max_tx_count = retry->value;
-	}
-
-	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
-
-	return 0;
-}
-
-
-static int ieee80211_ioctl_giwretry(struct net_device *dev,
-				    struct iw_request_info *info,
-				    struct iw_param *retry, char *extra)
-{
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
-	retry->disabled = 0;
-	if (retry->flags == 0 || retry->flags & IW_RETRY_MIN) {
-		/* first return min value, iwconfig will ask max value
-		 * later if needed */
-		retry->flags |= IW_RETRY_LIMIT;
-		retry->value = local->hw.conf.short_frame_max_tx_count;
-		if (local->hw.conf.long_frame_max_tx_count !=
-		    local->hw.conf.short_frame_max_tx_count)
-			retry->flags |= IW_RETRY_MIN;
-		return 0;
-	}
-	if (retry->flags & IW_RETRY_MAX) {
-		retry->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
-		retry->value = local->hw.conf.long_frame_max_tx_count;
-	}
-
-	return 0;
-}
-
-static int ieee80211_ioctl_siwmlme(struct net_device *dev,
-				   struct iw_request_info *info,
-				   struct iw_point *data, char *extra)
-{
-	struct ieee80211_sub_if_data *sdata;
-	struct iw_mlme *mlme = (struct iw_mlme *) extra;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	if (!(sdata->vif.type == NL80211_IFTYPE_STATION))
-		return -EINVAL;
-
-	switch (mlme->cmd) {
-	case IW_MLME_DEAUTH:
-		/* TODO: mlme->addr.sa_data */
-		return ieee80211_sta_deauthenticate(sdata, mlme->reason_code);
-	case IW_MLME_DISASSOC:
-		/* TODO: mlme->addr.sa_data */
-		return ieee80211_sta_disassociate(sdata, mlme->reason_code);
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-
-static int ieee80211_ioctl_siwencode(struct net_device *dev,
-				     struct iw_request_info *info,
-				     struct iw_point *erq, char *keybuf)
-{
-	struct ieee80211_sub_if_data *sdata;
-	int idx, i, alg = ALG_WEP;
-	u8 bcaddr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-	int remove = 0, ret;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
-	idx = erq->flags & IW_ENCODE_INDEX;
-	if (idx == 0) {
-		if (sdata->default_key)
-			for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
-				if (sdata->default_key == sdata->keys[i]) {
-					idx = i;
-					break;
-				}
-			}
-	} else if (idx < 1 || idx > 4)
-		return -EINVAL;
-	else
-		idx--;
-
-	if (erq->flags & IW_ENCODE_DISABLED)
-		remove = 1;
-	else if (erq->length == 0) {
-		/* No key data - just set the default TX key index */
-		ieee80211_set_default_key(sdata, idx);
-		return 0;
-	}
-
-	ret = ieee80211_set_encryption(
-		sdata, bcaddr,
-		idx, alg, remove,
-		!sdata->default_key,
-		keybuf, erq->length);
-
-	if (!ret) {
-		if (remove)
-			sdata->u.mgd.flags &= ~IEEE80211_STA_TKIP_WEP_USED;
-		else
-			sdata->u.mgd.flags |= IEEE80211_STA_TKIP_WEP_USED;
-	}
-
-	return ret;
-}
-
-
-static int ieee80211_ioctl_giwencode(struct net_device *dev,
-				     struct iw_request_info *info,
-				     struct iw_point *erq, char *key)
-{
-	struct ieee80211_sub_if_data *sdata;
-	int idx, i;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
-	idx = erq->flags & IW_ENCODE_INDEX;
-	if (idx < 1 || idx > 4) {
-		idx = -1;
-		if (!sdata->default_key)
-			idx = 0;
-		else for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
-			if (sdata->default_key == sdata->keys[i]) {
-				idx = i;
-				break;
-			}
-		}
-		if (idx < 0)
-			return -EINVAL;
-	} else
-		idx--;
-
-	erq->flags = idx + 1;
-
-	if (!sdata->keys[idx]) {
-		erq->length = 0;
-		erq->flags |= IW_ENCODE_DISABLED;
-		return 0;
-	}
-
-	memcpy(key, sdata->keys[idx]->conf.key,
-	       min_t(int, erq->length, sdata->keys[idx]->conf.keylen));
-	erq->length = sdata->keys[idx]->conf.keylen;
-	erq->flags |= IW_ENCODE_ENABLED;
-
-	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
-		switch (sdata->u.mgd.auth_alg) {
-		case WLAN_AUTH_OPEN:
-		case WLAN_AUTH_LEAP:
-			erq->flags |= IW_ENCODE_OPEN;
-			break;
-		case WLAN_AUTH_SHARED_KEY:
-			erq->flags |= IW_ENCODE_RESTRICTED;
-			break;
-		}
-	}
-
-	return 0;
-}
-
 static int ieee80211_ioctl_siwpower(struct net_device *dev,
 				    struct iw_request_info *info,
 				    struct iw_param *wrq,
@@ -747,7 +314,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_conf *conf = &local->hw.conf;
-	int ret = 0, timeout = 0;
+	int timeout = 0;
 	bool ps;
 
 	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
@@ -779,42 +346,18 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
 		timeout = wrq->value / 1000;
 
  set:
-	if (ps == local->powersave && timeout == conf->dynamic_ps_timeout)
-		return ret;
+	if (ps == sdata->u.mgd.powersave && timeout == conf->dynamic_ps_timeout)
+		return 0;
 
-	local->powersave = ps;
+	sdata->u.mgd.powersave = ps;
 	conf->dynamic_ps_timeout = timeout;
 
 	if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
-		ret = ieee80211_hw_config(local,
-					  IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT);
-
-	if (!(sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED))
-		return ret;
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 
-	if (conf->dynamic_ps_timeout > 0 &&
-	    !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
-		mod_timer(&local->dynamic_ps_timer, jiffies +
-			  msecs_to_jiffies(conf->dynamic_ps_timeout));
-	} else {
-		if (local->powersave) {
-			if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
-				ieee80211_send_nullfunc(local, sdata, 1);
-			conf->flags |= IEEE80211_CONF_PS;
-			ret = ieee80211_hw_config(local,
-					IEEE80211_CONF_CHANGE_PS);
-		} else {
-			conf->flags &= ~IEEE80211_CONF_PS;
-			ret = ieee80211_hw_config(local,
-					IEEE80211_CONF_CHANGE_PS);
-			if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
-				ieee80211_send_nullfunc(local, sdata, 0);
-			del_timer_sync(&local->dynamic_ps_timer);
-			cancel_work_sync(&local->dynamic_ps_enable_work);
-		}
-	}
+	ieee80211_recalc_ps(local, -1);
 
-	return ret;
+	return 0;
 }
 
 static int ieee80211_ioctl_giwpower(struct net_device *dev,
@@ -822,9 +365,9 @@ static int ieee80211_ioctl_giwpower(struct net_device *dev,
 				    union iwreq_data *wrqu,
 				    char *extra)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	wrqu->power.disabled = !local->powersave;
+	wrqu->power.disabled = !sdata->u.mgd.powersave;
 
 	return 0;
 }
@@ -997,82 +540,6 @@ static int ieee80211_ioctl_giwauth(struct net_device *dev,
 }
 
 
-static int ieee80211_ioctl_siwencodeext(struct net_device *dev,
-					struct iw_request_info *info,
-					struct iw_point *erq, char *extra)
-{
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
-	int uninitialized_var(alg), idx, i, remove = 0;
-
-	switch (ext->alg) {
-	case IW_ENCODE_ALG_NONE:
-		remove = 1;
-		break;
-	case IW_ENCODE_ALG_WEP:
-		alg = ALG_WEP;
-		break;
-	case IW_ENCODE_ALG_TKIP:
-		alg = ALG_TKIP;
-		break;
-	case IW_ENCODE_ALG_CCMP:
-		alg = ALG_CCMP;
-		break;
-	case IW_ENCODE_ALG_AES_CMAC:
-		alg = ALG_AES_CMAC;
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	if (erq->flags & IW_ENCODE_DISABLED)
-		remove = 1;
-
-	idx = erq->flags & IW_ENCODE_INDEX;
-	if (alg == ALG_AES_CMAC) {
-		if (idx < NUM_DEFAULT_KEYS + 1 ||
-		    idx > NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) {
-			idx = -1;
-			if (!sdata->default_mgmt_key)
-				idx = 0;
-			else for (i = NUM_DEFAULT_KEYS;
-				  i < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS;
-				  i++) {
-				if (sdata->default_mgmt_key == sdata->keys[i])
-				{
-					idx = i;
-					break;
-				}
-			}
-			if (idx < 0)
-				return -EINVAL;
-		} else
-			idx--;
-	} else {
-		if (idx < 1 || idx > 4) {
-			idx = -1;
-			if (!sdata->default_key)
-				idx = 0;
-			else for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
-				if (sdata->default_key == sdata->keys[i]) {
-					idx = i;
-					break;
-				}
-			}
-			if (idx < 0)
-				return -EINVAL;
-		} else
-			idx--;
-	}
-
-	return ieee80211_set_encryption(sdata, ext->addr.sa_data, idx, alg,
-					remove,
-					ext->ext_flags &
-					IW_ENCODE_EXT_SET_TX_KEY,
-					ext->key, ext->key_len);
-}
-
-
 /* Structures to export the Wireless Handlers */
 
 static const iw_handler ieee80211_handler[] =
@@ -1099,7 +566,7 @@ static const iw_handler ieee80211_handler[] =
 	(iw_handler) NULL,				/* SIOCGIWTHRSPY */
 	(iw_handler) ieee80211_ioctl_siwap,		/* SIOCSIWAP */
 	(iw_handler) ieee80211_ioctl_giwap,		/* SIOCGIWAP */
-	(iw_handler) ieee80211_ioctl_siwmlme,		/* SIOCSIWMLME */
+	(iw_handler) cfg80211_wext_siwmlme,		/* SIOCSIWMLME */
 	(iw_handler) NULL,				/* SIOCGIWAPLIST */
 	(iw_handler) cfg80211_wext_siwscan,		/* SIOCSIWSCAN */
 	(iw_handler) cfg80211_wext_giwscan,		/* SIOCGIWSCAN */
@@ -1111,16 +578,16 @@ static const iw_handler ieee80211_handler[] =
 	(iw_handler) NULL,				/* -- hole -- */
 	(iw_handler) ieee80211_ioctl_siwrate,		/* SIOCSIWRATE */
 	(iw_handler) ieee80211_ioctl_giwrate,		/* SIOCGIWRATE */
-	(iw_handler) ieee80211_ioctl_siwrts,		/* SIOCSIWRTS */
-	(iw_handler) ieee80211_ioctl_giwrts,		/* SIOCGIWRTS */
-	(iw_handler) ieee80211_ioctl_siwfrag,		/* SIOCSIWFRAG */
-	(iw_handler) ieee80211_ioctl_giwfrag,		/* SIOCGIWFRAG */
-	(iw_handler) ieee80211_ioctl_siwtxpower,	/* SIOCSIWTXPOW */
-	(iw_handler) ieee80211_ioctl_giwtxpower,	/* SIOCGIWTXPOW */
-	(iw_handler) ieee80211_ioctl_siwretry,		/* SIOCSIWRETRY */
-	(iw_handler) ieee80211_ioctl_giwretry,		/* SIOCGIWRETRY */
-	(iw_handler) ieee80211_ioctl_siwencode,		/* SIOCSIWENCODE */
-	(iw_handler) ieee80211_ioctl_giwencode,		/* SIOCGIWENCODE */
+	(iw_handler) cfg80211_wext_siwrts,		/* SIOCSIWRTS */
+	(iw_handler) cfg80211_wext_giwrts,		/* SIOCGIWRTS */
+	(iw_handler) cfg80211_wext_siwfrag,		/* SIOCSIWFRAG */
+	(iw_handler) cfg80211_wext_giwfrag,		/* SIOCGIWFRAG */
+	(iw_handler) cfg80211_wext_siwtxpower,		/* SIOCSIWTXPOW */
+	(iw_handler) cfg80211_wext_giwtxpower,		/* SIOCGIWTXPOW */
+	(iw_handler) cfg80211_wext_siwretry,		/* SIOCSIWRETRY */
+	(iw_handler) cfg80211_wext_giwretry,		/* SIOCGIWRETRY */
+	(iw_handler) cfg80211_wext_siwencode,		/* SIOCSIWENCODE */
+	(iw_handler) cfg80211_wext_giwencode,		/* SIOCGIWENCODE */
 	(iw_handler) ieee80211_ioctl_siwpower,		/* SIOCSIWPOWER */
 	(iw_handler) ieee80211_ioctl_giwpower,		/* SIOCGIWPOWER */
 	(iw_handler) NULL,				/* -- hole -- */
@@ -1129,7 +596,7 @@ static const iw_handler ieee80211_handler[] =
 	(iw_handler) NULL,				/* SIOCGIWGENIE */
 	(iw_handler) ieee80211_ioctl_siwauth,		/* SIOCSIWAUTH */
 	(iw_handler) ieee80211_ioctl_giwauth,		/* SIOCGIWAUTH */
-	(iw_handler) ieee80211_ioctl_siwencodeext,	/* SIOCSIWENCODEEXT */
+	(iw_handler) cfg80211_wext_siwencodeext,	/* SIOCSIWENCODEEXT */
 	(iw_handler) NULL,				/* SIOCGIWENCODEEXT */
 	(iw_handler) NULL,				/* SIOCSIWPMKSA */
 	(iw_handler) NULL,				/* -- hole -- */
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 0b8ad1f4ecd..116a923b14d 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -23,34 +23,6 @@
  */
 const int ieee802_1d_to_ac[8] = { 2, 3, 3, 2, 1, 1, 0, 0 };
 
-static const char llc_ip_hdr[8] = {0xAA, 0xAA, 0x3, 0, 0, 0, 0x08, 0};
-
-/* Given a data frame determine the 802.1p/1d tag to use.  */
-static unsigned int classify_1d(struct sk_buff *skb)
-{
-	unsigned int dscp;
-
-	/* skb->priority values from 256->263 are magic values to
-	 * directly indicate a specific 802.1d priority.  This is used
-	 * to allow 802.1d priority to be passed directly in from VLAN
-	 * tags, etc.
-	 */
-	if (skb->priority >= 256 && skb->priority <= 263)
-		return skb->priority - 256;
-
-	switch (skb->protocol) {
-	case htons(ETH_P_IP):
-		dscp = ip_hdr(skb)->tos & 0xfc;
-		break;
-
-	default:
-		return 0;
-	}
-
-	return dscp >> 5;
-}
-
-
 static int wme_downgrade_ac(struct sk_buff *skb)
 {
 	switch (skb->priority) {
@@ -94,7 +66,7 @@ static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb)
 
 	/* use the data classifier to determine what 802.1d tag the
 	 * data frame has */
-	skb->priority = classify_1d(skb);
+	skb->priority = cfg80211_classify8021d(skb);
 
 	/* in case we are a client verify acm is not set for this ac */
 	while (unlikely(local->wmm_acm & BIT(skb->priority))) {
@@ -129,11 +101,11 @@ u16 ieee80211_select_queue(struct net_device *dev, struct sk_buff *skb)
 	 * Now we know the 1d priority, fill in the QoS header if
 	 * there is one (and we haven't done this before).
 	 */
-	if (!skb->requeue && ieee80211_is_data_qos(hdr->frame_control)) {
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
 		u8 *p = ieee80211_get_qos_ctl(hdr);
 		u8 ack_policy = 0;
 		tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
-		if (local->wifi_wme_noack_test)
+		if (unlikely(local->wifi_wme_noack_test))
 			ack_policy |= QOS_CONTROL_ACK_POLICY_NOACK <<
 					QOS_CONTROL_ACK_POLICY_SHIFT;
 		/* qos header is 2 bytes, second reserved */
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index 4f8bfea278f..dcfae8884b8 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -122,7 +122,7 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx)
 			return RX_DROP_UNUSABLE;
 
 		mac80211_ev_michael_mic_failure(rx->sdata, rx->key->conf.keyidx,
-						(void *) skb->data);
+						(void *) skb->data, NULL);
 		return RX_DROP_UNUSABLE;
 	}
 
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index cb3ad741ebf..634d14affc8 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -327,7 +327,7 @@ config NETFILTER_XT_TARGET_CONNMARK
 
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
-	  ipt_CONNMARK.ko.  If unsure, say `N'.
+	  ipt_CONNMARK.  If unsure, say `N'.
 
 config NETFILTER_XT_TARGET_CONNSECMARK
 	tristate '"CONNSECMARK" target support'
@@ -584,7 +584,7 @@ config NETFILTER_XT_MATCH_CONNMARK
 
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  The module will be called
-	  ipt_connmark.ko.  If unsure, say `N'.
+	  ipt_connmark.  If unsure, say `N'.
 
 config NETFILTER_XT_MATCH_CONNTRACK
 	tristate '"conntrack" connection tracking match support'
@@ -917,6 +917,19 @@ config NETFILTER_XT_MATCH_U32
 
 	  Details and examples are in the kernel module source.
 
+config NETFILTER_XT_MATCH_OSF
+	tristate '"osf" Passive OS fingerprint match'
+	depends on NETFILTER_ADVANCED && NETFILTER_NETLINK
+	help
+	  This option selects the Passive OS Fingerprinting match module
+	  that allows to passively match the remote operating system by
+	  analyzing incoming TCP SYN packets.
+
+	  Rules and loading software can be downloaded from
+	  http://www.ioremap.net/projects/osf
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
 endif # NETFILTER_XTABLES
 
 endmenu
diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile
index 6282060fbda..49f62ee4e9f 100644
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_LIMIT) += xt_limit.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MAC) += xt_mac.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MARK) += xt_mark.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_MULTIPORT) += xt_multiport.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_OSF) += xt_osf.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_OWNER) += xt_owner.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
 obj-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += xt_pkttype.o
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index e01061f49cd..7c1333c67ff 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -3345,22 +3345,8 @@ static struct genl_ops ip_vs_genl_ops[] __read_mostly = {
 
 static int __init ip_vs_genl_register(void)
 {
-	int ret, i;
-
-	ret = genl_register_family(&ip_vs_genl_family);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < ARRAY_SIZE(ip_vs_genl_ops); i++) {
-		ret = genl_register_ops(&ip_vs_genl_family, &ip_vs_genl_ops[i]);
-		if (ret)
-			goto err_out;
-	}
-	return 0;
-
-err_out:
-	genl_unregister_family(&ip_vs_genl_family);
-	return ret;
+	return genl_register_family_with_ops(&ip_vs_genl_family,
+		ip_vs_genl_ops, ARRAY_SIZE(ip_vs_genl_ops));
 }
 
 static void ip_vs_genl_unregister(void)
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index 425ab144f15..5874657af7f 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -260,8 +260,8 @@ ip_vs_bypass_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	ip_send_check(ip_hdr(skb));
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* Another hack: avoid icmp_send in ip_fragment */
 	skb->local_df = 1;
@@ -324,8 +324,8 @@ ip_vs_bypass_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	}
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* Another hack: avoid icmp_send in ip_fragment */
 	skb->local_df = 1;
@@ -388,8 +388,8 @@ ip_vs_nat_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 		goto tx_error_put;
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* mangle the packet */
 	if (pp->dnat_handler && !pp->dnat_handler(skb, pp, cp))
@@ -465,8 +465,8 @@ ip_vs_nat_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 		goto tx_error_put;
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* mangle the packet */
 	if (pp->dnat_handler && !pp->dnat_handler(skb, pp, cp))
@@ -553,8 +553,8 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 		IP_VS_DBG_RL("ip_vs_tunnel_xmit(): mtu less than 68\n");
 		goto tx_error;
 	}
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	df |= (old_iph->frag_off & htons(IP_DF));
 
@@ -596,8 +596,8 @@ ip_vs_tunnel_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
@@ -665,8 +665,8 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 		IP_VS_DBG_RL("ip_vs_tunnel_xmit_v6(): mtu less than 1280\n");
 		goto tx_error;
 	}
-	if (skb->dst)
-		skb->dst->ops->update_pmtu(skb->dst, mtu);
+	if (skb_dst(skb))
+		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
 
 	if (mtu < ntohs(old_iph->payload_len) + sizeof(struct ipv6hdr)) {
 		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
@@ -702,8 +702,8 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/*
 	 *	Push down and install the IPIP header.
@@ -775,8 +775,8 @@ ip_vs_dr_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 	ip_send_check(ip_hdr(skb));
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* Another hack: avoid icmp_send in ip_fragment */
 	skb->local_df = 1;
@@ -828,8 +828,8 @@ ip_vs_dr_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 	}
 
 	/* drop old route */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	/* Another hack: avoid icmp_send in ip_fragment */
 	skb->local_df = 1;
@@ -900,8 +900,8 @@ ip_vs_icmp_xmit(struct sk_buff *skb, struct ip_vs_conn *cp,
 		goto tx_error_put;
 
 	/* drop the old route when skb is not shared */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	ip_vs_nat_icmp(skb, pp, cp, 0);
 
@@ -975,8 +975,8 @@ ip_vs_icmp_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp,
 		goto tx_error_put;
 
 	/* drop the old route when skb is not shared */
-	dst_release(skb->dst);
-	skb->dst = &rt->u.dst;
+	skb_dst_drop(skb);
+	skb_dst_set(skb, &rt->u.dst);
 
 	ip_vs_nat_icmp_v6(skb, pp, cp, 0);
 
diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c
index 9fe8982bd7c..4a1d94aac20 100644
--- a/net/netfilter/nf_conntrack_acct.c
+++ b/net/netfilter/nf_conntrack_acct.c
@@ -116,7 +116,7 @@ int nf_conntrack_acct_init(struct net *net)
 	if (net_eq(net, &init_net)) {
 #ifdef CONFIG_NF_CT_ACCT
 	printk(KERN_WARNING "CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use\n");
-		printk(KERN_WARNING "nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or\n");
+		printk(KERN_WARNING "nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or\n");
 		printk(KERN_WARNING "sysctl net.netfilter.nf_conntrack_acct=1 to enable it.\n");
 #endif
 
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 8020db6274b..5f72b94b491 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -39,6 +39,7 @@
 #include <net/netfilter/nf_conntrack_core.h>
 #include <net/netfilter/nf_conntrack_extend.h>
 #include <net/netfilter/nf_conntrack_acct.h>
+#include <net/netfilter/nf_conntrack_ecache.h>
 #include <net/netfilter/nf_nat.h>
 #include <net/netfilter/nf_nat_core.h>
 
@@ -182,10 +183,6 @@ destroy_conntrack(struct nf_conntrack *nfct)
 	NF_CT_ASSERT(atomic_read(&nfct->use) == 0);
 	NF_CT_ASSERT(!timer_pending(&ct->timeout));
 
-	if (!test_bit(IPS_DYING_BIT, &ct->status))
-		nf_conntrack_event(IPCT_DESTROY, ct);
-	set_bit(IPS_DYING_BIT, &ct->status);
-
 	/* To make sure we don't get any weird locking issues here:
 	 * destroy_conntrack() MUST NOT be called with a write lock
 	 * to nf_conntrack_lock!!! -HW */
@@ -219,27 +216,70 @@ destroy_conntrack(struct nf_conntrack *nfct)
 	nf_conntrack_free(ct);
 }
 
-static void death_by_timeout(unsigned long ul_conntrack)
+void nf_ct_delete_from_lists(struct nf_conn *ct)
 {
-	struct nf_conn *ct = (void *)ul_conntrack;
 	struct net *net = nf_ct_net(ct);
-	struct nf_conn_help *help = nfct_help(ct);
-	struct nf_conntrack_helper *helper;
-
-	if (help) {
-		rcu_read_lock();
-		helper = rcu_dereference(help->helper);
-		if (helper && helper->destroy)
-			helper->destroy(ct);
-		rcu_read_unlock();
-	}
 
+	nf_ct_helper_destroy(ct);
 	spin_lock_bh(&nf_conntrack_lock);
 	/* Inside lock so preempt is disabled on module removal path.
 	 * Otherwise we can get spurious warnings. */
 	NF_CT_STAT_INC(net, delete_list);
 	clean_from_lists(ct);
 	spin_unlock_bh(&nf_conntrack_lock);
+}
+EXPORT_SYMBOL_GPL(nf_ct_delete_from_lists);
+
+static void death_by_event(unsigned long ul_conntrack)
+{
+	struct nf_conn *ct = (void *)ul_conntrack;
+	struct net *net = nf_ct_net(ct);
+
+	if (nf_conntrack_event(IPCT_DESTROY, ct) < 0) {
+		/* bad luck, let's retry again */
+		ct->timeout.expires = jiffies +
+			(random32() % net->ct.sysctl_events_retry_timeout);
+		add_timer(&ct->timeout);
+		return;
+	}
+	/* we've got the event delivered, now it's dying */
+	set_bit(IPS_DYING_BIT, &ct->status);
+	spin_lock(&nf_conntrack_lock);
+	hlist_nulls_del(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode);
+	spin_unlock(&nf_conntrack_lock);
+	nf_ct_put(ct);
+}
+
+void nf_ct_insert_dying_list(struct nf_conn *ct)
+{
+	struct net *net = nf_ct_net(ct);
+
+	/* add this conntrack to the dying list */
+	spin_lock_bh(&nf_conntrack_lock);
+	hlist_nulls_add_head(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode,
+			     &net->ct.dying);
+	spin_unlock_bh(&nf_conntrack_lock);
+	/* set a new timer to retry event delivery */
+	setup_timer(&ct->timeout, death_by_event, (unsigned long)ct);
+	ct->timeout.expires = jiffies +
+		(random32() % net->ct.sysctl_events_retry_timeout);
+	add_timer(&ct->timeout);
+}
+EXPORT_SYMBOL_GPL(nf_ct_insert_dying_list);
+
+static void death_by_timeout(unsigned long ul_conntrack)
+{
+	struct nf_conn *ct = (void *)ul_conntrack;
+
+	if (!test_bit(IPS_DYING_BIT, &ct->status) &&
+	    unlikely(nf_conntrack_event(IPCT_DESTROY, ct) < 0)) {
+		/* destroy event was not delivered */
+		nf_ct_delete_from_lists(ct);
+		nf_ct_insert_dying_list(ct);
+		return;
+	}
+	set_bit(IPS_DYING_BIT, &ct->status);
+	nf_ct_delete_from_lists(ct);
 	nf_ct_put(ct);
 }
 
@@ -398,11 +438,7 @@ __nf_conntrack_confirm(struct sk_buff *skb)
 	help = nfct_help(ct);
 	if (help && help->helper)
 		nf_conntrack_event_cache(IPCT_HELPER, ct);
-#ifdef CONFIG_NF_NAT_NEEDED
-	if (test_bit(IPS_SRC_NAT_DONE_BIT, &ct->status) ||
-	    test_bit(IPS_DST_NAT_DONE_BIT, &ct->status))
-		nf_conntrack_event_cache(IPCT_NATINFO, ct);
-#endif
+
 	nf_conntrack_event_cache(master_ct(ct) ?
 				 IPCT_RELATED : IPCT_NEW, ct);
 	return NF_ACCEPT;
@@ -523,6 +559,7 @@ struct nf_conn *nf_conntrack_alloc(struct net *net,
 		return ERR_PTR(-ENOMEM);
 	}
 
+	spin_lock_init(&ct->lock);
 	atomic_set(&ct->ct_general.use, 1);
 	ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple = *orig;
 	ct->tuplehash[IP_CT_DIR_REPLY].tuple = *repl;
@@ -580,6 +617,7 @@ init_conntrack(struct net *net,
 	}
 
 	nf_ct_acct_ext_add(ct, GFP_ATOMIC);
+	nf_ct_ecache_ext_add(ct, GFP_ATOMIC);
 
 	spin_lock_bh(&nf_conntrack_lock);
 	exp = nf_ct_find_expectation(net, tuple);
@@ -807,13 +845,9 @@ void __nf_ct_refresh_acct(struct nf_conn *ct,
 			  unsigned long extra_jiffies,
 			  int do_acct)
 {
-	int event = 0;
-
 	NF_CT_ASSERT(ct->timeout.data == (unsigned long)ct);
 	NF_CT_ASSERT(skb);
 
-	spin_lock_bh(&nf_conntrack_lock);
-
 	/* Only update if this is not a fixed timeout */
 	if (test_bit(IPS_FIXED_TIMEOUT_BIT, &ct->status))
 		goto acct;
@@ -821,19 +855,14 @@ void __nf_ct_refresh_acct(struct nf_conn *ct,
 	/* If not in hash table, timer will not be active yet */
 	if (!nf_ct_is_confirmed(ct)) {
 		ct->timeout.expires = extra_jiffies;
-		event = IPCT_REFRESH;
 	} else {
 		unsigned long newtime = jiffies + extra_jiffies;
 
 		/* Only update the timeout if the new timeout is at least
 		   HZ jiffies from the old timeout. Need del_timer for race
 		   avoidance (may already be dying). */
-		if (newtime - ct->timeout.expires >= HZ
-		    && del_timer(&ct->timeout)) {
-			ct->timeout.expires = newtime;
-			add_timer(&ct->timeout);
-			event = IPCT_REFRESH;
-		}
+		if (newtime - ct->timeout.expires >= HZ)
+			mod_timer_pending(&ct->timeout, newtime);
 	}
 
 acct:
@@ -842,17 +871,13 @@ acct:
 
 		acct = nf_conn_acct_find(ct);
 		if (acct) {
+			spin_lock_bh(&ct->lock);
 			acct[CTINFO2DIR(ctinfo)].packets++;
 			acct[CTINFO2DIR(ctinfo)].bytes +=
 				skb->len - skb_network_offset(skb);
+			spin_unlock_bh(&ct->lock);
 		}
 	}
-
-	spin_unlock_bh(&nf_conntrack_lock);
-
-	/* must be unlocked when calling event cache */
-	if (event)
-		nf_conntrack_event_cache(event, ct);
 }
 EXPORT_SYMBOL_GPL(__nf_ct_refresh_acct);
 
@@ -864,14 +889,14 @@ bool __nf_ct_kill_acct(struct nf_conn *ct,
 	if (do_acct) {
 		struct nf_conn_counter *acct;
 
-		spin_lock_bh(&nf_conntrack_lock);
 		acct = nf_conn_acct_find(ct);
 		if (acct) {
+			spin_lock_bh(&ct->lock);
 			acct[CTINFO2DIR(ctinfo)].packets++;
 			acct[CTINFO2DIR(ctinfo)].bytes +=
 				skb->len - skb_network_offset(skb);
+			spin_unlock_bh(&ct->lock);
 		}
-		spin_unlock_bh(&nf_conntrack_lock);
 	}
 
 	if (del_timer(&ct->timeout)) {
@@ -1001,15 +1026,22 @@ struct __nf_ct_flush_report {
 	int report;
 };
 
-static int kill_all(struct nf_conn *i, void *data)
+static int kill_report(struct nf_conn *i, void *data)
 {
 	struct __nf_ct_flush_report *fr = (struct __nf_ct_flush_report *)data;
 
-	/* get_next_corpse sets the dying bit for us */
-	nf_conntrack_event_report(IPCT_DESTROY,
-				  i,
-				  fr->pid,
-				  fr->report);
+	/* If we fail to deliver the event, death_by_timeout() will retry */
+	if (nf_conntrack_event_report(IPCT_DESTROY, i,
+				      fr->pid, fr->report) < 0)
+		return 1;
+
+	/* Avoid the delivery of the destroy event in death_by_timeout(). */
+	set_bit(IPS_DYING_BIT, &i->status);
+	return 1;
+}
+
+static int kill_all(struct nf_conn *i, void *data)
+{
 	return 1;
 }
 
@@ -1023,15 +1055,30 @@ void nf_ct_free_hashtable(void *hash, int vmalloced, unsigned int size)
 }
 EXPORT_SYMBOL_GPL(nf_ct_free_hashtable);
 
-void nf_conntrack_flush(struct net *net, u32 pid, int report)
+void nf_conntrack_flush_report(struct net *net, u32 pid, int report)
 {
 	struct __nf_ct_flush_report fr = {
 		.pid 	= pid,
 		.report = report,
 	};
-	nf_ct_iterate_cleanup(net, kill_all, &fr);
+	nf_ct_iterate_cleanup(net, kill_report, &fr);
+}
+EXPORT_SYMBOL_GPL(nf_conntrack_flush_report);
+
+static void nf_ct_release_dying_list(void)
+{
+	struct nf_conntrack_tuple_hash *h;
+	struct nf_conn *ct;
+	struct hlist_nulls_node *n;
+
+	spin_lock_bh(&nf_conntrack_lock);
+	hlist_nulls_for_each_entry(h, n, &init_net.ct.dying, hnnode) {
+		ct = nf_ct_tuplehash_to_ctrack(h);
+		/* never fails to remove them, no listeners at this point */
+		nf_ct_kill(ct);
+	}
+	spin_unlock_bh(&nf_conntrack_lock);
 }
-EXPORT_SYMBOL_GPL(nf_conntrack_flush);
 
 static void nf_conntrack_cleanup_init_net(void)
 {
@@ -1042,10 +1089,9 @@ static void nf_conntrack_cleanup_init_net(void)
 
 static void nf_conntrack_cleanup_net(struct net *net)
 {
-	nf_ct_event_cache_flush(net);
-	nf_conntrack_ecache_fini(net);
  i_see_dead_people:
-	nf_conntrack_flush(net, 0, 0);
+	nf_ct_iterate_cleanup(net, kill_all, NULL);
+	nf_ct_release_dying_list();
 	if (atomic_read(&net->ct.count) != 0) {
 		schedule();
 		goto i_see_dead_people;
@@ -1056,6 +1102,7 @@ static void nf_conntrack_cleanup_net(struct net *net)
 
 	nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc,
 			     nf_conntrack_htable_size);
+	nf_conntrack_ecache_fini(net);
 	nf_conntrack_acct_fini(net);
 	nf_conntrack_expect_fini(net);
 	free_percpu(net->ct.stat);
@@ -1226,14 +1273,12 @@ static int nf_conntrack_init_net(struct net *net)
 
 	atomic_set(&net->ct.count, 0);
 	INIT_HLIST_NULLS_HEAD(&net->ct.unconfirmed, 0);
+	INIT_HLIST_NULLS_HEAD(&net->ct.dying, 0);
 	net->ct.stat = alloc_percpu(struct ip_conntrack_stat);
 	if (!net->ct.stat) {
 		ret = -ENOMEM;
 		goto err_stat;
 	}
-	ret = nf_conntrack_ecache_init(net);
-	if (ret < 0)
-		goto err_ecache;
 	net->ct.hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size,
 					     &net->ct.hash_vmalloc, 1);
 	if (!net->ct.hash) {
@@ -1247,6 +1292,9 @@ static int nf_conntrack_init_net(struct net *net)
 	ret = nf_conntrack_acct_init(net);
 	if (ret < 0)
 		goto err_acct;
+	ret = nf_conntrack_ecache_init(net);
+	if (ret < 0)
+		goto err_ecache;
 
 	/* Set up fake conntrack:
 	    - to never be deleted, not in any hashes */
@@ -1259,14 +1307,14 @@ static int nf_conntrack_init_net(struct net *net)
 
 	return 0;
 
+err_ecache:
+	nf_conntrack_acct_fini(net);
 err_acct:
 	nf_conntrack_expect_fini(net);
 err_expect:
 	nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc,
 			     nf_conntrack_htable_size);
 err_hash:
-	nf_conntrack_ecache_fini(net);
-err_ecache:
 	free_percpu(net->ct.stat);
 err_stat:
 	return ret;
diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c
index dee4190209c..aee560b4768 100644
--- a/net/netfilter/nf_conntrack_ecache.c
+++ b/net/netfilter/nf_conntrack_ecache.c
@@ -16,121 +16,245 @@
 #include <linux/stddef.h>
 #include <linux/err.h>
 #include <linux/percpu.h>
-#include <linux/notifier.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 
 #include <net/netfilter/nf_conntrack.h>
 #include <net/netfilter/nf_conntrack_core.h>
+#include <net/netfilter/nf_conntrack_extend.h>
 
-ATOMIC_NOTIFIER_HEAD(nf_conntrack_chain);
-EXPORT_SYMBOL_GPL(nf_conntrack_chain);
+static DEFINE_MUTEX(nf_ct_ecache_mutex);
 
-ATOMIC_NOTIFIER_HEAD(nf_ct_expect_chain);
-EXPORT_SYMBOL_GPL(nf_ct_expect_chain);
+struct nf_ct_event_notifier *nf_conntrack_event_cb __read_mostly;
+EXPORT_SYMBOL_GPL(nf_conntrack_event_cb);
+
+struct nf_exp_event_notifier *nf_expect_event_cb __read_mostly;
+EXPORT_SYMBOL_GPL(nf_expect_event_cb);
 
 /* deliver cached events and clear cache entry - must be called with locally
  * disabled softirqs */
-static inline void
-__nf_ct_deliver_cached_events(struct nf_conntrack_ecache *ecache)
+void nf_ct_deliver_cached_events(struct nf_conn *ct)
 {
-	if (nf_ct_is_confirmed(ecache->ct) && !nf_ct_is_dying(ecache->ct)
-	    && ecache->events) {
+	unsigned long events;
+	struct nf_ct_event_notifier *notify;
+	struct nf_conntrack_ecache *e;
+
+	rcu_read_lock();
+	notify = rcu_dereference(nf_conntrack_event_cb);
+	if (notify == NULL)
+		goto out_unlock;
+
+	e = nf_ct_ecache_find(ct);
+	if (e == NULL)
+		goto out_unlock;
+
+	events = xchg(&e->cache, 0);
+
+	if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct) && events) {
 		struct nf_ct_event item = {
-			.ct 	= ecache->ct,
+			.ct	= ct,
 			.pid	= 0,
 			.report	= 0
 		};
+		int ret;
+		/* We make a copy of the missed event cache without taking
+		 * the lock, thus we may send missed events twice. However,
+		 * this does not harm and it happens very rarely. */
+		unsigned long missed = e->missed;
 
-		atomic_notifier_call_chain(&nf_conntrack_chain,
-					   ecache->events,
-					   &item);
+		ret = notify->fcn(events | missed, &item);
+		if (unlikely(ret < 0 || missed)) {
+			spin_lock_bh(&ct->lock);
+			if (ret < 0)
+				e->missed |= events;
+			else
+				e->missed &= ~missed;
+			spin_unlock_bh(&ct->lock);
+		} 
 	}
 
-	ecache->events = 0;
-	nf_ct_put(ecache->ct);
-	ecache->ct = NULL;
+out_unlock:
+	rcu_read_unlock();
 }
+EXPORT_SYMBOL_GPL(nf_ct_deliver_cached_events);
 
-/* Deliver all cached events for a particular conntrack. This is called
- * by code prior to async packet handling for freeing the skb */
-void nf_ct_deliver_cached_events(const struct nf_conn *ct)
+int nf_conntrack_register_notifier(struct nf_ct_event_notifier *new)
 {
-	struct net *net = nf_ct_net(ct);
-	struct nf_conntrack_ecache *ecache;
-
-	local_bh_disable();
-	ecache = per_cpu_ptr(net->ct.ecache, raw_smp_processor_id());
-	if (ecache->ct == ct)
-		__nf_ct_deliver_cached_events(ecache);
-	local_bh_enable();
+	int ret = 0;
+	struct nf_ct_event_notifier *notify;
+
+	mutex_lock(&nf_ct_ecache_mutex);
+	notify = rcu_dereference(nf_conntrack_event_cb);
+	if (notify != NULL) {
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+	rcu_assign_pointer(nf_conntrack_event_cb, new);
+	mutex_unlock(&nf_ct_ecache_mutex);
+	return ret;
+
+out_unlock:
+	mutex_unlock(&nf_ct_ecache_mutex);
+	return ret;
 }
-EXPORT_SYMBOL_GPL(nf_ct_deliver_cached_events);
+EXPORT_SYMBOL_GPL(nf_conntrack_register_notifier);
 
-/* Deliver cached events for old pending events, if current conntrack != old */
-void __nf_ct_event_cache_init(struct nf_conn *ct)
+void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *new)
 {
-	struct net *net = nf_ct_net(ct);
-	struct nf_conntrack_ecache *ecache;
-
-	/* take care of delivering potentially old events */
-	ecache = per_cpu_ptr(net->ct.ecache, raw_smp_processor_id());
-	BUG_ON(ecache->ct == ct);
-	if (ecache->ct)
-		__nf_ct_deliver_cached_events(ecache);
-	/* initialize for this conntrack/packet */
-	ecache->ct = ct;
-	nf_conntrack_get(&ct->ct_general);
+	struct nf_ct_event_notifier *notify;
+
+	mutex_lock(&nf_ct_ecache_mutex);
+	notify = rcu_dereference(nf_conntrack_event_cb);
+	BUG_ON(notify != new);
+	rcu_assign_pointer(nf_conntrack_event_cb, NULL);
+	mutex_unlock(&nf_ct_ecache_mutex);
 }
-EXPORT_SYMBOL_GPL(__nf_ct_event_cache_init);
+EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier);
 
-/* flush the event cache - touches other CPU's data and must not be called
- * while packets are still passing through the code */
-void nf_ct_event_cache_flush(struct net *net)
+int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *new)
 {
-	struct nf_conntrack_ecache *ecache;
-	int cpu;
+	int ret = 0;
+	struct nf_exp_event_notifier *notify;
 
-	for_each_possible_cpu(cpu) {
-		ecache = per_cpu_ptr(net->ct.ecache, cpu);
-		if (ecache->ct)
-			nf_ct_put(ecache->ct);
+	mutex_lock(&nf_ct_ecache_mutex);
+	notify = rcu_dereference(nf_expect_event_cb);
+	if (notify != NULL) {
+		ret = -EBUSY;
+		goto out_unlock;
 	}
+	rcu_assign_pointer(nf_expect_event_cb, new);
+	mutex_unlock(&nf_ct_ecache_mutex);
+	return ret;
+
+out_unlock:
+	mutex_unlock(&nf_ct_ecache_mutex);
+	return ret;
 }
+EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier);
 
-int nf_conntrack_ecache_init(struct net *net)
+void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *new)
 {
-	net->ct.ecache = alloc_percpu(struct nf_conntrack_ecache);
-	if (!net->ct.ecache)
-		return -ENOMEM;
-	return 0;
+	struct nf_exp_event_notifier *notify;
+
+	mutex_lock(&nf_ct_ecache_mutex);
+	notify = rcu_dereference(nf_expect_event_cb);
+	BUG_ON(notify != new);
+	rcu_assign_pointer(nf_expect_event_cb, NULL);
+	mutex_unlock(&nf_ct_ecache_mutex);
 }
+EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier);
 
-void nf_conntrack_ecache_fini(struct net *net)
+#define NF_CT_EVENTS_DEFAULT 1
+static int nf_ct_events __read_mostly = NF_CT_EVENTS_DEFAULT;
+static int nf_ct_events_retry_timeout __read_mostly = 15*HZ;
+
+#ifdef CONFIG_SYSCTL
+static struct ctl_table event_sysctl_table[] = {
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "nf_conntrack_events",
+		.data		= &init_net.ct.sysctl_events,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "nf_conntrack_events_retry_timeout",
+		.data		= &init_net.ct.sysctl_events_retry_timeout,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_jiffies,
+	},
+	{}
+};
+#endif /* CONFIG_SYSCTL */
+
+static struct nf_ct_ext_type event_extend __read_mostly = {
+	.len	= sizeof(struct nf_conntrack_ecache),
+	.align	= __alignof__(struct nf_conntrack_ecache),
+	.id	= NF_CT_EXT_ECACHE,
+};
+
+#ifdef CONFIG_SYSCTL
+static int nf_conntrack_event_init_sysctl(struct net *net)
 {
-	free_percpu(net->ct.ecache);
+	struct ctl_table *table;
+
+	table = kmemdup(event_sysctl_table, sizeof(event_sysctl_table),
+			GFP_KERNEL);
+	if (!table)
+		goto out;
+
+	table[0].data = &net->ct.sysctl_events;
+	table[1].data = &net->ct.sysctl_events_retry_timeout;
+
+	net->ct.event_sysctl_header =
+		register_net_sysctl_table(net,
+					  nf_net_netfilter_sysctl_path, table);
+	if (!net->ct.event_sysctl_header) {
+		printk(KERN_ERR "nf_ct_event: can't register to sysctl.\n");
+		goto out_register;
+	}
+	return 0;
+
+out_register:
+	kfree(table);
+out:
+	return -ENOMEM;
 }
 
-int nf_conntrack_register_notifier(struct notifier_block *nb)
+static void nf_conntrack_event_fini_sysctl(struct net *net)
 {
-	return atomic_notifier_chain_register(&nf_conntrack_chain, nb);
+	struct ctl_table *table;
+
+	table = net->ct.event_sysctl_header->ctl_table_arg;
+	unregister_net_sysctl_table(net->ct.event_sysctl_header);
+	kfree(table);
+}
+#else
+static int nf_conntrack_event_init_sysctl(struct net *net)
+{
+	return 0;
 }
-EXPORT_SYMBOL_GPL(nf_conntrack_register_notifier);
 
-int nf_conntrack_unregister_notifier(struct notifier_block *nb)
+static void nf_conntrack_event_fini_sysctl(struct net *net)
 {
-	return atomic_notifier_chain_unregister(&nf_conntrack_chain, nb);
 }
-EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier);
+#endif /* CONFIG_SYSCTL */
 
-int nf_ct_expect_register_notifier(struct notifier_block *nb)
+int nf_conntrack_ecache_init(struct net *net)
 {
-	return atomic_notifier_chain_register(&nf_ct_expect_chain, nb);
+	int ret;
+
+	net->ct.sysctl_events = nf_ct_events;
+	net->ct.sysctl_events_retry_timeout = nf_ct_events_retry_timeout;
+
+	if (net_eq(net, &init_net)) {
+		ret = nf_ct_extend_register(&event_extend);
+		if (ret < 0) {
+			printk(KERN_ERR "nf_ct_event: Unable to register "
+					"event extension.\n");
+			goto out_extend_register;
+		}
+	}
+
+	ret = nf_conntrack_event_init_sysctl(net);
+	if (ret < 0)
+		goto out_sysctl;
+
+	return 0;
+
+out_sysctl:
+	if (net_eq(net, &init_net))
+		nf_ct_extend_unregister(&event_extend);
+out_extend_register:
+	return ret;
 }
-EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier);
 
-int nf_ct_expect_unregister_notifier(struct notifier_block *nb)
+void nf_conntrack_ecache_fini(struct net *net)
 {
-	return atomic_notifier_chain_unregister(&nf_ct_expect_chain, nb);
+	nf_conntrack_event_fini_sysctl(net);
+	if (net_eq(net, &init_net))
+		nf_ct_extend_unregister(&event_extend);
 }
-EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier);
diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index 00fecc385f9..5509dd1f14c 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -338,11 +338,9 @@ static void update_nl_seq(struct nf_conn *ct, u32 nl_seq,
 
 	if (info->seq_aft_nl_num[dir] < NUM_SEQ_TO_REMEMBER) {
 		info->seq_aft_nl[dir][info->seq_aft_nl_num[dir]++] = nl_seq;
-		nf_conntrack_event_cache(IPCT_HELPINFO_VOLATILE, ct);
 	} else if (oldest != NUM_SEQ_TO_REMEMBER &&
 		   after(nl_seq, info->seq_aft_nl[dir][oldest])) {
 		info->seq_aft_nl[dir][oldest] = nl_seq;
-		nf_conntrack_event_cache(IPCT_HELPINFO_VOLATILE, ct);
 	}
 }
 
diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c
index 0fa5a422959..65c2a7bc3af 100644
--- a/net/netfilter/nf_conntrack_helper.c
+++ b/net/netfilter/nf_conntrack_helper.c
@@ -136,6 +136,20 @@ static inline int unhelp(struct nf_conntrack_tuple_hash *i,
 	return 0;
 }
 
+void nf_ct_helper_destroy(struct nf_conn *ct)
+{
+	struct nf_conn_help *help = nfct_help(ct);
+	struct nf_conntrack_helper *helper;
+
+	if (help) {
+		rcu_read_lock();
+		helper = rcu_dereference(help->helper);
+		if (helper && helper->destroy)
+			helper->destroy(ct);
+		rcu_read_unlock();
+	}
+}
+
 int nf_conntrack_helper_register(struct nf_conntrack_helper *me)
 {
 	unsigned int h = helper_hash(&me->tuple);
diff --git a/net/netfilter/nf_conntrack_netbios_ns.c b/net/netfilter/nf_conntrack_netbios_ns.c
index 8a3875e36ec..497b2224536 100644
--- a/net/netfilter/nf_conntrack_netbios_ns.c
+++ b/net/netfilter/nf_conntrack_netbios_ns.c
@@ -48,7 +48,7 @@ static int help(struct sk_buff *skb, unsigned int protoff,
 {
 	struct nf_conntrack_expect *exp;
 	struct iphdr *iph = ip_hdr(skb);
-	struct rtable *rt = skb->rtable;
+	struct rtable *rt = skb_rtable(skb);
 	struct in_device *in_dev;
 	__be32 mask = 0;
 
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index c523f0b8cee..49479d19457 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -27,7 +27,6 @@
 #include <linux/netlink.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
-#include <linux/notifier.h>
 
 #include <linux/netfilter.h>
 #include <net/netlink.h>
@@ -144,7 +143,7 @@ nla_put_failure:
 }
 
 static inline int
-ctnetlink_dump_protoinfo(struct sk_buff *skb, const struct nf_conn *ct)
+ctnetlink_dump_protoinfo(struct sk_buff *skb, struct nf_conn *ct)
 {
 	struct nf_conntrack_l4proto *l4proto;
 	struct nlattr *nest_proto;
@@ -346,23 +345,21 @@ nla_put_failure:
 	return -1;
 }
 
-#define tuple(ct, dir) (&(ct)->tuplehash[dir].tuple)
-
 static int
 ctnetlink_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
-		    int event, int nowait,
-		    const struct nf_conn *ct)
+		    int event, struct nf_conn *ct)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
 	struct nlattr *nest_parms;
-	unsigned char *b = skb_tail_pointer(skb);
+	unsigned int flags = pid ? NLM_F_MULTI : 0;
 
 	event |= NFNL_SUBSYS_CTNETLINK << 8;
-	nlh    = NLMSG_PUT(skb, pid, seq, event, sizeof(struct nfgenmsg));
-	nfmsg  = NLMSG_DATA(nlh);
+	nlh = nlmsg_put(skb, pid, seq, event, sizeof(*nfmsg), flags);
+	if (nlh == NULL)
+		goto nlmsg_failure;
 
-	nlh->nlmsg_flags    = (nowait && pid) ? NLM_F_MULTI : 0;
+	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = nf_ct_l3num(ct);
 	nfmsg->version      = NFNETLINK_V0;
 	nfmsg->res_id	    = 0;
@@ -370,14 +367,14 @@ ctnetlink_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 	nest_parms = nla_nest_start(skb, CTA_TUPLE_ORIG | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
-	if (ctnetlink_dump_tuples(skb, tuple(ct, IP_CT_DIR_ORIGINAL)) < 0)
+	if (ctnetlink_dump_tuples(skb, nf_ct_tuple(ct, IP_CT_DIR_ORIGINAL)) < 0)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_parms);
 
 	nest_parms = nla_nest_start(skb, CTA_TUPLE_REPLY | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
-	if (ctnetlink_dump_tuples(skb, tuple(ct, IP_CT_DIR_REPLY)) < 0)
+	if (ctnetlink_dump_tuples(skb, nf_ct_tuple(ct, IP_CT_DIR_REPLY)) < 0)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_parms);
 
@@ -395,132 +392,109 @@ ctnetlink_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 	    ctnetlink_dump_nat_seq_adj(skb, ct) < 0)
 		goto nla_put_failure;
 
-	nlh->nlmsg_len = skb_tail_pointer(skb) - b;
+	nlmsg_end(skb, nlh);
 	return skb->len;
 
 nlmsg_failure:
 nla_put_failure:
-	nlmsg_trim(skb, b);
+	nlmsg_cancel(skb, nlh);
 	return -1;
 }
 
 #ifdef CONFIG_NF_CONNTRACK_EVENTS
-/*
- * The general structure of a ctnetlink event is
- *
- *  CTA_TUPLE_ORIG
- *    <l3/l4-proto-attributes>
- *  CTA_TUPLE_REPLY
- *    <l3/l4-proto-attributes>
- *  CTA_ID
- *  ...
- *  CTA_PROTOINFO
- *    <l4-proto-attributes>
- *  CTA_TUPLE_MASTER
- *    <l3/l4-proto-attributes>
- *
- * Therefore the formular is
- *
- *   size = sizeof(headers) + sizeof(generic_nlas) + 3 * sizeof(tuple_nlas)
- *		+ sizeof(protoinfo_nlas)
- */
-static struct sk_buff *
-ctnetlink_alloc_skb(const struct nf_conntrack_tuple *tuple, gfp_t gfp)
+static inline size_t
+ctnetlink_proto_size(const struct nf_conn *ct)
 {
 	struct nf_conntrack_l3proto *l3proto;
 	struct nf_conntrack_l4proto *l4proto;
-	int len;
-
-#define NLA_TYPE_SIZE(type)		nla_total_size(sizeof(type))
-
-	/* proto independant part */
-	len = NLMSG_SPACE(sizeof(struct nfgenmsg))
-		+ 3 * nla_total_size(0)		/* CTA_TUPLE_ORIG|REPL|MASTER */
-		+ 3 * nla_total_size(0)		/* CTA_TUPLE_IP */
-		+ 3 * nla_total_size(0)		/* CTA_TUPLE_PROTO */
-		+ 3 * NLA_TYPE_SIZE(u_int8_t)	/* CTA_PROTO_NUM */
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_ID */
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_STATUS */
+	size_t len = 0;
+
+	rcu_read_lock();
+	l3proto = __nf_ct_l3proto_find(nf_ct_l3num(ct));
+	len += l3proto->nla_size;
+
+	l4proto = __nf_ct_l4proto_find(nf_ct_l3num(ct), nf_ct_protonum(ct));
+	len += l4proto->nla_size;
+	rcu_read_unlock();
+
+	return len;
+}
+
+static inline size_t
+ctnetlink_nlmsg_size(const struct nf_conn *ct)
+{
+	return NLMSG_ALIGN(sizeof(struct nfgenmsg))
+	       + 3 * nla_total_size(0) /* CTA_TUPLE_ORIG|REPL|MASTER */
+	       + 3 * nla_total_size(0) /* CTA_TUPLE_IP */
+	       + 3 * nla_total_size(0) /* CTA_TUPLE_PROTO */
+	       + 3 * nla_total_size(sizeof(u_int8_t)) /* CTA_PROTO_NUM */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_ID */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_STATUS */
 #ifdef CONFIG_NF_CT_ACCT
-		+ 2 * nla_total_size(0)		/* CTA_COUNTERS_ORIG|REPL */
-		+ 2 * NLA_TYPE_SIZE(uint64_t)	/* CTA_COUNTERS_PACKETS */
-		+ 2 * NLA_TYPE_SIZE(uint64_t)	/* CTA_COUNTERS_BYTES */
+	       + 2 * nla_total_size(0) /* CTA_COUNTERS_ORIG|REPL */
+	       + 2 * nla_total_size(sizeof(uint64_t)) /* CTA_COUNTERS_PACKETS */
+	       + 2 * nla_total_size(sizeof(uint64_t)) /* CTA_COUNTERS_BYTES */
 #endif
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_TIMEOUT */
-		+ nla_total_size(0)		/* CTA_PROTOINFO */
-		+ nla_total_size(0)		/* CTA_HELP */
-		+ nla_total_size(NF_CT_HELPER_NAME_LEN)	/* CTA_HELP_NAME */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_TIMEOUT */
+	       + nla_total_size(0) /* CTA_PROTOINFO */
+	       + nla_total_size(0) /* CTA_HELP */
+	       + nla_total_size(NF_CT_HELPER_NAME_LEN) /* CTA_HELP_NAME */
 #ifdef CONFIG_NF_CONNTRACK_SECMARK
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_SECMARK */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_SECMARK */
 #endif
 #ifdef CONFIG_NF_NAT_NEEDED
-		+ 2 * nla_total_size(0)		/* CTA_NAT_SEQ_ADJ_ORIG|REPL */
-		+ 2 * NLA_TYPE_SIZE(u_int32_t)	/* CTA_NAT_SEQ_CORRECTION_POS */
-		+ 2 * NLA_TYPE_SIZE(u_int32_t)	/* CTA_NAT_SEQ_CORRECTION_BEFORE */
-		+ 2 * NLA_TYPE_SIZE(u_int32_t)	/* CTA_NAT_SEQ_CORRECTION_AFTER */
+	       + 2 * nla_total_size(0) /* CTA_NAT_SEQ_ADJ_ORIG|REPL */
+	       + 6 * nla_total_size(sizeof(u_int32_t)) /* CTA_NAT_SEQ_OFFSET */
 #endif
 #ifdef CONFIG_NF_CONNTRACK_MARK
-		+ NLA_TYPE_SIZE(u_int32_t)	/* CTA_MARK */
+	       + nla_total_size(sizeof(u_int32_t)) /* CTA_MARK */
 #endif
-		;
-
-#undef NLA_TYPE_SIZE
-
-	rcu_read_lock();
-	l3proto = __nf_ct_l3proto_find(tuple->src.l3num);
-	len += l3proto->nla_size;
-
-	l4proto = __nf_ct_l4proto_find(tuple->src.l3num, tuple->dst.protonum);
-	len += l4proto->nla_size;
-	rcu_read_unlock();
-
-	return alloc_skb(len, gfp);
+	       + ctnetlink_proto_size(ct)
+	       ;
 }
 
-static int ctnetlink_conntrack_event(struct notifier_block *this,
-				     unsigned long events, void *ptr)
+static int
+ctnetlink_conntrack_event(unsigned int events, struct nf_ct_event *item)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
 	struct nlattr *nest_parms;
-	struct nf_ct_event *item = (struct nf_ct_event *)ptr;
 	struct nf_conn *ct = item->ct;
 	struct sk_buff *skb;
 	unsigned int type;
-	sk_buff_data_t b;
 	unsigned int flags = 0, group;
+	int err;
 
 	/* ignore our fake conntrack entry */
 	if (ct == &nf_conntrack_untracked)
-		return NOTIFY_DONE;
+		return 0;
 
-	if (events & IPCT_DESTROY) {
+	if (events & (1 << IPCT_DESTROY)) {
 		type = IPCTNL_MSG_CT_DELETE;
 		group = NFNLGRP_CONNTRACK_DESTROY;
-	} else  if (events & (IPCT_NEW | IPCT_RELATED)) {
+	} else  if (events & ((1 << IPCT_NEW) | (1 << IPCT_RELATED))) {
 		type = IPCTNL_MSG_CT_NEW;
 		flags = NLM_F_CREATE|NLM_F_EXCL;
 		group = NFNLGRP_CONNTRACK_NEW;
-	} else  if (events & (IPCT_STATUS | IPCT_PROTOINFO)) {
+	} else  if (events) {
 		type = IPCTNL_MSG_CT_NEW;
 		group = NFNLGRP_CONNTRACK_UPDATE;
 	} else
-		return NOTIFY_DONE;
+		return 0;
 
 	if (!item->report && !nfnetlink_has_listeners(group))
-		return NOTIFY_DONE;
+		return 0;
 
-	skb = ctnetlink_alloc_skb(tuple(ct, IP_CT_DIR_ORIGINAL), GFP_ATOMIC);
-	if (!skb)
+	skb = nlmsg_new(ctnetlink_nlmsg_size(ct), GFP_ATOMIC);
+	if (skb == NULL)
 		goto errout;
 
-	b = skb->tail;
-
 	type |= NFNL_SUBSYS_CTNETLINK << 8;
-	nlh   = NLMSG_PUT(skb, item->pid, 0, type, sizeof(struct nfgenmsg));
-	nfmsg = NLMSG_DATA(nlh);
+	nlh = nlmsg_put(skb, item->pid, 0, type, sizeof(*nfmsg), flags);
+	if (nlh == NULL)
+		goto nlmsg_failure;
 
-	nlh->nlmsg_flags    = flags;
+	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = nf_ct_l3num(ct);
 	nfmsg->version	= NFNETLINK_V0;
 	nfmsg->res_id	= 0;
@@ -529,14 +503,14 @@ static int ctnetlink_conntrack_event(struct notifier_block *this,
 	nest_parms = nla_nest_start(skb, CTA_TUPLE_ORIG | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
-	if (ctnetlink_dump_tuples(skb, tuple(ct, IP_CT_DIR_ORIGINAL)) < 0)
+	if (ctnetlink_dump_tuples(skb, nf_ct_tuple(ct, IP_CT_DIR_ORIGINAL)) < 0)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_parms);
 
 	nest_parms = nla_nest_start(skb, CTA_TUPLE_REPLY | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
-	if (ctnetlink_dump_tuples(skb, tuple(ct, IP_CT_DIR_REPLY)) < 0)
+	if (ctnetlink_dump_tuples(skb, nf_ct_tuple(ct, IP_CT_DIR_REPLY)) < 0)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest_parms);
 
@@ -546,7 +520,7 @@ static int ctnetlink_conntrack_event(struct notifier_block *this,
 	if (ctnetlink_dump_status(skb, ct) < 0)
 		goto nla_put_failure;
 
-	if (events & IPCT_DESTROY) {
+	if (events & (1 << IPCT_DESTROY)) {
 		if (ctnetlink_dump_counters(skb, ct, IP_CT_DIR_ORIGINAL) < 0 ||
 		    ctnetlink_dump_counters(skb, ct, IP_CT_DIR_REPLY) < 0)
 			goto nla_put_failure;
@@ -554,47 +528,51 @@ static int ctnetlink_conntrack_event(struct notifier_block *this,
 		if (ctnetlink_dump_timeout(skb, ct) < 0)
 			goto nla_put_failure;
 
-		if (events & IPCT_PROTOINFO
+		if (events & (1 << IPCT_PROTOINFO)
 		    && ctnetlink_dump_protoinfo(skb, ct) < 0)
 			goto nla_put_failure;
 
-		if ((events & IPCT_HELPER || nfct_help(ct))
+		if ((events & (1 << IPCT_HELPER) || nfct_help(ct))
 		    && ctnetlink_dump_helpinfo(skb, ct) < 0)
 			goto nla_put_failure;
 
 #ifdef CONFIG_NF_CONNTRACK_SECMARK
-		if ((events & IPCT_SECMARK || ct->secmark)
+		if ((events & (1 << IPCT_SECMARK) || ct->secmark)
 		    && ctnetlink_dump_secmark(skb, ct) < 0)
 			goto nla_put_failure;
 #endif
 
-		if (events & IPCT_RELATED &&
+		if (events & (1 << IPCT_RELATED) &&
 		    ctnetlink_dump_master(skb, ct) < 0)
 			goto nla_put_failure;
 
-		if (events & IPCT_NATSEQADJ &&
+		if (events & (1 << IPCT_NATSEQADJ) &&
 		    ctnetlink_dump_nat_seq_adj(skb, ct) < 0)
 			goto nla_put_failure;
 	}
 
 #ifdef CONFIG_NF_CONNTRACK_MARK
-	if ((events & IPCT_MARK || ct->mark)
+	if ((events & (1 << IPCT_MARK) || ct->mark)
 	    && ctnetlink_dump_mark(skb, ct) < 0)
 		goto nla_put_failure;
 #endif
 	rcu_read_unlock();
 
-	nlh->nlmsg_len = skb->tail - b;
-	nfnetlink_send(skb, item->pid, group, item->report);
-	return NOTIFY_DONE;
+	nlmsg_end(skb, nlh);
+	err = nfnetlink_send(skb, item->pid, group, item->report, GFP_ATOMIC);
+	if (err == -ENOBUFS || err == -EAGAIN)
+		return -ENOBUFS;
+
+	return 0;
 
 nla_put_failure:
 	rcu_read_unlock();
+	nlmsg_cancel(skb, nlh);
 nlmsg_failure:
 	kfree_skb(skb);
 errout:
 	nfnetlink_set_err(0, group, -ENOBUFS);
-	return NOTIFY_DONE;
+	return 0;
 }
 #endif /* CONFIG_NF_CONNTRACK_EVENTS */
 
@@ -611,7 +589,7 @@ ctnetlink_dump_table(struct sk_buff *skb, struct netlink_callback *cb)
 	struct nf_conn *ct, *last;
 	struct nf_conntrack_tuple_hash *h;
 	struct hlist_nulls_node *n;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(cb->nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(cb->nlh);
 	u_int8_t l3proto = nfmsg->nfgen_family;
 
 	rcu_read_lock();
@@ -637,8 +615,7 @@ restart:
 			}
 			if (ctnetlink_fill_info(skb, NETLINK_CB(cb->skb).pid,
 						cb->nlh->nlmsg_seq,
-						IPCTNL_MSG_CT_NEW,
-						1, ct) < 0) {
+						IPCTNL_MSG_CT_NEW, ct) < 0) {
 				cb->args[1] = (unsigned long)ct;
 				goto out;
 			}
@@ -792,7 +769,7 @@ ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple_hash *h;
 	struct nf_conntrack_tuple tuple;
 	struct nf_conn *ct;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -802,9 +779,9 @@ ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb,
 		err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_REPLY, u3);
 	else {
 		/* Flush the whole table */
-		nf_conntrack_flush(&init_net, 
-				   NETLINK_CB(skb).pid, 
-				   nlmsg_report(nlh));
+		nf_conntrack_flush_report(&init_net,
+					 NETLINK_CB(skb).pid,
+					 nlmsg_report(nlh));
 		return 0;
 	}
 
@@ -825,10 +802,15 @@ ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb,
 		}
 	}
 
-	nf_conntrack_event_report(IPCT_DESTROY,
-				  ct,
-				  NETLINK_CB(skb).pid,
-				  nlmsg_report(nlh));
+	if (nf_conntrack_event_report(IPCT_DESTROY, ct,
+				      NETLINK_CB(skb).pid,
+				      nlmsg_report(nlh)) < 0) {
+		nf_ct_delete_from_lists(ct);
+		/* we failed to report the event, try later */
+		nf_ct_insert_dying_list(ct);
+		nf_ct_put(ct);
+		return 0;
+	}
 
 	/* death_by_timeout would report the event again */
 	set_bit(IPS_DYING_BIT, &ct->status);
@@ -847,7 +829,7 @@ ctnetlink_get_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple tuple;
 	struct nf_conn *ct;
 	struct sk_buff *skb2 = NULL;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -872,15 +854,15 @@ ctnetlink_get_conntrack(struct sock *ctnl, struct sk_buff *skb,
 	ct = nf_ct_tuplehash_to_ctrack(h);
 
 	err = -ENOMEM;
-	skb2 = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-	if (!skb2) {
+	skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (skb2 == NULL) {
 		nf_ct_put(ct);
 		return -ENOMEM;
 	}
 
 	rcu_read_lock();
 	err = ctnetlink_fill_info(skb2, NETLINK_CB(skb).pid, nlh->nlmsg_seq,
-				  IPCTNL_MSG_CT_NEW, 1, ct);
+				  IPCTNL_MSG_CT_NEW, ct);
 	rcu_read_unlock();
 	nf_ct_put(ct);
 	if (err <= 0)
@@ -1280,6 +1262,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 	}
 
 	nf_ct_acct_ext_add(ct, GFP_ATOMIC);
+	nf_ct_ecache_ext_add(ct, GFP_ATOMIC);
 
 #if defined(CONFIG_NF_CONNTRACK_MARK)
 	if (cda[CTA_MARK])
@@ -1325,7 +1308,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 {
 	struct nf_conntrack_tuple otuple, rtuple;
 	struct nf_conntrack_tuple_hash *h = NULL;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -1367,13 +1350,13 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 			else
 				events = IPCT_NEW;
 
-			nf_conntrack_event_report(IPCT_STATUS |
-						  IPCT_HELPER |
-						  IPCT_PROTOINFO |
-						  IPCT_NATSEQADJ |
-						  IPCT_MARK | events,
-						  ct, NETLINK_CB(skb).pid,
-						  nlmsg_report(nlh));
+			nf_conntrack_eventmask_report((1 << IPCT_STATUS) |
+						      (1 << IPCT_HELPER) |
+						      (1 << IPCT_PROTOINFO) |
+						      (1 << IPCT_NATSEQADJ) |
+						      (1 << IPCT_MARK) | events,
+						      ct, NETLINK_CB(skb).pid,
+						      nlmsg_report(nlh));
 			nf_ct_put(ct);
 		} else
 			spin_unlock_bh(&nf_conntrack_lock);
@@ -1392,13 +1375,13 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 		if (err == 0) {
 			nf_conntrack_get(&ct->ct_general);
 			spin_unlock_bh(&nf_conntrack_lock);
-			nf_conntrack_event_report(IPCT_STATUS |
-						  IPCT_HELPER |
-						  IPCT_PROTOINFO |
-						  IPCT_NATSEQADJ |
-						  IPCT_MARK,
-						  ct, NETLINK_CB(skb).pid,
-						  nlmsg_report(nlh));
+			nf_conntrack_eventmask_report((1 << IPCT_STATUS) |
+						      (1 << IPCT_HELPER) |
+						      (1 << IPCT_PROTOINFO) |
+						      (1 << IPCT_NATSEQADJ) |
+						      (1 << IPCT_MARK),
+						      ct, NETLINK_CB(skb).pid,
+						      nlmsg_report(nlh));
 			nf_ct_put(ct);
 		} else
 			spin_unlock_bh(&nf_conntrack_lock);
@@ -1503,19 +1486,18 @@ nla_put_failure:
 
 static int
 ctnetlink_exp_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
-		    int event,
-		    int nowait,
-		    const struct nf_conntrack_expect *exp)
+			int event, const struct nf_conntrack_expect *exp)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
-	unsigned char *b = skb_tail_pointer(skb);
+	unsigned int flags = pid ? NLM_F_MULTI : 0;
 
 	event |= NFNL_SUBSYS_CTNETLINK_EXP << 8;
-	nlh    = NLMSG_PUT(skb, pid, seq, event, sizeof(struct nfgenmsg));
-	nfmsg  = NLMSG_DATA(nlh);
+	nlh = nlmsg_put(skb, pid, seq, event, sizeof(*nfmsg), flags);
+	if (nlh == NULL)
+		goto nlmsg_failure;
 
-	nlh->nlmsg_flags    = (nowait && pid) ? NLM_F_MULTI : 0;
+	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = exp->tuple.src.l3num;
 	nfmsg->version	    = NFNETLINK_V0;
 	nfmsg->res_id	    = 0;
@@ -1523,49 +1505,46 @@ ctnetlink_exp_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 	if (ctnetlink_exp_dump_expect(skb, exp) < 0)
 		goto nla_put_failure;
 
-	nlh->nlmsg_len = skb_tail_pointer(skb) - b;
+	nlmsg_end(skb, nlh);
 	return skb->len;
 
 nlmsg_failure:
 nla_put_failure:
-	nlmsg_trim(skb, b);
+	nlmsg_cancel(skb, nlh);
 	return -1;
 }
 
 #ifdef CONFIG_NF_CONNTRACK_EVENTS
-static int ctnetlink_expect_event(struct notifier_block *this,
-				  unsigned long events, void *ptr)
+static int
+ctnetlink_expect_event(unsigned int events, struct nf_exp_event *item)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
-	struct nf_exp_event *item = (struct nf_exp_event *)ptr;
 	struct nf_conntrack_expect *exp = item->exp;
 	struct sk_buff *skb;
 	unsigned int type;
-	sk_buff_data_t b;
 	int flags = 0;
 
-	if (events & IPEXP_NEW) {
+	if (events & (1 << IPEXP_NEW)) {
 		type = IPCTNL_MSG_EXP_NEW;
 		flags = NLM_F_CREATE|NLM_F_EXCL;
 	} else
-		return NOTIFY_DONE;
+		return 0;
 
 	if (!item->report &&
 	    !nfnetlink_has_listeners(NFNLGRP_CONNTRACK_EXP_NEW))
-		return NOTIFY_DONE;
+		return 0;
 
-	skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC);
-	if (!skb)
+	skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (skb == NULL)
 		goto errout;
 
-	b = skb->tail;
-
 	type |= NFNL_SUBSYS_CTNETLINK_EXP << 8;
-	nlh   = NLMSG_PUT(skb, item->pid, 0, type, sizeof(struct nfgenmsg));
-	nfmsg = NLMSG_DATA(nlh);
+	nlh = nlmsg_put(skb, item->pid, 0, type, sizeof(*nfmsg), flags);
+	if (nlh == NULL)
+		goto nlmsg_failure;
 
-	nlh->nlmsg_flags    = flags;
+	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = exp->tuple.src.l3num;
 	nfmsg->version	    = NFNETLINK_V0;
 	nfmsg->res_id	    = 0;
@@ -1575,17 +1554,19 @@ static int ctnetlink_expect_event(struct notifier_block *this,
 		goto nla_put_failure;
 	rcu_read_unlock();
 
-	nlh->nlmsg_len = skb->tail - b;
-	nfnetlink_send(skb, item->pid, NFNLGRP_CONNTRACK_EXP_NEW, item->report);
-	return NOTIFY_DONE;
+	nlmsg_end(skb, nlh);
+	nfnetlink_send(skb, item->pid, NFNLGRP_CONNTRACK_EXP_NEW,
+		       item->report, GFP_ATOMIC);
+	return 0;
 
 nla_put_failure:
 	rcu_read_unlock();
+	nlmsg_cancel(skb, nlh);
 nlmsg_failure:
 	kfree_skb(skb);
 errout:
 	nfnetlink_set_err(0, 0, -ENOBUFS);
-	return NOTIFY_DONE;
+	return 0;
 }
 #endif
 static int ctnetlink_exp_done(struct netlink_callback *cb)
@@ -1600,7 +1581,7 @@ ctnetlink_exp_dump_table(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct net *net = &init_net;
 	struct nf_conntrack_expect *exp, *last;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(cb->nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(cb->nlh);
 	struct hlist_node *n;
 	u_int8_t l3proto = nfmsg->nfgen_family;
 
@@ -1617,10 +1598,11 @@ restart:
 					continue;
 				cb->args[1] = 0;
 			}
-			if (ctnetlink_exp_fill_info(skb, NETLINK_CB(cb->skb).pid,
+			if (ctnetlink_exp_fill_info(skb,
+						    NETLINK_CB(cb->skb).pid,
 						    cb->nlh->nlmsg_seq,
 						    IPCTNL_MSG_EXP_NEW,
-						    1, exp) < 0) {
+						    exp) < 0) {
 				if (!atomic_inc_not_zero(&exp->use))
 					continue;
 				cb->args[1] = (unsigned long)exp;
@@ -1652,7 +1634,7 @@ ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_tuple tuple;
 	struct nf_conntrack_expect *exp;
 	struct sk_buff *skb2;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -1683,14 +1665,13 @@ ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb,
 	}
 
 	err = -ENOMEM;
-	skb2 = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-	if (!skb2)
+	skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (skb2 == NULL)
 		goto out;
 
 	rcu_read_lock();
 	err = ctnetlink_exp_fill_info(skb2, NETLINK_CB(skb).pid,
-				      nlh->nlmsg_seq, IPCTNL_MSG_EXP_NEW,
-				      1, exp);
+				      nlh->nlmsg_seq, IPCTNL_MSG_EXP_NEW, exp);
 	rcu_read_unlock();
 	if (err <= 0)
 		goto free;
@@ -1713,7 +1694,7 @@ ctnetlink_del_expect(struct sock *ctnl, struct sk_buff *skb,
 	struct nf_conntrack_expect *exp;
 	struct nf_conntrack_tuple tuple;
 	struct nf_conntrack_helper *h;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	struct hlist_node *n, *next;
 	u_int8_t u3 = nfmsg->nfgen_family;
 	unsigned int i;
@@ -1854,7 +1835,7 @@ ctnetlink_new_expect(struct sock *ctnl, struct sk_buff *skb,
 {
 	struct nf_conntrack_tuple tuple;
 	struct nf_conntrack_expect *exp;
-	struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
 	u_int8_t u3 = nfmsg->nfgen_family;
 	int err = 0;
 
@@ -1891,12 +1872,12 @@ ctnetlink_new_expect(struct sock *ctnl, struct sk_buff *skb,
 }
 
 #ifdef CONFIG_NF_CONNTRACK_EVENTS
-static struct notifier_block ctnl_notifier = {
-	.notifier_call	= ctnetlink_conntrack_event,
+static struct nf_ct_event_notifier ctnl_notifier = {
+	.fcn = ctnetlink_conntrack_event,
 };
 
-static struct notifier_block ctnl_notifier_exp = {
-	.notifier_call	= ctnetlink_expect_event,
+static struct nf_exp_event_notifier ctnl_notifier_exp = {
+	.fcn = ctnetlink_expect_event,
 };
 #endif
 
diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c
index aee0d6bea30..1b816a2ea81 100644
--- a/net/netfilter/nf_conntrack_proto_dccp.c
+++ b/net/netfilter/nf_conntrack_proto_dccp.c
@@ -25,8 +25,6 @@
 #include <net/netfilter/nf_conntrack_ecache.h>
 #include <net/netfilter/nf_log.h>
 
-static DEFINE_RWLOCK(dccp_lock);
-
 /* Timeouts are based on values from RFC4340:
  *
  * - REQUEST:
@@ -492,7 +490,7 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb,
 		return NF_ACCEPT;
 	}
 
-	write_lock_bh(&dccp_lock);
+	spin_lock_bh(&ct->lock);
 
 	role = ct->proto.dccp.role[dir];
 	old_state = ct->proto.dccp.state;
@@ -536,13 +534,13 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb,
 		ct->proto.dccp.last_dir = dir;
 		ct->proto.dccp.last_pkt = type;
 
-		write_unlock_bh(&dccp_lock);
+		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_DCCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 				      "nf_ct_dccp: invalid packet ignored ");
 		return NF_ACCEPT;
 	case CT_DCCP_INVALID:
-		write_unlock_bh(&dccp_lock);
+		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_DCCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 				      "nf_ct_dccp: invalid state transition ");
@@ -552,7 +550,7 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb,
 	ct->proto.dccp.last_dir = dir;
 	ct->proto.dccp.last_pkt = type;
 	ct->proto.dccp.state = new_state;
-	write_unlock_bh(&dccp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	if (new_state != old_state)
 		nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
@@ -621,36 +619,39 @@ static int dccp_print_tuple(struct seq_file *s,
 			  ntohs(tuple->dst.u.dccp.port));
 }
 
-static int dccp_print_conntrack(struct seq_file *s, const struct nf_conn *ct)
+static int dccp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 {
 	return seq_printf(s, "%s ", dccp_state_names[ct->proto.dccp.state]);
 }
 
 #if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE)
 static int dccp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
-			  const struct nf_conn *ct)
+			  struct nf_conn *ct)
 {
 	struct nlattr *nest_parms;
 
-	read_lock_bh(&dccp_lock);
+	spin_lock_bh(&ct->lock);
 	nest_parms = nla_nest_start(skb, CTA_PROTOINFO_DCCP | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
 	NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_STATE, ct->proto.dccp.state);
 	NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_ROLE,
 		   ct->proto.dccp.role[IP_CT_DIR_ORIGINAL]);
+	NLA_PUT_BE64(skb, CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ,
+		     cpu_to_be64(ct->proto.dccp.handshake_seq));
 	nla_nest_end(skb, nest_parms);
-	read_unlock_bh(&dccp_lock);
+	spin_unlock_bh(&ct->lock);
 	return 0;
 
 nla_put_failure:
-	read_unlock_bh(&dccp_lock);
+	spin_unlock_bh(&ct->lock);
 	return -1;
 }
 
 static const struct nla_policy dccp_nla_policy[CTA_PROTOINFO_DCCP_MAX + 1] = {
 	[CTA_PROTOINFO_DCCP_STATE]	= { .type = NLA_U8 },
 	[CTA_PROTOINFO_DCCP_ROLE]	= { .type = NLA_U8 },
+	[CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ] = { .type = NLA_U64 },
 };
 
 static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
@@ -674,7 +675,7 @@ static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
 		return -EINVAL;
 	}
 
-	write_lock_bh(&dccp_lock);
+	spin_lock_bh(&ct->lock);
 	ct->proto.dccp.state = nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]);
 	if (nla_get_u8(tb[CTA_PROTOINFO_DCCP_ROLE]) == CT_DCCP_ROLE_CLIENT) {
 		ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_CLIENT;
@@ -683,7 +684,11 @@ static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
 		ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_SERVER;
 		ct->proto.dccp.role[IP_CT_DIR_REPLY] = CT_DCCP_ROLE_CLIENT;
 	}
-	write_unlock_bh(&dccp_lock);
+	if (tb[CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ]) {
+		ct->proto.dccp.handshake_seq =
+		be64_to_cpu(nla_get_be64(tb[CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ]));
+	}
+	spin_unlock_bh(&ct->lock);
 	return 0;
 }
 
diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index 117b80112fc..a54a0af0edb 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -176,7 +176,7 @@ static bool gre_invert_tuple(struct nf_conntrack_tuple *tuple,
 static bool gre_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff,
 			     struct nf_conntrack_tuple *tuple)
 {
-	struct net *net = dev_net(skb->dev ? skb->dev : skb->dst->dev);
+	struct net *net = dev_net(skb->dev ? skb->dev : skb_dst(skb)->dev);
 	const struct gre_hdr_pptp *pgrehdr;
 	struct gre_hdr_pptp _pgrehdr;
 	__be16 srckey;
@@ -219,8 +219,7 @@ static int gre_print_tuple(struct seq_file *s,
 }
 
 /* print private data for conntrack */
-static int gre_print_conntrack(struct seq_file *s,
-			       const struct nf_conn *ct)
+static int gre_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 {
 	return seq_printf(s, "timeout=%u, stream_timeout=%u ",
 			  (ct->proto.gre.timeout / HZ),
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index 101b4ad9e81..c10e6f36e31 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -25,9 +25,6 @@
 #include <net/netfilter/nf_conntrack_l4proto.h>
 #include <net/netfilter/nf_conntrack_ecache.h>
 
-/* Protects ct->proto.sctp */
-static DEFINE_RWLOCK(sctp_lock);
-
 /* FIXME: Examine ipfilter's timeouts and conntrack transitions more
    closely.  They're more complex. --RR
 
@@ -164,13 +161,13 @@ static int sctp_print_tuple(struct seq_file *s,
 }
 
 /* Print out the private part of the conntrack. */
-static int sctp_print_conntrack(struct seq_file *s, const struct nf_conn *ct)
+static int sctp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 {
 	enum sctp_conntrack state;
 
-	read_lock_bh(&sctp_lock);
+	spin_lock_bh(&ct->lock);
 	state = ct->proto.sctp.state;
-	read_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	return seq_printf(s, "%s ", sctp_conntrack_names[state]);
 }
@@ -318,7 +315,7 @@ static int sctp_packet(struct nf_conn *ct,
 	}
 
 	old_state = new_state = SCTP_CONNTRACK_NONE;
-	write_lock_bh(&sctp_lock);
+	spin_lock_bh(&ct->lock);
 	for_each_sctp_chunk (skb, sch, _sch, offset, dataoff, count) {
 		/* Special cases of Verification tag check (Sec 8.5.1) */
 		if (sch->type == SCTP_CID_INIT) {
@@ -371,7 +368,7 @@ static int sctp_packet(struct nf_conn *ct,
 		if (old_state != new_state)
 			nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
 	}
-	write_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	nf_ct_refresh_acct(ct, ctinfo, skb, sctp_timeouts[new_state]);
 
@@ -386,7 +383,7 @@ static int sctp_packet(struct nf_conn *ct,
 	return NF_ACCEPT;
 
 out_unlock:
-	write_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 out:
 	return -NF_ACCEPT;
 }
@@ -469,11 +466,11 @@ static bool sctp_new(struct nf_conn *ct, const struct sk_buff *skb,
 #include <linux/netfilter/nfnetlink_conntrack.h>
 
 static int sctp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
-			  const struct nf_conn *ct)
+			  struct nf_conn *ct)
 {
 	struct nlattr *nest_parms;
 
-	read_lock_bh(&sctp_lock);
+	spin_lock_bh(&ct->lock);
 	nest_parms = nla_nest_start(skb, CTA_PROTOINFO_SCTP | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
@@ -488,14 +485,14 @@ static int sctp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
 		     CTA_PROTOINFO_SCTP_VTAG_REPLY,
 		     ct->proto.sctp.vtag[IP_CT_DIR_REPLY]);
 
-	read_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	nla_nest_end(skb, nest_parms);
 
 	return 0;
 
 nla_put_failure:
-	read_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 	return -1;
 }
 
@@ -527,13 +524,13 @@ static int nlattr_to_sctp(struct nlattr *cda[], struct nf_conn *ct)
 	    !tb[CTA_PROTOINFO_SCTP_VTAG_REPLY])
 		return -EINVAL;
 
-	write_lock_bh(&sctp_lock);
+	spin_lock_bh(&ct->lock);
 	ct->proto.sctp.state = nla_get_u8(tb[CTA_PROTOINFO_SCTP_STATE]);
 	ct->proto.sctp.vtag[IP_CT_DIR_ORIGINAL] =
 		nla_get_be32(tb[CTA_PROTOINFO_SCTP_VTAG_ORIGINAL]);
 	ct->proto.sctp.vtag[IP_CT_DIR_REPLY] =
 		nla_get_be32(tb[CTA_PROTOINFO_SCTP_VTAG_REPLY]);
-	write_unlock_bh(&sctp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	return 0;
 }
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 97a6e93d742..33fc0a443f3 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -29,9 +29,6 @@
 #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
 #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
 
-/* Protects ct->proto.tcp */
-static DEFINE_RWLOCK(tcp_lock);
-
 /* "Be conservative in what you do,
     be liberal in what you accept from others."
     If it's non-zero, we mark only out of window RST segments as INVALID. */
@@ -59,7 +56,7 @@ static const char *const tcp_conntrack_names[] = {
 	"LAST_ACK",
 	"TIME_WAIT",
 	"CLOSE",
-	"LISTEN"
+	"SYN_SENT2",
 };
 
 #define SECS * HZ
@@ -82,6 +79,7 @@ static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = {
 	[TCP_CONNTRACK_LAST_ACK]	= 30 SECS,
 	[TCP_CONNTRACK_TIME_WAIT]	= 2 MINS,
 	[TCP_CONNTRACK_CLOSE]		= 10 SECS,
+	[TCP_CONNTRACK_SYN_SENT2]	= 2 MINS,
 };
 
 #define sNO TCP_CONNTRACK_NONE
@@ -93,7 +91,7 @@ static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = {
 #define sLA TCP_CONNTRACK_LAST_ACK
 #define sTW TCP_CONNTRACK_TIME_WAIT
 #define sCL TCP_CONNTRACK_CLOSE
-#define sLI TCP_CONNTRACK_LISTEN
+#define sS2 TCP_CONNTRACK_SYN_SENT2
 #define sIV TCP_CONNTRACK_MAX
 #define sIG TCP_CONNTRACK_IGNORE
 
@@ -123,6 +121,7 @@ enum tcp_bit_set {
  *
  * NONE:	initial state
  * SYN_SENT:	SYN-only packet seen
+ * SYN_SENT2:	SYN-only packet seen from reply dir, simultaneous open
  * SYN_RECV:	SYN-ACK packet seen
  * ESTABLISHED:	ACK packet seen
  * FIN_WAIT:	FIN packet seen
@@ -131,26 +130,24 @@ enum tcp_bit_set {
  * TIME_WAIT:	last ACK seen
  * CLOSE:	closed connection (RST)
  *
- * LISTEN state is not used.
- *
  * Packets marked as IGNORED (sIG):
  *	if they may be either invalid or valid
  *	and the receiver may send back a connection
  *	closing RST or a SYN/ACK.
  *
  * Packets marked as INVALID (sIV):
- *	if they are invalid
- *	or we do not support the request (simultaneous open)
+ *	if we regard them as truly invalid packets
  */
 static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
 	{
 /* ORIGINAL */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*syn*/	   { sSS, sSS, sIG, sIG, sIG, sIG, sIG, sSS, sSS, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*syn*/	   { sSS, sSS, sIG, sIG, sIG, sIG, sIG, sSS, sSS, sS2 },
 /*
  *	sNO -> sSS	Initialize a new connection
  *	sSS -> sSS	Retransmitted SYN
- *	sSR -> sIG	Late retransmitted SYN?
+ *	sS2 -> sS2	Late retransmitted SYN
+ *	sSR -> sIG
  *	sES -> sIG	Error: SYNs in window outside the SYN_SENT state
  *			are errors. Receiver will reply with RST
  *			and close the connection.
@@ -161,22 +158,30 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sSS	Reopened connection (RFC 1122).
  *	sCL -> sSS
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*synack*/ { sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*synack*/ { sIV, sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, sSR },
 /*
- * A SYN/ACK from the client is always invalid:
- *	- either it tries to set up a simultaneous open, which is
- *	  not supported;
- *	- or the firewall has just been inserted between the two hosts
- *	  during the session set-up. The SYN will be retransmitted
- *	  by the true client (or it'll time out).
+ *	sNO -> sIV	Too late and no reason to do anything
+ *	sSS -> sIV	Client can't send SYN and then SYN/ACK
+ *	sS2 -> sSR	SYN/ACK sent to SYN2 in simultaneous open
+ *	sSR -> sIG
+ *	sES -> sIG	Error: SYNs in window outside the SYN_SENT state
+ *			are errors. Receiver will reply with RST
+ *			and close the connection.
+ *			Or we are not in sync and hold a dead connection.
+ *	sFW -> sIG
+ *	sCW -> sIG
+ *	sLA -> sIG
+ *	sTW -> sIG
+ *	sCL -> sIG
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
 /*fin*/    { sIV, sIV, sFW, sFW, sLA, sLA, sLA, sTW, sCL, sIV },
 /*
  *	sNO -> sIV	Too late and no reason to do anything...
  *	sSS -> sIV	Client migth not send FIN in this state:
  *			we enforce waiting for a SYN/ACK reply first.
+ *	sS2 -> sIV
  *	sSR -> sFW	Close started.
  *	sES -> sFW
  *	sFW -> sLA	FIN seen in both directions, waiting for
@@ -187,11 +192,12 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sTW
  *	sCL -> sCL
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
 /*ack*/	   { sES, sIV, sES, sES, sCW, sCW, sTW, sTW, sCL, sIV },
 /*
  *	sNO -> sES	Assumed.
  *	sSS -> sIV	ACK is invalid: we haven't seen a SYN/ACK yet.
+ *	sS2 -> sIV
  *	sSR -> sES	Established state is reached.
  *	sES -> sES	:-)
  *	sFW -> sCW	Normal close request answered by ACK.
@@ -200,29 +206,31 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sTW	Retransmitted last ACK. Remain in the same state.
  *	sCL -> sCL
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*rst*/    { sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*rst*/    { sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL },
 /*none*/   { sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV }
 	},
 	{
 /* REPLY */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*syn*/	   { sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*syn*/	   { sIV, sS2, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sS2 },
 /*
  *	sNO -> sIV	Never reached.
- *	sSS -> sIV	Simultaneous open, not supported
- *	sSR -> sIV	Simultaneous open, not supported.
- *	sES -> sIV	Server may not initiate a connection.
+ *	sSS -> sS2	Simultaneous open
+ *	sS2 -> sS2	Retransmitted simultaneous SYN
+ *	sSR -> sIV	Invalid SYN packets sent by the server
+ *	sES -> sIV
  *	sFW -> sIV
  *	sCW -> sIV
  *	sLA -> sIV
  *	sTW -> sIV	Reopened connection, but server may not do it.
  *	sCL -> sIV
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*synack*/ { sIV, sSR, sSR, sIG, sIG, sIG, sIG, sIG, sIG, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*synack*/ { sIV, sSR, sSR, sIG, sIG, sIG, sIG, sIG, sIG, sSR },
 /*
  *	sSS -> sSR	Standard open.
+ *	sS2 -> sSR	Simultaneous open
  *	sSR -> sSR	Retransmitted SYN/ACK.
  *	sES -> sIG	Late retransmitted SYN/ACK?
  *	sFW -> sIG	Might be SYN/ACK answering ignored SYN
@@ -231,10 +239,11 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sIG
  *	sCL -> sIG
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
 /*fin*/    { sIV, sIV, sFW, sFW, sLA, sLA, sLA, sTW, sCL, sIV },
 /*
  *	sSS -> sIV	Server might not send FIN in this state.
+ *	sS2 -> sIV
  *	sSR -> sFW	Close started.
  *	sES -> sFW
  *	sFW -> sLA	FIN seen in both directions.
@@ -243,10 +252,11 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sTW
  *	sCL -> sCL
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*ack*/	   { sIV, sIG, sSR, sES, sCW, sCW, sTW, sTW, sCL, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*ack*/	   { sIV, sIG, sSR, sES, sCW, sCW, sTW, sTW, sCL, sIG },
 /*
  *	sSS -> sIG	Might be a half-open connection.
+ *	sS2 -> sIG
  *	sSR -> sSR	Might answer late resent SYN.
  *	sES -> sES	:-)
  *	sFW -> sCW	Normal close request answered by ACK.
@@ -255,8 +265,8 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = {
  *	sTW -> sTW	Retransmitted last ACK.
  *	sCL -> sCL
  */
-/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sLI	*/
-/*rst*/    { sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sIV },
+/* 	     sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2	*/
+/*rst*/    { sIV, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL, sCL },
 /*none*/   { sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sIV }
 	}
 };
@@ -296,13 +306,13 @@ static int tcp_print_tuple(struct seq_file *s,
 }
 
 /* Print out the private part of the conntrack. */
-static int tcp_print_conntrack(struct seq_file *s, const struct nf_conn *ct)
+static int tcp_print_conntrack(struct seq_file *s, struct nf_conn *ct)
 {
 	enum tcp_conntrack state;
 
-	read_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	state = ct->proto.tcp.state;
-	read_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	return seq_printf(s, "%s ", tcp_conntrack_names[state]);
 }
@@ -521,13 +531,14 @@ static bool tcp_in_window(const struct nf_conn *ct,
 		 receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
 		 receiver->td_scale);
 
-	if (sender->td_end == 0) {
+	if (sender->td_maxwin == 0) {
 		/*
 		 * Initialize sender data.
 		 */
-		if (tcph->syn && tcph->ack) {
+		if (tcph->syn) {
 			/*
-			 * Outgoing SYN-ACK in reply to a SYN.
+			 * SYN-ACK in reply to a SYN
+			 * or SYN from reply direction in simultaneous open.
 			 */
 			sender->td_end =
 			sender->td_maxend = end;
@@ -543,6 +554,9 @@ static bool tcp_in_window(const struct nf_conn *ct,
 			      && receiver->flags & IP_CT_TCP_FLAG_WINDOW_SCALE))
 				sender->td_scale =
 				receiver->td_scale = 0;
+			if (!tcph->ack)
+				/* Simultaneous open */
+				return true;
 		} else {
 			/*
 			 * We are in the middle of a connection,
@@ -716,14 +730,14 @@ void nf_conntrack_tcp_update(const struct sk_buff *skb,
 
 	end = segment_seq_plus_len(ntohl(tcph->seq), skb->len, dataoff, tcph);
 
-	write_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	/*
 	 * We have to worry for the ack in the reply packet only...
 	 */
 	if (after(end, ct->proto.tcp.seen[dir].td_end))
 		ct->proto.tcp.seen[dir].td_end = end;
 	ct->proto.tcp.last_end = end;
-	write_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 	pr_debug("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i "
 		 "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
 		 sender->td_end, sender->td_maxend, sender->td_maxwin,
@@ -832,7 +846,7 @@ static int tcp_packet(struct nf_conn *ct,
 	th = skb_header_pointer(skb, dataoff, sizeof(_tcph), &_tcph);
 	BUG_ON(th == NULL);
 
-	write_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	old_state = ct->proto.tcp.state;
 	dir = CTINFO2DIR(ctinfo);
 	index = get_conntrack_index(th);
@@ -862,7 +876,7 @@ static int tcp_packet(struct nf_conn *ct,
 		        && ct->proto.tcp.last_index == TCP_RST_SET)) {
 			/* Attempt to reopen a closed/aborted connection.
 			 * Delete this connection and look up again. */
-			write_unlock_bh(&tcp_lock);
+			spin_unlock_bh(&ct->lock);
 
 			/* Only repeat if we can actually remove the timer.
 			 * Destruction may already be in progress in process
@@ -898,7 +912,7 @@ static int tcp_packet(struct nf_conn *ct,
 			 * that the client cannot but retransmit its SYN and
 			 * thus initiate a clean new session.
 			 */
-			write_unlock_bh(&tcp_lock);
+			spin_unlock_bh(&ct->lock);
 			if (LOG_INVALID(net, IPPROTO_TCP))
 				nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 					  "nf_ct_tcp: killing out of sync session ");
@@ -911,7 +925,7 @@ static int tcp_packet(struct nf_conn *ct,
 		ct->proto.tcp.last_end =
 		    segment_seq_plus_len(ntohl(th->seq), skb->len, dataoff, th);
 
-		write_unlock_bh(&tcp_lock);
+		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_TCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 				  "nf_ct_tcp: invalid packet ignored ");
@@ -920,7 +934,7 @@ static int tcp_packet(struct nf_conn *ct,
 		/* Invalid packet */
 		pr_debug("nf_ct_tcp: Invalid dir=%i index=%u ostate=%u\n",
 			 dir, get_conntrack_index(th), old_state);
-		write_unlock_bh(&tcp_lock);
+		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_TCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 				  "nf_ct_tcp: invalid state ");
@@ -930,7 +944,7 @@ static int tcp_packet(struct nf_conn *ct,
 		    && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET)
 		    && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) {
 			/* Invalid RST  */
-			write_unlock_bh(&tcp_lock);
+			spin_unlock_bh(&ct->lock);
 			if (LOG_INVALID(net, IPPROTO_TCP))
 				nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
 					  "nf_ct_tcp: invalid RST ");
@@ -961,7 +975,7 @@ static int tcp_packet(struct nf_conn *ct,
 
 	if (!tcp_in_window(ct, &ct->proto.tcp, dir, index,
 			   skb, dataoff, th, pf)) {
-		write_unlock_bh(&tcp_lock);
+		spin_unlock_bh(&ct->lock);
 		return -NF_ACCEPT;
 	}
      in_window:
@@ -990,9 +1004,8 @@ static int tcp_packet(struct nf_conn *ct,
 		timeout = nf_ct_tcp_timeout_unacknowledged;
 	else
 		timeout = tcp_timeouts[new_state];
-	write_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 
-	nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, ct);
 	if (new_state != old_state)
 		nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
 
@@ -1086,7 +1099,7 @@ static bool tcp_new(struct nf_conn *ct, const struct sk_buff *skb,
 
 	ct->proto.tcp.seen[1].td_end = 0;
 	ct->proto.tcp.seen[1].td_maxend = 0;
-	ct->proto.tcp.seen[1].td_maxwin = 1;
+	ct->proto.tcp.seen[1].td_maxwin = 0;
 	ct->proto.tcp.seen[1].td_scale = 0;
 
 	/* tcp_packet will set them */
@@ -1108,12 +1121,12 @@ static bool tcp_new(struct nf_conn *ct, const struct sk_buff *skb,
 #include <linux/netfilter/nfnetlink_conntrack.h>
 
 static int tcp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
-			 const struct nf_conn *ct)
+			 struct nf_conn *ct)
 {
 	struct nlattr *nest_parms;
 	struct nf_ct_tcp_flags tmp = {};
 
-	read_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	nest_parms = nla_nest_start(skb, CTA_PROTOINFO_TCP | NLA_F_NESTED);
 	if (!nest_parms)
 		goto nla_put_failure;
@@ -1133,14 +1146,14 @@ static int tcp_to_nlattr(struct sk_buff *skb, struct nlattr *nla,
 	tmp.flags = ct->proto.tcp.seen[1].flags;
 	NLA_PUT(skb, CTA_PROTOINFO_TCP_FLAGS_REPLY,
 		sizeof(struct nf_ct_tcp_flags), &tmp);
-	read_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	nla_nest_end(skb, nest_parms);
 
 	return 0;
 
 nla_put_failure:
-	read_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 	return -1;
 }
 
@@ -1171,7 +1184,7 @@ static int nlattr_to_tcp(struct nlattr *cda[], struct nf_conn *ct)
 	    nla_get_u8(tb[CTA_PROTOINFO_TCP_STATE]) >= TCP_CONNTRACK_MAX)
 		return -EINVAL;
 
-	write_lock_bh(&tcp_lock);
+	spin_lock_bh(&ct->lock);
 	if (tb[CTA_PROTOINFO_TCP_STATE])
 		ct->proto.tcp.state = nla_get_u8(tb[CTA_PROTOINFO_TCP_STATE]);
 
@@ -1198,7 +1211,7 @@ static int nlattr_to_tcp(struct nlattr *cda[], struct nf_conn *ct)
 		ct->proto.tcp.seen[1].td_scale =
 			nla_get_u8(tb[CTA_PROTOINFO_TCP_WSCALE_REPLY]);
 	}
-	write_unlock_bh(&tcp_lock);
+	spin_unlock_bh(&ct->lock);
 
 	return 0;
 }
@@ -1328,6 +1341,13 @@ static struct ctl_table tcp_compat_sysctl_table[] = {
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
+		.procname	= "ip_conntrack_tcp_timeout_syn_sent2",
+		.data		= &tcp_timeouts[TCP_CONNTRACK_SYN_SENT2],
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_jiffies,
+	},
+	{
 		.procname	= "ip_conntrack_tcp_timeout_syn_recv",
 		.data		= &tcp_timeouts[TCP_CONNTRACK_SYN_RECV],
 		.maxlen		= sizeof(unsigned int),
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index beb37311e1a..2fefe147750 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -248,14 +248,14 @@ static int nf_log_proc_dostring(ctl_table *table, int write, struct file *filp,
 		rcu_assign_pointer(nf_loggers[tindex], logger);
 		mutex_unlock(&nf_log_mutex);
 	} else {
-		rcu_read_lock();
-		logger = rcu_dereference(nf_loggers[tindex]);
+		mutex_lock(&nf_log_mutex);
+		logger = nf_loggers[tindex];
 		if (!logger)
 			table->data = "NONE";
 		else
 			table->data = logger->name;
 		r = proc_dostring(table, write, filp, buffer, lenp, ppos);
-		rcu_read_unlock();
+		mutex_unlock(&nf_log_mutex);
 	}
 
 	return r;
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index 4f2310c93e0..3a6fd77f776 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -204,10 +204,10 @@ int nf_queue(struct sk_buff *skb,
 				  queuenum);
 
 	switch (pf) {
-	case AF_INET:
+	case NFPROTO_IPV4:
 		skb->protocol = htons(ETH_P_IP);
 		break;
-	case AF_INET6:
+	case NFPROTO_IPV6:
 		skb->protocol = htons(ETH_P_IPV6);
 		break;
 	}
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index b8ab37ad7ed..92761a98837 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -107,9 +107,10 @@ int nfnetlink_has_listeners(unsigned int group)
 }
 EXPORT_SYMBOL_GPL(nfnetlink_has_listeners);
 
-int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, int echo)
+int nfnetlink_send(struct sk_buff *skb, u32 pid,
+		   unsigned group, int echo, gfp_t flags)
 {
-	return nlmsg_notify(nfnl, skb, pid, group, echo, gfp_any());
+	return nlmsg_notify(nfnl, skb, pid, group, echo, flags);
 }
 EXPORT_SYMBOL_GPL(nfnetlink_send);
 
@@ -136,7 +137,7 @@ static int nfnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 		return -EPERM;
 
 	/* All the messages must at least contain nfgenmsg */
-	if (nlh->nlmsg_len < NLMSG_SPACE(sizeof(struct nfgenmsg)))
+	if (nlh->nlmsg_len < NLMSG_LENGTH(sizeof(struct nfgenmsg)))
 		return 0;
 
 	type = nlh->nlmsg_type;
@@ -160,19 +161,14 @@ replay:
 	{
 		int min_len = NLMSG_SPACE(sizeof(struct nfgenmsg));
 		u_int8_t cb_id = NFNL_MSG_TYPE(nlh->nlmsg_type);
-		u_int16_t attr_count = ss->cb[cb_id].attr_count;
-		struct nlattr *cda[attr_count+1];
-
-		if (likely(nlh->nlmsg_len >= min_len)) {
-			struct nlattr *attr = (void *)nlh + NLMSG_ALIGN(min_len);
-			int attrlen = nlh->nlmsg_len - NLMSG_ALIGN(min_len);
-
-			err = nla_parse(cda, attr_count, attr, attrlen,
-					ss->cb[cb_id].policy);
-			if (err < 0)
-				return err;
-		} else
-			return -EINVAL;
+		struct nlattr *cda[ss->cb[cb_id].attr_count + 1];
+		struct nlattr *attr = (void *)nlh + min_len;
+		int attrlen = nlh->nlmsg_len - min_len;
+
+		err = nla_parse(cda, ss->cb[cb_id].attr_count,
+				attr, attrlen, ss->cb[cb_id].policy);
+		if (err < 0)
+			return err;
 
 		err = nc->call(nfnl, skb, nlh, cda);
 		if (err == -EAGAIN)
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 8c860112ce0..71daa0934b6 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -1,6 +1,6 @@
 /*
  * This is a module which is used for queueing packets and communicating with
- * userspace via nfetlink.
+ * userspace via nfnetlink.
  *
  * (C) 2005 by Harald Welte <laforge@netfilter.org>
  * (C) 2007 by Patrick McHardy <kaber@trash.net>
@@ -932,6 +932,8 @@ static void __exit nfnetlink_queue_fini(void)
 #endif
 	nfnetlink_subsys_unregister(&nfqnl_subsys);
 	netlink_unregister_notifier(&nfqnl_rtnl_notifier);
+
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 MODULE_DESCRIPTION("netfilter packet queue handler");
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 150e5cf62f8..025d1a0af78 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -329,6 +329,32 @@ int xt_find_revision(u8 af, const char *name, u8 revision, int target,
 }
 EXPORT_SYMBOL_GPL(xt_find_revision);
 
+static char *textify_hooks(char *buf, size_t size, unsigned int mask)
+{
+	static const char *const names[] = {
+		"PREROUTING", "INPUT", "FORWARD",
+		"OUTPUT", "POSTROUTING", "BROUTING",
+	};
+	unsigned int i;
+	char *p = buf;
+	bool np = false;
+	int res;
+
+	*p = '\0';
+	for (i = 0; i < ARRAY_SIZE(names); ++i) {
+		if (!(mask & (1 << i)))
+			continue;
+		res = snprintf(p, size, "%s%s", np ? "/" : "", names[i]);
+		if (res > 0) {
+			size -= res;
+			p += res;
+		}
+		np = true;
+	}
+
+	return buf;
+}
+
 int xt_check_match(struct xt_mtchk_param *par,
 		   unsigned int size, u_int8_t proto, bool inv_proto)
 {
@@ -338,26 +364,30 @@ int xt_check_match(struct xt_mtchk_param *par,
 		 * ebt_among is exempt from centralized matchsize checking
 		 * because it uses a dynamic-size data set.
 		 */
-		printk("%s_tables: %s match: invalid size %Zu != %u\n",
+		pr_err("%s_tables: %s match: invalid size %Zu != %u\n",
 		       xt_prefix[par->family], par->match->name,
 		       XT_ALIGN(par->match->matchsize), size);
 		return -EINVAL;
 	}
 	if (par->match->table != NULL &&
 	    strcmp(par->match->table, par->table) != 0) {
-		printk("%s_tables: %s match: only valid in %s table, not %s\n",
+		pr_err("%s_tables: %s match: only valid in %s table, not %s\n",
 		       xt_prefix[par->family], par->match->name,
 		       par->match->table, par->table);
 		return -EINVAL;
 	}
 	if (par->match->hooks && (par->hook_mask & ~par->match->hooks) != 0) {
-		printk("%s_tables: %s match: bad hook_mask %#x/%#x\n",
+		char used[64], allow[64];
+
+		pr_err("%s_tables: %s match: used from hooks %s, but only "
+		       "valid from %s\n",
 		       xt_prefix[par->family], par->match->name,
-		       par->hook_mask, par->match->hooks);
+		       textify_hooks(used, sizeof(used), par->hook_mask),
+		       textify_hooks(allow, sizeof(allow), par->match->hooks));
 		return -EINVAL;
 	}
 	if (par->match->proto && (par->match->proto != proto || inv_proto)) {
-		printk("%s_tables: %s match: only valid for protocol %u\n",
+		pr_err("%s_tables: %s match: only valid for protocol %u\n",
 		       xt_prefix[par->family], par->match->name,
 		       par->match->proto);
 		return -EINVAL;
@@ -484,26 +514,30 @@ int xt_check_target(struct xt_tgchk_param *par,
 		    unsigned int size, u_int8_t proto, bool inv_proto)
 {
 	if (XT_ALIGN(par->target->targetsize) != size) {
-		printk("%s_tables: %s target: invalid size %Zu != %u\n",
+		pr_err("%s_tables: %s target: invalid size %Zu != %u\n",
 		       xt_prefix[par->family], par->target->name,
 		       XT_ALIGN(par->target->targetsize), size);
 		return -EINVAL;
 	}
 	if (par->target->table != NULL &&
 	    strcmp(par->target->table, par->table) != 0) {
-		printk("%s_tables: %s target: only valid in %s table, not %s\n",
+		pr_err("%s_tables: %s target: only valid in %s table, not %s\n",
 		       xt_prefix[par->family], par->target->name,
 		       par->target->table, par->table);
 		return -EINVAL;
 	}
 	if (par->target->hooks && (par->hook_mask & ~par->target->hooks) != 0) {
-		printk("%s_tables: %s target: bad hook_mask %#x/%#x\n",
+		char used[64], allow[64];
+
+		pr_err("%s_tables: %s target: used from hooks %s, but only "
+		       "usable from %s\n",
 		       xt_prefix[par->family], par->target->name,
-		       par->hook_mask, par->target->hooks);
+		       textify_hooks(used, sizeof(used), par->hook_mask),
+		       textify_hooks(allow, sizeof(allow), par->target->hooks));
 		return -EINVAL;
 	}
 	if (par->target->proto && (par->target->proto != proto || inv_proto)) {
-		printk("%s_tables: %s target: only valid for protocol %u\n",
+		pr_err("%s_tables: %s target: only valid for protocol %u\n",
 		       xt_prefix[par->family], par->target->name,
 		       par->target->proto);
 		return -EINVAL;
diff --git a/net/netfilter/xt_NFQUEUE.c b/net/netfilter/xt_NFQUEUE.c
index f9977b3311f..498b45101df 100644
--- a/net/netfilter/xt_NFQUEUE.c
+++ b/net/netfilter/xt_NFQUEUE.c
@@ -11,6 +11,10 @@
 #include <linux/module.h>
 #include <linux/skbuff.h>
 
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/jhash.h>
+
 #include <linux/netfilter.h>
 #include <linux/netfilter_arp.h>
 #include <linux/netfilter/x_tables.h>
@@ -23,6 +27,8 @@ MODULE_ALIAS("ipt_NFQUEUE");
 MODULE_ALIAS("ip6t_NFQUEUE");
 MODULE_ALIAS("arpt_NFQUEUE");
 
+static u32 jhash_initval __read_mostly;
+
 static unsigned int
 nfqueue_tg(struct sk_buff *skb, const struct xt_target_param *par)
 {
@@ -31,32 +37,105 @@ nfqueue_tg(struct sk_buff *skb, const struct xt_target_param *par)
 	return NF_QUEUE_NR(tinfo->queuenum);
 }
 
+static u32 hash_v4(const struct sk_buff *skb)
+{
+	const struct iphdr *iph = ip_hdr(skb);
+	u32 ipaddr;
+
+	/* packets in either direction go into same queue */
+	ipaddr = iph->saddr ^ iph->daddr;
+
+	return jhash_2words(ipaddr, iph->protocol, jhash_initval);
+}
+
+static unsigned int
+nfqueue_tg4_v1(struct sk_buff *skb, const struct xt_target_param *par)
+{
+	const struct xt_NFQ_info_v1 *info = par->targinfo;
+	u32 queue = info->queuenum;
+
+	if (info->queues_total > 1)
+		queue = hash_v4(skb) % info->queues_total + queue;
+	return NF_QUEUE_NR(queue);
+}
+
+#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
+static u32 hash_v6(const struct sk_buff *skb)
+{
+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
+	u32 addr[4];
+
+	addr[0] = ip6h->saddr.s6_addr32[0] ^ ip6h->daddr.s6_addr32[0];
+	addr[1] = ip6h->saddr.s6_addr32[1] ^ ip6h->daddr.s6_addr32[1];
+	addr[2] = ip6h->saddr.s6_addr32[2] ^ ip6h->daddr.s6_addr32[2];
+	addr[3] = ip6h->saddr.s6_addr32[3] ^ ip6h->daddr.s6_addr32[3];
+
+	return jhash2(addr, ARRAY_SIZE(addr), jhash_initval);
+}
+
+static unsigned int
+nfqueue_tg6_v1(struct sk_buff *skb, const struct xt_target_param *par)
+{
+	const struct xt_NFQ_info_v1 *info = par->targinfo;
+	u32 queue = info->queuenum;
+
+	if (info->queues_total > 1)
+		queue = hash_v6(skb) % info->queues_total + queue;
+	return NF_QUEUE_NR(queue);
+}
+#endif
+
+static bool nfqueue_tg_v1_check(const struct xt_tgchk_param *par)
+{
+	const struct xt_NFQ_info_v1 *info = par->targinfo;
+	u32 maxid;
+
+	if (info->queues_total == 0) {
+		pr_err("NFQUEUE: number of total queues is 0\n");
+		return false;
+	}
+	maxid = info->queues_total - 1 + info->queuenum;
+	if (maxid > 0xffff) {
+		pr_err("NFQUEUE: number of queues (%u) out of range (got %u)\n",
+		       info->queues_total, maxid);
+		return false;
+	}
+	return true;
+}
+
 static struct xt_target nfqueue_tg_reg[] __read_mostly = {
 	{
 		.name		= "NFQUEUE",
-		.family		= NFPROTO_IPV4,
+		.family		= NFPROTO_UNSPEC,
 		.target		= nfqueue_tg,
 		.targetsize	= sizeof(struct xt_NFQ_info),
 		.me		= THIS_MODULE,
 	},
 	{
 		.name		= "NFQUEUE",
-		.family		= NFPROTO_IPV6,
-		.target		= nfqueue_tg,
-		.targetsize	= sizeof(struct xt_NFQ_info),
+		.revision	= 1,
+		.family		= NFPROTO_IPV4,
+		.checkentry	= nfqueue_tg_v1_check,
+		.target		= nfqueue_tg4_v1,
+		.targetsize	= sizeof(struct xt_NFQ_info_v1),
 		.me		= THIS_MODULE,
 	},
+#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
 	{
 		.name		= "NFQUEUE",
-		.family		= NFPROTO_ARP,
-		.target		= nfqueue_tg,
-		.targetsize	= sizeof(struct xt_NFQ_info),
+		.revision	= 1,
+		.family		= NFPROTO_IPV6,
+		.checkentry	= nfqueue_tg_v1_check,
+		.target		= nfqueue_tg6_v1,
+		.targetsize	= sizeof(struct xt_NFQ_info_v1),
 		.me		= THIS_MODULE,
 	},
+#endif
 };
 
 static int __init nfqueue_tg_init(void)
 {
+	get_random_bytes(&jhash_initval, sizeof(jhash_initval));
 	return xt_register_targets(nfqueue_tg_reg, ARRAY_SIZE(nfqueue_tg_reg));
 }
 
diff --git a/net/netfilter/xt_TCPMSS.c b/net/netfilter/xt_TCPMSS.c
index 4f3b1f80879..eda64c1cb1e 100644
--- a/net/netfilter/xt_TCPMSS.c
+++ b/net/netfilter/xt_TCPMSS.c
@@ -73,11 +73,11 @@ tcpmss_mangle_packet(struct sk_buff *skb,
 	}
 
 	if (info->mss == XT_TCPMSS_CLAMP_PMTU) {
-		if (dst_mtu(skb->dst) <= minlen) {
+		if (dst_mtu(skb_dst(skb)) <= minlen) {
 			if (net_ratelimit())
 				printk(KERN_ERR "xt_TCPMSS: "
 				       "unknown or invalid path-MTU (%u)\n",
-				       dst_mtu(skb->dst));
+				       dst_mtu(skb_dst(skb)));
 			return -1;
 		}
 		if (in_mtu <= minlen) {
@@ -86,7 +86,7 @@ tcpmss_mangle_packet(struct sk_buff *skb,
 				       "invalid path-MTU (%u)\n", in_mtu);
 			return -1;
 		}
-		newmss = min(dst_mtu(skb->dst), in_mtu) - minlen;
+		newmss = min(dst_mtu(skb_dst(skb)), in_mtu) - minlen;
 	} else
 		newmss = info->mss;
 
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
new file mode 100644
index 00000000000..863e40977a4
--- /dev/null
+++ b/net/netfilter/xt_osf.c
@@ -0,0 +1,428 @@
+/*
+ * Copyright (c) 2003+ Evgeniy Polyakov <zbr@ioremap.net>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <linux/if.h>
+#include <linux/inetdevice.h>
+#include <linux/ip.h>
+#include <linux/list.h>
+#include <linux/rculist.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+
+#include <net/ip.h>
+#include <net/tcp.h>
+
+#include <linux/netfilter/nfnetlink.h>
+#include <linux/netfilter/x_tables.h>
+#include <net/netfilter/nf_log.h>
+#include <linux/netfilter/xt_osf.h>
+
+struct xt_osf_finger {
+	struct rcu_head			rcu_head;
+	struct list_head		finger_entry;
+	struct xt_osf_user_finger	finger;
+};
+
+enum osf_fmatch_states {
+	/* Packet does not match the fingerprint */
+	FMATCH_WRONG = 0,
+	/* Packet matches the fingerprint */
+	FMATCH_OK,
+	/* Options do not match the fingerprint, but header does */
+	FMATCH_OPT_WRONG,
+};
+
+/*
+ * Indexed by dont-fragment bit.
+ * It is the only constant value in the fingerprint.
+ */
+static struct list_head xt_osf_fingers[2];
+
+static const struct nla_policy xt_osf_policy[OSF_ATTR_MAX + 1] = {
+	[OSF_ATTR_FINGER]	= { .len = sizeof(struct xt_osf_user_finger) },
+};
+
+static void xt_osf_finger_free_rcu(struct rcu_head *rcu_head)
+{
+	struct xt_osf_finger *f = container_of(rcu_head, struct xt_osf_finger, rcu_head);
+
+	kfree(f);
+}
+
+static int xt_osf_add_callback(struct sock *ctnl, struct sk_buff *skb,
+			struct nlmsghdr *nlh, struct nlattr *osf_attrs[])
+{
+	struct xt_osf_user_finger *f;
+	struct xt_osf_finger *kf = NULL, *sf;
+	int err = 0;
+
+	if (!osf_attrs[OSF_ATTR_FINGER])
+		return -EINVAL;
+
+	if (!(nlh->nlmsg_flags & NLM_F_CREATE))
+		return -EINVAL;
+
+	f = nla_data(osf_attrs[OSF_ATTR_FINGER]);
+
+	kf = kmalloc(sizeof(struct xt_osf_finger), GFP_KERNEL);
+	if (!kf)
+		return -ENOMEM;
+
+	memcpy(&kf->finger, f, sizeof(struct xt_osf_user_finger));
+
+	list_for_each_entry(sf, &xt_osf_fingers[!!f->df], finger_entry) {
+		if (memcmp(&sf->finger, f, sizeof(struct xt_osf_user_finger)))
+			continue;
+
+		kfree(kf);
+		kf = NULL;
+
+		if (nlh->nlmsg_flags & NLM_F_EXCL)
+			err = -EEXIST;
+		break;
+	}
+
+	/*
+	 * We are protected by nfnl mutex.
+	 */
+	if (kf)
+		list_add_tail_rcu(&kf->finger_entry, &xt_osf_fingers[!!f->df]);
+
+	return err;
+}
+
+static int xt_osf_remove_callback(struct sock *ctnl, struct sk_buff *skb,
+			struct nlmsghdr *nlh, struct nlattr *osf_attrs[])
+{
+	struct xt_osf_user_finger *f;
+	struct xt_osf_finger *sf;
+	int err = ENOENT;
+
+	if (!osf_attrs[OSF_ATTR_FINGER])
+		return -EINVAL;
+
+	f = nla_data(osf_attrs[OSF_ATTR_FINGER]);
+
+	list_for_each_entry(sf, &xt_osf_fingers[!!f->df], finger_entry) {
+		if (memcmp(&sf->finger, f, sizeof(struct xt_osf_user_finger)))
+			continue;
+
+		/*
+		 * We are protected by nfnl mutex.
+		 */
+		list_del_rcu(&sf->finger_entry);
+		call_rcu(&sf->rcu_head, xt_osf_finger_free_rcu);
+
+		err = 0;
+		break;
+	}
+
+	return err;
+}
+
+static const struct nfnl_callback xt_osf_nfnetlink_callbacks[OSF_MSG_MAX] = {
+	[OSF_MSG_ADD]	= {
+		.call		= xt_osf_add_callback,
+		.attr_count	= OSF_ATTR_MAX,
+		.policy		= xt_osf_policy,
+	},
+	[OSF_MSG_REMOVE]	= {
+		.call		= xt_osf_remove_callback,
+		.attr_count	= OSF_ATTR_MAX,
+		.policy		= xt_osf_policy,
+	},
+};
+
+static const struct nfnetlink_subsystem xt_osf_nfnetlink = {
+	.name			= "osf",
+	.subsys_id		= NFNL_SUBSYS_OSF,
+	.cb_count		= OSF_MSG_MAX,
+	.cb			= xt_osf_nfnetlink_callbacks,
+};
+
+static inline int xt_osf_ttl(const struct sk_buff *skb, const struct xt_osf_info *info,
+			    unsigned char f_ttl)
+{
+	const struct iphdr *ip = ip_hdr(skb);
+
+	if (info->flags & XT_OSF_TTL) {
+		if (info->ttl == XT_OSF_TTL_TRUE)
+			return ip->ttl == f_ttl;
+		if (info->ttl == XT_OSF_TTL_NOCHECK)
+			return 1;
+		else if (ip->ttl <= f_ttl)
+			return 1;
+		else {
+			struct in_device *in_dev = __in_dev_get_rcu(skb->dev);
+			int ret = 0;
+
+			for_ifa(in_dev) {
+				if (inet_ifa_match(ip->saddr, ifa)) {
+					ret = (ip->ttl == f_ttl);
+					break;
+				}
+			}
+			endfor_ifa(in_dev);
+
+			return ret;
+		}
+	}
+
+	return ip->ttl == f_ttl;
+}
+
+static bool xt_osf_match_packet(const struct sk_buff *skb,
+		const struct xt_match_param *p)
+{
+	const struct xt_osf_info *info = p->matchinfo;
+	const struct iphdr *ip = ip_hdr(skb);
+	const struct tcphdr *tcp;
+	struct tcphdr _tcph;
+	int fmatch = FMATCH_WRONG, fcount = 0;
+	unsigned int optsize = 0, check_WSS = 0;
+	u16 window, totlen, mss = 0;
+	bool df;
+	const unsigned char *optp = NULL, *_optp = NULL;
+	unsigned char opts[MAX_IPOPTLEN];
+	const struct xt_osf_finger *kf;
+	const struct xt_osf_user_finger *f;
+
+	if (!info)
+		return false;
+
+	tcp = skb_header_pointer(skb, ip_hdrlen(skb), sizeof(struct tcphdr), &_tcph);
+	if (!tcp)
+		return false;
+
+	if (!tcp->syn)
+		return false;
+
+	totlen = ntohs(ip->tot_len);
+	df = ntohs(ip->frag_off) & IP_DF;
+	window = ntohs(tcp->window);
+
+	if (tcp->doff * 4 > sizeof(struct tcphdr)) {
+		optsize = tcp->doff * 4 - sizeof(struct tcphdr);
+
+		_optp = optp = skb_header_pointer(skb, ip_hdrlen(skb) +
+				sizeof(struct tcphdr), optsize, opts);
+	}
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(kf, &xt_osf_fingers[df], finger_entry) {
+		f = &kf->finger;
+
+		if (!(info->flags & XT_OSF_LOG) && strcmp(info->genre, f->genre))
+			continue;
+
+		optp = _optp;
+		fmatch = FMATCH_WRONG;
+
+		if (totlen == f->ss && xt_osf_ttl(skb, info, f->ttl)) {
+			int foptsize, optnum;
+
+			/*
+			 * Should not happen if userspace parser was written correctly.
+			 */
+			if (f->wss.wc >= OSF_WSS_MAX)
+				continue;
+
+			/* Check options */
+
+			foptsize = 0;
+			for (optnum = 0; optnum < f->opt_num; ++optnum)
+				foptsize += f->opt[optnum].length;
+
+			if (foptsize > MAX_IPOPTLEN ||
+				optsize > MAX_IPOPTLEN ||
+				optsize != foptsize)
+				continue;
+
+			check_WSS = f->wss.wc;
+
+			for (optnum = 0; optnum < f->opt_num; ++optnum) {
+				if (f->opt[optnum].kind == (*optp)) {
+					__u32 len = f->opt[optnum].length;
+					const __u8 *optend = optp + len;
+					int loop_cont = 0;
+
+					fmatch = FMATCH_OK;
+
+					switch (*optp) {
+					case OSFOPT_MSS:
+						mss = optp[3];
+						mss <<= 8;
+						mss |= optp[2];
+
+						mss = ntohs(mss);
+						break;
+					case OSFOPT_TS:
+						loop_cont = 1;
+						break;
+					}
+
+					optp = optend;
+				} else
+					fmatch = FMATCH_OPT_WRONG;
+
+				if (fmatch != FMATCH_OK)
+					break;
+			}
+
+			if (fmatch != FMATCH_OPT_WRONG) {
+				fmatch = FMATCH_WRONG;
+
+				switch (check_WSS) {
+				case OSF_WSS_PLAIN:
+					if (f->wss.val == 0 || window == f->wss.val)
+						fmatch = FMATCH_OK;
+					break;
+				case OSF_WSS_MSS:
+					/*
+					 * Some smart modems decrease mangle MSS to 
+					 * SMART_MSS_2, so we check standard, decreased
+					 * and the one provided in the fingerprint MSS
+					 * values.
+					 */
+#define SMART_MSS_1	1460
+#define SMART_MSS_2	1448
+					if (window == f->wss.val * mss ||
+					    window == f->wss.val * SMART_MSS_1 ||
+					    window == f->wss.val * SMART_MSS_2)
+						fmatch = FMATCH_OK;
+					break;
+				case OSF_WSS_MTU:
+					if (window == f->wss.val * (mss + 40) ||
+					    window == f->wss.val * (SMART_MSS_1 + 40) ||
+					    window == f->wss.val * (SMART_MSS_2 + 40))
+						fmatch = FMATCH_OK;
+					break;
+				case OSF_WSS_MODULO:
+					if ((window % f->wss.val) == 0)
+						fmatch = FMATCH_OK;
+					break;
+				}
+			}
+
+			if (fmatch != FMATCH_OK)
+				continue;
+
+			fcount++;
+
+			if (info->flags & XT_OSF_LOG)
+				nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+					"%s [%s:%s] : %pi4:%d -> %pi4:%d hops=%d\n",
+					f->genre, f->version, f->subtype,
+					&ip->saddr, ntohs(tcp->source),
+					&ip->daddr, ntohs(tcp->dest),
+					f->ttl - ip->ttl);
+
+			if ((info->flags & XT_OSF_LOG) &&
+			    info->loglevel == XT_OSF_LOGLEVEL_FIRST)
+				break;
+		}
+	}
+	rcu_read_unlock();
+
+	if (!fcount && (info->flags & XT_OSF_LOG))
+		nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+			"Remote OS is not known: %pi4:%u -> %pi4:%u\n",
+				&ip->saddr, ntohs(tcp->source),
+				&ip->daddr, ntohs(tcp->dest));
+
+	if (fcount)
+		fmatch = FMATCH_OK;
+
+	return fmatch == FMATCH_OK;
+}
+
+static struct xt_match xt_osf_match = {
+	.name 		= "osf",
+	.revision	= 0,
+	.family		= NFPROTO_IPV4,
+	.proto		= IPPROTO_TCP,
+	.hooks      	= (1 << NF_INET_LOCAL_IN) |
+				(1 << NF_INET_PRE_ROUTING) |
+				(1 << NF_INET_FORWARD),
+	.match 		= xt_osf_match_packet,
+	.matchsize	= sizeof(struct xt_osf_info),
+	.me		= THIS_MODULE,
+};
+
+static int __init xt_osf_init(void)
+{
+	int err = -EINVAL;
+	int i;
+
+	for (i=0; i<ARRAY_SIZE(xt_osf_fingers); ++i)
+		INIT_LIST_HEAD(&xt_osf_fingers[i]);
+
+	err = nfnetlink_subsys_register(&xt_osf_nfnetlink);
+	if (err < 0) {
+		printk(KERN_ERR "Failed (%d) to register OSF nsfnetlink helper.\n", err);
+		goto err_out_exit;
+	}
+
+	err = xt_register_match(&xt_osf_match);
+	if (err) {
+		printk(KERN_ERR "Failed (%d) to register OS fingerprint "
+				"matching module.\n", err);
+		goto err_out_remove;
+	}
+
+	return 0;
+
+err_out_remove:
+	nfnetlink_subsys_unregister(&xt_osf_nfnetlink);
+err_out_exit:
+	return err;
+}
+
+static void __exit xt_osf_fini(void)
+{
+	struct xt_osf_finger *f;
+	int i;
+
+	nfnetlink_subsys_unregister(&xt_osf_nfnetlink);
+	xt_unregister_match(&xt_osf_match);
+
+	rcu_read_lock();
+	for (i=0; i<ARRAY_SIZE(xt_osf_fingers); ++i) {
+
+		list_for_each_entry_rcu(f, &xt_osf_fingers[i], finger_entry) {
+			list_del_rcu(&f->finger_entry);
+			call_rcu(&f->rcu_head, xt_osf_finger_free_rcu);
+		}
+	}
+	rcu_read_unlock();
+
+	rcu_barrier();
+}
+
+module_init(xt_osf_init);
+module_exit(xt_osf_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
+MODULE_DESCRIPTION("Passive OS fingerprint matching.");
+MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_OSF);
diff --git a/net/netfilter/xt_policy.c b/net/netfilter/xt_policy.c
index 328bd20ddd2..4cbfebda8fa 100644
--- a/net/netfilter/xt_policy.c
+++ b/net/netfilter/xt_policy.c
@@ -86,7 +86,7 @@ match_policy_out(const struct sk_buff *skb, const struct xt_policy_info *info,
 		 unsigned short family)
 {
 	const struct xt_policy_elem *e;
-	const struct dst_entry *dst = skb->dst;
+	const struct dst_entry *dst = skb_dst(skb);
 	int strict = info->flags & XT_POLICY_MATCH_STRICT;
 	int i, pos;
 
diff --git a/net/netfilter/xt_realm.c b/net/netfilter/xt_realm.c
index 67419287bc7..484d1689bfd 100644
--- a/net/netfilter/xt_realm.c
+++ b/net/netfilter/xt_realm.c
@@ -25,7 +25,7 @@ static bool
 realm_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 {
 	const struct xt_realm_info *info = par->matchinfo;
-	const struct dst_entry *dst = skb->dst;
+	const struct dst_entry *dst = skb_dst(skb);
 
 	return (info->id == (dst->tclassid & info->mask)) ^ info->invert;
 }
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index 1acc089be7e..ebf00ad5b19 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -22,6 +22,8 @@
 #include <net/netfilter/nf_tproxy_core.h>
 #include <net/netfilter/ipv4/nf_defrag_ipv4.h>
 
+#include <linux/netfilter/xt_socket.h>
+
 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
 #define XT_SOCKET_HAVE_CONNTRACK 1
 #include <net/netfilter/nf_conntrack.h>
@@ -86,7 +88,8 @@ extract_icmp_fields(const struct sk_buff *skb,
 
 
 static bool
-socket_mt(const struct sk_buff *skb, const struct xt_match_param *par)
+socket_match(const struct sk_buff *skb, const struct xt_match_param *par,
+	     const struct xt_socket_mtinfo1 *info)
 {
 	const struct iphdr *iph = ip_hdr(skb);
 	struct udphdr _hdr, *hp = NULL;
@@ -141,10 +144,24 @@ socket_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 	sk = nf_tproxy_get_sock_v4(dev_net(skb->dev), protocol,
 				   saddr, daddr, sport, dport, par->in, false);
 	if (sk != NULL) {
-		bool wildcard = (sk->sk_state != TCP_TIME_WAIT && inet_sk(sk)->rcv_saddr == 0);
+		bool wildcard;
+		bool transparent = true;
+
+		/* Ignore sockets listening on INADDR_ANY */
+		wildcard = (sk->sk_state != TCP_TIME_WAIT &&
+			    inet_sk(sk)->rcv_saddr == 0);
+
+		/* Ignore non-transparent sockets,
+		   if XT_SOCKET_TRANSPARENT is used */
+		if (info && info->flags & XT_SOCKET_TRANSPARENT)
+			transparent = ((sk->sk_state != TCP_TIME_WAIT &&
+					inet_sk(sk)->transparent) ||
+				       (sk->sk_state == TCP_TIME_WAIT &&
+					inet_twsk(sk)->tw_transparent));
 
 		nf_tproxy_put_sock(sk);
-		if (wildcard)
+
+		if (wildcard || !transparent)
 			sk = NULL;
 	}
 
@@ -157,23 +174,47 @@ socket_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 	return (sk != NULL);
 }
 
-static struct xt_match socket_mt_reg __read_mostly = {
-	.name		= "socket",
-	.family		= AF_INET,
-	.match		= socket_mt,
-	.hooks		= 1 << NF_INET_PRE_ROUTING,
-	.me		= THIS_MODULE,
+static bool
+socket_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+	return socket_match(skb, par, NULL);
+}
+
+static bool
+socket_mt_v1(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+	return socket_match(skb, par, par->matchinfo);
+}
+
+static struct xt_match socket_mt_reg[] __read_mostly = {
+	{
+		.name		= "socket",
+		.revision	= 0,
+		.family		= NFPROTO_IPV4,
+		.match		= socket_mt_v0,
+		.hooks		= 1 << NF_INET_PRE_ROUTING,
+		.me		= THIS_MODULE,
+	},
+	{
+		.name		= "socket",
+		.revision	= 1,
+		.family		= NFPROTO_IPV4,
+		.match		= socket_mt_v1,
+		.matchsize	= sizeof(struct xt_socket_mtinfo1),
+		.hooks		= 1 << NF_INET_PRE_ROUTING,
+		.me		= THIS_MODULE,
+	},
 };
 
 static int __init socket_mt_init(void)
 {
 	nf_defrag_ipv4_enable();
-	return xt_register_match(&socket_mt_reg);
+	return xt_register_matches(socket_mt_reg, ARRAY_SIZE(socket_mt_reg));
 }
 
 static void __exit socket_mt_exit(void)
 {
-	xt_unregister_match(&socket_mt_reg);
+	xt_unregister_matches(socket_mt_reg, ARRAY_SIZE(socket_mt_reg));
 }
 
 module_init(socket_mt_init);
diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index bf1ab1a6790..e639298bc9c 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -785,18 +785,6 @@ static struct genl_ops netlbl_cipsov4_ops[] = {
  */
 int __init netlbl_cipsov4_genl_init(void)
 {
-	int ret_val, i;
-
-	ret_val = genl_register_family(&netlbl_cipsov4_gnl_family);
-	if (ret_val != 0)
-		return ret_val;
-
-	for (i = 0; i < ARRAY_SIZE(netlbl_cipsov4_ops); i++) {
-		ret_val = genl_register_ops(&netlbl_cipsov4_gnl_family,
-				&netlbl_cipsov4_ops[i]);
-		if (ret_val != 0)
-			return ret_val;
-	}
-
-	return 0;
+	return genl_register_family_with_ops(&netlbl_cipsov4_gnl_family,
+		netlbl_cipsov4_ops, ARRAY_SIZE(netlbl_cipsov4_ops));
 }
diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c
index 1821c5d50fb..8203623e65a 100644
--- a/net/netlabel/netlabel_mgmt.c
+++ b/net/netlabel/netlabel_mgmt.c
@@ -779,18 +779,6 @@ static struct genl_ops netlbl_mgmt_genl_ops[] = {
  */
 int __init netlbl_mgmt_genl_init(void)
 {
-	int ret_val, i;
-
-	ret_val = genl_register_family(&netlbl_mgmt_gnl_family);
-	if (ret_val != 0)
-		return ret_val;
-
-	for (i = 0; i < ARRAY_SIZE(netlbl_mgmt_genl_ops); i++) {
-		ret_val = genl_register_ops(&netlbl_mgmt_gnl_family,
-				&netlbl_mgmt_genl_ops[i]);
-		if (ret_val != 0)
-			return ret_val;
-	}
-
-	return 0;
+	return genl_register_family_with_ops(&netlbl_mgmt_gnl_family,
+		netlbl_mgmt_genl_ops, ARRAY_SIZE(netlbl_mgmt_genl_ops));
 }
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index f3c5c68c684..fb357f01018 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -1478,20 +1478,8 @@ static struct genl_ops netlbl_unlabel_genl_ops[] = {
  */
 int __init netlbl_unlabel_genl_init(void)
 {
-	int ret_val, i;
-
-	ret_val = genl_register_family(&netlbl_unlabel_gnl_family);
-	if (ret_val != 0)
-		return ret_val;
-
-	for (i = 0; i < ARRAY_SIZE(netlbl_unlabel_genl_ops); i++) {
-		ret_val = genl_register_ops(&netlbl_unlabel_gnl_family,
-				&netlbl_unlabel_genl_ops[i]);
-		if (ret_val != 0)
-			return ret_val;
-	}
-
-	return 0;
+	return genl_register_family_with_ops(&netlbl_unlabel_gnl_family,
+		netlbl_unlabel_genl_ops, ARRAY_SIZE(netlbl_unlabel_genl_ops));
 }
 
 /*
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index 1d3dd30099d..eed4c6a8afc 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -384,6 +384,52 @@ errout:
 }
 
 /**
+ * genl_register_family_with_ops - register a generic netlink family
+ * @family: generic netlink family
+ * @ops: operations to be registered
+ * @n_ops: number of elements to register
+ *
+ * Registers the specified family and operations from the specified table.
+ * Only one family may be registered with the same family name or identifier.
+ *
+ * The family id may equal GENL_ID_GENERATE causing an unique id to
+ * be automatically generated and assigned.
+ *
+ * Either a doit or dumpit callback must be specified for every registered
+ * operation or the function will fail. Only one operation structure per
+ * command identifier may be registered.
+ *
+ * See include/net/genetlink.h for more documenation on the operations
+ * structure.
+ *
+ * This is equivalent to calling genl_register_family() followed by
+ * genl_register_ops() for every operation entry in the table taking
+ * care to unregister the family on error path.
+ *
+ * Return 0 on success or a negative error code.
+ */
+int genl_register_family_with_ops(struct genl_family *family,
+	struct genl_ops *ops, size_t n_ops)
+{
+	int err, i;
+
+	err = genl_register_family(family);
+	if (err)
+		return err;
+
+	for (i = 0; i < n_ops; ++i, ++ops) {
+		err = genl_register_ops(family, ops);
+		if (err)
+			goto err_out;
+	}
+	return 0;
+err_out:
+	genl_unregister_family(family);
+	return err;
+}
+EXPORT_SYMBOL(genl_register_family_with_ops);
+
+/**
  * genl_unregister_family - unregister generic netlink family
  * @family: generic netlink family
  *
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index f546e81acc4..4f76e5552d8 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -39,6 +39,7 @@
  *					will simply extend the hardware address
  *					byte arrays at the end of sockaddr_ll
  *					and packet_mreq.
+ *		Johann Baudy	:	Added TX RING.
  *
  *		This program is free software; you can redistribute it and/or
  *		modify it under the terms of the GNU General Public License
@@ -157,7 +158,25 @@ struct packet_mreq_max
 };
 
 #ifdef CONFIG_PACKET_MMAP
-static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing);
+static int packet_set_ring(struct sock *sk, struct tpacket_req *req,
+		int closing, int tx_ring);
+
+struct packet_ring_buffer {
+	char *			*pg_vec;
+	unsigned int		head;
+	unsigned int		frames_per_block;
+	unsigned int		frame_size;
+	unsigned int		frame_max;
+
+	unsigned int		pg_vec_order;
+	unsigned int		pg_vec_pages;
+	unsigned int		pg_vec_len;
+
+	atomic_t		pending;
+};
+
+struct packet_sock;
+static int tpacket_snd(struct packet_sock *po, struct msghdr *msg);
 #endif
 
 static void packet_flush_mclist(struct sock *sk);
@@ -167,11 +186,8 @@ struct packet_sock {
 	struct sock		sk;
 	struct tpacket_stats	stats;
 #ifdef CONFIG_PACKET_MMAP
-	char *			*pg_vec;
-	unsigned int		head;
-	unsigned int            frames_per_block;
-	unsigned int		frame_size;
-	unsigned int		frame_max;
+	struct packet_ring_buffer	rx_ring;
+	struct packet_ring_buffer	tx_ring;
 	int			copy_thresh;
 #endif
 	struct packet_type	prot_hook;
@@ -185,12 +201,10 @@ struct packet_sock {
 	struct packet_mclist	*mclist;
 #ifdef CONFIG_PACKET_MMAP
 	atomic_t		mapped;
-	unsigned int            pg_vec_order;
-	unsigned int		pg_vec_pages;
-	unsigned int		pg_vec_len;
 	enum tpacket_versions	tp_version;
 	unsigned int		tp_hdrlen;
 	unsigned int		tp_reserve;
+	unsigned int		tp_loss:1;
 #endif
 };
 
@@ -206,36 +220,33 @@ struct packet_skb_cb {
 
 #ifdef CONFIG_PACKET_MMAP
 
-static void *packet_lookup_frame(struct packet_sock *po, unsigned int position,
-				 int status)
+static void __packet_set_status(struct packet_sock *po, void *frame, int status)
 {
-	unsigned int pg_vec_pos, frame_offset;
 	union {
 		struct tpacket_hdr *h1;
 		struct tpacket2_hdr *h2;
 		void *raw;
 	} h;
 
-	pg_vec_pos = position / po->frames_per_block;
-	frame_offset = position % po->frames_per_block;
-
-	h.raw = po->pg_vec[pg_vec_pos] + (frame_offset * po->frame_size);
+	h.raw = frame;
 	switch (po->tp_version) {
 	case TPACKET_V1:
-		if (status != (h.h1->tp_status ? TP_STATUS_USER :
-						TP_STATUS_KERNEL))
-			return NULL;
+		h.h1->tp_status = status;
+		flush_dcache_page(virt_to_page(&h.h1->tp_status));
 		break;
 	case TPACKET_V2:
-		if (status != (h.h2->tp_status ? TP_STATUS_USER :
-						TP_STATUS_KERNEL))
-			return NULL;
+		h.h2->tp_status = status;
+		flush_dcache_page(virt_to_page(&h.h2->tp_status));
 		break;
+	default:
+		printk(KERN_ERR "TPACKET version not supported\n");
+		BUG();
 	}
-	return h.raw;
+
+	smp_wmb();
 }
 
-static void __packet_set_status(struct packet_sock *po, void *frame, int status)
+static int __packet_get_status(struct packet_sock *po, void *frame)
 {
 	union {
 		struct tpacket_hdr *h1;
@@ -243,16 +254,66 @@ static void __packet_set_status(struct packet_sock *po, void *frame, int status)
 		void *raw;
 	} h;
 
+	smp_rmb();
+
 	h.raw = frame;
 	switch (po->tp_version) {
 	case TPACKET_V1:
-		h.h1->tp_status = status;
-		break;
+		flush_dcache_page(virt_to_page(&h.h1->tp_status));
+		return h.h1->tp_status;
 	case TPACKET_V2:
-		h.h2->tp_status = status;
-		break;
+		flush_dcache_page(virt_to_page(&h.h2->tp_status));
+		return h.h2->tp_status;
+	default:
+		printk(KERN_ERR "TPACKET version not supported\n");
+		BUG();
+		return 0;
 	}
 }
+
+static void *packet_lookup_frame(struct packet_sock *po,
+		struct packet_ring_buffer *rb,
+		unsigned int position,
+		int status)
+{
+	unsigned int pg_vec_pos, frame_offset;
+	union {
+		struct tpacket_hdr *h1;
+		struct tpacket2_hdr *h2;
+		void *raw;
+	} h;
+
+	pg_vec_pos = position / rb->frames_per_block;
+	frame_offset = position % rb->frames_per_block;
+
+	h.raw = rb->pg_vec[pg_vec_pos] + (frame_offset * rb->frame_size);
+
+	if (status != __packet_get_status(po, h.raw))
+		return NULL;
+
+	return h.raw;
+}
+
+static inline void *packet_current_frame(struct packet_sock *po,
+		struct packet_ring_buffer *rb,
+		int status)
+{
+	return packet_lookup_frame(po, rb, rb->head, status);
+}
+
+static inline void *packet_previous_frame(struct packet_sock *po,
+		struct packet_ring_buffer *rb,
+		int status)
+{
+	unsigned int previous = rb->head ? rb->head - 1 : rb->frame_max;
+	return packet_lookup_frame(po, rb, previous, status);
+}
+
+static inline void packet_increment_head(struct packet_ring_buffer *buff)
+{
+	buff->head = buff->head != buff->frame_max ? buff->head+1 : 0;
+}
+
 #endif
 
 static inline struct packet_sock *pkt_sk(struct sock *sk)
@@ -311,8 +372,7 @@ static int packet_rcv_spkt(struct sk_buff *skb, struct net_device *dev,  struct
 		goto oom;
 
 	/* drop any routing info */
-	dst_release(skb->dst);
-	skb->dst = NULL;
+	skb_dst_drop(skb);
 
 	/* drop conntrack reference */
 	nf_reset(skb);
@@ -560,8 +620,7 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev, struct packet
 
 	skb_set_owner_r(skb, sk);
 	skb->dev = NULL;
-	dst_release(skb->dst);
-	skb->dst = NULL;
+	skb_dst_drop(skb);
 
 	/* drop conntrack reference */
 	nf_reset(skb);
@@ -648,7 +707,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
 		macoff = netoff - maclen;
 	}
 
-	if (macoff + snaplen > po->frame_size) {
+	if (macoff + snaplen > po->rx_ring.frame_size) {
 		if (po->copy_thresh &&
 		    atomic_read(&sk->sk_rmem_alloc) + skb->truesize <
 		    (unsigned)sk->sk_rcvbuf) {
@@ -661,16 +720,16 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
 			if (copy_skb)
 				skb_set_owner_r(copy_skb, sk);
 		}
-		snaplen = po->frame_size - macoff;
+		snaplen = po->rx_ring.frame_size - macoff;
 		if ((int)snaplen < 0)
 			snaplen = 0;
 	}
 
 	spin_lock(&sk->sk_receive_queue.lock);
-	h.raw = packet_lookup_frame(po, po->head, TP_STATUS_KERNEL);
+	h.raw = packet_current_frame(po, &po->rx_ring, TP_STATUS_KERNEL);
 	if (!h.raw)
 		goto ring_is_full;
-	po->head = po->head != po->frame_max ? po->head+1 : 0;
+	packet_increment_head(&po->rx_ring);
 	po->stats.tp_packets++;
 	if (copy_skb) {
 		status |= TP_STATUS_COPY;
@@ -727,7 +786,6 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe
 
 	__packet_set_status(po, h.raw, status);
 	smp_mb();
-
 	{
 		struct page *p_start, *p_end;
 		u8 *h_end = h.raw + macoff + snaplen - 1;
@@ -760,10 +818,249 @@ ring_is_full:
 	goto drop_n_restore;
 }
 
-#endif
+static void tpacket_destruct_skb(struct sk_buff *skb)
+{
+	struct packet_sock *po = pkt_sk(skb->sk);
+	void * ph;
 
+	BUG_ON(skb == NULL);
 
-static int packet_sendmsg(struct kiocb *iocb, struct socket *sock,
+	if (likely(po->tx_ring.pg_vec)) {
+		ph = skb_shinfo(skb)->destructor_arg;
+		BUG_ON(__packet_get_status(po, ph) != TP_STATUS_SENDING);
+		BUG_ON(atomic_read(&po->tx_ring.pending) == 0);
+		atomic_dec(&po->tx_ring.pending);
+		__packet_set_status(po, ph, TP_STATUS_AVAILABLE);
+	}
+
+	sock_wfree(skb);
+}
+
+static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff * skb,
+		void * frame, struct net_device *dev, int size_max,
+		__be16 proto, unsigned char * addr)
+{
+	union {
+		struct tpacket_hdr *h1;
+		struct tpacket2_hdr *h2;
+		void *raw;
+	} ph;
+	int to_write, offset, len, tp_len, nr_frags, len_max;
+	struct socket *sock = po->sk.sk_socket;
+	struct page *page;
+	void *data;
+	int err;
+
+	ph.raw = frame;
+
+	skb->protocol = proto;
+	skb->dev = dev;
+	skb->priority = po->sk.sk_priority;
+	skb_shinfo(skb)->destructor_arg = ph.raw;
+
+	switch (po->tp_version) {
+	case TPACKET_V2:
+		tp_len = ph.h2->tp_len;
+		break;
+	default:
+		tp_len = ph.h1->tp_len;
+		break;
+	}
+	if (unlikely(tp_len > size_max)) {
+		printk(KERN_ERR "packet size is too long (%d > %d)\n",
+				tp_len, size_max);
+		return -EMSGSIZE;
+	}
+
+	skb_reserve(skb, LL_RESERVED_SPACE(dev));
+	skb_reset_network_header(skb);
+
+	data = ph.raw + po->tp_hdrlen - sizeof(struct sockaddr_ll);
+	to_write = tp_len;
+
+	if (sock->type == SOCK_DGRAM) {
+		err = dev_hard_header(skb, dev, ntohs(proto), addr,
+				NULL, tp_len);
+		if (unlikely(err < 0))
+			return -EINVAL;
+	} else if (dev->hard_header_len ) {
+		/* net device doesn't like empty head */
+		if (unlikely(tp_len <= dev->hard_header_len)) {
+			printk(KERN_ERR "packet size is too short "
+					"(%d < %d)\n", tp_len,
+					dev->hard_header_len);
+			return -EINVAL;
+		}
+
+		skb_push(skb, dev->hard_header_len);
+		err = skb_store_bits(skb, 0, data,
+				dev->hard_header_len);
+		if (unlikely(err))
+			return err;
+
+		data += dev->hard_header_len;
+		to_write -= dev->hard_header_len;
+	}
+
+	err = -EFAULT;
+	page = virt_to_page(data);
+	offset = offset_in_page(data);
+	len_max = PAGE_SIZE - offset;
+	len = ((to_write > len_max) ? len_max : to_write);
+
+	skb->data_len = to_write;
+	skb->len += to_write;
+	skb->truesize += to_write;
+	atomic_add(to_write, &po->sk.sk_wmem_alloc);
+
+	while (likely(to_write)) {
+		nr_frags = skb_shinfo(skb)->nr_frags;
+
+		if (unlikely(nr_frags >= MAX_SKB_FRAGS)) {
+			printk(KERN_ERR "Packet exceed the number "
+					"of skb frags(%lu)\n",
+					MAX_SKB_FRAGS);
+			return -EFAULT;
+		}
+
+		flush_dcache_page(page);
+		get_page(page);
+		skb_fill_page_desc(skb,
+				nr_frags,
+				page++, offset, len);
+		to_write -= len;
+		offset = 0;
+		len_max = PAGE_SIZE;
+		len = ((to_write > len_max) ? len_max : to_write);
+	}
+
+	return tp_len;
+}
+
+static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
+{
+	struct socket *sock;
+	struct sk_buff *skb;
+	struct net_device *dev;
+	__be16 proto;
+	int ifindex, err, reserve = 0;
+	void * ph;
+	struct sockaddr_ll *saddr=(struct sockaddr_ll *)msg->msg_name;
+	int tp_len, size_max;
+	unsigned char *addr;
+	int len_sum = 0;
+	int status = 0;
+
+	sock = po->sk.sk_socket;
+
+	mutex_lock(&po->pg_vec_lock);
+
+	err = -EBUSY;
+	if (saddr == NULL) {
+		ifindex	= po->ifindex;
+		proto	= po->num;
+		addr	= NULL;
+	} else {
+		err = -EINVAL;
+		if (msg->msg_namelen < sizeof(struct sockaddr_ll))
+			goto out;
+		if (msg->msg_namelen < (saddr->sll_halen
+					+ offsetof(struct sockaddr_ll,
+						sll_addr)))
+			goto out;
+		ifindex	= saddr->sll_ifindex;
+		proto	= saddr->sll_protocol;
+		addr	= saddr->sll_addr;
+	}
+
+	dev = dev_get_by_index(sock_net(&po->sk), ifindex);
+	err = -ENXIO;
+	if (unlikely(dev == NULL))
+		goto out;
+
+	reserve = dev->hard_header_len;
+
+	err = -ENETDOWN;
+	if (unlikely(!(dev->flags & IFF_UP)))
+		goto out_put;
+
+	size_max = po->tx_ring.frame_size
+		- sizeof(struct skb_shared_info)
+		- po->tp_hdrlen
+		- LL_ALLOCATED_SPACE(dev)
+		- sizeof(struct sockaddr_ll);
+
+	if (size_max > dev->mtu + reserve)
+		size_max = dev->mtu + reserve;
+
+	do {
+		ph = packet_current_frame(po, &po->tx_ring,
+				TP_STATUS_SEND_REQUEST);
+
+		if (unlikely(ph == NULL)) {
+			schedule();
+			continue;
+		}
+
+		status = TP_STATUS_SEND_REQUEST;
+		skb = sock_alloc_send_skb(&po->sk,
+				LL_ALLOCATED_SPACE(dev)
+				+ sizeof(struct sockaddr_ll),
+				0, &err);
+
+		if (unlikely(skb == NULL))
+			goto out_status;
+
+		tp_len = tpacket_fill_skb(po, skb, ph, dev, size_max, proto,
+				addr);
+
+		if (unlikely(tp_len < 0)) {
+			if (po->tp_loss) {
+				__packet_set_status(po, ph,
+						TP_STATUS_AVAILABLE);
+				packet_increment_head(&po->tx_ring);
+				kfree_skb(skb);
+				continue;
+			} else {
+				status = TP_STATUS_WRONG_FORMAT;
+				err = tp_len;
+				goto out_status;
+			}
+		}
+
+		skb->destructor = tpacket_destruct_skb;
+		__packet_set_status(po, ph, TP_STATUS_SENDING);
+		atomic_inc(&po->tx_ring.pending);
+
+		status = TP_STATUS_SEND_REQUEST;
+		err = dev_queue_xmit(skb);
+		if (unlikely(err > 0 && (err = net_xmit_errno(err)) != 0))
+			goto out_xmit;
+		packet_increment_head(&po->tx_ring);
+		len_sum += tp_len;
+	}
+	while (likely((ph != NULL) || ((!(msg->msg_flags & MSG_DONTWAIT))
+					&& (atomic_read(&po->tx_ring.pending))))
+	      );
+
+	err = len_sum;
+	goto out_put;
+
+out_xmit:
+	skb->destructor = sock_wfree;
+	atomic_dec(&po->tx_ring.pending);
+out_status:
+	__packet_set_status(po, ph, status);
+	kfree_skb(skb);
+out_put:
+	dev_put(dev);
+out:
+	mutex_unlock(&po->pg_vec_lock);
+	return err;
+}
+#endif
+
+static int packet_snd(struct socket *sock,
 			  struct msghdr *msg, size_t len)
 {
 	struct sock *sk = sock->sk;
@@ -854,6 +1151,19 @@ out:
 	return err;
 }
 
+static int packet_sendmsg(struct kiocb *iocb, struct socket *sock,
+		struct msghdr *msg, size_t len)
+{
+#ifdef CONFIG_PACKET_MMAP
+	struct sock *sk = sock->sk;
+	struct packet_sock *po = pkt_sk(sk);
+	if (po->tx_ring.pg_vec)
+		return tpacket_snd(po, msg);
+	else
+#endif
+		return packet_snd(sock, msg, len);
+}
+
 /*
  *	Close a PACKET socket. This is fairly simple. We immediately go
  *	to 'closed' state and remove our protocol entry in the device list.
@@ -864,6 +1174,9 @@ static int packet_release(struct socket *sock)
 	struct sock *sk = sock->sk;
 	struct packet_sock *po;
 	struct net *net;
+#ifdef CONFIG_PACKET_MMAP
+	struct tpacket_req req;
+#endif
 
 	if (!sk)
 		return 0;
@@ -893,11 +1206,13 @@ static int packet_release(struct socket *sock)
 	packet_flush_mclist(sk);
 
 #ifdef CONFIG_PACKET_MMAP
-	if (po->pg_vec) {
-		struct tpacket_req req;
-		memset(&req, 0, sizeof(req));
-		packet_set_ring(sk, &req, 1);
-	}
+	memset(&req, 0, sizeof(req));
+
+	if (po->rx_ring.pg_vec)
+		packet_set_ring(sk, &req, 1, 0);
+
+	if (po->tx_ring.pg_vec)
+		packet_set_ring(sk, &req, 1, 1);
 #endif
 
 	/*
@@ -1253,9 +1568,9 @@ static int packet_dev_mc(struct net_device *dev, struct packet_mclist *i,
 	switch (i->type) {
 	case PACKET_MR_MULTICAST:
 		if (what > 0)
-			dev_mc_add(dev, i->addr, i->alen, 0);
+			return dev_mc_add(dev, i->addr, i->alen, 0);
 		else
-			dev_mc_delete(dev, i->addr, i->alen, 0);
+			return dev_mc_delete(dev, i->addr, i->alen, 0);
 		break;
 	case PACKET_MR_PROMISC:
 		return dev_set_promiscuity(dev, what);
@@ -1263,6 +1578,12 @@ static int packet_dev_mc(struct net_device *dev, struct packet_mclist *i,
 	case PACKET_MR_ALLMULTI:
 		return dev_set_allmulti(dev, what);
 		break;
+	case PACKET_MR_UNICAST:
+		if (what > 0)
+			return dev_unicast_add(dev, i->addr);
+		else
+			return dev_unicast_delete(dev, i->addr);
+		break;
 	default:;
 	}
 	return 0;
@@ -1391,7 +1712,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 	if (level != SOL_PACKET)
 		return -ENOPROTOOPT;
 
-	switch(optname)	{
+	switch (optname) {
 	case PACKET_ADD_MEMBERSHIP:
 	case PACKET_DROP_MEMBERSHIP:
 	{
@@ -1415,6 +1736,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 
 #ifdef CONFIG_PACKET_MMAP
 	case PACKET_RX_RING:
+	case PACKET_TX_RING:
 	{
 		struct tpacket_req req;
 
@@ -1422,7 +1744,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 			return -EINVAL;
 		if (copy_from_user(&req,optval,sizeof(req)))
 			return -EFAULT;
-		return packet_set_ring(sk, &req, 0);
+		return packet_set_ring(sk, &req, 0, optname == PACKET_TX_RING);
 	}
 	case PACKET_COPY_THRESH:
 	{
@@ -1442,7 +1764,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 
 		if (optlen != sizeof(val))
 			return -EINVAL;
-		if (po->pg_vec)
+		if (po->rx_ring.pg_vec || po->tx_ring.pg_vec)
 			return -EBUSY;
 		if (copy_from_user(&val, optval, sizeof(val)))
 			return -EFAULT;
@@ -1461,13 +1783,26 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
 
 		if (optlen != sizeof(val))
 			return -EINVAL;
-		if (po->pg_vec)
+		if (po->rx_ring.pg_vec || po->tx_ring.pg_vec)
 			return -EBUSY;
 		if (copy_from_user(&val, optval, sizeof(val)))
 			return -EFAULT;
 		po->tp_reserve = val;
 		return 0;
 	}
+	case PACKET_LOSS:
+	{
+		unsigned int val;
+
+		if (optlen != sizeof(val))
+			return -EINVAL;
+		if (po->rx_ring.pg_vec || po->tx_ring.pg_vec)
+			return -EBUSY;
+		if (copy_from_user(&val, optval, sizeof(val)))
+			return -EFAULT;
+		po->tp_loss = !!val;
+		return 0;
+	}
 #endif
 	case PACKET_AUXDATA:
 	{
@@ -1517,7 +1852,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
 	if (len < 0)
 		return -EINVAL;
 
-	switch(optname)	{
+	switch (optname) {
 	case PACKET_STATISTICS:
 		if (len > sizeof(struct tpacket_stats))
 			len = sizeof(struct tpacket_stats);
@@ -1573,6 +1908,12 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
 		val = po->tp_reserve;
 		data = &val;
 		break;
+	case PACKET_LOSS:
+		if (len > sizeof(unsigned int))
+			len = sizeof(unsigned int);
+		val = po->tp_loss;
+		data = &val;
+		break;
 #endif
 	default:
 		return -ENOPROTOOPT;
@@ -1643,7 +1984,7 @@ static int packet_ioctl(struct socket *sock, unsigned int cmd,
 {
 	struct sock *sk = sock->sk;
 
-	switch(cmd) {
+	switch (cmd) {
 		case SIOCOUTQ:
 		{
 			int amount = atomic_read(&sk->sk_wmem_alloc);
@@ -1705,13 +2046,17 @@ static unsigned int packet_poll(struct file * file, struct socket *sock,
 	unsigned int mask = datagram_poll(file, sock, wait);
 
 	spin_lock_bh(&sk->sk_receive_queue.lock);
-	if (po->pg_vec) {
-		unsigned last = po->head ? po->head-1 : po->frame_max;
-
-		if (packet_lookup_frame(po, last, TP_STATUS_USER))
+	if (po->rx_ring.pg_vec) {
+		if (!packet_previous_frame(po, &po->rx_ring, TP_STATUS_KERNEL))
 			mask |= POLLIN | POLLRDNORM;
 	}
 	spin_unlock_bh(&sk->sk_receive_queue.lock);
+	spin_lock_bh(&sk->sk_write_queue.lock);
+	if (po->tx_ring.pg_vec) {
+		if (packet_current_frame(po, &po->tx_ring, TP_STATUS_AVAILABLE))
+			mask |= POLLOUT | POLLWRNORM;
+	}
+	spin_unlock_bh(&sk->sk_write_queue.lock);
 	return mask;
 }
 
@@ -1788,21 +2133,33 @@ out_free_pgvec:
 	goto out;
 }
 
-static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing)
+static int packet_set_ring(struct sock *sk, struct tpacket_req *req,
+		int closing, int tx_ring)
 {
 	char **pg_vec = NULL;
 	struct packet_sock *po = pkt_sk(sk);
 	int was_running, order = 0;
+	struct packet_ring_buffer *rb;
+	struct sk_buff_head *rb_queue;
 	__be16 num;
-	int err = 0;
+	int err;
 
-	if (req->tp_block_nr) {
-		int i;
+	rb = tx_ring ? &po->tx_ring : &po->rx_ring;
+	rb_queue = tx_ring ? &sk->sk_write_queue : &sk->sk_receive_queue;
 
-		/* Sanity tests and some calculations */
+	err = -EBUSY;
+	if (!closing) {
+		if (atomic_read(&po->mapped))
+			goto out;
+		if (atomic_read(&rb->pending))
+			goto out;
+	}
 
-		if (unlikely(po->pg_vec))
-			return -EBUSY;
+	if (req->tp_block_nr) {
+		/* Sanity tests and some calculations */
+		err = -EBUSY;
+		if (unlikely(rb->pg_vec))
+			goto out;
 
 		switch (po->tp_version) {
 		case TPACKET_V1:
@@ -1813,42 +2170,35 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing
 			break;
 		}
 
+		err = -EINVAL;
 		if (unlikely((int)req->tp_block_size <= 0))
-			return -EINVAL;
+			goto out;
 		if (unlikely(req->tp_block_size & (PAGE_SIZE - 1)))
-			return -EINVAL;
+			goto out;
 		if (unlikely(req->tp_frame_size < po->tp_hdrlen +
-						  po->tp_reserve))
-			return -EINVAL;
+					po->tp_reserve))
+			goto out;
 		if (unlikely(req->tp_frame_size & (TPACKET_ALIGNMENT - 1)))
-			return -EINVAL;
+			goto out;
 
-		po->frames_per_block = req->tp_block_size/req->tp_frame_size;
-		if (unlikely(po->frames_per_block <= 0))
-			return -EINVAL;
-		if (unlikely((po->frames_per_block * req->tp_block_nr) !=
-			     req->tp_frame_nr))
-			return -EINVAL;
+		rb->frames_per_block = req->tp_block_size/req->tp_frame_size;
+		if (unlikely(rb->frames_per_block <= 0))
+			goto out;
+		if (unlikely((rb->frames_per_block * req->tp_block_nr) !=
+					req->tp_frame_nr))
+			goto out;
 
 		err = -ENOMEM;
 		order = get_order(req->tp_block_size);
 		pg_vec = alloc_pg_vec(req, order);
 		if (unlikely(!pg_vec))
 			goto out;
-
-		for (i = 0; i < req->tp_block_nr; i++) {
-			void *ptr = pg_vec[i];
-			int k;
-
-			for (k = 0; k < po->frames_per_block; k++) {
-				__packet_set_status(po, ptr, TP_STATUS_KERNEL);
-				ptr += req->tp_frame_size;
-			}
-		}
-		/* Done */
-	} else {
+	}
+	/* Done */
+	else {
+		err = -EINVAL;
 		if (unlikely(req->tp_frame_nr))
-			return -EINVAL;
+			goto out;
 	}
 
 	lock_sock(sk);
@@ -1872,23 +2222,24 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req, int closing
 	if (closing || atomic_read(&po->mapped) == 0) {
 		err = 0;
 #define XC(a, b) ({ __typeof__ ((a)) __t; __t = (a); (a) = (b); __t; })
-
-		spin_lock_bh(&sk->sk_receive_queue.lock);
-		pg_vec = XC(po->pg_vec, pg_vec);
-		po->frame_max = (req->tp_frame_nr - 1);
-		po->head = 0;
-		po->frame_size = req->tp_frame_size;
-		spin_unlock_bh(&sk->sk_receive_queue.lock);
-
-		order = XC(po->pg_vec_order, order);
-		req->tp_block_nr = XC(po->pg_vec_len, req->tp_block_nr);
-
-		po->pg_vec_pages = req->tp_block_size/PAGE_SIZE;
-		po->prot_hook.func = po->pg_vec ? tpacket_rcv : packet_rcv;
-		skb_queue_purge(&sk->sk_receive_queue);
+		spin_lock_bh(&rb_queue->lock);
+		pg_vec = XC(rb->pg_vec, pg_vec);
+		rb->frame_max = (req->tp_frame_nr - 1);
+		rb->head = 0;
+		rb->frame_size = req->tp_frame_size;
+		spin_unlock_bh(&rb_queue->lock);
+
+		order = XC(rb->pg_vec_order, order);
+		req->tp_block_nr = XC(rb->pg_vec_len, req->tp_block_nr);
+
+		rb->pg_vec_pages = req->tp_block_size/PAGE_SIZE;
+		po->prot_hook.func = (po->rx_ring.pg_vec) ?
+						tpacket_rcv : packet_rcv;
+		skb_queue_purge(rb_queue);
 #undef XC
 		if (atomic_read(&po->mapped))
-			printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n", atomic_read(&po->mapped));
+			printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n",
+						atomic_read(&po->mapped));
 	}
 	mutex_unlock(&po->pg_vec_lock);
 
@@ -1909,11 +2260,13 @@ out:
 	return err;
 }
 
-static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_struct *vma)
+static int packet_mmap(struct file *file, struct socket *sock,
+		struct vm_area_struct *vma)
 {
 	struct sock *sk = sock->sk;
 	struct packet_sock *po = pkt_sk(sk);
-	unsigned long size;
+	unsigned long size, expected_size;
+	struct packet_ring_buffer *rb;
 	unsigned long start;
 	int err = -EINVAL;
 	int i;
@@ -1921,26 +2274,43 @@ static int packet_mmap(struct file *file, struct socket *sock, struct vm_area_st
 	if (vma->vm_pgoff)
 		return -EINVAL;
 
-	size = vma->vm_end - vma->vm_start;
-
 	mutex_lock(&po->pg_vec_lock);
-	if (po->pg_vec == NULL)
+
+	expected_size = 0;
+	for (rb = &po->rx_ring; rb <= &po->tx_ring; rb++) {
+		if (rb->pg_vec) {
+			expected_size += rb->pg_vec_len
+						* rb->pg_vec_pages
+						* PAGE_SIZE;
+		}
+	}
+
+	if (expected_size == 0)
 		goto out;
-	if (size != po->pg_vec_len*po->pg_vec_pages*PAGE_SIZE)
+
+	size = vma->vm_end - vma->vm_start;
+	if (size != expected_size)
 		goto out;
 
 	start = vma->vm_start;
-	for (i = 0; i < po->pg_vec_len; i++) {
-		struct page *page = virt_to_page(po->pg_vec[i]);
-		int pg_num;
-
-		for (pg_num = 0; pg_num < po->pg_vec_pages; pg_num++, page++) {
-			err = vm_insert_page(vma, start, page);
-			if (unlikely(err))
-				goto out;
-			start += PAGE_SIZE;
+	for (rb = &po->rx_ring; rb <= &po->tx_ring; rb++) {
+		if (rb->pg_vec == NULL)
+			continue;
+
+		for (i = 0; i < rb->pg_vec_len; i++) {
+			struct page *page = virt_to_page(rb->pg_vec[i]);
+			int pg_num;
+
+			for (pg_num = 0; pg_num < rb->pg_vec_pages;
+					pg_num++,page++) {
+				err = vm_insert_page(vma, start, page);
+				if (unlikely(err))
+					goto out;
+				start += PAGE_SIZE;
+			}
 		}
 	}
+
 	atomic_inc(&po->mapped);
 	vma->vm_ops = &packet_mmap_ops;
 	err = 0;
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index 4aa888584d2..480839dfc56 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -115,10 +115,10 @@ static int gprs_recv(struct gprs_dev *gp, struct sk_buff *skb)
 		rskb->truesize += rskb->len;
 
 		/* Avoid nested fragments */
-		for (fs = skb_shinfo(skb)->frag_list; fs; fs = fs->next)
+		skb_walk_frags(skb, fs)
 			flen += fs->len;
 		skb->next = skb_shinfo(skb)->frag_list;
-		skb_shinfo(skb)->frag_list = NULL;
+		skb_frag_list_init(skb);
 		skb->len -= flen;
 		skb->data_len -= flen;
 		skb->truesize -= flen;
@@ -212,8 +212,9 @@ static int gprs_xmit(struct sk_buff *skb, struct net_device *dev)
 		dev->stats.tx_bytes += len;
 	}
 
-	if (!pep_writeable(sk))
-		netif_stop_queue(dev);
+	netif_stop_queue(dev);
+	if (pep_writeable(sk))
+		netif_wake_queue(dev);
 	return 0;
 }
 
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 8ad2b533388..eef833ea6d7 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -940,10 +940,10 @@ int pep_write(struct sock *sk, struct sk_buff *skb)
 	rskb->truesize += rskb->len;
 
 	/* Avoid nested fragments */
-	for (fs = skb_shinfo(skb)->frag_list; fs; fs = fs->next)
+	skb_walk_frags(skb, fs)
 		flen += fs->len;
 	skb->next = skb_shinfo(skb)->frag_list;
-	skb_shinfo(skb)->frag_list = NULL;
+	skb_frag_list_init(skb);
 	skb->len -= flen;
 	skb->data_len -= flen;
 	skb->truesize -= flen;
diff --git a/net/rds/af_rds.c b/net/rds/af_rds.c
index 20cf16fc572..b11e7e52786 100644
--- a/net/rds/af_rds.c
+++ b/net/rds/af_rds.c
@@ -35,7 +35,6 @@
 #include <linux/kernel.h>
 #include <linux/in.h>
 #include <linux/poll.h>
-#include <linux/version.h>
 #include <net/sock.h>
 
 #include "rds.h"
diff --git a/net/rds/connection.c b/net/rds/connection.c
index 273f064930a..d14445c4830 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -148,14 +148,12 @@ static struct rds_connection *__rds_conn_create(__be32 laddr, __be32 faddr,
 	if (conn)
 		goto out;
 
-	conn = kmem_cache_alloc(rds_conn_slab, gfp);
+	conn = kmem_cache_zalloc(rds_conn_slab, gfp);
 	if (conn == NULL) {
 		conn = ERR_PTR(-ENOMEM);
 		goto out;
 	}
 
-	memset(conn, 0, sizeof(*conn));
-
 	INIT_HLIST_NODE(&conn->c_hash_node);
 	conn->c_version = RDS_PROTOCOL_3_0;
 	conn->c_laddr = laddr;
diff --git a/net/rds/ib.c b/net/rds/ib.c
index 4933b380985..b9bcd32431e 100644
--- a/net/rds/ib.c
+++ b/net/rds/ib.c
@@ -224,8 +224,8 @@ static int rds_ib_laddr_check(__be32 addr)
 	 * IB and iWARP capable NICs.
 	 */
 	cm_id = rdma_create_id(NULL, NULL, RDMA_PS_TCP);
-	if (!cm_id)
-		return -EADDRNOTAVAIL;
+	if (IS_ERR(cm_id))
+		return PTR_ERR(cm_id);
 
 	memset(&sin, 0, sizeof(sin));
 	sin.sin_family = AF_INET;
diff --git a/net/rds/ib.h b/net/rds/ib.h
index 069206cae73..455ae73047f 100644
--- a/net/rds/ib.h
+++ b/net/rds/ib.h
@@ -333,7 +333,7 @@ int rds_ib_xmit_rdma(struct rds_connection *conn, struct rds_rdma_op *op);
 void rds_ib_send_add_credits(struct rds_connection *conn, unsigned int credits);
 void rds_ib_advertise_credits(struct rds_connection *conn, unsigned int posted);
 int rds_ib_send_grab_credits(struct rds_ib_connection *ic, u32 wanted,
-			     u32 *adv_credits, int need_posted);
+			     u32 *adv_credits, int need_posted, int max_posted);
 
 /* ib_stats.c */
 DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats);
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index 36d931573ff..5709bad2832 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -524,7 +524,7 @@ void rds_ib_attempt_ack(struct rds_ib_connection *ic)
 	}
 
 	/* Can we get a send credit? */
-	if (!rds_ib_send_grab_credits(ic, 1, &adv_credits, 0)) {
+	if (!rds_ib_send_grab_credits(ic, 1, &adv_credits, 0, RDS_MAX_ADV_CREDIT)) {
 		rds_ib_stats_inc(s_ib_tx_throttle);
 		clear_bit(IB_ACK_IN_FLIGHT, &ic->i_ack_flags);
 		return;
diff --git a/net/rds/ib_ring.c b/net/rds/ib_ring.c
index 99a6ccae964..ff97e8eda85 100644
--- a/net/rds/ib_ring.c
+++ b/net/rds/ib_ring.c
@@ -137,7 +137,7 @@ int rds_ib_ring_empty(struct rds_ib_work_ring *ring)
 
 int rds_ib_ring_low(struct rds_ib_work_ring *ring)
 {
-	return __rds_ib_ring_used(ring) <= (ring->w_nr >> 2);
+	return __rds_ib_ring_used(ring) <= (ring->w_nr >> 1);
 }
 
 /*
diff --git a/net/rds/ib_send.c b/net/rds/ib_send.c
index cb6c52cb1c4..23bf830db2d 100644
--- a/net/rds/ib_send.c
+++ b/net/rds/ib_send.c
@@ -311,7 +311,7 @@ void rds_ib_send_cq_comp_handler(struct ib_cq *cq, void *context)
  * and using atomic_cmpxchg when updating the two counters.
  */
 int rds_ib_send_grab_credits(struct rds_ib_connection *ic,
-			     u32 wanted, u32 *adv_credits, int need_posted)
+			     u32 wanted, u32 *adv_credits, int need_posted, int max_posted)
 {
 	unsigned int avail, posted, got = 0, advertise;
 	long oldval, newval;
@@ -351,7 +351,7 @@ try_again:
 	 * available.
 	 */
 	if (posted && (got || need_posted)) {
-		advertise = min_t(unsigned int, posted, RDS_MAX_ADV_CREDIT);
+		advertise = min_t(unsigned int, posted, max_posted);
 		newval -= IB_SET_POST_CREDITS(advertise);
 	}
 
@@ -498,7 +498,7 @@ int rds_ib_xmit(struct rds_connection *conn, struct rds_message *rm,
 
 	credit_alloc = work_alloc;
 	if (ic->i_flowctl) {
-		credit_alloc = rds_ib_send_grab_credits(ic, work_alloc, &posted, 0);
+		credit_alloc = rds_ib_send_grab_credits(ic, work_alloc, &posted, 0, RDS_MAX_ADV_CREDIT);
 		adv_credits += posted;
 		if (credit_alloc < work_alloc) {
 			rds_ib_ring_unalloc(&ic->i_send_ring, work_alloc - credit_alloc);
@@ -506,7 +506,7 @@ int rds_ib_xmit(struct rds_connection *conn, struct rds_message *rm,
 			flow_controlled++;
 		}
 		if (work_alloc == 0) {
-			rds_ib_ring_unalloc(&ic->i_send_ring, work_alloc);
+			set_bit(RDS_LL_SEND_FULL, &conn->c_flags);
 			rds_ib_stats_inc(s_ib_tx_throttle);
 			ret = -ENOMEM;
 			goto out;
@@ -571,7 +571,7 @@ int rds_ib_xmit(struct rds_connection *conn, struct rds_message *rm,
 		/*
 		 * Update adv_credits since we reset the ACK_REQUIRED bit.
 		 */
-		rds_ib_send_grab_credits(ic, 0, &posted, 1);
+		rds_ib_send_grab_credits(ic, 0, &posted, 1, RDS_MAX_ADV_CREDIT - adv_credits);
 		adv_credits += posted;
 		BUG_ON(adv_credits > 255);
 	} else if (ic->i_rm != rm)
diff --git a/net/rds/info.c b/net/rds/info.c
index 1d885535214..62aeef37aef 100644
--- a/net/rds/info.c
+++ b/net/rds/info.c
@@ -188,10 +188,7 @@ int rds_info_getsockopt(struct socket *sock, int optname, char __user *optval,
 		ret = -ENOMEM;
 		goto out;
 	}
-	down_read(&current->mm->mmap_sem);
-	ret = get_user_pages(current, current->mm, start, nr_pages, 1, 0,
-			     pages, NULL);
-	up_read(&current->mm->mmap_sem);
+	ret = get_user_pages_fast(start, nr_pages, 1, pages);
 	if (ret != nr_pages) {
 		if (ret > 0)
 			nr_pages = ret;
diff --git a/net/rds/iw.c b/net/rds/iw.c
index b732efb5b63..d16e1cbc8e8 100644
--- a/net/rds/iw.c
+++ b/net/rds/iw.c
@@ -233,8 +233,8 @@ static int rds_iw_laddr_check(__be32 addr)
 	 * IB and iWARP capable NICs.
 	 */
 	cm_id = rdma_create_id(NULL, NULL, RDMA_PS_TCP);
-	if (!cm_id)
-		return -EADDRNOTAVAIL;
+	if (IS_ERR(cm_id))
+		return PTR_ERR(cm_id);
 
 	memset(&sin, 0, sizeof(sin));
 	sin.sin_family = AF_INET;
diff --git a/net/rds/iw.h b/net/rds/iw.h
index b4fb2725289..0715dde323e 100644
--- a/net/rds/iw.h
+++ b/net/rds/iw.h
@@ -361,7 +361,7 @@ int rds_iw_xmit_rdma(struct rds_connection *conn, struct rds_rdma_op *op);
 void rds_iw_send_add_credits(struct rds_connection *conn, unsigned int credits);
 void rds_iw_advertise_credits(struct rds_connection *conn, unsigned int posted);
 int rds_iw_send_grab_credits(struct rds_iw_connection *ic, u32 wanted,
-			     u32 *adv_credits, int need_posted);
+			     u32 *adv_credits, int need_posted, int max_posted);
 
 /* ib_stats.c */
 DECLARE_PER_CPU(struct rds_iw_statistics, rds_iw_stats);
diff --git a/net/rds/iw_recv.c b/net/rds/iw_recv.c
index fde470fa50d..8683f5f66c4 100644
--- a/net/rds/iw_recv.c
+++ b/net/rds/iw_recv.c
@@ -524,7 +524,7 @@ void rds_iw_attempt_ack(struct rds_iw_connection *ic)
 	}
 
 	/* Can we get a send credit? */
-	if (!rds_iw_send_grab_credits(ic, 1, &adv_credits, 0)) {
+	if (!rds_iw_send_grab_credits(ic, 1, &adv_credits, 0, RDS_MAX_ADV_CREDIT)) {
 		rds_iw_stats_inc(s_iw_tx_throttle);
 		clear_bit(IB_ACK_IN_FLIGHT, &ic->i_ack_flags);
 		return;
diff --git a/net/rds/iw_ring.c b/net/rds/iw_ring.c
index d422d4b5dee..da8e3b63f66 100644
--- a/net/rds/iw_ring.c
+++ b/net/rds/iw_ring.c
@@ -137,7 +137,7 @@ int rds_iw_ring_empty(struct rds_iw_work_ring *ring)
 
 int rds_iw_ring_low(struct rds_iw_work_ring *ring)
 {
-	return __rds_iw_ring_used(ring) <= (ring->w_nr >> 2);
+	return __rds_iw_ring_used(ring) <= (ring->w_nr >> 1);
 }
 
 
diff --git a/net/rds/iw_send.c b/net/rds/iw_send.c
index 22dd38ffd60..44a6a0551f2 100644
--- a/net/rds/iw_send.c
+++ b/net/rds/iw_send.c
@@ -347,7 +347,7 @@ void rds_iw_send_cq_comp_handler(struct ib_cq *cq, void *context)
  * and using atomic_cmpxchg when updating the two counters.
  */
 int rds_iw_send_grab_credits(struct rds_iw_connection *ic,
-			     u32 wanted, u32 *adv_credits, int need_posted)
+			     u32 wanted, u32 *adv_credits, int need_posted, int max_posted)
 {
 	unsigned int avail, posted, got = 0, advertise;
 	long oldval, newval;
@@ -387,7 +387,7 @@ try_again:
 	 * available.
 	 */
 	if (posted && (got || need_posted)) {
-		advertise = min_t(unsigned int, posted, RDS_MAX_ADV_CREDIT);
+		advertise = min_t(unsigned int, posted, max_posted);
 		newval -= IB_SET_POST_CREDITS(advertise);
 	}
 
@@ -541,7 +541,7 @@ int rds_iw_xmit(struct rds_connection *conn, struct rds_message *rm,
 
 	credit_alloc = work_alloc;
 	if (ic->i_flowctl) {
-		credit_alloc = rds_iw_send_grab_credits(ic, work_alloc, &posted, 0);
+		credit_alloc = rds_iw_send_grab_credits(ic, work_alloc, &posted, 0, RDS_MAX_ADV_CREDIT);
 		adv_credits += posted;
 		if (credit_alloc < work_alloc) {
 			rds_iw_ring_unalloc(&ic->i_send_ring, work_alloc - credit_alloc);
@@ -549,7 +549,7 @@ int rds_iw_xmit(struct rds_connection *conn, struct rds_message *rm,
 			flow_controlled++;
 		}
 		if (work_alloc == 0) {
-			rds_iw_ring_unalloc(&ic->i_send_ring, work_alloc);
+			set_bit(RDS_LL_SEND_FULL, &conn->c_flags);
 			rds_iw_stats_inc(s_iw_tx_throttle);
 			ret = -ENOMEM;
 			goto out;
@@ -614,7 +614,7 @@ int rds_iw_xmit(struct rds_connection *conn, struct rds_message *rm,
 		/*
 		 * Update adv_credits since we reset the ACK_REQUIRED bit.
 		 */
-		rds_iw_send_grab_credits(ic, 0, &posted, 1);
+		rds_iw_send_grab_credits(ic, 0, &posted, 1, RDS_MAX_ADV_CREDIT - adv_credits);
 		adv_credits += posted;
 		BUG_ON(adv_credits > 255);
 	} else if (ic->i_rm != rm)
diff --git a/net/rds/rdma.c b/net/rds/rdma.c
index eaeeb91e111..8dc83d2caa5 100644
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -150,12 +150,9 @@ static int rds_pin_pages(unsigned long user_addr, unsigned int nr_pages,
 {
 	int ret;
 
-	down_read(&current->mm->mmap_sem);
-	ret = get_user_pages(current, current->mm, user_addr,
-			     nr_pages, write, 0, pages, NULL);
-	up_read(&current->mm->mmap_sem);
+	ret = get_user_pages_fast(user_addr, nr_pages, write, pages);
 
-	if (0 <= ret && (unsigned) ret < nr_pages) {
+	if (ret >= 0 && ret < nr_pages) {
 		while (ret--)
 			put_page(pages[ret]);
 		ret = -EFAULT;
diff --git a/net/rds/rdma_transport.c b/net/rds/rdma_transport.c
index 7b19024f970..7d0f901c93d 100644
--- a/net/rds/rdma_transport.c
+++ b/net/rds/rdma_transport.c
@@ -34,7 +34,7 @@
 
 #include "rdma_transport.h"
 
-static struct rdma_cm_id *rds_iw_listen_id;
+static struct rdma_cm_id *rds_rdma_listen_id;
 
 int rds_rdma_cm_event_handler(struct rdma_cm_id *cm_id,
 			      struct rdma_cm_event *event)
@@ -161,7 +161,7 @@ static int __init rds_rdma_listen_init(void)
 
 	rdsdebug("cm %p listening on port %u\n", cm_id, RDS_PORT);
 
-	rds_iw_listen_id = cm_id;
+	rds_rdma_listen_id = cm_id;
 	cm_id = NULL;
 out:
 	if (cm_id)
@@ -171,10 +171,10 @@ out:
 
 static void rds_rdma_listen_stop(void)
 {
-	if (rds_iw_listen_id) {
-		rdsdebug("cm %p\n", rds_iw_listen_id);
-		rdma_destroy_id(rds_iw_listen_id);
-		rds_iw_listen_id = NULL;
+	if (rds_rdma_listen_id) {
+		rdsdebug("cm %p\n", rds_rdma_listen_id);
+		rdma_destroy_id(rds_rdma_listen_id);
+		rds_rdma_listen_id = NULL;
 	}
 }
 
diff --git a/net/rds/rds.h b/net/rds/rds.h
index 71794449ca4..dbe11123678 100644
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -132,7 +132,7 @@ struct rds_connection {
 #define RDS_FLAG_CONG_BITMAP	0x01
 #define RDS_FLAG_ACK_REQUIRED	0x02
 #define RDS_FLAG_RETRANSMITTED	0x04
-#define RDS_MAX_ADV_CREDIT	127
+#define RDS_MAX_ADV_CREDIT	255
 
 /*
  * Maximum space available for extension headers.
diff --git a/net/rds/send.c b/net/rds/send.c
index 104fe033203..a4a7f428cd7 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -854,11 +854,6 @@ int rds_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
 
 	rm->m_daddr = daddr;
 
-	/* Parse any control messages the user may have included. */
-	ret = rds_cmsg_send(rs, rm, msg, &allocated_mr);
-	if (ret)
-		goto out;
-
 	/* rds_conn_create has a spinlock that runs with IRQ off.
 	 * Caching the conn in the socket helps a lot. */
 	if (rs->rs_conn && rs->rs_conn->c_faddr == daddr)
@@ -874,6 +869,11 @@ int rds_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
 		rs->rs_conn = conn;
 	}
 
+	/* Parse any control messages the user may have included. */
+	ret = rds_cmsg_send(rs, rm, msg, &allocated_mr);
+	if (ret)
+		goto out;
+
 	if ((rm->m_rdma_cookie || rm->m_rdma_op)
 	 && conn->c_trans->xmit_rdma == NULL) {
 		if (printk_ratelimit())
diff --git a/net/rfkill/Kconfig b/net/rfkill/Kconfig
index 7f807b30cfb..eaf76587645 100644
--- a/net/rfkill/Kconfig
+++ b/net/rfkill/Kconfig
@@ -10,22 +10,15 @@ menuconfig RFKILL
 	  To compile this driver as a module, choose M here: the
 	  module will be called rfkill.
 
-config RFKILL_INPUT
-	tristate "Input layer to RF switch connector"
-	depends on RFKILL && INPUT
-	help
-	  Say Y here if you want kernel automatically toggle state
-	  of RF switches on and off when user presses appropriate
-	  button or a key on the keyboard. Without this module you
-	  need a some kind of userspace application to control
-	  state of the switches.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rfkill-input.
-
 # LED trigger support
 config RFKILL_LEDS
 	bool
-	depends on RFKILL && LEDS_TRIGGERS
+	depends on RFKILL
+	depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
 	default y
 
+config RFKILL_INPUT
+	bool "RF switch input support" if EMBEDDED
+	depends on RFKILL
+	depends on INPUT = y || RFKILL = INPUT
+	default y if !EMBEDDED
diff --git a/net/rfkill/Makefile b/net/rfkill/Makefile
index b38c430be05..66210535269 100644
--- a/net/rfkill/Makefile
+++ b/net/rfkill/Makefile
@@ -2,5 +2,6 @@
 # Makefile for the RF switch subsystem.
 #
 
-obj-$(CONFIG_RFKILL)			+= rfkill.o
-obj-$(CONFIG_RFKILL_INPUT)		+= rfkill-input.o
+rfkill-y			+= core.o
+rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
+obj-$(CONFIG_RFKILL)		+= rfkill.o
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
new file mode 100644
index 00000000000..4e68ab439d5
--- /dev/null
+++ b/net/rfkill/core.c
@@ -0,0 +1,1205 @@
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/capability.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/rfkill.h>
+#include <linux/spinlock.h>
+#include <linux/miscdevice.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/fs.h>
+
+#include "rfkill.h"
+
+#define POLL_INTERVAL		(5 * HZ)
+
+#define RFKILL_BLOCK_HW		BIT(0)
+#define RFKILL_BLOCK_SW		BIT(1)
+#define RFKILL_BLOCK_SW_PREV	BIT(2)
+#define RFKILL_BLOCK_ANY	(RFKILL_BLOCK_HW |\
+				 RFKILL_BLOCK_SW |\
+				 RFKILL_BLOCK_SW_PREV)
+#define RFKILL_BLOCK_SW_SETCALL	BIT(31)
+
+struct rfkill {
+	spinlock_t		lock;
+
+	const char		*name;
+	enum rfkill_type	type;
+
+	unsigned long		state;
+
+	u32			idx;
+
+	bool			registered;
+	bool			suspended;
+	bool			persistent;
+
+	const struct rfkill_ops	*ops;
+	void			*data;
+
+#ifdef CONFIG_RFKILL_LEDS
+	struct led_trigger	led_trigger;
+	const char		*ledtrigname;
+#endif
+
+	struct device		dev;
+	struct list_head	node;
+
+	struct delayed_work	poll_work;
+	struct work_struct	uevent_work;
+	struct work_struct	sync_work;
+};
+#define to_rfkill(d)	container_of(d, struct rfkill, dev)
+
+struct rfkill_int_event {
+	struct list_head	list;
+	struct rfkill_event	ev;
+};
+
+struct rfkill_data {
+	struct list_head	list;
+	struct list_head	events;
+	struct mutex		mtx;
+	wait_queue_head_t	read_wait;
+	bool			input_handler;
+};
+
+
+MODULE_AUTHOR("Ivo van Doorn <IvDoorn@gmail.com>");
+MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
+MODULE_DESCRIPTION("RF switch support");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * The locking here should be made much smarter, we currently have
+ * a bit of a stupid situation because drivers might want to register
+ * the rfkill struct under their own lock, and take this lock during
+ * rfkill method calls -- which will cause an AB-BA deadlock situation.
+ *
+ * To fix that, we need to rework this code here to be mostly lock-free
+ * and only use the mutex for list manipulations, not to protect the
+ * various other global variables. Then we can avoid holding the mutex
+ * around driver operations, and all is happy.
+ */
+static LIST_HEAD(rfkill_list);	/* list of registered rf switches */
+static DEFINE_MUTEX(rfkill_global_mutex);
+static LIST_HEAD(rfkill_fds);	/* list of open fds of /dev/rfkill */
+
+static unsigned int rfkill_default_state = 1;
+module_param_named(default_state, rfkill_default_state, uint, 0444);
+MODULE_PARM_DESC(default_state,
+		 "Default initial state for all radio types, 0 = radio off");
+
+static struct {
+	bool cur, sav;
+} rfkill_global_states[NUM_RFKILL_TYPES];
+
+static bool rfkill_epo_lock_active;
+
+
+#ifdef CONFIG_RFKILL_LEDS
+static void rfkill_led_trigger_event(struct rfkill *rfkill)
+{
+	struct led_trigger *trigger;
+
+	if (!rfkill->registered)
+		return;
+
+	trigger = &rfkill->led_trigger;
+
+	if (rfkill->state & RFKILL_BLOCK_ANY)
+		led_trigger_event(trigger, LED_OFF);
+	else
+		led_trigger_event(trigger, LED_FULL);
+}
+
+static void rfkill_led_trigger_activate(struct led_classdev *led)
+{
+	struct rfkill *rfkill;
+
+	rfkill = container_of(led->trigger, struct rfkill, led_trigger);
+
+	rfkill_led_trigger_event(rfkill);
+}
+
+const char *rfkill_get_led_trigger_name(struct rfkill *rfkill)
+{
+	return rfkill->led_trigger.name;
+}
+EXPORT_SYMBOL(rfkill_get_led_trigger_name);
+
+void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
+{
+	BUG_ON(!rfkill);
+
+	rfkill->ledtrigname = name;
+}
+EXPORT_SYMBOL(rfkill_set_led_trigger_name);
+
+static int rfkill_led_trigger_register(struct rfkill *rfkill)
+{
+	rfkill->led_trigger.name = rfkill->ledtrigname
+					? : dev_name(&rfkill->dev);
+	rfkill->led_trigger.activate = rfkill_led_trigger_activate;
+	return led_trigger_register(&rfkill->led_trigger);
+}
+
+static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
+{
+	led_trigger_unregister(&rfkill->led_trigger);
+}
+#else
+static void rfkill_led_trigger_event(struct rfkill *rfkill)
+{
+}
+
+static inline int rfkill_led_trigger_register(struct rfkill *rfkill)
+{
+	return 0;
+}
+
+static inline void rfkill_led_trigger_unregister(struct rfkill *rfkill)
+{
+}
+#endif /* CONFIG_RFKILL_LEDS */
+
+static void rfkill_fill_event(struct rfkill_event *ev, struct rfkill *rfkill,
+			      enum rfkill_operation op)
+{
+	unsigned long flags;
+
+	ev->idx = rfkill->idx;
+	ev->type = rfkill->type;
+	ev->op = op;
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	ev->hard = !!(rfkill->state & RFKILL_BLOCK_HW);
+	ev->soft = !!(rfkill->state & (RFKILL_BLOCK_SW |
+					RFKILL_BLOCK_SW_PREV));
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+}
+
+static void rfkill_send_events(struct rfkill *rfkill, enum rfkill_operation op)
+{
+	struct rfkill_data *data;
+	struct rfkill_int_event *ev;
+
+	list_for_each_entry(data, &rfkill_fds, list) {
+		ev = kzalloc(sizeof(*ev), GFP_KERNEL);
+		if (!ev)
+			continue;
+		rfkill_fill_event(&ev->ev, rfkill, op);
+		mutex_lock(&data->mtx);
+		list_add_tail(&ev->list, &data->events);
+		mutex_unlock(&data->mtx);
+		wake_up_interruptible(&data->read_wait);
+	}
+}
+
+static void rfkill_event(struct rfkill *rfkill)
+{
+	if (!rfkill->registered || rfkill->suspended)
+		return;
+
+	kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE);
+
+	/* also send event to /dev/rfkill */
+	rfkill_send_events(rfkill, RFKILL_OP_CHANGE);
+}
+
+static bool __rfkill_set_hw_state(struct rfkill *rfkill,
+				  bool blocked, bool *change)
+{
+	unsigned long flags;
+	bool prev, any;
+
+	BUG_ON(!rfkill);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	prev = !!(rfkill->state & RFKILL_BLOCK_HW);
+	if (blocked)
+		rfkill->state |= RFKILL_BLOCK_HW;
+	else
+		rfkill->state &= ~RFKILL_BLOCK_HW;
+	*change = prev != blocked;
+	any = rfkill->state & RFKILL_BLOCK_ANY;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	rfkill_led_trigger_event(rfkill);
+
+	return any;
+}
+
+/**
+ * rfkill_set_block - wrapper for set_block method
+ *
+ * @rfkill: the rfkill struct to use
+ * @blocked: the new software state
+ *
+ * Calls the set_block method (when applicable) and handles notifications
+ * etc. as well.
+ */
+static void rfkill_set_block(struct rfkill *rfkill, bool blocked)
+{
+	unsigned long flags;
+	int err;
+
+	/*
+	 * Some platforms (...!) generate input events which affect the
+	 * _hard_ kill state -- whenever something tries to change the
+	 * current software state query the hardware state too.
+	 */
+	if (rfkill->ops->query)
+		rfkill->ops->query(rfkill, rfkill->data);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	if (rfkill->state & RFKILL_BLOCK_SW)
+		rfkill->state |= RFKILL_BLOCK_SW_PREV;
+	else
+		rfkill->state &= ~RFKILL_BLOCK_SW_PREV;
+
+	if (blocked)
+		rfkill->state |= RFKILL_BLOCK_SW;
+	else
+		rfkill->state &= ~RFKILL_BLOCK_SW;
+
+	rfkill->state |= RFKILL_BLOCK_SW_SETCALL;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+		return;
+
+	err = rfkill->ops->set_block(rfkill->data, blocked);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	if (err) {
+		/*
+		 * Failed -- reset status to _prev, this may be different
+		 * from what set set _PREV to earlier in this function
+		 * if rfkill_set_sw_state was invoked.
+		 */
+		if (rfkill->state & RFKILL_BLOCK_SW_PREV)
+			rfkill->state |= RFKILL_BLOCK_SW;
+		else
+			rfkill->state &= ~RFKILL_BLOCK_SW;
+	}
+	rfkill->state &= ~RFKILL_BLOCK_SW_SETCALL;
+	rfkill->state &= ~RFKILL_BLOCK_SW_PREV;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	rfkill_led_trigger_event(rfkill);
+	rfkill_event(rfkill);
+}
+
+#ifdef CONFIG_RFKILL_INPUT
+static atomic_t rfkill_input_disabled = ATOMIC_INIT(0);
+
+/**
+ * __rfkill_switch_all - Toggle state of all switches of given type
+ * @type: type of interfaces to be affected
+ * @state: the new state
+ *
+ * This function sets the state of all switches of given type,
+ * unless a specific switch is claimed by userspace (in which case,
+ * that switch is left alone) or suspended.
+ *
+ * Caller must have acquired rfkill_global_mutex.
+ */
+static void __rfkill_switch_all(const enum rfkill_type type, bool blocked)
+{
+	struct rfkill *rfkill;
+
+	rfkill_global_states[type].cur = blocked;
+	list_for_each_entry(rfkill, &rfkill_list, node) {
+		if (rfkill->type != type)
+			continue;
+
+		rfkill_set_block(rfkill, blocked);
+	}
+}
+
+/**
+ * rfkill_switch_all - Toggle state of all switches of given type
+ * @type: type of interfaces to be affected
+ * @state: the new state
+ *
+ * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state).
+ * Please refer to __rfkill_switch_all() for details.
+ *
+ * Does nothing if the EPO lock is active.
+ */
+void rfkill_switch_all(enum rfkill_type type, bool blocked)
+{
+	if (atomic_read(&rfkill_input_disabled))
+		return;
+
+	mutex_lock(&rfkill_global_mutex);
+
+	if (!rfkill_epo_lock_active)
+		__rfkill_switch_all(type, blocked);
+
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+/**
+ * rfkill_epo - emergency power off all transmitters
+ *
+ * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
+ * ignoring everything in its path but rfkill_global_mutex and rfkill->mutex.
+ *
+ * The global state before the EPO is saved and can be restored later
+ * using rfkill_restore_states().
+ */
+void rfkill_epo(void)
+{
+	struct rfkill *rfkill;
+	int i;
+
+	if (atomic_read(&rfkill_input_disabled))
+		return;
+
+	mutex_lock(&rfkill_global_mutex);
+
+	rfkill_epo_lock_active = true;
+	list_for_each_entry(rfkill, &rfkill_list, node)
+		rfkill_set_block(rfkill, true);
+
+	for (i = 0; i < NUM_RFKILL_TYPES; i++) {
+		rfkill_global_states[i].sav = rfkill_global_states[i].cur;
+		rfkill_global_states[i].cur = true;
+	}
+
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+/**
+ * rfkill_restore_states - restore global states
+ *
+ * Restore (and sync switches to) the global state from the
+ * states in rfkill_default_states.  This can undo the effects of
+ * a call to rfkill_epo().
+ */
+void rfkill_restore_states(void)
+{
+	int i;
+
+	if (atomic_read(&rfkill_input_disabled))
+		return;
+
+	mutex_lock(&rfkill_global_mutex);
+
+	rfkill_epo_lock_active = false;
+	for (i = 0; i < NUM_RFKILL_TYPES; i++)
+		__rfkill_switch_all(i, rfkill_global_states[i].sav);
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+/**
+ * rfkill_remove_epo_lock - unlock state changes
+ *
+ * Used by rfkill-input manually unlock state changes, when
+ * the EPO switch is deactivated.
+ */
+void rfkill_remove_epo_lock(void)
+{
+	if (atomic_read(&rfkill_input_disabled))
+		return;
+
+	mutex_lock(&rfkill_global_mutex);
+	rfkill_epo_lock_active = false;
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+/**
+ * rfkill_is_epo_lock_active - returns true EPO is active
+ *
+ * Returns 0 (false) if there is NOT an active EPO contidion,
+ * and 1 (true) if there is an active EPO contition, which
+ * locks all radios in one of the BLOCKED states.
+ *
+ * Can be called in atomic context.
+ */
+bool rfkill_is_epo_lock_active(void)
+{
+	return rfkill_epo_lock_active;
+}
+
+/**
+ * rfkill_get_global_sw_state - returns global state for a type
+ * @type: the type to get the global state of
+ *
+ * Returns the current global state for a given wireless
+ * device type.
+ */
+bool rfkill_get_global_sw_state(const enum rfkill_type type)
+{
+	return rfkill_global_states[type].cur;
+}
+#endif
+
+
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked)
+{
+	bool ret, change;
+
+	ret = __rfkill_set_hw_state(rfkill, blocked, &change);
+
+	if (!rfkill->registered)
+		return ret;
+
+	if (change)
+		schedule_work(&rfkill->uevent_work);
+
+	return ret;
+}
+EXPORT_SYMBOL(rfkill_set_hw_state);
+
+static void __rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
+{
+	u32 bit = RFKILL_BLOCK_SW;
+
+	/* if in a ops->set_block right now, use other bit */
+	if (rfkill->state & RFKILL_BLOCK_SW_SETCALL)
+		bit = RFKILL_BLOCK_SW_PREV;
+
+	if (blocked)
+		rfkill->state |= bit;
+	else
+		rfkill->state &= ~bit;
+}
+
+bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
+{
+	unsigned long flags;
+	bool prev, hwblock;
+
+	BUG_ON(!rfkill);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	prev = !!(rfkill->state & RFKILL_BLOCK_SW);
+	__rfkill_set_sw_state(rfkill, blocked);
+	hwblock = !!(rfkill->state & RFKILL_BLOCK_HW);
+	blocked = blocked || hwblock;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	if (!rfkill->registered) {
+		rfkill->persistent = true;
+	} else {
+		if (prev != blocked && !hwblock)
+			schedule_work(&rfkill->uevent_work);
+
+		rfkill_led_trigger_event(rfkill);
+	}
+
+	return blocked;
+}
+EXPORT_SYMBOL(rfkill_set_sw_state);
+
+void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
+{
+	unsigned long flags;
+	bool swprev, hwprev;
+
+	BUG_ON(!rfkill);
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+
+	/*
+	 * No need to care about prev/setblock ... this is for uevent only
+	 * and that will get triggered by rfkill_set_block anyway.
+	 */
+	swprev = !!(rfkill->state & RFKILL_BLOCK_SW);
+	hwprev = !!(rfkill->state & RFKILL_BLOCK_HW);
+	__rfkill_set_sw_state(rfkill, sw);
+
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	if (!rfkill->registered) {
+		rfkill->persistent = true;
+	} else {
+		if (swprev != sw || hwprev != hw)
+			schedule_work(&rfkill->uevent_work);
+
+		rfkill_led_trigger_event(rfkill);
+	}
+}
+EXPORT_SYMBOL(rfkill_set_states);
+
+static ssize_t rfkill_name_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	return sprintf(buf, "%s\n", rfkill->name);
+}
+
+static const char *rfkill_get_type_str(enum rfkill_type type)
+{
+	switch (type) {
+	case RFKILL_TYPE_WLAN:
+		return "wlan";
+	case RFKILL_TYPE_BLUETOOTH:
+		return "bluetooth";
+	case RFKILL_TYPE_UWB:
+		return "ultrawideband";
+	case RFKILL_TYPE_WIMAX:
+		return "wimax";
+	case RFKILL_TYPE_WWAN:
+		return "wwan";
+	default:
+		BUG();
+	}
+
+	BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_WWAN + 1);
+}
+
+static ssize_t rfkill_type_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type));
+}
+
+static ssize_t rfkill_idx_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	return sprintf(buf, "%d\n", rfkill->idx);
+}
+
+static u8 user_state_from_blocked(unsigned long state)
+{
+	if (state & RFKILL_BLOCK_HW)
+		return RFKILL_USER_STATE_HARD_BLOCKED;
+	if (state & RFKILL_BLOCK_SW)
+		return RFKILL_USER_STATE_SOFT_BLOCKED;
+
+	return RFKILL_USER_STATE_UNBLOCKED;
+}
+
+static ssize_t rfkill_state_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+	unsigned long flags;
+	u32 state;
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	state = rfkill->state;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	return sprintf(buf, "%d\n", user_state_from_blocked(state));
+}
+
+static ssize_t rfkill_state_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	/*
+	 * The intention was that userspace can only take control over
+	 * a given device when/if rfkill-input doesn't control it due
+	 * to user_claim. Since user_claim is currently unsupported,
+	 * we never support changing the state from userspace -- this
+	 * can be implemented again later.
+	 */
+
+	return -EPERM;
+}
+
+static ssize_t rfkill_claim_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	return sprintf(buf, "%d\n", 0);
+}
+
+static ssize_t rfkill_claim_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	return -EOPNOTSUPP;
+}
+
+static struct device_attribute rfkill_dev_attrs[] = {
+	__ATTR(name, S_IRUGO, rfkill_name_show, NULL),
+	__ATTR(type, S_IRUGO, rfkill_type_show, NULL),
+	__ATTR(index, S_IRUGO, rfkill_idx_show, NULL),
+	__ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store),
+	__ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store),
+	__ATTR_NULL
+};
+
+static void rfkill_release(struct device *dev)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	kfree(rfkill);
+}
+
+static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+	unsigned long flags;
+	u32 state;
+	int error;
+
+	error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name);
+	if (error)
+		return error;
+	error = add_uevent_var(env, "RFKILL_TYPE=%s",
+			       rfkill_get_type_str(rfkill->type));
+	if (error)
+		return error;
+	spin_lock_irqsave(&rfkill->lock, flags);
+	state = rfkill->state;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+	error = add_uevent_var(env, "RFKILL_STATE=%d",
+			       user_state_from_blocked(state));
+	return error;
+}
+
+void rfkill_pause_polling(struct rfkill *rfkill)
+{
+	BUG_ON(!rfkill);
+
+	if (!rfkill->ops->poll)
+		return;
+
+	cancel_delayed_work_sync(&rfkill->poll_work);
+}
+EXPORT_SYMBOL(rfkill_pause_polling);
+
+void rfkill_resume_polling(struct rfkill *rfkill)
+{
+	BUG_ON(!rfkill);
+
+	if (!rfkill->ops->poll)
+		return;
+
+	schedule_work(&rfkill->poll_work.work);
+}
+EXPORT_SYMBOL(rfkill_resume_polling);
+
+static int rfkill_suspend(struct device *dev, pm_message_t state)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+
+	rfkill_pause_polling(rfkill);
+
+	rfkill->suspended = true;
+
+	return 0;
+}
+
+static int rfkill_resume(struct device *dev)
+{
+	struct rfkill *rfkill = to_rfkill(dev);
+	bool cur;
+
+	cur = !!(rfkill->state & RFKILL_BLOCK_SW);
+	rfkill_set_block(rfkill, cur);
+
+	rfkill->suspended = false;
+
+	rfkill_resume_polling(rfkill);
+
+	return 0;
+}
+
+static struct class rfkill_class = {
+	.name		= "rfkill",
+	.dev_release	= rfkill_release,
+	.dev_attrs	= rfkill_dev_attrs,
+	.dev_uevent	= rfkill_dev_uevent,
+	.suspend	= rfkill_suspend,
+	.resume		= rfkill_resume,
+};
+
+bool rfkill_blocked(struct rfkill *rfkill)
+{
+	unsigned long flags;
+	u32 state;
+
+	spin_lock_irqsave(&rfkill->lock, flags);
+	state = rfkill->state;
+	spin_unlock_irqrestore(&rfkill->lock, flags);
+
+	return !!(state & RFKILL_BLOCK_ANY);
+}
+EXPORT_SYMBOL(rfkill_blocked);
+
+
+struct rfkill * __must_check rfkill_alloc(const char *name,
+					  struct device *parent,
+					  const enum rfkill_type type,
+					  const struct rfkill_ops *ops,
+					  void *ops_data)
+{
+	struct rfkill *rfkill;
+	struct device *dev;
+
+	if (WARN_ON(!ops))
+		return NULL;
+
+	if (WARN_ON(!ops->set_block))
+		return NULL;
+
+	if (WARN_ON(!name))
+		return NULL;
+
+	if (WARN_ON(type == RFKILL_TYPE_ALL || type >= NUM_RFKILL_TYPES))
+		return NULL;
+
+	rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL);
+	if (!rfkill)
+		return NULL;
+
+	spin_lock_init(&rfkill->lock);
+	INIT_LIST_HEAD(&rfkill->node);
+	rfkill->type = type;
+	rfkill->name = name;
+	rfkill->ops = ops;
+	rfkill->data = ops_data;
+
+	dev = &rfkill->dev;
+	dev->class = &rfkill_class;
+	dev->parent = parent;
+	device_initialize(dev);
+
+	return rfkill;
+}
+EXPORT_SYMBOL(rfkill_alloc);
+
+static void rfkill_poll(struct work_struct *work)
+{
+	struct rfkill *rfkill;
+
+	rfkill = container_of(work, struct rfkill, poll_work.work);
+
+	/*
+	 * Poll hardware state -- driver will use one of the
+	 * rfkill_set{,_hw,_sw}_state functions and use its
+	 * return value to update the current status.
+	 */
+	rfkill->ops->poll(rfkill, rfkill->data);
+
+	schedule_delayed_work(&rfkill->poll_work,
+		round_jiffies_relative(POLL_INTERVAL));
+}
+
+static void rfkill_uevent_work(struct work_struct *work)
+{
+	struct rfkill *rfkill;
+
+	rfkill = container_of(work, struct rfkill, uevent_work);
+
+	mutex_lock(&rfkill_global_mutex);
+	rfkill_event(rfkill);
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+static void rfkill_sync_work(struct work_struct *work)
+{
+	struct rfkill *rfkill;
+	bool cur;
+
+	rfkill = container_of(work, struct rfkill, sync_work);
+
+	mutex_lock(&rfkill_global_mutex);
+	cur = rfkill_global_states[rfkill->type].cur;
+	rfkill_set_block(rfkill, cur);
+	mutex_unlock(&rfkill_global_mutex);
+}
+
+int __must_check rfkill_register(struct rfkill *rfkill)
+{
+	static unsigned long rfkill_no;
+	struct device *dev = &rfkill->dev;
+	int error;
+
+	BUG_ON(!rfkill);
+
+	mutex_lock(&rfkill_global_mutex);
+
+	if (rfkill->registered) {
+		error = -EALREADY;
+		goto unlock;
+	}
+
+	rfkill->idx = rfkill_no;
+	dev_set_name(dev, "rfkill%lu", rfkill_no);
+	rfkill_no++;
+
+	list_add_tail(&rfkill->node, &rfkill_list);
+
+	error = device_add(dev);
+	if (error)
+		goto remove;
+
+	error = rfkill_led_trigger_register(rfkill);
+	if (error)
+		goto devdel;
+
+	rfkill->registered = true;
+
+	INIT_DELAYED_WORK(&rfkill->poll_work, rfkill_poll);
+	INIT_WORK(&rfkill->uevent_work, rfkill_uevent_work);
+	INIT_WORK(&rfkill->sync_work, rfkill_sync_work);
+
+	if (rfkill->ops->poll)
+		schedule_delayed_work(&rfkill->poll_work,
+			round_jiffies_relative(POLL_INTERVAL));
+
+	if (!rfkill->persistent || rfkill_epo_lock_active) {
+		schedule_work(&rfkill->sync_work);
+	} else {
+#ifdef CONFIG_RFKILL_INPUT
+		bool soft_blocked = !!(rfkill->state & RFKILL_BLOCK_SW);
+
+		if (!atomic_read(&rfkill_input_disabled))
+			__rfkill_switch_all(rfkill->type, soft_blocked);
+#endif
+	}
+
+	rfkill_send_events(rfkill, RFKILL_OP_ADD);
+
+	mutex_unlock(&rfkill_global_mutex);
+	return 0;
+
+ devdel:
+	device_del(&rfkill->dev);
+ remove:
+	list_del_init(&rfkill->node);
+ unlock:
+	mutex_unlock(&rfkill_global_mutex);
+	return error;
+}
+EXPORT_SYMBOL(rfkill_register);
+
+void rfkill_unregister(struct rfkill *rfkill)
+{
+	BUG_ON(!rfkill);
+
+	if (rfkill->ops->poll)
+		cancel_delayed_work_sync(&rfkill->poll_work);
+
+	cancel_work_sync(&rfkill->uevent_work);
+	cancel_work_sync(&rfkill->sync_work);
+
+	rfkill->registered = false;
+
+	device_del(&rfkill->dev);
+
+	mutex_lock(&rfkill_global_mutex);
+	rfkill_send_events(rfkill, RFKILL_OP_DEL);
+	list_del_init(&rfkill->node);
+	mutex_unlock(&rfkill_global_mutex);
+
+	rfkill_led_trigger_unregister(rfkill);
+}
+EXPORT_SYMBOL(rfkill_unregister);
+
+void rfkill_destroy(struct rfkill *rfkill)
+{
+	if (rfkill)
+		put_device(&rfkill->dev);
+}
+EXPORT_SYMBOL(rfkill_destroy);
+
+static int rfkill_fop_open(struct inode *inode, struct file *file)
+{
+	struct rfkill_data *data;
+	struct rfkill *rfkill;
+	struct rfkill_int_event *ev, *tmp;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&data->events);
+	mutex_init(&data->mtx);
+	init_waitqueue_head(&data->read_wait);
+
+	mutex_lock(&rfkill_global_mutex);
+	mutex_lock(&data->mtx);
+	/*
+	 * start getting events from elsewhere but hold mtx to get
+	 * startup events added first
+	 */
+	list_add(&data->list, &rfkill_fds);
+
+	list_for_each_entry(rfkill, &rfkill_list, node) {
+		ev = kzalloc(sizeof(*ev), GFP_KERNEL);
+		if (!ev)
+			goto free;
+		rfkill_fill_event(&ev->ev, rfkill, RFKILL_OP_ADD);
+		list_add_tail(&ev->list, &data->events);
+	}
+	mutex_unlock(&data->mtx);
+	mutex_unlock(&rfkill_global_mutex);
+
+	file->private_data = data;
+
+	return nonseekable_open(inode, file);
+
+ free:
+	mutex_unlock(&data->mtx);
+	mutex_unlock(&rfkill_global_mutex);
+	mutex_destroy(&data->mtx);
+	list_for_each_entry_safe(ev, tmp, &data->events, list)
+		kfree(ev);
+	kfree(data);
+	return -ENOMEM;
+}
+
+static unsigned int rfkill_fop_poll(struct file *file, poll_table *wait)
+{
+	struct rfkill_data *data = file->private_data;
+	unsigned int res = POLLOUT | POLLWRNORM;
+
+	poll_wait(file, &data->read_wait, wait);
+
+	mutex_lock(&data->mtx);
+	if (!list_empty(&data->events))
+		res = POLLIN | POLLRDNORM;
+	mutex_unlock(&data->mtx);
+
+	return res;
+}
+
+static bool rfkill_readable(struct rfkill_data *data)
+{
+	bool r;
+
+	mutex_lock(&data->mtx);
+	r = !list_empty(&data->events);
+	mutex_unlock(&data->mtx);
+
+	return r;
+}
+
+static ssize_t rfkill_fop_read(struct file *file, char __user *buf,
+			       size_t count, loff_t *pos)
+{
+	struct rfkill_data *data = file->private_data;
+	struct rfkill_int_event *ev;
+	unsigned long sz;
+	int ret;
+
+	mutex_lock(&data->mtx);
+
+	while (list_empty(&data->events)) {
+		if (file->f_flags & O_NONBLOCK) {
+			ret = -EAGAIN;
+			goto out;
+		}
+		mutex_unlock(&data->mtx);
+		ret = wait_event_interruptible(data->read_wait,
+					       rfkill_readable(data));
+		mutex_lock(&data->mtx);
+
+		if (ret)
+			goto out;
+	}
+
+	ev = list_first_entry(&data->events, struct rfkill_int_event,
+				list);
+
+	sz = min_t(unsigned long, sizeof(ev->ev), count);
+	ret = sz;
+	if (copy_to_user(buf, &ev->ev, sz))
+		ret = -EFAULT;
+
+	list_del(&ev->list);
+	kfree(ev);
+ out:
+	mutex_unlock(&data->mtx);
+	return ret;
+}
+
+static ssize_t rfkill_fop_write(struct file *file, const char __user *buf,
+				size_t count, loff_t *pos)
+{
+	struct rfkill *rfkill;
+	struct rfkill_event ev;
+
+	/* we don't need the 'hard' variable but accept it */
+	if (count < sizeof(ev) - 1)
+		return -EINVAL;
+
+	if (copy_from_user(&ev, buf, sizeof(ev) - 1))
+		return -EFAULT;
+
+	if (ev.op != RFKILL_OP_CHANGE && ev.op != RFKILL_OP_CHANGE_ALL)
+		return -EINVAL;
+
+	if (ev.type >= NUM_RFKILL_TYPES)
+		return -EINVAL;
+
+	mutex_lock(&rfkill_global_mutex);
+
+	if (ev.op == RFKILL_OP_CHANGE_ALL) {
+		if (ev.type == RFKILL_TYPE_ALL) {
+			enum rfkill_type i;
+			for (i = 0; i < NUM_RFKILL_TYPES; i++)
+				rfkill_global_states[i].cur = ev.soft;
+		} else {
+			rfkill_global_states[ev.type].cur = ev.soft;
+		}
+	}
+
+	list_for_each_entry(rfkill, &rfkill_list, node) {
+		if (rfkill->idx != ev.idx && ev.op != RFKILL_OP_CHANGE_ALL)
+			continue;
+
+		if (rfkill->type != ev.type && ev.type != RFKILL_TYPE_ALL)
+			continue;
+
+		rfkill_set_block(rfkill, ev.soft);
+	}
+	mutex_unlock(&rfkill_global_mutex);
+
+	return count;
+}
+
+static int rfkill_fop_release(struct inode *inode, struct file *file)
+{
+	struct rfkill_data *data = file->private_data;
+	struct rfkill_int_event *ev, *tmp;
+
+	mutex_lock(&rfkill_global_mutex);
+	list_del(&data->list);
+	mutex_unlock(&rfkill_global_mutex);
+
+	mutex_destroy(&data->mtx);
+	list_for_each_entry_safe(ev, tmp, &data->events, list)
+		kfree(ev);
+
+#ifdef CONFIG_RFKILL_INPUT
+	if (data->input_handler)
+		if (atomic_dec_return(&rfkill_input_disabled) == 0)
+			printk(KERN_DEBUG "rfkill: input handler enabled\n");
+#endif
+
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_RFKILL_INPUT
+static long rfkill_fop_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	struct rfkill_data *data = file->private_data;
+
+	if (_IOC_TYPE(cmd) != RFKILL_IOC_MAGIC)
+		return -ENOSYS;
+
+	if (_IOC_NR(cmd) != RFKILL_IOC_NOINPUT)
+		return -ENOSYS;
+
+	mutex_lock(&data->mtx);
+
+	if (!data->input_handler) {
+		if (atomic_inc_return(&rfkill_input_disabled) == 1)
+			printk(KERN_DEBUG "rfkill: input handler disabled\n");
+		data->input_handler = true;
+	}
+
+	mutex_unlock(&data->mtx);
+
+	return 0;
+}
+#endif
+
+static const struct file_operations rfkill_fops = {
+	.open		= rfkill_fop_open,
+	.read		= rfkill_fop_read,
+	.write		= rfkill_fop_write,
+	.poll		= rfkill_fop_poll,
+	.release	= rfkill_fop_release,
+#ifdef CONFIG_RFKILL_INPUT
+	.unlocked_ioctl	= rfkill_fop_ioctl,
+	.compat_ioctl	= rfkill_fop_ioctl,
+#endif
+};
+
+static struct miscdevice rfkill_miscdev = {
+	.name	= "rfkill",
+	.fops	= &rfkill_fops,
+	.minor	= MISC_DYNAMIC_MINOR,
+};
+
+static int __init rfkill_init(void)
+{
+	int error;
+	int i;
+
+	for (i = 0; i < NUM_RFKILL_TYPES; i++)
+		rfkill_global_states[i].cur = !rfkill_default_state;
+
+	error = class_register(&rfkill_class);
+	if (error)
+		goto out;
+
+	error = misc_register(&rfkill_miscdev);
+	if (error) {
+		class_unregister(&rfkill_class);
+		goto out;
+	}
+
+#ifdef CONFIG_RFKILL_INPUT
+	error = rfkill_handler_init();
+	if (error) {
+		misc_deregister(&rfkill_miscdev);
+		class_unregister(&rfkill_class);
+		goto out;
+	}
+#endif
+
+ out:
+	return error;
+}
+subsys_initcall(rfkill_init);
+
+static void __exit rfkill_exit(void)
+{
+#ifdef CONFIG_RFKILL_INPUT
+	rfkill_handler_exit();
+#endif
+	misc_deregister(&rfkill_miscdev);
+	class_unregister(&rfkill_class);
+}
+module_exit(rfkill_exit);
diff --git a/net/rfkill/input.c b/net/rfkill/input.c
new file mode 100644
index 00000000000..a7295ad5f9c
--- /dev/null
+++ b/net/rfkill/input.c
@@ -0,0 +1,342 @@
+/*
+ * Input layer to RF Kill interface connector
+ *
+ * Copyright (c) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * If you ever run into a situation in which you have a SW_ type rfkill
+ * input device, then you can revive code that was removed in the patch
+ * "rfkill-input: remove unused code".
+ */
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/init.h>
+#include <linux/rfkill.h>
+#include <linux/sched.h>
+
+#include "rfkill.h"
+
+enum rfkill_input_master_mode {
+	RFKILL_INPUT_MASTER_UNLOCK = 0,
+	RFKILL_INPUT_MASTER_RESTORE = 1,
+	RFKILL_INPUT_MASTER_UNBLOCKALL = 2,
+	NUM_RFKILL_INPUT_MASTER_MODES
+};
+
+/* Delay (in ms) between consecutive switch ops */
+#define RFKILL_OPS_DELAY 200
+
+static enum rfkill_input_master_mode rfkill_master_switch_mode =
+					RFKILL_INPUT_MASTER_UNBLOCKALL;
+module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0);
+MODULE_PARM_DESC(master_switch_mode,
+	"SW_RFKILL_ALL ON should: 0=do nothing (only unlock); 1=restore; 2=unblock all");
+
+static spinlock_t rfkill_op_lock;
+static bool rfkill_op_pending;
+static unsigned long rfkill_sw_pending[BITS_TO_LONGS(NUM_RFKILL_TYPES)];
+static unsigned long rfkill_sw_state[BITS_TO_LONGS(NUM_RFKILL_TYPES)];
+
+enum rfkill_sched_op {
+	RFKILL_GLOBAL_OP_EPO = 0,
+	RFKILL_GLOBAL_OP_RESTORE,
+	RFKILL_GLOBAL_OP_UNLOCK,
+	RFKILL_GLOBAL_OP_UNBLOCK,
+};
+
+static enum rfkill_sched_op rfkill_master_switch_op;
+static enum rfkill_sched_op rfkill_op;
+
+static void __rfkill_handle_global_op(enum rfkill_sched_op op)
+{
+	unsigned int i;
+
+	switch (op) {
+	case RFKILL_GLOBAL_OP_EPO:
+		rfkill_epo();
+		break;
+	case RFKILL_GLOBAL_OP_RESTORE:
+		rfkill_restore_states();
+		break;
+	case RFKILL_GLOBAL_OP_UNLOCK:
+		rfkill_remove_epo_lock();
+		break;
+	case RFKILL_GLOBAL_OP_UNBLOCK:
+		rfkill_remove_epo_lock();
+		for (i = 0; i < NUM_RFKILL_TYPES; i++)
+			rfkill_switch_all(i, false);
+		break;
+	default:
+		/* memory corruption or bug, fail safely */
+		rfkill_epo();
+		WARN(1, "Unknown requested operation %d! "
+			"rfkill Emergency Power Off activated\n",
+			op);
+	}
+}
+
+static void __rfkill_handle_normal_op(const enum rfkill_type type,
+				      const bool complement)
+{
+	bool blocked;
+
+	blocked = rfkill_get_global_sw_state(type);
+	if (complement)
+		blocked = !blocked;
+
+	rfkill_switch_all(type, blocked);
+}
+
+static void rfkill_op_handler(struct work_struct *work)
+{
+	unsigned int i;
+	bool c;
+
+	spin_lock_irq(&rfkill_op_lock);
+	do {
+		if (rfkill_op_pending) {
+			enum rfkill_sched_op op = rfkill_op;
+			rfkill_op_pending = false;
+			memset(rfkill_sw_pending, 0,
+				sizeof(rfkill_sw_pending));
+			spin_unlock_irq(&rfkill_op_lock);
+
+			__rfkill_handle_global_op(op);
+
+			spin_lock_irq(&rfkill_op_lock);
+
+			/*
+			 * handle global ops first -- during unlocked period
+			 * we might have gotten a new global op.
+			 */
+			if (rfkill_op_pending)
+				continue;
+		}
+
+		if (rfkill_is_epo_lock_active())
+			continue;
+
+		for (i = 0; i < NUM_RFKILL_TYPES; i++) {
+			if (__test_and_clear_bit(i, rfkill_sw_pending)) {
+				c = __test_and_clear_bit(i, rfkill_sw_state);
+				spin_unlock_irq(&rfkill_op_lock);
+
+				__rfkill_handle_normal_op(i, c);
+
+				spin_lock_irq(&rfkill_op_lock);
+			}
+		}
+	} while (rfkill_op_pending);
+	spin_unlock_irq(&rfkill_op_lock);
+}
+
+static DECLARE_DELAYED_WORK(rfkill_op_work, rfkill_op_handler);
+static unsigned long rfkill_last_scheduled;
+
+static unsigned long rfkill_ratelimit(const unsigned long last)
+{
+	const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY);
+	return (time_after(jiffies, last + delay)) ? 0 : delay;
+}
+
+static void rfkill_schedule_ratelimited(void)
+{
+	if (delayed_work_pending(&rfkill_op_work))
+		return;
+	schedule_delayed_work(&rfkill_op_work,
+			      rfkill_ratelimit(rfkill_last_scheduled));
+	rfkill_last_scheduled = jiffies;
+}
+
+static void rfkill_schedule_global_op(enum rfkill_sched_op op)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&rfkill_op_lock, flags);
+	rfkill_op = op;
+	rfkill_op_pending = true;
+	if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) {
+		/* bypass the limiter for EPO */
+		cancel_delayed_work(&rfkill_op_work);
+		schedule_delayed_work(&rfkill_op_work, 0);
+		rfkill_last_scheduled = jiffies;
+	} else
+		rfkill_schedule_ratelimited();
+	spin_unlock_irqrestore(&rfkill_op_lock, flags);
+}
+
+static void rfkill_schedule_toggle(enum rfkill_type type)
+{
+	unsigned long flags;
+
+	if (rfkill_is_epo_lock_active())
+		return;
+
+	spin_lock_irqsave(&rfkill_op_lock, flags);
+	if (!rfkill_op_pending) {
+		__set_bit(type, rfkill_sw_pending);
+		__change_bit(type, rfkill_sw_state);
+		rfkill_schedule_ratelimited();
+	}
+	spin_unlock_irqrestore(&rfkill_op_lock, flags);
+}
+
+static void rfkill_schedule_evsw_rfkillall(int state)
+{
+	if (state)
+		rfkill_schedule_global_op(rfkill_master_switch_op);
+	else
+		rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO);
+}
+
+static void rfkill_event(struct input_handle *handle, unsigned int type,
+			unsigned int code, int data)
+{
+	if (type == EV_KEY && data == 1) {
+		switch (code) {
+		case KEY_WLAN:
+			rfkill_schedule_toggle(RFKILL_TYPE_WLAN);
+			break;
+		case KEY_BLUETOOTH:
+			rfkill_schedule_toggle(RFKILL_TYPE_BLUETOOTH);
+			break;
+		case KEY_UWB:
+			rfkill_schedule_toggle(RFKILL_TYPE_UWB);
+			break;
+		case KEY_WIMAX:
+			rfkill_schedule_toggle(RFKILL_TYPE_WIMAX);
+			break;
+		}
+	} else if (type == EV_SW && code == SW_RFKILL_ALL)
+		rfkill_schedule_evsw_rfkillall(data);
+}
+
+static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
+			  const struct input_device_id *id)
+{
+	struct input_handle *handle;
+	int error;
+
+	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
+	if (!handle)
+		return -ENOMEM;
+
+	handle->dev = dev;
+	handle->handler = handler;
+	handle->name = "rfkill";
+
+	/* causes rfkill_start() to be called */
+	error = input_register_handle(handle);
+	if (error)
+		goto err_free_handle;
+
+	error = input_open_device(handle);
+	if (error)
+		goto err_unregister_handle;
+
+	return 0;
+
+ err_unregister_handle:
+	input_unregister_handle(handle);
+ err_free_handle:
+	kfree(handle);
+	return error;
+}
+
+static void rfkill_start(struct input_handle *handle)
+{
+	/*
+	 * Take event_lock to guard against configuration changes, we
+	 * should be able to deal with concurrency with rfkill_event()
+	 * just fine (which event_lock will also avoid).
+	 */
+	spin_lock_irq(&handle->dev->event_lock);
+
+	if (test_bit(EV_SW, handle->dev->evbit) &&
+	    test_bit(SW_RFKILL_ALL, handle->dev->swbit))
+		rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL,
+							handle->dev->sw));
+
+	spin_unlock_irq(&handle->dev->event_lock);
+}
+
+static void rfkill_disconnect(struct input_handle *handle)
+{
+	input_close_device(handle);
+	input_unregister_handle(handle);
+	kfree(handle);
+}
+
+static const struct input_device_id rfkill_ids[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT,
+		.evbit = { BIT(EV_SW) },
+		.swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) },
+	},
+	{ }
+};
+
+static struct input_handler rfkill_handler = {
+	.name =	"rfkill",
+	.event = rfkill_event,
+	.connect = rfkill_connect,
+	.start = rfkill_start,
+	.disconnect = rfkill_disconnect,
+	.id_table = rfkill_ids,
+};
+
+int __init rfkill_handler_init(void)
+{
+	switch (rfkill_master_switch_mode) {
+	case RFKILL_INPUT_MASTER_UNBLOCKALL:
+		rfkill_master_switch_op = RFKILL_GLOBAL_OP_UNBLOCK;
+		break;
+	case RFKILL_INPUT_MASTER_RESTORE:
+		rfkill_master_switch_op = RFKILL_GLOBAL_OP_RESTORE;
+		break;
+	case RFKILL_INPUT_MASTER_UNLOCK:
+		rfkill_master_switch_op = RFKILL_GLOBAL_OP_UNLOCK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_init(&rfkill_op_lock);
+
+	/* Avoid delay at first schedule */
+	rfkill_last_scheduled =
+			jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1;
+	return input_register_handler(&rfkill_handler);
+}
+
+void __exit rfkill_handler_exit(void)
+{
+	input_unregister_handler(&rfkill_handler);
+	cancel_delayed_work_sync(&rfkill_op_work);
+}
diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c
deleted file mode 100644
index 84efde97c5a..00000000000
--- a/net/rfkill/rfkill-input.c
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * Input layer to RF Kill interface connector
- *
- * Copyright (c) 2007 Dmitry Torokhov
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/init.h>
-#include <linux/rfkill.h>
-#include <linux/sched.h>
-
-#include "rfkill-input.h"
-
-MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
-MODULE_DESCRIPTION("Input layer to RF switch connector");
-MODULE_LICENSE("GPL");
-
-enum rfkill_input_master_mode {
-	RFKILL_INPUT_MASTER_DONOTHING = 0,
-	RFKILL_INPUT_MASTER_RESTORE = 1,
-	RFKILL_INPUT_MASTER_UNBLOCKALL = 2,
-	RFKILL_INPUT_MASTER_MAX,	/* marker */
-};
-
-/* Delay (in ms) between consecutive switch ops */
-#define RFKILL_OPS_DELAY 200
-
-static enum rfkill_input_master_mode rfkill_master_switch_mode =
-					RFKILL_INPUT_MASTER_UNBLOCKALL;
-module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0);
-MODULE_PARM_DESC(master_switch_mode,
-	"SW_RFKILL_ALL ON should: 0=do nothing; 1=restore; 2=unblock all");
-
-enum rfkill_global_sched_op {
-	RFKILL_GLOBAL_OP_EPO = 0,
-	RFKILL_GLOBAL_OP_RESTORE,
-	RFKILL_GLOBAL_OP_UNLOCK,
-	RFKILL_GLOBAL_OP_UNBLOCK,
-};
-
-/*
- * Currently, the code marked with RFKILL_NEED_SWSET is inactive.
- * If handling of EV_SW SW_WLAN/WWAN/BLUETOOTH/etc is needed in the
- * future, when such events are added, that code will be necessary.
- */
-
-struct rfkill_task {
-	struct delayed_work dwork;
-
-	/* ensures that task is serialized */
-	struct mutex mutex;
-
-	/* protects everything below */
-	spinlock_t lock;
-
-	/* pending regular switch operations (1=pending) */
-	unsigned long sw_pending[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-
-#ifdef RFKILL_NEED_SWSET
-	/* set operation pending (1=pending) */
-	unsigned long sw_setpending[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-
-	/* desired state for pending set operation (1=unblock) */
-	unsigned long sw_newstate[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-#endif
-
-	/* should the state be complemented (1=yes) */
-	unsigned long sw_togglestate[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-
-	bool global_op_pending;
-	enum rfkill_global_sched_op op;
-
-	/* last time it was scheduled */
-	unsigned long last_scheduled;
-};
-
-static void __rfkill_handle_global_op(enum rfkill_global_sched_op op)
-{
-	unsigned int i;
-
-	switch (op) {
-	case RFKILL_GLOBAL_OP_EPO:
-		rfkill_epo();
-		break;
-	case RFKILL_GLOBAL_OP_RESTORE:
-		rfkill_restore_states();
-		break;
-	case RFKILL_GLOBAL_OP_UNLOCK:
-		rfkill_remove_epo_lock();
-		break;
-	case RFKILL_GLOBAL_OP_UNBLOCK:
-		rfkill_remove_epo_lock();
-		for (i = 0; i < RFKILL_TYPE_MAX; i++)
-			rfkill_switch_all(i, RFKILL_STATE_UNBLOCKED);
-		break;
-	default:
-		/* memory corruption or bug, fail safely */
-		rfkill_epo();
-		WARN(1, "Unknown requested operation %d! "
-			"rfkill Emergency Power Off activated\n",
-			op);
-	}
-}
-
-#ifdef RFKILL_NEED_SWSET
-static void __rfkill_handle_normal_op(const enum rfkill_type type,
-			const bool sp, const bool s, const bool c)
-{
-	enum rfkill_state state;
-
-	if (sp)
-		state = (s) ? RFKILL_STATE_UNBLOCKED :
-			      RFKILL_STATE_SOFT_BLOCKED;
-	else
-		state = rfkill_get_global_state(type);
-
-	if (c)
-		state = rfkill_state_complement(state);
-
-	rfkill_switch_all(type, state);
-}
-#else
-static void __rfkill_handle_normal_op(const enum rfkill_type type,
-			const bool c)
-{
-	enum rfkill_state state;
-
-	state = rfkill_get_global_state(type);
-	if (c)
-		state = rfkill_state_complement(state);
-
-	rfkill_switch_all(type, state);
-}
-#endif
-
-static void rfkill_task_handler(struct work_struct *work)
-{
-	struct rfkill_task *task = container_of(work,
-					struct rfkill_task, dwork.work);
-	bool doit = true;
-
-	mutex_lock(&task->mutex);
-
-	spin_lock_irq(&task->lock);
-	while (doit) {
-		if (task->global_op_pending) {
-			enum rfkill_global_sched_op op = task->op;
-			task->global_op_pending = false;
-			memset(task->sw_pending, 0, sizeof(task->sw_pending));
-			spin_unlock_irq(&task->lock);
-
-			__rfkill_handle_global_op(op);
-
-			/* make sure we do at least one pass with
-			 * !task->global_op_pending */
-			spin_lock_irq(&task->lock);
-			continue;
-		} else if (!rfkill_is_epo_lock_active()) {
-			unsigned int i = 0;
-
-			while (!task->global_op_pending &&
-						i < RFKILL_TYPE_MAX) {
-				if (test_and_clear_bit(i, task->sw_pending)) {
-					bool c;
-#ifdef RFKILL_NEED_SWSET
-					bool sp, s;
-					sp = test_and_clear_bit(i,
-							task->sw_setpending);
-					s = test_bit(i, task->sw_newstate);
-#endif
-					c = test_and_clear_bit(i,
-							task->sw_togglestate);
-					spin_unlock_irq(&task->lock);
-
-#ifdef RFKILL_NEED_SWSET
-					__rfkill_handle_normal_op(i, sp, s, c);
-#else
-					__rfkill_handle_normal_op(i, c);
-#endif
-
-					spin_lock_irq(&task->lock);
-				}
-				i++;
-			}
-		}
-		doit = task->global_op_pending;
-	}
-	spin_unlock_irq(&task->lock);
-
-	mutex_unlock(&task->mutex);
-}
-
-static struct rfkill_task rfkill_task = {
-	.dwork = __DELAYED_WORK_INITIALIZER(rfkill_task.dwork,
-				rfkill_task_handler),
-	.mutex = __MUTEX_INITIALIZER(rfkill_task.mutex),
-	.lock = __SPIN_LOCK_UNLOCKED(rfkill_task.lock),
-};
-
-static unsigned long rfkill_ratelimit(const unsigned long last)
-{
-	const unsigned long delay = msecs_to_jiffies(RFKILL_OPS_DELAY);
-	return (time_after(jiffies, last + delay)) ? 0 : delay;
-}
-
-static void rfkill_schedule_ratelimited(void)
-{
-	if (!delayed_work_pending(&rfkill_task.dwork)) {
-		schedule_delayed_work(&rfkill_task.dwork,
-				rfkill_ratelimit(rfkill_task.last_scheduled));
-		rfkill_task.last_scheduled = jiffies;
-	}
-}
-
-static void rfkill_schedule_global_op(enum rfkill_global_sched_op op)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&rfkill_task.lock, flags);
-	rfkill_task.op = op;
-	rfkill_task.global_op_pending = true;
-	if (op == RFKILL_GLOBAL_OP_EPO && !rfkill_is_epo_lock_active()) {
-		/* bypass the limiter for EPO */
-		cancel_delayed_work(&rfkill_task.dwork);
-		schedule_delayed_work(&rfkill_task.dwork, 0);
-		rfkill_task.last_scheduled = jiffies;
-	} else
-		rfkill_schedule_ratelimited();
-	spin_unlock_irqrestore(&rfkill_task.lock, flags);
-}
-
-#ifdef RFKILL_NEED_SWSET
-/* Use this if you need to add EV_SW SW_WLAN/WWAN/BLUETOOTH/etc handling */
-
-static void rfkill_schedule_set(enum rfkill_type type,
-				enum rfkill_state desired_state)
-{
-	unsigned long flags;
-
-	if (rfkill_is_epo_lock_active())
-		return;
-
-	spin_lock_irqsave(&rfkill_task.lock, flags);
-	if (!rfkill_task.global_op_pending) {
-		set_bit(type, rfkill_task.sw_pending);
-		set_bit(type, rfkill_task.sw_setpending);
-		clear_bit(type, rfkill_task.sw_togglestate);
-		if (desired_state)
-			set_bit(type,  rfkill_task.sw_newstate);
-		else
-			clear_bit(type, rfkill_task.sw_newstate);
-		rfkill_schedule_ratelimited();
-	}
-	spin_unlock_irqrestore(&rfkill_task.lock, flags);
-}
-#endif
-
-static void rfkill_schedule_toggle(enum rfkill_type type)
-{
-	unsigned long flags;
-
-	if (rfkill_is_epo_lock_active())
-		return;
-
-	spin_lock_irqsave(&rfkill_task.lock, flags);
-	if (!rfkill_task.global_op_pending) {
-		set_bit(type, rfkill_task.sw_pending);
-		change_bit(type, rfkill_task.sw_togglestate);
-		rfkill_schedule_ratelimited();
-	}
-	spin_unlock_irqrestore(&rfkill_task.lock, flags);
-}
-
-static void rfkill_schedule_evsw_rfkillall(int state)
-{
-	if (state) {
-		switch (rfkill_master_switch_mode) {
-		case RFKILL_INPUT_MASTER_UNBLOCKALL:
-			rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNBLOCK);
-			break;
-		case RFKILL_INPUT_MASTER_RESTORE:
-			rfkill_schedule_global_op(RFKILL_GLOBAL_OP_RESTORE);
-			break;
-		case RFKILL_INPUT_MASTER_DONOTHING:
-			rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNLOCK);
-			break;
-		default:
-			/* memory corruption or driver bug! fail safely */
-			rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO);
-			WARN(1, "Unknown rfkill_master_switch_mode (%d), "
-				"driver bug or memory corruption detected!\n",
-				rfkill_master_switch_mode);
-			break;
-		}
-	} else
-		rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO);
-}
-
-static void rfkill_event(struct input_handle *handle, unsigned int type,
-			unsigned int code, int data)
-{
-	if (type == EV_KEY && data == 1) {
-		enum rfkill_type t;
-
-		switch (code) {
-		case KEY_WLAN:
-			t = RFKILL_TYPE_WLAN;
-			break;
-		case KEY_BLUETOOTH:
-			t = RFKILL_TYPE_BLUETOOTH;
-			break;
-		case KEY_UWB:
-			t = RFKILL_TYPE_UWB;
-			break;
-		case KEY_WIMAX:
-			t = RFKILL_TYPE_WIMAX;
-			break;
-		default:
-			return;
-		}
-		rfkill_schedule_toggle(t);
-		return;
-	} else if (type == EV_SW) {
-		switch (code) {
-		case SW_RFKILL_ALL:
-			rfkill_schedule_evsw_rfkillall(data);
-			return;
-		default:
-			return;
-		}
-	}
-}
-
-static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
-			  const struct input_device_id *id)
-{
-	struct input_handle *handle;
-	int error;
-
-	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
-	if (!handle)
-		return -ENOMEM;
-
-	handle->dev = dev;
-	handle->handler = handler;
-	handle->name = "rfkill";
-
-	/* causes rfkill_start() to be called */
-	error = input_register_handle(handle);
-	if (error)
-		goto err_free_handle;
-
-	error = input_open_device(handle);
-	if (error)
-		goto err_unregister_handle;
-
-	return 0;
-
- err_unregister_handle:
-	input_unregister_handle(handle);
- err_free_handle:
-	kfree(handle);
-	return error;
-}
-
-static void rfkill_start(struct input_handle *handle)
-{
-	/* Take event_lock to guard against configuration changes, we
-	 * should be able to deal with concurrency with rfkill_event()
-	 * just fine (which event_lock will also avoid). */
-	spin_lock_irq(&handle->dev->event_lock);
-
-	if (test_bit(EV_SW, handle->dev->evbit)) {
-		if (test_bit(SW_RFKILL_ALL, handle->dev->swbit))
-			rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL,
-							handle->dev->sw));
-		/* add resync for further EV_SW events here */
-	}
-
-	spin_unlock_irq(&handle->dev->event_lock);
-}
-
-static void rfkill_disconnect(struct input_handle *handle)
-{
-	input_close_device(handle);
-	input_unregister_handle(handle);
-	kfree(handle);
-}
-
-static const struct input_device_id rfkill_ids[] = {
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(KEY_WLAN)] = BIT_MASK(KEY_WLAN) },
-	},
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(KEY_BLUETOOTH)] = BIT_MASK(KEY_BLUETOOTH) },
-	},
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(KEY_UWB)] = BIT_MASK(KEY_UWB) },
-	},
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(KEY_WIMAX)] = BIT_MASK(KEY_WIMAX) },
-	},
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_SWBIT,
-		.evbit = { BIT(EV_SW) },
-		.swbit = { [BIT_WORD(SW_RFKILL_ALL)] = BIT_MASK(SW_RFKILL_ALL) },
-	},
-	{ }
-};
-
-static struct input_handler rfkill_handler = {
-	.event =	rfkill_event,
-	.connect =	rfkill_connect,
-	.disconnect =	rfkill_disconnect,
-	.start =	rfkill_start,
-	.name =		"rfkill",
-	.id_table =	rfkill_ids,
-};
-
-static int __init rfkill_handler_init(void)
-{
-	if (rfkill_master_switch_mode >= RFKILL_INPUT_MASTER_MAX)
-		return -EINVAL;
-
-	/*
-	 * The penalty to not doing this is a possible RFKILL_OPS_DELAY delay
-	 * at the first use.  Acceptable, but if we can avoid it, why not?
-	 */
-	rfkill_task.last_scheduled =
-			jiffies - msecs_to_jiffies(RFKILL_OPS_DELAY) - 1;
-	return input_register_handler(&rfkill_handler);
-}
-
-static void __exit rfkill_handler_exit(void)
-{
-	input_unregister_handler(&rfkill_handler);
-	cancel_delayed_work_sync(&rfkill_task.dwork);
-	rfkill_remove_epo_lock();
-}
-
-module_init(rfkill_handler_init);
-module_exit(rfkill_handler_exit);
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
deleted file mode 100644
index 3eaa39403c1..00000000000
--- a/net/rfkill/rfkill.c
+++ /dev/null
@@ -1,882 +0,0 @@
-/*
- * Copyright (C) 2006 - 2007 Ivo van Doorn
- * Copyright (C) 2007 Dmitry Torokhov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/capability.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/rfkill.h>
-
-/* Get declaration of rfkill_switch_all() to shut up sparse. */
-#include "rfkill-input.h"
-
-
-MODULE_AUTHOR("Ivo van Doorn <IvDoorn@gmail.com>");
-MODULE_VERSION("1.0");
-MODULE_DESCRIPTION("RF switch support");
-MODULE_LICENSE("GPL");
-
-static LIST_HEAD(rfkill_list);	/* list of registered rf switches */
-static DEFINE_MUTEX(rfkill_global_mutex);
-
-static unsigned int rfkill_default_state = RFKILL_STATE_UNBLOCKED;
-module_param_named(default_state, rfkill_default_state, uint, 0444);
-MODULE_PARM_DESC(default_state,
-		 "Default initial state for all radio types, 0 = radio off");
-
-struct rfkill_gsw_state {
-	enum rfkill_state current_state;
-	enum rfkill_state default_state;
-};
-
-static struct rfkill_gsw_state rfkill_global_states[RFKILL_TYPE_MAX];
-static unsigned long rfkill_states_lockdflt[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-static bool rfkill_epo_lock_active;
-
-
-#ifdef CONFIG_RFKILL_LEDS
-static void rfkill_led_trigger(struct rfkill *rfkill,
-			       enum rfkill_state state)
-{
-	struct led_trigger *led = &rfkill->led_trigger;
-
-	if (!led->name)
-		return;
-	if (state != RFKILL_STATE_UNBLOCKED)
-		led_trigger_event(led, LED_OFF);
-	else
-		led_trigger_event(led, LED_FULL);
-}
-
-static void rfkill_led_trigger_activate(struct led_classdev *led)
-{
-	struct rfkill *rfkill = container_of(led->trigger,
-			struct rfkill, led_trigger);
-
-	rfkill_led_trigger(rfkill, rfkill->state);
-}
-#endif /* CONFIG_RFKILL_LEDS */
-
-static void rfkill_uevent(struct rfkill *rfkill)
-{
-	kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE);
-}
-
-static void update_rfkill_state(struct rfkill *rfkill)
-{
-	enum rfkill_state newstate, oldstate;
-
-	if (rfkill->get_state) {
-		mutex_lock(&rfkill->mutex);
-		if (!rfkill->get_state(rfkill->data, &newstate)) {
-			oldstate = rfkill->state;
-			rfkill->state = newstate;
-			if (oldstate != newstate)
-				rfkill_uevent(rfkill);
-		}
-		mutex_unlock(&rfkill->mutex);
-	}
-}
-
-/**
- * rfkill_toggle_radio - wrapper for toggle_radio hook
- * @rfkill: the rfkill struct to use
- * @force: calls toggle_radio even if cache says it is not needed,
- *	and also makes sure notifications of the state will be
- *	sent even if it didn't change
- * @state: the new state to call toggle_radio() with
- *
- * Calls rfkill->toggle_radio, enforcing the API for toggle_radio
- * calls and handling all the red tape such as issuing notifications
- * if the call is successful.
- *
- * Suspended devices are not touched at all, and -EAGAIN is returned.
- *
- * Note that the @force parameter cannot override a (possibly cached)
- * state of RFKILL_STATE_HARD_BLOCKED.  Any device making use of
- * RFKILL_STATE_HARD_BLOCKED implements either get_state() or
- * rfkill_force_state(), so the cache either is bypassed or valid.
- *
- * Note that we do call toggle_radio for RFKILL_STATE_SOFT_BLOCKED
- * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to
- * give the driver a hint that it should double-BLOCK the transmitter.
- *
- * Caller must have acquired rfkill->mutex.
- */
-static int rfkill_toggle_radio(struct rfkill *rfkill,
-				enum rfkill_state state,
-				int force)
-{
-	int retval = 0;
-	enum rfkill_state oldstate, newstate;
-
-	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
-		return -EBUSY;
-
-	oldstate = rfkill->state;
-
-	if (rfkill->get_state && !force &&
-	    !rfkill->get_state(rfkill->data, &newstate))
-		rfkill->state = newstate;
-
-	switch (state) {
-	case RFKILL_STATE_HARD_BLOCKED:
-		/* typically happens when refreshing hardware state,
-		 * such as on resume */
-		state = RFKILL_STATE_SOFT_BLOCKED;
-		break;
-	case RFKILL_STATE_UNBLOCKED:
-		/* force can't override this, only rfkill_force_state() can */
-		if (rfkill->state == RFKILL_STATE_HARD_BLOCKED)
-			return -EPERM;
-		break;
-	case RFKILL_STATE_SOFT_BLOCKED:
-		/* nothing to do, we want to give drivers the hint to double
-		 * BLOCK even a transmitter that is already in state
-		 * RFKILL_STATE_HARD_BLOCKED */
-		break;
-	default:
-		WARN(1, KERN_WARNING
-			"rfkill: illegal state %d passed as parameter "
-			"to rfkill_toggle_radio\n", state);
-		return -EINVAL;
-	}
-
-	if (force || state != rfkill->state) {
-		retval = rfkill->toggle_radio(rfkill->data, state);
-		/* never allow a HARD->SOFT downgrade! */
-		if (!retval && rfkill->state != RFKILL_STATE_HARD_BLOCKED)
-			rfkill->state = state;
-	}
-
-	if (force || rfkill->state != oldstate)
-		rfkill_uevent(rfkill);
-
-	return retval;
-}
-
-/**
- * __rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affected
- * @state: the new state
- *
- * This function toggles the state of all switches of given type,
- * unless a specific switch is claimed by userspace (in which case,
- * that switch is left alone) or suspended.
- *
- * Caller must have acquired rfkill_global_mutex.
- */
-static void __rfkill_switch_all(const enum rfkill_type type,
-				const enum rfkill_state state)
-{
-	struct rfkill *rfkill;
-
-	if (WARN((state >= RFKILL_STATE_MAX || type >= RFKILL_TYPE_MAX),
-			KERN_WARNING
-			"rfkill: illegal state %d or type %d "
-			"passed as parameter to __rfkill_switch_all\n",
-			state, type))
-		return;
-
-	rfkill_global_states[type].current_state = state;
-	list_for_each_entry(rfkill, &rfkill_list, node) {
-		if ((!rfkill->user_claim) && (rfkill->type == type)) {
-			mutex_lock(&rfkill->mutex);
-			rfkill_toggle_radio(rfkill, state, 0);
-			mutex_unlock(&rfkill->mutex);
-		}
-	}
-}
-
-/**
- * rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affected
- * @state: the new state
- *
- * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state).
- * Please refer to __rfkill_switch_all() for details.
- *
- * Does nothing if the EPO lock is active.
- */
-void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
-{
-	mutex_lock(&rfkill_global_mutex);
-	if (!rfkill_epo_lock_active)
-		__rfkill_switch_all(type, state);
-	mutex_unlock(&rfkill_global_mutex);
-}
-EXPORT_SYMBOL(rfkill_switch_all);
-
-/**
- * rfkill_epo - emergency power off all transmitters
- *
- * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
- * ignoring everything in its path but rfkill_global_mutex and rfkill->mutex.
- *
- * The global state before the EPO is saved and can be restored later
- * using rfkill_restore_states().
- */
-void rfkill_epo(void)
-{
-	struct rfkill *rfkill;
-	int i;
-
-	mutex_lock(&rfkill_global_mutex);
-
-	rfkill_epo_lock_active = true;
-	list_for_each_entry(rfkill, &rfkill_list, node) {
-		mutex_lock(&rfkill->mutex);
-		rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
-		mutex_unlock(&rfkill->mutex);
-	}
-	for (i = 0; i < RFKILL_TYPE_MAX; i++) {
-		rfkill_global_states[i].default_state =
-				rfkill_global_states[i].current_state;
-		rfkill_global_states[i].current_state =
-				RFKILL_STATE_SOFT_BLOCKED;
-	}
-	mutex_unlock(&rfkill_global_mutex);
-}
-EXPORT_SYMBOL_GPL(rfkill_epo);
-
-/**
- * rfkill_restore_states - restore global states
- *
- * Restore (and sync switches to) the global state from the
- * states in rfkill_default_states.  This can undo the effects of
- * a call to rfkill_epo().
- */
-void rfkill_restore_states(void)
-{
-	int i;
-
-	mutex_lock(&rfkill_global_mutex);
-
-	rfkill_epo_lock_active = false;
-	for (i = 0; i < RFKILL_TYPE_MAX; i++)
-		__rfkill_switch_all(i, rfkill_global_states[i].default_state);
-	mutex_unlock(&rfkill_global_mutex);
-}
-EXPORT_SYMBOL_GPL(rfkill_restore_states);
-
-/**
- * rfkill_remove_epo_lock - unlock state changes
- *
- * Used by rfkill-input manually unlock state changes, when
- * the EPO switch is deactivated.
- */
-void rfkill_remove_epo_lock(void)
-{
-	mutex_lock(&rfkill_global_mutex);
-	rfkill_epo_lock_active = false;
-	mutex_unlock(&rfkill_global_mutex);
-}
-EXPORT_SYMBOL_GPL(rfkill_remove_epo_lock);
-
-/**
- * rfkill_is_epo_lock_active - returns true EPO is active
- *
- * Returns 0 (false) if there is NOT an active EPO contidion,
- * and 1 (true) if there is an active EPO contition, which
- * locks all radios in one of the BLOCKED states.
- *
- * Can be called in atomic context.
- */
-bool rfkill_is_epo_lock_active(void)
-{
-	return rfkill_epo_lock_active;
-}
-EXPORT_SYMBOL_GPL(rfkill_is_epo_lock_active);
-
-/**
- * rfkill_get_global_state - returns global state for a type
- * @type: the type to get the global state of
- *
- * Returns the current global state for a given wireless
- * device type.
- */
-enum rfkill_state rfkill_get_global_state(const enum rfkill_type type)
-{
-	return rfkill_global_states[type].current_state;
-}
-EXPORT_SYMBOL_GPL(rfkill_get_global_state);
-
-/**
- * rfkill_force_state - Force the internal rfkill radio state
- * @rfkill: pointer to the rfkill class to modify.
- * @state: the current radio state the class should be forced to.
- *
- * This function updates the internal state of the radio cached
- * by the rfkill class.  It should be used when the driver gets
- * a notification by the firmware/hardware of the current *real*
- * state of the radio rfkill switch.
- *
- * Devices which are subject to external changes on their rfkill
- * state (such as those caused by a hardware rfkill line) MUST
- * have their driver arrange to call rfkill_force_state() as soon
- * as possible after such a change.
- *
- * This function may not be called from an atomic context.
- */
-int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state)
-{
-	enum rfkill_state oldstate;
-
-	BUG_ON(!rfkill);
-	if (WARN((state >= RFKILL_STATE_MAX),
-			KERN_WARNING
-			"rfkill: illegal state %d passed as parameter "
-			"to rfkill_force_state\n", state))
-		return -EINVAL;
-
-	mutex_lock(&rfkill->mutex);
-
-	oldstate = rfkill->state;
-	rfkill->state = state;
-
-	if (state != oldstate)
-		rfkill_uevent(rfkill);
-
-	mutex_unlock(&rfkill->mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(rfkill_force_state);
-
-static ssize_t rfkill_name_show(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	return sprintf(buf, "%s\n", rfkill->name);
-}
-
-static const char *rfkill_get_type_str(enum rfkill_type type)
-{
-	switch (type) {
-	case RFKILL_TYPE_WLAN:
-		return "wlan";
-	case RFKILL_TYPE_BLUETOOTH:
-		return "bluetooth";
-	case RFKILL_TYPE_UWB:
-		return "ultrawideband";
-	case RFKILL_TYPE_WIMAX:
-		return "wimax";
-	case RFKILL_TYPE_WWAN:
-		return "wwan";
-	default:
-		BUG();
-	}
-}
-
-static ssize_t rfkill_type_show(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	return sprintf(buf, "%s\n", rfkill_get_type_str(rfkill->type));
-}
-
-static ssize_t rfkill_state_show(struct device *dev,
-				 struct device_attribute *attr,
-				 char *buf)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	update_rfkill_state(rfkill);
-	return sprintf(buf, "%d\n", rfkill->state);
-}
-
-static ssize_t rfkill_state_store(struct device *dev,
-				  struct device_attribute *attr,
-				  const char *buf, size_t count)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-	unsigned long state;
-	int error;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	error = strict_strtoul(buf, 0, &state);
-	if (error)
-		return error;
-
-	/* RFKILL_STATE_HARD_BLOCKED is illegal here... */
-	if (state != RFKILL_STATE_UNBLOCKED &&
-	    state != RFKILL_STATE_SOFT_BLOCKED)
-		return -EINVAL;
-
-	error = mutex_lock_killable(&rfkill->mutex);
-	if (error)
-		return error;
-
-	if (!rfkill_epo_lock_active)
-		error = rfkill_toggle_radio(rfkill, state, 0);
-	else
-		error = -EPERM;
-
-	mutex_unlock(&rfkill->mutex);
-
-	return error ? error : count;
-}
-
-static ssize_t rfkill_claim_show(struct device *dev,
-				 struct device_attribute *attr,
-				 char *buf)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	return sprintf(buf, "%d\n", rfkill->user_claim);
-}
-
-static ssize_t rfkill_claim_store(struct device *dev,
-				  struct device_attribute *attr,
-				  const char *buf, size_t count)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-	unsigned long claim_tmp;
-	bool claim;
-	int error;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (rfkill->user_claim_unsupported)
-		return -EOPNOTSUPP;
-
-	error = strict_strtoul(buf, 0, &claim_tmp);
-	if (error)
-		return error;
-	claim = !!claim_tmp;
-
-	/*
-	 * Take the global lock to make sure the kernel is not in
-	 * the middle of rfkill_switch_all
-	 */
-	error = mutex_lock_killable(&rfkill_global_mutex);
-	if (error)
-		return error;
-
-	if (rfkill->user_claim != claim) {
-		if (!claim && !rfkill_epo_lock_active) {
-			mutex_lock(&rfkill->mutex);
-			rfkill_toggle_radio(rfkill,
-					rfkill_global_states[rfkill->type].current_state,
-					0);
-			mutex_unlock(&rfkill->mutex);
-		}
-		rfkill->user_claim = claim;
-	}
-
-	mutex_unlock(&rfkill_global_mutex);
-
-	return error ? error : count;
-}
-
-static struct device_attribute rfkill_dev_attrs[] = {
-	__ATTR(name, S_IRUGO, rfkill_name_show, NULL),
-	__ATTR(type, S_IRUGO, rfkill_type_show, NULL),
-	__ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store),
-	__ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store),
-	__ATTR_NULL
-};
-
-static void rfkill_release(struct device *dev)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	kfree(rfkill);
-	module_put(THIS_MODULE);
-}
-
-#ifdef CONFIG_PM
-static int rfkill_suspend(struct device *dev, pm_message_t state)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-
-	/* mark class device as suspended */
-	if (dev->power.power_state.event != state.event)
-		dev->power.power_state = state;
-
-	/* store state for the resume handler */
-	rfkill->state_for_resume = rfkill->state;
-
-	return 0;
-}
-
-static int rfkill_resume(struct device *dev)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-	enum rfkill_state newstate;
-
-	if (dev->power.power_state.event != PM_EVENT_ON) {
-		mutex_lock(&rfkill->mutex);
-
-		dev->power.power_state.event = PM_EVENT_ON;
-
-		/*
-		 * rfkill->state could have been modified before we got
-		 * called, and won't be updated by rfkill_toggle_radio()
-		 * in force mode.  Sync it FIRST.
-		 */
-		if (rfkill->get_state &&
-		    !rfkill->get_state(rfkill->data, &newstate))
-			rfkill->state = newstate;
-
-		/*
-		 * If we are under EPO, kick transmitter offline,
-		 * otherwise restore to pre-suspend state.
-		 *
-		 * Issue a notification in any case
-		 */
-		rfkill_toggle_radio(rfkill,
-				rfkill_epo_lock_active ?
-					RFKILL_STATE_SOFT_BLOCKED :
-					rfkill->state_for_resume,
-				1);
-
-		mutex_unlock(&rfkill->mutex);
-	}
-
-	return 0;
-}
-#else
-#define rfkill_suspend NULL
-#define rfkill_resume NULL
-#endif
-
-static int rfkill_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct rfkill *rfkill = to_rfkill(dev);
-	int error;
-
-	error = add_uevent_var(env, "RFKILL_NAME=%s", rfkill->name);
-	if (error)
-		return error;
-	error = add_uevent_var(env, "RFKILL_TYPE=%s",
-				rfkill_get_type_str(rfkill->type));
-	if (error)
-		return error;
-	error = add_uevent_var(env, "RFKILL_STATE=%d", rfkill->state);
-	return error;
-}
-
-static struct class rfkill_class = {
-	.name		= "rfkill",
-	.dev_release	= rfkill_release,
-	.dev_attrs	= rfkill_dev_attrs,
-	.suspend	= rfkill_suspend,
-	.resume		= rfkill_resume,
-	.dev_uevent	= rfkill_dev_uevent,
-};
-
-static int rfkill_check_duplicity(const struct rfkill *rfkill)
-{
-	struct rfkill *p;
-	unsigned long seen[BITS_TO_LONGS(RFKILL_TYPE_MAX)];
-
-	memset(seen, 0, sizeof(seen));
-
-	list_for_each_entry(p, &rfkill_list, node) {
-		if (WARN((p == rfkill), KERN_WARNING
-				"rfkill: illegal attempt to register "
-				"an already registered rfkill struct\n"))
-			return -EEXIST;
-		set_bit(p->type, seen);
-	}
-
-	/* 0: first switch of its kind */
-	return (test_bit(rfkill->type, seen)) ? 1 : 0;
-}
-
-static int rfkill_add_switch(struct rfkill *rfkill)
-{
-	int error;
-
-	mutex_lock(&rfkill_global_mutex);
-
-	error = rfkill_check_duplicity(rfkill);
-	if (error < 0)
-		goto unlock_out;
-
-	if (!error) {
-		/* lock default after first use */
-		set_bit(rfkill->type, rfkill_states_lockdflt);
-		rfkill_global_states[rfkill->type].current_state =
-			rfkill_global_states[rfkill->type].default_state;
-	}
-
-	rfkill_toggle_radio(rfkill,
-			    rfkill_global_states[rfkill->type].current_state,
-			    0);
-
-	list_add_tail(&rfkill->node, &rfkill_list);
-
-	error = 0;
-unlock_out:
-	mutex_unlock(&rfkill_global_mutex);
-
-	return error;
-}
-
-static void rfkill_remove_switch(struct rfkill *rfkill)
-{
-	mutex_lock(&rfkill_global_mutex);
-	list_del_init(&rfkill->node);
-	mutex_unlock(&rfkill_global_mutex);
-
-	mutex_lock(&rfkill->mutex);
-	rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
-	mutex_unlock(&rfkill->mutex);
-}
-
-/**
- * rfkill_allocate - allocate memory for rfkill structure.
- * @parent: device that has rf switch on it
- * @type: type of the switch (RFKILL_TYPE_*)
- *
- * This function should be called by the network driver when it needs
- * rfkill structure.  Once the structure is allocated the driver should
- * finish its initialization by setting the name, private data, enable_radio
- * and disable_radio methods and then register it with rfkill_register().
- *
- * NOTE: If registration fails the structure shoudl be freed by calling
- * rfkill_free() otherwise rfkill_unregister() should be used.
- */
-struct rfkill * __must_check rfkill_allocate(struct device *parent,
-					     enum rfkill_type type)
-{
-	struct rfkill *rfkill;
-	struct device *dev;
-
-	if (WARN((type >= RFKILL_TYPE_MAX),
-			KERN_WARNING
-			"rfkill: illegal type %d passed as parameter "
-			"to rfkill_allocate\n", type))
-		return NULL;
-
-	rfkill = kzalloc(sizeof(struct rfkill), GFP_KERNEL);
-	if (!rfkill)
-		return NULL;
-
-	mutex_init(&rfkill->mutex);
-	INIT_LIST_HEAD(&rfkill->node);
-	rfkill->type = type;
-
-	dev = &rfkill->dev;
-	dev->class = &rfkill_class;
-	dev->parent = parent;
-	device_initialize(dev);
-
-	__module_get(THIS_MODULE);
-
-	return rfkill;
-}
-EXPORT_SYMBOL(rfkill_allocate);
-
-/**
- * rfkill_free - Mark rfkill structure for deletion
- * @rfkill: rfkill structure to be destroyed
- *
- * Decrements reference count of the rfkill structure so it is destroyed.
- * Note that rfkill_free() should _not_ be called after rfkill_unregister().
- */
-void rfkill_free(struct rfkill *rfkill)
-{
-	if (rfkill)
-		put_device(&rfkill->dev);
-}
-EXPORT_SYMBOL(rfkill_free);
-
-static void rfkill_led_trigger_register(struct rfkill *rfkill)
-{
-#ifdef CONFIG_RFKILL_LEDS
-	int error;
-
-	if (!rfkill->led_trigger.name)
-		rfkill->led_trigger.name = dev_name(&rfkill->dev);
-	if (!rfkill->led_trigger.activate)
-		rfkill->led_trigger.activate = rfkill_led_trigger_activate;
-	error = led_trigger_register(&rfkill->led_trigger);
-	if (error)
-		rfkill->led_trigger.name = NULL;
-#endif /* CONFIG_RFKILL_LEDS */
-}
-
-static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
-{
-#ifdef CONFIG_RFKILL_LEDS
-	if (rfkill->led_trigger.name) {
-		led_trigger_unregister(&rfkill->led_trigger);
-		rfkill->led_trigger.name = NULL;
-	}
-#endif
-}
-
-/**
- * rfkill_register - Register a rfkill structure.
- * @rfkill: rfkill structure to be registered
- *
- * This function should be called by the network driver when the rfkill
- * structure needs to be registered. Immediately from registration the
- * switch driver should be able to service calls to toggle_radio.
- */
-int __must_check rfkill_register(struct rfkill *rfkill)
-{
-	static atomic_t rfkill_no = ATOMIC_INIT(0);
-	struct device *dev = &rfkill->dev;
-	int error;
-
-	if (WARN((!rfkill || !rfkill->toggle_radio ||
-			rfkill->type >= RFKILL_TYPE_MAX ||
-			rfkill->state >= RFKILL_STATE_MAX),
-			KERN_WARNING
-			"rfkill: attempt to register a "
-			"badly initialized rfkill struct\n"))
-		return -EINVAL;
-
-	dev_set_name(dev, "rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1);
-
-	rfkill_led_trigger_register(rfkill);
-
-	error = rfkill_add_switch(rfkill);
-	if (error) {
-		rfkill_led_trigger_unregister(rfkill);
-		return error;
-	}
-
-	error = device_add(dev);
-	if (error) {
-		rfkill_remove_switch(rfkill);
-		rfkill_led_trigger_unregister(rfkill);
-		return error;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(rfkill_register);
-
-/**
- * rfkill_unregister - Unregister a rfkill structure.
- * @rfkill: rfkill structure to be unregistered
- *
- * This function should be called by the network driver during device
- * teardown to destroy rfkill structure. Note that rfkill_free() should
- * _not_ be called after rfkill_unregister().
- */
-void rfkill_unregister(struct rfkill *rfkill)
-{
-	BUG_ON(!rfkill);
-	device_del(&rfkill->dev);
-	rfkill_remove_switch(rfkill);
-	rfkill_led_trigger_unregister(rfkill);
-	put_device(&rfkill->dev);
-}
-EXPORT_SYMBOL(rfkill_unregister);
-
-/**
- * rfkill_set_default - set initial value for a switch type
- * @type - the type of switch to set the default state of
- * @state - the new default state for that group of switches
- *
- * Sets the initial state rfkill should use for a given type.
- * The following initial states are allowed: RFKILL_STATE_SOFT_BLOCKED
- * and RFKILL_STATE_UNBLOCKED.
- *
- * This function is meant to be used by platform drivers for platforms
- * that can save switch state across power down/reboot.
- *
- * The default state for each switch type can be changed exactly once.
- * After a switch of that type is registered, the default state cannot
- * be changed anymore.  This guards against multiple drivers it the
- * same platform trying to set the initial switch default state, which
- * is not allowed.
- *
- * Returns -EPERM if the state has already been set once or is in use,
- * so drivers likely want to either ignore or at most printk(KERN_NOTICE)
- * if this function returns -EPERM.
- *
- * Returns 0 if the new default state was set, or an error if it
- * could not be set.
- */
-int rfkill_set_default(enum rfkill_type type, enum rfkill_state state)
-{
-	int error;
-
-	if (WARN((type >= RFKILL_TYPE_MAX ||
-			(state != RFKILL_STATE_SOFT_BLOCKED &&
-			 state != RFKILL_STATE_UNBLOCKED)),
-			KERN_WARNING
-			"rfkill: illegal state %d or type %d passed as "
-			"parameter to rfkill_set_default\n", state, type))
-		return -EINVAL;
-
-	mutex_lock(&rfkill_global_mutex);
-
-	if (!test_and_set_bit(type, rfkill_states_lockdflt)) {
-		rfkill_global_states[type].default_state = state;
-		rfkill_global_states[type].current_state = state;
-		error = 0;
-	} else
-		error = -EPERM;
-
-	mutex_unlock(&rfkill_global_mutex);
-	return error;
-}
-EXPORT_SYMBOL_GPL(rfkill_set_default);
-
-/*
- * Rfkill module initialization/deinitialization.
- */
-static int __init rfkill_init(void)
-{
-	int error;
-	int i;
-
-	/* RFKILL_STATE_HARD_BLOCKED is illegal here... */
-	if (rfkill_default_state != RFKILL_STATE_SOFT_BLOCKED &&
-	    rfkill_default_state != RFKILL_STATE_UNBLOCKED)
-		return -EINVAL;
-
-	for (i = 0; i < RFKILL_TYPE_MAX; i++)
-		rfkill_global_states[i].default_state = rfkill_default_state;
-
-	error = class_register(&rfkill_class);
-	if (error) {
-		printk(KERN_ERR "rfkill: unable to register rfkill class\n");
-		return error;
-	}
-
-	return 0;
-}
-
-static void __exit rfkill_exit(void)
-{
-	class_unregister(&rfkill_class);
-}
-
-subsys_initcall(rfkill_init);
-module_exit(rfkill_exit);
diff --git a/net/rfkill/rfkill-input.h b/net/rfkill/rfkill.h
index fe8df6b5b93..d1117cb6e4d 100644
--- a/net/rfkill/rfkill-input.h
+++ b/net/rfkill/rfkill.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2007 Ivo van Doorn
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
  */
 
 /*
@@ -11,11 +12,16 @@
 #ifndef __RFKILL_INPUT_H
 #define __RFKILL_INPUT_H
 
-void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state);
+/* core code */
+void rfkill_switch_all(const enum rfkill_type type, bool blocked);
 void rfkill_epo(void);
 void rfkill_restore_states(void);
 void rfkill_remove_epo_lock(void);
 bool rfkill_is_epo_lock_active(void);
-enum rfkill_state rfkill_get_global_state(const enum rfkill_type type);
+bool rfkill_get_global_sw_state(const enum rfkill_type type);
+
+/* input handler */
+int rfkill_handler_init(void);
+void rfkill_handler_exit(void);
 
 #endif /* __RFKILL_INPUT_H */
diff --git a/net/rose/rose_dev.c b/net/rose/rose_dev.c
index 7dcf2569613..389d6e0d774 100644
--- a/net/rose/rose_dev.c
+++ b/net/rose/rose_dev.c
@@ -137,7 +137,7 @@ static int rose_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (!netif_running(dev)) {
 		printk(KERN_ERR "ROSE: rose_xmit - called when iface is down\n");
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	dev_kfree_skb(skb);
 	stats->tx_errors++;
diff --git a/net/rxrpc/ar-connection.c b/net/rxrpc/ar-connection.c
index 67e38a05624..9f1ce841a0b 100644
--- a/net/rxrpc/ar-connection.c
+++ b/net/rxrpc/ar-connection.c
@@ -444,6 +444,11 @@ int rxrpc_connect_call(struct rxrpc_sock *rx,
 			conn = list_entry(bundle->avail_conns.next,
 					  struct rxrpc_connection,
 					  bundle_link);
+			if (conn->state >= RXRPC_CONN_REMOTELY_ABORTED) {
+				list_del_init(&conn->bundle_link);
+				bundle->num_conns--;
+				continue;
+			}
 			if (--conn->avail_calls == 0)
 				list_move(&conn->bundle_link,
 					  &bundle->busy_conns);
@@ -461,6 +466,11 @@ int rxrpc_connect_call(struct rxrpc_sock *rx,
 			conn = list_entry(bundle->unused_conns.next,
 					  struct rxrpc_connection,
 					  bundle_link);
+			if (conn->state >= RXRPC_CONN_REMOTELY_ABORTED) {
+				list_del_init(&conn->bundle_link);
+				bundle->num_conns--;
+				continue;
+			}
 			ASSERTCMP(conn->avail_calls, ==, RXRPC_MAXCALLS);
 			conn->avail_calls = RXRPC_MAXCALLS - 1;
 			ASSERT(conn->channels[0] == NULL &&
diff --git a/net/rxrpc/ar-connevent.c b/net/rxrpc/ar-connevent.c
index dc5cb1e1950..0505cdc4d6d 100644
--- a/net/rxrpc/ar-connevent.c
+++ b/net/rxrpc/ar-connevent.c
@@ -150,11 +150,15 @@ static int rxrpc_process_event(struct rxrpc_connection *conn,
 	u32 serial;
 	int loop, ret;
 
-	if (conn->state >= RXRPC_CONN_REMOTELY_ABORTED)
+	if (conn->state >= RXRPC_CONN_REMOTELY_ABORTED) {
+		kleave(" = -ECONNABORTED [%u]", conn->state);
 		return -ECONNABORTED;
+	}
 
 	serial = ntohl(sp->hdr.serial);
 
+	_enter("{%d},{%u,%%%u},", conn->debug_id, sp->hdr.type, serial);
+
 	switch (sp->hdr.type) {
 	case RXRPC_PACKET_TYPE_ABORT:
 		if (skb_copy_bits(skb, 0, &tmp, sizeof(tmp)) < 0)
@@ -199,6 +203,7 @@ static int rxrpc_process_event(struct rxrpc_connection *conn,
 		return 0;
 
 	default:
+		_leave(" = -EPROTO [%u]", sp->hdr.type);
 		return -EPROTO;
 	}
 }
diff --git a/net/sched/cls_cgroup.c b/net/sched/cls_cgroup.c
index e5becb92b3e..e4877ca6727 100644
--- a/net/sched/cls_cgroup.c
+++ b/net/sched/cls_cgroup.c
@@ -62,13 +62,7 @@ static u64 read_classid(struct cgroup *cgrp, struct cftype *cft)
 
 static int write_classid(struct cgroup *cgrp, struct cftype *cft, u64 value)
 {
-	if (!cgroup_lock_live_group(cgrp))
-		return -ENODEV;
-
 	cgrp_cls_state(cgrp)->classid = (u32) value;
-
-	cgroup_unlock();
-
 	return 0;
 }
 
diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c
index 0ef4e3065bc..9402a7fd378 100644
--- a/net/sched/cls_flow.c
+++ b/net/sched/cls_flow.c
@@ -84,7 +84,7 @@ static u32 flow_get_dst(const struct sk_buff *skb)
 	case htons(ETH_P_IPV6):
 		return ntohl(ipv6_hdr(skb)->daddr.s6_addr32[3]);
 	default:
-		return addr_fold(skb->dst) ^ (__force u16)skb->protocol;
+		return addr_fold(skb_dst(skb)) ^ (__force u16)skb->protocol;
 	}
 }
 
@@ -163,7 +163,7 @@ static u32 flow_get_proto_dst(const struct sk_buff *skb)
 		break;
 	}
 	default:
-		res = addr_fold(skb->dst) ^ (__force u16)skb->protocol;
+		res = addr_fold(skb_dst(skb)) ^ (__force u16)skb->protocol;
 	}
 
 	return res;
@@ -251,8 +251,8 @@ fallback:
 static u32 flow_get_rtclassid(const struct sk_buff *skb)
 {
 #ifdef CONFIG_NET_CLS_ROUTE
-	if (skb->dst)
-		return skb->dst->tclassid;
+	if (skb_dst(skb))
+		return skb_dst(skb)->tclassid;
 #endif
 	return 0;
 }
diff --git a/net/sched/cls_route.c b/net/sched/cls_route.c
index bdf1f4172ee..dd872d5383e 100644
--- a/net/sched/cls_route.c
+++ b/net/sched/cls_route.c
@@ -137,7 +137,7 @@ static int route4_classify(struct sk_buff *skb, struct tcf_proto *tp,
 	u32 id, h;
 	int iif, dont_cache = 0;
 
-	if ((dst = skb->dst) == NULL)
+	if ((dst = skb_dst(skb)) == NULL)
 		goto failure;
 
 	id = dst->tclassid;
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index fad596bf32d..266151ae85a 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -246,11 +246,11 @@ META_COLLECTOR(int_tcindex)
 
 META_COLLECTOR(int_rtclassid)
 {
-	if (unlikely(skb->dst == NULL))
+	if (unlikely(skb_dst(skb) == NULL))
 		*err = -1;
 	else
 #ifdef CONFIG_NET_CLS_ROUTE
-		dst->value = skb->dst->tclassid;
+		dst->value = skb_dst(skb)->tclassid;
 #else
 		dst->value = 0;
 #endif
@@ -258,10 +258,10 @@ META_COLLECTOR(int_rtclassid)
 
 META_COLLECTOR(int_rtiif)
 {
-	if (unlikely(skb->rtable == NULL))
+	if (unlikely(skb_rtable(skb) == NULL))
 		*err = -1;
 	else
-		dst->value = skb->rtable->fl.iif;
+		dst->value = skb_rtable(skb)->fl.iif;
 }
 
 /**************************************************************************
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 32009793307..24d17ce9c29 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -484,7 +484,7 @@ void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, psched_time_t expires)
 
 	wd->qdisc->flags |= TCQ_F_THROTTLED;
 	time = ktime_set(0, 0);
-	time = ktime_add_ns(time, PSCHED_US2NS(expires));
+	time = ktime_add_ns(time, PSCHED_TICKS2NS(expires));
 	hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS);
 }
 EXPORT_SYMBOL(qdisc_watchdog_schedule);
@@ -1680,7 +1680,7 @@ static int psched_show(struct seq_file *seq, void *v)
 
 	hrtimer_get_res(CLOCK_MONOTONIC, &ts);
 	seq_printf(seq, "%08x %08x %08x %08x\n",
-		   (u32)NSEC_PER_USEC, (u32)PSCHED_US2NS(1),
+		   (u32)NSEC_PER_USEC, (u32)PSCHED_TICKS2NS(1),
 		   1000000,
 		   (u32)NSEC_PER_SEC/(u32)ktime_to_ns(timespec_to_ktime(ts)));
 
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index d728d811173..23a167670fd 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -509,7 +509,7 @@ static void cbq_ovl_delay(struct cbq_class *cl)
 			q->pmask |= (1<<TC_CBQ_MAXPRIO);
 
 			expires = ktime_set(0, 0);
-			expires = ktime_add_ns(expires, PSCHED_US2NS(sched));
+			expires = ktime_add_ns(expires, PSCHED_TICKS2NS(sched));
 			if (hrtimer_try_to_cancel(&q->delay_timer) &&
 			    ktime_to_ns(ktime_sub(
 					hrtimer_get_expires(&q->delay_timer),
@@ -620,7 +620,7 @@ static enum hrtimer_restart cbq_undelay(struct hrtimer *timer)
 		ktime_t time;
 
 		time = ktime_set(0, 0);
-		time = ktime_add_ns(time, PSCHED_US2NS(now + delay));
+		time = ktime_add_ns(time, PSCHED_TICKS2NS(now + delay));
 		hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS);
 	}
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 5f5efe4e607..27d03816ec3 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -196,6 +196,21 @@ void __qdisc_run(struct Qdisc *q)
 	clear_bit(__QDISC_STATE_RUNNING, &q->state);
 }
 
+unsigned long dev_trans_start(struct net_device *dev)
+{
+	unsigned long val, res = dev->trans_start;
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		val = netdev_get_tx_queue(dev, i)->trans_start;
+		if (val && time_after(val, res))
+			res = val;
+	}
+	dev->trans_start = res;
+	return res;
+}
+EXPORT_SYMBOL(dev_trans_start);
+
 static void dev_watchdog(unsigned long arg)
 {
 	struct net_device *dev = (struct net_device *)arg;
@@ -205,25 +220,30 @@ static void dev_watchdog(unsigned long arg)
 		if (netif_device_present(dev) &&
 		    netif_running(dev) &&
 		    netif_carrier_ok(dev)) {
-			int some_queue_stopped = 0;
+			int some_queue_timedout = 0;
 			unsigned int i;
+			unsigned long trans_start;
 
 			for (i = 0; i < dev->num_tx_queues; i++) {
 				struct netdev_queue *txq;
 
 				txq = netdev_get_tx_queue(dev, i);
-				if (netif_tx_queue_stopped(txq)) {
-					some_queue_stopped = 1;
+				/*
+				 * old device drivers set dev->trans_start
+				 */
+				trans_start = txq->trans_start ? : dev->trans_start;
+				if (netif_tx_queue_stopped(txq) &&
+				    time_after(jiffies, (trans_start +
+							 dev->watchdog_timeo))) {
+					some_queue_timedout = 1;
 					break;
 				}
 			}
 
-			if (some_queue_stopped &&
-			    time_after(jiffies, (dev->trans_start +
-						 dev->watchdog_timeo))) {
+			if (some_queue_timedout) {
 				char drivername[64];
-				WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
-				       dev->name, netdev_drivername(dev, drivername, 64));
+				WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n",
+				       dev->name, netdev_drivername(dev, drivername, 64), i);
 				dev->netdev_ops->ndo_tx_timeout(dev);
 			}
 			if (!mod_timer(&dev->watchdog_timer,
@@ -602,8 +622,10 @@ static void transition_one_qdisc(struct net_device *dev,
 		clear_bit(__QDISC_STATE_DEACTIVATED, &new_qdisc->state);
 
 	rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
-	if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
+	if (need_watchdog_p && new_qdisc != &noqueue_qdisc) {
+		dev_queue->trans_start = 0;
 		*need_watchdog_p = 1;
+	}
 }
 
 void dev_activate(struct net_device *dev)
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 5022f9c1f34..362c2811b2d 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -372,7 +372,7 @@ cftree_update(struct hfsc_class *cl)
  *	ism: (psched_us/byte) << ISM_SHIFT
  *	dx: psched_us
  *
- * The clock source resolution with ktime is 1.024us.
+ * The clock source resolution with ktime and PSCHED_SHIFT 10 is 1.024us.
  *
  * sm and ism are scaled in order to keep effective digits.
  * SM_SHIFT and ISM_SHIFT are selected to keep at least 4 effective
@@ -383,9 +383,11 @@ cftree_update(struct hfsc_class *cl)
  *  bytes/1.024us 12.8e-3    128e-3     1280e-3    12800e-3   128000e-3
  *
  *  1.024us/byte  78.125     7.8125     0.78125    0.078125   0.0078125
+ *
+ * So, for PSCHED_SHIFT 10 we need: SM_SHIFT 20, ISM_SHIFT 18.
  */
-#define	SM_SHIFT	20
-#define	ISM_SHIFT	18
+#define	SM_SHIFT	(30 - PSCHED_SHIFT)
+#define	ISM_SHIFT	(8 + PSCHED_SHIFT)
 
 #define	SM_MASK		((1ULL << SM_SHIFT) - 1)
 #define	ISM_MASK	((1ULL << ISM_SHIFT) - 1)
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 33133d27b53..8706920a6d4 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -149,7 +149,7 @@ static unsigned sfq_hash(struct sfq_sched_data *q, struct sk_buff *skb)
 		break;
 	}
 	default:
-		h = (unsigned long)skb->dst ^ skb->protocol;
+		h = (unsigned long)skb_dst(skb) ^ skb->protocol;
 		h2 = (unsigned long)skb->sk;
 	}
 
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 3b641829723..9c002b6e053 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -58,7 +58,6 @@ struct teql_master
 	struct net_device *dev;
 	struct Qdisc *slaves;
 	struct list_head master_list;
-	struct net_device_stats stats;
 };
 
 struct teql_sched_data
@@ -223,7 +222,7 @@ __teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device *
 {
 	struct netdev_queue *dev_queue = netdev_get_tx_queue(dev, 0);
 	struct teql_sched_data *q = qdisc_priv(dev_queue->qdisc);
-	struct neighbour *mn = skb->dst->neighbour;
+	struct neighbour *mn = skb_dst(skb)->neighbour;
 	struct neighbour *n = q->ncache;
 
 	if (mn->tbl == NULL)
@@ -263,8 +262,8 @@ static inline int teql_resolve(struct sk_buff *skb,
 		return -ENODEV;
 
 	if (dev->header_ops == NULL ||
-	    skb->dst == NULL ||
-	    skb->dst->neighbour == NULL)
+	    skb_dst(skb) == NULL ||
+	    skb_dst(skb)->neighbour == NULL)
 		return 0;
 	return __teql_resolve(skb, skb_res, dev);
 }
@@ -272,6 +271,7 @@ static inline int teql_resolve(struct sk_buff *skb,
 static int teql_master_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct teql_master *master = netdev_priv(dev);
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct Qdisc *start, *q;
 	int busy;
 	int nores;
@@ -308,11 +308,12 @@ restart:
 				if (!netif_tx_queue_stopped(slave_txq) &&
 				    !netif_tx_queue_frozen(slave_txq) &&
 				    slave_ops->ndo_start_xmit(skb, slave) == 0) {
+					txq_trans_update(slave_txq);
 					__netif_tx_unlock(slave_txq);
 					master->slaves = NEXT_SLAVE(q);
 					netif_wake_queue(dev);
-					master->stats.tx_packets++;
-					master->stats.tx_bytes += length;
+					txq->tx_packets++;
+					txq->tx_bytes += length;
 					return 0;
 				}
 				__netif_tx_unlock(slave_txq);
@@ -337,12 +338,12 @@ restart:
 
 	if (busy) {
 		netif_stop_queue(dev);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
-	master->stats.tx_errors++;
+	dev->stats.tx_errors++;
 
 drop:
-	master->stats.tx_dropped++;
+	txq->tx_dropped++;
 	dev_kfree_skb(skb);
 	return 0;
 }
@@ -395,12 +396,6 @@ static int teql_master_close(struct net_device *dev)
 	return 0;
 }
 
-static struct net_device_stats *teql_master_stats(struct net_device *dev)
-{
-	struct teql_master *m = netdev_priv(dev);
-	return &m->stats;
-}
-
 static int teql_master_mtu(struct net_device *dev, int new_mtu)
 {
 	struct teql_master *m = netdev_priv(dev);
@@ -425,7 +420,6 @@ static const struct net_device_ops teql_netdev_ops = {
 	.ndo_open	= teql_master_open,
 	.ndo_stop	= teql_master_close,
 	.ndo_start_xmit	= teql_master_xmit,
-	.ndo_get_stats	= teql_master_stats,
 	.ndo_change_mtu	= teql_master_mtu,
 };
 
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index f4b23043b61..525864bf4f0 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -293,7 +293,8 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
 	 * told otherwise.
 	 */
 	asoc->peer.ipv4_address = 1;
-	asoc->peer.ipv6_address = 1;
+	if (asoc->base.sk->sk_family == PF_INET6)
+		asoc->peer.ipv6_address = 1;
 	INIT_LIST_HEAD(&asoc->asocs);
 
 	asoc->autoclose = sp->autoclose;
@@ -566,6 +567,21 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
 	if (asoc->init_last_sent_to == peer)
 		asoc->init_last_sent_to = NULL;
 
+	/* If we remove the transport an SHUTDOWN was last sent to, set it
+	 * to NULL. Combined with the update of the retran path above, this
+	 * will cause the next SHUTDOWN to be sent to the next available
+	 * transport, maintaining the cycle.
+	 */
+	if (asoc->shutdown_last_sent_to == peer)
+		asoc->shutdown_last_sent_to = NULL;
+
+	/* If we remove the transport an ASCONF was last sent to, set it to
+	 * NULL.
+	 */
+	if (asoc->addip_last_asconf &&
+	    asoc->addip_last_asconf->transport == peer)
+		asoc->addip_last_asconf->transport = NULL;
+
 	asoc->peer.transport_count--;
 
 	sctp_transport_free(peer);
@@ -1268,49 +1284,21 @@ void sctp_assoc_update_retran_path(struct sctp_association *asoc)
 				 ntohs(t->ipaddr.v4.sin_port));
 }
 
-/* Choose the transport for sending a INIT packet.  */
-struct sctp_transport *sctp_assoc_choose_init_transport(
-	struct sctp_association *asoc)
-{
-	struct sctp_transport *t;
-
-	/* Use the retran path. If the last INIT was sent over the
-	 * retran path, update the retran path and use it.
-	 */
-	if (!asoc->init_last_sent_to) {
-		t = asoc->peer.active_path;
-	} else {
-		if (asoc->init_last_sent_to == asoc->peer.retran_path)
-			sctp_assoc_update_retran_path(asoc);
-		t = asoc->peer.retran_path;
-	}
-
-	SCTP_DEBUG_PRINTK_IPADDR("sctp_assoc_update_retran_path:association"
-				 " %p addr: ",
-				 " port: %d\n",
-				 asoc,
-				 (&t->ipaddr),
-				 ntohs(t->ipaddr.v4.sin_port));
-
-	return t;
-}
-
-/* Choose the transport for sending a SHUTDOWN packet.  */
-struct sctp_transport *sctp_assoc_choose_shutdown_transport(
-	struct sctp_association *asoc)
+/* Choose the transport for sending retransmit packet.  */
+struct sctp_transport *sctp_assoc_choose_alter_transport(
+	struct sctp_association *asoc, struct sctp_transport *last_sent_to)
 {
-	/* If this is the first time SHUTDOWN is sent, use the active path,
-	 * else use the retran path. If the last SHUTDOWN was sent over the
+	/* If this is the first time packet is sent, use the active path,
+	 * else use the retran path. If the last packet was sent over the
 	 * retran path, update the retran path and use it.
 	 */
-	if (!asoc->shutdown_last_sent_to)
+	if (!last_sent_to)
 		return asoc->peer.active_path;
 	else {
-		if (asoc->shutdown_last_sent_to == asoc->peer.retran_path)
+		if (last_sent_to == asoc->peer.retran_path)
 			sctp_assoc_update_retran_path(asoc);
 		return asoc->peer.retran_path;
 	}
-
 }
 
 /* Update the association's pmtu and frag_point by going through all the
@@ -1482,6 +1470,10 @@ int sctp_assoc_set_id(struct sctp_association *asoc, gfp_t gfp)
 {
 	int assoc_id;
 	int error = 0;
+
+	/* If the id is already assigned, keep it. */
+	if (asoc->assoc_id)
+		return error;
 retry:
 	if (unlikely(!idr_pre_get(&sctp_assocs_id, gfp)))
 		return -ENOMEM;
diff --git a/net/sctp/input.c b/net/sctp/input.c
index d2e98803ffe..c0c973e67ad 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -81,13 +81,13 @@ static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
 /* Calculate the SCTP checksum of an SCTP packet.  */
 static inline int sctp_rcv_checksum(struct sk_buff *skb)
 {
-	struct sk_buff *list = skb_shinfo(skb)->frag_list;
 	struct sctphdr *sh = sctp_hdr(skb);
 	__le32 cmp = sh->checksum;
+	struct sk_buff *list;
 	__le32 val;
 	__u32 tmp = sctp_start_cksum((__u8 *)sh, skb_headlen(skb));
 
-	for (; list; list = list->next)
+	skb_walk_frags(skb, list)
 		tmp = sctp_update_cksum((__u8 *)list->data, skb_headlen(list),
 					tmp);
 
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 7d08f522ec8..b7641144451 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -405,13 +405,14 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 			sctp_assoc_sync_pmtu(asoc);
 		}
 	}
-	nskb->dst = dst_clone(tp->dst);
-	if (!nskb->dst)
+	dst = dst_clone(tp->dst);
+	skb_dst_set(nskb, dst);
+	if (dst)
 		goto no_route;
-	dst = nskb->dst;
 
 	/* Build the SCTP header.  */
 	sh = (struct sctphdr *)skb_push(nskb, sizeof(struct sctphdr));
+	skb_reset_transport_header(nskb);
 	sh->source = htons(packet->source_port);
 	sh->dest   = htons(packet->destination_port);
 
@@ -527,15 +528,25 @@ int sctp_packet_transmit(struct sctp_packet *packet)
 	 * Note: Adler-32 is no longer applicable, as has been replaced
 	 * by CRC32-C as described in <draft-ietf-tsvwg-sctpcsum-02.txt>.
 	 */
-	if (!sctp_checksum_disable && !(dst->dev->features & NETIF_F_NO_CSUM)) {
+	if (!sctp_checksum_disable &&
+	    !(dst->dev->features & (NETIF_F_NO_CSUM | NETIF_F_SCTP_CSUM))) {
 		__u32 crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
 
 		/* 3) Put the resultant value into the checksum field in the
 		 *    common header, and leave the rest of the bits unchanged.
 		 */
 		sh->checksum = sctp_end_cksum(crc32);
-	} else
-		nskb->ip_summed = CHECKSUM_UNNECESSARY;
+	} else {
+		if (dst->dev->features & NETIF_F_SCTP_CSUM) {
+			/* no need to seed psuedo checksum for SCTP */
+			nskb->ip_summed = CHECKSUM_PARTIAL;
+			nskb->csum_start = (skb_transport_header(nskb) -
+			                    nskb->head);
+			nskb->csum_offset = offsetof(struct sctphdr, checksum);
+		} else {
+			nskb->ip_summed = CHECKSUM_UNNECESSARY;
+		}
+	}
 
 	/* IP layer ECN support
 	 * From RFC 2481
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 8eb3e61cb70..79cbd47f4df 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -393,7 +393,7 @@ static int sctp_v4_addr_valid(union sctp_addr *addr,
 		return 0;
 
 	/* Is this a broadcast address? */
-	if (skb && skb->rtable->rt_flags & RTCF_BROADCAST)
+	if (skb && skb_rtable(skb)->rt_flags & RTCF_BROADCAST)
 		return 0;
 
 	return 1;
@@ -572,7 +572,7 @@ static void sctp_v4_get_saddr(struct sctp_sock *sk,
 /* What interface did this skb arrive on? */
 static int sctp_v4_skb_iif(const struct sk_buff *skb)
 {
-	return skb->rtable->rt_iif;
+	return skb_rtable(skb)->rt_iif;
 }
 
 /* Was this packet marked by Explicit Congestion Notification? */
@@ -848,8 +848,8 @@ static inline int sctp_v4_xmit(struct sk_buff *skb,
 
 	SCTP_DEBUG_PRINTK("%s: skb:%p, len:%d, src:%pI4, dst:%pI4\n",
 			  __func__, skb, skb->len,
-			  &skb->rtable->rt_src,
-			  &skb->rtable->rt_dst);
+			  &skb_rtable(skb)->rt_src,
+			  &skb_rtable(skb)->rt_dst);
 
 	inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ?
 			 IP_PMTUDISC_DO : IP_PMTUDISC_DONT;
@@ -1370,6 +1370,8 @@ SCTP_STATIC __exit void sctp_exit(void)
 	sctp_proc_exit();
 	cleanup_sctp_mibs();
 
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
+
 	kmem_cache_destroy(sctp_chunk_cachep);
 	kmem_cache_destroy(sctp_bucket_cachep);
 }
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 6851ee94e97..61cc6075b0d 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2864,19 +2864,19 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 	switch (addr_param->v4.param_hdr.type) {
 	case SCTP_PARAM_IPV6_ADDRESS:
 		if (!asoc->peer.ipv6_address)
-			return SCTP_ERROR_INV_PARAM;
+			return SCTP_ERROR_DNS_FAILED;
 		break;
 	case SCTP_PARAM_IPV4_ADDRESS:
 		if (!asoc->peer.ipv4_address)
-			return SCTP_ERROR_INV_PARAM;
+			return SCTP_ERROR_DNS_FAILED;
 		break;
 	default:
-		return SCTP_ERROR_INV_PARAM;
+		return SCTP_ERROR_DNS_FAILED;
 	}
 
 	af = sctp_get_af_specific(param_type2af(addr_param->v4.param_hdr.type));
 	if (unlikely(!af))
-		return SCTP_ERROR_INV_PARAM;
+		return SCTP_ERROR_DNS_FAILED;
 
 	af->from_addr_param(&addr, addr_param, htons(asoc->peer.port), 0);
 
@@ -2886,7 +2886,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 	 *  make sure we check for that)
 	 */
 	if (!af->is_any(&addr) && !af->addr_valid(&addr, NULL, asconf->skb))
-		return SCTP_ERROR_INV_PARAM;
+		return SCTP_ERROR_DNS_FAILED;
 
 	switch (asconf_param->param_hdr.type) {
 	case SCTP_PARAM_ADD_IP:
@@ -2954,12 +2954,12 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 
 		peer = sctp_assoc_lookup_paddr(asoc, &addr);
 		if (!peer)
-			return SCTP_ERROR_INV_PARAM;
+			return SCTP_ERROR_DNS_FAILED;
 
 		sctp_assoc_set_primary(asoc, peer);
 		break;
 	default:
-		return SCTP_ERROR_INV_PARAM;
+		return SCTP_ERROR_UNKNOWN_PARAM;
 		break;
 	}
 
@@ -3273,7 +3273,7 @@ int sctp_process_asconf_ack(struct sctp_association *asoc,
 			retval = 1;
 			break;
 
-		case SCTP_ERROR_INV_PARAM:
+		case SCTP_ERROR_UNKNOWN_PARAM:
 			/* Disable sending this type of asconf parameter in
 			 * future.
 			 */
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index e2020eb2c8c..86426aac160 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -686,7 +686,8 @@ static void sctp_cmd_setup_t2(sctp_cmd_seq_t *cmds,
 {
 	struct sctp_transport *t;
 
-	t = sctp_assoc_choose_shutdown_transport(asoc);
+	t = sctp_assoc_choose_alter_transport(asoc,
+					      asoc->shutdown_last_sent_to);
 	asoc->shutdown_last_sent_to = t;
 	asoc->timeouts[SCTP_EVENT_TIMEOUT_T2_SHUTDOWN] = t->rto;
 	chunk->transport = t;
@@ -777,7 +778,7 @@ static void sctp_cmd_setup_t4(sctp_cmd_seq_t *cmds,
 {
 	struct sctp_transport *t;
 
-	t = asoc->peer.active_path;
+	t = sctp_assoc_choose_alter_transport(asoc, chunk->transport);
 	asoc->timeouts[SCTP_EVENT_TIMEOUT_T4_RTO] = t->rto;
 	chunk->transport = t;
 }
@@ -1379,7 +1380,8 @@ static int sctp_cmd_interpreter(sctp_event_t event_type,
 
 		case SCTP_CMD_INIT_CHOOSE_TRANSPORT:
 			chunk = cmd->obj.ptr;
-			t = sctp_assoc_choose_init_transport(asoc);
+			t = sctp_assoc_choose_alter_transport(asoc,
+						asoc->init_last_sent_to);
 			asoc->init_last_sent_to = t;
 			chunk->transport = t;
 			t->init_sent_count++;
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 55a61aa6966..7288192f7df 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -5432,9 +5432,13 @@ sctp_disposition_t sctp_sf_t2_timer_expire(const struct sctp_endpoint *ep,
 	if (!reply)
 		goto nomem;
 
-	/* Do some failure management (Section 8.2). */
-	sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE,
-			SCTP_TRANSPORT(asoc->shutdown_last_sent_to));
+	/* Do some failure management (Section 8.2).
+	 * If we remove the transport an SHUTDOWN was last sent to, don't
+	 * do failure management.
+	 */
+	if (asoc->shutdown_last_sent_to)
+		sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE,
+				SCTP_TRANSPORT(asoc->shutdown_last_sent_to));
 
 	/* Set the transport for the SHUTDOWN/ACK chunk and the timeout for
 	 * the T2-shutdown timer.
@@ -5471,7 +5475,9 @@ sctp_disposition_t sctp_sf_t4_timer_expire(
 	 * detection on the appropriate destination address as defined in
 	 * RFC2960 [5] section 8.1 and 8.2.
 	 */
-	sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE, SCTP_TRANSPORT(transport));
+	if (transport)
+		sctp_add_cmd_sf(commands, SCTP_CMD_STRIKE,
+				SCTP_TRANSPORT(transport));
 
 	/* Reconfig T4 timer and transport. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_SETUP_T4, SCTP_CHUNK(chunk));
diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c
index 5c8186d88c6..6d9b3aafcc5 100644
--- a/net/sctp/sm_statetable.c
+++ b/net/sctp/sm_statetable.c
@@ -698,7 +698,7 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 	TYPE_SCTP_FUNC(sctp_sf_do_prm_asconf), \
 	/* SCTP_STATE_SHUTDOWN_ACK_SENT */ \
 	TYPE_SCTP_FUNC(sctp_sf_error_shutdown), \
-} /* TYPE_SCTP_PRIMITIVE_REQUESTHEARTBEAT */
+} /* TYPE_SCTP_PRIMITIVE_ASCONF */
 
 /* The primary index for this table is the primitive type.
  * The secondary index for this table is the state.
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 5fb3a8c9792..0f01e5d8a24 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1100,6 +1100,15 @@ static int __sctp_connect(struct sock* sk,
 		goto out_free;
 	}
 
+	/* In case the user of sctp_connectx() wants an association
+	 * id back, assign one now.
+	 */
+	if (assoc_id) {
+		err = sctp_assoc_set_id(asoc, GFP_KERNEL);
+		if (err < 0)
+			goto out_free;
+	}
+
 	err = sctp_primitive_ASSOCIATE(asoc, NULL);
 	if (err < 0) {
 		goto out_free;
@@ -1120,7 +1129,7 @@ static int __sctp_connect(struct sock* sk,
 	timeo = sock_sndtimeo(sk, f_flags & O_NONBLOCK);
 
 	err = sctp_wait_for_connect(asoc, &timeo);
-	if (!err && assoc_id)
+	if ((err == 0 || err == -EINPROGRESS) && assoc_id)
 		*assoc_id = asoc->assoc_id;
 
 	/* Don't free association on exit. */
@@ -1264,6 +1273,34 @@ SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk,
 		return assoc_id;
 }
 
+/*
+ * New (hopefully final) interface for the API.  The option buffer is used
+ * both for the returned association id and the addresses.
+ */
+SCTP_STATIC int sctp_getsockopt_connectx3(struct sock* sk, int len,
+					char __user *optval,
+					int __user *optlen)
+{
+	sctp_assoc_t assoc_id = 0;
+	int err = 0;
+
+	if (len < sizeof(assoc_id))
+		return -EINVAL;
+
+	err = __sctp_setsockopt_connectx(sk,
+			(struct sockaddr __user *)(optval + sizeof(assoc_id)),
+			len - sizeof(assoc_id), &assoc_id);
+
+	if (err == 0 || err == -EINPROGRESS) {
+		if (copy_to_user(optval, &assoc_id, sizeof(assoc_id)))
+			return -EFAULT;
+		if (put_user(sizeof(assoc_id), optlen))
+			return -EFAULT;
+	}
+
+	return err;
+}
+
 /* API 3.1.4 close() - UDP Style Syntax
  * Applications use close() to perform graceful shutdown (as described in
  * Section 10.1 of [SCTP]) on ALL the associations currently represented
@@ -1844,7 +1881,7 @@ static int sctp_skb_pull(struct sk_buff *skb, int len)
 	len -= skb_len;
 	__skb_pull(skb, skb_len);
 
-	for (list = skb_shinfo(skb)->frag_list; list; list = list->next) {
+	skb_walk_frags(skb, list) {
 		rlen = sctp_skb_pull(list, len);
 		skb->len -= (len-rlen);
 		skb->data_len -= (len-rlen);
@@ -5578,6 +5615,9 @@ SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname,
 		retval = sctp_getsockopt_local_addrs(sk, len, optval,
 						     optlen);
 		break;
+	case SCTP_SOCKOPT_CONNECTX3:
+		retval = sctp_getsockopt_connectx3(sk, len, optval, optlen);
+		break;
 	case SCTP_DEFAULT_SEND_PARAM:
 		retval = sctp_getsockopt_default_send_param(sk, len,
 							    optval, optlen);
@@ -6620,7 +6660,7 @@ static void sctp_sock_rfree_frag(struct sk_buff *skb)
 		goto done;
 
 	/* Don't forget the fragments. */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next)
+	skb_walk_frags(skb, frag)
 		sctp_sock_rfree_frag(frag);
 
 done:
@@ -6635,7 +6675,7 @@ static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
 		goto done;
 
 	/* Don't forget the fragments. */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next)
+	skb_walk_frags(skb, frag)
 		sctp_skb_set_owner_r_frag(frag, sk);
 
 done:
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index f58e994e685..63eabbc7129 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -49,8 +49,8 @@ static int zero = 0;
 static int one = 1;
 static int timer_max = 86400000; /* ms in one day */
 static int int_max = INT_MAX;
-static long sack_timer_min = 1;
-static long sack_timer_max = 500;
+static int sack_timer_min = 1;
+static int sack_timer_max = 500;
 
 extern int sysctl_sctp_mem[3];
 extern int sysctl_sctp_rmem[3];
@@ -223,7 +223,7 @@ static ctl_table sctp_table[] = {
 		.ctl_name	= NET_SCTP_SACK_TIMEOUT,
 		.procname	= "sack_timeout",
 		.data		= &sctp_sack_timeout,
-		.maxlen		= sizeof(long),
+		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
 		.strategy	= sysctl_intvec,
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 5f186ca550d..8b3560fd876 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -976,9 +976,8 @@ static void sctp_ulpevent_receive_data(struct sctp_ulpevent *event,
 	 * In general, the skb passed from IP can have only 1 level of
 	 * fragments. But we allow multiple levels of fragments.
 	 */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+	skb_walk_frags(skb, frag)
 		sctp_ulpevent_receive_data(sctp_skb2event(frag), asoc);
-	}
 }
 
 /* Do accounting for bytes just read by user and release the references to
@@ -1003,7 +1002,7 @@ static void sctp_ulpevent_release_data(struct sctp_ulpevent *event)
 		goto done;
 
 	/* Don't forget the fragments. */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+	skb_walk_frags(skb, frag) {
 		/* NOTE:  skb_shinfos are recursive. Although IP returns
 		 * skb's with only 1 level of fragments, SCTP reassembly can
 		 * increase the levels.
@@ -1026,7 +1025,7 @@ static void sctp_ulpevent_release_frag_data(struct sctp_ulpevent *event)
 		goto done;
 
 	/* Don't forget the fragments. */
-	for (frag = skb_shinfo(skb)->frag_list; frag; frag = frag->next) {
+	skb_walk_frags(skb, frag) {
 		/* NOTE:  skb_shinfos are recursive. Although IP returns
 		 * skb's with only 1 level of fragments, SCTP reassembly can
 		 * increase the levels.
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index e630b38a604..66d458fc692 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -1548,6 +1548,7 @@ static void __exit exit_rpcsec_gss(void)
 {
 	gss_svc_shutdown();
 	rpcauth_unregister(&authgss_ops);
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 MODULE_LICENSE("GPL");
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 8847add6ca1..5ed8931dfe9 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -124,7 +124,7 @@ svc_pool_map_choose_mode(void)
 {
 	unsigned int node;
 
-	if (num_online_nodes() > 1) {
+	if (nr_online_nodes > 1) {
 		/*
 		 * Actually have multiple NUMA nodes,
 		 * so split pools on NUMA node boundaries
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index e1859614601..6c2d6158655 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -918,7 +918,7 @@ static void xs_udp_data_ready(struct sock *sk, int len)
 	UDPX_INC_STATS_BH(sk, UDP_MIB_INDATAGRAMS);
 
 	/* Something worked... */
-	dst_confirm(skb->dst);
+	dst_confirm(skb_dst(skb));
 
 	xprt_adjust_cwnd(task, copied);
 	xprt_update_rtt(task);
diff --git a/net/tipc/eth_media.c b/net/tipc/eth_media.c
index f72ba774c24..524ba5696d4 100644
--- a/net/tipc/eth_media.c
+++ b/net/tipc/eth_media.c
@@ -167,7 +167,7 @@ static int enable_bearer(struct tipc_bearer *tb_ptr)
 	tb_ptr->mtu = dev->mtu;
 	tb_ptr->blocked = 0;
 	tb_ptr->addr.type = htonl(TIPC_MEDIA_TYPE_ETH);
-	memcpy(&tb_ptr->addr.dev_addr, &dev->dev_addr, ETH_ALEN);
+	memcpy(&tb_ptr->addr.dev_addr, dev->dev_addr, ETH_ALEN);
 	return 0;
 }
 
diff --git a/net/tipc/netlink.c b/net/tipc/netlink.c
index c387217bb23..3c57005e44d 100644
--- a/net/tipc/netlink.c
+++ b/net/tipc/netlink.c
@@ -68,7 +68,7 @@ static int handle_cmd(struct sk_buff *skb, struct genl_info *info)
 	return 0;
 }
 
-static struct genl_family family = {
+static struct genl_family tipc_genl_family = {
 	.id		= GENL_ID_GENERATE,
 	.name		= TIPC_GENL_NAME,
 	.version	= TIPC_GENL_VERSION,
@@ -76,39 +76,33 @@ static struct genl_family family = {
 	.maxattr	= 0,
 };
 
-static struct genl_ops ops = {
+static struct genl_ops tipc_genl_ops = {
 	.cmd		= TIPC_GENL_CMD,
 	.doit		= handle_cmd,
 };
 
-static int family_registered = 0;
+static int tipc_genl_family_registered;
 
 int tipc_netlink_start(void)
 {
+	int res;
 
+	res = genl_register_family_with_ops(&tipc_genl_family,
+		&tipc_genl_ops, 1);
+	if (res) {
+		err("Failed to register netlink interface\n");
+		return res;
+	}
 
-	if (genl_register_family(&family))
-		goto err;
-
-	family_registered = 1;
-
-	if (genl_register_ops(&family, &ops))
-		goto err_unregister;
-
+	tipc_genl_family_registered = 1;
 	return 0;
-
- err_unregister:
-	genl_unregister_family(&family);
-	family_registered = 0;
- err:
-	err("Failed to register netlink interface\n");
-	return -EFAULT;
 }
 
 void tipc_netlink_stop(void)
 {
-	if (family_registered) {
-		genl_unregister_family(&family);
-		family_registered = 0;
-	}
+	if (!tipc_genl_family_registered)
+		return;
+
+	genl_unregister_family(&tipc_genl_family);
+	tipc_genl_family_registered = 0;
 }
diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig
index 1b46747a5f5..e4d97ab476d 100644
--- a/net/wimax/Kconfig
+++ b/net/wimax/Kconfig
@@ -1,23 +1,10 @@
 #
 # WiMAX LAN device configuration
 #
-# Note the ugly 'depends on' on WIMAX: that disallows RFKILL to be a
-# module if WIMAX is to be linked in. The WiMAX code is done in such a
-# way that it doesn't require and explicit dependency on RFKILL in
-# case an embedded system wants to rip it out.
-#
-# As well, enablement of the RFKILL code means we need the INPUT layer
-# support to inject events coming from hw rfkill switches. That
-# dependency could be killed if input.h provided appropriate means to
-# work when input is disabled.
-
-comment "WiMAX Wireless Broadband support requires CONFIG_INPUT enabled"
-	depends on INPUT = n && RFKILL != n
 
 menuconfig WIMAX
 	tristate "WiMAX Wireless Broadband support"
-	depends on (y && RFKILL != m) || m
-	depends on (INPUT && RFKILL != n) || RFKILL = n
+	depends on RFKILL || !RFKILL
 	help
 
 	  Select to configure support for devices that provide
diff --git a/net/wimax/Makefile b/net/wimax/Makefile
index 5b80b941c2c..8f1510d0cc2 100644
--- a/net/wimax/Makefile
+++ b/net/wimax/Makefile
@@ -6,6 +6,7 @@ wimax-y :=		\
 	op-msg.o	\
 	op-reset.o	\
 	op-rfkill.o	\
+	op-state-get.o	\
 	stack.o
 
 wimax-$(CONFIG_DEBUG_FS) += debugfs.o
diff --git a/net/wimax/debug-levels.h b/net/wimax/debug-levels.h
index 1c29123a3aa..0975adba6b7 100644
--- a/net/wimax/debug-levels.h
+++ b/net/wimax/debug-levels.h
@@ -36,6 +36,7 @@ enum d_module {
 	D_SUBMODULE_DECLARE(op_msg),
 	D_SUBMODULE_DECLARE(op_reset),
 	D_SUBMODULE_DECLARE(op_rfkill),
+	D_SUBMODULE_DECLARE(op_state_get),
 	D_SUBMODULE_DECLARE(stack),
 };
 
diff --git a/net/wimax/debugfs.c b/net/wimax/debugfs.c
index 94d216a4640..6c9bedb7431 100644
--- a/net/wimax/debugfs.c
+++ b/net/wimax/debugfs.c
@@ -61,6 +61,7 @@ int wimax_debugfs_add(struct wimax_dev *wimax_dev)
 	__debugfs_register("wimax_dl_", op_msg, dentry);
 	__debugfs_register("wimax_dl_", op_reset, dentry);
 	__debugfs_register("wimax_dl_", op_rfkill, dentry);
+	__debugfs_register("wimax_dl_", op_state_get, dentry);
 	__debugfs_register("wimax_dl_", stack, dentry);
 	result = 0;
 out:
diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c
index 9ad4d893a56..d631a17186b 100644
--- a/net/wimax/op-msg.c
+++ b/net/wimax/op-msg.c
@@ -108,6 +108,12 @@
  * Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
  * wimax_msg_send() depends on skb->data being placed at the
  * beginning of the user message.
+ *
+ * Unlike other WiMAX stack calls, this call can be used way early,
+ * even before wimax_dev_add() is called, as long as the
+ * wimax_dev->net_dev pointer is set to point to a proper
+ * net_dev. This is so that drivers can use it early in case they need
+ * to send stuff around or communicate with user space.
  */
 struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
 				const char *pipe_name,
@@ -115,7 +121,7 @@ struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
 				gfp_t gfp_flags)
 {
 	int result;
-	struct device *dev = wimax_dev->net_dev->dev.parent;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	size_t msg_size;
 	void *genl_msg;
 	struct sk_buff *skb;
@@ -161,7 +167,6 @@ error_genlmsg_put:
 error_new:
 	nlmsg_free(skb);
 	return ERR_PTR(result);
-
 }
 EXPORT_SYMBOL_GPL(wimax_msg_alloc);
 
@@ -256,10 +261,16 @@ EXPORT_SYMBOL_GPL(wimax_msg_len);
  * Don't use skb_push()/skb_pull()/skb_reserve() on the skb, as
  * wimax_msg_send() depends on skb->data being placed at the
  * beginning of the user message.
+ *
+ * Unlike other WiMAX stack calls, this call can be used way early,
+ * even before wimax_dev_add() is called, as long as the
+ * wimax_dev->net_dev pointer is set to point to a proper
+ * net_dev. This is so that drivers can use it early in case they need
+ * to send stuff around or communicate with user space.
  */
 int wimax_msg_send(struct wimax_dev *wimax_dev, struct sk_buff *skb)
 {
-	struct device *dev = wimax_dev->net_dev->dev.parent;
+	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	void *msg = skb->data;
 	size_t size = skb->len;
 	might_sleep();
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 2b75aee0421..70ef4df863b 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -29,8 +29,8 @@
  * A non-polled generic rfkill device is embedded into the WiMAX
  * subsystem's representation of a device.
  *
- * FIXME: Need polled support? use a timer or add the implementation
- *     to the stack.
+ * FIXME: Need polled support? Let drivers provide a poll routine
+ *	  and hand it to rfkill ops then?
  *
  * All device drivers have to do is after wimax_dev_init(), call
  * wimax_report_rfkill_hw() and wimax_report_rfkill_sw() to update
@@ -43,7 +43,7 @@
  *   wimax_rfkill()             Kernel calling wimax_rfkill()
  *     __wimax_rf_toggle_radio()
  *
- * wimax_rfkill_toggle_radio()  RF-Kill subsytem calling
+ * wimax_rfkill_set_radio_block()  RF-Kill subsytem calling
  *   __wimax_rf_toggle_radio()
  *
  * __wimax_rf_toggle_radio()
@@ -65,15 +65,11 @@
 #include <linux/wimax.h>
 #include <linux/security.h>
 #include <linux/rfkill.h>
-#include <linux/input.h>
 #include "wimax-internal.h"
 
 #define D_SUBMODULE op_rfkill
 #include "debug-levels.h"
 
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-
-
 /**
  * wimax_report_rfkill_hw - Reports changes in the hardware RF switch
  *
@@ -99,7 +95,6 @@ void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
 	int result;
 	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	enum wimax_st wimax_state;
-	enum rfkill_state rfkill_state;
 
 	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
 	BUG_ON(state == WIMAX_RF_QUERY);
@@ -112,16 +107,16 @@ void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
 
 	if (state != wimax_dev->rf_hw) {
 		wimax_dev->rf_hw = state;
-		rfkill_state = state == WIMAX_RF_ON ?
-			RFKILL_STATE_OFF : RFKILL_STATE_ON;
 		if (wimax_dev->rf_hw == WIMAX_RF_ON
 		    && wimax_dev->rf_sw == WIMAX_RF_ON)
 			wimax_state = WIMAX_ST_READY;
 		else
 			wimax_state = WIMAX_ST_RADIO_OFF;
+
+		result = rfkill_set_hw_state(wimax_dev->rfkill,
+					     state == WIMAX_RF_OFF);
+
 		__wimax_state_change(wimax_dev, wimax_state);
-		input_report_key(wimax_dev->rfkill_input, KEY_WIMAX,
-				 rfkill_state);
 	}
 error_not_ready:
 	mutex_unlock(&wimax_dev->mutex);
@@ -174,6 +169,7 @@ void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev,
 		else
 			wimax_state = WIMAX_ST_RADIO_OFF;
 		__wimax_state_change(wimax_dev, wimax_state);
+		rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF);
 	}
 error_not_ready:
 	mutex_unlock(&wimax_dev->mutex);
@@ -249,36 +245,31 @@ out_no_change:
  *
  * NOTE: This call will block until the operation is completed.
  */
-static
-int wimax_rfkill_toggle_radio(void *data, enum rfkill_state state)
+static int wimax_rfkill_set_radio_block(void *data, bool blocked)
 {
 	int result;
 	struct wimax_dev *wimax_dev = data;
 	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	enum wimax_rf_state rf_state;
 
-	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
-	switch (state) {
-	case RFKILL_STATE_ON:
+	d_fnstart(3, dev, "(wimax_dev %p blocked %u)\n", wimax_dev, blocked);
+	rf_state = WIMAX_RF_ON;
+	if (blocked)
 		rf_state = WIMAX_RF_OFF;
-		break;
-	case RFKILL_STATE_OFF:
-		rf_state = WIMAX_RF_ON;
-		break;
-	default:
-		BUG();
-	}
 	mutex_lock(&wimax_dev->mutex);
 	if (wimax_dev->state <= __WIMAX_ST_QUIESCING)
-		result = 0;	/* just pretend it didn't happen */
+		result = 0;
 	else
 		result = __wimax_rf_toggle_radio(wimax_dev, rf_state);
 	mutex_unlock(&wimax_dev->mutex);
-	d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
-		wimax_dev, state, result);
+	d_fnend(3, dev, "(wimax_dev %p blocked %u) = %d\n",
+		wimax_dev, blocked, result);
 	return result;
 }
 
+static const struct rfkill_ops wimax_rfkill_ops = {
+	.set_block = wimax_rfkill_set_radio_block,
+};
 
 /**
  * wimax_rfkill - Set the software RF switch state for a WiMAX device
@@ -322,6 +313,7 @@ int wimax_rfkill(struct wimax_dev *wimax_dev, enum wimax_rf_state state)
 		result = __wimax_rf_toggle_radio(wimax_dev, state);
 		if (result < 0)
 			goto error;
+		rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF);
 		break;
 	case WIMAX_RF_QUERY:
 		break;
@@ -349,41 +341,20 @@ int wimax_rfkill_add(struct wimax_dev *wimax_dev)
 {
 	int result;
 	struct rfkill *rfkill;
-	struct input_dev *input_dev;
 	struct device *dev = wimax_dev_to_dev(wimax_dev);
 
 	d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
 	/* Initialize RF Kill */
 	result = -ENOMEM;
-	rfkill = rfkill_allocate(dev, RFKILL_TYPE_WIMAX);
+	rfkill = rfkill_alloc(wimax_dev->name, dev, RFKILL_TYPE_WIMAX,
+			      &wimax_rfkill_ops, wimax_dev);
 	if (rfkill == NULL)
 		goto error_rfkill_allocate;
+
+	d_printf(1, dev, "rfkill %p\n", rfkill);
+
 	wimax_dev->rfkill = rfkill;
 
-	rfkill->name = wimax_dev->name;
-	rfkill->state = RFKILL_STATE_OFF;
-	rfkill->data = wimax_dev;
-	rfkill->toggle_radio = wimax_rfkill_toggle_radio;
-	rfkill->user_claim_unsupported = 1;
-
-	/* Initialize the input device for the hw key */
-	input_dev = input_allocate_device();
-	if (input_dev == NULL)
-		goto error_input_allocate;
-	wimax_dev->rfkill_input = input_dev;
-	d_printf(1, dev, "rfkill %p input %p\n", rfkill, input_dev);
-
-	input_dev->name = wimax_dev->name;
-	/* FIXME: get a real device bus ID and stuff? do we care? */
-	input_dev->id.bustype = BUS_HOST;
-	input_dev->id.vendor = 0xffff;
-	input_dev->evbit[0] = BIT(EV_KEY);
-	set_bit(KEY_WIMAX, input_dev->keybit);
-
-	/* Register both */
-	result = input_register_device(wimax_dev->rfkill_input);
-	if (result < 0)
-		goto error_input_register;
 	result = rfkill_register(wimax_dev->rfkill);
 	if (result < 0)
 		goto error_rfkill_register;
@@ -395,17 +366,8 @@ int wimax_rfkill_add(struct wimax_dev *wimax_dev)
 	d_fnend(3, dev, "(wimax_dev %p) = 0\n", wimax_dev);
 	return 0;
 
-	/* if rfkill_register() suceeds, can't use rfkill_free() any
-	 * more, only rfkill_unregister() [it owns the refcount]; with
-	 * the input device we have the same issue--hence the if. */
 error_rfkill_register:
-	input_unregister_device(wimax_dev->rfkill_input);
-	wimax_dev->rfkill_input = NULL;
-error_input_register:
-	if (wimax_dev->rfkill_input)
-		input_free_device(wimax_dev->rfkill_input);
-error_input_allocate:
-	rfkill_free(wimax_dev->rfkill);
+	rfkill_destroy(wimax_dev->rfkill);
 error_rfkill_allocate:
 	d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result);
 	return result;
@@ -424,45 +386,12 @@ void wimax_rfkill_rm(struct wimax_dev *wimax_dev)
 {
 	struct device *dev = wimax_dev_to_dev(wimax_dev);
 	d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
-	rfkill_unregister(wimax_dev->rfkill);	/* frees */
-	input_unregister_device(wimax_dev->rfkill_input);
+	rfkill_unregister(wimax_dev->rfkill);
+	rfkill_destroy(wimax_dev->rfkill);
 	d_fnend(3, dev, "(wimax_dev %p)\n", wimax_dev);
 }
 
 
-#else /* #ifdef CONFIG_RFKILL */
-
-void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
-			    enum wimax_rf_state state)
-{
-}
-EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
-
-void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev,
-			    enum wimax_rf_state state)
-{
-}
-EXPORT_SYMBOL_GPL(wimax_report_rfkill_sw);
-
-int wimax_rfkill(struct wimax_dev *wimax_dev,
-		 enum wimax_rf_state state)
-{
-	return WIMAX_RF_ON << 1 | WIMAX_RF_ON;
-}
-EXPORT_SYMBOL_GPL(wimax_rfkill);
-
-int wimax_rfkill_add(struct wimax_dev *wimax_dev)
-{
-	return 0;
-}
-
-void wimax_rfkill_rm(struct wimax_dev *wimax_dev)
-{
-}
-
-#endif /* #ifdef CONFIG_RFKILL */
-
-
 /*
  * Exporting to user space over generic netlink
  *
diff --git a/net/wimax/op-state-get.c b/net/wimax/op-state-get.c
new file mode 100644
index 00000000000..a76b8fcb056
--- /dev/null
+++ b/net/wimax/op-state-get.c
@@ -0,0 +1,86 @@
+/*
+ * Linux WiMAX
+ * Implement and export a method for getting a WiMAX device current state
+ *
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on previous WiMAX core work by:
+ *  Copyright (C) 2008 Intel Corporation <linux-wimax@intel.com>
+ *  Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <net/wimax.h>
+#include <net/genetlink.h>
+#include <linux/wimax.h>
+#include <linux/security.h>
+#include "wimax-internal.h"
+
+#define D_SUBMODULE op_state_get
+#include "debug-levels.h"
+
+
+static const
+struct nla_policy wimax_gnl_state_get_policy[WIMAX_GNL_ATTR_MAX + 1] = {
+	[WIMAX_GNL_STGET_IFIDX] = {
+		.type = NLA_U32,
+	},
+};
+
+
+/*
+ * Exporting to user space over generic netlink
+ *
+ * Parse the state get command from user space, return a combination
+ * value that describe the current state.
+ *
+ * No attributes.
+ */
+static
+int wimax_gnl_doit_state_get(struct sk_buff *skb, struct genl_info *info)
+{
+	int result, ifindex;
+	struct wimax_dev *wimax_dev;
+	struct device *dev;
+
+	d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
+	result = -ENODEV;
+	if (info->attrs[WIMAX_GNL_STGET_IFIDX] == NULL) {
+		printk(KERN_ERR "WIMAX_GNL_OP_STATE_GET: can't find IFIDX "
+			"attribute\n");
+		goto error_no_wimax_dev;
+	}
+	ifindex = nla_get_u32(info->attrs[WIMAX_GNL_STGET_IFIDX]);
+	wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
+	if (wimax_dev == NULL)
+		goto error_no_wimax_dev;
+	dev = wimax_dev_to_dev(wimax_dev);
+	/* Execute the operation and send the result back to user space */
+	result = wimax_state_get(wimax_dev);
+	dev_put(wimax_dev->net_dev);
+error_no_wimax_dev:
+	d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
+	return result;
+}
+
+
+struct genl_ops wimax_gnl_state_get = {
+	.cmd = WIMAX_GNL_OP_STATE_GET,
+	.flags = GENL_ADMIN_PERM,
+	.policy = wimax_gnl_state_get_policy,
+	.doit = wimax_gnl_doit_state_get,
+	.dumpit = NULL,
+};
diff --git a/net/wimax/stack.c b/net/wimax/stack.c
index 933e1422b09..79fb7d7c640 100644
--- a/net/wimax/stack.c
+++ b/net/wimax/stack.c
@@ -402,13 +402,15 @@ EXPORT_SYMBOL_GPL(wimax_dev_init);
 extern struct genl_ops
 	wimax_gnl_msg_from_user,
 	wimax_gnl_reset,
-	wimax_gnl_rfkill;
+	wimax_gnl_rfkill,
+	wimax_gnl_state_get;
 
 static
 struct genl_ops *wimax_gnl_ops[] = {
 	&wimax_gnl_msg_from_user,
 	&wimax_gnl_reset,
 	&wimax_gnl_rfkill,
+	&wimax_gnl_state_get,
 };
 
 
@@ -533,6 +535,7 @@ struct d_level D_LEVEL[] = {
 	D_SUBMODULE_DEFINE(op_msg),
 	D_SUBMODULE_DEFINE(op_reset),
 	D_SUBMODULE_DEFINE(op_rfkill),
+	D_SUBMODULE_DEFINE(op_state_get),
 	D_SUBMODULE_DEFINE(stack),
 };
 size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 3c3bc9e579e..4428dd5e911 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,5 +1,6 @@
 config CFG80211
-        tristate "Improved wireless configuration API"
+	tristate "Improved wireless configuration API"
+	depends on RFKILL || !RFKILL
 
 config CFG80211_REG_DEBUG
 	bool "cfg80211 regulatory debugging"
@@ -10,6 +11,14 @@ config CFG80211_REG_DEBUG
 
 	  If unsure, say N.
 
+config CFG80211_DEBUGFS
+	bool "cfg80211 DebugFS entries"
+	depends on CFG80211 && DEBUG_FS
+	---help---
+	  You can enable this if you want to debugfs entries for cfg80211.
+
+	  If unsure, say N.
+
 config WIRELESS_OLD_REGULATORY
 	bool "Old wireless static regulatory definitions"
 	default n
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index 6d1e7b27b75..f78c4832a9c 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -5,7 +5,8 @@ obj-$(CONFIG_LIB80211_CRYPT_WEP) += lib80211_crypt_wep.o
 obj-$(CONFIG_LIB80211_CRYPT_CCMP) += lib80211_crypt_ccmp.o
 obj-$(CONFIG_LIB80211_CRYPT_TKIP) += lib80211_crypt_tkip.o
 
-cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o mlme.o
+cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o mlme.o ibss.o
+cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
 cfg80211-$(CONFIG_WIRELESS_EXT) += wext-compat.o
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/net/wireless/core.c b/net/wireless/core.c
index d1f556535f6..d5850292b3d 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1,7 +1,7 @@
 /*
  * This is the linux wireless configuration interface.
  *
- * Copyright 2006-2008		Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2009		Johannes Berg <johannes@sipsolutions.net>
  */
 
 #include <linux/if.h>
@@ -12,12 +12,13 @@
 #include <linux/debugfs.h>
 #include <linux/notifier.h>
 #include <linux/device.h>
+#include <linux/rtnetlink.h>
 #include <net/genetlink.h>
 #include <net/cfg80211.h>
-#include <net/wireless.h>
 #include "nl80211.h"
 #include "core.h"
 #include "sysfs.h"
+#include "debugfs.h"
 
 /* name for sysfs, %d is appended */
 #define PHY_NAME "phy"
@@ -227,9 +228,44 @@ int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
 	return 0;
 }
 
+static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
+{
+	struct cfg80211_registered_device *drv = data;
+
+	drv->ops->rfkill_poll(&drv->wiphy);
+}
+
+static int cfg80211_rfkill_set_block(void *data, bool blocked)
+{
+	struct cfg80211_registered_device *drv = data;
+	struct wireless_dev *wdev;
+
+	if (!blocked)
+		return 0;
+
+	rtnl_lock();
+	mutex_lock(&drv->devlist_mtx);
+
+	list_for_each_entry(wdev, &drv->netdev_list, list)
+		dev_close(wdev->netdev);
+
+	mutex_unlock(&drv->devlist_mtx);
+	rtnl_unlock();
+
+	return 0;
+}
+
+static void cfg80211_rfkill_sync_work(struct work_struct *work)
+{
+	struct cfg80211_registered_device *drv;
+
+	drv = container_of(work, struct cfg80211_registered_device, rfkill_sync);
+	cfg80211_rfkill_set_block(drv, rfkill_blocked(drv->rfkill));
+}
+
 /* exported functions */
 
-struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv)
+struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 {
 	static int wiphy_counter;
 
@@ -274,6 +310,28 @@ struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv)
 	drv->wiphy.dev.class = &ieee80211_class;
 	drv->wiphy.dev.platform_data = drv;
 
+	drv->rfkill_ops.set_block = cfg80211_rfkill_set_block;
+	drv->rfkill = rfkill_alloc(dev_name(&drv->wiphy.dev),
+				   &drv->wiphy.dev, RFKILL_TYPE_WLAN,
+				   &drv->rfkill_ops, drv);
+
+	if (!drv->rfkill) {
+		kfree(drv);
+		return NULL;
+	}
+
+	INIT_WORK(&drv->rfkill_sync, cfg80211_rfkill_sync_work);
+
+	/*
+	 * Initialize wiphy parameters to IEEE 802.11 MIB default values.
+	 * Fragmentation and RTS threshold are disabled by default with the
+	 * special -1 value.
+	 */
+	drv->wiphy.retry_short = 7;
+	drv->wiphy.retry_long = 4;
+	drv->wiphy.frag_threshold = (u32) -1;
+	drv->wiphy.rts_threshold = (u32) -1;
+
 	return &drv->wiphy;
 }
 EXPORT_SYMBOL(wiphy_new);
@@ -337,17 +395,23 @@ int wiphy_register(struct wiphy *wiphy)
 	/* check and set up bitrates */
 	ieee80211_set_bitrate_flags(wiphy);
 
+	res = device_add(&drv->wiphy.dev);
+	if (res)
+		return res;
+
+	res = rfkill_register(drv->rfkill);
+	if (res)
+		goto out_rm_dev;
+
 	mutex_lock(&cfg80211_mutex);
 
 	/* set up regulatory info */
 	wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
 
-	res = device_add(&drv->wiphy.dev);
-	if (res)
-		goto out_unlock;
-
 	list_add(&drv->list, &cfg80211_drv_list);
 
+	mutex_unlock(&cfg80211_mutex);
+
 	/* add to debugfs */
 	drv->wiphy.debugfsdir =
 		debugfs_create_dir(wiphy_name(&drv->wiphy),
@@ -366,17 +430,41 @@ int wiphy_register(struct wiphy *wiphy)
 		nl80211_send_reg_change_event(&request);
 	}
 
-	res = 0;
-out_unlock:
-	mutex_unlock(&cfg80211_mutex);
+	cfg80211_debugfs_drv_add(drv);
+
+	return 0;
+
+ out_rm_dev:
+	device_del(&drv->wiphy.dev);
 	return res;
 }
 EXPORT_SYMBOL(wiphy_register);
 
+void wiphy_rfkill_start_polling(struct wiphy *wiphy)
+{
+	struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+
+	if (!drv->ops->rfkill_poll)
+		return;
+	drv->rfkill_ops.poll = cfg80211_rfkill_poll;
+	rfkill_resume_polling(drv->rfkill);
+}
+EXPORT_SYMBOL(wiphy_rfkill_start_polling);
+
+void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
+{
+	struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+
+	rfkill_pause_polling(drv->rfkill);
+}
+EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
+
 void wiphy_unregister(struct wiphy *wiphy)
 {
 	struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
 
+	rfkill_unregister(drv->rfkill);
+
 	/* protect the device list */
 	mutex_lock(&cfg80211_mutex);
 
@@ -396,6 +484,8 @@ void wiphy_unregister(struct wiphy *wiphy)
 	/* unlock again before freeing */
 	mutex_unlock(&drv->mtx);
 
+	cfg80211_debugfs_drv_del(drv);
+
 	/* If this device got a regulatory hint tell core its
 	 * free to listen now to a new shiny device regulatory hint */
 	reg_device_remove(wiphy);
@@ -411,6 +501,7 @@ EXPORT_SYMBOL(wiphy_unregister);
 void cfg80211_dev_free(struct cfg80211_registered_device *drv)
 {
 	struct cfg80211_internal_bss *scan, *tmp;
+	rfkill_destroy(drv->rfkill);
 	mutex_destroy(&drv->mtx);
 	mutex_destroy(&drv->devlist_mtx);
 	list_for_each_entry_safe(scan, tmp, &drv->bss_list, list)
@@ -424,6 +515,15 @@ void wiphy_free(struct wiphy *wiphy)
 }
 EXPORT_SYMBOL(wiphy_free);
 
+void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
+{
+	struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+
+	if (rfkill_set_hw_state(drv->rfkill, blocked))
+		schedule_work(&drv->rfkill_sync);
+}
+EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
+
 static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 					 unsigned long state,
 					 void *ndev)
@@ -432,7 +532,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 	struct cfg80211_registered_device *rdev;
 
 	if (!dev->ieee80211_ptr)
-		return 0;
+		return NOTIFY_DONE;
 
 	rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
 
@@ -448,8 +548,28 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 				"symlink to netdev!\n");
 		}
 		dev->ieee80211_ptr->netdev = dev;
+#ifdef CONFIG_WIRELESS_EXT
+		dev->ieee80211_ptr->wext.default_key = -1;
+		dev->ieee80211_ptr->wext.default_mgmt_key = -1;
+#endif
 		mutex_unlock(&rdev->devlist_mtx);
 		break;
+	case NETDEV_GOING_DOWN:
+		if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
+			break;
+		if (!dev->ieee80211_ptr->ssid_len)
+			break;
+		cfg80211_leave_ibss(rdev, dev, true);
+		break;
+	case NETDEV_UP:
+#ifdef CONFIG_WIRELESS_EXT
+		if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
+			break;
+		if (!dev->ieee80211_ptr->wext.ibss.ssid_len)
+			break;
+		cfg80211_join_ibss(rdev, dev, &dev->ieee80211_ptr->wext.ibss);
+		break;
+#endif
 	case NETDEV_UNREGISTER:
 		mutex_lock(&rdev->devlist_mtx);
 		if (!list_empty(&dev->ieee80211_ptr->list)) {
@@ -458,9 +578,13 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 		}
 		mutex_unlock(&rdev->devlist_mtx);
 		break;
+	case NETDEV_PRE_UP:
+		if (rfkill_blocked(rdev->rfkill))
+			return notifier_from_errno(-ERFKILL);
+		break;
 	}
 
-	return 0;
+	return NOTIFY_DONE;
 }
 
 static struct notifier_block cfg80211_netdev_notifier = {
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 0a592e4295f..bfa340c7abb 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -1,7 +1,7 @@
 /*
  * Wireless configuration interface internals.
  *
- * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2009	Johannes Berg <johannes@sipsolutions.net>
  */
 #ifndef __NET_WIRELESS_CORE_H
 #define __NET_WIRELESS_CORE_H
@@ -10,14 +10,15 @@
 #include <linux/netdevice.h>
 #include <linux/kref.h>
 #include <linux/rbtree.h>
-#include <linux/mutex.h>
+#include <linux/debugfs.h>
+#include <linux/rfkill.h>
+#include <linux/workqueue.h>
 #include <net/genetlink.h>
-#include <net/wireless.h>
 #include <net/cfg80211.h>
 #include "reg.h"
 
 struct cfg80211_registered_device {
-	struct cfg80211_ops *ops;
+	const struct cfg80211_ops *ops;
 	struct list_head list;
 	/* we hold this mutex during any call so that
 	 * we cannot do multiple calls at once, and also
@@ -25,6 +26,11 @@ struct cfg80211_registered_device {
 	 * any call is in progress */
 	struct mutex mtx;
 
+	/* rfkill support */
+	struct rfkill_ops rfkill_ops;
+	struct rfkill *rfkill;
+	struct work_struct rfkill_sync;
+
 	/* ISO / IEC 3166 alpha2 for which this device is receiving
 	 * country IEs on, this can help disregard country IEs from APs
 	 * on the same alpha2 quickly. The alpha2 may differ from
@@ -52,6 +58,17 @@ struct cfg80211_registered_device {
 	struct cfg80211_scan_request *scan_req; /* protected by RTNL */
 	unsigned long suspend_at;
 
+#ifdef CONFIG_CFG80211_DEBUGFS
+	/* Debugfs entries */
+	struct wiphy_debugfsdentries {
+		struct dentry *rts_threshold;
+		struct dentry *fragmentation_threshold;
+		struct dentry *short_retry_limit;
+		struct dentry *long_retry_limit;
+		struct dentry *ht40allow_map;
+	} debugfs;
+#endif
+
 	/* must be last because of the way we do wiphy_priv(),
 	 * and it should at least be aligned to NETDEV_ALIGN */
 	struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -74,10 +91,7 @@ bool wiphy_idx_valid(int wiphy_idx)
 extern struct mutex cfg80211_mutex;
 extern struct list_head cfg80211_drv_list;
 
-static inline void assert_cfg80211_lock(void)
-{
-	WARN_ON(!mutex_is_locked(&cfg80211_mutex));
-}
+#define assert_cfg80211_lock() WARN_ON(!mutex_is_locked(&cfg80211_mutex))
 
 /*
  * You can use this to mark a wiphy_idx as not having an associated wiphy.
@@ -148,4 +162,16 @@ void cfg80211_bss_expire(struct cfg80211_registered_device *dev);
 void cfg80211_bss_age(struct cfg80211_registered_device *dev,
                       unsigned long age_secs);
 
+/* IBSS */
+int cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev,
+		       struct cfg80211_ibss_params *params);
+void cfg80211_clear_ibss(struct net_device *dev, bool nowext);
+int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
+			struct net_device *dev, bool nowext);
+
+/* internal helpers */
+int cfg80211_validate_key_settings(struct key_params *params, int key_idx,
+				   const u8 *mac_addr);
+
 #endif /* __NET_WIRELESS_CORE_H */
diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c
new file mode 100644
index 00000000000..679ddfcec1e
--- /dev/null
+++ b/net/wireless/debugfs.c
@@ -0,0 +1,131 @@
+/*
+ * cfg80211 debugfs
+ *
+ * Copyright 2009	Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "core.h"
+#include "debugfs.h"
+
+static int cfg80211_open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...)		\
+static ssize_t name## _read(struct file *file, char __user *userbuf,	\
+			    size_t count, loff_t *ppos)			\
+{									\
+	struct wiphy *wiphy= file->private_data;		\
+	char buf[buflen];						\
+	int res;							\
+									\
+	res = scnprintf(buf, buflen, fmt "\n", ##value);		\
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+}									\
+									\
+static const struct file_operations name## _ops = {			\
+	.read = name## _read,						\
+	.open = cfg80211_open_file_generic,				\
+};
+
+DEBUGFS_READONLY_FILE(rts_threshold, 20, "%d",
+		      wiphy->rts_threshold)
+DEBUGFS_READONLY_FILE(fragmentation_threshold, 20, "%d",
+		      wiphy->frag_threshold);
+DEBUGFS_READONLY_FILE(short_retry_limit, 20, "%d",
+		      wiphy->retry_short)
+DEBUGFS_READONLY_FILE(long_retry_limit, 20, "%d",
+		      wiphy->retry_long);
+
+static int ht_print_chan(struct ieee80211_channel *chan,
+			 char *buf, int buf_size, int offset)
+{
+	if (WARN_ON(offset > buf_size))
+		return 0;
+
+	if (chan->flags & IEEE80211_CHAN_DISABLED)
+		return snprintf(buf + offset,
+				buf_size - offset,
+				"%d Disabled\n",
+				chan->center_freq);
+
+	return snprintf(buf + offset,
+			buf_size - offset,
+			"%d HT40 %c%c\n",
+			chan->center_freq,
+			(chan->flags & IEEE80211_CHAN_NO_HT40MINUS) ? ' ' : '-',
+			(chan->flags & IEEE80211_CHAN_NO_HT40PLUS)  ? ' ' : '+');
+}
+
+static ssize_t ht40allow_map_read(struct file *file,
+				  char __user *user_buf,
+				  size_t count, loff_t *ppos)
+{
+	struct wiphy *wiphy = file->private_data;
+	char *buf;
+	unsigned int offset = 0, buf_size = PAGE_SIZE, i, r;
+	enum ieee80211_band band;
+	struct ieee80211_supported_band *sband;
+
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	mutex_lock(&cfg80211_mutex);
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		sband = wiphy->bands[band];
+		if (!sband)
+			continue;
+		for (i = 0; i < sband->n_channels; i++)
+			offset += ht_print_chan(&sband->channels[i],
+						buf, buf_size, offset);
+	}
+
+	mutex_unlock(&cfg80211_mutex);
+
+	r = simple_read_from_buffer(user_buf, count, ppos, buf, offset);
+
+	kfree(buf);
+
+	return r;
+}
+
+static const struct file_operations ht40allow_map_ops = {
+	.read = ht40allow_map_read,
+	.open = cfg80211_open_file_generic,
+};
+
+#define DEBUGFS_ADD(name)						\
+	drv->debugfs.name = debugfs_create_file(#name, S_IRUGO, phyd,	\
+						  &drv->wiphy, &name## _ops);
+#define DEBUGFS_DEL(name)						\
+	debugfs_remove(drv->debugfs.name);				\
+	drv->debugfs.name = NULL;
+
+void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv)
+{
+	struct dentry *phyd = drv->wiphy.debugfsdir;
+
+	DEBUGFS_ADD(rts_threshold);
+	DEBUGFS_ADD(fragmentation_threshold);
+	DEBUGFS_ADD(short_retry_limit);
+	DEBUGFS_ADD(long_retry_limit);
+	DEBUGFS_ADD(ht40allow_map);
+}
+
+void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv)
+{
+	DEBUGFS_DEL(rts_threshold);
+	DEBUGFS_DEL(fragmentation_threshold);
+	DEBUGFS_DEL(short_retry_limit);
+	DEBUGFS_DEL(long_retry_limit);
+	DEBUGFS_DEL(ht40allow_map);
+}
diff --git a/net/wireless/debugfs.h b/net/wireless/debugfs.h
new file mode 100644
index 00000000000..c226983ae66
--- /dev/null
+++ b/net/wireless/debugfs.h
@@ -0,0 +1,14 @@
+#ifndef __CFG80211_DEBUGFS_H
+#define __CFG80211_DEBUGFS_H
+
+#ifdef CONFIG_CFG80211_DEBUGFS
+void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv);
+void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv);
+#else
+static inline
+void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv) {}
+static inline
+void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv) {}
+#endif
+
+#endif /* __CFG80211_DEBUGFS_H */
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
new file mode 100644
index 00000000000..a4a1c3498ff
--- /dev/null
+++ b/net/wireless/ibss.c
@@ -0,0 +1,369 @@
+/*
+ * Some IBSS support code for cfg80211.
+ *
+ * Copyright 2009	Johannes Berg <johannes@sipsolutions.net>
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+
+
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_bss *bss;
+#ifdef CONFIG_WIRELESS_EXT
+	union iwreq_data wrqu;
+#endif
+
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return;
+
+	if (WARN_ON(!wdev->ssid_len))
+		return;
+
+	if (memcmp(bssid, wdev->bssid, ETH_ALEN) == 0)
+		return;
+
+	bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
+			       wdev->ssid, wdev->ssid_len,
+			       WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+
+	if (WARN_ON(!bss))
+		return;
+
+	if (wdev->current_bss) {
+		cfg80211_unhold_bss(wdev->current_bss);
+		cfg80211_put_bss(wdev->current_bss);
+	}
+
+	cfg80211_hold_bss(bss);
+	wdev->current_bss = bss;
+	memcpy(wdev->bssid, bssid, ETH_ALEN);
+
+	nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid, gfp);
+#ifdef CONFIG_WIRELESS_EXT
+	memset(&wrqu, 0, sizeof(wrqu));
+	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
+	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+#endif
+}
+EXPORT_SYMBOL(cfg80211_ibss_joined);
+
+int cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev,
+		       struct cfg80211_ibss_params *params)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	if (wdev->ssid_len)
+		return -EALREADY;
+
+#ifdef CONFIG_WIRELESS_EXT
+	wdev->wext.ibss.channel = params->channel;
+#endif
+	err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
+
+	if (err)
+		return err;
+
+	memcpy(wdev->ssid, params->ssid, params->ssid_len);
+	wdev->ssid_len = params->ssid_len;
+
+	return 0;
+}
+
+void cfg80211_clear_ibss(struct net_device *dev, bool nowext)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	if (wdev->current_bss) {
+		cfg80211_unhold_bss(wdev->current_bss);
+		cfg80211_put_bss(wdev->current_bss);
+	}
+
+	wdev->current_bss = NULL;
+	wdev->ssid_len = 0;
+	memset(wdev->bssid, 0, ETH_ALEN);
+#ifdef CONFIG_WIRELESS_EXT
+	if (!nowext)
+		wdev->wext.ibss.ssid_len = 0;
+#endif
+}
+
+int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
+			struct net_device *dev, bool nowext)
+{
+	int err;
+
+	err = rdev->ops->leave_ibss(&rdev->wiphy, dev);
+
+	if (err)
+		return err;
+
+	cfg80211_clear_ibss(dev, nowext);
+
+	return 0;
+}
+
+#ifdef CONFIG_WIRELESS_EXT
+static int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
+				   struct wireless_dev *wdev)
+{
+	enum ieee80211_band band;
+	int i;
+
+	if (!wdev->wext.ibss.beacon_interval)
+		wdev->wext.ibss.beacon_interval = 100;
+
+	/* try to find an IBSS channel if none requested ... */
+	if (!wdev->wext.ibss.channel) {
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+			struct ieee80211_supported_band *sband;
+			struct ieee80211_channel *chan;
+
+			sband = rdev->wiphy.bands[band];
+			if (!sband)
+				continue;
+
+			for (i = 0; i < sband->n_channels; i++) {
+				chan = &sband->channels[i];
+				if (chan->flags & IEEE80211_CHAN_NO_IBSS)
+					continue;
+				if (chan->flags & IEEE80211_CHAN_DISABLED)
+					continue;
+				wdev->wext.ibss.channel = chan;
+				break;
+			}
+
+			if (wdev->wext.ibss.channel)
+				break;
+		}
+
+		if (!wdev->wext.ibss.channel)
+			return -EINVAL;
+	}
+
+	/* don't join -- SSID is not there */
+	if (!wdev->wext.ibss.ssid_len)
+		return 0;
+
+	if (!netif_running(wdev->netdev))
+		return 0;
+
+	return cfg80211_join_ibss(wiphy_to_dev(wdev->wiphy),
+				  wdev->netdev, &wdev->wext.ibss);
+}
+
+int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_freq *freq, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct ieee80211_channel *chan;
+	int err;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+		return -EOPNOTSUPP;
+
+	chan = cfg80211_wext_freq(wdev->wiphy, freq);
+	if (chan && IS_ERR(chan))
+		return PTR_ERR(chan);
+
+	if (chan &&
+	    (chan->flags & IEEE80211_CHAN_NO_IBSS ||
+	     chan->flags & IEEE80211_CHAN_DISABLED))
+		return -EINVAL;
+
+	if (wdev->wext.ibss.channel == chan)
+		return 0;
+
+	if (wdev->ssid_len) {
+		err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
+					  dev, true);
+		if (err)
+			return err;
+	}
+
+	if (chan) {
+		wdev->wext.ibss.channel = chan;
+		wdev->wext.ibss.channel_fixed = true;
+	} else {
+		/* cfg80211_ibss_wext_join will pick one if needed */
+		wdev->wext.ibss.channel_fixed = false;
+	}
+
+	return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwfreq);
+
+int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_freq *freq, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct ieee80211_channel *chan = NULL;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	if (wdev->current_bss)
+		chan = wdev->current_bss->channel;
+	else if (wdev->wext.ibss.channel)
+		chan = wdev->wext.ibss.channel;
+
+	if (chan) {
+		freq->m = chan->center_freq;
+		freq->e = 6;
+		return 0;
+	}
+
+	/* no channel if not joining */
+	return -EINVAL;
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwfreq);
+
+int cfg80211_ibss_wext_siwessid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *ssid)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	size_t len = data->length;
+	int err;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+		return -EOPNOTSUPP;
+
+	if (wdev->ssid_len) {
+		err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
+					  dev, true);
+		if (err)
+			return err;
+	}
+
+	/* iwconfig uses nul termination in SSID.. */
+	if (len > 0 && ssid[len - 1] == '\0')
+		len--;
+
+	wdev->wext.ibss.ssid = wdev->ssid;
+	memcpy(wdev->wext.ibss.ssid, ssid, len);
+	wdev->wext.ibss.ssid_len = len;
+
+	return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwessid);
+
+int cfg80211_ibss_wext_giwessid(struct net_device *dev,
+				struct iw_request_info *info,
+				struct iw_point *data, char *ssid)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	data->flags = 0;
+
+	if (wdev->ssid_len) {
+		data->flags = 1;
+		data->length = wdev->ssid_len;
+		memcpy(ssid, wdev->ssid, data->length);
+	} else if (wdev->wext.ibss.ssid && wdev->wext.ibss.ssid_len) {
+		data->flags = 1;
+		data->length = wdev->wext.ibss.ssid_len;
+		memcpy(ssid, wdev->wext.ibss.ssid, data->length);
+	}
+
+	return 0;
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwessid);
+
+int cfg80211_ibss_wext_siwap(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct sockaddr *ap_addr, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	u8 *bssid = ap_addr->sa_data;
+	int err;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+		return -EOPNOTSUPP;
+
+	if (ap_addr->sa_family != ARPHRD_ETHER)
+		return -EINVAL;
+
+	/* automatic mode */
+	if (is_zero_ether_addr(bssid) || is_broadcast_ether_addr(bssid))
+		bssid = NULL;
+
+	/* both automatic */
+	if (!bssid && !wdev->wext.ibss.bssid)
+		return 0;
+
+	/* fixed already - and no change */
+	if (wdev->wext.ibss.bssid && bssid &&
+	    compare_ether_addr(bssid, wdev->wext.ibss.bssid) == 0)
+		return 0;
+
+	if (wdev->ssid_len) {
+		err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
+					  dev, true);
+		if (err)
+			return err;
+	}
+
+	if (bssid) {
+		memcpy(wdev->wext.bssid, bssid, ETH_ALEN);
+		wdev->wext.ibss.bssid = wdev->wext.bssid;
+	} else
+		wdev->wext.ibss.bssid = NULL;
+
+	return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwap);
+
+int cfg80211_ibss_wext_giwap(struct net_device *dev,
+			     struct iw_request_info *info,
+			     struct sockaddr *ap_addr, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	/* call only for ibss! */
+	if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
+		return -EINVAL;
+
+	ap_addr->sa_family = ARPHRD_ETHER;
+
+	if (wdev->wext.ibss.bssid) {
+		memcpy(ap_addr->sa_data, wdev->wext.ibss.bssid, ETH_ALEN);
+		return 0;
+	}
+
+	memcpy(ap_addr->sa_data, wdev->bssid, ETH_ALEN);
+	return 0;
+}
+/* temporary symbol - mark GPL - in the future the handler won't be */
+EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwap);
+#endif
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index bec5721b6f9..42184361a10 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -28,19 +28,55 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len)
 }
 EXPORT_SYMBOL(cfg80211_send_rx_assoc);
 
-void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf, size_t len)
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len)
 {
 	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
-	nl80211_send_rx_deauth(rdev, dev, buf, len);
+	nl80211_send_deauth(rdev, dev, buf, len);
 }
-EXPORT_SYMBOL(cfg80211_send_rx_deauth);
+EXPORT_SYMBOL(cfg80211_send_deauth);
 
-void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf,
-			       size_t len)
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len)
 {
 	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
-	nl80211_send_rx_disassoc(rdev, dev, buf, len);
+	nl80211_send_disassoc(rdev, dev, buf, len);
 }
-EXPORT_SYMBOL(cfg80211_send_rx_disassoc);
+EXPORT_SYMBOL(cfg80211_send_disassoc);
+
+static void cfg80211_wext_disconnected(struct net_device *dev)
+{
+#ifdef CONFIG_WIRELESS_EXT
+	union iwreq_data wrqu;
+	memset(&wrqu, 0, sizeof(wrqu));
+	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+#endif
+}
+
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr)
+{
+	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+	nl80211_send_auth_timeout(rdev, dev, addr);
+	cfg80211_wext_disconnected(dev);
+}
+EXPORT_SYMBOL(cfg80211_send_auth_timeout);
+
+void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr)
+{
+	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+	nl80211_send_assoc_timeout(rdev, dev, addr);
+	cfg80211_wext_disconnected(dev);
+}
+EXPORT_SYMBOL(cfg80211_send_assoc_timeout);
+
+void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
+				  enum nl80211_key_type key_type, int key_id,
+				  const u8 *tsc)
+{
+	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+	nl80211_michael_mic_failure(rdev, dev, addr, key_type, key_id, tsc);
+}
+EXPORT_SYMBOL(cfg80211_michael_mic_failure);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2456e4ee445..24168560eba 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1,7 +1,7 @@
 /*
  * This is the new netlink-based wireless configuration interface.
  *
- * Copyright 2006, 2007	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2009	Johannes Berg <johannes@sipsolutions.net>
  */
 
 #include <linux/if.h>
@@ -57,10 +57,14 @@ static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
 static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 	[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
 	[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
-				      .len = BUS_ID_SIZE-1 },
+				      .len = 20-1 },
 	[NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },
 	[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
 	[NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 },
+	[NL80211_ATTR_WIPHY_RETRY_SHORT] = { .type = NLA_U8 },
+	[NL80211_ATTR_WIPHY_RETRY_LONG] = { .type = NLA_U8 },
+	[NL80211_ATTR_WIPHY_FRAG_THRESHOLD] = { .type = NLA_U32 },
+	[NL80211_ATTR_WIPHY_RTS_THRESHOLD] = { .type = NLA_U32 },
 
 	[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
 	[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
@@ -73,6 +77,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 	[NL80211_ATTR_KEY_IDX] = { .type = NLA_U8 },
 	[NL80211_ATTR_KEY_CIPHER] = { .type = NLA_U32 },
 	[NL80211_ATTR_KEY_DEFAULT] = { .type = NLA_FLAG },
+	[NL80211_ATTR_KEY_SEQ] = { .type = NLA_BINARY, .len = 8 },
 
 	[NL80211_ATTR_BEACON_INTERVAL] = { .type = NLA_U32 },
 	[NL80211_ATTR_DTIM_PERIOD] = { .type = NLA_U32 },
@@ -116,8 +121,45 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
 				.len = IEEE80211_MAX_SSID_LEN },
 	[NL80211_ATTR_AUTH_TYPE] = { .type = NLA_U32 },
 	[NL80211_ATTR_REASON_CODE] = { .type = NLA_U16 },
+	[NL80211_ATTR_FREQ_FIXED] = { .type = NLA_FLAG },
+	[NL80211_ATTR_TIMED_OUT] = { .type = NLA_FLAG },
+	[NL80211_ATTR_USE_MFP] = { .type = NLA_U32 },
+	[NL80211_ATTR_STA_FLAGS2] = {
+		.len = sizeof(struct nl80211_sta_flag_update),
+	},
+	[NL80211_ATTR_CONTROL_PORT] = { .type = NLA_FLAG },
 };
 
+/* IE validation */
+static bool is_valid_ie_attr(const struct nlattr *attr)
+{
+	const u8 *pos;
+	int len;
+
+	if (!attr)
+		return true;
+
+	pos = nla_data(attr);
+	len = nla_len(attr);
+
+	while (len) {
+		u8 elemlen;
+
+		if (len < 2)
+			return false;
+		len -= 2;
+
+		elemlen = pos[1];
+		if (elemlen > len)
+			return false;
+
+		len -= elemlen;
+		pos += 2 + elemlen;
+	}
+
+	return true;
+}
+
 /* message building helper */
 static inline void *nl80211hdr_put(struct sk_buff *skb, u32 pid, u32 seq,
 				   int flags, u8 cmd)
@@ -126,6 +168,30 @@ static inline void *nl80211hdr_put(struct sk_buff *skb, u32 pid, u32 seq,
 	return genlmsg_put(skb, pid, seq, &nl80211_fam, flags, cmd);
 }
 
+static int nl80211_msg_put_channel(struct sk_buff *msg,
+				   struct ieee80211_channel *chan)
+{
+	NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_FREQ,
+		    chan->center_freq);
+
+	if (chan->flags & IEEE80211_CHAN_DISABLED)
+		NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_DISABLED);
+	if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+		NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_PASSIVE_SCAN);
+	if (chan->flags & IEEE80211_CHAN_NO_IBSS)
+		NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_NO_IBSS);
+	if (chan->flags & IEEE80211_CHAN_RADAR)
+		NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_RADAR);
+
+	NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+		    DBM_TO_MBM(chan->max_power));
+
+	return 0;
+
+ nla_put_failure:
+	return -ENOBUFS;
+}
+
 /* netlink command implementations */
 
 static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
@@ -149,8 +215,24 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, dev->wiphy_idx);
 	NLA_PUT_STRING(msg, NL80211_ATTR_WIPHY_NAME, wiphy_name(&dev->wiphy));
+
+	NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_RETRY_SHORT,
+		   dev->wiphy.retry_short);
+	NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_RETRY_LONG,
+		   dev->wiphy.retry_long);
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+		    dev->wiphy.frag_threshold);
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+		    dev->wiphy.rts_threshold);
+
 	NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
 		   dev->wiphy.max_scan_ssids);
+	NLA_PUT_U16(msg, NL80211_ATTR_MAX_SCAN_IE_LEN,
+		    dev->wiphy.max_scan_ie_len);
+
+	NLA_PUT(msg, NL80211_ATTR_CIPHER_SUITES,
+		sizeof(u32) * dev->wiphy.n_cipher_suites,
+		dev->wiphy.cipher_suites);
 
 	nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
 	if (!nl_modes)
@@ -202,20 +284,9 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 				goto nla_put_failure;
 
 			chan = &dev->wiphy.bands[band]->channels[i];
-			NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_FREQ,
-				    chan->center_freq);
-
-			if (chan->flags & IEEE80211_CHAN_DISABLED)
-				NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_DISABLED);
-			if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
-				NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_PASSIVE_SCAN);
-			if (chan->flags & IEEE80211_CHAN_NO_IBSS)
-				NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_NO_IBSS);
-			if (chan->flags & IEEE80211_CHAN_RADAR)
-				NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_RADAR);
 
-			NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-				    DBM_TO_MBM(chan->max_power));
+			if (nl80211_msg_put_channel(msg, chan))
+				goto nla_put_failure;
 
 			nla_nest_end(msg, nl_freq);
 		}
@@ -273,6 +344,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	CMD(assoc, ASSOCIATE);
 	CMD(deauth, DEAUTHENTICATE);
 	CMD(disassoc, DISASSOCIATE);
+	CMD(join_ibss, JOIN_IBSS);
 
 #undef CMD
 	nla_nest_end(msg, nl_cmds);
@@ -317,7 +389,7 @@ static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info)
 	if (IS_ERR(dev))
 		return PTR_ERR(dev);
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		goto out_err;
 
@@ -365,6 +437,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	struct cfg80211_registered_device *rdev;
 	int result = 0, rem_txq_params = 0;
 	struct nlattr *nl_txq_params;
+	u32 changed;
+	u8 retry_short = 0, retry_long = 0;
+	u32 frag_threshold = 0, rts_threshold = 0;
 
 	rtnl_lock();
 
@@ -418,7 +493,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
 		struct ieee80211_channel *chan;
 		struct ieee80211_sta_ht_cap *ht_cap;
-		u32 freq, sec_freq;
+		u32 freq;
 
 		if (!rdev->ops->set_channel) {
 			result = -EOPNOTSUPP;
@@ -444,33 +519,28 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
 			goto bad_res;
 
-		if (channel_type == NL80211_CHAN_HT40MINUS)
-			sec_freq = freq - 20;
-		else if (channel_type == NL80211_CHAN_HT40PLUS)
-			sec_freq = freq + 20;
-		else
-			sec_freq = 0;
-
-		ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
-
-		/* no HT capabilities */
-		if (channel_type != NL80211_CHAN_NO_HT &&
-		    !ht_cap->ht_supported)
+		if (channel_type == NL80211_CHAN_HT40MINUS &&
+		    (chan->flags & IEEE80211_CHAN_NO_HT40MINUS))
+			goto bad_res;
+		else if (channel_type == NL80211_CHAN_HT40PLUS &&
+			 (chan->flags & IEEE80211_CHAN_NO_HT40PLUS))
 			goto bad_res;
 
-		if (sec_freq) {
-			struct ieee80211_channel *schan;
+		/*
+		 * At this point we know if that if HT40 was requested
+		 * we are allowed to use it and the extension channel
+		 * exists.
+		 */
 
-			/* no 40 MHz capabilities */
+		ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
+
+		/* no HT capabilities or intolerant */
+		if (channel_type != NL80211_CHAN_NO_HT) {
+			if (!ht_cap->ht_supported)
+				goto bad_res;
 			if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
 			    (ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT))
 				goto bad_res;
-
-			schan = ieee80211_get_channel(&rdev->wiphy, sec_freq);
-
-			/* Secondary channel not allowed */
-			if (!schan || schan->flags & IEEE80211_CHAN_DISABLED)
-				goto bad_res;
 		}
 
 		result = rdev->ops->set_channel(&rdev->wiphy, chan,
@@ -479,6 +549,84 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 			goto bad_res;
 	}
 
+	changed = 0;
+
+	if (info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]) {
+		retry_short = nla_get_u8(
+			info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]);
+		if (retry_short == 0) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+		changed |= WIPHY_PARAM_RETRY_SHORT;
+	}
+
+	if (info->attrs[NL80211_ATTR_WIPHY_RETRY_LONG]) {
+		retry_long = nla_get_u8(
+			info->attrs[NL80211_ATTR_WIPHY_RETRY_LONG]);
+		if (retry_long == 0) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+		changed |= WIPHY_PARAM_RETRY_LONG;
+	}
+
+	if (info->attrs[NL80211_ATTR_WIPHY_FRAG_THRESHOLD]) {
+		frag_threshold = nla_get_u32(
+			info->attrs[NL80211_ATTR_WIPHY_FRAG_THRESHOLD]);
+		if (frag_threshold < 256) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+		if (frag_threshold != (u32) -1) {
+			/*
+			 * Fragments (apart from the last one) are required to
+			 * have even length. Make the fragmentation code
+			 * simpler by stripping LSB should someone try to use
+			 * odd threshold value.
+			 */
+			frag_threshold &= ~0x1;
+		}
+		changed |= WIPHY_PARAM_FRAG_THRESHOLD;
+	}
+
+	if (info->attrs[NL80211_ATTR_WIPHY_RTS_THRESHOLD]) {
+		rts_threshold = nla_get_u32(
+			info->attrs[NL80211_ATTR_WIPHY_RTS_THRESHOLD]);
+		changed |= WIPHY_PARAM_RTS_THRESHOLD;
+	}
+
+	if (changed) {
+		u8 old_retry_short, old_retry_long;
+		u32 old_frag_threshold, old_rts_threshold;
+
+		if (!rdev->ops->set_wiphy_params) {
+			result = -EOPNOTSUPP;
+			goto bad_res;
+		}
+
+		old_retry_short = rdev->wiphy.retry_short;
+		old_retry_long = rdev->wiphy.retry_long;
+		old_frag_threshold = rdev->wiphy.frag_threshold;
+		old_rts_threshold = rdev->wiphy.rts_threshold;
+
+		if (changed & WIPHY_PARAM_RETRY_SHORT)
+			rdev->wiphy.retry_short = retry_short;
+		if (changed & WIPHY_PARAM_RETRY_LONG)
+			rdev->wiphy.retry_long = retry_long;
+		if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
+			rdev->wiphy.frag_threshold = frag_threshold;
+		if (changed & WIPHY_PARAM_RTS_THRESHOLD)
+			rdev->wiphy.rts_threshold = rts_threshold;
+
+		result = rdev->ops->set_wiphy_params(&rdev->wiphy, changed);
+		if (result) {
+			rdev->wiphy.retry_short = old_retry_short;
+			rdev->wiphy.retry_long = old_retry_long;
+			rdev->wiphy.frag_threshold = old_frag_threshold;
+			rdev->wiphy.rts_threshold = old_rts_threshold;
+		}
+	}
 
  bad_res:
 	mutex_unlock(&rdev->mtx);
@@ -489,6 +637,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 
 
 static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags,
+			      struct cfg80211_registered_device *rdev,
 			      struct net_device *dev)
 {
 	void *hdr;
@@ -498,6 +647,7 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		return -1;
 
 	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
 	NLA_PUT_STRING(msg, NL80211_ATTR_IFNAME, dev->name);
 	NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, dev->ieee80211_ptr->iftype);
 	return genlmsg_end(msg, hdr);
@@ -532,7 +682,7 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *
 			}
 			if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
 					       cb->nlh->nlmsg_seq, NLM_F_MULTI,
-					       wdev->netdev) < 0) {
+					       dev, wdev->netdev) < 0) {
 				mutex_unlock(&dev->devlist_mtx);
 				goto out;
 			}
@@ -562,11 +712,12 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		return err;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		goto out_err;
 
-	if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0, netdev) < 0)
+	if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0,
+			       dev, netdev) < 0)
 		goto out_free;
 
 	dev_put(netdev);
@@ -616,7 +767,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	struct cfg80211_registered_device *drv;
 	struct vif_params params;
 	int err, ifindex;
-	enum nl80211_iftype type;
+	enum nl80211_iftype otype, ntype;
 	struct net_device *dev;
 	u32 _flags, *flags = NULL;
 	bool change = false;
@@ -630,30 +781,27 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 		goto unlock_rtnl;
 
 	ifindex = dev->ifindex;
-	type = dev->ieee80211_ptr->iftype;
+	otype = ntype = dev->ieee80211_ptr->iftype;
 	dev_put(dev);
 
 	if (info->attrs[NL80211_ATTR_IFTYPE]) {
-		enum nl80211_iftype ntype;
-
 		ntype = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
-		if (type != ntype)
+		if (otype != ntype)
 			change = true;
-		type = ntype;
-		if (type > NL80211_IFTYPE_MAX) {
+		if (ntype > NL80211_IFTYPE_MAX) {
 			err = -EINVAL;
 			goto unlock;
 		}
 	}
 
 	if (!drv->ops->change_virtual_intf ||
-	    !(drv->wiphy.interface_modes & (1 << type))) {
+	    !(drv->wiphy.interface_modes & (1 << ntype))) {
 		err = -EOPNOTSUPP;
 		goto unlock;
 	}
 
 	if (info->attrs[NL80211_ATTR_MESH_ID]) {
-		if (type != NL80211_IFTYPE_MESH_POINT) {
+		if (ntype != NL80211_IFTYPE_MESH_POINT) {
 			err = -EINVAL;
 			goto unlock;
 		}
@@ -663,7 +811,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (info->attrs[NL80211_ATTR_MNTR_FLAGS]) {
-		if (type != NL80211_IFTYPE_MONITOR) {
+		if (ntype != NL80211_IFTYPE_MONITOR) {
 			err = -EINVAL;
 			goto unlock;
 		}
@@ -678,12 +826,17 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 
 	if (change)
 		err = drv->ops->change_virtual_intf(&drv->wiphy, ifindex,
-						    type, flags, &params);
+						    ntype, flags, &params);
 	else
 		err = 0;
 
 	dev = __dev_get_by_index(&init_net, ifindex);
-	WARN_ON(!dev || (!err && dev->ieee80211_ptr->iftype != type));
+	WARN_ON(!dev || (!err && dev->ieee80211_ptr->iftype != ntype));
+
+	if (dev && !err && (ntype != otype)) {
+		if (otype == NL80211_IFTYPE_ADHOC)
+			cfg80211_clear_ibss(dev, false);
+	}
 
  unlock:
 	cfg80211_put_dev(drv);
@@ -832,7 +985,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		err = -ENOMEM;
 		goto out;
@@ -920,6 +1073,14 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	err = func(&drv->wiphy, dev, key_idx);
+#ifdef CONFIG_WIRELESS_EXT
+	if (!err) {
+		if (func == drv->ops->set_default_key)
+			dev->ieee80211_ptr->wext.default_key = key_idx;
+		else
+			dev->ieee80211_ptr->wext.default_mgmt_key = key_idx;
+	}
+#endif
 
  out:
 	cfg80211_put_dev(drv);
@@ -934,7 +1095,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *drv;
-	int err;
+	int err, i;
 	struct net_device *dev;
 	struct key_params params;
 	u8 key_idx = 0;
@@ -950,6 +1111,11 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 		params.key_len = nla_len(info->attrs[NL80211_ATTR_KEY_DATA]);
 	}
 
+	if (info->attrs[NL80211_ATTR_KEY_SEQ]) {
+		params.seq = nla_data(info->attrs[NL80211_ATTR_KEY_SEQ]);
+		params.seq_len = nla_len(info->attrs[NL80211_ATTR_KEY_SEQ]);
+	}
+
 	if (info->attrs[NL80211_ATTR_KEY_IDX])
 		key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
 
@@ -958,44 +1124,8 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	if (key_idx > 5)
-		return -EINVAL;
-
-	/*
-	 * Disallow pairwise keys with non-zero index unless it's WEP
-	 * (because current deployments use pairwise WEP keys with
-	 * non-zero indizes but 802.11i clearly specifies to use zero)
-	 */
-	if (mac_addr && key_idx &&
-	    params.cipher != WLAN_CIPHER_SUITE_WEP40 &&
-	    params.cipher != WLAN_CIPHER_SUITE_WEP104)
-		return -EINVAL;
-
-	/* TODO: add definitions for the lengths to linux/ieee80211.h */
-	switch (params.cipher) {
-	case WLAN_CIPHER_SUITE_WEP40:
-		if (params.key_len != 5)
-			return -EINVAL;
-		break;
-	case WLAN_CIPHER_SUITE_TKIP:
-		if (params.key_len != 32)
-			return -EINVAL;
-		break;
-	case WLAN_CIPHER_SUITE_CCMP:
-		if (params.key_len != 16)
-			return -EINVAL;
-		break;
-	case WLAN_CIPHER_SUITE_WEP104:
-		if (params.key_len != 13)
-			return -EINVAL;
-		break;
-	case WLAN_CIPHER_SUITE_AES_CMAC:
-		if (params.key_len != 16)
-			return -EINVAL;
-		break;
-	default:
+	if (cfg80211_validate_key_settings(&params, key_idx, mac_addr))
 		return -EINVAL;
-	}
 
 	rtnl_lock();
 
@@ -1003,6 +1133,14 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto unlock_rtnl;
 
+	for (i = 0; i < drv->wiphy.n_cipher_suites; i++)
+		if (params.cipher == drv->wiphy.cipher_suites[i])
+			break;
+	if (i == drv->wiphy.n_cipher_suites) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	if (!drv->ops->add_key) {
 		err = -EOPNOTSUPP;
 		goto out;
@@ -1049,6 +1187,15 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
 
 	err = drv->ops->del_key(&drv->wiphy, dev, key_idx, mac_addr);
 
+#ifdef CONFIG_WIRELESS_EXT
+	if (!err) {
+		if (key_idx == dev->ieee80211_ptr->wext.default_key)
+			dev->ieee80211_ptr->wext.default_key = -1;
+		else if (key_idx == dev->ieee80211_ptr->wext.default_mgmt_key)
+			dev->ieee80211_ptr->wext.default_mgmt_key = -1;
+	}
+#endif
+
  out:
 	cfg80211_put_dev(drv);
 	dev_put(dev);
@@ -1069,6 +1216,9 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 	struct beacon_parameters params;
 	int haveinfo = 0;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_BEACON_TAIL]))
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -1186,15 +1336,36 @@ static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
 	[NL80211_STA_FLAG_AUTHORIZED] = { .type = NLA_FLAG },
 	[NL80211_STA_FLAG_SHORT_PREAMBLE] = { .type = NLA_FLAG },
 	[NL80211_STA_FLAG_WME] = { .type = NLA_FLAG },
+	[NL80211_STA_FLAG_MFP] = { .type = NLA_FLAG },
 };
 
-static int parse_station_flags(struct nlattr *nla, u32 *staflags)
+static int parse_station_flags(struct genl_info *info,
+			       struct station_parameters *params)
 {
 	struct nlattr *flags[NL80211_STA_FLAG_MAX + 1];
+	struct nlattr *nla;
 	int flag;
 
-	*staflags = 0;
+	/*
+	 * Try parsing the new attribute first so userspace
+	 * can specify both for older kernels.
+	 */
+	nla = info->attrs[NL80211_ATTR_STA_FLAGS2];
+	if (nla) {
+		struct nl80211_sta_flag_update *sta_flags;
+
+		sta_flags = nla_data(nla);
+		params->sta_flags_mask = sta_flags->mask;
+		params->sta_flags_set = sta_flags->set;
+		if ((params->sta_flags_mask |
+		     params->sta_flags_set) & BIT(__NL80211_STA_FLAG_INVALID))
+			return -EINVAL;
+		return 0;
+	}
+
+	/* if present, parse the old attribute */
 
+	nla = info->attrs[NL80211_ATTR_STA_FLAGS];
 	if (!nla)
 		return 0;
 
@@ -1202,11 +1373,12 @@ static int parse_station_flags(struct nlattr *nla, u32 *staflags)
 			     nla, sta_flags_policy))
 		return -EINVAL;
 
-	*staflags = STATION_FLAG_CHANGED;
+	params->sta_flags_mask = (1 << __NL80211_STA_FLAG_AFTER_LAST) - 1;
+	params->sta_flags_mask &= ~1;
 
 	for (flag = 1; flag <= NL80211_STA_FLAG_MAX; flag++)
 		if (flags[flag])
-			*staflags |= (1<<flag);
+			params->sta_flags_set |= (1<<flag);
 
 	return 0;
 }
@@ -1424,7 +1596,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		goto out;
 
@@ -1502,8 +1674,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 		params.ht_capa =
 			nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
 
-	if (parse_station_flags(info->attrs[NL80211_ATTR_STA_FLAGS],
-				&params.station_flags))
+	if (parse_station_flags(info, &params))
 		return -EINVAL;
 
 	if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION])
@@ -1516,6 +1687,12 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out_rtnl;
 
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
 	if (err)
 		goto out;
@@ -1567,13 +1744,16 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 		nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
 	params.listen_interval =
 		nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
+
 	params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+	if (!params.aid || params.aid > IEEE80211_MAX_AID)
+		return -EINVAL;
+
 	if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
 		params.ht_capa =
 			nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
 
-	if (parse_station_flags(info->attrs[NL80211_ATTR_STA_FLAGS],
-				&params.station_flags))
+	if (parse_station_flags(info, &params))
 		return -EINVAL;
 
 	rtnl_lock();
@@ -1582,6 +1762,12 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out_rtnl;
 
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
 	if (err)
 		goto out;
@@ -1625,6 +1811,12 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out_rtnl;
 
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	if (!drv->ops->del_station) {
 		err = -EOPNOTSUPP;
 		goto out;
@@ -1808,7 +2000,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		goto out;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		goto out;
 
@@ -2124,7 +2316,7 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
 		goto out;
 
 	/* Draw up a netlink message to send back */
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		err = -ENOBUFS;
 		goto out;
@@ -2302,7 +2494,7 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info)
 	if (!cfg80211_regdomain)
 		goto out;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		err = -ENOBUFS;
 		goto out;
@@ -2385,18 +2577,24 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
 			rem_reg_rules) {
 		num_rules++;
 		if (num_rules > NL80211_MAX_SUPP_REG_RULES)
-			goto bad_reg;
+			return -EINVAL;
 	}
 
-	if (!reg_is_valid_request(alpha2))
-		return -EINVAL;
+	mutex_lock(&cfg80211_mutex);
+
+	if (!reg_is_valid_request(alpha2)) {
+		r = -EINVAL;
+		goto bad_reg;
+	}
 
 	size_of_regd = sizeof(struct ieee80211_regdomain) +
 		(num_rules * sizeof(struct ieee80211_reg_rule));
 
 	rd = kzalloc(size_of_regd, GFP_KERNEL);
-	if (!rd)
-		return -ENOMEM;
+	if (!rd) {
+		r = -ENOMEM;
+		goto bad_reg;
+	}
 
 	rd->n_reg_rules = num_rules;
 	rd->alpha2[0] = alpha2[0];
@@ -2413,20 +2611,24 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
 
 		rule_idx++;
 
-		if (rule_idx > NL80211_MAX_SUPP_REG_RULES)
+		if (rule_idx > NL80211_MAX_SUPP_REG_RULES) {
+			r = -EINVAL;
 			goto bad_reg;
+		}
 	}
 
 	BUG_ON(rule_idx != num_rules);
 
-	mutex_lock(&cfg80211_mutex);
 	r = set_regdom(rd);
+
 	mutex_unlock(&cfg80211_mutex);
+
 	return r;
 
  bad_reg:
+	mutex_unlock(&cfg80211_mutex);
 	kfree(rd);
-	return -EINVAL;
+	return r;
 }
 
 static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
@@ -2442,6 +2644,9 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	enum ieee80211_band band;
 	size_t ie_len;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2492,6 +2697,11 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	else
 		ie_len = 0;
 
+	if (ie_len > wiphy->max_scan_ie_len) {
+		err = -EINVAL;
+		goto out;
+	}
+
 	request = kzalloc(sizeof(*request)
 			+ sizeof(*ssid) * n_ssids
 			+ sizeof(channel) * n_channels
@@ -2554,7 +2764,8 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 
 	if (info->attrs[NL80211_ATTR_IE]) {
 		request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
-		memcpy(request->ie, nla_data(info->attrs[NL80211_ATTR_IE]),
+		memcpy((void *)request->ie,
+		       nla_data(info->attrs[NL80211_ATTR_IE]),
 		       request->ie_len);
 	}
 
@@ -2710,6 +2921,15 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 	struct wiphy *wiphy;
 	int err;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_MAC])
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_AUTH_TYPE])
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2731,11 +2951,6 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	if (!info->attrs[NL80211_ATTR_MAC]) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	wiphy = &drv->wiphy;
 	memset(&req, 0, sizeof(req));
 
@@ -2761,13 +2976,10 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 		req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
 	}
 
-	if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
-		req.auth_type =
-			nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
-		if (!nl80211_valid_auth_type(req.auth_type)) {
-			err = -EINVAL;
-			goto out;
-		}
+	req.auth_type = nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
+	if (!nl80211_valid_auth_type(req.auth_type)) {
+		err = -EINVAL;
+		goto out;
 	}
 
 	err = drv->ops->auth(&drv->wiphy, dev, &req);
@@ -2788,6 +3000,13 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 	struct wiphy *wiphy;
 	int err;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_MAC] ||
+	    !info->attrs[NL80211_ATTR_SSID])
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2809,12 +3028,6 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	if (!info->attrs[NL80211_ATTR_MAC] ||
-	    !info->attrs[NL80211_ATTR_SSID]) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	wiphy = &drv->wiphy;
 	memset(&req, 0, sizeof(req));
 
@@ -2838,6 +3051,19 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 		req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
 	}
 
+	if (info->attrs[NL80211_ATTR_USE_MFP]) {
+		enum nl80211_mfp use_mfp =
+			nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]);
+		if (use_mfp == NL80211_MFP_REQUIRED)
+			req.use_mfp = true;
+		else if (use_mfp != NL80211_MFP_NO) {
+			err = -EINVAL;
+			goto out;
+		}
+	}
+
+	req.control_port = info->attrs[NL80211_ATTR_CONTROL_PORT];
+
 	err = drv->ops->assoc(&drv->wiphy, dev, &req);
 
 out:
@@ -2856,6 +3082,15 @@ static int nl80211_deauthenticate(struct sk_buff *skb, struct genl_info *info)
 	struct wiphy *wiphy;
 	int err;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_MAC])
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_REASON_CODE])
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2877,24 +3112,16 @@ static int nl80211_deauthenticate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	if (!info->attrs[NL80211_ATTR_MAC]) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	wiphy = &drv->wiphy;
 	memset(&req, 0, sizeof(req));
 
 	req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	if (info->attrs[NL80211_ATTR_REASON_CODE]) {
-		req.reason_code =
-			nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
-		if (req.reason_code == 0) {
-			/* Reason Code 0 is reserved */
-			err = -EINVAL;
-			goto out;
-		}
+	req.reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+	if (req.reason_code == 0) {
+		/* Reason Code 0 is reserved */
+		err = -EINVAL;
+		goto out;
 	}
 
 	if (info->attrs[NL80211_ATTR_IE]) {
@@ -2920,6 +3147,15 @@ static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
 	struct wiphy *wiphy;
 	int err;
 
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_MAC])
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_REASON_CODE])
+		return -EINVAL;
+
 	rtnl_lock();
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
@@ -2941,24 +3177,16 @@ static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	if (!info->attrs[NL80211_ATTR_MAC]) {
-		err = -EINVAL;
-		goto out;
-	}
-
 	wiphy = &drv->wiphy;
 	memset(&req, 0, sizeof(req));
 
 	req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	if (info->attrs[NL80211_ATTR_REASON_CODE]) {
-		req.reason_code =
-			nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
-		if (req.reason_code == 0) {
-			/* Reason Code 0 is reserved */
-			err = -EINVAL;
-			goto out;
-		}
+	req.reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+	if (req.reason_code == 0) {
+		/* Reason Code 0 is reserved */
+		err = -EINVAL;
+		goto out;
 	}
 
 	if (info->attrs[NL80211_ATTR_IE]) {
@@ -2976,6 +3204,124 @@ unlock_rtnl:
 	return err;
 }
 
+static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *drv;
+	struct net_device *dev;
+	struct cfg80211_ibss_params ibss;
+	struct wiphy *wiphy;
+	int err;
+
+	memset(&ibss, 0, sizeof(ibss));
+
+	if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
+	    !info->attrs[NL80211_ATTR_SSID] ||
+	    !nla_len(info->attrs[NL80211_ATTR_SSID]))
+		return -EINVAL;
+
+	ibss.beacon_interval = 100;
+
+	if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
+		ibss.beacon_interval =
+			nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
+		if (ibss.beacon_interval < 1 || ibss.beacon_interval > 10000)
+			return -EINVAL;
+	}
+
+	rtnl_lock();
+
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+	if (err)
+		goto unlock_rtnl;
+
+	if (!drv->ops->join_ibss) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (!netif_running(dev)) {
+		err = -ENETDOWN;
+		goto out;
+	}
+
+	wiphy = &drv->wiphy;
+
+	if (info->attrs[NL80211_ATTR_MAC])
+		ibss.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
+	ibss.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
+	ibss.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
+
+	if (info->attrs[NL80211_ATTR_IE]) {
+		ibss.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+		ibss.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+	}
+
+	ibss.channel = ieee80211_get_channel(wiphy,
+		nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+	if (!ibss.channel ||
+	    ibss.channel->flags & IEEE80211_CHAN_NO_IBSS ||
+	    ibss.channel->flags & IEEE80211_CHAN_DISABLED) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
+
+	err = cfg80211_join_ibss(drv, dev, &ibss);
+
+out:
+	cfg80211_put_dev(drv);
+	dev_put(dev);
+unlock_rtnl:
+	rtnl_unlock();
+	return err;
+}
+
+static int nl80211_leave_ibss(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *drv;
+	struct net_device *dev;
+	int err;
+
+	rtnl_lock();
+
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+	if (err)
+		goto unlock_rtnl;
+
+	if (!drv->ops->leave_ibss) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (!netif_running(dev)) {
+		err = -ENETDOWN;
+		goto out;
+	}
+
+	err = cfg80211_leave_ibss(drv, dev, false);
+
+out:
+	cfg80211_put_dev(drv);
+	dev_put(dev);
+unlock_rtnl:
+	rtnl_unlock();
+	return err;
+}
+
 static struct genl_ops nl80211_ops[] = {
 	{
 		.cmd = NL80211_CMD_GET_WIPHY,
@@ -3177,6 +3523,18 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 	},
+	{
+		.cmd = NL80211_CMD_JOIN_IBSS,
+		.doit = nl80211_join_ibss,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
+	{
+		.cmd = NL80211_CMD_LEAVE_IBSS,
+		.doit = nl80211_leave_ibss,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
 };
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
 	.name = "mlme",
@@ -3199,7 +3557,7 @@ void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev)
 {
 	struct sk_buff *msg;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
 
@@ -3211,11 +3569,43 @@ void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev)
 	genlmsg_multicast(msg, 0, nl80211_config_mcgrp.id, GFP_KERNEL);
 }
 
+static int nl80211_add_scan_req(struct sk_buff *msg,
+				struct cfg80211_registered_device *rdev)
+{
+	struct cfg80211_scan_request *req = rdev->scan_req;
+	struct nlattr *nest;
+	int i;
+
+	if (WARN_ON(!req))
+		return 0;
+
+	nest = nla_nest_start(msg, NL80211_ATTR_SCAN_SSIDS);
+	if (!nest)
+		goto nla_put_failure;
+	for (i = 0; i < req->n_ssids; i++)
+		NLA_PUT(msg, i, req->ssids[i].ssid_len, req->ssids[i].ssid);
+	nla_nest_end(msg, nest);
+
+	nest = nla_nest_start(msg, NL80211_ATTR_SCAN_FREQUENCIES);
+	if (!nest)
+		goto nla_put_failure;
+	for (i = 0; i < req->n_channels; i++)
+		NLA_PUT_U32(msg, i, req->channels[i]->center_freq);
+	nla_nest_end(msg, nest);
+
+	if (req->ie)
+		NLA_PUT(msg, NL80211_ATTR_IE, req->ie_len, req->ie);
+
+	return 0;
+ nla_put_failure:
+	return -ENOBUFS;
+}
+
 static int nl80211_send_scan_donemsg(struct sk_buff *msg,
-				    struct cfg80211_registered_device *rdev,
-				    struct net_device *netdev,
-				    u32 pid, u32 seq, int flags,
-				    u32 cmd)
+				     struct cfg80211_registered_device *rdev,
+				     struct net_device *netdev,
+				     u32 pid, u32 seq, int flags,
+				     u32 cmd)
 {
 	void *hdr;
 
@@ -3226,7 +3616,8 @@ static int nl80211_send_scan_donemsg(struct sk_buff *msg,
 	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
 	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
 
-	/* XXX: we should probably bounce back the request? */
+	/* ignore errors and send incomplete event anyway */
+	nl80211_add_scan_req(msg, rdev);
 
 	return genlmsg_end(msg, hdr);
 
@@ -3240,7 +3631,7 @@ void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
 {
 	struct sk_buff *msg;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
 
@@ -3258,7 +3649,7 @@ void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
 {
 	struct sk_buff *msg;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
 
@@ -3280,7 +3671,7 @@ void nl80211_send_reg_change_event(struct regulatory_request *request)
 	struct sk_buff *msg;
 	void *hdr;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg)
 		return;
 
@@ -3334,7 +3725,7 @@ static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev,
 	struct sk_buff *msg;
 	void *hdr;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
 	if (!msg)
 		return;
 
@@ -3375,38 +3766,208 @@ void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
 	nl80211_send_mlme_event(rdev, netdev, buf, len, NL80211_CMD_ASSOCIATE);
 }
 
-void nl80211_send_rx_deauth(struct cfg80211_registered_device *rdev,
-			    struct net_device *netdev, const u8 *buf,
-			    size_t len)
+void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
+			 struct net_device *netdev, const u8 *buf, size_t len)
 {
 	nl80211_send_mlme_event(rdev, netdev, buf, len,
 				NL80211_CMD_DEAUTHENTICATE);
 }
 
-void nl80211_send_rx_disassoc(struct cfg80211_registered_device *rdev,
-			      struct net_device *netdev, const u8 *buf,
-			      size_t len)
+void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
+			   struct net_device *netdev, const u8 *buf,
+			   size_t len)
 {
 	nl80211_send_mlme_event(rdev, netdev, buf, len,
 				NL80211_CMD_DISASSOCIATE);
 }
 
+static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev,
+				      struct net_device *netdev, int cmd,
+				      const u8 *addr)
+{
+	struct sk_buff *msg;
+	void *hdr;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+	NLA_PUT_FLAG(msg, NL80211_ATTR_TIMED_OUT);
+	NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
+	return;
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
+void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
+			       struct net_device *netdev, const u8 *addr)
+{
+	nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_AUTHENTICATE,
+				  addr);
+}
+
+void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
+				struct net_device *netdev, const u8 *addr)
+{
+	nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_ASSOCIATE, addr);
+}
+
+void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
+			     struct net_device *netdev, const u8 *bssid,
+			     gfp_t gfp)
+{
+	struct sk_buff *msg;
+	void *hdr;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_JOIN_IBSS);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+	NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+	return;
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
+void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
+				 struct net_device *netdev, const u8 *addr,
+				 enum nl80211_key_type key_type, int key_id,
+				 const u8 *tsc)
+{
+	struct sk_buff *msg;
+	void *hdr;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_MICHAEL_MIC_FAILURE);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+	if (addr)
+		NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
+	NLA_PUT_U32(msg, NL80211_ATTR_KEY_TYPE, key_type);
+	NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_id);
+	if (tsc)
+		NLA_PUT(msg, NL80211_ATTR_KEY_SEQ, 6, tsc);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
+	return;
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
+void nl80211_send_beacon_hint_event(struct wiphy *wiphy,
+				    struct ieee80211_channel *channel_before,
+				    struct ieee80211_channel *channel_after)
+{
+	struct sk_buff *msg;
+	void *hdr;
+	struct nlattr *nl_freq;
+
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_REG_BEACON_HINT);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	/*
+	 * Since we are applying the beacon hint to a wiphy we know its
+	 * wiphy_idx is valid
+	 */
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, get_wiphy_idx(wiphy));
+
+	/* Before */
+	nl_freq = nla_nest_start(msg, NL80211_ATTR_FREQ_BEFORE);
+	if (!nl_freq)
+		goto nla_put_failure;
+	if (nl80211_msg_put_channel(msg, channel_before))
+		goto nla_put_failure;
+	nla_nest_end(msg, nl_freq);
+
+	/* After */
+	nl_freq = nla_nest_start(msg, NL80211_ATTR_FREQ_AFTER);
+	if (!nl_freq)
+		goto nla_put_failure;
+	if (nl80211_msg_put_channel(msg, channel_after))
+		goto nla_put_failure;
+	nla_nest_end(msg, nl_freq);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast(msg, 0, nl80211_regulatory_mcgrp.id, GFP_ATOMIC);
+
+	return;
+
+nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
 /* initialisation/exit functions */
 
 int nl80211_init(void)
 {
-	int err, i;
+	int err;
 
-	err = genl_register_family(&nl80211_fam);
+	err = genl_register_family_with_ops(&nl80211_fam,
+		nl80211_ops, ARRAY_SIZE(nl80211_ops));
 	if (err)
 		return err;
 
-	for (i = 0; i < ARRAY_SIZE(nl80211_ops); i++) {
-		err = genl_register_ops(&nl80211_fam, &nl80211_ops[i]);
-		if (err)
-			goto err_out;
-	}
-
 	err = genl_register_mc_group(&nl80211_fam, &nl80211_config_mcgrp);
 	if (err)
 		goto err_out;
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index b77af4ab80b..5c12ad13499 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -17,11 +17,31 @@ extern void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
 extern void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
 				  struct net_device *netdev,
 				  const u8 *buf, size_t len);
-extern void nl80211_send_rx_deauth(struct cfg80211_registered_device *rdev,
-				   struct net_device *netdev,
-				   const u8 *buf, size_t len);
-extern void nl80211_send_rx_disassoc(struct cfg80211_registered_device *rdev,
-				     struct net_device *netdev,
-				     const u8 *buf, size_t len);
+extern void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
+				struct net_device *netdev,
+				const u8 *buf, size_t len);
+extern void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
+				  struct net_device *netdev,
+				  const u8 *buf, size_t len);
+extern void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
+				      struct net_device *netdev,
+				      const u8 *addr);
+extern void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
+				       struct net_device *netdev,
+				       const u8 *addr);
+extern void
+nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
+			    struct net_device *netdev, const u8 *addr,
+			    enum nl80211_key_type key_type,
+			    int key_id, const u8 *tsc);
+
+extern void
+nl80211_send_beacon_hint_event(struct wiphy *wiphy,
+			       struct ieee80211_channel *channel_before,
+			       struct ieee80211_channel *channel_after);
+
+void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
+			     struct net_device *netdev, const u8 *bssid,
+			     gfp_t gfp);
 
 #endif /* __NET_WIRELESS_NL80211_H */
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 487cb627ddb..5e14371cda7 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -37,7 +37,6 @@
 #include <linux/random.h>
 #include <linux/nl80211.h>
 #include <linux/platform_device.h>
-#include <net/wireless.h>
 #include <net/cfg80211.h>
 #include "core.h"
 #include "reg.h"
@@ -49,12 +48,6 @@ static struct regulatory_request *last_request;
 /* To trigger userspace events */
 static struct platform_device *reg_pdev;
 
-/* Keep the ordering from large to small */
-static u32 supported_bandwidths[] = {
-	MHZ_TO_KHZ(40),
-	MHZ_TO_KHZ(20),
-};
-
 /*
  * Central wireless core regulatory domains, we only need two,
  * the current one and a world regulatory domain in case we have no
@@ -389,6 +382,8 @@ static int call_crda(const char *alpha2)
 /* Used by nl80211 before kmalloc'ing our regulatory domain */
 bool reg_is_valid_request(const char *alpha2)
 {
+	assert_cfg80211_lock();
+
 	if (!last_request)
 		return false;
 
@@ -436,19 +431,20 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd)
 	return true;
 }
 
-/* Returns value in KHz */
-static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range,
-	u32 freq)
+static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range,
+			    u32 center_freq_khz,
+			    u32 bw_khz)
 {
-	unsigned int i;
-	for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) {
-		u32 start_freq_khz = freq - supported_bandwidths[i]/2;
-		u32 end_freq_khz = freq + supported_bandwidths[i]/2;
-		if (start_freq_khz >= freq_range->start_freq_khz &&
-			end_freq_khz <= freq_range->end_freq_khz)
-			return supported_bandwidths[i];
-	}
-	return 0;
+	u32 start_freq_khz, end_freq_khz;
+
+	start_freq_khz = center_freq_khz - (bw_khz/2);
+	end_freq_khz = center_freq_khz + (bw_khz/2);
+
+	if (start_freq_khz >= freq_range->start_freq_khz &&
+	    end_freq_khz <= freq_range->end_freq_khz)
+		return true;
+
+	return false;
 }
 
 /**
@@ -848,14 +844,17 @@ static u32 map_regdom_flags(u32 rd_flags)
 
 static int freq_reg_info_regd(struct wiphy *wiphy,
 			      u32 center_freq,
-			      u32 *bandwidth,
+			      u32 desired_bw_khz,
 			      const struct ieee80211_reg_rule **reg_rule,
 			      const struct ieee80211_regdomain *custom_regd)
 {
 	int i;
 	bool band_rule_found = false;
 	const struct ieee80211_regdomain *regd;
-	u32 max_bandwidth = 0;
+	bool bw_fits = false;
+
+	if (!desired_bw_khz)
+		desired_bw_khz = MHZ_TO_KHZ(20);
 
 	regd = custom_regd ? custom_regd : cfg80211_regdomain;
 
@@ -888,38 +887,54 @@ static int freq_reg_info_regd(struct wiphy *wiphy,
 		if (!band_rule_found)
 			band_rule_found = freq_in_rule_band(fr, center_freq);
 
-		max_bandwidth = freq_max_bandwidth(fr, center_freq);
+		bw_fits = reg_does_bw_fit(fr,
+					  center_freq,
+					  desired_bw_khz);
 
-		if (max_bandwidth && *bandwidth <= max_bandwidth) {
+		if (band_rule_found && bw_fits) {
 			*reg_rule = rr;
-			*bandwidth = max_bandwidth;
-			break;
+			return 0;
 		}
 	}
 
 	if (!band_rule_found)
 		return -ERANGE;
 
-	return !max_bandwidth;
+	return -EINVAL;
 }
 EXPORT_SYMBOL(freq_reg_info);
 
-int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
-			 const struct ieee80211_reg_rule **reg_rule)
+int freq_reg_info(struct wiphy *wiphy,
+		  u32 center_freq,
+		  u32 desired_bw_khz,
+		  const struct ieee80211_reg_rule **reg_rule)
 {
 	assert_cfg80211_lock();
-	return freq_reg_info_regd(wiphy, center_freq,
-		bandwidth, reg_rule, NULL);
+	return freq_reg_info_regd(wiphy,
+				  center_freq,
+				  desired_bw_khz,
+				  reg_rule,
+				  NULL);
 }
 
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel). To support
+ * smaller custom bandwidths such as 5 MHz or 10 MHz we'll need a
+ * new ieee80211_channel.target_bw and re run the regulatory check
+ * on the wiphy with the target_bw specified. Then we can simply use
+ * that below for the desired_bw_khz below.
+ */
 static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 			   unsigned int chan_idx)
 {
 	int r;
-	u32 flags;
-	u32 max_bandwidth = 0;
+	u32 flags, bw_flags = 0;
+	u32 desired_bw_khz = MHZ_TO_KHZ(20);
 	const struct ieee80211_reg_rule *reg_rule = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
+	const struct ieee80211_freq_range *freq_range = NULL;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *chan;
 	struct wiphy *request_wiphy = NULL;
@@ -934,8 +949,10 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 
 	flags = chan->orig_flags;
 
-	r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq),
-		&max_bandwidth, &reg_rule);
+	r = freq_reg_info(wiphy,
+			  MHZ_TO_KHZ(chan->center_freq),
+			  desired_bw_khz,
+			  &reg_rule);
 
 	if (r) {
 		/*
@@ -978,6 +995,10 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 	}
 
 	power_rule = &reg_rule->power_rule;
+	freq_range = &reg_rule->freq_range;
+
+	if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40))
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 
 	if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
 	    request_wiphy && request_wiphy == wiphy &&
@@ -988,19 +1009,19 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 		 * settings
 		 */
 		chan->flags = chan->orig_flags =
-			map_regdom_flags(reg_rule->flags);
+			map_regdom_flags(reg_rule->flags) | bw_flags;
 		chan->max_antenna_gain = chan->orig_mag =
 			(int) MBI_TO_DBI(power_rule->max_antenna_gain);
-		chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+		chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
 		chan->max_power = chan->orig_mpwr =
 			(int) MBM_TO_DBM(power_rule->max_eirp);
 		return;
 	}
 
-	chan->flags = flags | map_regdom_flags(reg_rule->flags);
+	chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
 	chan->max_antenna_gain = min(chan->orig_mag,
 		(int) MBI_TO_DBI(power_rule->max_antenna_gain));
-	chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+	chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
 	if (chan->orig_mpwr)
 		chan->max_power = min(chan->orig_mpwr,
 			(int) MBM_TO_DBM(power_rule->max_eirp));
@@ -1050,18 +1071,10 @@ static void handle_reg_beacon(struct wiphy *wiphy,
 			      unsigned int chan_idx,
 			      struct reg_beacon *reg_beacon)
 {
-#ifdef CONFIG_CFG80211_REG_DEBUG
-#define REG_DEBUG_BEACON_FLAG(desc) \
-	printk(KERN_DEBUG "cfg80211: Enabling " desc " on " \
-		"frequency: %d MHz (Ch %d) on %s\n", \
-		reg_beacon->chan.center_freq, \
-		ieee80211_frequency_to_channel(reg_beacon->chan.center_freq), \
-		wiphy_name(wiphy));
-#else
-#define REG_DEBUG_BEACON_FLAG(desc) do {} while (0)
-#endif
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *chan;
+	bool channel_changed = false;
+	struct ieee80211_channel chan_before;
 
 	assert_cfg80211_lock();
 
@@ -1071,18 +1084,28 @@ static void handle_reg_beacon(struct wiphy *wiphy,
 	if (likely(chan->center_freq != reg_beacon->chan.center_freq))
 		return;
 
-	if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+	if (chan->beacon_found)
+		return;
+
+	chan->beacon_found = true;
+
+	chan_before.center_freq = chan->center_freq;
+	chan_before.flags = chan->flags;
+
+	if ((chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+	    !(chan->orig_flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
 		chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
-		REG_DEBUG_BEACON_FLAG("active scanning");
+		channel_changed = true;
 	}
 
-	if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
+	if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
+	    !(chan->orig_flags & IEEE80211_CHAN_NO_IBSS)) {
 		chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
-		REG_DEBUG_BEACON_FLAG("beaconing");
+		channel_changed = true;
 	}
 
-	chan->beacon_found = true;
-#undef REG_DEBUG_BEACON_FLAG
+	if (channel_changed)
+		nl80211_send_beacon_hint_event(wiphy, &chan_before, chan);
 }
 
 /*
@@ -1155,6 +1178,93 @@ static void reg_process_beacons(struct wiphy *wiphy)
 	wiphy_update_beacon_reg(wiphy);
 }
 
+static bool is_ht40_not_allowed(struct ieee80211_channel *chan)
+{
+	if (!chan)
+		return true;
+	if (chan->flags & IEEE80211_CHAN_DISABLED)
+		return true;
+	/* This would happen when regulatory rules disallow HT40 completely */
+	if (IEEE80211_CHAN_NO_HT40 == (chan->flags & (IEEE80211_CHAN_NO_HT40)))
+		return true;
+	return false;
+}
+
+static void reg_process_ht_flags_channel(struct wiphy *wiphy,
+					 enum ieee80211_band band,
+					 unsigned int chan_idx)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *channel;
+	struct ieee80211_channel *channel_before = NULL, *channel_after = NULL;
+	unsigned int i;
+
+	assert_cfg80211_lock();
+
+	sband = wiphy->bands[band];
+	BUG_ON(chan_idx >= sband->n_channels);
+	channel = &sband->channels[chan_idx];
+
+	if (is_ht40_not_allowed(channel)) {
+		channel->flags |= IEEE80211_CHAN_NO_HT40;
+		return;
+	}
+
+	/*
+	 * We need to ensure the extension channels exist to
+	 * be able to use HT40- or HT40+, this finds them (or not)
+	 */
+	for (i = 0; i < sband->n_channels; i++) {
+		struct ieee80211_channel *c = &sband->channels[i];
+		if (c->center_freq == (channel->center_freq - 20))
+			channel_before = c;
+		if (c->center_freq == (channel->center_freq + 20))
+			channel_after = c;
+	}
+
+	/*
+	 * Please note that this assumes target bandwidth is 20 MHz,
+	 * if that ever changes we also need to change the below logic
+	 * to include that as well.
+	 */
+	if (is_ht40_not_allowed(channel_before))
+		channel->flags |= IEEE80211_CHAN_NO_HT40MINUS;
+	else
+		channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS;
+
+	if (is_ht40_not_allowed(channel_after))
+		channel->flags |= IEEE80211_CHAN_NO_HT40PLUS;
+	else
+		channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS;
+}
+
+static void reg_process_ht_flags_band(struct wiphy *wiphy,
+				      enum ieee80211_band band)
+{
+	unsigned int i;
+	struct ieee80211_supported_band *sband;
+
+	BUG_ON(!wiphy->bands[band]);
+	sband = wiphy->bands[band];
+
+	for (i = 0; i < sband->n_channels; i++)
+		reg_process_ht_flags_channel(wiphy, band, i);
+}
+
+static void reg_process_ht_flags(struct wiphy *wiphy)
+{
+	enum ieee80211_band band;
+
+	if (!wiphy)
+		return;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (wiphy->bands[band])
+			reg_process_ht_flags_band(wiphy, band);
+	}
+
+}
+
 void wiphy_update_regulatory(struct wiphy *wiphy,
 			     enum nl80211_reg_initiator initiator)
 {
@@ -1168,6 +1278,7 @@ void wiphy_update_regulatory(struct wiphy *wiphy,
 	}
 out:
 	reg_process_beacons(wiphy);
+	reg_process_ht_flags(wiphy);
 	if (wiphy->reg_notifier)
 		wiphy->reg_notifier(wiphy, last_request);
 }
@@ -1178,9 +1289,11 @@ static void handle_channel_custom(struct wiphy *wiphy,
 				  const struct ieee80211_regdomain *regd)
 {
 	int r;
-	u32 max_bandwidth = 0;
+	u32 desired_bw_khz = MHZ_TO_KHZ(20);
+	u32 bw_flags = 0;
 	const struct ieee80211_reg_rule *reg_rule = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
+	const struct ieee80211_freq_range *freq_range = NULL;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *chan;
 
@@ -1190,8 +1303,11 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	BUG_ON(chan_idx >= sband->n_channels);
 	chan = &sband->channels[chan_idx];
 
-	r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq),
-		&max_bandwidth, &reg_rule, regd);
+	r = freq_reg_info_regd(wiphy,
+			       MHZ_TO_KHZ(chan->center_freq),
+			       desired_bw_khz,
+			       &reg_rule,
+			       regd);
 
 	if (r) {
 		chan->flags = IEEE80211_CHAN_DISABLED;
@@ -1199,10 +1315,14 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	}
 
 	power_rule = &reg_rule->power_rule;
+	freq_range = &reg_rule->freq_range;
+
+	if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40))
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 
-	chan->flags |= map_regdom_flags(reg_rule->flags);
+	chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
 	chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
-	chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+	chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
 	chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
 }
 
@@ -1224,13 +1344,22 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
 				   const struct ieee80211_regdomain *regd)
 {
 	enum ieee80211_band band;
+	unsigned int bands_set = 0;
 
 	mutex_lock(&cfg80211_mutex);
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
-		if (wiphy->bands[band])
-			handle_band_custom(wiphy, band, regd);
+		if (!wiphy->bands[band])
+			continue;
+		handle_band_custom(wiphy, band, regd);
+		bands_set++;
 	}
 	mutex_unlock(&cfg80211_mutex);
+
+	/*
+	 * no point in calling this if it won't have any effect
+	 * on your device's supportd bands.
+	 */
+	WARN_ON(!bands_set);
 }
 EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
 
@@ -2000,7 +2129,12 @@ static int __set_regdom(const struct ieee80211_regdomain *rd)
 		 * driver wanted to the wiphy to deal with conflicts
 		 */
 
-		BUG_ON(request_wiphy->regd);
+		/*
+		 * Userspace could have sent two replies with only
+		 * one kernel request.
+		 */
+		if (request_wiphy->regd)
+			return -EALREADY;
 
 		r = reg_copy_regd(&request_wiphy->regd, rd);
 		if (r)
@@ -2042,7 +2176,13 @@ static int __set_regdom(const struct ieee80211_regdomain *rd)
 	 * the country IE rd with what CRDA believes that country should have
 	 */
 
-	BUG_ON(!country_ie_regdomain);
+	/*
+	 * Userspace could have sent two replies with only
+	 * one kernel request. By the second reply we would have
+	 * already processed and consumed the country_ie_regdomain.
+	 */
+	if (!country_ie_regdomain)
+		return -EALREADY;
 	BUG_ON(rd == country_ie_regdomain);
 
 	/*
@@ -2119,14 +2259,14 @@ void reg_device_remove(struct wiphy *wiphy)
 
 	assert_cfg80211_lock();
 
+	kfree(wiphy->regd);
+
 	if (last_request)
 		request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
 
-	kfree(wiphy->regd);
-	if (!last_request || !request_wiphy)
-		return;
-	if (request_wiphy != wiphy)
+	if (!request_wiphy || request_wiphy != wiphy)
 		return;
+
 	last_request->wiphy_idx = WIPHY_IDX_STALE;
 	last_request->country_ie_env = ENVIRON_ANY;
 }
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 1f260c40b6c..e95b638b919 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -29,13 +29,14 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 		goto out;
 
 	WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req);
-	wiphy_to_dev(request->wiphy)->scan_req = NULL;
 
 	if (aborted)
 		nl80211_send_scan_aborted(wiphy_to_dev(request->wiphy), dev);
 	else
 		nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev);
 
+	wiphy_to_dev(request->wiphy)->scan_req = NULL;
+
 #ifdef CONFIG_WIRELESS_EXT
 	if (!aborted) {
 		memset(&wrqu, 0, sizeof(wrqu));
@@ -377,18 +378,16 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 			size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
 			size_t ielen = res->pub.len_information_elements;
 
-			if (ksize(found) >= used + ielen) {
+			if (!found->ies_allocated && ksize(found) >= used + ielen) {
 				memcpy(found->pub.information_elements,
 				       res->pub.information_elements, ielen);
 				found->pub.len_information_elements = ielen;
 			} else {
 				u8 *ies = found->pub.information_elements;
 
-				if (found->ies_allocated) {
-					if (ksize(ies) < ielen)
-						ies = krealloc(ies, ielen,
-							       GFP_ATOMIC);
-				} else
+				if (found->ies_allocated)
+					ies = krealloc(ies, ielen, GFP_ATOMIC);
+				else
 					ies = kmalloc(ielen, GFP_ATOMIC);
 
 				if (ies) {
@@ -415,6 +414,55 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 	return found;
 }
 
+struct cfg80211_bss*
+cfg80211_inform_bss(struct wiphy *wiphy,
+		    struct ieee80211_channel *channel,
+		    const u8 *bssid,
+		    u64 timestamp, u16 capability, u16 beacon_interval,
+		    const u8 *ie, size_t ielen,
+		    s32 signal, gfp_t gfp)
+{
+	struct cfg80211_internal_bss *res;
+	size_t privsz;
+
+	if (WARN_ON(!wiphy))
+		return NULL;
+
+	privsz = wiphy->bss_priv_size;
+
+	if (WARN_ON(wiphy->signal_type == NL80211_BSS_SIGNAL_UNSPEC &&
+			(signal < 0 || signal > 100)))
+		return NULL;
+
+	res = kzalloc(sizeof(*res) + privsz + ielen, gfp);
+	if (!res)
+		return NULL;
+
+	memcpy(res->pub.bssid, bssid, ETH_ALEN);
+	res->pub.channel = channel;
+	res->pub.signal = signal;
+	res->pub.tsf = timestamp;
+	res->pub.beacon_interval = beacon_interval;
+	res->pub.capability = capability;
+	/* point to after the private area */
+	res->pub.information_elements = (u8 *)res + sizeof(*res) + privsz;
+	memcpy(res->pub.information_elements, ie, ielen);
+	res->pub.len_information_elements = ielen;
+
+	kref_init(&res->ref);
+
+	res = cfg80211_bss_update(wiphy_to_dev(wiphy), res, 0);
+	if (!res)
+		return NULL;
+
+	if (res->pub.capability & WLAN_CAPABILITY_ESS)
+		regulatory_hint_found_beacon(wiphy, channel, gfp);
+
+	/* cfg80211_bss_update gives us a referenced result */
+	return &res->pub;
+}
+EXPORT_SYMBOL(cfg80211_inform_bss);
+
 struct cfg80211_bss *
 cfg80211_inform_bss_frame(struct wiphy *wiphy,
 			  struct ieee80211_channel *channel,
@@ -605,7 +653,7 @@ int cfg80211_wext_siwscan(struct net_device *dev,
 	cfg80211_put_dev(rdev);
 	return err;
 }
-EXPORT_SYMBOL(cfg80211_wext_siwscan);
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwscan);
 
 static void ieee80211_scan_add_ies(struct iw_request_info *info,
 				   struct cfg80211_bss *bss,
@@ -914,5 +962,5 @@ int cfg80211_wext_giwscan(struct net_device *dev,
 	cfg80211_put_dev(rdev);
 	return res;
 }
-EXPORT_SYMBOL(cfg80211_wext_giwscan);
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwscan);
 #endif
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 487cdd9bcff..25550692dda 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1,10 +1,12 @@
 /*
  * Wireless utility functions
  *
- * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net>
  */
-#include <net/wireless.h>
-#include <asm/bitops.h>
+#include <linux/bitops.h>
+#include <linux/etherdevice.h>
+#include <net/cfg80211.h>
+#include <net/ip.h>
 #include "core.h"
 
 struct ieee80211_rate *
@@ -138,3 +140,365 @@ void ieee80211_set_bitrate_flags(struct wiphy *wiphy)
 		if (wiphy->bands[band])
 			set_mandatory_flags_band(wiphy->bands[band], band);
 }
+
+int cfg80211_validate_key_settings(struct key_params *params, int key_idx,
+				   const u8 *mac_addr)
+{
+	if (key_idx > 5)
+		return -EINVAL;
+
+	/*
+	 * Disallow pairwise keys with non-zero index unless it's WEP
+	 * (because current deployments use pairwise WEP keys with
+	 * non-zero indizes but 802.11i clearly specifies to use zero)
+	 */
+	if (mac_addr && key_idx &&
+	    params->cipher != WLAN_CIPHER_SUITE_WEP40 &&
+	    params->cipher != WLAN_CIPHER_SUITE_WEP104)
+		return -EINVAL;
+
+	switch (params->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+		if (params->key_len != WLAN_KEY_LEN_WEP40)
+			return -EINVAL;
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		if (params->key_len != WLAN_KEY_LEN_TKIP)
+			return -EINVAL;
+		break;
+	case WLAN_CIPHER_SUITE_CCMP:
+		if (params->key_len != WLAN_KEY_LEN_CCMP)
+			return -EINVAL;
+		break;
+	case WLAN_CIPHER_SUITE_WEP104:
+		if (params->key_len != WLAN_KEY_LEN_WEP104)
+			return -EINVAL;
+		break;
+	case WLAN_CIPHER_SUITE_AES_CMAC:
+		if (params->key_len != WLAN_KEY_LEN_AES_CMAC)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (params->seq) {
+		switch (params->cipher) {
+		case WLAN_CIPHER_SUITE_WEP40:
+		case WLAN_CIPHER_SUITE_WEP104:
+			/* These ciphers do not use key sequence */
+			return -EINVAL;
+		case WLAN_CIPHER_SUITE_TKIP:
+		case WLAN_CIPHER_SUITE_CCMP:
+		case WLAN_CIPHER_SUITE_AES_CMAC:
+			if (params->seq_len != 6)
+				return -EINVAL;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
+/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
+const unsigned char rfc1042_header[] __aligned(2) =
+	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+EXPORT_SYMBOL(rfc1042_header);
+
+/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
+const unsigned char bridge_tunnel_header[] __aligned(2) =
+	{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
+EXPORT_SYMBOL(bridge_tunnel_header);
+
+unsigned int ieee80211_hdrlen(__le16 fc)
+{
+	unsigned int hdrlen = 24;
+
+	if (ieee80211_is_data(fc)) {
+		if (ieee80211_has_a4(fc))
+			hdrlen = 30;
+		if (ieee80211_is_data_qos(fc))
+			hdrlen += IEEE80211_QOS_CTL_LEN;
+		goto out;
+	}
+
+	if (ieee80211_is_ctl(fc)) {
+		/*
+		 * ACK and CTS are 10 bytes, all others 16. To see how
+		 * to get this condition consider
+		 *   subtype mask:   0b0000000011110000 (0x00F0)
+		 *   ACK subtype:    0b0000000011010000 (0x00D0)
+		 *   CTS subtype:    0b0000000011000000 (0x00C0)
+		 *   bits that matter:         ^^^      (0x00E0)
+		 *   value of those: 0b0000000011000000 (0x00C0)
+		 */
+		if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0))
+			hdrlen = 10;
+		else
+			hdrlen = 16;
+	}
+out:
+	return hdrlen;
+}
+EXPORT_SYMBOL(ieee80211_hdrlen);
+
+unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb)
+{
+	const struct ieee80211_hdr *hdr =
+			(const struct ieee80211_hdr *)skb->data;
+	unsigned int hdrlen;
+
+	if (unlikely(skb->len < 10))
+		return 0;
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+	if (unlikely(hdrlen > skb->len))
+		return 0;
+	return hdrlen;
+}
+EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
+
+static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
+{
+	int ae = meshhdr->flags & MESH_FLAGS_AE;
+	/* 7.1.3.5a.2 */
+	switch (ae) {
+	case 0:
+		return 6;
+	case 1:
+		return 12;
+	case 2:
+		return 18;
+	case 3:
+		return 24;
+	default:
+		return 6;
+	}
+}
+
+int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr,
+			   enum nl80211_iftype iftype)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	u16 hdrlen, ethertype;
+	u8 *payload;
+	u8 dst[ETH_ALEN];
+	u8 src[ETH_ALEN] __aligned(2);
+
+	if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
+		return -1;
+
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+	/* convert IEEE 802.11 header + possible LLC headers into Ethernet
+	 * header
+	 * IEEE 802.11 address fields:
+	 * ToDS FromDS Addr1 Addr2 Addr3 Addr4
+	 *   0     0   DA    SA    BSSID n/a
+	 *   0     1   DA    BSSID SA    n/a
+	 *   1     0   BSSID SA    DA    n/a
+	 *   1     1   RA    TA    DA    SA
+	 */
+	memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN);
+	memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN);
+
+	switch (hdr->frame_control &
+		cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) {
+	case cpu_to_le16(IEEE80211_FCTL_TODS):
+		if (unlikely(iftype != NL80211_IFTYPE_AP &&
+			     iftype != NL80211_IFTYPE_AP_VLAN))
+			return -1;
+		break;
+	case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
+		if (unlikely(iftype != NL80211_IFTYPE_WDS &&
+			     iftype != NL80211_IFTYPE_MESH_POINT))
+			return -1;
+		if (iftype == NL80211_IFTYPE_MESH_POINT) {
+			struct ieee80211s_hdr *meshdr =
+				(struct ieee80211s_hdr *) (skb->data + hdrlen);
+			hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
+			if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
+				memcpy(dst, meshdr->eaddr1, ETH_ALEN);
+				memcpy(src, meshdr->eaddr2, ETH_ALEN);
+			}
+		}
+		break;
+	case cpu_to_le16(IEEE80211_FCTL_FROMDS):
+		if (iftype != NL80211_IFTYPE_STATION ||
+		    (is_multicast_ether_addr(dst) &&
+		     !compare_ether_addr(src, addr)))
+			return -1;
+		break;
+	case cpu_to_le16(0):
+		if (iftype != NL80211_IFTYPE_ADHOC)
+			return -1;
+		break;
+	}
+
+	if (unlikely(skb->len - hdrlen < 8))
+		return -1;
+
+	payload = skb->data + hdrlen;
+	ethertype = (payload[6] << 8) | payload[7];
+
+	if (likely((compare_ether_addr(payload, rfc1042_header) == 0 &&
+		    ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
+		   compare_ether_addr(payload, bridge_tunnel_header) == 0)) {
+		/* remove RFC1042 or Bridge-Tunnel encapsulation and
+		 * replace EtherType */
+		skb_pull(skb, hdrlen + 6);
+		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
+		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
+	} else {
+		struct ethhdr *ehdr;
+		__be16 len;
+
+		skb_pull(skb, hdrlen);
+		len = htons(skb->len);
+		ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr));
+		memcpy(ehdr->h_dest, dst, ETH_ALEN);
+		memcpy(ehdr->h_source, src, ETH_ALEN);
+		ehdr->h_proto = len;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(ieee80211_data_to_8023);
+
+int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr,
+			     enum nl80211_iftype iftype, u8 *bssid, bool qos)
+{
+	struct ieee80211_hdr hdr;
+	u16 hdrlen, ethertype;
+	__le16 fc;
+	const u8 *encaps_data;
+	int encaps_len, skip_header_bytes;
+	int nh_pos, h_pos;
+	int head_need;
+
+	if (unlikely(skb->len < ETH_HLEN))
+		return -EINVAL;
+
+	nh_pos = skb_network_header(skb) - skb->data;
+	h_pos = skb_transport_header(skb) - skb->data;
+
+	/* convert Ethernet header to proper 802.11 header (based on
+	 * operation mode) */
+	ethertype = (skb->data[12] << 8) | skb->data[13];
+	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA);
+
+	switch (iftype) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_AP_VLAN:
+		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
+		/* DA BSSID SA */
+		memcpy(hdr.addr1, skb->data, ETH_ALEN);
+		memcpy(hdr.addr2, addr, ETH_ALEN);
+		memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN);
+		hdrlen = 24;
+		break;
+	case NL80211_IFTYPE_STATION:
+		fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
+		/* BSSID SA DA */
+		memcpy(hdr.addr1, bssid, ETH_ALEN);
+		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
+		memcpy(hdr.addr3, skb->data, ETH_ALEN);
+		hdrlen = 24;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		/* DA SA BSSID */
+		memcpy(hdr.addr1, skb->data, ETH_ALEN);
+		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
+		memcpy(hdr.addr3, bssid, ETH_ALEN);
+		hdrlen = 24;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (qos) {
+		fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
+		hdrlen += 2;
+	}
+
+	hdr.frame_control = fc;
+	hdr.duration_id = 0;
+	hdr.seq_ctrl = 0;
+
+	skip_header_bytes = ETH_HLEN;
+	if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
+		encaps_data = bridge_tunnel_header;
+		encaps_len = sizeof(bridge_tunnel_header);
+		skip_header_bytes -= 2;
+	} else if (ethertype > 0x600) {
+		encaps_data = rfc1042_header;
+		encaps_len = sizeof(rfc1042_header);
+		skip_header_bytes -= 2;
+	} else {
+		encaps_data = NULL;
+		encaps_len = 0;
+	}
+
+	skb_pull(skb, skip_header_bytes);
+	nh_pos -= skip_header_bytes;
+	h_pos -= skip_header_bytes;
+
+	head_need = hdrlen + encaps_len - skb_headroom(skb);
+
+	if (head_need > 0 || skb_cloned(skb)) {
+		head_need = max(head_need, 0);
+		if (head_need)
+			skb_orphan(skb);
+
+		if (pskb_expand_head(skb, head_need, 0, GFP_ATOMIC)) {
+			printk(KERN_ERR "failed to reallocate Tx buffer\n");
+			return -ENOMEM;
+		}
+		skb->truesize += head_need;
+	}
+
+	if (encaps_data) {
+		memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
+		nh_pos += encaps_len;
+		h_pos += encaps_len;
+	}
+
+	memcpy(skb_push(skb, hdrlen), &hdr, hdrlen);
+
+	nh_pos += hdrlen;
+	h_pos += hdrlen;
+
+	/* Update skb pointers to various headers since this modified frame
+	 * is going to go through Linux networking code that may potentially
+	 * need things like pointer to IP header. */
+	skb_set_mac_header(skb, 0);
+	skb_set_network_header(skb, nh_pos);
+	skb_set_transport_header(skb, h_pos);
+
+	return 0;
+}
+EXPORT_SYMBOL(ieee80211_data_from_8023);
+
+/* Given a data frame determine the 802.1p/1d tag to use. */
+unsigned int cfg80211_classify8021d(struct sk_buff *skb)
+{
+	unsigned int dscp;
+
+	/* skb->priority values from 256->263 are magic values to
+	 * directly indicate a specific 802.1d priority.  This is used
+	 * to allow 802.1d priority to be passed directly in from VLAN
+	 * tags, etc.
+	 */
+	if (skb->priority >= 256 && skb->priority <= 263)
+		return skb->priority - 256;
+
+	switch (skb->protocol) {
+	case htons(ETH_P_IP):
+		dscp = ip_hdr(skb)->tos & 0xfc;
+		break;
+	default:
+		return 0;
+	}
+
+	return dscp >> 5;
+}
+EXPORT_SYMBOL(cfg80211_classify8021d);
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 0fd1db6e95b..d030c531567 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -5,13 +5,14 @@
  * into cfg80211, when that happens all the exports here go away and
  * we directly assign the wireless handlers of wireless interfaces.
  *
- * Copyright 2008	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008-2009	Johannes Berg <johannes@sipsolutions.net>
  */
 
 #include <linux/wireless.h>
 #include <linux/nl80211.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
 #include <net/iw_handler.h>
-#include <net/wireless.h>
 #include <net/cfg80211.h>
 #include "core.h"
 
@@ -57,7 +58,7 @@ int cfg80211_wext_giwname(struct net_device *dev,
 
 	return 0;
 }
-EXPORT_SYMBOL(cfg80211_wext_giwname);
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwname);
 
 int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
 			  u32 *mode, char *extra)
@@ -108,7 +109,7 @@ int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
 
 	return ret;
 }
-EXPORT_SYMBOL(cfg80211_wext_siwmode);
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwmode);
 
 int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
 			  u32 *mode, char *extra)
@@ -143,7 +144,7 @@ int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
 	}
 	return 0;
 }
-EXPORT_SYMBOL(cfg80211_wext_giwmode);
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwmode);
 
 
 int cfg80211_wext_giwrange(struct net_device *dev,
@@ -206,7 +207,6 @@ int cfg80211_wext_giwrange(struct net_device *dev,
 	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
 			  IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
 
-
 	for (band = 0; band < IEEE80211_NUM_BANDS; band ++) {
 		int i;
 		struct ieee80211_supported_band *sband;
@@ -240,4 +240,590 @@ int cfg80211_wext_giwrange(struct net_device *dev,
 
 	return 0;
 }
-EXPORT_SYMBOL(cfg80211_wext_giwrange);
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwrange);
+
+int cfg80211_wext_siwmlme(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *data, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct iw_mlme *mlme = (struct iw_mlme *)extra;
+	struct cfg80211_registered_device *rdev;
+	union {
+		struct cfg80211_disassoc_request disassoc;
+		struct cfg80211_deauth_request deauth;
+	} cmd;
+
+	if (!wdev)
+		return -EOPNOTSUPP;
+
+	rdev = wiphy_to_dev(wdev->wiphy);
+
+	if (wdev->iftype != NL80211_IFTYPE_STATION)
+		return -EINVAL;
+
+	if (mlme->addr.sa_family != ARPHRD_ETHER)
+		return -EINVAL;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	switch (mlme->cmd) {
+	case IW_MLME_DEAUTH:
+		if (!rdev->ops->deauth)
+			return -EOPNOTSUPP;
+		cmd.deauth.peer_addr = mlme->addr.sa_data;
+		cmd.deauth.reason_code = mlme->reason_code;
+		return rdev->ops->deauth(wdev->wiphy, dev, &cmd.deauth);
+	case IW_MLME_DISASSOC:
+		if (!rdev->ops->disassoc)
+			return -EOPNOTSUPP;
+		cmd.disassoc.peer_addr = mlme->addr.sa_data;
+		cmd.disassoc.reason_code = mlme->reason_code;
+		return rdev->ops->disassoc(wdev->wiphy, dev, &cmd.disassoc);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwmlme);
+
+
+/**
+ * cfg80211_wext_freq - get wext frequency for non-"auto"
+ * @wiphy: the wiphy
+ * @freq: the wext freq encoding
+ *
+ * Returns a channel, %NULL for auto, or an ERR_PTR for errors!
+ */
+struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy,
+					     struct iw_freq *freq)
+{
+	struct ieee80211_channel *chan;
+	int f;
+
+	/*
+	 * Parse frequency - return NULL for auto and
+	 * -EINVAL for impossible things.
+	 */
+	if (freq->e == 0) {
+		if (freq->m < 0)
+			return NULL;
+		f = ieee80211_channel_to_frequency(freq->m);
+	} else {
+		int i, div = 1000000;
+		for (i = 0; i < freq->e; i++)
+			div /= 10;
+		if (div <= 0)
+			return ERR_PTR(-EINVAL);
+		f = freq->m / div;
+	}
+
+	/*
+	 * Look up channel struct and return -EINVAL when
+	 * it cannot be found.
+	 */
+	chan = ieee80211_get_channel(wiphy, f);
+	if (!chan)
+		return ERR_PTR(-EINVAL);
+	return chan;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_freq);
+
+int cfg80211_wext_siwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	u32 orts = wdev->wiphy->rts_threshold;
+	int err;
+
+	if (rts->disabled || !rts->fixed)
+		wdev->wiphy->rts_threshold = (u32) -1;
+	else if (rts->value < 0)
+		return -EINVAL;
+	else
+		wdev->wiphy->rts_threshold = rts->value;
+
+	err = rdev->ops->set_wiphy_params(wdev->wiphy,
+					  WIPHY_PARAM_RTS_THRESHOLD);
+	if (err)
+		wdev->wiphy->rts_threshold = orts;
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwrts);
+
+int cfg80211_wext_giwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	rts->value = wdev->wiphy->rts_threshold;
+	rts->disabled = rts->value == (u32) -1;
+	rts->fixed = 1;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwrts);
+
+int cfg80211_wext_siwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	u32 ofrag = wdev->wiphy->frag_threshold;
+	int err;
+
+	if (frag->disabled || !frag->fixed)
+		wdev->wiphy->frag_threshold = (u32) -1;
+	else if (frag->value < 256)
+		return -EINVAL;
+	else {
+		/* Fragment length must be even, so strip LSB. */
+		wdev->wiphy->frag_threshold = frag->value & ~0x1;
+	}
+
+	err = rdev->ops->set_wiphy_params(wdev->wiphy,
+					  WIPHY_PARAM_FRAG_THRESHOLD);
+	if (err)
+		wdev->wiphy->frag_threshold = ofrag;
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwfrag);
+
+int cfg80211_wext_giwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	frag->value = wdev->wiphy->frag_threshold;
+	frag->disabled = frag->value == (u32) -1;
+	frag->fixed = 1;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwfrag);
+
+int cfg80211_wext_siwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	u32 changed = 0;
+	u8 olong = wdev->wiphy->retry_long;
+	u8 oshort = wdev->wiphy->retry_short;
+	int err;
+
+	if (retry->disabled ||
+	    (retry->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT)
+		return -EINVAL;
+
+	if (retry->flags & IW_RETRY_LONG) {
+		wdev->wiphy->retry_long = retry->value;
+		changed |= WIPHY_PARAM_RETRY_LONG;
+	} else if (retry->flags & IW_RETRY_SHORT) {
+		wdev->wiphy->retry_short = retry->value;
+		changed |= WIPHY_PARAM_RETRY_SHORT;
+	} else {
+		wdev->wiphy->retry_short = retry->value;
+		wdev->wiphy->retry_long = retry->value;
+		changed |= WIPHY_PARAM_RETRY_LONG;
+		changed |= WIPHY_PARAM_RETRY_SHORT;
+	}
+
+	if (!changed)
+		return 0;
+
+	err = rdev->ops->set_wiphy_params(wdev->wiphy, changed);
+	if (err) {
+		wdev->wiphy->retry_short = oshort;
+		wdev->wiphy->retry_long = olong;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwretry);
+
+int cfg80211_wext_giwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	retry->disabled = 0;
+
+	if (retry->flags == 0 || (retry->flags & IW_RETRY_SHORT)) {
+		/*
+		 * First return short value, iwconfig will ask long value
+		 * later if needed
+		 */
+		retry->flags |= IW_RETRY_LIMIT;
+		retry->value = wdev->wiphy->retry_short;
+		if (wdev->wiphy->retry_long != wdev->wiphy->retry_short)
+			retry->flags |= IW_RETRY_LONG;
+
+		return 0;
+	}
+
+	if (retry->flags & IW_RETRY_LONG) {
+		retry->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
+		retry->value = wdev->wiphy->retry_long;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwretry);
+
+static int cfg80211_set_encryption(struct cfg80211_registered_device *rdev,
+				   struct net_device *dev, const u8 *addr,
+				   bool remove, bool tx_key, int idx,
+				   struct key_params *params)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	if (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC) {
+		if (!rdev->ops->set_default_mgmt_key)
+			return -EOPNOTSUPP;
+
+		if (idx < 4 || idx > 5)
+			return -EINVAL;
+	} else if (idx < 0 || idx > 3)
+		return -EINVAL;
+
+	if (remove) {
+		err = rdev->ops->del_key(&rdev->wiphy, dev, idx, addr);
+		if (!err) {
+			if (idx == wdev->wext.default_key)
+				wdev->wext.default_key = -1;
+			else if (idx == wdev->wext.default_mgmt_key)
+				wdev->wext.default_mgmt_key = -1;
+		}
+		/*
+		 * Applications using wireless extensions expect to be
+		 * able to delete keys that don't exist, so allow that.
+		 */
+		if (err == -ENOENT)
+			return 0;
+
+		return err;
+	} else {
+		if (addr)
+			tx_key = false;
+
+		if (cfg80211_validate_key_settings(params, idx, addr))
+			return -EINVAL;
+
+		err = rdev->ops->add_key(&rdev->wiphy, dev, idx, addr, params);
+		if (err)
+			return err;
+
+		if (tx_key || (!addr && wdev->wext.default_key == -1)) {
+			err = rdev->ops->set_default_key(&rdev->wiphy,
+							 dev, idx);
+			if (!err)
+				wdev->wext.default_key = idx;
+			return err;
+		}
+
+		if (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC &&
+		    (tx_key || (!addr && wdev->wext.default_mgmt_key == -1))) {
+			err = rdev->ops->set_default_mgmt_key(&rdev->wiphy,
+							      dev, idx);
+			if (!err)
+				wdev->wext.default_mgmt_key = idx;
+			return err;
+		}
+
+		return 0;
+	}
+}
+
+int cfg80211_wext_siwencode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_point *erq, char *keybuf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	int idx, err;
+	bool remove = false;
+	struct key_params params;
+
+	/* no use -- only MFP (set_default_mgmt_key) is optional */
+	if (!rdev->ops->del_key ||
+	    !rdev->ops->add_key ||
+	    !rdev->ops->set_default_key)
+		return -EOPNOTSUPP;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (idx == 0) {
+		idx = wdev->wext.default_key;
+		if (idx < 0)
+			idx = 0;
+	} else if (idx < 1 || idx > 4)
+		return -EINVAL;
+	else
+		idx--;
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		remove = true;
+	else if (erq->length == 0) {
+		/* No key data - just set the default TX key index */
+		err = rdev->ops->set_default_key(&rdev->wiphy, dev, idx);
+		if (!err)
+			wdev->wext.default_key = idx;
+		return err;
+	}
+
+	memset(&params, 0, sizeof(params));
+	params.key = keybuf;
+	params.key_len = erq->length;
+	if (erq->length == 5)
+		params.cipher = WLAN_CIPHER_SUITE_WEP40;
+	else if (erq->length == 13)
+		params.cipher = WLAN_CIPHER_SUITE_WEP104;
+	else if (!remove)
+		return -EINVAL;
+
+	return cfg80211_set_encryption(rdev, dev, NULL, remove,
+				       wdev->wext.default_key == -1,
+				       idx, &params);
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwencode);
+
+int cfg80211_wext_siwencodeext(struct net_device *dev,
+			       struct iw_request_info *info,
+			       struct iw_point *erq, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
+	const u8 *addr;
+	int idx;
+	bool remove = false;
+	struct key_params params;
+	u32 cipher;
+
+	/* no use -- only MFP (set_default_mgmt_key) is optional */
+	if (!rdev->ops->del_key ||
+	    !rdev->ops->add_key ||
+	    !rdev->ops->set_default_key)
+		return -EOPNOTSUPP;
+
+	switch (ext->alg) {
+	case IW_ENCODE_ALG_NONE:
+		remove = true;
+		cipher = 0;
+		break;
+	case IW_ENCODE_ALG_WEP:
+		if (ext->key_len == 5)
+			cipher = WLAN_CIPHER_SUITE_WEP40;
+		else if (ext->key_len == 13)
+			cipher = WLAN_CIPHER_SUITE_WEP104;
+		else
+			return -EINVAL;
+		break;
+	case IW_ENCODE_ALG_TKIP:
+		cipher = WLAN_CIPHER_SUITE_TKIP;
+		break;
+	case IW_ENCODE_ALG_CCMP:
+		cipher = WLAN_CIPHER_SUITE_CCMP;
+		break;
+	case IW_ENCODE_ALG_AES_CMAC:
+		cipher = WLAN_CIPHER_SUITE_AES_CMAC;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (erq->flags & IW_ENCODE_DISABLED)
+		remove = true;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (cipher == WLAN_CIPHER_SUITE_AES_CMAC) {
+		if (idx < 4 || idx > 5) {
+			idx = wdev->wext.default_mgmt_key;
+			if (idx < 0)
+				return -EINVAL;
+		} else
+			idx--;
+	} else {
+		if (idx < 1 || idx > 4) {
+			idx = wdev->wext.default_key;
+			if (idx < 0)
+				return -EINVAL;
+		} else
+			idx--;
+	}
+
+	addr = ext->addr.sa_data;
+	if (is_broadcast_ether_addr(addr))
+		addr = NULL;
+
+	memset(&params, 0, sizeof(params));
+	params.key = ext->key;
+	params.key_len = ext->key_len;
+	params.cipher = cipher;
+
+	if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
+		params.seq = ext->rx_seq;
+		params.seq_len = 6;
+	}
+
+	return cfg80211_set_encryption(
+			rdev, dev, addr, remove,
+			ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
+			idx, &params);
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwencodeext);
+
+struct giwencode_cookie {
+	size_t buflen;
+	char *keybuf;
+};
+
+static void giwencode_get_key_cb(void *cookie, struct key_params *params)
+{
+	struct giwencode_cookie *data = cookie;
+
+	if (!params->key) {
+		data->buflen = 0;
+		return;
+	}
+
+	data->buflen = min_t(size_t, data->buflen, params->key_len);
+	memcpy(data->keybuf, params->key, data->buflen);
+}
+
+int cfg80211_wext_giwencode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    struct iw_point *erq, char *keybuf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	int idx, err;
+	struct giwencode_cookie data = {
+		.keybuf = keybuf,
+		.buflen = erq->length,
+	};
+
+	if (!rdev->ops->get_key)
+		return -EOPNOTSUPP;
+
+	idx = erq->flags & IW_ENCODE_INDEX;
+	if (idx == 0) {
+		idx = wdev->wext.default_key;
+		if (idx < 0)
+			idx = 0;
+	} else if (idx < 1 || idx > 4)
+		return -EINVAL;
+	else
+		idx--;
+
+	erq->flags = idx + 1;
+
+	err = rdev->ops->get_key(&rdev->wiphy, dev, idx, NULL, &data,
+				 giwencode_get_key_cb);
+	if (!err) {
+		erq->length = data.buflen;
+		erq->flags |= IW_ENCODE_ENABLED;
+		return 0;
+	}
+
+	if (err == -ENOENT) {
+		erq->flags |= IW_ENCODE_DISABLED;
+		erq->length = 0;
+		return 0;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwencode);
+
+int cfg80211_wext_siwtxpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	enum tx_power_setting type;
+	int dbm = 0;
+
+	if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
+		return -EINVAL;
+	if (data->txpower.flags & IW_TXPOW_RANGE)
+		return -EINVAL;
+
+	if (!rdev->ops->set_tx_power)
+		return -EOPNOTSUPP;
+
+	/* only change when not disabling */
+	if (!data->txpower.disabled) {
+		rfkill_set_sw_state(rdev->rfkill, false);
+
+		if (data->txpower.fixed) {
+			/*
+			 * wext doesn't support negative values, see
+			 * below where it's for automatic
+			 */
+			if (data->txpower.value < 0)
+				return -EINVAL;
+			dbm = data->txpower.value;
+			type = TX_POWER_FIXED;
+			/* TODO: do regulatory check! */
+		} else {
+			/*
+			 * Automatic power level setting, max being the value
+			 * passed in from userland.
+			 */
+			if (data->txpower.value < 0) {
+				type = TX_POWER_AUTOMATIC;
+			} else {
+				dbm = data->txpower.value;
+				type = TX_POWER_LIMITED;
+			}
+		}
+	} else {
+		rfkill_set_sw_state(rdev->rfkill, true);
+		schedule_work(&rdev->rfkill_sync);
+		return 0;
+	}
+
+	return rdev->ops->set_tx_power(wdev->wiphy, type, dbm);;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwtxpower);
+
+int cfg80211_wext_giwtxpower(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *data, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	int err, val;
+
+	if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
+		return -EINVAL;
+	if (data->txpower.flags & IW_TXPOW_RANGE)
+		return -EINVAL;
+
+	if (!rdev->ops->get_tx_power)
+		return -EOPNOTSUPP;
+
+	err = rdev->ops->get_tx_power(wdev->wiphy, &val);
+	if (err)
+		return err;
+
+	/* well... oh well */
+	data->txpower.fixed = 1;
+	data->txpower.disabled = rfkill_blocked(rdev->rfkill);
+	data->txpower.value = val;
+	data->txpower.flags = IW_TXPOW_DBM;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwtxpower);
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
index 0e59f9ae9b8..252c2010c2e 100644
--- a/net/wireless/wext.c
+++ b/net/wireless/wext.c
@@ -636,8 +636,10 @@ static void wireless_seq_printf_stats(struct seq_file *seq,
 /*
  * Print info for /proc/net/wireless (print all entries)
  */
-static int wireless_seq_show(struct seq_file *seq, void *v)
+static int wireless_dev_seq_show(struct seq_file *seq, void *v)
 {
+	might_sleep();
+
 	if (v == SEQ_START_TOKEN)
 		seq_printf(seq, "Inter-| sta-|   Quality        |   Discarded "
 				"packets               | Missed | WE\n"
@@ -649,14 +651,46 @@ static int wireless_seq_show(struct seq_file *seq, void *v)
 	return 0;
 }
 
+static void *wireless_dev_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct net *net = seq_file_net(seq);
+	loff_t off;
+	struct net_device *dev;
+
+	rtnl_lock();
+	if (!*pos)
+		return SEQ_START_TOKEN;
+
+	off = 1;
+	for_each_netdev(net, dev)
+		if (off++ == *pos)
+			return dev;
+	return NULL;
+}
+
+static void *wireless_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct net *net = seq_file_net(seq);
+
+	++*pos;
+
+	return v == SEQ_START_TOKEN ?
+		first_net_device(net) : next_net_device(v);
+}
+
+static void wireless_dev_seq_stop(struct seq_file *seq, void *v)
+{
+	rtnl_unlock();
+}
+
 static const struct seq_operations wireless_seq_ops = {
-	.start = dev_seq_start,
-	.next  = dev_seq_next,
-	.stop  = dev_seq_stop,
-	.show  = wireless_seq_show,
+	.start = wireless_dev_seq_start,
+	.next  = wireless_dev_seq_next,
+	.stop  = wireless_dev_seq_stop,
+	.show  = wireless_dev_seq_show,
 };
 
-static int wireless_seq_open(struct inode *inode, struct file *file)
+static int seq_open_wireless(struct inode *inode, struct file *file)
 {
 	return seq_open_net(inode, file, &wireless_seq_ops,
 			    sizeof(struct seq_net_private));
@@ -664,7 +698,7 @@ static int wireless_seq_open(struct inode *inode, struct file *file)
 
 static const struct file_operations wireless_seq_fops = {
 	.owner	 = THIS_MODULE,
-	.open    = wireless_seq_open,
+	.open    = seq_open_wireless,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
 	.release = seq_release_net,
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index 96036cf2216..d31ccb48773 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -696,8 +696,9 @@ int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
 {
 	int start = skb_headlen(skb);
 	int i, copy = start - offset;
-	int err;
+	struct sk_buff *frag_iter;
 	struct scatterlist sg;
+	int err;
 
 	/* Checksum header. */
 	if (copy > 0) {
@@ -742,28 +743,24 @@ int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
 		start = end;
 	}
 
-	if (skb_shinfo(skb)->frag_list) {
-		struct sk_buff *list = skb_shinfo(skb)->frag_list;
-
-		for (; list; list = list->next) {
-			int end;
-
-			WARN_ON(start > offset + len);
-
-			end = start + list->len;
-			if ((copy = end - offset) > 0) {
-				if (copy > len)
-					copy = len;
-				err = skb_icv_walk(list, desc, offset-start,
-						   copy, icv_update);
-				if (unlikely(err))
-					return err;
-				if ((len -= copy) == 0)
-					return 0;
-				offset += copy;
-			}
-			start = end;
+	skb_walk_frags(skb, frag_iter) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + frag_iter->len;
+		if ((copy = end - offset) > 0) {
+			if (copy > len)
+				copy = len;
+			err = skb_icv_walk(frag_iter, desc, offset-start,
+					   copy, icv_update);
+			if (unlikely(err))
+				return err;
+			if ((len -= copy) == 0)
+				return 0;
+			offset += copy;
 		}
+		start = end;
 	}
 	BUG_ON(len);
 	return 0;
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index b4a13178fb4..e0009c17d80 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -251,8 +251,7 @@ resume:
 	nf_reset(skb);
 
 	if (decaps) {
-		dst_release(skb->dst);
-		skb->dst = NULL;
+		skb_dst_drop(skb);
 		netif_rx(skb);
 		return 0;
 	} else {
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index c235597ba8d..b9fe13138c0 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -22,7 +22,7 @@ static int xfrm_output2(struct sk_buff *skb);
 
 static int xfrm_state_check_space(struct xfrm_state *x, struct sk_buff *skb)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	int nhead = dst->header_len + LL_RESERVED_SPACE(dst->dev)
 		- skb_headroom(skb);
 	int ntail = dst->dev->needed_tailroom - skb_tailroom(skb);
@@ -39,7 +39,7 @@ static int xfrm_state_check_space(struct xfrm_state *x, struct sk_buff *skb)
 
 static int xfrm_output_one(struct sk_buff *skb, int err)
 {
-	struct dst_entry *dst = skb->dst;
+	struct dst_entry *dst = skb_dst(skb);
 	struct xfrm_state *x = dst->xfrm;
 	struct net *net = xs_net(x);
 
@@ -94,12 +94,13 @@ resume:
 			goto error_nolock;
 		}
 
-		if (!(skb->dst = dst_pop(dst))) {
+		dst = dst_pop(dst);
+		if (!dst) {
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTERROR);
 			err = -EHOSTUNREACH;
 			goto error_nolock;
 		}
-		dst = skb->dst;
+		skb_dst_set(skb, dst);
 		x = dst->xfrm;
 	} while (x && !(x->outer_mode->flags & XFRM_MODE_FLAG_TUNNEL));
 
@@ -119,16 +120,16 @@ int xfrm_output_resume(struct sk_buff *skb, int err)
 	while (likely((err = xfrm_output_one(skb, err)) == 0)) {
 		nf_reset(skb);
 
-		err = skb->dst->ops->local_out(skb);
+		err = skb_dst(skb)->ops->local_out(skb);
 		if (unlikely(err != 1))
 			goto out;
 
-		if (!skb->dst->xfrm)
+		if (!skb_dst(skb)->xfrm)
 			return dst_output(skb);
 
-		err = nf_hook(skb->dst->ops->family,
+		err = nf_hook(skb_dst(skb)->ops->family,
 			      NF_INET_POST_ROUTING, skb,
-			      NULL, skb->dst->dev, xfrm_output2);
+			      NULL, skb_dst(skb)->dev, xfrm_output2);
 		if (unlikely(err != 1))
 			goto out;
 	}
@@ -179,7 +180,7 @@ static int xfrm_output_gso(struct sk_buff *skb)
 
 int xfrm_output(struct sk_buff *skb)
 {
-	struct net *net = dev_net(skb->dst->dev);
+	struct net *net = dev_net(skb_dst(skb)->dev);
 	int err;
 
 	if (skb_is_gso(skb))
@@ -202,7 +203,7 @@ int xfrm_inner_extract_output(struct xfrm_state *x, struct sk_buff *skb)
 	struct xfrm_mode *inner_mode;
 	if (x->sel.family == AF_UNSPEC)
 		inner_mode = xfrm_ip2inner_mode(x,
-				xfrm_af2proto(skb->dst->ops->family));
+				xfrm_af2proto(skb_dst(skb)->ops->family));
 	else
 		inner_mode = x->inner_mode;
 
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 9c068ab3a83..cb81ca35b0d 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2027,6 +2027,8 @@ int __xfrm_route_forward(struct sk_buff *skb, unsigned short family)
 {
 	struct net *net = dev_net(skb->dev);
 	struct flowi fl;
+	struct dst_entry *dst;
+	int res;
 
 	if (xfrm_decode_session(skb, &fl, family) < 0) {
 		/* XXX: we should have something like FWDHDRERROR here. */
@@ -2034,7 +2036,11 @@ int __xfrm_route_forward(struct sk_buff *skb, unsigned short family)
 		return 0;
 	}
 
-	return xfrm_lookup(net, &skb->dst, &fl, NULL, 0) == 0;
+	dst = skb_dst(skb);
+
+	res = xfrm_lookup(net, &dst, &fl, NULL, 0) == 0;
+	skb_dst_set(skb, dst);
+	return res;
 }
 EXPORT_SYMBOL(__xfrm_route_forward);
 
diff --git a/samples/Kconfig b/samples/Kconfig
index b75d28cba3f..428b065ba69 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -26,7 +26,8 @@ config SAMPLE_TRACE_EVENTS
 	  This build trace event example modules.
 
 config SAMPLE_KOBJECT
-	tristate "Build kobject examples"
+	tristate "Build kobject examples -- loadable modules only"
+	depends on m
 	help
 	  This config option will allow you to build a number of
 	  different kobject sample modules showing how to use kobjects,
diff --git a/samples/firmware_class/firmware_sample_driver.c b/samples/firmware_class/firmware_sample_driver.c
deleted file mode 100644
index 219a2989660..00000000000
--- a/samples/firmware_class/firmware_sample_driver.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * firmware_sample_driver.c -
- *
- * Copyright (c) 2003 Manuel Estrada Sainz
- *
- * Sample code on how to use request_firmware() from drivers.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/string.h>
-#include <linux/firmware.h>
-
-static struct device ghost_device = {
-	.bus_id    = "ghost0",
-};
-
-
-static void sample_firmware_load(char *firmware, int size)
-{
-	u8 buf[size+1];
-	memcpy(buf, firmware, size);
-	buf[size] = '\0';
-	printk(KERN_INFO "firmware_sample_driver: firmware: %s\n", buf);
-}
-
-static void sample_probe_default(void)
-{
-	/* uses the default method to get the firmware */
-	const struct firmware *fw_entry;
-	int retval;
-
-	printk(KERN_INFO "firmware_sample_driver: "
-		"a ghost device got inserted :)\n");
-
-	retval = request_firmware(&fw_entry, "sample_driver_fw", &ghost_device);
-	if (retval) {
-		printk(KERN_ERR
-		       "firmware_sample_driver: Firmware not available\n");
-		return;
-	}
-
-	sample_firmware_load(fw_entry->data, fw_entry->size);
-
-	release_firmware(fw_entry);
-
-	/* finish setting up the device */
-}
-
-static void sample_probe_specific(void)
-{
-	int retval;
-	/* Uses some specific hotplug support to get the firmware from
-	 * userspace  directly into the hardware, or via some sysfs file */
-
-	/* NOTE: This currently doesn't work */
-
-	printk(KERN_INFO "firmware_sample_driver: "
-		"a ghost device got inserted :)\n");
-
-	retval = request_firmware(NULL, "sample_driver_fw", &ghost_device);
-	if (retval) {
-		printk(KERN_ERR
-		       "firmware_sample_driver: Firmware load failed\n");
-		return;
-	}
-
-	/* request_firmware blocks until userspace finished, so at
-	 * this point the firmware should be already in the device */
-
-	/* finish setting up the device */
-}
-
-static void sample_probe_async_cont(const struct firmware *fw, void *context)
-{
-	if (!fw) {
-		printk(KERN_ERR
-		       "firmware_sample_driver: firmware load failed\n");
-		return;
-	}
-
-	printk(KERN_INFO "firmware_sample_driver: device pointer \"%s\"\n",
-	       (char *)context);
-	sample_firmware_load(fw->data, fw->size);
-}
-
-static void sample_probe_async(void)
-{
-	/* Let's say that I can't sleep */
-	int error;
-	error = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG,
-					"sample_driver_fw", &ghost_device,
-					"my device pointer",
-					sample_probe_async_cont);
-	if (error)
-		printk(KERN_ERR "firmware_sample_driver:"
-		       " request_firmware_nowait failed\n");
-}
-
-static int __init sample_init(void)
-{
-	device_initialize(&ghost_device);
-	/* since there is no real hardware insertion I just call the
-	 * sample probe functions here */
-	sample_probe_specific();
-	sample_probe_default();
-	sample_probe_async();
-	return 0;
-}
-
-static void __exit sample_exit(void)
-{
-}
-
-module_init(sample_init);
-module_exit(sample_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/samples/firmware_class/firmware_sample_firmware_class.c b/samples/firmware_class/firmware_sample_firmware_class.c
deleted file mode 100644
index e6cf7a43a29..00000000000
--- a/samples/firmware_class/firmware_sample_firmware_class.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * firmware_sample_firmware_class.c -
- *
- * Copyright (c) 2003 Manuel Estrada Sainz
- *
- * NOTE: This is just a probe of concept, if you think that your driver would
- * be well served by this mechanism please contact me first.
- *
- * DON'T USE THIS CODE AS IS
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/firmware.h>
-
-
-MODULE_AUTHOR("Manuel Estrada Sainz");
-MODULE_DESCRIPTION("Hackish sample for using firmware class directly");
-MODULE_LICENSE("GPL");
-
-static inline struct class_device *to_class_dev(struct kobject *obj)
-{
-	return container_of(obj, struct class_device, kobj);
-}
-
-static inline
-struct class_device_attribute *to_class_dev_attr(struct attribute *_attr)
-{
-	return container_of(_attr, struct class_device_attribute, attr);
-}
-
-struct firmware_priv {
-	char fw_id[FIRMWARE_NAME_MAX];
-	s32 loading:2;
-	u32 abort:1;
-};
-
-static ssize_t firmware_loading_show(struct class_device *class_dev, char *buf)
-{
-	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-	return sprintf(buf, "%d\n", fw_priv->loading);
-}
-
-static ssize_t firmware_loading_store(struct class_device *class_dev,
-				      const char *buf, size_t count)
-{
-	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-	int prev_loading = fw_priv->loading;
-
-	fw_priv->loading = simple_strtol(buf, NULL, 10);
-
-	switch (fw_priv->loading) {
-	case -1:
-		/* abort load an panic */
-		break;
-	case 1:
-		/* setup load */
-		break;
-	case 0:
-		if (prev_loading == 1) {
-			/* finish load and get the device back to working
-			 * state */
-		}
-		break;
-	}
-
-	return count;
-}
-static CLASS_DEVICE_ATTR(loading, 0644,
-			 firmware_loading_show, firmware_loading_store);
-
-static ssize_t firmware_data_read(struct kobject *kobj,
-				  struct bin_attribute *bin_attr,
-				  char *buffer, loff_t offset, size_t count)
-{
-	struct class_device *class_dev = to_class_dev(kobj);
-	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-
-	/* read from the devices firmware memory */
-
-	return count;
-}
-static ssize_t firmware_data_write(struct kobject *kobj,
-				   struct bin_attribute *bin_attr,
-				   char *buffer, loff_t offset, size_t count)
-{
-	struct class_device *class_dev = to_class_dev(kobj);
-	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-
-	/* write to the devices firmware memory */
-
-	return count;
-}
-static struct bin_attribute firmware_attr_data = {
-	.attr = {.name = "data", .mode = 0644},
-	.size = 0,
-	.read = firmware_data_read,
-	.write = firmware_data_write,
-};
-static int fw_setup_class_device(struct class_device *class_dev,
-				 const char *fw_name,
-				 struct device *device)
-{
-	int retval;
-	struct firmware_priv *fw_priv;
-
-	fw_priv = kzalloc(sizeof(struct firmware_priv),	GFP_KERNEL);
-	if (!fw_priv) {
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	memset(class_dev, 0, sizeof(*class_dev));
-
-	strncpy(fw_priv->fw_id, fw_name, FIRMWARE_NAME_MAX);
-	fw_priv->fw_id[FIRMWARE_NAME_MAX-1] = '\0';
-
-	strncpy(class_dev->class_id, device->bus_id, BUS_ID_SIZE);
-	class_dev->class_id[BUS_ID_SIZE-1] = '\0';
-	class_dev->dev = device;
-
-	class_dev->class = &firmware_class;
-	class_set_devdata(class_dev, fw_priv);
-	retval = class_device_register(class_dev);
-	if (retval) {
-		printk(KERN_ERR "%s: class_device_register failed\n",
-		       __func__);
-		goto error_free_fw_priv;
-	}
-
-	retval = sysfs_create_bin_file(&class_dev->kobj, &firmware_attr_data);
-	if (retval) {
-		printk(KERN_ERR "%s: sysfs_create_bin_file failed\n",
-		       __func__);
-		goto error_unreg_class_dev;
-	}
-
-	retval = class_device_create_file(class_dev,
-					  &class_device_attr_loading);
-	if (retval) {
-		printk(KERN_ERR "%s: class_device_create_file failed\n",
-		       __func__);
-		goto error_remove_data;
-	}
-
-	goto out;
-
-error_remove_data:
-	sysfs_remove_bin_file(&class_dev->kobj, &firmware_attr_data);
-error_unreg_class_dev:
-	class_device_unregister(class_dev);
-error_free_fw_priv:
-	kfree(fw_priv);
-out:
-	return retval;
-}
-static void fw_remove_class_device(struct class_device *class_dev)
-{
-	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-
-	class_device_remove_file(class_dev, &class_device_attr_loading);
-	sysfs_remove_bin_file(&class_dev->kobj, &firmware_attr_data);
-	class_device_unregister(class_dev);
-}
-
-static struct class_device *class_dev;
-
-static struct device my_device = {
-	.bus_id    = "my_dev0",
-};
-
-static int __init firmware_sample_init(void)
-{
-	int error;
-
-	device_initialize(&my_device);
-	class_dev = kmalloc(sizeof(struct class_device), GFP_KERNEL);
-	if (!class_dev)
-		return -ENOMEM;
-
-	error = fw_setup_class_device(class_dev, "my_firmware_image",
-				      &my_device);
-	if (error) {
-		kfree(class_dev);
-		return error;
-	}
-	return 0;
-
-}
-static void __exit firmware_sample_exit(void)
-{
-	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
-	fw_remove_class_device(class_dev);
-	kfree(fw_priv);
-	kfree(class_dev);
-}
-
-module_init(firmware_sample_init);
-module_exit(firmware_sample_exit);
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 095cfc8b9db..0fcd8383877 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -54,8 +54,12 @@ quiet_cmd_remove = REMOVE  $(unwanted)
       cmd_remove = rm -f $(unwanted-file)
 
 quiet_cmd_check = CHECK   $(printdir) ($(words $(all-files)) files)
-      cmd_check = $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH) \
-                  $(addprefix $(install)/, $(all-files));           \
+# Headers list can be pretty long, xargs helps to avoid
+# the "Argument list too long" error.
+      cmd_check = for f in $(all-files); do                          \
+                  echo "$(install)/$${f}"; done                      \
+                  | xargs                                            \
+                  $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH); \
 	          touch $@
 
 PHONY += __headersinst __headerscheck
diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c
index 35bdc68b6e6..4c9523ef9c0 100644
--- a/scripts/basic/docproc.c
+++ b/scripts/basic/docproc.c
@@ -69,7 +69,7 @@ FILELINE * docsection;
 #define NOFUNCTION    "-nofunction"
 #define NODOCSECTIONS "-no-doc-sections"
 
-char *srctree;
+static char *srctree, *kernsrctree;
 
 void usage (void)
 {
@@ -77,7 +77,8 @@ void usage (void)
 	fprintf(stderr, "Input is read from file.tmpl. Output is sent to stdout\n");
 	fprintf(stderr, "doc: frontend when generating kernel documentation\n");
 	fprintf(stderr, "depend: generate list of files referenced within file\n");
-	fprintf(stderr, "Environment variable SRCTREE: absolute path to kernel source tree.\n");
+	fprintf(stderr, "Environment variable SRCTREE: absolute path to sources.\n");
+	fprintf(stderr, "                     KBUILD_SRC: absolute path to kernel source tree.\n");
 }
 
 /*
@@ -96,8 +97,8 @@ void exec_kernel_doc(char **svec)
 			exit(1);
 		case  0:
 			memset(real_filename, 0, sizeof(real_filename));
-			strncat(real_filename, srctree, PATH_MAX);
-			strncat(real_filename, KERNELDOCPATH KERNELDOC,
+			strncat(real_filename, kernsrctree, PATH_MAX);
+			strncat(real_filename, "/" KERNELDOCPATH KERNELDOC,
 					PATH_MAX - strlen(real_filename));
 			execvp(real_filename, svec);
 			fprintf(stderr, "exec ");
@@ -178,6 +179,7 @@ void find_export_symbols(char * filename)
 		char real_filename[PATH_MAX + 1];
 		memset(real_filename, 0, sizeof(real_filename));
 		strncat(real_filename, srctree, PATH_MAX);
+		strncat(real_filename, "/", PATH_MAX - strlen(real_filename));
 		strncat(real_filename, filename,
 				PATH_MAX - strlen(real_filename));
 		sym = add_new_file(filename);
@@ -382,6 +384,9 @@ int main(int argc, char *argv[])
 	srctree = getenv("SRCTREE");
 	if (!srctree)
 		srctree = getcwd(NULL, 0);
+	kernsrctree = getenv("KBUILD_SRC");
+	if (!kernsrctree)
+		kernsrctree = srctree;
 	if (argc != 3) {
 		usage();
 		exit(1);
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index 8912c0f5460..72c15205bb2 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -373,10 +373,11 @@ void print_deps(void)
 void traps(void)
 {
 	static char test[] __attribute__((aligned(sizeof(int)))) = "CONF";
+	int *p = (int *)test;
 
-	if (*(int *)test != INT_CONF) {
+	if (*p != INT_CONF) {
 		fprintf(stderr, "fixdep: sizeof(int) != 4 or wrong endianess? %#x\n",
-			*(int *)test);
+			*p);
 		exit(2);
 	}
 }
diff --git a/scripts/config b/scripts/config
index db6084b78a1..608d7fdb13e 100755
--- a/scripts/config
+++ b/scripts/config
@@ -9,8 +9,10 @@ config options command ...
 commands:
 	--enable|-e option   Enable option
 	--disable|-d option  Disable option
-	--module|-m option      Turn option into a module
-	--state|-s option       Print state of option (n,y,m,undef)
+	--module|-m option   Turn option into a module
+	--set-str option value
+	                     Set option to "value"
+	--state|-s option    Print state of option (n,y,m,undef)
 
 	--enable-after|-E beforeopt option
                              Enable option directly after other option
@@ -26,8 +28,6 @@ options:
 
 config doesn't check the validity of the .config file. This is done at next
  make time.
-The options need to be already in the file before they can be changed,
-but sometimes you can cheat with the --*-after options.
 EOL
 	exit 1
 }
@@ -45,8 +45,18 @@ checkarg() {
 	ARG="`echo $ARG | tr a-z A-Z`"
 }
 
-replace() {
-	sed -i -e "$@" $FN
+set_var() {
+	local name=$1 new=$2 before=$3
+
+	name_re="^($name=|# $name is not set)"
+	before_re="^($before=|# $before is not set)"
+	if test -n "$before" && grep -Eq "$before_re" "$FN"; then
+		sed -ri "/$before_re/a $new" "$FN"
+	elif grep -Eq "$name_re" "$FN"; then
+		sed -ri "s:$name_re.*:$new:" "$FN"
+	else
+		echo "$new" >>"$FN"
+	fi
 }
 
 if [ "$1" = "--file" ]; then
@@ -54,8 +64,7 @@ if [ "$1" = "--file" ]; then
 	if [ "$FN" = "" ] ; then
 		usage
 	fi
-	shift
-	shift
+	shift 2
 else
 	FN=.config
 fi
@@ -68,27 +77,39 @@ while [ "$1" != "" ] ; do
 	CMD="$1"
 	shift
 	case "$CMD" in
-	--enable|-e)
+	--refresh)
+		;;
+	--*-after)
+		checkarg "$1"
+		A=$ARG
+		checkarg "$2"
+		B=$ARG
+		shift 2
+		;;
+	--*)
 		checkarg "$1"
-		replace "s/# CONFIG_$ARG is not set/CONFIG_$ARG=y/"
 		shift
 		;;
+	esac
+	case "$CMD" in
+	--enable|-e)
+		set_var "CONFIG_$ARG" "CONFIG_$ARG=y"
+		;;
 
 	--disable|-d)
-		checkarg "$1"
-		replace "s/CONFIG_$ARG=[my]/# CONFIG_$ARG is not set/"
-		shift
+		set_var "CONFIG_$ARG" "# CONFIG_$ARG is not set"
 		;;
 
 	--module|-m)
-		checkarg "$1"
-		replace "s/CONFIG_$ARG=y/CONFIG_$ARG=m/" \
-			-e "s/# CONFIG_$ARG is not set/CONFIG_$ARG=m/"
+		set_var "CONFIG_$ARG" "CONFIG_$ARG=m"
+		;;
+
+	--set-str)
+		set_var "CONFIG_$ARG" "CONFIG_$ARG=\"$1\""
 		shift
 		;;
 
 	--state|-s)
-		checkarg "$1"
 		if grep -q "# CONFIG_$ARG is not set" $FN ; then
 			echo n
 		else
@@ -101,44 +122,18 @@ while [ "$1" != "" ] ; do
 				echo "$V"
 			fi
 		fi
-		shift
 		;;
 
 	--enable-after|-E)
-		checkarg "$1"
-		A=$ARG
-		checkarg "$2"
-		B=$ARG
-		replace "/CONFIG_$A=[my]/aCONFIG_$B=y" \
-			-e "/# CONFIG_$ARG is not set/a/CONFIG_$ARG=y" \
-			-e "s/# CONFIG_$ARG is not set/CONFIG_$ARG=y/"
-		shift
-		shift
+		set_var "CONFIG_$B" "CONFIG_$B=y" "CONFIG_$A"
 		;;
 
 	--disable-after|-D)
-		checkarg "$1"
-		A=$ARG
-		checkarg "$2"
-		B=$ARG
-		replace "/CONFIG_$A=[my]/a# CONFIG_$B is not set" \
-		-e "/# CONFIG_$ARG is not set/a/# CONFIG_$ARG is not set" \
-		-e "s/CONFIG_$ARG=[my]/# CONFIG_$ARG is not set/"
-		shift
-		shift
+		set_var "CONFIG_$B" "# CONFIG_$B is not set" "CONFIG_$A"
 		;;
 
 	--module-after|-M)
-		checkarg "$1"
-		A=$ARG
-		checkarg "$2"
-		B=$ARG
-		replace "/CONFIG_$A=[my]/aCONFIG_$B=m" \
-			-e "/# CONFIG_$ARG is not set/a/CONFIG_$ARG=m" \
-			-e "s/CONFIG_$ARG=y/CONFIG_$ARG=m/" \
-			-e "s/# CONFIG_$ARG is not set/CONFIG_$ARG=m/"
-		shift
-		shift
+		set_var "CONFIG_$B" "CONFIG_$B=m" "CONFIG_$A"
 		;;
 
 	# undocumented because it ignores --file (fixme)
diff --git a/scripts/gcc-version.sh b/scripts/gcc-version.sh
index cc767b388ba..debecb5561c 100644
--- a/scripts/gcc-version.sh
+++ b/scripts/gcc-version.sh
@@ -18,7 +18,7 @@ compiler="$*"
 
 if [ ${#compiler} -eq 0 ]; then
 	echo "Error: No compiler specified."
-	echo -e "Usage:\n\t$0 <gcc-command>"
+	printf "Usage:\n\t$0 <gcc-command>\n"
 	exit 1
 fi
 
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 60dc0c48c92..3e733146cd5 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
 use strict;
 
 my $P = $0;
-my $V = '0.15';
+my $V = '0.16';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -55,6 +55,10 @@ foreach my $chief (@penguin_chief) {
 }
 my $penguin_chiefs = "\(" . join("|",@penguin_chief_names) . "\)";
 
+# rfc822 email address - preloaded methods go here.
+my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])";
+my $rfc822_char = '[\\000-\\377]';
+
 if (!GetOptions(
 		'email!' => \$email,
 		'git!' => \$email_git,
@@ -161,7 +165,7 @@ foreach my $file (@ARGV) {
 	}
 	close(PATCH);
 	if ($file_cnt == @files) {
-	    die "$P: file '${file}' doesn't appear to be a patch.  "
+	    warn "$P: file '${file}' doesn't appear to be a patch.  "
 		. "Add -f to options?\n";
 	}
 	@files = sort_and_uniq(@files);
@@ -169,6 +173,7 @@ foreach my $file (@ARGV) {
 }
 
 my @email_to = ();
+my @list_to = ();
 my @scm = ();
 my @web = ();
 my @subsystem = ();
@@ -182,7 +187,7 @@ foreach my $file (@files) {
 
     my $exclude = 0;
     foreach my $line (@typevalue) {
-	if ($line =~ m/^(\C):(.*)/) {
+	if ($line =~ m/^(\C):\s*(.*)/) {
 	    my $type = $1;
 	    my $value = $2;
 	    if ($type eq 'X') {
@@ -196,7 +201,7 @@ foreach my $file (@files) {
     if (!$exclude) {
 	my $tvi = 0;
 	foreach my $line (@typevalue) {
-	    if ($line =~ m/^(\C):(.*)/) {
+	    if ($line =~ m/^(\C):\s*(.*)/) {
 		my $type = $1;
 		my $value = $2;
 		if ($type eq 'F') {
@@ -215,29 +220,33 @@ foreach my $file (@files) {
 
 }
 
-if ($email_git_penguin_chiefs) {
+if ($email) {
     foreach my $chief (@penguin_chief) {
 	if ($chief =~ m/^(.*):(.*)/) {
-	    my $chief_name = $1;
-	    my $chief_addr = $2;
+	    my $email_address;
 	    if ($email_usename) {
-		push(@email_to, format_email($chief_name, $chief_addr));
+		$email_address = format_email($1, $2);
+	    } else {
+		$email_address = $2;
+	    }
+	    if ($email_git_penguin_chiefs) {
+		push(@email_to, $email_address);
 	    } else {
-		push(@email_to, $chief_addr);
+		@email_to = grep(!/${email_address}/, @email_to);
 	    }
 	}
     }
 }
 
-if ($email) {
-    my $address_cnt = @email_to;
-    if ($address_cnt == 0 && $email_list) {
-	push(@email_to, "linux-kernel\@vger.kernel.org");
+if ($email || $email_list) {
+    my @to = ();
+    if ($email) {
+	@to = (@to, @email_to);
     }
-
-#Don't sort email address list, but do remove duplicates
-    @email_to = uniq(@email_to);
-    output(@email_to);
+    if ($email_list) {
+	@to = (@to, @list_to);
+    }
+    output(uniq(@to));
 }
 
 if ($scm) {
@@ -307,10 +316,10 @@ Output type options:
   --multiline => print 1 entry per line
 
 Default options:
-  [--email --git --m --l --multiline]
+  [--email --git --m --n --l --multiline]
 
 Other options:
-  --version -> show version
+  --version => show version
   --help => show this help information
 
 EOT
@@ -347,6 +356,7 @@ sub format_email {
     my ($name, $email) = @_;
 
     $name =~ s/^\s+|\s+$//g;
+    $name =~ s/^\"|\"$//g;
     $email =~ s/^\s+|\s+$//g;
 
     my $formatted_email = "";
@@ -366,36 +376,41 @@ sub add_categories {
     $index = $index - 1;
     while ($index >= 0) {
 	my $tv = $typevalue[$index];
-	if ($tv =~ m/^(\C):(.*)/) {
+	if ($tv =~ m/^(\C):\s*(.*)/) {
 	    my $ptype = $1;
 	    my $pvalue = $2;
 	    if ($ptype eq "L") {
-		my $subscr = $pvalue;
-		if ($subscr =~ m/\s*\(subscribers-only\)/) {
+		my $list_address = $pvalue;
+		my $list_additional = "";
+		if ($list_address =~ m/([^\s]+)\s+(.*)$/) {
+		    $list_address = $1;
+		    $list_additional = $2;
+		}
+		if ($list_additional =~ m/subscribers-only/) {
 		    if ($email_subscriber_list) {
-			$subscr =~ s/\s*\(subscribers-only\)//g;
-			push(@email_to, $subscr);
+			push(@list_to, $list_address);
 		    }
 		} else {
 		    if ($email_list) {
-			push(@email_to, $pvalue);
+			push(@list_to, $list_address);
 		    }
 		}
 	    } elsif ($ptype eq "M") {
-		if ($email_maintainer) {
-		    if ($index >= 0) {
-			my $tv = $typevalue[$index - 1];
-			if ($tv =~ m/^(\C):(.*)/) {
-			    if ($1 eq "P" && $email_usename) {
-				push(@email_to, format_email($2, $pvalue));
-			    } else {
-				push(@email_to, $pvalue);
+		my $p_used = 0;
+		if ($index >= 0) {
+		    my $tv = $typevalue[$index - 1];
+		    if ($tv =~ m/^(\C):\s*(.*)/) {
+			if ($1 eq "P") {
+			    if ($email_usename) {
+				push_email_address(format_email($2, $pvalue));
+				$p_used = 1;
 			    }
 			}
-		    } else {
-			push(@email_to, $pvalue);
 		    }
 		}
+		if (!$p_used) {
+		    push_email_addresses($pvalue);
+		}
 	    } elsif ($ptype eq "T") {
 		push(@scm, $pvalue);
 	    } elsif ($ptype eq "W") {
@@ -412,10 +427,45 @@ sub add_categories {
     }
 }
 
+sub push_email_address {
+    my ($email_address) = @_;
+
+    my $email_name = "";
+    if ($email_address =~ m/([^<]+)<(.*\@.*)>$/) {
+	$email_name = $1;
+	$email_address = $2;
+    }
+
+    if ($email_maintainer) {
+	if ($email_usename && $email_name) {
+	    push(@email_to, format_email($email_name, $email_address));
+	} else {
+	    push(@email_to, $email_address);
+	}
+    }
+}
+
+sub push_email_addresses {
+    my ($address) = @_;
+
+    my @address_list = ();
+
+    if (rfc822_valid($address)) {
+	push_email_address($address);
+    } elsif (@address_list = rfc822_validlist($address)) {
+	my $array_count = shift(@address_list);
+	while (my $entry = shift(@address_list)) {
+	    push_email_address($entry);
+	}
+    } else {
+	warn("Invalid MAINTAINERS address: '" . $address . "'\n");
+    }
+}
+
 sub which {
     my ($bin) = @_;
 
-    foreach my $path (split /:/, $ENV{PATH}) {
+    foreach my $path (split(/:/, $ENV{PATH})) {
 	if (-e "$path/$bin") {
 	    return "$path/$bin";
 	}
@@ -434,16 +484,21 @@ sub recent_git_signoffs {
     my @lines = ();
 
     if (which("git") eq "") {
-	die("$P: git not found.  Add --nogit to options?\n");
+	warn("$P: git not found.  Add --nogit to options?\n");
+	return;
+    }
+    if (!(-d ".git")) {
+	warn("$P: .git directory not found.  Use a git repository for better results.\n");
+	warn("$P: perhaps 'git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git'\n");
+	return;
     }
 
     $cmd = "git log --since=${email_git_since} -- ${file}";
-    $cmd .= " | grep -Pi \"^[-_ 	a-z]+by:.*\\\@\"";
+    $cmd .= " | grep -Ei \"^[-_ 	a-z]+by:.*\\\@.*\$\"";
     if (!$email_git_penguin_chiefs) {
-	$cmd .= " | grep -Pv \"${penguin_chiefs}\"";
+	$cmd .= " | grep -Ev \"${penguin_chiefs}\"";
     }
     $cmd .= " | cut -f2- -d\":\"";
-    $cmd .= " | sed -e \"s/^\\s+//g\"";
     $cmd .= " | sort | uniq -c | sort -rn";
 
     $output = `${cmd}`;
@@ -465,10 +520,6 @@ sub recent_git_signoffs {
 	if ($line =~ m/(.+)<(.+)>/) {
 	    my $git_name = $1;
 	    my $git_addr = $2;
-	    $git_name =~ tr/^\"//;
-	    $git_name =~ tr/^\\s*//;
-	    $git_name =~ tr/\"$//;
-	    $git_name =~ tr/\\s*$//;
 	    if ($email_usename) {
 		push(@email_to, format_email($git_name, $git_addr));
 	    } else {
@@ -481,7 +532,6 @@ sub recent_git_signoffs {
 	    push(@email_to, $line);
 	}
     }
-    return $output;
 }
 
 sub uniq {
@@ -513,3 +563,97 @@ sub output {
 	print("\n");
     }
 }
+
+my $rfc822re;
+
+sub make_rfc822re {
+#   Basic lexical tokens are specials, domain_literal, quoted_string, atom, and
+#   comment.  We must allow for rfc822_lwsp (or comments) after each of these.
+#   This regexp will only work on addresses which have had comments stripped
+#   and replaced with rfc822_lwsp.
+
+    my $specials = '()<>@,;:\\\\".\\[\\]';
+    my $controls = '\\000-\\037\\177';
+
+    my $dtext = "[^\\[\\]\\r\\\\]";
+    my $domain_literal = "\\[(?:$dtext|\\\\.)*\\]$rfc822_lwsp*";
+
+    my $quoted_string = "\"(?:[^\\\"\\r\\\\]|\\\\.|$rfc822_lwsp)*\"$rfc822_lwsp*";
+
+#   Use zero-width assertion to spot the limit of an atom.  A simple
+#   $rfc822_lwsp* causes the regexp engine to hang occasionally.
+    my $atom = "[^$specials $controls]+(?:$rfc822_lwsp+|\\Z|(?=[\\[\"$specials]))";
+    my $word = "(?:$atom|$quoted_string)";
+    my $localpart = "$word(?:\\.$rfc822_lwsp*$word)*";
+
+    my $sub_domain = "(?:$atom|$domain_literal)";
+    my $domain = "$sub_domain(?:\\.$rfc822_lwsp*$sub_domain)*";
+
+    my $addr_spec = "$localpart\@$rfc822_lwsp*$domain";
+
+    my $phrase = "$word*";
+    my $route = "(?:\@$domain(?:,\@$rfc822_lwsp*$domain)*:$rfc822_lwsp*)";
+    my $route_addr = "\\<$rfc822_lwsp*$route?$addr_spec\\>$rfc822_lwsp*";
+    my $mailbox = "(?:$addr_spec|$phrase$route_addr)";
+
+    my $group = "$phrase:$rfc822_lwsp*(?:$mailbox(?:,\\s*$mailbox)*)?;\\s*";
+    my $address = "(?:$mailbox|$group)";
+
+    return "$rfc822_lwsp*$address";
+}
+
+sub rfc822_strip_comments {
+    my $s = shift;
+#   Recursively remove comments, and replace with a single space.  The simpler
+#   regexps in the Email Addressing FAQ are imperfect - they will miss escaped
+#   chars in atoms, for example.
+
+    while ($s =~ s/^((?:[^"\\]|\\.)*
+                    (?:"(?:[^"\\]|\\.)*"(?:[^"\\]|\\.)*)*)
+                    \((?:[^()\\]|\\.)*\)/$1 /osx) {}
+    return $s;
+}
+
+#   valid: returns true if the parameter is an RFC822 valid address
+#
+sub rfc822_valid ($) {
+    my $s = rfc822_strip_comments(shift);
+
+    if (!$rfc822re) {
+        $rfc822re = make_rfc822re();
+    }
+
+    return $s =~ m/^$rfc822re$/so && $s =~ m/^$rfc822_char*$/;
+}
+
+#   validlist: In scalar context, returns true if the parameter is an RFC822
+#              valid list of addresses.
+#
+#              In list context, returns an empty list on failure (an invalid
+#              address was found); otherwise a list whose first element is the
+#              number of addresses found and whose remaining elements are the
+#              addresses.  This is needed to disambiguate failure (invalid)
+#              from success with no addresses found, because an empty string is
+#              a valid list.
+
+sub rfc822_validlist ($) {
+    my $s = rfc822_strip_comments(shift);
+
+    if (!$rfc822re) {
+        $rfc822re = make_rfc822re();
+    }
+    # * null list items are valid according to the RFC
+    # * the '1' business is to aid in distinguishing failure from no results
+
+    my @r;
+    if ($s =~ m/^(?:$rfc822re)?(?:,(?:$rfc822re)?)*$/so &&
+	$s =~ m/^$rfc822_char*$/) {
+        while ($s =~ m/(?:^|,$rfc822_lwsp*)($rfc822re)/gos) {
+            push @r, $1;
+        }
+        return wantarray ? (scalar(@r), @r) : 1;
+    }
+    else {
+        return wantarray ? () : 0;
+    }
+}
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
new file mode 100644
index 00000000000..073cb6d152a
--- /dev/null
+++ b/scripts/gfp-translate
@@ -0,0 +1,81 @@
+#!/bin/bash
+# Translate the bits making up a GFP mask
+# (c) 2009, Mel Gorman <mel@csn.ul.ie>
+# Licensed under the terms of the GNU GPL License version 2
+SOURCE=
+GFPMASK=none
+
+# Helper function to report failures and exit
+die() {
+	echo ERROR: $@
+	if [ "$TMPFILE" != "" ]; then
+		rm -f $TMPFILE
+	fi
+	exit -1
+}
+
+usage() {
+	echo "usage: gfp-translate [-h] [ --source DIRECTORY ] gfpmask"
+	exit 0
+}
+
+# Parse command-line arguements
+while [ $# -gt 0 ]; do
+	case $1 in
+		--source)
+			SOURCE=$2
+			shift 2
+			;;
+		-h)
+			usage
+			;;
+		--help)
+			usage
+			;;
+		*)
+			GFPMASK=$1
+			shift
+			;;
+	esac
+done
+
+# Guess the kernel source directory if it's not set. Preference is in order of
+# o current directory
+# o /usr/src/linux
+if [ "$SOURCE" = "" ]; then
+	if [ -r "/usr/src/linux/Makefile" ]; then
+		SOURCE=/usr/src/linux
+	fi
+	if [ -r "`pwd`/Makefile" ]; then
+		SOURCE=`pwd`
+	fi
+fi
+
+# Confirm that a source directory exists
+if [ ! -r "$SOURCE/Makefile" ]; then
+	die "Could not locate kernel source directory or it is invalid"
+fi
+
+# Confirm that a GFP mask has been specified
+if [ "$GFPMASK" = "none" ]; then
+	usage
+fi
+
+# Extract GFP flags from the kernel source
+TMPFILE=`mktemp -t gfptranslate-XXXXXX` || exit 1
+grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+
+# Parse the flags
+IFS="
+"
+echo Source: $SOURCE
+echo Parsing: $GFPMASK
+for LINE in `cat $TMPFILE`; do
+	MASK=`echo $LINE | awk '{print $3}'`
+	if [ $(($GFPMASK&$MASK)) -ne 0 ]; then
+		echo $LINE
+	fi
+done
+
+rm -f $TMPFILE
+exit 0
diff --git a/scripts/headers.sh b/scripts/headers.sh
index d33426f866d..0308ecc10d5 100755
--- a/scripts/headers.sh
+++ b/scripts/headers.sh
@@ -15,19 +15,12 @@ do_command()
 	fi
 }
 
-# Do not try this architecture
-drop="generic um ppc sparc64 cris"
-
 archs=$(ls ${srctree}/arch)
 
 for arch in ${archs}; do
 	case ${arch} in
 	um)        # no userspace export
 		;;
-	ppc)       # headers exported by powerpc
-		;;
-	sparc64)   # headers exported by sparc
-		;;
 	cris)      # headers export are known broken
 		;;
 	*)
diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl
index 56f90a48089..db1dd7a549f 100644
--- a/scripts/headers_check.pl
+++ b/scripts/headers_check.pl
@@ -2,7 +2,7 @@
 #
 # headers_check.pl execute a number of trivial consistency checks
 #
-# Usage: headers_check.pl dir [files...]
+# Usage: headers_check.pl dir arch [files...]
 # dir:   dir to look for included files
 # arch:  architecture
 # files: list of files to check
@@ -37,7 +37,7 @@ foreach my $file (@files) {
 		&check_include();
 		&check_asm_types();
 		&check_sizetypes();
-		&check_prototypes();
+		&check_declarations();
 		# Dropped for now. Too much noise &check_config();
 	}
 	close FH;
@@ -61,16 +61,18 @@ sub check_include
 	}
 }
 
-sub check_prototypes
+sub check_declarations
 {
-	if ($line =~ m/^\s*extern\b/) {
-		printf STDERR "$filename:$lineno: extern's make no sense in userspace\n";
+	if ($line =~m/^\s*extern\b/) {
+		printf STDERR "$filename:$lineno: " .
+		              "userspace cannot call function or variable " .
+		              "defined in the kernel\n";
 	}
 }
 
 sub check_config
 {
-	if ($line =~ m/[^a-zA-Z0-9_]+CONFIG_([a-zA-Z0-9]+)[^a-zA-Z0-9]/) {
+	if ($line =~ m/[^a-zA-Z0-9_]+CONFIG_([a-zA-Z0-9_]+)[^a-zA-Z0-9_]/) {
 		printf STDERR "$filename:$lineno: leaks CONFIG_$1 to userspace where it is not valid\n";
 	}
 }
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 6654cbed965..3cb57895c9e 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -23,6 +23,10 @@
 #include <string.h>
 #include <ctype.h>
 
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+#endif
+
 #define KSYM_NAME_LEN		128
 
 struct sym_entry {
@@ -32,9 +36,23 @@ struct sym_entry {
 	unsigned char *sym;
 };
 
+struct text_range {
+	const char *stext, *etext;
+	unsigned long long start, end;
+};
+
+static unsigned long long _text;
+static struct text_range text_ranges[] = {
+	{ "_stext",     "_etext"     },
+	{ "_sinittext", "_einittext" },
+	{ "_stext_l1",  "_etext_l1"  },	/* Blackfin on-chip L1 inst SRAM */
+	{ "_stext_l2",  "_etext_l2"  },	/* Blackfin on-chip L2 SRAM */
+};
+#define text_range_text     (&text_ranges[0])
+#define text_range_inittext (&text_ranges[1])
+
 static struct sym_entry *table;
 static unsigned int table_size, table_cnt;
-static unsigned long long _text, _stext, _etext, _sinittext, _einittext;
 static int all_symbols = 0;
 static char symbol_prefix_char = '\0';
 
@@ -61,6 +79,26 @@ static inline int is_arm_mapping_symbol(const char *str)
 	       && (str[2] == '\0' || str[2] == '.');
 }
 
+static int read_symbol_tr(const char *sym, unsigned long long addr)
+{
+	size_t i;
+	struct text_range *tr;
+
+	for (i = 0; i < ARRAY_SIZE(text_ranges); ++i) {
+		tr = &text_ranges[i];
+
+		if (strcmp(sym, tr->stext) == 0) {
+			tr->start = addr;
+			return 0;
+		} else if (strcmp(sym, tr->etext) == 0) {
+			tr->end = addr;
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
 static int read_symbol(FILE *in, struct sym_entry *s)
 {
 	char str[500];
@@ -84,14 +122,8 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 	/* Ignore most absolute/undefined (?) symbols. */
 	if (strcmp(sym, "_text") == 0)
 		_text = s->addr;
-	else if (strcmp(sym, "_stext") == 0)
-		_stext = s->addr;
-	else if (strcmp(sym, "_etext") == 0)
-		_etext = s->addr;
-	else if (strcmp(sym, "_sinittext") == 0)
-		_sinittext = s->addr;
-	else if (strcmp(sym, "_einittext") == 0)
-		_einittext = s->addr;
+	else if (read_symbol_tr(sym, s->addr) == 0)
+		/* nothing to do */;
 	else if (toupper(stype) == 'A')
 	{
 		/* Keep these useful absolute symbols */
@@ -127,6 +159,21 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 	return 0;
 }
 
+static int symbol_valid_tr(struct sym_entry *s)
+{
+	size_t i;
+	struct text_range *tr;
+
+	for (i = 0; i < ARRAY_SIZE(text_ranges); ++i) {
+		tr = &text_ranges[i];
+
+		if (s->addr >= tr->start && s->addr < tr->end)
+			return 0;
+	}
+
+	return 1;
+}
+
 static int symbol_valid(struct sym_entry *s)
 {
 	/* Symbols which vary between passes.  Passes 1 and 2 must have
@@ -156,8 +203,7 @@ static int symbol_valid(struct sym_entry *s)
 	/* if --all-symbols is not specified, then symbols outside the text
 	 * and inittext sections are discarded */
 	if (!all_symbols) {
-		if ((s->addr < _stext || s->addr > _etext)
-		    && (s->addr < _sinittext || s->addr > _einittext))
+		if (symbol_valid_tr(s) == 0)
 			return 0;
 		/* Corner case.  Discard any symbols with the same value as
 		 * _etext _einittext; they can move between pass 1 and 2 when
@@ -165,10 +211,10 @@ static int symbol_valid(struct sym_entry *s)
 		 * they may get dropped in pass 2, which breaks the kallsyms
 		 * rules.
 		 */
-		if ((s->addr == _etext &&
-				strcmp((char *)s->sym + offset, "_etext")) ||
-		    (s->addr == _einittext &&
-				strcmp((char *)s->sym + offset, "_einittext")))
+		if ((s->addr == text_range_text->end &&
+				strcmp((char *)s->sym + offset, text_range_text->etext)) ||
+		    (s->addr == text_range_inittext->end &&
+				strcmp((char *)s->sym + offset, text_range_inittext->etext)))
 			return 0;
 	}
 
diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore
index b49584c932c..6a36a76e660 100644
--- a/scripts/kconfig/.gitignore
+++ b/scripts/kconfig/.gitignore
@@ -8,6 +8,9 @@ lex.*.c
 zconf.hash.c
 *.moc
 lkc_defs.h
+gconf.glade.h
+*.pot
+*.mo
 
 #
 # configuration programs
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index fa8c2dd9c98..5ddf8becd7a 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -83,7 +83,7 @@ help:
 	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
 	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
 	@echo  '  oldconfig	  - Update current config utilising a provided .config as base'
-	@echo  '  silentoldconfig - Same as oldconfig, but quietly'
+	@echo  '  silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
 	@echo  '  randconfig	  - New config with random answer to all options'
 	@echo  '  defconfig	  - New config with default answer to all options'
 	@echo  '  allmodconfig	  - New config selecting modules when possible'
@@ -104,7 +104,7 @@ HOST_EXTRACFLAGS += -DLOCALE
 # ===========================================================================
 # Shared Makefile for the various kconfig executables:
 # conf:	  Used for defconfig, oldconfig and related targets
-# mconf:  Used for the mconfig target.
+# mconf:  Used for the menuconfig target
 #         Utilizes the lxdialog package
 # qconf:  Used for the xconfig target
 #         Based on QT which needs to be installed to compile it
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index d190092c3b6..3baaaecd6b1 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -498,14 +498,15 @@ int main(int ac, char **av)
 	conf_parse(name);
 	//zconfdump(stdout);
 	if (sync_kconfig) {
-		if (stat(".config", &tmpstat)) {
+		name = conf_get_configname();
+		if (stat(name, &tmpstat)) {
 			fprintf(stderr, _("***\n"
 				"*** You have not yet configured your kernel!\n"
-				"*** (missing kernel .config file)\n"
+				"*** (missing kernel config file \"%s\")\n"
 				"***\n"
 				"*** Please run some configurator (e.g. \"make oldconfig\" or\n"
 				"*** \"make menuconfig\" or \"make xconfig\").\n"
-				"***\n"));
+				"***\n"), name);
 			exit(1);
 		}
 	}
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index 273d73888f9..a04da3459f0 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -41,6 +41,13 @@ const char *conf_get_configname(void)
 	return name ? name : ".config";
 }
 
+const char *conf_get_autoconfig_name(void)
+{
+	char *name = getenv("KCONFIG_AUTOCONFIG");
+
+	return name ? name : "include/config/auto.conf";
+}
+
 static char *conf_expand_value(const char *in)
 {
 	struct symbol *sym;
@@ -555,15 +562,14 @@ int conf_write(const char *name)
 
 int conf_split_config(void)
 {
-	char *name, path[128];
+	const char *name;
+	char path[128];
 	char *s, *d, c;
 	struct symbol *sym;
 	struct stat sb;
 	int res, i, fd;
 
-	name = getenv("KCONFIG_AUTOCONFIG");
-	if (!name)
-		name = "include/config/auto.conf";
+	name = conf_get_autoconfig_name();
 	conf_read_simple(name, S_DEF_AUTO);
 
 	if (chdir("include/config"))
@@ -670,7 +676,7 @@ int conf_write_autoconf(void)
 {
 	struct symbol *sym;
 	const char *str;
-	char *name;
+	const char *name;
 	FILE *out, *out_h;
 	time_t now;
 	int i, l;
@@ -773,9 +779,7 @@ int conf_write_autoconf(void)
 		name = "include/linux/autoconf.h";
 	if (rename(".tmpconfig.h", name))
 		return 1;
-	name = getenv("KCONFIG_AUTOCONFIG");
-	if (!name)
-		name = "include/config/auto.conf";
+	name = conf_get_autoconfig_name();
 	/*
 	 * This must be the last step, kbuild has a dependency on auto.conf
 	 * and this marks the successful completion of the previous steps.
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 4a9af6f7886..f379b0bf8c9 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -74,6 +74,7 @@ char *zconf_curname(void);
 
 /* confdata.c */
 const char *conf_get_configname(void);
+const char *conf_get_autoconfig_name(void);
 char *conf_get_default_confname(void);
 void sym_set_change_count(int count);
 void sym_add_change_count(int count);
diff --git a/scripts/kconfig/lxdialog/checklist.c b/scripts/kconfig/lxdialog/checklist.c
index b2a878c936d..bcc6f19c3a3 100644
--- a/scripts/kconfig/lxdialog/checklist.c
+++ b/scripts/kconfig/lxdialog/checklist.c
@@ -41,7 +41,8 @@ static void print_item(WINDOW * win, int choice, int selected)
 	wmove(win, choice, check_x);
 	wattrset(win, selected ? dlg.check_selected.atr
 		 : dlg.check.atr);
-	wprintw(win, "(%c)", item_is_tag('X') ? 'X' : ' ');
+	if (!item_is_tag(':'))
+		wprintw(win, "(%c)", item_is_tag('X') ? 'X' : ' ');
 
 	wattrset(win, selected ? dlg.tag_selected.atr : dlg.tag.atr);
 	mvwaddch(win, choice, item_x, item_str()[0]);
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 6841e95c098..3bcacb4bfd3 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -732,7 +732,12 @@ static void conf_choice(struct menu *menu)
 		for (child = menu->list; child; child = child->next) {
 			if (!menu_is_visible(child))
 				continue;
-			item_make("%s", _(menu_get_prompt(child)));
+			if (child->sym)
+				item_make("%s", _(menu_get_prompt(child)));
+			else {
+				item_make("*** %s ***", _(menu_get_prompt(child)));
+				item_set_tag(':');
+			}
 			item_set_data(child);
 			if (child->sym == active)
 				item_set_selected(1);
@@ -748,6 +753,9 @@ static void conf_choice(struct menu *menu)
 		case 0:
 			if (selected) {
 				child = item_data();
+				if (!child->sym)
+					break;
+
 				sym_set_tristate_value(child->sym, yes);
 			}
 			return;
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index 5d0fd38b089..ce7d508c752 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -5,6 +5,7 @@
 
 #include <qapplication.h>
 #include <qmainwindow.h>
+#include <qdesktopwidget.h>
 #include <qtoolbar.h>
 #include <qlayout.h>
 #include <qvbox.h>
@@ -297,10 +298,10 @@ void ConfigLineEdit::show(ConfigItem* i)
 void ConfigLineEdit::keyPressEvent(QKeyEvent* e)
 {
 	switch (e->key()) {
-	case Key_Escape:
+	case Qt::Key_Escape:
 		break;
-	case Key_Return:
-	case Key_Enter:
+	case Qt::Key_Return:
+	case Qt::Key_Enter:
 		sym_set_string_value(item->menu->sym, text().latin1());
 		parent()->updateList(item);
 		break;
@@ -639,7 +640,7 @@ void ConfigList::keyPressEvent(QKeyEvent* ev)
 	struct menu *menu;
 	enum prop_type type;
 
-	if (ev->key() == Key_Escape && mode != fullMode && mode != listMode) {
+	if (ev->key() == Qt::Key_Escape && mode != fullMode && mode != listMode) {
 		emit parentSelected();
 		ev->accept();
 		return;
@@ -652,8 +653,8 @@ void ConfigList::keyPressEvent(QKeyEvent* ev)
 	item = (ConfigItem*)i;
 
 	switch (ev->key()) {
-	case Key_Return:
-	case Key_Enter:
+	case Qt::Key_Return:
+	case Qt::Key_Enter:
 		if (item->goParent) {
 			emit parentSelected();
 			break;
@@ -667,16 +668,16 @@ void ConfigList::keyPressEvent(QKeyEvent* ev)
 			emit menuSelected(menu);
 			break;
 		}
-	case Key_Space:
+	case Qt::Key_Space:
 		changeValue(item);
 		break;
-	case Key_N:
+	case Qt::Key_N:
 		setValue(item, no);
 		break;
-	case Key_M:
+	case Qt::Key_M:
 		setValue(item, mod);
 		break;
-	case Key_Y:
+	case Qt::Key_Y:
 		setValue(item, yes);
 		break;
 	default:
@@ -920,7 +921,7 @@ void ConfigView::updateListAll(void)
 }
 
 ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
-	: Parent(parent, name), menu(0), sym(0)
+	: Parent(parent, name), sym(0), menu(0)
 {
 	if (name) {
 		configSettings->beginGroup(name);
@@ -1199,7 +1200,7 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam
 	layout1->addLayout(layout2);
 
 	split = new QSplitter(this);
-	split->setOrientation(QSplitter::Vertical);
+	split->setOrientation(Qt::Vertical);
 	list = new ConfigView(split, name);
 	list->list->mode = listMode;
 	info = new ConfigInfoView(split, name);
@@ -1275,7 +1276,7 @@ ConfigMainWindow::ConfigMainWindow(void)
 	int x, y, width, height;
 	char title[256];
 
-	QWidget *d = configApp->desktop();
+	QDesktopWidget *d = configApp->desktop();
 	snprintf(title, sizeof(title), _("Linux Kernel v%s Configuration"),
 		getenv("KERNELVERSION"));
 	setCaption(title);
@@ -1290,14 +1291,14 @@ ConfigMainWindow::ConfigMainWindow(void)
 		move(x, y);
 
 	split1 = new QSplitter(this);
-	split1->setOrientation(QSplitter::Horizontal);
+	split1->setOrientation(Qt::Horizontal);
 	setCentralWidget(split1);
 
 	menuView = new ConfigView(split1, "menu");
 	menuList = menuView->list;
 
 	split2 = new QSplitter(split1);
-	split2->setOrientation(QSplitter::Vertical);
+	split2->setOrientation(Qt::Vertical);
 
 	// create config tree
 	configView = new ConfigView(split2, "config");
@@ -1315,18 +1316,18 @@ ConfigMainWindow::ConfigMainWindow(void)
 	backAction = new QAction("Back", QPixmap(xpm_back), _("Back"), 0, this);
 	  connect(backAction, SIGNAL(activated()), SLOT(goBack()));
 	  backAction->setEnabled(FALSE);
-	QAction *quitAction = new QAction("Quit", _("&Quit"), CTRL+Key_Q, this);
+	QAction *quitAction = new QAction("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this);
 	  connect(quitAction, SIGNAL(activated()), SLOT(close()));
-	QAction *loadAction = new QAction("Load", QPixmap(xpm_load), _("&Load"), CTRL+Key_L, this);
+	QAction *loadAction = new QAction("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this);
 	  connect(loadAction, SIGNAL(activated()), SLOT(loadConfig()));
-	saveAction = new QAction("Save", QPixmap(xpm_save), _("&Save"), CTRL+Key_S, this);
+	saveAction = new QAction("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this);
 	  connect(saveAction, SIGNAL(activated()), SLOT(saveConfig()));
 	conf_set_changed_callback(conf_changed);
 	// Set saveAction's initial state
 	conf_changed();
 	QAction *saveAsAction = new QAction("Save As...", _("Save &As..."), 0, this);
 	  connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs()));
-	QAction *searchAction = new QAction("Find", _("&Find"), CTRL+Key_F, this);
+	QAction *searchAction = new QAction("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this);
 	  connect(searchAction, SIGNAL(activated()), SLOT(searchConfig()));
 	QAction *singleViewAction = new QAction("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this);
 	  connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView()));
@@ -1447,7 +1448,7 @@ ConfigMainWindow::ConfigMainWindow(void)
 
 void ConfigMainWindow::loadConfig(void)
 {
-	QString s = QFileDialog::getOpenFileName(".config", NULL, this);
+	QString s = QFileDialog::getOpenFileName(conf_get_configname(), NULL, this);
 	if (s.isNull())
 		return;
 	if (conf_read(QFile::encodeName(s)))
@@ -1463,7 +1464,7 @@ void ConfigMainWindow::saveConfig(void)
 
 void ConfigMainWindow::saveConfigAs(void)
 {
-	QString s = QFileDialog::getSaveFileName(".config", NULL, this);
+	QString s = QFileDialog::getSaveFileName(conf_get_configname(), NULL, this);
 	if (s.isNull())
 		return;
 	if (conf_write(QFile::encodeName(s)))
@@ -1524,6 +1525,8 @@ void ConfigMainWindow::setMenuLink(struct menu *menu)
 	case fullMode:
 		list = configList;
 		break;
+	default:
+		break;
 	}
 
 	if (list) {
@@ -1673,6 +1676,9 @@ void ConfigMainWindow::saveSettings(void)
 	case fullMode :
 		entry = "full";
 		break;
+
+	default:
+		break;
 	}
 	configSettings->writeEntry("/listMode", entry);
 
diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c
index 3cc9f936903..b6b2a46af14 100644
--- a/scripts/kconfig/util.c
+++ b/scripts/kconfig/util.c
@@ -46,8 +46,8 @@ int file_write_dep(const char *name)
 		else
 			fprintf(out, "\t%s\n", file->name);
 	}
-	fprintf(out, "\ninclude/config/auto.conf: \\\n"
-		     "\t$(deps_config)\n\n");
+	fprintf(out, "\n%s: \\\n"
+		     "\t$(deps_config)\n\n", conf_get_autoconfig_name());
 
 	expr_list_for_each_sym(sym_env_list, e, sym) {
 		struct property *prop;
@@ -61,7 +61,7 @@ int file_write_dep(const char *name)
 		if (!value)
 			value = "";
 		fprintf(out, "ifneq \"$(%s)\" \"%s\"\n", env_sym->name, value);
-		fprintf(out, "include/config/auto.conf: FORCE\n");
+		fprintf(out, "%s: FORCE\n", conf_get_autoconfig_name());
 		fprintf(out, "endif\n");
 	}
 
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index acd8c4a8e3e..a193fa3f527 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -5,7 +5,7 @@ use strict;
 ## Copyright (c) 1998 Michael Zucchi, All Rights Reserved        ##
 ## Copyright (C) 2000, 1  Tim Waugh <twaugh@redhat.com>          ##
 ## Copyright (C) 2001  Simon Huggins                             ##
-## Copyright (C) 2005-2008  Randy Dunlap                         ##
+## Copyright (C) 2005-2009  Randy Dunlap                         ##
 ## 								 ##
 ## #define enhancements by Armin Kuster <akuster@mvista.com>	 ##
 ## Copyright (c) 2000 MontaVista Software, Inc.			 ##
@@ -85,7 +85,7 @@ use strict;
 #
 # /**
 #  * my_function
-#  **/
+#  */
 #
 # If the Description: header tag is omitted, then there must be a blank line
 # after the last parameter specification.
@@ -105,7 +105,7 @@ use strict;
 #  */
 # etc.
 #
-# Beside functions you can also write documentation for structs, unions,
+# Besides functions you can also write documentation for structs, unions,
 # enums and typedefs. Instead of the function name you must write the name
 # of the declaration;  the struct/union/enum/typedef must always precede
 # the name. Nesting of declarations is not supported.
@@ -223,7 +223,7 @@ sub usage {
 }
 
 # read arguments
-if ($#ARGV==-1) {
+if ($#ARGV == -1) {
     usage();
 }
 
@@ -240,12 +240,12 @@ my $man_date = ('January', 'February', 'March', 'April', 'May', 'June',
   " " . ((localtime)[5]+1900);
 
 # Essentially these are globals
-# They probably want to be tidied up made more localised or summat.
-# CAVEAT EMPTOR!  Some of the others I localised may not want to be which
+# They probably want to be tidied up, made more localised or something.
+# CAVEAT EMPTOR!  Some of the others I localised may not want to be, which
 # could cause "use of undefined value" or other bugs.
-my ($function, %function_table,%parametertypes,$declaration_purpose);
-my ($type,$declaration_name,$return_type);
-my ($newsection,$newcontents,$prototype,$filelist, $brcount, %source_map);
+my ($function, %function_table, %parametertypes, $declaration_purpose);
+my ($type, $declaration_name, $return_type);
+my ($newsection, $newcontents, $prototype, $filelist, $brcount, %source_map);
 
 if (defined($ENV{'KBUILD_VERBOSE'})) {
 	$verbose = "$ENV{'KBUILD_VERBOSE'}";
@@ -279,10 +279,10 @@ my $doc_special = "\@\%\$\&";
 my $doc_start = '^/\*\*\s*$'; # Allow whitespace at end of comment start.
 my $doc_end = '\*/';
 my $doc_com = '\s*\*\s*';
-my $doc_decl = $doc_com.'(\w+)';
-my $doc_sect = $doc_com.'(['.$doc_special.']?[\w\s]+):(.*)';
-my $doc_content = $doc_com.'(.*)';
-my $doc_block = $doc_com.'DOC:\s*(.*)?';
+my $doc_decl = $doc_com . '(\w+)';
+my $doc_sect = $doc_com . '([' . $doc_special . ']?[\w\s]+):(.*)';
+my $doc_content = $doc_com . '(.*)';
+my $doc_block = $doc_com . 'DOC:\s*(.*)?';
 
 my %constants;
 my %parameterdescs;
@@ -485,12 +485,12 @@ sub output_enum_html(%) {
     my %args = %{$_[0]};
     my ($parameter);
     my $count;
-    print "<h2>enum ".$args{'enum'}."</h2>\n";
+    print "<h2>enum " . $args{'enum'} . "</h2>\n";
 
-    print "<b>enum ".$args{'enum'}."</b> {<br>\n";
+    print "<b>enum " . $args{'enum'} . "</b> {<br>\n";
     $count = 0;
     foreach $parameter (@{$args{'parameterlist'}}) {
-	print " <b>".$parameter."</b>";
+	print " <b>" . $parameter . "</b>";
 	if ($count != $#{$args{'parameterlist'}}) {
 	    $count++;
 	    print ",\n";
@@ -502,7 +502,7 @@ sub output_enum_html(%) {
     print "<h3>Constants</h3>\n";
     print "<dl>\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
-	print "<dt><b>".$parameter."</b>\n";
+	print "<dt><b>" . $parameter . "</b>\n";
 	print "<dd>";
 	output_highlight($args{'parameterdescs'}{$parameter});
     }
@@ -516,9 +516,9 @@ sub output_typedef_html(%) {
     my %args = %{$_[0]};
     my ($parameter);
     my $count;
-    print "<h2>typedef ".$args{'typedef'}."</h2>\n";
+    print "<h2>typedef " . $args{'typedef'} . "</h2>\n";
 
-    print "<b>typedef ".$args{'typedef'}."</b>\n";
+    print "<b>typedef " . $args{'typedef'} . "</b>\n";
     output_section_html(@_);
     print "<hr>\n";
 }
@@ -528,8 +528,8 @@ sub output_struct_html(%) {
     my %args = %{$_[0]};
     my ($parameter);
 
-    print "<h2>".$args{'type'}." ".$args{'struct'}. " - " .$args{'purpose'}."</h2>\n";
-    print "<b>".$args{'type'}." ".$args{'struct'}."</b> {<br>\n";
+    print "<h2>" . $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "</h2>\n";
+    print "<b>" . $args{'type'} . " " . $args{'struct'} . "</b> {<br>\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
 		print "$parameter<br>\n";
@@ -561,7 +561,7 @@ sub output_struct_html(%) {
 	$parameter_name =~ s/\[.*//;
 
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
-	print "<dt><b>".$parameter."</b>\n";
+	print "<dt><b>" . $parameter . "</b>\n";
 	print "<dd>";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
@@ -576,9 +576,9 @@ sub output_function_html(%) {
     my ($parameter, $section);
     my $count;
 
-    print "<h2>" .$args{'function'}." - ".$args{'purpose'}."</h2>\n";
-    print "<i>".$args{'functiontype'}."</i>\n";
-    print "<b>".$args{'function'}."</b>\n";
+    print "<h2>" . $args{'function'} . " - " . $args{'purpose'} . "</h2>\n";
+    print "<i>" . $args{'functiontype'} . "</i>\n";
+    print "<b>" . $args{'function'} . "</b>\n";
     print "(";
     $count = 0;
     foreach $parameter (@{$args{'parameterlist'}}) {
@@ -587,7 +587,7 @@ sub output_function_html(%) {
 	    # pointer-to-function
 	    print "<i>$1</i><b>$parameter</b>) <i>($2)</i>";
 	} else {
-	    print "<i>".$type."</i> <b>".$parameter."</b>";
+	    print "<i>" . $type . "</i> <b>" . $parameter . "</b>";
 	}
 	if ($count != $#{$args{'parameterlist'}}) {
 	    $count++;
@@ -603,7 +603,7 @@ sub output_function_html(%) {
 	$parameter_name =~ s/\[.*//;
 
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
-	print "<dt><b>".$parameter."</b>\n";
+	print "<dt><b>" . $parameter . "</b>\n";
 	print "<dd>";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
@@ -657,7 +657,7 @@ sub output_function_xml(%) {
     my $count;
     my $id;
 
-    $id = "API-".$args{'function'};
+    $id = "API-" . $args{'function'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry id=\"$id\">\n";
@@ -667,12 +667,12 @@ sub output_function_xml(%) {
     print " <date>$man_date</date>\n";
     print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print " <refentrytitle><phrase>".$args{'function'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase>" . $args{'function'} . "</phrase></refentrytitle>\n";
     print " <manvolnum>9</manvolnum>\n";
     print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
-    print " <refname>".$args{'function'}."</refname>\n";
+    print " <refname>" . $args{'function'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
     output_highlight ($args{'purpose'});
@@ -682,8 +682,8 @@ sub output_function_xml(%) {
     print "<refsynopsisdiv>\n";
     print " <title>Synopsis</title>\n";
     print "  <funcsynopsis><funcprototype>\n";
-    print "   <funcdef>".$args{'functiontype'}." ";
-    print "<function>".$args{'function'}." </function></funcdef>\n";
+    print "   <funcdef>" . $args{'functiontype'} . " ";
+    print "<function>" . $args{'function'} . " </function></funcdef>\n";
 
     $count = 0;
     if ($#{$args{'parameterlist'}} >= 0) {
@@ -694,7 +694,7 @@ sub output_function_xml(%) {
 		print "   <paramdef>$1<parameter>$parameter</parameter>)\n";
 		print "     <funcparams>$2</funcparams></paramdef>\n";
 	    } else {
-		print "   <paramdef>".$type;
+		print "   <paramdef>" . $type;
 		print " <parameter>$parameter</parameter></paramdef>\n";
 	    }
 	}
@@ -734,7 +734,7 @@ sub output_struct_xml(%) {
     my ($parameter, $section);
     my $id;
 
-    $id = "API-struct-".$args{'struct'};
+    $id = "API-struct-" . $args{'struct'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry id=\"$id\">\n";
@@ -744,12 +744,12 @@ sub output_struct_xml(%) {
     print " <date>$man_date</date>\n";
     print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print " <refentrytitle><phrase>".$args{'type'}." ".$args{'struct'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase>" . $args{'type'} . " " . $args{'struct'} . "</phrase></refentrytitle>\n";
     print " <manvolnum>9</manvolnum>\n";
     print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
-    print " <refname>".$args{'type'}." ".$args{'struct'}."</refname>\n";
+    print " <refname>" . $args{'type'} . " " . $args{'struct'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
     output_highlight ($args{'purpose'});
@@ -759,7 +759,7 @@ sub output_struct_xml(%) {
     print "<refsynopsisdiv>\n";
     print " <title>Synopsis</title>\n";
     print "  <programlisting>\n";
-    print $args{'type'}." ".$args{'struct'}." {\n";
+    print $args{'type'} . " " . $args{'struct'} . " {\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
 	    print "$parameter\n";
@@ -779,7 +779,7 @@ sub output_struct_xml(%) {
 	    # bitfield
 	    print "  $1 $parameter$2;\n";
 	} else {
-	    print "  ".$type." ".$parameter.";\n";
+	    print "  " . $type . " " . $parameter . ";\n";
 	}
     }
     print "};";
@@ -824,7 +824,7 @@ sub output_enum_xml(%) {
     my $count;
     my $id;
 
-    $id = "API-enum-".$args{'enum'};
+    $id = "API-enum-" . $args{'enum'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry id=\"$id\">\n";
@@ -834,12 +834,12 @@ sub output_enum_xml(%) {
     print " <date>$man_date</date>\n";
     print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print " <refentrytitle><phrase>enum ".$args{'enum'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase>enum " . $args{'enum'} . "</phrase></refentrytitle>\n";
     print " <manvolnum>9</manvolnum>\n";
     print " <refmiscinfo class=\"version\">" . $kernelversion . "</refmiscinfo>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
-    print " <refname>enum ".$args{'enum'}."</refname>\n";
+    print " <refname>enum " . $args{'enum'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
     output_highlight ($args{'purpose'});
@@ -849,7 +849,7 @@ sub output_enum_xml(%) {
     print "<refsynopsisdiv>\n";
     print " <title>Synopsis</title>\n";
     print "  <programlisting>\n";
-    print "enum ".$args{'enum'}." {\n";
+    print "enum " . $args{'enum'} . " {\n";
     $count = 0;
     foreach $parameter (@{$args{'parameterlist'}}) {
 	print "  $parameter";
@@ -891,7 +891,7 @@ sub output_typedef_xml(%) {
     my ($parameter, $section);
     my $id;
 
-    $id = "API-typedef-".$args{'typedef'};
+    $id = "API-typedef-" . $args{'typedef'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<refentry id=\"$id\">\n";
@@ -901,11 +901,11 @@ sub output_typedef_xml(%) {
     print " <date>$man_date</date>\n";
     print "</refentryinfo>\n";
     print "<refmeta>\n";
-    print " <refentrytitle><phrase>typedef ".$args{'typedef'}."</phrase></refentrytitle>\n";
+    print " <refentrytitle><phrase>typedef " . $args{'typedef'} . "</phrase></refentrytitle>\n";
     print " <manvolnum>9</manvolnum>\n";
     print "</refmeta>\n";
     print "<refnamediv>\n";
-    print " <refname>typedef ".$args{'typedef'}."</refname>\n";
+    print " <refname>typedef " . $args{'typedef'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
     output_highlight ($args{'purpose'});
@@ -914,7 +914,7 @@ sub output_typedef_xml(%) {
 
     print "<refsynopsisdiv>\n";
     print " <title>Synopsis</title>\n";
-    print "  <synopsis>typedef ".$args{'typedef'}.";</synopsis>\n";
+    print "  <synopsis>typedef " . $args{'typedef'} . ";</synopsis>\n";
     print "</refsynopsisdiv>\n";
 
     output_section_xml(@_);
@@ -963,15 +963,15 @@ sub output_function_gnome {
     my $count;
     my $id;
 
-    $id = $args{'module'}."-".$args{'function'};
+    $id = $args{'module'} . "-" . $args{'function'};
     $id =~ s/[^A-Za-z0-9]/-/g;
 
     print "<sect2>\n";
-    print " <title id=\"$id\">".$args{'function'}."</title>\n";
+    print " <title id=\"$id\">" . $args{'function'} . "</title>\n";
 
     print "  <funcsynopsis>\n";
-    print "   <funcdef>".$args{'functiontype'}." ";
-    print "<function>".$args{'function'}." ";
+    print "   <funcdef>" . $args{'functiontype'} . " ";
+    print "<function>" . $args{'function'} . " ";
     print "</function></funcdef>\n";
 
     $count = 0;
@@ -983,7 +983,7 @@ sub output_function_gnome {
 		print "   <paramdef>$1 <parameter>$parameter</parameter>)\n";
 		print "     <funcparams>$2</funcparams></paramdef>\n";
 	    } else {
-		print "   <paramdef>".$type;
+		print "   <paramdef>" . $type;
 		print " <parameter>$parameter</parameter></paramdef>\n";
 	    }
 	}
@@ -1043,13 +1043,13 @@ sub output_function_man(%) {
     print ".TH \"$args{'function'}\" 9 \"$args{'function'}\" \"$man_date\" \"Kernel Hacker's Manual\" LINUX\n";
 
     print ".SH NAME\n";
-    print $args{'function'}." \\- ".$args{'purpose'}."\n";
+    print $args{'function'} . " \\- " . $args{'purpose'} . "\n";
 
     print ".SH SYNOPSIS\n";
     if ($args{'functiontype'} ne "") {
-	print ".B \"".$args{'functiontype'}."\" ".$args{'function'}."\n";
+	print ".B \"" . $args{'functiontype'} . "\" " . $args{'function'} . "\n";
     } else {
-	print ".B \"".$args{'function'}."\n";
+	print ".B \"" . $args{'function'} . "\n";
     }
     $count = 0;
     my $parenth = "(";
@@ -1061,10 +1061,10 @@ sub output_function_man(%) {
 	$type = $args{'parametertypes'}{$parameter};
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
-	    print ".BI \"".$parenth.$1."\" ".$parameter." \") (".$2.")".$post."\"\n";
+	    print ".BI \"" . $parenth . $1 . "\" " . $parameter . " \") (" . $2 . ")" . $post . "\"\n";
 	} else {
 	    $type =~ s/([^\*])$/$1 /;
-	    print ".BI \"".$parenth.$type."\" ".$parameter." \"".$post."\"\n";
+	    print ".BI \"" . $parenth . $type . "\" " . $parameter . " \"" . $post . "\"\n";
 	}
 	$count++;
 	$parenth = "";
@@ -1075,7 +1075,7 @@ sub output_function_man(%) {
 	my $parameter_name = $parameter;
 	$parameter_name =~ s/\[.*//;
 
-	print ".IP \"".$parameter."\" 12\n";
+	print ".IP \"" . $parameter . "\" 12\n";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
     foreach $section (@{$args{'sectionlist'}}) {
@@ -1094,10 +1094,10 @@ sub output_enum_man(%) {
     print ".TH \"$args{'module'}\" 9 \"enum $args{'enum'}\" \"$man_date\" \"API Manual\" LINUX\n";
 
     print ".SH NAME\n";
-    print "enum ".$args{'enum'}." \\- ".$args{'purpose'}."\n";
+    print "enum " . $args{'enum'} . " \\- " . $args{'purpose'} . "\n";
 
     print ".SH SYNOPSIS\n";
-    print "enum ".$args{'enum'}." {\n";
+    print "enum " . $args{'enum'} . " {\n";
     $count = 0;
     foreach my $parameter (@{$args{'parameterlist'}}) {
 	print ".br\n.BI \"    $parameter\"\n";
@@ -1116,7 +1116,7 @@ sub output_enum_man(%) {
 	my $parameter_name = $parameter;
 	$parameter_name =~ s/\[.*//;
 
-	print ".IP \"".$parameter."\" 12\n";
+	print ".IP \"" . $parameter . "\" 12\n";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
     foreach $section (@{$args{'sectionlist'}}) {
@@ -1131,13 +1131,13 @@ sub output_struct_man(%) {
     my %args = %{$_[0]};
     my ($parameter, $section);
 
-    print ".TH \"$args{'module'}\" 9 \"".$args{'type'}." ".$args{'struct'}."\" \"$man_date\" \"API Manual\" LINUX\n";
+    print ".TH \"$args{'module'}\" 9 \"" . $args{'type'} . " " . $args{'struct'} . "\" \"$man_date\" \"API Manual\" LINUX\n";
 
     print ".SH NAME\n";
-    print $args{'type'}." ".$args{'struct'}." \\- ".$args{'purpose'}."\n";
+    print $args{'type'} . " " . $args{'struct'} . " \\- " . $args{'purpose'} . "\n";
 
     print ".SH SYNOPSIS\n";
-    print $args{'type'}." ".$args{'struct'}." {\n.br\n";
+    print $args{'type'} . " " . $args{'struct'} . " {\n.br\n";
 
     foreach my $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
@@ -1151,13 +1151,13 @@ sub output_struct_man(%) {
 	$type = $args{'parametertypes'}{$parameter};
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
-	    print ".BI \"    ".$1."\" ".$parameter." \") (".$2.")"."\"\n;\n";
+	    print ".BI \"    " . $1 . "\" " . $parameter . " \") (" . $2 . ")" . "\"\n;\n";
 	} elsif ($type =~ m/^(.*?)\s*(:.*)/) {
 	    # bitfield
-	    print ".BI \"    ".$1."\ \" ".$parameter.$2." \""."\"\n;\n";
+	    print ".BI \"    " . $1 . "\ \" " . $parameter . $2 . " \"" . "\"\n;\n";
 	} else {
 	    $type =~ s/([^\*])$/$1 /;
-	    print ".BI \"    ".$type."\" ".$parameter." \""."\"\n;\n";
+	    print ".BI \"    " . $type . "\" " . $parameter . " \"" . "\"\n;\n";
 	}
 	print "\n.br\n";
     }
@@ -1171,7 +1171,7 @@ sub output_struct_man(%) {
 	$parameter_name =~ s/\[.*//;
 
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
-	print ".IP \"".$parameter."\" 12\n";
+	print ".IP \"" . $parameter . "\" 12\n";
 	output_highlight($args{'parameterdescs'}{$parameter_name});
     }
     foreach $section (@{$args{'sectionlist'}}) {
@@ -1189,7 +1189,7 @@ sub output_typedef_man(%) {
     print ".TH \"$args{'module'}\" 9 \"$args{'typedef'}\" \"$man_date\" \"API Manual\" LINUX\n";
 
     print ".SH NAME\n";
-    print "typedef ".$args{'typedef'}." \\- ".$args{'purpose'}."\n";
+    print "typedef " . $args{'typedef'} . " \\- " . $args{'purpose'} . "\n";
 
     foreach $section (@{$args{'sectionlist'}}) {
 	print ".SH \"$section\"\n";
@@ -1218,13 +1218,13 @@ sub output_function_text(%) {
     my $start;
 
     print "Name:\n\n";
-    print $args{'function'}." - ".$args{'purpose'}."\n";
+    print $args{'function'} . " - " . $args{'purpose'} . "\n";
 
     print "\nSynopsis:\n\n";
     if ($args{'functiontype'} ne "") {
-	$start = $args{'functiontype'}." ".$args{'function'}." (";
+	$start = $args{'functiontype'} . " " . $args{'function'} . " (";
     } else {
-	$start = $args{'function'}." (";
+	$start = $args{'function'} . " (";
     }
     print $start;
 
@@ -1233,9 +1233,9 @@ sub output_function_text(%) {
 	$type = $args{'parametertypes'}{$parameter};
 	if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) {
 	    # pointer-to-function
-	    print $1.$parameter.") (".$2;
+	    print $1 . $parameter . ") (" . $2;
 	} else {
-	    print $type." ".$parameter;
+	    print $type . " " . $parameter;
 	}
 	if ($count != $#{$args{'parameterlist'}}) {
 	    $count++;
@@ -1251,7 +1251,7 @@ sub output_function_text(%) {
 	my $parameter_name = $parameter;
 	$parameter_name =~ s/\[.*//;
 
-	print $parameter."\n\t".$args{'parameterdescs'}{$parameter_name}."\n";
+	print $parameter . "\n\t" . $args{'parameterdescs'}{$parameter_name} . "\n";
     }
     output_section_text(@_);
 }
@@ -1276,8 +1276,8 @@ sub output_enum_text(%) {
     my $count;
     print "Enum:\n\n";
 
-    print "enum ".$args{'enum'}." - ".$args{'purpose'}."\n\n";
-    print "enum ".$args{'enum'}." {\n";
+    print "enum " . $args{'enum'} . " - " . $args{'purpose'} . "\n\n";
+    print "enum " . $args{'enum'} . " {\n";
     $count = 0;
     foreach $parameter (@{$args{'parameterlist'}}) {
 	print "\t$parameter";
@@ -1292,7 +1292,7 @@ sub output_enum_text(%) {
     print "Constants:\n\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	print "$parameter\n\t";
-	print $args{'parameterdescs'}{$parameter}."\n";
+	print $args{'parameterdescs'}{$parameter} . "\n";
     }
 
     output_section_text(@_);
@@ -1305,7 +1305,7 @@ sub output_typedef_text(%) {
     my $count;
     print "Typedef:\n\n";
 
-    print "typedef ".$args{'typedef'}." - ".$args{'purpose'}."\n";
+    print "typedef " . $args{'typedef'} . " - " . $args{'purpose'} . "\n";
     output_section_text(@_);
 }
 
@@ -1314,8 +1314,8 @@ sub output_struct_text(%) {
     my %args = %{$_[0]};
     my ($parameter);
 
-    print $args{'type'}." ".$args{'struct'}." - ".$args{'purpose'}."\n\n";
-    print $args{'type'}." ".$args{'struct'}." {\n";
+    print $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "\n\n";
+    print $args{'type'} . " " . $args{'struct'} . " {\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
 	    print "$parameter\n";
@@ -1334,7 +1334,7 @@ sub output_struct_text(%) {
 	    # bitfield
 	    print "\t$1 $parameter$2;\n";
 	} else {
-	    print "\t".$type." ".$parameter.";\n";
+	    print "\t" . $type . " " . $parameter . ";\n";
 	}
     }
     print "};\n\n";
@@ -1348,7 +1348,7 @@ sub output_struct_text(%) {
 
 	($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
 	print "$parameter\n\t";
-	print $args{'parameterdescs'}{$parameter_name}."\n";
+	print $args{'parameterdescs'}{$parameter_name} . "\n";
     }
     print "\n";
     output_section_text(@_);
@@ -1387,7 +1387,7 @@ sub output_declaration {
 # generic output function - calls the right one based on current output mode.
 sub output_blockhead {
     no strict 'refs';
-    my $func = "output_blockhead_".$output_mode;
+    my $func = "output_blockhead_" . $output_mode;
     &$func(@_);
     $section_counter++;
 }
@@ -1398,7 +1398,7 @@ sub output_blockhead {
 sub dump_declaration($$) {
     no strict 'refs';
     my ($prototype, $file) = @_;
-    my $func = "dump_".$decl_type;
+    my $func = "dump_" . $decl_type;
     &$func(@_);
 }
 
@@ -1645,7 +1645,7 @@ sub push_parameter($$$) {
 		    "or member '$param' not " .
 		    "described in '$declaration_name'\n";
 	    }
-	    print STDERR "Warning(${file}:$.):".
+	    print STDERR "Warning(${file}:$.):" .
 			 " No description found for parameter '$param'\n";
 	    ++$warnings;
 	}
@@ -1929,7 +1929,7 @@ sub process_state3_type($$) {
 	    ($2 eq '{') && $brcount++;
 	    ($2 eq '}') && $brcount--;
 	    if (($2 eq ';') && ($brcount == 0)) {
-		dump_declaration($prototype,$file);
+		dump_declaration($prototype, $file);
 		reset_state();
 		last;
 	    }
@@ -2106,7 +2106,7 @@ sub process_file($) {
 		    $section = $section_default;
 		    $contents = "";
 		} else {
-		    $contents .= $1."\n";
+		    $contents .= $1 . "\n";
 		}
 	    } else {
 		# i dont know - bad line?  ignore.
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 161b7846733..4522948a012 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -763,6 +763,8 @@ static void check_section(const char *modname, struct elf_info *elf,
 
 
 #define ALL_INIT_DATA_SECTIONS \
+	".init.setup$", ".init.rodata$", \
+	".devinit.rodata$", ".cpuinit.rodata$", ".meminit.rodata$" \
 	".init.data$", ".devinit.data$", ".cpuinit.data$", ".meminit.data$"
 #define ALL_EXIT_DATA_SECTIONS \
 	".exit.data$", ".devexit.data$", ".cpuexit.data$", ".memexit.data$"
@@ -772,21 +774,23 @@ static void check_section(const char *modname, struct elf_info *elf,
 #define ALL_EXIT_TEXT_SECTIONS \
 	".exit.text$", ".devexit.text$", ".cpuexit.text$", ".memexit.text$"
 
-#define ALL_INIT_SECTIONS ALL_INIT_DATA_SECTIONS, ALL_INIT_TEXT_SECTIONS
-#define ALL_EXIT_SECTIONS ALL_EXIT_DATA_SECTIONS, ALL_EXIT_TEXT_SECTIONS
+#define ALL_INIT_SECTIONS INIT_SECTIONS, DEV_INIT_SECTIONS, \
+	CPU_INIT_SECTIONS, MEM_INIT_SECTIONS
+#define ALL_EXIT_SECTIONS EXIT_SECTIONS, DEV_EXIT_SECTIONS, \
+	CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS
 
 #define DATA_SECTIONS ".data$", ".data.rel$"
 #define TEXT_SECTIONS ".text$"
 
-#define INIT_SECTIONS      ".init.data$", ".init.text$"
-#define DEV_INIT_SECTIONS  ".devinit.data$", ".devinit.text$"
-#define CPU_INIT_SECTIONS  ".cpuinit.data$", ".cpuinit.text$"
-#define MEM_INIT_SECTIONS  ".meminit.data$", ".meminit.text$"
+#define INIT_SECTIONS      ".init.*"
+#define DEV_INIT_SECTIONS  ".devinit.*"
+#define CPU_INIT_SECTIONS  ".cpuinit.*"
+#define MEM_INIT_SECTIONS  ".meminit.*"
 
-#define EXIT_SECTIONS      ".exit.data$", ".exit.text$"
-#define DEV_EXIT_SECTIONS  ".devexit.data$", ".devexit.text$"
-#define CPU_EXIT_SECTIONS  ".cpuexit.data$", ".cpuexit.text$"
-#define MEM_EXIT_SECTIONS  ".memexit.data$", ".memexit.text$"
+#define EXIT_SECTIONS      ".exit.*"
+#define DEV_EXIT_SECTIONS  ".devexit.*"
+#define CPU_EXIT_SECTIONS  ".cpuexit.*"
+#define MEM_EXIT_SECTIONS  ".memexit.*"
 
 /* init data sections */
 static const char *init_data_sections[] = { ALL_INIT_DATA_SECTIONS, NULL };
@@ -869,12 +873,36 @@ const struct sectioncheck sectioncheck[] = {
 	.tosec   = { INIT_SECTIONS, NULL },
 	.mismatch = XXXINIT_TO_INIT,
 },
+/* Do not reference cpuinit code/data from meminit code/data */
+{
+	.fromsec = { MEM_INIT_SECTIONS, NULL },
+	.tosec   = { CPU_INIT_SECTIONS, NULL },
+	.mismatch = XXXINIT_TO_INIT,
+},
+/* Do not reference meminit code/data from cpuinit code/data */
+{
+	.fromsec = { CPU_INIT_SECTIONS, NULL },
+	.tosec   = { MEM_INIT_SECTIONS, NULL },
+	.mismatch = XXXINIT_TO_INIT,
+},
 /* Do not reference exit code/data from devexit/cpuexit/memexit code/data */
 {
 	.fromsec = { DEV_EXIT_SECTIONS, CPU_EXIT_SECTIONS, MEM_EXIT_SECTIONS, NULL },
 	.tosec   = { EXIT_SECTIONS, NULL },
 	.mismatch = XXXEXIT_TO_EXIT,
 },
+/* Do not reference cpuexit code/data from memexit code/data */
+{
+	.fromsec = { MEM_EXIT_SECTIONS, NULL },
+	.tosec   = { CPU_EXIT_SECTIONS, NULL },
+	.mismatch = XXXEXIT_TO_EXIT,
+},
+/* Do not reference memexit code/data from cpuexit code/data */
+{
+	.fromsec = { CPU_EXIT_SECTIONS, NULL },
+	.tosec   = { MEM_EXIT_SECTIONS, NULL },
+	.mismatch = XXXEXIT_TO_EXIT,
+},
 /* Do not use exit code/data from init code */
 {
 	.fromsec = { ALL_INIT_SECTIONS, NULL },
@@ -1168,7 +1196,7 @@ static void report_sec_mismatch(const char *modname, enum mismatch mismatch,
 		"The variable %s references\n"
 		"the %s %s%s%s\n"
 		"If the reference is valid then annotate the\n"
-		"variable with __init* (see linux/init.h) "
+		"variable with __init* or __refdata (see linux/init.h) "
 		"or name the variable:\n",
 		fromsym, to, sec2annotation(tosec), tosym, to_p);
 		while (*s)
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 1264b8e2829..01c2d13dd02 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -1,38 +1,58 @@
 #!/bin/sh
 #
-# builddeb 1.2
+# builddeb 1.3
 # Copyright 2003 Wichert Akkerman <wichert@wiggy.net>
 #
 # Simple script to generate a deb package for a Linux kernel. All the
-# complexity of what to do with a kernel after it is installer or removed
+# complexity of what to do with a kernel after it is installed or removed
 # is left to other scripts and packages: they can install scripts in the
-# /etc/kernel/{pre,post}{inst,rm}.d/ directories that will be called on
-# package install and removal.
+# /etc/kernel/{pre,post}{inst,rm}.d/ directories (or an alternative location
+# specified in KDEB_HOOKDIR) that will be called on package install and
+# removal.
 
 set -e
 
+create_package() {
+	local pname="$1" pdir="$2"
+
+	cp debian/copyright "$pdir/usr/share/doc/$pname/"
+
+	# Fix ownership and permissions
+	chown -R root:root "$pdir"
+	chmod -R go-w "$pdir"
+
+	# Create the package
+	dpkg-gencontrol -isp -p$pname -P"$pdir"
+	dpkg --build "$pdir" ..
+}
+
 # Some variables and settings used throughout the script
 version=$KERNELRELEASE
-revision=`cat .version`
+revision=$(cat .version)
+if [ -n "$KDEB_PKGVERSION" ]; then
+	packageversion=$KDEB_PKGVERSION
+else
+	packageversion=$version-$revision
+fi
 tmpdir="$objtree/debian/tmp"
 fwdir="$objtree/debian/fwtmp"
-packagename=linux-$version
+packagename=linux-image-$version
 fwpackagename=linux-firmware-image
 
-if [ "$ARCH" == "um" ] ; then
+if [ "$ARCH" = "um" ] ; then
 	packagename=user-mode-linux-$version
 fi
 
 # Setup the directory structure
 rm -rf "$tmpdir" "$fwdir"
-mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
-mkdir -p "$fwdir/DEBIAN" "$fwdir/lib"
-if [ "$ARCH" == "um" ] ; then
-	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
+mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" "$tmpdir/usr/share/doc/$packagename"
+mkdir -p "$fwdir/DEBIAN" "$fwdir/lib" "$fwdir/usr/share/doc/$fwpackagename"
+if [ "$ARCH" = "um" ] ; then
+	mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/bin"
 fi
 
 # Build and install the kernel
-if [ "$ARCH" == "um" ] ; then
+if [ "$ARCH" = "um" ] ; then
 	$MAKE linux
 	cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
 	cp .config "$tmpdir/usr/share/doc/$packagename/config"
@@ -41,53 +61,100 @@ if [ "$ARCH" == "um" ] ; then
 else 
 	cp System.map "$tmpdir/boot/System.map-$version"
 	cp .config "$tmpdir/boot/config-$version"
-	cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+	# Not all arches include the boot path in KBUILD_IMAGE
+	if ! cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"; then
+		cp arch/$ARCH/boot/$KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
+	fi
 fi
 
 if grep -q '^CONFIG_MODULES=y' .config ; then
 	INSTALL_MOD_PATH="$tmpdir" make KBUILD_SRC= modules_install
-	if [ "$ARCH" == "um" ] ; then
+	if [ "$ARCH" = "um" ] ; then
 		mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/"
 		rmdir "$tmpdir/lib/modules/$version"
 	fi
 fi
 
 # Install the maintainer scripts
+# Note: hook scripts under /etc/kernel are also executed by official Debian
+# kernel packages, as well as kernel packages built using make-kpkg
+debhookdir=${KDEB_HOOKDIR:-/etc/kernel}
 for script in postinst postrm preinst prerm ; do
-	mkdir -p "$tmpdir/etc/kernel/$script.d"
+	mkdir -p "$tmpdir$debhookdir/$script.d"
 	cat <<EOF > "$tmpdir/DEBIAN/$script"
 #!/bin/sh
 
 set -e
 
-test -d /etc/kernel/$script.d && run-parts --arg="$version" /etc/kernel/$script.d
+# Pass maintainer script parameters to hook scripts
+export DEB_MAINT_PARAMS="\$@"
+
+test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d
 exit 0
 EOF
 	chmod 755 "$tmpdir/DEBIAN/$script"
 done
 
-name="Kernel Compiler <$(id -nu)@$(hostname -f)>"
+# Try to determine maintainer and email values
+if [ -n "$DEBEMAIL" ]; then
+       email=$DEBEMAIL
+elif [ -n "$EMAIL" ]; then
+       email=$EMAIL
+else
+       email=$(id -nu)@$(hostname -f)
+fi
+if [ -n "$DEBFULLNAME" ]; then
+       name=$DEBFULLNAME
+elif [ -n "$NAME" ]; then
+       name=$NAME
+else
+       name="Anonymous"
+fi
+maintainer="$name <$email>"
+
 # Generate a simple changelog template
 cat <<EOF > debian/changelog
-linux ($version-$revision) unstable; urgency=low
+linux-upstream ($packageversion) unstable; urgency=low
 
-  * A standard release
+  * Custom built Linux kernel.
 
- -- $name  $(date -R)
+ -- $maintainer  $(date -R)
 EOF
 
-# Generate a control file
-if [ "$ARCH" == "um" ]; then
+# Generate copyright file
+cat <<EOF > debian/copyright
+This is a packacked upstream version of the Linux kernel.
+
+The sources may be found at most Linux ftp sites, including:
+ftp://ftp.kernel.org/pub/linux/kernel
 
+Copyright: 1991 - 2009 Linus Torvalds and others.
+
+The git repository for mainline kernel development is at:
+git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; version 2 dated June, 1991.
+
+On Debian GNU/Linux systems, the complete text of the GNU General Public
+License version 2 can be found in \`/usr/share/common-licenses/GPL-2'.
+EOF
+
+# Generate a control file
 cat <<EOF > debian/control
-Source: linux
-Section: base
+Source: linux-upstream
+Section: admin
 Priority: optional
-Maintainer: $name
-Standards-Version: 3.6.1
+Maintainer: $maintainer
+Standards-Version: 3.8.1
+EOF
+
+if [ "$ARCH" = "um" ]; then
+	cat <<EOF >> debian/control
 
 Package: $packagename
-Provides: kernel-image-$version, linux-image-$version
+Provides: linux-image, linux-image-2.6, linux-modules-$version
 Architecture: any
 Description: User Mode Linux kernel, version $version
  User-mode Linux is a port of the Linux kernel to its own system call
@@ -97,30 +164,22 @@ Description: User Mode Linux kernel, version $version
  many other things.
  .
  This package contains the Linux kernel, modules and corresponding other
- files version $version
+ files, version: $version.
 EOF
 
 else
-cat <<EOF > debian/control
-Source: linux
-Section: base
-Priority: optional
-Maintainer: $name
-Standards-Version: 3.6.1
+	cat <<EOF >> debian/control
 
 Package: $packagename
-Provides: kernel-image-$version, linux-image-$version
+Provides: linux-image, linux-image-2.6, linux-modules-$version
 Suggests: $fwpackagename
 Architecture: any
 Description: Linux kernel, version $version
  This package contains the Linux kernel, modules and corresponding other
- files version $version
+ files, version: $version.
 EOF
-fi
 
-# Fix some ownership and permissions
-chown -R root:root "$tmpdir"
-chmod -R go-w "$tmpdir"
+fi
 
 # Do we have firmware? Move it out of the way and build it into a package.
 if [ -e "$tmpdir/lib/firmware" ]; then
@@ -131,16 +190,12 @@ if [ -e "$tmpdir/lib/firmware" ]; then
 Package: $fwpackagename
 Architecture: all
 Description: Linux kernel firmware, version $version
- This package contains firmware from the Linux kernel, version $version
+ This package contains firmware from the Linux kernel, version $version.
 EOF
 
-	dpkg-gencontrol -isp -p$fwpackagename -P"$fwdir"
-	dpkg --build "$fwdir" ..
+	create_package "$fwpackagename" "$fwdir"
 fi
 
-# Perform the final magic
-dpkg-gencontrol -isp -p$packagename
-dpkg --build "$tmpdir" ..
+create_package "$packagename" "$tmpdir"
 
 exit 0
-
diff --git a/scripts/pnmtologo.c b/scripts/pnmtologo.c
index 6aa2a2483f8..64f5ddb09ea 100644
--- a/scripts/pnmtologo.c
+++ b/scripts/pnmtologo.c
@@ -237,22 +237,22 @@ static void write_header(void)
     fprintf(out, " *  Linux logo %s\n", logoname);
     fputs(" */\n\n", out);
     fputs("#include <linux/linux_logo.h>\n\n", out);
-    fprintf(out, "static unsigned char %s_data[] __initdata = {\n",
+    fprintf(out, "static const unsigned char %s_data[] __initconst = {\n",
 	    logoname);
 }
 
 static void write_footer(void)
 {
     fputs("\n};\n\n", out);
-    fprintf(out, "struct linux_logo %s __initdata = {\n", logoname);
-    fprintf(out, "    .type\t= %s,\n", logo_types[logo_type]);
-    fprintf(out, "    .width\t= %d,\n", logo_width);
-    fprintf(out, "    .height\t= %d,\n", logo_height);
+    fprintf(out, "const struct linux_logo %s __initconst = {\n", logoname);
+    fprintf(out, "\t.type\t\t= %s,\n", logo_types[logo_type]);
+    fprintf(out, "\t.width\t\t= %d,\n", logo_width);
+    fprintf(out, "\t.height\t\t= %d,\n", logo_height);
     if (logo_type == LINUX_LOGO_CLUT224) {
-	fprintf(out, "    .clutsize\t= %d,\n", logo_clutsize);
-	fprintf(out, "    .clut\t= %s_clut,\n", logoname);
+	fprintf(out, "\t.clutsize\t= %d,\n", logo_clutsize);
+	fprintf(out, "\t.clut\t\t= %s_clut,\n", logoname);
     }
-    fprintf(out, "    .data\t= %s_data\n", logoname);
+    fprintf(out, "\t.data\t\t= %s_data\n", logoname);
     fputs("};\n\n", out);
 
     /* close logo file */
@@ -374,7 +374,7 @@ static void write_logo_clut224(void)
     fputs("\n};\n\n", out);
 
     /* write logo clut */
-    fprintf(out, "static unsigned char %s_clut[] __initdata = {\n",
+    fprintf(out, "static const unsigned char %s_clut[] __initconst = {\n",
 	    logoname);
     write_hex_cnt = 0;
     for (i = 0; i < logo_clutsize; i++) {
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 91033e67321..7109e2b5bc0 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -226,6 +226,26 @@ if ($arch eq "x86_64") {
     if ($is_module eq "0") {
         $cc .= " -mconstant-gp";
     }
+} elsif ($arch eq "sparc64") {
+    # In the objdump output there are giblets like:
+    # 0000000000000000 <igmp_net_exit-0x18>:
+    # As there's some data blobs that get emitted into the
+    # text section before the first instructions and the first
+    # real symbols.  We don't want to match that, so to combat
+    # this we use '\w' so we'll match just plain symbol names,
+    # and not those that also include hex offsets inside of the
+    # '<>' brackets.  Actually the generic function_regex setting
+    # could safely use this too.
+    $function_regex = "^([0-9a-fA-F]+)\\s+<(\\w*?)>:";
+
+    # Sparc64 calls '_mcount' instead of plain 'mcount'.
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+
+    $alignment = 8;
+    $type = ".xword";
+    $ld .= " -m elf64_sparc";
+    $cc .= " -m64";
+    $objcopy .= " -O elf64-sparc";
 } else {
     die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
 }
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 00790472f64..46989b88d73 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -39,8 +39,10 @@ if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
 	        printf -- '-svn%s' "`git svn find-rev $head`"
 	fi
 
-	# Are there uncommitted changes?
-	git update-index --refresh --unmerged > /dev/null
+	# Update index only on r/w media
+	[ -w . ] && git update-index --refresh --unmerged > /dev/null
+
+	# Check for uncommitted changes
 	if git diff-index --name-only HEAD | grep -v "^scripts/package" \
 	    | read dummy; then
 		printf '%s' -dirty
diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py
index 902f9a99262..db40fa04cd5 100644
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -12,10 +12,9 @@ calls. Only the functions's names and the the call time are provided.
 
 Usage:
 	Be sure that you have CONFIG_FUNCTION_TRACER
-	# mkdir /debugfs
-	# mount -t debug debug /debug
-	# echo function > /debug/tracing/current_tracer
-	$ cat /debug/tracing/trace_pipe > ~/raw_trace_func
+	# mount -t debugfs nodev /sys/kernel/debug
+	# echo function > /sys/kernel/debug/tracing/current_tracer
+	$ cat /sys/kernel/debug/tracing/trace_pipe > ~/raw_trace_func
 	Wait some times but not too much, the script is a bit slow.
 	Break the pipe (Ctrl + Z)
 	$ scripts/draw_functrace.py < raw_trace_func > draw_functrace
diff --git a/scripts/unifdef.c b/scripts/unifdef.c
index 05a31a6c7e1..30d459fb070 100644
--- a/scripts/unifdef.c
+++ b/scripts/unifdef.c
@@ -678,8 +678,10 @@ eval_unary(const struct ops *ops, int *valp, const char **cpp)
 	if (*cp == '!') {
 		debug("eval%d !", ops - eval_ops);
 		cp++;
-		if (eval_unary(ops, valp, &cp) == LT_IF)
+		if (eval_unary(ops, valp, &cp) == LT_IF) {
+			*cpp = cp;
 			return (LT_IF);
+		}
 		*valp = !*valp;
 	} else if (*cp == '(') {
 		cp++;
@@ -700,13 +702,16 @@ eval_unary(const struct ops *ops, int *valp, const char **cpp)
 			return (LT_IF);
 		cp = skipcomment(cp);
 		sym = findsym(cp);
-		if (sym < 0)
-			return (LT_IF);
-		*valp = (value[sym] != NULL);
 		cp = skipsym(cp);
 		cp = skipcomment(cp);
 		if (*cp++ != ')')
 			return (LT_IF);
+		if (sym >= 0)
+			*valp = (value[sym] != NULL);
+		else {
+			*cpp = cp;
+			return (LT_IF);
+		}
 		keepthis = false;
 	} else if (!endsym(*cp)) {
 		debug("eval%d symbol", ops - eval_ops);
@@ -741,11 +746,11 @@ eval_table(const struct ops *ops, int *valp, const char **cpp)
 	const struct op *op;
 	const char *cp;
 	int val;
+	Linetype lhs, rhs;
 
 	debug("eval%d", ops - eval_ops);
 	cp = *cpp;
-	if (ops->inner(ops+1, valp, &cp) == LT_IF)
-		return (LT_IF);
+	lhs = ops->inner(ops+1, valp, &cp);
 	for (;;) {
 		cp = skipcomment(cp);
 		for (op = ops->op; op->str != NULL; op++)
@@ -755,14 +760,32 @@ eval_table(const struct ops *ops, int *valp, const char **cpp)
 			break;
 		cp += strlen(op->str);
 		debug("eval%d %s", ops - eval_ops, op->str);
-		if (ops->inner(ops+1, &val, &cp) == LT_IF)
-			return (LT_IF);
-		*valp = op->fn(*valp, val);
+		rhs = ops->inner(ops+1, &val, &cp);
+		if (op->fn == op_and && (lhs == LT_FALSE || rhs == LT_FALSE)) {
+			debug("eval%d: and always false", ops - eval_ops);
+			if (lhs == LT_IF)
+				*valp = val;
+			lhs = LT_FALSE;
+			continue;
+		}
+		if (op->fn == op_or && (lhs == LT_TRUE || rhs == LT_TRUE)) {
+			debug("eval%d: or always true", ops - eval_ops);
+			if (lhs == LT_IF)
+				*valp = val;
+			lhs = LT_TRUE;
+			continue;
+		}
+		if (rhs == LT_IF)
+			lhs = LT_IF;
+		if (lhs != LT_IF)
+			*valp = op->fn(*valp, val);
 	}
 
 	*cpp = cp;
 	debug("eval%d = %d", ops - eval_ops, *valp);
-	return (*valp ? LT_TRUE : LT_FALSE);
+	if (lhs != LT_IF)
+		lhs = (*valp ? LT_TRUE : LT_FALSE);
+	return lhs;
 }
 
 /*
@@ -773,12 +796,15 @@ eval_table(const struct ops *ops, int *valp, const char **cpp)
 static Linetype
 ifeval(const char **cpp)
 {
+	const char *cp = *cpp;
 	int ret;
 	int val;
 
 	debug("eval %s", *cpp);
 	keepthis = killconsts ? false : true;
-	ret = eval_table(eval_ops, &val, cpp);
+	ret = eval_table(eval_ops, &val, &cp);
+	if (ret != LT_IF)
+		*cpp = cp;
 	debug("eval = %d", val);
 	return (keepthis ? LT_IF : ret);
 }
diff --git a/scripts/ver_linux b/scripts/ver_linux
index dbb3037f134..7de36df4eaa 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -65,7 +65,7 @@ sed -n -e '/^.*\/libc-\([^/]*\)\.so$/{s//\1/;p;q}' < /proc/self/maps
 ldd -v > /dev/null 2>&1 && ldd -v || ldd --version |head -n 1 | awk \
 'NR==1{print "Dynamic linker (ldd)  ", $NF}'
 
-ls -l /usr/lib/lib{g,stdc}++.so  2>/dev/null | awk -F. \
+ls -l /usr/lib/libg++.so /usr/lib/libstdc++.so  2>/dev/null | awk -F. \
        '{print "Linux C++ Library      " $4"."$5"."$6}'
 
 ps --version 2>&1 | grep version | awk \
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 195906bce26..15c2a08a66f 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -4495,7 +4495,7 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex,
 	 * when the packet is on it's final way out.
 	 * NOTE: there appear to be some IPv6 multicast cases where skb->dst
 	 *       is NULL, in this case go ahead and apply access control. */
-	if (skb->dst != NULL && skb->dst->xfrm != NULL)
+	if (skb_dst(skb) != NULL && skb_dst(skb)->xfrm != NULL)
 		return NF_ACCEPT;
 #endif
 	secmark_active = selinux_secmark_enabled();
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index c0eb72013d6..72b18452e1a 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -447,7 +447,7 @@ int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
 	struct dst_entry *dst;
 	int rc = 0;
 
-	dst = skb->dst;
+	dst = skb_dst(skb);
 
 	if (dst) {
 		struct dst_entry *dst_test;
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 5c48e36038f..dc78272fc39 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1089,7 +1089,7 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
 		goto out;
 	}
 
-	aaci->base = ioremap(dev->res.start, SZ_4K);
+	aaci->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!aaci->base) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/sound/drivers/pcsp/pcsp.h b/sound/drivers/pcsp/pcsp.h
index cdef2664218..174dd2ff0f2 100644
--- a/sound/drivers/pcsp/pcsp.h
+++ b/sound/drivers/pcsp/pcsp.h
@@ -10,6 +10,7 @@
 #define __PCSP_H__
 
 #include <linux/hrtimer.h>
+#include <linux/timex.h>
 #if defined(CONFIG_MIPS) || defined(CONFIG_X86)
 /* Use the global PIT lock ! */
 #include <asm/i8253.h>
diff --git a/sound/oss/msnd.c b/sound/oss/msnd.c
index e4282d93a1a..21eb6dce46d 100644
--- a/sound/oss/msnd.c
+++ b/sound/oss/msnd.c
@@ -100,7 +100,7 @@ void msnd_fifo_free(msnd_fifo *f)
 int msnd_fifo_alloc(msnd_fifo *f, size_t n)
 {
 	msnd_fifo_free(f);
-	f->data = (char *)vmalloc(n);
+	f->data = vmalloc(n);
 	f->n = n;
 	f->tail = 0;
 	f->head = 0;
diff --git a/sound/oss/pas2_pcm.c b/sound/oss/pas2_pcm.c
index 36c3ea62086..8f7d175767a 100644
--- a/sound/oss/pas2_pcm.c
+++ b/sound/oss/pas2_pcm.c
@@ -17,7 +17,7 @@
 
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <asm/timex.h>
+#include <linux/timex.h>
 #include "sound_config.h"
 
 #include "pas2.h"
diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c
index 6a3891ab69d..296123ab74f 100644
--- a/sound/pci/aw2/aw2-saa7146.c
+++ b/sound/pci/aw2/aw2-saa7146.c
@@ -108,7 +108,7 @@ void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip,
 #endif
 	/* WS0_CTRL, WS0_SYNC: input TSL1, I2S */
 
-	/* At initialization WS1 and WS2 are disbaled (configured as input */
+	/* At initialization WS1 and WS2 are disabled (configured as input) */
 	acon1 |= 0 * WS1_CTRL;
 	acon1 |= 0 * WS2_CTRL;
 
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index 80fb2baed7a..b0adc809400 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -259,7 +259,6 @@ static int atc_pcm_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 	int n_amixer = apcm->substream->runtime->channels, i = 0;
 	int device = apcm->substream->pcm->device;
 	unsigned int pitch;
-	unsigned long flags;
 
 	if (NULL != apcm->src) {
 		/* Prepared pcm playback */
@@ -311,10 +310,10 @@ static int atc_pcm_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 	src = apcm->src;
 	for (i = 0; i < n_amixer; i++) {
 		amixer = apcm->amixers[i];
-		spin_lock_irqsave(&atc->atc_lock, flags);
+		mutex_lock(&atc->atc_mutex);
 		amixer->ops->setup(amixer, &src->rsc,
 					INIT_VOL, atc->pcm[i+device*2]);
-		spin_unlock_irqrestore(&atc->atc_lock, flags);
+		mutex_unlock(&atc->atc_mutex);
 		src = src->ops->next_interleave(src);
 		if (NULL == src)
 			src = apcm->src;
@@ -865,7 +864,6 @@ static int
 spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 {
 	struct dao *dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
-	unsigned long flags;
 	unsigned int rate = apcm->substream->runtime->rate;
 	unsigned int status;
 	int err;
@@ -885,7 +883,7 @@ spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 		return -ENOENT;
 	}
 
-	spin_lock_irqsave(&atc->atc_lock, flags);
+	mutex_lock(&atc->atc_mutex);
 	dao->ops->get_spos(dao, &status);
 	if (((status >> 24) & IEC958_AES3_CON_FS) != iec958_con_fs) {
 		status &= ((~IEC958_AES3_CON_FS) << 24);
@@ -895,7 +893,7 @@ spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 	}
 	if ((rate != atc->pll_rate) && (32000 != rate))
 		err = atc_pll_init(atc, rate);
-	spin_unlock_irqrestore(&atc->atc_lock, flags);
+	mutex_unlock(&atc->atc_mutex);
 
 	return err;
 }
@@ -908,7 +906,6 @@ spdif_passthru_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 	struct dao *dao;
 	int err;
 	int i;
-	unsigned long flags;
 
 	if (NULL != apcm->src)
 		return 0;
@@ -934,13 +931,13 @@ spdif_passthru_playback_prepare(struct ct_atc *atc, struct ct_atc_pcm *apcm)
 			src = apcm->src;
 	}
 	/* Connect to SPDIFOO */
-	spin_lock_irqsave(&atc->atc_lock, flags);
+	mutex_lock(&atc->atc_mutex);
 	dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
 	amixer = apcm->amixers[0];
 	dao->ops->set_left_input(dao, &amixer->rsc);
 	amixer = apcm->amixers[1];
 	dao->ops->set_right_input(dao, &amixer->rsc);
-	spin_unlock_irqrestore(&atc->atc_lock, flags);
+	mutex_unlock(&atc->atc_mutex);
 
 	ct_timer_prepare(apcm->timer);
 
@@ -1088,7 +1085,6 @@ static int atc_spdif_out_set_status(struct ct_atc *atc, unsigned int status)
 
 static int atc_spdif_out_passthru(struct ct_atc *atc, unsigned char state)
 {
-	unsigned long flags;
 	struct dao_desc da_dsc = {0};
 	struct dao *dao;
 	int err;
@@ -1096,7 +1092,7 @@ static int atc_spdif_out_passthru(struct ct_atc *atc, unsigned char state)
 	struct rsc *rscs[2] = {NULL};
 	unsigned int spos = 0;
 
-	spin_lock_irqsave(&atc->atc_lock, flags);
+	mutex_lock(&atc->atc_mutex);
 	dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
 	da_dsc.msr = state ? 1 : atc->msr;
 	da_dsc.passthru = state ? 1 : 0;
@@ -1114,7 +1110,7 @@ static int atc_spdif_out_passthru(struct ct_atc *atc, unsigned char state)
 	}
 	dao->ops->set_spos(dao, spos);
 	dao->ops->commit_write(dao);
-	spin_unlock_irqrestore(&atc->atc_lock, flags);
+	mutex_unlock(&atc->atc_mutex);
 
 	return err;
 }
@@ -1572,7 +1568,7 @@ int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci,
 	atc->msr = msr;
 	atc->chip_type = chip_type;
 
-	spin_lock_init(&atc->atc_lock);
+	mutex_init(&atc->atc_mutex);
 
 	/* Find card model */
 	err = atc_identify_card(atc);
diff --git a/sound/pci/ctxfi/ctatc.h b/sound/pci/ctxfi/ctatc.h
index a03347232e8..9fe620ea5f3 100644
--- a/sound/pci/ctxfi/ctatc.h
+++ b/sound/pci/ctxfi/ctatc.h
@@ -19,7 +19,7 @@
 #define CTATC_H
 
 #include <linux/types.h>
-#include <linux/spinlock_types.h>
+#include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/timer.h>
 #include <sound/core.h>
@@ -90,7 +90,7 @@ struct ct_atc {
 	void (*unmap_audio_buffer)(struct ct_atc *atc, struct ct_atc_pcm *apcm);
 	unsigned long (*get_ptp_phys)(struct ct_atc *atc, int index);
 
-	spinlock_t atc_lock;
+	struct mutex atc_mutex;
 
 	int (*pcm_playback_prepare)(struct ct_atc *atc,
 				    struct ct_atc_pcm *apcm);
diff --git a/sound/pci/ctxfi/cttimer.c b/sound/pci/ctxfi/cttimer.c
index 779c6c3591a..93b0aedc36d 100644
--- a/sound/pci/ctxfi/cttimer.c
+++ b/sound/pci/ctxfi/cttimer.c
@@ -180,7 +180,7 @@ static inline unsigned int ct_xfitimer_get_wc(struct ct_timer *atimer)
  *
  * call this inside the lock and irq disabled
  */
-static int ct_xfitimer_reprogram(struct ct_timer *atimer)
+static int ct_xfitimer_reprogram(struct ct_timer *atimer, int can_update)
 {
 	struct ct_timer_instance *ti;
 	unsigned int min_intr = (unsigned int)-1;
@@ -216,6 +216,8 @@ static int ct_xfitimer_reprogram(struct ct_timer *atimer)
 			ti->frag_count = div_u64((u64)pos * CT_TIMER_FREQ +
 						 rate - 1, rate);
 		}
+		if (ti->need_update && !can_update)
+			min_intr = 0; /* pending to the next irq */
 		if (ti->frag_count < min_intr)
 			min_intr = ti->frag_count;
 	}
@@ -235,7 +237,7 @@ static void ct_xfitimer_check_period(struct ct_timer *atimer)
 
 	spin_lock_irqsave(&atimer->list_lock, flags);
 	list_for_each_entry(ti, &atimer->instance_head, instance_list) {
-		if (ti->need_update) {
+		if (ti->running && ti->need_update) {
 			ti->need_update = 0;
 			ti->apcm->interrupt(ti->apcm);
 		}
@@ -252,7 +254,7 @@ static void ct_xfitimer_callback(struct ct_timer *atimer)
 	spin_lock_irqsave(&atimer->lock, flags);
 	atimer->irq_handling = 1;
 	do {
-		update = ct_xfitimer_reprogram(atimer);
+		update = ct_xfitimer_reprogram(atimer, 1);
 		spin_unlock(&atimer->lock);
 		if (update)
 			ct_xfitimer_check_period(atimer);
@@ -265,6 +267,7 @@ static void ct_xfitimer_callback(struct ct_timer *atimer)
 static void ct_xfitimer_prepare(struct ct_timer_instance *ti)
 {
 	ti->frag_count = ti->substream->runtime->period_size;
+	ti->running = 0;
 	ti->need_update = 0;
 }
 
@@ -273,7 +276,6 @@ static void ct_xfitimer_prepare(struct ct_timer_instance *ti)
 static void ct_xfitimer_update(struct ct_timer *atimer)
 {
 	unsigned long flags;
-	int update;
 
 	spin_lock_irqsave(&atimer->lock, flags);
 	if (atimer->irq_handling) {
@@ -284,10 +286,8 @@ static void ct_xfitimer_update(struct ct_timer *atimer)
 	}
 
 	ct_xfitimer_irq_stop(atimer);
-	update = ct_xfitimer_reprogram(atimer);
+	ct_xfitimer_reprogram(atimer, 0);
 	spin_unlock_irqrestore(&atimer->lock, flags);
-	if (update)
-		ct_xfitimer_check_period(atimer);
 }
 
 static void ct_xfitimer_start(struct ct_timer_instance *ti)
@@ -298,6 +298,8 @@ static void ct_xfitimer_start(struct ct_timer_instance *ti)
 	spin_lock_irqsave(&atimer->lock, flags);
 	if (list_empty(&ti->running_list))
 		atimer->wc = ct_xfitimer_get_wc(atimer);
+	ti->running = 1;
+	ti->need_update = 0;
 	list_add(&ti->running_list, &atimer->running_head);
 	spin_unlock_irqrestore(&atimer->lock, flags);
 	ct_xfitimer_update(atimer);
@@ -310,7 +312,7 @@ static void ct_xfitimer_stop(struct ct_timer_instance *ti)
 
 	spin_lock_irqsave(&atimer->lock, flags);
 	list_del_init(&ti->running_list);
-	ti->need_update = 0;
+	ti->running = 0;
 	spin_unlock_irqrestore(&atimer->lock, flags);
 	ct_xfitimer_update(atimer);
 }
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 337d2a59c67..d22b2606801 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9014,6 +9014,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x0145, "Acer Aspire 8930G",
 		ALC888_ACER_ASPIRE_8930G),
+	SND_PCI_QUIRK(0x1025, 0x0146, "Acer Aspire 6935G",
+		ALC888_ACER_ASPIRE_8930G),
 	SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 173bebf9f51..8aa5687f392 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -356,8 +356,6 @@ struct ichdev {
         unsigned int position;
 	unsigned int pos_shift;
 	unsigned int last_pos;
-	unsigned long last_pos_jiffies;
-	unsigned int jiffy_to_bytes;
         int frags;
         int lvi;
         int lvi_frag;
@@ -844,7 +842,6 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		val = ICH_IOCE | ICH_STARTBM;
 		ichdev->last_pos = ichdev->position;
-		ichdev->last_pos_jiffies = jiffies;
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		ichdev->suspended = 1;
@@ -1048,7 +1045,6 @@ static int snd_intel8x0_pcm_prepare(struct snd_pcm_substream *substream)
 			ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
 	}
 	snd_intel8x0_setup_periods(chip, ichdev);
-	ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ;
 	return 0;
 }
 
@@ -1073,19 +1069,23 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs
 		    ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
 			break;
 	} while (timeout--);
+	ptr = ichdev->last_pos;
 	if (ptr1 != 0) {
 		ptr1 <<= ichdev->pos_shift;
 		ptr = ichdev->fragsize1 - ptr1;
 		ptr += position;
-		ichdev->last_pos = ptr;
-		ichdev->last_pos_jiffies = jiffies;
-	} else {
-		ptr1 = jiffies - ichdev->last_pos_jiffies;
-		if (ptr1)
-			ptr1 -= 1;
-		ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes;
-		ptr %= ichdev->size;
+		if (ptr < ichdev->last_pos) {
+			unsigned int pos_base, last_base;
+			pos_base = position / ichdev->fragsize1;
+			last_base = ichdev->last_pos / ichdev->fragsize1;
+			/* another sanity check; ptr1 can go back to full
+			 * before the base position is updated
+			 */
+			if (pos_base == last_base)
+				ptr = ichdev->last_pos;
+		}
 	}
+	ichdev->last_pos = ptr;
 	spin_unlock(&chip->reg_lock);
 	if (ptr >= ichdev->size)
 		return 0;
diff --git a/sound/pci/sis7019.h b/sound/pci/sis7019.h
index 013b6739a74..bc8c7681940 100644
--- a/sound/pci/sis7019.h
+++ b/sound/pci/sis7019.h
@@ -203,7 +203,7 @@
 #define SIS_WEISR_B	0xac
 
 
-/* Playback DMA parameters (paramter RAM) */
+/* Playback DMA parameters (parameter RAM) */
 #define SIS_PLAY_DMA_OFFSET	0x0000
 #define SIS_PLAY_DMA_SIZE	0x10
 #define SIS_PLAY_DMA_ADDR(addr, num) \
@@ -228,7 +228,7 @@
 #define		SIS_PLAY_DMA_SSO_MASK		0xffff0000
 #define		SIS_PLAY_DMA_ESO_MASK		0x0000ffff
 
-/* Capture DMA parameters (paramter RAM) */
+/* Capture DMA parameters (parameter RAM) */
 #define SIS_CAPTURE_DMA_OFFSET	0x0800
 #define SIS_CAPTURE_DMA_SIZE	0x10
 #define SIS_CAPTURE_DMA_ADDR(addr, num) \
diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c
index c0efe449111..6416d3f0c7b 100644
--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -367,7 +367,7 @@ static int vx2_load_xilinx_binary(struct vx_core *chip, const struct firmware *x
 	unsigned int port;
 	const unsigned char *image;
 
-	/* XILINX reset (wait at least 1 milisecond between reset on and off). */
+	/* XILINX reset (wait at least 1 millisecond between reset on and off). */
 	vx_outl(chip, CNTRL, VX_CNTRL_REGISTER_VALUE | VX_XILINX_RESET_MASK);
 	vx_inl(chip, CNTRL);
 	msleep(10);
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 1fc4c8e0899..c550750c79c 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -375,10 +375,6 @@ static void ssm2602_shutdown(struct snd_pcm_substream *substream,
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct ssm2602_priv *ssm2602 = codec->private_data;
 
-	if (ssm2602->master_substream == substream)
-		ssm2602->master_substream = ssm2602->slave_substream;
-
-	ssm2602->slave_substream = NULL;
 	/* deactivate */
 	if (!codec->active)
 		ssm2602_write(codec, SSM2602_ACTIVE, 0);
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index d8a9222fbf7..e8d2e3e14c4 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -1257,22 +1257,18 @@ static struct {
 	int div;
 } bclk_divs[] = {
 	{  10,  0 },
-	{  15,  1 },
 	{  20,  2 },
 	{  30,  3 },
 	{  40,  4 },
 	{  50,  5 },
-	{  55,  6 },
 	{  60,  7 },
 	{  80,  8 },
 	{ 100,  9 },
-	{ 110, 10 },
 	{ 120, 11 },
 	{ 160, 12 },
 	{ 200, 13 },
 	{ 220, 14 },
 	{ 240, 15 },
-	{ 250, 16 },
 	{ 300, 17 },
 	{ 320, 18 },
 	{ 440, 19 },
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index dcd163a4ee9..6375b4ea525 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -98,13 +98,14 @@ config SND_PXA2XX_SOC_EM_X270
 	  CompuLab EM-x270, eXeda and CM-X300 machines.
 
 config SND_PXA2XX_SOC_PALM27X
-	bool "SoC Audio support for Palm T|X, T5 and LifeDrive"
-	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || MACH_PALMT5)
+	bool "SoC Audio support for Palm T|X, T5, E2 and LifeDrive"
+	depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \
+			MACH_PALMT5 || MACH_PALMTE2)
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
 	  Say Y if you want to add support for SoC audio on
-	  Palm T|X, T5 or LifeDrive handheld computer.
+	  Palm T|X, T5, E2 or LifeDrive handheld computer.
 
 config SND_SOC_ZYLONITE
 	tristate "SoC Audio support for Marvell Zylonite"
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index c89a3cdf31e..326955dea36 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -184,7 +184,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream,
 
 	/* set cpu DAI configuration */
 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
-			SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBS_CFS);
+			SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_CBS_CFS);
 	if (ret < 0)
 		return ret;
 
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 44fcc4e01e0..e6102fda0a7 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -205,7 +205,7 @@ static int palm27x_asoc_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!(machine_is_palmtx() || machine_is_palmt5() ||
-		machine_is_palmld()))
+		machine_is_palmld() || machine_is_palmte2()))
 		return -ENODEV;
 
 	if (pdev->dev.platform_data)
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 168a088ba76..a587ec40b44 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 3698f707c44..3f03d5ddfac 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 
 #include <sound/core.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index cc066964dad..556e35f0ab7 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -21,6 +21,8 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index 169ddad3157..eecfa5eba06 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -218,24 +218,17 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
 	 * sync to pclk, half-word transfers to the IIS-FIFO. */
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		s3c2410_dma_devconfig(prtd->params->channel,
-				S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
-				S3C2410_DISRCC_APB, prtd->params->dma_addr);
-
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_SYNC_PCLK |
-				S3C2410_DCON_HANDSHAKE);
+				      S3C2410_DMASRC_MEM,
+				      prtd->params->dma_addr);
 	} else {
-		s3c2410_dma_config(prtd->params->channel,
-				prtd->params->dma_size,
-				S3C2410_DCON_HANDSHAKE |
-				S3C2410_DCON_SYNC_PCLK);
-
 		s3c2410_dma_devconfig(prtd->params->channel,
-					S3C2410_DMASRC_HW, 0x3,
-					prtd->params->dma_addr);
+				      S3C2410_DMASRC_HW,
+				      prtd->params->dma_addr);
 	}
 
+	s3c2410_dma_config(prtd->params->channel,
+			   prtd->params->dma_size);
+
 	/* flush the DMA channel */
 	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
 	prtd->dma_loaded = 0;
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 3f44150d8e3..1d70829464e 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1389,6 +1389,9 @@ int snd_soc_init_card(struct snd_soc_device *socdev)
 	snprintf(codec->card->longname, sizeof(codec->card->longname),
 		 "%s (%s)", card->name, codec->name);
 
+	/* Make sure all DAPM widgets are instantiated */
+	snd_soc_dapm_new_widgets(codec);
+
 	ret = snd_card_register(codec->card);
 	if (ret < 0) {
 		printk(KERN_ERR "asoc: failed to register soundcard for %s\n",
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 2b302bbffe7..12522e6913d 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -27,6 +27,11 @@ MODULE_DESCRIPTION("Core sound module");
 MODULE_AUTHOR("Alan Cox");
 MODULE_LICENSE("GPL");
 
+static char *sound_nodename(struct device *dev)
+{
+	return kasprintf(GFP_KERNEL, "snd/%s", dev_name(dev));
+}
+
 static int __init init_soundcore(void)
 {
 	int rc;
@@ -41,6 +46,8 @@ static int __init init_soundcore(void)
 		return PTR_ERR(sound_class);
 	}
 
+	sound_class->nodename = sound_nodename;
+
 	return 0;
 }
 
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index ecb58e7a624..4bd3a7a0edc 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -423,7 +423,7 @@ static int set_ctl_value(struct usb_mixer_elem_info *cval, int request, int vali
 	value_set = convert_bytes_value(cval, value_set);
 	buf[0] = value_set & 0xff;
 	buf[1] = (value_set >> 8) & 0xff;
-	while (timeout -- > 0)
+	while (timeout-- > 0)
 		if (snd_usb_ctl_msg(cval->mixer->chip->dev,
 				    usb_sndctrlpipe(cval->mixer->chip->dev, 0),
 				    request,
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index f0f7624f917..f6f201eb24c 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1989,7 +1989,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	USB_DEVICE(0x0ccd, 0x0028),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.vendor_name = "TerraTec",
-		.product_name = "Aureon 5.1 MkII",
+		.product_name = "Aureon5.1MkII",
 		.ifnum = QUIRK_NO_INTERFACE
 	}
 },